/srv/irclogs.ubuntu.com/2006/07/29/#ubuntu.txt

J-_	gah torches hard drive	12:01
Samus_Aran	jrib: myspell-en-gb is already the newest version. myspell-en-au is already the newest version. myspell-en-us is already the newest version.	12:01
Samus_Aran	jrib: yes, there is an ABC	12:01
=== bytefu [n=bytefu@cpe-66-68-125-239.austin.res.rr.com] has joined #ubuntu
gnomefreak	ronald: what do you need?	12:01
rdemanow	Is there a way to get GRUB to recognize and respond to a USB keyboard? I don't have a ps/2 keyboard for this box and I need to multi-boot it ...	12:01
=== Oompa [n=mike@c-67-166-234-98.hsd1.tx.comcast.net] has joined #ubuntu
=== smegol [n=barawiec@pdpc/supporter/base/smegol] has joined #ubuntu
sagarp	when i run gnome-font-properties, i can change all my fonts, EXCEPT "application font" ...it remains the same as before	12:02
=== PokerFacePenguin [n=joe@68.16.12.80] has joined #ubuntu
=== lhds [n=lhds@82.198.0.196.satgate.net] has joined #ubuntu
Samus_Aran	jrib: but if I select "ABC - English (UK)" it immediately reverts to the "English (Canada)" or "ABC - English (Australia)", whichever I had last selected	12:02
neutrinomass	doctormo: Well if it works in windows out of the box, it should be NTFS ... of course 'df -T' doesn't help? Pastebin the output of 'dmesg' .... Are you sure it's not a damaged filesystem ?	12:02
lhds	hey there people of the world i need help	12:02
ronald	Gnomefreak I was talking om #ubuntu-nl and Seveas banned me for nu reason	12:03
ronald	for no good reason that is	12:03
Jack_Sparrow	gnomefreak: dosent ban people for NO reason	12:03
Seveas	ronald, that's quite an odd definition of no good reason	12:03
Samus_Aran	jrib: thank you kindly for your help, by the way. this has been an issue since I switched to Ubuntu	12:03
Jack_Sparrow	gnomefreak: sorry	12:03
gnomefreak	Jack_Sparrow: i didnt ban him ;)	12:03
Seveas	ronald, and this is not an escalation channel for problems in other channels	12:03
Samus_Aran	jrib: and "English (Australia)" is a far better dictionary for me than ""	12:03
gnomefreak	brb reboot	12:03
Jack_Sparrow	My fault	12:04
jrib	Samus_Aran: I see what you mean, I change mine to UK, restart OO and it shows up as USA again. There must be something we are missing...	12:04
=== PokerFacePenguin [n=joe@68.16.12.80] has joined #ubuntu
ardchoille	ronald: Just my opinion, but i feel it's best to bring that up with the ops in pm rather than bring it to another (quite busy) channel.	12:04
doctormo	neutrinomass: so how would I reformat it to FAT32?	12:04
=== CrazyMonkey\|AFK is now known as CrazyMonkey
=== Senesence [n=senesenc@ool-4354af9b.dyn.optonline.net] has joined #ubuntu
J-_	so, 10 more minutes and it'll be an hour since i've been applying all lsited operations(formatting ext. hdd into ext3)	12:04
=== smegol [n=barawiec@pdpc/supporter/base/smegol] has left #ubuntu ["Wannabie"]
Samus_Aran	jrib: hm	12:04
J-_	man, this sucks	12:04
=== Pseudonym [n=weeaboo@ip70-190-210-97.ph.ph.cox.net] has joined #ubuntu
lhds	i try to make in the video4linux folder i get error missing directory stop	12:04
Senesence	How do I run an executable from terminal?	12:04
Samus_Aran	jrib: perhaps the package that has the English UK dictionary is broken ?	12:04
jrib	Samus_Aran: I can't even make the default language for my documents stay as UK	12:05
Samus_Aran	jrib: english Australia and USA work here, I just tried both	12:05
fausto_	And now one more question. I installed VMWare and installed Windows XP as a virtual disk (it works like a charm!) but I am unable to get it to connect it to the internet. I have tried both bridge and NAT and neither of them can get windows to get an IP address or so much as recognize that it's on a network. Anyone have a link or want to walk me through that?	12:05
Samus_Aran	the package is called EN-GB, perhaps the "UK" is confusing it	12:05
ronald	Seveas sayd that easy-ubuntu does no good to youre resources. I dont no if that is true. So I say. Don't know if tha's true. And then he sayd that i was irritating him End banned me	12:06
=== Cntryboy [n=cd@host-216-78-31-59.tys.bellsouth.net] has joined #ubuntu
=== Renan_s2 [n=Renan@201.22.222.7.adsl.gvt.net.br] has joined #Ubuntu
Samus_Aran	though there is no English (Great Britain) in the list ..	12:06
Seveas	ronald, and that is a complete lie	12:06
Jack_Sparrow	ronald: Are you looking to get banned from two channels?	12:06
J-_	anyone want to help me in a pm, formatting my external hard drive to ext3 using the terminal since gparted isn't working, and probably frying my hard drive.	12:06
seeker__	http://www.rootkit.nl/articles/rootkit_hunter_faq.html <-- is this worth installing?	12:06
ardchoille	ronald: As far as this channel is concerned, that is off topic.	12:07
Seveas	ronald, and this is not an escalation channel for problems in other channels	12:07
Samus_Aran	fausto_: have you installed the VMware tools in the virtual machine ? they contain the ethernet driver for XP	12:07
Senesence	Can anyone tell me how to run an executable from terminal??	12:07
Renan_s2	!mp3	12:07
ubotu	For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats	12:07
Pseudonym	OK: A question is there a way to use animated gifs as an animated desktop with either GNOME or KDE?	12:07
Seveas	Senesence, just type it's name	12:07
ardchoille	Senesence: What is the file extension?	12:07
jrib	Senesence: /path/to/executable	12:07
mkns	Senesence - did you get an answer?	12:07
Senesence	Thanks all	12:07
mkns	apparently you did	12:07
=== rdemanow [n=rdemanow@c-24-63-252-34.hsd1.nh.comcast.net] has left #ubuntu []
Samus_Aran	fausto_: and did both the VMware kernel modules compile successfully ? there is one module for VMware's main features, and another module just for the networking. it might be possible that only the main one compiled	12:08
=== runge [n=runge@c-54d8e255.215-5-64736c10.cust.bredbandsbolaget.se] has joined #ubuntu
=== XVampireX [n=XVampire@89.0.235.70.dynamic.barak-online.net] has joined #ubuntu
fausto_	Ooh. I see. I don't think I got the networking module completed	12:08
ronald	Seveas i don't see the problem in this sorry	12:08
mkns	in addition to those mentioned already - if you are in the directory where the executable resides, you need to put ./ before it - such as in ./ifconfig	12:08
Samus_Aran	fausto_: I use VMware here without issue, after installing the kernel-headers package that matches my running kernel, and compiling the two modules using the install Perl script	12:08
J-_	guess no one wants to help me. heh.	12:08
=== Kr0ntab [n=Kr0ntab@unaffiliated/Kr0ntab] has joined #Ubuntu
fausto_	And how would I install the second module? Would I have to start over?	12:08
=== mode/#ubuntu [+o Seveas] by ChanServ
=== ronald [n=ronald@ip20-164-208-87.adsl2.versatel.nl] has left #ubuntu [requested]
=== mode/#ubuntu [-o Seveas] by ChanServ
Samus_Aran	fausto_: run the install script again, and take close notice if it builds both modules successfully. it does them right after another	12:09
=== ronald [n=ronald@ip20-164-208-87.adsl2.versatel.nl] has joined #ubuntu
Samus_Aran	fausto_: you can just install overtop of the last VMware install. it won't affect your virtual machines	12:09
fausto_	But won't that install the entire thing twice?	12:09
fausto_	Ok	12:09
=== mwe [n=mwe@port462.ds1-ynoe.adsl.cybercity.dk] has joined #ubuntu
fausto_	Cool.	12:09
jrib	Samus_Aran: oh I missed it, do you notice the checkbox that says "For the current document only", is taht grayed out for you as well in default doc lang settings?	12:09
Cntryboy	Does anyone know a chat client for yahoo that isn't bootable? script kiddes are boring me	12:09
=== neoncode [n=neoncode@unaffiliated/neoncode] has joined #ubuntu
Samus_Aran	fausto_: it will ask you if you want to reconfigure your network during the reinstall, select "yes" and choose NAT (connected through your GNU/Linux PC) or bridged (direct net connection, as if it had its own real NIC)	12:10
=== caplink811-log is now known as caplink811_log
Samus_Aran	jrib: yes, it is grayed out	12:10
fausto_	Which one should I choose if I want it to share files with linux through samba? (yet another thing that will drive me crazy)	12:10
mwe	Cntryboy: I think gaim is pretty secure	12:10
=== ablomen [n=ablomen@ipd50a6820.speed.planet.nl] has joined #ubuntu
ardchoille	Cntryboy: I have heard some folks in this channel use gaim for yahoo chats	12:11
Cntryboy	mwe: gaim sucks	12:11
Cntryboy	lol	12:11
ardchoille	lol	12:11
Senesence	I'm in the directory where the program is located. I just type the name of the program to run it then right? Well it didn't work, just says unknown command.	12:11
J-_	anyone want to help me in a pm, formatting my external hard drive to ext3 using the terminal since gparted isn't working	12:11
Cntryboy	i've tried gyach, gaim, and kopete and all are getting trashed by linux script kiddies in yahoo	12:11
ardchoille	mwe: I guess you and I don't know much, lol	12:11
Samus_Aran	Pseudonym: what I would do is convert the GIF into individual frames, then turn them into an MPEG-1 video with mencoder. you can play it onto your root window with MPlayer using the options: -rootwin -loop 0	12:11
Cntryboy	they hate my cntryboy id so they do it for fun	12:12
ompaul	Senesence, do this ls -al program and return what ever value it has	12:12
Jack_Sparrow	J-_: HAve you tried qtparted in gui?	12:12
mwe	Cntryboy: kopete maybe then	12:12
=== willmc [n=willmc@1-1-7-19a.ars.sth.bostream.se] has joined #ubuntu
mwe	ardchoille: heh	12:12
=== aceri [n=aceri@ac3ri.pod.cvut.cz] has joined #ubuntu
mkns	Senesence - my comment before will help you - put ./ before the name of your executable	12:12
Pseudonym	Samus_Aran, I would play the "doo doo doo da doo doo doo" missle finding sound right now, but I don't think x-chat would send it to you...	12:12
ompaul	mkns, if it is set executable	12:12
Samus_Aran	fausto_: bridged and NAT should both be able to do that, though bridged would be "more normal"	12:12
=== DarkAudit [n=bpack@morgantownwv-c2-68-69-153-74.pittpa.adelphia.net] has joined #ubuntu
J-_	Jack_Sparrow: gksudo gparted?	12:13
=== fserb [n=fserb@201-42-176-61.dsl.telesp.net.br] has joined #ubuntu
mkns	so if the executable is abcde	12:13
Samus_Aran	fausto_: when you use NAT, it creates a subnet with only your VMware machines and your GNU/Linux host in it	12:13
Jack_Sparrow	J-_: no	12:13
mkns	ompaul - yes, but he's not even getting that far as he's atempting to find it in his path	12:13
Cntryboy	mwe: I told ya I tried all 3 they all suckorz	12:13
J-_	no i haven't	12:13
Cntryboy	lol	12:13
fausto_	Bridged sounds like fun.	12:13
ompaul	mkns, I think it is python so python ./foo	12:13
mwe	Jack_Sparrow: how does gparted not work? did you run it with gksudo?	12:13
Jack_Sparrow	J-_: get qtparted apt-get synaptic etc	12:13
Senesence	mkns: Thank you that worked	12:13
Cntryboy	mwe: surely linux has something where a windows script kiddy can't boot em if not well laughs at linux proggys	12:13
=== wildman_ [n=wildman@24-187-231-201.fibertel.com.ar] has joined #ubuntu
J-_	okay, will do	12:14
mkns	python foo will also work - i think you only need ./ if you are not telling it what to run it with	12:14
Samus_Aran	Pseudonym: before you convert the GIF into PNGs or TIFFs (with "convert"), you may want to see if MPlayer can play animated GIFs natively .. it can play almost everything else, wouldn't surprise me	12:14
=== Dimitrije [n=Dimitrij@212-200-200-95.smin.sezampro.yu] has joined #ubuntu
=== Ndaipori [n=savirc@161-131-13-204.erd.cust.wirelessbeehive.com] has joined #ubuntu
mkns	Senesence - np	12:14
Jack_Sparrow	mwe: they both work for me	12:14
fausto_	Ok. Thanks samus!	12:14
fausto_	Have a good one.	12:14
ardchoille	mkns: Yeah, I think you're right on that	12:14
mwe	Jack_Sparrow: oh it was J-_ sorry	12:14
Dimitrije	mkns, hi i am the guy with gnome-ppp and everything you told me was good but now i get another error :D	12:14
ompaul	Cntryboy, if it is not a bug and you can;t use it maybe change the way your trying to interact with it	12:14
Jack_Sparrow	np :)	12:14
mkns	Dimitrije - at least you've made some progress	12:14
Senesence	mkns: Is there a way to modify the program shortcut on the desktop to run with console when opened?	12:15
Dimitrije	Now it says that gtk+-2.0	12:15
mkns	what is your new error	12:15
Dimitrije	Ups...	12:15
=== wayward [n=wayward@ppp-70-231-125-128.dsl.bltnin.ameritech.net] has joined #ubuntu
cr3	is there a way to specify the xconfig resolution when installing Ubuntu?	12:15
Samus_Aran	Pseudonym: I just tried, and on my system it brings up the first frame of the animated GIF, and then proceeds to sit there doing nothing, heh	12:15
Jack_Sparrow	mwe: he was having trouble with the one app so I thought we should try a different one a gui one	12:15
mkns	yes, look at the properties of the shortcut and tick the checkbox	12:15
mkns	a UPS?	12:15
mwe	J-_: how does gparted not work? did you run it with gksudo?	12:15
ardchoille	!fixres > cr3	12:15
Dimitrije	Now it says that gtk+-2.0 >= 2.4.0 and libglade-2.0 >= 2.4.0 are not met...	12:15
Cntryboy	ompaul: I remember ages ago a friend used a command written yahoo client that couldn't get booted	12:15
Cntryboy	not sure what it was though	12:16
CyberWinXP	Does Vim include a built-in terminal?	12:16
=== azrael0 [n=azrael@c-66-41-152-252.hsd1.mn.comcast.net] has joined #ubuntu
mkns	Dimitrije - out of interest, what is it you are attempting to do overall?	12:16
Zambezi	Is anyone here skilled on lftp?	12:16
Dimitrije	Install gnome-ppp.	12:16
=== wildman_ is now known as wildman
=== Senesence [n=senesenc@ool-4354af9b.dyn.optonline.net] has left #ubuntu []
ompaul	CyberWinXP, it runs in a terminal	12:16
mkns	ah - i see	12:16
=== wildman [n=wildman@24-187-231-201.fibertel.com.ar] has left #ubuntu ["Ex-Chat"]
Dimitrije	And connect on the internet over ubuntu and intel 536 ep modem.	12:16
ardchoille	CyberWinXP: vim is an app that runs i a term	12:16
Pseudonym	http://tmp.4chan.org/wg/src/1153888820269.gif << Thanks Samus_Aran, firend wants to use this as a desktop. :3	12:16
=== AlinuxOS [n=alinux@d83-176-118-115.cust.tele2.it] has joined #ubuntu
ompaul	CyberWinXP, u can shell out of it if you need to	12:17
Pseudonym	I suppose it would be good for me to learn as well.	12:17
CyberWinXP	Ompaul, what if I want to compile the file I am working on?	12:17
=== chrisjw [n=chrisjw@unaffiliated/chrisjw] has joined #ubuntu
micahcowan	CyberWinXP, if you're asking about xvim or gvim, the answer is no.	12:17
=== Flyoc_ [n=flyin_do@APlessis-Bouchard-153-1-81-46.w86-203.abo.wanadoo.fr] has joined #ubuntu
mkns	Dimitrije - so can you d/load those packages, burn them and reboot again?	12:17
=== yamathan [n=chatzill@66-226-112-59.adams.net] has joined #Ubuntu
micahcowan	CyberWinXP, :make is the usual command.	12:17
=== yamathan is now known as Chicory
=== asw [n=asw@karuna.med.harvard.edu] has joined #ubuntu
ompaul	CyberWinXP, get a real terminal applications accessories terminal	12:17
=== ThunderStruck [n=ThunderS@ubuntu/member/gnomefreak] has joined #ubuntu
Dimitrije	Of course, but i hope they are not more than 40mb...	12:17
Samus_Aran	Pseudonym: if GIF playback doesn't work, just convert it to an MPEG-1 file, it uses the least CPU during playback	12:17
=== live [n=live@mediatux.com] has joined #ubuntu
micahcowan	CyberWinXP, you can also run shell commands (wihtout a terminal)	12:17
jrib	Samus_Aran: I have to go now, but here are my thoughts: the ubuntu build my grab the language from elsewhere (locale settings?), you may be able to do this: http://www.oooforum.org/forum/viewtopic.phtml?p=157058 good luck	12:17
Chicory	Is there anywhere that I could find a default sources.list for apt-get?	12:18
CyberWinXP	What about python or C++?	12:18
=== Ace2007 [n=ace@80-47-38-251.lond-hex.dynamic.dial.as9105.com] has left #ubuntu ["Konversation]
ompaul	!easysource > Chicory	12:18
Samus_Aran	jrib: thank you very much for your help	12:18
CyberWinXP	g++ inputfile.cpp -o inputfile	12:18
Pseudonym	Samus_Aran, I need to convert each frame to seperate pictures... than encode it?	12:18
CyberWinXP	Can I do that?	12:18
ardchoille	ompaul: You're quick! :)	12:18
ompaul	CyberWinXP, in a real terminal	12:18
Chicory	Thanks, ompaul!	12:18
=== helfrez [n=helfrez@166-82-112-61.quickclick.ctc.net] has joined #ubuntu
ompaul	ardchoille, can be	12:18
micahcowan	CyberWinXP, :!g++ inputfile.cpp -o inputfile	12:18
Samus_Aran	Pseudonym: convert can dump all frames of the GIF into PNG images, and those can be converted into MPEG-1 with mencoder	12:18
=== sonotos [n=sonotos@p54A30519.dip0.t-ipconnect.de] has joined #ubuntu
Chicory	I forgot that the generator made default souces.list's, too.	12:19
=== IRCMonkeyx [n=chatzill@85.99.81.122] has joined #ubuntu
=== SUSaiyan [n=susaiyan@cc84863-b.zwoll1.ov.home.nl] has joined #ubuntu
Pseudonym	Samus_Aran, convert is a function of gimp, or a coomandline tool?	12:19
CyberWinXP	Micahcowan, oh yeahhhhh!	12:19
=== medfly [n=som1@87.69.99.197] has joined #ubuntu
IRCMonkeyx	hi again , what is GTK, is it Gnome T... K...?	12:19
=== hussam [n=hussam@194.146.153.38] has joined #ubuntu
=== dcordero [n=dcordero@98.Red-83-40-113.dynamicIP.rima-tde.net] has joined #ubuntu
Samus_Aran	Pseudonym: convert osaka.gif osaka.png	12:19
Renan_s2	IRCMonkeyx, GIMP ToolKit	12:19
wayward	GTK = Graphics ToolKit	12:19
ompaul	CyberWinXP, use a shell for simplicities sake get a feel for the output can be handy for debugging	12:19
=== mwe [n=mwe@port462.ds1-ynoe.adsl.cybercity.dk] has joined #ubuntu
wayward	whoops	12:19
CyberWinXP	Thanks, micahcowan and ompaul.	12:19
wayward	yeah, GIMP	12:19
=== harisund_ is now known as harisund
=== VR_ [i=vr@49-110.200-68.tampabay.res.rr.com] has joined #ubuntu
Pseudonym	Thanks so much Miss Aran.	12:19
Samus_Aran	Pseudonym: and it will give you osaka-0.png osaka-1.png etc.	12:19
micahcowan	CyberWinXP, if you do it a lot, you might want to create a function or keybinding and stick it in your vimrc; though I'd probably prefer to write a short Makefile and use :make instead	12:20
=== M3t4ll1k0 [n=lokoloko@cm136166.red.mundo-r.com] has joined #ubuntu
medfly	should i have a problem if i install xfree86?	12:20
Samus_Aran	Pseudonym: then you just tell mencoder to turn those framed into an MPEG-1 movie with mencoder	12:20
Samus_Aran	*frames	12:20
=== dodgyville [n=dodgyvil@cor8-ppp1565.mel.dsl.connect.net.au] has joined #ubuntu
mkns	i'm thinking you might be wanting to get a DVD with a full set of packages on it, otherwise you could be rebooting dozens of times to get your internet connection going	12:20
wayward	So, do we finally know what was the cause of last week's servers' outage?	12:20
dodgyville	Good morning	12:20
=== ompaul <-- the guy who does silly things like reactor.coonectTCP and can't see the error ;-)
dcordero	hi, i have install the source of kernel-image-2.6.15-26, and i have now the original kernel and a diff with the change for patch in /src/src/... how can i apply the patch .diff to the kernel???	12:20
IRCMonkeyx	Renan_s2: hi renan, what is GIMP :) , is it the program like photoshop in linux ?	12:20
=== lasindi[lappy] [n=lasindi@198.68.30.48] has joined #ubuntu
Renan_s2	IRCMonkeyx, yes	12:20
=== lukasz23 [n=lukasz23@gw-ww.telsten.com] has joined #ubuntu
mkns	Dimitrije - where did you install ubuntu from? a dvd?	12:21
Dimitrije	CD :D	12:21
lasindi[lappy]	Hi all, is there a log file in Ubuntu that tracks who logs in when on the machine?	12:21
=== marccd [n=marccd@adsl-68-125-23-223.dsl.irvnca.pacbell.net] has joined #ubuntu
dodgyville	I'm trying to format an SD card using gparted to fat32, but it fails without giving me a proper message. I can format it fat16 or ext3 no probs.	12:21
ompaul	lasindi[lappy] , use the command last	12:21
=== sonotos [n=sonotos@p54A30519.dip0.t-ipconnect.de] has joined #ubuntu
Dimitrije	I will get drapper in a few days. Just wanted to try it a little :)	12:21
Chicory	Holy crap! o_o	12:21
helfrez	its not as free as beer as Gimp but Xara Xtreme is also a awesome tool for graphics and has photoshop plugin support	12:21
=== marccd [n=marccd@adsl-68-125-23-223.dsl.irvnca.pacbell.net] has left #ubuntu ["Dos]
lasindi[lappy]	ompaul: ah, thanks	12:21
Chicory	I must have really neglected some of these updates O-o	12:21
medfly	should i have a problem installing xfree86 or going back to xorg once i do?	12:21
Renan_s2	helfrez, Xara Xtreme is vectorial, GIMP is bitmap (raster)	12:22
mwe	dodgyville: aren't they usually fat16?	12:22
Pseudonym	Samus_Aran, I do not have a "convert" command... what do I need to install for it?	12:22
mkns	i think you need to wait the few days then tbh	12:22
=== sedeki [n=sedeki@c-db83e255.179-4-64736c10.cust.bredbandsbolaget.se] has joined #ubuntu
mkns	it's not going to be worth the pain in the meantime	12:22
Samus_Aran	Pseudonym: ImageMagick	12:22
=== nlindblad [n=nlindbla@user179.217-10-120.netatonce.net] has joined #ubuntu
ardchoille	Pseudonym: sudo apt-get install imagemagick	12:22
=== Chicory is now downloading 139 megs' worth of updates.
Chicory	Thanks, ompaul!	12:22
helfrez	Renan_s2: not nec, true Xara does raster also	12:22
=== mc44 [n=rddpr@ip-81-1-83-32.cust.homechoice.net] has joined #ubuntu
J-_	Jack_Sparrow: i've had gparted running for the past hour, it's still formatting the drive into ext3, it's a 300GB hard drive	12:22
medfly	mwe, afaik, no	12:22
=== mc44 [n=rddpr@ip-81-1-83-32.cust.homechoice.net] has left #ubuntu ["Leaving"]
ompaul	Chicory, have fun	12:22
Pseudonym	Thanks again...	12:22
Dimitrije	Ok i will wait, thanks for your help again.	12:22
mkns	np	12:23
IRCMonkeyx	Renan_s2: if so, why does it write releated gimp things(GTK), when i write man -k gksudo ?? what relation between gimp and gksudo ??	12:23
mwe	medfly: hmm. usb sticks are I think	12:23
Renan_s2	IRCMonkeyx, GTK is a general-purpose library	12:23
=== dcordero [n=dcordero@98.Red-83-40-113.dynamicIP.rima-tde.net] has left #ubuntu []
=== PKR_ [n=fredrik@dlby-dbyx-sr0-vl100-217-72-52-74.perspektivbredband.net] has joined #ubuntu
medfly	mwe, well, i had about three, they were all fat32	12:23
Samus_Aran	Pseudonym: welcome. I don't know the command for mencoder off-hand for MPEG-1, only to make an XviD/DivX file	12:23
Renan_s2	can be used for many things beyond GIMP	12:23
wayward	IRCMonkeyx, GTK+ was originally written to support the creation of GIMP	12:23
Samus_Aran	Pseudonym: it will be very basic, though	12:23
wayward	only later was it extended to cover the entire desktop.	12:23
mwe	medfly: I see. I guess I'm mistaken then	12:23
Samus_Aran	MPEG-1 has way less encoding options than XviD/DivX	12:23
PKR_	anybody know where i can find drivers for my sound card?	12:23
IRCMonkeyx	i see, thanx	12:24
mwe	PKR_: what card?	12:24
=== joh_ is now known as joh
=== execve [n=bann3d@host86-139-42-127.range86-139.btcentralplus.com] has joined #ubuntu
mwe	PKR_: they are all included in the modules that are installed with the kernel	12:24
PKR_	mwe: SBLive! 5.1 Model SB0100	12:24
mwe	PKR_: you already have that driver	12:25
mwe	PKR_: it's probably misconfigured	12:25
=== wayward [n=wayward@ppp-70-231-125-128.dsl.bltnin.ameritech.net] has left #ubuntu []
PKR_	mwe: the sound quality is bad.	12:25
dodgyville	mwe: Apparently not, fat32 is common too	12:25
mwe	dodgyville: I see	12:26
mwe	PKR_: how is it bad?	12:26
Jack_Sparrow	J-_: USB are not as fast as internals so it may still be working	12:26
Jack_Sparrow	dodgyville: I just did a google and those are fat16 and some software tools were needed (even in windows) to make them 32..	12:27
=== shawn_ [n=shawn@c-68-36-35-231.hsd1.nj.comcast.net] has joined #ubuntu
J-_	hmm yeah it just finished... wow, gotta see if this works now.	12:27
Jack_Sparrow	dodgyville: http://www.aximsite.com/boards/printthread.php?t=2597	12:27
shawn_	anyone know what the latest version of compiz is?	12:28
PKR_	mwe: when i listen to music there is some noise sometimes and my headphones work good on other computers.	12:28
Jack_Sparrow	J-_: See what being patient can do for you	12:28
=== StoneTable [n=stone@66.225.202.216] has joined #ubuntu
=== circuitbreaker [n=fabmayor@adsl-65-65-171-161.dsl.hstntx.swbell.net] has joined #ubuntu
Samus_Aran	Pseudonym: I just noticed that converting the GIF directly to PNG has problems, as in the GIF file each frame only has the differences (what has changed since the last frame). I think there's an option to make each frame whole, lemme see	12:28
circuitbreaker	Helloo!!!	12:28
=== someothernick [n=Ron@pool-72-85-201-14.bstnma.east.verizon.net] has joined #ubuntu
Pseudonym	Oh Samus_Aran, you are my hero.	12:29
sedeki	circuitbreaker hello	12:29
Phenax	PKR_: Most likely a messed up sound card, or messed up sound card drivers (Unless the headset has it's own 'sound card' in it)	12:29
IRCMonkeyx	!GTK	12:29
ubotu	gtk is the gimp toolkit, which forms the base of Gnome and a lot of other applications	12:29
=== live [n=live@mediatux.com] has left #ubuntu ["Leaving"]
J-_	Jack_Sparrow: i tried it last night with a small fat32 partition, and a bigger ext3 partition. it didn't work, so i assumed it wasn't going to work.	12:29
=== section3 is now known as section31
circuitbreaker	for real??	12:29
Jack_Sparrow	J-_: let us know	12:29
circuitbreaker	sey	12:29
=== papa [n=papa@115.Red-81-44-181.dynamicIP.rima-tde.net] has joined #ubuntu
=== Jenkens [n=j0okie@c-24-9-24-14.hsd1.co.comcast.net] has joined #ubuntu
StoneTable	Does anyone know how to use a custom module w/linux-restricted-modules? It loads /lib/modules/`uname -r`/volatile at boot, and I need to replace one of the files in volatile	12:29
circuitbreaker	So How is UBUNTU working for yall??? because im new at this linux os systems stuff!!!??	12:30
PKR_	ok	12:30
Renan_s2	works OK for me	12:30
medfly	great.	12:30
shawn_	my favorite so far	12:30
circuitbreaker	ok	12:30
shawn_	i used fedora 5 last	12:30
Phenax	I don't really like Ubuntu, but to each his own.	12:30
circuitbreaker	it suppose to be virus free right??	12:30
shawn_	damaged the fs 3 times	12:30
=== nosklo [n=nosklo@unaffiliated/nosklo] has joined #ubuntu
circuitbreaker	all linux software?	12:31
shawn_	until i swited to ubuntu	12:31
Renan_s2	today I tried Fedora Core. Didn't even get it to boot (hangs at "starting sshd")	12:31
dodgyville	Jack_Sparrow: I got it working. Excellent. I upgraded gparted	12:31
medfly	circuitbreaker, its not windows but we have our own troubles.	12:31
circuitbreaker	yea i guess u got that right	12:31
sedeki	circuitbreaker viruses is "much more" less common in linux than windows.	12:31
shawn_	circuit: not that that linuz doesn't have a virus community, but id say 98% of all known viri are geared towards windows	12:32
circuitbreaker	well, ill see how it goes with me, hopefully ill adapt to it just as i adapted windows	12:32
=== hedonistic [n=silver@72.169.80.56] has joined #ubuntu
circuitbreaker	yea, thats true.. its just like MACS no virus hassle	12:32
Jenkens	anyone here getting md5sums from debian repositories? http://axpr.net/?show=615	12:32
Jenkens	md5sum errors, that is	12:32
Jack_Sparrow	dodgyville: good for you	12:32
shawn_	does compiz / xgl have an official website? im having lots of troubles and can't find any help	12:32
=== Flyoc_ is now known as Flyoc
medfly	anyway, can i install xfree86 using the apt system thing? i cant find the right package.	12:33
=== beagleburt [n=beaglebu@202.89.42.216] has joined #ubuntu
=== Viper550 [n=viper550@d57-121-167.home.cgocable.net] has joined #ubuntu
Phenax	medfly: I'd say get X.org	12:33
Phenax	medfly: xfree86 is a bit.. dated	12:33
Jack_Sparrow	circuitbreaker: yes no virus, adware, spyware firewall problems	12:33
=== Algalord_Master [n=nestor@80.Red-83-35-181.dynamicIP.rima-tde.net] has joined #ubuntu
shawn_	medflyL xorg and try aptitude	12:33
Viper550	Have you seen some of these new Edgy Eft mockups? https://wiki.ubuntu.com/Artwork/Incoming/EdgyProposals/SetSample00	12:33
=== ThomazLeite [n=thomaz@200.217.151.183] has joined #ubuntu
Algalord_Master	hello!!!	12:33
circuitbreaker	jack, yea well yall have a good one guys i got places to be!! so long....!!	12:33
hedonistic	I get the following error when I try to join irc via gaim on my desktop running ubuntu: "SNAC threw error: Busted SNAC payload" - Anyone why this is? It's running fine right now on my laptop...	12:33
beagleburt	G'day all from New Zealand	12:34
pike_	shawn_: you might try #ubuntu-xgl	12:34
medfly	Phenax, my graphic card driver doesnt like xorg and im too lazy to figure out where to put everything	12:34
sedeki	beagleburt good day from Sweden!	12:34
Phenax	medfly: What graphic card driver?	12:34
=== ChocoCid [n=ChocoCid@r43h156.res.gatech.edu] has joined #ubuntu
=== rasemmi [n=rasemmi@dialin-145-254-087-161.pools.arcor-ip.net] has joined #ubuntu
shawn_	does compiz / xgl have an official website? im having lots of troubles and can't find any help	12:34
ardchoille	Viper550: Those are nice!	12:34
medfly	Phenax, its a VIA unichrome pro	12:34
=== chrisjw [n=chrisjw@unaffiliated/chrisjw] has left #ubuntu ["Leaving"]
micahcowan	Phenax: May 2006 is dated?	12:34
PKR_	how do i configure what programs should open certain files?	12:34
beagleburt	Anyone care to help me with "Kaffeine" & DVD's???	12:34
shawn_	PRK right click on the file, goto properties	12:35
medfly	micahcowan, well, its july :-)	12:35
Viper550	Yeah, those might be a pretty good preview of what to expect artwork wise, and also stay tuned for my new theme...	12:35
PKR_	thanks shawn_	12:35
shawn_	yup yup	12:35
ardchoille	PKR_: right click on a file, choose properties, go to the open with tab and set the app to open that file type	12:35
beagleburt	G'day sedeki	12:35
PKR_	thanks ardchoille	12:35
shawn_	pinke_ : i get ignored in that channel	12:35
J-_	Jack_Sparrow: yeah it worked, heh. thanks, now can i use fs-driver on xp to read/write to the ext3 external drive? and can i put windows executable files onto the drive without it going currupt?	12:35
Algalord_Master	anyone can help me about a conceptronic c54rc wireless problem?????	12:35
ardchoille	You're welcome :)	12:35
shawn_	pike*	12:35
medfly	Phenax, plus, if youre really looking for something, im using an AMD 64bit	12:36
=== klitklit [n=no@cpe-24-25-174-155.maine.res.rr.com] has joined #ubuntu
=== zerby [n=phoranix@84-104-97-17.cable.quicknet.nl] has joined #ubuntu
=== navilon [n=navilon@ppp-70-129-7-152.dsl.hstntx.swbell.net] has joined #ubuntu
=== Goldfisch [n=gregturn@user-0c6t46t.cable.mindspring.com] has joined #ubuntu
Jack_Sparrow	J-_: I have never used that fs driver. I would be careful of very large files and I would ask someone else about trying to execute windows files on an ext3 partition.. Seems scary	12:37
Phenax	medfly: I'm 90% sure that VIA Unichrome drivers are released and work for X.org	12:37
pike_	shawn_: change your nick to stacey and try again :)	12:37
PKR_	when i minimize windows you can see black triangles as the window minimizes, anybody know how to make the windows minimize faster?	12:37
medfly	Phenax, well, i got the driver from the VIA website	12:37
=== r0bby [n=wakawaka@guifications/user/r0bby] has joined #ubuntu
=== Goldfisch [n=gregturn@user-0c6t46t.cable.mindspring.com] has left #ubuntu ["Leaving"]
Phenax	medfly: Maybe check in a repository for drivers?	12:38
seeker__	anyone know how I can add seahorse to right click menu in nautilus?	12:38
=== teimu [n=tim@64.127.102.252] has joined #ubuntu
medfly	Phenax, theres a repository for drivers?	12:38
PKR_	*rectangles	12:38
Viper550	Did you kinda hate it when Human shifted back to Caramel after they went Orange for the debut of Ubuntulooks?	12:38
Phenax	The main repositories should have it?	12:38
ardchoille	seeker__: The right-click menu innautilus isn't customisable unless you're using nautilus scripts.	12:38
teimu	anyone know a good graphical repository browser?	12:38
seeker__	ardchoille: explain please	12:39
Jack_Sparrow	synaptic?	12:39
Phenax	via(4) updates from the Unichrome project, including DRI support	12:39
beagleburt	Anyone care to help me with "Kaffeine" & DVD's???	12:39
ChocoCid	the gnome package manager is pretty solid, teimu	12:39
neutrinomass	seeker__: I don't think it can be easily done ...	12:39
Phenax	That's on the Changes since 6.8 log	12:39
seeker__	ardchoille: how can I get it to decypt files using GUI?	12:39
seeker__	neoncode: i did it on Breezy	12:39
ardchoille	seeker__: That's a bit ot for this channel.. /join #jayden	12:39
seeker__	neoncode: cant remember how	12:39
=== Viper550 [n=viper550@d57-121-167.home.cgocable.net] has left #ubuntu ["Leaving"]
pike_	beagleburt: tried #kubuntu channel?	12:40
teimu	ChocoCid, can that be used for SVN?	12:40
Phenax	medfly: unichrome.sourceforge.net has X.org compatible drivers	12:40
Phenax	medfly: There's probably a deb laying around somewhere	12:40
ChocoCid	teimu : i have no idea :(	12:40
medfly	Phenax, thanks	12:40
J-_	Jack_Sparrow: heh okay. i won't install the executables, i'll just put them on dvd. just hope i can run fs driver on xp so i can get all the non exe's (backed up files) so i can install linux on both of my computers.	12:40
=== rasemmi [n=rasemmi@dialin-145-254-087-161.pools.arcor-ip.net] has left #ubuntu ["Verlassend"]
=== VR_ [i=vr@49-110.200-68.tampabay.res.rr.com] has left #ubuntu []
Jack_Sparrow	J-_: Putting the exe on the ext3 should be fine, just trying to run them from there would scare me	12:41
=== Cntryboy [n=cd@host-216-78-31-63.tys.bellsouth.net] has joined #ubuntu
=== Anti-Tedd [n=na@pool-162-83-154-129.ny5030.east.verizon.net] has joined #ubuntu
Jack_Sparrow	J-_: careful of files over 2 gig	12:41
beagleburt	pike_: ok t.a. - will do 'bye, 'bye for now	12:42
ardchoille	seeker__: Oh, ok, I misunderstood you. Nautilus runs kinda like a daemon, you need to exit nautilus and re-run it so it can pick up Seahorse for the context menu.	12:42
seeker__	ardchoille: ot?	12:42
ardchoille	seeker__: I thought you meant creating a special menu tree in nautilus	12:42
Cntryboy	mwe: you still here?	12:42
mwe	Cntryboy: yeah	12:42
=== braindead_moron [n=richard@c-71-205-13-127.hsd1.mi.comcast.net] has joined #ubuntu
=== tuvok302 [n=tuvok302@clgrtnt3-port-224.dial.telus.net] has joined #ubuntu
Cntryboy	have you ever gotten the exten. pref for gaim?	12:43
Cntryboy	the plugin?	12:43
J-_	Jack_Sparrow: okay. don't think i have anything over 2gig's, but with all the files i do have it all accumilates just under 100gb's of data	12:43
mwe	Cntryboy: no	12:43
mwe	Cntryboy: I don't know it	12:43
Jack_Sparrow	J-_: You will be fine.. glad it worked out	12:43
braindead_moron	running 6.06 on a laptop, I want to disable the CPU scaling so my CPU always runs full speed. Can anyone tell me how?	12:43
Cntryboy	do u know how to do source?	12:43
seeker__	ardchoille: i installed seahorse, but it doesnt appear in nauitlus	12:43
Cntryboy	I mean last time I did it I just sudo make then make install	12:43
Cntryboy	but this is talking about ./configure	12:43
=== tuvok302 [n=tuvok302@clgrtnt3-port-224.dial.telus.net] has left #ubuntu ["Leaving"]
ardchoille	seeker__: Nautilus runs kinda like a daemon, you need to exit nautilus and re-run it so it can pick up Seahorse for the context menu.	12:43
mwe	Cntryboy: ./configure first	12:44
Cntryboy	do i have to do any funky commands	12:44
=== zerby_ [n=phoranix@84-104-97-17.cable.quicknet.nl] has joined #ubuntu
Jenkens	anyone here getting md5sum errors from debian repositories? http://axpr.net/?show=615	12:44
=== hedonistic [n=silver@72.169.80.56] has left #ubuntu []
seeker__	ardchoille: I rerun it, yet it still not appear	12:44
J-_	Jack_Sparrow: thanks again dude, much appreciated!	12:44
Jack_Sparrow	J-_: any time.. glad to help	12:44
ardchoille	Jenkens: You using debian repos in Ubuntu?	12:44
mwe	Cntryboy: usually ./configure && make && sudo make install or sudo checkinstall	12:44
Cntryboy	or ./configure does it all auto	12:45
ardchoille	seeker__: You have to killall nautilus for it to stop completely, the run nautilus again	12:45
Jenkens	ardchoille: no, i'm using debian. but i know folks using ubuntu using debian repos, hence why i'm in here asking	12:45
ardchoille	seeker__: Or log out and back in	12:45
ardchoille	Jenkens: Ah, ok	12:45
Jack_Sparrow	braindead_moron: most people need to add scaling for laptops, are you sure it is not running full speed	12:45
=== tenshiKur0 [n=tenshiKu@p54BF713B.dip.t-dialin.net] has joined #ubuntu
Cntryboy	mwe: I got errors, care if I paste the ./configure error in pastebin?	12:45
mwe	Cntryboy: no go ahead	12:46
=== r0bby [n=wakawaka@cpe-24-161-52-23.hvc.res.rr.com] has joined #ubuntu
Cntryboy	k thx	12:46
Cntryboy	mwe: http://pastebin.ca/104507	12:46
seeker__	ardchoille: kill all doesnt work either! I still dont have seahorse appear! any other ideas?	12:47
TheMoebius	is there a way to get evolution to actually delete an email or move it to the trash instead of just crossing it out?	12:47
ardchoille	seeker__: did you use killall or kill all ?	12:47
Cntryboy	mwe: seems it can't find my gaim or something	12:47
=== smokeyd [n=admin@droev209.athome242.wau.nl] has joined #ubuntu
mwe	Cntryboy: gaim.pc	12:48
=== Android [n=Android_@85-210-145-95.dsl.pipex.com] has joined #ubuntu
braindead_moron	Jack_Sparrow, Gnome installed with a CPU scaling monitor on the toolbar, and it shows it dropping down to 1ghz (i've got a core duo) and when the applet sais 2.16ghz the fan is screaming like a banshi, so I'm guessing the scaling is working	12:48
Cntryboy	mwe: so what do I do? and what is gaim.pc	12:48
mwe	Cntryboy: install gaim-dev	12:48
smokeyd	hi all, where can I find which packages are included in the ubuntu distribution	12:48
=== Sonderblade [n=meh@c-0a5ae353.131-1-64736c10.cust.bredbandsbolaget.se] has joined #ubuntu
Jack_Sparrow	braindead_moron: cool...	12:48
mwe	Cntryboy: then retry	12:48
ardchoille	!packages	12:48
J-_	Jack_Sparrow: one more question til i come around again =D is there anything better than fs driver to get access on xp with ext3?	12:48
Cntryboy	mwe: but I have gaim though	12:48
