[12:13] as much as I'd like it as well :) [12:14] well, edgy+1 is only 6 months from now :) === zul [n=chuck@ubuntu/member/zul] has joined #ubuntu-kernel [12:15] 'night all [12:16] night ivoks === zul [n=chuck@CPE0006258ec6c1-CM000a73655d0e.cpe.net.cable.rogers.com] has joined #ubuntu-kernel === doko__ [n=doko@dslb-088-073-080-159.pools.arcor-ip.net] has joined #ubuntu-kernel === smurf [n=smurf@debian/developer/smurf] has joined #ubuntu-kernel === BenC [n=bcollins@debian/developer/bcollins] has joined #ubuntu-kernel === gnomefreak [n=gnomefre@ubuntu/member/gnomefreak] has joined #ubuntu-kernel === zul [n=chuck@ubuntu/member/zul] has joined #ubuntu-kernel === BenC [n=bcollins@debian/developer/bcollins] has joined #ubuntu-kernel === Keybuk [n=scott@syndicate.netsplit.com] has joined #ubuntu-kernel [04:58] cool, my jmicron eval board will be here tomorrow afternoon [04:59] means I should have an upload by tomorrow evening [06:20] morning === JanC [n=janc@lugwv/member/JanC] has joined #ubuntu-kernel === Fujitsu [n=Fujitsu@ubuntu/member/fujitsu] has joined #ubuntu-kernel [08:12] zul: yeah, I need to push my changes, sorry. === marcin_ant [n=marcin@aim178.internetdsl.tpnet.pl] has joined #ubuntu-kernel === ivoks [n=ivoks@ubuntu/member/ivoks] has joined #ubuntu-kernel [08:41] 'morning === Lure [n=lure@external-7.hermes.si] has joined #ubuntu-kernel [08:42] Hey ivoks. [08:44] hi Fujitsu [08:46] BenC: 2.6.18's generic.c contains some stuff about jmicron, which our kernel doesn't.... [08:51] ivoks: hi [08:52] hi marcin_ant [08:52] ivoks: I'm not kernel guru and developer - just simple user - but I compiled 2.6.18 (vanilla) on dapper two days ago [08:52] marcin_ant: and? [08:52] ivoks: I hoped that it could fix something with jmicron - and... nothing [08:52] ivoks: this controller didn't work [08:53] hm... [08:53] ivoks: but I'm not sure if I did everything properly [08:53] are you talking about SATA or IDE part of controller? [08:53] ivoks: because there are reports that with 2.6.18 jmicron is operational [08:53] ivoks: IDE [08:54] acording to 2.6.18 source, jmicron IDE controller should work with generic IDE module [08:54] and SATA controller should work with ahci [08:54] sata part is fixed in edgy's kernel [08:54] then I just propably messed something in kernel config [08:54] BenC: we're closing for beta, unless it's _really_ needed, I'd be happier if you made that upload after beta is out. [08:55] ivoks: well it's nice but it doesn't solve problem :( [08:55] i'll test this change in generic, to see if it works [08:55] ivoks: if you got sata DVD/CD then in 90% of cases you don't care about jmicron issue you can just plug drive into ICH8 [08:55] marcin_ant: i know [08:56] but ich8 doesn't work either for me [08:56] ivoks: with sata? [08:56] ich8 sata controller doesn't work for me, right [08:56] ivoks: at all or just with some kind of sata cd/dvd? [08:57] at all [08:57] ivoks: strange... [08:57] marcin_ant: works for you? [08:57] ivoks: I got asus p5b and it works without any problems with sata hdd [08:57] i have p5b too :) [08:57] what's your bios config for ich8? [08:57] ivoks: I'm running dapper on this machine installed via instlux [08:57] i don't care about instlux [08:58] ivoks: now I'm at work so I cannot tell you what is my config in 100% [08:58] ivoks: but tell me what hardware config you got... [08:58] ivoks: asus p5b and what hdd you got? [08:59] wd [08:59] ivoks: sata? [08:59] of course [09:00] ivoks: well it's not so obvious ;) I got 4 drives in my case with p5b and only one is sata... [09:00] ivoks: ok anyway then what else? cd/dvd... sata/ide? [09:00] ivoks: fdd? usb drive? [09:01] marcin_ant: p5b has only one IDE port [09:01] how could you put 3 drivers on one ide port? [09:01] ivoks: sure but I got additional ATA 100 controller on cmd controller [09:02] controller/chipset [09:02] ivoks: on pci [09:02] well, i have ide cd, sata disk, fdd [09:03] ivoks: anyway I hoped that I will be able to run p5b only with pata drives - and unfortunately