[12:01] <mezziah> if the default filesystem on fedora is not ext3, someone may correct me
[12:01] <citiskyline_> mezziah, how would I geet the partition_device?
[12:01] <Ayarcy> joe4444: Do you have a backup of the Edgy version of the menu.lst file (like you did for /etc/fstab)?  That'd be an easy way to tell.
[12:01] <Bassetts> does anyone know how I can remove the hidden partition on my HDD that is not in fstab from Places>Computer
[12:01] <LinAsH> mezziah, it is
[12:01] <mezziah> citiskyline_: if i know.. you can try /dev/hda1/2/3,..
[12:02] <citiskyline_> ok
[12:02] <joe4444> Ayarcy: no, i didn't back up that file :(  would (sd1,0) be a valid option?
[12:02] <erUSUL> citiskyline_: it depends :) if you are triying to access an ubuntu partition fstype is ext3 (vfat is for fat32 and ntfs for winXP) partition_device is in feisty something like /dev/sda3 or the like
[12:03] <tck> Bassetts, what does mount say, anything showing?
[12:03] <Ayarcy> joe4444: Here's what I suggest.  Listen closely, then reboot.
[12:03] <joe4444> Ayarcy: i think the install of Edgy was smooth b/c i didn't install the IDE hard drive until after installing Edgy
[12:03] <joe4444> k
[12:03] <Bassetts> tck, it is not mounted, it has no mount point, it shows up in Places>Computer as unmounted and if i try and open it i have to enter my pass
[12:03] <Ayarcy> joe4444: When you get the failure, type "e".  That'll let you edit the grub commands you're using to boot.
[12:04] <Ta1> Anybody know how to setup a game controller in Wine?
[12:04] <tck> Bassetts, what type of partition is it, ext3? ntfs? was it mounted before?
[12:04] <Ayarcy> joe4444: The first one is probably the "(hd1,0)" line.  Use "e" again to edit that line.
[12:04] <tobias> Hi.
[12:04] <Bassetts> tck, it is ntfs
[12:04] <Ayarcy> joe4444: Then you can backspace over parts of the line and tab-complete the possible correct answers.
[12:04] <tck> Bassetts, you want to delete it altogether?
[12:04] <Bassetts> tck, since install it has had no mount point as i do not want it to show
[12:04] <Bassetts> tck, no it is my recovery partition
[12:05] <tobias> My user can't acess the partition sda03/ hence the user root only has the rights to it. What should I do?
[12:05] <Ayarcy> joe4444: You should be able to tab-complete for both numbers.  There should be only a small number of combinations to try.
[12:05] <tobias> sda3*
[12:05] <tck> Bassetts, thought so, dell or ibm have that
[12:05] <Ayarcy> joe4444: And if one fails, you can always use the "e" commands again to try something else.
[12:05] <joe4444> Ayarcy: so if i change that line from (hd1,0) to (hd,0) then try tab-complete on "d" it should give me valid choices?
[12:05] <Bassetts> tck, its a lenovo laptop
[12:05] <booyah> ./server 208.185.81.231  OR!  ./server irc.talkingirc.net./server 208.185.81.231  OR!  ./server irc.talkingirc.net./server 208.185.81.231  OR!  ./server irc.talkingirc.net./server 208.185.81.231  OR!  ./server irc.talkingirc.net
[12:05] <booyah> ./server 208.185.81.231  OR!  ./server irc.talkingirc.net./server 208.185.81.231  OR!  ./server irc.talkingirc.net./server 208.185.81.231  OR!  ./server irc.talkingirc.net./server 208.185.81.231  OR!  ./server irc.talkingirc.net
[12:05] <Ayarcy> joe4444: When you get the right line, remember it and come back.
[12:06] <LinAsH> tobias, what is the fs type?
[12:06] <Ayarcy> joe4444: Not quite.
[12:06] <joe4444> Ayarcy: what about (sd1,0) instead of (hd1,0) ?  seems like maybe it's looking at the IDE hdd instead of the SATA hdd
[12:06] <tobias> LinAsH: how do I check that?
[12:06] <Ayarcy> joe4444: I think you have to delete the rest.  So tabbing on "(hd" will give the first numbers.
[12:06] <joe4444> i'll see what i can come up with
[12:06] <Ayarcy> joe4444: I'm not sure there are any "(sd" lines that are valid.
[12:06] <joe4444> thanks
[12:07] <Ayarcy> joe4444: But you can try it.
[12:07] <joe4444> i'll be back... hopefully sooner than later
[12:07] <charleseddy> all:  here to help :D
[12:07] <Ayarcy> joe4444: I say try that.  Hopefully you boot okay and can come back in for the permanent fix.
[12:07] <LinAsH> tobias, it's in /etc/fstab post it on http://paste.ubuntu-nl.org
[12:08] <tck> well Bassetts im not sure, i know you can prob. go into the config editor somehow and do it that way
[12:09] <tck> Bassetts, or even disable the protection for it in the BIOS and just have ubuntu on it
[12:09] <Bassetts> tck, i have looked cant find it
[12:09] <Bassetts> tck, disbale protection? I want to keep the partition
[12:09] <madhatter349> hey
[12:09] <tck> Bassetts, ok ok
[12:09] <tck> Bassetts, give me min, i'll try looking :)
[12:09] <madhatter349> what program should i use for my ipod in linux
[12:10] <BigToe7000> amarok
[12:10] <Bassetts> tck, thanks
[12:10] <tck> mad_goldfis1, gtkpod
[12:10] <PriceChild> !ipod | madhatter349
[12:10] <ubotu> madhatter349: For information on how to sync and add tracks to your iPod, see the guide at https://help.ubuntu.com/community/IPodHowto See !rockbox for information on liberating your iPod
[12:10] <LinAsH> madhatter349, rhythmbox or amarok work fine
[12:10] <madhatter349> thanks
[12:10] <madhatter349> what about gtkpod
[12:11] <wimpies> anybody here that knows how to verify an mp3 file without playing it ?
[12:12] <tck> Bassetts, Applications -> System Tools -> Configuration Editor -> apps -> nautilus -> desktop and unchecked "volumes_visible"
[12:12] <Gerrit> wimpies: I use mpg321 output to /dev/null
[12:12] <Gerrit> wimpies: mpg321 -s file.mp3 >/dev/null IIRC
[12:12] <wimpies> gerrit : what do you get when you have problems ?
[12:13] <TheVault> What is Wine-Doors?
[12:13] <Ayarcy> joe4444: Good news or bad news?
[12:13] <joe4444> Ayarcy: (hd0,0) worked :)
[12:13] <mezziah> TheVault: it's some frontend for wine.. it installs some applications automatically
[12:13] <Gerrit> wimpies: Error messages, I suppose.
[12:13] <Gerrit> I don't know really.
[12:13] <mezziah> like internet explorer, steam, world of warcraft,..
[12:13] <TheVault> mezziah: Is it worth downloading and using?
[12:13] <wimpies> ok should try this then thx
[12:13] <Gerrit> wimpies: If it can be played but the sound is not correct, then hearing it should be the only way.
[12:13] <Mike_F> Hello: has anyone got Ubuntu running on a Itanium 64 system?
[12:14] <mezziah> TheVault: well i tested it but didnt get everything working
[12:14] <Ayarcy> joe4444: Okay, so at this point you have to do that every boot.  Are you in the Fiesty now (and not the Live CD)?
[12:14] <joe4444> Ayarcy: any idea why the Feisty install would use hd0 per my choice but then configure grub to boot hd1?
[12:14] <mezziah> TheVault: you can take a look on it though
[12:14] <wimpies> well sound is ok but it seems the song just terminates
[12:14] <Bassetts> tck, does that not remove the icon for any removeable media?
[12:14] <TheVault> mezziah: Yeah I watched a video on it and i'm like this looks alot like wine but with a GUI
[12:15] <Ayarcy> joe4444: No, I'm not sure why it does that.  I had a Dapper Server do that to me a week ago.  I just know how to fix it.  :-)
[12:15] <joe4444> Ayarcy: yeah real Feisty not live cd... i just edit /boot/grub/menu.lst to make it permanent?
[12:15] <Bassetts> tck, the volume is still in Places>Computer
[12:15] <Ayarcy> joe4444: Not quite.  That won't persist across kernel upgrades.
[12:15] <tck> well yes, but you can always create a new icon launcher for dvd  etc.. on desktop
[12:15] <tck> right click on desktop etc..
[12:15] <mezziah> TheVault: yes, at present it's nothing more than a gui for wine, it's just a 0.1pre.. i didn't expect much and well, it worked as expected
[12:15] <Ayarcy> joe4444: Open the file in an editor.  I assume it has "(hd1,0)" all over it?
[12:15] <crater> hi
[12:16] <TheVault> mezziah: Oh I see. Thanks for the help, I'll keep tabs on this program though :D
[12:16] <jrib> tck: ext3 doesn't keep track of creation time
[12:16] <crater> is this a helproom about ubuntu??
[12:16] <joe4444> Ayarcy: yeah... # groot=(hd1,0)     ...and the 3 menu options
[12:16] <mezziah> crater: yes, it is
[12:16] <ChrisNor> ok
[12:16] <jrib> crater: yep! just ask your question
[12:16] <ChrisNor> hi
[12:17] <TheVault> crater: Yuppers, been helped alotta times here with my questions :D
[12:17] <wlfR> LinAsH, vill I be able to update the album art to kind of scan?
[12:17] <crater> fantastic folk
[12:17] <tck> jrib, so when running a command to find files older than 7 days
[12:17] <tck> it doesn't work at all?
[12:17] <tck> or does it use modify/access time
[12:17] <Ayarcy> joe4444: Right, that's the trick.  You need to change that line (that looks like a comment), not the stuff below.
[12:17] <jrib> tck: it uses what you tell it to :)
[12:17] <LinAsH> wlfR, not in Rhythmbox, amarok can do it though
[12:18] <Ayarcy> joe4444: Then you run (as root) update-grub and look at the file again.
[12:18] <jrib> tck: http://www.brandonhutchinson.com/ctime_atime_mtime.html
[12:18] <tck> jrib, but for arguments sake, i create a file today and i want to change it so it was created 7 days ago
[12:18] <tck> is it possible?
[12:18] <wlfR> LinAsH, what are you using because I didn't work for me with amarok either
[12:18] <wlfR> and i couldn't copy cd's with amarok
[12:18] <Ayarcy> joe4444: That file is auto-generated by update-grub based on the line "# groot="
[12:18] <jrib> tck: you can't change the creation time because that information isn't stored
[12:19] <tck> jrib, i read that, but i thought some clever people in here might know a trick ;)
[12:19] <Ayarcy> joe4444: Well, based on other lines too, but that's the one we're talking about.  :-)
[12:19] <LinAsH> wlfR, well I just don't care very much about cover, since I usually not looking at it when listening ;)
[12:20] <joe4444> Ayarcy: i see, got it updated now... so for future reference, i can avoid this problem as long as there is only 1 hdd during installation?
[12:20] <tck> jrib, so i guess using the find command with +mtime +7 uses ctime attributes on wether its 7 days old :/
[12:20] <ihateusernames> hi
[12:20] <tck> jrib, shit i meant +mtime +mtime
[12:20] <jrib> tck: well that checks the last time it was modified
[12:20] <tck> ok
[12:20] <crater> is there some help in spanish?
[12:20] <Ayarcy> joe4444: Not necessarily (and you aren't done yet).  I had one hd, but I partitioned it weird.  Mine defaulted to "(hd0,0)" but I needed "(hd0,2)"
[12:20] <jrib> crater: /join #ubuntu-es
[12:20] <TaJMoX> !sp | crater
[12:20] <ubotu> Sorry, I don't know anything about sp - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[12:20] <crater> about ubuntu i mean
[12:21] <TaJMoX> !es
[12:21] <ubotu> Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[12:21] <wlfR> LinAsH, that's true but it's nice when I'm gonna use it as a music station!
[12:21] <bronze-> Why can't I sit on teamspeak and listen to XMMS at the same time! "Sound card blocked"
[12:21] <wlfR> and rythmbox has "party mode"
[12:21] <joe4444> Ayarcy: ok, but as long as i don't do any manual partitioning it shouldn't cause any issues?
[12:21] <TheVault> Another quick question. Is there a manager or something so you can change the default icon that comes with Ubuntu. That orange logo that when you click, you get a menu. Yes, I already went to the usual location or where its suppose to be and replace it but that don't work or is not working.
[12:22] <LinAsH> wlfR, I think amarok automatically use the cover.jpg file inside an album folder
[12:22] <Ayarcy> joe4444: The last step is to install grub into the mbr using the new config.  Use "sudo grub-install /dev/sda" (or whatever device you boot from).
[12:22] <wlfR> no it's folder.jpg? but I don't want to download them myself :P
[12:22] <bronze-> Why can't I sit on teamspeak and listen to XMMS at the same time! "Sound card blocked"
[12:22] <ihateusernames> when i insert a CD in my drive, it reads it, but 2 min later, it doesnt recognize, No media in drive, and i need to restart for it to read again, are there any known problems for this?
[12:22] <crater> thank you folk
[12:22] <crater> i found it
[12:22] <Ayarcy> joe4444: I think that's true, yes.  But I can't confirm it, really.  Just seems that way.
[12:22] <feathers> Hey guys, what do I need to install in order to have the db command?
[12:22] <crater> wwoowwwwwwwwww
[12:22] <feathers> I need to create a db file
[12:22] <crater> thanks and bye
[12:23] <Ayarcy> joe4444: And then you might want to reboot to try it out.
[12:23] <tck> ihateusernames, check cd for errors (also try burning disk at slower speed) do other cd's have this issue
[12:23] <jellington> Hi Everyone, I used synaptic to install the jdk and netbeans but I can't seem to figure out where the class path is set? does anyone know where I should dump extra classes so that I can develop with them with ubuntu installed this way?
[12:23] <ihateusernames> yea, i tried 2 CDs
[12:23] <lo4fer> i have a proprietary cable modem/wireless router from my isp that only assigns 5 ips through DHCP: 192.168.0.10 through 192.168.0.14 is there any way that 1) I can reconfigure it to assign more IPs (I've searched high and low in the menus but can't find any such option, so I'm thinking not) and 2) assuming that I cannot, is it possible for me to assign a machine a static ip outside the DHCP range, for example 192.168.0.55, and have it be a
[12:23] <ihateusernames> the CD's are burned on the same drive just in Windows
[12:23] <tck> ihateusernames, theres an option when you boot with ubuntu cd to check for defects
[12:23] <Ayarcy> joe4444: If that doesn't work, maybe your BIOS is set to try to boot from the IDE drive, so you might need to do "sudo grub-install /dev/hda" or whatever that device is.
[12:23] <joe4444> Ayarcy: this doesn't seem right...
[12:23] <tck> let it run - see what happens
[12:24] <Ayarcy> joe4444: What doesn't?
[12:24] <Iradigalesc> anyone have a Lexmark P4350 working in Ubuntu?
[12:24] <joe4444> http://rafb.net/p/H0Yz9G39.html
[12:24] <tck> ihateusernames, yeah Ayarcy has a good point there
[12:25] <ihateusernames> hold on, I dont need to boot fromt he CD
[12:25] <joe4444> Ayarcy: when i switched from (hd1,0) to (hd0,0) it worked b/c feisty was installed to my SATA drive, so that must mean the SATA drive is hd0 and the IDE drive is hd1, right?  now this tells me the opposite
[12:25] <tck> Iradigalesc, Lexmark doesn't make a driver for the P4350 - try http://linuxprinting.org/
[12:25] <Keanu> Hello? Can someone give me support please? ^^
[12:25] <ihateusernames> Linux is already installed
[12:25] <mon^rch> am wondering if anyone can help me get "vkeybd" working properly... for some reason it doesn't output sound. any ideas?
[12:25] <ihateusernames> just normal CD's with songs and files wont read
[12:25] <Keanu> Can I go into PM with someone please?
[12:25] <BrianG> anyone know why Quod Libet won't run? i get an error "ImportError: No module named formats/oggvorbis"
[12:25] <Ayarcy> joe4444: What tells you the opposite?
[12:25] <tck> ihateusernames, ahh have no idea mate
[12:26] <LinAsH> Keanu, just ask your question here
[12:26] <Keanu> Ah okay.
[12:26] <joe4444> Ayarcy: that paste is the output from sudo grub-install /dev/sda
[12:26] <Keanu> Well, iv just installed Linux ubuntu server
[12:26] <Keanu> And my friend gave me a lil code to type in
[12:26] <jrib> !enter | Keanu
[12:26] <ubotu> Keanu: Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation!
[12:26] <Keanu> Sorry
[12:26] <Ayarcy> joe4444: Oh, I see.
[12:27] <blackest> does anyone know how to configure make so it picks up the includes for the current kernel
[12:27] <Keanu> I just installed linux ubuntu server, and my friend gave me a lil code to type in. To like.. Create a gui?... But iv forgotten the code to type in. Can anyone tell me it?
[12:27] <mon^rch> Keanu: sudo apt-get install ubuntu-desktop
[12:27] <jrib> Keanu: do you want a full GNOME desktop?
[12:27] <Keanu> Thank you! <3
[12:28] <Keanu> Thats the code! <3
[12:28] <tck> Keanu startx
[12:28] <Keanu> Thank you very much.
[12:28] <Ayarcy> joe4444: Hmm..  You're right that it doesn't seem to make sense.  If it were me, I'd install grub to both drives with the current config and try rebooting.  Maybe we're just missing something.
[12:28] <Iradigalesc> is it very difficult to configure apache and allow access to everyone from the Internet?
[12:28] <TheVault> I wanna be able to change the start menu icon, the default orange one. Iv done what everyone has currently said and go to the /usr/share/icons/hicolor/48x48/ and replace the distributor-logo.png with the image I want and then refresh the panel. I did that. Then I was told to go where the themes are and go into the current theme Im currently use and find it in there. Iv tried everything but it won't let me change the start menu icon
[12:28] <TheVault> and I really want to change it to complete my theme
[12:28] <Keanu> :3 Thank you all!
[12:29] <joe4444> Ayarcy: i think i'll just disable the IDE drive in my BIOS and try to install Feisty on the SATA drive again... then hopefully i can just enable the IDE and it will work right away like it did when i first added it
[12:29] <LinAsH> Iradigalesc, it's the default behavior
[12:29] <tck> TheVault, right click on start menu icon and click edit
[12:29] <tck> may work
[12:29] <CNTRLX> Hello
[12:29] <TheVault> tck: I'll be able to change the orange icon from there?
[12:29] <mon^rch> am wondering if anyone can help me get "vkeybd" working properly... for some reason it doesn't output sound. any ideas?
[12:29] <tck> TheVault, not sure, at least eliminate that option
[12:29] <Ayarcy> joe4444: Your call, of course.  But IMO you're very close to having it working.
[12:29] <Keanu> Thanks agian
[12:29] <Keanu> Bye all!
[12:30] <TheVault> tck: Lol thats funny
[12:30] <robdeman> oh man
[12:30] <robdeman> my Fiesty installation is falling apart
[12:30] <Iradigalesc> LinAsH: And at which page I need to go to access it?
[12:30] <TheVault> tck: Nope nothing under there
[12:30] <LinAsH> Iradigalesc, the web repository is /var/www
[12:30] <robdeman> first for some random reason my soundcard stopped being detected.. this caused Gnome to crash after loggin in... now my MySql server is dead...
[12:30] <tck> TheVault, are you sure it can be changed?
[12:31] <CNTRLX> when burning a debian cd with k3b that is 890mb do i burn it with TAO?
[12:31] <robdeman> I haven't had any similar problems ever so far with Edgy or Fedora Core 6
[12:31] <snake> what can i use to convert avi to mpeg
[12:31] <tck> TheVault, http://ubuntuforums.org/showthread.php?p=2841579
[12:31] <TheVault> tck: Yes, Iv seen many many many screenshots and people have it changed. Like some people have the Mac OS X look going on, so I see the blue apple. Iv seen some people with the Windows Vista Theme(which I'm almost complete with doing) and they have the Windows Vista orb there
[12:32] <joe4444> Ayarcy: probably, but since it only takes 15 minutes or so i'd rather start with a fresh install that works the first time... if you don't see me again, then it worked as expected this time :)
[12:32] <joe4444> thanks again
[12:32] <Iradigalesc> LinAsH: Yes, at /var/www I store the files and I access to http://localhost to see them. But if I go to an other computer on the Internet, I can't access to the files of my computer
[12:32] <TheVault> tck: Yup, iv been to that one as well and nothing works
[12:32] <tck> TheVault, install M$ :P
[12:32] <Ayarcy> joe4444: Glad to help.
[12:32] <LinAsH> Iradigalesc, it's a router issue, not apache configuration
[12:32] <TheVault> tck: M$?
[12:33] <calc> Iradigalesc: two things to do, make sure if you are behind a NAT router to port forward for http
[12:33] <tck> microsoft - just a little joke
[12:33] <[GuS] > Hi people, i have one problem... i use apache2 with suexec, and then installed mailman and seems does not work with suexec, cause is not on default suexec docroot.. how i could solve this?
[12:33] <calc> Iradigalesc: second thing is to make sure that your isp doesn't block inbound http traffic
[12:33] <calc> Iradigalesc: many do
[12:33] <LinAsH> Iradigalesc, you may need services like dyndns or no-ip.org to redirect a domain name to your machine
[12:33] <snake> anyone knows what can i use to convert avi to mpeg ???????????
[12:33] <lbawinowns> Hello guys, can someone forward a  minor complaint, if I drag and drop a folder to the recycle bin. can't you just place the file/folder in the recycle bin instead of deleteing it
[12:33] <TheVault> tck: Oh. I already do, have it on Dual boot. I'm just making things the nice vista look with the power of Beryl at my finger tips
[12:34] <Ktravaglini> I am back - Sleep & Dads - Left at 15:34:51 - Gone for 2days 21hrs 33mins 41secs
[12:34] <EnsignRedshirt> Hola, mundo!  I want to add an external hard drive to fstab, so it always mounts at /media/usbhd.  Here is what I think I should do: (1) use blkid to get the uuid; (2) create the mount point /media/usbhd; (3) add the entry to fstab (basically by copying an existing example and changing the appropriate data).  Will this work?
[12:34] <Iradigalesc> OK, thanks!
[12:35] <lbawinowns> snake - check this site out http://vixy.net/, warning that I've never ever used it, no idea if it is good or malicious... Some guys said it was good though
[12:35] <madgoldfish> snake: ffmpeg if you're happy with command line. I think the mplayer package has some convertors in it too IIRC
[12:36] <jrib> EnsignRedshirt: yes
[12:36] <TheVault> tck: Whoa, hold on, that url gave me, I think I just found out after re-doing it again
[12:36] <TheVault> tck: I must have missed something when I was reading that url you gave me before
[12:36] <snake> thank you both
[12:36] <tck> :)
[12:37] <tck> TheVault, if it doesn't have an immediate effect try Ctrl+alt+backspace key to restart GDM
[12:37] <vbabiy_> Hello good people
[12:37] <mrsn0> heya vbabiy
[12:37] <mezziah> hi there
[12:38] <feathers> What package contains db_load?!
[12:38] <lbawinowns> what is DM?
[12:38] <lbawinowns> GDM*
[12:38] <Sergo> !gdm
[12:38] <ubotu> Sorry, I don't know anything about gdm - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[12:38] <boubbin> my apt wont update anymore, it clamis that operation is not permitted and there are strange files (?--------- 18037 root) in the /var/lib/apt/lists
[12:38] <TheVault> tck: Alrighty
[12:38] <madgoldfish> snake: the mplayer convertor is called mencoder
[12:38] <mrsn0> feathers apparently tinymux does
[12:38] <lbawinowns> !GDM
[12:38] <Sergo> lbawinowns you can look on wikipedia :D
[12:38] <TheVault> tck: Thanks, I missed something earlier when I was trying to change it. Thanks 4 the help :D
[12:38] <dotpavan> !gnome-desktop-manager>lbawinowns
[12:38] <mrsn0> not sure if thats what you are after O-o
[12:38] <CNTRLX> when burning a debian cd with k3b that is 890mb do i burn it with TAO?
[12:39] <tck> http://arstechnica.com/news.ars/post/20070617-ubuntu-founder-defuses-rumors-of-impending-microsoft-deal.html
[12:39] <lbawinowns> aha, then I know
[12:39] <vbabiy_> hey guys has any one installed ie 4 linux
[12:39] <lbawinowns> anyway, that never worked for me, ever
[12:39] <feathers> !db_load
[12:39] <ubotu> Sorry, I don't know anything about db_load - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[12:39] <sorsis> i have kdm in use but i want to set gdm. what is easiest way to change display manager?
[12:39] <feathers> !libdb
[12:39] <LinAsH>  CNTRLX DAO would be better
[12:39] <ubotu> Sorry, I don't know anything about libdb - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[12:39] <mezziah> sorsis: sudo dpkg-reconfigure gdm
[12:40] <CNTRLX> k
[12:40] <feathers> fuck ubuntu
[12:40] <vbabiy_> feathers: what do you need
[12:40] <PriceChild> !ohmy | feathers
[12:40] <ubotu> feathers: Please watch your language and keep this channel family friendly.
[12:40] <mezziah> then you can choose your display manager
[12:40] <sorsis> mezziah: ty
[12:40] <lbawinowns> lol srry, it DOES work
[12:40] <joetheodd> Is there a easy to use POP3 / SMTP server on the repositories?
[12:40] <LinAsH> CNTRLX, but is it really 890 mB? pretty big...
[12:40] <lbawinowns> i just always had mixed up backspace with space ...
[12:40] <david_> can anyone tell me a good "mac like" dock for ubuntu? ive tried some but had no luck
[12:41] <CNTRLX> yes
[12:41] <CNTRLX> it is
[12:41] <CNTRLX> im using rw
[12:41] <mezziah> david_: well, you can try gdesklets
[12:41] <PriceChild> david_, "mac like"? describe what you want it to do for the people here who haven't used a mac
[12:41] <mezziah> david_: theres a cool one
[12:41] <david_> does it work with beryl?
[12:41] <LinAsH> CNTRLX, you burn it on a dvd?
[12:41] <madgoldfish> david_: Tried Engage?
[12:41] <CNTRLX> no this 386
[12:41] <mezziah> don't know, never used it in combination with beryl.. just try it
[12:41] <david_> look like a mac dock thats  it
[12:41] <EnsignRedshirt> jrib: Thanks--just wanted a sanity check.
[12:41] <DR0P> Ubuntu sucks! Get rid of that shit, windows rules, THATS THE END OF IT.
[12:42] <david_> DROP stfu
[12:42] <david_> why are u here?
[12:42] <EnsignRedshirt> He's not.
[12:42] <madhatter349> hey
[12:42] <david_> haha lol
[12:42] <CNTRLX> winblows
[12:42] <madhatter349> none of my music is playing under linux from my ipod
[12:42] <unagi> hrm
[12:42] <unagi> i dont get wine
[12:43] <TaJMoX> dont use wine - just find a linux program that does the same thing
[12:43] <LinAsH> unagi, so try beer
[12:43] <lbawinowns> unagi - how come?
[12:43] <tck> what are these idiots coming in
[12:43] <magnetron> madhatter349: did Apple encrypt it?
[12:43] <mezziah> lol LinAsH that was my first thought
[12:43] <unagi> well i opened it and didnt see what i expected
[12:43] <tck> unagi, isn't it called cedega now?
[12:43] <madhatter349> nope just plain mp3's
[12:43] <unagi> not that i know of
[12:43] <unagi> i did apt-get wine
[12:43] <mezziah> unagi: what did you do? fired up a program with wine?
[12:43] <CNTRLX> it says simulating
[12:44] <CNTRLX> so its going
[12:44] <lbawinowns> unagi , try via the command line "wine <exe-file-location>
[12:44] <tck> Cedega (formerly known as WineX)
[12:44] <CNTRLX> sent cue sheet
[12:44] <madhatter349> and banshee made me like reupdate my whole playlist or something
[12:44] <CNTRLX> thanks ash
[12:44] <unagi> ill have to try that later
[12:45] <unagi> sucks having 2 hard drives lol
 what should i do
[12:45] <lbawinowns> unagi - why, i think you can mount em simultanuesly
[12:45] <CNTRLX> im putting debian on my external
[12:45] <unagi> not if you only have one sata connection in your laptop
[12:45] <EnsignRedshirt> unagi: wine is not windows.  It is a program that lets you run a windows program in linux.  If you have a windows program, say coolprog.exe, you can run it with the command "wine coolprog.exe".  (but not all programs will actually work).
[12:45] <unagi> ty redshirt
[12:45] <magnetron> madhatter349: did you buy the music from the iTunes store?
[12:46] <unagi> so you cant run say a windows game with wine?
[12:46] <madhatter349> no
[12:46] <lbawinowns> EnsignRedshirt explained it excellently
[12:46] <mezziah> unagi you can try some games but don't expect them to work
[12:46] <magnetron> unagi: some games, see appdb.winehq.org
[12:46] <lbawinowns> unagi - Yea you can, some of them
[12:46] <mezziah> minesweeper works perfectly :D
[12:46] <tck> unagi, sure you can which game?
[12:46] <magnetron> !mp3 | madhatter349
[12:46] <ubotu> madhatter349: For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats
[12:47] <tck> unagi, today i ran MOHAA without cedega
[12:47] <EnsignRedshirt> mezziah: Yeah, and after minesweeper, what more could you possible want?  :)
[12:47] <EnsignRedshirt> *possibly
[12:47] <madhatter349> shit
[12:47] <mezziah> yea right, thats all you need
[12:47] <madhatter349> it deleted all my music
[12:47] <PriceChild> !ohmy | madhatter349
[12:47] <TaJMoX> unagi : example: cd /media/cdrom ; wine install.exe
[12:47] <ubotu> madhatter349: Please watch your language and keep this channel family friendly.
[12:47] <unagi> i mean its not a big deal
[12:47] <unagi> im more curious than anything
[12:47] <ninix> what is the ubuntu repository for upgrade kdevelop. i don't remember it.
[12:47] <unagi> i run vista as well
[12:47] <deaden> ls
[12:47] <david_> hmm gdesklets wont run? :S david@david-desktop:~$ gdesklets
[12:47] <david_> Starting gdesklets-daemon...
[12:47] <david_> Cannot establish connection to daemon: timeout!
[12:47] <david_> The log file might help you solving the problem.
[12:47] <mezziah> and i got command & conquer: tiberian sun working, all the newest stuff around
[12:47] <noway-> Are there any sound settings I can look at?  My system sounds like its in headphone mode or something.
[12:47] <TaJMoX> I like how windows can't run Linux programs, but Linux can run windows programs
[12:48] <Scuddie> Anybody have avid understanding of DMRAID?
[12:48] <mezziah> TaJMoX: you can with Cygwin
[12:48] <rich__> hey how do i get usb devices to work?
[12:48] <Kandi3DRAKAN> yet not get any spyware ;)
[12:48] <madhatter349> anyway to recover my music
[12:48] <unagi> i need to figure out how to get my built in webcam running
[12:48] <unagi> speaking of.....does gaim have a/v suppport?
[12:48] <tck> openGL is alot more powerful than direct3D imho
[12:48] <TaJMoX> mezziah : to run stuff like Synfig or XMMS?
[12:48] <boubbin> im root and ubuntu tells me i cant remove a file. how to remove it then ?
[12:48] <rich__> !usb
[12:48] <ubotu> Sorry, I don't know anything about usb - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[12:48] <tck> unagi, amsn has great video support etc..
[12:48] <unagi> rich
[12:49] <unagi> what kind of device?
[12:49] <mezziah> TaJMoX: don't know if xmms works, but some kde and console apps work fine
[12:49] <rich__> any one know hwo to get usb devices to work
[12:49] <lbawinowns> boubbin what does "-ls -l filename" say?
[12:49] <CNTRLX> mount it
[12:49] <tck> rich__, what type/kind, did you mount?
[12:49] <dotpavan> !patience>rich__
[12:49] <Scuddie> Who knows how to use dmraid?
[12:49] <unagi> rich__: what kind of device?
[12:49] <boubbin> lbawinowns ?--------- 18036 root 47613 0 1970-01-01 11:13 fi.archive.ubuntu.com_ubuntu_dists_feisty_Release.gpg
[12:50] <rich__> boubbin,  gksudo nautilus
[12:50] <tck> rich__, try lsusb
[12:50] <rich__> umm samsung camcorder
[12:50] <boubbin> rich__ why ?
[12:50] <unagi> u had spent a long time trying to get my wireless mouse to work but all i did was restart with it plugged in and it works now
[12:50] <unagi> lol
[12:50] <unagi> i*
[12:50] <rich__> fam vacation movies
[12:50] <sorsis> why i lose my title bar bar with hide, close etc buttons when i start beryl?
[12:50] <lbawinowns> boubbin chmod 777 filename , if u want all to have full access to it
[12:50] <boubbin> lbawinowns i cant
[12:51] <tck> rich__, thats a first, never heard of anyone using a camcorder on linux :P
[12:51] <unagi> sorsis: goto your beryl settings and turn on window decorations
[12:51] <lbawinowns> sudo chmod 777 filename
 $ chmod 777 fi.archive.ubuntu.com_ubuntu_dists_feisty_Release.gpg
[12:51] <lbawinowns>  i mean*
[12:51] <CNTRLX> movie editing
[12:51] <boubbin> chmod: muutetaan tiedoston "fi.archive.ubuntu.com_ubuntu_dists_feisty_Release.gpg" oikeuksia: Operation not permitted
[12:51] <unagi> what exactly is chmod
[12:51] <unagi> i had to do that to get shake working
[12:51] <rich__> tck,  i did but didn;t pop up in terminal
[12:51] <mezziah> chmod changes permissions
[12:51] <boubbin> lbawinowns its somehow protected or something... apt wont run cause it cant renmae those files
[12:51] <lbawinowns> !chmod |unagi, boubbin
[12:51] <ubotu> unagi, boubbin: The files and directories on an Ubuntu system are organized according to a standard, see http://en.wikipedia.org/wiki/Filesystem_Hierarchy_Standard - file permissions are explained at https://help.ubuntu.com/community/FilePermissions - All filenames and directory names (and many other things) are case sensitive in Linux
[12:52] <matthew1429> !itunes
[12:52] <ubotu> itunes is not available on Linux, but there are many audio player alternatives (see !players). For Daap clients (sharing music with other iTunes clients on the network), install banshee
[12:52] <lbawinowns> boubbin, did you try to write it with sudo?
[12:52] <rich__> tck,  lol would be nice though l movie lol
[12:52] <Scuddie> !dmraid
[12:52] <ubotu> Sorry, I don't know anything about dmraid - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[12:52] <tck> rich__, apt-get install kino
[12:52] <boubbin> lbawinowns yeah. i "sudo su"
[12:52] <Scuddie> awww :(
[12:52] <rich__> !kino
[12:52] <ubotu> Sorry, I don't know anything about kino - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[12:52] <matthew1429> so there's no way to get automated d/l of podcasts under linux?
[12:53] <Scuddie> VLC media player FTW.
[12:53] <boubbin> lbawinowns i just wont show #, cause i changed it.
 $ whoami
[12:53] <tck> rich__, Non-linear editor for Digital Video data
[12:53] <boubbin> root
[12:53] <lbawinowns> ???? if "sudo chmod 777 filename" doesn't work, the problem is beyond my scope of knowledge
[12:53] <boubbin> lbawinowns you see the first char of the line?
[12:53] <sorsis> unagi: nope. didn't help. still windows without titlebars.
[12:53] <matthew1429> !podcast
[12:53] <ubotu> Sorry, I don't know anything about podcast - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[12:53] <rich__> tck,  this thing is also a digi cam
[12:53] <lbawinowns> yes?
[12:53] <boubbin> ?--------- 18036 root 0 1970-01-01 11:13 fi.archive.ubuntu.com_ubuntu_dists_feisty_Release.gpg
[12:53] <unagi> do you have a theme enabled in emerald?
[12:53] <boubbin> that ?-mark
[12:53] <Scuddie> !horses
[12:53] <ubotu> Sorry, I don't know anything about horses - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[12:53] <boubbin> what is that ?
[12:53] <tck> ok
[12:54] <boubbin> lbawinowns i know that d is for directories and so on, but what is "?" for?
[12:54] <boubbin> those files are corrupted maybe ?
[12:55] <boubbin> i still need to remove them, how to ?
[12:55] <rich__> tck, so what if i plug in another device should it just pop up or would i have to install a program of some sort?
[12:55] <ProN00b> does anyone know some apt-gettable graphics demos, i want to demonstrate my new screen
[12:55] <EnsignRedshirt> boubbin: Is that file on a linux filesystem?
[12:55] <tck> rich__, depends, if i enter a usb diskkey it shows up on desktop automatically
[12:55] <boubbin> EnsignRedshirt yeah
[12:55] <boubbin> EnsignRedshirt i dont have any other that ext3 on my system
[12:55] <tck> when you plug in your camcorder and do a lsusb (something should show up) but you said nothing did
[12:55] <tck> so..
[12:55] <lbawinowns> so the result of "sudo chmod 777 filename" is "?--------- 18036 root 0 1970-01-01 11:13 fi.archive.ubuntu.com_ubuntu_dists_feisty_Release.gpg" - boubbin
[12:55] <rich__> tck,  i just realized my mouse and keyboard and my printer works auto except printer but it does read printer
[12:56] <boubbin> lbawinowns no. sec
[12:56] <sorsis> unagi: how do i enable it?
[12:56] <tck> ok
[12:56] <frank__> help
[12:56] <rich__> tck,  would u suggest a digi cam for linux?
[12:56] <rich__> and phone
[12:56] <boubbin> lbawinowns :
 $ chmod 777 fi.archive.ubuntu.com_ubuntu_dists_feisty_Release.gpg
[12:56] <frank__> im too dumb to mount ;)
[12:56] <boubbin> chmod: muutetaan tiedoston "fi.archive.ubuntu.com_ubuntu_dists_feisty_Release.gpg" oikeuksia: Operation not permitted
[12:56] <noway-> Are there sound settings? equalizers in ubuntu?
[12:56] <rich__> noway-,  ya
[12:56] <noway-> Where can I find it?
[12:56] <tck> http://ubuntuforums.org/showthread.php?t=18046
[12:56] <deaden> boubbin: why 777? so insecure, surely 660 or 666 at the most would be enough?
[12:56] <tck> they say lots of ones there
[12:56] <lbawinowns> frank__ welcome , tried "sudo mount -a"?
[12:56] <zabi1> Hey
[12:56] <zabi1> hey
[12:57] <rockets> I'm having a really strange problem with sound
[12:57] <boubbin> deaden does it really matter when i cant set it anyway ?
[12:57] <deaden> su root, chmod 777 filename
 $ chmod 777 fi.archive.ubuntu.com_ubuntu_dists_feisty_Release.gpg
[12:57] <rockets> I only hear sound playing when I make the system beep run continuously. i.e. I play an mp3, and then open a shell and hold tab, and i hear the mp3 play
[12:57] <rich__> Noway - system admin then services
[12:57] <boubbin> chmod: muutetaan tiedoston "fi.archive.ubuntu.com_ubuntu_dists_feisty_Release.gpg" oikeuksia: Operation not permitted
[12:57] <zabi1> is there anyway to change the size of partitions using a ubuntu live cd?
[12:57] <rockets> stop holding tab, the MP3 stops
[12:57] <boubbin> deaden see ?
[12:57] <unagi> really simple question.......where is the settings to change alt for moving windows
[12:57] <frank__> lbawinowns:
[12:57] <frank__> http://nopaste.info/4e512bbc52.html
[12:57] <deaden> what are the current permissions?
[12:57] <sorsis> unagi: emeralg could not get some decoration settings or similar
[12:57] <frank__> and for anyone else :D
[12:57] <boubbin> deaden ?--------- 18036 root 0 1970-01-01 11:13 fi.archive.ubuntu.com_ubuntu_dists_feisty_Release.gpg
[12:58] <lbawinowns> !fat32
[12:58] <ubotu> To view your Windows/Mac partitions see https://help.ubuntu.com/community/AutomaticallyMountPartitions - See also !fuse
[12:58] <noway-> rich__, there is nothing under sound under services
[12:58] <zabi1> Hey is there anyway to change the size out a partition with a live cd
[12:58] <boubbin> deaden that "?" drives me nuts...
[12:58] <lbawinowns> !fuse | frank__
[12:58] <ubotu> frank__: Though it's still very unsafe, you can read about Ubuntu NTFS writing using fuse here: https://wiki.ubuntu.com/Lkraider/NtfsFuse
[12:58] <unagi> i just have a feeling its a bug in beryl........have you tried restarting x server?
[12:58] <Scuddie> !ntfs
[12:58] <ubotu> To view your Windows/Mac partitions see https://help.ubuntu.com/community/AutomaticallyMountPartitions . For write access see !ntfs-3g or !fuse
[12:58] <frank__> ubotu: FAT
[12:58] <frank__> ubotu: not ntfs
[12:58] <ubotu> Sorry, I don't know anything about not ntfs - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[12:58] <lbawinowns> nevermind kast*
[12:58] <sorsis> unagi: i think i have. i'll try again
[12:58] <frank__> arlfg
[12:58] <LjL> !bot > frank___    (frank___, see the private message from Ubotu)
[12:58] <rich__> noway - auto setting managment
[12:58] <frank__> lbawinowns: FAT, not ntfs!
[12:58] <lbawinowns> frank__ - ubotu is a bot.
[12:58] <frank__> lbawinowns: i realized that
[12:59] <Almagesto> hi all, i have installed the updated ATI restricted drivers, everything gone right, but after disabling them to make beryl work, i can't re-enable until i don't recompile the modules. What's going wrong?
[12:59] <frank__> lbawinowns: the line: /dev/sda5              2        1107    8883913+  b  W95 FAT32
[12:59] <mezziah> frank__: replace fat32 with vfat, that one should work
[12:59] <frank__> lbawinowns: says its an FAT partition
[12:59] <noway-> rich__, ? thats not under there either...
[12:59] <unagi> could anyone tell me how to change the move window shortcut
[12:59] <unagi> i dont want alt click to move the window
[12:59] <frank__> mezziah: ah thanks... but: [364505.286291]  VFS: Can't find a valid FAT filesystem on dev sda1.
[12:59] <sorsis> unagi: "system"->"settings"->"windows" or similar. I'm using different language so i'm guessing right words.
[01:00] <unagi> lemme try
[01:00] <frank__> mezziah: from dmesg
[01:00] <sorsis> unagi: to change that key
[01:00] <mezziah> umm
[01:00] <boubbin> i have corrupted files on my system and i would like to remove them, how to do this, when my system tells me it cant remove them ?
[01:00] <rich__> noway-,  what kind amedia player u use
[01:00] <unagi> ah there it is
[01:00] <unagi> thank u
[01:00] <lbawinowns> frank__  tried that first message that ubotu wrote when i typed !fat ?
[01:00] <frank__> yes
[01:00] <noway-> rich__, rythim box, but I have tried under different players also
[01:00] <frank__> i assume the partition is broken
[01:01] <frank__> or the mft because in dmesg stands something like superblock is broken
[01:01] <noway-> rich__, ever since my nephew hit some keys, the sound has been horrible.  Like its set to head phones or something.
[01:01] <lbawinowns> boubbin - it might be unsophisticated , but try delete the folder its in, then copy back all the old files in there, have worked for me a couple of times when i had the very same problem
[01:01] <stamen> excuse me
[01:01] <frank__> but imanaged to mount the other partition
[01:01] <boubbin> lbawinowns ok ill try.
[01:01] <lbawinowns> !fat | frank__
[01:01] <ubotu> frank__: To view your Windows/Mac partitions see https://help.ubuntu.com/community/AutomaticallyMountPartitions - See also !fuse
[01:02] <lbawinowns> be sure to test teh link
[01:02] <stamen> i want know unix programming.
[01:02] <rich__> noway -  do u have multi media keyboard?
[01:02] <noway-> yeah
[01:02] <lbawinowns> unix programming?
[01:02] <Xsylotte> question: any statistical software package for ubuntu ?
[01:02] <stamen> yes.
[01:02] <boubbin> lbawinowns i cant copy the files that are signed as "?" ...
[01:02] <stamen> can u recommend a book?
[01:03] <lbawinowns> I'm no expert, but this channel is about linux, not unix, linux support, not programming.
[01:03] <LinAsH> stamen, which language?
[01:03] <lbawinowns> boubbin - I hav no idea erally, sorry
[01:03] <rich__> noway-,  go to top bar right click hit add to panel
[01:03] <rich__> and add volume
[01:03] <rich__> thing
[01:03] <stamen> oh; i see
[01:03] <jrib> Xsylotte: R
[01:03] <rich__> and see if that works
[01:03] <Xsylotte> jrib: what ?
[01:03] <EnsignRedshirt> Xsylotte: I haven't used it, but the usual answer to that question is R.
[01:03] <jrib> Xsylotte: http://www.r-project.org/
[01:04] <boubbin> lbawinowns is it possible to reconfigure apt to use different direcotry that /var/lib/apt for those source lists ?
[01:04] <lbawinowns> boubbin, ask jrib while he is here, he is god in these things
[01:04] <Almagesto> why everytime i disable restricted drivers i can't re-enable them until i recompile modules? i have an ati card
[01:04] <jrib> Xsylotte: it's packaged in the repos (package is r-base for example), but that is the project's website
[01:04] <VERTiG0> would anybody like to help me get basic wired internet access through my old laptop with feisty on it?
[01:04] <eX|Joe> i need help with grub.  I'm doing a dual boot windows xp / ubuntu.  I installed XP first, followed by Ubuntu.  XP is on SATA (hd0) and XP is on IDE (hd1).  When I start grub to xp it does "Starting Up" and stays there...  Does not ever truely boot.
[01:04] <eX|Joe> It will boot Ubuntu find tho.
[01:04] <noway-> rich__, not really... I can change the volume, but it still sounds horrible...
[01:05] <Jordan_U_> VERTiG0, Does System -> Administration -> Networking not work?
[01:05] <rich__> noway-,  i dunno what to tell u i use surround sound stereo and i have remote and i use my keyboard
[01:05] <VERTiG0> Jordan_U, do you mind if we do this through PM?  it's a bit of a bigger problem than i anticipated
[01:05] <eX|Joe> this is my menu.1st
[01:05] <eX|Joe> http://paste.ubuntu-nl.org/26182/
[01:05] <varga> irc.freenode.net
[01:05] <Xsylotte> jrib: does R support amd64 ?
[01:06] <jrib> Xsylotte: yes
[01:06] <Xsylotte> hmm
[01:06] <Xsylotte> why i can't see amd64 packages :(
[01:06] <noway-> rich__, thanks, I will keep looking
[01:06] <jrib> !info r-base
[01:06] <ubotu> r-base: GNU R statistical computing language and environment. In component universe, is optional. Version 2.4.1-1 (feisty), package size 23 kB, installed size 56 kB
[01:06] <Jordan_U_> VERTiG0, If you want to go to a channel that is less crowded, that is what #ubuntu-classroom is for, it's better to ask in a channel where more people can see your question and help.
[01:06] <jrib> !universe > Xsylotte (see the private message from ubotu)
[01:06] <VERTiG0> but isn't this channel for help?
[01:07] <shiftplusone> Hey, can someone tell me how to check if something is running? (in a script)
[01:08] <mezziah> Jordan_U: are there more channels like that? like for smalltalk?
[01:08] <unagi> is there a way to get linux to automatically play a dvd when u double click the icon?
[01:08] <avb> vb
[01:08] <eX|Joe> anyone wanna answer my question?
[01:08] <eX|Joe> you get super cool points if you do
[01:08] <noway-> rich__, I found it!  I had to right click on the volume control, and change the PCM volume.
[01:08] <avb> hi all
[01:08] <blue|palm> !apt-crash
[01:08] <ubotu> Sorry, I don't know anything about apt-crash - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[01:08] <blue|palm> !apt-fix
[01:08] <ubotu> Sorry, I don't know anything about apt-fix - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[01:08] <avb> guys, may anybody knows why pidgin is still 2.0 while 2.0.2 is already out?
[01:09] <blue|palm> avb, ubuntu repositories always delayed
[01:09] <blue|palm> avb, go to www.getdeb.net
[01:09] <eX|Joe> avb, its for stability purposes
[01:09] <eX|Joe> i suggest you keep the version you have until it is updated
[01:09] <blue|palm> eX|Joe, with all due respect, that argument is void :D the upgrade to pidgin fixes stability issues, why is it not included then?
[01:09] <znoG> hey
[01:09] <EnsignRedshirt> Is there a wiki page that explains Ubuntu's update policy? If not, there should be.  Seems like everyone eventually asks that question.
[01:10] <znoG> anyone know how to load keyboard layouts into Ubuntu?
[01:10] <avb> blue|palm: is this deb works fine with a plugins from gutsy repo?
[01:10] <unagi> !mouse themes
[01:10] <ubotu> Sorry, I don't know anything about mouse themes - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[01:10] <jrib> EnsignRedshirt: !timebasedreleases
[01:10] <psilocyde> is this ubuntu help channel
[01:10] <TaJMoX> unagi - try http://www.gnome-look.org
[01:10] <psilocyde> ?
[01:10] <blue|palm> avb, hmm only update if you reaaaallly need to (which you prob dont)
[01:10] <jrib> psilocyde: yes, welcome
[01:10] <blue|palm> avb, try it and see
[01:10] <psilocyde> cool
[01:10] <znoG> when I go to regional settings, it doesn't list any keyboard layouts for other languages
[01:10] <unagi> ty
[01:10] <blue|palm> !apt
[01:10] <ubotu> APT is the Advanced Package Tool, which together with dpkg forms the basic Ubuntu package management toolkit. Short apt-get manual: https://help.ubuntu.com/community/AptGetHowto - Also see !Synaptic (Gnome) or !Adept (KDE)
[01:10] <eX|Joe> blue|palm, I understand your argument, but you just proved mine :D
[01:11] <avb> eX|Joe: :) any new release is better then 2.0. 2.0 is killing me :)
[01:11] <unagi> i love the linux community everyone is so helpful
[01:11] <blue|palm> eX|Joe, lol
[01:11] <psilocyde> im getting an error when trying to do updates
[01:11] <EnsignRedshirt> !timebasedreleases > EnsignRedshirt
[01:11] <blue|palm> avb, then go to www.getdeb.net
[01:11] <modconfig> just a little annoyance: why is it that when you start the computer and begin to log in, the first key pressed (even after clicking inside the login box) turns off num lock, and doesn't display the key pressed? it happens with ubuntu 7.04 and kubuntu 7.04? is there a fix?
[01:11] <avb> msn always crashing
[01:11] <psilocyde> i get "E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem. "
[01:11] <avb> :(
[01:11] <eX|Joe> avb, thats why.  its microsoft.
[01:11] <tck> avb, amsn?
[01:11] <jrib> psilocyde: did you try running 'sudo dpkg --configure -a'?
[01:11] <avb> 2-4 times a day
[01:11] <eX|Joe> avb, use tck's recommendation
[01:11] <TaJMoX> psilocyde : run that command in a terminal, preceding with sudo.   if that doesnt work go into synaptic, click filters, and find broken packages and repair them
[01:11] <psilocyde> i dont know how sorry
[01:11] <EnsignRedshirt> jrib: That short blurb doesn't really explain the no-updates policy.
[01:11] <eX|Joe> i need help with grub.  I'm doing a dual boot windows xp / ubuntu.  I installed XP first, followed by Ubuntu.  XP is on SATA (hd0) and XP is on IDE (hd1).  When I start grub to xp it does "Starting Up" and stays there...  Does not ever truely boot.
[01:11] <blue|palm> how do you unlock apt after it has crashed?
[01:12] <znoG> anyone know how to load keyboard layouts (for other languages) into Ubuntu?
[01:12] <eX|Joe> blue|palm restart?
[01:12] <psilocyde> ok
[01:12] <some_dude> hi
[01:12] <some_dude> how do I install java ?
[01:12] <jrib> EnsignRedshirt: the last link should, or were you referring to that?
[01:12] <avb> eX|Joe: :) I know, but nothing to do with this
[01:12] <TaJMoX> psilocyde : Accessories -> Terminal     then enter this command: sudo dpkg --configure -a
[01:12] <jrib> !java > some_dude (see the private message from ubotu)
[01:12] <blue|palm> eX|Joe, there is a fix...
[01:12] <Xsylotte> jrib:
[01:12] <Xsylotte> The following packages have unmet dependencies:
[01:12] <Xsylotte>   r-base: Depends: r-base-core (>= 2.5.0-2feisty0) but 2.4.1-1 is to be installed
[01:12] <Xsylotte>           Depends: r-recommended (= 2.5.0-2feisty0) but it is not going to be installed
[01:12] <Xsylotte> E: Broken packages
[01:12] <jrib> !paste | Xsylotte
[01:12] <ubotu> Xsylotte: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic)
[01:12] <blue|palm> eX|Joe, its on a factoid here, I just cant remember what that factoid is!!!
[01:12] <DiamondsOfH> eX|Joe, install ubntu after windows, and it should automaticly apply evrything
[01:12] <mikessilo> i need to talk to an expert about something
[01:12] <DiamondsOfH> ubuntu even
[01:12] <jrib> Xsylotte: pastebin your /etc/apt/sources.list
[01:12] <Jordan_U__> eX|Joe, Are you sure that GRUB was installed on the Drive you are booting from?
[01:12] <jrib> !ask | mikessilo
[01:12] <ubotu> mikessilo: Don't ask to ask a question. Just ask your question :)
[01:12] <Xsylotte> dunno how :D
[01:12] <avb> eX|Joe:  icq can be changed to jabber, but all businesses is in msn :(
[01:12] <eX|Joe> DiamondsOfH, I did
[01:12] <Xsylotte> and too tired tonight.
[01:13] <unagi> is there a better dock than kiba?
[01:13] <mikessilo> !ask
[01:13] <TaJMoX> unagi - I use gdesklets and love it
[01:13] <unagi> is it buggy?
[01:13] <bur[n] er_> unagi: awn
[01:13] <blue|palm> !aptfix
[01:13] <ubotu> If Adept crashed on you and your database is locked, try this in konsole:  sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a 
[01:13] <unagi> !awn
[01:13] <blue|palm> eX|Joe, there it is!!!
[01:13] <ubotu> Sorry, I don't know anything about awn - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[01:13] <some_dude> ok, now I dumped the java folder into /usr, do I need to remove it ?
[01:13] <unagi> !gdesklets
[01:13] <ubotu> gDesklets provides an advanced architecture for desktop applets -- tiny displays sitting on your desktop in a symbiotic relationship of eye candy and usefulness. Homepage is http://gdesklets.gnomedesktop.org/
[01:13] <jrib> EnsignRedshirt: see !sru too
[01:13] <TaJMoX> unagi - its not buggy and it doesn't stay on top of all programs like kiba does
[01:14] <VERTiG0> oh jesus hell.  it was a bad network cable all along.
[01:14] <Jordan_U__> unagi, Avant-window-navigator is nice
[01:14] <jrib> some_dude: yes, that is not the right way
[01:14] <modconfig> does anyone else have that issue with the num lock going off when a key is pressed when trying to log in?
[01:14] <unagi> !avant-window-navigator
[01:14] <mikessilo> need to talk to someone about a controller error
[01:14] <unagi> i guess imt rying to get it as smooth and as close to osx dock as possible
[01:14] <jrib> mikessilo: ask your question to the channel
[01:14] <mikessilo> i dont know how to word it
[01:14] <some_dude> how do i remove it ?
[01:14] <Xsylotte> jrib: tomorrow maybe...nn.
[01:14] <Xsylotte> and thx
[01:15] <TaJMoX> unage - try apt-cache search avant   in a terminal
[01:15] <noodles12> if i'm installing ubuntu and putting / and /home on different partitions. how big should / be?
[01:15] <bur[n] er_> unagi: http://awn.wetpaint.com/page/Ubuntu+Feisty+Repository?t=anon
[01:15] <Jordan_U__> TaJMoX, I don't think it's in the repos :(
[01:15] <mikessilo> we cant get ubuntu to install be of the error i2o:1op0 could not load controller
[01:15] <N0xTrUm> hello
[01:15] <TaJMoX> unagi - or apt-cache search gdesklets
[01:15] <modconfig> noodles12, i recommend 2 gig
[01:15] <TaJMoX> ah
[01:15] <LinAsH> noodles12, about 10-12 GB
[01:15] <EnsignRedshirt> jrib: OK, I took a closer look at the links in the timebasedreleases blurb, but they really don't make clear (from the point of view of a basic user) that a given release will not get updated versions of software.
[01:15] <mikessilo> the controller is a pci scsi raid controller
[01:15] <modconfig> noodles12, at least 2 gig that is
[01:16] <mikessilo> 4 hard drives in a raid 5 config
[01:16] <jrib> EnsignRedshirt: did you catch my last comment about !sru?
[01:16] <noodles12> thanks guys. i was planning on doing 10 gb. but wasnt' sure if that would be enough.
[01:16] <EnsignRedshirt> jrib: Getting there...
[01:16] <EnsignRedshirt> !sru > EnsignRedshirt
[01:16] <rich__> noodles12,  10 is good but 20 is beter
[01:16] <jrib> EnsignRedshirt: you can just do:  /msg ubotu sru
[01:16] <boubbin> jrib do you know why i cant delete these couple files from my system, even when im on root ? example file: ?--------- 18037 root        0 1970-01-01 11:13 fi.archive.ubuntu.com_ubuntu_dists_feisty_universe_i18n_Translation-fi
[01:17] <TaJMoX> noodles12 : /home is where your application's configuration files and your personal documents are stored.    also probably your video and music etc
[01:17] <LinAsH> noodles12, it depends if you're planning to install kde+gnome+ all big games ;)
[01:17] <TaJMoX> noodles12 : if you have over 100GB then use 40GB or more.   this is the only writable place for your documents and personal files
[01:17] <jrib> boubbin: no, but try running fsck... if they are on the same partition as /, do 'sudo touch /forcefsck' and reboot
[01:17] <noodles12> rich__: i'd do 20 but i don't think i have enough room. i only have 80gb.  i was gonna go 20 for windows, 5 for documents, 5 for fat32, 10 for ubuntu, and the rest for /home
[01:17] <rich__> boubbin,  gksudo nautilus
[01:17] <EnsignRedshirt> jrib: Ah, so that's what ubotu meant by "please use a private message..."
[01:17] <CNTRLX> im installing debian for xfce and keeping ubuntu for gnome
[01:17] <boubbin> rich__ what is that ?
[01:17] <jrib> CNTRLX: ubuntu has xfce as well
[01:18] <TaJMoX> noodles12 my /home is currently using 80% of my entire partition
[01:18] <CNTRLX> yes
[01:18] <rich__> so u will have permissons on files
[01:18] <rich__> folders and what not
[01:18] <rich__> i told u that like 30 min ago
[01:18] <mikessilo> slash cry
[01:18] <boubbin> rich__ no, i cant do anything to those files.
[01:18] <psilocyde> im getting a new error now
[01:18] <psilocyde> W: Duplicate sources.list entry http://security.ubuntu.com edgy-security/universe Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_edgy-security_universe_binary-i386_Packages)
[01:18] <psilocyde> W: Duplicate sources.list entry http://archive.canonical.com edgy-commercial/main Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_edgy-commercial_main_binary-i386_Packages)
[01:19] <jrib> psilocyde: don't paste here, use http://paste.ubuntu-nl.org .  Use it now to paste your /etc/apt/sources.list please
[01:19] <jrib> mikessilo: if no one here can help you at the moment, you may want to try the forums and/or mailing list since your question is a bit rare
[01:19] <rich__> boubbin,  type gksudo nautilus in terminal then a file broswer will pop up then go to dir there and u can do whatever
[01:19] <jrib> !support > mikessilo (see the private message from ubotu)
[01:19] <noodles12> do i really need a swap file? i have 2gb of RAM and have never seen it used?
[01:19] <unagi> apparently the menu bar requires a different theme tweak?
[01:19] <jrib> noodles12: yes if you want to hibernate
[01:19] <psilocyde> please excuse my ignorance, i will do that thank you
[01:19] <rich__> noodles12,  yes
[01:20] <TaJMoX> psilocyde : you can ignore that error, or edit your /etc/apt/sources.list file and remove the duplicate entry
[01:20] <rich__> noodles12,  swap  will be very small
[01:20] <Vall-k> hi!
[01:20] <TaJMoX> noodles12 make 512mb swap
[01:20] <unagi> sigh
[01:20] <Vall-k> please, somone can help me?
[01:20] <boubbin> jrib well there was a lighting strom that caused electricity "stop" for an hour last week and i needed to start my pc again. it did fcsk and it "died with status 1" or something like that and after that startup i havent been able to use those files (and apt-get)
[01:20] <unagi> sometimes i feel im too stupid for this linux stuff
[01:20] <LinAsH> noodles12, you need it if you plan tu use the suspend function
[01:20] <EnsignRedshirt> jrib: OK, the sru pages are better.
[01:20] <CNTRLX> haha same
[01:21] <noodles12> LinAsH: will 512mb be enough to suspend and hibernate?
[01:21] <negen> Hello it seems to me that even when i select to do a full install overwriting the old partitions it remembers some of the hardware settings of the old install is there a way to completly start fresh as if i am installing on a new hardisk
[01:21] <jrib> boubbin: well that seems to mean that errors were corrected.  But I would run it again and see if anything new shows up
[01:21] <boubbin> ok
[01:21] <LinAsH> noodles12, hibernate is to dd and suspend is to ram
[01:21] <TaJMoX> noodles12 it depends on how much programs are running.   hibernate puts everything that is in RAM into swap.   rarely you will be even using 512MB of ram
[01:22] <unagi> anyone know what to do with mouse themes?
[01:22] <TaJMoX> unagi - install like you would an icon set.   drag the tar.gz file onto the themes window
[01:22] <negen> i use about 315mb ram right now
[01:22] <unagi> ty
[01:22] <psilocyde> http://paste.ubuntu-nl.org/26187/
[01:23] <psilocyde> i think i did that right
[01:23] <CNTRLX> me to negen
[01:23] <TaJMoX> unagi - dont try to use the pointer set as your icon set...it will be in your icons set list in the theme picker, dont pick it.   choose mouse pointer from settings
[01:23] <VERTiG0> I'm updating the packages from Synaptic right now and I have the single file progress being shown.... EVERY SINGLE one is showing "status: failed" ...  thoughts?
[01:23] <negen> whats up?
[01:23] <rich__> negen,  waddup
[01:23] <unagi> i just dled a new set and its not in the window
[01:23] <noodles12> TaJMoX: ok thanks. here ig o installing.. c u!
[01:23] <unagi> and dragging it there doesnt work
[01:24] <Jordan_U> VERTiG0, Are you connected to the internet?
[01:24] <unagi> is there a dir i need to put it in?
[01:24] <psilocyde> can i get any help with my problem
[01:24] <VERTiG0> yes Jordan_U, apparently
[01:24] <VERTiG0> at the top its showing "downloading file 8 of 40"
[01:24] <Vall-k> I have a HTML form, with a input type "file", but when i send the value to the PAGE.PHP (method POST) doesn't works... but if the input is type "text" works ok... can you help me please?? (sorry for my "english" :P)
[01:24] <TaJMoX> unagi - drag the tar.gz onto the themes chooser
[01:24] <VERTiG0> now its on "10 of 42"
[01:24] <filthpig> hi
[01:24] <TaJMoX> unagi then if it installed successfully - you can delete the tar.gz
[01:24] <unagi> under mouse preferences?
[01:25] <Jordan_U> VERTiG0, But that may just mean that the first 9 failed because they couldn't connect
[01:25] <TaJMoX> unagi - in Themes
[01:25] <LinAsH> Vall-k, /join ##php
[01:25] <VERTiG0> even the most recent ones have failed
[01:25] <TaJMoX> unagi - it might work in mouse prefs in pointers
[01:25] <VERTiG0> they are all failing
[01:25] <Jordan_U> VERTiG0, Try pinging google.com or going somewhere with fireox
[01:25] <Jordan_U> *firefox
[01:25] <unagi> its not working either way
[01:25] <unagi> i tried it in mouse prefs and emerald
[01:25] <Vall-k> LinAsH... i can't... show "Overflow" :S
[01:25] <negen> the very frist time i installed ubuntu on this system it was new system and 5.10 was the hot topic but since then i have done a fresh install for each full upgrade and never had to reinput as must data as i did during the frist install it remember the moniters name and things like that I think there must be a way to completly wipe my drive befor i do a full install isnt there?
[01:25] <VERTiG0> hm
[01:25] <TaJMoX> unagi - extract the tar.gz and move the folder to ~/.icons
[01:26] <filthpig> I've been doing some rescue work on my friend's hdd using ntfs-3g to copy some files from one physical drive to another (both ntfs), but when I try to open the copied folder from windows, I get some error
[01:26] <VERTiG0> firefox is saying "Looking up www.google.com..." as if it isn't connected at all.
[01:26] <VERTiG0> weird...
[01:26] <HungryCakes> I'm having trouble with Ubuntu and torrenting, after a certain period of time, all connections to the internet in the house stop.  This only happens when I torrent on the Ubuntu box, every other computer torrents fine.  I tried launchpad, but noone seems to be able to give me any kind of fix.  I'm using Ktorrent, my ISP is Verizon FIOS, and I have an Actiontec MI-424-WR router (came with the FIOS setup).
[01:26] <VERTiG0> and i can't get to any webpage at all normally with firefox
[01:26] <TaJMoX> hungrycakes : try limiting the connections used in your torrent client's settings
[01:26] <VERTiG0> Jordan_U, should i cancel the synaptic update and perhaps reboot or something?
[01:27] <LinAsH> HungryCakes, I had the same problem with ktorrent
[01:27] <Vall-k> pleeeeaseee!! :'(
[01:27] <TaJMoX> hungrycakes : windows has a limit on connections - ubuntu doesnt
[01:27] <rich__> TaJMoX,  what torrent clinet do u prefer?
[01:27] <TaJMoX> rich__ i use deluge
[01:27] <LinAsH> HungryCakes, I use rtorrent now
[01:27] <vox754> !please
[01:27] <ubotu> Avoid your questions being followed by a trail of "Please, help me", "Can nobody help me?", "I really need this!", and so on. This just contributes to making the channel unreadable. If you are not answered, ask again later; but see also !repeat and !patience
[01:27] <rich__> TaJMoX,  man i get slow speed on all torrent clients and i set em up properly
[01:28] <HungryCakes> TaJMoX, I've limited connections
[01:28] <fxfitz> Does anyone know how to set up apache to authenticate MythWeb??
[01:28] <LinAsH> HungryCakes, try to desactivate UPnP
[01:28] <HungryCakes> LinAsH, I've tried rtorrent, but it doesn't seem to work for my torrents, plus the lack of a GUI and RSS torrents doesn't help
[01:28] <Jordan_U> VERTiG0, Try reconnecting with System -> Administration -> Networking or run: sudo ifconfig eth0 && sudo dhclient eth0
[01:29] <HungryCakes> LinAsH, I'm port forwarding, no UPnP
[01:29] <negen> is there a way to burn a dvd iso with out it reading it after it is burned as a dvd-r
[01:29] <LinAsH> HungryCakes, Azureus is fine if you've got lot of ram
[01:29] <rich__> TaJMoX,  think u can help me setting up deluge
[01:29] <unagi> search for files likes to lock up my pc
[01:29] <HungryCakes> LinAsH, I tried Azureus too, same problem
[01:29] <rockets> I'm not getting any sound, except when the system beep plays. i.e. if I hold down tab a a terminal, I'll hear my MP3s playing
[01:30] <Jordan_U> negen, What do you mean, what do you want it to read it as?
[01:30] <dfgas> ok, i have an usb audio that work on ubuntu, how do i get it to default to use that
[01:30] <rockets> dfgas, alsaconf list
[01:30] <negen> just as if it was a store bought dvd
[01:30] <rockets> alsaconf set-default-card cardname
[01:31] <LinAsH> HungryCakes, deluge-torrent? ;)
[01:31] <dfgas> rockets: no such file
[01:31] <negen> it seems that i have to change to /dev/media/cdrom0 if i want smplayer to play  my freinds wedding movie  but if i play  a store bought dvd it will play from /dev/dvd
[01:31] <HungryCakes> LinAsH, never tried that one, would a change in client help?
[01:32] <LinAsH> well for me it helps
[01:32] <rockets> dfgas, sorry asoundconf is the command
[01:32] <HungryCakes> LinAsH, I'll try deluge-torrent then, thanks
[01:33] <dfgas> rcoket all i have is default
[01:33] <dfgas> rocket
[01:33] <deaden> negen: ln -sf /dev/media/cdrom0 /dev/dvd
[01:34] <dfgas> rockets: us there something i have to do to get alsa to see usbudio, i know it works on alsa cause i made xmms use that card
[01:34] <rockets> dfgas, idk, mine just works after i use that command
[01:34] <rockets> my usb headset
[01:34] <dfgas> hmmm
[01:34] <dfgas> rockets: do you have that and a normal sound card?
[01:34] <VERTiG0> okay, my internet just stopped working again on my ubuntu machine.
[01:35] <VERTiG0> just totally randomly.
[01:35] <rockets> dfgas, yes
[01:35] <rich__> LinAsH,  is there a site to set up deluge?
[01:35] <Jordan_U> VERTiG0, Did you try the suggestion I gave you
[01:35] <Jordan_U> ?
[01:35] <Terzo> when i try to apply twin view in nvidia-settings, it tells me "Failed to set MetaMode (1) 'CRT-0: 1024x768 @1024x768 +0+0, DFP-0: 1440x900 @1440x900 +1024+0' (Mode 2464x900, id: 50) on X screen 0
[01:35] <Terzo> Would you like to remove this MetaMode?"  What does that mean?
[01:36] <LinAsH> rich__, via apt-get install deluge-torrent
[01:36] <VERTiG0> Jordan_U i just typed all that stuff into the terminal
[01:36] <aoeuhtns-> so I just backed up my harddrive using dd, anybody know the best way to verify it worked correctly?
[01:36] <VERTiG0> and its doing its thing now
[01:36] <rich__> LinAsH,  it is already installed i wnat to configure connections is there a site to match my speed to make max settings?
[01:37] <aoeuhtns-> I tried md5sum but over 300GB of data I can understand that an error might slip in (they didn't match...)
[01:37] <VERTiG0> Jordan_U, its done, and reports back with no DHCPOFFERS received...
[01:37] <Jordan_U> aoeuhtns-, If you have a lot of time to spare and and want to be really sure md5 it
[01:37] <VERTiG0> yet it shows up as connected in my routers' firmware status.
[01:37] <LinAsH> rich__, the best upload limit is about half your max upload speed
[01:38] <Jordan_U> VERTiG0, Does your router have DHCP enabled?
[01:38] <VERTiG0> yessir
[01:38] <rich__> LinAsH,  should i have mroe than one port open and if not how many
[01:38] <VERTiG0> all of my windows machines are setup to use it
[01:38] <VERTiG0> and of course, the router does
[01:38] <VERTiG0> but Jordan_U it's odd, because i switched ethernet cables when it wasn't working before, and on a whim it just worked
[01:38] <VERTiG0> everything worked
[01:39] <VERTiG0> now, 15 minutes later, it doesn't work anymore
[01:39] <VERTiG0> just randomly.
[01:39] <fuzzyhair> Under my system my "about gnome" is missing. How can I get it back?
[01:39] <Jordan_U> VERTiG0, And your wired interface is eth0?
[01:39] <VERTiG0> as soon as i started to update the synaptic package list it conked out
[01:39] <VERTiG0> yessir, eth0.
[01:39] <negen> strange that smplayer works but mplayer dosnt
[01:39] <LinAsH> rich__, default are fine I suppose, just configure your router to forward to the correct ports
[01:40] <unagi> lol i dont get installing custom pointers
[01:40] <Jordan_U> VERTiG0, And this card / computer worked fine with another OS?
[01:40] <VERTiG0> worked perfectly with windows
[01:40] <VERTiG0> absolutely everything wokred
[01:40] <VERTiG0> hell, it was working fine with ubuntu just 10 minutes ago!  hehe
[01:41] <Nwallins|home> I have liblame0, lame, liblame-devel, and ffmpeg installed, but ffmpeg still can't encode mp3s.  anyone know how to enable mp3 encoding / output ?
[01:41] <boubbin> jrib atleast i can run apt again, so fsck kind of fixed it :P
[01:41] <boubbin> thanks.
[01:41] <LinAsH> Nwallins|home, try with mencoder
[01:41] <negen> I was forced to buy windows the other day my sister needs a computer i am building for her ahhh spent all nite puking becouse i felt so horible that i had to be the one to buy it
[01:42] <Jordan_U> VERTiG0, I'm running out of ideas so just to cover all bases, the ethernet cable isn't loose or anything and you can see the appropriate lights blinking?
[01:43] <Terrasqu1> negen: you got issues, alright
[01:43] <Nwallins|home> LinAsH: hmm.. is there no way to do it with ffmpeg?
[01:43] <tovella> veritgo: i had a similar problem with my ex's kid's machine.
[01:43] <negen> thank god I had some holy water left from when i visted sto nino
[01:43] <Flawless_> Shouldn't it be possible to use multiple ALSA programs simultaneously in newer ubuntus? I have feisty, and a single app blocks the whole soundcard
[01:44] <TaJMoX> unagi - you should have a directory with an index.theme file.   put that directory in ~/.icons
[01:44] <eXeCuT3> i can't save files in iso-8859-8 with gedit... (The document contains one or more characters that cannot be encoded using the specified character coding), is there any other text-editor that can ?
[01:44] <eXeCuT3> (it says it even if the files is empty)
[01:44] <Jordan_U> Flawless_, Are you sure that that app isn't using OSS ?
[01:44] <unagi> then?
[01:44] <Flawless_> Flawless_: it's mplayer and xmms (or mplayer and mplayer)
[01:44] <Flawless_> Flawless_: so yes, 100%
[01:44] <TaJMoX> unagi - then go into the mouse preferences and see if it's listed there
[01:44] <tovella> VERTiG0: i had a similar problem with my ex's kid's machine.
[01:45] <Flawless_> Jordan_U: I'm tired. I'm answering myself for no reason ;)
[01:45] <LinAsH> Nwallins|home, ffmpeg -acodec mp3 works fine for me
[01:45] <Flawless_> Jordan_U: also, of course xmms was set the wrong way :(
[01:45] <unagi> its not
[01:45] <Flawless_> Jordan_U: but there's no way to enable dmixing on oss?
[01:45] <Flawless_> Jordan_U: wow, it works :)
[01:45] <Jordan_U> Flawless_, Are you using ALSA?
[01:45] <TaJMoX> unagi - try a different custom pointer
[01:45] <eX|Joe> Ok guys, I need serious help here...  I installed WinXP on drive (hda1), I followed by installing Ubuntu (sda), I am trying to add Windows XP to grub.  My Menu.1st is http://paste.ubuntu-nl.org/26182/ .
[01:46] <VERTiG0> Jordan_U, everything seems fine
[01:46] <BloodyTux> hey anyone use pidgin?
[01:46] <Jordan_U> Flawless_, I'm just that good ;)
[01:46] <tovella> VERTiG0: i switched to a different model of network card (and put it in a different slot).  it's been working well for the past 8 months.
[01:46] <TaJMoX> unagi - find one that works and compare the files heirarchy with the one that doesnt work
[01:46] <BloodyTux> nvm
[01:46] <VERTiG0> tovella, i don't have that option - it's an old laptop :)
[01:46] <Flawless_> Jordan_U: ;)
[01:47] <Flawless_> Jordan_U: but on a serious note, alsa only supports dmix for, well, alsa? Even though it really provides oss?
[01:47] <VERTiG0> basically what I'm trying to do is get this thing connected to the internet with a wired connection so i an get ndiswrapper from Synaptic, and then use that to get the drivers for my Linksys WPC54G cardbus wifi card to work
[01:47] <tovella> VERTiG0: there's was old too.  they'd spilled juice on it.  pccard slot available?
[01:47] <VERTiG0> yes, pccard slot is available, but i want that for my wifi card.
[01:47] <Jordan_U> Flawless_, You can emulate OSS through ALSA using aoss
[01:47] <tovella> VERTiG0: understandable.
[01:48] <crimsun> Flawless_: that's correct.  oss emulation cannot be dmixed, because dmix is an alsa-lib plugin, and oss emulation bypasses alsa-lib completely.
[01:48] <VERTiG0> see the thing is, tovella, this wired connection was working perfectly fine not 20 minutes ago, completely out of nowhere
[01:48] <eX|Joe> Ok guys, I need serious help here...  I installed WinXP on drive (hda1), I followed by installing Ubuntu (sda), I am trying to add Windows XP to grub.  My Menu.1st is http://paste.ubuntu-nl.org/26182/ .
[01:48] <VERTiG0> i'll reboot my router, see if that does anything.
[01:48] <Nwallins|home> LinAsH: I am upgrading to feisty as we speak.  using 6.10 currently.  maybe that will fix
[01:48] <LinAsH> Nwallins|home, well, it seams you have to recompil first: http://po-ru.com/diary/fixing-ffmpeg-on-ubuntu-edgy/
[01:48] <Flawless_> crimsun: ok
[01:48] <GUARDiAN|nb> hi
[01:49] <Jordan_U> !hi | GUARDiAN|nb
[01:49] <ubotu> GUARDiAN|nb: Hi! Welcome to #ubuntu!
[01:49] <GUARDiAN|nb> i have a problem with video playback in mythtv and/or totem: the red and blue channels are swapped
[01:49] <Flawless_> crimsun: then I just need to solve that the crossfader plugin refuses to buffer less than 1-2 seconds(!) of audio in xmms, which forces me to use its built-in oss output code, if I want crossfading to work
[01:49] <Nwallins|home> LinAsH: ok, thanks
[01:49] <Flawless_> crimsun: that is just... I can't win :P
[01:49] <GUARDiAN|nb> i'm running fglrx on feisty, btw
[01:49] <tovella> when i opened up their machine, i found corrosion all along  the slot that held the network card.  i cleaned & dried it, but after replacing the card, it still had the same problem, until i used a different slot.
[01:49] <Flawless_> crimsun: hmm.. maybe through aoss...
[01:49] <eX|Joe> Ok guys, I need serious help here...  I installed WinXP on drive (hda1), I followed by installing Ubuntu (sda), I am trying to add Windows XP to grub.  My Menu.1st is http://paste.ubuntu-nl.org/26182/ .
[01:49] <VERTiG0> well now
[01:50] <Jadder> Hello, everybody, I am practicing linux, in vi I want to know how I going to the last line of a file?
[01:50] <Jordan_U> Flawless_, To use xmms with aoss just install aoss and run: aoss xmms
[01:50] <LinAsH> Nwallins|home, first you may try the medibuntu version of ffmpeg: http://medibuntu.sos-sts.com
[01:50] <eX|Joe> how do you practice linux?
[01:51] <Flawless_> Jordan_U: just did :)
[01:51] <Flawless_> Jordan_U: there's still a quite long buffer, but it's better
[01:51] <rockets> Should I remove ubuntu's ALSA driver package before compiling the latest one?
[01:51] <crimsun> rockets: no, just make install-modules, not make install
[01:51] <LinAsH> eX|Joe, just make it run
[01:51] <tovella> eX|Joe: it looks like Windows XP is already in your menu.lst
[01:51] <crimsun> rockets: the former doesn't clobber our infrastructure unlike the latter
[01:52] <Flawless_> Jordan_U, crimsun: thank you, it's rocking!
[01:52] <Xristina24> hi i have a big problem installing ati catalyst driver
[01:52] <eX|Joe> LinAsH, tovella, its not running tho.  It says "Starting Up" and just stays there... Never booting
[01:52] <Nwallins|home> LinAsH: oh cool, I'd rather stick with packages -- thanks!
[01:52] <Jordan_U> Jadder, "G"
[01:52] <Xristina24> can you help???
[01:53] <LinAsH> eX|Joe, was thinking that installing grub on your other drive and changing the boot order in bios might works
[01:53] <tovella> eX|Joe: your windows installation should have been detected when you installed ubuntu.  do you have another menu.lst (a backup)?
[01:53] <eX|Joe> i do
[01:53] <ProN00b> how do i change brightness of my screen ? (screen interface is at minimum, i need something to config it on X or the nvidia driver)
[01:53] <Pirate_Hunter> Can ubuntu give me acces to my windows partitions so it makes life easier to move files around instead of ahving to boot all the times
[01:54] <eX|Joe> LinAsH, are you asking if I can install grub on {(hda1)WinXP}?
[01:54] <tovella> eX|Joe: can you put it in pastbin?
[01:54] <LinAsH> eX|Joe, well on the mbr of hda
[01:54] <Pirate_Hunter> 8989
[01:55] <julio_> Cool app.
[01:55] <eX|Joe> http://paste.ubuntu-nl.org/26196/
[01:55] <eX|Joe> LinAsH, I'd rather keep that as my very last resort.
[01:55] <Pirate_Hunter> Can ubuntu give me access to my windows partitions so it makes life easier to move files around instead of having to boot all the times into windows
[01:56] <Jordan_U> !ntfs-3g | Pirate_Hunter
[01:56] <ubotu> Pirate_Hunter: ntfs-3g is a Linux driver which allows read/write access to NTFS partitions. Installation instructions at https://help.ubuntu.com/community/MountingWindowsPartitions
[01:56] <Pirate_Hunter> Jordan_U: tanx will check it out
[01:56] <Jordan_U> Pirate_Hunter, np
[01:56] <eX|Joe> Jordan_U, same questions over and over eh?
[01:56] <Gerrit> Goodnight
[01:57] <Jordan_U> eX|Joe, That's what ubotu is for :)
[01:57] <eX|Joe> they need a !omgrubforxp for my question...
[01:57] <jrib> Kandi3DRAKAN: please don't do that
[01:57] <eX|Joe> brb in one sec
[01:58] <Jordan_U> !grub > eX|Joe
[01:58] <Kandi3DRAKAN> sorry not used to new Mirc
[01:58] <tovella> eX|Joe: based on what i see in your menu.lst, it appears that when you installed ubuntu, you overwrote the windows partition, instead of letting ubuntu make a separate partition.
[01:58] <Kandi3DRAKAN> did
[01:58] <Kandi3DRAKAN> DMZ fu)*) that up
[01:58] <zeeeee> will the emacs-snapshot package be updated to support xft fonts anytime soon?
[01:59] <zeeeee> (i'm on dapper if that makes any difference)
[01:59] <Jordan_U> zeeeee, Maybe try backports?
[02:00] <tovella> zeeeee: there must be an emacs channel where you could get a more definitive answer to that question.
[02:00] <zeeeee> Jordan_U: are you implying that it's available in the emacs-snapshot for feisty or something?
[02:00] <nickrud> zeeeee, no one here will know :)  The one in feisty is dec 2006.  You'd probably be luckier asking in #debian, emacs snapshot comes directly from there
[02:01] <Jordan_U> zeeeee, It might be, I am just saying that it may be something to check
[02:01] <zeeeee> ok
[02:01] <Nwallins|home> zeeeee: don't mention ubuntu if you ask in #debian... just ask about the package and any known plans
[02:02] <ProN00b> how do i change brightness of my screen ? (screen interface is at minimum, i need something to config it on X or the nvidia driver)
[02:02] <Nwallins|home> X config has a gamma control
[02:02] <fxfitz> How do I load a module for apache??
[02:02] <zeeeee> Nwallins|home: is it a touchy subject :)
[02:02] <Nwallins|home> zeeeee: you betcha
[02:03] <Zack> Hi I need to know how to Mount my Ipod...
[02:03] <zeeeee> Nwallins|home: wow, really? i was just kidding
[02:03] <Jordan_U> ProN00b, System -> Prefs -> Power Management
[02:03] <nickrud> ProN00b, you'd change the gamma. There's a simple python thing on the net, gammapage, that can use to test and it shows you how to set it up permanently
[02:03] <tovella> Nwallins|home: is Nwallins for New Orleans?
[02:03] <Nwallins|home> tovella: yup
[02:03] <EnsignRedshirt> zeeeee: You were kidding, but Nwallins|home wasn't :)
[02:03] <LinAsH> fxfitz, ln -s /etc/apache2/mods-available/module.conf /etc/apache2/mods-enabled/
[02:03] <zeeeee> do they see ubuntu as leeching off their efforts
[02:03] <ProN00b> Jordan_U, nope, theres nothing there
[02:03] <Nwallins|home> tovella: my adopted home :)
[02:03] <Jordan_U> Zack, If it is FAT 32 then it should just mount automatically
[02:03] <zeeeee> and stealing their userbase
[02:03] <Nwallins|home> zeeeee: they are not interested in supporting ubuntu users
[02:03] <zeeeee> oh
[02:04] <Nwallins|home> zeeeee: they see it as a waste (literally) of time
[02:04] <fxfitz> LinAsH, Thank you
[02:04] <Jordan_U> ProN00b, Strange, there is for me
[02:04] <tovella> Nwallins|home: i thought perhaps that meant you made it BACK home, after katrina.
[02:04] <Nwallins|home> no, I live in Atlanta now.  home from work :)
[02:04] <Zack> Jordan: Well Ubuntu Recognizes it but Amarok says it needs a Mount/Unmount Command
[02:04] <nickrud> #debian has always been a rough place, ubuntu is just another target ;)
[02:04] <nomic> i'm installing xubuntu and it's asking me if i want to set up LVM is this something i should do?
[02:04] <nomic> logical volume management
[02:04] <Nwallins|home> nomic: no
[02:05] <nomic> nwallins .. why not?
[02:05] <Nwallins|home> nomic: not unless you're sure you want to
[02:05] <ProN00b> Jordan_U, i can only set screen to turn off after a specified time
[02:05] <ProN00b> Jordan_U, you are propably on a notebook
[02:05] <Nwallins|home> nomic: it's a big hassle unless you know exactly what you're doing
[02:05] <LinAsH> nomic, no, it's if you've raid or something
[02:05] <nomic> right
[02:05] <nomic> thanks
[02:05] <Jordan_U> ProN00b, Yes, I am, If you aren't shouldn't that control be on the monitor itself?
[02:06] <Jordan_U> Zack, OK, make a mount point for it, like: sudo mkdir /media/ipod
[02:06] <ProN00b> Jordan_U, as i said, it is, but i can't get it low enough, it still hurts my eyes at lowest level
[02:06] <tovella> Nwallins|home: funny, my experience in the Atl is where i got the notion that people pronounce new orleans nwallins...  i spent a year in the Atl, before i could understand my new boss.
[02:06] <Zack> Jordan: Ok lemme try that.
[02:06] <ProN00b> and at highest its like i am looking into gods face
[02:06] <Nwallins|home> tovella: that is funny, because I never heard it pronounced like my nick until i got there
[02:06] <Ta1> Anyone know how to open ports?  I'm trying to run BF2142 and I tried a port checker online and the ports are not open even though I allowed them in my router.. AFAIK I don't have a firewall running on Ubuntu.. I tried directly through the cablemodem as well so it is either ubuntu or comcast..
[02:06] <Jordan_U> ProN00b, You changed the contrast also?
[02:07] <Nwallins|home> tovella: it was always "N'awlins", which is totally inaccurate, from a local perspective
[02:07] <rockets> How do I use prevu to build something from source?
[02:07] <tovella> Nwallins|home: even with today
[02:07] <tovella> Nwallins|home: even with today's economic conditions, i'm glad to be back in New York.
[02:07] <nickrud> ProN00b, you can try xgamma -gamma 0.9 ; if it's still too bright, try a lower number
[02:07] <ProN00b> xgamma doesn't work
[02:07] <Zack> Jordan: It didnt work
[02:07] <ProN00b> a bright white is still a bright white
[02:07] <Nwallins|home> tovella: i love the Big Apple -- most of my friends from NO ended up there
[02:07] <ProN00b> i need brightness, not gamma
[02:08] <Jordan_U> Zack, Then figure out the device name for your ipod by running: mount
[02:08] <Nwallins|home> post-Katrina
[02:08] <jrib> rockets: https://wiki.ubuntu.com/Prevu you might want to try #ubuntu-motu for packaging questions
[02:08] <Zack> Amarok Has an example "Mount%d"
[02:08] <rockets> thanks
[02:08] <Jordan_U> Zack, That is not the command to put into Amerok, that is just the first step to mounting something
[02:08] <Zack> Jordan:well i need Amerok, But i dont understand it
[02:08] <tovella> Nwallins|home: we're still praying & working (activism) for you all.
[02:09] <unagi> ok i dont get it.....every tutorial that tells me to do the command make or make install i get the same error
[02:09] <unagi> any reason why?
[02:09] <Nwallins|home> tovella: my heart is still fond, but I've moved on
[02:09] <nickrud> unagi, something about no gcc or the like?
[02:09] <IndyGunFreak> unagi: well, whats the error.
[02:09] <Jordan_U> Zack, I don't use Amarok so I don't know if it wants something different, I was just going to give you the normal *nix command for mounting your ipod
[02:09] <Sepero> unagi: because compiling sucks
[02:09] <Ta1> Whats the easiest way in Ubuntu to find out what ports are open?
[02:10] <Zack> Hum.
[02:10] <Nwallins|home> tovella: if there were technology work there, I'd certainly consider going back
[02:10] <nickrud> Ta1, sudo netstat -tlp
[02:10] <IndyGunFreak> Compiling is awesome if you're good at it and don't get stuck in dependency hell.
[02:10] <unagi> svn checkout http://avant-window-navigator.googlecode.com/svn/trunk/ avant-window-navigator
[02:10] <unagi> wait
[02:10] <unagi> lol
[02:10] <unagi> make: *** No rule to make target `install'.  Stop.
[02:10] <unagi> unagi@mrunagi-laptop:~/installs/avant-window-navigator$ make
[02:10] <unagi> make: *** No targets specified and no makefile found.  Stop.
[02:10] <unagi> unagi@mrunagi-laptop:~/installs/avant-window-navigator$
[02:10] <Nwallins|home> tovella: but career opportunities suck, unless you're in construction or gov't
[02:10] <Nwallins|home> at this point
[02:10] <Jordan_U> !paste | unagi
[02:10] <ProN00b> how do i change brightness (NOT gamma) of my screen ? (screen interface is at minimum, i need something to config it on X or the nvidia driver)
[02:10] <ubotu> unagi: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic)
[02:10] <Sepero> IndyGunFreak: If awsome means, it fails, breaks alot, and wastes a lot of time. I agree 100%
[02:10] <Ta1> nickrud: how do you open other ports?
[02:10] <Nwallins|home> ProN00b: with your monitor controls
[02:10] <IndyGunFreak> Sepero: it doesn't fail alot..
[02:11] <ProN00b> Nwallins|home, already at minimum
[02:11] <unagi> any ideas?
[02:11] <IndyGunFreak> if you do your job, compiling is guaranteed to work
[02:11] <IndyGunFreak> Music_Shuffle: long time no see..
[02:11] <tovella> Nwallins|home: keep your ear to the ground...  as more rebuilding gets done, the tech opportunities will come.
[02:11] <Music_Shuffle> Indeed :D
[02:11] <IndyGunFreak> where've yo ubeen?
[02:12] <nickrud> Ta1, ah, by ports open I read ports (with apps behind them) listening: You're talking about opening up your firewall?
[02:12] <Jordan_U> unagi, This may be easier, note that I do not know the quality of this repository though: http://awn.wetpaint.com/page/Ubuntu+Feisty+Repository?t=anon
[02:12] <Nwallins|home> tovella: there are little gigs here and there, but nothing to depend on, at this point.
[02:12] <Sepero> unagi: I've been using Linux 5+ yrs, and I say compiling sucks.
[02:12] <tovella> Nwallins|home: understandable.
[02:12] <Ta1> nickrud: Yes, if there is a firewall installed by default.. I assume so
[02:12] <jmg> hey all
[02:13] <Jordan_U> !hi | jmg
[02:13] <ubotu> jmg: Hi! Welcome to #ubuntu!
[02:13] <shorto> hey all, i'm now to linux and i have got a little problem with video playing, when i go full screen (in any player) i get "squares" and it's very annoying to watch. Any ideas?
[02:13] <jmg> i cant make my nomad jukebox zen detect in feisty
[02:13] <Nwallins|home> tovella: every time I visit NYC, it seems I end up at BB King's for some NO band, and there is a big NO reunion :)
[02:13] <jmg> people say it opens under dapper
[02:13] <Jester45> there is a firewall wall installed on ubuntu by default but it doesnt block anything by defualt
[02:13] <brk3> anyone here installed glest?
[02:13] <nickrud> Ta1, no, no firewall by default.
[02:13] <Nwallins|home> iptables?
[02:13] <VERTiG0> If I want to get ndiswrapper from synaptic, do i want ndiswrapper-common or ndiswrapper-utils-1.9?
[02:13] <brk3> use firestarter for a firewall :)
[02:14] <Zack> How do i Create a folder in my File Directory
[02:14] <Sergo> linspire
[02:14] <Nwallins|home> VERTiG0: typically *-common packages get installed automatically as needed
[02:14] <brk3> Zack: mkdir nameoffolder
[02:14] <brk3> anyone play the game glest at all?
[02:14] <Jordan_U> VERTiG0, I doubt that you want to use ndiswrapper for your ethernet card though, if that is still what you are trying to get working...
[02:15] <Ta1> I need specific ports open for Battlefield 2142 .. my router isn't blocking so it has to be a firewall
[02:15] <VERTiG0> well Jordan_U
[02:15] <VERTiG0> oddly enough
[02:15] <VERTiG0> the port i was using on my router won't work for a connection with this laptop
[02:15] <nickrud> Ta1, sudo iptables -L will list any firewall rules that are defined
[02:15] <VERTiG0> but it works fine with my networked printer.
[02:15] <brk3> Ta1: install firestarter and it easy to open the ports from there
[02:15] <VERTiG0> so i just switched ports, problem solved.
[02:15] <VERTiG0> now the project is getting my Linksys WPC54G v1 wifi card to work :)
[02:16] <Zack> Why do i not have Permission to create a Directory?
[02:16] <VERTiG0> the guides i've found suggest using ndiswrapper and using the windows drivers for the card.
[02:16] <unagi> wow after all that i dunno how to start awn
[02:16] <Zack> nvm
[02:16] <cafuego> VERTiG0: Is that a bcm4306?
[02:16] <brk3> Zack: you need to use sudo: sudo mkdir nameofdirectory
[02:16] <Ta1> brk3: does firestarter block everything by default?  I tried installing that and NOTHING would work.. web, gaim, nada
[02:16] <Jordan_U> VERTiG0, Is that broadcom?
[02:17] <liberti> hola
[02:17] <shorto> can anyone tell em how do i leave the "X" so i can install drivers?
[02:17] <VERTiG0> not 100% sure...
[02:17] <brk3> Ta1: no shouldnt do, I just installed it there today and everything still works..
[02:17] <liberti> si alguien me entiende
[02:17] <cafuego> VERTiG0: run 'lspci' with the card inserted.
[02:17] <nickrud> unagi, if you installed that deb someone referred you to, dpkg -L <nameofdeb> | grep bin should show what you need to run
[02:17] <liberti> por favor
[02:17] <liberti> necesito
[02:17] <liberti> ayuda
[02:17] <VERTiG0> apparently it is broadcom...
[02:17] <Nwallins|home> liberti: #ubuntu-es   maybe?\
[02:17] <VERTiG0> not sure of the exact chipset
[02:17] <brk3> Ta1: have installed any other firewall packages that may be interfering?
[02:17] <cafuego> VERTiG0: ok. You don't need windows drivers at all.
[02:17] <IndyGunFreak> !sp
[02:17] <ubotu> Sorry, I don't know anything about sp - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[02:17] <cafuego> VERTiG0: http://ubuntu.cafuego.net/dists/feisty-cafuego/bcm43xx/
[02:17] <liberti> tengo un problema con xmame
[02:17] <VERTiG0> really cafuego
[02:17] <IndyGunFreak> !es
[02:17] <ubotu> Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[02:17] <brk3> are there any channels for ubuntu gaming, im having trouble with getting glest to run
[02:17] <liberti> y esque solo se me ve en pantalla miniatura
[02:17] <Ta1> not that I know of.. I did the default install and haven't added any other firewalls
[02:17] <leonel> liberti: /j #ubuntu-es
[02:17] <liberti> pq??
[02:17] <cafuego> VERTiG0: Remove ndiswrapper, install the bcm43xx-firmware packag. Reboot, enjoy.
[02:18] <liberti> asias
[02:18] <VERTiG0> Broadcom 4306C0 chipset?
[02:18] <Jordan_U> VERTiG0, Any braodcom card
[02:18] <IndyGunFreak> VERTiG0: should be easy
[02:18] <brk3> Ta1: are you 100% sure you have port forwarding set up on your router properly
[02:18] <VERTiG0> glorious.
[02:18] <VERTiG0> thanks guys, i appreciate it.
[02:18] <VERTiG0> will try it.
[02:18] <cafuego> VERTiG0: I use it here on my pc laptop and g4 ibook; works dandy with network manager
[02:18] <Jordan_U> VERTiG0, The package is "bcm43xx-fwcutter"
[02:18] <tovella> Zack: you should be able to create a directory within your home directory, but to create one outside of that, you will have to use "sudo".  it's a security thing with all unix, linux, & bsd based operating systems.
[02:18] <smoopuppy2> how do I add to the ubuntu wiki
[02:19] <Ta1> brk3: yes, and I tried it without the router any.. straight from the pc to the cablemodem
[02:19] <smoopuppy2> i found an easy way to setup an evdo card in ubuntu
[02:19] <IndyGunFreak> smoopuppy2: if you have to ask, maybe you shoudn't be adding. :)
[02:19] <Jordan_U> smoopuppy2, You need to create an account and log in to edit
[02:19] <cafuego> Jordan_U: The one in ubuntu yes, mine isn't (and i *know* my firmware works)
[02:19] <nickrud> smoopuppy2, go to launchpad.net, get yourself an account, then login to the wiki and edit away
[02:19] <smoopuppy2> fyi kppp works great as a evdo client
[02:19] <VERTiG0> okay so what exactly do i need to get from that page, cafuego?  i'm new to installing things within linux.
[02:19] <Jordan_U> cafuego, ?
[02:19] <cafuego> VERTiG0: bcm43xx-firmware_1.3-1ubuntu2_all.deb
[02:19] <brk3> Ta1: and battlefield is it cant connect?
[02:20] <IndyGunFreak> nickrud: does anyone maintain the wiki, to make sure its accurate?
[02:20] <tovella> Zack: are you attempting to create a directory from the command line, or from within the gui?
[02:20] <cafuego> VERTiG0: Just double-click that after downloading.
[02:20] <Zack> OK I have created the Folder but how do i save a File into the folder? When i click save it says I do not have permission
[02:20] <VERTiG0> alriiiiight.
[02:20] <VERTiG0> then reboot, plug the card in, and it should work out of the box?
[02:20] <dardack> someone recommend i come on here for some help with my wireless connection, when someone has a minute
[02:20] <cafuego> Jordan_U: the fwcutter requires you to grab a firmware, and not all listed firmware files work with all cards.
[02:20] <Jordan_U> cafuego, I prefer the bcm43xx-fwcutter as it will automatically update your firmware when new firmware is available
[02:20] <Ta1> brk3: bf2142 requires like 20 different ports open.. and no it says there is no internet connection.. it works fine on my PC
[02:20] <IndyGunFreak> !wireless | dardack
[02:20] <nickrud> IndyGunFreak, some. I used to spend a lot of time on it, and will soon have some time. You're welcome to join in
[02:20] <ubotu> dardack: Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs
[02:20] <eazyass> how do i determine which serial port i have something plugged into?
[02:20] <Ta1> on winblows that is..
[02:20] <cafuego> Jordan_U: And for the 4306, mine works, as I have two.
[02:21] <IndyGunFreak> nickrud: i may one of thesedays
[02:21] <dardack> ubotu: i've read all the help docs and even posted to forum still no help
[02:21] <cafuego> Jordan_U: Oh, it does it automatically now?
[02:21] <nickrud> IndyGunFreak, CategoryCleanup <--
[02:21] <Jordan_U> cafuego, Yes
[02:21] <unagi_> anyone here run awn?
[02:21] <Jordan_U> cafuego, As of Feisty
[02:21] <cafuego> Ha
[02:21] <brk3> Ta1: hm im afraid im not sure what the problem is so, ubuntu definatly doesnt block ports by default. are you running it on wine? maybe its just not very well supported..
[02:21] <Zack> K I have created the Folder but how do i save a File into the folder? When i click save it says I do not have permission
[02:21] <dardack> indygunfreak: thanks for link already read it, still no help
[02:21] <tovella> dardack: ask your question - ubotu is a "bot" - automated responses.
[02:22] <Ta1> no running on cedega and it is one of the fully supported games
[02:22] <shorto> Zack, did you chmod the folder?
[02:22] <brk3> Ta1: maybe you could try asking on the cedega support forums
[02:22] <Zack> Shorto: noo, How to?
[02:22] <Jordan_U> cafuego, And since it downloads the drivers and extracts them it is legal, while your way is technically not ( broadcom refuses to allow distribution of their firmware ) so it is the only way that Ubuntu can do it
[02:22] <Ta1> Speaking of WINE though.. anybody know why a gamepad would not work right in wine?  it works except it acts like it is always being pressed up....
[02:23] <Ta1> brk3: cedega forums aren't very useful..
[02:23] <cafuego> Jordan_U: Yeah, I know mine violates the licensing, just don't much care.
[02:23] <dardack> tovella, i see, um well every so often i get dropped for like 45 to 2 minutes and than comes back up, annoying when playing games, downloading, listen to music, etc.  i have pings going to my router and google. com and can show you what happens there when it happens, also my link signal during this time doubles, once comes back it goes back to normal, um and none of the logs in /var/log are changed when it occurs
[02:23] <cafuego> Jordan_U: I see forcing epople to use windows with your product as a far worse issue.
[02:24] <Jordan_U> cafuego, I have no problem with it :) But it just can't be an "official" solution :)
[02:24] <shorto> anyone 1337 enough to tell em how to kill the X window? :D
[02:24] <cafuego> Jordan_U: oh, sure <heh>
[02:24] <unagi_> anyone here run awn?
[02:24] <tovella> dardack: so this isn't an issue with getting it working, it's more a question of reliability?
[02:24] <dardack> tovella: yes, and its not regular intervals
[02:24] <Jordan_U> shorto, Do you mean an X window or all of X entirely?
[02:25] <Nwallins|home> Jordan_U: I think he wants to drop out of X to a terminal interface
[02:25] <Zack> How do i use "chmod" to create a File?
[02:25] <dardack> tovella: and i can't tell if it's only when i'm acutally doing something online, i've left the pings going when i'm away and when i scroll up as far as the terminal lets me i don't see any of the issue
[02:25] <nickrud> Zack, you use touch to create a file
[02:25] <shorto> Jordan_U, i belive entirely cuz i need to install geforce drivers :D
[02:25] <Nwallins|home> i've wondered the same thing, gdm seems to only shut down if you exit X
[02:25] <GoldeNArX> hey guys. i've got a uli5283 pci sata / raid controller.  standard drivers that come with ubuntu do recognize the sata controller but not the raid part.  drivers are available but for other distros fedora3, suse9, redhat9.  are any of those drivers going to work for me
[02:25] <unagi_> !awn
[02:25] <ubotu> Sorry, I don't know anything about awn - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[02:25] <cafuego> shorto: Can't you just use the Ubuntu packaged ones?
[02:25] <unagi_> !avant window manager
[02:26] <Zack> Nickrud: um, Explain on how to do that. In the terminal in a certain folder.
[02:26] <nickrud> Nwallins|home, ctl-alt-backspace, anywhen. Best done at the gdm login screen
[02:26] <unagi_> !avant-window-manager
[02:26] <nickrud> Zack, touch /path/to/file
[02:26] <Nwallins|home> nickrud: ah, yes -- now i remember -- thanks!
[02:26] <Zack> ok
[02:26] <shorto> cafuego, hmm if i knew that they existed earlyer i wouldt have asked :D are they awalible via apt-get?
[02:26] <Nwallins|home> shorto: try ctrl-alt-bkspc
[02:26] <cafuego> shorto: Yup, linux-restricted-modules and nvidia-glx
[02:26] <Jordan_U> shorto, Yes, also from System -> Administration -> Restricted Driver Manager
[02:27] <Nwallins|home> nickrud: i like the old school login to terminal, then startx to load X
[02:27] <cafuego> shorto: install those, run 'sudo nvidia-glx-config enable', logout, hit ctrl-alt-backspace, login.
[02:27] <shorto> thank you
[02:27] <nickrud> Nwallins|home, I prefer use gdm to skip the login myself. Only person on this machine
[02:27] <tovella> dardack: an intermittent problem with wi-fi connectivity (or any intermittent problem, for that matter) is always the most difficult to troubleshoot.  it's possible that there are unresolved issues with the particular hardware you're using. which wi-fi device, & model of PC are we talking about?
[02:28] <andre_pereira> ZzZzZz
[02:28] <pha|con> dardack: just out of curiosity are you using a linksys wrtg54 router?  mine would drop randomly and i put a linux-based firmware on it and it cleared the problem up
[02:28] <dardack> tovella: the best buy brand pci wireless g, uses Arethos chipset   AR5005G 802.11abg NIC,
[02:29] <dardack> um
[02:29] <Nwallins|home> dardack: my wifi card or router would bomb out if I used bittorrent with default parameters -- forget what the fix was
[02:29] <dardack> pha|con: yes i am
[02:29] <dardack> i think the G one
[02:29] <shorto> Jordan_U,  with this linux-restricted-module do i need to install a specific version? i get a whole bunch of results :)
[02:29] <Zack> OK I got it to make a file but i cant edit it so i can put the code in that i need in it.
[02:29] <dardack> pha|con: never happned in windows tho
[02:29] <IndyGunFreak> those poor linksys wireless routers.
[02:29] <Jordan_U> shorto, Just get -generic and it will keep you up-to-date automatically
[02:29] <pha|con> dardack: sounds like what mine was doing.  dropped all wireless connections....windows linux and psp
[02:30] <shorto> thank you
[02:30] <hatter> what is the equivalent of dvdshrink for linux ?
[02:30] <IndyGunFreak> hatter: acidrip is good
[02:30] <dardack> pha|con: i'm saying it never happened in windows tho
[02:30] <pha|con> dardack: hmmm...if it's just specific to linux then flashing a new firmware on the router probably won't help
[02:30] <Jordan_U> shorto, Or just use System -> Administration -> Restricted Driver Manager and make it one step :)
[02:30] <hatter> IndyGunFreak, thx
[02:30] <IndyGunFreak> hatter: there's others, but i like acidrip most.. ::dvdrip:: is ok to.
[02:31] <dardack> i am using the restricted driver, should i try ndiswrapper?
[02:31] <tovella> dardack: have a look this site: http://nosrednaekim.wordpress.com/tag/linux/kubuntu/
[02:31] <LinAsH> hatter, DVD95
[02:31] <IndyGunFreak> LinAsH: never tried that one.
[02:31] <VERTiG0> cafuego, are you still around?
[02:32] <tovella> dardack: there's a part that says, "Atheros support is broken for the AR5005G in Ubuntu."
[02:32] <LinAsH> hatter, also k9copy
[02:32] <shorto> thank you all for your help now it's reboot time :D
[02:32] <Zack> How can i do this plz
[02:33] <dardack> tovella: see i've read things like that and couldn't tell if that was to even get it to work, or like my problems.  Is there a place that walks me through uninstalling the built in Arethos drivers, i've gotten ndiswrapper to work on my laptop for my belkin, but i tried here and it gave me erros, mainly i think because i haven't figured out how to remove the arethos restricted drivers
[02:33] <WhoNeedszzz> Hi all, ever since I switched to Athalon 64 X2, my monitor won't display the terminal (ctrl+alt+F1), how do I fix this?
[02:33] <Zack> How can i save a file in my File System!!
[02:33] <Zack> ?
[02:33] <VERTiG0> Jordan_U or cafuego?  you guys there?
[02:33] <IndyGunFreak> Zack: is it a file youre downloading?
[02:34] <Jordan_U> VERTiG0, I am
[02:34] <VERTiG0> ah.
[02:34] <Zack> No i am trying to make a Mount command for my ipod
[02:34] <VERTiG0> well i've installed cafuego's stuff, and rebooted
[02:34] <IndyGunFreak> ok.
[02:34] <VERTiG0> and put in my wifi network SSID and wep key and stuff...
[02:34] <VERTiG0> yet no dice.
[02:34] <IndyGunFreak> so what file do you need to save for that?
[02:34] <brk3> anyone know of a greasemonkey script that lets you download from myspace..?
[02:34] <IndyGunFreak> brk3: no don't think so.
[02:34] <Zack> A .fdi file that i need to create but it will not let me save it.
[02:35] <IndyGunFreak> Zack: why not?
[02:35] <WhoNeedszzz> Zack, why would you even want to connect your ipod to linux?
[02:35] <Zack> it says that Permission Is Denied
[02:35] <Jordan_U> VERTiG0, Can you pastebin the output of: sudo modprobe bcm43xx
[02:35] <Zack> To listen to my music why else?
[02:36] <VERTiG0> Jordan_U, sure, let me switch back to my wired connection.
[02:36] <hatter> LinAsH, IndyGunFreak , cool, i will check them out, thx
[02:36] <IndyGunFreak> Zack: if its a long script, save it to your desktop, and then open a terminal, and  type "gksudo nautilus".. and navigate to the folder in question, and move the file there.
[02:36] <WhoNeedszzz> Zach, you do know you can just play music from windows in linux
[02:36] <Nwallins|home> WhoNeedszzz: also, iPods are handy, if not great, portable HDs
[02:36] <ketrox> Zack i connect my ipod tolinux everyday and i never had problem
[02:36] <tovella> dardack: the easiest solution might be to exchange it for a card that's known to work well with linux.
[02:36] <IndyGunFreak> Zack: if its not a long script, you can close w/o saving, open a terminal, type gksudo gedit... create the script, then save it in the appropriate folder.
[02:36] <WhoNeedszzz> anyone know about my display problem?
[02:36] <hatter> and what about firewire capture from the camera ?
[02:36] <Zack> Ok now that i have your attention, I am using Amarok and it says i need a Mount command
[02:37] <dardack> out of curiousity there is no way to run itunes on linux correct?
[02:37] <dardack> tovella: i wish, gonna try ndiswrapper, works great on my belkin, just need to figure out how to remove the built in driver
[02:37] <VERTiG0> Jordan_U, it does nothing.
[02:37] <Music_Shuffle> dardack, not that I know of
[02:37] <IndyGunFreak> Zack: that i can't help you with, but i will say this, when I had trouble getting my Ipod to mount in Amarok, it mounted perfectly with Rhythmbox
[02:37] <VERTiG0> i enter my pass and then it comes back with nothing, just back to a blank prompt
[02:37] <Zack> I just dont understand it the example is "Eject%d"
[02:37] <SAM_theman> Hello guys
[02:37] <Music_Shuffle> Hello
[02:38] <tovella> dardack: i'm not saying you can't get it working, but one way to end lots of frustration is to only buy from vendors who are linux friendly.
[02:38] <Zack> I tried Rythmbox but it will not convert to Acc
[02:38] <Zack> ACC
[02:38] <WhoNeedszzz> Zack, Amarok is fine
[02:38] <WhoNeedszzz> I am using it right now
[02:38] <ketrox> zack use gtkpod
[02:38] <Jordan_U> VERTiG0, Try setting your wireless card to "roaming mode" and then try the network manager applet
[02:38] <Zack> What is your mount code?
[02:38] <IndyGunFreak> Amarok is the best, but i don't know the mount command for an Ipod.
[02:38] <tovella> dardack: if i had an atheros card, i could try some things to help you more.
[02:38] <dardack> tovella: i know, but i read that it worked for people right out, so i got it, maybe that was earlier versions or something
[02:38] <h1st0> exit
[02:39] <dardack> well i know i have to blacklist the bcmx, but also i need to remove ath_pci and ath_hal and i don't know how to do that
[02:39] <Zack> IndyGunFreak: could you please go into your preferences and take a look for me?
[02:39] <IndyGunFreak> Zack: do you get the ipod icon on your desktop?...
[02:39] <IndyGunFreak> yeha, hang on.
[02:39] <VERTiG0> Jordan_U, the network manager applet?
[02:39] <hatter> does anyone know how to change the default window opening position in gnome so it doesnt open new windows in the centre of the screen ?
[02:39] <Jordan_U> VERTiG0, top right corner of the screen
[02:39] <Zack> IndyGunFreak: Yes i do
[02:39] <VERTiG0> i have to use the network manager applet to change the wifi connection to roaming, don't i?
[02:40] <Jordan_U> VERTiG0, No, that is System -> Administration -> Networking
[02:40] <VERTiG0> Jordan_U, you're a genius.
[02:40] <VERTiG0> it works.
[02:40] <TiMoZi> hey
[02:40] <WhoNeedszzz> hehe Zach, I just plugged in my ipod and it works finr
[02:41] <WhoNeedszzz> fine*
[02:41] <VERTiG0> wait, nope.
[02:41] <WhoNeedszzz> Zack*
[02:41] <VERTiG0> i have a 100% connection now
[02:41] <VERTiG0> but no pages work...
[02:43] <TiMoZi> does anybody know how to give the shell a background image?
[02:43] <craigbass1976> VERTiG0, Hey.  I'm back
[02:43] <WhoNeedszzz> Zack, a box should pop up and ask wheter you want to handle it or not, just drop down the list and click apple ipod
[02:43] <Zack> Whoneedszzz: Sync music to it and listen to it
[02:43] <Zack> I did click apple ipod
[02:43] <VERTiG0> hey craigbass1976.  we've got wired working, now we're working on my wifi :)
[02:43] <tovella> VERTiG0: try this from a terminal window: "sudo dhclient wlan0"
[02:43] <WhoNeedszzz> Zack, ok just did
[02:43] <craigbass1976> VERTiG0, what was the wired problem?  Wireless huh?  Glutton for punishment
[02:43] <LinAsH> TiMoZi, just go to Edit/Current Profile/Effects
[02:43] <Zack> did it play?
[02:43] <WhoNeedszzz> Zack, does it show in your devices tab?
[02:43] <Jordan_U> VERTiG0, Can you ping your router?
[02:43] <WhoNeedszzz> yes it plays
[02:43] <VERTiG0> craigbass1976, turns out that a port on my router doesn't like to talk to the internet.  but it works fine with my networked printer.
