=== Yancho [n=yancho@195.158.87.23] has joined #ubuntu [12:01] !2.6.16 [12:01] Sorry, I don't know anything about 2.6.16 - try searching on http://bots.ubuntulinux.nl/factoids.cgi === Hobbsee [n=Hobbsee@ubuntu/member/hobbsee] has joined #ubuntu [12:01] ubotu tell me about kernel 2.6.16 === JayKay [n=JK@c1-173-11.rndf.isadsl.co.za] has joined #ubuntu [12:01] Sorry, I don't know anything about kernel 2.6.16 - try searching on http://bots.ubuntulinux.nl/factoids.cgi === SpAc [n=Timmy@203-173-8-234.perm.iinet.net.au] has joined #ubuntu === manudeb [n=manudeb@84-72-114-130.dclient.hispeed.ch] has joined #ubuntu [12:02] :'(:-[ [12:02] psusi: no, its not activating sil... why does it default to mapper anyway? [12:02] how can i add a new audio track on a divx file? [12:02] lk11mn: huh? could you add the debug flags again? dmraid -ay -fsil -vvvv -dddd and pastebin? === LionsPhil [n=phil@81-86-106-14.dsl.pipex.com] has joined #ubuntu === arek [n=arek@areo.ds.pg.gda.pl] has joined #ubuntu [12:02] sure [12:02] Hi, can someone point me to a good howto on running up a multiboot (Win + Ubuntu) on a single drive? === Mastastealth [n=stealth@c-65-34-237-214.hsd1.fl.comcast.net] has joined #ubuntu [12:03] ubotu tell SpAc about grub === Nakkel [n=nakkel@vektori.com] has joined #ubuntu [12:03] How cani make ubuntu a gateway to insternet [12:03] Answer: 2.6.16 is not in any Ubuntu version, 2.6.17 is in Edgy, .15 is in Dapper [12:03] Hello I m trying to connect a Palm to the Internet threw IRDA ... and some errors occured... my PDA connect to the pc but no internet :( === tacopon_ [n=tacopon7@softbank218128109115.bbtec.net] has joined #ubuntu [12:03] Spac: no howto needed... install ubuntu and it will take care of it [12:03] join #xubuntu [12:03] !dualboot | SpAc [12:03] SpAc: Dual boot instructions: https://help.ubuntu.com/community/WindowsDualBootHowTo (x86/AMD64) - https://wiki.ubuntu.com/YabootConfigurationForMacintoshPowerPCsDualBoot (Macintosh) [12:03] Flannel, If I upgrade to 2.6.17 will I be able to use drivers in the 2.6.16 kernel? [12:03] orion2012: 'lo. Re: the make/dash bug, my reply is in reference to your first post, in case it isn't obvious. ;) [12:03] !grub |Spack [12:03] Spack: grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto [12:03] SpAc: http://video.google.com/videoplay?docid=-6104490811311898236 [12:03] how can i add a new audio track on a divx file? [12:03] Rejected is probably reasonable. [12:03] psusi: http://pastebin.com/820083 === ryanpg [n=ryanpg@c-24-12-72-20.hsd1.il.comcast.net] has joined #ubuntu === {ergo}Proxy [n=ergo{Pro@d-199.dsl.tu-graz.ac.at] has joined #ubuntu === ifreq [n=ifreq@e83-245-137-102.elisa-laajakaista.fi] has joined #ubuntu === reverie19 [n=reverie1@pool-72-70-144-247.hrbgpa.east.verizon.net] has joined #ubuntu === josh_ [n=josh@66-191-145-50.dhcp.roch.mn.charter.com] has joined #ubuntu [12:04] hi all... is there a better way to do dpkg-reconfigure -a? it's fairly stupid in it's behavior now, for example of the 100s of packages to be reconfigured one is likely to fail, at wich point dpkg-reconfigure just quietly stops === eggzeck [n=exec@cpe-68-175-49-54.nyc.res.rr.com] has joined #ubuntu [12:04] thanks everyone... so then it wouldn't be hard to run 2 distro's of linux + win? [12:04] hey what is the vim command to do a global subsititue? [12:05] Hi, Is there a step by step howto that tells us how to network between ubuntu and winxp, with instructions for both sides? [12:05] also, there seems to be no way to resume where you left off, so hours are spent going over the same config options [12:05] lk11mn: well crap... I am out of ideas, and have to go [12:05] !mountingwindows [12:05] Sorry, I don't know anything about mountingwindows - try searching on http://bots.ubuntulinux.nl/factoids.cgi [12:05] !ntfs [12:05] To view your Windows/Mac partitions see https://help.ubuntu.com/community/AutomaticallyMountPartitions - See also !fuse === danl_ is now known as danl [12:05] there you do yourname [12:05] josh_: '%s/find/replace/g' .. something like that maybe === ifreq [n=ifreq@e83-245-137-102.elisa-laajakaista.fi] has joined #ubuntu [12:05] josh_: without quotes [12:05] psusi: k, well thx for trying dude, i'll prob seeya again === ifreq [n=ifreq@e83-245-137-102.elisa-laajakaista.fi] has left #ubuntu ["Leaving"] [12:05] Hey, I'm switching to Linux! :) Just keeping win on there for those 1 or two windows things ;) === kyaneos [n=kyaneos@84.77.23.182] has joined #ubuntu === the-mr-freak [n=chris@pD9E0BFE2.dip.t-dialin.net] has joined #ubuntu === Collin_D [n=rekahsof@node-566.tor.pppoe.execulink.com] has joined #ubuntu [12:06] SpAc, i would suggest using dapper if you're going to switch from windows to ubuntu === JohnM555 [n=JohnM555@c-69-250-77-243.hsd1.md.comcast.net] has joined #ubuntu === MrFatJack [n=MrFatJac@pool-71-240-185-166.dllstx.fios.verizon.net] has joined #ubuntu === killown [n=killown@201-27-175-11.dsl.telesp.net.br] has joined #ubuntu [12:06] AlienXL: how come? [12:06] TheGateKeeper, saw that video before , did you dual boot? [12:07] lk11mn: o/ === MatthewV [n=MatthewV@202.183.115.107] has joined #ubuntu [12:07] any one know how to turn on IP forwarding [12:07] SpAc, Dapper is much more stable and edgy still hasn't gotten all of the kinks worked out as far as hardware detection goes. === sanmarcos [n=Marc@unaffiliated/sanmarcos] has joined #ubuntu === oneseventeen [n=chatzill@206.169.15.5] has joined #ubuntu [12:07] how can I make list of commands to be run when I double click the file? [12:07] AlienX: ok, even though it is the latest stable release? === jomino [n=jomi@p54A3BE8E.dip0.t-ipconnect.de] has joined #ubuntu [12:07] Like, terminal commands === MrFatJack [n=MrFatJac@pool-71-240-185-166.dllstx.fios.verizon.net] has left #ubuntu [] [12:08] how does resolvconf update /etc/resolv.conf ? [12:08] I just set up a server install, and I can ping computers on the network, but cannot ping or wget files from servers on the internet. === MarsRouter [n=marsrout@203.81.217.127] has joined #ubuntu [12:08] JohnM555: bash script [12:08] AlienXL: hahaha... stability... come on! I've been running windows! :P === youser [n=owner@67-58-197-67.amtelecom.net] has joined #ubuntu === Nakkel [n=nakkel@vektori.com] has joined #ubuntu === andresmujica [n=AndresMu@201.245.236.24] has joined #ubuntu [12:08] SpAc, absolutely. Dapper really isn't much different from Edgy and it's quite a bit more stable. [12:08] JohnM555: you need to learn bash scripting.. google :-) [12:08] sanmarcos: I'll look that up... [12:08] oneseventeen: check your dns servers /etc/resolv.conf === CypherBIOS [n=cypher@ubuntu/member/cypherbios] has joined #ubuntu [12:08] Hello I m trying to connect a Palm to the Internet threw IRDA (with a pppd script)... and some errors occured... my PDA connect to the pc but no internet :( some knows how it is possible ? [12:08] Thanks josh_!! :) [12:08] coz_: no I have a caddy system, & put in which ever hdd I want to run === Sputn1ck [n=wam@unaffiliated/sputnick] has joined #ubuntu === AFigueiredo [n=aloysio@200.162.246.188.user.ajato.com.br] has joined #ubuntu [12:09] sanmarcos: it has my network's IP addresses for our DNS servers [12:09] SpAc, well, you can take my advice or leave it but I've been around for a while and would like to think I have a good idea what I'm talking about :) === mepaYancho [n=yancho@195.158.87.23] has joined #ubuntu [12:09] hi there [12:09] hey i cant get acces to my newly mounted windows partition even with nautilus [12:09] any help? [12:09] sanmarcos (which is probably why it actually gave me the IP address of google) [12:09] how do i turn on the ntfs writing capabilites? mount rw? [12:09] sanmarcos: doh! Our firewall won't let anything on the internet until it installs antivirus software, I just need to tell the router to ignore this IP, nevermind!! [12:09] oneseventeen: does ping www.yahoo.com work? are you using resolvconf ? apt-cache policy resolvconf === Klyra [n=Klyra@d54C51859.access.telenet.be] has joined #ubuntu [12:09] oneseventeen: ok [12:10] sanmarcos: thanks for the help though, I'll write down resolv.conf for future issues, I never know about that file! [12:10] oneseventeen: its for dnss [12:10] AlienX: I don't doubt it! I'm the one seeking your advice. I was just commenting on how unstable windows is for me === ChaKy [n=chaky@0-59.dsl.iskon.hr] has joined #ubuntu [12:10] so general consensus here is not to run Edgy yet? [12:10] sanmarcos: I have a script called wlan in my Home directory, is there I file type I can make it so all I need to do is double click it for it to run? === idontknow [n=harshul@c58-107-78-152.blktn1.nsw.optusnet.com.au] has joined #ubuntu === Chippy [n=Ch1ppy@S0106000d88a35c46.du.shawcable.net] has joined #ubuntu [12:11] i dunno why it says i dont have permissions to acces the partition im surei gave myself permissions [12:11] JohnM555: depends on how gnome handles it [12:11] SpAc, yeah, I'm not a fan of windows myself and haven't run it in several years. If you're new to linux, you're going to want something that's a bit easier to use and more stable than Edgy in my opinion. [12:11] ok === kitche [n=dragon@pool-70-16-39-100.buff.east.verizon.net] has joined #ubuntu [12:11] hey, is anyone else noticing bugs with the new NVIDIA drivers as compared to the beta ones? [12:11] Hello to all! === isaac_ [n=isaac@200.4.253.35] has joined #ubuntu [12:11] hello === mumbles-zzz is now known as mumbles-zzz-off [12:12] Chippy, not yet no, well lol, havent even restarted X so ;p [12:12] i try to add the universe repository [12:12] AlienX: Ok. I've been looking around for some time, and I really like the look of Ubuntu. I've been using it on and off on another machine. But I've decided to take the plunge and move to Linux on my main desktop [12:12] and i just uncoment some lines in sources.list === alex____ [n=alex@86.55.207.177] has joined #ubuntu [12:12] isaac_: so far so good [12:13] AlienX: I'm not a total newbie to Linux. I've been running a debian server for a few years now. That's been really handy in getting to know your way around the console. [12:13] I have problem to access to my Ubuntu station from other PC using Samba. Anyone can help? [12:13] SpAc, ubuntu is great. I highly suggest giving it a go. I've used several distros over the years and this is the one which I most prefer at the moment. [12:13] xopher: it's updating the screen really weird in some cases, you can see if best if you highlight something, but it happens all over too (like when I type, the bottom of the cursor line stays there, only a few pixels, but...) [12:13] is it enough do that? [12:13] isaac_: yeah [12:13] anyone tell me about antivirus on Linux. Guidebooks about Linux mention firewall but never antivurus. [12:13] really? === jackbobao [n=claudiot@201-69-163-15.dial-up.telesp.net.br] has joined #ubuntu === Milk_ [n=None@74.134.57.120] has joined #ubuntu [12:13] i used to use iptables [12:13] isaac_: yup, or you can use synaptic and check the uncheked repos in the repo manager [12:14] but it slowed my cable down to like 5k/s [12:14] ok [12:14] so... i'd like to hope I know a tiny bit more than the average newbie :) === rassihu [n=rassihu@M3665P002.adsl.highway.telekom.at] has joined #ubuntu [12:14] hello guys!! I'm having a REALLY hard time with WPA and edgy [12:14] Chippy, really weird, Ill tell you if I have any problems, and a possible solution, when I get the time to restart === MrFatJack [n=MrFatJac@pool-71-240-185-166.dllstx.fios.verizon.net] has joined #ubuntu === JeffAMcGee [n=jeff@cpe-70-114-234-35.houston.res.rr.com] has joined #ubuntu === MrFatJack [n=MrFatJac@pool-71-240-185-166.dllstx.fios.verizon.net] has left #ubuntu [] === didymo [n=ashley@CPE-61-9-197-223.static.nsw.bigpond.net.au] has joined #ubuntu [12:14] xopher: mkay === rag [n=rag@58.Red-80-24-33.staticIP.rima-tde.net] has joined #ubuntu [12:14] I've got a belkin wireless usb dongle that edgy recognises, but I can't get it to connect [12:14] isaac_: just make sure you run either apt-get update on the command line or "Get Updates" in synaptic [12:14] tacopon_, I don't think there has reported viruses for linux yet [12:14] tacopon_: there is no virus protection for linux most of the virus scanners out there only get windows === dsas [n=dean@cpc2-stok6-0-0-cust395.bagu.cable.ntl.com] has joined #ubuntu [12:14] Milk_: Seen the wiki? [12:14] SpAc, as an example. Edgy doesn't like my external HDD which was never any issue in dapper but the new hardware detection tool isn't exactly ready for mainstream yet IMO [12:14] What are your feelings on Fedora? My inital impressions (without having installed it) were that it was quite bloated! [12:15] u can get avast forlinux [12:15] isacc_: otherwise the packages in the repo will not show up === j_ack [n=rudi@p508D8A4C.dip0.t-ipconnect.de] has joined #ubuntu [12:15] unnecessary thugh [12:15] linux has no viruses [12:15] Milk_: https://help.ubuntu.com/community/WifiDocs/WPAHowTo [12:15] LionsPhil, yea, its not been much help, theres no wpa_supplicant.conf in my edgy install, unless there is an edgy specific wiki article [12:15] SpAc, I'm probably not a good person to ask about fedora. I don't play nicely with it === MrFatJack [n=MrFatJac@pool-71-240-185-166.dllstx.fios.verizon.net] has joined #ubuntu [12:15] except haters (windowsusers) === dsas [n=dean@cpc2-stok6-0-0-cust395.bagu.cable.ntl.com] has left #ubuntu ["Ex-Chat"] === ortega10 [n=ortega10@200-55-94-180.dsl.prima.net.ar] has joined #ubuntu [12:15] youser, there are indeed viruses for linux and have been for several years. Do a google search [12:15] Milk_: Ah, no, you have to write it. In my case, I had one prepared from my Gentoo install. [12:15] tacopon_: you only really have to worry about rootkits but ubuntu is secure by default [12:15] im havin a hell of a time trying to transfer files off my windows hd [12:16] hrm... [12:16] AlienX: Not a fan huh! [12:16] If you want happy-clicky GUI things, I'm afraid I don't know. ;) [12:16] and it goes in /etc ? [12:16] i upgraded to edgy and it worked like a charm, but my firefox fonts are horribly blurry, how do i change that? [12:16] oh realy? why no virus on linux? [12:16] mentok: but I can install bcm43xx-fwcutter after do that [12:16] LionsPhil, I could care less about guis [12:16] Yeah. See the Configuring WPA supplicant section. [12:16] haha [12:16] SpAc, not particularly. Many people absolutely love it but I've never much gotten along with fedora. === ltr^^^ [n=alex@modemcable199.199-82-70.mc.videotron.ca] has joined #ubuntu === macsim [n=macsim@cpc1-lewi5-0-0-cust467.bmly.cable.ntl.com] has joined #ubuntu === Hobbsee [n=Hobbsee@ubuntu/member/hobbsee] has joined #ubuntu [12:17] isaac_: is that a wireless driver? [12:17] AlienX: Was thinking of running up a copy of that too [12:17] mentok: yes === pitt0071 [n=username@ACBD8B28.ipt.aol.com] has joined #ubuntu [12:17] wpa_passphrase will helpfull generate a lump of the configuration for you. [12:17] mentok: see this https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx/Edgy [12:17] tacopon_: there is rootkits which you can call virus if you really want but you don't have to worry about them as much on ubuntu [12:17] SpAc, my advice is to try out several distros and find out which one(s) you like the most [12:17] LionsPhil, thanks for your help [12:17] Interestingly, Ubuntu doesn't seem to provide /etc/wpa_supplicant.conf.example =/ [12:17] No problem. [12:17] AlienX: I was going to put on the 64 version of Ubuntu. Wise idea?... yes... I have a 64bit machine [12:18] isaac_: it should be in the universe [12:18] isaac_: you'll also need ndiswrapper [12:18] SpAc, I have no idea as I don't run a 64 bit machine === philwhln [n=phil@client-82-27-227-179.brnt.adsl.virgin.net] has joined #ubuntu === aeon17x [n=aeon17x@124.106.198.158] has joined #ubuntu [12:18] i upgraded to edgy and it worked like a charm, but my firefox fonts are horribly blurry, how do i change that ? === SHR3K [n=icechat5@82-33-10-152.cable.ubr14.newt.blueyonder.co.uk] has joined #ubuntu [12:18] SpAc, you could ask on the ubuntu forum. It's pretty good and many people offer great advice [12:18] where doi go forhelp? [12:18] kitche, I see . thanks [12:18] hi, I'm trying to compile eventlib on ubuntu, but I get the error "checking for C compiler default output file name... configure: error: C compiler cannot create executables". Does anyone know a way to fix this? === nozorro [n=orso@tc10-n67-020.de.inter.net] has joined #ubuntu === Nakkel [n=nakkel@vektori.com] has joined #ubuntu [12:19] philwhln: did you install build-essential? [12:19] isaac_: which wireless card are you installing? [12:20] kitche: no, i'll try installing that then [12:20] hi, ive justinstalled linux but i cant copy anything, it says privilages, someone sed i need to be root any now im lost any help? === ChaKy [n=chaky@0-59.dsl.iskon.hr] has joined #ubuntu [12:20] mentok: sorry but i don't want to use ndiswrapper, because you can install some aplications for wireless [12:20] I tried to change the assignation of my twosuperior key, I edit /etc/X11/xkb/symbols/fr and change the line key { [ oe, OE, leftdoublequotemark, rightdoublequotemark ] }; like key { [ twosuperior, twosuperior, leftdoublequotemark, rightdoublequotemark ] }; but it doesn't work any idea ? [12:20] philwhln: that error usually means your missing some packages that is required to build software [12:20] mentok: bcm4318 === devhen [n=devin@66.119.143.160] has joined #ubuntu === bLaZeD [n=wls@unaffiliated/blazed] has joined #ubuntu === Volstrup [n=volstrup@0x5552fb8d.adsl.cybercity.dk] has joined #ubuntu [12:20] isaac_: ok, and that is the instructions for the linux native drivers === Collin_D [n=rekahsof@node-566.tor.pppoe.execulink.com] has left #ubuntu ["Leaving"] [12:21] can any1 1-2-1 message me i need somehelp settingup linux cheers any help appreiated [12:21] I hate wifi... [12:21] kitche: you were spot on! thanks for the quick answer to my problem :) [12:22] I've been working at this for 2 days and I still can't get it to work === transgress_ [n=transgre@71.14.18.29] has joined #ubuntu [12:22] mentok: yes, :D, i just installed [12:22] df [12:22] :D [12:22] ls === geokok [n=george@87.203.188.120] has joined #ubuntu [12:22] The only thing I've been able to do is get the drivers installed with ndiswrapper, and I don't even know if I did that right [12:22] isaac_: sweet === reZo [n=reZo@124.197.8.130] has joined #ubuntu === archangeleon [n=archange@69-162-197-122.bflony.adelphia.net] has joined #ubuntu [12:22] JohnM555: what's wrong ? iwlist shows your wireless-card ? === geokok [n=george@87.203.188.120] has left #ubuntu [] [12:23] Wireless is a bloody nightmare under Linux, to be honest. [12:23] macsim: I'm not even sure anymore [12:23] Hey, I was wondering if someone could help me run the program cl-mcclim [12:23] LionsPhil, I've noticed [12:23] LionsPhil, any experiance with wifi-radar? [12:23] I installed it successfully, but I have no idea where it is or how to start running it. [12:23] can anyone help me i just need to know how to install one program and get permissions [12:23] There are two big, glaring holes: i) the interface name is not standardised, and different drivers will give you ath0, or eth1, or wifi0, or wlan0, or... === Amaranth [i=travis@ubuntu/member/amaranth] has joined #ubuntu [12:24] JohnM555: what's ndiswrapper -l give ? [12:24] And ii) all the GUI tools seem to expect WEP or nothing, and have pitiful support for roaming about. [12:24] Milk_: Nope, sorry. [12:24] macsim: Um, === ryanpg [n=ryanpg@c-24-12-72-20.hsd1.il.comcast.net] has left #ubuntu ["Leaving"] [12:24] I got wpa_supplicant working under Gentoo, and just transferred that across to Ubuntu when I fled that particular sinking ship. [12:24] LionsPhil, yea, and oddly, the WIKI claims the gui can handle it [12:24] netwg121 driver installed, hardware present === Honk [n=Honk@cpe-24-209-211-93.cinci.res.rr.com] has joined #ubuntu [12:24] Yeah...I found that odd. I cleaned up that article yesterday, but couldn't verify that bit, so just left it alone. [12:24] JohnM555: iwconfig shows your card ? [12:25] macsim: And thats as far as I am. I've tried setting the data with iwconfig, but I'm either doing it wrong or to the wrong interface [12:25] macsim: I'll check again [12:25] LionsPhil, wpasupplicant doesn't like my psk [12:25] Hmm, interesting. [12:25] macsim: It shows eth2 with a bunch of data and ath0 with some data === args [n=root@rai21-2-82-228-65-232.fbx.proxad.net] has joined #ubuntu [12:25] macsim: I'm not sure where it says what my card is though === raghu206 [n=raghu@202.63.100.54] has joined #ubuntu === hamsterman [n=michael@86.112.0.198] has joined #ubuntu [12:26] JohnM555: can you pastbin the out of iwconfig please ? [12:26] LionsPhil, I tried the wpa_passkey thing, but got no response.. is it just slow? [12:26] can anybody gove me a hand, i stuck with a computer , linux and internet and i cant do anything [12:26] macsim: Whats that mean? [12:26] how to install gnome-dock with out installing XGL [12:26] LionsPhil, should just be wpa_passphrase "ESSID" right? === eXistenZ [n=amerdakk@unaffiliated/eXistenZ] has joined #ubuntu === geokok [n=george@87.203.188.120] has joined #ubuntu [12:26] Milk_: Shouldn't be...wpa_passphrase [12:26] macsim: I don't know what pastbin means === rrohde [n=rrohde@p54A60372.dip0.t-ipconnect.de] has joined #ubuntu [12:26] then type your passphrase string, and it should generate a config [12:26] JohnM555: you paste the iwconfig result on http://paste.ubuntu-nl.org === shyboy [n=shyboy@ARennes-257-1-137-110.w86-210.abo.wanadoo.fr] has joined #ubuntu [12:27] macsim: ok [12:27] got it! [12:27] hello everyone. Got Edgy, latest version, with latest OOo. OOo always crashes when I highlight a block of text or an image within an document. Any ideas? [12:27] !pastebin [12:27] pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (you can always find it in the channel topic, among other useful things) [12:27] macsim: I can't paste it, but I can type it. I'm on my laptop, next to my desktop. My desktop is the one with ubuntu === tommo [n=tom@e176117018.adsl.alicedsl.de] has joined #ubuntu [12:28] JohnM555: ok === sgorilla80 [n=tlp@user-0cet8gf.cable.mindspring.com] has joined #ubuntu === ramza3 [n=ramza3@c-24-99-72-157.hsd1.ga.comcast.net] has joined #ubuntu [12:28] hi. After installing new nvidia drivers+beryl I get this error when launching firestarter:http://paste.ubuntu-nl.org/30691/ === kermitX_ [n=kermit@unaffiliated/cxg] has joined #ubuntu [12:28] need help with an odd sound problem [12:29] wheres the best place to learn about turning on fans in ubuntu? === Luakagon [n=Luakagon@68-69-113-243.chvlva.adelphia.net] has joined #ubuntu [12:29] Ubotu, please tell geokok about beryl [12:29] i have a laptop and its overheating [12:29] i want the fan to come on === thor [n=diogenes@gulfal-host-cip525-01.gulftel.com] has joined #ubuntu [12:29] also i want to modify some of the battery settings [12:29] !kopete-icq-aim === Jordan_U [n=jordan@h-68-165-173-113.snvacaid.dynamic.covad.net] has joined #ubuntu [12:29] Due to a bug within Kopete's AIM/ICQ plugin, Kopete will not connect correctly to AIM/ICQ. Working versions can be found at: http://ubuntu.lnix.net/misc/kopete-fix/ [12:29] hamsterman, just ask your question and if someone knows, they'll more than likely help === [GuS] [n=LnX@unaffiliated/gus/x-663402] has joined #Ubuntu [12:29] ? [12:29] macsim: what would you be looking for from it? Might save me some time [12:29] evening dudes! does anyone know ho to get openGL headers installed? [12:29] LjL: it occurs in metacity as well === tich [n=bradley@bas3-montreal02-1096683018.dsl.bell.ca] has joined #ubuntu [12:29] !info lm-sensors | sgorilla80, this also contains a script called "fancontrol" that lets you change fan speeds depending on sensed temperature, etc === zyth [n=zyth@wnpgmb02dc1-187-63.dynamic.mts.net] has joined #Ubuntu [12:29] lm-sensors: utilities to read temperature/voltage/fan sensors. In component main, is extra. Version 1:2.10.0-7ubuntu3 (edgy), package size 479 kB, installed size 1472 kB [12:29] Hello. Thanks for listening! I have a fatal error trying to play a .avi file in MPlayer, in opening/initializing the selected video_out device. [12:29] is there gnome configurator for acpi stuff? [12:29] I have problem to access to my Ubuntu station from other PC using Samba. Anyone can help? === Nakkel [n=nakkel@vektori.com] has joined #ubuntu [12:30] macsim: Also, one of the interfaces has some details already because I tried to enter them in. [12:30] but I'm still having problems. [12:30] does anyone know if you can read uguru abit sensors from linux? [12:30] JohnM555: ok [12:30] okapi: do you have swat installed? [12:30] geokok, to begin with, you should use "gksudo" and not "sudo" with graphical programs === mar0k0 [i=markolan@201-212-235-207.net.prima.net.ar] has joined #ubuntu [12:30] !gnome-dock [12:30] gnome-dock is a MacOS X -like dock for the gnome desktop, see www.gnome-dock.org [12:30] thanks for your help! [12:30] No doubt I'll be back again soon :) [12:30] Luakagon: Ok, open mplayer and go to the preferences. [12:30] www.sologeeks.com.ar !!! [12:31] LionsPhil, how do I know for sure which driver I'm using? [12:31] okay,i tried linux and obviously its not for me, is it as hard as this or am i doing something wroong, windows ept crashing, all i need is to know how to set permissions and install one program [12:31] That bot's an impressive timesaver. [12:31] Hi, I have an Intel HDA Audio chipset (uses the intel hda audio module), and when I boot from the livecd and unmute the audio in alsamixer, audio is fine, but after I install to the hard disk, I get an error saying that the device is in use when I try and run alsamixer, and so sound doesn't work. Anyone have any idea what I can do? [12:31] thor: yes [12:31] macsim: I'm going to shut it down and remove one of the cards(I have 2 wireless cards, one usb, one not, one has a driver installed, one doesn't) I'll be back soon [12:31] LjL: makes no difference. I get the same msg [12:31] JohnM555: ok ;) [12:31] Milk_: Good question. Try wext and see if that works (or just leave off the -D flag or wpa-driver part). That should be generic. [12:31] Jordan_U, OK [12:31] Luakagon: Then go to the video tab and choose xv for the driver. === _DvP_ [n=David@128.235.102-84.rev.gaoland.net] has joined #ubuntu [12:31] That's the generic support, and apparently works most of the time. [12:31] okapi: do you have the shares defined? [12:31] i just installed flash 9, now when i open a webpage with flash firefox shuts down. how would i fix this? [12:31] i have the same error as zynth, but with an abit board with ac'97 realtek card === Trainstroker [n=phillip@adsl-072-148-237-202.sip.asm.bellsouth.net] has joined #ubuntu [12:32] geokok, well, i don't know, but people familiar with problems caused by installing beryl, xgl, the nvidia beta drivers etc should hang out in #ubuntu-xgl [12:32] I have a curious chipset in my laptop which requires me to specify hostap. As for anything else...I don't know, sorry. [12:32] phillip@ubuntu:~/Desktop$ sudo rpm -ivh gkrellm-gkrellfah2-1.2.3-0.i686.rpm [12:32] error: Failed dependencies: [12:32] wget is needed by gkrellm-gkrellfah2-1.2.3-0.i686 [12:32] gkrellm is needed by gkrellm-gkrellfah2-1.2.3-0.i686 === peacekpr [n=peacekpr@69-163-165-186.atlsfl.adelphia.net] has joined #ubuntu [12:32] Jordan_U, OK THANKS! I restarted it and it works D: [12:32] I mean :D [12:32] ok bye [12:32] LjL:ok thanks [12:32] Ubotu, please tell Trainstroker about paste [12:32] i have all dependencies installed === Luakagon [n=Luakagon@68-69-113-243.chvlva.adelphia.net] has left #ubuntu ["Leaving"] [12:32] Hi, I just installed the package cl-mcclim and all of the other required packages for it, but how do I start using the package? I have some lisp programming that I need to do and I can't start this program. [12:32] I guess you could spot it in use with lsmod, but that requires you to magically know which of the tens of modules is youre wireless driver. Which isn't exactly fun. ;) [12:32] Ubotu, please tell Trainstroker about rpm [12:32] Thor: share define where? I define the domaine and the host name on samba but nothing on Swat. === aldin [n=aldin@as54-ma1.dlp429.bih.net.ba] has joined #ubuntu [12:33] mentok: did you do that? [12:33] Luakagon: Then just restart mplayer and try playing a video again.. [12:33] message: chkdisk, 30 times mounted check forced-> how to disable this, btw ext3 FS [12:33] anyone here i can om for help? [12:33] hamsterman, do you have the exact error on hand? [12:33] can somebody help with odd sound problem in abit mobo [12:33] *pm [12:33] mentok: did u up ur wireless card? [12:33] can somebody help with odd sound problem in abit mobo === flurble [n=flurble@flurble.org] has joined #ubuntu === Caps [n=seb@82-69-137-118.dsl.in-addr.zen.co.uk] has joined #ubuntu [12:34] okapi: you need to define a root password, then log into swat as root. Then you will see more choices in swat allowing you to define shares (folders) that others can access. If you log in as you, you will only see a few options and won't be able to define the shares === yanis [n=yanis@88.218.25.113] has left #ubuntu [] === FunnyLookinHat [n=david@64.140.73.92] has joined #ubuntu [12:34] i just installed flash 9, but now firefox crashes when i open a flash page? how would i fix this? [12:34] cansome1 pm me anyine im really getting wuite annoyed with lnux its coompletely different to windows [12:34] ah cheers thir [12:35] *thor [12:35] thor: How can I access to swat? === livingdaylight [n=conrad@82-35-48-222.cable.ubr03.camd.blueyonder.co.uk] has joined #ubuntu === flurble [n=flurble@flurble.org] has left #ubuntu [] === funkyHat [n=matt@cpc7-nthc3-0-0-cust812.nrth.cable.ntl.com] has joined #ubuntu === |thunder [n=e@c-68-60-143-198.hsd1.mi.comcast.net] has joined #ubuntu === kyja [n=kyja@70-41-157-167.cust.wildblue.net] has joined #ubuntu === xel-ha [n=chus@131.Red-83-49-14.dynamicIP.rima-tde.net] has joined #ubuntu === nozorro [n=orso@tc10-n67-020.de.inter.net] has left #ubuntu [] === xel-ha [n=chus@131.Red-83-49-14.dynamicIP.rima-tde.net] has left #ubuntu ["Leaving"] === LionsPhil spots a flurble [12:36] thor pm [12:36] okapi: you access swat via a web browser (firefox). In the url type 'localhost:901' === b08y_ [n=808y@pc24.riednet.wh.tu-darmstadt.de] has joined #ubuntu === fabbione_ [i=fabbione@conference/ubuntuconf/x-2c4ca4c5a9b12b01] has joined #ubuntu [12:37] thor: ok let me try it. Thank you [12:37] Can somebody help with a weired sound problem? [12:37] !helpme [12:37] Don't ask to ask a question. Just ask your question :) [12:37] what do i need to play mp3's? [12:37] okapi: swat is a separate package from samba...you will have to install it separate from samba [12:37] Ubotu, please tell livingdaylight about mp3 === NDPowerBook [n=ndpowerb@207-172-70-240.c3-0.sbo-ubr2.sbo.ma.cable.rcn.com] has joined #ubuntu === brasileiro [n=aaa@201-43-246-16.dsl.telesp.net.br] has joined #ubuntu [12:37] !mp3 [12:37] thor? can u talk to me in pm a sec === killown [n=killown@201-27-175-11.dsl.telesp.net.br] has joined #ubuntu [12:37] For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats [12:38] anybody having problems with LG DVD Combo? [12:38] SHR3K: doubt it...what do you need [12:38] how to set root, set permissions and copy files === Riyonuk [n=Riyonuk@gtw13-2.esc13.net] has joined #ubuntu [12:38] LjL: can u take a look at my pastebin cause I cant get anyone to talk to me at the xgl channel [12:38] had no luck on other irc channels [12:38] Thor: I did and can find folder under usr/sbin. But I never try it before. [12:39] Is there such thing as a laptop with ubuntu installed? With no windows xp, just ubuntu, so I know everything works? [12:39] okapi: ok...try the browser and see if you can get into it. === Mr_Congeniality [n=mr_conge@71-213-103-189.slkc.qwest.net] has joined #ubuntu [12:39] SHR3K: can you be more specific? === mono [n=mono@ppp83-237-236-46.pppoe.mtu-net.ru] has joined #ubuntu [12:39] geokok, i have already, and as i said, i don't know what the problem might be. === shmio [n=shmio@c-67-171-94-129.hsd1.pa.comcast.net] has joined #ubuntu === tim167 [n=tim@d51A46238.access.telenet.be] has joined #ubuntu [12:39] LjL: I knew it was too good to be true...something had to break...thanks anyway [12:39] can anybody help me setting up my LG DVD Combo? It just stopped working for no obvious reason [12:40] yeah ijust got ubuntu installed and i downloaded no-ip to desktop, i cant put ot into filearea it says permissions denied ore something so i need root apparently, i got toold to put su in command but no luck === LionsPhil [n=phil@81-86-106-14.dsl.pipex.com] has left #ubuntu ["Ack,] [12:40] and i cant install no-ip cus of permissions and also its on desktop === tim167 [n=tim@d51A46238.access.telenet.be] has left #ubuntu [] === rekahsoft [n=rekahsof@node-566.tor.pppoe.execulink.com] has joined #ubuntu [12:40] SHR3K: ok...what is no-ip...is it a .deb package or a binary? Where are you trying to put it? === xel-ha [n=chus@131.Red-83-49-14.dynamicIP.rima-tde.net] has joined #ubuntu [12:41] right no-ipis a tar-gz [12:41] u_u === collin_ [n=rekahsof@node-566.tor.pppoe.execulink.com] has joined #ubuntu [12:41] i extracted it and it sed about making the installation file === rekahsoft [n=rekahsof@node-566.tor.pppoe.execulink.com] has left #ubuntu ["Leaving"] [12:41] what's a good web IDE? I'd like to quickly hack up a prototype site, which will take ME (don't know about you) ages to do in vi/emacs/nano/pico === overridex_ [n=override@c-24-62-7-132.hsd1.ma.comcast.net] has joined #ubuntu [12:42] how can i make any apps running as "root" using my user's gtk theme? [12:42] geokok, well indeed yes, that's very experimental technology still. [12:42] does anyone use any prog to monitor folding@home? === fuu_ [n=fuu@dslc-082-082-071-236.pools.arcor-ip.net] has joined #ubuntu === mmassonnet [n=mike@unaffiliated/mike-m] has joined #ubuntu [12:42] hi === dusk [n=dusk@zulu.ccs.neu.edu] has joined #ubuntu [12:42] !gtk 2.6 [12:42] Sorry, I don't know anything about gtk 2.6 - try searching on http://bots.ubuntulinux.nl/factoids.cgi [12:42] Is there a way to get X to not listen on tcp, even if it is not specified in xserverrc? [12:42] can anybody help me setting up my LG DVD Combo? It just stopped working for no obvious reason... === baastrup_ [n=baastrup@x1-6-00-14-6c-25-0e-45.k454.webspeed.dk] has joined #ubuntu [12:42] anyone have experience or know of a repository with gtk2.6? [12:42] SHR3K: sounds like you are trying to compile a src file....rather a complicated task for a newbie. When you extracted it, it should have created a folder on the desktop, if you look in that folder, to you see something called Makefile, and something called configure? === bimberi [n=dsymons@ubuntu/member/pdpc.active.bimberi] has joined #ubuntu [12:43] yeah [12:43] hi, I have a laptop with duo core 2 processor, does anyone know how to manual turn on the cpu fan or speed it up????? [12:43] mmassonnet: you can add nolisten tcp to your gdmrc or kdmrc (since with kdm it ignores what i added to any other rc anyway [12:43] no configure though [12:43] SHR3K: OK...we will give this a try, but it will probably not work and debugging it is not something we can do over IRC...but let's give this a go.... === rekahsoft [n=rekahsof@node-566.tor.pppoe.execulink.com] has joined #ubuntu === RobNyc_ [n=ax@pool-162-84-246-65.ny5030.east.verizon.net] has joined #ubuntu === xel-ha [n=chus@131.Red-83-49-14.dynamicIP.rima-tde.net] has joined #ubuntu === gotgenes [n=chris@pool-71-171-0-214.ronkva.east.verizon.net] has joined #ubuntu [12:43] SHR3K: open a terminal and type 'cd ~/Desktop' === evilhamsternator [n=root@86.112.0.198] has joined #ubuntu === rekahsoft [n=rekahsof@node-566.tor.pppoe.execulink.com] has left #ubuntu ["Leaving"] [12:43] thanks i appreciate any help === rekahsoft [n=rekahsof@node-566.tor.pppoe.execulink.com] has joined #ubuntu [12:44] SHR3K: if there is no configure, is there a autogen.sh? if not often it only needs a 'make' i do not know what yoyu try to build though === xel-ha [n=chus@131.Red-83-49-14.dynamicIP.rima-tde.net] has left #ubuntu ["Leaving"] [12:44] sound only works in root and firefox- please help!!! [12:44] SHR3K: look for the INSTALL file, it should list the required steps [12:44] yeah ofound that [12:44] how can i make any apps running as "root" using my user's gtk theme? === Bergcube [n=Bergcube@37.80-203-44.nextgentel.com] has joined #ubuntu [12:45] Ahhhh Thank God [12:45] morphish: if it does I would be surprised [12:45] morphish: but I start my X session from a tty. Actually, do you think there is a solution to have -nolisten tcp set "by default"? [12:45] but my original part was i cant access root === gotgenes [n=chris@pool-71-171-0-214.ronkva.east.verizon.net] has left #ubuntu ["Ex-Chat"] === bimberi [n=dsymons@ubuntu/member/pdpc.active.bimberi] has left #ubuntu ["qq"] === Akewa [i=akewa@dione.lostdomain.org] has joined #ubuntu [12:45] morphish: turns out I was using the wrong interface before. I had 2 wireless cards and I removed the one I didn't want to use. === xel-ha [n=chus@131.Red-83-49-14.dynamicIP.rima-tde.net] has joined #ubuntu [12:45] atm im putting everything on desktop cus i cant put it in filearea [12:45] Shoulda done that sooner... [12:45] can anybody help me setting up my LG DVD Combo? It just stopped working for no obvious reason... cdrecord -scanbus returns nothing [12:45] SHR3K>..it isn't time to access root yet...not until the install [12:46] Is there such thing as a laptop with ubuntu installed? With no windows xp, just ubuntu, so I know everything works? [12:46] ok sorry [12:46] theres makefile [12:46] SHR3K: did you type the command I gave you? [12:46] mmassonnet: you could add it to the script that starts X or to the right rc or pass it to startx perhaps, sec === jpedroza [n=jpedroza@216.83.154.248.airwired.net] has joined #ubuntu [12:46] tyeah it couldnt find desktop one sec [12:46] :/ [12:46] sound only works as root- could someone PLEASE help!!! === xel-ha [n=chus@131.Red-83-49-14.dynamicIP.rima-tde.net] has joined #ubuntu === pitti [i=pitti@ubuntu/member/pitti] has joined #ubuntu === Puck_ [n=Ovidio@host111-223-dynamic.1-87-r.retail.telecomitalia.it] has joined #ubuntu [12:47] thank you nonetheless :-) === mmassonnet [n=mike@unaffiliated/mike-m] has left #ubuntu ["I'm] === Gusanita [n=Gusanita@201.132.41.178] has joined #ubuntu === Gusanita [n=Gusanita@201.132.41.178] has left #ubuntu ["Abandonando"] === Puck_ [n=Ovidio@host111-223-dynamic.1-87-r.retail.telecomitalia.it] has left #ubuntu ["Ex-Chat"] [12:48] evilhamsternator: http://ubuntuforums.org/showthread.php?t=205449&highlight=sound+only+works+as+root [12:48] scroll down about half way === Bergcube [n=Bergcube@37.80-203-44.nextgentel.com] has left #ubuntu ["http://www.ubuntu.com/"] [12:48] thanks [12:48] no it sed bash: cd: /home/server/desktop:no such file or directory === kyja [n=kyja@70-41-157-167.cust.wildblue.net] has joined #ubuntu [12:49] its Desktop === burner [n=burner@c-67-173-254-148.hsd1.co.comcast.net] has joined #ubuntu === bur[n] er [n=burner@c-67-173-254-148.hsd1.co.comcast.net] has joined #ubuntu === ZeN [i=Lou@24.225.254.10] has joined #ubuntu [12:49] SHR3K: you downloaded the file to your desktop, right? Are you logged in as 'server'? [12:49] yeah === arnducky [n=ordinary@S01060017ee009b87.cg.shawcable.net] has joined #ubuntu [12:50] creaed user logged in thats about it [12:50] i havnt done anything else [12:50] SHR3K: ok...at the prompt type 'cd ~' === bur[n] er [n=burner@c-67-173-254-148.hsd1.co.comcast.net] has left #ubuntu [] [12:50] ok === rever [n=rever@ip72-200-185-44.ri.ri.cox.net] has joined #ubuntu [12:50] SHR3K: now type 'ls' and see if there is a 'Desktop' [12:50] yeah [12:51] Can someone help me with booting from CD on a G3 iMac (Lime/Tray)... it's a pressed CD I got via ship it, it mounts under OS9 but no key sequences will let me boot from this CD... I can however, boot from an OSX CD. [12:51] onky one that came uin blue [12:51] SHR3K: OK...type 'cd Desktop' === geokok [n=george@87.203.188.120] has left #ubuntu [] === burner [n=burner@c-67-173-254-148.hsd1.co.comcast.net] has joined #ubuntu === FlimFlamMan [n=FlimFlam@d65h243.public.uconn.edu] has joined #ubuntu [12:51] Hi I would like to have a fat32 partion automatically mount at boot with read write permissions for all users. What do I need to put in the fstab? [12:51] no such file r directory [12:51] hello. nautilus is using up all available CPU. can i restart it without restarting X ? === Glutinous [n=steven@ppp170-152.lns1.per1.internode.on.net] has joined #ubuntu [12:51] !vfat === mRCUTEO [n=NIX2@I.B.E.N.T.L.E.Y.T.E.L.bentleytel.net] has joined #ubuntu [12:52] To view your Windows/Mac partitions see https://help.ubuntu.com/community/AutomaticallyMountPartitions - See also !fuse [12:52] yes vfat [12:52] anyone knows how can i install TCL-DEVEL in UBUNTU? [12:52] is there anyway in /proc where you can see if your cpu fan is running? === xel-ha [n=chus@131.Red-83-49-14.dynamicIP.rima-tde.net] has joined #ubuntu [12:52] im in desktop [12:52] FlimFlamMan: try killall -9 nautilus [12:52] I have /dev/sda2 /media/share vfat auto,users,rw [12:52] it went into desktop now [12:52] how do I run a bash script from the terminal? [12:52] Terminus: and gnome will start it back up as needed? [12:52] rever, read ubotu's link [12:52] However it does not mount with rw for users [12:52] FlimFlamMan: yes [12:52] thanks [12:52] burner, Thanks [12:53] SHR3K: ok....now type 'configure' and see if it runs. If so, let it finish and let me know when [12:53] baastrup_: AFAIK, you need lmsensors for that. [12:53] JohnM555: chmod +x filename ./filename [12:53] SHR3K: oops....type './configure'....sorry [12:53] LjL: thanks === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu [12:53] command not found [12:53] ubotu, Thanks [12:53] Thanks for the help! [12:53] ok === jkku3 [n=niklesod@ip70-187-199-233.dc.dc.cox.net] has joined #ubuntu === jkku3 is now known as botxj [12:54] no === ago [n=ago@87-194-44-184.bethere.co.uk] has joined #ubuntu [12:54] Terminus: hmm, my laptop starts powering of and gets prety hot in the left site, I cant feel the breez from the cooler, and gnome snesor applet says the cpu temp is over 90 c [12:54] nothing happened it sed no such file === uenyioha [n=uenyioha@CMU-177590.WV.CC.cmu.edu] has joined #ubuntu [12:54] hey guys [12:54] hi [12:54] SHR3K: type 'pwd' and let me know what it says [12:55] !info lm-sensors | baastrup_ [12:55] lm-sensors: utilities to read temperature/voltage/fan sensors. In component main, is extra. Version 1:2.10.0-7ubuntu3 (edgy), package size 479 kB, installed size 1472 kB === ryanpg [n=ryanpg@c-24-12-72-20.hsd1.il.comcast.net] has joined #ubuntu [12:55] Hi all === xanthomryr [n=xanthomr@xdsl-195-14-220-174.netcologne.de] has joined #ubuntu === redguy [n=mati@public-gprs19093.centertel.pl] has joined #ubuntu [12:55] does anyone know what packages provide the programming headers in Edgy? === Vaun [n=jws141@pool-151-204-24-71.pskn.east.verizon.net] has joined #ubuntu [12:55] it says /home/server/desktop [12:55] LjL" O dpm [12:55] whoops [12:55] argh! now how the heck do I even know when/if dpkg-reconfigure has finished!?!? [12:56] a program im compiling is failing due to the lack of the appropirate linux headers [12:56] Started using tilda but once I hide it, I cannot get the terminal back. Any idea? [12:56] !info linux-headers-generic | uenyioha [12:56] SHR3K: is the 'd' in desktop upper or lower case? [12:56] linux-headers-generic: Generic Linux kernel headers. In component main, is optional. Version 2.6.17.10 (edgy), package size 23 kB, installed size 52 kB [12:56] upper [12:56] Does Opera bog down anyone else's CPU? [12:56] i realised that [12:56] hello everyone. Got Edgy, latest version, with latest OOo. OOo always crashes when I highlight a block of text or an image within an document. Any ideas? [12:56] LjL: I don't think I'm doing it right. I cded to ~/Scripts because thats where my script is, then I typed chmod +x eth2Setup.sh ./eth2Setup.sh but that didn't seem to work [12:56] SHR3K: right...case is important....type 'ls' and see if you can spot the folder that was created on yoru desktop === ZeN [i=Lou@24.225.254.10] has left #ubuntu [] [12:57] can anybody help me setting up my LG DVD Combo? It just stopped working for no obvious reason... cdrecord -scanbus returns nothing [12:57] JohnM555, *first* type chmod +x eth2Setup.sh to make the file executable, then press Enter, and *then* type ./eth2Setup.sh [12:57] yeah only one again === evilhamsternator [n=root@86.112.0.198] has left #ubuntu [] [12:57] removed everyhting else from desktop fornow [12:57] LjL: Thanks, works:) [12:57] SHR3K: ok....type 'cd foldername' (you never told me what it is ) === gato0_ [n=gato@245.pool80-102-115.dynamic.uni2.es] has joined #ubuntu [12:58] Is there a way to run a bash script form the File Browser? === Remy [n=honkey@144.131.139.202] has joined #ubuntu [12:58] lol sorry === zOrK [n=eclipse@c-66-176-68-228.hsd1.fl.comcast.net] has joined #ubuntu [12:58] is there a way to run a kill command that will kill the process id that is my life? [12:59] not with ubuntu bot :) [12:59] ok === Chu [n=chubuntu@cpe-66-74-195-151.san.res.rr.com] has joined #ubuntu === shmho [n=shmho@134.75.55.113] has joined #ubuntu [12:59] its in thefolder [12:59] JohnM555: you should only need to double click on it to run it, but you won't see anything happen [12:59] !easyubuntu [12:59] easyubuntu is easyubuntu is a script that automates installation of some items. Use at your own risk. See http://easyubuntu.freecontrib.org/ - For help and or discussions about EasyUbuntu please join #easyubuntu [12:59] SHR3K: now try './configure' [12:59] !automatix [12:59] automatix is a script that tries to install some software, and often fails and breaks systems. We don't provide support for it, and we strongly discourage its use. === aidanr [n=aidanr@83.147.134.5] has joined #ubuntu [12:59] botxj: pidof $(mylife) [12:59] thor: When I double click on it it opens in gedit === u^A [n=allberto@124.82.72.6] has joined #ubuntu === Nakkel [n=nakkel@vektori.com] has joined #ubuntu [01:00] LjL: its do i need any extra modules, im running 2.6 kernel and 686 smp [01:00] no such file or directory [01:00] JohnM555: right click on it and check the properties...see if it is 'executable' [01:00] baastrup_: eh? [01:00] LjL: lm-sensors sorry === DarkMageZ [n=richard@ppp252-249.lns3.syd6.internode.on.net] has joined #ubuntu === menko [n=menko@203-184-56-167.jetbuster.co.nz] has joined #ubuntu [01:00] SHR3K: if you type 'ls' do you see the files you saw earlier....Makefile and configure? === Xorlev [n=raven@unaffiliated/xorlev] has joined #ubuntu === Shadowpillar [n=Shadow@dialup-4.233.127.195.Dial1.LosAngeles1.Level3.net] has joined #ubuntu [01:00] hello people! when somebody has got a little of time for one question: do you have any information for break file system restore? links... etc? I can't google (sorry my inglish is bad :)) === timo90 [n=timo901@cpc3-stkn1-0-0-cust947.midd.cable.ntl.com] has joined #ubuntu [01:00] hi, with thunar, when I right click on a folder/file, the right click menu disappears as soon as I let go of the right mouse button. (ie, if I just click normally the menu appears and disappears). Anyone know how to fix this? [01:00] LjL: if I disconnect uts because my machine poweroff === yock [n=myockey@pdpc/supporter/active/Yock] has joined #ubuntu [01:01] no configure [01:01] thor: the type is shell script. Where should it say executable [01:01] there has never been a configure [01:01] baastrup_: in theory not, i don't think, but then i've had a few reports of people saying it complained about i2c something. try "modprobe i2c-dev" if that happens [01:01] do you want address i downloaded it from? === Super_King [n=brandon@24-177-155-35.dhcp.mrqt.mi.charter.com] has joined #ubuntu [01:01] SHR3K: then let's try this....type 'make' and see if that runs [01:01] hey folks, is anyone using beryl with the open source ati drivers? How's the performance? Decent? [01:01] der0b, it's ok [01:01] can we install gnome-dock with out installing xgl === Crankymonky [n=dean@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu [01:02] it did a new line but said command not found === yah_ [n=yah@APoitiers-157-1-48-243.w83-193.abo.wanadoo.fr] has joined #ubuntu [01:02] thor: Where in properties should it say executeable, I don't see it anywhere [01:02] ryanpg: not a lot of lag? === adrigen [n=adrigen@218-214-68-125.people.net.au] has joined #ubuntu [01:02] feels OK? === dope_ [n=dope@70-20.202-68.tampabay.res.rr.com] has joined #ubuntu === rvcouto [n=rodrigo@c93465e3.virtua.com.br] has joined #ubuntu [01:02] der0b, not too bad, some odd glitches here an there [01:02] JohnM555: if it recognizes it as a shell script it should b executable...just a sec [01:02] how can i ssh to my linux machine? i keep getting a connection refused [01:02] hey all. Does anyone know where I can disable the tiling thing GNOME does when you minimize windows? I know it's in gconf somewhere but I can't find it [01:02] der0b, give it a try (you may find openoffice locks up your machine) [01:02] thor: It does recognize it as a shell script :\ [01:02] whats the web addy topaste so i can show you? [01:02] SHR3K: then you don't have the compiler (gcc) or a bunch of other stuff installed. Like I said...really too complex for IRC [01:02] thor: its working now [01:02] Does anyone else here use thunar under edgy? [01:03] thor: I don't know what changed. [01:03] SHR3K: /msg ubotu pastebin === render [n=render@213-140-21-234.fastres.net] has joined #ubuntu [01:03] ok [01:03] thanks ryanpg :) [01:03] thor: thanks [01:03] JohnM555: are you in gnome? [01:03] thor: I did it and it seems to work but I have another error... [01:03] der0b, np [01:03] thor: yea, its working now, even though I didn't change anything === JosefK [n=brett@82-42-147-9.cable.ubr01.sprt.blueyonder.co.uk] has joined #ubuntu [01:03] SHR3K: by the way it's ./configure not just configure [01:03] JohnM555: I *AM* good! [01:03] i know [01:03] thor: Indeed :) [01:03] however, I am not [01:03] Okay the right click menu doesn't disappear as root, what could be causing it? [01:03] i typed ./configure [01:04] okapi: what error do yo uget? === thunderbear [n=magnus@user-0c2h2bt.cable.mindspring.com] has joined #ubuntu === str0ng [n=strong@203.131.142.36] has joined #ubuntu [01:04] as thor sed it came up with error 127 [01:04] Thor: Do you know how to get rid of this error: "smbmnt must be installed suid root for direct user mount" [01:04] kitche: I believe he doesn't have make or gcc....they don't install by default === jeffreyb [n=jeffreyb@pool-71-120-75-170.ipslin.dsl-w.verizon.net] has joined #ubuntu [01:05] Is there a chanel for the PPC version of ubuntu? [01:05] yeah i have a clean install nothing done yet [01:05] SHR3K: error 127 doesn't mean much does it show a lot of lines scrolling but you need to install build-esstenial [01:05] Hmm...When I do sudo iwconfig eth2 key [My key here] I get an error 'SET failed on device eth2 : Unknown error 524' [01:05] yep [01:05] okapi: yes and no. It is telling you that smbmnt can only be used by root. There is a way around that...by making it suid. Or....you can issue the command as 'sudo smbmnt...' === thunderbear [n=magnus@user-0c2h2bt.cable.mindspring.com] has left #ubuntu ["Leaving"] === jayHat [n=jay@ool-45777a22.dyn.optonline.net] has joined #ubuntu [01:06] SHR3K: ok yeah pastebin what you have since error 127 doesn't mean much but you need that package [01:06] jpedroza, no, not specifically === jatt [n=user@p54A3FE8C.dip.t-dialin.net] has joined #ubuntu [01:06] Hi, when I shutdown ubuntu without closing firefox first, it always asks if I want to restore the last session when I start it. Doesn't Gnome gracefully shutdown running applications on shutdown? [01:06] Thor: if I want configure or change the permision for that where should I go? [01:06] ok 1 sec [01:06] !pastebin [01:06] pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (you can always find it in the channel topic, among other useful things) [01:06] Kannix_: that is a feature in firefox [01:06] JohnM555: does dmesg tell you more? [01:06] Kannix_, it's firefox specific... [01:07] okapi: it is done with the chmod command in a terminal [01:07] kitche: I thought it was a feature when you crash it. [01:07] morphish: Sorry, how do I do dmesg again? dmesg | more? [01:07] edgy is not excepting incoming connections properly. I have no software firewall and my router is forwarding what I want to my lan addy. so what is going on? [01:07] FunnyLookinHat: But when I shut down firefox and reopen it normally, it does not do that. [01:07] okapi: I think you can also do it in nautilus, but I don't use gnome so am not very familiar with nautilus [01:07] can anybody help me setting up my LG DVD Combo? It just stopped working for no obvious reason... cdrecord -scanbus returns nothing === Super_King_ [n=brandon@24-177-155-35.dhcp.mrqt.mi.charter.com] has joined #ubuntu [01:07] Hi, my printer has been priting REALLY slowly, and once I had removed it I couldn't add it again (it got stuck at "reading database"), so I removed all the printing related packages. [01:07] FunnyLookinHat: and it only gives you that "restore session" option in case you crash it (or send a sigkill) [01:07] Kannix_, right... I think it's only when firefox is sent a close/end_process message by the X manager [01:08] SO which packages should I install to use a printer with a guntenprint (gimpprint) driver? [01:08] FunnyLookinHat: So it happens in KDE as well? [01:08] okpasted it [01:08] hey all. Does anyone know where I can disable the tiling thing GNOME does when you minimize windows? I know it's in gconf somewhere but I can't find it [01:08] Kannix_, my guess is yes. But I don't run Kubuntu so i can't say === custom163 [n=izzy@cpe-68-201-155-165.sw.res.rr.com] has joined #ubuntu === hulillama [n=daniel@189.141.117.15] has joined #ubuntu === mcni7e [n=x1234@56349cea.rev.stofanet.dk] has joined #ubuntu [01:08] Super_King_ gconf-editor [01:08] FunnyLookinHat: I changed from Firefox 1.5.x on KDE to 2.0 on Ubuntu/Gnome and thought "Wow, that is bad of Gnome" :) [01:08] hello === _karl_ [n=travis@207.53.228.61] has joined #ubuntu [01:09] apparently i need to install something else first [01:09] thor: chmod command is like changing the setup through a terminal. There is no way to do that on gui. I am using KDE === Martincho [n=Martin@201.250.240.28] has joined #ubuntu [01:09] Kannix_, haha, yea go figure. But that option wasn't available in 1.5 afaik === GrimWald [n=Telepath@acces1042.res.insa-lyon.fr] has joined #ubuntu [01:09] hahaha, all of the time people like me join in channel looking for free tecnic suport :-D ubuntu is famous!! xDD [01:09] okapi: open a terminal, and type 'ls -l /usr/bin/smbmnt' [01:09] FunnyLookinHat: True. But as I said, I did not know it was on regular use as well. Just on crashes. [01:09] FunnyLookinHat: It is a bit annoying, I must say. [01:09] b08y: yeah I've been looking in gconf-editor, I just can't find the key to edit :) [01:10] anyone got ubuntu running on a G5 machine? [01:10] Kannix_, FF must interpret gnome telling it to close as a crash ; ) [01:10] Super_King_ apps -> metacity -> general -> reduced_resources [01:10] FunnyLookinHat: Is there no way to remotely shutdown firefox without triggering that "session" message? [01:11] FunnyLookinHat: Oh well. [01:11] kitche? i pasted it [01:11] Kannix_, probably not. It seems like it would be easily avoidable if it was built in === oscar [n=oscar@189.130.132.243] has joined #ubuntu [01:11] thor: I have root [01:11] SHR3K: where's the url? === mnepton [i=mneptok@conference/ubuntuconf/x-8c15cad83bb38b85] has joined #ubuntu [01:11] one sec [01:11] okapi: I don't understand...what do you mean? [01:12] b08y: thank you much! === kaptengu [n=gurra@c213-100-60-132.swipnet.se] has joined #ubuntu [01:12] okapi: oh...you mean in response to the command? [01:12] alguien abla espaol? [01:12] paste.ubuntu-nl.org/30699 [01:12] yohablo espanol oscar [01:12] nadie [01:12] thor: yes, in response of the command [01:12] ja [01:13] sox forgot about thatlol === Oni-Dracula [n=oni@68-189-172-052.dhcp.gnvl.sc.charter.com] has joined #ubuntu === luisito [n=luisito@186sosua109.codetel.net.do] has joined #ubuntu [01:13] !sp | oscar [01:13] sp: James Clark's SGML parsing tools. In component main, is optional. Version 1.3.4-1.2.1-47 (edgy), package size 158 kB, installed size 564 kB [01:13] oops.... [01:13] !es | oscar [01:13] oscar: Para Espaol por favor usen #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendrn mas ayuda. [01:13] como puedo poner [01:13] la matrix en mi pantalla? [01:13] I have an IBM Netvista M42 Desktop, Dapper server install. 6.06.1 was fine. After updates, the system clock is totally whacked. I ran ntpdate earlier today, and I just had to do it again: adjustement was 2.5 HOURS. What's going on? [01:13] ostiah algiuen que habla en castellano!! [01:13] jajaja [01:13] anyone here have ubuntu running in a G3 600MHz iBook? [01:13] SHR3K: yeah get build-essential [01:13] eso es un salvapantallas tronco! [01:13] thor: is that mean by changing the privilege on that file it will fix my error? [01:13] how:P [01:13] si === inuyasharenegade [i=UPP@c-68-81-7-199.hsd1.de.comcast.net] has joined #ubuntu [01:13] Which packages should I install to use a printer with a guntenprint (gimpprint) driver? (I removed all printing packages) [01:13] es algo asi [01:13] oscar: ve a #ubuntu-es [01:14] okapi: slow down...let me explain.... [01:14] download itoff net? [01:14] ok ok! sorry people! xDD [01:14] my sound stopped working. whats the best way to restart audio in linux without rebooting? [01:14] thor:ok [01:14] okapi: the first 'root' is the user that /usr/bin/smbmnt belongs to, the second 'root' is the group it belongs to...but we are interested in something else... [01:14] claro [01:14] sizzam: [01:14] sudo /etc/init.d/alsa-utils restart [01:14] on my G5 machine i have problems installing boot loader after instalation ... === grout [n=grout@69-173-181-113.sbtnvt.adelphia.net] has joined #ubuntu [01:14] thanks ja [01:15] *jatt [01:15] SHR3K: it's a package which will isntall gcc make and other things that are needed to compile stuff [01:15] whats the latest intel video driver? [01:15] okapi: at the very left end it should say '-rwxr-xr-x'...do you see that? [01:15] mcmahonm: yaboot doesn't like you? [01:15] ok but i find it on net yes? [01:15] anyone here have ubuntu running in a G3 600MHz iBook? [01:15] thor:yep === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu [01:16] morphish, was it for me or for mcmahonm [01:16] ? :) [01:16] thor: I have -rwxr-xr-x [01:16] okapi: ok...the first three letters (rwx) are the owner of the file, the next three are the group of the file, the third three are the world.... [01:16] SHR3K: sudo apt-get install build-essential [01:16] mcni7e: oh, you === redguy [n=mati@public-gprs19093.centertel.pl] has joined #ubuntu [01:16] okapi: so what that says is that the owner of the file (root) can 'r'ead the file, 'w'rite the file, and e'x'ecute the file.... === FidO-DidO [n=no@87.217.56.149] has joined #ubuntu [01:16] morphish, yeah, yaboot can't install ... complains about "path" for my drive in openfirmware === sgorilla80 [n=tlp@user-0cet8gf.cable.mindspring.com] has joined #ubuntu [01:17] okapi: the group that file belongs to (root) can only 'r'ead and e'x'ecute the file..... === reZo [n=reZo@124.197.8.130] has joined #ubuntu [01:17] is there a way to tell your laptop to stop charging the battery? [01:17] okapi: and the whole world can also 'r'ead and e'x'ecute the file...so you see that? [01:17] it seems like my laptop is malfunctioning, and keeps swtiching on and off [01:17] when I set the key for eth2 with sudo iwlist eth2 key [my key] I get 'Error for wireless request "Set Encode" (8B2A) : Set Failed on device eth2 : Unknown error 524' What did I do wrong? [01:18] well the charger switches on and off, when it get close to 100% [01:18] yo [01:18] what's the command to restart the computer [01:18] what do i need to look at to manually modify the battery charging settings? [01:18] dope_: reboot [01:18] mcni7e: you could ask in #gentoo-ppc if there is no #ubuntu-pps JoseJX or others for sure know openfirmware paths in their sleep, i never had to fudge with mine OF stuff on a mac mini [01:18] thx [01:18] s/pps/ppc/ [01:18] gotto put cd in one sec === Vaun [n=jws141@pool-151-204-24-71.pskn.east.verizon.net] has joined #ubuntu [01:19] thor: yes but on my case do i need to put the user on same group as the root or should I change the user of the file? === Limulf [n=turgon@VA1-1E-u-0687.mc.onolab.com] has joined #ubuntu [01:19] ubuntu edgy takes some minutes to start, all is "fine" until de gdm logi, but after login it takes 2 or 3 minutes to load nautilus, the desktop and stuff [01:19] how do i kill a program that's running from the command line? [01:19] what's wrong for me? [01:19] morphish, i had it installed on my G4 with no sweat... but G5 is diff. story obviously ... :( [01:19] thor: I want another user to mount the file. === teThys [n=jfranji@83-131-30-236.adsl.net.t-com.hr] has joined #ubuntu === lllloo [n=leonel@adsl-225-195-144.mia.bellsouth.net] has joined #ubuntu [01:19] dope: CTRL-C [01:19] okapi: you don't need to do either. To get the smbmnt command to work you can either change the permissions or you can just do the command with a 'sudo'.... [01:20] from the command line? [01:20] mcni7e: the guys really know, even if you might not mention you need it for ubuntu, but who knows they might actually still help, they love ppc [01:20] dope_ ps -A --> search pid of your program --> kill -9 pid === TheJF [n=redfox@mctnnbsa30w-156034045155.nb.aliant.net] has joined #ubuntu [01:20] hi peeps [01:20] sup? [01:20] morphish, will try, thanks for the tip :) [01:20] okapi: you can get around the error by starting the command with 'sudo smbmnt ' [01:20] are there any # irc channels dedicated to tweaking Edgy eft [01:20] ? [01:20] hello [01:20] mcni7e: what tip? i said nothing!? [01:20] nice to meet yas [01:20] lol === niceDay [n=daniel@87.100.54.88] has joined #ubuntu === mzli [n=mzli@221.196.90.13] has joined #ubuntu [01:20] okapi: or you can tell the command to pretend whoever uses it really is root....which is the suid the error mentioned. [01:21] aha me m8y's downloading now and installing [01:21] When I try to install the network-manager(Which I downloaded and transfered because this doesn't my ubuntu doesn't have internet yet) it says Depenency is not satisfiable libnl1-pre6. How can I fix that? [01:21] somebody knows a program wich I can crackin a WEP key with ubuntu??? [01:21] wow I don't make sense... [01:21] JohnM555: install it [01:21] because my ubuntu doesnt have internet is what I was trying to say === inuyasharenegade [i=UPP@c-68-81-7-199.hsd1.de.comcast.net] has joined #ubuntu [01:21] isaac_: aircrackng [01:21] lllloo: not that I know of but there is many websites really but what do you mean by tweaking? [01:21] its done [01:21] morphish: Thats what I'm trying to do [01:22] morphish, well you gave me direction where to possibly look :D that's tip ... isn't? :d [01:22] JohnM555: transfer all deps to that machine the same way you transfered the network manager deb [01:22] <{Malice}> Anyone know of a URL that would help me decide what PDA to get to only work in Ubuntu Edgy? === Puck_ [n=Ovidio@host233-193-dynamic.59-82-r.retail.telecomitalia.it] has joined #ubuntu === opensea [n=opensea@125.213.2.39] has joined #ubuntu [01:22] SHR3K: do you mean done running ./configure? [01:22] kitche build-essentials sone [01:22] morphish: I don't have any other debs :\ [01:22] isaac_: aireplay, airocrack, airodump [01:22] no installed build essentials === jsuther [n=jay@Sutherland-PC.acdmis.com] has joined #ubuntu [01:22] mcni7e: i never said anything, i never sent you to that channel! (/me hides ;P) [01:22] morphish: When I googled for it I got no results [01:22] want me to make file again and see results? [01:22] SHR3K: ok now run ./configure again [01:22] JohnM555: donwload and put them there [01:22] kk [01:22] thor: what happen is I am trying to mount a file through sanba share browser which is in GUI by double clicking on the file. I guess on that case i need to change the permission? [01:23] okapi: do you want another user on that computer to get to the files, or a user on another computer on the network? [01:23] morphish: I would if I knew where to download them. Like I said, Googling gave me no results [01:23] morphish, ah ... ok :D like that ... well no thanks then :D [01:23] jesus === Hanna_ [n=Hanna@pc103.host4.trt.starman.ee] has joined #ubuntu [01:23] tweaking [01:23] did people forget what that means [01:23] LOL [01:23] okapi: no...I think you are misunderstanding samba [01:23] JohnM555: holy cow, nice lengthy list of dependencies [01:23] its to improve edgy eft [01:23] thor: explain to me please... [01:23] boot speeds and such === arch_stanton [n=arch@blk-215-124-112.eastlink.ca] has joined #ubuntu [01:23] mcni7e: "no" problem ;) [01:24] paste.ubuntu-gl.org/30702 [01:24] lllloo: you could tweak your kernel, if you are into that kind of stuff [01:24] okapi: do you want another user on that computer to access the files, or a user on another computer on the network? [01:24] lllloo: this channel is more for basic install help it seems [01:24] thor: actually I am using samba to share file from different computer on the network. === luisito [n=luisito@186sosua109.codetel.net.do] has left #ubuntu [] === squidink [n=vraj@vikpc.its.unimelb.edu.au] has joined #ubuntu [01:25] lllloo: I don't know how upstart works so I can't help with the init editing which is what can make boot speeds faster if you configure it right === TheJF_ [n=redfox@mctnnbsa30w-156034050031.nb.aliant.net] has joined #ubuntu [01:25] <{Malice}> Anyone know of a URL that would tell me known PDA's that work? === lllloo [n=leonel@adsl-225-195-144.mia.bellsouth.net] has left #ubuntu [] [01:25] kitche thats the results is that good orbad? === arnducky [n=ordinary@S01060017ee009b87.cg.shawcable.net] has joined #ubuntu [01:25] okapi: There is a folder on another computer somewhere that you want to access from your computer? === LSorensen [n=lsorense@219.94.118.231] has joined #ubuntu [01:25] SHR3K: looks good is it done? [01:25] thor:I am trying to share file and resources beetwen computer. === kintaro0e [n=kintaro0@203.177.138.178] has joined #ubuntu [01:26] thor: yes, actually there is 4 computers on the network. === wastrel [n=wastrel@dsl254-127-242.nyc1.dsl.speakeasy.net] has joined #ubuntu [01:26] yeah theres a file in there called no-ip created now what? [01:26] SHR3k: make && sudo make install [01:26] Thor: 2 pc run windows and 2 pc run linux (Ubuntu and suse) [01:26] sgorilla80: i just installed but i don't see any icon to access aircrack-ng [01:26] okapi: let's assume you have a folder you want another computer to access. You define it as a share in swat...but you don't need smbmnt...the other guy does. [01:27] kitche you lost me [01:27] isaac_: you will run those programs from command line [01:27] sgorilla80: thanks [01:27] sgorilla80: also you need a patched driver, and your card must be supported [01:27] okapi: the other linux computers will use smbmnt to get to your folder...the windows machines will just access it as part of their 'neighbourhood' === TheJF_ [n=redfox@mctnnbsa30w-156034050031.nb.aliant.net] has left #ubuntu ["Ex-Chat"] [01:27] SHR3K: those commands are used to compile make install will install the software [01:27] so in command i type make && sudo make install? [01:27] ok [01:27] sgorilla80: wich repository i can find airodump and airplay [01:28] okapi: now...if the other guy has a folder you want to get to...he has to have samba and swat and set up a share...and you get to his folder using smbmnt [01:28] anyone had any success using gvim with files on a sftp/scp connection via the gnome-vfs? === kaptengu [n=gurra@c213-100-60-132.swipnet.se] has joined #ubuntu [01:28] okapi: you don't use smbmnt for shares on your own computer...just for shares on the other guy's computer [01:29] Thor: yep you are right but what happen is is I try to access to the folder or file through SMB/CIFS share browser that where the error occur. === pjz [n=pj@zachs.place.org] has joined #ubuntu === zspada15 [n=kvirc@pool-71-116-23-204.eriepa.dsl-w.verizon.net] has joined #ubuntu [01:30] kitch typed sudomake install and it ran theprgram entered details is that it? [01:30] okapi: ok...here we go...in your terminal type 'sudo chmod 4766 /usr/bin/smbmnt' [01:30] how does a chmod have 4 digits? === Spiros [n=chatzill@ppp147-47.adsl.forthnet.gr] has joined #ubuntu [01:30] thor: what is that? explain it to me === uadever [n=meuerro@host74-55-static.18-80-b.business.telecomitalia.it] has joined #ubuntu [01:31] zspada15: the leading one is special bits: setuid, setgid, that kind of thing === badwarrior [i=debian@62.162.226.123] has joined #ubuntu [01:31] ic [01:31] is there a FAQ about running vmware under edgy? === badwarrior slaps chalcedony. [01:31] people [01:31] okapi: the 4 makes the command suid...the rest refer to the rwx...each r is a 4, each w is a 2, and each x is a 1...so rwx=7, r-x=5 (oops...should be 4755...sorry) [01:31] somebody here === nkassi_ [n=nkassi@WK20-156.lewisweb.net] has joined #ubuntu [01:31] who can help me about xchat ubuntu version ? [01:31] pjz: yes [01:31] *hugs* badwarrior [01:31] pjz: google it [01:31] badwarrior, hit start about in xchat === pudland [n=adam@pool-71-126-69-71.phlapa.east.verizon.net] has joined #ubuntu [01:32] badwarrior: lots of people here [01:32] hit help about** [01:32] ye :) [01:32] thor: :) [01:32] people, for xchat ubuntu version i must have linux ubuntu ? [01:32] ...? [01:32] badwarrior, there is no special "ubuntu version" of xchat === SurfnKid [n=SurfnKid@unaffiliated/surfnkid] has joined #ubuntu [01:32] okapi: so after 'sudo chmod 4755 /usr/bin/smbmnt' if you type again 'ls -l /usr/bin/smbmnt' you will see a little change === nkassi [n=nkassi@WK20-156.lewisweb.net] has joined #ubuntu [01:32] thor: without respect how did you learn linux that deep? === Falstius [n=airen@c-71-227-117-166.hsd1.mi.comcast.net] has joined #ubuntu [01:33] the version of xchat installed in ubuntu is xchat 2.6.6 [01:33] okapi: I had a good tutor . [01:33] want to install fglrx w/ radeon 9200. how do i backup xorg? [01:33] chalcedony have ubuntu version [01:33] thor: ok let try [01:33] people, so people please tell me from where i can download linux ubuntu, or somebody can send me ??? [01:33] www.ubuntu.org === sgorilla80 [n=tlp@user-0cet8gf.cable.mindspring.com] has joined #ubuntu [01:33] Crankymonky [01:33] yes [01:33] but i want 3 hours [01:33] .com*** [01:33] thor: can you teach me too ;) [01:33] vhi [01:33] where is the network configuration information stored in edgy? Ever since updating my wireless won't stay configured (everytime I open up networking it says the device isn't configured) [01:33] anyone use lm-sensors in edgy [01:33] okapi: not in one night === uadever [n=meuerro@host74-55-static.18-80-b.business.telecomitalia.it] has left #ubuntu ["you'll] [01:34] hi, how do i know if my WIFI card can have the mac changed [01:34] three hours? [01:34] yep [01:34] sgorilla80, go to #lm-sensors === paulb [n=paulb@c-71-197-218-111.hsd1.wa.comcast.net] has joined #ubuntu [01:34] SurfnKid: ifconfig [01:34] Falstius: /etc/network/interfaces [01:34] so somebody can send me the ubuntu linux ??????? [01:34] so somebody can send me the ubuntu linux ??????? === reZo_ [n=reZo@124.197.16.240] has joined #ubuntu [01:34] badwarrior, you're not making any sense to me honestly. three hours what? [01:34] dude, downloading it through bittorent will be fasest [01:34] and don't spam please === overridex_ is now known as overridex === ogra [i=ogra@ubuntu/member/ogra] has joined #ubuntu [01:34] SurfnKid: no one three === Toma- [n=lin4me@124-168-95-54.dyn.iinet.net.au] has joined #ubuntu [01:34] okapi: now you should see -rwsr-xr-x the 's' means we have set suid (with the 4 in the chmod command) === azuroo [n=www_kopa@212-200-217-156.smin.sezampro.yu] has joined #ubuntu [01:34] man i must wait 3 hours :))))))) === hypatia [n=mary@218-214-66-203.people.net.au] has joined #ubuntu [01:34] *there [01:34] just wait 3 hours, you are downloading a whole OS [01:34] ok [01:34] okapi: you can get a good explanation of chmod by typing 'man chmod' in a terminal [01:34] badwarrior, if your internet connection is slow, there's little i can do about it [01:34] i'll download :D [01:35] ftp://ftp.iasi.roedu.net/mirrors/ubuntulinux.org/releases/kubuntu/6.06/kubuntu-6.06.1-desktop-i386.iso [01:35] from here i can download it [01:35] :) [01:35] that's Kubuntu actually === Nakkel [n=nakkel@vektori.com] has joined #ubuntu [01:35] badwarrior: you can request a cd from the website, but it will take longer than 3 hours [01:36] that will be 3 days :) [01:36] they're really slow with the cd's eh [01:36] blah === jorik [n=olmo@cable-213-132-135-152.upc.chello.be] has joined #ubuntu [01:36] more like 3 weeks [01:36] badwarrior: It'll take more than 3 weeks. [01:36] 6 weeks === Spiros is now known as gtf_spy [01:36] j [01:36] jeffreyb:Where are you? === NDPowerBook [n=ndpowerb@207-172-70-240.c3-0.sbo-ubr2.sbo.ma.cable.rcn.com] has joined #ubuntu [01:36] illinois [01:37] ok and second problem i downloaded a .bin === ejos [n=eric@cpe-70-113-9-152.austin.res.rr.com] has joined #ubuntu [01:37] that is a problem. [01:37] ubuntu edgy takes some minutes to start, all is "fine" until de gdm logi, but after login it takes 2 or 3 minutes to load nautilus, the desktop and stuff === Andrew67 [i=andrew67@206.248.87.51] has joined #ubuntu [01:37] a === azuroo [n=www_kopa@212-200-217-156.smin.sezampro.yu] has left #ubuntu [] [01:37] thor: I have change " rwsr-xr-x" [01:37] what's wrong for me? [01:37] okapi: good...now you won't get that error any more (I hope) [01:37] and i need to place it in filedirectory in a folder i made but i cant it still says permissions === auk [n=scott@h-69-3-117-231.lsanca54.dynamic.covad.net] has joined #ubuntu === plod [i=plod@aurora.ukshells.co.uk] has joined #ubuntu === migui [n=miguel@62-43-38-198.user.ono.com] has joined #ubuntu [01:37] is sysfs missing from ubuntu? [01:37] wastrel: okay, so why doesn't the "networking" tool modify that file? [01:37] i have a minor problem, amarok on gnome, the systray icon appears over hte main menu icon and cant be moved. it does not appear to be sitting in the gnome systray as it is supposed to. anyone got any ideas? [01:38] sgorilla80: no, it is a central part === nikosapi [n=family@ip-151.43.99.216.dsl-cust.ca.inter.net] has joined #ubuntu [01:38] thor: thank you. let me try it [01:38] I'm trying to compile some stuff on this new edgy install and whenever I run make -f Makefile.cvs I get errors like this: /usr/share/aclocal/libglade.m4:7: warning: underquoted definition of AM_PATH_LIBGLADE Any idea what might be causing this? [01:38] Falstius: it really should :] ... are you using different profiles? they live in ~/.config/ [01:38] sgorilla80: ls /sys [01:38] nikosapi: is it in your path? [01:38] variant: that works [01:38] is what in my path? [01:38] any ideas how i can move the .bin into filedirectory woth alarming th permissions? [01:39] nikosapi: AM_PATH_LIBGLADE? === timo90 [n=timo901@cpc3-stkn1-0-0-cust947.midd.cable.ntl.com] has joined #ubuntu [01:39] sgorilla80: i know [01:39] variant: it seems im missing i2c-proc [01:39] if not, you might wanna run sudo apt-get install libglade [01:39] Hey i need some help here [01:39] sgorilla80: try modprob i2c [01:39] okapi: you shouldn't be using smbmnt directly, you should be using smbmount === green-mouse_ [n=green-mo@DSL212-235-116-236.bb.netvision.net.il] has joined #ubuntu [01:39] SHR3K: chmod files or sudo mv [01:39] sgorilla80: could be that your cpu is not supported === blind [n=blind@c-71-234-180-125.hsd1.ct.comcast.net] has joined #ubuntu === green-mouse_ [n=green-mo@DSL212-235-116-236.bb.netvision.net.il] has left #ubuntu ["Leaving"] [01:39] sgorilla80: or i2c is not properly implemented on your mohterboard rather [01:40] (of course your cpu is supported) === ramza3__ [n=ramza3@c-24-99-72-157.hsd1.ga.comcast.net] has joined #ubuntu [01:40] zspada15: if I echo that variable then nothing shows up... === Comrade_S [n=Krush_U@pool-151-203-201-34.bos.east.verizon.net] has joined #ubuntu [01:40] mzli: youve lost me its a.bin and the install file says move to created directory but i cant === caprice [n=caprice@reverse-82-141-53-18.dialin.kamp-dsl.de] has joined #ubuntu === green-mouse [n=green-mo@DSL212-235-116-236.bb.netvision.net.il] has joined #ubuntu [01:40] its a new system i think i eed root [01:40] okapi: in fact, you should really be using 'mount -t smbfs' if I am not mistaken [01:40] sgorilla80: i ran sensors-detect [01:40] SHR3K:Do you want to install it or run it? === timo90 [n=timo901@cpc3-stkn1-0-0-cust947.midd.cable.ntl.com] has left #ubuntu [] [01:40] hmm i guess its not supported [01:40] SHR3K: cd [01:40] install it === Adam_G [n=AKG@adsl-210-96-31.clt.bellsouth.net] has joined #ubuntu [01:41] variant: does that mean i need to write the driver? [01:41] Hello all. My webcam did not work with the drivers supplied with Edgy (spca5xx and pwc) so after some try and error I have managed to make it work, installing another driver (gspcav1 from http://mxhaard.free.fr/download.html ). My question: Is it a good idea to stop the other two drivers from loading? How would I do that? I have tried with modprobe -r (which just runs but does not remove the driver from memory) and [01:41] variant: see how it works in windows, then implement it in linux? [01:41] im in the crated directtory the bin is on desktop [01:41] SHR3K: sudo ./yourfilename.bin [01:41] k === Hansin321 [n=chatzill@c-67-190-5-42.hsd1.co.comcast.net] has joined #ubuntu [01:41] SHR3K:No matter where the bin file is. === pianoboy3333 [n=alex@ool-43567d61.dyn.optonline.net] has joined #ubuntu [01:42] Hello. What package installs the apache config files? I messed mine up and deleted them... but reinstalling apache2-mpm-prefork does not regenerate them. [01:42] sgorilla80: lol, thats somthing you can do if you hav ethe know how but i rather think you would be better finding out if thats actualy the problem first, i am not an expert on that and have not looked into your problem in any depth === kro [n=user@pool-72-84-47-44.clrkwv.east.verizon.net] has joined #ubuntu === mikefoo [n=mikefoo@166.84.140.254] has joined #ubuntu [01:42] Adam_G: not should it. try removing it with "--purge", and then installing again [01:42] command not founf? [01:42] s/not/nor/ [01:42] SHR3K: are you sudo? [01:42] Ok so I had a drive fail in a raid where /boot is - it boots without failed drive in, but when I put new drive in system (to configure into array and all) it stalls at GRUB === skunkworks [n=samco@69-179-8-171.dyn.centurytel.net] has joined #ubuntu === rc-1 [n=whyso@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu === skunkworks [n=samco@69-179-8-171.dyn.centurytel.net] has left #ubuntu [] [01:43] dunno [01:43] cd to the directory of the bin [01:43] i typed su [01:43] sudo not su [01:43] how do i change to desktop again? === nomasteryoda [n=nomaster@ip68-1-150-201.mc.at.cox.net] has joined #ubuntu [01:43] cd ~[username] /Desktop [01:43] What does " underquoted definition " even mean? === tom_ [n=tom@CPE0007e9d8a3a3-CM0014e82726e2.cpe.net.cable.rogers.com] has joined #ubuntu [01:44] i am not save in pokemon [01:44] mikefoo: not hot swappable? [01:44] plz help [01:44] !cli | SHR3K [01:44] SHR3K: The linux terminal or command-line interface is very powerful. Open a terminal via Applications -> Accessories -> Terminal (Gnome) or K-menu -> System -> Konsole (KDE). Manuals: https://help.ubuntu.com/community/BasicCommands === Juan [n=juan@r190-0-149-91.dialup.adsl.anteldata.net.uy] has joined #ubuntu === Juan [n=juan@r190-0-149-91.dialup.adsl.anteldata.net.uy] has left #ubuntu ["Abandonando"] === TheJF_ [n=redfox@mctnnbsa30w-156034053026.nb.aliant.net] has joined #ubuntu [01:44] SHR3K: are you using gui, use terminal === theiron [n=pie@ip68-231-43-153.ph.ph.cox.net] has joined #ubuntu === TheJF_ [n=redfox@mctnnbsa30w-156034053026.nb.aliant.net] has left #ubuntu ["Ex-Chat"] [01:44] paste id 30704 [01:45] GAY GAY GAY GAY GAY GAY GAY GAY GAY GAY GAY [01:45] ? === mode/#ubuntu [+o LjL] by ChanServ === theiron is now known as LOLINTERNET [01:45] ?! === mode/#ubuntu [+b theiron!*@*] by LjL === LOLINTERNET [n=pie@ip68-231-43-153.ph.ph.cox.net] has left #ubuntu [requested] === salome_ [n=salome@cpe-66-65-94-217.nyc.res.rr.com] has joined #ubuntu === Bass [n=Bassetts@cpc2-mapp1-0-0-cust630.nott.cable.ntl.com] has joined #ubuntu === LOLINTERNET [n=pie@ip68-231-43-153.ph.ph.cox.net] has joined #ubuntu === mode/#ubuntu [+b *!*@ip68-231-43-153.ph.ph.cox.net] by LjL === LOLINTERNET [n=pie@ip68-231-43-153.ph.ph.cox.net] has left #ubuntu [requested] === bcstv [n=bcs@dpc6935190052.direcpc.com] has joined #ubuntu [01:45] does anyone know the command to close an ssh session? === kditty [n=kditty@cpe-71-65-120-182.woh.res.rr.com] has joined #ubuntu [01:45] variant: I am on software raid [01:45] exit? === mode/#ubuntu [-b theiron!*@*] by LjL === mode/#ubuntu [-o LjL] by LjL [01:45] mikefoo: ok [01:46] plz help [01:46] i am not save in pokemon [01:46] plz help [01:46] !repeat === Asymmetry [n=Justin@ip72-198-32-122.ok.ok.cox.net] has joined #ubuntu [01:46] Don't feel ignored and repeat your question quickly, if nobody knows your answer, nobody will answer you. You can search https://help.ubuntu.com or http://wiki.ubuntu.com while you wait. Also see !patience [01:46] !patience === funkyHat [n=matt@cpc7-nthc3-0-0-cust812.nrth.cable.ntl.com] has joined #ubuntu [01:46] The people in this channel are volunteers. Your attitude will determine how fast you are helped. See also http://wiki.ubuntu.com/IrcGuidelines [01:46] what this mean [01:46] what it says [01:46] LjL, thanks, I'll try --purge [01:46] not understand [01:46] pokemon? [01:46] tom_: please do not repeat things. [01:47] lol, thanks mcni7e, already tried quit and close and ran out of ideas :) [01:47] falstius yes pokemon you can help???? [01:47] hi!!! ANYbody know WHY konqueror open always the same folders when my machine is rebooted !?!?! === nofxx [i=user@201-048-058-205.xd-dynamic.ctbcnetsuper.com.br] has joined #ubuntu [01:47] Super_King_, did it work? :d [01:47] zspada15: the paste i put up is that correct for sudo === danl [n=danl@152.30.175.26] has joined #ubuntu === JackPhil [n=chatzill@202.107.242.254] has joined #ubuntu [01:47] TIger_IT: you probably have a profile saved! [01:47] yup [01:47] tom_: I just can't figure out why you're asking about that here. I know nothing. [01:47] TIger_IT: you saved the session [01:47] wastrel: OHHH please... telll me === specialbuddy [n=matt@24-236-212-154.dhcp.aldl.mi.charter.com] has joined #ubuntu [01:47] falstius it is pokemon on computer, they tell to come here [01:47] wastrel: How can I delete the session ?! [01:48] is the ubuntu kernel compiled with CONFIG_REGPARM=y? [01:48] wastrel: Its EVERY time I reboot my PC [01:48] TIger_IT: I don't know! I don't use KDE! [01:48] wastrel: :( [01:48] atheros in 2.6.19 [01:48] hey... I was trying to set WPA here... with no sucess so I'm going to try ndiswrapper... but.. I have to download it.. so I set my wifi to Open system... and ubuntu dont connect anymore... even in Open System... i'm using the network tools... doing as I did for open system.. but it dosent work anymore [01:48] anyone having trouble? [01:48] tom_ is using vbaexpress (a frontend to visual boy advance), and he's getting a "Save error" when he tries to save a game into a folder he has write access to. [01:48] yeah === somerville32 [i=Administ@fctnnbsc15w-156034074172.nb.aliant.net] has joined #ubuntu [01:49] ljl i am who? [01:49] Hello. [01:49] Toma-: Can U help me ? [01:49] Are there any ops around? [01:49] somerville32: yes [01:49] We're being spammed on #xubuntu [01:49] ejos: ive pasted this fpr sudo is it correct? PASTE.UBUNTU-NL.ORG/30704 [01:49] Toma-: How can I delete my profile / session >? === _Rappy_ [n=hunt-pre@80-89-35-2.network.itconnect.no] has joined #ubuntu === dougb [n=doug@bdsl.66.14.242.148.gte.net] has joined #ubuntu [01:50] how do you log out of X? === somerville32 [i=Administ@fctnnbsc15w-156034074172.nb.aliant.net] has left #ubuntu ["Leaving"] [01:50] im trying to copy a .bin file over into filesystem but it says permissions all the time [01:50] i think tom_ should be banned becase hes really spamming freenode === B|nTaRa [n=bintara@wbb142.fwa25.jaring.my] has joined #ubuntu [01:50] dougb, did you try to write logout in terminal [01:50] What's the advantage of Ubuntu over Debian for server installs? [01:50] dougb: X runs all the time...do you want to log out of gnome or kde? [01:50] TIger_IT:You shouldnt try to delete them. it may course some problem with your system. [01:50] zspada15 what am i am not doing spamming freenode [01:50] cannot save in pokemon [01:51] mzli: BUT its vert uncortable ! [01:51] zspada15: did you have alookat my paste for sudo you asked for? [01:51] IS IT CORRECT AND WHAT DO I DO NEXT? [01:51] sorry for caps [01:51] mzli: I dont like to close the same folder every time ! [01:51] nope, i'll try it [01:51] it didn't work [01:51] i know that ctrl+alt+backspace restarts it [01:51] but i need to log out of it so i can install the new nvidia drivers [01:51] !caps | SHR3K [01:51] SHR3K: PLEASE DON'T SHOUT! We can read lowercase too. === teledyn [n=teledyn@adsl-71-140-56-243.dsl.pltn13.pacbell.net] has joined #ubuntu [01:51] i sed sorry it wasnt deliberate [01:51] TIger_IT:What's yur main purpose? [01:51] ;) [01:51] is there pokemons in here === freeze [n=45_freez@71-87-167-171.dhcp.jcsn.tn.charter.com] has joined #ubuntu [01:51] who emulators [01:51] help plz === Adam_G [n=AKG@adsl-210-96-31.clt.bellsouth.net] has left #ubuntu ["Thanks,] [01:51] TIger_IT: #kubuntu is good for KDE questions [01:52] hey my 6.10 install keeps freezing at 45%? [01:52] tom_: stop [01:52] md5 sum is good on cd [01:52] yes thor [01:52] mzli: >?? [01:52] zspada15 stop what [01:52] dougb, you can install drivers and restart it ... i think :D [01:52] this is not the place to ask for help [01:52] i want to log out of gnome [01:52] tom_, please stop spamming like this. [01:52] wastrel: oky., thx [01:52] !google | tom_ [01:52] tom_: Google is a very popular search engine: http://www.google.com - Google also has a Linux-specific search engine: http://google.com/linux [01:52] dougb: switch to another tty (alt-f2) and then...try 'init 3' [01:52] no mcni, it said i had to exit out of X [01:52] zspada15 what this is support channel on ubuntu right [01:52] Anyone got any ideas? === reZo [n=reZo@124.197.16.240] has joined #ubuntu [01:52] TIger_IT:what's your problem? I dont know exactly. [01:52] dougb, then you have to kill all x processes ... [01:52] dougb: sorry alt-ctrl-f2 === dartmolx [n=dartmolx@58.71.14.245] has joined #ubuntu === enkidu [n=gilles@lab75-3-82-235-26-179.fbx.proxad.net] has joined #ubuntu [01:53] freeze, no, but you could try the alternate cd perhaps [01:53] what is it? [01:53] zspada15: is that ok or not then? and what do ido with bin file now it says copyto filesystem [01:53] !alternate | freeze [01:53] freeze: The Alternate CD (available as of Dapper) is the classical text-mode installation CD. Use it if you wish to upgrade via CD, or for an "expert" mode install. For normal installs, use the Desktop CD, which is also a "Live" CD. === jack_wyt [n=jack@61.149.0.213] has joined #ubuntu [01:53] SHR3K: send me the link [01:53] how can I erase all my wifi configs ?!!? after some tests ubuntu dosent connect even in a open system wifi !. [01:53] mzli: EVERY time, I restart or start my computer, ... some folders R opened..... with konqueror... BUT I;ve closed! a long time ago!! [01:53] err i have an empty hd [01:54] will the alternate still work? === Stevo [n=steve@c-68-59-27-89.hsd1.sc.comcast.net] has joined #ubuntu [01:54] mzli: Its very streess!! [01:54] freeze: can't see why not [01:54] dougb: you can restart X by typing 'init 5' at the command prompt when you are done [01:54] kk 1 sec === JohnM555 [n=JohnM555@c-69-250-77-243.hsd1.md.comcast.net] has joined #ubuntu [01:54] what does alternate have on it [01:54] ? [01:54] every some is mean [01:54] PASTE.UBUNTU-NL.ORG/30704 === pietro_spina [n=pietro@pool-72-70-79-101.bstnma.east.verizon.net] has joined #ubuntu [01:55] tom_, people are trying to help you, but you don't understand them ... [01:55] mzli: === tom_ is now known as pokemonmariomax1 === lukinhas64bits [i=1000@201.21.232.80] has joined #ubuntu [01:55] mcni7e, no one helps me [01:55] SHR3K: what exactly are you trying to do? [01:56] right it says on instructions to make the bin file an executable === pokemonmariomax1 is now known as pokemon8141996 [01:56] SHR3K: [01:56] yeah === mzli [n=mzli@221.196.90.13] has joined #ubuntu === kaptengu [n=gurra@c213-100-60-132.swipnet.se] has joined #ubuntu === ubuntu__ [n=ubuntu@a81-84-243-4.cpe.netcabo.pt] has joined #ubuntu [01:56] mzli: EVERY time, I restart or start my computer, ... some folders R opened..... with konqueror... BUT I;ve closed! a long time ago!! [01:57] you want to run "sudo chmod a+x [path to bin] [01:57] mzli: hi!!! can U read me ? [01:57] no " though === luisbg [n=d33p@87.217.147.103] has joined #ubuntu === Crankymonky is now known as HackTheVote [01:57] ok but how do i go to desktop again in terminal [01:57] TIger_ITYeah, I know your problem [01:57] ok [01:57] what was the route path [01:57] are you in GNOME or KDE? [01:57] gnome [01:57] ok === coco_ [n=coco@m13.net81-65-90.noos.fr] has joined #ubuntu === fido-dido [n=cedricmc@87.217.56.149] has joined #ubuntu [01:58] run the Applications menu-Applications-Terminal [01:58] mzli: yes >? plese, HELP [01:58] ok === zozo [n=luna@APoitiers-157-1-82-108.w83-203.abo.wanadoo.fr] has joined #ubuntu === Solidus117 [n=s2101283@hoothoot.cit-student.griffith.edu.au] has joined #ubuntu === darkmatter [n=darkmatt@206-163-248-219.yktn.hsdb.sasknet.sk.ca] has joined #ubuntu [01:58] now === HackTheVote is now known as Crankymonky [01:58] TIger_IT:here is the solution, start session manager, start a new session, and when logout, do not save session. [01:58] SHR3K: now run "ls -a | grep (the name of ur bin goes here, no () though)" and tell me the output === moose5435 [n=turkey@adsl-18-174-20.int.bellsouth.net] has joined #ubuntu === C0VER [n=tiago@201008216120.user.veloxzone.com.br] has joined #ubuntu [01:59] is anyone using 6.10? [01:59] mzli: OK, I see,... but how can I start a session manager ? === pega934 [n=pega@hd5e2547d.gavlegardarna.gavle.to] has joined #ubuntu [01:59] 1 sec [01:59] Stevo: me === pokemon8141996 is now known as tom_ [01:59] TIger> how do you like it? (i'm downloading it now) === idontknow [n=harshul@c58-107-78-152.blktn1.nsw.optusnet.com.au] has joined #ubuntu [01:59] How do I find out the UUID of a specific partition? === BadKitt1 [n=soulstic@c-67-182-187-220.hsd1.ca.comcast.net] has joined #ubuntu === yuriy [n=yuriy@dhcp-129-64-153-72.dorm.brandeis.edu] has joined #ubuntu === Solidus117 [n=s2101283@hoothoot.cit-student.griffith.edu.au] has left #ubuntu [] === menko [n=menko@203-184-56-167.jetbuster.co.nz] has left #ubuntu [] [02:00] how do you get | [02:00] lol ok [02:00] got it [02:00] no === Cass [i=Cass@nat/sun/x-fa73e358534d5f1c] has joined #ubuntu [02:00] Anyone use gdesklets? [02:00] how can I erase all my wifi configs ?!!? after some tests ubuntu dosent connect even in a open system wifi !. [02:00] i did but didnt like 'em [02:00] BadKitt> i do. [02:01] linux is on pc next to me here i go | and line but there i cant [02:01] SHR3K: | is shift+ backspace [02:01] ok [02:01] TIger_IT: in KDE Component [02:01] Stevo: Im new to all this cool stuff... I just downloaded it.. how do I run it??? [02:01] no it just deltes [02:01] run Ubuntu? [02:01] !uuid | Asymmetry [02:01] back slash sorry [02:01] Asymmetry: To see a list of your devices/partitions and their corresponding UUID's, run this command in the terminal: "blkid" === bandeira [n=bandeira@201.75.14.251] has joined #ubuntu [02:01] oh, sorry BadKitt, i thought.. nm. lol === reqage [n=reqage@74.141.69.254] has joined #ubuntu [02:01] Yup: edgy with beryl [02:02] shift + backslash [02:02] anyone know a quick & easy way to capture streaming audio to a file for playback later? [02:02] is the ubuntu kernel compiled with CONFIG_REGPARM=y? [02:02] ok [02:02] mzli: Thanks! [02:02] Bad> have you installed it? [02:02] yes [02:02] Through synaptic === SmrtJustin [n=SmrtJust@72.241.106.60] has joined #ubuntu === Lonnie [n=lonnie@12.158.211.162] has joined #ubuntu [02:03] just comes up with \ on linux [02:03] on windows | [02:03] LjL, thanks. [02:03] Streamtuner is a pretty decent program for ripping streaming audio [02:03] someone wanna help SHR3K? [02:03] lol [02:03] PLEASE REPLACE BACKUP MEMORY === pianoboy3333 [n=alex@ool-43567d61.dyn.optonline.net] has left #ubuntu ["Leaving"] [02:03] !caps [02:03] PLEASE DON'T SHOUT! We can read lowercase too. [02:04] SHR3K: its not that i dont want to [02:04] you should just be able to go to Applications/Accessories/GDesklets [02:04] !gdesklet [02:04] gDesklets provides an advanced architecture for desktop applets -- tiny displays sitting on your desktop in a symbiotic relationship of eye candy and usefulness. Homepage is http://gdesklets.gnomedesktop.org/ [02:04] i know its annoying me [02:04] !beingannoying | tom_ [02:04] Sorry, I don't know anything about beingannoying - try searching on http://bots.ubuntulinux.nl/factoids.cgi [02:04] got an idea give me a min [02:04] i am say please replace backup memory [02:04] on pokemon [02:04] !pastebin [02:04] pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (you can always find it in the channel topic, among other useful things) === shedii [n=siggi@inferno.lhi.is] has joined #ubuntu === zerdith_ [n=zerdith@71-10-25-60.dhcp.bycy.mi.charter.com] has joined #ubuntu [02:05] that or open CLI and type gdesklets === rauble [n=andrew@pool-71-254-252-161.hrbgpa.dsl-w.verizon.net] has joined #ubuntu === Milk [n=None@74.134.57.120] has joined #ubuntu [02:05] anyone else having issues with cedega? === Born_In_Xixax [n=dstaudt@adsl-70-240-51-203.dsl.okcyok.swbell.net] has joined #ubuntu === dope [n=fuacer@70-20.202-68.tampabay.res.rr.com] has joined #ubuntu [02:06] anyone know how to get wake on lan working? [02:06] !ask [02:06] Don't ask to ask a question. Just ask your question :) === BelialMkII [n=Dave@62.6.163.130] has joined #ubuntu [02:06] dope, set it in the BIOS? [02:06] i did [02:06] how do i activate it === Falstius [n=airen@c-71-227-117-166.hsd1.mi.comcast.net] has left #ubuntu [] [02:06] well, i used to simply ping the machine i wanted to wake up [02:06] For my wireless, what would I have to setup before I should expect iwlist eth2 scan to return any results [02:06] dope, you need a program to insert the card you wanna wake MAC [02:07] Right now its not returning any results === gasbag [n=gasbag@68-189-241-88.dhcp.oxfr.ma.charter.com] has joined #ubuntu [02:07] i think wol is a diferent protocol then ping [02:07] hmm === sittisal_ [n=sittisal@host99-28-dynamic.57-82-r.retail.telecomitalia.it] has joined #ubuntu === SlyGuy [n=cduhard@S0106001839555d34.wp.shawcable.net] has joined #ubuntu === tale_ [n=tale@cpe-024-088-253-167.nc.res.rr.com] has joined #ubuntu [02:07] nofxx, i don't know, i do know that some Windows computers i used to manage did wake on ping [02:07] dope it's easy to activate the [02:08] wol at the bios === strabes [n=strabes@wcnat-50-253.wheaton.edu] has joined #ubuntu [02:08] it's enabled in the bios [02:08] !info etherwake [02:08] zspada15: pm [02:08] etherwake: A little tool to send magic Wake-on-LAN packets. In component universe, is optional. Version 1.09-1 (edgy), package size 9 kB, installed size 72 kB [02:08] !info wakeonlan [02:08] wakeonlan: Sends 'magic packets' to wake-on-LAN enabled ethernet adapters. In component universe, is optional. Version 0.41-4 (edgy), package size 10 kB, installed size 72 kB [02:08] LjL i see.. never tested with ping.. don't know.... just with programs made for wol.... === shwag [n=steven@66.101.109.10] has joined #ubuntu [02:08] but that they are different protocols, i'm sure [02:08] i'm on a windows machine [02:08] dope but maybe you must activate wake on pci event instead [02:08] yea i did [02:08] same thing [02:08] that's what it said in the bios anyway [02:09] so 'backports' just contains newer version of stuff already in 'main' ? === ZirJoker [n=joker@189.165.57.17] has joined #ubuntu [02:09] does anyone know what that OSX like dock is for linux? [02:09] shwag: not necessarily in main [02:09] now you must send a magic packet to the mac [02:09] which cd burner is the best? [02:09] dope , correct me but... if every card wakes on ping or whatever else protocol.. it will be impossible to sleep hehehe [02:09] !best | ZirJoker [02:09] ZirJoker: Usually, there is no single "best" application to perform a given task. It's up to you to choose among a number of different applications, depending on your preferences, the features you require, and other factors. === ailean [n=ailean@82-40-205-105.stb.ubr07.uddi.blueyonder.co.uk] has joined #ubuntu [02:09] LjL: or in universe....but its just newer versions though. [02:09] SlyGuy: there's one that's a gdesklets/karamba plugin i think. [02:09] i dunno :x === Spee_Der [n=n1gke@ip68-14-29-148.ri.ri.cox.net] has left #ubuntu [] === kaptengu [n=gurra@c213-100-60-132.swipnet.se] has joined #ubuntu [02:09] but yes, shwag, it contains applications that were requested to be ported back from the development version [02:09] ok the most efficient cd burner program? [02:09] nofxx wake is with wol, shutdown is with admin access [02:09] dope, search for "windows wol" [02:09] i don't crap about gdesklets :) [02:10] shwag, well, actually i think you can get new packages as well [02:10] i don't know crap rather === fabbione [n=fabbione@vpn-nat.fabbione.net] has joined #ubuntu [02:10] LjL: hmm...sounds kinda like universe [02:10] I see there's a new splash screen for the "beta drivers". It doesn't actually *say* "Beta" on it. Are they no longer beta? [02:10] zspada15:om again :P [02:10] ok, thx buddies [02:10] i am really digging beryl though [02:10] fido-dido , you did get it.. i mean that if a pc wakes on every packet it will never sleep... [02:10] LjL: why dont they just make universe and backports one ? [02:10] SlyGuy, it's cool eh? [02:10] fido-dido , didn't [02:10] dope now u can install cygwin to use etherwake [02:10] for sure [02:10] shwag: you don't get new packages or even new versions of existing packages in Universe, at all [02:10] :/ === Xaphoo [n=cgrenier@adsl-75-35-152-41.dsl.pltn13.sbcglobal.net] has joined #ubuntu [02:10] SlyGuy, a lot of people don't see the point in it [02:10] shwag, besides, universe is a component, backports is a repository (which has "main", "restricted", "universe" and "multiverse" sections) [02:10] i have a nice sharp osx like emerald theme [02:10] how do I config my ALSA to play out of 5.1 speakers? [02:10] !info ati [02:10] Package ati does not exist in any distro I know [02:11] what are 5.1 speakers [02:11] very fast and the jiggling never gets boring [02:11] I have an old laptop that will Not Boot *buntu media, so I have installed Debian stable and upgraded to testing. Is there a decent link for *buntu sources lists, and is it even possible to uprade to say, Xubuntu from Debian testing? === zozo [n=luna@APoitiers-157-1-82-108.w83-203.abo.wanadoo.fr] has left #ubuntu [] [02:11] SlyGuy, mine's kinda like vista atm, but i was playing around with it. don't reckon i'll keep it that way [02:11] wastrel: 5.1 channel [02:11] shwag, we have several repositories: X, X-updates, X-security, X-backports, X-proposed (with X being a distribution, like "edgy"), and each of them is divided into components [02:11] my other box is an iMac so i am used to that now [02:11] even after 10 years of windows [02:11] LjL: what do each of the components mean then ? === ViLi [n=vili@a88-112-232-63.elisa-laajakaista.fi] has joined #ubuntu === BadKitt1 [n=soulstic@c-67-182-187-220.hsd1.ca.comcast.net] has left #ubuntu [] [02:12] SlyGuy: imacs have 5.1 channel? 0.o [02:12] hey.. how can I default my wifi configs ? I did some tests with wpa_supplicant and now it dosent connect even on Open System AP..... [02:12] Ubotu, please tell shwag about repos [02:12] zspada15 - pm again === leek [n=leek@217.25.18.225] has joined #ubuntu === sean [n=sean@cpe-069-132-052-158.carolina.res.rr.com] has joined #ubuntu [02:12] huh? [02:12] you ask the bot with "please" ? [02:12] SHR3K: google please [02:12] shwag: in short, main is free stuff mantained by the core devs. universe is free stuff mantained by the community. restricted is non-free by the core devs. multiverse is non-free by the community [02:12] SlyGuy, i'm still trying to move away from windows. I want to do it before vista is compulsory. but it's the couple of apps that are holding me back. and i like to play poker online [02:12] hey, is anyone else noticing bugs with the new NVIDIA drivers as compared to the beta ones? I'm getting a sort of "tearing", where parts of the screen don't update properly until something forces them to [02:12] ok [02:12] why is unison missing from edgy? === linuxboy_ [n=anon@yoda.frogfoot.net] has joined #ubuntu [02:13] I see there's a new splash screen for the "beta drivers". It doesn't actually *say* "Beta" on it. Are they no longer beta? [02:13] i play a ton of poker === pitti [i=pitti@ubuntu/member/pitti] has left #ubuntu ["bye"] [02:13] im going sleep try and sort it tomz cya [02:13] <3 unison [02:13] thanks fpr help [02:13] my imac is dual boot just to play poker [02:13] SlyGuy: WHAT? lol [02:13] SlyGuy, if you want to talk, go to #ubuntu-offtopic [02:13] !info unison [02:13] unison: A file-synchronization tool for Unix and Windows. In component universe, is optional. Version 2.13.16-4ubuntu1 (edgy), package size 466 kB, installed size 1120 kB [02:13] wastrel: uses rsync but can be bidirectional === sean is now known as SeanTater [02:14] ah, okay, so I'm new to ubuntu (now running kubuntu) but a veteran debian user [02:14] zspada15: problem? [02:14] no problem [02:14] what's a universe and how do I add the optional ones? [02:14] SlyGuy, this chan is for problems, that's all. no one's told us off, yet :) [02:14] ok back to gdesklets [02:14] what are they? :)P [02:14] LjL: thanks [02:15] pjz: go to System->Administration->Software Sources [02:15] SlyGuy, small applets like calculators, weather forecasts etc. like on apple [02:15] ahh [02:15] pjz: universe is free sw that's community maintained, and you can enable it by uncommenting the universe lines in sources.list [02:15] where does one find them? [02:15] I have an old laptop that will Not Boot *buntu media, so I have installed Debian stable and upgraded to testing. Is there a decent link for *buntu sources lists, and is it even possible to uprade to say, Xubuntu from Debian testing? [02:15] SlyGuy, i think they're in the repos [02:16] iter: thanks === Hawk|- [n=Hawk@p549CBBB5.dip0.t-ipconnect.de] has joined #ubuntu [02:16] Super_King_: thanks [02:16] np, I was a longtime debian user myself [02:16] I think you'll like ubuntu [02:17] can anyone answer Lonnie? [02:17] Lonnie: it may be possible but it's ill-advised === chewy [n=chewy@cpe-72-178-165-179.rgv.res.rr.com] has joined #ubuntu === Jordan_U [n=jordan@h-68-165-173-113.snvacaid.dynamic.covad.net] has joined #ubuntu [02:17] after installing Xgl i can't get 3d acceleration anymore [02:17] iter: well, I still run debian on my servers, but I was neer happy with its desktop stuff. I'm now putting kubuntu in front of my wife as a desktop === kaptengu [n=gurra@c213-100-60-132.swipnet.se] has joined #ubuntu === Groovebot [n=guv@adsl-157-114-191.clt.bellsouth.net] has joined #ubuntu [02:18] Lonnie: if you have a floppy you can do etherboot/tftp to get ubuntu installed [02:18] something about Xlib: extension "XFree86-DRI" missing on display ":0.0". [02:18] X Error of failed request: BadMatch (invalid parameter attributes) [02:18] Major opcode of failed request: 142 (GLX) [02:18] Minor opcode of failed request: 5 (X_GLXMakeCurrent) [02:18] Serial number of failed request: 30 [02:18] Current serial number in output stream: 30 [02:18] !pastebin | chewy [02:18] Lonnie, have you tried with the Alternate CD? [02:18] chewy: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (you can always find it in the channel topic, among other useful things) [02:18] ok' ill do that next time === bob [n=paied@unaffiliated/elenothar] has joined #ubuntu [02:18] iter: with vmware for her old stuff, though I'm trying to wean her off of windoze. [02:18] so any ideas why Xgl killed my 3d drivers? [02:18] Is electricsheep broken in edgy? I can only run it with --mplayer [02:18] hi [02:18] I just installed the network-manager, but I don't know how to access it [02:18] can anyone help me? [02:18] i didn't even touch xorg.conf === Yancho [n=yancho@195.158.87.23] has joined #ubuntu [02:18] lol [02:19] LjL: where can I learn about package management on ubuntu, and dpkg ? [02:19] !nvidia [02:19] To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto [02:19] !ati [02:19] chewy, there's a channel called #ubuntu-xgl. it might be better for you === Sonicvana [n=garrett@cblmdm72-240-97-94.buckeyecom.net] has joined #ubuntu [02:19] iter: Well, it really isn't a production machine. The machine only has 64meg of ram and a P133, and have tried all manner of CDs, booted Mepis I'm thinking but crashed do to lack of ram. [02:19] I really like the fact that kubuntu at least tires to deal with me having both an ATI and an nvidia card each with its own monitor [02:19] !espanol [02:19] Sorry, I don't know anything about espanol - try searching on http://bots.ubuntulinux.nl/factoids.cgi [02:19] xubuntu doesn't even try [02:19] !espaol [02:19] !es [02:19] shwag: waht kind of level are you at? [02:19] Sorry, I don't know anything about espaol - try searching on http://bots.ubuntulinux.nl/factoids.cgi === Brokenstein [n=user@pool-71-255-223-248.bltmmd.east.verizon.net] has joined #ubuntu [02:19] http://dev.opsat.net/kateos_human.html === valentin__ [n=valentin@189.143.41.58] has joined #ubuntu [02:19] lonnie: the Live CDs will likely not boot with 64MB ram, 192 or so is the minimum [02:19] apokryphos: im an expert at gentoo === valentin__ [n=valentin@189.143.41.58] has left #ubuntu ["Abandonando"] [02:20] !spanish [02:20] Sorry, I don't know anything about spanish - try searching on http://bots.ubuntulinux.nl/factoids.cgi [02:20] shwag: http://librenix.com/?inode=5707 [02:20] shwag: then /msg ubotu components ; /msg ubotu apt-get [02:20] shwag: apt-get tutorial [02:20] you may be able to boot/install with the Alternate CD, but I think you will not be happy with Ubuntu performance with that little RAM, without very drastic modification [02:20] Groovebot, quieres hablar espaol? [02:20] s [02:20] 256 is minimum for ubuntu [02:20] va a #ubuntu-es === Lahey [n=chatzill@CPE000d8846b4a2-CM000039050c63.cpe.net.cable.rogers.com] has joined #ubuntu === ToonArmy [n=chris@Lafrowda-14.ex.ac.uk] has joined #ubuntu [02:20] gracias :) [02:20] cool [02:20] de nada === hypatia [n=mary@218-214-66-203.people.net.au] has left #ubuntu ["Leaving"] === akai-- [n=akai@dfh72.neoplus.adsl.tpnet.pl] has joined #ubuntu [02:20] Born_In_Xixax: Yep, have hit that, I do have a floppy, I did the three floppy net-install of Debian on there. [02:20] hehe nice restaurant spanish [02:20] dope: http://en.wikipedia.org/wiki/Wake-on-LAN [02:20] i have several semi-older pc's that run fine with 128MB [02:20] Does anyone know why I would be getting errors trying to set a key for my wireless interface? [02:20] shwag: i'll have the bot give you a few more pointers as well === stas [n=stas@pool-72-75-72-68.washdc.east.verizon.net] has joined #ubuntu [02:21] i ran xubuntu nicely with 96 megs of sdram on a pentium 3 [02:21] hello all, can i get some help [02:21] iter, i was in spain for two months there. my spanish isn't bad actually :) especially for a scot === akai-- [n=akai@dfh72.neoplus.adsl.tpnet.pl] has left #ubuntu ["Ja] === Cas_ [n=cas@61.144.198.94] has joined #ubuntu [02:21] !helpme [02:21] Don't ask to ask a question. Just ask your question :) [02:21] does this mean anything to anyone (it comes from fgl_glxgears) [02:21] Born_In_Xixax: get more RAM; RAM's cheap, the only limit should be what the motherboard supports [02:21] Xlib: extension "XFree86-DRI" missing on display ":0.0". [02:21] JohnM555 , god have mercy of you bro.. i'm more then a week trying to set my wifi to work [02:21] true never tried xubuntu, you may be able to be usable with 96MB...64 I think will still be tough [02:21] JohnM555: Is it WEP or WPA? === darren [n=darren@72.174.196.10] has joined #ubuntu [02:21] it always says ' Error for wireless request "Set Encode" (8B2)" Set failed on device eth2 : Unknown error 523 [02:21] Jordan: WEP [02:21] getting more ram isnt always an option [02:21] it's an old laptop though, may be difficult to get ram for it? [02:22] i am about to download Ubuntu, what does it come with, any links that have the programs, I want it for desktop and server use === whaley [n=whaley@cpe-071-068-048-109.carolina.res.rr.com] has joined #ubuntu [02:22] nofxx: Thanks, I need it I spent ALL yesterday trying to get wifi to work [02:22] Yep, ram is maxed out at 64 meg. [02:22] Lonnie: how old is this thing? [02:22] Lonnie: your wife is going to hate using that machine === wastrel [n=wastrel@nylug/member/wastrel] has left #ubuntu ["l8r"] [02:22] Lonnie: with only 64mb ram === Amaranth [i=travis@ubuntu/member/amaranth] has joined #ubuntu === sizzam [n=sizzam@c-68-63-136-126.hsd1.pa.comcast.net] has joined #ubuntu [02:22] 97 vintage Hitachi laptop. :-D [02:22] Guess nobody knows :\ [02:22] Lonnie: make it into a router and get a $600 dell :) [02:23] hehe [02:23] how do i find my mac address [02:23] JohnM555 , i managed to set wep working only with the network tools GUI... [02:23] dope: ifconfig -a [02:23] Lonnie, check out Xubuntu instead. [02:23] thx [02:23] nofxx: Is that in System>Administration? [02:23] anybody === blujay [n=first@adsl-68-95-147-181.dsl.rcsntx.swbell.net] has joined #ubuntu [02:23] Heh, She has a 650 Celeron, this old Hitachi is my favorite TOY computer, running Gentoo on a 2600+ AMD 64 with a gig of ram. [02:23] Lahey, hi === Cas_ is now known as Cas [02:23] JohnM555: Yes. [02:24] shwag: the basic structure is: dpkg does the hard work of installing and removing .deb packages (a .deb is an 'ar' archive containing two '.tar.gz' archives) - APT is the thing that knows about repositories and how to solve dependencies, and then calls dpkg to do the installs (repositories are http or ftp servers with a special directory structure, and each repository can have a number of components) - apt-get, aptitude, synaptic, adept etc. are [02:24] front-ends to APT - aptitude is a bit special in that it does a bit of dependency-managing work itself [02:24] Lahey, check out the homepage at www.ubuntu.com for a list. For questions, ask us [02:24] hi, i am about to download Ubuntu, what does it come with, any links that have the programs, I want it for desktop and server use === bob [n=paied@unaffiliated/elenothar] has left #ubuntu ["Not] [02:24] JohnM555 , i think it is.... then I tryed wpa, and now I can't connect even on open system.... [02:24] nofxx: I don't see how that helps set up the wireless, I thought that just lets you monitor it [02:24] the network tools one [02:24] k thanks [02:24] Ubotu, please tell Lahey about packages [02:24] Lahey, you can download an iso from that page [02:24] Lahey, and try it without installing it [02:24] the Networking Gui doesn't let me change much, and what I do change doesn't work [02:24] Lahey, so you can see for yourself [02:24] live iso [02:24] !packages [02:24] I have been trying to use iwconfig commands, but I always get errors setting the key [02:24] You can browse and search for Ubuntu packages using !Synaptic, !Adept, "apt-cache search ", the "apt:/" URL in KDE, or online at http://packages.ubuntu.com - Ubuntu has about 20000 packages available, so please *search* for an official package before installing things in awkward ways! [02:25] JohnM555 , system > admin > networking [02:25] howcome I can only use one app that uses sound at a time? i.e. if i have quodlibet open and want to watch a video on firefox i have to close both and then reopen firefox [02:25] ailean; getting something I can boot the machine with has been my biggest problem, that is why I went back to Debian. [02:25] Lonnie: google the inspiron 2650 it's a pretty nice budget laptop === bobbie__4 [n=Bobbie@S01060050046f293e.vc.shawcable.net] has joined #ubuntu [02:25] Lonnie, is it an old machine? [02:25] Lahey: well, it's called Desktop CD, and it's actually the main CD that you use to install Ubuntu - but it also acts as a "live" CD, yes [02:25] ailean: p133 64mb === sizzam is now known as sizzam_away [02:25] nofxx: did you only modify the ESSID and password? or did you change the ip address and such? [02:25] yup it was dell's first pntium 4 [02:25] Lahey, is it an old machine? [02:25] sweet [02:25] strabes: Are you using OSS, or ALSA? === user-land3 [n=user-lan@217-162-168-80.dclient.hispeed.ch] has joined #ubuntu [02:25] Jordan_U: whatever is the default with ubuntu [02:25] ita an AMD Athlone xp [02:26] Brokenstein: Wally world just had a 3400+ AMD system with 512 and a DVD for $400. [02:26] JohnM555 , only essid and key , the dhcp thing will depend on your AP === sizzam_away is now known as sizzam [02:26] JohnM555 , does it give you an IP automaticaly ? then go with dhcp.... [02:26] iter, Lonnie: isn't that too old to even use?? :) [02:26] ailean; yes, 97 version. [02:26] AMD Athlon Xp 1.8ghz [02:26] ailean [02:26] nofxx: I believe it does... :\ [02:26] Jordan_U: which is better and which will fix the above problem? === BelialMkII [n=Dave@62.6.163.130] has joined #ubuntu [02:26] hmm about same price range [02:26] nofxx: But Its not working for me, I have changed the essid and password already [02:27] ailean: heavens no, runs Debian just fine, a bit slow, but runs it fine. [02:27] JohnM555 , well try dhcp... you are connect to your own AP or some ISP ? [02:27] strabes: Alsa is better, and that is what Ubuntu uses by default. [02:27] My own. [02:27] Lonnie, Xubuntu is supposed to be for older machines. i would think they would have a way round this... [02:27] Jordan_U: ok then i'm using alsa; do you have any idea why it does this? [02:27] DamnSmallLinux will work well if nothing else [02:27] JohnM555 , you have wifi connection ? I mean... you are connected but dont have a IP or you are not connected at all ? [02:28] nofxx: And i have tried it, it still doesn't work. When I try iwlist eth2 scan I get no results too === xp_prg [n=anonymou@ftp.microvu.com] has joined #ubuntu [02:28] Lahey, you got the page up? Ubuntu should run very well on your system [02:28] nofxx: Not connected at all === maria [n=maria@bas11-montrealak-1177722528.dsl.bell.ca] has joined #ubuntu === boggle [n=spindler@modemcable057.248-203-24.mc.videotron.ca] has joined #ubuntu [02:28] hi all, I am new to ubuntu, do I use apt to install things? [02:28] or like yum? [02:28] xp_prg: you can, or you use synaptic [02:28] xp_prg: use aptitude. =) [02:28] ailean; that is the *buntu I was thinking of, looks like it is Possible to get Ubuntu installed and then upgrade to Xubuntu, but looks like it is a PITA. [02:28] JohnM555 , try "iwconfig" check if the options are ok [02:28] ya i got it, it takes me 6.06.1 === kawa [n=kawa@88.157.85.86] has joined #ubuntu === joonhwan [n=user@211.51.211.2] has joined #ubuntu [02:29] xp_prg: aptitude = super cow powers [02:29] strabes: Some programs still use OSS though, including flash 7 [02:29] nofxx: I think messing with the gui made it worse, the options seem to have gone away [02:29] it the i386 version for me? [02:29] what would be the command to load the package dealing with libstdc++-libc6.2-2.so.3: cannot open shared object file === Suspekt [n=ghost@c-69-255-54-65.hsd1.md.comcast.net] has joined #ubuntu [02:29] also when I type y I get z [02:29] JohnM555, your wifi is on eth2 ? what kind of device it is ?? [02:29] I actually think I'm cursed and ubuntu hates me... [02:29] I think the keyboard is in like a german mode [02:29] anyone in here a raid expert? [02:29] Jordan_U: so I can't get around it with flash 7? does flash 9 fix that? === magickal1 [n=magickal@adsl-067-034-187-072.sip.mco.bellsouth.net] has joined #ubuntu [02:29] how do I make it an english mode? [02:29] hi guys, i just went to my network places, and i went to mshome, then my windows computer, then i right clicked on my dvdrom, and clicked connect to this server, so now when i go to my computer, i see DVD Rom there on the left hand side, and it has an icon which says SMB, now i wanted to wine something off that remote share, but how do i get to it in command line? or mount it to another folder so i can make it my cd rom in wine? [02:29] Here is the question of the day, Can you revert an installation? Edgy just aint cutting it and the random crashes are just too much to handle [02:29] Suspekt: mdadm, what else do you need to know ? [02:29] if it is connected with a ethernet blue cable, you need to configure thoguth the device web front.. .not the operational system [02:29] Lahey, precede everything you say to me with "ailean" or i might miss it. most likely that is the version for you, yes [02:29] nofxx: Um its a netgear wg121 usb, I am using the ndiswrapper to get the driver to work [02:29] while trying to upgrade to edgy i got this error: to fetch ftp:ftp.nerim.net.debian-marillat/dists/unstable/Release.gpg Could not resolve 'ftp.nerim.net.debian-marillat' [02:29] Failed to fetch ftp:ftp.nerim.net.debian-marillat/dists/unstable/main/binary-i386/Packages.gz Could not resolve 'ftp.nerim.net.debian-marillat' [02:29] question please: has upgrading from dapper to edgy (using update-manager) become any easier or stable lately? Also, anyone know of any blocker packages I should probabl uninstall before I try it again? === Vaun [n=jws141@pool-151-204-24-71.pskn.east.verizon.net] has joined #ubuntu [02:29] ailean : I may have to try getting Tom's boot floppy and see about getting the Xubuntu CD booted up that way, was hoping that I could just change the sources lists and do and upgrade. [02:30] xp_prg: you use the APT system to install packages on Ubuntu. there are a few frontends available: Synaptic (Gnome), Adept (KDE), apt-get (command line) and aptitude (command line, text interface) are probably the most used ones [02:30] JohnM555, ahh I see [02:30] anybody know what it could mean? [02:30] strabes: Yes, flash 9 fixes that problem, and with other programs you can work around it using aoss... === lancetw [n=lancetw@140.128.194.90] has joined #ubuntu [02:30] Lahey, 6.06 is not the most recent version, but it does have long term support [02:30] LjL do you know the package dealing with the lib I nee? [02:30] d [02:30] iter, i am trying to build a mirror out of hda1 and hdb1, both formating with fat32 [02:30] nofxx: That is, if I did things right [02:30] hi there ... what a mess ... [02:30] Lonnie, sorry i can't be of any help to you! [02:30] iter, i can figure out the syntax of mdadm, [02:30] xp_prg: i'm not familiar with libstdc++ versions, but you could maybe try 'sudo aptitude install libstdc++6' [02:30] nofxx: After setting my options in iwconfig, is there anything else I need to do? [02:30] Jordan_U: sweet thanks for your help [02:30] NP ailean, you tried, and that's all I can ask. [02:30] Suspekt: http://www.networknewz.com/2003/0113.html [02:31] Lahey: you should think whether you want 6.06 (Dapper) or 6.10 (Edgy). Edgy is the newest version, but Dapper is "LTS" (long time support) [02:31] JohnM555 , sometimes a restart make thing work.. hehe.. try setting it all clicking the OKays and a good restart.. might do it [02:31] is ubuntu a guarantee that i will have a DRM free experience? [02:31] Lonnie, 99% of comps these days have no prob booting from a cd [02:31] Here is the question of the day, Can you revert an installation? I need to revert back to Dapper Edgy is just TOO unstable [02:31] JohnM555 , in theory, not.. xD [02:31] nofxx: lol ok [02:31] botxj: if you mean that you won't be able to play DRM protected content, probably yes [02:31] strabes: sudo apt-get install alsa-oss then run the application, but with aoss in front of it like: aoss firefox [02:31] iter, yeah i was trying to use raidtools but it turns out edgy don't come with it or somesuch [02:31] i so dont understand DRM [02:31] Suspekt: raidtools is depricated [02:32] I have managed to boot off three CDs with that machine, hell, it won't even boot up a win98 CD there ailean. ;-) === JDStone [n=JDStone@adsl-69-110-128-56.dsl.irvnca.pacbell.net] has joined #ubuntu [02:32] magickal1: downgrades aren't supported. [02:32] magickal1, how do you find it unstable? I have to say, i haven't had any problems [02:32] Suspekt: mdadm replaces it [02:32] ailean, should i go with the newest one? [02:32] botxj: its just infinitive prime numbers [02:32] Jordan_U: awesome man thanks for your help === SeanTater [n=sean@cpe-069-132-052-158.carolina.res.rr.com] has joined #ubuntu [02:32] strabes: np [02:32] Lonnie, can i take it you know how to set the bios settings? I don't want to insult your intelligence :) [02:32] iter, gotcha, so does the file i put into /etc/raidtab need to be removed? [02:32] what is the command to install vncserver? === inglor [n=orit@87.68.169.148.cable.012.net.il] has joined #ubuntu [02:32] ailean, random system lockups, Its like running Windows95 [02:32] ailean: if Lonnie can get debian installed he better be able to get into the bios :p [02:32] Ugh, it never finds my AP, but it finds my neighbors, even though I don't get a signal from it === c_lisp [n=codecain@70.118.183.141] has joined #ubuntu [02:33] what port do Azureus need to be [02:33] Suspekt: yes [02:33] magickal1: can't you just reinstall? this is one instance where putting /home in a different partition is useful. [02:33] k [02:33] it keeps complaining [02:33] !aptitude | xp_prg [02:33] xp_prg: aptitude is another terminal-based front-end to APT, like apt-get. However, aptitude can remember the dependencies installed with a package and remove them if you uninstall. See https://help.ubuntu.com/community/AptitudeSurvivalGuide [02:33] Lahey, the newest one IS stable, but the 6.06 one has support for longer. if you want to update every sixth months, go for edgy [02:33] NP there either, yep, have been switching that BIOS between floppy and CD for about four years now. [02:33] hey, just installed dapper, about to patch it to edgy with the update manager [02:33] iter, i know :) [02:33] /home is on an entirely different drive [02:33] JohnM555 , check if your AP is broadcasting the SSID [02:33] iter, rm-ed === floppyears [n=floppy@poipu/supporter/floppyears] has joined #ubuntu [02:33] nofxx: Its not, does it need to be? [02:33] hi [02:33] magickal1, you're sure it isn't anything to do with your hardware? does it behave this way under, for example, winXP? [02:33] ailean, what do you mean dapper has support for longer? doesn't edgy have support for 6 months more? [02:33] !lts | inglor [02:33] inglor: LTS means Long Term Support. LTS versions of Ubuntu will be supported for 3 years on the desktop, and 5 years on the server. [02:33] inglor: dapper has 5 year support. === rpedro [n=rpedro@87-196-32-2.net.novis.pt] has joined #ubuntu [02:33] Thanks iter, I needed that. [02:33] nofxx: It was working in Windowx without it broadcasting [02:34] I have a set of files on the server that I'm working on, and I would like to backup the files on a nightly basis [02:34] ailean, ill stick with Dapper then [02:34] inglor, no, Dapper has LTS status, and Edgy doesn't. [02:34] floppyears: rsync [02:34] nofxx: Its working on my laptop(this computer) without it broadcasting [02:34] LTS? [02:34] xp_prg, note that in edgy, apt can now also remember what dependencies were installed with a progam and remove them automatically also. === to_s [n=dshimy@204.16.72.211] has joined #ubuntu [02:34] !LTS [02:34] LTS means Long Term Support. LTS versions of Ubuntu will be supported for 3 years on the desktop, and 5 years on the server. [02:34] Lahey, you can always upgrade later if you change your mind [02:34] LjL and ailean, thanks, I didn't know that [02:34] JohnM555 , yeah... it suppose to work, but that answer the question why you can't see... [02:34] can rsync be used to copy the files over to another box and to copy only the files that have been modified ? [02:34] XP is on another drive ( 3 HDDs on the system ) no Ive been running Ubuntu on the smame hardware for 18 months [02:34] ailean, is it simple to upgrade === siXy [n=james@88-96-183-190.dsl.zen.co.uk] has joined #ubuntu === tich_ [n=bradley@bas3-montreal02-1096689592.dsl.bell.ca] has joined #ubuntu [02:34] floppyears: yes and yes [02:34] will the next release that will come after dapper have LTS> [02:34] *? [02:34] So yeah this is the upgrade [02:34] nofxx: Alright thanks I'll go change it. [02:34] ailean: sudo apt-get distupgrade [02:34] *after edgy [02:34] JohnM555 , there is a cool app "Wifi-radar" [02:34] Lahey, once you get the basics of how Ubuntu works, yes. VERY simple. it's one line actually. [02:34] nofxx: I have that actually [02:34] JohnM555 , maybe it could help ya [02:35] Thank you all, I will probably just have to leave Debian on that old box and get something a Bit newer for one fo the *buntus. [02:35] nofxx: I swear Ive tried everything [02:35] ailean: Ok i should tell you, I have never used Linux before [02:35] nofxx: That app has a problem connecting [02:35] Lahey, sudo apt-get distupgrade upgrades the whole OS :) [02:35] magickal1: if you want to downgrade, i'd say just backup all your data and reinstall. [02:35] no clue in the logs. syslog.messages dmesg X locks up hard no mouse netowrk dies === doctorow [n=doctorow@68-65-221-88.vnnyca.adelphia.net] has joined #ubuntu [02:35] ailean: os that where i can download programs the I want === linlin [n=will@c-71-194-70-13.hsd1.il.comcast.net] has joined #ubuntu [02:35] Lahey, well, be careful not to overwrite your data. have backups. but it's very easy to install and this chan is here to help [02:36] does anyone know how to change the owner of a folder? [02:36] nofxx: What mode do you use, Managed? [02:36] thanks iter [02:36] to myself from root? [02:36] JohnM555 , I wish I could help you more... but I'm new in linux too.... and I'm lost too [02:36] maria: chown [02:36] JohnM555 , yes.. managed is when you connect to a AP, ad-hoc for no ap [02:36] Lahey, OS = operating system === darkseed [n=Miranda@61.187.54.11] has joined #ubuntu [02:36] nofxx: Any help is good [02:36] hey, does the new rhythembox in edgy have the ability to fully communicate (add songs) with the iPod as people told me? [02:36] ailean: i ment to say is [02:36] This is why I have multipul HDD's :) Ill grab an older disk and go from there === Alethes [n=alethes@unaffiliated/alethes] has joined #ubuntu [02:36] I have Ubuntu Edgy on a Thinkpad T60p; I just rebooted and when I went into "Network settings" my WiFi wasn't visible. I rebooted again and Ethernet wasn't visible anymore either. Help! [02:36] nofxx: How long is your key, and do you have -'s in between it? [02:36] maria: 'sudo chown owner:group foo' [02:37] Thanks all, later. [02:37] inglor, i don't know if edgy+1 will have LTS. probably not [02:37] Thanks for the time [02:37] nofxx: Mine is 10, I'm not sure if thats normal or not === Lonnie [n=lonnie@12.158.211.162] has left #ubuntu ["Leaving"] [02:37] LTS is probably more like edgy+3 =) [02:37] dortorow, where did you go to network settings in? edgy? try running ifconfig and see what it spits [02:37] Lahey, yes, using apt. But not everything is textual. There is a graphical tool to download your programs === juca_truca [n=daniel@80.243.87.78] has joined #ubuntu === cosmodad [n=johndoe@dslb-088-064-189-049.pools.arcor-ip.net] has joined #ubuntu === no0tic [n=no0tic@151.52.89.96] has joined #ubuntu [02:37] what prot does Azureus need to be on? [02:37] inglor: ifconfig only shows lo -- no ethernet interfaces [02:38] I have never seen this kind of support in my life, this is great!!! [02:38] hi!!!! [02:38] why in edgy there isn't anymore specific kernels? [02:38] Lahey: To install applications, you can go to Applications -> add remove, for command line apps and more advanced features you can use System -> Administration -> Synaptic, and from the command line you can use apt-get. [02:38] iter, $ Error opening dev/md0/ no such file or directory [02:38] c_lisp: you can set it to whatever you want. generally, i use 6881-6889(default) for bt stuff though. [02:38] doctorow, try iwconfig, anything? [02:38] no0tic, i was curious about that myself [02:38] I've had so many people try to help me...I think they all give up though :) [02:38] doctorow, did you try checking your BIOS? [02:38] JohnM555 , dont remember... I was trying WPA.. then now it wont connect even with open system .... its really annoying [02:38] anyone can help me to install java in my browser??? [02:38] ailean: Ok, ill run it and see how it is, also can i cluster with this OS [02:38] Lahey, youll learn, little by little. But you can start with almost no knowledge [02:38] inglor: it says "no wireless extenions" [02:38] nofxx: ok [02:39] inglor: I don't know how to check my BIOS [02:39] Lahey, what do you want to do exactly? [02:39] !java | juca_truca [02:39] ailean: perfect! [02:39] juca_truca: To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository === fnf [n=vanhtu19@58.187.89.117] has joined #ubuntu === Sonic|Laptop [n=garrett@unaffiliated/sonicvanajr] has joined #ubuntu [02:39] Terminus, i did it, and got no error, but the folder still belongs to root? [02:39] juca_truca: sudo aptitude install sun-java5-jre [02:39] gets error [02:39] maria: what exactly did you type? [02:39] nofxx: Do you happen to know the program that cracks wep keys...maybe it will magically work on my wireless [02:39] Lahey, the short answer is yes, anyway [02:39] sudo chown maria /media/mydvd [02:40] doctorow, reboot your computer and tap F2 constantly (if it's a centrino), then see if all the wireless and wired extensions are available [02:40] ailean: im looking for a desktop and maybe server OS, that I can scale later on, such as adding another machine to form a cluster or something [02:40] Terminus :sudo chown maria /media/mydvd [02:40] Lahey, http://www.ram.org/computing/linux/linux_cluster.html [02:40] Lahey, it's linux. Linux clusters [02:40] doctorow, if you have an external usb wifi card for example, try hooking it to the computer and see if it detects it, that could isolate the problem === thor [n=diogenes@gulfal-host-cip525-01.gulftel.com] has joined #ubuntu [02:40] maria: and /media/mydvd is your dvd drive? you'll have to alter fstab for that i think. === lotheac [n=lotheac@62.216.103.169] has joined #ubuntu [02:40] terminus : its not its just a folder i made [02:40] iter, ...sudo helps lol [02:40] ailean: i was just on this site, very good link === no0tic [n=no0tic@151.52.89.96] has left #ubuntu ["A] [02:41] terminus : i was going to copy some files into it and make it the cdrom for wine [02:41] Lahey, how do you think i found it? :) [02:41] inglor I don't have any external cards -- this is just tjhe stuff that came with the thinkpad [02:41] maria: and maria is a valid username? 