[12:37] <lkjlkj> toshiba A105
[12:37] <scorpking> lkjlkj: there will be a key that you have to press together with the second function key. it's usually on top.
[12:37] <Thothra> lkjlkj: Open up your System Settings
[12:37] <purpleposeidon> kompare is magical!
[12:37] <Thothra> Then navigate to Monitor and Display
[12:37] <semistud2354> does anyone know the command to find out your ip, subnet mask, and gateway
[12:38] <drif> lkjlkj: on some models there is Fn key or similar - that one combined with arrow up/down or left/right might adjust brightness
[12:38] <Thothra> Second tab lets you adjust the gamma
[12:38] <semistud2354> the konsole command
[12:38] <Thothra> ifconfig -a
[12:38] <lkjlkj> fn key doesn't work
[12:38] <drif> lkjlkj: but it exists?
[12:38] <lkjlkj> drif:yes
[12:38] <Thothra> Do what I said lkjlkj
[12:38] <lkjlkj> Thothra: it's open
[12:39] <Thothra> In Monitor & Display
[12:40] <Thothra> second tab
[12:40] <semistud2354> does anyone know the command to find out your ip, subnet mask, and gateway
[12:40] <semistud2354> ??
[12:40] <lkjlkj> Thothra: ok I'm seeing if it works
[12:41] <scorpking> semistud2354: ifconfig -a
[12:41] <Thothra> yeah semistud
[12:41] <gemidjy> anyone has idea/advice on what app. to you use to upload multiple files on picasaweb without using its web interface ?
[12:41] <semistud2354> o
[12:41] <gemidjy> f-spot is out of question
[12:41] <semistud2354> cuz im at usf right now...trying to get my xbox connected to live
[12:41] <semistud2354> but ist messin
[12:41] <semistud2354> up
[12:42] <semistud2354> i was thinkin about using my ip on my laptop...
[12:42] <Daisuke_Laptop> how bout picasa?
[12:42] <scorpking> semistud2354: ur confusing me. lol
[12:43] <gemidjy> Daisuke_Laptop: I avoid use proprietary software
[12:43] <gemidjy> using*
[12:43] <semistud2354> i can connect to the net using my laptop
[12:43] <semistud2354> but my xbox doesnt work
[12:43] <Thothra> semistud: I blame Microsoft..
[12:43] <gemidjy> semistud2354: get rid of Xbox
[12:44] <drif> gemidjy: nice tips..
[12:44] <Daisuke_Laptop> then don't complain when you can't upload through a proprietary protocol, and try not to push the FOSS-only mindset on others, there's nothing wrong with an xbox.
[12:44] <scorpking> semistud2354: mmm... good luck. haha
[12:44] <semistud2354> i did that command
[12:44] <semistud2354> and alot of info poped up
[12:44] <Daisuke_Laptop> linux is about choice, he chooses to use that, you choose not to, everyone gets along
[12:44] <gemidjy> drif: it was a tip, not tips, that simple
[12:45] <drif> gemidjy: well atleast it wasn't a bit creative
[12:45] <gemidjy> Daisuke_Laptop: go poo somewhere else please
[12:45] <semistud2354> is there a way to find out what my wireless card is connected to
[12:45] <semistud2354> like
[12:45] <gemidjy> drif: true, I could have been more poetic
[12:45] <semistud2354> just the ip of my wireless card
[12:45] <drif> gemidjy: least you could have done
[12:46] <gemidjy> not much into poetry
[12:46] <semistud2354> is there like a wireless info command
[12:46] <gemidjy> Daisuke_Laptop: HTTP is proprietary protocol?
[12:46] <semistud2354> like ls wifi
[12:46] <semistud2354> or something
[12:46] <Daisuke_Laptop> oi
[12:46] <Thothra> iwconfig
[12:46] <gemidjy> semistud2354: iwconfig
[12:46] <Daisuke_Laptop> yes, i worded that wrong
[12:47] <Daisuke_Laptop> it's picasa web
[12:47] <Thothra> but your wireless is listed in ifconfig anyways
[12:47] <gemidjy> Daisuke_Laptop: u have no clue u idiot
[12:47] <Daisuke_Laptop> you could use picasa *GASP* to upload to picasaweb, but you choose not to.  don't complain.
[12:47] <Daisuke_Laptop> gemidjy: enough trolling.
[12:47] <gemidjy> tzk tzk, this channel gets full of scum
[12:48] <semistud2354> i went to "whats my ip.com" and it gave me a different ip address then the one that linux is saying i have
[12:48] <drif> I'm sure this is not right place to ask :D but my friend is planning on installing kubuntu dualboot with vista. expecting adversities?
[12:48] <Daisuke_Laptop> call me an idiot then say the channel's full of scum.  that's funny
[12:48] <Thothra> semistud, you must be behind a router
[12:48] <Thothra> or other layer 3 network device
[12:48] <scorpking> semistud2354: route -n
[12:49] <semistud2354> yea im behind a router
[12:49] <semistud2354> but i turned off dchp...so usf cant see it lol
[12:50] <drif> Daisuke_Laptop: atleast it followed some logic, eh :D
[12:50] <Thothra> hmm, how are you online if you turned off DHCP?
[12:50] <scorpking> semistud2354: then the router will have the ip u got from the website.
[12:50] <drif> Thothra: manually setting the ip/etc..