[02:43] <Zack> WNZ: no it doesnt
[02:43] <VERTiG0> so i merely switched their ports.
[02:43] <WhoNeedszzz> hmmm
[02:43] <Zack> It says i need to connect it and i need a mount code
[02:43] <intelikey> howto, read the cmos clock(rtc) from linux ?
[02:43] <VERTiG0> Jordan_U, network is unreachable.
[02:43] <TiMoZi> LinAsH: thanks, i dont mean the terminal x ap
[02:43] <craigbass1976> VERTiG0, I remember wondering about that.
[02:43] <IceOnly> hello
[02:43] <VERTiG0> tovella, no such device.
[02:43] <TiMoZi> the command line, bash.
[02:43] <IndyGunFreak> Zack: it says its mounted at /media/IPOD
[02:43] <WhoNeedszzz> Zack, remove it and reconnect
[02:44] <IceOnly> i have a question, did anybody nows how i change the video source in ffserver.conf?
[02:44] <WhoNeedszzz> with Amarok open
[02:44] <TiMoZi> ive seen some consoles with it
[02:44] <tovella> VERTiG0: how about "ifconfig"?  what device is shown for the wi-fi, then?
[02:44] <intelikey> TiMoZi with what ?
[02:44] <TiMoZi> background image
[02:44] <VERTiG0> tovella, eth0, eth1, eth1:avah, and lo
[02:45] <TiMoZi> the shell... before X is run
[02:45] <intelikey> TiMoZi frame buffering
[02:45] <VERTiG0> okay i have been asked for my WEP key about 10 times in the past 5 minutes
[02:45] <WhoNeedszzz> Zack...
[02:45] <Zack> It still dont work
[02:45] <VERTiG0> yet i keep inputting it correctly
[02:45] <TiMoZi> intelikey: is that what it's called?
[02:45] <WhoNeedszzz> go to synaptic and make sure all of your files are updated
[02:45] <dardack> can anyone tell me how to either remove or blacklist ath_pci ath_hal?
[02:45] <Zack> ok
[02:45] <LinAsH> TiMoZi, but you will have to recompil your kernel for this I think
[02:45] <intelikey> that's what facilitates it.    usplash is what you are asking about TiMoZi
[02:46] <VERTiG0> okay uh
[02:46] <tovella> VERTiG0: no wi-fi, huh? is your wired connection still plugged in?
[02:46] <VERTiG0> it miraculously works now.
[02:46] <Jordan_U> VERTiG0, Seems like a pattern :)
[02:46] <VERTiG0> no kidding!
[02:46] <intelikey> !usplash > TiMoZi
[02:46] <IceOnly> can anybody help me?
[02:46] <Zack> i marked all upgrades and theres nothing to upgrade
[02:47] <tovella> IceOnly: only i might be able to help you, if you say what your problem is.
[02:47] <WhoNeedszzz> ok
[02:47] <Jordan_U> !anybody | IceOnly
[02:47] <ubotu> IceOnly: A large amount of the first questions asked in this channel start with "Does anyone/anybody..."  Why not ask your next question (the real one) and find out?
[02:47] <Ktravaglini> I am now away - Grad practive - Left at 17:47:32
[02:47] <WhoNeedszzz> Zack, go to the devices tab in Amarok
[02:47] <IceOnly> i wont to stream my webcam with ffserver
[02:48] <IceOnly> put it will open /dev/video and not /dev/video1
[02:48] <Zack> ok
[02:48] <WhoNeedszzz> Zack, at the top under the menu bar, click connect
[02:48] <TiMoZi> intelikey: ok, thanks!
[02:48] <Zack> i did
[02:48] <intelikey> /dev/vidio should be a symlink to /dev/vidio?   you can change the symlink
[02:48] <Zack> it askes for a "Pre-connect command"
[02:49] <WhoNeedszzz> ok
[02:49] <WhoNeedszzz> i got it
[02:49] <tovella> IceOnly: make a symlink to it like this: sudo ln -s /dev/video1 /dev/video
[02:49] <IndyGunFreak> Zack: i just had that problem with my Ipod i can tell youhow i fixed it.
[02:49] <WhoNeedszzz> Zack, go to configure amarok
[02:49] <Zack> YES
[02:49] <IndyGunFreak> Zack: settings Menu/Configure Amarok.
[02:49] <IndyGunFreak> then click on Media Devices
[02:49] <WhoNeedszzz> heh
[02:49] <Zack> ok got it
[02:49] <WhoNeedszzz> same thing i was going to tell him
[02:49] <Zack> ok
[02:49] <IndyGunFreak> where it says Plugin, in the pulldown menu, choose apple ipod
[02:49] <IndyGunFreak> then apply/ok
[02:50] <IndyGunFreak> it should mount it for you
[02:50] <intelikey> so     anyone know how to read the (rtc) from linux ?
[02:50] <SAM_theman> Why the heck it takes so long to download a 5.9mb file on apt-get ??? I am on a 1.5mbs
[02:50] <Zack> lets see
[02:50] <brk3> IndyGunFreak: just in case someone asks that myspace question again :) http://myspacevalley.com
[02:50] <Jordan_U> SAM_theman, The mirror you are using is slow?
[02:50] <IndyGunFreak> brk3: ok.
[02:50] <SAM_theman> wow
[02:50] <Zack> dfkjlfjld, CRASH
[02:50] <IndyGunFreak> crash?
[02:50] <WhoNeedszzz> is there a prog in linux to put music on an ipod>?
[02:50] <Zack> crash handler came up
[02:50] <tovella> IndyGunFreak: i think hwclock does that.
[02:50] <pak33m> help! i cannot access System->Admin->Users and Groups, Network or Services
[02:51] <SAM_theman> WhoNeedszzz, nano video??
[02:51] <IndyGunFreak> WhoNeedszzz: yes, Amarok, Banshee, GTkpod, and a couple others i think
[02:51] <Jordan_U> pak33m, Do you have admin rights to use sudo?
[02:51] <intelikey> nobody ?
[02:51] <WhoNeedszzz> IndyGunFreak, Amarok will put music on?
[02:51] <Zack> It says "knotify" crashed
[02:51] <IndyGunFreak> WhoNeedszzz: yes.
[02:51] <WhoNeedszzz> IndyGunFreak, how?
[02:51] <pak33m> yes i have checked the /etc/groups file
[02:51] <IndyGunFreak> Zack: sorry, i don't use KDE, those terms are foriegn to me
[02:51] <WhoNeedszzz> lol
[02:51] <shorto> Jordan_U, tnx for those tips works fine now :)
[02:51] <WhoNeedszzz> IndyGunFreak, nvm
[02:51] <zaskhya> i dont understand how to install my printer pixma 1500 and 1700
[02:52] <Zack> I dont know what it is either!
[02:52] <Jordan_U> shorto, np
[02:52] <tovella> intelikey: i think hwclock does that.
[02:52] <zaskhya> pls help me
[02:52] <IndyGunFreak> Zack: well, KDE is the devil, as you're finding out..lol
[02:52] <Zack> HEY! i just closed it and reopended and it worked
[02:52] <IndyGunFreak> Zack: well, go figure.. good
[02:52] <Jordan_U> zaskhya, Is it listed in System -> Administration -> Printing ?
[02:52] <WhoNeedszzz> Zack, use xfce
[02:52] <Zack> lets see if it syncs
[02:52] <intelikey> tovella well i thought it did but if so it's wrong and i just set the clock in bios before boot
[02:53] <Zack> how do i get that?
[02:53] <WhoNeedszzz> Zack, xubuntu
[02:53] <IndyGunFreak> Zack: lol
[02:53] <shorto> now another question: i have a sound controller option on my keyboard, the bar seems to go up and down but nothing happens what could be the problem?
[02:53] <IndyGunFreak> sudo aptitude install xfce-desktop
[02:53] <intelikey> tovella is there no way to read the device dirrectly ?
[02:53] <Zack> joy
[02:53] <tovella> intelikey: there is, but i don't remember... let me check.
[02:53] <pak33m> intelikey: yes i have checked the /etc/groups file
[02:53] <IndyGunFreak> KDE just sucks, to slow, and to kiddy lookin.
[02:53] <Zack> isnt xubunt the light version of ubuntu
[02:53] <Zack> ?
[02:54] <Jordan_U> IndyGunFreak, the package name is xubuntu-desktop
[02:54] <zaskhya> but the series of pixma 1500 and 1700 is not on list, its just have pixma 2000
[02:54] <IndyGunFreak> Zack: yeah, but hte GUI is 100% better than KDE.... it really doesn't matter what your hardware is.
[02:54] <WhoNeedszzz> xubuntu is ubuntu with xfce
[02:54] <IndyGunFreak> Jordan_U: thanks for the correction.
[02:54] <Jordan_U> IndyGunFreak, You must be a Debian User :)
[02:54] <WhoNeedszzz> hence the x
[02:54] <IndyGunFreak> Jordan_U: lol
[02:54] <Zack> why dont they use it on the Main ubuntu?
[02:54] <tovella> intelikey: The time shown is always in local time, even if you keep your Hardware Clock in Coordinated Universal Time.
[02:54] <IndyGunFreak> Jordan_U: what makes you say that?
[02:55] <WhoNeedszzz> Zack, who knows
[02:55] <Jordan_U> IndyGunFreak, I think that is the package name in debian :)
[02:55] <tovella> intelikey: it is hwclock.
[02:55] <Zack> jeez, well lets see if this worked
[02:55] <VERTiG0> Okay, I've got a totally stupid question.  my task bar at the bottom has somehow, with my stupidity, moved everything to the far right and has become really small.
[02:55] <IndyGunFreak> Jordan_U: it might be.. never really looked, but yes, i have debian on my laptop
[02:55] <intelikey> tovella so short answer is no.  no way to read it dirrectly,   k  thanks.
[02:55] <Zack> Whoneedszzz: I clicked Disconnect and it said the "unmount command failed"
[02:55] <WhoNeedszzz> ever since I switched to Athalon 64 X2, my monitor won't display the terminal (ctrl+alt+F1), how do I fix this?
[02:56] <WhoNeedszzz> use xfce
[02:56] <IndyGunFreak> Control alt delete
[02:56] <tovella> intelikey: it DOES read it directly, what it shows will be the localtime.
[02:56] <WhoNeedszzz> it will fix it
[02:56] <IndyGunFreak> Zack: right click the IPod icon on your desktop, choose unmount.. then just close amarok.
[02:56] <IndyGunFreak> that happens to me to.
[02:57] <WhoNeedszzz> IndyGunFreak, ctrl+alt+delete locks the computer
[02:57] <IndyGunFreak> WhoNeedszzz: really? ;)
[02:57] <IndyGunFreak> WhoNeedszzz: force of habit, its how i fixed everything under Windows.
[02:57] <WhoNeedszzz> lol
[02:57] <WhoNeedszzz> u mean WinBLOWS
[02:57] <WhoNeedszzz> ;)
[02:57] <Zack> IndyGunfreak: i thought about that but is there a way to fix it in Amarok?
[02:58] <WhoNeedszzz> Zack, just use xfce, all of your problems will be solved
[02:58] <IndyGunFreak> Zack: hmm, maybe, but not that i know of, as long as you unmount it, you can close amarok w/o issue.
[02:58] <lo4fer> i have my windows ntfs partition mounted and am able to browse it in nautilus. question is, eh, i guess a windows question but here goes: where is c:\ located in this windows partition (has xp operatin  system installed on it)?
[02:58] <alliecat> So if I have a question about LaTeX and I'm kind of a noob is there anyone here who can help me out at all or should I look up another channel?
[02:58] <IndyGunFreak> actually Zack reverse that..
[02:59] <IndyGunFreak> close amarok(make sure its not in system tray), then unmount the ipod.
[02:59] <Jordan_U> lo4fer, Your windows partition is "C:"
[02:59] <tritium> alliecat: it's offtopic for this channel, but you may /query me with questions
[02:59] <IndyGunFreak> you'll get a "safe to disconnect" notice.. at least I do in Gnome.
[02:59] <WhoNeedszzz> lo4fer, /medis/sda(or hda)2
[02:59] <Zack> ok, and whoneedszz: your talking to a noooooooobie i dont know what that is! i wanna learn this system tho
[02:59] <WhoNeedszzz> Zack, do the command IndyGunFreak gave you
[02:59] <alliecat> well, it's about texlive and texmaker in ubuntu feisty but still yeah, ok.
[03:00] <tritium> alliecat: then it's not so offtopic
[03:00] <Zack> Ok i got it
[03:00] <Zack> IT WORKS
[03:00] <lo4fer> thanks whoneeds, i just realized what a stupid question it is: that partition IS the c drive. the folder i wanted, which is a subdirectory of c:
[03:00] <IndyGunFreak> joy joy
[03:00] <Zack> Haleloua, however you spell that
[03:00] <lo4fer> is right there at top level (sorry accidentally hit enter there)
[03:00] <IndyGunFreak> lol
[03:00] <Zack> Gracias
[03:00] <Zack> Later
[03:01] <zaskhya> pls help me
[03:01] <Kinks> raor.
[03:01] <alliecat> God I'm going to sound stupid but I have no idea how to make texmaker find the packages in a directory.
[03:01] <alliecat> So I can't build a document.
[03:01] <lo4fer> here's another basic question: where's a suitable place for creating a folder to place some ubuntu .iso's to share on bittorrent?
[03:01] <Jordan_U> zaskhya, Ask your question, if anyone can help they will
[03:01] <lo4fer> or will bittorrent just create a folder when install it?
[03:02] <tritium> alliecat: ubuntu packages?
[03:02] <alliecat> they are latex packages
[03:02] <tritium> alliecat: installed through the repos, or installed by hand?
[03:02] <alliecat> http://doc.gwos.org/index.php/TeXLive_and_Texmaker <--- I used those directions to install texlive and texmaker on my system.
[03:03] <EADG> lo4fer: In your home dir... /home/lo4fer for ex.
[03:03] <zaskhya> i want to ask about printer instalation on ubuntu, i am newer
[03:03] <tritium> alliecat: you should have installed the ubuntu texlive package, and saved yourself a lot of hassle
[03:03] <alliecat> but texmaker kept looking for the files in the old windows directory from when I started my thesis in Windows.
[03:03] <alliecat> tritium: Actually I went ahead and did that after it was looking for the files in the Windows dir.
[03:03] <alliecat> i did an apt-get
[03:03] <Jordan_U> zaskhya, Go to System -> Administration -> Printing, then click on New Printer
[03:04] <zaskhya> my printer is pixma 1500 and 1700 is not on the list
[03:04] <alliecat> And now it's no longer looking in the Windows directory, but it just plain can't find the packages, which are there on the other texlive install.
[03:04] <BloodyTux> soooo
[03:04] <tritium> alliecat: sounds like you're including or inputing some .tex files with old windows path
[03:04] <BloodyTux> anyone use pidgin? is it good?
[03:05] <alliecat> tritium: It's not doing that anymore though, since I installed hte ubuntu texlive package.
[03:05] <IndyGunFreak> BloodyTux: pidgin rocks.. it kills kopete
[03:05] <tritium> alliecat: you installed those texlive package from the ubuntu repos, or from the directions you gave the URL to above?
[03:05] <tritium> alliecat: what's the "other texlive install" you mention above?
[03:05] <alliecat> First I used the ones from the above URL. Then to troubleshoot I tried just installing the package from the ubuntu repos
[03:05] <Jordan_U> zaskhya, You might try the drivers closest to your model
[03:05] <alliecat> And removing the other one.
[03:06] <IndyGunFreak> BloodyTux: but if you dont' want to compile it, just stick with Gaim till Gutsy is released with Pidgin, there's not that much difference
[03:06] <tritium> alliecat: which packages, in particular?
[03:06] <wes_1977> is there a package i can install that will allow me to select a window (terminal for example) and set it to an 800x600 (or other common) size?
[03:06] <K-Ryan> Hi guys
[03:06] <alliecat> I just did an apt-get texlive
[03:06] <tritium> wes_1977: many programs will take the --geometry option from the cli
[03:06] <K-Ryan> How can I terminate a process that needs root?
[03:07] <zaskhya> how about pixma 2000 is that the right driver?
[03:07] <wes_1977> what is the best quality screen recording application available for ubuntu? I'm trying to record high quality screencasts
[03:07] <LinAsH> wes_1977, what for? web development?
[03:07] <tritium> alliecat: yes, but what other LaTeX packages are you using?
[03:07] <lo4fer> drat. bittorrent looks to have been installed by default in feisty, i have now added the package bittorrent-gui. how do i run either of these confounded programs. tried bittorrent and bitttorrent-gui from command line.
[03:07] <alliecat> oh, well the one it can't find is the very first one referenced cite.sty
[03:07] <wes_1977> LinAsH :: for screen casts ... I only want to capture video in an 800x600 box on my 1400x900 desktop
[03:07] <alliecat> I don't even know where to begin in pointing it in the right direction to find it.
[03:07] <alliecat> The file is there.
[03:08] <wx> us
[03:08] <tritium> alliecat: the texlive package doesn't install _everything_.  You may need other packages to get what you need, such as cite
[03:08] <alliecat> I've written a considerable amount of my thesis and am having problems with actually viewing a .pdf of it which is somewhat impeding my progress on the whole matter XD
[03:09] <holycow> hi alliecat
[03:09] <alliecat> Yeah, but I do have the packages elsewhere. I kept the dir where all the packages were from the texlive iso I got from the URL I mentioned previously.
[03:09] <goldbond> hi, what should the mount point of the swap partition be?
[03:09] <alliecat> Hello holycow.
[03:09] <Jordan_U> alliecat, Ubuntu can open pdf files, or did it not render correctly?
[03:09] <LinAsH> goldbond, nowhere
[03:10] <alliecat> Oh no, that's not a problem at all -- I can't even build the sucker!
[03:10] <goldbond> thank
[03:10] <holycow> goldbond, just label it swap during install, goldbond you won't  be a ble to access it from your sysytem tho, only kernel has access to it
[03:10] <tritium> alliecat: use the ubuntu packages.  You could always install texlive-full to be on the safe side
[03:10] <alliecat> Because the latex packages are in the wrong place
[03:10] <niuq> hello where can i get some documentation for using gftp?
[03:10] <holycow> if i remember alliecat knows more than most of us about ubuntu/debian
[03:10] <alliecat> haha no
[03:10] <alliecat> you got the wrong kitty
[03:10] <tritium> niuq: all packages store documentation under /usr/share/doc/<packagename>
[03:10] <holycow> well hi anyway
[03:10] <holycow> hehe
[03:11] <holycow> what is the problem exactly? pdfs should at least try to open, do they render?
[03:11] <niuq> tritium: thank you man
[03:11] <holycow> have you tried multiple pdf clients?
[03:11] <alliecat> I'm a noob to this distro and to Linux in general, but have been using UNIX based systems for quite some time.
[03:11] <tritium> holycow: first he has to build them properly with LaTeX
[03:11] <alliecat> she ;)
[03:11] <alliecat> But yeah
[03:11] <tritium> alliecat: sorry ;)
[03:11] <alliecat> I am not building it correctly yet!
[03:11] <holycow> aha right
[03:11] <holycow> its a latex export then? oh right
[03:12] <alliecat> Using LaTeX for my thesis
[03:12] <tritium> holycow: not exactly, but sort of
[03:12] <craigbass1976> what is an evms.engine.log ?
[03:12] <alliecat> Because open office isn't really very good for it.
[03:12] <tritium> alliecat: good choice ;)
[03:12] <holycow> we are going to sponsor an extension for oo that will show where styles start and end
[03:12] <holycow> we have that problem too
[03:12] <roho> alliecat: are you female? <G>
[03:13] <alliecat> haha I shouldn't let that on. I've been on the internet long enough to know better
[03:13] <alliecat> I'm installing the texlive-full
[03:13] <tritium> roho: should konw better...
[03:13] <Stormx2> o.O
[03:13] <wes_1977> what is the best quality screen recording application available for ubuntu? I'm trying to record high quality screencasts
[03:13] <Zawk> after doing a Console Login, how can I go about getting the graphical login back? Whenever I restart the Ubuntu progress bar shows up and once it finishes it goes straight to the command line. I tried startx, which works, but I'd rather go straight to X :)
[03:14] <tritium> !best
[03:14] <ubotu> Usually, there is no single "best" application to perform a given task. It's up to you to choose among a number of different applications, depending on your preferences, the features you require, and other factors.
[03:14] <Stormx2> wes_1977: Check out recordMyDesktop, that can record lossless if need be.
[03:14] <tritium> Zawk: sudo telinit 2.  how did you disable graphical login?
[03:14] <Cristian29> exit
[03:14] <tritium> Zawk: did you chmod -x /etc/init.d/gdm?  If so, you'll need to chmod +x it now
[03:15] <alliecat> :o
[03:15] <craigbass1976> !evms
[03:15] <ubotu> Sorry, I don't know anything about evms - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[03:15] <santi> can anyone help me about intalling amsn ?
[03:15] <Zac1> Santi: all you need is Gaim
[03:15] <Zawk> tritium, I didn't disable it. I went to the login screen (KDE's) and hit Console Login so I could install some drivers w/o X running.
[03:15] <tritium> santi: it's in the repos.  sudo apt-get install amsn
[03:16] <Zac1> I actually found it easier to use than amsn.
[03:16] <tritium> Zawk: I see
[03:16] <roho> tritium: yeah, i do.  i was kidding.  i just admire that people still use latex
[03:16] <Zawk> tritium, after that it wouldn't go back to graphics. I'll try that chmod thing though.
[03:16] <santi> but i want the newest one
[03:16] <tritium> roho: it's still a standard in academia, and nothing produces mathematics as beautifully as TeX
[03:16] <SAM_theman> !firefox
[03:16] <ubotu> firefox is the default web-browser on Ubuntu. To install the latest version, see https://help.ubuntu.com/community/FirefoxNewVersion Installing plugins: https://wiki.ubuntu.com/FirefoxPlugins
[03:17] <tritium> roho: it's also a standard in scientific and engineering journals, as well as other fields
[03:17] <roho> tritium: yeah, i remember reading that in the faq.  what is the front-end for latex?
[03:17] <santi> !amsn
[03:17] <ubotu> Sorry, I don't know anything about amsn - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[03:17] <alliecat> Yeah, I'm in the Genetics field.
[03:17] <tritium> roho: there is no standard front end.
[03:17] <akromyk> what is the equivalent of "tracert"
[03:17] <roho> roho: well how about just naming one?
[03:17] <roho> akromyk: traceroute
[03:17] <alliecat> Unfortunately nobody in my field has any idea how to use LaTeX at all and I have to put it into an editable .pdf file for them
[03:17] <akromyk> thanks
[03:18] <alliecat> so they can make changes for me
[03:18] <roho> heh
[03:18] <tritium> alliecat: we'll get you up and running
[03:18] <roho> !kubuntu
[03:18] <ubotu> Kubuntu is Ubuntu with KDE, the K Desktop Environment, instead of Gnome. See http://kubuntu.org for more information - For support: #kubuntu - See also !KDE
[03:18] <roho> !upgrade
[03:18] <ubotu> For upgrading, see the instructions at https://help.ubuntu.com/community/UpgradeNotes
[03:18] <alliecat> I used it on Windows previously and got a new laptop, decided to throw Ubuntu on here to give it a shot and liked it, so I took Windows off cause HDD space is at a premium on a laptop
[03:18] <holycow> alliecat, wow, i thought all uni types had to learn latex
[03:18] <santi> The version i want to install is amsn-0.97RC1, how to ?
[03:19] <tritium> alliecat: cite.sty is in the tetex-extra package
[03:19] <tritium> holycow: not so much anymore
[03:19] <alliecat> holycow: Unfortunately it isn't. I go to a decent school and almost nobody in the biology department even knows what I'm talking about.
[03:19] <holycow> goddamned ms
[03:19] <trogdor> holycow: heh, no.  I work at a uni, and everyone just uses Word and Excel :-/
[03:19] <tritium> easy there, holycow
[03:19] <Talaman72> is there a wine channel on here?
[03:20] <holycow> lazyness and mediocrity ticks me off :)
[03:20] <roho> alliecat: what front-end do you use for latex?
[03:20] <SAM_theman> #wine
[03:20] <trogdor> a few of my users use tex/latex, but they're the exception
[03:20] <alliecat> texmaker
[03:20] <kracker> hmm, so i have a configuration problem. I had a problem
[03:20] <tritium> We don't need no stinking LaTeX frontends
[03:20] <alliecat> I haha
[03:20] <trogdor> though I must admit I know nothing of LaTeX, heh.  I don't have to write papers :-P
[03:20] <SAM_theman> !cedega
[03:20] <ubotu> cedega is a project based on WINE, aimed at running Windows games on Linux. For more info, see http://help.ubuntu.com/community/Cedega
[03:21] <alliecat> I need to do this in the next month with as little headache as possible! ;)
[03:21] <alliecat> My defense is July 19th
[03:21] <alliecat> It's only for undergrad honors, but still it's important to me.
[03:22] <tritium> alliecat: let's make sure to review all of your \usepackage{} lines, so we get all the packages you need installed
[03:22] <jramsey> i get totem could not play file xxx.mp3; you might need to install plugin
[03:22] <jramsey> any ideas what plugin i need?
[03:22] <tritium> !mp3 > jramsey
[03:22] <kracker> I accidentally installed my system under the wrong keyboard layout, now upon my first reboot i am wondering how I can change the keyboard layout back to en-US (utf8) to get the system running again
[03:22] <alliecat> I figured on getting the extras and seeing what wasn't in it there.
[03:22] <roho> so if someone wants to change from ubuntu to kubuntu, do you just have to install kubuntu-desktop?
[03:23] <holycow> yup
[03:23] <holycow> roho, thats it
[03:23] <tritium> alliecat: apt-file is _very_ useful.  You can install it, run sudo apt-file update, and then (for example) apt-file search cite.sty, to find what package it's in
[03:23] <digin4> what's the name of the package to be able to compile source? build essensials??
[03:23] <Jordan_U> roho, Yes, but that will leave you with both Gnome and KDE, and the Apps that come with both
[03:23] <tritium> !b-e > digin4
[03:23] <alliecat> oh wow thanks so much tritium
[03:23] <holycow> build-essential
[03:23] <tritium> alliecat: :)
[03:23] <roho> Jordan_U: there isn't some script that converts better?
[03:23] <Kaitlyn2004> I'm having problems setting up my network connection on newly installed Ubuntu
[03:23] <digin4> thanks tritium
[03:23] <splott> hello people
[03:24] <Kaitlyn2004> It seems to have gotten an IP properly from my router, but apart from that... I can't use the net..
[03:24] <Jordan_U> roho, If you want to go all KDE then just install kubuntu-desktop and remove Ubuntu-desktop and its dependencies
[03:24] <SAM_theman> !ntfs
[03:24] <ubotu> To view your Windows/Mac partitions see https://help.ubuntu.com/community/AutomaticallyMountPartitions . For write access see !ntfs-3g or !fuse
[03:24] <splott> i have the ubuntu for 64bit running and I seem to be missing glibc...anyone know how to get it?  want to run Enemy Territory...
[03:24] <jramsey> anyone know what plugin is needed to play mp3 files?
[03:24] <roho> Jordan_U: that's it? ok, but will i have any broken libraries or crazy stuff like that?
[03:25] <Jordan_U> roho, Nope
[03:25] <roho> excellent
[03:25] <splott> j_ramsey dunno, but I think they come with vlc. :)
[03:25] <kracker> Since I'm looking for a way to change to rescue the newly installed system by editing some configuration file (wince) to change the console keyboard language back to en-US.utf8
[03:25] <Xenguy> !restricted | jramsey
[03:25] <ubotu> jramsey: For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats
[03:25] <Jordan_U> roho, Use --auto-remove when you remove ubuntu-desktop though, or it won't remove the dependencies
[03:25] <Kaitlyn2004> anyone... help me?
[03:25] <Elliot_1> does anyone know if it is possible to install Microsoft word on ubuntu
[03:25] <roho> Jordan_U: *nod*
[03:26] <roho> thanks
[03:26] <Jordan_U> Elliot_1, It is, with wine
[03:26] <splott> why would you want Word when you can have OpenOffice?
[03:26] <splott> anyone know about glibc?
[03:26] <tritium> roho: or, use aptitude
[03:26] <Nwallins|home> Elliot_1: also check out crossoveroffice, which is based on wine
[03:26] <roho> tritium: how about synaptic?
[03:26] <craigbass1976> Kaitlyn2004, Sheesh, this seems to be happening a lot today.  Rather than gunk up the channel, can you open a dialogue with me?
[03:26] <niuq> i actually think office it is better than open office, just a thought
[03:26] <tritium> roho: it doesn't auto-remove dependencies either
[03:26] <Elliot_1> how does it work i have wine but i cant figure out how to work it
[03:27] <BASHBANG> Hi all, just checking if repo's are down for anyone here?
[03:27] <Jordan_U> roho, I don't think that synaptic has an equivalent function
[03:27] <roho> i can just run autoremove after the fact though, correct?
[03:27] <tritium> splott: what's the problem?
[03:27] <holycow> niuq, its actually not, we have tested out both extensively and mso is largely ahead in excel mostly
[03:27] <holycow> for pretty much anything else, oo is killer
[03:27] <holycow> but thats based on our needs
[03:27] <Jordan_U> roho, After installing kubuntu yes, after removing ubuntu-desktop, sort of no
[03:28] <roho> so if i use aptitude, i won't have to worry about that at all?
[03:28] <splott> tritium when I try to install ET it says it can't handle glibc2.0, when I do a locate I don't see glibc at ALL.
[03:28] <craigbass1976> holycow, can access synch up to different sql databases (post, my, etc) like oobase?
[03:28] <Xenguy> Elliot_1: another strategy, if you have fast hardware: you could install Virtualbox, then install windows as a virtual machine, then install Wyrd
[03:28] <craigbass1976> Kaitlyn2004, ?
[03:28] <Elliot_1> Xenguy thnx but is there a tutorial how to set up wine
[03:28] <tritium> splott: a default feisty install should only have libc6 and libc6-i686 installed
[03:28] <lo4fer> all right so i've installed ktorrent. is there somewhere with a tutorial on how i can start sharing my ubuntu .iso? or in order to seed to i have get the .iso through the torrent to begin with?
[03:28] <Xenguy> Elliot_1: this allows you to run windows/wyrd under linux ;-)
[03:28] <Kaitlyn2004> craigbass1976: i msged u?
[03:28] <niuq> holycow: what about power point??, power point y really ahead from presentation i think, i've used it, and well mso 2007 it's pretty cool i think
[03:28] <splott> tritium how do I get what I need then?
[03:28] <holycow> craigbass1976, good questions, we would never use something like msaccess
[03:28] <Xenguy> !wine | Elliot_1
[03:29] <craigbass1976> Kaitlyn2004, What?  Grrr
[03:29] <holycow> oo's powerpoint is powerfull
[03:29] <Xenguy> hrm
[03:29] <tritium> splott: I don't know what your game needs
[03:29] <kitsune> anybody know how to rip the subtitles using k9copy? I have them checked, but they don't show when I play the vid. Yes, I have subtitles enabled in the video player. I'm running Feisty Fawn
[03:29] <craigbass1976> holycow, I wouldn't touch it with a ten foot fiberglass rod either, I was just curious
[03:29] <Kaitlyn2004> craigbass1976: I got your private message to...?
[03:29] <ubotu> Elliot_1: wine is a compatibility layer for running Windows programs on GNU/Linux. See https://help.ubuntu.com/community/Wine for more information.
[03:29] <Elliot_1> how does Wine work
[03:29] <splott> tritium it says "This installation doesn't support glibc-2.0 on Linux / unknown(tried to run setup)"
[03:29] <Xenguy> ahh
[03:29] <holycow> i don't see where it is ahead at all, its just slides.  the only thing people don't like about oo presentation is that it can't import powerpoint perfectly and thats hardly oo's fault
[03:29] <BASHBANG> try turning on subtitles from your dvd player
[03:29] <alliecat> I have to use oo's powerpoint all the time
[03:29] <Xenguy> Elliot_1: see https://help.ubuntu.com/community/Wine
[03:29] <Elliot_1> ok thnx il read up about it and let you know if i have ne issues
[03:30] <craigbass1976> Kaitlyn2004, the one that said "You there?"
[03:30] <Kaitlyn2004> got that one too
[03:30] <niuq> !wine | Elliot_1
[03:30] <ubotu> Elliot_1: wine is a compatibility layer for running Windows programs on GNU/Linux. See https://help.ubuntu.com/community/Wine for more information.
[03:30] <Kaitlyn2004> craigbass1976: can we just join a channel? #ubuntu1976 :)
[03:30] <holycow> craigbass1976, *nod* exactly for that reason we haven't spent any time really looking into questions like that
[03:30] <craigbass1976> Sure
[03:30] <tritium> niuq: Apple's Keynote beats Powerpoint hands-down.  It's based on pdf
[03:30] <lo4fer> aren't subtitles stored in a separate file on the original dvd?
[03:30] <holycow> tritium, that is true
[03:30] <holycow> VERY true
[03:30] <gloinunit> any suggestions for a good mp3 application? totem is awful
[03:30] <Music_Shuffle> !mp3
[03:30] <BASHBANG> are the repositories or ubuntu.com down for anyone else here?
[03:30] <niuq> never tried it before
[03:30] <ubotu> For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats
[03:30] <holycow> gloinunit, apt-cache search mp3
[03:31] <holycow> :)
[03:31] <tritium> BASHBANG: no
[03:31] <holycow> go crzy
[03:31] <holycow> crazy
[03:31] <gloinunit> lol
[03:31] <gloinunit> i asked for a suggestion ;o
[03:31] <BASHBANG> thx
[03:31] <gloinunit> what do you use
[03:31] <lo4fer> gloinunit: amarok?
[03:31] <Jordan_U> gloinunit, Amarok is highly sugested
[03:31] <splott> tritium?  no suggestions??
[03:31] <Music_Shuffle> !amarok
[03:31] <ubotu> Amarok is an audio player for Linux with an intuitive interface. The latest version is 1.4.3 for Dapper and 1.4.5 for Edgy and packages are  available for Kubuntu at www.kubuntu.org See https://help.ubuntu.com/community/Amarok
[03:31] <Frogzoo> Elliot_1: don't use the ubuntu wine repo which is dated, use the budgetdedicated repo mentioned in the ubuntu wiki doc
[03:31] <Elliot_1> gloinunit use VLC
[03:31] <gloinunit> hmm
[03:31] <Music_Shuffle> !banshee
[03:31] <ubotu> Audio (Ogg, MP3...) players: Audacious, Banshee, Beep Media Player, Quod Libet, Rhythmbox, XMMS (GTK/Gnome based) and Amarok, JuK (Qt/KDE based).  Video players: Totem, Xine, MPlayer, VLC, Kaffeine  -  See also !codecs
[03:31] <gloinunit> VLC is good for movies
[03:32] <Music_Shuffle> There you go gloinunit
[03:32] <gloinunit> not for music though imo
[03:32] <kitsune> Anybody point me in the direction of k9copy help? Is there a channel for kde apps?
[03:32] <tritium> alliecat: are things going well now with your LaTeX issues?
[03:32] <Jordan_U> kitsune, There is #kubuntu
[03:33] <kitsune> Jordan_U: thanks. I'll look into it
[03:33] <Xenguy> kitsune: re k9copy: could the problem just be the particular DVD?
[03:33] <lo4fer> bueller? how to seed? i have the file already, do i have to go get the torrent and associate the two in order to share?
[03:33] <Xenguy> kitsune: IOW, have you used k9copy successfully on any DVD yet?
[03:33] <bbhrawks> Welcome to another edition of the internet
[03:33] <kitsune> Xenguy: I don't think so. I've tried 2 other dvds
[03:33] <skyfalcon866> will 15GB fill up fast
[03:34] <Music_Shuffle> skyfalcon866, for which partition?
[03:34] <Perdente> hola
[03:34] <skyfalcon866> root
[03:34] <skyfalcon866> not home
[03:34] <Music_Shuffle> 15 should work.
[03:34] <Xenguy> kitsune: hrm, so there's no baseline established yet - I wonder what the problem could be?
[03:34] <alliecat> tritium: Still installing stuff, I'll let you know though. :)
[03:34] <kitsune> I think it is a bug in Feisty
[03:35] <tritium> alliecat: ok
[03:35] <Xenguy> kitsune: do you have that libcss2 thingie installed?
[03:35] <skyfalcon866> not /home '
[03:35] <kitsune> Xenguy: one sec...
[03:35] <Jordan_U> !dvd | kitsune
[03:35] <ubotu> kitsune: For playing DVD, see http://help.ubuntu.com/ubuntu/desktopguide/C/video.html - "libdvdcss2" can be found at http://wiki.ubuntu.com/SeveasPackages - Try k9copy (available in !Universe) for backing up DVDs
[03:36] <Xenguy> kitsune: I'm thinking of 'libdvdcss2' apparently
[03:36] <kitsune> Jordan_U: thanks
[03:36] <skyfalcon866> should i run xubuntu on a 933Mhz pentium 3 with 512 mb ram
[03:36] <Jordan_U> kitsune, np
[03:36] <niuq> sure
[03:36] <SAM_theman> 1maya
[03:36] <SAM_theman> !maya
[03:36] <ubotu> Sorry, I don't know anything about maya - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[03:36] <kitsune> Xenguy: yeah. I have that...
[03:37] <|_ocke> skyfalcon866, yes
[03:37] <Xenguy> kitsune: K, just checking
[03:37] <|_ocke> itll be way sweet
[03:37] <|_ocke> with 256 definitely
[03:37] <roho> Jordan_U: not sure if you answered me, but does aptitude automatically run auto-remove?
[03:37] <skyfalcon866> i am running ubuntu and it is fine
[03:37] <reya276> how can I get flash to show on opera for ubuntu
[03:37] <tritium> roho: yes
[03:37] <SAM_theman> !beryl
[03:37] <ubotu> beryl is a window manager that takes advantage of an OpenGL accelerated X environment. Help in #ubuntu-effects
[03:37] <roho> k
[03:37] <Xenguy> kitsune: are you interested in AVI output, or does it have to be DVD quality?
[03:37] <|_ocke> with 512, not REALLY necessary but itll perform way better especially with a few progranms running
[03:38] <kitsune> Xenguy: I'd actually prefer avi. I only have a 40gb hard drive ^_^
[03:38] <|_ocke> with 10 firefox tabs. 4 xchat windows, gaim, xmms, etc etc
[03:38] <|_ocke> gets slow in gnome
[03:38] <Jordan_U> roho, Sort of, it runs an equivalent function that I believe only works for packages installed with aptitude
[03:38] <Xenguy> kitsune: me too ;-)  I *really* have come to like 'dvdrip'...
[03:38] <lo4fer> how do i check my current ubuntu version?
[03:38] <kitsune> Xenguy: I'm trying that right now...
[03:39] <Xenguy> kitsune: it is fussy to set up (just a bit), but once you satisfy its dependencies, it works quite nicely :-)
[03:39] <Jordan_U> lo4fer, lsb_release
[03:39] <|_ocke> you could end up with swapping problems where itll stope for 15-20 minutes straight trying to page in and out stuff and yoyu cant even click anything to change anything, even takes 5 mins for ctrl+alt+f1 to load CLI
[03:39] <Jordan_U> lo4fer, lsb_release -a
[03:39] <MissterX> hello - anyone has experience with ndiswrapper (and nt wireless) driver contra ubuntu driver?
[03:39] <Xenguy> kitsune: I usually do ~700Mb, and always '2-pass' (takes longer but better quality)
[03:40] <kitsune> Xenguy: thanks. I'll look into that
[03:40] <Xenguy> kitsune: have fun
[03:41] <fuzzyhair> How do I register for this irc?
[03:41] <rich__> !paste
[03:41] <ubotu> pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic)
[03:41] <niuq> i am reading the gftp's documentation and not sure what a bookmarks is
[03:41] <Jordan_U> !register | fuzzyhair
[03:41] <ubotu> fuzzyhair: Information about registering your Freenode nick is at http://freenode.net/faq.shtml#contents-userregistration
[03:41] <niuq> there is any gftp channel?
[03:41] <fuzzyhair> !register
[03:41] <goldbond> i just installed ubuntu on my macbook on a separate partition. i thought a boot loader was being installed as well, but only macos boots
[03:41] <goldbond> did i do something wrong?
[03:41] <niuq> i know here is not the right place for asking about gftp
[03:42] <Flannel> goldbond: Is it a PPC or an x86 mac?
[03:42] <Jordan_U> goldbond, Did you install rEFIt ?
[03:42] <Xenguy> niuq: I don't see why not
[03:42] <Jordan_U> Flannel, x86 ( macbook )
[03:42] <goldbond> x86
[03:42] <goldbond> i didnot install refit
[03:42] <niuq> Xenguy: i just thought this was a pure ubuntu support channel
[03:43] <Xenguy> niuq: I would assume (without really knowing) that a bookmark would be a site you do file transfer to/from on a regular basis?
[03:43] <alliecat> tritium: Success on all packages :)
[03:43] <Jordan_U> goldbond, You need to either hold down the option key at startup and choose to boot "windows" ( Apple figured any os other than OSX must be windows... ) or install rEFIt in OSx
[03:43] <Xenguy> niuq: I think general software questions are fine
[03:43] <niuq> Xenguy: ohhh, ok, thank you! :)
[03:44] <tritium> alliecat: excellent :)
[03:44] <Xenguy> niuq: no problemo
[03:44] <alliecat> yay a pdf of my thesis thanks guys.
[03:44] <bbhrawks> Xenguy> My email client keeps stopping.
[03:44] <tritium> alliecat: good luck with your dissertation.
[03:44] <Flannel> goldbond: GRUB (Ubuntus default bootloader) doesn't work with EFI yet, so you've gotta work with somethign that does support EFI (elilo, for instance, or whatever else)
[03:44] <Xenguy> niuq: as in, you would bookmark such a site
[03:44] <SAM_theman> !firefox
[03:44] <ubotu> firefox is the default web-browser on Ubuntu. To install the latest version, see https://help.ubuntu.com/community/FirefoxNewVersion Installing plugins: https://wiki.ubuntu.com/FirefoxPlugins
[03:44] <Jordan_U> Flannel, Intel macs have BIOS emulation
[03:45] <Flannel> Jordan_U: see, I knew there was a reason I asked my first question ;)
[03:45] <niuq> Xenguy: it is like a rapidshare site, or i am totally lost?
[03:45] <alliecat> 57 pages so far. probably got another 45-50 in me.
[03:45] <reya276> oh yes I know that but I'm just trying to get flash working on opera
[03:45] <lo4fer> is it dangerous to forward ports for torrent sharing?
[03:45] <Justasking> !opera
[03:45] <ubotu> opera is an advanced and free (only as in price) web browser.  Install it via Applications->Add/Remove..., making sure that "Show commercial applications" (dapper only) is checked. For more info on opera please see: https://help.ubuntu.com/community/OperaBrowser
[03:46] <goldbond> jordan_U: how do i install refit?
[03:46] <Xenguy> niuq: I think you lost me ;-)  What is the question?
[03:46] <Justasking> >=] 
[03:46] <Juliao> hi everyone
[03:46] <Xenguy> bbhrawks: huh?
[03:46] <reya276> and this will install the flash plugins with it as well
[03:46] <tritium> alliecat: ah, the memories
[03:46] <goldbond> jordan_U: nm, thanks anyway
[03:46] <reya276> also how come firefox won't play wmv files
[03:46] <alliecat> tritium: thanks a ton for all of your help and for letting me know about apt-file
[03:46] <Jordan_U> goldbond, https://help.ubuntu.com/community/MacBook
[03:46] <vecina> How come running a GLX session makes all my text painfully small?
[03:47] <reya276> I downloaded all the gstreamer restricted plugins
[03:47] <tritium> alliecat: no problem.  I was once in your position too.
[03:47] <Markeda> Any suggestions for a good C++ compiler?
[03:47] <Jordan_U> reya276, You probably need w32codecs
[03:47] <davfigue> gcc
[03:47] <Flannel> Markeda: g++ (gcc)
[03:47] <reya276> I got those too
[03:47] <tritium> Markeda: just install build-essential, and use gcc
[03:47] <niuq> Xenguy: ok, a bookmark it is just a site for transfer stuffs?
[03:47] <Markeda> All right. Thank you, all.
[03:47] <Nutubuntu> How can I start to troubleshoot a failing Feisty install? Box is a new AMD 64 X2, new disks (both now extensively tested); cd checksum is correct, but installation has blown up five times now. Twice it just won't boot; three times it fails during install because the kernel can't be installed. Alternate Kubuntu Feisty CD; setting up RAID1 using md and so manually partitioning.
[03:48] <cycom> Nutubuntu: which disc are you using?
[03:48] <Jordan_U> Nutubuntu, Is your RAID controller purely hardware controller
[03:48] <Jordan_U> ?
[03:49] <cycom> 64 bit or 32?
[03:49] <Nutubuntu> cycom,  using Seagates ... Jordan_U
[03:49] <Xenguy> niuq: here's my idea (which could be wrong of course): if you use a web browser, you might bookmark your commonly visited web sites; in the same way, if you use gftp for transferring files, you might bookmark ftp sites (or whatever) that you frequently visit.  Does this make sense?
[03:49] <pak33m> help! i cannot access System->Admin->Users and Groups, Network or Services
[03:49] <cycom> Nutubuntu: no, the install dic.
[03:49] <rcbaxter_> Has anyone seen the following error when removing packages?  subprocess post-removal script returned error exit status 127
[03:49] <cycom> disc*
[03:49] <Nutubuntu> Sorry ... Jordan_U, using software raid; cycom, using the 32 bit version, not 64
[03:49] <Jordan_U> !raid | Nutubuntu
[03:49] <cycom> Nutubuntu: hrm.
[03:49] <ubotu> Nutubuntu: Raid and LVM --> very easy guide for alternate CD : http://users.piuha.net/martti/comp/ubuntu/raid.html Tips and tricks for RAID and LVM can be found on https://help.ubuntu.com/community/RaidConfigurationHowto and http://www.tldp.org/HOWTO/LVM-HOWTO
[03:50] <niuq> Xenguy: it's like saving on "my favorites" the sites i visit
[03:50] <tak> I installed server 7.04 x86 last nite and now I get wacky response times.. =(  eg, When I ping yahoo.com I get exactly 40ms and 50ms responses. Other hosts on the same network see ~150ms (and change) to yahoo.com. mtr sees similar results, but tracepath does not so, I'm asuming it's only related to ICMP.
[03:50] <Juliao> ive a problem with ubuntu, everything was going really well, when i decided to install ATI Driver from ubuntu (because ati driver from ati site wasnt openning, the archive .RUN werent function, and archives ended with PACKAGE and DEBIAN werent working too) ok, when the installation ended, ubuntu told-me that the system had to reboot, so i did that. when the boot began, the load bar stoped in a part of the begin and 5 minutes after its stopped, a wind
[03:50] <Xenguy> niuq: yeah, or so I assume
[03:50] <Nutubuntu> Give me a little while to read those links, Jordan_U & cycom
[03:50] <niuq> Xenguy: yeah i think it made sense ^_^)!
[03:51] <vecnah> :)
[03:51] <Xenguy> niuq: OK :-)
[03:51] <Nutubuntu> t/y to both of you :)
[03:51] <navets> is there a channgel I can go to for html help?
[03:51] <Markeda> OK, here's a good, dumb questions... After installing build-essential, where does that go to to access it...?
[03:51] <Juliao> ive a problem with ubuntu, everything was going really well, when i decided to install ATI Driver from ubuntu (because ati driver from ati site wasnt openning, the archive .RUN werent function, and archives ended with PACKAGE and DEBIAN werent working too) ok, when the installation ended, ubuntu told-me that the system had to reboot, so i did that. when the boot began, the load bar stoped in a part of the begin and 5 minutes after its stopped, a wind
[03:51] <niuq> Xenguy: ok thank you, i will continue my reading ^^! i'll be asking stuffs soon for sure
[03:51] <Jordan_U> !repeat | Juliao
[03:51] <ubotu> Juliao: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. You can search https://help.ubuntu.com or http://wiki.ubuntu.com while you wait. Also see !patience
[03:51] <Xenguy> !repeat > Juliao
[03:51] <tritium> Markeda: it's a meta-package that installs a few other packages, including gcc.  You can now use g++ from the command line
[03:52] <Xenguy> niuq: yw, have fun
[03:52] <Markeda> Ah... command line stuff... Guess I need to get used to it eventually. Thanks.
[03:52] <niuq> Xenguy: i will ^^
[03:52] <Nutubuntu> While I'm thinking of it ... is there a listing of the "!" commands that ubotu responds to?
[03:52] <Juliao> does anybody knows?
[03:53] <Jordan_U> Juliao, When you said that other things weren't working, did they not run at all or did they possibly run and screw things up?
[03:53] <Pici> Nutubuntu: http://bots.ubuntulinux.nl/factoids.cgi
[03:53] <skyfalcon866> how do i defrag ubuntu
[03:54] <Jordan_U> !defrag | skyfalcon866
[03:54] <ubotu> skyfalcon866: defragmentation is not needed for Ext3 and ReiserFS filesystems. They are much more efficient in their allocation of storage units.
[03:54] <fuzzyhair> skyfalcon866: you don't have to
[03:54] <tck> skyfalcon866, the ext3 constantly defrags
[03:54] <tck> you dont need to do that
[03:54] <tck> actually ext2 did as well
[03:54] <Juliao> i think they werent working at all, the problem began when i installed ati driver (ubuntus default driver)
[03:54] <skyfalcon866> then why does fsck say 8% non contagous
[03:54] <Nutubuntu> t/y, Pici
[03:54] <sx66> does linux skype have video?
[03:54] <tritium> Juliao: have you look at your /var/log/Xorg.0.log for clues?
[03:55] <BASHBANG> no kopete does though
[03:55] <Jordan_U> skyfalcon866, How much free space do you have?
[03:55] <mjp29> hello.  new ubuntu user here.  need help with dial up modem driver to put on uncles ubuntu
[03:55] <Juliao> but it doesnt enter tritium, the boot doesnt end
[03:55] <hatter> does anyone know of a putty like program that is gnome compliant ?
[03:55] <skyfalcon866> 124.2Gb
[03:55] <sx66> !skype
[03:55] <ubotu> To install Skype on Ubuntu, see https://help.ubuntu.com/community/Skype - To record on Skype, check: https://wiki.ubuntu.com/SkypeRecordingHowto
[03:55] <Juliao> i cant even pass from the half of the load bar
[03:56] <tritium> Juliao: have you tried booting into single-user mode (rescue mode)?
[03:56] <Jordan_U> skyfalcon866, You can install the package "defrag" ( in synaptic or sudo apt-get install defrag ) but I am curious how you got fragmentation with so much free space
[03:56] <rcbaxter_>  subprocess post-installation script returned error exit status 127
[03:56] <Xenguy> hatter: just use a terminal like gnome-terminal I would say
[03:56] <tck> sx66, http://share.skype.com/sites/linux/
[03:56] <Juliao> sorry tritium, how can i boot into single-user mode?
[03:57] <Jordan_U> hatter, ssh ?
[03:57] <hatter> Xenguy, yeah, but the good thing about putty is the management of multiple servers
[03:57] <JoelR> hi, how do i do if i want that a module gets loaded when system boot up?
[03:57] <mjp29> private mssg me if you can help (p.s. haven't used irc in a while, does /mssg username private mssg?
[03:57] <TaJMoX> JULIANO - press escape before ubuntu loads - you get a grub menu
[03:57] <tritium> Juliao: from the grub menu, you select it
[03:57] <Jordan_U> mjp29, One "s" /msg username
[03:57] <TaJMoX> juliano - when in recovery mode to sudo nano /etc/X11/xorg.conf and edit your Driver, change it to ati or vesa
[03:57] <holotone> My new Dell Inspiron E1505 w/ Ubuntu pre-loaded has a very odd problem; It seems that every time I close the lid, the LCD turns off as it should. However, it does not turn back on, and the only way I can manage to get it back is a reboot - Fn + CRT/LCD doesn't work, nor does switching to a raw terminal and back (ctrl+alt+f1, etc..) Any suggestions?
[03:58] <Xenguy> hatter: management... IIUC I just use aliases
[03:58] <Juliao> hm...
[03:58] <Juliao> ill try to do that
[03:58] <JoelR> hi, how do i do if i want that a module gets loaded when system boot up?
[03:58] <Juliao> but tritium, and what about the DEBIAN and PACKAGE do not work?
[03:58] <holotone> A thorough search of google doesn't yeild much personal information
[03:58] <TaJMoX> joelr : /etc/modules
[03:58] <Jordan_U> TaJMoX, If that were the problem then he wouldn't be having an error during usplash though, he would get a warning that X failed to start
[03:58] <tck> sx66, http://www.skype.com/download/skype/linux/ nice updated package there for Feisty
[03:59] <Xenguy> hatter: for example, create aliases of the form 's-_', where '_' is the first letter of the hostname.  Works for me :-)
[03:59] <TaJMoX> jordan_u ok then turn off splash so he can see error
[03:59] <tck> Version 1.4.0.74 for Linux.
[03:59] <tck> June 14, 2007
[03:59] <skyfalcon866> oAnalyze finished. 9.0 % fragmentation (146 files), 73.4 average frags/MB
[03:59] <skyfalcon866> thats from jdongs defrag tool
[03:59] <TaJMoX> juliano - in grub menu press F6 and remove the text that says "splash" and "quiet"
[04:00] <Xenguy> hatter: the 's-' = 'ssh' of course
[04:00] <mjp29> thanks Jordan.  p.s. I have a For candidate modem in PCI bus:  03:09.0
[04:00] <mjp29>    Class 0780: 14f1:2702 Communication controller: Conexant Unknown device 2702
[04:00] <mjp29>       Primary PCI_id  14f1:2702
[04:00] <mjp29>  Support type needed or chipset:	hsfmodem  if anyone could please help
[04:00] <Juliao> tritium, its because i downloaded aMSN today, and its a package, but it doesnt work
[04:00] <Xenguy> hatter: depending on how many servers you are talking about
[04:01] <Kim^J> Hello, I'm looking for a dock that doesn't require Beryl/Compiz/3d-whatever. A taskbar but with only the icons.
[04:01] <Kim^J> Must work in Gnome.
[04:01] <trisha> anyone here knows how to activate fvwm95 x -window?
[04:01] <hatter> Xenguy, I manage over 20 servers, putty is nice and easy for tunnels and names
[04:01] <hatter> but in a putty window i cannot paste
[04:01] <hatter> like a gnome terrminal
[04:02] <hatter> i like the tabs in gnome terminal though
[04:02] <Jordan_U> mjp29, Make sure you read the warnings in "man defrag"
[04:02] <mortuis99>  is there a better IM package for UBUNTU than GAIM?
[04:02] <JoelR> how can i know if my 3D aceleration is active?
[04:02] <Kim^J> JoelR: glxgears
[04:02] <hatter> JoelR, glxgears
[04:02] <Jordan_U> JoelR, glxinfo | direct
[04:03] <hatter> mortuis99, what does gaim do that you dont like ?  i use gaim
[04:03] <trisha> anyone here knows how to activate fvwm95 x -window?
[04:03] <tritium> Jordan_U: you forgot grep ;)
[04:03] <mortuis99> i have problems with file transfers other than that it is GR8
[04:03] <Jordan_U> JoelR, glxinfo | grep direct
[04:04] <Nutubuntu> Jordan_U,  cycom, I essentially have followed the http://users.piuha.net/martti/comp/ubuntu/raid.html model. I am not using LVM, just setting up a RAID1. The two disks are different sizes, and I am planning to use the "extra" space on the larger one for /usr. I may put a couple of virtual machines there as well.
[04:04] <mjp29> can xchat gnome be set to make sound when my username is typed or I'm mssgd or chatted to
[04:04] <crdlb> mjp29, afaik no but regular xchat can
[04:04] <errorlevel> Can anybody help me upgrade to Feisty?  I've been trying for the past couple months to no avail.
[04:04] <holotone> My new Dell Inspiron E1505 w/ Ubuntu pre-loaded has a very odd problem; It seems that every time I close the lid, the LCD turns off as it should. However, it does not turn back on, and the only way I can manage to get it back is a reboot - Fn + CRT/LCD doesn't work, nor does switching to a raw terminal and back (ctrl+alt+f1, etc..) Any suggestions? An exhaustive Google search hasn't yielded any useful information. I have my 
[04:04] <Jordan_U> errorlevel, What have you tried?
[04:04] <Jordan_U> errorlevel, And what are you using now?
[04:05] <jjs2> holotone: are you running Beryl?
[04:05] <JoelR> Jordan_U, and how can i enable beryl?
[04:05] <crdlb> (or compiz)
[04:05] <mjp29> crdlb do I have afaik?  I just know I have xchat gnome
[04:05] <errorlevel> Jordan_U: Well, I've been trying to use the update manager, but every time I do, it says it can't download the release notes.  (I'm currently running Edgy.)
[04:05] <holotone> jjs2: yes
[04:05] <crdlb> mjp29, afaik is as far as I know :P
[04:05] <Nutubuntu> afaik = "as far as I know" mjp29
[04:05] <jjs2> holotone:  on mine, it does that when running Beryl, but not when just running metacity.  So I guess just switch to Metacity when closing your lid.
[04:06] <crdlb> mjp29, install xchat with synaptic
[04:06] <crdlb> !info xchat | mjp29
[04:06] <ubotu> mjp29: xchat: IRC client for X similar to AmIRC. In component universe, is optional. Version 2.8.0-0ubuntu4 (feisty), package size 295 kB, installed size 796 kB
[04:06] <jjs2> holotone:  this might have something to do with the nvidia drivers
[04:06] <gorbag01> hello tout le monde
[04:06] <crdlb> holotone, you got a nvidia card in it?
[04:06] <Julinho> hi
[04:06] <errorlevel> Jordan_U: If it matters, netstat shows a connection attempting to be made to prat.canonical.com.  But I can't ping it, or connect to it using firefox.
[04:06] <mjp29> !info xchat
[04:06] <ubotu> xchat: IRC client for X similar to AmIRC. In component universe, is optional. Version 2.8.0-0ubuntu4 (feisty), package size 295 kB, installed size 796 kB
[04:06] <Julinho> how can i enter to secure mode?
[04:06] <holotone> jjs2: I've got the intel 945m video card, which I believe may be nvidia based
[04:07] <crdlb> holotone, it's not, and that shouldn't be happening
[04:07] <holotone> crdlb: any suggestion on how to fix or troubleshoot the problem?
[04:07] <crdlb> holotone, you might want to try the experimental modesetting driver: xserver-xorg-video-intel
[04:07] <Jordan_U> errorlevel, Are you up to date on all your Edgy packages?
[04:07] <Julinho> !repeat
[04:07] <ubotu> Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. You can search https://help.ubuntu.com or http://wiki.ubuntu.com while you wait. Also see !patience
[04:07] <errorlevel> Jordan_U: Yep.
[04:08] <errorlevel> Jordan_U: And the error has been consistent since at least a week after Feisty was released.
[04:08] <Julinho> how can i enter to rescue mode?
[04:08] <Jordan_U> errorlevel, You could try doing a manual upgrade if you don't mind the possibility of some package breakage
[04:08] <holotone> crdlb: just sudo apt-get install xserver-xorg-video-intel ?
[04:08] <errorlevel> Jordan_U: Well, honestly that's what I was hoping to avoid by doing the GUI upgrade.
[04:08] <crdlb> holotone, you may have to change your xorg.conf too, I'm not sure
[04:09] <crdlb> I've never tried it
[04:09] <holotone> I'll give it a shot.
[04:09] <holotone> thanks!
[04:09] <errorlevel> Jordan_U: Is there a good place that lists common problems resulting from a manual upgrade?
[04:09] <crdlb> holotone, if apt-get removes the xserver-xorg-video-i810 driver, then there's nothing else to do
[04:09] <Julinho> how can i into rescue mode?
[04:09] <crdlb> because that's the driver you're using now
[04:10] <Xenguy> hatter: hahah, I just saw there is a client called... putty ! ;-)
[04:10] <skyfalcon866> is kde less intensive than gnome
[04:10] <dvs02> i need to repartition the drive i'm running the os from. theres just one large /. is there a way to do that via ssh without rebooting or reinstalling?
[04:10] <actualandrew> Julinho: boot from a cd and type "linux rescue"
[04:10] <dvs02> no, gnome is less intensive
[04:10] <Jordan_U> Julinho, Press escape when you boot and you will see a grub menu with a rescue mode option
[04:10] <Nutubuntu> Jordan_U,  cycom, I have read the links ... I've followed the http://users.piuha.net/martti/comp/ubuntu/raid.html model. I am not using LVM, just setting up a RAID1 on two new disks and installing Feisty. Or trying to ...
[04:10] <Julinho> Jordan, thank-you a lot
[04:11] <Xenguy> hatter: appears to be a port of the wind0ze app
[04:11] <Jordan_U> dvs02, No easy way that I can think of
[04:11] <Jordan_U> Julinho, np
[04:12] <navets> whats a .svg file?
[04:13] <tritium> navets: scalable vector graphics
[04:13] <navets> tritium: can I use it to creat a background for a webpage?
[04:13] <GigaClon> yeah
[04:13] <Jordan_U> navets, You can open and edit them with inkscape
[04:14] <errorlevel> Jordan_U: What is the name of the package or application that performs the GUI upgrade after the release notes are displayed?
[04:14] <Jordan_U> errorlevel, It's one application
[04:14] <navets> Jordan_U: i am using inkscape. Do I view them with konqueror or something else?
[04:14] <Jordan_U> navets, What are you trying to do with it?
[04:14] <errorlevel> Oh.  That sucks.
[04:15] <jfleming_> why am i getting "sshfs: Depends: libfuse2 but it is not installable" when i try to install the sshfs package
[04:15] <Jordan_U> errorlevel, I would try a manual upgrade, I'll grab the link with instructions...
[04:15] <jfleming_> i've googled a bit
[04:15] <navets> Jordan_U: im trying to create a background for a webpage. Im just starting to learn this so Im not to sure what im doing
[04:15] <Beta-guy> what is Microsoft doing with the linux distrobutions?
[04:15] <holotone> Whichever user just suggested that I install the new intel video driver to resolve the laptop LCD not turning back on after closing my lid problem - Thanks! It worked perfectly!!!
[04:16] <Nutubuntu> navets, some browsers support svg and others don't. you can check at http://tavmjong.free.fr/INKSCAPE/MANUAL/web/svg_tests.php (an Inkscape page ... that's the app you're using? which I found through Google just now).
[04:16] <Jordan_U> navets, I know that Firefox supports svg but I don't think that IE does so you may have to save it as a png :(
[04:16] <navets> Jordan_U: ok
[04:16] <navets> Jordan_U: gonna do some testing thanks
[04:17] <NemesisD> in tape drives does anyone know the difference between /dev/st0 and /dev/nst0?
[04:17] <tak> I installed server 7.04 x86 last nite and now I get wacky response times.. =(  eg, When I ping yahoo.com I get exactly 40ms and 50ms responses. Other hosts on the same network see ~150ms (and change) to yahoo.com. mtr sees similar results, but tracepath does not so, I'm asuming it's only related to ICMP.
[04:17] <tak> nemesisD -> nst doesn't rewind, I think
[04:18] <hatter> NemesisD, one is rewind
[04:18] <hatter> tak is correct
[04:18] <john_> need help with modem:  have chipset info.
[04:18] <Toma-> has anyone had a multifunction printer work for both printing and scanning on feisty? Seems the udev rules for it just do not allow it at all
[04:18] <Jordan_U> Toma-, My psc-750 works great :)
[04:19] <Toma-> Jordan_U: hang on.. thats the same as mine i think...
[04:19] <Toma-> "Epson PM-A750 flatbed scanner"
[04:19] <Toma-> its actually a Epson RX530
[04:20] <Jordan_U> Toma-, xsane doesn't work, or will it not print?
[04:20] <Nutubuntu> In the alternate install, which kernel should I choose?
[04:20] <Jordan_U> Nutubuntu, -generic
[04:20] <Toma-> Jordan_U: it prints fine, xsane is its usually buggy self
[04:21] <eternalswd> anyone know how to setup monotone to use a proxy?  I set it up at some point, but now I can no longer use that proxy so I need to disable it.
[04:21] <Justasking> Cock?
[04:21] <Nutubuntu> t/y Jordan_U ... tried -generic; it wouldn't install. IDK what's going wrong, and wanted to figure out if maybe I chose the "wrong" kernel ... guess not.
[04:21] <Toma-> Jordan_U: Let me tell you what ive done so far. xsane wouldnt identify the scanner at all as root or normal user. I specified its usb bus in the epson.conf file for sane, and I could then use it as root. I made a udev rule for it according to its usb bus address like all the other scanners and I could then see it as normal user.
[04:22] <Jordan_U> Nutubuntu, My guess would be that your problems have to do with your raid setup
[04:22] <Toma-> So now, im looking at how to get usblp0 to let me use that to allow printing AND scanning
[04:22] <TuxOtaku> !ubotu webdav
[04:22] <ubotu> Sorry, I don't know anything about webdav - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[04:22] <Nutubuntu> Jordan_U,  that's my thought too, but ... "It's *supposed* to work" ... ;P
[04:22] <shorto> can anyone tell a me good web page editor for ubuntu?
[04:23] <m1r> how can i rename folder full of *.JPG to *.jpg at once  ?
[04:23] <TuxOtaku> shorto, nVu.
[04:23] <mortuis99> shorto  bluefish
[04:23] <The_Jack_of_Club> is there a way to get my ralink rt2500 chipset wireless card to work without uninstalling networkmanager or permanently setting the ssid?
[04:23] <bobsumone> is there a way to run KDE and Gnome on one computer with 2 screens?
[04:23] <Nutubuntu> shorto,  if you're hand coding, try bluefish; for graphical try nVu or maybe OO.o
[04:23] <TuxOtaku> hey, I'm trying to set up a webdav share with apache on feisty....I'm completely lost....anyone here have any experience with WebDAV and wanna gimme a hand?
[04:23] <bobsumone> or a way to get the default KDE browser on Gnome?
[04:23] <hatter> bobsumone, you could use vmware
[04:24] <TuxOtaku> bobsumone, just apt-get install konqueror
[04:24] <alecwh> Helo! I'm having a strange problem, I'm running beryl, and whenever I try to resize my window, the window fills black. It's really odd, I can't describe it, so here is a screenshot:  http://img382.imageshack.us/my.php?image=screenshotlq2.png Does anyone know how to fix this problem?
[04:24] <shorto> can anyone tell a me good web page editor for ubuntu?
[04:24] <shorto> waa sorry for the repost
[04:24] <alecwh> shorto, gedit
[04:25] <hatter> shorto, nutubunto answered you
[04:25] <bobsumone> tux/hatter: thanks for the info
[04:25] <bobsumone> is there any known issues about using Beryl with 2 screens and Synergy from XP?
[04:25] <m1r> help needed with renaming JPG to jpg , about 100 pics in folder :/
[04:25] <hatter> bobsumone, i am not sure what your aim is,  but if you want 2 computers on one computer vmplayer works great
[04:26] <m1r> is there a comand which can rename like 100 pictures ?
[04:26] <The_Jack_of_Club> bobsumone, try sudo update-alternatives ?config x-www-browser
[04:26] <m1r> from *.JPG to *.jpg ?
[04:26] <alecwh> m1r, be more specific. write like 4 sentences...
[04:26] <bsund> alecwh: ati card?
[04:26] <alecwh> and stop reposted.
[04:27] <alecwh> no, bsund, I have nVidia.
[04:27] <alecwh> It just barely started happening.
[04:27] <m1r> alewh , sry m8 , i got like 100 pictures in *.JPG format, and i need them in *.jpg , is there a way to rename all at once ?
[04:27] <bsund> k i had some problems with me ati doing same thing.. changed when i switched to a cheap nvidia card hehe
[04:28] <navets> hey should I use gimp instead of inkscape?
[04:28] <alecwh> m1r, don't address me specifically. Read the guide (posted in the channel's topic) for a better understanding of how this work.
[04:28] <tritium> m1r: there is a package called mrename for that purpose.  You could also use a shell script
[04:28] <PurpZeY> Anyone have any idea why I might have a small window, serving no function, it is labeled, "NetworkManager" but, my network manager is functioning 100%.
[04:28] <Nutubuntu> navets, they do different things - depends what you're trying to accomplish
[04:29] <m1r> ok ty tritium, alecwh, sry again
[04:29] <navets> Nutubuntu: trying to make a background for a webpage.
[04:29] <alecwh> m1r, just read the rules. No need to apoligize.
[04:29] <amishjim> i think alec needs to change tampons
[04:29] <alliecat> :o
[04:29] <tritium> amishjim: that was uncalled for...
[04:29] <navets> my tampons bleed
[04:29] <navets> ... lol jp
[04:29] <alliecat> i kind of lolled idk
[04:29] <amishjim> so i taklkin down to people
[04:30] <eternalswd> mlr, you should be able to create a script:  ls | grep "\.JPG" | sed 's/\(.*\)\.JPG/mv\ \1\.JPG\ \1\.jpg/g > script
[04:30] <amishjim> not allie alec
[04:30] <alliecat> yeah but i laughed anyway
[04:30] <tritium> eternalswd: that's not too newbie friendly...perhaps he should try mrename
[04:30] <m1r> eternalswd , that is far out of my knowledge
[04:30] <bobsumone> hatter: my question aboiut Beryl is just wondering about issues, the KDE thing is mainly for getting all the web browsers so  can test my sites
[04:30] <alecwh> tritum, I agree. Loops and such are complicated for beginners.
[04:31] <m1r> :)
[04:31] <tritium> m1r: install and use mrename
[04:31] <m1r> yes i am on it
[04:32] <john_> leaving soon:  if msg me if you can help with driver i need for internal modem (i have chipset info)
[04:32] <Nutubuntu> navets, you might get a better answer on some of the web pages that come up in a google search on "inkscape vs gimp" (e.g., http://linuxplanet.com/linuxplanet/tutorials/5757/1/) GIMP is about raster graphics; Inkscape is about vector graphics; they support somewhat different file formats, etc.
[04:33] <alecwh> Hello! I'm having a strange problem, I'm running beryl, and whenever I try to resize my window, the window fills black. It's really odd, I can't describe it, so here is a screenshot:  http://img382.imageshack.us/my.php?image=screenshotlq2.png Does anyone know how to fix this problem?
[04:33] <eternalswd> mlr, even so, grep and sed are your friends, you might find it useful to learn how to use them ;)
[04:33] <navets> Nutubuntu: k thanks
[04:33] <skyfalcon866> how do i encrypt files
[04:34] <tritium> skyfalcon866: use gpg
[04:34] <NickGarvey> does the ubuntu live cd mount windows partitions as rw by default?
[04:34] <nomasteryoda> no
[04:34] <eXeCuT3> NickGarvey, nope
[04:34] <eXeCuT3> ntfs is read only
[04:34] <Nutubuntu> skyfalcon866,  gpg, or look into encfs if you want a dynamically-sized encrypted directory
[04:35] <PurpZeY> Anyone have any idea why I might have a tiny window, serving no function, it is labeled, "NetworkManager" but, my network manager is functioning 100%.
[04:36] <skyfalcon866> is gpg have a gui
[04:36] <NickGarvey> eXeCuT3: strange, I don't see it when I do "mount | grep -v rw | grep ro"
[04:36] <eXeCuT3> you can also create encrypted img file and mount it, if you want
[04:36] <Nutubuntu> skyfalcon866,  google says "yes" (e.g., KGpg, Seahorse...)
[04:36] <eXeCuT3> NickGarvey, I don't really understand that stuff, sorry
[04:36] <spooker> #quit
[04:36] <skyfalcon866> gpg
[04:36] <NickGarvey> eXeCuT3: oh alright, by the way there is ntfs writing support at this point, using methods such as fuse
[04:36] <eXeCuT3> good to know, thanks
[04:36] <nomasteryoda> !ntfs-3g > NickGarvey,
[04:36] <nomasteryoda> ya
[04:36] <NickGarvey> nomasteryoda: I do can use google
[04:37] <NickGarvey> too*
[04:37] <eXeCuT3> i deleted windows a year ago, so i don't really need it
[04:37] <nomasteryoda> k
[04:37] <eXeCuT3> but 10x anyway
[04:37] <nomasteryoda> lol
[04:37] <nomasteryoda> me too eXeCuT3
[04:37] <shorto> can anyone tell me why my mouse goes haywire and starts pressing everything openin windows pastng stuff etc?
[04:37] <NickGarvey> shorto: its broken
[04:38] <nomasteryoda> touchpad?
[04:38] <eXeCuT3> shorto, he is high
[04:38] <shorto> no a mx510 :D
[04:38] <eXeCuT3> tell him to stop with all that weed
[04:38] <shorto> it can't be broken works fine in windows and in debian
[04:38] <shorto> but in ubuntu it just goes crazy once a while
[04:39] <alecwh> I'm having a strange problem, I'm running beryl, and whenever I try to resize my window, the window fills black. It's really odd, I can't describe it, so here is a screenshot:  http://img382.imageshack.us/my.php?image=screenshotlq2.png Does anyone know how to fix this problem?
[04:39] <eXeCuT3> is that logitech mouse ?
[04:39] <shorto> yes
[04:40] <nomasteryoda> alecwh, did you upgrade beryl from a past install?
[04:40] <alecwh> I just installed it days ago, normasteryoda.
[04:40] <eXeCuT3> oh, n/m, it's touchpad
[04:40] <nomasteryoda> lol
[04:40] <alecwh> Honostly, it seemed to fix it self seconds ago. :)
[04:40] <eXeCuT3> i thought https://bugs.launchpad.net/ubuntu/+bug/37929 may help you
[04:40] <m1r> tritium, i installed it but how to use it :/
[04:41] <crdlb> !blackwindows-#ubuntu-effects | alecwh
[04:41] <ubotu> alecwh: This essentially happens when you run out of video memory. The only known workaround for this until it is fixed in the nVidia driver is to start beryl with --use-copy or "Copy Rendering" from beryl-manager.
[04:41] <nomasteryoda> alecwh, alecwh beryl is still very beta code, working and cool, but more toward the alpha side of beta
[04:41] <niuq> hi, i'm using gftp, and im not sure what are passives and non passives transfers
[04:41] <nomasteryoda> oh, nvm
[04:41] <zack> hey anyone help me out with kismet.source i got a orinco silver card
[04:41] <alecwh> so what's the command line for that?
[04:41] <bruenig> I have never had any problems with beryl
[04:42] <alecwh> and crblb, what is that command line; what does it do?
[04:42] <Nutubuntu> niuq,  http://slacksite.com/other/ftp.html ... google can be *your* friend too
[04:42] <crdlb> alecwh, right click on the beryl jewel, adv beryl options, rendering path, copy
[04:42] <nomasteryoda> well i have issue with nvidia on my main system... its 256mb video card, and worked fine without beryl... start playing bzflag and screen randomly goes black
[04:42] <nomasteryoda> sounds like same issue
[04:42] <crdlb> nomasteryoda, it is
[04:43] <nomasteryoda> hmmm, ok
[04:43] <Trixsey> Hey guys! I'm trying to follow a tutorial on enabling duplex sound in Feisty, but there is one step I can't follow! "1. Goto System->Preferences->Sound and disable "Enable Sound Server Startup", there is no such alternative under "Sound" :(
[04:43] <nomasteryoda> crdlb, cool and thanks... learned something else today
[04:43] <alecwh> crdlb, what did that do? things went weird for a few seconds, and now it's back to normal.
[04:43] <mike_> Whats the address for wine?
[04:43] <bsund> has there been any performance tests with games with and without beryl? :)
[04:44] <Perdente> mike: you can download it through the synaptic manager
[04:44] <bruenig> if you are gaming just kill beryl
[04:44] <crdlb> alecwh, it bypasses part of the nvidia driver, it's slower and less efficient but stops the black window bug
[04:44] <nj786> how do you install beryls?
[04:44] <Bock> \o/
[04:44] <Perdente> oh oh
[04:44] <bruenig> nj786, #ubuntu-effects
[04:44] <Perdente> through the synaptic manager
[04:44] <niuq> Nutubuntu: thanks, nice page
[04:44] <mike_> Whats the address for wine?
[04:44] <bruenig> mike_, sudo apt-get install wine
[04:44] <alecwh> so, it fixes the bug, but it makes things.... slower?
[04:44] <alecwh> It's never happened before, too.
[04:44] <Nutubuntu> mike_, it's in the repos, or check the winehq.com site for more info
[04:44] <alecwh> :(
[04:44] <Perdente> mike: put that in your terminal
[04:44] <Buck> after reinstalling windows on my dual boot, it removed the grub loader.. how do I best reinstate the grub loader?
[04:44] <mike_> no the irc adress
[04:44] <nomasteryoda> mike_, you can install using the package manager
[04:44] <bruenig> #winehq
[04:44] <mike_> tks
[04:45] <Nutubuntu> y/w niuq
[04:45] <eugman> Is it safe to install a program from source over an older version?
[04:45] <Perdente> nj786: go into synaptic manager and search for all the beryl packages, in particular get the beryl-manager
[04:45] <bruenig> eugman, remove the older one first
[04:45] <nivekc1> hey guys im trying to figure out how to use wine to install expression web from a disc
[04:45] <niuq> Nutubuntu: what does y/w stands for?
[04:45] <Nutubuntu> y/w = "you're welcome," niuq
[04:45] <bruenig> nivekc1, what is that
[04:45] <alecwh> nivekc1, I don't think that's possible in WINE.
[04:45] <eugman> buenig, it's not from synaptic, how do I do that?
[04:46] <niuq> Nutubuntu: ^^! hehe ok
[04:46] <alecwh> It's web software, it's like Frontpage 2.
[04:46] <nivekc1> expression web is an html editor for widows
[04:46] <bruenig> eugman, remove all the files that it installed
[04:46] <nivekc1> yea
[04:46] <alecwh> nivekc1, why doy ou want to install it?
[04:46] <Trixsey> How do I enable duplex sound in Feisty?
[04:46] <bruenig> eugman, get the source, recompile it with the same options and do sudo make uninstall instead of sudo make install
[04:46] <nivekc1> well i cant find anything similar for linux
[04:46] <niuq> html editor, i just like dreamweaver as web editor ^^
[04:46] <Nutubuntu> Is it possible to install Feisty to a set of partitions on one disk, and then *later* set up a RAID1 array? Everything I've read does the partitioning and md device creation before setting up fs and installing the OS.
[04:47] <logomancer> nivekc1, nvu?
[04:47] <nivekc1> i thought wine installed windows software
[04:47] <nj786> perdente, i searched for beryl-manager andi  only found 1
[04:47] <alecwh> there are many good ones, nivekc1, and I would suggest learning HTML/CSS without... cheating. ;)
[04:47] <niuq> texteditor would work ^^
[04:47] <nj786> perdente, how many more are there?
[04:47] <nomasteryoda> nivekc1, your alternatives are thus... install virtualbox, install windows into that and then your windows programs
[04:47] <niuq> nivekc1: it does install windows software
[04:47] <Nwallins|home> Nutubuntu: it should be possible.  may take some wizardry to be able to boot off it
[04:47] <nivekc1> well i dont use it often or i would learn but i just need to do something wuick
[04:47] <Perdente> there should be.. one sec
[04:47] <niuq> nivekc1: or kind of :P
[04:47] <nomasteryoda> nivekc1, or vmware
[04:48] <niuq> nivekc1: i actually use dreamweaver with linux
[04:48] <nivekc1> what is nvu
[04:48] <alecwh> nivekc1, it
[04:48] <nomasteryoda> nvu is good for something quick
[04:48] <nomasteryoda> i use it all the time though
[04:48] <Perdente> nj786, I have about 8
[04:48] <alecwh> nivekc1, it's not worth going through the trouble to use it on "occasion". Try something else, like, Bluefish.
[04:48] <flavioribeiro> hi, im having a problem with usb audio
[04:48] <nivekc1> i have blue fish but it requires code
[04:48] <nomasteryoda> nvu is closer to wysiwyg
[04:48] <Nutubuntu> Nwallins|home,  I suppose I'd have to duplicate & edit grub on the second disk, make sure it's bootable, etc. ... dunno what to do otherwise, though, the alternate install CD is letting me down
[04:48] <nomasteryoda> i..e. gui
[04:49] <alecwh> I don't use WYSIWYGs, so I can't be much help. :(
[04:49] <Perdente> nj786, here appearantly I added some software sources
[04:49] <nomasteryoda> nivekc1, sudo aptitude install nvu
[04:49] <Perdente> http://ubuntu.beryl-project.org/
[04:49] <Perdente> http://ubuntu.beryl-project.org
[04:49] <flavioribeiro> in system preferences sound i choosed USB Audio and test.. everything was ok, the beep rings.. but when i go to Sounds session and try Play log in sound, it doesnt ring.
[04:49] <nj786> perdente, but i cannot find anymore i only searched for beryl-manager is there a sepcific search to find beryl?
[04:49] <logomancer> Can someone help me out when a wireless problem when they're free?
[04:50] <niuq> why are to many problems with ati cards?
[04:50] <rich__> ! paste
[04:50] <ubotu> pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic)
[04:50] <bruenig> @someone | logomancer
[04:50] <bruenig> !someone | logomancer
[04:50] <ubotu> logomancer: A large amount of the first questions asked in this channel start with "Does anyone/anybody..."  Why not ask your next question (the real one) and find out?
[04:50] <nivekc1> it didnt find nvu
[04:50] <Perdente> nj786, here this will fix everything, go into settings, repositories
[04:50] <notgod> ok, I installed ubuntu in safe mode, because I was getting a corrupted screen. Now I installed the nvidia driver, and I want to get a resolution higher than 1024x768. :) is there a tool, or should I hack xorg.conf ?
[04:50] <minerale> Hi, can someone give me that link where I can get restricted codecs ?
[04:50] <logomancer> Alright then.
[04:50] <Perdente> nj786 then go to the third party tab
[04:50] <Driven10> notgod sudo dpkg-reconfigure xserver-xorg
[04:50] <alecwh> notgod, in the terminal, type "sudo nvidia-settings"
[04:50] <logomancer> (sorry, I've not been here in a while)
[04:51] <alecwh> My way is much better, and easier. :)
[04:51] <fuffalo-> how do i make my computer not prompt me for a keyring password everytime i boot up?
[04:51] <Driven10> heh yeah :(
[04:51] <notgod> alecwh: thanks!
[04:51] <alecwh> in your face Driven. >_>
[04:51] <nj786> perdente, okay and
[04:51] <PurpZeY> fuffalo-: Keyring is related to your network manager most likely.
[04:51] <alecwh> no problem
[04:51] <alecwh> notgod
[04:51] <Driven10> I'm pretty new to it myself, I was proud I had any answer
[04:51] <Perdente> nj786, and then add http://ubuntu.beryl-project.org/ and http://ubuntu.beryl-project.org and distribution fiesty and components main
[04:51] <alecwh> MAKE SURE you click "save to xorg.inf (or whatever) after you make your settings
[04:51] <alecwh> or else it will revert next time you boot.
[04:51] <logomancer> So. I can't access my home network over wireless. It looks like the card associating with the AP, but I'm not getting an IP address.
[04:51] <Kim^J> Yo, is there a dock or taskbar that I can use in Gnome that doesn't need ANY form of 3D-stuff. Much like the dock in OpenSTEP.
[04:51] <nomasteryoda> PurpZeY, the old way kde set the keyring... set it and forget about asking  was the better way
[04:52] <bruenig> Kim^J, xfce has a dock, and it is superior to gnome anyways
[04:52] <Perdente> nj786, distribution fiesty and components main are just some of the details, you will see distribution and components below where you enter the address
[04:52] <flavioribeiro> minerale, http://www.lednerd.com/2007/06/14/como-instalar-populares-formatos-multimidia-no-ubuntu/
[04:52] <Kim^J> bruenig: Name?
[04:52] <nomasteryoda> logomancer, so is the ESSID unique?
[04:52] <skyfalcon866> is ext3 better than reserffs
[04:52] <logomancer> nomasteryoda, it is.
[04:52] <bruenig> Kim^J, xubuntu-desktop
[04:52] <Kim^J> bruenig: Ubuntu package name, and can I use it in Gnome.
[04:53] <Kim^J> bruenig: GTFO.
[04:53] <nomasteryoda> logomancer, and using ubuntu vs kubuntu?
[04:53] <logomancer> nomasteryoda,
[04:53] <Kim^J> bruenig: That's not the answer I want idiot.
[04:53] <Perdente> kubuntu is kde based
[04:53] <logomancer> nomasteryoda, ubuntu
[04:53] <Nutubuntu> skyfalcon866,  I hate to say this, but "It depends." Better for what purpose ... ?
[04:53] <flavioribeiro> minerale,  its portuguese but since the tutorial have photos, i guess you will not have problems
[04:53] <nomasteryoda> ok, did you try to manually set the network stuff or use the network-manager?
[04:53] <Perdente> I wish I really knew what that meant, something about a different setup
[04:53] <bruenig> Kim^J, that is the name, maybe xfce4
[04:53] <logomancer> network-manager keeps asking me over and over again for a WEP key -- which I provide -- it looks like it associates -- and then it asks me again after about one minute
[04:53] <bruenig> !info xfce4
[04:53] <skyfalcon866> for general purpose
[04:53] <Frogzoo> logomancer: unless you have l33t requirements go ext3 every time
[04:53] <ubotu> xfce4: meta-package for xfce4 dependencies. In component universe, is optional. Version 4.3.99.1 (feisty), package size 4 kB, installed size 48 kB
[04:53] <nomasteryoda> ah
[04:53] <bruenig> Kim^J, right, sudo apt-get install xfce4 will work too
[04:53] <logomancer> nomasteryoda, network-manager
[04:53] <Kim^J> bruenig: You know nothing. Don't anser.
[04:53] <nomasteryoda> logomancer, what card?
[04:54] <logomancer> Intel 3945.
[04:55] <Frogzoo> skyfalcon866: unless you have l33t requirements go ext3 every time
[04:55] <nomasteryoda> ok
[04:55] <bruenig> Kim^J, your using ubuntu and can't find a dock yet I know nothing?
[04:55] <Kim^J> bruenig: I already have Gnome, I'm not interested in installing Xfce.
[04:55] <nj786> perdente it will not let me add the adress
[04:55] <Kim^J> bruenig: Yes. I don't know which dock to use. I normally use wmii.
[04:55] <bruenig> Kim^J, I was just giving you an option, obviously you are weak on hardware specs and xfce is better than gnome on any specs and it has a dock
[04:55] <Frogzoo> !patience | Kim^J
[04:55] <ubotu> Kim^J: The people here are volunteers, your attitude may determine how fast you are helped.  Not everyone is available all the time, likewise not every answer is available instantly. See also http://wiki.ubuntu.com/IrcGuidelines
[04:55] <Perdente> which one?
[04:55] <Nutubuntu> skyfalcon866,  what Frogzoo said. ext3 has been around for a long time and is very stable
[04:55] <Perdente> either?
[04:55] <Fenix-Dark> hey
[04:55] <logomancer> It might be an issue with dhcdbd, because I find: "dhcdbd: Unrequested down ?:3" in .var.log/messages
[04:55] <Fenix-Dark> i'd like to install ubuntu, but keep my ntfs partition
[04:55] <Nwallins|home> Nutubuntu: http://en.wikipedia.org/wiki/Mdadm
[04:55] <logomancer> /var/log/messages, that is...
[04:55] <notgod> alecwh: is that in the menu somewhere as well?
[04:55] <Kim^J> bruenig: I'm not weak on hardware. I'm not just interested in Beryl/Compiz/Whatever because it's UGLY, just getting in the way and I hate it.
[04:55] <alecwh> notgod, sorry?
[04:55] <nomasteryoda> logomancer, might try the driver from here?? http://intellinuxwireless.org/
[04:55] <alecwh> What was I helping you on? XD
[04:55] <Nutubuntu> Nwallins|home,  I'll check it out, def. t/y!
[04:55] <bruenig> Kim^J, you are using gnome yet complaining about ugly? odd
[04:56] <bruenig> never thought of that
[04:56] <notgod> alecwh: nvidia-settings
[04:56] <alecwh> notgod, oh. what are you looking for?
[04:56] <flavioribeiro> hi, in system > preferences > sound i put USB Audio and test.. everything was ok, the beep rings.. but when i go to Sounds session and try Play log in sound, it doesnt ring. Playing musics into Totem, i saw that only totem's sound control works, the system sound control at start bar doesnt work.. any help?
[04:56] <nj786> perdente?
[04:56] <notgod> alecwh: if that is in the system menu anywhere, or only on the console?
[04:56] <Perdente> yeah, did either work?
[04:57] <skyfalcon866> when is ext4 going to be able to be used
[04:57] <nj786> perdente, i am copying and pasting them but it will not let me add it
[04:57] <Perdente> huh ok
[04:57] <alecwh> notgod, I think you can only access it in the console. I've never really cared about having it in the GUI... You won't use it often, it's not worth putting it in your System menu.
[04:57] <nj786> no idea why
[04:57] <Perdente> here we go
[04:57] <balthier> i just installed kubuntu, and using a serial dial up modem, and my ping or my browser works, is there something need configuring for my internet connection or something???????
[04:57] <Perdente> hey guys, whats the file that controls the synaptic manager distribution lists again?
[04:57] <Kim^J> bruenig: OMG, stop bitching about Gnome being ugly. I don't normally use Gnome, I use wmii and once in a while do use Gnome and I want it to be a pleasent feeling. A dock or taskbar with only icons and not the friggin text is what I like. I know Xfce4 has one like that but I don't what the name is and I didn't find it on the Xfce4 page.
[04:57] <balthier> i mean my browser and ping dosnt work
[04:57] <Nwallins|home> Nutubuntu: there has got to be better documentation out there -- search for a tutorial.  I haven't used it, but I've heard nothing but good things
[04:57] <Perdente> hey guys, whats the file that controls the synaptic manager distribution lists again?
[04:57] <Perdente> hey guys, whats the file that controls the synaptic manager distribution lists again?
[04:57] <Nutubuntu> Perdente,  do you mean sources.list?
[04:57] <alecwh> !patience Kim^] 
[04:57] <ubotu> Sorry, I don't know anything about patience kim^]  - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[04:58] <Perdente> lol thanks
[04:58] <fuffalo-> how do i make my computer not prompt me for a keyring password everytime i boot up?
[04:58] <bruenig> Kim^J, it is called xfce4-panel, the option is built into that
[04:58] <Kim^J> alecwh: WTF are you talking about.
[04:58] <Nutubuntu> Nwallins|home,  t/y :)
[04:58] <Kim^J> bruenig: Thank you.
[04:58] <Nutubuntu> !wtf
[04:58] <ubotu> Please watch your language and keep this channel family friendly.
[04:58] <Perdente> and what folder is it under?
[04:58] <bruenig> Kim^J, but you aren't going to be able to roll with gnome panel and xfce panel at the same time
[04:58] <bruenig> I wouldn't think at least
[04:58] <m1r> i installed mrename but it just seting prefix to file, can it make change extension ?=
[04:58] <Kim^J> Nope, only xfce4-panel then-.
[04:59] <nj786> perdente?
[04:59] <Perdente> nj786, yeah
[04:59] <Perdente> nj786, sorry was gathering info, ok, in the terminal type sudo...
[04:59] <Perdente> one sec
[04:59] <nj786> perdente, i am copying and pasting the links you gave me in add but it will not let me add it
[04:59] <minerale> can someone recommend a good IM client for the command lite?
[04:59] <Nutubuntu> bbl - be well, all :)
[04:59] <nj786> perdente, listening......
[04:59] <minerale> lite/line*
[05:00] <Flannel> minerale: centericq
[05:00] <Dr_willis> minerale,  what network? May want to check thge sourceforge web site. or freshmeat.net
[05:00] <Perdente> nj786, how do you send a private message like that anyway, I'll do that so it sticks out
[05:00] <Perdente> *what I type
[05:00] <minerale> dr_willis: aim
[05:00] <nj786> perdente, private message?
[05:00] <Flannel> minerale: centericq
[05:01] <nj786> perdente, let me private message you
[05:01] <Perdente> ok
[05:01] <jjs2> does anyone know how to run arbitrary commands in response to ACPI events?   I tried putting a couple lines in /etc/acpi/lid.sh to run gaim-remote commands from each user running X (to set gaim to "Away" when I close the lid), but it didn't do the trick. (The same command from the command line works)
[05:01] <m1r> i need to change more then 100 pictures from *.JPG to *.jpg , anyone got tip for it, i installed mrename but it just setting prefix :(
[05:01] <nj786> perdente, ok i pm u
[05:01] <Flannel> jjs2: I'd check into acpid, which is the daemon that handles stuff in response to acpi events
[05:01] <jjs2> ah!
[05:01] <jjs2> Thanks, Flannel! :)
[05:02] <scoobydoo28139> Any new support for the dell photo 944 printer yet?
[05:02] <Perdente> haha it blocked it because: Private messages from unregistered users are currently blocked due to spam
[05:02] <notgod> m1r: for x in *.JPG; mv $x `echo $x | sed 's/JPG$/jpg/'`
[05:02] <notgod> m1r: assuming they don't have spaces in them :)
[05:03] <nj786> perdente, o kcan you make a chat?
[05:03] <nj786> ok*
[05:03] <dudaz> lets say i have a shared drive on a windows machine(in the network), how do i access it frm Ubuntu.. i read somewhere i must use samba or sumtin... so how to search this in google
[05:03] <dardack> tovella: thanks for the help earlier, i had to do a fresh install to get ndiswrapper to work, but i have better signal str, and so far no drops, but we'll see as time goes on
[05:03] <Perdente> I can try
[05:03] <nj786> ok
[05:03] <m1r> notgod, how to use that  ?
[05:04] <m1r> just type in console ?
[05:04] <notgod> m1r: yes, sorry, slight correction: for x in *.JPG; do mv $x `echo $x | sed 's/JPG$/jpg/'`; done
[05:04] <nj786> perdente, any luck lol?
[05:04] <dardack> !samba
[05:04] <ubotu> samba is is the way to cooperate with Windows environments. Links with more info: https://wiki.ubuntu.com/MountWindowsSharesPermanently and http://help.ubuntu.com/ubuntu/serverguide/C/windows-networking.html - Samba can be administered via the web with SWAT
[05:05] <Perdente> nj786, no, but how do you do the messages you are doing right now?
[05:05] <nj786> perdente, what do you mean?
[05:05] <dudaz> thanks ubotu
[05:05] <dardack> he's a bot
[05:05] <alliecat> haha
[05:05] <alliecat> thankin the bot
[05:05] <bruenig> !thanks | dudaz
[05:05] <ubotu> dudaz: You're welcome! But keep in mind I'm just a bot ;-)
[05:05] <scoobydoo28139> where do i get a list of printers from dell thats compadable?
[05:06] <m1r> notgod, nothing hapens but >
[05:06] <dardack> i just gave him the command for samba for u
[05:06] <bruenig> scoobydoo28139, are you looking to buy a printer or just looking to see if yours is compatible?
[05:06] <niuq> lol i used to thanks the ubotu all the time ^^
[05:06] <notgod> m1r: ls
[05:06] <TaJMoX> <3 ubotu
[05:06] <scoobydoo28139> looking for compadability
[05:06] <Perdente> when you send me a message, it highlights your name and shakes my screen
[05:06] <scoobydoo28139> may new software i could try
[05:06] <dudaz> then thanks to dardack for summoning the bot... :)
[05:06] <bruenig> scoobydoo28139, I would just google for your printer and put linux after it
[05:06] <nj786> perdente, i have no idea
[05:06] <nj786> lol
[05:07] <TaJMoX> scoobydoo28139 : maybe this word will help your searches:  "Compatibility"
[05:07] <TaJMoX> Also try "Compatible"
[05:07] <m1r> notgod , noting hapens :/
[05:07] <bruenig> just "printer name linux"
[05:07] <nj786> perdente, lets just talk about beryl through here.....tell me what to type i nsudo
[05:07] <bruenig> that is all that shold be needed
[05:07] <flavioribeiro> how can i see ubotu quotes?
[05:07] <shiester_miester> hey everyone
[05:07] <TaJMoX> !ubotu
[05:07] <ubotu> I am ubotu, all-knowing infobot. You can browse my brain at http://bots.ubuntulinux.nl - Usage info: http://wiki.ubuntu.com/UbuntuBots
[05:08] <Perdente> ok, I actually was using this (in addition to it be true though) to find the sources.list file
[05:08] <firman> hiiiii
[05:08] <TaJMoX> hi
[05:08] <Perdente> if you add the directory there, it won't nix it
[05:08] <firman> hytjfg
[05:08] <UAEmirates> hello guys
[05:08] <firman> ytjyjhndyu
[05:08] <firman> hjmuyknytkui
[05:08] <firman> khjkytju
[05:08] <firman> cantik
[05:08] <firman> ggfgfgh
[05:08] <TaJMoX> firman : the answer is, install Windows
[05:08] <dudaz> someone ban firman...
[05:08] <nj786> perdente, ok i am ready when you are
[05:08] <jrib> firman: do you have a question about ubuntu support?
[05:08] <Perdente> ok one sec
[05:08] <m1r> is it posible that is so hard to change extension of files :)
[05:09] <letronje> hi most of the times when i restart my ubuntu, gnome-panel is not visible
[05:09] <Perdente> ok
[05:09] <UAEmirates> guys i need help , im trying to get some rar files and i couldnt find program to unrar them
[05:09] <shiester_miester> i am having a problem with booting ubuntu.  when it loads it hangs for ages and eventually exits to a shell and says that "sh" cant access "tty", i looked around on the web and found a few potential solutions but none have worked
[05:10] <Perdente> nj786: in your terminal type sudo gedit /etc/apt/sources.list
[05:10] <kravlin> hey. my friend switched over to ubuntu but he's having problems with his graphics card. its anvidia FX 5500 and whenever he loads the drivers it always screws up xwindows to the point of no return. Any ideas?
[05:10] <tonyyarusso> !nvu > nomasteryoda
[05:10] <nj786> perdente, o knext
[05:10] <nj786> ok next*
[05:10] <scoobydoo28139> TaJMoX: oh god i don't know how we would have gotten bye without your spelling correction.Thank you ever so much
[05:10] <Perdente> ok now at the bottom paste:
[05:10] <TaJMoX> scoobydoo28139 any time =] 
[05:10] <Perdente> #Beryl stuff
[05:10] <Perdente> deb http://ubuntu.beryl-project.org/ feisty main
[05:10] <Perdente> deb-src http://ubuntu.beryl-project.org feisty main
[05:10] <scoobydoo28139> :)
[05:11] <pilgrim> hi all. there is some netowrk activity that cannot be explained. I'm not downloading anything but system monitor is showing network activity. Anyone know why could this be?
[05:11] <nj786> perdente, ok
[05:11] <Perdente> ok then save and quit
[05:11] <livecd> I tried to install Ubuntu for a friend and it didn't work... now their computer won't boot
[05:11] <m1r> how to change extension from *.JPG to *.jpg on more then 100 files in one folder ?
[05:11] <nj786> perdente, now what?
[05:11] <pilgrim> m1r, rename
[05:12] <pilgrim> is the command
[05:12] <Perdente> nj786, and then go back to synaptic manager and see if you can find more packages?
[05:12] <livecd> I tried to reinstall and it rejects the CD ... what should I do?
[05:12] <m1r> for all 100 pilgrim ?
[05:12] <nj786> perdente, do i still type those url links?
[05:12] <Ambientmstr> If anyone can, I need help setting up my wi-fi card for use with wlan and such. Working with Edgy here. Any assistance would be appreciated.
[05:12] <nj786> in synap
[05:12] <jrib> m1r: rename -n 's/\.JPG$/.jpg/' *.JPG        remove the -n if it looks ok
[05:12] <pilgrim> m1r, yeah. it's a mass renaming program
[05:12] <Perdente> hmm, oh no that adds it
[05:12] <pilgrim> m1r, command line
[05:12] <Perdente> that is the sources list for synaptic
[05:12] <mikere> pilgrim: you could use etherape and/or wireshark to get more information on the network traffic
[05:12] <nj786> perdente, yes add it do i?
[05:12] <Perdente> no
[05:12] <livecd> errr, it crashes when I try to reinstall
[05:12] <nj786> ok
[05:12] <m1r> tnx guys i try
[05:12] <trisha> how do i create shortcut on my desktop running fvwm?
[05:12] <nj786> perdente, so search for beryl-manager?
[05:13] <pilgrim> mikere, hmm...somehow it stopped now!
[05:13] <livecd> I don't want to tell them tomorrow morning that I hozed their computer, what do I do?
[05:13] <pilgrim> mikere, kind of scary
[05:13] <Perdente> nj786, well, actually search for beryl
[05:13] <mikere> pilgrim: it musta known you were on to it =)
[05:13] <bruenig> trisha, write a .desktop file where Exec=fvwm
[05:13] <kravlin> Ambientmstr. To fix the wlan problem we dropped the network Manager and tried a program called wicd. its avalible at wicd.sourceforge.com
[05:13] <m1r> oh yea jrib tnx m8 :)
[05:13] <notgod> m1r: wow, ok, you can try rename 's/.JPG$/.jpg/' *.JPG
[05:13] <ruks> i am new to linux,am running ubuntu feisty fawn installed frostwire but it says i need to update jre to 1.5.0 i cant find it in synaptics how do i update it?
[05:13] <Ambientmstr> Ah
[05:13] <Ambientmstr> I'll check it out, thanks.
[05:13] <livecd> I tried to install Ubuntu for a friend and it didn't work... now their computer won't boot
[05:13] <cycom> ruks: look for sun-java
[05:13] <notgod> m1r: errr, 's/\.JPG$/.jpg/' *.JPG
[05:13] <livecd> I don't want to tell them tomorrow morning that I hozed their computer, what do I do?
[05:13] <m1r> is fixed , tnx guys :)
[05:13] <Music_Shuffle> Ambientmstr, ./win :)
[05:13] <trisha> bruenig: how do i do that?
[05:13] <bruenig> ruks, sun-java5-jre or sun-java6-jre
[05:13] <byonix> hi, i try to install installjammer to my system, but it says that no application to handle it
[05:13] <Perdente> nj786, get beryl, beryl-core, beryl-dev, and then get some beryl plugins
[05:13] <nj786> perdente, now do i install every beryl that is listed?
[05:13] <m1r> 137 files renamed
[05:14] <shiester_miester> livecd, how does it not boot?
[05:14] <trisha> bruenig: whats Exec=?
[05:14] <mikere> livecd: fdisk /r if you want to recover windows (using a windows boot disc)
[05:14] <kravlin> hey. my friend switched over to ubuntu but he's having problems with his graphics card. its anvidia FX 5500 and whenever he loads the drivers it always screws up xwindows to the point of no return. Any ideas?
[05:14] <bruenig> trisha, a parameter in .desktop files
[05:14] <shiester_miester> kravlin, how does it screw it up?
[05:14] <shiester_miester> does it return any error messages?
[05:14] <m1r> oh damn
[05:14] <bsund> using feisty with wine from reps.. i cant get fullscreen to work correctly.. it changes resolution but just crams a window between gnome panels? anyone know how to fix this?
[05:14] <nj786> perdente, so  basically mark every berly i see?
[05:14] <livecd> shiester_miester: it says error loading operating system, I assume that's a grub problem
[05:14] <Perdente> nj786, click the top beryl file and then hold down shift and click the bottom one and then right click and select ...
[05:15] <ruks> ok thanks found it
[05:15] <notgod> kravlin: can you be more clear about what "screws up xwindows" means?
[05:15] <shiester_miester> livecd, at what point does the error occur? does the grub menu come up?
[05:15] <kravlin> it stretches out the screen to the point where its unusable but it only boots into a text based interface.
[05:15] <vicente_neto> #ubuntu-br
[05:15] <Pie-rat1> is there any way to optimize game load times? I know WoW can load faster, i've seen it load a lot faster on the same hard drive, with NTFS in windows.
[05:15] <Perdente> nj786, get beryl, beryl-core, beryl-dev, and then get some beryl plugins
[05:15] <Talaman72> is there a wine channel on here?
[05:15] <livecd> shiester_miester: no grub menu... I don't think
[05:15] <notgod> kravlin: are you using the binary driver?
[05:15] <shiester_miester> kravlin, take a look at the xorg.conf file and check if the display modes are correct
[05:15] <Ambientmstr> /w music_shuffle Heheh
[05:15] <pilgrim> mikere, ok. now I'm paranoid. any good intrusion detection tool that's easy to use?
[05:16] <seaspray> Hi all
[05:16] <shiester_miester> livecd, does it even say "loading GRUB" or anything like that?
[05:16] <kravlin> hold on. I'm walking him through getting on irc so he can work with you guys
[05:16] <notgod> kravlin: System->administration->restricted drivers manager ?
[05:16] <nomasteryoda> oh, tonyyarusso thanks
[05:16] <nomasteryoda> did not know that
[05:16] <livecd> shiester_miester: I don't think it did... I'm on the liveCD now so it would take a while to verify, but I'm pretty sure that it didn't
[05:16] <nj786> perdente should i aslo get beryl-plugins unsupported
[05:16] <m1r> in console files were renamed to *.jpg , but in file browser still same *.JPG
[05:17] <kravlin> he is running off the onboard video right now.
[05:17] <Perdente> nj786, play it safe, but some of them have some of the coolest features
[05:17] <bruenig> m1r, reload the file browser
[05:17] <kravlin> its when he plugs in the card that things get funny
[05:17] <m1r> ok
[05:17] <nj786> perdente, play it safe?
[05:17] <shiester_miester> livecd, is it booting from the right hard drive
[05:17] <niuq> mlr: CTR='1' ; for PIC in *; do mv $PIC pic${CTR}.jpg && let "CTR++" ; done
[05:17] <nj786> perdente i am askin should i lol  beryl-plugins unsupported?
[05:17] <Quaenorde> Someone should update the Feisty 7.04 Helpfile to reflect the changes regarding ndiswrapper. 7.04 does NOT include ndiswrapper, but it says it is, and that you can install it with 'sudo apt-get install ndiswrapper-common', which returns an error of 'Couldn't find package ndiswrapper-common.'
[05:17] <kravlin> sounds like he just gave up.
[05:17] <Perdente> lol its fine
[05:17] <suxie> hello,every
[05:17] <shiester_miester> kravlin, what was he using to install the drivers?
[05:17] <kravlin> he's gonna go back to windows.
[05:17] <niuq> mlr: just get in the director where your pictures are, and run it
[05:17] <Perdente> I installed all of them so they can't be broken
[05:17] <livecd> shiester_miester: I think there's only one hard-drive
[05:18] <Perdente> I installed all of them so they can't be broken
[05:18] <kravlin> we tried it through a few methods on the internet.
[05:18] <shiester_miester> kravlin, did you try envy?
[05:18] <nj786> perdente, so  u installed every beryl that was listed on synaptic
[05:18] <kravlin> and we couldn't find the drivers anywere else.
[05:18] <shiester_miester> envy has always worked for me on a variety of cards
[05:18] <kravlin> envy?
[05:18] <seaspray> Hi guys - I have a problem....  loaded ubuntu live - no probs. after installing it - i am getting a loading X server error - any ideas
[05:18] <shiester_miester> seaspray, whats the error?
[05:18] <m1r> nothing
[05:18] <nj786> perdente, for example beryl-ubuntu?
[05:18] <Perdente> yeah, its not that big
[05:19] <Perdente> oh definitely
[05:19] <shiester_miester> kravlin, google "envy" its a python script that automatically installs nvidia drivers
[05:19] <Jordan_U> kravlin, You should try wiki.ubuntu.com before anything else, and for GFX use restricted driver manager
[05:19] <Perdente> but to start, get beryl manager and beryl-dev, beryl-ubuntu and then see if it works
[05:19] <kravlin> got it.
[05:19] <trisha> bruenig: sorry but i still dont get it.. can u explain further?
[05:19] <kravlin> thanks
[05:19] <seaspray> give me a sec shiester_miester
[05:19] <Perdente> you have to go to system, desktop effects and turn them on
[05:19] <Jordan_U> kravlin, Following multiple tutorials for the same thing can cause problems
[05:19] <kravlin> we reloaded the computer after each one.
[05:19] <Perdente> and then go to apps, system tools, beryl manager and click it
[05:19] <livecd> shiester_miester: so assuming it's booting from the right hard-drive, and that it doesn't get to GRUB, what kind of problem am I looking at here??
[05:19] <niuq> mlr: didnt work?
[05:19] <shiester_miester> livecd, i have no idea...i assume you partitioned it properly and installed correctly?
[05:19] <nj786> perdente, and what about beryl-kubuntu
[05:20] <Perdente> you don't want that
[05:20] <Quaenorde> Does anyone know if 6.10 still has a torrent file for the desktop CD?
[05:20] <shiester_miester> livecd, can you explain how you partitioned it
[05:20] <bruenig> trisha, I cannot unfortunately
[05:20] <rich__> nj786,  u from new jersey/
[05:20] <rich__> ?
[05:20] <kravlin> He switched back to windows apperently.
[05:20] <Jordan_U> kravlin, By reloaded you mean re-installed?
[05:20] <kravlin> yeah.
[05:20] <kravlin> sorry.
[05:20] <songwind> evening
[05:20] <trisha> bruenig: how do i put shortcut icon on my desktop running fvwm
[05:20] <nj786> rich_, no sir TEXAS
[05:20] <Jordan_U> kravlin, Did you try System -> Administration -> Restricted Driver Manager ?
[05:20] <livecd> shiester_miester: I used the automatic option,  let it split the disk in half as it does by default and then let it run
[05:21] <nj786> my name is N.J.
[05:21] <songwind> I was wondering if anyone knows of a patch for alsa 1.0.14 to get jack sense working with Realtek ALC861-VD codecs and snd-hda-intel?
[05:21] <bruenig> trisha, the fool proof way to do it is to put a .desktop, look in /usr/share/applications to get some idea of what that should be
[05:21] <inf3rnal2> problems with ad-hoc and latest stable release....anybody have some experience in ths area?
[05:21] <kravlin> Jordan_U. We would have. We couldn't boot into a graphical interface with the card in.
[05:21] <crimsun> songwind: you need to link us to the patch you used.
[05:21] <livecd> shiester_miester: Then I tried again, to repartition that half and the liveCD just borked
[05:21] <nj786> rich_ i get that alot lol
[05:21] <songwind> crimsun:  I haven't used any patch so far.
[05:21] <Jordan_U> kravlin, Ahh, ok
[05:21] <kravlin> its ok. he has a really really old computer which is a total POS. he said he will set up ubuntu when he gets a new one later on.
[05:21] <shiester_miester> livecd, i have no idea how the automatic partitioner works, but if there was a partition on it before it may have just killed it.  try reinstalling ubuntu and partitioning it manually?
[05:22] <cute_bettong> is there any software that will allow me to communicate and tinker with my motorla razer V3m in ubuntu?
[05:22] <crimsun> songwind: ok, then give me the url generated by that script.
[05:22] <songwind> crimsun:  I was trying to explain, all the links I found were for RC versions, not the relase version, so I haven't patched at all
[05:22] <shiester_miester> its pretty easy, you just create an ext3 partition at the beginning of free space and then a swap partition that is roughly 2x your ram
[05:22] <kravlin> it makes sense. most of the support is for newer equipment. he doesn't have anything but PCI Slots.
[05:23] <m1r> nothing hapened on browser, but on console all files were renamed
[05:23] <livecd> shiester_miester: I can try it again... if it fails again I'll just come back here.... actually.. since I'm at their house in Worcester on vacation... is there a loCo team for Massachussettes?
[05:23] <Jordan_U> kravlin, The solution for that is to use the VESA driver, it should work with any card by running: "sudo dpkg-reconfigure xserver-xorg -phigh" and choosing "vesa" when asked
[05:23] <seaspray> shiester_miester: Failed to start the X server(your graphical interface). It is likely that it i not set up correctly.
[05:23] <Dr_willis> swap of 2x ram is overkill for most things  thesed days.
[05:23] <kravlin> we tried that as well.
[05:23] <m1r> this is really strange
[05:23] <lmosher> Anyone know of a way to make gmail work with e-mail links? I.e. I click an e-mail address, firefox pops open a new tab for gmail compose (assuming I'm logged in)
[05:23] <songwind> crimsun:  what was the script again?
[05:23] <kravlin> it did'nt work at all. The whole thing drove me nuts.
[05:23] <nj786> perdente what were you saying enable the beryls from where?
[05:23] <thebaker> I am using an XP machine as my internet gateway... wirelessly networked to my laptop running latest stable of ubuntu...laptop has atheros based wireless card...using latest stable of madwifi...can;t seem to get my laptop to connect to the network...any ideas?
[05:24] <tritium> m1r: I was away.  Did you get your question answered?
[05:24] <Perdente> you have to go to system, desktop effects and turn them on
[05:24] <Perdente> and then go to apps, system tools, beryl manager and click it
[05:24] <shiester_miester> seaspray, does it give any error output at all, like a little box that says "would you like to see x server output" or anything like that?
[05:24] <nj786> perdente, wil lthis cause bugs?
[05:24] <thebaker> i ahve ath0 configed to adhoc mode
[05:24] <Perdente> no
[05:24] <crimsun> songwind: http://www.linux-sound.info/alsa/index.php?task=support . Use alsa-info.sh.
[05:25] <Jordan_U> seaspray, Did you change anything before you got that error?
[05:25] <kravlin> on a different thread. Is there a Wine Based room somewhere on the internet. I have some questions there i would love to ask there./
[05:25] <Perdente> the worst that can happen is you might have to change some settings to get it working
[05:25] <kbrosnan> lmosher: i have not tried any of these solutions but http://www.google.com/search?q=mailto+gmail+linux
[05:25] <Perdente> but it won't hurt anything you already have
[05:25] <dudaz> is NFS for transfer between linux-linux and samba for transfer between linux-windows
[05:25] <nj786> perdente,  ibelive it is working my windows are jiggling
[05:25] <trisha> bruenig: yah, i see the file.desktop in that folder but i cant still see shortcut file in the desktop
[05:25] <tyt> hello !!
[05:25] <nj786> perdente, now how do i install beryl from the net?
[05:25] <kravlin> otherwise i need to have to create a dual boot between windows an linux on my system.