'try sudo chown maria:maria /media/mydvd' [02:41] my usb drive automounts in gnome, but I normally run enlightenment. Anyone know how to get it to automount in e (or fluxbox, etc)? [02:41] iter, nope that didn't work eatehr [02:41] thanks [02:41] inglor I've entered the "BIOS Setup Untility" === harusari [n=harusari@211.35.72.124] has joined #ubuntu [02:41] it's work [02:41] doctorow, see if you can find anything about the wireless there [02:42] Lahey, do try out the Live CD before installing anything, okay? [02:42] terminus : no error, but its still belonging to root [02:42] ailean: you are a linux help god. [02:42] JohnM555 , i can't find... my bookmark are worst then my room.. xD [02:42] anybody could suggest a brainstorming program like "mindmap"? [02:42] ailean: I will, and ill tell you all about it [02:42] lol [02:42] Lahey, no, you'll meet them when you have some real problems [02:42] Lahey, i'm a bit of a newbie [02:42] nofxx: haha its ok :) [02:42] Lahey, but I'm well able to help you :) [02:42] !find mindmap | harusari [02:43] Package/file mindmap does not exist in edgy [02:43] maria: what does 'ls -l /media/mydvd' say? sounds more like a permission problem than an ownership problem. [02:43] anybody have issues using imap on the latest evolution? [02:43] maria: 'ls -l /media' i mean. [02:43] LjL, is there a mindmap on ubuntu? [02:43] ailean: Ok this is my second time on IRC, beat that. I AM KING n00b [02:43] harusari: nevermind the bot :-\ there's this three: kdissert - mindmapping tool planfacile - Generate a document from a mindmap vym - mindmapping tool [02:43] Suspekt: obviously all that needs to be run as root [02:43] JohnM555 , i even saw a video about this program for linux... lots of plugins for cracking stuff...hmmm.....will have to remember... [02:43] Lahey, well, listen to me then. TRY THE LIVE CD BEFORE INSTALLING :) [02:43] Terminus, it says its owned by me [02:44] inglor It says "Internal Wireless Device Enabled" and "Internal Network Device enabled" [02:44] maria: can you paste the line for mydvd? [02:44] iter, sudo won't work... it won't allow me to create the device it seems [02:44] nofxx: I'm looking now, but if I'll find it is another story [02:44] ailean: I will,, === ubuntu_ [n=ubuntu@ppp-69-219-187-162.dsl.chcgil.ameritech.net] has joined #ubuntu [02:44] LjL, i'll find them, thanx [02:44] d--------- 2 maria maria 4096 2006-11-08 20:23 mydvd [02:44] harusari: they're all Qt though, except for planfacile, which doesn't list any dependencies [02:44] Lahey, but that said, there's only one way to learn, and I learned by installing when it was much more difficult [02:44] And I need to go in 15, can't miss lost :) [02:44] harusari: find them? === cryptonic [n=cryptoni@193.203.136.175] has joined #ubuntu [02:44] Ubotu, please tell harusari about packages [02:44] harusari: you shouldn't have to search for them [02:44] doctorow, try downloading a windows xp live CD and checking if it's a software<-> ACPI issue, also are there any hardware switches maybe you just didn't click the right ones [02:44] maria: 'chmod 0755 /media/mydvd' [02:44] Suspekt: mdadm --create --verbose /dev/md0 --level=1 --raid-devices=2 /dev/hda1 /dev/hdb1 === magickal1 [n=magickal@adsl-067-034-187-072.sip.mco.bellsouth.net] has left #ubuntu [] === magickal1 [n=magickal@adsl-067-034-187-072.sip.mco.bellsouth.net] has joined #ubuntu [02:45] how do i check what graphics driver is on default? === magickal1 [n=magickal@adsl-067-034-187-072.sip.mco.bellsouth.net] has left #ubuntu ["Ex-Chat"] === magickal1 [n=magickal@adsl-067-034-187-072.sip.mco.bellsouth.net] has joined #ubuntu [02:45] JohnM555 , huahua found it http://midnightresearch.com/projects/wicrawl/ [02:45] V i have nothing but time, i think i will enjoy this very much. [02:45] Suspekt: (assuming your drives are hda and hdb) [02:45] iter yeah thats the exact syntax i did... im going to try it doing a sudo bash first right? [02:45] cryptonic, what do you mean? [02:45] Thanks :) [02:45] Terminus, hey it worked, i just dont know what i did :) im sure this would of just been easier to mount my dvdrom on my other computer to this one, but im so lost its amazing [02:45] nvidia drivers [02:45] ailean: is there anything else i should know [02:45] Suspekt: right, and you have to have hda1 hdb1 too [02:45] i installed the new ones but dont think there working [02:46] inglor I have never used Windows and the machine doesn't presently have an optical drive (I pulled out the optical and installed another SATA HDD). I can reinstall the optical drive, but I have no idea how to do anything in XP [02:46] maria: it was a permissions problem. chown changed the owner just fine. =) === ethan [n=ethan@69.39.23.237] has joined #ubuntu === ethan [n=ethan@69.39.23.237] has left #ubuntu [] === Paul_ [n=administ@12-192-126-200.fibertel.com.ar] has joined #ubuntu === Vaun [n=jws141@pool-151-204-24-71.pskn.east.verizon.net] has joined #ubuntu [02:46] Terminus, want to help me mount my dvd rom from my windows pc to this one :) ? [02:46] Now I need to figure out how to install a tgz file [02:46] iter, it still says error opening md0 no such file or directory [02:46] Lahey, if you have trouble, throw in the disc again, and boot back up. you can get back into this channel through the instant mesenger program. take note of the server name and the channel and you can ask whatever questions you like [02:46] inglor : nvidia drivers [02:47] crypronic, you mean the version? [02:47] yeah [02:47] Suspekt: are the partitions in use? [02:47] iter good point let me maker sure they are not mounted [02:47] Lahey, but i have my mother and father in-law using Ubuntu. If they can do it, so can you [02:47] Suspekt: you should not have a /dev/md0 until you run that command [02:47] doctorow, hmm, no optical drive... lemme see [02:48] inglor : yeah [02:48] cryptonic: run glxinfo | grep direct and post the output. [02:48] inglor I just rebooted after checking the BIOS and it's showing my ethernet but not my wifi [02:48] iter, right, thats why that isn't a very good error message lol === StikkitJim [n=James@cpc1-staf3-0-0-cust99.brhm.cable.ntl.com] has joined #ubuntu [02:48] doctorow, this sounds odd, my guess would be an hardware error === Versed [n=Versed@c-69-253-173-154.hsd1.nj.comcast.net] has joined #ubuntu === max_ [n=max@163.106.40.24.aeneasdsl.com] has joined #ubuntu [02:48] ailean: OMG, im just glad there is so much support for linux, Thanks You So Much.... === tw|sT3d [i=rave@203.167.67.157] has joined #ubuntu [02:49] cryptonic@Johns-Desktop:~$ /home/cryptonic/sauerbraten/sauerbraten_unixexec: 39: ./bin_unix/linux_client: not found [02:49] Well...I give up fpr today, thanks nofxx [02:49] cryptonic@Johns-Desktop:~$ glxinfo [02:49] name of display: :0.0 [02:49] Xlib: extension "GLX" missing on display ":0.0". [02:49] Xlib: extension "GLX" missing on display ":0.0". [02:49] Lahey: Best part about Ubuntu IMHO :) [02:49] hi. when you rip somthing with the KAudioCreator, where does it put it? [02:49] Xlib: extension "GLX" missing on display ":0.0". [02:49] Error: couldn't find RGB GLX visual [02:49] visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav [02:49] id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat [02:49] ---------------------------------------------------------------------- [02:49] !paste | cryptonic [02:49] cryptonic: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (you can always find it in the channel topic, among other useful things) [02:49] Xlib: extension "GLX" missing on display ":0.0". === reZo [n=reZo@124.197.16.240] has joined #ubuntu [02:49] Lahey, how else would we get people to give it a shot? [02:49] Xlib: extension "GLX" missing on display ":0.0". [02:49] 0x21 24 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None === Maledictus [n=Malebob@dslb-084-061-120-168.pools.arcor-ip.net] has joined #ubuntu [02:49] Xlib: extension "GLX" missing on display ":0.0". [02:49] cryptonic: use pastebin [02:49] please [02:49] Xlib: extension "GLX" missing on display ":0.0". [02:49] 0x22 24 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None [02:49] Xlib: extension "GLX" missing on display ":0.0". [02:49] cryptonic, STOPPIT [02:49] cryptonic, pastebin [02:49] Xlib: extension "GLX" missing on display ":0.0". [02:49] 0x5a 32 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None [02:49] cryptonic@Johns-Desktop:~$ [02:49] soz === jtf0518 [n=jaytee@c-69-137-243-25.hsd1.in.comcast.net] has joined #ubuntu [02:49] wow [02:49] hi. when you rip somthing with the KAudioCreator, where does it put it? [02:50] !paste | cryptonic [02:50] cryptonic: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (you can always find it in the channel topic, among other useful things) === bruenig [n=bruenig@adsl-69-154-79-208.dsl.rcsntx.swbell.net] has joined #ubuntu === mode/#ubuntu [+o LjL] by ChanServ === RodrigoX [n=Rodrigo@201-74-134-179-sj.cpe.vivax.com.br] has joined #ubuntu [02:50] cryptonic, does it find both when using the liveCD? [02:50] max, prob in the /home directory [02:50] guys.. i dont have this directory >> /dev/modem why is it??? === fido-dido [n=cedricmc@87.217.56.149] has joined #ubuntu === chewy [n=chewy@cpe-72-178-165-179.rgv.res.rr.com] has joined #ubuntu === javaJake [n=javaJake@pool-72-70-10-151.bstnma.east.verizon.net] has joined #ubuntu === mode/#ubuntu [-o LjL] by LjL [02:50] ailean: its an added feature the OS i guess. [02:50] Hello everyone. [02:50] lol [02:50] ailean: thats what i thought too, but its not [02:51] cryptonic: run "glxinfo | grep direct" and post the output. It should be only one line, if it isn't then use pastebin. [02:51] Lahey, when you know a bit more, try to help people yourself [02:51] inglor : dunno, when booting from live cd i have to use noapic [02:51] anyone know how to mount a samba mounted folder, to a permanent folder? [02:51] max_, did you show the hidden folders? it might be under the /home/user/.KAudioCreator/ folder... [02:51] maria, you need to add a line to /etc/fstab [02:52] I'm trying to get 3D acell working, a common problem to be sure. Xorg.0.log reports that it has enabled Direct Rendering, but glxinfo says something different. Xorg.0.log: http://pastebin.com/820115 Xorg.conf: http://pastebin.com/820120 Syslog: http://pastebin.com/820118 [02:52] LjL : how do i get the samba folders address? [02:52] ailean: I will, i think i will be on #ubuntu alot, just reading the messages that go by, one can learn. [02:52] !samba | maria [02:52] maria: samba is the way to cooperate with Windows environments. Links with more info: https://wiki.ubuntu.com/MountWindowsSharesPermanently http://help.ubuntu.com/ubuntu/serverguide/C/windows-networking.html Samba can be administered via the web with SWAT [02:52] maria: http://doc.gwos.org/index.php/HowToMountsmbfsSharesPermanently [02:52] that isnt a folder [02:52] guys.. i dont have this directory >> /dev/modem why is it??? [02:52] tw|sT3d, why should you? [02:52] tw|sT3d, maybe your modem isn't installed [02:52] tw|sT3d: well, it's not supposed to be a directory to start with [02:52] iter, no, they were not mounted [02:52] ailean: Also you will hate me in about a week, all the Q?'s ill have and such [02:52] tw|sT3d, it's supposed to be a file === robertj_ [n=robertj@68-117-223-90.dhcp.athn.ga.charter.com] has joined #ubuntu [02:53] maria: well, that's a bit complicated. =) [02:53] !cifs [02:53] Sorry, I don't know anything about cifs - try searching on http://bots.ubuntulinux.nl/factoids.cgi === Madpilot [n=brian@ubuntu/member/madpilot] has joined #ubuntu [02:53] Lahey, it's fine. if i'm fed up with you, i'll leave :P === xeem [n=tonci@89-172-106-36.adsl.net.t-com.hr] has joined #ubuntu === socomm [n=socomm@cpe-76-166-49-201.socal.res.rr.com] has joined #ubuntu [02:53] bah... my cifs factoid didn't get in. [02:53] maria, Just be sure to use cifs, not samba! [02:53] Suspekt: dmesg | grep hd === markl_ [i=mark@c-67-166-114-6.hsd1.ut.comcast.net] has joined #ubuntu [02:53] javaJake, whats that? [02:53] maria: i can't memorize the parameters that i use for mount -t smbfs. [02:53] Hi there. I have an urgent problem with Edgy. Can someone pls assist? === Bassetts [n=Bassetts@cpc2-mapp1-0-0-cust630.nott.cable.ntl.com] has joined #ubuntu [02:53] Terminus: when did you try adding it? [02:53] !ask | xeem [02:53] xeem: Don't ask to ask a question. Just ask your question :) [02:53] s/smbfs/cifs/ [02:53] Suspekt: see what you get there make sure your hdds are what you think they are === CablD_Ubuntu [n=cabldevi@ool-4573d8bb.dyn.optonline.net] has joined #ubuntu [02:53] LjL: i can't remember. [02:53] maria, It is samba enhanced. It is more stable (samba freezes for many at login and at boot) === freeze [n=45_freez@71-87-167-171.dhcp.jcsn.tn.charter.com] has joined #ubuntu [02:54] maria: Trying to mount a smb share? [02:54] ailean: Ok good, i dont want to take up you time, there are people out there that need you! Thanks for the help! YOU ROCK [02:54] socomm : yeah [02:54] I'm trying to get 3D acell working, a common problem to be sure. Xorg.0.log reports that it has enabled Direct Rendering, but glxinfo says something different. Xorg.0.log: http://pastebin.com/820115 Xorg.conf: http://pastebin.com/820120 Syslog: http://pastebin.com/820118 [02:54] maria: Try smbmount. [02:54] Jordan_U : http://paste.ubuntu-nl.org/30710/plain/ === ailean rocks === javaJake shakes his head [02:54] cifs = common internet file system, the succesor to samba, it's backwards compatible [02:54] sda1 and sdb1' [02:54] lol [02:54] ;) [02:55] LjL: it was just a long mount command anyway... [02:55] Suspekt: mdadm --create --verbose /dev/md0 --level=1 --raid-devices=2 /dev/sda1 /dev/sdb1 === Lahey very happy [02:55] ailean: im trying 2 install may modem but i cnt do it.. =(( i did try the scanModem === javaJake is not [02:55] ;) [02:55] javaJake, you irish? [02:55] iter thats what i did [02:55] ailean, No [02:55] tw|sT3d, i've never had to do that. sorry [02:55] !CIFS === Eleaf [n=ethan@69.39.23.237] has joined #ubuntu [02:55] Sorry, I don't know anything about CIFS - try searching on http://bots.ubuntulinux.nl/factoids.cgi [02:55] Ty, so Q: I have a problem stopping x. I use "telinit 3" and kill manager, but asap I log in the x server starts itself back. How can I prevent it from stopping and stay in shell. (I can't find inittab and those rcN files in /etc/event.d don't help). Thank you. [02:55] ailean, Well, there's a bit of Irish in me, but not a lot [02:55] javaJake, how do i install it? i tried apt-get install cifs and it didnt find anything [02:55] heh, thought ubotu was case sensitive. [02:55] javaJake, i saw the "to be sure" :) === Hawk||- [n=Hawk@p549CBEA9.dip0.t-ipconnect.de] has joined #ubuntu [02:55] how did u install ur modem? [02:55] Suspekt: are sda1 and sdb1 the same size? [02:55] airlean : Hurray for Ireland [02:55] ailean, Oh, heheh, yea, well.... [02:56] iter, yes [02:56] tw|sT3d, i have a cable modem. didn't need to install ethernet access [02:56] maria: aptitude install smbfs [02:56] Is anyone here experienced with Xorg to help me? [02:56] =(( [02:56] !anyone [02:56] A large amount of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? [02:56] Xorg.0.log reports that it has enabled Direct Rendering, but glxinfo says something different. Xorg.0.log: http://pastebin.com/820115 Xorg.conf: http://pastebin.com/820120 Syslog: http://pastebin.com/820118 [02:56] ailean : Hurray for Ireland [02:56] iter, its possible this is an issue with my 'hardware' raid provided by the promise controler [02:56] cryptonic: OK, run "sudo dpkg-reconfigure xserver-xorg -phigh" and choose the nvidea driver when prompted. [02:56] cryptonic, i'm scottish :) [02:57] Suspekt: might be but I doubt it [02:57] javaJake: Option "RenderAccel" "false" #More stable this way... I think === mluser-work [n=MYoda@12.149.189.42] has joined #ubuntu [02:57] javaJake: and that comment is wrong === FidO-DidO [n=cedricmc@87.217.56.149] has joined #ubuntu === alc [n=alecs@162.105.30.184] has joined #ubuntu [02:57] apokryphos, Yuck yuck, doy. :D === inuyasharenegade [i=UPP@c-68-81-7-199.hsd1.de.comcast.net] has joined #ubuntu [02:57] iter, ok... the goal is to get this raid working with both sides... my linux box and my DirectX9 box === B_166-ER-X [n=ghost@c207.134.47-108.clta.globetrotter.net] has joined #ubuntu [02:57] apokryphos, I'll give it the good ol' shot. === chewy [n=chewy@cpe-72-178-165-179.rgv.res.rr.com] has joined #ubuntu [02:58] is there a way to use the rss-glx screensavers (flurry, lattice, etc.) with xscreensaver instead of just gnome-screensaver? [02:58] javaJake: so s/false/true/ [02:58] Suspekt: perhaps this link might help [02:58] i switched to xscreensaver and now i can't see the rss-glx screensavers [02:58] hey [02:58] apokryphos, Yep [02:58] Suspekt: http://users.piuha.net/martti/comp/ubuntu/raid.html [02:58] Anyone willing to have a short private chat with me about my "bootlevel" problem? In here it is quite messy. [02:58] iter, is it because i am attempting to use vfat [02:58] does your system have to be up to date when using gksudo "update-manager -c" [02:58] ? [02:58] is there any news on the eclipse problem with 64bit edgy systems? [02:58] Jordan_U how do i use the latest drivers, is it nvidia or nv drivers i choose? [02:59] javaJake: though actually I've never used ATI, so I'm not sure if hardware acceleration is enabled in the same way === Ashley` [n=TXtoucia@ppp117-210.lns1.bne4.internode.on.net] has joined #ubuntu [02:59] okay, now i have a question. i set up my GRUB with a selection for Windows, which is installed on my 2nd (slave) hard disc. It works. No problem there. But whenever I load up Windows from GRUB, the second (slave) hard disc claims the boot again and just launches windows instead of going to GRUB. what can i do? [02:59] Suspekt: don't know [02:59] apokryphos, well, worth a shot [02:59] bc im on 6.06 and i used that command and i dont se " New distribution release '6.10' is available, UPGRADE" [02:59] certainly [02:59] Suspekt: bbialb === cpw [n=chris@gentoo/developer/ChrisWhite] has joined #ubuntu === Gnewf [n=Gnewf@GroupMackenzie.s11-1-0-16-0.ar3.SEA1.gblx.net] has joined #ubuntu [02:59] iter, bbialb? [02:59] apokryphos, BRB... going to try that === esoteric [n=kevind@84-203-37-251.mysmart.ie] has joined #ubuntu [03:00] Q: I have a problem stopping X. I use "telinit 3" and kill manager, but asap I log in to console, the x server starts itself back. How can I prevent it from stopping and stay in shell. (I can't find inittab and those rcN files in /etc/event.d don't help). Thank you [03:00] freeze: is all of your stuff up to date currently? === loutrine [n=lew~@static-203-192-64-14.sa.chariot.net.au] has joined #ubuntu [03:00] when Xorg bitches about fonts what do i need to do to fix it === UFO64 [i=me@MURRAYJM8.umeres.maine.edu] has joined #Ubuntu === powercat [n=powercat@modemcable198.39-80-70.mc.videotron.ca] has joined #ubuntu [03:00] when it won't start cause of it [03:00] cryptonic: I think this is covered in help.ubuntu.com, how to use the nvidia and ati drivers [03:00] cryptonic: nvidea. [03:00] Flannel no [03:00] says 188 updates === Bass [n=Bassetts@cpc2-mapp1-0-0-cust630.nott.cable.ntl.com] has joined #ubuntu [03:01] I got beryl installed, but for some reason it's not showing any of the "window decorator" I'm using nvidia [03:01] i just installed 6.06 without knowing about 6.10 [03:01] On two of my Ubuntu Edgy upgrades, clicking a location from the Places menu sometimes spawns a random number of new instances of the nautilus file browser. Is anyone else having this problem? [03:01] i cant start Xgl cause it crys about fonts [03:01] powercat: i'm having trouble with Xgl [03:01] powercat, did you type "beryl-manager" in a terminal? === Apoll1 [i=wallason@c-71-194-81-247.hsd1.il.comcast.net] has joined #ubuntu [03:01] freeze: 6.06? or 6.06.1? you'll want to be up-to-date before upgrading, or at least, have update-manager up to date [03:01] powercat: its crying about fonts [03:01] Ubotu, please tell chewy about xgl [03:01] freeze: then it will take less downloading / time to download the Edgy CD. [03:01] ailean: It's already opened. When I choose beryl as my manager, all windows lose their borders and the X at the corner. It's just a square. [03:01] flannel how do i check === loutrine [n=lew~@static-203-192-64-14.sa.chariot.net.au] has joined #ubuntu [03:02] edgy cd kept freezing [03:02] chewy: I'm as much a noob as you are. I wouldn't know [03:02] so i made a dapper cd === joonhwan [n=user@211.51.211.2] has left #ubuntu ["No] === draconius [n=j00@incognito.student.iastate.edu] has joined #ubuntu === jazzrocker [n=jahjah@unaffiliated/jazzrocker] has left #ubuntu ["bye"] [03:02] powercat, sounds like it's not installed properly. there is a channel set up for these problems at #ubuntu-xgl [03:02] freeze: check what? 6.06 or 6.06.1? there's no difference, you'd have to check which ISO you downloaded. If you just got it, it's most likely 6.06.1, but anyway, that's far less important. Update update-manager (I believe the upgrade howto mentions that) then try again [03:03] what would be a goog Benchmark program for the CPU , on ubuntu ? [03:03] Thanks ailean === loutrine [n=lew~@static-203-192-64-14.sa.chariot.net.au] has joined #ubuntu [03:03] powercat, np === esoteric [n=kevind@84-203-37-251.mysmart.ie] has joined #ubuntu === Papi [n=fuacer@70-20.202-68.tampabay.res.rr.com] has joined #ubuntu [03:03] you guys still here? I'm getting an odd error, can't ping google [03:03] flannel i dont see anything about updating update-manager === calamari [n=calamari@ip72-200-73-175.tc.ph.cox.net] has joined #ubuntu [03:04] hi === esoteric [n=kevind@84-203-37-251.mysmart.ie] has left #ubuntu ["Leaving"] === Languid [n=Languid@student3-0196.unh.edu] has joined #ubuntu [03:04] inglor: Are you connected with ethernet or wireless? === BoggsBeer [n=biglou@203-206-110-129.dyn.iinet.net.au] has joined #ubuntu === lew [n=lew~@static-203-192-64-14.sa.chariot.net.au] has joined #ubuntu === loutrine [n=lew~@static-203-192-64-14.sa.chariot.net.au] has left #ubuntu ["Leaving"] [03:04] inglor: can you ping 209.85.135.99 ? [03:04] Jordan_U, ethernet [03:05] LjL, yeah, I can === Hyperion2010 [n=Hyperion@128.135.6.200] has joined #ubuntu [03:05] freeze: you're right. It's not in there. Anyway, you'll want to update update-manager then try again === MistaED [n=mistaed@87.212.233.220.exetel.com.au] has joined #ubuntu [03:05] if my livecd kernel panics on me, is there anything I can do to get around it? [03:05] inglor: then i guess your DNS settings are wrong... can you ping other sites, or reach them in the browser? [03:05] hi im trying to install edgy on my desktop computer which has two HDs set up as RAID0. the edgy installer sees them as two 160GB drives when it should be one. is there anyway i can get ubuntu to recognize them as a RAID drives? [03:05] Ubotu, please tell Hyperion2010 about install [03:05] flannel, thanks got it :) [03:05] i see 6.10 upgrade available now [03:05] teehehe [03:05] tyvm [03:05] iter, any suggestions? [03:05] my smokey blue icon theme seems to be gone now that I upgraded to edgy. I tracked it down to the package gnome-themes. The description still mentions the theme, but I guess it was forgotten. Any ideas how to get it back? === javaJake [n=javaJake@pool-72-70-10-151.bstnma.east.verizon.net] has joined #ubuntu [03:06] apokryphos, That didn't work [03:06] LjL, nope, it worked fine a minute ago [03:06] re instasll it [03:06] china === noaXess_kubuntu_ [n=noaXess_@cust.static.217-11-45-147.cybernet.ch] has joined #ubuntu === empty_mind [n=orion@59.176.111.177] has joined #ubuntu [03:06] Hyperion2010: Yes, you can change the kernel parameters at boot, try for instastance adding: noapci [03:06] inglor, check the nameserver entry (if any) in /etc/resolv.conf and make sure it's the actual DNS server [03:06] new york === eltech [n=eltech--@ool-457c9421.dyn.optonline.net] has joined #ubuntu [03:06] ok, I'll look into it, thanks [03:06] distance [03:06] hey how do i change the word after @ sign in terminal [03:06] javaJake: I just suggest checking google if you already checked in the ubuntu wiki guide for ati trivers [03:06] can i install a package from edgy into a drapper box ? [03:07] btw, is there anyway to just dump an install on a partition, and then compile a kernel from another linux environment? === jdmulloy [n=jdmulloy@pool-68-160-169-83.bos.east.verizon.net] has joined #ubuntu [03:07] empty_mind: no [03:07] apokryphos, But what do I google? The logs all have sucess messages. Nothing error-ish. [03:07] empty_mind: you can possibly get the source package and compile it [03:07] LjL, got two entries, [03:07] not sure if they're right or not [03:07] empty...you could but it might depend on another app which might depend on another and it will just all need to be upgraded [03:07] xchat update the channel list when I enter in a server, what I can do to stop it???? [03:07] javaJake: well you're not going to get an error if you haven't declared the option properly. Google something like direct rendering ati linux [03:07] inglor: what are they [03:07] hi im trying to install edgy on my desktop computer which has two HDs set up as RAID0. the edgy installer sees them as two 160GB drives when it should be one. is there anyway i can get ubuntu to recognize them as a RAID drives? anyone? [03:07] Hyperion2010: Do you have another Linux machine? [03:08] whats the fglrx command to test the driver? === FunnyLookinHat [n=david@64.140.73.93] has joined #ubuntu [03:08] Ubotu, please tell Languid about raid [03:08] apokryphos, Except it worked BEFORE I compiled in the latest git/cvs drm, Mesa, and xf86-driver-ati [03:08] I'm running on a gentoo install right now [03:08] pudland, you mean glxinfo? [03:08] Hyperion2010: If so, you can create your own custom LiveCD with a custom kernel. [03:08] that works [03:08] nameserver 192.168.101.101 [03:08] nameserver 192.168.101.102 [03:08] pudland: fglrxgears or something like that [03:08] !tell Hyperion2010 about install [03:08] I'm connected through ehternet to a modem [03:08] that's connected through cable to the www [03:09] Hyperion2010: believe theres a howto on that page for just what you're doing [03:09] ok, great, thanks [03:09] xchat update the channel list when I enter in a server, what I can do to stop it???? === jdmulloy [n=jdmulloy@pool-68-160-169-83.bos.east.verizon.net] has left #ubuntu ["Konversation] [03:09] fido-dido: its something close, cant remember though [03:09] apokryphos, Except the logs say "Direct Rendering enabled"! [03:09] javaJake: sounds like a bug in those latest things then [03:09] inglor: 192.168.101.101 is possibly the address of your modem [03:10] pudland: use the tab completion [03:10] that would be my guess, so basically there is nothing I can do? [03:10] Hyperion2010: Ubuntu can be installed in lots of ways. Please see https://help.ubuntu.com/community/Installation for documentation. Problems during install? See https://wiki.ubuntu.com/CommonProblemsInstall and https://wiki.ubuntu.com/DapperReleaseNotes/UbiquityKnownIssues ( comment stolen from Ubotu ) [03:10] fido-dido: ????? [03:10] fgl_glxgears [03:10] fido-dido: ahhhhh [03:10] inglor: fix your modem's built-in DNS proxy, if it's broken, or set your DNS manually to something else - like the DNS servers from your ISP (which you should find somewhere in your ISP's site) [03:10] apokryphos, Maybe... but I'd rather narrow it down first. === tw|sT3d [i=rave@203.167.67.157] has left #ubuntu [] [03:11] inglor: 212.245.255.2 is a DNS server that should work, though very slowly [03:11] fido-dido: perfect!!! thanks [03:11] pudland: glxinfo | grep direct === merriam [n=merriam@84-12-170-70.dyn.gotadsl.co.uk] has joined #ubuntu [03:11] lemme see if the welcome cable page works, it's supposed to work even if I'm not connected === M0E-lnx [n=rc2@adsl-70-240-117-200.dsl.hstntx.swbell.net] has joined #ubuntu === tom_ is now known as pokemon [03:11] do you HAVE to use the 'raid-autodetect' filesystem for RAID to work in linux?? [03:11] pudland: If it says "direct rendering = yes" then they are installed correctly. === pokemon is now known as charizardrulz [03:11] ahh I see.. they removed it.. stupid gnome retards [03:11] does ubuntu install debian packages too? [03:11] fgl gives 350fps w/ pci 9200 === gabe_ [n=gabe@207-255-74-056-dhcp.aoo.pa.atlanticbb.net] has joined #ubuntu [03:12] the odd thing is that it worked just fine until about a minute ago === justina4 [n=eltech@ool-457c9421.dyn.optonline.net] has joined #ubuntu [03:12] M0E-lnx: it uses .debs, but installing debian packages on ubuntu can cause real problems [03:12] aahh. [03:12] anyone know where I could find an ubuntu package for rp-pppoe [03:12] I installed it, but can't get online to do anything [03:12] jordan_u: yes for direct.. thnks [03:12] without rp-pppoe [03:13] !pppoe [03:13] how do i shot web [03:13] Setting up an ADSL/PPPoE connection? Look at https://help.ubuntu.com/community/ADSLPPPoE [03:13] LjL, not working... so what do I do? [03:13] charizardrulz: what? [03:13] !pppoe | M0E-lnx [03:13] M0E-lnx: Setting up an ADSL/PPPoE connection? Look at https://help.ubuntu.com/community/ADSLPPPoE === La_PaRCa [n=La_PaRCa@bas12-montrealak-1167981457.dsl.bell.ca] has joined #ubuntu === RodrigoX is now known as Rastaman [03:13] thanks ubotu [03:14] M0E-lnx: ubotu is a bot [03:14] inglor: what is not working, the welcome page? anyway try putting 212.245.255.2 as your first nameserver in /etc/resolv.conf and see [03:14] in that case thanks variant [03:14] ok, I'll try [03:14] M0E-lnx: yw :) === Tonren [n=mcantor@dh113108.bennington.edu] has joined #ubuntu === mrmoke [n=mrmoke@gein.vistech.net] has joined #ubuntu [03:15] How do I change my screen depth from 32 to 24 in xorg.conf? === _`casey [n=casey@71-214-131-94.roch.qwest.net] has joined #ubuntu [03:15] LjL, done, now do I try to ping? [03:15] powercat, 32 is the same as 24. 32 is just 24 with 8 bits of alpha channel === mnepton [i=mneptok@conference/ubuntuconf/x-abce44a675070b6f] has joined #ubuntu === ailean [n=ailean@82-40-205-105.stb.ubr07.uddi.blueyonder.co.uk] has joined #ubuntu [03:16] LjL, it works, hmmm === Rastaman is now known as Capoeirista [03:16] I guess I'll call my ISP later [03:16] powercat: Depth and DefaultDepth === morphir [n=morphir@217.168.81.2] has joined #ubuntu [03:17] eobanb: But when I try to use beryl, I get this error in the console: beryl: No GLXFBConfig for depth 32 [03:17] eobanb: And I don't see any borders to my windows === sproingie [n=chuck@64-121-2-59.c3-0.sfrn-ubr8.sfrn.ca.cable.rcn.com] has left #ubuntu ["Ex-Chat"] === Groovebot [n=guv@adsl-157-114-191.clt.bellsouth.net] has left #ubuntu ["Konversation] === Capoeirista is now known as rxdx === Twinxor_ [n=jme@c-24-7-89-173.hsd1.ca.comcast.net] has joined #ubuntu [03:18] powercat, please move this talk to #beryl [03:19] inglor: No. I hate you! === Sonic|Laptop [n=garrett@unaffiliated/sonicvanajr] has joined #ubuntu === ichyto [n=Stu@c211-28-48-117.frank1.vic.optusnet.com.au] has joined #ubuntu === Cranky-E17 [n=Elive_us@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu [03:20] charming [03:20] <_`casey> any stabs on powercat's age? [03:20] powercat, you know, I would have told you how, someone just told me when I had the same issue... [03:20] physical or emotional? [03:20] <_`casey> lol [03:20] mnepton: lol === justin420 [n=Justin@69.92.132.245] has joined #ubuntu [03:20] I just hate it when people are just rude to people who WANT to help them [03:20] *sigh* === dope [n=dope@70-20.202-68.tampabay.res.rr.com] has joined #ubuntu [03:21] how do i create a shortcut to a folder on my desktop === zliners [n=slkdjfs@d54C1D09C.access.telenet.be] has joined #ubuntu [03:21] hi all [03:21] someone awake ? [03:21] inglor: care for a nice, cold Coca-Cola, loser? ;) [03:21] <_`casey> hello zliners [03:21] all of us :P [03:21] nice === LGKeiz [i=LGKeiz@ppp-70-225-184-5.dsl.chmpil.ameritech.net] has joined #ubuntu [03:21] i could use a little help about compiling with jave [03:21] *java sory [03:21] folder shutcut anyone? [03:21] shortcut to a folder === rxdx is now known as Drop [03:21] zliners: what Java compiler are you using? [03:21] that i have on my desktop [03:22] inglor I'm really stuck here -- I've tried futzing with the BIOs a bunch to no avail -- sometimes it sees the ethernet interface, sometimes it doesn't, iit never sees the WiFi though [03:22] mnepton, I don't drink coca cola, I could however use a beer [03:22] fisrt of all i am a huge noob :D [03:22] <_`casey> beer is fantastic. [03:22] doctorow, I honestly don't know how to help you, I'm guessing it is an hardware error [03:22] i know a little about terminal and a bit of the desktop === eltech [n=eltech--@ool-457c9421.dyn.optonline.net] has joined #ubuntu [03:22] *problem [03:22] inglor I'm really stuck here. I've futzed with the BIOS a bunch. Sometimes I boot and it sees the Ethernet, sometimes it doesn't. It never sees the WiFi [03:22] inglor: if you have like 17,000 beers, the memory of powercat may be rm'ed *shrug* === jws [n=chatzill@ppp-69-223-39-130.dsl.dytnoh.ameritech.net] has joined #ubuntu [03:22] i inted to learn with experimentation === HLM [n=geek@S0106006067664bde.no.shawcable.net] has joined #ubuntu [03:22] inglor Thanks [03:22] zliners, google a bash guide, it's pretty simple [03:23] zliners: cd into the directory the source files are in, then run: javac filename === Bassetts [n=Bassetts@cpc2-mapp1-0-0-cust630.nott.cable.ntl.com] has joined #ubuntu === hellsfinger [n=hellsfin@p508DFF1C.dip.t-dialin.net] has joined #ubuntu [03:23] i thought man java would tell me more but it dous not contain compile [03:23] zliners: I am thinking of writing an interactive tutorial :) === Droit [i=Sombre@165.154.49.36] has joined #ubuntu [03:23] zliners, what do you wish to accomplish? [03:23] Jordan thnx [03:23] simple === youser [n=owner@67-58-196-205.amtelecom.net] has joined #ubuntu [03:23] learn bit linux [03:23] :D [03:23] mnepton Yup [03:23] oh right, javac is the java compiler :) [03:23] Bonsoir [03:23] zliners: man javac [03:24] mnepton Yup\ [03:24] maybe i would change to linux in a few months :D [03:24] zliners: you will need a jdk installed [03:24] zliners: man javac, a good command to remember is "apropos" it will give you the names of apps having to do with a given word :) === HLM [n=geek@S0106006067664bde.no.shawcable.net] has left #ubuntu [] [03:24] guys how do i navigate in terminal to folders with spaces inthe names/ [03:24] ? [03:24] zliners: not a jvm [03:24] zliners, why wait :)? [03:24] doctorow: are you actually in CA for Web2.0? [03:24] youser, backslash [03:24] mnepton Hi. Sorry -- I'm having a really shitty crisis right now [03:24] mnepton Nope -- I live in LA [03:24] i put backslask in place of spaces? [03:24] zliners: apropos or man -k does the same thing [03:24] youser: folder name = folder\ name [03:24] youser, for example "my documents" would become "my \documents"... [03:25] thNKS MAN [03:25] youser: no no.. like so-> cd sub\ directory [03:25] oops, my\ [03:25] doctorow: i know, i was hoping you were in the Bayarrhea. you could come to the UDS hotel and we could all help you. [03:25] doctorow: are you using Edgy with a MadWiFi supported card? [03:25] :d [03:25] mnepton Thanks for the thought [03:25] youser: use tab completion, it makes everything easier ;) [03:25] why i wait simple i am uber nppb @ linux :D [03:25] i tried it wouldnt work === Lahey [n=chatzill@CPE000d8846b4a2-CM000039050c63.cpe.net.cable.rogers.com] has joined #ubuntu [03:25] i love tab completion [03:25] mnepton I'm using the WiFi that came stock with the ThinkPad -- dunno whether it's MadWiFi [03:26] youser: remember it's case sensitive, but tab completion works, and will work on inserting slashes for spaces too [03:26] zliners, there isn't really that much to know about it [03:26] doctorow: probably the Intel 3945abg [03:26] :D [03:26] Jordan_U javac filename => dous thad also work fopr a dir ? === Shadowpillar [n=Shadow@ontario-ca-cuda3-70-36-185-20.ontrca.adelphia.net] has joined #ubuntu [03:26] zliners, unless you LIKE to mess with it, which is half the fun === Versed [n=Versed@c-69-253-173-154.hsd1.nj.comcast.net] has joined #ubuntu [03:27] doctorow: fire a phone number at kurt@ubuntu.com and i'll call you from the Googleplex and see if i can't help you get it sorted. [03:27] i am messing with it ;) [03:27] Can someone here help me? I just installed Ubuntu 6.10 and i can't find my files anymore [03:27] youser: folder name = folder\ name = "folder name" ( you can use quotes intead of escaping each space ) === pcgigabyte [n=pc@74.128.160.224] has joined #ubuntu [03:27] I have a puzzling installation problem. Once the X portion fires up, I see the screen resolution change, but the remains black. The keyboard goes dead- even capslock and numlock are unresponsive. Both mouse and keyboard are usb. Ideas? [03:27] Droit, which files? === hou5ton [n=hou5ton@coyote.tranquility.net] has joined #ubuntu [03:27] mnepton Thanks! Mail sent [03:27] I have lost the top panel in ubuntu. How can I reset the top panel and bottom panel back to default? [03:28] zliners: To compile everything in a given directory, cd into the directory and run: javac *.java === shmio [n=shmio@c-67-171-94-129.hsd1.pa.comcast.net] has joined #ubuntu [03:28] pcgigabyte: right click near the top, "add panel" then on the panel right click, "add to panel", etc [03:28] pcgigabyte: killall gnome-panel [03:29] jordan if I type that will it reset them all to default? === tekon [n=tekroos@220-253-60-254.VIC.netspace.net.au] has joined #ubuntu [03:29] inglor: All my files on my other hard drives. I'm back to using win XP because i can't find nothing on Ubuntu, it's like my hard drives don't exist anymore === fender [n=fender@mail.dropletsap.com] has joined #ubuntu [03:29] pcgigabyte: No, I thought you meant that it just didn't show up, not that you deleted it, sorry :( [03:29] Droit, what fileformat is your other hard drive using? [03:29] Lol I deleted it [03:29] is there a way to reset them back to default? === QcMECchMEC [n=mario1@modemcable174.134-81-70.mc.videotron.ca] has joined #ubuntu === eltech [n=eltech--@ool-457c9421.dyn.optonline.net] has joined #ubuntu [03:30] pcgigabyte: right click near the top, "add panel" then on the panel right click, "add to panel", then re-add all the stuff === noodles12 [n=ghost@CPE-65-28-12-187.kc.res.rr.com] has joined #ubuntu [03:30] damnit im trying to install propellerheads reason on linux [03:30] not easy [03:30] Jordan_U witch compiler do u suggest ? [03:30] flannel I just to reset them. Not add all stuff again. Is there a way to reset all of it? [03:30] inglor: NTFS [03:30] cause i cant fint javac in my apt [03:31] youser, under wine? [03:31] *find [03:31] iter, any suggestions? === exel [n=pi@adsl-241-74-60.msy.bellsouth.net] has joined #ubuntu [03:31] yep [03:31] pcgigabyte: no. Just re-add the stuff, its not too bad === izm99 [n=steve@S01060013461e8223.vn.shawcable.net] has joined #ubuntu [03:31] after first cd it said installed, then it said cant run cuz gui had problems [03:31] Droit, NTFS is very problematic with linux but it tends to work, reading the files should work but writing and modifying them tends to be problematic, I suggest using FAT32 to share data between windows and linux === worstenboy [n=worst@d54C3F30F.access.telenet.be] has joined #ubuntu === Cranky-E17 [n=Elive_us@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu === Drop is now known as Q[^_^] Q [03:32] zliners: I used plain old javac when I was taking java classes, but I prefer python now and I havn't really tried any other java compilers. === freeze [n=45_freez@71-87-167-171.dhcp.jcsn.tn.charter.com] has left #ubuntu [] [03:32] youser, the reason gui is very advanced [03:32] i know [03:32] inglor: Ok, sure, but i have a 120 gig hard drive formatted in NTFS and i can't re-format it without loosing all my files. [03:32] youser, it has bouncy cables and twisting windows... [03:32] but i had saw stories on ubuntuforums of it working [03:33] i installed flash9 beta and it isn't working, what steps should i take to fix it? [03:33] youser, cool [03:33] inglor: I can't read them if i can't even find them [03:33] hi zliners ;) === paran [n=paran@cl-56.sto-01.se.sixxs.net] has joined #ubuntu [03:33] hi wosr :d [03:33] i used to use reason on windows [03:33] Droit, can't you resize it? [03:33] zliners: If you are new to programming I highly reccommend python though :) [03:33] is possibly my graphics card not good enough to run on ubuntu? [03:33] <_`casey> NTFS-3G [03:33] <_`casey> Works like a charm for me. [03:33] youser, what is your card? [03:33] youser, doubtly, my 915 built in intel can run ubuntu smoothly with AIGLX and BERYL [03:33] no video card [03:33] i have built in 4mb graphics [03:34] lol [03:34] on my old emachines from 2001 [03:34] youser, i would say, NO chance [03:34] LjL, hi, i read that page about raid and that doesnt really help me. im using a hardware sata raid controller (a via vt6420), and already have xp installed on it. when i boot into the livecd, however, ubuntu recognizes it as two partitions, two separate hard drives. is there no way for it to recognize it as a raid properly? [03:34] cant run it? [03:34] youser, i would doubt it [03:34] youser: You can it without X. [03:34] youser, it can run ubuntu, but I doubt it can run x [03:34] errori got is "failed to open gui supportlibrary" [03:34] what is x? === Maledictus [n=Malebob@dslb-084-061-120-168.pools.arcor-ip.net] has left #ubuntu ["Connection] [03:35] inglor: If you are talking about re-partitionning, i don't know but i'd rather not take the chance of loosing everything. [03:35] youser, did you check the wineHQ? [03:35] nope [03:35] youser, x is the graphical bit [03:35] i saw X with kde on my k6-500 4mb shared memory.... it can [03:35] ahh wine graphics? [03:35] inglor: Isn't Ubuntu supposed to be able to "see" the files? [03:36] Droit: it can, assuming you've mounted the drives [03:36] !ntfs | Droit [03:36] Droit: To view your Windows/Mac partitions see https://help.ubuntu.com/community/AutomaticallyMountPartitions - See also !fuse [03:36] im using a hardware sata raid controller (a via vt6420), and already have xp installed on it. when i boot into the livecd, however, ubuntu recognizes it as two partitions, two separate hard drives. is there no way for it to recognize it as a raid properly? [03:36] Languid: i don't know honestly [03:36] video memory isnt problem on a 2d situation... [03:36] Languid: I saw someone else with the same problem [03:36] youser, it's not listed on www.winehq.com === reqage [n=reqage@74.141.69.254] has joined #ubuntu [03:36] iter, any idea what he did? [03:36] Languid: we weren't able to solve it [03:36] reason 3.0 is a 3d program === Cranky-E17 [n=Elive_us@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu [03:37] i think [03:37] Droit, did you try looking for them in /dev ? [03:37] Languid: he ended upusing sw raid via mdadm === capgadget [n=elifino@adsl-69-149-52-45.dsl.rcsntx.swbell.net] has joined #ubuntu [03:37] iter, hmm, okay. [03:37] youser you asked if you can ran ubuntu with that card [03:37] Languid: my guess is that "hardware raid" is acutally fakeraid [03:37] Languid: and so you gotta use sw raid in linux [03:37] Any one know why my Beryl is whiteing out ? [03:37] if you are going to play a game or develop a game for sure you should know what you need for it [03:38] no [03:38] Ubotu, please tell Mantice about beryl [03:38] i know i can run ubuntu with that card [03:38] Mantice: #ubuntu-xgl [03:38] since i urrently am [03:38] Flannel: Nope, what's that about mounting drives? they're plugged into the IDE. [03:38] !beryl [03:38] beryl is a window manager that takes advantage of an OpenGL accelerated X environment. See http://forum.beryl-project.org/ - Please see #ubuntu-xgl for help with beryl. [03:38] :) === blind [n=blind@c-71-234-180-125.hsd1.ct.comcast.net] has joined #ubuntu [03:38] youser: I would try installing from the alternate install cd without any of the GUI options , then install fluxbox. === NO [n=identd@skyberate.net] has joined #ubuntu [03:38] alternate install cd? [03:38] mantice, #beryl [03:38] i am running linux ubuntu dapper 6.06 [03:39] Is there a downloadable document for the Windows users switching to Ubuntu? [03:39] im trying to install a program under wine === hpnadig_ [n=hpnadig_@wikipedia/kn/HPNadig] has joined #ubuntu === Maverynthia [i=WinNT@105-122.202-68.tampabay.res.rr.com] has joined #ubuntu === i3d [n=i3dmaste@c-67-174-108-144.hsd1.co.comcast.net] has joined #ubuntu [03:40] Droit, not currently, but you could join the Ubuntu Documentation Team & help us finish one for the next release! [03:40] Droit, is it under /dev ? === jayHat [n=jay@ool-45777a22.dyn.optonline.net] has joined #ubuntu [03:41] inglor: It seems there are more people in #ubuntu-xgl than in #beryl ( currently none ) === fogos [n=marco@200.94.142.9] has joined #ubuntu [03:41] Hi all, new to Ubuntu and looking for help getting internet connection [03:41] inglor: ignore that last comment, user error :) [03:41] inglor: I don't think so. i'm pretty sure i looked nearly everywhere [03:41] iter, hmm.. even though i can get into a config screen after the bios to configure the controller? === sigger_ [n=Sigger@ool-44c0a897.dyn.optonline.net] has joined #ubuntu [03:42] Languid: yep [03:42] I just moved a hard drive from a PC with Damn Small Linux to one with Ubuntu. Does it matter that the users and groups have different uids and gids? (Sinking feeling in stomach says yes) [03:42] iter, so if it is fakeraid, what do i need to do? [03:42] Languid: the other guy had a nice, brand new x series server from ibm [03:42] Droit: ls /dev/hd* === pablo__ [n=pablo@200.115.243.111] has joined #ubuntu === mode/#ubuntu [+o apokryphos] by ChanServ === charizardrulz [n=tom@CPE0007e9d8a3a3-CM0014e82726e2.cpe.net.cable.rogers.com] has left #ubuntu [requested] === mode/#ubuntu [+b *!*@CPE0007e9d8a3a3-CM0014e82726e2.cpe.net.cable.rogers.com] by apokryphos === mode/#ubuntu [-o apokryphos] by apokryphos [03:42] Languid: you want to keep the data on your disks? [03:42] Madpilot: How can i help with documents? I don't know how Ubuntu works. I just barely know how win XP works. [03:42] Droit, tried in /dev/disk ? [03:42] ahh my mistake [03:43] its known to work on suse [03:43] iter, i would like to dual boot, so yes [03:43] and gentoo === mzli [n=ubuntu@221.196.90.183] has joined #ubuntu === jStefan [n=edgy@48sdl30m49.codetel.net.do] has joined #ubuntu === Jonbo [n=Jonbo123@adsl-074-229-245-180.sip.bhm.bellsouth.net] has joined #ubuntu [03:43] Languid: and I assume fs is ntfs on those disks? [03:43] Droit, make notes as you discover how it does work. That's how I got started on the docteam last year [03:43] iter, yup [03:43] sorry for the confusion [03:43] Can any one solve why mu azureus is gliching up it does not boot propley [03:43] Droit: what does that command give you? [03:43] Languid: sounds like you're going to need another hdd [03:43] inglor: i'm not sure, but i can't check right now coz i'm on win XP. Can't connect to the net with Ubuntu yet [03:43] by the way does anyone know how i can organize my xchat room list in order of 3 of ppl [03:44] Droit: ahh ok [03:44] # of ppl === aidanr [n=aidanr@83.147.134.5] has joined #ubuntu [03:44] Languid: I could be all wet, but I don't know a way to get that raid to boot ubuntu [03:44] iter, that sucks.... [03:44] :\ === tekon [n=tekroos@220-253-60-254.VIC.netspace.net.au] has left #ubuntu [] [03:44] Droit: if you happen to have another system you can connect with, then it will be a lot easier to troubleshoot things hehe === pablo__ [n=pablo@200.115.243.111] has left #ubuntu ["Abandonando"] === river [n=ubuntu@c211-30-65-244.belrs1.nsw.optusnet.com.au] has joined #ubuntu [03:45] iter, if i choose to just wipe the xp install, can i actually use the two disks in a raid setup with ubuntu? === Suspekt [n=ghost@c-69-255-54-65.hsd1.md.comcast.net] has joined #ubuntu [03:45] calamari: Ya, i know. The problem with internet support is that your internet has to work in order to get support. ;-) === Caplain [n=matt@20.detroit-04-05rs.mi.dial-access.att.net] has joined #ubuntu [03:45] can some one help me set up a RAID1 in ubuntu? [03:45] edgy has made my laptop retarded! Ever since a failed resume (battery died while in "suspend") my laptop can't seem to find the swap. what should i do? === BelialMkII [n=Dave@62.6.163.130] has joined #ubuntu [03:46] Droit: hehe yep.. so only the one computer then? === tekon [n=tekroos@220-253-60-254.VIC.netspace.net.au] has joined #ubuntu [03:46] can some one help me set up a RAID1 in edgy === five_laptop [n=fiveiron@74.137.132.103] has joined #ubuntu [03:47] Can any one solve why mu azureus is gliching up it does not boot ? === jayHat [n=jay@ool-45777a22.dyn.optonline.net] has left #ubuntu ["noodle"] [03:47] calamari: Yep, one computer, dial-up internet access and no matter how much i hate microsucks, Win XP is the easiest to setup. [03:47] I have booted from a live cd on a system which won't boot due to interrupted upgrade to edgy. I have mounted and chrooted to my original root, hower to complete the upgrade, I want to apt-cdrom add the edgy alternate but having trouble how to see it from my chrooted terminal. Can someone help ? [03:47] can some one help me set up a RAID1 in edgy [03:47] Droit: ahh, dialup. I can help you with that, I even wrote a guide on it at one point === lando [n=lando@adsl-10-71-233.mia.bellsouth.net] has joined #ubuntu [03:48] Droit: what modem do you have? [03:48] I have 2 cd drives one has the live cd and the other has the alternate. I see it on my livecd desktop but can't seem to find it on my chrooted terminal [03:48] calamari: Well, i think i'v found where i have to put the phone number, username and password, now i only have to find what they are. It's in a text file somewhere. === stack_push [n=stack_pu@peterson.dim.com] has joined #ubuntu === digi_ [n=digi@c-24-18-197-232.hsd1.wa.comcast.net] has joined #ubuntu === eggauah [n=daniel@201.72.63.61] has joined #ubuntu [03:49] calamari: USR [03:49] hey everone [03:49] is there a way to see with what ./configure options a certain package was compiled with ? [03:50] Is Edgy the latest ? [03:50] l [03:50] Can someone help me to list my devices and identify the second cd rom so that I can mlount it if need be in my chroot terminal [03:50] Because I think my beryl dont work because no one supports dapper O.o [03:50] can some one help me set up a RAID1 in edgy === Igor_V2 [n=igor@201.79.160.191] has joined #ubuntu === Cranky-E17 [n=Elive_us@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu === regfire [n=regfire@c-68-54-124-189.hsd1.in.comcast.net] has joined #ubuntu [03:52] Droit: sounds like you know what you need to do to get online then [03:52] !raid [03:52] Tips and tricks for RAID and LVM can be found on https://help.ubuntu.com/community/RaidConfigurationHowto and http://www.tldp.org/HOWTO/LVM-HOWTO === Xenguy [n=gnu@206-248-151-3.dsl.ncf.ca] has joined #ubuntu [03:52] Im going to update to Edgy every one here assumes you have it right ? [03:53] Droit: https://help.ubuntu.com/community/DialupModemHowto [03:53] Mantice, it's not a must, but upgrading is easy [03:53] Is it better ? [03:53] Im updating at the moment. === bwlang_ [n=bwlang@bb-66-55-211-238.gwi.net] has joined #ubuntu [03:54] calamari: I started using computers with a Commodore 64, so you could say i have had some experience. it's just linux that i'v never played around with. === asusathlon [n=mike@wnpgmb02dc1-155-71.dynamic.mts.net] has joined #ubuntu [03:54] well linux or unix === JanKok5 [n=JanKok5@71-208-6-226.hlrn.qwest.net] has joined #ubuntu === ubuntugrrrr [n=reid@cpe-024-211-126-208.sc.res.rr.com] has joined #ubuntu === lastnode [n=lastnode@unaffiliated/mahangu] has joined #ubuntu [03:54] Its to late to stop now, some one told me edgy was like paper cutting your eyes. [03:55] can some one help me set up a RAID1 in edgy? that link ubotu gave me is usless [03:55] i was wondering if anyone can help me i have lost the location of my wine c drive. anyone know where the default location would be? [03:55] Mantice: of course you read the docs, and visited the forums first :-) === wolki_ [n=wolki@client418.sg.fr.studentenwohnheim-bw.de] has joined #ubuntu [03:56] asusathlon: ~/.wine/drive_c or something === xtr-III [n=01897268@staff-nat.netnation.com] has joined #Ubuntu === Milchmann [n=david@DSL01.83.171.150.230.ip-pool.NEFkom.net] has joined #ubuntu [03:56] Xenguy: Yeah I read the first paragraph that said the latest stable release is edgy and heres the command to update, Thats what you ment right :) [03:57] Mantice: haha [03:57] Theres no X Button I cant close it O.o [03:57] !java plugin for firefox [03:57] Sorry, I don't know anything about java plugin for firefox - try searching on http://bots.ubuntulinux.nl/factoids.cgi [03:57] !firefox [03:57] firefox is the default web-browser on Ubuntu. To install the latest version, see https://help.ubuntu.com/community/FirefoxNewVersion Installing plugins: https://wiki.ubuntu.com/FirefoxPlugins [03:57] Hello, did you read about the new vulnerability in Firefox ? [03:57] I herd the wifi is broken but I dont use that so yay :) [03:58] Xenguy: I hope it fixes my azureus and my Beryl problem. === blind [n=blind@c-71-234-180-125.hsd1.ct.comcast.net] has joined #ubuntu === Toma- [n=lin4me@124-168-95-54.dyn.iinet.net.au] has joined #ubuntu === igor [n=igor@201.79.160.191] has joined #ubuntu === splintax [n=splintax@203-166-236-142.dyn.iinet.net.au] has joined #ubuntu [03:58] Mantice: good luck - I haven't bothered to try yet for some reason === Vaun [n=jws141@pool-151-204-24-71.pskn.east.verizon.net] has joined #ubuntu === dope [n=fuacer@70-20.202-68.tampabay.res.rr.com] has joined #ubuntu [03:59] if i ssh into my linux box now do i copy files from the linux box to my computer [03:59] how there is a ubuntu website that explains how to run Windows programs in Ubuntu...using Wine...anybody knows... [03:59] Xenguy: I saw a whole bunch of Beryl effects in Ubuntu and I thought that I could live with a couple of games in linux just for the eye candy. [03:59] dope: you would use scp [03:59] what's that === user-land3 is now known as user-land [04:00] dope it's ssh cp you would do scp user@host === nofxx [i=user@201-048-058-205.xd-dynamic.ctbcnetsuper.com.br] has left #ubuntu [] === charles__ [n=charles@222.124.224.99] has joined #ubuntu === Shadowpillar__ [n=Shadow@ontario-ca-cuda3-70-36-185-20.ontrca.adelphia.net] has joined #ubuntu [04:00] ah === bag83 [n=bag@dslb-088-073-117-122.pools.arcor-ip.net] has joined #ubuntu [04:00] if it's windows you would need to find a client for it [04:01] anybody know of a way to burn .img dvd images on ubuntu? === TheJF_ [n=redfox@mctnnbsa30w-156034049202.nb.aliant.net] has joined #ubuntu === darkbutterfly [n=darkbutt@ip68-230-166-108.mc.at.cox.net] has joined #ubuntu === TheJF_ [n=redfox@mctnnbsa30w-156034049202.nb.aliant.net] has left #ubuntu ["Ex-Chat"] [04:03] asusathlon: I have never heard of .img dvd images before what I normally see is .iso or .img for a floppy [04:03] how there is a ubuntu website that explains how to run Windows programs in Ubuntu...using Wine...anybody knows... [04:03] igor: do you mean where in the website? === moneyfirst [n=Googler@203.128.85.122] has joined #ubuntu [04:03] !wine | igor [04:03] igor: wine is a compatibility layer for running Windows programs on GNU/Linux. See https://help.ubuntu.com/community/Wine for more information. === whatthedeuce [n=j@S010600134606305f.gv.shawcable.net] has joined #ubuntu === RemyLaptop [n=honkey@203-206-174-94.perm.iinet.net.au] has joined #ubuntu [04:03] Oh your joking right.......... 7 hours to upgrade. === blind [n=blind@c-71-234-180-125.hsd1.ct.comcast.net] has joined #ubuntu [04:04] thanks === stinkydave [n=david@cpe-24-58-228-130.twcny.res.rr.com] has joined #ubuntu [04:04] my wine is screwed i cant locate where the drive_c is and it doesnt even correct with a removal reinstall of wine so i would like to try to find native app to burn these images or convert them to .iso [04:05] .img is roxio i think [04:05] asusathlon: drive_C for wine is usually ~/.drive_C [04:05] anyone know if there's a way to determine what compile flags were used for a particular package? === charles__ [n=charles@222.124.224.99] has joined #ubuntu === ec111 [n=eddie@75.80.63.94] has joined #ubuntu === Kannix [n=jens@xdsl-87-78-226-185.netcologne.de] has joined #ubuntu [04:05] what would the full path be? [04:06] sorry === QcMECchMEC [n=mario1@modemcable174.134-81-70.mc.videotron.ca] has joined #ubuntu === Versed [n=Versed@c-69-253-173-154.hsd1.nj.comcast.net] has joined #ubuntu [04:06] Could someone help me with installing the java plugin for firefox? i tried following some instructions but i dont have it in the list... [04:06] asusathlon: /home//.drive_c I believe [04:06] asusathlon: just type this in a terminal: cd [04:06] and yer there === zcat[1] [n=zcat@60-234-226-80.bitstream.orcon.net.nz] has joined #ubuntu === QcMECchMEC [n=mario1@modemcable174.134-81-70.mc.videotron.ca] has joined #ubuntu === charles__ [n=charles@222.124.224.99] has joined #ubuntu [04:07] nevermind i found the problem. [04:07] ok how the fuck do i use scp [04:07] i must have deleted it somehow? [04:07] !language | dope [04:07] dope: Please watch your language and keep this channel family friendly. [04:07] how do i use scp === Rodrigo [n=chatzill@200-171-224-32.customer.telesp.net.br] has joined #ubuntu [04:07] hj [04:07] !scp | dope [04:07] dope: scp is a secure way of copying files across networks using ssh. Usage: scp filename user@host:filename - winscp is a windows scp client [04:07] !scp | dope [04:08] i say scp pic.jpg me@localhost:pic.jpg [04:08] Hey. Would anyone care to help me get dialup set up on my laptop. I've opened up the Network settings program, and set up interface ppp0 with all of my information (phone number, username, password, etc). I wasn't sure about what my modem port was, so I stuck with the default (/dev/modem). Sadly, it's not working. I've never set up dialup on Ubuntu before, so I may have missed an obvious step. Could anyone help me out? [04:08] i'm using putty to ssh in [04:08] dope: scp file user@host:/path/to/destination [04:08] from windows [04:08] dope: pscp ? [04:08] ? [04:08] dope: dos or cygwin [04:08] ? === Pelo [n=jean@mtl-pppoe-adsl629.securenet.net] has joined #ubuntu === specialbuddy [n=matt@24-236-212-154.dhcp.aldl.mi.charter.com] has joined #ubuntu [04:08] putty [04:08] whatthedeuce: try /dev/ttyS0 [04:08] putty.exe [04:09] dope: you need pscp.exe [04:09] maybe i'll just get cygwin === cryptonic [n=cryptoni@193.203.136.175] has joined #ubuntu === QcMECchMEC [n=mario1@modemcable174.134-81-70.mc.videotron.ca] has joined #ubuntu [04:09] gnome-xgl [04:09] ok kewl thx [04:09] dope: both are good === QcMECchMEC [n=mario1@modemcable174.134-81-70.mc.videotron.ca] has left #ubuntu ["Quitte"] [04:09] dope: you don't directly connect to the machine though ssh you do it outside of a connection really === Zarephath [n=zarephat@cpe-72-181-22-100.houston.res.rr.com] has joined #ubuntu [04:09] i'll probably just put ubuntu on here anyway [04:09] grrrr [04:09] :( [04:09] dope: best :-) [04:09] heh === moneyfirst [n=Googler@203.128.85.122] has joined #ubuntu === QcMECchMEC [n=mario1@modemcable174.134-81-70.mc.videotron.ca] has joined #ubuntu [04:10] Ok a problem..for some reason alternat cd PPC didn't get my sound setup correctly...anyone here know what modules to load for PowerPC? [04:10] kitche: Still nothing (unless I have to do something to get it to reconnect). Is there any way of seeing if the connection worked? It's not giving me any errors, it just can't find any web pages, so for all I know, I could have put in some incorrect information === lwizardl [n=james@69.51.143.172] has joined #ubuntu [04:11] hi === redzkull [n=redzkull@tdev248-193.codetel.net.do] has joined #ubuntu === fowlduck [n=nate@68-190-90-101.dhcp.mdsn.wi.charter.com] has joined #ubuntu [04:11] Zarephath, alsa-mixer maybe ? [04:11] !modem | whatthedeuce [04:11] Xenguy looks like i may have to reformat to get this to work? [04:11] whatthedeuce: You want to connect via dial-up? Read https://wiki.ubuntu.com/DialupModemHowto [04:11] Pelo: Says no volume control? === Remy [n=honkey@144.131.139.202] has joined #ubuntu [04:11] might help you whatthedeuce if you haven't tried that already === merriam [n=merriam@84-12-164-148.dyn.gotadsl.co.uk] has joined #ubuntu === jstew [n=mis3@ppp-69-221-238-55.dsl.klmzmi.ameritech.net] has joined #ubuntu === k1n6k0d3 [n=xphaqtor@69.150.2.232] has joined #ubuntu [04:12] I just reinstalled ubuntu went from 6.06 to 6.10 and the logon screen resolution is off but the screen resoultion after login is correct (1024x768) how do i edit it for logon [04:12] Zarephath, I think your best bet is to look up your model number in the forum, chances are you might find instructions from someone else who had the same problem [04:12] Can anyone tell me why my temp dir is being cleared out every time I reboot? [04:12] Help! IBM Netvista M42 desktop. Dapper. 6.06.1 was fine, with updates the system clock is horribly broken, system bell malfunctions, and keyboard input doesn't work right. Any ideas? [04:12] I dont particularly care for that behavior [04:13] Pelo: I have up to prior to installing edgy never had an issue with sound... [04:13] jstew: That is the point of the tmp dir [04:13] Because its a temp dir [04:13] ptth. [04:13] As in temporary === QcMECchMEC [n=mario1@modemcable174.134-81-70.mc.videotron.ca] has joined #ubuntu === blind [n=blind@c-71-234-180-125.hsd1.ct.comcast.net] has joined #ubuntu [04:13] hmmm .. what port is a web site ? [04:13] I dont want it cleared unless I write a script to clear it [04:13] jstew: it's in the initscripts if you don't want it to do that [04:13] Zarephath, edgy was disapointing for several ppl [04:13] 22? [04:13] ty kitche === FogleBird [n=fogleman@c-24-2-245-46.hsd1.ct.comcast.net] has joined #ubuntu [04:13] hou5ton: Usually 80 [04:13] hou5ton: 80 === reZo [n=reZo@124.197.16.240] has joined #ubuntu === chris_ [n=chris@S01060016b649355d.ed.shawcable.net] has joined #ubuntu === lamer0__ [n=lamer0@cpe-76-168-243-89.socal.res.rr.com] has joined #ubuntu [04:13] hou5ton, 70 I think === scand [n=hh@201.20.216.85.user.ajato.com.br] has joined #ubuntu === PsiKloPx [n=steve@70.242.231.238] has joined #ubuntu === Pelo shuts up now [04:13] jstew: I just don't know which one does it for ubuntu [04:14] I have 2 cd drives on my machine and I need to identify them so that I can mount the second one, can someone help ? === scand [n=hh@201.20.216.85.user.ajato.com.br] has left #ubuntu ["cya"] [04:14] I'll figure it out. === QcMECchMEC [n=mario1@modemcable174.134-81-70.mc.videotron.ca] has joined #ubuntu === tiger1020x [n=tiger102@207-224-16-107.ptld.qwest.net] has joined #ubuntu === ubuntugrrrr [n=reid@cpe-024-211-126-208.sc.res.rr.com] has left #ubuntu [] [04:14] river, they didn'T mount automaticaly ? [04:14] Pelo: Yeah I had to download the Alternate CD just to get it installed...it booted to livecd..however the video was completely hosed and I couldn't see crap to get the installer started as I couldn't read what it was asking :-( [04:14] river: ls /dev | grep cd [04:15] kitche: I'm trying to get dialup working so I can install the things necessary to get wireless working. It doesn't look like dialup will work without downloading anything, so I may as well just download the wireless things onto a USB and install them. How would I put packages in apt onto a USB (would apt-get source work?)? === JohnP789 [n=johnp@68-188-42-215.dhcp.stls.mo.charter.com] has joined #ubuntu === zspada15 [n=kvirc@pool-71-116-23-204.eriepa.dsl-w.verizon.net] has joined #ubuntu [04:16] Pelo, Jordan_U, I'm want to 'apt-cdrom add' from a chroot session...so I can mount an edgy alternate without ejecting the livecd === Vicente [n=egg@c-67-165-235-123.hsd1.co.comcast.net] has joined #ubuntu [04:16] its quiet.... === RemyLaptop [n=honkey@144.131.139.202] has joined #ubuntu [04:16] perhaps too quiet [04:16] too quiete.... [04:16] whatthedeuce: what chipset is your wireless card? [04:16] Pelo: Well aint' that somethin' did a modprobe snd_powermac and lo and behold I have sound at least as far as the audio tests went.. [04:16] noob question: is it recommended to add sources using synaptic or just adding it to /etc/apt/sources.list? or does it matter? [04:17] Zarephath, congrats [04:17] noodles12: Which ever you prefer, it doesn't matter. [04:17] noodles12, if you're a noob use synaptic [04:17] noodles12: doesn't matter really just depends on what you use really === pepoX [n=pepo@200.90.101.201] has joined #UBUNTU [04:17] ati-installer.sh: 176: Syntax error: Bad substitution === mmc_ [n=mmc@124.6.175.102] has joined #ubuntu [04:17] Pelo: I don't remember however since I mod probed it, it will auto load at boot now? [04:17] problem trying to install ati driver [04:18] pepoX: why not install the package? [04:18] Zarephath, unfortunately I didn'T have any problem installing any hardware, so I can't help [04:18] pepoX: please use the ubuntu packages [04:18] name? === Shadowpillar [n=Shadow@dialup-4.233.127.195.Dial1.LosAngeles1.Level3.net] has joined #ubuntu [04:18] !ati [04:18] To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto [04:18] ok [04:18] hey all [04:18] how come mine just worked? [04:18] kitche: Airplus DWL-650+. I found this guide on getting it to work: http://stef.tvk.rwth-aachen.de/~nazgul/debian/DWL-650+_Howto.html === fuu__ [n=fuu@dslc-082-082-073-210.pools.arcor-ip.net] has joined #ubuntu [04:18] Did they do away with the developer channel? I don't see ubuntu+1 listed anymore.. === Q[^_^] Q is now known as RodrigoX === Bobrobyn [n=robyn@guestlaptop-12.cis.uoguelph.ca] has joined #ubuntu [04:19] Zarephath: it's secret right now [04:19] is there a jack room on freenode? [04:19] Ahhh... === Bobrobyn [n=robyn@guestlaptop-12.cis.uoguelph.ca] has left #ubuntu ["Leaving"] [04:19] Zarephath: #ubuntu+1 is not the developer channel [04:19] Jordan_U, from my livecd terminal I get cdrom cdrw ptycd ttycd but from my chroot session I get tons of them [04:19] jack rules. [04:19] And #ubuntu+1 hasn't been reopened yet [04:19] just had to say that :) === Pelo wonders what jack is [04:19] Zarephath: anyways #ubuntu+1 is for the development version of ubuntu [04:20] tritium: Ummm it was the place to go to ask edgy questions prior to its official release...however I stand corrected... [04:20] does ubuntu come witl a c++ compiler? [04:20] no [04:20] WHAT?! [04:20] dope:gcc [04:20] whatthedeuce: and this card doesn't work in ubuntu by default? [04:20] dope: sudo apt-get gcc === lwizardl [n=james@69.51.143.172] has left #ubuntu ["Konversation] [04:20] ok thx [04:20] dope: you install build-essential [04:20] dope:but you need apt it. [04:20] It doesn't get detected during the install [04:20] not just gcc [04:20] dope: no, sudo apt-get install build essentials [04:20] kitche: After I modprobe a module will Ubuntu keep it and reload the next time a reboot occurs? [04:20] build-essential [04:20] ok thx [04:20] Zarephath: #ubuntu+1 is for each development release, not just edgy [04:20] dope: install build-essential (its on the cd/dvd if you dont want to install it from net. [04:21] tritium:I know lots compiler. gtk ..etc === jmworx [n=jmworx@theorix.CeNTIE.NET.au] has joined #ubuntu [04:21] #ubuntu+1 will be open aftter the UDS [04:21] mzli: build-essential doesn't install gtk [04:21] should be [04:21] jack is a modular sound system that can run in realtime and allows mixing of lots of channels, among other neat stuff. It's mainly for sound studio type apps [04:21] ok it's going [04:21] what does this install? [04:21] Zarephath: no unless you add it to the /etc/modules.d forgot the name of the file that the module has to be added to though [04:21] !jack [04:21] jack: Rip and encode CDs with one command. In component universe, is optional. Version 3.1.1+cvs20050801-11 (edgy), package size 125 kB, installed size 580 kB [04:22] kitche: Sorry, that comment was directed at you but I forgot the to put your name at the start. [04:22] mzli: anyways gtk isn't a compiler [04:22] dope: apt-cache depends build-essential will tell you [04:22] kitche: Thanks [04:22] i see g++ [04:22] kitche:ok, gtk is an env. [04:22] DISABLED_MODULES="fglrx" [04:22] need #? === Aven [n=asd@adsl-69-231-37-193.dsl.irvnca.pacbell.net] has joined #ubuntu [04:22] hello === Pelo ignores Aven [04:23] what program can I use to record a voice/ [04:23] Pelo: what? :( === campbch [n=campbch@198.111.39.45] has joined #ubuntu [04:23] whatthedeuce: hmm there is a way to get packages on a usb you have to download them then go to the /var/cache/packages directory and get the packages that you need there === Pelo is in a mood [04:23] hello. [04:23] Pelo: you're attractive [04:23] what program can I use to record microphone? [04:23] i'm trying to get CoD to run, on a graphics card that can handle it, and after 3 days of trying to get it to install i have done so, and found a wine version that can handle it [04:23] what program can I use to record my voice on the microphone? === RemyMe [n=honkey@144.131.139.202] has joined #ubuntu [04:24] I wanna hear myself sing [04:24] kitche: Would there be a better way to do this that I'm not thinking of? [04:24] Aven, look up recorder or recording in synaptic [04:24] mkay, thats pela [04:24] lol [04:24] ... [04:24] but now the game itself is telling me my graphics card (intel 915 family) is lacking in minimum features [04:24] pela in spanish is a bad word [04:24] i need to install intel's drivers [04:24] AHAHAHAHA [04:24] but i dont know how [04:24] at all [04:24] IM SO FUKIN FUNNY === mode/#ubuntu [+o tritium] by ChanServ === mode/#ubuntu [+b %*!*@adsl-69-231-37-193.dsl.irvnca.pacbell.net] by tritium === mode/#ubuntu [-o tritium] by tritium [04:24] and after 4500 lines of output [04:24] Aven: not really [04:25] make exited with Error 2 === aidanr [n=aidanr@83.147.134.5] has joined #ubuntu [04:25] which doesnt tell me anything === Pelo thinks he was right to ignore Aven to begin with [04:25] how can i fix this? [04:25] Aven: you want a really good program there is audacity [04:25] jack audio production [04:25] Jorden_U, the 'ls /dev | grep cd' on my chrooted session produces a long list, how do I know which are mounted and as what ? === rexbinary [n=rexbinar@unaffiliated/rexbinary] has joined #ubuntu [04:25] im trying to mak beats on reason [04:26] audacity is awsome [04:26] i just unloaded my gigs of amples === MiD [n=abc@host-84-223-81-236.cust-adsl.tiscali.it] has joined #ubuntu [04:26] no, audacity isnt awesome [04:26] hi ppl [04:26] its good for sequencing already made tracks [04:26] how can i get all universe/multiverse packages onto a dvd for upgrading a machine without a connection? === sigger [i=Sigger@pool-68-162-8-54.nwrk.east.verizon.net] has left #ubuntu [] [04:26] whatthedeuce: the way that I todl to get he packages is the best way I do not know much about that chipset myself === IBNx886 [n=IBNx886@pool-72-72-232-31.altnpa.east.verizon.net] has joined #ubuntu === techNiKal [n=techNiKa@60.50.251.195] has joined #ubuntu === the_tich [n=bradley@bas3-montreal02-1096688036.dsl.bell.ca] has joined #ubuntu === ablyss [n=ablyss@71.81.22.108] has joined #ubuntu [04:27] for the love of god! === rummy [n=jstrater@ip72-195-134-212.ri.ri.cox.net] has joined #ubuntu === orko [n=dean@lithium.blah.net.au] has joined #ubuntu [04:27] hi i heard it is possible to open and close ports directly from a file ? === M0E-lnx [n=moe@adsl-69-151-254-175.dsl.hstntx.swbell.net] has joined #ubuntu [04:27] is it possible in ubuntu linux [04:27] in a non-religious exasperated sense, of course === Shadowline [n=shadowli@ppp-69-221-227-159.dsl.klmzmi.ameritech.net] has joined #ubuntu [04:27] !firewall | techNiKal [04:27] techNiKal: Ubuntu, like any other linux distribution, has firewall capabilities built-in. The firewall is managed using the 'iptables' command (see https://help.ubuntu.com/community/IptablesHowTo), or GUI applications such as Firestarter (Gnome) or Guarddog (KDE). [04:28] hey, how do you start services like sshd, samba, etc in ubuntu? [04:28] !hosts [04:28] Sorry, I don't know anything about hosts - try searching on http://bots.ubuntulinux.nl/factoids.cgi [04:28] !host [04:28] host: utility for querying DNS servers. In component universe, is extra. Version 20000331-9 (edgy), package size 69 kB, installed size 168 kB [04:28] river: run mount with no arguments to see what is mounted where. [04:28] !jack [04:28] jack: Rip and encode CDs with one command. In component universe, is optional. Version 3.1.1+cvs20050801-11 (edgy), package size 125 kB, installed size 580 kB [04:28] M0E-lnx: they start on boot [04:28] jStefan no i am talking about ports opening through file [04:28] (or after being installed) === orko [n=dean@lithium.blah.net.au] has left #ubuntu [] === yock [n=myockey@pdpc/supporter/active/Yock] has joined #ubuntu [04:28] so you can't mannually stop one? [04:28] is there a way i can sort my xchat room list? [04:28] techNiKal, iptables saves to a file, read the wiki it might say something on it [04:28] M0E-lnx: sure you can. sudo invoke-rc.d start | stop | restart [04:29] techNiKal: umm do you mean the internet super daemon since that's what popped in my mind when you said it? === PsiKloPx [n=steve@ppp-70-242-231-238.dsl.lgvwtx.swbell.net] has joined #ubuntu === lun_ [i=lun@85.206.172.54] has joined #ubuntu [04:29] M0E-lnx, start stop sripts are located in /etc/init.d/ you just run them and the first parameter could be: start stop restart etc === newtoubuntu [n=Chatuser@cpe-76-186-181-174.tx.res.rr.com] has joined #ubuntu [04:29] is there anyone available who can help me build intel 915 graphics chipset drivers? [04:29] i do not understand them [04:29] youser, there is an option in the prefs to order the channels by alphabetical order or by opening order [04:29] kitche: If there are dependencies for the package that I don't know about, will it tell me? [04:30] but need to compile them and use them [04:30] campbch: they're already included by default for you [04:30] Can I get some help? === blind_ [n=blind@c-71-234-180-125.hsd1.ct.comcast.net] has joined #ubuntu [04:30] no one can help me? how can i get all universe/multiverse packages onto a dvd for upgrading a machine without a connection? [04:30] the game says they arent good [04:30] they need to be upgraded === JOI^_^ [n=JOI^_^@202.150.68.114] has joined #ubuntu [04:30] mmm. jStefan, so sudo /etc/init.d/sshd stop will stop the sshd server? [04:30] Ubuntu locks up before it ever starts. [04:30] so i need to use the newest version from the intel site [04:30] who has HandelGotD font maybe can send ir for over dcc? [04:30] campbch, I think intel cards just work off the default drivers [04:30] kitche i heard that a file is available in linux by which you can mention the name and the number of port such as ssh/22 you can change it to some other as well [04:30] *it [04:30] It hangs on the splash screen [04:30] no [04:30] M0E-lnx, yes, or what tritium said [04:30] whatthedeuce: well it should if you are downloading them using apt-get but it also says the dependencies on the website [04:30] i need it for a GAME (and screensavers dont work) that is telling me it is NOTworking === G-net|Gilnim [n=gilnim@unaffiliated/gilnim] has joined #ubuntu [04:31] techNiKal: think you are looking for inetd.conf but not sure === traskbtrojanek [n=traskbtr@c-75-72-133-63.hsd1.mn.comcast.net] has joined #ubuntu [04:31] i need the intel drivers from the website, the official linux drivers, something that MIGHT help === ervin [n=ervin@216.230.150.5] has joined #ubuntu [04:31] forgive me for being rash, but i am on day 3 of trying to get this game working [04:31] and now im stuck [04:31] trying to compile drivers from source [04:31] alguien que hable espaol...........necesito ayuda [04:31] !es [04:31] Para Espaol por favor usen #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendrn mas ayuda. [04:32] campbch, sorry but I can't help [04:32] noone can help :'( === RAE [n=ricekt@69.166.117.14] has joined #ubuntu [04:32] i dont understand [04:32] at all === strabes [n=strabes@wcnat-50-253.wheaton.edu] has joined #ubuntu [04:32] what its telling me [04:32] !enter > campbch [04:32] i have literally 4500 lines of soomething that could have gone wrong [04:33] campbch: if you're trying to compile source, have you installed build-essential? [04:33] yes === newtoubuntu [n=Chatuser@cpe-76-186-181-174.tx.res.rr.com] has joined #ubuntu === Kervan [n=Kervan@88.224.242.12] has joined #ubuntu [04:33] has anyone used the the .deb (+gdebi) to install flash9 beta? [04:33] Hello [04:33] whats the difference between iso and utf-8? [04:33] campbch, does ./compile finish ? [04:33] no [04:33] its different [04:33] the_tich, it's easier to just copy over the files === yello [n=yello@S010600131018ddda.cg.shawcable.net] has joined #ubuntu [04:34] i dont even understand [04:34] hey can anybody help me about slow dns request? [04:34] !flash9 [04:34] Flash player 9 beta has been released. You can download it here: http://seveas.imbrandon.com/dists/dapper-seveas/custom/ (replace dapper-seveas with edgy-seveas for edgy) - Official Adobe page at http://labs.adobe.com/downloads/flashplayer9.html [04:34] it wants me to [04:34] Am I being ignored? [04:34] Pelo: you want to typically run ./configure && make && sudo make install [04:34] newtoubuntu: no === pcgigabyte [n=pc@74.128.160.224] has joined #ubuntu [04:34] who has HandelGotD font maybe can send ir for me over dcc? [04:34] newtoubuntu: you didn't say anything you just said hello [04:34] zspada15, I'm not the one with the problem [04:34] Can someone give me some direction? [04:34] it says Make World === Caplain_ [n=matt@125.detroit-06-08rs.mi.dial-access.att.net] has joined #ubuntu [04:34] oh === lamer0__ [n=lamer0@69.46.27.117] has joined #ubuntu [04:34] ubuntu freezes at the splash screen [04:34] !make [04:34] Compiling software from source? Read the tips at https://help.ubuntu.com/community/CompilingSoftware (But remember to search for pre-built !packages first: not all !repositories are enabled by default!) [04:34] NO [04:34] It never runs. even in safe mode... [04:34] i already read that it doesnt apply [04:35] Could someone help me. I got gyache working in ubuntu with voice. But I the voice is all jarble any suggestions? [04:35] newtoubuntu, smp? [04:35] Anyone else having trouble with nvidia and xv tearing in edgy? I figured out how to fix it. [04:35] campbch, what do the last the or four lines of the compilation tell you [04:35] Pelo, you mean just unpack the compressed folder and drop the files somewhere? where would i drop them? [04:35] I've tried everything I know but I'm stuck [04:35] this source is different, there is no configure, there is nothing, autoconf does nothing im just supposed to do stuff [04:35] jstew Im all ears [04:35] It just freezes about 10 seconds after selecting run or install from the CD boot menu [04:35] newtoubuntu, did the CD burn ok? === La [n=edgar@200.79.193.187.cableonline.com.mx] has joined #ubuntu [04:35] campbch: what are you trying to do? [04:35] the_tich, there is just one file to copy replace, just search for it on your hdd and copy over the locations you find [04:35] The screen is a Graphical screen that says UBUNTU on it... === mister_roboto [n=jrk@24-136-10-99.hnc-bsr1.chi-hnc.il.cable.rcn.com] has joined #ubuntu [04:36] Yes it burned fine... === arodle [n=arodle@12-219-45-156.client.mchsi.com] has joined #ubuntu [04:36] I even checked the hash [04:36] newtoubuntu: let it load for 10 minutes and then if it doesnt load come back [04:36] I even ran the check cd from the boot menu [04:36] campbch: it doesn't have a ./configure but does it have a MakeFile.am or something close that that? [04:36] I've been letting it sit there for over an hour. === pepoX [n=pepo@200.90.101.201] has joined #ubuntu [04:36] newtoubuntu, platform? [04:36] the_tich, the package I got just had to files in it , a lib* and a txt file for install instructions [04:36] The caps lock is frozen [04:36] make[3] : *** No rule to make target `/X11R6/SourceForge/Mesa6.2/Mesa/include/GL/gl.h', needed by `gl.h'. Stop. [04:36] nope [04:36] kitche: Thanks for all the help. [04:36] I have an Intel 3.2Ghz Cpu... [04:37] it has makefile, xmakefile [04:37] for 3d i need Driver "ati" of Driver "fglrx" ? [04:37] magickal1: sudo nvidia-config --no-composite (assuming youre not using the composite ext) composite is enabled by default and has tearign problems. [04:37] It's an Abit IS7 Motherboard [04:37] campbch, look up gl.h in synaptic and if you find it , install it [04:37] campbch: your missing Mesa-dev files === noelferreira [n=noel@84.90.183.246] has joined #ubuntu === Volodya_ [n=Miranda@213.179.246.138] has joined #ubuntu [04:37] 1 GB DDR 400 Ram Dual Channel Mode === rexbron [n=rexbron@complex1-372-148.resnet.yorku.ca] has joined #ubuntu [04:37] newtoubuntu, is it the desktop CD or alternate CD ? [04:37] 300GB SATA Hard Drive [04:37] 200GB IDE [04:37] Volodya [04:37] another 300GB IDE [04:38] an 800GB RAID 0 [04:38] Pelo, oh so i can just follow the install instructions then... i don't have flash 7 (it is a fresh install) that shouldn't be a problem right? [04:38] as opposed to "my" missing Mesa-dev files [04:38] An ATI All in wonder 9800 pro [04:38] also when I disabled composite it had the side effect of brining the system load from 3.7 back down to .9 when watching TV with myth [04:38] newtoubuntu: thats confusing === La is now known as Garota [04:38] send me ubuntu christian edition [04:38] That's just what's in my sytstem [04:38] the_tich, you got me there, I would install flash 7 first === Skwid_ [n=Skwid___@bas1-montreal42-1242353834.dsl.bell.ca] has joined #ubuntu [04:38] Pelo, okay thanks. [04:38] hrm [04:38] google jesux Volodya_ [04:38] Volodya_: that's an independent project [04:38] the_tich: why not just install the package that Sveas made? [04:39] Is there a step by step boot process so I can see where it locks up? [04:39] you know how you can use vmware to run windows within linux [04:39] is there any way i could run a copy of windows from a local hard disk, within windows? === cari_sohib_ce [n=pc2@222.124.224.99] has joined #ubuntu === zspada15 [n=kvirc@unaffiliated/zspada15] has left #ubuntu ["So] [04:39] kitche, what file is this, where do i get it, and what are its benifits? === zspada15 [n=kvirc@unaffiliated/zspada15] has joined #ubuntu [04:39] splintax: yes and yes [04:39] whoops closed the wrong window [04:39] !flash9 | the_tich [04:39] the_tich: Flash player 9 beta has been released. You can download it here: http://seveas.imbrandon.com/dists/dapper-seveas/custom/ (replace dapper-seveas with edgy-seveas for edgy) - Official Adobe page at http://labs.adobe.com/downloads/flashplayer9.html [04:39] ubuntu ce - christian edition [04:39] Jordan_U, ok finally mounted /dev/hdd on /media/cdrom1 I now ant to add this via apt_cdrom add so that I can continue my interupted upgrade without ejecting the livecd from which I booted [04:40] kitche: how would i go about it? vmware? [04:40] Is there a way to step through the boot process to see where it freezes up? [04:40] thats interesting, I never knew there was a christian edition of ubuntu [04:40] splintax: yes need vmware [04:40] kitche, thanks. [04:40] newtoubuntu: yes, boot into single-user mode, and step through the init scripts [04:40] kitche: at the moment i'm dual booting - what i want to do is jump into my windows install without having to reboot [04:40] newtoubuntu, you could disable splash and quiet [04:41] !X11r6 [04:41] Sorry, I don't know anything about X11r6 - try searching on http://bots.ubuntulinux.nl/factoids.cgi [04:41] jstew: it's not from ubuntu though [04:41] newtoubuntu: they're all numbered [04:41] kitche: ok, thanks. i'll look into it. [04:41] I just want to diagnose the lockup at boot... === sigger [i=Sigger@pool-68-162-8-54.nwrk.east.verizon.net] has joined #ubuntu [04:41] yeah, I figured, but the webpage even stole the ubuntu look and feel lol [04:41] I need to step through the boot process [04:41] Jordan_U, never mind I think I've got it used 'sudo apt-cdrom -d /media/cdrom1 add' === Cas [n=cas@218.17.0.220] has joined #ubuntu [04:41] Is there a way? [04:41] are you the splintax from utorrent ? [04:41] newtoubuntu: see my comments to you above [04:42] newtoubuntu, edit the boot command (the menu will have an option for that) replace "quiet splash" for "single" [04:42] You sais they are all numbered [04:42] What does that mean? [04:42] Trying that.... [04:42] I've tried two edgy upgrades, each progressively more successfull than the last [04:43] but even in my last upgrade my system became very unstable and I had a sparatic touchpad === shredwheat [n=pete@cpe-76-168-41-58.socal.res.rr.com] has joined #ubuntu [04:43] kamui, that's good [04:43] ok, it didnt work again, with the mesa-dev package, and is returning the same error [04:43] kamui, i spoke too soon [04:43] thans for the /tmp clearing tip kitche, I was able to modify the rc script to keep the files I needed :) [04:43] ake[3] : *** No rule to make target `/X11R6/SourceForge/Mesa6.2/Mesa/include/GL/gl.h', needed by `gl.h'. Stop. [04:43] !tmp [04:43] Sorry, I don't know anything about tmp - try searching on http://bots.ubuntulinux.nl/factoids.cgi === Honk [n=Honk@cpe-24-209-211-93.cinci.res.rr.com] has joined #ubuntu [04:44] !temp [04:44] Sorry, I don't know anything about temp - try searching on http://bots.ubuntulinux.nl/factoids.cgi [04:44] jStefan: well, I wonder if I should just stop fuxkin with whats not broken (dapper is perfectly running on this laptop), or should I just download the Edgy live cd and try a fresh install from there [04:44] what kind of laptop would be good for linux === [SUDO] Tux [n=falco@66.241.90.107] has joined #ubuntu [04:44] I'm getting IDE: failed opcode unknown === pudland [n=adam@pool-71-126-69-71.phlapa.east.verizon.net] has joined #ubuntu [04:44] specialbuddy: got a Dell Latitude D820, it works very well [04:44] newtoubuntu: sounds to me like ur Raid is b0rked [04:45] kamui, i'm a bit lost, what exactly is failing? an upgraded system or the CD ? [04:45] cool === cari_sohib_ce [n=pc2@222.124.224.99] has joined #ubuntu [04:45] jStefan: the upgrade from dapper [04:45] RAID works fine.... [04:45] In XP that is... [04:45] kamui, ignore that last one, i'm not lost anymore [04:45] jStefan: Im doing a dist-upgrade each time [04:45] well, your going to have problems === [SUDO] Tux [n=falco@66.241.90.107] has joined #ubuntu [04:45] just added a bunch of passwd's. I notice that in shadow they're stored in cleartext. that's not right is it? [04:45] It does come up flagges as dirty all the time though.... [04:45] kamui, that's what i get for supporting 2 people at the same time :( [04:45] specialbuddy: it was free from work, I'd buy it if I had to, like it tons, nvidia vid works good, does beryl/xgl, also Intel wireless works well [04:45] dvd burner works [04:46] chkdsk does not find anything wrong with the RAID [04:46] kamui, updata-manager is preferred over dist-upgrade === [SUDO] Tux [n=falco@66.241.90.107] has left #ubuntu ["Leaving"] [04:46] update-manager* === harry [n=kvirc@68-235-112-223.kntnny.adelphia.net] has joined #ubuntu === shredwheat [n=pete@cpe-76-168-41-58.socal.res.rr.com] has left #ubuntu ["Leaving"] [04:47] Can a winmodem be used to fax as well? [04:47] How do I get 'apt-get dist-upgrade' to use the cd in /media/cdrom1 when it asks for a media change ? it keeps asking for '/cdrom/' instead [04:47] harry: depends some modems don't have that feature [04:47] river check your /etc/source.lst to make sure it's pointing at /media/cdrom1 [04:47] harry, you also need to give yourself permission to fax, in user under admin [04:47] river check your sources.list and see what it sayd (then do sudo apt-get update) [04:48] jStefan: a lot of people have stated that edgy has a ton of great new features and software and compatibility, and it seems to work well for them. For one, my network card bcm43xx works with the native driver in edgy, but in dapper I haev to use ndiswrapper. Another thing is that kubuntu supports all of my keyboard special keys on this laptop (not that I use kde, but it was nice to know that it worked. Edgy still won't suspend, but dapper d [04:48] oes hibernate. So its a tossup, I think I can make dapper do everything that edgy does, but manually, and It will take a lot of research. [04:48] says* === Volodya [n=Miranda@213.179.246.138] has joined #ubuntu [04:48] What version of the kernel has the ltmodem drivers built in or do I need to add the modules? [04:49] kitchie, jStefan, I did ' sudo apt-cdrom -d /media/cdrom1 add' is that not enough ? [04:49] [04:49] kamui: to clarify, edgy _does_ suspend, but evidently not on your hardware === hybrid_ [n=x@72.169.30.254] has joined #ubuntu [04:49] Dapper is more stable and seems to be less "rushed", at least in my experiences === mekkis [n=ti89rule@nasmartzone013.wireless.griffith.edu.au] has joined #ubuntu === h3htimo [n=brad@206.244.46.251] has joined #ubuntu [04:50] hey send me ubuntu christian editions [04:50] harry did you try installing a fax app from synaptic, I would the think the proper dependencies would get added to [04:50] But now that I have edgy working almost the way I want, it's all good. [04:50] jstew: Edgy is meant as the name says from what I have read [04:50] tritium: thats more or less what I meant, I can't get suspend to work on either dapper or edgy with my hardware, it just doesn't come back. But I can hibernate in dapper, but edgy doesn't hibernate for me, I reboot back into the os from scratch [04:50] / [04:50] Volodya, what's special about the christian edition ? [04:50] Volodya: I told you, that's an independent project. We can't send it to you. [04:50] Please stop asking [04:50] how can i get the gdesklets config gui to appear when i accidentaly removed the icon from the system tray?? [04:50] lol. seems to be a bad pun kitche buy it's true imho [04:50] s/buy/but/ [04:50] can I get ubuntu to ignore the RAID? [04:50] n [04:51] Do I need to add the drivers to the winmodem first before installing the fax app? [04:51] 13 cdv [04:51] kamui: do you have a sufficiently sized swap partition? === whaley [n=jtwhaley@cpe-071-068-048-109.carolina.res.rr.com] has joined #ubuntu [04:51] newtoubuntu, try temporarily removing un-needed drives, and see if it works [04:51] somebody please ban cari_sohib_ce [04:52] Like Disonnnect them> [04:52] yes nemish [04:52] newtoubuntu, yeah, that should at least help you isolate the problem [04:52] zspada15: for what? [04:52] s/nemish/newtoubuntu [04:52] hes trolling [04:52] or at least kick him [04:52] zspada15, why so harsh? [04:52] trolling, looks more like a malfunctioning bot to me [04:53] aye [04:53] I may just fubar this install and put it on another PC. I just wanted to dualk boot to it.... [04:53] It would have been cool... [04:53] But Linux still does not hev the hardware support that Windows does... [04:53] I am having a problem with Konversation, the Server List pops up when I open it, has no buttons, and will not close. [04:53] newtoubuntu: take that back [04:54] it has a fuck of a lot more [04:54] !language | zspada15 [04:54] zspada15: Please watch your language and keep this channel family friendly. [04:54] sorry, strong feeling [04:54] newtoubuntu: I find it to be the opposite.. Ive had better luck with linux installs than windows [04:54] === RodrigoX is now known as RodrigoX`durmind [04:54] zspada15: none of that please === RodrigoX`durmind is now known as RodrigoX`afk [04:54] sorry [04:54] Or it'll be /mode +q for you [04:55] tritium: 2 gig swap [04:55] ok im sorry wont happen again [04:55] mute would be more fair [04:55] thanks [04:55] jStefan: that's +q [04:55] ...but i meant it for the malfunctioning bot, not zspada15 [04:55] tritium: 1.250 gigs of real mem === wastrel [n=wastrel@nylug/member/wastrel] has joined #ubuntu [04:55] "Ubunto" [04:55] kamui: okay, good === Nchalada [i=Nchalada@d58-104-17-88.dsl.vic.optusnet.com.au] has joined #ubuntu [04:57] tritium: is there a log or other way to trace what hardware or drivers may be causing the suspend to crash? That way I think I could write a script to attempt to diable the drivers (modprobe -r them) before the suspend === ablyss [n=ablyss@71.81.22.108] has joined #ubuntu === inc-inc [n=ianyamey@CPE-138-130-71-167.nsw.bigpond.net.au] has joined #ubuntu === B_166-ER-X [n=ghost@c207.134.47-108.clta.globetrotter.net] has joined #ubuntu === Mau [n=mauricio@20150052030.user.veloxzone.com.br] has joined #ubuntu [04:57] kamui: put cat modprobe < log.text into your shutdown scripts? [04:57] kamui: if you have an idea of which they are, modprobe -r them prior to suspending === inc-inc [n=ianyamey@CPE-138-130-71-167.nsw.bigpond.net.au] has left #ubuntu [] === Mau [n=mauricio@20150052030.user.veloxzone.com.br] has left #ubuntu ["Leaving"] [04:58] kamui: if that works, there are settings in /etc/default/acpi-support that you can edit to modprobe -r modules before suspending === XiCillin [n=mike@dpc67142105197.direcpc.com] has joined #ubuntu === MikeyMike [n=mikeymik@ip70-179-218-46.dl.dl.cox.net] has joined #ubuntu === mepaYancho [n=yancho@195.158.87.23] has joined #ubuntu === campbch [n=campbch@198.111.39.45] has left #ubuntu ["Konversation] [04:58] how can i make nessusd start at startup? === zOrK [n=eclipse@c-66-176-68-228.hsd1.fl.comcast.net] has left #ubuntu ["Leaving"] [04:59] question here... and so help please : I just installed a new nvidia Geforce card on my pc, and I am desperately searching to find how to 'tell' ubuntu that there is a New (much newer) nvidia Card... I have 'reinstalled' the nvidia-glx drivers, but in the xorg.conf under 'device' its still the name of my old card .. === TheJF [n=redfox@mctnnbsa30w-156034049202.nb.aliant.net] has joined #ubuntu [04:59] tritium: the problem is that i have NO idea what might be causing it. Im pretty sure its not the graphics driver or the wifi, the crash happens when X is runnnig without acceleration using the standard ATI driver and with ndiswrapper blacklisted [04:59] and so.. : and some, sorry [04:59] XiCillin, system > prets > session [04:59] tritium: I just don't know how to track down where the resume halts [04:59] http://www.whatwouldjesusdownload.com/christianubuntu/2006/07/about-ubuntu-christian-edition.html http://www.whatwouldjesusdownload.com/linuxforchristians/blog.html === Crescendo [n=GWing@cpe-069-134-227-094.nc.res.rr.com] has joined #ubuntu [04:59] B_166-ER-X: sudo dpkg-reconfigure -phigh [05:00] B_166-ER-X: sudo dpkg-reconfigure -phigh xserver-xorg [05:00] okay [05:00] Pelo, yea but nessusd needs to be started as root [05:00] what is phigh? [05:00] tritium: Im not even sure how far back up the system gets, I don't have access to a second computer that I can attempt to ssh into the blank laptop with ATM. === arnducky [n=ordinary@S01060017ee009b87.cg.shawcable.net] has joined #ubuntu === paras [n=paras@12.206.0.168] has joined #ubuntu [05:00] zspada15: Only ask questions of high priority. === dragonfly7 [n=alexande@71-218-5-20.hlrn.qwest.net] has joined #ubuntu === zspada15 [n=kvirc@unaffiliated/zspada15] has left #ubuntu ["bye"] === PsiKloPx___ [n=steve@ppp-70-254-39-98.dsl.lgvwtx.swbell.net] has joined #ubuntu === sunyata [n=chris@c-24-19-26-184.hsd1.wa.comcast.net] has joined #ubuntu [05:00] Volodya: please don't advertise here === pcgigabyte [n=pc@74.128.160.224] has left #ubuntu [] === [SUDO] Tux [n=falco@66.241.90.107] has joined #ubuntu === [SUDO] Tux [n=falco@66.241.90.107] has left #ubuntu ["Leaving"] [05:01] tritium: could I try modprobe -r ing EVERYTHING and then putting it all back at resume? I don't know how unstable that would make the system if most all of the hardware modules were removed... [05:01] the device name in xorg.conf is just a label. [05:01] afaik [05:01] Is there a command to restart alsa? [05:01] kamui: doesn't sound like a reasonable approach. What makes you think it's a kernel module? [05:02] advertise-what is it?? i am russian... === rich_ [n=rich@pool-71-101-108-49.tampfl.dsl-w.verizon.net] has joined #ubuntu [05:02] Hey everyone, thanks for all the advise. [05:02] jStefan, ok my source.list says "deb cdrom:[Ubuntu 6.10 _Edgy Eft_ - Release i386 (20061025.1)] / edgy main restricted" can I just change that to "cdrom1:.." since I want to use /media/cdrom1 ? === smash__ [n=smash@p54B2D75A.dip.t-dialin.net] has joined #ubuntu [05:02] Volodya: a method to make other know your product. === harry [n=kvirc@68-235-112-223.kntnny.adelphia.net] has left #ubuntu ["So] [05:02] Volodya:or your service. [05:03] Jordan_U, now under device its 'Generic video card' :/ [05:03] river, you could remove that line, run sudo apt-get update, and then run apt-cdrom [05:03] send me ubuntu CE!!!!!!!!!!!!!!!!! [05:03] Generic is a dull name for a 7300Gs .. [05:03] Volodya: enough! [05:03] Volodya: UbuntuCE is not an official ubuntu distribution, please ask about it in #ubuntu-offtopic, or other more appropriate places === Pablo [n=Pablo@02.71.d1c4.cidr.airmail.net] has joined #ubuntu === splintax [n=splintax@203-166-236-142.dyn.iinet.net.au] has joined #ubuntu [05:03] B_166-ER-X: Somebody said earlier that the device name is just a label, if everything works, it works :) [05:04] hm === theBeno [n=email@CPE0016b668de1d-CM00111ae70f1a.cpe.net.cable.rogers.com] has joined #ubuntu [05:04] I need to "make install", what package do I need to install to do that? [05:04] feel free to go in and change it, just make sure you change it in both places. (backup the working copy first ) === dragonfly7 [n=alexande@71-218-5-20.hlrn.qwest.net] has left #ubuntu [] [05:04] theBeno: build-essential will get you a compiler, are you sure you need to compile something though? === rosinante [n=espen@217.196.49.213] has joined #ubuntu [05:05] Flannel, yes. [05:05] theBeno, you need to have build-essential package install [05:05] oooooohhh :-( === cevia1 [n=mat@cpe-72-229-172-65.nyc.res.rr.com] has joined #ubuntu [05:05] Flannel, I just could remember the name of the package. :P [05:05] jStefan, this is an upgrade that was interupted by a machine restart I am trying to recover while booted from a livecd...and would removing it get it to use the alternate edgy cd I have in /media/cdrom1 ? === zerdith_ [n=zerdith@71-10-25-60.dhcp.bycy.mi.charter.com] has joined #ubuntu [05:05] Thanks guys! === Vich [n=DrVich@ppp40-204.lns2.syd6.internode.on.net] has joined #ubuntu === zenwhen [n=zenwhen@74.131.98.27] has joined #ubuntu === Garota [n=edgar@200.79.193.187.cableonline.com.mx] has joined #ubuntu === Pablo [n=Pablo@02.71.d1c4.cidr.airmail.net] has joined #ubuntu [05:05] stop trolling Volodya, that's the 5th time you've asked [05:06] anybody know of boot options I can try to get a really old laptop to boot [05:06] river, apt-cdrom should add the CD correctly [05:06] Volodya, look it up on google [05:06] jstew:what's his problem? [05:06] it freezes when I try to boot it [05:06] river, if all else fails, try a symlink [05:06] err install it [05:06] B_166-ER-X: Since you have run that command though, you may want to restart x and make sure everything works ( if not there is a backup of your old xorg.conf ) [05:07] cevia1: how old? It might not be grunty enough to boot (<128M is the usual problem) [05:07] Pelo, there is a whole bunch of build-essential packages, which one? === chrisj [n=tortoise@209.79.152.253] has joined #ubuntu [05:07] mzli: I dont know if he does not understand internet customs, but he insists on someone sending him an unofficial ubuntu based distro. === DEDHED [n=DEDHED@pool-71-114-57-81.washdc.dsl-w.verizon.net] has joined #ubuntu [05:07] Hollo === mekkis [n=ti89rule@nasmartzone048.wireless.griffith.edu.au] has joined #ubuntu [05:07] I upgrade My Winderz Xp to Ubuntu Xp? [05:07] theBeno, the one that says just build-essentials, in synaptic [05:07] ok. good day for you! [05:07] its like 7 yrs === Shadowpillar [n=Shadow@dialup-4.233.127.195.Dial1.LosAngeles1.Level3.net] has joined #ubuntu [05:08] DEDHED: nah, we're all runing ubuntu vista already [05:08] it boots win95 [05:08] that's what I thought, and I added it usind the 'apt-cdrom -d /media/cdrom1 add' however, when I do 'apt-get dist-upgrade' it ask me for a media change looking at /media/cdrom instead which has my livecd I booted from [05:08] Pelo, ahh, Found it. There is no s on essentials. It's just build-essential. That's what threw me off, thanks. [05:08] my pocket calculator boots win95 :) [05:08] lol [05:08] lol [05:08] jstew: oh, maybe language problem. === sanmarcos [n=Marc@unaffiliated/sanmarcos] has left #ubuntu ["Cylons:] [05:08] i gotta check the ram I guess [05:08] jStefan, soory missed to include your handle above [05:08] the amount [05:09] otherwise perhaps look at xubuntu, or if it's really low-spec try something like feather linux... [05:09] river, maybe it requires removal of what existed before [05:10] jStefan, ok removing the deb cdrom: line [05:10] river: There is an upgrade script on the cd also, you may try that. === Kervan [n=Kervan@88.224.242.12] has joined #ubuntu === BluR [n=BluR@pool-141-157-171-206.bstnma.east.verizon.net] has joined #ubuntu [05:11] hello. when i do "sudo ifconfig eth0 down" and then "sudo ifconfig eth0 up" i can not resolve internet can any body help pls... [05:11] kitche, do you know if i should use the deb http://seveas or the deb -src http:// for flash9? === jtf0518 [n=jaytee@c-69-137-243-25.hsd1.in.comcast.net] has left #ubuntu [] === dredhammer [n=dredhamm@pool-71-247-78-90.nycmny.east.verizon.net] has joined #ubuntu [05:11] !flash9 | the_tich [05:11] the_tich: Flash player 9 beta has been released. You can download it here: http://seveas.imbrandon.com/dists/dapper-seveas/custom/ (replace dapper-seveas with edgy-seveas for edgy) - Official Adobe page at http://labs.adobe.com/downloads/flashplayer9.html [05:11] it has 80M ram [05:12] where can i download Ubuntu XP === quiet [n=josh@unixcorps/staff/quiet] has joined #ubuntu === PsiKloPx_____ [n=steve@adsl-75-23-32-11.dsl.lgvwtx.sbcglobal.net] has joined #ubuntu [05:13] who let the weirdos out tonight? [05:13] is Ubuntu Vista out yet [05:13] is flash 9 a whole lot differenty? === Buglouse [n=Buglouse@vulcan.flameshells.com] has left #Ubuntu [] === braino_ [n=braino@c-24-30-15-7.hsd1.ga.comcast.net] has joined #ubuntu === aeolis [n=serge@modemcable236.240-37-24.mc.videotron.ca] has joined #ubuntu [05:14] jstew, full moon? [05:14] jstew, well the democrats won the elections and Bush told us that would mean the end of the world [05:14] hollo? [05:14] zero742: Yes, it fixes sound issues and lets you play all the flash 8 content you couldn't before. [05:14] anyone there [05:14] neato [05:15] lol === Pelo tries to be nice to DEDHED just in case he's not just trolling [05:15] what was that cool [05:15] thanks for the link ubto [05:15] DEDHED: http://ubuntu.com/download [05:15] DEDHED, there is no such thing as ubuntu xp, you have ubuntu or you have windows xp [05:15] my computer is windows xp [05:16] so it need the xp version of ubuntu [05:16] !windows | DEDHED [05:16] DEDHED: For help with Microsoft Windows, please visit ##windows or your nearest mental health institute. See http://launchpad.net/distros/ubuntu/+bug/1 http://linux.oneandoneis2.org/LNW.htm and !equivalents [05:16] vista doesnt't work [05:16] DEDHED:remove it.haha [05:16] DEDHED: no, your operating system is Windows XP, Your computer is a 386 [05:16] DEDHED: download the 386 version of ubuntu, from that page [05:16] no my computer is a DELL [05:16] lol @ dedhed === stopher [n=business@cm-24-121-73-66.kingman.az.npgco.com] has joined #ubuntu [05:16] I can only hope your fckin around [05:16] DEDHED, dell in the maker, 386 is the type of cpu [05:16] who has HandelGotD font maybe can send ir for me over dcc? [05:17] Wow look! It's eracc === _Er1K_ [i=erik@re-url.com] has joined #ubuntu [05:17] no Pelo it say DELL on the front lol [05:17] DEDHED: the brand of your computer has nothing to do with that. [05:17] troll maybe [05:17] hahah === Pelo wonders where the ops are [05:17] i386 is computer's framework [05:17] this is great [05:17] is there a way to list the files and permissions of a dpkg? [05:17] do you want me to send you a picture [05:17] DEDHED: it says "Intel Inside" somewhere on it though, most likely [05:17] why i can not get back my ethernet after "sudo ifconfig eth0 donw -> up" [05:17] i thought intel was something in the government === bluetoad [n=ubuntu@b326E.static.pacific.net.au] has joined #ubuntu [05:17] yes dedhed get a pick of your dell [05:17] I want proff [05:17] proof [05:18] i386 is the language the little voices use to speak to your cpu [05:18] you dunt believe me zero742 [05:18] DEDHED: I suggest you do not use ubuntu now. it's too agony for you now. [05:18] lol [05:18] this is probably the best conversation I've ever seen [05:18] yes it is too agony for me now =( === mzli [n=ubuntu@221.196.90.183] has left #ubuntu [] === _Er1K_ [i=erik@re-url.com] has joined #ubuntu [05:19] I install build-essentials and I still can't seem to get ophcrack to compile. [05:19] theBeno: what error does it give you [05:19] theBeno, try apt-get builddep [05:19] theBeno, do you have all the dependencies installed ? [05:20] There was a problem with GTK === matrix [n=matrix@pu104500.student.Princeton.EDU] has joined #ubuntu === |thunder [n=e@c-68-60-143-198.hsd1.mi.comcast.net] has joined #ubuntu [05:21] theBeno, when you type ./configure , what are the last couple of lines you get ? [05:22] theBeno, actualy, you might find this usefull http://monkeyblog.org/ubuntu/installing/ [05:22] If I decide I am really lazy, is there a way to install the -dev packages corrosponding to all of the libraries I have installed? [05:22] Pelo, ***couldn't run GTK+ test program... === radioaktivstorm [n=charles2@BURTON-TEN.MIT.EDU] has joined #ubuntu [05:22] theBeno, ok , that's a new one to me [05:22] Jordan_U: not that i'm aware of but you can apt-get build-dep for whatever you're wanting to compile === bobbie__4 [n=Bobbie@S01060050046f293e.vc.shawcable.net] has joined #ubuntu === linuxguy999 [n=brooksb@h460d914c.area2.spcsdns.net] has joined #ubuntu [05:23] i updated ubuntu recently, but for some reason my swap didnt come with it. what do i do? === stopher [n=business@cm-24-121-73-66.kingman.az.npgco.com] has