ubotu	You can browse and search for Ubuntu packages using !Synaptic, !Adept, apt-cache, the "apt:/" URL in KDE, or online at http://packages.ubuntu.com - Ubuntu has about 18000 packages available, so please search for an official package before installing things in awkward ways!	12:48
ChocoCid	smokeyd : you mean the ones installed, or the ones that are available?	12:48
mwe	Cntryboy: but not gaim-dev	12:49
=== RobNyc_C [n=boethius@nylug/member/RobNyc] has joined #ubuntu
Cntryboy	mwe: whats the difference?	12:49
Jack_Sparrow	J-_: The best soultion I know is to use fat32 and no driver...	12:49
ChocoCid	the ones that are available are everything under gnome package manager, apt, and synaptic..	12:49
=== tanghus [n=tol@0x50a45014.boanxx14.adsl-dhcp.tele.dk] has joined #ubuntu
ardchoille	smokeyd: ^^^	12:49
smokeyd	the one ubotu talked about :) The ones which are available	12:49
ChocoCid	and yeah, what ubotu said :\	12:49
=== navilon__ [n=navilon@ppp-70-128-92-102.dsl.hstntx.swbell.net] has joined #ubuntu
Jack_Sparrow	J-_: I know you had a problem trying to format it as fat32	12:49
mwe	Cntryboy: gaim-dev provides the headers and stuff for compiling	12:49
=== StoneTable [n=stone@66.225.202.216] has left #ubuntu []
smokeyd	thanks	12:50
=== fserb [n=fserb@200-161-114-18.dsl.telesp.net.br] has joined #ubuntu
=== decrypt [n=ronald@ip20-164-208-87.adsl2.versatel.nl] has joined #ubuntu
=== genbie [n=hathal@host86-143-114-116.range86-143.btcentralplus.com] has joined #ubuntu
smokeyd	got it. Wanted to see if darcs is in there. But I need the multiverse packages	12:50
=== reid [n=reid@adsl-1-42-243.bix.bellsouth.net] has joined #ubuntu
Jack_Sparrow	J-_: Hope all goes well for you... time for some lunch...	12:50
J-_	okay. i'm just going to try this and if it doesn't work, a little gas and some spark will do a good job	12:50
braindead_moron	Jack_Sparrow, Any idea on how to diable it? I did an lspci but I didn't spot any daemons that sounded CPUish... cat /proc/acpi/processor/CPU0(or1)/throttling always sais T0 so it isn't scaling the way I did with my old centrino...	12:50
J-_	thanks again, have a good one	12:50
braindead_moron	err s/lspci/ps aux/	12:51
duckdown	I just chose "Move to wastebasket" for a picture by mistake, yet my god damn desktop doesn't even have a wastebasket. Furthermore, PLACES at the top of gnome doesn't have it either. Where is it?	12:51
=== Foris [n=relis@dynamic-216-211-62-229.tbaytel.net] has joined #ubuntu
ChocoCid	er	12:51
Seveas	duckdown, bottom right of the desktop (in the panel)	12:51
ChocoCid	your wastebasket is one one of the toolbars	12:51
=== A-L-P-H-A [i=abc@unaffiliated/a-l-p-h-a] has joined #ubuntu
Seveas	and please don't swear in here duckdown	12:51
ChocoCid	bottom right, assuming you haven't changed anything	12:51
braindead_moron	that is where mine is, bottom right corner	12:51
=== GStubbs43 [n=GStubbs4@pool-72-73-87-221.ptldme.east.verizon.net] has joined #ubuntu
decrypt	seveas can you repeat that?	12:51
Seveas	decrypt, ?	12:51
duckdown	Sorry Seveas	12:52
braindead_moron	duckdown, and you get more fly's with honey and all that :-)	12:52
Jack_Sparrow	braindead_moron: I just went to synaptic and did search for cpu scaling and got hits	12:52
=== mekanzoo [n=mekanzoo@222.124.80.120] has joined #ubuntu
duckdown	Hehehe :)	12:52
duckdown	It's not in the wastebasket.. how odd	12:52
duckdown	its filled with all kinds of older things, but not the stuff i just sent	12:53
Samus_Aran	Pseudonym: was afk, sorry. if you're still trying to do the conversion, you can use: convert osaka.gif -dispose none -coalesce osaka.png	12:53
decrypt	seveas what was youre last message?	12:53
Seveas	decrypt, this: <Seveas> decrypt, which part of "stop bothering me" is hard to understand?	12:53
=== RadiantFire [n=ryan@c-69-180-43-27.hsd1.ga.comcast.net] has joined #ubuntu
Samus_Aran	Pseudonym: that will turn it into one full picture for each frame, which mencoder can use for creating an MPEG-1 video	12:53
=== genbie [n=hathal@host86-143-114-116.range86-143.btcentralplus.com] has left #ubuntu ["Ex-Chat"]
=== zenwhen [n=zenwhen@74.131.98.27] has joined #ubuntu
dooglus	Seveas: "bothering" is by far the hardestto understand for a non-native speaker, wouldn't you think?	12:54
braindead_moron	Jack_Sparrow, it was powernowd	12:54
Pseudonym	Samus_Aran, Thanks so much! :3	12:54
dooglus	"stop" and "me" are both pretty simple	12:54
Jack_Sparrow	braindead_moron: Great...	12:54
Seveas	dooglus, rofl	12:54
Jack_Sparrow	braindead_moron: Hope that helps... now off to lunch...	12:54
=== RobNyc [n=imhotep@nylug/member/RobNyc] has joined #ubuntu
decrypt	Seveas why are you so mad at me? I did noting against you.	12:55
Pseudonym	Samus_Aran, you are a friggin rockstar..	12:55
=== Tomcat_ [n=tomcat@p54A1B5F3.dip0.t-ipconnect.de] has joined #ubuntu
=== mode/#ubuntu [+o Seveas] by ChanServ
=== decrypt [n=ronald@ip20-164-208-87.adsl2.versatel.nl] has left #ubuntu [requested]
=== mode/#ubuntu [+b !@ip20-164-208-87.adsl2.versatel.nl] by Seveas
=== mode/#ubuntu [-o Seveas] by ChanServ
=== philth [n=philth@d38-179-126.home1.cgocable.net] has joined #ubuntu
braindead_moron	Jack_Sparrow, Thanks, bon apetit	12:55
=== roostishaw [n=roostish@c-24-126-92-199.hsd1.ca.comcast.net] has joined #ubuntu
=== philth [n=philth@d38-179-126.home1.cgocable.net] has joined #ubuntu
Jack_Sparrow	braindead_moron: glad to help	12:56
teimu	what command do i want to run to create a compressed archive of a folder?	12:56
ChocoCid	heh, gotta love freenode	12:56
ChocoCid	you have no clue who's an op until after you piss them off	12:56
=== roostishaw [n=roostish@c-24-126-92-199.hsd1.ca.comcast.net] has left #ubuntu ["Leaving"]
=== philth_ [n=philth@d38-179-126.home1.cgocable.net] has joined #ubuntu
=== WildZeck [n=zeck@ax113-3-82-234-26-6.fbx.proxad.net] has joined #ubuntu
Seveas	dooglus, apparently the 'stop' was hardest, he needed some more convincing	12:56
Samus_Aran	Pseudonym: there's always a command or option to do just about anything	12:56
ChocoCid	teimu: just use Ark?	12:56
RadiantFire	teimu: tar -xcf file I think	12:56
Jack_Sparrow	teimu: tar	12:56
ChocoCid	although yeah, you could tar it	12:56
RadiantFire	or fileroller	12:56
Seveas	ChocoCid, /msg chanserv access #ubuntu list -- then you know them all	12:56
Renan_s2	!codecs	12:56
ubotu	For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats	12:56
=== gord [n=gord@81-178-236-68.dsl.pipex.com] has joined #ubuntu
ardchoille	duckdown: You can change a setting to make the trashcan appear on the desktop. CTRL+ALT+F2, type gconf-editor and click run. In the gconf-editor browse to apps/nautilus/desktop and check the trashcan_icon_visible box.	12:57
=== secleinteer [n=secleint@adsl-70-237-196-17.dsl.stlsmo.sbcglobal.net] has joined #ubuntu
=== _Hug[o] _ [n=eXistenZ@unaffiliated/eXistenZ] has joined #ubuntu
ChocoCid	...you know, it would have made sense had the list been put in the #ubuntu window, but why did it appear in #xchat ? :confused:	12:57
seeker__	I been fasting all night during my sleep, I am going to break my overnight fast, hence Breakfast :) brb	12:58
=== phargle [n=phargle@adsl-68-127-77-94.dsl.lsan03.pacbell.net] has joined #ubuntu
=== papa [n=papa@115.Red-81-44-181.dynamicIP.rima-tde.net] has joined #ubuntu
jrib	I seem to have forgotten the command that will make gnome/nautilus rescan the .desktop files, anyone remember?	12:58
=== bubba [n=bubba@rrcs-67-79-20-82.sw.biz.rr.com] has joined #ubuntu
papa	hola	12:58
Seveas	ChocoCid, that's a very annoying bug in xchat -- it is in a window of a channel where chanserv is also in	12:58
Seveas	!es	12:58
ubotu	Para Espaol por favor usen #ubuntu-es, #kubuntu-es o #edubuntu-es, alli obtendran mas ayuda.	12:58
ChocoCid	Seveas : that's kinda sucky :\	12:58
Seveas	ChocoCid, indeed.	12:59
=== Clujo [i=1000@dialup-4.249.141.4.Dial1.Washington2.Level3.net] has joined #ubuntu
Samus_Aran	Pseudonym: one sec, I'll give you the mencoder command to turn it into an MPEG-1 video	12:59
ku	!kfmbrowser	12:59
ubotu	I know nothing about kfmbrowser - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	12:59
RadiantFire	wow	12:59
ku	!kfmclient	12:59
ubotu	I know nothing about kfmclient - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	12:59
=== SonicvanaJr [n=sonic@unaffiliated/sonicvanajr] has joined #ubuntu
ku	doh	12:59
=== genbie [n=hathal@host86-143-114-116.range86-143.btcentralplus.com] has joined #ubuntu
Renan_s2	!xaralx	12:59
ubotu	I know nothing about xaralx - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	12:59
RadiantFire	ku, kfmbrowser has been gone since 2.0	12:59
Renan_s2	!info xaralx	12:59
Seveas	!fishing	12:59
ubotu	Package xaralx does not exist in dapper	12:59
ubotu	Please investigate with me only in /msg or in #ubuntu-bots Abusing the channel bots will only result in angry ops	12:59
RadiantFire	ku: I think you are looking for konqueror	01:00
ku	RadiantFire: ^^ i derno what it is... but i get an error in amaroK when I try to open a page in an external browser...	01:00
ChocoCid	now i need to find the xchat tab-completion option... se-tab results in an annoying message of "Se7h SeanTater secleinteer section31 sedeki seeker__ seraphim sergiol sethk Seveas " >_<	01:00
RadiantFire	ku: are you using kde or gnome?	01:00
ku	yeah, I'm on ubuntu using kubuntu apps...	01:00
ku	gnome	01:00
RadiantFire	ku: set the browser manually	01:00
ku	yeah, I was looking in the amaroK options but I couldn't find it	01:00
davey_	speaking of kde apps on gnome does anyone know of a good stock program for gnome? instead of qtstalker	01:01
RadiantFire	oh, i can't remember if the 1.9 has it	01:01
Pseudonym	Oh man, if you do Samus_Aran, I will personally help you destroy planet Zebes personally. :3	01:01
=== theraginasian [n=john@208-187-92-8.br1.hnv.mi.frontiernet.net] has joined #ubuntu
=== danl [n=danl@cpe-024-074-180-186.carolina.res.rr.com] has joined #ubuntu
Seveas	ChocoCid, /set completion_amount 1000	01:01
=== spades [n=spades@gate.lga2.us.voxel.net] has joined #ubuntu
braindead_moron	I'm a vim guy, under debain vim would "remember" commands from my last run (IE hitting the up arrow on a freshly opened vim instance would give me history from prev sessions), it doesn't seem to persist history between sessions in Ubuntu... Anyone know why?	01:02
RadiantFire	ku: i don't think non-kde people can set their browser in 1.3.9	01:02
RadiantFire	ku: try the 1.4 packages	01:02
ku	kk	01:02
Seveas	braindead_moron, you need to make it create a viminfo file (set that in your .vimrc)	01:02
RadiantFire	you can set it manually as x-www-browser	01:02
RadiantFire	which should be a link to your system set browser	01:02
ChocoCid	awesome, ty Seveas	01:02
ku	I'll give it a shot... thanks RadiantFire	01:02
Pseudonym	mencoder -ovc lavc -lavcopts vcodec=mpeg1video:vbitrate=1500 -mf type=png:fps=30 -nosound -of mpeg -o test1.mpg mf://\*.png << I tried this command Samus_Aran, but it is saying "error duplicate frame."	01:03
=== mainer [n=greg@bb-205-209-95-24.gwi.net] has joined #ubuntu
braindead_moron	Seveas, ah, .viminfo existed but was owned by root... doh	01:04
danl	How do i bind a command to key or key sequence in X11?	01:04
=== lhds [n=lhds@82.198.0.196.satgate.net] has joined #ubuntu
Seveas	danl, gnome/kde do that -- x11 not	01:04
=== pschulz01 [n=paul@202.174.42.5] has joined #ubuntu
=== roostishaw [n=roostish@c-24-126-92-199.hsd1.ca.comcast.net] has joined #ubuntu
Seveas	(and in gnome you need a very obscure way to set them)	01:04
lhds	i have this	01:04
lhds	root@lhds-desktop:/lib/modules# ls	01:05
lhds	2.6.15-23-386 2.6.15-26-386	01:05
=== _RvGaTe [n=RvGaTe@g178204.upc-g.chello.nl] has joined #ubuntu
lhds	uname -r	01:05
lhds	2.6.15-26-386	01:05
lhds	how to remove the old one?	01:05
danl	thanks Seveas, mind sending me in a direction for kde?	01:05
Seveas	danl, #kubuntu	01:05
jrib	danl: you can use xbindkeys too	01:05
davey_	lhds, you probably want to have both of them	01:05
Seveas	jrib, really?	01:05
=== emelka_ [n=monika@c65-135.icpnet.pl] has joined #ubuntu
Seveas	that's new to me -- reading manpage	01:06
=== emelka_ [n=monika@c65-135.icpnet.pl] has left #ubuntu ["Ex-Chat"]
micahcowan	!info xbindkeys	01:06
lhds	davey when i try to install video4lin it reads the old when i make i want it to read the new	01:06
ubotu	xbindkeys: Associate a combination of keys or mouse buttons with a shell command. In repository universe, is optional. Version 1.7.1-1 (dapper), package size 26 kB, installed size 152 kB	01:06
=== aimaz [n=stephen@i-83-67-17-205.freedom2surf.net] has joined #ubuntu
dooglus	what is the recommended way to edit a file as root using vim?	01:06
=== selinium [n=selinium@80-193-7-120.cable.ubr02.sout.blueyonder.co.uk] has joined #ubuntu
Renan_s2	dooglus, sudo vi <file name>	01:06
davey_	lhds, ohhh... ic	01:06
Seveas	dooglus, sudo -H vim	01:06
lhds	davey yes so any suggestions?	01:06
dooglus	Renan_s2: that causes .viminfo to be created by root if it doesn't already exist	01:07
=== danl [n=danl@cpe-024-074-180-186.carolina.res.rr.com] has left #ubuntu ["Konversation]
Seveas	dooglus, the -H prevents that	01:07
davey_	lhds, i don't know if it would work but maybe try using rmmod for that kernel, I'm not sure if you can do that	01:07
lhds	any exact syntax?	01:07
dooglus	Seveas: would aliasing 'sudo' to 'sudo -H' solve the whole gksudo vs. sudo mess?	01:07
RadiantFire	you can rmmod	01:07
=== genbie [n=hathal@host86-143-114-116.range86-143.btcentralplus.com] has left #ubuntu ["Ex-Chat"]
davey_	lhds, uhhh.. i forgot	01:07
RadiantFire	rmmod won't let you remove modules depended by other things	01:07
Seveas	dooglus, you can even set a preference in /etc/sudoers to force -H	01:07
=== dealahog [n=deal@ip70-186-80-244.ma.dl.cox.net] has joined #ubuntu
=== rellik [n=nat@12-215-113-119.client.mchsi.com] has joined #ubuntu
rellik	hello yet again	01:08
dooglus	Seveas: okay, but either way. currenty it seems that people don't know when to use sudo, sudo -H or gksudo, and there's no docs for it either	01:08
=== sapote-reloaded [n=sapote@host200.201-252-217.telecom.net.ar] has joined #ubuntu
=== Marsmensch [n=daniel@dslb-084-056-071-156.pools.arcor-ip.net] has joined #ubuntu
ChocoCid	what is the difference between those?	01:08
lhds	RadiantFire any exact syntax? root@lhds-desktop:/lib/modules# ls	01:08
lhds	2.6.15-23-386 2.6.15-26-386 uname -r 2.6.15-26-386	01:08
lhds	want to remove the old for installing video4linux	01:08
ChocoCid	*those?	01:08
RadiantFire	rmmod <modname>	01:09
Seveas	dooglus, man sudoers is a tough read ;)	01:09
=== minto [n=gfarr@74.132.208.217] has joined #ubuntu
Seveas	but it explains it all	01:09
dooglus	ChocoCid: it's to do with whether the command runs with the 1st user's envronment or the 2nd	01:09
rellik	just finished my first ubuntu install this afternoon and i'm having a display problem. I'm connected to my LCD via a VGA cable (crappy card in that box).	01:09
neutrinomass	Should bugs be filed for laptop keys that do not work correctly (this is a whitebox laptop) ?	01:09
ChocoCid	ah	01:09
dooglus	Seveas: it doesn't mention gksudo though, and the differences between them	01:09
lhds	that will be rmmod 2.6.15-23-386 ?	01:09
davey_	rellik, first step, what graphics card do you have	01:09
=== r0bby_ [n=wakawaka@cpe-24-161-52-23.hvc.res.rr.com] has joined #ubuntu
=== lancetw [n=lancetw@219-68-241-31.adsl.dynamic.giga.net.tw] has joined #ubuntu
rellik	the gui looks great, but everything is shifted to the right by about 200 pixels (ie: 200 pixels are displayed off the screen to the right and there is a big black bar on the left of the screen)	01:10
davey_	rellik, and some info on the problem	01:10
rellik	any ideas?	01:10
roostishaw	anyone, after running 'sudo apt-get build-dep [package name] ' I get "E: Build-dependencies for [package name] could not be satisfied." whats wrong?	01:10
davey_	rellik, hae you tried using your adjustments on your lcd monitor to move it over?	01:10
Samus_Aran	Pseudonym: still there ? I figured out the easiest way to do this, doesn't even need to be converted into a movie file	01:10
Samus_Aran	Pseudonym: and I learned more about how MPlayer works =p	01:10
Pseudonym	Awesome.	01:10
Bonez56	rellik: most LCD's have an auto-image-adjust feature	01:11
mwe	roostishaw: appearently it doesn't know how to supply the deps	01:11
Pseudonym	Please tell me, because I am getting duplicate frame error in mencoder...	01:11
roostishaw	mwe, and how would i fix that?	01:11
mwe	roostishaw: install them manually	01:11
=== roving_prole [n=Harper@c-71-199-16-110.hsd1.co.comcast.net] has joined #ubuntu
roostishaw	mwe, ...how?	01:11
rellik	yes, mine has an auto adjust, and its not adjusting	01:11
mwe	roostishaw: try your ./configure and look at the errors you get	01:11
rellik	i was thinking that maybe since it was an analog signal it wouldn't do the auto adjust	01:12
mwe	roostishaw: they will suggest what is missing	01:12
Jack_Sparrow	rellik: It probably also has a manual adjustment	01:12
=== _Hug[o] _ is now known as TFK`
jrib	Seveas: yeah, you can use xbindkeys along with xvkbd and/or xmacroplay to do some pretty interesting things	01:12
rellik	whiskey tango foxtrot...................	01:12
=== Kr0ntab [n=Kr0ntab@unaffiliated/Kr0ntab] has joined #Ubuntu
shawn_	im having an xgl/xompiz problem where the workspace turns grey like when you press "quit..." evrything locks up. but i can still switch to another workspace and it seems fine.	01:12
shawn_	any ideas ?	01:12
Jack_Sparrow	rellik: yea, got it..	01:13
Renan_s2	!amsn	01:13
ubotu	I know nothing about amsn - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	01:13
rellik	this screen is screwey. everytime i switch inputs it will do an auto adjust EXCEPT for when i switch to my ubuntu box	01:13
=== gir [n=gir@85-210-9-13.dsl.pipex.com] has joined #ubuntu
roostishaw	mwe, but it must be broken on my comp. it wont let me get build-deps for any package	01:13
=== NineTeen67Comet [n=justin@040M16.oasis.mediatti.net] has joined #ubuntu
=== root [n=root@adsl-70-241-87-210.dsl.hstntx.swbell.net] has joined #ubuntu
Jack_Sparrow	rellik: kvm switch?	01:13
rellik	don't know why i didn't think of the manual auto adjust	01:13
=== rellik is a space cadet today
mainer	*1	01:13
ChocoCid	haha	01:13
=== root is now known as whiter
=== mainer [n=greg@bb-205-209-95-24.gwi.net] has left #ubuntu ["WeeChat]
rellik	Jack_Sparrow: nope, just three inputs on the screen	01:13
Jack_Sparrow	ah	01:13
Samus_Aran	Pseudonym: first do this to create JPEGs for each frame:	01:14
A-L-P-H-A	I've got WPA working on my network. However, whenever I reboot, I have to "sudo ifdown ath0" "sudo ifup ath0" to get it to work. I have my /etc/network/interface file set correctly I think. http://pastebin.ca/104512 anyone know what may be causing this?	01:14
Jack_Sparrow	BAck to my lunch	01:14
Samus_Aran	Pseudonym: convert osaka.gif -dispose none -coalesce -quality 90 osaka.jpg	01:14
=== rellik goes back to messing with ubuntu
mwe	roostishaw: I see. it sounds odd	01:14
Samus_Aran	Pseudonym: next you can play those directly with MPlayer onto the root window	01:14
whiter	whats the executable called that does the gui configs for samba in gnome?	01:14
gir	hi guys, i've just overwritten a file on my ubuntu system using mv. i've tried debugfs, and there are "0 deleted inodes found." can anyone assist?	01:14
roostishaw	mwe, :( where should I start?	01:14
Samus_Aran	Pseudonym: I'm just trying to figure out how to control the speed	01:14
=== lhds [n=lhds@82.198.0.196.satgate.net] has left #ubuntu []
Samus_Aran	Pseudonym: currently it is doing 25FPS which is waaaaaaaaay too fast	01:14
Samus_Aran	Pseudonym: mplayer -vo x11 -rootwin -loop 0 -speed 0.01 -mf type=jpeg mf://*jpg	01:15
Samus_Aran	Pseudonym: the -speed is doing nothing for image files, it seems to only work for video files	01:15
mwe	roostishaw: well I would see if manually getting some dependencies would make it work better in the future.	01:15
void^	A-L-P-H-A: try inserting a pre-up sleep 2 statement	01:15
=== Rleyh [n=core@Mdb08.m.pppool.de] has joined #ubuntu
Pseudonym	Samus, thank you.	01:16
mwe	roostishaw: it's not been perfect for me either	01:16
Samus_Aran	Pseudonym: you can convert the JPEGs into an MPEG-1, to control the speed, though there should be a way to set the FPS for images	01:16
A-L-P-H-A	void^, where would that statement be inserted?	01:16
Bonez56	whiter: swat	01:16
whiter	swat?	01:16
Tremitos	hello	01:16
Pseudonym	Samus... might there be a way to output more images than neccessary with the convert command?	01:16
Rleyh	hi is there a way to install software from edgy in dapper like the debian 'apt-get install foo/testing' ?	01:16
void^	A-L-P-H-A: not sure if it matters, but right below iface ath0 .. is probably best	01:17
Bonez56	whiter: yes, that is a web based GUI config for samba	01:17
=== Dynamite [n=chatzill@62.117.43.230] has joined #ubuntu
Evil_Ed`	sup	01:17
whiter	no	01:17
whiter	thats not what i asked	01:17
Bonez56	whiter: sorry don't know then	01:17
whiter	i asked what was the executables name included in ubuntu that does the samba stuff	01:17
whiter	when you right click the folder and all that	01:17
Evil_Ed`	no	01:17
Tremitos	unsure	01:17
=== neutrinomass [n=pandis@ppp105-86.adsl.forthnet.gr] has joined #ubuntu
NineTeen67Comet	I have a question about accessing my server via nfs .. How do I control permissions? I mean the files are user:group 775 for the most part, but I'm finding I can not write to those directories from my other linux boxes (all Ubuntu). (I'm a user on the server too) ..	01:17
=== b1shop [n=b1shop@adsl-75-34-21-120.dsl.chcgil.sbcglobal.net] has joined #ubuntu
Pseudonym	Ha ha... mine is going about normal speed..	01:17
braindead_moron	whiter : in nautilus?	01:18
NineTeen67Comet	The directory I need rw access to is www-data:users .. 775 .. and I am a member of users .. shouldn't I be able to write to it?	01:18
whiter	braindead_moron yes	01:18
Samus_Aran	Pseudonym: that works fine with the JPEGs: mencoder mf://'*.jpg' -ovc lavc -of mpeg -lavcopts vcodec=mpeg1video -o osaka.mpg	01:18
Pseudonym	But it is switching back and forth between my old non-animated wallpaper and that everytime it loops...	01:18
gir	is anybody free? i've just overwritten a file on my ubuntu system using mv. I've tried debugfs, and there are "0 deleted inodes found." can anyone assist?	01:18
Bonez56	gir: sure. which file?	01:18
Rleyh	hi is there a way to install software from edgy in dapper like the debian 'apt-get install foo/testing' ?	01:18
gir	/usr/sbin/backup	01:19
braindead_moron	whiter: I right clicked a folder then typed in my password... Then when the dialog poopped up I did a ps aux \| grep -i share	01:19
gir	its a shell script i wrote	01:19
Bonez56	gir: sorry I don't have that file on my system	01:19
=== onur [n=Onur@88.229.43.152] has joined #ubuntu
gir	yeah i need to recover it	01:19
Bonez56	gir: oh	01:20
whiter	braindead_moron, and?	01:20
=== octan [n=ygyuygiu@213.161.182.225] has joined #ubuntu
Bonez56	gir: sorry not too sure	01:20
octan	howdy all	01:20
whiter	you could just let the window pop up and then do "xprop" and click on the window	01:20
gir	bonez: :( thanks anyways	01:20
Samus_Aran	Pseudonym: try using the option: -fixed-vo	01:20
braindead_moron	whiter: I see a process called shares-admin..	01:20
whiter	ooh	01:20
whiter	ok	01:20
neutrinomass	Rleyh: None that I'm aware of besides the ugly and unrecommended way of downloading the package manually and installing it ...	01:20
=== LogicalDash [n=chatzill@ip68-5-227-114.oc.oc.cox.net] has joined #ubuntu
Bonez56	gir: good luck	01:20
gir	i'm gonna need it	01:20
=== Homer [n=noplay@68-235-225-150.atlsfl.adelphia.net] has joined #ubuntu
=== dark_light [n=dark@unaffiliated/darklight] has joined #ubuntu
=== NineTeen67Comet [n=justin@040M16.oasis.mediatti.net] has left #ubuntu []
=== jdmpike [n=jordan@CPE-65-28-2-251.kc.res.rr.com] has joined #ubuntu
gir	anybody else got any ideas, about recovering overwritten files?	01:21
octan	can someone help me.... i just installed 3desktop, but i get this error when im trying to run it,, donno why i get it cos i have the nvidia drivers installed.. anyway,, i get this message. Xlib: extension "GLX" missing on display ":0.0".	01:21
jdmpike	how do you tunnel VNC through ssh?	01:21
=== Bonez56 is now known as Bonez
braindead_moron	octan: you don't have 3d acceleration...	01:21
octan	braindead_moron i have	01:22
=== TFK` is now known as eXistenZ
Samus_Aran	Pseudonym: mencoder mf://'*.jpg' -ovc lavc -of mpeg -lavcopts vcodec=mpeg1video -o osaka.mpg	01:22
=== Bonez is now known as Bonez56
jdmpike	I google "vnc ssh tunnel" and get a lot of howto's with putty and windows stuff	01:22
Samus_Aran	Pseudonym: that creates a working MPEG-1 file, then just play it back with the -speed setting	01:22
nosklo	octan, glxinfo \| grep render	01:22
braindead_moron	octan: then the glx module isn't loaded for some reason	01:22
dark_light	my /etc/rc.local seems to don't be executed by default.. it's the dapper default? how can i fix this?	01:22
LogicalDash	I'm trying to enable my Broadcom wireless card (with the bcm43xx driver), but every time I do so in System->Administration->Networking, it chugs for a while and says it's enabled, but then when I go back later, it's disabled. So I tried to do it through the command line--typed sudo ifconfig eth1 up-- and it said SIOCSIFFLAGS: No such file or directory --what's going on here?	01:22
octan	braindead_moron, im not using the nv driver, im using the nvidia driver, and i can play games without any problems	01:22
=== gir sets about rewritting his lost file sigh
Jack_Sparrow	octan: did you edit nv to nvidia?	01:22
octan	yes	01:22
=== blackline [n=blacklin@h136n4fls310o285.telia.com] has joined #ubuntu
octan	but im using the driver from nvidias site	01:23
Jack_Sparrow	octan: what does glxgears -printfps show	01:23
braindead_moron	octan, grep glx /etc/X11/xorg.conf	01:23
nosklo	gir, next time write it so it makes backup of itself too	01:23
Samus_Aran	Pseudonym: mp -vo x11 -rootwin -speed 0.05 -loop 0 osaka.mpg	01:23
mwe	jdmpike: http://pigtail.net/LRP/vnc/	01:23
Pseudonym	Samus... You are a goddess.	01:23
octan	Load "glx"	01:23
braindead_moron	hmm	01:23
nosklo	octan, glxinfo \| grep render	01:23
octan	Error: couldn't find RGB GLX visual	01:24
octan	:(	01:24
octan	odd	01:24
octan	howcome i can play games without prob?	01:24
octan	aa and et	01:24
Samus_Aran	Pseudonym: you may want to convert the images as 100 quality JPEGs rather than 90 quality (as I did), it may make the MPEG-1 file a bit clearer	01:24
=== Bonez56 [n=blake@bonez.dodj.net] has joined #ubuntu
Samus_Aran	Pseudonym: is your screen size 1280x960 ? as the command I gave you will not scale the video	01:25
Pseudonym	Ja...	01:25
=== Ruben [i=Ruben@201.240.154.204] has joined #ubuntu
A-L-P-H-A	void^, I'll try that.	01:25
Ruben	Hi friends	01:25
octan	s /usr/lib/xorg/modules/extensions/ \|grep glx	01:25
Ruben	i've a problem with my system :$	01:25
=== gir [n=gir@85-210-9-13.dsl.pipex.com] has left #ubuntu []
nosklo	Ruben, welcome	01:26
=== kameronk [n=kameronk@ip68-226-138-217.lf.br.cox.net] has joined #ubuntu
Samus_Aran	it would use CPU to scale it in software. the -vo xv (video_output xvideo_extension) would scale it in hardware, but then if you played any other video file it would go slow, as only one video may use the hardware scaling at once	01:26
Ruben	i erase accidental the file inittab and don't know how restoring it	01:26
=== _RvGaTe is now known as RvGaTe
Foris	Trash can	01:26
=== AxisGoat [n=None@124.197.24.71] has joined #ubuntu
LogicalDash	Hi everyone, I'm having a strange problem enabling my wireless card.	01:26
blackline	Before I had a program called Mogrify that I had much use of. That was before when I was running fedora. Now I really need Mogrify (or something alike). Anyone that know where I ca get it? Couldnt find it with apt.	01:26
Samus_Aran	Pseudonym: so it is better to use -vo x11 for the wallpaper, and -vo xv for everything else	01:26
=== myc [n=myc@201-221-199-136.bk11-dsl.surnet.cl] has joined #ubuntu
AxisGoat	I'm having a problem with my wireless card as well -_-	01:27
braindead_moron	AxisGoat, me three!	01:27
Samus_Aran	Pseudonym: if you want it to start when you log in, put the command into ~/.xinitrc or ~/.xsession	01:27
Samus_Aran	Pseudonym: just make sure you add an ampersand "&" after the command, so it runs in background	01:27
=== b1shop1 [n=b1shop@adsl-75-34-21-120.dsl.chcgil.sbcglobal.net] has joined #ubuntu
LogicalDash	It's a Broadcom card, I used to use ndiswrapper for it but Dapper seems to have an actual driver...	01:27
AxisGoat	I wanna install Ubuntu or possible Xubuntu on my laptop, but the thing is, everything works perfectly 'cept for the wireless	01:28
=== animal_ [n=animal@200.91.76.25] has left #ubuntu ["Ex-Chat"]
=== Chetic [n=chetic@gate13.lidnet.net] has joined #ubuntu
=== Intangir_ [i=Intangir@cpe-70-123-125-234.houston.res.rr.com] has joined #ubuntu
A-L-P-H-A	void^, sweet! works. thanks.	01:28
LogicalDash	only now, I try to enable it with sudo ifconfig eth1 up, and I get SIOCSIFFLAGS: No such file or directory	01:28
LogicalDash	what's it talking about?	01:28
=== al0cunit [i=al0cunit@87.250.108.12] has joined #ubuntu
cyphase	is ubuntu going to include an X configuration utility? something like this.. http://fedora.redhat.com/projects/config-tools/redhat-config-xfree86.html	01:28
nosklo	i got ubuntu to authenticate into an ActiveDirectory but users have no sound. How can I add users from AD to audio group on the fly when they log in? Or let everyone use audio??	01:29
blackline	No one that knows where I can get Mogrify for Ubuntu?	01:29
=== pablo--mvd [n=pablo--m@r200-40-112-92.static.adinet.com.uy] has joined #ubuntu
=== angel2 [n=ds9@APuteaux-106-1-2-85.w80-11.abo.wanadoo.fr] has joined #ubuntu
Renan_s2	brb. kernel update	01:29
AxisGoat	anyway, is there any sort of command I can run to get the name/brand of my wireless card?	01:29
nosklo	blackline, what is mogrify?	01:29
braindead_moron	what is funny as I made IT get this laptop with the intel 3945 rather then the dell wireless as I read that the 3945 worked without the ndis wrapper stuff... but mine doesn't :-(	01:29
LogicalDash	AxisGoat: lshw -C network	01:29
AxisGoat	I suck at figuring out hardware configurations for laptops :/	01:29
=== patrik [n=paedie@81-234-231-234-no41.tbcn.telia.com] has joined #ubuntu
braindead_moron	AxisGoat: try lscpi	01:30
blackline	nosklo its a program i used for changing resolution and quality on pictures in terminal	01:30
nosklo	AxisGoat, lshw gives you full hardware specs	01:30
AxisGoat	m'kay	01:30
AxisGoat	I'm a linux noob so bear with me -_-	01:30
pablo--mvd	hi! i need to acces x from a windows machine	01:30
pablo--mvd	im using ubuntu 606	01:30
LogicalDash	AxisGoat: doing it as lshw -C network shows just your network hardware	01:30
=== crogue5 [n=crogue5@ip70-161-80-244.hr.hr.cox.net] has joined #ubuntu
pablo--mvd	which soft do you suggest?	01:30
=== navilon [n=navilon@ppp-70-250-117-65.dsl.hstntx.swbell.net] has joined #ubuntu
Samus_Aran	Pseudonym: mplayer -msglevel all=0 -vo x11 -rootwin -fixed-vo -speed 0.05 -loop 0 osaka.mpg &	01:30
nosklo	pablo--mvd, vnc	01:30
AxisGoat	m'kay, it's a broadcom as well	01:30
Samus_Aran	Pseudonym: that could be added to your X startup script	01:31
LogicalDash	Does anyone here know what SIOCSIFFLAGS means?	01:31
AxisGoat	BCM4318	01:31
=== lukasz23 [n=lukasz23@gw-ww.telsten.com] has joined #ubuntu
pablo--mvd	nosklo: ok ill try it.. but inst it a bitn insecuere?	01:31
Samus_Aran	Pseudonym: you may want to make the frames loop back to the first one, e.g. play frames 1 2 3 4 5 4 3 2 1	01:31
Samus_Aran	Pseudonym: so it doesn't skip	01:31
nosklo	pablo--mvd, yes	01:31
seeker__	noaXess_kubuntu: hey	01:31
nosklo	pablo--mvd, there is no security, but you can try tunnelling it over an ssh (putty) connection	01:31
Pseudonym	is there a secret to this, Samus_Aran?	01:31
=== croppa [i=user66@135.27.233.220.exetel.com.au] has joined #ubuntu
pablo--mvd	nosklo: how can i do that?	01:32
braindead_moron	so does anyone here have an intel 3945 wireless carding working with 6.06?	01:32
=== help-the-n00b [n=will1992@c-68-84-253-132.hsd1.fl.comcast.net] has joined #Ubuntu
help-the-n00b	Is there a way to use AIM throught the terminal?	01:32
davey_	can anyone help me get 3d working on my ati radion xpres 200 graphics card in amd64 linux	01:32
help-the-n00b	Through.*	01:32
Samus_Aran	Pseudonym: simplest way I can think of is to link the jpeg files before making the MPEG-1 file (so there are copies of the files in reverse order)	01:32
davey_	help-the-n00b, interesting idea	01:32
nosklo	pablo--mvd, you should go by steps, try first getting vnc connection up, then you try to tunnel it over ssh	01:32
=== Hikaru79 [n=adrian@d57-3-74.home.cgocable.net] has joined #ubuntu
davey_	I can't even get glx gears to work	01:32
AxisGoat	don't see why there should be no x200 support in the 64 bit distro	01:33
nosklo	pablo--mvd, there is plenty documentation resources on the net	01:33
help-the-n00b	davey_, Is it possible?	01:33
AxisGoat	it picks up my x200 fine on the x386 one	01:33
davey_	AxisGoat, you would be surpized	01:33
pablo--mvd	nosklo: oki ill try thanks	01:33
mjr	nosklo, you might want to give them audio group membership on login via the pam_group PAM module. see http://www.kernel.org/pub/linux/libs/pam/Linux-PAM-html/pam-6.html	01:33
davey_	AxisGoat, not as much hardware works correclty	01:33
davey_	axisGoat, did you have to do anything to make it work	01:33
nosklo	mjr, right!	01:33
=== I [n=jno@adsl-d209.87-197-114.telecom.sk] has joined #ubuntu
nosklo	mjr, that is what i am trying	01:34
AxisGoat	nah, it goes immediately, but this' off a live CD	01:34
I	hello ppl	01:34
AxisGoat	since I'm still trying to get my wireless working before I install it	01:34
braindead_moron	help-the-n00b, centericq seems to do IM from the cli via ncurses	01:34
davey_	help-the-n00b, you just have to find a program that does it, they have irc in the terimnal	01:34
=== Blissex [n=Blissex@82-69-39-138.dsl.in-addr.zen.co.uk] has joined #Ubuntu
I	im havin a big difficulties with mounting a hdd :( plz can u help me?	01:34
=== fogos [n=marco@200.94.142.9] has joined #ubuntu
nosklo	mjr, i have added "auth required pam_group.so" on /etc/pam.d/gdm	01:34
davey_	I, what file system is it	01:34
braindead_moron	help-the-n00b, I haven't tried it, I just googled aim cli linux	01:34
=== Foris slaps nosklo around a bit with a large trout
help-the-n00b	How do I do IRC in the erminal?	01:35
Jack_Sparrow	change your nick so we can talk to you	01:35
help-the-n00b	Terminal.*	01:35
Jack_Sparrow	i	01:35
Samus_Aran	Pseudonym: C=10; for F in $(\ls -1 jpg; \ls -1 jpg\|tac); do C=$((C+1)); echo ln "$F" "New_$C.jpg"; done	01:35
mjr	nosklo, I don't know the spesifics personally, sorry; just thought to point you in the right direction	01:35
nosklo	mjr, and "gdm; ; ; Al0000-2400; audio, video, cdrom, floppy" in /etc/security/group.conf	01:35
mike-e	anyone good with configuring sound cards?	01:35
nosklo	mjr, oh ok	01:35
nosklo	i am missing something?	01:35
nosklo	am I missing something?	01:35
help-the-n00b	mike-e, Nope, not me.	01:35
=== julian_ [n=julian@chello213047156017.3.graz.surfer.at] has joined #ubuntu
sarra_	Running Ubuntu install on my desktop, and I'm getting Buffer I/O errors on hdb	01:36
julian_	hi	01:36
eyequeue	help-the-n00b, one good console irc client is irssi	01:36
Samus_Aran	Pseudonym: mencoder mf://'New*.jpg' -ovc lavc -of mpeg -lavcopts vcodec=mpeg1video -o osaka.mpg	01:36
nosklo	mjr, thanks anyway	01:36
davey_	If anyone knows how to get 3d in amd64 with radionxpress 200 talk to me about some time, I can't seem to figure it out	01:36
=== Krhis [n=Krhis@cblcpe-79-205.suite224.net] has joined #ubuntu
julian_	where is the water plugin for compiz packed?	01:36
help-the-n00b	How do I do IRC through the termianl?	01:36
eyequeue	!info irssi	01:36
ubotu	irssi: terminal based IRC client. In repository main, is optional. Version 0.8.10-1ubuntu1 (dapper), package size 989 kB, installed size 2764 kB	01:36
help-the-n00b	Terminal.*	01:36
=== scud [n=scud@68.62.196.210] has joined #ubuntu
eyequeue	irssi: nothing appropriate.	01:36
Samus_Aran	Pseudonym: oops, apparently they only want .jpg, you will need to delete the old JPEGs, and then run it with mf://.jpg	01:36
Foris	IRC is like online notepad	01:36
eyequeue	irssi-text: nothing appropriate.	01:36
=== yoshiznit123 [n=sciyoshi@adsl-75-3-36-116.dsl.chcgil.sbcglobal.net] has joined #ubuntu
sarra_	Crap	01:36
julian_	why there oly less plugins install with compiz	01:37
sarra_	how do I terminate boot?	01:37
=== I [n=jno@adsl-d209.87-197-114.telecom.sk] has joined #ubuntu
braindead_moron	help-the-n00b, did you look at centericq?	01:37
sarra_	I need to pull that harddrive from the sstem	01:37
help-the-n00b	How do I run Irssi?	01:37
Ruben	friends help me, i need to restore the INITTAB file	01:37
Samus_Aran	Pseudonym: oh no, I had an "echo" in there, it didn't do the ln commands at all, it was just a test. I always test first, and forgot to remove the echo	01:37
I	hello im back... i got kicked... was it because some moderator did it?	01:37
Samus_Aran	Pseudonym: C=10; for F in $(\ls -1 jpg; \ls -1 jpg\|tac); do C=$((C+1)); ln "$F" "New_$C.jpg"; done	01:37
Jack_Sparrow	If you want help on mounting that drive it would help if you changed your nick to something easier to bring up	01:37
mike-e	i've installed ubuntu on this relatively old machine, this ISA sound card isn't working. The icon on gnome-panel for sound has the red circle in it (like it does when you mute it) and when I click on it it says "No volume control GStreamer plugins and/or devices found"	01:37
=== p0seidon [n=poseidon@CPE-60-231-46-97.qld.bigpond.net.au] has joined #ubuntu
eyequeue	help-the-n00b, sudo apt-get install irssi	01:37
I	how to do it?	01:37
Jack_Sparrow	slash nick	01:38
AxisGoat	say, will Konquerer run okay on Ubuntu	01:38
eyequeue	help-the-n00b, then just run "irsii" in console	01:38
I	test	01:38