[05:25] <shiester_miester> kravlin, #winehq
[05:25] <bruenig> trisha, you make one of those and put it on the desktop
[05:25] <m1r> help needed with multirename of files , mrename puts prefix, this command : rename -n 's/\.JPG$/.jpg/' *.JPG , just changes in console the extension
[05:25] <kbrosnan> lmosher: substituting ubuntu for linux may turn up better results
[05:25] <nj786> perdente, lets say i download a beryl but exactly how do i install it?
[05:25] <lmosher> kbrosnan, lol I was searching with mail-to. Thanks :)
[05:25] <songwind> crimsun: http://pastebin.ca/575573
[05:25] <shiester_miester> dudaz, no
[05:26] <tyt> any tell me ,can k3b copy VCD?
[05:26] <dudaz> nj786: take a look at this... http://www.ubuntugeek.com/how-to-install-beryl-with-latest-nvidia-drivers-in-ubuntu-feisty-fawn.html
[05:26] <Perdente> well, are you talking about getting it through synaptic manager, because if you install it that way, its already installed
[05:26] <niuq> mlr: only change in console?
[05:26] <seaspray> shiester_miester: Failed to load module "fglrx" (module does not exist,0) - no drivers available
[05:26] <trisha> bruenig: thats my problem, how do i create that thing, i cant copy and paste on my desktop?
[05:27] <m1r> niuq, i removed -n, it seems it working now
[05:27] <seaspray> Jordan_U: nope
[05:27] <m1r> yes it is working :)
[05:27] <m1r> sry for my impatience :)
[05:27] <dudaz> shiester_miester : can give me in a nutshell..wat is big diff between them
[05:27] <shiester_miester> seaspray, i dont know how to fix that, try googling the error, im sure lots of other people have had the same problem and you might be able to find solutions there
[05:27] <bruenig> trisha, it is a text file, open it in a text editor and see what it looks like
[05:28] <shiester_miester> dudaz, im not sure myself, but i know that you dont have to have samba to do some types of networking with windows
[05:28] <crimsun> songwind: sudo modprobe snd-hda-intel && sudo modprobe snd-hda-intel model=lenovo
[05:28] <nj786> dudaz, it says found swap file or something in terminal when i type sudo vi /etc/apt/sources.list
[05:28] <shiester_miester> you would be better off asking in a samba channel
[05:28] <crimsun> songwind: sorry
[05:28] <crimsun> songwind: sudo modprobe -r snd-hda-intel && sudo modprobe snd-hda-intel model=lenovo
[05:28] <songwind> crimsun:  I put model=lenovo in modprobe.d/alsa-base and got no sound at all
[05:29] <Jordan_U> seaspray, Did you install Nvidia / ATI drivers from outside the repositories?
[05:29] <crimsun> songwind: what precise line did you put?
[05:29] <songwind> crimsun: options snd-hda-intel model=lenovo
[05:29] <DBlue> I was changing some options in gnome welcome panel or what is called, and now i can't log in, i can see only black screen and a busy mouse on the centre of the screen. Now ho to reset the configuration of that to the defaults using virtual terminal?
[05:30] <Perdente> nj786, in the terminal type rm /etc/apt/sources.list~
[05:30] <crimsun> songwind: which mixer elements did you adjust after using model=lenovo/
[05:30] <byonix> how do watch DVD with MOVIE PLAYER?
[05:30] <seaspray> Jordan_U: Newbie here - would not know how to do that
[05:30] <dudaz> nj786: maybe u haf opened that same file in another window/shell
[05:30] <Perdente> make sure you have the tilda
[05:30] <PurpZeY> !dvd | byonix
[05:30] <ubotu> byonix: For playing DVD, see http://help.ubuntu.com/ubuntu/desktopguide/C/video.html - "libdvdcss2" can be found at http://wiki.ubuntu.com/SeveasPackages - Try k9copy (available in !Universe) for backing up DVDs
[05:30] <djh816> hi
[05:30] <pike__> you guys aware of problems with vmlinuz-2.6.20-16-generic and nvidia? i dont feel like investigating so ill just use 15 kernel instead
[05:31] <songwind> crimsun:  Master volume.  I got no sound from the main speakers.
[05:31] <nj786> perdente, okay
[05:31] <djh816> just wondering how i can remap the fn key on my macbook pro to do a right click
[05:31] <crimsun> songwind: you didn't adjust any others?
[05:31] <songwind> No.
[05:31] <nj786> perdente, tilda?e
[05:31] <djh816> like clicking the trackpad while holding the fn key on macbook pro right click. this possible?
[05:31] <Perdente> the ~ at the end
[05:31] <PurpZeY> pike__: If you reinstall the drivers there is generally no issue, the best bet is uninstall, update, reinstall, but a lot of people are just sticking to 15
[05:31] <Jordan_U> seaspray, Just wondering as there are some ( bad ) guides that say for instance to install nvidia drivers directly from nvidia.com, and if you do then they will break any time there is a kernel upgrade
[05:32] <nj786> perdente, yes i do but heres what it says when i type it in terminakl
[05:32] <crimsun> songwind: well that seems a bit inconclusive.  Try the modprobe -r && modprobe command I recommended, then experiment with the other mixer elements.
[05:32] <nj786> perdente, rm: remove write-protected regular file `/etc/apt/sources.list~'?
[05:32] <shiester_miester> Jordan_U, its easier to just use envy, its never caused me any problems
[05:32] <Perdente> oh, osrry
[05:32] <songwind> Okay, will do that.
[05:32] <Perdente> sudo rm /etc/apt/sources.list~
[05:32] <pike__> PurpZeY: yeah i manually installed with same issue. i used nvidia.sh first actually and package and old kernel last resort
[05:32] <seaspray> Jordan_U: How do u intstall a package from the CD
[05:32] <songwind> Crimson:  "Module snd_hda_intel is in use"
[05:32] <nj786> perdente, ok nothing happend
[05:33] <seaspray> Jordan_U: I have located the ATI drivers that i need
[05:33] <Perdente> well, go to /etc/apt and type ls
[05:33] <Perdente> what do you see?
[05:33] <PurpZeY> pike__: I upgraded on my desktop which is an nvdia with no worries, but I am still hesitant to make the jump on my laptop as I hear it causes issues...although I am running an intel chipset over here.
[05:33] <Jordan_U> shiester_miester, If envy has never caused problems for you then you havn't updated your kernel :) you should just use the Restricted Driver Manager because then the package with the drivers will be upgraded along with any new kernel version
[05:33] <Perdente> are there any files with a ~ at the end?
[05:33] <shiester_miester> Jordan_U, i have the most recent kernel update and i used envy to install drivers, and yes no problems
[05:33] <cycom> PurpZeY: what jump?
[05:33] <nj786> perdente, i see my username@desktop when i typed sudo rm /etc/apt/sources.list~
[05:34] <PurpZeY> cycom: To the new kernel.
[05:34] <cycom> PurpZeY: oh.
[05:34] <Wips> I cant figure out how to activate syntax highlighting in Emacs, I've hit the "Syntax Highlighting (Global Font Lock Mode)" in the Optioins-tab, but nothing happends. can Anyone help me?
[05:34] <shiester_miester> Jordan_U, how do you use the restricted driver manager to upgrade drivers?
[05:34] <Perdente> here what happens when you type in sudo -i
[05:35] <tritium> shiester_miester: it's automatic once you use the restricted manager to install them
[05:35] <crimsun> songwind: please spell my nick correctly, else I'll miss it.
[05:35] <Jordan_U> shiester_miester, You don't, you use it to install the drivers in the first place and they get upgraded automatically
[05:35] <songwind> Crimsun:  "Module snd_hda_intel is in use"
[05:35] <shiester_miester> oh ok
[05:35] <crimsun> songwind: close everything using sound; unlock the mixer applet.
[05:35] <Wips> /J Emacs
[05:35] <Wips> ops
[05:35] <nj786> perdente, root@desktop
[05:35] <Perdente> ok, one last time, type in rm /etc/apt/sources.list~
[05:36] <DBlue> How to setup a modem in Ubuntu, cause i don't want to continue working in windows?
[05:36] <Perdente> rm /etc/apt/sources.list~
[05:36] <djh816> is there a linux app for ppl with one button mouse/trackpad?
[05:36] <nj786> perdente, rm: cannot remove `/etc/apt/sources.list~': No such file or directory
[05:36] <pike__> DBlue: i personally prefer a hardware modem but..
[05:36] <Frogzoo> !modem | DBlue
[05:36] <ubotu> DBlue: You want to connect via dial-up? Read https://help.ubuntu.com/community/DialupModemHowto
[05:37] <nj786> perdente, is there suposed to be sudo infron of rm /etc/apt/sources.list~
[05:37] <jamman> DBlue, try http://132.68.73.235/linmodems/index.html#scanmodem
[05:37] <Perdente> you don't want one, so that's good
[05:37] <nj786> perdente, o knothing happend
[05:37] <Perdente> now you can type gedit /etc/apt/sources.list
[05:37] <michia> hey, my sound card only works abotut 10% of the time, any way to fix this or is it a common issue in ubuntu?
[05:37] <Perdente> that will open up a text file editor that edits the file, but if you already have it up, nothings going to happen
[05:38] <nj786> perdente, ok i see my list
[05:38] <shiester_miester> michia, does it sometimes work when u boot and sometimes not?
[05:38] <Perdente> sweet
[05:38] <Jordan_U> michia, That is definitely not a common issue
[05:38] <crimsun> songwind: e.g., kill $(lsof -t /dev/dsp* /dev/audio* /dev/mixer* /dev/snd/*)
[05:38] <shiester_miester> michia, or does it go on and off during a session
[05:38] <nj786> perdente, next step
[05:38] <michia> any way to see whats going on and fix it
[05:38] <michia> naw, stays off
[05:38] <Samad> could someone tell me how to have "ROOT" access in Feisty Fawn?
[05:38] <jamman> !sudo | Samad
[05:38] <ubotu> Samad: sudo is a command to run programs with superuser privileges ("root"). Look at https://help.ubuntu.com/community/RootSudo for all information.
[05:38] <songwind> Crimsun: Got it reloaded, I'm fidding with settings now
[05:38] <Perdente> well, did you do the part about clicking on the beryl manager icon earlier
[05:38] <Samad> My folders say "I'm not the owner.....etc."  Which I am
[05:38] <shiester_miester> michia, ok then, i had a similar problem...do you have multiple sound sources in your computer? like a sound card and onboard sound?
[05:39] <michia> yes actually
[05:39] <tritium> Samad: using sudo is recommended.  See ubotu's response above
[05:39] <nj786> perdente, nope i dont think so.....what do i do?
[05:39] <jamman> Samad, try sudo chmod 777 /dir/to/change
[05:39] <michia> im using the onboard sound, the car is broken
[05:39] <shiester_miester> yeah i had the same issue
[05:39] <DBlue> what means infamous?
[05:39] <jamman> Samad, should give you read write.
[05:39] <cute_bettong> is there any apps for the motorola V3m that will let me tinker with it?
[05:39] <michia> card*
[05:39] <Perdente> go to the applications in the menubar
[05:39] <Samad> no, only read Jamman
[05:39] <bbhrawks> Oh wow..
[05:39] <Perdente> then go to system tools
[05:39] <shiester_miester> michia, take the sound card out and it may work
[05:39] <Samad> don't know why either
[05:39] <jamman> Samad, also try sudo chown Samad /dir/to/change
[05:39] <Perdente> you should see a red gem
[05:39] <Perdente> click that
[05:39] <crimsun> michia: pastebin the output from ``asoundconf list'', then tell me the url of the paste
[05:39] <cormarrr> Hi, just installed Ubuntu and Movie Player is playing movies at about twice as fast as it should, ideas?
[05:40] <songwind> crimsun:  Okay, I got sound, but jack sense still doesn't work.
[05:40] <nj786> ok what do i select
[05:40] <bbhrawks> cormarrr> Is it set to play at 2x? :P
[05:40] <shiester_miester> michia, the problem for me was caused by the 2 devices having a sort of "race" to see which one ubuntu would identify first, which changed from time to time, so sometimes one would work and sometimes not
[05:40] <jamman> Samad, if you want to do it a graphical way (i.e. nautilus,) sudo nautilus
[05:40] <Perdente> is there a red diamond in your bar on the top right
[05:40] <Samad> Jamman, so that does what exactly?
[05:41] <crimsun> songwind: ok, now use the default, which is model=dallas
[05:41] <nj786> a little small window popped open
[05:41] <jamman> !sudo | samad
[05:41] <ubotu> samad: sudo is a command to run programs with superuser privileges ("root"). Look at https://help.ubuntu.com/community/RootSudo for all information.
[05:41] <Perdente> click beryl settings manager
[05:41] <michia> ok yeah sounds good
[05:41] <nj786> perdente, ok now....
[05:41] <Samad> it's not just running programs though, i can't even move a TFF file from my desktop to a folder
[05:41] <jamman> Samad, which folder?
[05:42] <Perdente> well first lets see if beryl is working, hold down control, alt and left click and move your mouse
[05:42] <Samad> ~/.wine/windows/fonts
[05:42] <jamman> Samad, if it's out of your home directory, youll have to use sudo.
[05:42] <jamman> Samad, weird...
[05:42] <Samad> oohhhhh
[05:42] <Samad> yeah I don't understand it at all
[05:42] <jamman> Samad, did you do wineconfig as root?
[05:42] <nj786> perdente, ok my screen is moving like acube
[05:42] <Perdente> yeay!!!
[05:42] <Samad> I'm not sure what you mean by that Jamman
[05:42] <songwind> crimsun:  same behavior
[05:42] <nj786> perdente, what else lolzz
[05:42] <jamman> Samad, try sudo chown Samad /home/Samad
[05:43] <Perdente> want to see something funny shift+f9
[05:43] <crimsun> songwind: have you verified that your dsdt is not broken?
[05:43] <Perdente> do it again to cut down on the rain, if it shows up
[05:43] <songwind> crimsun:  I have not.  How do I verify that?
[05:43] <Samad> Jamman, says invalid user
[05:43] <crimsun> songwind: http://gentoo-wiki.com/HOWTO_Fix_Common_ACPI_Problems
[05:43] <nj786> perdente, nothing happens
[05:43] <Perdente> oh, lol then that ones not on
[05:43] <rich__> uf
[05:43] <jamman> Samad, you must use your user name instead of Samad...
[05:43] <Perdente> ok in the settings manager what tabs do you have?
[05:43] <Samad> it is Samad
[05:44] <jamman> Samad, lowercase...
[05:44] <jamman> Samad, try sudo chown samad /home/Samad
[05:44] <Samad> fucking linux
[05:44] <Samad> lol
[05:44] <ruks> i do have one problem,i installed amule but when i connect it says kad off and when i go to download the nodes for it in amule it wont let me or kicks me out of the program
[05:44] <PurpZeY> !ohmy | samad
[05:44] <ubotu> samad: Please watch your language and keep this channel family friendly.
[05:44] <jamman> Samad, watch your language man...
[05:44] <DBlue> Is there a program who can identify my modem in windows, so i could download it for my Ubuntu?
[05:44] <Perdente> here in the beryl setting manager go to visual effects
[05:44] <Samad> oops, won't happen again
[05:44] <Beastlykings> The most multi tasking I do is Internet and music at the same time. Would it be better to turn off hyperthreading?
[05:44] <nj786> perdente, general options, window management, desktop,visual effects, accesibility, extras, development, image format
[05:44] <PurpZeY> For anyone who was here a second ago, and listening to my worries about the upgrade, I just did it, without any hitch.
[05:44] <jamman> DBlue, try http://132.68.73.235/linmodems/index.html#scanmodem
[05:45] <DBlue> I'm threr
[05:45] <Perdente> ok, go to visual effects
[05:45] <DBlue> I'm there
[05:45] <Perdente> there are some cool ones
[05:45] <Samad> Jamman, still nothing
[05:45] <nj786> perdente, which is the best
[05:45] <nj786> lol
[05:45] <Samad> just drops a line
[05:45] <Perdente> click the animations
[05:45] <nj786> i do not know anything
[05:45] <nj786> lol
[05:45] <PurpZeY> nj786: It's all preference.
[05:45] <jamman> DBlue, download the scanmodem utility.
[05:45] <PurpZeY> nj786: I like flame, and xplod.
[05:45] <Nwallins|home> Hi, i used checkinstall to install compiled software.  how can I tell apt to not try and "update" it?
[05:45] <jamman> Samad, ok, now you should be able to change your .wine directory via the file browser
[05:46] <Perdente> you'll see minimize is the first option, you can change the drop down menu to different effects and minimize the manager to preview it
[05:46] <Perdente> do fire its sweeet
[05:46] <PurpZeY> Perdente: I agree.
[05:46] <Jordan_U> !pin | Nwallins|home
[05:46] <ubotu> Nwallins|home: pinning is an advanced feature that APT can use to prefer particular packages over others. See https://help.ubuntu.com/community/PinningHowto
[05:46] <Sepero> Nwallins|home: sudo aptitude
[05:46] <Sepero> Nwallins|home: sudo aptitude
[05:46] <Nwallins|home> Jordan_U: thx
[05:46] <nj786> perdente, exactly where is fire?
[05:46] <Samad> Jamman, still can't write to that folder
 Where can i find that scanmodem tool?
[05:46] <Jordan_U> Nwallins|home, np
[05:46] <jamman> Samad, well, im out of ideas.
[05:47] <nj786> perdente, i dont know where it is
[05:47] <PurpZeY> nj786: First you have to choose what "action" you want to use that animation...So pick open, or close, or minimize...Then chose flame.
[05:47] <Perdente> nj786 its burn
[05:47] <Sepero> Nwallins|home: After you open aptitude, find the program, then press "h" on it. It will hold.
[05:47] <Perdente> the third down or second
[05:47] <jamman> DBlue, about halfway down the page. Search Scanmodem
[05:47] <Samad> Jamman, here's what it says: "You do not have permissions to write to this folder."
[05:47] <Perdente> then minimize the window
[05:47] <jamman> Samad, did you change the permissions in nautilus?
[05:47] <nj786> perdente, where is burn?
[05:47] <PurpZeY> nj786: You have to expand the choices...Then you can chose the animation
[05:47] <Samad> I didn't change anything there, Jamman
[05:47] <nj786> i do not see it
[05:47] <songwind> crimsun:  Recompiled with no errors or warnings, so my dsdt is not buggy
[05:47] <Samad> Jamman, where and what should I change in Nautilus?
[05:48] <PurpZeY> nj786: click the sideways arrow so it points down...Then you can chose whatever animation you want.
[05:48] <RabidGoblin> hey, anyone here know a lot about installing Radeon drivers with ubuntu?
[05:48] <PurpZeY> !ATI
[05:48] <ubotu> To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto
[05:48] <crimsun> songwind: ok, then file a bug upstream using Mantis
[05:48] <ruks> http://i29.photobucket.com/albums/c273/hustlingsxr/0618071744.jpg
 I searched, no result
[05:48] <Perdente> yeah, purpzey is right!
[05:48] <Perdente> i forgot lol
[05:48] <nj786> purpzey,  icannot
[05:48] <Nwallins|home> Sepero: even better.  that wiki page is rough
[05:48] <nj786> purpzey, there si nothing there
[05:48] <Perdente> I think he means more packages
[05:48] <Perdente> oh did you download them all?
[05:48] <PurpZeY> nj786: What window are you in right now?
[05:48] <bullgard4> lspci -vv prints: "0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRIV (ICH6 Family) SMBus Controller (rev 03)." What does 0000:00:1f.3 mean?
[05:48] <jamman> Samad, well, to change the .wine you must go to views and select "show hidden files". next right click .wine and change the read only under owner to write.
[05:48] <jamman> DBlue, let me post bin it.
[05:48] <Sepero> Nwallins|home: No prob.
[05:49] <Nwallins|home> looking for ffmpeg
[05:49] <PurpZeY> nj786: Specifically, which tab on top, which choice on the left?
[05:49] <Perdente> anyway, you play there are some cool features, like alt tab shows a preview, the top right corner of the screen picks all the different apps
[05:49] <Nwallins|home> the category system kind of sucks
[05:49] <Samad> Jamman, where can I find the "views" folder?
[05:49] <Nwallins|home> with aptitude
[05:49] <shane_>  #ubuntustudio
[05:49] <nj786> purpzey. in visual effects
 I'm using mirc
[05:49] <Sepero> Nwallins|home: type /ffmpeg
[05:49] <ReverendD^Away> Anyone able to offer some info on an installation w/o a working CD rom?
[05:49] <Nwallins|home> Sepero: ha, thanks
[05:49] <PurpZeY> nj786: And what choice on the left?
[05:49] <Perdente> you'll see in visual effects that there are some untabbed options, if you tab those, they will activate it
[05:49] <Sepero> Nwallins|home: The "/" begins a search
[05:49] <Samad> Jamman, NM Found it
[05:49] <jamman> Samad, its in the toolbar... file... view... edit... just some examples. (thats not the path)
[05:50] <Nwallins|home> Sepero: yeah, like less and vi
[05:50] <jamman> Samad, sorry about that.
[05:50] <kravlin> hey. i have ubuntu taking up my entire hard drive but for gaming i would like to have windows as a boot option (Satanistic.. I know) anyway. anyone know an easy way to do this without having to reload all of ubuntu and spend a few days setting it all up again?
[05:50] <ruks> i do have one problem,i installed amule but when i connect it says kad off and when i go to download the nodes for it in amule it wont let me or kicks me out of the program
[05:50] <Nwallins|home> Sepero: 'h' is ineffective, still shows 'i'
[05:50] <nj786> purpzey,  umean what tabs o nthe left?
[05:50] <jamman> DBlue, so are you in terminal only?
[05:50] <Sepero> less rules :)
[05:50] <songwind> crimsun:  Mantis appears to be a software package, web based.  Any particular instance of mantis? :)
[05:50] <PurpZeY> nj786: Yes.
[05:50] <Sepero> Nwallins|home: Try =
[05:50] <ruks> dblue have u had any problems since u installed beryl?
[05:50] <Nwallins|home> ok, shows ih
[05:50] <crimsun> songwind: Mantis is the bug tracker.  Click Bug Reporting[..]  on the ALSA home page.
[05:50] <uakkeri> hi
[05:50] <nj786> purpzey, windows management, desktop, general options
[05:50] <Sepero> Nwallins|home: congrats
[05:50] <Perdente> personally I'm a fan of the cube, it works well with my add
[05:50] <songwind> crimsun:  okay, thanks for your help.
[05:50] <DBlue> I reinstalled Ubuntu
[05:50] <Nwallins|home> thanks :D
[05:51] <PurpZeY> nj786: Switch over to "Visual Effects," then "Animations" (on the left)
[05:51] <Sepero> Nwallins|home: welcome :)
[05:51] <uakkeri> i have a overheating problem with ubuntu and ibm thinkpad t30
[05:51] <nj786> purpzey, ok and then?
[05:51] <uakkeri> how to set the fan speed to fixed max value?
[05:51] <darwin81> Is there a graphical program for MD5 checksums where you can point to a file and put in the checksums?
[05:51] <Nwallins|home> Sepero: hit 'q' to quit..  still have update blinking on gnome bar.  is that just a cache issue?
[05:52] <PurpZeY> nj786: See how the tabs (un)minimize and that sort of thing?
 I will log off from this stupid OS, and try to log in Ubuntu!
[05:52] <kravlin> hey. i have ubuntu taking up my entire hard drive but for gaming i would like to have windows as a boot option (Satanistic.. I know) anyway. anyone know an easy way to do this without having to reload all of ubuntu and spend a few days setting it all up again?
[05:52] <jamman> DBlue, wait, are you in windows now?
[05:52] <nj786> purpzeym yes
[05:52] <nj786> purpzey, yes i do
[05:52] <Sepero> Nwallins|home: q to quit, then y choose Yes quit
[05:52] <Perdente> well I"m out, bed time...
[05:52] <Perdente> have fun nj786
[05:52] <Sepero> Nwallins|home: Press Ctrl+L to clear your screen
[05:52] <Nwallins|home> yeah, update manager still wants to "upgrade" to the older, packaged version
[05:53] <vip3rousmango> Can I install Windows Xp Into wine?
[05:53] <nj786> perdente, thank you
[05:53] <PurpZeY> nj786: Ok, so, for example, see it says "minimize"...Click on the little arrow pointing to the right and that will expand the menu.
[05:53] <Perdente> np have fun
[05:53] <Perdente> adios
[05:53] <jamman> DBlue, try http://pastebin.com/931774
 I don't have a choise!
[05:53] <nj786> purpzey, ok and
[05:53] <jamman> DBlue, copy that into a file that you can get to ubuntu.
[05:53] <kravlin> huh? why would you try to install windows xp into wine? Its a compatability layer. it acts like windows xp.
[05:53] <PurpZeY> nj786: See "minimize animation" ?
[05:53] <Sepero> Nwallins|home: Still?
[05:53] <nj786> purpzey, yes
[05:54] <Samad> Jamman, When I attempt to change the properties of my .wine folder, all of the options are greyed out and it says, "You are not the owner, so you can't change these permissions."
[05:54] <NeoGeo64> Someone help... I just reinstalled Ubuntu and before the volume up and down buttons on my keyboard were able to control the volume... now they wont.  How can I fix this?
[05:54] <Nwallins|home> Sepero: brb
[05:54] <PurpZeY> nj786: on the "minimize animation" pull down, select "burn"
[05:54] <jamman> Samad, did you do sudo chown samad /home/samad/.wine
[05:54] <nj786> purpzey, o kand then
[05:54] <nj786> ok*
[05:54] <craigbass1976> Anyone ever heard of software to help design model railroads for linux?
[05:54] <PurpZeY> nj786: Then minimize the window
[05:54] <vip3rousmango> kravlin: i know, but there are things taht run in windows that won't work in wine, so im wondering if i can install windows so wine can emulate a running windows eviroment
 First i can't log in Ubuntu for that reason, and the modem problem, i tried the modem from the live cd and that how i know that i don't have drivers for it.
[05:54] <vip3rousmango> or is that more of a vmware thing?
[05:54] <nj786> purpzey, MOTHER OF PEARL WOW!
[05:55] <Samad> Jamman, there we go no it's unlocked
[05:55] <Samad> now*
[05:55] <jamman> DBlue, what reason? no share. no internet?
[05:55] <jamman> Samad, good.
[05:55] <ReverendD^Away> Seeking info on an install w/o a CD Rom. Is anyone available to offer some info/advice?
[05:55] <dougsko> craigbass1976: http://sourceforge.net/search/?type_of_search=soft&words=model+railroad
[05:55] <Samad> Jamman, so does sudo chown.....   remove the permissions?
[05:55] <nj786> prupzey, do i have to make changes on minimize to? or i dont have to
[05:55] <jamman> brb.
[05:55] <vip3rousmango> ReverendD^Away: you need the liveCD for the install, its the easyest and hassle-free way
[05:55] <Frogzoo> vip3rousmango: wine = wine is not an emulator ;)
[05:55] <PurpZeY> nj786: You don't have to. You can make the length longer, so it goes for longer, or for shorter, so it's not as slow....Or you can leave it.
 I told you the Gnome welcome screen
[05:56] <kravlin> vip3rousmango: i wouldn't say so. You could partition your hard drive and install windows onto the other partion. Thats why im here. To try and find info on how to do that.
[05:56] <vip3rousmango> Frogzoo: ok, so i'd just have to suck it up and make a duel boot then?
[05:56] <nj786> purpzey, o kis there anything else i need to know about beryl
[05:56] <PurpZeY> nj786: Then do the same for unminimize, for whatever animation you want, and then, for open...etc...
[05:56] <dougsko> craigbass1976: sourceforge and freshmeat are always good places to look for random stuff like that
[05:56] <Frogzoo> vip3rousmango: or run a virtual machine - vmware/qemu
[05:56] <NeoGeo64> hmm
[05:56] <vip3rousmango> can't install vmware..
[05:56] <NeoGeo64> Maybe I should re-enable hotkeys suppport?
[05:56] <craigbass1976> dougbrowne, xtrkcad is in a repo!  I thought sure I looked the other day...
[05:56] <Samad> Is there anyway to "CHOWN" an entire directory and it's sub-folders?
[05:57] <Frogzoo> vip3rousmango: sure you can
[05:57] <PurpZeY> nj786: You can change settings for specific animations if you go more to the right in the tabs...Like, change the color of the flame...turn on smoke...or change beamup...and then you have your desktop cube too.
[05:57] <cwatson> Samad, chown user.group -R folder
[05:57] <vip3rousmango> Frogzoo: nope, whenever i try to install the packages i get an error saying its conflicting with something else, but what I have no idea.. andit doesn't say
[05:57] <DBlue> What is 3Ddesktop.deb
[05:57] <PurpZeY> nj786: If you haven't seen that, hit ctrl + alt + mouse drag.
[05:57] <uakkeri> IBM t30 overheating problem... plz help
[05:58] <craigbass1976> dougsko,  xtrkcad is in a repo!  I thought sure I looked the other day...
[05:58] <nj786> purpzey. no i have
[05:58] <nj786> purpzey, is there anything else on here
[05:58] <jamman> DBlue, sorry i missed that part. would you mind telling me again?
[05:58] <ReverendD^Away> uakkeri - i dont think its *nix. IBM thinkpads are just how. I run a A22e and it burns my lap.
[05:58] <Frogzoo> vip3rousmango: suggest you d/l vmware from their website
[05:58] <ReverendD^Away> hot*
[05:58] <jamman> Samad, it changes the owner.
[05:58] <Nwallins|home> Sepero: no dice.  Update manager still wants ffmpeg
[05:58] <jamman> Samad, hence, ch(change)own(owner)
[05:58] <Nwallins|home> double-checking aptitude...
[05:59] <andruk_> how do i get a reiserfs partition to read/write mode?  here is my fstab: http://paste.ubuntu-nl.org/26219/
[05:59] <dougsko> craigbass1976: good stuff. the repos rule
[05:59] <NeoGeo64> Someone help... I just reinstalled Ubuntu and before the volume up and down buttons on my keyboard were able to control the volume... now they wont.  How can I fix this?
[05:59] <cwatson> uakkeri, do you have the thinkpad utils package installed?
[05:59] <PurpZeY> nj786: Seriously, there is an absolute ton of stuff to play with in beryl....For any action a window can make...A popup menu, a drop down menu, a different skydome when you rotate, transparent desktop...I mean, the variables are totally endless, and limited mostly by your patience in changing the settings.
[05:59] <dougsko> well d00dz, ive been in this base long enough...catch yall later
[05:59] <Samad> Jamman, OH n:ce
[05:59] <kravlin> hey. i have ubuntu taking up my entire hard drive but for gaming i would like to have windows as a boot option (Satanistic.. I know) anyway. anyone know an easy way to do this without having to reload all of ubuntu and spend a few days setting it all up again?
[05:59] <Nwallins|home> Sepero: ffmeg shows 'ih'
[05:59] <PurpZeY> kravlin: I am sure there is a safe way to do it, but I hear a windows install tends to eat grub.
[06:00] <jamman> NeoGeo64, go to the keyboard shortcuts vi System -> Prefrences -> Keyboard Shortcuts
[06:00] <uakkeri> ReverendD^Away, cwatson: thinkpad utils.... let me check
[06:00] <jamman> Samad, solve it?
[06:00] <RabidGoblin> hey, i just installed ubuntu and for some reason if i switch to a console (ctrl+alt+F1) then try to switch back the screen just goes black and I can't do anything.  Anyone else have this problem?
[06:00] <bullgard4> lspci -vv prints: "0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRIV (ICH6 Family) SMBus Controller (rev 03)." What does 0000:00:1f.3 mean?
[06:00] <nj786> purpzey, ok now what is this stufff that u can download off of here http://www.gnome-look.org/index.php?xcontentmode=103&PHPSESSID=9e4f04a0bc16034bca31d8a9954889d9
[06:00] <Nwallins|home> aptitude thinks it's an upgradeable package
[06:00] <vip3rousmango> Frogzoo: wait, do i need the VMPlayer AND VMWare Server, or just the player to install/run windows emulation? Because I have the player, the server is what gives me the error message
[06:00] <andruk_> kravlin: figure out how to reinstall grub without reinstalling ubuntu, then repartition with gparted, install windows normally, and then restore grub
[06:00] <nj786> purpzey, some beryl stuff
[06:00] <jamman> kravlin, yes windows installs kill grub. i had to reinstall ubuntu to get my grub working right.
[06:00] <BlueD> My modem connection was dropped
[06:00] <sql_hesw> Is there any website downloader for ubuntu?
[06:01] <NeoGeo64> do i need to start gnome for this to take effectr
[06:01] <Samad> Jamman, I ran: "chown samad.samad -R ~/.wine
[06:01] <cwatson> RabidGoblin, I have heard of this problem when using the propietary ATI drivers
[06:01] <NeoGeo64> because its still not working i just reset the keys
[06:01] <kravlin> PurpZey: I figured somewhere there has to be a guide to this or something.
[06:01] <Samad> Jamman, and it said not permitted, so no
[06:01] <andruk_> sql_hesw: what do you mean website downloader?
[06:01] <Frogzoo> vip3rousmango:  you need the player & a vmx file - http://www.easyvmx.com/
[06:01] <PurpZeY> nj786: Those are emerald themes...If you right click on your beryl manager, you'll see, "Emerald Manager" so you can have different window themes...and also, you can find skydomes there.
[06:01] <jamman> Samad,  try "chown -R samad ~/.wine
[06:01] <jamman> "
[06:01] <sql_hesw> i want to download a website, some thing like web reaper in windows
[06:01] <RabidGoblin> cwatson, yeah thats what i figured might be it.  would that be the reason et runs terribly (20fps) too? and how should i go about fixing this?
[06:01] <uakkeri> cwatson: can you tell me the precise package name?
[06:02] <PurpZeY> kravlin: I *think* what you have to do is install windows and then recover grub.
[06:02] <PurpZeY> !grub
[06:02] <ubotu> grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto
[06:02] <nj786> purpzey, how do i sintall them when i download them off that site?
[06:02] <Samad> Jamman, actually it looks like just throwing Sudo on the front did it
[06:02] <SyckSyn> After a recent reboot, grub fails with error 15.  The error persists through repeated attempts to reinstall grub with a live cd, as well as completely reinstalling Ubuntu.  Can anyone suggest a cause to the problem or a method of fixing it?
[06:02] <PurpZeY> kravlin: I'm not positive.
[06:02] <kravlin> yeah.
[06:02] <bluebanana> I have a DVD movie. How do I make a copy for me to watch when the DVD is not in my disc drive?
[06:02] <vecina> um... how come pressing 'backspace' when i have the shift key held down logs me out?
[06:02] <Samad> Jamman, it just dropped a line, and they were "unlocked"
[06:02] <andruk_> sql_hesw: i know there is one, but i dont know what it is called, gimme a sec..
[06:02] <BlueD> Jamman, the problem was in gnome options that i set, now users loging not starting
[06:02] <sql_hesw> sure
[06:03] <PurpZeY> nj786: I've never actually done it myself, I used a stock emerald theme, presumably, download and drag it into the manager...If not just read the included docs...Personally, I like the skydomes better, I found the emerald themes included to be sufficient.
[06:03] <jamman> Samad, ok.
[06:03] <natbet> using dmraid I can see my raid partition but I'm not sure how to mount and access it, anyone know how to do this?
[06:03] <cwatson> RabidGoblin, what does "glxinfo| grep direct" give you?
[06:03] <Sepero> Nwallins|home: Is it still trying to update ffmpeg?
[06:03] <nj786> purpzey, and what are skydomes?
[06:03] <jamman> BlueD, are you in a terminal? if so do "sudo gdm"
[06:03] <nj786> purpzey, what we just did?
[06:03] <PurpZeY> nj786: When you do ctrl+alt+mouseclick, it is a black background right?
[06:03] <RabidGoblin> cwatson, direct rendering: Yes
[06:03] <Samad> Jamman, what does the -R stand for in that command?
[06:04] <BlueD>  Jammanm, tell what to do, and then to reboot
[06:04] <Samad> I need to learn the Syntax of the Linux command line
[06:04] <darwin81> Is there a better way of checking MD5SUMs other than just looking at them?
[06:04] <BlueD> Samad what you need?
[06:04] <jamman> Samad, -R=recursive
[06:04] <jamman> Samad, basically do the whole folder recursivly
[06:04] <Samad> Jamman, ty again
[06:04] <PurpZeY> Samad: If you ever need to know specific options for a particular command, you can always run man <program> and check.
[06:04] <andruk_> sql_hesw: httrack is the name.  but it is a console-based program
[06:04] <nj786> purpzey, i dono what u mean?
[06:04] <jamman> Samad, try what again?
[06:05] <theshadow> is the beryl-themes package not available anymore?
[06:05] <Samad> Jamman, TY again ;)
[06:05] <PurpZeY> nj786: As of now, if you press ctrl+alt+mouse drag, you can rotate the cube, correct?
[06:05] <sql_hesw> andruk_:np, i will use it , thanks
[06:05] <nj786> purpzey, yes
[06:05] <jamman> Samad, no prob.
[06:05] <andruk_> sql_hesw: welcome
[06:05] <Samad> awesome, well that's plenty of learning in 15 minutes......gotta work tomorrow calling it a night
[06:05] <eduhat> anyone know if nano or pico have autoindent and syntax coloring?
[06:05] <Samad> thanks again Jamman, have a good one
[06:05] <andruk_> eduhat: nano does not have syntax highlighting
[06:06] <PurpZeY> nj786: A skydome will create a background panorama type deal, so that it's not black, it's some other cool background image you choose...But, you have to get one that's the right resolution for you.
[06:06] <jamman> Samad, anything else, my user is borris.morris at ubuntuforums.org
[06:06] <eduhat> andruk_: pico does?
[06:06] <cwatson> RabidGoblin, do you know what version of the driver you are running?
[06:06] <jamman> i've got to call it a night too...
[06:06] <BlueD> Jamman> If i connection from Ubuntu with my 56k modem, will the connection be faster then the one in windows?
[06:06] <nj786> purpey, oh ok can you show me yours?
[06:06] <nj786> purpzey*
[06:06] <BlueD> i ment mine
[06:06] <uakkeri> cwatson: i found thinkpad-base and thnikpad-source
[06:06] <andruk_> eduhat: i have no idea, all i know is that nano does not do syntax highlighting
[06:06] <Samad> Jamman, awesome I'll look you up.....mine should be either Samad or
[06:06] <Samad> al Samad
[06:06] <eduhat> andruk_: allright.
[06:06] <andruk_> eduhat: sry...
[06:07] <RabidGoblin> cwatson, nah, how would i check?
[06:07] <andruk_> sql_hesw: webhttrack is httrack with a web interface at least
[06:07] <SyckSyn> After a recent reboot, grub fails with error 15.  The error persists through repeated attempts to reinstall grub with a live cd, as well as completely reinstalling Ubuntu (7.04).  Can anyone suggest a cause to the problem or a method of fixing it?
[06:07] <BlueD> Uh, i'm not waked yet, that's why i make write errors.
[06:07] <mike__> link to the wine irc please?
[06:07] <jamman> BlueD, mmm... maybe. I noticed that with my wireless, i get much better signals in linux, and with ndiswrapper... which uses the WINDOWS DRIVERS!!!
[06:07] <uakkeri> sudo cat /proc/acpi/thermal_zone/THM0/trip_points
[06:07] <uakkeri> critical (S5):           94 C
[06:07] <uakkeri> passive:                 87 C: tc1=5 tc2=4 tsp=600 devices=0xdeb99338
[06:07] <PurpZeY> nj786: I am using Milky2_by_Eeitam.png I got it of gnome-look I think, or beryl-look....There are a ton of them available...You are just limited to the resolution your card can support. Someone in #wine can give you the specific details.
[06:07] <jamman> BlueD, it should be, I'm not awake yet...
[06:07] <cwatson> uakkeri, hmm I can't find it. maybe it was just a dapper thing
[06:08] <jamman> BlueD, j/k
[06:08] <natbet> anyone know how to mount a raid partition?
[06:08] <PurpZeY> !Raid | natbet
[06:08] <ubotu> natbet: Raid and LVM --> very easy guide for alternate CD : http://users.piuha.net/martti/comp/ubuntu/raid.html Tips and tricks for RAID and LVM can be found on https://help.ubuntu.com/community/RaidConfigurationHowto and http://www.tldp.org/HOWTO/LVM-HOWTO
[06:08] <BlueD> Jamman, i told you
[06:08] <nj786> purpzey, okay
[06:08] <mike__> what raid setup?
[06:08] <cwatson> uakkeri, there used to be a script, /etc/init.d/thinkpad-utils
[06:08] <PurpZeY> nj786: Not #wine...I am an idiot...#beryl
[06:08] <natbet> raid 0
[06:08] <natbet> fake raid
[06:08] <nj786> purpzey, its ok lol
[06:09] <theshadow> was the beryl-themes package removed?
[06:09] <jamman> cwatson, there is none.
[06:09] <mike__> you should be able to setup raid when you install ubuntu
[06:09] <nj786> purpzey, and does this beryl stuff get bugs?
[06:09] <jamman> cwatson, what exactly would this do, btw?
[06:09] <BlueD> Jamman, in the live cd i read something about NAT
[06:09] <natbet> I already have ubuntu installed
[06:09] <NeoGeo64> That hotkey thing didn't help.  I'm able to use the buttons and a little volume meter will pop up, but I'm not able to actually control the volume with it.  How can I fix this?
[06:09] <jamman> NAT... hmmm. you might have to fill me in.
[06:09] <mike__> one sec
[06:09] <hayden_> does anyone know of a linux application that can burn .cdr disc images?
[06:10] <BlueD> K3b
[06:10] <jamman> !nat
[06:10] <ubotu> Sorry, I don't know anything about nat - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[06:10] <PurpZeY> nj786: Well, it is not final, or totally stable, so, it's not bug-free...I've run into a few problems here and there, most of them are solved by reloading the window-mananger (beryl) OR switching to Gnome and then back to beryl...But, it is not 100% stable...It shouldn't fubar your system, but, like I said it isn't stable.
[06:10] <BlueD> Sorry hayden, i didnt read all the sentence
[06:10] <PurpZeY> nj786: I haven't run into any problems to speak of, but that doesn't mean other people don't.
[06:11] <nj786> purpzey, if i run into truble what should i do?
[06:11] <andruk_> how do i get a reiserfs partition to read/write mode?  here is my fstab: http://paste.ubuntu-nl.org/26219/
[06:11] <SyckSyn> After a recent reboot, grub fails with error 15.  The error persists through repeated attempts to reinstall grub with a live cd, as well as completely reinstalling Ubuntu (7.04).  Can anyone suggest a cause to the problem or a method of fixing it?
[06:11] <hayden_> BlueD, yea I tried K3B with no luck. It is a weird file format for cd imaging :(
[06:11] <NeoGeo64> Can anyone help me?
[06:11] <mike__> natbet: try this http://www.howtoforge.com/forums/showthread.php?t=3037
[06:12] <darwin81> Can I compare the contents of a CD to an ISO file?
[06:12] <slavi1> is there a way to fix an ntfs partition from feisty?
[06:12] <BlueD> Try some type converter cdd to iso
[06:12] <BlueD> ups cdr
[06:12] <jamman> BlueD, like ipfilter?
[06:12] <NeoGeo64> I'm able to use my keyboard's volume control buttons to make the little volume popup appear and I can move it up and down and even mute it, problem is... its not doing anything to the volume.
[06:12] <RabidGoblin> cwatson, should i download a new driver from the ATI site?
[06:12] <PurpZeY> nj786: Well, first step, switch back to GTK as your window-manager, then you can try to reload beryl, or reboot, or whatever you feel is proper...If you get locked out of gnome somehow b/c of it, you'd have to drop into a terminal (I had to do this once) kill beryl manually, and just restart X...It's not too big of a deal...But some people from #beryl helped.
[06:12] <andruk_> slavi1: no, ubuntu can only read and write to ntfs, not repair
[06:12] <nj786> purpzey, how do i change the window color from beryl it changed ym window color
[06:13] <BlueD> How can in write ntfs
[06:13] <mike__> natbit that help at all?
[06:13] <cwatson> RabidGoblin, maybe... I'm not sure how to check the version though
[06:13] <jamman> NeoGeo64, in System -> Prefrences -> Sound change the channels it changes, usually master.
[06:13] <nj786> purpzey, my window is red
[06:13] <nj786> purpzey, meaning the borders
[06:13] <PurpZeY> nj786: That is in emerald themes...So, right click on the little diamond, then go to emerald theme manager and select a color/setup you prefer.
[06:13] <natbet> mike__: I'm reading it now, looks like it might help
[06:14] <NeoGeo64> ok I am there... what do i change?
[06:14] <BlueD> Jamman, you didn't told me now how to set the default user login
[06:14] <NeoGeo64> jamman: THANKS
[06:15] <NeoGeo64> jamman: prob solved
[06:15] <SyckSyn> After a recent reboot, grub fails with error 15.  The error persists through repeated attempts to reinstall grub with a live cd, as well as completely reinstalling Ubuntu (7.04).  Can anyone suggest a cause to the problem or a method of fixing it?
[06:15] <jamman> BlueD, in System -> Admin -> Login Screen. In the Security tab I believe.
[06:15] <uakkeri> cwatson: there was't this script you proposed in /etc/init.d
[06:15] <jamman> NeoGeo64, no prob.
[06:15] <jamman> BlueD, i need to hit the hay now.
[06:15] <BlueD>  Jamman in terminal how to do that?
[06:16] <jamman> BlueD, see if somebody else can pick up.
[06:16] <uakkeri> cwatson: i'm using feisty
[06:16] <jamman> BlueD, to get to a non-terminal try sudo gdm.
[06:16] <BlueD> And what it do?
[06:16] <BlueD> i ment does
[06:17] <jamman> BlueD, starts the Gnome Display Manager.
[06:17] <jamman> good night.
[06:17] <BlueD> Here is morning
[06:17] <bluebanana> what's program is recommended for newbies who want to rip DVD movies ?
[06:17] <Trixsey> OSS is working for me, and ALSA isn't. How do I change from OSS to ALSA?
[06:17] <BlueD> K3B
[06:17] <PurpZeY> SyckSyn: A full reinstall is still causing problems?
[06:17] <yknott> bluebanana: dvd::rip, k3b,
[06:18] <BlueD> I will be right back, after breakfast!
[06:18] <hatter> ffmpeg does not do audio encoding by default in feisty ?
[06:18] <AlphaCluster> I need help getting a sata hard drive to show up
[06:18] <SyckSyn> yes, granted i used the guided format, not fdisk.  but a full reinstall none the less.
[06:18] <bluebanana> yknott, i 've just installed dvd::rip, but now it's asking for mplayer
[06:18] <bluebanana> do i have to download mplayer?
[06:18] <PurpZeY> SyckSyn: Do you have some other partition?
[06:18] <bluebanana> i don't want any unnessery programs on my computer
[06:18] <AlphaCluster> 03:00.0 SATA controller: JMicron Technologies, Inc. JMB361 AHCI/IDE (rev 02)
[06:19] <SyckSyn> yes. 2 other hard disks even, 1 partition each
[06:19] <Trixsey> bluebanana, mplayer is the best video player out there!
[06:19] <SyckSyn> and the swap partition of course
[06:19] <AlphaCluster> ^that is the type if anyone knows of a kernel mod i need that would be great
[06:19] <bluebanana> I installed thoggen (dvd ripper program) but it's saying that I can't use it if I don't have libdvdcss2 installed.
[06:19] <yknott> perhaps mplayer mencoder
[06:19] <nj786> purpzey, what else can you do?
[06:19] <PurpZeY> SyckSyn: But, this harddrive is totally dedicated to linux?
[06:19] <yknott> bluebanana: blued's suggestion was to use k3b
[06:19] <bluebanana> but I couldn't find libdvdcss2 in repository
[06:19] <bluebanana> help
[06:19] <bluebanana> k3b is for kubuntu?
[06:19] <SyckSyn> yes, the hard drive it is installed on as well as the other two are totally for linux
[06:20] <yknott> ah ok,
[06:20] <hatter> bluebanana, i just used acidrip a short while ago
[06:20] <PurpZeY> nj786: You can change the caps on your cube, but personally, I just liked tweaking the animations, for minimize, create, close, menu popups, for everything my desktop does I have an animation.
[06:20] <yknott> or yeah acidrip is another
[06:20] <hatter> with no problems
[06:20] <AlphaCluster> bluebanana: libdvdcss2 cannot be hosted on teh repos for legal reaons
[06:20] <yknott> frontend that may do what you want
[06:20] <bluebanana> AlphaCluster, where do ubuntu users get libdvdcss2
[06:20] <yknott> bluebanana: then you could use automatix2 to get the codecs
[06:20] <AlphaCluster> yeah
[06:20] <AlphaCluster> or try wiki.ubuntu.com
[06:20] <cwatson> uakkeri, do you have the apm packages installed?
[06:21] <bluebanana> yknott, i've been trying to avoid automatix2
[06:21] <AlphaCluster> and search for it
[06:21] <yknott> o
[06:21] <bluebanana> yknott, don't want to get clutter on my hard drive
[06:21] <AlphaCluster> so anyone know about SATA?
[06:21] <Trixsey> OSS is working for me, and ALSA isn't. How do I change from OSS to ALSA? Anyone?
[06:21] <nj786> purpzey, how do  uget that rain stuff on there
[06:21] <nj786> and all that
[06:21] <yknott> Search for Another Technical Answer?
[06:21] <SyckSyn> Its a cause of some frustration, for the past 6 hours or so been going through forums trying to find a method to fix it. decided to try a full reinstall after backing up some data.  But that still leaves the system unbootable
[06:22] <Zack> does anyone in here understand Wine?
[06:22] <yknott> Zack:  sure what is up
[06:22] <SyckSyn> understand to what degree?
[06:22] <PurpZeY> nj786: rain is under-extras, but personally I find it to be annoying more than anything else .
[06:23] <Dr_willis> wine =  White with fish.  Red with Beef. :)
[06:23] <Zack> Well, Could anyone tell me why it crashes on internet login screens?
[06:23] <nj786> purpzey, when does it appear?
[06:23] <yknott> Zack: for example?
[06:23] <Zack> such as Battle.net
[06:23] <PurpZeY> nj786: If you go to extras, and then to rain, you can set a key-command to activate it.
[06:23] <Zack> it turns black and closes
[06:23] <SyckSyn> my wine doesnt crash when battle.net runs... what game?
[06:23] <Zack> starcraft
[06:24] <corhere> How would I be able to copy a directory hierarchy in such a way that it is like cp -u but it also deletes files in the destination that are not in the source directory?
[06:24] <SyckSyn> ... delete the source directory then cp?
[06:24] <Zack> huh?
[06:24] <yknott> Zack: neither does mine, which version of wine?
[06:24] <Zack> latest
[06:24] <corhere> SyckSyn: i would prefer to avoid that, as this is for a DAP and it would take too long
[06:24] <Trixsey> I have some trouble with my sound card: http://www.mathbin.net/11586
[06:24] <Trixsey> Any ideas?
[06:24] <navets> k thix will probably sound stupid but how do you create a straight line using gimp?
[06:25] <Zack> #.#.39
[06:25] <Hirvinen_> SyckSyn: No, that's not the same since -u only overwrites when source is newer than destination.
[06:25] <SyckSyn> oh no, i'm not sure, asside from writing a perl script to check and cp based upon the results
[06:25] <BlueD> hold shift
[06:25] <SyckSyn> Ah, sorry Hirvinen.
[06:25] <Zack> but, when i just installed the newest version there are no menu buttons
[06:25] <cwatson> navets, use the pencil tool. click once to define the start position. then hold shift and click the end position
[06:26] <Zack> as if it werent there but when i go to synaptic it shows its installed
[06:26] <Hirvinen_> corhere: But I'm afraid that you'll have to do some script-fu for that one.
[06:26] <navets> cwatson: thanks alot :)
[06:26] <corhere> okay, sounds like fun
[06:26] <Hirvinen_> corhere: But what is it that you are trying to do? There might be tools already for that.
[06:26] <Zack> yknott?
[06:26] <SyckSyn> So, anyone have any suggestions for my grub problem?
[06:26] <BlueD> How can fill some space or something in Gimp with transparentsy?
[06:27] <cwatson> navets, no prob
[06:27] <corhere> copying a directory to my iPod (running RockBox) while also deleting files that are not in the source directory anymore
[06:27] <AusIan> New here, new to ubuntu, have a bit of Unix/C history, trying to get complex numbers working with gcc
[06:27] <Zack> Any ideas?
[06:27] <nj786> purpzey, when i click minimize on my windows it doesnt why si that?
[06:28] <PurpZeY> nj786: I don't follow.
[06:28] <Trixsey>  I'm trying to switch from OSS to ALSA in Feisty, any ideas on how to? (More info: http://www.mathbin.net/11586)
[06:28] <nj786> purpzey, like i am just trying to minimize my window and it wont neither it will close or expand
[06:28] <BlueD> How can i know reset Userl login options in terminal?
[06:29] <SyckSyn> After a recent reboot, grub fails with error 15.  The error persists through repeated attempts to reinstall grub with a live cd, as well as completely reinstalling Ubuntu (7.04).  Can anyone suggest a cause to the problem or a method of fixing it?
[06:29] <PurpZeY> nj786: Did you change the emerald theme?
[06:29] <nj786> yes
[06:29] <BlueD> SyckSyn, maybe your partition table is bad!
[06:29] <natbet> I try to mount /dev/mapper/via_fgfjbidfe to /media/linwin but it says mount: /dev/mapper/via_fgfjbidfe already mounted or /media/linwin/ busy, any ideas?
[06:30] <Zack> Wine isnt wrkin
[06:30] <Trixsey> ALSA ERROR:
[06:30] <Trixsey> audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink profile=music: Could not open resource for writing.  -> What is up with that?
[06:30] <SyckSyn> the drive has been reformated though...
[06:30] <PurpZeY> nj786: You may have changed to one that has weird functionality...Some of them are bizarre...I make sure to pick one I can control easily.
[06:30] <nj786> purpzey, ok
[06:30] <hatter> does anyone know howto enable mp3 encoding in ffmpeg ?
[06:30] <Markeda> Does GCC comes with everything needed to make executable C++ programs? (sorry if this is repeated, my connection coughed shortly after I sent it, and don't know if it got through or not or got answered)
[06:30] <BlueD> SyckSyn, try to check the table with some program, and then resintall Ubuntu
[06:31] <SyckSyn> mhmm... k, this would be the third time i've attempted reinstalling Ubuntu though
[06:31] <Zack> Wine crashes
[06:31] <PurpZeY> nj786: I like the slatehorn ones, I think they are easy to use...but if you don't need the "shade" or "stick" function another one might be better, and easier.
[06:31] <yknott> yes?
[06:31] <nj786> if i go 2 edit themes what happens and chose form the drop down button
[06:31] <SyckSyn> any suggestions on programs to check the partition table?
[06:31] <BlueD> SyckSyn, or remove all partitions, and then start again, like i did!
[06:31] <BlueD> Partition Magic
[06:31] <yknott> start wine in a terminal so you can see any output that it may generate
[06:31] <BlueD> Acronis True Image
[06:32] <SyckSyn> A full format would remove all the partitions, would it not? or does the ubuntu installer do something naughty when you tell it to format the entire drive?
[06:32] <Music_Shuffle> Full format removes all the partitions
[06:32] <BlueD> No it want do
[06:32] <PurpZeY> SyckSyn: It shouldn't.
[06:32] <illmortal> #beryl
[06:32] <BlueD> There labels
[06:33] <Zack> Could someone help me when there done? Please
[06:33] <SyckSyn> Zack, have you tried the wine support?
[06:33] <BlueD> SyckSyn, Just change disk label type in Gnome partitioner to dos, and it will ask you to clear all part. table!
[06:33] <Zack> Yes
[06:33] <Dr_willis> wine is not 100% reliable with everything.
[06:33] <Zack> nothing that i can find helps
[06:33] <Dr_willis> THats just how wine is.
[06:33] <SyckSyn> can do BlueD
[06:34] <BlueD> Yes with Counter!
[06:34] <Zack> But other people have had success at what im doing
[06:34] <Zack> i just dont know what they are doing different
[06:34] <BlueD> SyckSyn, not now, reboot first] 
[06:34] <SyckSyn> i havent tried it with starcraft in a long time, but it works with wc3... are you using opengl?
[06:34] <Dr_willis> Zack,  i would guess that the wine VERSION they are using may be different.
[06:34] <SyckSyn> Its a live CD, why reboot it first?
[06:34] <SyckSyn> the system is completely unbootable on its own at the moment
[06:35] <BlueD> O, sorry
[06:35] <corhere> does anybody know of directory synchronization software?
[06:35] <nj786> purpzey, and beryl doesnt slow down your system?
[06:35] <bluebanana> I have a DVD in my drive. Totem (movie player) is saying that I don't have the required plugins. What plugins do i need?
[06:35] <Dr_willis> !info rsync
[06:35] <ubotu> rsync: fast remote file copy program (like rcp). In component main, is standard. Version 2.6.9-3ubuntu1 (feisty), package size 254 kB, installed size 504 kB
[06:35] <Zack> I thought that and i have a different version then what other people i have seen, they have #.#.37
[06:35] <BlueD> SyckSyn go to source forge.net
[06:35] <Zack> But my computer will not install it for somereason
[06:35] <SyckSyn> ok
[06:35] <bluebanana> I've already installed libdvdcss2 but thoggen is saying that I probably still don't have it. help
[06:35] <BlueD> in the search box write> grub
[06:36] <BlueD> it will give you a package for grub menu editor
[06:36] <PurpZeY> nj786: Not as a whole, I mean, the animations are slow sometimes...I'll admit, but, they don't slow my system in total...It will eat some resources, but I don't find it is particularly bad, even on my laptop, which is not a graphical monster.
[06:36] <BlueD> and installer, plus a sourse code
[06:36] <nj786> purzpey, o k i am trying to install my printer how do  i do that?
[06:36] <PurpZeY> nj786: On my desktop it's as smooth as silk...Absolutely no slow down at all.
[06:37] <PurpZeY> !cups | nj786
[06:37] <ubotu> nj786: Printing in Ubuntu is done with CUPS. See https://help.ubuntu.com/community/Printers - https://wiki.ubuntu.com/HardwareSupportComponentsPrinters - http://linuxprinting.org - Printer sharing: https://wiki.ubuntu.com/NetworkPrintingFromWindows
[06:37] <nj786> purpzey, do you know anything about printers?
[06:37] <BlueD> Please help me with Users Login to reset it's options!
[06:38] <PurpZeY> nj786: I know you put paper in them and then text comes out.
[06:38] <PurpZeY> nj786: I mean, I know mine was quite easy to install and setup...If you have one that is supported, which most seem to be, it is no worries, as far as I can tell.
[06:39] <nj786> purpzey, i have a HP PHOTOSMART C3180 how do i install it?
[06:39] <BlueD> Why in all Ubuntu distributions there isn't any webcam program
[06:39] <PurpZeY> nj786: https://help.ubuntu.com/community/HpPrinterInstallationAndMaintenanceDapper
[06:39] <jota-> hey, how come ubuntu's bash doesnt have the "let" command?
[06:40] <tritium> jota-: it does
[06:40] <Zack> How do i install an older version of a application than what i already have
[06:40] <BlueD> There is forced installing, but that is not recommended
[06:41] <Zack> BlueD: how?
[06:41] <BlueD> i donot now
[06:41] <Zack> dang
[06:41] <BlueD> se man
[06:41] <CNTRLX> arang a tang tang..
[06:42] <BlueD> man install
[06:42] <eduhat> anyone know of some good games?
[06:42] <BlueD> man apt install
[06:42] <BlueD> Chess
[06:42] <tritium> BlueD: ???
[06:42] <jota-> tritium you know why I might be getting this error? ./tareaCal.sh: 25: let: not found
[06:42] <SyckSyn> k, going to try installing again after destroying partition table... its likely i'll be back
[06:42] <PurpZeY> eduhat: A lot of people like SuperTux
[06:42] <Dr_willis> eduhat,  depends on the kind of game also. :)
[06:42] <jota-> the script works fine on a slackware machine
[06:42] <eduhat> PurpZeY: why kind of game is SuperTux
[06:43] <tritium> jota-: what's the very first line?
[06:43] <eduhat> Dr_willis: well i like shooting games.
[06:43] <BlueD> I like puzzle hames
[06:43] <PurpZeY> eduhat: I've never played it, but I hear a it's like I mario.
[06:43] <CNTRLX> whats a good full on network administration program i can use
[06:43] <BlueD> with g
[06:43] <jota-> #!/bin/sh
[06:43] <jota-> should it be bash instead of sh?
[06:43] <tritium> jota-: that's why...sh != bash
[06:43] <Dr_willis> 'world of padman' 'tremulus' 'UrbanTerror4.0' (all stand alone/free fps using the Q3 source)
[06:43] <jota-> ok, thx a lot
[06:43] <eduhat> Dr_willis: can i just apt-get those games?
[06:43] <Zack> BlueD: i figured out how to force install, But how do i get that version that i need in syntax?
[06:44] <Dr_willis> eduhat,  dont think they are in the repos.
[06:44] <eduhat> Dr_willis: allright
[06:44] <BlueD> Dr_willis what the package name
[06:45] <Dr_willis> i got them off the "linux Game Tome" site
[06:45] <Dr_willis> well got the info/links there.
[06:45] <BlueD> I will kill my self, i'm forgeting to add "'s"
[06:45] <Dr_willis> Then theres good old RCTW:ET
[06:46] <numan> !vesa
[06:46] <ubotu> vesa is the default video driver if X can't find a better one. Also see !x
[06:46] <eduhat> Dr_willis: im trying out urban terror  4.0 seems pretty cool
[06:46] <Dr_willis> eduhat,  yea - thats one of the better games out at this time
[06:46] <numan> !x
[06:46] <ubotu> The X Window System is the part of your system that's responsible for graphical output. To restart your X, type  sudo /etc/init.d/?dm restart  in a console - To fix screen resolution or other X problems: http://help.ubuntu.com/community/FixVideoResolutionHowto
[06:46] <Dr_willis> eduhat,  WorldOfPadman is  neatly done also.
[06:46] <PurpZeY> Dr_willis: I was just looking at that myself...What kind of system-specs that take?
[06:47] <BlueD> Does anyone play The Sims2?
[06:47] <Linharex> !pico
[06:47] <ubotu> Sorry, I don't know anything about pico - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[06:47] <Dr_willis> PurpZeY,  they are all using Q3 engine. so anything that can handle Q3
[06:47] <Passa> with the NTFS-3G drivers, how can i REALLY delete something from the hard drive
[06:47] <Linharex> !vim
[06:47] <ubotu> Text Editors: gedit (GNOME), Kate (KDE), mousepad (Xfce4) | Terminal-based editors: vi/vim, emacs, and nano (user-friendly). | HTML/CSS editors: !html | Programming: !code
[06:47] <Passa> because it just moves it to .Trash-username
[06:47] <Linharex> very good :)
[06:47] <PurpZeY> Dr_willis: But it can run standalone?
[06:47] <Jordan_U> Passa, use rm ?
[06:47] <Dr_willis> Passa,  depends on your filemanager.
[06:47] <Passa> i use nautilius
[06:47] <Dr_willis> PurpZeY,  they are all 'stand alone' games now - they use the q3 source code/engine
[06:47] <Jordan_U> Passa, Or empty the trash?
[06:47] <Passa> it doesnt appear in the trash
[06:48] <Dr_willis> shift-delete deletes it directly i think
[06:48] <Linharex> !mac
[06:48] <ubotu> Sorry, I don't know anything about mac - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[06:48] <eduhat> Dr_willis: what is world of padman like? does it have to do with pac man by chance?
[06:48] <PurpZeY> Dr_willis: I am not trying to get on an off-topic branch, but, it looks like install requires Q3, am I missing something?
[06:48] <Linharex> !ddclient
[06:48] <ubotu> Sorry, I don't know anything about ddclient - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[06:48] <Linharex> !wget
[06:48] <ubotu> Sorry, I don't know anything about wget - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[06:48] <Linharex> !init
[06:48] <ubotu> Boot options: https://help.ubuntu.com/community/BootOptions - To add/remove startup services, you can use the package 'bum', or update-rc.d - To add your own startup scripts, use /etc/rc.local - See also !grub and !dualboot - Making a boot floppy: https://help.ubuntu.com/community/GrubHowto/BootFloppy - Also see https://help.ubuntu.com/community/SmartBootManagerHowto
[06:48] <PurpZeY> Dr_willis: Forget it, I found it.
[06:48] <Jordan_U> !botabuse | Linharex
[06:48] <ubotu> Linharex: Please investigate with me only in /msg or in #ubuntu-bots (see also !Bot). Abusing the channel bots will only result in angry ops...
[06:48] <tritium> Linharex: quit abusing the bots!
[06:49] <Linharex> ok
[06:49] <Jordan_U> Linharex, What is your question?
[06:49] <Dr_willis> !botsnack
[06:49] <ubotu> Yum! Err, I mean, APT!
[06:49] <Linharex> I need to know how to install dyndns client
[06:49] <Dr_willis> night all.
[06:49] <Linharex> any help?
[06:50] <tomex> Which is better for DVD ripping? DVDrip or Acidrip?
[06:50] <berent> can anyone give me something similar to limewire (a p2p client ) package in ubuntu
[06:50] <Frogzoo> is there a file system for file compression??
[06:50] <Linharex> Jordan_U, cound you help me?
[06:50] <BlueD> zip
[06:50] <BlueD> gzip
[06:50] <BlueD> zoo
[06:51] <BlueD> rar
[06:51] <Frogzoo> gzip is a file system?
[06:51] <BlueD> ups
[06:51] <eshaase> can someone please explain to me the differences between vim-full, vim-gnome and vim-gtk?
[06:51] <ubuntu__> Does anyone know if there's a way I can recover data from a drive that I reformatted?
[06:51] <Frogzoo> I want to mount a file system with compression on a loopback
[06:51] <kravlin> I used a program called Retriever 2000. It worked but it costs money.
[06:51] <BlueD> what it do?
[06:52] <Linharex> Jordan_U, any help?
[06:52] <Linharex> any help, Jordan_U?
[06:52] <BlueD> perchaps i could make you such program
[06:52] <Zack> OK How do i install an app that i saved to disk??
[06:52] <Jordan_U> Linharex, I don't use dyndns
[06:52] <Linharex> ok
[06:52] <Zack> Thats not .Deb
[06:52] <Linharex> :)
 What kind, is it make files or deb pack.
[06:53] <Zack> make files
[06:53] <BlueD> in terminal write, either .config
[06:53] <BlueD> then make install
[06:53] <Zack> .ok
[06:53] <cycom> Zack: usually there's a readme.  I'd try to find that before you do anything else, just in case the developer did something funky.
[06:53] <Jordan_U> Linharex, http://ubuntuguide.org/wiki/Ubuntu:Feisty#How_to_assign_Hostname_to_local_machine_with_dynamic_IP_using_free_DynDNS_service
[06:54] <cycom> BlueD: and you forgot to do just plain 'make' first.
[06:54] <BlueD> there must a file with the program named install, that is install help
[06:54] <Linharex> Thank you very much, Jordan_U
[06:54] <Linharex> I will
[06:54] <Linharex> That's greate
[06:54] <Linharex> great*
[06:55] <Jordan_U> Linharex, np :)
[06:55] <Zack> Blue D: what do you mean .config? you mean "sudo .config (file location)?
[06:55] <nj786> an anybody help me install my printer and find the right stuff for it i  have a HP PHOTOCMART C3180
[06:55] <nj786> photosmart**
[06:56] <BlueD> what ever, it is the same, just you get autoris.
[06:56] <Zack> BlueD:?
[06:57] <BlueD> I'm not fully awaked
[06:57] <bullgard4> lspci -vv prints: "0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRIV (ICH6 Family) SMBus Controller (rev 03)." Where are domain, bus, slot and func of man lspci defined?
[06:57] <Zack> How do i Configure the file in terminal?
[06:59] <Jordan_U> Zack, Are you sure that the program you want is not available from a repository or .deb?
[06:59] <BlueD> First go to the file in tereminal
[06:59] <gh0stid> sup sorry to bother you but i got 2 or 3 question ... my grub is messed up, and i need to install java so i can run a lcdfix java application :/ anyone could help ?
[06:59] <BlueD> cd program_path
[06:59] <Zack> No its not in Repository or deb
[06:59] <PWill_> I just had a soft lockup, but my machine has been online for 64 days, and I don't want to restart. Any ideas?
[07:00] <Jordan_U> gh0stid, In what way is grub messed up?
[07:00] <Jordan_U> !java | gh0stid
[07:00] <ubotu> gh0stid: To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository. Enable the backports repository on Edgy to install sun-java6-jre
[07:00] <Zack> when i go to the file in terminal it opens archive manager
[07:00] <gh0stid> Jordan_U: simple .. my windows partition doesnt boot at all :/ it say error starting up and block there ( proof it is pointing to linux partition )
[07:01] <shiester_miester> anybody know any docks that have similar functionality to kiba-dock but minus all the eye-candy and resource hogging?
[07:01] <Jordan_U> gh0stid, Is this a new problem or did it work before?
[07:01] <shiester_miester> and of course minus physics
[07:01] <gh0stid> till i installed ubuntu, it never worked. its only cause i dont know how hd(*,*) working :/ instead i would of fixed it ..
[07:01] <ubuntu__> Does anyone here know anything about recovering data from a disk after partitioning/???
[07:01] <Zack> How do i install a .tar.bz2 file??
[07:02] <gh0stid> Zack, bunzip
[07:02] <Zack> bunzip??
[07:02] <Zack> Ghostid:whats that?
[07:02] <gh0stid> bunzpi name.tar.bz2
[07:02] <Zack> ok
[07:02] <gh0stid> bunzip*
[07:02] <gh0stid> it will extract it
[07:02] <Jordan_U> gh0stid, Is it on the same drive as Ubuntu?
[07:02] <Zack> its a program?
[07:03] <Geoffrey2> nj786, if you have the manual for your printer, you could start by checking if it lists other printer models whose drivers will work with your printer....I'm not sure if they still provide lists like that these days, but it was always helpful in the past
[07:03] <gh0stid> jordan_u no, lemme explain you : i got 3 hard drive : MAIN one is : 160gig SATA ( windows XP ), second one is a SATA 400gig ( ubuntu ) third one is a ide 40gig ( backup )
[07:03] <navets> !svideo
[07:03] <ubotu> Sorry, I don't know anything about svideo - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[07:04] <Zack> ok so Whats Bunzip?
[07:04] <navets> !s-video
[07:04] <ubotu> Sorry, I don't know anything about s-video - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[07:04] <Jordan_U> gh0stid, Can you pastebin your /boot/grub/menu.lst ?
[07:04] <DShepherd> navets, you can msg the bot in private you know
[07:04] <gh0stid> sure would you give me a seconde please ?
[07:04] <Jordan_U> gh0stid, sure
[07:05] <gh0stid> Jordan_U:  here u go boss
[07:05] <gh0stid> http://www.pastebin.ca/575702
[07:05] <PurpZeY> How can I get a list of all the open instances of firefox or process, (gui or CLI) so I can kill them and restart Firefox?
[07:06] <Jordan_U> PurpZeY, killall firefox-bin
[07:06] <navets> DShepherd: didnt know
[07:06] <NemesisD> hi guys im thinking of building a remote backup machine with an old socket 754 box I have, should ubuntu be able to handle JBOD with different-sized disks well?
[07:06] <Jordan_U> PurpZeY, To kill them, ps aux | grep firefox-bin if you just want to find them
[07:06] <PurpZeY> Jordan_U: Got it, thanks...=)
[07:06] <DShepherd> navets, ok... /msg ubotu hi should get you going
[07:07] <Frogzoo> NemesisD: the ethernet is your limiting factor
[07:07] <berent> can anyone give me something similar to limewire (a p2p client ) package in ubuntu
[07:07] <gh0stid> Jordan_U: did u got it ?
[07:07] <Frogzoo> !frostwire
[07:07] <ubotu> frostwire is a totally open source version of Limewire.  For installation help, please see https://help.ubuntu.com/community/FrostWire
[07:07] <DShepherd> berent, yeah. frostwire..
[07:07] <Jordan_U> gh0stid, Yes
[07:07] <NemesisD> Frogzoo, whys that? I think the mobo has 10/100 ethernet built in
[07:07] <Jordan_U> berent, gtk-gnutella
[07:07] <Frogzoo> NemesisD: 100mbs is nothing to a pentium
[07:08] <berent> is it heavyweight . how much ram does it want
[07:08] <NemesisD> Frogzoo, i still should be able to send data pretty quick though right?
[07:08] <Frogzoo> NemesisD: 10Mbytes/sec isn't that fast
[07:09] <Jordan_U> gh0stid, Try (hd1,0)
[07:09] <gh0stid> on what ?
[07:09] <NemesisD> Frogzoo, ok well do they have faster PCI cards on the cheap (and I do mean cheap) as well as cheap scsi raid/jbod pci cards?
[07:09] <Jordan_U> gh0stid, root for Windows
[07:10] <gh0stid> would it help you if i gave you the result of fdisk -l?
[07:10] <Jordan_U> gh0stid, You can also try running this command to tell grub to look for alternate OS's again: sudo update-grub
[07:10] <RabidGoblin> does anyone know why games (enemy territory, which runs perfect on my computer usually) would run terribly (15 fps at some points) on ubuntu?
[07:11] <DShepherd> RabidGoblin, video drivers maybe..
[07:11] <cycom> RabidGoblin: because you set it up wrong :)
[07:11] <PurpZeY> RabidGoblin: Running beryl?
[07:11] <cycom> RabidGoblin: seriously though, what video card and such?
[07:11] <Jordan_U> RabidGoblin, Are they running in wine and / or do you have an ATI card?
[07:11] <DShepherd> Jordan_U, hehe.. ATI is always the problem :-)
[07:12] <bullgard4> English help wanted: What is the proper English name of the graphical Ubuntu 7.04 utility program gui-apt-key 'APT key management'?
[07:12] <NeoGeo64> Ok.... should I wipe VISTA and install UBUNTU ???
[07:12] <RabidGoblin> i have an ATI card (radeon x1600pro), just installed the driver off the site
[07:12] <holycow> NeoGeo64, if you are asking that question the answer is no
[07:12] <RabidGoblin> yeah my geforce never gave me problems
[07:12] <holycow> you will know when the time is right
[07:12] <W3ird_N3rd> RabidGoblin: don't, install it from synaptic
[07:12] <cycom> NeoGeo64: I did, but I know what I'm doing.
[07:13] <NeoGeo64> actually
[07:13] <NeoGeo64> im already on ubuntu
[07:13] <NeoGeo64> i meant
[07:13] <cycom> That's one of those things where you should suddenly notice that you haven't used Vista in several months.
[07:13] <NeoGeo64> should i wipe UBUNTU and install VISTA
[07:13] <holycow> same answer
[07:13] <PurpZeY> Just wipe thoroughly.
[07:13] <holycow> if you haveto ask the question then clearly no
[07:13] <PurpZeY> Whatever you do
[07:13] <Jordan_U> RabidGoblin, ATI's linux drivers are horrible, so much so that they are infamously hated for their poor linux support
[07:13] <cycom> lol@ PurpZeY
[07:13] <gh0stid> Jordan_U: thx for help, but it wont work :/
[07:14] <RabidGoblin> ahhh alright
[07:14] <RabidGoblin> purpZeY, whats beryl?
[07:14] <cycom> They did ok on my laptop, but I got tired of XGL.  So I called dell and threw a fit till they gave me an NVidia card for my laptop :)
[07:14] <Jordan_U> gh0stid, update-grub or (hd1,0) ?
[07:14] <PurpZeY> RabidGoblin: If you don't know what it is, you're not running it.
[07:14] <gh0stid> both of em
[07:14] <W3ird_N3rd> I've got Ubuntu 7.04, wine from repo and MS Word 2000. I can print perfectly from native linuxapps but I can't from Word, getting a Dutch printer-not-installed error
[07:14] <cycom> Dutch?
[07:14] <RabidGoblin> purpzey, ok wasn't sure if it would have been a cause of the problem or a solution
[07:15] <W3ird_N3rd> yes I'm Dutch and the Ubuntu and Word are also Dutch
[07:15] <NemesisD> so does anybody know if ubuntu would be able to work with JBOD with 3 drives of varying size?
[07:15] <gh0stid> Jordan_U: update-grub didnt change nothing except switchingmy ubuntu partiton to hd1.0 but it has to be at 0.0 so .. i dont understand ..
[07:15] <W3ird_N3rd> but you don't understand Dutch most likely so I translate it for you. I do see the printers name in Word, but it won't print. What can I do?
[07:16] <gh0stid> anyway to uinstall grub from my two MBR, and then reinstall it ?
[07:16] <gh0stid> cause i think the problem is : grubis messed up
[07:16] <RabidGoblin> alright, how would i install the ATI driver from synaptic?
[07:16] <Jordan_U> gh0stid, Run fixmbr from windows
[07:16] <gh0stid> but then ill have to reinstall ubuntu once again, not really what i look for ;/
[07:17] <Jordan_U> RabidGoblin, First remove the ones from ATI's site, then use System -> Administration -> Restricted Driver Manager
[07:17] <numan> i am having video driver problem?
[07:17] <xTaJMoX> gh0stid - in grub console try root (hd0,0)   then setup(hd0)
[07:18] <gh0stid> xTaJMoX: that command is suppose to .... ?
[07:18] <RabidGoblin> Jordan_U: oooh,k well i had that driver installed before, had the same problem, plus i couldn't switch screens with CTRL+ALT+F1
[07:18] <W3ird_N3rd> Jordan_U is right, if the driver somehow isn't there look in synaptic for fglrx
[07:18] <xTaJMoX> gh0stid : set grub for the first hard drive, first partition (if that's whaere your /boot is)
[07:19] <gh0stid> xTaJMoX:  may i explain you my situation in private ? it might be easier ..
[07:19] <nilweed> Hi, has anyone here built xserver-xgl from source on Feisty?
[07:19] <xTaJMoX> explain it here
[07:19] <Jordan_U> RabidGoblin, Just know that if installed from ati.com it will not update when you get a kernel upgrade, meaning some day you will get an update, restart, and X will fail
[07:19] <drowner> hi guys
[07:19] <drowner> can we talk about other distros?
[07:19] <numan> i am having video driver problem?
[07:19] <xTaJMoX> drowner : #Linux ?
[07:19] <numan> and using lilo bootloader instead of grub can anybody know how to boot in text mode?
[07:19] <holycow> drowner, no.
[07:20] <drowner> im there
[07:20] <Jordan_U> drowner, This is just a support channel, you might want #ubuntu-offtopic for talk in general
[07:20] <Jordan_U> numan, Why are you using lilo?
[07:20] <W3ird_N3rd> anybody some ideas for printing with wine? :)
[07:20] <numan> !lilo
[07:20] <ubotu> lilo is an alternative [Li] nux Boot[Lo] ader. Note: it is recommended that you use GRUB on Ubuntu instead.
[07:21] <Sg_Precog> i keep failing to install drivers nvidia-glx-new for my Nvidia Geforce 8800 GTS with ubuntu, ive tried using envy script and automation script
[07:21] <Tom47> W3ird_N3rd: #winehq ??
[07:21] <Jordan_U> numan, I know what lilo is, why are you using it?
[07:21] <Sg_Precog> anyone want to PM me and try and help?
[07:21] <`eric-> !8800
[07:21] <ubotu> Sorry, I don't know anything about 8800 - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[07:21] <numan> i just tried it but it sucks
[07:21] <`eric-> !nvidia
[07:21] <ubotu> To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto
[07:21] <W3ird_N3rd> Tom47: good one.. I actually don't know if my problem has to do with Wine or Ubuntu or the driver or whoknowswhat
[07:22] <Sg_Precog> thanks for the links
[07:22] <Tom47> !private | Sg_Precog
[07:22] <ubotu> Sg_Precog: Please ask your questions in the channel so that other people can also benefit. Please don't PM a user in the channel without asking first, some find it rude.
[07:22] <nilweed> question: anyone know how to get netbeans5.5 to work with Xgl (without patching xserver-xgl)?
[07:22] <RabidGoblin> Jordan_U: so theres no way to make my game run at a regular speed with this card?
[07:22] <gh0stid> xTaJMoX: as u wish : FIRST OF ALL : bios setup :: first HD 400gig ( installed ubuntu on it ) second HD 160gig ( windows on it ) and used to be first HD at first try on installing ubuntu it installed GRUB on my 160gig hardrive ( wich is the windows one ) but ive installed ubuntu on my 400gig, once the installation was done it coudlnt boot anymore, saying grub error 22. then i installed it again, and used another dev as grub install path, it would boot
[07:22] <gh0stid> the linux partition but not the windows one ..
[07:22] <Jordan_U> Sg_Precog, if you install the same thing in different ways without uninstalling in between it could screw things up
[07:22] <Sg_Precog> roger that ubotu
[07:23] <vap> Anyone have success in building GCC compiler in Ubuntu linux?
[07:23] <numan> jordan: how to install grub boot loader?
[07:23] <Sg_Precog> yea, i dont know comman commands for console so i have a hard time doing stuff
[07:23] <Jordan_U> RabidGoblin, Probably not, short of changing the quality obviously, and this is a native game right? not a windows game running in wine?
[07:23] <`eric-> !apt
[07:23] <ubotu> APT is the Advanced Package Tool, which together with dpkg forms the basic Ubuntu package management toolkit. Short apt-get manual: https://help.ubuntu.com/community/AptGetHowto - Also see !Synaptic (Gnome) or !Adept (KDE)
[07:23] <RabidGoblin> jordan_u, yeah its native
[07:23] <drowner> hi everyone
[07:24] <Jordan_U> !hi | drowner
[07:24] <ubotu> drowner: Hi! Welcome to #ubuntu!
[07:25] <xTaJMoX> gh0stid - does your /boot/grub/menu.lst tell to boot ubuntu as hda1 ?
[07:25] <xTaJMoX> gh0stid - go into the live cd - terminal - grub - root (hd0,0) - setup (hd0)     try that
[07:25] <gh0stid> nop it tell to boot ubuntu as : hd(0.1) ( it has to be on hd0.0 instead it doesnt boot )
[07:25] <Tom47> Sg_Precog: google is good ... but here for a starter is a cheat sheet http://www.pixelbeat.org/cmdline.html
[07:25] <Frogzoo> vap: do you really need to build gcc ?
[07:26] <kravlin> what's the name of the partitioning utility in Ubuntu?
[07:26] <Sg_Precog> thank you
[07:26] <gh0stid> xTaJMoX: i cant do it if im on ubuntu ? i have absolutly to run live cd ?
[07:26] <xTaJMoX> gh0stid : oh, i thought you cant get to your ubuntu
[07:26] <Zack> OK After i Extract a file how do i Run "./configure"? Baby steps
[07:26] <Frogzoo> kravlin: gparted (gui) fdisk (cli)
[07:26] <thejapanesegeek> I have a problem. I just installed ubuntu to an External USB HD, and now windows won't boot normally.
[07:26] <gh0stid> no i can get to my ubuntu, if i switch hd1.0 to hd0.0 but my windows doesnt boot
[07:27] <Tom47> Sg_Precog: i find ubuntuguide a handy resource as well but you mileage may vary
[07:27] <vap> Frogzoo Yes. I would like to build GCC native, to get the hang of building the compiler, and then build a cross-compiler for PPC-604 to study optimization source code.
[07:27] <xTaJMoX> gh0stid - ok then you will have to edit your /etc/fstab and /boot/grub/menu.lst to tell it the changes
[07:27] <n2diy> Zack: open a terminal, and type ./configure in the directory where the program was extracted to
[07:28] <gh0stid> xTaJMoX: sorry to ask, but could you please explain me how ?
[07:28] <Frogzoo> vap: apt-get source gcc-4.1
[07:28] <xTaJMoX> gh0stid : just open those in a text editor - it should be self explanatory
[07:28] <xTaJMoX> gh0stid : and you have to use sudo to edit them
[07:28] <Jordan_U> !compile | Zack
[07:28] <ubotu> Zack: Compiling software from source? Read the tips at https://help.ubuntu.com/community/CompilingSoftware (But remember to search for pre-built !packages first: not all !repositories are enabled by default!)
[07:28] <kravlin> another question. If i want to allocate empty space to a new partition how would i go about finding out what parts are free and which arent?
[07:29] <vap> Frogzoo Thanks, I'll try gcc-4.1
[07:29] <n2diy> kravlin: df -h?
[07:29] <thejapanesegeek> Can anyone help me?
[07:29] <gh0stid> xTaJMoX: hum .. fstab mean nothing to me :/ . im not good enought with the /dev method :/
[07:29] <Zack> Ok to all
[07:29] <xTaJMoX> thejapanesegeek you might have to use system restore on windows
[07:29] <DShepherd> gparted works if you want nice visual kravlin
[07:30] <gh0stid> xTaJMoX: ill do something easier.. just a sec
[07:30] <kravlin> n2diy : Yes. but doesn't it fragment files like windows?
[07:30] <Zack> In the terminal it says No such file or directory
[07:30] <kravlin> i don't want to loose any of the info i have.
[07:30] <xTaJMoX> gh0stid : fstab tells your mount points... so for / you should change it to /dev/hdb1
[07:30] <n2diy> kravlin: every night cron run fsck, essentially it defrags every night, so your cool with that.
[07:31] <n2diy> run/runs
[07:31] <`eric-> vim or emacs?
[07:31] <Zack> It keeps saying NO SUCH FILE
[07:32] <gh0stid> xTaJMoX: look at that, maybe it will give you more detail about the situation , its a complete menu.lst fstab and result of fdisk -l
[07:32] <kravlin> so if i were to run fdisk right now it would defrag my harddrive?
[07:32] <xTaJMoX> gh0stid look at what
[07:32] <gh0stid> http://www.pastebin.ca/575715
[07:33] <Zack> Excuse me, When i typed ./config it showed "No such file or directory"
[07:33] <gh0stid> ./Config maybe ?
[07:33] <holycow> kravlin, *hint* there is NO defrag on linux *hint*
[07:34] <Zack> nope
[07:34] <Zack> not ./Config
[07:34] <kravlin> got it.
[07:34] <Tom47> Zack were you in the exact same directory
[07:34] <bruenig> Zack, do ls and see if there is a file called config
[07:34] <barbarianhero> is there a way to make dns lookups go faster?
[07:34] <Zack> no there isnt a file called config
[07:34] <kravlin> ok. then how do i create a partition?
[07:35] <Teknine> Hello, I'm new to ubuntu, and am curious if there is a safe way to upgrade to feisty fawn, without having to burn it to an iso image. Also if feisty fawn is stable? anyone help me please
[07:35] <Quiz> gpatred
[07:35] <gh0stid> barbarianhero: change the timeout in resolv.h and maybe change the nameserver
[07:35] <barbarianhero> firefox and ssh is so slow...always waiting for the hostname lookup thru dns
[07:35] <bruenig> Zack, ok what is there? any directories that look interesting?
[07:35] <holycow> kravlin, cfdisk
[07:35] <n2diy> barbarianhero: yes, disable your dns server, and let your isp handle it.
[07:35] <barbarianhero> gh0stid: ok ill check that out
[07:35] <barbarianhero> n2diy: how do you disable local dns server?
[07:35] <holycow> or gparted
[07:35] <holycow> or qtparted
[07:35] <Zack> Just my Docs
[07:35] <barbarianhero> n2diy: I didn't know it set one up
[07:35] <holycow> or about a billion other tools
[07:35] <barbarianhero> n2diy: just did a fresh fiesty install
[07:35] <Zack> And the Folder i am trying to install
[07:36] <Tom47> Zack locate the directory that that file is in, make it yr present working direcory and submit the command again
[07:36] <Zack> ok
[07:36] <kravlin> holycow : i get cannot open disk...
[07:36] <Tom47> buenig sorry leave it to you
[07:36] <bruenig> Zack, ok do "cd folder you are trying to install"
[07:36] <Bassetts> does anyone know how I can remove the hidden partition on my HDD that is not in fstab from Places>Computer
[07:36] <bruenig> I don't care
[07:36] <Jordan_U> Teknine, Yes, Feisty fawn is stable, what are you upgrading from?
[07:36] <bruenig> Bassetts, that is probably not going to happen, it is gnome after all
[07:37] <Bassetts> bruenig, ??
[07:37] <Zack> I did the cd and i did ./config while i was in the folder i am trying to install, still no progress
[07:37] <n2diy> ! dns
[07:37] <ubotu> Sorry, I don't know anything about dns - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[07:37] <n2diy> ! info dns
[07:37] <ubotu> Package dns does not exist in feisty, feisty-seveas
[07:37] <Teknine> Jordan_U: edgy 6.10
[07:37] <bruenig> Bassetts, the philosophy of gnome is to not allow such small configurations, they believe it to confuse users I guess
[07:37] <holycow> kravlin, all utilities requiring admin priviledges, oh say like creating partitions, need to be run as sudo
[07:37] <holycow> !sudo
[07:37] <ubotu> sudo is a command to run programs with superuser privileges ("root"). Look at https://help.ubuntu.com/community/RootSudo for all information.
[07:37] <Teknine> Jordan_U: could you assist me on upgrading?
[07:37] <kravlin> holycow : true.
[07:37] <Zack> !install wine
[07:37] <ubotu> Sorry, I don't know anything about install wine - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[07:37] <Jordan_U> Teknine, You should be able to just open System -> Administration -> Update Manager
[07:38] <Zack> This is not working
[07:38] <Quiz> sudo apt-get install wine
[07:38] <bruenig> Zack, do you understand even what cd ls and all of that is doing or are you just copying and pasting
[07:38] <khin> hi, im trying to use rhythmbox music player but whenever i try to import an mp3 file it says error, this file is not an audio stream
[07:38] <Teknine> Jordan_U: I heard it's not efficient doing it that way, it's best to burn to an image and install? is there really a difference?
[07:38] <Zack> I know what its doing, its changing my directory folder
[07:38] <Zack> from home, root, ect
[07:38] <bruenig> Zack, right but when you do ./config you understand that?
[07:39] <illmortal> Can someone help me out? I want to get applets exactly like these on this desktop.. including the weather: http://gnomelook.org/content/preview.php?preview=3&id=59906&file1=59906-1.jpg&file2=59906-2.jpg&file3=59906-3.jpg&name=Murrina-LiNsta+%28LiNsta+is+Not+Vista+%3B-%29
[07:39] <barbarianhero> n2diy: ok nevermind, it configured my local box and my router as a nameserver before my ISP, so i just put the ISP first and it works quickly now
[07:39] <Zack> its to configure the folder for install..
[07:39] <n2diy> barbarianhero: here on Dapper it is in system > admin > networking > dns, and then you enter your ISPs ip addresses.
[07:39] <Quiz> illmortal, gdesklets
[07:39] <Jordan_U> Teknine, Some people prefer to do a fresh install, I never do though
[07:39] <bruenig> illmortal, those look like gdesklets
[07:39] <n2diy> barbarianhero: bingo, :)
[07:39] <illmortal> yeah! that's what my friend called them... just apt-get install gdesklets?
[07:39] <Quiz> try...
[07:39] <Zack> is that right?
[07:39] <Teknine> Jordan_U: is there any good FTP, and web developing tools for Ubuntu, This is my first time on it :P
[07:39] <kravlin> holycow: I'm trying to resize my / partition. It doesn't like it.
[07:40] <newuser2> ubuntu
[07:40] <bruenig> Zack, no, . means current directory so ./config would run a file in the current directory called config
[07:40] <kravlin> probably because i'm using it.
[07:40] <Zack> ok gotcha
[07:40] <bruenig> Zack, for instance, if you were in home, ./Desktop would be the path to the Desktop
[07:40] <holycow> kravlin, you said 'create' partition not 'resize partition'
[07:40] <kravlin> sorry.
[07:40] <gh0stid> hey sorry to bother you, got a quick question lol .. why each time i reboot i gotta reclick on my "network" utility to reactivate the network card, and THEN finaly got access to internet ? anyway to fix that ?
[07:40] <bruenig> Zack, so make sure that file is there before you try to do it
[07:40] <holycow> kravlin, with that being said, i hope you have your data back
[07:40] <illmortal> woohoo thanks Quiz!... brb!
[07:40] <Zack> ok
[07:40] <kravlin> i didn't do anything yet holycow'
[07:40] <Quiz> np
[07:41] <Jordan_U> Teknine, Nautilus ( the default file manager ) supports FTP AFIK, for web development try bluefish
[07:41] <holycow> kravlin, right now i'm too drunk to run you through it, i kinda pointed you in a few directions that are correct you will haveto google the rest i'm afraid
[07:41] <Teknine> gh0stid: from RSCN?
[07:41] <kravlin> thats cool. maybe possibly someone else has an idea in this channel.
[07:41] <gh0stid> Teknine: RSCN ?
[07:41] <kravlin> enjoy the hangover tomorrow.
[07:41] <holycow> i don't get hangovers
[07:41] <bluebanana> i'm a newbie, and i've just installed mplayer. I have dvd in disc drive. How can I: 1) view DVD (with mouse acting as pointer thingy) 2)rip dvd onto my hard drive for later viewing?
[07:41] <holycow> i can drink to infinity basically
[07:41] <n2diy> holycow: cheers! :)
[07:41] <holycow> :)
[07:41] <Teknine> runescape cheat net, long time ago
[07:41] <kravlin> that must be nice.
[07:41] <Zack> Ok so now i know that, how would i go about it
[07:41] <gh0stid> Teknine: nop sorry :/
[07:41] <holycow> hehe :)
[07:42] <holycow> its a miracle i can still type
[07:42] <bruenig> Zack, I don't even know what you are doing
[07:42] <Jordan_U> holycow, Doesn't mean you should...
[07:42] <holycow> n2diy, *ding* right back at ya
[07:42] <Teknine> Jordan_U: thanks, alot.
[07:42] <Zack> I am installing Wine from my Home Folder
[07:42] <holycow> Jordan_U, indeed, heh
[07:42] <bruenig> Zack, why not install it from the repo?
[07:42] <gh0stid> gh0stid as in : i = - D = DePotedon so .. it mean the ghost of DePotEdon
[07:42] <n2diy> How can I tell Nautilus _not_ to abbreviate files sizes?
[07:42] <bluebanana> I do i find out my processor speed and how much ram i have?
[07:42] <Quiz> killall nautilus
[07:42] <Quiz> :D
[07:43] <n2diy> bluebanana: lshw
[07:43] <Zack> Because they only have the current version and i need the one before it
[07:43] <Jordan_U> bluebanana, cat /proc/cpuinfo
[07:43] <kravlin> does anyone other than Holycow know how to resize a partition? I Need to free space from my / partition.
[07:43] <gh0stid> hey sorry to bother you, got a quick question lol .. why each time i reboot i gotta reclick on my "network" utility to reactivate the network card, and THEN finaly got access to internet ? anyway to fix that ?
[07:43] <Bassetts> how do I run .jar files
[07:43] <kravlin> .jar means java
[07:43] <illmortal> I have one more question! This link explains how to install the the vista look-a-like panel... but I'm having a hard time with the gconf-editor: http://gnomelook.org/content/show.php/Vista-Panel?content=60077
[07:43] <bluebanana> n2diy, that's a lot of info
[07:43] <bruenig> Zack, oh, ok so cd into the wine directory and run ./configure
[07:43] <kravlin> bassetts : where did you get the .jar file?
[07:44] <bluebanana> Jordan_U, that's great. Thanks!
[07:44] <kravlin> does anyone other than Holycow know how to resize a partition? I Need to free space from my / partition.
[07:44] <Bassetts> kravlin, its a program called buddi, i downloaded it and it just gave me a .jar
[07:44] <n2diy> gh0stid: the answer lies with init.d, I believe, check the man page.
[07:44] <bluebanana> Jordan_U, where is my ram info?
[07:44] <n2diy> bluebanana: you asked for it. :)
[07:44] <Zack> But i did
[07:44] <Teknine> Jordan_U: can't really game on ubuntu without wine?
[07:45] <Zack> Then i ./config and it says there is no such thing
[07:45] <bluebanana> how do i find out how much RAM i have?
[07:45] <Jordan_U> Teknine, There are some good native games, but I am not a gamer myself
[07:45] <talon223> can't really game on ubuntu period...as far as really good games...but we have some nice flight simulators, and a couple good fps's
[07:45] <n2diy> bluebanana: top
[07:45] <bruenig> Zack, after you do ./configure, if it doesn't error, you do make and then sudo make install
[07:45] <talon223> not as intensive as windows games..but good and addictive
[07:45] <Zack> ok
[07:45] <talon223> what they lack in graphics tehy make up for in playability
[07:45] <Zack> bud it does
[07:46] <Zack> but
[07:46] <n2diy> bluebanana: lot of info there, look at the top lines.
[07:46] <Jordan_U> bluebanana, free -m
[07:46] <Teknine> I only play wow hehe.
[07:46] <holycow> speaking of games, time for supertux
[07:46] <gh0stid> xTaJMoX: as u wish : FIRST OF ALL : bios setup :: first HD 400gig ( installed ubuntu on it ) second HD 160gig ( windows on it ) and used to be first HD at first try on installing ubuntu it installed GRUB on my 160gig hardrive ( wich is the windows one ) but ive installed ubuntu on my 400gig, once the installation was done it coudlnt boot anymore, saying grub error 22. then i installed it again, and used another dev as grub install path, it would boot
[07:46] <gh0stid> the linux partition but not the windows one ..  anyone could help ?
[07:46] <talon223> teknine, that's not my fault. you have an addiction and you need help
[07:46] <ccxxpro> i dont have the window XP CD
[07:46] <kravlin> Bassetts : have you tried to run the jar file from a console?
[07:47] <kravlin> does anyone other than Holycow know how to resize a partition? I Need to free space from my / partition.\
[07:47] <ccxxpro> i'd like to remove the Grub and replace by the MBR
[07:47] <Bassetts> how can i find out why my wireless disconnects after a good few hours? I has never happened when I am using the system, but when I leave it running over night i come back to it and theres no connection
[07:47] <eshaase> how do i get gnome to prompt with ssh-askpass after i login?
[07:47] <talon223> if you're on gnome then load up gparted
[07:47] <ccxxpro> anyone can help me with that ?
[07:47] <Bassetts> kravlin, i just found it "java -jar *.jar"
[07:47] <bruenig> ccxxpro, if you don't have the windowsxp cd, I don't think you will be able to, certainly not within linux
[07:47] <talon223> actually..load it on either..doesn't get any easier
[07:47] <Teknine> talon223: I never said anything to you... and I'm not addicted..
[07:47] <bruenig> ccxxpro, maybe there is some way to do it within windows but that would be a question for ##windows
[07:47] <kravlin> yeah... Thats what it is...
[07:48] <talon223> teknine, take a joke. :)
[07:48] <cormarrr> in gpart I am trying to combine 2 ext3 partitions, any help?
[07:48] <Jordan_U> bruenig, Actually there is a package in the repos to do it, couldn't figure it out myself when trying to help someone with the same problem
[07:48] <Teknine> can't I'm tired :(
[07:48] <Teknine> lol
[07:48] <`eric-> ccxxpro: boot up using winxp cd into recovery mode and type: fixmbr
[07:48] <bruenig> `eric-, just said he didn't have the cd
[07:48] <`eric-> opps, missed that :P
[07:49] <kravlin> Bassetts : You need to install a java Virtual machine Emulator
[07:49] <ccxxpro> the problem is i dont have window XP CD
[07:49] <ccxxpro> i just have the Recovery CD
[07:49] <ccxxpro> from My Asus Laptop
[07:49] <byonix> i have downloaded installjammer, software to make automatic installer like in windows, but in feisty no application available to install it, how do i install it?
[07:49] <Bassetts> kravlin, i have the latest java, it works, i just had no idea how to launch it
[07:49] <kravlin> ah.
[07:49] <Jordan_U> bruenig, If you are better at reading man pages than I the package is ms-sys
[07:49] <bruenig> ccxxpro, yeah that won't work. I hate when they do that garbage, I actually told them to not do that and to give me a real one then they didn't
[07:50] <bruenig> luckily I have since formatted the whole thing and am pure linux
[07:50] <ccxxpro> haha
[07:50] <bruenig> Jordan_U, no ubuntu here
[07:50] <holycow> ccxxpro, that should be enough to get your system back to factory specs
[07:50] <gh0stid> FIRST OF ALL : bios setup :: first HD 400gig ( installed ubuntu on it ) second HD 160gig ( windows on it ) and used to be first HD at first try on installing ubuntu it installed GRUB on my 160gig hardrive ( wich is the windows one ) but ive installed ubuntu on my 400gig, once the installation was done it coudlnt boot anymore, saying grub error 22. then i installed it again, and used another dev (obviously the 400gig ) as grub install path, it would bo
[07:50] <gh0stid> ot the linux partition but not the windows one ..  anyone could help ? please.. heres the result of my menu.lst /fstab and fdisk -l http://www.pastebin.ca/575715
[07:50] <cormarrr> how can I combine 2 ext3 partitions with gpart (or any other tool)?
[07:50] <Geoffrey2> hopefully one day I can go pure Linux, but that day doesn't seem to be here yet
[07:51] <ccxxpro> grub error 22
[07:51] <ccxxpro> haha
[07:51] <bruenig> cormarrr, delete the one on the end and resize the other one
[07:51] <`eric-> i have xp only for dod:s :/
[07:51] <LevinX> have any chinese?
[07:51] <ccxxpro> i need XP for gaming
[07:51] <cormarrr> bruenig, the one on the end is my root partition, sda4. I need to add sda3 to 4
[07:51] <`eric-> same. :/
[07:51] <Bassetts> ok, can I stop roaming mode and just use one network? There is only an option for WEP in the network settings but in "Connect to another wireless network" it has an option for WPA
[07:52] <holycow> ccxxpro, you want to wipe out everything reinstall xp on one partition clean
[07:52] <bruenig> won't happen, in fact you can't even resize 4, because you can't add space to the beginning of a partition without formatting it
[07:52] <byonix> i have install X-chat Gnome, but when i receive DCC file, the file transfers does not move at all
[07:52] <ccxxpro> yep
[07:52] <holycow> ccxxpro, then install ubuntu and grub afterwards on the remaining partition scheme
[07:52] <bruenig> cormarrr, you can move the files from 3 to 4 but not the disk space
[07:52] <`eric-> byonix: make sure you have your ports setup correct
[07:52] <talon223> if bungie doesn't support linux, i don't support bungie...
[07:52] <holycow> grub will automagically be donfigured to find it
[07:52] <talon223> that's the mentality you have to have
[07:52] <kravlin> bassetts. Im getting a java machine now. ill try and help you figure it out.
[07:52] <Bassetts> kravlin, that problem is sorted
[07:53] <kravlin> oh.
[07:53] <Bassetts> thanks =)
[07:53] <holycow> talon223, i agree 100%
[07:53] <kravlin> what's the other one you're having?
[07:53] <Bassetts> i need to sort my WPA problem out now
[07:53] <`eric-> !private | LevinX
[07:53] <ubotu> LevinX: Please ask your questions in the channel so that other people can also benefit. Please don't PM a user in the channel without asking first, some find it rude.
[07:53] <Bassetts> in network manager theres only WEP
[07:53] <cormarrr> bruenig, k, guess I am screwed, thanks anyway!
[07:53] <byonix> eric:what do you mean?
[07:53] <kravlin> ah. so you have internet problems?
[07:53] <Bassetts> kravlin, i want to disable roaming mode so ubuntu automatically uses my wireless
[07:53] <`eric-> byonix: check xchat settings for which port it uses, then make sure your router is forwarding that to your PC's networked IP address
[07:54] <kravlin> Did you unmark it in the gui?
[07:54] <LevinX> i have a big problems
[07:54] <Bassetts> at the minute if it looses connection it does not reconnect kravlin
[07:54] <`eric-> !question
[07:54] <ubotu> Don't ask to ask a question. Just ask your question :)
[07:54] <Bassetts> kravlin, well in network manager theres only the option for WEP, i use WPA
[07:54] <LevinX> yes
[07:54] <Geoffrey2> if Firefox is showing two different plugins for the same media type, could that present a problem?
[07:55] <gh0stid> FIRST OF ALL : bios setup :: first HD 400gig ( installed ubuntu on it ) second HD 160gig ( windows on it ) and used to be first HD at first try on installing ubuntu it installed GRUB on my 160gig hardrive ( wich is the windows one ) but ive installed ubuntu on my 400gig, once the installation was done it coudlnt boot anymore, saying grub error 22. then i installed it again, and used another dev (obviously the 400gig ) as grub install path, it would bo
[07:55] <gh0stid> ot the linux partition but not the windows one ..  anyone could help ? please.. heres the result of my menu.lst /fstab and fdisk -l http://www.pastebin.ca/575715
[07:55] <LevinX> i want setup 7.04 form the HD,
[07:55] <n2diy> How can I tell Nautilus _not_ to abbreviate files sizes?
[07:55] <`eric-> LevinX: i think the only way is through CD, unless someone else knows any different?
[07:56] <byonix> 'eric:i can't find what you mean in the menus
[07:56] <LevinX> i don't have the CDROM device
[07:56] <ccxxpro> dual boot problem , pls help
[07:56] <kravlin> Sorry Bassetts : I am not a big help with Wireless networking. My friend was having issues and instead i just installed wicd (An alternative network driver) which worked. I would ask without using my name.... Might get you more responses.
[07:56] <bobsomebody> did you look in the gconf-edit options
[07:56] <kravlin> does anyone other than Holycow know how to resize a partition? I Need to free space from my / partition.
[07:56] <rabidweezle> who's having wireless problems?
[07:57] <LevinX> my thinkpad is T43P,
[07:57] <kravlin> bassetts
[07:57] <Bassetts> ok
[07:57] <Bassetts> Thanks kravlin
[07:57] <ccxxpro> when i choose booting vista from the grub menu , instead of booting it reboot my laptop
[07:57] <rabidweezle> Bassetts, what encryption?
[07:57] <Bassetts> rabidweezle, WPA
[07:57] <bobsomebody> ccxxpro: your labtop is the new "smart" ones, they wont boot crap-ware
[07:57] <ccxxpro> hehe
[07:57] <kravlin> does anyone other than Holycow know how to resize a partition? I Need to free space from my / partition.
[07:57] <rabidweezle> you can't change it to wep bassets?
[07:57] <illmortal> Hey guys, I just downloaded adesklets through apt-get install, and after installation, I type adesklets again into terminal and it doesn't load up an applet of any sort, can anyone help me?
[07:58] <Bassetts> rabidweezle, i just want roaming mode off so ubuntu will auto connect to my wirless if it looses connection
[07:58] <bobsomebody> kravlin: i do
[07:58] <Bassetts> rabidweezle, not an option
[07:58] <ccxxpro> serious man
[07:58] <rabidweezle> ooh
[07:58] <rabidweezle> at work or something?
[07:58] <rabidweezle> ooh
[07:58] <kravlin> bobsomebody : Could you walk me through it?
[07:58] <bobsomebody> kravlin: sure
[07:58] <rabidweezle> you can shut off roaming mode Bassetts in the networking
[07:58] <`eric-> byonix: In the preferneces there's a setting for Network -> File Transfers -> Ports... which should be est to 0.. you may want to change those to something like 2295 (or some random port) and forward that port in your router
[07:58] <bobsomebody> are you on desktop or server?
[07:58] <rabidweezle> it's a little checkbox there...
[07:58] <Bassetts> rabidweezle, but then it only lets me use WEP
[07:58] <rabidweezle> ooh
[07:59] <ccxxpro> vista and ubuntu in one HD and diff partition
[07:59] <rabidweezle> you at work or something?
[07:59] <ccxxpro> any ideal
[07:59] <`eric-> byonix: but odn't set the port if you don't forward that port in your router
[07:59] <ccxxpro> what should i do now
[07:59] <rabidweezle> Bassetts, lemme look it up on the wiki, there might be a way to do it
[07:59] <bobsomebody> kravlin: desktop or server?
[07:59] <cabbie> bluebanana: also try cat /proc/meminfo
[07:59] <Bassetts> rabidweezle, i looking there but dont get it
[07:59] <gh0stid> FIRST OF ALL : bios setup :: first HD 400gig ( installed ubuntu on it ) second HD 160gig ( windows on it ) and used to be first HD at first try on installing ubuntu it installed GRUB on my 160gig hardrive ( wich is the windows one ) but ive installed ubuntu on my 400gig, once the installation was done it coudlnt boot anymore, saying grub error 22. then i installed it again, and used another dev (obviously the 400gig ) as grub install path, it would bo
[07:59] <gh0stid> ot the linux partition but not the windows one ..  anyone could help ? please.. heres the result of my menu.lst /fstab and fdisk -l http://www.pastebin.ca/575715
[07:59] <bobsomebody> kravlin: I only know how to do it in terminal
[08:00] <rabidweezle> Bassetts, https://help.ubuntu.com/community/WifiDocs/WPAHowTo?highlight=%28wpa%29
[08:00] <rabidweezle> there's a wpa howto
[08:00] <kravlin> bobsomebody : desktop. I want to make my system dual boot windows and ubuntu
[08:00] <bobsomebody> ok
[08:00] <talon223> i just picked up an old dell optiplex gx50(small form factor) and I am going to run Xubuntu on it as a central network storage/server type thing/machine...any ideas on what open source stuff to run on it?
[08:00] <ccxxpro> 1st partition : recovery , 2rd : vista , 3rd : ubuntu
[08:00] <Bassetts> reading that rabidweezle but all I can see is the way i have it setup
[08:00] <rabidweezle> Bassetts, did you read that?
[08:00] <bobsomebody> how many drives? and how many partitions already on each one?
[08:00] <ccxxpro> and grub killed MBR already
[08:01] <bobsomebody> which windows?
[08:01] <ccxxpro> i wanna my MBR back
[08:01] <bobsomebody> and why not use synergy + another computer?
[08:01] <ccxxpro> i dont have XP , Vista CD ; just the recovery CD
[08:01] <rabidweezle> Bassetts, check your card on http://hostap.epitest.fi/wpa_supplicant/
[08:01] <kravlin> I don't know how.
[08:01] <bobsomebody> ok...
[08:01] <kravlin> but its more because this is my computer...
[08:02] <kravlin> and i don't own another.
[08:02] <kravlin> I only have one drive.
[08:02] <kravlin> its got the swap etc all on it.
[08:02] <Bassetts> rabidweezle, i think this is the problem:  Apparently when Network Manager scans for APs, wpa_supplicant will disconnect
[08:02] <bobsomebody> kravlin: ok, you might have a problem then
[08:02] <rabidweezle> ouch
[08:02] <rabidweezle> that's no good
[08:02] <kravlin> I need to run windows because gaming is harder on linux. plus its a pain to get multiplayer working.
[08:02] <bobsomebody> kravlin: i would not trust working on a live disk/filesystem im not that good
[08:03] <gh0stid> ccxxpro: go download ultimate boot disk for windows ( search on google ) it has a windows recovery consol, once in the recovery console, type fixmbr, and reboot
[08:03] <kravlin> ok.
[08:03] <bobsomebody> kravlin: wine, have you tryed it?
[08:03] <kravlin> yeah./
[08:03] <ccxxpro> thanx
[08:03] <bobsomebody> let me guess, WoW?
[08:03] <gh0stid> ccxxpro: anytime
[08:03] <kravlin> its full of bugs.
[08:03] <kravlin> nope.
[08:03] <rabidweezle> Bassetts, lemme check the forums real quick like
[08:03] <UAEmirates> guys i have jdk-6u1-linux-amd64.bin file and i dont know how to install it?
[08:03] <bobsomebody> oh, did you try updating the wine to 9.031 or something like that?
[08:03] <kravlin> counterstrike Source, Total Annihilation
[08:03] <rabidweezle> Bassetts, you using fesity?
[08:04] <kravlin> nope.
[08:04] <rabidweezle> feisty*
[08:04] <gh0stid> FIRST OF ALL : bios setup :: first HD 400gig ( installed ubuntu on it ) second HD 160gig ( windows on it ) and used to be first HD at first try on installing ubuntu it installed GRUB on my 160gig hardrive ( wich is the windows one ) but ive installed ubuntu on my 400gig, once the installation was done it coudlnt boot anymore, saying grub error 22. then i installed it again, and used another dev (obviously the 400gig ) as grub install path, it would bo
[08:04] <gh0stid> ot the linux partition but not the windows one ..  anyone could help ? please.. heres the result of my menu.lst /fstab and fdisk -l http://www.pastebin.ca/575715 help me please ?
[08:04] <bobsomebody> there is a newer version, i just set it up and it works fine
[08:04] <bobsomebody> but im not a gamer
[08:04] <Bassetts> rabidweezle, yes
[08:04] <bobsomebody> how um... set up is your machine?
[08:04] <kravlin> bassetts. Try out this manager instead. its located at http://wicd.sourceforge.net/pages/about.php
[08:04] <bobsomebody> like can you reinstall and reconfigur?
[08:04] <bobsomebody> *reconfigure
[08:04] <kravlin> its about a week in bobsomebody. I could set up and reconfigure but its a pain in the ass and could take several weeks.
[08:05] <kravlin> meh. not a week in. about a month in.
[08:05] <kravlin> sorry
[08:05] <rabidweezle> Bassetts, http://ubuntuforums.org/showthread.php?t=318539
[08:05] <bobsomebody> Kravlin: ok, reinstall it, and when you get to partition, make one 1/2 the total size, one 256/512 (swap), and a second partition
[08:05] <kravlin> yeah. i was trying to avoid that.
[08:06] <kravlin> its a pain in the ass.
[08:06] <bobsomebody> it would be the safest way
[08:06] <kravlin> always.
[08:06] <bobsomebody> otherwise you could fork your disk :P
[08:06] <rabidweezle> Bassetts, pay close attention to the "stumbling blocks" section
[08:06] <kravlin> yep. that also would be a pain in the ass.
[08:06] <Bassetts> just seen that rabidweezle
[08:07] <bobsomebody> hey, whats a good PHP designer for nix?
[08:07] <`eric-> vim
[08:07] <`eric-> :P
[08:07] <bobsomebody> lol
[08:07] <talon223> true dat holmes
[08:07] <bobsomebody> gtfo
[08:07] <talon223> old school
[08:07] <bobsomebody> lol
[08:07] <bobsomebody> right
[08:07] <bobsomebody> i could nano away on some php yo
[08:07] <Bassetts> rabidweezle, how do i stop network manager?