left #ubuntu [] [05:23] radioaktivstorm, how much ram do you have? [05:23] can any body help me pls i need sleep :( [05:23] 256MB [05:23] wastrel: I know, but not all programs are known by apt-get build-dep,it isn't important though. [05:24] Kervan, get sleep now come back fresh tomorrow [05:24] EAT CAFFEINE === reZo [n=reZo@124.197.45.143] has joined #ubuntu [05:24] thanks good idea but i cant sleep with a problem === santeria[FL] [n=infectio@ip24-170-193-114.ga.at.cox.net] has joined #ubuntu [05:24] Kervan: ifconfig doesn't call your dhcp client [05:24] jStefan, I have 256MB RAM [05:24] radioaktivstorm, you could see if you have any unpartitioned space left and create it there, otherwise you could resize a partition [05:24] try ifup instead Kervan [05:25] ok, but shouldnt i already have a partition for swap? === hybrid [n=x@easyubuntu/supporter/hybrid] has joined #ubuntu [05:26] Kervan: sudo ifup eth0 [05:26] i have a problem... i tried installing ubuntu 6.10 on my computer and when it started loading it shows random colored lines on teh screen, while the same cd, on my dads computer which is older than mine, it works perfectly. could it be because i have a 64bit processor compared to his 32 bit? === PapaLion [n=will@137.141.235.130] has joined #ubuntu [05:26] santeria[FL] : probably different video chipset [05:26] Pelo, do you know anything about rainbow tables? [05:26] santeria[FL] : Is it an ATI card? [05:26] hmm [05:26] theBeno, no I am sorry [05:26] nah i got an nvidia 6800gs [05:27] he is on an integrated graphics card from his celeron [05:27] Pelo, one other question... When I run ./configure, does it change any files outside of the folder that I extracted? [05:27] whats the name of the program to have your program windows go into tray icons when minimized? [05:27] santeria[FL] : Are they diagonal lines? ( I had a similar problem ) === kintaro0e [n=kintaro0@203.177.138.178] has joined #ubuntu [05:27] jStefan, I upgraded to the latest release of ubuntu recently so there was already a swap partition,,, but i dont know what to do to get it back [05:27] what was wierd is on the kubuntu installer when i tried that it didnt have the lines, but it went into some command prompt that had some stuff that i didnt understand [05:28] radioaktivstorm, you can check with "free" [05:28] oh theyre horizontal lines [05:28] theBeno, , ./configure only check to make sure you have all the dependencies to run the app, make creates the proper installation file and make install does the actual installation === techNiKal [n=techNiKa@60.51.125.112] has joined #ubuntu [05:29] santeria[FL] : And when you mive the mouse up or down there is a thin black line moving left and right? === wweasel [n=weasel@modemcable178.82-81-70.mc.videotron.ca] has joined #ubuntu === wweasel [n=weasel@modemcable178.82-81-70.mc.videotron.ca] has left #ubuntu ["Ex-Chat"] [05:29] hi i want to use azureus and it is saying open your 6889 udp port ? [05:29] how do i do that ? [05:29] i didnt try to move the mouse up and down [05:29] Pelo, ahhh, thanks. I kindof wondered what those always did. :P [05:29] should i try that? [05:29] techNiKal: are you running a firewall? [05:29] techNiKal, do you have a router ? open it in the router [05:29] no it is disabled on the router [05:30] Pelo it is disabled on the router [05:30] techNiKal: then you are all set if the firewall forwards that port to your client machine [05:30] should i try to hook my monitor into my integrated vga port instead of my graphics card port? [05:30] techNiKal, then you need to open it === tgelter [n=tgelter@c-67-166-112-170.hsd1.ut.comcast.net] has joined #ubuntu [05:30] hey guys, where do I modify my PATH? === braino__ [n=braino@c-24-30-15-7.hsd1.ga.comcast.net] has joined #ubuntu [05:30] Pelo how to open it ? [05:30] techNiKal, ubuntu does not block any ports by default (but i can) [05:30] techNiKal, and in the firewall if you have one , but I can'T help you with that [05:30] Pelo and where to open it ? [05:30] tech www.portforward.com [05:30] tgelter: in .bashrc if you use bash export PATH=$PATH:/something/new/here [05:30] jStefan, swap is 0 but if i look through the device manager...i get that i have 4 partitions: ext3, ntfs and two unlabeled ones (im dual booted with XP) === broyce [n=broyce@cpe-24-27-29-30.austin.res.rr.com] has joined #ubuntu [05:31] Pelo what is portforward.com ? [05:31] techNiKal, the linux equivalent of ipconfig is if config [05:31] Kingsqueak: I thought I looked through the .bashrc and didn't find anything, but I'll look again [05:31] santeria[FL] : If you are having the same problem as me you should be able to fix it by installing the nvidea drivers or using vesa. [05:31] techNiKal, that's a site that gives you info on how to open a port in your specific router === Mez [n=Mez@ubuntu/member/mez] has joined #ubuntu [05:31] radioaktivstorm, don't know what happened there [05:31] tgelter: may be .bash_profile [05:31] Pelo thanks i will try now [05:32] if i retry the kubuntu installer what should i do when it goes to that wierd command prompt thing? [05:32] .bash_profile is for login session .bashrc is non-login [05:32] hey guys, is there a lot of known issues with updating 6.06 to 6.10 through the internet updates? [05:32] techNiKal, if you need more help with that go and ask on #azureus-support [05:32] santeria[FL] : what command prompt thing? === Pelo doesn'T support az anymore , it's too messy === james124 [n=james@12.181.26.149] has joined #ubuntu === rc-1 [n=whyso@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu === hfhf [i=hfhf@dhcp-0-13-d3-a-e1-1a.cpe.mountaincable.net] has joined #ubuntu === viviersf [n=cain@196.44.1.98] has joined #ubuntu [05:32] santeria[FL] : sudo dpkg-reconfigure xserver-xorg -phigh and choose vesa [05:32] jStefan, ok, I removed the cdrom: line in sources.list, then did apt-get update, then 'apt-cdrom --cdrom /media/cdrom1 add' , this indeed added the liine back into source.list === julian_ [n=julian@adsl-67-126-239-81.dsl.frsn02.pacbell.net] has joined #ubuntu === james124 [n=james@12.181.26.149] has left #ubuntu ["Leaving"] [05:33] so type that when [05:33] i guess ill write that down cause i wont remember it lol [05:33] Wiseguy: believe Xubuntu has an issue with upgrading via update-manager, you'd have to check launchpad for others though [05:33] santeria[FL] : But first, did you try booting in safe graphics mode? [05:33] river, exactly the same line? or a fixed one ? [05:33] no i didnt try that i will though [05:33] PATH=~/bin:/usr/local/lib:"${PATH}" ... does that work? === Elive_user57 [n=Elive_us@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu === basanta [n=basanta@202.79.37.177] has joined #ubuntu [05:33] river, more importantly, is it working? === Pelo is gonna go to bed now [05:33] g'night folks [05:33] my bad, both .bashrc and .bash_profile are for login shells [05:34] jStefan, hmm...i dont know. Is there a way for me to gain access to the other partitions on my HDD through ubuntu? or do i need to run a live cd or something to tweak? [05:34] once i do that if i get into ubuntu can i install my nvidia drivers to ubuntu? [05:34] santeria[FL] : Yes. [05:34] does nvidia have linux drivers? === Elive_user57 [n=Elive_us@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu [05:34] jStefan, exactly the same, so how does it know which drive to use. === thor [n=diogenes@gulfal-host-cip525-01.gulftel.com] has joined #ubuntu [05:34] santeria[FL] : Yes, verry good ones in fact :) [05:34] santeria: yes [05:34] Pelo, thanks for the help/ [05:34] schweet === rBlong2us [n=eddie@pool-151-202-11-200.nycmny.east.verizon.net] has joined #ubuntu [05:34] radioaktivstorm, ubuntu needs to mount swap partitions maybe the entry is missing from fstab ? [05:34] !nvidia | santeria[FL] [05:34] santeria[FL] : To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto === idontknow [n=harshul@c58-107-78-152.blktn1.nsw.optusnet.com.au] has joined #ubuntu [05:35] ahh...got it...The global $PATH is defined in /etc/profile [05:35] river, dont know :( [05:35] Does anyone know how to make glx work with the G965 chipset? === knapp [n=knapp@67.58.93.134] has joined #ubuntu [05:35] hi all === root_ [n=root@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu [05:35] I do this and isn't working sudo dpkg-reconfigure xsever-xorg [05:35] what the heck === punkforpez [n=pez@66-190-246-118.dhcp.astr.or.charter.com] has joined #ubuntu === DEDHED [n=DEDHED@pool-71-114-57-81.washdc.dsl-w.verizon.net] has left #ubuntu [] [05:36] jStefan, now tried 'apt-get dist-upgrade' and it want me to put the edgy cd into '/cdrom' then press enter [05:36] sorryI forgot the r === theBeno [n=email@CPE0016b668de1d-CM00111ae70f1a.cpe.net.cable.rogers.com] has left #ubuntu [] === garrett__ [n=garrett@grnl-01-1204.dsl.iowatelecom.net] has joined #ubuntu [05:36] rBlong2us: In what way is it not working? [05:36] river, try symbolic links === Apollo [i=wallason@c-71-194-81-247.hsd1.il.comcast.net] has left #ubuntu [] [05:36] jStefan, how ? sorry I'm already at the edges of my noobness === aios [n=martin@modemcable228.191-200-24.mc.videotron.ca] has joined #ubuntu === Apoll1 [i=wallason@c-71-194-81-247.hsd1.il.comcast.net] has left #ubuntu [] === skypa [n=skypa@e178198195.adsl.alicedsl.de] has joined #ubuntu [05:37] Jordan_U: I just forgot to put r on server now it's fine [05:37] one more thing before i try this: how easy is irc to get for ubuntu ;) [05:37] does anyone know how to explain how to install wolfenstien ET onto ubuntu to a noob? [05:37] howeverr which one is better vesa, fbdev or vga? [05:37] river, man ln, you are looking for -s option === bimberi [n=dave@ubuntu/member/pdpc.active.bimberi] has joined #ubuntu === por [n=por@202.44.36.95] has joined #ubuntu [05:37] rBlong2us: What card do you have? [05:37] sis X driver jerks the LCD screen like hell [05:38] I hate this shit [05:38] jStefan, how would i figure out whether the entry exists or not?? [05:38] Jordan_U: a BS SIS === Shadowpillar [n=Shadow@dialup-4.233.127.195.Dial1.LosAngeles1.Level3.net] has joined #ubuntu === mister_roboto [n=jrk@24-136-10-99.hnc-bsr1.chi-hnc.il.cable.rcn.com] has joined #ubuntu [05:38] sis agp pro and jercks the screen maddly, I've been already a week trying to figure this shit out [05:39] Jordan_U, is downloading from the seveas site usually slow? === aios [n=martin@modemcable228.191-200-24.mc.videotron.ca] has left #ubuntu [".."] [05:39] rBlong2us: I remember you now :) === aiosx [n=martin@modemcable228.191-200-24.mc.videotron.ca] has joined #ubuntu [05:39] I've tried a thousand refreshes and so on' === aiosx [n=martin@modemcable228.191-200-24.mc.videotron.ca] has left #ubuntu [".."] [05:39] does anyone know how to explain how to install wolfenstien ET onto ubuntu to a noob? === Honk [n=Honk@cpe-24-209-211-93.cinci.res.rr.com] has joined #ubuntu === aios [n=martin@modemcable228.191-200-24.mc.videotron.ca] has joined #ubuntu [05:39] is fdev better than vesa? [05:39] radioaktivstorm, you will need to check if one of those partitions is in fact a swap, i dont know how to to that. IF so, it just needs to be mounted in fstab. === aios [n=martin@modemcable228.191-200-24.mc.videotron.ca] has joined #ubuntu [05:40] I will miss the dri based games though === Akuma_ [n=martin@modemcable228.191-200-24.mc.videotron.ca] has joined #ubuntu [05:40] hi anyone? [05:40] any suggestions? === _human_blip_ [n=mike@220.157.65.29] has joined #ubuntu [05:40] rBlong2us: Try each and see which does best, use: sudo dpkg-reconfigure xserver-xorg -phigh to speed up the process by only having it ask you what driver and resolution to use. === sunyata [n=chris@c-24-19-26-184.hsd1.wa.comcast.net] has joined #ubuntu [05:40] Jordan_U: thanks === traskbtrojanek [n=traskbtr@c-75-72-133-63.hsd1.mn.comcast.net] has joined #ubuntu === linlin [n=will@c-71-194-70-13.hsd1.il.comcast.net] has joined #ubuntu [05:41] rBlong2us: Have you filed a bug report? === nicolas_ [n=nicolas@modemcable030.209-130-66.mc.videotron.ca] has joined #ubuntu [05:41] is the sata2 ok with edgy ? === mister_roboto [n=jrk@24-136-10-99.hnc-bsr1.chi-hnc.il.cable.rcn.com] has joined #ubuntu === MasterOfDisaster [n=jaime@bas1-hamilton14-1167862821.dsl.bell.ca] has joined #ubuntu [05:42] jStefan, Thanks for the help! ill see if i can figure out how to determine which partition is what :d === niru [n=niru@203.129.255.178] has joined #ubuntu [05:42] radioaktivstorm, most likely swap, as what could have been there before? === victori_ [n=victori@cpe-76-168-243-89.socal.res.rr.com] has joined #ubuntu [05:42] Jordan_U: I think I should, you know what because all the new X driver for sis, from Gentoo, Ubuntu and PuppyOS make the lcd flicker like hell. I've got an old puppy LiveCD from summer with X working fine, so I am just suspecting something has gone wrong with a new X sis driver [05:43] can anybody let me know which all indian languages does ubuntu edgy support [05:43] !swap [05:43] swap is used to move unused programs and data out of main memory to make your system faster. It can also be used as extra memory if you don't have enough. See https://help.ubuntu.com/community/SwapFaq for more info [05:43] And also what architectures does ubuntu edgy supports === harusari [n=harusari@211.35.72.124] has joined #ubuntu === aro_ron [n=ubuntu@host-216-249-122-36.wireless.southern.edu] has joined #ubuntu [05:43] jStefan, well, i have the ntfs winXP partition....an ext3 partition, and two others [05:43] !swap > radioaktivstorm [05:43] that wiki might say something helpful [05:43] hey all [05:44] rBlong2us: File soon, while Feisty is still in the begginning stages and mabie a fix will be included by release. [05:44] I need some help installing edgy [05:44] I may have borked my password file. before I exited sudo -i I noticed that the passwd's were in cleartext. when I exited sudo -i, I couldn't sudo and now I can't log in. anyone? [05:44] niru what architecture are you curious about? [05:44] jStefan:could you please answer to my previous messages === tich_ [n=bradley@bas3-montreal02-1096683457.dsl.bell.ca] has joined #ubuntu [05:44] I had been running dapper since its release in june [05:44] I want to prepare a difference chart.so I need to know aout what all arch. does ubuntu edgy support [05:44] niru, don't know the answer [05:44] but managed to bork my upgrade to edgy, so I am tryingto instal from scratch [05:45] niru: i386, AMD64, PPC, SPARC... [05:45] but I cant get the installer to actually install === opensea [n=opensea@125.213.2.39] has joined #ubuntu [05:45] MasterOfDisaster, we still have SPARC ? [05:45] niru go to the ubuntu.com site === por [n=por@202.44.36.95] has joined #ubuntu [05:45] for server, yea [05:45] aro_ron: On what architecture [05:45] MasterOfDisaster:And which all indian languages [05:45] I tell it to put the mount point for root on the existing ext3 partition, but it refuses to mount and install === specialbrad [n=brad@bas3-kitchener06-1096648889.dsl.bell.ca] has joined #ubuntu === por [n=por@202.44.36.95] has left #ubuntu ["Ex-Chat"] [05:45] keeps saying there isno root file system. well duh, I havent installed it yet === ala [n=ala@blk-222-8-215.eastlink.ca] has joined #ubuntu [05:45] 6.06 anyways... [05:45] any ideas? === ThomBrown [n=thom@pool-71-125-199-3.nycmny.east.verizon.net] has joined #ubuntu [05:46] anyone know how to pipe a file into eclipse? [05:46] Akuma_: [05:46] jourdan_U its x86 === lcable [n=lcable@ip68-110-161-135.no.no.cox.net] has joined #ubuntu [05:46] ok re-starting === lcable [n=lcable@ip68-110-161-135.no.no.cox.net] has left #ubuntu ["Ex-Chat"] [05:46] Jordan_U: x86 arch [05:47] jStefan, this looks really promising... maybe ill just go with making a swap file and deal with the partition later.... [05:47] aro_ron: Did you reformat the partition first? ( the liveCD installer is picky ) [05:47] Anyone know how to deal with unresolvable dependances with Synaptic? [05:47] hello.. [05:47] radioaktivstorm, ok [05:47] Hello - I could use some help with postfix - anyone out there that can handle this === lcable [n=lcable@ip68-110-161-135.no.no.cox.net] has joined #ubuntu [05:47] specialbrad: What package? === lcable [n=lcable@ip68-110-161-135.no.no.cox.net] has left #ubuntu ["Ex-Chat"] [05:47] Jordan_U: not yet, think that will do it? cause the instaler has a reformat option, but it wont run it === lcable [n=lcable@ip68-110-161-135.no.no.cox.net] has joined #ubuntu [05:47] is there a tool that i can use in order to explicitly enable specific IP's for NAT? === mister_roboto [n=jrk@24-136-10-99.hnc-bsr1.chi-hnc.il.cable.rcn.com] has joined #ubuntu [05:48] dependancy issues are from too many repositories, usually [05:48] Jordan_U: libusb-dev [05:48] radioaktivstorm, check the troubleshooting section too [05:48] specialbrad: What error does it give when you try to reformat? [05:48] aro_ron: What error does it give when you try to reformat? [05:49] aro_ron: That last comment was for aro_ron, sorry. [05:49] Jordan_U: it simply says no root filesystem === Cholito [n=alejandr@87.218.67.122] has joined #ubuntu [05:49] jStefan, in my chroot terminal session, I unmounted /media/cdrom which was my /dev/hdc and instead mounted /dev/hdd in its place and the upgrade seems to be away === trappist [i=trappist@linuxkungfu.org] has joined #ubuntu [05:49] aro_ron: When in gparted? === Akuma_ [n=martin@modemcable228.191-200-24.mc.videotron.ca] has left #ubuntu [] === santeria[FL] [n=infectio@ip24-170-193-114.ga.at.cox.net] has joined #ubuntu [05:49] river, sounds good [05:50] Jordan_U: no, gparted seems to deal with it alright, its when I click next to set the mount points that it stops [05:50] MasterOfDisaster: Hrmf, I'll trying removing my non official ones and see if that works out [05:50] yea, disabling the 3rd party ones usually works [05:50] if I installed something with sudo python setup.py install , how do I remove it? [05:50] MasterOfDisaster: Worked, thanks a ton [05:50] Jordan_U: I am running it live right now, so I can try anything [05:50] jStefan, and Jordan_U thanks for your very patient assist over the last couple of days...with some luck, this will complete and fix the interupted upgrade and will be able to boot of the hdd once again [05:50] ok i tried ubuntu in safe graphics mode and it did the same vertical line thing, now kubuntu doesnt even take me to that command prompt thing it does the same as ubuntu [05:51] specialbrad: Also try: sudo apt-get -f install [05:51] tgelter: sudo python setup.py uninstall ?? [05:51] and i tried moving my mouse but i dont think thatll work anyway because i ahve a usb mouse === timbobsteve [n=timbobst@220-245-125-202-qld-pppoe.tpgi.com.au] has joined #ubuntu [05:51] bimberi: no go...thanks for trying though === Harnak [n=scott@60-234-167-113.bitstream.orcon.net.nz] has joined #ubuntu [05:51] hi all [05:51] HI! [05:51] im gettin frustrated === Jbirk [n=jbirk@adsl-63-199-245-30.dsl.sndg02.pacbell.net] has joined #ubuntu [05:52] is it safe to delete the mounted drive icons that ubuntu sets on the desktop when installing? [05:52] santeria[FL] : You can press ctrl+alt+F2 to get to an ungarbled terminal. === mister_roboto [n=jrk@24-136-10-99.hnc-bsr1.chi-hnc.il.cable.rcn.com] has joined #ubuntu [05:52] i is confoosed === Harnak is now known as irc === ala [n=ala@blk-222-8-215.eastlink.ca] has left #ubuntu ["Leaving"] [05:52] i just apt-get'd linux-image-2.6.17-10-powerpc .... but after a reboot `uname -r` still says I am using 2.6.15-26-powerpc.... any idea how to switch them over? [05:52] so when it shows the horizontal/some times verticle lines and color stuff, press control alt f2? === saki [n=saki@c-71-201-44-87.hsd1.il.comcast.net] has joined #ubuntu [05:53] santeria[FL] : Yes. === skelter [n=john@ool-4355b5dc.dyn.optonline.net] has joined #ubuntu [05:53] ok ill try... [05:53] Jordan_U: I still have all the leftover files from my borked dapper install, inclusing my GRUB instal for dual booting with XP. could any of that be affecting it? === Hit3k [n=allan@203.212.130.178] has joined #ubuntu [05:53] weird stuff: I can't hear anything (the computer I mean....) but I see amarok showing the analizer moving. I was watching a movie today so I KNOW the sound card works [05:53] anyone in or near Miami, FL ? === moose5435 [n=turkey@adsl-157-84-55.int.bellsouth.net] has joined #ubuntu [05:53] santeria[FL] : You may need to install the nvidia drivers from the terminal also, but ther is also a possibility neither of those things will work. === cedriczg [n=cedriczg@r200-125-21-119-dialup.adsl.anteldata.net.uy] has joined #ubuntu [05:54] I tried using headphones and speakers and nothing === rexbinary [n=rexbinar@unaffiliated/rexbinary] has joined #ubuntu [05:54] can anyone help with a kernel upgrade? [05:55] Cholito: same thing happened to me [05:55] i came in here to figure out how to fix it :s [05:55] skelter: really? [05:55] crap [05:55] aro_ron: If you still have files from dapper, did you not reformat or do you just have another partition? [05:55] dist-upgraded? [05:55] yes, but sound worked after the upgrade [05:55] stopped i think yesterday [05:55] uhmmmm [05:55] i didn't notice till i tried to run some music [05:56] same here LOL [05:56] Jordan_U: I havnt reformatted yet, as I was expecting the installer to do that. I have a NTFS and an EXT3 partition [05:56] do you have amaroth repositories? [05:56] Cholito: Did you watch any flash videos recently by any chance? [05:56] i don't believe so [05:56] Jordan_U: yeap :S [05:56] *sigh* === mister_roboto [n=jrk@24-136-10-99.hnc-bsr1.chi-hnc.il.cable.rcn.com] has joined #ubuntu === orangey [n=orangey@modemcable161.59-203-24.mc.videotron.ca] has joined #ubuntu [05:56] and i know i didn't see any flash, since i am on a 64bit proc...flash doesn't work [05:56] mysql [05:56] flash is so screwed up for linux... [05:57] yes I was trying to see the new Ikea catalog LOL [05:57] Cholito: Flash 7 screws up sound, restart then install flash9 instead === smoenux [n=smoenux@dsl-242-10-103.telkomadsl.co.za] has joined #ubuntu [05:57] restart FF? [05:57] !flash9 Cholito [05:57] Sorry, I don't know anything about flash9 Cholito - try searching on http://bots.ubuntulinux.nl/factoids.cgi === martiNez [n=narciso@203.111.234.75] has joined #ubuntu [05:57] how about for me...any way you could help me troubleshoot? === chrisj [n=tortoise@209.79.152.253] has joined #ubuntu === zero742 [n=bret@12-214-0-94.client.mchsi.com] has joined #ubuntu [05:58] Cholito: Your system, there is a command to just restart the sound but I can't find it again, restarting the computer will do it though. === faddatp [n=faddatp@69-162-197-122.bflony.adelphia.net] has joined #ubuntu [05:58] !flash9 | Cholito [05:58] Cholito: Flash player 9 beta has been released. You can download it here: http://seveas.imbrandon.com/dists/dapper-seveas/custom/ (replace dapper-seveas with edgy-seveas for edgy) - Official Adobe page at http://labs.adobe.com/downloads/flashplayer9.html [05:58] Jordan_U: just did it as I couldn't hear anything [05:58] Kingsqueak I fixed it === narciso [n=narciso@203.111.234.75] has joined #ubuntu [05:58] will try it dou ;) === cedriczg_ [n=cedriczg@r200-125-21-119-dialup.adsl.anteldata.net.uy] has joined #ubuntu === santeria[FL] [n=infectio@ip24-170-193-114.ga.at.cox.net] has joined #ubuntu === narciso is now known as manarang [05:59] how do I take desktop screenshots? [05:59] Cholito: And what applications have you run since then? ( anything that uses OSS instead of alsa can scew sound up ) [05:59] I mean a movie? === tony_ [n=tony@65-244-118-80.kaptech.net] has joined #ubuntu [05:59] I want to record a quick video of everything on my screen [06:00] ok the ctrl+alt+f2 took me to that command prompt thingy with the root or sodu or whatever but i dont know what to do to get it to actually go to ubuntu [06:00] crap, can't remember how did I installed the player === lawcox [n=alex@34.mue27.wrcs.bstma01r1.dsl.att.net] has joined #ubuntu === manarang [n=narciso@203.111.234.75] has left #ubuntu ["Leaving"] [06:00] Jbirk: http://www.google.com/search?q=linux+screen+capture+movie [06:00] !flash9 | Cholito [06:00] Cholito: Flash player 9 beta has been released. You can download it here: http://seveas.imbrandon.com/dists/dapper-seveas/custom/ (replace dapper-seveas with edgy-seveas for edgy) - Official Adobe page at http://labs.adobe.com/downloads/flashplayer9.html === idontknow [n=harshul@c58-107-78-152.blktn1.nsw.optusnet.com.au] has joined #ubuntu [06:00] Jordan_U: got it the first time [06:01] I meant I cant remember if I did it manually or via apt [06:01] so when it went to the lines thing i hit ctrl alt f2 and it took me to a command prompt looking thing and then i had no idea what to do so im back === tony_ [n=tony@65-244-118-80.kaptech.net] has joined #ubuntu [06:01] hello there === zero742 [n=bret@12-214-0-94.client.mchsi.com] has joined #ubuntu [06:02] anybody have any ideas? [06:02] santeria[FL] : Do you have another machine, or do you have to quit IRC to use the liveCD? === narciso [n=narciso@203.111.234.75] has joined #ubuntu === garr3tt [n=garrett@pool-71-245-122-250.cmdnnj.fios.verizon.net] has joined #ubuntu [06:02] i have to quit irc [06:02] postfix trouble shooting help need === irc is now known as Harnak === Harnak [n=scott@60-234-167-113.bitstream.orcon.net.nz] has left #ubuntu ["Leaving"] === bazin [n=bazin@golem.clnet.cz] has joined #ubuntu [06:03] skelter: any luck? [06:03] no, but i don't have much to go on at the moment [06:03] i can't do anything with flash [06:03] i mean it works perfectly on my dads computer but on mine when i tell it to start the livecd it does that colored lines thing and when i hit ctrl alt f2 it went to a command prompt looking thing where it had like root and something else [06:03] how do i edit files that require root privileges? [06:03] 64 bit proc === orville [n=orville@68-116-185-75.dhcp.oxfr.ma.charter.com] has joined #ubuntu [06:03] santeria[FL] : I can give you intructions on what commands to type to install the nvidea drivers if you are willing to try it / wait a bit. === bazin [n=bazin@golem.clnet.cz] has left #ubuntu ["Ukonuji"] [06:04] can someone help me with a Router problem? For some reason when I connect to it, it sometimes just doesn't do anything, or pages just does not load. (I know... it's not a very good description) === mbamford [n=Matt@d207-81-186-112.bchsia.telus.net] has joined #ubuntu === Vaske_Car [n=durad@d57-59-78.home.cgocable.net] has joined #ubuntu [06:04] idk could this have anything to do with me having a 64 bit processor? [06:04] radioaktivstorm: sudo nano === narciso [n=narciso@203.111.234.75] has joined #ubuntu === cedriczg [n=cedriczg@r200-125-21-119-dialup.adsl.anteldata.net.uy] has joined #ubuntu [06:04] j === martinez [n=narciso@203.111.234.75] has joined #ubuntu [06:04] sadasd [06:04] asd [06:04] sad [06:04] kh [06:04] skelter, thanks! === martinez [n=narciso@203.111.234.75] has joined #ubuntu [06:05] njjkdf [06:05] jdfssdad [06:05] santeria[FL] : Verry unlikely. [06:05] ds === narciso is now known as manarang [06:05] d [06:05] all i had to do on my dads comp is pop it in and say boot [06:05] dsa [06:05] das [06:05] ads [06:05] on mine its crazy === manarang is now known as awwwwwwww [06:05] sadsad [06:05] ds [06:05] byuerf [06:05] dgsdf [06:05] asd [06:05] and my machine is alot better than his [06:05] dsfsdfdf [06:05] sad [06:05] fff [06:05] asd [06:05] fff [06:05] asd [06:05] dsa [06:05] fff === mode/#ubuntu [+o Madpilot] by ChanServ === martinez [n=narciso@203.111.234.75] has left #ubuntu [requested] [06:05] sda === mode/#ubuntu [-o Madpilot] by ChanServ [06:05] !ops [06:05] Help! Keybuk, mdz, Amaranth, tritium, ajmitch, crimsun, ogra, CarlK, Seveas, Burgundavia, apokryphos, thoreauputic, nalioth, Madpilot, ompaul, rob, Hobbsee, imbrandon, DBO or gnomefreak! === mode/#ubuntu [+o Madpilot] by ChanServ === awwwwwwww [n=narciso@203.111.234.75] has left #ubuntu [requested] === mode/#ubuntu [-o Madpilot] by ChanServ === mode/#ubuntu [+o Madpilot] by ChanServ [06:05] Jordan_U: wel, seems like reformatting did the trick, installer is running fine now,thanks! === rexbinary [n=rexbinar@pool-72-64-72-34.dllstx.fios.verizon.net] has joined #ubuntu [06:06] he has a really old celeron and i have an amd 3500+ with nvidia 6800gs and 2gb ram === idontknow [n=harshul@c58-107-78-152.blktn1.nsw.optusnet.com.au] has joined #ubuntu === mode/#ubuntu [+b *!*@203.111.234.75] by Madpilot === aro_ron [n=ubuntu@host-216-249-122-36.wireless.southern.edu] has left #ubuntu [] === mode/#ubuntu [-o Madpilot] by ChanServ [06:06] santeria[FL] : Yeh, intell releases open source drivers so support for them "out of the box" is much better than for nvidia === Tomcat_`` [n=Tomcat@p54A18299.dip0.t-ipconnect.de] has joined #ubuntu [06:06] so youre saying i can install nvidia drivers from that command prompt thingy? === rexbinary [n=rexbinar@unaffiliated/rexbinary] has joined #ubuntu === Tomcat_`` is now known as Tomcat_ === Sir_Brizz [n=brizz@c-67-169-245-85.hsd1.ut.comcast.net] has joined #ubuntu [06:07] can anybody say whether ubuntu edgy detects existing linux partitions [06:07] santeria[FL] : Yes. [06:07] complicated right? [06:08] Jordan:Does ubuntu edgy detect existing linux partitions [06:08] niru: it did on my install === mbamford [n=Matt@d207-81-186-112.bchsia.telus.net] has joined #ubuntu [06:08] santeria[FL] : Only for me, for you, you just need to type in the commands I give. [06:08] and what about windows partition === akawaldo [n=garrett@pool-71-245-122-250.cmdnnj.fios.verizon.net] has joined #ubuntu [06:08] niru: yes, that too [06:08] so should i just write them down on a piece of paper, or... === jarrad_ [n=jarrad@203-173-52-216.dyn.iinet.net.au] has joined #ubuntu [06:08] lol [06:09] i dont think the other computers in my house have irc or anything === mister_roboto [n=jrk@24-136-10-99.hnc-bsr1.chi-hnc.il.cable.rcn.com] has joined #ubuntu [06:09] bimberi:what about ubuntu edgys indian language support [06:09] niru: no idea sorry [06:09] Anyone familiar with this error: ""checking for X... configure: error: Can't find X libraries. Please check your installation and add the correct paths"" ? === aidanr [n=aidanr@83.147.134.5] has joined #ubuntu [06:09] is there a "single user/rescue mode" in ubuntu server that gives root to local term? Appears I've messed up shadow/passwd. [06:09] I am not getting any site for checking which all indian languages does ubuntu edgy support === ssbirds [n=ss@fl-69-68-136-66.sta.embarqhsd.net] has joined #ubuntu === hangfire [n=hangfire@200.95.149.220.cableonline.com.mx] has joined #ubuntu [06:10] sigger: from grub you can choose that mode, the menu.lst is setup that way [06:10] niru: try the live livecd you'll see [06:10] niru: try contacting the Ubuntu Indian LoCo Team - https://wiki.ubuntu.com/IndianTeam [06:11] morphish: no password needed to gain root, right? [06:11] nicolas:I just now tried and saw only Hindi and Bengali language support among indian languages [06:11] yea thats the command prompt htingy mine goes too [06:11] to [06:11] hey, is anyone else noticing bugs with the new NVIDIA drivers as compared to the beta ones? I'm getting a sort of "tearing", where parts of the screen don't update properly until something forces them to === Cholito [n=alejandr@87.218.67.122] has joined #ubuntu [06:11] root or some other thing === Xaxafrad [i=xax@ip70-191-55-106.sd.sd.cox.net] has joined #ubuntu [06:11] sigger: shouldn't, worst case boot your desktop CD, mount your / and chroot in, setting root password [06:11] sigger_ if there is no root password set up recovery mode goes straight to a root shell [06:11] uhmmm I just rebooted and got no sound === cyrenity [n=mustafa@202.141.252.73] has joined #ubuntu [06:12] so jordan is it a set list of commands i can just write down and punch in? [06:12] santeria[FL] : Yes. [06:12] santeria[FL] : sudo software-properties -e universe [06:12] sudo apt-get update [06:12] sudo apt-get install linux-restricted-modules-generic nvidia-glx [06:12] sudo dpkg-reconfigure xserver-xorg -phigh [06:12] ( choose nvidia when asked what driver to use ) [06:12] sudo gdm [06:12] hey all, i set up ssh on this computer, but i also have a guest account. how can i disable guest from logging in through ssh? [06:12] Hmm, lookups are taking ages since I installed ubuntu. Anything I should know? === noxxle [n=noxxle@24-179-180-188.dhcp.dlth.mn.charter.com] has joined #ubuntu [06:13] I never set a root pw and I thought I read that root account was "locked" by default [06:13] how long does it take YOU to reach a fully loaded desktop from power on? [06:13] santeria[FL] : Except that first line should say restricted instead of universe :) [06:14] see why would you need to chroot when you can just edit the file on the mounted drive? [06:14] sigger_: you're correct, ubuntu uses sudo === mbamford [n=Matt@d207-81-186-112.bchsia.telus.net] has joined #ubuntu [06:14] so sudo software-properties -e restricted? [06:14] !sudo | sigger_ [06:14] sigger_: sudo is a command to run programs with superuser privileges ("root"). Look at https://help.ubuntu.com/community/RootSudo for all information. [06:14] santeria[FL] : Yes. [06:14] sigger_: 'locked' means that it doesn't have a password setup. So you should get straight to a root shell in recovery mode === subir [n=subir@202.79.37.177] has joined #ubuntu === pungie [n=pungie@adsl-68-127-105-1.dsl.pltn13.pacbell.net] has joined #ubuntu === spek1 [n=spek2@70.134.216.114] has joined #ubuntu === concept10 [n=concept1@ppp-70-253-44-190.dsl.rcsntx.swbell.net] has joined #ubuntu [06:15] I was using sudo (hehe, that's how I got in this mess ;)) but since my pw's are borked, no access [06:15] I am a newbie... I had my wireless with wep key workig great.. I just bought a new linksys router and now, I can't get dhcp to work.. I try static ip that fails. Yet I can see it in the gui. I can see it when I do iwlist scanning... And if I leave the machine on overnight, sometimes it will magically be working again [06:15] edgy is WAY slower to boot than dapper [06:15] <--- very frustrated === viikio [n=vince@124.106.196.85] has joined #ubuntu [06:16] hi, i'm a stoopid noob, finished installing xubuntu and am trying to change grub's default boot option. i made the proper edits to /boot/grub/menu.lst, but it can't open the file for writing. am i supposed to use a special program for editing this file? [06:16] hi [06:16] noxxle: Usually it is the other way around. [06:16] crap, sound still not working [06:16] xaxafrad : use sudo === squeee [n=squee@ip70-162-71-25.ph.ph.cox.net] has joined #ubuntu === Dethread| [n=Dethread@c-71-202-46-142.hsd1.ca.comcast.net] has joined #ubuntu [06:16] Xaxafrad: you need to edit it as superuser - eg. sudo gedit /boot/grub/menu.lst === Amallya [n=Adyna@193.108.235.251] has joined #ubuntu [06:16] jordan how long does it take you to reach your desktop after powr on? === Yancho [n=yancho@195.158.87.23] has joined #ubuntu [06:17] ah, thanx === Xaxafrad goes to try [06:17] noxxle: never timed it. [06:17] if he didnt use sudp in the first place, he wouldnt have been able to save (modify) the file [06:17] pungie - make sure you have the correct mode, channel, etc [06:17] you should. [06:17] I just recently got mine working :P === mikebot [n=Michael@SR-6-219.resnet.ucsb.edu] has joined #ubuntu [06:17] noxxle: Why? [06:17] because i want to know, and im important [06:17] Hmm. mode and channel, how do I do that in /network/interfacces? === Whatsisname [n=whatsisn@75.72.177.215] has joined #ubuntu [06:17] you don't [06:17] pungie - get wifi-radar === jmoncayo [n=jmoncayo@200.107.56.90] has joined #ubuntu [06:18] should i have sudo? [06:18] sorry to bother with an out of topic question but is there somebody from paris around here? [06:18] can someone here help me with the opera web browser? [06:18] ok, apt-get install wifi-radar and then do what with it... very new, so any more direction before I reboot and try? === dungodung [n=felix@wikipedia/dungodung] has joined #ubuntu === spek1 [n=spek2@70.134.216.114] has left #ubuntu [] [06:18] pungie - go to .. err [06:18] sec [06:18] i set up ssh on this computer, but i also have a guest account. how can i disable guest from logging in through ssh? [06:18] let me boot up my system [06:18] what's the file for setting up what partitions are going to be automounted? [06:18] mikebot, sure, if you actually ask a question about it ;) === se7enone [n=anonymou@dsl-241-1-153.telkomadsl.co.za] has joined #ubuntu [06:18] hi guys, i need help playing flash videos in firefox.. i can play them in windows but not in ubuntu.. i've already installed flash player 7 for linux [06:18] googling wifi radar rihgt now [06:19] Madpilot: heh, ok, i am trying to add a serach thing, and i want it to put a '+' for a space instead of a '%20' [06:19] pungie - dapper or edgy? [06:19] !fstab | dungodung [06:19] dungodung: The /etc/fstab file lists all drives and partitions that are mounted on the system. See http://www.tuxfiles.org/linuxhelp/fstab.html and !partitions [06:19] ah, thanks [06:19] dapper [06:19] ah [06:19] mikebot, ah... not sure; %20 is just the encoding for a blank space [06:19] pungie it is really recommanded to upgrade [06:19] the old router worked fine before... now this new one is 'flakey' [06:19] Madpilot: ok, i have another question for you then [06:19] o_o; [06:19] Yeah need an inet connection to upgrade =) [06:19] Vuen: you can use the usermod program to make the default script for guest /bin/false === tuxtheslacker [n=travis@67.128.92.11] has joined #ubuntu [06:20] i don't think i have sudo.... [06:20] Vuen: i.e. do not let them execute a login script [06:20] pungie okay. the dapper repo doesn't have wifi-radar so you gotta manually find it, and install it [06:20] ok can do that [06:20] http://www.gnome-look.org/content/pre2/48185-2.jpg what desklet manager is that? === cevia1 [n=mat@cpe-72-229-172-65.nyc.res.rr.com] has left #ubuntu [] [06:20] So I will take over my ifconfig and ifup ifdown network interfaces etc? [06:20] does anyone know of any link to help me with my router? [06:20] !router [06:20] Xaxafrad: Why do you say that? [06:20] Sorry, I don't know anything about router - try searching on http://bots.ubuntulinux.nl/factoids.cgi [06:20] Madpilot: i tried to get ubuntu to work on this computer, but i can't get internet (i am on a school lan), and when i type in a terminal 'dhclient' i get: 'No DHCPOFFERS recieved. No working leases in persistent database.' [06:20] it's not in /bin [06:21] pungie - yeah it'll take over everything [06:21] here goes nothing === oKtosiTe-robot [n=oKtosiTe@unaffiliated/oKtosiTe] has joined #ubuntu [06:21] thanks LGKeiz, I will give that a chance [06:21] mikebot, are you sure they don't assign you an IP? [06:21] sudo is in /usr/bin [06:21] Dapper has wifi-radar in it [06:21] one more question: is it safe for me to format (using gparted, if that matters) the first (boot) partition of a secondary hdd [06:21] sigger_: ah. that works, thanks :) [06:21] apt-cache search wifi-radar it's there [06:21] Its bizarre because it works some tmes and I can't get static to work for me for the life [06:21] Vuen :) [06:21] pungie when you get this installed, you will need to iwlist scan and get the mode and channel and manually set it in wifi-radar which has a gui to help you, and automatically detects networks [06:21] santeria[FL] : You need to be connected to the internet also. See you when you get back :) [06:22] cool [06:22] thanks LGKeiz I will hopefully get this happy [06:22] roger roger === clop [n=jared@cpe-24-28-66-79.austin.res.rr.com] has joined #ubuntu [06:22] LGKeiz: you finally get your driver working? [06:22] Can you run beryl with 2 monitors with ati? [06:22] mikebot, I know very little about networking; mine's always just worked, happily. For the Opera question, do try the Opera Forums, they can be very good. [06:22] Kingsqueak of course [06:22] rebooting now.. thanks [06:22] Madpilot: ok, well, thanks [06:22] LGKeiz: you should have stuck to nm-applet ;-) it would do WPA for you at least [06:22] when i try to apt-get remove totem, it tries to uninstall ubuntu-desktop... is that an important package? [06:22] Kingsqueak ndiswrapper -> driver, I had the wrong driver, kingsqueak, network-manager wouldn't work for me.. but wifi-radar worked perfectly [06:22] clop, only when it's time to upgrade to the next release of Ubuntu [06:23] LGKeiz: weird, glad you got it working === Volodya [n=Miranda@213.179.246.138] has joined #ubuntu [06:23] squeee: Try #ubuntu-xgl or #beryl , they know more about the specifics of beryl. [06:23] jordan: k thanks [06:23] Madpilot, is there a way for me to find out what is in that package? [06:23] can someone tell me of another desklet program aside from gdesklet? === charle97 [n=c@udp007163uds.hawaiiantel.net] has joined #ubuntu === LGKeiz-Ubuntu [n=LGKeiz@ppp-70-225-184-5.dsl.chmpil.ameritech.net] has joined #ubuntu [06:24] CAn someone tell me a package that lets me record video of what is on the screen? [06:24] clop, it's just a meta-package, to get other stuff w/ content to actually install. Removing it doesn't remove the rest of the packages it installs. [06:24] hihi [06:24] Kingsqueak :) === genbie [n=hathal@host86-143-114-152.range86-143.btcentralplus.com] has joined #ubuntu [06:24] heh [06:24] Kingsqueak mIRC @ linux = funny [06:24] Wine <3 [06:24] lol [06:24] try irssi [06:24] Madpilot, oh, alright, thanks :) [06:24] I'm a mIRC scripter [06:25] or if you like GUI, xchat === Elive_user57 [n=Elive_us@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu [06:25] heh [06:25] sigger_: ah, found a better way. i can simply add AllowUsers nick in the sshd_config to only allow myself to login. that way guest can still log in to a terminal. [06:25] yeah, crazily enough, wine works with mirc [06:25] :p [06:25] I use it. [06:25] time for sleep [06:25] later mate === B_166-ER-X [n=ghost@c207.134.47-108.clta.globetrotter.net] has joined #ubuntu [06:25] night [06:25] hi guys, i need help playing flash videos in firefox.. i can play them in windows but not in ubuntu.. i've already installed flash player 7 for linux.. i can play videos on youtube but.. im trying to view something which is on my machine, a webpage which plays videos.. it displays the page properly but the videos dont work.. is there something else i need? [06:25] Vuen: ok, but I thought you didn't want guest to be able to login === drayen_ [n=drayen@ip-89-168-32-108.cust.homechoice.net] has joined #ubuntu [06:26] sigger_: i don't want guest to login through ssh. i want them to be able to login locally [06:26] l>.> [06:26] oooh [06:26] School tomorrow : [06:26] :( [06:26] viikio, try flash 9 beta? [06:26] viikio - 64bit proc by any chance? [06:26] viikio, the site probably requires newer version of flash. [06:27] ok.. i'll try flash 9 [06:27] because adobe doesn't make a 64 bit version of flash player for linux === Versed [i=Versed@c-69-253-173-154.hsd1.nj.comcast.net] has joined #ubuntu === Mez -> bed [06:27] hm.... 64 bit? how do i know if im 64 bit? [06:27] alsamixer works for me and still no sound [06:28] is /usr/bin not in the path already? i click on "applications", "run program...", then type "sudo gedit " but nothing happens [06:28] generally it is one of the listed features when you get a new computer [06:28] any pointers for me? I'm trying to mount my Kodak camera in Edgy [06:28] viikio, what processor do you have? intel or AMD? [06:28] ....somebody gave this to me.. i have intel centrino duo [06:28] !edgytorrentproblem [06:28] Sorry, I don't know anything about edgytorrentproblem - try searching on http://bots.ubuntulinux.nl/factoids.cgi [06:28] torrent works fine for me w/ edgy === Phlosten [n=Phlosten@138.130.150.148] has joined #ubuntu [06:29] hmm.. [06:29] You know that bottom gui on MAC [06:29] why does on edgy, i cannot start more than one torrent download ? (with bittorrent client, and freeloader just doenst work) [06:29] Can you get that Ubuntu somehow? [06:29] no camera mounting help, then? [06:30] viikio, "uname -a" in terminal [06:30] !eclair [06:30] Sorry, I don't know anything about eclair - try searching on http://bots.ubuntulinux.nl/factoids.cgi [06:30] Xaxafrad: sudo is a command-line program, for gedit use gksudo [06:30] jStefan, what's he looking for? === Jordan_U_ [n=jordan@h-68-165-173-18.snvacaid.dynamic.covad.net] has joined #ubuntu [06:30] oh [06:30] B_166-ER-X, Maybe it is a today problem with torrent.. For me right now it is really slow [06:30] tuxtheslacker, 32bit / 64bit === dave_forthhack [n=dave@host81-129-15-240.range81-129.btcentralplus.com] has joined #ubuntu [06:31] Is it possible to do a vnc connection while a computer is at gdm? [06:31] uname -a: 2.6.17-10-generic #2 SMP Fri Oct 13 18:45:35 UTC 2006 i686 GNU/Linux [06:31] so "gksudo /boot/grub/menu.lst" should work? [06:31] cedriczg, nope, i read about it on forums , but it wasnt resolved... [06:31] and its not 'slow' it just dont want to start [06:31] viikio: that looks like 32bit to me. so try installing the latest flash player [06:31] jStefan, lspci | grep processor should do it, not uname. [06:31] Xaxafrad: you need to stick gedit in there (your editor) === LoneShadow [n=duh@c-67-188-235-220.hsd1.ca.comcast.net] has joined #ubuntu [06:31] B_166-ER-X, So what's the real problem? === digivore [n=digivore@S01060011950bc7e3.vc.shawcable.net] has joined #ubuntu [06:31] tuxtheslacker, he asked for "running" [06:31] seems like flash 7 is the newest.. i just visited the site [06:32] ohhhh! [06:32] flannel: if you have a 64 bit, you will see x86_64 in uname [06:32] Xaxafrad: no "gksudo gedit /boot/grub/menu.lst" [06:32] viikio, flash 9 is in beta. [06:32] why can't i view my root files in konqueror? i used to be able to...? i can only see my home dir... [06:32] there's a link to it in the restricted formats. [06:32] viikio, ^^ [06:32] cedriczg, that i cannot start more than one torrent ? [06:32] viikio, it comes out officially in january. [06:32] !flash9 | viikio [06:32] viikio: Flash player 9 beta has been released. You can download it here: http://seveas.imbrandon.com/dists/dapper-seveas/custom/ (replace dapper-seveas with edgy-seveas for edgy) - Official Adobe page at http://labs.adobe.com/downloads/flashplayer9.html [06:32] B_166-ER-X, ok [06:33] viikio: IMHO flash9 seems much less "beta" than the joke that is flash 7. === [DJ] Dave [n=UPP@pool-71-254-164-136.lsanca.fios.verizon.net] has joined #ubuntu [06:33] jordan: I can crash flash 9 easily, flash 7 i have a harder time with [06:34] cedriczg, [06:34] https://launchpad.net/distros/ubuntu/+bug/69598 === Dethread| [n=Dethread@c-71-202-46-142.hsd1.ca.comcast.net] has joined #ubuntu === PapaLion [n=will@137.141.235.130] has joined #ubuntu [06:34] thanks for the links! [06:34] the funny thing is that amarok looks like is playing sound... [06:34] squeee: But at least it doesn't break your sound ( I know aoss, but still ) [06:35] jordan: both have sound that work just fine for me, but the av sync sucks in 7 === mardi_soir [n=mardi_so@AReims-157-1-6-207.w86-207.abo.wanadoo.fr] has joined #ubuntu [06:35] i don't see gedit in either /bin or /usr/bin [06:36] squeee: Try playing sound from another application at the same time though... and yeh, the av sync sucks for everybody :) [06:36] i tried mousepad but got a empty file [06:36] My distro upgrade seems to hang up setting up libpam-modules. Should I kill it, reboot or what? === JackPhil [n=chatzill@202.107.242.254] has left #ubuntu [] === sigger_ [n=Sigger@ool-44c0a897.dyn.optonline.net] has left #ubuntu [] [06:37] hello i have a problem when a lauch X with Driver "savage" in xorg.conf it does not work no reponse the computer does not seems to be crashed but a can' t do anything and a i have to reboot ... lspci tell me it s a s3 savage [06:37] so i need hep === [DJ] Dave is now known as KernelX [06:37] it is dapper lts === bronson [n=bronson@c-71-198-75-160.hsd1.ca.comcast.net] has joined #ubuntu === shmho_ [n=shmho@134.75.55.113] has joined #ubuntu === idontknow2 [n=harshul@c58-107-78-152.blktn1.nsw.optusnet.com.au] has joined #ubuntu === tich [n=bradley@bas3-montreal02-1096683457.dsl.bell.ca] has joined #ubuntu === asarch [n=ubuntu@189.130.47.165] has joined #ubuntu [06:39] Hi everyone, how is it getting along? === fogos [n=marco@189.158.16.91] has joined #ubuntu [06:40] i just tried to load my nvidia driver (following the wiki) which i have done many times before and this time it won't load. help? === poopotootti [n=poopotoo@c193-229-37-194.elisa-laajakaista.fi] has joined #ubuntu [06:40] tich: Any errors? === idontknow [n=harshul@c58-107-78-152.blktn1.nsw.optusnet.com.au] has joined #ubuntu [06:40] if the 'r' key is broken on my laptop, is there an alternate way to maybe copy and paste an r into the run program box? === jollaman [n=leejw@dhcp-0000040002-5d-1b.client.fas.harvard.edu] has joined #ubuntu === j_ack_ [n=rudi@p508D87DC.dip0.t-ipconnect.de] has joined #ubuntu [06:41] Xaxafrad: use the mouse (the middle button === ro1 [n=ron@port0002-abm-adsl.cwjamaica.com] has joined #ubuntu [06:41] Hi guys, I am having a little problem with the installation program [06:41] Jordan_U_, yes. unable to load nvidia kernal driver be sure to have installed the nvidia driver for your running kernel. [06:41] Xaxafrad, or if you don't have middle button push lef and rifght button at the same time [06:41] cholito: you mean the scroll button, or do i have the wrong kind of mouse? === BHSPitMonkey [n=stephen@adsl-65-67-112-77.dsl.rcsntx.swbell.net] has joined #ubuntu === ausimage [n=owner@pool-129-44-212-45.syr.east.verizon.net] has joined #ubuntu [06:42] ausimage, and nobody else is experiencing what you are, to my knowledge. sounds like the problem is on your end [06:42] hey i did a lshw -C [06:42] You'll see: I already been using Fedora and when I select the first partition of my hd the programs shows an error that there is no root partition [06:42] on network [06:42] i saw my wireless is disabled [06:42] Jordan_U_, which should be no problem because that is the first step in the wiki [06:42] where do i go from there [06:42] Xaxafrad, I think the scroll button should work as well [06:43] Xaxafrad: press both mouse button from your laptop to paste the text [06:43] can anyone help with [06:43] tich: Did you compile a custom kernel? [06:43] yeah! (l+r did the trick :) [06:43] lshw -C === PapaLion [n=will@137.141.235.130] has left #ubuntu ["Ex-Chat"] [06:43] Xaxafrad, select the text (don't even have to do a crtl-c) and then use the middle button of the mouse to paste [06:44] Jordan_U_, i don't think so... if i could do it accidently i might have but i don't think that is possible. [06:44] Can anyone explain why bash scripts located on a mounted partition under /media gives me a bad interpreter: no permission? The script runs fine from the home directory. [06:44] Jordan: Can you help with lshw stuff [06:44] tich: No, it isn't :) [06:44] thanx guys [06:44] Jordan_U_, i switched from the generic to 386 (restricted modules) [06:44] (and gals?) [06:44] Xaxafrad, Your welcome === ro1 [n=ron@port0002-abm-adsl.cwjamaica.com] has left #ubuntu [] === MugginsM [n=jennyj@202-74-216-16.ue.woosh.co.nz] has joined #ubuntu [06:45] Xaxafrad: sorry, yes, the one in the scroll [06:45] tich: You need to install the generic package, it will still use the 386 modules. [06:46] I see you got it working... [06:46] Jordan_U_, should i uninstall the 386 package, the first time i tried to enable it they were both installed === darius_ [n=darius@integrity.bourg.net] has joined #ubuntu [06:46] tich: No, they should both be installed. === Xaxafrad [i=xax@ip70-191-55-106.sd.sd.cox.net] has left #ubuntu [] [06:47] Is Easy Ubuntu a good tool for Edgy? === cyberglitch [n=wil@netblock-208-127-49-193.dslextreme.com] has joined #ubuntu [06:47] !easyubuntu | darius_ [06:47] darius_: easyubuntu is easyubuntu is a script that automates installation of some items. Use at your own risk. See http://easyubuntu.freecontrib.org/ - For help and or discussions about EasyUbuntu please join #easyubuntu [06:47] darius_: You don't need it, but I havn't heard of problems with it like I have with automatix [06:47] crap, no sound yet... [06:48] Jordan_U_, when i uninstalled it removed something else as well but it isn't going to put it back with the reinstall is that okay? [06:48] if not easyubuntu, is there a good wiki page that covers edgy? === Cre[a] tiveEmb[a] is now known as CreativeEmbassy [06:48] tich: What isn't it going to put back? === kharr [n=daehlie@c-67-182-212-243.hsd1.ut.comcast.net] has joined #ubuntu === rootusr [n=rootusr@S010600119575fc93.cg.shawcable.net] has joined #ubuntu [06:49] I am trying to compile again my scilab [06:49] darius_: wiki.ubuntu.com? [06:49] I had to reinstall ubuntu [06:49] but now I have this error === tich_ [n=bradley@bas3-montreal02-1096682311.dsl.bell.ca] has joined #ubuntu === kharr is now known as Daehlie === Vuen [n=Vuen@bas9-ottawa23-1088816813.dsl.bell.ca] has joined #ubuntu [06:49] configure: error: Unable to configure: no Fortran compiler found [06:50] !restricted | darius_ [06:50] darius_: For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats === satshen [i=user@59.92.157.237] has joined #ubuntu [06:50] Can anyone tell me the better fortrtand compiler to use? or other solution [06:50] question, how can i make sudo require the root password instead of my user password? and this information used to be in ubuntuguide, where has it gone? [06:50] cedriczg: apt-get install gfortran g77 [06:50] Jordan_U_, if you responded to my last question i missed it my connection stopped for a coupe of seconds. sorry. [06:50] thanx === madewokherd [n=urk@VRP5000.rhbd.psu.edu] has joined #ubuntu === bbt [i=sam@60-240-210-95.tpgi.com.au] has joined #ubuntu === satshen [i=user@59.92.157.237] has left #ubuntu [] [06:51] Vuen: In that case you might as whell just enable the root account. === PuMpErNiCkLe [n=pumperni@CPE000d8802a749-CM0012c9a9a6dc.cpe.net.cable.rogers.com] has joined #ubuntu === poopotootti [n=poopotoo@c193-229-37-194.elisa-laajakaista.fi] has joined #ubuntu [06:51] tich_: What isn't it going to put back? === PuMpErNiCkLe [n=pumperni@CPE000d8802a749-CM0012c9a9a6dc.cpe.net.cable.rogers.com] has left #ubuntu ["bar"] [06:52] Vuen, merci beaucoup === joelliot [i=user@59.92.157.237] has joined #ubuntu === BHSPitMonkey [n=stephen@adsl-65-67-112-77.dsl.rcsntx.swbell.net] has left #ubuntu ["Leaving"] === mikebot [n=Michael@SR-6-219.resnet.ucsb.edu] has left #ubuntu [] [06:52] Jordan_U_, i don't know, i didn't write down what it removed, i thought it was okay === Fallen_Angel [n=info@213.175.95.175] has joined #ubuntu === richiefrich [n=dethwish@unaffiliated/richiefrich] has joined #ubuntu === Terminus [n=justin@210.213.149.89] has joined #ubuntu [06:53] tich_: It should be, I just wanted to be sure. [06:53] Could I get an answer to my query about why bash scripts are being difficult on mounted drives. It worked under dapper. [06:53] cedriczg: no problem. keep in mind this is two different compilers, one for fortran 95 and one for fortran 77. === fulld [n=fulld@pool-70-20-216-66.phil.east.verizon.net] has joined #ubuntu [06:53] so make sure you compile with the right one [06:53] ausimage: Are you using #!/bin/sh at the start? [06:53] is there a guide for ethernet bridging in ubuntu? === DavidCraft [n=g@ip70-161-25-162.hr.hr.cox.net] has joined #ubuntu [06:54] Vuen, ok. I am trying now again the compilation process... [06:54] waaaaah :((! i was able to play the video after installing flash player 9.... but it wont play again.. [06:54] How do you make an instence of X-Server that does NOT output to the screen? [06:54] Yeah... I am these scripts are liked on a /media/* mounted partition and complain loudly about bad interpreter permission denied === NewcomerXb [n=martin@c-68-52-187-205.hsd1.tn.comcast.net] has joined #ubuntu [06:54] Caplain_ : see this "how to" http://www.howtoforge.org/ [06:54] ausimage: In Edgy /bin/sh != /bin/bash [06:54] viikio, flash 9 in lnux?!! [06:55] Jordan_U_, i tried to enable it again but i still get the same warning. [06:55] labs.adobe.com [06:55] ausimage: Use /bin/bash [06:55] Fallen_Angel: ok thx [06:55] yeah.. the guys gave the link to me [06:55] Jordan_U the same script on /home/* runs no problem [06:55] viikio, is it available? [06:55] Hey everyone. Im having issues with this "cannot detect HAL" thing [06:55] hi ,,, can grub be installed to root partition with ubuntu 6.10 live cd? [06:55] it's in beta === e_machinist [n=matthew@dialup-4.90.7.83.Dial1.Dallas1.Level3.net] has joined #ubuntu [06:55] I think its affecting my graphics [06:55] how do I know if I have ndiswrapper-utils installed ? I have installed ndiswrapper, but I cvant get it work, and plannin to try older version. uninstallation guide says also to "apt-get remove ndiswrapper-utils" and I cant do that [06:55] tich_: It said your running kernel, so you may need to restart. [06:56] anyone can access http:www.optionsxpresseurope.com with firefox here please? [06:56] joelliot: Yes. === Skal [n=skal@ADijon-258-1-66-195.w90-6.abo.wanadoo.fr] has joined #ubuntu [06:56] Jordan_U_, yeah i give it a shot. [06:56] http://www.optionsxpresseurope.com [06:56] I'm using Dapper, 6.06, and firefox 2.0 is not in any of my repositories (I have mutli and univ enabled). Is there a backports repository from Edgy or something that I am missing? === goose [n=goose@unaffiliated/goose] has joined #ubuntu === santeria[FL] [n=infectio@ip24-170-193-114.ga.at.cox.net] has joined #ubuntu [06:56] joelliot: There is an option during the installer to install grub to a different partition. [06:56] grr linux hates me [06:56] yes floating thanks [06:57] can access [06:57] Jorddan_U thanks ,,, will give it a try [06:57] santeria[FL] : Didn't work I guess? [06:57] Ubuntu isnt mounting my drives right at all. I have to flick off and flick on my external HD suddenly when it lags during bootup [06:57] floating i can't!! can you tell what could possible be wrong? [06:57] That must have somnething to do with "cant detect HAL" === abes [n=abes@rn-v1w2a13.uwaterloo.ca] has joined #ubuntu === Jordan_U_ is now known as Jordan_U === k1n6k0d3 [n=xphaqtor@69.150.2.232] has left #ubuntu [] [06:57] Hello :] === ausimage [n=owner@pool-129-44-212-45.syr.east.verizon.net] has left #ubuntu [] [06:57] how do you figure out where a package has installed files? [06:57] e_machinist: just dist upgrade if you want firefox 2.0 or build it from source [06:57] genbie: no i cant tell :i [06:57] hello abes [06:57] ok!! [06:58] i know synaptic has something but is there a way to do it from command line? [06:58] ok on the second line: sudo apt-get update it said somehting like ign www.ubuntu.com some file [191b] and i figured 191 bytes should take less than a second but it just stayed there [06:58] Can anyone tell me if thats possible to get my turn off and restart buttons back to the screen that appears after I click on the [( I )] button? [06:58] the turn off button === goose [n=goose@unaffiliated/goose] has left #ubuntu [] [06:58] Daehlie: I will build from source. One Q though: when I do the full upgrade, will this redownload everything, or only whats out of date and new stuff? (Which is probably most everything). === CreativeEmbassy is now known as Cre[a] tiveEmb[a] [06:58] So i guess nobody knows :( === pradeep [i=pe@59.92.37.254] has joined #ubuntu [06:59] i just have log out, lock screen, switch user and hibernate === tich_ [n=bradley@bas3-montreal02-1096682311.dsl.bell.ca] has joined #ubuntu [06:59] it will only download what is updated, which is almost every package === nickjhfjd [n=nick@203-211-109-29.ue.woosh.co.nz] has joined #ubuntu === Cholito [n=alejandr@87.218.67.122] has joined #ubuntu [06:59] network access issue: happens with all browsers on ubuntu but no problem on windows: anyone can access http://www.optionsxpresseurope.com please? [06:59] and also my wi-fi was working properly and just stopped randomly... tried most of the stuff i found online but no luck [06:59] Daehlie: yah, that is what I figured. I'll just get an ISO. [06:59] Jordan_U, nvidia didn't load even after the restart. i get the same warning. [07:00] genbie: works fine with firefox 2.0 === bbt [i=sam@60-240-210-95.tpgi.com.au] has joined #ubuntu === NewcomerXb [n=martin@c-68-52-187-205.hsd1.tn.comcast.net] has left #ubuntu [] [07:00] nothing about this edgy install has been simple [07:00] tru dat [07:00] abes thanks i get a "Firefox can't find the server at www.optionsxpresseurope.com" error [07:00] ugh === user-land2 [n=user-lan@217-162-168-80.dclient.hispeed.ch] has joined #ubuntu [07:00] genbie: hmmm... is it with only that website? [07:00] still no sound [07:00] e_machinist: thats the way to go, i did a dist upgrade, waited 2 hours, when it was done gnome is broken and I end up running the install anyway [07:00] yes abes === B1zz [n=cgomez@69.166.114.11] has joined #ubuntu [07:01] I have no idea where to look =( [07:01] genbie: have you tried pinging that host? [07:01] Hello, I need help installing ubuntu from iso (without cd rom). I've looked at ubuntu forums, but none seem to helpful. [07:01] tich_: Try asking on #ubuntu-xgl , just tell them you just need help with the drivers and not XGL. === B1zz [n=cgomez@69.166.114.11] has left #ubuntu ["Leaving"] === mekkis [n=ti89rule@nasmartzone011.wireless.griffith.edu.au] has joined #ubuntu === andy_t_roo [n=Andrew@ahill.roam.itee.uq.edu.au] has joined #ubuntu [07:01] amarok still looks like it's playing sound (no error or anything) but nothing comes from the speakers [07:01] Jordan_U, okay thanks [07:01] anyone got any ideas with my little delimma? [07:01] so anyobody? any idea about why there are not turn off and restart options anymroe? === pungie [n=pungie@adsl-68-127-105-1.dsl.pltn13.pacbell.net] has joined #ubuntu [07:01] or why would wi-fi randomly stop working [07:02] ? === joelliot [i=user@59.92.157.237] has left #ubuntu [] [07:02] abes pinging is OK === fuu_ [n=fuu@dslc-082-082-087-046.pools.arcor-ip.net] has joined #ubuntu [07:02] genbie: do u have firefox 2.0? [07:02] ok on the second line: sudo apt-get update it said somehting like ign www.ubuntu.com some file [191b] and i figured 191 bytes should take less than a second but it just stayed there [07:02] yes abes [07:03] Daehlie: thanks for your assistance. === jollaman [n=leejw@dhcp-0000040002-5d-1b.client.fas.harvard.edu] has left #ubuntu [] === e_machinist [n=matthew@dialup-4.90.7.83.Dial1.Dallas1.Level3.net] has left #ubuntu [] === NewcomerXb [n=martin@c-68-52-187-205.hsd1.tn.comcast.net] has joined #ubuntu [07:03] Ok I am back.. I got wifi radar, did iwlist ath0 and got the info.. it connects but with DHCP I get no ip address =(... I try static and I can't even ping teh gateway [07:03] santeria[FL] : It shouldn't have, did any of the files download or did it get stuck on the first? [07:03] bah ! :/ [07:03] genbie: hmmm maybe theres something with your dns [07:03] i think it might have gotten thruough a couple [07:03] Nobody knows what to do about the "can't detect HAL" thing? Anyone? c.c >.> [07:03] how can i solve that abes plz?! [07:03] but you would think 191 b would be fast as a blink of an eye [07:04] I nkow the router works, because my windows box connects no isseus [07:04] genbie: i cant ping it... hold on a sec... === therapy [n=Unknown@d54C0E99B.access.telenet.be] has joined #ubuntu === re-align [n=re-align@ip68-105-125-114.sd.sd.cox.net] has joined #ubuntu [07:04] how can i replace a file in /usr/lib/firefox/plugins? it wont let me paste there.. how can i make it work? [07:04] abes ok thanx === lotheac [n=lotheac@lamopinaatti.telemail.fi] has joined #ubuntu [07:04] viiko, you have to be root [07:04] ok, ill look elsewhere [07:04] do you think if i put my monitor on my motherboard vga port i could get into ubuntu and then install the nvidia drivers from the actual os? === NewcomerXb [n=martin@c-68-52-187-205.hsd1.tn.comcast.net] has left #ubuntu [] === NewcomerXb [n=martin@c-68-52-187-205.hsd1.tn.comcast.net] has joined #ubuntu [07:05] Eeep it said i had messages. === NewcomerXb [n=martin@c-68-52-187-205.hsd1.tn.comcast.net] has left #ubuntu [] [07:05] santeria[FL] : All I can say is that shouldn't have happened and to try again, if it fails again press ctrl+x to stop it then run the command again ( press the up arrow and you won't have to type it in again ) [07:05] how do i become root? === Lam_ [n=Lam@128.227.23.106] has joined #ubuntu [07:05] is wifi not working on a new router or working randomly a common ubuntu occurance [07:05] ok [07:05] viikio, you don't need to. User sudo & your own user password [07:05] santeria[FL] : Make that ctrl+c :) [07:05] is that command necesary? what does it do exactly [07:05] genbie: try http://69.25.159.40 and see if it opens [07:05] does it update the os or something? [07:06] any other ideas on if i can connect to the router, I can see it... but cant get an ip.. staically picking one, cant ping the gateway === hedix [i=usr889@c1.edrana.lt] has joined #ubuntu [07:06] santeria[FL] : It tells apt where to download the drivers from. [07:06] i should do that using terminal? [07:06] pungie: what do you mean by i can see it? like see it standing on the shelf? :P === andy_t_roo [n=Andrew@ahill.roam.itee.uq.edu.au] has left #ubuntu [] [07:06] no.. I can see it by if I do iwlist ath0 scanning, the router appears and shows me its info... it pops up in my list in wifi radar [07:07] tell me if i got the next command after that right : install linux-restricted-modules-generic nvidia-glx [07:07] or [07:07] pungie: maybe you have mac filtering on or the wep/wpa key is incorrect - double-check those first [07:07] sudo apt-get install linux-restricted-modules-generic nvidia-glx [07:07] genbie: so... did it open? [07:07] ok.. i know its not mac filtering on my router.. maybe I have typo in the key, but did double check.. I will try that again.. .was seeing any other ideas [07:08] santeria[FL] : sudo apt-get install linux-restricted-modules-generic nvidia-glx [07:08] pungie: try disabling encryption completely first and see if it connects [07:08] i guess thats right then [07:08] pungie: so at least you know that hardware on both ends is ok [07:08] ok === denver [n=denver@12.107.36.226] has joined #Ubuntu [07:08] While doing apt-get dist-upgrade I got the following "/var/cache/apt/archives/lmms-common_0.2.1-1.1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1)" Can someone give me a pointer ? [07:08] abes yes it opens but very slow and bad page layout [07:09] ok. will do that... the weird thing is i left my machine on over night and the next day it was connceted.. next reboot no more [07:09] d [07:09] santeria[FL] : Good luck :) [07:09] genbie: well it may not load the css properly [07:09] will try that again === fulld [n=fulld@pool-70-20-216-66.phil.east.verizon.net] has joined #ubuntu [07:09] i'll need it =\ [07:09] genbie: but the page loads with IP but not with the hostname, right? [07:09] yes abes [07:10] Need help: no "Turn off" or "Restart" icons when i press the "Log out/Turn off" button [07:10] do wifi radar know by default the key is Hexadecimal? if I do it by hand in /etc/network/interfaces i jus === ademan [n=dan@h-67-101-148-217.snfccasy.dynamic.covad.net] has joined #ubuntu [07:10] pungie: you can do it in interfaces and just copy it from whatever it is in the router [07:10] pungie: are you using wep or wpa [07:10] genbie: so then it is your dns most likely [07:10] I am using wep [07:10] CRAP!! I found the problem with the sound [07:11] abes, did you try to do manually restart? [07:11] abes thanx, how can i fix that! [07:11] Vaske_Car: well it does restrt normally from console... but i wanted the buttons there :p [07:11] who was the other one with the sound problem? [07:11] with the amd64? [07:11] genbie: just one sec... im a noob myself :] [07:11] I changed the security setting on my wireless AP. However, I'm unable to connect to the network now. I switched from unprotected to WPA-PSK. === zero742 [n=bret@12-214-0-94.client.mchsi.com] has joined #ubuntu [07:11] oh ok abes ;-) [07:11] abes, I had the same problem, restarted PC with button and its OK now [07:12] re-align: WPA may need some extra modules to support WPA [07:12] Vaske_Car: well... didnt work with me... whatever - its not a biggie... ;] [07:12] Vaske_Car: thanks anyways [07:12] np [07:12] how do i check kernel info? === Nuked [n=fluxinat@ool-44c7d376.dyn.optonline.net] has joined #ubuntu [07:13] uname -a [07:13] I'm using Edgy and there are some WPA modules already installed. [07:13] tich_: you can check the version with: uname -r. [07:13] never mind, restarted apt-get dist-upgrade and it seems to be happy to go continue [07:13] if this fails I ll just upgrade to edgy [07:13] how do you change your dns ip addresses? === viikio [n=vince@124.106.196.85] has left #ubuntu [] [07:13] anyone know a place aside from get-e where I can find enlightenment dr17 themes? === u^A [n=allberto@124.82.72.6] has joined #ubuntu [07:14] abes: In /etc/resolv.conf === sambos [n=sam@125-236-173-69.broadband-telecom.global-gateway.net.nz] has joined #ubuntu [07:14] hello === fulld [n=fulld@pool-70-20-216-66.phil.east.verizon.net] has joined #ubuntu === andy_t_roo [n=Andrew@ahill.roam.itee.uq.edu.au] has joined #ubuntu [07:15] Jordan_U, it says i am using 2.6.17-10-386, that should be fine for nvidia-glx right? === raphink [n=raphink@ubuntu/member/raphink] has joined #ubuntu [07:15] Which modules are needed for WPA to work properly/ === NewcomerXb [n=martin@c-68-52-187-205.hsd1.tn.comcast.net] has joined #ubuntu [07:15] i had an awesome looking screen with clear type easy to read fonts then i installed the ati drivers the process worked but now my fonts ugly and i can only get 60hz at this resolution before it was 75 on the moniter please help [07:15] pulling hear out [07:15] Jordan_U: is the "nameserver IP_ADDRESS" line the DNS one? and do you have to restart network after u change it? [07:16] tich_: No, it should be 2.6.17-10-generic [07:16] how do i have ubuntu automatically setup my network bridge on boot? [07:16] abes: I bleive so, and I believe so :) === tw|sT3d [i=twist3r@202.175.230.35] has joined #ubuntu [07:16] I run linux from a USB HDD and it has been great for some time. But right now whenever I turn on my computer, it freezes at the point it mounts the drive. I turn the drive off and on right then and it continues the boot process. Could fsck work, and is it really as dangerous to my files as its warning says? :( [07:16] how do i have ubuntu automatically setup my network bridge on boot? [07:17] I received the following error "/boot/initrd.img-2.6.15-26-386 [07:17] cp: cannot stat `/etc/mdadm/mdadm.conf': No such file or directory" can someone help ? [07:17] oh, in the wiki it said the generic would crash x, how do i change to generic? [07:17] Jordan_U: hehe... ok lets see [07:17] Jordan_U, oh, in the wiki it said the generic would crash x, how do i change to generic? [07:17] so i have to change /etc/resolv.cong abes ;-)? [07:17] tich_: It said generic would crash X? I didn't realize that. [07:17] can anyone help? [07:17] how can I display the size of a directory? [07:18] /msg nickserv set unfiltered on [07:18] ll [07:18] lol [07:18] Jordan_U, maybe that was for dapper or something === bbt [i=sam@60-240-210-95.tpgi.com.au] has joined #ubuntu === Caplain_ is now known as Caplain === Jbirk [n=jbirk@adsl-63-199-245-30.dsl.sndg02.pacbell.net] has left #ubuntu [] [07:18] tich_: Can you give me a link to the guide you are using? [07:18] how do u get cleartype fonts back under ubuntu 6.10? === santeria[FL] [n=infectio@ip24-170-193-114.ga.at.cox.net] has joined #ubuntu [07:19] >:| [07:19] santeria[FL] : :( [07:19] Is fsck dangerous to my files? It gives a warning... how can it damgae m y stuff? [07:19] genbie: do you use a router or you are connected directly to the internet? [07:19] apparently ctl c doesnt work, [07:19] abes directly === dr0ne [n=fn@CABLE-72-53-45-212.cia.com] has joined #ubuntu === Kaizer [n=kaizer@d51A522F5.access.telenet.be] has joined #ubuntu [07:20] Jordan_U, https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia?highlight=%28nvidia%29 [07:20] santeria[FL] : If so, then the system crashed. [07:20] and i found out the thing it stops on is like ubuntu.com/security en_translation or something [07:20] Jordan_U: but i meant DNS server your eth0 is using while connected to the net === NewcomerXb [n=martin@c-68-52-187-205.hsd1.tn.comcast.net] has left #ubuntu [] [07:20] is there another version of ubuntu that would work better? [07:20] santeria[FL] : Dapper. [07:21] the long term one? [07:21] santeria[FL] : Yes. [07:21] ok [07:21] hehe [07:21] more stable? [07:21] santeria[FL] : Or the alternate install for Edgy. === whatthedeuce [n=j@S010600134606305f.gv.shawcable.net] has left #ubuntu [] [07:21] would 64 bit work better? [07:21] is edgy unstable? [07:21] i installed ATI drivers now my fonts are ugly why? [07:21] santeria[FL] : Yes, they named it "Edgy" for a reason :) [07:21] santeria[FL] , what version you have right now? [07:21] hello i have a problem when i lauch X with Driver "savage" in xorg.conf it does not work,the computer does not seems to be crashed but a can' t do anything and a i have to reboot ... lspci tell me it s a s3 savage , it is dapper [07:21] guys any tips in installling my internal modem.... [07:22] Where is the DNS info stored? The IPs that I need in order to browse then web? === dcordes [n=dcordes@dslb-084-062-052-201.pools.arcor-ip.net] has joined #ubuntu [07:22] i'll copy paste it from the .iso shortcut [07:22] Pablo: I wouldn't say unstable, but people have been having a lot of problems with it. [07:22] so dapper is better? [07:22] ubuntu-6.10-desktop-i386 [07:22] abe... u can always use 4.2.2.1 and 4.2.2.2 for dns === rBlong2us [n=eddie@pool-151-202-11-200.nycmny.east.verizon.net] has joined #ubuntu === ezsquirt [n=bowser@vol21-1-82-224-19-51.fbx.proxad.net] has joined #ubuntu [07:22] Pablo: how come? [07:22] should the average fucking user use dapper or edgy? [07:22] Jordan_U, I just installed it so I was homing it want THAT bad [07:22] !modem | tw|sT3d [07:22] tw|sT3d: You want to connect via dial-up? Read https://wiki.ubuntu.com/DialupModemHowto === fulld [n=fulld@pool-70-20-216-66.phil.east.verizon.net] has joined #ubuntu [07:23] those are just dns servers that are always there [07:23] !mobem [07:23] !modem === SkramX [n=mark@HERCULES.sentiensystems.net] has joined #ubuntu [07:23] Sorry, I don't know anything about mobem - try searching on http://bots.ubuntulinux.nl/factoids.cgi === wastrel [n=wastrel@nylug/member/wastrel] has left #ubuntu ["l8r"] [07:23] You want to connect via dial-up? Read https://wiki.ubuntu.com/DialupModemHowto [07:23] hey all [07:23] ubotu: i did read that [07:23] Sorry, I don't know anything about i did read that - try searching on http://bots.ubuntulinux.nl/factoids.cgi [07:23] !dapper or fucking edgy? [07:23] Sorry, I don't know anything about dapper or fucking edgy? - try searching on http://bots.ubuntulinux.nl/factoids.cgi [07:23] ubuntu-6.10-desktop-i386 << thats what im trying [07:23] quick question: how do i execute a script at boot-time? [07:23] tw|sT3d: ubotu is an IRC bot :) [07:23] genbie: ok so can you tell me what you have in /etc/resolv.conf file? [07:23] lol [07:24] pablo if i can acess a site by ip but not by host name how can i resolve that plz? [07:24] but when i try the ./scanModem is says that /dev/modem not found === collin [n=collin@24-119-166-210.cpe.cableone.net] has joined #ubuntu === boni [n=boni@202.141.130.198] has joined #ubuntu [07:24] genbie: just "pico /etc/resolv.conf" [07:24] abes i have two ip addresses [07:24] ?? [07:24] Jordan_U: oooopzz sori for that.. [07:24] genbie set 4.2.2.1 and 4.2.2.2 as ur dns servers [07:24] how dod you know if the g++ compiler is installed [07:24] do [07:24] i should download dapper drake correct? [07:24] pablo how plz? in which file? [07:24] hi how disconect a camera? Should I just inplugged it? [07:25] in /etc/resolv.conf [07:25] I don't know I just wanna do this properly [07:25] and tehn restart pablo? [07:25] and is 64 bit worth downloading? or does it end up being like xp 64 bit where there are no drivers ever [07:25] santeria[FL] : If you don't want to have to jump through hoops to get your video working, yes. [07:25] yes to 64 bit? or yes to dapper drake [07:25] must I just unplugge it? I Bill Gate$ $oftware I have to "Safely REmove Device" [07:25] Jordan_U, here is the excerpt: Note: you have to select the restricted modules first because the nvidia-glx package automatically installs the i386 one - and if you have a generic kernel image, the X will not work [07:26] abes i will change the ip addresses in etc/resolve.comf and restart === SkramX [n=mark@HERCULES.sentiensystems.net] has left #ubuntu [] [07:26] I dont think you will have to reboot just nameserver 4.2.2.1 [07:26] Jordan_U: I got this putter working with Vesa, no DRI for while [07:26] ok pablo [07:26] genbie: just restart the network... should work [07:26] santeria[FL] : Dapper, no opinion on 64, but any open source drivers ( see most of them ) will support 64 bit. [07:26] ok [07:26] i think ill just go with 32 just to be safe [07:26] genbie: /etc/init.d/networking restart [07:27] can anyone tell me how to check if your bluetooth is on on Dapper [07:27] genbie: after you're done === fender [n=fender@mail.dropletsap.com] has joined #ubuntu === akira [n=akira@80.254.16.58] has joined #ubuntu [07:28] ok abes thankz [07:28] genbie: no problem === bbt [i=sam@60-240-210-95.tpgi.com.au] has joined #ubuntu [07:28] genbie: come back and let me know if it helped... === akira [n=akira@80.254.16.58] has left #ubuntu ["Leaving"] [07:28] How can I copy the /home/ and all subdirectories of a partion that wont boot but I have mounted, to a USB flash drive for backup so I can blow everything away and install fresh ? [07:29] can anyone tell me why would wi-fi stop working RANDOMLY? no changes were made whatsoever... instead of all wi-fi nets it was showing now it just says "Wired network connection"??? [07:29] tich_: Blame the ambiguity of the English language! I think the wiki means that the 386 will break x , not the generic :) === madewokherd [n=urk@VRP5000.rhbd.psu.edu] has joined #ubuntu [07:29] can anyone tell me how to check if my blutooth is on or not on Dapper??? === fulld [n=fulld@pool-70-20-216-66.phil.east.verizon.net] has joined #ubuntu [07:30] Jordan_U, huh. well i guess it is good that it didn't install. [07:30] tich_: So uninstall the 386, install the generic, install the restricted modules, then install the nvidea drivers, in that order. [07:30] boni: have you checked http://ubuntuforums.org/showthread.php?t=24546 ?? [07:30] Jordan_U, how do i remove the 386, is it the linux-restricted-modules? === ayaa [n=fourat@196.203.53.221] has joined #ubuntu === G-net|Gilnim [n=gilnim@unaffiliated/gilnim] has joined #ubuntu [07:31] river: cp -rf /home DESTINATION_PATH should do === mzli [n=mzli@221.196.90.33] has joined #ubuntu [07:33] i have i486-linux-gnu-cpp-4.1 in my usr/bin and usr/bin is part of my path, yet when I try to compile with g++ it says that g++ command not found? [07:33] abes thanks so much, it works now! === reazn [n=reazn@reazn.ozdsl.net] has joined #ubuntu [07:33] genbie: no problem :] [07:33] pablo thaanks a lot [07:34] abes i just had a number of errors on eth and wlan when restarting the network [07:34] because i am using an old computer i think ;-) [07:35] i have now added 4.2.2.2 as well === boni [n=boni@202.141.130.198] has left #ubuntu [] [07:35] thanks abes [07:35] bye [07:35] abes, do I need sudo so as to get access to user sub dirs ? is athere any thing else I should copy ? [07:35] sure genbie [07:36] pablo i have to have both 4.2.2.1 and 4.2.2.2 right? [07:36] river: sudo would be a good idea since some files have just rwx------ perms [07:36] no you can have one or 2 [07:36] river: well... personal data is pretty much /home [07:36] the second is just a backup [07:36] pablo strange that i was using other dns servers all these years without problem until now === Za1 [n=zawa@203-167-185-172.dsl.clear.net.nz] has joined #ubuntu [07:36] well [07:36] oh ok pablo [07:37] those have been up for about 12 years [07:37] :P [07:37] ah ok [07:37] genbie: see... cuz those servers wern't on ubuntu so they had to chrash one day or another :P [07:37] ;-) === cbx33 [n=pete@ubuntu/member/cbx33] has joined #ubuntu [07:37] yeah 12 years is a nice uptime :p === mekkis [n=ti89rule@nasmartzone011.wireless.griffith.edu.au] has left #ubuntu ["Leaving"] [07:37] say thanks to Level 3 Communications, Inc. === BoggsBeer is now known as Deaigo [07:37] lol === JoMaPa_ [n=josh@c-69-245-170-128.hsd1.in.comcast.net] has joined #ubuntu === sanityx [n=root@pool-68-160-206-219.ny325.east.verizon.net] has joined #ubuntu [07:38] if I slept through half of my live average then i have around 12 years uptime too :P [07:38] bye [07:38] cya === genbie [n=hathal@host86-143-114-152.range86-143.btcentralplus.com] has left #ubuntu ["Ex-Chat"] [07:38] Hi - I have s-video connection from my laptop to my projector and I would like to project to it. Any idea what I should be doing? should I be tweaking to the xorg.conf file? I have "ATI Technologies, Inc. Radeon Mobility M7 LW [Radeon Mobility 9000] " device running on Dell Inspiron 5100 laptop. [07:38] and it was mci's dns before that [07:38] Hey guys, I've booted off an Ubuntu 6.10 disc but X fails. Is there a way I can start a textual install from the console? [07:39] (I'm using console based IRC right now) [07:39] be really thankful if someone help me about this... [07:39] sanityx: Not that I know of, you can download and install from the alternate, text mode CD. === Olathe [n=Olathe@12-201-73-22.client.mchsi.com] has joined #ubuntu [07:39] yay dappers almost done [07:39] Jordan_U, you were so right, that seems to have worked. i am going to check my xorg.conf right now. === JoMaPa_ [n=josh@c-69-245-170-128.hsd1.in.comcast.net] has left #ubuntu ["Ex-Chat"] [07:40] tich_: :) [07:40] Jordan_U: bah! === Nuked [n=fluxinat@ool-44c7d376.dyn.optonline.net] has left #ubuntu [] [07:40] the xchat-gnome in edgy is buggy as hell, someone fix that one of these days =P === rBlong2us [n=eddie@pool-151-202-11-200.nycmny.east.verizon.net] has left #ubuntu [] [07:40] How do I set Swiftfox, rather than w3m, to be the default browser used by other applications ? [07:40] sanityx: BUT, we can try to get your graphics working in the liveCD. === han3 [i=hantu@60-241-200-159.static.tpgi.com.au] has joined #ubuntu === Yaakov [i=yaakov@capybara.nd.edu] has joined #ubuntu [07:40] Has anybody experienced X failing when booting ubuntu 6.10 on powerpc? [07:40] abes, what about /usr/ ? === chi0 [n=chi0@c-71-196-253-11.hsd1.co.comcast.net] has joined #ubuntu [07:41] Jordan_U: Well it says no screen found. Ideas? [07:41] sanityx: sudo dpkg-reconfigure xserver-xorg -phigh [07:41] can any one help me w/ my ati install [07:42] sanityx: (my solution to everything ) [07:42] i tried that without the flags. ill try it with them === Amaranth [n=travis@ubuntu/member/amaranth] has joined #ubuntu [07:42] sanityx: It just tells dpkg not to ask as many questions. === joeny [n=joeny@59.41.171.108] has joined #ubuntu [07:43] Jordan_U: Fatal Server Error: No Screens Found [07:43] hello [07:43] exit [07:44] sanityx: When you did the full dpkg-reconfigure, did you do what it says you might have to on PPC? ( I remember notes like that when I did it on my PPC machine ) [07:44] please any one i need help :( [07:44] I have a sub flash and have a icon on the desk and see the contents...how do I know the path to this to use in a cp command ? [07:44] might have to do? [07:44] i didnt notice it saying anything. ill look again [07:45] sanityx: It said PPC, I never really paid attention to it thogh. [07:45] alternatively does someone know how to run the file manager in sudo mode ? === iami89 [n=i_am_i89@222.252.195.132] has joined #ubuntu [07:45] river: sudo nautilus [07:45] nah doesnt say anything [07:45] river: gksudo nautilus [07:46] sanityx: Withought the -phigh ? === Matthai [n=Matthai@kovacic-m.fdv.uni-lj.si] has joined #ubuntu [07:46] how do i install openGL? [07:46] iami89: It should be installed by default. === defrysk [n=defrysk@g173059.upc-g.chello.nl] has joined #ubuntu [07:47] oh yeah it does say something like halfway through. ill tell you what it says. i remember not knowing how to do it though [07:47] iami89: opengl comes with video card drivers. what video card do you have? === muzik [n=nick@dsl-58-6-1-234.wa.westnet.com.au] has joined #ubuntu === rc-1 [n=whyso@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu [07:47] has anyone use projector via s-video before? === rc-1 [n=whyso@c-24-125-35-80.hsd1.va.comcast.net] has left #ubuntu [] [07:48] can any one help me w/ my ati card install [07:48] i have to put in the bus location. lets see if lcpci gives it to me [07:49] http://paste.ubuntu-nl.org/30715/ [07:49] chi0: i think there is no experty about xconf in this room. I am having same prob too [07:49] sanityx: Is it the comment about Busid ( I ran reconfigure on my intel machine ) [07:49] does anybody know how my grub configure should look like with this: http://paste.ubuntu-nl.org/30715/ === rc-1 [n=whyso@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu [07:49] that sucks === tw|sT3d [i=twist3r@202.175.230.35] has left #ubuntu [] === Jewfro-Macabbi [n=Jewfro-M@166.214.65.26] has joined #ubuntu [07:49] chi0, atis suck, i know, i got one to :( [07:50] strange, none of the buttons are working after i installed konversation (updates, system quit, etc) === MenZa [n=menza@0x50a116a8.kd4nxx12.adsl-dhcp.tele.dk] has joined #ubuntu [07:50] my card is ATI RADEON 7000 series [07:50] i got a stupid x1600 [07:50] I thought Ubuntu support was good. [07:50] where to get OpenGL in opengl.com? [07:50] I have a built in ati card b\c it cam w/ my note book :( [07:50] opengl.org [07:51] I was adding an aplet to my gnome panel, on now the panel is locked, can't access anything. Is there a config file I can wipe out to reset defaults? [07:51] NO programs, including terminal will start! help === MistaED [n=mistaed@87.212.233.220.exetel.com.au] has joined #ubuntu === Ecnassianer [n=ecna@cpe-76-168-247-163.socal.res.rr.com] has joined #ubuntu [07:53] Jordan_U: no luck man === pc3 [n=pc3@222.124.224.99] has joined #ubuntu === genbie [n=hathal@host86-144-89-98.range86-144.btcentralplus.com] has joined #ubuntu [07:53] rc-1: Can you start ( non GUI of course ) applications from a tty ( press ctrl+alt+F2 )? [07:53] rc-1: press alt+f7 to get back [07:53] sanityx: What kind of mac is it, or is it not a mac? [07:54] you can't send people to a tty without telling them how to get back :p [07:54] he just hard rebooted === genbie [n=hathal@host86-144-89-98.range86-144.btcentralplus.com] has joined #ubuntu [07:54] its a mac === atlas95 [n=atlas@AVelizy-152-1-72-38.w83-204.abo.wanadoo.fr] has joined #ubuntu [07:54] Vuen: Sorry, I should know better, sombody did that to me when I was new :( [07:54] dual 500Mhz PowerMac, so i guess that would make it a G3 [07:55] ati card [07:55] worked fine with 6.06 [07:55] hehe, yeah, someone did the same to me when i was new too :p [07:55] sanityx: Do you still have the xorg.conf from dapper? === sharksharp [n=sharksha@sina152-194.staff.sina.com.cn] has joined #ubuntu [07:55] hi again abes and pablo.. after i rebooted, the contents of e/tc/resolv.comf and /etc/ppp/resolv.conf reverted to the old namerserver ip! how can i change it to 4.2.2.1 permamnetly plz? [07:56] Jordan_U: I was thinking about that but I can't seem to get the hard drives mounted [07:56] alot of stuff worked in 6.06 but the kernal is jacked lol [07:56] Vuen: I am probably going to sleep soon, please give my apologies if he comes back. [07:56] Do I have to do something special to mount drives on a mac? [07:56] sure [07:56] now you have to hak shitt to get it working [07:56] Jordan_U: cfdisk reads the disks fine but they wont mount [07:56] mount -t auto /dev/hdb3 /media/ [07:57] oops [07:57] wrong window === zero742 [n=bret@12-214-0-94.client.mchsi.com] has joined #ubuntu [07:57] sanityx: I never had any problems. === astro [n=astro@ip68-106-204-107.pn.at.cox.net] has joined #ubuntu === Chippy [n=Ch1ppy@S0106000d88a35c46.du.shawcable.net] has joined #ubuntu [07:57] hello [07:57] have you had probs w/ DHCP? [07:57] any 1 [07:57] is there a forum for beryl specifically? [07:57] zero742: #beryl [07:57] thanks [07:57] np [07:57] ....kinda obvious I guess [07:58] hehe [07:58] zero742: #ubuntu-xgl also [07:58] so I was here last night, getting some help with getting my wireless running.. anyone avaliable to help me a bit more? i couldn't get it last night, ive done a few things but I cant figure out whats wrong. === dungodung [i=935b080a@wikipedia/dungodung] has joined #ubuntu === pc3 [n=pc3@222.124.224.99] has joined #ubuntu === bbt [i=sam@60-240-210-95.tpgi.com.au] has joined #ubuntu === rc-1 [n=whyso@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu === morgo [n=mtocker@ppp-124.120.183.173.revip2.asianet.co.th] has joined #ubuntu [07:59] sanityx: What is the command you used? from the right window :) [07:59] I have 3 machines on home network via wireless, would someone comment if it is practicle to consider having a common home ofor all machines/users on a 4th machine ? and if so, how ? [08:00] so, I have converted 2 partitions from ntfs to fat32 and edited /etc/fstab (changed ntfs into vfat), but when I restart, the partitions aren't mounted. what gives? === Mikes_ [n=michael@m41.net195-132-219.noos.fr] has joined #ubuntu [08:01] Jordan_U: mount -t ext3 /dev/hdb[1,2,3 etc] /media/ [08:01] river: you could have one machine be the server and set up the other three machines as thin clients. heh. [08:01] sanityx: You sure it is hdb and not hda ? [08:01] Jordan_U: wait i might have just got it [08:01] Jordan_U: yes, OSX is on hda [08:01] river: really though, the easiest way is just to set up some writeable samba shares on the 4th computer [08:01] basically my machine is recognizing my wireless card but im not able to search/find my wireless network, even when entering the SSID, etc. [08:01] Jordan_U: I just got it mounted [08:01] silly me [08:01] sanityx: And you are mounting it directly to /media === chris86wm [n=chris@user-0ceiabn.cable.mindspring.com] has joined #ubuntu [08:02] Jordan_U: Yeah, thats fine for now. === Android`` [n=Android_@81-179-97-11.dsl.pipex.com] has joined #ubuntu [08:02] Vuen, and would this be workable over a wireless which is a little flaky or slow at times ? [08:02] how to you install the ogg/theora plugin in totem? [08:02] do i have to dist-upgrade after installing nvida drivers/before installing beryl? [08:02] river: yep. it would work very well. samba's quite good at resuming connections, much better than windows' implementation [08:03] Jordan_U: of course x still failed to start . . . === pc6 [n=pc6@222.124.224.99] has joined #ubuntu [08:03] river: four of my roommates have windows xp, and two of us have ubuntu. three of us are on wireless. we all share files using windows file sharing / samba, and it's works flawlessly [08:03] /it's/it [08:03] sanityx: That makes sence with xorg 7 being so different I guess, but maybe you can find the correct busID. [08:04] Vuen, when a given machine is booting up and the wireless is down, what happens ? === kintaro0e [n=kintaro0@203.177.138.178] has joined #ubuntu === genbie [n=hathal@host86-144-89-98.range86-144.btcentralplus.com] has left #ubuntu ["Ex-Chat"] === santeria[FL] [n=infectio@ip24-170-193-114.ga.at.cox.net] has joined #ubuntu [08:04] so, can anyone please help me with my mounting problem? [08:04] river: you mean when the AP is down? hmm, not sure. you can configure how linux behaves in these cases, though i'm not really sure how [08:05] ok on dapper when i put it in it went to the splash screen, then after loading, it went to that vertical line screen but i heard what sounded like a start up little jingle [08:05] in KDE i have a "Wireless LAN Manager" program with some settings in it, it's probably in gnome as well [08:05] Jordan_U: lspci -x|grep ati shows 0001:11:02.0 [08:05] anyone? [08:05] so i did ctrl alt f2 and put in those nvidia commands [08:05] and it didnt crash [08:05] but it said it couldnt find the 3rd line [08:05] i think [08:05] Vuen, and is it likely to slow a session down if wireless is a little slow e.g. when application create temporary files or the like ? or when saving files [08:05] totem wont play ogg or theora files. is there anyway to fix this? === pradeep [i=pe@59.92.37.254] has left #ubuntu [] === basanta [n=basanta@202.79.37.177] has joined #ubuntu [08:06] says "there is no plugin to handle this movie" [08:06] river: well sure, i mean there's going to be some delays if you're moving gigantic files (movies, etc). but for saving files like word documents it will be totally transparent [08:06] dungodunug, if you describe your problem or a ask a more direct question, you are likely for someone to help === noxs [n=noxs@dslb-084-056-231-048.pools.arcor-ip.net] has joined #ubuntu [08:07] dungodung: pastebin.ca your fstab === hantu [i=hantu@60-241-200-159.static.tpgi.com.au] has joined #ubuntu [08:07] Vuen, thanks for your comments...and time...so how does one point all machines and users to the same home ? some trick in /etc/fstab on all machines or some symbolic link trick ? [08:08] anyone ? [08:08] if I were to buy a video game in Italy, would it differ from the same game if purchased in the UK ? [08:09] i just remembered on the splash screen an option was vga could i do anytihing in that menu that wouldnt give me the line problem [08:09] river: i actually have no idea how to mount home on a remote drive :(. mounting samba shares as arbitrary folders is easy, but home folders need to be mounted before you log in, so i don't really know. === reZo [n=reZo@124.197.45.143] has joined #ubuntu [08:10] river: you may need to post on the forums to explain in detail what you want. also, if you don't have any windows machines, you'll probably want to use something other than samba [08:10] AsheD: depends on the game. [08:10] Vuen: I'm not home right now [08:10] Vuen:: how about Unreal Anthology ? [08:10] anyone have any ideas? i thought dapper would work =\ === str0ng [n=strong@203.131.142.36] has joined #ubuntu [08:10] dungodung: oh. well, it's a bit difficult to help you if you don't have access to your computer >.< === pc3_ [n=pc3@222.124.224.99] has joined #ubuntu [08:10] i need help getting my wireless working :( === Pool_ [n=Drop@host10-214-static.188-82-b.business.telecomitalia.it] has joined #ubuntu [08:11] AsheD: mm, don't know. you'd have to search online for that [08:11] Vuen, yes all ubuntu boxes :-) how's that getting all the kids learning early :-) [08:11] Vuen:: I have been, I was looking for some personal testimonies as well [08:11] vuen: I can basically remember what settings I had [08:11] river: that's great :) === jStefan [n=edgy@48sdl30m49.codetel.net.do] has left #ubuntu ["Leaving"] === ecko [n=ecko@stargate.teklords.com] has joined #ubuntu === mrnotproper [n=mrnotpro@142-217-81-164.telebecinternet.net] has joined #ubuntu [08:12] is there any way to get Thunderbird to minimize to the tray like Gaim does in ubuntu? === harmental [n=ricardo@AGrenoble-257-1-26-139.w86-194.abo.wanadoo.fr] has joined #ubuntu [08:12] =( dapper drake doesnt work it keeps having thouse vertical lines :( [08:12] Vuen: do you know alot about getting wireless working in ubuntu? [08:12] Bah. [08:12] astro: no, sorry :(. i have an atheros wireless card, and madwifi is built natively in the kernel so i've never needed ndiswrapper === splintax [n=splintax@203-166-236-142.dyn.iinet.net.au] has joined #ubuntu [08:13] so i don't know how to set it up :( [08:13] damn :/ === Deaigo is now known as BoggsBeer [08:13] i have a POS built in one === pingar [n=saltvik@ti500720a080-5552.bb.online.no] has joined #ubuntu [08:13] that wont seem to fuckin work no matter what i do [08:13] astro: google the model of your wireless card with the word "ndiswrapper" [08:13] i did [08:13] and followed the directions there as well [08:13] no dice [08:13] does anyone know how to fix my problem where when ever i try to boot ubuntu from the livecd it shows these colored verticle lines? [08:13] i think possibly im doing something wrong, though === dani [n=dani@202.150.68.114] has joined #ubuntu === ketsugi [n=ketsugi@cm158.gamma230.maxonline.com.sg] has joined #ubuntu [08:15] brb [08:15] Vuen, how do i get the exact model of my card [08:15] i forgot how to do that === ayaa [n=fourat@196.203.53.221] has joined #ubuntu === bartzak [n=bartzak@CPE-124-183-53-49.nsw.bigpond.net.au] has joined #ubuntu === rc-1 [n=whyso@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu === MrPoopyPants [n=lkjlioij@ool-44c6a715.dyn.optonline.net] has joined #ubuntu === [1] wenko [n=wenko@142.232.8.200] has joined #ubuntu [08:16] rc-1: Jordan_U apologizes for sending you to a virtual terminal without telling you how to get back. When you press ctrl+alt+f2, to get back press alt+f7 [08:17] astro: in linux, i don't know. if you have windows dual-booted, you can just check there. === thombone [n=thombone@cpe-76-170-57-31.socal.res.rr.com] has joined #ubuntu [08:17] Vuen: thanks :) a restart fixed and OMFG BERYL IS SO AWESOME [08:17] hehe, yep [08:17] i've upgraded to edgy and since then i cant create folders with french characters ( ) [08:17] any ideas? [08:17] if you're running beryl, it's best not to go to virtual terminals === nixternal_ [n=nixterna@ubuntu/member/nixternal] has joined #ubuntu === angsty [n=wafn@202-151-69-186.dsl.teleguam.net] has joined #ubuntu [08:18] je viens de faire un upgrade edgy et je ne peut plus creer de dossiers avec de lettre du genre .... [08:18] because beryl has a bug where it sometimes hardlocks x when you try to get back to tty7 === sillyputtee [n=ascammon@adsl-71-134-250-208.dsl.pltn13.pacbell.net] has joined #ubuntu [08:18] !fr | harmental [08:18] harmental: Allez a #ubuntu-fr ou #kubuntu-fr pour de l'aide et de la discussion en francais. [08:18] just installed it now, and wow [08:18] so don't press ctrl+alt+f# while beryl is running [08:18] "Make sure the hostnames for your Windows and Linux partitons are different!" [08:18] hostname = "computer name" in windows, right? [08:18] how do i change my host name :/ === elbonzi [n=bonzi@pcp012346pcs.lass-whit.reshall.calpoly.edu] has joined #ubuntu [08:18] KenSentMe: i know sorry i clicked on the wrong channel...... [08:18] harmental, you know how to work with dead keys ? [08:18] harmental: no problem [08:19] nevermind, worked it out. [08:19] Hey all, any experts want to tell me why ndiswrapper freezes my computer? [08:19] my question stands however..... === angsty [n=wafn@202-151-69-186.dsl.teleguam.net] has joined #ubuntu === bartzak_ [n=bartzak@CPE-124-183-53-49.nsw.bigpond.net.au] has joined #ubuntu [08:19] defrysk: what? [08:19] rc-1: I had somebody do the same thing to me when I was new and I had to unplug the machine, I should have known better. === sillyputtee [n=ascammon@adsl-71-134-250-208.dsl.pltn13.pacbell.net] has left #ubuntu [] === bbt [i=sam@60-240-210-95.tpgi.com.au] has joined #ubuntu [08:19] elbonzi, because ndiswrapper is generaly crap === rc-1 [n=whyso@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu [08:19] harmental, us_intl [08:19] you know the term ? === FuelB [n=User@b122b.studby.ntnu.no] has joined #ubuntu [08:19] Mrpoopypants, how do i use my wireless card on edgy without it? === tw|sT3d [i=twist3r@203.167.66.172] has joined #ubuntu [08:20] crapola. [08:20] libgl1-mesa-dev has broken dependencies in edgy [08:20] defrysk: could u be more specific [08:20] ? [08:20] elbonzi, you've got the heck out of me, I dont even bother with wireless in linux === tw|sT3d [i=twist3r@203.167.66.172] has left #ubuntu [] === denver [n=denver@12.107.36.226] has joined #Ubuntu [08:20] after the debacle with ndiswrapper I dont even try [08:20] harmental, hut a key , then space to get the result like [08:21] broadcom 4318 [08:21] hmm === rc-1 [n=whyso@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu === iamlindoro [n=iamlindo@adsl-71-131-177-32.dsl.sntc01.pacbell.net] has joined #ubuntu [08:21] harmental, I guess you do not === pc3 [n=pc3@222.124.224.99] has joined #ubuntu [08:22] Hi all-- I have installed the openssh-server package on my ubuntu machine, but my attempt to connect to it still time out... is there a config file I am missing or something I am doing wrong? [08:22] one gripe though, konversation the connect menu wont go away === ke- [n=kenneth@port272.ds1-aboes.adsl.cybercity.dk] has joined #ubuntu [08:22] [08:22] iamlindoro: here it works out of the box, no config needed [08:23] iamlindoro: are you sure you use the right ip? [08:23] yep, and it pings just fine... just not ssh [08:23] defrysk: not following you.....i can type special characters....i can even see them in already created folders......but this error pops up when i try to copy or create a new folder with them.... [08:23] im using a french keyboard anyways [08:24] does it have a lot of meaty pastes made with internal organs? [08:24] is there any program that could generate my computer .vmx file automaticaly ? === Carnage\ [n=CarNagE@dslb-084-056-234-113.pools.arcor-ip.net] has joined #ubuntu [08:24] I couldnt believe how many gutpastes they call food over there [08:24] ifconfig on the ubuntu box shows eth0 with an ip of 192.168.1.99, and I try to ssh -l *loginname* 192.168.1.99 from another box on the same network and it times out [08:24] and it happens only when i try to do that on external drives.... [08:24] harmental, not sure about that prob but it sounds like a utf8 related prob === mackdieselx27 [n=jpalmeda@fullerton-cuda-2-70-37-82-183.lmdaca.adelphia.net] has joined #ubuntu === LordMetroid [n=lordmetr@h196n3c1o885.bredband.skanova.com] has joined #ubuntu [08:25] yes....i agree....but don know how to resolve it....is there any way to force ISO8859 when mounting external drives (automatically)? [08:25] harmental, add nls=utf8 to the drives concerned === pc3 [n=pc3@222.124.224.99] has joined #ubuntu [08:26] shouldnt i avoid UTF?? [08:26] harmental, in fstab in the options section [08:26] harmental, no you should use it === YogSothoth [n=john@lns-bzn-24-82-64-185-252.adsl.proxad.net] has joined #ubuntu === pc3 is now known as hendro^_^ === foolswisdom is now known as fool|Zzz === hendro^_^ is now known as edo^_^ [08:26] the problem is that im sharing files with a windows box.... [08:26] GRRR, I'm getting pissed off with dist-upgrading. I never get it working right :( === FuelB [n=User@b122b.studby.ntnu.no] has left #ubuntu ["Leaving"] [08:27] harmental, UTF8 IS THE WAY TO GO , JUST TRY IT [08:27] oops caps sorry === Decepticon [n=deceptic@dhcp142115.rogers.fsu.edu] has left #ubuntu [] [08:27] defrysk: so how can i set external drives....? [08:27] gksu "update-manager -c" asks password for ROOT, apt-get dist-upgrade x2 won't start upgrade (http://www.ubuntu.com/download/releasenotes/610) [08:28] i thought fstab was for interan drives only... [08:28] MM2: gksudo, not gksu [08:28] harmental how do you mount them when you want to use one ? [08:28] Vuen: docs says so... look at url [08:28] !vmx [08:28] Sorry, I don't know anything about vmx - try searching on http://bots.ubuntulinux.nl/factoids.cgi [08:28] !vmware [08:28] VMWare Player is in Ubuntu's !Multiverse repository. Instructions to install VMWare Server can be found at https://help.ubuntu.com/community/InstallingVMWare [08:28] MM2: try it with gksudo. [08:29] defrysk: ok...so what lines should i add?? === zero742 [n=bret@12-214-0-94.client.mchsi.com] has joined #ubuntu [08:29] nls=utf8 [08:29] as an option when you mount it === reazn [n=reazn@reazn.ozdsl.net] has joined #ubuntu [08:29] MM2: gksu asks for the root password, while gksudo asks you for your own password. unless you want to actually set a root password and activate the root account, gksu will never work. i really don't know why they put gksu there instead of gksudo === Tschaka [n=tschaka@p54B3916C.dip0.t-ipconnect.de] has joined #ubuntu [08:30] harmental, if its fat32 its just utf8 === youser [n=owner@67-58-196-205.amtelecom.net] has joined #ubuntu [08:30] defrysk: they are automatically mounted..... [08:30] harmental, is it fat32 or ntfs ? [08:30] ive tried ticking the utf option ...but the result was the same.... [08:31] Vuen: gksudo won't start update-manager :( [08:31] fat32 [08:31] MM2: that's really strange... [08:31] MM2: okay, well the reason apt-get isn't doing it is because you're probably still set on the dapper repos === rc-1 [n=whyso@c-24-125-35-80.hsd1.va.comcast.net] has left #ubuntu [] [08:31] MM2: sudo vi /etc/apt/sources.list [08:31] MM2: s/dapper/edgy/g [08:31] MM2: :wq [08:31] MM2: sudo apt-get update [08:31] then you can dist-upgrade twice. === croppa [n=stuart@135.27.233.220.exetel.com.au] has joined #ubuntu === reZo [n=reZo@124.197.45.143] has joined #ubuntu [08:32] harmental, its an utf8 issue if the drive is mentioned in fstab add utf8 in the options section and restart fstab then with sudo mount -a === nahkiss [i=nahkiss@dsl-hkigw7-fed8dc00-135.dhcp.inet.fi] has joined #ubuntu [08:33] harmental, if that does not work I do not know [08:33] wait!...my external drive is not on the fstab.... [08:33] Vuen: *sigh* there is breezy on repos... Maybe I should upgrade it first :P [08:33] harmental, usb drive ? [08:33] yes [08:34] MM2: oh. yeah, you can't go from breezy to dapper [08:34] err, you can't go from breezy to edgy [08:34] harmental, sorry not sure how to fix that [08:34] you have to breezy->dapper->edgy [08:34] Vuen: ty, sorry for troubles... I must then read how to upgrade breezy :/ [08:34] MM2: same thing, only in the sources.list, do s/breezy/dapper/g === pc3 [n=pc3@222.124.224.99] has joined #ubuntu [08:35] MM2: honestly though your system will probably be more stable if you just install edgy from scratch === siglite [n=siglite@62.49.91.251] has joined #ubuntu [08:35] i had a lot of problems upgrading from breezy to dapper, and a lot of people had problems upgrading from dapper to edgy === apomb [n=nairda@dsl-66-225-165-4.vianet.ca] has joined #ubuntu === Phyte [n=cthulhub@h-67-100-126-183.sttnwaho.dynamic.covad.net] has joined #ubuntu [08:36] especially if you've used tools like automatix, things are pretty much guaranteed to break === ke [n=kenneth@port272.ds1-aboes.adsl.cybercity.dk] has joined #ubuntu === kholerabbit [n=leni@dsl-124-148-114-192.qld.westnet.com.au] has joined #ubuntu [08:36] anyone around? [08:36] edgy is a fantastic release, especially when you get things like Beryl working. it's worth it to do it clean. === JoMaPa [n=JoMaPa@c-69-245-170-128.hsd1.in.comcast.net] has joined #ubuntu [08:36] apomb: yep [08:36] Vuen: I think that too, I haven't use this comps Ubuntu much, because USB kbd and mouse won't work an breezy [08:36] wow, that sucks [08:36] is edgy metacity compiled for 3d? (see: http://www.gnome.org/start/2.16/notes/en/rnfrontpage.html) [08:36] do they work in the edgy livecd? [08:37] i need help ... my CD/DVD R/W is not being detected :( [08:37] Vuen: I have not testet, I'll burn install CD and install and try === inuyasharenegade [i=UPP@c-68-81-7-199.hsd1.de.comcast.net] has joined #ubuntu [08:37] MM2: they will probably work in edgy. download the edgy cd, burn it and boot from it to see if your keyboard and mouse work === ompaul [n=ompaul@gnewsense/friend/ompaul] has joined #ubuntu [08:37] you don't need to install it to test it [08:37] Vuen: usb kbd and mouse works, if I plug in ps/2 mouse and kbd before boot [08:37] since dapper, the install cd and the livecd have been combined into one === han3 [i=hantu@60-241-200-159.static.tpgi.com.au] has joined #ubuntu [08:38] MM2: i have a usb mouse and no ps/2 mouse, and it works fine in dapper and edgy. i'm using it right now. [08:38] download the desktop cd for edgy and try it out [08:38] my dmesg doesnt even say any ATAPI devices are being loaded [08:38] Vuen: This is HP computer :P === sagitagirl [n=trias_sa@202.150.68.114] has joined #ubuntu === kholerabbit [n=leni@dsl-124-148-114-192.qld.westnet.com.au] has left #ubuntu [] [08:39] if you have a lot of stuff configured in dapper, you can easily backup all your config files: tar -cvzf etc.tar /etc/* === summat [n=proddage@home.fraggy.co.uk] has joined #ubuntu [08:41] i just did a fresh install of edgy, and it seems to have disabled ATA support :S === Cholito [n=alejandr@87.218.66.31] has joined #ubuntu === michael__ [n=michael@anakin.proxad.net] has joined #ubuntu === michael__ [n=michael@anakin.proxad.net] has joined #ubuntu === zero742 [n=bret@12-214-0-94.client.mchsi.com] has joined #ubuntu === P3L|C4N0 [n=gcamposm@200.121.86.9] has joined #ubuntu [08:44] hey can i get xmms to play wmas? === Staz [n=staz@IRC-MAFIA.net] has joined #UBUNTU [08:44] install the win32codecs [08:44] i have [08:44] Hi, what would you guys recommend for sfv checking/creating? === rc-1 [n=whyso@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu === ayaa [n=fourat@196.203.53.221] has joined #ubuntu [08:45] just installed beryl :) how do i show the cube, and flip it [08:45] hmmm ... im not very familiar with xmms, sorry youser [08:45] rc-1: ctrl+alt+left/right [08:45] or ctrl+alt+leftclickdrag [08:45] Staz: cksfv [08:45] thanks anyways [08:45] thanks Cas :) [08:46] anyone good with audacity? [08:46] so ... no one knows how to get edgy to detect a CD/DVD R/RW drive? === charle97 [n=c@udp007163uds.hawaiiantel.net] has left #ubuntu [] [08:47] control alt left/right doenst work === ender [n=Julian@gate.technotrend.de] has joined #ubuntu [08:47] rc-1: open beryl settings manager, and make sure the Desktop Cube and Cube Rotate plugins are checked [08:47] k brb === DarkED [n=darkedut@h460b8823.area7.spcsdns.net] has joined #ubuntu [08:48] yes they are [08:48] hmm [08:48] so, how is Edgy? [08:48] also, it only shows one desktop on lower right [08:48] and your windows are wobbly? [08:48] rc-1: are you using kde? === Hitman_Forhire [n=Hitman_F@74.130.90.59] has joined #ubuntu [08:48] yeah its definently on :) and nope just gnome [08:48] that's really strange. [08:48] try asking in #beryl [08:48] apomb: what do you mean by "detect"? It's no windows. Check you dmesg if you can find your drive === ubuntu_ [n=ubuntu@124.105.76.72] has joined #ubuntu [08:49] if i click on where the windows should be (on bottom right ) it does rotate tho [08:49] oh === astro [n=astro@ip68-106-204-107.pn.at.cox.net] has joined #ubuntu [08:49] then maybe the keys are just set up wrong [08:49] Cas, dmesg does not find it [08:49] Any faster checkers than cksfv? :) Taking its time. [08:49] sigh [08:49] apomb: also, don't you have a /dev/hdx [08:49] rc-1: try dragging a window over to the border of the screen. does it rotate [08:49] ? [08:49] yes, its /dev/hda [08:49] Vuen: yup :) [08:50] now my wireless card is not visible in system>admin>networking === arodle [n=arodle@12-219-45-156.client.mchsi.com] has joined #ubuntu === raphink [n=raphink@ubuntu/member/raphink] has joined #ubuntu [08:50] then the key settings are probably just wrong. you can set up what keys you want to rotate the cube under the Rotate Cube plugin [08:50] apomb: I'm sure there is ATA support in edgy, so it must be a bug or your hardware is broken [08:50] the error is: mount: special device /dev/hdc does not exist [08:50] ok, thanks [08:51] apomb: what about: hal-device | grep cdrom [08:51] a question: why cant I pull the channel list on freenode? [08:51] Cas, nothing happens :/ [08:51] says they are ctrl alt right/left [08:51] hmm. then i'm not sure [08:52] ask in #beryl or #beryl-dev [08:52] i cant figure this out at all :( [08:52] apomb: check if your hardware works (bootcd/windows) and file a bug on launchpad otherwise === nixternal [n=nixterna@ubuntu/member/nixternal] has joined #ubuntu === bobbie__4 [n=Bobbie@S01060050046f293e.vc.shawcable.net] has left #ubuntu ["I] === tacopon77 [n=tacopon7@softbank218128109115.bbtec.net] has joined #ubuntu [08:53] i'll check the connection of the cables... again. === method| [n=duane@67-43-242-30-cablemodem-roll.fidnet.com] has joined #ubuntu [08:53] before i updated, i was able to write, read (obviously) and everything.... === GNeu [n=Greg@static-203-87-39-30.vic.chariot.net.au] has joined #ubuntu [08:54] thanks anyway Cas === DarkED [n=darkedut@h460b8823.area7.spcsdns.net] has left #ubuntu [] [08:54] apomb: good luck [08:54] thanks === Staz [n=staz@IRC-MAFIA.net] has left #UBUNTU ["Leaving"] [08:55] ima try a reboot [08:55] ... cant hurt [08:55] damn i hate saying that === NewcomerXb [n=martin@c-68-52-187-205.hsd1.tn.comcast.net] has joined #ubuntu [08:56] !qemu [08:56] qemu is an emulator you can use to run another operating system - see https://help.ubuntu.com/community/WindowsXPUnderQemuHowTo [08:56] how does fsck work? [08:56] does it really wreck your files? === sF|Xemanth [n=kvirc@dsl-hkigw7-fe1af900-42.dhcp.inet.fi] has joined #ubuntu [08:57] Im just curious, can everyone hear me? === elkbuntu [n=melissa@ubuntu/member/elkbuntu] has joined #ubuntu [08:57] i have a problem, i have 350 mhz k6-2 comp, which has ram 256+32, should i chooce ubuntu or xubuntu for it [08:57] NewcomerXb: no [08:57] ;) [08:58] lol thanks. I havent been replied to much tonight ;) [08:58] at all actually === Metal_Militia [n=ioppo@host-84-222-34-186.cust-adsl.tiscali.it] has joined #ubuntu [08:58] hmmm no help in #beryl [08:58] i have atm xubuntu dapper in it, i'm planning to update it to edgy, but its go* da*n slow === sagitagirl [n=trias_el@202.150.68.114] has joined #ubuntu [08:58] I dont get help in the forum either. I must ask bizarre question :< === inu|sleep [i=UPP@c-68-81-7-199.hsd1.de.comcast.net] has joined #ubuntu === reZo [n=reZo@124.197.45.143] has joined #ubuntu [08:59] s === satempler [n=satemple@ip68-230-166-108.mc.at.cox.net] has joined #ubuntu === inu|sleep is now known as inuyasharenegade === Majic [n=Majic@adsl-68-127-238-160.dsl.pltn13.pacbell.net] has joined #ubuntu [09:00] well. i guess i may as well head out. No one knows how to use fsck? === pc6 [n=pc6@222.124.224.99] has joined #ubuntu === Egusgib [n=Egusgib@S0106001346f43273.vc.shawcable.net] has joined #ubuntu === splintax [n=splintax@203-166-236-142.dyn.iinet.net.au] has joined #ubuntu === vintle [n=vintle@rrcs-67-52-84-178.west.biz.rr.com] has joined #ubuntu === mostafa_as3ad [n=mostafa@82.201.236.68] has joined #ubuntu === hybrid_ [n=x@72.169.30.254] has joined #ubuntu === NewcomerXb [n=martin@c-68-52-187-205.hsd1.tn.comcast.net] has left #ubuntu [] === ChaKy [n=chaky@0-59.dsl.iskon.hr] has joined #ubuntu === satempler [n=satemple@ip68-230-166-108.mc.at.cox.net] has joined #ubuntu [09:01] hey all [09:01] NewcomerXb: Sorry, I'm on my way to bed (3AM), but you can read up on the man page if nobody answers soon; I don't know how it works internally, but it looks for some sort of markers about the file system to see if everything is as it should be, and tries to fix it if not. === matason [n=matason@82-70-148-150.dsl.in-addr.zen.co.uk] has joined #ubuntu [09:01] i have a problem: i'm now trying to run VMWare in ubuntu, and use it to boot up my windows partition within ubuntu. but as i'm configuring the virtual machine, when i go to specify the disk/partition to boot this VM from, i get "Failed to load partitions for device /dev/sda: Permission denied" === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu === astro [n=astro@ip68-106-204-107.pn.at.cox.net] has joined #ubuntu [09:02] fucking pos :/ [09:02] !language | astro [09:02] astro: Please watch your language and keep this channel family friendly. [09:02] sorry === pc6 is now known as cew [09:02] im having a very hard time here i dont know what else to do :/ [09:02] hai ;) [09:03] umm i dont know much about vmware but did you enable root? [09:03] any know any way to help me get wireless setup here on my laptop [09:03] vintle: what do you mean? am i running vmware as root? === jordo2323 [n=jordo23@CPE-70-94-37-97.wi.res.rr.com] has joined #ubuntu [09:03] astro: Have you seen the online docs yet? [09:03] yes === rpedro [n=rpedro@87-196-76-177.net.novis.pt] has joined #ubuntu [09:04] I am trying to install Nvidia drivers and it says to kill xwindows.....how? [09:04] i googled the wireless card ubuntu and ndiswrapper too [09:04] didn't work [09:04] astro: If none of that sheds any light, maybe try the mailing list. More eyes will see ie. [09:04] :( === xenon_ [n=xenon@S0106000f3d36c7a3.vc.shawcable.net] has joined #ubuntu [09:04] splintax: If permission was denied maybe if you tried to run it as root [09:04] the thing im having a problem with now is that I did the steps, but not my wireless card is not under Networks [09:04] er Network [09:05] i have the wired one and the modem, but the wireless has vanished [09:05] vintle: okay, i'll try that. how do i edit the launchers in the Applications menu? === pc3 [n=pc3@222.124.224.99] has joined #ubuntu [09:05] Anyone know how to boot Ubuntu into a command line and not into xwindows? [09:05] jordo2323: Once, or all the time? [09:05] tony: just once to install my nvidia drivers [09:05] That Im not sure of but I know when there is a permission denied error it may be because the user acct your using isnt privileged enough. [09:05] jordo2323: sudo init 1 will drop you into the command line [09:06] tonyyarusso: would you know how to get my wireless card back into the Networks portion under administration? [09:06] vintle: yes but i'd like to run vmware while logged into my normal account. so i'll probably need to edit the launcher to run as superuser. [09:06] yup [09:06] jordo2323: You could use the "recovery mode" from grub, which will give you a root command prompt. [09:06] Nvidia guy have you tried using automatix? [09:06] I'll try.....brb [09:07] astro: My wireless worked ootb, so no. [09:07] vintle: what IRC client are you using? it may be useful to get one with tab autocompletion so that you can prefix messages with people's names. [09:07] :( [09:07] vintle: that way they're more likely to see what you're saying. === Volstrup [n=volstrup@0x5552fb8d.adsl.cybercity.dk] has joined #ubuntu [09:07] YEa right now im usung xchat and im new to it ... === bronson [n=bronson@adsl-64-161-106-11.dsl.snfc21.pacbell.net] has joined #ubuntu [09:08] vintle: I'm using Xchat as well. Just start typing someone's name and hit Tab, it should complete the name for you then you can type the rest of your message. === idontknow [n=harshul@c58-107-78-152.blktn1.nsw.optusnet.com.au] has joined #ubuntu [09:08] vintle: see how it highlights messages when i prefix them with your name? === Mantice [n=richard@125-236-172-117.broadband-telecom.global-gateway.net.nz] has joined #ubuntu [09:09] I foolishy thought that the ubuntu distribution upgrade was small and Now I cant exit it, what happens if I push the powerbutton or shutdown while its downloading packages ? === eno is now known as eno-zzz === mrnotproper [n=mrnotpro@142-217-81-164.telebecinternet.net] has joined #ubuntu [09:10] jordo2323: Have you tried automatix? === Vaske_Car [n=durad@d57-59-78.home.cgocable.net] has joined #ubuntu [09:10] !automatrix [09:10] Sorry, I don't know anything about