Jack_Sparrow	slash /nick newnick	01:38
help-the-n00b	eyequeue, What! I thought it was terminal based?	01:38
help-the-n00b	Oh. Ok.	01:38
=== AxisGoat dislikes firefox, so will try to get either that or opera
octan	libglx.so	01:38
octan	libglx.so.1.0.8762	01:38
octan	braindead_moron, any ideas?	01:38
octan	Jack_Sparrow do you got any ideas?	01:38
=== I is now known as Jno_Bno
=== al0cunit [i=al0cunit@87.250.108.12] has left #ubuntu []
Jack_Sparrow	AxisGoat: hUGE PROBLEM WITH THE NEW OPERA	01:38
Jack_Sparrow	AxisGoat: sORRY	01:38
AxisGoat	what's that?	01:38
eyequeue	help-the-n00b, apt-get is a console command too	01:38
octan	hey dudes. why do i get this error? Xlib: extension "GLX" missing on display ":0.0". when i have the libglx installed?	01:38
Jno_Bno	finally my nick is borned >\|	01:39
Jack_Sparrow	AxisGoat: Arrrrrr really sorry	01:39
help-the-n00b	Lol. I know.	01:39
=== sapote-III-[el_r [n=sapote@host120.201-252-193.telecom.net.ar] has joined #ubuntu
help-the-n00b	Nevermind.	01:39
LogicalDash	Does anyone know what the error "SIOCSIFFLAGS: No such file or directory" when it comes in response to trying to bring up an interface with ifconfig?	01:39
AxisGoat	np, so what's the problem w/ the latest opera?	01:39
yoshiznit123	octan, do you have nvidia?	01:39
Foris	Why did they make it so when you hold ALT and type fxfire it opens a test editor and makes an ascii cow??	01:39
octan	can any one help me?	01:39
octan	i need to sort out this error	01:39
nosklo	i need help adding all gdm users to audio group through pam_group, anyone knows how to do that?	01:39
Jno_Bno	so... how to mount that drive?	01:39
yoshiznit123	octan, do you have an nvidia card?	01:39
void^	LogicalDash: usually the interface doesn't exist	01:39
eyequeue	Foris, "they"?	01:39
octan	yoshiznit123 indeed i do	01:39
Samus_Aran	Pseudonym: then do the mencoder command I said: mencoder mf://'New*.jpg' -ovc lavc -of mpeg -lavcopts vcodec=mpeg1video -o osaka.mpg	01:39
nosklo	octan, i have installed the repository nvidia drivers, not the web page ones	01:39
eyequeue	Foris, "they" made an easter egg	01:39
nosklo	octan, it works fine here	01:39
octan	yoshiznit123 yes	01:39
Jack_Sparrow	Jno_Bno: get the diskmopunter script if they are ntfs or fat	01:40
Jno_Bno	huh... this chat is fast...	01:40
yoshiznit123	octan, and the problem is with what, compiz?	01:40
Jack_Sparrow	800+ people	01:40
Jno_Bno	whats that?	01:40
=== Hexidigital_ [n=Hexidigi@24.238.58.57.res-cmts.wbh.ptd.net] has joined #ubuntu
octan	nosklo thouse drivers are shitty,, its mesa based glx driver which suxz big time	01:40
=== kyncani [n=kyncani@bro29-1-82-245-180-190.fbx.proxad.net] has joined #ubuntu
sarra_	Looks like Ubuntu install locked up	01:40
Jack_Sparrow	Jno_Bno: what format are those drives you want to mount	01:40
Pseudonym	Thanks again Samus...	01:40
Jno_Bno	im quite a noob, so it maybe a lil painful helping me :)	01:40
nosklo	octan, they are not	01:40
=== peeledOak [i=peeledOa@bzq-88-155-171-175.red.bezeqint.net] has joined #ubuntu
Jack_Sparrow	Jno_Bno: thick skin	01:40
Jno_Bno	i think its ntfs...	01:40
nosklo	octan, nvidia drivers are in the repository	01:40
nosklo	octan, there is no need to download the nvidia webpage drivers	01:41
octan	yoshiznit123 im trying to get 3desktop to work,,but i get error	01:41
yoshiznit123	octan, when do you get the error message?	01:41
Jack_Sparrow	Jno_Bno: http://www.ubuntulinux.nl/files/diskmounter	01:41
sarra_	nosklo: do the nvidia drivers in the repository support SLI?	01:41
octan	Xlib: extension "GLX" missing on display ":0.0".	01:41
octan	nosklo dude,, mesa suxz	01:41
nosklo	octan, there is no MESA dude!	01:41
octan	its mesa based	01:41
=== mode/#ubuntu [+o Seveas] by ChanServ
=== mode/#ubuntu [-b cbell@circe.ine!#ubuntu-o@*] by Seveas
nosklo	octan, its not, it is the same as the page	01:41
nosklo	octan, only finely packaged for ubuntu	01:42
octan	when did they change that?	01:42
=== peeledOak [i=peeledOa@bzq-88-155-171-175.red.bezeqint.net] has left #ubuntu ["Leaving"]
=== Chu [n=swebster@cpe-66-74-195-151.san.res.rr.com] has joined #ubuntu
=== mode/#ubuntu [-b !@unaffiliated/warlord384] by Seveas
Jack_Sparrow	Jno_Bno: Do you intend to try and write to the ntfs drive.. Still not 100% safe..	01:42
shawn_	how can i tell if i have the latest version of xgl/compiz?	01:42
nosklo	sarra_, i dont know, my card doesnt have sli, but I guess so, since they are the same of the nvidia page, only nicely packaged for ubuntu	01:42
yoshiznit123	octan, nvidia moves some of the libraries to /usr/lib/nvidia. i had some problems with those earlier, try using LD_PRELOAD	01:42
Jno_Bno	yup... i wanted to backup my files there...	01:42
=== Armadillio [n=coleman@66.101.23.86] has joined #ubuntu
Jack_Sparrow	Jno_Bno: Not advised	01:43
Jno_Bno	so it might happend even if ill mount it right that ill lost my data?	01:43
nosklo	octan, I dont know when the change ocurred	01:43
Jack_Sparrow	Jno_Bno: yep, possibly lose everything	01:43
=== EinZteiN [n=einztein@a213-22-54-22.cpe.netcabo.pt] has joined #ubuntu
nosklo	octan, but you install the nvidia-glx package from the repository, and linux-restricted-modules	01:43
Jno_Bno	hm... thats bad... seems that i no longer need to mount it :D	01:43
nosklo	octan, and you get to use "nvidia" instead of "nv"	01:43
Jack_Sparrow	Jno_Bno: see the warning in that script about writing to ntfs	01:43
Jno_Bno	is it safe to mount FAT drive?	01:43
nosklo	octan, without any package from nvidia web page	01:43
octan	nosklo, if you look at the deps. for the nvidia driver from the repo,, you'll see that it depends on some mesa shit	01:43
davey_	Jno_Bno, yes	01:43
Jack_Sparrow	Jno_Bno: Yes fat 32 is fine and what I use here for sharing	01:44
Jno_Bno	thx :)	01:44
octan	yoshiznit123, what you mean?	01:44
octan	try using LD_PRELOAD?	01:44
davey_	mwe, can I ask you personaly a few questions	01:44
nosklo	octan, it does not, I am looking at it right now	01:44
Jack_Sparrow	Jno_Bno: Fast answers here eh?	01:44
AxisGoat	hrms	01:44
yoshiznit123	like this: LD_PRELOAD=/usr/lib/nvidia/libwhatever.so 3ddesktop	01:44
octan	nosklo, so am i	01:44
AxisGoat	how am I going to restart the computer when ubuntu is only running in RAM -_-	01:44
=== jn [n=jn@c-24-5-99-252.hsd1.ca.comcast.net] has joined #ubuntu
Blissex	Jack_Sparrow: there is a good 'ext2'/'ext3' file system driver for MS Windows. It is much better than using FAT32	01:45
Jno_Bno	hehe... yup...	01:45
octan	nosklo, libglu1mesa	01:45
yoshiznit123	or LD_LIBRARY_PATH=/usr/lib/nvidia 3ddesktop	01:45
jn	hey does anyone have a working repo for ntfs-3g	01:45
nosklo	octan, libglu1-mesa OR libglu1	01:45
sarra_	Okay, that's gone	01:45
davey_	alright anyone, can someone just talk to me about installing the x64 drivers for linux ati 200 xpress	01:45
Jack_Sparrow	Blissex: I prefer fat 32 than a driver in windows	01:45
sarra_	harddrive was so hot it could melt steel almost	01:45
help-the-n00b	How do I connect to this that I server with Irssi?	01:45
nosklo	octan, that means you can install only libglu1 and NOT mesa	01:45
davey_	I just want to chat with someone about it for a little bit because I don't want to msess up	01:45
Jack_Sparrow	Blissex: Why do you say it is better?	01:45
Blissex	sarra_: that is very bad news...	01:45
help-the-n00b	How do I connect to this server with Irssi?*	01:45
octan	yoshiznit123 ok i'll try	01:45
nosklo	octan, libglu1-mesa \| libglu1	01:45
=== Armadillio [n=coleman@66.101.23.86] has joined #ubuntu
eyequeue	help-the-n00b, /help server	01:46
nosklo	octan, that \| means "OR"	01:46
help-the-n00b	Ok.	01:46
sarra_	Blissex: Yes, I'm glad it didn't heat-damage my case or other harddrives	01:46
=== tony_ [n=tony@80-235-139-8.cable.ubr11.newt.blueyonder.co.uk] has joined #ubuntu
Blissex	Jack_Sparrow: a lot faster, big file support...	01:46
eyequeue	help-the-n00b, also /help connect, for irssi	01:46
davey_	so anyone that knows about graphics want to chat with me about it?	01:46
Samus_Aran	g'day everyone	01:46
=== Samus_Aran [n=ILL@about/linux/supportwhirlwind/SamusAran] has left #Ubuntu ["onwards]
=== gort [n=jgbiggs@cpe-24-175-10-187.houston.res.rr.com] has joined #ubuntu
Jno_Bno	im off to bed... thanks again for helping me... wish ya nice day :)	01:46
=== Foris [n=relis@dynamic-216-211-62-229.tbaytel.net] has left #ubuntu []
jn	i could really use a repo for ntfs3g i want to read/write my ntfs drive	01:46
Jack_Sparrow	Blissex: I dont have files over 2 gig and fat32 is plenty fast for me..	01:46
=== Eclipse_GSX [n=fuck@lrotter.resnet.willamette.edu] has joined #ubuntu
mike-e	so ubuntu doesn't support ISA anymore	01:47
mike-e	?	01:47
eyequeue	!fuse	01:47
ubotu	Though it's still very unsafe, you can read about Ubuntu NTFS writing here: https://wiki.ubuntu.com/Lkraider/NtfsFuse	01:47
eyequeue	jn, ^^^	01:47
sarra_	Okay, I need some help installing	01:47
Pseudonym	Thanks again Samus!	01:47
=== Pseudonym [n=weeaboo@ip70-190-210-97.ph.ph.cox.net] has left #ubuntu ["Leaving"]
sarra_	It's freezing on load from the live cd	01:47
=== EpP [n=evan@c-67-182-211-240.hsd1.ut.comcast.net] has joined #ubuntu
davey_	sarra_, what part	01:47
Armadillio	Are there any programs Ubuntu comes with you guys recommend I get rid of? Because my comp slows down after a while of being on and I want it to stop...	01:47
=== EpP [n=evan@c-67-182-211-240.hsd1.ut.comcast.net] has joined #ubuntu
=== jonh_wendell [n=wendell@wifi-40.vcnet.com.br] has joined #ubuntu
=== Darkhack_ [n=Darkhack@64-126-93-142-dhcp-kc.everestkc.net] has joined #ubuntu
jonh_wendell	Hi people!	01:48
sarra_	After all of the drivers and kernel is loaded, it plays a tone, and freezes with a white _ on the top left of the screen	01:48
Kr0ntab	Armadillio, did you install much after the base install?	01:48
EpP	hey	01:48
help-the-n00b	How do I get Mozilla Thunderbird?	01:48
=== b1shop1 [n=b1shop@adsl-75-34-21-120.dsl.chcgil.sbcglobal.net] has joined #ubuntu
=== SaPote [n=sapote@200.68.214.35] has joined #ubuntu
help-the-n00b	sudo apt-get install thunderbird?	01:49
sarra_	help-the-n00b: Use the add-remove programs	01:49
Armadillio	Not really, just some of the w32codecs and stuff...	01:49
nosklo	help-the-n00b, sudo aptitude install mozilla-thunderbird	01:49
eyequeue	help-the-n00b, sudo apt-get install thunderbird	01:49
=== Plymouth [n=tony@80-235-139-8.cable.ubr11.newt.blueyonder.co.uk] has joined #ubuntu
=== connyosis [n=conny@h12n2fls31o879.telia.com] has joined #ubuntu
Armadillio	You know the restricted wiki, that stuff.	01:49
Kr0ntab	yeah but tats not like running to slow things down...	01:49
eyequeue	!info thunderbird	01:49
ubotu	Package thunderbird does not exist in dapper	01:49
=== khaije1 [n=n1x0r@person1.constellation.com] has joined #ubuntu
=== duckdown [i=airfoil@blackprojects.labs.nasa-gov.com] has joined #ubuntu
Kr0ntab	how much memory on yer system?	01:49
help-the-n00b	sarra_, I'm using Ubuntu Linux.	01:49
eyequeue	!info mozilla-thunderbird	01:49
ubotu	mozilla-thunderbird: Mozilla Thunderbird standalone mail client. In repository main, is optional. Version 1.5.0.5-0ubuntu0.6.06 (dapper), package size 10037 kB, installed size 28632 kB	01:49
EpP	How can i get my airport card to get WPA/Tkip?	01:49
sarra_	help-the-n00b: So am I	01:49
=== Hexidigital_ [n=Hexidigi@24.238.58.57.res-cmts.wbh.ptd.net] has joined #ubuntu
Darkhack_	I want to setup Linux for my father who is on a now unsupported Windows 98 system. Will Ubuntu run alright on a 466mhz 192mb RAM machine for basic tasks like Firefox and OpenOffice? Also it needs to be easy to use. So far everything has failed in some way or another. Even Xubuntu failed because it is too buggy when trying to place icons on the desktop.	01:49
jn	hm ntfs-3g is what im looking for, ive used it and had no probelms id rather not experiment with this other method although ntfs-3g uses fuse as well	01:49
help-the-n00b	What?	01:50
Jack_Sparrow	Armadillio: Could it be an overheating problem?	01:50
Armadillio	I got about 80 gigs worth, but my ram is like 128mb or something, an older computer...	01:50
eyequeue	help-the-n00b, sudo apt-get install mozilla-thunderbird (they shoretened firefoxes name, but not thunderbird's?	01:50
=== FusionXN1 [n=scott@86.112.192.129] has joined #ubuntu
sarra_	Under the aplications menu, there's "add remove"	01:50
Armadillio	No my room is cold as hell...	01:50
=== cal [n=cal@dorm13031.dorm-net.louisville.edu] has joined #ubuntu
Armadillio	Well hell isn't really cold but I got this cooling fan in here so no way it could be too warm.	01:50
=== tony_ [n=tony@82-171-144-205.dsl.ip.tiscali.nl] has joined #ubuntu
Kr0ntab	Armadillio, if you have under 128.. you think you have like 64 megs?	01:50
Jack_Sparrow	Darkhack_: that is a pretty marginal system for Ubuntu	01:50
davey_	anyone know about the ati propretary drivers how to get thouse to work in amd64	01:50
=== cal [n=cal@dorm13031.dorm-net.louisville.edu] has left #ubuntu ["Leaving"]
FusionXN1	HI all	01:50
Armadillio	Well, I checked the specs and it IS 128...	01:51
help-the-n00b	I have 10GB max in my HD!	01:51
help-the-n00b	JK	01:51
EpP	How can i get my airport card to get WPA/Tkip?	01:51
help-the-n00b	!	01:51
ubotu	I know nothing about ! - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	01:51
jn	have you used the fuse method that you linked me to?	01:51
sarra_	!ati	01:51
ubotu	To install the Ati/NVidia drivers for your video card, see https://wiki.ubuntu.com/BinaryDriverHowto	01:51
FusionXN1	I finally got xlink kai working on ubuntu	01:51
Jack_Sparrow	!broadcomm	01:51
eyequeue	jn, me? i don't use ntfs or anything from them	01:51
ubotu	I know nothing about broadcomm - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	01:51
Kr0ntab	Armadillio, thats fine... not a lot... but thats ok. you running gnome or kde	01:51
help-the-n00b	!broadcom	01:51
Jack_Sparrow	!bcm43	01:51
ubotu	Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs	01:51
Armadillio	gnome	01:51
ubotu	I know nothing about bcm43 - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	01:51
Darkhack_	I'm downloading Ubuntu now via bittorrent. I hope it works out. So far EVERY distro has had a problem with it. I really hope the Ubuntu team focuses on usability more than other distributions.	01:52
Jack_Sparrow	thanks noob	01:52
Hexidigital	!bcm43xx-fwcutter	01:52
ubotu	I know nothing about bcm43xx-fwcutter - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	01:52
Seveas	!fishing	01:52
Hexidigital	!bcm43xx	01:52
help-the-n00b	Ah. One 'm' required.	01:52
ubotu	Please investigate with me only in /msg or in #ubuntu-bots Abusing the channel bots will only result in angry ops	01:52
ubotu	Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs	01:52
Kr0ntab	Armadillio, you can adjust some of the "animations" settings...	01:52
Kr0ntab	also... what kind of graphics card are you running?	01:52
FusionXN1	Anyone help me - Why doesnt one of my harddrives show under computer?	01:52
=== michael [n=michael@60-234-217-130.bitstream.orcon.net.nz] has joined #ubuntu
sarra_	FusionXN1: You need to mount the drive	01:52
help-the-n00b	Mountit!	01:53
FusionXN1	sarra done it	01:53
Armadillio	Animation settings? What about them... what are they even?	01:53
=== michael is now known as exparrot
nalioth	help-the-n00b: please register your nick and /msg ubotu with your questions	01:53
Jack_Sparrow	Darkhack_: If you up the ram you will have much better luck.. slow but stable	01:53
sarra_	FusionXN1: Have you looked in /media?	01:53
FusionXN1	i can get to it via media/sdc1	01:53
Kr0ntab	in gconf... you can turn off a couple of animation settings.. like minimization effects... etc	01:53
help-the-n00b	How do I change my nick?	01:53
help-the-n00b	I did register.	01:53
FusionXN1	but it wont show on computer or in the menu and i want it to :(	01:53
=== exparrot [n=michael@60-234-217-130.bitstream.orcon.net.nz] has left #ubuntu ["Leaving"]
=== ex-parrot [n=michaelf@60-234-217-130.bitstream.orcon.net.nz] has joined #ubuntu
Armadillio	How do I get to gconf?	01:53
FusionXN1	Anyway to get it to show?	01:53
Seveas	help-the-n00b, try ##help for general IRC help	01:53
eyequeue	!register >vhelp-the-n00b	01:53
Seveas	Armadillio, <alt><f2>	01:54
Plymouth	Can anyone tell me if a firewall is automatically installed with ubuntu 5.04, and how I go about investigating it please?	01:54
Seveas	and enter gconf-editor	01:54
FusionXN1	change ya nick is /nick BLA	01:54
=== lhds [n=lhds@82.198.0.196.satgate.net] has joined #ubuntu
Armadillio	OK, I'll give it a try. Thanks.	01:54
=== Armadillio [n=coleman@66.101.23.86] has left #ubuntu []
=== gyaresu [n=gyaresu@124.243.140.29] has joined #ubuntu
ex-parrot	can anyone give me the .config for the standard Ubuntu i386 kernel?	01:54
Kr0ntab	might help some... but also.. if yer graphics card has hardware acceleration capabilities you'll want to make sure you're using the acclerated drivers to help things out. if no card like this... no worrries then.	01:54
Jack_Sparrow	Plymouth: firewall is part of linux iptables and you dont use a firewall you use a firwall manager like firestarter only if needed	01:54
Seveas	ex-parrot, it's in /boot on your system	01:54
nosklo	I need help to configure pam, the pam_group module, to insert users in audio group automatically on login. Does somebody has any experience? I have tried everything I know and nothing till now.	01:54
=== roostishaw [n=roostish@c-24-126-92-199.hsd1.mn.comcast.net] has joined #ubuntu
davey_	can anyone talk to me about the ati installer ?	01:55
EpP	does anyone use WPA with a airport on a mac	01:55
Seveas	EpP, airport or airport extreme?	01:55
FusionXN1	Sarra anyway i can do it?	01:55
EpP	Seveas, Airport	01:55
ex-parrot	derr, thanks Seveas	01:55
help-the-n00b	!register > help-the-n00b	01:55
Jack_Sparrow	EpP: read up on the broadcom stuff as we linked earlier	01:55
=== xvlun [n=jan@dslb-088-072-216-219.pools.arcor-ip.net] has joined #ubuntu
EpP	kk	01:55
help-the-n00b	Not useful.	01:55
Hexidigital	!usethis is Query me in a private message to avoid disturbing the channel. To access me, type /MSG Ubotu {query}.	01:55
Seveas	Jack_Sparrow, EpP:no, normal airpart isn't broadcom	01:56
FusionXN1	help-the-noob what you need help with	01:56
Plymouth	Jack_Sparrow: Cheers, I've seen mention of this 'firestarter', but I've not seen anything on how to use it!	01:56
Jack_Sparrow	Plymouth: you really dont need it	01:56
EpP	Seveas, do u need to use WPA_Supplicant	01:56
FusionXN1	Jack_ you know your stuff anyway to make my 3rd hdd show in computer?	01:56
Jack_Sparrow	Seveas: I thought airport was using the broadcom chipset	01:56
ex-parrot	Seveas, files like config-2.6.15.25-386 etc?	01:56
help-the-n00b	Mount it.	01:56
Seveas	EpP, yes, but network-manager makes using that easy	01:56
lhds	euh root@lhds-desktop:/home/lhds/v4l-dvb/v4l# make creating symbolic links... make: *** /lib/modules/2.6.15-23-386/build: No such file or directory. Stop. root@lhds-desktop:/lib/modules# ls 2.6.15-26-386 what's wrong? wy cant it read from the folder 2.6.15-26-386 ???	01:56
Seveas	ex-parrot, yes	01:56
=== roostishaw [n=roostish@c-24-126-92-199.hsd1.mn.comcast.net] has left #ubuntu ["Leaving"]
Seveas	Jack_Sparrow, only the airport extreme	01:57
ex-parrot	thanks once again Seveas, wish me luck in compiling a Xen kernel with SATA support ;)	01:57
Jack_Sparrow	FusionXN1: Is that your external drive usb something?	01:57
=== birula [n=birula@201.78.77.69] has joined #ubuntu
Plymouth	Jack_Sparrow: Eh? Everyone's squeeling about safety and security on the 'net	01:57
EpP	Seveas, how do i get that?	01:57
kameronk	lhds, are you using sudo?	01:57
Seveas	ex-parrot, good luck	01:57
FusionXN1	jack SATA ext3	01:57
lhds	you mean sudo make ?	01:57
lhds	i am logged in as root	01:57
Jack_Sparrow	Plymouth: which is why Mac and Linux are safe, just Windows has the problem	01:57
Seveas	EpP, a wired connection would be useful for now, then you can run apt-get install network-manager-gnome	01:57
leagris	hello	01:57
kameronk	o ok, never mind lhds, maybe try not being root	01:57
EpP	i am on wired	01:57
EpP	Seveas,	01:57
lhds	how to go out of root?	01:58
Seveas	then run that command ;)	01:58
=== aaron_k [n=aaron_k@vpn-wh.rz-zw.fh-kl.de] has joined #ubuntu
EpP	kk	01:58
eyequeue	lhds, exit	01:58
=== DrBashir2 [n=drbashir@vermeer.xs4all.nl] has joined #ubuntu
lhds	ok wait guys	01:58
Plymouth	We're safer than Wankows, for sure, but not totally safe!	01:58
leagris	big troubles with yesterday update. All OpenOffice dependencies screwed and it brock all the installation because of mixed OO 2.0.2 and incomplete 2.0.3. Using official mirrors.	01:58
=== DarkMageZ [n=DarkMage@ppp230-230.lns3.syd7.internode.on.net] has joined #ubuntu
=== aestetix [n=aestetix@foster.stonedcoder.org] has joined #ubuntu
Seveas	Plymouth, please don't use inappropriate language in here	01:58
=== aaron_k [n=aaron_k@vpn-wh.rz-zw.fh-kl.de] has left #ubuntu ["Verlassend"]
=== kismet [n=kismet@151.52.118.162] has joined #ubuntu
Jack_Sparrow	Seveas: AirPort Express is a Broadcom BCM4712KFB wireless networking chipset.	01:58
lhds	same error here	01:59
aestetix	So... I just apt-get installed glade, wondering why it didn't show up in the path	01:59
Seveas	Jack_Sparrow, correct -- and normal airport (ie: not an airport express) is not a broadcom chip (prism I thought)	01:59
aestetix	ie when I type "glade" or "whereis glade" it doesn't find anything.	01:59
lhds	root@lhds-desktop:/home/lhds/v4l-dvb/v4l# make creating symbolic links... make: *** /lib/modules/2.6.15-23-386/build: No such file or directory. Stop. root@lhds-desktop:/lib/modules# ls 2.6.15-26-386 what's wrong? wy cant it read from the folder 2.6.15-26-386 ??? under normal user it does not find the dir	01:59
Plymouth	Sorry, but when it comes to mention of things from Redmond...	01:59
aestetix	Even though apt-get says it's been installed	01:59
EpP	Seveas, k i installed it and i tried to run NetworkManger	01:59
=== nate_ [n=nate@70-97-208-61.dsl2.elk.ca.frontiernet.net] has joined #ubuntu
Jack_Sparrow	Seveas: good to know... I need to ask what type of Airport in the future	02:00
kismet	Hi All! Where can I information related to mojo mapping, I mean how can I know which mapping is active when I select a particular packaging model?	02:00
Seveas	EpP, you need to logout + login for it to work	02:00
EpP	kk	02:00
nate_	hello i need some help with compiling my dapper kernel after patching it with phc patch	02:00
Seveas	!kernel > nate_	02:00
FusionXN1	Jack... theres no flags on my 3rd harddrive but on my 2nd which shows it has "ba" listed does that matter	02:00
ex-parrot	!kernel	02:00
ubotu	kernel is the core of the Ubuntu Operating System (named 'Linux'). You shouldn't have to compile one, but if you're convinced you do, see https://wiki.ubuntu.com/KernelCustomBuild	02:00
kismet	Sorry wrong channel...	02:00
=== kismet [n=kismet@151.52.118.162] has left #ubuntu ["Leaving"]
nate_	I have to recompile because i need special functionality not built into dapper kernel	02:01
aestetix	Is there some command I need to issue after an apt-get to make sure the software installed properly?	02:01
ex-parrot	anyone here ever used Xen on Ubuntu?	02:01
=== ewert [i=ewert@84-217-67-171.tn.glocalnet.net] has joined #ubuntu
lhds	tell me i updated the kernel to v 26 from 23 with synaptic and restarted than i went to lib/modules than i did an sudo apt-get remove --purge linux-image-2.6.15-23-386 is there something wrong?	02:01
nate_	I am adding the phc (for undervolting) patch and have compiled cleanly...but am having trouble with ipw2200 aftwards	02:01
nosklo	I need help to configure pam, the pam_group module, to insert users in audio group automatically on login. Does somebody has any experience? I have tried everything I know and nothing till now.	02:02
Seveas	ex-parrot, (if you don't mind a useless reply) edgy will sort-of support Xen properly	02:02
=== GTX [n=GTX@pdpc/supporter/monthlybronze/GTX] has joined #ubuntu
=== GoldenEagle68 [n=Ken@71-32-154-130.chyn.qwest.net] has joined #ubuntu
ex-parrot	Seveas, that's not useless, it's good to know - but not when I have to have this server ready by tomorrow	02:02
Hexidigital	Seveas:: will edgy support Compiz/XGL (preinstalled?) :)	02:02
Jack_Sparrow	FusionXN1: I really dont know what to do with that issue	02:02
lhds	help?	02:03
=== bigdaddyjosh [n=chatzill@c-68-40-203-73.hsd1.mi.comcast.net] has joined #ubuntu
=== stack_push [n=stack_pu@peterson.dim.com] has joined #ubuntu
=== adu [n=adu@shareeva.vzcdsl-236.toad.net] has joined #ubuntu
=== imbrandon_ [n=brandon@ubuntu/member/pdpc.active.imbrandon] has joined #ubuntu
FusionXN1	oh	02:03
lhds	i am deeply drowning	02:03
Seveas	Hexidigital, no	02:03
bigdaddyjosh	hello	02:03
=== Hexidigital needs food... be back later
=== roostishaw [n=roostish@c-24-126-92-199.hsd1.mn.comcast.net] has joined #ubuntu
Kr0ntab	aestetix, usually running the application... you can also run "aptitude seach package_name". if it has an "i" at the beginning... should be installed fine..	02:03
GoldenEagle68	Can anyone help me with an Intel 8/16 LAN adapter that is not being recognized during a dapper drake install?	02:04
bigdaddyjosh	just want to say, I have done 2 ubuntu installations now, one on this machine (tho I am using my windows boot now) and another on a gateway solo 1450, and the 1450 was soooo much easier to get up and going	02:04
ex-parrot	Seveas, my plan is to copy the .config file from the stock Ubuntu kernel and import it in to the Xen build thingy, so it builds the Xen kernel with the right drivers.... sound sane to you?	02:04
Seveas	ex-parrot, not completely	02:04
=== jwhayman [n=jwhayman@199.172.232.84] has joined #ubuntu
DrBashir2	What other mail clients are out there comparable to Office Outlook?	02:04
Jack_Sparrow	evolution	02:04
GoldenEagle68	thunderbird	02:04
ex-parrot	how likely is it to work?	02:05
Seveas	but I have 0 experience with xen	02:05
Seveas	ex-parrot, no clue	02:05
=== mode/#ubuntu [-o Seveas] by ChanServ
=== bjotn [n=bjorn@h85n2fls31o294.telia.com] has joined #ubuntu
ex-parrot	the Xen documentation talks about importing .config files from other kernels...	02:05
kameronk	what is the best media player for ubuntu?	02:05
ex-parrot	heh ok thanks anyway Seveas	02:05
DrBashir2	got evolution, but it wont let me specify how many day's to leave messages on the server	02:05
Kr0ntab	DrBashir2, kmail, thunderbird, evolution, sylpheed... and many many more	02:05
=== MatthewV [n=MatthewV@CPE-144-137-231-113.wa.bigpond.net.au] has joined #ubuntu
=== navilon [n=navilon@adsl-69-153-132-28.dsl.hstntx.swbell.net] has joined #ubuntu
=== SapoDriLo [n=SapoDriL@201.152.214.6] has joined #ubuntu
=== aestetix [n=aestetix@foster.stonedcoder.org] has left #ubuntu []
GoldenEagle68	So, can anyone help with my LAN adapter problem?	02:05
=== SapoDriLo [n=SapoDriL@201.152.214.6] has left #ubuntu ["Leaving"]
ex-parrot	kameronk, Totem is quite nice... failing that MPlayer and VLC have always worked quite well	02:06
=== oezguer [n=oezguer@e179244197.adsl.alicedsl.de] has joined #ubuntu
jwhayman	hi there, im having a problem with my monitor's resolution, its currently set at 640x40 :( and ive tried using dpkg-reconfigure x-server and also from the gui applications in gnome but nothing seems to work, is there anything else i can try? (my monitor is a CRT with a max resolution of 1024x768, thanks	02:06
=== rellim [n=max@ip70-179-171-74.dl.dl.cox.net] has joined #ubuntu
=== Mozo [n=Mozo_@201009037121.user.veloxzone.com.br] has joined #ubuntu
=== hussam [n=hussam@194.146.153.38] has joined #ubuntu
kameronk	ok, thank you ex-parrot, i had forgotten about that one... i don't like using KDE-ish apps under gnome	02:06
oezguer	hi everybody.........	02:06
Kr0ntab	DrBashir2, many people have much success with Tunderbird.... made by the folks that put out firefox.. mozilla and the like.	02:06
Kr0ntab	thunderbird even.	02:06
rellim	hello oezguer	02:07
oezguer	can i use ares at ubuntu????????	02:07
=== Mozo [n=Mozo_@201009037121.user.veloxzone.com.br] has left #ubuntu ["The]
=== zipper_ [n=zipper@port19.ds1-hj.adsl.cybercity.dk] has joined #ubuntu
oezguer	hi rellim thanx	02:07
rellim	oezguer: use gtk-gnutella instead	02:07
oezguer	what is it?`	02:07
zipper_	Anyone know where i can find a list of linux supported pci wireless network cards?	02:07
rellim	oezguer: same thing ares is ... just a linux version (basically)	02:07
zipper_	!wireless	02:07
ubotu	Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs	02:07
oezguer	rellim: i need a program (ares or so ) to dowwnload films	02:07
DrBashir2	Kr0ntab: well, I'll give it a try, but I'm biased against it cos I dont like FF, I'm an Opera fan :)	02:07
Kr0ntab	hedhe	02:08
Kr0ntab	operas latest is great....	02:08
zipper_	nevermind, found it	02:08
Kr0ntab	thunderbird is great. you should like it.	02:08
Kr0ntab	many out there though...	02:08
oezguer	rellim: whats the name os webseite	02:08
Kr0ntab	I really like sylpheed back in the day because it's also very very snappy...	02:08
=== TCK0 [n=MAKAVELI@d142-179-40-228.bchsia.telus.net] has joined #ubuntu
TCK0	does ubuntu have a ports system to install software similar to emerge in gentoo ?	02:08
oezguer	rellim: how can i install it? from where?	02:09
=== timalot [n=tim@202-78-148-47.cable.telstraclear.net] has joined #ubuntu
reid	When I run xorgcfg, I get a message on my monitor that says "input signal out of range" how do I fix this\	02:09
Jack_Sparrow	DrBashir Huge holes in the new opera, very unsecure	02:09
=== dhumphreys [n=dhumphre@68-114-165-87.dhcp.kgpt.tn.charter.com] has joined #ubuntu
GoldenEagle68	will SOMEONE please help me with my LAN adapter situation, it's an Intel 8/16, ubuntu wont recognize it	02:09
Jack_Sparrow	TCK0: synaptic, apt-get etc ?	02:09
rellim	oezguer: syntapic or apt-get	02:09
GoldenEagle68	but worked fine before my reinstall	02:09
=== medfly [n=som1@87.69.99.197] has left #ubuntu ["Leaving"]
=== dhumphreys [n=dhumphre@68-114-165-87.dhcp.kgpt.tn.charter.com] has left #ubuntu ["Leaving"]
AxisGoat	all operas or just the ubuntu version?	02:09
oezguer	anem of program?	02:09
oezguer	name	02:10
AxisGoat	haven't noticed any sort of bugs in the current one on xp	02:10
rellim	oezguer: gtk-gnutella	02:10
timalot	whats the package in dapper that gives you the "new login in nested window" menu item?	02:10
oezguer	thanxxxxxxxxxxxxxxxxxxx rellim god bless you	02:10
=== ThunderStruck [n=ThunderS@ubuntu/member/gnomefreak] has joined #ubuntu
Jack_Sparrow	AxisGoat: I just saw the article yesterday..	02:10
rellim	oezguer: no problem, anytime :)	02:10
=== TCK0 [n=MAKAVELI@d142-179-40-228.bchsia.telus.net] has left #ubuntu []
DrBashir2	hmm, cant get Thunderbird with apt-get?	02:11
=== bytefu [n=bytefu@cpe-66-68-125-239.austin.res.rr.com] has joined #ubuntu
oezguer	rellim: where u from? me from germany but ;) im turk	02:11
rellim	oezguer: Texas	02:11
oezguer	cowboy:rellim ;)	02:11
nosklo	I need help to configure pam, the pam_group module, to insert users in audio group automatically on login. Does somebody has any experience? I have tried everything I know and nothing till now.	02:11
rellim	oezguer: hardly :P	02:11
Jack_Sparrow	DrBashir No, but it is an easy install	02:11
fistandantilus	whenever i exit enemy territory (which i play in 800x600), my desktop is set to that and it doesn't change back to 1280x1024, how can i fix this?	02:11
eyequeue	DrBashir, sudo apt-get install mozilla-thunderbird	02:11
oezguer	nice,, i gotta fly to los angeles next month	02:11
oezguer	:))	02:11
GoldenEagle68	will SOMEONE please help me with my LAN adapter situation, it's an Intel 8/16, ubuntu wont recognize it. It worked before I reinstalled, though.	02:11
DrBashir2	Jack_Sparrow: ah ok	02:12
eyequeue	Jack_Sparrow, it's in ubuntu	02:12
Jack_Sparrow	It is...	02:12
rellim	oezguer: oh wow, long flight	02:12
eyequeue	!info mozilla-thunderbird	02:12
ubotu	mozilla-thunderbird: Mozilla Thunderbird standalone mail client. In repository main, is optional. Version 1.5.0.5-0ubuntu0.6.06 (dapper), package size 10037 kB, installed size 28632 kB	02:12
=== Eclipse_GSX is away, Im out until Wednesday...See you guys then (pager: On/logging: On) (Gone: 6days 22hrs 9mins 34secs)
=== Eclipse_GSX is now known as Eclipse_GSX[A]
oezguer	rellim: have a good night,,, yeah first south africa then usa.... i love long flight	02:12
Jack_Sparrow	eyequeue: thanks... I should have thought of that	02:12
oezguer	byee everyone bye rellim	02:13
rellim	oezguer: bye vye	02:13
rellim	bye*	02:13
DrBashir2	maybe tun apt-get mozilla-thunderbird instead of just thunderbird?	02:13
AxisGoat	hrmses	02:13
DrBashir2	run* even	02:13
AxisGoat	secuna doesn't seem to have any new vulnerabilities listed	02:13
=== spacefinn [n=naprinci@pool-71-120-192-240.rlghnc.dsl-w.verizon.net] has joined #ubuntu
GoldenEagle68	will SOMEONE please help me with my LAN adapter situation, it's an Intel 8/16, ubuntu wont recognize it. It worked before I reinstalled, though.	02:13
DrBashir2	ah there we go	02:13
=== LogicalDash [n=chatzill@ip68-5-227-114.oc.oc.cox.net] has joined #ubuntu
rellim	GoldenEagle68: then ubuntu can recognize it :) .... lemme go look something up and i will see if i can help	02:14
LogicalDash	My wireless card can ping the router but not the DNS server. What's wrong?	02:14
GoldenEagle68	relim: thank you.	02:14
=== regeya [n=shane@dialup-4.159.59.67.Dial1.Chicago1.Level3.net] has joined #ubuntu
GoldenEagle68	is it configured to use the correct dns server?	02:15
Asc	Logical: do you have a second connection?	02:15
=== Mozo [n=Mozo_@201009037121.user.veloxzone.com.br] has joined #ubuntu
Mozo	Hi!	02:15
=== sphivo [n=sphivo@24-181-194-150.dhcp.hckr.nc.charter.com] has joined #ubuntu
GoldenEagle68	hello.	02:15
LogicalDash	Asc: I unplugged my ethernet to do this test.	02:15
Mozo	I can't modify my ip_forward value to "1" =/	02:16
=== Brocolis [n=allan@c9114bc9.rjo.virtua.com.br] has joined #ubuntu
rellim	GoldenEagle68: do you have an exact model number of the network adapter?	02:16
Mozo	bash: /proc/sys/net/ipv4/ip_forward: Permission denied	02:16
=== Mytho-xp [n=jesus@201.152.41.41] has joined #ubuntu
=== Brocolis [n=allan@c9114bc9.rjo.virtua.com.br] has left #ubuntu ["Ex-Chat"]
=== Renan_s2 [n=Renan@201.47.220.201] has joined #Ubuntu
Mytho-xp	:P	02:16
Mytho-xp	ke ondaz :d	02:16
Mozo	i have tried with sudo and nothing	02:16
GoldenEagle68	relim: not sure where I can find it, lemme take it out again	02:16
=== eternaljoy [n=truth@210.56.65.137] has joined #ubuntu
Mytho-xp	8-) donde esta el mr Beckham	02:16
ardchoille	!es > Mytho-xp	02:16
eternaljoy	mykilx: how are you?	02:17
=== davey_ [n=chatzill@c-67-182-44-11.hsd1.ca.comcast.net] has joined #ubuntu
Asc	LogicalDash: People have having problems with DNS lately. Not sure why, but one of them seemed to be related to be related to using ethernet and ppp connections at the same time	02:17
davey_	ati proprietary drivers messed up my setup I cant get xorg to work	02:17
davey_	someone please help me	02:17
davey_	i'm on amd64 and i cant get it back up	02:17
rellim	GoldenEagle68: ok	02:17
LogicalDash	Asc: I'll try disabling the ethernet proper, then	02:17
davey_	I just did the default options in the ati installer	02:17
LogicalDash	going offline	02:17
=== mode/#ubuntu [+o Seveas] by ChanServ
=== mode/#ubuntu [-b !@c-24-218-106-50.hsd1.ma.comcast.net!#ubuntu-ops] by Seveas
=== mode/#ubuntu [-o Seveas] by ChanServ
AxisGoat	can you reinstall or have you got important files there still?	02:18
=== AxisGoat is a nublet so probably won't be able to help past that suggestion
Asc	yargh	02:18
rellim	davey_: i don't know much about the ati drivers, but are you sure you got the amd64 version of the drivers?	02:18
Jack_Sparrow	yarrrrrrrrrrrrr is the correct spelling	02:18
davey_	axisGoat, was that sugestion for me? yes I have tons of imporatn files	02:18
Asc	somebody tell me what the proper command to ignore nicserv messages is?	02:18
davey_	yes I got the x86_64 version	02:18
davey_	from their site	02:18
=== QuagMire [n=CHICKEN@CPE0010b5e5fded-CM000f9f7c3c6c.cpe.net.cable.rogers.com] has joined #ubuntu
Jack_Sparrow	DaveyJ: then boot a live cd	02:18
davey_	Jack_Sparrow, thast not going to change my xorg config	02:19
Mytho-xp	8-) jhey beckher	02:19
Mytho-xp	becker :P	02:19
GoldenEagle68	relim: e139761	02:19
rellim	GoldenEagle68: ok, just a minute	02:19
=== QuagMire is now known as drupsta
=== tdgqqb [n=lowwwww@p54B6B88D.dip0.t-ipconnect.de] has joined #ubuntu
Jack_Sparrow	DaveyJ: no but it will let you make the backup you dont have	02:19
ardchoille	Mozo: Did you try gksudo gedit /proc/sys/net/ipv4/ip_forward ?	02:19
davey_	I think the installed might have backed up my old file	02:19
Mozo	ardchoille, yes	02:19
=== Hawk\|afk [n=Hawk@p549CA58A.dip0.t-ipconnect.de] has joined #ubuntu
davey_	can someone who is an expert please be allerted soon about this I really need to get this fixed	02:19
davey_	I followed all the instructions it just didn't work	02:20
ex-parrot	davey_, all you need to do is edit /etc/X11/xorg.conf and change the driver	02:20
Mozo	ardchoille, and i need include "echo 1 >/proc/sys/net/ipv4/ip_forward" in my init	02:20
Jack_Sparrow	DaveyJ: boot live and post your corg to pastbin so we can better help you	02:20
ex-parrot	or if you're not keen on that, execute sudo dpkg-reconfigure xserver-xorg and change it in the menu interface	02:20
rellim	GoldenEagle68: i see that model number listed as a pentium3 motherboard	02:20
davey_	ex-parrot, can you tell me what to put in it?	02:20
ardchoille	Mozo: What does ls -lha /proc/sys/net/ipv4/ip_forward return?	02:20
Mozo	for setting it on rebooting	02:20
=== LogicalDash [n=chatzill@ip68-5-227-114.oc.oc.cox.net] has joined #ubuntu
Jack_Sparrow	DaveyJ: boot live and post your xorg to pastbin so we can better help you	02:20
LogicalDash	aHA! it worked.	02:20
ex-parrot	davey_, you could switch it to "ati" from "fglrx" to get you back up and running	02:20
GoldenEagle68	relim: where might the model number be then	02:21
Mozo	ardchoille, -rwxr-xr-x 1 root root 0 2006-07-28 21:21 /proc/sys/net/ipv4/ip_forward	02:21