[08:07] <`eric-> vim works fine for me :/
[08:07] <kravlin> bobsomebody : if i were to get another disk could you do it?
[08:08] <bobsomebody> kravlin: yeah
[08:08] <bobsomebody> i could walk you through it
[08:08] <rabidweezle> umm, sudo ps x, then kill -9 the pid
[08:08] <talon223> well for the sake of being efficient..i'd at least use emacs or gedit
[08:08] <byonix> how do i use my modem, i use aplay -l command and it was detected, but hardware information shows no modem available
[08:08] <joe4444> i had 2 displays working with TwinView in Edgy, and now i can't get them to work together in Feisty... the strange part is they don't even work together in the BIOS or while booting, whereas before i always had clones until the login screen... i tried my old xorg.conf with no luck
[08:08] <joe4444> any ideas?
[08:08] <rabidweezle> Bassetts, that's just a guess, I donno
[08:09] <chowmeined> whenever i try to start real player i get: "Segmentation fault (core dumped)"
[08:09] <kravlin> ok... The only problem? I have a pata disk that i could use but the whole linux system is running on a sata hard drive.
[08:09] <bobsomebody> Joe4444: i just went through a mess with mine
[08:09] <rabidweezle> I just disabled security...
[08:09] <niuq> linux create a thumbnail for each picture in a directory? for example   ._pic.jpg    it's the thumbnail for pic.jpg?
[08:09] <bobsomebody> check out #xorg, they rule
[08:09] <kravlin> bobsomebody: What do you want me to do?
[08:09] <joe4444> thanks bobsomebody
[08:09] <rabidweezle> I live in a redneck state of kentucky with hardly anyone with wireless...
[08:09] <bobsomebody> pata?
[08:09] <bobsomebody> np joe
[08:09] <talon223> and that's why i dislike KDE...i Loaded Amarok and Rhythmbox side by side, and Rhythmbox is all...simple...:)
[08:09] <rabidweezle> and I check my router everyday for leechers
[08:10] <bobsomebody> just pray your not building a driver like I did
[08:10] <bobsomebody> thank god there was a walk through
[08:10] <kury> coasters anyone?
[08:10] <kravlin> the parallell cables intead of the serial cables. maybe it has another name but i dont remember it at the moment. Sorry bobsomebody
[08:10] <bobsomebody> kravlin: IDE?
[08:10] <n2diy> How can I tell Nautilus _not_ to abbreviate files sizes?
[08:10] <kravlin> Yeah. sorry
[08:10] <bobsomebody> lol
[08:10] <kravlin> Im really stupid sometimes
[08:10] <kravlin> it shows through.
[08:10] <bobsomebody> is it pluged in?
[08:11] <bobsomebody> and powered?
[08:11] <bobsomebody> :P
[08:11] <kravlin> no but shutting down for a few minutes isnt a problem
[08:11] <detune> is anyone here good with samba
[08:11] <bobsomebody> ok, plug it in and come back
[08:11] <bobsomebody> detune: whats up?
[08:11] <bobsomebody> wow
[08:11] <bobsomebody> im usefull tonight
[08:11] <detune> bobsomebody: i set up smbmount or whatever to mount a shared folder in my vmware windows
[08:11] <thejapanesegeek> can anyone help me remove grub from a hard drive?
[08:12] <detune> bobsomebody: and it mounts fine using root
[08:12] <detune> bobsomebody: but i added a few things in my fstab line so i could edit it using my regular user and i get an error
[08:12] <bobsomebody> detune: so you can mount it but it wont stay?
[08:12] <bobsomebody> hm
[08:13] <bobsomebody> what error?
[08:13] <detune> bobsomebody: no it stays fine i just have to use root to do everything to it and that's a pain ... here i will show you the part of the fstab line i am talking about
[08:13] <kravlin> screw this. Why don't i just install the windows on the IDE Drive and find out how to access it from the GRUB Bootloader.
[08:14] <kruupy> My WoW installer thinks I have insufficient CPU speed even though im running a 2 GHZ CPU - how can I fix this?
[08:14] <illmortal> `Hey with these gdesklets, how do you get the weather to work? Non of them tell me the weather in my city... they all fail to retrieve information!
[08:14] <bobsomebody> kravlin: i was starting to wonder that
[08:14] <bobsomebody> or
[08:14] <detune> bobsomebody: //172.16.36.128/share /mnt/winbox      smbfs    user,noauto,umask=0000,username=user,pass=123 0 0
[08:14] <bobsomebody> install nix to the ide
[08:14] <Tom47> bruenig because i am curious (either way ;) )looks like there is at least one way .... just went looking to see why it would be a problem .... in this its done by making ext3 > ext2 first http://www.howtoforge.com/linux_resizing_ext3_partitions
[08:14] <bobsomebody> and then partition the sata
[08:14] <bobsomebody> and then install nix and win on the sata
[08:14] <joe4444> bobsomebody: you have dual displays?
[08:14] <bobsomebody> and mount the rest as storage
[08:15] <bobsomebody> joe4444: yeah, integrated VIA + Radeon PCI
[08:15] <bruenig> Tom47, you cannot resize the front of a partition from what I know, if this says that, read through it and report back far too long for me, then that is the first in any filesystem that I have heard of it
[08:15] <joe4444> oh, yeah ati can be a pain
[08:15] <kravlin> I already have a Ubuntu install on this hard drive. Why would i drop the integrity of that.,,
[08:15] <bryan> Hey everyone, hope its ok to post, hige problem, have Ubuntu intstalled on Macbook, and need to reinstall OSX, but cant
[08:15] <chowmeined> doesnt anything play real media!!?
[08:15] <bryan> huge*
[08:15] <vladuz976> i am having problems with imagemagick. i am trying to put a watermark on my pics, but nothing happens. can someone check out my scrip http://rafb.net/p/XtSgzM48.html
[08:15] <chowmeined> this is incredible
[08:15] <kravlin> Real Player Does....
[08:15] <bobsomebody> detune: might be a little over my head, try stuffing sudo in somewhere :P
[08:16] <chowmeined> real player segfaults on feisty
[08:16] <detune> bobsomebody: alright thanks heh
[08:16] <chowmeined> helix wont play it, mplayer wont play it, vlc wont play it
[08:16] <kravlin> true...
[08:16] <bobsomebody> joe4444: actually the VIA was
[08:16] <chowmeined> why on earth would MIT choose such a horrible format for their open course ware :-/
[08:16] <kruupy>  My WoW installer thinks I have insufficient CPU speed even though im running a 2 GHZ CPU - how can I fix this
[08:16] <bobsomebody> kravlin: well if you have windows running from the sata you will have better seek times in games
[08:16] <bobsomebody> kravlin: the IDE will slow you down
[08:16] <n2diy> chowmeined: it is free?
[08:17] <joe4444> bobsomebody: is it possible that the nVidia driver supplied by Envy for Edgy is better than the one provided by Feisty?
[08:17] <bobsomebody> but if you have nix on the IDE, you could repartition the sata right
[08:17] <chowmeined> n2diy: yea MIT has video lectures of a bunch of their courses available online
[08:17] <chowmeined> check it out, its awesome.. ocw.mit.edu
[08:17] <chowmeined> that is, if you can manage to play real media format :-/
[08:17] <phobiac> I want to get a usb bluetooth adapter for my laptop, but I'm looking for one that is well supported in Linux. Anyone have any reccomendations and/or a link to somewhere that has a list of one's that are well supported?
[08:17] <gh0stid> FIRST OF ALL : bios setup :: first HD 400gig ( installed ubuntu on it ) second HD 160gig ( windows on it ) and used to be first HD at first try on installing ubuntu it installed GRUB on my 160gig hardrive ( wich is the windows one ) but ive installed ubuntu on my 400gig, once the installation was done it coudlnt boot anymore, saying grub error 22. then i installed it again, and used another dev (obviously the 400gig ) as grub install path, it would bo
[08:17] <gh0stid> ot the linux partition but not the windows one ..  anyone could help ? please.. heres the result of my menu.lst /fstab and fdisk -l http://www.pastebin.ca/575715 help me please ?
[08:17] <ComunisTico> ns identify ncsrikay
[08:17] <bobsomebody> joe4444: i doubt it, there is probably a glitch somewhere, did you check the wiki?
[08:17] <kravlin> I didn't notice it six months ago before i had this Sata drive bobsomebody. I'm sure it's not gonna make that much of a difference.
[08:17] <n2diy> chowmeined: I don't have the horsepower here to play videos. :/
[08:18] <chowmeined> n2diy: they have audio recordings
[08:18] <chowmeined> n2diy: and text lecture notes
[08:18] <bobsomebody> ive got way to much crap
[08:18] <bryan> have Ubuntu Linux installed, and NEED my OSX back, but, the install DVD and CDs wont boot!
[08:18] <xystic> Hello. What packages for Ubuntu (that can be installed via synaptic) would I need to get to play most common video formats (mpg, avi) ?
[08:18] <n2diy> chowmeined: Roger on the audio and text.
[08:18] <bogor> Hi , In my OO.org spreadsheet i have 4 columns & variable no. of rows. With maximum of 35 rows. I want to find data that are common to all 4 columns. How do i do that ?
[08:18] <byonix_> how to receive video streaming with movie player
[08:18] <bobsomebody> 1 server 1 laptop 2 desktops, 6 screens total, a tv output, 2 layer dolby
[08:18] <Tom47> bruenig seems it can be done using gparted on ntfs ... http://gparted.sourceforge.net/larry/tips/gfs.htm ... but will check through the other too :)
[08:18] <Jordan_U> ccxxpro, using ms-sys to rewrite your 200/xp/2003 mbr run: "sudo ms-sys -m /dev/<your disk's device name>" Warning: Writing the wrong kind of boot record to a device might destroy partition information or file system!
[08:19] <bobsomebody> hehe
[08:19] <kruupy>  My WoW installer thinks I have insufficient CPU speed even though im running a 2 GHZ CPU - how can I fix this
[08:19] <bogor> xystic: gstreamer-ugly & gstreamer-bad
[08:19] <bobsomebody> synergy acrost 4 screens is WIN
[08:19] <n2diy> How can I tell Nautilus _not_ to abbreviate files sizes?
[08:19] <xystic> bogor: Thank you.
[08:19] <Jordan_U> bryan, What happens when you boot holding the option key with the OSx DVD in?
[08:20] <Jordan_U> kruupy, #winehq
[08:20] <bobsomebody> so yeah, does anyone know about a good php editor, something like zend? or phpstudio
[08:20] <kruupy> ok ty Jordon
[08:20] <bogor> xystic: also install win32codec if you are using mplayer
[08:21] <xystic> Thanks again
[08:21] <Jordan_U> xystic, win32codecs also work with vlc gxine and totem
[08:21] <SpawN> hello
[08:22] <SpawN> it is possible to enhance pointer procision ? =] 
[08:22] <kravlin> as long as you have newer hardware ubuntu is easy and fun.
[08:22] <kravlin> or actually just fun.
[08:22] <kravlin> actually nix that too.
[08:22] <Jordan_U> SpawN, Yes, System -> Preferences -> Mouse
[08:22] <chowmeined> vim is the editor of kings
[08:22] <chowmeined> bobsomebody: use vim
[08:22] <SpawN> Jordan_U but form terminal is possible??
[08:23] <SpawN> maybe there are more options
[08:23] <Jordan_U> SpawN, I am sure it is, but I don't know how :)
[08:23] <NForc3r> hi guys
[08:23] <NForc3r> i just put linux on my pc
[08:23] <SpawN> :)
[08:23] <NForc3r> yay
[08:23] <NForc3r> windows got PWND
[08:23] <`eric-> lol
[08:24] <kravlin> im putting windows back onto my pc. (Not by choice)
[08:24] <n2diy> ! info PWND
[08:24] <ubotu> Package pwnd does not exist in feisty, feisty-seveas
[08:24] <NForc3r> lol, only thing thats confusing me is the NVidia extra driver thing.
[08:24] <pyrosim> Hm... is it a bad sign when you have read the entire manpage on 'man'?
[08:24] <Patrick2056> Hi, newbie to Ubuntu and IRC for that matter
[08:24] <NForc3r> lol thats rite, ubuntu doesnt need to try to pwn
[08:24] <`eric-> lol
[08:24] <Patrick2056> seriously, but i'm not a complete moron
[08:24] <`eric-> did you type: man man
[08:24] <`eric-> :X
[08:24] <pyrosim> Yup
[08:25] <bryan> Jordan> yeah, I tried the "option" when booting, nothing happened
[08:25] <pyrosim> No, I used info
[08:25] <bryan> just booted into Ubuntu
[08:25] <Jordan_U> NForc3r, Just use System -> Administration -> Restricted Driver Manager
[08:25] <Patrick2056> anyway i have a simple question
[08:25] <NForc3r> when i pressed enable extra driver it just switched off
[08:25] <bogor> NForc3r: whats pwn . Tr
[08:25] <kravlin> and there's the pitch!
[08:25] <Patrick2056> UB's not allowing me to write files to my external HD
[08:25] <NForc3r> its own but someone spelt it wrong and it became a gaming term
[08:25] <Jordan_U> Patrick2056, NTFS?
[08:26] <Patrick2056> says i don't have authorization, even though I'm the admin
[08:26] <`eric-> !ntfs
[08:26] <ubotu> To view your Windows/Mac partitions see https://help.ubuntu.com/community/AutomaticallyMountPartitions . For write access see !ntfs-3g or !fuse
[08:26] <Patrick2056> yes
[08:26] <Jordan_U> !ntfs-3g | Patrick2056
[08:26] <ubotu> Patrick2056: ntfs-3g is a Linux driver which allows read/write access to NTFS partitions. Installation instructions at https://help.ubuntu.com/community/MountingWindowsPartitions
[08:26] <n2diy> Patrick2056: why not, error messages?
[08:26] <NForc3r> pronounced own its tells people if ur a n00b, if u say pwn (pone) ur a n00b
[08:26] <kravlin> it pronounces that every one of my friends is a noob.
[08:26] <kravlin> its funny.
[08:27] <Patrick2056> Ok, many thanks to all of you and im sure i'll see you again
[08:27] <bogor> n my OO.org spreadsheet i have 4 columns & variable no. of rows. With maximum of 35 rows. I want to find data that are common to all 4 columns. How do i do that ?
[08:27] <NForc3r> ok guys ill bother you about my driver problem once i update and reset my UBUNTU pc
[08:28] <Patrick2056> BTW, Ub rox my sox off and bill gates and paul allen can kiss our collective dollars buh-bye
[08:28] <m1r> lol patrick
[08:28] <m1r> morning guys
[08:28] <bryan> haha, sorry if Im annoying, but, have deadlines for some things tomorrow(well later today) and need OSX installed back on my Macbook, Ubuntu is on now, and my Tiger DVD, and CDs wont boot??
[08:29] <Jordan_U> bryan, What happens when you boot holding the option key with the OSx DVD in?
[08:29] <newuser> hi.. i wana ask.. how to install ubuntu in 1 partition without swap
[08:29] <bryan> Jordan> option at boot isnt doing anything...
[08:29] <bryan> neither is apple/option/o/f
[08:29] <newuser> hi i wana ask.. how to install ubuntu in 1 partition without a swap partition
[08:29] <newuser> ?
[08:29] <bryan> for open firmware! its freaking me out!
[08:30] <n2diy> newuser: how much ram do you have?
[08:30] <newuser> 2G
[08:30] <Jordan_U> bryan, There is no open firmware on new macs, just a sec got to go for a min.
[08:30] <bryan> Jordan> ok, well, thats good to know, let me know when youre back!
[08:31] <n2diy> newuser: so install, and don't create a swap partition. Probably not a good idea, but... It is your box.
[08:31] <m1r> bryan, sry i dont know anything about mac, but shouldnt it have some option to chose where to boot from ?
[08:31] <xystic> Is there somewhere to browse any version of ubuntu sources, online (without having to checkout from an SVN)?
[08:32] <tovella> newuser: one good reason to use a swap partition is to be able to hibernate or suspend-to-ram.
[08:32] <bryan> m1r> yes, usually when you use the "option" key during boot, it will give you the options to boot into
[08:32] <noodles13> !ati
[08:32] <ubotu> To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto
[08:32] <Jordan_U> bryan, Back :) Can you boot into target disk mode? ( hold down T )
[08:32] <SpawN> tovella what esle is good "swap" for?
[08:32] <SpawN> =] 
[08:32] <m1r> bryan , do u have acces to bios ?
[08:32] <DraconPern> How can I find out the reason a /dev/md device has degraded?
[08:32] <Jordan_U> SpawN, Hybernating
[08:32] <bryan> ill try target disc
[08:32] <`eric-> mlr: mac's dont work that way
[08:32] <SpawN> good
[08:32] <m1r> i c
[08:33] <newuser> n2diy, i use vista now.. and i wana install ubuntu... but it seems that i cannot chose the partition
[08:33] <tovella> SpawN: many things, but with 2GB of ram...
[08:33] <bryan> Jordan, if it boots into target disc, then what?
[08:33] <`eric-> mlr: there is no *bios* in the sense that there is on a pc
[08:33] <bryan> assuming i get that far
[08:33] <tovella> newuser: sorry, i meant suspend to disk.
[08:33] <noodles13> i tried following this guide http://ubuntuforums.org/showthread.php?t=414194 for ati drivers in fiesty but it says that "xorg-driver-fglrx" doesnt' exist
[08:33] <Jordan_U> m1r, What are you trying to do?
[08:33] <n2diy> newuser: Ubuntu will/should create it's own swap partition.
[08:33] <m1r> jordan_u, just info
[08:34] <newuser> n2diy, it said no root dile system is defined
[08:34] <bryan> ok, Jordan, so if "T" works, whats the next step
[08:34] <Jordan_U> m1r, On macs you can hold down the option key at boot and it will detect any bootable drives and give you a menu to choose from
[08:34] <bryan> or should i test her and log back in here?
[08:34] <Flannel> newuser: You used a previously created partition?
[08:35] <Jordan_U> bryan, Do you have another mac by any chance?
[08:35] <bryan> Jordan> i think thats the odd part with Ubuntu installed, maybe its not recognizing the drive as bootable?
[08:35] <niuq> hello, i am trying to transfer files with gftp but it's to slow and appears a message "transfer stalled", not sure what it means
[08:35] <n2diy> newuser: Ok, Vista is new to all of us, who knows what is going on with that, sounds like MS is playing dirty tricks?
[08:35] <bryan> no, just my Macbook? why
[08:35] <niuq> any help?
[08:35] <bryan> the DVD, and CD (installs) mounted fine in OSX before Ubuntu though, if that was the concern
[08:35] <newuser> i cannto see my partition, i can see my hard drive
[08:35] <rabidweezle> niuq, have you tried just the ftp command?
[08:36] <drowner> Hi aghain everyone
[08:36] <drowner> little help pls
[08:36] <niuq> rabidweezle: no i have not, i am usgin gftp that has a gui
[08:36] <drowner> i just upgraded my RAM today from 256mb to 1gig
[08:36] <Flannel> newuser: Youre in the installer currently, correct?  At the "choose your root partition" step?  Did you not create a partition on the previous screen?
[08:36] <rabidweezle> niuq, the ftp command is pretty easy, but I wouldn't suggest it for many files
[08:37] <drowner> so i repartitioned my swap to 2gig (unnecessary, but i thought why not?) and unfortumnately the system momnitor doesnt seem to recognise any swap at all
[08:37] <tovella> newuser: another reason - if you end up doing a lot more stuff than you expected, that swap partition could come in really handy.
[08:37] <niuq> rabidweezle: there are actually to many files...
[08:37] <Flannel> !swap | drowner
[08:37] <ubotu> drowner: swap is used to move unused programs and data out of main memory to make your system faster. It can also be used as extra memory if you don't have enough. See https://help.ubuntu.com/community/SwapFaq for more info
[08:37] <niuq> rabidweezle: do you know why appears that message "transfer stalled"?
[08:37] <rabidweezle> niuq, ouch... hrm, stalled... is it connecting multiple times to the server?
[08:37] <Flannel> drowner: you'll need to activate it and stuff, that page should give you all the details
[08:37] <CapLovesMikey> is there a way to have my screensaver start on a monitor im not using until i move my mouse to it?
[08:37] <drowner> cool
[08:38] <rabidweezle> niuq, some ftp clients make multiple connections, like one for each transfer
[08:38] <tovella> newuser: if you end up using putting that computer to much more use, i mean.
[08:38] <rabidweezle> niuq, most ftp servers only allow sooo many connections before they kick you for abuse
[08:38] <niuq> rabidweezle: how do  i check if my ftp it's doing in that way?
[08:38] <rabidweezle> niuq, hold on, lemme actually install gftp and see the options
[08:39] <niuq> rabidweezle: ok, thank you
[08:39] <rabidweezle> apt-get install gftp
[08:39] <rabidweezle> oops, wrong window lol
[08:39] <Flannel> drowner: er, where that says to add a swap file, you do basically the same thing, except instead of making the file, you make (already) a partition, in a partition manager.  The rest is all the same.
[08:39] <mita> hii
[08:39] <niuq> rabidweezle: lol yes
[08:39] <n2diy> rabidweezle: niuq, why are you using ftp to begin with? There are better ways to move files no a days.
[08:39] <n2diy> no/now
[08:39] <Jordan_U_> Sorry bryan, I got disconnected ( wireless problems )
[08:39] <drowner> flannel: I've already partitioned, right? so what do I need to do? just modify fstab?
[08:39] <rabidweezle> alot of web hosts use ftp
[08:39] <niuq> rabidweezle: i am moving my website to a hosting
[08:39] <bryan> haha\
[08:40] <bryan> its cool
[08:40] <rabidweezle> niuq, I read your mind lol
[08:40] <niuq> rabidweezle: ^_^)!
[08:40] <Jordan_U_> bryan, Did you hold C after hearing the boot sound?
[08:40] <niuq> n2diy: i am moving my website to a hosting
[08:40] <Flannel> drowner: You need to mkswap, swapon, and then the fstab. (just remove the first step, since you already did it, except with a partition instead of a file)
[08:40] <n2diy> rabidweezle: niuq, ok, but check out scp, and see if your host supports that?
[08:41] <NForc3r> omg why cant i instal wine
[08:41] <niuq> rabidweezle: what does scp stands for?
[08:41] <Flannel> NForc3r: You need to enable universe
[08:41] <niuq> rabidweezle: sorry wrong user :P
[08:41] <NForc3r> what and how
[08:41] <noodles13> !touchpad
[08:41] <bryan> Jordan> yes, so far, Ive tried the usual: "C", and tried open firmware, which, now I know isnt on Intel Macs
[08:41] <ubotu> Sorry, I don't know anything about touchpad - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[08:41] <niuq> n2diy: what does scp stands for
[08:41] <bryan> haha
[08:41] <Daverocks> niuq: secure copy, it copies a file over ssh
[08:41] <Flannel> !universe | NForc3r
[08:41] <ubotu> NForc3r: The packages in Ubuntu are divided into several sections. More information at https://help.ubuntu.com/community/Repositories and http://www.ubuntu.com/ubuntu/components - See also !EasySource
[08:41] <Jordan_U_> NForc3r, System -> Administration -> Software Sources
[08:41] <rabidweezle> niuq, try turning off passive file transfers in options>ftp
[08:41] <Flannel> !synaptics | noodles13
[08:41] <ubotu> noodles13: For a comprehensive Synaptics Touchpad guide, see https://help.ubuntu.com/community/SynapticsTouchpad
[08:41] <n2diy> rabidweezle: niuq, secure copy, it is part of the ssh package.
[08:41] <niuq> n2diy: and why would i check that, and how anyways?
[08:41] <Daverocks> !wine | NForc3r
[08:41] <ubotu> NForc3r: wine is a compatibility layer for running Windows programs on GNU/Linux. See https://help.ubuntu.com/community/Wine for more information.
[08:42] <drowner> flannel: Ok. do i need to remove the current fstab entry for swap?
[08:42] <bryan> Jordan> you mentioned Target Disc Mode/
[08:42] <bryan> ?
[08:42] <niuq> rabidweezle: i already tried that
[08:42] <n2diy> rabidweezle: niuq, it is secure.
[08:42] <Flannel> drowner: no, you can have multiple swap partitions
[08:42] <noodles13> Flannel: thanks. i just updated to feisty and my scroll doesnt' work
[08:42] <dyclops> where is http.conf located?
[08:42] <drowner> well the previouis entry is for a swap partition that doesnt exist anymore
[08:42] <niuq> n2diy: ok, just tell me how do i check that...
[08:42] <rlj> hm. the temerature acpi reports in thermal_zone is about 10C lower than what the lm_sensors module k8temp reports. i wonder which one is more correct....
[08:42] <Flannel> dyclops: Ubuntu doesnt use httpd.conf (It's the debian style)
[08:42] <Jordan_U_> bryan, Yes, that would only help if you had another mac you could connect to it with firewire and install from there
[08:43] <NForc3r> i could do it in virtual pc and live cd tho
[08:43] <Flannel> drowner: ah, then yeah, remove that.
[08:43] <NForc3r> without no extra software
[08:43] <NForc3r> it was just
[08:43] <Flannel> drowner: What are you trying to modify?
[08:43] <dyclops> Flannel, where would i find the config file for apache
[08:43] <rabidweezle> hrm niuq does it upload multiple files at once or one at a time?
[08:43] <rlj> i mean the other way around. lm_sensors reports about 10C lower temp
[08:43] <niuq> rabidweezle: you mean passive file transfer fright?
[08:43] <rabidweezle> yes
[08:43] <`eric-> dyclops: locate http.conf
[08:43] <NForc3r> ad the rep and type sudo apt-get install wine
[08:43] <bryan> Jordan> yeah, no such luck there, only my Macbook, and the OSX install DVD, or the 4 disc install CDs
[08:43] <`eric-> it's in apache_folder/conf/http.conf
[08:43] <drowner> flannel: I repartitioned the sda2 (extended) and sda5 (swap) and made it bigger.
[08:43] <n2diy> niuq: system > admin > synaptic, and then search for ssh, and read the description.
[08:43] <Flannel> dyclops: it's all in /etc/apache2 (well, or /etc/apache, but I imagine you have apache2).  apache2.conf is for serverwide things (normal things), mods-enabled is for modules, sites-enabled for virtualhost related thigns.
[08:43] <niuq> rabidweezle: "do one transfer at one", that is checked
[08:44] <Jordan_U_> NForc3r, Exactly, and have you added the repo ?
[08:44] <bryan> Jordan> none which have booted from "C" at start, but, all are new and I know are ok
[08:44] <rabidweezle> alright niuq and that don't work either?
[08:44] <n2diy> niuq: ssh stands for secure shell.
[08:44] <NForc3r> i typed wget -q http://wine.budgetdedicated.com/apt/387EE263.gpg -O- | sudo apt-key add - into console
[08:44] <Flannel> dyclops: those all, taken as a whole, make up the entirety of your apache configuration.  What are you looking to change?
[08:44] <NForc3r> Suggested packages:
[08:44] <NForc3r>   msttcorefonts xdg-utils
[08:44] <NForc3r> The following NEW packages will be installed:
[08:44] <NForc3r>   libartsc0 wine
[08:44] <kraut> moin
[08:44] <NForc3r> 0 upgraded, 2 newly installed, 0 to remove and 4 not upgraded.
[08:44] <NForc3r> E: Could not get lock /var/cache/apt/archives/lock - open (11 Resource temporarily unavailable)
[08:44] <Flannel> !paste | noodles13
[08:44] <ubotu> noodles13: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic)
[08:44] <NForc3r> E: Unable to lock the download directory
[08:44] <NForc3r> opps
[08:44] <niuq> rabidweezle: it is working but goes TO slow :S!!
[08:44] <NForc3r> sorry
[08:44] <Flannel> sorry noodles13
[08:44] <niuq> n2diy: ok ok, give me a second
[08:44] <Jordan_U_> n2diy, Let me see if there is a way to install rEFIt from Linux...
[08:45] <rabidweezle> niuq, sounds like your host to me
[08:45] <n2diy> How can I tell Nautilus _not_ to abbreviate files sizes?
[08:45] <Flannel> n2diy: probably something in gconf
[08:45] <NForc3r> well i typed wget -q http://wine.budgetdedicated.com/apt/387EE263.gpg -O- | sudo apt-key add - into the console
[08:45] <n2diy> Jordan_U, ??
[08:45] <niuq> rabidweezle: what do you mean?
[08:45] <NForc3r> then sudo wget http://wine.budgetdedicated.com/apt/sources.list.d/feisty.list -O /etc/apt/sources.list.d/winehq.list
[08:45] <n2diy> Flannel: ???
[08:45] <niuq> n2diy: ssh isnt a shell btw?
[08:45] <NForc3r> then the sudo install wine line
[08:45] <rabidweezle> niuq, well, not really, most ftp's don't want you sucking all their bandwidth...
[08:46] <Flannel> NForc3r: close Any other package managers you have open (synaptic, update-manager, etc)
[08:46] <Jordan_U_> n2diy, It is! sudo apt-get install refit
[08:46] <rabidweezle> niuq, so you upload one at a time, it takes forever yes...
[08:46] <NForc3r> got it working i think
[08:46] <niuq> rabidweezle: more than forever actually...
[08:46] <rabidweezle> niuq, but at least it gets through
[08:46] <Flannel> n2diy: gconf, for modifying what nautilus shows you for file sizes.  It might be in there (I dont know), but if it is, that'd most likely be where.
[08:46] <rabidweezle> niuq, you hosting alot of big files or something?
[08:47] <niuq> rabidweezle: noup, pure pictures, and some swf, but nothing big
[08:47] <tovella> n2diy: perhaps you can get a more definitive answer from a gnome or nautilus channel.
[08:47] <n2diy> Flannel: Ah, ok, thanks, info overload here.
[08:47] <Flannel> n2diy: install `gconf-editor` and it'll drag in the other packages you need.
[08:47] <rabidweezle> sounds like your host is stingy
[08:47] <Whack> anyone know where I can find drivers for a radeon 7500? I can only get it to work in vesa mode
[08:47] <drowner> flannel: if its the same partition and the fstab has it 'mounted' as swap, why is it not showing up? I shouldnt have to mkswap should i?
[08:47] <rabidweezle> niuq, also note, your upload speed...
[08:47] <rollerskatejamms> Whack, the standard ati drivers should work for it, with 3D
[08:48] <Flannel> drowner: you do.  Follow all (four minus one) instructions in that guide.
[08:48] <walla_> my splash screen hangs on boot up, how do i find out what's causing it?
[08:48] <niuq> rabidweezle: the biggest is about 120 kb
[08:48] <rabidweezle> niuq, what is your upload?
[08:48] <rollerskatejamms> Whack, the open source ones
[08:48] <n2diy> Flannel: I opened #nautilus, and I've been the only user there for three days. :)
[08:48] <Whack> rollerskatejamms: the ones from ATI?
[08:48] <Jordan_U_> bryan, sudo apt-get install refit
[08:48] <rollerskatejamms> Whack, no
[08:48] <Flannel> walla_: at GRUB, hit 'e' and then remove the 'quiet splash' from the line, and then boot with it.  You'll get all the details of your bootup.
[08:48] <rollerskatejamms> Whack, built in ones
[08:48] <crabgrass> hey guys, trying to write a shell script... can i umount something if i know only to where it is mounted?
[08:48] <niuq> rabidweezle: when appears transfer stalled, stop showing me the upload speed
[08:48] <dhamma> need some advice from any lvm gurus
[08:48] <Flannel> !anyone | dhamma
[08:48] <Whack> well, I installed ubuntu with a different video card - how can I change them?
[08:49] <ubotu> dhamma: A large amount of the first questions asked in this channel start with "Does anyone/anybody..."  Why not ask your next question (the real one) and find out?
[08:49] <rabidweezle> is it STILL stalling niuq ?
[08:49] <rabidweezle> o_O
[08:49] <walla_> it's not on boot, it's after i log in
[08:49] <Jordan_U_> bryan, Then reboot, hopefully you will see a graphical boot device chooser ( not GRUB, you will be able to tell )
[08:49] <drowner> flannel: Im a bit mixed up. I've never made a swapfile before. Do i need to do it now?
[08:49] <n2diy> tovella: Thanks, Gnome is dead, as is Nautilus.
[08:49] <niuq> rabidweezle: yes it is
[08:49] <crabgrass> nm, got it
[08:50] <Flannel> drowner: no.  You're using a swap partition instead of a file.  Ignore the first step of those four (you're not making a file, you're using a partition, and you've already done it), and then do the remaining three steps, modified appropriately to your partition path.
[08:50] <niuq> rabidweezle: it get stalled for a while, then upload a part of the file then get stalled again .... and so on
[08:50] <tovella> n2diy: they may be called something else, but i'm sure there are such channels.  you may have to do a search for them :)
[08:50] <Whack> if there are drivers for the radeon 7500 built-in to ubunto, how I can I use them?
[08:50] <Flannel> walla_: ah.  Try, under session, try 'failsafe gnome' or 'safe gnome' or whatever its called on your version.
[08:50] <n2diy> rabidweezle: My CPR cert. is expired! :)
[08:50] <walla_> ok
[08:50] <bryan> Jordan> i did the sudo apt-get install refit, but didnt work? asked if i was root, which i am
[08:50] <drowner> flannel: ahh., so sudo mkswap /dev/sda5
[08:51] <drowner> is that right?
[08:51] <rabidweezle> niuq, I'd call the host up and be like HEY! your line keeps dropping my packets!
[08:51] <Flannel> drowner: right.
[08:51] <Jordan_U_> bryan, That is strange
[08:51] <niuq> rabidweezle: would be a expensive call lol
[08:51] <bryan> Jordan> got it, its working
[08:51] <rabidweezle> niuq, with someting like that, I would never blame my software, that sounds alot like their fault
[08:51] <Jordan_U_> bryan, Can you pastebin the output it gave?
[08:51] <dhamma> i just added a reiserfs partition with data on it to my vg, doubling its size.  i want to extend my lv to fill out the new capacity of the vg.  i don't care about the existing data on the added reiserfs partition.  i'm new to lvm, so i'm not sure if i can lvextend easily and whether or not the ext3 filesystem will automatically fill up the extended partition or if that's a separate step and whether it's problem that the cu
[08:51] <n2diy> tovella: Roger that, and I just realized I have #gnome shut off, but I asked there for days with no luck.
[08:51] <bryan> Jordan> ok, refit installed
[08:52] <niuq> rabidweezle: the host it's not in my country ^^!
[08:52] <Puck_> test
[08:52] <rabidweezle> niuq, is it across the ocean?
[08:52] <bryan> but, where I can post the post the output? jusst to make sure?
[08:52] <Jordan_U_> bryan, OK, try rebooting with the OSX DVD in and don't hold anything
[08:52] <bryan> oh, ok
[08:52] <DraconPern> niuq, are you having trouble with ftp, like after a transfer, it stalls?
[08:53] <drowner> flannel: awesome! done! do i need to fix the fstab?
[08:53] <Jordan_U_> bryan, And if it works come back here if it's not to much trouble, I am curious :)
[08:53] <Flannel> dhamma: probably easiest to simply reformat the reiser partition to lvm type, and then you'll have two physical volumes, merged into one volume group
[08:53] <rabidweezle> DraconPern, it stalls during I believe
[08:53] <crabgrass> okay, i have a question about triggering while loops in shell scrips, can anyone help?
[08:53] <crabgrass> sorry i cant phrase the question better
[08:53] <Flannel> drowner: to add your new swap partition (and remove the old one, or just change the 3 to a 5, or whatever)
[08:54] <jscinoz> Hey guys
[08:54] <drowner> flannel: no dice. Its got a UUID entry. Can i just delete that and type /dev/sda5 instead?
[08:54] <jscinoz> anyone happen to know how to establish a SSH tunnel through a proxy that uses a non standard https port (8080)?
[08:54] <DraconPern> rabidweezle, niuq, fyi, I am using pair, and recently their ftp has been strange.  I can upload 1 file, and then when it tries to do ls, it stalls.
[08:54] <Flannel> drowner: yeah.  Or you can get the new UUID.
[08:54] <dhamma> Flannel: i've already added the reiserfs partition using pvextend and it is recognized with pvdisplay
[08:54] <dudaz> hi just a off topic qn... some channels require u to register or sumtin in NickServ... how do i go bout that.. i am using chatzilla
[08:54] <crabgrass> okay, lemmie ask this: is    while [ -e /media/cdrom0/ ] ;   valid?
[08:54] <Flannel> !register > dudaz
[08:54] <jscinoz> dudaz "/msg nickserv register PASSWORD EMAIL"
[08:55] <rabidweezle> weird DraconPern
[08:55] <n2diy> crabgrass: you might try #bash
[08:55] <crabgrass> n2diy: oh, we have one of those?
[08:55] <crabgrass> n2diy: i'll head over there, thanks!
[08:55] <rabidweezle> DraconPern, I normally just use my computer for my web server, so I wouldn't know about these new sites with ftp's
[08:55] <n2diy> crabgrass: yep 272 users there now.
[08:55] <crabgrass> n2diy: oh wow, and we're all op
[08:56] <Flannel> dhamma: So, just expand your LV into the new LG, or make a new LV or whatnot.
[08:56] <Patrick2056> Hi I was having trouble moving files into my external HD so i installed the ntfs-3g pckg.  now it's locked and i'm getting msg "cannot mount volume"
[08:56] <n2diy> crabgrass: ??
[08:57] <tovella> n2diy: irc.gnome.org - #nautilus
[08:57] <Jordan_U_> Patrick2056, Did you install ntfs-config ?
[08:57] <Patrick2056> there are suggestions for a forced mount but the terminal process didn't work and i don't have a /etc/fstab file, only ftsa
[08:58] <Patrick2056> yes, installed ntfs config
[08:58] <dhamma> Flannel: what i was originally asking is whether using lvextend to allocate the unused pe of the added reiserfs partition automatically extends the ext3 filesystem or whether that was a separate step and whether or not it mattered that it already has a different filesystem written on it
[08:59] <n2diy> tovella: roger that, how do I tell gnome-xchat to go to that server?
[08:59] <Patrick2056> i selected "enable write support for external device" in the ntfs config app
[08:59] <tovella> n2diy: not sure, i use gaim.
[09:00] <n2diy> tovella: it isn't in the connect list? Roger on using gaim.
[09:00] <Flannel> dhamma: ah.  Good question.  I don't know.  You might try #lvm if no one can answer that here
[09:00] <dudaz> jscinoz: after typing that command, how do i enter the java channel..
[09:00] <VERTiG0> is there a way to get a default install of ubuntu to use XFCE instead of GNOME?
[09:01] <n2diy> How do I add servers to gnome-xchat?
[09:01] <Flannel> VERTiG0: sure.  Get Xubuntu install disks
[09:01] <bruenig> VERTiG0, its's called xubuntu
[09:01] <dhamma> Flannel: yeah, i'm already in there, but everyone is asleep apparently...oh well, i figured this was an issue better left for the forums...thanks anyway
[09:01] <Jordan_U_> VERTiG0, Yes, install the package xubuntu-desktop
[09:01] <jscinoz> dudaz "/msg identify PASSWORD" (you'll need to do this every connect, probably a way to have your IRC client do it auto) then /join #whateverchannel
[09:01] <n2diy> Err, e
[09:01] <Flannel> dhamma: well, freenode does usually lull for a few hours right about now.
[09:01] <n2diy> Err, Xchat-gnome?
[09:02] <bruenig> n2diy, you should install xchat
[09:02] <dhamma> Flannel: yeah...well luckily this isn't a 911 emergency, so i can wait it out
[09:02] <bruenig> as it is better
[09:02] <Whack> argg... I got the built-in ATI driver working, but the vsync is way off, picture is shifted like 300px left
[09:02] <n2diy> bruenig: as opposed to xchat-gnome?
[09:02] <Patrick2056> jordan u, think i should just reinstall and reformat?
[09:02] <VERTiG0> haha.  stupid question, i guess.  thanks guys :D
[09:02] <bruenig> n2diy, yes
[09:03] <Patrick2056> try ntfs-3g again
[09:03] <Flannel> VERTiG0: there are no stupid questions
[09:03] <VERTiG0> Oh, but wait - would Xubuntu run better on, say, a P3 933 with 384MB RAM than standard Ubuntu?
[09:03] <bruenig> only stupid people
[09:03] <bruenig> VERTiG0, it would yes
[09:03] <VERTiG0> i notice that from time to time the CPU will spike to 100% for over 30 seconds for no reason while using ubuntu with gnome
[09:03] <tovella> n2diy: click on Xchat, then Networks, then press the "Add" button.
[09:03] <Flannel> VERTiG0: Ubuntu should run fine on that, but yeah, Xubuntu is more lightweight, as such, it performs better.
[09:03] <Jordan_U_> Patrick2056, You might be having problems because your NTFS partition is corrupted, try fixing it in windows
[09:03] <Whack> is there anywhere I can adjust vsync without having to edit xorg.conf and reboot each time?
[09:03] <bruenig> xubuntu will run better on virtually any hardware as would anything which is lightweight
[09:03] <VERTiG0> somewhat sluggish performance at time with it as well
[09:03] <n2diy> bruenig: Ok, thanks, I _thougt_ I was done installing stuff?!
[09:04] <VERTiG0> thanks bruenig and Flannel!
[09:04] <newuser> help... after i put ubuntu live cd and now i reboot but it won't get into vista now.. why?
[09:04] <VERTiG0> time to blow another disc on xubuntu :)
[09:04] <sWiTCH_> are there any good hard drive programs for ubuntu,  iubuntu seems to not find my drive, the bios see's it
[09:04] <Patrick2056> lol, i accidentally didn't leave a windows partition when I was messing round with this new cpu
[09:04] <Jordan_U_> Whack, You don't need to reboot, just restart X with ctrl+alt+backspace
[09:05] <Jordan_U_> Patrick2056, Well there's your problem ;)
[09:05] <newuser> i wana go to my windows
[09:06] <VERTiG0> newuser, you took the CD out, right?
[09:06] <n2diy> tovella: ok, here it is network > channels, but I found it, thanks.
[09:06] <newuser> yes
[09:06] <newuser> vertigo, yes
[09:06] <|Osiris> hi
[09:06] <VERTiG0> you didn't double click the install icon on the desktop while you were using the livecd, did you?
[09:06] <newuser> vertigo, but it said no operating system
[09:06] <Patrick2056> it's got to be an admin thing b/c before it showed the files and rendered them fine, just no moving files from here to there
[09:06] <VERTiG0> whoa.
[09:06] <VERTiG0> you uh
[09:06] <newuser> vertigo, i did
[09:07] <VERTiG0> probably somehow nuked your vista installation
[09:07] <|Osiris> I have PIII 866 should I install Kubuntu, Ubuntu or Xubuntu?
[09:07] <VERTiG0> hah.
[09:07] <VERTiG0> yeah
[09:07] <VERTiG0> you wiped out your vista install.
[09:07] <yknott> |Osiris: any you like
[09:07] <newuser> vertigo, man...................................................................................
[09:07] <yadra> what're the URLs for Ubuntu's Universe and Multiverse repos?
[09:07] <newuser> really???
[09:07] <|Osiris> yknott, and speed like?
[09:07] <VERTiG0> newuser, sure sounds like it
[09:07] <|Osiris> yknott, I mean Kubuntu is heavier right?
[09:07] <Flannel> yadra: same as the other ones.  Just with "universe" and/or "multiverse" instead of "main" or "restricted"
[09:07] <VERTiG0> when you went through the Ubuntu install, what options did you choose?
[09:07] <disinterested> newuser: yep vista be gone
[09:08] <Jordan_U> yadra, You can enable them in System -> Administration -> Software Sources
[09:08] <yknott> |Osiris: i do not find it so, but i switch from xfce to kde and back
[09:08] <yadra> all the help sites on the topic seem to give instructions, not URLs
[09:08] <Flannel> |Osiris: Ubuntu and Kubuntu are comperable (more or less).  Xubuntu is more lightweight.
[09:08] <newuser> :(
[09:08] <yadra> sorry, i'm not actually in ubuntu
[09:08] <yknott> yadra: such as?
[09:08] <yadra> i'm in Mandriva
[09:08] <VERTiG0> newuser what kind of PC is it
[09:08] <|Osiris> Kubuntu it is then ;)
[09:08] <Flannel> yadra: that's because there's no "set" URLs, theyre just ... oh.
[09:08] <Patrick2056> Thank you Jordan, if i find anything new I'll let ya know what it was
[09:08] <VERTiG0> is it something you bought at a store, like an HP or something?
[09:08] <Flannel> !easysource | yadra
[09:08] <ubotu> yadra: source-o-matic is a webpage where you can (re)generate your sources.list - http://www.ubuntu-nl.org/source-o-matic
[09:08] <Jordan_U> yadra, You cannot use Ubuntu packages in Mandrivia
[09:08] <VERTiG0> 'cause hopefully you've got the restore discs if that's the case, or a copy of vista kicking around you can reinstall with
[09:08] <yadra> i installed apt and synaptic though
[09:09] <Jordan_U> yadra, They are not compatible
[09:09] <Flannel> yadra: That means you can use deb packages, but Ubuntu's deb packages aren't necessarily binary compatable with Mandriva
[09:09] <yadra> Jordan_U: interesting
[09:09] <Jordan_U> yadra, Just like you can't install debian repos in Ubuntu
[09:09] <Flannel> yadra: Debian and Ubuntu aren't necessarily binary compatable either.
[09:09] <yadra> Jordan_U: mmm
[09:09] <dbzdeath[lappy] > hey is there somewhere where i can find out exactly what programs are on the feisty live cd?
[09:10] <Flannel> same format, but since the packages are named differently (and other things), theyre not "the same"
[09:10] <bryan> Jordan> so, holding "T"
[09:10] <Flannel> dbzdeath[lappy] : i386? or what arch?
[09:10] <VERTiG0> another question for you folks: is fluxbox even lighter than XFCE?
[09:10] <bryan> did nothing
[09:10] <bryan> neither did refit
[09:10] <dbzdeath[lappy] > Flannel: i386
[09:10] <n2diy> Jordan_U: what do you mean they aren't compatible?
[09:10] <Jordan_U> dbzdeath[lappy] , run dpkg -l from a liveCD
[09:10] <Flannel> dbzdeath[lappy] : http://releases.ubuntu.com/7.04/ubuntu-7.04-desktop-i386.manifest
[09:11] <dbzdeath[lappy] > thanks Flannel
[09:11] <dbzdeath[lappy] > and thanks Jordan_U
[09:11] <Flannel> dbzdeath[lappy] : the manifest files are what's "in" the liveCD image, the list files are the fiels on the CD (as files, like the small repository)
[09:11] <Jordan_U> bryan, Is there an Apple store near you?
[09:11] <bryan> yeah, I made an appointment for tomorrow
[09:11] <dbzdeath[lappy] > Flannel: in other words some of those files i will need to run apt-get install package?
[09:11] <Flannel> build-essential, for instance, isnt in the manifest, because it's not in the image, just on the CD.
[09:12] <bryan> I just was really hoping to avoid it\
[09:12] <yadra> thanks ubotu, http://www.ubuntu-nl.org/source-o-matic/ is exactly what i needed, though you're a bot aren't you? LOL
[09:12] <Flannel> dbzdeath[lappy] : no.  Everything in the manifest is compiled/built/whatever in to the Live environment.  However there's some stuff on the CD that isn't in the live environment
[09:13] <dbzdeath[lappy] > Flannel: ahh... specifically i'm looking for hostap-utils
[09:13] <Flannel> that's the stuff listed in the .list file (same place, different file, just change the extension)
[09:13] <gyaresu__> Hey peeps. What's the menu location for 'special effects' (beryl)? Helping a friend on the phone...
[09:13] <Flannel> dbzdeath[lappy] : hostap-utils is in universe, and as such, wouldn't be on the CD.
[09:13] <dbzdeath[lappy] > Flannel: hm..
[09:13] <gyaresu__> after installing automatix that is...
[09:13] <Jordan_U> bryan, Ahh, it seems you need to have an HFS+ partition to use rEFIt :(
[09:13] <Flannel> !automatix | gyaresu__
[09:14] <ubotu> gyaresu__: Automatix2 is a script that tries to install some software, and often fails and breaks systems. We don't provide support for it, and we strongly discourage its use. Problems caused by Automatix are often hard to track and solve, and it might sometimes be easier to !install a fresh copy of Ubuntu. See also !WorksForMe
[09:14] <crdlb> gyaresu__, that's compiz, not beryl
[09:14] <gyaresu__> Flannel: Thanks for the obvious.
[09:14] <crdlb> system>preferences>desktop effects
[09:14] <gyaresu__> crdlb: Thank you.
[09:14] <Davasaurous> I'm having some graphics issues, when I start up I just get a blank black screen. Started happening when I enabled my graphics card drivers. I can't use the GUI... Just wondering if anyone could help me either disable my drivers and get in or possibly update them from outside the GUI?
[09:14] <dbzdeath[lappy] > Flannel: would you happen to know the amount of size i can use for installing stuff?
[09:14] <Flannel> gyaresu__: don't use automatix.  Tell your friend (if it's a fresh install) that he should go ahead and reinstall, (and lose nothing but time) rather than having to later (and lose data and even more time)
[09:14] <Jordan_U> gyaresu__, Read the entire message from ubotu
[09:14] <Flannel> dbzdeath[lappy] : What do you mean?  size for what?
[09:15] <dbzdeath[lappy] > Flannel: well there has to be a limit to the amount of space that can be held in ram
[09:15] <gyaresu__> Jordan_U: I did. He doesn't care. He just wants to quickly see ubuntu with all the non-free progs... WinXP gut.
[09:15] <gyaresu__> s/gut/guy
[09:15] <n2diy> Davasaurous: try booting into text mode.
[09:15] <crdlb> gyaresu__, so you're going to show him how well ubuntu breaks when you use automatix?
[09:15] <Davasaurous> n2diy>	 And then?
[09:16] <Davasaurous> How do I boot to text mode?
[09:16] <Flannel> dbzdeath[lappy] : ah.  Well, that'd depend on the size of your RAM.  And, I really don't know how much memory the liveCD takes.  But it's not a whole lot.  You hsould be able to sneakernet in hostap-utils without any issues.
[09:16] <gyaresu__> crdlb: Yes.
[09:16] <Davasaurous> (I'm new, sorry >.<)
[09:16] <dbzdeath[lappy] > Flannel: even if i had 256m?
[09:16] <n2diy> Davasaurous: Re-state your problem.
[09:16] <crdlb> *sigh*
[09:16] <bryan> Jordan> seems youre right!
[09:16] <bryan> Is there nothing I can do to get OSX back on my Macbook>
[09:17] <disinterested> cool unrar works
[09:17] <bryan> seems like it shouldnt be so hard as it is!
[09:17] <yknott> Davasaurous: press ctrl+alt+f1
[09:17] <n2diy> Davasaurous: You should have boot options at the boot screen.
[09:17] <Davasaurous> Well, it was all working properly, but then I went into the destop effects and it asked me to enable my graphics card drivers, so I did so, then after a restart all I get is a black screen, nothing appears onscreen.
[09:17] <Flannel> dbzdeath[lappy] : Yeah.  I think you'll be ok.  Might be a little sluggish at times.  I really don't know how much it uses (well, except the installer needs 192MB, and that includes the Live environment).  I haven't used a liveCD in years.
[09:17] <yknott> Davasaurous: then ctrl+alt+f7 (or f8) to get back to X
[09:17] <dbzdeath[lappy] > Flannel: for using hostap all i would need is hostap-utils right? the rest should be in the modules?
[09:18] <Jordan_U> bryan, It seems to be a firmware problem, and despite what the people at Apple might tell you, I don't think that Ubuntu can cause the problems you are having
[09:18] <gyaresu__> crdlb: I'm using irssi under screen on urxvt from fluxbox. He is a supernerd who just wanted to see if linux had got to the point and click stage.
[09:18] <Jordan_U> bryan, And it's sort of a catch 22 because you need OSX to fix the firmware
[09:19] <mojtaba> salam
[09:19] <yknott> Davasaurous: so you could, in the terminal (text mode), reconfigure your xserver, if that is what you need   sudo dpkg-reconfigure xserver-xorg
[09:20] <Jordan_U> bryan, But I really recommend keeping OSx and dual booting, even if you don't use it ( next time you install ) if nothing else than for firmware updates that can only be installed through software update
[09:20] <Flannel> dbzdeath[lappy] : I'm not sure.  Lets take a look, (I'm looking here: http://packages.ubuntu.com/feisty/net/hostap-utils)  it's only dependency is libc6, which will already be there.  So yeah, you only need that package. (you can download it from that site too, the table at the bottom, pick your arch)
[09:20] <dbzdeath[lappy] > Flannel: yeah i already got it from a close mirror thanks anyways
[09:20] <Flannel> dbzdeath[lappy] : Also, if you have internet in the live environment, you can install it normally (thorugh apt-get).  I dont know if you need hostap-utils to get internet (I assumed yes)
[09:21] <dbzdeath[lappy] > Flannel: https://help.ubuntu.com/community/WifiDocs/Device/DWL-520vE1 if you're curious i'm trying to get that going but i'm talking a friend through it remotely who only has a wireless connection
[09:21] <Flannel> dbzdeath[lappy] : Right.  Sneakernet is the way to go.
[09:21] <dbzdeath[lappy] > Flannel: i have no idea what you mean by "Sneakernet"
[09:21] <bryan> Jordan> thats the funny part, Im an OSX user, and Linux is only used for messing around, and I always use it in Parallels, but a friend did a hard istall on my MB, (it was my bday, kind of a joke, we didnt expect this!!) so, i guess Im screwed for my deadlines tomorrow haha
[09:22] <bryan> rum and coke, here I come geez, 322am!
[09:22] <trisha> how to create a CD repository for an installer?
[09:22] <Flannel> dbzdeath[lappy] : Put [file]  on [physical medium] , and use your shoes (sneakers) to move it to the machine.   USB drive is usually easiest
[09:22] <dbzdeath[lappy] > Flannel: yeah or grab it from a windows partition
[09:22] <Jordan_U> dbzdeath[lappy] , https://help.ubuntu.com/community/WifiDocs/Device/DWL-520vE1 is very out of date
[09:23] <dbzdeath[lappy] > Jordan_U: i'm aware but there is nothing else i can find
[09:23] <dbzdeath[lappy] > Jordan_U: and the device doesn't work out of the box
[09:23] <dbzdeath[lappy] > Jordan_U: in windows it says revision E and not E1 .. so i'm not exactly sure if it's even relevant
[09:23] <Flannel> trisha: what are you trying to do ultimately? roll your own install CD?
[09:23] <dbzdeath[lappy] > they may be different
[09:24] <yknott> dividebyzerodeath[lappy] : had you tried the wrapper?
[09:24] <Jordan_U> dbzdeath[lappy] , What does it show up as in "lspci" ? That might be better info to google with
[09:25] <trisha> Flannel: its like i want to install a big program that required some packages in the internet.. and im not always offline..
[09:25] <yknott> Davasaurous: but i suspect it may be good to investigate the logs to find out what went wrong; look for errors in /var/log/Xorg.0.log
[09:25] <dbzdeath[lappy] > Jordan_U: it's been kinda hard to get info back and forth considering so i haven't got her to get that info as she has to literally write it down
[09:25] <trisha> Flannel:online i mean
[09:25] <Flannel> trisha: You might be interested in "apt on CD", which automates making CD repository things.  (It's on sourceforge)
[09:26] <UB`> Great Video http://www.ubuntuvideo.com/warning_a_linux_commercial
[09:26] <UB`> LOL
[09:26] <Jordan_U> !offtopic | UB`
[09:26] <ubotu> UB`: #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome!
[09:26] <UB`> ops sorry
[09:27] <trisha> Flannel: how should i do that in order to make it default installation/
[09:27] <Flannel> trisha: What do you mean?  You want to make a CD that comes with the stuff installed?
[09:28] <trisha> Flannel: i want to burn cd of all the program and packages needed
[09:28] <Flannel> trisha: Right.  Apt-On-CDwill do that, then you just pop the CD in, and it'll act like a repository, which you can then install stuff from
[09:29] <Flannel> trisha: just liek you're using the internet, only you're using a CD
[09:30] <trisha> Flannel: yah but is there a system of arrangement of burning those packages in the cd?
[09:30] <NForc3r> hey i need help with something
[09:30] <Jordan_U> trisha, Yes, aptonCD deals with that
[09:30] <Flannel> trisha: use aptOnCD (it's a program).  It automates the process.
[09:30] <NForc3r> with wine
[09:31] <NForc3r> is there a wine irc
[09:31] <Flannel> NForc3r: #winehq
[09:31] <NForc3r> thanx
[09:32] <trisha> Flannel: is that a terminal command or i still have to apt-get that command
[09:32] <NForc3r> no one is replying
[09:32] <trisha> ?
[09:32] <NForc3r> can u guys help me then
[09:33] <Flannel> trisha: it's a program.  I have no idea how you use it.  Hmm, looks like it's a GUI.  And actually, it's in the repositories.  `sudo apt-get install aptoncd` and you'll have it.  (it's in universe)
[09:34] <ostannar1>  trisha: http://onlyubuntu.blogspot.com/2007/04/create-backup-of-installed-packages.html
[09:35] <knoe> Hello guys. ive a realy big problem!!!!!!   i just downloaded an ubuntu image, booted from the cd with the image, looked for the install, saw that ubuntu doesnt "see" my raid, only the 2 seperate HDs, i thought, "hmmm, damn" and rebootet the system, to use my windows, for to look after a solution.
[09:35] <doms> hi to all people
[09:35] <knoe> the problem is, now the raid thing of the mainboard doesnt find the second disk!!!!!!!!!!!!!!!!!!!!
[09:35] <Jordan_U> trisha, sudo apt-get install aptoncd
[09:35] <doms> thanks GOD my ubuntu desktop is wonderful
[09:36] <knoe> could somebody help me please??!???
[09:36] <doms> anybody wants my screenshots
[09:36] <VERTiG0> doms, sure.
[09:36] <VERTiG0> mine is default and looks like garbage.
[09:37] <Jordan_U> !offtopic | doms
[09:37] <ubotu> doms: #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome!
[09:37] <knoe> ubuntu smashed my raid!!!
[09:37] <Davasaurous> Which driver does Ubuntu use by default? :\
[09:38] <Davasaurous> !!!
[09:38] <Davasaurous> YAY
[09:38] <Davasaurous> Thanks guys
[09:38] <Davasaurous> It's alive
[09:38] <knoe> my raid is gone. only after having a look into ubuntu live CD!!!!!!!
[09:38] <ostannar1> driver for what?
[09:38] <Davasaurous> Nevermind :p
[09:38] <Quaenorde> Question: Apparently, I have to 'comment out' two lines of /etc/modprobe.d/blacklist in order to get my wireless card recognized. I'm new to Linux, I have no clue how I go about this. The file itself is read-only, so I can't just delete the lines..any help? Also, isn't 'root' the super-admin user? I don't know what password goes with root- I just installed Fiesty 7.04..
[09:38] <Passa> i am having problems running audio problems simultaneously
[09:38] <Passa> such as rhythmbox and sauerbraten
[09:38] <doms> any good reason why filesystem of linux dont need to defrag
[09:39] <ostannar1> sudo gedit /etc/modprobe.d/blacklist, add # the beginnings of lines to comment them out, then save
[09:39] <knoe> cant anybody help me please????
[09:40] <Quaenorde> Thanks so much, ostannar1. Is this password required?
[09:40] <Passa> you need a password to access it as root, so yes
[09:40] <ostannar1> root pass should probable y be tha same as your normal user one
[09:40] <Jordan_U> knoe, Just booting the LiveCD doesn't do anything permanent to your PC, what did you do exactly?
[09:40] <Quaenorde> Thanks! I have to reboot into Ubuntu, so I'll report success or failure later.
[09:41] <Jordan_U> Passa, Does sauerbraten use OSS?
[09:41] <Passa> yep
[09:41] <Passa> well it seems to clash with rhythmbox anyway
[09:41] <bullgard4> lspci -vv prints: "0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRIV (ICH6 Family) SMBus Controller (rev 03)." Where is explained what domain=0000 means?
[09:41] <Jordan_U> Passa, Use aoss to get it to use ALSA
[09:41] <Jordan_U> !defrag | doms
[09:42] <ubotu> doms: defragmentation is not needed for Ext3 and ReiserFS filesystems. They are much more efficient in their allocation of storage units.
[09:44] <Passa> Jordan_U, how exactly do i do that?
[09:44] <alamin> mita
[09:45] <alamin> Hi!
[09:45] <plebian> hi alamin
[09:46] <Ind[y] > I tried many tricks found on the web but none worked; I can't stop the keyring manager asking for my network password each time.
[09:47] <Ind[y] > Can't I just uninstall the Keyring Manager?
[09:48] <roadkill> anyone know of a channel/server where i can talk to acer or about acer's laptops
[09:48] <ostannar1> /l
[09:48] <Ind[y] > I beg for help :/
[09:49] <n2diy> #acer    ?
[09:50] <roadkill> #acer failure
[09:51] <riw> Question: today I booted my ubuntu 7.04 and after trying to login, it gave an error about immediately closing (within 10 seconds). After hitting ctrl+alt+backspace I could log in, but nowsome things are weird. For instance, there are no icons in the main menu and the buttons (to close, maximize, etc.) on windows are not at the side of the bar, but are more to the left... any ideas what went...
[09:51] <riw> ...wrong and how to fix it?
[09:52] <nullkuhl> hello
[09:52] <nullkuhl> any one in here ?
[09:52] <roadkill> no
[09:52] <roadkill> lol
[09:52] <nullkuhl> lol
[09:52] <nullkuhl> dude i have just installed kda but whenever i try to launch the login manager from gnome i get this : GDM (The GNOME Display Manager) is not running.
[09:53] <nullkuhl> so how to run the gnome dp manager instead that of kde
[09:53] <roadkill> lol sorry man im a noob
[09:53] <nullkuhl> :s
[09:54] <roadkill> there are some good support guys here u just gota wait for them to aswer your question tho
[09:54] <paolo> another question: is there a "dhcp" option in ifconfig? or should i use something else?
[09:55] <plebian> paolo: what do you want to do w/ dhcp?
[09:55] <Passa> can anyone help me get sound to work with multiple programs using OSS sound?
[09:55] <leagris> Passa, OSS can't work with multiple programs unless your sound card has a hardware mixer. You will have to rely on a software mixer otherwise.
[09:56] <plebian> paolo: do you want your network interface to be a client? or something else?
[09:56] <riw> What is the space called that contains the application name and window-buttons?
[09:56] <paolo> plebian: yes. a client
[09:56] <dbzdeath[lappy] > Passa: are you using alsa's oss emulation by any chance?
[09:57] <dbzdeath[lappy] > Passa: and not actually oss
[09:57] <paolo> i want that its ip is dinamically assigned by the dhcp server
[09:57] <plebian> paolo: you can then use dhclient, try: sudo dhclient <network interface>
[09:57] <paolo> (i have a router)
[09:57] <paolo> plebian: ok, but is it possible to do the same with ifconfig?
[09:57] <Passa> no idea dbzdeath[lappy] 
[09:58] <plebian> paolo: as far as I know, ifconfig won't do dhcp
[09:58] <leagris> paolo, either you use the network manager and can set up dynamic assignment DHCP for the interface or you edit /etc/network/interface and put auto to the parameters for that interface.
[09:58] <paolo> ok thnks plebian
[09:58] <dbzdeath[lappy] > Passa: are you using what is default for ubuntu?
[09:58] <paolo> leagris: i don't want to use neither guis, nor config files
[09:58] <leagris> paolo running dhclient then
[09:59] <leagris> Passa, what audio application that use OSS are you requiering to run togather?
[10:01] <Xsylotte> help: http://paste.ubuntu-nl.org/26233/
[10:01] <leagris> Passa, either way if its for things like TeamSpeak (OSS only) or Enemy Territory OSS only or Skype or things like that, you can use esdsp or artsdsp or aoss to provide virtual OSS DSP interfaces for these programs to run togather.
[10:01] <Mazingaro> hi
[10:01] <Mazingaro> please I got a problem with lyx for ubuntu: xfig pictures are rotated of 90 degrees... :(
[10:03] <Xsylotte> anyone can help me ? :D
[10:03] <Xsylotte> http://paste.ubuntu-nl.org/26233/
[10:04] <Zoosh> hi, im a linux newbie and have a question: Is it possible to include another file in the fstab file ?
[10:04] <leagris> Xsylotte, version conflicts mostly relate to repository out of sync or outdated tier repos not updated
[10:04] <Zoosh> is there any command to include sth. ?
[10:04] <Xsylotte> so i need to wait.. :(
[10:05] <Xsylotte> any other statistical package for amd64 feisty ?
[10:05] <ostannar1> zoosh, no, just copy all the text you want into fstab
[10:05] <Jordan_U> Zoosh, You don't include files in fstab, you include information about partitions and how you want them mounted
[10:05] <leagris> Xsylotte, you can try other repos. Region specific repos may be out of sync some times
[10:06] <Zoosh> hm yes.. but it would be much easier (in my case), if it is possible to include a file with the fstab information =)
[10:06] <plebian> zoosh why don't you just put the info directly into fstab?
[10:07] <Zoosh> because i have some "basic mounts" and some, which are created by a script from time to time... i want to seperate them
[10:07] <Jordan_U> Zoosh, Just put a comment between them
[10:07] <Xsylotte> leagris: same, r-base is 2.5, but r-core is 2.4
[10:08] <Zoosh> hehe okay... so i will try to get all the information in the fstab file
[10:08] <Zoosh> thanks for your help
[10:09] <Jordan_U> Xsylotte, I just installed r-base successfully, on x86 though
[10:09] <leagris> Xsylotte, worked here http://paste.ubuntu-nl.org/26234/
[10:10] <Xsylotte> which repo ?
[10:10] <Xsylotte> fr
[10:10] <leagris> custom french repos from free.fr mirror
[10:11] <Xsylotte> leagris: can you give me specific url for that repo ?
[10:11] <leagris> Xsylotte, I'll paste my sources.list if that help you
[10:11] <Devyll> I have ubuntu installed on my laptop and after I installed Windows the boot program grub was replaced by the windows boot loader . How can I reactiveate grub ? (I am booting with other linux distribution)
[10:12] <leagris> Xsylotte, http://paste.ubuntu-nl.org/26235/
[10:13] <Jordan_U> !grub | Devyll
[10:13] <ubotu> Devyll: grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto
[10:13] <Xsylotte> sometimes i hate because i have amd64...grr
[10:14] <Xsylotte> lack of 64bit support :(
[10:14] <Jordan_U> Xsylotte, You might want to check if there is a bug on launchpad, and if not file one yourself
[10:14] <Xsylotte> i have to learn for my exam :D
[10:14] <Xsylotte> i need some statistical software :D
[10:15] <Passa> leagris, i couldnt find any of the packages you mentioned
[10:15] <leagris> Xsylotte, that's why I installed 32bit ubuntu despite my CPU is AMD64
[10:15] <Passa> and yes, what you were saying was what i was after :)
[10:16] <Xsylotte> leagris: is there some difference ?
[10:16] <Xsylotte> i mean..in speed, stability etc etc..
[10:16] <leagris> Xsylotte, much less trouble, and like between 5% and 10% speed difference overall
[10:16] <Xsylotte> hmmm...
[10:16] <Xsylotte> and then i always choose x86 packages?
[10:16] <leagris> Passa, what application are you trying to run with oss?
[10:17] <Passa> sauerbraten and rhythmbox for the moment, but i need stuff like enemy territory with teamspeak etc as well
[10:17] <leagris> Xsylotte, speed 5% to 10% less than 64bit. Reliability same, less trouble with 32bit only binaries like flashplayer and more support.
[10:18] <Xsylotte> umm :D
[10:18] <Xsylotte> nice
[10:18] <Jordan_U> Passa, Have you tried aoss ?
[10:19] <Devyll> Jordan_U .. "find /boot/grub/stage1" outputs "error 15: file not found"
[10:19] <leagris> Passa, a script I made to launch enemy-territory with oss http://paste.ubuntu-nl.org/26236/
[10:19] <Xsylotte> leagris: just one more question, if i install x86 ubuntu, then i choose x86 packages...right ?
[10:20] <leagris> Xsylotte, that's the default, x86 repos are used
[10:20] <Passa> Jordan_U, how do i get aoss?
[10:20] <Xsylotte> good :D
[10:20] <Xsylotte> brb...reinstalling file system :D
[10:20] <Xsylotte> hihihihi
[10:20] <Passa> leagris, but what about for sauerbraten etc?
[10:20] <Jordan_U> Passa, sudo apt-get install alsaplayer-oss
[10:20] <leagris> Passa, you can guess how to launch sauerbraten with artsdsp from my script
[10:21] <Jordan_U> Passa, Just run "aoss <command>" to run something with aoss
[10:22] <bullgard4> lspci -vv prints: "0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRIV (ICH6 Family) SMBus Controller (rev 03)." Where is explained what domain=0000 means?
[10:22] <leagris> Passa, as for using TeamSpeak, I plugged a pair of USB headphone because it load a separate hardware DSP from the USB stick and is much less trouble than software mixing sound espetially in CPU heavy game like World Of Warcraft though wine or cedega
[10:22] <paolo> another question: how can i save the new network configuration (done with ifconfig)?
[10:23] <ostannar1> paolo: you need to edit /etc/network/interfaces
[10:23] <Surkow> hello peeps
[10:23] <leagris> Jordan_U, aoss, artsd, esdsp are software mixers. Sometimes it is quite difficult to find proper settings for lattency, buffer... to have clean non laggy sound in games
[10:23] <paolo> ostannar1: is there a way to do it without editing the file?
[10:24] <ostannar1> system>administration>networking
[10:24] <paolo> ostannar1: and without using a gui?
[10:24] <ostannar1> not that i know of
[10:24] <Surkow> I still have network problems. I talked yesterday already in this channel about it. I have to integrated chips on my mobo and when I boot 50% chance that it malfunctions. If that happens I need to switch the cable to the other ethernet port
[10:25] <paolo> ok thnks ostannar1. and how can i stop/restart network services?
[10:25] <Surkow> I tried setting a static ip which worked for one day
[10:25] <ostannar1> sudo gedit /etc/network/interfaces lets you edit it in a text editor
[10:25] <Surkow> but today it no longer works
[10:25] <Surkow> and I had to switch again
[10:25] <ostannar1> /etc/init.d/service name stat/stop/restat
[10:26] <paolo> ostannar1: what's "name" for
[10:26] <paolo> ?
[10:26] <paolo> ethx ?
[10:26] <ostannar1> "service name"should be only one word, sorry
[10:28] <leagris> Surkow, look like a network device driver and interface name random assignment.
[10:29] <Surkow> you think it is?
[10:29] <Surkow> I tried lots of things already...should I just disable one device in the bios?
[10:29] <leagris> Surkow, it may, and assigning interface name at boot may help
[10:29] <Surkow> interface name? you mean eth0 and eth1?
[10:30] <sybariten> i connected a USB cabinet w/ harddrive to a ubuntu server before i left home
[10:30] <sybariten> whats the first thing i wanna do in order to check if the system sees it?
[10:31] <ostannar1> surkow: can't remember the details, but i think that you need to do something with udev config files
[10:31] <leagris> Surkow, yes
[10:31] <ostannar1> to tell udev what bus address should get what interface
[10:31] <Xsylotte> question: is there any cd/dvd burner for amd64 feisty ? (i can't set up burning speed with default one)
[10:31] <Surkow> ok I will look into the udev stuff
[10:32] <pwngasm> is there a tutorial showing how to do remote desktop over a network?
[10:33] <sybariten> pwngasm: can you do remote desktop over anything other than a network?
[10:33] <paolo> ok thnks for your support
[10:33] <leagris> Surkow, there is a file for that but forgot the name
[10:33] <Xsylotte> ??
[10:33] <Surkow> /etc/udev/udev.conf ?
[10:33] <aa^way> please any ftp? no commandline ftps or gFTP :(
[10:33] <Xsylotte> nothing.
[10:34] <ostannar1> Surkow: http://www.reactivated.net/writing_udev_rules.html
[10:34] <fstxx> what happpened to git config
[10:34] <Passa> wtf
[10:34] <Surkow> ah I found a dir with rules in the udev dir...let me see ostannar1 ..
[10:34] <leagris> aa^way, ncftp, lftp
[10:34] <Passa> Jordan_U, leagris, even after i close rhythmbox i dont get audio back in games
[10:34] <paolo> and how can i set a gateway for eth0 ?
[10:34] <brimu> hey I got some question, I'm pretty new to ubuntu
[10:35] <Jordan_U> brimu, Ask and you shall receive... an answer :)
[10:35] <snk00sj> goodmorning guys, everytime i want to start a connection ssh/https it takes about 5 seconds to start the connection, could anyone tell me where i could start debugging this ?
[10:35] <snk00sj> ping reply looks fine
[10:35] <brimu> I'm trying to back up data on a mounted disk, but I don't seem to be the owner and therefore don't have write access
[10:36] <Jordan_U> brimu, Do you know about sudo and / or is this an NTFS formatted drive?
[10:36] <NiKoJ> apps_xchat_xdcc_url_handler.schemas
[10:36] <brimu> yes I know a bit about sudo and it is an NTFS mounted disk
[10:37] <NiKoJ> gconf-schemas --register apps_xchat_xdcc_url_handler.schemas
[10:37] <alesan> hi
[10:37] <alesan> is there a list of supported hardware
[10:37] <alesan> I need to advice a USB 802.11 (wifi) adapter that works well in ubuntu
[10:37] <ostannar1> https://wiki.ubuntu.com/HardwareSupport
[10:38] <Jordan_U> !ntfs-3g | brimu
[10:38] <ubotu> brimu: ntfs-3g is a Linux driver which allows read/write access to NTFS partitions. Installation instructions at https://help.ubuntu.com/community/MountingWindowsPartitions
[10:38] <brimu> must ubuntu be installed in order for it to work?
[10:38] <brimu> cuz right now it's running off the RAM
[10:39] <Jordan_U> brimu, You can install it on a liveCD session if that is what you mean
[10:39] <Jordan_U> brimu, Yes
[10:39] <Jordan_U> brimu, Yes you can use it from the liveCD that is, bad wording :)
[10:40] <AaronCN> do I need to install anything to enable fluxbox-generate_menu, as I got command not found after install fluxbox. ?
[10:40] <brimu> hehe, ok let's get this started then
[10:40] <Passa> no one can help me? :(
[10:41] <Passa> !defrag | Passa
[10:41] <Passa> i want to see the defrag thing again :(
[10:41] <Passa> silly xchat
[10:41] <Jordan_U> Passa, You don't need to defrag, but if you must then install the package "defrag" read the warnings in the man page though
[10:42] <Passa> ah ok
[10:42] <Passa> what about my sound problem? i havent gotten audio back but i closed rhythmbox
[10:42] <Passa> it makes no sense?
[10:43] <insmod> you don't defrag linux lol
[10:43] <ompaul> those who defrag are not running GNU/Linux systems
[10:43] <wols> ompaul: you are mistaken
[10:44] <ompaul> wols, I'll rephrase
[10:44] <ompaul> those who defrag are mostly not running GNU/Linux systems
[10:44] <insmod> dunb
[10:44] <insmod> dumb
[10:44] <ompaul> in 10 years since my first install I never defragged ....
[10:44] <wols> almot any linux fs has a defrag program. and in the age of bittorrent it's needed
 11 yrs never
[10:45] <ompaul> and I used union fs before that ... (freebsd) ...
[10:45] <Jordan_U> _ADaRKnInJA, Yes, there are many ways of doing that, you can either install from some other media or use the *beta* windows installer wubi
[10:46] <insmod> wols: no and certainly not on a journal system
[10:46] <wols> insmod: why not?
[10:46] <Jordan_U> !wubi | _ADaRKnInJA
[10:46] <ubotu> _ADaRKnInJA: wubi is an unofficial Ubuntu installer for Windows users - more info is at http://www.cutlersoftware.com/ubuntusetup/wubi/en-US/index.html
[10:47] <wols> what has journalling to do with fragmentation?
[10:47] <insmod> wols: that is the point of a journal system it catalogues it
[10:47] <wols> huh?
[10:47] <alesan> insmod, !? what are you saying?
[10:47] <ompaul> wols,  http://www.linuxjournal.com/articles/lj/0105/6268/6268s1.html
[10:47] <wols> so you mean my ext2 has no "catalog"?
[10:47] <brimu> hey jordan
[10:48] <Jordan_U> brimu, Hi
[10:48] <segagman> ok so i have had xununtu on 1 of my rigs i got from my sister ..she got it from wally world it is/was a ol HP craper but any how i was goint to put reg ol ubuntu on it and now it wont read live cds or even winblowz i haved tryed every thing any ideads...i think its hardware
[10:48] <blackkky> can someone help me out?
[10:48] <insmod> wols: the filsytem handels the defragmentation an logs it
[10:48] <wols> ompaul: I know what a journalling fs is, but not how it relates to fragmentation
[10:48] <brimu> the package for ntfs-config couldn't be found
[10:48] <Jordan_U> _ADaRKnInJA, Look at the link from ubotu, and stop commenting using /me
[10:48] <brimu> i am running reisty
[10:48] <blackkky> configure: error: Please install Xmu libs
[10:48] <brimu> feisty
[10:48] <wols> insmod: is xfs a jorunalling fs in your book?
[10:48] <blackkky> and i did sudo apt-get install xmu-headers
[10:48] <Jordan_U> brimu, Enable universe
[10:48] <blackkky> what's the problem?
never used it sorry
[10:49] <brimu> how do i do that?
[10:49] <wols> insmod: do you know what spare files are?
[10:49] <Jordan_U> brimu, System -> Administration -> Software Sources
[10:49] <wols> erm, sparse files
[10:49] <segagman> when i boot it gos strait in to xubuntu
 in what way
[10:49] <brimu> gotcha
[10:50] <luca> ciao bella
[10:50] <segagman> i haved checked my cd-rom drives
[10:50] <segagman> put a bunch of dif drives in
[10:50] <wols> insmod: sparse files. look it up, it's quite a common term
 don't care really
[10:50] <wols> and the log of a journalled fs has nothing to so with fragmentation at all
[10:51] <luca> we are beatiful
[10:51] <wols> journalling only means the fs is always in a defined state and never "corrupts"
[10:51] <brimu> alright, it's going well now jordan
 in the 11 yrs i have used linux -- it doesn't get fragmented
[10:52] <segagman> so any ways thanks noone for the input its kool i figure it out...been reading linux in a nutshell
[10:52] <wols> any filesystem gets fragement if it's around >95% full. all of them. with bittorrent's swarm downloading this happens quite fast even
 you are misguided in your term -- i know there is a prog to do it but no one does
[10:52] <wols> some fs do an automatic defrag as part of the fs, but that's all you can do when it happens
 sorry no
[10:53] <insmod> read about it
 it is a win thing and win people seem to need it
[10:53] <insmod> sorry about your loss :)
[10:54] <wols> insmod: you are mistkan. I told you when it happens
[10:54] <brimu> jordan, i still don't have write access
[10:54] <brimu> i checked "Enable write support for external devices"
  i have searched my solaris my aix my bsd and no defrag
  what ever man
  whatever gets you through the day :)
[10:55] <ompaul> _ADaRKnInJA, ubotu is a bot
[10:56] <segagman> irc.freenode.org:6667   #linpeople  #debian #gentoo   #redhat #suse
[10:56] <_ADaRKnInJA> hehe :-))
[10:56] <_ADaRKnInJA> than answer you, please, OMPAUL
[10:57] <brimu> Jordan_U, you still there?
[10:57] <Jordan_U> brimu, Yes
[10:57] <brimu> i checked "Enable write support for external devices" but I still don't have write access
[10:58] <plebian> insmod: fragmentation can happen on unix systems too
[10:58] <plebian> insmod: as wols said, when you get your disk too full
[10:58] <l1un> What is different between aptitude and apt-get?
[10:58] <plebian> insmod: usually over 80%, but it will warn you if you get over 95%
[10:58] <_ADaRKnInJA> is the wuni, the same software than UBUNTU, at : http://www.cutlersoftware.com/ubuntusetup/wubi/en-US/index.html  ???
[10:59] <ompaul> _ADaRKnInJA, Ubuntu is an operating system, and it has 20,000 packages / programs or there abouts available, this wubi is a program for Windows, it is not
[10:59] <ompaul> _ADaRKnInJA, so it is not Ubuntu
[10:59] <Jordan_U> ompaul, Actually, wubi installs Ubuntu
[10:59] <Frogzoo> plebian: ext defaults to reserving 5% to handle frag, and that's enough
[10:59] <ompaul> Jordan_U, it is not ubuntu - it is an installer
[11:00] <plebian> frogzoo: yeah
[11:00] <Jordan_U> ompaul, Semantics
[11:00] <ompaul> Jordan_U, you are talking to a pedant ;-)
[11:00] <bharat862004> !ati
[11:00] <ubotu> To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto
[11:00] <ompaul> Jordan_U, not a very good one, but one none the less
 in 11 yrs never has tat happened
[11:01] <_ADaRKnInJA> ok, if it is an installer, it remains that I need to install AFTER it wubi, the UBUNTU ?
[11:02] <brimu> jordon_U, looks like first unmounting them and using the config tools worked
[11:02] <cjae_> why isn't my frostwire work with my wireless kb????/
[11:02] <crdlb> bharat862004, did you get an ati card?
[11:02] <brimu> thanks for you help
[11:02] <cjae_> working
[11:02] <bharat862004> crdlb: no
 and no it cant on a journal system
[11:02] <cjae_> it working on irc right now
[11:02] <Frogzoo> cjae_: completely unrelated issues - it's either your  network or it's frostwire
[11:02] <bharat862004> crdlb: no not yet
[11:02] <Frogzoo> cjae_: firewall?
[11:02] <crdlb> bharat862004, you're still planning on it?
[11:02] <bharat862004> crdlb: no
[11:02] <cjae_> Frogzoo,  wtf?????
[11:02] <bharat862004> crdlb: i already have nvdia fx 5200 card... i thought of upgrading... ;)
 i love it
[11:03] <bharat862004> crdlb: using that card from  past 6 months ;)
[11:03] <timtux> Does ubuntu 7.04 (the server edition) have any ftp client installed by default?
[11:03] <bharat862004> insmod: me too but cant play heavy games on it poor me ;)
[11:03] <Frogzoo> cjae_: does frostwire show your connection as firewalled?
[11:03] <kaolti> heya
[11:03] <varka> timtux: wget
 i don't do games lol :)
[11:04] <cjae_> Frogzoo, no
[11:04] <timtux> ftp server*
[11:04] <timtux> god damnit :P
[11:04] <cjae_> Frogzoo, wireless keyboard
[11:04] <Frogzoo> cjae_: are you using sun's java?
[11:04] <cjae_> why isn't my frostwire work with my wireless keyboard
[11:04] <bharat862004> crdlb: which card and model no u have ??
[11:05] <kaolti> can anyone explain how the system->preferences->network proxy works?
[11:05] <crdlb> bharat862004, I have an old ati radeon 7500 (which uses different drivers from new ati cards)
[11:05] <rickyrich> hi, I use a pci tv card and with tvtime: it's working great but  I have a problem: when I run ubuntu and also my usb webcam it's plugged, tvtime software try to open the webcam and not  the tv card, and so to run correcly the pci tv card, first I must unplug my usb webcam, after run ubuntu, and then i can use correctly tvtime with my pci tv card
[11:05] <Frogzoo> kaolti: it points to your lan's web proxy
[11:05] <bharat862004> crdlb: how is that running ?
[11:05] <crdlb> bharat862004, great
[11:06] <kaolti> Frogzoo: i want to set a proxy for the whole system
[11:06] <crdlb> but it's using the open source driver, not the official proprietary ati driver
[11:06] <Frogzoo> kaolti: what's to know? if you use a proxy, you configure it
[11:06] <ruben_> what is the way to extrac all login system acces?
[11:06] <wols> bharat862004: if you want to do 3D stuff under linux, don't get an ati
[11:06] <bharat862004> crdlb: different ati cards have different drivers ????
[11:06] <kaolti> Frogzoo: i want to use proxy with programs that dont have such options
[11:06] <bharat862004> wols: that is wat crdlb said me ;)
[11:06] <kaolti> Frogzoo: i thought i can do that with that option
[11:06] <wols> ati doesn't support cards older tzhan radeon 9500 anymore
[11:07] <wols> which means you have to use an open source driver for them which is less optimized
[11:07] <bharat862004> crdlb: what u mean by using open source driver ??? and not ati drivers ??
[11:07] <crdlb> wols, the open source driver is much better
[11:07] <crdlb> even if it's slower
[11:07] <kaolti> Frogzoo: can i?
[11:07] <wols> crdlb: no. it's sloewr usually. even if it's probably much more stable
[11:08] <rickyrich> how can i do to write that tv time must use first the pci tv card?
[11:08] <crdlb> wols, true, but it also support AIGLX
[11:08] <bharat862004> wols: crdlb but ati cards always support better pixel shaders and latest technology then the nvidia card....
[11:08] <ostannar1> ***_ADaRKnInJA: wubi is a windows program that installs ubuntu for you
[11:08] <wols> rickyrich: just make sure you load the driver for the pci card before the webcam ones. e.g. /etc/modutils/
[11:08] <wols> doh. /etc/modules
[11:08] <Frogzoo> kaolti: not like that, no
[11:09] <wols> bharat862004: wrong
[11:09] <kaolti> Frogzoo: any way to that?
[11:09] <rickyrich> wols: ok thanks i'll try now
[11:09] <kaolti> Frogzoo: iptables?
[11:09] <bharat862004> crdlb: that is why i was going for ati graphics card ;)... already searched lot on net
[11:09] <crdlb> bharat862004, the proprietary ati drivers are so terrible that if you tested equal nvidia and ati cards on linux, the ati card would be 50% slower
[11:09] <bharat862004> wols: u r wrong dude
[11:09] <wols> bharat862004: it took for example ati half a year longer to get pixelshader 4.0. their cards are just now showing up
[11:09] <wols> also, pixelshader 3.0 and the x800 series was the same story afaik
[11:10] <bharat862004> wols: crdlb  even the lower version of ati graphics support technology which are suppoorted by nvidia latest graphics card
[11:10] <Frogzoo> kaolti: maybe, with some fiddling, you might use iptables to redirect to a proxying application on the box
[11:11] <bharat862004> wols:  did lot of research on it ;)
[11:11] <wols> bharat862004: what version? no current at card except the vrey entry ones comparab le to your fx5200 support aiglx btw
[11:11] <kaolti> Frogzoo: thanks
[11:11] <wols> bharat862004: if you did research you can cite refrences. where are they?
[11:11] <_ADaRKnInJA> Are there an expert of UBUNTU ... ONLINE, just now ?
[11:12] <wols> !ask | _ADaRKnInJA
[11:12] <ubotu> _ADaRKnInJA: Don't ask to ask a question. Just ask your question :)
[11:12] <Frogzoo> _ADaRKnInJA: no experts here, 1000 noobs though
[11:13] <_ADaRKnInJA> Ive made the questions, And none answers :-))
[11:13] <bharat862004> i googled many many sites including nvidia and ati... and compared different card and different card versoin with different technologies released by both the company and i had thought of buying ati x1600 which was in my budget but crdlb told dont buy ati so dropped the idea of buying the ati card... :(
[11:13] <wols> _ADaRKnInJA: people already answered you several times. they can't help it if you are unable to understand
[11:13] <Jordan_U> _ADaRKnInJA, Then nobody knows :)
[11:14] <bharat862004> wols: read the above lines ;)
[11:14] <wols> bharat862004: how much does a x1600 cost where you are?
[11:14] <bharat862004> wols: india
[11:14] <wols> bharat862004: that is no reference. it's no argument
[11:15] <bharat862004> wols: i know that but i googled and asked a lot in forums... and nearby dealers man... i know their cant be proper argument without proof :(
[11:15] <Jordan_U> bharat862004, Good, you saved yourself a lot of trouble :)
[11:15] <_ADaRKnInJA> ok, another misunderstood answer, with none about I invited ....
[11:15] <wols> bharat862004: http://www.theregister.co.uk/2004/05/04/ati_confirms_no_shader_3/ for example
[11:15] <RAOF> _ADaRKnInJA: I haven't seen your question.  What was it?
[11:16] <bharat862004> Jordan_U: i am not sure about that yet ;)
[11:16] <_ADaRKnInJA> please SCROLL UP
[11:16] <wols> bharat862004: also the gf8800 DirectX10 cards (pixelshader 4.0) came out last november. ati directx10 cards came out this month. they are showing up in retail the last few days
[11:16] <bluebanana> how do i copy the DVD in my disc-drive to my hard drive?
[11:16] <Jordan_U> bharat862004, Also the fact that they still don't support texture-from-pixmap and the fglrx drivers prevent me from using suspend on my laptop
[11:16] <wols> bharat862004: dd if=/dev/dvdrom of=/file/on/disk
[11:16] <EmoDirk> Don't kick me, this isn't spam, I want to tell people about a very dangerous cult that is taking away our rights.  http://toddpartridge.wordpress.com/searchlight-code/
[11:17] <Frogzoo> bluebanana: sudo dd if=/dev/dvd of=blah.iso bs=1000000
[11:17] <bharat862004> wols: what is this < dd if=/dev/dvdrom of=/file/on/disk > ???
[11:17] <wols> _ADaRKnInJA: wubi is an installer for ubuntu that isntalls via starting it from windows
[11:17] <wols> bharat862004: sorry. was for bluebanana. same letter b
[11:18] <Sepero> bluebanana: You can do a bit-4-bit copy with a command like this: /dev/dvd > /home/me/file.iso
[11:18] <RAOF> _ADaRKnInJA: I can't scroll up.  I've only just joined.
[11:18] <bluebanana> what is 4 bit?
[11:18] <phpcurious> hi
[11:18] <phpcurious> i have a problem
[11:18] <bluebanana> oh, bit for bit
[11:18] <bluebanana> after the iso is on my hard drive, how do i view the movie?
[11:18] <Sepero> bluebanana: I just mean a raw copy.
[11:18] <phpcurious> i don't remember providing my own ubuntu a password but i do know i made a new username
[11:18] <bharat862004> wols: that is for x800 pro graphics which is pretty old
[11:18] <bluebanana> Sepero, i understand
[11:19] <Frogzoo> Sepero: cat works just as well as cat ? hmmm
[11:19] <phpcurious> what should i do to recover that password?
[11:19] <Frogzoo> Sepero: cat works just as well as d ? hmmm
[11:19] <Frogzoo> Sepero: cat vs dd ?
[11:19] <Jordan_U> !iso | bluebanana
[11:19] <ubotu> bluebanana: To mount an ISO disc image, type  sudo mount -o loop <ISO-filename> <mountpoint>  - There is a list of useful cd image conversion tools at http://wiki.linuxquestions.org/wiki/CD_Image_Conversion - Always verify the ISO using !MD5 before !burning.
[11:19] <Jordan_U> !dvd | bluebanana
[11:19] <rickyrich> wols: i have done and restart but it's the same
[11:19] <wols> bharat862004: geforce8800 is pretty new. available since last november. ati's is only available since last week or so
[11:20] <bharat862004> wols: their is lot more improvement after that ;)
[11:20] <bluebanana> Jordan_U, i don't plan on burning the iso
[11:20] <ubotu> bluebanana: For playing DVD, see http://help.ubuntu.com/ubuntu/desktopguide/C/video.html - "libdvdcss2" can be found at http://wiki.ubuntu.com/SeveasPackages - Try k9copy (available in !Universe) for backing up DVDs
[11:20] <Frogzoo> Sepero: on 2nd thoughts, you really want to use dd, not cat
[11:20] <Jordan_U> _ADaRKnInJA, Yes
[11:20] <Sepero> Frogzoo: Yeah, cat can work. I forgot to put cat in the command though :)
[11:20] <rickyrich> I must do that ubuntu first run the tv card and after the webcam
[11:20] <Jordan_U> _ADaRKnInJA, Why do you comment with /me ?
[11:20] <bharat862004> wols: releasing date dont affect the issue :)
[11:20] <wols> bharat862004: and you said ati always had the better tech, which is just not true
[11:20] <rickyrich> now it's the reverse and tv time try to open the webcam first :(
[11:21] <wols> bharat862004: why not? last christmas there was no DX10 card from ati but there was from nvidia for example.
[11:21] <Sepero> bluebanana: I meant: cat /dev/dvd > /home/me/file.iso
[11:21] <bharat862004> wols: the problem with ATI people is that they never show off like Nvidia people... less publicity for ati cards
[11:22] <wols> bharat862004: wrong. back when the ati radeon9700 was around and nvidia came out with the fx cards (one of those you have), then ati was MUCH, much better. sometimes one is in front sometimes the other
[11:22] <pwngasm> is there a tutorial showing how to do remote desktop over a network between 2 ubuntu computers?
[11:22] <wols> what alswas was the same however is that ati's driver was worse. especially under linux and opengl
[11:23] <Gerrit> Hello, when I run kdvi, I get a warning on the commandline: "QApplication::notify: Unexpected null receiver". How can I solve this?
[11:23] <Sepero> ubotu: rdp | Sepero
[11:23] <gordonjcp> don't run it from the command line
[11:23] <Jordan_U> bluebanana, There is no argument about ATI's Linux support, it is so poor that I can guarantee you that any ATI card that performs the same on windows as an nvidia card will be absolutely dwarfed by the same nvidia card when both are being run from Linux
[11:23] <bharat862004> wols: ati cards are good........ but only the drivers $ucks... when proper drivers are ready.... they will kick nvidia A$$
[11:23] <wols> bharat862004: unfortunately there never was a proper ati driver... especially not for linux
[11:24] <wols> not ever
[11:24] <sivaji> bharat862004 u r an indian right
[11:24] <bluebanana> Jordan_U, you meant to get bharat862004 's attention, not mine, on ATI
[11:24] <pwngasm> has anyone used the newest open source ati drivers?
[11:24] <bharat862004> bluebanana: yes he's on me
[11:24] <Jordan_U> bluebanana, Oh, sorry, probably better not to get into this discussion anyways :)
[11:24] <liquiddoom> !raid
[11:24] <ubotu> Raid and LVM --> very easy guide for alternate CD : http://users.piuha.net/martti/comp/ubuntu/raid.html Tips and tricks for RAID and LVM can be found on https://help.ubuntu.com/community/RaidConfigurationHowto and http://www.tldp.org/HOWTO/LVM-HOWTO
[11:24] <bharat862004> sivaji: yes
[11:24] <wols> _ADaRKnInJA: no.
[11:24] <pwngasm> is there a tutorial showing how to do remote desktop over a network between 2 ubuntu computers?
[11:25] <bluebanana> what video codec is recommended (in ripping a DVD movie)?
[11:25] <wols> bluebanana: ripping to what?
[11:26] <pwngasm> bluebanana: divx is always good
[11:26] <wols> pwngasm: no it's not.
[11:26] <kane77> what laptops have good hardware support in linux? I'm planning to buy some cheaper HP...
[11:26] <Sepero> _ADaRKnInJA: no
[11:26] <wols> kane77: thinkpads for example
[11:26] <bluebanana> the choices that a program gives me are: xvid, xvid2, xvid3, xvid4, ffmpeg, fame, af6, divx4, divx5
[11:26] <Jordan_U> kane77, Dell sells a laptop with Ubuntu pre-installed
[11:26] <ion_bidon> hello; anyone knows the anonymous user/password on windows shares ?
[11:26] <bluebanana> wols, ripping a DVD movie to my hard drive
[11:26] <eliaswimmer> jup sitting here in front of a t60
[11:26] <bluebanana> pwngasm, divx is good why?
[11:26] <phpcurious> ahhh thanks
[11:26] <bluebanana> divx is better than xvid?
[11:26] <bharat862004> Jordan_U: as i already said its becoz they dont have good linux drivers :)
[11:26] <wols> bluebanana: xvid4, or ffmpeg (ffmpeg has support for many different codecs)
[11:26] <_ADaRKnInJA> ok, if NO ,,, why must I install the wubi beta, instead...???
[11:26] <phpcurious> thanks so much you're a life saver!
[11:26] <wols> bluebanana: that doesn't answer my question
[11:26] <bluebanana> wols, is xvid4 better than xvid?
[11:26] <liquiddoom> pwngasm: It's built in. Just change your remote desktop preferences to enable it and then use the "terminal server client" to connect (remember to select VNC under protocol)
[11:26] <Jordan_U> bharat862004, Yes, that doesn't make them any less of a PITA for me :)
[11:26] <bluebanana> wols, i don't understand your question.
[11:26] <bluebanana> i'm a newbie
[11:26] <wols> you can rip a dvd to mpeg2 again (for reduction in size so it fits on a 4.7GB dvd for example), or you can rip it to avi
[11:27] <CppIsWeird> i booted ubuntu 7.04 in Microsoft Virtual PC 2007, and the mouse doesnt work
[11:27] <wols> _ADaRKnInJA: yes. how do you connect to the internet?
[11:27] <kane77> Jordan_U, wols, I'm planning to run only ubuntu on there because I found that it got what I need...
[11:27] <wols> _ADaRKnInJA: via wired router?
[11:27] <Jordan_U> CppIsWeird, Try Vmware, they actually actively support Linux guests
[11:28] <wols> Jordan_U: latest VPC supports linux afaik. but of course only SuSE :)
[11:28] <liquiddoom> !raid0
[11:28] <ubotu> Sorry, I don't know anything about raid0 - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[11:28] <Jordan_U> wols, With 2D acceleration and the whole shebang?
[11:28] <bharat862004> crdlb: from where did u get ur open source driver for ati cards ??
[11:28] <liquiddoom> !softwareraid
[11:28] <ubotu> Sorry, I don't know anything about softwareraid - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[11:28] <wols> Jordan_U: what acceleration?
[11:28] <Jordan_U> !raid | liquiddoom
[11:28] <ubotu> liquiddoom: Raid and LVM --> very easy guide for alternate CD : http://users.piuha.net/martti/comp/ubuntu/raid.html Tips and tricks for RAID and LVM can be found on https://help.ubuntu.com/community/RaidConfigurationHowto and http://www.tldp.org/HOWTO/LVM-HOWTO
[11:28] <Sepero> _ADaRKnInJA: You can install wubi without burning it to a CD/DVD.
[11:28] <_ADaRKnInJA> my internet is a BROADBAND direct and 4MEGA velocity
[11:28] <crdlb> bharat862004, it comes with ubuntu, but it only support old cards
[11:29] <julle_> is there anyone that have had problem problems with ntfs-3g that files have been corrupt or stuff like that, or is that program save to install on your ntfs disks?
[11:29] <bharat862004> crdlb: ok sir ;)
[11:29] <crdlb> bharat862004, it has absolutely no support for the X1600 for example
[11:29] <bharat862004> crdlb: hmm
[11:29] <wols> _ADaRKnInJA: I did not ask you that. I want to know if you use a router or use pppoe or what?
[11:29] <Jordan_U> wols, vmware-tools provides *2D* acceleration with Linux guests
[11:30] <Jordan_U> julle_, It is very safe
[11:30] <wols> bharat862004: for ati x1600 there are only two drivers: vesa and fglrx from ati
[11:31] <Quanorde> If Ostannar1 is around/not idle - thanks for the help. I'm online with Ubuntu now. <3
[11:31] <_ADaRKnInJA> PPPOE - WAN PORT
[11:31] <bharat862004> i'm using ubuntu 6.06 version how do i start net connection... coz i need to restart my system after getting switching on my dsl modem and then restart my ubuntu to get my net work... what to do ??
[11:31] <bharat862004> wols: k
[11:31] <wols> _ADaRKnInJA: then wubi might not work so well. dunno if it can deal with pppoe directly
[11:31] <rickyrich> wols: how can i do?
[11:32] <wols> bharat862004: what net connection? what do you use exactly?
[11:32] <bharat862004> wols: broadband
[11:32] <Jordan_U> wols, For the most part wubi is just like a regular Ubuntu installation
[11:32] <wols> bharat862004: do you use ppp via pppoe?
[11:32] <julle_> Jordan_U, ok thank you
[11:32] <wols> Jordan_U: doesn't it download the stuff over the network? how big is the wubi isntaller?
[11:32] <Jordan_U> julle_, Also, in case you didn't know, install ntfs-config to set it up automatically with a GUI
[11:33] <bharat862004> wols: dont know which one :(
[11:33] <wols> bharat862004: are you currently in windows or ubuntu?
[11:33] <Jordan_U> wols, I don't know, I have never used it myself as I don't own windows :)
[11:33] <bharat862004> wols: i am in mandriva
[11:33] <Quanorde> What command in the terminal can you use to delete files as root?
[11:33] <bharat862004> wols: i have both mandriva and ubuntu
[11:33] <Jordan_U> Quanorde, sudo rm /path/to/file
[11:34] <bharat862004> wols: and windows :)
[11:34] <Sepero> Quanorde: sudo rm file
[11:34] <Quanorde> Thank you.
[11:34] <oem> My firefox is very slow to start up ... why is this?
[11:34] <wols> Jordan_U: from what I know it's only the bootfloppies basically which are done via windows sorta. which means the base isntall even has to be downlaoded via internet. and when ppp or wlan and not a normal enterhent connection is used, this usually fails
[11:34] <julle_> Jordan_U, thank you very much for that tip!
[11:34] <wols> bharat862004: ps aux |grep ppp
[11:34] <wols> bharat862004: as root
[11:34] <Jordan_U> julle_, np :)
[11:35] <wols> oem: how slow? in what way?
[11:35] <vladuz976> is there a package for java run time environment?
[11:35] <oem> It takes a long time to launch.  after that it's normal
[11:35] <oem> vladuz976: ubuntu-restricted-extras on 704
[11:35] <bharat862004> wols: what command is that ??? here is the output  < root      6695  0.0  0.1   2912   732 pts/1    R+   15:20   0:00 grep --color pp                               p
[11:35] <bharat862004>  >
[11:35] <vladuz976> oem: thanks
[11:35] <Sepero> vladuz976: yes
[11:36] <vladuz976> Sepero: what's the name of the package?
[11:36] <sybariten> so whats the most natural way of checking if a "USB HD" has been found by tha system?  (external cabinet)
[11:36] <Quanorde> And what command is it to remove a directory?
[11:36] <Sepero> vladuz976: apt-cache search sun jre
[11:36] <oem> sybariten: dmesg | tail
[11:36] <sybariten> ive checked dmesg but the output isnt very exciting
[11:36] <bharat862004> wols:  ???
[11:36] <sybariten> from a disk point of view
[11:36] <Surkow> ok guys I'm now trying to create a rule in udev to see if that fixes my internet problem. I create a file called 10-local.rules in /etc/udev/rules.d with the following content:
[11:36] <Surkow> KERNEL=="eth0" ATTR{address}=="00:15:f2:8a:17:8f" NAME="lan"
[11:36] <rickyrich> I'll try again to post my problem: I have a tv card and i'm using tvtime, when i run ubuntu, if my webcam it's plugged tvtime automacally try to open the cam so to run correctly  tvtime using the tv card first to run ubuntu i must fisically unplug the cam, any help?
[11:37] <Sepero> vladuz976: If nothing comes up, then you need to enable more repositories.
[11:37] <bharat862004> wols: do u want me to boot into ubuntu ??
[11:37] <vladuz976> Sepero: thanks, found it
[11:37] <sybariten> oem: well, it says something about seeing the USB connection, which i guess is an answer to what i asked... but what i really meant was, is ther a good way of seeing what device i should mount it as?
[11:37] <qnyc> Quanorde, if it's empty, rmdir, if it's not, rm -rf
[11:38] <Sepero> vladuz976: welc :)
[11:38] <Surkow> @rickyrich - it probably handles both devices the same and it sees the webcam earlier
[11:38] <Quanorde> Thank you, qnyc.
[11:38] <wols> bharat862004: no. also: is this problem with you having to restart to make DSL work happening with mandriva?
[11:38] <Surkow> I don't have much knowlegde about it
[11:38] <pconda> guys I have a external usb drive and i can't move a folder into it
[11:38] <pconda> can someone help a complete neub
[11:38] <Sepero> Surkow: So does your rule work ok?
[11:38] <dimebar> pconda: does it give an error message?
[11:38] <pconda> yea
[11:38] <Sepero> pconda: yes
[11:38] <pconda> it says
[11:38] <Surkow> I'm didn't yet activate it :p
[11:39] <bharat862004> wols: not at all,,,, when i switch on my modem it automatically connect to net in mandriva... but in ubuntu i have to do something... like netstat
[11:39] <Surkow> * I'm =I
[11:39] <pconda> dimebar: it says something about permissions
[11:39] <Surkow> @ Sepero - I'm going to try it now
[11:39] <pconda> dimebar: i also checked online and it tells me to right click it
[11:39] <pconda> but then it tells me i can't change permissions unless i am the root
[11:39] <Surkow> how should I restart udev rules? just reboot?
[11:39] <wols> bharat862004: netstat? you sure about that command?
[11:39] <dimebar> pconda: try changing the permissions using 'gksudo nautilus'
[11:40] <oem> Surkow: /etc/init.d/udev restart
[11:40] <Sepero> Surkow: ok
[11:40] <wols> pconda: mount. run it. what does it say about that drive?
[11:40] <Surkow> thanks oem
[11:40] <bharat862004> wols: hey that not a command......... ok wait let me boot into my ubuntu.... will be back :)
[11:40] <Sepero> Surkow: I might suggest: KERNEL=="eth0", ATTR{address}=="00:15:f2:8a:17:8f", NAME=="lan"
[11:40] <hrehf_> hi - hm, my hd with the linux partitions is dieing - what's the best way to back up and recover (i can still read from it) ?
[11:41] <Surkow> @ Sepero - I see...you added the ','
[11:41] <oem> hrehf_: cp -ra or dd
[11:41] <daniel_washere> When i try to run an opengl app ive compiled i get the error:  " OpenGL GLX extension not supported by display ':0.0'"
[11:41] <daniel_washere> I have glx in my xorg.conf file.
[11:41] <Sepero> Surkow: and I made all "=="
[11:41] <oem> daniel_washere: glxinfo | grep rendering
[11:41] <Quanorde> And hopefully my final question- where can I go/how do I change the permissions for hard drives for non-root users? They don't show under gksudo nautilus...
[11:41] <Changlinn> anyone know what needs to be done to get ubuntu booting on a sata disc when it was installed on an ide, I have just ghosted between the two discs then, changed device.map to: (hd0)   /dev/sda
[11:41] <hrehf_> oem, what does that do?
[11:41] <Surkow> ok
[11:41] <wols> daniel_washere: what video driver?
[11:41] <oem> hrehf_: read manual pages.
[11:42] <daniel_washere> oem: whole bucnh of Xlib:  extension "GLX" missing on display ":0.0".
[11:42] <fjperez> busco novia
[11:42] <oem> Changlinn: just install grub.  grub-install
[11:42] <daniel_washere> bunch*
[11:42] <daniel_washere> Nvidia
[11:42] <oem> daniel_washere: what vid card / driver?  obviously it's not working
[11:42] <pconda> nautilis says read only
[11:42] <wols> Changlinn: reinstall grub, change menu.lst and fstab
[11:42] <daniel_washere> its 6800GT with normal ubuntu drivers, when i try to install nvidia ones xserver always fails
[11:42] <fjperez> ke pasa
[11:42] <wols> daniel_washere: nvidia driver? dpkg -l |grep nvidia
[11:42] <Changlinn> oem: did a grub-install /dev/sda6 no go
[11:42] <Surkow> @ Sepero - It still seems to work
[11:42] <wols> daniel_washere: you must have nvidia drivers
[11:43] <Changlinn> oem: have already changed fstab too
[11:43] <Quanorde> N/m, I found it under /media/.
[11:43] <Surkow> I think rebooting will show if I keep having that problem
[11:43] <Surkow> brb
[11:43] <oem> Changlinn: you need to get the discs however they're going to be in the final setup before you run grub-install
[11:43] <Sepero> Surkow: Ok :)
[11:43] <daniel_washere> i have nvidia-glx, nvidia-glx-new and nvidia-kernel-common
[11:43] <wols> Changlinn: no go in what way? is sda6 set as bootable in the MBR?
[11:43] <fjperez> vete ala puta mierda
[11:43] <hrehf_> oem with a hd that's sounds like it's dieing, i have limited time ;). What parts ofthe installation do i cp though? how do i restore a bootable system from the backup after that?
[11:43] <Sepero> hrehf_: I can help you out. /join #sepero
[11:43] <linux_probe> think ubuntu 7 falsely labels all drives as SDA -Z now
[11:43] <wols> daniel_washere: you also need the nvidia kernel module
[11:43] <wols> !nvidia | daniel_washere
[11:43] <Changlinn> wols: I would imagine so, I just ghosted between the two
[11:43] <daniel_washere> restricted modules?
[11:43] <ubotu> daniel_washere: To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto
[11:44] <linux_probe> make sure it's pointed to the right drive and letters
[11:44] <fjperez> NO MARICON
[11:44] <fjperez> HGFIHGY
[11:44] <wols> Changlinn: don't imagine. check. what happens when you boot?
[11:44] <fjperez> NVHGBVF
[11:44] <Changlinn> if I boot with just the sata disk, it fills the screen with grub.....
[11:44] <pconda> i think i have to do something like mounting it with ntfs-3g
[11:44] <oem> hrehf_: Can't you just copy your homedir ?
[11:44] <wols> !ntfs-3g < pconda
[11:44] <oem> hrehf_: dpkg --get-selections|awk '{print $1}'|tr '\n' ' ' <-- that will print every installed package
[11:44] <dimebar> pconda: if you press alt+f2 then type 'gksudo nautilus' it will prompt you for password; you should then be able to change permissions on the drive
[11:44] <wols> !ntfs-3g > pconda
[11:44] <fjperez> COPMO ERES
[11:44] <oem> hrehf_: might also backup /etc/
[11:44] <pconda> dimebot: i added this line /dev/sda2   /media/sda2   ntfs-3g  defaults,locale=en_US.utf8    0    0 to it
[11:44] <wols> dimebar: he cannot change perms on a ntfs drive
[11:44] <_ADaRKnInJA> bye... many thank you... ALLL
[11:45] <dimebar> wols: ah ok
[11:45] <Quanorde> Okay. I've got my hard drive partitioned- one for root/boot info, one for data, but it's saying my data partition is read-only & I can't change the permissions...Any ideas? It's ext3.
[11:45] <fjperez> SOY UN VASILETE
[11:45] <dbzdeath[lappy] > i just added myself to a group how do i update the change?
[11:45] <fjperez> UN FOLLADOR
[11:45] <pconda> dimebar: it says it a read only disk
[11:45] <Changlinn> Quanorde: sounds like it has mounted read only happens on faulty boot
[11:45] <wols> !ops fjperez is trolling
[11:45] <bobo-tha-clown> anybody used freeradius on ubuntu?
[11:45] <pconda> !ntfs-3g
[11:45] <ubotu> ntfs-3g is a Linux driver which allows read/write access to NTFS partitions. Installation instructions at https://help.ubuntu.com/community/MountingWindowsPartitions
[11:46] <hrehf_> oem, thank you
[11:46] <fjperez> ESCRIBE ESPANOL NO INGLEDS
[11:46] <elkbuntu> !es | fjperez
[11:46] <Quanorde> Changlinn = So, a reboot would fix it, or a reinstall, or what? It's the same partition as my boot, should I make changes to something via a live CD?
[11:46] <ubotu> fjperez: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[11:46] <Quanorde> Not partition- harddrive. Sorry.
[11:46] <Changlinn> Quanorde: a reboot should fix it
[11:46] <oem> hrehf_: glad to help
[11:47] <Quanorde> Changlinn = Ok. Will try it. Thanks.
[11:47] <Changlinn> Quanorde: the whole drive is read only? backup...
[11:47] <Changlinn> ah too late
[11:47] <fjperez> DE DONEDE ERES
[11:47] <oem> !xfs
[11:47] <ubotu> xfs is a high-performance journaling filesystem originally developped by Silicon Graphics for their IRIX OS. It is now fully supported by Linux so you can install Ubuntu on it if you wish. More info at http://en.wikipedia.org/wiki/XFS
[11:47] <moose> hallo
[11:47] <Changlinn> !reiserfs
[11:47] <ubotu> reiserfs is a journalling file system, in benchmarks it outperforms many others on I/O operations, but they take notoriously long to mount.
[11:47] <Hobbsee> !es > fjperez
[11:47] <oem> xfs pwns
[11:48] <Changlinn> oem: agreed, reiser has its place... the homcidal fs
[11:48] <alesan> !es
[11:48] <ubotu> Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[11:48] <bobo-tha-clown> !freeradius
[11:48] <ubotu> Sorry, I don't know anything about freeradius - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[11:48] <oem> I believe suse switch to a different default since reiser is on trial
[11:48] <alesan> Changlinn, I thought Reiser was declared innocent or something
[11:49] <Changlinn> oem: serious? I thought he got convicted, no more trial
[11:49] <oem> he's on trial now
[11:49] <oem> ... well I dunno.  *last I read* he was on trial
[11:49] <alesan> didn't they find the loveer of the ex wife was a serial killer?
[11:49] <elkbuntu> please leave the reiser discussions now
[11:50] <alesan> elkbuntu, why?
[11:50] <oem> Trial is delayed until fall.  news.google.com knows all
[11:50] <oem> back later..
[11:50] <oem> shutdown -r now
[11:50] <wols> alesan: OT
[11:50] <Changlinn> are fair enough
[11:50] <Changlinn> so anyway...
[11:50] <elkbuntu> alesan because this is a support channel, not a trashy gossip channel
[11:51] <dbzdeath[lappy] > Changlinn: don't you have any idea of the concept of innocent until proven guilty?
[11:51] <elkbuntu> !offtopic
[11:51] <ubotu> #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome!
[11:51] <alesan> elkbuntu, we are talking about the writer of one of the best FS linux has, not about Britney
[11:51] <elkbuntu> alesan, this is a *support* channel
[11:51] <TakeOut{u}> this is a place for ubuntu support only please alesan
[11:51] <defrysk> alesan, you are off topic
[11:52] <alesan> Changlinn, at least shut up that it was you to start the homicide discussion please
[11:52] <elkbuntu> alesan, this is your last warning
[11:53] <Frogzoo> trash talk -> #ubuntu-offtopic
[11:53] <bharat862004> wols: in order to make my net ok this is what i follow menu-->system-->administration-->network tools-->Netstat Tab -->then select Multicast information --> it detects something and then my net starts,,,,, but sometimes this does not work and then i again i restart and follow the above method and net works... is this the way net works on ubuntu ???