automatrix - try searching on http://bots.ubuntulinux.nl/factoids.cgi [09:10] what I need to be able to watch videos on MetacafeDOTcom [09:10] !automatix [09:10] automatix is a script that tries to install some software, and often fails and breaks systems. We don't provide support for it, and we strongly discourage its use. === method| [n=duane@67-43-242-30-cablemodem-roll.fidnet.com] has left #ubuntu ["Konversation] [09:11] !automatrix bcm4318 [09:11] Sorry, I don't know anything about automatrix bcm4318 - try searching on http://bots.ubuntulinux.nl/factoids.cgi [09:11] er [09:11] !bcm4318 [09:11] Sorry, I don't know anything about bcm4318 - try searching on http://bots.ubuntulinux.nl/factoids.cgi [09:11] blah. [09:11] Any one know the awnser to my question ? === Whatsisname [n=whatsisn@c-75-72-177-215.hsd1.mn.comcast.net] has joined #ubuntu === jordo2323 [n=jordo23@CPE-70-94-37-97.wi.res.rr.com] has joined #ubuntu === lebsnose [n=chatzill@81-174-9-7.f5.ngi.it] has joined #ubuntu === abes_ [n=abes@rn-v1w2a13.uwaterloo.ca] has joined #ubuntu [09:12] tony: the install script would run but I wasn't in the right run level to install the driver.... [09:12] !shutdownwhiledistributionupgrade [09:12] Anyone know how to boot Ubuntu into a command line or kill xwindows? [09:12] Sorry, I don't know anything about shutdownwhiledistributionupgrade - try searching on http://bots.ubuntulinux.nl/factoids.cgi === rem [n=rem@bas-flu-adsl-dynip-214-219.vtx.ch] has joined #ubuntu [09:12] Dam ! [09:12] lol [09:13] Any one of you humens know z/ [09:13] ? [09:13] Id click the X button but their is no button and I dont know if shutting down my computer will kill every thing. [09:14] jordo2323: 'sudo invoke-rc.d gdm stop' will kill X === magical_trevsky [n=magical@80-45-41-53.static.dsl.as9105.com] has joined #ubuntu === gunne [n=gunne@81-232-134-52-no22.tbcn.telia.com] has joined #ubuntu [09:14] jordo2323: You have to be in a particular runlevel to install it? ....why? [09:14] anyone got their mic to work on a sblive? === traskbtrojanek [n=traskbtr@75.72.133.63] has joined #ubuntu === JoMaPa [n=JoMaPa@c-69-245-170-128.hsd1.in.comcast.net] has left #ubuntu [] === Sputn1ck [n=wam@unaffiliated/sputnick] has joined #ubuntu === abes__ [n=abes@rn-v1w2a13.uwaterloo.ca] has joined #ubuntu [09:17] tonyyarusso: Not sure.....it just warns me that I am in runlevel 1 in the install script when booting into recovery mode.....I can continue to install, but I was afraid to do that.... === boky [n=boky@194.247.194.14] has joined #ubuntu [09:17] jordo2323: Huh. Don't know the script, so can't explain that. I gotta get to bed though; good luck. [09:17] thanks === Egusgib [n=Egusgib@S0106001346f43273.vc.shawcable.net] has left #ubuntu [] === bean_ [n=bean@hssml0189.pc.nus.edu.sg] has joined #ubuntu [09:18] Oh my god my ubuntu's firefox is broken its not playing YouTube video !! === rich_ [n=rich@pool-71-101-108-49.tampfl.dsl-w.verizon.net] has joined #ubuntu [09:19] Oh wait their it goes. === mlpug [n=user@a84-231-238-186.elisa-laajakaista.fi] has joined #ubuntu [09:19] The sounds gone !! [09:19] Why cant it just work :( [09:20] hi, i'm running edgy. just wondering is it safe to install java plugin via firefox's built-in pluginfinder service or should i install it via apt? === another [n=another@125.22.149.49] has joined #ubuntu === another [n=another@125.22.149.49] has left #ubuntu ["...] === another [n=another@125.22.149.49] has joined #ubuntu === abes___ [n=abes@rn-v1w2a13.uwaterloo.ca] has joined #ubuntu === d33p__ [n=d33p@87.217.145.98] has joined #ubuntu [09:22] bean_, install it via apt is best [09:22] DarkMageZ: ok thanks [09:23] DarkMageZ: btw, do u know what's the difference between blackdown's and sun's java? === ChaKy [n=chaky@0-59.dsl.iskon.hr] has joined #ubuntu [09:23] !vmware [09:23] VMWare Player is in Ubuntu's !Multiverse repository. Instructions to install VMWare Server can be found at https://help.ubuntu.com/community/InstallingVMWare === rem__ [n=rem@bas-flu-adsl-dynip-214-219.vtx.ch] has joined #ubuntu [09:23] !Metaverse [09:23] Sorry, I don't know anything about Metaverse - try searching on http://bots.ubuntulinux.nl/factoids.cgi [09:23] how do i make keyboard shortcuts to start apps? [09:24] bean_, not exactly, but people have less problems with sun's java === dwa [n=dwa@garrut.xs4all.nl] has joined #ubuntu [09:24] Dark_Bahamut, ok so your recommendation is sun's java? === splintax [n=splintax@203-166-236-142.dyn.iinet.net.au] has joined #ubuntu === Fjodor [n=sune@daimi-pat.daimi.au.dk] has joined #ubuntu [09:25] i'd seted firewall, but i can't go to the internet from LAN when I'm using static IP address? === Gnewf [n=Gnewf@GroupMackenzie.s11-1-0-16-0.ar3.SEA1.gblx.net] has joined #ubuntu === Commander|movie [n=thomas@dialup-4.246.216.189.Dial1.SanJose1.Level3.net] has joined #ubuntu [09:26] does someone know how i can approuch to internet from LAN only when i'm using DHCP address on LAN? === Nakkel [n=nakkel@vektori.com] has joined #ubuntu === michiel_ [n=michiel@80.112.194.210] has joined #ubuntu [09:26] DarkMageZ, thanks [09:26] hoe do you turn on DMA? [09:26] !dma [09:26] dma is Direct Memory Access/Addressing. It makes hard disks & optical drives transfer data faster, and is almost always enabled in Ubuntu 6.06. For more info see https://help.ubuntu.com/community/DMA [09:26] how* === Commander|movie [n=thomas@dialup-4.246.216.189.Dial1.SanJose1.Level3.net] has left #ubuntu ["Leaving"] [09:27] bean_, yeah, i'm recommending sun's java. everyone seems to write their apps against it === soggylappy [n=soggy@203-118-179-218.bliink.ihug.co.nz] has joined #ubuntu [09:27] DarkMageZ, ok thanks [09:28] hello, I have some devices running in RAID 1 with dmraid, but because dmraid is causing system crashes, I want to remove it. [09:29] can I safetly remove it with apt-get? [09:29] and change fstab ofcourse === frandavid100 [n=david@81-203-208-52.user.ono.com] has joined #ubuntu [09:30] because dmraid is giving me a lot of troubles now === hantu [i=hantu@60-241-200-159.static.tpgi.com.au] has joined #ubuntu [09:30] please, I need some help [09:31] when I call the shutdown menu it doesn't darken the screen and behaves like a normal window === mikeymike-linux_ [n=mikeymik@ip70-179-218-46.dl.dl.cox.net] has joined #ubuntu [09:31] i'm using edgy on an acer 3012 laptop and my synaptics touchpad can't be used to drag windows.. can anyone help me? [09:31] i accidentally killed vino from ssh and i want to restart it [09:31] its saying i cant open the display === Admiral_Chicago [n=freddy@66.99.72.2] has joined #ubuntu [09:31] how do i do this? === Fanskapet [n=tommy@81-233-197-124-no88.tbcn.telia.com] has joined #ubuntu [09:31] happens even after reinstalling the system, and doesn't happen to other users === Exposure` [n=exposure@145.76.18.61] has joined #ubuntu [09:31] this was the command to start vino /usr/lib/vino/vino-server --oaf-activate-iid=OAFIID:GNOME_RemoteDesktopServer --oaf-ior-fd=17 [09:31] can ANYONE tell me how to restart it remotely [09:31] so I think it has to do with my personal settings [09:32] no one? [09:32] ARGH [09:33] how can i create a launcher to launch vmware -l as superuser? [09:33] i've been trying echo password | sudo -S vmware -l but no dice [09:33] mikeymike-linux_: can't you just reboot your server === Kishore [n=kishore@202.133.61.16] has joined #ubuntu [09:34] splintax, i dont want to [09:34] there's no way to do this? [09:34] cant i tell it to open [09:34] somehow? === alejandro_ [n=alejandr@87.218.66.37] has joined #ubuntu [09:34] mikeymike-linux_: i don't know anything about vino so there probably is a way [09:34] man vino-server yields a bunch of crap [09:34] is there a support IRC channel for vino? maybe try joining that [09:34] havent found one === idontknow [n=harshul@c58-107-78-152.blktn1.nsw.optusnet.com.au] has joined #ubuntu === furesta [n=sandrom@212.21.195.237] has joined #ubuntu [09:35] ive tried #beryl and no help :( keyboard shortcuts not workign help! [09:36] if anyone knows how to restart vino remotely please tell me === tobias [n=tobias@dslb-084-063-014-003.pools.arcor-ip.net] has joined #ubuntu [09:38] hi! how can I set a username when connecting to an ssh-webserver with Nautilus? It only asks my password & of course registration fails then... === callas` [n=callas@host86-130-51-129.range86-130.btcentralplus.com] has joined #ubuntu === jack_wyt_ [n=jack@61.149.2.234] has joined #ubuntu === atla [n=atla@sky114.wolke7.fh-mannheim.de] has joined #ubuntu === yeager [n=yeager@81-232-79-220-no46.business.telia.com] has joined #ubuntu === lorenzod [n=lorenzod@80.87.77.58] has joined #ubuntu === jokoon [i=JokooN@180.193.103-84.rev.gaoland.net] has joined #ubuntu === another [n=another@125.22.149.49] has left #ubuntu ["...] [09:41] anyone could help with vmware? [09:42] (not me sorry) === BlueDevil [n=mircea@86.122.9.2] has joined #ubuntu === engla [n=ulrik@kr-lun-116-144-233-83.3.cust.bredband2.com] has joined #ubuntu [09:43] what's your problem ?ask the google. it has specification about install it. and the problem in install. === adwait [n=adwait@59.182.18.143] has joined #ubuntu === igorzolnikov [n=Igor@85-21-157-99.static.corbina.ru] has joined #ubuntu [09:44] ... === igorzolnikov [n=Igor@85-21-157-99.static.corbina.ru] has joined #ubuntu === igorzolnikov [n=Igor@85-21-157-99.static.corbina.ru] has left #ubuntu ["Ex-Chat"] [09:45] mzli: i've installed it.. i've try all possible ways to create a perfect .vmx file.. but everytime i run the program, it won't detect my cdrom.. and error unable to boot [09:45] and perhaps.. i've read wiki and google.. === Pensa`TV [n=pensacol@196.116-242-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu === astro [n=astro@ip68-106-204-107.pn.at.cox.net] has joined #ubuntu === timfrost [n=timfrost@125-237-80-168.jetstream.xtra.co.nz] has joined #ubuntu [09:46] qume also can do it. === Shoo-Shu [n=shoo@58.179.77.119] has joined #ubuntu === olopez [n=olopez@87.219.128.59] has joined #ubuntu [09:47] ubotu what is a gimp ? === Burgundavia [n=corey@ubuntu/member/burgundavia] has joined #ubuntu [09:48] hi , why ubuntu install by default cherokee with root perms instead www-data ? [09:48] gnu image manipulation package [09:48] /program [09:48] i accidentally killed vino from ssh and i want to restart it remotely [09:48] i get 'cannot open display' errors [09:48] how do i do this? [09:48] mzli.. i have install qemu from synaptic..but how can i run it? [09:48] olopez: likely a bug. I suggest you file one === jaaroo [n=jaro@x53.mykey.cz] has joined #ubuntu [09:49] qemu-img create xp.img 5G === Daverocks [n=me@143.238.94.97] has joined #ubuntu [09:49] qemu -hda xp.img -cdrom /dev/cdrom -boot d === wiscalico [n=je@130.226.136.2] has joined #ubuntu === hoelk [n=hoelk@h081217035104.dyn.cm.kabsi.at] has joined #ubuntu [09:49] Darn, edgys liveCD did not regocnized my usb kbd or mouse, and lang setting are all wrong [09:49] qemu -hda xp.img [09:50] Burgundavia: is these bug reported ? === timfrost [n=timfrost@125-237-80-168.jetstream.xtra.co.nz] has left #ubuntu [] [09:50] Arepie>just this 3 orders. [09:50] so if I Install it, will my usb kbd or mouse work [09:50] How can I restore my cherokee perms with gnu vino instead of forwarding ssh throught synaptic, can't /dev/gnu just work with it ? === gord [n=gord@81-178-84-235.dsl.pipex.com] has joined #ubuntu [09:50] olopez: not certain. I would check launchpad === marcin_ant [n=marcin@194.114.146.126] has joined #ubuntu [09:52] ok === jc-denton [n=nils@ztnw648.ztl.ch] has joined #ubuntu [09:52] hi [09:52] how can i compile a module for the kernel shipped with ubuntu edgy? === gflash [n=gflash@dslb-084-060-187-153.pools.arcor-ip.net] has joined #ubuntu === hollywoodstar [n=a@c83-253-88-162.bredband.comhem.se] has joined #ubuntu === ekimus [n=mmarcher@v009.demo.tuwien.ac.at] has joined #ubuntu [09:53] i accidentally killed vino from ssh and i want to restart it remotely [09:53] i get 'cannot open display' errors [09:53] how do i do this? === dorto [n=dorto@220.226.151.89] has joined #ubuntu [09:54] i just tried to build a hello world module, but no success so far [09:55] these two wireless usb network cards are available at the shop: D-Link DWL G122 && Linksys WUSB54G. [09:55] which one should I take for better support on ubuntu? === ghyE_15ceW [n=pc7@222.124.224.99] has joined #ubuntu === pc3 [n=pc3@222.124.224.99] has joined #ubuntu === gflash [n=gflash@dslb-084-060-187-153.pools.arcor-ip.net] has left #ubuntu ["Kopete] === udomsak_ [n=udomsak@203.154.157.253] has joined #ubuntu [09:56] hi all === wolki [n=wolki@client418.sg.fr.studentenwohnheim-bw.de] has joined #ubuntu [09:56] * udomsak Who's experte in Gnome or Linux sound system ? [09:56] I have problem with AC97 on Dapper ? [09:56] I have problem with AC97 on Dapper === noelvis [n=noelvis@dsl-241-186-124.telkomadsl.co.za] has joined #ubuntu [09:58] how i can see my ubuntu version , something like /etc/debian_version [09:58] ? === spook [n=spook@12-215-82-157.client.mchsi.com] has joined #ubuntu [09:59] Hi there [09:59] hello === vincent__ [n=vincent@195.146.210.38] has joined #ubuntu [09:59] to be honest === cpjr2898 [n=cpjr2898@l3.cip.ei.uni-stuttgart.de] has joined #ubuntu [09:59] Can anyone point me to the help files on Adept [09:59] i don't really have to an idea how to build it [09:59] olopez, cat /etc/apt/sources.list | grep edgy | head -n 1 [09:59] substitue edgy with dapper etc if that is what you want === satempler [n=satemple@ip68-230-166-108.mc.at.cox.net] has joined #ubuntu [10:00] but according to the kernel documentation make -C M=`pwd` should be enough === ben10 [n=ben10@82-171-41-26.dsl.ip.tiscali.nl] has joined #ubuntu [10:00] ok dorto y do finally cat /etc/issue ;) [10:00] I have some icon and it appears to be in 32bits, and I want to convert it in 24bits keeping the alpha channels, is it -possible- ? (... to do with gimp for example) [10:00] can i use the kernel-headers as ? [10:00] Or 16bits === MikeDK [n=michael@27-255-173-213.static.dsl.webpartner.net] has joined #ubuntu === waysted [n=1000@billfernie.plus.com] has joined #ubuntu [10:01] never heard about /etc/issue [10:01] Burgundavia: It wasn't like bug , i submit it [10:02] but that's what i get [10:02] make: *** arch/i386/boot: No such file or directory. Stop. [10:02] dorto: issue - pre-login message and identification file ;) === reZo [n=reZo@124.197.45.143] has joined #ubuntu === crsd [n=yuri@proxy.irbis.net.ru] has joined #ubuntu === Anev [n=anevseev@vlksm.mv.ru] has joined #ubuntu === Metal_Militia [n=ioppo@host-84-222-34-186.cust-adsl.tiscali.it] has joined #ubuntu [10:04] ;; [10:04] Anyone? [10:04] maybe i need to ask different === g1gaman [n=g1@81.198.29.207] has joined #ubuntu [10:04] how can i compile this example on edgy: http://tldp.org/LDP/lkmpg/2.6/html/x121.html ? === zerosmoke [n=zerosmok@200.38.248.230] has joined #ubuntu === rexbinary [n=rexbinar@unaffiliated/rexbinary] has joined #ubuntu [10:05] j === jordo2323 [n=jordo23@CPE-70-94-37-97.wi.res.rr.com] has joined #ubuntu === aldin [n=aldin@as54-ma1.dlp263.bih.net.ba] has joined #ubuntu [10:05] Why would Azureus not start if I installed Sun's Java and the Azureus package? === noelvis [n=noelvis@dsl-241-186-124.telkomadsl.co.za] has left #ubuntu ["Kopete] [10:06] because java is set to something else then suns java [10:06] ? [10:06] jc-denton: How do I update that? === delari [i=delariah@r220-101-55-224.cpe.unwired.net.au] has joined #ubuntu [10:06] I thought I already did with use-alternatives.... [10:06] sudo update-alternatives --config java [10:06] hey [10:06] does anyone here use firefo [10:06] x [10:06] then it must work [10:07] delari: yes ;) [10:07] jc-denton: I already did that and it shows set to #2 Sun's java [10:07] have u seen this site? :O [10:07] delari, yes [10:07] http://www.msfirefox.com [10:07] When I select Azureus under the menu option nothing happens... === bun-bun [n=bun@unaffiliated/bun-bun] has joined #ubuntu [10:08] jc-denton: Do I have to restart after this change? [10:08] hi, i need LAMP, is there ubuntu CD 4download which has this packages [10:08] gentlemen, can anybody help me to set keyboard shortcuts in ubuntu (e.g. open nautilus with winkey+E) [10:09] are you using a windows keyboard [10:09] aldin, You mean Linux, Apache, MySQL and PHP? [10:09] jordo2323: you mean reboot? no [10:10] jc-denton: Yeah....didn't think so.....any ideas? === s [i=s@r220-101-55-224.cpe.unwired.net.au] has joined #ubuntu [10:10] no it's supposed to work now [10:10] java apps work w/o problemes for me on edgy [10:10] I get an error message when running from command line......can I pastebin to you? [10:10] aldin, you can download and install them over internet from Synaptic package manager [10:10] instead of downloading a CD [10:11] or get Ubuntu Server [10:11] finally got my motorola wireless pc card working on edgy [10:11] is this joke msfirefox.com [10:11] aldin, yes, joke, what else? [10:11] who are the main ubuntu experts online now? === msfirefox [i=msfirefo@r220-101-55-224.cpe.unwired.net.au] has joined #ubuntu [10:12] jc-denton: http://ubuntu.pastebin.com/820291 [10:12] why is my vino-server man pages messed up? and how do i fix it? [10:12] its quite a hoot === Sby_Fitnes_Diran [n=pc1@222.124.224.99] has joined #ubuntu === msfirefox-com [i=msfirefo@r220-101-55-224.cpe.unwired.net.au] has joined #ubuntu [10:12] looks like an swt problem [10:12] gentlemen, can anybody help me to set keyboard shortcuts in ubuntu (e.g. open nautilus with winkey+E) [10:12] sry i really don't know [10:13] sorry for abuse [10:13] g1gaman: have you checked google? [10:13] theres heaps of tutorials === rc-1 [n=whyso@c-24-125-35-80.hsd1.va.comcast.net] has left #ubuntu [] [10:13] Does anyone here run Nvidia GPU's under ubuntu? [10:13] windows keys and capslock doesnt should not be on a keyboard. [10:13] msfirefox-com: yes, but i cant get the helpful result [10:13] jordo2323: yeah === cari_sohib_ce [n=pc2@222.124.224.99] has joined #ubuntu === phaero [n=phaero@h73n2fls31o891.telia.com] has joined #ubuntu === SilentDis [n=alex@wdwi0pool0-a244.wi.tds.net] has joined #ubuntu [10:14] Cromag: so, what is your shortcut to home folder? [10:14] hello :) [10:14] Daverocks: Is there a driver management menu like in windows if I installed the driver? [10:15] jordo2323: there's "nvidia-settings" which is similar to the one in the windows nvidia drivers, but i don't think it's particularly helpful [10:15] How do I control the cards outputs then? [10:15] tell me, [10:15] are there any beginners using Ubuntu [10:15] Cromag: and capslock is very helpful in editing text, when titles should be uppercase [10:15] I have my 6800 hooked into my TV through Svideo... [10:16] no idea of linux whatsoever etc === ghyE_15ceW [n=pc7@222.124.224.99] has joined #ubuntu [10:16] msfirefox-com: consider me as one === brixz [n=brixz@83.95.6.247] has joined #ubuntu [10:16] jordo2323: nvidia-settings is probably your best bet for effects and ways to display etc, but if it concerns multiple displays and display control, then that's just X configuration [10:17] capslock should go away. Shift button is there. [10:17] not truely a tech support question... more of a search for a tool to help me. I am looking for a tool that allows me to batch convert a number of audio files through lame, hopefully reading out the mp3 tags first, and passing them to the new file. anyone herd of such a tool? (not grip, it seems to just work if it's coming from CD audio, unless I'm missing something) === d33p__ is now known as luisbg === brixz_ [n=brixz@83.95.6.247] has joined #ubuntu [10:17] is there a linux equivalent of raid? === skypa [n=skypa@e178198195.adsl.alicedsl.de] has joined #ubuntu [10:17] how to copy the text from "Details" box in "Changes Applied" window in Synaptic manager? === RvGaTe [n=rvgate-f@g178204.upc-g.chello.nl] has joined #ubuntu [10:18] Cromag: are you typing uppercase with only one hand? [10:18] C-c, C-S-c, right click, nothing are working [10:18] got ants crawling on my desk === brixz_ [n=brixz@83.95.6.247] has left #ubuntu ["Leaving"] [10:18] lol [10:18] got women crawling on me === SilentDis goes to msfirefox-com's house [10:19] *rolleyes [10:19] rofl === pc3 [n=pc3@222.124.224.99] has joined #ubuntu [10:19] If I just installed Ubuntu to a blank system, how can I partition the rest of my hard drive for windows? [10:19] g1gaman: yes ? [10:19] jordo2323: click 'Next' [10:19] jordo2323: you have unpartitioned space? === Sby_Fitnes_Diran [n=pc1@222.124.224.99] has joined #ubuntu [10:19] jordo2323: it's easiest to install windows first [10:20] jordo2323: i agree with Daverocks. but, having said that, it's not impossible. [10:20] Cromag: you found that style smart? === Igd [n=Igd__@80-192-82-234.cable.ubr02.edin.blueyonder.co.uk] has joined #ubuntu [10:21] for me yes [10:21] Daverocks: When I install Windows first do I partition the linux part there or in Ubuntu's installer? === cain_ [n=cain@196.44.1.98] has joined #ubuntu [10:22] why not just switch all the way over to linux? === user-land2 [n=user-lan@217-162-168-80.dclient.hispeed.ch] has joined #ubuntu [10:22] jordo2323: you wouldn't partition it from windows. you'd finish installing windows, then i'd use something like gparted to resize your windows partition, or you could do it from the ubuntu installer === Fergy [n=Fergy@a82-92-232-156.adsl.xs4all.nl] has joined #ubuntu [10:23] jordo2323: I installed as follows: WinXP, gave it 20gb of the drive. then installed ubuntu, gave it the remaining 90gb. during the linux install, setup the 2nd drive with [5gb swap] [25gb /media/ostransfer as vfat] [200gb /home ext3] [10:23] Daverocks: Yeah....thats kind of what I thought.....I have a 75 GB drive......what partitions do I need? === Arcad3 [i=Arcad3@81.196.174.67] has joined #ubuntu === lawler [n=mpe@ppp15-83.adsl.forthnet.gr] has joined #ubuntu [10:24] zerosmoke: i have been asking myself that question as of late. i haven't booted my windows partition in nearly 2 months lol === sunduk [n=sunduk@leased-line-224-66.telecom.by] has joined #ubuntu [10:25] jordo2323: depends how much space you want for windows, and how much you want for linux [10:25] may i ask === user-land2 is now known as user-land [10:25] why the switch to Ubuntu === _RvGaTe [n=rvgate-f@g178204.upc-g.chello.nl] has joined #ubuntu [10:25] what made you change over [10:26] quick question: anyone know of a gnome-compatible front-end to LAME? i'd like to batch convert a bunch of MP3s for use in a device that doesn't have great support. (i encode to 224vbs normally, car/work mp3-cd players need 128cbr to function well) [10:26] noop [10:26] Daverocks: Is that all I have to is shrink the NTFS partition and add a EXT3? [10:26] google 'er === xeem [n=tonci@89-172-118-220.adsl.net.t-com.hr] has joined #ubuntu === alumno [n=alumno@62.81.159.20] has joined #ubuntu === [niceday] [n=daniel@87.100.54.88] has joined #ubuntu [10:27] msfirefox-com: stability, familiarity with *nix (been using a BSD server for years), finally saw that everything I needed was on linux (well, other than a batch mp3 converter, lol) === jg [n=jag@dslb-084-058-044-228.pools.arcor-ip.net] has joined #ubuntu === jerb_ [n=herb@ACC0EE61.ipt.aol.com] has joined #ubuntu [10:27] yee === joachim-n [n=joachim@ACC9FBEE.ipt.aol.com] has joined #ubuntu [10:27] jordo2323: if it's a blank hard drive, you don't need to shrink the NTFS partition, you can just say, make a 30 GB (or any other size) partition before you start and install windows onto that, then you can just make another partition for ubuntu === abinadid [n=abinadid@conr-adsl-209-169-74-197.consolidated.net] has joined #ubuntu [10:28] Daverocks: you rock === DarkMageZ [n=richard@ppp252-249.lns3.syd6.internode.on.net] has joined #ubuntu [10:28] jordo2323: thanks :P [10:28] i almost did dual boot on 20gigs but said what the heck and just did ubuntu === cain_ [n=cain@196.44.1.98] has joined #ubuntu === Italiano1981 [n=jzakan@213.223.114.101] has joined #ubuntu [10:29] zerosmoke: that is a bit small for my tastes as well, had i been limited, i probably would have done the same :) [10:29] Daverocks: any Idea why when I click on Azureus it doesn't do anything if I have sun's java selected? === Blue-Omega [n=Blue@about/cooking/nakedchef/omelette/Blue-Omega] has joined #ubuntu === laza [n=laza@dslb-088-066-002-098.pools.arcor-ip.net] has joined #ubuntu === aldin [n=aldin@as54-ma1.dlp263.bih.net.ba] has left #ubuntu [] [10:29] jordo2323: i'm not familiar with the azureus package on ubuntu but the main azureus starter should be a bash script === b_52Free [n=skimo@adsl196-101-58-217-196.adsl196-10.iam.net.ma] has joined #ubuntu [10:30] well, i was going to help him further :P [10:30] probably had server issues === CarinArr [n=lq@opal.spod.org] has joined #ubuntu [10:31] his folks unplugged the router cause the blinking lights were bothering them === jordo2323 [n=jordo23@CPE-70-94-37-97.wi.res.rr.com] has joined #ubuntu [10:31] Daverocks: he didn't like y [10:31] ou [10:31] jordo2323: run it in a terminal, see what errors it gives you [10:31] wait, he does coz he's back [10:31] Flannel: I will pastebin....hold [10:31] lol wb jordo === Spee_Der [n=n1gke@ip68-14-29-148.ri.ri.cox.net] has joined #ubuntu [10:31] hey i'm having some problems with my packages.. I was installing some packages, ran out of battery, when I started back up again, everything is fine apart from the fbpager package is broken, trying to remove it synaptic just hangs at "removing fbpager ..." [10:32] or rather it doesn't hang.. the application is still running.. but it never gets further === Shadowpillar_ [n=Shadow@dialup-4.233.122.2.Dial1.LosAngeles1.Level3.net] has joined #ubuntu === maria [n=maria@212.145.75.216] has joined #ubuntu [10:32] CarinArr: you should be ok reverting to the backup package list. === Fjodor [n=sune@daimi-pat.daimi.au.dk] has joined #ubuntu [10:32] silentdis, how do i do that? [10:33] http://ubuntu.pastebin.com/820302 [10:33] CarinArr: let me look up the files for you. I *THINK* dapper and edgy are the same on this. === croppa [i=user101@135.27.233.220.exetel.com.au] has joined #ubuntu [10:33] silentdis, okay, thanks === fraiddo [n=fred@AAmiens-151-1-26-141.w83-192.abo.wanadoo.fr] has joined #ubuntu [10:34] i would be interested to know [10:34] Daverocks: http://ubuntu.pastebin.com/820302 [10:34] i almost ran out of battery running back to my apt from the cafe [10:34] Flannel: http://ubuntu.pastebin.com/820302 [10:34] while it was installing [10:34] jordo2323: and, you're sure you're using suns java? [10:34] :P [10:34] it's called living on the edge [10:34] heh [10:35] no pun intended [10:35] it's called annoying now;) [10:35] I installed sun-java5-jre [10:35] I went by the dapper instructions.... [10:35] jordo2323, did you configure alternatives? === ichiban [n=ichiban@n-vojtova.fch.vutbr.cz] has joined #ubuntu [10:35] CarinArr: Shows I did..... [10:35] CarinArr: It says option 2 or Sun's Java is selected [10:35] jordo2323, what does "which java" do [10:35] jordo2323: just to make sure, do a 'java -version' [10:36] or yeah.. that [10:36] CarinArr: you should find /etc/apt/sources.list and /etc/apt/sources.list~ [10:36] silentdis, okay [10:36] just copy ~ ? [10:36] you'll probably wanna just sudo su, as you require root access. [10:36] no, you'll want to use sudo [10:36] Flannel: java version "1.5.0_08" [10:36] good point flannel [10:37] "sudo -i" is a better way to get an interactive root shell === Caplain_ [n=matt@188.detroit-01-03rs.mi.dial-access.att.net] has joined #ubuntu [10:37] anyhow [10:37] CarinArr: sudo mv /etc/apt/sources.list /etc/apt/sources.list.backup === [niceday] _ [n=daniel@87.100.54.88] has joined #ubuntu [10:37] CarinArr: sudo mv /etc/apt/sources.list~ /etc/apt/sources.list === [niceday] [n=daniel@87.100.54.88] has joined #ubuntu === [niceday] _ [n=daniel@87.100.54.88] has joined #ubuntu [10:38] i don't have a sources.list~ [10:38] i have a sources.list.save [10:38] jordo2323: that sounds like suns version. You'll have to ask the azuerus people (or maybe check the ubuntu forums?) it's an error with azureus. [10:38] CarinArr: edgy or dapper? [10:38] edgy [10:38] Flannel: Wierd.... [10:38] installing nvidia-settings breaks nvidia-glx right? [10:38] CarinArr: i'm still running dapper, that's probably right. [10:38] CarinArr: that's fine. the ~ is a backup version made through certain methods [10:38] so should i copy the .save to sources.list? === RvGaTe [n=rvgate-f@g178204.upc-g.chello.nl] has joined #ubuntu === SilentDis is a bit scared to upgrade after all the problems people have had :P [10:39] Flannel: Is Azureus the best torrent client to use under linux? [10:39] CarinArr: I would recommend backing up the old one, just in case. [10:39] on my two other machines things are running perfectly === andy_t_roo [n=Andrew@ahill.roam.itee.uq.edu.au] has left #ubuntu [] [10:39] yeah i've backed i tup [10:39] do i have to do anything else? [10:40] CarinArr: yes, then just sudo mv /etc/apt/sources.list.save /etc/apt/sources.list [10:40] done [10:40] CarinArr: relaunch and should be good. [10:40] jordo2323: probably not. There are non java options that'll probably give you better prformance, I imagine theyre not as pretty though, but it all depends on what youre looking for in a torrent client [10:40] right, ta muchly === Hannes3 [n=8d4c2d23@lx02.formativ.net] has joined #ubuntu [10:40] Flannel: ever use Ktorrent? [10:41] I take it no one's herd of a batch GUI interface for LAME? :( [10:41] jordo2323: Nope. I don't have a GUI, so I use btdownloadcurses or btlaunchmanycurses ;) === oggisba [n=oggisba@gw.ruoholahti.petrasol.fi] has joined #ubuntu === inu|sleep [i=UPP@c-68-81-7-199.hsd1.de.comcast.net] has joined #ubuntu === oggisba [n=oggisba@gw.ruoholahti.petrasol.fi] has left #ubuntu [] === CheshireViking [n=Inter@i-195-137-101-182.freedom2surf.net] has joined #ubuntu === inu|sleep is now known as inuyasharenegade [10:42] hmm.. fbpager still shows as broken [10:42] but it actually removed it now when i asked it to === dao [n=dao@229-133.surfsnel.dsl.internl.net] has joined #ubuntu [10:42] wahey [10:42] *does happy dance* [10:43] CarinArr: :) that works. just make sure it isn't corrupted in your packages repository, and you can probably reinstall it :) [10:43] hi all === danielinu [n=diamanu@host233-109-static.187-82-b.business.telecomitalia.it] has joined #ubuntu [10:43] well i don't actually need it, so i'll steer clear;) === Ayabara [n=anr@194.196.35.3] has joined #ubuntu === Tusnal [i=Tusnal@87.235.85.106] has joined #ubuntu [10:44] Hi Mike === vegiVamp [n=demeersm@unimatrix.skynet.be] has joined #ubuntu [10:45] might have solved my problems, in a roundabout way... gonna check something. [10:45] Spee_Der, hi solved my prob with the systray icon === haydenAU [n=hayden@203-219-130-10.static.tpgi.com.au] has joined #ubuntu === TechCentric-Will [n=will@c-71-194-70-13.hsd1.il.comcast.net] has joined #ubuntu [10:46] It stays put does it ? === ChaKy [n=chaky@0-59.dsl.iskon.hr] has joined #ubuntu === atlas [n=atlas@AVelizy-152-1-72-38.w83-204.abo.wanadoo.fr] has joined #ubuntu [10:46] Hi, I have a problem installing ubuntu Edgy Eft on a Dell PowerEdge because when I'm at the first reboot during the installation after the "Please stand by while rebooting the system." the computer doesn't do nothing. [10:46] damn, that didn't work. crashes wine when i launch it rofl [10:46] Spee_Der, didnt see the statys-icon i have in danish [10:46] Spee_Der, didnt see the statys-icon i have in danis [10:46] how do i install nvidia drivers on edgy? [10:47] Spee_Der, yep it stays put === abinadid is now known as lancellor === tobias [n=tobias@dslb-084-063-014-003.pools.arcor-ip.net] has joined #ubuntu === atlas is now known as Atlas95 === Frekar [n=angel@pppoe-169.pm.spnet.net] has joined #ubuntu [10:47] in a dual boot system with edgy & xp, grub stops working everytime I have visited windows. I understand that this is a know bug, but is there a workaround/fix for it? === lancellor [n=abinadid@conr-adsl-209-169-74-197.consolidated.net] has left #ubuntu [] [10:48] !nvidia [10:48] To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto === sundu1 [n=sunduk@leased-line-224-66.telecom.by] has joined #ubuntu === atlas95_ [n=atlas@AVelizy-152-1-72-38.w83-204.abo.wanadoo.fr] has joined #ubuntu [10:49] Flannel: Is this suns version of java? http://ubuntu.pastebin.com/820305 ??? [10:49] MikeDK: All I need to do now is get the 2nd video port working, but I am not quite enough awake yet.... === cbx33 [n=c2df514b@84-45-197-14.no-dns-yet.enta.net] has joined #ubuntu [10:49] hi all, I'm reinstalling ubuntu right now so I can make an extended partition containing a primary for the OS and a 2nd for swap, but in the partitioner I can't make a extended partition [10:49] is this because the isk allready has an extended partition? (windows seems to be in an extended) [10:49] haydenAU: sudo apt-get nvidia-glx linux-restricted-modules- [10:50] haydenAU: sorry. sudo apt-get install nvidia-glx linux-restricted-modules- [10:50] guys does network-manager work on xfce? === LordMetroid [n=lordmetr@h196n3c1o885.bredband.skanova.com] has joined #ubuntu [10:50] SilentDis, thanks alot === sundu1 [n=sunduk@leased-line-224-66.telecom.by] has left #ubuntu [] [10:50] haydenAU: after that completes: sudo nvidia-glx-config enable === abattoir [n=abattoir@cm238.omega16.maxonline.com.sg] has joined #ubuntu === denver [n=denver@12.107.36.226] has joined #Ubuntu [10:51] SilentDis, Ok [10:51] dreamer: I wonder, do you have to sudo qparted for it to work correctly ? [10:51] Spee_Der: I'm in the Live-CD-install-mode right now .. === Khamael [n=raphael@73.80-202-81.nextgentel.com] has joined #ubuntu === crash_ [n=crash@84.78.99.40] has joined #ubuntu [10:51] oic [10:51] haydenAU: after that, should just need a gnome restart. if it breaks, you'll need to reconfigure x to use it. [10:51] Just a thought.... I gave up for now on dual boot. [10:51] HaydenAU this link here for the Nvidia driver but if u look like a big ? then dont use it [10:52] hmm [10:52] haydenAU: sorry, again. an X restart. it has been a long day. lol [10:52] HaydenAU https://help.ubuntu.com/community/Latest_Nvidia_Dapper [10:52] HaydenAU https://help.ubuntu.com/community/Latest_Nvidia_Dapper [10:52] Matter of fact, I only use Ubuntu on this machine.... lol [10:52] wel the problem originally was that I already have 4 primary partitions, so I couldn't make an extra swap-partition [10:52] wow [10:52] How big is the disk ? [10:52] HaydenAU this is for dapper only ill look for a link for edgy if i can find one === dinamizador [n=dinamiza@83.230.234.241] has joined #ubuntu === miep2 [n=acx@217.194.228.210] has joined #ubuntu [10:53] yea i had the driver installed on dapper, but it broke when i upgraded to edgy [10:53] Spee_Der: 300gb === crash_ [n=crash@84.78.99.40] has joined #ubuntu === miep2 [n=acx@217.194.228.210] has left #ubuntu ["Verlassend"] [10:53] phew [10:53] HaydenAU rgr that [10:53] further study on dual boot setup is in order I'd say === wombo [n=wombo@mail.rhodeswaterside.net] has joined #ubuntu === B-Minus [n=sdfdsfds@eu212-87-114-203.adsl.euphonynet.be] has joined #ubuntu [10:53] but, let me explain: first partiotion is extended, 15gb with in it a primary windows, then 15gbfor ubuntu, then 200 ntfs primary and 50 ntfs primary [10:54] Anyone here using Enlightenmetn with success ? [10:54] but, I can resize the windows partition to make room for swap apperantly [10:54] Spee_Der, why dual-boot :-)))) [10:54] Does Ubuntu come with LVM in the kernel by default? [10:54] but I cant't make that 15gb for ubuntu into an extended for that === desti [n=desti@p509239A7.dip0.t-ipconnect.de] has joined #ubuntu === crash_ [n=crash@84.78.99.40] has joined #ubuntu [10:54] wombo: I beleive it does. [10:54] it is saying that it cant find PVCREATE [10:55] hmm [10:55] MikeDK: Yeh huh. I have only 120 G and it is all Ubuntu, no this computer anyway. [10:55] Spee_Der, thou i have an XP-machine right by my side side but considering installing ubuntu on that one or maybe Gentoo [10:55] now my synaptic seems to be hanging at "setting up java-common" === CarinArr sighs [10:55] ive never built an LVM before, working from this howto http://www.mythtv.org/docs/mythtv-HOWTO-24.html [10:55] CarinArr: doh [10:55] without anything crashing and i wasn't trying to install that before === KomiaPoika [n=prkl@76.29-200-80.adsl-dyn.isp.belgacom.be] has joined #ubuntu === rob_anybody [n=kolja@dslb-084-056-094-064.pools.arcor-ip.net] has joined #ubuntu [10:56] Mikes_: This machine is dual 733 Mhz CPU with Ubuntu only. [10:56] hi [10:56] so it's completely clean install [10:56] what package do i have to install to enable smime validation in kmail? [10:56] Spee_Der, nice [10:56] MikeDK: The 2nd computer is dual 550 Mhz CPU's and four 9.1 G SCSI drives dedicated to running only SETIATHOME. === manmadha [n=sri_@202.63.100.54] has joined #ubuntu [10:57] CarinArr: i am not familiar enough with the debian system to provide a suggestion for this, possibly someone else can chime in? [10:57] THey are linked with Linksys router then through cable modem. [10:57] Spee_Der, considering buying a MacBook pro 15" or 17" [10:57] synaptic is flashing at me on the task bar as well but i don't normally use gnome so i don't know if means anything;) [10:57] Nice ! === passbe [n=passbe@ppp184-119.static.internode.on.net] has joined #ubuntu [10:58] Spee_Der, know there's porbs with the ubuntu on the Mac's buut love the Mac-design :-)) === IBNx451 [n=IBNx451@c-68-46-191-27.hsd1.nj.comcast.net] has joined #ubuntu === rob_anybody [n=kolja@dslb-084-056-094-064.pools.arcor-ip.net] has left #ubuntu ["...] === pc6 [n=pc6@222.124.224.99] has joined #ubuntu [10:58] Is there any built in software to do flash programs....like html editors...........>>>???? === trendzetter [n=jw@212.123.1.32] has joined #ubuntu [10:58] CarinArr: as a side note, i have yet to find a linux box that needed to have a 'completely clean install' in order to fix something, unless the kernel was totally toast and you couldn't extract it from a disk somewhere ;) [10:59] MikeDK: With all the support in Ubuntu and Linux per se, there should be little to no problems..... === metalhen [n=bhenne@wittgenstein.se.uni-hannover.de] has joined #ubuntu [10:59] aaarg, howcome you can only make 1 extended partition :S [10:59] because my disk already has one :S [10:59] MikeDK: I'd love to have a mobile wireless for all the driving I'm doing these days. [11:00] dreamer: you can only have 1 extended partition, and logical partitions go INSIDE that. [11:00] any body there? === Spee_Der heads for the stdio 'K' location for more coffee...... [11:00] SilentDis: I think I have a solution, but I lose 1gb of the unallocated space I allready have :/ [11:00] manmadha: what are you looking for? a WYSIWYG HTML editor? === trendzetter [n=jw@212.123.1.32] has left #ubuntu [] [11:00] Spee_Der, agree that would be nice [11:00] Hi. anybody using ldap (libnss_ldap) with edgy? I get ldap timeouts on every system bootup - it seems like upstart starts something using ldap before configuring network connection [11:00] I resize my windows with 1gb for swap === pc6 [n=pc6@222.124.224.99] has left #ubuntu ["Leaving"] === [niceday] [n=daniel@87.100.54.88] has joined #ubuntu === striker_ [n=diamanu@host233-109-static.187-82-b.business.telecomitalia.it] has joined #ubuntu === [niceday] [n=daniel@87.100.54.88] has joined #ubuntu [11:01] smime is greyed out in kmail, what packages do i miss to get them enabled? [11:02] Yeh..... [11:02] Hey all I have a question .... can anyone tell me what the heck this here means >>> STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME === Yukio [n=silvia@82.229.138.141] has joined #ubuntu === philc [n=reformis@72.173.30.38] has joined #ubuntu [11:03] SilentDis, i want the tool like screem html/xml editor === Eleaf [n=ethan@69.39.23.237] has joined #ubuntu === sbc [n=sbc@83.72.201.52.ip.tele2adsl.dk] has joined #ubuntu [11:04] manmadha: i have not done any flash work myself. i usually stick to php/mysql coding with my html, and for that i just use text editors. possibly someone can suggest a flash development environment for linux? === Mantice [n=richard@125-236-172-117.broadband-telecom.global-gateway.net.nz] has joined #ubuntu === KomiaPoika [n=prkl@76.29-200-80.adsl-dyn.isp.belgacom.be] has left #ubuntu [] [11:05] SilentDis, i have heard that there is no flash development in linux... [11:05] Where can I get a Unrarer..... ?????? === [niceday] [n=daniel@87.100.54.88] has joined #ubuntu === Staz [n=staz@IRC-MAFIA.net] has joined #UBUNTU [11:05] I found a command line unrarer but I couldent get it to work. [11:05] Mantice: command line should just be called unrar [11:06] I'm mounting a samba share in fstab, why is it I can ONLY write to the mounted share if I have uid=1000? [11:06] why is that necessary [11:06] I couldent get it to locate the archive. === krampo_ [n=krampo@krampis.cs.fmf.lu.lv] has joined #ubuntu [11:06] Mantice: sudo apt-get install unrar [11:06] Ive got it installed I dont know how to use it [11:06] IBNx451: how did you get that message? [11:06] Mantice: type unrar --help :) [11:06] I did. I dident understand the instructions === gonk23 [n=gonk23@218-215-130-57.people.net.au] has joined #ubuntu === idontknow [n=harshul@c58-107-78-152.blktn1.nsw.optusnet.com.au] has joined #ubuntu [11:07] I have unrar-free [11:07] Mantice: let me install and take a gander === decadre [n=jaidev@124-168-237-42.dyn.iinet.net.au] has joined #ubuntu === ben_underscore [n=ben@ppp226-213.lns2.adl4.internode.on.net] has joined #ubuntu === hedix [i=usr938@c1.edrana.lt] has joined #ubuntu === crash_ [n=crash@84.78.99.40] has joined #ubuntu === crimeboy [n=crimeboy@20150100116.user.veloxzone.com.br] has joined #ubuntu === MattJ [n=matthew@88-111-143-12.dynamic.dsl.as9105.com] has joined #ubuntu === jorik [n=olmo@cable-213-132-135-152.upc.chello.be] has joined #ubuntu [11:09] Mantice: should be able to type unrar-free archive.rar /path/to/extract/to === rubso [n=rubso@adsl2-72.qualitynet.net] has joined #ubuntu === IBNx451 [n=IBNx451@c-68-46-191-27.hsd1.nj.comcast.net] has left #ubuntu [] === etdsdvgfhrtz [n=karlkoel@modemcable059.240-37-24.mc.videotron.ca] has joined #ubuntu [11:10] its a me === elbonzi [n=bonzi@207.62.154.101] has joined #ubuntu [11:10] Hey guys, where can i get Real Player for Edgy? [11:11] does anyone here know anything about programming in C? [11:11] elbonzi: www.cprogramming.com [11:11] ive been trying to find it on there actually but its a weird question [11:11] elbonzi: only enough to cause major horrible problems with code making changes that i THOUGHT should work and thus costing me 4 days of banging my head against before I finally give up. [11:12] haha === bogdanp9 [n=bogdanp9@rof76-1-82-233-230-62.fbx.proxad.net] has joined #ubuntu [11:12] elbonzi: #ubuntu-offtopic, or ##C === foysavas [n=foysavas@static-72-74-246-50.bstnma.fios.verizon.net] has joined #ubuntu [11:12] rubso: please check the FAQ === SilentDis shall stick with just scripting and be happy :) [11:13] apokryphos: i did, Realplayer is availabe for Dapper only through Canonical Commercial Repository. [11:13] rubso: you need to download it from the realplayer website, I believe. [11:13] SilentDis that did not work. === soundray [n=soundray@dsl-217-155-44-246.zen.co.uk] has joined #ubuntu [11:14] Mantice: what error did you get? [11:14] SilentDis: better solution please ! === Sby_Fitnes_Diran [n=pc1@222.124.224.99] has joined #ubuntu === pc6 [n=pc6@222.124.224.99] has joined #ubuntu [11:14] Well you know how you point the dir to extract to. [11:14] rubso: mmm... *does a search for ffmpeg to convert .rm files to .mpegs* :P === pc6 [n=pc6@222.124.224.99] has left #ubuntu ["Leaving"] [11:14] grrrr [11:14] where to get hacker toolz for ubuntu? [11:14] It thought thats were the rar file was. [11:14] SilentDis: to MP3? [11:15] so it just hang on installing java [11:15] so i had to kill it [11:15] and now it hangs on removing the part installed stuff === rob [i=RobertSt@freenode/staff/rob] has joined #ubuntu === brb [n=hendrik@a133.lmu.vpn.lrz-muenchen.de] has joined #ubuntu [11:15] rubso: and it doesn't work on edgy? I recommend compiling it from source then. === EDVINAS_ [i=usr945@c1.edrana.lt] has joined #ubuntu [11:16] *cries a little* [11:16] rubso: i am not sure if that's even possible... though I've seen ffmpeg scripts that handle youtube movies, so it's not outside the realm of possibility :P [11:16] apokryphos: lol, Real Player is not open source software. its a commercial one. === vindrake [n=vindrake@AMontpellier-257-1-98-211.w86-219.abo.wanadoo.fr] has joined #ubuntu === tvelocity [n=tony@ipa140.0.tellas.gr] has joined #ubuntu [11:16] SilentDis: indeed. [11:16] rubso, there are much better opensource players available for linux [11:16] rubso: whoop, I realised just after posting. I mean getting the tar.gz and firing up the binary === snowblink [n=snowblin@wind.snowblink.co.uk] has joined #ubuntu [11:16] SilentDis Dont worry It seams when you install the non free version file roller can extract them. [11:17] ssh-agent stopped working for me when I upgraded to edgy. Any ideas why & how to fix? === StAfZe6 [n=StAfZe@host86-132-72-155.range86-132.btcentralplus.com] has joined #ubuntu [11:17] rubso: and you can also have other players play realmedia [11:17] Mantice: that works [11:17] apokryphos: then that's what i'm going to do after all. but ... but.... Packages would be cool. === eggzeck [n=exec@cpe-68-175-49-54.nyc.res.rr.com] has joined #ubuntu [11:17] apokryphos: i know, my Default kubunt media player could play RMs but plays 3gp without sound. [11:17] where to get hacker toolz for ubuntu? === crash_ is now known as CrAsH64 === xerxas [n=R67894@AGrenoble-257-1-89-145.w86-219.abo.wanadoo.fr] has joined #ubuntu === Staz [n=staz@IRC-MAFIA.net] has left #UBUNTU ["Leaving"] [11:18] !code | etdsdvgfhrtz [11:18] etdsdvgfhrtz: Programming editors/suites: Terminal-based: vi/vim, emacs; KDE: Kate, KDevelop, Quanta+, Umbrello; GNOME: gvim, gedit, eclipse, pida [11:18] a final check for my problem, as so many have come and gone: anyone know of a batch 'converter' of sorts for MP3s? looking for basically a batch interface for LAME with ID3 tag support. === samigarus [n=samigaru@218.93.201.146] has joined #ubuntu [11:18] no, i want hacker toolz [11:18] How do you run a .sh file ??? [11:18] not programming toolz [11:18] etdsdvgfhrtz: those are hacking tools. === geser [n=michael@dialin104124.justdsl.de] has joined #ubuntu [11:18] from console ? [11:18] Mantice: with bash or sh [11:18] Mantice: sh blah.sh [11:18] i want to hack a friend [11:18] etdsdvgfhrtz: for "hacking" people? No, please do not ask here. [11:18] Mantice: "bash file.sh" [11:18] etdsdvgfhrtz: if you want cracking tools, then... you've already got it: telnet. Have fun. [11:19] whats telnet? === plitskin [n=ubuntu@203.192.160.230] has joined #ubuntu [11:19] the only cracking tool you === plitskin [n=ubuntu@203.192.160.230] has left #ubuntu ["Konversation] [11:19] you'll ever need === Vich [n=Chris@ppp40-204.lns2.syd6.internode.on.net] has joined #ubuntu [11:19] etdsdvgfhrtz: if you don't know what telnet is, then I don't think you're really ready for 'hacking people' [11:19] telnet makes basic TCP connections [11:19] hm? [11:19] etdsdvgfhrtz: axes work best, as the human structure is quite soft for the most part. bring the axe up and down in a very fast motion over said friend. :D [11:19] i just need msn hack [11:19] or icq hack [11:19] lol Silent [11:19] Thanks === pc22 [n=nes@210.213.219.184] has joined #ubuntu === hh [n=hhr@0x3e42a191.adsl.cybercity.dk] has joined #ubuntu [11:20] Time to get ready for work, later all... [11:20] do not you have msn hack? [11:20] etdsdvgfhrtz, why do you think people in the ubuntu channel would help you with hacking? try something like hackthissite.org === mode/#ubuntu [+o apokryphos] by ChanServ === etdsdvgfhrtz was kicked off #ubuntu by apokryphos (no hacking here) === mode/#ubuntu [-o apokryphos] by apokryphos === etdsdvgfhrtz [n=karlkoel@modemcable059.240-37-24.mc.videotron.ca] has joined #ubuntu [11:20] oh === rob [i=RobertSt@freenode/staff/rob] has joined #ubuntu [11:20] etdsdvgfhrtz: now, please stop :) [11:20] you were not op before! === Spee_Der [n=n1gke@ip68-14-29-148.ri.ri.cox.net] has left #ubuntu [] === SilentDis cheers for apokryphos! [11:20] lmao === hh [n=hhr@0x3e42a191.adsl.cybercity.dk] has left #ubuntu [] === Spee_Der [n=n1gke@ip68-14-29-148.ri.ri.cox.net] has joined #ubuntu === Spee_Der [n=n1gke@ip68-14-29-148.ri.ri.cox.net] has left #ubuntu [] === nes_ [n=nes@210.213.219.184] has joined #ubuntu === hh [n=hhr@0x3e42a191.adsl.cybercity.dk] has joined #ubuntu === webben [n=benjamin@91.84.18.157] has joined #ubuntu === rubso i'm in ur kbuntu dawnlading mi realplayur !!!! [11:21] cool!!! === Ayabara [n=anr@194.196.35.3] has left #ubuntu ["Leaving"] [11:22] sneeky magical bots and seekret hidden opseez. :) [11:22] i also use kubuntu!! [11:22] KDE. [11:22] me too! === coz_ [n=coz_@pool-70-17-176-216.pitt.east.verizon.net] has joined #ubuntu [11:22] kde is much better than gnom [11:22] it is [11:22] :) [11:23] thats true [11:23] etdsdvgfhrtz, in what way [11:23] :P will, you shouldn't start a debate about this in here! === SilentDis watches the zealots crawl from the woodwork and hides in a safe corner. [11:23] Guys, #ubuntu-offtopic is open for all of this talk. #kubuntu also exists, for KDE-related-support [11:23] apokryphos: lol i know! [11:24] damnit, the live-cd has crashed :S [11:24] well I just awoke 5:24 Am here === mareks [n=marek@CPE-70-92-232-88.wi.res.rr.com] has joined #ubuntu [11:24] oh noooooezz [11:24] #ubuntu is not for kde support? [11:24] how to set up VPN? [11:24] what is vpn? [11:24] dreamer, how much memeory do you have? [11:24] etdsdvgfhrtz: try #kubuntu or #kde [11:24] etdsdvgfhrtz: there's #kubuntu for that, yes [11:24] coz_: 512 [11:24] markets: a server or a client? [11:24] !vpm [11:24] Virtual Pvt Netwrk [11:24] Sorry, I don't know anything about vpm - try searching on http://bots.ubuntulinux.nl/factoids.cgi [11:24] dreamer more than enough [11:24] mareks: http://digg.com/software/How_To_Set_Up_Microsoft_VPN_Connection_In_Ubuntu_6_10_Edgy_Eft [11:24] !vpn [11:24] From more information on vpn please refer to https://help.ubuntu.com/community/Gaming_VPN_Using_PPTPD [11:25] lol [11:25] rubso, non microsoft VPN would be preferable ? [11:25] rubso: i have 6.06 also [11:25] coz_: I wanted to use the Live-cd to resize my windows partition (which is in an extended apperntly :S) and make the extra space into swap for ubuntu [11:25] but it borked :S === Bobrobyn [n=robyn@guestlaptop-12.cis.uoguelph.ca] has joined #ubuntu === omkar86 [n=omkar86@59.183.26.133] has joined #ubuntu [11:26] What can I do about ssh-agent not remembering my keys any more (since edgy upgrade)? How to diagnose, how to fix? === omkar86 [n=omkar86@59.183.26.133] has left #ubuntu [] [11:26] jeg hopper ses kommer p senere === lastnode [n=lastnode@unaffiliated/mahangu] has joined #ubuntu === omkar86 [n=omkar86@59.183.26.133] has joined #ubuntu [11:26] jews lol wtc lol === pc6 [n=pc6@222.124.224.99] has joined #ubuntu === cheesy [n=cheesy@dslb-084-056-000-240.pools.arcor-ip.net] has joined #ubuntu [11:26] hi [11:26] !se [11:26] Svensk Ubuntu- och Kubuntusupport hittar du pa #ubuntu-se resp. #kubuntu-se === MikeDK [n=michael@27-255-173-213.static.dsl.webpartner.net] has left #ubuntu ["Ex-Chat"] [11:26] cafuego, ping please [11:27] *sigh* i just might be writing a nautilus script for this then. I remember reading, at one time, about a window messaging system for nautilus, so you can easily 'draw windows' from the command prompt for your scripts. what is this package called, so I can look into it more? === jarrad_ [n=jarrad@203-173-52-216.dyn.iinet.net.au] has joined #ubuntu [11:27] soundray, my suggestion will be irritating however, I never suggest an upgrade from one version to another, the errors can be potentially damaging, I always suggest a clean install, there will be thoses here that disagree with me === Sby_Fitnes_Diran [n=pc1@222.124.224.99] has joined #ubuntu === adnans [n=adnans@linuxgoeroe.demon.nl] has joined #ubuntu [11:28] !de [11:28] Deutschsprachige Hilfe fuer Probleme mit Ubuntu, Kubuntu und Edubuntu finden Sie in den Kanaelen #ubuntu-de, #kubuntu-de, #xubuntu-de und #edubuntu-de [11:28] coz_: I went from warty to breezy to dapper to edgy with no other serious problems. No specific suggestions for my prob? === liberty [n=invite@62.56.243.150] has joined #ubuntu === deeem is now known as deeeem === visik7 [n=visi@unaffiliated/visik7] has joined #ubuntu === thegve [n=germ@80.112.194.210] has joined #ubuntu [11:29] SilentDis: you don't mean zenity, or do you? [11:29] soundray: zenity, that's it, thank you :) === Zdra [n=zdra@54.196-241-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [11:29] soundray, sorry guy === Adebisi [i=european@151.56.202.254] has joined #ubuntu === Nchalada [n=non@d220-238-160-222.dsl.vic.optusnet.com.au] has joined #ubuntu === Adebisi [i=european@151.56.202.254] has left #ubuntu [] [11:30] soundray: this will be a bit of an undertaking for me. ah well, always a good way to learn. necessity is the mother of invention :) [11:30] Realplayer installed > mission accomplished. [11:30] rubso: yay! did you pull a .deb from their homepage or the like? === Curuxz [n=james@host-84-9-150-206.bulldogdsl.com] has joined #ubuntu [11:30] rubso: with the binary? [11:31] SilentDis, apokryphos: yes with the binary. === shino [n=shino@60.0.70.246] has joined #ubuntu === enz0 [n=ruben@cm48243.red83-165.mundo-r.com] has joined #ubuntu === neil [n=neil@cpc1-bigg1-0-0-cust731.lutn.cable.ntl.com] has joined #ubuntu === cafuego can't help it, someone else wrecked it [11:31] rubso: and 3gp files work well there? [11:31] rubso: good to know for future refrence :) === neil is now known as neil__ [11:32] yes it works well. === enz0 [n=ruben@cm48243.red83-165.mundo-r.com] has joined #ubuntu === deeeem is now known as deeem === ilikewtc [n=ilikewtc@125.182.104.63] has joined #ubuntu === esion [n=esion@ron34-1-82-224-148-91.fbx.proxad.net] has joined #ubuntu [11:32] btw, guys you should give Flash Player 9 a try, its totally better than the old one. === hastesaver [i=shreevat@unaffiliated/hastesaver] has joined #ubuntu [11:33] I've a problem with edgy and a custom kernel : I've build my custom kernel with the same configure of 2.6.17-10-generic and add only one option ( Compile the kernel with debug info ) and I hadn't remove anything, all works fine slash screen and all the peripherals but if I boot in console nothing is visible expect a blinking cursor and resolution 1400x1050 (setuped via vga=0x348 at kernel boot parameters) doesn't working [11:33] rubso: it still crashes occasionally === onurx_ubuntu [n=onur@85.98.150.91] has joined #ubuntu === shino [n=shino@60.0.70.246] has left #ubuntu ["Ex-Chat"] [11:33] How does one extract images from a PDF file? [11:33] neil_: i tried once in Dapper Drake "Ubuntu" and it was crashing like **** [11:34] There is a commandline tool called pdfimages, which is part of xpdf.utils, but it never seems to work === DBLobster [n=shino@60.0.70.246] has joined #ubuntu [11:34] hastesaver: i *think* you can copy them with the reader util... otherwise, you're doing a screen cap and editing it in gimp, i'm sorry to say. [11:34] now it crashes less in Edgy cuz its still a beta, but the video and audio is better in fp9 [11:34] hastesaver: I've only ever done it by taking a screenshot [11:34] Can anyone recommend a good external sata drive tower that can hold 6+ drives? === Yancho [n=yancho@195.158.87.23] has joined #ubuntu [11:35] ubotu you are so sexy [11:35] Sorry, I don't know anything about you are so sexy - try searching on http://bots.ubuntulinux.nl/factoids.cgi [11:35] ROFL! [11:35] SilentDis, dooglus: thanks === idontknow2 [n=harshul@c58-107-78-152.blktn1.nsw.optusnet.com.au] has joined #ubuntu === xeem [n=tonci@89-172-118-220.adsl.net.t-com.hr] has left #ubuntu [] [11:35] your ovations of lust are apparently wasted, jokoon *giggle* === diamanu [n=diamanu@host233-109-static.187-82-b.business.telecomitalia.it] has joined #ubuntu === Marioman64 [n=Marioman@c-68-49-17-97.hsd1.md.comcast.net] has joined #ubuntu === pc22 [n=nes@210.213.219.184] has left #ubuntu ["Leaving"] === glagla [n=laurent@ALille-257-1-148-120.w86-208.abo.wanadoo.fr] has joined #ubuntu [11:36] excuse did you just speak english ? === pussypower [n=pussypow@62.5.237.66] has joined #ubuntu [11:37] Hey all :) === onurx_ubuntu [n=onur@85.98.150.91] has joined #ubuntu [11:37] Curuxz, welcome [11:37] I want some advice from you lot on 'pimping my ride' lol [11:37] aFUNNY [11:37] LOL === Marioman64 [n=Marioman@c-68-49-17-97.hsd1.md.comcast.net] has left #ubuntu [] === glagla [n=laurent@ALille-257-1-148-120.w86-208.abo.wanadoo.fr] has left #ubuntu ["Quitte"] [11:37] I do web design and cad and for years have had 2 17" crt's which have annoyed the crap out of me [11:38] so i finaly desided to get a 32" inch flatscreen, so now my pc looks cool, so i need to tweek the software === DBLobster [n=shino@60.0.70.246] has left #ubuntu ["Ex-Chat"] [11:38] lol jews lol wtc [11:38] there is a lagitimate reason behind wanting to 'pimp' it since i have clients in here and it needs to look proffesional [11:38] Curuxz: only 2? I do web dev and have a 19" LCD and a 17" and find it limiting. I am not surprized you're looking for better. :) === DBLobster [n=shino@60.0.70.246] has joined #ubuntu === Dybber [n=a@0x3e42d1c0.adsl.cybercity.dk] has joined #ubuntu === DBLobster [n=shino@60.0.70.246] has left #ubuntu ["Ex-Chat"] === omkar86 [n=omkar86@59.183.26.133] has left #ubuntu [] [11:39] i have been playing with E17 all morning it looks great but is a little......buggy :S any ideas for getting a really powerfull system that actauly has a working system tray lol === fix___ [n=fix@cable-87-244-191-89.upc.chello.be] has joined #ubuntu [11:39] !themes | Curuxz [11:39] Curuxz: Find your themes at: http://www.gnome-look.org - http://kdelook.org - http://themes.freshmeat.net/browse/58/ - http://www.guistyles.com - https://wiki.ubuntu.com/Artwork/ - Also see !changethemes and https://help.ubuntu.com/community/UbuntuEyeCandy [11:39] silent, at one point i used 4 crt's! lol you need so much space when doing design === crapz0r [n=crapz0r@hash.bestnet.ua] has joined #ubuntu [11:40] Curuxz: also, if you have a good card you can't really get better eyecandy than with Xgl and Beryl [11:40] Curuxz: oh I bet. web dev just has me using a lot of refrence material. I can only imagine what it's like for CAD design :) [11:40] this 32" is rated 1377x768 but in linux works at 1600x1200 with out breaking a sweat crystal clear and now im using only 1 screen it makes things like xgl easy (since dual can be a bitch) [11:40] ooooh [11:40] whats berryl for kde or gnome? [11:40] Curuxz: GNOME and KDE are both good [11:41] beryl is gorgeous [11:41] anyone with a custom kernel ? [11:41] i have herd a lot about berrl but have not really seen it in action === SeAofSaRo [n=john@64-195-89-5.mod.clearwire-dns.net] has joined #ubuntu [11:41] do you guys think it beats E17 in 'bling' ? lol [11:41] Curuxz: let me get you a link, then :) [11:41] apokryphos: thank you for those links btw. always nice to make pretty hehe :) [11:41] Curuxz, a window manager that is cool take a look on youtube.com and type beryl in to watch a video [11:41] thanks guys :) === zerosmoke [n=zerosmok@200.38.248.230] has joined #ubuntu [11:42] coz.....taking a look :) === tahorg [i=tahorg@lutin.jard.in] has joined #ubuntu [11:42] Curuxz, you will like it! [11:42] Curuxz; http://video.google.com/videoplay?docid=2458516385220668619&q=beryl+on+ubuntu === hard_i [n=hard_i@rapla.net] has joined #ubuntu [11:42] and http://www.youtube.com/watch?v=i0ZtcxHUSDQ [11:43] out of intrest how hard is it to install? [11:43] not very [11:43] since E17 was in a repo and very easy to get hold off [11:43] *of [11:43] !beryl | Curuxz [11:43] Curuxz, not hard what video card do you have??? [11:43] Curuxz: beryl is a window manager that takes advantage of an OpenGL accelerated X environment. See http://forum.beryl-project.org/ - Please see #ubuntu-xgl for help with beryl. [11:43] hi, I've got a problem after a fresh mysql-server-5.0 install === [Nige] [n=nige@203-206-34-228.dyn.iinet.net.au] has joined #ubuntu [11:43] <[Nige] > hi all [11:43] after the install the mysqld starts [11:43] i have an Gforce fx 5200 i think [11:43] ooho [11:43] one of the crappy ones :( lol [11:43] but an /etc/init.d/mysql restart [11:43] that's a little low === charles_ [n=charles@222.124.224.99] has joined #ubuntu [11:43] gives me a fail. === Jokerman`lirmm [n=valery@ace.lirmm.fr] has joined #ubuntu [11:43] Curuxz, enough for this hole on i will give link to how to [11:43] would probably still work... [11:44] thanks :) [11:44] but may be slow [11:44] Can you recommend a procedure for changing graphics cards? I'm using an onboard ATI with the ati driver now, and I have a NVidia card that I want to switch to. [11:44] Curuxz: not ideal, but it's good enough for most things on there. === heatxsink [n=heatxsin@pool-71-118-76-252.lsanca.dsl-w.verizon.net] has joined #ubuntu [11:44] beryl looks sweet! [11:44] Curuxz, here you go read first slwoly, the proceed carefully http://forum.beryl-project.org/topic-5021-howto-beryl-aiglx-nvidia-drivers [11:44] thanks for your help ill give it a go :D [11:45] i am going to reinstall edgy from scratch first since i have been running the beta from day 1 === hedix [i=usr964@c1.edrana.lt] has joined #ubuntu [11:45] and all the patches and hacks over the last 4 months have caused a few probs ;) [11:45] one way to make ms sweat, and help ubuntu along, make it easier for everybody, and no i'm not a treehugger, just trying to push a good thing along...register on the ubuntu forums, it's easy, and write a little how to about how you did it... [11:45] Curuxz, that would be a wise Idea [11:46] Curuxz, do all the updates etc before you do beryl [11:46] then ill try the howto, hopefully i can return to my native KDE with this beryl thing [11:46] yeah will do :) [11:46] !beryl [11:46] beryl is a window manager that takes advantage of an OpenGL accelerated X environment. See http://forum.beryl-project.org/ - Please see #ubuntu-xgl for help with beryl. === dv_ [n=dv@M1271P020.adsl.highway.telekom.at] has joined #ubuntu [11:46] Curuxz, the how to I gave you is for gnome hole on i will find KDE how to [11:46] oh rite...... thanks :D [11:47] Curuxz, actually there should be little difference [11:47] Curuxz, but let me check [11:47] if i just chose to load kde instead of gnome it will just transfer tho rite? [11:47] since it is attached to X server by the looks of things === [irtool] [n=irtool@p508C51C3.dip.t-dialin.net] has joined #ubuntu [11:49] Curuxz, here is another one, you may want to refer to both how tos and glean the appropriate moves http://wiki.beryl-project.org/index.php/Install/Ubuntu/Edgy/AiGLX === bonzai10 [i=bonzai10@janulla.net.autocom.pl] has joined #ubuntu === bonzai10 [i=bonzai10@janulla.net.autocom.pl] has left #ubuntu [] [11:49] thanks coz :) [11:49] Curuxz, no problem and good luck!!! [11:50] :D ill give it a go, later guys have a nice day! [11:50] Curuxz, another suggestion is to google KDE beryl buntu to be sure [11:50] ubuntu === Xappe [i=xappe@razorconsulting.net] has joined #ubuntu === Ayabara [n=anr@194.196.35.3] has joined #ubuntu === cartucho [n=cartucho@201-15-174-199.paemt705.dsl.brasiltelecom.net.br] has joined #ubuntu === Adna [n=Adna@p54A5120B.dip0.t-ipconnect.de] has joined #ubuntu === svu_ [n=svu@83.167.239.56] has joined #ubuntu === netpython [n=petnytho@wikipedia/netpython] has joined #ubuntu [11:52] hi [11:52] hi [11:52] guys, sorry for posting abotu this again....Ineed to configuer a wpa wireless card in xubuntu - does network manager work [11:52] or do I have to do manual configuration === bettyboop1975 [n=bettyboo@213-140-21-233.fastres.net] has joined #ubuntu [11:52] muahhh some problem here :) [11:53] same === mpetsas [n=mpe@ppp15-83.adsl.forthnet.gr] has joined #ubuntu [11:53] I can't config my Intel(R) PRO/Wireless 3945ABG Network Connection under Ubuntu but under Kanotix it works without any problems [11:53] cbx33: wpa_supplicant in edgy is broken === NET||abuse [n=lukeab@86.43.66.72] has joined #ubuntu [11:53] whhaaA?? [11:53] neil__: really? [11:54] cbx33: it's in the release notes. [11:54] Adna, did you check to see if it is supported [11:54] Adna, I will look also on google [11:54] hmm, ok, so now I made a 1gb swap partition, but how do I activate it ? [11:54] cbx33: the PLF repository has one. don't know if that works though? === e_machinist [n=matthew@dialup-4.253.64.69.Dial1.Dallas1.Level3.net] has joined #ubuntu [11:54] nope I simply tried it, and iwconfig shows me eth1 but unassociated [11:54] dreamer, swapon /dev/hda1 [11:55] dreamer, if /dev/hda1 is the swap ofcourse === anders9034 [n=anders@cm-84.208.241.068.chello.no] has joined #ubuntu [11:55] dreamer: put an entry in fstab and swapon it [11:55] no I'll switch wpa off and try it again, perhaps this is the problem [11:55] hmmm, lets see what the location is .. [11:55] hda6 [11:55] Adna, Look here http://www.ubuntuforums.org/showthread.php?t=140085&page=7 [11:55] hello gcc and cc comes with ubuntu but where is stdio.h? do i have to install some package to get this "default" lib? [11:55] extended heh,? === mariago [n=mariago@83.230.208.227] has joined #ubuntu [11:56] gjob [11:56] has anyone here modified GRUB so it skips stage1_5 and chainloads stage2 directly from stage1? === tobias [n=tobias@dslb-084-063-014-003.pools.arcor-ip.net] has joined #ubuntu [11:56] When I try to "configure" Firefox 2.0 source, I get this message, error: --enable-application=APP is required, what does this mean or what do I need to do to fix this? === Jaeke555 [n=jaeke33@cu149.netikka.fi] has joined #ubuntu === abattoir [n=abattoir@cm238.omega16.maxonline.com.sg] has joined #ubuntu [11:57] ./configure --enable-application=APP @ e_machinist [11:57] thankz coz_ !! [11:57] Adna, hope it helps [11:57] netpython: @ me ? [11:57] in that case, which package? [11:57] dreamer, yes [11:57] ok, well [11:57] hi! why can't I access a command-prompt with "ctrl+alt+f1-6" anymore in edgy? is this disabled now? Can I re-enable it? [11:57] I'll try to install it now.. [11:57] Tschaka: @ e_machinist would be my user name? [11:57] mi XP-partitiotn was already in an extended :/ so I couldn't make a new one [11:58] e_machinist yes ;) [11:58] but, I resized the win-part with 1 gb and made that swap :) [11:58] Tschaka: thanks, I'll give it a go. [11:58] so anyone know which package is required to get stdio.h ?? [11:58] tobias, you want to get to command it is still ctrl+alt+F1 [11:58] tobias, did you edit /etc/securetty? === shybecky [n=becky_mo@82.128.11.162] has joined #ubuntu [11:58] only thing is I still have that 1gb of unallocated space .. ahh well === rc-1 [n=rc-1@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu [11:58] hi, sound isnt playing, i have mute off, help? [11:58] dreamer, you could make it an extra swap [11:59] netpython: No, did I have to? I just reinstalled edgy clean&sweet yesterday... [11:59] rc-1 try alsamixer in console [11:59] rc-1, start from the beginning, when did thid happen/ [11:59] this [11:59] netpython: how?? [11:59] im on a fresh install [11:59] I can't make it a primary or extended partition [11:59] that was the whole point :P [11:59] Tschaka: I get this when I add my user name, configure: warning: @: invalid host type, and on the next line, configure: error: can only configure for one host and one target at a time [11:59] tobias, in this case no it's allright [11:59] rc-1, in the terminal typ alsamixer and check if anything is muted [12:00] coz: Not on my box. === skaos [n=freinc@212.184.18.101] has joined #ubuntu === joachim-n [n=joachim@ACC9FBEE.ipt.aol.com] has joined #ubuntu [12:00] cbx33: my bad. i think it's ndiswrapper that's broken in edgy [12:00] e_machinist "configure --enable-application=APP" so this one doenst work? oO [12:00] rc-1: Is there a cross through the volume manager in the panel bar? === nUllSkillZ [n=oliver@p54B2E47D.dip.t-dialin.net] has joined #ubuntu [12:00] master says 00 [12:00] rc-1: In that case your sound card wasn't detected [12:00] cbx33: i can't find the reference to it atm. i'll look again [12:00] hmm, what is the mointpoint for swap ? [12:00] rc-1: It is detected then :) [12:01] the volume bar has no cross [12:01] drat thanks anyways [12:01] netpython: ctrl+alt+f1-6 just show a screwed-up screen, but no console... in dapper this worked just fine! === Yancho [n=yancho@195.158.87.23] has joined #ubuntu [12:01] dreamer: none :) [12:01] tobias, strange === alynx [n=tkj@193.213.31.115] has joined #ubuntu [12:01] tobias, out of curoisity, did you upgrade from dapper to edgy? [12:01] netpython: Indeed! :-) [12:01] Tschaka: when I run "configure --enable-application=APP" I also get, configure: error: --enable-application=APP is required [12:01] brb ill open up comp and make sure its plugged in [12:02] tobias, or clean install === klm- [n=isometsa@tpt25.org.helsinki.fi] has joined #ubuntu === alynx [n=tkj@193.213.31.115] has left #ubuntu [] [12:02] neil__: kay, so I don't need to edit fstab? [12:02] ahhh that would make sense [12:02] I think swapon already fixed it anyway .. [12:02] e_machinist http://forums.mozillazine.org/viewtopic.php?p=2484066&sid=2c272aee5d94cff1347ed9f5fe9c4399 try this one [12:02] netpython: I just don't want to have to boot into recovery-mode every time I play around with xorg.conf ... === anders9034 announces the solution: sudo apt-get install build-essential [12:03] dreamer: partition none swap sw 0 0 === ANaRcHiC-nix [n=robin@84-12-154-120.dyn.gotadsl.co.uk] has joined #ubuntu [12:03] tobias, fair enough [12:03] dreamer: you need that for swapon -a at startup to activate swap [12:03] Tschaka: dang, you got magic "find exact problems" powers? [12:03] tobias sudo /etc/init.d/gdm stop should give you a console xD [12:03] neil__: the swap already shows up in top [12:03] e_machinist i got google :D === egon_spengler [n=egon@pool-71-98-65-181.ipslin.dsl-w.verizon.net] has joined #ubuntu [12:03] and free [12:04] coz: First an upgrade, then I played around TOO much ;-) and did a fresh install just yesterday ... the problem appeared on both the dapper-edgy upgraded system as well as my fresh install I'm using right now. === yeager [n=yeager@81-232-79-220-no46.business.telia.com] has joined #ubuntu [12:04] dreamer: ok but every system i've ever used puts entries for swap in fstab [12:04] ok === luser [n=xyz@84-74-187-201.dclient.hispeed.ch] has joined #ubuntu [12:04] it's not in there now .. === vindrake [n=vindrake@AMontpellier-257-1-98-211.w86-219.abo.wanadoo.fr] has joined #ubuntu === drayen__ [n=drayen@ip-89-168-32-108.cust.homechoice.net] has joined #ubuntu === EbabiL [n=asdsa@85.108.108.178] has joined #ubuntu [12:05] tobias: try booting with the vga=ask option [12:05] dreamer: my clean install of edgy put an entry in for me === dj_baggio [n=dj_baggi@yk66.internetdsl.tpnet.pl] has joined #ubuntu [12:05] tobias, do you have an issue logged in /var/log/messages telling more about the nature of the problem by the way? [12:06] tobias: booting in single-user mode is a good alternative to recovery [12:06] coz_: hello, i spoke to u the other day about installing beryl etc? [12:07] Are there any Open Source web browsers aside from the Mozilla stuff and Konq? === [Nige] [n=nige@203-206-34-228.dyn.iinet.net.au] has left #ubuntu ["Leaving"] [12:07] e_machinist: do you mean not based on their technology? [12:07] e_machinist, epiphany,galeon === MikeyMike [n=mikeymik@ip70-179-218-46.dl.dl.cox.net] has joined #ubuntu === MikeyMike [n=mikeymik@ip70-179-218-46.dl.dl.cox.net] has joined #ubuntu [12:08] i have a question about firefox [12:08] anyone up [12:08] MikeyMike: ask away [12:08] MikeyMike, State the nature of your problem [12:08] neil__: yes, not based on their technology. [12:08] hmm, I have a Q about FF to: can I use all my windows-settings in linux ? [12:09] haha you know... i come in here regularly and i totally asked to ask a question.... haha i feel dumb [12:09] anyway. === Pensacola [n=pensacol@dyn85-aud.nbw.tue.nl] has joined #ubuntu [12:09] my problem is i installed a couple firefox extentions and uninstalled them... and they're still 'there' [12:09] MikeyMike: isn't it the point of this channel/ to ask questions? ;) [12:09] haha yes [12:09] they all had to do with autoscrolling [12:09] I'm having some problems configuring ubuntu to connect to my wireless school network [12:10] i didnt realize firefox had autoscroll built in [12:10] netpython: The only thing in messages when trying ctrl+alt+f1-6 is "Loading R300 Microcode" ... The screen gets all screwed up like a bad graphics driver or something ... that's it then. I can still switch back to ctrl+alt+f7 luckily! [12:10] im using firefox 1.5.07 === pc3 [n=pc3@222.124.224.99] has joined #ubuntu [12:10] basically i've found that my about:config has a lot of bullcrap in it and i want to clear out the extentions [12:10] entries [12:11] quick question: how is it called ubuntu's graphical partitioner (which package is it)? [12:11] neil_: There MUST be an alternative to rebooting when I just hung up my X-server ... [12:11] anyone know? [12:11] tobias, after ctrl-alt-f1 a alt-f7 without ctlr is enough :-) What driver do you use? === pc3 is now known as cWe_PiNkErZzZ [12:11] hey whats up if I try remove a mod with rmmod modulename, it says it isnt module or something like that [12:11] floating: does "modprobe -r modulename" produce the same output? [12:11] or not found even if it was on lsmod list [12:11] tobias: can you Ctrl-Alt-F1 and kill from there? [12:11] yea [12:11] if anyone knows just say my name in in #firefox as well [12:12] whats the difference doing /sbin/rmmod modname === comX [n=uranus@e182039049.adsl.alicedsl.de] has joined #ubuntu === cWe_PiNkErZzZ is now known as cWe_ImOeTzZzZ [12:12] neil_: No. ctrl+alt+f1 just brings up a messed-up screen... [12:12] floating: don't know if there is a difference, just taking a stab here :P [12:12] neil_: As do f2-6 [12:13] i ll try the sbin when i be able to try it out next time === hwt [n=hwt@curb.thorkildssen.com] has joined #ubuntu [12:13] tobias when did y ou install the os === Oni-Dracula [n=oni@68-189-172-052.dhcp.gnvl.sc.charter.com] has joined #ubuntu [12:13] hi, i'm having problems getting fglrx to run on my newly installed edgy. [12:14] could it be that i'm missing some packages? [12:14] netpython: Right now I'm using the regularly 'ati' driver shipped with edgy ... but I used 'fglrx' on my dapper->edgy upgraded box. Same problem there. [12:14] i have restricted-modules and restricted-modules-common, in addition to the fglrx-drivers. === zerosmoke [n=zerosmok@200.38.248.230] has joined #ubuntu [12:14] hwt have you taken a look at all the how tos for this [12:14] coz_: The edgy I'm using right now? 12h ago... [12:14] tobias, and it was a clean install? === Undersound [n=chatzill@61.190.65.46] has joined #ubuntu [12:15] coz_, upgrade [12:15] upgrade === rambo3 [n=stone123@c-caf871d5.027-6-6b73641.cust.bredbandsbolaget.se] has joined #ubuntu [12:15] coz_: URL? [12:15] coz_: Yes, I downloaded the iso again, burnt it, checked the md5 after burning ... everything was ok. [12:15] hwt, hold on let me look === Kannix [n=jens@xdsl-87-79-218-22.netcologne.de] has joined #ubuntu === Adn1 [n=ubuntu@p54A5120B.dip0.t-ipconnect.de] has joined #ubuntu === C-O-L-T [i=None@89.34.166.178] has joined #ubuntu [12:16] does ldap use tcp or udp by default? [12:16] hi here I'm again :) I could bring my wlan to work [12:16] hwt here is a starting point for you http://ubuntuforums.org/showthread.php?t=291464&highlight=fglrx+beryl [12:16] Hi all! [12:17] lol why is Adna still here and I'm no Adn1? [12:17] now [12:17] oh, so the fglrx install isn't straight forward anymore? [12:17] I found a DVD-RAM disk and wanted to use it for backup. Did anybody ever use a DVD-RAM under Ubuntu and can tell me, how I format/access/write on one? [12:17] so, does anyone if/how I can import all my windows-firefox-configs ? === SubNet [n=SubNet@dslb-084-056-146-055.pools.arcor-ip.net] has joined #ubuntu [12:17] hwt, well i am not skilled with this so my suggestion is to google sorry === bibal [n=bibal@ip-81.net-81-220-2.versailles.rev.numericable.fr] has joined #ubuntu [12:17] Daverocks: I might have to remove this bcm43xx driver that is alternatively installed(i guess) I remember doing lsmod, and seeing many modules, that might be associated with this mod or so, do you think I might need to remove more than exactly this mod [12:18] driver=mod [12:18] no idea, sorry :( === maxb [n=maxb@puma-aaisp.mxtelecom.com] has joined #ubuntu === comX [n=uranus@e182039049.adsl.alicedsl.de] has left #ubuntu ["Ex-Chat"] === spyder404 [n=bilou404@102.95-90-202.mana.pf] has joined #ubuntu [12:19] but now I've got another problem I wanna install ubuntuu but this installation-agent of ubuntu doesnt get my partitions right. it sais 91 GB are not used but cfdisk and fdisk in the console show it right?!? === cWe_ImOeTzZzZ [n=pc3@222.124.224.99] has left #ubuntu ["Leaving"] [12:19] Adn1, /msg nickserv ghost yournick yourpass should kill the phantom connection [12:19] In Dapper's XWindows, holding down Ctrl+Shift and typing hex digits inserted that character code. This has mysteriously stopped working in Edgy. Does anyone know about this, or the name of the component which provides such behaviour? === spanglesontoast_ [n=edd@eddland.plus.com] has joined #ubuntu === Griver [n=Griver@81-231-250-204-no52.tbcn.telia.com] has joined #ubuntu === spyder404 [n=bilou404@102.95-90-202.mana.pf] has left #ubuntu [] === spyder404 [n=bilou404@102.95-90-202.mana.pf] has joined #ubuntu [12:20] maxb, it needs to be initiated with "u" before the hex digits now === Ifrit [n=exstatic@aworklan025162.netvigator.com] has joined #ubuntu [12:20] yoplaroom !! [12:20] and the component is gtk [12:20] a fart !! === kintaro0e [n=kintaro0@203.177.138.178] has joined #ubuntu [12:20] oups !! === zerosmoke_ [n=zerosmok@200.38.248.230] has joined #ubuntu [12:20] hi all ! === sittisal [n=sittisal@host87-107-dynamic.17-87-r.retail.telecomitalia.it] has joined #ubuntu [12:20] what's up !! === bugz_ [n=bugz@adsl-69-235-200-232.dsl.irvnca.pacbell.net] has joined #ubuntu === Lynvingen [n=christia@wlan-gw.hig.no] has joined #ubuntu [12:21] what's news !! [12:21] someone alive ? [12:21] Juhaz: Thanks!... if it requires, "u", then is there any way to get Ctrl+Shift+C to be passed through as a normal keypress, for apps like thunderbird, which map that to a useful function? [12:21] we're all DEAD [12:21] tobias: i'm using the ati driver in xorg with xorg's aiglx for my ATI9200 based card. i had to reboot to single-user to fix xorg.conf after i enabled AGPFastWrite [12:22] :) === Kosmos [n=kosmos@wlan-gw.hig.no] has joined #ubuntu [12:22] hav a good tim !! === spyder404 [n=bilou404@102.95-90-202.mana.pf] has left #ubuntu [] === bogdanp9 [n=bogdanp9@rof76-1-82-233-230-62.fbx.proxad.net] has left #ubuntu [] [12:23] maxb, I would assume that's the whole reason for the change, and those keypresses should now pass through automatically === morphish [n=morfic@sourcemage/mage/morfic] has joined #ubuntu === Hoxzer is perverted [12:23] Unfortunately, no. === joshmoore [n=josh@p85.212.29.249.tisdip.tiscali.de] has joined #ubuntu === apokryphos [n=apokryph@87-194-86-227.bethere.co.uk] has joined #ubuntu === reZo [n=reZo@124.197.8.13] has joined #ubuntu [12:26] has anyone noticed of their GNOME desktop starts a little faster with avahi-daemon configured and running? [12:26] s/of/if/ === spanglesontoast_ [n=edd@eddland.plus.com] has left #ubuntu ["Ex-Chat"] [12:27] I've a problem with edgy and a custom kernel : I've build my custom kernel with the same configure of 2.6.17-10-generic and add only one option ( Compile the kernel with debug info ) and I hadn't remove anything, all works fine slash screen and all the peripherals but if I boot in console nothing is visible expect a blinking cursor and resolution 1400x1050 (setuped via vga=0x348 at kernel boot parameters) doesn't working [12:27] maxb, ctrl+shift+a works for me in firefox and thunderbird, this is in fc6, not edgy, but should be the same... === rraphink [n=raphink@ubuntu/member/raphink] has joined #ubuntu [12:28] Juhaz: Interesting... you're right. C-S-A does work, but C-S-C doesn't. [12:28] I didn't find any menu entry with c-s-c in tb, what should it do? [12:28] or is it from extension? [12:28] so, does anyone know if/how I can import all my windows-firefox-configs ? === slulic [n=slulic@193.198.2.9] has joined #ubuntu === tannerld [n=tanner@adsl-068-209-251-067.sip.asm.bellsouth.net] has joined #ubuntu === ba5e [n=willmc@c-e002e255.133-9-64736c11.cust.bredbandsbolaget.se] has joined #ubuntu === Dimensions [n=filter@bb-87-80-0-37.ukonline.co.uk] has joined #ubuntu === sc4ttrbrain [n=nobody@KHP059138070148.ppp-bb.dion.ne.jp] has joined #ubuntu === boni [n=boni@202.141.130.198] has joined #ubuntu [12:30] dreamer: did you try copying your windows profile into ~/.mozilla/firefox/ ? [12:31] hi my firefox crashes every time i open any page it doesn't stays for more than few seconds is there any other web browser i can download ? === selinuxium [n=james@83.105.52.226] has joined #ubuntu [12:31] i even removed and re downloaded fire fox but doesn't work === timhaughton [n=timhaugh@82-69-2-150.dsl.in-addr.zen.co.uk] has joined #ubuntu [12:31] dooglus: not yet :# === nanda [n=nanda@host86-143-231-158.range86-143.btcentralplus.com] has joined #ubuntu === niktaris [n=nitkaris@ppp246-065.dsl.hol.gr] has joined #ubuntu === worldcitizen [n=Miranda@59.144.240.250] has joined #ubuntu === coz_ [n=coz_@pool-70-17-176-216.pitt.east.verizon.net] has left #ubuntu ["Leaving"] [12:32] are there anywhere firefox extensions in .deb format ? === cemil [n=cemil@defiant.wavecon.de] has joined #ubuntu [12:32] dreamer: something like: cp -r /mnt/c/Documents\ and\ Settings//Application\ Data/Mozilla/Firefox/Profiles/*.default ~/.mozilla/firefox/ [12:32] dreamer: (once you've got your windows C drive mounted as /mnt/c, of course) [12:33] niktaris, Not AFAIK. Why do you need them? [12:33] webben, I wanted them installed system-wide === kyaneos [n=kyaneos@84.77.22.240] has joined #ubuntu [12:34] niktaris: ah... yeah, I think there's an extension to help you with that, but no debs AFAIK. === CheshireViking [n=Inter@i-195-137-101-182.freedom2surf.net] has joined #ubuntu [12:34] webben, what extension ? === Eleaf [n=ethan@69.39.23.241] has joined #ubuntu === elro [n=ldr@idea13.plus.com] has joined #ubuntu [12:35] niktaris: not sure ... I suspect it's probably not worth it [12:35] it might be easier to create a add user script which installs them [12:35] when a new user is created [12:36] niktaris: can you install the extensions into /usr/lib/firefox/extensions/ ? === GrantG [n=GrantG@unaffiliated/GrantG] has joined #ubuntu [12:36] niktaris: some extensions are available in the repositories which do exactly that. for example: [12:36] !info mozilla-imagezoom [12:36] mozilla-imagezoom: Mozilla context menu option to zoom current image. In component universe, is optional. Version 0.2.5-1 (edgy), package size 68 kB, installed size 272 kB [12:37] Juhaz: It's "Mark folder as read" [12:37] niktaris, http://lwn.net/Articles/186663/ might help === render [n=render@213-140-21-234.fastres.net] has joined #ubuntu [12:38] niktaris: available packages are: firefox-dom-inspector, firefox-greasemonkey, firefox-themes-ubuntu, firefox-webdeveloper, mozilla-biofox, mozilla-bookmarksftp, mozilla-checky, mozilla-ctxextensions, mozilla-diggler, mozilla-imagezoom, mozilla-livehttpheaders, mozilla-mozgest, mozilla-nukeimage, mozilla-stumbleupon, mozilla-tabextensions, and mozilla-venkman === Vorbote [n=jehoel@unaffiliated/vorbote] has joined #ubuntu === multichil [i=multichi@nova.brewery.b33r.net] has joined #ubuntu === syock [i=proxyuse@221-186-8-83.ip1.george24.com] has joined #ubuntu === manux [n=manux@84-72-114-130.dclient.hispeed.ch] has joined #ubuntu === sittisal [n=sittisal@host87-107-dynamic.17-87-r.retail.telecomitalia.it] has joined #ubuntu === NET||abuse_ [n=lukeab@217.67.143.170] has joined #ubuntu === MistaED [n=mistaed@87.212.233.220.exetel.com.au] has joined #ubuntu === elro [n=ldr@idea13.plus.com] has left #ubuntu [] [12:39] dooglus, are those packages kept properly up to date do you know? === timhaughton [n=timhaugh@82-69-2-150.dsl.in-addr.zen.co.uk] has joined #ubuntu === Hobbsee [n=Hobbsee@CPE-124-189-12-73.nsw.bigpond.net.au] has joined #ubuntu === manux [n=manux@84-72-114-130.dclient.hispeed.ch] has joined #ubuntu [12:40] webben: I doubt it. they're in ubuntu universe... [12:41] yeah ... in that case I'd tend to prefer the latest xpi === kintaro0e [n=kintaro0@203.177.138.178] has joined #ubuntu [12:41] Hello some one knows how this can be resolved when client try to attempt ppp connexion over my linux box ,? [12:41] Cannot determine ethernet address for proxy ARP === rc-1 [n=rc-1@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu === gorilla [n=gpatters@ppp234-3.static.internode.on.net] has joined #ubuntu [12:43] webben: for instance, the first one I checked, image zoom is 0.2.5 in the repository and 0.2.7 on https://addons.mozilla.org/firefox/139/ . 0.2.7 was released Sep 26, 2006, about 2 weeks ago. [12:43] sorry, about 6 or 7 weeks ago! === wolki [n=wolki@client418.sg.fr.studentenwohnheim-bw.de] has joined #ubuntu [12:43] hmmm ... not great but could be worse [12:43] perhaps apt-get source [12:44] dooglus, thanks [12:44] and replace the xpi [12:44] dooglus: didn't work :S === Elischa [n=rassihu@M3785P009.adsl.highway.telekom.at] has joined #ubuntu === Jaak [n=ernst@elanser.demon.nl] has joined #ubuntu === abattoir [n=abattoir@cm238.omega16.maxonline.com.sg] has left #ubuntu ["Konversation] [12:44] then I removed the old profile .. and now it says Firefox is already running :/ === surface [n=surface@60.49.116.156] has joined #ubuntu [12:45] dreamer: rename the profile you copied to be exactly the same as the old profile you removed. firefox is expecting your profile to be called .default [12:45] hhmmm no sound :( i checked and appears sound card is plugged in right [12:45] maxb, http://www.mozilla.org/support/thunderbird/keyboard says it's just shift+c in linux [12:45] dooglus: aarg, don't know what it was called :s [12:45] dreamer: reading ~/.mozilla/firefox/profiles.ini will tell you [12:45] and sb audigory is detected in device manager === irtool [n=irtool@p508C51C3.dip.t-dialin.net] has joined #ubuntu [12:45] dreamer: the 'path=' bit === [irtool] [n=irtool@p508C51C3.dip.t-dialin.net] has left #ubuntu ["Leaving"] [12:46] er .. I already replaced the name in the ini with the new one :# [12:46] My Xserver crashes when i start flash 8 (editor), either flash does load eventually and all gnome menus become black, or i get ubu's login screen. [12:46] can anyone help me? === Alexandre_ [n=administ@201.19.7.48] has joined #ubuntu [12:46] the same happens with fireworks 8, not with dreamweaver [12:46] Jaak: flash 8 is a windows program isn't it? === alieni_ [n=magic@GYYMKDCXXX.dsl.saunalahti.fi] has joined #ubuntu === alieni_ [n=magic@GYYMKDCXXX.dsl.saunalahti.fi] has left #ubuntu ["Ex-Chat"] [12:47] dooglus: (using wine) === knubbe [n=knubbe@h32n1c1o1036.bredband.skanova.com] has joined #ubuntu [12:47] but xcrashes [12:47] http://www.debianadmin.com/ubuntu-edgy-upgrade-common-problems-with-solutions.html [12:47] Jaak: I see. [12:47] Juhaz: Thankyou extremely! I didn't even think they might have done something so bizarre as to have platform-specific keyboard shortcuts!! [12:47] http://www.debianadmin.com/ubuntu-edgy-upgrade-common-problems-with-solutions.html [12:48] Hello some one knows how to resolve this ? Cannot determine ethernet address for proxy ARP [12:48] dreamer: I'll try it here with my old windows firefox profile and see if that works. [12:48] hmz :/ === FidO-DidO [n=cedricmc@87.217.56.79] has joined #ubuntu [12:49] it says I should restart, I restarted X but that didn't work === rem__ [n=rem@bas-flu-adsl-dynip-214-219.vtx.ch] has joined #ubuntu [12:49] thnx for helping :) [12:49] does anyone know where the bluetooth configuration files are kept?? === SonicvanaJr [n=Garrett@unaffiliated/sonicvanajr] has joined #ubuntu [12:49] Hey...Since I upgrade to Edgy Evolution keeps on freezing. Anyone else had that problem...anything that can be done ? [12:49] Hiya ... again ... I have installed mozilla and it got installed but doesn't start while firefox crashes after few seconds [12:50] maxb, probably a workaround due to the gtk previously stealing those keys, guess it could/should be changed again in thunderbird now that that's no longer an issue... [12:50] i mean where are the bluetooth configuration files on Dapper?? === pianoboy3333 [n=alex@ool-43567d61.dyn.optonline.net] has joined #ubuntu [12:50] dreamer: I see the same error - that firefox is in use (it isn't) === h-bomb [n=someone@cpe-70-114-205-48.houston.res.rr.com] has joined #ubuntu [12:51] i am looking for a gnome kindoff Kbluetooth-server [12:51] dooglus: hmmm [12:52] dreamer: I'll work out what's wrong - give me a minute [12:52] :) [12:52] alsamixer says 00 on the master volume control, please help, i have no sound [12:52] hi i have having a issue getting wireless to work on my dell b130 inspiron. i installed the drivers via ndiswrapper and when i sudo modprobe ndiswrapper, i get this - FATAL: Error inserting ndiswrapper (/lib/modules/2.6.17-10-generic/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Invalid argument. Im at a loss as what to do, im searched all over the forums....any ideas? [12:52] any one around to help at all or what ? [12:53] rc-1: Did you try increasing the master volume from alsamixer?? === ChaKy [n=chaky@0-59.dsl.iskon.hr] has joined #ubuntu [12:53] dooglus, ps waux |grep firefox ,kill -9 and start firefox again ? [12:54] it says 65 65 [12:54] dooglus: I just removed the old ~/mozilla/firefox/ and copied my windows Firefox to it, I just need to rename the folder to see what happens .. [12:54] anyone on renaming folders? :# [12:54] rc-1, pressing m is enabling === trixer [n=maik@80.243.52.130] has joined #ubuntu [12:54] or use sudo killall firefox === DerD [n=derd2@p54B3E631.dip.t-dialin.net] has joined #ubuntu === trixer [n=maik@80.243.52.130] has left #ubuntu ["Verlassend"] [12:54] firefox: no process killed [12:55] dreamer, ps waux |grep firefox ,kill -9 and start firefox again ? [12:55] dreamer: sudo mv folder newfolder [12:55] Dimensions: that for renaming also ? [12:55] when i press m it goes from 00 to MM === petula [n=petr@adsl-ova159-118-244-84.bluetone.cz] has joined #ubuntu [12:56] netpython: que? .. too much new commands :P [12:56] im using edgy btw === Paddy_EIRE [n=ubuntu@host81-129-244-159.range81-129.btcentralplus.com] has joined #ubuntu [12:56] dreamer, pd waux |grep firefox [12:56] err ps === Przemcio78 [n=pm@83.2.19.132] has joined #ubuntu [12:56] can I fix an Edgy upgrade with a dapper live cd === C-O-L-T [i=None@89.34.166.178] has left #ubuntu [] [12:57] netpython: what do I do with the output ? [12:57] and: how to rename that folder? === ryu [n=chris@unaffiliated/ryu] has joined #ubuntu === alluc [n=alluc@194.206.158.130] has joined #ubuntu [12:57] dreamer, pastebin [12:57] I'ts one line :P [12:57] dreamer 7970 0.0 0.1 2744 792 pts/1 R+ 11:56 0:00 grep firefox [12:57] good the grepping process === NET||abuse__ [n=lukeab@86.43.66.72] has joined #ubuntu [12:57] so firefox isn't running :-) [12:57] hehe === mumbles-zzz-off is now known as mumbles-zzz [12:58] anyone? [12:58] ok, but I need to rename this folder of my win-FF to see if that works .. [12:58] may i ask in nautilus i want right-click-mouse; send and i want mozilla not evolution where is setting for this feature? === Mez [n=Mez@ubuntu/member/mez] has joined #ubuntu === Q-FUNK [n=q-funk@dsl-hkigw8-feb1fb00-83.dhcp.inet.fi] has joined #ubuntu [12:58] dreamer, try to run firefox from command prompt [12:58] boni, the master volume is at 100 what to try now === KillerDemon [n=hetisnui@h140058.upc-h.chello.nl] has joined #ubuntu [12:59] boni, and nothing is muted [12:59] netpython: first I want to rename the folder [12:59] Firefox to firefox [12:59] good [12:59] anybody familiar with iwconfig that would know how to increase the sensitivity of a wifi card? [12:59] rc-1: Still there is no sound??? === maram_ [n=marcelo@200.127.24.79] has joined #ubuntu === BoggsBeer is now known as Deaigo [12:59] netpython: but how :$ [12:59] dreamer, mv [01:00] no sound :( [01:00] mv: target `firefox/' is not a directory: No such file or directory === nanda [n=nanda@host86-143-231-158.range86-143.btcentralplus.com] has joined #ubuntu [01:00] aah, / too much :P [01:00] rc-1: How did this sound problem start?? [01:00] baah, now it says it's running again :S [01:00] after upgrading to edgy I get to the login screen and when I log in it only loads a few services all that I have is my mouse cursor and a blank background [01:01] rc-1, the volume can be at 100% but is the controll enabled? (press m key in alsa thingy) === seraphim [n=seraphim@e179133071.adsl.alicedsl.de] has joined #ubuntu === Yancho [n=yancho@195.158.87.23] has joined #ubuntu [01:01] hi === frinov [n=frinov@203.114.50.15] has joined #ubuntu [01:01] can someone please advise me on my wifi issue? [01:01] hi [01:01] I got a new mouse but edgy doesn't recognise it [01:01] any ideas? [01:02] nanda:from which country did red hat originate? === mumbles-zzz is now known as mumbles [01:02] dreamer: got it :) === patrick_ [n=patrick@84-72-114-130.dclient.hispeed.ch] has joined #ubuntu [01:02] usa? [01:02] I dunno [01:02] lol [01:02] yes its enabled [01:02] germany? [01:02] dooglus: HOW? :o [01:02] dreamer: run a "chmod -R u+w .default" to make the profile writable! [01:02] ok ! === ChaKy [n=chaky@0-59.dsl.iskon.hr] has joined #ubuntu [01:02] Intel ICH6 === mathrick is now known as mathrick|away === denver [n=denver@12.107.36.226] has joined #Ubuntu [01:03] Chip: Analog Devices AD1980 [01:03] dooglus:ch country did red hat originate? [01:03] niru: um - usa? === ayaa [n=fourat@196.203.53.221] has joined #ubuntu [01:03] um? [01:03] /part/part [01:03] dooglus: YAY !!!!!! :D [01:04] I even have all my plugins now I think === sebmo1 [n=bres@90.144.38.35] has joined #ubuntu === sebmo1 [n=bres@90.144.38.35] has left #ubuntu [] [01:04] many many thonx dooglus :D [01:04] rc-1, lsmod |grep snd_ich === render [n=render@213-140-21-234.fastres.net] has joined #ubuntu [01:04] dreamer: good, isn't it? the problem is, your windows partition was mounted readonly, so when you copied the files, the copies were read-only, too, which meant firefox wasn't able to mark the profile 'in use', so it thought it must already be in use... [01:04] anyone fancy helping me fix my edgy upgrade [01:05] :) === patrick_ [n=patrick@84-72-114-130.dclient.hispeed.ch] has left #ubuntu ["Quitte"] === gemeindebau [n=chatzill@d54C10A89.access.telenet.be] has joined #ubuntu === sithgunner [n=sithgunn@l203156.ppp.asahi-net.or.jp] has joined #ubuntu [01:05] Paddy_EIRE: i don't know if i can be much help to you [01:05] after upgrading to edgy I get to the login screen and when I log in it only loads a few services all that I have is my mouse cursor and a blank background [01:05] Paddy_EIRE: did you take a backup? [01:05] http://www.debianadmin.com/ubuntu-edgy-upgrade-common-problems-with-solutions.html [01:05] not really [01:06] ok, time for next class :) [01:06] later all :) [01:06] bye === patrix [n=patrix@84-72-114-130.dclient.hispeed.ch] has joined #ubuntu [01:06] niru: Red Hat was founded by entrepreneur Marc Ewing in 1993. read http://www.salon.com/tech/view/1999/10/04/marc_ewing/ [01:06] Paddy_EIRE: is there any way you can now? such as create a tar file of your home directory and then copy it to a USB drive or something? === f4bien [n=fabien@host9-122.pool8250.interbusiness.it] has joined #ubuntu === patrix [n=patrix@84-72-114-130.dclient.hispeed.ch] has left #ubuntu ["Quitte"] === samigaru [n=samigaru@218.93.201.146] has joined #ubuntu [01:07] dooglus:so He is from US [01:07] ben_underscore: well there is other such things that I wish to keep that are not in my /home directory [01:07] Paddy_EIRE, if you can get into the main desktop then you should be able to log in via the console..... [01:07] Paddy_EIRE: because i would suggest that and then do a fresh install of ubuntu and then copy your backed up home directory and restore it === agy [n=anton@194.215.226.98] has joined #ubuntu [01:07] hello all; i must be doing something wrong because i am totally unable to play xvid movies (in avi container). i think i followed about every instruction i could find, and still totem gives me that errormessage about missing plugins. can anybody guide me through the necessary checks to see if i actually did install everything? thanks === patrixx [n=patrixx@84-72-114-130.dclient.hispeed.ch] has joined #ubuntu [01:07] niru: apparently so. but in 1995 Red Hat was bought out by ACC Bookstores, run by a Canadian, Bob Young [01:07] Paddy_EIRE: true - there always are [01:08] ben_underscore: I have cd-r and dvd+r [01:08] Paddy_EIRE, from the console, mount the usb drive - storage device and copy everything there. === makro [i=felin@hopeatilhi.cs.tut.fi] has joined #ubuntu [01:08] k [01:08] niru: its corporate headquarters are in Raleigh, North Carolina [01:08] Paddy_EIRE do you have a second machine set up? [01:08] no [01:08] valehru: can you burn to dvd+r from a command line :-) [01:08] niru: see also http://en.wikipedia.org/wiki/Red_Hat [01:08] ben_underscore: how [01:09] ben_underscore, not that I last looked.. [01:09] :) === commy [n=commy@84-72-1-164.dclient.hispeed.ch] has joined #ubuntu [01:09] Paddy_EIRE: how for what? === niktaris [n=nitkaris@ppp246-065.dsl.hol.gr] has joined #ubuntu [01:09] the dvd command line [01:09] dooglus:ok [01:09] netpython, that doesnt do anything :( === sithgunner [n=sithgunn@l203156.ppp.asahi-net.or.jp] has left #ubuntu [] === SirKillalot [n=sirk@dslb-084-056-077-164.pools.arcor-ip.net] has joined #ubuntu === Yancho [n=yancho@195.158.87.23] has joined #ubuntu [01:10] Paddy_EIRE: also make sure you run a md5sum on your TAR file you create and then use that again to compare it to the file after you copy it back and forth so it is exactly the same file === dxdemetriou [n=dxdemetr@dsl136.netway.com.cy] has joined #ubuntu === commy [n=commy@84-72-1-164.dclient.hispeed.ch] has joined #ubuntu [01:10] Paddy_EIRE: you cannot burn DVDs on the comand line :-( [01:10] ben42, yes you can [01:10] ben-uthat is [01:10] doesn't cdrecord work for burning dvds? [01:10] is it possible for me 2 download the edgy iso from this livecd and use my other drive to burn it [01:10] underscore even [01:11] ben_underscore, yes you can, === defrysk does it all the time === tijn_tux [n=Rupert@a82-92-35-21.adsl.xs4all.nl] has joined #ubuntu [01:11] valehru: i stand corrected [01:11] anyone have an idea to get sound to work, not musting anything and volume at 100 === n3c [n=eric@n3c.e-xdb.net] has joined #ubuntu [01:11] ben_underscore, anything can be done via the command line, even cure world peace....you can not however burn a dvd with a read only drive however. === fluxi [n=fluxi@37.124-244-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu === dseazrca [n=dsewnr@mail.cna.isu.edu.tw] has joined #ubuntu === starkruz1 is now known as starkruzr [01:12] valehru: is it possible for me 2 download the edgy iso from this dapper livecd and use my other drive dvdrw to burn it [01:12] Paddy_EIRE needs to archive off his files to DVD from the command line so he can do a fresh install of edgy === melvin [n=chatzill@60.52.29.198] has joined #ubuntu === phanter [n=patrick@c120246.upc-c.chello.nl] has joined #ubuntu [01:13] Paddy_EIRE, you can burn iso with cdrdao but you have to make a small TOC file === BWD [n=BWD@pdpc/supporter/student/bdotson] has joined #ubuntu [01:13] hi people, how can I check why my sound card is not working (command line) [01:13] defrysk: so If i download the iso where does it get stored === Dimensions [n=filter@bb-87-80-0-37.ukonline.co.uk] has left #ubuntu [] [01:13] i'm using acer aspire 5050 : how to repair sound problem and wireless [01:13] could some1 please file a bug report: Ubuntu won't reg. my usb keyboard nor mouse [01:13] I have problem with /dev/dsp. every restart swaps the dsp and dsp1 and I don't know each time what dsp is for soundcard nd what for tvcard [01:14] defrysk: im running from a dapper livecd [01:14] Paddy_EIRE, you have to mount a partition on your harddrive to download it too === lazzareth [n=lazzaret@dsl-58-6-3-28.wa.westnet.com.au] has joined #ubuntu [01:14] too = to === doctorow [n=doctorow@68-65-221-88.vnnyca.adelphia.net] has joined #ubuntu === Ekinoks [n=ekinoks@137.10.119-80.rev.gaoland.net] has joined #ubuntu [01:15] defrysk: could you help me do this [01:15] Paddy_EIRE: and your feisty install is not working off the hard drive? can you boot into safe mode? === viviersf [n=cain@196.44.1.98] has joined #ubuntu [01:15] Is there any way to define the dsp for soundcard and the dsp1 for tvcard? [01:15] Paddy_EIRE, listen to ben_underscore for now please [01:15] When I woke up this morning, /dev/sda1 was 100 percent full -- I'm running Edgy on a ThinkPad T60p. === zerosmoke [n=zerosmok@200.38.248.230] has joined #ubuntu [01:16] Paddy_EIRE: sorry that should have been edgy, not feisty. stupid names!! === thandavarayan [n=thandava@port-83-236-142-210.static.qsc.de] has joined #ubuntu [01:16] lol ben_underscore === pianoboy3333 [n=alex@ool-43567d61.dyn.optonline.net] has joined #ubuntu === Elektrochelovek [i=papai_ni@88.119.35.202] has joined #ubuntu === FirstStrike [n=firsty@nv-76-4-226-104.dhcp.embarqhsd.net] has joined #ubuntu [01:16] Can anyone help me figure out why /dev/sda1 is sitting at 100 percent full? I can't even boot my machine [01:17] boing boing on the bridge. [01:17] Q-FUNK Yup -- any ideas about /dev/sda1? [01:17] dxdemetriou: you need to put a udev rule in /etc/udev/rules.d I think. at least, that's how I stopped eth1 and eth2 randomly swapping over at each boot [01:18] umm...did you mess around in the partitioner lately? [01:18] zerosmoke Nope [01:18] doctorow: probably because your /var/log or /tmp is full === boni [n=boni@202.141.130.198] has left #ubuntu [] === fyrestrtr [n=burhan@pdpc/supporter/student/fyrestrtr] has joined #ubuntu [01:18] ben_underscore: im creating a partition for the edgy live cd download as I do not have my original at hand === dimko [n=Dimitrio@noname-213.5.142.46.acn.gr] has joined #ubuntu [01:18] doctorow: what sort of hardware is it? SCSI disk as rootis not so comon these days. [01:19] Paddy_EIRE: ah. === Toma- [n=lin4me@124-168-95-54.dyn.iinet.net.au] has joined #ubuntu === MisterC [n=skal@ADijon-258-1-49-90.w90-6.abo.wanadoo.fr] has joined #ubuntu === chuckyp [n=chuckyp@adsl-75-36-112-138.dsl.bcvloh.sbcglobal.net] has joined #ubuntu === raghu206 [n=raghu@202.63.100.54] has joined #ubuntu [01:19] Q-FUNK It's a ThinkPad t60p [01:19] dooglus, how can I do that? :) === wombo [n=wombo@mail.rhodeswaterside.net] has left #ubuntu [] === compengi [n=compengi@212.36.207.118] has joined #ubuntu [01:20] how to installl aiglx in edgy for intel machines === dimko [n=Dimitrio@noname-213.5.142.46.acn.gr] has left #ubuntu [] [01:20] Q-FUNK I've emptied out /tmp and I'm looking at /var/log now -- it seems like it's only 8912k [01:20] raghu206, /j #ubuntu-xgl === mr_lampe_ [n=lampe@dslb-084-056-131-248.pools.arcor-ip.net] has joined #ubuntu [01:20] i need help getting skype to work on ubuntu edgy thinkpad 570. audio capture is not working [01:20] !skype > frinov [01:20] help i have no sound [01:21] !sound > rc-1 [01:21] chuckyp, it fails for arecord as well [01:21] Paddy_EIRE: my advice is to do nothing until you can get near an external hard drive or vice versa. then archive off all the files you need to the external drive, making sure to take md5sums of each TAR file and checking the files have not been corrupted. then wipe your drive and do a fresh install of edgy. it's a pain but the cleanest approach [01:21] ben_underscore: if this partiton creates properly is it possible to mount my other edgy install and copy my home dir over [01:21] it is a config problem with alsa.conf [01:21] Q-FUNK I cd'ed to /var and did a du -k [01:21] frinov, check out levels with alsamixer [01:21] doctorow: did it empty anythng? next, I'd try 'apt-get clean' to empty the APT cache. [01:21] that is generated by edgy === Fergy [n=Fergy@a82-92-232-156.adsl.xs4all.nl] has joined #ubuntu [01:22] chuckyp, i can record if i arecord -D plughw:0,0 but not if arecord without -D [01:22] and now i have to go to bed. it is late. === BeanBag [n=IT@dsl-241-121-117.telkomadsl.co.za] has joined #ubuntu [01:22] good luck [01:22] chuckyp, thanks :) [01:22] are you familiar with alsa.conf, that is where the issue is coming from [01:22] Q-FUNK df still says /dev/sda1 is 100 percent full [01:22] frinov, did you try alsamixer === christefano [n=christef@pool-68-163-171-23.bos.east.verizon.net] has joined #ubuntu === egon_spengler [n=egon@pool-71-98-65-181.ipslin.dsl-w.verizon.net] has joined #ubuntu [01:22] chuckyp, yes, i mentioned that i can record with arecord -D plughw [01:23] Lahey, how did you get on? [01:23] doctorow: assides from the percentages shown, do the disk size and used size differ? [01:23] frinov, hrm... well i'm not to familiar with alsa.conf [01:23] rc-1, np [01:23] ok === drayen__ [n=drayen@host86-136-10-175.range86-136.btcentralplus.com] has joined #ubuntu [01:23] frinov, hrm.. why is alsa.conf not in /etc [01:23] Q-FUNK Yes -- 1k-blocks = 10080488, Used=9893636 [01:24] chuckyp, on edgy, it is in /usr/share/alsa [01:24] frinov, thats annoying [01:24] hi folks. I'm going through my command history and it appears that one of my colleagues installed MySQL and PHP5 over my the installation I already had. could this be the cause of why my /phpinfo.php file is spitting out errors? === cccharles [n=fred@rrcs-67-79-17-190.sw.biz.rr.com] has joined #ubuntu [01:24] frinov, yeah I found it just wierd that its not in /etc [01:24] huh? at me? chuckyp === mumbles is now known as mumbles-out [01:24] frinov, yes its wierd that in edgy its in /usr/share/alsa instead of in /etc [01:25] doctorow: another trick to try would be to delete the APT package lists in /var/lib/apt/lists/ [01:25] chuckyp:Does ubuntu edgy support tamil and other indian languages when fonts are installed [01:25] I've used other distros. Any convenient way to get a command line "mail" command in ubuntu? === Psy-X [n=Psy-x@adsl-158-226-224.asm.bellsouth.net] has joined #ubuntu [01:25] anyway, i need to find out how to make skype be able to read from the default plughw [01:25] niru, yes [01:25] Q-FUNK Can I just rm -r /var/lib/apt/lists without b0rking anything? [01:26] ailean:can I get the list of indian languages that ubuntu will support [01:26] doctorow: erm.. nope. you'd rather delete the individual files [01:26] niru, all major indian languages are supported === pianoboy3333 [n=alex@ool-43567d61.dyn.optonline.net] has joined #ubuntu [01:26] Q-FUNK Which files? [01:26] niru, 2 mins [01:26] ailean:ok I shall wait [01:26] doctorow: in that directory, with file names reminescent of URL [01:26] niru, no idea perhaps search for rosetta in the forums. [01:26] !in [01:26] Sorry, I don't know anything about in - try searching on http://bots.ubuntulinux.nl/factoids.cgi [01:27] Q-FUNK It looks like the dir is only 27MB [01:28] any help would be appreciated here. I've been sandbagged with this assignment and have been having problems at every turn. [01:28] doctorow: which is still sizable enough. I'd say try deleting them just to make space. it should at least reboot fine afterwards. [01:28] niru, tamil has about 20% support, but that takes care of most of what you will see. you can help with the translation effort if you like! === Gasten [n=martin@h18n4c1o1095.bredband.skanova.com] has joined #ubuntu [01:28] Q-FUNK What do you mean by "reminiscent of a URL?" === Bergcube [n=Bergcube@193.215.130.108] has joined #ubuntu [01:28] would installing MySQL and PHP5 over previous installations cause problems? [01:28] niru, although it is only 20%, the rest of the untranslated tamil is in lesser-known packages === |_SpY_| [n=opa@LAN.orangestock.com.br] has joined #ubuntu [01:28] hmmm i changed from onboard device to SB adgiry in both volume control and volume preferences, but alsamixer is still showing my integrated card help plz [01:28] /wg 30 [01:28] christefano, yeah why don't you remove the old versions first. [01:29] <|_SpY_|> where i can find php.ini on ubuntu? [01:29] it's too late for that, I'm afraid [01:29] niru, . :) [01:29] ailean:But at present I want to know which other languages also does ubuntu support [01:29] niru, https://launchpad.net/distros/ubuntu/+translations === Bergcube [n=Bergcube@193.215.130.108] has left #ubuntu ["http://www.ubuntu.com/"] [01:29] I'm going through my command history and it appears that one of my colleagues installed MySQL and PHP5 over my the installation I already had by apt-getting without looking first === daschl [n=michi@193.170.109.226] has joined #ubuntu [01:29] |_SpY_|, /etc/php# somewher ein there. === jrib [n=jasonr@unaffiliated/jrib] has joined #ubuntu [01:30] |_SpY_|, or just locate php.ini [01:30] <|_SpY_|> chuckyp thankz [01:30] <|_SpY_|> how i locate the file? === atlas95 [n=atlas@AVelizy-152-1-72-38.w83-204.abo.wanadoo.fr] has joined #ubuntu === viviersf [n=cain@196.44.1.98] has joined #ubuntu [01:30] |_SpY_|, "locate php.ini" you may have to update the locate database first using "sudo updatedb" [01:31] would apt-get install -f help christefano? [01:31] |_SpY_|, updatedb will take a few minutes [01:31] rc-1, is your onboard device still enabled in bios? [01:31] ailean: wee! [01:31] christefano, how did they install it? [01:31] cccharles, I'm familiar with apt-get [01:31] sorry Q-FUNK? [01:31] doctorow: e.g. in mine, I have filenames like fi.archive.ubuntu.com_ubuntu_dists_edgy-updates_universe_binary-i386_Packages [01:31] christefano, from source? [01:31] christefano: sorry, no insult intended [01:32] netpython, let me check, ill brb! [01:32] I'm just unsure if there will be problems now that my colleague installed over the previous installation [01:32] rc-1, k [01:32] ailean: whatever language that was, it looks fun [01:32] she used "apt-get install mysql" and "apt-get install php5" === serengeti [n=slawek@62.17.17.142] has joined #ubuntu [01:32] Q-FUNK So anything with "ubuntu.com" in the name? [01:32] christefano, well if youc an find out how he installed it we could help you uninstall it. If you find a source directory just go in there and sudo make uninstall [01:32] Q-FUNK, oh, that's Tamil :) [01:32] doctorow: yup === ChaKy [n=chaky@0-59.dsl.iskon.hr] has joined #ubuntu [01:32] christefano, if he used apt do sudo apt-get remove --purge php or whatever the package he installed is. [01:33] christefano, if he used a .deb you can dpkg -r whatever.deb [01:33] ailean: I'll have mine with curry and rice, thanks. ;) === zerosmoke [n=zerosmok@200.38.248.230] has joined #ubuntu [01:33] Q-FUNK, behave yourself [01:33] chuckyp: I'm wondering if installing MySQL and PHP5 over a previous installation is a no-no. [01:33] christefano, probably [01:33] Q-FUNK Deleted all the files in the dir and sda1 is *still* full! [01:33] to be honest, I need the grounds for getting her off of this server === leonel [n=leonel@189.155.119.220] has joined #ubuntu [01:33] niru, Punjabi, Hindi, Tamil, Nepali, English, Bengali, Gujurari, and Urdu as far as i can see [01:34] ailean:ok [01:34] christefano, change passwords that will get them off. [01:34] ailean:I am also searching [01:34] doctorow: run a "df ." in the directory. it'll tell you whether the directory is on /dev/sda1 or not [01:34] oh if it were only that simple... [01:34] doctorow: (see the 'mounted on' field) [01:34] doctorow: yup. df is sily like that. the system won't acknowledge the space that you freed until you have rebooted [01:34] niru, it is easy to help translate. please consider helping out. [01:34] Q-FUNK It is [01:35] Anybody know of a command line "mail" command available for ubuntu similar to that in other distros? [01:35] Q-FUNK Rebooting now (it's a different PC) [01:35] ailean:ya I have registered myself as a member for translation [01:35] niru, if you speak these languages, they badly need work, and you will be helping India by doing it. === GrimWald [n=Telepath@acces1042.res.insa-lyon.fr] has joined #ubuntu === rc-1 [n=rc-1@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu [01:35] niru, thanks :) [01:35] cccharles: install package 'mailx' === G-net|Gilnim [n=gilnim@unaffiliated/gilnim] has joined #ubuntu [01:35] ailean:Are you from india [01:35] thx, dooglus [01:35] niru, no, i'm from scotland [01:35] ailean:oh [01:35] can't you tell by the accent? [01:35] ;) [01:35] lol [01:36] it was on, just turned it off but still no sound [01:36] cmon aileen :-) === dinamizador [n=dinamiza@83.230.234.241] has joined #ubuntu === cccharles [n=fred@rrcs-67-79-17-190.sw.biz.rr.com] has left #ubuntu [] [01:36] netpython, aileAn :) i'm a guy [01:36] aye laddie [01:36] the song :-) === darkangel [n=darkange@ip229-179-59-62.adsl.versatel.nl] has joined #ubuntu [01:36] alsea mixer giving right card now [01:36] Q-FUNK: 'df' will report the space as being free as soon as it is free. rebooting doesn't affect what df reports, unless it also affects how much space is free [01:36] rc-1, good chap === [GuS] [n=LnX@unaffiliated/gus/x-663402] has joined #Ubuntu [01:37] dooglus: I've had too many instances where deleting masses of files still doesn't report any space as freed to beleive that. [01:37] i think i messed it up by having that on during install :( === ulinskie [n=ulinskie@203.111.235.144] has joined #ubuntu [01:37] it's not mass...it's density [01:38] anybody got a good tutorial on scribus [01:38] :D [01:38] thanks chuckyp [01:38] Q-FUNK: if you delete a file which is open, then the space won't be freed until the file is closed. but that's not df's fault. [01:38] Q-FUNK It's still 100 percent [01:38] geser beam [01:38] dooglus: that, I know. [01:39] which file system? [01:39] when installing ubuntu-server, does the computer not support audio then (since it did work under ubuntu desktop)? [01:39] doctorow: hm. does syslog show anything about e.g. the filesystem check having failed and root having been mounted as read-only? [01:39] Q-FUNK: could it be the something is writing to the filesystem constantly, so as soon as you delete a file, the space gets used again? === Khamael [n=raphael@73.80-202-81.nextgentel.com] has joined #ubuntu [01:39] phanter, you installing it right on the drive or in a virtual drive? === cain_ [n=cain@196.44.1.98] has joined #ubuntu [01:39] same question to doctorow... [01:39] zerosmoke: right on the drive [01:39] dooglus: that would be the case with e.g. syslog, yes [01:40] it replaced my old debian server (who had also perfect sound support) [01:40] Q-FUNK dooglus Rebooting now -- I'll let you know in a sec [01:40] not sure, phanter...any server xperts? === lazzareth [n=lazzaret@dsl-58-6-3-28.wa.westnet.com.au] has joined #ubuntu === Toma- [n=lin4me@124-168-95-54.dyn.iinet.net.au] has joined #ubuntu === poptao [n=poptao@222.93.99.196] has joined #ubuntu === raghu [n=raghu@59.92.208.110] has joined #ubuntu [01:41] ulinskie, http://wiki.scribus.net/index.php/Main_Page === Sonic|Laptop [n=garrett@unaffiliated/sonicvanajr] has joined #ubuntu [01:42] FIXED IT :))))) needed to enable digital outline jack, and god i think i busted my eardrums when i did [01:42] lol === Magankie [n=omagan@80.67.96.65] has joined #ubuntu [01:42] congrats ^_^ [01:43] Q-FUNK What am I looking for in Syslog? === andy_ [n=andy@213-156-52-121.fastres.net] has joined #ubuntu [01:43] hm. === Q-FUNK tries to remember what a failed rw mount produces in syslog === Magankie [n=omagan@80.67.96.65] has joined #ubuntu === TheMutu [n=Caos@88.241.231.32] has joined #ubuntu [01:45] heyo [01:45] i have "cat /proc/cpuinfo | grep 'model name' | sed -e 's/.*: //' | tail --lines=1" but want to take (r) out of the result as well how would i do this? === Sonic|Laptop [n=garrett@unaffiliated/sonicvanajr] has joined #ubuntu === M0E-lnx [n=moe@adsl-70-240-108-184.dsl.hstntx.swbell.net] has joined #ubuntu [01:47] Q-FUNK Is it worth fscking the disk? === Paddy_EIRE [n=ubuntu@host81-129-244-159.range81-129.btcentralplus.com] has joined #ubuntu === rc-1 [n=rc-1@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu === SunFish7 [n=SunFish7@cpc4-oxfd1-0-0-cust870.oxfd.cable.ntl.com] has joined #ubuntu [01:48] what is this? apache2: Could not determine the server's fully qualified domain name, using 127.0.1.1 for ServerName === charles_ [n=charles@222.124.224.99] has joined #ubuntu === the-mr-freak [n=chris@pD9E0B8A7.dip.t-dialin.net] has joined #ubuntu [01:48] what other music players (except for xmms) can i try that will be simular to Winamp5 === rc-1 [n=rc-1@c-24-125-35-80.hsd1.va.comcast.net] has left #ubuntu ["Leaving"] [01:48] nes_: use a FQDN instead, such as www.microsoft.com === atlas95 [n=atlas@AVelizy-152-1-72-38.w83-204.abo.wanadoo.fr] has joined #ubuntu === dxdemetriou [n=dxdemetr@dsl136.netway.com.cy] has left #ubuntu ["Ex-Chat"] === achraf [n=achraf@i01m-62-35-5-133.d4.club-internet.fr] has joined #ubuntu [01:49] hows that? [01:49] hey guys, I wish to download the edgy livecd iso... I have made a 2 gb ext3 partition to download to how can I mount this volume i think its hda3 [01:49] deeem: nice example ;-) [01:49] BeanBag, beep-media-player and amarok in player only mode === rc-1 [n=rc-1@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu [01:49] is it worth switching to edzio? [01:49] defrysk: thanks, will give it a try [01:50] Paddy_EIRE: mkdir /mnt/iso; mount -t ext3 /dev/hda3 /mnt/iso [01:50] Q-FUNK Grepping syslog and syslog.0 for "full" "only" "mount" doesn't produce any clues [01:50] Paddy_EIRE, mkdir [01:50] deeem, what do u mean? === bettyboop1975 [n=bettyboo@213-140-21-233.fastres.net] has joined #ubuntu [01:50] mount /dev/dhwhatever [01:50] another question, well 2 actually: 1. Is Defcon (the windows game) available for linux yet? and how and where can i get wine64bit on my pc? [01:50] cd [01:50] and then download it [01:51] nes_: you've probably put a fully qualified domain name in ServerName but it can't be resolved locally or via DNS === g8m [n=evil@cp82868-a.dbsch1.nb.home.nl] has joined #ubuntu === Rumpalisti [n=Rumpalis@dsl-083-102-036-37.lohjanpuhelin.fi] has joined #ubuntu [01:51] how? === lazzareth [n=lazzaret@dsl-58-6-3-28.wa.westnet.com.au] has joined #ubuntu === BeanBag [n=IT@dsl-241-121-117.telkomadsl.co.za] has left #ubuntu [] === phanter [n=patrick@c120246.upc-c.chello.nl] has left #ubuntu [] === Olathe [n=Olathe@12-201-73-22.client.mchsi.com] has joined #ubuntu === atlas95 [n=atlas@AVelizy-152-1-72-38.w83-204.abo.wanadoo.fr] has joined #ubuntu [01:54] doctorow: dmesg | less [01:54] What is a layer-2 network? [01:54] How do I ensure that Ubuntu is using SiS integrated video drivers ? [01:54] is it worth switching to edgy? [01:54] nes_: if you have "SeverName www.mydomain.com" then "127.0.1.1 www.mydomain.com localhost" in /etc/hosts would be a start [01:54] Q-FUNK Oki -- What should I look for? [01:55] nes_: but that's an illustrative hack only. [01:55] ok [01:55] doctorow: filesystem chekcs that report a failure === b_52Free [n=skimo@adsl196-236-57-217-196.adsl196-10.iam.net.ma] has joined #ubuntu [01:56] Olathe: check for 'Driver "sis"' in /etc/X11/xorg.conf === ender [n=Julian@gate.technotrend.de] has joined #ubuntu [01:57] Q-FUNK Nothing interesting under "file" or "fail" or "check" [01:57] doctorow: what are you trying to do? === bRutEado [i=vjszkqa@bl9-202-253.dsl.telepac.pt] has joined #ubuntu === Mutton [n=Mutton@h69-129-38-38.69-129.unk.tds.net] has joined #ubuntu [01:58] dooglus : It has Driver "vesa". Should I edit it to have "sis" instead ? === Rendergraf [n=usuario@190.38.1.252] has joined #ubuntu === yacc [n=andreas@h1634.serverkompetenz.net] has joined #ubuntu === ruschi [n=ruschi@p5081574A.dip.t-dialin.net] has joined #ubuntu [01:59] cpk1: cat /proc/cpuinfo | grep 'model name' | sed -e 's/.