rellim	GoldenEagle68: don't know to be sure ... is it an on board ethernet controller?	02:21
GoldenEagle68	relim: no, pci	02:21
LogicalDash	I'm using ndiswrapper for this, and not the bcm43xx driver. I had some very strange problems with that driver.	02:21
=== kdingo [n=dingo@host86-130-130-199.range86-130.btcentralplus.com] has joined #ubuntu
GoldenEagle68	relim: http://www.etech4sale.com/network/partinfo-id-1460.html	02:21
ardchoille	Mozo: Is your user able to sudo?	02:22
davey_	ex-parrot, so I should naviagate in console to /ect/X11/xorg.conf and type nano xorg.config and then when i see the file look for flxglx and put ati their? I really am lost	02:22
Mozo	ardchoille, yes	02:22
rellim	GoldenEagle68: well i'll be damned .... ok, just a moment :)	02:22
Mozo	ramon@itech:/var/local$ sudo echo 1 >/proc/sys/net/ipv4/ip_forward	02:22
Mozo	bash: /proc/sys/net/ipv4/ip_forward: Permission denied	02:22
Mozo	=/	02:22
=== ryanakca [n=ryan@unaffiliated/ryanakca] has joined #ubuntu
ardchoille	Mozo: Try this, gksudo gedit and then drag that file from nautilus into the gedit window	02:22
=== synth7 [i=synth@69-164-39-165.atlaga.adelphia.net] has joined #ubuntu
=== der0b [n=mds@c-24-218-106-50.hsd1.ma.comcast.net] has joined #ubuntu
Renan_s2	Mozo, sudo sh -c "echo 1 >/proc/sys/net/ipv4/ip_forward"	02:22
iamchris	What do you all think of mandriva as a user friendly version of linux?	02:22
=== Jettis [n=h0h0@a88-113-56-216.elisa-laajakaista.fi] has joined #ubuntu
Seveas	Mozo echo 1 \| sudo tee /proc/sys/net/ipv4/ip_forward	02:23
davey_	ex-parrot, seriously I have no idea where hat is in the file, so should I just boot it up and look around?	02:23
Seveas	iamchris, this is #ubuntu, mandriva support/questions in #mandriva please	02:23
Mozo	hmmm	02:23
Mozo	Seveas, GREAT!!!!	02:23
iamchris	I really just want a less biased opinion, not any technical help	02:24
=== Sameer-s [n=Sameersz@CPE0004e29d484f-CM000f9f7b3bba.cpe.net.cable.rogers.com] has joined #ubuntu
Seveas	Mozo, to make that permanent, you'll have to edit /etc/sysctl.conf	02:24
Mozo	ardchoille, thank you :)	02:24
ex-parrot	yeah davey_ that's about it	02:24
Seveas	iamchris, people in here will be biased towards ubuntu	02:24
Mozo	Seveas, hmmmm	02:24
=== carolyn [n=carolyn@ip24-252-193-235.mc.at.cox.net] has joined #ubuntu
ex-parrot	except use sudo nano davey_ so it'll let you modify	02:24
ardchoille	Mozo: You're welcome :) But I rather like Seveas's way better :)	02:25
carolyn	good evening	02:25
iamchris	I tried it, but I kept getting the Fatal IO error when I tried to load the live cd	02:25
FusionXN1	How do i rename a harddrive	02:25
carolyn	Is there a JRE that is packaged for ubuntu?	02:25
Mozo	:D	02:25
davey_	ex-parrot, I'm going to try that right now i'll be back	02:25
=== lukasz23 [n=lukasz23@gw-ww.telsten.com] has joined #ubuntu
Seveas	!java > carolyn	02:25
Renan_s2	!java > carolyn	02:25
=== tich [n=bradley@MTL-ppp-153387.qc.sympatico.ca] has joined #ubuntu
drupsta	hi guys	02:25
carolyn	thanks	02:25
Seveas	hi drupsta	02:25
Evil_Ed`	yo	02:26
Tremitos	yo	02:26
carolyn	I assume multiverse is available to kubuntu users seamlessly?	02:26
drupsta	do you guys have any idea where to begin with translating Ubuntu?	02:26
Seveas	carolyn, indeed	02:26
=== richard [n=richard@h88211156086.dsl.speedlinq.nl] has joined #ubuntu
Jack_Sparrow	DrBashir The problem is in all versions of Opera 9	02:27
Seveas	drupsta, join the channel of your local language	02:27
=== kdingo [n=dingo@host86-130-130-199.range86-130.btcentralplus.com] has joined #ubuntu
=== zerostarhx [n=zerostar@pool-71-108-78-106.lsanca.dsl-w.verizon.net] has joined #ubuntu
rellim	GoldenEagle68: you still there?	02:28
=== CyDrive [n=owner@ool-18ba06b7.dyn.optonline.net] has joined #ubuntu
=== carthik_ [n=carthik@user-142h0oa.cable.mindspring.com] has joined #ubuntu
=== hussam is now known as hussam_
CyDrive	Can anyone reccomend me an awsome C++ compiler with IDE?	02:28
=== Naosv [n=naosv@cpc3-cani1-0-0-cust1020.renf.cable.ntl.com] has joined #ubuntu
drupsta	Seveas how do join the local language channel	02:28
Tremitos	I'll find out	02:28
zerostarhx	I added the repositories for WINE through synaptec and installed the packages, but now how do I launch win?	02:29
rellim	CyDrive: use g++ and use Eclipse with the c++ plugin for the ide ... makes development pretty	02:29
Seveas	drupsta, what's your local language?	02:29
Renan_s2	CyDrive, I like KDevelop	02:29
=== david__ [n=david@72.24.118.46] has joined #ubuntu
drupsta	dzongkha	02:29
ex-parrot	zerostarhx, run winecfg first	02:29
Jack_Sparrow	zero winecfg	02:29
=== shimmmy_ [i=lamotte@sawce.cs.umn.edu] has joined #ubuntu
=== jonh_wendell [n=wendell@wifi-40.vcnet.com.br] has joined #ubuntu
ex-parrot	then just launch your windows apps with wine	02:29
=== TyeDye [n=jeff@72.4.52.99] has joined #ubuntu
zerostarhx	how do I do thatp "{	02:29
ex-parrot	either from the open-with menu or from the command line	02:29
zerostarhx	errr how do I do that :P	02:29
=== eternaljoy [n=truth@210.56.65.137] has joined #ubuntu
ex-parrot	open a command line zerostarhx , type in "winecfg" minus quotes and hit enter	02:29
=== move [n=move@pool-72-77-247-220.tampfl.fios.verizon.net] has joined #ubuntu
drupsta	seveas it is dzongkha	02:30
zerostarhx	ok I'm going to try it real quick then get back to you guys thankyou.	02:30
=== david__ [n=david@72.24.118.46] has joined #ubuntu
=== SlyGuy [n=cduhard@S0106000fb55ad233.wp.shawcable.net] has joined #ubuntu
drupsta	i have seen that not much people are translating in my local language	02:31
Seveas	hmm -- I don't know of any team for that language yet (I don't even know the language :)) -- you may have to start the team. You should join the ubuntu-translators mailing list and ask for guidance there	02:31
=== richard [n=richard@h88211156086.dsl.speedlinq.nl] has left #ubuntu ["Konversation]
GoldenEagle68	relim: yes	02:31
eternaljoy	Seveas: how can I change my screen resolution in Dapper please?	02:31
timalot	anyone know how to change the window manager in gnome-session 2.12+ ?	02:31
drupsta	the Team is already there	02:31
=== Renan_s2 [n=Renan@201.47.220.201] has joined #Ubuntu
micahcowan	Seveas: just looked it up in wikiped: national language of Kingdom of Bhutan. Dunno that that helps, but...	02:32
Seveas	!resolution > eternaljoy	02:32
ardchoille	timalot: I wrote a tutorial on that, hold on.. I'll get yu a URL	02:32
=== lukasz23 [n=lukasz23@gw-ww.telsten.com] has joined #ubuntu
rellim	GoldenEagle68: try "sudo modprobe eepro"	02:32
micahcowan	Seveas: I don't suppose there's a Tibetan newsgroup? That'd at least be closer than English...	02:32
SlyGuy	is there any software that i can use to test if NVIDIA GL drivers are working?	02:32
=== robertj [n=robertj@66-188-77-153.dhcp.athn.ga.charter.com] has joined #ubuntu
Seveas	drupsta, well, since you know that you should probably also be able to find the team contact :D	02:32
ardchoille	timalot: https://help.ubuntu.com/community/ReplaceMetacityWithOpenbox	02:32
micahcowan	s/newsgroup/channel	02:32
Renan_s2	SlyGuy, glxgears	02:32
SlyGuy	i installed XGL and i am getting a GLX rendering error	02:32
GoldenEagle68	relim: believe i've tried it but will try again	02:32
timalot	ardchoille, thanx ill have alook	02:33
SlyGuy	Renan: where wold tha be at?	02:33
SlyGuy	that	02:33
Renan_s2	SlyGuy, open a terminal and type glxgears	02:33
SlyGuy	aight	02:33
SlyGuy	i just happen to have one open :)	02:33
drupsta	Seveas, actually i was looking for what i need to be translater	02:33
Renan_s2	you should see some high FPS if GLX is work OK	02:33
ardchoille	timalot: Which window manager you going to use?	02:33
=== zcat[1] [n=zcat@60-234-226-80.bitstream.orcon.net.nz] has joined #ubuntu
Seveas	drupsta, you need to be a member of the team, only the team lead can make you a member	02:34
SlyGuy	170ish	02:34
=== rpedro_ [n=rpedro@87-196-106-205.net.novis.pt] has joined #ubuntu
FusionXN1	Anyone know how to rename a harddrive	02:34
zcat[1]	anybody got libdvdcss2 working on amd64? is there a repo somewhere? or a howto?	02:34
timalot	ardchoille, compiz ... , its a small thing, but i want to run it without it first having to replace metacity	02:34
Jack_Sparrow	SlyGuy: glxgears -printfps	02:34
SlyGuy	is 170 low for tihs simple animation?	02:34
=== CyDrive [n=owner@ool-18ba06b7.dyn.optonline.net] has left #ubuntu []
yoshiznit123	fusionxn1, do you mean rename the mount point or the label?	02:34
drupsta	Seveas, any way thanks a lot	02:34
SlyGuy	i can see the fps	02:35
micahcowan	drupsta, if it existed, it looks like it'd be #ubuntu-dz, but that doesn't seem to exist.	02:35
FusionXN1	yosh its named sdb1 i would like to name it storage	02:35
Jack_Sparrow	SlyGuy: My 6600 Nvidia gets 6000+ fps	02:35
SlyGuy	yeah ok its nt working right	02:35
SlyGuy	wtf	02:35
yoshiznit123	try this	02:35
ardchoille	timalot: I have seen a lot of Compiz posts on the forums, you might want to look at those before you use my tutorial because I have never used compiz	02:35
drupsta	micahcowan, its still in its infancy	02:35
yoshiznit123	edit /etc/fstab, change the line with sdb1 to storage, and then do sudo mv /media/hdb1 /media/storage	02:35
zipper_	Any of you guys got any experience with TRENDnet wireless gear? Is it something you would recommend buying?	02:35
=== summerclay [n=summer@203.19.127.105] has joined #ubuntu
=== gorgeousjunkie [n=danieldo@84.203.146.181] has joined #ubuntu
SlyGuy	hmm maybe the drivers got hosed when i ran the X config to get a proper widescreen res	02:36
timalot	ardchoille, ill give that envirnoment var a try ... see how it goes	02:36
=== kozlojak [n=kozlojak@CPE000f6690cf20-CM0014f8c1908c.cpe.net.cable.rogers.com] has joined #ubuntu
FusionXN1	yoshi - can you have spaces?	02:36
ardchoille	timalot: ok	02:36
FusionXN1	like storage 1	02:36
kozlojak	any body use mono develope ?	02:36
yoshiznit123	ummm, there was a thread somewhere about that. you might need to escape with %20 in the /etc/fstab	02:37
gorgeousjunkie	hey all. I have a firewire drive mounted on my desktop, I would like to format it. How would I go about doing this?	02:37
SlyGuy	reinstalling my nvidia drivers should be the same process as when i originally installed correct?	02:37
Jack_Sparrow	yes	02:37
yoshiznit123	an alternative is to do sudo tune2fs -L "storage 1" /dev/hdb1	02:37
FusionXN1	i have searched but i cant find any help on google :(	02:37
yoshiznit123	fusionxn1, not sure if that will change the label in nautilus though... i think recent versions will	02:37
Jack_Sparrow	SlyGuy: did you ever change nvidia to nv or the other way rouhd	02:37
SlyGuy	originally i did	02:38
=== steve [n=steve@zacparkplatz.plus.com] has joined #ubuntu
yoshiznit123	fusionxn1, also, to see if it works without restarting, do sudo /etc/init.d/dbus restart :-)	02:38
SlyGuy	i forget now	02:38
micahcowan	drupsta, you seem to speak English fairly well, would that be your second-most-comfortable language, and do you need help with Ubuntu?	02:38
Jack_Sparrow	SlyGuy: try them again	02:38
FusionXN1	k thanks	02:38
=== rellim [n=max@ip70-179-171-74.dl.dl.cox.net] has left #ubuntu []
zcat[1]	anybody got libdvdcss2 working on amd64? is there a repo somewhere? or a howto?	02:38
SlyGuy	i am not an expert so i don't know where stuff is here...	02:38
Seveas	!seveas > zcat[1]	02:38
=== davey_ [n=chatzill@c-67-182-44-11.hsd1.ca.comcast.net] has joined #ubuntu
SlyGuy	thats in the x.conf?	02:38
davey_	I messed it up more I think	02:39
davey_	I answered a question wrong	02:39
micahcowan	!restricted	02:39
FusionXN1	OMG YOSHI	02:39
ubotu	For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats	02:39
micahcowan	zcat, ^^^	02:39
davey_	and I coudlnt' go back so I trying to use escape	02:39
micahcowan	have you read that yet?	02:39
zipper_	!trendnet	02:39
ubotu	I know nothing about trendnet - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	02:39
davey_	and now It still doesn't work	02:39
zcat[1]	Seveas: yeah, for amd64? synaptic says somerthing refers to libdvdcss2 but there's no current version..	02:39
zipper_	!laptop	02:39
ubotu	Laptop support information can be found on http://wiki.ubuntu.com/HardwareSupportMachinesLaptops - http://www.linux-laptop.net/ - http://wiki.ubuntu.com/LaptopTestingTeam - http://tuxmobil.org	02:39
FusionXN1	You are the man!! I have spent all day tring to get my 3rd harddrive to show in computer! THAT WORKED!	02:39
gorgeousjunkie	how do I format a firewire volume that's mounted on my deskop?	02:39
SlyGuy	Jack: where are those settings again?	02:39
FusionXN1	Thanks so mch Yoshi	02:39
davey_	ex-parrot, you stil their	02:39
Seveas	zcat[1] , I have amd64 packages, for amongst others libdvdcss2	02:39
FusionXN1	much*	02:39
GoldenEagle68	relim: you there?	02:40
=== Shamalamastreetm [n=shamalam@modemcable194.123-83-70.mc.videotron.ca] has joined #ubuntu
drupsta	micahcowan, yes its my second language and i more comfortable with it	02:40
GoldenEagle68	relim: here's what I got	02:40
davey_	ex-parrot, configured it wrong, when it asks me the question how much memorty to give my graphics card it doesn't fill it in for me and I think my card doesn't have any memory on it	02:40
zcat[1]	ok, will take another look then... I just added the mirror.ubuntulinux.nl mirror...	02:40
Shamalamastreetm	heya, I just tried to install ubuntu and I have 2 major problems: 1) it cannot get a DHCP through my wireless, and 2) GRUB fails to load my RAID 0 array	02:41
davey_	ex-parrot, and while I'm working on it, sometimes it would fliker with the old graphics driver, can that be fixed with the new config I have to do	02:41
=== kbrosnan [i=kbrosnan@ip68-230-152-71.ri.ri.cox.net] has joined #ubuntu
Shamalamastreetm	any ideas?	02:41
mjr	Shamalamastreetm, 2) is to be expected, grub doesn't grok raid. You have to have the kernel on a non-raid (or a mirrored) partition	02:41
=== dazvid [n=david@c211-28-32-99.frank1.vic.optusnet.com.au] has joined #ubuntu
=== Krhis [n=Krhis@cblcpe-79-205.suite224.net] has joined #ubuntu
yoshiznit123	fusionxn1, no problem :-)	02:42
Shamalamastreetm	does ubuntu boot another way (ie. any raid support at all?)	02:42
=== j_ack [n=rudi@p508DC1B5.dip0.t-ipconnect.de] has joined #ubuntu
yoshiznit123	fusion, out of curiosity, which way did you do it?	02:42
=== hoehaver [n=john@cyrlokhed01-pool0-a242.cyrlok.tds.net] has joined #ubuntu
mjr	Shamalamastreetm, well you can make a boot CD or something if you like...	02:43
eyequeue	!raid	02:43
ubotu	Tips and tricks for RAID and LVM can be found on https://wiki.ubuntu.com/RaidConfigurationHowto and http://www.tldp.org/HOWTO/LVM-HOWTO	02:43
drupsta	micahcowan, yes if you could guide me how to start translating ubuntu to my local language....i mean the common requirement for translating be in any language..that would be great	02:43
FusionXN1	yoshi i put sudo /etc/init.d/dbus restart and it showed in computer	02:43
=== jaek [n=jake@x101-149-4.dhcp.umn.edu] has joined #ubuntu
Shamalamastreetm	thanks ubotu	02:43
FusionXN1	ubuntu is VERY stable isn't it	02:44
hoehaver	http://nl.archive.ubuntu.com/ubuntu-cdimages/edgy/knot-1/	02:44
hoehaver	that url is for ubuntu 6.10	02:44
yoshiznit123	yup :-)	02:44
=== reon [n=reon@dsl-145-25-191.telkomadsl.co.za] has joined #ubuntu
hoehaver	its a ...pre beat i think	02:44
FusionXN1	how i didnt tihnk it was out yet	02:44
hoehaver	but!!!	02:44
=== ] ] ] KaMZaTa[[[ [n=] ] ] KaMZa@host203-240.pool872.interbusiness.it] has joined #ubuntu
=== seshomaru [n=kitty@60.63.160.202] has joined #ubuntu
Shamalamastreetm	would .10 help with wireless or raid?	02:44
hoehaver	when it comes out ...um...can i just update it from this one?	02:44
seshomaru	hello , need help with installing new firefox	02:45
hoehaver	bc i was going to download this ubuntu and just updae it.	02:45
FusionXN1	ses it should just update	02:45
hoehaver	would that work	02:45
FusionXN1	i have 1.5.0.5	02:45
jrib	hoehaver: yes	02:45
seshomaru	it should?	02:45
muep_	yes	02:45
seshomaru	how do i know which version i have?	02:45
=== kb2688 [n=biju@ool-4353619b.dyn.optonline.net] has joined #ubuntu
muep_	1.5.0.5 is in the repos	02:46
FusionXN1	yes mine did open firefox / thunderbird and goto the update utility and see if it finds the update	02:46
hoehaver	:D	02:46
muep_	firefox has an about screen	02:46
hoehaver	yay, im gonna be running 6.10 by tonight :D:D:D	02:46
FusionXN1	yep	02:46
jrib	seshomaru: are you running ubuntu dapper 6.06?	02:46
muep_	it should show the version	02:46
drupsta	micahcowan, any way thanks for your help	02:46
=== sobersabre [n=bilbo@l85-130-142-204.broadband.actcom.net.il] has joined #ubuntu
FusionXN1	Oh i have a question - im on 6.06 when 6.10 comes out will my 6.06 update to 6.10?	02:46
sobersabre	hi does anybody know arabic in here ?	02:46
hoehaver	muep_ you can change the theme of firefox aswell	02:46
jrib	FusionXN1: yes	02:46
seshomaru	i got version 1.5.0.4	02:46
=== yoshiznit123 [n=sciyoshi@adsl-75-3-36-116.dsl.chcgil.sbcglobal.net] has left #ubuntu []
=== j_ack [n=rudi@p508DC1B5.dip0.t-ipconnect.de] has joined #ubuntu
hoehaver	i have mine um.....black something	02:46
hoehaver	its cool	02:46
FusionXN1	sweet thanks jrib	02:47
zcat[1]	Seveas: problem solved; I was using dapper instead of breezy!!!	02:47
eyequeue	FusionXN1, not until you okay it	02:47
=== zcat[1] is a moron sometimes
FusionXN1	eye - how?	02:47
muep_	seshomaru: have you updated the system lately?	02:47
seshomaru	everyday	02:47
eyequeue	FusionXN1, you will have to issue the commands	02:47
FusionXN1	^^ ya?	02:47
=== cius [n=cius@c-68-52-104-93.hsd1.tn.comcast.net] has joined #ubuntu
FusionXN1	eye what will i have to do	02:47
jrib	seshomaru: do you have the dapper-security repositories enabled?	02:47
=== sobersabre needs to ask somebody who knows arabic
seshomaru	mmm-not sure	02:47
muep_	FusionXN1: there will probably be an easy way wen 6.10 is ready	02:47
eyequeue	FusionXN1, change sources.list, then two apt-get commands, update and dist-upgrade	02:48
FusionXN1	i hope so can you just update form version to version?	02:48
jrib	seshomaru: are you comfortable understanding and editing /etc/apt/sources.list or would you like some help with that?	02:48
seshomaru	i downloaded the new firefox from mozilla but cant install it	02:48
seshomaru	i can try.....	02:48
hoehaver	DOES ANY on have 6.10 installed	02:48
eyequeue	FusionXN1, that's the most complex it's been, the simplest, well, watch ubotu :)	02:48
eyequeue	!upgrade	02:48
hoehaver	if so, did you find any bugs??	02:48
ubotu	Upgrading to Ubuntu 5.10 breezy -> http://wiki.ubuntu.com/BreezyUpgrade Upgrading to Ubuntu 6.06 Dapper -> https://wiki.ubuntu.com/DapperUpgrades Note: gksudo "update-manager -d" always updates to the latest development version.	02:48
muep_	FusionXN1: I have heard that 5.10 had a button to upgrade to 6.06 when it came out	02:48
zcat[1]	hoehaver: yes. Hundreds	02:48
jrib	seshomaru: it's preferred (and also easier) to use the repositories	02:48
=== drbreen [n=drbreen_@RAS24-022.UNI-MUENSTER.DE] has joined #ubuntu
=== SlyGuy [n=cduhard@S0106000fb55ad233.wp.shawcable.net] has joined #ubuntu
seshomaru	i just open it with gedit and add a line ?	02:49
=== rob [i=Robert@freenode/staff/ubuntu.member.rob] has joined #ubuntu
SlyGuy	woot just hosed X	02:49
jrib	seshomaru: post the contents of your current /etc/apt/sources.list if you want on http://paste.ubuntu-nl.org and give us a link	02:49
FusionXN1	so i run gksudo "update-manager -d and it goes to 6.10 when its out?	02:49
hoehaver	oo.....so i should just wait eh?	02:49
seshomaru	ok - just a sec	02:49
SlyGuy	ok "nv" is the nvidia driver right? and nvidia is OSS crap one?	02:49
zcat[1]	hoehaver: every update is a major gamble.. edgy is NOT ready for general use...	02:49
eyequeue	seshomaru, sudo apt-get update ; sudo apt-get upgrade	02:49
synic	SlyGuy: other way around	02:49
jrib	FusionXN1: I believe that will give you the current devel version, don't do that unless you want a broken system	02:49
SlyGuy	hmm	02:49
muep_	FusionXN1: no, the -d is for development versions	02:49
zcat[1]	otoh I am using it right now :)	02:49
FusionXN1	k	02:50
SlyGuy	ok somehow my driver were broke	02:50
muep_	there was a different switch for latest stable release	02:50
muep_	update-manager --help	02:50
muep_	it explains	02:50
eyequeue	FusionXN1, no, with that -d it would do it NOW :) when it's released, omit the -d	02:50
SlyGuy	i had them working that i ran the x config to get my proper sscreen res and everything is hosed now	02:50
FusionXN1	I have an nvidia "splash" at start-up does that mean i got my nvidia drivers installed ok?	02:50
synic	FusionXN1: usually	02:50
Mixx`	yeah	02:50
FusionXN1	k thanks eye	02:50
hoehaver	well...im downloading 6.10 right now....if i just download it and put it on a disk...when 6.10 'offically' comes out and its stable. can i install my 'pre version' and update it	02:50
rpedro_	is there a command line to create an iso from an audio cd ?	02:50
hoehaver	with the updates will it fix the bugs	02:50
hoehaver	??	02:50
SlyGuy	ok i need to reinstall the nvidia drivers then	02:51
eyequeue	FusionXN1, the real method? /join #ubuntu around then and watch for 30 seconds, lol	02:51
FusionXN1	Well i got Cedega and it wont run guild wars	02:51
synic	rpedro_: dd if=/dev/hdc of=/some/file.iso	02:51
SlyGuy	i hope i don't lose my proper resolution again	02:51
FusionXN1	watch lol?	02:51
seshomaru	jrib , mey /etc/apt/sources is an empty file	02:51
rpedro_	synic: ok, will try, cat is giving me an error	02:51
eyequeue	hoehaver, yes, but, it's just the same as updating from what you have in dapper today	02:51
zcat[1]	hoehaver: you might as well just wait, half of it gets replaced every update	02:51
jrib	seshomaru: /etc/apt/sources.list <-- note the end	02:51
=== drupsta [n=CHICKEN@CPE0010b5e5fded-CM000f9f7c3c6c.cpe.net.cable.rogers.com] has left #ubuntu ["Leaving"]
seshomaru	jrib sorry	02:52
=== Senesence [n=senesenc@ool-4354af9b.dyn.optonline.net] has joined #ubuntu
SlyGuy	just gotta find that nice binary driver install tutorial again :)	02:52
] ] ] KaMZaTa[[[	can anybody tell me how can i assign to keys function of my mouse (Logitech mx610) some rapid command (example.. alt + left arrow)? Tnks	02:52
eyequeue	hoehaver, there is very little that has changed in today's edgy that won't also change again before release	02:52
Jack_Sparrow	!atiSlyGuy:	02:52
ubotu	I know nothing about atiSlyGuy: - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	02:52
Jack_Sparrow	!ati	02:52
ubotu	To install the Ati/NVidia drivers for your video card, see https://wiki.ubuntu.com/BinaryDriverHowto	02:52
rpedro_	synic: "dd: a lr `/dev/hdc': Input/output error" :-/	02:52
jrib	seshomaru: it's ok :)	02:52
eyequeue	!ati > SlyGuy	02:52
FusionXN1	well it says i have "nvidia" not "nv" is that the nvidia driver? Guild wars says my graphics card isnt supported?!?! its 7900gt!	02:52
=== sproingie [n=chuck@64-121-2-59.c3-0.sfrn-ubr8.sfrn.ca.cable.rcn.com] has joined #ubuntu
synic	rpedro_: is hdc the one you want to make an iso of?	02:52
Senesence	Does anyone know how to setup proper icons for Blender3d?	02:53
rpedro_	synic: yep	02:53
synic	rpedro_: do you see a bunch of drive ready seek complete errors if you type dmesg ?	02:53
rellik	ls	02:53
=== ] ] ] KaMZaTa[[[ is now known as KaM
=== bl3ssing [n=bl3ssing@c-69-142-180-104.hsd1.nj.comcast.net] has joined #ubuntu
sproingie	anyone know how to make metacity resize windows with alt and the right mouse button instead of the middle?	02:53
rpedro_	synic: no, it spits out the error instantaneously	02:53
ardchoille	Senesence: Do you mean to add blender to the gnome menu?	02:54
=== ashridah [i=ashridah@220-253-120-94.VIC.netspace.net.au] has joined #ubuntu
=== KaM is now known as KaMZa
KaMZa	can anybody tell me how can i assign to keys function of my mouse (Logitech mx610) some rapid command (example.. alt + left arrow)? Tnks	02:54
seshomaru	jrib http://paste.ubuntu-nl.org/19134	02:54
=== pk0nink [n=roselawn@c-71-56-157-9.hsd1.or.comcast.net] has joined #ubuntu
ashridah	hey. anyone run into any weird issues with fonts while poking at edgy?	02:54
sproingie	my middle mouse button is really stiff (one of those new MS mice with the crummy no-click scrollwheel)	02:54
FusionXN1	KaM i got G5 i would like to know too :)	02:54
Senesence	ardchoille: Yes,	02:54
jrib	KaMZa: use xbindkeys and xvkbd, search the wiki for the mx1000 guide if you want an example	02:54
=== drbreen [n=drbreen_@RAS24-095.UNI-MUENSTER.DE] has joined #ubuntu
eyequeue	ashridah, ask on #ubuntu+1	02:54
ashridah	aah, sneaky	02:55
ardchoille	Senesence: Right-click on the menu "Applications", choose "Edit Menus", then go to the desired section of the menus in alacarte and add a new item	02:55
=== ashridah [i=ashridah@220-253-120-94.VIC.netspace.net.au] has left #ubuntu ["Konversation]
bl3ssing	if I delete all the users in the group users list, will anything bad happen? :D I just want there to be 2 users: the root and the ME. :)	02:55
=== ttyfscker [n=ttyfscke@71.31.1.2] has joined #ubuntu
=== Ademan [n=dan@h-69-3-234-229.snfccasy.dynamic.covad.net] has joined #ubuntu
eyequeue	bl3ssing, you were planning on deleting all those system users? don't	02:55
synic	bl3ssing: you talking about in the groups tab?	02:55
ardchoille	bl3ssing: You need some of those users	02:55
FusionXN1	If i have "nvidia" as my driver does that mean i have nvidia as i have been told "nv" is the nvidia driver	02:56
KaMZa	jrib: but with xbindkeys i can only assign to key application start, right?	02:56
Jack_Sparrow	!ati	02:56
ubotu	To install the Ati/NVidia drivers for your video card, see https://wiki.ubuntu.com/BinaryDriverHowto	02:56
synic	FusionXN1: 'nvidia' is the one you want.	02:56
eyequeue	bl3ssing, those are there for a reason, or vecause you installed certain packages, etc	02:56
ardchoille	FusionXN1: I believe the nv driver is for 2d and nvidia is for 3d	02:56
rpedro_	synic: I'm trying to create an iso from an audio cd, I am using the command line cause either gnomebaker or k3b first extract the individual tracks to .wav and then burn back, and I would like a perfect copy, clone mode in k3b burns a coaster cd	02:56
FusionXN1	synic i got that one but Guild Wars says my 7900gt isnt supported?!?! (in Cedega)	02:56
jrib	KaMZa: no, if you can use it to call xvkbd and send a keyboard key combo, the wiki page for the mx1000 has the alt+left example specifically	02:56
FusionXN1	ard - thanks	02:57
Senesence	ardchoille: There was no blender icon there.	02:57
synic	FusionXN1: in here, type ard and then press tab.	02:57
KaMZa	jrib: ok, now take a look. Tnks	02:57
seshomaru	http://paste.ubuntu-nl.org/19134	02:57
jrib	seshomaru: yep you seem to have security enabled, type this: sudo apt-get update && sudo apt-get install firefox	02:57
FusionXN1	synic - tab?	02:57
synic	the tab key.	02:57
ardchoille	Senesence: You have to make a new menu item for it	02:57
seshomaru	jrib -thank you	02:57
=== hoehaver [n=john@cyrlokhed01-pool0-a242.cyrlok.tds.net] has left #ubuntu []
ardchoille	Senesence: Look under the File menu in alacarte	02:58
jrib	seshomaru: let me know if that works, you can check what version you have of firefox with 'apt-cache policy firefox'	02:58
eyequeue	FusionXN1, tab, near caps lock probably	02:58
FusionXN1	i know whats it for	02:58
seshomaru	jrib ok	02:58
FusionXN1	eyequeue: i see :) cool	02:58
FusionXN1	thanks :)	02:58
synic	FusionXN1: sweet, eh?	02:58
=== joubert [n=joubert@68-116-199-179.dhcp.oxfr.ma.charter.com] has joined #ubuntu
eyequeue	FusionXN1, e y e tab :)	02:58
=== yoshiznit123 [n=sciyoshi@adsl-75-3-36-116.dsl.chcgil.sbcglobal.net] has joined #ubuntu
synic	FusionXN1: um... can you apt-get install foobillard and see if it runs quickly?	02:58
Senesence	ardchoille: I'm just looking for a blender icon that I can set on a shortcut leading to the blender executable. I don't need a new menu.	02:58
FusionXN1	oops	02:58
=== Hawk\|- [n=Hawk@p549CC2CD.dip0.t-ipconnect.de] has joined #ubuntu
FusionXN1	synic yours dont work	02:59
=== sobersabre [n=bilbo@l85-130-142-204.broadband.actcom.net.il] has left #ubuntu ["Ex-Chat"]
=== shawn_ [n=shawn@c-68-36-35-231.hsd1.nj.comcast.net] has left #ubuntu ["Leaving"]
synic	FusionXN1: type syn and press tab a few times	02:59
=== kb2688 [n=biju@ool-4353619b.dyn.optonline.net] has joined #ubuntu
ardchoille	Senesence: Oh, ok, well you said yes when I asked if you wanted a new menu item. Look in /usr/share/pixmaps or /usr/share/icons for a blender icon	02:59
FusionXN1	it shows synic synth7	02:59
eyequeue	FusionXN1, the same happens with tab in bash btw	02:59
jrib	Senesence: /usr/share/pixmaps/blender.xpm seems to be it for me	03:00
synic	FusionXN1: yeah, if there's more then one match, you have to be more specific	03:00
FusionXN1	ok	03:00
seshomaru	jrib - i got the latest version now , thank you !	03:00
FusionXN1	Anyone know how to stop the nvidia splash start-up?	03:00
yoshiznit123	fusionxn1, whats up?	03:00
synic	FusionXN1: but yeah, apt-get install foobillard	03:00
=== ulinskie [n=cisco@202.57.88.42] has joined #ubuntu
synic	FusionXN1: you can see if your 3d is working.	03:00
FusionXN1	foobillard whats that?	03:00
FusionXN1	ok thanks	03:00
synic	just a billards game	03:00
JoseGosdin	Foobillard is a billiards game with a three dimensional display.	03:00
synic	but it's opengl	03:01
Senesence	Ok jrib thanks, but how many other blender icon choices are there, and how can I find them all.	03:01
synic	... so if your 3d isn't working, you'll know right away.	03:01
FusionXN1	yoshi how do i stop the nvidia splash screen	03:01
yoshiznit123	fusion, edit /etc/X11/xorg.conf and add Option "NoLogo" "true" under device	03:01
Jack_Sparrow	FusionXN1: Splash info here https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia#head-20c0b7106f06055eed889efe3946f560c34a8b1a	03:01
FusionXN1	k 1 mo	03:01
FusionXN1	bilard first	03:01
FusionXN1	synic done	03:02
FusionXN1	where i go now?	03:02
synic	press alt+f2 and type foobillard	03:02
FusionXN1	nice shortcut	03:02
=== Heartsbane [n=ne1469@166.70.210.102] has joined #ubuntu
=== vanTongeren_ [n=vanTonge@ip3e839d19.speed.planet.nl] has joined #ubuntu
FusionXN1	Wow i love this game! HAHA	03:03
FusionXN1	ya it works	03:03
synic	groovy.	03:03
vanTongeren_	hi, anyone knows how I can make my computer mount hda2 when I boot the computer?	03:03
synic	yeah, I spend hours playing that game :)	03:03
eyequeue	thunderbird has a security upgrade, who was asking about it?	03:03
synic	vanTongeren_: put it in /etc/fstab	03:03
FusionXN1	how do i do it	03:03
=== kb2688 [n=biju@ool-4353619b.dyn.optonline.net] has left #ubuntu ["Ex-Chat"]
synic	FusionXN1: scrolling your mouse wheel selects power	03:03
FusionXN1	ok space :)	03:03
synic	middle click hits the ball	03:03
ardchoille	!fstab > vanTongeren_	03:04
=== kb2688 [n=biju@ool-4353619b.dyn.optonline.net] has joined #ubuntu
=== JoseGosdin is now known as PHP`
=== Digichrome [n=Digichro@200.249.205.68.cfl.res.rr.com] has joined #ubuntu
FusionXN1	mm how do i name	03:04
FusionXN1	i aim*	03:04
synic	drag your mouse cursor around the window	03:04
vanTongeren_	im in the file now, now what	03:04
synic	(hold the left button)	03:04
=== xsquared [n=xsquared@dsl-58-6-121-220.qld.westnet.com.au] has joined #ubuntu
FusionXN1	ahh :)	03:05
xsquared	hello	03:05
=== Tonren [n=mcantor@ool-45724cb6.dyn.optonline.net] has joined #ubuntu
=== Senesence [n=senesenc@ool-4354af9b.dyn.optonline.net] has left #ubuntu []
FusionXN1	w00t 2 balls 1 shot	03:05
Tonren	Hey guys, I installed KDE and then uninstalled it, and it broke GNOME. All of my system tools are gone! Is htere a way to get back my stuff without reinstalling ubuntu?	03:05
synic	Tonren: apt-get install ubuntu-desktop	03:06
FusionXN1	synic - thanks bud that game rock	03:06
xsquared	i have just installed the mozilla-acroread package so i can read pdfs in firefox however, when i visit a pdf document, it wants me to open it in document viewer or something	03:06
Tonren	synic: you're a god	03:06
FusionXN1	anit he	03:06
vanTongeren_	i have this	03:06
vanTongeren_	/dev/hda2 /mnt/hda2 vfat,ext3,ext2,reiserfs noauto,users,exec 0 0	03:06
ChocoCid	you have to change the default program, i think	03:06
xsquared	how can i change it so i can see it will open in acroread	03:06
synic	FusionXN1: for another addictive oss game, apt-get install bzflag :)	03:06
FusionXN1	so is yoshiznit123	03:06
ChocoCid	not sure how to do tht for PDF though :(	03:06
=== brennanos [n=brennan@dsl204-187.BHI.COM] has joined #ubuntu
Tonren	synic: It didn't work. It said no packages will be installed, removed or upgraded	03:06
=== dazvid [n=david@c211-28-32-99.frank1.vic.optusnet.com.au] has joined #ubuntu
brennanos	hi... I want to convert an AVI file to a different format... what application can I use to do that?	03:07
diesel	Can I use the dapper desktop CD to install just dapper server?	03:07
synic	Tonren: hrmm, then everything is installed. What is missing, and where is it missing from?	03:07
eyequeue	dieman, can, i think, but the server cd is a batter choice	03:07
=== hussam_ [n=hussam@194.146.153.38] has joined #ubuntu
Tonren	synic: In APplicatoins -> System Tools, only Terminal is there	03:08
eyequeue	diesel, rather	03:08
synic	Tonren: what are you wanting to be there?	03:08
=== kenny [n=kenny@pool-71-108-103-4.lsanca.dsl-w.verizon.net] has joined #ubuntu
synic	Tonren: I only have nmap in there	03:08
Tonren	synic: I'm actually not sure. I just fee llike there had to be more stuff in there.	03:08
diesel	eyequeue: rather??? rather what?	03:08
synic	Tonren: maybe you're looking for the stuff in System->Administration	03:08
whaley	question mates, i upgraded directly to dapper from breezy. (ubuntu/gnome).. i noticed some of my gnome look and feel changed, but not much. however, when i create a new account, the gnome desktop has a complete different look and layout. Is there something in my /home folder that is keeping the breezy look and feel?	03:09
FusionXN1	synic whats bzfrag	03:09
=== bl3ssing [n=bl3ssing@c-69-142-180-104.hsd1.nj.comcast.net] has left #ubuntu ["Leaving"]
eyequeue	dieman, can, i think, but the server cd is a batter choice <--- for diesel	03:09
kenny	how do i find out what my cpu is runing at?	03:09
ardchoille	Tonren: Terminal shouldn't even be there unless you put it there. Terminal is usually in Applications -> Accessories	03:09
synic	FusionXN1: it's an old ass opengl tank game... you play with other people online.	03:09
FusionXN1	cool!	03:09
synic	FusionXN1: but it's addictive as hell :)	03:09
ardchoille	FusionXN1: And it's very fast paced.	03:09
=== admi [n=admi@FT-ESR1-208-102-64-121.fuse.net] has joined #ubuntu
=== elamericano [n=elameric@mail.atheros.com] has joined #ubuntu
=== keito [n=keito@193.216.61.248] has joined #ubuntu
eyequeue	whaley, /home is never changed, try looking under /etc/skel/ for what is the new default, and edit files accordingly if you want that	03:10
admi	how do i save /etc/apt/sources.list while in terminal?	03:10
synic	admi: what are you editing it with?	03:10
Tonren	Hmmmm	03:10
eyequeue	admi, what editor are you in?	03:10
kenny	any help here?	03:10
admi	editing under root in terinmal	03:10
=== Digichrome [n=Digichro@200.249.205.68.cfl.res.rr.com] has left #ubuntu []
Tonren	synic: What game?	03:10
whaley	eyequeue: i'll give that a look	03:10
synic	admi: yeah, but what editor?	03:10
synic	Tonren: bzflag	03:10
yoshiznit123	kenny, try using 'top'	03:10
ChocoCid	use gedit, or vi, or...	03:10
eyequeue	admi, what editor are you in?	03:10
admi	konsole	03:10
FusionXN1	BRB	03:11
yoshiznit123	kenny, or do cat /proc/cpuinfo	03:11
eyequeue	admi, what editor are you in?	03:11
elamericano	kosole's not an editor	03:11
ChocoCid	er... that's your terminal..	03:11
kenny	thanx mate	03:11
admi	that's what i have it opened in	03:11
eyequeue	admi, what command did you type?	03:11
synic	admi: how did you open this file?	03:11
Tonren	hm	03:11
jrib	admi: sudo nano /etc/apt/sources.list <-- that is probably the easiest editor for you	03:11
ardchoille	admi: you're in the nano editor	03:11
admi	i did that	03:11
=== NineTeen67Comet [n=justin@040M16.oasis.mediatti.net] has joined #ubuntu
synic	ctrl+x	03:11
Tonren	Yo, does anyone know what the dela with compiz is? What is it? What does it do?	03:11
admi	that saves changes to it?	03:11
synic	well, it asks you if you want to save	03:12
carolyn	remember to use 'nano -w'	03:12
=== wenko2 [n=wenko2@S0106001217036213.ca.shawcable.net] has joined #ubuntu
=== FusionXN1 [n=scott@86.112.192.129] has joined #ubuntu
=== wastrel [n=wastrel@dsl254-127-242.nyc1.dsl.speakeasy.net] has joined #ubuntu
FusionXN1	back	03:12
=== Pathfinder_ [n=andrew@cpe-72-226-202-146.rochester.res.rr.com] has joined #ubuntu
mjr	Tonren, experimental eyecandy, nothing you should concern yourself with yet	03:12
kenny	ugh	03:12
diesel	eyequeue: so is installing the barebones server possible with the desktop CD...it would seem like it would be.	03:12
kenny	its only running at 300	03:12
wastrel	ubunto	03:12
Tonren	mjr: Ahh.	03:12
FusionXN1	How come i just got a message form GNOME saying its been updated and my old desktop from 2.4 can be found from a link on the desktop?	03:12
NineTeen67Comet	Any proftpd users in here? I'm needing to give a few users access to their /www/ directories for each of their sites .. help?	03:12
Renan_s2	FusionXN1, I got the same message here	03:12
whaley	erm, /etc/skel seems to be what is distributed on the live cds	03:12
eyequeue	diesel, i think it is, i know it is with the alternate or server cd	03:12
FusionXN1	Renan - was it an update?	03:12
Renan_s2	FusionXN1, no, I had done a clean install	03:13
FusionXN1	nothing in the folder though	03:13
FusionXN1	i didnt	03:13
eyequeue	whaley, /etc/skel/ are the templates used for new accounts	03:13
whaley	i mean to say, the only directory is a symlink to an Examples directory /usr/share/example-conten	03:13
whaley	eyequeue: negative	03:13
eyequeue	whaley, which is where your new user "feel" came from	03:13
=== NineTeen67Comet is there an easier ftp server that I can try (headless server) ..