[11:54] <wols> bharat862004: no. are you in ubuntu right now?
[11:54] <alesan> elkbuntu, I just asked why we should have stopped. I understand now, but keep in mind I am not the one you should ban to have started an OT
[11:54] <bharat862004> wols: yes i am in ubuntu now
[11:54] <wols> bharat862004: sudo ps aux |grep ppp
[11:55] <|Osiris> does anyone know where (k)ubuntu stores info about where to install grub etc?
[11:55] <mIgUeL_sAn> hi guys
[11:55] <bharat862004> wols: output < bharat    5604  0.0  0.1   2860   776 pts/0    R+   15:41   0:00 grep ppp
[11:55] <bharat862004>  >
[11:55] <|Osiris> it takes the wrong disk after update
[11:55] <mIgUeL_sAn> what's the command to stop the ssh??
[11:55] <Frogzoo> |Osiris: that would be /boot/grub/
[11:55] <|Osiris> Frogzoo, yes
[11:55] <Frogzoo> |Osiris: that would be /boot/grub/menu.lst
[11:56] <wols> bharat862004: paste the output of ifconfig and dmesg |grep eth in a pastebin
[11:56] <|Osiris> Frogzoo, I know but where does the installer find the info
[11:56] <Frogzoo> |Osiris: menu.lst
[11:56] <wols> ostannar1: bios tells it what disk it is
[11:56] <|Osiris> Frogzoo, everytime when it upgrades grub it stores the wrong info in my menu.lst
[11:56] <wols> ostannar1: wrong infor in what way?
[11:56] <|Osiris> Frogzoo, also it installs grub on the wrong partition
[11:57] <Frogzoo> |Osiris: in menu.lst change the groot param
[11:57] <rambo3> |Osiris, you have wrong groot ?
[11:57] <mIgUeL_sAn> Frogzoo: what's the command to stop the ssh geeeeee its been a long time since i was using linux
[11:57] <Surkow> ok, I'm back. When I rebooted for a second time my internet stopped working again. Resetting (sudo /etc/init.d/networking restart) anything does not help
[11:57] <Frogzoo> mIgUeL_sAn: something like /etc/init.d/sshd stop
[11:58] <|Osiris> I want to install grub on hd0,6 but it tries on another disk
[11:58] <wols> ostannar1: what disk is hd0,6?
[11:58] <|Osiris> which cause a grub failure after every update
[11:58] <wols> in linux tems
[11:58] <|Osiris> hd0,6 is hda7
[11:58] <|Osiris> so everytime I have to boot from a gentoo cd and install grub manually
[11:59] <|Osiris> on the correct disk
[11:59] <Surkow> What I noticed that when my connection stops working and I have to switch to my second connection that gnome network manager can't find information about the driver anymore (gives an error) and renames the connection to a cabled connection.
[11:59] <wols> and how do you install grub there? what is in your /boot/grub/device.map ?
[11:59] <wols> Surkow: dmesg |grep eth
[11:59] <Surkow> when I try to reset the connection (sudo /etc/init.d/networking restart) it tries to resurrect the wrong connected that is not connected
[12:00] <Surkow> I will post it @pastebin wols
[12:00] <bharat862004> wols: here is the link : http://pastebin.com/931844
[12:00] <mIgUeL_sAn> Frogzoo: how about stoping the ssh in ubuntu 5.04?
[12:00] <Frogzoo> mIgUeL_sAn: something like 'sudo /etc/init.d/sshd stop'
[12:01] <mIgUeL_sAn> sudo: /etc/init.d/sshd: command not found
[12:01] <wols> bharat862004: what's in your /etc/network/interfaces ?
[12:01] <|Osiris> vols, just use the grub commands
[12:01] <mwe> |Osiris: is it set correctly in /boot/grub/menu.lst?
[12:01] <wols> ostannar1: what command?
[12:01] <bharat862004> wols: what ??
[12:01] <Surkow> @ wols - http://pastebin.com/931846
[12:02] <Surkow> I think I should paste it when it goes wrong..
[12:02] <|Osiris> wols, root (hd0,6) setup (hd0)
[12:02] <Surkow> instead of when it works now ;D
[12:02] <mwe> |Osiris: should be # groot=(hd0,6)
[12:02] <mIgUeL_sAn> Frogzoo: what a dumb question i was askin... i know why its not found
[12:02] <mIgUeL_sAn> Frogzoo: thanks
[12:02] <mwe> |Osiris: is there a comment like that in menu.lst. if not update-grub will fail
[12:02] <dcordes> !java
[12:02] <ubotu> To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository. Enable the backports repository on Edgy to install sun-java6-jre
[12:02] <wols> Surkow: what is the driver name for eth1?
[12:03] <mwe> |Osiris: should be in the automatic kernels list section
[12:03] <wols> bharat862004: I asked you what is in that file?
[12:03] <rambo3> wols, sudo lshw -c NET
[12:03] <SEOmoz> !pastebin
[12:03] <ubotu> pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic)
[12:04] <bharat862004> wols: link : http://pastebin.com/931847
[12:04] <|Osiris> devicemap say:  (hd0) /dev/sda
[12:04] <|Osiris> only one line
[12:04] <Surkow> @wols - I think forcedeth (marvel ethernet 1gbit)
[12:04] <Surkow> or wait
[12:04] <wols> ostannar1: that's a problem. should be hda not sda if it is hda
[12:04] <Frogzoo> |Osiris: try 'sudo grub-install /dev/hda6' or whatever
[12:04] <wols> Surkow: no. that's the nvidia
[12:05] <mwe> |Osiris: you should have the directive I mentioned or update-grub wont work
[12:05] <Surkow> I confuse myself XD
[12:05] <mIgUeL_sAn> what's the command to update all the necessary packages which is obsolete, i'm using ubuntu 5.04
[12:05] <|Osiris> mwe you meen the groot?
[12:05] <mwe> |Osiris: # groot=(hd0,6)
[12:05] <|Osiris> mwe, I uncommented it
[12:05] <mwe> |Osiris: in the "AUTOMATIC KERNELS LIST"
[12:05] <Frogzoo> |Osiris: but if you have other disks with boot records, you'll need to erase the mbr on them, cos they're being found first perhaps
[12:05] <wols> |Osiris: don't uncomment it
[12:05] <mwe> |Osiris: don't
[12:06] <Changlinn> ok so back on moving ubuntu from one ide drive to a sata drive, I have my grub menu and device.map here http://pastebin.com/931848
[12:06] <mwe> |Osiris: it should be a comment that's how update-grub works
[12:06] <Surkow> @wols  - sky2 must be the other then
[12:06] <Surkow> the marvell ethernet
[12:06] <|Osiris> mwe, what do I ned to do then, what do you mean with automativc kernel list?
[12:06] <mwe> |Osiris: it reads the comments in the automatic kernel list
[12:06] <bharat862004> wols: content of file in /etc/network/interface      < http://pastebin.com/931847 >
[12:06] <Changlinn> I have also switched fstab and done the install-grub /dev/sd6 commands
[12:06] <SEOmoz> !update
[12:06] <mwe> |Osiris: if you don't have a such a section the file is broken
[12:06] <ubotu> For upgrading, see the instructions at https://help.ubuntu.com/community/UpgradeNotes
[12:07] <|Osiris> mwe, so it is correct?
[12:07] <mwe> |Osiris: please pastebin the entire menu.lst file
[12:07] <|Osiris> mwe, stupid enough it is correct but it does not install grub correct
[12:07] <|Osiris> hang on
[12:08] <evilfourzero> ok my wine, is totally fucked up
[12:08] <bharat862004> evilfourzero: this is family channel... mind ur words
[12:08] <evilfourzero> After any space on any Windows GUI application, the text is not visible
[12:08] <evilfourzero> Ah kk sorry
[12:08] <Frogzoo> |Osiris: you need 'sudo install-grub' for that
[12:08] <evilfourzero> But is that problem documented?
[12:09] <acolitodehumilda> hola
[12:09] <bharat862004> wols: ??
[12:09] <wols> bharat862004: next time when it happens, try a sudo /etc/init.d/networking restart instead of the enu thing you described
[12:10] <bharat862004> wols: usually how does ubuntu connect to net... what method ??
[12:12] <osi2> mwe, lost internet connection
[12:12] <osi2> mwe, http://paste-it.net/o53abc4
[12:12] <bharat862004> wols: this is what i do,,, first start my system and after completely booting in ubuntu, i switch on the ADSL modem ???
[12:12] <evilfourzero> Where can I obtain help with WINE?
[12:12] <rambo3> #winehq
[12:12] <evilfourzero> thanks
[12:13] <osi2> mwe, got it?
[12:13] <mwe> osi2: so how does update-grub fail? It should touch the grub install itself, only update menu.lst
[12:13] <mwe> osi2: yeah
[12:13] <thyko> is it possible to upgrade my ubuntu install from 6.06 to 7.04?
[12:13] <osi2> mwe, I think you got me wrong
[12:13] <mwe> osi2: explain
[12:14] <osi2> mwe, grub auto  installs itself on the wrong partition
[12:14] <thyko> without formating my box
[12:14] <Changlinn> fogzoo: don't you mean grub-install?
[12:14] <egomezs> ola
[12:14] <bharat862004> wols: ???
[12:14] <mwe> osi2: auto installs? you mean when you install ubuntu?
[12:15] <Changlinn> thyko: it sure is, I did it a few weeks ago, but I went 6.06-6.10-7.04
[12:15] <berent> is there any youtube url grabber in ubuntu
[12:15] <osi2> mwe, yes
[12:15] <thyko> Changlinn: how do i do that?
[12:15] <Frogzoo> berent: it's a ff extension - videodownloader
[12:16] <Changlinn> so I do a grub-install /dev/sda6 from the live cd, then reboot, and no good
[12:16] <bharat862004> u can use addons for firefox
[12:16] <osi2> mwe, also when I update it autoupdates grub also
[12:16] <thyko> i'll jump stright to 7.04 and see what happens
[12:16] <Changlinn> thyko: at the prompt do sudo update-manager -d
[12:16] <Sepero> berent: url grabber?
[12:16] <Changlinn> thyko: or you can do that :P
[12:16] <mwe> osi2: but when you update it should not reinstall grub. only update the config file
[12:16] <osi2> mwe, not if there is a newer version of grub
[12:16] <berent> Sepero Frogzoo : if i want to download youtube/google videos
[12:17] <mwe> osi2: so sudo grub-install doesn't work?
[12:17] <osi2> mwe, and it looks like it also happends when I upgrade to a new kernel
[12:17] <mwe> osi2: that should only update the config file
[12:17] <Sepero> berent: Like Frogzoo said, you need a FF extension.
[12:17] <osi2> mwe, I don't want to try it again since it will crash grub again
[12:17] <kane77> how can I merge quite a number of .pdf's into one?
[12:17] <osi2> mwe, it works now by installing it though the Gentoo disk
[12:18] <thyko> Changlinn: doing tha ....
[12:18] <berent> Sepero Frogzoo : ff = firefox? where do i get that extension
[12:18] <mwe> osi2: updating the kernel should not reinstall grub only update the config file
[12:18] <Sepero> berent: Firefox -> Tools -> Add Ons -> Get Extensions
[12:18] <mwe> osi2: it doesn't just create wrong updates to the config file?
[12:18] <osi2> mwe, weird
[12:18] <osi2> mwe, this is not the only mahcine with this problem
[12:19] <osi2> mwe, no
[12:19] <mwe> osi2: it doesn't just create wrong updates to the config file?
[12:19] <mwe> hmm
[12:19] <osi2> mwe, weird huh?
[12:19] <osi2> mwe, it really installs grub in the wrong partition
[12:19] <wols> bharat862004: you switch on your adsl first. THEN turn on ubuntu
[12:19] <Sepero> berent: You'll probably want to search for the videodownloader extension like Frogzoo said.
[12:19] <berent> Sepero Frogzoo : thanks let me try
[12:19] <mwe> osi2: yeah. supposing # kopt=root= and # groot= are correct it's very odd
[12:20] <osi2> mwe, after the setup runned and rebooted for the first time I got a Grub Error 18
[12:20] <Sepero> ahoy
[12:20] <wols> mwe: I already said that his device map isn't correct. long ago
[12:20] <mwe> wols: I see
[12:20] <bharat862004> wols: that will work... but the reverse thing wont work ??? which i usually forgot to switch on my modem
[12:20] <berent> Sepero Frogzoo : download error
[12:21] <bharat862004> wols: so i have to restart my comp again :(
[12:21] <wols> bharat862004: not until you restart networking like I told you or like you do
[12:21] <bryan_> Hi, hope its cool to inquire: Im desperate haha, has anyone installed Ubuntu on a Macbook here?
[12:21] <wols> 12:04 < |Osiris> devicemap say:  (hd0) /dev/sda <- but he said he uses /dev/hda6 for grub
[12:21] <Xsylotte> back :D
[12:21] <osi2> mwe, do you know how I can autostart services on every boot? like ssh and hdparm
[12:21] <bryan_> Ive got mine installed with latest Ubuntu release, and need OSX back, but, wont boot from DVD or CD
[12:21] <bharat862004> wols: i usually forget to start the modem... most of the times... so wanted a solution... instead of restarting the whole operating system :)
[12:22] <mwe> osi2: yes
[12:22] <Xsylotte> leagris, thx :D
[12:22] <wols> bharat862004: I didn't say to restart the OS
[12:22] <flake> why did my drive letters change from hda..hdd back to sda..sdd ??  now I can't access one of my harddrives
[12:22] <osi2> wols, it is the disk not the partition ;)
[12:22] <osi2> mwe, how ;)
[12:22] <wols> flake: kernel update with libata
[12:22] <Sepero> berent: Can you paste the link
[12:22] <bharat862004> wols: ok thanks ;)
[12:22] <wols> osi2: but it will lokg on the wrong disk for the partition
[12:23] <berent> got it
[12:23] <wols> osi2: rcconf for example. or man update-rc.d
[12:23] <osi2> wobx, there is no partiion mentiond
[12:23] <flake> do i need to edit my fstab to be able to add it
[12:23] <mwe> osi2: update-rc.d or rcconf
[12:23] <berent> same way but it tells it is uploaded by unsigned
[12:23] <wols> osi2: for hdparm you need to write your own init script
[12:23] <wols> flake: add what?
[12:24] <flake> i think it's a partition of one of the drives that is missing
[12:24] <wols> flake: fdisk -l
[12:25] <bullgard4> lspci -vv prints: "0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRIV (ICH6 Family) SMBus Controller (rev 03)." Where is explained what domain=0000 means?
[12:25] <SleepingSloth> how do I stop my middle mouse button from pasting?
[12:25] <wols> bullgard4: PCI specs
[12:25] <osi2> mwe, ty
[12:26] <osi2> wols, you say I need to replace the hd(0)
[12:26] <osi2> ?
[12:26] <PaulD> Is Ubuntu compatable with debian or FC ?
[12:26] <bullgard4> wols: Which ones?The ones I wanted to consult are not publicly readable.
[12:26] <wols> osi2: no I did not
[12:26] <wols> bullgard4: I know
[12:26] <bullgard4> wols: So what to do next-best?
[12:26] <flake> wols - http://paste.ubuntu-nl.org/26242/
[12:26] <osi2> wols, thought so sorry
[12:27] <osi2> mwe, any other solutions? ;)
[12:27] <flake> would it be sdb3  ?
[12:27] <luisbg_> anybody uses irssi through screen?
[12:27] <bullgard4> PaulD: Ubuntu is compatible with Debian.
[12:28] <wols> bullgard4: google
[12:28] <wols> osi2: have you edited your device.map?
[12:28] <bullgard4> wols: Oh!
[12:28] <Sepero> berent: Did you get it??
[12:28] <Surkow> @ wols - I rebooted and still suffered from the problem...here are the results: http://pastebin.com/931853
[12:28] <wols> flake: I don't know which is missing
[12:28] <berent> Sepero : it doesnt download from google videos
[12:28] <bullgard4> luisbg_: I have been using irssi through screen but I do not do it often now any more.
[12:29] <bharat862004> wols: so what do u suggest ati or nvidia graphics ??? to buy ?
[12:29] <osi2> wols, no
[12:29] <shorto> hey all can comebody tell me why i have sound in totem but nowhere else?
[12:29] <kwajstabo> i downloaded libf2c library to Desktop, but now i dont know how to install it. Any idea?
[12:29] <shorto> anybody*
[12:29] <berent> Sepero : it says invalid url
[12:29] <luisbg_> bullgard4, how do I get back to the terminal to quit the screen without closing irssi?
[12:30] <luisbg_> bullgard4, when I want to disconnect from screen but not quit the irc client I mean
[12:30] <bryan_> nobody with any experience on an Intel Mac?
[12:30] <Sepero> berent: So you have the extension installed?
[12:30] <wols> bharat862004: everyne told you: nvidia. a 7600GT or such
[12:30] <osi2> wols, mwe g2g thanks for helping!
[12:30] <bullgard4> luisbg_: I do not think that this is possible. I believe that you have to close Irssi first.
[12:31] <wols> osi2: but your should
[12:31] <flake> what gui partition tool can i use to figure out which drive is mapped to which device
[12:31] <berent> Sepero : yes second time it go installed
[12:31] <wols> osi2: if you really have no sda but only hda
[12:31] <luisbg_> bullgard4, but my intention is to keep irssi always open
[12:31] <wols> flake: why do you need a gui?
[12:31] <bharat862004> wols: whats the equivalent nvidia graphics card for ati x1600 fx ?
[12:31] <Sepero> berent: Can you tell me what version you have installed?
[12:31] <wols> bharat862004: I just told you
[12:32] <osi2> wols, shat whould I change into what?
[12:32] <bharat862004> wols: ok thanks again
[12:32] <wols> the 7600gt should be about the same price as an ati 1600
[12:32] <bullgard4> luisbg_: As far as I am informed one solution to keep Irssi always on is to run it via Screen.
[12:32] <bharat862004> wols: hmm
[12:32] <wols> osi2: to hda
[12:32] <berent> Sepero : Version 1.1.1
[12:32] <Surkow> @ Sepero - I rebooted and got this as result (network down again) http://www.youporn.com/watch/6074
[12:32] <Sepero> berent: Ok, I have that version too. What's the google link?
[12:32] <flake> something that can tell me.. disk1 = /dev/sdb1  and disk-1 = /dev/sda1
[12:32] <flake> etc
[12:33] <wols> flake: those are not disks. that are partitions.
[12:33] <wols> mount will tell you for example when it's mounted only of course
[12:33] <flake> right but the system named those for me
[12:33] <osi2> wols, the weird thing is in I have a sda
[12:33] <osi2> wols, only in gentoo it called it hda
[12:33] <wols> flake: dmesg |grep sda will tell you
[12:34] <wols> osi2: so what is it called now in ubuntu?
[12:34] <berent> Sepero : any ideo
[12:34] <berent> Sepero : any vdeo
[12:34] <osi2> wobx, sda
[12:34] <berent> Sepero : any video
[12:34] <wols> and how it's called is kernel dependent as I told alread
[12:34] <osi2> wols, sda
[12:34] <wols> osi2: then it's eight. why did yous ay hda before to me then?
[12:34] <osi2> wols, it was in gentoo
[12:34] <osi2> the command i used
[12:35] <wols> we don't do gentoo support here...
[12:35] <wols> also we still ahven't a proper error description when and how it errors
[12:35] <kane77> how can I merge pdf's? I tried Ghostscript script I found but it ends in Unrecoverable error, exit code 1... what are other options??
[12:35] <luisbg_> bullgard4, yes, I open irssi through screen but then I don't see how to get irssi to the background
[12:35] <osi2> wols, I know but I worked with gentoo and it fixed the problem temporary
[12:36] <wols> osi2: will you now answer my question?
[12:36] <bullgard4> luisbg_: I have no experience on this endeavour.
[12:37] <Sepero> berent: I'm testing mine.
[12:37] <Surkow> I don't know if you guys are very busy with helping others....but would you think upgrading to a newer kernel with newer drivers would help?
[12:37] <luisbg_> bullgard4, ok thanks =)
[12:37] <Sepero> berent: I get the same error.
[12:37] <wols> Surkow: unlikely. your problem seems to be the other end since the network link fails to come up
[12:38] <Surkow> a problem with my router/modem/switch?
[12:38] <wols> Surkow: are you booting your router and the PC at the same time?
[12:38] <bryan_> anyone ever get "invalid mount option when attempting to mount the volume" error message?
[12:38] <PaulD> bullgard4, thank you.
[12:38] <osi2> wols, which question then?
[12:38] <bryan_> Im dyin here haha
[12:38] <wols> 12:35 < wols> also we still ahven't a proper error description when and how it errors
[12:38] <Surkow> @wols - the router is a part of the modem and a switch is connected to it.
[12:38] <Surkow> it' s always online
[12:38] <berent> Sepero : the funniest thing is even the link given in http://javimoya.com/blog/youtube_en.php gives error
[12:39] <Sepero> berent: It has worked with google for me before, they maybe upgrading or other problems.
[12:39] <Surkow> @wols - connection problem do not occur with my dual boot windows...so I assume it's something related to the drivers
[12:39] <osi2> wols, it occurs after installation when the system reboots for the first time it turns out grub is installed on the wrong disk. Also when updating the system when grub is involved it happened.
[12:39] <wols> I still see see no error from you
[12:39] <Smegzor> I've have moved my ubuntu install to a new box and X won't start.  It says No screens found.  I can boot into recovery mode, but I haven't found the command to reconfigure X.  What command do I need or do I just edit the config by hand?
[12:39] <Sepero> berent: There are other websites like videodownloader, you might want to try them out.
[12:40] <Sepero> berent: They basically take a given link and return to you a download link.
[12:40] <wols> Smegzor: dpkg-reconfigure xserver-xorg
[12:40] <rambo3> Smegzor, sudo dpkg-reconfigure xserver-xorg
[12:40] <berent> Sepero : how do they do it
[12:41] <Smegzor> That might be tricky.  I don't have networking on that box yet.
[12:41] <Sepero> berent: I don't really know.
[12:41] <osi2> wols, why don;t you see an error
[12:41] <Gerrit> Where can I find the post-login file to put xmodmap commands that I want to be carried out everytime I login via kdm?
[12:41] <osi2> wols, looks like an error to me, grub not working after installation
[12:41] <flake> wols - I figured it out, I refreshed my mounts and seen which drives weren't available, went into fstab and commented them out, then re-refreshed, now it's working
[12:43] <mjcruces> ola
[12:44] <darknox> is there a way to reset ubuntu without reinstalling it?
[12:44] <mjcruces> olaaaaaaaaaaaaaa
[12:44] <ermejo> join #aircrack
[12:44] <AnRkey> hi all
[12:44] <wols> osi2: cause an error is on your screen and you tell it to me. I don't see this. ergo: no error
[12:45] <AnRkey> how do i set my dhcp server to only handle requests from eth1?
[12:45] <mjcruces> dont speak inglish
[12:45] <wols> Gerrit: ~/.xesssion
[12:45] <Gerrit> wols: thanks
[12:45] <Gerrit> wols: Is it correct that the file does not exist yet?
[12:45] <wols> !es | mjcruces
[12:45] <ubotu> mjcruces: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[12:46] <wols> Gerrit: yes
[12:46] <mjcruces> wols
[12:46] <mjcruces> what?
[12:46] <osi2> wols, told before Error 18
[12:46] <ermejo> ci sono italiani qui
[12:46] <sybariten> i attached a USB cabinet with a hard disk ... i could hear it spinning. Now i cant mount /dev/sda1 . Any suggestions what i want to check?
[12:46] <wols> !it | ermejo
[12:46] <ubotu> ermejo: Vai su #ubuntu-it o su #kubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie!
[12:47] <ermejo> thank you
[12:47] <wols> osi2: you have and IDE and and SCSI or SATA disk in that PC?
[12:47] <mjcruces> olaaaaaaaaa
[12:47] <osi2> wobx, IDE
[12:47] <osi2> wols, IDE
[12:47] <wols> Smegzor: you want to check the error message you get
[12:47] <osi2> wols, but it is shows as SDA
[12:48] <mjcruces> no se
[12:48] <wols> osi2: single disk only?
[12:48] <osi2> wols, yes
[12:48] <mjcruces> no te entiendo
[12:48] <osi2> wols, g2g back in 30mins
[12:49] <wols> osi2: your problem is not that it looks on the wrong disk: http://wiki.linuxquestions.org/wiki/GRUB#Error_18
[12:49] <Smegzor> wols, I checked the error originally and was pretty clueless :)  Its doing a forced check (rebooting) and making me wait atm :(
[12:49] <ermejo> vorrei usare aircrack
[12:49] <ermejo>  questo
[12:49] <RainCT> Hi
[12:49] <wols> your ericx_2 wrong channel. english only
[12:49] <Keanu> Hey
[12:49] <Keanu> Can someone give me support please?
[12:50] <wols> !ask | Keanu
[12:50] <ubotu> Keanu: Don't ask to ask a question. Just ask your question :)
[12:50] <Keanu> Ah. Okay. Sorry.
[12:50] <bunt00> hi any idea if the nvidia driver supports geforce 6100 onboard
[12:50] <RainCT> Where are the network configurations saved (the different settings you can set on System -> Admin -> Network)?
[12:50] <wols> bunt00: it should
[12:50] <Keanu> Well - Iv installed Ubutnu Server.. All working fine.. But my only problem is the fact iv installed it without 1024xsomething views
[12:50] <wols> RainCT: /etc/network/interfaces
[12:51] <Keanu> And, I can't strain my eyes for long enough to look at 800x600
[12:51] <wols> Keanu: dpkg-reconfigure xserver-xorg
[12:51] <Keanu> Where would I type that in?
[12:51] <Driven10> terminal
[12:51] <Keanu> Okay, thanks
[12:51] <Keanu> I'll take a look for that
[12:51] <wols> !fixres | Keanu
[12:51] <ubotu> Keanu: The X Window System is the part of your system that's responsible for graphical output. To restart your X, type  sudo /etc/init.d/?dm restart  in a console - To fix screen resolution or other X problems: http://help.ubuntu.com/community/FixVideoResolutionHowto
[12:51] <Keanu> I'll stay incase I can't find it :P
[12:51] <RainCT> wols: thanks :)
[12:52] <Keanu> Thanks all :3
[12:53] <zeal> Hi, Im just about to buy some more ram, should i go for 1GB or 2GB, I got a 2.8ghz p4, and mostly do firefox and filesharing, and music listening
[12:54] <sybariten> personally i'd definitely go for 1 gb
[12:54] <Keanu> 1GB - In my opinion thats not really alot to get 2GB for.. But it depends on..
[12:54] <Keanu> If you want it super fast.. Or not
[12:54] <Keanu> (Sorry didn't include it into my last sentance)
[12:54] <bryan_> so nobody knows any mount errors i Ubuntu on a MAcbook?
[12:55] <RainCT> is it possible to switch between DHCP and static IP from the terminal (with a single command)?
[12:55] <SleepingSloth> how do I stop my middle mouse button from pasting?
[12:56] <Keanu> Hey - ubotu - I just tpyed in "sudo /ect/init.d/?dm restart" and it said "Command not found"
[12:56] <Keanu> Any ideas?
[12:56] <mezziah> good morning world
[12:56] <moQs_X-tra> hi
[12:56] <bryan_> cool, Linux isnt what I thought, any OS install that after setup prevents mounting Apple Install discs is a f-in POS as far as Im concerned! PEACE
[12:57] <SleepingSloth> how do I stop my middle mouse button from pasting?
[12:57] <wols> RainCT: sort of: put the static IP ininterfaces and when you want dhcp: sudo dhcp-client eth0
[12:57] <NET||abuse> Hi guys.. is anyone else able to get democracy working under feisty, using the latest versions?
[12:57] <zeal> thank, you, I will go for 1gb :)
[12:57] <RainCT> wols: and to get it back?
[12:58] <RainCT> to static
[12:58] <wols> Keanu: tehe ? depends on what displaymanager you use. kdm, gdm or xdm. and: ubotu is a bot
[12:58] <Xsylotte> question: how to intall fonts like arial, times new roman, calibri etc... ?
[12:58] <Xsylotte> *install
[12:58] <wols> RainCT: /etc/init.d/networking restart
[12:58] <RainCT> wols: cool, thanks. will try it out now
[12:59] <Keanu> Ah. Okay. He spoke like a person though... Man... Bots are advanced... Lol. I have no idea what display manager I am using? Is there a way to find out? Sorry i'm rather new to this.. Only got Ubuntu to work last night after figureing out it doesn't display anything when you type in your password.
[12:59] <predaeus_> !font | Xsylotte
[12:59] <ubotu> Xsylotte: Font installation basics here: https://help.ubuntu.com/community/FontInstallHowto - No fonts in Flash? Install "msttcorefonts" (from !Multiverse), "gsfonts", and "gsfonts-x11". No fonts in MPlayer? see !MPlayer
[01:00] <killruana> Bonjours
[01:00] <TakeOut{u}> !french | killruana
[01:00] <rambo3> lu
[01:00] <ubotu> killruana: Allez a #ubuntu-fr ou #kubuntu-fr pour de l'aide et de la discussion en francais.
[01:01] <RainCT> Keanu: you've written ect instead of etc
[01:02] <Dimensions> Hie ... how can i ssh into a machine with a port with 222 instead of 22 ?? there are two machines with same ip one is on port 22 other is with port 222 ...
[01:02] <wols> Dimensions: man ssh. -p or such
[01:02] <lenny64600> -fr
[01:04] <neil_feisty> Dimensions, u can ssh with -p option
[01:04] <jafair> help i don't know password root ubuntu feisty fawn
[01:05] <jafair> i want to install java runtime
[01:05] <RAOF> !root > jafair <--- Check the PM from ubotu
[01:05] <Dimensions> that doesn't work for me ...
[01:05] <mezziah> jafair: use sudo instead
[01:05] <Dimensions> it says illegal option -r
[01:06] <Dimensions> -p says bad port ...
[01:06] <Vorian> where can I find Klingon fonts for OO?
[01:06] <jafair> on terminal i type sudo but ask me a password
[01:06] <neil_feisty> Dimensions, -p 222
[01:06] <mezziah> yes, enter your password
[01:06] <mezziah> for your user account
[01:07] <Frogzoo> Vorian: apt-cache search klingon or google
[01:08] <Dimensions> neil_feisty:  ssh -p hostip:port ?
[01:08] <Dimensions> thanks guys
[01:08] <Dimensions> got it
[01:08] <Keanu> So, anyone got any idea?... How I like.. Fix the resolution...... Erm. .By adding a new one on?..
[01:08] <jafair> yes i already my password an come a message "authentication failure"
[01:09] <mezziah> jafair: this is odd.. did you download the correct java package and hit 'sudo sh jr....bin'?
[01:09] <mezziah> because this one should work, at least it did for me
[01:10] <neil_feisty> ssh -p port, Dimensions
[01:11] <frandavid100> hey guys
[01:11] <neil_feisty> Dimensions, , or u can man ssh in terminal
[01:11] <frandavid100> do you know what the command to call the ubuntu shutdown menu is?
[01:11] <jafair> thanx alot guy i'll try what you are suggested, coz i am a new one with ubuntu
[01:11] <frandavid100> I'd like to file a bug against it but I don't know its actual name
[01:12] <defrysk> frandavid100, sudo poweroff
[01:12] <mezziah> frandavid100: hit 'sudo halt -p'
[01:12] <defrysk> frandavid100, sudo shutdown -h now
[01:12] <mezziah> oh poweroff also works? good to know
[01:12] <frandavid100> not that, the dialog that pops up when you push the power button
[01:12] <frandavid100> the one with log off, restart, shutdown... on it
[01:14] <Keanu> Okay, iv got a problem. Iv went to /etc/X11/xorg.conf like the guide told me too.. Iv found the display.. But under modes it says "1024x768" yet in "System, preferences, Screen Resolution" it doesn't show "1024x768" it only shows "800x600" and "640x480" Any idea anyone?
[01:14] <neil_feisty> frandavid100, i think its the log out button
[01:15] <frandavid100> I think the package is gnome-power-manager
[01:15] <mezziah> Keanu: no idea for this one but you can remove all unneeded resolutions in the xorg.conf so that theres only the one left you want to use
[01:16] <Keanu> Ohh okay
[01:17] <osi2> wols, I'm back
[01:17] <osi2> wols, I looked up the error indeed and tried to analyse but reinstalling grub solved it
[01:18] <Keanu> Erm, i know its a stupid question and all.. But @Mezziah how do I save after iv edited it?
[01:18] <mezziah> Keanu: depends on the editor youre using
[01:18] <mezziah> in nano its ctrl+o
[01:18] <Keanu> Erm... Terminal?
[01:19] <Xsylotte> question: i have installed r-project. but i can't find it in applictaions menu
[01:19] <mezziah> yes, sure, but what did you enter in order to edit the xorg.conf?
[01:19] <mezziah> nano, vi...?
[01:19] <Xsylotte> question 2: my amarok crashed whenever i try to play mp3 file.
[01:20] <uakkeri> Hi folks!
[01:21] <uakkeri> my IBM is overheating... plz help
[01:21] <liquiddoom> Is it safe to turn it off for now?
[01:21] <Xsylotte> anyone ?
[01:21] <Keanu> Sorry - I had to grab the fly spray. I'll see4 now
[01:21] <mezziah> heh, could also need it here
[01:22] <mezziah> cat's doing nothing :<
[01:22] <Keanu> I took out some information (The old displays"
[01:22] <Keanu> )**
[01:22] <mezziah> yes, okay
[01:22] <Keanu> So how would I go around saving it?
[01:22] <mezziah> but i want to know which editor you're using
[01:22] <Keanu> And Lol @ the flyspray comment. :)
[01:22] <Keanu> Erm, Terminal I thinl?
[01:22] <Keanu> Think*
[01:23] <mezziah> ok whats the command you entered to edit the file?
[01:23] <Keanu> It says GNU Nano
[01:23] <mezziah> good, then hit ctrl+x to save it and ctrl+o to leave the editor
[01:23] <Keanu> sudo nano /etc/X11/xorg.conf Thats the command
[01:23] <mezziah> but be sure that you have sudo rights
[01:23] <Keanu> Okay
[01:24] <Keanu> okay.. I think I saved it..
[01:24] <Xsylotte> question 2: my amarok crashed whenever i try to play mp3 file.?
[01:24] <Keanu> Yay I did
[01:24] <Keanu> Okay, so should I reset now?
[01:24] <mezziah> fine, then you have to restart the x-server
[01:24] <mezziah> should work now
[01:25] <Keanu> X-server? Should I just reset the whole pc?
[01:25] <mezziah> no, only the x-server, save and close all your apps and hit ctrl+alt+backspace in order to do that
[01:25] <Keanu> ...Uhoh..
[01:25] <Keanu> Would it make any difference if I actually reset the whole pc?...
[01:26] <mezziah> no it's actually the same thing, but it takes much more time :>
[01:26] <Keanu> Ahh.. Phew
[01:26] <Keanu> I really hope this works
[01:26] <mezziah> yes, let me know if it worked
[01:26] <Keanu> My eyes can't stand much more of that resolution. :P
[01:26] <mezziah> heh
[01:27] <blazemonger> the only bad thing about ubuntu is it hates my ati rage 128 video card
[01:27] <Keanu> Wtf..
[01:27] <blazemonger> debian works flawless but ubuntu hates it
[01:28] <Keanu> I just got an error.
[01:28] <mezziah> what error did you get?
[01:28] <Keanu> :( My god.. Don't say I have to re-install ubuntu
[01:28] <Keanu> I couldn't see in time.
[01:28] <mezziah> let me guess, the x-server didnt fire up?
[01:28] <Keanu> I'll type itout this time.
[01:28] <Keanu> Something like that.
[01:28] <blazemonger> keanu: give debian a try
[01:28] <Keanu> ...? Debian?..
[01:28] <blazemonger> ubuntu gave me nothing but crashes andd wierd screen errors
[01:28] <blazemonger> on my desktop
[01:28] <blazemonger> my desktop system has  a rage 128 card
[01:29] <blazemonger> my notebook though, ubuntu works flawless
[01:29] <mezziah> debian and ubuntu aren't that different
[01:29] <Keanu> I can't if it means more downloading.. Cause I dun havehigh speed net at the moment...
[01:29] <uakkeri> my laptop ibm t30 is melting... help
[01:29] <mezziah> Keanu: are you sure you didn't forget to keep the " outside of the resolution?
[01:29] <blazemonger> i don't see why ubuntu would crash my desktop
[01:29] <Thomas[NL] > how to generate of list of files in a directory and his sub-directories??
[01:29] <Keanu> Okay... Here... it is...
[01:29] <Keanu> I didn't, I don't think I did.
[01:29] <Keanu> Okay!
[01:29] <Xsylotte> question: i have installed r-project. but i can't find it in applictaions menu??
[01:30] <Keanu> superblock last mount...
[01:30] <blazemonger> it's a d865perl motherboard, and has a rage 128 pro 32mb video card which is pretty good
[01:30] <mezziah> yes, it's quite important
[01:30] <Keanu> contiguous...
[01:30] <blazemonger> and SHOULD have NO problem running ubuntu
[01:30] <mezziah> huh, what you're doing?
[01:30] <blazemonger> like progs like cheesetracker it bombs out on me
[01:30] <Pici> Thomas[NL] : ls -R
[01:30] <blazemonger> and hydrogen
[01:30] <blazemonger> and jack daemon
[01:30] <Keanu> I'm just typing how the ones that stand out..
[01:30] <blazemonger> but on my desktop debian works flawless
[01:30] <mezziah> oh, right
[01:30] <Keanu> I think its installing something?
[01:30] <blazemonger> but on my notebook ubuntu works flawless i dont see what it could be
[01:30] <Thomas[NL] > Pici, thank you
[01:31] <mezziah> installing? then it has really nothing to do with the last change regarding the resolution :S
[01:31] <Keanu> Reading files needed to boot (seccond stage)
[01:31] <blazemonger> but gnewsense works perfect on my desktop and that's basd ON ubuntu
[01:31] <blazemonger> wierd isn't it?
[01:31] <Keanu> oI think its loaded x-server
[01:31] <kalabra> what?
[01:31] <blazemonger> ghow ubuntu will crash my desktop syste
[01:32] <blazemonger> m by not doing anything but running a screensaver
[01:32] <kalabra> ahoooo
[01:32] <arcade> We're a bunch of guys at work who has a problem with feisty.  After installing feisty, it starts rewnewing it's IP address from the DHCP server way too often (at least once a day).  This wasn't the behaviour of any previous release, nor a problem with neither windows nor other linux distros ..
[01:32] <mezziah> blazemonger: well.. look, i only had problems with debian although i actually loved the distro.. but i had had only problems with it, reinstalled it like every two months.. now i use ubuntu for several months and it works just fine
[01:32] <blazemonger> the molecule screensaver is bugggggy as hell
[01:32] <arcade> any ideas?
[01:32] <Keanu> Okay, that hasn't changed anything :(
[01:32] <mezziah> hmm
[01:32] <blazemonger> i love ubuntu bu8t I just can't even record my dj mixes in it with audour
[01:32] <mezziah> could you paste the lines with the resolution at http://pastebin.ca ?
[01:32] <SleepingSloth> how do I stop my middle mouse button from pasting?
[01:33] <Keanu> Okay.
[01:33] <blazemonger> when i loaed up audour or audacity in jubuntu i get crash after crash and when the screensaver the molecule saver comes on it gtotally bugs out and im like..a screensaver of ALL things making a super fast 2.4 ghz system crash
[01:33] <blazemonger> with 765 mbof memory and a 32mb rage 128 card with opengl
[01:33] <mezziah> o_O
[01:34] <Keanu> Oh my poor eyes.
[01:34] <blazemonger> its not mark shuttleworth's fault..it's more like.whjoever mautains that molecule screensaver is on the drugs lol
[01:35] <Keanu> Okay.. It should be
[01:35] <Keanu> http://pastebin.com/931874
[01:36] <mezziah> ok wait a sec
[01:36] <Keanu> Okay.
[01:36] <mezziah> just curious.. did you ever see a graphical screen?
[01:36] <Keanu> Erm? Graphical?
[01:37] <mezziah> yes like window manager
[01:37] <mezziah> kde, gnome
[01:37] <Keanu> Gnome, yeah I think.
[01:37] <Keanu> With a mouse and stuff.
[01:37] <mezziah> ok, just wondering because there's the default stuff
[01:37] <mezziah> and, does it start with the changed settings?
[01:37] <Keanu> Is that bad?
[01:37] <mezziah> if it worked it can't be bad i think
[01:38] <Keanu> It doesn't start with my new resolution, no.
[01:38] <Keanu> Still at 800x600... (Headache resolution)
[01:38] <mezziah> hrm, what resolution were you using before?
[01:38] <Keanu> 800x600
[01:39] <Keanu> Then I edited out 800x600
[01:39] <Keanu> Out of that xorg.conf
[01:39] <mezziah> so, add it again and see if you can change the resolution in gnome using ctrl++/ctrl+-
[01:39] <Keanu> Okay..
[01:39] <Keanu> 2 secconds.
[01:39] <predaeus_> SleepingSloth, why would you want that? It is the most practical feature in Linux Desktops
[01:39] <mezziah> yep
[01:40] <mezziah> in the meantime i could get a new and fresh coffee..
[01:40] <dchky> mmmm, starbucks hot chocolate.
[01:40] <predaeus_> !enter | Keanu
[01:40] <ubotu> Keanu: Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation!
[01:40] <mezziah> great, my bro stole it :<
[01:40] <Keanu> Okay, sorry o.
[01:40] <Cocoon> er... i'm not an expert with xorg, but shouldn't line 19 of that pastebin keanu sent read "Depth 16" and not "Depth 15". I've never seen a 15-bit colour depth before....
[01:40] <Keanu> o.o*
[01:42] <mezziah> Cocoon: oh yes, youre right..
[01:42] <mezziah> um, wait, no. i have the same content in my xorg.conf, but additionally 16bit
[01:42] <uakkeri> i'd like to set the fan manually to prevent my laptop from burning... plz help
[01:43] <Keanu> Sorry about that, had another fly attack me.
[01:44] <Keanu> Just to ask - Where would I type in "ctrl++" because I tried pressing it on the desktop, and it didn't do anything
[01:44] <mezziah> Keanu: maybe you also could try adding 16bit resolution, it seems to be missing
[01:44] <Keanu> Okay
[01:45] <jetscreamer> hold the ctrl key while pressing the + on the keypad
[01:45] <jetscreamer> maybe have numlock on not sure
[01:45] <Keanu> Ah
[01:45] <Keanu> It does have 16
[01:45] <Keanu> I just didn't paste it
[01:45] <Keanu> Sorry.
[01:46] <mezziah> okay.. so you have the resolutions 1024x786 and 800x600, right? do both show up in the gnome settings dialog?
[01:46] <Keanu> (Sorry for multi lines aswell) When I press CTRL + it only affects the internet browsers..
[01:46] <Keanu> Where is the Gnome Settings dialog? >.>
[01:47] <mezziah> er, dunno, i'm on e17.. but i mean the dialog where you can change the resolution by pressing buttons and stuff
[01:47] <jetscreamer> under the settings... 3rd from left on taskbar
[01:47] <Keanu> Well, I just downloaded "Server" off the ubuntu site... So I dunno...
[01:47] <Keanu> Okay, 2 secconds.
[01:48] <jetscreamer> admin or preferences something like that
[01:48] <Keanu> Preferences.
[01:48] <Cocoon> Keanu: from the menu - System > Preferences > Resolution
[01:48] <Keanu> Okay
[01:49] <Keanu> I see.. "800x600" and "640x480"
[01:49] <mezziah> this is odd.. can't you add a res anywhere?
[01:49] <jetscreamer> i had that
[01:49] <Keanu> I don't know.. :(.. Its doing my eyes in though..
[01:49] <jetscreamer> my stuff wasn't getting autodetected well
[01:50] <jetscreamer> iirc it was the nv driver but i forget
[01:50] <jetscreamer> i just used my real xorg.conf
[01:50] <berent> why are google videos so bad they always play broken
[01:50] <jetscreamer> and it worked fine
 latest version of Flash?
[01:50] <berent> Viper550 ; from where
[01:50] <GeekMaster1> th1 hi
[01:50] <Viper550> Adobe website? Do you have 9 for Linux yet?
[01:50] <uakkeri> Anyone with IBM thinkpad plz help
[01:51] <berent> Viper550 ; what is 9
[01:51] <Keanu> Erm...?... iirc?... nv?.. My head..
[01:51] <Viper550> the latest version of Flash Player?
[01:51] <SleepingSloth> predaeus - I want to know how to do it - can you answer?
[01:52] <mezziah> Keanu: iirc=if i remember correctly.. and nv means the nvidia display driver, if you have a nvidia graphics card you should use this driver in the "Device" section
[01:52] <pwngasm> if i was to get a webcam, which brand would be the most linux compatible?
[01:52] <uakkeri> has anyone had laptop overheating problems?
[01:52] <berent> Viper550 ; from where?
[01:52] <SleepingSloth> predaeus - if you must know, I have a very twitchy scroll wheel, which results in a lot of unwanted pastes - but essentially it is up to me what I use my PC for....
[01:52] <Keanu> I don't think I have a nvidia graphics card..
 WWW.ADOBE.COM
[01:53] <mezziah> hmm what then? ati?
[01:53] <Keanu> I'm going to go take a lie down
[01:53] <dchky> I have, I had an ant infestation and they munged up the wires. It gets a tad hot.
[01:53] <Keanu> Thanks for all your support
[01:53] <SleepingSloth> can anyone tell me how to disable m middle-button-paste please?
[01:53] <mezziah> okay see you around
[01:53] <niki_kolev> uakkeri : i have dell inspiron1100
[01:53] <Keanu> I will prob be back later on, but right now.. I feel ill cause of the screen resolution.
[01:53] <Keanu> Thanks all.
[01:53] <dchky> Middle button paste, that's only like one of the best features dating back to... Well, forever.
[01:54] <Keanu> And once agian, thanks for the support Mezziah. Greatly apreicated.
[01:54] <dchky> in your xorg.conf file - it can be switched off their.
[01:54] <mezziah> youre welcome
[01:54] <[n1ce] MiLk> hey guys
[01:54] <BlendArt> hey
[01:54] <[n1ce] MiLk> does anyone use gdesklets and beryl?
[01:55] <jetscreamer> middle button pastes what you have highlighted
[01:55] <[n1ce] MiLk> i cant bring them both to work properly
[01:55] <Cocoon> [n1ce] MiLk: only with a gun to my head
[01:55] <[n1ce] MiLk> ^^
[01:55] <BlendArt> wow harsh
[01:55] <Cocoon> i found gdesklets way too buggy, and beryl is just as bad.
[01:55] <dchky> I guess if you don't highlight anything, then that twitchy middle mouse button wont be a problem.
[01:55] <[n1ce] MiLk> hmm why dont u like beryl
[01:56] <[n1ce] MiLk> i like the cube
[01:56] <BlendArt> cube = lag
[01:56] <[n1ce] MiLk> hmm works fine here
[01:56] <dchky> I didn't find beryl buggy, a tad slow, but not buggy.
[01:56] <Cocoon> cube eats my CPU
[01:56] <GeekMaster1> Probably doesnt have a card to support it
[01:56] <chronicle> Having trouble with mkisofs under dapper
[01:56] <dchky> Plenty of cards support it, few support it well.
[01:56] <chronicle> mkisofs version  2.01+01a01-4ubuntu6
[01:56] <[n1ce] MiLk> y i got enough power to run it so why not use it
[01:57] <BlendArt> when are de nvidiaglx updated?
[01:57] <GeekMaster1> My comp runs pretyt fast even with Beryl. people that ahave the hardware to support it LOVE Beryl as I do
[01:57] <Cocoon> i work with 3D engineering tools all day, i even found the cube quite natural to use, but it just wasn't worth the CPU cycles
[01:57] <chronicle> mkisofs puts the files under some randomly named directories under the specified root (using -root)
[01:57] <dbzdeath[lappy] > BlendArt: try nvidia-glx-new
[01:57] <chronicle> Anybody have any idea why?
[01:57] <[n1ce] MiLk> geekmaster same here
[01:57] <BlendArt> thawnks
[01:57] <chronicle> There doesn't seem to be any update to fix it either.
[01:57] <[n1ce] MiLk> i got just one prob with it
[01:58] <[n1ce] MiLk> when i want to play warcraft i have to switch to metacity window managewr
[01:58] <[n1ce] MiLk> cause mousescrolling doesnt work with berly
[01:58] <chronicle> Anybody?
[01:58] <[n1ce] MiLk> and i dont know why
[01:58] <GeekMaster1> mousescrolling doesnt work with berly?
[01:58] <BlendArt> rofl
[01:58] <[n1ce] MiLk> in warcraftt frozen throne
[01:58] <GeekMaster> What do you mean mousescrolling doesnt work with berly?
[01:58] <dbzdeath[lappy] > GeekMaster: usually it does
[01:58] <dchky> gl desktop screws up the virtual desktops, beryl needs to extend its cube vertical as well. That'd be cool.
[01:59] <BlendArt> lol
[01:59] <Vw1`8t> hello everyone, i'm having problem with selecting Win XP as my deafult OS to boot with. My distro is UBUNTU...and I'm curently at menu.lst...but cant figure out how to change boot order
[01:59] <[n1ce] MiLk> do you know this game?
[01:59] <Vw1`8t> anyone can help?
[01:59] <[n1ce] MiLk> u can look arround with mouse
[01:59] <GeekMaster> It always
[01:59] <GeekMaster1> does for me
[01:59] <Vw1`8t> and yes, i'm loged in as root
[01:59] <dbzdeath[lappy] > Vw1`8t: look for default
[01:59] <zeroday> Vw1`8t: you need to add "savedefault" to ur prefereed one
[01:59] <dchky> in your menu.lst look for Default and adjust to the partition you want to boot.
[01:59] <Vw1`8t> just ad "1"?
[01:59] <[n1ce] MiLk> well i can move the screen up and down
[01:59] <chronicle> Vw1`8t: Change default's value
[01:59] <[n1ce] MiLk> but left and right doesnt work properly
[02:00] <zeroday> Vw1`8t: and delete savedefault from the ubuntu
[02:00] <GeekMaster1> As I said.... People with the hardware support LOVE Beryl. You don't have the hardware? You call it buggy
[02:00] <GeekMaster> I've NEVER had a problem with Beryl
[02:00] <zeroday> Vw1`8t: no the word savedefault at the kernel list
[02:00] <GeekMaster> Not one
[02:00] <dbzdeath[lappy] > GeekMaster1: hardware support?
[02:00] <[n1ce] MiLk> i love it when i dont play with it
[02:00] <rambo3> !ot
[02:00] <ubotu> #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome!
[02:00] <GeekMaster1> Hardware to support it
[02:00] <Vw1`8t> allright
[02:00] <Vw1`8t> let me try
[02:00] <[n1ce] MiLk> all is fine when i dont use wine
[02:00] <[n1ce] MiLk> but i think beryl conflicts with the window manager of wine
[02:01] <chronicle> Does anybody here use Dapper? (6.06 LTS)
[02:01] <GeekMaster> I'm not sure about that. I run a VM to run apps for other OS'
[02:01] <dbzdeath[lappy] > ouch dapper?
[02:01] <[n1ce] MiLk> <--- feisty
[02:01] <liquiddoom> !smp
[02:01] <ubotu> Background to the decision to replace -686, k7 and -smp kernels with -generic can be found here https://lists.ubuntu.com/archives/ubuntu-devel/2006-August/019983.html (the -386 kernel is still available if needed)
[02:01] <dbzdeath[lappy] > chronicle: why are you still using dapper?
[02:02] <Cocoon> Dapper? (Examines the dust on his 6.06 CD)
[02:02] <[n1ce] MiLk> ^^
[02:02] <chronicle> dbzdeath[lappy] : The machine's kind of sensitive (runs as sort of a surver)
[02:02] <chronicle> server
[02:02] <dbzdeath[lappy] > chronicle: ah... well.. do you have a dapper specific problem?
[02:02] <Vw1`8t> zeroday, i've deleted "savedeafult"...2 of them total
[02:02] <chronicle> Yeah, mkisofs seems to be behaving strangely
[02:03] <Vw1`8t> sounds right?
[02:03] <chronicle> mkisofs version  2.01+01a01-4ubuntu6
[02:03] <liquiddoom> Does anyone know of a way to run normal applications across multiple machines (like distcc for normal applications)?
[02:03] <chronicle> mkisofs puts the files under some randomly named directories under the specified root (using -root)
[02:03] <dchky> what is a 'normal' application?
[02:03] <liquiddoom> dchky: Things like GIMP
[02:03] <dbzdeath[lappy] > dchky: i think he means use the combined power of other machines to handle the program
[02:03] <Ind[y] > Hello. How can I change the default keyring of an applet?
[02:03] <dchky> ahh. You could nfs your home directory
[02:04] <dchky> or share it some other way.
[02:04] <dchky> ahhh, wrong again.
[02:04] <SleepingSloth> can anyone tell me how to disable m middle-button-paste please?
[02:04] <dbzdeath[lappy] > i've always wondered... what's a keyring?
[02:04] <liquiddoom> It's like kwallet
[02:04] <Ind[y] > (I want to make it same as the network key, for stopping the Keryring Manager of asking me a password each time I try to connect)
[02:04] <liquiddoom> Saves your passwords
[02:04] <dchky> What kind of mouse do you have SleepingSloth.
[02:04] <dbzdeath[lappy] > liquiddoom: ahh
[02:05] <erUSUL> SleepingSloth: i do not think you can is a "core" (and very usefull imnsho) X feature
[02:05] <SleepingSloth> dchky: 2 button with scroll wheel	
[02:05] <dchky> Disabling the middle mouse button is something that you'll need to do in the xorg.conf file.
[02:05] <dbzdeath[lappy] > liquiddoom: why would you want that? it sounds like a big security issue to me
[02:05] <chronicle> dbzdeath[lappy] : ???
[02:05] <liquiddoom> Simplicity.
[02:05] <dbzdeath[lappy] > chronicle: yes?
[02:05] <SleepingSloth> erUSUL - I dont care who thinks it is useful functionality, I just want to turn it off
[02:05] <liquiddoom> It has a master password though
[02:05] <dchky> Just a sec, I'll take a look for you and see if I can figure out which line does it.
[02:05] <mosffit> how can i install ubuntu when im inside winxp, is there a way without booting it to cd but instead type something or double click something inside the ubuntu cd installer?
[02:05] <dbzdeath[lappy] > liquiddoom: well that's a bit better
[02:05] <Ind[y] > I don't want to be asked for a password each time I login, and my system tries to connect to the network.
[02:05] <erUSUL> SleepingSloth: i answered that too
 It can be done the other way around
[02:06] <SleepingSloth> erUSUL - well, not really
[02:06] <[n1ce] MiLk> mosffit do you want to run it with a virtual machine?
[02:06] <liquiddoom> !qemu | mosffit
[02:06] <ubotu> mosffit: qemu is an emulator you can use to run another operating system - see https://help.ubuntu.com/community/WindowsXPUnderQemuHowTo
[02:06] <chronicle> dbzdeath[lappy] : So this is not the place to ask questions about Dapper or old versions then. Any idea where I might find a solution to my problem?
[02:06] <erUSUL> SleepingSloth: you *can* *not* in case you do not anderstand it the first time
[02:06] <mosffit> what do you mean liquiddoom ?
[02:06] <dchky> If I remember rightly, switching off your middle mouse button will mean you need to mess with: Option         "ZAxisMapping" "4 5"
[02:06] <dbzdeath[lappy] > mosffit: you could risk setting something like vmware to use the physical disk and then install ubuntu
[02:06] <dchky> Sorry, mess with ZAxisMapping
[02:06] <mosffit> no
[02:06] <dbzdeath[lappy] > liquiddoom: can qemu use physical disks?
[02:06] <Ind[y] > Couldn't it just be simple? No keyrings, no Keyring Manager, no pam, nothing. I just want to connect. All other stuff is bullshit.
[02:06] <liquiddoom> mosffit: As in?
[02:07] <[n1ce] MiLk> mosffit you want to install it next to your windows xp right?
[02:07] <SleepingSloth> erUSUL - I *did not* "understand" because you said "I do not think..." which isnt very definitive, is it? Thanks for your answer and your opinions.
[02:07] <liquiddoom> erm, wrong person
[02:07] <mosffit> im on winxp now and i plugged my ubuntu cd installer, i can see in my drive d: which is the ubuntu cd installer, which file should i click to install ubuntu?
[02:07] <[n1ce] MiLk> u need to boot the disk
[02:08] <erUSUL> SleepingSloth: no problem
 Make sure your BIOS is set to boot from CD
[02:08] <[n1ce] MiLk> if you got the life cd
[02:08] <dbzdeath[lappy] > chronicle: sorry i'm a little blind i only just saw your reply... um well most people here are far ahead of you and the problem is probably not relevant to dapper in any way and is more likely a problem to do with the specific mkisofs version i would suggest installing the latest version
 Then reboot
[02:08] <mosffit> yes i know how to boot it from cd but when i load it using the cd installer it takes so long to load the live ubuntu desktop appearance
[02:08] <chronicle> dbzdeath[lappy] : Exactly, only I couldn't find any updates (official) to the version.
[02:09] <dbzdeath[lappy] > chronicle: hm....
 It will be LOADS faster once it's installed
[02:09] <dbzdeath[lappy] > chronicle: it could be a bug with the current version.. otherwise maybe you should uninstall the ubuntu package grab the source and install that
[02:09] <[n1ce] MiLk> mosffit well theres no other way to install ubuntu
[02:09] <dbzdeath[lappy] > liquiddoom: you could do it the way i suggested
[02:10] <Giggs> hey anybody wants a domain for 1$ a month ?
[02:10] <dbzdeath[lappy] > certainly not official
[02:10] <dbzdeath[lappy] > but should work
[02:10] <[n1ce] MiLk> mosffit you cant install it when ur in windows
[02:10] <dchky> Do you have more than 256 megabytes of ram mosffit ?
[02:10] <dchky> You might need to download the alternate installer.
[02:10] <mosffit> i only have 256ram
[02:10] <chronicle> dbzdeath[lappy] : Hmm... Would have done that with a desktop; was just wondering if anybody had encountered this problem. Anyway, thanks for your time.
[02:11] <jvolkman> is there a way to figure out what applications are using the most io?
[02:11] <mosffit> last time when i used this ubuntu cd installer to load the desktop i didnt have any problem but now ,im puzzled it took so long to load the desktop
[02:11] <mezziah> jvolkman: you mean like mem and cpu usage?
[02:11] <jvolkman> disk usage
[02:11] <ujku83> hi there
[02:12] <TakeOut{u}> jvolkman, df or du
[02:13] <jvolkman> TakeOut{u}, not space usage, throughput
[02:13] <jvolkman> my harddrive is going crazy and I want to figure out why
[02:13] <TakeOut{u}> oh, na, sorry dude
[02:14] <guille1983> how to update to 7.04 from CD ?
[02:14] <mosffit> and sometimes when booting the live cd, i got this error "There is an error starting gnome settings daemon. some things such themes, sounds, or background settings may not work correctly. The last error message was: Did not receive a reply. Possible causes included: he remote aplication did nt send rely.The message bus security policy blocked tthe reply. the reply timeout expired. or the...
[02:14] <mosffit> ...network connection was broken. Gnome will still try to restart the Settings Daemon next time you log in."
[02:14] <tippe_66> #/cw
[02:15] <tippe_66> #cw
[02:15] <tippe_66> sorry..
[02:15] <Giggs> 1$ in a month domain go to : http://allhostingsolutions.com/g.o/Giggs
[02:15] <Giggs> 1$ in a month domain go to : http://allhostingsolutions.com/g.o/Giggs
[02:15] <tippe_66> cw=YcP?;$
[02:16] <mosffit> while booting live cd i also see this error message 114.4600 intel_rng: FWH not detected
[02:16] <Giggs> 1$ in a month domain go to : http://allhostingsolutions.com/g.o/Giggs
[02:17] <mosffit> the first 4 times i boot this live cd i have no problem, but now im puzzled why i took so long
[02:17] <TakeOut{u}> spammer ?
[02:17] <dman> when i install ssmtp i get this error
[02:17] <dman> Setting up ssmtp (2.61-11) ...
[02:17] <dman> hostname: Unknown host
[02:17] <dman> dpkg: error processing ssmtp (--configure):
[02:17] <zeroday> mosffit: i get the same issue, ignore it and it shouldnt affect yuo that badly
[02:18] <zeroday> dman: you have to configure ssmtp
[02:18] <dman> oh?
[02:18] <mosffit> no other suggestions?
[02:19] <mosffit> then i guess i have to reboot again and try to wait from this cd to reach the desktop of ubuntu and hopefully ill click install icon to install ubuntu
[02:19] <dman> zeroday: it happens when im trying to *install* ssmtp
[02:20] <zeroday> dman: does install continue?
[02:20] <zeroday> dman: i mean is it actually installed?
[02:20] <gordonjcp> ha
[02:20] <dman> yeah
[02:20] <dman> it looks like it
[02:20] <dman> but how do i make aptitute stop erroring now?
[02:20] <dman> it wont untill i remove it
[02:21] <zeroday> dman: configure ssmtp
[02:21] <dman> configure how?
[02:21] <zeroday> dman: after install in console ssmtp --configure
[02:21] <zeroday> dman: look in man ssmtp for more info
[02:22] <dman> theres no --configure flag
[02:22] <dman> ssmtp seems to be just sendmail
[02:23] <dman> so its installed and working, but like aptitute doesnt know that
[02:23] <zeroday> dman: possible
[02:23] <dman> so how do i tell apt that i dont need it configured anymore
[02:23] <zeroday> dman: not sure sorry
[02:24] <julian> num ber une  the word
[02:25] <Giggs> 1$ in a month domain go to : http://allhostingsolutions.com/g.o/Giggs
[02:25] <sn0> !ops Giggs
[02:25] <ubotu> Sorry, I don't know anything about ops giggs - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[02:25] <sn0> :I
[02:25] <julian> hola alguien por ahi
[02:25] <zeroday> ops | Giggs
[02:26] <jussi01> !es | julian
[02:26] <ubotu> julian: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[02:26] <zeroday> !ops | Giggs is spamming
[02:26] <ubotu> Giggs is spamming: Help! Mez, LjL, elkbuntu, imbrandon, DBO, gnomefreak, Hobbsee, rob, ompaul, Madpilot, Burgundavia, Seveas, CarlK, crimsun, ajmitch, tritium, Nalioth, thoreauputic, apokryphos, tonyyarusso, PriceChild, Amaranth, jrib, jenda, nixternal, Myrtti or mneptok
[02:26] <julian> bobos
[02:26] <ompaul> !es | julian
[02:26] <ubotu> julian: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[02:26] <south> hi
[02:26] <gordonjcp> has left #ubuntu [requested by ompaul] 
[02:26] <south> can i ask smthng..
[02:27] <gordonjcp> ^ somewhat euphamistic
[02:27] <julian> de dond e eres tu
[02:27] <gordonjcp> south: don't ask to ask ;-)
[02:27] <south> i have ati graphic card on my laptop..
[02:27] <south> ubuntu does not recognizes it
[02:27] <south> allright gordon :)
[02:28] <zeroday> south: what card?
[02:28] <zeroday> !ati | south
[02:28] <ubotu> south: To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto
[02:29] <south> can i use desktop effects with that?
[02:29] <zeroday> south: depends what card?
[02:30] <south> its brand new
[02:30] <zeroday> south: ati are notoriously bad with linux due to the fact that they make rubbish frivers
[02:30] <zeroday> *drivers
[02:31] <lemmy> Hi
[02:31] <rambo3> south, not from ati.com . use the "ati" from open source
[02:31] <lemmy> how can I set gcc permanently to 3.3 instead 4.1 on feisty?
[02:32] <crdlb> rambo3, the free driver won't work on a "brand new" card
[02:33] <south> hmm..
[02:33] <south> i think i'm lost
[02:33] <south> i just enter that adress..
[02:34] <south> and it says that open restricted device manager
[02:34] <south> i opened it..
[02:34] <south> and i see Ati Graphic Card..
[02:34] <south> says not in use..
[02:34] <south> thats all
[02:34] <crdlb> south, what's the output of: lspci|grep VGA ?
[02:35] <south> ATI Technologies Inc M66-P ATI Mobility Radeon X1700
[02:35] <crdlb> ok you definitely need to check the box in the restricted manager then
[02:36] <crdlb> to enable the driver
[02:36] <uakkeri> how to make thinkpad use the max fan speed
[02:36] <oipat> How do I chose what app should open what sorts of files? Currently png's are opened in firefox, which annoys me.
[02:36] <south> hmmm..
[02:36] <south> i think it started to download smthng
[02:36] <zeroday> oipat: right click > Properties > Open With
[02:36] <zeroday> and select your preferred program
[02:37] <south> can i download opera browser for ubuntu..
[02:37] <south> i enter the opera.com
[02:37] <zeroday> south: yes
[02:37] <south> and click download..
[02:37] <south> it downloaded but cannot be started
[02:37] <zeroday> south: type this in a terminal
[02:37] <oipat> zeroday: Doesn't really work out, I can open it in gqview, but It's still firefox by default :-\
[02:37] <ReServe2> Hi, I have finaly managed to set up BIND9. How do I get BIND to work with a adress without the www?
[02:38] <zeroday> "sudo apt-get install opera
[02:38] <mc44> oipat: right click, properties, you can change the default
[02:38] <newuser> help.... i need help installing ubuntu
[02:38] <south> E: Could not get lock /var/lib/dpkg/lock - open (11 Resource temporarily unavailable)
[02:38] <south> E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
[02:38] <oipat> great, thanks, mc44 :)
[02:38] <newuser> i have install vista in 1 hd but in another partition
[02:38] <mc44> south: do you have a package manager open?
[02:38] <aroo> south, you can't have something like Synaptic and apt-get running at the same time
[02:39] <zeroday> south: are you still running the ati thing?
[02:39] <zeroday> oipat: thats what i said :)
[02:39] <south> it finished now..
[02:39] <zeroday> south: if its fini than close it
[02:39] <zeroday> then try again
[02:39] <newuser> now i'm in step 4 of 7    and i have to choose guided - use entire disk  or   manual?
[02:40] <newuser> what should i chose?
[02:40] <LyleM> newuser, which guide
[02:40] <zeroday> newuser: you want to do guided resize
[02:40] <zeroday> LyleM: hes talking about the install steps
[02:40] <south> Package opera is not available, but is referred to by another package.
[02:40] <south> This may mean that the package is missing, has been obsoleted, or
[02:40] <south> is only available from another source
[02:40] <south> E: Package opera has no installation candidate
[02:40] <zeroday> newuser: and select how much goes to linux
[02:40] <ReServe2> entire disk is good if you dont have anything on the disk that you want to keep
[02:40] <zeroday> south: you need to enable all the repos
[02:40] <south> whats that
[02:41] <newuser> and i have to "choose guided - use entire disk"  or  " manual"?    i have prepared the partition for ubuntu
[02:41] <zeroday> south: have a look here for beginner help
[02:41] <ReServe2> is opera in backports?
[02:41] <Kede> hellow, help me please I cant change resolution of my Xorg ((
[02:41] <zeroday> south: gimme a min
[02:41] <IdleOne> !fixres | Kede
[02:41] <ubotu> Kede: The X Window System is the part of your system that's responsible for graphical output. To restart your X, type  sudo /etc/init.d/?dm restart  in a console - To fix screen resolution or other X problems: http://help.ubuntu.com/community/FixVideoResolutionHowto
[02:41] <zeroday> !fixres | Kede
[02:42] <Kede> thx
[02:42] <zeroday> south: have a look here it is very helpful http://ubuntuguide.org/wiki/Ubuntu:Feisty
[02:42] <JOnZ> starting dhcp server, is it possibul without cables inserted ??(i would like 2 test cuz i cant find me ol' switch!)
[02:42] <newuser> i have try both but i cannot find my partition  i have prepared
[02:42] <south> allright i am looking there
[02:42] <zeroday> newuser: you can do a manual partition
[02:42] <zeroday> newuser: easier to partition
[02:43] <letronje> hi, gnome-panel doesnot appear on ubuntu startup, anybody having similar problems?
[02:43] <zeroday> newuser: then click back and use the "free space" youve made with manual partition
[02:43] <ReServe2> are anyone here into BIND9?
[02:43] <zeroday> letronje: you can add it
[02:43] <letronje> the gnome-panel process is running but its not getting displayed. if i logout and login again, it works fine
[02:44] <zeroday> letronje: odd
[02:44] <varka> !anyone | ReServe2
[02:44] <ubotu> ReServe2: A large amount of the first questions asked in this channel start with "Does anyone/anybody..."  Why not ask your next question (the real one) and find out?
[02:44] <letronje> zeroday: its quite random actually
[02:44] <MegaIRC> hello
[02:44] <south> zeroday: what will i read here?
[02:44] <newuser> zeroday, i have chose manual ... and i cannot see my partition .. just /dev/sda
[02:44] <MegaIRC> someone can help me?
[02:44] <ReServe2> varka; I just did. nobody answered
[02:44] <zeroday> south: have a look in index
[02:44] <mc44> !ask | MegaIRC
[02:44] <ubotu> MegaIRC: Don't ask to ask a question. Just ask your question :)
[02:44] <letronje> zeroday: is there any way i can find out what the exact problem  is ?
[02:44] <ReServe2> I gues your bot has a reply for that too :D
[02:45] <zeroday> newuser: at the top u can select which hd
[02:45] <MegaIRC> have vista and installed ubuntu today and the boot of vista is gone can i do something to boot vista again without format?
[02:45] <zeroday> letronje: i would help u more but im kinda overwhelmed right now sorry :)
[02:46] <zeroday> MegaIRC: is it in grub?
[02:46] <IdleOne> !grub | MegaIRC
[02:46] <ubotu> MegaIRC: grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto
[02:46] <newuser> i only have 1 hd..  and it said 120034MB   no used
[02:46] <kraypius> how do I open a port with iptables ?
[02:46] <south> i am really confused lol
[02:46] <newuser> zeroday, i only have 1 hd..  and it said 120034MB   no used
[02:46] <zeroday> newuser: odd are you using xp or vista?
[02:46] <zeroday> south: :) dont be
[02:46] <newuser> vista
[02:46] <letronje> zeroday: ok, no problem :)
[02:46] <zeroday> south: gimme a min and ill try explain
[02:46] <predaeus_> !dualboot | MegaIRC
[02:46] <ubotu> MegaIRC: Dual boot instructions:  https://help.ubuntu.com/community/WindowsDualBootHowTo (x86/AMD64) - https://wiki.ubuntu.com/YabootConfigurationForMacintoshPowerPCsDualBoot (Macintosh)
[02:46] <zeroday> letronje: 1000 apologies
[02:47] <south> zeroday : allright, pm?
[02:47] <zeroday> south: sure are u registrered?
[02:47] <newuser> zeroday, i prepare the partition in raw.. is it a problem?
[02:47] <zeroday> !vista
[02:47] <ubotu> vista is the new operating system by the evil overlords from Redmond. For more information, see http://www.badvista.org
[02:47] <zeroday> lol
[02:47] <south> no..
[02:47] <roil13> i've tried to update some packages and i got this error message:
[02:47] <roil13> conflicting diversions involving `/ .' or `/ This module can be found as the module 'app/xmodmap' at'
[02:47] <roil13> E: Sub-process /usr/bin/dpkg returned an error code (2)
[02:47] <zeroday> south: join #guruhelp pls
[02:47] <roil13> can someone help me with this one?
[02:48] <sorsis> after i login and i see the splash screen, i see brown background. how do i change it?
[02:48] <MegaIRC> i try this way http://www.commonmancomputing.com/y/Learn/DualBootVistaandLinux/tabid/62/Default.aspx but it still didnt work
[02:48] <sorsis> i mean background color
[02:48] <kraypius> Does anyone know of a gui to iptables?
[02:48] <newuser> zeroday, i prepare the partition in raw.. is it a problem?
[02:48] <ReServe2> I have finaly managed to set up BIND9. It works when I use www.test.com to my apache server. But when I drop www the page is not loaded. how to I add just test.com to named record?
[02:49] <zeroday> sorsis: yeah it in System > Admin > login Window
[02:49] <zeroday> kraypius: firestarter
[02:49] <mc44> MegaIRC: did you mess around with the grub file?
[02:49] <zeroday> newuser: it maybe difficult
[02:49] <ganjaman> hi there
[02:49] <Pierre_N> ello
[02:49] <Pierre_N> how do I start dbus?
[02:50] <sorsis> i have changed login window but it's still brown. does loginwindow define the color of background while splash image is shown?
[02:50] <ReServe2> MegaIRC; how did you partition your disk under ubuntu install?
[02:50] <newuser> zeroday, so what should i do?  can i install ubuntu 1st and than install vista?
[02:50] <MegaIRC> i start using ubuntu only today
[02:50] <sorsis> zeroday: few lines upper
[02:50] <zeroday> newuser: i remember sumthing about vista being a pain 4 partitions gimme a min ill see what i can find
[02:51] <zeroday> sorsis: can u repeat pls?
[02:51] <newuser> zeroday, ok thanks
[02:51] <sorsis> zeroday: color behind the splash screen after logging in. is it part of gdm theme?
[02:52] <zeroday> sorsis: no System > Admin > Login Window > Local > Background color :)
[02:52] <zeroday> it affects that
[02:52] <zeroday> newuser: np gimme a few min pls
[02:53] <aldarsior> is there a way to change the module loading options for a module?
[02:53] <AnRkey> how do i edit the list of available repositories in the ubuntu network installer?
[02:54] <aldarsior> I believe that my 3c59x module is loaded by modules.conf, but I want it to be loaded in full_duplex=1 mode
[02:54] <roil13> i got this error:
[02:54] <roil13> dpkg: conflicting diversions involving `/ .' or `/ This module can be found as the module 'app/xmodmap' at'
[02:54] <roil13> E: Sub-process /usr/bin/dpkg returned an error code (2)
[02:54] <roil13> while trying to install a new package.
[02:54] <roil13> can anyone help me with that?
[02:54] <sorsis> zeroday: ty :)
[02:54] <rambo3> aldarsior, is it net module ?
[02:54] <aldarsior> rambo3: yep
[02:55] <zeroday> sorsis: welcome
[02:55] <rambo3> aldarsior, you need to set /etc/modprobe.d/options and update initrd
[02:55] <Enyo> Setting up DMRAID devices...                                                 invoke-rc.d: initscript dmraid, action "start" failed.
[02:55] <Enyo> dpkg: error processing dmraid (--configure):
[02:55] <Enyo>  subprocess post-installation script returned error exit status 1
[02:55] <Enyo> what do i need to do?
[02:55] <aldarsior> rambo3: thanks
[02:55] <zeroday> newuser: check out this guide :) http://apcmag.com/5046/how_to_dual_boot_vista_with_linux_vista_installed_first
[02:56] <rambo3> aldarsior: sudo update-initramfs -u
[02:58] <roil13> can anyone help me?
[02:59] <jaybabyblue> with what?
[02:59] <Frogzoo> Enyo: use mdadm ?
[02:59] <jaybabyblue> /leave
[02:59] <Enyo> Frogzoo:  yup and created a raid already
[02:59] <roil13> i'm trying to install and i got this error message:
[02:59] <roil13> dpkg: conflicting diversions involving `/ .' or `/ This module can be found as the module 'app/xmodmap' at'
[02:59] <roil13> E: Sub-process /usr/bin/dpkg returned an error code (2)
[02:59] <ubuntuEdgy> can i do a sum on the terminal
[03:00] <ubuntuEdgy> too lazy to get the calculator out
[03:00] <owner> I've lost the 3D cube on beryl (but everything else still works).. How do I get it back?.. Thanks
[03:00] <^peter^> To set up kde desktop, the help refers to kubuntu and "easily" installed add on to UBUNTU.  But I have gone around in circles trying to find what I need to download.
[03:00] <ReServe2> I have finaly managed to set up BIND9. It works when I use www.test.com to my apache server. But when I drop www the page is not loaded. how to I add just test.com to named record?
[03:00] <Frogzoo> ubuntuEdgy: hc at least
[03:01] <Frogzoo> ubuntuEdgy: bc, my bad
[03:01] <ubuntuEdgy> how ?
[03:02] <ReServe2> marve fleksnes?
[03:02] <ubuntuEdgy> its cant be done can it ?
[03:02] <marve> ReServe2: heh. nei
[03:03] <Frogzoo> ubuntuEdgy: the command is 'bc'
[03:03] <mc44> !kde  | ^peter^
[03:03] <ubotu> ^peter^: KDE (http://kde.org) is the !desktop environment used natively in !Kubuntu. To install from Ubuntu:  sudo apt-get install kubuntu-desktop , or see http://help.ubuntu.com/community/InstallingKDE) . Latest KDE version is 3.5.7 for Feisty, 3.5.6 for Edgy, and 3.5.5 for Dapper. See http://kubuntu.org) for more information.
[03:04] <^peter^> Thanks ubotu, I will look it out
[03:04] <yxa1ryggen> I run ubuntu and windows dualboot, ubuntu on hda and windows on hdb. A while ago windows dissapeared in the grub meny, so I wrote the boot-command for windows again in menu.lst, but now when I boot windows it say "Starting up..." and it just freezes
[03:04] <brainiac> Hey folks, I just did "sudo apt-get install apache2 php5 mysql-server phpmyadmin" and setup a joomla! site... works perfectly on local but wont show up when connecting through WAN... would anyone know why? is there anything I'd need to change in apache.conf?
[03:05] <yxa1ryggen> brainiac, Have you opened port 80 in the firewall?
[03:05] <Frogzoo> brainiac: what's the site ip address?
[03:06] <owner> My 3d cube on beryl has stopped working, anyone know a quick fix?
[03:06] <brainiac> no, where would I do that?
[03:06] <yxa1ryggen> brainiac, In the firewall config, do you have a router with a firewall in?
[03:06] <crdlb> owner, join #beryl
[03:07] <brainiac> router is on forward, ping works, where is the firewall.conf or how is the command to start the firewall conf?
[03:07] <rambo3> !xgl | owner
[03:07] <ubotu> owner: Compiz (compositing window manager) and XGL (X server architecture layered on top of OpenGL) - Howto at http://help.ubuntu.com/community/CompositeManager - See http://tinyurl.com/pw5ez for Kubuntu systems - Help in #ubuntu-effects
[03:07] <predaeus_> yxa1ryggen, does windows freeze or grub?
[03:07] <digitalspaghetti> Hey folks - I just got a brand new Dell PC.  When they set it up, they set up 2 SATA hd's in a RAID config, which I have disabled so I now have 2 drives.  I've installed Vista first, on the first drive, and then Ubuntu on the second with GRUB.  Problem is now that even though the vista entry is there, I get an error about winload.exe
[03:07] <yxa1ryggen> predaeus_, I think it is windows
[03:07] <digitalspaghetti> i've googled about it but can't find a consistant answer
[03:07] <mattl> hey ubuntuns.
[03:08] <predaeus_> yxa1ryggen, hm if it is grub, then maybe the partition number is wrong in the grub entry
[03:08] <DeliVeren> hi! how can I get the uuid number of a partition?
[03:08] <Frogzoo> DeliVeren: blkid
[03:08] <yxa1ryggen> predaeus_, no, I have tried with some partition numbers
[03:08] <predaeus_> yxa1ryggen, no idea what it could be if it is windows. maybe it must be on the first partition or something, or did it run from there earlier?
[03:08] <yxa1ryggen> its /dev/hdb1, which is hd(1,1) right?
[03:08] <brainiac> yxalryggen, router is on forward, ping works, where is the firewall.conf or how is the command to start the firewall conf?
[03:09] <DeliVeren> Frogzoo: thnxs
[03:09] <mattl> how can i best check that i have removed all the proprietary elements of Ubuntu?
[03:09] <yxa1ryggen> brainiac, If you have a firewall in your router you can config it when you surf in to 192.168.1.1 in your browser
[03:10] <HostilePenguin> 0,0
[03:10] <predaeus_> yxa1ryggen, not sure. look for a remapping command that changes the naming convention, I think there is also a file in the /boot/grub directory that shows the mapping. My feisty install was messed with wrong mappings because of a second HD.
[03:10] <brainiac> xyalryggen, the router is configured correctly... done it before and it worked with WinXP - XAMPP... must be something with my computer
[03:10] <intrepidus> Is there a way to VNC into a Windows machine running UltraVNC from Ubuntu?
[03:10] <yxa1ryggen> brainiac, ok, then I don't know howto help you, sorry
[03:11] <brainiac> xyalryggen, np thx anyway
[03:11] <yxa1ryggen> intrepidus, yes
[03:11] <zeroday> south01: you here?
[03:11] <south01> yep
[03:11] <intrepidus> yxa1ryggen, how?
[03:11] <zeroday> u neva responded in guru help
[03:11] <citiskyline_> What language(s) is Ubuntu written in?
[03:12] <zeroday> south01: soz thought i lost ya
[03:12] <yxa1ryggen> intrepidus, Just connect to the vnc-server from a linux vnc client?
[03:12] <buterfly_effect> server eu.irc.gr 6667
[03:12] <sTaTix> finally got my ubuntu up and running... it is badass
[03:12] <predaeus_> mattl, use synaptic and group by origin, might be your best chance. still you can't be sure there is nothing left since apt sometimes leaves things even with purge.
[03:12] <zeroday> citiskyline_: um gnome is C
[03:12] <r_a_f> citiskyline_: in all lang
[03:12] <sTaTix> thanks to everyone yesterday for your help
[03:12] <citiskyline_> zeroday, Ok.
[03:12] <intrepidus> yxa1ryggen, never used VNC on linux though...does it come with it?
[03:12] <citiskyline_> How can I type in Chinese and Pinyin in Ubuntu?
[03:12] <ubuntuEdgy> Frogzoo: thnk u
[03:13] <zeroday> citiskyline_: kk first install chinese language pack
[03:13] <kritzstapf> anyone knows a programm to strip a frequencyrange out of a soundfile?
[03:13] <seiflotfy> hey guys
[03:13] <ubuntuEdgy> hi
[03:13] <citiskyline_> zeroday, is that sudo apt-get install chinese?
[03:13] <yxa1ryggen> intrepidus, do you run ubuntu with gnome?
[03:13] <seiflotfy> who can i go to if i need  help compiling
[03:13] <intrepidus> yxa1ryggen, yep
[03:13] <sTaTix> is there a linux media player that support wmp11 cover art
[03:13] <Pici> !locale | citiskyline_
[03:13] <ubotu> citiskyline_: To set up and configure your locales, see https://help.ubuntu.com/community/LocaleConf
[03:13] <zeroday> citiskyline_: nope go to System > Admin > Lang Support
[03:14] <citiskyline_> zeroday, got it.
[03:14] <yxa1ryggen> intrepidus, go to Applications > Internet > Terminal Server Client
[03:14] <yxa1ryggen> I have never tried it but i think it works
[03:14] <south01> zeroday r u there?
[03:14] <zeroday> south01:
[03:14] <mezziah> sTaTix: dunno how wmp11 handles covers but amarok and rhythmbox support covers
[03:14] <seiflotfy> $ sudo ~/Desktop/GTKDC/gtkdc-0.2.1-pre5/configure
[03:14] <seiflotfy> checking for a BSD-compatible install... /usr/bin/install -c
[03:14] <seiflotfy> checking whether build environment is sane... yes
[03:14] <seiflotfy> checking for gawk... no
[03:14] <seiflotfy> checking for mawk... mawk
[03:14] <seiflotfy> checking whether make sets $(MAKE)... yes
[03:14] <yxa1ryggen> intrepidus, Switch protocoll to VNC
[03:14] <predaeus_> kritzstapf, audacity has FFT filter, maybe that can
[03:14] <zeroday> south01: sure to get "sudo apt-get install beryl" to get beryl
[03:14] <Pici> !paste > seiflotfy
[03:14] <citiskyline_> zeroday, it says
[03:14] <citiskyline_> zeroday, it says "language support not installed completely" should i install it?
[03:15] <intrepidus> yxa1ryggen, all I get is "Unknown authentication scheme from VNC server: -6"
[03:15] <zeroday> citiskyline_: sure
[03:15] <yxa1ryggen> intangir, ok, as I sayed before, I have never tried it :(
[03:15] <yxa1ryggen> intrepidus, Ask somebody else :(
[03:15] <intrepidus> Alright, thanks anyway. I'll hunt around some more :)
[03:15] <south01> zeroday : its downloading
[03:15] <zeroday> south01: great then you have beryl :)
[03:16] <citiskyline_> zeroday, it's still installing - after it's done, what do I do (Just to get ready) ;)
[03:16] <citiskyline_> zeroday, ok it's done
[03:16] <rebekah> hi all
[03:16] <ubuntuEdgy> hi
[03:16] <zeroday> citiskyline_: you installed chinese?
[03:16] <south01> zeroday : so i downloaded it installed..
[03:17] <rebekah> im having a problem connecting my zen vision M, ive installed gnomad2, but it still wont read the player? any idea?
[03:17] <citiskyline_> zeroday, not yet.. .it just said "language support not fully installed" and i installed it.... just ignore that then. what would the next step be?
[03:18] <newuser> can any one help me with broadcom eifi?
[03:18] <newuser> wifi i mean
[03:18] <zeroday> citiskyline_: tick chinese
[03:19] <citiskyline_> done
[03:19] <roaet> Hi! I have a serious issue.
[03:19] <Paddy_EIRE> newuser, have you tried using the windows driver with ndiswrapper
[03:19] <Keanu> Hello, I was getting support erlier for my copy of Ubuntu
[03:19] <zeroday> citiskyline_: then click apply
[03:19] <Keanu> Can anyone help continue that support?
[03:19] <Paddy_EIRE> !ask | Keanu
[03:19] <ubotu> Keanu: Don't ask to ask a question. Just ask your question :)
[03:19] <south01> zeroday : i installed..
[03:19] <citiskyline_> zeroday, ok. it's downloading
[03:19] <newuser> paddy_EIRE i don't know how to do it?
[03:19] <roaet> Yesterday I left my server and it was working ok, LAMP setup. I come back today and it appears that I cannot SSH in, webmin isn't working, phpmyadmin isn't working, PHP pages have the Read-only filesystem error for session variables.
[03:19] <zeroday> Keanu: unless that person is still here than no
[03:20] <roaet> It appears my filesystem is now read-only
[03:20] <south01> zeroday : can u join guruhelp
[03:20] <roaet> What the heck do I do?
[03:20] <zeroday> south01: start it with in terminal "beryl-manager"
[03:20] <rebekah> can anyone explain to me how to get the creative zen to conenct with gnomad2? its not working :(
[03:20] <zeroday> citiskyline_: great
[03:20] <zeroday> south01: going know :)
[03:20] <citiskyline_> zeroday, wow! 20 files! chinese is heavy
[03:20] <citiskyline_> ;)
[03:20] <rope> Hi, i got dapper base (without X) and i want to install XFCE, i did apt-get install xfce4 and xserver-xorg-core but i think something is missing. Can you help me?
[03:21] <citiskyline_> rope: try sudo apt-get install xubuntu-desktop
[03:21] <ubuntuEdgy> ?
[03:21] <Tom47> intrepidus: http://www.realvnc.com/products/free/4.1/winvnc.html
[03:21] <zeroday> citiskyline_: yeah it will take a while :)
[03:21] <Paddy_EIRE> newuser, https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx
[03:21] <Keanu> Sorry. x_x;;.. I'm not used to that sort of thing.. - My screen resolution is stuck at 800x600, i'm using Ubuntu server.. And the screen resolution is giving me a headache being 800x600, I need it to be atleast 1024x768.. But when I go into "system, Preferances, Screen resolution" I only get "800x600 and 640,480" in there. Can anyone help me fix that so I get 1024x780?
[03:21] <intrepidus> Tom47...?
[03:21] <zeroday> citiskyline_: once fini to type pinyin rite click any type window and select scim
[03:22] <Tom47> intrepids install that server in windows
[03:22] <Paddy_EIRE> Keanu, which graphics card are you using
[03:22] <Keanu> I have no idea.
[03:22] <intrepidus> Tom47, no, I'm already running a server.
[03:22] <Pici> !fixres | Keanu have you tried following this guide :
[03:22] <ubotu> Keanu have you tried following this guide :: The X Window System is the part of your system that's responsible for graphical output. To restart your X, type  sudo /etc/init.d/?dm restart  in a console - To fix screen resolution or other X problems: http://help.ubuntu.com/community/FixVideoResolutionHowto
[03:22] <intrepidus> UltraVNC has more features.
[03:22] <citiskyline_> zeroday, ok... hold on....
[03:22] <Keanu> I bought this server off ebay, but never got told my graphics card.
[03:22] <r_a_f> rope: first install x and after "sudo aptitude xubuntu-desktop'
[03:22] <Keanu> I'll check that out now
[03:22] <Tom47> intrepidus not sure if you received an alternative to yr earlier q but one answer is to install that server in windows
[03:22] <letronje> hey when is pidgin coming into feisty repositories ?
[03:22] <Tom47> intrepidus ah ok
[03:22] <citiskyline_> r_a_f: wouldn't it be "sudo apt-get...."
[03:22] <zeroday> citiskyline_: np but its getting late an i got skool 2morow :)
[03:22] <Paddy_EIRE> Keanu, follow the link Pici gave
[03:22] <citiskyline_> zeroday, what country?
[03:23] <zeroday> citiskyline_: singapore u?
[03:23] <intrepidus> Tom47: I more or less figured it out - Ubuntu ships with too old of a VNC viewer, but apparently it's the "newest" version.
[03:23] <citiskyline_> zeroday, Brazil
[03:23] <olskolirc> hi guys
[03:23] <zeroday> citiskyline_: lol
[03:23] <Keanu> Okay.. Its doing something.
[03:23] <whyameye> !smb
[03:23] <ubotu> samba is is the way to cooperate with Windows environments. Links with more info: https://wiki.ubuntu.com/MountWindowsSharesPermanently and http://help.ubuntu.com/ubuntu/serverguide/C/windows-networking.html - Samba can be administered via the web with SWAT
[03:23] <zeroday> citiskyline_: funniest part, im caucasion :)
[03:23] <olskolirc> how do i get the icons back on my menu and program menu bars?
[03:23] <citiskyline_> zeroday, wow... the ubuntu community sure is spread out
[03:23] <r_a_f> citiskyline_there 2 ways - in this case better is sudo aptitude ...
[03:23] <olskolirc> when i click the K program button, there is not icons on my menus
[03:23] <letronje> when my ubunu starts, the gnome-panel process is running but the panel is not getting displayed. if i logout and login again, it works fine. also, this behaviour is random and most of the times the panel works fine on boot
[03:24] <JamEs_yAP> can someone teach me how to use ubuntu LIVE CD
[03:24] <Miles_Prower> How can I play RealPlayer files using Totem?
[03:24] <zeroday> citiskyline_: lol ")
[03:24] <Paddy_EIRE> !codecs
[03:24] <ubotu> For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats
[03:24] <rope> r_a_f: Wich is the package for X ?
[03:24] <Keanu> @pici - I just typed that into Terminal... Its completly wiped my screen.. And now its not doing anything...
[03:24] <citiskyline_> zeroday: ok. so the chinese install is done
[03:24] <zeroday> citiskyline_: great
[03:25] <citiskyline_> zeroday: so what do I do now?
[03:25] <citiskyline_> zeroday: I don't really understand the "right-click a window and select scim" thing
[03:25] <durab> my display is all crazy colors for some reason, can anyone give me a hand to find out where to enable XDMCP for login?
[03:25] <zeroday> citiskyline_: right click any type window and select scim from Input Methods
[03:25] <Paddy_EIRE> newuser, how are you getting on, the broadcom wifi driver is a simple one to sort
[03:25] <durab> ill get vnc working instead of buying a new card
[03:26] <citiskyline_> zeroday, I got that. now what? :)
[03:26] <zeroday> type pinyin
[03:26] <zeroday> i think lol
[03:26] <Keanu> Any idea anyone? Screen has just went blank but background and mouse are still there after I typed: "sudo /etc/init.d/?dm restart" into Terminal.
[03:26] <citiskyline_> zeroday: how do i get the accents?
[03:27] <newtubuntu> Trying to install Ubuntu for the first time on a brand new Dell. I partitionned my drive in Vista, freed some space (140Gb) and launched my ISO CD. The CD works fine, but Ubuntu offers me just 640X480 or 800X600 screen resolution for install/setup on a large screen display. So I am stuck because I can't get to an 'OK' button in regional settings window.... I can't scroll down.
[03:27] <Paddy_EIRE> Keanu, press ctrl + alt + backspace then log back in here
[03:27] <streamlined> whats the trick to getting the grub entry for a partition? im trying to re-add my vista entry after it mysteriously dissapeared. Currently the vista boot is on sda6. I have one sata hard disk.
[03:27] <streamlined> i tried sd0,6
[03:27] <mok0> Has anyone here experience with installing NVidia drivers?
[03:27] <Keanu> Erm?...
[03:28] <streamlined> mok0: i have
[03:28] <Keanu> Onto the IRC? Or the ubuntu?
[03:28] <Johto> prolly 99%  have installed nvidia drivers :)
[03:28] <mok0> streamlined: Via .debs?
[03:28] <Paddy_EIRE> Keanu, both, as it restarts X
[03:28] <JamEs_yAP> i have ATI RADEON 9250 256MB VIDEO CARd i got this problem Cannot START X
[03:28] <streamlined> mok0: at that time i had to get the extra repo configured. not sure about feisty
[03:28] <Keanu> I just tried that, and its not doing anything,
[03:29] <Paddy_EIRE> JamEs_yAP, those normally work out of the box
[03:29] <mok0> streamlined: what is the repo?
[03:29] <citiskyline_> zeroday: !
[03:29] <streamlined> mok0: you will have to google, im using an ati card now
[03:29] <newtubuntu> I need help for a fresh install
[03:29] <Paddy_EIRE> Keanu, you have held ctrl+alt+backspace
[03:29] <citiskyline_> zeroday: that means "hello" in chinese
[03:29] <JamEs_yAP> Paddy_EIRE but it say SERVER X cannot START or something its not configure
[03:29] <mok0> streamlined: ok will do.
[03:29] <newtubuntu> is anyone available for a 'short private chat' ?
[03:29] <streamlined> anyone know what sda6 would be in grub? is this (sd0,6) ?
[03:30] <Paddy_EIRE> newtubuntu, did you follow the guide
[03:30] <hylje> newtubuntu: just ask, dont ask to ask
[03:30] <wols> streamlined: mmost probably (hd0,5)
[03:30] <Keanu> I had to reset my whole machine >.>
[03:30] <r_a_f> citiskyline_: xserver-xorg
[03:30] <ubuntuEdgy>  mok0: search for envy
[03:30] <newtubuntu> Trying to install Ubuntu for the first time on a brand new Dell. I partitionned my drive in Vista, freed some space (140Gb) and launched my ISO CD. The CD works fine, but Ubuntu offers me just 640X480 or 800X600 screen resolution for install/setup on a large screen display. So I am stuck because I can't get to an 'OK' button in regional settings window.... I can't scroll down.
[03:30] <wols> !envy
[03:30] <ubotu> envy is a script that may leave you envious of those who have not used it, use the resticted manager to install binary drivers or use the instructions on the wiki, this script may break your machine very badly!
[03:30] <Cocoon> streamlined: if i remember correctly, computers count from 0, try using "sda0,5" - sda0,0 would be the sda1, sda 0,5 would be sda6
[03:30] <citiskyline_> r_a_f: what?
[03:30] <JamEs_yAP> r_a_f thats it i need that xserver-xorg too
[03:30] <wols> Cocoon: no
[03:31] <JamEs_yAP> how can i get install that
[03:31] <r_a_f> citiskyline_: package of X
[03:31] <Paddy_EIRE> newtubuntu, hold alt then drag the window about
[03:31] <Cocoon> no? ok, just a thought
[03:31] <wols> x-window-system is X
[03:31] <streamlined> wols: thanks
[03:31] <wols> or rather its metapackage
[03:31] <Keanu> @Paddy_EIRE - Do you think anything on the disk would help?
[03:31] <streamlined> Cocoon: thanks also ;)
[03:31] <newtubuntu> Paddy_EIRE: How ?  I can't get to the bottom of the window
[03:31] <durab> I need to enable XDMCP, pretty much blind as my display is freaking out can someone help please
[03:32] <JamEs_yAP> i need help here about my video card SERVER X cannot start need confgure can anyone guide me ?
[03:32] <newtubuntu> Does this mean Ubuntu doesn't recognize my video card already ?
[03:32] <mangojambo> Hi people, I want to know a good and easy dvd authoring program for linux ...
[03:32] <Paddy_EIRE> newtubuntu, hold alt then click anywhere on the window to move it up so you can click OK
[03:32] <Paddy_EIRE> Keanu, type this into a terminal gksudo gedit /etc/X11/xorg.conf
[03:32] <wols> Keanu: lspci. what videocard is it?
[03:32] <Keanu> Because when it was installing the ubuntu - It had 640x480 800x600 and 1024x760.. I pressed enter on the 1024x760.. So i'm guessing it didn't install it...
[03:33] <Keanu> I don't know what video card I have, is there a way to find out?
[03:33] <bulmer> lspci
[03:33] <Paddy_EIRE> Keanu, then copy the contents and paste it here > http://paste.ubuntu-nl.org/
[03:33] <JamEs_yAP> maybe Keanu we have same problem im using ATI RADEON
[03:33] <Keanu> Okay
[03:33] <JamEs_yAP> and we have same problem
[03:33] <Keanu> Maybe.
[03:33] <newtubuntu> Paddy_EIRE, thank you, I will go now and try. What APP should I use to access mIRC #ubuntu while on the install CD-ROM ? (don't want to log out and boot Vista each time I have a question)
[03:33] <wols> JamEs_yAP: what radeon?
[03:33] <Keanu> I dunno what graphics card I have. So I may do.
[03:33] <JamEs_yAP> ATI RADEON 9250
[03:33] <Paddy_EIRE> newtubuntu, use gaim
[03:34] <streamlined> wols: i just checked my grub menu.lst and my current ubuntu install is on hd0,5
[03:34] <JamEs_yAP> The error is cannot start X
[03:34] <wols> JamEs_yAP: you dpgk-reconfigure xserver-xorg. there choose "ati" or "radeon"
[03:34] <Paddy_EIRE> JamEs_yAP, your problem is different than Keanu
[03:34] <wols> streamlined: and? I already said that
[03:34] <JamEs_yAP> yah i try to reconfigure x
[03:34] <streamlined> wols: so sda6 cant be that. I received sda6 by doing grep sd /proc/partitions
[03:34] <newtubuntu> Paddy_EIRE, thank you. I should be back in a few 'from my Ubuntu' CD-ROM  :-)
[03:35] <blackkky> what good codec there's for totem?
[03:35] <blackkky> video codec..
[03:35] <JamEs_yAP> but in the end im stuck in a prompt
[03:35] <Paddy_EIRE> newtubuntu, no probs
[03:35] <wols> streamlined: do you have more than one disk?
[03:35] <streamlined> wols: i need to boot my windows partition which is apparantly on sda6
[03:35] <JamEs_yAP> something overwrite
[03:35] <jetscreamer> xvid
[03:35] <streamlined> wols: no
[03:35] <wols> streamlined: then it is hd0,5
[03:35] <jetscreamer> wols wtf are you doing in here
[03:35] <jetscreamer> :)
[03:35] <streamlined> wols: can more than one os be set on the same partition?
[03:35] <mezziah> blackkky: try totem-gstreamer and totem-xine
[03:36] <captus> someone here that knows how i can make fetchmail NOT download the mail from the server, in other words, leave a copy at the server?
[03:36] <wols> streamlined: not usually
[03:36] <streamlined> wols: that doesnt seem right
[03:36] <Paddy_EIRE> streamlined, no
[03:36] <mezziah> i found them using 'apt-cache search totem'
[03:36] <wols> streamlined: on which partition is your ubuntu then? (in linux terms)
[03:36] <streamlined> grub says hd0,5 one sec
[03:36] <Keanu> Okay, the link is http://www.pastebin.com/931939
[03:37] <Paddy_EIRE> Keanu, 1 sec
[03:37] <Keanu> Okay.
[03:37] <cycom> How can I make a drive show up on my desktop like an automounted drive (and also in /media/ ) rather than only in media?
[03:37] <Keanu> Man looking from one screen to another is giving me a headache
[03:37] <streamlined> !
[03:37] <wols> Keanu: what is the lspci output?
[03:37] <pedroVOX> hello...I am Mac (ermm a newbie...) heheh
[03:38] <jetscreamer> cycom: that doesn't really make sense to me
[03:38] <Keanu> !? 1spci!?
[03:38] <ubotu> Sorry, I don't know anything about 1spci!? - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[03:38] <jetscreamer> Lspci
[03:38] <jetscreamer> l
[03:38] <fsckr> !lspci
[03:38] <ubotu> Sorry, I don't know anything about lspci - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[03:38] <fsckr> :O
[03:38] <durab> run that command keanu
[03:38] <daquino> why is this telling me that im not authorized to startup a x session ?
[03:38] <Pici> Keanu: its a console command
[03:39] <Keanu> Erm..
[03:39] <durab> it will tell you about things on the pci bus
[03:39] <Keanu> Okay Lspci
[03:39] <pedroVOX> hello...I am Mac (ermm a newbie...) heheh
[03:39] <Pici> pedroVOX: do you have a question?
[03:39] <bullgard4> lspci -vv prints: "0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRIV (ICH6 Family) SMBus Controller (rev 03)." Where is explained what domain=0000 means?
[03:39] <durab> applications -> accessories ->terminal
[03:39] <pedroVOX> not for now...thnx!
[03:39] <durab> lspci
[03:39] <Paddy_EIRE> Keanu, applications > accessories > terminal
[03:39] <Keanu> http://www.pastebin.com/931940 - Thats the result from lspci
[03:40] <streamlined> wols: parted say /dev/sda: 1,6 and 7 are linux, and windows is on /dev/sda:5 and 2
[03:40] <osis> osis@osis-laptop:~$ sudo depmod -ae
[03:40] <osis> osis@osis-laptop:~$ sudo modprobe fglrx
[03:40] <osis> osis@osis-laptop:~$ lsmod | grep fglrx
[03:40] <osis> osis@osis-laptop:~$ cd /lib/modules/2.6.20-16-generic/misc
[03:40] <osis> osis@osis-laptop:/lib/modules/2.6.20-16-generic/misc$ sudo insmod fglrx.ko
[03:40] <osis> osis@osis-laptop:/lib/modules/2.6.20-16-generic/misc$ lsmod | grep fglrx
[03:40] <osis> fglrx                 652512  0
[03:40] <osis> agpgart                35400  2 fglrx,ati_agp
[03:40] <citiskyline_> how can I type in pinyin?
[03:40] <osis> hello
[03:40] <Pici> !paste | osis
[03:40] <osis> everybody
[03:40] <osis> i have a little problem
[03:40] <osis> with loading fglrx module
[03:40] <ubotu> osis: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic)
[03:40] <mezziah> duuhh.. osis, use pastebin
[03:40] <osis> modprobe doesn't give any error messages, so it should be loaded, but lsmod shows that it isn't loaded
[03:40] <osis> if i execute command insmod fglrx.ko everything works fine
[03:40] <osis> but i would the module allready to be loaded during startup
[03:40] <osis> fglrx is added in /etc/modules and restricted drivers are disabled
[03:40] <Keanu> >.>
[03:40] <osis> the driver version is 8.37.6
[03:40] <Paddy_EIRE> !enter | osis
[03:40] <ubotu> osis: Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation!
[03:40] <Keanu> Can't ya do that oneline thing to him?
[03:40] <Keanu> Thanks.
[03:40] <brainiac> Is there anyone in here how is well trained using the apache modul in webmin?
[03:41] <streamlined> wols: (repeat due to flood) parted says /dev/sda: 1,6 and 7 are linux, and windows is on /dev/sda:5 and 2
[03:41] <osis> ok, I'm just for the first time using irc
[03:41] <citiskyline_> If anyone knows how to type in pinyin under Ubuntu, please help :)
[03:41] <wols> streamlined: and what does mount say where /sda6 is mounted?
[03:41] <Paddy_EIRE> Keanu, did you enable the restricted driver?
[03:41] <brainiac> Is there anyone in here who is well trained using the apache modul in webmin?
[03:42] <Keanu> Erm? Enable what?
[03:42] <jetscreamer> !webmin
[03:42] <ubotu> webmin is no longer supported in Debian and Ubuntu. Please avoid using it.
[03:42] <Keanu> I couldn't see anything you typed cause of that spam. >.>
[03:42] <wols> Keanu: sudo dpkg-reconfigure xserver-xorg in the terminal. ther choose "ati" for a videocard
[03:42] <Keanu> Okay - I'll check
[03:42] <Paddy_EIRE> Keanu, System > Administration > Restricted Drivers Manager
[03:42] <wols> Paddy_EIRE: there is no restricted driver
[03:42] <brainiac> jetscreamer: see pm
[03:42] <Paddy_EIRE> wols, for a rage card?
[03:42] <wols> Paddy_EIRE: look at the card. it's a rage 3d
[03:43] <bobbob1016> I have two issues, I can't change file associations, even after I open the "Open With" tab, I can't select any of the other programs listed there.
[03:43] <Keanu> Okay, i'm doing that now Wols
[03:43] <wols> Paddy_EIRE: how old is a rage 3d card?
[03:43] <streamlined> wols: thats mounted on /
[03:43] <Paddy_EIRE> wols, oh I see
[03:43] <Keanu> What should I call "Identifier"
[03:43] <bobbob1016> The second is that I can't do control+click to select multiple files
[03:43] <streamlined> wols: /dev/sda2 and /dev/sda5 are windows
[03:43] <wols> streamlined: so it's oyur linux as I told you sda6 = hd0,5
[03:43] <brainiac> jetscreamer /j #webmin?
[03:44] <streamlined> wols: I NEED WINDOWS not linux
[03:44] <Keanu> Okay, it asks for a PCI Card bus identifer.
[03:44] <streamlined> wols: im trying to boot windows in grub
[03:44] <Paddy_EIRE> Keanu, accept the default
[03:44] <Keanu> Okay
[03:44] <Keanu> Amount of memory?
[03:44] <daquino> help....
[03:44] <jetscreamer> brainiac: i'm not the one using webmin that was....
[03:44] <Paddy_EIRE> Keanu, enter
[03:44] <wols> streamlined: 15:29 < streamlined> anyone know what sda6 would be in grub? is this (sd0,6) ? is what you asked and is what I answered. either you ask proper quetions or the asnwers won't help
[03:44] <Keanu> Erm, kernel?
[03:44] <brainiac> hm... k
[03:45] <wols> stevej: which one do you want to boot? sda2 oe sda5?
[03:45] <Keanu> Kernel frame buffer
[03:45] <kdubois> sd0,5 i think...
[03:45] <jetscreamer> you
[03:45] <brainiac> Is there anyone in here who is well trained using the apache modul in webmin?
[03:45] <wols> Keanu: amount of memory, keep empty
[03:45] <wols> Keanu: no
[03:45] <Keanu> Okay
[03:45] <Keanu> auto detect keyboa... I can do that part :P
[03:45] <Paddy_EIRE> Keanu, mostly accept the default values
[03:45] <wols> Keanu: where are you from? what country?
[03:46] <Keanu> Configureing xserver-xorg mouse port?
[03:47] <Keanu> England
[03:47] <wols> there is already something in htere
[03:47] <Keanu> Iv went through most of the stuff
[03:47] <wols> england has a pc102 keyboard afaik
[03:47] <Keanu> Ah >.>..
[03:47] <Keanu> It says dev/
[03:48] <Keanu> it says Mouse port: /dev/input/mice
[03:48] <bobbob1016> I have two issues, first I can't change file associations, even after I open the "Open With" tab, I can't select any of the other programs listed there.  Second is that I can't do control+click to select multiple files
[03:49] <osis> http://paste.ubuntu-nl.org/26265/
[03:49] <Keanu> But I don't know what one to get.
[03:49] <Keanu> It says these: /dev/psaux, dev/ttys0, dev/tts0, dev/, gpmdata
[03:50] <wols> Keanu: and what it says is already right. why do you ask us?
[03:50] <Keanu> Because it gives me a list.
[03:50] <wols> all you had to do was change your videoacrd and possibly monitor. rest leave alone
[03:50] <Keanu> Ah okay
[03:50] <Keanu> So just keep hitting enter.
[03:51] <citiskyline_> how can I type in pinyin in ubuntu?
[03:51] <mezziah> what is 'pinguin' supposed to be?
[03:51] <Paddy_EIRE> Myrtti, what is it with knitting?
[03:51] <citiskyline_> mezziah, not pinguin - it's "pinyin" - it's romanization of Chinese characters
[03:51] <citiskyline_> ;)
[03:52] <Keanu> AHH my god!
[03:52] <mezziah> oh sorry, my fault
[03:52] <Keanu> It still hasn't worked.
[03:52] <citiskyline_> mezziah, it's ok
[03:52] <Paddy_EIRE> Keanu, patience young padawan
[03:52] <Paddy_EIRE> :P
[03:52] <Keanu> Is something I don't have.
[03:52] <wols> citiskyline_: http://www.mrbass.org/linux/ubuntu/scim/
[03:52] <Keanu> Iv gotta go grab a drink and my glasses. Iv got the worst headache ever.
[03:52] <wols> Keanu: have you restarted X?
[03:53] <citiskyline_> wols, is that typing in Pinyin or characters?
[03:53] <Paddy_EIRE> Keanu, in linux you will develop superhuman patience
[03:53] <hurrrf> is there a preferred gui download manager for gnome?
[03:53] <wols> citiskyline_: I don't know. I'm from europe. how about reading it yourself?
[03:53] <Paddy_EIRE> hurrrf, gwget and freeloader are both great
[03:54] <Cocoon> hurrrf: i prefer d4x. handles resumes well
[03:54] <wols> I mean  "ubuntu pinying" goolging would have found you that in ubuntu SCIM is used and then "ubuntu scim" would find that howto
[03:54] <wols> basic googling
[03:54] <hurrrf> thanks to both of you
[03:54] <citiskyline_> wols, I did look on Google... didnt find anything :(
[03:55] <Paddy_EIRE> hurrrf, freeloader also supports torrents btw
[03:55] <hurrrf> I have a plan to repurpose some hardware into a torrentflux box if I get the time to hack it up
[03:55] <wols> citiskyline_: have you now found something?
[03:56] <hurrrf> I did that under edgy but the old machine I had, had some intermittent hardware rebooty style problem
[03:56] <rOb3rt> i need help i cant able to run my LIVE CD it say Failed to start X
[03:56] <Keanu> I can't belive this
[03:56] <Keanu> Its so difficult
[03:56] <Keanu> Just to change my screen resolution.
[03:56] <citiskyline_> wols, nope
[03:56] <citiskyline_> :(
[03:57] <wols> citiskyline_: what about the url I gave you?
[03:57] <citiskyline_> oh well, i'll try later
[03:57] <rOb3rt> wols
[03:57] <rOb3rt> can you help me for a while
[03:57] <Keanu> I
[03:57] <wols> rOb3rt: not unless you ask me a question
[03:57] <Keanu> Really don't understand why its so difficult, just to change my screen resolution.
[03:57] <roe_> Keanu, it isn't difficult at all, it is just a flat config file /etc/X11/xorg.conf
[03:57] <rOb3rt> i cant able to run my LIVE CD its say failed to start X
[03:57] <wols> Keanu: stop whining
[03:57] <Keanu> Iv configed that
[03:58] <roe_> Keanu, then restart X
[03:58] <wols> Keanu: you haven't restarted X
[03:58] <Keanu> Whats the command to restart X then?
[03:58] <\\kumjam> 
[03:58] <mezziah> ctrl+alt+backspace
[03:58] <mapez> ahaha.. sorry Keanu, but yeah.. restart X
[03:58] <rOb3rt> thats it
[03:58] <wols> r0bby: there should be more to the error
[03:58] <Keanu> Okay, i'll try that now
[03:58] <rOb3rt> how can i RESTART X
[03:58] <roe_> crtl -alt - <backspace>
[03:58] <Paddy_EIRE> Keanu, then check screen resolution in preferences to see if its there
[03:58] <wols> r0bby: where are you now? a console prompt?
[03:58] <Paddy_EIRE> Keanu, after restarting X that is
[03:59] <\\kumjam> Hi loo
[03:59] <rOb3rt> i try ctrl alt backspace nothing HAPPENs
[03:59] <wols> Keanu: you have set your screen res in 1024x768 in dpkg-reconfigure, yes?
[03:59] <Keanu> No difference, its not in the the screen resolution either.
[03:59] <Keanu> dpkg-reconfigure?
[03:59] <wols> Keanu: I asked you a question
[03:59] <wols> the command youe xecuted earlier?
[03:59] <rOb3rt> is there another way to RESTART X ?
[03:59] <herbaliser> hi can anybody tell me how i can resize my root partition without losing data, or point me to good resource
[04:00] <Keanu> Yeah, its all set in there.
[04:00] <wols> rOb3rt: not until you answer my question
[04:00] <rOb3rt> wols i have same problem w/ Keanu
[04:00] <wols> herbaliser: gparted
[04:00] <Frogzoo> herbaliser: boot a live cd - run gparted - resize root partition
[04:00] <wols> r0bby: no you don't. eithre answer my question or don't talk to me
[04:00] <NeoGeo64> www.linuxgenuineadvantage.org
[04:00] <rOb3rt> wols i try dpkg-reconfigure xserver-xorg
[04:00] <Paddy_EIRE> Keanu, and you have restarted X
[04:00] <wols> rather: rOb3rt:
[04:00] <herbaliser> gparted can resize?
[04:00] <Keanu> >.> R0b3rt. Just press CTRL+ALT+ Backspace, its not difficult.
[04:00] <Keanu> Yep, restarted it.
[04:00] <herbaliser> don't have to use fdisk
[04:01] <Paddy_EIRE> Keanu, and checked resolution
[04:01] <rOb3rt> wols ? u aint ask me any question my god
[04:01] <Keanu> Check.