*: //' -e 's/(R)//g' | tail --lines=1 === itodd [n=itodd@chargedsoftware.com] has joined #ubuntu [01:59] Olathe: I have an SiS video card. I've copied my xorg.conf here: http://s89213869.onlinehome.us/xorg.conf [01:59] dooglus When I woke up this morning /dev/sd1 was 100 percent full -- when I rebooted, it wouldn't boot [01:59] dooglus So now I'm trying to figure it out === GrimWald [n=Telepath@acces1042.res.insa-lyon.fr] has joined #ubuntu [02:00] doctorow: what is /dev/sd1? [02:00] Hi guys, is it ok, i.e. the good practise to comment out the lines of the modules I don't want to load at boottime in /etc/modprobe.d/aliases ? === Q-FUNK [n=q-funk@dsl-hkigw8-feb1fb00-83.dhcp.inet.fi] has left #ubuntu [] [02:00] dooglus Sorry, /dev/sda1 -- according to df, that's / [02:01] dooglus : Alright. Thanks :) [02:01] for example I don't want joydev to be loaded in my kernel [02:01] ruschi: better to blacklist it. [02:01] but this module is loaded at boottime [02:01] ok, how do I do it [02:01] !blacklist [02:01] To blacklist a module, edit /etc/modprobe.d/my_blacklist and add "blacklist modulename" to the end of that list [02:01] doctorow: ok. how about running this to list all recent big files? sudo find / -xdev -type f -size +1M -mtime -1 -exec ls -ld {} ';' [02:02] cool, I will do that [02:02] thanks === Khamael [n=raphael@73.80-202-81.nextgentel.com] has joined #ubuntu === Director [i=vjszkqa@bl9-203-148.dsl.telepac.pt] has joined #ubuntu === ench0 [n=encho_@86.42.137.146] has left #ubuntu ["Ex-Chat"] [02:03] dooglus It lists pkgcache.bin, slocate.db, messages.0, kern.log.0 [02:03] doctorow: and that's all? [02:03] dooglus The big one (4982349) is slocate.db [02:03] dooglus Yes === Director [i=vjszkqa@bl9-203-148.dsl.telepac.pt] has joined #ubuntu === SeanTater [n=sean@cpe-069-132-052-158.carolina.res.rr.com] has joined #ubuntu === duke [n=duke@dslb-088-072-254-059.pools.arcor-ip.net] has joined #ubuntu [02:04] doctorow: that's only 4MB. how big is the partition? [02:04] dooglus df says it's 10080488 === lastnode [n=lastnode@unaffiliated/mahangu] has joined #ubuntu === thegve [n=germ@80.112.194.210] has joined #ubuntu [02:04] doctorow: "df -h /" will show it in a human-readable form [02:04] fyrestrtr: thanks! i will try that === wheelswitch [n=alex@203.129.53.215] has joined #ubuntu === PablO__ [n=linux@181.Red-81-33-239.dynamicIP.rima-tde.net] has joined #ubuntu [02:05] dooglus It's 9.7G, used 9.4G, but use% = 100 === hh [n=hhr@0x3e42a191.adsl.cybercity.dk] has left #ubuntu [] [02:05] ubuntu won't see my usb kbd nor mouse (HP wireless). What to do? === schwarzesschaaf is now known as Schwarzesschaaf [02:06] fyrestrtr: great it worked thank you very much [02:06] doctorow: ok, so do a sudo du -m / | grep '^[0-9] [0-9] [0-9] [0-9] ' [02:06] doctorow: that'll list all the directories which use more than 1GB === manu_ [n=ravelli@lts1pc7.epfl.ch] has joined #ubuntu === manu_ [n=ravelli@lts1pc7.epfl.ch] has left #ubuntu ["Quitte"] === rambo3 [n=stone123@c-caf871d5.027-6-6b73641.cust.bredbandsbolaget.se] has joined #ubuntu [02:07] I have one problem with my live cd with the Kubuntu Linux 6.06. It never start the cdrom when the computer iniciate. I already create a diskette with the boot menu but when i select the cd it give me a error. What can i do? [02:07] dooglus That's a HUGE list -- like 40 screens === Kim^J [n=Hagbard@firewall1.driftbolaget.se] has joined #ubuntu [02:07] dooglus wait, no, I mistyped === Khamael [n=raphael@73.80-202-81.nextgentel.com] has joined #ubuntu === ruda [n=ruda@201.90.153.205] has joined #ubuntu === test3421 [n=test@220-245-202-201-wa-pppoe.tpgi.com.au] has joined #ubuntu [02:09] dooglus OK, I may have it. I usually have a second internal HDD mounted -- though I never got it to work right, I can't cd to it -- that I tried setting up a daily backup to a couple days ago === pc3 [n=pc3@222.124.224.99] has joined #ubuntu [02:09] dooglus Ysterday I removed the disk, and I think the backup ran [02:09] doctorow: ok, so the backup filled up the disk instead of writing to the other disk [02:09] dooglus Wait wait no [02:10] What could be the reason for 'ssh -X' not setting DISPLAY? [02:10] dooglus Just looked at the partial backup I see from your last command -- it's only 4MB [02:10] dooglus False alarm [02:10] dings, you need to enable another Xserver for ssh [02:10] dooglus The list of the large dirs doesn't turn up much of anything [02:11] doctorow: what about doing this? echo $(sudo du -m / | sort -n | tail -n 5) === znejk [n=znejk@h14n9-mkb.ias.bredband.telia.com] has joined #ubuntu [02:11] doctorow: that'll print the 5 biggest directories on one line, suitable for pasting here. === ruda [n=ruda@201.90.153.205] has left #ubuntu ["Leaving"] [02:11] is there a easy way to find out what a certain module is good for? === henke1 [n=tiago@200.206.138.201] has joined #ubuntu [02:12] like I have no idea whether I need 'af_packet' [02:12] chuckyp: not sure I got that. I have a client with X.org running and a server with X11forwarding. But "client> ssh -X me@server" does not set DISPLAY on the server. [02:12] dings, actually enable X forwarding on the server. [02:12] I doubt it [02:12] hrm.. === henke1 [n=tiago@200.206.138.201] has left #ubuntu [] [02:12] I have one problem with my live cd with the Kubuntu Linux 6.06. It never start the cdrom when the computer iniciate. I already create a diskette with the boot menu but when i select the cd it give me a error. What can i do? [02:12] dooglus I'm actually using a different machine for IRC, so I can't paste (the broken machine has no network access). But I ran the cmd and the only things it found were some of my music directories in /home [02:12] doctorow: what numbers do you see? === luser [n=xyz@84-74-187-201.dclient.hispeed.ch] has joined #ubuntu [02:13] dings, just make sure you edit etc/ssh/sshd_config and X forwarding is enabled on the server. Then maybe try "ssh -X -2 username@server" === salus [n=sal@host-217-59.despolnet.pl] has joined #ubuntu === coz_ [n=coz_@pool-70-17-176-216.pitt.east.verizon.net] has joined #ubuntu [02:13] dooglus /home/doctorow/Music/audiobooks 41061 /home/doctorow/Music 65614 /home/doctorow/65623 /home 75070 / [02:13] chuckyp: It is and I only allow -2. [02:13] is there a way to remove an entry in the "open with" menu? [02:14] dings, try xhost + on the server and try it again. [02:14] dooglus But /home is on sda3, not sda1 [02:14] chuckyp: eh.. suddenly realised that I probably need some x.org packages on the server [02:14] dings, I mean on yoru system === allen [n=allen@203.84.184.246] has joined #ubuntu [02:14] chuckyp: Im not about to open X on my system === coz_ [n=coz_@pool-70-17-176-216.pitt.east.verizon.net] has left #ubuntu ["Leaving"] [02:15] dings, yeah lol you need those. But if you get a cannot display error you can try "xhost +" to release the local box. [02:15] wow... [02:15] doctorow: grrr. [02:15] Ubuntu is the sexiest operating system ever [02:15] chuckyp: that is not an option [02:15] dooglus Tell me about it! I'm really getting desperate === Olathe [n=Olathe@12-201-73-22.client.mchsi.com] has joined #ubuntu [02:15] dooglus I can't afford to be offline today [02:15] dings, well you need x packages on the server [02:15] How do I find out what a module is basically good for? === Gosc [n=Gosc@dhe33.neoplus.adsl.tpnet.pl] has joined #ubuntu [02:16] chuckyp: remember wich, I shouldn't need to acctually run an xserver. [02:16] doctorow: ok... echo $(sudo du -mx / | sort -n | tail -n 5) [02:16] doctorow: the -x will stop it looking at other partitions === manu_ [n=ravelli@lts1pc7.epfl.ch] has joined #ubuntu === norbert [n=geoff@124.157.200.154] has joined #ubuntu [02:16] dings, No you don't actually need to run X but you need the X environment on the server. Just don't launch it. [02:17] dooglus "419 /usr/local 1454 /usr/lib 1844 /usr/share 408 /usr 4575 /" [02:17] ruschi, what are you trying to do exactly? [02:17] doctorow: you typoed? [02:17] chuckyp: isn't there some "-xorg-common" or something that would be enough? === cappicrd [n=cappicar@user-0calcop.cable.mindspring.com] has joined #ubuntu [02:17] dings, there should be let me check [02:17] i have a message like this: xserver-xorg: failed to load bitmap module,how to know wich package does provide that module ? [02:17] I have a default kernel, I used to have a homebrew with almost everything I need statically compiled in === JuJuBee [n=JuJuBee@greenville.k12.ny.us] has joined #ubuntu [02:18] now I use the distrokernel because it ist really good === MenZa [n=menza@unaffiliated/menza] has joined #ubuntu [02:18] !info xorg > dings [02:18] xorg: X.Org X Window System. In component main, is optional. Version 1:7.1.1ubuntu6 (edgy), package size 17 kB, installed size 44 kB [02:18] unfortunately it loads tons of modules I don't need [02:18] like sony_acpi [02:18] dooglus No, I don't think so [02:18] dooglus Just double-checked [02:18] so I blacklist these modules === lazzareth [n=lazzaret@dsl-58-6-3-28.wa.westnet.com.au] has joined #ubuntu [02:18] no one answered in ubuntu-xgl. shouldn`t it be safe to run the official nvidia drivers with beryl on edgy now? my beryl-manager freezes xorg [02:18] doctorow: you used "sort -n" in there? [02:18] ruschi, You want to list the modules? lsmod? [02:18] but some modules I don't know wheter I need them or not [02:19] I list them [02:19] I know [02:19] doctorow: if so, the numbers should be in ascending order. [02:19] Khamael, well beryl is still not stable. [02:19] all I want to know is what this modules does [02:19] ruschi, what is the name of it? [02:19] like ipv6 -- enabes the ipv6 stack [02:19] I want to build a new computer, but want to use officially supported hardware. Where Can I look up supported hardware like Mobo's, video cards etc... === tuopppi [n=tuomas@bb-81-175-154-133.dsl.phnet.fi] has joined #ubuntu [02:19] chuckyp: i see. the thing is, it worked perfectly with the nvidia beta drivers [02:19] ibm-acpi -- provides acpi for ibm thinkpads [02:19] JuJuBee, google for linuxcompatible === TobiF [n=Kanales@e180000167.adsl.alicedsl.de] has joined #ubuntu === Dasnipa` [n=Dasnipa@bravoseven.stev193.eiu.edu] has joined #ubuntu [02:20] window 2 [02:20] Is there a generic way to find out what a modules namdd xy does? [02:20] Khamael, I know there are issues with beryl and the latest release of the envy drivers. [02:20] whoops, sorry [02:20] ruschi, google. [02:20] dooglus I've triple-checked it and I think I got it right -- maybe you typoed? I have "echo $(sudo du -mx / | sort -n | tail -n 5) [02:20] the modules I wonder about is tc1100_wmi [02:20] ok [02:21] google is always a good friend but I was wondering whether there is a dokumentation on the system === syock [i=proxyuse@221-186-8-83.ip1.george24.com] has joined #ubuntu [02:21] doctorow: "1844 /usr/share 408 /usr 4575 /"? the 408 should be bigger than the 1844... [02:21] ruschi, i'm checking now but I dont' see anythign [02:21] chuckyp: how do I check what release I have? it just removed nvidia-glx with dist-upgrade, and installed a new nvidia driver after a "apt-get install nividia-glx" [02:22] ruschi, /usr/share/doc somewhere maybe [02:22] chuckyp: and everything seems to work, apart from beryl-manager === test3421 is now known as test3422 [02:22] Khamael, cat /etc/issue i think [02:22] dooglus Ah, I typoed with the output, sorry: "419 /usr/local 1454 /usr/lib 1844 /usr/share 4058 /usr 4575 /" === geokok [n=george@87.203.188.120] has joined #ubuntu [02:22] doctorow: either way, this is suggesting that you have less than 5GB used on that partition. yet 'df -h /' tells you you're using more? [02:22] dooglus Yes [02:22] well modprobe.d/aliases is not too bad [02:22] doctorow: and you ran some kind of fsck to check it? [02:23] dooglus No -- I don't really know how to use fsck [02:23] I have one problem with my live cd with the Kubuntu Linux 6.06. It never start the cdrom when the computer iniciate. I already create a diskette with the boot menu but when i select the cd it give me a error. What can i do? === tir [n=tir@pdbn-590d23d3.pool.einsundeins.de] has joined #ubuntu [02:23] chuckyp: that just says ubuntu 6.10 [02:23] I need a command to check the filesystemm for errors === samu [n=sam@svamppi.sby.abo.fi] has joined #ubuntu [02:23] doctorow: the fact that it says it's 100% full when it's only 97% full is to do with ext3 saving some 5% or so exclusively for root access, but that's not the only problem here === loutrine [n=lew~@static-203-192-64-14.sa.chariot.net.au] has joined #ubuntu [02:23] Khamael, you are running edgy [02:23] dooglus Can you walk me through a fsck maybe? [02:23] Khamael, 6.10 is the version of hte distro you are running. === dcordes [n=dcordes@dslb-084-062-016-122.pools.arcor-ip.net] has joined #ubuntu === dope [n=dope@70-20.202-68.tampabay.res.rr.com] has joined #ubuntu [02:24] chuckyp: I meant what nvidia release. I guess envy was a typo? [02:24] Khamael, oh you mena which version of nvidia === mendred [n=mendred@59.93.64.34] has joined #ubuntu [02:24] what's the best webcam program? [02:24] Khamael, do you have hte current one from the repos? [02:24] doctorow: me neither, sorry. I would guess it's a "sudo fsck.ext3 /dev/sda1" but you probably want something safer than my guesses when it comes to an operation like this... [02:24] Khamael, if so you can apt-cache showpkg nvidia-glx === joachim-n [n=joachim@AC8DB576.ipt.aol.com] has joined #ubuntu [02:24] What command can sheck the filesystem for errors? [02:24] yea [02:24] anyone? best webcame program? [02:25] can i access a webcam remotely? [02:25] doctorow: you probably have to boot from a live CD or something, because fsck won't work if the partition is mounted. [02:25] geokok: fsck === maxb [n=maxb@puma-aaisp.mxtelecom.com] has left #ubuntu ["Leaving"] [02:25] thanks === NET||abuse__ is now known as NET||abuse === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu [02:25] Khamael, if not ls /var/cache/apt/archives | grep nvidia [02:25] dope: you can access your box remotely with SSH [02:26] i'm having problems with my apt-get/dpkg whatever hanging when i try to install/remove packages === poptao [n=poptao@222.93.99.196] has left #ubuntu [] [02:26] dooglus Oki --booting from the livecd now [02:26] neil_: I cant run it cause it says the filsesystem is mounted.... [02:26] doctorow: you can "man fsck.ext3" and "man fsck" to see more [02:26] CarinArr, are you getting an error? [02:26] doctorow: I'll brb in 5 or 10 minutes === Kannix [n=jens@xdsl-87-79-218-22.netcologne.de] has joined #ubuntu [02:26] dooglus Thanks [02:26] geokok: umount it then [02:26] CarinArr, possibly try aptitude its better than apt-get atleast at handling dependencies. [02:26] chuckyp, no, it just hangs, using edgy [02:27] CarinArr, does it hang at the same place every time? === poopotootti [n=poopotoo@c193-229-37-194.elisa-laajakaista.fi] has joined #ubuntu === chuckyp is away: I'm away right now probably out smoking. [02:27] but its my root partition....can i do that? and if yes can it be done with one command for the current session only? [02:27] geokok: try fsck -N [02:27] chuckyp, sometimes it installs/uninstalls, but this is with lots of different packages.. not the same one [02:27] neil__: is there a way to check fat32 systems? [02:28] or even ntfs [02:28] it's always at "setting up xxxx..." or "removing xxxx... " === Kyral [n=kyral@ubuntu/member/kyral] has joined #ubuntu === geokok [n=george@87.203.188.120] has left #ubuntu [] === mby [i=mby@gandalf.ds5.agh.edu.pl] has joined #ubuntu === Ayabara [n=anr@194.196.35.3] has left #ubuntu ["Leaving"] [02:29] is there anyway i can extract a .deb from a package that is already installed in the system? [02:29] dcordes: you can check vfat certainly. i think you might need to install utilities to work with ntfs === eggzeck [n=exec@cpe-68-175-49-54.nyc.res.rr.com] has joined #ubuntu [02:29] for example, i have w32codecs installed on dapper, i want to extract the .deb to install on edgy (the dl site is being really slow) [02:29] how can i check vfat systems? [02:30] you can use /sbin/fsck.vfat === chuckyp is back (gone 00:02:59) === wglenncamp [n=wglennca@cblmdm72-240-87-29.buckeyecom.net] has joined #ubuntu === freeomen [n=ad@87.230.183.90] has joined #ubuntu [02:31] chuckyp, aptitude hangs as well === b_52Free [n=skimo@adsl196-184-54-217-196.adsl196-10.iam.net.ma] has joined #ubuntu [02:31] chuckyp: is there a way to check if my nvidia card works like it should? [02:31] CarinArr, hrm... thats wierd [02:32] i'm installing vmware and I got error that vmware module should installed before. Do I need to use 'make menuconfig' and recompile kernel ? [02:32] Hi, what is a good mp3 tagger that will let me name mp3's and rename the files themselves based on the tag's? I used to use musicmatch on windows, so something comparable to that, I've tried rythembox, but that doesn't seem to let me work on whole directory at once [02:32] it's a completely fresh install bar LDAP installed/configured for /home/ [02:32] chuckyp: no, I can't believe I need to have an xserver installed to provide x-forwarding. Are you sure? shouldn't it be enough with what on Debian would be xlibs? [02:32] CheshireViking: try easytag [02:32] Khamael, like a 3d test or something? What sort of issue are you having. [02:32] dings, whats the point of x forwarding if you have nothing to forward? [02:33] khamael: Thanks, i'll give it a go [02:33] i would like to use ubuntu. however, i hear a lot of people who got trouble with its package manager.. that to me is the most important peace of software an OS should have === SymmWork [i=aalston@192.48.253.7] has joined #ubuntu [02:33] !vmware > mby [02:33] chuckyp: I will have X applications forwarded to my local x-server [02:33] chuckyp: haven`t tested all that much, but my problem is that beryl-manager freezes my xorg [02:33] what's the deal? [02:33] chuckyp, it's not taking up cpu, just seems to be sat there waiting.. strace seems to show different things from one run to the next.. a lot of the time it hangs while waiting for whatever pid, the next it just says resource busy etc [02:33] dings, the server needs to be able to launch the x apps. [02:33] Lahey, u there? === windtw [n=wind@61.231.68.250] has joined #ubuntu [02:34] Khamael, hrm.. yeah I would keep checking in #ubuntu-xgl === The_9 [n=dfdf@a21126.upc-a.chello.nl] has joined #ubuntu [02:34] ok...i...got a cdburner to burn my iso images so i could run ubuntu...and...now i can't get cdburnerxp under wine to recognize my new writer...anybody suggest a good allround cd writer software for ubuntu? [02:34] zerosmoke, the default one. [02:34] zerosmoke, or growisofs === Onni [n=me@e248221.upc-e.chello.nl] has joined #ubuntu [02:34] zerosmoke, the one that comes with gnome is pretty good [02:34] you mean nautilus? === SirDevil1 [n=fordevil@uk2.tcompressor.com] has joined #ubuntu === dra [n=dra@p57A51C5B.dip0.t-ipconnect.de] has joined #ubuntu [02:35] zerosmoke, yes nautilus [02:35] !paste [02:35] pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (you can always find it in the channel topic, among other useful things) [02:35] ahhh [02:35] zerosmoke, just right click on the ISO file and select burn to disc [02:35] hmmm...ok brb === SirDevil1 is now known as SirDevil === Speckmade [n=chatzill@Ed370.e.pppool.de] has joined #ubuntu === allen [n=allen@203.84.184.246] has joined #ubuntu === brynk_ [n=gerrit@garrut.xs4all.nl] has joined #ubuntu [02:35] ! ? )) [02:35] well unfortunately...i wasted my extra discs trying to get a bootable disk...so now i have to go get some more empty ones so i can test it again...:p [02:35] anyone can help me with xchat?i can't see any users [02:36] allen, look tot he right [02:36] <--i don't see any users list [02:36] O_o [02:36] look what sir? [02:36] get a pack of cds, a lot cheaper [02:36] i get a pack of cds? XD [02:36] you have to go up to settings, preferences, then go to user list, in xchat [02:36] allen, look this way >>>> [02:36] wait [02:36] http://paste.ubuntu-nl.org/30743/ that's what strace says when it hangs removing the package [02:36] settings where is that [02:36] wtf is XD? [02:36] up [02:36] -> is empty [02:37] want a screenshot? O_o. [02:37] allen, try resizing that portion of the window [02:37] xchat view server settings window help === gargamel_IV [n=jacek@dvk193.neoplus.adsl.tpnet.pl] has joined #ubuntu [02:37] wait [02:37] allen, just outside the scroll bar [02:37] wait [02:37] i would like to use ubuntu. however, i hear a lot of people who got trouble with its package manager.. that to me is the most important peace of software an OS should have.. is that thing true [02:37] allen pull the scroller [02:37] on some docs, it says " at the boot prompt, use parameters : 'sata.i' to use a 2.4 kernel with sata drivers.", i dont know what to write on the brub menu, can you help me please ? [02:37] pull O_o;; === SirDevil [n=fordevil@uk2.tcompressor.com] has left #ubuntu [] === elias_ [n=elias@62.178.32.26] has joined #ubuntu [02:38] is that possible [02:38] it wont show still === poopotootti [n=poopotoo@c193-229-37-194.elisa-laajakaista.fi] has joined #ubuntu === viblizz [n=viblizz@195.159.99.194] has joined #ubuntu [02:38] allen, can you send a screenshot to imageshack.us or something? [02:38] holla back youngin [02:38] ok [02:38] wait [02:38] Hey boys, is there anyone dark here? [02:38] dark? [02:38] xD [02:38] dark? [02:38] i'm colored [02:39] only light [02:39] how to configure samba to make it actually available for file sharing === am [n=am@200.118.156.235] has joined #ubuntu [02:39] talking about dark soul [02:39] !samba > elias_ [02:39] viblizz: can you please take general chat to #ubuntu-offtopic [02:39] it seems it only works on loopback device by default [02:39] screenshot http://img374.imageshack.us/img374/1397/probcz3.png [02:39] viblizz, only you maybe [02:39] !samba | elias_ [02:39] elias_: samba is the way to cooperate with Windows environments. Links with more info: https://wiki.ubuntu.com/MountWindowsSharesPermanently http://help.ubuntu.com/ubuntu/serverguide/C/windows-networking.html Samba can be administered via the web with SWAT [02:39] wat do you think o.o [02:39] I need a bad boy === pc3 [n=pc3@222.124.224.99] has joined #ubuntu [02:39] bad wat xD [02:40] Khamael: Thanks for that, Easytag was exactly what I was looking for, much appreciated === mode/#ubuntu [+o gnomefreak] by ChanServ === viblizz [n=viblizz@195.159.99.194] has left #ubuntu [requested] === mode/#ubuntu [-o gnomefreak] by gnomefreak === cO_15th [n=pc9@222.124.224.99] has joined #ubuntu [02:40] CheshireViking: te nada ;-) [02:40] -_- === abes [n=abes@rn-v1w2a13.uwaterloo.ca] has joined #ubuntu [02:40] o.o === Simbarto [n=bartosch@dslc-082-082-081-074.pools.arcor-ip.net] has joined #ubuntu [02:41] allen, Resize the window so its not full screen. THen just outside the slider ont he right you mouse will turn to <-> move it inward it will reveal the userlist [02:41] hey i have a problem with madwifi === cO_15th is now known as ce_EnDuD [02:41] i cant build it === rauble [n=andrew@pool-71-254-252-161.hrbgpa.dsl-w.verizon.net] has joined #ubuntu [02:41] allen, you want <-> not >| [02:41] thats what I get: /lib/modules/2.6.15-27-386/build: No such file or directoryMakefile.inc [02:41] ok i want <-> [02:41] and also: /lib/modules/2.6.15-27-386/build is missing, please set KERNELPATH === allen needs >-< woops [02:42] any help? [02:42] i'm bored, no one wants to comment on my post [02:42] i resize it [02:42] \join #ccb [02:42] !wifi > abes [02:42] it only show -> === the-mr-freak_ [n=chris@pD9E0B8A7.dip.t-dialin.net] has joined #ubuntu === SirKillalot_ [n=sirk@dslb-084-056-068-044.pools.arcor-ip.net] has joined #ubuntu [02:42] Where should I put a command that I want to run every time the system starts up (not during login, but before) ? [02:42] allen, hrm... eSettings > prefernces > user list? [02:42] there is no one but me in #ccb [02:43] esettings o.o [02:43] Is /etc/rc.local acceptable for that ? [02:43] freeomen, what is #ccb? [02:43] freeomen: your post was great :-) === rjgonza [i=rjgonza@c-68-36-228-107.hsd1.nj.comcast.net] has joined #ubuntu [02:43] hmm [02:43] chuckyp, ask Simbarto.. he told me to join that channel [02:43] well gnomebaker seems good enough [02:43] Hey guys [02:43] freeomen, what was your post? === LockUp [n=mail@195.117.54.220] has joined #ubuntu [02:44] I need a program to export a document to PDF/X-1a format. Where can I found it? === quiet [n=quiet@unixcorps/staff/quiet] has joined #ubuntu === GrimWald [n=Telepath@acces1042.res.insa-lyon.fr] has joined #ubuntu === caprice [n=caprice@swla090.WLAN.Uni-Marburg.DE] has joined #ubuntu [02:44] hold on === Mogz [n=max@h138n5fls34o1041.telia.com] has joined #ubuntu [02:44] yo gonzo [02:44] i would like to use ubuntu. however, i hear a lot of people who got trouble with its package manager.. that to me is the most important peace of software an OS should have.. [02:44] is that true === grank [n=greg@81.130.203.231] has joined #ubuntu [02:44] LockUp, openoffice [02:44] bah [02:44] wont work [02:44] allen, dunno how did you install xchat? [02:44] O-o on the add/remove === phaedrus44 [n=michaels@rrcs-24-97-54-186.nys.biz.rr.com] has joined #ubuntu [02:45] Olathe: yes [02:45] Lahey [02:45] freeomen, no not true package manager is the best part [02:45] ill try this other client hmmm let me see === dorto [n=dorto@220.226.151.89] has joined #ubuntu [02:45] Alright, thanks [02:45] how can i get java in FF 2? [02:45] konversation [02:45] allen, well it should be there I dont' think there is a way to remove it. [02:45] yo [02:45] chuckyp, i don't disagree that it's the best.. i was talking about stability [02:45] hmmm this is weird === unreal [n=unreal@unaffiliated/unreal] has joined #ubuntu [02:45] yea Synaptic is great === scena [i=scena@209.42.211.129] has joined #ubuntu [02:45] synaptic is too big [02:45] dcordes: i use gcj/gij and gcjwebplugin [02:45] Lahey, how'd you get on? [02:46] chuckyp, in the forums, there are many post about people who had troubles [02:46] Supports OOo PDF/X-1a format (not PDF)? [02:46] http://ubuntuforums.org/search.php?searchid=9636722 [02:46] woah [02:46] i will use konversation [02:46] its showing [02:46] thanks chucky [02:46] freeomen, There are no stability problems with Dapper. Edgy on the other hand is just that Edgy mroe cutting edge software. [02:46] and you could always just install something like Automatix if you need to install something and don't know how to use synaptic - http://www.getautomatix.com/ [02:46] dont know how to use synaptic? heh [02:46] hehe === defrysk rjgonza no [02:47] !automatix [02:47] automatix is a script that tries to install some software, and often fails and breaks systems. We don't provide support for it, and we strongly discourage its use. [02:47] not automatix [02:47] neil__: uninstall jre then? [02:47] !automatix [02:47] oo sry bout that [02:47] automatix is not good [02:47] I never used it, just heard good things [02:47] wow, ive always had good luck w automatix [02:47] see [02:47] rjgonza, its not good so please dont advise it here [02:47] freeomen, have you read any of the posts? Most of those where caused by people interupting the package manager/ user error [02:47] that doesnt mean thats true for everyone === Poromenos [n=poro@ppp25-162.adsl.forthnet.gr] has joined #ubuntu [02:47] scena, it does what it promises. it's just when you want to do further things, it can muck some stuff up === pc3 [n=pc3@222.124.224.99] has joined #ubuntu [02:47] can someone help me with some ssh tunneling? [02:47] o hi wouldnt doubt it === edgarin [n=edgarin@216.230.150.7] has joined #ubuntu [02:48] freeomen, just use aptitude or synaptic and all will be good. [02:48] Lahey, you still there? how did you get on with installing ubuntu? [02:48] !ssh > Poromenos [02:48] does ubuntu supports plotter printers? [02:48] use apt [02:48] ailean: I DL the desktop cd and tried it out, i love it. Im going to install it on a second HD when i get back from school today [02:48] Lahey, cool, good luck [02:48] ive been converting Windows users to Ubuntu for three months [02:48] chuckyp: i actually need the setup :P [02:48] chuckyp, hmm, i didn't read them but when i saw it was common, i started thinkin maybe the PM is the problem === LockUp [n=mail@195.117.54.220] has left #ubuntu [] === charles_ [n=charles@222.124.224.99] has joined #ubuntu === Sby_Fitnes_Diran [n=pc1@222.124.224.99] has joined #ubuntu [02:48] Does anyone know of an application for developing Flash animation, or actionscript in Ubuntu? [02:49] i've been using synaptic, add/remove, apt-get [02:49] installing programs couldn't be easier [02:49] This chart shows Ubuntu getting more popular: http://www.google.com/trends?q=ubuntu [02:49] freeomen, Have you had any problems? === fabbione [n=fabbione@vpn-nat.fabbione.net] has joined #ubuntu [02:49] ailean: Thanks again for all your help, cant wait to get home and play with it some more [02:49] dcordes: i wouldn't. you should be able to find a browser plugin for jre [02:49] neil__: i install the packages you said and java still doesn't work [02:49] but stability must be taken into consideration [02:49] have any of you set up Ubuntu to act as a print server for Windows clients *without* using Samba [02:49] why without? [02:49] chuckyp, yeah.. the things i was using don't work anymore [02:49] any good documents on SSH port forwarding, then? [02:49] sorry to repeat myself, but i'm having problems with package management.. when i try to install stuff it hangs, when i try to uninstall it hangs again.. for example i try to install fluxbox and it hangs at "Setting up fluxbox..." in the end I have to kill it, and when trying to remove it it hangs at "Removing fluxbox... " this is happening with lots of different packages, not just fluxbox.. example: http://paste.ubuntu-nl.org/30743/ [02:49] dcordes: what does about:plugins show in firefox? [02:49] when i click on synaptic or add/remove, nothing shows up [02:49] Lahey, do you know how to send messages to individual people? [02:49] c ya guys later [02:49] freeomen, Are you running edgy? [02:50] rj: well 1, ive never been able to get samba/swat to work === akpowar [n=akpowar@62.181.57.12] has joined #ubuntu [02:50] rj: 2, ive also got to support somt legacy Unix systems that need to print to these servers as well === wishlog [n=newbie@h246228.resnet.cuhk.edu.hk] has joined #ubuntu [02:50] neil__: Flash and Default [02:50] freeomen, perhaps you have a hung process? Did you try looking at ps aux or system monitor to see if there is a hung pid [02:50] currently, ive got Mandriva print servers using CUPS-LPD [02:50] ubuntu LTS 6.06 [02:50] === icelight [n=astro@58.34.37.174] has joined #ubuntu [02:50] so Windows & Unix print to it via LPR [02:50] chuckyp, no.. but it happens even when i restart the computer [02:51] ailean: No it wont let me type in the window when you pm me [02:51] i need to keep the LPR support & find a nicer way to let Window print to it [02:51] neil__: libflashplayer.so libnullplugin.so [02:51] Is it possible to temporarily disable the shutdown/reboot funktionality from regular users in Ubuntu? I am asking this because I have some systems where I need to do some maintenance work. The users of these systems are allowed to use their workstations while I do the maintenance, but things will probably break if they were to shut down the system while I am running apt-get dist-upgrade or something like that. === kevb [n=kevb@194-247-224-55.dynamic.dsl.as9105.com] has joined #ubuntu [02:51] freeomen, well have you checked logs? To see what is happening? or top to see if the process is actually running. [02:51] chuckyp, did you get any problems at all? [02:51] compengi, check out http://www.linuxprinting.org/ [02:51] YW1lcmljYW4gRnVsbFM= === test3421 [n=test@220-245-202-201-wa-pppoe.tpgi.com.au] has joined #ubuntu === bplzip [n=bernie@cpe-24-24-46-226.rochester.res.rr.com] has joined #ubuntu === pc6 [n=pc6@222.124.224.99] has joined #ubuntu [02:51] tdn, they shouldn't be able to . Unless you gave them priveleges to do so. [02:52] chuckyp, i didn't know there were logs [02:52] freeomen, I've never had a problem with apt-get or aptiude === JDI [n=daniele@213-140-22-71.fastres.net] has joined #ubuntu [02:52] dcordes: it might me some alternatives-related problem [02:52] freeomen, /var/log [02:52] chuckyp, you're proving to me i'm dumb :P [02:52] anyone installed oracle express deb package on ubuntu? [02:52] freeomen, no you aren't dumb === Alan-D [n=AD@216.95.210.66] has joined #ubuntu [02:52] hey [02:52] dorto, no its never been done before. [02:52] chuckyp, i didn't look anywhere or try to fix it [02:53] i need a good ftp client [02:53] chuckyp, by anyone? [02:53] i'll try it again [02:53] icelight, ftp in terminal [02:53] ailean: This is what i get - Private messages from unregistered users are currently blocked due to spam problems, but you can always message a staffer. Please register! [02:53] dorto, i'm just messing with you. [02:53] dcordes: you could try dpkg-reconfigure gcjwebplugin [02:53] thanx chuckyp :) [02:53] i mean in x-windows [02:53] i need a ftp client in x-winodws [02:53] Lahey, okay, you need a different chat program :) no matter, i'll get back in touch with you [02:53] freeomen, yeah check there and see if system monitor shows a process hugn like synaptic or update-manager things of that sort. [02:53] chuckyp, they are allowed to shut down the computer via Gnome as regular users by default. This is a good feature because normally they need to be able to turn off the computer. But I just don't want them to do it while I am upgrading the system. [02:53] icelight, gftp [02:53] chuckyp, meh [02:53] how do i let qemu use actual network cards and no virtual net [02:53] icelight, firefox === dave_forthhack [n=dave@host81-129-15-240.range81-129.btcentralplus.com] has joined #ubuntu [02:53] firefo? === Jay_Dogg [n=jukka@a88-112-85-254.elisa-laajakaista.fi] has joined #ubuntu === neil__ has never heard of x-windows ;) [02:54] how to get it? === Gwildor [n=gwildor@h-66-134-148-176.sfldmidn.covad.net] has joined #ubuntu [02:54] tdn, hrm... === elate [n=elate@raptor.ukc.ac.uk] has joined #ubuntu === freeomen [n=ad@87.230.183.90] has left #ubuntu ["Leaving"] === Vaxu [n=vaxaren@adsl-36-5.regionline.fi] has joined #ubuntu [02:54] dammit, they say use Samba === segfault [n=nobody@c-68-33-214-39.hsd1.md.comcast.net] has joined #ubuntu [02:54] if i set CUPS up to share printers, can Windows use IPP? [02:54] icelight, firefox is your web browser ftp://123.123.123.123 === igor [n=igor@201.79.206.239] has joined #ubuntu [02:54] neil__: sudo dpkg-reconfigure gcjwebplugin nothing happens when i issue this command === selinuxium [n=james@83.105.52.226] has joined #ubuntu [02:55] dcordes: that's ok [02:55] ailean: i think i can fix it === cari_sohib_ce [n=pc2@222.124.224.99] has joined #ubuntu [02:55] ok [02:55] i see [02:55] ty [02:55] neil__: and it doesn't change anything === lastnode [n=lastnode@unaffiliated/mahangu] has joined #ubuntu === mikm[laptop] [n=michael@kron2-46-125.resnet.wisc.edu] has left #ubuntu ["rmmod] [02:55] is there a any text editor to program in Ubuntu....(C,C++,Python.....) ??? === _jellydonut_ [n=tom@c-68-49-138-210.hsd1.md.comcast.net] has joined #ubuntu [02:55] dcordes: does "which java" return anything [02:55] Ajunta === dou213_ is now known as dou213 [02:55] ailean: ill be back === Lahey [n=chatzill@CPE000d8846b4a2-CM000039050c63.cpe.net.cable.rogers.com] has left #ubuntu [] [02:55] i used kate in Kubuntu... [02:56] neil__: /usr/bin/java [02:56] igor: just kate === quiet [n=quiet@unixcorps/staff/quiet] has left #ubuntu ["Leaving"] [02:56] ye [02:56] dcordes: and "java -version" gives (not all of it) === valehru [n=valehru@221.201.158.64] has joined #ubuntu [02:56] B-Minus: but in gnome...instead gedit [02:56] hmm dunno im in kubuntu using kate :) [02:57] tdn, http://ubuntu.wordpress.com/2006/03/20/disable-shutdown-for-normal-users/ possibly this may be of use. You would have to undo what ever you do though to give them control back. [02:57] http://www.adultswim.com/adultswimfix/index.html says i need windows media player, any help? [02:57] [02:57] I upgraded to edgy and lost the spell checker in openoffice.org. I have language-pack-en, language-support-en and myspell-en-{gb,us}. Any ideas? === d33p__ [n=d33p@87.217.145.7] has joined #ubuntu [02:57] igor, vim [02:57] chuckyp, ok. Thanks. [02:57] [02:57] [02:57] neil__: 1.4.2-02 [02:57] wth? [02:57] dcordes: to set jre path for firefox act did you try upda-alternatives? === mode/#ubuntu [+o gnomefreak] by ChanServ === mode/#ubuntu [+b *!*@62.181.57.12] by gnomefreak === mode/#ubuntu [-o gnomefreak] by ChanServ [02:57] scena: Where is hte printer situated, on the Windows pc or Linux PC? [02:57] after reading many reviews on linuxquestions.org about harware compatibility, I am more confused. What Mobo works very well with ubuntu (planning on server)? [02:58] gnomefreak: ? upda-alternatives: command not found [02:58] Onboard video and sound would be fine. [02:58] gnomefreak: maybe he has an keyboard error :D [02:58] dcordes: update-alternatives [02:58] dcordes: sorry its sudo update-alternatives --config java [02:58] chuckyp: what comand i put to get C identation(colours, etc) in Vim === cari_sohib_ce [n=pc2@222.124.224.99] has joined #ubuntu [02:58] oh ok [02:58] dcordes: i was watching the troll seeing if he came back before i finished [02:59] is it known when skype will be added to edgy restricted repositories? [02:59] it gives me the option to chose between 5 alternatives [02:59] igor, no idea I don't use. [02:59] is there anyone here that uses madwifi? #madwifi doesnt seem to be any live [02:59] dcordes: use the one that says 1.5? [02:59] dcordes: the sun java one [03:00] igor, you could always install kate and continue to use that. [03:00] gnomefreak: a troll or someone who doesn't know how to configure his locale? :) [03:00] gnomefreak: does this also apply do ff2 ? [03:00] abes, lots of people === gnussbaum [n=gnussbau@pool-71-255-115-213.cncdnh.fios.verizon.net] has joined #ubuntu [03:00] !madwifi | abes [03:00] abes: Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs [03:00] neil__: a troll [03:00] chuckyp: ok...thanks.. === dope [n=dope@70-20.202-68.tampabay.res.rr.com] has joined #ubuntu [03:00] igor, aptitude install kate [03:00] gnomefreak: 3 /usr/lib/jvm/java-1.5.0-sun/jre/bin/java ... then? [03:00] hey ya, i have the webcam motion running and i don't know how to kill it === ryjax [n=ryan@unaffiliated/ryjax] has joined #ubuntu [03:01] dcordes: yes [03:01] webben \ === Alakazamz0r [n=Alakazam@198.170.183.130] has joined #ubuntu [03:01] chuckyp: ive seen it... i have problem with "make"ing it though! [03:01] dope, What is the name of the program? === cscfsh [n=csca2@82-70-96-217.dsl.in-addr.zen.co.uk] has joined #ubuntu [03:01] gnomefreak: anything else to do? [03:01] motion [03:01] it just returns: /bin/sh: line 0: cd: /lib/modules/2.6.15-27-386/build: No such file or directory [03:01] dope, is it an x program? [03:01] type 3 than enter now ubuntu will use that one system wide [03:01] dope, i.e. a gui program? [03:01] it's a command line program i think [03:01] dcordes: check about:plugins in firefox again [03:01] no gui [03:01] dope, try killall motion [03:01] and also Makefile.inc:89: *** /lib/modules/2.6.15-27-386/build is missing, please set KERNELPATH. Stop. [03:02] i think that worked [03:02] thx bro === cari_sohib_ce is now known as cari_sohib_co [03:02] dope, if its gui based you could alt+f2 type in xkill it will turn your cursor to a skull and cross bones just click on the app you want to kill. [03:02] this has no gui === lastnode_ [n=lastnode@unaffiliated/mahangu] has joined #ubuntu [03:02] dcordes: for other browsers other than ff you will need to set it in the browser (konq. opera ect...) [03:02] gnomefreak: argh still no java in about:plugins [03:02] but i think that did it === cari_sohib_co is now known as ce_nduth [03:03] dcordes: restart ff [03:03] allready did === Kannix [n=jens@xdsl-87-79-218-22.netcologne.de] has joined #ubuntu [03:03] dcordes: is this the ff that came with ubuntu or did you install another one? [03:03] gnomefreak: sudo killall firefox === mumbles-out is now known as mumbles [03:03] gnomefreak: no i installed ff2 manually the night it arrived === Versed [n=Versed@c-69-253-173-154.hsd1.nj.comcast.net] has joined #ubuntu [03:03] dcordes: thats why [03:03] gnomefreak, dcordes: is there a browser plugin for jre1.5? there's one in the repository for 1.4 [03:03] dcordes: give me a sec to find the command [03:03] <_jellydonut_> any freeradius folks out there? === ggoogi [n=ggoogi@58.230.6.11] has joined #ubuntu [03:04] gnomefreak: no need to hurry. thanks a lot [03:04] !java | neil__ [03:04] neil__: To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository [03:04] !java [03:04] To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository === cooL_sby [n=pc4@222.124.224.99] has joined #ubuntu [03:04] !firefox2 [03:04] Sorry, I don't know anything about firefox2 - try searching on http://bots.ubuntulinux.nl/factoids.cgi [03:04] !firefox [03:04] firefox is the default web-browser on Ubuntu. To install the latest version, see https://help.ubuntu.com/community/FirefoxNewVersion Installing plugins: https://wiki.ubuntu.com/FirefoxPlugins [03:04] dcordes: cd /opt/firefox/plugins/ === test3421 is now known as test3422 === BoggsBeer [n=biglou@203-206-110-129.dyn.iinet.net.au] has joined #ubuntu === stojance [n=stojance@62.162.208.199] has joined #ubuntu === Kosmos [n=kosmos@wlan-gw.hig.no] has joined #ubuntu [03:04] dcordes: let me know when you cd that [03:05] gnomefreak: no such file/directory. but don't ask me where i put it. any command to figure this out? [03:05] dcordes: than the next command run in full with the / . at the end === Trillian_ [n=Trillian@59.92.247.29] has joined #ubuntu [03:05] dcordes: dont know where you put it but you should have put it in /opt/ [03:05] anyone know a good mame client in gnome? === _Er1K_ [i=erik@re-url.com] has joined #ubuntu [03:05] dcordes: https://help.ubuntu.com/community/FirefoxNewVersion [03:05] gnomefreak: any way to find this out? [03:05] dcordes, locate firefox/plugins [03:05] chuckyp: thanks. i was asking for what dcordes is trying to achieve. i have gij working in firefox nicely. === cscfsh [n=csca2@82-70-96-217.dsl.in-addr.zen.co.uk] has joined #ubuntu === andresmujica [n=andresmu@201.244.244.253] has joined #ubuntu === doctorow [n=doctorow@68-65-221-88.vnnyca.adelphia.net] has joined #ubuntu === stylus_ [n=stylus@unaffiliated/stylus] has joined #ubuntu === niru [n=niru@203.129.255.178] has left #ubuntu ["Leaving"] [03:06] dcordes: locate should work than just make a sym link for it simular to sudo ln -s /usr/lib/mozilla-firefox/plugins/* . [03:06] anyone know a link that might help me install Ubuntu 5.10 ,ON a HDD that already has Win XP ? === Ballex [n=RaZeKeN0@82.194.215.238] has joined #ubuntu [03:06] !dual | Trillian_ === frinov [n=frinov@203.114.50.15] has joined #ubuntu [03:06] Sorry, I don't know anything about dual - try searching on http://bots.ubuntulinux.nl/factoids.cgi [03:07] !dualboot | Trillian_ [03:07] Trillian_: Dual boot instructions: https://help.ubuntu.com/community/WindowsDualBootHowTo (x86/AMD64) - https://wiki.ubuntu.com/YabootConfigurationForMacintoshPowerPCsDualBoot (Macintosh) [03:07] ty [03:07] Trillian_, 5.10?? [03:07] gnomefreak: ok found it ^^ it's in /usr/share/firefox/firefox/plugins [03:07] yeah === vertigo is now known as _vertigo- === Yancho [n=yancho@195.158.87.23] has joined #ubuntu [03:07] Trillian_, why not go for 6.06 or 6.10? === incorrect [n=fwest@193.82.117.250] has joined #ubuntu === pixelfreaky [n=andreas@p549D3548.dip0.t-ipconnect.de] has joined #ubuntu === LainNaomi [n=lain@d58-104-89-124.dsl.vic.optusnet.com.au] has joined #ubuntu [03:07] dcordes: cd there than run the command i gave you === _vertigo- is now known as vertigo === XoR [n=XoR@85.254.200.164] has joined #ubuntu [03:08] meh, connection is slow, had to get a CD from a friend [03:08] dcordes: cd /usr/share/firefox/firefox/plugins === Ballex [n=RaZeKeN0@82.194.215.238] has left #ubuntu [] [03:08] Trillian_, where are you? [03:08] dcordes: sudo ln -s /usr/lib/mozilla-firefox/plugins/* . === OllieD [n=VaDoR@67.96-244-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [03:08] Inida === Kosmos [n=kosmos@wlan-gw.hig.no] has joined #ubuntu [03:08] dcordes: with the /* . [03:08] india* [03:08] >.> [03:08] can anyone please explain this to me?(Python) UnboundLocalError: local variable 'number' referenced before assignment === edgarin [n=edgarin@216.230.150.7] has joined #ubuntu [03:08] Any users from india willing to post Trillian an updated version of Ubuntu? === bjornolai [n=bjorn@exten-halls-130.soton.ac.uk] has joined #ubuntu === _Er1K_ [i=erik@re-url.com] has joined #ubuntu === kmaynard [n=kmaynard@user-24-214-249-208.knology.net] has joined #ubuntu [03:09] Hi to allpeople, I have a problem with my frostwire whe the frostwire is loading in the terminal says: Configuring environment... [03:09] Loading FrostWire: [03:09] log4j:WARN No appenders could be found for logger (com.limegroup.gnutella.gui.Initializer). [03:09] log4j:WARN Please initialize the log4j system properly. === ryjax [n=ryan@unaffiliated/ryjax] has left #ubuntu [] [03:09] !paste | edgarin [03:09] edgarin: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (you can always find it in the channel topic, among other useful things) [03:09] and, the Frostwire load but dont work the screen is in blank [03:10] edgarin: are you using fancy transparency affects? [03:10] maybe not, thanks anyways ailean :) === jokester [n=catalin@vpn-cl-160-139.rz.uni-karlsruhe.de] has joined #ubuntu [03:10] Trillian_, try again. there are lots of indian users [03:10] Trillian_: do you mean the server's connection or yours? [03:10] Trillian_, it really is worthwhile to install the latest version [03:10] mine === LainNaomi [n=lain@d58-104-89-124.dsl.vic.optusnet.com.au] has left #ubuntu [] === noodles12 [n=ghost@134.193.244.179] has joined #ubuntu === bobbie__4 [n=Bobbie@S01060050046f293e.vc.shawcable.net] has joined #ubuntu [03:11] hey, i have some problem with vpnc. i can never connect from the first time. it says rtnetlink answers: file already exists. any ideas ? [03:11] and the ISP charges me for every upload/download thingy [03:11] if i used vpnc-disconnect and then reconnect normally the problem goes away and i can connect [03:12] what's the pdf reader for ubuntu? [03:12] Trillian_, i wonder how much it would cost me to post a disc to you === HeathenDan [n=blarg@125.212.82.164] has joined #ubuntu [03:12] igor: evince === [Deathmaster] [n=Linux@ns4.g23.net] has joined #ubuntu === Jahman [n=okay@87.231.178.129] has joined #ubuntu === D1G1T [n=Numb3rz@59.92.247.29] has joined #ubuntu === YogSothoth [n=john@lns-bzn-24-82-64-185-252.adsl.proxad.net] has joined #ubuntu === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu === TehUni [n=cory@c-67-191-139-148.hsd1.ga.comcast.net] has joined #ubuntu [03:14] <-- Trillian_ [03:14] what do the 2 partions for ubuntu do? [03:14] hi D1G1T - i'll post a disc to you if you want [03:15] it costs :( [03:15] dope, /swap and / swap is used as extra memory when your physical ram is used up. / holds all the system === ulaas [n=ulas@ant-a5-02-asy17.ant-ro-01.superonline.com] has joined #ubuntu [03:15] D1G1T, that's okay - pay me back by copying it for your friends [03:15] really? [03:15] D1G1T, sure - msg me [03:16] gnomefreak: how to go on? === cari_sohib_ce [n=pc2@222.124.224.99] has joined #ubuntu [03:16] now that im in the plugins folder === blacksoul [n=blacki@83.189.92.157] has joined #ubuntu [03:16] argh. brb. im getting bombarded. === skunkworks [n=skunkwor@68-115-41-210.static.eucl.wi.charter.com] has joined #ubuntu === Jimbo52 [n=jgh@67.40.175.114] has joined #ubuntu [03:17] hello === Kosmos [n=kosmos@wlan-gw.hig.no] has joined #ubuntu [03:17] i just installed ubuntu to check it out and im kinda lost === kioan [n=kioan@213.5.88.254] has joined #ubuntu [03:18] first of all i cant see my second hard drive [03:18] gnomefreak: still around? [03:18] yews === Revenger [n=juergen@client-82-3-70-96.manc.adsl.virgin.net] has joined #ubuntu [03:18] hello??? [03:18] sorry stepped out for a minute === tacopon77 [n=tacopon7@softbank218128109115.bbtec.net] has joined #ubuntu [03:18] dcordes: once you run the 2 commands i gave you restart ff [03:19] i thought before i removed ubuntu id stop here and see if anyone knows this os [03:19] Jimbo52: hi, did you read the help guides in your help menu to get you started? [03:19] menu?? === kevb [n=kevb@194-247-224-55.dynamic.dsl.as9105.com] has left #ubuntu ["Leaving"] [03:19] hello i have a problem when i lauch X with Driver "savage" in xorg.conf it does not work,the computer does not seems to be crashed but a can' t do anything and a i have to reboot ... lspci tell me it s a s3 savage , it is dapper === kioan [n=kioan@213.5.88.254] has joined #ubuntu [03:19] dcordes: the last command i gave you should have listed a bunch of stuff. all symlinks it tried to make [03:19] gnomefreak: sorry but they give me errors [03:19] Jimbo52: do you have a graphical interface at the moment? [03:19] it posts 2 floppies...i only have one [03:19] yes [03:19] gui [03:19] dcordes: the last command gave you already exsits? [03:20] yes [03:20] dcordes: thats fine [03:20] one supposed floppy (floppy1) supposedly has 99.9 gigs free???? === Lahey [n=chatzill@CPE000d8846b4a2-CM000039050c63.cpe.net.cable.rogers.com] has joined #ubuntu [03:20] dcordes: restart ff than about:plugins === kioan [n=kioan@213.5.88.254] has joined #ubuntu [03:20] gnomefreak: ./libnullplugin.so to libnullplugin.so: File exists [03:20] is there a user space tool to configure wifi? [03:20] dcordes: yes thats good [03:20] i suppose thats somehow the masterm altho it should be 115+ === thevenin [n=bushblow@adsl-75-7-204-35.dsl.lgtpmi.sbcglobal.net] has joined #ubuntu [03:21] dcordes: the ln -s command took all and tried to symlink them some already were there when you ran it the first time [03:21] ailean: i think i fixed it, to sure till you say something. === meuserj [n=meuserj@indianalifesciences.com] has joined #ubuntu [03:21] gnomefreak: -_- didn't work === Lobster [n=dem@dslb-088-073-182-227.pools.arcor-ip.net] has joined #ubuntu [03:22] so, why wont it recognise both my drives and whats with the floppy, and floppy1? === mr_lampe [n=lampe@dslb-084-056-207-197.pools.arcor-ip.net] has joined #ubuntu [03:22] Jimbo52: hmm I don't really know much about floppies, but if you post the contents of your '/etc/fstab' on http://paste.ubuntu-nl.org and give the channel a link, someone might be able to help. Also, open a terminal and type 'mount' without quotes and press enter, pastebin that as well [03:22] hey, anyone uses vpnc and can help me ? === dyennutza [n=dyennutz@82.78.187.168] has joined #ubuntu === dyennutza [n=dyennutz@82.78.187.168] has left #ubuntu ["Leaving"] [03:23] the problem isnt a floppy its the fact that it seems to falsly see more than one floppy, and doesnt see the second hard drive [03:23] Is there a list of people who would like discs anywhere? I know it takes a while to get them through shipit, but I'd be willing to send them out myself. [03:23] dcordes: than im not sure if that was right directory to be cd'ed into. since you didnt do it in /opt/im not sure === D1G1T is now known as D1G1T89 [03:23] Jimbo52: what filesystem is on the other drive's partition? [03:24] gnomefreak: omg how can i get back to old ff den? [03:24] ntfs [03:24] other drive is ntfs [03:24] !ntfs | Jimbo52 [03:24] Jimbo52: To view your Windows/Mac partitions see https://help.ubuntu.com/community/AutomaticallyMountPartitions - See also !fuse === UFO64 [n=UFO64@MURRAYJM8.umeres.maine.edu] has joined #Ubuntu [03:25] Jimbo52: note that you can only safely read from ntfs drives, writing is not recommended === nana [n=nana@0x55514fc4.adsl.cybercity.dk] has joined #ubuntu [03:25] dcordes: you have to remove it see !firefox and use the newversion link and how to remove is on there. just replace your directories with the ones they state [03:25] ubotu ...will look in a minute [03:25] Sorry, I don't know anything about will look in a minute - try searching on http://bots.ubuntulinux.nl/factoids.cgi === mkeadle [n=mkeadle@uslec-66-255-105-22.cust.uslec.net] has joined #ubuntu [03:26] ubotu: tell Jimbo52 about yourself [03:26] it sees network drives on other machines that are ntfs but wont see the one on this machine?? === meuserj [n=meuserj@indianalifesciences.com] has joined #ubuntu [03:26] Jimbo52: did you try what the wiki site recommended? [03:26] i missed that [03:26] Jimbo52: https://help.ubuntu.com/community/AutomaticallyMountPartitions [03:27] k brb === joelliot [n=SGAS@59.92.128.169] has joined #ubuntu === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu === kkppccdd [n=kk@226.166.186.60.broad.hz.zj.dynamic.163data.com.cn] has joined #ubuntu === alberto [n=alberto@eu85-86-86-98.clientes.euskaltel.es] has joined #ubuntu [03:28] hi === kkppccdd [n=kk@226.166.186.60.broad.hz.zj.dynamic.163data.com.cn] has left #ubuntu [] [03:28] why there is no compiz for aixgl/xorg in edgy? [03:28] alberto: there is [03:28] !info compiz [03:28] compiz: OpenGL composition manager - transitional package. In component universe, is optional. Version 0.0.13.38-0ubuntu3 (edgy), package size 25 kB, installed size 64 kB [03:28] No, but that version is for XGL === joelliot is now known as satshen [03:28] Not for aixgl. [03:29] alberto: join #ubuntu-xgl you can run compiz on edgy just fine beryl works better IMHO though [03:29] alberto: it works with aiglx in xorg [03:29] I done like beryl. === Qew [n=qew@82-69-126-225.dsl.in-addr.zen.co.uk] has joined #ubuntu [03:29] I like freedesktop standars, beryl not. === szavanna [n=szavanna@dsl-242-44-225.telkomadsl.co.za] has joined #ubuntu [03:29] neil__: Yes, I know, but not edgy one. [03:29] neil__: http://gandalfn.wordpress.com/howto/howto-compiz-aiglx-on-edgy/ [03:30] alberto: ask in #ubuntu-xgl. also the /topic in there has guides [03:30] gnomefreak: I dont use XGL, I use xorg. [03:30] hello === Shi`Hao [n=siaush@218.111.45.143] has joined #ubuntu === Alan-D [n=AD@216.95.210.66] has left #ubuntu [] [03:30] send to/ bluetooth in nautilus doesn't work, it finds any device [03:30] alberto: topics related to compiz/xgl/beryl are offtopic for this channel [03:30] someone could help me please? [03:30] gnomefreak: why? === Mr_Congeniality [n=mr_conge@71-213-103-189.slkc.qwest.net] has joined #ubuntu [03:31] gnomefreak: You speaked about beryl not me. [03:31] alberto: #ubuntu-xgl is the channel created for xgl, aiglx, compiz, beryl, and related [03:31] gnomefreak: I use xorg. [03:31] alberto: because there is no direct support for them in ubuntu [03:31] gnomefreak: Are you a ubuntu worker? [03:31] define worker? [03:31] anywhere i can get the csm package? I cant install compiz on edgy because the csm package is needed for compiz-plugins and it cant be installed [03:31] gnomefreak: I DONT use beryl. [03:31] So stop. [03:32] No beryl no XGL. [03:32] I use Xorg. [03:32] And Xorg is supported by Ubuntu. [03:32] alberto: than why did you ask about compiz [03:32] Xorg have aixgl inside. So if ubuntu support xorg support aixgl as well. === mathrick|away is now known as mathrick [03:33] alberto: aiglx does nothing on its own that you would beable to see. [03:33] anybody knows a C channel? [03:33] igor: ##c [03:33] alberto: if you install compiz-core, compiz-gnome and compiz-plugins that's all you need. it works with aiglx in xorg [03:33] neil__: No, it doesnt. [03:33] neil__: I did. :-) [03:33] thanks === mode/#ubuntu [+o gnomefreak] by ChanServ === alberto [n=alberto@eu85-86-86-98.clientes.euskaltel.es] has left #ubuntu [requested] === mode/#ubuntu [-o gnomefreak] by gnomefreak === Japsu [i=japsu@unaffiliated/japsu] has joined #ubuntu === alberto [n=alberto@eu85-86-86-98.clientes.euskaltel.es] has joined #ubuntu [03:33] ? [03:33] neil__: help him in #ubuntu-xgl [03:34] alberto: it works fine for my ATI-9200 based card. have you enabled composite in xorg.conf? [03:34] summat: are you trying to use compiz from the offcial ubuntu repositories? [03:34] neil__: I have compiz working here, not ubuntu official one. [03:34] alberto: and neil__ join #ubuntu-xgl for help with compiz. === caprice [n=caprice@swla050.WLAN.Uni-Marburg.DE] has joined #ubuntu [03:34] jrib, as far as i know, yes [03:34] I have one problem with my live cd with the Kubuntu Linux 6.06. It never start the cdrom when the computer iniciate. I already create a diskette with the boot menu but when i select the cd it give me a error. What can i do? === Sby_Fitnes_Diran [n=pc1@222.124.224.99] has joined #ubuntu [03:34] compiz-plugins: Depends: csm (>= 0.5) but it is not installable [03:34] i get that while installing [03:34] summat: apt-cache policy compiz-plugins on pastebin please [03:35] I'm having trouble installing the google toolbar on firefox 2.0 in edgy. Something about the build type? [03:35] I'm having trouble connecting my Ubuntu laptop to my cell phone via Bluetooth. Currently I'm trying to do it manually: hcitool cc ; hcitool auth , which responds with "HCI authentication request failed: Input/output error". Any insight on this? [03:35] is 6.10 more problematic than 6.06? === St_MPA3b [n=St_MPA3b@client3.pike.net.ru] has joined #ubuntu [03:35] Actually it's Kubuntu Edgy. === crapz0r [n=crapz0r@201.57.76.72] has joined #ubuntu === pip [n=pip@221.234.210.26] has joined #ubuntu [03:35] rb === colin_m [n=colin_m@dsl092-066-216.bos1.dsl.speakeasy.net] has joined #ubuntu [03:36] I heard that there is some kind of 3D desktopc program available ,right ? [03:36] *desktop [03:36] pip: uh ...yeah [03:36] phaedrus44, so what is its name and how can I get it === Hit3k_ [n=allan@203.212.129.118] has joined #ubuntu === Wulfie [i=wulfram@nat/transgaming/x-f459695501c06ed6] has left #ubuntu ["Leaving"] === szavanna [n=szavanna@dsl-242-44-225.telkomadsl.co.za] has left #ubuntu [] [03:36] jrib: iirc the official repos dont use csm yet [03:37] pip: I think you're after XGL & Beryl, see here http://www.beryl-project.org/index.php [03:37] gnomefreak: yeah, that's what I believe as well === jumbers [n=john@ool-457dc6cb.dyn.optonline.net] has left #ubuntu [] [03:37] pip: which ubuntu you use? [03:37] 6.06? [03:37] loutrine, thanks [03:37] Anyone know why the google toolbar is not compatible with my Firefox build type (linux-gnu_x86-gcc3) ?? [03:37] phaedrus44, only ubuntu can use that ? [03:37] is it a good idea to use Dapper Drake for ntfs writing support? === StephenL [n=steve@216.62.85.65] has left #ubuntu [] [03:37] bjornolai: they havent made a version for 2.0 yet [03:37] first day on linux here [03:38] jrib: just checked my sources.list, think its sorted now, there was an extra line when i tried beryl, its installed it now === alberto [n=alberto@eu85-86-86-98.clientes.euskaltel.es] has joined #ubuntu [03:38] pip: what? [03:38] Jimbo52, : ) [03:38] summat: great [03:38] bjornolai: thats the only thing that would be the reason [03:38] gnomefreak: thanx :) [03:38] pip: No probs :) I found a great guide for ati cards running ubuntu edgy if that would help === joelol75 [n=chris@pool-72-79-128-191.sctnpa.east.verizon.net] has joined #ubuntu === ragedragon [n=dragon@lns-bzn-58-82-251-235-30.adsl.proxad.net] has joined #ubuntu [03:38] i mean the ntfs fuse module [03:38] check thiss out http://www.youtube.com/watch?v=i9JC5NQ7G0o [03:38] phaedrus44, i want to ports it to other linux [03:38] should i use the ntfs fuse module whatever that is [03:38] *port [03:39] Jimbo52: first of many :) [03:39] As of Ubuntu 6.04 (Dapper Drake) there is slightly more NTFS writing support [03:39] through a very experimental NTFS FUSE module. Using this seems to work but [03:39] is NOT recommended. Do you want to use this? [no] === kioan [n=kioan@213.5.88.254] has joined #ubuntu [03:39] leave it set at no?? === samigaru [n=samigaru@218.93.201.146] has joined #ubuntu === beasty [n=beasty@d54C2DC96.access.telenet.be] has joined #ubuntu === oyvind [n=oyvind@f3bdhcp15.uio.no] has joined #ubuntu === sudharsh [n=sudharsh@59.92.42.12] has joined #ubuntu [03:40] Jimbo52: might want to try a fuse channel. i dont recommend using it as it can hurt your system [03:40] Jimbo52: that depends on how much you value your data and whether or not you have backups. _very experimental_ are the key words [03:41] Anyone know how I can stop Evolution from creating a HTML-part in all my outgoing mail ? I _do_not_ want HTML to be part of the mails I send ... I can't figure out how to disable it === morphycs [n=ifarouk@196.202.90.203] has joined #ubuntu [03:41] k...so I wont be ablel to write to the ntfs drive correct? [03:41] oyvind: one moment, i've done this [03:41] Jimbo52, pretty much [03:41] How to disable ipv6 in Edgy 6.10? === tim167 [n=tim@d51A46238.access.telenet.be] has joined #ubuntu [03:41] !ipv6 | morphycs [03:42] morphycs: To disable ipv6 read https://help.ubuntu.com/community/WebBrowsingSlowIPv6IPv4 [03:42] !ipv6 [03:42] To disable ipv6 read https://help.ubuntu.com/community/WebBrowsingSlowIPv6IPv4 [03:42] what filesystem should the second drive be set at ? === maxxim [n=maxxim@LAubervilliers-151-13-98-21.w217-128.abo.wanadoo.fr] has joined #ubuntu [03:42] for full usage === chi-pandanIndah [n=Chi-pand@60.50.107.8] has joined #ubuntu [03:42] Can anyone help me with Beryl in KDE. It works, I just need a regular session and autoloading the beryl-manager crashes this. I made a startup script .kde/Autostart/beryl to load it in, and used a if [$DISPLAY = ":1.0" ] ; then load statement but the script doesn't work... After KDE starts I can re-run the script and it works.... Is this a KDE prob (Too soon to check $DISPLAY) or is there a better condition to check? [03:42] fat32?? [03:42] joelol75: try in #ubuntu-xgl [03:42] Jimbo52: ext3 [03:42] est3? [03:42] Jimbo52, just leave it at ntfs, read from it in linux, and get the windows ext3 drivers for when you have to boot into windows === aro-ron [n=aaron@host-216-249-122-36.wireless.southern.edu] has joined #ubuntu === nils__ [n=nils@193.120.101.37] has joined #ubuntu [03:43] thanx [03:43] i dont have windows on this machine any more === agent [n=agent@pool-71-97-200-58.aubnin.dsl-w.verizon.net] has joined #ubuntu [03:43] that's if the other partition is going to be a windows os...if it's just raw storage use ext3 [03:43] need help. I am new at Ubuntu...my internet is not working when i re-start into livecd [03:43] i have windows on another machine on this kvm switch [03:43] then use ext3 [03:43] oyvind: Edit|Preferences|Composer Preferences|Default Behaviour and uncheck Format messages in HTML [03:43] where do i find this ext3? [03:43] vlc plays an mp4 file but without sound, how do I fix this ? [03:43] chi-pandanIndah, wireless or wired? === Jay_Dogg [n=jukka@a88-112-84-95.elisa-laajakaista.fi] has joined #ubuntu [03:44] neil__: Thanks a lot :) [03:44] why ext3 and why not reiserfs? [03:44] Jimbo52, how are you creating the filesystem? in the installer? [03:44] or where do i change it? [03:44] wijnand, ext3 is a little more stable [03:44] ah [03:44] honestly i dont know what the hell im doing here :) === Sonderblade [n=mah@static-213.131.147.169.addr.tdcsong.se] has joined #ubuntu [03:44] never had issues with reiser, but then again neither with ext3 :) [03:45] Jimbo52, unmount it, mk2fs -j /dev/hdx [03:45] first time i looked at this os [03:45] Jimbo52, google is your friend too [03:45] yea i know === maxxim_ [n=maxxim@LAubervilliers-151-13-98-21.w217-128.abo.wanadoo.fr] has joined #ubuntu [03:45] Jimbo52: install gparted if you want a nice gui interface [03:45] Jimbo52: gparted might be a good way to go [03:45] wijnand, i've never had a problem with reiser (use it on my server even tho i wanna switch it) but ive heard data loss stories...ext3 is pretty rock solid === jvolkman [n=jvolkman@208.17.32.27] has joined #ubuntu [03:46] neil__: I already had that option turned off. The reason I got confused was that I noticed my saved drafts contained an HTML-part. However, this part disappeared when I actually sent the saved drafts, so no problem. Thanks for the help, anyway, it works as expected. === guillem101 [n=guillem1@28.Red-80-32-57.staticIP.rima-tde.net] has joined #ubuntu [03:47] wijnand: I've had no problems with JFS or XFS. i'm presently using XFS [03:47] maybe i s should go see if that script from that site made the drive accessable first [03:47] brb [03:47] huh? === StephenL [n=steve@216.62.85.65] has joined #ubuntu === D1G1T89 [n=Numb3rz@59.92.247.29] has joined #ubuntu === TheJF [n=redfox@mctnnbsa30w-156034049202.nb.aliant.net] has joined #ubuntu [03:48] Hey all, anyone able to give me a hand with some video drivers? I would like to try and run the OSS ATI drivers, so I can run AIGLX, but dont know if itgot installed with edgy or not, the online documentation didnt help much. Any tips? if not, I will just go with proprietary drivers === Guardian [n=Guardian@mar44-1-87-90-32-28.dsl.club-internet.fr] has joined #ubuntu [03:48] hi [03:48] I can't get my mic to work in edgy. Bugs the hell out of me having to boot in to windows to talk to people. Anyone know anything about mics and edgy? [03:49] aro-ron: the oss ati drivers are in xorg === jere [n=jere@81-203-155-113.user.ono.com] has joined #ubuntu [03:49] dammit...drive is still not visible as far as i can see === morphycs [n=ifarouk@196.202.90.203] has joined #ubuntu === jere [n=jere@81-203-155-113.user.ono.com] has left #ubuntu ["................"] [03:49] bjornolai, check your volume control, make sure the mic isnt muted === Versed [n=Versed@c-69-253-173-154.hsd1.nj.comcast.net] has joined #ubuntu [03:49] it should show under "computer" right? === oyvind [n=oyvind@f3bdhcp15.uio.no] has left #ubuntu [] [03:49] Jimbo52, language [03:49] neil_ I know that, how do I get them to actually run? === SaLoMoN [n=SaLo@xglusers.de] has joined #ubuntu [03:49] hi, I have a Pentium 4 HT cpu and I saw a site stating that I've to use linux kernel i686 instead of 386, why is that?? === Determinist [i=deter@unaffiliated/determinist] has joined #ubuntu [03:49] do i need to re install the os or what? === Guardian [n=Guardian@mar44-1-87-90-32-28.dsl.club-internet.fr] has left #ubuntu [] [03:50] aro-ron: select ati in dpkg-reconfigure xserver-xorg [03:50] I disabled ipv6 as written in the ubuntuforums but when I check for that "ip a | grep inet6" I get output which means that ipv6 is active [03:50] Shi`Hao, you dont have to, but it will use both threads [03:50] Jimbo52, you need to do some googling and reading [03:50] doctorow: any luck? === grout [n=grout@montpeliervt-cuda1-24-50-145-126.sbtnvt.adelphia.net] has joined #ubuntu [03:50] morphycs, did you reboot? [03:51] kmaynard: sure [03:51] neil_: oh duh, thank you... time to get my glasses checked === co_17_cr_tmn_crh [n=pc10@222.124.224.99] has joined #ubuntu === pppoe_dude [n=pppoe_du@unaffiliated/blimpdude] has joined #ubuntu [03:51] I have checked every option in my alsa mixer gui. Tried using the alsa mixer from console, but I can't seem to get the mic volume up. [03:51] well if this os was worth a sh*t it seems it should at least be able to recognise a freakin hard drive without taking a course to figure out why it wont [03:51] im looking to buy a new mini pci wireless card for my dell because my old ones compatability sucks with linux, which card would you guys recoment [03:51] pcmcia card? [03:51] bjornolai: run the volume-control program, enable all the switches any turn on and up 'capture', 'mic', etc. [03:51] troll in the dungeon... [03:51] no mini pci === tir [n=tir@pdbn-590d23d3.pool.einsundeins.de] has joined #ubuntu === teicah [n=teicah@dialup-4.158.201.80.Dial1.Chicago1.Level3.net] has joined #ubuntu [03:52] hi. ok, say i have a corrupt/unusable master boot record.... i.e. computer doesn't boot... NOW, if i install grub on it, will it autodetect which operating systems are on which partitions? === ProN00b [n=dot@pD9E3B655.dip.t-dialin.net] has joined #ubuntu [03:53] anyone know how come gaim is not working but the network (firefox) is working perferctly well? === abbyz [n=root@202.149.42.68] has joined #ubuntu === morphycs [n=ifarouk@196.202.90.203] has left #ubuntu [] [03:54] how do i change the screen resolution from the shell? === chi-pandanIndah is now known as New-Bee === Tepa^ [n=teillika@addr-85-23-8-242.suomi.net] has joined #ubuntu === ruggy [n=someone@001-729-852.area1.spcsdns.net] has joined #ubuntu === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu [03:55] shell being console? [03:55] yeah [03:55] pppoe_dude, try it; ubuntu should show the detected operating systems during installation of grub === worldcitizen [n=Miranda@59.144.244.252] has joined #ubuntu === chorse [n=ps@dslb-084-062-195-069.pools.arcor-ip.net] has joined #ubuntu [03:55] abbyz iirc that's a boot option === bobbie__4 [n=Bobbie@S01060050046f293e.vc.shawcable.net] has left #ubuntu ["I] [03:55] when i use for i in /dev/[hs] d[a-z] ; do sudo fdisk -l $i; done i can see the drive in the terminal but not under "computer" [03:56] hmm === user-land [n=user-lan@217-162-168-80.dclient.hispeed.ch] has joined #ubuntu [03:56] dorto, i only want to install grub from livecd... there is no ubuntu installation on the computer... === sean_ [n=sean@cpe-069-132-052-158.carolina.res.rr.com] has joined #ubuntu [03:56] Dooglus: In the "normal" volume control everything is on and up. But when i go in to the alsa mixer from console the mic is down and unmovable === aro-ron [n=aaron@host-216-249-122-36.wireless.southern.edu] has left #ubuntu [] === maxxim_ [n=maxxim@LAubervilliers-151-13-98-21.w217-128.abo.wanadoo.fr] has left #ubuntu ["Quitte"] [03:56] wijnand: so there's a way in which i can change that boot option? === quiet [n=quiet@unixcorps/staff/quiet] has joined #ubuntu === manu_ [n=ravelli@lts1pc7.epfl.ch] has joined #ubuntu [03:56] dorto, this is for a friend... well, i guess another way to ask the question... if there's a windows installation, can i uze grub to boot into it? (this is purely diagnostic) [03:57] ya [03:57] pppoe_dude, yes, grub can boot into windows installation === mypapit [n=manbruta@124.82.41.33] has joined #ubuntu [03:57] pppoe_dude: Can't you boot a windows cd and run a fixmbr or something...? === andresmujica [n=andresmu@201.244.244.253] has left #ubuntu ["www.seaq.com.co] [03:57] dorto, so it will autodetect it right? coz theres no /etc/menu.1st file or anything [03:57] pppoe_dude, you can do it from grub prompt itself even if there is no entry for windows in grub menu === incorrect [n=fwest@193.82.117.250] has joined #ubuntu === proppy [n=ubuntu@free.mekensleep.com] has joined #ubuntu === ahaller [n=haller@134.102.133.79] has joined #ubuntu [03:57] dorto, do you have a handy command? [03:57] anyone know why in bash, if i do for i in $FILE.... when $FILE=`cat file_with_multiple_lines`, the for statement does not iterate over every line? $i ends up being $FILE [03:58] pppoe_dude, no, you need to enter the partition number on which windows is installed [03:58] dorto, so... grub> 1 will boot /dev/hda1? [03:58] (in the prompt ofcourse...) [03:58] bjornolai: there's a switch for which mic to use, too? [03:59] pppoe_dude, yeah, but I don't remember the exact procedure; my brother dictates me and I type it [03:59] but i have booted into windows from grub> [03:59] hi, from a edgy live cd: [03:59] mkdir /tmp/a [03:59] cvs -d /tmp/a init [03:59] cvs [init aborted] : cannot get working directory: No such file or directory [03:59] ok. will figure it out thanks [03:59] pppoe_dude, pm me [03:59] filling a bug report right now if not already known . === LjL [n=ljl@81-208-36-87.ip.fastwebnet.it] has joined #ubuntu === abbyz [n=root@202.149.42.68] has left #ubuntu ["all"] === G-net|Gilnim [n=gilnim@unaffiliated/gilnim] has joined #ubuntu === Amallya [n=Adyna@193.108.235.251] has joined #ubuntu === gouki [n=gouki@bl5-11-111.dsl.telepac.pt] has joined #ubuntu === Nogimics [i=n0gimics@195.242.221.54] has joined #ubuntu [04:01] dooglus: I can't seem to find no switch. There is an internal mic, and I have gotten that one working at one point, but it disappeared again. But what I need is the external one. === dinamizador [n=dinamiza@83.230.235.104] has joined #ubuntu === richiefrich [n=dethwish@unaffiliated/richiefrich] has joined #ubuntu === D1G1T89 [n=Numb3rz@59.92.247.29] has left #ubuntu ["Connection] === gouki [n=gouki@bl5-11-111.dsl.telepac.pt] has left #ubuntu [] === blrakach [n=blrakach@208.40.193.226] has joined #ubuntu === jeddy3 [n=mattiast@gw.sbg.se] has joined #ubuntu === Doodluv [n=brad@24.214.206.158] has joined #ubuntu [04:02] im looking to buy a new mini pci wireless card for my dell because my old ones compatability sucks with linux, which card would you guys recoment === inc|freaky [i=alpha@freakyy.de] has joined #ubuntu [04:02] is here any Opera users? === Trixsey [n=secret@c-2b9072d5.012-2011-73746f31.cust.bredbandsbolaget.se] has joined #ubuntu [04:03] agent: I'll need to seem more of the script to figure that out, also note that it'll run for every WORD in the file not every line === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu [04:04] help needed. how come my "Gaim" unable to link to msn or yahoo when the Firefox can be use? [04:04] ifireball: thank you... i was directed to a faq in #bash which i think answers my question [04:04] agent: n/p === tuna_ [n=tuna@tunamasiina.kortex.jyu.fi] has joined #ubuntu [04:05] (gedit:6294): GnomeUI-WARNING **: While connecting to session manager: [04:05] Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed. [04:05] New-Bee, tell the error message you are getting. maybe you have not configured your yahoo account properly === atlas95 [n=atlas@AVelizy-152-1-72-38.w83-204.abo.wanadoo.fr] has joined #ubuntu [04:05] ? === Milchmann [n=david@DSL01.83.171.148.236.ip-pool.NEFkom.net] has joined #ubuntu === tuna-fish [n=tuna@tunamasiina.kortex.jyu.fi] has joined #ubuntu === surface is now known as scamboy [04:06] cvs -d /tmp/a init <-- works for me fine though; just for your info [04:06] its just unable to connect...just mention "unable to make connection" i use default setting === proppy [n=ubuntu@free.mekensleep.com] has joined #ubuntu [04:06] cvs -d /tmp/a init <-- works for me fine though; just for your info [04:06] Hey you guys! I'm thinking about switching from Windows (duh!) to Ubuntu... So I figured I'd ask a few questions first :D === genon [n=genon@87.96.161.30] has joined #ubuntu [04:06] dorto: on a edgy live cd ? [04:07] proppy, no, not live cd, normal installed version === hastesaver [i=shreevat@unaffiliated/hastesaver] has joined #ubuntu [04:07] Trixsey: Go ahead :) [04:07] proppy, sorry, did not read your message completely === jooony- [i=jony@1-1-3-33a.has.sth.bostream.se] has joined #ubuntu === geser [n=michael@dialin106081.justdsl.de] has joined #ubuntu [04:07] dorto: np === Jimbo52 [n=jgh@67.40.175.114] has left #ubuntu [] === d33p__ [n=d33p@87.217.147.106] has joined #ubuntu === solevita [n=kim@dialin-clp-080-228-34-192.ewetel.net] has joined #ubuntu [04:08] edgy doesn't show anyomore unmounted usb keys on the desktop if I don't click mount when I plug it in why ? (kubuntu) === eggauah [n=daniel@201.72.63.61] has joined #ubuntu === mandy [n=mandy@ycl38-2-88-160-49-19.fbx.proxad.net] has joined #ubuntu [04:08] hello there [04:08] ich hab 'ne frage [04:08] !de [04:08] Deutschsprachige Hilfe fuer Probleme mit Ubuntu, Kubuntu und Edubuntu finden Sie in den Kanaelen #ubuntu-de, #kubuntu-de, #xubuntu-de und #edubuntu-de === scamboy is now known as surface === proppy [n=ubuntu@free.mekensleep.com] has joined #ubuntu === mumbles is now known as mumbles-off === marfis [i=marco@marfis.org] has joined #ubuntu === solevita [n=kim@dialin-clp-080-228-34-192.ewetel.net] has left #ubuntu ["Verlassend"] === jonshea [n=jonshea@vpn-84-78.dartmouth.edu] has joined #ubuntu === marfis [i=marco@marfis.org] has left #ubuntu ["WeeChat] [04:09] #1) Does Ubuntu work well in a Windows-network? === devnu11 [i=devnu11@devnu11.org] has joined #ubuntu [04:10] Trixsey: windows network? [04:10] Trixsey: there is Samba included by default, with graphical frontends [04:10] what is tat? === TheGateKeeper [n=gatekeep@82-36-112-78.cable.ubr03.king.blueyonder.co.uk] has joined #ubuntu [04:10] Trixsey: With file sharing etc? Yes. [04:10] surface: A network filled with windows computers basically [04:11] loutrine: yeah [04:11] Trixsey: sure === playboy [n=playboy6@c-67-167-219-86.hsd1.il.comcast.net] has joined #ubuntu [04:11] don't worry about the virus infection from the windows [04:11] My main problem is I have a program I'm running, which is pretty much like an advanced calculator [04:11] enyc: wats that command to get every thing you need to build an app in ubuntu [04:11] ubuntu won't get affected [04:11] hi all. can someone tell me why i get this since i upgraded to edgy: http://www.nopaste.linux-beginner.org/index.php?id=2938a76224 ? [04:11] apt-get some-thing package-name [04:11] it's written in delphi, and it aint open-source [04:11] Trixsey: I have Ubuntu PC acting as file server for windows PC's if thats what yer lookng for === solevita [n=kim@dialin-clp-080-228-34-192.ewetel.net] has joined #ubuntu [04:11] its something about locales i guess === jokester [n=catalin@vpn-cl-160-139.rz.uni-karlsruhe.de] has left #ubuntu [] [04:12] k31th: apt-get? [04:12] k31th, build-essential [04:12] Trixsey: and you want to...? === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu === pulse [n=dei3400@194.68.139.218] has joined #ubuntu [04:12] k31th, apt-get install build-essential, to be precise [04:12] I just want a cool OS === Lurkan [n=agsm@189.142.106.4] has joined #ubuntu [04:12] no it gets all the deps === akawaldo [n=garrett@pool-71-245-122-250.cmdnnj.fios.verizon.net] has joined #ubuntu [04:12] hastesaver: so i can pull down all the deps for a package [04:12] Trixsey, there are a few "advanced calculators" for linux. [04:12] We use Solaris in school, and that is fts [04:12] Trixsey: mac os is cool [04:12] oh rly? [04:12] LjL: This calculator is very specifically designed for one thing though.. calculating attacks in a game I play :P === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu [04:13] k31th, that apt-get does by default [04:13] hi can anyone help me in playing a video CD [04:13] !wine | Trixsey [04:13] Trixsey: wine is a compatibility layer for running Windows programs on GNU/Linux. See https://help.ubuntu.com/community/Wine for more information. [04:13] Trixsey: like poker :-p [04:13] Compability layer.. as in emulator? [04:13] Trixsey: well, Wine means Wine Is Not an Emulator === surface is now known as geek00L[0] [04:13] LOL :P [04:13] I have installed ubantu from the ubuntu live CD and now the palyer does not pay the video cd. [04:13] k31th, "apt-get install " (you can also use aptitude, or Synaptic, or Adept instead of apt-get) will automatically install that package and all its dependencies [04:13] I have a slight problem getting the right Hz for my monitor, it's stuck on 60Hz, any ideas? [04:13] The cd drive is mounted though [04:13] worldcitizen: get vlc player that works [04:13] worldcitizen, is it a DVD? [04:14] !aptitude [04:14] aptitude is another terminal-based front-end to APT, like apt-get. However, aptitude can remember the dependencies installed with a package and remove them if you uninstall. See https://help.ubuntu.com/community/AptitudeSurvivalGuide [04:14] worldcitizen: join #ubantu [04:14] no it's a cd [04:14] #2) Does DC++ run well on Ubuntu? [04:14] Trixsey, when people say "emulator", they usually mean something that simulates a computer architecture. WINE on the other hand just executes Windows binary files, and has a (mostly) Windows-compatible API. that's different === dear_ [n=Xscript@ppp-124.121.24.185.revip2.asianet.co.th] has joined #ubuntu [04:14] Can anyone tell me how to change the language of my ubuntu. He's speaking norwegian and that bugs me :) [04:14] Hello === cga [n=cga@213-140-6-101.ip.fastwebnet.it] has joined #ubuntu [04:14] LjL: is wine free? [04:14] Trixsey: wine is free, dc++ doesn't run at all on Ubuntu AFAIK, but there are alternatives [04:15] i want install Lanquage Thai [04:15] yeah fulDC and stuff, right? === Kosmos [n=kosmos@wlan-gw.hig.no] has joined #ubuntu [04:15] bjornolai: when you log in there is an option to change language (if you have it installed) [04:15] !info dcgui | Trixsey [04:15] !thai [04:15] dcgui: Direct Connect Graphical client (GTK+) (peer-based file-sharing). In component universe, is optional. Version 0.80-5 (edgy), package size 432 kB, installed size 1292 kB [04:15] Sorry, I don't know anything about thai - try searching on http://bots.ubuntulinux.nl/factoids.cgi [04:15] oh yeah === New-Bee [n=Chi-pand@60.50.107.8] has joined #ubuntu [04:15] dcqt and dcguiqt and stuff [04:15] !thai [04:15] Sorry, I don't know anything about thai - try searching on http://bots.ubuntulinux.nl/factoids.cgi [04:15] Yes Thai === Vaun [n=jws141@pool-151-204-24-71.pskn.east.verizon.net] has joined #ubuntu [04:16] i want install Lanquage Thai and Keyboard Thai [04:16] Agent: when I log in? U mean just before the splash [04:16] bjornolai: if you need to install a language, go to system->administration->language support (thats in english - you will need to transalte into the current language) [04:16] krap krap [04:16] worldcitizen, it *should* play by default, usually. [04:16] Trixsey: the current KDE one is called valknut actually, but anyway there are at least three or four different clients in the repos [04:16] !restricted | worldcitizen [04:16] worldcitizen: For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats [04:16] bjornolai: when you type in your username/password... there is an options button on the bottom === Kosmos [n=kosmos@wlan-gw.hig.no] has left #ubuntu [] [04:16] Thanx === gargamel_IV [n=jacek@dvk193.neoplus.adsl.tpnet.pl] has left #ubuntu [] [04:17] I can't seem to change my Hz for my monitor, any ideas? === smartmovie [n=smartmov@124.82.41.33] has joined #ubuntu [04:17] Help Me [04:17] help you with what?? [04:17] C++ only compiles to exe? [04:17] or what? [04:17] Trixsey: uh? === Trixsey haven't used C++ before [04:17] smartmovie: (16:16:19) dear_: i want install Lanquage Thai and Keyboard Thai [04:17] I figured since DC++ didn't run in Ubuntu === wiscalico [n=je@130.226.136.2] has left #ubuntu ["Leaving"] [04:17] hi does anybody know which plugin is responsible for live media in mozilla firefox? the videos work, but there is no sound for example at google.video [04:17] Because it's open source, so should be able to compile DC++ in Ubuntu? [04:17] Trixsey: ".exe", if that's what you mean, is just the extension Windows and other operating systems (not Ubuntu) use for executable programs === sharms [n=sharms@ubuntu/member/sharms] has joined #ubuntu [04:18] Trixsey: no. === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu [04:18] Trixsey: the fact that it's open source doesn't mean you can take it and compile it unmodified on any system. === jrollins [n=jrollins@adsl-66-143-210-162.dsl.ablntx.swbell.net] has joined #ubuntu [04:18] Trixsey: the Linux and Windows APIs are totally different. you'd have to rewrite it to work on Ubuntu [04:18] Help Me [04:18] i want install Lanquage Thai and Keyboard Thai [04:18] solevita: that is a known problem, if you reset your x session, and do not open any apps which use your soundcard, it should work === Syn_Flood [n=Bdover@mail.next-it.net] has joined #ubuntu [04:18] ok [04:18] Java ftw :p [04:19] Trixsey: anyway, why don't you just try out the other clients we have? [04:19] guys, is there a way to help out shipit? [04:19] Hiya [04:19] I had ubuntu before, briefly [04:19] long ago [04:19] wheelswitch: thanx!! let's try it out [04:19] and I remember I couldn't get DC going [04:19] Can i ask a question about Evolution in there? === hangfire [n=hangfire@200.95.149.220.cableonline.com.mx] has joined #ubuntu [04:19] anyone know if there is some kind of a spamblocker plugin for gaim? [04:19] Where can I change the Hz for my monitor, if it isn't displayed in the Screen Resolutions [04:20] ihave the totem media player installed but it does not play the vcd === draconius [n=j00@incognito.student.iastate.edu] has joined #ubuntu [04:20] worldcitizen: sudo apt-get install vlc [04:21] Ubotu, please tell genon about fixres [04:21] genon: Ubuntu ususally chooses the bes refresh rate possible, if you're not happy with the rate it chose, you can force it to ues a higer rate by telling it in xorg.conf that your screen does not support as low rate is is chose [04:21] genon: however, messing with xorg and that level might cause your X not to load at all === gana-home [n=ganadist@58.140.174.9] has joined #ubuntu === sally2 [n=sally2@208.233.32.40] has joined #ubuntu [04:22] how does one get the trask can back on the desktop gui? [04:22] I have evolution installed it has the exchange plugin installed as well (all by default install of Xubuntu) but exchange isn't showing up as a selectable server to use. [04:22] is this common? i can't find anything on this type of a problem online anywhere [04:23] ifireball: I think that it's stuck on 60Hz for some reason, kinda new to Ubuntu so I don't know what I am looking for in xorg that could change that [04:23] Is there anyway I can tell whether ubuntu has detected my microphone or not? === wall-keeper [n=wall-kee@85.159.40.3] has joined #ubuntu === LGKeiz [i=LGKeiz@ppp-70-225-176-161.dsl.chmpil.ameritech.net] has joined #ubuntu [04:23] I've reinstalled Evolution as well hasn't fixed anything. I'm new to Xubuntu so i could just be doing something wrong. Any suggestions? [04:23] bjornolai: if it has detected your soundcard, it has detected your microphone. === crapz0r is now known as zomgkickbanmepls [04:23] genon: I think someone already told ubotu to link you to a wiki page about all this, if not "/msg ubotu fixres" [04:24] oki === htg_ [n=htg@82-38-195-78.cable.ubr04.shef.blueyonder.co.uk] has joined #ubuntu === salah [n=pakkisfa@195.80-202-89.nextgentel.com] has joined #ubuntu === ekimus [n=mmarcher@v034.demo.tuwien.ac.at] has joined #ubuntu === sc4ttrbrain [n=nobody@KHP059138070148.ppp-bb.dion.ne.jp] has joined #ubuntu [04:25] In Gnome Alsa Mixer i can only choose Rec on capture. Is this my mic? (sorry for my ignorance) === igor [n=igor@201.79.206.239] has joined #ubuntu === wbk [n=wbnik@209.217.197.116] has joined #ubuntu [04:25] is there any program similar to SuperKaramba to ubuntu ? === Jonbo [n=Jonbo123@adsl-074-229-245-180.sip.bhm.bellsouth.net] has joined #ubuntu [04:26] bug reported : https://launchpad.net/distros/ubuntu/+source/cvs/+bug/71089 [04:26] igor: gdesklets, never tried it though so I can't gurantee quality... === dungodung [n=felix@wikipedia/dungodung] has joined #ubuntu [04:26] !info kgrellm | igor [04:27] Package kgrellm does not exist in any distro I know [04:27] err, gkrellm === Vaun [n=jws141@pool-151-204-24-71.pskn.east.verizon.net] has joined #ubuntu [04:27] LjL: that's not quite what superkaramba does === dave_ [n=dave@c-71-192-158-89.hsd1.ma.comcast.net] has joined #ubuntu [04:28] anyone have any suggestions? :) [04:28] #4) What made you choose Ubuntu over other unix distributions? [04:28] ifireball: dunno, i've used neither. but superkaramba has shiny applets for the desktop, and gkrellm has shiny applets for the desktop... === GrimWald [n=Telepath@acces1042.res.insa-lyon.fr] has joined #ubuntu [04:28] Trixsey: Community (support), debian based (apt-get) and all the cool kids were doing it :p [04:28] yeah, gdesklet is prone to crashes, not all desklets, but some === gorilla [n=gpatters@ppp234-3.static.internode.on.net] has joined #ubuntu === solevita [n=kim@dialin-clp-080-228-34-192.ewetel.net] has joined #ubuntu [04:28] loutrine, how do u install a package in ubuntu === mluser-work [n=MYoda@12.149.189.42] has joined #ubuntu [04:29] anyone know if its possible to run fglrx and nvidia-glx kernel sources on the same machine? apt only wants one or the other [04:29] i have searched the site for ubuntu vlc [04:29] worldcitizen: sudo apt-get install foo [04:29] ive got two video cards, one of each [04:29] it can be downloaded but there are so many versions [04:29] there's also adesklets, which should be desktop-agnostic [04:29] Hey can someone help me with my ubuntu ??? [04:29] worldcitizen: open up a terminal and type sudo apt-get install vlc === Homie [n=ss@p54867686.dip.t-dialin.net] has joined #UBUNTU [04:29] hello [04:29] wheelswitch: IT WORKED!! thank you *kiss* [04:29] i have a problem with apache2 php5 with charsets [04:29] Trixsey: i ruled out anything that didn't use APT, since i was already so used to it on Debian and liked it. Ubuntu was the most obious choice for a desktop computer. anyway, i think this is not a support question and should be taken to #ubuntu-offtopic instead [04:29] :( === Alakazamz0r [n=Alakazam@198.170.183.130] has joined #ubuntu [04:30] is it possible to open passworded rar files under ubuntu without password? [04:30] LjL: afaik gkrellm is just one ugly horizontal bar full of system meters, not quite up to pare with SuperKramba, but actually KDE guys began to write SuperKaramba becasue they envied gdesklets... [04:30] How can i get the latest nvidia drivers from nvidia's screen resolution to change === geek00L[0] is now known as geek00L[no-batte [04:30] my refresh rate is stuck @ 800x600@50hz [04:30] #5) Is ubuntu (the OS, excluding all programs and stuff included in the bundle) updated frequently? How frequent? === geek00L[no-batte is now known as geek00L[6] [04:30] is there a chat room for evolution issues? === Fallen_Angel i have a problem with apache2 php5 with charset display ! Can Someone help me ??????? [04:31] ive changed it to the monitors specs in xorg.conf === Fallen_Angel i have a problem with apache2 php5 with charset display ! Can Someone help me ??????? [04:31] !repeat | Fallen_Angel [04:31] Fallen_Angel: Don't feel ignored and repeat your question quickly, if nobody knows your answer, nobody will answer you. You can search https://help.ubuntu.com or http://wiki.ubuntu.com while you wait. Also see !patience === wishlog [n=newbie@h246228.resnet.cuhk.edu.hk] has joined #ubuntu === Jaak [n=ernst@elanser.demon.nl] has joined #ubuntu === Fallen_Angel i have a problem with apache2 php5 with charset display ! Can Someone help me ??????? === Ruben_ud [n=Lost@213-156-55-136.fastres.net] has joined #ubuntu === mode/#ubuntu [+o LjL] by ChanServ === Fallen_Angel [n=info@213.175.95.175] has left #ubuntu [requested] === mode/#ubuntu [-o LjL] by LjL === Ruben_ud [n=Lost@213-156-55-136.fastres.net] has left #ubuntu ["Leaving"] === Fallen_Angel [n=info@213.175.95.175] has joined #ubuntu [04:32] my text is grey am i actually posting in the channel? [04:32] solevita: no worries [04:33] Syn_Flood: yes [04:33] Syn_Flood: Yes, I can read your messages fine :) [04:33] sweet [04:33] just making sure :) === magical_trevsky [n=magical@80-45-41-53.static.dsl.as9105.com] has joined #ubuntu [04:33] Trixsey, a release comes out every 6 months. meanwhile, packages are *not* updated, i.e. you won't get new versions. the only updates you get are fixes to security vulnerabilities and to very serious bugs === broyce [n=broyce@cpe-24-27-29-30.austin.res.rr.com] has joined #ubuntu === RodrigoX [n=Rodrigo@201-74-134-179-sj.cpe.vivax.com.br] has joined #ubuntu [04:34] I'm not a complete noob but I get frustrated easy with linux :) [04:34] i have got gnome-vlc_0.8.5-svn20060208-1ubuntu1_i386. What does one do install it? just double click? [04:34] Trixsey, then there is an (unsupported) "backports" repository where some packages from the next (development) version are ported back to the current version. but only a few packages end up there [04:34] anyone know if its possible to run fglrx and nvidia-glx kernel sources on the same machine? apt only wants one or the other === test3422 [n=test@220-245-202-201-wa-pppoe.tpgi.com.au] has left #ubuntu [] === Alakazamz0r [n=Alakazam@198.170.183.130] has joined #ubuntu === Doulby [n=faxing@ARouen-252-1-139-8.w86-215.abo.wanadoo.fr] has joined #ubuntu [04:35] anyone? === glatzor [n=sebi@p54967B5F.dip.t-dialin.net] has joined #ubuntu [04:35] ive even removed all modes except 1024x768, and its still 800x600 === fnf [n=fnf@58.187.93.118] has joined #ubuntu [04:35] its like xorg isnt reading my monitors sync ranges. [04:35] Alakazamz0r: run sudo dpkg-reconfigure xserver-xorg, and take care to select the right monitor parameters [04:35] is there a quick command to display system details, ie cpu, hdd, ram etc? [04:35] i just did that. === fnf [n=fnf@58.187.93.118] has left #ubuntu [] [04:35] Alakazamz0r, it might be that your driver is only supporting 800x600? [04:35] i even went into advanced settings LjL === fnf [n=fnf@58.187.93.118] has joined #ubuntu === denver [n=denver@12.107.36.226] has joined #Ubuntu [04:36] Syn_Flood, i downloaded/installed it from nvidia.com [04:36] what driver are you using? [04:36] LOL JEWS [04:36] Alakazamz0r: and you used the sync ranges are reported on your monitor's manual? [04:36] LOL UBUNTU === mode/#ubuntu [+o LjL] by ChanServ [04:36] nv or nvidia? === mode/#ubuntu [+b *!*@201.57.76.72] by LjL === zomgkickbanmepls [n=crapz0r@201.57.76.72] has left #ubuntu [requested] [04:36] yes LjL === mikefoo [n=mikefoo@166.84.140.254] has joined #ubuntu === mode/#ubuntu [-o LjL] by LjL === Vaun [n=jws141@pool-151-204-24-71.pskn.east.verizon.net] has joined #ubuntu === xgm [n=xgm@84.15.67.76] has joined #ubuntu === eno-zzz is now known as eno [04:36] LjL, has he been doing this all day? === IA-Outdoors [n=chatzill@www.iowaoutdoors.org] has joined #ubuntu [04:36] thats whats weird LjL [04:36] Alakazamz0r === elate [n=elate@82.152.117.217] has joined #ubuntu [04:36] Hello, im using 6.06, and I have 6.10 alternate install cd, how to upgrade with that cd ? === fnf [n=fnf@58.187.93.118] has left #ubuntu [] === leafw [n=Any@cbg-off-client.mpi-cbg.de] has joined #ubuntu [04:37] hastesaver, uh? don't know, i joined a few minutes ago... [04:37] is there any email client for ubuntu that enables whitelisting? [04:37] Ubotu, please tell xgm about upgrade [04:37] Does anybody know how to use AlsaMixer?? [04:37] what's the trick to get ndis setup under ubuntu? I don't see any package matching 'ndis' [04:37] yeah dave_ [04:37] LjL, ok. Because I came here sometime earlier in the day and I saw something similar happen... the price of popularity, I guess [04:37] what driver are you using? [04:37] this is my monitor http://support.dell.com/support/edocs/monitors/p780/ [04:37] nv or nvidia? [04:37] dave_, nvidia [04:37] ...that's using adept, of course [04:37] nv works correctly. [04:37] !upgrade [04:37] For upgrading, see instructions at: https://help.ubuntu.com/community/UpgradeNotes (you can also find this in the channel topic: type "/topic") - See also !downgrade [04:37] hastesaver, trolls abound, yes. [04:37] Alakazamz0r, is it a newer graphics card? [04:38] mx440, no it isnt === dope_ [n=dope@70-20.202-68.tampabay.res.rr.com] has joined #ubuntu [04:38] Afternoon all :) [04:38] xgm, the CD probably has a cdromupgrade or something, running it should do [04:38] hey [04:38] so i open up a terminal and i want to run bitchx how do i do that without losing control of the terminal to bitchx? [04:38] Alakazamz0r, so you *only* have 1024x768 in your xorg.conf? for all depths? [04:38] hastesaver: there isn't such thing [04:39] yes [04:39] crazy eh [04:39] dope_ : open a 'screen' first [04:39] how do i do that [04:39] dope_ : type screen === sally2 [n=sally2@208.233.32.40] has left #ubuntu [] [04:39] ah ok, thx buddy [04:39] Alakazamz0r: that's quite weird because i believed X wouldn't boot at all if none of the graphics modes set were available [04:39] Alakazamz0r: how did you restart X after changing the settings last time? [04:39] dope_ : and remember: man screen [04:39] :D [04:39] i know, whats what i thought also. [04:39] kill -9 pid of X [04:40] /etc/init.d/gdm restart [04:40] lemme try something else...brb [04:40] Alakazamz0r, the latter should more than suff [04:40] LjL, could Alakazamz0r do the three button salute [04:40] ...ice [04:40] :) [04:40] How to upgrade from 6.06 to 6.10 with alternate CD ? [04:40] what is is ctrl, alt, backspace? [04:40] xgm: set the repository to be the CD [04:40] Syn_Flood: yeah but restarting gdm should be fne as well [04:40] just wondering :) === abes [n=abes@rn-v1w2a13.uwaterloo.ca] has joined #ubuntu [04:41] !upgrade | xgm [04:41] xgm: For upgrading, see instructions at: https://help.ubuntu.com/community/UpgradeNotes (you can also find this in the channel topic: type "/topic") - See also !downgrade [04:41] xgm: << If you have the Edgy Alternate Install CD (not the Desktop CD), you can save bandwidth by using: gksu "sh /cdrom/cdromupgrade" >> [04:41] LjL, do you have any experience with Evolution and MS exchange? by chance :) === calavera [n=calavera@195.Red-80-26-32.staticIP.rima-tde.net] has joined #ubuntu [04:41] Syn_Flood: not really [04:41] how do you play Dvix an Xvid on ubuntu? [04:41] and* [04:41] kool [04:41] thnnks === jobless_ [n=venkat@ip24-253-204-168.ok.ok.cox.net] has joined #ubuntu [04:42] abes: depnds on what player you wanna use [04:42] abes : with vlc, using proper decoders. [04:42] Ubotu, please tell abes about divx [04:42] leafw: totem can do that quite well as well [04:42] abes : search for 'vlc' in synaptic. === incorrect [n=fwest@193.82.117.250] has joined #ubuntu [04:42] anyone here using evolution with ms exchange? [04:42] ifireball : not so good experiences with totem on powerpc, whereas vlc works everywhere so far. === SirTwist [n=carsten@td9091bcf.pool.terralink.de] has joined #ubuntu [04:42] hey i have a problem installing ubuntu on dell xps 700.. the installation freezes .. anyone tried it ! [04:43] leafw: is vlc a player? === thijs [n=thijsbur@ip54557dac.adsl-surfen.hetnet.nl] has joined #ubuntu [04:43] abes : yes. [04:43] Hi [04:43] I must do something spetial when deleting programs installed from DEB packages? Or only delete program dir + configs? === Alakazamz0r [n=root@198.170.183.130] has joined #ubuntu [04:43] ok [04:43] abes : a very nice one by the way [04:43] leafw: VLC geve me quite a buggy experiance on Linux [04:43] can anyone shed some light on this error? http://pastebin.ca/244259 [04:43] i uninstalled all the ubuntu drivers. [04:43] how remove het x server [04:43] for vid. [04:43] ? [04:43] !deb [04:43] deb is the Debian package format, also used by Ubuntu. To install .deb files, simply double-click on them (Ubuntu) or right-click and select Kubuntu Package Menu->install (Kubuntu) [04:43] i've installed the fglrx module and configure my xorg.conf, in my logs im getting "DRI initialization failed!" says i get 2d but not 3d, anyone seen this before? === SirTwist [n=carsten@td9091bcf.pool.terralink.de] has left #ubuntu ["Leaving"] [04:43] for ubuntu [04:43] ifireball : vlc has evolved a lot from dapper to edgy. [04:43] im rebuilding the kernel module. [04:43] thijs: why do you want to remove it? [04:43] St_MPA3b, "apt-get remove ", as usual [04:43] St_MPA3b: use apt-get/synaptic/dpkg to remove the deb [04:43] is there any email client for ubuntu that enables whitelisting? === Caplain_ [n=matt@154.detroit-06-08rs.mi.dial-access.att.net] has joined #ubuntu [04:44] St_MPA3b, I meant, use whatever you usually use to remove installed programs [04:44] i've gotta go bye :) [04:44] leafw: I donno, I'ev been tracking them for years, lately they seem too windows-oriented for me === Subhuman|L [n=jack@host86-142-54-172.range86-142.btcentralplus.com] has joined #ubuntu [04:44] ifireball : well, in choice there is freedom! [04:44] !downgrade [04:44] Attempting to downgrade to an older Ubuntu version is explicitly not supported, and may break your system. [04:44] :/ === Elischa [n=rassihu@M3785P009.adsl.highway.telekom.at] has joined #ubuntu [04:44] also this error for kiba-dock any help i would appreciate. http://pastebin.ca/244261 === mode/#ubuntu [+o LjL] by ChanServ === mode/#ubuntu [-b *!*@201.57.76.72] by LjL === mode/#ubuntu [-o LjL] by LjL [04:46] bannination! === sethk [n=seth@amethyst.cql.com] has joined #ubuntu [04:46] Is there any tool that allows me to configure my WLAN with 'preferred networks', so that it'll connect to whichever is in range at the current time? (One is encrypted, other is open) === adnans [n=adnans@linuxgoeroe.demon.nl] has joined #ubuntu [04:46] brb [04:47] hm... it cant ununttall seamonkey that was installed from .deb downloaded from mozilla website [04:47] hey i have a problem installing ubuntu on dell xps 700.. the installation freezes .. anyone tried it ! === mostafa_as3ad [n=mostafa@82.201.236.68] has joined #ubuntu [04:47] daxxar, wpasupplicant [04:47] uninstall* === Alakazamz0r [n=Alakazam@198.170.183.130] has joined #ubuntu [04:47] St_MPA3b, what was the package called? [04:47] jobless_: where does it freeze? [04:47] no, i don't have an xps700 [04:47] St_MPA3b, use apt-get to remove, use package name === ik5sft [n=ik5sft@host80-173-dynamic.6-87-r.retail.telecomitalia.it] has joined #ubuntu [04:48] oh... it wasnt .deb... [04:48] nice [04:48] that mesage was 4 u) [04:48] segfault, wpasupplicant allows me to set 'preferred order' on a bunch of networks? THanks, I'll look at it. === ogrl [n=otuschho@p54A72FFC.dip0.t-ipconnect.de] has joined #ubuntu === Strykar [n=wakka@59.95.32.250] has joined #ubuntu [04:48] St_MPA3b, what was it was it if not deb [04:48] I'm having troubles with my /etc/fstab... can someone give/paste me theirs (preferrably with vfat systems) [04:48] i will remove X window (gui) [04:48] how to? [04:49] thijs : specify more. What do you want to do? [04:49] i will remove the x window system [04:49] and the ubuntu gui [04:49] thijs : sudo apt-get remove xorg-xserver [04:49] only cmd line === abes [n=abes@rn-v1w2a14.uwaterloo.ca] has joined #ubuntu [04:49] very Tnx !! DX [04:50] thijs : but there may be more packages, run an autoremove afterwards. [04:50] ok i have vlc - where can i get codecs? [04:50] 8-) [04:50] leafw: that's xserver-xorg, and it won't remove much i'm afraid [04:50] LjL : with autoremove it will, for those packages were indirectly isntalled [04:50] thijs: perhaps if you want a server install, you could use the server version === TheJF [n=redfox@mctnnbsa30w-156034049202.nb.aliant.net] has joined #ubuntu [04:50] ow oke === Vaun [n=jws141@pool-151-204-24-71.pskn.east.verizon.net] has joined #ubuntu [04:50] very tnx === mrdude [n=dave@c-71-192-158-89.hsd1.ma.comcast.net] has joined #ubuntu === RetLaw [n=RetLaw@082-146-105-101.dyn.adsl.xs4all.be] has joined #ubuntu === njan [n=james@about/security/staff/njan] has joined #ubuntu [04:51] leafw, i'm not going to try that, but i doubt it... removing ubuntu-desktop won't make autoremove remove anything else === ChaKy [n=chaky@0-59.dsl.iskon.hr] has joined #ubuntu === matiit [i=matiit@bfs249.neoplus.adsl.tpnet.pl] has joined #ubuntu [04:51] cze [04:51] the packages that are installed by default aren't marked as autoremovable, otherwise it'd be a mess [04:51] ./ [04:51] can anyone tell me how to get codecs? === slight [n=a@cpc1-brig5-0-0-cust19.brig.cable.ntl.com] has joined #ubuntu [04:51] exeutable === quiet [n=quiet@unixcorps/staff/quiet] has joined #ubuntu [04:51] waht codecs [04:51] ? [04:51] you'd probably have more luck with `sudo apt-get remove libx11-6` [04:51] is it possible to run two window managers? beryl for one and just metacity or kwin for the second? when i run beryl my 2nd desktop goes useless === infinito [n=infinito@75.Red-80-59-227.staticIP.rima-tde.net] has joined #ubuntu [04:51] xdiv [04:51] ? [04:52] ore what? [04:52] ubotu: tell abes about codecs === geek00L[6] is now known as mysql-C === xgm [n=xgm@84.15.67.76] has joined #ubuntu === observatour [n=pingwiar@dfm233.neoplus.adsl.tpnet.pl] has joined #ubuntu === proppy [n=ubuntu@free.mekensleep.com] has left #ubuntu [] [04:52] !enter|thijs [04:52] thijs: Please don't use the "enter" key as punctuation! It spams the channel and can be annoying. [04:52] LjL, thijs : to ensure the shot, do a dpkg-quer -W --showformat='${Package}\t${Status}\n' | grep "ok installed" | grep "xserver" | less === oneseventeen [n=chatzill@206.169.15.5] has joined #ubuntu [04:52] sorry [04:52] and then remove whatever is there with apt-get. === matiit [i=matiit@bfs249.neoplus.adsl.tpnet.pl] has left #ubuntu [] [04:52] ore use aptude [04:52] that was dpk-query === PouUbnn2 [n=PouUbnn2@bas7-ottawa23-1088832413.dsl.bell.ca] has joined #ubuntu === Alakazamz0r [n=Alakazam@198.170.183.130] has joined #ubuntu [04:53] St_MPA3b, delete the files it installed [04:53] ok [04:53] hum, dpkg-query (my typing!) [04:53] im going to put my conf file in a paste bin [04:53] ty [04:53] I have an Edgy Eft server setup in VMware (running on an Ubuntu Breezy box), and every time the screen blanks, it looses its network connection. When I hit a key on the keyboard, it is immediately available. [04:53] tnxi go bye [04:53] ./canel [04:53] I'm getting random crashes in various apps since upgrading to edgy (clean install). Mainly FF and gnome-terminal, which are known issues, but also other apps just randomly closing and not being caught by bug buddy or whatever it's called. i've run memtestx86 and that came up clean [04:53] cool, tremulous is in the multiverse! === thijs [n=thijsbur@ip54557dac.adsl-surfen.hetnet.nl] has left #ubuntu [] === samigaru [n=samigaru@218.93.201.146] has joined #ubuntu [04:53] any suggestions what i should file a bug against? [04:53] LjL, http://pastebin.com/820467 [04:53] How do I keep my Edgy Virtual Machine from loosing network connectivity? [04:54] Or is there a way to keep the server install from blanking the screen? [04:54] Hello, is there any tool in 6.06 or 6.10 (except firestarter) to share internet connection from eth0 to eth1 ? I got my connection from router to eth0 by cable, and i want to make connection sharing like in windows, to share connection from 1 lan card to another, becouze im using 2 computers and they are connected by cables, sorry for my english :P [04:54] slight: ask on launchpad [04:54] and im @ 800x600@50hz [04:54] weird? i think so. [04:54] slight: or, file a bug against gnome-terminal and someone will a assign it to the proper place === wishlog [n=newbie@h246228.resnet.cuhk.edu.hk] has joined #ubuntu [04:54] Toma-, #launchpad? [04:54] slight: google: launchpad ;D [04:54] Alakazamz0r: any hints on the log file? [04:55] Alakazamz0r: i think so too, and i'm not sure what to try [04:55] i know launchpad, but there's an awful lot of it [04:55] xgm: can't you share through your router? [04:55] let me check ifireball [04:55] what do you mean by 'ask on launchpad' [04:55] dorto: no === andrem [n=andre@its-corp-10-0072.iowatelecom.com] has joined #ubuntu === g333k_work [n=gonzalo@200.48.115.175] has joined #ubuntu [04:55] xgm: connect internet to router; then connect all the computers to that router [04:55] I've got an archive split using WinRar, so I've got .r00, .r01 .r02 files etc. How can I recombine the archives in Edgy? [04:55] slight: theres a support box you can ask it [04:55] I want to make connection sharing thru lan cards [04:55] Toma-, right thanks === avernus [i=avernus@sverige.freeshell.ORG] has joined #ubuntu [04:55] dorto: its impossible, all slots are used [04:55] np [04:56] supposingly i have Ogg Theora installed, but I still cant play movies - what can it be? [04:56] and I want to share connection by lan cards [04:56] xgm: connect a hub or a switch into one slot on the router, then connect more computers to the hub/switch === [DOW] Shaddar [n=_DOW_Sha@p54A7D4D4.dip.t-dialin.net] has joined #ubuntu [04:56] xgm: you can share the connection from a gnu/linux box using iptables [04:56] timhaughton, you don't need to "recombine" them, when they're extracted it will Just Work === saxin [n=saxin@216-138-34.0513.adsl.tele2.no] has joined #ubuntu [04:56] <[DOW] Shaddar> hi [04:56] dorto: can you help me do that ? === sgorilla71 [n=tlp@user-0cet8gf.cable.mindspring.com] has joined #ubuntu === ubuntu__ [n=ubuntu@dvm130.internetdsl.tpnet.pl] has joined #ubuntu [04:57] brb ifireball im going to write to a fresh log [04:57] gparted does not partitions USB harddisks ? [04:57] using a fresh conf file [04:57] czesc === erUSUL [n=erUSUL@248.Red-83-35-0.dynamicIP.rima-tde.net] has joined #ubuntu [04:57] is there anything better than squirrelmail? [04:57] jest tutqaj jakis polak ? [04:57] also what is the best spam filtering program? === ambimom [n=ambimom@pool-141-150-12-237.mad.east.verizon.net] has joined #ubuntu [04:58] spamassasin [04:58] xgm: I don't remember the commands, I used to do that long back when I had no routers; you should be easily able to find the procedure by google searching [04:58] sgorilla71: gmail :) === mRs- [n=server@p54814446.dip.t-dialin.net] has joined #ubuntu === goara [n=joni@c201081.adsl.hansenet.de] has joined #ubuntu === netpython [n=petnytho@wikipedia/netpython] has joined #ubuntu [04:58] strabes: thats what i use =) === lixteru [n=benny@u44-236.dsl.vianetworks.de] has joined #ubuntu === Riot777 [n=riot777@unaffiliated/riot777] has joined #ubuntu === lixteru [n=benny@u44-236.dsl.vianetworks.de] has left #ubuntu [] [04:59] strabes: i guess you can host domains on it also, but i want to host some stuff on my server [04:59] sgorilla71: the depends on taste, I like "horde" (doon if its available on ubuntu though) === bettyboop1975 [n=bettyboo@213-140-21-233.fastres.net] has joined #ubuntu [04:59] <[DOW] Shaddar> someone here experienced in the update-system of ubuntu and kubuntu (especially which one is better for a linux-beginner) ? [04:59] Toma-: spamassassin isnt that good === [DOW] Shaddar is now known as Shaddar [04:59] ifireball: is there anything with AJAX functionality? === ambimom [n=ambimom@pool-141-150-12-237.mad.east.verizon.net] has joined #ubuntu === g333k_work [n=gonzalo@200.48.115.175] has joined #ubuntu === das-q [n=das-q@p54BFEBBB.dip.t-dialin.net] has joined #ubuntu [05:00] Shaddar, whats up? === Mogz [n=max@h138n5fls34o1041.telia.com] has left #ubuntu ["Lmnar"] === Renan_s2 [n=Renan@201.86.199.81.adsl.gvt.net.br] has joined #Ubuntu === Flats [n=Flats@c-68-38-79-89.hsd1.nj.comcast.net] has joined #ubuntu [05:00] sgorilla71: I think newer horde version may have some, I havn't setup any webmail servers in a long time... [05:00] is in Ubuntu (not Kubuntu) /opt directory made by default after install? === Alakazamz0r [n=Alakazam@198.170.183.130] has joined #ubuntu [05:01] Good morning, I want to set up a webcam on Ubuntu. Can anyone recommend a good cam that will work well? === the-mr-freak [n=chris@pD9E0B8A7.dip.t-dialin.net] has joined #ubuntu === eggauah [n=daniel@201.72.63.61] has joined #ubuntu [05:01] ifireball: i will check it out [05:02] which update-system is easier fpr beginners to handle ... adept (from kubuntu) or the one of ubuntu (don't know which name it has) [05:02] Riot777: seems so, I got one and I don't remeber making it... my system is a 3rd generation upgrade though, not a clean install === abowo [n=abowo@ies-mila-bcn.xtec.net] has joined #ubuntu === Salah_ [n=Salah@195.80-202-89.nextgentel.com] has joined #ubuntu [05:02] @ subhuman [05:02] ah === abowo [n=abowo@ies-mila-bcn.xtec.net] has left #ubuntu ["Abandonando"] [05:02] I need to know is it after fresh install === Salah__ [n=pakkisfa@195.80-202-89.nextgentel.com] has joined #ubuntu === lux__ is now known as lux` [05:03] LjL, ifireball http://pastebin.com/820474 [05:03] Shaddar: its synaptic in ubuntu, but both are not for beginners, a beginner should use the add/remove applet in ubunto and the auto-update notification icon [05:03] there's my log [05:03] i see nothing :( === scythe128 [n=chatzill@208-46-123-50.dia.static.qwest.net] has joined #ubuntu [05:03] Shaddar, synaptic is the most user-friendly for beginners [05:03] Flats, http://ralph.n3rds.net/index.php?/archives/124-Webcam-installation-scripts.html === ro1 [n=ron@port0034-afo-adsl.cwjamaica.com] has joined #Ubuntu === gilnim [n=gilnim@unaffiliated/gilnim] has joined #ubuntu [05:04] Flats, https://help.ubuntu.com/community/Webcam === pingwiarz [n=pingwiar@dft28.neoplus.adsl.tpnet.pl] has joined #ubuntu [05:04] anyone hae problems with synaptic starting from the menu? Mine will only launch from cli === Blacken [n=ed@edward-ropple.um.maine.edu] has joined #ubuntu === rc55 [n=rc55@82.152.146.214] has joined #ubuntu [05:04] root@unixadmin:~# glxinfo |grep rend [05:04] direct rendering: Yes [05:04] OpenGL renderer string: GeForce2 MX/AGP/SSE2 [05:04] its working, just not at the correct resolution. [05:04] scythe128, and if you make a shortcut on the desktop? [05:04] Hey i'm having some issues with my wireless on Edgy [05:05] havent, I dont like shortcuts on my destop [05:05] i worked at fixing it [05:05] Alakazamz0r: there is your hint: # [05:05] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode [05:05] # [05:05] (WW) NVIDIA(0): "nvidia-auto-select". [05:05] just wondering if this problem is wider spread than me [05:05] I was wondering - is there any sort of server management front end for ubuntu? [05:05] aah === hh [n=hhr@0x3e42a191.adsl.cybercity.dk] has joined #ubuntu === Hattori [n=ciccio@xd-85-20-186-246.mi2.albacom.net] has joined #ubuntu === genon [n=genon@87.96.161.30] has joined #ubuntu [05:05] k, so for the beginning ubuntu is better for me than kubuntu ? (for adept i have a good url to search repositories, for synaptic nothing (not searched for yet) ... that's why i'm asking :) [05:05] scythe128, not that i know [05:06] thanks guys [05:06] rc55, admin for what? [05:06] but im at a point where i need a pointer [05:06] can anyone hlp === hh [n=hhr@0x3e42a191.adsl.cybercity.dk] has left #ubuntu [] [05:06] ? wireless === lakin [n=lakin@S01060013101832ce.cg.shawcable.net] has joined #ubuntu [05:06] !wireless [05:06] Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs === Walm [n=blaa@walm.xs4all.nl] has joined #ubuntu [05:06] hmm... ifireball ... what do you sugguest. [05:06] thx [05:06] shadder, it doepends on what you prefer, kde or gnome [05:06] i mean, if you need a server, you should know how to admin one on the CLI - phpmyadmin is a ncie web based mysql admin app. [05:06] Subhuman: something like the windows server administration console, a central location for managing users, computers, shares, printers etc [05:06] thanks [05:06] Alakazamz0r: try removing the 'Option "DPMS"' line see what happens === mysql-C is now known as scarymovie [05:06] I typically use DIA for diagrams, but it's so buggy. What is the diagram editor of choice for ubunteros these days? === mRs- [n=server@p54814446.dip.t-dialin.net] has joined #ubuntu [05:07] netpython: yeah wireless === fulld [n=fulld@pool-70-20-216-66.phil.east.verizon.net] has joined #ubuntu [05:07] ok === Manny [n=chris@p5496C5BF.dip0.t-ipconnect.de] has joined #ubuntu [05:07] brb [05:07] lakin, like flowcharting? === PacketScan [n=PacketSc@ool-45763453.dyn.optonline.net] has joined #ubuntu [05:07] i prefer gnome (it's appearance) [05:07] i use Kivio for that. [05:07] hello [05:07] i have a question about mailman [05:07] Subhuman: General diagrams. Geometric shapes, arrows, lines etc. I'll try kivio === tatiane [n=tatiane@201009043051.user.veloxzone.com.br] has joined #ubuntu [05:07] could somebody help me? [05:07] plz? [05:08] Walm, State the nature of your problem [05:08] cant help of you dont tell us what the problem is walm === RetLaw [n=RetLaw@082-146-105-101.dyn.adsl.xs4all.be] has joined #ubuntu === Metal_Militia [n=ioppo@host-84-222-34-212.cust-adsl.tiscali.it] has joined #ubuntu [05:09] jbroome it feezes just after unpacking the kernel! [05:09] I'm dealing with an opteron laptop. when I place the 64bit cd, it complains saying it is a 32bit system. However, after starting with 32bit CD, the system info app says the CPU is a K8 Athlon64/Opteron === IA-Outdoors [n=chatzill@www.iowaoutdoors.org] has joined #ubuntu [05:09] can anyone tell me how to completely get rid of kiba-dock and kxdocker? [05:09] how do I find the device name of my wireless card. ndiswrapper -l confirms the driver is loaded and hardware is present [05:09] (laptop is about 1 year old) [05:09] iwconfig doesn't show a valid device with wireless extensions === _jl_ [n=JL@81.56.129.104] has joined #ubuntu [05:10] well when i configure a maillinglist in my browser , it doesn't save the settings into the cfg file [05:10] IA-Outdoors: no it doesnt === NChief [n=nchief@ti500720a080-9948.bb.online.no] has joined #ubuntu [05:10] anybody here with fresh Ubuntu (not kubuntu) install ? [05:10] Riot777: me, dapper, just patched [05:10] ro1: uh, so what am I to do? [05:10] IA-Outdoors: you can try lshw -C [05:10] rc55: tell me do you have /opt directory by default ? [05:10] in your / root dir [05:11] Riot777: I'll just boot it, it's a VM [05:11] ah ok [05:11] for example when i change the subject_prefix into foo and i press the submit your changes button , after reloading of the page the setting is still the same as before [05:11] scythe128 : are the aspects of user-friendlyness and existing update-databases nearly the same at adept / synaptic ? or are there any profoundly differences betwenn them ? [05:11] Can anybody tell me why Rhythmbox Music player plays Mp3's at double speed (or more)? all the tracks sounds as though the singer's been breathing in helium, they play ok in gxine [05:11] Walm, It would help to know which browser you're referring to === meng [n=meng@218.208.251.195] has joined #ubuntu === noelferreira [n=noel@84.90.183.246] has joined #ubuntu [05:11] how fresh riot, I installed about a week back [05:12] ro1 what value is -C expecting? [05:12] the wi-fi card has been detected (I have eth1 :-))) ) How do I search for wireless ? === BlackTopBum [n=BlackTop@host-69-145-209-65.chy-wy.client.bresnan.net] has joined #ubuntu [05:12] Riot777: I'm booting it, it takes 2/3 mins [05:12] CheshireViking: I had this happen to me with some fuged files... [05:12] ok === BlackTopBum_ [n=BlackTop@host-69-145-209-65.chy-wy.client.bresnan.net] has joined #ubuntu [05:12] netpython : ie6.0 and firefox [05:12] scythe128: do you have /opt dir there ? === Alex_Palex [n=alex@adsl-ull-252-235.42-151.net24.it] has joined #ubuntu === Rouchee [n=rouchee@218.19.3.76] has joined #ubuntu [05:12] in / root dir === cherubiel [n=cherubie@unaffiliated/cherubiel] has joined #ubuntu [05:12] IA-Outdoors: it's specific to listing hardware re: you network connections === BlackTopBum [n=BlackTop@host-69-145-209-65.chy-wy.client.bresnan.net] has left #ubuntu ["Ex-Chat"] [05:13] or perhaps, how do I scan for wireless networks? === feihung [n=kid@125.164.176.134] has joined #ubuntu [05:13] guillem101: kismet [05:13] what repo is needed to install firestarter ? [05:13] shadder, it doesnt matter, gnome is used in ubuntu, kde is used in kubuntu... they both use synaptic though [05:13] ifireball: i wondered that, but they're files that work fine on other players [05:13] Riot777: /opt is there [05:13] guillem101: airodump [05:13] how do I keep my ubuntu server's console from going black after inactivity? === MidMark [n=marco@host-84-220-99-167.cust-adsl.tiscali.it] has joined #ubuntu [05:13] ok [05:14] I tried to install ubuntu 6.10(x64), and first of all, after i pressed start ubuntu from the boot CD the loading screen was black/white.. and second after the loading, the monitor turned it self of..