elamericano	Does anyone know how to get 256 colors in gnome-terminal?	03:14
=== jwhayman [n=jwhayman@199.172.232.84] has joined #ubuntu
=== nasdaq7 [i=nasdaq7@tkp-ip-nas-1-p222.telkom-ipnet.co.za] has joined #ubuntu
synic	elamericano: what for?	03:14
=== Malachi [n=Malachi@dsl-39-205-rb5.ka.centurytel.net] has joined #ubuntu
elamericano	TERM=xterm-256color, doesn't seem to be recognized.	03:14
elamericano	The syntax highlighting in VIM is sub-par at 16 colors, to say the least.	03:15
whaley	eyequeue: a ls -a on /etc/skel reveals only .bash* files and an Examples symlink	03:15
=== whaley shrugs
eyequeue	whaley, ls -la /etc/skel	03:15
Renan_s2	elamericano, I think that terminals only support 16-colors	03:15
synic	elamericano: pretty sure you can't change what vim thinks it can do	03:15
=== kozlojak [n=kozlojak@CPE000f6690cf20-CM0014f8c1908c.cpe.net.cable.rogers.com] has joined #ubuntu
jwhayman	hi there, im trying to adjust the resolution of my monitor without success, ive used dpkg-reconfigure xserver-xconfig numerous times but it doesnt seem to recognise the changes in gnome, is there any other way to change the resolution please?	03:15
eyequeue	whaley, right, those are the new user configs	03:15
synic	elamericano: you can use more colors in gvim: http://synic.ath.cx/gvim.png	03:15
eyequeue	whaley, .bash*	03:15
whaley	erm.... oh. Diddn't think those things would be in bash config files	03:15
synic	elamericano: er.. http://synic.ath.cx/vim.png	03:15
elamericano	I'd like to stay in terminal synic.	03:15
kozlojak	how do i get nautilus to run mono exe files when i double click on them ?	03:16
synic	elamericano: yeah, vim won't do more colors than that in the terminal	03:16
eyequeue	whaley, supposedly you can put other files in there to be populated into new $HOMEs as well	03:16
whaley	interesting	03:16
elamericano	If I type xterm, I get an xterm terminal that can do 256 colors. I was wondering if gnome-terminal can do the same thing.	03:16
=== Pathfinder_ [n=andrew@cpe-72-226-202-146.rochester.res.rr.com] has left #ubuntu []
eyequeue	whaley, things that are site-specific would be good candidates i guess	03:17
robertj	can gparted create extended partitions?	03:18
wastrel	hi	03:18
synic	elamericano: I didn't know you could do that. Can you post a screenshot?	03:18
whaley	eyequeue: it seems like only .bashrc is different than my original (per a diff command)	03:18
whaley	its worth a shot to backup my original and give this one a try	03:18
=== SlyGuy [n=cduhard@S0106000fb55ad233.wp.shawcable.net] has joined #ubuntu
whaley	eyequeue: thanks for your help :)	03:18
SlyGuy	well, i can't install these damn drivers	03:18
eyequeue	whaley, other apps of course might have their /etc/ dirs and files too of course	03:19
SlyGuy	that tutorial does not work	03:19
ardchoille	SlyGuy: which tutorial and what problems are you experiencing?	03:19
Shamalamastreetm	does lilo support RAID?	03:20
eyequeue	robertj, as opposed to primary? i'm sure it has to	03:20
Shamalamastreetm	grub doesnt	03:20
synic	Shamalamastreetm: software raid?	03:20
SlyGuy	the BinaryDriverHOwto tutorial	03:20
synic	grub /does/ support raid	03:20
Shamalamastreetm	yes sw raid 0	03:20
Shamalamastreetm	it does?	03:20
ardchoille	SlyGuy: nvidia?	03:20
SlyGuy	everything goes smoothly but i retartt X and no nvidia drivers	03:20
Shamalamastreetm	grub is crapping out on the install	03:20
synic	yeah, booting off of a full root raid 1 here	03:20
Ademan	hey whats the package for voodoo 3 drivers?	03:20
SlyGuy	no splash screen and gl	03:20
XVampireX	nvidia-glx-legacy	03:20
XVampireX	ah	03:21
XVampireX	wait	03:21
=== braindead_moron [n=richard@c-71-205-13-127.hsd1.mi.comcast.net] has joined #ubuntu
XVampireX	I don't know	03:21
XVampireX	!voodoo	03:21
ubotu	I know nothing about voodoo - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	03:21
Ademan	hehe voodoo3 was 3dfx	03:21
XVampireX	Yeah	03:21
robertj	eyequeue: im having a real tough time with the gui install	03:21
XVampireX	hmm	03:21
Ademan	!3dfx	03:21
XVampireX	!3dfx	03:21
ubotu	I know nothing about 3dfx - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	03:21
ardchoille	SlyGuy: Can you post your xorg.conf file to pastebin?	03:21
robertj	never once had a problem with debian-installer :(	03:21
XVampireX	:P	03:21
synic	Shamalamastreetm: http://synic.ath.cx/menu.lst	03:21
eyequeue	robertj, i always use the text install, but ask your questions anyway :)	03:21
=== rob [i=Robert@freenode/staff/ubuntu.member.rob] has joined #ubuntu
synic	Shamalamastreetm: notice the root= param	03:21
SlyGuy	i tried changing the setting to nvidia from nv and x won't start	03:21
FusionXN1	Ktorrent is a nice program, why is there a lot of nice programs for linux and not windows?!	03:22
XVampireX	Hey	03:22
eyequeue	robertj, something similar to d-i is on the alternate cd :)	03:22
XVampireX	There's uTorrent for windows	03:22
XVampireX	KTorrent is not nice	03:22
eyequeue	!d-i	03:22
ubotu	Ubuntu can be installed in lots of ways. Please see https://wiki.ubuntu.com/Installation for documentation. Problems during install? See https://wiki.ubuntu.com/CommonProblemsInstall and https://wiki.ubuntu.com/DapperReleaseNotes/UbiquityKnownIssues	03:22
FusionXN1	XV i know but Ktorrent looks smooth	03:22
Shamalamastreetm	synic i c, ithink	03:22
=== kenny [n=kenny@pool-71-108-103-4.lsanca.dsl-w.verizon.net] has joined #ubuntu
=== QuagMire [n=CHICKEN@CPE0010b5e5fded-CM000f9f7c3c6c.cpe.net.cable.rogers.com] has joined #ubuntu
Renan_s2	I prefer Azureus	03:22
FusionXN1	XVampireX: why not	03:22
XVampireX	It's based on QT	03:22
braindead_moron	this doesn't work: sudo echo 43753472 > /proc/sys/kernel/shmmax and either does this sudo "echo 43753472 > /proc/sys/kernel/shmmax" nor does this sudo "`echo 43753472 > /proc/sys/kernel/shmmax`"... any ideas on how I can set shmmax via sudo?	03:22
=== [1] wenko2 [n=wenko2@S0106001217036213.ca.shawcable.net] has joined #ubuntu
FusionXN1	WHys that bad	03:22
XVampireX	I don't know	03:23
XVampireX	:P	03:23
Renan_s2	braindead_moron, sudo sh -c "echo 43753472 > /proc/sys/kernel/shmmax"	03:23
=== prophet [n=prophet@c-67-168-240-95.hsd1.or.comcast.net] has joined #ubuntu
synic	FusionXN1: it's not... mostly I think QT is ugly, but it's a good toolkit.	03:23
=== QuagMire is now known as KCOOL
=== [1] wenko2 is now known as wenko2
kenny	wats the command again?	03:23
SlyGuy	<ardchoille>: pasting	03:23
=== ubufan [i=cptCaver@200-168-152-152.dsl.telesp.net.br] has joined #ubuntu
FusionXN1	Well I like it a nice program for linux!	03:23
kenny	wats the command to see how fast your cpu is running?	03:24
braindead_moron	qt is elegant, or at least much more so then gtk.. But I usually end up hacking in wxWindows when I need a gui anyway :-(	03:24
Renan_s2	kenny, cat /proc/cpuinfo	03:24
ubufan	there is a way to remove gnome-games from Ubuntu ???	03:24
synic	FusionXN1: what do you use to listen to music on windows?	03:24
kenny	alright	03:24
kenny	thanx	03:24
=== bethko [i=bethko@norge.freeshell.ORG] has joined #ubuntu
SlyGuy	hmm need a working pastebin	03:24
FusionXN1	I hav amaroK	03:24
synic	SlyGuy: http://rafb.net/paste	03:24
ardchoille	!paste	03:24
ubotu	pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (you can always find it in the channel topic, among other useful things)	03:24
FusionXN1	Synic.. mp3s wont work :(	03:24
kenny	now its only running at 250....	03:24
braindead_moron	Renan_s2, That did it BTW, thanks!	03:25
synic	FusionXN1: what playback engine are you using for amarok?	03:25
ubufan	there is a way to remove gnome-games from Ubuntu ???	03:25
Renan_s2	:)	03:25
FusionXN1	Xine	03:25
XVampireX	Ademan, https://help.ubuntu.com/community/Voodoo3doesnotdo3d	03:25
SlyGuy	thanks	03:25
elamericano	xterm has 256 colors ===> http://img148.imageshack.us/img148/6489/screenshotdp5.gif	03:25
Ademan	hehe yeah i'm there	03:25
bethko	you dont like the games?	03:25
Asc	ubufan: yes. sudo apt-get remove gnome-games should work, or use synaptic	03:25
ubufan	no	03:25
synic	FusionXN1: maybe libxine-extracodecs has the md3 codec	03:25
SlyGuy	<ardchoille>: http://rafb.net/paste/results/pknUDK83.html	03:25
ubufan	ok	03:25
FusionXN1	1 mo then	03:26
ubufan	Can I add my own Menu with commands ???	03:26
synic	elamericano: i mean do you have a screeny of vim with 256 color highlighting?	03:26
kozlojak	how do i get nautilus to run mono exe files when i double click on them ?	03:26
ubufan	I tryed but my menu doesnt show on screen	03:26
=== mammoth [n=e32001@535311EC.cable.casema.nl] has joined #ubuntu
synic	kozlojak: just right click on the exe, choose the last tab, and change the default app that runs them	03:26
Asc	ubufan: I don't know how to use it myself, but you might try the 'alacarte' program	03:26
Asc	It's apparently a menu editor	03:27
=== vanTongeren [n=vanTonge@ip3e839d19.speed.planet.nl] has joined #ubuntu
synic	kozlojak: er... go to properties, then the last tab	03:27
ubufan	ok	03:27
=== afflux678 [n=discoflu@Ubbd2.u.pppool.de] has joined #ubuntu
=== afflux678 is now known as afflux
vanTongeren	when i edit fstab it changes itself back on reboot	03:27
=== hard_i [n=hard_i@rapla.net] has joined #ubuntu
synic	vanTongeren: are you using the livecd or something?	03:27
vanTongeren	no	03:27
ardchoille	SlyGuy: you using Ubuntu 6.06?	03:27
synic	you sure you saved it?	03:27
Shamalamastreetm	still trying to get ubuntu to install and boot with s/w RAID 0, but to no success, tried LILO and GRUB	03:27
elamericano	synic, no. When I run vim in xterm, it still has 16 colors. What term are you using?	03:27
SlyGuy	yep	03:28
braindead_moron	XVampireX, I've still got a pair of voodoo2s sitting on the shelf just waiting for some old school SLI action!	03:28
ardchoille	SlyGuy: Did you install nvidia-settings or nvidia-xconfig	03:28
vanTongeren	sure i saved it, when i opened it again it was good, when i rebooted it was restored to default	03:28
SlyGuy	nope	03:28
XVampireX	voodoo can do SLI? :P	03:28
synic	elamericano: that screenshot is gvim. I haven't been able to get vim in a terminal to run with more than 16 colors.	03:28
SlyGuy	i installed the dapper stuff	03:28
braindead_moron	voodoo2 invinted SLI	03:28
=== yumigator [n=yumigato@pool-72-81-41-116.phlapa.east.verizon.net] has joined #ubuntu
braindead_moron	AFAIK	03:28
mammoth	hi everyone	03:28
SlyGuy	i had them installed correctly	03:28
kozlojak	synic any idea what the application or command i would use to run it	03:28
XVampireX	It's kinda offtopic what we're talking, oh well	03:28
vanTongeren	it says [# Dynamic entries below, identified by 'users' option] in fstab, so can i also change the settings elsewhere	03:29
SlyGuy	then i ran the xconfig because i could only do 1024x768	03:29
ardchoille	SlyGuy: Did yu do sudo nvidia-glx-config enable ?	03:29
FusionXN1	Whats a .run do ? I want to install quake 4	03:29
SlyGuy	i have a widescreen laptop..	03:29
SlyGuy	ardchoille: yes i did	03:29
=== kwtm [n=kwtm1@adsl-75-28-1-216.dsl.sndg02.sbcglobal.net] has joined #ubuntu
synic	kozlojak: "mono %s" or something	03:29
bethko	i have the worst luck with display drivers.	03:29
kozlojak	synic thanks, i got it	03:29
mammoth	i have installed mammoth but i cannot get anything when I search .please help	03:29
elamericano	synic, this link says how to do it, but it doesn't work for me on Dapper. http://frexx.de/xterm-256-notes/	03:29
Shamalamastreetm	meh maybe XP is the only hope for this rig	03:29
ardchoille	SlyGuy: Do you have the right version of linux-restricted-modules installed.	03:30
SlyGuy	how would i know for sure?	03:30
mammoth	ubutu plse help	03:30
=== Varanger [n=salmenar@201.230.58.196] has joined #ubuntu
elamericano	It says to set TERM=xterm-256color, but vim doesn't recognize that.	03:30
Varanger	hello	03:30
braindead_moron	anyone got their intel 3945 working with 6.06 (and want to help me get mine working too :-)	03:30
Ropechoborra	How do i install my scanner (its a multifunction printer)	03:30
mammoth	my mammoth search isn't working	03:31
kwtm	How can I put text into the clipboard? Is there, for example, some DCOP command that I can use? I'm trying to figure out how to make a hotkey to insert the date. (E.g. Ctrl-Shift-D would insert today's date into whatever text application I'm running at the moment.)	03:31
FusionXN1	How do i run a file with sudo?	03:31
Ropechoborra	FusionXN1 sudo file	03:31
xsquared	FusionXN1, sudo <file>	03:31
Jenkens	my ass does not like me today	03:31
ardchoille	SlyGuy: Did you install linux-restricted-modules ?	03:31
=== bensr20det [n=ben@74.138.128.31] has joined #ubuntu
FusionXN1	i did that it says command not found	03:31
=== Dial_tone [n=steve@ip68-4-102-155.oc.oc.cox.net] has joined #ubuntu
SlyGuy	they are there	03:31
eyequeue	FusionXN1, define "run" a file	03:31
Ropechoborra	FusionXN1 are u located in the directori the file is ?	03:32
SlyGuy	they installed with the drivers	03:32
xsquared	FusionXN1, go sudo ./<file>	03:32
=== p47 [n=p47@201.152.33.11] has joined #ubuntu
bensr20det	Can anyone help me with frostwire??	03:32
eyequeue	FusionXN1, is the file an executable, binary or script or something?	03:32
FusionXN1	.run	03:32
=== nate_ [n=nate@70-97-208-61.dsl2.elk.ca.frontiernet.net] has joined #ubuntu
FusionXN1	its quake4-linux-1.2.1.x86.run	03:32
Ropechoborra	How do i install my scanner ? (its a multifunction printer)	03:32
=== jadams [n=jadams@cs6625119-172.bham.res.rr.com] has joined #ubuntu
synic	FusionXN1: sudo ./something.run	03:32
eyequeue	FusionXN1, do this: "file quake4-linux-1.2.1.x86.run"	03:33
eyequeue	FusionXN1, tell us what "file" say it is	03:33
synic	FusionXN1: chmod +x file.run && sudo ./file.run	03:33
ardchoille	SlyGuy: ok, what happened when you changed the "nv" to "nvidia" in xorg.conf and then either restarted X or rebooted?	03:33
FusionXN1	Bourne shell script test executable	03:33
SlyGuy	xfailed	03:33
whaley	eyequeue: my apologies for asking that question earlier.... i was having a newbie moment, it turns out that my gnome settings were pointing to the old gnome 'human theme' while the new ones were pointing to the new 'human theme'	03:33
FusionXN1	text*	03:33
=== kenny [n=kenny@pool-71-108-103-4.lsanca.dsl-w.verizon.net] has joined #ubuntu
eyequeue	FusionXN1, sh ./quake4-linux-1.2.1.x86.run	03:33
=== whaley shrugs
eyequeue	FusionXN1, if you trust it	03:34
ubufan	how can I remove the "admin powers" of sudo users ????	03:34
kenny	hell yeah!! my cpu went form 300 to 450	03:34
ardchoille	SlyGuy: What did the error message say? You got a blue screen with a grey box?	03:34
FusionXN1	thanks	03:34
=== gorgeousjunkie [n=danieldo@84.203.146.181] has joined #ubuntu
eyequeue	whaley, ahhhh	03:34
=== Ash-Fox [i=UNKNOWN@efx159.neoplus.adsl.tpnet.pl] has joined #Ubuntu
SlyGuy	yeah a typical ascii box	03:34
mammoth	ardchoille. Hi, plse help	03:34
eyequeue	ubufan, sudo visudo	03:34
=== rob [i=Robert@freenode/staff/ubuntu.member.rob] has joined #ubuntu
gorgeousjunkie	i need to format a firewire drive. How do I do this?	03:34
Ropechoborra	How do i install my scanner ? (its a multifunction printer)	03:35
eyequeue	ubufan, man sudoers, first, if it's not obvious what to change	03:35
ubufan	and what ???	03:35
FusionXN1	eyequeue: it says "no permission to write"	03:35
Ropechoborra	FusionXN1 use sudo	03:35
ubufan	ok	03:35
=== rob [i=Robert@freenode/staff/ubuntu.member.rob] has joined #ubuntu
FusionXN1	thanks	03:35
mammoth	my mammoth 0.1.3 can't seach	03:35
eyequeue	FusionXN1, to write? what and where? any specifics?	03:35
FusionXN1	sudo sh ./quake4-linux-1.2.1.x86.run ?	03:35
gorgeousjunkie	i need to format a firewire drive. How do I do this?	03:35
Ropechoborra	i guess	03:35
FusionXN1	thanks it worked	03:35
=== ubufan [i=cptCaver@200-168-152-152.dsl.telesp.net.br] has left #ubuntu []
eyequeue	FusionXN1, you really want to run something untrusted as root? :(	03:36
FusionXN1	its ID SOFTWARE quake 4!	03:36
FusionXN1	its the linux exe for quake 4	03:36
=== dmk_uk [n=dmk@host81-156-26-95.range81-156.btcentralplus.com] has joined #ubuntu
=== deuce868 [n=deuce868@c-68-42-84-176.hsd1.mi.comcast.net] has joined #ubuntu
=== Tonren [n=mcantor@ool-45724cb6.dyn.optonline.net] has joined #ubuntu
=== llama32 [n=zak@077.a.001.beg.iprimus.net.au] has joined #ubuntu
eyequeue	FusionXN1, no idea, means nothing to me. hence untrusted	03:36
Ropechoborra	Noone knows how to install a scanner ? =(	03:36
=== lavi [n=lavi@221.226.103.136] has joined #ubuntu
eyequeue	FusionXN1, that's scanner software?	03:36
[Ex0r]	FusionXN1- did you do chmod a+x file.run	03:37
gorgeousjunkie	ropechoborra i think you have to use "sane" that's all I know	03:37
XVampireX	http://www.thenetw0rk.com/news/2004_02_linux.shtml	03:37
Ropechoborra	Yeap.. but Xsane says no devices found	03:37
FusionXN1	done :)	03:37
FusionXN1	OH X( Sys_Error: Couldn't load default.cfg - Check your working folder.	03:37
Asc	ropechoborra: what's the name of the scanner?	03:37
=== trafiq [n=trafiq@awl100.internetdsl.tpnet.pl] has joined #ubuntu
=== jn [n=jn@c-24-5-99-252.hsd1.ca.comcast.net] has joined #ubuntu
gorgeousjunkie	it could be there's no support for your scanner under linux. Check the manufacturer's website for a driver is all I can think of	03:38
trafiq	hi all	03:38
gorgeousjunkie	i need to format a firewire drive. How do I do this?	03:38
jn	hey what's the best way to mount ntfs for read/write in ubuntu.. is it ntfs-3g?	03:38
Ropechoborra	Asc its an Epson Stylus CX4700 Multifunction Printer.. The printer its already installed and working.. but it doesnt find the scanner =/	03:38
ardchoille	SlyGuy: I really don't know what to tell you. I have used that tutorial on about 30 different boxes and it's always worked for me.	03:38
jn	or another method?	03:38
=== deeghetal [n=brian@c-68-61-213-73.hsd1.mi.comcast.net] has joined #ubuntu
mammoth	plse helppppppppp	03:38
FusionXN1	ERROR: Couldn't load default.cfg - Check your working folder.	03:38
deeghetal	anyone know where the Firefox plugins folder is located on Ubuntu?	03:38
FusionXN1	What does that mean	03:38
kenny	is not not a flash 9 for firefox?	03:39
eyequeue	FusionXN1, "untrusted"?	03:39
gorgeousjunkie	ropechoborra check out qunu for help	03:39
Ropechoborra	deeghetal check in synaptic	03:39
FusionXN1	eye no i trush it	03:39
=== dmk_uk is now known as dmk
Ropechoborra	gorgeousjunkie whats qunu?	03:39
FusionXN1	http://zerowing.idsoftware.com/linux/quake4/#head-3c4c85364e6d592c51cab9450d4277ea49cd9119	03:39
mammoth	eyequeue ca you help?	03:39
=== dmk [n=dmk@host81-156-26-95.range81-156.btcentralplus.com] has left #ubuntu ["Ex-Chat"]
eyequeue	FusionXN1, the file you ran can be read with a text viewer, like less, or an editor	03:39
=== slavezero [n=rob@6532141hfc185.tampabay.res.rr.com] has joined #ubuntu
gorgeousjunkie	it's a oe on one free help resource	03:39
[Ex0r]	FusionXN1- did you get any errors ?	03:39
FusionXN1	Ex yes	03:40
eyequeue	mammoth, restate please?	03:40
ardchoille	deeghetal: I think it's in /usr/lib/firefox/plugins	03:40
SlyGuy	ardchoille: i used a different one to install the drivers the first time	03:40
FusionXN1	ERROR: Couldn't load default.cfg - Check your working folder.	03:40
slavezero	apt-get not connecting to a damn thing can anyone tell me why.	03:40
=== Atholas [n=atholas@unaffiliated/Atholas] has joined #Ubuntu
[Ex0r]	it's looking for default.cfg	03:40
SlyGuy	that one has never worked for mew	03:40
bensr20det	Hey everyone. I am having problems with frostwire. I downloaded the .deb file from their website and ran it. It says that it was installed. When I click on it from the applications menu nothing at all happens. I ran "sudo apt-get install sun-java5-bin" and it says that I have the newest package. Any help would be great	03:40
eyequeue	mammoth, i can't find your original question	03:40
=== elamericano [n=elameric@mail.atheros.com] has left #ubuntu ["Gotta]
jn	what is the best method to achieve reading/writing of ntfs in linux	03:40
gorgeousjunkie	i need to format a firewire drive. How do I do this?	03:40
mammoth	I have a problem stating my mammoth 0.1.3. i.e can't search	03:41
eyequeue	!fuse > jn	03:41
deeghetal	ardchoille: yep, thanks	03:41
=== mnvl [n=mnvl@host86-129-186-96.range86-129.btcentralplus.com] has joined #ubuntu
ardchoille	You're welcome :)	03:41
eyequeue	mammoth, what is mammoth?	03:41
=== malachi_ [n=Malachi@207-119-45-215.dyn.centurytel.net] has joined #ubuntu
jn	eyequeue: is that method reliable?	03:41
kenny	hell yeah	03:41
kenny	i got sound now	03:41
eyequeue	jn, no clue, as i said earlier, i don't do ms things	03:41
Ropechoborra	gorgeousjunkie and where can i find qunu ?	03:41
mnvl	why is the faq over https?	03:42
kenny	u guys know a good way to bend pins on a cpu back?	03:42
[Ex0r]	kenny- yeah, get a new one	03:42
Asc	ropechoborra: try here: http://www.avasys.jp/english/linux_e/dl_spc.html	03:42
=== tulio [n=tulio@200.163.16.132] has joined #ubuntu
slavezero	kenny: razor blade	03:42
eyequeue	jn, it's what people send as a reply to that in here, but it comes with that caution right in it	03:42
Ropechoborra	Ty	03:42
mammoth	shareware like kazaa	03:42
[Ex0r]	most of them will probably break bending back	03:42
kenny	thanx slave	03:42
=== bartzila [n=bartzila@HSE-Montreal-ppp3473513.sympatico.ca] has joined #ubuntu
=== tulio is now known as tuliomgui
eyequeue	mnvl, it's on the wiki	03:42
kenny	i happent o like using the old stuff	03:42
=== \|rt\|_ [n=realthin@c-66-31-5-173.hsd1.nh.comcast.net] has joined #ubuntu
Atholas	Hi. I have Ubuntu 6.06 installed on ext3, and corrupted the partition. I had to run e2fsck to fix it. It boots properly now, but for some reason the root partition is mounted as read-only.	03:42
kenny	but i cant really go ask around for a razor blade	03:42
tuliomgui	anybody here have ever used RxTx??	03:42
eyequeue	mnvl, wiki means passwords, means https	03:42
[Ex0r]	kenny- I didn't say it was a matter of being old or not, it's a matter of the pins being compromised	03:43
mnvl	k just wondered	03:43
deeghetal	is there a way to become super-user without being in terminal? i need to copy some files.	03:43
slavezero	kenny: it is the only thing i have found to strong and small enough	03:43
Atholas	Is there anyway I can mount it so that it will be mounted read-write again?	03:43
kenny	as long as they are all there its fine	03:43
kenny	ive done this so many times	03:43
FusionXN1	How can i use file browser to move files from the CD ROM to a fold i dont have permission - theres like 20 of them	03:43
[Ex0r]	Than why did you ask ?	03:43
slavezero	any one know why my apt is not working	03:43
=== bensr20det [n=ben@74.138.128.31] has left #ubuntu []
deeghetal	slavezero: what architecture do you have	03:44
eyequeue	!notworking	03:44
ubotu	I know nothing about notworking - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	03:44
FusionXN1	slavezero: what did you type?	03:44
slavezero	x86	03:44
slavezero	dapper	03:44
eyequeue	!doesnt work	03:44
ubotu	I know nothing about doesnt work - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	03:44
FusionXN1	eyequeue: ?	03:44
sproingie	how do you tell the bot to forward to another factoid?	03:44
kenny	lol	03:44
kenny	im using a pci slot cover	03:44
eyequeue	sproingie, foo is also bar, i believe	03:44
Asc	Fusion: starting nautilus with sudo should work...	03:45
gorgeousjunkie	i need to format a firewire drive. How do I do this?	03:45
eyequeue	!ubotu	03:45
ubotu	I am ubotu, all-knowing infobot. You can browse my brain at http://bots.ubuntulinux.nl Usage info: http://wiki.ubuntu.com/UbotuUsage	03:45
lophyte	anyone know of any easy video conversion software?	03:45
sproingie	eyequeue: naw, that just adds the text to the end of the factoid	03:45
FusionXN1	Asc how	03:45
sproingie	eyequeue: i want notwork -> doesn't work	03:45
deeghetal	i have to copy two files from a folder in my home directory to /usr/lib/firefox/plugins and it is a restricted folder can someone help me with the terminal commands or tell me how to do this on the desktop?	03:45
eyequeue	sproingie, the last url there	03:45
Asc	Fusion: open an console and 'sudo nautilus'. I'll test it if you wait a second.	03:45
eyequeue	sproingie, i read it last night, but the chemicals prevent my brain being able to recall it	03:46
gorgeousjunkie	deeghetal change the permissionsn the folder is all i can think of	03:46
sproingie	ah, alias	03:46
deeghetal	i can't they're grayed out.	03:46
=== xsquared [n=xsquared@dsl-58-6-121-220.qld.westnet.com.au] has left #ubuntu ["Leaving"]
=== NineTeen67Comet [n=justin@040M16.oasis.mediatti.net] has left #ubuntu []
Asc	<FusionXN1>: yes, it works	03:46
ardchoille	deeghetal: sudo cp /path/file /usr/lib/firefox/plugins	03:46
deeghetal	actually a link to a manual on terminal commands would be even more helpful. lol	03:46
FusionXN1	Asc thanks	03:46
=== bobbyyu [n=bobbyyu@HSE-Toronto-ppp306466.sympatico.ca] has joined #ubuntu
sproingie	oh, just plain "work" also, uh, works.	03:47
gorgeousjunkie	one sec deeghetal	03:47
Asc	Just be careful not to accidentally destroy your file system, da?	03:47
ardchoille	gorgeousjunkie: That's really not a good practice	03:47
eyequeue	deeghetal, apt-get search rute	03:47
=== seshomaru [n=kitty@60.63.160.202] has joined #ubuntu
bobbyyu	I have a problem with accessing my Samba shares	03:47
FusionXN1	Quake 4 here we come	03:47
bobbyyu	Windows says it's inaccessible	03:47
=== tom__ [n=tom@24-196-158-110.dhcp.fdul.wi.charter.com] has joined #ubuntu
FusionXN1	Asc: im moving quake 4 base packs form dvd to the q4base folder	03:47
deeghetal	ardchoille: thanks that worked.	03:47
tuliomgui	anybody here have ever used RxTx??	03:47
synic	eyequeue: don't think rute's in the repos.	03:47
tom__	woot	03:47
ardchoille	deeghetal: You're welcome :)	03:47
=== Viper550 [n=viper550@d57-121-167.home.cgocable.net] has joined #ubuntu
seshomaru	hello , I would like someone to help me configure my firewall - firestarter	03:48
eyequeue	deeghetal, apt-cache search rute ...... rutebook - Linux: Rute User's Tutorial and Exposition, an online book	03:48
Viper550	I think I finally finished my theme for Edgy!	03:48
tom__	Ubuntu owns, i just converted to ubuntu	03:48
gorgeousjunkie	http://www.lifehacker.com/software/free-information/unix-cheat-sheet-186640.php	03:48
eyequeue	!info rutebook	03:48
ubotu	rutebook: Linux: Rute User's Tutorial and Exposition, an online book. In repository multiverse, is optional. Version 1.0-1 (dapper), package size 5468 kB, installed size 8264 kB	03:48
FusionXN1	time_ same	03:48
tuliomgui	!rxtx	03:48
ubotu	I know nothing about rxtx - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	03:48
gorgeousjunkie	check that out deeghetal	03:48
eyequeue	synic, an, multiverse	03:48
Viper550	!gnome-themes	03:48
kenny	there are so many bent pins.....	03:48
ubotu	I know nothing about gnome-themes - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	03:48
deeghetal	eyequeue: thanks	03:48
ardchoille	synic , eyequeue: http://rute.2038bug.com/index.html.gz	03:48
eyequeue	synic, ah	03:48
kenny	do u guys know a good app to play mp3s?	03:48
eyequeue	ardchoille, there too :) the package puts it under /usr/share/doc/	03:49
Zambezi	I need to speak online with a friend. I have Linux, he uses Windows. Which application is the best?	03:49
FusionXN1	AmaroK	03:49
synic	kenny: depends on what exactly you want to do.	03:49
tuliomgui	kenny: amarok	03:49
tom__	Kenny: trty amarok	03:49
=== fivre [n=Five@slip-12-64-0-104.mis.prserv.net] has joined #ubuntu
kenny	thanx guys	03:49
deeghetal	zambezi: gaim	03:49
[Ex0r]	Zambezi- gaim	03:49
eyequeue	Zambezi, "best"? gaim is popular though	03:49
kenny	u guys have been a lot of help	03:49
=== NCLife [i=NCLife@200.95.158.108.cableonline.com.mx] has joined #ubuntu
ardchoille	eyequeue: Yeah, but the rute webpage says version 1.0.0 ubotu says teh repos has 1.0.	03:49
ardchoille	1	03:49
eyequeue	Zambezi, i use it with gtalk accounts	03:49
tuliomgui	i prefer kopete	03:49
Zambezi	deeghetal, [Ex0r] eyequeue Is the voice good there?	03:49
bobbyyu	Any ideas?	03:49
[Ex0r]	Zambezi- Doesn't support voice as far as I know.	03:50
seshomaru	hello , can anyone please help me firewall configuration?	03:50
slavezero	Err http://archive.ubuntu.com dapper/universe libgdk-pixbuf2 0.22.0-11	03:50
slavezero	Connection failed [IP: 82.211.81.182 80]	03:50
slavezero	any ideas on why it is doing this.	03:50
=== ThunderStruck [n=ThunderS@ubuntu/member/gnomefreak] has joined #ubuntu
=== zcat[1] [n=zcat@60-234-226-80.bitstream.orcon.net.nz] has joined #ubuntu
tuliomgui	seshomaru: i can try	03:50
deeghetal	zambezi if you want voice find Ekiga Softphone	03:50
seshomaru	i think it should be simple but.....	03:50
eyequeue	Zambezi, straight gaim doesn't do voice, though there;s some gaim variant that does	03:50
tom__	slavezero mirror down	03:50
seshomaru	tuliomgui, thank you	03:50
slavezero	ok good thought it was me	03:50
seshomaru	tuliomgui, i just downloaded firestarter	03:50
slavezero	tom_: thanks	03:51
seshomaru	its blocking IRC	03:51
seshomaru	and my apache website.,...	03:51
tom__	Slavezero: try putting us.archive.ubuntu.com	03:51
danf_1979	after compiling openssh, how may I start the service? there is no ssh entry in /etc/init.d/ and the compile process finished without errors.. any one knows?	03:51
eyequeue	Zambezi, gaim-*, but it's not in ubuntu and not compatible with what i use, gaom-encryption	03:51
seshomaru	down know how to unbliock...	03:51
zcat[1]	help!! http://paste.ubuntu-nl.org/19135	03:51
[Ex0r]	danf_1979- it starts automatically after installing it	03:51
tuliomgui	seshomaru: =/	03:51
[Ex0r]	danf_1979- but I believe you can do sshd	03:51
deeghetal	please god let flash work now	03:51
seshomaru	=/ ?	03:51
kenny	is there a flash 9 for linux?	03:51
tom__	yes kenny	03:52
[Ex0r]	Don't think so	03:52
deeghetal	aww it doesn't work	03:52
tuliomgui	seshomaru: did you saw the rules in the firestarter??	03:52
=== kapputu [n=sg47@c-24-6-48-243.hsd1.ca.comcast.net] has joined #ubuntu
[Ex0r]	see*	03:52
kenny	i searched the macromedia site and was unable to find one	03:52
tom__	Deeghetal: get easyubuntu, itll make flash work fo ru	03:52
tuliomgui	deeghetal: whats the problem??	03:52
gorgeousjunkie	i second that deeghetal	03:52
kapputu	Hi, I have Xubuntu, how do I install GNOME? Which package in apt?	03:52
deeghetal	the problem is i have x86_64 so nothing works	03:52
seshomaru	tuliomgui, no , where?	03:52
=== talisein [n=talisein@c-67-160-253-166.hsd1.ca.comcast.net] has joined #ubuntu
seshomaru	tuliomgui, oh , "add rules"?	03:53
tuliomgui	seshomaru: start the firestarter and go to politics	03:53
zcat[1]	Seveas: still having a lot of trouble getting libdvdcss to work here. any suggestions?	03:53
kapputu	and how do I get the address bar in Nautilus under XFCE?	03:53
seshomaru	tuliomgui, yes yes	03:53
Viper550	kapputu: sudo apt-get install ubuntu-desktop or sudo apt-get install gnome	03:53
Viper550	!gnome	03:53
ubotu	gnome is a project that provides two things: The GNOME desktop environment, an intuitive and attractive desktop for end-users, users, and the GNOME development platform, an extensive framework for building applications that integrate into the rest of the desktop.	03:53
deeghetal	if there is no 64 bit version of flash that means i'll never get it working, right?	03:53
tuliomgui	seshomaru: see he rules there	03:53
Viper550	!ubuntu-desktop	03:53
ubotu	k/ed/x/ubuntu-desktop is a metapackage. It depends upon other packages and brings them in; you can safely remove it, but it is recommended that you re-install it when upgrading.	03:53
seshomaru	tuliomgui, but i cant set the rules right...	03:53
tuliomgui	seshomaru: maybe youll find something	03:53
=== jimcooncat [n=jim@pool-72-65-107-194.ptldme.east.verizon.net] has joined #ubuntu
tuliomgui	seshomaru: why not?	03:53
seshomaru	tul - how do i set it to unblock IRC?	03:53
=== unkn0wn2u [n=phpsmall@216.170.30.37] has joined #ubuntu
kapputu	how do I get the address bar in Nautilus in XFCE?	03:53
tuliomgui	deeghetal: whats the problem with flash??	03:54
=== Cntryboy [n=cd@host-216-78-30-207.tys.bellsouth.net] has joined #ubuntu
=== xicox [n=xicox@Talca2.ctrmax.cl] has joined #ubuntu
deeghetal	i have a 64 bit version of ubuntu and flash is only 32-bit	03:54
nosklo	I need help to configure pam, the pam_group module, to insert users in audio group automatically on login. Does somebody has any experience? I have tried everything I know and nothing till now.	03:54
=== kb3nnj [n=theblue@c-69-140-159-42.hsd1.md.comcast.net] has joined #ubuntu
tuliomgui	you want it to go 64 too?	03:54
FusionXN1	WOW Quake 4 runs better then windows!	03:54
ardchoille	kapputu: Open nautilus, go to Edit -> Preferences, then go to the Behavior tab and check "Always use text-entry location bar"	03:54
deeghetal	well i can't install it because it's not made for my architecture	03:54
FusionXN1	IN LINUX! IM happy	03:54
tuliomgui	or the flash player does play anything?	03:54
Cntryboy	Has anyone here installed extended pref. for gaim?	03:55
deeghetal	it doesn't even install to firefox	03:55
tuliomgui	dawmn	03:55
=== xicox [n=xicox@Talca2.ctrmax.cl] has left #ubuntu ["Abandonando"]
tuliomgui	wait	03:55
deeghetal	i wish there was a way to fake 32-bit.. windows does it.	03:55
kapputu	ok, I'm sure this is a FAQ. How do I install stuff for playing music, watching DVDs?	03:55
kenny	so wheres the flash 9?	03:55
gorgeousjunkie	the problem is deeghetal that that flash plugin version will not work under 64 bit ubuntu. You're gonna have to use that gplflash	03:55
tom__	lol deeghetal	03:55
deeghetal	gplflash?	03:56
deeghetal	i'll look for it	03:56
kenny	<kapputu>: vlc does a really good job at that	03:56
gorgeousjunkie	it doesn't do all flash just some I have a powerpc mac so I have the same problem	03:56
ChocoCid	kapputu : use add/remove programs	03:56
=== kb3nnj [n=theblue@c-69-140-159-42.hsd1.md.comcast.net] has left #ubuntu []
=== yoshiznit123 [n=sciyoshi@adsl-75-3-36-116.dsl.chcgil.sbcglobal.net] has left #ubuntu []
=== Melchor34 [n=Melchor3@OL7-88.fibertel.com.ar] has joined #ubuntu
Melchor34	Te invitamos a que conozcas algo muy interesante y divertido, eso si, no nos hacemos responsables si te crea adiccion... /!\ www.misecretito.com.ar /!\	03:56
kapputu	ChocoCid, which package in apt?	03:56
ChocoCid	just search for whatever you want	03:56
=== Melchor34 [n=Melchor3@OL7-88.fibertel.com.ar] has left #ubuntu []
ardchoille	!multimedia > kapputu	03:56
=== Monkey-D-Luffy [n=goofy800@cm10.epsilon225.maxonline.com.sg] has joined #ubuntu
ChocoCid	er... depends on what kind of files you want	03:56
kapputu	I'm not comfortable with GUI	03:56
=== Jenkens [n=j0okie@c-24-9-24-14.hsd1.co.comcast.net] has joined #ubuntu
Asc	FusionXN1: I had that same experience with proprietary WMV....	03:56
ChocoCid	ah	03:56
=== Renan_s2 [n=Renan@201.47.220.201] has joined #Ubuntu
ChocoCid	how... backwards >_>	03:56
Monkey-D-Luffy	hi	03:56
gorgeousjunkie	it's something liflash in synaptic	03:56
=== \|rt\|_ is now known as \|rt\|
=== Jenkens [n=j0okie@c-24-9-24-14.hsd1.co.comcast.net] has left #ubuntu []
ChocoCid	most people are more comfortable in GUI than commandline, i thought...	03:56
gorgeousjunkie	e, libflash	03:56
Monkey-D-Luffy	can anyone teach me how to install realplayer on ubuntu?	03:56
ChocoCid	interesting	03:56
kapputu	ChocoCid, GUI is irritating	03:57
seshomaru	tuliomgui, do u know how to set it to let IRC ?	03:57
=== navilon_ [n=navilon@ppp-70-128-93-85.dsl.hstntx.swbell.net] has joined #ubuntu
kenny	so wheres the flash 9/	03:57
ChocoCid	command line takes learning commands :P	03:57
kapputu	not always but for sys admin	03:57
ChocoCid	flash 9? uh...	03:57
ChocoCid	i wasn't aware there was one...	03:57
Monkey-D-Luffy	erm can anyone teach me how to install realplayer?	03:57
=== lukasz23 [n=lukasz23@gw-ww.telsten.com] has joined #ubuntu
kenny	someone asked if there was	03:57
tuliomgui	seshomaru: look if there is any rule in port 6666/6667/6668/6669/7000	03:57
kenny	<Monkey-D-Luffy> sudo apt-get install realplayer	03:57
=== __mikem [n=michael@201-106.124-70.tampabay.res.rr.com] has joined #ubuntu
ChocoCid	ah, not for linux	03:57
ChocoCid	:\	03:57
Monkey-D-Luffy	ok	03:57
Monkey-D-Luffy	thks	03:57
ChocoCid	it's 7.something for linux	03:58
ChocoCid	at least, from the adobe site	03:58
seshomaru	tuliomgui, there are no rules at all!	03:58
Renan_s2	Adobe is working on Flash 9	03:58
seshomaru	tuliomgui, should i add?	03:58
kenny	alright	03:58
jimcooncat	is there a repository with ruby-1.8.4?	03:58
kapputu	ubotu gave me a broken link	03:58
deeghetal	synaptic turns up an empty entry on libflash but i found gplflash on sourceforge	03:58
ubotu	I know nothing about gave me a broken link - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	03:58
jimcooncat	I wanna run radrails	03:58
kenny	any word on when they are done?	03:58
=== Stormx2 [n=Stormx2@host-87-240-137-127.hi-velocity.net] has joined #ubuntu
gorgeousjunkie	deeghetal one sec	03:58
Monkey-D-Luffy	it gives me some error	03:58
Asc	Monkey: try http://www.real.com/linux	03:59
kapputu	when I first started using Ubuntu in Sept 2004, there were 50 people in this room	03:59
=== drbreen [n=drbreen_@RAS24-017.UNI-MUENSTER.DE] has joined #ubuntu
Monkey-D-Luffy	i downloaded	03:59
kenny	hmmm	03:59
wastrel	s/room/channel/	03:59
kenny	now theres 780	03:59
Monkey-D-Luffy	but im not sure how to install	03:59
tuliomgui	seshomaru: wait	03:59
Asc	okay	03:59
=== Jenkens [n=j0okie@c-24-9-24-14.hsd1.co.comcast.net] has joined #ubuntu
seshomaru	tuliomgui, ok....	03:59
kapputu	wastrel, s/channel/room (ever heard of colloquial language?)	04:00
tuliomgui	in the politics tab	04:00
deeghetal	these things need to come with instructions. lol	04:00
deeghetal	oh it did	04:00
Asc	Monkey-D-Luffy: did you click the installation directions link?	04:00
tuliomgui	select something like "Outgoing politics"	04:00
Monkey-D-Luffy	year	04:00
Monkey-D-Luffy	yea	04:00
Monkey-D-Luffy	i tried	04:00
tuliomgui	did you see it?	04:00
tuliomgui	in edition	04:00
Monkey-D-Luffy	but it doesnt seem to work	04:00
=== Ademan [n=dan@h-69-3-234-229.snfccasy.dynamic.covad.net] has joined #ubuntu
wastrel	no, but i've heard of a syntax error in my regex :] ( s/room/room\// )	04:01
Asc	did it give you an error?	04:01
Monkey-D-Luffy	nope	04:01
Monkey-D-Luffy	when i type what they wanted me to	04:01
Monkey-D-Luffy	it just tells me wrong directory	04:01
lukasz23	hi sorry how i can remove all kubuntu-desktop	04:01
kapputu	the multimedia link you gave me was broken	04:01
tuliomgui	after going that option choose the first one that appears under that.	04:01
Asc	odd	04:01
deeghetal	ok i'm trying to install gplflash and this came at the end of the terminal after i ran ./configure "error: C++ compiler cannot create executables"	04:01
gorgeousjunkie	yeah it's ibflash	04:01
=== DarkAudit [n=bpack@morgantownwv-c2-68-69-153-74.pittpa.adelphia.net] has joined #ubuntu
=== elamericano [n=elameric@mail.atheros.com] has joined #ubuntu
gorgeousjunkie	https://wiki.ubuntu.com/FreeFlash?highlight=%28flash%29	04:02
synic	deeghetal: apt-get install build-essential	04:02
Monkey-D-Luffy	this is what it shows me	04:02
Monkey-D-Luffy	chmod: cannot access `RealPlayer10GOLD.bin': No such file or directory	04:02
synic	deeghetal: though why compile it? it's in the repos.	04:02
lukasz23	hi sorry how i can remove all kubuntu-desktop	04:02
lukasz23	help mi	04:02
tuliomgui	seshomaru: did you made it?	04:02
deeghetal	gorge: thanks i'm checking it out	04:02
Monkey-D-Luffy	erm	04:03
ardchoille	!repeat	04:03
ubotu	Don't feel ignored and repeat your question quickly, if nobody knows your answer, nobody will answer you. You can search https://help.ubuntu.com or http://wiki.ubuntu.com while you wait. Also see !patience	04:03
deeghetal	synic: oh lol	04:03
Monkey-D-Luffy	erm	04:03
tuliomgui	deeghetal: did you made it with the flash?	04:03
elamericano	synic, I got 256 colors in vim in an xchat terminal by :set t_Co=256	04:03
deeghetal	tulio: not yet	04:03
gorgeousjunkie	bye all	04:03
Monkey-D-Luffy	when i try to install realplayer	04:03
Monkey-D-Luffy	it gives me this error	04:03
Monkey-D-Luffy	chmod: cannot access `RealPlayer10GOLD.bin': No such file or directory	04:03
Asc	Monkey-D-Luffy: I've got it. Use 'sudo +x ./RealPlayer10GOLD.bin' then 'sudo ./RealPlayer10GOLD.bin'	04:03
=== gorgeousjunkie [n=danieldo@84.203.146.181] has left #ubuntu []
synic	elamericano: even in gnome-terminal ?	04:03
seshomaru	tuliomgui, i dont know how....	04:03
Monkey-D-Luffy	ok	04:03
Monkey-D-Luffy	ill try	04:03
Monkey-D-Luffy	thks :)	04:04
seshomaru	tuliomgui, in outbound or inbound ?	04:04
kapputu	how do I install the multimedia codecs? The link ubotu gave me is broken.	04:04
deeghetal	the gplflash in the repository isn't for x86_64	04:04
tuliomgui	deeghetal: in the download page of the flash player there was a link for 64bits wasnt there?	04:04
elamericano	synic, No, gnome-terminal was not compiled with 256 color support in Ubuntu	04:04
tuliomgui	seshomaru: outbound	04:04
ardchoille	Asc: That's not right	04:04
deeghetal	tulio: no	04:04
Monkey-D-Luffy	erm	04:04
seshomaru	ok	04:04
Asc	Monkey-D-Luffy: hum, if it gives you 'wrong file or directory', that could be a different problem	04:04
Monkey-D-Luffy	it gives another error	04:04
tuliomgui	select black list	04:04
Asc	ardchoille: it just worked for me....	04:04
=== Viper550 [n=main@d57-121-167.home.cgocable.net] has joined #ubuntu
Monkey-D-Luffy	sudo: +x: command not found	04:04
ardchoille	Asc: How could it, yu didn't include "chmod"	04:04
Monkey-D-Luffy	thats the error	04:04
Viper550	Hello everyone!	04:05
Asc	heh	04:05
kapputu	easyubuntu isn't on apt?	04:05
Monkey-D-Luffy	i tried chmod	04:05
FusionXN1	Anyone else got QUAKE 4 on linux?	04:05
Asc	Monkey-D-Luffy: replace 'sudo' with chmod	04:05
tuliomgui	i cant remember the page of the flash download	04:05
Monkey-D-Luffy	but it gives error	04:05
Monkey-D-Luffy	ok	04:05
ardchoille	Monkey-D-Luffy: Use sudo chmod u+x /path/to/RealPlayer10GOLD.bin	04:05
Monkey-D-Luffy	wait	04:05
Viper550	sudo chmod -x	04:05
seshomaru	tuliomgui, when making the rule i need to choose 'service' but there is no IRC , there is only HTTP, FTP,IMAP,etc...	04:05
synic	elamericano: sweet. That's definitely some good info. vim is my hero.	04:05
Asc	<--- bad tying	04:05
tuliomgui	seshomaru: select the black list and leave the rest empty	04:05
tuliomgui	it should work fine	04:05
kapputu	hmm people here hardly help anymore. Not like the old days.	04:06
=== abc [i=stiven00@222.125.5.176] has joined #ubuntu
deeghetal	bah gplflash doesn't work on 64 bit either	04:06
Monkey-D-Luffy	erm	04:06
Monkey-D-Luffy	chmod: cannot access `./RealPlayer10GOLD.bin': No such file or directory0	04:06
Viper550	Anyone want a nice usable preview of what to expect as a possible default theme for Edgy+1?	04:06
Asc	hmm. If the +x was the problem the first time, you might not need sudo on the second command either.	04:06
ardchoille	Monkey-D-Luffy: Looks like you need to find out where that file is and either cd to that dir or include the path	04:06