[04:01] <Keanu> (Done)
[04:01] <jamman> BlueDevil, are you the one i was helping last night?
[04:01] <wols> Keanu: no you haven't restarted X. exit X. go back to gdem the login prompt. then press "ctrl+alt+f2". ther log in and then run "suod /etc/init.d/gdm restart". then press ctrl+alt+f7"
[04:01] <herbaliser> ext3 file system
[04:01] <wols> r0bby: yes I did
[04:01] <bobbob1016> I have two issues, first I can't change file associations, even after I open the "Open With" tab, I can't select any of the other programs listed there.  Second is that I can't do control+click to select multiple files.
[04:02] <Keanu> ...Okay, but.. You said to restart X press CTRL+Alt+Backspace?
[04:02] <wols> but since you have such a l337 nick, the nick complete won't work very well
[04:02] <bayzider> How do you install usplash themes?
[04:02] <Paddy_EIRE> Keanu, then the only other thing that I can recommend is removing the resolutions that you dont want and restarting x then, but that may display nothing if for whatever reason its not supporting your res
[04:02] <wols> so have be l337 and let me be
[04:02] <tyler_d> Installing an intel cs120 webcam?
[04:02] <newtubunt5> I'm back :-)
[04:02] <Keanu> Okay, i'll do all that now
[04:02] <tyler_d> anyone know where I would even start?
[04:02] <BlueDevil> jamman: no
[04:03] <wols> tyler_d: for exampple www.google.com "Ubuntu Intel cs120"
[04:03] <tyler_d> wols: wow good work thar buckwheat
[04:03] <NET||abuse> Hi guys, i'm having huge issues with getting the latest democracy to work, i've deleted it, made sure my local database is gone so it recreates the /home/me/.democracy directory..  and this is the output from running `democracyplayer` http://pastebin.com/931951
[04:03] <tyler_d> wold: anyone else?
[04:03] <wols> !language | tyler_d
[04:03] <ubotu> tyler_d: Please watch your language and keep this channel family friendly.
[04:03] <rOb3rt> My Problem is i configure everything using dpkg-reconfigure xserver-xorg but it stuck me in a prompt saying something overwrite and i try ctrl+alt+backspace nothing happens still there
[04:03] <kupesoft> How do I get rid of <device>:avah
[04:04] <ootput> hi guys, i've got ubuntu running perfectly on my home box. At my dorm, I'm setting up a different distro for a mate. With ubuntu's installation, one of the final steps involved installing a bootloader. Ubuntu made it very easy to dualboot with windows. The distro I'm setting up doesn't have such a feature during it's install. Do any of you know how Ubuntu works it's voodoo on menu.lst?
[04:04] <kupesoft> How do I get rid of <network device>:avah - for example, eth0:avah?
[04:04] <newtubunt5> OK, I'm here from my CD-ROM now, which is good news I guess since it means my internet connection was already detected. Wow, a breeze. Is it normal that I can only choose between 640X480 and 800X600 from my resolutions list ?
[04:04] <jamman> BlueDevil, sorry, the person i was helping was BlueD, I assumed it was you.
[04:04] <Paddy_EIRE> ootput, which distro
[04:04] <wols> ootput: ask the distro you're installing. not #ubuntu
[04:04] <ootput> Paddy_EIRE: a debian derivative (Gnoppix)
[04:04] <Keanu> Okay... I did all that you said Wols, now its left me with a blank screen going "_"
[04:04] <ootput> wols: pardon me
[04:05] <wols> kupesoft: how di dyou create that interface? usually it's by editing /etc/network/interfaces
[04:05] <kupesoft> wols: No, it was automatically created!
[04:05] <wols> ootput: ubuntu uses ubuntu/debian specific installs cripts
[04:05] <wols> kupesoft: by what?
[04:05] <jamman> wols, do you want me to take over one of your help topics?
[04:05] <kupesoft> wols: By booting feisty fawn!
[04:05] <jamman> wols, you seem to be helping a lot of people.
[04:05] <wols> jamman: feel free. why do you even ask?
[04:05] <NET||abuse> so is anyone else able to get democracy 0.9.6
[04:05] <ootput> he must be retired
[04:05] <newtubunt5> Running from CD now:   Is it normal that I can only choose between 640X480 and 800X600 from my resolutions list ?
[04:05] <jamman> wols, to be polite.
[04:05] <roland_> hi
[04:05] <ootput> or extremely bored
[04:06] <wols> kupesoft: linux or ubuntu doesn't create sub interfaces for nothing
[04:06] <Keanu> Okay... So... Iv got a blank screen... Is this called "Reseting X"
[04:06] <kupesoft> wols: Yeah, it's part of ahavi
[04:06] <kupesoft> wols: Yeah, it's part of avahi...
[04:06] <Tom47> ootput http://apcmag.com/dualboot
[04:06] <bobbob1016> I have two issues, first I can't change file associations, even after I open the "Open With" tab, I can't select any of the other programs listed there.  Second is that I can't do control+click to select multiple files.
[04:06] <RabidGoblin> hey, i just installed the ATI driver.  I have two video cards, the Radeon X1600 and some on board video card.  For some reason the system uses the driver for the video card I'm not using (vesa).  How should I fix this?
[04:06] <jamman> Keanu, try Ctrl+Alt+F7
[04:06] <wols> then uninstalla avahi again, or ask avahi how they created it. if avahi is a debi it should work autoamtically. if not file a bug report
[04:06] <NET||abuse> the democracy release 0.9.6 i'm getting is coming from ftp.osuosl.org feisty ubuntu repo
[04:06] <Keanu> ...
[04:07] <Keanu> Please don't tell me its gotten rid of gnome..
[04:07] <jamman> Keanu, is it still blank?
[04:07] <Keanu> I just pressed alt+f4
[04:07] <jamman> Keanu, no, im sure it's not gotten rid of gnome.
[04:07] <Keanu> Well
[04:07] <wols> Keanu: what is on screen right now?
[04:07] <ziroday> south01: hey
[04:07] <jamman> Keanu, try Ctrl+Alt+F7
[04:07] <Keanu> ubuntu 7.04 ubuntu-serv tty4
[04:07] <south01> ziroday hey
[04:07] <ootput> Tom47: thanks
[04:07] <ziroday> south01: did u get beryl?
[04:08] <wols> Keanu: log in and do wjhat I tol you earlier. log in restart gdm and press ctrl+alt+f7
[04:08] <south01> ziroday: not yet, its a bit tough
[04:08] <Keanu> ubuntu-serv login: keanu blah blah... keanu@ubuntu-serv:~$:
[04:08] <Keanu> I did that
[04:08] <ziroday> south01: did ya go to #beryl?
[04:08] <jamman> Keanu, ok did you switch to tty7?
[04:08] <Keanu> When I press ctrl+alt+f7 it leaves me with a blank screen.
[04:08] <south01> ziroday: yes and they just sent a website..
[04:08] <wols> Keanu: you said you pressed alt+f4. I never told you to do that
[04:09] <Keanu> Its the only way to get someting onto my screen though. >..
[04:09] <ziroday> south01: what site?
[04:09] <Keanu> >.>*
[04:09] <newtubunt5> should I be able to get better resolution when running from CD ? or 800X600 is normal ?
[04:09] <Cocoon> doesn't installing ubuntu-server get rid of the GUI?
[04:09] <south01> ziroday : come to guruhelp pls :)
[04:09] <jamman> Keanu, press Ctrl+Alt+F1
[04:09] <wols> newtubunt5: this depends on your VESA BIOS and monitor
[04:09] <ziroday> south01: np
[04:09] <Keanu> Okay
[04:09] <wols> Cocoon: no
[04:09] <Keanu> Oka,y it says iv gotta login.
[04:09] <jamman> Keanu, now login
[04:09] <Cocoon> wols: thanks, just checking on something here
[04:09] <Keanu> Okay
[04:10] <jamman> Keanu, next, type "sudo /etc/init.d/gdm restart"
[04:10] <wols> Keanu: do it. then "sudo /etc/init.d/gdm restart" , ctrl+alf+f7
[04:10] <Keanu> Now it says keanu@ubuntu-serv:~$
[04:10] <Keanu> Okay
[04:10] <wols> *ctrl+alt+f7
[04:10] <jamman> Keanu, anything?
[04:10] <Keanu> Okay
[04:10] <Keanu> Its loading gnome agian
[04:10] <jamman> Keanu, good.
[04:10] <Keanu> Just logged in
[04:11] <jamman> Keanu, ok, any other problems?
[04:11] <Keanu> Well, none of this has helped my screen resolution..
[04:11] <gbw> hello, if i have a pre compiled binary, can i know which library it is using?
[04:11] <Keanu> Its still 800x600.. and it gives me a headache...
[04:11] <newtubunt5> VESA BIOS ?
[04:11] <gbw> i meant, with which library was it being compiled
[04:11] <jamman> Keanu, go to System -> Preferences -> Resolution
[04:11] <Keanu> Just did
[04:12] <livecd> help.  I'm trying to install Ubuntu for a friend, but the installer somehow didn't install GRUB.
[04:12] <jamman> Keanu, no changes?
[04:12] <newtubunt5> if I install, will I get full screen resolution or I HAVE to go edit my BIOS ?
[04:12] <Keanu> Thats what iv got the problem with, its not showing 1024x740
[04:12] <wols> !grub | livecd
[04:12] <ubotu> livecd: grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto
[04:12] <wols> Keanu: paste your currnet xorg.log please
[04:12] <Keanu> Okay
[04:13] <jamman> Keanu, ok well then. Press Ctrl+Alt+F1. then run the command "sudo dpkg-reconfigure xserver-xorg"
[04:13] <livecd> wols: thanks... I tried the one about "lost grub after installing windows" but I didn't see that second one yet I'll give it a try
[04:13] <wols> livecd: what didn't work with the first? what happens?
[04:13] <newtubunt5> Dual-boot Howto says:  In the summary under Migrate Assistant, it should say "Windows Vista/Longhorn (loader)"
[04:14] <Keanu> Ojkay, 2 secconds..
[04:14] <dfgas> any pros on usb audio, i can do the test in gnome, work sfine but it still won't play any of the gnome sounds, if i tell xmms to use the usb audio then it works fine but other than that it won't work without any configuration
[04:14] <Keanu> (Getting the xorg.conf)
[04:14] <dfgas> i set the default card in asound and same thing
[04:14] <newtubunt5> If I don't have this mention on my last screen (before hitting Install) does it mean Ubuntu doesn't see Vista is installed ?
[04:14] <newtubunt5> In the summary under Migrate Assistant, it should say "Windows Vista/Longhorn (loader)"
[04:15] <abhi> hi
[04:15] <abhi> i need help with swat
[04:15] <abhi> on ubuntu 6.10 server editio
[04:15] <WaxyFresh> every time i go to put a desklet on my desktop for rythembox i says i dont have a sensor instaled any ideas?
[04:15] <abhi> i want to access swat remotely
[04:15] <Keanu> http://www.pastebin.com/931959 - my xorg.conf
[04:15] <abhi> i put http://<machine-ip>:901
[04:15] <Paddy_EIRE> abhi, what are you running swat with wine?
[04:15] <abhi> it doesn't work
[04:15] <abhi> no
[04:15] <wols> WaxyFresh: do you have lm_sensors installed and configured?
[04:15] <abhi> i'm running swat on server 6.10
[04:16] <abhi> no wine
[04:16] <bobbob1016> I have two issues, first I can't change file associations, even after I open the "Open With" tab, I can't select any of the other programs listed there.  Second is that I can't do control+click to select multiple files.
[04:16] <Tom47> !enter > abhi Its impossible to follow your q on multiple lines ...
[04:16] <Paddy_EIRE> oops, Swat is a game right abhi
[04:16] <wols> abhi: sudo netstat -anp |grep 901 |less. is swat listening on 127.0.0.1? if yes then that's why
[04:16] <abhi> i want to access swat remotely from another machines browser
[04:16] <newtubunt5> In the summary under Migrate Assistant, it should say "Windows Vista/Longhorn (loader)"
[04:16] <newtubunt5> I don't get this message in my install list
[04:16] <jamman> Keanu, it seems to be fine. so i take it you have already did the "sudo dpkg-reconfigure xserver-xorg"
[04:17] <abhi> then how do i make it listen on eth0?
[04:17] <bayzider> I have done every thing in every guide and howto on google, and yet I can not get my usplash boot up screen to come up. What should I do?
[04:17] <Keanu> @ jamman http://www.pastebin.com/931959 - my xorg.conf
[04:17] <wols> abhi: check swat docs. I dunno what config file to edit
[04:17] <askand> My girlfriend, who is using Windows XP wants me to help her with something by taking control over her computer like we did when I had windows...is this still possible??
[04:17] <Keanu> Yeah
[04:17] <Keanu> I think so
[04:17] <wols> askand: yes. rdesktop
[04:17] <newtubunt5> askand:  check out VNC
[04:17] <WaxyFresh> wols: it just changed is mind now its letting me put it on my desktop but its not recognizing that Rythembox is running,i dont know if i have that installed,how do i install it?
[04:18] <abhi> swat isn't even listening
[04:18] <wols> WaxyFresh: like any other package
[04:18] <dxdemetriou> when I make shutdown on feisty must I umount the disks that I have mounted with gnome's mounter?
[04:18] <wols> dxdemetriou: no
[04:18] <WaxyFresh> wols: Lm or im?
[04:18] <newtubunt5> askand: VNC or www.gotomypc.com
[04:18] <Frogzoo> dxdemetriou: nope
[04:18] <abhi> swat doesn't even show up on netstat
[04:18] <newtubunt5> if that's what you meant
[04:19] <abhi> i don't know what to do
[04:19] <wols> lion martha
[04:19] <bayzider> Any one?
[04:19] <wols> abhi: does it show up in ps aux or top?
[04:19] <Obeah> Does anyone know of a DVI KVM switch that will definitely play nice with a wireless keyboard and modem? (...that isn't $600 or $700?)
[04:19] <jamman> Keanu, yeah like i said, as far as i can tell it looks good.
[04:19] <wols> Obeah: #hardware
[04:19] <Keanu> @ jamman & wols : I can't be assed to try to setup the screen anymore. Thanks for the support. I'll just try to stick it out like this.
[04:19] <Obeah> ...I meant keyboard and mouse\
[04:19] <Keanu> Thanks for the support.
[04:19] <Obeah> ok thx
[04:19] <abhi> no
[04:19] <rahim123> hello all
[04:19] <Obeah> thx wols
[04:20] <abhi> do i need to reboot my machine?
[04:20] <jamman> Keanu, yeah, hope you get it sorted out.
[04:20] <dxdemetriou> wols, Frogzoo, thanks just I asked to be sure, because I saw two of my partitions when I made fsck.ext3 to need recovery the journal
[04:20] <citiskyline_> Hi. does anyone know C here?
[04:20] <Keanu> And sorry Wol's for getting pissy.
[04:20] <rahim123> anyone know why my Gaim on Ubuntu 7.04 doesn't connect and disconnect when my network goes up/down?
[04:20] <Keanu> Thanks Jamman
[04:20] <Keanu> Cya all.
[04:20] <WaxyFresh> wols: E: Couldn't find package lm_sensors
[04:20] <mezziah> bye Keanu
[04:20] <Keanu> Bye Mezziah
[04:20] <jamman> see ya Keanu.
[04:20] <wols> Keanu: change your "generic monitor". "VertRefresh     43-60" that means it cannot do more than 60Hz. at least you said it can't do more. so don't blame ubuntu when it only uses 60Hz and you get a headache
[04:20] <newtubunt5> In the summary under Migrate Assistant, it should say "Windows Vista/Longhorn (loader)"   I do not get this message. Does this mean my Ubuntu installer is unaware of Vista and I will not be able to dual-boot ?
[04:20] <citiskyline_> does anyone here know how to program in C?
[04:20] <wols> !search | WaxyFresh
[04:20] <ubotu> Found: keys-#ubuntu-effects, sources.list-#ubuntu-effects, editors, wink, xubuntu-channels, haha*, fluxbuntu, xubuntu
[04:20] <askand> newtubunt5: is VNC built into windows? How do I use it?
[04:21] <askand> wols: how do I use that?
[04:21] <abhi> wols: no
[04:21] <Shamail> What in c?
[04:21] <wols> WaxyFresh: http://packages.ubuntu.com/cgi-bin/search_packages.pl?keywords=lm-sensors&searchon=names&subword=1&version=feisty&release=all
[04:21] <jamman> askand, you can use the termnal connections.
[04:21] <Shamail> I suspect that i know c...
[04:21] <wols> abhi: did you do it as root?
[04:21] <abhi> yes
[04:21] <citiskyline_> Shamail: well, I made a simple volume calculator program and I keep getting a segmentation fault error.
[04:21] <abhi> wols: yes
[04:21] <jamman> askand, brb, i must go to my gnome to check what the exact name is.
[04:21] <askand>  jamman: terminal connections?
[04:21] <WaxyFresh> wols: thanks
[04:22] <newtubunt5> askand:  Need to install and run Free VNC server on the XP machine, then access it through VNC viewer from your remote machine. I don't know if there is a VNC viewer for Linux though
[04:22] <wols> askand: no it's not built into into windows. use rdesktop as I told you
[04:22] <rahim123> yes there is VNC viewer for Linux
[04:22] <askand>  newtubunt5: I can do this over the internet?
[04:22] <jamman> askand, yeah. in Applications -> Internet -> Remote Connections.
[04:22] <wols> askand: use rdesktop. that is a client for windows remote desktop as you used before
[04:22] <wols> !info rdesktop
[04:22] <ubotu> rdesktop: RDP client for Windows NT/2000 Terminal Server. In component main, is optional. Version 1.5.0-1ubuntu1 (feisty), package size 119 kB, installed size 444 kB
[04:23] <rahim123> anyone know how to make Gaim automatically connect and disconnect based on network status?
[04:23] <jamman> askand, you can use this for vnc or the built in windows one *only on XP tho*
[04:23] <newtubunt5> askand:  No. You'll have to be local at the host at least once, or hand-hold your girl friend for the install
[04:23] <jamman> askand, XP Pro none the less...
[04:23] <askand> newtubunt5:  but when its installed it can be controlled over internet?
[04:24] <wols> askand: yes
[04:24] <abhi> wols: i have inetd installed
[04:24] <nwa|bruno> net groupmap modify ntgroup="Domain Admins" unixgroup="your-unix-group" which ntgroup do i have to add??
[04:24] <abhi> wols: i checked the inetd configuration file also
[04:24] <newtubunt5> askand: Yes
[04:24] <NET||abuse> Does anyone here use democracyplayer at all?? I am trying to get 0.9.6 working under feisty, but no joy..
[04:24] <abhi> wols: the off thing isn't there for swat
[04:24] <wols> abhi: what has inetd to do with swat?
[04:24] <hurrrf> does anyone know a way to improve vnc performance
[04:24] <jamman> askand, most likely. it depends on 1. if she has a firewall 2. if it's set up correctly
[04:24] <sTaTix_1> none of my mp3s play
[04:24] <sTaTix_1> need a codec
[04:25] <sTaTix_1> huh?
[04:25] <hurrrf> im using it over wireless and it is almost too slow to use
[04:25] <wols> !codecs
[04:25] <wols> !codec
[04:25] <ubotu> For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats
[04:25] <chuen> NET||abuse: Yes, I'm using Democracy
[04:25] <newtubunt5> I don't get the message from Ubuntu that indicates it is aware of my Vista partition. In the summary under Migrate Assistant, it should say "Windows Vista/Longhorn (loader)". I don't get it. Am I missing something or am I about to erase my Vista partition ?
[04:25] <jamman> !codec | sTaTix_1
[04:25] <ubotu> sTaTix_1: please see above
[04:25] <sTaTix_1> k, thanks
[04:25] <chuen> NET||abuse: and Feisty.
[04:25] <NET||abuse> chuen, what version of democracy?
[04:26] <Shamail> Citiskyline, r u gettin me?
[04:26] <NET||abuse> using the one from getdemocracy.com? ftp.osuosl.org
[04:26] <Ind[y] > I tried to manually set the internet options, but turned back to roaming mode, but now it doesn't find any networks available (there ARE networks available. another pc is online).
[04:26] <Ind[y] > Please, help.
[04:26] <chuen> NET||abuse: Just checking ... :)
[04:26] <NET||abuse> chuen, so version 0.9.2 is from feisty repository, and 0.9.6 is from ftp.osuosl.org
[04:26] <newtubunt5> Paddy_EIRE welcome back  :-)
[04:27] <bobbob1016> Can anyone help me with my file associations?  I can't change file associations, even after I open the "Open With" tab, I can't select any of the programs listed there.
[04:27] <newuser> hi, help me.. i cannot install broadcom wifi
[04:27] <newuser> what should i do
[04:27] <Paddy_EIRE> newtubunt5, :)
[04:27] <jamman> Hey, anybody know when Amarok 2 is coming out?
[04:27] <Ind[y] > I first had roaming mode. It found networks. I changed to Manual settings. It didn't work. So, I changed back to roaming mode, but now it doesn't find any networks. Please, help me.
[04:27] <chuen> NET|abuse: 0.9.2.1
[04:27] <Ind[y] > Now I am with ethernet.
[04:27] <Ind[y] > wired
[04:27] <jamman> newuser, try ndiswrapper.sourceforge.net
[04:27] <mezziah> jamman: isn't there a roadmap for that? my guess would be that it comes out with kde4
[04:27] <chuen> NET|abuse: from repo
[04:27] <hendrixski> wols, I was just on here as "liveCD"  the ACPI on that machine I'm installing on isn't very friendly to the LiveCD... I'm on my laptop now
[04:27] <rahim123> newuser: install bcm43xx-fwcutter and then reboot
[04:27] <NET||abuse> chuen, ahh, ok,, not to worry so.
[04:27] <newuser> jamman, how??
[04:27] <jamman> mezziah, hmm... havent checked for a little while.
[04:27] <Paddy_EIRE> newuser, did you not follow the guide I gave you
[04:27] <wols> hendrixski: acpi=off, noacpi, etc
[04:28] <mezziah> would be a good idea then, i'll check it out too
[04:28] <newuser> rahim123, already.... but still not working
[04:28] <chuen> NET||abuse: Right so. :)
[04:28] <RabidGoblin> anyone here using the ATI drivers?
[04:28] <dfgas> any pros on usb audio, i can do the test in gnome, work sfine but it still won't play any of the gnome sounds, if i tell xmms to use the usb audio then it works fine but other than that it won't work without any configuration.  i set the default card in asound and same thing
[04:28] <ziroday> RabidGoblin: just ask
[04:28] <newuser> Paddy_EIRE, i already did .. but the file is no longer in tat web..
[04:28] <wols> !anyone | RabidGoblin
[04:28] <ubotu> RabidGoblin: A large amount of the first questions asked in this channel start with "Does anyone/anybody..."  Why not ask your next question (the real one) and find out?
[04:28] <mezziah> seems that i'm right with kde4 according to the kde-website
[04:28] <rahim123> and also google for a utility called wicd, NetworkManager is junk un 7.04
[04:28] <hendrixski> I tried the noacpi option, but it still goes down :-/  I hear the fan on the whole time too
[04:28] <Frederik> test,anybody can hear me?
[04:28] <hendrixski> wols, I tried the noacpi option, but it still goes down :-/  I hear the fan on the whole time too
[04:28] <Dimensions> Hiya if i am to send some files to a client pc on network and can have access to the server with rsa keys can i scp a file directly to client pc lets say 192.168.0.2 ?
[04:29] <Ind[y] > I first had roaming mode. It found networks. I changed to Manual settings. It didn't work. So, I changed back to roaming mode, but now it doesn't find any networks. Please, help me.
[04:29] <Paddy_EIRE> newuser, If you are running Ubuntu 7.04 --> https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx/Feisty
[04:29] <wols> hendrixski: when does it "go down".all you told me it doesn't install grub
[04:29] <RabidGoblin> ziroday, well i was just wondering if someone could show me their xorg.conf, because mine is messed up due to the on board video card that im not using
[04:29] <jamman> mezziah, cool. and kde4 will be when?
[04:29] <hendrixski> wols, well it stays up long enough for a complete install... just somehow it didn't install grub
[04:29] <wols> RabidGoblin: sud dpkg-reconfigure xserver-xorg
[04:29] <rambo3> Ind[y] , iwlist wlan0 scan
[04:30] <mezziah> jamman: don't know exactly.. but it will be this year
[04:30] <hendrixski> wols, when I look at the filesystem that it installed, in the /boot folder there is no grub folder
[04:30] <wols> sudo dpkg-reconfigure xserver-xorg
[04:30] <mezziah> i'll take a look
[04:31] <Ind[y] > rambo3: $ iwlist wlan0 scan
[04:31] <RabidGoblin> wols, alright thanks
[04:31] <Ind[y] > wlan0     Interface doesn't support scanning.
[04:31] <jamman> mezziah, cool. should be good. i really like kde, mostly because of amarok tho.
[04:31] <Frederik> Hey,anybody know how to make logitech usb headset function in ubuntu?
[04:31] <mezziah> no, october
[04:31] <wols> hendrixski: boot from a livecd and install grub again
[04:31] <mezziah> jamman: yes, me too and it's a shame that it doesn't work on windows using cygwin :(
[04:31] <rambo3> Ind[y] , maby it is diferent device
[04:31] <sTaTix_1> wow, I have no idea what any of tha tmeans..... which mp3 codec would you recommend downloading
[04:31] <hendrixski> wols, I can install just grub from the liveCD?  because I tried the regular install twice, and each time, no grub
[04:31] <wols> sTaTix_1: we cannot tell, depends on player
[04:31] <sTaTix_1> banshee
[04:31] <wols> !grub | hendrixski
[04:31] <ubotu> hendrixski: grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto
[04:31] <hendrixski> oh right
[04:31] <Shamail> I would rather recomm mplayer
[04:31] <newtubunt5> I have /dev/sda1, /dev/sda2 and /dev/sda3 and Free Space
[04:31] <sTaTix_1> i am building a jukebox
[04:31] <newtubunt5> when I double-click Free Space, I get prompted to 'format it'
[04:31] <jamman> mezziah, amen. my parents hate it. too "slow." but what they didn't understand is that they were vnc ing to it and thats why it was jumpy.
[04:31] <sTaTix_1> has to be easy to use for everyone and show album art
[04:31] <hendrixski> wols,  lol, I lost that link last time when the liveCD crashed (obviously)  thanks again, i'll give that a go
[04:31] <newtubunt5> how should I do my setup ?
[04:32] <juan278> if i have an onboard card and an agp, what are the problems with using both, would i be able to move windows between them?
[04:32] <Shamail> Then go 4 some other player rhythmbox or so
[04:32] <sTaTix_1> do I need codecs for it too?
[04:32] <Ind[y] > rambo3: First, I had Roaming Mode, and it found wireless networks. I changed to Manual Settings, but it didn't work, so I decided to change back to Roaming Mode. Now it doesn't find any wireless networks. I think this is insane.
[04:32] <wols> newtubunt5: do you have a partition in that "free space"?
[04:32] <Shamail> Yes gstreamer plugin madplay
[04:36] <mezziah> jamman: it's also a bit slowish on windows although my pc is quite fast.. let's see how it runs when amarok will run on windows natively
[04:36] <sTaTix_1> k
[04:36] <jamman> mezziah, yeah, can't wait.
[04:36] <wols> juan278: there are ways to set that up. xinerama for example
[04:36] <rambo3> not insane , crazy  , crazy like a fox
[04:36] <ziroday> Ind[y] : in terminal sudo /etc/init.d/dbus restart
[04:36] <jamman> mezziah, oh well tho. i don't use windows much anyways.
[04:36] <newtubunt5> NEED Help with Ubuntu Create partition
[04:36] <bobbob1016> Can anyone help me with my file associations?  I can't change file associations, even after I open the "Open With" tab, I can't select any of the programs listed there.
[04:36] <mezziah> jamman: i mainly use windows for games.. amarok runs really fast on linux though
[04:36] <oo> hey all, hopefully someone can shed some light... i'm trying to connect with network manager to a WPA wireless network, but it keeps failing. the logs show "Successfully claimed IP address 169.254.5.217"... but then:
[04:36] <oo> "could not get IP configuration info for 'scialoia4piano', asking for new key"
[04:36] <oo> and keeps looping... now where is it getting the 169... address from? this should be fresh install of feisty, without any IP config and shouldn't it get a dhcp address (ie 192.168....)? any ideas?
[04:36] <juan278> Will 2 cards (1 onboard) generally work better or worse than a dual head system?
[04:36] <mezziah> jamman: but why are you requesting amarok2? is amarok1.x not good enough? :>
[04:36] <rorshack> should Ubuntu, not be installed on a primary drive with ntfs?  I installed it and try to reformat a ubuntu partition and swap drive.. it corrupted the entire File allocation table.. took a couple of days to recover my data :(
[04:36] <rambo3> sTaTix_1, use freevo or mythtv
[04:36] <jamman> mezziah, yes. and i just realized that kopete has a plugin for staus.
[04:36] <mezziah> jamman: for.. what?
[04:36] <jamman> mezziah, and no. just wondering. it will be AWESOME!!!
[04:36] <Paddy_EIRE> newuser, anyjoy
[04:36] <rorshack> I thought ubuntu was meant to be easy to install :/
[04:36] <mezziah> jamman: yea i hope so.. just like kde4 will be :>
[04:36] <newtubunt5> Paddy_EIRE:  have time for a private ?
[04:36] <Paddy_EIRE> yeah
[04:36] <newtubunt5>  I will PM you Paddy_EIRE
[04:36] <uakkeri> hi!
[04:36] <Paddy_EIRE> newtubunt5, /join #Paddy_EIRE
[04:36] <oo> is it possible to get the WPA option in the network manager manual configuration?
[04:36] <jamman> mezziah, i know. i can do opaque thins with it where gnome cannot.
[04:36] <juan278> rorshack: if it was on a seperate partition to the ntfs i dont understand how thats possible, unless you resized the ntfs
[04:36] <jamman> mezziah, and it seems to run faster. (i only have a 500mHz processor)
[04:36] <mezziah> jamman: you already got kde4 alpha?
[04:36] <jamman> mezziah, no. just kde3, i wonder if it's available. i might have to look...
[04:37] <uakkeri> I can't do following: sudo echo 'level 6' > /proc/acpi/ibm/fan   I get Permission denied????
[04:37] <mezziah> jamman: yea it's available but it seems that isn't safe to use for daily work.. looks like kde3 with some new icons
[04:37] <hatredx> how to I prevent dhcp client at boot from rewriting resolv.conf?
[04:37] <RabidGoblin> alright so the ati driver is installed, but fglrxinfo gives me "Xlib:  extension "XFree86-DRI" missing on display ":0.0".", what should i do about that?
[04:37] <fooey> is there an equivalent of adobe acrobat professional for linux?
[04:37] <jamman> mezziah, lol.
[04:38] <ziroday> fooey: theres adobe acrobat professional for linux i think :)
[04:38] <mezziah> jamman: i used kde3 before.. really nice, until i tried out e17 :D
[04:38] <In[d] y> No, again nothing. It can't find any wireless networks. This is madness.
[04:38] <In[d] y> Hey, who helped me before?
[04:38] <fooey> ziroday, really? I thought they only made the reader available for linux
[04:38] <rambo3> uakkeri,  try : echo echo 'level 6' | sudo tee -a  /proc/acpi/ibm/fan
[04:38] <rambo3> - echo
[04:38] <jamman> mezziah, e17? wheres that available at?
[04:39] <jamman> mezziah, and does amarok run fast on it?
[04:39] <newtubunt5> who can help a newbie with install, partition and boot loading questions ?
[04:39] <mezziah> jamman: take a look at http://www.get-e.org - it's still under heavy development but seems stable and fast as hell
[04:39] <Shamail> Possibly everyone in the room
[04:39] <In[d] y> This also happened with the live cd, but when I restarted it was OK. But it was Live CD and the system was set up over from the beginning. Now it just CAN'T find any network. ??!
[04:39] <juan278> fooey: what does adobe acrobat pro do?
[04:39] <ziroday> fooey: oh maybe they did lol
[04:39] <mezziah> jamman: well it takes some time to load the kde libraries and stuff because e17 doesn't need them but once loaded, it's as fast as on kde
[04:39] <In[d] y> What's going on?!
[04:39] <ziroday> fooey: you can try scribus or OOO writer it exports to pdf
[04:39] <jamman> mezziah, excellent.
[04:39] <fooey> juan278, fancy editing of pdf's
[04:40] <jamman> mezziah, how about looks?
[04:40] <newtubunt5> I need a short private chat with someone knowlegeable in install procedures please
[04:40] <blue|palm> !aptfix
[04:40] <ubotu> If Adept crashed on you and your database is locked, try this in konsole:  sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a 
[04:40] <ziroday> fooey: i think i can done also withcrossover office
[04:40] <mezziah> jamman: if you wait a sec i can take a screenshot
[04:40] <hurrrf> whats the fastest way to enable ssh for "locally" remote access?
[04:40] <In[d] y> It found, but after I changed to Manual Settings, and back to Roaming Mode, it can't find!!
[04:40] <magnetron> !install | newtubunt5
[04:40] <ubotu> newtubunt5: Ubuntu can be installed in lots of ways. Please see https://help.ubuntu.com/community/Installation for documentation. Problems during install? See https://wiki.ubuntu.com/CommonProblemsInstall and https://wiki.ubuntu.com/DapperReleaseNotes/UbiquityKnownIssues - See also !automate
[04:40] <In[d] y> Is this logical?
[04:40] <jamman> newtubunt5, go  ahead.
[04:40] <rorshack> juan: I tried installing twice, 1 with primary ntfs+fat32  , and then fat32+fat32 - both of them I used the installer's partitioner to resize and create swap drives.. both times it screwed my system.  Although I'm a power-user/programer, I'm too scared to install ubuntu anymore.  I've waited 7yrs for a friendly unix to install, now I'm not sure if I can even get past first step.
[04:40] <blue|palm> !aptfix
[04:40] <uakkeri> RAMBO: THNX
[04:40] <rogerio> Ola
[04:40] <Shamail> I could have but i am online with my cell phone, so cant send private
[04:40] <In[d] y> The guy who helped me before. Is he here?
[04:41] <Azul> what is newtubunt5?
[04:41] <rorshack> I'll take a look at that install probs page :/
[04:41] <jamman> mezziah, oh and kde4 is supposed to be released on October 23, 2007
[04:41] <newtubunt5> ubotu, may I private you ?
[04:41] <In[d] y> The guy who said me to run: "sudo /etc/init.d/dbus restart" is he here?
[04:41] <Azul> newtubunt5: he is a cyborg
[04:41] <uakkeri> rambo3: i did  sudo echo 'level 7' | sudo tee -a  /proc/acpi/ibm/fan and now the fan is at maximum
[04:41] <juan278> fooey: perhaps you could use OO or try scribus do a pdf search in repos but im not sure if itll give everything you want, you can print to pdf from most programs tho
[04:41] <mezziah> jamman: yep
[04:41] <fooey> ziroday,scribus looks interesting, I'll check it out, thanks
[04:41] <mezziah> jamman: http://img363.imageshack.us/img363/8585/blahblahhl1.jpg
[04:42] <In[d] y> The guy who said me to run: "SUDO /ETC/INIT.D/DBUS RESTART" is he here?
[04:42] <ziroday> fooey: np
[04:42] <mezziah> jamman: it's my current desktop with e17
[04:42] <ziroday> In[d] y: ready to be shouted at
[04:42] <south01> !codecs
[04:42] <ubotu> For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats
[04:42] <rorshack> if it's our first ubuntu install, should we stay away from the server edition?
[04:42] <In[d] y> ziroday: :)
[04:42] <Azul> mezziah: nice desktop what's the window manager on that one?
[04:42] <In[d] y> ziroday: It didn't work.
[04:42] <uakkeri> rambo3: although i don't now what u made me to do.... thanx very very many
[04:42] <_Ahti_> roroshack: Are you trying to install a server?
[04:42] <mezziah> Azul: e17 with a custom theme
[04:42] <fooey> juan278, I wanted the fancy features like highlighting, notes, comments, etc..
[04:43] <ziroday> In[d] y: is it usb?
[04:43] <fooey> juan278, the collaborative editing stuff
[04:43] <_Ahti_> roroshack: If not, then of course you'll use the standard
[04:43] <Azul> e17?? never heard of it
[04:43] <rorshack> ahti: I only want to install ubuntu, to run apache / tomcat / mysql
[04:43] <jamman> hmm... i like.
[04:43] <mezziah> Azul: http://www.get-e.org
[04:43] <jamman> mezziah, hmm... i like.
[04:43] <Shamail> Right now someone was talkin about kde4, is there 3d in it?
[04:43] <_Ahti_> rorshack: Just install those after installing Ubuntu
[04:43] <rorshack> thought this was an easy to route to get a solid platform
[04:43] <rambo3> uakkeri, np suomi
[04:43] <_Ahti_> rorshack: Just for those things you won't need to install a full-on server edition
[04:43] <rorshack> I'm fairly new to unix, so I don't know if those are even easy to install afterwards
[04:44] <_Ahti_> rorshack: Are you trying to install a full-time server?
[04:44] <rorshack> ahti: no, just for testing and development
[04:44] <In[d] y> ziroday: no
[04:44] <In[d] y> ziroday: I had it to Roaming Mode, and it found Wireless Networks and it connected to mine. Nice. I changed it to Manual Settings, but they didn't work. So, what's logical? To turn it back to Roaming Mode. I did so. What do we all expect? To find Wireless Networks and connect to mine. But what happened instead? It didn't find any Wireless Network. I would be really glad if someone could explain this.
[04:44] <_Ahti_> rorshack: Ok, just install the required applications on the standard installation
[04:44] <rorshack> but shouldn't the install process be the same?
[04:44] <_Ahti_> rorshack: :)
[04:45] <newtubunt5> I read the installation documents but they're all generic or assuming we know how to setup partitions. I have Vista installed and freed half of my disk space for Ubuntu. I want to install U in the free space. I know I have to allocate space for swap and for / ...  but I don't know how to do it. When I choose the auto selection, it seems like Ubuntu is unaware of my Vista.
[04:45] <_Ahti_> rorshack: To a certain extent
[04:45] <rorshack> why should it corrupt my FAT table
[04:45] <ziroday>  In[d] y: me 2 :0
[04:45] <ziroday> In[d] y: bad drivers
[04:45] <ziroday> In[d] y: do a bunch of restarts and the /etc/init.d/...
[04:45] <ziroday> In[d] y: and hopefully it will come back
[04:45] <_Ahti_> rorshack: I'm sorry this is starting to go beyond my knowledge, i don't play around with windows or windows related stuff, so...
[04:46] <Shamail> Is there 3d in kde 4
[04:46] <rorshack> I'm lucky I've built up a huge collection of partition tools, or else my system would still be 'bye bye'
[04:46] <Paddy_EIRE> newuser, you there
[04:46] <mezziah> Shamail: at present you have to use external programs for 3d
[04:46] <Paddy_EIRE> How does that whois command work
[04:46] <newtubunt5> paddy_EIRE: do you get my private messages ?
[04:46] <In[d] y> ziroday: It also happened with the Live CD. Roaming Mode: OK. Switch to Manual Settings: No OK. Back to Roaming Mode: Did not find Wireless Networks. Restart. Roaming Mode: OK.
[04:46] <_Ahti_> rorshack: For partitioning and resizing you may want to find someone else, i'm off... :)
[04:46] <Shamail> Fine, like?
[04:46] <Paddy_EIRE> newtubunt5, now  I see you
[04:46] <In[d] y> But it was Live CD, and the system was set up all over from the start.
[04:47] <mezziah> beryl does the job very well
[04:47] <Tom47> rorshack i just happened to have been looking at this .... http://fosswire.com/2007/05/29/installing-and-configuring-lamp-on-ubuntu-part-1/
[04:47] <ziroday> In[d] y: its bad drivers i dunno how to specifically fix it but restarts and unplugging and random screaming at the wall and /etc/init.d/... helps
[04:47] <Shamail> That works for gnome i suppose... Will it do the same for kde as well?
[04:47] <In[d] y> ziroday: done all this, but nothing happened.
[04:48] <mezziah> i've experienced a huge slowdown on kde compared to gnome but basically it works, yes
[04:48] <wols> ziroday: wireless drivers are laoded? what is in /etc/network/interfaces?
[04:48] <daquino> how do i install xfce and gnome onto kubuntu ?
[04:48] <Shamail> Nice! Let me get my hands dirty as well. Thanks pal
[04:48] <rorshack> tom: cheers that looks useful
[04:48] <mezziah> have fun
[04:49] <aborilov> sudo aptitude install xfce
[04:49] <aborilov> daquino, sudo aptitude install xfce
[04:49] <mezziah> daquino: 'sudo apt-get install xfce' and 'sudo apt-get install gnome-desktop'
[04:49] <jamman> mezziah, are you using aquamarine instead of emerald?
[04:49] <rorshack> I'll need to ghost my current windows partition before I try it, and install ubuntu again
[04:49] <mezziah> jamman: nop
[04:49] <In[d] y> wols: http://pastebin.ca/576496
[04:49] <rorshack> if it screws up again I'll have to go with fedora :(
[04:50] <jamman> mezziah, yeah, try that. it should speed beryl up in kde.
[04:50] <mezziah> jamman: emerald doesn't work here and i never tested aquamarine
[04:50] <mezziah> jamman: dunno.. but thanks for pointing that out
[04:50] <In[d] y> And the bad thing, is that I tried to persuaded many people that Ubuntu and Linux in general is much more stable than MS win32.
[04:50] <In[d] y> I thought I made it. But... shit!
[04:50] <gamejunkiejim> Hello
[04:50] <jamman> mezziah, no problem. ive just read through the how to LOTS of times.
[04:50] <won_sun> da
[04:50] <gamejunkiejim> How is everyone?
[04:51] <In[d] y> wols: http://pastebin.ca/576496
[04:51] <gamejunkiejim> Is this a place I can ask for help?
[04:51] <AaronMT> Yes
[04:51] <mezziah> yes gamejunkiejim, just ask your question.
[04:52] <Shamail> Certainly u can! Feel free
[04:52] <bobbob1016> Can anyone help me with my file associations?  I can't change file associations, even after I open the "Open With" tab, I can't select any of the programs listed there.
[04:52] <In[d] y> Ubuntu 7.04. I had it to Roaming Mode, and it found Wireless Networks and it connected to mine. Nice. I changed it to Manual Settings, but they didn't work. So, what's logical? To turn it back to Roaming Mode. I did so. What do we all expect? To find Wireless Networks and connect to mine. But what happened instead? It didn't find any Wireless Network. I would be really glad if someone could explain this.
[04:52] <gamejunkiejim> OK, well I'm trying to run gksudo or su in a terminal on KDE in kubuntu
[04:52] <gamejunkiejim> and it tells me the password is invalid
[04:52] <Azul> bobbob1016: you can't select?
[04:52] <gamejunkiejim> But it's the only user on here
[04:53] <Shamail> Have u added your name in /etc/sudoers list
[04:53] <gamejunkiejim> I just installed it a few moments ago over my GNOME install
[04:53] <Azul> if the password is invalid, you might be spelling it wrong
[04:53] <gamejunkiejim> I tried but it won't let me
[04:53] <gamejunkiejim> It works for sudo
[04:53] <gamejunkiejim> to grab new package updates for instance
[04:54] <pha|con> ind[: don't change it to manual?
[04:54] <gamejunkiejim> ?
[04:54] <Shamail> Look before you can use sudo, u needa add your name in /etc/sudoers list
[04:54] <gamejunkiejim> I would have no idea
[04:54] <gamejunkiejim> One sec
[04:54] <Shamail> Open this file
[04:54] <fooey> btw, what should I do with a .bin file?
[04:55] <mezziah> fooey: 'sh <file>.bin'
[04:55] <AaronMT> gamejunkiejim: you might want to have it as root	ALL=(ALL) ALL
[04:55] <Shamail> And in the end there is a sample entry saying something like %wheel...
[04:55] <fooey> mezziah, thanks
[04:55] <AaronMT> %admin ALL=(ALL) ALL
[04:55] <daquino> mezziah:  E: Couldn't find package gnome-desktop
[04:55] <Shamail> The one u like
[04:55] <WaxyFresh> how do i install a GDM theme?
[04:55] <Shamail> Add your name is similar fashion
[04:56] <daquino> mezziah:  E: Couldn't find package xfce
[04:56] <gamejunkiejim> I don't have permission to edit the list
[04:56] <Shamail> Edit it as root
[04:56] <mezziah> daquino: sorry.. xfce4
[04:56] <mezziah> daquino: and what about 'gnome'?
[04:56] <Shamail> Before that change the permissions to a+w+x
[04:56] <wols> daquino: ubuntu-desktop is what you want
[04:56] <gamejunkiejim> That's what I mean
[04:57] <gamejunkiejim> It won't give me access to root to alter the file
[04:57] <Shamail> And after editing back to 0440
[04:57] <mezziah> wols: yes, thanks for correcting me
[04:57] <tyler_d> kde or gnome?
[04:57] <wols> gamejunkiejim: use a live cd
[04:57] <mezziah> but it seems that gnome also works
[04:57] <Azul> install xubuntu-desktop?
[04:57] <wols> mezziah: it's not the ubuntu specific gnome afaik
[04:57] <Shamail> chmod a+x+w /etc/sudoers
[04:57] <gamejunkiejim> I can change the file from the Live CD?
[04:57] <Azul> what is the command to clear the apt cache?
[04:57] <Shamail> As root
[04:58] <AaronMT> I dont think gmaejunkiejim has any root permissions
[04:58] <rockets> Hey is anybody having trouble doing an apt-get update with the US repositories
[04:58] <WaxyFresh> is there even a way to install GDM themes?i can find it on the forum,so im kinda confused.
[04:58] <wols> Shamail: he can't do that unless he has root priviledges int he firt place. and amd it it word writable is BAD idea. don't giev advice like this
[04:58] <gamejunkiejim> No I don't
[04:58] <WaxyFresh> cant^
[04:58] <gamejunkiejim> It's a fresh install too
[04:58] <wols> gamejunkiejim: I told you: use a live cd
[04:58] <Frogzoo> !themes | WaxyFresh
[04:58] <ubotu> WaxyFresh: Find your themes at: http://www.gnome-look.org - http://art.gnome.org - http://www.kde-look.org - http://themes.freshmeat.net/browse/58/ - http://www.guistyles.com - https://wiki.ubuntu.com/Artwork/ - Also see !changethemes and https://help.ubuntu.com/community/UbuntuEyeCandy
[04:58] <wols> Azul: apt-cache --help. self explanatory
[04:58] <Shamail> No its not required
[04:59] <gamejunkiejim> I will try that, but I want it to be a last resort if possible, I just want to make sure I'm not doing something wrong somewheres
[04:59] <Shamail> U need to change the file per
[04:59] <WaxyFresh> whats he shorcut to switch in between desktops?
[04:59] <tck> anyone use Ubuntu MCE ?
[04:59] <WaxyFresh> !changethemes
[04:59] <ubotu> To change your themes, see https://help.ubuntu.com/community/UbuntuEyeCandy.  Kubuntu users should visit https://help.ubuntu.com/community/CustomizeKubuntu.
[04:59] <Azul> wols: i want to remove the downloaded files
[04:59] <AaronMT> ctrl-alt left and right arrow
[05:00] <Shamail> There is nothing wrong
[05:00] <wols> Azul: I know
[05:00] <hendrixski> wols, I tried the grub-install command from the site you listed... it didn't work :-(
[05:00] <Shamail> First tell me u r which lever user
[05:00] <tck> http://video.google.com/videoplay?docid=-4422887272477313460&hl=en = Ubuntu MCE looks animal
[05:00] <daquino> i clicked on xfce4 but i had to click on 20 other packages cause it doesn't select everything by defualt
[05:00] <tck> anyone use this?
[05:00] <wols> Azul: mea culpa. it's apt-get --help
[05:00] <gamejunkiejim> whoa
[05:00] <wols> hendrixski: you need to install grub too with apt-get first
[05:00] <gamejunkiejim> It tried to work that time, but it said I had a bad device
[05:00] <hendrixski> wols, part of the problem is that there is no /boot/grub
[05:00] <Shamail> Means?
[05:01] <dvs01> how do i make the application selector panel at the bottom of the screen in gnome have 2 rows?
[05:01] <rockets> Anybody else having issues with the US repos
[05:01] <cuteharez> Hi can anyone help me on remove avg7.5 - Debian distributions
[05:01] <gamejunkiejim> X Error: BadDevice, invalid or uninitialized input device 169
[05:02] <cuteharez> Hi can anyone help me on removing* avg7.5 - Debian distributions
[05:02] <AaronMT> dvs01: I dont think you can, have you right clicked and checked the properties?\
[05:03] <cuteharez> I install it but it can't do any updates at all
[05:03] <hendrixski> wols, hhmmm,  looks like grub is already on the liveCD...
[05:03] <gamejunkiejim> Kate and KWrite won't initialize either
[05:03] <cuteharez> so its useless then
[05:03] <gamejunkiejim> Damnation this thing.
[05:03] <Shamail> I have no clue what u have done! Is it a fresh install?
[05:03] <gamejunkiejim> I'm gonna go back to Gnome.
[05:03] <Moduliz0r> hi
[05:03] <gamejunkiejim> Yes
[05:03] <gamejunkiejim> !
[05:04] <gamejunkiejim> I just finished the install maybe 3 hours ago!
[05:04] <Moduliz0r> is Ubuntu's "Copy CD" function alright for Audio CDs?
[05:04] <gamejunkiejim> I installed firefox 2
[05:04] <Shamail> And would u tell me in brief what u did last
[05:04] <gamejunkiejim> And I installed Java
[05:04] <Moduliz0r> is Ubuntu's "Copy CD" function alright for Audio CDs?
[05:04] <Shamail> But there apps can not cause x to stop func
[05:04] <gamejunkiejim> Last was using the package manager
[05:06] <gamejunkiejim> Adept
[05:06] <wols> hendrixski: the part about "Preparing Your Working Environment" applies to you
[05:06] <Shamail> Have you removed any package named x*
[05:06] <Moduliz0r> hello?
[05:06] <gamejunkiejim> To grab a couple games and
[05:06] <gamejunkiejim> No
[05:06] <gamejunkiejim> Didn't remove anything
[05:06] <AzmodanZ> hello there
[05:06] <wols> hendrixski: you need a chroot and then install grub via apt-get there
[05:06] <AaronMT> gamejunkiejim what type of user are you?
[05:06] <gamejunkiejim> Newb
[05:06] <Moduliz0r> hi is the "Copy Disc" function on Ubuntu alright with copying audio cds?
[05:06] <dvs01> AaronMT: yeah, not seeing anything that relates to it
[05:06] <AzmodanZ> someone use dansguardian there? can help me handle some stuff ?
[05:06] <packeterr0r> Lawlz
[05:06] <AaronMT> gjj: when you type in a shell, su, and you get a password prompt, you dont know your password?
[05:06] <Shamail> Gamejunkie can u edit u xconf file?
[05:06] <gamejunkiejim> I have a few PC's, but I've run Windows on them and dual boot two of them into ubuntu
[05:06] <WaxyFresh> is fiesty debian etch or sarge?im trying to follow this how to and im confused as to which repos to add to my sources
[05:06] <dvs01> i use 3-4 rows in windows and have a lot of stuff open, so it feels pretty awkward only having 1 in gnome
[05:06] <WaxyFresh> http://ubuntuforums.org/showthread.php?t=216597&highlight=howto+gdm+themes
[05:06] <packeterr0r> Hobbsee
[05:07] <rorshack> oh dear , just stumbled on a forum thread, saying Ubuntu doesn't like SATA on Amd 64 :(  http://ubuntuforums.org/showthread.php?t=477520
[05:07] <Moduliz0r> can anyone help me?
[05:07] <gamejunkiejim> that's a negative
[05:07] <AaronMT> dvs01: you can always use the multiple windows instead, ctrl-alt-left and right arrow key
[05:07] <Dimensions> hiya what is default root password for ubuntu machine if we dont specify one ? i can't access one of my machine with default user and i donno passwd for its user ... i didn't specify one for root while installing ubuntu
[05:07] <gamejunkiejim> Anything that requires Kate or KWrite
[05:07] <Pici> !root | Dimensions
[05:07] <ubotu> Dimensions: do not try to guess the root password, that is impossible. Instead, realise the truth.. there is no root password. Then you will see that it is sudo that grants you access and not the root password. Look at https://help.ubuntu.com/community/RootSudo
[05:07] <AzmodanZ> can anyone help me ?
[05:07] <rorshack> not sure if it's feasible to change machine just to run ubuntu.. <sigh>
[05:07] <hendrixski> wols, install grub into a chroot on the liveCD???
[05:07] <Shamail> Hey aronMT gamejunkies x is not workin fine...
[05:07] <Moduliz0r> i just need to know if the Copy Disc function in Ubuntu works with music CDs?
[05:07] <orbin> Moduliz0r: where's that option?
[05:07] <WaxyFresh> Dimensions: did you happen to install in OEM mode?
[05:08] <Moduliz0r> on the desktop
[05:08] <Moduliz0r> right click the CD
[05:08] <Moduliz0r> and click Copy Disc
[05:08] <wols> hendrixski: no. read the paragraph I told you. chroot into your hdd install
[05:08] <orbin> Moduliz0r: well why not try it.  repeating yourself 5 times doesn't seem to be working.
[05:08] <Moduliz0r> I did
[05:08] <Moduliz0r> but my PC has failed before
[05:08] <Moduliz0r> in Windows
[05:08] <Moduliz0r> and it failed in Linux
[05:08] <AzmodanZ> can anyone help me ?
[05:08] <Moduliz0r> but, I have 2 identical drives, and its caused problems before
[05:09] <AaronMT> So its your hardware then] 
[05:09] <Moduliz0r> Well ill try it on the... slow machine
[05:09] <Moduliz0r> but it has 2 different ones
[05:09] <wols> Moduliz0r: why can't you use a CD burning program?
[05:09] <hendrixski> wols, oh.. right right... I'm looking at like 5 different manuals and forum posts at once... very confused here...
[05:09] <wols> there you can duplicate CDs easily
[05:09] <f_akmal> hi all, I need help with running ubuntu from my USB
[05:09] <Hobbsee> packeterr0r: yes?
[05:10] <AaronMT> get k3b cd application
[05:10] <wols> a/lastlog packeterr0r
[05:10] <WaxyFresh> um im following this howto:http://ubuntuforums.org/showthread.php?t=216597&highlight=howto+gdm+themes  and it says to add a line to my sources.list but it asks if imrunning debian etch or sarge,i know ubuntu's based on debian but which one would feisty be?
[05:10] <Shamail> pendrivelinux.com if i remember correctly
[05:10] <RivaeAerya> Hey there. I'm looking for a good, free, online notebook. Anyone know one?
[05:11] <Shamail> Notebook means like google docs
[05:11] <AzmodanZ> please can anyone help me with my dansguardian ?
[05:11] <AaronMT> Storing personal information online?
[05:11] <orbin> WaxyFresh: neither.
[05:11] <fury> hi, there. can anybody help me change my WM from gnome to fluxbox and uninstall gnome
[05:11] <RivaeAerya> AaronMT: yeah
[05:11] <gamejunkiejim> OK, the sudoers file should say # Members of the admin group may gain root privileges
[05:11] <gamejunkiejim> %admin ALL=(ALL) ALL
[05:12] <gamejunkiejim> right?
[05:12] <Shamail> Google docs will suit best, apart from that zoho is a good sol
[05:12] <RivaeAerya> Shamail: Notebook means a quick jotting space where i can store notes and keep them for later
[05:12] <RivaeAerya> Shamail: Tried zoho, that's nice.. but aren't office suits for schoolwork instead of taking notes?
[05:12] <Dimensions> WaxyFresh:  Live Cd ...
[05:12] <WaxyFresh> orbin: then whats ubuntu forums talking about?
[05:12] <zeth> Hi, is it possible to install a package or two from unstable/gutsy onto feisty? If so how? Cheers.
[05:13] <packeterr0r> Hobbsee, how do you like bigpond? I've been hearing mixed feelings about it
[05:13] <Hobbsee> packeterr0r: it's....well, it's OK when it works.
[05:13] <Hobbsee> packeterr0r: i frequently end up rebooting the router and such.
[05:13] <Shamail> If u want a thing in which u can quickly note down things then there is a firefox plugin for google notebook
[05:13] <AzmodanZ> can anyone help me ?
[05:13] <bobbob1016> Can anyone help me with my file associations?  I can't change file associations, even after I open the "Open With" tab, I can't select any of the programs listed there.
[05:14] <WaxyFresh> Dimensions: i dont think there is a password on the live cd,just type sudo folloed by whatever comand
[05:14] <Shamail> Just sel right click and note this
[05:14] <Pici> !splashy | WaxyFresh try this link instead
[05:14] <ubotu> WaxyFresh try this link instead: To select the usplash artwork you want, use "sudo update-alternatives --config usplash-artwork.so && sudo update-initramfs -u" - See https://help.ubuntu.com/community/USplashCustomizationHowto for adding your custom artwork
[05:14] <Shamail> The text will get stored in your google notebook
[05:14] <orbin> WaxyFresh: they've just ripped some debian instructions.  splashy seems to be in universe
[05:15] <WaxyFresh> orbin: thanks
[05:15] <smyke1> I just upgraded from 6.10 to 7.04 and now Dan's Guardian does not work nor does my Internet... (so dan;s guardian isnt really an issue since it has no internet)
[05:15] <mezziah> zeth: i know there's a easier method around, but the more complicated would be changing "feisty" in "gutsy" in your sources.list, doing a apt-get update and then installing the packages you want.. then return to "feisty"
[05:15] <mezziah> an*
[05:15] <Whitor> hi
[05:15] <Whitor> when I'm installing an application using Wine, and the application spans several CD's, When it comes time to insert the second CD, the cd-rom won't eject, Ubuntu tells me that another application is using the device
[05:16] <Whitor> and it won't let me eject
[05:16] <zeth>  mezziah cheers I try that
[05:16] <RivaeAerya> Shamail: Oh, you mean Zoho notebook? well, yeah, that one's nice
[05:16] <AzmodanZ> alguem pode me ajudar a configurar o DGlog para o dansguardian ?
[05:16] <sTaTix_1> rythmbox will not open
[05:16] <Shamail> Try this /sbin/fuser -mv /dev/hdc
[05:17] <sTaTix_1> acts like it is, i've reinstalled twice... nothing ever appears
[05:17] <Whitor> no hables espanol
[05:17] <Shamail> Then kill the app that is using the device
[05:17] <Chabacano> AzmodanZ, #ubuntu-es
[05:17] <mezziah> AzmodanZ: por favor visita el canal #ubuntu-es
[05:17] <AzmodanZ> gracias
[05:18] <dfgas> how do i get the icons that are on the gnome desktop from when stuff is mounted in media, on kde?
[05:18] <wols> Whitor: wine eject <driveletter of cd>
[05:18] <dfgas> desktop
[05:18] <Whitor> Wols Thank you Very much!
[05:19] <f_akmal> hi all, I need help with running ubuntu from my USB. I need to use a customized xorg.conf but ubuntu keeps changing my settings
[05:19] <SAM_theman> !firefox
[05:19] <ubotu> firefox is the default web-browser on Ubuntu. To install the latest version, see https://help.ubuntu.com/community/FirefoxNewVersion Installing plugins: https://wiki.ubuntu.com/FirefoxPlugins
[05:19] <gamejunkiejim> gamejunkiejim@gamejunkiejim-desktop:~$ su
[05:19] <gamejunkiejim> Password:
[05:19] <gamejunkiejim> su: Authentication failure
[05:19] <gamejunkiejim> Sorry.
[05:19] <mezziah> gamejunkiejim: use sudo instead
[05:20] <wols> gamejunkiejim: there is no su for ubuntu
[05:20] <venomgfx> hey there, anyone knows a good bluetooth transfer tool?
[05:20] <Shamail> This is the only case of wrong pass
[05:20] <wols> gamejunkiejim: cause there is no root pw
[05:20] <gamejunkiejim> Oh
[05:20] <gamejunkiejim> Well, that simplifies things a lot
[05:20] <gamejunkiejim> told you I was a newb.
[05:20] <Shamail> U are right, first try a trick to set root pass. Give sudo passwd
[05:21] <smyke1> i restarted networking an got nothing
[05:21] <gamejunkiejim> How shall I accomplish that, with my rudimentary knowledge?
[05:21] <M4j> i am new to Linux and UBUNTU
[05:21] <wols> Shamail: don't tell people to axtivate the root account in here
[05:21] <Shamail> On a terminal issue the command that i told
[05:21] <wols> !root | Shamail
[05:21] <ubotu> Shamail: do not try to guess the root password, that is impossible. Instead, realise the truth.. there is no root password. Then you will see that it is sudo that grants you access and not the root password. Look at https://help.ubuntu.com/community/RootSudo
[05:22] <Shamail> sudo passwd
[05:22] <M4j> can someone help me
[05:22] <wols> !ask | M4j
[05:22] <ubotu> M4j: Don't ask to ask a question. Just ask your question :)
[05:22] <Shamail> You will be prompted to change the pass without being asked 4 the previous one
[05:22] <venomgfx> ok, will try to do that so
[05:22] <gamejunkiejim> IT WORKED
[05:22] <gamejunkiejim> THANKYOUTHANKYOUSPAM!!11etc.
[05:22] <Rio79> whats the best remote desktop software that you guys have used for windows to ubuntu?  currently, im using cygwin/x with putty, but it doesnt display the top and bottom task bars.....
[05:22] <mezziah> hooray.
[05:23] <Surkow> @ wols - It seems my ethernet connection does not work because it won't get an ip from the router (I don't know if you remember this http://pastebin.com/931853). I'm still thinking of ways how to solve it.
[05:23] <sTaTix_1> anyone happen to know why rythmbox will not alunch for me
[05:23] <smyke1> Surkow: is that the routing table?
[05:24] <venomgfx> I transfered a 16meg vid to my phone via bluetooth, in xp. When I try to download this file through bluetooth in ubuntu, the cellphone turns off after a few megs transfered :S, anyone knows something about?
[05:24] <wols> Surkow: you can't get an iP as long as the link is down: 573.686985]  ADDRCONF(NETDEV_UP): eth1: link is not ready
[05:24] <gamejunkiejim> I also added myself to every group for good measure
[05:24] <wols> Surkow: that is your problem. not dhcp
[05:24] <juan278> smyke1: launch it from console and have a look at the bugs
[05:24] <Rio79> anyone?
[05:24] <wols> venomgfx: ask your cellphone maker unless ubuntu powers off
[05:24] <juan278> sTaTix_1:  launch it from console and have a look at the bugs
[05:24] <topcat1027> how can i make it so windows is my default kernel again
[05:25] <venomgfx> in xp the file transfered ok, withouth problems, in ubuntu it just turns off the cellphone :(
[05:25] <Surkow> @smyke1 - it's the content of dmesg |grep eth. @wols - so it's only a problem with my switch/router/modem?
[05:25] <venomgfx> after a meg or two
[05:25] <Surkow> @smyke1 - it's the content of dmesg |grep eth. @wols - so it's only a problem with my switch/router/modem?
[05:25] <gamejunkiejim> that is relevant to my interests, although not my question
[05:25] <wols> Surkow: could be a card problem too for some reason.
[05:25] <Azul> windows is not a kernel
[05:25] <government> hallo
[05:25] <sTaTix_1> juan278 how do I do that
[05:25] <topcat1027> my bad, how can i make it so windows loads up at start up instead of ubuntu
[05:25] <gamejunkiejim> Edit the GRUB file
[05:25] <Tom47> Rio79 if you set up freenx server in ubuntu and get the windows nx client from the web this works well
[05:25] <gamejunkiejim> Put windows up top
[05:26] <wols> Surkow: but more lilely a swtich problem. can you connect directoly to the router/mdeom for testing?
[05:26] <topcat1027> gamejunkiejim, how do i do that
[05:26] <Surkow> @wols - with two different chipsets?
[05:26] <Surkow> yes I can wols
[05:26] <wols> Surkow: try it
[05:26] <gamejunkiejim> Er, well, I don't remember really
[05:26] <juan278> open us a konsole(not sure what its called in gnome it might be terminal or gconsole) then type rythembox and see what happen
[05:26] <NET||abuse> Hey all, still having issues with democracy, is anyone else out there using it/having issues with playing 2 videos in a row 0.9.2 on feisty???
[05:26] <Azul> topcat1027: put in the windows cd and boot from there, then go to the recovery console and type fixmbr or fdisk /mbr
[05:26] <jrodolfo> help-me, Modules for NIC SIS190
[05:26] <topcat1027> azul, i don't want to get rid of ubuntu tho
[05:26] <Azul> topcat1027: that's if you want to completely remove ubuntu
[05:26] <Rio79> Tom47: okay, ill give that a shot... thanks!
[05:26] <gamejunkiejim> If he does that, it hides Linux doesn't it?
[05:26] <Azul> topcat1027: oh ok
[05:27] <Surkow> @wols - It will take a time...I need to create a new cable then...(15m)
[05:27] <topcat1027> azul, i just want to make it so windows it at top of the grub like gamejunkiejimmie said
[05:27] <topcat1027> how do i edit my grub file?
[05:27] <sTaTix_1> where would it be
[05:27] <gamejunkiejim> I remember opening it in gedit
[05:27] <Azul> topcat1027: edit /boot/grun/menu.lst
[05:27] <gamejunkiejim> The loader menu configuration
[05:27] <gamejunkiejim> I just don't remember where I found it
[05:27] <Tom47> Rio79 seveas has a repo with a feisty freenx server deb
[05:28] <M4j> help to install Adobe Flash Player
[05:28] <Pici> !flash | M4j
[05:28] <wols> topcat1027: sudo nano /boot/grub/menu.lst
[05:28] <gamejunkiejim> I'm wondering if my bootloader automatically updated with my new install here
[05:28] <sTaTix_1> how do i open a console
[05:28] <wols> M4j: what version of ubuntu? i386 or amd64?
[05:28] <ubotu> M4j: To install Flash see https://help.ubuntu.com/community/RestrictedFormats/Flash - Flash 9 is now available in dapper-backports and edgy-backports - See also !Restricted and !Gnash
[05:28] <M4j> 6.1.0
[05:28] <gamejunkiejim> I used to have ubuntu as default, edubuntu and XP
[05:29] <Tom47> sTaTix_1: Applicatiosn accessories terminal
[05:29] <topcat1027> wols, ok, it took me to this file, but now what
[05:29] <gamejunkiejim> I've permanently destroyed Windows
[05:29] <wols> topcat1027: you edit it.
[05:29] <gamejunkiejim> So I wonder if Grub will have taken it off for me or not
[05:29] <Shamail> Gamejunkie: but why
[05:29] <sTaTix_1> k thnx
[05:29] <topcat1027> wols, there isn't anything there
[05:29] <wols> gamejunkiejim: afaik it won't
[05:29] <gamejunkiejim> Why did I delete Windows?
[05:29] <SAM_theman> !firefox
[05:29] <wols> topcat1027: then you're not using the right file.
[05:29] <ubotu> firefox is the default web-browser on Ubuntu. To install the latest version, see https://help.ubuntu.com/community/FirefoxNewVersion Installing plugins: https://wiki.ubuntu.com/FirefoxPlugins
[05:29] <CNTRLX> windows permanently destroyed windows
[05:29] <Shamail> Ya
[05:29] <wols> menu.lst L S T
[05:30] <topcat1027> wols, what should i do?
[05:33] <Shamail> Means so attached to linux or something...
[05:33] <gamejunkiejim> I liked GNOME so much, I figured KDE would be just as awesome
[05:33] <Ying_Ko> I recently switched myself...glad I still have a windoes machine
[05:33] <Rio79> Tom47 whats seveas?  thanks seperate from freenx?
[05:33] <Azul> gamejunkiejim: i hated kde
[05:33] <juan278> sTaTix_1:  its a program you can run itll be described as a terminal emulator
[05:33] <wols> topcat1027: you should open the right file
[05:33] <gamejunkiejim> I still have a Windows machine
[05:33] <topcat1027> wols, how can i know what the right file is
[05:33] <wols> topcat1027: I told you
[05:33] <gamejunkiejim> I have Media Center 2005 on my television
[05:33] <wols> topcat1027: twice in fact
[05:33] <sls_> is there an ubuntu server channel?
[05:33] <Shamail> Fine!
[05:33] <wols>  /boot/grub/menu.lst
[05:33] <Azul> sudo gedit /boot/grub/menu.lst
[05:33] <gamejunkiejim> But even that PC boots into GNOME
[05:33] <Tom47> seveas is an ubuntu communityidentity who, inter alia, has packaged up freenx for feisty
[05:33] <orbin> sls_: #ubuntu-server
[05:33] <sls_> thank you
[05:33] <topcat1027> wols, sorry, it's saying permission denied, what do i do?
[05:33] <sTaTix_1> segmentation fault core dumped
[05:33] <sTaTix_1> wtf
[05:33] <wols> topcat1027: you didn't type what I wrote
[05:33] <topcat1027> i typed: /boot/grub/menu.lst
[05:33] <wols> topcat1027: that's the file you edit. nothing to run
[05:33] <Rio79> Tom47 okay... ill try it out
[05:33] <Rio79> Tom47 thanks
[05:33] <wols> and I gave you a complete comandline before
[05:33] <topcat1027> so do i type it into terminal or alt f2 or what?
[05:33] <Tom47> Rio79: http://free.linux.hp.com/~brett/seveas/freenx/
[05:33] <karmic> hey guys, im using feisty on a newly installed ibm t60 laptop, the sound is very quiet, and if i max it out its very distorted also, i couldnt find anything which helped me fix this on google or the ubuntu forums, any ideas?
[05:33] <Azul> i need a program that can burn mp3 files to audio cd without writing an ISO or anything on the hard drive
[05:33] <Azul> anyone knows?
[05:33] <ed1t> where can i find java /bin ? i installed from the apt....i gotta set JAVA_HOME variable
[05:33] <karmic> k3b?
[05:33] <karmic> Azul : k3b?
[05:33] <hendrixski> wols, aarrrgg.... when I'm in the chroot it tells me I can't write anything... read-only file system
[05:33] <karmic> Azul : i think brasero also
[05:33] <sTaTix_1> juan278 what is a segmentation fault core dumped
[05:33] <Azul> topcat1027: type in the terminal "sudo gedit /boot/grub/menu.lst"
[05:33] <karmic> Azul : i know for a fact nero can do this, but it costs money
[05:33] <Whitor> Wols, How do I get the wine app to acknowledge the new disk... wine eject d: got the fitrst disk out... but when I put the new disk in and answer the ok for the new disk insert... it just askes for it again
[05:33] <wols> Whitor: mount the disk?
[05:34] <hendrixski> wols, and I did the whole thing as root
[05:34] <Azul> karmic: i'm using gnomebaker and it has to convert mp3 to audio cd first then burn the disk
[05:34] <orbin> karmic: sound like the pcm slider is too high
[05:34] <Azul> karmic: are you sure those don't do the same thing?
[05:34] <DELUDE> Q: how do i enable ethernet cards (they show up in the Network GUI but ifconfig shows nothing)
[05:34] <juan278> sTaTix_1: to be honest i have no idea i normally find simple problems, segmentation fault sounds like a major error, like the programs broken, my only IDEA is to reinstall the whole program
[05:34] <wols> DELUDE: ifocnfig -a. does it show up? and what is in your /etc/network/interfaces ?
[05:34] <Whitor> wols, hmm... I thought it was, but you might be right
[05:35] <wols> sTaTix_1: a segfault is a program crash. a GPF in windows terms
[05:35] <sTaTix_1> I've tried
[05:35] <sTaTix_1> do I have to use this package manager
[05:35] <sTaTix_1> or can I go download it fromt he web
[05:35] <karmic> orbin, nah its not that
[05:35] <sTaTix_1> wols anykind of idea what to do
[05:36] <wols> sTaTix_1: the packagemanager downlaod fromt he web... but you can download via packages.ubunut.com. it's just a lot harder since you have to do your own dependency checking
[05:36] <SleepingSloth> can anyone tell me how I could disable middle mouse click?
[05:36] <topcat1027> wols, ok, so i just move the windows xp home edition to the top of the list?
[05:36] <sTaTix_1> wols crap... i have no clue what to do then.... i dunno what dependecy checking even ia
[05:36] <Azul> SleepingSloth: i think you can do that by editing /etc/X11/xorg.cong
[05:36] <Azul> conf*
[05:37] <sTaTix_1> is, let a lone how to do it
[05:37] <gamejunkiejim> That should work topcat
[05:37] <topcat1027> thanks jim, thanks wols
[05:37] <gamejunkiejim> You can take out the "Other Operating Systems" line too
[05:37] <Whitor> wols: it says the cdrom is already mounted or busy ...
[05:37] <SleepingSloth> Azul - I've tried turning off "emulate 3 buttons" - really I just want to stop my scroller from pasting (its a bit twitchy)
[05:38] <gamejunkiejim> Alright, gonna go try some stuff out
[05:38] <gamejunkiejim> Thanks for all the help everyone
[05:38] <gamejunkiejim> I'll probably be back
[05:38] <topcat1027> yes, thanks jim and thanks wols, sorry i'm a nub
[05:38] <Whitor> I tried to umount firt too
[05:38] <Whitor> firt =- first
[05:38] <Azul> SleepingSloth: sudo gedit /etc/X11/xorg.conf > delete the Option "ZAxisMapping" "4 5" line
[05:39] <Azul> SleepingSloth: make a copy of that file in case things screw up
[05:39] <SleepingSloth> Azul - will that leave the scroller working as normal?
[05:40] <Azul> SleepingSloth: i don't recon
[05:40] <wols> Azul: that will remove whis scroll wheel functionality. not the mousebutton
[05:40] <Azul> wols: any other ideas?
[05:41] <wols> no. tho it's probably a xorg.conf setting
[05:41] <bobbob1016> Can anyone help me with my file associations?  I can't change file associations, even after I open the "Open With" tab, I can't select any of the programs listed there.
[05:42] <m4j> help install flash player
[05:43] <elYase> is there any software to make PC to phone calls for free?
[05:44] <karmic> hey guys, im using feisty on a newly installed ibm t60 laptop, the sound is very quiet, and if i max it out its very distorted also, i couldnt find anything which helped me fix this on google or the ubuntu forums, any ideas?
[05:44] <wols> !flash | m4j
[05:44] <ubotu> m4j: To install Flash see https://help.ubuntu.com/community/RestrictedFormats/Flash - Flash 9 is now available in dapper-backports and edgy-backports - See also !Restricted and !Gnash
[05:44] <martin_> Azul - that didnt work, but I've sorted it now, if you're interested, I changed the protocal from LmPS/2 to ExplorerPS/2
[05:45] <m4j> i am new to all this
[05:45] <Moduliz0r> Ubuntu is mounting my cd roms as /dev/hdc and hdd, and it cant open them
[05:45] <martin_> Azul - but thanks for the support, and pointing me in the right direct :)
[05:45] <Moduliz0r> what the hell is going on?
[05:45] <dlinsky> Hi
[05:45] <Moduliz0r> hi
[05:45] <m4j> hi
[05:46] <Moduliz0r> anyone know whats going on with my CD drives?
[05:46] <martin_> Azul - I was in as SleepingSloth a moment ago, if you're confused... :S
[05:46] <Azul> martin_: ohhhhhhh ok
[05:46] <hendrixski> wols,  I unmounted and remounted the chroot and now it let me write to the file... but now it tells me that the disk is full (even though df -h says otherwise)
[05:46] <wols> m4j: that's why you should read a lot.like the URL ubotu gave you
[05:46] <Azul> marin_: i was going crazy
[05:46] <kristofer> word.. my xorg.conf has 1400x1050 and 1024x768 with a default depth of 24 configured.. but the screen resolution options in my system preferences menu still say 1024x768 and 800x600. how do I adjust the resolution?
[05:46] <bthornton> Anyone running the NX/NoMachine Client on Feisty x86_64?
[05:46] <dlinsky> I've got some trouble with my terminal logon via XDMCP... anybody who can help me?
[05:46] <martin_> Azul - cheers matey - I've got to jet now... bb
[05:46] <gsyjasp> hola
[05:46] <gsyjasp> k pasa
[05:47] <Pici> !es | gyaresu__
[05:47] <gsyjasp> ajdsklfasdjfkljdsfklasdjfasfa
[05:47] <gsyjasp> s
[05:47] <gsyjasp> s
[05:47] <ubotu> gyaresu__: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[05:47] <gsyjasp> sdf
[05:47] <gsyjasp> a
[05:47] <wols> kristofer: what monitor? can it do 1440x1050?
[05:47] <Rio79> Tom47 how do you add it to the repository (what url do i type in the sources.list)?
[05:47] <Pici> gyaresu__: Sorry about that, mis type.
[05:47] <kristofer> wols, yeah, it's a dell d610 lappy
[05:47] <wols> kristofer: and especially at required refresh time
[05:47] <Moduliz0r> anyone know whats going on with my CD drives?  buntu is mounting my cd roms as /dev/hdc and hdd, and it cant open them
[05:47] <Rio79> Tom47 it doesnt really say in the website
[05:47] <tomplast> Hi everyone. Is there anyone who can help me find a working usb tv capturing device that works with GNU/Linux?
[05:48] <hendrixski> :-( screw this.... does anyone have an alternate CD that lives near Worcester Mass??
[05:48] <Ayarcy> !mp
[05:48] <ubotu> Sorry, I don't know anything about mp - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[05:48] <Ayarcy> !mp3
[05:48] <ubotu> For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats
[05:48] <eduhat> hey guys, how would i unzip a .tar.bz2?
[05:48] <tabris|away> hendrixski: I know somebody who might... but i'm not sure how you'd contact him.
[05:48] <Whitor> Ok, I've gotten the disk out... how do I remount a cdrom when I am using Wine ?
[05:48] <tabris|away> hendrixski: guy goes to WPI.
[05:48] <pha|con> eduhat: tar -xf filname.tar.bz
[05:48] <Ayarcy> eduhat: tar -xvjf file.tar.bz2
[05:48] <hendrixski> tabris|away, that's awesome
[05:48] <Ayarcy> eduhat: Or bunzip2
[05:49] <wols> Whitor: what is your cdrom? what mountpoint?
[05:49] <CraZy675>  when I try to run swiftfox I get the error: Segmentation fault (core dumped)
[05:49] <Whitor> the OS still thinks the first disk is in the drive
[05:49] <Whitor> its /dev/sdo
[05:49] <Moduliz0r> Anyone know why ubuntu mounts my cd drives as /dev/hdd and /dev/hdc and cant read them?
[05:49] <Whitor> its /dev/sd0
[05:49] <soundray> tomplast: it's difficult to know before you've tried. Internals tend to change while model names stay the same.
[05:49] <wols> Whitor: no that's not it. that's no mountpoint
[05:49] <Whitor> sorry ... /dev/scd0
[05:49] <hendrixski> tabris|away, because I promised these friends in worchester that i'd install Ubuntu for them while visiting them on vacation... and it's just not working... and I have no way of burning an alternate CD :-(
[05:49] <tabris|away> hendrixski: assuming you also go to WPI, you could probably find him easily enough.
[05:49] <wols> Whitor: still no mountpoint
[05:49] <tomplast> soundray: Do you have tried any?
[05:49] <Whitor> its mounted to /media/cdrom0
[05:49] <Ayarcy> !repeat | Moduliz0r
[05:49] <ubotu> Moduliz0r: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. You can search https://help.ubuntu.com or http://wiki.ubuntu.com while you wait. Also see !patience
[05:49] <wols> Whitor: mount /media/cdrom0 then
[05:50] <dlinsky> I've been using remote logon via XDMCP for some time now, but the last few days logging in and remote working has become terribly slow. Any ideas? I have not changed anything except connecting a new monitor
[05:50] <hendrixski> tabris|away, I don't go to WPI  :-( I'm visiting friends on vacation and I hozed their computer with the regular install CD :-(
[05:50] <soundray> tomplast: I've tried a noname device with a Dibcom chipset which works with kernel 2.6.18 and above
[05:50] <Whitor> it says its already mounted or busy
[05:50] <Whitor> the icon for the first disk is still on the desktop
[05:50] <soundray> tomplast: I've also tried the MSI-580 (most popular one at the moment I believe), which doesn't work so well.
[05:50] <Pooky> where does one change their "real name" at?
[05:51] <Whitor> and when I try to right click and 'eject' that... it says the cdrom is busy
[05:51] <tomplast> soundray: Okay. I guess I will go for a            TerraTec Cinergy T USB XE which will maybe work (according to some...).
[05:51] <gordonjcp> Pooky: registrar's office?
[05:51] <Pooky> For example, if I finger myself, the name it returns.
[05:51] <Whitor> says cannot unmount volume
[05:51] <gordonjcp> Pooky: System -> Users & Groups
[05:51] <wols> Whitor: unmount it then, then mount it again
[05:51] <tomplast> soundray: I think Linux really needs a good hardware compatabillity list which list distribution/kernel for each hardware *-)
[05:51] <Whitor> cant unmount it
[05:51] <soundray> tomplast: perhaps you can order from a dealer who will give you a no-quibbles exchange
[05:51] <wols> check with nautilus or whatever what is on
[05:51] <hendrixski> tabris|away, could you ask your friend at WPI if they wouldn't mind handing off an alternate install CD at a cafe or something??
[05:51] <Whitor> or I'm unmounting it incorrectly
[05:52] <tomplast> soundray: Perhaps but it's so little money *-). About 20
[05:52] <soundray> tomplast: start compiling one, and you will soon learn why there isn't any ;)
[05:52] <tomplast> oh
[05:52] <tomplast> 30
[05:52] <tomplast> soundray: compiling one?
[05:52] <Tom47> Rio79: its a tad out of date but you can adapt this guide ... to feisty vs dapper and any particular changes in the specific repo yoiu use https://help.ubuntu.com/community/FreeNX
[05:52] <tomplast> soundray: I thought something like a user contributed hardware site.
[05:52] <soundray> tomplast: compiling, as in gathering information (not the gcc sense)
[05:52] <heroin> how can i check the file system of a partition?
[05:53] <wols> tomplast: there are
[05:53] <soundray> tomplast: something like tuxmobil for laptops?
[05:53] <m4j> i went to the address https://help.ubuntu.com/community/RestrictedFormats/Flash
[05:53] <m4j> and i went to the add/remove
[05:53] <tomplast> soundray: I know that there are some out there but I would like one universal. For all Linux versions. All kernel versions/distributions.
[05:53] <kylefox_> I tried installing Netatalk with apt-get, now it seems to cause errors when I try to install stuff with apt-get.  Says "1 not fully installed or removed"
[05:53] <sTaTix_1> i can't even get a basic mp3 player to work... what is so great about ubuntu... everythin is so damn complicated
[05:53] <wols> tomplast: it exists
[05:54] <m4j> and it tell me i can not add flash player
[05:54] <Imitation> heroin: fsck <your-partition>
[05:54] <tomplast> soundray: Tell me about one... Which aint just for one thing (like laptops)
[05:54] <Phenom00v> is anyone familiar with paragon partition manager?
[05:54] <tomplast> soundray: Which is universal.
[05:54] <wols> m4j: exact error message please
[05:54] <tomplast> soundray: Translated...
[05:54] <tomplast> Soundray: ooh
[05:54] <wols> Phenom00v: no. we use gparted
[05:54] <m4j> no error
[05:54] <tomplast> Soundray: forget the last part :P
[05:54] <soundray> tomplast: I don't know any. Back on your original question, I found this: http://www.linuxtv.org/wiki/index.php/Main_Page
[05:54] <wols> m4j: you most probably haven't enabled multiverse
[05:54] <wols> !multiverse | m4j
[05:54] <ubotu> m4j: The packages in Ubuntu are divided into several sections. More information at https://help.ubuntu.com/community/Repositories and http://www.ubuntu.com/ubuntu/components - See also !EasySource
[05:55] <wols> !easysource | m4j
[05:55] <ubotu> m4j: source-o-matic is a webpage where you can (re)generate your sources.list - http://www.ubuntu-nl.org/source-o-matic
[05:55] <m4j> The use, modification and distribution of Macromedia Flash plugin is restricted by copyright or by legal terms in some countries.
[05:55] <m4j> Macromedia Flash plugin cannot be installed on your computer type (powerpc). Either the application requires special hardware features or the vendor decided to not support your computer type.
[05:55] <wols> m4j: there is your answer. ther is no flash for your system, preiod
[05:55] <tomplast> soundray: Yeah but it's only for TV-related hardware. I thought something more complete which contains storage devices, network cards, sound cards, graphics cards etc.
[05:55] <m4j> i can download it
[05:55] <sTaTix_1> ok, so other than rythymbox... what else supports coverart and has a jukebox/itunes feel?
[05:55] <wols> m4j: which the url I linked to clearly says: i386 only. also I aske you i386 or adm64 and you didn't answer
[05:55] <m4j> i need help
[05:56] <m4j> install
[05:56] <m4j> it
[05:56] <Pici> !enter | m4j
[05:56] <Paddy_EIRE> m4j, https://help.ubuntu.com/community/RestrictedFormats/Flash#head-38245bd46a3334b4cc11601e161ddaa63439d2db
[05:56] <ubotu> m4j: Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation!
[05:56] <wols> m4j: downlaod where?
[05:56] <wols> Paddy_EIRE: he has a poweppc
[05:56] <wols> *powerpc
[05:56] <Whitor> keep getting : umount: /media/cdrom0: device is busy
[05:56] <Paddy_EIRE> wols, check the link
[05:56] <Imitation> sTaTix: amarok
[05:56] <m4j> yes powerpc
[05:56] <Whitor> when I try to mount... :mount: according to mtab, /dev/scd0 is already mounted on /media/cdrom0
[05:56] <dlinsky> Any experts on XDMCP around here?
[05:56] <Whitor> so do I need to edit mtab ?
[05:56] <Paddy_EIRE> m4j, that link covers powerpc
[05:57] <m4j> macromedia web site
[05:57] <sTaTix_1> k, thansk
[05:57] <Whitor> thats a bit of hoop jumping for a simple disk swap
[05:57] <Paddy_EIRE> m4j, this tells you how https://help.ubuntu.com/community/RestrictedFormats/Flash#head-38245bd46a3334b4cc11601e161ddaa63439d2db last time
[05:57] <wols> Paddy_EIRE: neither gnash or swfdec are stable enough yet for general use
[05:57] <Paddy_EIRE> wols, better than nothing
[05:57] <wols> Whitor: lsof /media/cdrom0
[05:58] <soundray> Whitor: those errors usually mean that something is still accessing your CD. Could even be a shell where you've cd'd to the mount point. Listen to wols
[05:58] <tomplast> soundray: Right now you'll have to search round and around in different databases to find something reliable, I don't say that Linux support is bad but I think the knowledge of which works and doesn't works should be contained in ONE database. I really hope something makes the move one day. Anyway, thanks for your help.
[05:58] <incorrect> does anyone know of a project management tool that has an external api,
[05:59] <Whitor> lsof:  bash    30193 mcneany  cwd    DIR   11,0 2048 1728 /media/cdrom0
[05:59] <wols> you have bash inside /media/cdrom0 somewhere
[05:59] <pumpkinhead> hello. has anyone else had difficulty with using dual layer dvd+ disks in feisty?
[05:59] <wols> kmost probably from where you started wine for the installing
[06:00] <Whitor> hmm... closing  everything
[06:00] <Rio79> quick question about repos.... the lines in sources.list reads "deb <link> <item1> <item2>".  is item1 and item2 just labels, or is the naming notation important to downloading the repositories?
[06:01] <soundray> Rio79: critically important
[06:01] <Whitor> the main bash window that I invoked wine from is in that dir
[06:01] <Rio79> soundray both items? okay
[06:01] <Pici> Rio79: Important, but configurable by the repository owner. i.e not you ;)
[06:01] <Whitor> if I kill it I will likely kill the installer
[06:01] <GizDrak> Hey all got a quick question. about partitions make sure I I am doing this right. I have 2.2TB of space on 1 logical drive in a raid 5 configuration of 4 P-Drives. I setup my partitions has  1: swap 1gb 2: /boot 256mb 3: / 10gb 4: /home 10gb 5: LVM 2.1TB does this look like a good setuo for a file server?
[06:01] <Rio79> thanks fellas
[06:01] <soundray> Rio79: check out man sources.list
[06:01] <Whitor> right now wine is dumping reports out to that console
[06:02] <christoph__> \quit
[06:03] <novato_br> how can I ignore line comand on xchat ?
[06:03] <Whitor> wait... I think I got it
[06:03] <novato_br> how can I line comand ignore  on xchat ?
[06:04] <Tom47> Rio79:  deb http://free.linux.hp.com/~brett/seveas/freenx feisty-seveas freenx
[06:04] <rockets> anybody having trouble with the us.archive.ubuntu.com repository
[06:04] <kylefox_> Can anyone please have a look at this apt error i'm getting?  http://dpaste.com/12541/
[06:04] <Dimensions> hiya ... i have a few remote machines with RSA keys in it ... but my ip has changed i by mistake have put my current ip in hosts.allow file located at /home/user directory but not in /etc/hosts.allow ... can i some how access those machines by any means if i know its passwords ..... they are very important machines ... and i can't access them physically very easily ...
[06:04] <Rio79> Tom47 haha got it... you knew exactly what i was doing
[06:05] <Tom47> Rio79: the gpg key is on the first url i gave you
[06:05] <baconbacon> Hi, can anybody give me some pointers about how to have one fs spanning two disks? My google-fu is weak
[06:05] <Whitor> wols: Got it! Thanks for the help
[06:06] <soundray> rockets: works fine here
[06:06] <hyphenated> baconbacon: LVM ?
[06:06] <Tom47> Rio79: good luck with that i am for bed now
[06:07] <wols> baconbacon: lvm2
[06:07] <wols> !lvm2
[06:07] <ubotu> Sorry, I don't know anything about lvm2 - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[06:07] <wols> !lvm
[06:07] <ubotu> Tips and tricks for RAID and LVM can be found on https://help.ubuntu.com/community/RaidConfigurationHowto and http://www.tldp.org/HOWTO/LVM-HOWTO
[06:07] <Rio79> cool thanks Tom47!
[06:07] <baconbacon> ok thanks
[06:07] <CommanderCool> this guide: http://wiki.ubuntuusers.de/Pinnacle_PCTV_USB_Stick does not work
[06:08] <endlessguitar> hello people
[06:08] <endlessguitar> can some1 help me?
[06:08] <rubydo> Hi, on Fesity 7.04, sound works for pretty much all apps, but not for Rhythmx / SoundJuicer - I've Googled it but am getting no joy - anyone any hints?
[06:08] <soundray> CommanderCool: it's a wiki page. You can correct it yourself
[06:09] <predaeus_> endlessguitar, just ask
[06:09] <endlessguitar> ok
[06:09] <CommanderCool> soundray: true, if i knew how to solve the problem
[06:09] <endlessguitar> anyway I have download a game called frets on fire to linux and extract it to desktop
[06:09] <karmic> hey guys, i have a lenovo t60, and if i enable desktop effects, my screen turns white, any ideas?
[06:09] <soundray> CommanderCool: if you have a problem, then describe the problem.
[06:09] <endlessguitar> but how I play it?
[06:09] <endlessguitar> what need I to do?
[06:10] <tunmagochi> Hi, I'm very new with this Ubuntu 7. I just installed the OS yesterday and my computer has no sound. I really cannot figure out how to fix this. Can anyone give me some helps? What is likely to be the problem?  It seems that the system knows my hw, btw. I ran lspci and it showed my hw but I cannot see what is the problem.
[06:10] <heroin> how can i check the file system of a partition?
[06:10] <CommanderCool> does anyone know how to setup "Pinnacle PCTV USB Stick"?
[06:10] <endlessguitar> ?
[06:10] <soundray> !sound > tunmagochi, please see the private message from ubotu
[06:11] <pumpkinhead> feisty does not seem to recognize my dual layer dvd's, labels them CD-ROM's, no read access, though the gnome icon is DVD-blue. do i have some bad media? have not tried any DL's with ubuntu before
[06:11] <predaeus_> endlessguitar, probably you just need to run the binary. is there a bin directory inside?
[06:11] <m4j> do you know why i can not upgrad to 7.04
[06:11] <soundray> heroin: do you want to see what filesystem is on a partition, or whether it is corrupted?
[06:11] <predaeus_> endlessguitar, or some .sh file?
[06:11] <endlessguitar> hmm I check 1 sek
[06:11] <tarnap> hell yeah!
[06:11] <rubydo> !sound > rubydo
[06:11] <tarnap> someone using the swiss-german layout in here?
[06:11] <soundray> !anyone | CommanderCool
[06:11] <dlinsky> Can anybody help me with XDMCP?
[06:11] <ubotu> CommanderCool: A large amount of the first questions asked in this channel start with "Does anyone/anybody..."  Why not ask your next question (the real one) and find out?
[06:12] <endlessguitar> its one bin
[06:12] <endlessguitar> .bin file
[06:12] <soundray> CommanderCool: describe the problem
[06:12] <alesan> is it possible to create a separate log file for a process? it writes in /var/log/messages but I'd like something separated from the rest.
[06:12] <endlessguitar> fretsonfire.bin
[06:12] <skulrid> hello
[06:12] <CommanderCool> as my question said, i dont know, how to set it up
[06:12] <predaeus_> endlessguitar, ? so it unpacked to a singel file?
[06:12] <endlessguitar> and then loads of .so files +  .txt
[06:12] <endlessguitar> no its one directory full of files
[06:12] <heroin> soundray: what type it is
[06:13] <skulrid> someone's been doing things on my pc, is there a way to see what he did? opened files, etc??
[06:13] <m4j> HELLO Dose anyone know my i can not upgrade to 7.04
[06:13] <heroin> soundray: because i have a harddrive but i dont think its ntfs or vfat or ext*
[06:13] <predaeus_> endlessguitar, then try ./fretsonfire.bin  in a console inside that directory
[06:13] <PartisanEntity> does anyone here have experience with viewing .pmf files in Ubuntu?
[06:13] <Doctor_> whats pmf?
[06:13] <endlessguitar> ?
[06:14] <endlessguitar> what you mean?
[06:14] <endlessguitar> will I use terminal
[06:14] <endlessguitar> and write that?
[06:14] <PartisanEntity> i think it is a fax file (from windows perhaps)
[06:14] <soundray> heroin: sudo fdisk -l /dev/hda
[06:14] <pumpkinhead> m4j: what problems are you having?
[06:14] <demonstealer> what is  a .cgwdtheme? which manager does it install with?
[06:14] <ivanrubio> ivan  rubio   sanche
[06:14] <Doctor> PartisanEntity: try running it through imagemagick
[06:14] <soundray> CommanderCool: you need to be a bit more precise
[06:14] <PartisanEntity> ill give it a try, thanks
[06:15] <ivanrubio> ivanrubiosanchez
[06:15] <predaeus_> endlessguitar, yes, or double click that file
[06:15] <mosffit> hello world
[06:15] <heroin> soundray: SFS file system...
[06:15] <Doctor> convert lalala.pmf lalala.gif (because its lossless) or .png
[06:15] <endlessguitar> ok
[06:15] <endlessguitar> and then?
[06:15] <heroin> soundray:  u know if linux can write to sfs?
[06:15] <cryptos> hello, i'm italina
[06:15] <cryptos> hello, i'm italian
[06:15] <predaeus_> endlessguitar, what happened?
[06:15] <PartisanEntity> ill post back with results
[06:15] <sTaTix_1> mothertruckin mp3 support in arabok or whatever makes it feeze
[06:15] <nickrud> alesan, yes, you'd make changes to /etc/syslog.conf
[06:15] <novato_br> how can I ignore other people on Xchat ?
[06:15] <sTaTix_1> how do I just install mp3 support
[06:15] <alesan> nickrud, thanks
[06:15] <windmill2> apt-get tells me packages are withheld how can I fix that?
[06:15] <endlessguitar> nothing :S
[06:15] <endlessguitar> when I dubbeclick
[06:15] <Doctor> novato_br: have you tried /ignore?
[06:16] <skulrid> someone's been doing things on my pc, is there a way to see what he did? opened files, etc???
[06:16] <novato_br> yep, Doctor
[06:16] <predaeus_> endlessguitar, then try inside a terminal to get the error messages if there are any
[06:16] <Doctor> interested
[06:16] <novato_br> Doctor,  but i don't know about syntax
[06:16] <CommanderCool> soundray: okay, i followed the instructions on the mentioned site, installed the mentioned packages but then it tells me to download some repositories and this step does not work
[06:16] <soundray> heroin: I don't think it can
[06:16] <cryptos> if i start XGL + Beryl, gnome crash!! this is the paste of dmesg, i have a x700 with propriety Driver ATI ( http://rafb.net/p/NVZl8a49.html )
[06:16] <Doctor> --> /ignore Doctor
[06:16] <novato_br> i can't finde syntax about it
[06:16] <mosffit> is this ubuntu-dekstop.iso installer when installed in my box be also act as a server as long as i install those specific packages like example httpd or postfix and etc?
[06:16] <windmill2> apt-get tells me packages are withheld (I added a repository) how can I fix that?
[06:16] <novato_br> Doctor, here, doesn't works
[06:16] <Doctor> or /ignore *!*@*.vc.shawcable.net for everyone at my ISP
[06:16] <sTaTix_1> anyone?!? i need mp3 support for arabok... it won't do it itself... freezes.... where can I get it
[06:16] <Doctor> what client
[06:16] <endlessguitar> :S
[06:16] <endlessguitar> I tried
[06:16] <cryptos> if i start XGL + Beryl, gnome crash!! this is the paste of dmesg, i have a x700 with propriety Driver ATI ( http://rafb.net/p/NVZl8a49.html )
[06:16] <Pici> !mp3 | sTaTix_1 read this
[06:16] <ubotu> sTaTix_1 read this: For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats
[06:17] <endlessguitar> dosnt works :S
[06:17] <endlessguitar> can you remote?
[06:17] <windmill2> Is there a switch to tell apt-get to ignore the need for the keys?
[06:17] <heroin> ##linux
[06:17] <soundray> CommanderCool: do you mean the step that starts with 'hg'?
[06:17] <mosffit> anyone?
[06:17] <CommanderCool> soundray: correct
[06:17] <novato_br> thx Doctor
[06:17] <endlessguitar> I send you  a screenshot
[06:17] <pihus_> I think that my linux somewhy can't write to swap. how could I test it? I'm not 100% sure of it
[06:17] <predaeus_> endlessguitar, can you post a "ls -l" of the directory to the pastebin
[06:18] <soundray> CommanderCool: what do you get when you run 'sudo apt-get install mercurial'?
[06:18] <predaeus_> endlessguitar, http://paste.ubuntu-nl.org
[06:18] <endlessguitar> wahh ? sorry understand nothing ? that you said :S
[06:18] <windmill2> apt-get install-the-bloody-package-anyway-even-without-the-public-key
[06:18] <predaeus_> endlessguitar, use the above link and post the llink to your post here
[06:18] <soundray> CommanderCool: don't paste please, just say what it says
[06:18] <endlessguitar> daniel@daniel-laptop:~$ '/home/daniel/Desktop/FretsOnFire/FretsOnFire.bin'
[06:18] <endlessguitar> bash: /home/daniel/Desktop/FretsOnFire/FretsOnFire.bin: No such file or directory
[06:18] <endlessguitar> daniel@daniel-laptop:~$
[06:18] <endlessguitar> that just says
[06:18] <endlessguitar> :S
[06:18] <alesan> nickrud, do you have an idea how syslog.conf syntax is? how can I specify a particular process should log in a certain file?
[06:18] <CommanderCool> soundray: it is already installed
[06:19] <endlessguitar> http://paste.ubuntu-nl.org/26279/plain/
[06:19] <cryptos> if i start XGL + Beryl, gnome crash!! this is the paste of dmesg, i have a x700 with propriety Driver ATI ( http://rafb.net/p/NVZl8a49.html )
[06:19] <skulrid> I need to see what files has been open on ubuntu lately, is there a way to know??
[06:19] <nickrud> alesan, not particularly well. you can take a look at    man syslog.conf , there'll be some info there.
[06:19] <predaeus_> endlessguitar, do "cd /home/daniel/Desktop/FretsOnFire/"  then "ls -l" and post the output to the pastebin again please
[06:20] <nickrud> alesan, sorry about pointing at a man page, but it's the best I know right now
[06:20] <pumpkinhead> is there anything special i should have to do with feisty for it to access dual layer data dvd+ discs? (i'll be quiet after this)
[06:20] <wishie> from what i can see, snd-usb-audio.ko is not included in 2.6.20-16-generic kernel.. any reason for this ?
[06:20] <nwa|bruno> with wich command do i stop samba??
[06:20] <alesan> nickrud, sure thank you anyway
[06:20] <endlessguitar> ls? -l?
[06:20] <endlessguitar> whats that?
[06:20] <Bikerwade> Hi, im something of a n00b, but i need help getting my ubuntu-computer on my home-network. Anyone up for the task ?
[06:20] <soundray> CommanderCool: does it say '...does not appear to be an hg repository...'?
[06:20] <predaeus_> endlessguitar, run "man ls" to read up on whwat it is
[06:21] <CommanderCool> soundray: when i try that "hg ..."-command, yes
[06:21] <predaeus_> endlessguitar, quit man with "q"
[06:21] <endlessguitar> :S
[06:21] <Dimensions> hiya ... i have a few remote machines with RSA keys in it ... but since my IP has changed mistakenly  have put my current ip in hosts.allow file located at /home/user directory on remote systems but not in /etc/hosts.allow ... can I some how bypass RSA keys or to access those machines by any means if i know its passwords ..... I can not access them physically....
[06:21] <endlessguitar> Sorry I am newbie
[06:21] <nwa|bruno> =D
[06:21] <PartisanEntity> Doctor: imagemagick doesnt seem to be able to read .pmf files
[06:21] <endlessguitar> it says
[06:21] <endlessguitar> "cd /home/daniel/Desktop/FretsOnFire/"
[06:21] <endlessguitar> no such file at directory
[06:21] <endlessguitar> or something
[06:22] <predaeus_> endlessguitar, then the directory is not called FretsOnFire but somethign different
[06:22] <Doctor> oh
[06:22] <nwa|bruno> with wich command do i stop samba??
[06:22] <predaeus_> endlessguitar, mind that linux is case sensitive in that matter
[06:22] <rockets> nwa|bruno, /etc/init.d/smb stop or something
[06:22] <preaction> nwa|bruno: sudo invoke-rc.d samba stop
[06:22] <endlessguitar> can you please remote?
[06:22] <nwa|bruno> rockets n preaction thks :)
[06:22] <Doctor> PartisanEntity: its probably a movie or GIS data then
[06:22] <soundray> CommanderCool: that repository has moved. 'hg clone http://mcentral.de/hg/~mrec/v4l-dvb-kernel' works.
[06:23] <CommanderCool> soundray: i got those repositories from the homepage now...i'll try this and address to you, if it does not work
[06:23] <CommanderCool> ah, okay
[06:23] <heroin> How do i mount a SFS harddrive?
[06:23] <Doctor> SFS?
[06:23] <CommanderCool> thx
[06:23] <Doctor> solaris...?
[06:23] <predaeus_> endlessguitar, do it yourself so you learn how to do it. do "cd ~/Desktop" then do "ls -l" then post the ouput to the pastebin please
[06:23] <dlinsky> Can somebody help me with XDMCP remoting?
[06:23] <rsfriends> hi all
[06:23] <predaeus_> endlessguitar, so we can find out what that directory is called, that you unpacked to
[06:24] <heroin> Doctor: yes SFS
[06:24] <soundray> heroin: can you try mounting it with -t ntfs pls
[06:24] <heroin> Doctor: not sure.. i have a harddrive w. sfs file system
[06:24] <endlessguitar> :S I really dont understand I guess You think Im newbie sorry :S is it just easier you remote ? please..
[06:24] <predaeus_> endlessguitar, the "~" is a shortcut for your home directory so "/home/daniel" is the same as "~" if you are logged in as daniel
[06:24] <Doctor> heroin: but you dont know what SFS means or where its from?
[06:24] <heroin> soundray: i have it mounted w. ntfs but that disables me from writing to it.. so i want to use ntfs-3f
[06:24] <endlessguitar> aha
[06:24] <endlessguitar> ok
[06:24] <heroin> Doctor: not really i know its a file system :0
[06:25] <endlessguitar> daniel/desktop/FretsOnFire/
[06:25] <skulrid> is there a way a windows virus can infect a pen drive, using it on a ubuntu system?
[06:25] <soundray> heroin: that pretty much clarifies that you don't have a SFS filesystem. It's just labelled as such.
[06:25] <soundray> heroin: have you used ntfs-3g before?
[06:25] <Doctor> skulrid: lol
[06:26] <Doctor> skulrid: if you copy virusinfected.exe to it using ubuntu, yes
[06:26] <soundray> skulrid: yes, if you share the pen drive via samba and make it read-write, a rampaging virus on Windows could infect programs on the pen drive, too.
[06:26] <heroin> soundray: yesterday at a friends house
[06:26] <Cryptid> hey my NETGEAR 614 router goes into stand by mode along with my ubuntu computer please help me out... as soon as i stop using the computer ands et some on download and go i observe that the router is also going into standby mode
[06:27] <soundray> !ntfs-3g | heroin
[06:27] <ubotu> heroin: ntfs-3g is a Linux driver which allows read/write access to NTFS partitions. Installation instructions at https://help.ubuntu.com/community/MountingWindowsPartitions
[06:27] <heroin> soundray: i mounted a NTFS harddisk for him using ntfs-3g
[06:27] <Cryptid> hey my NETGEAR 614 router goes into stand by mode along with my ubuntu computer please help me out... as soon as i stop using the computer ands et some on download and go i observe that the router is also going into standby mode
[06:27] <skulrid> Doctor, no its like, I use the druve to save a .doc file when I open it later it has the xxx.exe + autorun file inside it....
[06:27] <Pici> !repeat | Cryptid
[06:27] <ubotu> Cryptid: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. You can search https://help.ubuntu.com or http://wiki.ubuntu.com while you wait. Also see !patience
[06:27] <soundray> heroin: so do the same to your pseudo-SFS now.
[06:27] <heroin> soundray: yah that is what iam going to do now, i was just confused about the SFS
[06:27] <endlessguitar> predaues I tried
[06:27] <Cryptid> Pici: sorry i couldt see my msg the first tie\me
[06:27] <Doctor> skulrid: eeee, fix the computer that did that
[06:28] <skulrid> soundray but did this virus get into my ubuntu system and how did it move by itself to the pen drive?
[06:28] <endlessguitar> ./Daniel/desktop/fretsonfire/fretsonfire.bin
[06:28] <soundray> skulrid: only if you made it writable via the network
[06:28] <Doctor> skulrid: are you sure its the ubuntu machine that did it?
[06:28] <skulrid> not sure...
[06:28] <heroin> skulrid: u have a USB hopping virus?
[06:28] <Pici> Cryptid: Try checking the power settings, it should be in the system>preferences>screensaver then power management button.
[06:29] <predaeus_> endlessguitar, by default gnome's Desktop directory is written like "Desktop"
[06:29] <skulrid> but the drive had no virus before beeing in ubuntu
[06:29] <endlessguitar> okej
[06:29] <endlessguitar> ehhh :S
[06:29] <endlessguitar> but it dosent works why?
[06:29] <GizDrak> is it not possible to have partitions larger then 2TB
[06:29] <Doctor> skulrid: maybe those files are hidden when in windows
[06:29] <endlessguitar> can you remote please?
[06:29] <tyler_d> anyone know how to open office2007 docs in openoffice?
[06:29] <endlessguitar> easier
[06:29] <predaeus_> endlessguitar, the "." at the beginnning of your line is the current directory, you need to be in the correct directory to make this work.
[06:30] <skulrid> heroin I think so, then in windows systems it wont let me open the usb drive (only using explore) and I cant delete them there so UI use ubuntu to simply delete the files
[06:30] <wishie> should a bug be filed against linux-image-2.6.20-16-generic since it doesnt seem to contain snd-usb-audio alsa module ? 2.6.20-15-generic has it.
[06:30] <Xsylotte> question: i have installed r project, but i can't find it in applications list....help ?
[06:30] <tyler_d> nm... sorry, found it
[06:30] <soundray> GizDrak: it is. You have to set the block size accordingly
[06:30] <Cryptid> Pici: there is nothing related to it in the power settings even i tried to do that thinking it would turn out to be like widows but was of not help
[06:30] <skulrid> Doctor no I see them there. just cant delete them
[06:30] <endlessguitar> please can you write what I need to write I can tell you the directorys
[06:30] <predaeus_> endlessguitar, right click in the file browser and check if you have executable rights on Fret...Guitar.bin. if not enable them and try to double click again.
[06:30] <Doctor> skulrid: viruses are persistant, delete those two files and umount,mount the drive
[06:30] <Chore-Boy> how do i get the list of people back on the side of the window here?
[06:30] <Imitation> can anyone tell me how to open a .cdr (corel draw) file?
[06:30] <GizDrak> alright soundray I will give it a shot thanks
[06:31] <Cryptid> Does Ubuntu turn off the Ethernet card while the computer becomes idle???
[06:31] <endlessguitar> application/x-shellscript
[06:31] <endlessguitar> /home/daniel/Desktop/FretsOnFire
[06:31] <Doctor> Cryptid: ubuntu has power management options just like windows
[06:31] <endlessguitar> aha
[06:31] <pumpkinhead> Imitation: use gimp. google .cdr gimp
[06:31] <skulrid> Doctor actualy I get rid of them by deleting them on ubuntu. they just reappear after beeing on other computers. I just find odd that lots of friends are getting this files. all the same
[06:31] <endlessguitar> sorry predaeus_
[06:32] <endlessguitar> Now happen something
[06:32] <soundray> GizDrak: http://en.wikipedia.org/wiki/Ext3#Size_limits
[06:32] <endlessguitar> one window come up
[06:32] <Dimensions> Cryptid: some system turns Ethernet card when they are not connected to the internet
[06:32] <skulrid> Doctor maybe it has nothing to do with it, but I just needed to understand how could windows virus files move trhough ubuntu, infecting UBS drives...
[06:32] <endlessguitar> run in terminal ,display,cancel,run
[06:32] <GizDrak> thanks soundray will check it out
[06:32] <simplyw00x> endlessguitar: run
[06:32] <heroin> skulrid: probally USB protocol
[06:32] <endlessguitar> ok
[06:32] <Cryptid> Doctor: yes it does but it only gives option of turning off the computer totally or turning off the display,,,, nothing to do with the ether net card
[06:33] <heroin> skulrid: the U in USB is for universal
[06:33] <endlessguitar> nothing happen
[06:33] <endlessguitar> s
[06:33] <Cryptid> Dimensions: how can that be changed?
[06:33] <simplyw00x> endlessguitar: You sure?
[06:33] <joe4444> anyone know how to configure TwinView for dual displays in Feisty?  i've followed at least 3 guides and even tried my Edgy backup of xorg.conf but nothing works
[06:33] <endlessguitar> yes
[06:33] <Doctor> Cryptid: if its happening and you dont want it to, I'd blame the bios
[06:33] <Dimensions> Cryptid:  .. .have no idea ... but we have this problem with 7 new portables ...
[06:33] <skulrid> heroin but wehre in my system (ubuntu) can these files be stored or hiden?
[06:33] <simplyw00x> endlessguitar: open a terminal and type
[06:33] <simplyw00x> sh  /home/daniel/Desktop/FretsOnFire
[06:33] <PopcornAlchemist> question: I try to use openvpn with this command: sudo openvpn conf.ovpn, but it does not work. I have tryed using Openvpn in Windows and it work fine, with that same config file. Where should I star looking for errors?
[06:34] <Doctor> PopcornAlchemist: file namess, like C:\whatever
[06:34] <endlessguitar> I opened in terminal
[06:34] <wers> guys, is aysiu gone in the forums for good?
[06:34] <endlessguitar> but it dosent come up
[06:34] <endlessguitar> I took display
[06:34] <simplyw00x> endlessguitar: sh  /home/daniel/Desktop/FretsOnFire
[06:34] <endlessguitar> and in the document says it..>
[06:34] <endlessguitar> #!/bin/sh
[06:34] <endlessguitar> export LD_LIBRARY_PATH=$(dirname $0)
[06:34] <endlessguitar> exec ./FretsOnFire.bin $@
[06:35] <endlessguitar> ok
[06:35] <skulrid> Doctor is there a way to see whitch files where open on my PC today?
[06:35] <heroin> skulrid: probally ram stuff.. like hand shaking files in the USB protocol
[06:35] <endlessguitar> daniel@daniel-laptop:~$  sh  /home/daniel/Desktop/FretsOnFire/fretsonfire.bin
[06:35] <endlessguitar> sh: Can't open /home/daniel/Desktop/FretsOnFire/fretsonfire.bin
[06:35] <happytron> hi, so my sound just spontaneously stopped working.  whenever any process tries to play sound it becomes unresponsive
[06:35] <endlessguitar> :S
[06:35] <notgod> skulrid: modified, or just accessed?
[06:35] <skulrid> both if possible
[06:36] <simplyw00x> endlessguitar: That's not what I typed...
[06:36] <alesan> what is the number like "<1182270904465>" that I find in every line of messages?
[06:36] <PopcornAlchemist> Doctor, I have chanced the path inside the config file, if that i what you are referring to
[06:36] <endlessguitar> I typed that you wrote
[06:36] <Doctor> ah
[06:36] <endlessguitar> but nothing happened too
[06:36] <Chore-Boy> nobody is in the #winehq channel.... im trying to get wine to work with diabloII, i installed to /home/bill/diabloII and when i try to start the game, the cd just spinns up and keeps spinning forever, it wont even let me unmount the thing, or shut down, keeps saying "device busy"
[06:36] <endlessguitar> just when I clicked enter did not something happens
[06:37] <simplyw00x> endlessguitar: well it's more helpful if you acutally post the results of the commands I post ;)
[06:37] <Chore-Boy> i tried mounting an iso of the cdrom, and that wont work either...
[06:37] <endlessguitar> :S
[06:37] <endlessguitar> can you remote please?
[06:37] <heroin> Chore-Boy: i have D2 working
[06:37] <skulrid> notgod u know how?