(no signal) I tried serval monitors and safe graphics mode.... I have a ATI x800 gfx. amd athlon64 3000+.. 1024mb ram.. [05:14] shadder, the only difference in the systems is the window manager, so its more which are you more comfortable with [05:14] Riot777: it is empty though === BlackTopBum_ [n=BlackTop@host-69-145-209-65.chy-wy.client.bresnan.net] has left #ubuntu ["Ex-Chat"] [05:14] ty [05:14] oh ^^ so my repositories for adept work in ubuntu too ? @ scythe128 [05:14] what repo is needed to install firestarter ? [05:14] note likely === bo__bo [n=ben@dialup-4.160.243.188.Dial1.Cincinnati1.Level3.net] has joined #ubuntu [05:14] guillem101: iwlist scan [05:14] sgorilla71, thanks, I'll try them later on, since they seem not to be available at liveCD [05:15] !firestarter [05:15] Ubuntu, like any other linux distribution, has firewall capabilities built-in. The firewall is managed using the 'iptables' command (see https://help.ubuntu.com/community/IptablesHowTo), or GUI applications such as Firestarter (Gnome) or Guarddog (KDE). [05:15] !info firestarter [05:15] firestarter: gtk program for managing and observing your firewall. In component universe, is optional. Version 1.0.3-1.2ubuntu3 (edgy), package size 383 kB, installed size 1884 kB === thansen [n=thansen@137.65.168.36] has joined #ubuntu [05:15] cherubiel, thanks a lot (No scan results) (I guess it is OK here) [05:15] NChief, i have that black&white too on amd64, they are working on it [05:15] Hello, I have question I have external harddrive 200 giga, I formatted with reiserfx from ubuntu , my problem is I can read the drive but can not write to it, please help [05:15] xgm: ^^ [05:15] is there a procedure to enable upstart on a dist-upgraded ubuntu? === Sniper| [n=sniper@151.82.0.121] has joined #ubuntu === BlackTopBum [n=BlackTop@host-69-145-209-65.chy-wy.client.bresnan.net] has joined #ubuntu [05:15] whoot ?:D [05:15] netpython: ok, thx [05:15] shadder, not liketly, you should uncomment the repositories in your /etc/apt/sources.list and that will give you a massive amounts of software [05:15] guillem101: it depends, do you have the drivers installed OK ? [05:15] IA-Outdoors: How's the progress [05:15] NChief, np [05:15] ro1: there is no logical name tied to my wirless, though, I see the card listed [05:16] cherubiel, ifconfig -a shows eth1 === JuJuBee [n=JuJuBee@greenville.k12.ny.us] has joined #ubuntu [05:16] guillem101: yo, thats good :) [05:16] cherubiel, I have done nothing but placing the liveCD !! [05:16] I see both my ethernet card and wireless. ethernet has eth0, wireless has nada [05:16] IA-Outdoors: ok this might help https://help.ubuntu.com/community/WifiDocs/WirelessTroubleShootingGuide [05:16] guillem101: its pretty neat, most wireless works out of the box === Alakazamz0r [n=Alakazam@198.170.183.130] has joined #ubuntu [05:16] ok, thanks scythe ... then i'm going to test ubuntu :) [05:16] cherubiel, however I never used a wireless card before, so I was asking to make my mind up === Carnage\ [n=CarNagE@dslb-084-056-234-113.pools.arcor-ip.net] has joined #ubuntu === Sniper| [n=sniper@151.82.0.121] has left #ubuntu [] === DerD [n=derd2@p54B3E631.dip.t-dialin.net] has joined #ubuntu [05:16] nothing... im gonna do some googling. [05:17] let's install [05:17] is there a way to log on to my companies PDC w/ubuntu? [05:17] Hello, I have question I have external harddrive 200 giga, I formatted with reiserfx from ubuntu , my problem is I can read the drive but can not write to it, please help [05:17] guillem101: it works like any other OS, if not better .. i've been on wireless ever since i installed dapper :P [05:17] die winxp, die muuuhahhahhaha [05:17] ia-outdoors, what wireless card do you have? === genon [n=genon@87.96.161.30] has left #ubuntu [] === gnomeguy [n=gnomeguy@pool-72-95-7-35.hrbgpa.east.verizon.net] has joined #ubuntu [05:17] netgear wg511v2 === PlanarPlatypus [n=alucard@62.49.159.206] has joined #ubuntu === AskHL [n=ask@82.211.196.173] has joined #ubuntu [05:17] I had this working earlier this week under gentoo [05:17] feihung: what permissions are on it? === [DOW] Shaddar [n=_DOW_Sha@p54A7D4D4.dip.t-dialin.net] has joined #ubuntu [05:17] my thinkpad wifi card was working out of box, my desktop ones took some.. tweaking;) [05:18] guillem101: there is a package called wifi-radar, there is a daemon as well ... install and get your wireless autoconfigured at boot [05:18] yeah, support for this card sux...I have to use ndis === [Deathmaster] [n=Linux@ns4.g23.net] has joined #ubuntu [05:18] Any Xubuntu users on this channel currently? === Yvonne [n=01101110@pdpc/supporter/active/Yvonne] has joined #ubuntu [05:19] jrib: how I can cek the permission for this drive I have typed sudo chmod 777 /media/usbdisk [05:19] BlackTopBum, go to #xubuntu [05:19] cherubiel, OK, I've taken a note about these tools. I thank you very much. I guess I may ask further questions in several hours (or perhaps tomorrow) :-))) [05:19] ia-outdoors, where does it fall exactly? [05:19] what do you mean? [05:19] ailean - thanks ! [05:19] feihung: type 'mount' [05:20] ia-outdoors, how far does it work, does ndiswrapper find it okay [05:20] feihung: you' prolly have to mod your /etc/fstab === lbm [n=lbm@82.192.173.92] has joined #ubuntu [05:20] ia-outdoors, sorry if you've already said, wasn't paying attention;) === BlackTopBum [n=BlackTop@host-69-145-209-65.chy-wy.client.bresnan.net] has left #ubuntu ["Ex-Chat"] [05:20] ndis says it's installed and hardware detected === St_MPA3b [n=St_MPA3b@client3.pike.net.ru] has joined #ubuntu [05:20] So I have 4 drives raided, raid 1 on /boot - I had a drive die, so I replaced it, but system only boots with the three working drives, not the new one installed. it hangs at "GRUB" - What can I do to boot system so I can cp partition table and add back to the array? === mathrick is now known as mathrick|away [05:20] feihung: try 'touch /media/usbdisk/foo' [05:20] ia-outdoors, and modprobing ndiswrapper goes okay? [05:21] IA-Outdoors: you should try madwifi, the Anthros chipset *is* supposed to be supported [05:21] I just type mount and it shows /dev/sda8 on /media/usbdisk-1 type reiserfs (rw,nosuid,nodev) [05:21] !xgl [05:21] Compiz (compositing window manager) and XGL (X server architecture layered on top of OpenGL) - Howto at http://help.ubuntu.com/community/CompositeManager - Help in #ubuntu-xgl - See http://tinyurl.com/pw5ez for Kubuntu systems === scythe128 [n=scythe@208-46-123-50.dia.static.qwest.net] has joined #ubuntu [05:21] cherubiel: I did that once upon a time but it wasn't working on older 2.6 kernels [05:21] IA-Outdoors: ah.. [05:21] in fact most the googling I see has most people using my card under ndis [05:21] St_MPA3b: try beryl [05:22] CarinArr: you are on to something. modprobe ndiswrapper fails === Vanuatoo [n=vano@host-85-114-227-35.adsl.caucasus.net] has joined #ubuntu [05:22] wiki.beryl-project.org #ubuntu-xgl [05:22] feihung: is there an entry corresponding to this mount in fstab? === xchat81 [n=overmind@host81-5-dynamic.11-87-r.retail.telecomitalia.it] has joined #ubuntu [05:22] does ubuntu not provide ndis support in kernel by default? [05:22] why isn't tomboy in the menu by default? [05:22] ia-outdoors, are you using the packaged ndiswrapper or own compile? [05:22] packaged === bronze_|| [n=Lester@c-71-233-244-55.hsd1.ma.comcast.net] has joined #ubuntu [05:22] to get my ndiswrapper working i had to compile them manually [05:23] hrm [05:23] ailean: it's meant to be run as a panel applet I believe [05:23] cause modprobe kept failing no matter what i did;) === Vanuatoo [n=vano@host-85-114-227-35.adsl.caucasus.net] has left #ubuntu [] [05:23] jrib, i see it now :) [05:23] i can't run x server and internet doesn't work =( how to access to usb? [05:23] mikefoo: [05:23] And what happened to the menu editor that was in dapper? [05:23] !ndiswrapper [05:23] Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs [05:23] CarinArr: were you getting something like ndiswrapper.ko Invalid Argument [05:23] !ndis === graveson [n=graveson@212.71.37.101] has joined #ubuntu [05:23] netpython: ? [05:23] ia-outdoors, i can't remember to be honest, could have been [05:24] just checking [05:24] ia-outdoors, basically i was looking at several guides and for troubleshooting with my problems all said "try recompiling" [05:24] well, I guess I'll try doing that then [05:24] it was very straightforward to compile tho === SS2 [n=SS2@dslb-084-057-054-081.pools.arcor-ip.net] has joined #ubuntu [05:24] jrib yeah it's working the file is there but I can not copy and paste to this drive ??? what is touch [05:24] offline ! [05:24] !usb [05:24] Sorry, I don't know anything about usb - try searching on http://bots.ubuntulinux.nl/factoids.cgi [05:25] how to access to usb? [05:25] from terminal === glazed_eyes [n=BW@202.153.39.211] has joined #ubuntu [05:25] feihung: touch creates a blank file among other things. Are you trying to copy to a subdirectory or something? === susscorfa [n=trala@haar160.athome220.WAU.NL] has joined #ubuntu [05:25] Hattori: most usb devices are emulated as scsi, try mounting sda1 etc [05:25] I just copy one text file to there === bo__bo [n=ben@dialup-4.160.243.188.Dial1.Cincinnati1.Level3.net] has left #ubuntu [] [05:26] feihung: it should work, paste the output [05:26] cherubiel: can you give me the escat command please? [05:26] Hi all [05:26] jrib I can write the blank file confused but can not paste file to it [05:26] escat=exact ;} [05:26] Hattori: try to do a mount /dev/sda1 /somefolder === MarcN [n=marc@dslv-1-139.mv.com] has joined #ubuntu === dudanogueira [n=duda@unaffiliated/bitdoidao/x-000001] has joined #ubuntu [05:26] Is there anyone with an HP laserjet 1020? === rednaxel [n=rednaxel@201.47.209.127.adsl.gvt.net.br] has joined #ubuntu [05:26] how can i detect the wireless connections on my range? [05:27] i have a slightly deeper issue with my wireless [05:27] feihung: try 'cp ~/somefile /media/usbdisk', what does that say? [05:27] hi all [05:27] can someone help [05:27] where are my .deb's downloaded to? [05:27] using apt of course [05:27] i installed the network-manager-gnome, but cant see how to run it [05:27] i am starting xsane and it opens and just closes , how can i troubleshoot this [05:27] dudanogueira: install wifi-radar or kismet [05:27] scythe128: /var/cache/apt/archives/ [05:27] scythe128, /var/cache/apt/archives === LinAsH [n=missmagu@179.211.119-80.rev.gaoland.net] has joined #ubuntu [05:27] If I copy ~/.evolution, ~/.xchat and ,~/.gaim then I can get back all configurations, logs and other user data for those applications and just put them into a new edgy system? [05:28] thanks [05:28] XiXaQ, probably === raghu206 [n=raghu@202.63.100.54] has joined #ubuntu [05:28] XiXaQ, you have to figure out for where the program send the files.. usually, it sends to .directory === Versed` [n=Versed@c-69-253-173-154.hsd1.nj.comcast.net] has joined #ubuntu [05:28] CarinArr: that was it [05:28] recompiled ndis and I'm gold [05:29] cherubiel: it says me i have to specify the kind of filesystem [05:29] Hattori: what device do yo have? [05:29] jrib: thanks yeah it's working from terminal , why I can not do it from nautilus === gilnim [n=gilnim@unaffiliated/gilnim] has joined #ubuntu [05:29] usb storage key [05:29] fat [05:29] Hattori: was it mac os(hpfs) formatted or vfat? [05:29] so under ubuntu what's the trick to get ndis added on boot and have the windows drivers loaded automatically along wtih the write config settings? [05:29] last night I installed the latest NVIDIA driver, Version: 1.0-9629 - and managed to get Beryl working, all wonderful... today the X does not start anymore, complains about different versions of kernel modules [05:29] mount -t vfat /dev/sda1 /somedir [05:29] Hello, how to share internet connection from eth0 to eth1 using iptables? Im doing this becouse my other pc(os: win xp) is conected by cable from eth1, so i want to make connection sharing, but i dont know how. can anyone help me ? === timawa [n=root@58.69.50.162] has joined #ubuntu [05:30] feihung: try closing nautilus and opening it again, maybe it needs to refresh what it thinks the properties are (maybe 'reload' works too) [05:30] I would be very thankfull [05:30] what happened to the menu editor that was in dapper? [05:30] hey i ran a lshw and found this *-network:0 DISABLED [05:30] what's the package name that will let firefox display chinese characters OK, rather than as 4 hex digits in a square? [05:30] how do i enable it === glazed_eyes [n=BW@202.153.39.211] has joined #ubuntu [05:30] does anyone know if ubuntu has a similar program to chkconfig, and if so, what it's called? [05:31] dooglus: look in view -> character encoding in your firefox [05:31] anyone here managed to get AIGLX/Beryl working with Edgy and NVIDIA 1.0-9629 ?!? [05:31] i tried modprobe nut i dont know what the name of the module is === ChaKy [n=chaky@0-59.dsl.iskon.hr] has joined #ubuntu [05:31] rednaxel, i do [05:31] (64bit) [05:31] but I do [05:31] magical_trevsky: that is supposed to check the status of daemons/services, right? === krabador [n=valeria@d81-211-252-62.cust.tele2.it] has joined #ubuntu [05:31] no problems, and I've reboot some time ago === rag [n=rag@58.Red-80-24-33.staticIP.rima-tde.net] has joined #ubuntu [05:31] guillem101, did you compiled your kernel or something? [05:32] cherubiel, yeah [05:32] magical_trevsky: if yes, /etc/init.d/ status [05:32] cherubiel: works.. how to copy an entire dir? [05:32] rednaxel, I was using nvidia installer but I used the repositories later on === rooks [n=andrew@218-214-12-32.people.net.au] has joined #ubuntu === Webspot [n=andrew@5ac260a2.bb.sky.com] has joined #ubuntu [05:32] jrib: OK thanks :-) === bo__bo [n=bobo@dialup-4.160.243.188.Dial1.Cincinnati1.Level3.net] has joined #ubuntu [05:32] I would be very thankfull [05:32] Hello, how to share internet connection from eth0 to eth1 using iptables? Im doing this becouse my other pc(os: win xp) is conected by cable from eth1, so i want to make connection sharing, but i dont know how. can anyone help me ? [05:32] rednaxel, arre you using the installer?? [05:32] cherubiel, I want to use it to add a new service though [05:32] guillem101, yes === martin_bfg10k [n=Martin@201.250.233.175] has joined #ubuntu === Lurkan [n=agsm@189.142.106.4] has joined #ubuntu [05:32] feihung: np [05:32] hello all [05:32] cherubiel, where I would normally use 'chkconfig --add' [05:32] guillem101, is there a repo with version 1.0-9629 ?!? [05:32] rednaxel, then the problem may be that you have upgraded your kernel === St_MPA3b [n=St_MPA3b@client3.pike.net.ru] has joined #ubuntu [05:33] rednaxel, yes, there are repos === bronze_|| [n=Lester@c-71-233-244-55.hsd1.ma.comcast.net] has left #ubuntu ["Hey] === boubar [n=moroz@149.152.191.253] has joined #ubuntu [05:33] magical_trvsky: man update-rc.d [05:33] let me check [05:33] guillem101, it's a fresh install of Edgy [05:33] i have issues on using dapper as router, caching dns server. Router can ping internet hosts but not from workstation. I can, however, use dig on internet hosts from the workstation. === PapaLion [n=will@137.141.235.130] has joined #ubuntu [05:33] chkconfig doesn't exist in debian/ubuntu [05:33] boink, thanks [05:33] netpython: thought about mailman? (A) === Webspot [n=andrew@5ac260a2.bb.sky.com] has left #ubuntu [] [05:33] !info mailman [05:33] Hattori: cp -r ? [05:33] mailman: Powerful, web-based mailing list manager. In component main, is optional. Version 1:2.1.8-2ubuntu2 (edgy), package size 7824 kB, installed size 36552 kB === Vaun [n=jws141@pool-151-204-24-71.pskn.east.verizon.net] has joined #ubuntu [05:33] mailman works quite well [05:33] and it gives the users a nice webinterface === athlon [n=siregar@blanchett.rz.uni-frankfurt.de] has joined #ubuntu [05:34] but my favourite ML is ezmlm :) [05:34] I cannot reach the mouse right now... rednaxel , check the beryl home page, at the wiki they have the repos for the drivers [05:34] how can I play a cue/bin without burning a cd? [05:34] have used mailman for a long while. very stable, never had any issues with it === arrai [n=arrai@dslb-084-060-248-088.pools.arcor-ip.net] has joined #ubuntu === sudharsh [n=sudharsh@59.92.42.12] has joined #ubuntu [05:34] it's good, yeah === Doulby [n=faxing@ARouen-252-1-139-8.w86-215.abo.wanadoo.fr] has left #ubuntu ["Quitte"] [05:34] boink or boubar do you know why i cant same changes from the webinterface === timawa [n=root@58.69.50.162] has left #ubuntu [] [05:34] same=save [05:34] rednaxel, alternatively you might run "nvidia-installer" and get gujded by the program. I guess it will compile the kernel module [05:34] i am starting xsane and it opens and just closes , how can i troubleshoot this === estong_ [n=root@58.69.50.162] has joined #ubuntu [05:35] Hello, how to share internet connection from eth0 to eth1 using iptables? Im doing this becouse my other pc(os: win xp) is conected by cable from eth1, so i want to make connection sharing, but i dont know how. can anyone help me ? [05:35] Walm: What happens when you try to save changes? error msg or any sort? [05:35] boubar: nothing at all , even not in /var/log/mailman/error [05:35] xgm, firestarter does the trick for you === Versed` [n=Versed@c-69-253-173-154.hsd1.nj.comcast.net] has joined #ubuntu [05:35] magical_trevsky: you should try /etc/rc.local, which is executed after every boot; not sure on other methods - sorry. [05:35] what is the standard module name for a wireless card ? [05:36] what repo should i add to install firestarter ? === St_MPA3b [n=St_MPA3b@client3.pike.net.ru] has joined #ubuntu [05:36] !info firestarter [05:36] firestarter: gtk program for managing and observing your firewall. In component universe, is optional. Version 1.0.3-1.2ubuntu3 (edgy), package size 383 kB, installed size 1884 kB [05:36] xgm: ^^ [05:36] xgm, I don't know if it is universe or multiverse [05:36] anyone using guarddog? [05:36] oh [05:36] Walm: Weird... see what your apache logs say [05:36] or firestarter? [05:36] it looks to me it doesnt write to /var/lib/mailman/lists/sharpo/config.pck [05:36] i cannot do a modprobe without knowing, can someone please help [05:36] cherubiel, you are my hero :-) [05:36] cherubiel: what ? [05:36] nah, i'm just a guardian angel ;) [05:36] ro1, there is not, it depends of your card [05:37] xgm: its universal [05:37] xgm, universe [05:37] xgm: you can try !info [05:37] [Thu Nov 09 10:15:57 2006] [error] [client 10.0.0.158] script not found or unable to stat: /usr/lib/cgi-bin/mailman/icons, referer: https://walm.xs4all.nl/cgi-bin/mailman/listinfo [05:37] !info firestarter [05:37] firestarter: gtk program for managing and observing your firewall. In component universe, is optional. Version 1.0.3-1.2ubuntu3 (edgy), package size 383 kB, installed size 1884 kB [05:37] scythe128, shorewall === estong_ [n=root@58.69.50.162] has left #ubuntu [] === user-land [n=user-lan@217-162-168-80.dclient.hispeed.ch] has joined #ubuntu [05:37] so i just need to write into terminal: sudo apt-get install firestarter ? [05:37] !shorewall [05:37] Ubuntu, like any other linux distribution, has firewall capabilities built-in. The firewall is managed using the 'iptables' command (see https://help.ubuntu.com/community/IptablesHowTo), or GUI applications such as Firestarter (Gnome) or Guarddog (KDE). [05:37] scythe128, i can help you with the setup if you want [05:37] and afther that run it ? [05:37] xgm, firestarter is a very simple gtk app that lets you do such simple configurations without hassle [05:37] boubar: or attempt to invoke directory as script: /usr/lib/cgi-bin/mailman/ [05:38] LinAsH: ok, going to do a bit more research will be right back [05:38] xgm: apt-get update; after you add the repos to /etc/apt/sources.lst === bazin [n=bazin@golem.clnet.cz] has joined #ubuntu === zoetrope666 [n=admin@mppp-p-144-139-119-126.prem.tmns.net.au] has joined #ubuntu [05:38] xgm: then try apt-get install firestarter [05:38] xgm, you run firestarter (with sudo) and the setup wizzard is self-explanatory === pitti [i=pitti@ubuntu/member/pitti] has joined #ubuntu [05:38] Well, I am just toying with it right now and was wondering about peoples opinion [05:38] boubar: looks it is going to a wrong director [05:38] hello all [05:38] shorewall, is the the fork of ipcop/smoothwall? === Cholito [n=alejandr@87.218.66.37] has joined #ubuntu === pcin [n=pcin@59.52.30.101] has joined #ubuntu === thansen [n=thansen@137.65.168.36] has joined #ubuntu [05:38] no [05:38] how to know what repos should i add ? === jipi_ [n=jipi@cm133.gamma150.maxonline.com.sg] has joined #ubuntu [05:39] scythe128, http://www.shorewall.net/ === CtHuLhu^-^ [n=luca@host84-49-dynamic.17-87-r.retail.telecomitalia.it] has joined #ubuntu [05:39] LinAsH: how do i find it out... the module name based on the name of my card [05:39] xgm: try !info , it WILL show the repo [05:39] Walm: strange indeed. I do remember when I installed it, I had to do some manual items as well... [05:39] !info firestarter [05:39] thanks for the link [05:39] firestarter: gtk program for managing and observing your firewall. In component universe, is optional. Version 1.0.3-1.2ubuntu3 (edgy), package size 383 kB, installed size 1884 kB [05:39] ro1: start with lspci, [05:39] and ? === deflux- [n=tdondich@c-71-202-5-132.hsd1.ca.comcast.net] has joined #ubuntu [05:39] i need linux-headers for my build. i don't have interent access on linux box, so i have to put on a usb storage key. where can i download linux-headers i need? [05:39] xgm: . In component universe, is optional. Version 1.0.3-1.2ubuntu3 (edgy), package size 383 kB, installed size 1884 kB === genon [n=genon@87.96.161.30] has joined #ubuntu [05:39] boubar: probably used a guide / howto? === C-O-L-T [n=None@89.34.166.178] has joined #ubuntu === graveson [n=graveson@212.71.37.92] has joined #ubuntu [05:40] so i dont need to add any repos for firestarteR ? [05:40] xgm, if you are not very strict, having universe and multiverse repos enabled is quite useful. You can enable them easily at synaptic [05:40] ro1, try this 'lspci |grep Network' or just lspci === okami [n=gord@bas1-toronto01-1177658592.dsl.bell.ca] has joined #ubuntu [05:40] kk [05:40] cherubiel: ok i located my wireless info === sunyata [n=chris@c-24-19-26-184.hsd1.wa.comcast.net] has joined #ubuntu [05:40] i need linux-headers for my build. i don't have interent access on linux box, so i have to put on a usb storage key. where can i download linux-headers i need? [05:40] ro1: btw tat was beerware [05:40] LinAsH: ok will try [05:40] I think Ill pass on shorewall for now [05:41] Hattori: check packages.ubuntu.com === St_MPA3b [n=St_MPA3b@client3.pike.net.ru] has joined #ubuntu === cryptonic [n=cryptoni@212.2.170.69] has joined #ubuntu [05:41] scythe128, 1 min setup well depends on how fast you can type === humbraro [n=humbraro@mail.richardmrogerspc.com] has joined #ubuntu [05:41] not on this laptop [05:41] the r key is flakey [05:41] scythe128, :-) [05:41] LinAsH: found it, what do i do with info [05:41] I have the very common problem with nvidia and it only displaying 800x600, edited the xorg.conf, and 1600x1200 is in the front, tried to reconfigure xorg.conf and it still doesn't work [05:42] ro1, so what is it ? [05:42] I just wanted something to shutdown my ipchains a little === hriostat [i=hriostat@201.89.31.233] has joined #ubuntu === babwe2 [n=poul@0x3e42bcbd.adsl.cybercity.dk] has joined #ubuntu [05:42] genon: do you have the drivesr installed properly? [05:42] LinAsH: 00:09.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01) [05:42] ro1: what *info* did you find? care to share? [05:42] scythe128, guarddog will do fine [05:42] I normally am behind a spi firewall [05:42] cherubiel: yeah, i have the nvidia setting in the system tool-bar === JDahl [n=joachim@3e6b711d.rev.stofanet.dk] has joined #ubuntu [05:42] or when Im at work Im behind all types of layerd security [05:42] hello everybody.. someone could help me with a question? [05:42] thanx === pitti [i=pitti@ubuntu/member/pitti] has left #ubuntu ["bye"] [05:43] scythe128, welcome [05:43] cherubiel: saw it, i need to get it up and running [05:43] cherubiel: got the display up to 1600x1200, but after i restarted x trying to fix my Hz not synching right it went back to zero [05:43] ro1, try modprobe prism54 === jipi_ [n=jipi@cm133.gamma150.maxonline.com.sg] has left #ubuntu ["Leaving"] [05:44] ro1, or modprobe prism2_pci [05:44] LinAsH: ok, but why prism54 (learning purposes) === fescuder [n=fescuder@82.198.125.90] has joined #ubuntu [05:44] 1600X1200? Id be glad to get 1280X768 (not in the 855 or 955 screen resolution tools) [05:44] LinAsH: ok [05:44] hello === tester [n=tester@cpe-76-187-37-52.tx.res.rr.com] has joined #ubuntu [05:45] your name [05:45] LinAsH: i did it... no response [05:45] how to start beryl manager in startup? any script [05:45] scythe128: i did manage to get it up there, but the hz stopped at 60 [05:45] ola === lucas [n=lucas@h30n4c1o1124.bredband.skanova.com] has joined #ubuntu === Crescendo_ [n=martinda@adsl-072-151-080-148.sip.rmo.bellsouth.net] has joined #ubuntu [05:45] ro1, the modules are located at /lib/modules/2.6.17-10-generic/kernel/drivers/net/wireless/ try to find the good one ;) === lucas [n=lucas@h30n4c1o1124.bredband.skanova.com] has left #ubuntu ["Leaving"] === Lattyware [n=Latty@host86-134-67-133.range86-134.btcentralplus.com] has joined #ubuntu [05:45] There is some tool to backup ubuntu config files? === suprsonic [n=suprsoni@24-183-61-241.dhcp.mdsn.wi.charter.com] has joined #ubuntu [05:45] ro1: prism card usually work out of the box; ifconfig -a ? [05:45] cherubiel: if i have 2.6.17-10-generic, is it right if i download linux-headers-2.6.17-10-generic_2.6.17-10.33_i386.deb ? [05:46] fescuder: ola! === wastrel [n=wastrel@dsl254-127-242.nyc1.dsl.speakeasy.net] has joined #ubuntu === ttrygve [n=trelvik@campuseai.expedient.com] has joined #ubuntu [05:46] Anyone know a good how-to for having my server email me when there is a brute force attack in progress? === ttrygve [n=trelvik@campuseai.expedient.com] has left #ubuntu [] [05:46] no kiero namas ke con max [05:46] yes [05:46] !br [05:46] Por favor use #ubuntu-br ou #ubuntu-pt para ajuda em portugus. Obrigada. [05:46] !es fescuder [05:46] es: An extensible shell based on `rc'. In component universe, is optional. Version 0.90beta1-10.1 (edgy), package size 99 kB, installed size 248 kB [05:46] oops! [05:46] cherubiel: it was working when i had Dapper running, since edgy, it went dead.... or asleep rather [05:46] si [05:46] cherubiel: if i have 2.6.17-10-generic, is it right if i download linux-headers-2.6.17-10-generic_2.6.17-10.33_i386.deb ? [05:46] !es | fescuder [05:46] fescuder: Para Espaol por favor usen #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendrn mas ayuda. [05:46] hahaha === ttrygve [n=trelvik@campuseai.expedient.com] has joined #ubuntu [05:47] no [05:47] inggimol === Sartak [n=Sartak@250-190.adsl1.netlojix.net] has joined #ubuntu === samigaru [n=samigaru@218.93.201.146] has joined #ubuntu [05:47] olA [05:47] cherubiel: if i have 2.6.17-10-generic, is it right if i download linux-headers-2.6.17-10-generic_2.6.17-10.33_i386.deb ? === BenC_ [i=bcollins@conference/ubuntuconf/x-127ef41eeaab2429] has joined #ubuntu === Ayabara [n=anders@84.210.83.52] has joined #ubuntu [05:47] Hattori: that is ok. [05:47] ok [05:47] Hattori:yes [05:48] how to install it? [05:48] dpkg -i ? [05:48] Hattori: yep === androxxl [n=andro@84-255-238-62.static.dsl.t-2.net] has joined #ubuntu === citr0n_ [n=jko@62.79.77.47.dhcp.aaa.tiscali.dk] has joined #ubuntu === del4 [n=del@S01060050bfa2ff46.va.shawcable.net] has joined #ubuntu [05:48] what app can I use to join mpeg files in ubuntu? [05:49] I just bought a tv tuner card. Is there an easy way to test it under Edgy? It's supported by the kernel and all the right modules are loaded, but I didnt manage to configure mythtv correctly === hybrid [n=x@72.169.30.254] has joined #ubuntu === hriostat [i=hriostat@201.89.31.233] has left #ubuntu [] === JosefK [n=brett@82-42-147-9.cable.ubr01.sprt.blueyonder.co.uk] has joined #ubuntu [05:49] LinAsH: i found it [05:50] LinAsH: Prism54 and so on === Adnarim [n=goldstei@p54A5120B.dip0.t-ipconnect.de] has joined #ubuntu [05:50] LinAsH: where do i go from here [05:50] hi === smoenux [n=smoenux@dsl-242-37-100.telkomadsl.co.za] has joined #ubuntu [05:50] Hi all [05:50] I'm new to linux and I need to execute a file named: check.sh but how do I execute such files under linux? [05:51] ro1, run network-admin === samigaru [n=samigaru@218.93.201.146] has joined #ubuntu [05:51] nobody who got any ideas? === mumbles-off is now known as mumbles === SirTwist [n=carsten@td9091c02.pool.terralink.de] has joined #ubuntu [05:51] can someone please help me with my Router and NAT setup in linux? just a link will do ^.^ === SirTwist [n=carsten@td9091c02.pool.terralink.de] has left #ubuntu ["Leaving"] === suprsonic [n=suprsoni@24-183-61-241.dhcp.mdsn.wi.charter.com] has left #ubuntu [] [05:51] How do I find out what device (as in /dev/???) outputs my sound? [05:52] !alsa | tuna-fish [05:52] tuna-fish: If you're having problems with sound, first ensure ALSA is selected, by double clicking on the volume control, then File -> Change Device (ALSA Mixer). If you are still having problems with sound, see https://help.ubuntu.com/community/DebuggingSoundProblems and http://alsa.opensrc.org/index.php?page=DmixPlugin === MitchM [i=fwuser@208.243.85.3] has joined #ubuntu [05:52] genon: if it's not in your path (echo $PATH), you need to specify the path explicitly. do this by cd'ing to the same path as the script, and typing './check.sh' [05:52] smoenux: http://www.google.com/search?q=linux+firewall+iptables&ie=utf-8&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a [05:52] LinAsH: In that is a .ko file i used vi to open it and it's... I ran it already it as a matter a fact showed me wlan0 but it's configs say wired connections [05:52] ty, jbroome [05:52] genon: it's also worth checking the script has exec permissions with 'chmod 755 check.sh' [05:52] thx JosefK === ryu [n=chris@unaffiliated/ryu] has joined #ubuntu [05:52] JosefK: uhm, check what script? [05:53] sorry genon, attached the wrong name to the question, my bad === Bassetts [n=Bassetts@cpc2-mapp1-0-0-cust630.nott.cable.ntl.com] has joined #ubuntu [05:53] LinAsH: though it says wired i enabled it [05:54] JosefK: oh, ok, I tought I hade missed something completely :P [05:54] LinAsH: but still no progress, im in that path you gave me but what do i do when i get there === RazRew [n=chatzill@pD9524E5D.dip0.t-ipconnect.de] has joined #ubuntu [05:54] does iwconfig list wlan0 ? [05:54] jepp [05:55] LinAsH: yeah it does === bazin [n=bazin@golem.clnet.cz] has joined #ubuntu [05:55] JosefK I need to be admin as i think to execute this script but what is the su password on ubuntu? the one I took to login doesnt work for me?!? [05:55] noone? I use avidemux to join avi files, but I need an app to join mpeg files [05:55] Adnarim: before you do that, I'd make damn sure you trust the source of the script [05:55] Adnarim: after that, just prepend the command with 'sudo' and use your own password, ie. 'sudo ./check.sh' [05:56] ro1, what kind of network do you want to connect to ? wep protected ? wpa ? === SS2 [n=SS2@dslb-084-057-054-081.pools.arcor-ip.net] has joined #ubuntu [05:56] yes it's from ati to check the version of my xfree86 because I need graphics driver installed [05:56] Adnarim: then 'sudo ./check.sh' === C-O-L-T [n=None@89.34.166.178] has left #ubuntu [] === man [n=mac@62.15.210.118] has joined #ubuntu [05:56] !sudo | Adnarim [05:56] Adnarim: sudo is a command to run programs with superuser privileges ("root"). Look at https://help.ubuntu.com/community/RootSudo for all information. === dra [n=dra@p57A50DA8.dip0.t-ipconnect.de] has joined #ubuntu [05:56] ro1, and do you have a dhcp server ? === socomm [n=socomm@cpe-76-166-49-201.socal.res.rr.com] has joined #ubuntu [05:57] anybody from italy? === ChaKy [n=chaky@0-59.dsl.iskon.hr] has joined #ubuntu [05:57] it doesnt work [05:57] anyone know how to control speedstep in edgy? [05:57] goldstein@goldstein-laptop:~/Desktop$ !sudo ./check.sh [05:57] sudo ./check.sh [05:57] sudo: ./check.sh: command not found === asdx [n=ubuntu@200.85.40.178] has joined #ubuntu [05:57] hi [05:58] LinAsH: how do i find that out, I am trying to connect to an unprotected network === MetaMorfoziS [n=sajt@dsl54009EFA.pool.t-online.hu] has joined #ubuntu [05:58] how do i install beryl/nvidia 9626 in ubuntu [05:58] edgy [05:58] but the file check.sh is definitv on my desktop === pcin [n=pcin@59.52.30.101] has joined #ubuntu [05:59] I have the very common problem with nvidia and it only displaying 800x600, edited the xorg.conf, and 1600x1200 is in the front, tried to reconfigure xorg.conf and it still doesn't work, and I have the proper drivers, and they are installed, as I have the nvidia-tool in the System Tool-bar [05:59] a easy/fast system to crypt files with a password by shell? [05:59] Adnarim, sh check.sh [05:59] or sh ~/Desktop/check.sh [05:59] ro1, try 'sudo ifconfig wlan0 up && sudo dhclient wlan0' and see if you get an IP address [05:59] thx quiet this works [06:00] LinAsH: msg says, no such device === JabberWokky [n=evan@71.58.60.115] has joined #ubuntu [06:00] Adnarim, you didn't have check.sh set as executable. [06:00] chmod +xcheck.sh [06:00] er. === IA-Outdoors [n=chatzill@ip66-43-220-221.static.ishsi.com] has joined #ubuntu [06:00] chmod +x check.sh [06:00] genon: is it in front for the bit-depth you're using? [06:00] but he sais I have no console ownership ? === JabberWokky [n=evan@71.58.60.115] has left #ubuntu [] === jwise [n=jwise@221.219.117.241] has joined #ubuntu [06:01] how do i change my screensaver settings in ubuntu? === Arepie [n=arepie@219.95.92.6] has joined #ubuntu [06:01] You are either not running this script from the console [06:01] or simply do not have console ownership. Requirement failed. [06:01] Unable to determine XFree86 Version. Stopping now. [06:01] hello,my dears, I have some trouble with im-switch. [06:01] sudo sh check.sh [06:01] ro1, what the name of the interface when you run iwconfig ? [06:01] how do I configure ubuntu to apply my wireless settings on boot that I've been doing manually via iwconfig? [06:01] but I did it with sudo [06:01] do it without sudo. [06:01] !network-manager-gnome | IA-Outdoors [06:01] network-manager-gnome: network management framework (GNOME frontend). In component main, is optional. Version 0.6.3-2ubuntu6 (edgy), package size 245 kB, installed size 1608 kB [06:01] I'm trying to install scim,and set it, using "im-switch -s scim-pinyin" [06:01] IA-Outdoors: that works pretty nicely for me [06:02] JosefK: any options under KDE? [06:02] and, I'm using root... [06:02] !network-manager-kde [06:02] Sorry, I don't know anything about network-manager-kde - try searching on http://bots.ubuntulinux.nl/factoids.cgi [06:02] lol === andin [n=andin@dslb-084-063-041-015.pools.arcor-ip.net] has joined #ubuntu === SS2 [n=SS2@dslb-084-057-054-081.pools.arcor-ip.net] has joined #ubuntu [06:02] err.. it's qt-network-manager or something, search the cache for network-manager and grep for kde/qt [06:02] Well, it tell me the error "No system wide default defined just for locale en_US " [06:02] IA-Outdoors: it's definitely in there, takes most of the hassle out of using wireless and linux [06:02] I get the same error with sudo sh check.sh and sh check.sh [06:02] anyone help me?,thanks [06:02] JosefK: thx [06:02] Adnarim, what isyour username? === splatch [n=splatch@bur91-1-82-230-69-69.fbx.proxad.net] has joined #ubuntu === nocti [n=nocti@203.76.200.4] has joined #ubuntu [06:03] goldstein [06:03] Adnarim, what does ls -l check.sh show? === andin [n=andin@dslb-084-063-041-015.pools.arcor-ip.net] has left #ubuntu ["...] [06:03] JosefK: you mean knetworkmanager? [06:03] ia-outdoors, i still haven't managed to get mine to stick on boot;) === hoelk [n=hoelk@h081217035104.dyn.cm.kabsi.at] has joined #ubuntu [06:03] IA-Outdoors: that'll be the one, thanks :) a while since I used kubuntu === epinephrine [i=geek@82-37-152-150.cable.ubr01.wals.blueyonder.co.uk] has joined #ubuntu === Gorxon [n=Gorxon13@062016238240.customer.alfanett.no] has joined #ubuntu [06:03] del4 ... try this: http://www.ubuntuforums.org/showthread.php?t=198809&highlight=screensaver === kitche [n=dragon@pool-70-16-39-100.buff.east.verizon.net] has joined #ubuntu === nocti [i=nocti@203.76.200.4] has joined #ubuntu [06:04] quiet the output is: -rw-r--r-- 1 goldstein goldstein 11873 2006-11-09 17:45 check.sh [06:04] CarinArr: if that doesn't work then I'll be scripting it in .bash_profile [06:04] ia-outdoors, no matter what i put in the network configurations, so i've just written a script file i run when i log in === Hese_ [n=heikki@addr-82-128-207-182.suomi.net] has joined #ubuntu === Farm_Fresh [n=daryl@c-68-85-72-195.hsd1.fl.comcast.net] has joined #ubuntu [06:04] which works fine [06:04] right, same approach [06:04] JosefK: yes it's in the front, and 1280x1024 behind, but he doesn't accept that one either [06:04] bit of a hack but i got sick and tired of fiddling [06:04] Adnarim, strange... do chmod +x check.sh and then sudo ./check.sh [06:04] !automatrix [06:04] Sorry, I don't know anything about automatrix - try searching on http://bots.ubuntulinux.nl/factoids.cgi [06:04] Hi, I have a little problem...trying the liveCD and my resolution wont go higher than x480. Thus I cant see the whole install dialog so I cant install Ubuntu...any suggestions? [06:04] im using vmware-player, i use easyvmx, to create my .vmx file.. but, when i load the file.. and insert a bootable cd, it says i have nothing in my cdrom.. and im using sata hard disk.. is there any any effect? === davi1 [n=dave@84-72-101-249.dclient.hispeed.ch] has joined #ubuntu [06:05] !automatix [06:05] automatix is a script that tries to install some software, and often fails and breaks systems. We don't provide support for it, and we strongly discourage its use. === krabador [n=valeria@d81-211-252-62.cust.tele2.it] has left #ubuntu [] === JRGC_ [n=jaime@F5488.f.strato-dslnet.de] has joined #ubuntu [06:05] Gorxon, open aterminal and see what xrandr -s 800x600 gives you? === pielgrzym [n=pielgrzy@nat-ruczaj.lama.pl] has joined #ubuntu [06:05] quiet, Adnarim could be a bash/dash thing ? [06:05] dash? [06:05] #ubuntu [06:05] smeonux thanks. :) [06:05] FTW [06:06] Adnarim: are you on dapper or edgy? [06:06] !dash [06:06] Size 800x600 not found in available modes [06:06] /bin/sh links to the DASH shell in Ubuntu Edgy (6.10). Since DASH is not 100% compatible with the BASH shell, some scripts might break. You can make scripts execute using BASH by changing the first line of the script to "#!/bin/bash" [06:06] edgy === Xaice [n=icebreak@dslb-084-062-035-253.pools.arcor-ip.net] has joined #ubuntu [06:06] Ok, so whats the deal with automatix? No good? === Qwell[] [i=qwell@nat/digium/x-7526117a117c5a72] has joined #ubuntu [06:06] oh ew.. [06:06] Farm_Fresh, no, no good. [06:06] but the same error again quiet === Fallen_Angel [n=info@83.241.25.39] has joined #ubuntu === Acrune [n=Acrune_@pool-151-196-50-122.balt.east.verizon.net] has joined #ubuntu [06:06] quiet: Why? === ricflazz [n=franco@formula.fcla.edu] has joined #ubuntu [06:07] problem (sry for my bad english, but at the german support chan theres nobody who can help me...): since ive updated my ubuntu to edgy, my (pci) wlancard is detected as an ETHERNET card... can sb help me fixing that? i work now on an older kernel which is working perfectly... === M0E^lnx [n=M0E@216.110.0.30] has joined #ubuntu [06:07] LinAsH: nothing comes up on iwconfig, but going to Network admin it says wlan0 [06:07] why does ubuntu not have rubygems in the repository? [06:07] So, after upgrading from Dapper to Edgy, my gnome is acting a bit...funky. I can't run certain applications (gnome-terminal), and I somehow completely lost the ability to alt-tab... === JoshH [i=josh@josh.xmission.com] has joined #ubuntu [06:07] Farm_Fresh, use it and find out. === feydin [n=hagbard@e177172207.adsl.alicedsl.de] has joined #ubuntu [06:07] what is the right console? bash dash ? [06:07] Adnarim, try bash check.sh [06:07] kinda stupid to design an install program that requires over 640x480 res tho... [06:07] does anyone know where I can get this key ? http://media.blutkind.org/xgl/quinn.key.asc [06:07] k [06:07] oh, and in order to bring a window to the front, I have to click the title bar now.. that's new [06:07] that site is down... I think it got hacked === thaytan [n=jan@core.fluendo.com] has joined #ubuntu [06:07] hey there can anyone recommend me a good tool to add audio to an existing video? (mp3) [06:07] also the same error [06:07] but if my res would go higher I wouldnt complain [06:08] quiet: The only reason I ask is because the reviews off its web page seem good. === nocti_ [i=nocti@203.76.198.202] has joined #ubuntu [06:08] anyone know why my LD_LIBRARY_PATH (set in ~/.profile) is being reset on login these days? [06:08] and cant resize the dialog [06:08] to less than 640 [06:08] anyone know any good repositories for XGL/Compiz? === brp [n=brp@88.157.50.220] has joined #ubuntu === Otacon22 [n=otacon22@85-18-201-171.ip.fastwebnet.it] has joined #ubuntu === nocti_ [i=nocti@203.76.198.202] has joined #ubuntu === pcin_ [n=pcin@59.52.30.101] has joined #ubuntu [06:10] problem (sry for my bad english, but at the german support chan theres nobody who can help me...): since ive updated my ubuntu to edgy, my (pci) wlancard is detected as an ETHERNET card... can sb help me fixing that? i work now on an older kernel which is working perfectly... === brp [n=brp@88.157.50.220] has joined #ubuntu === Jtastrophe [n=J@207.160.174.3] has joined #ubuntu [06:10] maybe the hardware detection works wrong... or a driver is not loaded... or... xD === VisualStation [n=visualst@225.135-66-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu === Adnarim [n=goldstei@p54A5120B.dip0.t-ipconnect.de] has left #ubuntu [] === optimusprime [n=k@54-202-165-66.rev.knet.ca] has joined #ubuntu === Xaice [n=icebreak@dslb-084-062-035-253.pools.arcor-ip.net] has joined #ubuntu [06:11] ro1, you said that iwconfig list wlan0, check if the module is loaded : lsmod | grep prism === ruda_ [n=ruda@trrdsv-aww.wrk.terra.com.br] has joined #ubuntu [06:11] ok [06:11] is there a way to make a bootable Win XP CD through Ubuntu? [06:11] anyone here running compiz? [06:12] LinAsH: prism2_pci [06:12] hmm, something strange: when I finish downloading stuff ubuntu (X) gets slooooowww [06:12] can you insmod the driver module and assign the card that driver (more technical than I can help with though) [06:12] if you already have one, optimusprime [06:12] so no one can help me? [06:12] dreamer, you on a laptop? [06:12] get higher res on live cd [06:12] nop === nocti_ [n=nocti@203.76.198.202] has joined #ubuntu === shriphani [n=shriphan@219.91.188.167] has joined #ubuntu [06:13] it's really the mouse though [06:13] oh, well there goes my speedstep guess :) === genon [n=genon@87.96.161.30] has left #ubuntu [] [06:13] typing and switching between workspaces seems to go fine .. === joachim-n [n=joachim@ACC97FB0.ipt.aol.com] has joined #ubuntu [06:13] speedstep ? === Xappe [i=xappe@razorconsulting.net] has joined #ubuntu [06:13] it really happens when I literally _finish_ a download === M0E^lnx needs to get xgl working [06:14] I have it in valknut and bittorrent now [06:14] powersaving built into intel and amd processors to make them run slower and save battery on mobile chips === davi1 [n=dave@84-72-101-249.dclient.hispeed.ch] has left #ubuntu [] [06:14] if I already have what?....the Win XP bootable CD? [06:14] ok === Admiral_Chicago [n=freddy@66.99.72.2] has joined #ubuntu === fabbione [n=fabbione@vpn-nat.fabbione.net] has joined #ubuntu === GaiaX11 [n=vagner@201.57.125.2] has joined #ubuntu === tito [n=tito@200-85-195-95.bk3-dsl.surnet.cl] has joined #ubuntu [06:15] LinAsH: prism2_pci 74752 0 to be specific [06:15] in cfdisk, how can i specify ext3 ? [06:15] guys how to play microshit's wmv3 files ? [06:15] How do I automatically mount cdrom's? /etc/fstab - auto/noauto ? === brush01uk [n=brush01u@62-30-75-207.cable.ubr03.brom.blueyonder.co.uk] has joined #ubuntu === OMF [n=OMF@130.80-203-114.nextgentel.com] has joined #ubuntu [06:15] Excuse me can some one help me with a problem with my UBUNTU ?? Apache 2 + Php 5 poblem with russian and latvian language charsets === capgadget [n=elifino@adsl-69-149-32-251.dsl.rcsntx.swbell.net] has joined #ubuntu === Gorxon [n=Gorxon13@062016238240.customer.alfanett.no] has left #ubuntu [] [06:16] when im doing modprobe will it be modprobe ? === foo [n=foo@unaffiliated/foo] has joined #ubuntu === GigaClon [n=gigaclon@n159s030.ntc.blacksburg.shentel.net] has joined #ubuntu [06:16] hey, I need to write a program in C that displays information about a process, such as process credentials, process address space, process states, things like that === aidanr [n=chatzill@193.120.73.238] has joined #ubuntu [06:16] ro1, when you do modprobe prism2_pci yes === joeyk_ [n=joeyk@hsdb.k12.ar.us] has joined #ubuntu [06:16] any ideas how to go about that? [06:16] ok just did it [06:16] LinAsH: cool [06:17] just did it [06:17] Someone could help me? How do I automatically mount cdrom's? /etc/fstab - auto/noauto ? [06:17] LinAsH: i guess that means there was success cuz there was no error === SanityInAnarchy [n=sanity@mailhost.thaddeus.com] has joined #ubuntu [06:17] Excuse me can some one help me with a problem with my UBUNTU ?? Apache 2 + Php 5 poblem with russian and latvian language charsets [06:17] LinAsH: but what do i do from here === robey [n=robey@dr122.internetdsl.tpnet.pl] has joined #ubuntu === mypapit [n=manbruta@124.82.41.33] has joined #ubuntu === seraphim [n=seraphim@e179135051.adsl.alicedsl.de] has joined #ubuntu === StikkitJim [n=James@cpc1-staf3-0-0-cust99.brhm.cable.ntl.com] has joined #ubuntu [06:18] ro1, if iwconfig doesn't list your card I don't really know :( [06:18] newbie q:) hey i'm having some trouble installing an app... when i try to install it, i get an error message that the command make is not found... [06:18] <[DOW] Shaddar> is the dhcp-server automatically installed and configured after installing ubuntu or have i to configure it manually ? [06:18] do i have to modify the script, or can i resolve this another way [06:18] OMF: apt-get install make [06:18] OMF: apt-get install build-essential [06:18] erm anyone knows how to play wmv3 files in ubuntu ? [06:19] OMF: or what Konnektion said [06:19] !wvm === njan [n=james@about/security/staff/njan] has joined #ubuntu [06:19] Sorry, I don't know anything about wvm - try searching on http://bots.ubuntulinux.nl/factoids.cgi [06:19] lol :) [06:19] er bleh [06:19] !wmv [06:19] For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats [06:19] there [06:19] heh === VisualStation is now known as Visual|Cuisine [06:19] why is rdesktop and tsclient both smearing my text... [06:19] http://jo3net.com/images/ugh.jpg === Admiral_Chicago [n=freddy@66.99.72.2] has joined #ubuntu [06:19] LinAsH: ok i will keep trying [06:19] just started after an update to 6.10 [06:20] LinAsH: thanks for the help === deflux- [n=tdondich@c-71-202-5-132.hsd1.ca.comcast.net] has joined #ubuntu [06:20] my apt-get and/or aptitude is crashing. Seems to happen after I install a package, but before the next reboot. Crashes cold, will not release the lock, system won't reboot -- sync hangs [06:20] ro1, good luck [06:20] wont edgy be shipped ? [06:20] this is after the Edgy upgrade, I'm guessing the new kernel [06:20] shriphani, no. === rand [n=ricardo@87.196.255.186] has joined #ubuntu [06:20] shriphani, they will continue to ship dapper. [06:21] quiet, when will "they" ship edgy ? === kodat [n=kodat@cpe-74-69-127-86.rochester.res.rr.com] has joined #ubuntu === ghandi [n=ghandi@p549E9BE2.dip0.t-ipconnect.de] has joined #ubuntu [06:21] shriphani, if you're talking about shipit.... they won't. [06:21] uh oh [06:21] anyone know how to edit hyperlinks in GAIM away messages..cuz i used html but i dont think it worked [06:21] anyone else seeing the same thing? Anything stupid I haven't thought of? It's NOT GOOD that I have to pull the plug (literally) on a server to get my apt back! [06:21] quiet, why so ? === LoneShadow [n=duh@c-67-188-235-220.hsd1.ca.comcast.net] has left #ubuntu [] [06:22] dapper is LTS [06:22] i think gaim (or trillian) one of the two uses a plugin to support HTML in profiles/away messages [06:22] might wanna look on their site [06:22] and edgy is not ? [06:22] https://wiki.ubuntu.com/UbuntuWeeklyNewsletter/Issue14#head-1e3555bea7bd06018bbadcf89ed23281e09d78f1 [06:22] shriphani, no. [06:22] whats another rdp client besides rdesktop and tsclient? [06:22] well i didnt see an LTS on breezy either [06:22] joeyk_ define rdp [06:22] remote desktop protocol [06:23] vnc? [06:23] shriphani, there's not... dapper was the first lts. [06:23] nah === Ayabara [n=anders@84.210.83.52] has left #ubuntu ["Leaving"] === BenC_ [i=bcollins@conference/ubuntuconf/x-721226d183830ddb] has joined #ubuntu [06:23] so only LTS will be shipped henceforth ? [06:23] windows to linux? [06:23] linux to windows [06:23] don't know, shriphani. === mrnotproper [n=mrnotpro@142-217-81-164.telebecinternet.net] has joined #ubuntu [06:23] vnc is the most cross-platform [06:23] vncviewer === Admiral_Chicago [n=freddy@66.99.72.2] has joined #ubuntu [06:23] thanks sanity in anachy: are there any more useful packages i should install? === Exposure [n=exposure@cc569857-a.ensch1.ov.home.nl] has joined #ubuntu [06:24] joeyk_ can i ask why VNC isnt a option? [06:24] OMF: other than build-essential? I don't know, check what it's asking for === hornyboy [n=chic@pD9ED56FC.dip.t-dialin.net] has joined #ubuntu [06:24] Excuse me can some one help me with a problem with my UBUNTU ?? Apache 2 + Php 5 poblem with russian and latvian language charsets [06:24] OMF: I assume you're trying to compile something from scratch, you'll probably have to install libxxx-dev if it says it can't find xxx === hornyboy [n=chic@pD9ED56FC.dip.t-dialin.net] has left #ubuntu [] [06:24] joeyk_: i think theres something called Vino for gnome === Studiosus [n=vic@88.201.134.26] has joined #ubuntu [06:25] quiet, have you any idea about playing wmv3 files in linux ? [06:25] Excuse me can some one help me with a problem with my UBUNTU ?? Apache 2 + Php 5 poblem with russian and latvian language charsets [06:25] one more q, what is the default directory for the kernel files in ubuntu 6.06? [06:25] i'll check it out [06:25] Fallen_Angel: do you have them installed system wide? === tim167 [n=tim@d51A46238.access.telenet.be] has left #ubuntu [] [06:26] is the problem only in apache or will the whole system not display those charecters [06:26] joeyk_: also look into FreeNX === Rondom [n=Rondom@p54AEDD14.dip.t-dialin.net] has joined #ubuntu [06:26] Konnektion === Psychobudgie [n=klaatu@82-71-44-108.dsl.in-addr.zen.co.uk] has joined #ubuntu === ChaKy [n=chaky@0-59.dsl.iskon.hr] has joined #ubuntu === ruda_ [n=ruda@trrdsv-aww.wrk.terra.com.br] has left #ubuntu ["Ex-Chat"] [06:27] shriphani, wiki.ubuntu.com/RestrictedFormats get the stuff you need installed and you should be able to view them with mplayer. === moose5435 [n=turkey@adsl-152-130-123.int.bellsouth.net] has joined #ubuntu === jonshea_ [n=jonshea@vpn-84-78.dartmouth.edu] has joined #ubuntu === Spec[x] is now known as Spec === collin [n=collin@24-119-166-210.cpe.cableone.net] has joined #ubuntu [06:27] quiet: isn't wmv3 supported? I thought it was wmv9 that needs the win32 codecs? === thansen [n=thansen@137.65.168.36] has joined #ubuntu [06:28] no clue. [06:28] i assume the gstreamer plugins can add that capability. [06:28] quiet: well I've installed automatix.. we'll see what happens. [06:28] Farm_Fresh, you will get no support here if something breaks. === Jonbo [n=Jonbo123@adsl-074-229-245-180.sip.bhm.bellsouth.net] has joined #ubuntu === paras [n=paras@deltabravo.wifi93.eiu.edu] has joined #ubuntu === test3422 [n=test@220-245-202-201-wa-pppoe.tpgi.com.au] has joined #ubuntu === [Jonne] [n=chatzill@114.86-64-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu === cbx33 [n=pete@ubuntu/member/cbx33] has joined #ubuntu [06:29] quiet: I figured that.. But this box is nothing more than a toy.. and a clean install only take a few minutes. === wanted [n=chatzill@124.104.16.143] has joined #ubuntu [06:30] okay.. well have fun than. [06:30] :) [06:30] what is the name of the next ubuntu release going to be? === ciaron [n=soth@cpc3-broo4-0-0-cust526.renf.cable.ntl.com] has joined #ubuntu [06:31] feisty [06:31] hi. my 6.06 desktop system FREEZES/HANGS everytime i insert a flashdrive in the USB slot. [tried using the flashdrive in other computers, but it works.] what could be wron with my ubuntu? [06:31] oh === wanted is now known as wanted1 === tisse [n=tisse@c-126-106-vas-l2.cust.mdfnet.se] has joined #ubuntu === edgarin [n=edgarin@216.230.150.7] has joined #ubuntu [06:32] hi people [06:32] wich is the best program ti use with dvb? sky star 2? [06:33] wanted1: it locks up before you can even mount it? === tisse [n=tisse@c-126-106-vas-l2.cust.mdfnet.se] has joined #ubuntu === erUSUL [n=erUSUL@248.Red-83-35-0.dynamicIP.rima-tde.net] has joined #ubuntu [06:33] Konnektion: yes. Whn I was still on 5.10, that didn't happen, not even 1x [06:34] your on edgy now? [06:34] oh 6.06 i see my bad === brandini [n=brandini@adsl-70-228-104-3.dsl.akrnoh.ameritech.net] has joined #ubuntu [06:34] what happens if you plug it in then boot the computer? [06:34] people anyone with dvb skystar 2 working fine? === sysdoc [n=sysdoc@pool-71-119-81-191.lsanca.dsl-w.verizon.net] has joined #ubuntu [06:35] Hello, is it fairly easy to make an nVidia raid setup work on install? === RaD|Tz [n=ubuntu61@189.168.33.74] has joined #ubuntu === Latty [n=Latty@host81-129-251-108.range81-129.btcentralplus.com] has joined #ubuntu [06:35] brandini: what level raid? [06:36] Konnektion: it's a raid 1 === Thuryn [n=thuryn@24.244.142.170] has joined #ubuntu [06:36] I realize it's only a bios raid... but you know :) === Gwaihir [n=Gwaihir@ppp-114-75.25-151.libero.it] has joined #ubuntu === green_earz [n=admin@213-232-83-67.dsl.prodigynet.co.uk] has joined #ubuntu [06:36] what version of ubuntu? [06:36] 6.10 [06:36] server [06:36] amd64 [06:36] :) === r0bby [i=wakawaka@cpe-24-164-167-171.hvc.res.rr.com] has joined #ubuntu [06:37] if im not mistake webmin has a raid configuation module [06:37] i dont know how to go about it any other way [06:37] Konnektion: I need to load a module on boot [06:37] i actually have a promise raid controller :) === poopotootti [n=poopotoo@c193-229-37-194.elisa-laajakaista.fi] has joined #ubuntu === njan [n=james@about/security/staff/njan] has left #ubuntu ["Leaving"] === Panaclerio [n=angelo@host175-67-dynamic.61-82-r.retail.telecomitalia.it] has joined #ubuntu [06:37] ok [06:38] brandini: this link might help [06:38] http://www.howtoforge.com/linux_software_raid [06:38] talks about software raid in 5.10.. but im sure it will atleast give you a idea [06:38] mainly I need to load a module to make the nvidia raid work :) [06:38] that much I know === Strykar [n=wakka@59.95.32.250] has left #ubuntu ["Leaving"] [06:39] !raid [06:39] Tips and tricks for RAID and LVM can be found on https://help.ubuntu.com/community/RaidConfigurationHowto and http://www.tldp.org/HOWTO/LVM-HOWTO === the_Cat [n=jgrund@h16n1fls32o294.telia.com] has joined #ubuntu === nolimitsoya [n=nolimits@176.139.216.81.static.vhe.siw.siwnet.net] has joined #ubuntu === scout [n=scout@0x535c02af.kjnxx6.adsl-dhcp.tele.dk] has joined #ubuntu === tich [n=bradley@bas3-montreal02-1096689873.dsl.bell.ca] has joined #ubuntu [06:40] hmm... why isn't webmin in the dapper repository ? === Sp4rKy [n=maxenced@ubuntu/member/sp4rky] has joined #ubuntu [06:40] please, how can i use mailx if y want use it in a script (with the mail worte in a file) === lgp [n=lgp@c-187f70d5.024-39-6b6c6d1.cust.bredbandsbolaget.se] has joined #ubuntu === Elpis [i=steffan@unaffiliated/cadet/bot/elpis] has joined #ubuntu === itodd [n=itodd@chargedsoftware.com] has joined #ubuntu [06:40] scout: do not know, disappeared in dapper (was aviable in breezy) [06:40] i think its in the backports.. but ive learned its better to compile it by yourself [06:40] what syntax must i use in the file for correct mail (Subject /message ) [06:41] darnit [06:41] i need it for proftpd configuration === digilux [n=digilux@catv-5665371e.catv.broadband.hu] has joined #ubuntu [06:41] I can't seem to get this ftp server to work! [06:41] where are metamorfozis? [06:41] :D [06:41] one more q, what is the default directory for the kernel files in ubuntu 6.06? [06:41] scout: what ftpd? === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu [06:41] /usr/src/uname-r i believe === lillpelle [n=mickep@c-96cbe253.311-17-64736c12.cust.bredbandsbolaget.se] has joined #ubuntu [06:41] oh proftpd [06:42] Konnektion, just any ftp server [06:42] OMF: you talking about kernel headers/source? === brandini [n=brandini@adsl-70-228-104-3.dsl.akrnoh.ameritech.net] has left #ubuntu ["thanks!"] [06:42] new gaim version is shit :) [06:42] webmin is easy to compile on ubuntu === finalbeta [n=finalbet@d5152A68A.access.telenet.be] has joined #ubuntu [06:42] hey philrod [06:42] Konnektion: what should i do re USB problem? === zenrox [n=zenrox@pool-71-115-219-183.spknwa.dsl-w.verizon.net] has joined #ubuntu [06:42] kopete rulz :D [06:42] !language [06:42] why not just get it.. didnt you say you were having problems with it in apt-get [06:42] Please watch your language and keep this channel family friendly. [06:42] LinAsh: still there [06:42] Konnektion: my system hangs each time i insert the flash disk [06:42] van itt magyar? [06:42] Konnektion, yeah i have it installed now.. just need the proftpd addon [06:43] !language hungarian [06:43] :D [06:43] LinAsH: I feel i am very close in fixing this === strabes_ [n=strabes@wcnat-50-253.wheaton.edu] has joined #ubuntu [06:43] Sorry, I don't know anything about language hungarian - try searching on http://bots.ubuntulinux.nl/factoids.cgi === haffe [n=haffe@ua-83-227-198-253.cust.bredbandsbolaget.se] has joined #ubuntu [06:43] wanted1: what happens when you plug it in before you boot into linux? === xDCDx [n=cooper@81-203-58-207.user.ono.com] has joined #ubuntu [06:43] Hello. I seem to have some troubles. === blueone [n=just@c66-235-8-142.sea2.cablespeed.com] has joined #ubuntu [06:43] scout: proftpd is default in webmin 1.300 (current) === xgm [n=xgm@84.15.67.76] has joined #ubuntu [06:43] LinAsH: I just need to know how to enable a hardware device, that cannot be hard === OllieD [n=VaDoR@client-82-2-83-196.manc.adsl.virgin.net] has joined #ubuntu [06:43] How to update from 6.06 to 6.10. I have 6.10 alternate install cd [06:43] Konnektion, yeah so i just have discovered :) [06:44] ;) [06:44] I am running Edgy on a machine with a Fortissimo IV. However, all-though sound works, the gnome-mixer does not work. [06:44] Is this a known bug? [06:44] <[DOW] Shaddar> is the WEP-key meant in "networking" at ubuntu with "network password" ? [06:44] i haven't been able to get my wireless, flash, or nvidia and i 've been thinking of reinstalling dapper. have others had similar probelms with edgy? should i try a reinstall of edgy first? [06:44] Konnektion: I tried both. The system doesn't boot when the disk is inserted when i turn on the system. When I wait after boot, the system hangs as soon as I insert the flashdisk. [06:44] How to update from 6.06 to 6.10. I have 6.10 alternate install cd?? === MarcN [n=marc@dslv-1-139.mv.com] has left #ubuntu [] === roler [n=chris@pool-71-109-251-62.lsanca.dsl-w.verizon.net] has joined #ubuntu [06:44] what to use to view an *swf file? [06:45] wanted1: then its deffinatly something in ubuntu.. you are running 6.06 right? [06:45] Hey Room can someone help me, how do i enable a hardware device that has been disabled [06:45] xgm, http://digg.com/linux_unix/How_to_Upgrade_Ubuntu_dapper_to_Edgy_Eft_Today_Released_With_screenshots [06:45] sundari: firefox. [06:45] i've been able to get flash, nvidia &wireless working ok on edgy [06:45] haffe: thanx [06:45] Is there a text editor that offers popup syntax helpers when you are typing? [06:45] Konnektion: yes, 6.06 === xst [n=xst@kbhn-vbrg-sr0-vl208-012.perspektivbredband.net] has joined #ubuntu [06:45] roler: you mean for programming? === Cranky-E17 [n=Elive_us@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu [06:46] ifireball, ; yes [06:46] Konnektion: i used 5.10 before and got no problems with it. should i use 6.10 instead? [06:46] ifireball, i tired... but no luck with firefox === `blink [i=blink@chello089078096245.chello.pl] has joined #ubuntu [06:46] roler: depends on the language, and desktop env you're using === der_daniel [n=daniel@pD9E1176A.dip0.t-ipconnect.de] has joined #ubuntu [06:46] wanted1: only think i can think of is maybe try to update to edgy.. maybe its a driver issue and now its fixed.. i know alot of my hardware had problems with 6.06.. and work in 6.10 [06:46] ifireball, ; just for php ... [06:46] xgm, gksu "update-manager -c" [06:46] sundari: do you have the flash plugin installed? [06:46] yes [06:46] jbroome: there is not any files in that directory not any in usr/src/ either [06:46] roler: you using gnome of kde? [06:46] xgm, oh yes sudo that [06:47] cd Program\Files? or ? [06:47] :D [06:47] :D [06:47] ifireball, gnome [06:47] Can anyone explain this: For a mount point I have specified "noauto" as mount option in /etc/fstab. But still it is mounted automatically upon boot. This behavior came with edgy. Why is it beeing auto-mounted? [06:47] OMF: have you downloaded the src? [06:47] HELP [06:47] :D [06:47] Konnektion: oic. too bad, i prefer 6.06 for its LTS :( === mypapit [n=manbruta@124.82.41.33] has joined #ubuntu [06:47] upgrade from dapper to edgy - no sound. i hear my mic, but can't play music or record... any idea what can cause this? === mumbles is now known as mumbles-off === Cromag^ [n=cth@lunix.dk] has joined #ubuntu [06:47] runge: afaik bluefish has what you need [06:47] cd program files .. not found.. ? program\files? or ? :D [06:47] roler: afaik bluefish has what you need [06:48] ty === typecast [n=user@p54A09D85.dip0.t-ipconnect.de] has joined #ubuntu === dont_panic [n=dontpani@212.11.57.187] has joined #ubuntu [06:48] thx.. [06:48] :[ === killalby [n=killalby@adsl-240-250.38-151.net24.it] has joined #ubuntu [06:48] thanks, downloading [06:48] sundari: I suppose normal flash files on sites work? === strabes__ [n=strabes@wcnat-50-253.wheaton.edu] has joined #ubuntu === strabes__ is now known as strabes [06:49] Anyone have a HOWTO on making a simple deb package from a tgz? [06:49] I also have a problem in Edgy where I can't do a traceroute. First of all I have no traceroute command, it's traceroute6... When I run it on any host or IP, it says "Unknown host xxxxxxxxxx" no matter what I type === Hese_ [n=heikki@addr-82-128-207-182.suomi.net] has joined #ubuntu [06:49] Wanderer, alien might be able to do it? [06:49] quiet: I'll look === visik7 [n=visi@unaffiliated/visik7] has joined #ubuntu === crashzor [n=crashzor@t-miog.demon.nl] has joined #ubuntu [06:50] ohh... never mind... i got it [06:50] thanksd [06:50] why is it to freakin hard to get a ftp server up and running ? [06:50] roler: looks like your dns is horked and you need to install the "traceroute" package [06:50] scout, it's not. [06:50] aptitude install proftpd === Skorgu|Work [n=patrick@pool-71-247-103-88.nycmny.east.verizon.net] has joined #ubuntu [06:51] jbroome: nope... where do i do that? [06:51] roler: seems traceroute isn't installed on edgy by default, traceroute6 is for ipv6 [06:51] arrgh [06:51] Anyone have L2tp/IPSec working under ubuntu? [06:51] quiet, well yes it is.... i've been trying to get this freaking proftpd to work for so long! === Hese_ [n=heikki@addr-82-128-207-182.suomi.net] has joined #ubuntu [06:51] man proftpd? [06:51] i swear i typed apt-get install traceroute the other day and it wasn't avail, now it is. thanks :) [06:51] st_ [06:51] oops [06:51] <[DOW] Shaddar> are there any networking-windows in ubuntu to see the reachable wireless-lan-networks ? [06:51] anyone using Rhythmbox with DAAP ? === nahkiss [i=nahkiss@dsl-hkigw7-fed8dc00-135.dhcp.inet.fi] has joined #ubuntu === crashzor [n=crashzor@t-miog.demon.nl] has joined #ubuntu [06:52] [DOW] Shaddar, if you use networkmanager... otherwise... just open a terminal and iwlist wlan0 scan === f4bien [n=fabien@host9-122.pool8250.interbusiness.it] has joined #ubuntu [06:52] umm guys, it's really urgent... what could cause sound on ubuntu to disappear like this after upgrade? [06:52] isnt make menuconfig supposed to work in /usr/src/linux-generic something ? can i just download the regular kernel and install? [06:52] quiet, i just get frustrated that it has to be so hard... why can't i just define a list of users using a gui or something [06:52] ? [06:52] lol [06:52] sounds like you miss windows? [06:53] !tell OMF about kernel source [06:53] !tell tisse about kernel source [06:53] quiet, no not at all,,, i've been using linux for about five years now... [06:53] scout, did you ever think to do something like.... idunno.... google for "proftpd setup" or something similar? === sire1 [n=sirex@217.117.18.129] has joined #ubuntu [06:53] scout: because proftpd is ment for HUGE servers, its probably way more complicated then what you need [06:53] <[DOW] Shaddar> quiet, where can i find the networkmanager ? i can only find "networking" and "network tools" in amdinistration [06:53] strange, should this iptables command not work? [06:53] iptables -t nat -A PREROUTING -p tcp -i eth0 -d 208.68.18.68 --dport 80 -j DNAT --to-destination 10.169.1.3:80 === Hese_ [n=heikki@addr-82-128-207-182.suomi.net] has joined #ubuntu [06:53] [DOW] Shaddar, you'd have to install it. [06:53] and you'll probably want build-essential while you're at it [06:53] time for lunch. [06:53] ifireball, yes exactly :) i just can't find anything more suitable ... [06:54] i installed kernel sources but make menuconfig keeps failing [06:54] scout: vsftpd? [06:54] ifireball, i'll check it out.... thnx [06:54] scout: just search for "ftp" on synaptic, plenty of servers there === zspada15 [n=kvirc@pool-71-116-23-204.eriepa.dsl-w.verizon.net] has joined #ubuntu === sparr [n=kvirc@71.16.203.242] has joined #ubuntu [06:55] ifireball, yeah i know... everyone just keeps on saying proftpd [06:55] now i'm gonna try vsftpd [06:55] <[DOW] Shaddar> hm ^^ i've installed ubuntu 6.10 from live-cd (dont' know if it's installed automatically) ... can i add programms/packages from live-cd which where not installed automatically ? === f4bien [n=fabien@host9-122.pool8250.interbusiness.it] has left #ubuntu ["Sto] [06:56] scout: anycase, ftp is a bad choice for many things, probably the single most unsecure file tansfer protocol there is [06:56] What is the status of bug #58721? It has been marked with high importance but there doesn't seem to be any progress. In the meanwhile, all Matrox users are left extremely with bad gfx performance. :-( [06:56] i'm try to setup a XMDCP server only i want my client pc stil run games so i can i run a LOCAL (x)application on a local X server connect to a XDMCP server thnx for any advice [06:56] [DOW] Shaddar, I'm not sure I understand what you mean. === Ayabara [n=anders@84.210.83.52] has joined #ubuntu [06:56] [DOW] Shaddar, You installed from the Live-CD, now you rebooted without the CD, and now you want to install additional programs? [06:56] <[DOW] Shaddar> i'm searching the networkmanager quiet meantioned === ZeeEyes [n=ZeeEyes@unaffiliated/zeeeyes] has joined #ubuntu [06:56] anyone using mplayer? in edgy my movies seem to wide no matter what aspect ratio I choose. [06:56] haffe: use synaptic [06:57] or better add/remove [06:57] I'm still running Dapper and I've been hearing about a lot of issues upgrading to Edgy, should I hold out until the dust settles or should I just push through before too many updates get stacked on top of the release version? [06:57] eerr [DOW] Shaddar [06:57] <[DOW] Shaddar> cause i can't find anything to connect to my wlan-network here at home [06:57] ifireball, one of my friends is going to FXP something to me === Lurkan [n=agsm@189.142.106.4] has joined #ubuntu === xopher [n=xopher@unaffiliated/xopher] has joined #ubuntu [06:57] <[DOW] Shaddar> or to search reachable wlan-networks [06:57] [DOW] Shaddar: are you familiar with command line? [06:57] why wont make menuconfig work in the kernel source!?!? [06:57] <[DOW] Shaddar> not really ^^ [06:57] scout: I see. === marcels [n=marcel@mstoop.xs4all.nl] has joined #ubuntu [06:58] [DOW] Shaddar: i assume you are in gnome, run applications-acessories-terminal === nickspoon [n=nick@84.13.18.152] has joined #ubuntu [06:58] i'm try to setup a XMDCP server only i want my client pc stil run games so i can i run a LOCAL (x)application on a local X server connect to a XDMCP server thnx for any advice ?? [06:58] <[DOW] Shaddar> k [06:58] <[DOW] Shaddar> done :) [06:58] [DOW] Shaddar: now is your wifi card in a pci or pcmcia? === GaiaX11 [n=vagner@201.57.125.2] has joined #ubuntu [06:59] tisse: what does it show when you run make menuconfig does it say make not found? === LGKeiz [i=LGKeiz@ppp-70-225-176-161.dsl.chmpil.ameritech.net] has joined #ubuntu [06:59] <[DOW] Shaddar> ahm ... i guess it's pci (onboard at my laptop) === bronson [n=bronson@66.160.177.229] has joined #ubuntu === RetLaw [n=RetLaw@082-146-105-101.dyn.adsl.xs4all.be] has joined #ubuntu === ZeeEyes [n=ZeeEyes@unaffiliated/zeeeyes] has joined #ubuntu [06:59] [DOW] Shaddar: type "lspci" and look for something resemblind your wifi card in the output === dudanogueira [n=duda@unaffiliated/bitdoidao/x-000001] has joined #ubuntu [06:59] okigt [06:59] crashzor: login to XDMCP with Xnest? otherwise just ron app from the central server over SSH (read about the -x option for ssh) [06:59] Hi. My fstab is noauto for cdrm's but when i put them in drivers they sill mount. Why? [06:59] !lspci | [DOW] Shaddar [06:59] Sorry, I don't know anything about lspci - try searching on http://bots.ubuntulinux.nl/factoids.cgi [07:00] <[DOW] Shaddar> k, my wlan-adapter is listed there [07:00] GaiaX11: noauto is for boot it doesn't try to auto mount them on boot makes the boot faster === typecast [n=user@p54A09D85.dip0.t-ipconnect.de] has left #ubuntu ["ERC] [07:00] [DOW] Shaddar: paste just the wifi line into the chat [07:00] When I try to restart my machine from X it changes to an 85Hz video mode that my monitor doesnt support and then just sits there (I have not checked if I can ssh in yet). If I 'sudo reboot' from a console then I get the graphical kubuntu logo+progress bar for shutdown/startup and all is well. Help? [07:00] GaiaX11: becasue the gnome volume manager doesn't use fstab === vilde [i=qcsc6fhu@193.75.76.66] has joined #ubuntu [07:01] tisse: are you there? [07:01] sparr: are you on kubuntu? [07:01] zspada15: yes === Volstrup [n=volstrup@0x5552fb8d.adsl.cybercity.dk] has joined #ubuntu [07:01] ifireball: i need to have fast rendering i log in on the xdmcp server @ boot ( after same klinking around in my login screen that is ) and the apps needs to be runned on THIS machine the xmdcp client so i need to run a app like you woud normally do ;) === Hese_ [n=heikki@addr-82-128-207-182.suomi.net] has joined #ubuntu [07:01] sparr: go to #kubuntu [07:01] ifireball: So. Which is the volume manager for gnome? [07:01] <[DOW] Shaddar> zspada15: 04:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) === raphink [n=raphink@ubuntu/member/raphink] has joined #ubuntu [07:02] zspada15: yes [07:02] crashzor: but you want most of the desktop on the server? [07:02] Thx kitche for telling me. [07:02] kitche: yes i sent you an query [07:02] [DOW] Shaddar: wpa or wep? [07:02] <[DOW] Shaddar> wep [07:02] kitche: i have make it stops at certain errors === frajagon [n=frajagon@dinip129.univalle.edu.co] has joined #ubuntu [07:02] ripts/kconfig/lxdialog/checklist.c:288: error: KEY_RIGHT undeclared (first use in this function) [07:02] make[2] : *** [scripts/kconfig/lxdialog/checklist.o] Fel 1 [07:02] ok just a sec [07:02] tisse: you are probably not registered which you need to be to pm me [07:02] like those [07:02] i see [07:02] wait then === tisse is now known as soppman === Lorvija [n=lorvija@adsl-215-238-227.kymp.net] has joined #ubuntu [07:03] now === [sYn] [n=syn@host-84-9-194-109.bulldogdsl.com] has joined #ubuntu === MattJ [n=matthew@88-111-149-78.dynamic.dsl.as9105.com] has joined #ubuntu === User29 [i=JUser@adsl-69-227-123-192.dsl.scrm01.pacbell.net] has joined #ubuntu === IA-Outdoors [n=chatzill@www.iowaoutdoors.org] has joined #ubuntu === WikinG [n=wiking@81.198.229.203] has joined #ubuntu === gorilla [n=gpatters@ppp234-3.static.internode.on.net] has left #ubuntu ["Leaving"] [07:03] ifireball: alle of it accept for the games ;) its only for me so i don't care if i need to boot them up out of a console ;) [07:03] <[DOW] Shaddar> zspada15 : wep [07:04] is there a GUI for browsing remote filesystems via SSH? === cherubiel [n=cherubie@unaffiliated/cherubiel] has joined #ubuntu === The_Machine [n=awatson@65.91.185.36] has joined #ubuntu [07:04] crashzor: you can change the application icons on your desktop so the ssh to your local machine and invoke the apps [07:04] [DOW] Shaddar: is this a centrino laptop? === Farm_Fresh [n=daryl@c-68-85-72-195.hsd1.fl.comcast.net] has left #ubuntu [] [07:04] when i try to launch beryl it shows that message: "beryl: No composite extension" what it means??? [07:04] <[DOW] Shaddar> zspada15: yes [07:04] is there a repo for opera on edgy? [07:04] IA-Outdoors: nautilus === Hom3Boys [n=Home@81.196.174.67] has joined #ubuntu [07:04] dsa [07:04] konquerer too? [07:04] Hi! mates! [07:04] [DOW] Shaddar: are you registered in freenode? [07:04] IA-Outdoors: afaik yes with fish:// === Merijn [i=blah@204pc232.sshunet.nl] has joined #ubuntu [07:05] fish? [07:05] someplace I can learn more/ [07:05] ? [07:05] <[DOW] Shaddar> zspada15: nope [07:05] WikinG: you need to enable compositie in your xorg.conf [07:05] kitche, how to do that??? [07:05] [DOW] Shaddar: type "/msg nickserv register [password] [email] " into the irc window, make sure theres a slash [07:06] Why does ~/Examples belong to root? === raphink [n=raphink@ubuntu/member/raphink] has joined #ubuntu [07:06] ifireball: reply from my app is Xlib: connection to ":0.0" refused by server [07:06] Xlib: No protocol specified [07:06] !register | [DOW] Shaddar [07:06] [DOW] Shaddar: Information about registering your Freenode nick is at http://freenode.net/faq.shtml#contents-userregistration [07:06] IA-Outdoors: you just write fish://servername/directory in the address bar, maybe there is something about that in the wiki, I donno === alex_dinamo [n=Unknown@189.157.114.233] has joined #ubuntu [07:06] crashzor: what are you trying to do? [07:06] !tell boink about xubuntu === dra_ [n=dra@nimbus.wh-hms.uni-ulm.de] has joined #ubuntu [07:06] cherubiel: i'm try to setup a XMDCP server only i want my client pc stil run games so i can i run a LOCAL (x)application on a local X server connect to a XDMCP server thnx for any advice [07:06] Hi there... has anyone tried xgl/beryl on ubuntu? [07:07] crashzor: xhost + [07:07] iptables -t nat -A PREROUTING -p tcp -i eth0 -d 208.68.18.68 --dport 80 -j DNAT --to-destination 10.169.1.3:80 [07:07] strange, should this iptables command not work? [07:07] crashzor: then try again [07:07] !xubuntu | boink [07:07] boink: Xubuntu is Ubuntu with XFCE, for more info, see http://www.xubuntu.org To install from Ubuntu: sudo apt-get install xubuntu-desktop === fool|Zzz is now known as foolswisdom [07:07] cherubiel: locally or remotely ? === Toaster56 [n=srcds@p508123A6.dip0.t-ipconnect.de] has joined #ubuntu [07:07] crashzor: remotely [07:07] [DOW] Shaddar: any luck? [07:07] crashzor: run xhost+ on the loacl machine [07:07] crashzor: xhost + [07:07] how can i check if i have dma enabled ? [07:08] cherubiel: no need to be that permissive [07:08] ifireball, works like a charm. Question, is there a way to have those show up like a mounted drive? === FidO-DidO [n=cedricmc@87.217.57.249] has joined #ubuntu [07:08] <[DOW] Shaddar> zspada15: no ... (19:12:47) -NickServ- Syntax: REGISTER <-- what password if i'm not registred yet ? oO [07:08] ...so I don't have to type them in all the time? === Tjoels [n=troels@0x50a1043b.virnxx9.adsl-dhcp.tele.dk] has joined #ubuntu [07:08] crashzor: thats xhost + (put the + in the wrong place in my last line) [07:08] [DOW] Shaddar: make a password === syl [n=damn@85.236.161.66] has joined #ubuntu [07:09] crashzor: ifireball is right, only give the client that is connecting to the remote machine. === syl [n=damn@85.236.161.66] has left #ubuntu ["Konversation] [07:09] cherubiel: how do i enable a hardware device that has been disabled ? [07:09] <[DOW] Shaddar> i typed "/msg nickserv register " and then this error-msg came [07:09] ifireball: and cherubiel if feel stopid not find dat 1 out but thnx :) [07:09] <[DOW] Shaddar> @ zspada15 [07:09] just do /msg nickserv register no quotes [07:09] ro1: what hardware? [07:09] IA-Outdoors: I suppose you can make favorits out of them === ChaKy [n=chaky@0-59.dsl.iskon.hr] has joined #ubuntu [07:10] ifireball: I guess that'll do [07:10] cherubiel: * -network:0 Disabled [07:10] cherubiel: its for my wireless card [07:10] soppman: aptitude install hdparm aptitude show hdparm === infernaljesus [n=infernal@63.136.113.213] has joined #ubuntu [07:10] <[DOW] Shaddar> k [07:10] now === marltu [n=MaR@webmaster.skycommunity.lt] has joined #ubuntu [07:11] did you do it? [07:11] how to setup vpn? === dnite [n=dnite@c-67-186-115-112.hsd1.il.comcast.net] has joined #ubuntu [07:11] <[DOW] Shaddar> zspada15: yes, and worked (i guess ^^) === rauble [n=andrew@pool-71-254-252-161.hrbgpa.dsl-w.verizon.net] has joined #ubuntu [07:11] green_earz: i have hdparm but then what?:) hdparm -d wont tell since ubuntu thinks my sata disk is a scsi disk thanks to a stupid raid controll [07:11] how to get C header files that matches my kernel? === Metal_Militia [n=ioppo@host-84-222-34-212.cust-adsl.tiscali.it] has joined #ubuntu [07:11] how do I connect to a WPA-TKIP wireless network? [07:11] kitche: how to enable compositie in xorg.conf ??? [07:12] I have installed gnome- network manager and wpa supplicant [07:12] but I still don't see an option for WPA [07:12] I'm wondering.. how do I add something to fstab?? I tried to add my usb drive to fstab, but when i reboot, i get an fsck error and it drops to a maintanance shell ... is there a different place for this in ubuntu? so i can get my usb disks to mount where I want them instead of where gnome/ubuntu feels like they should mount to? [07:12] infernaljesus: gnome-network-manager didn't do anything useful for me until I rebooted and unplugged from the wired lan connection === [niceday] _ [n=daniel@87.100.54.88] has joined #ubuntu [07:12] dnite: type sudo mount into the terminal [07:13] right.. stupid question, but does anyone know how you change version of ubuntu you're using on the ubuntu forums? [07:13] osfameron, so I reboot and unplug myself and it will work? [07:13] zspada15, ok? [07:13] soppman: http://linuxgazette.net/issue79/punk.html http://www.linuxdevcenter.com/pub/a/linux/2000/06/29/hdparm.htmlhttp://www.gentoo-wiki.com/HOWTO_Use_hdparm_to_improve_IDE_device_performance#Getting_information_about_your_different_drives [07:13] osmaferon, well... it's worth a shot... === shinmen [n=alvaro@200.122.148.115] has joined #ubuntu [07:13] CarinArr: prolly in my control panel or something of the like [07:13] dnite: I suppose a better idea would be to hack the config file to the gnome volume manager, pluggeble stuff like useb drives don't belong in the fstab [07:13] pwd [07:14] ignore me i found it [07:14] WikinG: ther is couple of ways to do it think dpkg-reconfigure will ask you a question about it === JoshH [i=josh@josh.xmission.com] has left #ubuntu [] [07:14] after going over it like three times [07:14] <- blind === Latty [n=Latty@host81-157-57-151.range81-157.btcentralplus.com] has joined #ubuntu [07:14] ro1: is your PnP OS option disabled in the BIOS? === jingiz [n=min@cpe-071-077-130-075.nc.res.rr.com] has joined #ubuntu === shinmen [n=alvaro@200.122.148.115] has left #ubuntu ["Ex-Chat"] [07:15] cherubiel: would i check that by cardctl ident ? If not how [07:16] soppman: hdparm only reads ide devices not sata devices [07:16] ifireball, that's strange.. why is that? i put it in there as noauto and i really just want to be able to control where it gets mounted w/o having to explicitly call the whole mount statement.. i've never had that problem in any other distro... === kainer [n=kai@p508BEC41.dip.t-dialin.net] has joined #ubuntu === kainer [n=kai@p508BEC41.dip.t-dialin.net] has left #ubuntu ["Verlassend"] === TsN|Hunter [n=hluisi@dsl092-012-080.sfo1.dsl.speakeasy.net] has joined #ubuntu === Qixx [n=qix@dsl-241-228-96.telkomadsl.co.za] has joined #ubuntu === [sYn] [n=syn@host-84-9-194-109.bulldogdsl.com] has joined #ubuntu === [sYn] _ [n=syn@host-84-9-194-109.bulldogdsl.com] has joined #ubuntu === dont_panic [n=dontpani@212.11.57.187] has left #ubuntu ["Quitte"] [07:18] ok, what's the quick fix to the, IMHO, messed up default behavior of VIM? [07:18] fun [07:18] IA-Outdoors, what's the messed up default behavior of vim? [07:18] I guess I could just copy a vimrc from anotehr box === any [n=any@any.areality.info] has joined #ubuntu [07:18] ro1: not sure, you might want to restart your networking.. ifdown and ifup [07:18] dnite: I think the errors you're seeing might have to do with the new init system, in anycase changin the fstab will probably not effect where gnome mounts it [07:18] Hi [07:18] dnite: well you should just be able to do mount /dev/ but usb stuff in ubuntu gets added to /media automatically === rebelfallen [n=brad@wsip-64-58-188-68.oc.oc.cox.net] has joined #ubuntu [07:19] hi; i got a really weird problem which is getting increasingly irritating [07:19] been trying to solve it for months; eventually gave up - till i got it working; then broke it again === sparr [n=kvirc@71.16.203.242] has joined #ubuntu === infernaljesus [n=infernal@63.136.113.213] has joined #ubuntu [07:19] ifireball, ok.. thanks.. [07:19] basically; i got a 17" laptop; which runs at a widescreen resolution [07:19] and an external 17" screen (not widescreen) [07:19] i want to run the external screen *only* at 1280x1024 + OpenGL, but yeah --- it refuses :( === thomas_ [n=thomas@p549214FA.dip0.t-ipconnect.de] has joined #ubuntu [07:19] it wants the 1280x800 resolution that the laptop runs at; or 1024x768 [07:19] i got it to run at 1280x1024 with a *very* nasty xorg.conf (uses xinerama) -- but then no opengl [07:19] [oh yeah; and HP NX7400 / Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) [07:19] dnite: appending doesn't allow me to backspace paste the spot I hit append...arrow-down sometimes adds a line with "D" on it [07:19] etc [07:19] it's almost like it's straigh vi instead of vim [07:19] [and i got it working by using fedora; their display tool fixed it -- but i couldnt get it to work a second time :( [07:19] infernaljesus: any joy? === [sYn] [n=syn@host-84-9-194-109.bulldogdsl.com] has left #ubuntu ["Leaving"] === j_ack [n=rudi@p508D87DC.dip0.t-ipconnect.de] has joined #ubuntu [07:20] osfameron, unfortunately not :( === fabbione [n=fabbione@vpn-nat.fabbione.net] has joined #ubuntu === [sYn] _ is now known as [sYn] [07:20] question. I want to load ubuntu onto a usb flash drive. one of those tiny memory sticks you know. Anyway, if I do that - can I boot from it? I want to have a mobile OS - that's my goal. So I can bring my files with me anywhere. I run windows at work, ubuntu at home [07:20] infernaljesus: there should be a little icon in the taskbar which has a "just do what I mean" action on clicking on it === scythe128 [n=scythe@208-46-123-50.dia.static.qwest.net] has joined #ubuntu === angel_of_shadow [n=denver@84.4.74.34] has joined #ubuntu [07:20] hey all you happy people [07:20] How can I get the list of the names of the faces for xterm (fixed is the only one recognized) ? [07:20] infernaljesus: I got quite bad tempered about it while I still had a wired connection. The moment I removed that, it decided to actually do something useful. === Sonic|Laptop [n=garrett@unaffiliated/sonicvanajr] has joined #ubuntu [07:20] c'est moche xchat simple :x === BenC_ [i=bcollins@conference/ubuntuconf/x-03bab0fa80af2a3a] has joined #ubuntu === angel_of_shadow [n=denver@84.4.74.34] has left #ubuntu ["salut] [07:20] IA-Outdoors, ah.. i'm not sure.. i only use vim for ruby on rails coding.. and the ruby vim package and rails.vim plugin seems to clear up any of the 'issues' with vim's default actions.. [07:20] in fact that is it [07:21] dnite: vi is not a symlink to vim like in other distros [07:21] osfameron, I see the conenction icon (if that's what you're talking about) and I click it and I can choose wired or wireless. But when I choose wireless I can only type WEP keys, not WPA [07:21] *connection [07:21] infernaljesus: I'm getting the impression that ubuntu laptop networking might be working (as in, as well as XP if not Mac) by Feisty or whatever the next version is called... [07:21] rebelfallen: it can be done but I don't think it'll be very easy [07:21] infernaljesus: for me it correctly identified that my dad's connection was protected by WPA and Did The Right Thing [07:21] ifireball: I don't doubt it would be a pain in the arse but I think it can be done [07:22] how do i install a .deb file i have downloaded? === BenC_ is now known as BenC [07:22] infernaljesus: whereas at home it just got me onto my (unprotected, yeah yeah, I suck) network without asking me any questions [07:22] soppman: dpkg -i .deb [07:22] I know bios doesn't let you boot from USB so I am unsure where to start there is prob #1 [07:22] soppman: dpkg -i debfile.deb === Versed` [n=Versed@c-69-253-173-154.hsd1.nj.comcast.net] has left #ubuntu ["Leaving"] [07:22] osfameron, I installed wpa_supplicant, but all it has in the /etc/wpa_supplicant/ is ifupdown.sh === j0nas` [n=ubuntu@fctnnbsc16w-156034208180.nb.aliant.net] has joined #ubuntu [07:22] osfameron, shouldn't there be a .conf? === shingalated [n=admin@ipn36373-f07666.cidr.lightship.net] has joined #ubuntu [07:22] infernaljesus: yeah, me too. I couldn't make head nor tail of it [07:22] rebelfallen: there is probably some king of a linux boot loader for usb like syslinux for CDs and grub for HDs you need to learn about that first [07:23] infernaljesus: are you on Edgy? I think wpa_supplicant was preinstalled, so perhaps you're not === e319 [n=Na@cpe-74-64-54-125.nyc.res.rr.com] has joined #ubuntu [07:23] anybody got the ipw3945 working? === roryy [n=user@tedo-ip-nas-1-p487.telkom-ipnet.co.za] has joined #ubuntu [07:23] i desperately need help making it work [07:23] osfameron, yes, UI'm on edgy [07:23] woohoo 49 minutes of batter, 37 minutes left of work :) [07:23] j0nas`: in edgy? [07:23] yes === thaytan [n=jan@core.fluendo.com] has left #ubuntu ["Uh] === Acetylene [n=Acetylen@212.2.173.106] has joined #ubuntu [07:23] infernaljesus: oh well. Like I said... maybe it'll be functional in Feisty... *maybe* === archangelpetro [n=petroleu@82.152.97.172] has joined #ubuntu [07:23] should be supported out of the box. if you run 'iwconfig', do you see a wireless interface? [07:23] i just installed edgy... wireless does not work [07:23] . [07:23] !doesntwork [07:23] Sorry, I don't know anything about doesntwork - try searching on http://bots.ubuntulinux.nl/factoids.cgi [07:23] i can see my network with iwlist scanning [07:24] rebelfallen: you'll probably also need to compile your own kernel to enable it to mount root fs from usb [07:24] but i cant get a dhcp reply [07:24] ah, so it /does/ work, you just can't get connected [07:24] yeah I figured , I found a boot loader needs me to compile my kernel [07:24] scanning works [07:24] thats it [07:24] most common cause of a lack of dhcp reply is that you're not associated to the AP [07:24] is the ubuntu cd a live cd or just install cd? [07:24] AP? [07:24] run iwconfig again and see if the AP (access point's) MAC address shows up [07:24] e319 both === ctime [n=hellople@unaffiliated/ctime] has joined #ubuntu === Mavez-San [n=ryoko@neilmathers.co.uk] has joined #ubuntu === archangelpetro [n=petroleu@82.152.97.172] has joined #ubuntu [07:25] sec === Walm [n=blaa@walm.xs4all.nl] has joined #ubuntu [07:25] rebelfallen: you're pretty much porting ubuntu to USB.. publish your work when you're done... :P [07:25] boink? === Amaranth [i=travis@conference/ubuntuconf/x-f405ff1e7b89cab3] has joined #ubuntu [07:25] lupine_85: yes i see the mac [07:25] j0nas: if it doesn't (e.g. it says 'Access-point: then run sudo iwconfig ap === any [n=any@any.areality.info] has left #ubuntu ["*plop*"] [07:25] ah, ok === Vardis [n=Vardis@87.110.138.213] has joined #ubuntu [07:26] scythe128: so if i boot up, then i will boot right into the live cd, with the option to install from the main screen? [07:26] can you assign a static IP? [07:26] ifireball: I'll keep a journal and post it somewhere when I am done. I don't think this has been written about if not even done before [07:26] who whould want an abuse button in their irc program?? wth?? kick, ban, op, notice, dcc, I can use those, but abuse? [07:26] also, does ubuntu give you the ability to reburn a livecd with the changes you have made to your install? [07:26] sorry, had to rant [07:26] no :( === Wei_Li [i=WinNT@d205-250-110-197.bchsia.telus.net] has joined #ubuntu === XoR [n=XoR@85.254.200.164] has joined #ubuntu [07:26] Petite question sans aucun rapport avec Ubuntu [07:26] networking worked fine out of the box with breezy === cherubiel [n=cherubie@unaffiliated/cherubiel] has joined #ubuntu === lxuser [n=lxuser@80.80.154.232] has joined #ubuntu [07:27] also with edgy beta [07:27] yes... wonder what's gone wrong [07:27] is ipw3945d running ? [07:27] rebelfallen: the guys that made damn small linux might have a guide up somewhere [07:27] i had an older kernel... 2.6 .... 15? === Blacken [n=ed@edward-ropple.um.maine.edu] has joined #ubuntu [07:27] osfameron, do you know of any other wifi managers? [07:27] so does anyone know if i can save changes to my ubntu install and then burn a new cd? === TheGateKeeper [n=gatekeep@82-36-112-78.cable.ubr03.king.blueyonder.co.uk] has joined #ubuntu [07:27] infernaljesus: wifi-radar === miguel [n=miguel@201-14-142-126.fnsce701.e.brasiltelecom.net.br] has joined #ubuntu === pip [n=root@h31n11c1o1019.bredband.skanova.com] has joined #ubuntu [07:27] i couldnt make ipw3945 driver when i tried to build from source [07:27] e319: tar up /etc and /home and there's your settings - mostly [07:27] hi, the cd i burnt for installing ubuntu on my computer keeps having problems so I'd like to know if you can just install ubuntu using the internet the source instead [07:27] im running livecd now... [07:27] infernaljesus: for the purists, iwlist/iwconfig [07:27] j0nas`: you shouldn't need to build it from source [07:28] brb im going to boot from hd [07:28] j0nas`: that driver works out of the box, [07:28] but I /know/ it works from the hd [07:28] j0nas`: its included with ubunut === Elive_user57 [n=Elive_us@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu [07:28] Can anyone tell me how to manually add the repository keys (the Release.gpg key files) I am unable to download the keys the normal way, because port 8080 is being used by the router [07:28] is it in restricted modules? [07:28] cherubiel: it's 'working', but not receiving/sending network traffic [07:28] how to get C header files that matches my kernel? [07:28] cherubiel, how would I use iwlist ? [07:28] you might need linux-restricted-modules installing, yes [07:28] Hello i have problem with tomcat5, when i start it, it shutdown itself right away === ctime [n=hellople@unaffiliated/ctime] has left #ubuntu ["Leaving"] [07:28] k brb === j0nas` [n=ubuntu@fctnnbsc16w-156034208180.nb.aliant.net] has left #ubuntu [] [07:29] infernaljesus: on a term, iwlist scan === mikefoo [n=mikefoo@166.84.140.254] has joined #ubuntu === pegger [n=adminisz@82-131-154-155.pool.invitel.hu] has joined #ubuntu [07:29] so ubuntu boots right into the live cd? it wont overwrite anything unless i ask it to correct? === shinmen [n=alvaro@200.122.148.115] has joined #ubuntu [07:29] cherubiel, yes, I have scanned it. But can I connect over it? :p === pip [n=pip@h31n11c1o1019.bredband.skanova.com] has joined #ubuntu [07:29] yeah [07:29] infernaljesus: iwconfig does the dirty job, iwlist lists details === The_Machine_ [n=awatson@65.91.185.36] has joined #ubuntu === fluxi_ [n=fluxi@99.155-64-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu === parpate [n=parpate@p54BEAEEB.dip0.t-ipconnect.de] has joined #ubuntu === miguel [n=miguel@201-14-142-126.fnsce701.e.brasiltelecom.net.br] has joined #ubuntu === Dragonfire4 [n=Dragonfi@adsl-225-104-172.mia.bellsouth.net] has joined #ubuntu === shinmen [n=alvaro@200.122.148.115] has left #ubuntu ["Ex-Chat"] [07:29] hi, the cd i burnt for installing ubuntu on my computer keeps having problems so I'd like to know if you can just install ubuntu using the internet the source instead [07:29] infernaljesus: man iwconfig [07:29] e319 correct [07:29] sry i closed down my window so i didnt see if anyone posted a sources.list to me :) [07:29] test [07:30] wei_li not that I am aware of [07:30] 965 in the channel, wow [07:30] 964 :p [07:30] ok [07:30] 963 :P === ukgam3r [n=ukgam3r@host86-139-1-108.range86-139.btcentralplus.com] has joined #ubuntu [07:30] ltr off to try ubuntu === e319 [n=Na@cpe-74-64-54-125.nyc.res.rr.com] has left #ubuntu [] === johnyyyysadsdas [n=johny@pD9E2E458.dip.t-dialin.net] has joined #ubuntu [07:30] 964 === lupine_85 is still right === ttrygve [n=trelvik@campuseai.expedient.com] has joined #ubuntu [07:30] Can anyone tell me how to manually add the repository keys (the Release.gpg key files) I am unable to download the keys the normal way, because port 8080 is being used by the router === Hawk|- [n=Hawk@p549C9CFE.dip0.t-ipconnect.de] has joined #ubuntu [07:31] hi [07:31] anyone got HDA Intel driver working OK in dapper? === johnyyyysadsdas [n=johny@pD9E2E458.dip.t-dialin.net] has left #ubuntu [] === Alakazamz0r [n=Alakazam@198.170.183.130] has joined #ubuntu [07:31] hda? [07:31] this shits hopeless === Tampler [n=falafel@83.142.21.168] has joined #ubuntu === Dragonfire4 is now known as Dragonfire1 === Comrade_S [n=Krush_U@pool-151-203-201-34.bos.east.verizon.net] has joined #ubuntu [07:31] http://damnsmalllinux.org/cgi-bin/forums/ikonboard.cgi?;act=ST;f=17;t=15467 [07:31] i even reinstalled on a new system... [07:31] This is how to make a USB boot pen [07:31] maybe i should install dapper === anamartinez [n=anamarti@83.230.233.62] has joined #ubuntu [07:31] I'm going to play with that === miguel [n=miguel@201-14-142-126.fnsce701.e.brasiltelecom.net.br] has joined #ubuntu [07:32] scythe128: high definition audio, on PCI-E chipsets === ekimus [n=mmarcher@v017.demo.tuwien.ac.at] has joined #ubuntu [07:32] alakazamaz0r, dapper has been troubleshot more... might be more stable too === m1stFu [n=jordan@24-158-13-145.dhcp.mdsn.wi.charter.com] has joined #ubuntu [07:32] !help [07:32] I am ubotu, all-knowing infobot. You can browse my brain at http://bots.ubuntulinux.nl - Usage info: http://wiki.ubuntu.com/UbuntuBots === MetaMorfoziS [n=sajt@dsl54009EFA.pool.t-online.hu] has joined #ubuntu === anamartinez [n=anamarti@83.230.233.62] has left #ubuntu ["Abandonando"] [07:33] yeah scythe128 === Bitmaster [n=Bitmaste@c-fd63e253.325-1-64736c12.cust.bredbandsbolaget.se] has joined #ubuntu [07:34] hellllppp [07:34] shingalated, yelling helllllppp isnt goint to fix your situation, asking an intelligble question will though [07:34] im stuck in the terminal in Configuring flashplugin-nonfree screen it gives a user aggreement and an ok option but pressing it does nothing help plz === j0nas` [n=tim@fctnnbsc16w-156034208180.nb.aliant.net] has joined #ubuntu === relachs [n=dddddd@ACB53007.ipt.aol.com] has joined #ubuntu [07:35] I'm trying to setup a server for my teacher, but I can't get the repository keys because port 8080 is blocked by the router === chuckyp [n=chuckyp@adsl-75-36-112-138.dsl.bcvloh.sbcglobal.net] has joined #ubuntu [07:35] k i am running... ipw3945 is loaded, ipw3945d running [07:35] then your gonna need to use a dif port or create a routing rule [07:35] still cannot get a dhcp reply from my router [07:35] can i somehow add the release.gpg files so apt will see them? [07:35] darn, http://ubuntuforums.org/showthread.php?t=244624, anyone worked on this one? [07:36] if you can ftp them, you should be able to dkpkg them === Bombadil [n=none@mnhm-590c0387.pool.einsundeins.de] has joined #ubuntu [07:36] j0nas`: router ping-able? [07:36] when i do apt-get update it says Could not connect to 192.168:8080 (192.0.0.168), connection timed out [07:36] j0nas`: ping 192.168.0.1 ? [07:36] i cant ping my router if i dont have an ip... === klerfayt [n=klerfayt@85.196.210.154] has joined #ubuntu === slinky_ [n=twh@hst-dhcp-142-166-156-179.cable.crrstv.net] has joined #ubuntu === nomis_ [n=nomis__@chello062178225065.14.15.vie.surfer.at] has joined #ubuntu [07:36] j0nas`,no [07:37] how do i have the gpg keys but how do I add them so apt will see them? === vega- [i=mikko@lotus.puolikuu.net] has joined #ubuntu === psusi [i=hidden-u@iriserv.iradimed.com] has joined #ubuntu [07:37] j0nas`, you ned an ip on the same network i.e. 192.168.1.XXX or whatever [07:37] !patience [07:37] The people in this channel are volunteers. Your attitude will determine how fast you are helped. See also http://wiki.ubuntu.com/IrcGuidelines === izmaelis [n=izmaelis@88.119.1.126] has joined #ubuntu [07:37] cherubiel, I installedw wifi-radar, but when I click on my network and then want to edit it it isn't doing anything :/ [07:37] i dont know if you can change the port of apt-get, but you can create a routing table or rule on the router/firewall to allow port 8080 [07:37] shingalated: apt-key add === Pensacola [n=pensacol@196.116-242-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [07:37] i cant get a dhcp reply from my router for some reason === titusfeuer [n=thomas@h081217012201.dyn.cm.kabsi.at] has joined #ubuntu [07:37] j0nas`, are you sure the router is set up for dhcp? [07:38] cherubiel, I installed wifi-radar, but when I click on my network and then want to edit it it isn't doing anything :/ [07:38] infernaljesus: it would show some info on the bottom of the wifi-radar window, what does it sat? [07:38] you can manually enter that info j0nas [07:38] chuckyp: certain [07:38] shingalated, theres usually a command under the repo [07:38] i have dynamic ip on my wired device which i am using right now [07:38] does anyone know how to get that menu to hit OK for me? [07:38] scythe, the router is using port 8080 for remote management and can not be disabled === floppyears [n=floppy@poipu/supporter/floppyears] has left #ubuntu [] [07:38] scythe128, did you try searching the forums? [07:38] lupine_85: are you running on ipw3945? [07:38] I am using the Totem Movie Player and the Rhythmbox Music Player with the gstreamer0.10 plugins. I would like to know if there is a graphical equalizer that I can use with this setup? [07:38] connected to None ip(192.168.100.14) but that's because I'm over my wired connection [07:38] shingalated: maybe your proxy variable is set? unset http_proxy === uni_power [n=i3dmaste@c-67-173-242-25.hsd1.co.comcast.net] has joined #ubuntu [07:39] when I disabled my wired and tried with wifi === threete [n=irc@80-41-219-99.dynamic.dsl.as9105.com] has joined #ubuntu [07:39] unset HTTP_PROXY [07:39] which gcc version is used for kernel compiles in ubuntu 6.06 and ubuntu 6.10? is there an easy way to find out? [07:39] it just told me none ip (127.0.0.1) so I wasn't connected anywhere === miguel [n=miguel@201-14-142-126.fnsce701.e.brasiltelecom.net.br] has joined #ubuntu [07:39] infernaljesus: what does iwlist show ya? ssid ? === [niceday] _ [n=daniel@87.100.54.88] has joined #ubuntu === mostafa_as3ad [n=mostafa@82.201.236.68] has joined #ubuntu [07:39] j0nas`: no [07:39] cherubiel, iwlist shows all the information === phas [n=phas@81-208-106-68.ip.fastwebnet.it] has joined #ubuntu [07:39] hmm; how to limit sunaptics touchpad rate to 40 in ubuntu edgy? [07:39] can you think of why it might not work? [07:40] cherubiel, tried that but I am still getting the same thing: 'Could not connect to 192.168:8080 (192.0.0.168), connection timed out' === clash [n=clash@213-202-155-147.bas503.dsl.esat.net] has joined #ubuntu [07:40] infernaljesus: you should have the same ssid set in the network manager [07:40] shin, there a proxy on your network? === aschimedes [n=aschi@127.55.203.62.cust.bluewin.ch] has joined #ubuntu === phas [n=phas@81-208-106-68.ip.fastwebnet.it] has left #ubuntu ["Ex-Chat"] === Exposure [n=exposure@cc569857-a.ensch1.ov.home.nl] has joined #ubuntu [07:40] cherubiel, it is... === LeeJunFan [n=junfan@adsl-69-210-207-5.dsl.klmzmi.ameritech.net] has joined #ubuntu [07:40] cherubiel, it is autodetected [07:40] infernaljesus: kde/gnome ? [07:40] gnome === POVaddct [n=chris@www.linux-info-tag.de] has joined #ubuntu [07:41] scythe, yes there is a proxy i am at school, and i am trying to set up a server for my teacher === hangfire [n=hangfire@200.95.149.220.cableonline.com.mx] has joined #ubuntu === LjL [n=ljl@81-208-36-87.ip.fastwebnet.it] has joined #ubuntu === miguel_ubuntu [n=miguel@201-14-142-126.fnsce701.e.brasiltelecom.net.br] has joined #ubuntu === i3d [n=i3dmaste@c-67-174-108-144.hsd1.co.comcast.net] has joined #ubuntu [07:42] my ubuntu 6.10 freezes at the first slider screen on my desktop pc. anybody got any pointers on what I could do? Cd checksum is ok. === mlowe [n=mlowe@c-24-6-84-179.hsd1.ca.comcast.net] has joined #ubuntu [07:42] you can set synaptic up to use the proxy. The proxy should have port forwarding enabled [07:42] <[sYn] > Dumb Question: I stupidly told amarok to hide its menu bar, anyone know the keyboard command to get the damn thing back? === tuopppi [n=tuomas@bb-81-175-154-133.dsl.phnet.fi] has joined #ubuntu === P3L|C4N0 [n=gcamposm@200.121.86.9] has joined #ubuntu [07:42] [sYn] : Ctl+H or Ctl+M, one of those two === rag [n=rag@58.Red-80-24-33.staticIP.rima-tde.net] has joined #ubuntu [07:43] <[sYn] > JosefK, Thanks :) Ctrl + M === chireo [n=sifoo@60.52.8.5] has joined #ubuntu [07:43] huuh [07:43] can anyone recommend a graphical equalizer ? [07:43] does anyone know of a livecd that is simply a (preferably knoppix/kanotix or other debian based with similar hwdetection) base system, where packages like xorg, wm and programs are added manualy? i dont feel like stripping >10000 packages in a chroot from vanilla kanotix... [07:44] cherubiel, ? [07:44] is there a way to specify which port to sue with apt from cli? === gnu2it2 [n=kgrimm@cpe-024-211-170-229.nc.res.rr.com] has joined #ubuntu [07:44] scythe, my teacher said that i am not behind the proxy, the only reason I can not use port 8080 is that it is being used by the router for remote management. [07:44] nolimit, what do you mean by base system, with or without x [07:44] anyone experience with mailman ? [07:44] !info mailman [07:44] mailman: Powerful, web-based mailing list manager. In component main, is optional. Version 1:2.1.8-2ubuntu2 (edgy), package size 7824 kB, installed size 36552 kB === sgorilla71 is now known as sgorilla80 [07:44] aa === mnepton [i=mneptok@conference/ubuntuconf/x-eb48978593e076f8] has joined #ubuntu [07:45] shin, try moving behind the proxy and then usinging its port forwarding... that might let you around the 8080 issue [07:45] Ubuntu 6.10 install freezes at the first progress bar on my desktop pc. Anybody got any pointers on what I could do? Cd checksum is ok. [07:45] scythe128, doesnt matter, though its no problem if its without. just aslong as its small, and doesnt take a lot of work to strip down to choose a custom wm === fowlduck [n=nate@205.213.122.141] has joined #ubuntu [07:45] What application do you folks use to play music? === tacopon77 [n=tacopon7@softbank218128109115.bbtec.net] has joined #ubuntu [07:46] xmms === lxuser [n=lxuser@80.80.154.232] has joined #ubuntu === esion [n=esion@ron34-1-82-224-148-91.fbx.proxad.net] has joined #ubuntu [07:46] uhhh.... ubuntu, knoppix, damn small linux, puppy linux, there are a ton out there [07:46] I believe ubuntu actually has a program to let you roll your own live cd [07:46] pupply linux is less than 40 meg === maverick`- [n=mave_fne@HSI-KBW-082-212-056-251.hsi.kabelbw.de] has joined #ubuntu === rebelfallen [n=brad@wsip-64-58-188-68.oc.oc.cox.net] has left #ubuntu [] [07:47] psusi: do i need to remove the gstrreamer0.10 plugins before i install xmms? === rkd [n=rday@80-47-89-212.lond-hex.dynamic.dial.as9105.com] has joined #ubuntu === alef0 [n=alef0@M2737P029.adsl.highway.telekom.at] has joined #ubuntu [07:47] scythe128, the ubuntu disc is tons of work to strip (been there, done that) dsl lacks apt (or did last time i tried) and puppy lacks packages [07:47] slinky_: why would you? [07:47] the guy that was asking about proxies, do this.. === Skorgu|Work [n=patrick@pool-71-247-103-88.nycmny.east.verizon.net] has left #ubuntu [] [07:47] Check out slax (http://www.slax.org/). === helfrez [i=helfrez@nat/ibm/x-eca43aa39fd168ac] has joined #ubuntu === Enoxs [n=Enoxs@d51A51A12.access.telenet.be] has joined #ubuntu === i3d [n=i3dmaste@c-67-174-108-144.hsd1.co.comcast.net] has left #ubuntu [] [07:47] echo Acquire::http::Proxy "http://proxy:8080"; | sudo tee /etc/apt/apt.conf.d/proxy === frozenflame [n=frozenfl@adsl-18-61-121.mco.bellsouth.net] has joined #ubuntu === Turk [n=Emir@88.226.128.215] has joined #ubuntu [07:47] psusi: I am new, I rebuilt this system 5 times because of distorted sound, so i ask :) [07:48] uhhh... gnoppix? your after a debian based system? [07:48] echo Acquire::http::Proxy \"http://proxy:8080\"; | sudo tee /etc/apt/apt.conf.d/proxy [07:48] nolimitsoya: you could manually install a minimal ubuntu system === atteh [n=atteh@a81-197-28-252.elisa-laajakaista.fi] has joined #ubuntu [07:48] hey guys, what is the service manager called in ubuntu? === dgquintas [n=dgquinta@25.72.78.83.cust.bluewin.ch] has joined #ubuntu [07:48] rather, and replacy the http://proxy/ part with the qualified address to your proxy [07:48] i installed the server version of ubuntu and I want o be able to manage display mamanager [07:48] boot from the livecd, format the disk, mount it, debootstrap it, and install only the packages you want === uni_power [n=i3dmaste@c-67-173-242-25.hsd1.co.comcast.net] has left #ubuntu [] === atteh [n=atteh@a81-197-28-252.elisa-laajakaista.fi] has left #ubuntu ["Leaving"] [07:49] psusi: that's a bit of work? you can install a command line system from the alternate CD, then add packages after [07:49] psusi, that done, though i cant find a good way of turning it into a workng live system [07:49] *thats [07:49] update manager says it cant get an exclusive lock, but in system monitor neiher aptitude, synaptic, a terminal or anything else can be found, help!! [07:49] nolimitsoya: install the minimal metapackage I think it was [07:49] rc-1: ps -ef | grep dpkg ? [07:49] le tme see... === i3d [n=i3dmaste@c-67-174-108-144.hsd1.co.comcast.net] has joined #ubuntu [07:49] <[DOW] Shaddar> zspada15: plz take a look at qry :) [07:49] psusi, live=bootable cd [07:49] rc-1 you running as root? === drakko [n=drakko@81-202-133-200.user.ono.com] has joined #ubuntu === [1] wenko [n=wenko@142.232.8.200] has joined #ubuntu [07:50] psusi: I didn't know if they would conflict, I don't know what is causing mt sound distortion [07:50] nope === b0ss_ [n=b0ss@ool-18b8d1ca.dyn.optonline.net] has joined #ubuntu [07:50] JosefK, did that command, what am i looking for [07:50] anyone know how to connect to a WPA-TKIP enabled AP from ubuntu 6.10 [07:50] root 29952 29913 0 13:30 ? 