I couldnt boot from additional controller and had to buy sata hdd - but's another story === lfittl [n=lfittl@194.50.115.210] has joined #ubuntu-kernel [09:03] ivoks: ok, can you boot from hdd ? [09:03] ivoks: to any system? windows or something? [09:03] no [09:03] grub freezes :/ [09:04] so you can boot from this hdd and then you stop on grub right? [09:04] anyway, i think this part of generic.c is key to this issue [09:05] (it means that technically your bios is configured properly to boot from sata hdd) [09:05] marcin_ant: ahm... i know that :) [09:05] marcin_ant: i'm not here trying to get help :) [09:06] my system works, i only want to make it work to others [09:07] ivoks: well sure but It's strange that you cannot boot to linux at all [09:07] i can boot... i don't need disk to boot to it [09:07] ivoks: i got workable dapper and my grub is working properly [09:08] ivoks: so this is why I ask because I'm trying to understand what can be broken on your machine [09:08] marcin_ant: my disk is connected to jmicron, not ich8 [09:09] ivoks: but you said that "but ich8 doesn't work either for me" [09:09] it doesn't, but that's another issue [09:09] i'm working on jmicron now [09:09] atm, i don't care about ich8 [09:09] ivoks: ok I see [09:10] ivoks: I just thought that you got your primary hdd connected to ich8 and cd/dvd to jmicron... [09:10] everything is connected to jmicron [09:11] cd to ide port, and disk to sata port [09:11] ivoks: anyway on my mobo I got one sata hdd connected to ich8 and it's fully operational [09:11] ivoks: than I got IDE cd/dvd connected to jmicron - which doesn't work with linux [09:11] that means that ich8 works, great [09:12] i'm hoping to solve that issue now [09:12] ivoks: and I got three PATA hd drives connected to additional IDE controlled on PCI [09:12] ivoks: which are also functional although I cannot boot from any of these drives [09:13] ivoks: but it's propably problem with this particular controller and maybe with p5b bios... and it's not important now [09:13] ivoks: another thing that doesn't work on this mobo is gigabyte LAN [09:14] ivoks: this mobo has two NIC's but only one works [09:14] interesting... i have only one nic on p5b [09:14] ivoks: hmmm [09:15] ivoks: I got Asus p5b deluxe with wi-fi [09:15] ivoks: maybe only this model has two NIC's === ivoks is now known as ivoks_away [09:40] i think the deluxe is indeed the only one with 2 nics === ivoks [n=ivoks@firewall.grad.hr] has joined #ubuntu-kernel [09:48] yoj! i got CD working [09:49] but still, my ich8 doesn't work :(((((( [09:50] i'll be back with a patch [09:56] ivoks_away: take a look at #62206 [09:56] ehh he left === ivoks [n=ivoks@ubuntu/member/ivoks] has joined #ubuntu-kernel [10:09] BenC: patch for CD jmicron is at: http://www.grad.hr/~ivoks/ubuntu/jmb.patch [10:09] BenC: tested, works great === tonfa [n=tonfa@footwar.residence.ens-lyon.fr] has joined #ubuntu-kernel [10:28] marcin_ant: ping [10:28] ivoks: pong [10:29] marcin_ant: could you, when you get home, write down your bios config, and send it to me? [10:29] marcin_ant: my ich8 just doesn't work :/ [10:29] ivoks: I see you fixed your jmicron :) [10:29] yes... it works [10:29] and patch is trivial [10:29] ivoks: sure - but I can tell you pretty simple thing [10:30] ivoks: I had problems with kernel from edgy I couldn't boot machine at all [10:30] that's cause CD didn't work [10:30] ivoks: then I set just default bios settings [10:31] and then in boot section [10:31] I just selected my hdd drive and it worked [10:31] maybe you could try this too [10:31] heh... [10:32] question is - do you have problems with ich8 in linux kernel or in bios? [10:32] in linux kernel [10:32] if i connect disk to ich8, grub starts on it [10:32] but kernel fails to detect cd [10:33] it reports that ata1 is slow to respond [10:33] and that drive failed to identify [10:33] ok but why cd? [10:33] sorry... not CD, disk [10:33] hmm strange [10:34] it can be something in bios... [10:34] with sata settings... it