=== br1 [n=br1@user-142h17d.cable.mindspring.com] has joined #ubuntu
=== tom__ [n=tom@24-196-158-110.dhcp.fdul.wi.charter.com] has left #ubuntu ["Leaving"]
FusionXN1	Viper can i see a screenshot?	04:06
Monkey-D-Luffy	ok	04:06
elamericano	synic, now I just need some good 256 color themes. Somewhere I saw a script to convert gvim themes to 256 colors...	04:06
Asc	Monkey-D-Luffy: 'ls \| grep bin'. Are you in the same folder?	04:06
Viper550	https://wiki.ubuntu.com/Artwork/Incoming/Tropic	04:06
FusionXN1	That it?	04:06
Monkey-D-Luffy	i try entering the path	04:06
slavezero	no matter what i put in the sources apt just does not work wtf is going on here	04:06
FusionXN1	Thats smotth! Make a black one ill jump on it	04:07
FusionXN1	smooth*	04:07
Viper550	Black one?	04:07
FusionXN1	Ya	04:07
seshomaru	tuliomgui, made it , i will start the firewall now and see how it goes...	04:07
=== zeppelin_ [n=zeppelin@201.41.0.69] has joined #ubuntu
Viper550	This is Tropic, not Moonlight	04:07
FusionXN1	Is there a black one you have made?	04:07
ardchoille	slavezero: post your sources.list file to pastebin	04:07
=== ljlolel [n=ljlolel@dynamic-oit-vapornet-c-205.Princeton.EDU] has joined #ubuntu
abc	hi,erveryone	04:08
Viper550	Although, if you were good at editing in different colors, you could do it yourself if you wanted	04:08
=== JeromeChan [n=jeromech@cm169.delta57.maxonline.com.sg] has joined #Ubuntu
=== grigora [n=grigora@s232-170.resnet.ucla.edu] has joined #ubuntu
Monkey-D-Luffy	hi	04:08
=== userundefine [n=userunde@cpe-065-190-047-105.triad.res.rr.com] has joined #ubuntu
Monkey-D-Luffy	it gives this error	04:08
JeromeChan	heyo	04:08
Monkey-D-Luffy	chmod: cannot access `./home/clement/Desktop/RealPlayer10GOLD.bin': No such file or directory	04:08
tuliomgui	deeghetal: hey man did you tried to ask in #firefox at irc.mozilla.org ??	04:08
Renan_s2	ouch, this theme hurts my eyes! :/	04:08
deeghetal	i'll give it a shot tulio	04:08
synic	elamericano: if you find it, let me know	04:08
seshomaru	tuliomgui, i think it's working	04:08
tuliomgui	deeghetal: ok	04:08
abc	it's first time i come here	04:08
tuliomgui	seshomaru: =D	04:08
synic	elamericano: it would be worth recompiling gnome-terminal for me	04:09
seshomaru	tuliomgui, thanks	04:09
grigora	hi, I am trying to set up wireless and don't see WPA as an option. Does Ubuntu not support WPA? thanks	04:09
ardchoille	Monkey-D-Luffy: just go to the desktop and type the first few letters of the file and hit the tab key	04:09
tuliomgui	seshomaru: np...	04:09
seshomaru	tuliomgui, can you tell me how to allow people to view my apache website?	04:09
slavezero	ardchoille: pastebin?	04:09
seshomaru	tuliomgui, im behing a NAT	04:09
Monkey-D-Luffy	what do youi mean	04:09
tuliomgui	seshomaru: wich port is it running?	04:09
ardchoille	slavezero: http://paste.ubuntu-nl.org	04:09
seshomaru	tuliomgui, 80	04:09
JeromeChan	I've installed Ubuntu 6.0.6 onto my Acer laptop. How do I get rid of the tap touchpad for clicking feature?	04:10
tuliomgui	seshomaru: im not very good with this	04:10
=== abc [i=stiven00@222.125.5.176] has left #ubuntu []
Monkey-D-Luffy	is there such a thing to remote desktop from the internet??	04:10
synic	Monkey-D-Luffy: uh... sure, to a windows box	04:10
synic	Monkey-D-Luffy: what exactly are you looking for?	04:10
tuliomgui	seshomaru: what isnt working especifically?	04:10
slavezero	ardchoille: http://paste.ubuntu-nl.org/19137	04:10
ardchoille	Monkey-D-Luffy: cd /home/clement/Desktop then chmod u+x Real<tab>	04:10
Renan_s2	and to a Linux desktop with FreeNX	04:10
seshomaru	can't access it when the firewall is on	04:10
elamericano	synic, same site: http://frexx.de/xterm-256-notes/ There's 7 256 color themes and the converter.	04:10
=== Viper550 [n=main@d57-121-167.home.cgocable.net] has left #ubuntu ["Ex-Chat"]
Monkey-D-Luffy	ok	04:11
Monkey-D-Luffy	wait	04:11
seshomaru	tuliomgui, can't access it when firewall is on	04:11
=== fivre_ [n=Five@slip-12-65-42-20.mis.prserv.net] has joined #ubuntu
tuliomgui	seshomaru: when the firewall is off is it ok?	04:11
seshomaru	tuliomgui, yes	04:11
tuliomgui	let me see	04:11
tuliomgui	seshomaru: with the changes you made it still dont work?	04:12
ardchoille	slavezero: You ready to fix this? I have two commands for you	04:12
=== Morydd [n=morydd@c-67-167-199-142.hsd1.il.comcast.net] has joined #ubuntu
Monkey-D-Luffy	erm	04:12
synic	elamericano: awesome.	04:12
seshomaru	tuliomgui, yes	04:12
Monkey-D-Luffy	wonder if someone could help me by using remote desktop instead	04:12
elamericano	synic, it would be worth it for me too, but I read somewhere, that more of the xorg system has to be recompiled too. I don't know what's involved.	04:12
tuliomgui	it should be working	04:12
slavezero	ardchoille: yes please	04:12
grigora	does anyone know if ubuntu supports wpa encryption for wireless?	04:12
seshomaru	tuliomgui, it only works with 192.168.1.100 but not with my NAT IP	04:12
elamericano	Maybe Ubuntu should include it by default	04:12
synic	Monkey-D-Luffy: I don't think anyone would want to do that, because you won't learn anything.	04:13
=== Shadowline [n=shadowli@ppp-69-214-9-117.dsl.klmzmi.ameritech.net] has joined #ubuntu
Monkey-D-Luffy	hmm	04:13
seshomaru	tuliomgui, (i can access it from another machine on the subnet ,	04:13
=== linux2 [n=will@c-66-30-177-11.hsd1.ma.comcast.net] has joined #ubuntu
Monkey-D-Luffy	but at least i can watch	04:13
elamericano	A request for edgy, prehaps	04:13
ardchoille	slavezero: sudo cp /etc/apt/sources.list /etc/apt/sources.list.bak	04:13
seshomaru	tuliomgui, mistake , cannot access it from another machine...	04:13
=== Tracker1 [n=tech@71-36-229-253.ip.theroughnecks.com] has joined #ubuntu
ardchoille	slavezero: That's the first one, let me know when you want the second	04:14
Monkey-D-Luffy	vncviewer clement-desktop:0	04:14
synic	elamericano: I usually use ron when I have to edit remotely	04:14
slavezero	ardchoille: ok done	04:14
Monkey-D-Luffy	that is the	04:14
tuliomgui	seshomaru: did you tried to access from another machine using the ip or the host name??	04:14
synic	elamericano: the default colorscheme is hard to read	04:14
Monkey-D-Luffy	remote to my desktop	04:14
danf_1979	does ubuntu server comes with a ssh server installed?	04:14
tuliomgui	seshomaru: try using the host name	04:14
synic	but yeah, 256 colors would be awesome.	04:14
Tracker1	quick question, if I install edgy, when the release version comes out, will the automatic updater keep it up?	04:14
synic	Tracker1: yeah	04:14
Monkey-D-Luffy	erm	04:14
=== JeromeChan [n=jeromech@cm169.delta57.maxonline.com.sg] has left #Ubuntu []
Tracker1	synic, thanks.. :)	04:15
Monkey-D-Luffy	any1 trying to remote my comp?	04:15
Monkey-D-Luffy	if no...	04:15
Zambezi	Can anybody help me with teamspeak? It follow the instructions but it says command not found.	04:15
seshomaru	tuliomgui, doesnt wotk ,even from this machine....	04:15
Morydd	I'm trying to install ubuntu on an older laptop. (750MHz, 64M RAM) however I don't get anything after the splash screen says "configuring X"	04:15
Tracker1	installing now, wanted a newer version of kino than comes with dapper.	04:15
ardchoille	slavezero: Type this exactly as it is: sudo sed -i 's/us.archive/archive/g' /etc/apt/sources.list	04:15
Monkey-D-Luffy	aww man im still having trouble in installing realplayer	04:15
tuliomgui	seshomaru: is the server up?	04:15
seshomaru	tuliomgui, ,when firewall is off then everything is fine	04:15
=== KCOOL [n=CHICKEN@CPE0010b5e5fded-CM000f9f7c3c6c.cpe.net.cable.rogers.com] has left #ubuntu ["Leaving"]
ardchoille	slavezero: Then do: sudo apt-get update	04:15
seshomaru	tuliomgui, so server must be up	04:16
tuliomgui	seshomaru: you cant access even from the server machine?	04:16
slavezero	ardchoille: no luck still the same	04:16
seshomaru	tuliomgui, yes	04:16
=== davey_ [n=david@c-67-182-44-11.hsd1.ca.comcast.net] has joined #ubuntu
tuliomgui	seshomaru: just a minute, let me see my server	04:16
ardchoille	slavezero: hmm.. those sources work fast for me	04:16
seshomaru	tuliomgui, sorry , i CAN acess from server machine	04:16
davey_	can wine be run with out 3d hardware selection. I can't get it	04:16
Monkey-D-Luffy	erm anyone have a guild i can follow to install realplayer ubuntu??	04:16
elamericano	synic, what's ron? I tried to google it, but I got too many rons ;-)	04:16
=== weo [n=weo@88.134.178.39] has joined #ubuntu
=== TrevorP [n=trevorp@137.166.127.86] has joined #ubuntu
=== nathanj [i=nathanj@creep.bur.st] has joined #ubuntu
synic	elamericano: oh... :colorscheme ron	04:17
synic	elamericano: it's at least bearable :)	04:17
=== lukasz23 [n=lukasz23@gw-ww.telsten.com] has joined #ubuntu
kapputu	totem-xine or totem-gstreamer??	04:17
Asc	Monkey: I'd be willing to do it remotely, but it's not very good security practice on your part to let me :p	04:17
=== poupqyre [n=francisc@adsl-18-96-45.sdf.bellsouth.net] has joined #ubuntu
Monkey-D-Luffy	its okay	04:17
Monkey-D-Luffy	iv got nothing to lose	04:17
=== fivre_ [n=Five@slip-12-65-42-20.mis.prserv.net] has joined #ubuntu
Monkey-D-Luffy	:)	04:17
Asc	Monkey-D-Luffy: I'll try to find one	04:17
ardchoille	slavezero: The first command I gave you made a backup, you can leave the sources.list as is or change it back. I can help change it back if you want.	04:17
Monkey-D-Luffy	thks	04:17
tuliomgui	seshomaru: so, try to access from another machine in the net but using the host name not the ip address	04:17
Monkey-D-Luffy	so i have to give you the command to enter right?	04:17
=== Viper550 [n=main@d57-121-167.home.cgocable.net] has joined #ubuntu
elamericano	synic, thanks for the tip. Yes, pink and teal are hard to bear. I'd rather use black and white.	04:18
ChocoCid	well, he knows you're doing it	04:18
ChocoCid	so if he sees you doing something bad he can pull the cord :P	04:18
Asc	Monkey: Are you behind NAT?	04:18
Viper550	What about Pink and Teal?	04:18
slavezero	ardchoille: i know how to do that thanks for the help though i just cant see why this does not work it was then it wasn't	04:18
poupqyre	could anyone help me figure out which driver my (working) wireless card is actually using?	04:18
Tracker1	mental note: apt-get upgrade dist == bad idea.. :)	04:18
fab31	do someone know how to apt-get build something in a 32bits chroot ?	04:18
Monkey-D-Luffy	vncviewer clement-desktop;0	04:18
fab31	(I want to make FreeNX working on my amd64)	04:18
=== turbobot [n=turbobot@Toronto-HSE-ppp3716544.sympatico.ca] has joined #ubuntu
Monkey-D-Luffy	thats the command	04:18
Monkey-D-Luffy	what is nat?	04:18
-turbobot:#ubuntu- http://progressivenazism.blogspot.com/		04:19
tuliomgui	deeghetal: any result:	04:19
tuliomgui	??	04:19
ardchoille	slavezero: Ok.. I'm curious too	04:19
-turbobot:#ubuntu- http://progressivenazism.blogspot.com/		04:19
=== tocool4u [n=tocool4u@24.115.33.180.res-cmts.brd.ptd.net] has joined #ubuntu
synic	turbobot: go away.	04:19
seshomaru	tuliomgui, how do i know my host name?	04:19
Asc	Monkney: network address translation. A router, for example.	04:19
Jeruvy	buybye	04:19
eyequeue	fab31, enter thye chroot, then as user, apt-get -b source foo	04:19
deeghetal	tulio: no they say flash doesn't work on 64 bit too	04:19
Monkey-D-Luffy	i have a router	04:19
=== tocool4u [n=tocool4u@24.115.33.180.res-cmts.brd.ptd.net] has left #ubuntu ["Leaving"]
Monkey-D-Luffy	so...	04:19
tuliomgui	deeghetal: =/	04:19
eyequeue	fab31, will that do it?	04:19
kapputu	totem-xine or totem-gstreamer??	04:19
Monkey-D-Luffy	what do i do next?	04:20
=== roving_p1ole [n=Harper@72-254-127-152.client.stsn.net] has joined #ubuntu
tuliomgui	seshomaru: just a moment	04:20
fab31	eyequeue: I don't think so, I'll try	04:20
synic	deeghetal: there are ways to get flash+firefox on amd64	04:20
Asc	Monkey: that will make it more difficult. To connect from here, I'd need your IP and for you to forward the port used by vncviewer to your computer	04:20
synic	deeghetal: one sec.	04:20
eyequeue	fab31, oops, i forgot, first do sudp apt-get build-dep foo	04:20
Monkey-D-Luffy	what port do you need me to forward?	04:20
=== jsubl2 [n=jsubl2@72.48.95.220] has joined #ubuntu
Monkey-D-Luffy	ill open it	04:20
fab31	eyequeue: I knew this one, do you just cd the chroot or do you chroot() ? :P	04:21
fab31	(is ther apt-* in the chroot ?!)	04:21
eyequeue	fab31, i'm not a big chroot guy, but not the cd, you have to first chroot and then cd to whereever	04:21
=== Finite [n=user@adsl-69-110-148-45.dsl.pltn13.pacbell.net] has joined #ubuntu
Monkey-D-Luffy	222.164.225.10	04:21
fab31	k	04:21
synic	deeghetal: http://doc.gwos.org/index.php/Firefox64_and_plugins	04:21
Monkey-D-Luffy	thats my ip	04:21
=== spiderworm [n=spiderwo@blender/support/spiderworm] has joined #ubuntu
Monkey-D-Luffy	what port do you need me to forward	04:22
eyequeue	fab31, i would personally run bash in the chroot, then execute the commands from bash	04:22
spiderworm	anyone here having trouble doing smbmounts on ubuntu?	04:22
spiderworm	!smbmount	04:22
=== bala [n=bala@cm58.epsilon90.maxonline.com.sg] has joined #ubuntu
ubotu	I know nothing about smbmount - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	04:22
synic	deeghetal: it's basically the 32bit firefox... without a chroot.	04:22
eyequeue	fab31, does that sound reasonable to you?	04:22
tuliomgui	seshomaru: go system -> adminstration -> network ->Second Tab	04:22
=== sig [n=sig@unaffiliated/sig] has joined #ubuntu
spiderworm	~smbmnt	04:22
spiderworm	!smbmnt	04:22
ubotu	I know nothing about smbmnt - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	04:22
fab31	eyequeue: I see	04:22
Asc	Monkey-D-Luffy: /join #monkey_real	04:22
tuliomgui	seshomaru: you should see you hostname	04:22
=== grigora [n=grigora@s232-170.resnet.ucla.edu] has left #ubuntu []
=== yUSiyEEE_ [n=yusiye@adsl-75-26-157-40.dsl.irvnca.sbcglobal.net] has joined #ubuntu
tuliomgui	seshomaru: better go to console and type hostname	04:23
Asc	Monkey-D-Luffy: Let's do this somewhere where we won't spam the channel	04:23
tuliomgui	:P	04:23
bala	hello... can anybody tell me how to use packages in a cdrom from synaptic	04:23
Cntryboy	*** GTK+ 2.0 is required to build gaim-snpp; What is the name of the file im needing?	04:23
Monkey-D-Luffy	ok	04:23
Monkey-D-Luffy	i msged you	04:23
=== MeTa[AwAy] [n=sajt@3e44bad9.adsl.enternet.hu] has joined #ubuntu
fab31	eyequeue: in fact it's only something like /lib32 and /usr/lib32	04:24
=== deeghetal [n=brian@c-68-61-213-73.hsd1.mi.comcast.net] has left #ubuntu []
seshomaru	tuliomgui, found the hostname , should i put it in the browser in the other machine (XP)	04:24
Renan_s2	Cntryboy, libgtk2.0-dev	04:24
Renan_s2	or -devel, I don't recall	04:24
synic	Cntryboy: libgtk2.0-dev	04:24
=== roving_prole [n=Harper@c-71-199-16-110.hsd1.co.comcast.net] has joined #ubuntu
tuliomgui	seshomaru: yes	04:24
synic	d'oh.	04:24
Monkey-D-Luffy	did you see my msg asc?	04:24
Cntryboy	yah just found that sorry	04:24
Cntryboy	:)	04:24
Cntryboy	thx though u 2	04:24
=== EpP [n=evan@c-67-182-211-240.hsd1.ut.comcast.net] has joined #ubuntu
EpP	hi	04:24
seshomaru	tuliomgui, the host name is kitty , when i put it in the browser it sends me to some weird kittymail site...	04:25
Cntryboy	dang that file is huge for 2.1KB	04:25
Asc	Monkey-D-Luffy: try '/msg nickserv register [password] '... not sure that's the exact command	04:25
EpP	how can i get my Airport (not extreme) to work with WPA?	04:25
seshomaru	:-)	04:25
Monkey-D-Luffy	??	04:25
Monkey-D-Luffy	what is dat for?	04:25
=== runes [n=runes@70.52.192.45] has joined #ubuntu
synic	Monkey-D-Luffy: you can't pm on freenode without being registered.	04:25
poupqyre	anyone able to help me determine which driver my wireless card is using?	04:25
tuliomgui	seshomaru: so is it wrong?	04:26
ardchoille	Asc: That is the correct command, but you aren't identified so you won't be able to post text to Monkey-D-Luffy in a pm	04:26
seshomaru	yes	04:26
Asc	Monkey-D-Luffy: you can't msg me until you register, so you'll have to that or use '/join #real_monkey'	04:26
Monkey-D-Luffy	oh	04:26
tuliomgui	seshomaru: can you change the port of the apache?	04:26
Cntryboy	synic: why is it getting from Get:2 http://www.beerorkid.com dapper/main libcairo2 1.2.0-0ubuntu1quinn2 [438kB] , thats for xgl right?	04:26
=== Hotshot [n=chris@pD9E87A7A.dip.t-dialin.net] has joined #ubuntu
Asc	ardchoille: I'll look into it, but pm seems to be working for me	04:26
synic	Cntryboy: no, cairo is a gtk lib	04:26
Cntryboy	and I manually added beerorkid in sources.list	04:26
ardchoille	Asc: The you must have turned the filter off :)	04:27
Monkey-D-Luffy	im in	04:27
seshomaru	tuliomgui, don't know how	04:27
Asc	ard: probably. :p	04:27
tuliomgui	=/	04:27
Cntryboy	synic: but beerorkid is for xgl, I remember adding it in there	04:27
seshomaru	tuliomgui, this is my website http://60.63.160.202/rimon, can you see it?	04:27
Morydd	I'm trying to install ubuntu on an older laptop. (750MHz, 64M RAM) however I don't get anything after the splash screen says "configuring X" any ideas why it's hanging?	04:27
synic	Cntryboy: well, remove it. cairo will show up regardless, though.	04:27
EpP	how can i get my Airport (not extreme) to work with WPA?	04:27
=== CanadaGradeEh [n=cedric@206.116.234.254] has joined #ubuntu
synic	!repeat > EpP	04:28
CanadaGradeEh	Hey	04:28
Cntryboy	kk	04:28
CanadaGradeEh	I've got a question about dual boot	04:28
Cntryboy	maybe it's same thing	04:28
tuliomgui	seshomaru: timed out	04:28
CanadaGradeEh	Installing Windows: Does it work after I've installed Ubuntu first?	04:28
Versed	aI know it works with WEP.	04:28
ChocoCid	CanadaGradeEh : sure, but it screws with GRUB	04:28
ChocoCid	(the boot loader)	04:28
CanadaGradeEh	Yea, I know.	04:28
synic	CanadaGradeEh: sure.. but you'll have to re-install the bootloader to the mbr	04:28
CanadaGradeEh	That happend last time lol	04:29
=== GigaClon [n=gigaclon@n159s066.ntc.blacksburg.shentel.net] has joined #ubuntu
CanadaGradeEh	How can I do that?	04:29
synic	CanadaGradeEh: you can fix it with a livecd	04:29
seshomaru	tuliomgui, can i open the port on the firewall?	04:29
CanadaGradeEh	I don't have the Ubuntu LiveCD	04:29
ChocoCid	get it :P	04:29
synic	you'll need some sort of livecd	04:29
CanadaGradeEh	and I don't feel like downloading it	04:29
tuliomgui	seshomaru: it should be already opened	04:29
CanadaGradeEh	kthxs	04:29
ChocoCid	heh	04:29
ChocoCid	there should be a way to get it from within linux	04:29
Cntryboy	canadagradeEH: I installed windows first and it worked for me	04:29
ChocoCid	not sure if there is within windows though :\	04:29
=== five_laptop [n=fiveiron@74.137.134.5] has joined #ubuntu
ChocoCid	windows first usually works	04:29
tuliomgui	seshomaru: when you chose the black list you said: accept anything but the ones in the rules below	04:30
CanadaGradeEh	Blargity blarg!	04:30
CanadaGradeEh	lolz	04:30
tuliomgui	seshomaru: if there are no rules nothing should be blocking the port	04:30
seshomaru	tuliomgui, let me see	04:30
CanadaGradeEh	Hmmm....	04:30
CanadaGradeEh	HMMMMMMMM	04:30
=== wachunei [n=wachunei@101-38-89.adsl.terra.cl] has joined #ubuntu
Cntryboy	I tried linux first and grub couldn't find windows so I dunno	04:30
CanadaGradeEh	Ah the hell with it. I'll just completely partition and dual boot install	04:30
tuliomgui	seshomaru: but port 80 only the root should have access, or you should use something like low ports i dont know	04:30
Renan_s2	!info pan	04:30
ubotu	pan: A Newsreader based on GTK2, which looks like Forte Agent. In repository main, is optional. Version 0.14.2.91-4ubuntu6 (dapper), package size 450 kB, installed size 3608 kB	04:30
CanadaGradeEh	Stupid GRUB	04:30
Renan_s2	!info knode	04:30
tuliomgui	i have to look for it	04:30
ubotu	knode: KDE news reader. In repository universe, is optional. Version 4:3.5.2-0ubuntu6 (dapper), package size 1176 kB, installed size 2916 kB	04:30
CanadaGradeEh	err, completely format*	04:31
tuliomgui	!lowports	04:31
ubotu	I know nothing about lowports - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	04:31
lophyte	CanadaGradeEh: are you aware there's a #ubuntu-ca? :)	04:31
=== kalosaurusrex [n=aaron@c-24-20-77-5.hsd1.mn.comcast.net] has joined #ubuntu
Cntryboy	canadagradeeh: im sure someone knows how to get ur boot loader to function the way u have it, I just don't	04:31
seshomaru	tuliomgui, in "inbound traffic policy"?	04:31
tuliomgui	!low ports	04:31
ubotu	I know nothing about low ports - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	04:31
EpP	how do i get WPA working?	04:31
tuliomgui	seshomaru: no, outbound	04:31
tuliomgui	seshomaru: in inbound is there any rule?	04:31
CanadaGradeEh	!the dead body found by the lake. Why are you coming to me?	04:31
ubotu	I know nothing about the dead body found by the lake. Why are you coming to me? - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	04:31
seshomaru	tuliomgui, inbound - no rules	04:31
tuliomgui	seshomaru: good	04:31
=== Ghost_Printer [n=harold@S0106006067664bde.no.shawcable.net] has joined #ubuntu
=== job [n=job@pool-72-76-152-121.nwrknj.east.verizon.net] has joined #ubuntu
tuliomgui	outbound should also have no rules	04:32
Renan_s2	!VPN	04:32
ubotu	From more information on vpn please refer to https://wiki.ubuntu.com/Gaming_VPN_Using_PPTPD	04:32
=== ryanakca [n=ryan@unaffiliated/ryanakca] has joined #ubuntu
ryanakca	is there any reason NOT to upgrade to edgy? other than the fact that it's unstable?	04:32
runes	what group can I add myself to that is not ROOT but allows me to modify the /home files of other users on my machine	04:32
seshomaru	tuliomgui, outbound one rule "allow connection to host 192.168.1.100.80"	04:32
=== jsubl2 [n=jsubl2@72.48.95.220] has left #ubuntu ["Leaving"]
=== CanadaGradeEh [n=cedric@206.116.234.254] has left #ubuntu []
seshomaru	tuliomgui, that the server's IP (behind the router)	04:32
=== Krhis [n=Krhis@cblcpe-79-205.suite224.net] has joined #ubuntu
ardchoille	ryanakca: You need to ask yourself how much work you're willing to do if things keep breaking.	04:33
tuliomgui	seshomaru: in outbound are you using the first (black list) or the second (white list) choice in the radio button??	04:33
ryanakca	ardchoille: is it at the same level that dapper was in late february?	04:33
EpP	I tried to follow some tut on getting WPA to work. Now it doesnt show that eth1 is wireless, it shows it as wired in Networking	04:33
seshomaru	tuliomgui, second	04:33
=== frogzoo [n=frogzoo@202.155.165.25] has joined #ubuntu
ardchoille	ryanakca: If you're willing to test, then I say go for it. I would install it myself and help test it out if I had a spare box here.	04:34
tuliomgui	select the first one	04:34
tuliomgui	seshomaru: select the first one!	04:34
ardchoille	ryanakca: That I don't kinow	04:34
tuliomgui	and try again	04:34
tuliomgui	using the hostname	04:34
=== Ghost_Printer [n=harold@S0106006067664bde.no.shawcable.net] has left #ubuntu []
=== garryF [n=garry@adsl-71-148-53-102.dsl.chi2ca.sbcglobal.net] has joined #ubuntu
runes	is there away aside from using chown to allow a user full access to the /home files	04:34
seshomaru	tuliomgui, in the first there are no rules	04:34
ryanakca	ardchoille: sure I'm willing to test it :) That's pretty much the point of it... just as long as I can still kindof use it and it isn't unbootable	04:34
=== foka [n=foka@221.216.205.14] has joined #ubuntu
five_laptop	exit	04:35
ardchoille	ryanakca: Well, I know of some folks in this channel that use it so I'd say it's at least usable	04:35
five_laptop	woops	04:35
tuliomgui	seshomaru: let the fisrt one selected and try accesing the server from the XP machine again	04:35
ryanakca	ardchoille: ok	04:35
frogzoo	runes: create a group that allows access, or investigate posix urls	04:36
ryanakca	ardchoille: how do I get a list of the packages I currently have installed?	04:36
frogzoo	runes: create a group that allows access, or investigate posix acls	04:36
ryanakca	ardchoille: so that if it doesn't work.. I can allways pop in a kubuntu cd and run "sudo aptitude install `cat filename`"	04:36
runes	frogzoo, I tried adding myself to admin but it would not allow	04:36
ardchoille	ryanakca: I'm not familiar enough with dpkg to advise on that	04:36
runes	frogzoo, I tried adding myself to admin but it would not allow access	04:36
ryanakca	kk	04:36
=== bala [n=bala@cm58.epsilon90.maxonline.com.sg] has left #ubuntu ["Leaving"]
=== kalosaurusrex [n=aaron@c-24-20-77-5.hsd1.mn.comcast.net] has left #ubuntu []
=== torpedo\|dog [n=thetorpe@nr25-216-68-192-244.fuse.net] has joined #ubuntu
seshomaru	tuliomgui, .still doesnt work...	04:37
kaatil	i have a problem with installing eclipse... i found out that it depend on gij-4.0 not gij-4.1 (my is gil-4.1 atm)	04:37
frogzoo	runes: of course it didn't - only an admin can add you to admin	04:37
seshomaru	tuliomgui, thank you for your help,,,,i must go now...i will play with the setting later	04:37
tuliomgui	seshomaru: did you used the hostname?	04:37
spiderworm	hi all, i have an ubuntu samba box, windows and kde are able to connect to the shares, but i cannot connect from another ubuntu box via smbmount.... is anyone able to help me debug this?	04:37
tuliomgui	seshomaru: np!	04:37
tuliomgui	seshomaru: good luck!	04:37
tuliomgui	seshomaru: if you make it work tell me	04:38
runes	frogzoo, I was able to add myself to admin that worked that was the strange part	04:38
spiderworm	i have a list of errors generated by the samba server: http://pastebin.ca/104292	04:38
seshomaru	tuliomgui, thanks	04:38
seshomaru	byebye	04:38
kaatil	when i try install eclipse from Synatic package manager... it gave the error.. so i try to see what it depend on.. so it need gij-4.0(even though there is nothing for x86) athough only atm i have gij-4.1 installed atm	04:38
=== FeestBijtje [n=feestbij@86.83.64.173] has joined #ubuntu
runes	frogzoo, I used sys>admin>users and groups asked for admin password accepted	04:39
=== FeestBijtje [n=feestbij@86.83.64.173] has joined #ubuntu
FeestBijtje	!webcam	04:39
runes	frogzoo, I then changed my group to the admin group	04:39
ubotu	webcam is now easy to install on Linux; instructions at https://wiki.ubuntu.com/Webcam Supported cams: https://wiki.ubuntu.com/HardwareSupportComponentsMultimediaWebCameras	04:39
kaatil	!eclipse	04:39
ubotu	I know nothing about eclipse - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	04:39
spiderworm	!samba	04:39
ubotu	samba is the way to cooperate with Windows environments. Links with more info: https://wiki.ubuntu.com/MountWindowsSharesPermanently http://help.ubuntu.com/ubuntu/serverguide/C/windows-networking.html Samba can be administered via the web with SWAT	04:39
verbose	is there any way besides cygwin to use X11 forwarding over ssh to a windows client?	04:39
=== ReverendTrevore [n=tslocum@c-67-183-68-252.hsd1.wa.comcast.net] has joined #ubuntu
=== VicFirth [n=Drummer@203.220.85.207] has joined #ubuntu
FusionXN1	I need some help with my sound if someone can.... I have my USB mic, onboard audio (realtek ALC882) and HDA Intel..?! But HDA Intel is ASLA and it doesn't work	04:41
sproingie	nothing wrong with alsa that a few thermonuclear bombs can't fix	04:41
sarra_	Mmm, thermonuclear	04:41
ardchoille	hahaha	04:41
sarra_	!sli	04:42
ubotu	I know nothing about sli - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	04:42
FusionXN1	lol - well it dont work :(	04:42
sarra_	Has anyone done a Ubuntu 6.06 install on a machine running in SLI mode?	04:42
sproingie	getting the spdif coax AND headphones working at the same time is apparently beyond alsa's abilities	04:42
=== jimmygoon [n=jimmygoo@134.193.76.181] has joined #ubuntu
=== lhds [n=lhds@82.198.0.196.satgate.net] has joined #ubuntu
sproingie	this on the most common sound chipset on computers, a realtek	04:42
tuliomgui	anybody here ever used the rxtx??	04:42
lhds	whats the delete under linux?	04:42
jimmygoon	lhds - rm	04:42
sproingie	lhds: rm	04:42
trafiq	how to copy file in console?:>	04:42
FusionXN1	No one know?	04:43
jimmygoon	sproingie: i win :)	04:43
sproingie	trafiq: cp	04:43
trafiq	thx	04:43
trafiq	;p	04:43
tuliomgui	trafiq: cp	04:43
sproingie	jimmygoon: nyeah, got that one	04:43
ardchoille	trafiq: cp	04:43
jimmygoon	is this terminal 101	04:43
trafiq	thx2	04:43
trafiq	;)	04:43
ardchoille	!cli	04:43
ubotu	The linux terminal or command-line interface is very powerful. Open a terminal via applications -> accessories -> terminal (gnome) or kmenu -> system -> konsole (kde). Manuals: https://help.ubuntu.com/community/BasicCommands	04:43
jimmygoon	whoa... did you typing (excalamtion) cli do that? thats rad!	04:43
sproingie	ubuntu tackled the speed and polish issue, now time to make sound configuration not completely suck	04:43
ardchoille	yep	04:43
=== rxknmir [n=rxknmir@125.212.50.35] has joined #ubuntu
jimmygoon	where do I find a list of amazing commands like that (I've never really used IRC for more than popping in here and asking a question :P	04:44
ardchoille	!bot	04:44
ubotu	I am ubotu, all-knowing infobot. You can browse my brain at http://bots.ubuntulinux.nl Usage info: http://wiki.ubuntu.com/UbotuUsage	04:44
jimmygoon	gracias	04:44
sproingie	jimmygoon: ls /usr/bin. anything looks interesting, type man <command>	04:44
sproingie	jimmygoon: start with man intro	04:45
frogzoo	!anything	04:45
ubotu	I know nothing about anything - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	04:45
jimmygoon	sproinigie: I was regerring to IRC ubotu bot commands... but thanks ;)	04:45
FusionXN1	No one can help with my ALSA problem?	04:45
sproingie	oh heh	04:45
lhds	rm protected files all toguether what to use?	04:45
jimmygoon	rm -R	04:45
jimmygoon	or sudo rm -R (BE CAREFUL WITH THIS	04:45
lhds	rm -r .	04:45
ardchoille	jimmygoon: You can also do /query ubotu and do the searches there :)	04:45
lhds	?	04:45
jimmygoon	thanks	04:46
sproingie	there's no need to do . on linux	04:46
jimmygoon	lhds- that should work unless you are lackin permissions in which case you can prefix it with "sudo" but be careful, commands like that can be painful	04:46
sproingie	or modern versions of windows for that matter	04:46
frogzoo	rm -rf dirname	04:47
jimmygoon	what is the -f?	04:47
sproingie	jimmygoon: force	04:47
ardchoille	force	04:47
frogzoo	rm -rf * is a bad & unnecessary habit	04:47
ardchoille	true	04:47
sproingie	i prefer to use clicky file managers to delete whole trees just in case i make a mistake	04:47
=== pingoo [n=seraph@40-163.127-70.tampabay.res.rr.com] has joined #ubuntu
=== MistaED [n=mistaed@203-158-54-32.dyn.iinet.net.au] has joined #ubuntu
spiderworm	cd /; sudo rm -rf * is even worse :)	04:48
=== DBO [n=DBO@unaffiliated/dbo] has joined #ubuntu
=== jeffisageek [n=jeffisag@CPE-65-30-78-10.kc.res.rr.com] has joined #ubuntu
jimmygoon	spiderworm - don't even send that... chills :(	04:48
spiderworm	sorry	04:48
jimmygoon	lol I didn't mean you can't send it	04:48
=== spiderworm punishes self with electric drill
sproingie	no one seriously types that	04:48
jimmygoon	I just meant it too scary for my eyes	04:48
=== hintswen [n=hintswen@c211-28-41-87.sunsh1.vic.optusnet.com.au] has joined #ubuntu
jimmygoon	I did it once for fun cause I was gonna reload my pc anyways	04:49
sproingie	i once untarred a gentoo root filesystem into /, having forgotten to cd to the chroot	04:49
jimmygoon	:P wehn dapper came out	04:49
spiderworm	jimmygoon: cool, what happened?	04:49
sproingie	it wasnt a gentoo system i untarred it into either	04:49
spiderworm	was it able to delete the entire tree or did it error out?	04:49
phargle	probably get a few file in use errors	04:49
jimmygoon	everything kinda locked up after a long enough amount of time and when it booted back up it was completely useless	04:49
hintswen	I would like to put a picture(s) from the ubuntu website onto a t-shirt. Am I allowed to do this?	04:49
jimmygoon	nah- it completed just fine	04:49
=== josh_frca [n=renaldo@adsl-68-127-120-249.dsl.frsn02.pacbell.net] has joined #ubuntu
lhds	make dir stands for?	04:49
jimmygoon	and then i was like "sudo halt" and it was like "command: sudo not found"	04:50
spiderworm	LOL	04:50
jimmygoon	lhds- "mkdir" ?	04:50
synic	hintswen: heh, I would think it would be find if you state the source somewhere and you don't sell the shirt.	04:50
ardchoille	There are some things even root can't remove.	04:50
jimmygoon	lhds- "Make a directory with %s name"	04:50
josh_frca	hello all.. i have a question... i have linux and windows running together in this laptop... by default the system boots to linux... how do i change that?	04:50
synic	hintswen: er... fine.	04:50
[Ex0r]	Anyone here know a good place to buy reasonably priced PC cases ?	04:50
synic	[Ex0r] : newegg	04:50
josh_frca	ebags	04:50
ardchoille	[Ex0r] : newegg	04:50
hintswen	synic, doesn't even matter what the image is?	04:50
sproingie	newegg > *	04:50
jimmygoon	josh_frca - by editting grub and changing the default from ubuntu-> windows	04:51
spiderworm	josh_frca: you have to configure your bootloader... do you knwo which bootloader you're using? probably grub	04:51
[Ex0r]	checked there. They are all custom ones. I'm looking for ones that make the computer look like it's a factory made one	04:51
josh_frca	how do i edit grub... im sorry for even asking this	04:51
jimmygoon	if you trust yourself do this "sudo gedit /boot/grub/menu.lst" .. take a peak around	04:51
=== antoninus [n=anthony@88-107-40-24.dynamic.dsl.as9105.com] has joined #ubuntu
ardchoille	!grub	04:51
ubotu	grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto	04:51
=== PokerFacePenguin [n=joe@68.16.12.80] has joined #ubuntu
jimmygoon	that will allow you to "edit grub"(s menus)	04:51
eyequeue	josh_frca, /boot/grub/menu.list	04:51
synic	hintswen: not sure... I doubt the'd have any on there that aren't oss without naming the source.	04:51
=== seshomaru [n=kitty@60.63.160.202] has joined #ubuntu
seshomaru	tuliomgui, are you there?	04:52
tuliomgui	seshomaru: yes	04:52
DBO	I am getting errors while trying to burn a CD, the error varied from app to app, but k3b is just giving out a non-helpful IO error	04:52
ardchoille	eyequeue: s/menu.list/menu.lst/ ;)	04:52
seshomaru	can you try my website now?	04:52
=== FlufEBuny [n=jenn@adsl-215-145-130.aep.bellsouth.net] has joined #ubuntu
DBO	I have checked to make sure I am in the audio group and so on and so forth...	04:52
eyequeue	josh_frca, "sudo gedit" in front of that, if you didn't know	04:52
tuliomgui	seshomaru: sure	04:52
seshomaru	http://60.63.160.202/rimon	04:53
eyequeue	ardchoille, thanks	04:53
hintswen	synic, argh missed that line you said, can't really put the source on the tshirt lol	04:53
seshomaru	tuliomgui, i can now access it from XP	04:53
=== chris_ [n=chris@69.37.91.162] has joined #ubuntu
=== VitaminG [n=gregg@63.246.90.62] has joined #ubuntu
tuliomgui	seshomaru: it seems to be working fine...it should appear pictures from a baby?	04:53
chris_	i have a amd k6 laptop will ubuntu install?	04:53
frogzoo	DBO: tried a slower speed? maybe your burner doesn't like the media	04:53
=== Mudguts [n=mike@CPE00501827f82b-CM0014f85e43ac.cpe.net.cable.rogers.com] has joined #ubuntu
seshomaru	yes	04:53
seshomaru	tuliomgui, great thanks	04:53
DBO	frogzoo, yeah, tried it at 1x...	04:53
frogzoo	chris_: yes	04:53
synic	hintswen: sure you can	04:54
jimmygoon	seshomaru : works fine here too	04:54
tuliomgui	seshomaru: what did you do?	04:54
chris_	frogzoo? what intel x86?	04:54
synic	hintswen: small letters... http://ubuntulinux.org	04:54
frogzoo	DBO: try 50% - 1x I've found, can actually be too slow	04:54
DBO	frogzoo, ive tried nearly all speeds	04:54
seshomaru	tuliomgui, I added a rule in "inbound" allow service HTTP on port 80	04:54
davey_	can anyone help me get wine going on amd64 that refuses to work correctly even in chroot	04:54
DBO	frogzoo, using bonfire I get "Resource not found"	04:54
=== DavidJaq [n=Techno@72.24.150.161] has joined #ubuntu
frogzoo	chris_: best advice is install 386 & upgrade to 686 kernel	04:54
chris_	DBO good eveing :)	04:54
Mudguts	dude.. shoulda bought a dell.	04:55
tuliomgui	seshomaru: very good	04:55
seshomaru	tuliomgui, thanks for help ,byebye	04:55
DBO	frogzoo, and then to make the logical move... it then ejects the cd... very clearly finding the right drive...	04:55
chris_	frogzoo got a link for that download?	04:55
=== VitaminG [n=gregg@63.246.90.62] has left #ubuntu []
chris_	frogzoo PC (Intel x86) alternate install CD ?	04:55
DavidJaq	is there a tutorial for setting up a file server using the server install of Dapper?	04:55
frogzoo	DBO: nasty, checked the cables?	04:55
DBO	frogzoo, I can read from it...	04:56
=== fogos [n=marco@200.94.142.9] has joined #ubuntu
=== Marsmensch [n=daniel@dslb-084-056-070-039.pools.arcor-ip.net] has joined #ubuntu
=== Killeroid [n=Killeroi@pool-141-154-57-73.bos.east.verizon.net] has joined #ubuntu
frogzoo	DBO: I'm thinking a loose cable's a possibility	04:56
chris_	ubuntu-6.06-alternate-i386.iso frogzoo?	04:56
DBO	frogzoo, ok I just got it to work with sudo k3b... i dont think we have a perms issue though, I think its a k3b config issue	04:56
eyequeue	chris_, that is the one with the good text install on it too	04:57
=== Intacto [n=rstanyan@c-24-62-243-10.hsd1.nh.comcast.net] has joined #ubuntu
DBO	frogzoo, since it didnt burn with serp with sudo	04:57
wachunei	hi y'all i have a keyboard problem: i bought today a Genius KB-12e, it has some multimedia keys and it's connected via USB, the problem is when the keyboard is connected via USB the multimedia keys aren't recognized, i have an USB to PS/2 plug , and when it is connected this way, the multimedia keys works... what can I do for to get the multimedia key working using the usb plug? (i have gnome, ubuntu 6.06) (sorry for my bad english)	04:57
chris_	eyequeue binary? ... will work with amd k6 ?	04:57
=== Emilio_LnX [n=emilio@201.22.88.142.adsl.gvt.net.br] has joined #ubuntu
eyequeue	chris_, yes	04:58
hintswen	synic, http://ubuntulinux.org i can fit easily lol. But i hate putting writing on :( i'll live lol	04:58
chris_	eyequeue thanks installing on laptop and giving it away to my friend making him switch :)	04:58
frogzoo	wachunei: evrouter is one option	04:58
=== rxknmir [n=rxknmir@125.212.50.35] has joined #ubuntu
eyequeue	chris_, o installed on a friend's laptop with it, she's still happy months later, heh	04:58
synic	hintswen: I honestly doubt anyone would care if you don't put it on. If you don't sell the shirts, they are free advertising :)	04:58
eyequeue	chris_, i	04:58
wachunei	frogzoo: what's that?	04:59
jimmygoon	chris_ I promise to switch if you give me a laptop :D	04:59
=== Dravas [n=Dravas@ppp-70-224-203-175.dsl.applwi.ameritech.net] has joined #ubuntu
rxknmir	hey guys	04:59
=== nclife [i=sinclair@200.95.146.105.cableonline.com.mx] has joined #ubuntu
rxknmir	can i ask a question	04:59
DavidJaq	I'm trying to get a friend of mine set up with a file server using ubuntu, hoping she'll be happy with it and want to explore it more	04:59
eyequeue	!ask	04:59
ubotu	Don't ask to ask a question. Just ask your question :)	04:59
rxknmir	thanks	04:59
chris_	jimmygoon, 500mhz with 512mb of ram :P .... amd k6 processor :)	04:59
rxknmir	im having a prob with azureus	05:00
chris_	upgraded ram to 512 orginally had 32 mb's	05:00
frogzoo	wachunei: best google for it	05:00
=== loststar4545 [n=loststar@74.136.96.224] has joined #ubuntu
rxknmir	it aint workin with firefox when i click the azureus magnet link	05:00
tuliomgui	!xgl	05:00
jimmygoon	chris_ ah! I was wondering how you buy a 500mhz pc with 512 mb of ram... lol	05:00
ubotu	Compiz (compositing (window) manager) and XGL (Xserver architecture layered on top of OpenGL) howto at http://wiki.ubuntu.com/CompositeManager XGL+compiz help in #ubuntu-xgl See http://tinyurl.com/pw5ez for Kubuntu systems	05:00
Killeroid	rxknmir : go to #azureus	05:00
wachunei	frogzoo: google gave me this http://www.bedroomlan.org/~alexios/coding_evrouter.html	05:00
chris_	jimmygoon its a laptop	05:00
Dravas	After I install Apache2 how do I start it	05:00
frogzoo	wachunei: read that	05:00
rxknmir	thanks brother	05:00
trafiq	Yeah !	05:00
hintswen	synic, i wouldn't sell it. I'd need proper permission for that, I just want 1 to wear :)	05:00
synic	Dravas: if you installed it with apt, it's already started.	05:00
trafiq	nerolinux work on amd 64 :P	05:00
Dravas	ok	05:01
jimmygoon	dravas - it should be running already..	05:01
chris_	jimmygoon, processor on it sucks belive me maybe ubuntu may boost things along :)	05:01
hintswen	got a casual day comming up soon @ school and i got all my friends to use ubuntu, just wanna make them jelous lol	05:01
wachunei	Dravas: /var/www/ put your sites in this folder and enter to http:/localhost	05:01
wachunei	*http://localhost	05:01
jimmygoon	chris_ I have ubuntu on a P2 and its painful :D	05:01
loststar4545	Hello i am having a problem with wine when i run winecfg and click auido tab it crashes and says Creating link /home/christopher/.kde/socket-pc2. can't create mcop directory	05:01
frogzoo	wachunei: the alternate way is to use xev, & xmodmap	05:01
synic	hintswen: what will you put on the shirt?	05:01
jimmygoon	(not now of course)	05:01
chris_	think a 6gb hard drive is plenty?	05:01
Dravas	thanks wachunei and jimmygoon and synic	05:01
chris_	or have a 60 gb? :)	05:01
frogzoo	chris_: 6gig will be painful	05:02
jimmygoon	chris_ I can't imagine someone using a 500mhz pc and using up more than 6gigs lol	05:02
chris_	painful meaning good?	05:02
Renan_s2	I have Ubuntu on a 12GB partition + 7GB partition for /home	05:02
=== Senesence [n=senesenc@ool-4354af9b.dyn.optonline.net] has joined #ubuntu
chris_	painful meaning good??	05:02
chris_	like good amount?	05:02
jimmygoon	chris_ did you see my comment :P	05:02
frogzoo	chris_: pain is a virtue?	05:02
Renan_s2	chris_, it is OK if you don't store large files	05:02
=== ernz [n=ernz@217.17.112.189] has joined #ubuntu
chris_	great	05:02
Killeroid	loststar4545: go to #winehq	05:03
chris_	:	05:03
Renan_s2	I think that a standard Ubuntu install takes about 2GB	05:03
chris_	:)	05:03
ernz	I finally fixed my greeter application problem!!! SWEET!	05:03
chris_	yup	05:03
hintswen	synic, dunno. I was thinking of the image what says "ubuntu linux for human beings" if i can find it, or something else... i thought of using the "Ubuntu Partner" picture but i guess i shouldn't use that! lol	05:03
frogzoo	chris_: just my /usr is 8gig atm	05:03
synic	chris_: take it easy on the mp3s and mpgs and you'll be fine :)	05:03
jimmygoon	jeez frogzoo !!!	05:03
chris_	cool frogzoo, making the laptop have 60 gb of hard drive space :)	05:03
Renan_s2	all my large files are at a 50GB partition	05:03
jimmygoon	do they sell ubuntu T's anywhere?	05:03
Senesence	Is there an icon for blender3d in gnome?	05:03
=== philth_ [n=philth@d38-179-126.home1.cgocable.net] has left #ubuntu ["Leaving"]
jimmygoon	cause that would be a sweet way to support ubuntu	05:03
chris_	DBO my ftp isnt working	05:04
chris_	:P	05:04
ernz	There is Senesense	05:04