00:00:00 /usr/bin/dpkg --status-fd 23 --unpack [07:50] rc-1: any output, other than lines containing 'grep' [07:50] you need to be running update manager as root (kdesu, gtksu, sudo) and then you will be able to lock the directory === slinky_ mt = my, oops sorry [07:50] rc-1: there's the problem then [07:50] ah ok thanks [07:50] HI, i need help on how to get wine [07:51] rc-1: if you're sure it's hung, not just processing in the background, go ahead and kill it [07:51] how do i solve it? === esion [n=esion@ron34-1-82-224-148-91.fbx.proxad.net] has joined #ubuntu [07:51] could anyone help me out [07:51] scythe128, debian or other apt system is preferred. [07:51] scyth, is there a way to change the port being used by apt? === mby [i=mby@gandalf.ds5.agh.edu.pl] has left #ubuntu [] [07:51] rc-1: first try a friendly kill, 'sudo kill 29952' [07:51] rc-1: then wait a second, and see if it's still there using that 'ps -ef | grep dpkg' again [07:51] shin, nothing about it in the man page [07:51] HI, i need help on how to get wine is there a sudo apt command for wine? [07:51] psusi: thank you, I'lll give it a try [07:51] rc-1: if it doesn't die, it's probably hung, so do 'sudo kill -9 29952' === Cholito [n=alejandr@87.218.66.37] has joined #ubuntu === Thunderpants [i=thunder@spc1-bagu3-0-0-cust237.bagu.broadband.ntl.com] has joined #ubuntu [07:52] if anyone knows how to turn an installed ubuntu system into a bootable live cd that would be equally helpfull :) my attempts have all turned out pearshaped [07:52] hey everyone. I've installed Edgy on a pavilion laptop (turion 64 X2,nvidia 430 chipset, bcm 4311 wlan....). I've extracted firmware from a windows driver with fwcutter. There is a problem. I've got a message, something like can't find IRQ0 for device bcm43xx. Have somebody had the same problem? [07:52] solimitsoya there is an apt for rpm, you might wanna look at it because it would open up some other distros [07:52] nolimitsoya: chroot into the target after debootstrap and apt-get install ubuntu-minimal === rebelfallen [n=brad@wsip-64-58-188-68.oc.oc.cox.net] has joined #ubuntu [07:52] can somebody tell me which kernel I should install for a core 2 duo system, please? === bieb_work [n=me@adsl-074-228-195-207.sip.asm.bellsouth.net] has joined #ubuntu [07:52] Thunderpants: are you running Edgy or Dapper, and on i386 or amd64? === slinky_ [n=twh@hst-dhcp-142-166-156-179.cable.crrstv.net] has left #ubuntu [] === kitche [n=dragon@pool-70-16-39-100.buff.east.verizon.net] has joined #ubuntu [07:52] edge i386 [07:52] wow there were like 8 of those thanks :) === more [n=more@61.186.109.74] has joined #ubuntu [07:53] Thunderpants: stick with the default, linux-generic [07:53] Thunderpants: the -generic is fine [07:53] core 2 duo is intel, its only a 32 bit isnt it? [07:53] k thx [07:53] psusi, im sorry, but i dont see how that is going to help me... say i mount, extract and chroot the live cd image, how is installing ubuntu-minimal going to give me a smaller system? [07:53] no scythe128 [07:53] scythe128: no, it's AMD64 === miguel [n=miguel@200.121.246.199] has joined #ubuntu [07:53] EM64T/AMD64 [07:53] scythe128: depends some of them are EM64T compatiable [07:53] doh, im getting behind on my chips [07:53] nolimitsoya: wait, are you trying to make a livecd or are you trying to get a very small installation base on the hard disk? [07:54] just like some of the pentium 4 are EM64T [07:54] really?? when did the p4 go 64? [07:54] mnepton, will the generic kernel utilise both processor cores? [07:55] scythe128, the idea was to make a live system thats <256mb, with good hwdetection and openoffice :) ive done it on a hdd with ubuntu, but no luck with getting the damn thing live :) [07:55] HI, i need help on how to get wine is there a sudo apt command for wine? [07:55] psusi, a live cd :) [07:55] nolimitsoya: see https://help.ubuntu.com/community/LiveCDCustomization/6%2e06 [07:55] !wine B0ss_ [07:55] wine: Microsoft Windows Compatibility Layer (Binary Emulator and Library). In component universe, is optional. Version 0.9.22-0ubuntu3 (edgy), package size 9001 kB, installed size 42452 kB === Adnarim [n=goldstei@p54A5120B.dip0.t-ipconnect.de] has joined #ubuntu === j0nas1 [n=tim@fctnnbsc16w-156034220196.nb.aliant.net] has joined #ubuntu [07:55] dsl will have that on a cd... but why would you need apt after that if its a live cd? [07:55] psusi, thats what ive been trying, but things go pearshaped... [07:55] hi === JuJuBee [n=JuJuBee@greenville.k12.ny.us] has left #ubuntu ["Kopete] [07:55] where do i get it [07:55] has anybody had any luck with intel ipw3945 wireless device? [07:55] kitche [07:55] could you be more specific? [07:55] it does not seem to work out of the box with edgy [07:55] b0ss_: from universe === esion [n=esion@ron34-1-82-224-148-91.fbx.proxad.net] has joined #ubuntu [07:56] Can someone explain why ubuntu doesn't write to my USB player right away? Only when I want to undock it it writes, great way to waste time? [07:56] does someone know how to install module-assistant? sudo apt-get install module-assitant sais he cant find that package [07:56] b0ss_: but there is winehq official repos as well [07:56] but I need to install it for my graphixdriver [07:56] o [07:56] ok ill refer to it thanks === pitti [i=pitti@ubuntu/member/pitti] has joined #ubuntu [07:57] scythe128, dsl wont do openoffice and xfce, and since itll have to be <256mb i wont be albe to have every program on disc. if i can span to a usb drive and apt the packages i need from the repos, that fix it === rauble [n=andrew@pool-71-254-252-161.hrbgpa.dsl-w.verizon.net] has joined #ubuntu [07:57] casper helps me do that with great eaze, why ubuntu/debian is just great :) === Thunderpants [i=thunder@spc1-bagu3-0-0-cust237.bagu.broadband.ntl.com] has left #ubuntu ["Leaving"] === L1 [n=john@netblock-208-127-45-95.dslextreme.com] has joined #ubuntu === meuserj [n=meuserj@indianalifesciences.com] has joined #ubuntu [07:57] *ease [07:57] slinky_: check to see if you have the right driver install for the sound card > http://kmuto.jp/debian/hcl/ [07:57] Is PCI-express supported by the kernel in edgy? I think that's the problem with my laptop. === axel [n=axel@p5480D4BB.dip.t-dialin.net] has joined #ubuntu [07:57] ahh, I dont know of a <256 distro that does that . === shingalated [n=admin@ipn36373-f07666.cidr.lightship.net] has left #ubuntu [] [07:58] well, gotta go, my batter is at 23 minutes and I have to go to work (the other one) [07:58] best of luck nolimit === j0nas1 [n=tim@fctnnbsc16w-156034220196.nb.aliant.net] has left #ubuntu [] === B-Minus_ [n=sdfdsfds@eu85-10-105-27.adsl.euphonynet.be] has joined #ubuntu === AstralJava [n=jaska@cm-083-102-068-117.lohjanpuhelin.fi] has joined #ubuntu [07:58] I am running windows and it has partitioned the entire drive out. is there a windows tool that will let me set some disk aside in a new partition so I can install a dual boot system? === neil__ [n=neil@cpc1-bigg1-0-0-cust731.lutn.cable.ntl.com] has left #ubuntu ["Leaving"] [07:59] con partition magic [07:59] rebelfallen: partition magic [07:59] commercial sw [07:59] How to mount floppy disk? # mount /dev/fd0 /mnt/floppy -t vfat returns "device not found" [07:59] psusi, stripping down the obvious packages from the live cd still turns out to be to big, and hunting and findigt all the thousands of tiny packages that make up all that extra weight is several days of work. changing the system in the squashfs file to the one ive got working on a virtual hdd fails to boot :) [07:59] damn, was hoping for something free [07:59] the only reason i have linux is because i wanted tot ry it out and it screwed up windows [07:59] rebelfallen: if you install ubuntu, it will automatically ( with your permission ) shrink the windows partition to make room for itself === ezsquirt [n=bowser@vol21-1-82-224-19-51.fbx.proxad.net] has joined #ubuntu [08:00] psuse: really? thats rad [08:00] L1: sudo mount -t vfat /dev/fd0 /mnt/floppy [08:00] -e+i [08:00] and partition magic sucks.. it likes to eat disks for lunch... use gparted on the livecd to manually move around partitions [08:00] word gparted from livecd [08:00] psusi: thank you. livecd it is [08:00] nolimitsoya: ahhhhh you really want to pare down the livecd? I see [08:00] noone an idea how to install module-assistant? === techwhore [n=lumberja@dt1corp.globo.com] has joined #ubuntu [08:01] nolimitsoya: then it sounds like you need to build your own livecd from scratch, rather than modify the existing one [08:01] nolimitsoya: check out slax, it's modular === techwhore [n=lumberja@dt1corp.globo.com] has left #ubuntu [] [08:01] nolimitsoya: very very easy to customize [08:01] mnepton, /dev/fd0 is not defined [08:01] nolimitsoya: there's even a gui to add/remove packages iirc === techwhore [n=lumberja@dt1corp.globo.com] has joined #ubuntu === techwhore [n=lumberja@dt1corp.globo.com] has left #ubuntu [] === JPohlmann [n=jannis@e176140209.adsl.alicedsl.de] has joined #ubuntu [08:01] "There are currently 730254 people and 666 teams registered in Launchpad." [08:01] mnepton, /dev/fd is a directory with 4 files === fabbione [n=fabbione@vpn-nat.fabbione.net] has joined #ubuntu [08:03] mnepton, 0, 1, 2, 3 === Lattyware [n=Latty@host86-133-32-165.range86-133.btcentralplus.com] has joined #ubuntu === rebelfallen [n=brad@wsip-64-58-188-68.oc.oc.cox.net] has left #ubuntu [] === brynk [n=gerrit@garrut.xs4all.nl] has joined #ubuntu === sean_ [n=sean@cpe-069-132-052-158.carolina.res.rr.com] has joined #ubuntu === whitynz [n=Whity@60-234-132-74.bitstream.orcon.net.nz] has joined #ubuntu === esaym [n=esaym@cpe-24-162-149-45.hot.res.rr.com] has joined #ubuntu === fraco [n=fraco@213.219.186.143.adsl.dyn.edpnet.net] has joined #ubuntu === _arthurb [n=arthurb@cpe-69-200-90-126.nyc.res.rr.com] has joined #ubuntu === Arcad3 [n=arcad3@81.196.174.67] has joined #ubuntu === huXfluX [n=nknwd@devnull.kappa.ro] has joined #ubuntu === pitti [i=pitti@ubuntu/member/pitti] has joined #ubuntu === jkimball4 [n=jerrid@wsip-70-165-105-40.om.om.cox.net] has joined #ubuntu === sharperguy [n=sharp@88-109-37-236.dynamic.dsl.as9105.com] has joined #ubuntu === bimberi [n=dave@ubuntu/member/pdpc.active.bimberi] has joined #ubuntu === The_Machine [n=awatson@65.91.185.36] has joined #ubuntu === _justin420 [n=Justin@69.92.132.245] has joined #ubuntu === linlin [i=will@71.194.70.13] has joined #ubuntu === ezsquirt [n=bowser@vol21-1-82-224-19-51.fbx.proxad.net] has joined #ubuntu === AstralJava [n=jaska@cm-083-102-068-117.lohjanpuhelin.fi] has joined #ubuntu === B-Minus_ [n=sdfdsfds@eu85-10-105-27.adsl.euphonynet.be] has joined #ubuntu === meuserj [n=meuserj@indianalifesciences.com] has joined #ubuntu === rauble [n=andrew@pool-71-254-252-161.hrbgpa.dsl-w.verizon.net] has joined #ubuntu === esion [n=esion@ron34-1-82-224-148-91.fbx.proxad.net] has joined #ubuntu === Adnarim [n=goldstei@p54A5120B.dip0.t-ipconnect.de] has joined #ubuntu === miguel [n=miguel@200.121.246.199] has joined #ubuntu === kitche [n=dragon@pool-70-16-39-100.buff.east.verizon.net] has joined #ubuntu === Cholito [n=alejandr@87.218.66.37] has joined #ubuntu === [1] wenko [n=wenko@142.232.8.200] has joined #ubuntu === i3d [n=i3dmaste@unaffiliated/i3dmaster] has joined #ubuntu === Turk [n=Emir@unaffiliated/Turk] has joined #ubuntu === Enoxs [n=Enoxs@d51A51A12.access.telenet.be] has joined #ubuntu === helfrez [i=helfrez@nat/ibm/x-eca43aa39fd168ac] has joined #ubuntu === alef0 [n=alef0@M2737P029.adsl.highway.telekom.at] has joined #ubuntu === rkd [n=rday@80-47-89-212.lond-hex.dynamic.dial.as9105.com] has joined #ubuntu === maverick`- [n=mave_fne@HSI-KBW-082-212-056-251.hsi.kabelbw.de] has joined #ubuntu === tacopon77 [n=tacopon7@softbank218128109115.bbtec.net] has joined #ubuntu === fowlduck [n=nate@205.213.122.141] has joined #ubuntu === P3L|C4N0 [n=gcamposm@200.121.86.9] has joined #ubuntu === tuopppi [n=tuomas@bb-81-175-154-133.dsl.phnet.fi] has joined #ubuntu === mlowe [n=mlowe@c-24-6-84-179.hsd1.ca.comcast.net] has joined #ubuntu === LjL [n=ljl@81-208-36-87.ip.fastwebnet.it] has joined #ubuntu === POVaddct [n=chris@www.linux-info-tag.de] has joined #ubuntu === Exposure [n=exposure@cc569857-a.ensch1.ov.home.nl] has joined #ubuntu === aschimedes [n=aschi@127.55.203.62.cust.bluewin.ch] has joined #ubuntu === clash [n=clash@213-202-155-147.bas503.dsl.esat.net] has joined #ubuntu === mostafa_as3ad [n=mostafa@82.201.236.68] has joined #ubuntu === [niceday] _ [n=daniel@87.100.54.88] has joined #ubuntu === threete [n=irc@80-41-219-99.dynamic.dsl.as9105.com] has joined #ubuntu === Pensacola [n=pensacol@196.116-242-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu === psusi [i=hidden-u@iriserv.iradimed.com] has joined #ubuntu === vega- [i=mikko@lotus.puolikuu.net] has joined #ubuntu === nomis_ [n=nomis__@chello062178225065.14.15.vie.surfer.at] has joined #ubuntu === Bombadil [n=none@mnhm-590c0387.pool.einsundeins.de] has joined #ubuntu === chuckyp [n=chuckyp@adsl-75-36-112-138.dsl.bcvloh.sbcglobal.net] has joined #ubuntu === relachs [n=dddddd@ACB53007.ipt.aol.com] has joined #ubuntu === Bitmaster [n=Bitmaste@c-fd63e253.325-1-64736c12.cust.bredbandsbolaget.se] has joined #ubuntu === MetaMorfoziS [n=sajt@dsl54009EFA.pool.t-online.hu] has joined #ubuntu === m1stFu [n=jordan@24-158-13-145.dhcp.mdsn.wi.charter.com] has joined #ubuntu === ekimus [n=mmarcher@v017.demo.tuwien.ac.at] has joined #ubuntu === Comrade_S [n=Krush_U@pool-151-203-201-34.bos.east.verizon.net] has joined #ubuntu === Alakazamz0r [n=Alakazam@198.170.183.130] has joined #ubuntu === Hawk|- [n=Hawk@p549C9CFE.dip0.t-ipconnect.de] has joined #ubuntu === ttrygve [n=trelvik@campuseai.expedient.com] has joined #ubuntu === fluxi_ [n=fluxi@99.155-64-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu === pegger [n=adminisz@82-131-154-155.pool.invitel.hu] has joined #ubuntu === mikefoo [n=mikefoo@166.84.140.254] has joined #ubuntu === Blacken [n=ed@edward-ropple.um.maine.edu] has joined #ubuntu === XoR [n=XoR@85.254.200.164] has joined #ubuntu === Wei_Li [i=WinNT@d205-250-110-197.bchsia.telus.net] has joined #ubuntu === Vardis [n=Vardis@87.110.138.213] has joined #ubuntu === Amaranth [i=travis@conference/ubuntuconf/x-f405ff1e7b89cab3] has joined #ubuntu === Walm [n=blaa@walm.xs4all.nl] has joined #ubuntu === roryy [n=user@tedo-ip-nas-1-p487.telkom-ipnet.co.za] has joined #ubuntu === BenC [i=bcollins@debian/developer/bcollins] has joined #ubuntu === sparr [n=kvirc@pdpc/supporter/active/sparr] has joined #ubuntu === TsN|Hunter [n=hluisi@dsl092-012-080.sfo1.dsl.speakeasy.net] has joined #ubuntu === Metal_Militia [n=ioppo@host-84-222-34-212.cust-adsl.tiscali.it] has joined #ubuntu === dnite [n=dnite@c-67-186-115-112.hsd1.il.comcast.net] has joined #ubuntu === marltu [n=MaR@webmaster.skycommunity.lt] has joined #ubuntu === ChaKy [n=chaky@0-59.dsl.iskon.hr] has joined #ubuntu === Tjoels [n=troels@0x50a1043b.virnxx9.adsl-dhcp.tele.dk] has joined #ubuntu === dra_ [n=dra@nimbus.wh-hms.uni-ulm.de] has joined #ubuntu === raphink [n=raphink@ubuntu/member/raphink] has joined #ubuntu === Merijn [i=blah@204pc232.sshunet.nl] has joined #ubuntu === WikinG [n=wiking@81.198.229.203] has joined #ubuntu === User29 [i=JUser@adsl-69-227-123-192.dsl.scrm01.pacbell.net] has joined #ubuntu === MattJ [n=matthew@88-111-149-78.dynamic.dsl.as9105.com] has joined #ubuntu === Lorvija [n=lorvija@adsl-215-238-227.kymp.net] has joined #ubuntu === Volstrup [n=volstrup@0x5552fb8d.adsl.cybercity.dk] has joined #ubuntu === vilde [i=qcsc6fhu@193.75.76.66] has joined #ubuntu === ZeeEyes [n=ZeeEyes@unaffiliated/zeeeyes] has joined #ubuntu === RetLaw [n=RetLaw@082-146-105-101.dyn.adsl.xs4all.be] has joined #ubuntu === bronson [n=bronson@66.160.177.229] has joined #ubuntu === LGKeiz [i=LGKeiz@ppp-70-225-176-161.dsl.chmpil.ameritech.net] has joined #ubuntu === GaiaX11 [n=vagner@201.57.125.2] has joined #ubuntu === nickspoon [n=nick@84.13.18.152] has joined #ubuntu === xopher [n=xopher@unaffiliated/xopher] has joined #ubuntu === Ayabara [n=anders@84.210.83.52] has joined #ubuntu === zspada15 [n=kvirc@unaffiliated/zspada15] has joined #ubuntu === sire1 [n=sirex@217.117.18.129] has joined #ubuntu === nahkiss [i=nahkiss@dsl-hkigw7-fed8dc00-135.dhcp.inet.fi] has joined #ubuntu === strabes [n=strabes@wcnat-50-253.wheaton.edu] has joined #ubuntu === mypapit [n=manbruta@124.82.41.33] has joined #ubuntu === Cranky-E17 [n=Elive_us@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu === xst [n=xst@kbhn-vbrg-sr0-vl208-012.perspektivbredband.net] has joined #ubuntu === blueone [n=just@c66-235-8-142.sea2.cablespeed.com] has joined #ubuntu === xDCDx [n=cooper@81-203-58-207.user.ono.com] has joined #ubuntu === haffe [n=haffe@ua-83-227-198-253.cust.bredbandsbolaget.se] has joined #ubuntu === finalbeta [n=finalbet@d5152A68A.access.telenet.be] has joined #ubuntu === lillpelle [n=mickep@c-96cbe253.311-17-64736c12.cust.bredbandsbolaget.se] has joined #ubuntu === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu === itodd [n=itodd@chargedsoftware.com] has joined #ubuntu === Elpis [i=steffan@unaffiliated/cadet/bot/elpis] has joined #ubuntu === Sp4rKy [n=maxenced@ubuntu/member/sp4rky] has joined #ubuntu === scout [n=scout@0x535c02af.kjnxx6.adsl-dhcp.tele.dk] has joined #ubuntu === nolimitsoya [n=nolimits@176.139.216.81.static.vhe.siw.siwnet.net] has joined #ubuntu === the_Cat [n=jgrund@h16n1fls32o294.telia.com] has joined #ubuntu === Panaclerio [n=angelo@host175-67-dynamic.61-82-r.retail.telecomitalia.it] has joined #ubuntu === poopotootti [n=poopotoo@c193-229-37-194.elisa-laajakaista.fi] has joined #ubuntu === r0bby [i=wakawaka@guifications/user/r0bby] has joined #ubuntu === green_earz [n=admin@213-232-83-67.dsl.prodigynet.co.uk] has joined #ubuntu === Thuryn [n=thuryn@24.244.142.170] has joined #ubuntu === RaD|Tz [n=ubuntu61@189.168.33.74] has joined #ubuntu === ciaron [n=soth@cpc3-broo4-0-0-cust526.renf.cable.ntl.com] has joined #ubuntu === wanted1 [n=chatzill@124.104.16.143] has joined #ubuntu === cbx33 [n=pete@ubuntu/member/cbx33] has joined #ubuntu === [Jonne] [n=chatzill@114.86-64-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu === test3422 [n=test@220-245-202-201-wa-pppoe.tpgi.com.au] has joined #ubuntu === paras [n=paras@deltabravo.wifi93.eiu.edu] has joined #ubuntu === Jonbo [n=Jonbo123@adsl-074-229-245-180.sip.bhm.bellsouth.net] has joined #ubuntu === thansen [n=thansen@137.65.168.36] has joined #ubuntu === jonshea_ [n=jonshea@vpn-84-78.dartmouth.edu] has joined #ubuntu === Admiral_Chicago [n=freddy@66.99.72.2] has joined #ubuntu === StikkitJim [n=James@cpc1-staf3-0-0-cust99.brhm.cable.ntl.com] has joined #ubuntu === seraphim [n=seraphim@e179135051.adsl.alicedsl.de] has joined #ubuntu === aidanr [n=chatzill@193.120.73.238] has joined #ubuntu === GigaClon [n=gigaclon@n159s030.ntc.blacksburg.shentel.net] has joined #ubuntu === foo [n=foo@unaffiliated/foo] has joined #ubuntu === capgadget [n=elifino@adsl-69-149-32-251.dsl.rcsntx.swbell.net] has joined #ubuntu === OMF [n=OMF@130.80-203-114.nextgentel.com] has joined #ubuntu === brush01uk [n=brush01u@62-30-75-207.cable.ubr03.brom.blueyonder.co.uk] has joined #ubuntu === Xappe [i=xappe@razorconsulting.net] has joined #ubuntu === Visual|Cuisine [n=visualst@225.135-66-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu === Otacon22 [n=otacon22@85-18-201-171.ip.fastwebnet.it] has joined #ubuntu === M0E^lnx [n=M0E@216.110.0.30] has joined #ubuntu === Fallen_Angel [n=info@83.241.25.39] has joined #ubuntu === pielgrzym [n=pielgrzy@nat-ruczaj.lama.pl] has joined #ubuntu === JRGC_ [n=jaime@F5488.f.strato-dslnet.de] has joined #ubuntu === hoelk [n=hoelk@h081217035104.dyn.cm.kabsi.at] has joined #ubuntu === splatch [n=splatch@bur91-1-82-230-69-69.fbx.proxad.net] has joined #ubuntu === SS2 [n=SS2@dslb-084-057-054-081.pools.arcor-ip.net] has joined #ubuntu === Bassetts [n=Bassetts@cpc2-mapp1-0-0-cust630.nott.cable.ntl.com] has joined #ubuntu === samigaru [n=samigaru@218.93.201.146] has joined #ubuntu === androxxl [n=andro@84-255-238-62.static.dsl.t-2.net] has joined #ubuntu === wastrel [n=wastrel@dsl254-127-242.nyc1.dsl.speakeasy.net] has joined #ubuntu === humbraro [n=humbraro@mail.richardmrogerspc.com] has joined #ubuntu === sunyata [n=chris@c-24-19-26-184.hsd1.wa.comcast.net] has joined #ubuntu === Vaun [n=jws141@pool-151-204-24-71.pskn.east.verizon.net] has joined #ubuntu === bo__bo [n=bobo@dialup-4.160.243.188.Dial1.Cincinnati1.Level3.net] has joined #ubuntu === rooks [n=andrew@218-214-12-32.people.net.au] has joined #ubuntu === gilnim [n=gilnim@unaffiliated/gilnim] has joined #ubuntu === LinAsH [n=missmagu@179.211.119-80.rev.gaoland.net] has joined #ubuntu === lbm [n=lbm@82.192.173.92] has joined #ubuntu === Yvonne [n=01101110@pdpc/supporter/active/Yvonne] has joined #ubuntu === [Deathmaster] [n=Linux@ns4.g23.net] has joined #ubuntu === AskHL [n=ask@82.211.196.173] has joined #ubuntu === DerD [n=derd2@p54B3E631.dip.t-dialin.net] has joined #ubuntu === Alex_Palex [n=alex@adsl-ull-252-235.42-151.net24.it] has joined #ubuntu === noelferreira [n=noel@84.90.183.246] has joined #ubuntu === NChief [n=nchief@ti500720a080-9948.bb.online.no] has joined #ubuntu === _jl_ [n=JL@81.56.129.104] has joined #ubuntu === PacketScan [n=PacketSc@ool-45763453.dyn.optonline.net] has joined #ubuntu === Manny [n=chris@p5496C5BF.dip0.t-ipconnect.de] has joined #ubuntu === fulld [n=fulld@pool-70-20-216-66.phil.east.verizon.net] has joined #ubuntu === mRs- [n=server@p54814446.dip.t-dialin.net] has joined #ubuntu === rc55 [n=rc55@82.152.146.214] has joined #ubuntu === ro1 [n=ron@port0034-afo-adsl.cwjamaica.com] has joined #ubuntu === Renan_s2 [n=Renan@201.86.199.81.adsl.gvt.net.br] has joined #ubuntu === bettyboop1975 [n=bettyboo@213-140-21-233.fastres.net] has joined #ubuntu === sgorilla80 [n=tlp@user-0cet8gf.cable.mindspring.com] has joined #ubuntu === saxin [n=saxin@216-138-34.0513.adsl.tele2.no] has joined #ubuntu === PouUbnn2 [n=PouUbnn2@bas7-ottawa23-1088832413.dsl.bell.ca] has joined #ubuntu === quiet [n=quiet@unixcorps/staff/quiet] has joined #ubuntu === TheJF [n=redfox@mctnnbsa30w-156034049202.nb.aliant.net] has joined #ubuntu === adnans [n=adnans@linuxgoeroe.demon.nl] has joined #ubuntu === Subhuman|L [n=jack@host86-142-54-172.range86-142.btcentralplus.com] has joined #ubuntu === elate [n=elate@82.152.117.217] has joined #ubuntu === denver [n=denver@12.107.36.226] has joined #ubuntu === RodrigoX [n=Rodrigo@201-74-134-179-sj.cpe.vivax.com.br] has joined #ubuntu === mluser-work [n=MYoda@12.149.189.42] has joined #ubuntu === wbk [n=wbnik@209.217.197.116] has joined #ubuntu === htg_ [n=htg@82-38-195-78.cable.ubr04.shef.blueyonder.co.uk] has joined #ubuntu === draconius [n=j00@incognito.student.iastate.edu] has joined #ubuntu === sharms [n=sharms@ubuntu/member/sharms] has joined #ubuntu === cga [n=cga@213-140-6-101.ip.fastwebnet.it] has joined #ubuntu === d33p__ [n=d33p@87.217.147.106] has joined #ubuntu === jooony- [i=jony@1-1-3-33a.has.sth.bostream.se] has joined #ubuntu === tuna-fish [n=tuna@tunamasiina.kortex.jyu.fi] has joined #ubuntu === Milchmann [n=david@DSL01.83.171.148.236.ip-pool.NEFkom.net] has joined #ubuntu === Trixsey [n=secret@c-2b9072d5.012-2011-73746f31.cust.bredbandsbolaget.se] has joined #ubuntu === inc|freaky [i=alpha@freakyy.de] has joined #ubuntu === Doodluv [n=brad@24.214.206.158] has joined #ubuntu === richiefrich [n=dethwish@unaffiliated/richiefrich] has joined #ubuntu === ahaller [n=haller@134.102.133.79] has joined #ubuntu === SaLoMoN [n=SaLo@xglusers.de] has joined #ubuntu === Versed [n=Versed@c-69-253-173-154.hsd1.nj.comcast.net] has joined #ubuntu === StephenL [n=steve@216.62.85.65] has joined #ubuntu === jvolkman [n=jvolkman@208.17.32.27] has joined #ubuntu === Jay_Dogg [n=jukka@a88-112-84-95.elisa-laajakaista.fi] has joined #ubuntu === beasty [n=beasty@d54C2DC96.access.telenet.be] has joined #ubuntu === Hit3k_ [n=allan@203.212.129.118] has joined #ubuntu === colin_m [n=colin_m@dsl092-066-216.bos1.dsl.speakeasy.net] has joined #ubuntu === Japsu [i=japsu@unaffiliated/japsu] has joined #ubuntu === Mr_Congeniality [n=mr_conge@71-213-103-189.slkc.qwest.net] has joined #ubuntu === Qew [n=qew@82-69-126-225.dsl.in-addr.zen.co.uk] has joined #ubuntu === mkeadle [n=mkeadle@uslec-66-255-105-22.cust.uslec.net] has joined #ubuntu === thevenin [n=bushblow@adsl-75-7-204-35.dsl.lgtpmi.sbcglobal.net] has joined #ubuntu === Lahey [n=chatzill@CPE000d8846b4a2-CM000039050c63.cpe.net.cable.rogers.com] has joined #ubuntu === skunkworks [n=skunkwor@68-115-41-210.static.eucl.wi.charter.com] has joined #ubuntu === ulaas [n=ulas@ant-a5-02-asy17.ant-ro-01.superonline.com] has joined #ubuntu === TehUni [n=cory@c-67-191-139-148.hsd1.ga.comcast.net] has joined #ubuntu === HeathenDan [n=blarg@125.212.82.164] has joined #ubuntu === kmaynard [n=kmaynard@user-24-214-249-208.knology.net] has joined #ubuntu === _Er1K_ [i=erik@re-url.com] has joined #ubuntu === stylus_ [n=stylus@unaffiliated/stylus] has joined #ubuntu === doctorow [n=doctorow@68-65-221-88.vnnyca.adelphia.net] has joined #ubuntu === BoggsBeer [n=biglou@203-206-110-129.dyn.iinet.net.au] has joined #ubuntu === segfault [n=nobody@c-68-33-214-39.hsd1.md.comcast.net] has joined #ubuntu === Vaxu [n=vaxaren@adsl-36-5.regionline.fi] has joined #ubuntu === Gwildor [n=gwildor@h-66-134-148-176.sfldmidn.covad.net] has joined #ubuntu === phaedrus44 [n=michaels@rrcs-24-97-54-186.nys.biz.rr.com] has joined #ubuntu === Onni [n=me@e248221.upc-e.chello.nl] has joined #ubuntu === wglenncamp [n=wglennca@cblmdm72-240-87-29.buckeyecom.net] has joined #ubuntu === eggzeck [n=exec@cpe-68-175-49-54.nyc.res.rr.com] has joined #ubuntu === Kyral [n=kyral@ubuntu/member/kyral] has joined #ubuntu === loutrine [n=lew~@static-203-192-64-14.sa.chariot.net.au] has joined #ubuntu === Dasnipa` [n=Dasnipa@bravoseven.stev193.eiu.edu] has joined #ubuntu === MenZa [n=menza@unaffiliated/menza] has joined #ubuntu === cappicrd [n=cappicar@user-0calcop.cable.mindspring.com] has joined #ubuntu === Olathe [n=Olathe@12-201-73-22.client.mchsi.com] has joined #ubuntu === salus [n=sal@host-217-59.despolnet.pl] has joined #ubuntu === g8m [n=evil@cp82868-a.dbsch1.nb.home.nl] has joined #ubuntu === rc-1 [n=rc-1@c-24-125-35-80.hsd1.va.comcast.net] has joined #ubuntu === M0E-lnx [n=moe@adsl-70-240-108-184.dsl.hstntx.swbell.net] has joined #ubuntu === [GuS] [n=LnX@unaffiliated/gus/x-663402] has joined #ubuntu === darkangel [n=darkange@ip229-179-59-62.adsl.versatel.nl] has joined #ubuntu === leonel [n=leonel@189.155.119.220] has joined #ubuntu === Psy-X [n=Psy-x@adsl-158-226-224.asm.bellsouth.net] has joined #ubuntu === compengi [n=compengi@212.36.207.118] has joined #ubuntu === dseazrca [n=dsewnr@mail.cna.isu.edu.tw] has joined #ubuntu === tijn_tux [n=Rupert@a82-92-35-21.adsl.xs4all.nl] has joined #ubuntu === makro [i=felin@hopeatilhi.cs.tut.fi] has joined #ubuntu === render [n=render@213-140-21-234.fastres.net] has joined #ubuntu === ayaa [n=fourat@196.203.53.221] has joined #ubuntu === KillerDemon [n=hetisnui@h140058.upc-h.chello.nl] has joined #ubuntu === rem__ [n=rem@bas-flu-adsl-dynip-214-219.vtx.ch] has joined #ubuntu === knubbe [n=knubbe@h32n1c1o1036.bredband.skanova.com] has joined #ubuntu === irtool [n=irtool@p508C51C3.dip.t-dialin.net] has joined #ubuntu === multichil [i=multichi@nova.brewery.b33r.net] has joined #ubuntu === Eleaf [n=ethan@69.39.23.241] has joined #ubuntu === CheshireViking [n=Inter@i-195-137-101-182.freedom2surf.net] has joined #ubuntu === cemil [n=cemil@defiant.wavecon.de] has joined #ubuntu === apokryphos [n=apokryph@87-194-86-227.bethere.co.uk] has joined #ubuntu === morphish [n=morfic@sourcemage/mage/morfic] has joined #ubuntu === Lynvingen [n=christia@wlan-gw.hig.no] has joined #ubuntu === bugz_ [n=bugz@adsl-69-235-200-232.dsl.irvnca.pacbell.net] has joined #ubuntu === Griver [n=Griver@81-231-250-204-no52.tbcn.telia.com] has joined #ubuntu === hwt [n=hwt@curb.thorkildssen.com] has joined #ubuntu === dj_baggio [n=dj_baggi@yk66.internetdsl.tpnet.pl] has joined #ubuntu === vindrake [n=vindrake@AMontpellier-257-1-98-211.w86-219.abo.wanadoo.fr] has joined #ubuntu === svu_ [n=svu@83.167.239.56] has joined #ubuntu === tahorg [i=tahorg@lutin.jard.in] has joined #ubuntu === fix___ [n=fix@cable-87-244-191-89.upc.chello.be] has joined #ubuntu === Dybber [n=a@0x3e42d1c0.adsl.cybercity.dk] has joined #ubuntu === Zdra [n=zdra@54.196-241-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu === mareks [n=marek@CPE-70-92-232-88.wi.res.rr.com] has joined #ubuntu === webben [n=benjamin@91.84.18.157] has joined #ubuntu === StAfZe6 [n=StAfZe@host86-132-72-155.range86-132.btcentralplus.com] has joined #ubuntu === snowblink [n=snowblin@wind.snowblink.co.uk] has joined #ubuntu === krampo_ [n=krampo@krampis.cs.fmf.lu.lv] has joined #ubuntu === philc [n=reformis@72.173.30.38] has joined #ubuntu === desti [n=desti@p509239A7.dip0.t-ipconnect.de] has joined #ubuntu === LordMetroid [n=lordmetr@h196n3c1o885.bredband.skanova.com] has joined #ubuntu === vegiVamp [n=demeersm@unimatrix.skynet.be] has joined #ubuntu === Tusnal [i=Tusnal@87.235.85.106] has joined #ubuntu === inuyasharenegade [i=UPP@c-68-81-7-199.hsd1.de.comcast.net] has joined #ubuntu === RvGaTe [n=rvgate-f@g178204.upc-g.chello.nl] has joined #ubuntu === CarinArr [n=lq@opal.spod.org] has joined #ubuntu === Blue-Omega [n=Blue@about/cooking/nakedchef/omelette/Blue-Omega] has joined #ubuntu === Igd [n=Igd__@80-192-82-234.cable.ubr02.edin.blueyonder.co.uk] has joined #ubuntu === phaero [n=phaero@h73n2fls31o891.telia.com] has joined #ubuntu === hollywoodstar [n=a@c83-253-88-162.bredband.comhem.se] has joined #ubuntu === engla [n=ulrik@wikipedia/Sverdrup] has joined #ubuntu === Fanskapet [n=tommy@81-233-197-124-no88.tbcn.telia.com] has joined #ubuntu === Gnewf [n=Gnewf@GroupMackenzie.s11-1-0-16-0.ar3.SEA1.gblx.net] has joined #ubuntu === Whatsisname [n=whatsisn@c-75-72-177-215.hsd1.mn.comcast.net] has joined #ubuntu === summat [n=proddage@home.fraggy.co.uk] has joined #ubuntu === ke [n=kenneth@port272.ds1-aboes.adsl.cybercity.dk] has joined #ubuntu === Tschaka [n=tschaka@p54B3916C.dip0.t-ipconnect.de] has joined #ubuntu === reazn [n=reazn@reazn.ozdsl.net] has joined #ubuntu === str0ng [n=strong@203.131.142.36] has joined #ubuntu === Android`` [n=Android_@81-179-97-11.dsl.pipex.com] has joined #ubuntu === Mikes_ [n=michael@m41.net195-132-219.noos.fr] has joined #ubuntu === Chippy [n=Ch1ppy@S0106000d88a35c46.du.shawcable.net] has joined #ubuntu === Ecnassianer [n=ecna@cpe-76-168-247-163.socal.res.rr.com] has joined #ubuntu === Yaakov [i=yaakov@capybara.nd.edu] has joined #ubuntu === dr0ne [n=fn@CABLE-72-53-45-212.cia.com] has joined #ubuntu === ademan [n=dan@h-67-101-148-217.snfccasy.dynamic.covad.net] has joined #ubuntu === Lam_ [n=Lam@128.227.23.106] has joined #ubuntu === lotheac [n=lotheac@lamopinaatti.telemail.fi] has joined #ubuntu === fuu_ [n=fuu@dslc-082-082-087-046.pools.arcor-ip.net] has joined #ubuntu === Terminus [n=justin@210.213.149.89] has joined #ubuntu === darius_ [n=darius@integrity.bourg.net] has joined #ubuntu === digivore [n=digivore@S01060011950bc7e3.vc.shawcable.net] has joined #ubuntu === Phlosten [n=Phlosten@138.130.150.148] has joined #ubuntu === clop [n=jared@cpe-24-28-66-79.austin.res.rr.com] has joined #ubuntu === oKtosiTe-robot [n=oKtosiTe@unaffiliated/oKtosiTe] has joined #ubuntu === se7enone [n=anonymou@dsl-241-1-153.telkomadsl.co.za] has joined #ubuntu === mbamford [n=Matt@d207-81-186-112.bchsia.telus.net] has joined #ubuntu === Sir_Brizz [n=brizz@c-67-169-245-85.hsd1.ut.comcast.net] has joined #ubuntu === Tomcat_ [n=Tomcat@p54A18299.dip0.t-ipconnect.de] has joined #ubuntu === skelter [n=john@ool-4355b5dc.dyn.optonline.net] has joined #ubuntu === trappist [i=trappist@linuxkungfu.org] has joined #ubuntu === _human_blip_ [n=mike@220.157.65.29] has joined #ubuntu === knapp [n=knapp@67.58.93.134] has joined #ubuntu === |thunder [n=e@c-68-60-143-198.hsd1.mi.comcast.net] has joined #ubuntu === BluR [n=BluR@pool-141-157-171-206.bstnma.east.verizon.net] has joined #ubuntu === zenwhen [n=zenwhen@74.131.98.27] has joined #ubuntu === rosinante [n=espen@217.196.49.213] has joined #ubuntu === smash__ [n=smash@p54B2D75A.dip.t-dialin.net] has joined #ubuntu === Crescendo [n=GWing@cpe-069-134-227-094.nc.res.rr.com] has joined #ubuntu === ablyss [n=ablyss@71.81.22.108] has joined #ubuntu === rexbron [n=rexbron@complex1-372-148.resnet.yorku.ca] has joined #ubuntu === lamer0__ [n=lamer0@69.46.27.117] has joined #ubuntu === Shadowline [n=shadowli@ppp-69-221-227-159.dsl.klmzmi.ameritech.net] has joined #ubuntu === Aven [n=asd@adsl-69-231-37-193.dsl.irvnca.pacbell.net] has joined #ubuntu === jmworx [n=jmworx@theorix.CeNTIE.NET.au] has joined #ubuntu === chris_ [n=chris@S01060016b649355d.ed.shawcable.net] has joined #ubuntu === zcat[1] [n=zcat@60-234-226-80.bitstream.orcon.net.nz] has joined #ubuntu === xtr-III [n=01897268@staff-nat.netnation.com] has joined #ubuntu === bwlang_ [n=bwlang@bb-66-55-211-238.gwi.net] has joined #ubuntu === BelialMkII [n=Dave@62.6.163.130] has joined #ubuntu === Maverynthia [i=WinNT@105-122.202-68.tampabay.res.rr.com] has joined #ubuntu === NO [n=identd@skyberate.net] has joined #ubuntu === paran [n=paran@cl-56.sto-01.se.sixxs.net] has joined #ubuntu === justin420 [n=Justin@69.92.132.245] has joined #ubuntu === ichyto [n=Stu@c211-28-48-117.frank1.vic.optusnet.com.au] has joined #ubuntu === FunnyLookinHat [n=david@64.140.73.93] has joined #ubuntu === noaXess_kubuntu_ [n=noaXess_@cust.static.217-11-45-147.cybernet.ch] has joined #ubuntu === Ashley` [n=TXtoucia@ppp117-210.lns1.bne4.internode.on.net] has joined #ubuntu === CablD_Ubuntu [n=cabldevi@ool-4573d8bb.dyn.optonline.net] has joined #ubuntu === markl_ [i=mark@c-67-166-114-6.hsd1.ut.comcast.net] has joined #ubuntu === lancetw [n=lancetw@140.128.194.90] has joined #ubuntu === xp_prg [n=anonymou@ftp.microvu.com] has joined #ubuntu === ToonArmy [n=chris@Lafrowda-14.ex.ac.uk] has joined #ubuntu === linuxboy_ [n=anon@yoda.frogfoot.net] has joined #ubuntu === shwag [n=steven@66.101.109.10] has joined #ubuntu === yuriy [n=yuriy@dhcp-129-64-153-72.dorm.brandeis.edu] has joined #ubuntu === C0VER [n=tiago@201008216120.user.veloxzone.com.br] has joined #ubuntu === lukinhas64bits [i=1000@201.21.232.80] has joined #ubuntu === plod [i=plod@aurora.ukshells.co.uk] has joined #ubuntu === nkassi_ [n=nkassi@WK20-156.lewisweb.net] has joined #ubuntu === teThys [n=jfranji@83-131-30-236.adsl.net.t-com.hr] has joined #ubuntu === redguy [n=mati@public-gprs19093.centertel.pl] has joined #ubuntu === botxj [n=niklesod@ip70-187-199-233.dc.dc.cox.net] has joined #ubuntu === Glutinous [n=steven@ppp170-152.lns1.per1.internode.on.net] has joined #ubuntu === FlimFlamMan [n=FlimFlam@d65h243.public.uconn.edu] has joined #ubuntu === kyja [n=kyja@70-41-157-167.cust.wildblue.net] has joined #ubuntu === Akewa [i=akewa@dione.lostdomain.org] has joined #ubuntu === dusk [n=dusk@zulu.ccs.neu.edu] has joined #ubuntu === eXistenZ [n=amerdakk@unaffiliated/eXistenZ] has joined #ubuntu === bLaZeD [n=wls@unaffiliated/blazed] has joined #ubuntu === macsim [n=macsim@cpc1-lewi5-0-0-cust467.bmly.cable.ntl.com] has joined #ubuntu === MrFatJack [n=MrFatJac@pool-71-240-185-166.dllstx.fios.verizon.net] has joined #ubuntu === msturm [n=martin@253-19-ftth.onsnetstudenten.nl] has joined #ubuntu === AlienX [n=theanswr@unaffiliated/alienx] has joined #ubuntu === dhr [n=hugh@CPE00606767ed59-CM000f9fa81660.cpe.net.cable.rogers.com] has joined #ubuntu === poningru [n=poningru@ip72-209-68-178.ga.at.cox.net] has joined #ubuntu === stocksy [i=stocksy@stocksy.co.uk] has joined #ubuntu === ryanakca [n=ryan@unaffiliated/ryanakca] has joined #ubuntu === Stormx2 [n=Stormx2@host-87-240-137-127.hi-velocity.net] has joined #ubuntu === cafuego [n=cafuego@ppp81-20.lns2.mel3.internode.on.net] has joined #ubuntu === sc0tty [n=yann@ARennes-257-1-121-60.w86-210.abo.wanadoo.fr] has joined #ubuntu === AfterDeath|idle [n=Afterdea@about/linux/regular/afterdeath] has joined #ubuntu === lux` [n=lux@host-84-222-130-200.cust-adsl.tiscali.it] has joined #ubuntu === acidjames_ [i=james@ABordeaux-152-1-14-210.w82-125.abo.wanadoo.fr] has joined #ubuntu === Oetzi [i=oetzi@gletschereis.net] has joined #ubuntu === jsleeper [n=jsleeper@ip68-225-35-102.hr.hr.cox.net] has joined #ubuntu === Jettis [n=h0h0@a88-113-56-216.elisa-laajakaista.fi] has joined #ubuntu === foomanchew [n=elmo@outbound.gettyimages.com] has joined #ubuntu === PiPak [n=asddas@adsl-84-227-58-139.adslplus.ch] has joined #ubuntu === livingtm [n=livingtm@cpe-74-67-15-162.nycap.res.rr.com] has joined #ubuntu === spacey [n=herman@ubuntu/member/spacey] has joined #ubuntu === DelPede [i=Exnay@port91.ds1-abc.adsl.cybercity.dk] has joined #ubuntu === Centaur5 [n=fishman@209-33-228-51.dsl.infowest.net] has joined #ubuntu === roland-erau [n=martyr@node230-105.unnamed.db.erau.edu] has joined #ubuntu === runge [n=runge@c-addae255.215-5-64736c10.cust.bredbandsbolaget.se] has joined #ubuntu === caplink811_log [n=caplink8@dslb-088-073-141-145.pools.arcor-ip.net] has joined #ubuntu === foolswisdom [n=lloyd@d154-5-114-228.bchsia.telus.net] has joined #ubuntu === Linuturk [n=Linuturk@12.11.93.98] has joined #ubuntu === Subhuman [n=jack@host86-142-54-172.range86-142.btcentralplus.com] has joined #ubuntu === dou213 [n=x@e180249142.adsl.alicedsl.de] has joined #ubuntu === Administrator_ [n=Administ@ip503d4396.speed.planet.nl] has joined #ubuntu === dings [i=lekang@cassarossa.samfundet.no] has joined #ubuntu === shrndegruv [n=mharris@c-68-49-174-241.hsd1.dc.comcast.net] has joined #ubuntu === tat [i=trygve@ns112b.studby.ntnu.no] has joined #ubuntu === slicslak [n=slicslak@S01060014bf23e2d1.ed.shawcable.net] has joined #ubuntu === inimesekene [n=inimesek@80-235-71-48-dsl.trt.estpak.ee] has joined #ubuntu === tdn [n=tdn@zeus.sikkerhed.org] has joined #ubuntu === Dannilion [n=danni@cust18-dsl53.idnet.net] has joined #ubuntu === duckdown [i=airfoil@unaffiliated/duckdown] has joined #ubuntu === sig [n=sig@unaffiliated/sig] has joined #ubuntu === Adrian_S [n=Adrian@d5-168.dip.axsp.de] has joined #ubuntu === datil [i=sick@157.Red-213-97-29.staticIP.rima-tde.net] has joined #ubuntu === [H5N1] [i=mrflu@laggy.us] has joined #ubuntu === peterhu [n=peterhu@about/csharp/regular/peterhu] has joined #ubuntu === XiXaQ [n=joerlend@84.236.191.107] has joined #ubuntu === Cre[a] tiveEmb[a] [i=cjudy@71.58.96.35] has joined #ubuntu === nkassi__ [n=nkassi@mullion.maint.fsu.edu] has joined #ubuntu === xorllu [n=xorllu@ira.cs.llu.lv] has joined #ubuntu === dreamer [i=dreamer@137.224.241.21] has joined #ubuntu === slop [n=juztin@68-184-133-6.dhcp.stbr.ga.charter.com] has joined #ubuntu === lupine_85 [n=lupine@nick.lupine.me.uk] has joined #ubuntu === mheath[laptop] [i=mheath@c-67-182-231-23.hsd1.co.comcast.net] has joined #ubuntu === Ash-Fox [i=UNKNOWN@fgd182.internetdsl.tpnet.pl] has joined #ubuntu === G0SUB [i=ghoseb@ubuntu/member/gosub] has joined #ubuntu === Alam_Ubuntu [n=alam@134.241.28.44] has joined #ubuntu === _psych[0] [i=psych0@psych0.us] has joined #ubuntu === keith80403 [n=keith804@24-56-189-80.co.warpdriveonline.com] has joined #ubuntu === Gerrath [n=Shane_@unaffiliated/gerrath] has joined #ubuntu === darkposeiden [n=123@198.170.183.130] has joined #ubuntu === dfgas_ [n=dfgas@adsl-75-51-11-32.dsl.milwwi.sbcglobal.net] has joined #ubuntu === fdoving [n=frode@ubuntu/member/frode] has joined #ubuntu === gyaresu [n=gyaresu@124.243.140.29] has joined #ubuntu === Delkster [i=mwahlroo@myntti.helsinki.fi] has joined #ubuntu === mesha [i=waronen@myntti.helsinki.fi] has joined #ubuntu === lance_ [n=sdfsdf@60-234-134-230.bitstream.orcon.net.nz] has joined #ubuntu === Nameeater [i=dean@unaffiliated/Nameeater] has joined #ubuntu === dAndy [i=dandy@opal.cat.pdx.edu] has joined #ubuntu === floating [i=vnaatane@rhea.oamk.fi] has joined #ubuntu === variant [n=variant@unaffiliated/variant] has joined #ubuntu === jmspeex [n=jmspeex@142.163.233.220.exetel.com.au] has joined #ubuntu === sundari [n=sundari@pool-72-68-155-106.nycmny.fios.verizon.net] has joined #ubuntu === OPTiCO [n=optico@216-172-19.112220.adsl.tele2.no] has joined #ubuntu === kalila [n=kalila@80-47-49-245.lond-hex.dynamic.dial.as9105.com] has joined #ubuntu === SmokeyD [n=dolf@droev209.athome242.wau.nl] has joined #ubuntu === Tonus [i=casper@tulis.dsinet.org] has joined #ubuntu === BrianG [n=pastafzu@unaffiliated/gurt] has joined #ubuntu === Binja [n=binja@smtp.adocca.net] has joined #ubuntu === J4t [n=nnjonata@c213-100-27-45.swipnet.se] has joined #ubuntu === rsa| [n=rsamson@linagoraberri.pck.nerim.net] has joined #ubuntu === linuxmigration [n=jeremy@dsl254-075-124.nyc1.dsl.speakeasy.net] has joined #ubuntu === happy_broccoli [i=hperes@205.196.208.21] has joined #ubuntu === ctd [i=ctd@incubus.progsoc.uts.edu.au] has joined #ubuntu === fatlip [n=daveyj@ool-44c2d1f8.dyn.optonline.net] has joined #ubuntu === Hexidigital [n=Hexidigi@unaffiliated/hexidigital] has joined #ubuntu === ushineko [n=nverenin@cpe-75-80-147-91.san.res.rr.com] has joined #ubuntu === czer323 [n=czer323@cpe-24-26-159-208.columbus.res.rr.com] has joined #ubuntu === Tokenbad [n=tokenbad@c-71-237-151-151.hsd1.or.comcast.net] has joined #ubuntu === Hoxxin [i=Hoxx@v136.ip1.netikka.fi] has joined #ubuntu === ds5 [n=etowunde@cpe-76-184-86-206.tx.res.rr.com] has joined #ubuntu === goofey [n=greg@adsl-68-121-160-151.dsl.pltn13.pacbell.net] has joined #ubuntu === NeoEcoS [n=NeoEcoS@cable201-233-16-24.epm.net.co] has joined #ubuntu === SportChick [n=essy@about/essy/stouterik/pdpc.base.SportChick] has joined #ubuntu === ubotu [n=ubotu@ubuntu/bot/ubotu] has joined #ubuntu === Ubugtu [n=bugbot@ubuntu/bot/ubugtu] has joined #ubuntu === fiveiron [n=fiveiron@74.137.132.103] has joined #ubuntu === __zen__ [n=Vincent@59.108.23.194] has joined #ubuntu === legion_nux [n=toto@39.199.118.70.cfl.res.rr.com] has joined #ubuntu === Elko [n=elko@cp34987-a.roose1.nb.home.nl] has joined #ubuntu === okapi [n=okapi@ool-4354c2f9.dyn.optonline.net] has joined #ubuntu === kliwon [i=kliwon@2001:5c0:8f97:0:0:0:0:dead] has joined #ubuntu === mako [i=mako@bork.hampshire.edu] has joined #ubuntu === adrenaline [n=mike@mail.area425.net] has joined #ubuntu === redorbs [n=redorbs@s5593c8b0.adsl.wanadoo.nl] has joined #ubuntu === TomB| [n=ownthebo@host217-44-6-189.range217-44.btcentralplus.com] has joined #ubuntu === Zibby [n=zibby@3.14159265358979323846264338327950288419716939937510582097.org] has joined #ubuntu === UdontKnow [i=udontkno@freenode/staff/udontknow] has joined #ubuntu === tonyyarusso [n=anthony@d235-240-148.home1.cgocable.net] has joined #ubuntu === bluefox83 [n=bluefox@user-12hclic.cable.mindspring.com] has joined #ubuntu === charles [n=charles@home.cs.colorado.edu] has joined #ubuntu === Tejh [n=Miranda@cpe-74-71-90-223.twcny.res.rr.com] has joined #ubuntu === Khisanth [n=Khisanth@pool-71-247-16-251.nycmny.east.verizon.net] has joined #ubuntu === ClayG_ [n=clay@c-66-177-234-251.hsd1.fl.comcast.net] has joined #ubuntu === ClayG [n=clay@c-66-177-234-251.hsd1.fl.comcast.net] has joined #ubuntu === apecat [n=apecat@thrashbarg.net] has joined #ubuntu === Alex [i=hauntedu@gentoo/user/Alex] has joined #ubuntu === voltz [n=voltz@93.69.233.220.exetel.com.au] has joined #ubuntu === c0d3h4ck [n=Hyunsik@disys18.korea.ac.kr] has joined #ubuntu === znull [n=z@tiger.purple-host.com] has joined #ubuntu === aergern [i=ben@apogee.whack.org] has joined #ubuntu === animal_ [n=animal_@200.122.148.115] has joined #ubuntu === Faithful [n=Faithful@ns.linuxterminal.com] has joined #ubuntu === bcnl [n=mike@S010600131078957c.vc.shawcable.net] has joined #ubuntu === knix [n=knix@unaffiliated/knix] has joined #ubuntu === Intangir [i=Intangir@cpe-70-123-125-234.houston.res.rr.com] has joined #ubuntu === Fastly [n=fafsa@85-210-184-55.dsl.pipex.com] has joined #ubuntu === fabiim [n=balayhas@a213-22-211-55.cpe.netcabo.pt] has joined #ubuntu === GTX [i=charlie@pdpc/supporter/monthlybronze/GTX] has joined #ubuntu === marsu [n=user@c83-252-78-72.bredband.comhem.se] has joined #ubuntu === gr33npho3nix [n=turk@hera.ccs.neu.edu] has joined #ubuntu === gourdin [n=adept@bdv75-2-82-66-242-118.fbx.proxad.net] has joined #ubuntu === blinx [n=blinx@unixboard/user/blinx] has joined #ubuntu === Gods_gift [n=userx@netra.ig.pwr.wroc.pl] has joined #ubuntu === Fastly_ [n=alex@81-86-145-67.dsl.pipex.com] has joined #ubuntu === PhilCote [i=PhilCote@Toronto-HSE-ppp3760960.sympatico.ca] has joined #ubuntu === dcraven [n=dcraven@70.31.180.102] has joined #ubuntu === jorgp [n=jorgp@adsl-70-234-108-24.dsl.tul2ok.sbcglobal.net] has joined #ubuntu === FrankieShoelaces [n=FrankieS@cpe-24-168-111-195.si.res.rr.com] has joined #ubuntu === Dink [i=Dink@208.53.141.130] has joined #ubuntu === Ekushey [n=Russell@208.53.183.105] has joined #ubuntu === tsw [i=tsw@backspace.fi] has joined #ubuntu === ph8 [i=henri@rigel.orion-hosting.co.uk] has joined #ubuntu === Tom39Away [n=tom@198.105.45.202] has joined #ubuntu === inzion [n=inzion@82.197.162.58] has joined #ubuntu === eno [n=eno@nslu2-linux/eno] has joined #ubuntu === mat|work [n=mat@igoan/mat] has joined #ubuntu === rpc [i=fast@84-16-236-205.internetserviceteam.com] has joined #ubuntu === brum [n=brum@24-247-7-12.dhcp.aldl.mi.charter.com] has joined #ubuntu === Zajjko [n=Zajjko@81-234-204-3-no118.tbcn.telia.com] has joined #ubuntu === Yourname` [n=no@216.191.78.170] has joined #ubuntu === CarlFK [n=carl@c-24-13-53-221.hsd1.il.comcast.net] has joined #ubuntu === Mixx` [i=mixx@d60-65-201-134.col.wideopenwest.com] has joined #ubuntu === aoupi [n=aoupi@c-bb65e253.357-1-64736c10.cust.bredbandsbolaget.se] has joined #ubuntu === mooseman447 [n=mooseman@24.229.203.37.res-cmts.sm.ptd.net] has joined #ubuntu === Kingsqueak [n=who@c-68-38-166-84.hsd1.nj.comcast.net] has joined #ubuntu === mentok [n=mentok@camus.nrl.navy.mil] has joined #ubuntu === |rt| [n=realthin@c-66-31-5-173.hsd1.nh.comcast.net] has joined #ubuntu === Hoxzer [n=hox@dsl-hkigw2-fe1ede00-55.dhcp.inet.fi] has joined #ubuntu === cyzie [n=cyzie@219.95.203.81] has joined #ubuntu === Skygge_ [n=Skygge@ppp18-66.lns2.syd7.internode.on.net] has joined #ubuntu === starkruzr [n=jtd@adsl-76-208-4-252.dsl.sbndin.sbcglobal.net] has joined #ubuntu === kraut [i=fek@blackhole.packetloss.biz] has joined #ubuntu === rage [i=rage@shell.iinet.net.au] has joined #ubuntu === _Legion_ [n=adebarba@200.69.215.69] has joined #ubuntu === Agrajag_ [n=zaphod@cpe-72-134-76-50.socal.res.rr.com] has joined #ubuntu === bronze [n=Lester@c-71-233-244-55.hsd1.ma.comcast.net] has joined #ubuntu === sidewalk` [i=sidewalk@shell.glassbilen.net] has joined #ubuntu === sc0tt [n=sc0tt@cpc2-stok5-0-0-cust567.bagu.cable.ntl.com] has joined #ubuntu === polttaja [i=polttaja@irkkaajat.org] has joined #ubuntu === fildo [n=fildo@c58-107-108-125.livrp1.nsw.optusnet.com.au] has joined #ubuntu === Tigge [n=tigge@bacchus.olf.sgsnet.se] has joined #ubuntu === bobslaede [n=bob@0x5552b066.adsl.cybercity.dk] has joined #ubuntu === rndax [i=adam@dieor.freelive.org] has joined #ubuntu === Kaja [n=kaja@bb-81-175-201-136.dsl.phnet.fi] has joined #ubuntu === teun [i=teun@lanfear.moonblade.net] has joined #ubuntu === bigjb [n=bigjb@195.60.10.114] has joined #ubuntu === erie [i=erie@killerbrownie.com] has joined #ubuntu === Crusher [n=You@124-254-109-39-dsl.ispone.net.au] has joined #ubuntu === ISOLATEDViRuS [n=ISOLATED@pool-68-236-20-101.phil.east.verizon.net] has joined #ubuntu === Aondo [i=stian@85.19.195.69] has joined #ubuntu === atrus [i=atrus@S01060000b48e3b44.cg.shawcable.net] has joined #ubuntu === Heartsbane [n=ne1469@166.70.210.102] has joined #ubuntu === macd [n=d@adsl-156-75-132.msy.bellsouth.net] has joined #ubuntu === g333k [n=g333k@190.40.110.101] has joined #ubuntu === totall_6_7 [n=Freaky@c-67-189-91-111.hsd1.or.comcast.net] has joined #ubuntu === crochat [i=crochat@84-74-145-66.dclient.hispeed.ch] has joined #ubuntu === cappiz [i=cappiz@gw.mainframe.no] has joined #ubuntu === Rydekull [i=rydekull@luda/rydekull] has joined #ubuntu === lawine [n=geert@80.247.197.153] has joined #ubuntu === mvirkkil [n=mvirkkil@kosh.hut.fi] has joined #ubuntu === KlemenS [n=klemen@incubator.trionet.si] has joined #ubuntu === ronaldo [i=ronaldo@coyote.noc.realroot.com] has joined #ubuntu === Rockj [i=rockj@158.38.48.24] has joined #ubuntu === Gumli [i=gimli@staff.boomtown.net] has joined #ubuntu === wijnand [n=wijnand@209.69.98.10] has joined #ubuntu === shredder [n=tomas@walter.primekey.se] has joined #ubuntu === snoops [n=blah@203-97-119-118.cable.telstraclear.net] has joined #ubuntu === ajmitch [n=ajmitch@ubuntu/member/ajmitch] has joined #ubuntu === BasL [n=bas@tuxmachine.xs4all.nl] has joined #ubuntu === zzap [i=zzap@zzaps.com] has joined #ubuntu === anonymeeee [n=imatech@c-24-23-55-237.hsd1.ca.comcast.net] has joined #ubuntu === WS [i=1000@c-5d49e455.026-92-73746f34.cust.bredbandsbolaget.se] has joined #ubuntu === BlueEagle [n=blueeagl@ti541210a340-1940.bb.online.no] has joined #ubuntu === Penguin [n=penguin@penguin.thezooclan.com] has joined #ubuntu === Fade [n=fade@66.207.216.43] has joined #ubuntu === mlehrer_work [n=mlehrer@pollux.northsky.com] has joined #ubuntu === boink [n=cynase@ebi.xs4all.nl] has joined #ubuntu === eternale1 [i=eternale@c-71-194-189-139.hsd1.il.comcast.net] has joined #ubuntu === DBO [n=DBO@unaffiliated/dbo] has joined #ubuntu === RemoteViewer [n=555@stan.physik.fu-berlin.de] has joined #ubuntu === Legendre [i=legendre@chef.nerp.net] has joined #ubuntu === sladen [i=paul@193.28.45.41] has joined #ubuntu === mathieu [n=slicks@193.190.253.200] has joined #ubuntu === elljay [i=lj@72.20.14.98] has joined #ubuntu === Dark_Bahamut [n=dragonlo@70.238.111.109] has joined #ubuntu === zloc [n=zloc@24.244.156.212] has joined #ubuntu === cached_ [n=x@218.212.200.247] has joined #ubuntu === orion2012 [n=orion@70.114.30.76] has joined #ubuntu === GnarlyBob [n=chris@24.62.174.53] has joined #ubuntu === alex_ubuntu [n=alex@wnpgmb11dc1-26-178.dynamic.mts.net] has joined #ubuntu === circusbred [n=circusbr@68.41.173.146] has joined #ubuntu === PecisDarbs [n=pecisk@62.85.86.242] has joined #ubuntu === dwango [n=dwango@c-69-248-206-201.hsd1.pa.comcast.net] has joined #ubuntu === QMario [n=QMario@unaffiliated/QMario] has joined #ubuntu === mathrick|away [n=mathrick@nat.kollegienet.dk] has joined #ubuntu === eeboy [n=eeboy@dsl01-ppp-3782.fastq.com] has joined #ubuntu === poncho1 [n=poncho@69.27.195.104] has joined #ubuntu === Riddell [i=jr@kde/jriddell] has joined #ubuntu === KDan [i=nobody@sleek.sleektech.nl] has joined #ubuntu === Kyynara [n=pate@hoas-fe33dd00-63.dhcp.inet.fi] has joined #ubuntu === n1c0las [n=nicolas@nicolas.xs4all.nl] has joined #ubuntu === neuro_ [n=neuro@neuro.me.uk] has joined #ubuntu === MM2 [n=moversti@edu.haapavesi.fi] has joined #ubuntu === jerrcs [i=jerrcs@c-69-255-253-184.hsd1.md.comcast.net] has joined #ubuntu === kbrosnan [n=kbrosnan@ip68-9-230-88.ri.ri.cox.net] has joined #ubuntu === moonlite [n=moonlite@starbase.olf.sgsnet.se] has joined #ubuntu === dougsko [n=doug@c-24-131-69-39.hsd1.pa.comcast.net] has joined #ubuntu === xerophyte [n=xerophyt@CPE00400559e956-CM014310117547.cpe.net.cable.rogers.com] has joined #ubuntu === fishsponge_ [n=fishspon@82.111.18.83] has joined #ubuntu === jbroome [n=jbroome@unaffiliated/jbroome] has joined #ubuntu === Filbert [n=filbert@d54C14421.access.telenet.be] has joined #ubuntu === preaction [n=doug@static-72-1-4-143.ntd.net] has joined #ubuntu === Carry [n=chatzill@zqxzwr.xs4all.nl] has joined #ubuntu === mfmf [n=mfmf@access.glocalnet.com] has joined #ubuntu === nemish [n=nEmiSH@ool-18be0779.dyn.optonline.net] has joined #ubuntu === keescook [n=kees@ubuntu/member/keescook] has joined #ubuntu === xeros [i=xeros@fan194.internetdsl.tpnet.pl] has joined #ubuntu === FeistyFawn [n=seveas@ubuntu/member/seveas] has joined #ubuntu === K^Holtz [n=K_Holtz@KIH5005.rh.psu.edu] has joined #ubuntu === tomsku [n=tomsku@dsl-tregw3-fe4ddf00-223.dhcp.inet.fi] has joined #ubuntu === sjbrown [n=sjbrown@mailout1.vmware.com] has joined #ubuntu === der0b [n=mds@c-24-63-35-182.hsd1.ma.comcast.net] has joined #ubuntu === brutopia [i=brutopia@koopa.saunalahti.fi] has joined #ubuntu === jpaper [n=jpape@15.238.5.30] has joined #ubuntu === Firetech [n=Jocke@amarok/rokymotion/Firetech] has joined #ubuntu === phargle [n=phargle@adsl-68-127-77-94.dsl.lsan03.pacbell.net] has joined #ubuntu === moot [n=moot@pool-71-111-212-179.rlghnc.dsl-w.verizon.net] has joined #ubuntu === robert_ [n=hellspaw@objectx/robert] has joined #ubuntu === Alpha3 [n=alpha@c0re.biz] has joined #ubuntu === Beta_M [n=Somebody@85-95-106-91.adsl.izrsolutions.com] has joined #ubuntu === bloch [n=lol@67.170.7.94] has joined #ubuntu === avaruus [n=amp@hoas-fe3bdd00-164.dhcp.inet.fi] has joined #ubuntu === drivera90 [i=deus@wikipedia/Drivera90] has joined #ubuntu === lanxu [i=julankin@jumi.lut.fi] has joined #ubuntu === Trae [n=october@ip24-252-207-46.mc.at.cox.net] has joined #ubuntu === vmlintu [n=vmlintu@haiti.ykkonen.net] has joined #ubuntu === mat [n=mat@igoan/mat] has joined #ubuntu === samiam [n=samurai@74.134.155.212] has joined #ubuntu === Magilla [i=bolandl@die.k-thx.biz] has joined #ubuntu === lakupuu [n=lakupuu@priima.paivola.fi] has joined #ubuntu === heikki [i=heikki@a81-197-9-9.elisa-laajakaista.fi] has joined #ubuntu === Bjoern-Erik [n=unknown@67.80-202-110.nextgentel.com] has joined #ubuntu === NetHaxor [i=fulgore@rm-rf.root.ws] has joined #ubuntu === joch [n=zeth@pc77-134.telge.kth.se] has joined #ubuntu === tim__b [i=haut@indy-fresse.de] has joined #ubuntu === Juhaz [i=voas0113@koopa.saunalahti.fi] has joined #ubuntu === Penguin_ [i=penguin@penguin.thezooclan.com] has joined #ubuntu === dooglus [n=dooglus@82.67.28.79] has joined #ubuntu === aba_ [i=aba@redruth.greenbean.org] has joined #ubuntu === tritium [n=tritium@ubuntu/member/tritium] has joined #ubuntu === tang^ [n=tang@S01060011d849d10f.cg.shawcable.net] has joined #ubuntu === johns^ [n=john@decande.xs4all.nl] has joined #ubuntu === daxxar [i=daxxar@daxxar.com] has joined #ubuntu === Sugar^ [n=akh@193.3.39.33] has joined #ubuntu === rellis [n=kvirc@66.60.179.61] has joined #ubuntu === eracc [n=eracc@72-4-41-2.365-2.jaxnet.net] has joined #ubuntu === toyo [n=test@ip70-160-27-40.hr.hr.cox.net] has joined #ubuntu === _azrael [n=azrael@DHCP-155-121.caltech.edu] has joined #ubuntu === pgurumur [n=pgurumur@c-67-188-138-32.hsd1.ca.comcast.net] has joined #ubuntu === tmitchell [n=councilo@66-214-31-89.dhcp.lnbh.ca.charter.com] has joined #ubuntu === dizzie [i=dizzie@is.a.big.fat.cow.saying.mooo.com] has joined #ubuntu === wasabi [n=wasabi@ubuntu/member/wasabi] has joined #ubuntu === sjoerd [n=sjoerd@simons.xs4all.nl] has joined #ubuntu === Raskall [n=rolfas@rolfas.net] has joined #ubuntu === mcphail [n=mcphail@dyn-62-56-113-66.dslaccess.co.uk] has joined #ubuntu === Zambezi [i=Hideit@dns-cache2.tixit.se] has joined #ubuntu === Xteven [i=deepstar@ekonomika.ekon.student.kuleuven.be] has joined #ubuntu === ccooke [n=ccooke@spc1-walt5-0-0-cust406.asfd.broadband.ntl.com] has joined #ubuntu === zambaboo [n=zamba@209.216.245.214] has joined #ubuntu === NK` [i=niko@213.151.173.210] has joined #ubuntu === Oompa [i=Oompa@cpe-76-185-186-242.tx.res.rr.com] has joined #ubuntu === Tristan [n=Tristan@A.Condom.Made.My.Firewall.Pr0tected.us] has joined #ubuntu === klaas [i=klaas@simply.kla.as] has joined #ubuntu === fortran01 [i=che_sosa@orbit.sh3lls.net] has joined #ubuntu === [PUPPETS] Gonzo [n=gonzo@80.69.47.16] has joined #ubuntu === freezey [n=administ@mail.rjtcpp.com] has joined #ubuntu === EvilGrin [n=gking@80-193-144-85.cable.ubr01.pres.blueyonder.co.uk] has joined #ubuntu === armeida [n=armeida^@213.144.15.38] has joined #ubuntu === [L30N] [i=l30n@quantum.ukshells.co.uk] has joined #ubuntu === _max_ [i=xXx@64.18.141.151] has joined #ubuntu === jcmcbeth [n=jcmcbeth@cpe-071-068-038-124.carolina.res.rr.com] has joined #ubuntu === Lynix [n=weeker@61.129.74.30] has joined #ubuntu === elmargol [n=elmargol@host4-61.pool8248.interbusiness.it] has joined #ubuntu === nacer [n=nacer@80.245.57.40] has joined #ubuntu === Aliases [n=nicko@87.69.30.156.cable.012.net.il] has joined #ubuntu === spoop [n=p@wolcott-cuda1-24-49-137-239.albyny.adelphia.net] has joined #ubuntu === ganadist [n=ganadist@ganadist.mizi.com] has joined #ubuntu === rdz [n=roman@netpd.org] has joined #ubuntu === padan [i=notroot@helen.anssolution.com] has joined #ubuntu === troxor [n=boyo@rrcs-24-227-213-34.sw.biz.rr.com] has joined #ubuntu === iter [i=iter@obliviated.org] has joined #ubuntu === audreyt [i=audreyt@feather.perl6.nl] has joined #ubuntu === Boll [n=boll@freesbee.wheel.dk] has joined #ubuntu === Chousuke [i=oranenj@jolt.modeemi.cs.tut.fi] has joined #ubuntu === diesel [n=dlong@208.177.140.10.ptr.us.xo.net] has joined #ubuntu === strlen [i=af@66.160.171.42] has joined #ubuntu === lnx^ [i=lnx@194.100.84.76] has joined #ubuntu === vertigo [i=spleneti@ns.fbi.be] has joined #ubuntu === VoX [n=vox@unaffiliated/vox] has joined #ubuntu === asw [n=asw@karuna.med.harvard.edu] has joined #ubuntu === paradizelost [n=dan@host-69-129-220-24.midco.net] has joined #ubuntu === felipe [n=felipe@my.nada.kth.se] has joined #ubuntu === cricht0ff [i=crichton@moyatec.de] has joined #ubuntu === bXi [i=bluepunk@irssi.co.uk] has joined #ubuntu === SpComb [i=terom@zapotek.paivola.fi] has joined #ubuntu === drv [n=asbjorn@kekkonen.cs.hut.fi] has joined #ubuntu === sinjar [n=sinjar@24-196-81-126.dhcp.mdsn.wi.charter.com] has joined #ubuntu === ifireball [n=iearthba@IGLD-80-230-53-31.inter.net.il] has joined #ubuntu === crass [n=crass@rrcs-24-73-245-194.sw.biz.rr.com] has joined #ubuntu === DENI [i=deneb@riesenglied.de] has joined #ubuntu === Lynoure [n=lynoure@lynoure.net] has joined #ubuntu === d0rt [n=d4rt@69.37.255.160] has joined #ubuntu === grepper [n=robert@ip216-239-88-160.vif.net] has joined #ubuntu === lnx [n=lnx@62.112.194.83] has joined #ubuntu === cycom [n=cycom@c-71-235-39-164.hsd1.ct.comcast.net] has joined #ubuntu === kritical [i=kritical@72.20.36.141] has joined #ubuntu === tryggvib [n=tryggvib@cspc00.rhi.hi.is] has joined #ubuntu === ead [n=ead@rrcs-24-199-147-14.midsouth.biz.rr.com] has joined #ubuntu === numist [i=numist@unaffiliated/numist] has joined #ubuntu === Rookie_ [n=ffgfg@c-48dc70d5.05-28-67626710.cust.bredbandsbolaget.se] has joined #ubuntu === rm_you [n=Adam@131.194.234.45] has joined #ubuntu === Peggerr [n=bab@mciuser1.hmco.com] has joined #ubuntu === Aji-Dahaka [n=kjelderg@shell.aero.und.edu] has joined #ubuntu === smurf [n=smurf@debian/developer/smurf] has joined #ubuntu === PHoeNiGoRe [i=phoenigo@staff.sgserv.net] has joined #ubuntu === k31th [n=keith@cartman.nzsolutions.net] has joined #ubuntu === iNiku [n=ntoivola@he.fi] has joined #ubuntu === ozzloy [i=ozzloy@hogwarts.lifeafterking.org] has joined #ubuntu === dennis- [n=dennis@valhalla.lauschmusik.de] has joined #ubuntu === NigelS [i=nigel@xdev.net] has joined #ubuntu === Koffa [i=jkohvakk@koffa.fi] has joined #ubuntu === Etapien [i=darn@72.20.3.66] has joined #ubuntu === Lathiat [n=lathiat@ubuntu/member/pdpc.basic.lathiat] has joined #ubuntu === burzum [n=burzum@ftp.probe-networks.lkams.kernel.org] has joined #ubuntu === dixie [n=dixie@handra.rampa.sk] has joined #ubuntu === deeem [n=space@cm108.epsilon189.maxonline.com.sg] has joined #ubuntu === jpjacobs [n=jpjacobs@ace.ulyssis.student.kuleuven.be] has joined #ubuntu === ntz [i=ilmari@kakkonen.goatse.fi] has joined #ubuntu === SUSaiyan [n=susaiyan@cc84863-b.zwoll1.ov.home.nl] has joined #ubuntu === stig [n=stig@0x5735e1de.kd4nxx12.adsl-dhcp.tele.dk] has joined #ubuntu === Hirvinen [i=patrik@hoas-fe3ddd00-123.dhcp.inet.fi] has joined #ubuntu === KenSentMe [n=KenSentM@a82-92-80-8.adsl.xs4all.nl] has joined #ubuntu === putzel [n=putzel@htibin332-25.bfh.ch] has joined #ubuntu === ChaosFan [i=sithjanu@faui01.informatik.uni-erlangen.de] has joined #ubuntu === caci [i=sk@andariel.informatik.uni-erlangen.de] has joined #ubuntu === Ropechoborra [n=rope@201-212-141-186.cab.prima.net.ar] has joined #ubuntu === ^betul^ [n=anjuna@ip-152-234.sn2.eutelia.it] has joined #ubuntu === SpacePuppy [n=SpacePup@unaffiliated/iidot] has joined #ubuntu === t0h [n=tommi@dsl-lprgw1-fea5de00-78.dhcp.inet.fi] has joined #ubuntu === besonen2____ [n=besonen2@dsl-db.pacinfo.com] has joined #ubuntu === Discipulus [n=disc@unaffiliated/discipulus] has joined #ubuntu === maven [n=maven@70-58-6-126.hlrn.qwest.net] has joined #ubuntu === jansenq [n=jansenq@S0106004063d598be.vs.shawcable.net] has joined #ubuntu === FliesLikeABrick [n=Ryan@about/rpi/rawdor] has joined #ubuntu === dupoll [i=niels-fn@nerdKing.de] has joined #ubuntu === blithe [n=blithe@raider.djblithe.com] has joined #ubuntu === razor1394 [n=razor139@dr34n.s2.gwcore.cisco-systems.se] has joined #ubuntu === zonum [n=zonum@adsl-2-212-81.mia.bellsouth.net] has joined #ubuntu === roe [n=roe@216-164-160-36.c3-0.eas-ubr10.atw-eas.pa.static.cable.rcn.com] has joined #ubuntu === ZorbaTHut [i=tocohl@skynet.pavlovian.net] has joined #ubuntu === ys76 [i=ys76@linoa.etherkiller.de] has joined #ubuntu === nou [i=Chaton@unaffiliated/nou] has joined #ubuntu === kent [n=kent@82.145.136.38] has joined #ubuntu === mumbles-off [i=mumbles@borknet.org] has joined #ubuntu === fdv [i=1988@fire.ifi.uio.no] has joined #ubuntu === bionoid [i=bionoid@down.in.fragglerock.org] has joined #ubuntu === ScottK [n=kitterma@static-72-81-252-22.bltmmd.fios.verizon.net] has joined #ubuntu === _al_ [n=al@176-232.adsl.lpoy.dnainternet.fi] has joined #ubuntu === nalioth [i=nalioth@freenode/staff/ubuntu.member.nalioth] has joined #ubuntu === Konnektion [n=FreeNode@cpe-72-184-167-252.tampabay.res.rr.com] has joined #ubuntu === pinPoint [n=pinPoint@pdpc/supporter/sustaining/pinPoint] has joined #ubuntu === PwcrLinux [n=DS_Staff@unaffiliated/PwcrLinux] has joined #ubuntu === Robert| [n=robert@robertv.adsl.utwente.nl] has joined #ubuntu === piglit [n=piglit@cc104481-a.groni1.gr.home.nl] has joined #ubuntu === eliphas_ [n=eliphas_@host217-41-36-56.in-addr.btopenworld.com] has joined #ubuntu === Wanderer [i=nomad@24-178-96-163.dhcp.stbr.ga.charter.com] has joined #ubuntu === coldfyre_ [n=coldfyre@c-67-161-28-185.hsd1.ca.comcast.net] has joined #ubuntu === r00k [n=r00k@c-68-82-77-242.hsd1.pa.comcast.net] has joined #ubuntu === nym [n=nym@216.218.203.211] has joined #ubuntu === mykilx [i=1000@pool-71-99-150-2.tampfl.dsl-w.verizon.net] has joined #ubuntu === giesen [i=giesen@dirtypackets.net] has joined #ubuntu === young [n=young@S0106000fb05eb613.cg.shawcable.net] has joined #ubuntu === Misnix2 [n=jkr@corona.xs4all.nl] has joined #ubuntu === cmpalmer [n=cmpalmer@pdpc/supporter/student/tarheelcoxn] has joined #ubuntu === mabus [i=mabus@judecca.aculei.net] has joined #ubuntu === Johan666 [n=johan@h8441213242.dsl.speedlinq.nl] has joined #ubuntu === racarter [n=racarter@cpe-68-173-165-67.nyc.res.rr.com] has joined #ubuntu === WildZeck [n=zeck@ax113-3-82-234-26-6.fbx.proxad.net] has joined #ubuntu === alindeman [i=adml@freenode/staff/alindeman] has joined #ubuntu === maxkelley [n=max@unaffiliated/themaximus] has joined #ubuntu === GuBA [n=guba@64.76.50.36] has joined #ubuntu === Byan [i=nullstri@wmcnair-235-161.resnet.mtu.edu] has joined #ubuntu === _TomB [n=tomb@host217-44-6-189.range217-44.btcentralplus.com] has joined #ubuntu === bezibaerchen [i=bez@selar.scimita.de] has joined #ubuntu === Spec [n=dragonco@ubuntu/member/spec] has joined #ubuntu === Schwarzesschaaf [i=hase@193.22.254.101] has joined #ubuntu === jk [n=jochem@jkossen.nl] has joined #ubuntu === maswan [i=maswan@kennedy.acc.umu.se] has joined #ubuntu === TuOki^ [n=helaital@tuomi.oulu.fi] has joined #ubuntu === moreon [n=moreon@gentoo/user/moreon] has joined #ubuntu === osfameron [n=osfamero@www.greenokapi.net] has joined #ubuntu === Jeruvy [n=jeruvy@unaffiliated/jeruvy] has joined #ubuntu === astopy [n=adam@taurus.moosoft.net] has joined #ubuntu === chesty [n=chesty@unconcerned.org] has joined #ubuntu === synth7 [i=synth@cpe-076-182-016-173.carolina.res.rr.com] has joined #ubuntu === sparkleytone [n=abstephe@stephenscorp.com] has joined #ubuntu === Solarion [n=solarion@cruftix.physics.uiowa.edu] has joined #ubuntu === RichiH [i=richih@freenode/staff/richih] has joined #ubuntu === chii [i=chii@freenode/bot/chii] has joined #ubuntu === VHockey86_ [n=VHockey8@cpe-72-226-193-64.rochester.res.rr.com] has joined #ubuntu [08:06] http://ubuntuforums.org/showthread.php?t=296349 [08:06] who has a clue? [08:06] (Reading database ... 20422 files and directories currently installed.) [08:06] Unpacking iptables-dev (from .../iptables-dev_1.3.3-2ubuntu4_i386.deb) ... [08:06] Setting up iptables-dev (1.3.3-2ubuntu4) ... === CarinArr [n=lq@opal.spod.org] has joined #ubuntu [08:06] ; -) === eobanb [i=eoban@iub-vpn-114-46.noc.indiana.edu] has joined #ubuntu [08:06] but there is ! === huXfluX [n=nknwd@devnull.kappa.ro] has left #ubuntu [] === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu === jono_ [i=jono@conference/ubuntuconf/x-9cb7e7ec0d0084e0] has joined #ubuntu [08:06] now, back to my question, if a ./configure is asking for Qt-includes, what package do i need to install? [08:07] why did this just make a bling sound? [08:07] jkimball4: qt-dev but depends on what version you need [08:07] and start flashing? [08:07] del4: probably due to the netsplit === YogSothoth [n=john@lns-bzn-24-82-64-185-252.adsl.proxad.net] has joined #ubuntu === sjoos [n=sjoos@lammers-family.demon.nl] has joined #ubuntu [08:07] <[sYn] > Anyone know how to configure the "hot zones" in beryl.. The corners of the desktop that cause all of the windows to fly onto the screen so you can choose an application ? [08:07] kitche, thanks, i'll check it out [08:07] kitche: i must have installed that wrong version [08:07] lol ok. thanks kitche - hey have you seen the wikitchen yet kitche? [08:08] i have a repeating problem when installing with apt-get, it says: "perl: warning: Please check that your locale settings:" ... how to check for that ? === nUllSkillZ [n=oliver@p54B2D80E.dip.t-dialin.net] has joined #ubuntu [08:08] del4: umm no don't even know what that is since my name is based on Pagan forklore [08:08] Hattori: I had a lot of problems with my X server after upgrading to edgy, I was able to fix it, by sifting through the errors [08:08] ayaa: what do you get from echo $LANG [08:08] jkimball4: yes, have a look at packages matching libqt*dev === DreamThief [n=mathias@dslb-084-058-171-050.pools.arcor-ip.net] has joined #ubuntu === abdusabri [n=eng_abdu@213.212.193.27] has joined #ubuntu [08:09] jkimball4: my main problem at the moment is the internet === IcyT [n=icyt@p3EE3C74D.dip0.t-ipconnect.de] has joined #ubuntu [08:09] jkimball4: want to fix that before =\ === ZeeEyes [n=ZeeEyes@unaffiliated/zeeeyes] has joined #ubuntu === estudiante [n=estudian@201.248.11.143] has joined #ubuntu [08:09] ra [08:09] jkimball4: can't get wireless pci card to work [08:09] i have problems with my wireless broadcom adaptor. It's a 4311 model. I've did all the steps in the wiki pages. Extraced bcmwl5.sys in the /lib/firmware dir , modprobe bcm43xx. The device is there when i do iwconfig. But i can't do anything with it. On boot time, i've get an error message "IRQ0 not found for bcm43xx" [08:09] <-- these guys turn their kitchen into a wiki with strings. hilarious. === Pablo [n=Pablo@144.162.220.43] has joined #ubuntu [08:09] Hattori: are there linux native drivers for it? === emphiboid [n=jircii@202.14-64-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu === emphiboid [n=jircii@202.14-64-87.adsl-dyn.isp.belgacom.be] has left #ubuntu [] === YogSothoth [n=john@lns-bzn-24-82-64-185-252.adsl.proxad.net] has joined #ubuntu === airton [n=airton@200.206.214.56] has joined #ubuntu === St_MPA3b [n=St_MPA3b@client3.pike.net.ru] has joined #ubuntu [08:09] hi, I manage public computers running dapper at my university. One problem we have is users locking their screen, which prevent other users to use the computer... is there a way to only allow users to logout or halt the computer ? [08:10] jkimball4: no, trying with ndiswrapper. that worked before dist-upgrade === _justin420 is now known as justin420 === Lachkater [n=Miranda@xdsl-87-78-155-69.netcologne.de] has joined #ubuntu === Bass [n=Bassetts@cpc2-mapp1-0-0-cust630.nott.cable.ntl.com] has joined #ubuntu [08:10] How to mount floppy disk? sudo mount -t vfat /dev/fd0 /mnt/floppy Dapper returns "device not found" === cappiz [i=cappiz@gw.mainframe.no] has joined #ubuntu === alecjw [n=alec@82.25.192.13] has joined #ubuntu [08:10] Enoxs: try to "echo 'blacklist bcm43xx' | sudo tee -a /etc/modprobe.d/blacklist" === riao [n=riao@krlh-590cc80f.pool.einsundeins.de] has joined #ubuntu [08:10] L1: open it from nautilus ? [08:10] Hattori: I'm not very familiar with ndiswrappers, so I'm afraid my support won't be of use then. [08:10] L1, are you sure fd0 is the right device? [08:10] =\ === lewiz [n=lewiz@noisy.compsoc.man.ac.uk] has joined #ubuntu === Kornos [i=Kornos@86.107.100.157] has joined #ubuntu === Kaja [n=nkaja@bb-81-175-201-136.dsl.phnet.fi] has joined #ubuntu === edarague [n=edarague@200.24.106.36] has joined #ubuntu [08:11] Hi guys. What's the state with the amd64 version of Edgy? Will I be able to get w32codecs, DVD playback, Google Earth, etc. working okay? [08:11] nolimitsoya, /dev/fd is a directory with four subdirectories 0,1,2,3 [08:12] the compiz installation info on the wiki says to run compiz-start the 1st time you use it - using the official ubuntu repositories that binary doesnt get installed, and using one of the repo's on the wiki page wont install compiz-plugins so im a bit stuck, is there some other thing i should be running? === axisys [n=axisys@155.70.141.45] has joined #ubuntu [08:12] Hattori : Thx, i'll try this out before asking another question. Thanks anyway === ZeeEyes [n=ZeeEyes@unaffiliated/zeeeyes] has joined #ubuntu [08:12] what is a netmeeting like app for ubuntu edgy? === xeonmasta [n=xeonmast@81-232-118-143-no18.tbcn.telia.com] has joined #ubuntu [08:12] L1, yes, but are you sure your floppy is 0? is there a floppy in the drive when mounting? === Qwell[] [i=qwell@nat/digium/x-b36ac5ec19fbcab2] has joined #ubuntu === titusfeuer [n=thomas@h081217012201.dyn.cm.kabsi.at] has joined #ubuntu === pvanhoof [n=pvanhoof@d54C0EE14.access.telenet.be] has joined #ubuntu [08:12] !netmeetinng [08:12] Sorry, I don't know anything about netmeetinng - try searching on http://bots.ubuntulinux.nl/factoids.cgi [08:12] !netmeeting === sjoos [n=sjoos@lammers-family.demon.nl] has joined #ubuntu [08:13] Sorry, I don't know anything about netmeeting - try searching on http://bots.ubuntulinux.nl/factoids.cgi [08:13] !meeting [08:13] Sorry, I don't know anything about meeting - try searching on http://bots.ubuntulinux.nl/factoids.cgi === sioux [n=sioux@adsl-190-223.38-151.net24.it] has joined #ubuntu [08:13] !gnomemeeting [08:13] Sorry, I don't know anything about gnomemeeting - try searching on http://bots.ubuntulinux.nl/factoids.cgi === riao [n=riao@krlh-590cc80f.pool.einsundeins.de] has joined #ubuntu [08:13] hmm === Orange_Bud [n=obdo@89.156.160.111] has joined #ubuntu [08:13] hey how can I remove these packages from my system: xorg-driver-fglrx and fglrx-control ? === baastrup [n=baastrup@217.116.239.2] has joined #ubuntu [08:13] is there such a tool like netmeeting ? [08:13] nolimitsoya, There is a floppy in the drive. /dev/fd0 used to be the address of the floppy in other distributions. [08:13] !amd64 [08:13] AMD64 and EMT64 are fully supported architectures on Ubuntu. See http://tinyurl.com/jv6tc for more information. === NET||abuse [n=lukeab@83.71.62.60] has joined #ubuntu === xiongxiong [n=james@daheim.wh29.tu-dresden.de] has joined #ubuntu [08:14] Adnarim: with synaptic or sudo apt-get remove xorg-driver-fglrx fglrx-control [08:14] thx psusi [08:14] Does WINE work on edgy amd64? === _DvP_ [n=David@128.235.102-84.rev.gaoland.net] has joined #ubuntu === kaptengu [n=gurra@c213-100-60-132.swipnet.se] has joined #ubuntu === Turk [n=Emir@unaffiliated/Turk] has left #ubuntu [] [08:14] nolimitsoya, Places/Computer does not show a floppy disk drive [08:15] who use froswire? here it doesn't work === wastrel [n=wastrel@dsl254-127-242.nyc1.dsl.speakeasy.net] has left #ubuntu ["l8r"] === JPohlmann [n=jannis@e176140209.adsl.alicedsl.de] has left #ubuntu ["Leaving"] === MetaMorfoziS [n=sajt@dsl54009EFA.pool.t-online.hu] has joined #ubuntu === epsilon_ [n=gergely@248-169.dyn-fa.pool.ew.hu] has joined #ubuntu [08:15] ekiga [08:15] if i'm at a directory, can i ftp up the whole directory and all subs straight up to a server without ssh access(so i can't extract the tar.gz when it's up) [08:15] that is the pkg [08:15] cool [08:15] !ekiga === epsilon_ comes arriver and loves ubuntu [08:15] ekiga: H.323 and SIP compatible VOIP client. In component main, is optional. Version 2.0.3-0ubuntu3 (edgy), package size 3582 kB, installed size 12568 kB [08:15] So, what's up with gnome+nvidia driver? It's making things like gnome-terminal not load [08:15] how to generate a burning image iso file from a folder ? [08:15] hello looking for a programm simular to kdesu for gnome. I don't want to have stand my user in the sudoer file === mikeconcepts [n=Mike@100.142.33.65.cfl.res.rr.com] has joined #ubuntu [08:16] Zdra: have look at seting up a kiosk machine for public access. the tool that may do the job is kiosktool with the kde desktop aptitude show kiosktool [08:16] ayaa: with mkisofs [08:17] titusfeuer, gksu [08:17] green_earz: we are using GNOME [08:17] where do i add a command i'd like to start when my system boots and not when it logs into gnome? === keithg [n=keithy@c-67-170-164-82.hsd1.or.comcast.net] has joined #ubuntu [08:17] anyone here running beryl or compiz? === infernaljesus [n=infernal@63.136.113.213] has joined #ubuntu === Rossimo [n=rossimo@cu-nat-2.clemson.edu] has joined #ubuntu === ericz [n=eric@ip70-174-127-4.hr.hr.cox.net] has joined #ubuntu [08:17] M0E^lnx, yes [08:18] dnite, man update-rc.d [08:18] thanks === Orange_Bud [n=obdo@89.156.160.111] has left #ubuntu ["Quitte"] === vega- [i=mikko@lotus.puolikuu.net] has joined #ubuntu [08:18] hey how would i play wmvs [08:18] segfault: do you know where I can find a good howto?.... I followed one and dead ended here http://media.blutkind.org/xgl/ [08:18] on ubuntu === sunyata [n=chris@c-24-19-26-184.hsd1.mn.comcast.net] has joined #ubuntu [08:18] what is the default shell now? it is not bash so most scripts dont run well :( [08:18] any play wmvs [08:18] what do you use [08:18] epsilon_: think it's dash [08:18] b0ss_: you need need the win32codecs [08:18] !restrictedformats > b0ss_ === Rossimo [n=rossimo@cu-nat-2.clemson.edu] has left #ubuntu [] [08:19] kitche but why not bash? is it better or what? :S [08:19] M0E^lnx, there was one on ubuntu site in docs, i assume still there, also #ubuntu-xgl may have more info [08:19] ahh ty [08:19] !xgl [08:19] Compiz (compositing window manager) and XGL (X server architecture layered on top of OpenGL) - Howto at http://help.ubuntu.com/community/CompositeManager - Help in #ubuntu-xgl - See http://tinyurl.com/pw5ez for Kubuntu systems [08:19] b0ss_ remember always search the wiki forst for common problems :) === M0E^lnx reads the howto === crashzor [n=crashzor@t-miog.demon.nl] has joined #ubuntu === L1 [n=john@netblock-208-127-45-95.dslextreme.com] has left #ubuntu ["Leaving"] [08:20] is there a easy way of preventing they X server from running a shutdown command [08:20] anywone? why dash is the default shell? why not bash? === ray__ [n=ray@dev.reslife.msu.edu] has joined #ubuntu [08:21] epsilon_: because they like breaking things? :P === brandini [n=brandini@adsl-70-228-104-3.dsl.akrnoh.ameritech.net] has joined #ubuntu [08:21] mm [08:21] epsilon_, iirc the reason was something about autocompletion its very easy to switch back [08:21] epsilon_: cd /bin/ && rm sh && ln -s sh bash === Nakkel [n=nakkel@vektori.com] has joined #ubuntu [08:21] Qwell[] : yes i see... but really if they know that bash scripts wont run... === Pensacola [n=pensacol@196.116-242-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [08:21] segfault, is there a way to 'generate' an init script? or should i just copy one that's already in /etc/init.d/ and edit it? [08:21] thank you! :) [08:21] if your going to run ubuntu on production, what would you recommend? [08:22] for an email server [08:22] dnite, u must make ur own [08:22] was the package name for lib64gcc1 changed in 6.10? [08:22] so sh is a link to shell thanx :) [08:22] where you can easily set up domains, and email accounts [08:22] segfault, ok. thanks.. [08:22] epsilon_: as i understand, the default interactive shell is still bash; dash is used for scripts; it's supposedly *much* faster [08:22] i want to use dspam as spam filtering [08:22] s/faster/less featureful/ [08:22] right now i have fedora 3 with directadmin === sioux [n=sioux@adsl-190-223.38-151.net24.it] has left #ubuntu [] [08:22] roryy yes but it doesnt run every script... it writes syntax errors === hou5ton [n=hou5ton@dsl-183-57.clm.centurytel.net] has joined #ubuntu === iami89 [n=Nguyen@203.162.237.4] has joined #ubuntu === bradley [n=bradley@bas3-montreal02-1096689873.dsl.bell.ca] has joined #ubuntu [08:23] roryy and the same script worx with bash === peacedog [n=chatzill@58.61.42.30] has joined #ubuntu [08:23] epsilon_: then those scripts are probably not posix compliant (or whatever the term is) === MrFatJack [n=MrFatJac@pool-71-240-185-166.dllstx.fios.verizon.net] has joined #ubuntu === marianom [n=marianom@186-51-231-201.fibertel.com.ar] has joined #ubuntu [08:23] epsilon_: indeed. bash has non-standard extensions === marianom [n=marianom@186-51-231-201.fibertel.com.ar] has left #ubuntu [] === chuckyp is now known as g4t3 [08:23] epsilon_: put '#!/bin/bash' instead of '#!/bin/sh' at the top of your scripts === MrFatJack [n=MrFatJac@pool-71-240-185-166.dllstx.fios.verizon.net] has left #ubuntu [] [08:23] could someone that has installed nvidia on dapper point me to a reliable install guide? [08:23] i meant edgy === kitche [n=dragon@pool-70-16-39-100.buff.east.verizon.net] has joined #ubuntu [08:24] what is better exim or postfix? === ezsquirt [n=bowser@vol21-1-82-224-19-51.fbx.proxad.net] has joined #ubuntu [08:24] !firefox [08:24] firefox is the default web-browser on Ubuntu. To install the latest version, see https://help.ubuntu.com/community/FirefoxNewVersion Installing plugins: https://wiki.ubuntu.com/FirefoxPlugins [08:24] is there a way to translate this wikies? [08:24] i want to do that, but is it possible? [08:24] roryy ty insdead they should've doe it... === Metal_Militia [n=ioppo@host-84-222-32-160.cust-adsl.tiscali.it] has joined #ubuntu === DreamThief [n=mathias@dslb-084-058-171-050.pools.arcor-ip.net] has joined #ubuntu [08:24] Need help - For some reason when I add something to sessions/startup programs it isn't saved...Edgy === teicah [n=teicah@dialup-4.159.110.48.Dial1.Chicago1.Level3.net] has joined #ubuntu [08:25] how do i increase memory for SVGA card in vmware === P3L|C4N0 [n=gcamposm@200.121.86.9] has joined #ubuntu [08:25] epsilon_: please report bugs if you find this happening! :-) === b_52Free [n=skimo@adsl196-142-102-217-196.adsl196-12.iam.net.ma] has joined #ubuntu === harmental [n=ricardo@AGrenoble-257-1-78-111.w86-211.abo.wanadoo.fr] has joined #ubuntu === B-Minus [n=sdfdsfds@eu85-10-105-27.adsl.euphonynet.be] has joined #ubuntu === h1st0 [n=histo@adsl-75-36-112-138.dsl.bcvloh.sbcglobal.net] has joined #ubuntu [08:26] can somone tell me what the problem is with that: goldstein@goldstein-laptop:~/Desktop$ sudo ./ati-driver-installer-8.29.6.run --buildpkg Ubuntu/edgy [08:26] sudo: ./ati-driver-installer-8.29.6.run: command not found === aktiwers [n=aktiwers@217.116.239.2] has joined #ubuntu [08:26] whats the best web/gui configuration for setting up virtual hosting, multiple emails, etc? === h1st0 [n=histo@adsl-75-36-112-138.dsl.bcvloh.sbcglobal.net] has left #ubuntu ["Google] === g4t3 is now known as h1st0 [08:26] ISPConfig [08:26] anyone know how to disable the ipv6 support, i have a problem starting proftpd: Starting ftp server: proftpd - IPv6 getaddrinfo 'localhost.localdomain' error: Name or service not known [08:26] Need help - where is the file that holds the information about what programs to startup === bo__bo [n=bobo@dialup-4.160.243.188.Dial1.Cincinnati1.Level3.net] has left #ubuntu [] [08:26] sgorilla80: i would say postfix its well documented === tannerld [n=tanner@adsl-068-209-251-067.sip.asm.bellsouth.net] has joined #ubuntu === yipe [n=yipely@12-218-163-227.client.mchsi.com] has joined #ubuntu [08:26] roryy: ok :) its a limewire script (runlime.sh) "#!/bin/sh"...... [08:26] why does he say command not found? === yipe [n=yipely@12-218-163-227.client.mchsi.com] has left #ubuntu ["requested] === WikinG [n=wiking@81.198.229.203] has joined #ubuntu === dou213_ [n=x@e180226165.adsl.alicedsl.de] has joined #ubuntu [08:26] green_earz: does it have an easy way to set up virtual users? [08:26] sgorilla80, ISPConfig [08:27] roryy yee it worx now... === h1st0 [n=histo@adsl-75-36-112-138.dsl.bcvloh.sbcglobal.net] has joined #ubuntu [08:27] is there not a lib64gcc1 package for 6.10? === Qwell[] [i=qwell@nat/digium/x-8063415a27014b20] has joined #ubuntu [08:27] i followed a wiki attempting to install nvidia on edgy and it didn't work, how do i install it? [08:28] Who decided that shift+backspace restarting X would be a good idea? === Pensacola [n=pensacol@196.116-242-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [08:28] I'd like to give that person a piece of my mine [08:28] what is recommended for running ubuntu on a production server? [08:28] mind too [08:28] dapper drake? === gimmulf [n=gimmulf@unaffiliated/gimmulf] has joined #ubuntu [08:28] :( [08:28] Qwell[] , it isnt === SnakeyeS [n=Snakeyes@wsip-68-111-2-4.rn.hr.cox.net] has joined #ubuntu [08:28] it is for me [08:28] ever since I upgraded === magical_trevsky [n=magical@80-45-41-53.static.dsl.as9105.com] has joined #ubuntu [08:28] Qwell[] , crtl+alt+backspace is kill x === dv_ [n=dv@M1106P016.adsl.highway.telekom.at] has joined #ubuntu [08:28] !info lib64gcc1 [08:28] lib64gcc1: GCC support library (64bit). In component main, is optional. Version 1:4.1.1-13ubuntu5 (edgy), package size 24 kB, installed size 88 kB [08:28] Simply install the mplayer package from the Multiverse repository. === drayenAway [n=drayen@ip-89-168-32-108.cust.homechoice.net] has joined #ubuntu [08:28] From now on I will be known as h1st0 instead of chuckyp. Its like a rebirth. [08:28] so i can install mplayer === strabes [n=strabes@wcnat-50-253.wheaton.edu] has joined #ubuntu [08:28] with sudo apt get [08:28] sgorilla80: the link should give you a pointer > http://workaround.org/articles/ispmail-sarge/ [08:28] the ubuntu site sayd i can === iami89 [n=Nguyen@203.162.237.4] has left #ubuntu [] === BCMM [n=BCMM@cpc3-oxfd1-0-0-cust912.oxfd.cable.ntl.com] has joined #ubuntu === BockBilbo [n=BockBilb@eu85-84-43-70.clientes.euskaltel.es] has joined #ubuntu === fratermisc [n=mcostell@64-132-13-2.static.twtelecom.net] has joined #ubuntu [08:29] Hi, my update manager doesnt seem to upgrade my 6.06 to 6.10 please help, it updated alots of other software though === pascalFR [i=LgtIbT4j@cha92-7-82-230-174-61.fbx.proxad.net] has joined #ubuntu [08:29] Can Ubuntu run from the cd without installing anything? Similar to knoppix? === Psychobudgie [n=klaatu@82-71-44-108.dsl.in-addr.zen.co.uk] has joined #ubuntu [08:29] also been running: sudo apt-get dist-upgrade [08:29] yes [08:29] roryy: so what does that mean? === Sp4rKy [n=maxenced@ubuntu/member/sp4rky] has left #ubuntu [] [08:29] brandini: it means there is one ;) [08:29] green_earz: thanks [08:29] SnakeyeS, the default install CD works as a LiveCD [08:29] SnakeyeS: yes the desktop cd can [08:29] np [08:29] roryy: but apt-get install is saying it couldn't find package [08:29] SnakeyeS, you have to explicitly tell it to install itself, until then, you're running live === Qwell[] [i=qwell@nat/digium/x-0a9a1423a513126d] has joined #ubuntu === david__ [n=david@dmcos.com] has joined #ubuntu [08:30] ... [08:30] seriously...that's getting REALLY OLD [08:30] can somebady can give advice in kernel config if i sent file with system info? [08:30] So I will be asked/promted? [08:30] prompted [08:30] brandini: have you setup your network repositories? === JDahl [n=joachim@3e6b711d.rev.stofanet.dk] has joined #ubuntu [08:30] anyone has any experience installing drm-module for intel graphics 900 on edgy? === tisse [n=tisse@c-120-117-vas-l2.cust.mdfnet.se] has joined #ubuntu [08:30] brandini: also, what architecture are you on? [08:30] roryy: maybe not :) [08:30] has anyone here succesfully setup mythtv on a fresh install of edgy? === tisse [n=tisse@c-120-117-vas-l2.cust.mdfnet.se] has left #ubuntu ["Lmnar"] === P3L|C4N0 [n=gcamposm@200.121.86.9] has joined #ubuntu [08:30] roryy: athlon64 [08:30] dual core === ana [n=ana@80-41-6-64.dynamic.dsl.as9105.com] has joined #ubuntu [08:31] brandini: packages.ubuntu.com can be used to search for packages too === moose5435 [n=turkey@adsl-18-168-88.int.bellsouth.net] has joined #ubuntu === rexbron [n=rexbron@keele-b164-184.airyork.yorku.ca] has joined #ubuntu [08:31] brandini: do you know how to setup your pc to use the network repositories? [08:31] sgorilla80: you can use webmin-mysql for the data base [08:31] Hello. My router causes anything trying to use IPv6 to take a very very long time to resolve domain names (some apps time out before they manage it). Is there a way to fix this for everything? I've got it to stop loading the ipv6 kernel module, but at least Automatix and probably some other programs still have problems resolving addresses (automatix works fine with addresses which are in /etc/hosts btw). [08:31] http://ubuntuforums.org/showthread.php?t=140658 [08:31] hi, having problems installing edgy on a t2000, can't get past disk partitioner [08:31] roryy: not quite [08:31] I mean... I haven't read the docs yet [08:31] !tell brandini about repos === finalbeta [n=finalbet@d5152A68A.access.telenet.be] has joined #ubuntu [08:32] does !tell not work anymore? [08:32] !repos [08:32] The packages in Ubuntu are divided into several sections. See http://www.ubuntu.com/ubuntu/components https://help.ubuntu.com/community/Repositories and !easysource === frajagon [n=frajagon@dinip129.univalle.edu.co] has joined #ubuntu [08:32] roryy: it /msg'd me === Enoxs [n=Enoxs@d51A51A12.access.telenet.be] has joined #ubuntu [08:32] brandini: hrm. according to packages.ubuntu.com, you can only get that for i386 and powerpc anyway [08:33] brandini: do you maybe want lib32gcc1 ? [08:33] why would it.... hmmmmm === sire1 [n=sirex@217.117.18.129] has joined #ubuntu === threete [n=irc@80-41-219-99.dynamic.dsl.as9105.com] has left #ubuntu [] [08:33] didn't there use to be a gui for mounting/umount disks [08:33] where did it go in edgy [08:34] why would I install a lib32 on a 64 bit arch? [08:34] after doing a 64 bit install? === Rumpalisti [n=Rumpalis@dsl-083-102-036-37.lohjanpuhelin.fi] has joined #ubuntu [08:34] brandini: at a guess, so you can run 32 bit apps === frozenflame [n=frozenfl@adsl-18-61-121.mco.bellsouth.net] has joined #ubuntu [08:34] :) [08:34] brandini: why do you want lib64gcc1 ? === Cholito [n=alejandr@87.218.66.37] has joined #ubuntu [08:34] I was following a tutorial for installing vmware and it said to use that one [08:34] oh wells [08:34] anybody know how to add a different display manager to the startup other than kdm? [08:35] I've got an error message with my wireless adaptor on boot time (BCM43xx). can't load IRQ handler??? [08:35] i am not using a complete ubuntu install [08:35] using server [08:35] please? === Spec is now known as lunching === kenny [n=luishhc@201.79.169.71] has joined #ubuntu === Who_ [n=jonny@jma64.clare.cam.ac.uk] has joined #ubuntu === ruda_ [n=ruda@trrdsv-aww.wrk.terra.com.br] has joined #ubuntu [08:36] i installed anjuta IDE with tar.gz file, and now i want to remove but says that anjuta isn't installed [08:36] frozenflame: you could install ubuntu-desktop === Miravlix [i=dragon@arcdraco.net] has joined #ubuntu [08:36] http://ubuntuforums.org/showthread.php?t=296349 [08:36] who has a clue? [08:37] frozenflame: 'sudo aptitude install ubuntu-desktop' -- that should give you gdm === jatt [n=user@p54A3DFD2.dip.t-dialin.net] has joined #ubuntu === unreal [n=unreal@unaffiliated/unreal] has joined #ubuntu === Weed_Man [n=nonuf@189.156.54.144] has joined #ubuntu [08:37] frozenflame: along, obviously, with the whole of the ubuntu gnome desktop [08:37] where is the gui tool for mounting/umounting disks in edgy [08:37] anyone know how to connect to a wireless network with WPA encryption? [08:37] Anyone have got their Broadcom wirless to work in Edgy AMD64 version? [08:37] My dapper to edgy upgrade didn't go so well as planned. useradd now repeats a mremap call using more and more memory === maddler [n=maddler@217-133-171-18.b2b.tiscali.it] has joined #ubuntu === mathrick|away is now known as mathrick [08:38] I have to start a program every day at an hour, how can I do? [08:38] Otacon22, man crontab [08:38] Otacon22: /etc/crontab [08:38] tnx [08:38] roryy: would that give me the option to change the display manager? cause I have dke desktop and it only lets me change the kdm [08:39] I'm gonna kill the Broadcom company === xplic1t [n=xplicit3@xlate-2-24.webster.edu] has joined #ubuntu [08:39] frozenflame: what do you want instead? === satempler [n=satemple@ip68-230-166-108.mc.at.cox.net] has joined #ubuntu === Amaranth [i=travis@conference/ubuntuconf/x-9b28811cdcc3cf01] has joined #ubuntu [08:39] Hattori; i've just tested the command where i put the BCM43 in the blacklist to suspend failure at boot time. It wasn't load when i rebooted, so i did a modprobe bcm43xx, but i've got the same error message. Siocsflags ....or something like that? [08:39] roryy: entrance from e17 === MugginsM [n=jennyj@69.55.232.10] has joined #ubuntu [08:39] !grub [08:39] Otacon22: http://linux.about.com/od/commands/l/blcmdl5_crontab.htm http://www.adminschoice.com/docs/crontab.htm [08:39] grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto [08:39] !grub edgy [08:39] grub: GRand Unified Bootloader. In component main, is optional. Version 0.97-11ubuntu14 (edgy), package size 359 kB, installed size 764 kB === omar_ [n=omar@81-178-123-24.dsl.pipex.com] has joined #ubuntu [08:39] !grub dapper [08:40] grub: GRand Unified Bootloader. In component main, is optional. Version 0.97-1ubuntu9 (dapper), package size 353 kB, installed size 748 kB === jackrazz [n=jackrazz@209-144-236-189-dyndsl.oplink.net] has joined #ubuntu [08:40] frozenflame: i see only e16 (`enlightenment') in the repos... ? [08:40] but I'm trying to find a way that i could input a script into the boot process that would load entrnce [08:40] roryy: yup its e17 is still in heave dev === mheath[laptop] _ [i=mheath@c-67-182-231-23.hsd1.ut.comcast.net] has joined #ubuntu [08:40] frozenflame, what do you want to do know? === cpw [n=chris@gentoo/developer/ChrisWhite] has joined #ubuntu === brainiac [n=brainiac@xdsl-87-78-155-53.netcologne.de] has joined #ubuntu [08:41] kann mann hier deutsch schreiben [08:41] h1st0: have entrance as a display manager [08:41] frozenflame: hrm, sorry, i'm not sure. kdm must have docs somewhere, but I'm not that familiar with it [08:41] frozenflame, ahh [08:41] !de [08:41] Deutschsprachige Hilfe fuer Probleme mit Ubuntu, Kubuntu und Edubuntu finden Sie in den Kanaelen #ubuntu-de, #kubuntu-de, #xubuntu-de und #edubuntu-de [08:41] help please how [08:41] UDSEntryList&)] new entries for file:///home/omar/Desktop/games [08:41] kio (KDirListerCache): [void KDirListerCache::slotResult(KIO::Job*)] finished listing file:///home/omar/Desktop/games [08:41] KCrash: crashing... crashRecursionCounter = 2 [08:41] KCrash: Application Name = k3b path = pid = 6983 [08:41] can I help please how can I burn a CD? [08:41] frozenflame, just need to add it to the availible sesions in gdm [08:41] I have tried K3B but it crashes === engwnbie [n=engwnbie@74.12.40.189] has joined #ubuntu [08:41] just after I click the "burn" button [08:42] h1st0: i don;t have gd, [08:42] h1st0: gdm* === fribuntu [n=fritz@xdsl-87-79-218-22.netcologne.de] has joined #ubuntu [08:42] omar_, what are you trying to burn? === rpedro [n=rpedro@87-196-76-177.net.novis.pt] has joined #ubuntu === turgon [n=turgon@VA1-1E-u-0687.mc.onolab.com] has joined #ubuntu [08:42] frozenflame, what do you have? === stylus [n=stylus@unaffiliated/stylus] has joined #ubuntu [08:42] just a simple movie file [08:43] .mpg [08:43] omar_, just use nautilus to burn it. [08:43] I sucessfully [08:43] UDSEntryList&)] new entries for file:///home/omar/Desktop/games [08:43] kio (KDirListerCache): [void KDirListerCache::slotResult(KIO::Job*)] finished listing file:///home/omar/Desktop/games [08:43] KCrash: crashing... crashRecursionCounter = 2 [08:43] KCrash: Application Name = k3b path = pid = 6983 [08:43] omar_, Places > CD/DVD creater [08:43] sorry that is my sensitive touchpad [08:43] roryy: geez! DL limewire rpm, alien, dpkg, edit runlime.sh, edit /usr/bin/limewire..... === kung [n=kung@dslb-084-058-209-169.pools.arcor-ip.net] has joined #ubuntu [08:43] Anyone have got their Broadcom card working in Edgy amd64 ? [08:43] !wifi > Weed_Man === risca [n=risca@kdlk1-4.onlink.net] has joined #ubuntu [08:44] h1st0: I have no dm, i used to run kdm, however kdm doesn't let me change to a different dm [08:44] omar_ you can put error messages to the pastebin for better readibility === comX [n=uranus@e182034098.adsl.alicedsl.de] has joined #ubuntu === YBH_1 [n=YBH_1@c-24-21-24-238.hsd1.or.comcast.net] has joined #ubuntu === comX [n=uranus@e182034098.adsl.alicedsl.de] has left #ubuntu ["Verlassend"] [08:44] Weed_man: i didn't. I have an AMD64 [08:44] frozenflame, hrm... so you just want to invoke whatever with startx? [08:44] yes sorry I didnt mean to do that, but the touchpad of my laptop is VERY sensitive in Linux in some way [08:44] frozenflame, google is your friend [08:44] and II dont know how to modify it in Ubuntu [08:45] omar_, did you try just using nautilus to burn your cd? or are you trying to make a dvd? [08:45] h1st0: thanks for the link, I have read that one and 100 more, the problem still remains [08:45] Weed_Man, well have you tried ndiswrapper? [08:45] I even tried to upgrade the kernel to the 2.6.18.2 one, still same problem [08:45] Hi all [08:45] CD === eglantine [n=esion@ron34-1-82-224-148-91.fbx.proxad.net] has joined #ubuntu === flo-_- [n=flo@host109-146.pool8250.interbusiness.it] has joined #ubuntu [08:45] just burn a simple CD with 1 simple file [08:46] h1st0: hmm, nah, I want entrance to load instead of a normal consolo login [08:46] h1st0: yeah it works even less than the bcm43xx [08:46] omar_, yeah just Places > CD/DVD creator look ^^^^^^^^ === wolfgang [n=wolfgang@p54A76A85.dip.t-dialin.net] has joined #ubuntu === eglantine_ [n=esion@ron34-1-82-224-148-91.fbx.proxad.net] has joined #ubuntu [08:46] I tried in K3B but as soon as I clicked the "burn" button it crashed and showed me the kcrash screen [08:46] Has anyone else realized that the newly split-up "glibc-doc" and "glibc-doc-reference" do conflict and cannot both be installed at the same time? [08:46] now I am doing it with CD/DVD creator [08:46] the ndiswrapper 1.8 is totally buggy, the 1.28 loads but I can't assign any essid to the card or anything else === caminomaster [n=caminoma@201.244.215.187] has joined #ubuntu [08:46] and it seems to be working === eglantine_ [n=esion@ron34-1-82-224-148-91.fbx.proxad.net] has left #ubuntu ["mouarf"] === wolfgang [n=wolfgang@p54A76A85.dip.t-dialin.net] has joined #ubuntu [08:46] hi [08:47] where can I find a howto or guide 2 install soundcard? [08:47] d00d, I'm hating linux right now [08:47] Weed_Man, hrm.. I haven't had to many problems with ndiswrapper with my broadcomm. As long as you use the drivers that are linked on the ndiswrapper "list" [08:47] !info mcedit [08:47] Package mcedit does not exist in any distro I know [08:47] !sound > caminomaster [08:47] hey everyone, i'm looking for a tray app like alltray for ubuntu...any suggestions? [08:47] !info mc === timruff [n=tim@gra94-4-82-225-41-224.fbx.proxad.net] has joined #ubuntu === croppa [i=user101@135.27.233.220.exetel.com.au] has joined #ubuntu [08:47] mc: midnight commander - a powerful file manager. In component universe, is optional. Version 1:4.6.1-5 (edgy), package size 2057 kB, installed size 5944 kB === adnans [n=adnans@linuxgoeroe.demon.nl] has joined #ubuntu [08:47] I need help with WPA on linux... [08:47] can anyone help? [08:47] !wifi > infernaljesus [08:47] something that minimizes to my tray in the top right corner instead of below. [08:48] !wpa > infernaljesus === phaedrus44 [n=phaedrus@rrcs-24-97-54-186.nys.biz.rr.com] has joined #ubuntu [08:48] h1st0, My alsa is good; I want 2 install a new card === Gwaihir [n=Gwaihir@ppp-89-73.25-151.libero.it] has joined #ubuntu === MrFatJack [n=MrFatJac@pool-71-240-185-166.dllstx.fios.verizon.net] has joined #ubuntu [08:48] h1st0: I assume you doesn't run AMD64 version? I think the problem is related to 64 bit somehow [08:48] caminomaster, help.ubuntu.com has links on getting sound working. [08:48] infernalfesus, check out automatix...I think it does wma [08:49] Weed_Man, you are correct I do not. Most likely that is the case. [08:49] jackrazz, please dont' recomend automatix [08:49] infernaljesus, automatix is the devil [08:49] !wpa [08:49] Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs [08:49] ok h1st, why?? [08:49] h1st0, automatix? === Salah [n=Salah@217-11-225.0505.adsl.tele2.no] has joined #ubuntu [08:50] oh hell [08:50] I think the problem with the new laptops AMD64 based is the PCI-e bus. Maybe kernel 2.6.19 will bring a solution [08:50] h1st0, how about easyubuntu...is that recommended for wma? [08:50] where is a list of all the packages for ubuntu 6.10? [08:50] infernaljesus, its a hacked up program to install stuff in ubuntu and it does it in a vary bad way. [08:50] jackrazz, neither is recomended usually in here due to the breakage that will insue. [08:50] h1st0, is that still true? === St_MPA3b [n=St_MPA3b@client3.pike.net.ru] has joined #ubuntu [08:50] brandini, packages.ubuntu.com === guillote_GNU [n=BrainDoo@host222.200-117-49.telecom.net.ar] has joined #ubuntu [08:50] h1st0, I never used automatix... [08:50] ok, fair enough..I thought those problems were solved with automatix2 [08:51] jackrazz, it will always be true as long as they are installing from source the wrong way and using unsupported stuff. [08:51] jackrazz, I dunno I just know no one will support it in here. [08:51] !automatix | jackrazz [08:51] jackrazz: automatix is a script that tries to install some software, and often fails and breaks systems. We don't provide support for it, and we strongly discourage its use. [08:51] ok, I guess it depends on whats installed as a lot is installed via debian === ragedragon [n=dragon@lns-bzn-58-82-251-235-30.adsl.proxad.net] has joined #ubuntu === g333k [n=g333k@190.40.20.83] has joined #ubuntu [08:51] more specifically aptitude === user-land [n=user-lan@217-162-168-80.dclient.hispeed.ch] has joined #ubuntu [08:52] jackrazz, its just a crappy way of doing stuff that is already easy. [08:52] what software is used for syncing ppc's [08:52] ok, fair enough === unimatrix9 [n=leslie@a62-251-25-103.adsl.xs4all.nl] has joined #ubuntu [08:52] hi there [08:52] how can i create an waste bin on the desktop? === m`kay [n=mkay@p54AB76EB.dip.t-dialin.net] has joined #ubuntu [08:52] anyone use a tray app to minimize apps to the top right corner of gnome desktop? [08:53] oh and invernaljesus. sorry about that === caplink811-log [n=caplink8@dslb-088-073-008-053.pools.arcor-ip.net] has joined #ubuntu [08:53] unimatrix9, gconf-editor then apps > nautilus > desktop [08:53] jackrazz, like a systray? === vavincavent [n=vavincav@136.7.101-84.rev.gaoland.net] has joined #ubuntu [08:53] thnx, i will look into that [08:53] yes h1st [08:53] I want one to remember which apps to minimize that way === spg76 [n=sebastia@201.216.212.229] has joined #ubuntu [08:53] hi guys. i have installed "ubuntu-desktop" because i want to test gnome.how can i deinstall the package ubuntu-desktop with all dependencies [08:54] alltray does it...I'm looking for choices === spg76 [n=sebastia@201.216.212.229] has left #ubuntu [] === rexbron [n=rexbron@keele-b164-184.airyork.yorku.ca] has joined #ubuntu === knubbe- [n=knubbe@h123n4c1o1036.bredband.skanova.com] has joined #ubuntu [08:54] jackrazz, well you can right click and add dthe notification area most apps go up there. hrm.. or you could modify the window list applet. === ubutom [n=tom@p54A69C0A.dip0.t-ipconnect.de] has joined #ubuntu === gnomeguy [n=gnomeguy@pool-72-95-7-35.hrbgpa.east.verizon.net] has joined #ubuntu [08:54] m'kay, get out of the gnome environment, then apt-get remove ubuntu-desktop [08:55] h1st, I don't see that for thunderbird [08:55] right click minimized icon at the bottom? [08:56] hum, modify the window list applet [08:56] thats a tray app right? === holycow [n=a@mail.wjsgroup.com] has joined #ubuntu === Metal_Militia [n=ioppo@host-84-222-34-113.cust-adsl.tiscali.it] has joined #ubuntu === moo__ [n=moo@85-210-141-87.dsl.pipex.com] has joined #ubuntu [08:57] jackrazz: this delete just the metapackage [08:57] h1st, can I control what's put in the window list ? [08:58] it worked [08:58] hurray === caplink811-log is now known as caplink811_log [08:58] one more point for GNOME-ubuntu and one les for KDE-KUBUNTU [08:58] how can I disable that my computer goes to hibernate when I press the 'sleep' key on my keyboard? gnome-keyboard-preferences doesnt help [08:58] mkay, sorry are you talking about apt-get remove? [08:58] So no one has a clue about why a dapper _> edgy upgrade causes useradd to break? === MarcN [n=marc@dslv-1-139.mv.com] has joined #ubuntu === lux` [n=lux@host-84-222-130-200.cust-adsl.tiscali.it] has joined #ubuntu [08:59] I was going to upgrade to edgy from 6.06 === wycvpdxmk [i=deeps@81.94.17.106] has joined #ubuntu [08:59] jackrazz: yes, apt-get remove ubuntu-desktop removes just the metapackage not the dependencies === rob [i=RobertSt@freenode/staff/rob] has joined #ubuntu [08:59] but from all the posts I have read and the ubuntuforums poll and all the blogs [08:59] I preffered to stay [08:59] as they say if it aint broken [09:00] Ubuntu 6.06 "kind of" works on my cmp [09:00] mkay, I could easily be wrong, but if apt-get install was used, then remove should get it [09:00] my BCM wirless drivers dont work === Pluk [n=Pluk@11-68-dsl.ipact.nl] has joined #ubuntu [09:00] and there are other problems but welll.. thats how linux "works" [09:00] Omar: Welcome to the club..... === funkyHat [n=matt@cpc7-nthc3-0-0-cust812.nrth.cable.ntl.com] has joined #ubuntu [09:01] mkay checking [09:01] also, my hibernate-suspend funciton does not work [09:01] and mmm [09:01] ubuntu-desktop is just a meta package doesn't really have dependencies like that. [09:01] there are countless of detailes [09:01] details === Pensacola [n=pensacol@196.116-242-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu === eXistenZ [i=eXistenZ@unaffiliated/eXistenZ] has joined #ubuntu [09:01] mkay, check deborphan & gtkorphan packages [09:01] omar_, not really I don't have any problems here. [09:01] but I just removed windows XP completely beause the bastard said my copy was pirated [09:01] im back in a few minutes === m`kay [n=mkay@p54AB76EB.dip.t-dialin.net] has left #ubuntu ["Kopete] === Miravlix [i=dragon@arcdraco.net] has left #ubuntu [] [09:02] and you can believe me, it is HARD to have a pirated copy of WinXP if it came bundled with your HP laptop =oP [09:02] specially if you bought it from HP [09:02] how do i add shortcuts in the applications menu in gnome? [09:02] and have a sticker under it [09:02] but WTF [09:02] it pissed me off [09:02] http://www.psychocats.net/ubuntu/aptitude [09:02] and hey, I have always wanted to migrate "completely" to Linux at home (already use FC5 at work) [09:02] mkay check this link === axisys [n=axisys@155.70.141.45] has left #ubuntu [] === [Jonne] _ [n=chatzill@102.19-201-80.adsl-dyn.isp.belgacom.be] has joined #ubuntu === pianoboy3333 [n=alex@ool-43567d61.dyn.optonline.net] has joined #ubuntu === cherubiel [n=cherubie@unaffiliated/cherubiel] has joined #ubuntu [09:03] Tjoels: right click on the applications menu, click edit menus, then in the window that pops up you can hit new item i believe [09:03] omar_, So what sort of problems are you having? === david__ [n=david@ip247-10.ct.co.cr] has joined #ubuntu [09:03] strabes: thx === mikeconcepts [n=Mike@100.142.33.65.cfl.res.rr.com] has joined #ubuntu [09:03] i have to go..cya === markus_ [n=markus@h67n2c1o986.bredband.skanova.com] has joined #ubuntu === somervil [n=somervil@21.crcr3.xdsl.nauticom.net] has joined #ubuntu === darius_ [n=darius@integrity.bourg.net] has left #ubuntu [] === gnomefreak [n=gnomefre@ubuntu/member/gnomefreak] has joined #ubuntu === Eystein [n=thomas@81.56.27.16] has joined #ubuntu === FireBlade [i=fire@da-box.net] has joined #ubuntu === jk_ [n=jochem@jkossen.nl] has joined #Ubuntu [09:04] hey, Edgy is behind in a package I need, but Etch has it.... is it safe to add etch repository listings in my sources.list ? === sigger [i=Sigger@pool-68-162-8-54.nwrk.east.verizon.net] has left #ubuntu [] [09:05] does anyone know if there's an 6.10 desktop live CD out? === pecisk [n=pecisk@purvc-44-54.maksinets.lv] has joined #ubuntu [09:05] FireBlade: there is.. === vishah [n=vishah@61.246.60.19] has joined #ubuntu [09:05] Etch, the new ubuntu version? [09:05] FireBlade: the install cd is a live cd === syl_ [n=damn@85.236.161.66] has joined #ubuntu [09:05] MarcN: excellent thanks === flex_ [n=flex@h113n6c1o1114.bredband.skanova.com] has joined #ubuntu === m3s3riasu [n=m3s3rias@89.136.226.159] has joined #ubuntu [09:06] Etch is Debian unstable [09:06] or testing or something [09:06] hai sal ma [09:06] ok ;) [09:06] saxin: Etch is a Debian release. Edgy Eft is the current Ubuntu version. Feisty Fawn is the next === Tron [n=tron@adsl-218-140-218.jax.bellsouth.net] has joined #ubuntu [09:06] somervil: I had a similar situation, just downloaded the deb from etch and installed it on edgy [09:06] FireBlade, yes === ruda_ [n=ruda@trrdsv-aww.wrk.terra.com.br] has left #ubuntu ["Ex-Chat"] === syl_ [n=damn@85.236.161.66] has left #ubuntu ["Konversation] === ryu [n=chris@unaffiliated/ryu] has joined #ubuntu [09:07] FireBlade, all desktop install cds are live cds [09:07] MarcN: is that safe ? [09:07] bimberi: Feisty Fawn, nice name :-) [09:07] somervil: what app? [09:07] when i try to play some media files (not sure which ones) in firefox, i get an error " Totem could not play 'fd://O'. There is no plugin to handle this movie" anyone knwo what the hell is going on with that? [09:07] saxin: I'm sure Mark Shuttlworth would thank you :) === f4bien [n=fabien@host145-127.pool8252.interbusiness.it] has joined #ubuntu [09:07] *know [09:07] libopenscenegraph4 (1.2) [09:07] i'm in edgy btw [09:07] !codecs > Blue-Omega [09:07] somervil: probably depends on the app. I had a perl package (mediawiki-perl or such) that was in etch, but not in edgy. Had to manually deal with deps. [09:07] !codecs > bluefox83 [09:08] ubuntus so easy once u get to know cuple commands === tockotock [n=h@p85.212.200.102.tisdip.tiscali.de] has joined #ubuntu [09:08] Blue-Omega, sry wrong person === g8m [n=evil@cp82868-a.dbsch1.nb.home.nl] has joined #ubuntu === b0ss_ [n=b0ss@ool-18b8d1ca.dyn.optonline.net] has left #ubuntu ["Konversation] [09:08] gnomefreak: libopenscenegraph4-dev actually [09:08] somervil: are you sure thats the app not the lib? === overridex [n=override@c-24-62-7-132.hsd1.ma.comcast.net] has joined #ubuntu [09:08] gnomefreak: I want the lib [09:08] somervil: are you building it? === FlyingSquirrel32 [n=jared@exchange2.dglaw.com] has joined #ubuntu === petue [n=petue@200.69.165.249] has joined #ubuntu [09:08] no, I wanted to get it via apt [09:09] somervil: you can try to get it from etch but no promise it will work. [09:09] anyone know of a decent program in ubuntu that can arrange pictures to print out a few at different sizes on 1 piece of printer paper? (i.e. to take a few images and make some 6"x4", etc.) [09:09] anyone how to solve this? http://paste.ubuntu-nl.org/30764/plain/ [09:09] somervil: its a lib and may depen on others that ubuntu might not have [09:09] somervil: that packages doesn't depend on anything else. give it a try. [09:09] gnomefreak: is is ok to add etch lines to my sources.list ? === krompi [n=krompi@e177152070.adsl.alicedsl.de] has joined #ubuntu === vincent_ [n=vincent@pra13-1-82-66-188-49.fbx.proxad.net] has joined #ubuntu [09:09] somervil: no [09:09] or should I download the debs individually [09:09] ok [09:09] download them === kaptengu [n=gurra@c213-100-60-132.swipnet.se] has joined #ubuntu [09:10] I can't write on a floppy disc, but I can delete the files on it :| [09:11] could I get some help setting up an init script? It's not returning after I do /etc/init.d/syslog2mysql start === pianoboy3333 [n=alex@ool-43567d61.dyn.optonline.net] has joined #ubuntu === Rondom [n=Rondom@p54AEDD14.dip.t-dialin.net] has joined #ubuntu [09:12] the service is run manually thus: syslog2mysql & [09:12] FlyingSquirrel32: debug by running it like this from the command line. sh - x /etc/init.d/syslog2mysql start [09:12] and you'll see the commands as executed. likely you start a daemon but forget to spawn it off. === youser [n=owner@206.191.91.86] has joined #ubuntu [09:13] anyoe know why when i run my iptables firewall it slows down my internet connection ? [09:13] yeah, i just created a link to the script in /etc/init.d/ and did update-rc.d syslog2mysql default 99 [09:13] things that i normally sig on to or load webpages take forever instead of seconds [09:13] FlyingSquirrel32: your code? you may want to start it like this: (nohup syslog2mysql &) perhaps redirecting stdio, stderr === Lattyware [n=Latty@host86-141-176-137.range86-141.btcentralplus.com] has joined #ubuntu === cbgb [n=chris@p549FD80C.dip.t-dialin.net] has joined #ubuntu [09:14] youser: because it it checking every in/out packet? Overly complex iptables? === lunching is now known as Spec [09:14] hi *, anyone experience on setting up infrared? [09:14] not really [09:14] i used a default config frodon made on ubuntuforums === the-mr-freak [n=chris@pD9E0B8A7.dip.t-dialin.net] has joined #ubuntu [09:15] youser: ptr? === macphil [n=macphil@217-68-176-111.dynamic.primacom.net] has joined #ubuntu [09:15] ptr? [09:15] youser: pointer to the URL? === Enoxs [n=Enoxs@d51A51A12.access.telenet.be] has left #ubuntu ["Ik] [09:15] http://ubuntuforums.org/showthread.php?t=159661 === petue [n=petue@200.69.165.249] has left #ubuntu ["Ex-Chat"] === salkot [n=andrew@c-24-13-96-4.hsd1.il.comcast.net] has joined #ubuntu [09:15] MarcN: do I need to create a new script to put in /etc/init.d/ and run the main script from there, or can I just create a link to the main script itself as i mentioned above === rand [n=ricardo@87.196.255.186] has joined #ubuntu === rand [n=ricardo@87.196.255.186] has joined #ubuntu === abdusabri [n=eng_abdu@213.212.193.27] has left #ubuntu [] === ninnghizidha [n=ninn@chello084112032164.1.11.vie.surfer.at] has joined #ubuntu [09:16] gnomefreak, MarcN, Thanks. === caminomaster [n=caminoma@201.244.215.187] has left #ubuntu ["CMaster.exe] === ogra [i=ogra@ubuntu/member/ogra] has joined #ubuntu [09:17] MarcN: by "main script" i mean the syslog2mysql. Note: if I run this like this syslog2mysql & === frying_fish [n=frying_f@AC9FF527.ipt.aol.com] has joined #ubuntu === steppenwolf [n=mrlobo@120.Red-83-32-77.dynamicIP.rima-tde.net] has joined #ubuntu === petue [n=petue@200.69.165.249] has joined #ubuntu === tockotock [n=h@p85.212.200.102.tisdip.tiscali.de] has left #ubuntu ["...] === Caplain__ [n=matt@62.detroit-09-10rs.mi.dial-access.att.net] has joined #ubuntu === luis [n=luis@host219-186-dynamic.15-87-r.retail.telecomitalia.it] has joined #ubuntu === dredd [n=dredd@host86-134-212-91.range86-134.btcentralplus.com] has joined #ubuntu === madewokherd [n=urk@VRP5000.rhbd.psu.edu] has joined #ubuntu [09:19] hi, is there a way to install older packages of something? [09:19] MarcN: no it's not my code, it's part of phpsyslogng it imports syslog data into mysql [09:20] i need version 8.20.10 of the ati fglrx driver, the new one has a bug that won't let me use xv on the tvout === PimpNova [n=fhaborn@c83-250-112-194.bredband.comhem.se] has joined #ubuntu === satempler [n=satemple@ip68-230-166-108.mc.at.cox.net] has joined #ubuntu [09:21] anyone? http://paste.ubuntu-nl.org/30764/plain/ === Metal_Militia [n=ioppo@host-84-222-35-113.cust-adsl.tiscali.it] has joined #ubuntu === fistfullofroses [n=fistfull@68-170-168-41.atlaga.adelphia.net] has joined #ubuntu === knubbe--- [n=knubbe@h113n1c1o1036.bredband.skanova.com] has joined #ubuntu === boggle [n=spindler@modemcable057.248-203-24.mc.videotron.ca] has joined #ubuntu === jk_ is now known as jk === VHockey86_ is now known as VHockey86 [09:22] anyone know if that's possible? === jono [i=jono@conference/ubuntuconf/x-d549b28e91fd45e7] has joined #ubuntu [09:23] well, I don't know if there's and easier way, but couldn't you download the source for the version you want and compile and install it? === fabbione [n=fabbione@vpn-nat.fabbione.net] has joined #ubuntu === jkimball4 [n=jerrid@wsip-70-165-105-41.om.om.cox.net] has joined #ubuntu === ashes_ [n=ashes@85.187.38.45] has joined #ubuntu [09:24] Is anyone here using Xubuntu 6.10 32bit on a 64bit processor? === ashes_ [n=ashes@85.187.38.45] has left #ubuntu ["Leaving"] === owrflow_ [n=ubuntu@0x535b6fd3.esnxx3.adsl-dhcp.tele.dk] has joined #ubuntu [09:24] FlyingSquirrel32: mmm, yeah i thought i'd give that a go, but ATI seems to have puled the drivers from its site, and the only instructions i could find (new to ubuntu) tried to get them from there === noxs [n=noxs@dslb-084-056-231-048.pools.arcor-ip.net] has joined #ubuntu [09:25] FlyingSquirrel32: i was wondering if there was some sort of repository that might have older versions... === ro1 [n=ron@port0034-afo-adsl.cwjamaica.com] has left #Ubuntu [] === turgon [n=turgon@VA1-1E-u-0687.mc.onolab.com] has left #ubuntu [] [09:25] dredd, /var/cache/apt/archives === ana [n=ana@80-43-76-36.dynamic.dsl.as9105.com] has joined #ubuntu [09:25] instructions for ATI aare here : http://wiki.cchtml.com/index.php/Ubuntu_Dapper_Installation_Guide#Method_1:_Installing_Dapper.27s_Included_Driver_.288.25.18.29 === X-Hacker [n=Adi@dialup.212-50-178-54.karoo.KCOM.COM] has joined #ubuntu === Salah_ [n=Salah@193.216.30.75] has joined #ubuntu === luis [n=luis@host219-186-dynamic.15-87-r.retail.telecomitalia.it] has left #ubuntu ["Leaving"] === jtreglos [n=chatzill@14.244.100-84.rev.gaoland.net] has joined #ubuntu === Crankymonky [n=dean@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu [09:27] hi [09:27] h1st0: this is a new install, i've never had <8.28 installed === lotusleaf [n=lotuslea@kernel-panic/member/carne.asada.burrito] has joined #uBUNtu [09:27] The alacarte menu editor was removed from the menu in edgy? [09:27] dredd, hrm.. possibly google for a .deb or ask around on the forums if someone has it laying around maybel. [09:27] Crankymonky: System->Preferences->Menu Layout [09:28] Amaranth: Thanks === firefoxman [n=chatzill@pool-71-163-140-31.washdc.fios.verizon.net] has joined #ubuntu [09:28] fistfullofroses: yeah, i follwed that. xv works, but drivers above 8.20.10 have a bug in the tvout part that crops video (you get the top 2/3 of the pic) if using xv. xshm is a no-go as the framerate is low === firefoxman [n=chatzill@pool-71-163-140-31.washdc.fios.verizon.net] has left #ubuntu [] [09:28] help with playing movie files. I can't view any video in firefox now, and troubleshooting the problem i found i can play wmv files with the command "mplayer" but not with "gmplayer" [09:28] I have a problem with my Mysql server droping on ubuntu 6.10 server... And I can't have it restart [09:28] I get the error: Error opening/initializing the selected video_out (-vo) device. [09:28] little help? === Blacken [n=ed@edward-ropple.um.maine.edu] has joined #ubuntu === Japsu [i=japsu@unaffiliated/japsu] has left #ubuntu [] [09:29] (same goes for realmedia files) [09:29] h1st0: thanks, i'll put a post in the forum :) === jhawk [n=jhawk@c-68-59-54-75.hsd1.fl.comcast.net] has joined #ubuntu [09:29] doing /etc/init.d/mysql restart or start will give me an error about mysqld not reachable === jhawk [n=jhawk@c-68-59-54-75.hsd1.fl.comcast.net] has left #ubuntu ["Leaving"] [09:30] fistfullofroses: seems i can't pm you :( i'm not registered === coz_ [n=coz_@pool-70-17-176-216.pitt.east.verizon.net] has joined #ubuntu === coz_ [n=coz_@pool-70-17-176-216.pitt.east.verizon.net] has left #ubuntu ["Leaving"] === nUllSkillZ [n=oliver@p54B2DDFC.dip.t-dialin.net] has joined #ubuntu === pcgigabyte [n=pc@74.128.160.224] has joined #ubuntu [09:32] the_machine : apt-get install mozilla-mplayer [09:32] it's installed. [09:32] i get (no video) on everything. === Scunizi [n=Scunizi@ip72-197-239-49.sd.sd.cox.net] has joined #ubuntu [09:32] :( === adm [n=adm@unaffiliated/adm] has joined #ubuntu [09:32] in irssi, I want use alt+driections to navigate between the channels(this works in putty from windos) but it doesnt in the ubntu termianl (gnome-terminal?) [09:32] fistfullofroses: also, i cant play them outside of my browser as well [09:32] are you using 32bit or 64bit? [09:32] 32 === kaptengu [n=gurra@c213-100-60-132.swipnet.se] has joined #ubuntu [09:32] did you download all of your codecs? [09:32] hmm, anybody know with what aplication I kan unpack rar-archives ? === kro [n=user@pool-72-84-47-44.clrkwv.east.verizon.net] has joined #ubuntu [09:32] Could someone help me. I install parallels workstation. NOw when I start it I get Error writing to sound device. Can someone help me? === joachim-n [n=joachim@AC8E3260.ipt.aol.com] has joined #ubuntu [09:33] draconius: unrar [09:33] dreamer: * === nixternal [n=nixterna@71.194.189.213] has joined #ubuntu [09:33] i did download w32codecs [09:33] but i know others who haven't and it still plays for them [09:33] hmm, I can't install unrar with apt-get .. but afaik I have all repo's active .. === zandaa [n=ubuntu@84-105-215-153.cable.quicknet.nl] has joined #ubuntu [09:34] check packages.ubuntu.com [09:34] Could someone help me? === nixternal [n=nixterna@ubuntu/member/nixternal] has joined #ubuntu [09:34] did you install mplayer standalone? you may also want to try xine-ui and/or realplayer/helix and maybe also try beep-media-player those come with alot of codecs and whatnot that have no dependencies === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu [09:35] NChief: I need unrar-free [09:35] hmm [09:35] can anyone help me? I've tried to make my grub graphical like SuSe's grub is using a howto posted on the ubuntuforums, yet it has corrupted my boot-sector... [09:35] okay, totally confirmed: WMV, RM, MOV, ETC do not play when i use the gmplayer from the shell.. but if i use mplayer they DO [09:35] little help!?! === zspada15 [n=kvirc@unaffiliated/zspada15] has joined #ubuntu === Skal [n=skal@ADijon-258-1-49-90.w90-6.abo.wanadoo.fr] has joined #ubuntu === abdusabri [n=eng_abdu@213.212.193.27] has joined #ubuntu === MetaMorfoziS [n=sajt@3e44b654.adsl.enternet.hu] has joined #ubuntu [09:37] NChief: Extracting lost.303.hdtv-lol.avi Failed [09:38] !spca5xxx [09:38] !spc5xxx [09:38] Sorry, I don't know anything about spca5xxx - try searching on http://bots.ubuntulinux.nl/factoids.cgi [09:38] Sorry, I don't know anything about spc5xxx - try searching on http://bots.ubuntulinux.nl/factoids.cgi === jordo2323 [n=jordo23@CPE-70-94-37-97.wi.res.rr.com] has joined #ubuntu [09:38] !grub [09:38] grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto === jtreglos [n=chatzill@14.244.100-84.rev.gaoland.net] has left #ubuntu [] [09:38] unrar-free is in universe/utils === lozzy1141 [n=lozzy114@host81-159-146-180.range81-159.btcentralplus.com] has joined #ubuntu [09:38] Is there a way I can install Windows second to make a Dual Boot system with Ubuntu? === JP [n=jp@neu67-1-82-231-75-153.fbx.proxad.net] has joined #ubuntu [09:39] adm: unrar-free won't open this archive === bettsp [n=paul@cpe-75-180-31-171.columbus.res.rr.com] has joined #ubuntu [09:39] Hey, I installed Ubuntu yesterday and my sound has suddenly ceased to work. It was using the wrong sound card originally, but I changed it in Gnome Volume Control thingy and whacked all the volume levels up and I still get no sound [09:39] jordo2323: theoretically... but it is much easier to install it first === JP [n=jp@neu67-1-82-231-75-153.fbx.proxad.net] has joined #ubuntu [09:39] possibly rar 3.0 format? [09:39] dunno [09:39] Where do I find the source code to the "Install / Remove Applications" applet? [09:39] It was working fine last night, stopped working since a reboot. === Sonic|Laptop [n=garrett@unaffiliated/sonicvanajr] has joined #ubuntu [09:40] Nice distribution, I might add. === zorro [i=zoral@zoral.bsnet.se] has joined #ubuntu === Crankymonky [n=dean@c-69-138-172-103.hsd1.md.comcast.net] has left #ubuntu [] === jake_ [i=jarelf@dsl-tkubrasgw1-fe0cfa00-18.dhcp.inet.fi] has joined #ubuntu === Antaeogo [i=Antaeogo@12-217-150-196.client.mchsi.com] has joined #ubuntu === dean__ [n=dean@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu [09:40] only non-free unrar can open rar 3.0 format files.. according to unrar-free's description [09:40] psusi: That's what I have been hearing.....and I can't seem to resize my ext3 partition in gparted to make an NTFs anyways.... [09:40] I'm using a Sound Blaster Audigy 2ZS === macphil [n=macphil@217-68-176-111.dynamic.primacom.net] has joined #ubuntu [09:40] jordo2323: why not? you are trying that from the livecd right? === chrisj [n=tortoise@209.79.152.253] has joined #ubuntu === Crankymonky [n=dean@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu [09:41] how do I update a bazaar branch on launchpad with my local changes? === Mourial [n=zzzz@bas7-montrealak-1167895961.dsl.bell.ca] has joined #ubuntu === esojjgfvhvnc [n=iuahjkdy@gateway.rodnilb.net] has joined #ubuntu === ztlxvefk [n=rvgk@85-18-74-50.ip.fastwebnet.it] has joined #ubuntu === faeoil [n=hkrdiwc@125.32.13.114] has joined #ubuntu === yjicuxvyf [n=hxmpjxp@202.146.91.196] has joined #ubuntu === xbscvnov [n=ggloich@200.6.175.95] has joined #ubuntu === sgkasdjodhxm [n=axpvrsrp@200.103.16.7] has joined #ubuntu [09:41] NAZIS [09:41] NAZIS [09:41] NAZIS === fcwxpzuktiq [n=wpxbts@c911acb2.bhz.virtua.com.br] has joined #ubuntu [09:41] NAZIS === kduckknwnoqq [n=attb@201.30.93.5] has joined #ubuntu [09:41] -esojjgfvhvnc:#ubuntu- NAZIS [09:41] -ztlxvefk:#ubuntu- NAZIS [09:41] -yjicuxvyf:#ubuntu- NAZIS [09:41] -faeoil:#ubuntu- NAZIS === Enselic [n=martin@lund-idb4-ux4-vl88-85-235-30-35.perspektivbredband.net] has joined #ubuntu [09:41] NAZIS [09:41] -fcwxpzuktiq:#ubuntu- NAZIS [09:41] NAZIS [09:41] -sgkasdjodhxm:#ubuntu- NAZIS [09:41] NAZIS [09:41] -kduckknwnoqq:#ubuntu- NAZIS [09:41] ACTION NAZIS [09:41] ACTION NAZIS [09:41] ACTION NAZIS [09:41] ACTION NAZIS [09:41] ACTION NAZIS [09:41] ACTION NAZIS [09:41] ACTION NAZIS [09:41] NAZIS [09:41] -xbscvnov:#ubuntu- NAZIS [09:41] ACTION NAZIS === b0ss_ [n=b0ss@ool-18b8d1ca.dyn.optonline.net] has joined #ubuntu === bhnxtlvy [n=rvxy@200.164.17.147] has joined #ubuntu [09:41] ? === JP [n=jp@neu67-1-82-231-75-153.fbx.proxad.net] has joined #ubuntu === esojjgfvhvnc [n=iuahjkdy@gateway.rodnilb.net] has left #ubuntu [] === faeoil [n=hkrdiwc@125.32.13.114] has left #ubuntu [] === ztlxvefk [n=rvgk@85-18-74-50.ip.fastwebnet.it] has left #ubuntu [] === fcwxpzuktiq [n=wpxbts@c911acb2.bhz.virtua.com.br] has left #ubuntu [] === yjicuxvyf [n=hxmpjxp@202.146.91.196] has left #ubuntu [] === kduckknwnoqq [n=attb@201.30.93.5] has left #ubuntu [] === xbscvnov [n=ggloich@200.6.175.95] has left #ubuntu [] === sgkasdjodhxm [n=axpvrsrp@200.103.16.7] has left #ubuntu [] [09:41] NAZIS [09:41] -bhnxtlvy:#ubuntu- NAZIS [09:41] ACTION NAZIS === lozzy1141 [n=lozzy114@host81-159-146-180.range81-159.btcentralplus.com] has left #ubuntu [] [09:42] wtf? === lozzy1141 [n=lozzy114@host81-159-146-180.range81-159.btcentralplus.com] has joined #ubuntu [09:42] psusi: no....I actually installed Ubuntu Edgy over my windows system in hopes of installing windows right back next to it..... === bhnxtlvy [n=rvxy@200.164.17.147] has left #ubuntu [] [09:42] jeez [09:42] wtf... === sintax [n=eniac235@242673hfc144.tampabay.res.rr.com] has joined #ubuntu [09:42] (15:43:10) esojjgfvhvnc: (notice) NAZIS === AntiSpamBot [n=supybot@unaffiliated/afterdeath/bot/antispambot] has joined #ubuntu [09:42] whoa [09:42] i got a question can i put a password different from my admin password on a folder [09:42] wtf [09:42] i have stuff [09:42] wtf? [09:42] that other pple [09:42] shudnt see === mode/#ubuntu [+o gnomefreak] by ChanServ === lozzy1141 [n=lozzy114@host81-159-146-180.range81-159.btcentralplus.com] has left #ubuntu [] === mode/#ubuntu [+b *!*@user-0cet8gf.cable.mindspring.com] by gnomefreak === sgorilla80 [n=tlp@user-0cet8gf.cable.mindspring.com] has left #ubuntu [requested] === mode/#ubuntu [-o gnomefreak] by gnomefreak === lozzy1141 [n=lozzy114@host81-159-146-180.range81-159.btcentralplus.com] has joined #ubuntu [09:42] Is there a Maple counterpart on linux? I.e. a open source counterpart? === bettsp [n=paul@cpe-75-180-31-171.columbus.res.rr.com] has joined #ubuntu [09:42] anyone else see all that? [09:42] Could someone help me. I need help with Parallels workstation? [09:42] yes byan [09:42] i do [09:42] Can anyone help me with my sound please? [09:42] irssi is hating it [09:42] Byan, yepp - me too - wtf? [09:42] jordo2323: why didn't you just let ubuntu shrink windows and isntall beside it? [09:43] Byan: Indeed, my irssi is exploding. === Alakazamz0r [n=Alakazam@198.170.183.130] has joined #ubuntu [09:43] ubuntu +nvidia = impossible [09:43] psusi: I don't know really, I kind of wanted to start over.... === jonas123 [n=jonas@e18-201b.gardur.hi.is] has joined #ubuntu [09:43] lol.. I thought I did that.. just pushed down some keys on the keyboard when all that came up [09:43] The algebra of software. [09:43] PLEASE HELP ME [09:43] PLEASE HELP ME === vrsvzbiwnu [n=mswe@sesiones.prodigy.net.mx] has joined #ubuntu === faeoil [n=hkrdiwc@125.32.13.114] has joined #ubuntu === esojjgfvhvnc [n=iuahjkdy@gateway.rodnilb.net] has joined #ubuntu === ztlxvefk [n=rvgk@85-18-74-50.ip.fastwebnet.it] has joined #ubuntu === sqlnyn [n=yakvflkp@218.12.92.172] has joined #ubuntu === xbscvnov [n=ggloich@200.6.175.95] has joined #ubuntu === hylgonlmey [n=uhnzozka@58.26.103.2] has joined #ubuntu === yjicuxvyf [n=hxmpjxp@202.146.91.196] has joined #ubuntu === causwel [n=fjeu@193.188.161.31] has joined #ubuntu === yteopbh [n=lzogrbnd@193.188.161.31] has joined #ubuntu === jqrwifvtxttm [n=vnupgo@61.128.98.138] has joined #ubuntu === jjcswwuusp [n=beqsfuch@212.162.130.86] has joined #ubuntu === zuyafjgs [n=tavw@201.14.154.10] has joined #ubuntu === kduckknwnoqq [n=attb@201.30.93.5] has joined #ubuntu === sgkasdjodhxm [n=axpvrsrp@200.103.16.7] has joined #ubuntu === fcwxpzuktiq [n=wpxbts@c911acb2.bhz.virtua.com.br] has joined #ubuntu === cmaapxhg [n=cgsusoqt@217.77.99.76] has joined #ubuntu === rzqelbaxbora [n=kpbhuxaf@201.39.188.137] has joined #ubuntu [09:43] NAZIS [09:43] NAZIS === bhnxtlvy [n=rvxy@200.164.17.147] has joined #ubuntu [09:43] NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] -vrsvzbiwnu:#ubuntu- NAZIS [09:43] -esojjgfvhvnc:#ubuntu- NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] -ztlxvefk:#ubuntu- NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] -causwel:#ubuntu- NAZIS [09:43] NAZIS === mrcenyyb [n=iynahxi@200.55.35.192] has joined #ubuntu [09:43] -yteopbh:#ubuntu- NAZIS [09:43] -faeoil:#ubuntu- NAZIS [09:43] -hylgonlmey:#ubuntu- NAZIS [09:43] -sqlnyn:#ubuntu- NAZIS [09:43] -jqrwifvtxttm:#ubuntu- NAZIS [09:43] -jjcswwuusp:#ubuntu- NAZIS [09:43] NAZIS [09:43] -cmaapxhg:#ubuntu- NAZIS [09:43] -fcwxpzuktiq:#ubuntu- NAZIS [09:43] NAZIS [09:43] -sgkasdjodhxm:#ubuntu- NAZIS [09:43] NAZIS [09:43] hi U all [09:43] NAZIS [09:43] -yjicuxvyf:#ubuntu- NAZIS [09:43] NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] NAZIS [09:43] -xbscvnov:#ubuntu- NAZIS === icepmka [n=yxucakt@201-40-73-170.pgosm300.ipd.brasiltelecom.net.br] has joined #ubuntu [09:43] NAZIS [09:43] -icepmka:#ubuntu- NAZIS [09:43] NAZIS [09:43] -zuyafjgs:#ubuntu- NAZIS [09:43] -mrcenyyb:#ubuntu- NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] ACTION NAZIS [09:43] -kduckknwnoqq:#ubuntu- NAZIS [09:43] ACTION NAZIS [09:43] YES! === ubuntu [n=ubuntu@83.68.79.213.mielec79.tnp.pl] has joined #ubuntu [09:43] ACTION NAZIS [09:43] YES! [09:43] wtf? [09:43] NAZIS [09:43] -rzqelbaxbora:#ubuntu- NAZIS [09:43] jesus christ [09:43] NAZIS [09:43] -bhnxtlvy:#ubuntu- NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] ACTION NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] ACTION NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] NAZIS [09:43] wtf? === mode/#ubuntu [+o gnomefreak] by ChanServ [09:43] NAZIS [09:43] -faeoil:#ubuntu- NAZIS [09:43] -hylgonlmey:#ubuntu- NAZIS [09:43] -esojjgfvhvnc:#ubuntu- NAZIS [09:43] -ztlxvefk:#ubuntu- NAZIS [09:43] -yjicuxvyf:#ubuntu- NAZIS [09:43] -vrsvzbiwnu:#ubuntu- NAZIS [09:43] -causwel:#ubuntu- NAZIS [09:43] -kduckknwnoqq:#ubuntu- NAZIS [09:43] -yteopbh:#ubuntu- NAZIS [09:43] -jqrwifvtxttm:#ubuntu- NAZIS [09:43] -sqlnyn:#ubuntu- NAZIS [09:43] -jjcswwuusp:#ubuntu- NAZIS [09:43] -zuyafjgs:#ubuntu- NAZIS [09:43] -sgkasdjodhxm:#ubuntu- NAZIS [09:43] -cmaapxhg:#ubuntu- NAZIS [09:43] -fcwxpzuktiq:#ubuntu- NAZIS [09:43] -xbscvnov:#ubuntu- NAZIS [09:44] NAZIS [09:44] what in the hell?! [09:44] -icepmka:#ubuntu- NAZIS [09:44] fuck off? flooders! [09:44] Just bots === mode/#ubuntu [+r] by gnomefreak [09:44] bye bye [09:44] ACTION NAZIS [09:44] ACTION NAZIS [09:44] ACTION NAZIS [09:44] ACTION NAZIS [09:44] ACTION NAZIS [09:44] ACTION NAZIS [09:44] ACTION NAZIS [09:44] ACTION NAZIS [09:44] ACTION NAZIS [09:44] ACTION NAZIS [09:44] ACTION NAZIS [09:44] ACTION NAZIS [09:44] -rzqelbaxbora:#ubuntu- NAZIS [09:44] ACTION NAZIS [09:44] ACTION NAZIS [09:44] ACTION NAZIS [09:44] ACTION NAZIS [09:44] ACTION NAZIS === pianoboy3333 [n=alex@ool-43567d61.dyn.optonline.net] has joined #ubuntu [09:44] ACTION NAZIS [09:44] make it stop [09:44] fuck off? flooders! === faeoil [n=hkrdiwc@125.32.13.114] has left #ubuntu [] === hylgonlmey [n=uhnzozka@58.26.103.2] has left #ubuntu [] === esojjgfvhvnc [n=iuahjkdy@gateway.rodnilb.net] has left #ubuntu [] === ztlxvefk [n=rvgk@85-18-74-50.ip.fastwebnet.it] has left #ubuntu [] === yjicuxvyf [n=hxmpjxp@202.146.91.196] has left #ubuntu [] === vrsvzbiwnu [n=mswe@sesiones.prodigy.net.mx] has left #ubuntu [] === causwel [n=fjeu@193.188.161.31] has left #ubuntu [] === kduckknwnoqq [n=attb@201.30.93.5] has left #ubuntu [] === yteopbh [n=lzogrbnd@193.188.161.31] has left #ubuntu [] === jqrwifvtxttm [n=vnupgo@61.128.98.138] has left #ubuntu [] === sqlnyn [n=yakvflkp@218.12.92.172] has left #ubuntu [] === jjcswwuusp [n=beqsfuch@212.162.130.86] has left #ubuntu [] [09:44] ACTION NAZIS [09:44] holy fuck [09:44] fuck off? flooders! === zuyafjgs [n=tavw@201.14.154.10] has left #ubuntu [] === sgkasdjodhxm [n=axpvrsrp@200.103.16.7] has left #ubuntu [] === cmaapxhg [n=cgsusoqt@217.77.99.76] has left #ubuntu [] === fcwxpzuktiq [n=wpxbts@c911acb2.bhz.virtua.com.br] has left #ubuntu [] === xbscvnov [n=ggloich@200.6.175.95] has left #ubuntu [] [09:44] NAZIS [09:44] -bhnxtlvy:#ubuntu- NAZIS [09:44] So could someone help me? [09:44] ACTION NAZIS === icepmka [n=yxucakt@201-40-73-170.pgosm300.ipd.brasiltelecom.net.br] has left #ubuntu [] === AntiSpamBot [n=supybot@unaffiliated/afterdeath/bot/antispambot] has joined #ubuntu === rzqelbaxbora [n=kpbhuxaf@201.39.188.137] has left #ubuntu [] [09:44] fuck yeah! === mode/#ubuntu [+b *!