[06:37] <endlessguitar> should be 100 % easier
[06:37] <Chore-Boy> omg you do?
[06:37] <Xsylotte> or even better...
[06:37] <Chore-Boy> did you have the same problem with it?
[06:37] <simplyw00x> endlessguitar: sh me/daniel/Desktop/FretsOnFire/FretsOnFire
[06:37] <simplyw00x> sigh
[06:37] <notgod> skulrid: man find, look at the parts about mtime/atime
[06:37] <simplyw00x> *sh /home
[06:37] <notgod> skulrid: do you know how to use find?
[06:37] <endlessguitar> ok I try
[06:37] <Xsylotte> i need statistical package with i can do all statistical calcutaions and graphs...charts..etc...
[06:37] <simplyw00x> It is very easy
[06:37] <simplyw00x> you're just ignoring the instructions...
[06:38] <endlessguitar> daniel@daniel-laptop:~$ sh me/daniel/Desktop/FretsOnFire/FretsOnFire
[06:38] <endlessguitar> sh: Can't open me/daniel/Desktop/FretsOnFire/FretsOnFire
[06:38] <skulrid> notgod not at all :)
[06:38] <heroin> Chore-Boy: did u succesfully install diablo2?
[06:38] <happytron> is there a way to find all the processes that might be hogging the sound so i can kill them?
[06:38] <simplyw00x> endlessguitar: I corrected it
[06:38] <SteveBallmer> Xsylotte: Have you tried Microsoft Excel?
[06:38] <simplyw00x> sh /home/daniel/Desktop/FretsOnFire/FretsOnFire
[06:38] <endlessguitar> ok
[06:38] <Chore-Boy> yeah, everythign went fine, just wont find the cdrom, keeps saying "inser the cd"
[06:38] <lorena> ola sy lorenaaa
[06:38] <simplyw00x> endlessguitar: sh /home/daniel/Desktop/FretsOnFire/FretsOnFire
[06:38] <notgod> Xsylotte: OpenOffice->Spreadsheet? :)
[06:38] <Xsylotte> SteveBallmer, very funny.
[06:38] <endlessguitar> now it says
[06:38] <endlessguitar> daniel@daniel-laptop:~$  sh /home/daniel/Desktop/FretsOnFire/FretsOnFire
[06:38] <endlessguitar> exec: 3: ./FretsOnFire.bin: not found
[06:39] <lorena> ablarme en espaol
[06:39] <Chore-Boy> it did the same thing a million times when i was trying to install, but i mounted the iso and it installed from taht
[06:39] <Doctor> omg you broke it :D
[06:39] <Doctor> !es
[06:39] <ubotu> Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[06:39] <endlessguitar> what is that supposted 2 mean?
[06:39] <lorena> noooooooooooooooooooooo
[06:39] <simplyw00x> endlessguitar: it means, how the hell did you install frets on fire?
[06:39] <Chore-Boy> is there a special command i need to put in the config file to get past copyright protection?
[06:39] <karmic> hey guys, i have a lenovo t60, and if i enable desktop effects, my screen turns white, any ideas?
[06:39] <heroin> Chore-Boy: ok start a sentence w. someones name please..
[06:39] <Chore-Boy> with a mounted iso
[06:39] <SteveBallmer> Xsylotte: Microsoft supports Microsoft Excel 2000 on Linux by allowing WINE to exist.
[06:39] <soundray> !info r-base | Xsylotte, this is the best
[06:39] <ubotu> xsylotte, this is the best: r-base: GNU R statistical computing language and environment. In component universe, is optional. Version 2.4.1-1 (feisty), package size 23 kB, installed size 56 kB
[06:39] <notgod> skulrid: "find /path/to/my/files -mtime 1" will show you all the files modified in the past day inside the specified directory. atime shows you the access time.
[06:39] <Chore-Boy> heroin: k
[06:39] <magnetron> Chore-Boy: http://appdb.winehq.org/appview.php?iVersionId=49
[06:39] <Xsylotte> i have r-base but it isn't gui.
[06:39] <simplyw00x> endlessguitar: Because FretsOnFire should be in the same folder as fretsonfire.bin
[06:40] <newtubuntu> Paddy_EIRE, I'M BACK :-)
[06:40] <heroin> Chore-Boy: how i did it was copy a installed Diablo2 from windows 2 linux > import registry stuff, then did a nocd-key patch
[06:40] <newtubuntu> and this time, from my brand new, dual boot system
[06:40] <soundray> Xsylotte: gnumeric then
[06:40] <skulrid> notgod ill try
[06:40] <newtubuntu> both Ubuntu and Vista boot properly, installation was almost flawless. I'm impressed.
[06:40] <Xsylotte> i will figure something out..
[06:40] <Xsylotte> bbl
[06:40] <SteveBallmer> heroin: You'd be better off dual booting.
[06:40] <heroin> SteveBallmer: not really
[06:41] <Chore-Boy> heroin: so youre using the d2loader?
[06:41] <soundray> Xsylotte: btw, you can get GNU R with a GUI as well
[06:41] <Xsylotte> how soundray  ?
[06:41] <SteveBallmer> newtubuntu: You should be impressed with Debian, then. Or GRUB.
[06:41] <heroin> Chore-Boy: not sure, but i could b..
[06:41] <heroin> Chore-Boy: just any nocd will work
[06:42] <skulrid> notgod I just saved a .doc file minutes ago and it does not appear in that log
[06:42] <endlessguitar> the file is in the same folder as the fretsonfire
[06:42] <simplyw00x> SteveBallmer: Did he say he wasn't?
[06:42] <Chore-Boy> heroin: only reason i never use the d2loader anymore, is supposedly you can get your cd-key banned....
[06:43] <Chore-Boy> heroin: never got banned using it before in previous versions of diablo though.....
[06:43] <simplyw00x> endlessguitar: cd /home/daniel/Desktop/FretsOnFire && ./FretsOnFire
[06:43] <cute_bettong> anyone know if you can use mozilla thunderbird to check your gmail?
[06:43] <sebrock> how can I get a remote systems hostname with a command?
[06:43] <Chore-Boy> heroin: ill try the d2loader....
[06:43] <WaxyFresh> how do i tell how many colors my card/monitor can display?
[06:43] <notgod> skulrid: try +1
[06:43] <heroin> Chore-Boy: i always play offline anyway :)
[06:43] <newtubuntu> how can I get Ubuntu to recognize my graphic card ? It's a basic/standard Intel VGA card (nVidia I think but nothing poweful or fancy)
[06:43] <magnetron> Chore-Boy: http://www.poksi.org/%7Ehifi/lnxd2load/D2Loader-current.sh
[06:43] <Chore-Boy> heroin: aww thats no fun
[06:43] <endlessguitar> daniel@daniel-laptop:~$ cd /home/daniel/Desktop/FretsOnFire && ./FretsOnFire
[06:43] <endlessguitar> exec: 3: ./FretsOnFire.bin: not found
[06:43] <endlessguitar> daniel@daniel-laptop:~/Desktop/FretsOnFire$
[06:43] <Chore-Boy> magnetron: thx
[06:43] <soundray> Xsylotte: I can't remember, sorry
[06:43] <endlessguitar> and now?
[06:43] <GizDrak> is there a GUI out there for LVM by chance?
[06:44] <Paddy_EIRE> newtubuntu, did the graphics work out
[06:44] <magnetron> Chore-Boy: i found it on http://appdb.winehq.org/appview.php?iVersionId=49
[06:44] <heroin> Chore-Boy: well i play it with some mates via direct IP connect but iam level 30ish and then i just dont feel like finishing act V ever..
[06:44] <Paddy_EIRE> newtubuntu, oh I see your message
[06:44] <newtubuntu> Paddy_EIRE, I wrote you a message when I walked in the room
[06:44] <soundray> Xsylotte: you might ask in #r
[06:44] <simplyw00x> endlessguitar: ls
[06:44] <newtubuntu> I am back from my installed Ubuntu
[06:44] <Xsylotte> so little users :D
[06:44] <Chore-Boy> heroin: LOL im a godly d2 master wizard guru
[06:44] <bullgard4> i2cdetect -l does not output anything. Is it correct to conclude that this computer does not have any i2c busses?
[06:44] <endlessguitar> ok
[06:44] <newtubuntu> it works fine and Vista still boots
[06:44] <Xsylotte> asked..
[06:44] <simplyw00x> endlessguitar: because something is not right in terms of what files there are there
[06:45] <endlessguitar> and now?
[06:45] <endlessguitar> now come one list up
[06:45] <endlessguitar> with loads of files
[06:45] <Chore-Boy> been playin diablo for yearssssss
[06:45] <Paddy_EIRE> Have you tried looking in the restricted drivers manager in System > Administration
[06:45] <soundray> Xsylotte: how long have you waited for a reply?
[06:45] <NetGod> newtubuntu: Wait until you try to activate Ubuntu so you can use Windows Update.
[06:45] <simplyw00x> endlessguitar: yup. Which ones are green?
[06:45] <Xsylotte> soundray, i got answer but i didn't like it :D
[06:45] <Xsylotte> haven't asked for r gui..or have..don't remember.
[06:45] <Xsylotte> brb
[06:46] <endlessguitar> http://paste.ubuntu-nl.org/26286/
[06:46] <endlessguitar> erm..
[06:46] <heroin> Chore-Boy: urm.. im a level 30 pala and i had a level 24 sourc.. but i just suck at d2.. its just loads of fun
[06:46] <NetGod> Typical gamer...
[06:46] <heroin> NetGod:  who?
[06:46] <endlessguitar> FretsOnFire     FretsOnFire.bin ,libamanith.so.1  copying.txt  ,_amanith.so
[06:46] <simplyw00x> endlessguitar: did you rename FretsOnFire.bin from something?
[06:46] <Chore-Boy> heroin: you just have to play online, diablo2 single player is like, THE hardest game ive ever played
[06:46] <newtubuntu> NetGod:  what do you mean ?
[06:47] <WaxyFresh> is there a way to tell how many colors my graphics card can support?
[06:47] <endlessguitar> no :S
[06:47] <Doctor> has anyone gotten a Draft N card to work on thier laptop?
[06:47] <endlessguitar> just extracted
[06:47] <endlessguitar> ^
[06:47] <NetGod> You probably have a program that lets you play your game 24/7 without leaving your chair.
[06:47] <Cryptid> MY NETGEAR Router goes into standby mode along with Ubuntu please help me out,.
[06:47] <wols> Chore-Boy: D2 SP is dead easy
[06:47] <Chore-Boy> heroin: ive got a lvl 94 pally.... hes pretty cool....
[06:47] <heroin> Chore-Boy: u have not expiernces Ultima Online
[06:47] <Doctor> WaxyFresh: shoud be 24 or 32 these days :)
[06:47] <Doctor> bit i mean
[06:47] <endlessguitar> I just exracted the whole folder to desktop
[06:47] <simplyw00x> ok
[06:47] <heroin> Chore-Boy: 94.. jesus.. but yah we have to stay ontopic on jout #ubuntu-chat
[06:47] <wols> WaxyFresh: what card is it? if it was made in the last 10 years: 16Mio colors
[06:47] <heroin> j #ubuntu-chat
[06:47] <Chore-Boy> heroin: pay to play... meh, ive seen my friend play ultima though, it looks REALLY cool... a lot cooler than most mmo's ive seen, every try anarchy online?
[06:47] <Paddy_EIRE> newtubuntu, what was the output of lspci again... use ubuntu pastebin
[06:47] <SAM_theman> !vmware
[06:47] <ubotu> VMWare Player is in Ubuntu's !Multiverse repository (package "vmware-player"), and http://www.easyvmx.com/easyvmx.shtml can create VMs for it. For VMWare Server, instructions can be found at https://help.ubuntu.com/community/VMware - See also !virtualizers
[06:48] <Doctor> Cryptid: what do you mean your router goes into standby?
[06:48] <simplyw00x> endlessguitar: and youre saying that ./FretsOnFire does nothing?
[06:48] <Chore-Boy> heroin: oh yeah... on-topic.. sorry
[06:48] <WaxyFresh> wols thanks
[06:48] <heroin> Chore-Boy: but yah the nocd key should do the trick
[06:48] <WaxyFresh> wols: ^
[06:48] <NetGod> Great, with VMware player you can run Ubuntu on top of Ubuntu. That must be really fun.
[06:49] <Cryptid> Doctor: all the downloads stop and the test light on the router comes on Azureus quits the download saying it lost connection with 192.168.1.1 which is the router LAN IP address
[06:49] <Doctor> NetGod: whats funny is when you load a VM that uses a vm for something :)
[06:49] <endlessguitar> when I open the file  come the window up with 4 altenativs,  run in terminal,display,cancel,run
[06:49] <Chore-Boy> magnetron: this file you linked me to, looks like a lot more work than d2loader, have you ever used d2loader? loads it without cd, i may try that instead, ill keep this file in mind if all else fails...
[06:49] <lorena> welcomeee
[06:49] <simplyw00x> no
[06:49] <simplyw00x> not open it
[06:49] <shanlot751> sorry, worng one
[06:49] <simplyw00x> type what I said
[06:49] <lorena> my name is lorena
[06:49] <simplyw00x> in a terminal
[06:49] <simplyw00x> open a terminal
[06:49] <simplyw00x> yourself
[06:49] <simplyw00x> and type into it
[06:49] <NetGod> Hmm, I feel like trolling.
[06:49] <newtubuntu> OK, I found it, I'm downloading a package now. Never been here, never done that. But it feels very exciting ;-)
[06:49] <simplyw00x> ./FretsOnFire
[06:50] <Doctor> Cryptid: interesting, could be router crashing :D
[06:50] <lorena> 16 years olddd
[06:50] <simplyw00x> endlessguitar: Got it?
[06:50] <DarlMcBride> I should register this nickname.
[06:50] <endlessguitar> when I open the file Fretsonfire
[06:50] <simplyw00x> no
[06:50] <simplyw00x> don't open it
[06:50] <lorena> weee
[06:50] <magnetron> Chore-Boy: read that Appdb page i linked you too. this thing is replacement that is much better than d2loader
[06:50] <lorena> msn?
[06:50] <simplyw00x> for christ's sake
[06:50] <endlessguitar> come the 4 altenativs up
[06:50] <DarlMcBride> Muahahha
[06:50] <endlessguitar> I siad
[06:50] <endlessguitar> "siad
[06:50] <Doctor> click click boooom
[06:50] <endlessguitar> said"
[06:51] <simplyw00x> endlessguitar: DON'T OPEN IT. Sigh. Open *a terminal*
[06:51] <lorena> olaaaaaa
[06:51] <Chore-Boy> magnetron: ok, actually, now that i'm reading thru the file it says not to edit anything in it, so thats good lol
[06:51] <simplyw00x> endlessguitar: And type into the terminal
[06:51] <Doctor> lorena: why are you in a linux nerd room looking for people to talk to on msn?
[06:51] <Cryptid> Doctor:  its not intresting it irritating
[06:51] <Paddy_EIRE> lorena, no harm but this aint a chat room, its a tech support channel
[06:51] <lorena> ok
[06:51] <DarlMcBride> Pay your $350 SCO fee, and your 200 Microsoft patent violations.
[06:51] <lorena> ok
[06:51] <lorena> si
[06:51] <lorena> tengo msn
[06:51] <endlessguitar> ok
[06:51] <lorena> lo kieres
[06:51] <lorena> ?
[06:51] <natbet> does anyone know of a timeclock or a punchclock program for ubuntu?
[06:51] <simplyw00x> endlessguitar: cd /home/daniel/Desktop/FretsOnFire && ./FretsOnFire
[06:51] <simplyw00x> endlessguitar: Then tell me what the problem with that ius
[06:52] <k0d3r> Hi All!
[06:52] <Doctor> Cryptid: hehehe well usually routers dont crash so easily
[06:52] <endlessguitar> now it says:
[06:52] <endlessguitar> daniel@daniel-laptop:~$  cd /home/daniel/Desktop/FretsOnFire && ./FretsOnFire
[06:52] <endlessguitar> exec: 3: ./FretsOnFire.bin: not found
[06:52] <endlessguitar> daniel@daniel-laptop:~/Desktop/FretsOnFire$
[06:52] <aldarsior> there's no way to dd and compress on the fly is there?
[06:52] <lorena> doctor
[06:52] <lorena> kieres mi msn?
[06:52] <Doctor> aldarsior: dd if= | compress > somewhere
[06:52] <lorena> yessss
[06:52] <lorena> doctor yes
[06:53] <Doctor> i dont speaka da spanish
[06:53] <heroin> lol Doctor
[06:53] <lorena> spanish
[06:53] <lorena> yesss
[06:53] <newtubuntu> Paddy_EIRE, please join #Paddy_EIRE
[06:53] <simplyw00x> endlessguitar: Which means that you claiming to have 'just extracted' it is a gigantic lie
[06:53] <Doctor> no hable espanioul ;_;
[06:53] <heroin> no hablo espanol, pero me gustan las chicas muy guapas
[06:53] <Paddy_EIRE> could everyone stop filling the room with garbage
[06:53] <Doctor> Paddy_EIRE: no
[06:53] <DarlMcBride> Ubuntu is going to get sued into oblivion because Mark Shuttleworth is too stupid to partner with Microsoft or SCO. All the Ubuntu users will be sued too point that they'll have to back over the border.
[06:53] <endlessguitar> ok.
[06:53] <simplyw00x> endlessguitar: Try extracting it again
[06:54] <endlessguitar>  ok
[06:54] <mezziah> heroin: que chicas guapas? no puedo encontrar unas
[06:54] <Paddy_EIRE> could someone kick Doctor and lorena
[06:54] <heroin> DarlMcBride: please take a chill people.. or have some hasj
[06:54] <lorena> si puedes encontrar algunas yo sy una de eellas
[06:54] <heroin> mezziah: me gustan chicas con grandes boobs
[06:54] <mezziah> man now i think i'm in the spanish channel
[06:54] <lorena> jajajajaajaj
[06:54] <SecrethX> someone knows a SWF decompiler?
[06:54] <mezziah> heroin: haha
[06:54] <heroin> jejejeje
[06:54] <lorena> yo lorena
[06:54] <lorena> soy de espaa
[06:54] <tyranos> hello everyone
[06:54] <imitation> endlessguitar: try sh .FretsOnFire
[06:54] <Doctor> !op Paddy_EIRE wants me kicked for asking a spanish person why they're here
[06:54] <DarlMcBride> lorena: Type /part #ubuntu
[06:54] <endlessguitar> ok
[06:54] <simplyw00x> imitation: We've tried that
[06:54] <aldarsior> Doctor: can I do that with gzip instead?
[06:55] <Doctor> oh, thats a debian command
[06:55] <imitation> sry
[06:55] <aldarsior> or bzip
[06:55] <endlessguitar> says cant open
[06:55] <lorena> darlMcBRIDE
[06:55] <lorena> TIENES MSN
[06:55] <endlessguitar> but I redownloaded it
[06:55] <lorena> ?
[06:55] <endlessguitar> :P
[06:55] <SecrethX> someone knows a SWF decompiler?
[06:55] <DarlMcBride> Take your ****ing Spanish elsewhere.
[06:55] <endlessguitar> take some mins
[06:55] <heroin> lorena: tengo msn..
[06:55] <endlessguitar> :S
[06:55] <lorena> damelo
[06:55] <lorena> y te grego
[06:55] <heroin> lorena: pero mi espanol es muy crappy
[06:55] <Doctor> aldarsior: aye you can
[06:55] <sarah> drogen an die macht!!
[06:55] <Hobbsee> !es
[06:55] <ubotu> Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[06:55] <Hobbsee> !de
[06:55] <lorena> no pasa nada
[06:55] <ubotu> Deutschsprachige Hilfe fuer Probleme mit Ubuntu, Kubuntu und Edubuntu finden Sie in den Kanaelen #ubuntu-de, #kubuntu-de, #xubuntu-de und #edubuntu-de
[06:55] <lorena> io
[06:55] <Doctor> !ops maybe
[06:55] <ubotu> Sorry, I don't know anything about ops maybe - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[06:55] <Pici> !language | DarlMcBride
[06:55] <ubotu> DarlMcBride: Please watch your language and keep this channel family friendly.
[06:55] <heroin> !nl
[06:55] <ubotu> Nederlandstalige ondersteuning voor Ubuntu (en vers gezette koffie) is te vinden in #ubuntu-nl
[06:55] <imitation> sarah: ??
[06:55] <tyranos> i need to mount a directory   to another , mount --bind oldir newdir , but  i can only do it as root what should i do to it as a user
[06:55] <DarlMcBride> I didn't use any language.
[06:56] <sarah> drogen an die macht!!!!!!!!!!!
[06:56] <tyranos> as changing the permissions aftter sudo --bind doesnt change anything
[06:56] <mezziah> sarah wtf?
[06:56] <jose_15> ola wapisimas
[06:56] <lorena> ola
[06:56] <lorena> jose
[06:56] <Doctor> aldarsior: need example syntax?
[06:56] <wols> sarah: stop this
[06:56] <simplyw00x> /afk
[06:56] <lorena> de onde ers
[06:56] <lorena> wapo
[06:56] <DarlMcBride> Haha.
[06:56] <endlessguitar> suck" 21% :S
[06:56] <ZeroA4> !es | lorena
[06:56] <ubotu> lorena: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[06:56] <richdurhm> hey guys how to i use remote desktop to view and control a friends desktop
[06:56] <mezziah> lorena: pero conocis el canal espanol, no?
[06:56] <heroin> richdurhm: use vnc
[06:57] <wols> richdurhm: the remote windows or ubuntu?
[06:57] <SecrethX> someone knows a SWF decompiler?
[06:57] <richdurhm> ubuntu
[06:57] <richdurhm> someone elses comp
[06:57] <wols> then use vnc or remote X or such
[06:57] <predaeus_> Hobbsee, I think you've got jose_15 by mistake, looked like his/her first message
[06:57] <Hobbsee> predaeus_: not sure if they're the same person
[06:58] <tyranos>  i need to mount a directory   to another , mount --bind oldir newdir , but  i can only do it as root what should i do to it as a user
[06:58] <Xsylotte> help: Nautilus can't be used now, due to an unexpected error from Bonobo when attempting to locate the factory.Killing bonobo-activation-server and restarting Nautilus may help fix the problem
[06:58] <Paddy_EIRE> !whois
[06:58] <ubotu> Sorry, I don't know anything about whois - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[06:58] <predaeus_> Hobbsee, nm, thanks for stopping them
[06:58] <eljak> richdurhm: remote windows or linux?
[06:58] <afroswiffel> ubuntu newbie here. ive downloaded true crypt. how do i run it? where is it. i never no where my progs go when i dwnload
[06:58] <WaxyFresh> im trying to copy all the files from the folder im curnently in to /etc/splashy/themes how do i do this?
[06:58] <richdurhm> linux
[06:59] <lorena> doctorrr
[06:59] <lorena> jose de donde eres
[06:59] <Doctor> WaxyFresh: in terminal?
[06:59] <heroin> WaxyFresh: cp *.* /etc/splashy/themes
[06:59] <afroswiffel> ive installed but dont know how to run. any help?
[06:59] <tyranos> plz help
[06:59] <tyranos>  i need to mount a directory   to another , mount --bind oldir newdir , but  i can only do it as root what should i do to it as a user
[07:00] <Glich> hi?
[07:00] <Doctor> tyranos: you need root access at some point to mount things, what are you trying to accomplish?
[07:00] <predaeus_> tyranos, use sudo infront of the command to execute with root rights
[07:00] <magnetron> tyranos: you need to use "sudo"
[07:00] <digitalbc> if i have 2 ubuntu systems how can I get a full gnome session when i connect remotely?
[07:00] <endlessguitar> simplyw00x
[07:00] <South01> hi, are there any programs to get or send sms from my phone, using bluetooth
[07:00] <Glich> This is my first time on ubuntu!
[07:00] <tyranos> magnetron i m trying to replace my existing psptoolchain with an older one from my backup
[07:00] <endlessguitar> another thing I need help me with :S
[07:00] <endlessguitar> still downloading the file..
[07:01] <Glich> :)
[07:01] <wols> South01: wammu/gammu
[07:01] <endlessguitar> how does the tv out works? in linux
[07:01] <ahmed> hi everybody
[07:01] <endlessguitar> what need I to do for play the videos in tv?
[07:01] <eljak> richdurhm: you need to enable desktop sharing on the remote desktop and on you machine use a client like krdc
[07:01] <endlessguitar> I got nvidia 7600
[07:01] <tyranos> doctor if i do it with sudo i cant change the rights afterward , it works but doesnt affect the files
[07:01] <ahmed> I have a mouse problem with my ubuntu feisty
[07:01] <endlessguitar> and I have installed the drivers in linux
[07:01] <richdurhm> ya
[07:01] <digitalbc> anyone use bluetooth or have dual monitors running?
[07:02] <Doctor> tyranos: what are you trying to do?
[07:02] <ahmed> it works for few minutes and after all usb port are blocked
[07:02] <afroswiffel> how do i run a program ive installed in ubuntu?  i kepp losing my connection so can someone tell me quickly plz
[07:02] <endlessguitar> ok I have extract the files
[07:02] <endlessguitar> fretsonfire
[07:02] <endlessguitar> what need I to do now?
[07:02] <digitalbc> afroswiffel, did you use synaptic ?
[07:02] <imitation> sry for asking again, but gimp doesn't do the vector format .cdr.   What app can i use for converting or viewing corel draw files?
[07:03] <afroswiffel> no.
[07:03] <digitalbc> afroswiffel, did you install via source?
[07:03] <afroswiffel> but i installed but dont know where to un it
[07:03] <afroswiffel> yes i think
[07:03] <ahmed> are there bugs on feisty related with usb mouses
[07:03] <digitalbc> it's probably in /usr/local/bin
[07:03] <afroswiffel> how do i run it though
[07:03] <South01> wols : what that
[07:03] <digitalbc> type /usr/local/bin/<program name>
[07:03] <Chore-Boy> magnetron: i downloaded the d2 1.11b patch from battle.net, but when i try to patch my game, it say s i have the wrong version
[07:03] <Doctor> ahmed: not usually, could be mobo, bios problem
[07:03] <afroswiffel> i can find it . but dont know what command to ru un it in terminal
[07:04] <afroswiffel> do i do bash or sh or something
[07:04] <hroo772> im running fiesty as the host and windows xp as the guest in vmware, is there a way to give vmware as much resources and priority as possibly
[07:04] <magnetron> Chore-Boy: i just gave you the link, don't ask me
[07:04] <ahmed> no I don't think so cause it worked perfectly with ubuntu dapper
[07:04] <CommanderCool> when i try to use xine to view dvb it says that there is no input-plugin
[07:04] <Doctor> Chore-Boy: maybe you got wrong patch? :D
[07:04] <digitalbc> if you are in terminal go to /usr/local/bin
[07:04] <digitalbc> then type the name of the command
[07:04] <MrKeuner> hi, I have installed fetchmail and set up a fetchmail conf file. It works when I run fetchmail. However, I could not find out what is the default polling frequency for fetchmail packaged by ubuntu
[07:04] <digitalbc> you may not even have to cd
[07:04] <arnofly> slt
[07:04] <Chore-Boy> doctor: im pretty sure its the right patch...
[07:04] <tyranos> doctor , i want to mount a directory to another  /media/hdba/pspdev to /usr/local/pspdev  but as a user because i want to be able to run the executables in it as a user
[07:05] <afroswiffel> ok thanks for help guyss
[07:05] <richdurhm> i cannot get this thing working
[07:06] <tyranos> i m trying to replace my new toolchain for the psp with one from my backup , but when i mount it with sudo i cant execute the bin folder as a user
[07:06] <jintxo> MrKeuner, not sure if there is a default poll interval in ubuntu, I just used to run it in a crontab
[07:06] <South01> can i use two monitor just like inxp
[07:06] <tyranos> doctor : i m trying to replace my new toolchain for the psp with one from my backup , but when i mount it with sudo i cant execute the bin folder as a user
[07:07] <CommanderCool> when i try to use xine to view dvb it says that there is no input-plugin
[07:07] <ahmed> doctor : can you help me pls?
[07:07] <heroin> tyranos: u have any cool apps or stuff for psp?
[07:07] <richdurhm> eljak,  CAN I USE REMOTE DESKTOP?
[07:08] <richdurhm> oops caps
[07:08] <MrKeuner> jintxo: OK thanks, that was what I thought as well
[07:08] <MrKeuner> jintxo: there is a /etc/init.d/fetchmail though
[07:08] <tyranos> heroin : yeah i m trying to recompile one and make it compatible with my infrared keyboard
[07:08] <Doctor> tyranos: /dev/hdb1 is fat32?
[07:08] <MrKeuner> jintxo: which makes me think that it is installed as a service
[07:08] <ahmed> it's really annoying to use ubuntu without mouse, but it works perfectly on windows
[07:09] <MrKeuner> jintxo: which might have a polling interval
[07:09] <heroin> tyranos: i have a converted psp... but no cool homebrew
[07:09] <jintxo> MrKeuner, I'd think the same too but I don't use fetchmail any more so I don't have it installed now
[07:09] <ahmed> so no solution?
[07:09] <tyranos> Doctor : is the only ntfs partition i habe :(,
[07:09] <eljak> richdurhm: yes of course thats how i work?
[07:09] <Doctor> tyranos: try adding "-o uid=1000" to it
[07:09] <tyranos> doctor in the fstab ?
[07:09] <Doctor> ahmed: thats a non obvious problem
[07:10] <Doctor> tyranos: mount it somewhere, doesn't matter and make a link to the directory
[07:11] <eljak> richdurhm: to connect you enter something like vnc:/ip_address , ip_address = address of the remote machine
[07:11] <mortuis99> will ubuntu allow you to have an extended desktop(with 2 monitors) like xp used to?
[07:11] <kristy> OLA
[07:11] <South01> hi
[07:11] <wols> mortuis99: yes
[07:11] <South01> can i use bluetooth with ubuntu
[07:11] <cratel> what port does the ubuntu automatic updater use?
[07:11] <wols> mortuis99: xinerama for example
[07:11] <kristy> ESO K ES BURUNDI O KE
[07:11] <ahmed> really but I'm sure that it's a feisty bug
[07:11] <richdurhm> eljak i use ssh then ip
[07:11] <Doctor> tyranos: ln -s /media/hdb1/whatever /home/you/psp/whatever
[07:11] <ahmed> and I can't find any help
[07:11] <kristy> ARRIBA ESPAAAAAAAAAAAAAAAAAAAAA
[07:11] <wols> cratel: it's a webclient
[07:12] <ahmed> anyway thanks for all
[07:12] <richdurhm> eljak,  then another ip similar to his pops up but says needs a password but he did not make one
[07:13] <eljak> richdurhm: yes you should enter same password on both machines
[07:13] <richdurhm> ya ut i don't think he created one
[07:13] <whtet> how do i probe nic card on ubuntu?
[07:13] <mc44> !away > Harwod
[07:13] <mortuis99> cool thanks wols
[07:14] <Harwod> mc44 sorry-me
[07:14] <cratel> wols: so that means it uses port 80?
[07:14] <Chore-Boy> doctor: yeah, im retarded and downloaded the patch for non-expansion diablo... lol wow
[07:14] <eljak> there should pop a dialog on his machine that says someone is trying to connect to your machine allow it or not something like that
[07:14] <Doctor> :D
[07:14] <kouji> Hello how do I install kubuntu in ubuntu without the KDE application showing in gnome menu
[07:14] <Chore-Boy> wow, cant believe after 6 years of playin diablo... i do somethin stupid like that
[07:14] <wols> cratel: possibly 443. you can use netstat to check
[07:15] <neverblue> kouji, this KDE app?
[07:15] <neverblue> which KDE app?*
[07:15] <sarah> Hallo!!!!!!!
[07:15] <natbet> i've removed vmware-player but it is still in the init.d folder and starts at boot, how do I get rid of it? do I edit inittab?
[07:15] <Doctor> neverblue: probably all of them :D
[07:16] <Paddy_EIRE> sarah, whats the problem
[07:16] <neverblue> Doctor, you see where this is going :)
[07:16] <kouji> all Kde apps....if I I install kubuntu alongside ubuntu then kde apps show in gnome menu, and gnome apps show in KDE menu.....how do I avoid that
[07:16] <wols> neverblue: no. purge it
[07:16] <sarah> nix
[07:16] <neverblue> wols?
[07:16] <sarah> wollt nur hallo sagen
[07:16] <wols> should have been natbet:
[07:16] <neverblue> why are you telling me something wols?
[07:16] <neverblue> ah
[07:16] <Paddy_EIRE> !de |
[07:16] <ubotu> : Deutschsprachige Hilfe fuer Probleme mit Ubuntu, Kubuntu und Edubuntu finden Sie in den Kanaelen #ubuntu-de, #kubuntu-de, #xubuntu-de und #edubuntu-de
[07:16] <wols> sarah: stop that. english only
[07:16] <neverblue> kouji, why would you want to
[07:16] <sarah> ok
[07:17] <neverblue> kouji, all apps for KDE work in Gnome, and vice versa
[07:17] <South01> are there any site that shows the top 10 downloads for ubuntu?
[07:17] <natbet> wols: how do you purge it?
[07:17] <sarah> helllo!!!!!!!!!
[07:17] <frank__> hey
[07:17] <natbet> just remove the file from init.d?
[07:17] <neverblue> and since they are installed on your system, its obvious that you would want access to them in your menu
[07:17] <Dr_willis> South01,  top 10 downloads of what?
[07:17] <frank__> i have a problem getting my wd passport (160gb) usb drive to work
[07:17] <South01> top 10 programs for ubuntu
[07:17] <South01> to download
[07:17] <kouji> because it makes the menus messy and disorganized and there are multiple apps for the same thing (kate/gedit for example)
[07:17] <wols> neverblue: read apt.get manual
[07:18] <Quanorde> I'm trying to get my wireless working, can anyone assist? To get Feisty 7.04 set up with wireless, I removed WEP key from my network- and my wireless does see the SSID, but when I try to connect to it, it just times out.
[07:18] <frank__> what am i doing wrong? (i plug it in) *g*
[07:18] <neverblue> kouji, you can organize your menu
[07:18] <wols> neverblue: read apt-get manual
[07:18] <kouji> ofcourse I I want to use both apps on either distro
[07:18] <Paddy_EIRE> sarah, I already asked you what the problem was
[07:18] <neverblue> wols, stop talking to me
[07:18] <sarah> nothing
[07:18] <natbet> ok, thanks
[07:18] <neverblue> kouji, i dont think 'removing' the programs is your solution
[07:18] <frank__> i have one :D
[07:18] <wols> South01: the most downlaoded deb package is libc6. everyone needs it
[07:18] <rhalff> South01: linux works different, you decide what you need, then you search..
[07:18] <Paddy_EIRE> sarah, so your just being annoying
[07:19] <neverblue> kouji, you want to organize your menu, right click on the applications button, then select 'Edit Menus'
[07:19] <Doctor> eeeeee
[07:19] <sarah> ick nit sprecken eure sprache^^
[07:19] <Doctor> FSF recommends realtek wireless cards -_-
[07:19] <Glich> Hi all!
[07:19] <Paddy_EIRE> could an op please KICK sarah
[07:19] <neverblue> Paddy_EIRE, /ignore works fine
[07:19] <sarah> sry
[07:19] <rhalff> don't kick girls, they are rare! :p
[07:20] <sarah> ^^
[07:20] <Paddy_EIRE> neverblue, like so /ignore sarah
[07:20] <Quanorde> Then help this girl. T_T I'm so confused.
[07:20] <wols> rhalff: bad girls must be spanked. sarah is a bad girl
[07:20] <neverblue> matters the client
[07:20] <sarah> sorry!!!
[07:20] <sarah> yeah
[07:20] <sarah> ^^
[07:20] <Paddy_EIRE> neverblue, xchat
[07:20] <wols> and in reality is probably a 180kg male witha beer belly
[07:20] <frank__> LOL
[07:20] <neverblue> on xchat, use /ignore *!*@dslb-088-065-215-125.pools.arcor-ip.net all
[07:20] <sarah> haha
[07:20] <neverblue> that will entirely block sarah
[07:21] <neverblue> fact I might even do it myself :)
[07:21] <Reed_> hello
[07:21] <sarah> lololooo
[07:21] <djm62> excuse me, could anyone tell me any way at all to block all images by default when using epiphany - I'm being charged by the bit so I'd rather only view some of them
[07:22] <Paddy_EIRE> djm62, you are charged by the bit!
[07:22] <rhalff> djm62: tried preferences yet ? and why not use lynx or links then
[07:22] <frank__> i need support getting my usb hdd to work, can anyone help me please?
[07:22] <gRaCiOsO> how could i put a script at the start of my ubuntu?
[07:22] <disinterested> that would suck
[07:22] <Quanorde> Anyone? I've got a Realtek RTL-81815, and I ndiswrapped it successfully- and I can -see- the SSID for my wireless network (I removed WEP for set-up,) but it won't connect to it. Anyone have any trouble shooting ideas?
[07:22] <Paddy_EIRE> gRaCiOsO, at which point in the startup
[07:23] <djm62> rhalff: tried preferences and google, and I don't want to use lynx or links because (a) I like the gnome desktop, and (b) I will want to view images, just not all the random crud...
[07:23] <sarah> Sarah Ohara
[07:23] <neverblue> !cron
[07:23] <ubotu> cron is a way to schedule execution of software/scripts. See https://help.ubuntu.com/community/CronHowto  -  There is also a decent Howto at http://www.tech-geeks.org/contrib/mdrone/cron&crontab-howto.htm
[07:23] <Paddy_EIRE> djm62, that sounds like a terrible service if they charge by the bit
[07:23] <djm62> although links is an option.... if I can bear the bandwidth to apt-get it :)
[07:23] <neverblue> !cron gRaCiOsO
[07:23] <ubotu> Sorry, I don't know anything about cron gracioso - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[07:24] <neverblue> !cron | gRaCiOsO
[07:24] <gRaCiOsO> Paddy_EIRE well sorry im a novice in this and i dont understand really well but i only want that script starts when i turn on my computer
[07:24] <ubotu> gRaCiOsO: please see above
[07:24] <disinterested> djm whats it cost u by the bit? and i take it u dont download movies
[07:24] <djm62> Paddy_EIRE: PAYG broadband == net loss
[07:24] <ferronica> in which format should i save Open office org word processor document so that i can read in windows also ?
[07:24] <roaet> What are some reasons why an ubuntu box would be able to communicate over the network with other computers on the LAN but not PCs outside the lan. But computers outside the LAN can connect to that ubuntu box?
[07:24] <Quanorde> Ferronica = .doc
[07:24] <Paddy_EIRE> djm62, why would you choose them
[07:24] <neverblue> ferronica, .doc
[07:24] <djm62> disinterested: not entirely sure because it's in rubles and I keep running out
[07:24] <sarah> sers leutz wir sehn uns
[07:24] <neverblue> roaet, router?
[07:24] <djm62> Paddy_EIRE: the clue's in the question ;) no choice ATM
[07:25] <BFrank_> does anyone know why Xorg using the Vesa driver on Ubuntu is so much slower redrawing in firefox than the same vesa driver on Xorg on FreeBSD?
[07:25] <rhalff> djm62: firefox has many options to tweak, don't know about epiphany, try about:config in the firefox url bar.
[07:25] <roaet> neverblue, router?
[07:25] <Paddy_EIRE> gRaCiOsO, follow the link neverblue  gave
[07:25] <neverblue> roaet, do you have one?
[07:25] <djm62> rhalff: tried that with anything mentioning "image": can you suggest anything else?
[07:25] <cofego> ola
[07:25] <Paddy_EIRE> !cron | gRaCiOsO
[07:25] <roaet> neverblue: aye.
[07:25] <ubotu> gRaCiOsO: cron is a way to schedule execution of software/scripts. See https://help.ubuntu.com/community/CronHowto  -  There is also a decent Howto at http://www.tech-geeks.org/contrib/mdrone/cron&crontab-howto.htm
[07:25] <Reed_> anyone know if 4.10 Ubuntu is the only available version for Dell Optiplex 260?
[07:25] <neverblue> roaet, what services are you using for connecting?
[07:25] <Reed_> I've tried 7.04 and 6.10 and neither will boot
[07:25] <gRaCiOsO> thanks
[07:26] <wols> roaet: missing DNS
[07:26] <BFrank_> Did you try the alternative CD?
[07:26] <ferronica> neverblue: Quanorde: .doc available in three extension
[07:26] <RememberPOL> Hey is it possible to get my Sager NP5720 laptop's 1.3 MP integrated webcam functioning?
[07:26] <magnetron> Reed_: try the "alternate" cd
[07:26] <neverblue> Reed_, get the alternative CD
[07:26] <roaet> wols: my server is headless, how do I set up DNS? (I checked the wiki).
[07:26] <BFrank_> the live cd stuff in ubuntu is funky
[07:26] <wols> what is your DNS server?
[07:26] <djm62> I guess I could switch to firefox
[07:26] <roaet> neverblue: the outside connects through HTTP.
[07:26] <ferronica> neverblue: Quanorde: .?
[07:26] <roaet> neverblue: internally they can connect using what ever method they wish.
[07:27] <angasule> sometimes my network goes down for no apparent reason and I can't get it up again (no jokes, please :) ), even ifconfig down and back up, reconfiguring eth0, nothing works, I have an nvidia motherboard with an integrated card
[07:27] <roaet> wols: the DNS server is the router, and it is set up properly for other computers on the network.
[07:27] <wols> roaet: check /etc/resolv.conf
[07:27] <ferronica> neverblue: Quanorde: .doc available in three extension
[07:27] <roaet> wols: thank you.
[07:27] <Paddy_EIRE> angasule, have you asked your isp the status of your line?
[07:27] <karmic> hey guys, i have a lenovo t60, and if i enable desktop effects, my screen turns white, any ideas?
[07:28] <kouji> is it just me or is the font rendering in kubuntu better than ubuntu
[07:28] <wols> roaet: and ping an ip. say ping 72.14.207.99
[07:28] <Paddy_EIRE> angasule, does the same thing happen with another OS
[07:28] <wols> karmic: what videocard?
[07:28] <rhalff> djm62: firefox has the option to not load images in the normal preferences
[07:28] <angasule> Paddy_EIRE: rebooting the pc brings it back up, so it's obviously my computer
[07:29] <djm62> rhalff: ah, excellent
[07:29] <richdurhm> hey guys tryin to connect to someones computer using vnc i keep getting
[07:29] <richdurhm> Permission denied (publickey,password)
[07:29] <djm62> byebye epiphany, we hardly knew ye
[07:29] <armadillo> I was installing Feisty faun on a new computer off of the live CH.  I accidentlay cancled the format on my sata hard drive before it was complete,  now when I try to boot off the CD I get the error "ubuntu  /bin/sh: can't access tty; job control turned off"  I'm asuming I need to reformat the hard drive.  how whould I do that from the prompt?
[07:29] <Paddy_EIRE> angasule, have you tried with any other os
[07:29] <wols> angasule: when it happens, check dmesg and check lsmod if forcedeth is loaded, also run /etc/init.d/networking restart
[07:29] <richdurhm> eljak,  u there i keep getting Permission denied (publickey,password)
[07:29] <angasule> Paddy_EIRE: I have an adsl modem connected with ethernet to a switch and then to my pc, I can telnet to the modem alright and says the connection to my isp is working
[07:30] <angasule> wols: thanks, will do next time it happens :)
[07:30] <karmic> wols, its intel, onboard
[07:30] <BFrank_> does anyone know why Xorg using the Vesa driver on Ubuntu is so much slower redrawing in firefox than the same vesa driver on Xorg on FreeBSD?
[07:30] <MrKeuner> hi, I have installed fetchmail and set up a fetchmail conf file. It works when I run fetchmail. However, I could not find out what is the default polling frequency for fetchmail packaged by ubuntu
[07:30] <wols> karmic: 3d is working?
[07:30] <karmic> wols, im not quite sure which, any idea how i owuld find out?
[07:30] <karmic> wols, i know glxgears works
[07:30] <Paddy_EIRE> angasule, wols seems to have the right idea
[07:30] <karmic> wols, thats all
[07:30] <neverblue> roaet, what service is having an issue then?
[07:30] <wols> MrKeuner: fetchmail.conf has an option for that
[07:30] <angasule> Paddy_EIRE: yeap, til next time, then, thanks :)
[07:30] <karmic> wols, ~700fps
[07:30] <neverblue> ah, looks like you already got the help you need
[07:30] <hendrixski> to run the installCD with noacpi I just hit F6 and add noacpi after it right?  and this should keep the fan on all of the time, right?
[07:30] <SAM_theman> !vmware
[07:30] <ubotu> VMWare Player is in Ubuntu's !Multiverse repository (package "vmware-player"), and http://www.easyvmx.com/easyvmx.shtml can create VMs for it. For VMWare Server, instructions can be found at https://help.ubuntu.com/community/VMware - See also !virtualizers
[07:31] <wols> karmic: then check if 3d hardware acceleration works. I suspect it doesn't
[07:31] <karmic> wols, but looks choppy
[07:31] <MrKeuner> wols: local copy or /etc copy?
[07:31] <karmic> wols, how do i do that?
[07:31] <wols> karmic: yes. software rendering. you don't want tot. beryl can't work with it
[07:31] <wols> MrKeuner: /etc/ when in daemon mode
[07:31] <eljak> richdurhm: did you configure the desktop sharing on remote machine? the problem is there but i dont remember how i did now i connect to windows and it is not the same but i remember i had same problem and it was coz the desktop sharing configuration was not right
[07:31] <Chore-Boy> omg!!!! im runnin diablo!!!!!!!!
[07:31] <MrKeuner> wols: OK thanks
[07:32] <eljak> what does omg mean?
[07:32] <Chore-Boy> it's sort for OMFG
[07:32] <richdurhm> eljak,  ya i mean i told him to set apssword but im not sure what is goin on
[07:32] <djm62> :-D
[07:32] <angasule> Chore-Boy: in wine?
[07:32] <hendrixski> to run the installCD with noacpi I just hit F6 and add noacpi after it right?  and this should keep the fan on all of the time, right?
[07:32] <Chore-Boy> angasule: yeah, alls i needed was the d2loader...
[07:32] <hendrixski> or am I supposed to do something like --noacpi  or -noacpi??
[07:32] <Chore-Boy> angasule its minimized now...
[07:32] <angasule> Chore-Boy: I run Oblivion :) and frogger, although that's not so amazing heh
[07:33] <hendrixski> to run the installCD with noacpi I just hit F6 and add noacpi after it right?  and this should keep the fan on all of the time, right?
[07:33] <hendrixski> or am I supposed to do something like --noacpi  or -noacpi??
[07:33] <steel_lady> I am in a conference and I need urgent help!!! I accidentally unmounted one partition, what can I do???
[07:33] <wols> steel_lady: mount it
[07:33] <sTaTix_1> if i am downloading files for ubuntu... do i DL deb gpm or kentoo
[07:33] <Chore-Boy> cool.... i gotta play it to test it out, see youg uys
[07:33] <MrKeuner> wols: I suppose it will poll as root in that case?
[07:33] <wols> MrKeuner: yes
[07:33] <hendrixski> steel_lady,  you can remount it :-)  if you know what the partition was lets say sda3 just type mount /dev/sda3  /location/where/you/mount/it/to
[07:33] <Reed_> Is minimal CD the same as alternative?
[07:33] <MrKeuner> wols: I mean how will it know which spool to add it to?
[07:34] <wols> by editing the config file properly
[07:34] <hendrixski> steel_lady, for information on how to mount something just type in "man mount"
[07:34] <eljak> steel_mount there is an option to mount that mounts all partitions in fstab i think i dont know if it helps in your case
[07:34] <sTaTix_1> if i am downloading files for ubuntu... do i DL deb gpm or kentoo
[07:34] <karmic> wols : how do i enable 3d hardware acceleration?
[07:34] <wols> user blah there is user foo here
[07:34] <MrKeuner> wols: OK. thanks again
[07:34] <magnetron> sTaTix_1: generally you install apps with Synaptic, it will download them for you. they are in deb format
[07:34] <ferronica> in which format should i save Open office org word processor document so that i can read in windows also ? .doc available in three extension
[07:34] <sTaTix_1> k
[07:34] <sTaTix_1> thank you
[07:34] <steel_lady> <hendrixski, how do I know the location where to mount to and how to recover the link on the desktop?
[07:34] <eljak> sorry about the nick :)
[07:34] <magnetron> ferronica: try all 3
[07:35] <magnetron> ferronica: depends on what version of MS office you use
[07:35] <wols> karmic: http://doc.gwos.org/index.php/BerylOnEdgy
[07:35] <hendrixski> steel_lady, that's a good question ... unfortunately my limited experience has always just been me guessing which thing to mount...
[07:35] <wols> steel_lady: cat fstab
mount/dev/sda6: No such file or directory
[07:36] <wols> steel_lady: cat /etc/fstab
[07:36] <hendrixski> steel_lady, is it a USB thing, a second hard-drive, what?  'cause it would probably remount autmoatically if you rebooted :-)
[07:36] <bullgard4> i2cdetect -l does not output anything. Is it correct to conclude that this computer does not have any i2c busses?
[07:36] <karmic> wols, ahh i checked xorg.conf and the driver it;s using is vesa
[07:36] <steel_lady> no it is just a shared partition of the disk!
[07:36] <wols> steel_lady: then it's in fdisk
[07:36] <wols> erm fstab
[07:36] <magnetron> steel_lady: cat /etc/fstab
[07:36] <wols> steel_lady: what was its mountpoint?
[07:36] <heroin> anyone know a good program to manage my music collection? like mass renaming files and stuff?
[07:37] <steel_lady> # <file system> <mount point>   <type>  <options>       <dump>  <pass>
[07:37] <steel_lady> proc            /proc           proc    defaults        0       0
[07:37] <steel_lady> # /dev/sda5 -- converted during upgrade to edgy
[07:37] <steel_lady> UUID=6a1ce138-c993-4b5d-bbc7-6c585aa2cee3 / ext3 defaults,errors=remount-ro 0 1
[07:37] <steel_lady> # /dev/sda8 -- converted during upgrade to edgy
[07:37] <steel_lady> UUID=ebe68bbf-103b-4a36-91f6-e674cba9919e /home ext3 defaults 0 2
[07:37] <steel_lady> # /dev/sda2 -- converted during upgrade to edgy
[07:37] <magnetron> heroin: mmv
[07:37] <steel_lady> UUID=8694FBDE94FBCF25 /media/sda2 ntfs defaults,nls=utf8,umask=007,gid=46 0 1
[07:37] <steel_lady> # /dev/sda6 -- converted during upgrade to edgy
[07:37] <steel_lady> UUID=4594-6694 /media/sda6 vfat defaults,utf8,umask=007,gid=46 0 1
[07:37] <eljak> steel_lady :if it is in fstab or mtab there is an option to mount command where you mount all partition in those files
[07:37] <steel_lady> # /dev/sda7 -- converted during upgrade to edgy
[07:37] <steel_lady> UUID=0307a5f7-d433-4de0-8c53-65994673e48b none swap sw 0 0
[07:37] <steel_lady> /dev/scd0       /media/cdrom0   udf,iso9660 user,noauto     0       0
[07:37] <steel_lady> Wols, it was sda6
[07:37] <Paddy_EIRE> !paste | steel_lady
[07:37] <ubotu> steel_lady: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic)
[07:37] <wols> steel_lady: sudo mount /dev/sda7
[07:38] <heroin> magnetron: urm.. that looks troublesome
[07:38] <magnetron> heroin: or just use Rhytmbox, amarok or whatever
[07:38] <karmic> wols, do you know if i should change vesa to intel?
[07:38] <heroin> magnetron: well i guues i wil ldive into konqueror
[07:38] <hendrixski> YES!!! this time I entered the installer and the fan didn't go off... I must have typed in the acpi=off correctly (somehow it didn't work with noacpi) hhhmmm
[07:39] <Dark> hi I'm having a few problems with XGL and Moodin can someone help me?
[07:39] <steel_lady> wols, now it is the bad thing that I will need sudo to do anything there
[07:39] <steel_lady> I think I should not have done it with sudo
[07:39] <wceoscar> Isnt there a way to make all my windows ransparent... i have beryl but it makes my system slow
[07:40] <novato_br> !xchat programming script
[07:40] <joshk_> question: it's not possible to use kickstart or preseed on the 'desktop' CDs, right?
[07:40] <novato_br> !xchatprogramming script
[07:40] <novato_br> !xchat
[07:40] <ubotu> Sorry, I don't know anything about xchat - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[07:40] <novato_br> !irc
[07:40] <ubotu> A list of official Ubuntu IRC channels, as well as IRC clients for Ubuntu, can be found at https://help.ubuntu.com/community/InternetRelayChat - For a general list of !freenode channels, see http://freenode.net/faq.shtml#channellist - See also !Guidelines
[07:40] <hendrixski> wceoscar, yes, you can do that with beryl... just go to the beryl control thingy and one of the options is transparency
[07:40] <wols> novato_br: x-chat is scripted via perl or python
[07:40] <Dark> !moodin
[07:40] <ferronica> magnetron: i am using microsoft word 2003 in Xp pro
[07:40] <ubotu> moodin is a ksplash theme engine, enabled by default in Kubuntu Dapper, and you can grab it for Breezy here: http://www.kde-look.org/content/show.php?content=25705
[07:40] <LGKeiz> moo: os: Microsoft Windows XP Professional - Service Pack 2 (5.1.2600) up: 5days 15hrs 33secs cpu: Intel(R) Pentium(R) 4 CPU 2.00GHz at 1993MHz (8% Load) gfx: NVIDIA GeForce4 MX 4000 128MB res: 1024x768 32bit 60Hz ram: 558/1535MB (36.37%) [||||------]  hdd: C:\ 59.61GB/111.76GB net: Wireless-G PCI Adapter with SRX400 - 108MB/s 1.78GB In 391.43MB Out
[07:40] <novato_br> i don't know, wols
[07:41] <novato_br> i want to make one script for xchat
[07:41] <roaet> how does one permanently change the hostname?
[07:41] <Jeeva> moo: os: Microsoft Windows XP Professional - Service Pack 2 (5.1.2600) up: 5days 2hrs 16mins 35secs cpu: AMD Athlon(tm) XP 2500+ at 1833MHz (100% Load) gfx: NVIDIA GeForce 6600 GT 128MB res: 1024x768 16bit 75Hz ram: 946/1023.48MB (92.4%) [|||||||||-]  hdd: C:\ 3.95GB/176.54GB Free D:\ 390.27MB/111.79GB Free E:\ 468.11MB/9.76GB Free net: Hamachi Network Interface - 100MB/s 15.29MB In 14.74MB Out
[07:41] <heroin> magnetron: does mmv have a frontend?
[07:41] <wols> novato_br: and I told you what you need to use
[07:41] <roaet> i did hostname <newname> and when I rebooted it went back to the old one.
[07:41] <novato_br> ok
[07:41] <magnetron> ferronica: is any of those 3 .doc format called word 2003?
[07:41] <magnetron> heroin: no
[07:41] <novato_br> wols, thx
[07:41] <wols> roaet: /etc/hostname
[07:41] <ferronica> magnetron: no
[07:41] <Reed_> I can't find an option to download the alternative cd
[07:42] <wols> roaet: also /etc/hosts usually
[07:42] <magnetron> Reed_: you have to check a box for alternate
[07:42] <roaet> ah that's right
[07:42] <alesan> ubuntu has syslog or syslog-ng ???
[07:42] <finalbeta> How do I see if my USB disk attached is USB 1 or USB 2 full speed
[07:42] <wceoscar> I already have beryl... but it makes my system slow so now im using desktop effects... but i want transparency, isnt there a way to get transparency with desktop effects?
[07:42] <magnetron> ferronica: use the word97/2000/xp option
[07:42] <wols> Reed_: under "download" there is a checkbox for alternate CD
[07:43] <ferronica> magnetron: ok
 I already have beryl... but it makes my system slow so now im using desktop effects... but i want transparency, isnt there a way to get transparency with desktop effects? << Smart, Transparency is what makes the system slow.
[07:43] <Reed_> hmm with the alternative CD will it come with an installer, or will I need to use the text based version first?
[07:44] <heroin> magnetron: time for some man reading
[07:44] <wols> Reed_: it has a text based installer
[07:44] <Ilokaasu> Reed_: alternative has only the text one
[07:44] <Ilokaasu> but its not hard to use
[07:44] <Reed_> is it possible to just boot from CD rather than installing it with the text based version?
[07:45] <wols> yes. it's called a live cd
[07:45] <tck> can you install java under wine, im trying to run an app under wine and it needs java
[07:45] <wols> the stanrard ubuntu installcd is a live cd
[07:45] <Ilokaasu> alternative is not livecd tough
[07:45] <Reed_> ... I can't get the liveCD to boot from CD nor install
[07:45] <wols> Reed_: what is the error you get?
[07:46] <finalbeta> tck: yes, google for a howto
[07:46] <Reed_> There wasn't an error. It would just freeze up.
[07:46] <bobsomebody> hi everyone
[07:46] <wols> when does it freeze? at which point
[07:46] <Reed_> I have Dell Optiplex GX260, 1 GB of Ram
[07:46] <magnetron> Reed_: that's why you should use the alternate cd. try it and make an install
[07:46] <bobsomebody> can someone tell me how to make a login script for xchat? or point me to a how-to?
[07:47] <finalbeta> Reed_: when booting, change to a virtual terminal "cntr-alt-F1" and see what errors it gives.
[07:47] <wceoscar> whats the name to search for those little add ons on your desktop that display cpu temp, efficiency etc???????????????????????????????
[07:47] <roaet> ty
[07:47] <heroin> magnetron: so would mmv -r [0-20]  moby rename the numbers 1-20 to moby?
[07:47] <finalbeta> Reed_: Feisty has some major issues with libata, doesn't boot on my dell unless I take out the CD drive.
[07:47] <bobsomebody> wceoscar: widgets/gadgets
[07:47] <magnetron> wceoscar: i don't know!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
[07:48] <zendo> Hi. Can someone please tell me how to completely disable "NetworkManager Applet" (no, I definitely don't need it)? I've already unchecked "Network Manager" in Session's startup list, but it still starts when I log on.
[07:48] <bobsomebody> i loled
[07:48] <magnetron> heroin: i don't know
[07:48] <wceoscar> last question... were should i go to change the color of the fonts on my aplication-place-system menu?
[07:48] <yehweh> wceoscar: If you have compiz try screenlets
[07:49] <Tiradin> Is there a package that I can download from apt-get that is Java for Firefox? the .bin file I got doesn't work, and I would like to make FireFox as functional on the web as I can.
[07:49] <joe4444> what's the best way to enable TwinView for 2 flat panel displays connected via DVI to a nVidia 7900GS after a new install of Feisty?  this was tough in Edgy but now i can't even get my 2nd LCD to receive a signal, and nvidia-settings only detects 1 display
[07:49] <finalbeta> Tiradin: apt-cache search java , then install what you found.
[07:49] <bobsomebody> Tiradin: look in the add/remove programs, there are a couple java packs in there
[07:50] <wols> !java | Tiradin
[07:50] <ubotu> Tiradin: To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository. Enable the backports repository on Edgy to install sun-java6-jre
[07:50] <mortuis99> joe4444 try xinerama
[07:50] <bobsomebody> joe4444: did you ever get you xorg fixed?
[07:50] <hector__> Hello people
[07:50] <joe4444> mortuis99: i looked into that, but i'd like to use Beryl
[07:51] <hector__> Is there anyone that knows how to configure maildrop-2.0.4 to access mysql
[07:51] <joe4444> bobsomebody: never got 2 displays working at once... i'm about to reinstall Feisty for the 4th time b/c i can't be sure if i've removed all the different versions of nvidia drivers i tried to install
[07:51] <heroin> anyone know a good program to manage my music collection? like mass renaming files and stuff?
[07:51] <mfg> hola me llamo Laura
[07:51] <bobsomebody> let me search round for you
[07:51] <zendo> Anyone please?
[07:52] <Pici> !es | mfg
[07:52] <heroin> zendo: what?
[07:52] <ubotu> mfg: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[07:52] <mfg> holaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
[07:52] <nickrud> heroin, I've always liked easytag
[07:52] <mortuis99> heroin tried rhythmbox
[07:52] <arreola> why are other wireless networks showing up in my network manager?
[07:53] <Ayarcy> arreola: Because they're your neighbors'?
[07:53] <heroin> mortuis99: i dont want to install rythembox
[07:53] <zendo> heroin: "Hi. Can someone please tell me how to completely disable "NetworkManager Applet" (no, I definitely don't need it)? I've already unchecked "Network Manager" in Session's startup list, but it still starts when I log on."
[07:53] <mortuis99> because u are receiving signals from them
[07:53] <arreola> it has never shown up before...?
[07:53] <bobsomebody> joe4444: did you do the restricted driver thing?
[07:53] <joe4444> arreola: maybe they just got a wireless router
[07:53] <joe4444> bobsomebody: yeah
[07:53] <bobsomebody> https://help.ubuntu.com/community/NvidiaMultiMonitors?highlight=%28nvidia%29
[07:53] <mortuis99> ok
[07:53] <heroin> zendo: sure , sudo apt-get remove --purge FOO
[07:53] <heroin> where FOO is an application name
[07:53] <b08y> zendo, applet or that sys tray thing
[07:53] <nickrud> zendo, https://help.ubuntu.com/community/WifiDocs/NetworkManager#head-1de145d05f957ff659f5fdb58974ec3e5864def5
[07:54] <arreola> it is just strange to see.
[07:54] <joe4444> bobsomebody: i tried versions 6931, 7755 (i think), and 100.14 or something (downloaded from nvidia's website)
[07:54] <zendo> b08y: that systray thing
[07:54] <ep2011> I installed the latest kernel update (-16) and now I can't boot into that, it freezes at the loading bar, about 1/6 way through. Im in -15 now
[07:54] <arreola> if it shows up - probably means it is an open connecting with no WEP -
[07:54] <arreola> correct?
[07:54] <ep2011> can i have some help?
[07:55] <Ayarcy> arreola: Depends on where you are.  I have lots of neighboring networks I can see where I live.
[07:55] <joe4444> arreola: no, it could still be password protected
[07:55] <yehweh> arreola: nope, you will see all networks but cant connect to the secure ones
[07:55] <bsdunix> almost all of my apt-get attempts are broken from this complaint; dependency problems prevent configuration of acpi-support. Package acpid is not configured yet. <<wtf?!
[07:56] <Ayarcy> arreola: Right, that way you get the chance to connect to them, if you have the credentials.
[07:56] <joe4444> bobsomebody: the problem is that nvidia-settings only detects one monitor, so the GUI isn't helpful at all for TwinView (that option is disabled actually)
[07:56] <b08y> zendo, try that heroin said to you
[07:56] <arreola> secure ones = WEP, WPA, etc?
[07:56] <magnetron> arreola: wep is insecure
[07:56] <bobsomebody> joe4444: did you check the http://ubuntuguide.org/wiki/Ubuntu:Feisty
[07:56] <wols> arreola: no. only WPA is secure. WEP is easily broken
[07:56] <bobsomebody> WEP is made of FAILURE
[07:56] <nickrud> bsdunix, try sudo apt-get -f install , it often fixes those problems
[07:57] <zendo> thanks
[07:57] <arreola> is WEP 128-bit ok?
[07:57] <magnetron> arreola: no
[07:57] <arreola> WTF?
[07:57] <arreola> bummer. .. .
[07:57] <Ayarcy> arreola: WEP is not okay, at all, in any key length.
[07:57] <magnetron> arreola: use WPA PSK
[07:58] <burner> or open your wireless and share with the world!
[07:58] <joe4444> bobsomebody: yeah that was one of the first guides i tried... but when i run the nvidia settings GUI there is only 1 display, and when i tried to change the configuration to use TwinView that option was grayed out (disabled)
[07:58] <magnetron> arreola: sharing is caring
[07:58] <ep2011> I installed the latest kernel update (-16) and now I can't boot into that, it freezes at the loading bar, about 1/6 way through. Im in -15 now. Is there a way to fix it? If not, how do I uninstall it?
[07:58] <bsdunix> bsdairtools, kismet and aircrack can help with getting into a wpa lan
[07:58] <arreola> i would not mind sharing
[07:58] <arreola> :)
[07:59] <yehweh> arreola: wait till the riaa or mpaa knocks on your door ;)
[07:59] <bobsomebody> joe4444: can you pastebin your xorg.conf so i can see it?
[07:59] <arreola> what is riaa mpaa?
[07:59] <wols> arreola: ask wikipedia
[08:00] <yehweh> the devil
[08:00] <sico> i have errors on my hdd and i think i've fixed them.  i can get back into gnome, but now firefox doesn't work (and apt-get is having issues)
[08:00] <gerro> arreola: or google
[08:00] <gerro> sico: ext3?
[08:00] <joe4444> bobsomebody: right now it's probably way messed up... i'm going to format and install feisty one more time so i know i'm starting fresh... i'll be back in a few... will you be around?
[08:00] <sico> gerro, yes
[08:00] <Stormx2> This is rubbish. Nautilus won't start.
[08:00] <gerro> joe4444: sure
[08:00] <arreola> i see -
[08:00] <arreola> got it
[08:00] <bsdunix> i did sudo apt-get -f install and got a long list of dependancy problems; acpid, powermanagement, gnome-core, etc. gnome works.
[08:01] <gerro> sico: well did you follow what the error said rather than panicing and shutting off computer?
[08:01] <joe4444> bobsomebody: it'll take me about 25-30 minutes
[08:01] <bobsomebody> joe4444: yeah I will be here
[08:01] <bobsomebody> bobsumbody on AIM also
[08:01] <joe4444> thanks
[08:01] <arreola> recording industry, etc.
[08:01] <bobsomebody> in case im not
[08:01] <sico> gerro, of course, that's how i'm back in gnome :)
[08:01] <yehweh> ahhaaa
[08:01] <bobsomebody> np dude
[08:01] <nickrud> bsdunix, it seems likely that you've got a problem in /etc/apt/sources.list ; could you put that and the errors on a pastebin
[08:01] <gerro> sico: hmm what sort of system with ext3? is it writeback style?
[08:01] <arreola> the other wireless network is gone.
[08:01] <wols> sico: the error(s) apt-get tells you are not optional
[08:01] <bsdunix> where is our paste channel?
[08:02] <wols> that is fi you want us to help you
[08:02] <Ayarcy> !paste | bsdunix
[08:02] <wols> !paste
[08:02] <ubotu> bsdunix: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic)
[08:02] <nickrud> paste.ubuntu-n.org
[08:02] <arreola> the signal was super weak. . .
[08:02] <nickrud> er, above
[08:02] <Thms> is there a good wifi gui ?
[08:02] <bsdunix> thanks
[08:02] <burner> Thms: yes :)
[08:02] <sico> wols, it was errors with the filesystem.  wouldn't boot into gnome.  they are now fixed, but now firefox and apt-get will not run properly
[08:02] <gerro> Thms: umm I use wifi radar
[08:02] <gerro> Thms: kismet is good too
[08:02] <Thms> burner: which ?
[08:03] <sico> everything else seems to be working fine
[08:03] <newuserruk> Hi, i need some help installing samba on an older version of Ubuntu - 5.10 Breezy - can anyone help?
[08:03] <bobsomebody> Thms: look in add/remove programs under internet
[08:03] <burner> Thms: network manager http://linux.softpedia.com/screenshots/NetworkManager_1.png
[08:03] <Quanorde> Is anyone familiar with the issues surrounding RTL-8185 wireless cards that has some time to help me out? My card's working, and it sees a bunch of networks, but I get a signal strength of 0 for all of them, including my own.
[08:03] <sTaTix_1> can I use itunes on ubuntu
[08:03] <newuserruk> how do i go about doing this since the upgrade repositories seem to no longer be available for this version of ubuntu?
[08:03] <wols> sico: you didn't answer my question
[08:03] <nickrud> newuserruk, you probably should upgrade, breezy isn't getting any security or bug fixes, it end of life
[08:03] <Stormx2> My god.
[08:03] <sico> gerro, yes, it is writeback style
[08:03] <Stormx2> Nautilus won't die >__<
[08:03] <burner> Thms: if you install feisty, it's there by default
[08:03] <bobsomebody> god? where?
[08:04] <gerro> Quanorde: how is the card plugged in? is it through usb?
[08:04] <sico> wols, sorry :( i'm not the quickest.  I'm not sure what you mean
[08:04] <newuserruk> nickrud, im only using a live cd of breezy and need it only for a short time - i dont have enough time to upgrade ubuntu
[08:04] <Quanorde> Gerro = Motherboard.
[08:04] <burner> sTaTix_1: nope
[08:04] <sTaTix_1> awww
[08:04] <burner> sTaTix_1: but rhythmbox will connect to your ipod
[08:04] <newuserruk> nickrud is not possible to install samba some other way?
[08:04] <gerro> sico: well if you did any recent changes they might be lost so for instance if you did massive update but had power failure
[08:04] <nickrud> Stormx2, it's set to respawn in the session dialog under preferences, you need to change that to kill it
[08:04] <sTaTix_1> inaw, i wanted itunes for the coverflow
[08:04] <bobsomebody> wtf?!
[08:04] <nickrud> newuserruk, you could always compile it ;)
[08:04] <gerro> Quanorde: its integrated??
[08:04] <bobsomebody> how come x-wives think they get free tech support?
[08:04] <newuserruk> how do i do that? is it incredibly complicated?
[08:04] <sico> gerro, there was a power outage recently
[08:04] <burner> sTaTix_1: aww... email apple :)
[08:04] <sTaTix_1> i want a media player that is jukebox style so I can browse by album art
[08:04] <gerro> quanorde: oh you mean plugged into the motherboard bus
[08:04] <sTaTix_1> lol burner
[08:05] <Quanorde> Gerro: Yes.
[08:05] <Stormx2> nickrud: how can i get to that? It seems to have completely screwed up. It's listed as "uninteruptable" under gnome-system monitor
[08:05] <bobsomebody> omg this dumb ***** cant even run AdAware right....
[08:05] <sTaTix_1> im sure steve jobs would hook me up
[08:05] <burner> sTaTix_1: rb, banshee, and amarok all support album art
[08:05] <gerro> quanorde: those sort of wireless devices usually suck from my experience with them
[08:05] <sTaTix_1> amarok keeps crashing
[08:05] <stoone> I can't print from java, any other programs work, when trying from java it shows job-stopped status, and when i resume it nothing happens but go back to job-stopped. any advice?
[08:05] <gerro> quanorde: does ndiswrapper have any support for it?
[08:05] <sTaTix_1> banshee only shows the album art when you play
[08:05] <sTaTix_1> dunno what rb is
[08:05] <tck> anyone manage to install java under wine?
[08:05] <gerro> quanorde: what is its exact lspci line?
[08:05] <burner> rb == rhythmbox... same as banshee... only when you play
[08:05] <Quanorde> Gerro: Yes, I ndiswrapped the driver. Just a sec.
[08:05] <Rprp>   ChanServ Daveym[BBL]  Duiv` Duiv`gone GameServ Global MemoServ NickServ OperServ Quis|afk Rprp Tim
[08:06] <sTaTix_1> it crashes too
[08:06] <Stormx2> tck: Why would you do that? 99% of java apps are cross-platform...
[08:06] <burner> really?  enver crashes here
[08:06] <Quanorde> Gerro: 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
[08:06] <sTaTix_1> there is one that i found, but its perl and i have no clue how to install it
[08:06] <sTaTix_1> its called Shrill
[08:06] <nickrud> Stormx2, erm, try setting it to normal in preferences->sessions tab current session; click it and change the dropdown from restart to normal. Why it says uninterruptable in sys monitor; maybe it checks the sessions dialog (heh)
[08:06] <tck> Stormx2, i have an .exe that depends on java for install
[08:06] <sTaTix_1> looks sweet, anyone install it or try it yet
[08:06] <burner> sTaTix_1: try "listen" or "exaile" ?  they're both linked on gnomefiles.org
[08:06] <gerro> quanorde: hmm think a friend of mine had something similar, what sort of computer you using?
[08:06] <gerro> quanorde: is it a laptop?
[08:07] <Quanorde> Gerro: No. PC.
[08:07] <gerro> quanorde: which version of ndiswrapper you using? does ndiswrapper --version give bad output?
[08:07] <bsdunix> i have pasted my error message at http://paste.ubuntu-nl.org/26301/ i am using feisty-fawn (server) - new install. running kdm/gnome
[08:08] <tck> Stormx2, basically its an interactive test engine .exe and requires java for install
[08:08] <XBehave> I want to use my onboard gfx aswell as my card is this possible? how do i find out about the onboard card given that its an old MB and i dont have the docs for it
[08:08] <tck> now i tried to install java a la wine and it say its missing a jvm.dll
[08:08] <sico> E: /var/cache/apt/archives/language-pack-en_1%3a7.04+20070601_all.deb: failed in buffer_read(fd)
[08:08] <Quanorde> Gerro: I installed ndiswrapper from source, Ndiswrapper -l says my driver is installe & hardware present.
[08:08] <newuserruk> Could I install samba using a binary on www.samba.org?
[08:08] <sico> that's what happens when i try to update
[08:08] <wols> XBehave: yes it's possible. lspci
[08:08] <Eric_Jardas> newuserruk, of course
[08:08] <bsdunix> i tried attacking dependency tree from the top. it is always same return
[08:08] <wols> sico: delelte all downloaded deb files
[08:08] <wols> apt-get help
[08:08] <timposey> is there a way to start a stopped job from printing when the resume button does not work?
[08:09] <heroin> nickrud: dude does easytag also automatically rename stuff for me?
[08:09] <newuserruk> Eric_Jardas: how do i go about doing that?
[08:09] <Samus_Aran> hello.  I have a system with two RealTek 8139 PCI network cards, and when I boot up the system (Ubuntu Feisty Fawn), it only loads the driver once and so only eth0 appears.  any ideas how to make it load the driver twice ?
[08:09] <nickrud> bsdunix, you've installed gnome, which is debian :)  remove gnome, all that stuff, and install ubuntu-desktop to get a consistent gnome
[08:10] <nickrud> heroin, yes, and it's extremely flexible
[08:10] <bsdunix> oh! thanks nickrud
[08:10] <sico> Reading database ... dpkg: error processing liboggflac3 (--remove):
[08:10] <sico>  failed in buffer_read(fd): files list for package `gnome-applets-data': Input/output error
[08:10] <newuserruk> Eric_Jardas: how do i go about doing that?
[08:10] <sico> hdd screwed?
[08:10] <chrismurf> I want a USB device (no kernel driver) to have specific permissions when I plug it in, but under Feisty there's no /etc/hotplug... what should I be looking for instead?  Who handles hotplug events?
[08:10] <sico> i did the autoclean
[08:10] <trekkme>  all my compiz plugins seem to work fine with ubuntu but the cube wont, what do i do?
[08:10] <Eric_Jardas> newuserruk, is the extension tar.gz ?
[08:10] <Eric_Jardas> or ?
[08:11] <gerro> quanorde: http://ndiswrapper.sourceforge.net/joomla/index.php?/component/option,com_openwiki/Itemid,33/id,list_o-z/ number 30 on there looks promising see if you can find anything else on the site it suggests for driver
[08:11] <Quanorde> Did I lose you, Gerro?
[08:11] <burner> chrismurf: udev?
[08:11] <gerro> quanorde: where did you get your driver from?
[08:11] <newuserruk> Eric: .tar
[08:11] <chrismurf> burner, thanks - will investigate
[08:11] <XBehave> wols: i cant fund anything i dont recognise in lspci only an LPC interface, do i need to change bios or something so its listed?
[08:11] <Eric_Jardas> newuserruk, well first extract it
[08:11] <Quanorde> Gerro: Directly from the Realtek site.
[08:12] <heroin> nickrud: urm u have MSN?
[08:12] <newuserruk> yes
[08:12] <burner> newuserruk: if you want samba, why not just apt-get it?
[08:12] <nickrud> heroin, no
[08:12] <benjoldersma> hello all
[08:12] <newuserruk> im using breezy and the repositories dont work
[08:12] <timposey> Does anyone know if there a way to start a stopped print job from printing when the resume button does not work?
[08:12] <gerro> quanorde: it said on ndiswrapper site for previous models they've had trouble with the drivers available directly from manufacturer
[08:12] <Eric_Jardas> newuserruk, is there a readme file in it ?
[08:12] <burner> newuserruk: can i say upgrade?  breezy isn't supported anymore
[08:12] <benjoldersma> my nautilus is crashing all the time
[08:12] <newuserruk> yes
[08:12] <benjoldersma> anyone have any ideas?
[08:12] <burner> newuserruk: it's easy to go to dapper
[08:12] <burner> newuserruk: then to edgy
[08:12] <Quanorde> Gerro: My system recognizes it card, though.
[08:12] <newuserruk> with a live cd?
[08:12] <XBehave> newuserruk: why you still on brezy?
[08:12] <nickrud> timposey, try pointing your browser at localhost:631 , see if that interface will work
[08:12] <benjoldersma> as soon as i close a window, i can't ever open any new ones
[08:12] <burner> newuserruk: if you want to upgrade... you don't need a cd
[08:12] <newuserruk> Eric: its a live cd
[08:12] <benjoldersma> and the cpu pegs unless i stop the process
[08:12] <burner> !upgrade | newuserruk
[08:12] <ubotu> newuserruk: For upgrading, see the instructions at https://help.ubuntu.com/community/UpgradeNotes
[08:12] <gerro> Quanorde: that just means its in the ubuntu database of hardware
[08:12] <heroin> nickrud: iam getting pissed off i want to clean my music collection but everything is screwed up
[08:12] <wols> XBehave: lspci. paste the output in a pastebin
[08:13] <Quanorde> Gerro: So I should hunt out a different driver source?
[08:13] <eljak> benjoldersma, run it from terminal and see what it reports as errors
[08:13] <gerro> quanorde: yeah most likely
[08:13] <burner> newuserruk: if you want to go all the wya to feisty... it'll be quicker to backup, install feisty, and restore files
[08:13] <burner> newuserruk: if you just want dapper, follow that link
[08:13] <Quanorde> Gerro: Alrighty. I will try that. Thanks!
[08:13] <gerro> quanorde: did you try modprobe ndiswrapper? and ndiswrapper -m
[08:13] <benjoldersma> eljak: okay will do
[08:13] <gerro> quanorde: also if you changed driver you have to rmmod ndiswraper then modprobe it again with new driver
[08:13] <nickrud> heroin, I'd suggest pulling out a few folders into a temporary location and experimenting with easytag. You really can set it up nicely, but there is a learning curve. Easy is deceptive; it should be powertag
[08:14] <XBehave> wols: http://pastebin.com/932055
[08:14] <Quanorde> Gerro: -m returns: modprobe config already contains alias directive
[08:14] <gerro> quanorde: that's good means you already did it and ndiswrapper is loaded at boot
[08:15] <killruana> What is the name of the french ubuntu channel ?
[08:15] <Quanorde> Gerro: Yes, I messed for days to get ndiswrapper working. It's not included on the Fiesty CD. :/
[08:15] <wols> XBehave: is your videocard on or of in bios?
[08:15] <wols> !fr | killruana
[08:15] <ubotu> killruana: Allez a #ubuntu-fr ou #kubuntu-fr pour de l'aide et de la discussion en francais.
[08:15] <killruana> yhx
[08:15] <KjetilK> I compiled my own 2.6.22 kernel based on the gutsy sources and kernel to try to get the new intel wifi drivers and rfkill working. Disabled things that I was pretty sure I didn't need... But alas, the kernel paniced on 00:1c.3, which is
[08:15] <KjetilK> PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
[08:15] <starz> mmm
[08:15] <starz> i got a really wierd error
[08:16] <XBehave> i couldnt find an on/off setting in bios, just a pci/agp preference im on agp because nothing happens when i try it with PCI i dont get a screen
[08:16] <starz> i think i know how i got it tho -
[08:16] <KjetilK> I've checked that I haven't disabled PCI Express, what else is there that I could have disabled to cause this...?
[08:16] <DagonIT> how do I update thunderbird?
[08:16] <benjoldersma> eljak: it doesn't really work, if i stop the current nautilus process, my CPU goes down, but starting a new nautilus from a shell just does nothing and waits to ext.  if I let the main nautilus process run, it goes into sleep mode, sucks up a full cpu, and no windows open
[08:16] <zntneo> does anyone know how to setup fetchmail with kerberos authentication?
[08:16] <starz> current error is that i cannot start X b/c "could not find default cursor theme 'cursor' "
[08:16] <starz> help??
[08:16] <rbs-tito> DagonIT: If you want a major release upgrade you will have to do it manually
[08:17] <starz> i think its because i tried to install artwiz-cursor
[08:17] <nickrud> DagonIT, wait for it to appear in the repositories (don't hold your breath) or get it from mozilla
[08:17] <DagonIT> rbs - tito  -- I was afraid of that
[08:17] <leagris> Anyone can recommand a program for non linear video editing which is not a joke?
[08:17] <zntneo> does anyone know how to setup fetchmail period?
[08:17] <niuq> can you tell me a ftp server besides gftp (im having problems with it)
[08:18] <nickrud> zntneo, install fetchmailconf , it's a decent wizard
[08:18] <roadkill> some prick in #winehq banned me for no reason
[08:18] <zntneo> thanks i shall try
[08:18] <KjetilK> niuq: I use twoftpd
[08:18] <SoulinEther> leagris: Cinelerra?
[08:18] <leagris> Tested Kino and hogins, these are jokes unable to mix several audio and video tracks at once.
[08:19] <Ayarcy> !ohmy | roadkill
[08:19] <niuq> Kjetilk: its terminal or it has gui?
[08:19] <ubotu> roadkill: Please watch your language and keep this channel family friendly.
[08:19] <niuq> !twoftpd
[08:19] <ubotu> Sorry, I don't know anything about twoftpd - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[08:19] <tolle> Is there an easy way to limit the upload speed for a certain port?
[08:19] <leagris> !cinelerra
[08:19] <ubotu> cinelerra is a video editor and compositor. Install instructions can be found on http://cvs.cinelerra.org/getting_cinelerra.php#ubuntu
[08:19] <gerro> !ohmy | linux
[08:19] <ubotu> linux: Please watch your language and keep this channel family friendly.
[08:19] <roadkill> ubotu:  oops
[08:19] <ubotu> Sorry, I don't know anything about oops - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[08:19] <magnetron> !offtopic
[08:19] <ubotu> #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome!
[08:19] <stevej> Are there any currently available usb wireless 802.11g network dongles that are supported out of the box (off the CD) by Feisty?
[08:19] <XBehave> wols:  i couldnt find an on/off setting in bios, just a pci/agp preference im on agp because nothing happens when i try it with PCI i dont get a screen
[08:20] <NeoGeo64> help where can i find ubuntu ultimate premium edition w/ coffee maker
[08:20] <magnetron> https://wiki.ubuntu.com/HardwareSupport stevej
[08:20] <roadkill> Ayarcy:  do u know of a site or way to get unbenned?
[08:20] <eljak> benjoldersma, i dont know usually apps output errors in terminal like complaining about missing libraries or something
[08:20] <yehweh> join #ubuntu-offtopic
[08:20] <timposey> nickrud  I tried pointing my browser at localhost:631 I got the interface and checked under jobs and it says that the "state" is Stopped.  I tried to print a test page and it prints fine.. but this job which was created by a java script program under ViewOne loads perfectly but every time has the state as stopped..
[08:21] <benjoldersma> thanks eljak
[08:21] <starz> o fuck
[08:21] <Ayarcy> roadkill: I sure don't.
[08:21] <starz> dont tell me i got to reinstall this damn thing just to get a cursor pack in
[08:21] <stevej> I was hoping for an opinion of quality and cost.
[08:21] <starz> er - bad french
[08:21] <starz> >.<
[08:21] <Quanord1> Gerro: <3 I figured it out from another thread- apparently you have to add a bogus character to the end of your SSID in order to get a connection. So, I am on my wireless, but at 30% signal. (And I'm sitting right next to the damned thing.) But! For now, I've made a big step. Thanks for your help!
[08:21] <nickrud> timposey, can you restart the job? if so, there's probably something wrong with the java script (and don't ask me anything about that)
[08:21] <KjetilK> niuq: it is just a very simple server, I think it uses debconf for configuration, but I can't even remember setting it up
[08:21] <SoulinEther> starz: you shouldn't have to... what's your problem?
[08:21] <roadkill> thx n e way
[08:22] <timposey> nickrud, can't restart I don't know what to do.. Thanks..
[08:22] <leagris> SoulinEther, having a try with cinelerra now
[08:22] <niuq> Kjetilk: maybe you could help me with the one im using now
[08:23] <nickrud> timposey, I don't have a printer here, but I know there's a button for the job that says restart or the like
[08:23] <XBehave> im going to mess with mt biod i may/or may not be back
[08:23] <niuq> Kjetilk: my transfers get stalled very often, like every 10 seconds
[08:23] <SoulinEther> leagris: is it working?
[08:23] <niuq> KjetilK
[08:23] <niuq> KjetilK: i am using gftp
[08:23] <leagris> SoulinEther, somehow, complaining about a privileged /proc/sys access but working
[08:23] <zntneo> um who ever helped me do they know if there is a package i can install that includes keberous comipiled into fetchmail?
[08:24] <niuq> KjetilK: ohh ok
[08:24] <KjetilK> oh
[08:24] <SoulinEther> leagris: good, i installed it on my last ubuntu install (edgy>feisty) and it didn't run. hope it works for ya, it's supposed to be good
[08:24] <KjetilK> niuq: oh, but that's not a server, that's a client
[08:24] <niuq> KjetilK: yeah yeah client sorry...
[08:24] <KjetilK> :-)
[08:24] <leagris> SoulinEther, core dumped when trying video capture :(
[08:24] <Dunas> Uh... hi!
[08:24] <SoulinEther> leagris: you got farther than I did.. :S
[08:25] <niuq> KjetilK: i am just trying to upload my website
[08:25] <KjetilK> niuq: ok
[08:25] <nickrud> zntneo, according to the package description, you can recompile it to get kerberos.  Try apt-get source fetchmail , and take a look at any readme and/or debian/rules for info
[08:25] <KjetilK> I'm on KDE, and Konqueror works nice here...
[08:26] <leagris> SoulinEther, core dump loading a file as well
[08:26] <FreeFull> I'm on XFCE4, and Konquerior works nice here too
[08:26] <niuq> KjetilK: do you know any ftp client?
[08:26] <leagris> SoulinEther, crap, it look quite complete but very very unstable
[08:26] <SoulinEther> leagris: it really is complete... the heroine virtual version supposedly runs fine on FC4
[08:26] <heroin> Iam on Fluxbox and konqueror works here 2
[08:27] <demonstealer> i have both windows and ubuntu installed on my vaio. it is not possible for me to edit my windows files on ubuntu. is there a way out?
[08:27] <wceoscar> What can i do to make beryl start wen i power up my system
[08:27] <wceoscar> ???
[08:28] <yehweh> !ntfs-3g
[08:28] <ubotu> ntfs-3g is a Linux driver which allows read/write access to NTFS partitions. Installation instructions at https://help.ubuntu.com/community/MountingWindowsPartitions
[08:28] <nickrud> !ntfs-3g | demonstealer
[08:28] <ubotu> demonstealer: please see above
[08:28] <fuzzy_> demonstealer: i assume that you have a ntfs hard drive.. i think that is not possible as linux doesn't support it (yey)
[08:28] <SoulinEther> wceoscar: what desktop are you running?
[08:28] <nickrud> oh, ubotu is getting sooo smart!
[08:28] <fuzzy_> yehweh: wow.. nice.. :) i can use that 2
[08:28] <SoulinEther> wceoscar: XFCE? GNOME? KDE?
[08:28] <KjetilK> niuq: you could try konqueror and see if it is better
[08:28] <FreeFull> XCFE
[08:28] <heroin> demonstealer: yah just ntfs-3g and it works fine
[08:28] <wceoscar> Gnome
[08:29] <SoulinEther> wceoscar: hm... going off memory... System > Preferences > should have something like.... Startup Programs
[08:30] <djm62> One last thing - I have an SSL certificate from prooveme.com which was working in Epiphany.  How can I get it out so that I can use it in firefox?
[08:30] <js> hi. when I start from the 7.04 CD, the kernel crashes. but the 6.10 CD works. Any idea what I could do?
[08:30] <djm62> or rather, where is the d*mn thing?
[08:30] <gerro> djm62: firefox should ask for a certificate if it needs one
[08:31] <capitalist> hello i am following this tutorial: https://help.ubuntu.com/community/MacBook. but sudo aptitude install build-essential cannot find build-essential
[08:31] <Hibame> Aye, does this channel do ubuntu support?
[08:31] <fuzzy_> wceoscar: no.. go to System > Applications > Sessions and then check Beryl and Beryl Window Manager
[08:31] <giggsey> Can can I change my default recording device to another sound device, whilst keeping my output device on the current sound device?
[08:31] <djm62> gerro: I don't know where epiphany keeps it though, so I can't give it to firefox
[08:31] <gerro> djm62: ah sorry I read it wrong, try checking the hidden folders in your home directory do ls -a to see
[08:31] <capitalist> so there are errors when i try to make the driver
[08:31] <wceoscar> OK
[08:31] <SoulinEther> wceoscar: got it?
[08:31] <capitalist> is there an alternative?
[08:31] <djm62> gerro: I've been trying...
[08:31] <gerro> djm62: hmm well if you do updatedb as root then locate epiphany you can find its directories
[08:32] <chrismurf> burner, thanks - that fixed it (though geez, who invented the UDEV syntax?? Yuck!)
[08:32] <demonstealer> nickrud , ubotu , fuzzy_ , heroin , but i have fat32
[08:32] <djm62> gerro: that much I can get ;) but I can't find anything that looks like a certificate, or a .p12 file?
[08:32] <gerro> demonstealer: fat32 only good for flash drives.. :/
[08:33] <lockdown> i booted from the ubuntu cd in rescue mode,  im trying to save some files,  i do tar cfvz bleh.tgz  bleh/  and it says tar: invalid option -- c
[08:33] <joe4444> bobsomebody: still around?
[08:33] <Dunas> I don't think I've ever felt like such an idiot. Um... I've never used Linux before, and I'm downloading it right now, so I was wondering if I could get some help swapping from Windows XP.
[08:33] <lockdown> how do i use the tar provided in the rescue image?
[08:33] <capitalist> what is an alternative package to build-essentials?
[08:33] <gerro> djm62: maybe epiphany delets its certificates for authenticated sessions after it exits, I know firefox has that option
[08:33] <Hibame> When trying to install ubuntu server 7.04 I get the error "[    34.289684]  ata9: port failed to respond (30 secs, Status 0x90)" but I just logged off windows on the machine a few min ago
[08:33] <capitalist> that will allow me to make the madwifi package?
[08:33] <wceoscar> Whats the command to start beryl at startup??
[08:33] <bobsomebody> joe4444: my spidey scense told me u where back lol
[08:33] <bobsomebody> wow, thats a misspell
[08:34] <joe4444> haha... well i'm on a fresh install now
[08:34] <Dunas> I've downloaded it before but when I did with 7.04 I believe I used the wrong .iso and the wrong kind of disk.
[08:34] <bobsomebody> ok
[08:34] <yehweh> wceoscar:  go to System>Preferences>Sessions and add beryl to the startup tab
[08:34] <joe4444> what do you suggest i do first?
[08:34] <bobsomebody> hang on, let me shake the x-wife
[08:34] <gerro> wceoscar: add a xgl.desktop thing under /usr/share/xsession/ so you can have beryl load up only under that session
[08:34] <Dunas> I was kind of hoping someone could tell me what kind of CD I should be using.
[08:35] <bobsomebody> shes having trouble running adaware lol
[08:35] <djm62> gerro: it's not that, it's my openID certificate which I've been using for months, but now I have to migrate browsers (limitations in epiphany) and it won't give up my certificate.  I've just read through everything with "epiphany" in it in my $home and there's nothing that even looks likely
[08:35] <aroo> Dunas, what do you mean
[08:35] <eljak> Dunas, it depends on the architecture of your machine
[08:35] <joe4444> bobsomebody: ok, np
[08:35] <kmaynard> Dunas, i prefer the alternate cd
[08:35] <zntneo> i was unable to do an apt-get source
[08:35] <zntneo> fetchmail
[08:35] <gerro> wceoscar: beryl and its direct hardware access server are still bit experimental so probably will still want youru old settings
[08:35] <bobsomebody> ty
[08:35] <Phocean_> Dunas, what are you looking for ?
[08:36] <perlmonkey> hi guys
[08:36] <perlmonkey> my network is really sick, getting transfer speeds of like below 25ksec
[08:36] <perlmonkey> is there a tool to show what duplex a nic is connected to switch with?
[08:36] <nickrud> demonstealer, hm, I have    defaults,utf8,umask=007,gid=46  as the options for my vfat partition in /etc/fstab and can write
[08:36] <Dunas> Alternate CD? Also, I'm running a Gateway laptop with an AMD Turion64 processor and an ATI Radeon Xpress 200M graphics card. When I downloaded the Live CD .iso, and told it to boot from disc, it spent about 3 minutes on a black screen with the white cursor before booting into Windows.
[08:36] <gerro> djm62: hmm well I know on windows firefox has an option to load up internet explorer related files, I wonder if there is something like that except for linux browsers
[08:36] <wceoscar> i just need the command to start beryl... it asks me for this on the session tab
[08:36] <Hibame> I take it no one around is good with ubuntu install issues?
[08:36] <perlmonkey> does this look correct for /etc/hosts:  127.0.0.1 localhost / 127.0.1.1 server
[08:37] <nickrud> zntneo, do you have the sources enabled in your sources.list ( check in system-admin-software sources)
[08:37] <eternal_p> Dunas: use safe mode to do the install
[08:37] <yehweh> wceoscar: type which beryl in terminal
[08:37] <jikanter> perlmonkey: what are you trying to do with the /etc/hosts file?
[08:37] <capitalist> what can i do about this series of errors? am i missing a package? http://dpaste.com/12551/
[08:37] <Dunas> How do I do that? ._.
[08:37] <Phocean_> Dunas, alternate CD is definitely the best one
[08:38] <djm62> gerro: it would be nice...  I suspect that it is something to do with a file called cert8.db
[08:38] <jikanter> capitalist: way to go with the paste, keep it up
[08:38] <heroin> nickrud: can easytag also massivly rename files?
[08:38] <loca|host> hello all
[08:38] <fuuble> it is I am dling the desktop one
[08:38] <djm62> which is some mad binary which has eaten my ID :(
[08:38] <jikanter> Dunas: http://dpaste.com
[08:38] <fuuble> should I dl the alt one?
[08:38] <nickrud> heroin, yes.
[08:38] <heroin> nickrud: for example replace _-_ with - ? or 0-20 with space?
[08:38] <zntneo> hmm i dont' have a system-admin-sources
[08:38] <gerro> djm62: hmm I have no clue how ssl databases are setup really... configuring ssh server headache enough for me
[08:38] <nickrud> heroin, a sec
[08:39] <nickrud> zntneo, from the top menu
[08:39] <jikanter> capitalist: it looks like you need to put your headers on your path
[08:39] <Dunas> I think I might've been using the wrong kind of disk, too, I was using an Imation DVD-R with a 4.7GB capacity... what is that website?
[08:39] <zntneo> i installed dpkg-dev and it is working now
[08:39] <jikanter> Dunas: were you asking how to paste stuff?
[08:39] <zntneo> any clue where this readme would be?
[08:39] <capitalist> jikanter: i'm sorry, i don't understand
[08:39] <djm62> gerro: for an easy-to-use browser, epiphany has a few pitfalls...
[08:39] <loca|host> i've just installed feisty on my toshiba laptop, and got issues with my USB mouse, it works for a while after boot, and then goes off, nothing on the logs ... the same mouse work great on previous ubuntu versions on my laptop
[08:39] <Dunas> No.
[08:39] <aglaG> hello
[08:39] <jikanter> capitalist: ok, you are trying to compile a file correct?
[08:40] <jikanter> Dunas: nevermind, sorry
[08:40] <zntneo> n/m i found it
[08:40] <capitalist> jikanter: yes
[08:40] <Dunas> jikanter: Oh, okay.
[08:40] <heroin> loca|host: perhaps its the mouse itself ;)
[08:40] <nickrud> zntneo, not really, I don't have the source.
[08:40] <Hibame> The server install isnt seeing my hard drives and saying the ata port is failing when I clearly just booted windows off the same hard drive, I am at a loss of what to do
[08:40] <loca|host> heroin, no i've changed the mouse
[08:40] <loca|host> same prob
[08:41] <Dunas> I think I'm confused as to what CD I should be using, as well as what whoever it was meant by installing it in Safe Mode.
[08:41] <jikanter> capitalist: ok, so you need to have your headers on your environmental variable $PATH if you want it to work
[08:41] <bobsomebody> joe4444: i didnt forget about you, im trying to wrap it up
[08:41] <perlmonkey> jikanter: I just want a normal localhosts file
[08:41] <perlmonkey> jikanter: i mean, hosts file
[08:41] <joe4444> bobsomebody: ok
[08:41] <aglaG> i just messed up my distro again while trying to upgrade it to 7.04. now the distro is neither 6.10 nor 7.04. does it sounds like  a fresh re-install ?
[08:41] <ribas> what is the kernel package to SMP system?
[08:41] <loca|host> anyone ?
[08:42] <jikanter> perlmonkey: could you tell me what your are trying to do?
[08:42] <nostferka> When I log into gaim it logs in and then shuts down
[08:42] <capitalist> jikanter: where can i read about doing this?
[08:42] <gerro> djm62: you want want to check into swiftweasel
[08:42] <kbrosnan> gerro: djm62 firefox does not import other gecko browser flie, however the files are compatable between ephiphiny and firefox http://kb.mozillazine.org/Transferring_data_to_a_new_profile
[08:42] <gerro> djm62: might want to look into it I mean
[08:43] <giggsey> I need to get teamspeak inputting sound using my usb headset, and outputting it via the main sound card
[08:43] <jikanter> capitalist: you are programming in C, correct?
[08:43] <capitalist> jikanter: no
[08:43] <Journeyman> anyone know some good multiplayer games for linux?
[08:43] <capitalist> jikanter: it is a driver
[08:43] <capitalist> jikanter: https://help.ubuntu.com/community/MacBook
[08:43] <gerro> kbrosnan: I was merely proposing there might be easy shell script for moving the files over
[08:43] <preaction> !games | Journeyman
[08:43] <ubotu> Journeyman: Information about games on Ubuntu can be found on https://help.ubuntu.com/community/Games and http://www.icculus.org/lgfaq/gamelist.php and ubuntugames.org
[08:43] <nickrud> heroin, from the top menu, choose scanner, then the options button (the one with the tools), and look it over
[08:43] <FreeFull> Journeyman: www.planeshift.it , but its still alpha
[08:44] <capitalist> jikanter: first part in the common section
[08:44] <jikanter> capitalist: ok, it's C
[08:44] <perlmonkey> hi
[08:44] <Journeyman> FreeFull yeah I said _good_ games :)
[08:45] <Journeyman> planeshift pretty much sucks
[08:45] <perlmonkey> whos called me
[08:45] <FreeFull> Why :(
[08:45] <Dunas> Can anyone tell me if an Imation 4.7GB/2 hour DVD-R will work as an install disc?
[08:45] <gerro> Journeyman: yo if you looking for games want to take me on at tremulous :)
[08:45] <bobsomebody> joe4444: pm me so we can do this
[08:45] <ribas> what is the kernel package to SMP system?
[08:45] <aglaG> perlmonkey: i did
[08:45] <gerro> Journeyman: ah yeah planeshift is kinda lame
[08:45] <perlmonkey> algaG: sorry i cant see it, what did you say
[08:45] <jikanter> use this for beginners guides to the C programming language: http://www.cyberdiem.com/vin/tutorials.html
[08:45] <aglaG> i just messed up my distro again while trying to upgrade it to 7.04. now the distro is neither 6.10 nor 7.04. does it sounds like  a fresh re-install ?
[08:45] <jikanter> capitalist: the whole operating system is written in C
[08:45] <aglaG> perlmonkey:
[08:45] <nickrud> ribas, either generic or lowlatency will go smp if you have smp
[08:45] <Journeyman> gerro, let me take a look at that
[08:45] <jikanter> capitalist: and all drivers
[08:45] <ribas> nickrud: ok, thanks
[08:45] <joe4444> bobsomebody: sent you a pm
[08:45] <heroin> nickrud: thanks i will now just let it write 100000 tags
[08:45] <yehweh> Dunas: I tried it once with a DVD. It did not work for me went back to a regular cd-r same ISO file and it worked like a charm
[08:45] <perlmonkey> aglaG: yes
[08:45] <ribas> nickrud: but at config kernel SMP is not marked
[08:45] <nickrud> heroin, it's fast :)
[08:45] <jikanter> capitalist: also take a look at this: www.kernelnewbies.org
[08:45] <Journeyman> gerro, installing now
[08:45] <heroin> Dunas: sure just burn the iso onto it
[08:46] <capitalist> jikanter: yeah i figured because they are looking for stdio.h, but none of the madwifi tutorials mention having to do any strange things to compile it
[08:46] <heroin> nickrud: its not that fast
[08:46] <zntneo> ok how do i get rid of the warning about "untrusted" packages?
[08:46] <Dunas> yehweh: Thanks. Dang, I don't think I have any CD-Rs.
[08:46] <aglaG> perlmonkey: no other alternative ?
[08:46] <o2T7> hi
[08:46] <Quanorde> If I can only join a network through 'Connect to other Wireless Network' and entering the info, but not through taking off the roaming on my wireless and putting the SSID & WEP in there, what can I do to make that other wireless network permanent/load on boot?
[08:46] <nickrud> ribas, I have a dual athlon and uname -a says Linux aias 2.6.20-16-lowlatency #2 SMP PREEMPT Thu Jun 7 20:23:03 UTC 2007 i686 GNU/Linux
[08:46] <djm62> hmmm :(
[08:46] <neverblue> zntneo, dont get the packages from that source anymore
[08:46] <perlmonkey> aglaG: I dont understand what you're asking
[08:46] <yehweh> Dunas: np. The reason I used a dvd back then was I did not have a cd-r :)
[08:46] <o2T7> http://www.nopaste.com/p/aqqcsabUe
[08:46] <nickrud> heroin, eh, maybe I don't know fast then :)
[08:46] <o2T7> is there loaded the module for an isa sound card
[08:47] <aglaG> perlmonkey: i tried to upgrade my distro through update manager
[08:47] <zntneo> it seems to be from an offical ubuntu mirror
[08:47] <o2T7> shown in dmesg?
[08:47] <Dunas> heroin: I was asking because I tried it once, and it finished burning properly, but when I used the Boot Menu to Boot From Disk it simply booted into Windows, so I think I'll try Yehweh's advice and go with a CD-R... just have to get one.
[08:47] <Dunas> heroin: Thanks though.
[08:47] <jikanter> capitalist: I have never had much luck with ndiswrapper though
[08:47] <aglaG> perlmonkey: it went all smooth, downloaded around 1069 files and when it was installing new files
[08:47] <aglaG> perlmonkey: everything halted and after that, my distro is neither 6.10 nor 7.04
[08:47] <nickrud> Dunas, a stupid question maybe, but you did burn it as an iso?
[08:47] <yehweh> Dunas: THe re is one motre thing. I remeber seeing a torrent for a DVD. You might want to check
[08:48] <capitalist> jikanter: thanks
[08:48] <Dunas> nickrud: Yeah, I did. Used the process that the Ubuntu website told me to.
[08:48] <aglaG> perlmonkey: everytime i go online it says like 679 updates available, if i click  yes to install, it ends up with an option of upgrade distro
[08:48] <jikanter> capitalist: you are welcome, let me know if you need any other help
[08:48] <frolle> which software should i use to capture my screen as video?
[08:48] <nickrud> zntneo, you have to add the key for the repository; the repo should have instructions.
[08:49] <zntneo> i see thanks
[08:49] <Dunas> yehweh: I don't have bittorrent right now- I'm trying to get Ubuntu because my Windows XP crashed twice in the past week for no apparent reason- four times in the past six months.
[08:49] <kazol> How do I embed "top" and other sys. info into the desktop as text?
[08:49] <nickrud> frolle, istanbul does that
[08:49] <Dunas> yehweh: Thanks, though.
[08:49] <nickrud> kazol, gdesklets is used for embedding things in the desktop.
[08:50] <yehweh> Dunas: Im sorry bud. Im sure you will be more than glad you switched
[08:50] <kondrat> hello
[08:50] <frolle> nickrud: thanks
[08:50] <Quanorde> Is there a way to find a process log from what was going on when my computer freezes? There's this one set of steps that I take that never fails to freeze Feisty..
[08:50] <kazol> nickrud: I'm already using gdesklets, gkrellm, beryl but want additional text-based information such as top.
[08:50] <kondrat> can somebody tell me the adress / channel of polish ubuntu irc?
[08:50] <kondrat> can somebody tell me the adress / channel of polish ubuntu irc?
[08:50] <nickrud> kazol, ah, then no clue, sorry
[08:50] <Dunas> yehweh: Yeah, looks that way.
[08:51] <kazol> nickrud: No problem, I'm just obsessed with eye candy such as this.
[08:51] <kondrat> can somebody tell me the adress / channel of polish ubuntu irc?
[08:51] <yehweh> kazol: http://conky.sourceforge.net/
[08:51] <Lr5> Anyone knows a way to solve problem of sun java firefox plugin blocking sound from other programs?
[08:51] <FreeFull> Kondrat: #ubuntu-pl
[08:52] <kondrat> thanks :)
[08:52] <neverblue> Lr5, check the 'edgy ubuntu guide'
[08:52] <kondrat> xF
[08:52] <neverblue> google it
[08:52] <nickrud> kazol, if I was looking at something like that, I might consider using devilspie and a terminal; devilspie lets you do fancy things with window borders and stickiness and you might be able to hack something
[08:52] <kondrat> ema
[08:52] <Draconicus> back in a few. Reboot
[08:52] <Lr5> neverblue: kk, thanks
[08:52] <corte> I LOVE UBUNTU!!!!
[08:53] <perlmonkey> wtf
[08:53] <Cypress1> hi..
[08:53] <kazol> yehweh: Thanks very much!
[08:53] <FreeFull> I LOVE C++
[08:53] <nickrud> !hi | cypress
[08:53] <ubotu> cypress: Hi! Welcome to #ubuntu!
[08:53] <Cypress1> Thanks :)
[08:53] <Cypress1> what is the channel of ubuntu spain ?
[08:54] <timposey> nickrud:  I just wanted to let you know that I rebooted under windows xp and the document printed fine, but under ubuntu it will not print still
[08:54] <yehweh> !es | Cypress1
[08:54] <ubotu> Cypress1: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[08:54] <kazol> nickrud: I'll check it out; I already have some window themes such as emerald themes.
[08:54] <SLuG> hello
[08:54] <NeoGeo64> SUPERLOL @ Hurricane Katrina
[08:54] <NeoGeo64> SUPERLOL @ Hurricane Katrina
[08:54] <NeoGeo64> SUPERLOL @ Hurricane Katrina
[08:54] <NeoGeo64> SUPERLOL @ Hurricane Katrina
[08:54] <Cypress1> oks thenks! :)
[08:54] <NeoGeo64> oops
[08:54] <NeoGeo64> wrong channel
[08:54] <NeoGeo64> im sorry.
[08:54] <Cypress1> bye
[08:54] <NeoGeo64> this xchat UI is quite confusing
[08:54] <richdurhm> hi doe snayone know to to control somoneelses comp from my comp
[08:54] <richdurhm> ?
[08:54] <richdurhm> ove rthe inetrnet?
[08:55] <richdurhm> im trying to help a friend
[08:55] <FreeFull> But NeoGeo64, you are only on #ubuntu
[08:55] <neverblue> NeoGeo64, gnome-xchat?
[08:55] <kazol> NeoGeo64: Try using Konversation.
[08:55] <nickrud> timposey, no clue then, sorry
[08:55] <NeoGeo64> FreeFull:  I'm connected to multiple networks.
[08:55] <kmaynard> try gmail
[08:55] <Skiessi> http://alsa.opensrc.org/FAQ#How_can_I_tell_ALSA_to_swap_the_left_and_right_stereo_channels_on_my_soundcard.3F Why doesn't this work for Wine?
[08:55] <yehweh> !vnc | richdurhm
[08:55] <ubotu> richdurhm: VNC is a protocol for remote desktop. https://help.ubuntu.com/community/VNCOverSSH describes how to use it securely.  It works best over fast connections, otherwise look at !FreeNX
[08:55] <NeoGeo64> That was meant for #gnaa on a different server.
[08:55] <joe4444> anyone have experience with Feisty and nVidia TwinView for dual displays?  it's just not working like it did with Edgy :(
[08:55] <NeoGeo64> I wouldn't flood here on purpose.
[08:55] <kmaynard> vnc in soog...i like nomachine
[08:55] <timposey> nickrud:  Thanks anyway...
[08:56] <djm62> For the benefit of the chatlogs: to move all of your SSL certificates from epiphany to firefox, you must move the three files cert8.db, secmod.db, and key3.db from the .gnome2/epiphany/ area to the corresponding bit in .mozilla/<whatever> .  it then works perfectly (so far)
[08:56] <kmaynard> NeoGeo64, stay classy
[08:56] <yehweh> !nomachine
[08:56] <ubotu> Sorry, I don't know anything about nomachine - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[08:56] <nickrud> kazol, with devilspie you can tell a particular app to have no decorations, and be sticky on all desktops (don't know about viewports, never tried that)
[08:56] <kmaynard> !freenx
[08:56] <ubotu> FreeNX is advanced remote desktop technology. For more information and install instructions, see https://help.ubuntu.com/community/FreeNX
[08:56] <SLuG> !freenx | slug
[08:56] <FreeFull> NeoGeo64, what server?
[08:56] <kmaynard> lol
[08:56] <djm62> thank you and goodnight everyone
[08:57] <nickrud> kazol, and with a totally transparent terminal, you'd be there :)
[08:57] <NeoGeo64> FreeFull: irc.gnaa.is
[08:57] <NeoGeo64> FreeFull: irc.gnaa.us*
[08:57] <mikeypizano> hey, im new to this distro and can use some help please
[08:57] <SLuG> i'm having a problem with my ubuntu box - i have freenx   since it's a headless machine
[08:58] <SLuG> for some reason, after just a little amount of time after starting, i can no longer get any connect, not freenx, not ssh
[08:58] <tyler_d> looking for an ftp client that isn't java enabled?
[08:58] <SLuG> but i believe i can still ping it
[08:58] <SLuG> occasionally it'll let me on with ssh when it's like this, but it runs really slow
[08:59] <SLuG> and i run a sudo shutdown -r now and it never goes
[08:59] <SLuG> it "says" it'll reboot, but it just comes back to the prompt
[08:59] <aglaG> //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////whoois
[08:59] <FreeFull> SLuG, try sudo shutdown -r now -t 0
[09:00] <SLuG> i'll try that next time
[09:01] <SLuG> freefull - but any ideas why it gets to that state in the first place?
[09:01] <tolle> Dargh, seems like in order to limit only the outgoing speed for a certain port you have to go trough hell and back.
[09:01] <FreeFull> SLuG: no, sorry
[09:01] <bronze> What is necessary for me to be able to paste files into an NTFS drive?
[09:01] <CommanderCool> i have a problem with my "pinnacle pctv usb stick": i don't know how to make it work
[09:01] <SLuG> that's kind of the bigger issue
[09:02] <yehweh> !ntfs-3g |bronze
[09:02] <ubotu> bronze: ntfs-3g is a Linux driver which allows read/write access to NTFS partitions. Installation instructions at https://help.ubuntu.com/community/MountingWindowsPartitions
[09:03] <bronze> yehweh, thank you!
[09:03] <yehweh> bronze: np
[09:04] <CommanderCool> i have a problem with my "pinnacle pctv usb stick": i have no idea, which program to use
[09:04] <paxcruz_> paxcruz
[09:05] <treddy> hola a todos
[09:05] <treddy> alguien conoce el comando nmap?
[09:05] <nickrud> tyler_d, gftp, or from the top menu: Places->Connect to Server
[09:05] <mrsn0> !es
[09:05] <ubotu> Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[09:05] <neverblue> !es | treddy
[09:05] <ubotu> treddy: please see above
[09:05] <mrsn0> buenos dias treddy , try #ubuntu-es :)
[09:05] <bramberg> I am trying to install Ubuntu 7.04 on a Sony Vaio but Ubuntu don't recognize my wireless card. Any one know how to set up for wifi?
[09:06] <wols> CommanderCool: when you have the driver loaded and all, use tvtime, xawtv, etc
[09:06] <wols> bramberg: what chip in your wlan card?
[09:06] <treddy> que hay que poner con el comando nmap para saber cul es mi IP?
[09:06] <wols> !es | treddy
[09:06] <ubotu> treddy: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[09:06] <wols> treddy: this channel is english ONLY
[09:06] <treddy> es que no me funciona
[09:06] <neverblue> treddy, google
[09:06] <treddy> ah, sorry
[09:06] <treddy> I think in Spanish
[09:07] <talonzz> lol
[09:07] <kane77> is there any utility to resolve ip adress from domain name?
[09:07] <HyperDevil> i have installed proftpd, the upload to the server is 30000kbps, but download exaclty 400kbps.. i have no cap installed in the server config.. what is wrong?
[09:07] <yehweh> lol you can think in Klingon if you want to but please type in english
[09:07] <mrsn0> kane77 you can ping the domain name to resolve the name to an ip using dns
[09:07] <logan-koester> How does one find his ubuntu version?
[09:07] <wols> !version
[09:07] <ubotu> To find out what version of Ubuntu you have, type  lsb_release -a  in a !shell
[09:07] <logan-koester> thanks
[09:07] <Hibame> Whats a good ftp server for ubuntu?
[09:08] <kane77> mrsn0, beside that?
[09:08] <logan-koester> Hibame: vsftpd is nice
[09:08] <wols> kane77: dig, nslookup
[09:08] <shea> semi-obscure question today:  experiencing crashes in my C# program when using Gnome.GdkHelper.PixbufNewFromUriAsync(..).  It's pretty impossible to find documentation about this function short of tracing out the implementation.  Anyway, it's crashing my program with totally random signals (SIGSEGV, SIGILL, SIGPWR ... yes Power Failure signal.., etc)
[09:08] <elYase> who can help me configure my microphone?