shoud be set to enhanced afair [10:34] it can, of course... [10:34] i tried all possible settings [10:34] ok I will send my settings to you [10:34] k, thanks [10:35] I will be able to do this at about 20-21:00 (I'm in Poland and now is 10:35 here) [10:35] same time in croatia :) [10:36] ok so I will try to catch you here at evening [10:36] you could send it to email [10:36] ivoks@grad.hr [10:36] or ubuntu.com [10:36] i don't know if i'll be here at that time [10:36] ok [10:37] this patch is for 2.6.18? [10:37] no, for edgy kernel [10:37] it's taken out of 2.6.18 [10:38] ehhh I don't want to try edgy yet :( [10:38] I did few days ago and couldn't boot at all [10:38] your SATA jmicron must be set up as AHCI, and IDE must be enabled in BIOS [10:38] i think p5b has bugs [10:39] kernel froze on setting ACPI on CPU or something like this... [10:39] no, it breaks on something else... [10:39] er... ich8 works for you with dapper? [10:40] ivoks: yes with dapper [10:40] khm... [10:40] ivoks: but I also had edgy for single day ;) [10:40] and ich8 worked? [10:40] ivoks: yes [10:40] ivoks: but not after dist-upgrade [10:40] heh... interesting [10:40] ivoks: I installed dapper once with instlux [10:41] ivoks: then upgraded with 'upgrade-manager' to edgy [10:41] ivoks: and it was ok [10:41] ivoks: then I next day I did dist-upgrade and couldn't boot [10:41] that sounds like regression [10:42] so, conclusion is that ich8 work with dapper, but not with edgy [10:42] ivoks: then I installed edgy from daily build 21.09.2006 [10:43] ivoks: on this disk on another machine with some via chipset and PIV 3GHz [10:43] that's irrelevant information [10:43] ivoks: but when I connected this disk at home to asus p5b [10:43] ...yes? [10:43] ivoks: I couldn't boot at all [10:43] that's it [10:43] ivoks: I could see grub [10:44] ivoks: then some messages about ACPI and usb errors [10:44] hehehe [10:44] that's it [10:44] ivoks: I don't remember them... [10:44] edgy's kernel has regression [10:44] that would mean if i add this patch to dapper [10:44] i should be able to boot from ich8 and i should be able to see CD [10:45] ivoks: so I was so annoyed and angry that I switched to windows [10:45] i will try that later today [10:45] ivoks: and then I installed dapper again via instlux [10:45] marcin_ant: cause CDrom didn't work? [10:45] ivoks: yes cd rom doesn't work on dapper [10:45] hehe, thanks million times [10:46] ivoks: ich8 can work - jmicron cannot [10:46] i know where to find bug now [10:46] ivoks: and because I don;t have separate partition for another linux distro (edgy) I don't want to upgrade to edgy yet [10:47] ivoks: because I don't want to mess with my current workable distro.. I need to work on this [10:47] ivoks: but I would like to have an ability to use cd/dvd in dapper too [10:48] ivoks: it's a bit annoying that I have to switch to windows to prepare backups :) [10:48] marcin_ant: this fix for IDE controller is trivial; i think i could be backported [10:48] i'm not so sure about SATA part [10:49] ivoks: well it's sata part is propably really not so important [10:50] well... pb5 has exterior sata port that's on jmicron controller [10:50] ivoks: btw if you have some free time could you take a look at #62206? [10:50] atm i don't have X :) [10:50] ivoks: I know - with raid support or something... [10:50] and i have exam in 3 hours [10:50] even wors... in 2 hours :) [10:51] ok it's not something very important - it's just my bug report about secondary NIC's on asus p5b deluxe [10:51] i can't do anything about that since i don't have that hardware [10:51] I verified this - your p5b has single LAN - mine has two controllers [10:51] add lspci, lspci -n and lspci -vvv to bug report, if you didn't allready [10:52] I did [10:52] and info about what kind of chipset it is [10:52] (taken from windows hardware manager) [10:52] ok... you have exam and I should work ;) [10:53] right [10:53] so... [10:53] brb [10:53] right :) [10:53] brb === ivoks is now known as ivoks_away === tonfa [n=tonfa@footwar.residence.ens-lyon.fr] has joined #ubuntu-kernel === gnomefreak [n=gnomefre@ubuntu/member/gnomefreak] has joined #ubuntu-kernel === gnomefreak [n=gnomefre@ubuntu/member/gnomefreak] has joined #ubuntu-kernel === marcin_ant [n=marcin@194.114.146.122] has joined #ubuntu-kernel [01:43] Mithrandir: i think i might have missed your response it went past my scrollback [01:45] zul: pushed my changes now [01:46] ok cool...thanks.. === zul [n=chuck@ubuntu/member/zul] has joined #ubuntu-kernel === tuxmaniac [n=aanjhan@unaffiliated/tuxmaniac] has joined #ubuntu-kernel === JanC [n=janc@lugwv/member/JanC] has joined #ubuntu-kernel === mvo [n=egon@p54A64AB9.dip.t-dialin.net] has joined #ubuntu-kernel [04:05] hmm...when jmicron said they were sending an eval board, I expected a mobo [04:05] they sent me PCI-E weirdness that I'm not sure I can even use [04:06] on a brighter note, verizon is digging up my driveway for the T1 circuit [04:07] oh oh oh send me the pcie card. ;-P [04:08] oh those crazy crazy hardware vendors === ivoks_away is now known as ivoks [04:12] howdy [04:13] nice, my amd64 box has PCI-E slots [04:13] hi BenC [04:14] ivoks: hey [04:14] BenC: that 'path' i sent you seams to fix jmicron ide problem for me [04:14] 'patch' [04:14] got it, and testing it [04:14] BenC: so 2.6.17 xen boots but when i try launch some guests it complains it cant find /dev/sda1 [04:14] BenC: and it looks like edgy kernel has regression for ICH8 (untested claim) [04:15] ivoks: regression from dapper? [04:15] yes [04:15] marcin_ant said he was able to install dapper on ich8 [04:15] wouldn't doubt it, I need to test ich8, and I've no hardware to test with [04:15] but when he upgrade to edgy, think didn't work anymore [04:15] i have hardware :) [04:16] you are welcome to test it [04:16] brb [04:17] I have the jmicron eval board, and after inserting it into my box, I got an oops on boot [04:19] ide/sata controller? [04:19] it will allways ops untill you disable IDE port or apply that patch :) [04:20] sata will work with 9.23, but i'm unable to boot from disk connected to jmicron sata controller [04:20] otoh, i'm able to boot from ich8 port, but then kernel doesn't see disk [04:21] anyway... i'll be back in couple of minutes === ivoks is now known as ivoks_ [04:50] BenC: you're aware of the "-9 panics on boot on lots of amd64 boxes"? [04:50] yeah, will be fixed tonight [04:50] amd64-agp is broken and will be disabled [04:51] it wasn't enabled before? [04:51] ppl will have to wait for edgy+1 for that little tidbit :) [04:51] was new, came with the DRM/AGP update I did last week [04:51] but I think it's missing some x86_64 mmio stuff that's not in 2.6.17 [04:52] ok [04:52] please do be very conservative with your next upload -- beta is Thursday. [04:53] BenC: I got a postinst failure today from 2.6.17-9-386 on a test dapper-edgy upgrade (post-inst returned error exit status 128). do you have any idea? or should I start digging into it? [04:56] mvo: update-initramfs failed? [04:56] or maybe update-grub failed [04:56] BenC: its not fully clear from the log, it looks like update-grub failed [04:58] I look into it, it is most likely not the kernels fault :) === kbyrd [n=Miranda@mailout1.vmware.com] has joined #ubuntu-kernel [05:00] yay, jmicron controller is working with that patche [05:01] [ 31.340375] Skipping disabled JMB363 IDE controller. [05:02] well, not exactly [05:03] heh [05:06] zul: had a chance to look at the stuff I put in git? [05:07] not yet..will do at lunch time [05:08] but from a quick glance it looks ok to me [05:13] BenC: you have to put SATA controller in AHCI mode [05:15] ivoks_: I have no way to do that... [05:15] no BIOS setup for the board [05:15] ah... pcie [05:16] i got the same mistake on first boot [05:16] went to bios to enable it to found out it's enabled [05:16] did reboot and, odd, it worked [05:20] bbl [05:20] bye [05:20] why would it need the SATA in ahci mode for the IDE to work :/ [05:20] BenC: maybe linux driver is broken [05:21] PCI is broken [05:21] in bios, it says that making SATA controller ahci, IDE will be enabled [05:21] lspci is reporting that the io ports are disabled [05:22] heh [05:22] anyway, time to go home... i'll return here from home [05:31] BenC: Something needs to switch the hardware into mixed PATA/SATA mode. Right now, the ahci driver does that - I'm not sure anything else does. [05:32] ahci driver is loaded [05:33] mjg59: The pci quirks are supposed to switch it to dualfn mode [05:34] I need to make sure the quirk is being run...adding a printk now [05:34] ahci is loadin and detecting the SATA bus's (no sata drive on it yet) [05:37] it may be that this card needs a bit more quirk than the built-in chipset, just because of the lack of BIOS support [05:38] BenC: Ah, hm. Yes, sorry, you're right. [05:41] [ 26.480781] PCI: JMB36x: Enabling dual function on 0000:03:00.0 [05:41] it's getting enabled [05:41] wtf [05:42] 03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) [05:42] 03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) [05:42] Yeah, that's normal [05:42] just wondering why it's disabled [05:42] Usually it's a fairly well-specced bios flag [05:43] Do you have the specs for the hardware? [05:43] In any case, there's a check in generic.c that looks to see what one of the PCI config registers contains, and uses that to deicde whether it's enabled or not [05:46] no, I have no specs for the hw === mvo_ [n=egon@p54A66C1B.dip.t-dialin.net] has joined #ubuntu-kernel [05:49] I just noticed that these two eval boards are different [05:50] I have a 363 and a 366 [05:53] the achi works...just booted with my 300GB SATA drive connected to it (root drive) [05:55] IDE is disabled on the 366 aswell [05:57] BenC: It's quite possible that the chip comes up with pata disabled and needs to be programmed by the bios to enable it [05:58] the JMicron BIOS screen shows it detecting the CDROM [05:58] Hm. [05:58] I'll email them and find out [05:58] even if things are working for built-in chips, I need to get this external thing working too [05:58] You might want to check that it is the pci configuration bit [05:58] the quirk might need some extra setup [05:59] but it enables the dualfn before the PCI scan, so I would expect the PCI subsystem to take care of things [06:01] BenC: Presumably it's erroring out at the bit at line 220 of generic.c? [06:01] yeah, it is [06:02] but lspci also shows that the ioports are disabled [06:02] I wonder if I need to just get the jmicron.c [06:03] BenC: Well, in that case surely the bios is never setting it up? [06:04] it shows values for the ports, but shows them as disabled [06:04] Region 0: I/O ports at 7c00 [disabled] [size=8] [06:04] Region 1: I/O ports at 7800 [disabled] [size=4] [06:04] etc... [06:04] or is [disabled] just meaning that the OS isn't using them? [06:06] is there a bios update for the board? [06:08] [ 460.205680] hdf: ATAPI 52X CD-ROM drive, 192kB Cache, UDMA(33) [06:08] answers that question [06:08] jmicron.c it is then [06:09] [ 459.413154] JMB361: 100% native mode on irq 66 [06:25] Mithrandir: looks good to me, ill do a test build tonight and upload === JanC [n=janc@lugwv/member/JanC] has joined #ubuntu-kernel === Lure [n=lure@clj46-234.dial-up.arnes.si] has joined #ubuntu-kernel === ivoks [n=ivoks@ubuntu/member/ivoks] has joined #ubuntu-kernel === Keybuk [n=scott@quest.netsplit.com] has joined #ubuntu-kernel [08:16] 2.6.17-10.24 uploading in about 10 minutes [08:17] BenC: changes? :) [08:17] mjg59: I still don't have the mactel stuff in, but will next time around [08:17] ivoks: Seems my eval boards needed the jmicron.c module [08:17] things are working for me now [08:17] ok [08:18] ivoks: You have ich8? [08:18] yes [08:18] actually, my client has it [08:19] is it working with current kernel? [08:19] no [08:19] it worked with old edgy kernel [08:19] BenC, will tomorrow's ISO have 2.16.17-10.24 ? [08:19] hardly [08:20] or any kernel working with g5? :) [08:20] BenC: it think it worked with -7.19 [08:22] since one guy told me that it works with dapper and it worked with edgy untill september 22. [08:22] svu_tv: installer needs to be rebuilt, so keep an eye on that, and you'll know when the CD's are updated [08:22] ivoks: So I guess I broke it with my backports [08:22] ivoks: Anyway to get access to a machine with that? [08:23] i just backported everything to edgy [08:23] errr... dapper [08:23] BenC, how could I keep an eye on the installer status? Is it available somewhere on the web? [08:23] but i can give you access [08:23] it still has -9-generic kernel + jmicron patch [08:23] that'll work [08:25] svu_tv: current installer has -9 udeb's, so either today's daily is working, or tomorrow's will [08:26] BenC, ok, I will try. thanks [08:31] pidof: not found [08:31] nice :) [08:34] ivoks: Is the 160G drive I see connected to the JMicron or ICH8 SATA controller? [08:34] jmicron [08:34] i doesn't work when it's connected to ich8 [08:35] would you be able to reboot it to the ICH8 controller? [08:35] tomorrow [08:35] :/ [08:35] the ICH8 is being detected and probed [08:35] ok [08:35] that's true [08:35] but it can't find disk [08:36] i'll try finding another sata disk and conect it so we can test [08:36] excellent, thanks === ..[topic/#ubuntu-kernel:BenC] : Ubuntu kernel development discussion ONLY | Kernel GIT tree info (updated): https://wiki.ubuntu.com/KernelGitGuide | 2.6.17-10.24 uploaded, JMicron Fixed, amd64-agp crashes fixed. | Daily kernel builds (for debug and testing purposes only) http://people.ubuntu.com/~bcollins/kernels-daily/ | Kernel Wiki: https://wiki.ubuntu.com/CategoryKernel [08:37] hooray! :) [08:39] I think I'm overloading the box I put those JMicron boards in [08:39] it already had 4 SATA channels, and 4 IDE ports...now I've added another 8 IDE ports, and 4 SATA channels [08:40] lol [08:40] heh kablooie soon === lfittl [n=lfittl@chello080109027166.17.14.vie.surfer.at] has joined #ubuntu-kernel [08:55] maybe we should use BenC's computer for internet backup :) === ivoks [n=ivoks@lns02-0376.dsl.iskon.hr] has joined #ubuntu-kernel [08:56] ah, forgot something... [08:57] BenC: http://kerneltrap.org/node/7153 ; search for jmicron :/ [08:57] 5 patched for jmicron :) [08:57] patches [08:58] ivoks: With the jmicron.c, most of the patches aren't needed [08:58] agree === jwest- [n=jwest@unaffiliated/jwest/x-422957] has joined #ubuntu-kernel === jwest- [n=jwest@unaffiliated/jwest/x-422957] has joined #ubuntu-kernel [10:54] later [10:55] zul: apparently, my problem is related to the tap:aio interface. Using file:/ works fine === lfittl [n=lfittl@chello080109027166.17.14.vie.surfer.at] has joined #ubuntu-kernel === zul_ [n=chuck@CPE0006258ec6c1-CM000a73655d0e.cpe.net.cable.rogers.com] has joined #ubuntu-kernel === `ph8 [n=foo@numerii.demon.co.uk] has joined #ubuntu-kernel [11:25] <`ph8> hi guys! [11:26] <`ph8> I saw a *very* promising looking conversation earlier that looked like BenC had figured out the jmicron bug [11:26] <`ph8> care to confirm/deny? :p [11:26] <`ph8> I've only got two days till i go to uni anyway so i won't be able to install in that time - would be nice to know it's making its way into a build though [11:57] ph8: -10.24 is working for me [11:57] it's uploaded [11:59] <`ph8> fantastic1 [11:59] <`ph8> and it'll take a few days to get into d-i for install? [12:00] yeah [12:00] <`ph8> mega [12:00] <`ph8> cheers [12:00] <`ph8> do you know if we need any compat bios settings? like ahci over ide? [12:00] <`ph8> s/over/instead of [12:03] nope, the pci quirks and jmicron ide driver should handle all that [12:04] <`ph8> fantastico [12:04] <`ph8> where do we send the gift basket? ;) [12:04] <`ph8> thanks though, i know you worked hard on it for us :o) [12:05] <`ph8> Should be ok for me to post on the bug report that it's fixed? [12:05] <`ph8> if you havne't already, my datacentre's been hit by lightning and i don't have email access at the moment [12:05] <`ph8> apparently they don't have a lightning rod? just a guess... :p