*@124.82.41.33] by gnomefreak === mypapit [n=manbruta@124.82.41.33] has left #ubuntu [requested] === bhnxtlvy [n=rvxy@200.164.17.147] has left #ubuntu [] [09:44] Could someone help me? [09:44] hahah [09:44] psusi: I have gparted installed, but there is no option to shrink the ext3 partition.... [09:44] NAZIS [09:44] -mrcenyyb:#ubuntu- NAZIS [09:44] ACTION NAZIS [09:44] can you make it so only registered users can PM you? what's the command for that [09:44] STOPPPP [09:44] 201-40-73-170.pgosm300.ipd.brasiltelecom.net.br [09:44] that is a funky typeface they are spamming with. It is taller than 2 lines. Some unicode typeface? === mrcenyyb [n=iynahxi@200.55.35.192] has left #ubuntu [] [09:44] is someone copy-pasting something like binarydata? [09:44] !ops [09:44] Help! Keybuk, mdz, Amaranth, tritium, ajmitch, crimsun, ogra, CarlK, Seveas, Burgundavia, apokryphos, thoreauputic, nalioth, Madpilot, ompaul, rob, Hobbsee, imbrandon, DBO or gnomefreak! [09:44] sintax : That's on by default. === Chris62vw [n=chris@lv.pm.org] has joined #ubuntu [09:44] test [09:44] czy kto tu jest [09:44] jake_: looked like it [09:44] testuje poczenie [09:44] oh [09:44] !parallel [09:45] preaction: no need [09:45] parallel! [09:45] Sorry, I don't know anything about parallel - try searching on http://bots.ubuntulinux.nl/factoids.cgi [09:45] apologies then [09:45] i almost got kicked off === ofer0 [n=ofer0x@62-90-76-238.barak.net.il] has joined #ubuntu [09:45] parallel workstation! [09:45] I can't belive people are so stupid that they want to do such things.. What is the point of doing it? =/ [09:45] how to resolve this locale problem: http://pastebin.ca/244449 [09:45] Well, that was weird. [09:45] that was unhelpful [09:45] is it possible to ban that IP for some specified time or forever? [09:45] So could someone help me? [09:45] saxin, of doin what ? [09:45] Need help with Parallel Workstation [09:45] ;wc === Chris62vw [n=chris@lv.pm.org] has left #ubuntu [] [09:45] jordo2323: you must run it from the livecd, it can not manipulate partitions that are in use [09:45] no-one likes it [09:45] ofer0: massive flood === lozzy1141 [n=lozzy114@host81-159-146-180.range81-159.btcentralplus.com] has left #ubuntu [] [09:46] hey ayaa, have you tried sudo dpkg-reconfigure locale ? [09:46] saxin, damn, I missed it === Madkiss [i=madkiss@freenode/staff/madkiss] has joined #ubuntu === hangfire [n=hangfire@200.95.149.220.cableonline.com.mx] has joined #ubuntu [09:46] 22:41:49 -!- AntiSpamBot [n=supybot@unaffiliated/afterdeath/bot/antispambot] has quit [Excess Flood] [09:46] ofer0, yes but what locale should i use ? [09:46] HELLO THIS IS A ROOM FOR HELP SO SOMEONE HELP ME [09:46] that's not a very good anti spam bot... [09:46] oh... I'm sorry... I'm from Finland and I'm very very new(bie) Ubuntu user [09:46] psusi: I am not running gparted from the live CD.....I installed it to my HD after installation. [09:46] I started from Fedora Core 1 about 2 years ago === b_52Free [n=skimo@41.248.1.159] has joined #ubuntu [09:47] pcgigabyte: i said lose the caps === therapy [n=Unknown@d54C0E99B.access.telenet.be] has joined #ubuntu [09:47] jordo2323: yes... which isi your problem... you NEED TO run it from the livecd [09:47] ayaa, I use the locale "C". I think it's the best. If you want you can use UTF-8, that way you will be able to see characters from foreign languages such as french, german, hebrew, etc.. [09:47] pcgigabyte- whats the question === mode/#ubuntu [+b *!*@200.55.35.192!##unavailable] by nalioth [09:47] pcgigabyte: This is a room full of volunteers who may or may not want to help you. Calm down, and wait for everyone to stop reading through the message spam attack that just happaned [09:47] hi *, anyone experience on setting up infrared or lirc [09:47] jordo2323: it can't shrink the partition while it is in use [09:47] pcgigabyte: if you ask a question than people can help you [09:47] gnomefreak, hey, where's seveas ? [09:48] Okay I have installed Parallel Workstation in Ubuntu. I install Windows XP inside it. It runs find but I have no sound. When I start the virtual os it says Error Writing to Sound Device. === plugwash [i=plugwash@p10link.net] has joined #ubuntu [09:48] How do I fix it [09:48] ofer0: dont know === plugwash [i=plugwash@p10link.net] has left #ubuntu [] === AnMaster [n=AnMaster@unaffiliated/anmaster] has joined #ubuntu [09:48] anyone experienced with setting up routers on ubuntu? === rambo3 [n=stone123@c-caf871d5.027-6-6b73641.cust.bredbandsbolaget.se] has joined #ubuntu === brandini [n=brandini@adsl-70-228-104-3.dsl.akrnoh.ameritech.net] has left #ubuntu [] [09:48] youser, what do you mean by "setting up routers"? [09:48] psusi: Is there a better rar program to open an archive than the one in KDE or Gnome? I keep getting errors.... === lozzy [n=lozzy114@host81-159-146-180.range81-159.btcentralplus.com] has joined #ubuntu [09:48] first question: why my time is not updated from NTP server? I have to adjust time every boot up [09:48] well my dlink router is veing weird [09:48] jordo2323: no idea... I refuse to touch rar [09:49] Is it difficult to setup Compiz/XGL on Ubuntu 6.10 ? Anyone have an easy guide or HOWTO ? [09:49] pcgigabyte- do you have a sound card? [09:49] jordo2323, I use "unrar" === Yvonne [n=01101110@pdpc/supporter/active/Yvonne] has joined #ubuntu [09:49] jake_, dunno possibly improper timezone setting [09:49] hi, i just installed ubuntu and am wondering how i can make ubuntu detect the external monitor which i am using on my notebook. could somebody help me with that? [09:49] hangfire yes. I can hear fine through my sound card. I just can't get it to work in Parallel [09:49] it works after im connected to the net and i switch the chords from the modem to the router [09:49] Anyone got any advise with my Audigy 2ZS on 6.10? I'm getting no sound whatsoever. I'm sure I@m using the correct device. [09:49] jake_, try installing ntpdate. then use "sudo ntpdate 0.pool.ntp.org" [09:49] but if i try to hook it up before i start my comp it cant detect y ethernet card [09:49] pcgigabyte, edit the vm and at sound change mixer to /dev/dsp [09:50] already did adm no luck [09:50] or if not, can someone tell me how to set a default soundcard through the console? [09:50] mm [09:50] is there an apt-get search command? [09:50] sintax, apt-cache search <> [09:50] i hope you understand what im saying [09:51] sintax, apt-cache search packagename [09:51] sintax, when instead of <> you put your search words [09:51] thank you :-D [09:51] is it possible to install XGL via apt-get? [09:51] lozzy, http://ubuntuforums.org/showthread.php?t=18802 [09:51] sintax, xgl support is in #ubuntu-xgl [09:51] Thank you ofer0 :) === ompaul [n=ompaul@gnewsense/friend/ompaul] has joined #ubuntu [09:51] lozzy, no. thank you! [09:51] ofer: Is unrar command line driven or through a GUI? [09:51] oo ty [09:51] oh, ok! [09:51] jordo2323, command line. but I like the terminal [09:52] hi, i just installed ubuntu and am wondering how i can make ubuntu detect the external monitor which i am using on my notebook. could somebody help me with that? [09:52] jordo2323, you currently use "file-roller" ? === sbc [n=sbc@83.72.201.52.ip.tele2adsl.dk] has joined #ubuntu === eobanb_ [n=eoban@156-56-153-29.dhcp-bl.indiana.edu] has joined #ubuntu [09:52] So any other suggestions adm [09:52] ofer0: what should happen? I got a response like: 10 Nov 04:22:45 ntpdate[5564] : the NTP socket is in use, exiting [09:53] i cannot connect to the internet after hooking up my router, but the router does work after ive connected to the internet first [09:53] pcgigabyte, not at the moment, sorry [09:53] but time is still wrong [09:53] youser, what type of router? [09:53] dlink [09:53] youser, did you configure the router? [09:53] i dont have the model name or number [09:53] is should be +2GTM (Finland time) [09:53] no [09:53] i dont know how [09:53] jake_, it means something isn't working correctly. you better investigate. netstat -antp [09:53] youser, is it a broadband router? [09:53] ive tried running pppoeconf with router hooked up and it cant find my network interface [09:53] jake_, use sudo tzconfig [09:54] youser, i.e. does it have a wan port? [09:54] its a cable internet router [09:54] ofer0: That is very helpful, thank you. However, when I use alsamixer, it uses my stupid onboard sound by default. How can I make sure it uses my Audigy? [09:54] youser, does it have a wan port? === cbgb [n=chris@p549FD80C.dip.t-dialin.net] has left #ubuntu ["Leaving"] [09:54] whats a wan port? [09:54] lozzy, you can configure the default sound device using the gnome volume controller [09:54] youser, like cable modem > router > pc is what you are trying to achieve? === mode/#ubuntu [-r] by gnomefreak [09:55] youser, wireless port === mode/#ubuntu [-o gnomefreak] by ChanServ [09:55] ofer0, no [09:55] hlst yes === vindrake [n=vindrake@AMontpellier-257-1-98-211.w86-219.abo.wanadoo.fr] has joined #ubuntu [09:55] and its not wireless === PiPak [n=asddas@adsl-84-227-49-144.adslplus.ch] has joined #ubuntu [09:55] youser, is there a rj45 jack on the back that says WAN or internet by it? [09:55] oops [09:55] wide area network === spidstrad [n=xtendtec@dsl017-073-184.chi4.dsl.speakeasy.net] has joined #ubuntu [09:55] no === aboredman [n=aboredma@dsl-154-189.aei.ca] has joined #ubuntu [09:55] just slots 1-5 === erUSUL [n=erUSUL@248.Red-83-35-0.dynamicIP.rima-tde.net] has joined #ubuntu [09:55] youser, ahh okay. === scout_ [n=scout@0x535c02af.kjnxx6.adsl-dhcp.tele.dk] has joined #ubuntu [09:55] im running on the router right now === mc44 [n=mc44@ip-81-170-97-80.cust.homechoice.net] has joined #ubuntu [09:56] youser, what model router do you have? [09:56] cuz i was paying xbox live last night [09:56] im nto sure all i know is its a dlink i havent been able to find anything on it === ubuntu [n=ubuntu@ip24-170-193-114.ga.at.cox.net] has joined #ubuntu === pianoboy3333 [n=alex@ool-43567d61.dyn.optonline.net] has joined #ubuntu === t3chn0b0y [n=joe@c-67-160-171-11.hsd1.or.comcast.net] has joined #ubuntu [09:56] ofer: whats the unrar standard command to unrar a file that was made into successive rar files for size? === salkot [n=andrew@c-24-13-96-4.hsd1.il.comcast.net] has left #ubuntu ["Leaving"] === ubuntu is now known as santeria === Przemcio78 [n=pm@83.2.19.132] has joined #ubuntu [09:56] ofer0: I'm afraid it still uses my realtek chip when I type 'alsamixer', I've changed the device in volume control. [09:56] ok im getting mad [09:56] youser, okay well to do cable > router > pc you would need a broadband router in your situation. Or a cable modem that controls its own connection. [09:56] right now i am connected through the router [09:57] I've had this problem before, and I could set it in my /etc/modprobe.conf, but Ubuntu doesn't have this file? [09:57] looking for some help related to wireless drivers. how do i find which driver version my wlan is using? === dean__ [n=dean@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu [09:57] youser, right now your setup requires that the computer logins in to get a connection from the isp I assume. === vavincavent [n=vavincav@136.7.101-84.rev.gaoland.net] has left #ubuntu ["Quitte"] [09:57] but if i restart with it hooked up it wont detect my network card [09:57] lozzy, don't know about that.. sorry mate [09:57] Does only the alternate install CD have the option to re-install the bootloader? [09:57] youser, ? [09:57] ofer0: no problem mate. === mikm[laptop] [n=michael@kron2-46-125.resnet.wisc.edu] has joined #ubuntu [09:57] im on my brothers computer which also has an nvidia card and im talking to you from kubuntu while mine doesnt work for ubuntu or any version(edgy,kubuntu,dapper) it just shows colored lines [09:57] ofer0: it seems that NTP server isn't workin' at all === RazvanS [n=NoName@84.232.234.192] has joined #ubuntu === Agrajag_ is now known as Agrajag === iwaterball [n=iearthba@IGLD-80-230-89-64.inter.net.il] has joined #ubuntu [09:57] i am hooked up through the router right now [09:57] youser, do you have dsl or cable modem? Because you mentioned pppoe? [09:58] but if ir estart it doesnt work === mnepton [i=mneptok@conference/ubuntuconf/x-988e9345d603a954] has joined #ubuntu [09:58] jake_, that would be impossible, I just updated my time using it. [09:58] cble modem === pcgigabyte [n=pc@74.128.160.224] has left #ubuntu [] [09:58] I'm not sure, but when I use command netstat -antp there is not shown anything like ntp [09:58] jake_, but you can try "ntpdate 1.pool.ntp.org [09:58] youser, but you use pppoe to conect to your isp? [09:58] has there been a fix for the bttv audio issue... ?? its the only thing stopping me from removing windows from my system.. i have to have television... [09:58] but it only works if i hook up the roter after ive connected directly with modem [09:58] I WANT UBUNTU :( [09:58] yes [09:58] ofer0: just something about gaim and this IRC Client [09:58] santeria: so download it [09:58] it doesnt work [09:58] youser, thats wierd. [09:58] jake_, is it related to the NTP issue ? [09:58] well its a cable modem but i use pon dsl-provider [09:59] dapper, edgy, and kubuntu all dont work [09:59] youser, did you just buy the router? [09:59] nope [09:59] how can I transfer a file via SSH into the PC I'm sitting at (ass opposed to scp, going from the one I'm sitting at) === La_PaRCa-WoRK [n=chatzill@Pharlap.ECE.McGill.CA] has joined #ubuntu [09:59] santeria, why don't they work? [09:59] whenever it starts to load it just shows colored lines [09:59] got it from my isp years ago [09:59] oh [09:59] and on my bro and dads computers they work fine === M0E^lnx [n=M0E@216.110.0.30] has left #ubuntu [] [09:59] ofer0: I'm not sure - I'm still a newbie in Linux, even I have 2 years experience [09:59] youser, your best bet would be to get a broadband router to share the connection. [09:59] santeria: what video card? how is that card configured in the BIOS? === yukio [n=yukio@host136-82-dynamic.57-82-r.retail.telecomitalia.it] has joined #ubuntu [09:59] santeria: is this the live CD? [09:59] but i dont get hwo it works [09:59] youser, or config your cable modem to see if you can set it up to login with out the need of the computer doing the pppoe connection. [10:00] like i can stay here and goplay xbox live right now === freacky22527 [n=arthur@82.234.91.6] has joined #ubuntu [10:00] ofer0: anyway - Linux is my last OS - I will not return to Windows; if I don't have to :) === JosefK [n=brett@82-42-147-9.cable.ubr01.sprt.blueyonder.co.uk] has joined #ubuntu === G-net|Gilnim [n=gilnim@unaffiliated/gilnim] has joined #ubuntu [10:00] i need to make it connect through the router right? [10:00] ubuntu wont detect the external monitor i am using on my notebook correctly. could somebody help me with that? [10:00] my brother has an agp nvidia 5950 ultra and i have a nvidia 6800gs === SirTwist [n=carsten@t54fc42dd.pool.terralink.de] has joined #ubuntu [10:00] for some reason i try to connect after the router is hooked up it wont find my n etwork card === SirTwist [n=carsten@t54fc42dd.pool.terralink.de] has left #ubuntu ["Leaving"] [10:00] which is pcie [10:00] jake_, great :) [10:00] ofer0: and I'm wondering... why I didn't start from ubuntu in first place; this distro seems be much better than FC [10:01] youser, right now your cable modem is just a box that changes the data from the line to a usuable signal. However its kind of a dumb box it still requires your computer to initiate the pppoe connection. Without the computer doing that you aren't connected to the net. === vishah [n=vishah@59.144.45.75] has joined #ubuntu === pingar [n=saltvik@ti500720a080-3375.bb.online.no] has joined #ubuntu [10:01] youser, right? [10:01] why cant my computer do that through the router? [10:01] santeria: is it an amd64? [10:01] how do i find the driver version my wireless card is using? [10:01] youser, because the router is probable asigning ips to the devices. [10:01] his is a amd 2200+ i think, mine is an amd64 3500+. [10:01] ahh [10:01] just a few things to work out and windows cd will be a toaster... :D [10:02] ofer0: I'm now studying wine, but still something problems raises up [10:02] so theres no way i can make my comp connect to the internet with my router hooked up? [10:02] would the 64 bit version of ubuntu work better? [10:02] youser, your cable modem is looking for your computer at lets say 192.168.1.0 and th router is telling yoru computer its at 192.168.1.100 or something you will have issues. [10:02] i have to always connectu sing modem then hook the modem through the router? [10:02] just upgraded to edgy. serverX doesn't start. fixed internet connection. any suggestion? nvidia drivers were installed and working before the dist-upgrade. [10:02] youser, you kind of need a hub in your situation not a router. But thats another story. === SunFish7 [n=SunFish7@cpc4-oxfd1-0-0-cust870.oxfd.cable.ntl.com] has joined #ubuntu [10:03] youser, does the router have an ip address? [10:03] thats a pain in the ass but at least i can still share my connection for now [10:03] and dapper, edgy and kubuntu all dont work on mine but work on my brother/dads [10:03] live cd [10:03] how would i check since its hooked up right now === _Er1K_ [i=erik@re-url.com] has joined #ubuntu [10:03] ubuntu wont detect the external monitor i am using on my notebook correctly. could somebody help me with that? [10:03] youser, ifconfig on yoru computer to get your current ip? [10:03] ifconfig? [10:03] ok [10:03] yeah [10:03] youser, open a terminal and type in ifconfig === [sYn] [n=syn@host-84-9-194-109.bulldogdsl.com] has joined #ubuntu === chx [n=chx@unaffiliated/chx] has joined #ubuntu [10:03] whats your ip showing up? === talisein [n=talisein@c-67-160-253-166.hsd1.ca.comcast.net] has joined #ubuntu === Music_Shuffle [n=Shuffler@c-67-191-161-231.hsd1.ga.comcast.net] has joined #ubuntu [10:04] inet addr [10:04] i have eth0, lo and ppp0 === jonas123 [n=jonas@e18-201b.gardur.hi.is] has left #ubuntu [] [10:04] youser, inet addr on eth0 === bLaZeD [n=wls@unaffiliated/blazed] has joined #ubuntu [10:04] inet6 addr: fe80::240:f4ff:fe66:65f5/64 === chx [n=chx@unaffiliated/chx] has left #ubuntu ["Viva] [10:04] thats for eth0 [10:04] youser, not inet6 inet just above that === mbamford [n=Matt@d207-81-186-112.bchsia.telus.net] has joined #ubuntu [10:05] eth0 Link encap:Ethernet HWaddr 00:40:F4:66:65:F5 [10:05] inet6 addr: fe80::240:f4ff:fe66:65f5/64 Scope:Link [10:05] UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 [10:05] RX packets:83210 errors:0 dropped:0 overruns:0 frame:0 === pi1l [n=ilia@frai.dorms.spbu.ru] has joined #ubuntu [10:05] it only shows inet6 for eth0 === chazco [n=chazco@ACBC6E11.ipt.aol.com] has joined #ubuntu [10:05] sorryif flooding [10:05] youser, okay what about ppp0 does that have a inet addr === chazco [n=chazco@ACBC6E11.ipt.aol.com] has left #ubuntu ["Konversation] [10:05] so anyone got any ideas to help my problem? [10:05] yep [10:05] What is it? [10:05] youser: you have a ppp0 connection which is usually used for dsl rather than cable tho [10:05] inet addr:206.191.91.86 [10:05] maybe i have dsl [10:05] hrm.... [10:05] i dunno the diff between dsl and cable === jordo2323 [n=jordo23@CPE-70-94-37-97.wi.res.rr.com] has joined #ubuntu [10:06] dsl = high speed thru phone, cable = cable [10:06] How do I extract a successive rar file in file roller? === vishah_ [n=vishah@59.144.45.75] has joined #ubuntu [10:06] i use a splitter between my tv and modem [10:06] so it is cabl [10:06] youser, dsl is throught he phone line cable modem is throught he cable like for your tv === year0369 [n=mike@89.15.99.0] has joined #ubuntu [10:06] can anybody tell me, how can i get and install linux kernel headers and source code for the Running kernel in ubuntu? [10:06] youser, what kind of jacked cable uses pppoe [10:06] should i not use pon dsl-provider to connect then? [10:07] i dunno [10:07] youser, who's your cable company? [10:07] the only way icould find to set up my conection was pppoeconf === turgon [n=turgon@VA1-1E-u-0687.mc.onolab.com] has joined #ubuntu [10:07] small canadian isp [10:07] amtelecom === G-net|Gilnim is now known as gilnim [10:07] youser, i've never heard of a cable modem using pppoe [10:07] crimsun: what's up with getting the hda modules into ubuntu? or will that have to be in fiesty? [10:07] shouldi use something other than pppoeconf to set u p my connection? === ragedragon [n=dragon@lns-bzn-53-82-65-57-195.adsl.proxad.net] has joined #ubuntu === eXistenZ [i=eXistenZ@unaffiliated/eXistenZ] has joined #ubuntu === frying_fish [n=frying_f@AC9FF527.ipt.aol.com] has joined #ubuntu === whadar [n=hadar@bzq-88-155-183-78.red.bezeqint.net] has joined #ubuntu [10:08] ok ill explain this all again. on my computer(amd64 3500+,6800gs pci-e 2gb ram) ubuntu and kubuntu dont work. but on my dads computer(intel celeron , integrated, 256 mb ram) and my brothers computer(amd 2200+,768 mb ram, nvidia fx5950 ultra agp) it works fine === edarague [n=edarague@ut-ciat-106-36.uniweb.net.co] has joined #ubuntu [10:08] cable using pppoe is possible but dumb cause you would lose bandwith for basicly the same resut [10:08] I am trying to extract a large rar file in file roller.....the kind that is .r00, .r01, .r02 etc......how is this done? === clash [n=clash@194.125.39.227] has joined #ubuntu [10:08] youser, plug the cable modem directly in to your pc. see if it gives you an ip address on eth0 === tremaine [n=tremaine@64-9-137-225.fwd.datafoundry.com] has joined #ubuntu [10:08] hello all === ChaKy [n=chaky@21-123.dsl.iskon.hr] has joined #ubuntu === babwe2 [n=poul@0x3e42bcbd.adsl.cybercity.dk] has joined #ubuntu [10:08] how can i sum the install size of (many) multiple packages? [10:08] ok one second ill unhook my router [10:09] what the problem is on mine, is that when it starts to load, it shows a bunch of horizontal/ sometimes vertical colored lines and doesnt do anything after that. [10:09] youser, something is wrong with your setup there. [10:09] santeria, try 64bit ubuntu === babwe2 is now known as babwe [10:09] ok [10:09] lol thatwas easy [10:09] you think that owuld work? [10:09] santeria: you could try the alternate CD installer which is a text based installer === caolan_ [n=caolan@82.152.208.141] has joined #ubuntu [10:09] youser, okay now try sudo ifdown eth0 [10:09] cause jordan_u said that prbobably idnt have anything to do with it last night [10:09] youser, then sudo ifup eth0 [10:09] whats that do [10:10] youser, brings the network card down then back on. [10:10] so download edgy 64 bit? [10:10] santeria, it might make some progress trying it, better than trying nothing [10:10] youser, then ifconfig and see if you have an inet addr for eth0 [10:10] or dapper 64 bit? === Ricesteam [n=pete@rn-eh0923.uwaterloo.ca] has joined #ubuntu === riao [n=riao@krlh-590cca1a.pool.einsundeins.de] has joined #ubuntu [10:10] true, and i have a lot of dvd-rs :) [10:10] Hey, just a quick q, how do I start up dual screen on my laptop? I have a monitor plugged in but no image is appearing yet... === Candamir [n=chatzill@189.140.234.220] has joined #ubuntu [10:11] personally i'd go for edgy, but.. it's up to you [10:11] i'll go with edgy === zandaa [n=ubuntu@84-105-215-153.cable.quicknet.nl] has left #ubuntu [] [10:11] caolan_, depends on the laptop if its possible or not. [10:11] is anyone here running and irc server under Ubuntu? === thea_ [n=thea@82-217-242-7.cable.quicknet.nl] has joined #ubuntu [10:11] !ircd > tremaine [10:11] jordo2323: I'm a newbie, but I'd done that successfully in Fedora Core - do you've any rar compatible extract software installed? [10:11] how can i resize the partitions on my hard disk? is this only possible during the install process? [10:11] im loving ubuntu on my dads slow ass computer tho he has like a 1200 mhz celeron, 256 mb ram and it runs alot faster than windows :D [10:11] Candamir, gparted [10:12] jake_ I just installed Ubuntu....I have file roller.... [10:12] candamir : qparted [10:12] Candamir, the default install I believe resizes the windows disk and ubuntu takes 50% of the drive. [10:12] how can i sum the install size of all available packages? [10:12] h1st0, I have done it under WinXP... but I know how troublesome laptops can be in linux. Anywhere I might be able to find out if it is possible? [10:12] jordo2323: have you ever before use Linux ? [10:12] gparted is for gnome? [10:12] santeria: does it get to the boot menu? === cntb [n=aya@85-250-30-165.bb.netvision.net.il] has joined #ubuntu [10:12] jake_: Yeah.... === funkyHat_ [n=matt@cpc7-nthc3-0-0-cust812.nrth.cable.ntl.com] has joined #ubuntu [10:12] caolan_, what type of video chip does the laptop have? [10:12] jake_: brb === vcef [n=vita@srot.kolej.mff.cuni.cz] has joined #ubuntu [10:13] jordo2323: so you aren't so newbie :) [10:13] have extremely high resolution want to lower resolution on KDE windows manager . HOW? [10:13] Is there a good symbolic calculator for Linux? === ranger [n=chatzill@88.134.33.160] has joined #ubuntu === Tampler [n=falafel@83.142.21.168] has joined #ubuntu [10:13] question: how do i find which version is my wireless card (centrino ipw2100) driver is using? === pecisk [n=pecisk@purvc-44-54.maksinets.lv] has joined #ubuntu === pgurumur [n=pgurumur@c-67-188-138-32.hsd1.ca.comcast.net] has left #ubuntu [] [10:14] gpaterd or wais it qparted is for GNOME or something like that.. I'd use it in Fedora Core and it really does know what it is doing [10:14] h1st0, I'm guessing a bit here, but I think its some SiS model [10:14] wais == was === bradley [n=bradley@bas3-montreal02-1096691242.dsl.bell.ca] has joined #ubuntu [10:14] question: how can i start the wpa_supplicant at boot? [10:14] how do I make drives not write protected on my system? === hyphenated [n=cgilmour@nzns1.eservglobal.co.nz] has joined #ubuntu [10:14] h1st0, its a Dell Inspiron 1000 [10:14] caolan_, hrm... possibly search for your model of laptop on the forums but you will most likely hav eto edit your xorg.conf to get it going. [10:14] when running the program from alt+F2, neither gparted nor qparted works [10:15] i think im gonna go back to mandriva [10:15] !mount > SeAofSaRo [10:15] Candamir: did you install it? [10:15] ubuntu sucks @ NVidia drivers [10:15] its saddening too [10:15] if anybody is having the problem where sessions/startup programs doesn't save settings do this sudo chmod a+w /home/[USERNAME] /.config/autostart/ the problem is in Edgy the file is owned by root rather than the user, so settings don't get saved, this will change the owner to you [10:15] Alakazamz0r: mine work fine [10:15] does beryl cause many problems --in general or in setup? === kaptengu [n=gurra@c213-100-60-132.swipnet.se] has joined #ubuntu [10:15] gnomefreak, with extreme hacking? [10:15] Alakazamz0r, really nvidia-glx too difficult for you? === wikijeff [n=jeff@CMU234.RES.cmu.edu] has joined #ubuntu [10:15] alakazamz0r, er.. are you being funny? [10:15] h1st0, no... === omac [n=omac@ppp-216-106-110-161.storm.ca] has joined #ubuntu [10:15] CarinArr, no [10:15] bradley: not really but please see #ubuntu-xgl === youser_ [n=owner@67-58-208-80.amtelecom.net] has joined #ubuntu === Matt [i=matt@freenode/staff/matt] has joined #ubuntu [10:15] having said that i install my nvidia drivers using the nvidia installer [10:15] im back [10:15] gnomefreak, thanks. === sheriff_ [n=gilbert@81.213.185.162] has joined #ubuntu [10:15] Alakazamz0r, then how do they suck? [10:15] Alakazamz0r: that is a personal problem not nvidia problem [10:15] h1st0, thanks for the tip, I'll see if I can find some Xorg.conf editing article [10:15] i was getting horrible 30 sec lags [10:15] work perfectly though [10:15] they install great h1st0 but... all i get is 640x480@50hz === tech09 [n=marc@p57A66EB1.dip.t-dialin.net] has joined #ubuntu [10:16] question: how can i start the wpa_supplicant at boot? what need i to modify? [10:16] To install any of those desktop docks do i also have to install xgl? [10:16] and i dont feel like hacking my freakin xserver just to get it to give me a decient resolution. [10:16] h1st0: it says !mount event not found [10:16] Alakazamz0r, oh so your monitor is set up wrong or they aren't installed properly [10:16] its a gparted [10:16] is there some special ways i should set my cable connection thats not pppoeconf? [10:16] Alakazamz0r, you don't have to hack xserver. [10:16] h1st0, it has to do with the 440mx nvidia car4d. [10:16] Alakazamz0r: change your refresh rates or add the res. to your xorg [10:16] its my work computer, i really dont need DRI... but it'd be nice for the fast switch beryl manager [10:16] gnomefreak, i already have. [10:16] Alakazamz0r, sudo dpkg-reconfigure xserver-xorg will bring up a little screen in terminal where you can select the resolutions you want availbile. [10:16] done that too [10:17] alakazamz0r, g4 440mx? === calvin_ [i=user31@2-156-142-200.mcmtelecom.com.br] has joined #ubuntu [10:17] yes CarinArr [10:17] Alakazamz0r: did you make your refresh rates. more of a span? [10:17] alakazamz0r, my laptop has that exact card and has always worked flawlessly with ubuntu [10:17] youser: system>administration>networking . Make sure your wired connection is set to DHCP (not static ip) [10:17] gnomefreak, they're that that the Trinitron monitor states === calvin_ [i=user31@2-156-142-200.mcmtelecom.com.br] has left #ubuntu ["Leaving"] [10:17] plz. help me [10:17] Alakazamzor: is it possible to run beryl with older ubuntu releases? [10:17] !resolution [10:17] The X Window System is the part of your system that's responsible for graphical output. To restart your X, type this in a console: sudo /etc/init.d/?dm restart - To fix screen resolution or other X problems: http://help.ubuntu.com/community/FixVideoResolutionHowto [10:17] with direct cable modem is till nly have an inet6 address for eth0 [10:17] question: how can i start the wpa_supplicant at boot? what need i to modify? i use debian edgy [10:17] including 1400x1050 res === lol [n=lol@bgs222.neoplus.adsl.tpnet.pl] has joined #ubuntu [10:17] oops, thanks, installed it and i'm running it now [10:17] thanks [10:17] SeAofSaRo: on dapper thats about as far back as you can === ebel [n=rory@213-202-180-18.bas504.dsl.esat.net] has joined #ubuntu [10:18] how fix this bug in ubuntu 6.06 ? http://www.speedtouch.co.uk/330highspeed.asp === Ricesteam [n=pete@rn-eh0923.uwaterloo.ca] has joined #ubuntu [10:18] CarinArr, then why dont you screen me in and fix me up [10:18] :) === AnMaster [n=AnMaster@unaffiliated/anmaster] has left #ubuntu ["Leaving"] [10:18] question : To install any of those desktop docks do i also have to install xgl? [10:18] try.. nvidia-settings === ebel [n=rory@213-202-180-18.bas504.dsl.esat.net] has left #ubuntu ["Leaving"] [10:18] im gonna get a geforce 4 7000 series... [10:18] gnomefreak: so it won't work in ubuntu 6.06? [10:18] for my home desktop [10:18] only edgy? [10:18] hopefully it'll work a little better than this 440 card. [10:18] alakazamz0r, i'm not sure where you could go wrong to be honest === zspada15 [n=kvirc@unaffiliated/zspada15] has joined #ubuntu [10:18] looking in ubuntuforums.org it seems people are saying pppoeconf is used for cable modems [10:18] CarinArr, i dont know wither [10:18] it keeps saying... [10:19] Alakazamz0r, how did you install the nvidia drivers? [10:19] SeAofSaRo: ~ == dapper [10:19] brb [10:19] youser, Like I said you best bet is to buy a broadband router . Will solve all your problems and only costs about 45$ us [10:19] gnomefreak: where would I get an install for it? [10:19] To restart your X, type this in a console: sudo /etc/init.d/?dm restart - To fix screen resolution or other X problems --- wrong tip in KDE [10:19] SeAofSaRo: please see #ubuntu-xgl [10:19] note to bot maintainer [10:19] ok but should i be using pppoeconf to set up my cable connection? [10:19] SeAofSaRo: !google [10:20] or is that just for dsl [10:20] !google| SeAofSaRo [10:20] SeAofSaRo: Google is a very popular search engine: http://www.google.com - Google also has a Linux-specific search engine: http://google.com/linux [10:20] what software would you recommend for re-encoding an MP3 at lower quality (for a small mp3 player)? [10:20] youser, linksys makes some really nice ones. the router will intiate the pppoe connection so even if your pc is off your xbox will still be able to get online. [10:20] gnomefreak: thanks === dsnyders [n=dsnyders@206-248-137-198.dsl.teksavvy.com] has joined #ubuntu === OhEay [n=lol@exchange.cpha.com] has joined #Ubuntu [10:20] youser, I guess its possible tha tpppoe could be used for cable but that is just goofy. === cablesm102 [n=chatzill@65-78-17-184.c3-0.nwt-ubr2.sbo-nwt.ma.cable.rcn.com] has joined #ubuntu [10:20] lol [10:20] Has anyone had problems with GNOME themes on Edgy? [10:21] When I use a theme, I just get square, plain buttons [10:21] cablesm102, Not here. [10:21] ranger: http://ubuntuforums.org/showthread.php?t=208472 [10:21] Hey, is it possible to do a minimal Server Install of Ubuntu with the desktop CD? I have a pretty old laptop I want to get Linux on, but a full desktop install just wont run [10:21] Cause of memory issues. === rand [n=ricardo@87.196.255.186] has joined #ubuntu [10:21] Does anybody have a howto for installing from an ISO? === |mp| [n=mp@65.170.66.225] has joined #ubuntu [10:21] well thanks man youre a good guy [10:21] So I figured a bare server install would be the best way [10:21] appreciate your time === xopher [n=xopher@unaffiliated/xopher] has joined #ubuntu [10:21] youser, np === Alakazamz0r [n=Alakazam@198.170.183.130] has joined #ubuntu === darich [n=trickyki@host217-43-139-243.range217-43.btcentralplus.com] has joined #ubuntu [10:21] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode === eXistenZ [n=amerdakk@unaffiliated/eXistenZ] has joined #ubuntu [10:21] thats my problem. [10:21] !install | dsnyders [10:21] dsnyders: Ubuntu can be installed in lots of ways. Please see https://help.ubuntu.com/community/Installation for documentation. Problems during install? See https://wiki.ubuntu.com/CommonProblemsInstall and https://wiki.ubuntu.com/DapperReleaseNotes/UbiquityKnownIssues [10:21] OhEay, use the alternate iso [10:21] cablesm102: are you sure you're changing all the options in the theme? === adrigen [n=adrigen@218-214-68-125.people.net.au] has joined #ubuntu [10:21] The server ISO? === cablesm102 [n=chatzill@65-78-17-184.c3-0.nwt-ubr2.sbo-nwt.ma.cable.rcn.com] has joined #ubuntu [10:21] That's what I'm downloading now. === rand [n=ricardo@87.196.255.186] has joined #ubuntu === santeria[FL] [n=infectio@ip24-170-193-114.ga.at.cox.net] has joined #ubuntu [10:21] mike@unixadmin:~$ glxinfo |grep rend [10:21] direct rendering: Yes [10:21] OpenGL renderer string: GeForce4 MX Integrated GPU/AGP/SSE/3DNOW! [10:21] Alakazamz0r: how did you install them? [10:21] I was just wondering if it was possible to use the other one, but I guess not :) [10:21] ok im back on my regular computer === james296 [n=james@70.44.38.34.res-cmts.mlf.ptd.net] has joined #ubuntu [10:22] gnomefreak, via automatix === dra_ is now known as dra [10:22] Im trying to join a Java channel.. I keep getting this? [10:22] * #java ##java :Forwarding to another channel [10:22] * ##java :You need to be identified to join that channe [10:22] OhEay, not really possible with the desktop iso [10:22] thx i read the thread before but i found no answer [10:22] its a resolution problem w/the card. === Walm [n=blaa@walm.xs4all.nl] has left #ubuntu [] [10:22] it isnt how i installed them. [10:22] Ah [10:22] OhEay, i'm sure it is but it would be a pita [10:22] anyone knows how to fix it? [10:22] its a known issue w the 440 [10:22] My webcam did not work with the drivers supplied with Edgy (spca5xx and pwc) so after some try and error I have managed to make it work, installing another driver (gspcav1 from http://mxhaard.free.fr/download.html ). My question: Is it a good idea to stop the other two drivers from loading? How would I do that? I have tried with modprobe -r (which just runs but does not remove the driver from memory) and rmmod (whi [10:22] did someone ask about installing from an ISO before+ [10:22] Alakazamz0r: that could be the issue [10:22] Alakazamz0r, there is your problem you used automatix. Your problem isn't ubuntu [10:22] only 3 solutions, but what solution works? [10:22] cablesm102: i gave him the link [10:22] How well do you think a Minimal Ubuntu system would run on a K62 laptop (475MHz) with 64MB of ram, 4 gigs HD space? [10:22] JESUS christ man [10:22] i installed VIA the wiki\ [10:22] I just want something simple for web browsing and other various stuff === whadar [n=hadar@bzq-88-155-183-78.red.bezeqint.net] has left #ubuntu [] [10:22] 1st, then tried automatix. === Cuculetzu [n=10481537@86.126.172.86] has joined #ubuntu === jimp79 [n=Jim@70.90.101.105] has joined #ubuntu [10:23] h1st0, is it easier to just use my second monitor to 'mirror' my laptop screen? I just want to watch videos on it [10:23] actually 1st i tried installing it w/the installer on nvidias website. [10:23] yes it gets to the boot screen, but after it does and i select the mode, even with safe video mode it goes to a striped pattern up and down the screen which is colored [10:23] hm, allright, I need help, I accidentally pressed the sleep button on my keyboard, it screwed up my ext3journaling, fsck tried to fix it, and now when I log onto my default account, I cant start gnome-settings-daemon, or anything else useful for that matter.. Any thoughts? [10:23] then the wiki [10:23] then autopmatix === ok67 [n=oddgeir@98.80-202-28.nextgentel.com] has joined #ubuntu [10:23] what is the easiest way to install the latest NVIDIA driver? [10:23] Alakazamz0r: and if the version automatix has doesnt match your l-r-m than its not gonna work [10:23] hi there [10:23] Alakazamz0r, well if you can figure out how to remove what automatix installed I believe they have uninstall instructions on their site for the nivida driver. THen just sudo apt-get install nvidia-glx === theCore [n=alex@modemcable128.255-131-66.mc.videotron.ca] has joined #ubuntu [10:23] Alakazamz0r, all will be fine. [10:23] yes it gets to the boot screen, but after it does and i select the mode, even with safe video mode it goes to a striped pattern up and down the screen which is colored [10:23] !nvidia-beta | james296 [10:23] james296: For Ubuntu 6.10 (Edgy Eft), you can obtain the (unsupported!) Beta version of the binary NVidia drivers by using one of these repositories: "deb http://amaranth.selfip.com/ edgy lrm" (for x86) or "deb http://ubuntu.lupine.me.uk/ edgy lrm-amd64" (for AMD64) [10:23] !multimedia [10:23] For multimedia codecs see: https://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html and for applications see this: https://help.ubuntu.com/community/MultimediaApplications [10:23] ranger: how are you running wpa_supplicant now? [10:23] Can anyone tell me what this means on IRC? Im a real noob at IRC. * #java ##java :Forwarding to another channel [10:23] * ##java :You need to be identified to join that channe [10:23] !wmv [10:23] For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats [10:23] Alakazamz0r, have you tried editing Xorg manually? [10:24] i don`t know how to configure my network adaptor for the internet service in ubuntu linux [10:24] you think so eh h1 [10:24] i start it manual from bash === ana_ [n=ana@80-43-76-36.dynamic.dsl.as9105.com] has joined #ubuntu [10:24] we'll see [10:24] someone help me :O === allen [n=allen@203.84.184.246] has joined #Ubuntu [10:24] Alakazamz0r: identify with freenode. [10:24] ack [10:24] Im talkin about the latest stable version [10:24] yes it gets to the boot screen, but after it does and i select the mode, even with safe video mode it goes to a striped pattern up and down the screen which is colored [10:24] anyone here that can help me? [10:24] how do I do that? [10:24] Azakazamz0r, have you edited your xorg.conf? [10:24] aktiwers: === jonnylinuxnerd [n=jonnylin@88-107-245-170.dynamic.dsl.as9105.com] has joined #ubuntu [10:24] in everyones opinions, what's the best irc client for linux? [10:24] !register | Skygge_ [10:24] i want to ask about the terminal [10:24] Skygge_: Information about registering your Freenode nick is at http://freenode.net/faq.shtml#contents-userregistration [10:24] wpa_supplicant -i ath0 -c /etc/wpa_supplicant.conf -wB -D madwifi [10:24] santeria[FL] , what type of video card? [10:24] Yes GnomeFreak? [10:24] damn [10:24] >_>.. [10:24] ranger: and did you try putting "wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf" in /etc/networking/interfaces (please reply to my nick so I see it in the flood :) [10:24] anyone i can pm about the terminal [10:24] SeAofSaRo, irssi or bitchx [10:24] is my problem my 6800gs pci e or my amd64 3500+ [10:24] !register | aktiwers [10:24] aktiwers: Information about registering your Freenode nick is at http://freenode.net/faq.shtml#contents-userregistration === Vich [n=Chris@121.44.243.16] has joined #ubuntu [10:25] If I manually go in and edit xorg.conf to add a resolution, will that ever be over written? [10:25] Thanks a lot! [10:25] :) [10:25] allen, if your nick isnt' registered no one can pm you. [10:25] yw [10:25] someone said install 64 bit version [10:25] where in menus is kcontrol?? [10:25] mc44: what i try to put ? [10:25] damn [10:25] wait i need to register === Faint [n=jcrbutt@stjhnf0120w-142163094130.pppoe-dynamic.nl.aliant.net] has joined #ubuntu [10:25] so uhh is it my graphics card or my proc === salim [n=habel@pD951FF59.dip0.t-ipconnect.de] has joined #ubuntu === staubfaenger [n=lew@dyndsl-091-096-037-054.ewe-ip-backbone.de] has joined #ubuntu [10:26] allen2003, just /j #allen i'll talk to you there. [10:26] =*( [10:26] Which sources do you recommend for non-free packages such as w32codecs? PLF? Or debian-multimedia.org? Or something else? [10:27] #santeria? :) [10:27] tdn: I use seveas === Candamir [n=chatzill@189.140.234.220] has joined #ubuntu === staubfaenger [n=lew@dyndsl-091-096-037-054.ewe-ip-backbone.de] has left #ubuntu [] [10:27] !seveas | tdn [10:27] tdn: Seveas has a popular 3rd party repository for several packages. More info (and mirrors) on http://wiki.ubuntu.com/SeveasPackages [10:27] =*( [10:27] ranger: edit "/etc/rc.local", put the line "/sbin/wpa_supplicant -i ath0 -c /etc/wpa_supplicant.conf -wB -D madwifi" before exit 0 [10:27] what can i do if gparted locks the partition and won't let me resize it === Milk_ [n=None@74.134.57.196] has joined #ubuntu [10:27] I need help, I can't boot Ubuntu anymore, it shows up the ubuntu bootsplash and then it stops, does nothing anymore, what I did? I wanted to resize my ntfs partition with partition magic, it screwed up my partitiontable, I repaired it and reinstalled grub and then run PartitionMagic, which gave me an error, and now ubuntu doesnt work anymore. S.b., please help!! === plesnivec [n=plesnive@chello089173015179.chello.sk] has joined #ubuntu [10:27] Does only the alternate install CD have the option to re-install the bootloader? === jimp79 [n=Jim@70.90.101.105] has left #ubuntu [] [10:28] JosefK, ok. [10:28] dean__: no, it's trivial to do from the Live CD too [10:28] JosefK, why is seveas better than PLF or other sources? [10:28] okay i reboot now === Staz [n=staz@IRC-MAFIA.net] has joined #UBUNTU [10:28] hello everyone!! [10:29] tdn: PLF is no longer in active development, debian-multimedia is aimed, funnily, at debian (although you can grab the packages by hand, it would be unsafe to add it as a source) === vindrake [n=vindrake@AMontpellier-257-1-83-42.w86-216.abo.wanadoo.fr] has joined #ubuntu [10:29] I need to revert back to the kernel that shipped with 6.06, can I do that? [10:29] !! [10:29] if anybody is in a good mood and want to spent few minutes to explain me how to share files between windows xp and ubuntu./... [10:29] Hi, I have a smb share mounted I can create folders, remove those folders I created, but I cannot delete existing folders :( [10:29] tdn: and preference really, but it has all the packages I need === didymo [n=ashley@CPE-61-9-197-223.static.nsw.bigpond.net.au] has joined #ubuntu [10:29] get a Permission Denied Error [10:29] dapper,edgy and kubuntu all work on my dad's computer(celeron 1200mhz, 256 mb ram, integrated graphics) and my brothers computer(amd 2200+, nvidia 5950 ultra agp 768 mb ram) but not on mine (amd 64 3500+, nvidia 6800GS pci-e 2gb ram) [10:29] Staz: what is the fs and os of the network drive? [10:29] JosefK, ok. I just thought that PLF was up and running again. === killown [n=killown@unaffiliated/killown] has joined #ubuntu [10:29] plesnivec, use Samba, you need samba-common and samba-client (maybe smb instead of samba). Then you need to created user/pass in samba that matches both the linux and windows users [10:29] tdn: really? thanks for the update, if that's the case then it's your call between seveas/plf [10:30] santeria[FL] : you need to have the 64 bit build [10:30] ok [10:30] !x64 [10:30] Sorry, I don't know anything about x64 - try searching on http://bots.ubuntulinux.nl/factoids.cgi [10:30] JosefK, from the PLF website: PLF Ubuntu new maintainers: New maintainers for PLF Ubuntu were found, more info once everything is set up again. === youser [n=owner@67-58-208-80.amtelecom.net] has joined #ubuntu [10:30] does ubuntu have a repair option? [10:30] zspada15 : winXP NTFS [10:30] !repair === dr0ne- [n=fn@CABLE-72-53-45-212.cia.com] has joined #ubuntu [10:30] i think it was jordan_u said that probably had nothing to do with it but ill try, [10:30] Sorry, I don't know anything about repair - try searching on http://bots.ubuntulinux.nl/factoids.cgi [10:30] tdn: yeah, just googled/found it myself. seveas still has some packages I find handy, but you can see which packages are in both at their respective sites [10:30] Ok, I just got Ubuntu in the mail, and I can't seem to get it to install. I have the CD in the drive and I restarted and shut down but it just starts up my old OS again. === ronin2 [n=ronin2@160.79.119.66] has joined #ubuntu [10:30] tdn: it wouldn't hurt to add both either === Tampler [n=falafel@83.142.21.168] has joined #ubuntu [10:30] lol [10:31] dual booooooooooot [10:31] what can i do in gparted to unlock partitions for resizing? [10:31] anyone help me revert to an older kernel? [10:31] see whats wrong is that when it goes past the boot screen, on mine it shows this vertical striped pattern thats colored [10:31] what dvd-ripping application is best for gnome? [10:31] JosefK, ok. Thanks for the tip. [10:31] k9copy is kde, right? [10:31] Staz: thats why [10:31] boot from cd [10:31] Milk_ and how to make folders "sharable" ? [10:31] ? [10:31] Can someone help me? [10:31] Faint: check your BIOS (press escape/f2 etc.) and see if your CD drive is above the HD in the startup list [10:31] zspada15 : So how can I make deletion possible? [10:31] Staz: in order to be able to write to NTFS, you have to build it in your kernel [10:31] plesnivec, right click on them in nautilus and share them [10:31] Ok [10:31] Faint: or you may have an option for a one-time-boot menu by pressing F12 (if it's a dell, and possibly others) [10:31] Staz: delete from windows [10:32] Milk_ and in console it means what [10:32] I can write to it fine [10:32] see whats wrong is that when it goes past the boot screen, on mine it shows this vertical striped pattern thats colored [10:32] just not delete === chrisj [n=tortoise@38.99.84.33] has joined #ubuntu === MarcN [n=marc@dslv-1-139.mv.com] has left #ubuntu [] [10:32] uhm.... [10:32] is it in you /etc/fstab? [10:32] I'll be back if I run into more problems. [10:32] sure is [10:32] Thanks. === donblas [n=donblas@adsl-70-239-20-165.dsl.bcvloh.sbcglobal.net] has joined #ubuntu [10:32] ok [10:32] Staz: writing shouldn't be safe, but I just use an ext3 partition and installed http://www.fs-driver.org/ on windows [10:32] how about this === totall_6_7 [n=Freaky@c-67-189-91-111.hsd1.or.comcast.net] has joined #ubuntu [10:32] santeria[FL] : try the alternate CD text based installer, that should allow you to install [10:32] even if its a mounted smb share> [10:32] Staz: that link has an EXT2 driver for windows (that supports EXT3 fine) [10:32] ?* === Lattyware [n=Latty@host86-141-179-239.range86-141.btcentralplus.com] has joined #ubuntu [10:33] Milk_ i mean..what you really do to those files when you share them in nautilus [10:33] "sudo mkdir /windows chroot /media/windows (or whereever it is) /windows [10:33] Staz: oh, if it's samba that's fine [10:33] Staz: just install the 'smbfs' package and add it in your fstab [10:33] +&& [10:33] !ntfs-3g | JosefK, zspada15 Staz [10:33] what dvd-ripping application is best for gnome? [10:33] JosefK, zspada15 Staz: ntfs-3g is a linux driver which allows read/write access to NTFS partitions. It has been extensively tested but is still BETA software, so use it with caution. Dapper installation instructions http://lunapark6.com/?p=1710 [10:33] plesnivec, basically, your setting up a samba share in the smb.conf file [10:33] did that, read/write works great just no delete ;( [10:33] its a network FS though [10:33] UBUNTU I LOVE YA [10:33] gyaresu: BETA is the operative word, I think I qualified it with 'safe'? [10:33] ntfs-3g is totally safe. [10:33] http://images.ucomics.com/comics/ft/2006/ft061109.gif [10:33] Staz: how are you with command line? [10:34] i've installed bitch-x through synaptic, where do I find it now? === fabbione [n=fabbione@vpn-nat.fabbione.net] has joined #ubuntu [10:34] I fail to see how beta could be totally safe [10:34] not too bad === fraiddo [n=fred@AAmiens-151-1-32-192.w83-192.abo.wanadoo.fr] has joined #ubuntu [10:34] gyaresu: well the developers say its not stable yet... :p [10:34] Staz: open up a terminal and try this [10:34] JosefK, So find me a link to documented problems. === beuno [n=martin@68-155-114-200.fibertel.com.ar] has joined #ubuntu === j0nas` [n=tim@fctnnbsc16w-156034217232.nb.aliant.net] has joined #ubuntu [10:34] gyaresu: I don't have to prove the non-presence of bugs (knuth) [10:34] Staz: cd to your windows mount point, and then ls -alu === ranger [n=chatzill@88.134.33.160] has joined #ubuntu [10:35] JosefK, :) === Wulfie [i=wulfram@nat/transgaming/x-f459695501c06ed6] has joined #ubuntu [10:35] yep done [10:35] where can i get that text based installer [10:35] hey folks - I am trying to install a package that is i386 on a 64 bit system and it won't let me - how do I do it? === [sYn] [n=syn@host-84-9-194-109.bulldogdsl.com] has joined #ubuntu [10:35] and do i have to know anything about code or programming to get it to work since its text based? [10:35] rwxr-xr-x [10:35] and do i need to use the 64 bit version? [10:35] for dirs that is [10:35] mc44: i m back again, sry i need some help again, how can i get a ip address per dhcp [10:35] wait, wait... did gaim b4 get into ubuntu!!! [10:36] and is there a 64 bit text based verision? [10:36] Staz: chmod 777 /windows mountpoint/* === cntb [n=aya@85-250-30-165.bb.netvision.net.il] has joined #ubuntu [10:36] wait [10:36] don't do that === j0nas` [n=tim@fctnnbsc16w-156034217232.nb.aliant.net] has left #ubuntu [] [10:36] mc44: wpa_supplicant starts at boot now thx a lot [10:36] chmod 777 the dir u want to delete [10:36] !dvd [10:36] For playing DVD, see http://help.ubuntu.com/ubuntu/desktopguide/C/video.html - libdvdcss can be found at http://wiki.ubuntu.com/SeveasPackages [10:36] ok [10:36] and it should allow you [10:36] cant find changing resolution in kcontrol . can you help ? === sqeezer [n=clive@85-210-189-204.dsl.pipex.com] has joined #ubuntu [10:36] cntb: look in kubuntu [10:36] anyone know how I can install Skype into 64 bit ubuntu? [10:36] !#kubuntu | cntb [10:36] cntb: Kubuntu is Ubuntu with KDE, the K Desktop Environment, instead of Gnome. For more info see http://kubuntu.org - For support: #kubuntu - To install from Ubuntu: "sudo apt-get install kubuntu-desktop" [10:36] !fixres | cntb [10:36] anyone tried to update to 2.11 cvs of azureus and got permission problems? [10:36] cntb: The X Window System is the part of your system that's responsible for graphical output. To restart your X, type this in a console: sudo /etc/init.d/?dm restart - To fix screen resolution or other X problems: http://help.ubuntu.com/community/FixVideoResolutionHowto [10:37] zspada15 : no luck :( [10:37] mc44: i ve a dhcp server how can i optain a ip address now ? === OhEay [n=lol@exchange.cpha.com] has left #Ubuntu [] [10:37] i've installed bitch-x through synaptic, where do I find it now? [10:37] Wulfie, You probably need to make a 'chroot' [10:37] santeria[FL] , http://www.gtlib.gatech.edu/pub/ubuntu-releases/edgy/ubuntu-6.10-alternate-amd64.iso [10:37] rm -rf even? === yanis [n=yanis@88.218.25.113] has joined #ubuntu [10:37] SeAofSaRo: in terminal type bitchx === fm [n=fm@ter75-2-82-229-180-51.fbx.proxad.net] has joined #ubuntu === DreamThief2 [n=mathias@dslb-084-058-176-100.pools.arcor-ip.net] has joined #ubuntu [10:37] ty for resolution tips [10:37] I tried it on a file [10:37] santeria[FL] : http://releases.ubuntu.com/edgy/ubuntu-6.10-alternate-i386.iso [10:37] when I try to apt-get mplayer-686 I get the following : Package mplayer-686 is not available, but is referred to by another package. === hfhf [i=hfhf@dhcp-0-13-d3-a-e1-1a.cpe.mountaincable.net] has joined #ubuntu [10:37] hi! [10:37] my ntfs partition seems to be defect, what can I do? [10:37] the first one? [10:37] santeria[FL] : it should not be too complicated to install [10:37] or second one [10:37] yanis: enable multiverse repos [10:37] salim: cry [10:37] Wulfie, Effectively running an emulated i386 environment [10:37] or is it a mirror? [10:37] Where do I select the general spellcheck language in edgy please? [10:37] :-( [10:37] salim, Define defect please. [10:38] the first link is for amd64, second appears to be for x86 === Caplain_ [n=matt@29.detroit-04-05rs.mi.dial-access.att.net] has joined #ubuntu [10:38] what do you mean defect [10:38] can I try to repair it with windows cd but without defecting it? [10:38] HEY IM LIKIN THIS FIRST LINK 888 KB/S :D === gdb [n=cbell@circe.inetdb.com] has joined #ubuntu === anatol [n=anatol@client8.ostrov.net] has joined #ubuntu === rambo3 [n=stone123@c-caf871d5.027-6-6b73641.cust.bredbandsbolaget.se] has joined #ubuntu [10:38] gnomefreak: I have. : Package mplayer-686 is not available, but is referred to by another package. [10:38] salim: have another hd that will fit its data on it? [10:38] This may mean that the package is missing, has been obsoleted, or [10:38] santeria[FL] : please dont use caps [10:38] ranger: sorry cant help you with that [10:38] is only available from another source [10:38] gnomefreak: deb http://gr.archive.ubuntu.com/ubuntu/ edgy-backports main restricted universe multiverse === xopher [n=xopher@unaffiliated/xopher] has joined #ubuntu === Crankymonky [n=dean@c-69-138-172-103.hsd1.md.comcast.net] has joined #ubuntu [10:38] yanis: you havent. more than likely you enable the backports [10:38] mc44: thanks [10:38] ok.... [10:38] yanis: my point :) [10:38] it says something about error in cluster allocating, wrong bitmap size or so === SeAofSaRo [n=john@64-195-89-5.mod.clearwire-dns.net] has joined #ubuntu [10:38] question: hello how can i optain a ip address automatic ? [10:38] salim: ugg..... [10:39] yanis: on the lines that end in universe you add a space and type multiverse [10:39] !google | salim [10:39] salim: Google is a very popular search engine: http://www.google.com - Google also has a Linux-specific search engine: http://google.com/linux === jodd [n=vegard@host-81-191-42-40.bluecom.no] has joined #ubuntu === geser [n=michael@dialin107114.justdsl.de] has joined #ubuntu [10:39] salim: are you messing around with captive-ntfs or ntfs-3g? [10:39] yanis: backports are not the multiverse repos they are an extention of them [10:39] ranger, more specifics please? === Hello_Kitty__ [i=acidjame@ABordeaux-152-1-111-99.w90-5.abo.wanadoo.fr] has joined #ubuntu === zoral [i=zoral@zoral.bsnet.se] has joined #ubuntu === mrmoke [n=mrmoke@gein.vistech.net] has joined #ubuntu === jkimball4 [n=jerrid@wsip-70-165-105-41.om.om.cox.net] has left #ubuntu ["Leaving"] === bina [n=bina@exten-halls-130.soton.ac.uk] has joined #ubuntu [10:39] gnomefreak: like that: deb http://gr.archive.ubuntu.com/ubuntu/ edgy universe multiverse [10:39] when I want to mount, it says bad option bad superblock, missing codepage or other error [10:39] yanis: yes === kaktuspalme [n=kaktuspa@243.60.62.81.cust.bluewin.ch] has joined #ubuntu [10:40] gyaresu: wpa_supplicant starts at boot. === ollolol_ [n=ollolol@lan31-4-82-227-130-242.fbx.proxad.net] has joined #ubuntu [10:40] I tried to resize it with partition magic, but it didnt go well... [10:40] salim: your screwed [10:40] ranger, so iwconfig gives you a working connection? [10:40] salim: partition magic DOES NOT AND WILL NOT work, don't use it [10:40] salim: boot into windows and run a chkdsk === zoral [i=zoral@zoral.bsnet.se] has joined #ubuntu [10:40] and somehow I cant even boot my ubuntu, that's what makes me really cry === charon [n=charon@p5085717D.dip.t-dialin.net] has joined #ubuntu [10:40] somehow it stops during boot [10:40] gyaresu: but i get no ip addres. sry after a dhclient ath0 i get a ip address [10:40] ahhh, there's your problem [10:40] salim: it wipes everything from the disk [10:41] partition magic eats disks for lunch [10:41] never use it again if you can help it === jodd [n=vegard@host-81-191-42-40.bluecom.no] has left #ubuntu [] [10:41] !paste [10:41] pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (you can always find it in the channel topic, among other useful things) [10:41] ok I'll never use it again, but what can I do now? === SeAofSaRo [n=john@64-195-89-5.mod.clearwire-dns.net] has joined #ubuntu [10:41] format and reinstall === Alakazamz0r [n=Alakazam@198.170.183.130] has joined #ubuntu [10:41] its even better to use the fdisk from slackware than that [10:41] gyaresu: the wpa_supplicant starts at boot, after a dhclient ath0 in the bash i get a ip address. === LordMetroid [n=lordmetr@h196n3c1o885.bredband.skanova.com] has joined #ubuntu [10:41] ranger, Have you tried setting a static IP? (you may not want to) === RogerBacon [n=RogerBac@bas3-sherbrooke40-1177840301.dsl.bell.ca] has joined #ubuntu [10:41] ranger: does your /etc/networking/interfaces file have a " [10:41] auto lo ath0 [10:41] iface ath0 inet dhcp" line? [10:41] zspada15: fdisk does not do what partition magic does... you are comparing apples to oranges === Mr_Congeniality [n=mr_conge@71-213-103-189.slkc.qwest.net] has joined #ubuntu [10:42] well, if you can try booting into a live cd and running a fsck on /dev/hd [10:42] bleh [10:42] it didnt work [10:42] and it isnt worth my time. [10:43] but I can mount my ubuntu partitions, but why can't I boot into it? [10:43] gyaresu: yes i ve this line [10:43] it just stops showing the ubuntu splash with a few lines in the status bar === jonnylinuxnerd [n=jonnylin@88-107-245-170.dynamic.dsl.as9105.com] has left #ubuntu ["Leaving"] === j_ack [n=rudi@p508D87DC.dip0.t-ipconnect.de] has joined #ubuntu [10:43] auto ath0 [10:43] zspada15: not on an NTFS filesystem you can't [10:43] iface ath0 inet dhcp [10:43] i am in ubuntu live cd right now === cafuego [n=cafuego@ppp81-20.lns2.mel3.internode.on.net] has joined #ubuntu [10:43] hmmm.... [10:43] ur screwed [10:43] but === riao_ [n=riao@krlh-590cef47.pool.einsundeins.de] has joined #ubuntu === abdusabri [n=eng_abdu@213.212.193.27] has left #ubuntu [] [10:44] if u have another hd to store stuff on, boot into recovery mode on the m$ cd, and copy files onto that disk === jorik [n=olmo@cable-213-132-135-109.upc.chello.be] has joined #ubuntu === LoudMouthMan [n=nik@82-68-164-22.dsl.in-addr.zen.co.uk] has joined #ubuntu === BoeB [n=BROKER@u-126-242.adsl.univie.ac.at] has joined #ubuntu === mheath[laptop] _ is now known as mheath[laptop] === superjon [n=jeff@office4.tmcs.net] has joined #ubuntu === superjon [n=jeff@office4.tmcs.net] has left #ubuntu ["Leaving"] [10:45] if I just boot with windows cd, will it destroy my linux partitions? [10:45] salim: not if u dont install === La_PaRCa-WoRK [n=chatzill@Pharlap.ECE.McGill.CA] has joined #ubuntu === hill0703 [n=hill0703@76.17.232.83] has joined #ubuntu [10:45] gyaresu: can you help me how i a optain a ip address [10:45] if you install it will overwrite DRM [10:45] and if I repair? [10:45] !limewire > allen2003 [10:45] the windows repair feature usually makes things worse === deema [i=dtg5300@69.166.14.31] has joined #ubuntu [10:46] !limewire > me [10:46] what's allen2003? [10:46] Yes repair will overwrite DRM as well [10:46] ranger, yes. just reading 'up' rules (man interfaces). You need post-up type rule... === dv_ [n=dv@M1106P016.adsl.highway.telekom.at] has joined #ubuntu [10:46] http://www.youtube.com/watch?v=-RpoWKpAL9Q Ubuntu gets hacked!!!! === essenza [n=essenza@unaffiliated/essenza] has joined #ubuntu [10:46] hfhf: the person he was sending it to [10:47] 2 questions about openoffice: In Calc can you add the regression analysis equation to your graphs, and in Writer is there a way to center justify the page on the screen? [10:47] hfhf: it goes _topic_ > _username_ [10:47] does ubuntu has a repair option? [10:47] TV Shows! http://tvlinks.voodeedoo.org/ now we are at it :) Hate that Ubuntu Video [10:47] can anybody please tell me what is the safiest way of enabling network on vmware- virtual machine? [10:47] to install ubuntu or mandriva? this is the question? [10:47] ubuntu [10:47] hfhf: same as: !tell _username_ about _topic_ [10:47] ranger, try adding 'post-up dhclient ath0' to the end of the ath0 section. [10:47] mandriva seems like it's dead === Siniestro [n=letaldar@190.38.152.192] has joined #ubuntu [10:48] actually a wrong place to pose such questions === koshea [n=ronny@71-36-207-81.eugn.qwest.net] has joined #ubuntu [10:48] SuSE is great, it has a cool repair system, if you destroy your linux... === zorro [i=zoral@zoral.bsnet.se] has joined #ubuntu [10:48] hi, can anyone help me with setting up a wireless connection in ubuntu? its not connecting and i cant figure out why [10:49] hfhf: aktiwers deema salim stay on topic or join #ubuntu-offtopic for those topics [10:49] am I the only one who didn't like the feel of opensuse? [10:49] gah, hibernate is _really_ broken for me, just corrupted my gnome completely [10:49] what about archlinux? did any of you use it? === somerville32 [n=ubuntu@fctnnbsc15w-156034072235.nb.aliant.net] has joined #ubuntu [10:49] ok [10:49] I'm now in ubuntu LiveCD, does ubuntu has an option, where it tries to repair my system? like repair-install?? [10:49] Przemcio78: join #ubuntu-offtopic === somerville32 [n=ubuntu@fctnnbsc15w-156034072235.nb.aliant.net] has left #ubuntu ["Leaving"] === thomas_ [n=thomas@CPE001109d74891-CM000a739b277d.cpe.net.cable.rogers.com] has joined #ubuntu === hipityhop [n=denis@c211-30-65-244.belrs1.nsw.optusnet.com.au] has joined #ubuntu [10:49] hi, can anyone help me with setting up a wireless connection in ubuntu? its not connecting and i cant figure out why === zorro [i=zoral@zoral.bsnet.se] has joined #ubuntu === RxDx [n=RODRIGO@201-74-134-179-sj.cpe.vivax.com.br] has joined #ubuntu [10:50] About my java problem.. I have read that info, but stell dont seam to understand what is wrong. How do I copy code here without breaking the rules? === gmhikin03 [i=Greg@pool-209-158-28-73.alt.east.verizon.net] has joined #ubuntu [10:50] koshea: what does iwconfig say? [10:50] !wireless > koshea [10:50] koshea: try iwlist eth1 scanning (or eth0 or wlan0, whatever your wlan device is) [10:50] hi guys, i found a strange bug, when i try to assign my preferred application for a file by right-clicking - then "preferences" - "open with" i cant set the point e.g. for an avi file to open with mplayer. the black dot is still at gstreamer. i also have a problem with editing the menu. sorry for bad english, please help! [10:51] mc44: it says on eth0 unassociated and then the ESSID of my network and all [10:51] salim, that works and it shows all the networks including mine [10:51] oops.. im in the wrong channel.. lol sorry === allen2003 dances === binyamin [n=binyamin@74.131.99.212] has joined #ubuntu [10:51] hey guys, i'm having a problem with ubuntu's banshee package. First run, everything goes smoothly, but the second time trying to run banshee, it freezes at the point where it says "Initalizing background tasks" Any solution to this problem? === TomB_ [n=ownthebo@host217-44-7-4.range217-44.btcentralplus.com] has joined #ubuntu [10:51] I'm on livecd because ubuntu stuck in last boot-process, does it has a log file anywhere, so I can at least see why and where he stopped? === aktiwers [n=aktiwers@217.116.239.2] has left #ubuntu ["Leaving"] === oslo [n=oslo@82.225.102.119] has joined #ubuntu [10:51] anyone else have problems with their laptop battery and edgy? === DreamThief3 [n=mathias@dslb-084-058-150-109.pools.arcor-ip.net] has joined #ubuntu [10:51] !anyone [10:51] A large amount of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? [10:52] thomas_, run it from a command line and note the output. [10:52] for some reason no networks show up in the list in the gnome network manager [10:52] salim: if you can access the drive with ubuntu on, the relevant logs should be in /var/log [10:52] I keep getting Couldn't find package beryl when trying to apt-get install, any ideas? [10:52] why is my laptop battery not being recognized at times? [10:52] i can't find the 'totem-xine-firefox-plugin' does it exist in edgy? [10:52] koshea: is a bug [10:52] SeAofSaRo, you need to add the repo. [10:52] hi guys, i found a strange bug, when i try to assign my preferred application for a file by right-clicking - then "preferences" - "open with" i cant set the point e.g. for an avi file to open with mplayer. the black dot is still at gstreamer. i also have a problem with editing the menu. sorry for bad english, please help! [10:53] which logfile is it, there are so many in var log [10:53] gyaresu: the update doesn't do that, do I specify it somehow? [10:53] (Banshee:17983): Gnome-WARNING **: Accessibility: failed to find module 'libgail-gnome' which is needed to make this application accessible [10:53] salim: well kern.log may be a good start === mirak [n=mirak@AAubervilliers-152-1-24-75.w83-114.abo.wanadoo.fr] has joined #ubuntu === abdusabri [n=eng_abdu@213.212.193.27] has joined #ubuntu [10:53] i guess there's my answer. [10:53] SeAofSaRo, Are you following a howto? [10:53] why it wasn't packaged with it is beyond me. === sk1nny [n=skinny@213-208-104-74.dyn.gotadsl.co.uk] has joined #ubuntu [10:53] ya, somewhat [10:53] is there a reason that the ubuntu mozilla-thunderbird package doesnt provide an icon for thunderbird? i assume it has something to do with the debian non-free-art thing, but thats no reason to not have any icon at all [10:53] !bootstrap.log [10:53] Sorry, I don't know anything about bootstrap.log - try searching on http://bots.ubuntulinux.nl/factoids.cgi [10:53] SeAofSaRo, I could tell you but if you don't know then you really shouldn't be hacking your system... === froggi_ [n=denis@c211-30-65-244.belrs1.nsw.optusnet.com.au] has joined #ubuntu [10:54] is there a way to not have syslog clobbered by dropped paquets messages from the kernel ? same for dmesg [10:54] salim: or syslog [10:54] ? [10:54] anyone here play warsow? === slimz [n=slimz@209.167.30.186] has joined #ubuntu === Staz [n=staz@IRC-MAFIA.net] has left #UBUNTU ["Leaving"] [10:54] the last time he logged was 3 hours ago, when I was still able to boot successfully === R0cK3T [i=rkt@d209-89-30-55.abhsia.telus.net] has joined #ubuntu === ^Ocean^ [n=russ@74.12.96.14] has joined #ubuntu [10:55] hey does anyone know if its easy or what work would be involved to get ubuntu up and running on an ibm r30 laptop, and get it onto a windows domain? === R0cK3T [i=rkt@d209-89-30-55.abhsia.telus.net] has left #ubuntu [] [10:55] salim: syslog or kern.log? === graveson [n=graveson@212.71.37.80] has joined #ubuntu [10:55] <^Ocean^> is there any programs to capture movies with my Webcam ? i found several that will capture an image, but nothing that will do like a .avi or mpg movie [10:55] gyaresu: i haven't been on ubuntu in a while, I'm back at the point where I'm confused about most things === Boe1 [n=BROKER@u-126-242.adsl.univie.ac.at] has joined #ubuntu === QueenNALA [n=bnahla@82.201.237.213] has joined #ubuntu [10:56] what do you use now? [10:56] salim: and where is the boot failing? [10:56] where can i go to find out if a certain piece of hardware is supported on ubunu [10:56] SeAofSaRo, Yeah, I kind of got that feeling. Try and make it stable rather than beta testing is my opinion. [10:56] *ubuntu [10:56] syslog has also no usefull infos about last boot === M0E-lnx [n=moe@adsl-70-240-108-184.dsl.hstntx.swbell.net] has joined #ubuntu === the-mr-freak [n=chris@pD9E0B8A7.dip.t-dialin.net] has joined #ubuntu [10:56] I dunno, all log files are too old [10:56] !hardware > graveson [10:56] is beryl in beta? [10:56] SeAofSaRo, yes. === brownedwg89 [n=Brownie@c-68-46-136-171.hsd1.pa.comcast.net] has joined #ubuntu [10:56] they arent about the last unsuccessfull boot [10:56] I just heard about it last night when I was looking at edgy, seems cool [10:56] !hardware [10:56] For lists of supported hardware on Ubuntu see: https://wiki.ubuntu.com/HardwareSupport === mirak [n=mirak@AAubervilliers-152-1-24-75.w83-114.abo.wanadoo.fr] has joined #ubuntu [10:56] salim: yes, but what is the problem with booting? === TIger_IT [n=Tiger_IT@OL65-184.fibertel.com.ar] has joined #ubuntu === hipitihop [n=denis@c211-30-65-244.belrs1.nsw.optusnet.com.au] has joined #ubuntu [10:57] it stops when he shows ubuntu splash screen (I screwed up my ntfs partition) === boxahy [n=box_@WS-ESR1-72-49-83-11.fuse.net] has left #ubuntu ["Leaving"] [10:57] I already tried uncommenting the ntfs line in /etc/fstab, but it didnt help [10:57] graveson, you can just /msg uboto for yourself or redirect (>) it to someone else === M0E-lnx [n=moe@adsl-70-240-108-184.dsl.hstntx.swbell.net] has joined #ubuntu === jono [i=jono@conference/ubuntuconf/x-a98b57f1e8acaf85] has joined #ubuntu [10:58] salim: do you get a bootloader menu to chose what to boot into? === Determinist [i=deter@unaffiliated/determinist] has joined #ubuntu [10:58] graveson, *ubotu === sixmokes [n=frank@fw-ext2.netenterprise.net] has joined #ubuntu [10:58] does anyone think edgy was a crap upgrade? === SCHNUPPI [n=SCHNUPPI@c-24-15-69-225.hsd1.il.comcast.net] has joined #ubuntu [10:59] y0 [10:59] for all my niggas in da hood [10:59] check it out === charon [n=charon@p5085717D.dip.t-dialin.net] has joined #ubuntu [10:59] !language > hfhf [10:59] i got a problem with synaptic [10:59] every time i try to use it === Siniestro [n=letaldar@190.38.152.192] has joined #ubuntu [10:59] it crashes [10:59] yes I get into the grub menu [10:59] is that because i set a root password? [10:59] <^Ocean^> is there any programs to capture movies with my Webcam ? i found several that will capture an image, but nothing that will do like a .avi or mpg movie [10:59] maybe grub problem? [10:59] salim: have you tried rcovey mode opton? [10:59] then I choose ubuntu, it shows ubuntu splash screen with little orange in the status bar and then it doesnt do anything, it doesnt even need a second [11:00] what is recovery mode option? === Boe1 [n=BROKER@u-126-242.adsl.univie.ac.at] has left #ubuntu [] === SCHNUPPI is now known as jewslolwtclol [11:00] hi could anyone help me with getting my wireless to work? and please dont just PM me to the man page, i need some help figuring out how to debug it because im not getting a connection nor am i getting any messages as to why (afaik) === hipitihop [n=hipitiho@c211-30-65-244.belrs1.nsw.optusnet.com.au] has joined #ubuntu [11:00] salim: in the list there should be two ubuntu options, one which says recovery mode? [11:01] koshea, Where are you up to so far? [11:01] hola [11:01] i installed FrostWire and it says i have a firewall installed... it was working on my other kubuntu install with nothing different with the router === srf21c [n=seth@ip72-201-117-218.ph.ph.cox.net] has joined #ubuntu [11:01] !hello > Siniestro [11:01] i havent tried it yet, I will try although I dont think it will help [11:01] any ideas? i installed firestarted and enabled 6346 but that didn't make a difference === bradley [n=bradley@bas3-montreal02-1096691242.dsl.bell.ca] has joined #ubuntu === Zarephath [n=zarephat@cpe-72-181-22-100.houston.res.rr.com] has joined #ubuntu [11:01] *firestarter [11:01] gyaresu, i entered my ssid and WEP key into the networking administration panel [11:01] gyaresu, and it said it was brining up the interface [11:01] gyaresu, but its not connected [11:02] Anyone point me to a PowerPC specific channel for Ubuntu? [11:02] koshea, phone call. sorry. === booger [n=booger@cpe-65-185-64-83.neo.res.rr.com] has joined #ubuntu [11:02] i once had that problem [11:02] try rebooting [11:02] your computer [11:02] gyaresu, well thanks anyhow, if you get a chance and you could PM me after your call that would be great [11:02] testing...this is my first time configuring Gaim for IRC. === ala [n=ala@wireless.cs.Dal.Ca] has joined #ubuntu [11:03] I guess no password is needed? [11:03] wo liegt denn die olle httpd.conf in ubuntu von apache, in /etc/apache2 hats zwar eine, aber die ist praktisch leer, da muss es also noch ein alternatives file haben [11:03] !de | kaktuspalme [11:03] kaktuspalme: Deutschsprachige Hilfe fuer Probleme mit Ubuntu, Kubuntu und Edubuntu finden Sie in den Kanaelen #ubuntu-de, #kubuntu-de, #xubuntu-de und #edubuntu-de === hipitihop [n=hipitiho@c211-30-65-244.belrs1.nsw.optusnet.com.au] has joined #ubuntu === gtoman [n=gtoman@c-67-182-164-35.hsd1.ca.comcast.net] has joined #ubuntu [11:03] when using the irc.ubuntu.com server? [11:03] WAS IST EINE HTTPD CONFIG? [11:03] i am trying to install edgy on a sunfire v40z... it installs, but on reboots it crashes...any idea why? [11:03] can't get ekiga to see my webcam please help... [11:03] WHAT IS IRC.UBUNTU.COM [11:03] ??? === Mez [n=Mez@ubuntu/member/mez] has joined #ubuntu [11:03] !caps | jewslolwtclol [11:03] jewslolwtclol: PLEASE DON'T SHOUT! We can read lowercase too. [11:03] koshea, will do. clients... [11:03] how long is recovery mode going to take === YogSothoth_ [n=john@lns-bzn-44-82-64-99-25.adsl.proxad.net] has joined #ubuntu [11:03] jewslolwtclol: irc.ubuntu.com is an IRC server (well, an alias to one) === TheGateKeeper [n=gatekeep@82-36-112-78.cable.ubr03.king.blueyonder.co.uk] has joined #ubuntu [11:04] that's the irc server that shows up by default in GAIM when you configure an IRC "account" [11:04] jewslolwtclol: and httpd config is probably the configuration file for an HTTP (Web) server [11:04] it says the following: "/bin/sh: can't access tty; job control turned off" [11:04] rob: nalioth: ping === ogra [i=ogra@ubuntu/member/ogra] has joined #ubuntu === mode/#ubuntu [+o apokryphos] by ChanServ === jewslolwtclol [n=SCHNUPPI@c-24-15-69-225.hsd1.il.comcast.net] has left #ubuntu [requested] === mode/#ubuntu [+b *!*@c-24-15-69-225.hsd1.il.comcast.net] by apokryphos === mode/#ubuntu [-o apokryphos] by apokryphos [11:04] apokryphos: thanks === mef [n=mef@pD957C80D.dip0.t-ipconnect.de] has joined #ubuntu [11:05] is there a way to not have IPTABLES polluting the syslog and kernel log ? [11:05] hey has anyone had any luck installing the nvidia driver from the repositories under Ubuntu 6.10? === meheren [n=meheren@140-34.8-67.swfla.res.rr.com] has joined #ubuntu === godmachine81 [n=ulteo-us@71.31.6.88] has left #ubuntu [] === godmachine81 [n=ulteo-us@71.31.6.88] has joined #ubuntu [11:05] Mine choked while trying to load the linux-headers for the 386 kernel. [11:05] hi! could someone help me fixing cpufreq? it seems that cpufreq doesn't set governors corrct... === cntb [n=aya@85-250-30-165.bb.netvision.net.il] has joined #ubuntu === hipitihop [n=hipitiho@c211-30-65-244.belrs1.nsw.optusnet.com.au] has joined #ubuntu === dr0ne [n=fn@CABLE-72-53-45-212.cia.com] has joined #ubuntu [11:05] i have all the necessary modules loaded [11:05] Look like 6.10 loads 686 kernel by default now... [11:05] anyone have any luck installing edgy on an amd64? === menko [n=menko@203-100-223-232.jetbuster.co.nz] has joined #ubuntu === sk1nny is now known as sk1nny|away [11:05] cpufreq installed === zliners [n=slkdjfs@d54C1D09C.access.telenet.be] has joined #ubuntu === andy_ [n=andy@adsl-70-228-81-191.dsl.akrnoh.ameritech.net] has joined #ubuntu [11:05] hi all === blake6489 [n=blake@90-216-58-66.gci.net] has joined #ubuntu [11:06] srf21c: linux-headers? then it isn't the one from the repositories... === wayne_ [n=wayne@196.22.155.51] has joined #ubuntu [11:06] this was not the case when I run running dapper 6.06, I have to load the 686 kernel packages myself. [11:06] HI, how do I get gnome-volume-manager to open things with thunar instead of nautilus? [11:06] but my pentium-m still runs in full 1,73GHz === PhilKC [i=greece@about/linux/staff/philkc] has joined #ubuntu [11:06] sup all === der_daniel [n=daniel@pD9E1176A.dip0.t-ipconnect.de] has joined #ubuntu [11:06] help recovery mode says: "mounting /root/dev on /dev/.static/dev failed: No such file or directory" === sc0tty_ [n=yann@ARennes-257-1-144-186.w86-210.abo.wanadoo.fr] has joined #ubuntu [11:06] i am looking for someone who knows alot about java [11:06] ./sys/devices/system/cpu/cpu0/cpufreq/scaling_governor contains 'ondemand' [11:06] plzz pm me [11:07] PhilKC: and I only just got back in. These same people on before I left, and still around, it seems :) [11:07] I dunno, I tried an aptitude install nvidia-glx and nvidia-kernel-source === james296 [n=james@70.44.38.34.res-cmts.mlf.ptd.net] has joined #ubuntu === Justin_ [n=Justin@225.121.55.255.guam.net] has joined #ubuntu === Justin_ [n=Justin@225.121.55.255.guam.net] has left #ubuntu ["Leaving"] [11:07] apokryphos: yes? === hipitihop [n=hipitiho@c211-30-65-244.belrs1.nsw.optusnet.com.au] has joined #ubuntu [11:07] the nvidia packages kept trying to install the linux-headers-2.6.17-10-386 [11:07] nalioth: see just above, where I banned. He's still on the network. [11:07] srf21c: i don't think you need nvidia-kernel-source, just install nvidia-glx === godstand2 [n=bill@adsl-75-23-44-111.dsl.lgvwtx.sbcglobal.net] has joined #ubuntu [11:08] HELLO [11:08] hey, how do I turn off or hide all the messages about people entering and leaving the room in GAIM? === pitti [i=pitti@ubuntu/member/pitti] has joined #ubuntu [11:08] hello godstand [11:08] WHO IS ROOM MONITOR === andy_ [n=andy@adsl-70-228-81-191.dsl.akrnoh.ameritech.net] has left #ubuntu ["Leaving"] [11:08] !caps | godstand2 [11:08] godstand2: PLEASE DON'T SHOUT! We can read lowercase too. [11:08] godstand2: please dont shout [11:08] !caps | godstand2 === sigger [n=ubuntu@pool-68-162-8-54.nwrk.east.verizon.net] has joined #ubuntu [11:08] sorry caps got stuck [11:09] why cant I run Quake4 when I installed the latest stable version of my Nvidia graphics card driver? it always brings me back to the login screen === mocho [n=guill3rm@189.174.129.251] has joined #ubuntu [11:09] !ops | godstand2 [11:09] godstand2: Help! Keybuk, mdz, Amaranth, tritium, ajmitch, crimsun, ogra, CarlK, Seveas, Burgundavia, apokryphos, thoreauputic, nalioth, Madpilot, ompaul, rob, Hobbsee, imbrandon, DBO or gnomefreak! === mode/#ubuntu [+o LjL] by ChanServ [11:09] segfault: ? === ala_ [n=ala@wireless.cs.Dal.Ca] has joined #ubuntu [11:09] how do i play music bought from the iTunes music store on Rythembox? [11:09] godstand2: use lowercase. what's the problem? [11:09] segfault: it's an honest mistake [11:09] i am now === CypherBIOS [n=cypher@ubuntu/member/cypherbios] has joined #ubuntu [11:09] meheren, the iTunes music might be DRMified. [11:09] well? [11:09] apokryphos, ? [11:10] nalioth, what is? [11:10] segfault: only in emergencies, please :) [11:10] segfault: you called the ops for a reason. godstand2 told us why he was speaking in caps, it was an honest mistake [11:10] apokryphos, he was not calling us - he was answering a question :-) [11:10] I know, and still -- it should only be used in emergencies :) [11:10] srf12c, DRMified? [11:10] apokryphos, oh the ubotu ops, he asked who was channel monitor i was showing him [11:10] nalioth, godstand2 did ask who is room monitor .... [11:10] segfault: recommend something like /cs access #channel list in the future :) [11:10] somebody please tell me how to suppress all these status messages re: people entering and leaving the room! [11:10] there sure is alot of ppl here [11:10] segfault: if someone asks for ops, please !tell NICK about ops instead of !ops [11:11] anyway, now it's full of "room monitors" watching. what's the problem godstand2? [11:11] nalioth, thx === mode/#ubuntu [-o LjL] by LjL [11:11] is there a way to not have IPTABLES polluting the syslog and kernel log ? [11:11] i am trying to install edgy on sunfire v40z...it installs but fails to boot...anyone can point me in the right direction?? [11:11] i was just wondering caus i was kicked before [11:11] well? [11:12] Anyone here thad can help me with java copilation ? === roll [n=sdsd@red-corp-201.143.151.174.telnor.net] has joined #ubuntu [11:12] i am a barber and had to do a haircutt [11:12] godstand2: please join us in #ubuntu-ops [11:12] I started recovery mode and now I am in initramfs, what can I do now? === engwnbie [n=engwnbie@74.12.40.189] has joined #ubuntu [11:12] barber === hipitihop [n=hipitiho@c211-30-65-244.belrs1.nsw.optusnet.com.au] has joined #ubuntu [11:12] how can I avoid rewrite prompt when using cp === Salah__ [n=Salah@217-11-225.0505.adsl.tele2.no] has joined #ubuntu [11:12] i tried with -f [11:12] how do i play music bought from the iTunes music store on Rythembox? [11:12] still, prompts for overwrite === hipitihop [n=hipitiho@c211-30-65-244.belrs1.nsw.optusnet.com.au] has left #ubuntu [] [11:14] oops === sigger [n=ubuntu@pool-68-162-8-54.nwrk.east.verizon.net] has left #ubuntu [] === _TomB [n=tomb@host217-44-7-4.range217-44.btcentralplus.com] has joined #ubuntu [11:15] ow can I avoid rewrite prompt when using cp [11:15] i tried with -f === h1st0 [n=histo@adsl-75-36-112-138.dsl.bcvloh.sbcglobal.net] has left #ubuntu ["Google] [11:15] can i buy muisc from iTunes busic store on linux? and how do i play it? [11:15] *music [11:15] <^Ocean^> is there any programs to capture movies with my Webcam ? i found several that will capture an image, but nothing that will do like a .avi or mpg movie === pitti_ [i=pitti@nat/google/x-fa709d493b5ad93b] has joined #ubuntu === cbgb [n=chris@p549FD80C.dip.t-dialin.net] has joined #ubuntu === Apollo [i=wallason@c-71-194-81-247.hsd1.il.comcast.net] has joined #ubuntu [11:16] hehe === joshin [n=joshin@unaffiliated/joshin] has joined #ubuntu [11:16] hi *, anyone out there with lircd knowledge? [11:17] #x === TLE [n=Kenneth@217.74.211.14] has joined #ubuntu === beuno [n=martin@68-155-114-200.fibertel.com.ar] has joined #ubuntu [11:17] how can I avoid rewrite prompt when using cp === TLE [n=Kenneth@217.74.211.14] has left #ubuntu [] [11:17] roll, if anyone knows then they will tell you === MetaMorfoziS [n=sajt@3e44b654.adsl.enternet.hu] has joined #ubuntu === sharperguy [n=sharp@88-109-37-236.dynamic.dsl.as9105.com] has joined #ubuntu === NeoEcoS [n=NeoEcoS@201.244.127.6] has joined #ubuntu === thombone_ [n=thombone@cpe-76-170-57-31.socal.res.rr.com] has joined #ubuntu === aro-ron [n=aaron@host-216-249-122-36.wireless.southern.edu] has joined #ubuntu === lostinc [n=richard@pool-71-121-91-63.eriepa.dsl-w.verizon.net] has joined #ubuntu [11:20] roll: what do you mean by a "rewrite prompt"? [11:20] hey all, I need some more help in fixing my ubuntu install after reinstalling it === krecik177 [n=krecik17@fgu186.internetdsl.tpnet.pl] has joined #ubuntu [11:20] aro-ron: fixing what? [11:21] most everything is working fine, but I cannot seem to get my Thunderbird profile to restore back into the new install of thunderbird === enkidu [n=gilles@82.235.26.179] has joined #ubuntu [11:21] it wont read the profile, and I cant figure out why [11:21] aro-ron: perhaps the permissions are wrong [11:21] can i buy muisc from iTunes music store on linux? and how do i play it? [11:21] mc44: how can I check those? === ubuntu_ [n=ubuntu@62.14.153.199] has joined #ubuntu [11:22] meheren: three lettters. DRM [11:22] you "could", but why should you? [11:22] aro-ron: right click on the file then properties, then permissions tab [11:22] buy your music from somewhere that doesn't force you to get reamed by sony :) === ChaKy [n=chaky@21-123.dsl.iskon.hr] has joined #ubuntu [11:23] Is there a large difference between distros designed for the i3286 and those designed for the i686 [11:23] lostinc: some [11:23] the latter will be a bit faster === Admiral_Chicago [n=freddy@66.99.72.2] has joined #ubuntu === elkbuntu [i=melissa@ubuntu/member/elkbuntu] has joined #ubuntu [11:23] I've decided to get Ubuntu, yay! === bokey [n=unknown@203.192.95.61] has joined #ubuntu [11:24] lostinc: but you can get an i686 kernel for ubuntu === godstand2 [n=bill@adsl-75-23-44-111.dsl.lgvwtx.sbcglobal.net] has left #ubuntu ["Leaving"] [11:24] Now tell me which version I should be getting :D [11:24] does that change it over? === stalin [n=dw@stud212148.studentenheim.uni-tuebingen.de] has joined #ubuntu [11:24] What about all the software compiled for i386 that is already installed [11:24] helo everyone. === pixil [n=pixel@82-43-117-187.cable.ubr01.mort.blueyonder.co.uk] has joined #ubuntu === saintshakajin [n=broly@cust-82-133.dsl.versateladsl.be] has joined #ubuntu [11:24] anyone got Ubuntu running running from a persistant live install on a usb drive? o_0 === porkpie__ [n=mark@cpc1-bsfd5-0-0-cust929.cmbg.cable.ntl.com] has joined #ubuntu === Vaske_Car [n=igrice@d57-59-78.home.cgocable.net] has joined #ubuntu === fuffe [n=Fuffe@c-8393e455.26-0164-74657210.cust.bredbandsbolaget.se] has joined #ubuntu === Vaske_Car [n=igrice@d57-59-78.home.cgocable.net] has left #ubuntu [] === james296 [n=james@70.44.38.34.res-cmts.mlf.ptd.net] has joined #ubuntu [11:25] hey, I have an issue.. [11:25] hi guy's ....does the install of apache2 create a www group by default === ChaKy [n=chaky@21-123.dsl.iskon.hr] has joined #ubuntu === zenrox [n=zenrox@pool-71-115-219-183.spknwa.dsl-w.verizon.net] has joined #ubuntu [11:25] What package do I need to setup the "X includes"? Trying to compile gnash for PPC so I can see flash stuff... [11:26] Do I get the DVD release or the CD release? === yock [n=myockey@pdpc/supporter/active/Yock] has joined #ubuntu [11:26] Whichever you want really Trixsey [11:26] can someone help me launching Quake 4? I JUST installed the latest nvidia driver for this, its lookin great, but when I launch Quake 4 it goes back to the logon screen automatically [11:26] I have installed apache2 using the apt-get install but I don't see any www group [11:26] Music_Shuffle: the difference being? === rexbinary [n=rexbinar@unaffiliated/rexbinary] has joined #ubuntu [11:26] can i buy muisc from iTunes music store on linux? and how do i play it? === josue_ [n=josue@27.pool85-49-199.dynamic.uni2.es] has joined #ubuntu === moose5435 [n=turkey@adsl-157-91-88.int.bellsouth.net] has joined #ubuntu [11:26] I've no idea, the DVD ver probably has more preinstalled stuff? [11:26] meheren: use banshee === Carnage\ [n=CarNagE@dslb-084-057-247-100.pools.arcor-ip.net] has joined #ubuntu === stalin [n=dw@stud212148.studentenheim.uni-tuebingen.de] has joined #ubuntu [11:26] lupino_85, what does DRM stand for...? [11:26] Trixsey: CD has the default install DVD has extra packages which are not installed === saintshakajin [n=broly@cust-82-133.dsl.versateladsl.be] has joined #ubuntu [11:26] thomas_, ok thx [11:27] or perhaps a player that doesn't require mono === jarppi [n=jarppi@addr-82-128-237-144.suomi.net] has joined #ubuntu [11:27] !tell meheren about restricted formats === Hello_Kitty__ is now known as acidjames [11:27] The CD version works well, so I've never messed with the DVD. Just manually install whichevre others you need. [11:27] mc44: those extras anything worth installing? [11:27] mc44: checked permissions, and made sure they were set to me, but it still wont work, wont load the profile [11:27] HI, how do I get thunar to open directories when media is inserteed instead of nautilus (apart from moving the nautilus in bin)? [11:27] since I installed kde on ubuntu by writing apt-get install kde-desktop, I've got an issue in the gnome environment. It doesn't appear any turnoff or restart buttons when you click at the red power button in the upper right corner [11:27] Trixsey: well if there is anything you want you can install it over the internet anyway [11:27] Trixsey: If you need them, you'll end up installing them anyways, if not, you'll end up removing them anyways. [11:27] Zarepath, thx [11:27] yeah [11:27] WELL??? [11:27] meheren:np [11:27] Trixsey: so its not worth getting the DVD unless you have bas bandwidth [11:27] k === skreet [n=skreet@25p-f.inforonics.com] has joined #ubuntu [11:28] sorry but this is really annoying me and I need a response [11:28] my sound doesnt respond when I try to change the volume with my media keys, had this before, remember the fix was easy, but cant remember what I did, any ideas? [11:28] I'm downloading in 1.3MB/s from one of Ubuntus mirrors [11:28] so bandwidth is okay [11:28] but I'll jsut go with the CD [11:28] aro-ron: sorry dont know then [11:28] tired of all extras in windows as it is :P === Amaranth [i=travis@conference/ubuntuconf/x-291d96dffd4d16b6] has joined #ubuntu [11:28] Heh. CD's aren't all out of date! ^^ [11:28] Anyone using the new gnome on ubuntu yet? :D === Khale1 [n=khaled@host-84-9-33-153.bulldogdsl.com] has joined #ubuntu [11:29] I installed kde on ubuntu by writing apt-get install kde-desktop, I've got an issue in the gnome environment. It doesn't appear any turnoff or restart buttons when you click at the red power button in the upper right corner [11:29] fuffe: that's because you're using kdm rather than gdm now === Amaranth [i=travis@ubuntu/member/amaranth] has joined #ubuntu [11:29] nalioth: What do I need to do to get the X includes so I can compile gnash for ppc? [11:29] skreet- New gnome? [11:29] dpkg-reconfigure gdm and change back to gdm as defaulr; that should fix it [11:30] <^Ocean^> how can i get pppoe to not Nuke my /etc/resolv.conf with the pppoe dns settings ? Everytime i connect to the internet i gota reset that file the way i want it [11:30] lupine_85, ahh [11:30] thanks for the info [11:30] np [11:30] mikm[laptop] , -- 2.16, i think. [11:30] skedgy uses 2.16 === gyaresu [n=gyaresu@124.243.140.29] has joined #ubuntu [11:30] skreet: edgy uses 2.16 [11:31] got a question regarding passwords and general ubuntu weirdness if anyone's got a minute (I might be doing something really stupid, so it might take a minute) if anyone's up for it? [11:31] mc44, maybe im just out of date? [11:31] !ask | Khale1 [11:31] Khale1: Don't ask to ask a question. Just ask your question :) [11:31] skreet- Oh. I thought you were talking about a beta or something [11:31] skreet: are you running edgy [11:31] yea === zliners [n=slkdjfs@d54C1D09C.access.telenet.be] has left #ubuntu [] [11:31] how can ii tell what version of gnome i have then [11:31] Zarephath: search in synaptic for xorg and install the -dev pkgs [11:31] skreet: then you have the lastest gnome :) woo! [11:32] nalioth: Kewl thanks [11:32] skreet: System -> About Gnome [11:32] hmm [11:32] i thought 2.16 was new [11:32] any way to use the gnome default art vs the ubuntu [11:32] skreet: it is [11:32] ah ok sweet :). Basically I recently got an r100 toshiba. Now the r100 doesn't have a cd or other optical drive so I installed ubuntu using winlux (it had windows preinstalled) [11:32] nalioth: actually I will just apt-cache search xorg then install ;-) === killalby [n=killalby@adsl-240-250.38-151.net24.it] has joined #ubuntu [11:32] skreet: not newer than 2.18 === shira [n=shira@ppp-70-250-145-86.dsl.rcsntx.swbell.net] has joined #ubuntu === aluno [n=aluno@liict7.ctclab.ufsc.br] has joined #ubuntu [11:33] fox linux [11:33] :) [11:33] MemTotal: 1946424 kB [11:33] w00tza0tl2323t === foo [n=foo@unaffiliated/foo] has left #ubuntu [] === MetaMorfoziS [n=sajt@3e44b654.adsl.enternet.hu] has joined #ubuntu === killalby [n=killalby@adsl-240-250.38-151.net24.it] has left #ubuntu ["ciao] [11:33] MemTotal: 131072 kB :( [11:33] everything went well except I installed beryl and everything's screwed up. I can't even access anything as root. The password which is the same as my normal login doesn't work for some reason === joshika [n=tom@d54C23FCD.access.telenet.be] has joined #ubuntu [11:33] lupine_85: now, now this isnt a contest :p [11:33] haha [11:34] *mulch* [11:34] Hi, when I try to boot using the 386 kernel, I get a "no screen found" error, but this doesn't happen if I use the "generic" one. Any ideas why? === cbgb [n=chris@p549FD80C.dip.t-dialin.net] has left #ubuntu ["Leaving"] [11:34] there's only one password for the main user and root, so anything that requires admin rights comes up with an incorrect password === allen2003 [n=allen@203.84.184.246] has joined #Ubuntu [11:34] lupine_85, mine has 7 digits [11:34] yours has 76 [11:34] ack 6 ;) [11:34] hello how to play mp3 with ubuntu xD [11:34] anyone have any idea how to reset things? === sgp_ [n=steve@host86-139-57-97.range86-139.btcentralplus.com] has joined #ubuntu [11:34] 1,946,424 [11:34] how to play mp3? [11:34] Khale1, you don't have a root password, so it's not the same as your normal user's - it's just that your normal user is a member of the "admin" group, and as such can use "sudo", which gives it root privileges [11:34] Ubotu, please tell Khale1 about root === erider [n=erider@unaffiliated/erider] has joined #ubuntu === runpain [n=bill@adsl-75-23-44-111.dsl.lgvwtx.sbcglobal.net] has joined #ubuntu === erider [n=erider@unaffiliated/erider] has left #ubuntu ["I] [11:34] yeah sudo doesn't work [11:35] !mp3 > allen2003 [11:35] Ubotu, please tell allen2003 about mp3 [11:35] that's where I'm going with it === lostinc [n=richard@pool-71-121-91-63.eriepa.dsl-w.verizon.net] has left #ubuntu [] [11:35] hello again [11:35] Khale1, don't know why this would have happened, but perhaps you're not a member of admin anymore. try typing "groups" and see if "admin" is listed [11:35] !mp3 [11:35] For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats [11:35] -_- === rambo3 [n=stone123@c-caf871d5.027-6-6b73641.cust.bredbandsbolaget.se] has joined #ubuntu [11:35] restricted === Inazad [n=inazad@c207.134.229-59.clta.globetrotter.net] has joined #ubuntu [11:35] duh === existance [n=existanc@cpe-24-242-205-133.houston.res.rr.com] has joined #ubuntu [11:35] mp3!=free software [11:35] or sudo is broken. it's easy to kill === sol90 [n=eric@d206-116-125-128.bchsia.telus.net] has joined #ubuntu [11:35] when I type in groups, khaled adm dialout cdrom floppy etc and admin all come up [11:36] O.o [11:36] really sudo can be broken??? How do I fix it? [11:36] msg nickserv register iamhis [11:36] Khale1: then i guess lupine_85 is right and sudo is broken. what happens when you try "sudo true"? [11:36] mp3 restricted? [11:36] runpain: might want to change your password there [11:36] what palyer i can use for mp3? === inferiorpotassiu [n=inferior@63.204.151.5] has joined #ubuntu [11:36] allen2003, AmaroK is nice. [11:36] runpain: forgot a / ? [11:36] ok [11:36] Real Users seta root password just in case [11:36] amarok === pitti_ [i=pitti@nat/google/x-d8c333eb8fc4c562] has joined #ubuntu [11:36] allen2003: real men use lame [11:36] runpain, do your experiments in the *status window*, not in the channel. now, by typing the wrong command (you needed a slash) in the channel, we all saw your password [11:37] what is the apt package for mathematica fonts? [11:37] dude! all these IRC messages of poeple entering and leaving the room is driving me crazy. Anyone know a command to these messages off? [11:37] lol lame === guerby [n=guerby@gut75-4-82-235-162-148.fbx.proxad.net] has joined #ubuntu === existance [n=existanc@cpe-24-242-205-133.houston.res.rr.com] has joined #ubuntu [11:37] im a little boy ;_; [11:37] srf21c, Depends on your client. [11:37] inferiorpotassiu: use apt-cache search [11:37] asks me for the password and then obviously tells me it's a failed attempt [11:37] pianoboy3333: i've done that already [11:37] I'm using GAIM w/ EDGY [11:37] after three goes [11:37] srf21c, Check preferences, I really dont know [11:37] oooooppps [11:37] /quit all these messages [11:37] pianoboy3333: that's why i am here, because i've already tried google and apt-cache search... === aluno preparando pra dar upgrade no pc da facul... [11:37] inferiorpotassiu: ttf-bitstream-vera? === aluno is now known as BrodocK [11:37] now i got to change psw === rcmiv [n=rcmiv@24-247-115-50.dhcp.klmz.mi.charter.com] has joined #ubuntu === Viperhoot [n=viperhoo@190.41.85.208] has joined #ubuntu [11:37] runpain: definitely [11:38] mmmmaaaannn [11:38] is there any way of starting everything fresh and installing ubuntu again as with winlux? [11:38] on gentoo there's a package called mathematica-fonts, nothing like that is available on ubuntu? [11:38] always happens to me as a newbie === lupine_85 hax0rz runpain [11:38] and, i already have that font set on this computer [11:38] good job it's not your email password as well... or I'd 0wn j00r msn :p [11:38] Lemme dig around again real quick. . Prefs for IRC on GAIM seem somewhat limited. [11:38] inferiorpotassiu: doubt it... if you can get the source from the gentoo repositories, you can use the font files === Viperhoot [n=viperhoo@190.41.85.208] has left #ubuntu [] [11:38] Khale1: i don't even know what winlux is honestly and couldn't find many references to it... but anyway, you should be able to start Ubuntu in recovery mode and get root. from there, you can check what's going wrong with sudo... not sure what it could be honestly [11:38] srf21c: get xchat if you want fuller functionality === Admiral_Chicago [n=freddy@66.99.72.2] has joined #ubuntu [11:39] pianoboy3333: i guess that's how it'll have to be, but i'd kind of expect that some people use mathematica and ubuntu...? === meheren [n=meheren@140-34.8-67.swfla.res.rr.com] has joined #ubuntu === menko [n=menko@203-100-223-232.jetbuster.co.nz] has left #ubuntu [] [11:39] pianoboy3333: it's a much uglier solution to use another operating system's files, especially if an existing solution is there [11:39] yeah, thought about xchat. I'm a minimalist though, and I'd hate to install another program just to run IRC. [11:39] so i got problem on limewire [11:39] inferiorpotassiu: it may be out there, you have to look harder [11:39] the readme said i need to put java inside the folder [11:39] so where can i find java [11:39] srf21c: ah I thought the linux philosophy was do one thing and do it well :) [11:40] ah worry winlux is an exe that basically you load from windows ( i had it installed on the machine first) and from there it basically reboots the machine (changes grub I guess) and allows you to install ubuntu without an optical medium. [11:40] !java [11:40] To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository === totall_6_7 [n=Freaky@c-67-189-91-111.hsd1.or.comcast.net] has joined #ubuntu [11:40] starts it off with a text based interface and downloads all the packages there and then [11:40] should be something similar for ubuntu right? [11:40] from ubuntu I mean === clearzen [n=clearzen@proxy01.ss.usu.edu] has joined #ubuntu === menko [n=menko@203-100-223-232.jetbuster.co.nz] has joined #ubuntu [11:41] ello peeps === fabbione [n=fabbione@vpn-nat.fabbione.net] has joined #ubuntu [11:42] mc44: I spose that is the unix philosphy. Maybe there is a good command line IRC client in the Edgy repos that someone can recommend? [11:42] i make a bobo how i change pass word [11:42] srf21c: irissi [11:42] can anyone point me in the right direction of a howto that actually works with kiba-dock? Or even kxdocker. [11:42] Anyone here know where I can get freenx for ubuntu? It isn't in the default repositories. [11:42] !help === Shadowpillar [n=Shadow@dialup-4.233.127.27.Dial1.LosAngeles1.Level3.net] has joined #ubuntu [11:42] I am ubotu, all-knowing infobot. You can browse my brain at http://bots.ubuntulinux.nl - Usage info: http://wiki.ubuntu.com/UbuntuBots [11:42] i haven't been able to get either working [11:42] actually it's called instlux (http://sourceforge.net/projects/instlux) [11:42] sorry about that === hipitihop [n=hipitiho@c211-30-65-244.belrs1.nsw.optusnet.com.au] has joined #ubuntu [11:42] aaarrrrrggghhh === JosefK [n=brett@82-42-147-9.cable.ubr01.sprt.blueyonder.co.uk] has joined #ubuntu [11:43] joshin: check the ubuntu guide for dapper [11:43] http://ubuntuguide.org/wiki/Ubuntu_dapper [11:43] thanks srf21c! === theCore [n=alex@modemcable128.255-131-66.mc.videotron.ca] has joined #ubuntu [11:43] there a section in there about how to install it. No prob === flodine [n=flodine@c-24-4-174-71.hsd1.ca.comcast.net] has joined #ubuntu === rekahsoft [n=rekahsof@node-1386.tor.pppoe.execulink.com] has joined #ubuntu === Bany [n=banana01@82-41-249-243.cable.ubr01.linl.blueyonder.co.uk] has joined #ubuntu === Zarephath breathes a sigh..actually compiling gnash for PPC flash support.. [11:43] freenx rulz, you can even run it over SSH for tight security. [11:44] is there any way to change permissions on large groups of files at once? or do I have to do it one by one? [11:44] althought you cannot share desktop sessions like you can using vino. === collin_ [n=rekahsof@node-1386.tor.pppoe.execulink.com] has joined #ubuntu === citr0n [n=jko@62.79.77.47.dhcp.aaa.tiscali.dk] has joined #ubuntu [11:44] runpain: (not in this channel) use /msg nickserv set password yourpasswordhere [11:44] I'm trying to install the opencrome drivers on my laptop but it is telling me that I have conflict with xserver-xorg-driver-via. I am running edgy. Does anyone know how I could get around this? Can I safely Remove xserver-xorg-driver-via? [11:44] Is there anything special needed for Onboard Intel chipsets? [11:45] can someone help me remove the ubuntu logo in taskbar [11:45] srf21c: Its fine. I don't need to share. Actually the goal is to have multiple people share one machine so sharing is bad. :) [11:45] A freind has a problem. [11:45] clarifcation, you cannot share a desktop session with the *console* like you can using vino === collin_ [n=rekahsof@node-1386.tor.pppoe.execulink.com] has left #ubuntu ["Leaving"] === phillipc [n=reformis@c-69-138-236-176.hsd1.md.comcast.net] has joined #ubuntu === Ash-Fox [i=UNKNOWN@fgd182.internetdsl.tpnet.pl] has joined #Ubuntu === hipitihop [n=hipitiho@c211-30-65-244.belrs1.nsw.optusnet.com.au] has joined #ubuntu [11:45] ok thanks [11:45] 'I am on Ubuntu but there are ugly lines moving through the screen vertically.' === SonicvanaJr [n=Garrett@unaffiliated/sonicvanajr] has joined #ubuntu [11:45] 'Also, it's not filling out my whole screen.' === srf21c is now known as Set1 [11:45] He uses onboard Intel graphics [11:45] I'm attempting to install the latest nxclient on edgy via dpkg -i and getting error: "nxclient depends on libstdc++2.10-glibc2.2; however: Package libstdc++2.10-glibc2.2 is not installed." can someone please help me resolve ? [11:45] Any pointers? === TobiG [n=tobias@60.234.80.50] has joined #ubuntu === CarNagE__ [n=CarNagE@dslb-084-056-253-034.pools.arcor-ip.net] has joined #ubuntu === vasilis [n=vasilis@82-32-128-198.cable.ubr05.hawk.blueyonder.co.uk] has joined #ubuntu === jason [n=jason@219-89-202-222.adsl.xtra.co.nz] has joined #ubuntu === TobiG [n=tobias@60.234.80.50] has left #ubuntu ["Leaving"] === CarNagE__ is now known as Carnage_\ [11:46] hi,question what happened to inittab,what replaced it? [11:46] hipitihop: build your own [11:46] that's the only real solution [11:46] clearzen, : You can but will probably kill X in the process...better to edit /etc/inittab and change runlevel to 3..reboot and then proceed... === totall_6_7 [n=Freaky@c-67-189-91-111.hsd1.or.comcast.net] has joined #ubuntu [11:46] You might try init 3 after changing the inittab [11:46] I have a bootsplash problem. Whenever I restart/shutdown my computer, instead of the bootsplash, this crazy purple screen appears. There are a few 1 pixel high holes through which I can see part of the bootsplash though. I don't know what to do to get rid of this and it's really bothering me because it's really ugly. Any ideas? [11:46] how can i remove the ubuntu logo in edgy taskbar? === fuffe [n=Fuffe@c-8393e455.26-0164-74657210.cust.bredbandsbolaget.se] has left #ubuntu ["Lmnar"] [11:47] Zarephath: how so I need to edit /etc/inittab? [11:47] vasilis: https://launchpad.net/products/upstart/+ticket/1984 === santeria[FL] [n=infectio@ip24-170-193-114.ga.at.cox.net] has joined #ubuntu [11:47] flodine: you mean in the menu bar or main menu? === dibblego [n=nobody@wireless-031.wireless.cse.unsw.EDU.AU] has joined #ubuntu [11:47] !startup [11:47] To add programs to start up when you log into your Gnome session https://help.ubuntu.com/community/AddingProgramToSessionStartup === orkid [n=orkid@bas1-barrie18-1242377354.dsl.bell.ca] has joined #ubuntu [11:47] why do I get 403 Forbidden responses when I apt-get update? [11:47] ok i got the 64 bit text installer but i have no idea how to partition my hard driver [11:47] damn how to remove ubuntu on my firefox start page [11:47] hard drive [11:47] strabes yes [11:48] damn how to remove ubuntu on my firefox start page <-- [11:48] strabes in dapper it was a command === hipitihop [n=hipitiho@c211-30-65-244.belrs1.nsw.optusnet.com.au] has joined #ubuntu [11:48] clearzen, : Sorry if you don't know what I'm talking about better to just leave it alone..along with the clearcrome or whatever...what you are attempting can potentially render X unusable [11:48] allen2003, with the firefox preferences [11:48] mc44: i tried to run rc3 to kill the bloody X but woudn't do anything.. [11:48] on where [11:48] flodine: i didn't know you could 'remove' it per se. you could replace it with a transparent .png - i know how to do that === srf21c [n=seth@ip72-201-117-218.ph.ph.cox.net] has joined #ubuntu [11:48] allen2003, look for it - you will find it === SunFish7 [n=SunFish7@cpc4-oxfd1-0-0-cust870.oxfd.cable.ntl.com] has joined #ubuntu [11:48] vasilis: are you on edgy? [11:48] o.o im looking for almost 3 nights now === Spec is now known as Spec[x] [11:48] mc44: yeah [11:48] I have a bootsplash problem. Whenever I restart/shutdown my computer, instead of the bootsplash, this crazy purple screen appears. There are a few 1 pixel high holes through which I can see part of the bootsplash though. I don't know what to do to get rid of this and it's really bothering me because it's really ugly. Any ideas? [11:49] strabes i just want the footprint back [11:49] vasilis: it uses a fun new replacement for init called upstart [11:49] allen2003, edit-preferences [11:49] Zarephath: I can live without x for a while. I'm sure I could repair any damage I do. I just haven't edited that file before. what section do I need to edit? [11:49] flodine: do you have the footprint .png? [11:49] edit preferences? === totall_6_7 [n=Freaky@c-67-189-91-111.hsd1.or.comcast.net] has joined #ubuntu [11:49] ok i got the 64 bit text installer but i have no idea how to partition my hard drive [11:49] strabes: try passing vga=077 or someting like that to your kernel [11:49] strabes no [11:49] vasilis: how do i do that? [11:49] vasilis: see upstart.ubuntu.com [11:49] so has anyone been able to get the nvidia-glx and nvidia-glx and nvidia-kernel-source packakges properly install on Edgy? [11:49] strabes no cammand [11:49] nalioth: I came across a sticky in the PPC forum talking about a bug in the smp kernel for powerpc..it this good information? As I have a PowerPC dual and am currently running the smp kernel without issue [11:49] allen2003, click Edit, then click Preferences === alban_ [n=alban@m110.net81-64-74.noos.fr] has joined #ubuntu [11:49] mc44: cheers man === lupine_85 did :D === pianoboy3333 [n=alex@ool-43567d61.dyn.optonline.net] has left #ubuntu ["Leaving"] === Drudwyn [n=themando@80-43-35-147.dynamic.dsl.as9105.com] has joined #ubuntu [11:50] clearzen, : Ok all you need to do is look for...ummm just a sec [11:50] ah [11:50] ok tnx [11:50] hey there! [11:50] sudo apt-get install linux-restricted-modules-$(uname -r) nvidia-glx [11:50] strabes: when you are in the grub boot menu try pressing the e button and add it [11:50] problem solved [11:50] flodine: then how do you expect to change it to the foot if you don't have a png to change it to? you can see my blog post about this here: http://strabes.wordpress.com/2006/10/16/change-the-menu-bar-logo-on-ubuntu-dapper/ [11:50] when I try to install the nvidia packages, apt keeps trying to load the 386 kernel headers. And fails. === Rodrigo21 [i=rodrigo_@200.72.82.177] has joined #ubuntu [11:50] Zarephath: as am I. no issues at all [11:51] Zarephath: of course, i'm on dapper still [11:51] ok i got the 64 bit text installer but i have no idea how to partition my hard drive<<<---- [11:51] thanks lupine, I'll try that right now. That's not going to roll my kernel back to 386, is it? [11:51] Anyone: Suggestions for help with integrated intel graphics? [11:51] strabes: i am not sure about the 077 though, [11:51] vasilis: ok i'll look it up [11:51] thanks though [11:51] nalioth: Ok thanks...yeah this was an older post about dapper actually.... === hipitihop [n=hipitiho@c211-30-65-244.belrs1.nsw.optusnet.com.au] has joined #ubuntu [11:51] anybody? === Tampler [n=falafel@83.142.21.168] has joined #ubuntu [11:51] clearzen, : give me another second..I have to fire up my PC... [11:52] Zarephath: That's fine. Thank you for the help [11:52] edgy, using compiz how do I load a new plugin? [11:52] srf21c: no it wont. [11:52] Zarephath: If it breaks I just made a backup of my system anyway [11:52] kewl. [11:52] whenever i try to partition the biggest section (~180 gb) no matter what value i put, it doesnt do anything' [11:53] i must say edgy is a bit buggy.. [11:53] srf21c: (iz a bug https://launchpad.net/distros/ubuntu/+source/linux-restricted-modules-2.6.17/+bug/68621) [11:53] clearzen, : Heh thats the spirit... [11:53] alright, the install finished. What's the command to enable the nvidia drivers again? I forgot the exec is three or four words long. [11:53] vasilis: its not too bad === pozdiy [n=pozdiy@138.26.54.178] has joined #ubuntu [11:54] mc44, yes it is.. but it is edgy isnt it [11:54] Ok so am I fscked up here or what...isn't inittab in edgy? === Admiral_Chicago [n=freddy@66.99.72.2] has joined #ubuntu [11:54] had a few problems with my wifi card,problems with the bluetooth,and the nvidia gf7400...No sound as well.. [11:54] jason: its all relative :p [11:54] anyone know of a good guide for ipw3945 === lullabud [n=lullabud@12.24.42.67] has joined #ubuntu [11:55] i've got the driver and module loaded, etc. [11:55] vasilis: well thats your fault for having annoying hardware :p [11:55] no eth1/ra0 === bradley_ [n=bradley@bas3-montreal02-1096691658.dsl.bell.ca] has joined #ubuntu [11:55] mc44:, that's for digging up the documentation. [11:55] whenever i try to partition the biggest section (~180 gb) no matter what value i put, it doesnt do anything any ideas? [11:55] Hey guys, when I try to reload Synaptic, I get an error message, saying repository might no longer be available or could not be contacted. I've got full signal and can access the web, and it's happening everytime... [11:55] and now this new upstart thingy...What's the problem with sysv? [11:55] mc44, not saying its any thing big just the little things.... like always scanning a fat32 partition on every boot by default [11:55] can anyone suggest what might be up with it? [11:55] I was following the steps in the Ubuntu guide for Edgy, and was a little bewildered when the install choked. [11:55] vasilis: upstart isnt buggy :p its event based, which means it can handle hotplug on bott and so forth === Rodrigo21 [i=rodrigo_@200.72.82.177] has left #ubuntu [] === ChaKy [n=chaky@21-123.dsl.iskon.hr] has joined #ubuntu [11:56] mc44: hotplug?That's obsolete === flaco [n=flaco@201.215.201.127] has joined #ubuntu [11:56] ok, I found the command to enable the nvidia driver sudo nvidia-glx-config enable [11:56] Drudwyn: Have you added custom repositories? Maybe one has got wrong url. [11:56] clearzen, : I stand corrected...it appears you can do init followed by the runlevel..on most linux systems a init 3 puts the system to boot to login prompt..after logging in a init 5 would be issued to put it back to startx..however I am not 100% sure about the default runlevels in Ubuntu..so better ask first [11:57] vasilis: mean hotplugging tings in raher tan uing hotplug :p itsall udev now :) === pitti_ [i=pitti@nat/google/x-d8c333eb8fc4c562] has left #ubuntu ["bye"] [11:57] I haven't, it even threw the same message after install [11:57] vasilis: wow lost lots of keys there [11:57] why do I get 403 Forbidden responses when I apt-get update? [11:57] mc44: eitherway i've seen distrols like suse that do that using sysv [11:57] and it failed! Results: Error: your X configuration has been altered. [11:57] This script cannot proceed automatically. If you believe that this [11:57] not correct, you can update the md5sum entry executing the following [11:57] command: [11:57] md5sum /etc/X11/xorg.conf | sudo tee /var/lib/x11/xorg.conf.md5sum [11:57] otherwise edit manually /etc/X11/xorg.conf to change the Driver section [11:57] from nv to nvidia. === zen [n=zen@cc1120507-a.zwoll1.ov.home.nl] has joined #ubuntu [11:57] hi all... when I try to run vnc or DrScheme, show me this error Warning: Unable to load any usable ISO8859 font --- any ideas/ [11:57] ? [11:57] mc44: i got your point [11:57] vasilis: upstart is a more elegant solution [11:57] srf21c: please use a pastebin next time [11:58] going to try manually editing xorg.conf then rebooting. Last time I did this it choked trying to load the GDM thought. See y'all in a bit. [11:58] yeah, sorry nalioth, I'm brand new to IRC. DIdn't know it was going to do that. [11:58] Zarephath: I'll try it out...I'll get it to run eventually. I have heard that ubuntu handles run level differently. But I don't know because I haven't delt with them much. Other than to shutdown and reboot === collin_ [n=rekahsof@node-1386.tor.pppoe.execulink.com] has joined #ubuntu [11:58] flaco: font problems are common when connecting to remote machines. search for that font and install it. [11:59] flaco: try `apt-cache search ISO8859` === hemal [n=hemal@ool-45729245.dyn.optonline.net] has joined #ubuntu [11:59] mc44: is it mature enough?I don't see volkerding using it ;) [11:59] nalioth: I'm using GAIM for IRC client too, so I'm not sure if pastebin is a feature on this client. [11:59] BRB === srf21c [n=seth@ip72-201-117-218.ph.ph.cox.net] has left #ubuntu [] [11:59] clearzen, : Well like I said once you know the runlevel to boot to prompt and then back to X all you have to issue is sudo init then you can work on unistalling the via stuff and adding whatever back in.. [11:59] pastebin isn't a client feature.. [11:59] looking for a little help, i've been trying to install beryl on edgy and have added lots of repos from many guides [11:59] Zarephath: Thanks again [12:00] does anyone have the original list of repositories? [12:00] vasilis: well its not exactly what you would call mature, oit was written in the 4 months before edgy :P but it is surprisingly bug free === afasias [n=giannis@87.203.181.194] has joined #ubuntu === Latty [n=Latty@host86-132-246-75.range86-132.btcentralplus.com] has joined #ubuntu === dandy_m [n=crawler@203.177.202.207] has joined #ubuntu [12:00] whenever i try to partition the biggest section (~180 gb) no matter what value i put, it doesnt do anything any ideas? === The_Belgain [n=chatzill@thebelgain.plus.com] has joined #ubuntu === Amaranth [i=travis@conference/ubuntuconf/x-16d89e02142e95bc] has joined #ubuntu [12:00] clearzen, : NP I have had lots of people help me as well...glad I had a little bit of information at least... [12:00] !tell hemal about repos [12:00] nope, gb, archive and security.ubuntu/~ all fail === numist [i=numist@unaffiliated/numist] has joined #ubuntu