ChocoCid	Senesence : i have an icon in applications next to it, not sure if it's blender or a generic image	05:04
frogzoo	jimmygoon: I have quite a few things running on this lappie	05:04
DBO	chris_, sorry, Im getting ready for vacation	05:04
chris_	anyone here using NVU?	05:04
chris_	DBO have a good trip where to kubuntu trip ? :P	05:04
Senesence	where /usr/share/icons/????	05:05
jimmygoon	what is nvu (that would bea no probably)	05:05
ernz	it is in...	05:05
wachunei	chris_: i use the text editor	05:05
chris_	new desktop vacation? :P	05:05
=== Jenkens [n=j0okie@c-24-9-24-14.hsd1.co.comcast.net] has left #ubuntu []
frogzoo	Senesence: /usr/share/pixmaps/ maybe?	05:05
poupqyre	Can anyone help me determine the driver my wireless card is using? It works, but I need to figure out which exact one is allowing it to function in order to configure wep/wpa.	05:05
chris_	wachunei thanks for letting me know :)	05:05
Senesence	No I looked, no blender icon	05:05
Killeroid	jimmygoon: open source replacement for frontpage	05:05
Killeroid	hehe	05:05
=== Dr_Willis [n=willis@74.132.83.197] has joined #ubuntu
wachunei	chris_: xD	05:05
jimmygoon	killeroid: I knew that... just forgot	05:05
=== ral_hn [n=raul@205.211.199.20] has left #ubuntu []
Senesence	I installed blender manually so icons didnt install with it	05:05
ernz	/home/username/.icon/etiquette/scalable/apps/blender.svg	05:05
ernz	:D	05:05
Killeroid	lol	05:05
FusionXN1	Hmm, I have something wring with ALSA i cant play anything. XINE says "Xine could not be started as no audio drivers could be found" can anyone help?	05:06
ardchoille	Senesence: open a term and type: locate blender	05:06
FusionXN1	wrong*	05:06
jimmygoon	I'm a jedit kinda guy I <3 php (sad that the guy left... unhappy about antisemtic comments but thats a diff story)	05:06
chris_	wachunei ever hear of no-ip.com?	05:06
wachunei	Senesence: put a belnder3d.png icon in ~/.icons	05:06
=== shadeofgrey [n=shadeofg@69-172-102-74.atlsfl.adelphia.net] has joined #ubuntu
ardchoille	Senesence: I have several blender icons and I don't even have blender installed	05:06
ernz	I could send you the SVG if you like Senesence	05:06
wachunei	chris_: no, why?	05:06
frogzoo	poupqyre: try sudo lspci & look in /var/log/messages at bootup	05:06
chris_	it has services for ftp and domain names free and all..	05:06
Senesence	ernz: no thanks I think I will menage now.	05:06
ernz	Cool dude	05:06
Senesence	Thanks everyone	05:06
=== pingoo [n=seraph@40-163.127-70.tampabay.res.rr.com] has left #ubuntu []
wachunei	chris_: thanks for letting me know	05:07
=== Oompa [i=Oompa@c-67-166-234-98.hsd1.tx.comcast.net] has joined #ubuntu
chris_	trying to get ftp working so i can publish files from another computer not on my network and will update from another computer on another network so its kinda neat nvu	05:07
helfrez	anyone know a linux prog that can handle png files from fireworks	05:07
chris_	wachuni smart ass :P	05:07
chris_	lol thanks for letting me know :;)	05:07
Renan_s2	helfrez, GIMP?	05:07
=== Senesence [n=senesenc@ool-4354af9b.dyn.optonline.net] has left #ubuntu []
chris_	only problem is ftp serrvies	05:08
=== MistaED [n=mistaed@203-158-54-32.dyn.iinet.net.au] has joined #ubuntu
helfrez	nah i dont think gimp can handle the layers lets see	05:08
hintswen	synic, got a suggestion as to which image I should put on my tshirt? =D	05:08
chris_	working and all just no-ip.com is shabby meaning not working right maybe ? :P	05:08
chris_	ohh welll	05:08
=== medfly [n=som1@87.69.99.197] has joined #ubuntu
chris_	not working*	05:09
medfly	can i somehow resize the partitions after installing ubuntu?	05:09
Killeroid	hintswen: check out the new images on the edgy fit artwork wiki page,some awesome images there	05:09
wachunei	chris_: i didn't understand anything	05:09
chris_	lol	05:09
=== chris_ wachunei its ok... :)
synic	hintswen: I'd like just their logo on a white shirt	05:09
chris_	talking to myself	05:09
synic	hintswen: the circle logo	05:09
DavidJaq	I've got a problem...	05:10
helfrez	nope anyone else?	05:10
=== klos [i=hans@p54A83420.dip0.t-ipconnect.de] has joined #ubuntu
wachunei	medfly: i've tried to rezise the ext3 partitions from Gparted and gparted live and i could not..	05:10
Dravas	I installed CGI IRC and where are the config files?	05:10
MistaED	did anyone get my message roughly 15 mins ago?	05:10
frogzoo	medfly: yes - best to use a live cd, as you can then resize / - bare in mind, you can't relocate the parition start boundaries, just the ends	05:10
wachunei	frogzoo: so, you can resized but not move...	05:10
wachunei	*resixe	05:10
loststar4545	whats the best way to find a file on my system?	05:10
wachunei	**resize	05:10
frogzoo	wachunei: that's what I said	05:11
MistaED	hey i just got a 320gb sata drive which i want to transfer windows and ubuntu to with any tools i can (dd, partimage, tar, etc.) from an 80gb pata, i know with ubuntu i can just fix up grub and fstab by changing /dev/hda to /dev/sda (anything else?) but with windows, will that just flake out or can i tweak it somehow so C: is at the right device mount?	05:11
wachunei	frogzoo: yup :)	05:11
ardchoille	wachunei: lol, you using my keyboard again	05:11
=== overrider [n=override@unaffiliated/overrider] has joined #ubuntu
=== neoncode [n=neoncode@unaffiliated/neoncode] has joined #ubuntu
jimmygoon	loststar4545: "sudo updatedb; locate FILENAME"	05:11
frogzoo	loststar4545: locate (quick), or find / -name filename (slow)	05:11
DavidJaq	I just did an install of Dapper using the server disc and it asked me to create a user... I did that... but it didn't ask me for a password... now it's got me at a login screen and I don't know what to do	05:11
wachunei	ardchoille: ??	05:11
hintswen	killefiz, what edgy fit artwork? lol	05:11
ardchoille	< wachunei> **resize	05:12
=== the_mug [n=the_mug@ip72-204-37-248.fv.ks.cox.net] has joined #ubuntu
trafiq	can someone send me libqt-mt.so.3 plz	05:12
jimmygoon	DavidJaq- although I don't have any idea why it would do that you (ought to be able to) repair it with the "Recovery" portion of the disc	05:12
frogzoo	MistaED: use tar, not dd	05:12
=== lukasz23 [n=lukasz23@gw-ww.telsten.com] has joined #ubuntu
Dravas	I installed CGI IRC and where are the config files?	05:12
wachunei	ardchoille: i did not understand	05:12
DavidJaq	jimmygoon, I can't boot from CD	05:12
jimmygoon	DavidJaq- how did you install it then?	05:12
the_mug	what are the necessary packages I need to install for me to be able to compile my own kernel modules?	05:12
Killeroid	hintswen: search the wiki(there is a page dedicated to drafts of the new artwork for edgy fit)	05:12
MistaED	frogzoo: and for the windows ntfs?	05:12
=== narg [n=narg@dsl-65-171-97-34.tcq.net] has joined #ubuntu
jimmygoon	trafiq- how can I send it to you?	05:12
DavidJaq	jimmygoon, instlux	05:13
Killeroid	hintswen: let me find the uri	05:13
DavidJaq	nevermind	05:13
DavidJaq	I got logged in now	05:13
frogzoo	MistaED: ghost or similiar	05:13
frogzoo	MistaED: or a real windows backup program	05:13
MistaED	frogzoo: hmm i only have partimage on me, i'll look it up	05:13
jimmygoon	trafiq- I queed the transfer	05:13
=== ImWolf [n=Administ@200.70.111.198] has joined #ubuntu
jimmygoon	davidjaq- well why can't you boot from cd?	05:14
jimmygoon	:S	05:14
Dravas	I installed CGI IRC and where are the config files?	05:14
=== the_hammer [n=the_hamm@S01060014858fa523.wp.shawcable.net] has joined #ubuntu
jeffisageek	have a question...just got a new monitor and have hooked it up...how do i set it up in ubuntu? what do i need to run to change my monitor settings	05:14
Renan_s2	!SCSI	05:14
ubotu	I know nothing about SCSI - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	05:14
FusionXN1	I found a small "bug" can i fix it? If i goto open with... on a music file AmaroK is listed twice.. how do i remove one	05:14
=== blind [n=blind@c-71-234-180-125.hsd1.ct.comcast.net] has joined #ubuntu
Renan_s2	!SATA	05:14
ubotu	I know nothing about SATA - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	05:14
MistaED	frogzoo: does windows just mount C: according to what the bootloader told it to assign C: to?	05:14
Renan_s2	!Serial ATA	05:14
ubotu	I know nothing about Serial ATA - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	05:14
DavidJaq	jimmygoon, it's something I like to call 'crappy software'. It's what happens when you get a computer for five bucks at a thrift store	05:14
=== deeghetal [n=ubuntu@c-68-61-213-73.hsd1.mi.comcast.net] has joined #ubuntu
ardchoille	!fixres > jeffisageek	05:14
deeghetal	ok now i really need help	05:14
=== ernz is now known as Harb0n4uBunfu
the_mug	nm...got it.... sudo apt-get install build-essential linux-source-2.6 libncurses5-dev kernel-package	05:14
jeffisageek	!fixres	05:15
ubotu	x is the X Window System; it's the part of your system that's responsible for graphical output. To restart your X, type this in a console: sudo /etc/init.d/?dm restart - To fix screen resolution or other X problems: http://wiki.ubuntu.com/FixVideoResolutionHowto	05:15
jimmygoon	David- have you poked around in the BIOS (sorry if this seems like obvious questions :P)	05:15
Killeroid	hintswen: http://wiki.ubuntu.com/Artwork/Incoming/EdgyProposals/Summary_18JULY2006	05:15
deeghetal	i installed the xorg driver for my radeon card and now when i boot ubuntu my screen goes dead. i'm using the Live CD right now.	05:15
=== jmchugh [n=jmchugh@adsl-144-190-25.rmo.bellsouth.net] has joined #ubuntu
Dravas	Which ports need to be forwarded for Apache?	05:15
the_hammer	hey all any of u guys tried to install an egg drop or have 1?	05:15
rxknmir	cant connect to peers on azureus guys....	05:15
=== chotchki [n=chotchki@unaffiliated/chotchki] has joined #ubuntu
jimmygoon	killeroid- I know its "web 2.0" and stuff but I'm addicted to the glass ;D	05:15
MistaED	frogzoo: like \\Devices\\Partition0\\verylongthingwhichcould'vebeen"/dev/sda1"\\Blah\\ will be differen't won't it? i'm no NT admin so....	05:15
frogzoo	MistaED: probably windows takes the bios's idea of whatever is the first partition on the first disk	05:16
DavidJaq	jimmygoon, Yes. I have tried working with the BIOS. I have no idea why people find it so hard to believe that I might actually know what I'm talking about when I say I can't boot from CD	05:16
jimmygoon	david - sorry... I was just asking :(	05:16
ImWolf	vvvv	05:16
wachunei	Dravas: what's your problem?	05:16
ardchoille	the That's quite offtopic for this channel	05:16
=== ImWolf [n=Administ@200.70.111.198] has left #ubuntu []
Killeroid	jimmygoon: yeahme too	05:16
Renan_s2	Has anybody here installed Ubuntu in a Serial ATA disk?	05:16
deeghetal	Renan: I have	05:16
DavidJaq	jimmygoon, sorry for being gruff... just that I get this unbelieving thing quite a lot with my system	05:16
kaatil	anyone can help me with eclipse installation issue? i seem cant install it because it require gij-4.0 lib which i has only gij-4.1 for x86	05:16
Dravas	wachunei I just wanna know if I have to forward any ports for Apache	05:16
chotchki	hey guys, I'm trying to force eclipse to run with java 1.5 and cant seem to get it to fine the right jvm... has anyone else gotten it to work?	05:16
Renan_s2	deeghetal, does it install normally? like installing in a normal IDE HD?	05:17
=== MatthewV [n=MatthewV@CPE-144-137-231-113.wa.bigpond.net.au] has joined #ubuntu
=== the_hammer [n=the_hamm@S01060014858fa523.wp.shawcable.net] has left #ubuntu []
hintswen	killefiz nice images!!! I might just end up putting multiple images on	05:17
kaatil	i am using dagger btw	05:17
deeghetal	Renan: yes it's the exact same procedure.	05:17
wachunei	Dravas: no, you have not	05:17
=== G-Man [i=Sasquatc@wikipedia/Sasquatch] has joined #ubuntu
frogzoo	MistaED: but there's also a qwerk with marking partitions as 'active', which might be honored by the bios - or not	05:17
Renan_s2	deeghetal, thanks	05:17
hintswen	killefiz, now there's 2 much choice!	05:17
Killeroid	hehe	05:17
torpedo\|dog	hey, I've got a problem with ddclient: it	05:17
jimmygoon	dravas- port 80? that is the port web pages are served off of	05:17
Dravas	ok	05:17
torpedo\|dog	's not sending my IP to dynDNS	05:17
deeghetal	if i'm using the live cd is it possible to mount my hard drive so i can fix my graphics card?	05:17
G-Man	who's got some good Unix/Linux pick up lines?	05:18
=== G-Man is now known as Sasquatch
wachunei	deeghetal: yup you can	05:18
Dr_Willis	Hay Baby! want to see my Kernel compile? :)	05:18
Killeroid	G-Man: pm me if you find some	05:18
Sasquatch	Dr_Willis: haha	05:18
Renan_s2	My kernel is so big that it overwrites the stack and dumps core :/	05:18
frogzoo	Sasquatch: from wayne's world 'Unix!! keweelll'	05:18
Killeroid	Sasquatch: pm me if you find some good ones	05:18
=== Silencer [n=Silencer@195.252.78.16] has joined #ubuntu
jimmygoon	me 2	05:19
DavidJaq	At this section of the guide, do I replace 'system_username' with the login I desire? http://ubuntuguide.org/wiki/Dapper#How_to_add.2Fedit.2Fdelete_network_users	05:19
Sasquatch	i got a few	05:19
Sasquatch	Nice boot, wanna fsck?	05:19
MistaED	sasquatch: have you seen my /dev/weener?	05:19
Sasquatch	MistaED: nope	05:19
Killeroid	lol	05:19
MistaED	:P	05:19
jimmygoon	dravas- this just occured.. if you are at a home network... there is a good chance that port 80 and/or all web traffic is blocked by your ISP unless you have a "business account"	05:19
Sasquatch	Why don't you make me root@you?	05:19
frogzoo	MistaED: for moving the ntfs partition, you could try dd - as long as you're pretty sure the disk has no bad blocks	05:19
Cntryboy	why do I get this error when I'm trying to make install this proggy? mkdir: cannot create directory `/usr/local/lib/gaim': Permission denied	05:19
Sasquatch	MistaED: haha, wait. i just got that	05:19
Sasquatch	i'm a retard	05:19
Renan_s2	please configure your firewall to allow traffic from me	05:20
ardchoille	Sasquatch: Can we take the off topic stuff to #ubuntu-offtopic please?	05:20
kaatil	try with SUDO, cntryboy	05:20
kaatil	sudo rather	05:20
Sasquatch	okay ardchoille, will do	05:20
frogzoo	Cntryboy: sudo make install	05:20
Dravas	My ISP Blocks port 6667 incoming	05:20
Dravas	>:(	05:20
Killeroid	cntryboy: attch sudo to beginnig of command	05:20
Cntryboy	I thought it was ./configure, sudo make then make install	05:20
Renan_s2	My ISP doesn't block any ports :)	05:20
jimmygoon	dravas- is that torernt trafic?	05:20
Renan_s2	Cntryboy, sudo make install	05:20
frogzoo	Dravas: dump your isp	05:20
=== kaatil nods at Renan
ardchoille	Cntryboy: Not a good idea to "make" using sudo. You do need sudo to "make install", though	05:20
Dravas	jimmygoon no IRC Server lol	05:21
ChocoCid	what exactly is the difference between make and make install?	05:21
jimmygoon	oops	05:21
Cntryboy	ardchoille: well what happen since I sudo make? :(	05:21
kaatil	just 'make' then 'sudo make install' oh well :)	05:21
ChocoCid	i haven't used either	05:21
jimmygoon	renan_s2 is it just regular isp? ... who?! ... Cox (literally) has a monopoly on this part of ks :(	05:21
=== chaitu [n=chaitu@202.65.135.5] has joined #ubuntu
Renan_s2	ChocoCid, 'make' builds, 'sudo make install' installs	05:21
Cntryboy	and yes sudo make install worked thx	05:21
=== chaitu [n=chaitu@202.65.135.5] has left #ubuntu ["Leaving"]
ardchoille	make builds the executables and other files, make install simply copies them to the necessary dirs	05:21
Dravas	I have my IRC server running off port 5800	05:21
Dravas	lmfao	05:21
ChocoCid	so what's wrong with sudo make ?	05:21
Asc	how does one 'echo' a console (so you can see what commands someone is enterint)?	05:21
Cntryboy	I know but he said its not good idea to sudo make, I already did that :(	05:21
Dravas	VNC port	05:21
Renan_s2	I am in Brazil so this won't help, but my ISP is my phone company.	05:21
Dravas	lmfao	05:21
Dr_Willis	Cntryboy, normally ya make as a user, (its safer) then when its done sudo make install	05:22
jimmygoon	dravas- I'm terribly slow tonight.. I was sitting here going ... what is that port... I know its familiar :S	05:22
kaatil	yep yep	05:22
Cntryboy	Dr_willis: yes I figured that, but should I some how redo it or what should I do?	05:22
=== Ropechoborra Adios
=== jongeun [n=jongeun@218.48.18.155] has joined #ubuntu
jongeun	Hey	05:23
jimmygoon	hry	05:23
wachunei	hey	05:23
ardchoille	Cntryboy: What are you compiling?	05:23
=== jeffisageek [n=jeffisag@CPE-65-30-78-10.kc.res.rr.com] has joined #ubuntu
jimmygoon	just out of random curiosity does anyone here use allpeers? (or want to for that matter... I have invites) (i think)	05:23
Dr_Willis	Cntryboy, i doubt if it matters	05:24
jongeun	I want to know how to recommand sound card..	05:24
Killeroid	jimmygoon: I use allpeers	05:24
Cntryboy	yes	05:24
=== pradeep [n=pradeep@59.92.44.239] has joined #ubuntu
jimmygoon	killeroid - cool :) is it any good? I haven't gotten to test it yet :P	05:24
ardchoille	Cntryboy: What app are you compiling?	05:24
Cntryboy	after I compile this source for gaim plugin do I need to find the binary or no, to get it working	05:24
Killeroid	jimmygoon: its quite a memory hog in linux	05:24
jimmygoon	:(	05:24
deeghetal	i tell you guys after what i have dealt with on my PC this week i'm ready to become amish.	05:24
Killeroid	jimmygoon: and not that many users sharing files	05:25
wachunei	I want to ask something to you all guys: will you use Mac Os if you can?	05:25
Dravas	jimmygoon you know where the CGIIRC configs are stored	05:25
deeghetal	wachunei: YES	05:25
Killeroid	jimmygoon: and most people dont leave firefox runnig for long periods of time so downloads keep getting interrupted	05:25
Dravas	I ibnstalled it to run off my PC	05:25
jimmygoon	killeroid: am I right in understanding that you have to know the users name as well or something like that..... cgiirc-- not familiar sorry	05:25
Dravas	Aww fudge	05:25
jimmygoon	killeroid- never thought of that... I would've expected it to be a frontend or something ... but I suppose that wouldn't make a whole lotta sense would it	05:26
Killeroid	jimmygoon: yeah,you need to get another user's username to share files with him	05:26
=== mateus [n=mateus@c8fc886c.bsb.virtua.com.br] has joined #ubuntu
loststar4545	is cedega better running games like world of warcraft then wine?	05:26
=== pschulz01 [n=paul@202.174.42.5] has joined #ubuntu
deeghetal	cedega isn't BETTER it's easier.	05:26
deeghetal	cedega IS wine from what i understand	05:26
jimmygoon	wachunei - no way, if I wanted to be treated like a 2 year old I would	05:26
Killeroid	cedega vs wine flame war coming up!!	05:26
Killeroid	hehe	05:27
deeghetal	no reason for a flame war	05:27
sktx	anyone familiar with xchat? like the hotkey to bring the menubar back up?	05:27
deeghetal	you have to pay for cedega which makes it instantly worse.	05:27
Killeroid	deeghetal: I was j/k.i have weird sense of humor	05:27
jimmygoon	isn't cedega JUST wine with additions from transgaming who in turn contributes lots of code to wine?	05:27
jimmygoon	sktx - not familiar but am using ;)	05:27
Killeroid	yeah	05:27
deeghetal	jimmygoon: yes	05:27
jimmygoon	and you can just compile it from source... for free... and the $5 is in a way supporting wine anyways	05:28
deeghetal	i'll be getting cedega once i solve my graphic card problems	05:28
DavidJaq	I'm using the server install of Ubuntu and thus I don't have access to gedit... but the tutorial for letting me set up a samba file server is telling me to use gedit... what can I do?	05:29
fistandantilus	DavidJaq: use nano	05:29
=== DarthShrine [n=Angus@pdpc/supporter/student/DarthShrine] has joined #ubuntu
DarthShrine	Hello.	05:29
spades	sktx try ctrl+f9	05:30
FusionXN1	I found a patch for my TV Tuner its a .diff file - how do i use it?	05:30
sktx	spades: ha! thanks man	05:30
=== rxknmi1 [n=rxknmir@210.4.12.193] has joined #ubuntu
=== Lurkan [n=agsm@201.152.233.185] has joined #ubuntu
jimmygoon	DavidJaq - I really can't help you with the user problems but I'm pretty sure that a default server install doesn't have a X environment anyways so you will have to either install one (lots of space) or use "nano" "vi" or "emacs" or some kind of text based equivalent	05:30
sktx	vi!	05:31
FusionXN1	!diff	05:31
ubotu	I know nothing about diff - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	05:31
DarthShrine	How does one compile an app for Windows in Ubuntu? I used to know and now I have no idea.	05:31
deeghetal	use magic	05:31
FusionXN1	Now on knows how to use a diff file?	05:31
jimmygoon	sktx : here you go......... "Which is better? Emacs or Vi?"	05:31
deeghetal	gotta reboot	05:31
deeghetal	brb	05:31
sktx	vi!	05:31
=== deeghetal [n=ubuntu@c-68-61-213-73.hsd1.mi.comcast.net] has left #ubuntu []
sktx	:)	05:31
jimmygoon	I use gedit and jedit :P	05:32
tuliomgui	can someone help me with the nvidia-glx??	05:32
=== pinky [n=pinky@adsl-70-143-78-6.dsl.pltn13.sbcglobal.net] has joined #ubuntu
tuliomgui	i try to run the commando on the terminal but the command cant be found	05:33
DavidJaq	Ok... the tutorial I'm using is not n00b friendly.... could someone either help me or point me to a better tutorial? I need to set up a samba server using the server install of Dapper	05:33
tuliomgui	ive already installed the nvidia-glx package	05:33
=== jim__ [n=jim@68-185-65-6.dhcp.trlk.ca.charter.com] has joined #ubuntu
tuliomgui	!nvidia-glx	05:33
ubotu	I know nothing about nvidia-glx - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	05:33
tuliomgui	!nvidia	05:33
ubotu	To install the Ati/NVidia drivers for your video card, see https://wiki.ubuntu.com/BinaryDriverHowto	05:33
=== nek1 [n=aldin@as54-ma1.dlp305.bih.net.ba] has joined #ubuntu
=== live95 [n=ubuntu@pool-71-106-129-51.lsanca.dsl-w.verizon.net] has joined #ubuntu
=== deeghetal [n=brian@c-68-61-213-73.hsd1.mi.comcast.net] has joined #ubuntu
=== rxknmi1 [n=rxknmir@210.4.12.193] has left #ubuntu []
live95	Is it possible now to install Mepis on a machine with ubuntu, from the repos?	05:34
wachunei	!mepis	05:35
ubotu	I know nothing about mepis - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	05:35
wachunei	what's mepis?	05:35
=== jeffisageek [n=jeffisag@CPE-65-30-78-10.kc.res.rr.com] has joined #ubuntu
=== nixternal_ [n=nixterna@ubuntu/member/nixternal] has joined #ubuntu
jimmygoon	mepis is a ubuntu based distro	05:35
eyequeue	some other distro	05:35
jimmygoon	it used to be based on debian I think	05:35
=== Ptero-4 [n=Ptero-4@201.224.4.104] has joined #ubuntu
eyequeue	i think so jimmygoon	05:35
Ptero-4	Hi. First time here.	05:36
jimmygoon	hi	05:36
DavidJaq	!samba	05:36
ubotu	samba is the way to cooperate with Windows environments. Links with more info: https://wiki.ubuntu.com/MountWindowsSharesPermanently http://help.ubuntu.com/ubuntu/serverguide/C/windows-networking.html Samba can be administered via the web with SWAT	05:36
=== azrael0 [n=azrael@c-66-41-152-252.hsd1.mn.comcast.net] has joined #ubuntu
wachunei	can you install a distro from another distro?	05:36
=== Q_Continuum [n=Q_Contin@rrcs-67-52-219-78.west.biz.rr.com] has joined #ubuntu
jimmygoon	wachunei- sometimes you can	05:36
eyequeue	wachunei, typically no	05:36
Ptero-4	I just got Breezy, it's a very nice distro so far.	05:36
live95	jimmygoon: since the share the same repos seems like you could install mepis kernel and desktop from ubuntu repos, yes/no?	05:36
=== tich [n=bradley@MTL-ppp-153387.qc.sympatico.ca] has joined #ubuntu
wachunei	Ptero-4: get dapper!	05:37
Killeroid	ptero-4: breezy?	05:37
jimmygoon	live95- I don't know enough to tell you either way :S	05:37
Killeroid	thats old	05:37
=== rxknmi1 [n=rxknmir@210.4.12.193] has joined #ubuntu
=== DarkED [n=darked@adsl-146-137-146.clt.bellsouth.net] has joined #ubuntu
=== ToHellWithGA [n=ryan@c-69-180-28-244.hsd1.ga.comcast.net] has joined #ubuntu
jimmygoon	wach - I'm gonna try to install debian from floppy and network and then convert to ubuntu because ubuntu doesn't have netboot (WHY???!!!!)	05:37
Ptero-4	Killeroid. I want to install dapper but it got some bad errors in the po/ppp stuff.	05:37
=== runes [n=runes@70.52.192.45] has joined #ubuntu
=== nek1 [n=aldin@as54-ma1.dlp305.bih.net.ba] has left #ubuntu []
Ptero-4	The error is something like a "can't get terminal parameters" error message in plog and then pppd shuts down.	05:38
FusionXN1	Anyone help me with this here .diff file?	05:38
DavidJaq	could someone look this over and tell me if it'd work under the server install of dapper? http://www.howtoforge.com/samba_setup_ubuntu_5.10	05:38
eyequeue	FusionXN1, "man diff patch" i'd say	05:38
eyequeue	FusionXN1, the two commands involved	05:39
Dr_Willis	samba details aint changed muched :) even old samba books are still good to pick up if ya can find them cheap.	05:39
FusionXN1	eyequeue: It's this for my tv tuner http://linuxtv.org/wiki/index.php/Kworld_V-Stream_Xpert_DVB-T/Software_%26_Patch	05:39
Ptero-4	I posted a thread on www.ubuntuforums.org if anyone have an account there.	05:39
eyequeue	FusionXN1, over my head, sorry	05:39
Dr_Willis	DavidJaq, install the samba packages.. use smbpasswd -a USERNAME , and edit the samba conf as needed. :) then restart the services	05:39
Dravas	How do I run File Manager in Super User mode?	05:39
jimmygoon	sudo nautilus	05:39
Dravas	thx	05:40
Ptero-4	Dravas. Use gksudo nautilus --browse	05:40
Dr_Willis	running nautilus as root.. is a very bad habbit to get into. :)	05:40
=== ruiwen [n=rw@bb219-75-63-231.singnet.com.sg] has joined #ubuntu
DavidJaq	Dr_Willis, you lost me after the 'edit'	05:40
slavezero	can someone paste there authentication key from the synaptics package manger	05:40
=== facundo [n=facundo@200-122-39-29.dsl.prima.net.ar] has joined #ubuntu
jimmygoon	I still don't get sudo vs gksudo >_<	05:40
Dr_Willis	DavidJaq, sambas comfig file may need editing. depending on your needs	05:40
FusionXN1	I have to patch the kernel with it eyequeue	05:40
=== timalot [n=tim@202-78-148-47.cable.telstraclear.net] has joined #ubuntu
Ptero-4	jimmy. sudo is for terminal apps and gksudo far the gui ones	05:40
eyequeue	FusionXN1, i suspected so	05:40
DarkED	hey all	05:41
FusionXN1	eyequeue: how do i go about doing that	05:41
=== rxknmi1 [n=rxknmir@210.4.12.193] has left #ubuntu []
Ptero-4	slavezero. The synaptic key is your user password.	05:41
=== Renan_s2 [n=Renan@201.47.220.201] has joined #Ubuntu
=== Ron_ [n=Ron@pool-72-85-201-14.bstnma.east.verizon.net] has joined #ubuntu
eyequeue	FusionXN1, you'll pipe it into patch, maybe with a -p switch, maybe not	05:41
slavezero	Ptero-4: really ok im trying to track down why my apt does not work	05:41
FusionXN1	eyequeue: well i gotta patch the kernel for it to recignize it	05:42
Ptero-4	slavezero. Are you using the user account you created when ou installed ubuntu?	05:42
eyequeue	FusionXN1, it will make any edits it can, flag any it can't, and you'll then do your standard kernel building commands	05:42
=== blind [n=blind@c-71-234-180-125.hsd1.ct.comcast.net] has joined #ubuntu
slavezero	Ptero-4: yes	05:42
FusionXN1	eyequeue: if i can - can you provide me with the command to run? I'm still new to ubuntu	05:42
eyequeue	FusionXN1, "make-kpkg" may still be how you build a kernel deb that you then install	05:42
runes	if you have amd 64 chip runnign ubuntu 6.06lts (non 64 bit version) which kernel ehaders would you load?	05:42
=== pcwick [n=pcwick@12-226-119-122.client.mchsi.com] has joined #ubuntu
FusionXN1	k thx 1 mo	05:43
eyequeue	FusionXN1, that's why i fed you ",am patch" to see what the -p switch is and if you need it	05:43
FusionXN1	make-kpkg FILENAME.diff ?	05:43
Ptero-4	Then there's something wrong. Do you use dapper. Dapper has problems with sudo and maybe gksudo too.	05:43
=== SlyGuy [n=cduhard@S0106000fb55ad233.wp.shawcable.net] has joined #ubuntu
DavidJaq	in /etc/network/interfaces I have 'auto eth0' and 'iface eth0 inet dhcp' ... how would I change it so it has a static IP?	05:43
eyequeue	FusionXN1, no no, make-lpkg is for completely after you are done with the diff	05:44
=== maxime_ [n=maxime@modemcable112.67-82-70.mc.videotron.ca] has joined #ubuntu
FusionXN1	oh :(	05:44
SlyGuy	hmmm anyone have trouble getting XGL to run properly?	05:44
=== ThomazLeite [n=thomaz@200.149.105.115] has joined #ubuntu
FusionXN1	Im stuck	05:44
eyequeue	FusionXN1, "man patch" first	05:44
Dr_Willis	SlyGuy, a huge # of people have problems. :P	05:44
SlyGuy	i get no windows around my apps	05:44
SlyGuy	and they are all in the left corner	05:44
SlyGuy	yeah?	05:44
SlyGuy	hmm	05:44
=== lastnode [n=lastnode@220.247.245.110] has joined #ubuntu
FusionXN1	it gives me a description of "patch"	05:44
eyequeue	FusionXN1, so you can understand it, and then write your patch command with the proper format	05:45
eyequeue	FusionXN1, that's the key to the diff file part	05:45
=== verbose [i=nobody@24-155-107-19.dyn.grandenetworks.net] has joined #ubuntu
davey_	can vmware player be installled on amd64 ubuntu	05:45
admi	how do i run maketorrent thru wine?	05:45
Renan_s2	!Xgl	05:46
ubotu	Compiz (compositing (window) manager) and XGL (Xserver architecture layered on top of OpenGL) howto at http://wiki.ubuntu.com/CompositeManager XGL+compiz help in #ubuntu-xgl See http://tinyurl.com/pw5ez for Kubuntu systems	05:46
FusionXN1	eyequeue: "man diff patch	05:46
FusionXN1	oops	05:46
FusionXN1	eyequeue: patch -pnum <patchfile	05:46
davey_	vmware doesn't seem to have a port for it	05:46
SlyGuy	well at least i got my video card working correctly tonight	05:46
eyequeue	FusionXN1, yeah, what "num"? if any	05:46
Ptero-4	you can always run it in a chroot	05:46
SlyGuy	i am now windows free for 2 months...	05:46
SlyGuy	OSX and Ubuntu on my laptop	05:47
runes	Mind if I ask a kernel question?	05:47
Ptero-4	slyguy. I'm windoze free for 5 years now.	05:47
Killeroid	!ask	05:47
ubotu	Don't ask to ask a question. Just ask your question :)	05:47
FusionXN1	eyequeue: i dont understand it says: patch [options] [originalfile [patchfile] ]	05:47
FusionXN1	but usually just	05:47
FusionXN1	patch -pnum <patchfile	05:47
Renan_s2	I am Windows free since yesterday :)	05:47
Killeroid	!ask > runes	05:47
=== move [n=move@pool-72-77-247-220.tampfl.fios.verizon.net] has joined #ubuntu
eyequeue	FusionXN1, yeah, "num" is a number and changes	05:47
SlyGuy	this version of linux is the first I have ever considered replacing windows with	05:47
eyequeue	FusionXN1, patchfile is that one you showed me	05:47
FusionXN1	i got the patch file on my desktop	05:48
SlyGuy	the first version i ever installed was Slackware 3	05:48
=== Geoffrey2 [n=jeffrey@c-71-207-119-213.hsd1.pa.comcast.net] has joined #ubuntu
Renan_s2	I started with Red Hat 9 in 2003	05:48
Ptero-4	funny, slyguy. The unix distro I used to replace windoze with is OSX and then replaced osx with ubuntu.	05:48
=== Ignite_ [n=Ignite@ACCF269B.ipt.aol.com] has joined #ubuntu
runes	Killeroid, after installing 6.06 32 bit on my amd 64 I am not sure which kernel headers and image to use nor how to load it instead of the default	05:48
eyequeue	FusionXN1, you already installed (then unarchived) package linux-source-foo, right?	05:48
FusionXN1	no	05:49
=== slavezero [n=rob@6532141hfc185.tampabay.res.rr.com] has left #ubuntu []
=== nippy\|lfs [n=Brian@216-15-45-30.c3-0.161-ubr1.lnh-161.md.cable.rcn.com] has joined #ubuntu
SlyGuy	VMWare is expensive ain't it? i could use windows in VM for VS.NET	05:49
eyequeue	FusionXN1, a diff file will do you no good if you don't have the sources to patch against	05:49
eyequeue	!kernel	05:49
ubotu	kernel is the core of the Ubuntu Operating System (named 'Linux'). You shouldn't have to compile one, but if you're convinced you do, see https://wiki.ubuntu.com/KernelCustomBuild	05:49
FusionXN1	eyequeue: where i grab em from	05:49
=== RadiantFire [n=ryan@c-69-180-43-27.hsd1.ga.comcast.net] has joined #ubuntu
eyequeue	FusionXN1, you should start there ^^ https://wiki.ubuntu.com/KernelCustomBuild	05:50
eyequeue	FusionXN1, sudo apt-get install them	05:50
=== tonyyarusso [n=anthony@dialup-4.159.11.80.Dial1.Chicago1.Level3.net] has joined #ubuntu
eyequeue	FusionXN1, sudo apt-get install linux-source-somethinglonghere	05:50
FusionXN1	k 1 sec	05:51
Terminus	SlyGuy: VMWare server is free as in beer.	05:51
=== stack_push [n=stack_pu@peterson.dim.com] has joined #ubuntu
Geoffrey2	has anyone heard a release date for Flash 9 for Linux?	05:51
FusionXN1	2007	05:51
Dr_Willis	'when its done'	05:51
FusionXN1	beta october	05:51
Dr_Willis	:)\	05:51
SlyGuy	Terminus: whats server do?	05:51
Terminus	SlyGuy: you could use qemu if you don't want a 100mb download though.	05:51
=== _maydayjay_ [n=maydayja@maydayjay.net] has joined #ubuntu
FusionXN1	eyequeue: done	05:51
jimmygoon	Geoffrey2 - the same time the PS3 comes out with the original stats that sony (lied) us they would have	05:51
SlyGuy	i have 10Mbit no biggie	05:51
Terminus	SlyGuy: same stuff you can do with VMWare Workstation.	05:52
eyequeue	FusionXN1, sudo apt-get install linux-source-`uname -r`	05:52
SlyGuy	is there extra overhead?	05:52
admi	how do i run maketorrent thru wine?	05:52
SlyGuy	only 1gb of ram on this laptop	05:52
=== poncho1 [n=poncho@69.27.195.70] has joined #ubuntu
Dr_Willis	wine /path/to/maketorrent.exe	05:52
admi	ty	05:52
FusionXN1	eyequeue: E: Couldn't find package linux-source-2.6.15-26-686	05:52
Terminus	SlyGuy: that's already a lot. i haven't tried vmware in years though. qemu is good enough for my needs.	05:52
Dr_Willis	it pays to read the wine docs. :)	05:52
eyequeue	FusionXN1, then go ahead and follow that howto, after you unpack what that den just gave you	05:52
FusionXN1	1 mo	05:52
runes	darn it originally loaded the 686 kernel	05:53
SlyGuy	can you tell me more about qemu?	05:53
eyequeue	!info linux-source-2.6.15-26-686	05:53
ubotu	Package linux-source-2.6.15-26-686 does not exist in dapper	05:53
Dr_Willis	!qemu	05:53
ubotu	qemu is an emulator you can use to run another operating system - see https://wiki.ubuntu.com/WindowsXPUnderQemuHowTo	05:53
SlyGuy	thanks	05:53
Terminus	SlyGuy: qemu is also a VM and you can run almost any OS on it, from windows to bsd.	05:53
hintswen	killefiz, you know thoes pictures u linked me to, can i actually get my ubuntu to look like that?	05:53
runes	oops Linux portal 2.6.15-26-386	05:53
runes	need k7	05:54
runes	nm	05:54
SlyGuy	how does it perform compared to something like VMWare?	05:54
jimmygoon	hintswen - what was the link maybe I can help	05:54
eyequeue	FusionXN1, sudo apt-get install linux-source-2.6.15	05:54
Terminus	SlyGuy: around the same i guess. i'm using the kqemu accelerator though.	05:54
hintswen	https://wiki.ubuntu.com/Artwork/Incoming/EdgyProposals/Summary_18JULY2006	05:54
FusionXN1	eyequeue: ok	05:54
eyequeue	FusionXN1, source has the short names	05:54
Killeroid	hintswen: check gnome-look.org	05:54
FusionXN1	after this is done what then?	05:55
runes	Terminus, does qemu all for full network access in a windows environment?	05:55
hintswen	thx	05:55
=== iceaxe18 [n=iceaxe18@c-67-183-184-155.hsd1.wa.comcast.net] has joined #Ubuntu
SlyGuy	whats that terminus?	05:55
hintswen	ooh nice	05:55
Terminus	SlyGuy: if you're gonna use qemu, i'd suggest you build from sources. the one in the repos is quite old.	05:55
eyequeue	FusionXN1, then unpack what it gives you in /usr/src	05:55
jimmygoon	hintswen- those are just big images of all the proposed graphics put together... you won't actually find those "themes" anywhere... obviosuly aside from if they are in edgy	05:55
eyequeue	FusionXN1, then follow https://wiki.ubuntu.com/KernelCustomBuild	05:55
Terminus	runes: there's a lot of options. your host OS can be a NAT, you can use tunneling, etc.	05:55
FusionXN1	its installing it	05:55
Terminus	SlyGuy: it's a kernel accelerator for the VM.	05:56
Terminus	!kqemu	05:56
ubotu	kqemu is non-free kernel module for speeding up the !QEMU virtual machine. Installation instructions can be found at http://wiki.ubuntu.com/KQEmu - see also !qvm86	05:56
Geoffrey2	obvious question, if you can dual boot the operating system, what's the advantage of running it inside a virtual machine?	05:56
=== rxknmi1 [n=rxknmir@210.4.12.193] has joined #ubuntu
runes	Terminus thx	05:56
tonyyarusso	How can I disable tap-to-click on a Synaptics touchpad for a laptop? My dad hates it when things get clicked by his palm.	05:56
jimmygoon	terminus - NO! I just went through that process a while back! It was a PITA! big TIME! It wanted a different CC for both qemu and kqemu and then it would accepter CC= bal.py ... I had to actaully change the link and then change it back	05:56
SlyGuy	you don't see the advantage?	05:56
Terminus	Geoffrey2: you can use both at the same time?	05:56
jimmygoon	it was terrible	05:56
Killeroid	jimmygoon: dont burst hintswen's bubble.maybe he can find similar looking themes at gnome-look	05:56
SlyGuy	Parallels on OSX is quite fast	05:56
Terminus	jimmygoon: i got it working right. compiled qemu with gcc-3.3 and kqemu with gcc-4.0	05:56
SlyGuy	i havea new intel iMac	05:56
=== Renan_s2 [n=Renan@201.47.220.201] has joined #Ubuntu
Terminus	SlyGuy: well, if you've got parallels, why not just use parallels?	05:57
jimmygoon	terminus - how did you do it? generally I mean of course? It was really difficult for me, but to be honest that was the first time ever compiling from source	05:57
eyequeue	FusionXN1, https://wiki.ubuntu.com/KernelCustomBuild will try to talk you out of this foolishness?	05:57
SlyGuy	i have parallels for OSX	05:57
jimmygoon	(btw, I alsmost near a year on ubuntu so I'm still learning a bit)	05:57
eyequeue	FusionXN1, heh	05:57
FusionXN1	eyequeue: what do you mean... im new to ubuntu this is advanced	05:57
=== whyameye [n=cratel@ip68-102-23-64.ks.ok.cox.net] has joined #ubuntu
FusionXN1	finished downloading	05:58
eyequeue	FusionXN1, yes, this is advanced, and most don't need to do this, especially not as newbies	05:58
move	osx gave me the clap	05:58
Dr_Willis	!info kqemu	05:58
ubotu	Package kqemu does not exist in dapper	05:58
=== synth7 [i=synth@69-164-39-165.atlaga.adelphia.net] has joined #ubuntu
Renan_s2	!kqemu	05:58
ubotu	kqemu is non-free kernel module for speeding up the !QEMU virtual machine. Installation instructions can be found at http://wiki.ubuntu.com/KQEmu - see also !qvm86	05:58
FusionXN1	eyequeue: this ".diff" is a patch to get ym tv tuner to work	05:58
eyequeue	FusionXN1, really, read the page before you go too far	05:58
Terminus	jimmygoon: i installed build-essential, gcc-3.3, and checkinstall. for qemu, ./configure and specify gcc-3.3, make, and then checkinstall. for kqemu, ./configure, make, checkinstall. checkinstall makes me a deb instead of installing files all over the place.	05:58
Dr_Willis	does kqemu give a BIG boost?	05:59
eyequeue	FusionXN1, i've stopped building custom kernels a couple of years back	05:59
FusionXN1	how can i make my tv tuner work then?	05:59
Terminus	Dr_Willis: not really sure anymore. it's been a long time since i ran qemu without it.	05:59
=== synth7 [i=synth@69-164-39-165.atlaga.adelphia.net] has joined #ubuntu
Ademan	can anyone give me a little background on using eclipse + c++ ? how do i build? build project under the projects menu is greyed out. I assume i have create make targets, how do i add one?	05:59
eyequeue	FusionXN1, really, read the page before you go too far, maybe you need to, maybe you don't, maybe you only need a module-assistant run :)	05:59
Terminus	jimmygoon: qemu won't compile with gcc-4.0	06:00
jimmygoon	terminus - do you mind if I irc-equic-pm you	06:00
FusionXN1	eyequeue: i wont then but i dont know how i can get my tv tuner to work then	06:00
eyequeue	FusionXN1, as i said, read the page	06:00
Terminus	jimmygoon: sure. no problem. :)	06:00
FusionXN1	eyequeue: i did i can break my system	06:00
eyequeue	FusionXN1, i know nothing about that hardware, the page should tell you if you need a kernel or not	06:00
Renan_s2	Is anybody here using Xgl? I have a problem: when I press alt-tab, I can't select another window	06:00
eyequeue	FusionXN1, yeah, i loathe television, so i know nothing of that hardware, nor making it work, sorry	06:01
SlyGuy	i can't get XGL to work	06:01
Terminus	jimmygoon: beware, pm is disabled for unregistered users. you're gonna have to register if you want your messages to reach me.	06:01
eyequeue	FusionXN1, to me, it would not be worth the risk	06:01
Dr_Willis	Terminus, i got a amd64 3500+ and qemu is so slow - i cant do much with it other then some dos games. :)	06:01
Geoffrey2	FusionXN1, I'm assuming you've verified that there's no linux driver available for your card?	06:01
eyequeue	FusionXN1, to you, it might be	06:01
Renan_s2	SlyGuy, I got it working, but not with the official tutorial (from the wiki)	06:02
jimmygoon	terminus- I see... I hate IRC (becasue I don't get it :P)	06:02
eyequeue	here's the url again	06:02
eyequeue	!kernel	06:02
ubotu	kernel is the core of the Ubuntu Operating System (named 'Linux'). You shouldn't have to compile one, but if you're convinced you do, see https://wiki.ubuntu.com/KernelCustomBuild	06:02
FusionXN1	Geoffrey2: nope how do i know if there is / anit	06:02
SlyGuy	which did you use?	06:02
Terminus	Dr_Willis: i've got openbsd running in it on my sempron 2500+, and i use it also with slax for my asm experiments. :)	06:02
SlyGuy	it get no windows when i use XGL	06:02
Terminus	jimmygoon: i hate AIM, and MSN, simply because i have to many IM accounts already. XD	06:02
FusionXN1	Geoffrey2: my tv tuner is shown in device manager but tvtime doesnt show it only s-video	06:02
Dr_Willis	Terminus, i just mainly wan tto use it to test out live cd's but its too slow it seems. :(	06:02
SlyGuy	no titles bars or window borders etc	06:02
Geoffrey2	FusionXN1, what's the brand of the card?	06:03
FusionXN1	Geoffrey2: K-WORLD T-100	06:03
Dr_Willis	Terminus, ive seen Sempron box's with linux for $130 here now. :P tempted to get one.	06:03
jimmygoon	terminus - did you get it now :S	06:03
Terminus	Dr_Willis: i generally don't run GUIs in it coz my box can't handle it, but KDE was just fine last time i started it in SLAX. :)	06:03
=== mekanzoo [n=mekanzoo@222.124.77.51] has joined #ubuntu
FusionXN1	Geoffrey2: ubuntu shows it as: Kworld V-Stream Xpert DVB-T	06:03
Terminus	jimmygoon: yeah, got it. got lots of windows open in IRC. >_<	06:04
Dr_Willis	Terminus, heh - my old laptop - the hd died.. so its a live-cd only box.	06:04
Renan_s2	I would like to see someone selling Pentium 4 or Athlon 64 boxes with Linux	06:04
hintswen	lol	06:04
SlyGuy	hmm i am curious why VMWare server is free now	06:04
Dr_Willis	Renan_s2, check out Monarch Computers.	06:04
Ademan	SlyGuy: don't use XGL, wait for AIGLX, much better	06:04
SlyGuy	AIGLX? never heard of it	06:04
Ademan	its going to become part of XFree86	06:05
Ademan	wheras Xgl is kinda novell saying "we can do it better"	06:05
eyequeue	Ademan, ubuntu has not plans to go to XDeww86 however, right?	06:05
Terminus	Dr_Willis: hahaha. i want an old 386 to play around with. =D	06:05
eyequeue	Ademan, XFree86	06:05
Terminus	SlyGuy: i think they're trying to go for the try before you buy marketing thing.	06:06