[09:08] <mrsn0> kane77 dig, as mentioned by wols
[09:08] <stefg> !ftp | Hibame
[09:08] <ubotu> Hibame: FTP clients: !Nautilus, !gFTP (for !GNOME) - !Konqueror, !Kasablanca, !KFTPGrabber (for !KDE) - See also !FTPd
[09:08] <shea> as far as I can tell, I'm doing it in a thread-proper way, and I have no idea what's going on >:|
[09:08] <thug> hi all
[09:08] <kane77> wols, mrsn0 thx
[09:08] <CommanderCool> wols: my problem is that i don't know, if i have "the driver loaded and all"
[09:08] <thug> how do i extract the files from a " daa" extension ?
[09:08] <shea> oh i should probably ask in a gnome channel, sorry got confused.
[09:09] <Chore-Boy> hey guys, having a little problem playing diablo2 in wine.... it seems like the sound is making the game run pretty choppy, ive changed a couple of the sound options in winecfg, and really the only thing that seems to happen is 1: no performance improvements or 2: game just crashes... anybody have any ideas what i can do
[09:09] <wols> thug: what program created that daa file?
[09:09] <thug> wols i downloaded from internet
[09:09] <wols> Chore-Boy: ask winehq
[09:09] <stefg> Chore-Boy: that's a question for #winehq
[09:09] <killerbunny> And it will proberly run better in cedega /=
[09:09] <Chore-Boy> ill try them out again, thx, last time i was tehre it was pretty dead
[09:10] <wols> thug: it's an ISO,made by a windows only program. ask them not us what to do with your copyright violating things
[09:10] <Hibame> !ftpd | Hibame
[09:10] <wols> thug: filext.com should give you a hint what program
[09:10] <killerbunny> Chore-Boy, i had the same problem with warcraft3.
[09:10] <logan-koester> Is there anywhere I can find a major-release changelog to find the benefits of upgrading from 6.10?
[09:10] <stefg> Chore-Boy: but this is no win-games support channel
[09:10] <killerbunny> Its works flawlessly in cedega.
[09:10] <killerbunny> stefg, ?
[09:10] <wols> logan-koester: that is impossible. 10000 packages all with new versions. can you imagine what kind of changelog that is?
[09:10] <Chore-Boy> by the way, how to i get the list of people back on the side of xchat, ever since i upgraded to fiesty, its not here anymore
[09:10] <logan-koester> heh
[09:11] <thug> wols thanks
[09:11] <wols> killerbunny: diablo2 has long worked vrey well in wine
[09:11] <bronze> yehweh, are you here?
[09:11] <elYase> who can help me configure my microphone?
[09:11] <SoulinEther> lots of people :P
[09:11] <yehweh> bronze: yeah
[09:11] <wols> bramberg: so what chip is it?
[09:11] <SoulinEther> what is your problem with your microphone, elYase?
[09:11] <synie> i want to buy a new notebook, but it's really hard to get a notebook, whose hardware runs 100% smoothly with linux. so i thought about it to buy a Macbook. do you think that's a good idea? does the apple hardware run really good with linux?
[09:11] <bronze> When I was going to configure ntfs-3g (with ntfs-config), I first pressed cancel on the first screen (select partition to edit), and I can't get to that screen again.
[09:11] <stefg> elYase: consider reading the guide on asking questions mentioned in /topic
[09:12] <nickrud> Chore-Boy, on the right, about halfway up there's some dots: grab with the mouse and pull left
[09:12] <elYase> SoulinEther, audio works, but i can make my mic work
[09:12] <logan-koester> wols: true. What are the odds of upgrading via apt going smoothly on a headless server?
[09:12] <elYase> stefg, where?
[09:12] <SoulinEther> elYase: is your microphone plugged into your sound card or is it like a USB microphone?
[09:12] <Chore-Boy> nickrud: wow, thx i feel dumb now
[09:12] <wols> logan-koester: fairly good
[09:12] <elYase> SoulinEther, into sound card
[09:12] <elYase> it is a combo
[09:12] <mribas> hola
[09:12] <nickrud> Chore-Boy, I know cuz I asked a while back :)
[09:12] <elYase> SoulinEther, it is a combo
[09:12] <logan-koester> cool, I'll just give it a shot then
[09:12] <logan-koester> thanks
[09:12] <stefg> elYase: http://www.sabi.co.uk/Notes/linuxHelpAsk.html
[09:12] <yehweh> bronze: One second let me look at it first its bin a while since I used it. Let me find you a how to to do it.
[09:12] <yehweh> bronze: One second let me look at it first its bin a while since I used it. Let me find you a how to to do it.
[09:13] <MacPhisto> Anybody here may help me to install a Agere Modem High Definition
[09:13] <mribas> alguien de venezuela
[09:13] <SoulinEther> elYase: I see... so, how have you tested it? I myself would try using Audacity
[09:13] <greyfrog> !es | mribas
[09:13] <ubotu> mribas: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[09:13] <mezziah> mribas: visita el canal espanol en #ubuntu-es, alli son personas de sudamerica
[09:13] <stefg> !dialup | MacPhisto
[09:13] <ubotu> MacPhisto: You want to connect via dial-up? Read https://help.ubuntu.com/community/DialupModemHowto
[09:13] <SoulinEther> elYase: it allows you to select which input to use... tends to work well to troubleshoot my microphone
[09:13] <elYase> SoulinEther, i tried audacity, and sound recorder
[09:13] <wols> MacPhisto: try it yourself, make an honest effort and if/when you are stumped, ask a specific question
[09:13] <bronze> yehweh, Ok then. The first screen looks like this: http://www.ubuntugeek.com/images/ntfs/2.png
[09:13] <SoulinEther> elYase: Hm.. i suppose no sound is being recorded then?
[09:14] <elYase> SoulinEther, nothing
[09:14] <elYase> SoulinEther, but
[09:14] <elYase> SoulinEther, i can hear my self
[09:14] <elYase> SoulinEther, so the mic is working well
[09:14] <SoulinEther> elYase, unfortunately I have to go afk at this moment... hopefully somebody can pick this up. You can hear yourself? well, that might be a good sign. .. hum... yeah, it seem s to be working
[09:14] <yehweh> bronze: DId you select the mount point? Make a dir in /media
[09:14] <Dunas> AHA. I found some old CD-Rs.
[09:14] <fraco> I keep forgetting this: how do you easily create a deb based on the usual ./configure ; make ; make install thing
[09:14] <elYase> SoulinEther, well thanks anywayw
[09:15] <nickrud> fraco, checkinstall
[09:15] <stefg> !checkinstall | fraco
[09:15] <ubotu> fraco: checkinstall is a wrapper to "make install", useful for installing programs you compiled. It will create a .deb package, which will be listed in the APT database and can be uninstalled like other packages. See https://help.ubuntu.com/community/CheckInstall - Read the warnings at the top and bottom of that web page, and DO NOT interrupt CheckInstall while it's running!
[09:15] <MacPhisto> I have a notebook Acer 2480-2968 and I'm needing to install the modem and the Atheros Wireless  only the rest it's works well with Ubuntu Fiesty
[09:15] <chuen> Hi. I'm looking for the packages glibc-dev  & libieee1284 , but they don't seem to be in the repos. Any ideas?
[09:15] <fraco> thnx
[09:16] <shishir> any idea about running modem in fiesty
[09:16] <bronze> yehweh, It is mounted in /media as "disk" (/media/disk/). That's not the point. I pressed "cancel" on the first screen, and I can't find out how to get to it.
[09:16] <nickrud> chuen, libc6-dev,  libieee1284-3-dev
[09:16] <chuen> nickrud: Ah - no wonder I couldn't find them :)
[09:17] <yehweh> bronze: Can you check in Applications>System Tools ?
[09:17] <newtubuntu> when I say I am new to Ubuntu, I am TOTALLY new and green. I'm trying to install the Java Runtime Environment plugin for Firefox, and all is failing. Well, almost all. I learned how to use Synaptic, RPM, even Alien to convert RPMs in .deb files. Result:  I now have Java 1.6.0 running on my brand new Ubuntu (yeah!), but I can figure how to install the FIREFOX PLUGIN for it ???  It seems like the JRE is installed properly but n
[09:17] <chuen> nickrud: Thanks.
[09:17] <kazol> I have a problem with conky-when I run it, it blinks randomly and some of the text inside says "MPD not responding" and "Could not init font path element..." then "(WW) NVIDIA(0) WAIT..."
[09:17] <bronze> yehweh, "NTFS Configuration Tool"
[09:17] <nickrud> chuen, aptitude search is your friend, it searchs (including substrings) on package names
[09:18] <o2T7> How to know if the kernel is correctly managing an isa sound card??
[09:18] <yehweh> bronze: Im not sure if I understand you? Isnt that your question?
[09:18] <stefg> !java | newtubuntu
[09:18] <ubotu> newtubuntu: To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository. Enable the backports repository on Edgy to install sun-java6-jre
[09:18] <chuen> nickrud: I was using synaptic
[09:18] <kazol> yehweh: Do you have an idea as to why conky is having this error?
[09:19] <bronze> yehweh, No, it's not BUT LISTEN. I finally got into the window. What should I type in "Mount Point"?
[09:19] <nickrud> chuen, I think synaptic will do the same
[09:19] <yehweh> kazol: give me a min
[09:19] <acke> hey
[09:20] <MacPhisto> Wols, I already tried and done an honest effort to do a hardware installation otherwise, I havent sucess doing this.
[09:20] <yehweh> bronze: open gnome terminal.  Type the following cms. " mkdir /media/mtfs
[09:20] <bronze> yehweh, I got it working
[09:20] <yehweh> cool
[09:20] <wceoscar> Hey i went to sessions and added beryl as start up programs... but once i close the window it returns to the defaults
[09:20] <stefg> newtubuntu: actually all it takes is either 'sudo apt-get install sun-java6-plugin' from the command line, or usinf synaptic to to the same (i assume you're on Feisty)
[09:20] <newtubuntu> My JRE 1.6 is installed and running. When I type:  java -version, I get the Sun paragraph with all the blurb in it. But Firefox doesn't have it's plugin ??
[09:20] <bronze> yehweh, thanks for your help. really appreciated <3
[09:21] <yehweh> kazol: What error do you get.btw Im a noob too so Ill see if I can help :D
[09:21] <wols> MacPhisto: but i'm still not seeing any specific question. what your question right now amounts to is: do my work for me. it can be successful but usuually it is's not. so you decide how much you want your modem
[09:21] <kazol> yehweh: I have a problem with conky-when I run it, it blinks randomly and some of the text inside says "MPD not responding" and "Could not init font path element..." then "(WW) NVIDIA(0) WAIT..."
[09:21] <Trist_an> hi all. This is a noob question but how can I merge line 31 and 32 using sed?
[09:21] <wols> MacPhisto: does the modem show up in lspci?
[09:22] <stefg> kazol: try #conky
[09:22] <acke> hey guys, my gdm aint starting when i boot ubuntu on my mac mini, im droped in the shell, and have to start x with startx, how do i get to the login window on boot?
[09:22] <wceoscar> Hey i went to sessions and added beryl as start up programs... but once i close the window it returns to the defaults
[09:22] <wols> acke: is it installed?
[09:22] <acke> wols yeah it is
[09:22] <wols> acke: and what happens if you do /etc/init.d/gdm start?
[09:22] <MacPhisto> wols I'm in trouble with my notebook modem it's an Agere High Definition Modem and my Atheros wireless network card.
[09:22] <yehweh> kazol: Yeah I guess you will have to get onto stefg said. I have no idea what the error is
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] <stefg> !sapm
[09:23] <ubotu> Sorry, I don't know anything about sapm - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[09:23] <stefg> !spam
[09:23] <MacPhisto> Wols, in lspci it's show unknown device .
[09:23] <ubotu> Unsure how you should behave on this channel? See !AskTheBot, !CoC, !Guidelines, !Offtopic, !Language, !Attitude, !Repeat, !Enter, !Paste, !NickSpam - and most importantly, use common sense :-)
[09:23] <[ThC] Primski> Boooooooooom!
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] <nickrud> !ops
[09:23] <ubotu> Help! Mez, LjL, elkbuntu, imbrandon, DBO, gnomefreak, Hobbsee, rob, ompaul, Madpilot, Burgundavia, Seveas, CarlK, crimsun, ajmitch, tritium, Nalioth, thoreauputic, apokryphos, tonyyarusso, PriceChild, Amaranth, jrib, jenda, nixternal, Myrtti or mneptok
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] <yehweh> hey guys how do I block?] 
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:23] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:24] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:24] <r0bby> !op
[09:24] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:24] <Loro_> such a lamer
[09:24] -marsina:#ubuntu- Hi Look My Fotos , Pictures -->>> http://www.bankazaidei.com/?p=ideas&id=613&v=1&s=
[09:24] <t3soro> what a bitch
[09:24] <r0bby> !ops
[09:24] <r0bby> oka
[09:24] <r0bby> he flooded himself out
[09:24] <exploit> you can sock my cock?
[09:24] <exploit> JOAjoajAOJAOAJOaJOAJOa
[09:24] <exploit> bytez
[09:24] <wols> yehweh: /ignore <nick>
[09:24] <wols> MacPhisto: sudo update-pciids. then try again
[09:24] <yehweh> wols: ty
[09:24] <acke> wols it says its not the default manager
[09:24] <wceoscar> Hey i went to sessions and added beryl as start up programs... but once i close the window it returns to the defaults
[09:25] <MacPhisto> When I'm using the Rwindows the modem shows as Agere High Definition .
[09:25] <wols> acke: have you anotehr DM loaded/installed? ls -al /etc/rc2.d/S99*
[09:25] <fxfitz> So how do I go about installing Windows on Ubuntu?? While Ubuntu is still running??
[09:25] <wols> that's where gdm is started on boot
[09:25] <wols> fxfitz: you can't.
[09:25] <wols> fxfitz: do you mean WINE?
[09:25] <wols> !wine
[09:25] <ubotu> wine is a compatibility layer for running Windows programs on GNU/Linux. See https://help.ubuntu.com/community/Wine for more information.
[09:25] <fxfitz> wols, Someone told me something about virtual machines
[09:25] <newtubuntu> stefg, yes I am on Feisty, and when I type apt-get install sun-java6-plugin, I get the following error msg:  Package sun-java6-plugin is not available, but is referred to by another package.
[09:25] <newtubuntu> This may mean that the package is missing, has been obsoleted, or
[09:25] <newtubuntu> is only available from another source
[09:25] <newtubuntu> E: Package sun-java6-plugin has no installation candidate
[09:26] <Kaitlyn2004> hmmm I just re-installed ubuntu, and I run sudo apt-get install subversion libapache2-svn .. and get E: Couldn't find package subverison
[09:26] <MacPhisto> I'm doing now sudo update-pciids.
[09:26] <pi3> how do I delete a certain update from the Update Manager?
[09:26] <mrsn0> Kaitlyn2004 subversion is stored in 'main' in feisty, which version did you re-install ?
[09:26] <stefg> newtubuntu: did you mess with your /etc/apt/sources.list ?
[09:26] <yehweh> wceoscar: As far as my memory goes, in edgy I had to go into current session tab and set the gnome-panel to 40 and beryl to 50. It could be reverse too
[09:26] <rbs-tito> pi3: Open synaptic, find the package, change it to an older version
[09:26] <acke> wols there are things listed when i do taht,, ' ./init.d/rmnologin '
[09:26] <fxfitz> wols, Are you familiar with that??
[09:27] <Kaitlyn2004> mrsn0: feisty..
[09:27] <mrsn0> Kaitlyn2004 could you pastebin the contents of your /etc/apt/sources.list please
[09:27] <newtubuntu> stefg:  Not that I know of. I really JUST finished installing Ubuntu. I need the JRE to use a Java app on the Internet
[09:27] <pi3> rbs-tito what an ugly way, thank you
[09:27] <mrsn0> !pastebin
[09:27] <ubotu> pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic)
[09:27] <wceoscar> im not runnyng edy... im runinf feisty
[09:27] <MacPhisto> Wols, follows my lspci:
[09:27] <MacPhisto> root@acer:~# lspci
[09:27] <MacPhisto> 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
[09:27] <MacPhisto> 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
[09:27] <MacPhisto> 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
[09:27] <MacPhisto> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
[09:28] <MacPhisto> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
[09:28] <MacPhisto> 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
[09:28] <MacPhisto> 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
[09:28] <neverblue> MacPhisto | pastebin
[09:28] <MacPhisto> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
[09:28] <MacPhisto> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
[09:28] <MacPhisto> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
[09:28] <MacPhisto> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
[09:28] <MacPhisto> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
[09:28] <rbs-tito> pi3: Well the update manager just changes one .deb package for another. From synaptic you need to select the package and go to package > force version
[09:28] <neverblue> MacPhisto, you should be kicked
[09:28] <wols> acke: that rmnologin is ok. but there should be a S99gdm. if there isn't that's your problem. S99gdm should link back to /etc/init.d/gdm
[09:28] <MacPhisto> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
[09:28] <AndrewB> MacPhisto: please use pastebin
[09:28] <stefg> newtubuntu: ok, refresh the package info, type 'sudo apt-get update' to a terminal, then try again
[09:28] <MacPhisto> 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
[09:28] <pi3> !pastebin | MacPhisto
[09:28] <ubotu> MacPhisto: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic)
[09:28] <MacPhisto> 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
[09:28] <MacPhisto> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
[09:28] <stefg> !ops
[09:28] <ubotu> Help! Mez, LjL, elkbuntu, imbrandon, DBO, gnomefreak, Hobbsee, rob, ompaul, Madpilot, Burgundavia, Seveas, CarlK, crimsun, ajmitch, tritium, Nalioth, thoreauputic, apokryphos, tonyyarusso, PriceChild, Amaranth, jrib, jenda, nixternal, Myrtti or mneptok
[09:28] <MacPhisto> 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14)
[09:28] <MacPhisto> 03:00.0 Ethernet controller: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter (rev 01)
[09:28] <MacPhisto> 0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
[09:28] <neverblue> MacPhisto, leave
[09:28] <MacPhisto> 0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
[09:28] <neverblue> your flooding everyone
[09:28] <Amaranth> !pastebin | MacPhisto
[09:28] <MacPhisto> Sorry I didnot know
[09:29] <fxfitz> So how does one go about using a "virutal Windows installation" over Ubuntu?
[09:29] <yehweh> wceoscar: Try the same thing in feisty and see if it works ;)
[09:29] <acke> wuls yeah i didnt have any ending with gdm
[09:29] <semih> hi all. I have a wide screen monitor and how to use this correctly?
[09:29] <roadkill_> yehweh:  i think u need wine to help with that
[09:29] <wceoscar> Ok
[09:29] <acke> wols didnt have any ending with gdm
[09:29] <MacPhisto> Anybody here speaks portuguese ???
[09:29] <acke> wols what should i do?
[09:29] <stefg> !fixres | semih
[09:29] <ubotu> semih: The X Window System is the part of your system that's responsible for graphical output. To restart your X, type  sudo /etc/init.d/?dm restart  in a console - To fix screen resolution or other X problems: http://help.ubuntu.com/community/FixVideoResolutionHowto
[09:29] <wceoscar> now, where can i go to get widgets ??????????????????????????????????
[09:29] <wols> semih: dpkg-reconfigure xserver-xorg. choose your res there
[09:29] <wols> acke: no gdm in /etc/init.d/?
[09:29] <yehweh> well set beryl to 10 in order and gnome-panel to 50
[09:30] <dansov> hi all
[09:30] <roadkill_> wceoscar:  i dunno but msg me once u find out please
[09:30] <dansov> linux rulez! windows sux!
[09:30] <newtubuntu> does anyone have JRE running well in Firefox on Feisty Fawn ?
[09:30] <dansov> no
[09:30] <NeXtDaY> hi all
[09:30] <kazol> yehweh: I have removed the error msg. but conky just blinks randomly. Is this supposed to happen? Are there not enough sys. resources to handle it?
[09:30] <wols> newtubuntu: dpkg -l |grep java
[09:30] <acke> wols yeah i have gdm there
[09:30] <dansov>  .
[09:30] <dansov> ?
[09:30] <yehweh> wceoscar: well set beryl to 10 in order and gnome-panel to 5
[09:30] <stefg> newtubuntu: ok, refresh the package info, type 'sudo apt-get update' to a terminal, then try again
[09:30] <eternal_p> newtubuntu: yup, what problems are you having?
[09:30] <kazol> !ru > dansov
[09:31] <wols> acke: then link it to /etc/rc2/S99gdm. maybe use rcconf or such
[09:31] <NeXtDaY> !gimp
[09:31] <ubotu> gimp is an advanced image manipulation application for Ubuntu. See http://www.gimp.org for tutorials and more information.
[09:31] <sluimers> Can someone help me with getting java to work on Firefox?
[09:32] <sluimers> JRE that is
[09:32] <Cypress1> Hi to everyone
[09:32] <mikeypizano> hey
[09:32] <sluimers> hi Cypress
[09:32] <Bassetts> can NetworkManager not handle WPA?
[09:32] <wols> !java | sluimers
[09:32] <ubotu> sluimers: To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository. Enable the backports repository on Edgy to install sun-java6-jre
[09:32] <newtubuntu> etarnal_p:  I installed JRE1.6, and it's testing OK, but NOT linked into Firefox (so no plugin). I can't run JRE content in Firefox.
[09:32] <mikeypizano> anyone know anything bout acer laptops here?
[09:32] <kmaynard> !wpa
[09:32] <ubotu> Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs
[09:32] <Cypress1> hi.. i have a problem with a isa sound card
[09:32] <wols> Bassetts: usually not. usually you need wpa-supplicant for WPA, then it can
[09:32] <Cypress1> (sorry for my english)
[09:32] <Bassetts> mikeypizano, what do you want to know?
[09:32] <wols> newtubuntu: I asked you to run something
[09:32] <marais> does anyone know why I have no sound without an apparent reason? (apart from playing youtube)
[09:33] <Bassetts> wols, that is installed, but if i turn roaming mode of i still cant set up a static wpa connection
[09:33] <mikeypizano> my graphics card isnt excatly working, and my mouse is overly sensitive
[09:33] <acke> wols are you telling me to do a ln -s /etc/init.d/gdm /etc/rc2/S99gdm
[09:33] <newtubuntu> wols, I did.
[09:33] <wols> marais: does sound usually work
[09:33] <Bassetts> mikeypizano, what model?
[09:33] <newtubuntu> it listed a list of packages or something
[09:33] <MacPhisto> I would like apologize everyone for paste a large text in this channel .
[09:33] <wols> acke: basically yes
[09:33] <mikeypizano> aspire 5003WLMI
[09:33] <marais> yes wols:)
[09:33] <newtubuntu> what did this do ?
[09:33] <reverseblade> hi channel
[09:33] <ferronica> Sorry, I scanned 1 interface, but the Access             
[09:33] <ferronica>            Concentrator of your provider did not respond. Please    
[09:33] <ferronica>            check your network and modem cables. Another reason      
[09:33] <ferronica>            for the scan failure may also be another running pppoe   
[09:33] <ferronica>            process which controls the modem.
[09:33] <Cypress1> does anyone here know how can i make to use my sound card ? it's an awe creative..
[09:33] <wols> marais: OSS modules loadeed? flash needs them for sound
[09:33] <Co^Eksmud^Lagi^B> hello
[09:33] <jrib> !paste | ferronica
[09:33] <ubotu> ferronica: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic)
[09:33] <mikeypizano> hi
[09:33] <marais> wols they must be as it works most of the time
[09:34] <acke> wols. im kindof newbie, so what do you mean wiht basically
[09:34] <newtubuntu> wols, I did it.  What is it supposed  to do ?
[09:34] <wols> marais: and when doesn't it work and what does it do then?
[09:34] <ferronica> jrib: by mistake i did very sorry
[09:34] <newbie_> ive deleted /etc/postfix by mistake
[09:34] <newbie_> how to restore it?
[09:34] <wols> acke: use rcconf
[09:34] <mikeypizano> my graphics wont go above svga, my screen is wxga
[09:34] <Bassetts> sorry mikeypizano dont know about that
[09:34] <marais> wols it's of suden..
[09:34] <newbie_> ive tried to reinstall apt-get install postfix and it doesnt work
[09:34] <marais> sudden
[09:34] <ferronica> sorry to all :(
[09:34] <stefg> !fixres | mikeypizano
[09:34] <mikeypizano> bassetts, do u have aim by any chance?
[09:34] <ubotu> mikeypizano: The X Window System is the part of your system that's responsible for graphical output. To restart your X, type  sudo /etc/init.d/?dm restart  in a console - To fix screen resolution or other X problems: http://help.ubuntu.com/community/FixVideoResolutionHowto
[09:34] <wols> acke: and knowing how to use ln -s makes your more knowledgeable about linux than about 90% of the people in here
[09:34] <Iv4n> /server eu.undernet.org
[09:35] <sahil> anyone know of a video editor for Linux ?
[09:35] <Cypress1> this seems to be a flood room :__(
[09:35] <newbie_> anyone please?
[09:35] <Bassetts> wols, wpa-supplicant is installed but i can only connect to the wireless network if i use nm-applet, with roaming mode on
[09:35] <jrib> sahil: kino, pitivi, both in the repositories
[09:35] <reverseblade> sahil, yeah
[09:35] <Cypress1> bye..
[09:35] <Bassetts> mikeypizano, no, sorry
[09:35] <reverseblade> sahil, kino is nice
[09:35] <marais> wols it works ok and suddenly no sound
[09:35] <roadkill_> newbie_:  whats up
[09:35] <wols> mikeypizano: what videocard do you have and what driver do you use right now?
[09:35] <mikeypizano> any messengers? chats too fast for me
[09:35] <terlmann> Wine in feisty , .9.36 , crashes when you go to the audio tab !
[09:35] <stefg> sahil: kino, avidemux, pitivi. cinelerra
[09:35] <newbie_> ive deleted /etc/postfix by mistake, anyone know how to restore it?
[09:35] <terlmann> why why why
[09:35] <mikeypizano> its a sis m760GX chipset, just whats on the cd
[09:35] <sluimers> wols, thanks!
[09:35] <reverseblade> newbie_, re install the postfix package
[09:35] <roadkill_> terlmann, i've had that issue
[09:35] <newbie_> helpplease :(
[09:35] <sahil> thanks guys ill try Kino
[09:35] <terlmann> any fix yet ?
[09:36] <wols> marais: that is hard to debug. if you can reproduce it, start the browser you run flash in it from a xterm. when the sound stops, check that xtem for messages
[09:36] <MacPhisto> Wols are you there ??
[09:36] <terlmann> Unhandled exception: page fault on read access to 0x00000040 in 32-bit code (0x7eba963f).
[09:36] <mikeypizano> what ever is on 7.04 is what i am using
[09:36] <reverseblade> newbie_, first completely purge it and then install it
[09:36] <terlmann> roadkill
[09:36] <marais> thanks a lot wols :)
[09:36] <terlmann> got any fish ?
[09:40] <MacPhisto> Wols Follow my pastebin. http://paste.ubuntu-nl.org/26306/
[09:40] <reverseblade> newbie_, or from command line sudo dpgk-reconfigure postfix might work
[09:40] <wols> MacPhisto: what was the name of the modem again?
[09:40] <MacPhisto> Agere High Definition .
[09:40] <mikeypizano> hey, any one have a messenger that i can use for help, this chat is hard to keep up with for me
[09:40] <DagonIT> how does one back up his email folder and setting in evolution?
[09:40] <reverseblade> mikeypizano, what program are you using ?
[09:40] <roadkill_> terlmann:  join #pizza
[09:40] <mikeypizano> for what? chat?
[09:40] <reverseblade> DagonIT, search the forums, there are answers to that backup evolution
[09:40] <reverseblade> mikeypizano, yeah
[09:40] <DagonIT> thanks
[09:40] <mikeypizano> xirc
[09:40] <stefg> Dragnslcr: simply archive ~./evolution
[09:40] <reverseblade> mikeypizano, use xchat, it is nice
[09:40] <capitalist> jikanter: so what do i add to $path?
[09:40] <mikeypizano> maybe this is xchat, hold on
[09:40] <reverseblade> stefg, no
[09:40] <MacPhisto> But I suppose that It's connect together in the same bus with Intel High Definition Audio Controller.
[09:40] <mikeypizano> ok yea this is xchat
[09:40] <reverseblade> Dragnslcr, no, it is more complicated, search the forums
[09:40] <reverseblade> mikeypizano, Xchat is nice
[09:40] <MacPhisto> On Windows it's show me as Realtek High Definition Audio .
[09:40] <Dunas> Hello.
[09:40] <mikeypizano> reverseblade, can i pm u?
[09:40] <cute_bettong> how do i change the window border for my ubuntu? useing a bitmap or jpeg image i might have
[09:40] <jbsytes> Hello
[09:40] <nikin> hy
[09:40] <mikeypizano> hi
[09:40] <reverseblade> !hi| Dunas
[09:40] <ubotu> Dunas: Hi! Welcome to #ubuntu!
[09:40] <MacPhisto> and the modem as Conexant High Definition modem
[09:40] <silvertip257> I'm having problems chrooting while building a busybox environment; I try to run "make install," but it does not recognize make
[09:40] <reverseblade> mikeypizano, sure
[09:40] <mikeypizano> thanks
[09:40] <Pconfig> hey, i've just installed privoxy with tor on a server computer. Is it normal that it's running slow? I'm using it with some desktop client in the network. Is there any other proxy software stuff available that'd make it go faster?
[09:40] <jbsytes> can anyone help me setup evolution to work with msn email, i don't have Hotmail, just the msn mail
[09:40] <Dunas> How do I connect to a wireless network with Ubuntu, using a Gateway computer and a Linksys router?
[09:41] <MacPhisto> Wols, my notebook it's an Acer 2480-2969 .
[09:41] <reverseblade> Pconfig, I use tor + privoxy + firefox with torbutton
[09:41] <rbs-tito> jbsytes: Do you know the server settings?
[09:41] <nikin> how can i set vga=791 in LILO ? couse somhow LILO thinks that i have no SVGA card witch is not true
[09:41] <AisDeck> My ubuntu keeps crashing randomly :(
[09:41] <jbsytes> i can get it
[09:41] <capitalist> i am having trouble making a driver: http://dpaste.com/12551/. how do i add to the $path variable to fix the problem?
[09:41] <wols> MacPhisto: I guess so too. do a lspci -vv
[09:41] <reverseblade> AisDeck, you should try to diagnose it? you have to know when and why it crashes first
[09:42] <acke> wols i found this  S13gdm -> ../init.d/gdm
[09:42] <AisDeck> I don't really know
[09:42] <AisDeck> It's just random
[09:42] <Dunas> How do I connect to a wireless network with Ubuntu, using a Gateway computer and a Linksys router?
[09:42] <acke> wols isnt that what i was searching for before
[09:42] <wols> MacPhisto: http://packages.ubuntu.com/cgi-bin/search_packages.pl?keywords=sl-modem&searchon=names&subword=1&version=feisty&release=all
[09:42] <[ThC] Primski> b
[09:42] <wols> acke: acke sorta. but way too early imho
[09:42] <LinAsH> Pconfig, Tor IS slow, anyway
[09:42] <Hibame> Are there any better ways to edit a file then the vi command?
[09:42] <niuq> hi, i installed gsynaptic, for configuring my touchpad, the problem is when i start my computer the configurations that i made are not set up!, any help would be great
[09:42] <acke> wols i dont get it
[09:42] <mikeypizano> anyone who can help me with my graphics card and mouse, please pm me, i can't keep up with chat
[09:42] <yehweh> Dunas: go to System>Admin>network
[09:42] <AisDeck> My mouse just stops and nothing helps.
[09:43] <Lectus> Hello
[09:43] <capitalist> i am having trouble making a driver: http://dpaste.com/12551/. how do i fix the problem?
[09:43] <Lectus> can anyone help me installing my webcam?
[09:43] <wols> acke: what is the error when you have all X closed and run /etc/init.d/gdm start ? check dmesg and syslog
[09:43] <LinAsH> Hibame, nano
[09:43] <wols> MacPhisto: http://linmodems.technion.ac.il/travelmate800.ubuntu.slmodem.html
[09:43] <Kun1> Hi guys.. I have just made an fresh install of ubuntu.. In my previous install i installed my Nvidia drivers thrue automatix2.. It coursed some problems i was told.. I also tried a web guide on how to install Nvidia, but it didnt work :( Anyone who can  tell me how to correctly install my Nvidia drivers ?? :)
[09:43] <acke> wols okay i will look at that.
[09:43] <Hibame> LinAsH, how does nano work?
[09:43] <Dunas> What should I do after that? I'm using my XP at the moment because I couldn't get Linux to work.
[09:43] <wols> mikeypizano: unlikely you will get an answer or a teker
[09:43] <Pconfig> LinAsH: Does privoxy work without tor? And does it work faster without?
[09:43] <maeth> is there a version of hamachi with GUI for ubuntu?
[09:44] <CeruM> hi, can anyone help me with the install?
[09:44] <mikeypizano> wols, whats a teker?
[09:44] <yehweh> ok after that. Enable your wireless card and click on properties and check the box that says "enable roaming
[09:44] <sharp15> the breezy repos were discontiued due to age, or are they just down?
[09:44] <verb3k> CeruM, what's the problem?
[09:45] <CeruM> i dont have a resize partition option
[09:45] <LinAsH> Hibame, all commands are indicated when you launch it, '^' being the ctrl key
[09:45] <reverseblade> Kun1, also you can try envy
[09:45] <CeruM> i have 3 options... use whole disk, use largest free space, or manual
[09:45] <Elliot_M> does anyone know how i can install nero for linux versian
[09:45] <Hibame> LinAsH, ah, thanks
[09:45] <CeruM> none of them say resize partitions
[09:45] <LinAsH> Pconfig, pricoxy works just great alone
[09:45] <yehweh> Dunas: It should apear in the top panel in the right corner. You will get a nice drop down box with your ssid
[09:45] <verb3k> CeruM, try manual partitioning ....it gives you much better control
[09:45] <CeruM> im installing ubuntu onto a HDD without windows, but it has data on it
[09:45] <Dunas> Okay.
[09:46] <Elliot_M> or just a good a program to burn ISO and IMG images to a DVD
[09:46] <MacPhisto> Wols, my lspci -vv : http://paste.ubuntu-nl.org/26310/
[09:46] <jbsytes> i have the server settings, just need to know how to setup evolution
[09:46] <CeruM> when i go to manual, i click on my existing partition, and enter the size i want... and it wont erase any existing data?
[09:46] <thug> wols what was that link you gave me earlier ?
[09:47] <nickrud> CeruM, you need to backup that data.
[09:47] <CeruM> i cant
[09:47] <ajwo> I have an ubuntu server 6.06. I am 'apt-get install libpq-dev', and getting this error:
[09:47] <CeruM> why cant i just install ubuntu and not have it destroy my current data?
[09:47] <LinAsH> CeruM, or you need to resize your partition
[09:47] <ajwo> The following packages have unmet dependencies: libpq-dev: Depends: libpq4 (= 8.1.4-0ubuntu1) but 8.1.8-0ubuntu6.06.1 is to be installed
[09:47] <ajwo>              Depends: libssl-dev but it is not going to be installed
[09:47] <nickrud> CeruM, is your partition already linux? (ext3)?
[09:47] <CeruM> how do i resize them?
[09:47] <capitalist> how do i turn off the window preview in beryl?
[09:47] <CeruM> no, i think its ntfs
[09:47] <verb3k> CeruM,  well I think so ....I didn't try resizing ......you should ask someone who really knows about it...and if you want to relieve yourself ,just backup your data
[09:48] <Elliot_M> a good a program to burn ISO and IMG images to a DVD
[09:48] <vbanait> Hi anybody is aware of an app like phrase express or autohotkey for ubuntu
[09:48] <`4aFkA`> How can i install NERO linux on ubuntu ?? pls
[09:48] <wols> MacPhisto: http://linmodems.technion.ac.il/travelmate800.ubuntu.slmodem.html
[09:48] <LinAsH> CeruM, use gparted
[09:48] <Elliot_M> ye how can i burn nero linx
[09:48] <wols> thug: filext.com
[09:48] <verb3k> exit
[09:48] <geeksauce> hey everyone, can anyone help me set up a unix share that i can access from my mac?  i've tried on my own but can't seem to get it to work
[09:48] <CeruM> LinAsH does that come on the ubuntu dvd?
[09:48] <wols> Elliot_M: burn the ISO as image
[09:48] <LinAsH> CeruM, yes
[09:48] <CeruM> ok thanks
[09:48] <wols> geeksauce: samba
[09:49] <vbanait> something like phrase express or autohoykey
[09:49] <Elliot_M> i kno im saying whats a good progrm
[09:49] <`4aFkA`> How can i install NERO linux on ubuntu ?? pls
[09:49] <LinAsH> CeruM, 'sudo gparted' in a terminal
[09:49] <MacPhisto> Wols, thank you for your effort in help me to install my modem but, I also have another problem to install my Wireless card Atheros AR5006EG and I already tried madwifi .
[09:49] <AisDeck> OK, another try: My ubuntu keeps crashing/freezing randomly not even ctrl+alt+backspace helps, I've checked the logs, but theres nothing. I also checked the core temperatures and they were normal. I have absolutely no idea what might be causing this.
[09:49] <wols> MacPhisto: madwifi is the one to use. what problem did you get?
[09:49] <Lectus> How can install  a webcam in Ubuntu?
[09:49] <nickrud> CeruM, take the disk to a friend, plug it into his computer and backup then
[09:49] <wols> AisDeck: o a metest, a disk test
[09:49] <geeksauce> wols, i know how to set up samba, but i want to try NFS
[09:50] <jrib> !webcam > Lectus (see the private message from ubotu)
[09:50] <wols> Elliot_M: gnomebaker or k3b
[09:50] <LinAsH> `4aFkA`, why? k3b is just great
[09:50] <hatredx> AisDeck, is this after long periods away from X session?
[09:50] <MacPhisto> When I give the command ifconfig it's not show me up the wireles card
[09:50] <AisDeck> No, it happens randomly
[09:50] <wols> geeksauce: why? OSX uses samba by default
[09:50] <`4aFkA`> LinAsH i want to try it..
[09:50] <hatredx> k, nvm then =p
[09:50] <AisDeck> it could happen right now
[09:50] <Elliot_M> will knombaker burn IMG files to a dvd
[09:50] <vbanait> ubotu: do you know something like phrase express or autohotkey for abbr. expansion
[09:50] <wols> MacPhisto: ifconfig -a. should be an "ath0". also: what have you installed(done so far?
[09:51] <hatredx> AisDeck, run memory testing yet?
[09:51] <ajwo> I am installing libpq-dev in a Ubuntu 6.06 server, and I am getting the following error: http://paste.ubuntu-nl.org/26312/
[09:51] <ajwo> Any idea?
[09:51] <vbanait> do you know something like phrase express or autohotkey for abbr. expansion
[09:51] <LinAsH> MacPhisto, try ifconfig -a to see all network device
[09:51] <Elliot_M> wols will knombaker burn IMG files to a dvd
[09:51] <AisDeck> ehm, sry Im new to linux... how to run a memory test?
[09:51] <wols> Elliot_M: gnomebaker. there is no "knombaker". and yes it can burn ISOs. your "img" files are nothing. no linux program copies copyprotected CDs very well
[09:51] <Lectus> jrib, my webcam was detected and listed on lsusb, but the problem is that Camorama can't find it
[09:51] <vbanait> do you know something like phrase express or autohotkey for abbr. expansion
[09:51] <jbsytes> does anyone have exp settin up MsnMail to work with Evolution ?
[09:51] <geeksauce> wols, cause i'm a big geek :)  various reasons though, like i only want to be able to share those files with my mac and not doze boxes
[09:51] <roadkill_> WHO FARTED IN HERE!!!
[09:51] <MacPhisto> Wols, ifconfig -a just show-me "eth0, lo, vmnet8 .
[09:52] <vbanait> do you know something like phrase express or autohotkey for abbr. expansion
[09:52] <Elliot_M>  wols what about Nero for Linux
[09:52] <Kaitlyn2004> I followed a guide to setting up subversion... and the last part is restarting apache, and I get "No Apaache MPM package installed"
[09:52] <hatredx> AisDeck, there is an option at the Grub boot screen for memtest86 or something of that nature. It will test the integrity of the memory as that could be a potential cause... just a step in troubleshooting.
[09:52] <MacPhisto> Wols, Have you a step by step to install this wireless card ???
[09:52] <wols> geeksauce: when you are a geek then you don't need our help cause google is your friend.als if you are a geek you don't want us to do it for you as you basically asked but you have a specific question. google for "smart questions" for a beginning. the only good thing esr ever wrote
[09:52] <bricas> does anyone have any managing perl modules on ubuntu? i'm wondering if it's best to just ignore the packaging system and go straight for cpan, or if there's some other way...
[09:52] <jrib> Lectus: sorry, I've never set one up
[09:52] <LinAsH> MacPhisto, what's your wireless card ?
[09:52] <wols> MacPhisto: no. but there are tons of howtos out there
[09:52] <AlexC> Desktop effects - cube workspace switcher was working. I was showing a friend how to enable it. I disabled it and enabled it. Now it wont work.
[09:53] <fxfitz> How do I go about setting it up so I can print from my Ubuntu laptop to a printer set up on my Ubuntu desktop???
[09:53] <MacPhisto> Atheros AR5006EG .
[09:53] <AlexC> I have verified that I have 4 workspaces in pager.
[09:53] <vbanait> do you know something like phrase express or autohotkey for abbr. expansion
[09:53] <AlexC> Does anyone now how to make it work again?
[09:53] <pi3> fxfitz: system>administration>printing
[09:53] <geeksauce> wols, alright, point taken.  i'll get my google on first.
[09:53] <wols> MacPhisto: could be that this chip is not supported by madwifi yet...
[09:53] <Elliot_M>  wols what about Nero for Linux
[09:53] <salocin> Any skilled ubuntu users interested in helping on an open source project?
[09:53] <fxfitz> pi3, OKay... and then what?
[09:53] <bronze> How do I configure grub in ubuntu?
[09:53] <reverseblade> salocin, I am an expert
[09:53] <vbanait> do you know something like phrase express or autohotkey for abbr. expansion
[09:54] <pi3> fxtitz add a new printer that corresponds to the one you have
[09:54] <mrsn0> salocin maybe the mailing list or forums would be better to gather interest, may i ask what project ?
[09:54] <MacPhisto> I already read some steps to install this wireless card but none work with my card. I already access the Atheros web page and them recommend madwifi .
[09:54] <vbanait> do you know something like phrase express or autohotkey for abbr. expansion
[09:54] <salocin> Right now i'm looking for people familiar with the Ubiquity installer.
[09:54] <vbanait> \
[09:54] <wols> MacPhisto: AR 5006EG: works with madwifi-r2153-20070224
[09:54] <yehweh> AlexC: http://ubuntuforums.org/showpost.php?p=2221625&postcount=29
[09:54] <salocin> We need to modify it a bit to work well as part of a larger project.
[09:54] <fxfitz> pi3, I go to Network Printer, and then I don't know what to select from the drop down menu.
[09:55] <wols> so you need a madwifii newer than this
[09:55] <vbanait> how to configure gnumed
[09:55] <Hibame> D: How do I find the root password from the server intall
[09:55] <wols> !root | Hibame
[09:55] <ubotu> Hibame: do not try to guess the root password, that is impossible. Instead, realise the truth.. there is no root password. Then you will see that it is sudo that grants you access and not the root password. Look at https://help.ubuntu.com/community/RootSudo
[09:55] <reverseblade> lol
[09:55] <mrsn0> salocin well i would maybe post your ideas on the forum  :)
[09:55] <pi3> fxfitz: how are you connecting to the printer?
[09:55] <wols> Hibame: ubuntu has no root password and probably never will
[09:55] <reverseblade> wols, that' really funny
[09:55] <Elliot_M> Nero Linux? how to configure and how to install and burn IMG files to a DVD
[09:55] <vbanait> do you know something like phrase express or autohotkey for abbr. expansion
[09:55] <Hibame> wols then how do I set perms so my account can edit files D:
[09:55] <wols> Elliot_M: ask ahead. nero is not in ubuntu. you bough it, you can ask them
[09:55] <fxfitz> pi3, Its connected to a ubuntu desktop that is on the same network as me.
[09:55] <Student> /bin/sh: can't access tty; job control turned off - I'm dual boot dapper and winxp, everything was working fine, until I wend into windows downloaded acrobat reader, and then tried to boot back to ubuntu. What do I do?
[09:56] <pi3> fxfitz, you have to set up a local network, like samba (smb). I don't know about that
[09:56] <wols> Student: before you booted windows you did something ubuntu which caused this. not downloading acrobat
[09:56] <pi3> !samba > fxfitz
[09:56] <Elliot_M> i should ask Nero how to install it in Ubuntu ?
[09:56] <MacPhisto> Wols, I appreciate your help in this matter  and people like you do us to continue using Linux . Since I bought this notebook  I decide to be free and dont wont to use RWindows anymore.
[09:56] <vbanait> do you know something like phrase express or autohotkey for abbr. expansion
[09:57] <fxfitz> pi3, But isn't this running off of CUPS? Can't I connect to that or something?
[09:57] <jbsytes> can someone PM me how to setup msnmail please
[09:57] <fxfitz> pi3, Yeah, these are both Ubuntu machiens so I shouldn't need Samba.
[09:57] <sx66> how do you insert numbers in openoffice spread sheet? as in auto numbering.
[09:57] <vbanait> any abbr. expander for ubuntu
[09:57] <pi3> fxfitz, yes of course you can, but I can't help you
[09:57] <Student> wols, I loaded a .pdf to a thumbdrive using ubuntu - so I could load it to windows when I booted it. - Could that be it?
[09:58] <yehweh> Elliot_M: Well if you insist on using Nero why dont you google it? http://www.nero.com/eng/NeroLINUX.html
[09:58] <fxfitz> pi3, Ok. Thanks anyways!
[09:58] <wols> MacPhisto: follow this howto and tell us where you encounter a problem.
[09:58] <kazol> I need a distro reccomendation for a NAS with encrypted FTP support. First off, should I use gui or txt?
[09:58] <yehweh> Elliot_M: use the .deb
[09:58] <vbanait> any abbr. expander for ubunt
[09:58] <vbanait> any abbr. expander for ubunt
[09:58] <vbanait> any abbr. expander for ubunt
[09:58] <sx66> how do you insert numbers in openoffice spread sheet? as in auto numbering.
[09:58] <vbanait> any abbr. expander for ubunt
[09:58] <vbanait> any abbr. expander for ubunt
[09:58] <vbanait> any abbr. expander for ubunt
[09:58] <pi3> no problem
[09:58] <MacPhisto> What's howto ???
[09:59] <tortho> Hello anyone tryed any speech to text on Ubuntu?
[09:59] <MacPhisto> Would you also inform me again the site to find the driver to install my modem ?? Please ..
[09:59] <AlexC> Thanks yehweh!
[09:59] <AlexC> That did it.
[09:59] <Elliot_M> the 32 or 64 bit?
[09:59] <reverseblade> tortho, I  tried text to speech but not vice versa
[10:00] <Bonkers-> what's the easiest way to recompile my kernel and just change an option or two? just apt-get source the linux-image package I'm using?
[10:00] <Student> /bin/sh: can't access tty; job control turned off - Can anyone help me out here, or does that error mean I'm screwed?
[10:00] <tortho> reverseblade: Thanks, want to try to speak to controll or transform to text
[10:00] <wols> Bonkers-: kernel-package. have you ever compiled a kernel? seen menuconfig?
[10:01] <wols> Bonkers-: apt-get build-essential kernel-package libncurses5-dev
[10:01] <Bonkers-> wols: ya, I know all about compiling kernels, I just wanted to know the ubuntu way
[10:01] <tortho> reverseblade: like starting program or drafting a document
[10:01] <Bonkers-> wols: thanks
[10:01] <wols> then after you downlaoded the kernel source you make menuconfig it. read /usr/share/doc/kernel-package/ for details
[10:01] <reverseblade> tortho, when you find it make sure it can distinguish eigth and eigthth. It is a nice quality check
[10:01] <DSBassetts> is it possible to setup a static wpa wireless connect?
[10:02] <wols> Bonkers-: all you need to do is use kernel-package (make-kpkg is the ocmmand). that gives you a ncie shiny .deb to install. very pretty
[10:02] <wols> Bonkers-: if you want you can use kernel.org sources too
[10:02] <reverseblade> DSBassetts, I am also suffering the same. IT is sure possible but not from the network manager
[10:02] <wols> DSBassetts: yes. man interfaces. that's the file you need to edit
[10:02] <DSBassetts> reverseblade, I have noticed that
[10:03] <DSBassetts> wols, any documentation on it?
[10:03] <wols> man interfaces
[10:03] <DSBassetts> ok
[10:03] <Bonkers-> wols: where do I get the sources of linux-image-2.6.20-16-generic with the corresponding .config file? just apt-get source it?
[10:03] <wols> and wireless-tools also has some for the WPA part /usr/share/doc/wireless-tools. and probably wpa-supplicant docs
[10:03] <wols> Bonkers-: yes
[10:03] <wols> Bonkers-: and the .config si also in /boot/ for any ubuntu kernel
[10:04] <bronze> How can I add another OS to the default ubuntu bootloader (GRUB?)?
[10:04] <Bonkers-> wols: ok, thanks
[10:04] <DSBassetts> wols, can i not use network manager to set it up so I can switch between static and roaming?
[10:04] <wols> Bonkers-: edit /boot/grub/menu.lst
[10:04] <Bonkers-> yep
[10:05] <peanutb> bronze, https://help.ubuntu.com/community/GrubHowto/ChangeDefaultOS
[10:05] <Bonkers-> a make-kpkg .deb doesn't do that for me automatically?
[10:05] <wols> dbzdeath[lappy] : no clue
[10:05] <FurryNemesis> hello all
[10:05] <wols> Bonkers-: for your new kernel, it does. for a different OS: not necessarily
[10:05] <dbzdeath[lappy] > wols: ... wrong tab completion?
[10:05] <Dunas> There. I managed to get it hooked up to a cable modem while in Ubuntu.
[10:05] <wols> dbzdeath[lappy] : happens sometimes (read: often). sorry
[10:06] <yehweh> Dunas: Did wifi not work?
[10:06] <Dunas> I'm still using the LiveCD because I don't want to install it if I can't get the Wireless Card working. It's a built-in Broadcom one, as I recall.
[10:06] <Dunas> Yehweh: It didn't.
[10:06] <arreola> is there some way to increase the speed of my DSL connection using software?
[10:06] <arreola> signal booster, etc?
[10:06] <Dunas> Yehweh: The only two connections listed were a Wired one and a Modem one.
[10:06] <cchance1> anyone here use MONO for ASP.NET?
[10:07] <yehweh> Dunas: Open terminal and type iwconfig
[10:07] <gnychis_> I am user 'gnychis' ... I created a group 'godweb', and added myself to it:  godweb:x:1002:pjanthony,gnychis    .... i then did 'sudo chown root:godweb /god_website -R' ... and then cd'ed to it and i have no permission to do anything but read... why, if i'm in the group?
[10:07] <wols> Dunas: ndiswrapper or bcm43xx. lspci will tell you which broadcom it is
[10:07] <chaosmystic> How do I play encrypted DVD's?
[10:07] <navets> hey I need some html help
[10:08] <wols> !dvd | chaosmystic
[10:08] <ubotu> chaosmystic: For playing DVD, see http://help.ubuntu.com/ubuntu/desktopguide/C/video.html - "libdvdcss2" can be found at http://wiki.ubuntu.com/SeveasPackages - Try k9copy (available in !Universe) for backing up DVDs
[10:08] <Dunas> It says no wireless extensions.
[10:08] <wols> navets: #web
[10:08] <DagonIT> I tried copying the ./evolution folder as suggested in the forums, but I get invalid parameters errors while copying the file, and suggestions/solutions
[10:08] <wols> Dunas: what commandline?
[10:08] <yehweh> wols: Do all broadcom cards need ndis?
[10:08] <Dunas> iwconfig
[10:08] <chaosmystic> Thanks Ubotu
[10:08] <wols> yehweh: no. as I said: bcm43xx. but all need non-free firmware
[10:08] <yehweh> naah do what wals asked you to do
[10:08] <arreola> is there such thing as a way to boost DSL Signal via software?
[10:09] <FurryNemesis> !exaile
[10:09] <ubotu> Sorry, I don't know anything about exaile - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[10:09] <yehweh> sorry I ment wols
[10:09] <wols> Dunas: you have the driver not loaded. no surprises there
[10:09] <FurryNemesis> !synaptic
[10:09] <ubotu> synaptic is Ubuntu's Graphical Package Manager. For a good howto see https://help.ubuntu.com/community/SynapticHowto
[10:09] <Dunas> I tried ndiswrapper and got The program 'ndiswrapper' is currently not installed.  You can install it by typing:
[10:09] <Dunas> sudo apt-get install ndiswrapper-common
[10:09] <wols> arreola: no
[10:09] <arreola> ok.
[10:09] <wols> arreola: you can sometimes play around with modem settings but that is highly modem specific. also some modems have better singal quality than others
[10:09] <Steffen> can someone explain to me, how i setup firestarter to not start, before I have Internet connection ? (It's wireless LAN, so it takes some time)
[10:10] <Dunas> Heh... yeah, I figured it was something like that. Side effect of using Windows all my life is I have absolutely no idea what I'm doing here.
[10:10] <wols> Steffen: why do you need firestarter?
[10:10] <preaction> Steffen: the firewall is part of the kernel, it's always there. firestarter just configures it
[10:10] <Dunas> How do I load the driver?
[10:10] <wols> Steffen: man interfaces. use a if-up script instead of a /etc/init.d/ one
[10:10] <arreola> ....i'm getting so tired of this DSL connection - 384 kbps
[10:10] <geeksauce> wols, alright.  i did some more reading, and i'm getting some errors about my exports file.  would you mind taking a look at it if i pastebin it?
[10:10] <wols> Dunas: I asked you something. do this first
[10:10] <arreola> the fastest connection available in my area
[10:10] <wols> geeksauce: pastebin it. the whole channel can look. not just may.
[10:11] <Steffen> preaction / wols: i'll lookup interfaces. The reason I like firestarter, is that I'm not 100 % certain, which ports to open - so I can see if something is blocked
[10:11] <wols> arreola: if the ISP only gives you a386kbps connection that is all you can do. playing with modem settings only work if you have 1Mbit one but only get 500kbits for example
[10:11] <levander> Anybody know if Bob Chassel's intro to elisp book is available in the Canonical repositories?
[10:11] <newtubuntu> OK. I just installed VMWare Player package (from the Synaptic installer, not from VMWare's website, is that ok ?). What do I need to do to 1-Find it, 2-Launch it, 3-Run Win XP on it ?
[10:12] <Dunas> Okay, which one did you want me to use? I tried ndiswrapper and got an error saying it wasn't installed.
[10:12] <wols> Steffen: netstat -anp |grep LISTEN. those are ALL open ports. you don't need a firewall
[10:12] <arreola> ok - thanks wols
[10:12] <Bassetts> newtubuntu, it is in Applications>System Tools
[10:12] <pha|con> Dunas: you have to install ndishwrapper - sudo apt-get install ndiswrapper-common
[10:12] <wols> Dunas: I don't want you to use anything. iwan you to tell us which chip exactly you have
[10:12] <Steffen> wols: But how do I see if a port is blocked, and thus making some program (i.e. Gaim) not work ?
[10:13] <Dunas> Alright.
[10:13] <Steffen> I'm just coming from Windows, so I may be a bit "tainted" :-)
[10:13] <wols> Steffen: ubuntu doesn't block anything and it shouldn't
[10:13] <Steffen> wols: But isn't that a security breach ?
[10:13] <wols> a personal firewall is a useless bit of software. every "good" spyware can circumvent it
[10:13] <wols> Steffen: no
[10:13] <GizDrak> I am trying to create a partition with gparted on a 1TB raided drive when I go to create the partition it says it is going to be -1079990287872.00 B ........
[10:13] <geeksauce> http://paste.ubuntu-nl.org/26315/
[10:14] <wols> Steffen: if you want a firewall. get a router. if the malware is already on your PC, no firewall ever can really help you
[10:14] <Steffen> hmmm I was actually more concerned with hackers, but I suppose they wouldn't want to hack a private machine
[10:14] <Dunas> Now I'm getting an error saying "No versions of ndiswrapper found"
[10:14] <newtubuntu> Bassetts, if its not in System Tools, does it mean it did not install properly ?
[10:14] <Ayarcy> Steffen: Of course they would.
[10:14] <Bassetts> newtubuntu, what did you do to install it
[10:14] <Steffen> ayarcy: Seriously and why ?
[10:15] <Ayarcy> Steffen: Most zombies and spam servers are private, home computers.
[10:15] <Bassetts> Sr
[10:15] <wols> geeksauce: that is not your faulty /etc/exports
[10:15] <Ayarcy> Steffen: Find one, crack it, hide in it, and add it to your zombie army.
[10:15] <Steffen> wols: I have a router, though one without firewall - my only "security" is the NAT forward
[10:15] <Steffen> ayarcy: true, but aren't most of those infected through software
[10:15] <pha|con> Dunas: are you typing ndiswrapper-common or just ndiswrapper?
[10:15] <niuq> help, with evolution, i cant connect to my email servers
[10:15] <newtubuntu> Bassetts, if its not in System Tools, does it mean it did not install properly ?
[10:15] <geeksauce> wols no, it is the errors that it throws when i try to restart NFS server
[10:15] <Dunas> wols: I used the command you gave me to install ndiswrapper, it seemed to have installed, but when I type either ndiswrapper or ndiswrapper-common neither one works.
[10:15] <Ayarcy> Steffen: How they get in isn't the issue.  You said you didn't think they wanted in.
[10:15] <Bassetts> newtubuntu, what did you do to install it
[10:15] <constantine> Does anyone know if there is a way to control network-manager from the terminal without having the systray applet?
[10:16] <wols> Steffen: a hacker cannot connect to a closed port. so if a port is closed to the internt which is easily doable in ubuntu, ther is nothing a hacker can do
[10:16] <wols> Steffen: do you have a router?
[10:16] <Dunas> pha|con: I was typing ndiswrapper when I got the error that stated it was not installed.
[10:16] <newtubuntu> I installed VMWare from the Synaptic installer, and I can't find it anywhere in System Tools, is this normal ?
[10:16] <geeksauce> wols, i'll pastebin my exports file too though
[10:16] <wols> newtubuntu: dpkg -L vmware-player |grep bin
[10:16] <pha|con> Dunas: you have to find out what chipset your wireless card uses and get the windows drivers for that in order to install them for use in linux
[10:16] <Steffen> wols: Didn't know that with the closing of ports :) I have a router however it has no firewall functions I believe
[10:16] <Steffen> Ayarcy: True I didn't formulate myself very well
[10:16] <uniquez> hi
[10:16] <GizDrak> what would make gparted give a nagative value for a partition size?
[10:16] <newtubuntu> wols, thank you. What will this do ?
[10:17] <wols> Steffen: your ubuntu has what IP? 192.168.x.x?
[10:17] <Dunas> pha|con: And how do I do that? Pardon my ignorance.
[10:17] <wols> newtubuntu: man dpkg
[10:17] <Steffen> wols: I'm actually running at 10.0.0.x
[10:17] <wols> newtubuntu: it will tell you where the program to run vmware player is
[10:17] <Bassetts> newtubuntu, try opening terminal and typing vmware
[10:17] <pha|con> Dunas: do you know the model of wireless card you have?
[10:17] <capitalist> i am having trouble making a driver: http://dpaste.com/12551/. how do i fix the problem?
[10:17] <capitalist> i mean compiling
[10:17] <wols> Steffen: same thing. that means it has a firewall. only ports you forward on your router can be open to the internet. none other
[10:17] <capitalist> the driver
[10:17] <newtubuntu> wols, I did what you said, it says the package is not installed
[10:17] <uniquez> i bet this has been asked for more than one time, but: is there any way to update a breezy to any newer version?
[10:17] <Dunas> pha|con: I only know it's a Broadcom, I don't know anything beyond that.
[10:17] <constantine> capitalist: It appears that you don't have glibc installed.
[10:18] <geeksauce> http://paste.ubuntu-nl.org/26317/
[10:18] <constantine> capitalist: Did you install build-essential?
[10:18] <wols> capitalist: install build-essential
[10:18] <niuq> !help, using evolution
[10:18] <Steffen> wols: well it doesn't forward anything currently, so I guess it should be ok then - nice :)
[10:18] <capitalist> i tried, but it does not appear to be in the repository
[10:18] <pha|con> Dunas: open a terminal and type lspci.  you should see something listed as an ethernet controller...
[10:18] <elYase>  hey, where is my modprobe config file?
[10:18] <wols> geeksauce: no space after the hostname. also, checked man 5 exports?
[10:18] <uniquez> the breezy archive is down
[10:19] <capitalist> i also tried to install a downloaded package from debian, but the dependencies could not be satisfied
[10:19] <constantine> elYase: Probably /etc/modprobe.d/ ?
[10:19] <Bassetts> newtubuntu, did you install vmware server or vmware player?
[10:19] <uniquez> and i want to update to a newer version
[10:19] <wols> elYase: /etc/modules you mean?
[10:19] <uniquez> can anyone help me please?
[10:19] <Sherlock> hi, where do i go to disable that progress ubuntu bar, that starts as u boot fiesty???
[10:19] <Sherlock> and how do i disable gdm, and just boot to console
[10:19] <j0nas`> can anybody help me set up gcc-2.95?
[10:19] <wols> constantine: he cetainly has glibc installed. hard to run ubuntu otherwise
[10:19] <elYase> wols, constantine , well in #ALSA they told me to ask this
[10:19] <Bassetts> Sherlock, do you never want to use gdm?
[10:19] <wols> newtubuntu: you said you installed vmware-palyer
[10:19] <constantine> wols: Err, yes - I meant glibc-dev
[10:19] <wols> newtubuntu: you said you installed vmware-player
[10:20] <uniquez> j0nas`: hehhe lol i was trying just the same thing - then i recognized that im pretty much fucked because breezy is dead
[10:20] <Dunas> 03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 10)
[10:20] <Dunas> 05:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
[10:20] <Dunas> I got that.
[10:20] <elYase> wols, constantine , i have to add an option to this file
[10:20] <Dunas> I was apparently wrong about the Broadcom.
[10:20] <wols> constantine: that does not exist.
[10:20] <Sherlock> Bassetts: just disable it, but whats is your advice
[10:20] <constantine> wols: True, it has some other name.
[10:20] <yehweh> uniquez: doesnt sudo apt-get dist upgrade work?
[10:20] <capitalist> wols: build-essential cannot be found
[10:20] <pha|con> Dunas: the second one is your wireless card.
[10:20] <constantine> wols: He is missing the include files for glibc.
[10:20] <uniquez> yeg
[10:20] <chaosmystic> anyone got a link to good stable 3rd party repos?
[10:20] <Bassetts> Sherlock, well if you just want to use terminal a server install would of done, but to stop gdm running at startup you will need to remove the init script for it
[10:21] <j0nas`> uniquez: so what did you do?
[10:21] <AisDeck> Ran the memory test
[10:21] <Steffen> Anyone knows how to setup an IPSEC client to connect to a Windows VPN Server ?
[10:21] <Sherlock> gotcha
[10:21] <Dunas> pha|con: Understood. So I open Firefox, go to the Realtek website and find the driver?
[10:21] <uniquez> yehweh: nope, 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[10:21] <constantine> capitalist: What does your sources.list look like?
[10:21] <nconlon> hello
[10:21] <nikin> hy : anyone here using LILO with ubuntu?
[10:21] <pha|con> Dunas: http://ubuntuforums.org/showthread.php?p=2536955
[10:22] <wols> constantine: it's called libc6-dev. and tue proper way to install all that stuff is build-essential
[10:22] <Bassetts> Sherlock, to remove an init script, iirc you run "sudo update-rc.d FOO remove" FOO being the script name
[10:22] <uniquez> j0nas`: i tried to install it manually but i ran into problems... now my priority task is to get a system with a package system... i dont want to live in stone age
[10:22] <constantine> wols: Yes
[10:22] <constantine> wols: That is why I asked him if he had installed it
[10:22] <geeksauce> wols, fixed that space.  still getting "syntax error: bad option list" when i restart NFS server
[10:23] <capitalist> wols: it looks like all three are checked
[10:23] <wols> capitalist: then something is wrong; http://packages.ubuntu.com/cgi-bin/search_packages.pl?keywords=build-essential&searchon=names&subword=1&version=feisty&release=all
[10:23] <wols> !info build-essential
[10:23] <ubotu> build-essential: informational list of build-essential packages. In component main, is optional. Version 11.3 (feisty), package size 6 kB, installed size 48 kB
[10:23] <uniquez> btw: its pretty much irresponsible for a distribution to kill the support for a OS that is installed a few million times
[10:23] <daquino> what is the difference between xmkmf and mkmf ?
[10:23] <yehweh> uniquez: THis might be a really stupid idea. Will it work if you changed the names of the repo from dapper to edgy
[10:23] <wols> !breezy
[10:23] <ubotu> breezy is the third release of Ubuntu. Version 5.10, codename "Breezy Badger".  Upgrading to !dapper : https://help.ubuntu.com/community/DapperUpgrades
[10:23] <daquino> and my usb pen's dont seem to show up
[10:23] <elYase>  hey, where is my modprobe config file?
[10:23] <wols> elYase: /etc/modutils/
[10:23] <nikin> i am using LILO as bootloader and when i pass the option vga=791 to the kernel.... nothing shows up in the console... using grub its working
[10:24] <Nott32> Hello
[10:24] <elYase> wols, wich file?
[10:24] <uniquez> yehweh: my current distro is BREEZY... dunno what happens if i try to install a dapper -> edgy update :(((
[10:24] <wols> elYase: any. it's not just a file anymore
[10:24] <Nott32> can anyone tell me how to get LAN working in Wine (Warcraft III)
[10:24] <Nott32> ?
[10:24] <wols> uniquez: it won't work.
[10:24] <capitalist> wols: got it, thanks
[10:25] <wols> uniquez: as the factoid says: upgrade to dapper first, or better yet: reinstall
[10:25] <constantine> uniquez: It can work if you are insane, but it is a very bad idea.
[10:25] <F2> is here anybody german?
[10:25] <wols> !de | F2
[10:25] <yehweh> naah I thought you were on dapper. You should chage it to dapper.Well I though my sugestion was stupid but I guess that is the way to do it
[10:25] <ubotu> F2: Deutschsprachige Hilfe fuer Probleme mit Ubuntu, Kubuntu und Edubuntu finden Sie in den Kanaelen #ubuntu-de, #kubuntu-de, #xubuntu-de und #edubuntu-de
[10:25] <newtubuntu> does anyone have a WORKING Java Runtime Environment plugin with Firefox on Feisty ?  I successfully installed JRE1.6, but it doesn't plug into Firefox.  Any help ?
[10:25] <fooey> When I tried to run a .bin file it said: Syntax error: "&" unexpected (expecting ")"), what should I do?
[10:25] <jrib> newtubuntu: did you install sun-java6-plugin?
[10:25] <Nott32> Can anyone tel me how to get LAN working in Warcraft II im using Wine
[10:25] <cchance1> gius
[10:25] <cchance1> guys
[10:25] <uniquez> wols, oh doooods... why did they do that? i mean.. how can they delete the complete archive ... breezy is only 2 years old
[10:26] <CeruM>  "no root system file is defined" any thoughts on this?
[10:26] <cchance1> how do i force the latest version of MONO
[10:26] <Ayarcy> !repeat | Nott32
[10:26] <ubotu> Nott32: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. You can search https://help.ubuntu.com or http://wiki.ubuntu.com while you wait. Also see !patience
[10:26] <cchance1> synaptic only has 1.2.3
[10:26] <Dunas> pha|con: Thank you, I'll try to do that without completely destroying the computer. XD
[10:26] <elYase> wols, hey there are 2 files, i dont know wich do i have to change
[10:26] <wols> newtubuntu: if you haven't got any results with dpkg -l | grep java, then no java is installed
[10:26] <wols> elYase: I told you already. an
[10:26] <nikin> uniquez : supporting time is something evil... thats why i just use the LTS release
[10:26] <pha|con> Dunas: for the most part it looks like that particular card is a pain to get working.  you may want to look into getting a different card.
[10:27] <Nott32> just send me a pm
[10:27] <mqo> Anybody know how to increase WIne Hard Drive space?
[10:27] <wols> pha|con: it's most probably a notebook. built in
[10:27] <uniquez> nikin: LTS ?
[10:27] <daquino> #winehq
[10:27] <wols> uniquez: the ubuntu version with 5 years support time.
[10:27] <mqo> tkz
[10:27] <Dunas> pha|con: Or a different Linux distro- the card is integrated.
[10:27] <nikin> uniquez: yet Dapper is the Long Term Support release
[10:27] <kbrooks> uniquez, long term support
[10:27] <uniquez> thanks
[10:27] <wols> Dunas: what distro? cause that's a GPL violation and therefore illegal
[10:27] <uniquez> ARGGG
[10:27] <nikin> uniquez: LTS versions are supported for a lot more time than others
[10:28] <uniquez> fuck fuck fuck.... is there no way for me to get my system updated?
[10:28] <uniquez> i SO dont want to reinstall all the stuff
[10:28] <PriceChild> !ohmy | uniquez
[10:28] <ubotu> uniquez: Please watch your language and keep this channel family friendly.
[10:28] <Doctor> someone needs to make an ArrrrrrPirates distro :_
[10:28] <constantine> elYase: The modprobe config files are in /etc/modprobe.d/ ; try the options file.
[10:28] <uniquez> PriceChild: sory
[10:28] <Dunas> wols: I'm currently trying Ubuntu... I have yet to install it, I'm still booting from LiveCD so I don't damage my XP if something like this goes wrong.
[10:28] <jrib> !upgrade > uniquez (see the private message from ubotu)
[10:28] <wols> uniquez: have you tried to update to dapper?
[10:28] <cchance1> neone
[10:28] <Dunas> wols: Ubuntu 7.04
[10:28] <cchance1> easy way to get mono 1.2.4?
[10:28] <uniquez> wols, how can i do this?
[10:28] <cchance1> is their a special repository perhaps?
[10:29] <uniquez> jrib: thanks
[10:29] <wols> Dunas: I asked what distro has support for the broadcom integrated?
[10:29] <Llama|Who|Took|M> lol? whole fcking channel with nobody + or higher? lol
[10:29] <Sh3r1ff> Llama|Who|Took|M: you'll see them when it's necessary ;)
[10:29] <pha|con> Dunas: type lsmod | grep r818 in the terminal and tell me if you get any output
[10:29] <Dunas> wols: No, ahh. Sorry. I should've clarified. The laptop's card is integrated into the board.
[10:29] <wols> Llama|Who|Took|M: stop that. ops are around. they don't have to be @ all the time
[10:29] <Llama|Who|Took|M> lol
[10:29] <Llama|Who|Took|M> ah ok ^_^
[10:29] <robdeman> hi folks.. where can I download a ndiswrapper package for Ubuntu Fiesty? need to get my wireless usb to work
[10:30] <Llama|Who|Took|M> i dont even know what im doing here so...
[10:30] <jrib> !ndiswrapper > robdeman (see the private message from ubotu)
[10:30] <Llama|Who|Took|M> and i dont know whats this channel about ^_^
[10:30] <Nott32> ...
[10:30] <wols> robdeman: same palce you install the other stuff
[10:30] <Sh3r1ff> Llama|Who|Took|M: http://www.ubuntu.com ;)
[10:30] <Llama|Who|Took|M> hmm
[10:30] <Doctor> I wonder if jrib is a bot or has a macro :D
[10:30] <wols> Llama|Who|Took|M: it's about ubuntu support, a linux distro. do you have a ubuntu support question?
[10:30] <Ayarcy> !ontopic | Llama|Who|Took|M
[10:30] <ubotu> Llama|Who|Took|M: #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome!
[10:30] <Nott32> can anyone tell me how I can get LAN working in Warcraft 3? I am using Wine with Ubuntu 7.04
[10:31] <Llama|Who|Took|M> ah
[10:31] <Dunas> I typed that in and hit enter, but I think that the console froze as a result.
[10:31] <wols> Doctor: it's a script since he has to tell it to people so often
[10:31] <wols> !ndiswrapper | dunas
[10:31] <ubotu> dunas: Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs
[10:31] <Dunas> No, it just didn't give output.
[10:31] <Doctor> ah
[10:31] <Ayarcy> !wine | Nott32
[10:31] <ubotu> Nott32: wine is a compatibility layer for running Windows programs on GNU/Linux. See https://help.ubuntu.com/community/Wine for more information.
[10:31] <Ayarcy> Nott32: Have you looked there?
[10:31] <Bassetts> is there a way to make an image of a ntfs partition?
[10:31] <Llama|Who|Took|M> Nott32: it worked for me right away?
[10:31] <wols> Nott32: #winehq and the wine appdb
[10:31] <Doctor> like /noob Doctor ndiswrapper or /ndiswrapper Doctor
[10:31] <illmortal> Anyone here use Adesklets? I'm having a problem with the SystemMonitor adesklet! Please help!
[10:31] <wols> Bassetts: dd if=/dev/sdaX of=/image.file
[10:32] <constantine> !ubotu | Doctor
[10:32] <ubotu> Doctor: I am ubotu, all-knowing infobot. You can browse my brain at http://bots.ubuntulinux.nl - Usage info: http://wiki.ubuntu.com/UbuntuBots
[10:32] <Nott32> went to the wine IRC they told me to come here
[10:32] <dfgas> anyone use the r8185 wireless card, if so does it work and if so how?
[10:32] <Bassetts> wols, thanks
[10:32] <Dunas> pha|con: Using lsmod | grep r818, I got no output.
[10:32] <pha|con> Dunas: try typing sudo modprobe r818x
[10:32] <Doctor> hmm
[10:32] <illmortal> Anyone here use Adesklets? I'm having a problem with the SystemMonitor adesklet! Please help!
[10:32] <wols> Bassetts: read the manpage and increase blocksize tho (bs=...) or it will take ages
[10:32] <constantine> Doctor: Ubotu also sends msgs on command
[10:32] <Doctor> haha
[10:33] <Bassetts> wols ok, will the image be restorable with loading an OS?
[10:33] <wols> Dunas: what card do you have now? did you check=
[10:33] <geeksauce> wols, i don't see anything in the man pages that would indicate a problem
[10:33] <Doctor> constantine: im guessing at how jrib has his thing set up
[10:33] <pha|con> wols: he has a realtek chipset RT-8185
[10:33] <wols> Bassetts: you need a dd. it's a1:1 image of the disk
[10:33] <Dunas> pha|con: No luck there, either.
[10:33] <Podge_OC> I'm trying to add a directory to the $PATH to play around with shell scripts. which file do I have to edit to do this?
[10:33] <pha|con> Dunas: what was the output?
[10:33] <Llama|Who|Took|M> meh looks like alot of helping people here :)
[10:33] <Doctor> Podge_OC: edit your .bash_profile or .bashrc
[10:33] <constantine> Doctor: You mean he has a bot in addition to ubotu?
[10:34] <Doctor> constantine: an alias, or something
[10:34] <GizDrak> !raid
[10:34] <ubotu> Raid and LVM --> very easy guide for alternate CD : http://users.piuha.net/martti/comp/ubuntu/raid.html Tips and tricks for RAID and LVM can be found on https://help.ubuntu.com/community/RaidConfigurationHowto and http://www.tldp.org/HOWTO/LVM-HOWTO
[10:34] <Dunas> pha|con: There was no output.
[10:35] <Nott32> btw on the wine appdb they say to do the following: "
[10:35] <Nott32> Add a default gateway.
[10:35] <Nott32> - OR -
[10:35] <Nott32> Route 255. 255. 255. 255 to your local network.
[10:35] <Doctor> -> /noob constantine ndiswrapper = /say !ndiswrapper > constantine (please check your private message from uboto)
[10:35] <pha|con> Dunas: hmm...there should have been something, whether it failed or succeded
[10:35] <constantine> Doctor: ah
[10:35] <andre_chinfrim> i've just installed xubuntu 7.04 i386, and it has a little problem: it recognizes my USB speakers but there is no sound... help me please.
[10:35] <Nott32> Add a default gateway.  - OR -  Route 255. 255. 255. 255 to your local network. ANY HELP Please?
[10:36] <pha|con> Dunas: actually, maybe not.  try doing lsmod | grep r818 again
[10:36] <frolle> I have a folder. How do i make do folder to a tar.gz archive?
[10:37] <Dunas> pha|con: Command not found error
[10:37] <jrib> frolle: tar cxvf folder.tar.gz folder   or... right click -> create archive
[10:38] <Doctor> Dunas: no lsmod for yous?
[10:38] <yehweh> frolle: tar -ccvf
[10:38] <pha|con> Dunas: sure you're typing it correctly? should be:  lsmod | grep r818
[10:38] <Dunas> pha|con: I'll try it again.
[10:38] <Nott32> Ok so according to the appdb post on W3 to set up multiplayer LAN I havee to add a default gateway OR Route 255. 255. 255. 255 to your local network.
[10:38] <M1mmo> HI!
[10:38] <tobyr> Hey guys, anyone lost 'nvidia' functionality during a recent upgrade?
[10:38] <jrib> frolle: tar czvf folder.tar.gz folder   or... right click -> create archive
[10:38] <geeksauce> wols, ok, i think i fixed my exports file right
[10:39] <Nott32> but I have no clue on how to do this and can not find any guides
[10:39] <tobyr> Mine doesn't load anymore, had to change back to nv
[10:39] <Doctor> eee
[10:39] <M1mmo> can some1 help me with the cfg of mouse wheel?????
[10:39] <Nott32> http://appdb.winehq.org/appview.php?iVersionId=1177
[10:39] <Doctor> when is nfs going to be replaced :)
[10:39] <pha|con> Dunas:  i just want to be sure cause you did it a few minute ago, and i don't think lsmod disappeared in that time :)
[10:39] <Dunas> pha|con: Okay, still no output.
[10:39] <frolle> jrib: login manager now says it is now a tar archive..
[10:40] <Dunas> pha|con: I accidentally typed the wrong thing last time.
[10:40] <jrib> frolle: huh?  What are you trying to do?
[10:40] <frolle> jrib: trying to change the login picture
[10:40] <pha|con> Dunas:  and when you did modprobe it left no output and went straight back to a new, empty line?
[10:41] <jrib> frolle: the theme for gdm?
[10:41] <M1mmo> hey sum1 free!!??
[10:41] <jrib> !ask | M1mmo
[10:41] <ubotu> M1mmo: Don't ask to ask a question. Just ask your question :)
[10:41] <M1mmo> sry ok
[10:41] <frolle> jrib: guess so
[10:41] <GizDrak> stupid question how come when I format 1 TB has ext3 it uses up 17gbs
[10:41] <pha|con> Dunas: sudo modprobe r818x
[10:41] <tobyr> Anyone else's X server go screwy when doing a kernel update?
[10:41] <M1mmo> how can I change the mapping of mouse wheel?
[10:41] <Podge_OC> Doctor, where do I find .bash_profile or .bashrc
[10:41] <jrib> frolle: they need to have a certain structure (that I don't know offhand), where did you get it?
[10:41] <Dunas> pha|con: Yes, let me try it again.
[10:41] <Driven10> GizDrak:  no drives have the space they're sold at
[10:41] <Pconfigi> hey, could anybody help me with setting up a proxy in my network?
[10:41] <frolle> jrib: at gnome art
[10:42] <Driven10> IE 250gb gives you 233...
[10:42] <jrib> frolle: link?
[10:42] <M1mmo> coz with scroll up it goes back of internet page
[10:42] <frolle> jrib: i just wanted to change the background.png
[10:42] <Doctor> Podge_OC: ~/.bashrc
[10:42] <Dunas> pha|con: same result.
[10:42] <frolle> jrib: http://gnome-look.org/content/show.php?content=33520
[10:42] <niuq> hello someone can tell me some ftp client's besides gftp?
[10:42] <jrib> niuq: nautilus?
[10:42] <Dunas> pha|con: My terminal currently looks like this: ubuntu@ubuntu:~$ lsmod | grep r818
[10:42] <Dunas> ubuntu@ubuntu:~$ sudo modprobe r818x
[10:42] <Dunas> ubuntu@ubuntu:~$
[10:42] <yehweh> !gpartd >GizDrak
[10:42] <Pconfigi> niuq: Filezilla
[10:42] <DeFirence> lo all, ive been told someone here could maybe give me an idea if what i wanna do is even possible. Ok, i want to use wine to run Warcraft III in linux and at the same time, use wine to run a windows application that will perform functions in warcraft 3, i also would like to run this in multiple sessions on linux, could someone please tell me if this would be remotely possible :) thanks alot
[10:42] <niuq> jrib: nautilus? ok
[10:43] <pha|con> Dunas: it should be loading the module, then.  does it on my end.  does lsmod | grep r818 still come up empty?
[10:43] <jrib> niuq: yeah, the file manager can connect to ftp servers if you go to file -> connect to server
[10:43] <Nott32> So can anyone tell me how to Add a default gateway.  - OR -  Route 255. 255. 255. 255 to your local network.
[10:44] <Dunas> No, this time it returned results.
[10:44] <Doctor> Nott32: how is your IP address set in the first place?
[10:44] <predaeus_> Nott32, something along the lines of "sudo add default gw IPADDY"
[10:44] <Dunas> pha|con: "r818x                  89996  0
[10:44] <Dunas> ieee80211_rtl          80392  1 r818x"
[10:44] <Nott32> DHCP
[10:44] <niuq> jrib: ok thx
[10:44] <jrib> frolle: it "just works" if I go to system -> administration -> login window, local tab, press the "add" button and select 33520-Simple Elegance.tar.gz that I downloaded
[10:44] <predaeus_> Nott32, sry "sudo route add default gw IPADDY"
[10:44] <Doctor> predaeus_: sudo route add ...
[10:44] <niuq> Pconfigi: Filezilla has gui?
[10:44] <pha|con> Dunas: then you have the driver loaded. you should be able to connect to a wireless network via network-manager
[10:44] <Pconfigi> yes
[10:45] <Pconfigi> niuq: yes
[10:45] <frolle> jrib: Yeah, it works, but i want to change background.png..
[10:45] <Doctor> filezilla is in apt?
[10:45] <Doctor> score!
[10:45] <Pconfigi> if you add universe :)
[10:45] <pha|con> Dunas: but according to quite a lot of people you'll have trouble if it's a secured network
[10:45] <M1mmo> hey sum1 free!!??
[10:45] <M1mmo> how can I change the mapping of mouse wheel?
[10:45] <Puppstar> hi, is there a way to "nohup" a process after it's already running?
[10:45] <niuq> Pconfigi: what do you mean by add universe?
[10:45] <ph1zzle> hey guys
[10:45] <Doctor> I've probably got all the way up to multiverse
[10:45] <geeksauce> wols, it works!  finally.  it was just an issue of spaces after commas and after the hostname.  thanks man
[10:45] <jrib> frolle: ah I see.  So you've untarred, replaced the background.png, and created a tar.gz again but it gives you an error?
[10:45] <Nott32> sudo route add default gw IPADDY
[10:45] <Podge_OC> Thanks Doctor:)
[10:45] <ph1zzle> does anyone know of a way to install a package for another architecture?
[10:45] <Nott32> SIOCADDRT: Network is unreachable
[10:45] <jrib> ph1zzle: why?  what package?
[10:46] <frolle> jrib: exactly :)
[10:46] <ph1zzle> case and point if I want to install a 32 bit app on a 64 bit system?
[10:46] <Doctor> !universe > niuq (no idea if this'll be useful or not but I must use the bot every once in awhile to fit in)
[10:46] <ph1zzle> mplayer and mplayer-plugin
[10:46] <Dunas> pha|con: It's unsecured.
[10:46] <Pconfigi> niuq: Well you should check out if Filezilla is listed in apt, if itsn't not we could help you further
[10:46] <niuq> Dctor ok..
[10:46] <Dunas> pha|con: We never could get it secured anyway, so we simply left it open.
[10:46] <ph1zzle> jrib, long story short I run 32 bit firefox for flash and now I want mplayer-plugin to work as well
[10:47] <DeFirence> any1?
[10:47] <pha|con> Dunas:  well, give it a shot then.
[10:47] <Nott32> I did this sudo route add default gw 255.255.255.255 and got this SIOCADDRT: Network is unreachable
[10:47] <Dunas> pha|con: How?
[10:47] <jrib> frolle: works ok here, I edited background.png with gimp, saved, ran  'tar czvf foo.tar.gz Simple\ Elegance' and installed foo.tar.gz without a problem
[10:47] <Doctor> Nott32: why are you trying to set a default gateway of that ;_;
[10:47] <niuq> Pconfigi: well it is listed in apt
[10:47] <ph1zzle> Nott32, I don't think thats a valid ip address
[10:47] <ph1zzle> I mean I know the nums are proper
[10:47] <Nott32> I want to set up LAN
[10:47] <niuq> Pconfigi: i will try it out
[10:48] <Pconfigi> niuq: Ok then you can just install it :)
[10:48] <ph1zzle> but it just doesn't look ICANN worthy
[10:48] <Nott32> in Warcraft 3
[10:48] <niuq> Pconfigi: yeah, thank you
[10:48] <jrib> ph1zzle: well I'd recommend using nspluginwrapper for flash, that way you don't need to mess with a 32bit browser
[10:48] <Pconfigi> niuq: You're welcome
[10:48] <Nott32> and thats waht this page says
[10:48] <NeXtDaY> hi all
[10:48] <pha|con> Dunas: go to system > administration > networking
[10:48] <Nott32> "If you try to play using the Local Area Network option, and do not see a game hosted from your machine on another or vice versa, and you are in the same subnet, this is likely caused by not having a default gateway. The game relies on sending UDP packets to the broadcast address and Linux will not send them unless there is a default gateway or another rule to handle them. To fix it, there are two methods:"
[10:48] <SpeakerMania> Hey, I am having problems burning CD-R disks with my Sony DVD-RW DW-U18A drive. I'm having this issue in Widnows, too. Can anyone help me find like a driver?
[10:48] <Nott32> Add a default gateway.  OR Route 255. 255. 255. 255 to your local network.
[10:48] <jrib> ph1zzle: http://www.janvitus.netsons.org/2007/01/15/nspluginwrapper-adobe-flash-player/ then mplayer is available to you as 64bit of course, you just run the 32bit flash in your 64bit browser
[10:49] <pha|con> Dunas: i'm in a terminal remotely connected to my laptop on a windows machine, so i may not be able to help you out verbatim
[10:49] <Doctor> Nott32: are you using a router right now?
[10:49] <Nott32> Im behind a router
[10:49] <Dunas> pha|con: Alright, it shows a wireless network now, unlike earlier. However, it's not showing itself as connected.
[10:49] <Doctor> Nott32: set both computers up for internet and you'll have a default gateway
[10:49] <Nott32> and the other computer is also behind the same router
[10:49] <Doctor> (the router)
[10:50] <pha|con> Dunas: you have to choose a wireless network to connect to.  there should be a button that says properties for you to click....
[10:50] <SpeakerMania> Hey, I am having problems burning CD-R disks with my Sony DVD-RW DW-U18A drive. I'm having this issue in Windows, too. Can anyone help me find like a driver?
[10:50] <Jimmey> I can share my network connections on a particular device by enabling network connection sharing in Firestarter - How can I do this using the Iptables command, if I can't get an Xserver runing?
[10:50] <DeFirence> can any1 help me??
[10:50] <pha|con> Dunas: also make sure the checkbox that enables the connection is checked
[10:50] <wols> Nott32: you have a router that meas you have a dfeault gateway. /sbin/route | grep default. see?
[10:50] <frolle> jrib: it still gives me an error
[10:50] <ihateusernames> hi, i know Vista uses a new NTFS format, but when i go to Live CD of Ubuntu, it says theres was a problem in the kernel...?
[10:50] <NeXtDaY> when I go to System > Preferences > Desktop Effects I get this error "The Composite extension is not available".. any suggestions, please?
[10:51] <Dunas> pha|con: Testing connection.
[10:51] <Dunas> pha|con: Just in case, since it's still plugged in.
[10:51] <wols> slackwarelife: there is no "driver" if you have the same issue in windows it's most likely a hardware problem. buy a new one
[10:51] <ihateusernames> and the same CD works fine on my other computer running XP
[10:51] <south01> hi, i have some problem with wireless connection
[10:51] <ph1zzle> thanks jrib, I think I tried it before though and it never played
[10:51] <Dunas> pha|con: I did.
[10:51] <jrib> frolle: what if instead of replacing the background.png, you scribble on it with gimp and then save it.  Can you create a working tar.gz this way?
[10:51] <ph1zzle> I have had this 32bit browser running for 6+ months
[10:51] <Nott32> Ok I know the problem now, its not linux its the way im connected to the internet, hehehe
[10:51] <wols> DeFirence: not possible
[10:51] <Dunas> pha|con: The only problem is that I'm sitting less than a foot from the router and it shows it as having absolutely no connection strength.
[10:51] <Nott32> thank you for your time!
[10:51] <DeFirence> whys that wols?
[10:51] <GizDrak> do I need to recompile my kernel to support the raid-5 my server is configured with?
[10:51] <wols> DeFirence: linux could run an application which cheats in wc3 tho if you want
[10:52] <jrib> ph1zzle: I use nsplugwrapper myself, just recommending what I think is better.  The wiki has a guide on setting up a chroot though, I can send you the docs on that
[10:52] <DeFirence> um..
[10:52] <pha|con> Dunas: what is telling you you don't have any signal strength?
[10:52] <wols> GizDrak: depends on the raid. usually no
[10:52] <SpeakerMania> Hey, I am having problems burning CD-R disks with my Sony DVD-RW DW-U18A drive. I'm having this issue in Windows, too. Can anyone help me find like a driver?
[10:52] <DeFirence> that cheats???????????????
[10:52] <frolle> jrib: the tar archive is working. When i want to import it gives em this error: not tar.gz or tar archive.
[10:52] <DeFirence> i dont wanna cheat?
[10:52] <wols> GizDrak: what raid card?
[10:52] <DeFirence> i wrote a code that automates warcraft
[10:52] <wols> DeFirence: there is only one reason to do what you want, that is cheating
[10:52] <jrib> frolle: right, by "working" I meant "able to add as a theme"
[10:52] <wols> DeFirence: and not getting caught by warden
[10:52] <DeFirence> rofl
[10:52] <DeFirence> no wols
[10:52] <Llama|Who|Took|M> automates warcraft?
[10:52] <Llama|Who|Took|M> o.o
[10:52] <DeFirence> listen to me
[10:52] <SpeakerMania> http://www.lissaexplains.com/forum/showthread.php?t=64878 Can anyone help?
[10:52] <frolle> jrib: then no :)
[10:52] <Pconfigi> speakermania: If you have the problem on windows too, are you sure your cd writer isn't broken?
[10:52] <jrib> frolle: join me in #ubuntu-classroom
[10:53] <SpeakerMania> Pconfigi, see the link. A lot of people are having this problem.
[10:53] <Dunas> pha|con: The Network Admin window. Shows the "linksys" network at 0%. In addition, when it attempted to connect, it said it was attempting, and approximately 45 seconds later it said it could not connect.
[10:53] <GizDrak> wols: it is a LSI raid controller let me go find the paper work on the model
[10:53] <wols> DeFirence: so why do you need a 2nd session?
[10:53] <Pconfigi> SpeakerMania: i'll take a look
[10:53] <DeFirence> it automates the warcraft hosting process, effectively creating a dedicated war3 host, and i wanna run that on a server in a datacenter, i own a warcraft III pvpgn server
[10:54] <south01> how can i run xp on ubuntu?
[10:54] <pha|con> Dunas: type dmesg in the terminal and see what the very last fe lines of output are
[10:54] <wols> DeFirence: and why can't it run in the same windows session?
[10:54] <pha|con> *few
[10:54] <dragonfyre13> Hello all
[10:54] <DeFirence> multiple sessions means i can have more then 1 dedicated server
[10:54] <Sh3r1ff> south01: vmware
[10:54] <jrib> !virtualizers > south01 (see the private message from ubotu)
[10:54] <wols> DeFirence: or rather wine
[10:54] <illmortal> Hey guys how do I check my temperature of my processor through Terminal?!
[10:54] <geeksauce> i have an NFS share working fine on this box, but i'd like to change the name of the share, since it's three folders deep.  is there a way to do this?
[10:54] <Dunas> pha|con: [ 3563.960000]  rtl8180: Card successfully reset
[10:54] <Dunas> [ 3564.892000]  ADDRCONF(NETDEV_UP): wlan0: link is not ready
[10:54] <Dunas> [ 3564.912000]  sky2 eth0: enabling interface
[10:54] <Dunas> [ 3564.912000]  sky2 eth0: ram buffer 4K
[10:54] <Dunas> [ 3566.652000]  sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[10:54] <Dunas> [ 3580.168000]  eth0: no IPv6 routers present
[10:55] <NeXtDaY> when I go to System > Preferences > Desktop Effects I get this error "The Composite extension is not available".. any suggestions, please?  sorry for repeating!@
[10:55] <jrib> !paste | Dunas
[10:55] <ubotu> Dunas: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic)
[10:55] <wols> DeFirence: it depends how the external program communicates with WC3
[10:55] <KR-data> how can I play encrypted DVDs? Xine just crashes, VLC does nothing, mplayer freezes, kaffeine crashes, so what can I do?
[10:55] <Dunas> jrib: Sorry!
[10:55] <DeFirence> u see, my script emulates keyboard and mouse movements etc
[10:55] <Dunas> jrib: Thank you.
[10:55] <Doctor> KR-data: did you install decss?
[10:55] <illmortal> Hey guys how do I check my temperature of my processor through Terminal?!
[10:55] <wols> NeXtDaY: what videdriver?
[10:55] <DeFirence> so currently i need a whole pc per dedicated host pc
[10:55] <Pconfigi> SpeakerMania: Have you tried upgrading your firmware?
[10:55] <ihateusernames> so are there known issues with Ubuntuu live CD loading on Vista
[10:55] <south01> thanx
[10:55] <Doctor> illmortal: check out lm-sensors
[10:55] <south01> which of them is better
[10:55] <KR-data> Doctor, I'll check just a sec
[10:55] <Sh3r1ff> south01: vmware
[10:55] <SpeakerMania> Pconfigi, sorry? Firmware?
[10:55] <wols> illmortal: mbmon for example
[10:55] <tbtroja> illmortal: cat /proc/acpi/thermal_zone/THRM/temperature
[10:55] <dont_drink_water> help how do i get drivers for ati rad 9200
[10:55] <NeXtDaY> wols: ati
[10:56] <illmortal> tbtroja!! thanks!!!
[10:56] <KR-data> Doctor, doesn't show up in Synaptic :S
[10:56] <wols> ihateusernames: no. vista and ubuntu are both OSes. they don't care about each other. especially the live CD
[10:56] <tbtroja> illmortal: no problem.
[10:56] <wols> NeXtDaY: ati or fglrx?
[10:56] <Pconfigi> SpeakerMania: All the first google hits i find on your cd player are talking about firmware. Firmware is actually the software that's loaded on your player. It's like the bios of a computer
[10:56] <ihateusernames> well when i try to load it from the Live CD, it says kernal errors
[10:56] <newtubuntu> OK I successfully installed my VMWare, I can now see and launch it in System Tools. Do I need to have an actual license/CD of Win XP, or can I use a free VMX prepared on www.easyvmx.com ?
[10:56] <SpeakerMania> ihateusernames, You boot off the LIVE CD, not use it in Vista.
[10:56] <wols> dont_drink_water: you already have them. the "ati" driver in dpkg-reconfigure xserver-xorg
[10:56] <pha|con> Dunas: so it sees the router but says it's signal strength is at 0% or did you type the router's ssid yourself?
[10:57] <south01> sh3rlff r u sure is it booting solution
[10:57] <south01> i typed !wmvare
[10:57] <wols> NeXtDaY: you need a XP license. it's illegal to run it otherwise
[10:57] <south01> it says player
[10:57] <ihateusernames> i know, im saying, i have a computer with Vista and another with XP, the one in Vista when i boot from cd->kernal error, one with xp->boots fine
[10:57] <Sh3r1ff> newtubuntu: you can use a vmx one
[10:57] <Dunas> pha|con: It sees the router but says its signal strength is at 0%, from less than a foot away.
[10:57] <SpeakerMania> Pconfigi, no, then, I haven't upgraded. Sony actually has no mention of this product anywhere on their site, and I haven't recieved replies to me e-mails.
[10:57] <wols> ihateusernames: no it has nothing to do with vista
[10:57] <Sh3r1ff> south01: vmware has also a server http://www.vmware.com
[10:57] <ihateusernames> ok
[10:57] <wols> Sh3r1ff: no. that's illegal
[10:57] <ihateusernames> what can it be?
[10:57] <wols> Sh3r1ff: unless he has a windows license
[10:57] <newtubuntu> Sh3r1ff:  VMX from www.easyvmx.com includes the OS itself ?
[10:58] <wols> ihateusernames: hardware ubuntu doesn't like, acpi, etc
[10:58] <south01> how can i make opera as a default browser
[10:58] <Doctor> KR-data: http://packages.ubuntu.com/feisty/utils/lm-sensors thats what I use
[10:58] <Sh3r1ff> wols: if you buy a computer you get a free windows, so it would surprise me if anyone wouldn't have one ;)
[10:58] <ihateusernames> but ive used the same CD with XP installed on my computer and it booted..
[10:58] <Hibame> Does the mysql need extra config outside of the install for unbuntu as I cant connect
[10:58] <Jimmey>  I can share my network connections on a particular device by enabling network connection sharing in Firestarter - How can I do this using the Iptables command, if I can't get an Xserver running?
[10:58] <pha|con> Dunas:  in the essid box where it says "linksys" try entereing "linksyss"  without the quotes
[10:58] <wols> Sh3r1ff: I didn't.  never did
[10:58] <tangopirat> i have problem joining the python channel so i will just ask a quick question her. Is it possible to make a tuple a global variable in python?
[10:59] <wols> tangopirat: yes
[10:59] <pha|con> Dunas: and enable roaming mode
[10:59] <dfgas> anyone use the r8185 wireless card, if so does it work and if so how?
[10:59] <KR-data> Doctor, I think that answer was for someone else :)
[10:59] <wols> Hibame: yes it does. you have to set up users
[10:59] <pha|con> dfgas: sudo modprobe r818x
[10:59] <Pconfigi> SpeakerMania: Take a look here, http://club.cdfreaks.com/showthread.php?t=125930, i think it won't be of much help but could be a starter atleast. I don't have any experience on your topic either, sorry
[10:59] <Hibame> wols: I did add a user and a table correctly
[10:59] <wols> dfgas: r818x krenel module
[10:59] <Dunas> pha|con: I did, it still connected me to the wired network, and now I don't think it can decide which one to use.
[10:59] <wols> Hibame: then nothing else is needed
[11:00] <Doctor> 13:55 < KR-data> Doctor, I'll check just a sec
[11:00] <ihateusernames> ok, nevermind, im going to use XP, screw Vista
[11:00] <newtubuntu> When trying to launch my VMX, I get the following error msg from VMWare:  Could not open /dev/vmmon : no such file or directory. Please make sure that the kernel module 'vmmon' is loaded.  ?
[11:00] <ihateusernames> thanks
[11:00] <Doctor> you started it
[11:00] <ihateusernames> bye
[11:00] <NeXtDaY> wols: it was ATI and I changed that to Vesa to fix a login problem
[11:00] <SpeakerMania> Pconfigi, thanks! 'm reading a different thread on the same forum, so thanks.
[11:00] <pha|con> Dunas: unplug the cat5
[11:00] <tangopirat> wols: thx, then i will continue playing with it
[11:00] <Dunas> pha|con: Will do.
[11:00] <Hibame> wols: but that was from physical access I cant seem to connect to the mysql from across the room where the ftp can
[11:00] <wols> NeXtDaY: vesa cannot do beryl/compiz at all. ati driver can. fglrx only with XGL and not libcomposite/AIGLX
[11:00] <dfgas> wols:  it wont work with any of my networks
[11:00] <KR-data> Doctor, but my question was about playing dvds not detecting fan speeds and such :p
[11:00] <south01> sh3rlff i have xp on my other partition
[11:00] <south01> its already installed..
[11:00] <Doctor> oh
[11:00] <Doctor> decss right
[11:00] <wols> Hibame: mysql doesn't listen on port3306 by default. edit my.cnf to make it listen there
[11:01] <pha|con> dfgas: try adding an extra character to the end of the essid's you're trying to connect to and make sure it's in roaming mode
[11:01] <Sh3r1ff> south01: so you just want a dual boot?
[11:01] <wols> !dvd | KR-data
[11:01] <ubotu> KR-data: For playing DVD, see http://help.ubuntu.com/ubuntu/desktopguide/C/video.html - "libdvdcss2" can be found at http://wiki.ubuntu.com/SeveasPackages - Try k9copy (available in !Universe) for backing up DVDs
[11:01] <NeXtDaY> wols: I couldnt install fglrx.. also using ati won't allow me to log in
[11:01] <NeXtDaY> NeXtDaY XP?
[11:01] <wols> NeXtDaY: what videocard?
[11:01] <south01> i just want to see xp in a window like remote desktop
[11:01] <NeXtDaY> wols: XP?
[11:01] <KR-data> wols, thanks
[11:01] <dfgas> pha|con: for example 35694022? instead of 3569402
[11:01] <NeXtDaY> wols: I am using Vesa!!
[11:02] <wols> NeXtDaY: and I asked what viedocard exactly?
[11:02] <pha|con> dfgas: yeah, just one extra character, i think it's irrelevant which character it is
[11:02] <wols> NeXtDaY: and with vesa you can never use compiz/beryl
[11:02] <Timko> Sorry, anybody can help me with wirelles adsl connect. in ubuntu 7.04 ?
[11:02] <theunixgeek> Is sudo apt-get remove the opposite of sudo apt-get install?
[11:02] <GizDrak> odd in gparted I can not create a partition on my 1 TB logical drive but in qtparted I can but I can not format it to ext3 in qtparted but I can format it in gparted after qtparted creates the partition...
[11:02] <Hibame> wols: i looked at the my.cnf file and it has port 3306 set already
[11:02] <NeXtDaY> wols: ATI Technologies Inc Radeon IGP 330M/340M/350M <-- that what you mean?
[11:02] <BloodyTux> ello
[11:02] <south01> sh3rlff i just want to see xp in a window like remote desktop
[11:02] <wols> Hibame: netstat -anp |grep 3306
[11:03] <wols> south01: rdesktop
[11:03] <NeXtDaY> wols: Section "Device"
[11:03] <NeXtDaY>         Identifier  "ATI Technologies Inc Radeon IGP 330M/340M/350M"
[11:03] <NeXtDaY>         Driver      "vesa"
[11:03] <newtubuntu> When trying to launch my VMX, I get the following error msg from VMWare:  Could not open /dev/vmmon : no such file or directory. Please make sure that the kernel module 'vmmon' is loaded.  ?
[11:03] <wols> NeXtDaY: yes. ati driver only. and it really should work
[11:03] <theunixgeek> Is sudo apt-get remove the opposite of sudo apt-get install?
[11:03] <kruuli> i really need some help .. been struggling with this for weeks! i have a unichrome card CLE266 and i cant play movies the error i get is "X11 ERROR: BADALLOC" or it complains about my video_out device not being valid please help!
[11:03] <ihateusernames> one quick question, does this hdd setup seem okay, 12GB windows, 42GB Linux, 1GB swap?
[11:03] <wols> theunixgeek: yes
[11:03] <theunixgeek> wols: thanks
[11:03] <dragonfyre13> Wow, the IRC room is busy right now. So here's my question, ever since the fiesty upgrade, all I have been burning is Coasters. No DVDs will burn at all. I've used multiple programs to burn (which all come back to CDRTAO and CDRDAO anyway.) When I burn it in any program, and have it verify what it writes, it says that the data was not verified, and there was an error.
[11:03] <Sh3r1ff> south01: not possible, you can only boot one, your solution would be to use virtualisation
[11:04] <NeXtDaY> wols:what the solution.. I am confused!!
[11:04] <dragonfyre13> ihateusernames: try 0GB windows. Much better. In all seriousness, it does look fine.
[11:04] <wols> ihateusernames: rather big for linux. rest is ok. linux only needs around 10MB. you can make the rest a data partition like fat32 to share betwene windows and linux
[11:04] <south01> what does it do?
[11:04] <NeXtDaY> +is
[11:04] <wols> NeXtDaY: either you use ati for the driver (that is not fglrx) or no solution to run compiz
[11:04] <jrib> wols: 10mb? :)
[11:04] <Hibame> wols: the default info showed up not sure what I am looking for
[11:04] <newtubuntu> When trying to launch my VMX, I get the following error msg from VMWare:  Could not open /dev/vmmon : no such file or directory. Please make sure that the kernel module 'vmmon' is loaded.  ?
[11:04] <pha|con> Dunas:  you still there?
[11:04] <Dunas> pha|con: It's now saying it's at 30% from within the same room- again, I'm less than a foot from the router.
[11:04] <ihateusernames> lol 0 for windows, i would, trust me, but i need photoshop and a program to transfer music to my mp3 player that wont work in Linux
[11:04] <Jimmey> newtubuntu, try "sudo modprobe vmmon"
[11:05] <Sh3r1ff> south01: creates a layere of virtualisation so you can boot different os at the same time
[11:05] <Timko> Hey, anybody ! Wirelles in UBUNTU? How i can activate that ?
[11:05] <NeXtDaY> wols: ok thanks. !!
[11:05] <pha|con> Dunas: does it connect, though?
[11:05] <wols> south01: where is this windows running? differnt pc or same pc?
[11:05] <CeruM> any suggestions for when the installer freezes?
[11:05] <wols> CeruM: apci=off for a boot parameter
[11:05] <Dunas> pha|con: It was registering at 30% from less than a foot away, and it doesn't seem to have actually connected.
[11:05] <Sh3r1ff> wols: same pc dual boot ;)
[11:05] <Nott32> back again :p
[11:05] <nibsa1242b> Does anyone know where I could find a good list of mini-pci cards that work with Ubuntu? I'm sick and tired of my BCM4318 (rev 02).
[11:05] <dfgas> pha|con: it just shows 30% connection like without the extra
[11:05] <CeruM> wols could you repeat that in english?
[11:06] <Sh3r1ff> !hardware | nibsa1242b
[11:06] <ubotu> nibsa1242b: For lists of supported hardware on Ubuntu see https://wiki.ubuntu.com/HardwareSupport
[11:06] <pha|con> Dunas:  i have to head home now.  subway takes around an hour...if anyone else can't help you i'll be back in around an hour and a half
[11:06] <Nott32> I can not connect to a secure wirless network
[11:06] <newtubuntu> when doing:   sudo modprobe vmmon ;  I get:  FATAL: Module vmmon not found.
[11:06] <wols> CeruM: when you boot the cd, give the linux kernel "acpi=off" as a parameter
[11:06] <Nott32> its not sending the key right or sumthing
[11:06] <CeruM> uh ok o_O
[11:06] <CeruM> ill see what i can do
[11:06] <Dunas> pha|con: Alright.
[11:07] <GizDrak> nibsa1242b: yeah it sucks having a bcm43xx we toke 10 laptops a part last week all different brands all had bcm43xx cards in them
[11:07] <Nott32> but shows as conencted with an ip address of 0.0.0.0
[11:07] <wols> NeXtDaY: find /lib -namr vmmon*
[11:07] <newtubuntu> How do I install vmmon ?  Is this a package ? I can't find it in Synaptic
[11:07] <nibsa1242b> Shriff, thanks... mainly I'm trying to figure out where to buy one. I see people mention all the time ones are available, but I don't know where to purchase.
[11:07] <Jimmey> GizDrak, my bcm43xx works fine
[11:07] <Timko> People ! Wirelles activation ?
[11:07] <BloodyTux> dunas, whats the problem?
[11:07] <kravlin> hey. I'm working on creating a dual boot computer and I need help getting grub set up. Currently my computer just boots into windows.
[11:07] <BloodyTux> timko: what ubuntu ver.
[11:07] <NeXtDaY> wols: ok
[11:07] <nibsa1242b> GizDrak- I actually had it working like 3 months ago, but my hard drive had to be replace and I can't seem to get it working again.
[11:07] <GizDrak> Jimmey: mine too most of the time it just a pain
[11:07] <dfgas> pha|con: thats what got it to work for you?
[11:07] <Jimmey> GizDrak, ahh, yeah
[11:08] <NeXtDaY> wols : namr? or name?
[11:08] <Dunas> bloodytux: Problems with a RealTek wireless card and a Linksys router.
[11:08] <dfgas> pha|con: just connect to other wireless network? then put 35694022
[11:08] <BloodyTux> Dunas: hmmmmmmmm
[11:08] <newtubuntu> when doing:   sudo modprobe vmmon ;  I get:  FATAL: Module vmmon not found.     How do I install vmmon ?  Is this a package ? I can't find it in Synaptic
[11:08] <wols> NeXtDaY: sorry. wrong nick
[11:08] <NeXtDaY> wols ok!
[11:08] <wols> was for newtubuntu: find /lib -name vmmon*
[11:08] <GizDrak> nibsa1242b: it toke me a couple of time to get mine working try a couple of different ways it will work at some point
[11:08] <nibsa1242b> GizDrak Jimmey my understanding is that most bcm43xx will work, but that the 4318 (rev 02) is especially touchy/ cursed
[11:08] <BloodyTux> dunas: so you cant connect or what?
[11:08] <Sh3r1ff> newtubuntu: how did you install vmware?
[11:08] <Nott32> I have a belkin G USB wirless that will not connect to my negear router that is secured with WEP
[11:09] <Timko> Ubuntu 7.04
[11:09] <GizDrak> nibsa1242b: yeah the 4318 is the worsed I believe
[11:09] <dfgas> pha|con: lmao it works
[11:09] <dfgas> just shows a 30%connection
[11:09] <Dunas> bloodytux: I'm at the point where it can see the router, but it registers at 30% strength from less than a foot away, and it doesn't seem to actually be able to send or receive data.
[11:09] <wols> Nott32: wep is useless anyways. might just as well disable that
[11:09] <newtubuntu> Sh3r1ff:  From Synaptics
[11:09] <south01> my windows run at the same pc
[11:09] <BloodyTux> timko: left click network monitor in top gnome bar. its two pcs
[11:09] <Sh3r1ff> newtubuntu: player or server?
[11:09] <kravlin> I need help setting GRUB back up. Anyone know how to do so while leaving windows working so i can dual boot?
[11:09] <Nott32> I would if I could lol
[11:09] <wols> south01: you will need vmware workstation
[11:09] <wols> south01: and even there it's experimental
[11:10] <nibsa1242b> GizDrak- I've spent a day already trying. I can get it to work fine with no security, but it won't work with WPA. I'm in a business environment and need WPA. I'd rather pay $20-50 then have to play with it anymore... my time is worth more then that.
[11:10] <newtubuntu> when typing:  find /lib -name vmmon*   I find:  /lib/modules/2.6.20-16-generic/vmware-player/vmmon.ko   and   /lib/modules/2.6.20-16-lowlatency/vmware-player/vmmon.ko
[11:10] <wols> !grub | kravlin
[11:10] <ubotu> kravlin: grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto
[11:10] <south01> hmmm..
[11:10] <wols> Nott32: sudo depmod -a, then modprobe again
[11:10] <south01> so i think i need reboot everytime..
[11:10] <newtubuntu> Sh3r1ff:  Player.  I want to launch a WinXP VMX I created on EasyVMX
[11:10] <wols> newtubuntu: sudo depmod -a, then modprobe again
[11:10] <newtubuntu> makes sense ?
[11:10] <BloodyTux> dunas: you might want to contact linksys or realtek. linksys might not detect the card because realtek isnt that popular
[11:10] <Nott32> Its the realtek chipset that will not work I belive (just some googling a while ago)
[11:11] <wols> newtubuntu: if that doesn't work, sudo insmod <patch to vmmon>
[11:11] <Nott32> im going to try another wirlss adapter from d-link
[11:11] <wols> BloodyTux: no
[11:11] <GizDrak> nibsa1242b: check www.newegg.com they have some mini-pci wireless cards
[11:11] <kravlin> nibsa1242b : We had this same problem when i was on last night. I know there's a guide on the website on how to do it.
[11:11] <wols> Dunas: is any encryption taking place
[11:11] <Dunas> bloodytux: The problem is that under Windows XP the router was able to connect the card from outside my house.
[11:11] <BloodyTux> hmmmmmmm
[11:11] <BloodyTux> weird
[11:11] <Dunas> wols: Not that I know of. The connection is unsecured.
[11:11] <kravlin> nibsa1242b: I would also check out a program called wicd. You can find it on sourceforge and it may be what you're looking for.
[11:11] <GizDrak> nibsa1242b: I have only ever worked with bcm43xx cards so I can not say which may be better
[11:12] <newtubuntu> When doing: sudo modprobe vmmon I get:   FATAL: Module vmmon not found.
[11:12] <dfgas> pha|con: thank you  :D
[11:12] <nibsa1242b> kravlin there are lots of guides, none of them seem to help... unless everything is fine and ndiswrapper is the problem... I just don't care anymore I want to pay some money and be done with it.
[11:12] <BloodyTux> your network might be the same name is another network that is a couple houses down or sumtin. im just guessing
[11:12] <newtubuntu> wols, I NEW to Ubuntu, and Linux. Should I quit if 'sudo insmod <patch to vmmon>'  means almost nothing to me ?
[11:13] <wols> newtubuntu: no. you should read mode docs
[11:13] <jrib> newtubuntu: how did you install vmware?
[11:13] <kravlin> nibsa1242b : Wicd worked for my friend. i would check that out before spending anything.
[11:13] <BloodyTux> newtubuntu: NO!!!!!! what are you trying to do?
[11:13] <nibsa1242b> GizDrak I'm surprised you are sane having to work with so many
[11:13] <Hibame> man I am stumped, I cant for the life of me connect to my mysql server
[11:13] <wols> insmod is a program like modprobe and takes a exact path, like the ones you pasted