eyequeue	Ademan, xserver-xorg for the foreseeable future	06:06
jimmygoon	Ademan - why is that a good thing? xfree86 is "bad" from what I understand	06:06
SlyGuy	if server doesn't have extra overhead i would use it	06:06
Ademan	eyequeue: regardless... the fact that its being adopted by a project says something	06:06
jimmygoon	SlyGuy: vmware is free because vmware is scared of Xen	06:06
Ademan	jimmygoon: huh? where did you hear that?	06:07
eyequeue	jimmygoon, eveil licensing, and now the abandonment of most of the OSS community support, i'd agree :)	06:07
SlyGuy	Xen?	06:07
Ademan	i'm not saying its wrong... but i hadn't heard it	06:07
Renan_s2	The problem is that Xen requires a custom kernel on the guest, I think	06:07
Dr_Willis	Terminus, had one. gave it away	06:07
Dr_Willis	:)	06:07
=== wachunei [n=wachunei@101-38-89.adsl.terra.cl] has left #ubuntu []
Dr_Willis	Terminus, want a serial terminal?	06:07
jimmygoon	ademan - check what eyequeue said right below you	06:07
FusionXN1	Geoffrey2: any luck?	06:07
eyequeue	Ademan, recent history in the FOSS community, over the past few years, almost all distros have dropped it like a rock	06:07
Renan_s2	XGL rocks, but I prefer my normal desktop :)	06:08
Terminus	Dr_Willis: shipping to my location is expensive. >_<	06:08
DavidJaq	wow... connecting to my linux install through ssh so I can control it from across the room is fun	06:08
FusionXN1	eyequeue: will downloading and installing them packages of effected my system?	06:08
Ademan	eyequeue: oh... my bad, but either way, AIGLX is being developed openly, instead of this XGL behind closed doors crap	06:08
Terminus	Dr_Willis: i'd like one though. hehe	06:08
move	how come when I install apache it puts a folder in /var/www/ but when I type http:\\localhost even though apache is running it doesn't show me a page?	06:08
jimmygoon	davidjaq- does that mean you got it working? I just expeienced the fun of ssh today :)	06:08
Asc	DavidJaq++	06:09
Ademan	move: uh, is there anything in that folder?	06:09
DavidJaq	jimmygoon, no, not yet, but it's getting there.	06:09
=== BrUtAlls [n=Unix@82.208.193.253] has joined #ubuntu
eyequeue	Ademan, xgl is closed source, non-free? i had not known	06:09
=== BrUtAlls [n=Unix@82.208.193.253] has left #ubuntu []
eyequeue	FusionXN1, not unless one was linux-image-*	06:09
move	Ademan: yes, it makes default indexes	06:09
jimmygoon	I don't think its nonfree or "closed" but its not as quote-unquote open as aiglx has been	06:09
Ademan	eyequeue: its not nonfree, but a big portion of its development was done behind closed doors	06:09
SlyGuy	dropped what like a rock?	06:09
FusionXN1	eyequeue: i dunno - nevermind	06:10
eyequeue	SlyGuy, XFree86	06:10
Ademan	ie: without community review	06:10
=== perkin [i=daemon@200.80.53.243] has joined #ubuntu
timalot	i like it how it defaults to a novell logo on top the cube....	06:11
move	how come when I install apache it puts a folder in /var/www/ but when I type http:\\localhost even though apache is running it doesn't show me a page?	06:11
=== kn_ [n=chatzill@adsl-68-127-123-33.dsl.frsn02.pacbell.net] has joined #ubuntu
DarkMageZ	xgl discussion in #ubuntu-xgl thank you	06:11
perkin	Hi, i'm trying to solve a problem with a WinModem called Motorola SM 56 .. Do you know where i can find the correct driver for a 2.6 kernel?	06:11
eyequeue	anyone interested, /list #ubuntu-xcl, and then /join #ubuntu-xgl :)	06:11
Terminus	!sm56	06:12
ubotu	I know nothing about sm56 - try searching http://bots.ubuntulinux.nl/factoids.cgi?db=ubuntu	06:12
=== BazziR [n=Bastian@p50803C7E.dip0.t-ipconnect.de] has joined #ubuntu
=== J-_ [n=justin@toronto-HSE-ppp4312394.sympatico.ca] has joined #ubuntu
eyequeue	DarkMageZ, i considered it a "no we don't support xf86" conversation :)	06:12
perkin	thanks a lot	06:12
J-_	mmm system/external hard drive working perfect =D	06:12
DarkMageZ	eyequeue, oh, sorry, i only caught the last bits of the conversation (which involved xgl)	06:13
=== deeghetal [n=brian@c-68-61-213-73.hsd1.mi.comcast.net] has joined #ubuntu
deeghetal	how do i change my default startup thingy from GNOME to Kubuntu	06:14
=== facugaich [n=facugaic@host165.201-252-173.telecom.net.ar] has joined #ubuntu
eyequeue	DarkMageZ, yeah, i was already trying to get freenode to cooperate to /list that, so i could verify it's the one i was thinking of :) before sending anyone, lol	06:14
=== lukasz23 [n=lukasz23@gw-ww.telsten.com] has joined #ubuntu
=== perkin [i=daemon@200.80.53.243] has left #ubuntu []
=== ck3k [n=ck3k@adsl-71-131-193-245.dsl.sntc01.pacbell.net] has joined #ubuntu
=== scabootssca [n=jason@dsl-gerl-135-21.fidnet.com] has joined #ubuntu
jimmygoon	deeghetal - I think you could just do something like "sudo aptitude install ubuntu-desktop"	06:15
FusionXN1	how do you uninstall a program	06:15
jimmygoon	or "sudo aptitude reinstall gdm" or something like that	06:15
eyequeue	FusionXN1, example: sudo dpkg --purge foo	06:15
timalot	anyone know where the netstatus applet gets it's pixmaps from?	06:16
jimmygoon	FusionXN1 - if it was installed with synaptic it can be removed by synaptic or CLI: "sudo aptitude remove foobar"	06:16
FusionXN1	eyequeue: well i dont know what it was i did sudo apt-get install tvtime	06:16
eyequeue	FusionXN1, sudo dpkg --purge tvtime, then	06:16
jimmygoon	"sudo aptitude remove tvtime"	06:16
jimmygoon	why dpkg --purge?	06:16
FusionXN1	eyequeue: thanks for your time :)	06:16
Asc	deeghetal: After installing it, restart and when the login screen comes up, find a 'change session' option somewhere. Select kde, log in, and when it asks, tell it to use KDE as default.	06:16
eyequeue	jimmygoon, he doesn't want to keep all the conffiles, does he?	06:16
eyequeue	FusionXN1, no prob	06:17
deeghetal	asc: thanks!	06:17
jimmygoon	I dunna :P	06:17
FusionXN1	eyequeue: gonna try see if mythtv finds my tuner	06:17
jimmygoon	could you do "sudo aptitude purge tvtune" or whateer the package was	06:17
jimmygoon	would that do the same thing?	06:17
eyequeue	jimmygoon, anyway, that's one big difference netween the two commands, plus dpkg is loverlevel	06:18
sarra_	I got Ubuntu to install using alternate	06:18
=== BioticPro [n=vigilant@pool-71-106-129-51.lsanca.dsl-w.verizon.net] has joined #ubuntu
=== Dial_tone_ [n=steve@ip68-4-102-155.oc.oc.cox.net] has joined #ubuntu
sarra_	Before I could get alternate burned, I learned a new command: coaster -w!	06:18
eyequeue	jimmygoon, probably the same results but burning a bit more resources, if someone analyzed the difference lol	06:18
=== Dial_tone [n=steve@ip68-4-102-155.oc.oc.cox.net] has joined #ubuntu
jimmygoon	what do you mean by "lowerlevel?	06:19
FusionXN1	eyequeue: when i right click a mp3 and goto open with AmaroK is shown twice can i remove one?	06:20
=== aboutblank [n=xxx@c-69-138-194-105.hsd1.md.comcast.net] has joined #ubuntu
jimmygoon	Does anyone have any good guides or ways of explaining linux's boot process cause its ones of those things that is still a great mystery to me :S	06:20
jimmygoon	!boot	06:20
ubotu	Boot options: https://wiki.ubuntu.com/BootOptions To add/remove startup services, you can use the package 'bum', or update-rc.d - To add your own startup scripts, use /etc/rc.local See also !grub and !dualboot - Making a bootfloppy: https://wiki.ubuntu.com/GrubHowto/BootFloppy - Also see https://wiki.ubuntu.com/SmartBootManagerHowto	06:20
=== Dr_Willis [n=willis@74.132.83.197] has left #ubuntu ["Leaving"]
=== nomasteryoda [n=nomaster@ip24-252-193-86.mc.at.cox.net] has joined #ubuntu
=== Locke [n=Admin@c-24-129-221-232.hsd1.fl.comcast.net] has joined #ubuntu
eyequeue	FusionXN1, probably, but i'd be careful until you know what's causing the second, you're still learning, heh	06:20
=== PORDO [n=BROKEN@67-40-251-7.ptld.qwest.net] has joined #UBUNTU
FusionXN1	ill reboot later :)	06:20
Locke	how do i have my server login at bootup using CLI?	06:20
Geoffrey2	FusionXN1, there appears to be instructions in the Ubuntu support forum that could show you how to properly set up your card....but I'm simply too new at Linux in general to make sense of them....you might want to find someone else who's more adept at Ubuntu to guide you through what needs to be done	06:20
FusionXN1	Geoffrey2: can you link me to the page?	06:21
aboutblank	hello there! I just got ubuntu for PPC on my G5 (64 bit). it took me forever to get a tool to just do md5 hashing! is md5 a standard package/built in command in 32 bit i386 ubuntu? i had to download a package called "md5deep"	06:21
=== BWD [n=bdotson@pdpc/supporter/student/bdotson] has joined #ubuntu
=== ernz [n=ernz@217.17.112.189] has joined #ubuntu
ernz	Hi again peeps	06:21
FusionXN1	hi	06:22
ernz	I am in customising over-drive at the moment. Is there any way to change the Ubuntu stock boot screen?	06:22
aboutblank	system - admin - login windows	06:23
FusionXN1	dam i cant get mythtv to work	06:23
BioticPro	What is best osX like docker bar (task/launcher/status) for ubuntu?	06:23
eyequeue	aboutblank, md5sum is part of coreutils yes, so every ubuntu contains it	06:23
Asc	ernz: the orange-on-black one?	06:23
ernz	Im not talking about the splash shown after login. I mean the brown one, showing all the services loading.	06:23
ernz	Asc: Correct.	06:23
ernz	There has to be a way of changing it.	06:24
Asc	ernz: Yes, but it might take a little work	06:24
Geoffrey2	FusionXN1, the forum address is www.ubuntuforums.org...there's no listing for your particular model, but Kworld in general brings up several posts...it could be the solutions will work for your card as well	06:24
aboutblank	eyequeue: ARGH so you're correct... md5sum is the command... argh... why oh why didn't they make a link from md5!?!?!?!?	06:24
ernz	Ubuntu may be an excellent OS, but the brown default UI resembles my toilet.	06:24
ernz	Asc - Please, go on...	06:24
Killeroid	ernz: :p	06:24
fistandantilus	my toilet on a bad day, after a night of drinking	06:25
jimmygoon	ernz - that is funny	06:25
jimmygoon	I must be off... website to build and sleep to be had	06:25
=== tianz [n=ws008@202.95.143.218] has joined #ubuntu
Asc	ernz: I've never done it before, I just know it's possible. I think I can find out how....	06:25
eyequeue	aboutblank, agreed :) but a hint, type md5, and then hit tab twice :)))	06:25
FusionXN1	Geoffrey2: thanks mate	06:25
ernz	I'm not being nasty or anything. But you do have to admit, it looks like it was chosen by a blind salmon...	06:25
aboutblank	eyequeue: dude.. i didn't realize that works for command too! though i suppose it makes sense. thanks	06:25
eyequeue	aboutblank, a handy "memory aid" if you can't remember the whole thing	06:26
ernz	Asc: Any help would be appreciated bud. I have looked myself and game up dry.	06:26
sarra_	lol true ernz	06:26
FusionXN1	What the hell does this mean? E: mythtv-database: subprocess post-installation script returned error exit status 1	06:26
FusionXN1	E: mythtv: dependency problems - leaving unconfigured	06:26
eyequeue	aboutblank, np, anything to make everyone a bit more guru :)	06:26
Asc	enrz: I do know off the top of my head how to disable it entirely	06:26
aboutblank	is there a freenode room dedicated to ppc/macintel users?	06:26
=== samitheberber [n=stb@dsl-217-078-204-143.lohjanpuhelin.fi] has joined #ubuntu
eyequeue	FusionXN1, how did you originally select tvtime for installation?	06:27
ernz	Oh yea - My greeter app crashing problem was finally solved tonight. All I had to so was boot into recovery mode, uninstall and then reinstall the GDM packages and Ubuntu-Desktop.	06:27
FusionXN1	eyequeue: though terminal	06:27
ernz	I don't want to disable it.	06:27
=== Kr0ntab [n=Kr0ntab@unaffiliated/Kr0ntab] has joined #Ubuntu
ernz	Just make it less "Crappy"	06:27
eyequeue	FusionXN1, maybe go back into tha app and see what else is still queued for installation	06:27
=== stef [n=stef@58.163.128.157] has joined #ubuntu
Asc	ernz: keep in mind it might be restricted to 256 colors	06:27
FusionXN1	eyequeue: its gone	06:28
ernz	Asc: That means 155 colours OTHER than brown. I'm happy :)	06:28
ernz	255 :D	06:28
eyequeue	FusionXN1, sudo apt-get --no-act install, to see what it has left :)	06:28
=== Asc chuckles
Asc	I don't think it's that bad.... ;p	06:28
eyequeue	FusionXN1, k	06:28
ernz	Sorry, it's 530 AM and I've been up since 11pm	06:28
FusionXN1	eyequeue: 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.	06:28
Asc	I've made much worse typing mistakes that that tonight	06:29
eyequeue	FusionXN1, perfect	06:29
FusionXN1	mytv wont work	06:29
FusionXN1	mythtv*	06:29
ernz	Asc: Yes. "Mistakes". Hmmm....	06:29
eyequeue	FusionXN1, us that an independent app?	06:29
=== DarkED [n=darked@adsl-146-137-146.clt.bellsouth.net] has joined #ubuntu
eyequeue	FusionXN1, is that	06:29
=== the_mug [n=the_mug@ip72-204-37-248.fv.ks.cox.net] has left #ubuntu ["Ex-Chat"]
=== ryantrip [n=chatzill@c-24-4-32-253.hsd1.ca.comcast.net] has joined #ubuntu
Asc	ernz: I did NOT have relations with that woman....	06:29
FusionXN1	eyequeue: E: mythtv-database: subprocess post-installation script returned error exit status 1	06:29
FusionXN1	E: mythtv: dependency problems - leaving unconfigured	06:29
eyequeue	FusionXN1, not part of tvtime's dependencies?	06:30
diesel	Is there a way to get a minimal install from the desktop CD?	06:30
FusionXN1	eyequeue: before that error it says error in mythtv package	06:30
eyequeue	FusionXN1, anually purge any of those you don't need	06:30
sarra_	Yaaay, everything's installed	06:30
eyequeue	FusionXN1, manually	06:30
ernz	Asc << lol - I love the American government	06:30
Asc	ernz: requirements for splash images (probably)	06:30
Asc	1. xpm.gz file type	06:30
Asc	2. 640x480	06:30
Asc	3. 14 colors only	06:30
ryantrip	i just pluged in my monitor in my laptop, but i dont know how to use. i figured i could just plug it in. what do i do?	06:31
ernz	14..... :\|	06:31
Asc	colors \| yikes	06:31
ernz	That would explain the brown	06:31
FusionXN1	eyequeue: what do you mean	06:31
ernz	>> http://www.digg.com/linux_unix/Down_with_Brown_-_Changing_Login_Splash_Screen_on_Ubuntu_Dapper_Drake	06:31
ernz	Hey that's a very good point	06:31
eyequeue	FusionXN1, dpkg --purge mythtv	06:31
=== elamericano [n=elameric@69-12-172-11.dsl.static.sonic.net] has joined #ubuntu
ernz	It could be worse that "crap"-brown	06:31
ernz	I could be suffering snow blindness from using a MAC!!!!	06:32
ernz	ARGGGHH!!!! MY EYEEEEES!	06:32
FusionXN1	eyequeue: SUDO dpkg --purge mythtv - it said: (Reading database ... 95721 files and directories currently installed.)	06:32
FusionXN1	Removing mythtv ...	06:32
eyequeue	FusionXN1, and if they are things you need, then sudo apt-get --reinstall install mythtv-database mythtv	06:32
ernz	Hehe - Ace.	06:32
sarra_	Oh crap	06:32
sarra_	It installed, but the GUI isn't loading	06:32
FusionXN1	eyequeue: still get: E: mythtv-database: subprocess post-installation script returned error exit status 1	06:32
FusionXN1	E: mythtv: dependency problems - leaving unconfigured	06:32
=== dad [n=dad@cpe-74-70-37-83.nycap.res.rr.com] has joined #ubuntu
eyequeue	FusionXN1, another thing to try is sudo apt-get install -f, and see what it wants to do	06:33
Asc	ernz: there's apparently some splash images that can be used here: http://ruslug.rutgers.edu/~mcgrof/grub-images/images/	06:33
FusionXN1	eyequeue: Errors were encountered while processing:	06:33
FusionXN1	mythtv-database	06:33
FusionXN1	mythtv	06:33
FusionXN1	E: Sub-process /usr/bin/dpkg returned an error code (1)	06:33
=== doughboy [n=paul@245-91.124-70.tampabay.res.rr.com] has joined #ubuntu
=== Renan_s2 [n=Renan@201.47.220.201] has joined #Ubuntu
sarra_	Okay, this is really strange	06:33
eyequeue	FusionXN1, somewhere above those E: lines are the real errors, why mythiv-database fails in the postinst	06:34
sarra_	I have no video on my screen, but I can login?	06:34
Asc	and a guide here: http://ruslug.rutgers.edu/~mcgrof/grub-images/ which is what I should really have linked to	06:34
tritium	FusionXN1: don't paste please	06:34
ernz	blanpem writes:- "I really like the brown, i think it is clean looking." << This boy is 2 kinds of stupid!	06:34
ryantrip	i just pluged in my monitor in my laptop, but i dont know how to use. i figured i could just plug it in. what do i do?	06:34
FusionXN1	tritium: how can i show error message?	06:34
tritium	ernz: be nice	06:34
tritium	FusionXN1: pastebin	06:34
eyequeue	!pastebin > FusionXN1	06:34
=== freakzoid0223 [n=matt@pool-151-197-240-175.phil.east.verizon.net] has joined #ubuntu
ernz	tritium: Say what?	06:34
FusionXN1	k 1 mo	06:34
doughboy	Anyone running RealBasic here?	06:35
tritium	ernz: what part are you confused about?	06:35
sarra_	Is there a command to reboot Ubuntu?	06:35
FusionXN1	eyequeue: http://paste.ubuntu-nl.org/19140	06:35
=== linlin [i=linlin@c-67-184-230-25.hsd1.il.comcast.net] has joined #ubuntu
sarra_	I need to be able to do it without seeing anything on the screen	06:35
tritium	sarra_: sudo reboot	06:35
=== Versed [n=Versed@c-69-253-173-154.hsd1.nj.comcast.net] has left #ubuntu ["Leaving"]
ernz	Who am I supposed to be being nice to exactly?	06:35
sarra_	I can't see what is on the screen, I'm going to need a key command to use from the desktop	06:35
=== br1 [n=br1@user-142h17d.cable.mindspring.com] has joined #ubuntu
=== fistandantilus [n=skavenge@12-207-61-84.client.mchsi.com] has left #ubuntu []
FusionXN1	eyequeue: i forgot it says: Failed to create database (incorrect admin username/password?)	06:36
eyequeue	sarra_, enter enter sudo reboot enter :)	06:36
Asc	ernz: the people who like the brown	06:36
aboutblank	does anyone use the PPC version?	06:36
eyequeue	sarra_, then your user password	06:36
=== ravenous [n=skavenge@12-207-61-84.client.mchsi.com] has joined #ubuntu
tritium	aboutblank: sure	06:36
ernz	Asc > What people would this be?	06:36
=== phlexy [n=ben@60-234-226-178.bitstream.orcon.net.nz] has joined #ubuntu
tritium	ernz: please drop it	06:36
sarra_	eyequeue: I can't see anything on the screen, there's no way I can open a console	06:36
=== roostishaw [n=roostish@c-24-126-92-199.hsd1.ca.comcast.net] has joined #ubuntu
=== p47 [n=p47@201.152.33.11] has left #ubuntu ["Leaving"]
Asc	ernz: the blanpem you quoted, apparently	06:37
ryantrip	hey i need help. i just pluged in my monitor in my laptop, but i dont know how to use. i figured i could just plug it in. what do i do?	06:37
aboutblank	tritium: I'm going to go out on a limb here and assume there's no way to get 3d acceleration on ppc? nvidia card.	06:37
eyequeue	sarra_, alt-ctrl0f1, then login at the console	06:37
eyequeue	sarra_, username enter password enter	06:37
Asc	ernz: anyway, did you get that link? The easy directions are down about halfway down the page, Instructions->1.1	06:37
ernz	lmao!! Bloody #channel do gooders. be quiet tritium. I was talking to my good buddy Asc here, he's helping me with an issue.	06:37
ernz	And yes Asc, looks very promising	06:38
=== rxknmi1 [n=rxknmir@210.4.12.193] has left #ubuntu []
eyequeue	FusionXN1, thank you, that's the real error, you dind't set up that db	06:38
tritium	ernz: don't act that way here again please	06:38
ernz	I found another one on Digg.com > It shows the quiet option for the booter	06:38
tritium	!conduct > ernz	06:38
FusionXN1	eyequeue: fixed it	06:38
ernz	Shh.	06:38
=== samalex [n=samalex@pdpc/supporter/student/rlangly] has joined #ubuntu
=== LogicalDash [n=chatzill@ip68-5-227-114.oc.oc.cox.net] has joined #ubuntu
samalex	hey guys --	06:38
eyequeue	FusionXN1, it seems that package (and all that later depend on it) require that first	06:38
roostishaw	anyone, how can i append a certain line to a file that the crrent user does not own?	06:38
ernz	Asc: you say you modded b4, or not?	06:38
=== mode/#ubuntu [+o tritium] by ChanServ
=== mode/#ubuntu [+b %!@217.17.112.189] by tritium
=== mode/#ubuntu [-o tritium] by tritium
=== phlexy [n=ben@60-234-226-178.bitstream.orcon.net.nz] has joined #ubuntu
Asc	ernz: I haven't, but I'm going to now that I know how	06:38
Asc	ernz: I've messed about with the *lst file it mentions a bit, it looks like it should be easy	06:39
ryantrip	does anyone know how to set up another screen with ur laptop?	06:39
eyequeue	roostishaw, own? or have write permissions for?	06:39
eyequeue	ryantrip, ^A^C, while in screen	06:39
roostishaw	eyequeue, have write permissions for. all within a bash script... so i need one command...	06:40
verbose	how can i install the 32-bit version of libgtk-1.2 on an amd64 machine?	06:40
eyequeue	roostishaw, do they have +w? even as group or other?	06:40
roostishaw	eyequeue, they dont have write permissions, only read.	06:40
LogicalDash	Hi guys, I'm trying to install a 3D driver for my Radeon 9700 and not having much luck	06:41
eyequeue	roostishaw, echo "line goes here" >> filename, but they would need +w	06:41
roostishaw	eyequeue, im writing a bash script that needs to edit a file	06:41
ryantrip	eyequeue: i dont understand, im net to linux. just rcently installed it	06:41
=== kenny [n=kenny@pool-71-108-103-4.lsanca.dsl-w.verizon.net] has joined #ubuntu
roostishaw	eyequeue, and thats the problem	06:41
eyequeue	roostishaw, without +w, they can't do anything	06:41
kenny	i can do anything	06:41
roostishaw	eyequeue, there's not awk command?	06:41
roostishaw	eyequeue, or something i could do with sudo?	06:41
eyequeue	ryantrip, you are not running the application called "screen" then?	06:41
FusionXN1	eyequeue: i got another error: http://paste.ubuntu-nl.org/19141	06:41
=== opticline [i=opticlin@71.83.117.100] has joined #ubuntu
gavagai	if you want to append a line he gave you the correct command	06:42
=== dek_aik [n=okto@203.81.186.207] has joined #ubuntu
gavagai	permissions are the problem	06:42
eyequeue	roostishaw, sudo echo linegoeshere >> filename	06:42
Locke	how do i have my server login at bootup using CLI?	06:42
LogicalDash	Does it work to just use Alien on their RPM package for the driver?	06:42
eyequeue	roostishaw, if you do it as sudo, you bypass all the permissions	06:42
opticline	what isnt supported in the AMD64 version of UBUNTU>?	06:42
gavagai	why can't you put the user in a group that has write permission on the file	06:42
=== Ademan [n=dan@h-69-3-234-229.snfccasy.dynamic.covad.net] has joined #ubuntu
=== Frankenstein [n=josh@unaffiliated/frankenstein] has joined #ubuntu
eyequeue	roostishaw, what gavagai said, even if it's a onetime group	06:43
roostishaw	eyequeue, hmm... not really: "bash: /etc/apt/sources.list: Permission denied	06:43
Frankenstein	can someone give me the link on how to reconfigure x	06:43
Frankenstein	!x	06:43
ubotu	x is the X Window System; it's the part of your system that's responsible for graphical output. To restart your X, type this in a console: sudo /etc/init.d/?dm restart - To fix screen resolution or other X problems: http://wiki.ubuntu.com/FixVideoResolutionHowto	06:43
Frankenstein	thanks :)	06:43
FusionXN1	What should the I.P. be for a mysql database	06:44
=== nautilux [n=nautilux@201.201.3.238] has joined #ubuntu
=== fivre_ is now known as fivre
tritium	FusionXN1: depends. Is it on the localhost machine?	06:44
nautilux	hi	06:44
nautilux	i need help please	06:45
Frankenstein	with	06:45
Frankenstein	ask?	06:45
FusionXN1	tritium: yes and its for mythtv	06:45
nautilux	i just have install ubuntu and erase windows...	06:45
tritium	nautilux: please state the question	06:45
=== kenny_ [n=kenny@pool-71-108-103-4.lsanca.dsl-w.verizon.net] has joined #ubuntu
eyequeue	FusionXN1, any, but 127.0.0.1 is probable	06:45
tritium	FusionXN1: 127.0.0.1, then	06:45
nautilux	i have 2 hd	06:45
=== Ribs [n=ribs@riblet.plus.com] has joined #ubuntu
=== zerdith [n=zerdith@24-231-172-162.dhcp.bycy.mi.charter.com] has joined #ubuntu
FusionXN1	tritium: 1 mo	06:45
nautilux	and i cant acces to one	06:45
Frankenstein	nautilux: try one line, not 5	06:45
nautilux	it says error	06:45
=== DarkED [n=darked@adsl-146-137-146.clt.bellsouth.net] has joined #ubuntu
kenny_	wats the defualy location of firefox?	06:45
tritium	FusionXN1: huh?	06:45
Asc	ernz: I'm off to test if it works. If you have problems, I'll be back in a few minutes.	06:46
=== minto [n=gfarr@74.132.208.217] has joined #ubuntu
ryantrip	eyequeue: i dont see a program called screen	06:46
Frankenstein	/usr/lib/firefox/firefox-bin	06:46
eyequeue	screen (1) - screen manager with VT100/ANSI terminal emulation	06:46
nautilux	I can play all the games like warcraft,cod,diablo in ubuntu?	06:46
eyequeue	ryantrip, don't worry, you didn't install it, it's not what your question was about i assume	06:46
kenny_	WARNING: /usr/lib/firefox/firefox-bin is not a directory.	06:46
kenny_	im trying to install flaash 7	06:46
tritium	kenny_: install the ubuntu package, then	06:47
eyequeue	ryantrip, if you don't have it, you sure were not asking some detail about it :)	06:47
tritium	You don't have ot know where firefox is located to install it	06:47
eyequeue	ryantrip, re-ask?	06:47
kenny_	didnt know there was one	06:47
kenny_	is there a ubuntu package for java/	06:47
eyequeue	ryantrip, extra monitors?	06:47
elamericano	synic, I almost got your screenshot, but I was wondering how you display the file list on the left.	06:47
aboutblank	64 bit PPC ubuntu - I'm trying to compile RainbowCrack. i get an "unknown register name '%eax' in 'asm'" error. Since this is processor register, am i right in saying there's no way for me to compile this?	06:48
=== kj [n=hgf@219.83.63.50] has joined #ubuntu
tritium	kenny_: yes, sun-java5-jre, for example	06:48
eyequeue	ryantrip, something called xinerama may be what you want	06:48
synic	elamericano: that would be project.vim	06:48
=== mauhur [n=nobody@201009097229.user.veloxzone.com.br] has joined #ubuntu
eyequeue	!xinerama	06:48
ubotu	xinerama is using multiple monitors as one big monitor. See https://wiki.ubuntu.com/XineramaHowTo	06:48
synic	elamericano: my favorite plugin	06:48
eyequeue	ryantrip, see ubotu above, if so	06:48
elamericano	Ah thanks. This was my shot: http://img207.imageshack.us/img207/9426/screenshotjd0.gif	06:48
=== anonymeeee [n=imatech@c-24-10-92-186.hsd1.ca.comcast.net] has joined #ubuntu
tritium	kenny_: there's some info on flash in your help system, or on the wiki	06:48
=== Dial_tone [n=steve@ip68-4-102-155.oc.oc.cox.net] has joined #ubuntu
kenny_	meh	06:50
kenny_	im having trouble watching you tube videos	06:50
=== fyrestrtr [n=burhan@mail.am-ul.com] has joined #ubuntu
ryantrip	eyequeue: i dont want to use 2 screens as one big monitor, i want to set the default screen to me external one	06:50
synic	elamericano: sweet. perl programmer, eh?	06:50
=== appolusionist_ [n=appolusi@cpe-72-130-201-17.hawaii.res.rr.com] has joined #ubuntu
=== harry [n=harry@124.104.1.126] has joined #ubuntu
anonymeeee	how do i know if samba is running on my box?	06:51
FusionXN1	tritium: still error...	06:51
eyequeue	ryantrip, a bios thing? sounds like it might be a "turn on external port turn off internal card" thing	06:51
FusionXN1	tritium: http://paste.ubuntu-nl.org/19142	06:51
harry	how do i mount dev/hdc1? i'm backing up my files	06:51
=== DavidJaq sighs
move	exit	06:51
anonymeeee	I'm trying to set up a print server	06:51
elamericano	synic, whatever pays the bills. C programmer originally.	06:51
DavidJaq	Ok... I've followed everything in this tutorial and I can't get the samba server to work :(	06:52
=== capgadget [n=elifino@adsl-69-149-43-249.dsl.rcsntx.swbell.net] has joined #ubuntu
=== srikat [n=sri@59.92.196.127] has joined #ubuntu
synic	elamericano: I feel the same way. Perl currently pays all of my bills, though it's definitely not my favorite.	06:52
ryantrip	eyeqyeue: im surprized ubuntu doest have a built in gui tool for it	06:52
anonymeeee	that's not very encouraging	06:52
harry	ic56	06:52
eyequeue	ryantrip, if it's your bios, that would be hardware-specific, not at the os level	06:53
=== mauhur [n=nobody@201009097229.user.veloxzone.com.br] has joined #ubuntu
harry	how do i mount dev/hdc1? i'm backing up my files	06:53
eyequeue	harry, what fs, what mountpoint?	06:53
=== mitsuhiko [n=blackb1r@ringmaster.active-4.com] has joined #ubuntu
harry	eyequeue: what do you mean what mountpoint???	06:54
eyequeue	harry, sudo mount -t something /dev/hdc1 /mountpoint/here	06:54
aboutblank	harry.. first.. mkdir /mnt/thisdrive	06:54
=== capgadget [n=elifino@adsl-69-149-43-249.dsl.rcsntx.swbell.net] has joined #ubuntu
eyequeue	harry, man mount, you'll see	06:54
=== dek_aik [n=okto@203.81.186.207] has joined #ubuntu
aboutblank	eyequeue can't mount automatically detect the fs if you leave out the -t?	06:55
ryantrip	eyequeue: usualy in an os when yopu have a laptop, when u plug in a screen, u can choose how you want to set it up. settings like which screen is the defefault, use only one screen, or other options.	06:55
DavidJaq	I can see my linux install in my network places on my windows machine but when I try to double click on it I get 'the network path was not found'	06:55
FusionXN1	eyequeue: http://paste.ubuntu-nl.org/19142 still says 127.0.0.1 / locahost is wrong ip	06:55
eyequeue	aboutblank, mine usually does but every time i tell someone to omit it, there's doesn't for some reasn, sigh	06:55
aboutblank	lol	06:55
=== mindseye [n=ryan@c-68-40-138-244.hsd1.mi.comcast.net] has joined #ubuntu
FusionXN1	do i need to open 6543 on my router?	06:56
eyequeue	ryantrip, "usually"? i've never seen that	06:56
mindseye	hello, is this the Ubuntu support chat?	06:56
harry	aboutblank: what do you mean mkdir. /mnt/thisdrive	06:56
DavidJaq	yes, mindseye	06:56
=== fausto_ [n=fausto@adsl-9-151-55.mia.bellsouth.net] has joined #ubuntu
ryantrip	eyequeue: on windows and on mac you can set up muiltiple monitors	06:57
mindseye	i have a quick question about a custom menu icon i am trying to make	06:57
aboutblank	harry: do "mkdir /mnt/drive"	06:57
eyequeue	ryantrip, i don't use those, sorry	06:57
tritium	ryantrip: you can use multiple monitors on linux too	06:57
eyequeue	FusionXN1, what db daemon?	06:57
harry	aboutblank then what	06:57
ryantrip	tritium: can you help me with it? i dont know how to make it work	06:58
FusionXN1	eyequeue: mythtv website says mysql may not be started	06:58
mindseye	for the 'command' of the icon I want to change the directory and then execute the command in one step. any ideas?	06:58
FusionXN1	eyequeue: how can i check	06:58
eyequeue	tritium, he wants to disable the oinboard laptop one and make the external the primary	06:58
=== mitsuhiko [n=nblackb1@ringmaster.active-4.com] has joined #ubuntu
=== satyambabu [n=satyamba@dialpool-210-214-44-20.maa.sify.net] has joined #ubuntu
fausto_	Hi. I'm using VMWare server with ubuntu and am running WIndows XP as a virtual disk. I can't access the internet on xp and I can't get vmware tools to run properly.	06:58
eyequeue	FusionXN1, mysql then :)	06:58
aboutblank	harry: "mount /dev/hdc1 /mnt/driv"	06:58
fausto_	I've installed it and when I reboot it won't run.	06:58
satyambabu	How do I access USB device ??	06:58
aboutblank	harry: oops add an E	06:58
=== Asc [n=Asc@206.130.142.87.nwinternet.com] has joined #ubuntu
ryantrip	eyequeue: or use both, one as primary, one as the 2nd one	06:58
fausto_	It just says "VMWare tools not running." and shows a red cross over it	06:58
eyequeue	FusionXN1, do you have it configured to listen on that port? from localhost?	06:59
FusionXN1	its default you cant edit the port	06:59
fausto_	Any ideas?	06:59
tritium	harry: this drive you're trying to mount might be nice to mount in /media, rather than /mnt	06:59
=== kj [n=hgf@219.83.63.50] has joined #ubuntu
eyequeue	FusionXN1, do you have it configured to listen on that port? from localhost?	06:59
Dravas	What is the easiest way to install Java	06:59
FusionXN1	eyequeue: i anit touched mysql till now	06:59
FusionXN1	and it did it automatically	06:59
ryantrip	tritium: can you help me set up my laptop with another screen?	06:59
FusionXN1	so i guess not	07:00
tritium	Dravas: use the sun-java5 packages in ubuntu	07:00
harry	aboutblank: where can i find mnt now??	07:00
eyequeue	FusionXN1, telnet localhost 6543	07:00
mindseye	this website has info on java install: http://ubuntuguide.org	07:00
tritium	ryantrip: which chipsset?	07:00
=== Amaranth [n=travis@ubuntu/member/amaranth] has joined #ubuntu
FusionXN1	eyequeue: telnet: Unable to connect to remote host: Connection refused	07:00
eyequeue	FusionXN1, times out, or asks for something?	07:00
tritium	mindseye: please don't recommend ubuntuguide	07:00
harry	ok i'm alright thanks aboutblank	07:00
ryantrip	tritium: chipset? what do u mean	07:00
mindseye	oh sorry. is it not a good reference?	07:00
eyequeue	FusionXN1, okay, you have no listener there, as i suspected	07:00
tritium	ryantrip: nvidia, at, or what?	07:00
FusionXN1	eyequeue: You da man! continue..	07:01
tritium	mindseye: the wiki, usually, or help.ubuntu.com	07:01
ryantrip	tritium: ahh let me see	07:01
verbose	how can i install the 32-bit version of libgtk-1.2 on an amd64 machine?	07:01
mindseye	oh ok	07:01
fausto_	So anyone know why VMWare tools wouldn't run?	07:01
tritium	java help is even in System->Help	07:01
eyequeue	FusionXN1, your underlying issue is to configure your mysql-daemon	07:01
tritium	!java	07:01
ubotu	java is an object oriented programming language. To install a java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java For the Sun Java runtime install sun-java5-jre from the Multiverse repository	07:01
FusionXN1	eyequeue: sudo mysql?	07:01
eyequeue	FusionXN1, i'm just winging this part, but try sudo dpkg-reconfigure mysql-daemon	07:02
mindseye	is there anyone specific i could talk to about making a menu icon?	07:02
verbose	FusionXN1: you don't need sudo to run mysql, you can use mysql -u root	07:02
kj	f	07:02
FusionXN1	eyequeue: Package `mysql-daemon' is not installed and no info is available.	07:02
eyequeue	verbose, yeah, but i don't want him in mysql, i want him on the outside doing the initial configuration	07:02
ryantrip	tritium: nvidia Georce2 Go	07:02
verbose	eyequeue: aah	07:02
verbose	gotcha	07:02
tritium	ryantrip: are you using the proprietary driver?	07:03
=== ompaul [n=ompaul@ubuntu/member/ompaul] has joined #ubuntu
ryantrip	tritium: i dont undrestand. im new to linux :P	07:03
eyequeue	FusionXN1, okay, you have something called mysql-server-something installed, what is "something"?	07:04
tritium	ryantrip: no problem. Have you tried the easiest thing? Your laptop should have a key-combo to switch between displays (perhaps Fn-F5, as on mine)	07:04
mindseye	if I were at a command prompt	07:05
mindseye	how would i do a "CD" and execute a command on the same line?	07:05
FusionXN1	eyequeue: mysql-server-5.0 ?	07:05
eyequeue	FusionXN1, 5.0? 4.1?	07:05
FusionXN1	eyequeue: 5.0	07:05
eyequeue	FusionXN1, okay :)	07:05
=== kj [n=hgf@219.83.63.50] has left #ubuntu []
eyequeue	FusionXN1, sudo dpkg-reconfigure mysql-daemon-5.0	07:06
=== kj [n=hgf@219.83.63.50] has joined #ubuntu
ryantrip	tritium: i have that little screen symble on it but i dont think its working	07:06
FusionXN1	eyequeue: Package `mysql-daemon-5.0' is not installed and no info is available.	07:06
tritium	ryantrip: you've tried it?	07:06
eyequeue	FusionXN1, it should ask a bunch of things via debconf	07:06
eyequeue	FusionXN1, sudo dpkg-reconfigure mysql-server-5.0	07:06
FusionXN1	eyequeue: nope just restarted	07:07
eyequeue	FusionXN1, you want to enable queries over the network, and from localhost / 127.0.0.1	07:07
=== Clone [n=ragnar@cpc2-blac3-0-0-cust584.manc.cable.ntl.com] has joined #ubuntu
=== kj [n=hgf@219.83.63.50] has left #ubuntu []
FusionXN1	eyequeue: says something about etc/hosts/	07:08
=== ssjgolleta_ [n=ssjgolle@ip68-228-196-17.ph.ph.cox.net] has joined #ubuntu
eyequeue	anyone here know offhand which mysql-* postinst asks about enabling net commections or not?	07:08
fausto_	Anyone here know stuff about VMWaere?	07:10
fausto_	Preferably about why vmware tools won't start?	07:10
=== mr_lampe [n=tho@dslb-084-056-137-213.pools.arcor-ip.net] has joined #ubuntu
=== Hobbsee [n=Hobbsee@ubuntu/member/hobbsee] has joined #ubuntu
=== rikai [n=rikai@pool-72-65-98-46.ptldme.east.verizon.net] has joined #ubuntu
eyequeue	FusionXN1, did you EVER configure mysql?	07:10
FusionXN1	no	07:11
FusionXN1	CRAP amarok has gone mad its flooding me with messages	07:11
eyequeue	FusionXN1, i wonder how you got away with that	07:11
FusionXN1	how do i force close it	07:11
eyequeue	FusionXN1, dpkg -l mysql-server-5.0, and JUST paste the VERY last line here, nothing more	07:11
=== rikai [n=rikai@unaffiliated/rikai] has joined #ubuntu
eyequeue	FusionXN1, does it begin with "ii "?	07:12
=== rikai [n=rikai@unaffiliated/rikai] has left #ubuntu ["Leaving"]
FusionXN1	ii mysql-server-5 5.0.22-0ubuntu mysql database server binaries	07:12
=== jiSh [n=mike@CPE0013460a7ec9-CM00140496b00c.cpe.net.cable.rogers.com] has joined #ubuntu
eyequeue	FusionXN1, it seems to think you configure it, debconf and all	07:12
=== andresmax [n=andresma@pc-222-103-214-201.cm.vtr.net] has joined #ubuntu
=== roler [n=chris@ip68-225-240-62.oc.oc.cox.net] has joined #ubuntu
FusionXN1	eyequeue: nope anit touched it	07:12
andresmax	hello	07:12
mindseye	is it possible to set a "working directory' for an icon in Alacarte?	07:12
=== ArthurBrazil [n=Arthur@c-66-229-214-252.hsd1.ca.comcast.net] has joined #ubuntu
andresmax	:S	07:13
=== ahmeni [i=ahmeni@69.f4.5546.static.theplanet.com] has joined #ubuntu
andresmax	hay alguien que hable espaol ??	07:13
Amaranth	mindseye: err, what do you mean?	07:13
eyequeue	FusionXN1, i'm at the point where i'm confused by conflicting data, perhaps too tired to be of help to you	07:13
ssjgolleta_	yo ablo espanol	07:13
fyrestrtr	mindseye: I think it defaults to /usr/share/icons	07:13
fyrestrtr	!es	07:13
ubotu	Para Espaol por favor usen #ubuntu-es, #kubuntu-es o #edubuntu-es, alli obtendran mas ayuda.	07:13
Amaranth	!es	07:13
eyequeue	!es > andresmax	07:13
FusionXN1	eyequeue: i need to make a port open for the mysql right?	07:13
=== grzesiek [n=grzesiek@router.eia.pl] has joined #ubuntu
mindseye	Amaranth: i need to run my executable from it's own directory or i won't get it's dependencies	07:14
eyequeue	FusionXN1, you open the port by installing a listener on it (that package)	07:14
grzesiek	halloo	07:14
ssjgolleta_	can somebody tell me if they can see anything here 68.228.196.17	07:14
FusionXN1	would reinstalling it allow me to configure it?	07:14
andresmax	hola	07:14
=== QuagMire [n=CHICKEN@CPE0010b5e5fded-CM000f9f7c3c6c.cpe.net.cable.rogers.com] has joined #ubuntu
mindseye	i need to either set a working directory, or change the directory before I execute the command	07:14
andresmax	de donde eres ??	07:14
Amaranth	mindseye: you said for a directory	07:14
eyequeue	FusionXN1, you seem to not have it there, per telnet even, but yet it says you do??	07:14
tritium	!es	07:14
ubotu	Para Espaol por favor usen #ubuntu-es, #kubuntu-es o #edubuntu-es, alli obtendran mas ayuda.	07:14
fyrestrtr	mindseye: you can just write a small script and execute that instead. #!/bin/bash cd /the/directory ./whatever	07:15
=== QuagMire [n=CHICKEN@CPE0010b5e5fded-CM000f9f7c3c6c.cpe.net.cable.rogers.com] has left #ubuntu ["Leaving"]
FusionXN1	eyequeue: i anit touched mysql	07:15
hintswen	ssjgolleta_, The server at 68.228.196.17 is taking too long to respond.	07:15
FusionXN1	eyequeue: didnt need it until now	07:15
andresmax	?????	07:15
ssjgolleta_	thx	07:15
andresmax	?	07:15
eyequeue	FusionXN1, you see my conflicting data and confusion?	07:15
andresmax	cmo ??	07:15
=== mode/#ubuntu [+o Amaranth] by ChanServ
=== andresmax [n=andresma@pc-222-103-214-201.cm.vtr.net] has left #ubuntu [requested]
=== mode/#ubuntu [+b !@pc-222-103-214-201.cm.vtr.net!#ubuntu-es] by Amaranth
=== mode/#ubuntu [-o Amaranth] by ChanServ
mindseye	fyrestrtr: i was going to use that as a last resort. Thought there might be a simpler way	07:15
FusionXN1	eyequeue: yes	07:15
FusionXN1	eyequeue: weird...!	07:15
eyequeue	FusionXN1, i'm hoping someone else here can get your mysql-server-5.0 lostening on localhost	07:15
=== hurax [n=benno@dslb-084-056-224-180.pools.arcor-ip.net] has joined #ubuntu
FusionXN1	Can someone tell me which engine to use with amarok?	07:16
eyequeue	FusionXN1, you'll need to set a "root" password, which should not be a password you use for root or user	07:16
FusionXN1	XINE refuses to cooperate	07:16
fyrestrtr	mindseye: I'm not aware of one, but there might be, who knows. Maybe some variable you can set in the shell or something.	07:16
timalot	what happens when u type mysql?	07:16
=== tianz [n=ws008@202.95.143.218] has joined #ubuntu
FusionXN1	it goes into config	07:16
=== ArthurBrazil [n=Arthur@c-66-229-214-252.hsd1.ca.comcast.net] has left #ubuntu ["Leaving"]
fyrestrtr	FusionXN1: what problem are you having with mysql?	07:17
FusionXN1	well sudo mysql	07:17
eyequeue	FusionXN1, mysql password trans,ission is insecure, so it's not a "safe" password, but you'll need to rememebre it every time you want to make a new db (all packages that depend on mysql)	07:17
FusionXN1	if i do mysql i get: RROR 1045 (28000): Access denied for user 'fusionxn1'@'localhost' (using password: NO)	07:17
timalot	i mean the msql client	07:17
eyequeue	fyrestrtr, it appears to not be listening	07:17
fausto_	Will someone please help me?	07:17
ryantrip	tritium: it doesnt work	07:17
mindseye	fyrestrtr: ok i'll go that route. thanks for the help everyone!	07:17
tritium	ryantrip: ok	07:17
fausto_	I've googled it and it appears noone has had my problem.	07:17
=== SammyXFCE [n=sarabjot@S0106000f3d9e754f.cg.shawcable.net] has joined #ubuntu
fyrestrtr	eyequeue: what have you all tried?	07:17
timalot	FusionXN1, ok u need to add your user to the grant tables	07:18
SammyXFCE	Hey channel.	07:18
fausto_	Apparently noones ever gotten the message "the vmware tools service is not running" . I guess most people just get it working on the first try.	07:18
FusionXN1	timalot: how do i go about doing that	07:18
ryantrip	tritium: i tried a different key f8 and it did somthing but it looked meased up. the key says CRT/LCD	07:18
timalot	FusionXN1, hold on	07:18
FusionXN1	timalot: thanks :)	07:18
eyequeue	fyrestrtr, of significance? just dpkg-reconfigure mysql-server-5.0	07:18
tritium	ryantrip: that's the key	07:18
fyrestrtr	you don't need to do all that, it works out of the box, you just need to set users in it.	07:18
eyequeue	fyrestrtr, confirming no listener, postinsts of other pacakges get no answer when trying to create a db	07:19
ryantrip	tritium: my external said incorrect settings or somthing lol	07:19
hoy	did amd prices go down yet?	07:19
fyrestrtr	have you tried netstat -l \| grep mysql ?	07:19
eyequeue	fyrestrtr, confirming no listener, telnet localhost 6543	07:19
tritium	hoy: on the 24th, to distributors only	07:19
fyrestrtr	6543?!	07:19
fyrestrtr	where did you come up with that port?	07:19
FusionXN1	mythtv	07:19
=== InnerFIRE [n=darnell@dsl254-014-076.sea1.dsl.speakeasy.net] has joined #ubuntu
=== samalex [n=samalex@pdpc/supporter/student/rlangly] has left #ubuntu []