[12:50] <Thothra> gotcha
[12:51] <semistud2354> so that whats my ip thing is my routers ip
[12:51] <edemilson> ola alguem poderia me ajudar com uma lexmark x4270
[12:51] <semistud2354> so what i do is type route -n
[12:51] <ubuntu_> ubotu:  the partation that ubuntu was inatalled after windows instalation its type now is W95 Ext'd (LBA) and linux can't see it
[12:51] <semistud2354> and pick the destination with the genmask 255.255.255.0
[12:51] <ubuntu_>  ubotu  the partation that ubuntu was inatalled after windows instalation its type now is W95 Ext'd (LBA) and linux can't see it
[12:52] <semistud2354> right??
[12:52] <scorpking> semistud2354: to see where the traffic gos to but that won't help much in your case i think.
[12:52] <semistud2354> it freakin worked last year
[12:52] <semistud2354> i dont know what the heck happend
[12:52] <semistud2354> i simply put my laptops ip in
[12:52] <semistud2354> and it connected
[12:53] <Thothra> microsoft servers might be messed up, MSDN was under construction yesterday afternoon
[12:53] <semistud2354> o
[12:53] <semistud2354> so noone could connect
[12:53] <Thothra> can you ping the xbox servers?
[12:53] <lkjlkj> Thothra: thanks! that's better. Is there any way to reduce the brightness even more?
[12:53] <semistud2354> cuz ive been trying to connect for the past like
[12:53] <semistud2354> 3 days
[12:53] <Thothra> hmm, yeah, use a darker color scheme
[12:54] <scorpking> semistud2354: it sounds like u need to be on ur xbox solving the problem, not linux.
[12:54] <semistud2354> im on both
[12:54] <semistud2354> i need to get an ip
[12:54] <ubuntu__> hayami: tried #gametome?
[12:54] <semistud2354> that works on my xbox
[12:55] <hayami> ok
[12:55] <hayami> thanks
[12:55] <semistud2354> i dunno
[12:55] <semistud2354> thanx for your help anyway
[12:55] <scorpking> semistud2354: run ipconfig /all on xbox
[12:55] <hayami> i guess is not help xD i'm the only one there lol
[12:56] <Feudster> what app should i use to play back audio cds? all i get is choppy playback
[12:57] <Angelus> BluesKaj: i blowed my system again lol
[12:57] <scorpking> Feudster: tried xmms?
[12:57] <Feudster> yes i have xmms playing shoutcast np, but it wont play audio cds
[12:58] <lkjlkj_> well it's really the whites I mean, not the bars that are any issue. :)
[12:58] <scorpking> Feudster: it's supposed to. don't know why it doesn't.
[12:59] <Feudster> i drop the file into playlist and nothing appears
[12:59] <scorpking> Feudster: try to rip the disks to your computer and play it from there.
[12:59] <Feudster> it wont rip either
[01:00] <scorpking> disk damaged?
[01:00] <Feudster> nope plays on cd player
[01:00] <Feudster> oh well
[01:00] <valerio> hi
[01:00] <scorpking> might be ur rom.
[01:00] <Feudster> well it works in windoze
[01:00] <scorpking> lol. beats me then.
[01:01] <Feudster> thx anyway
[01:01] <scorpking> np
[01:01] <miketalanca> I have quite a large problem. I was moving some things between two hard drives and Konqueror stopped responding (I use Kubuntu). So, I went for the GUI restart, but after the screen went black, nothing happened. So I restarted the machine, and now i get no login.
[01:02] <Daisuke_Laptop> can you hit ctrl+alt+f1 to get to a tty?
[01:02] <miketalanca> Yeah.
[01:02] <drif> Daisuke_Laptop: I already told him that - atleast he told me he got there
[01:03] <kcg> hi there, can anyone tell me how to remove apache2 completely on feisty?
[01:03] <miketalanca> I tried restarting kdm, but nothing happened; it just took me back to the same black screen.
[01:03] <SinisterDragon> Does anyone know how to get the psp to work under kubuntu?
[01:03] <SinisterDragon> I can deleate or write any files to it
[01:03] <SinisterDragon> cant*
[01:03] <scorpking> miketalanca: hd is one partition?
[01:04] <drif> kcg: sudo apt-get --purge remove apache2
[01:04] <drif> kcg: or using adept manager
[01:04] <miketalanca> scorpking: yeah
[01:04] <uakkeri> how to install ati radeon 9600 fglrx drivers... can someone guide me?
[01:05] <SinisterDragon> When I go to copy a file to the psp it just shows right away. Not writing to the psp but it shows under /media/psp/ untill I unmount it
[01:05] <kcg> drif, I will have a go with the command first.... btw, im trying to reinstall egroupware
[01:06] <scorpking> miketalanca: not mounted as read only?
[01:06] <kcg> drif, damn, now i got this error when i try to purge apache2.
[01:06] <kcg> E: Sub-process /usr/bin/dpkg returned an error code (1)
[01:06] <drif> !pastebin | kcg
[01:06] <ubotu> kcg: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (be sure to give the URL of your paste - see also the #kubuntu channel topic)
[01:06] <drif> kcg: could you copy/paste more of it - if there were something else
[01:07] <kcg> thx drif, i will do it now
[01:08] <miketalanca> scorpking: Nope
[01:08] <kcg> drif, http://paste.ubuntu-nl.org/35479/
[01:08] <kcg> actually a big chunk of error
[01:08] <scorpking> miketalanca: if u remount it does the files u copied show up?
[01:09] <kcg> drif, what i am trying to do is to remove and reinstall the whole egroupware completely, including the apache2 config
[01:10] <scorpking> miketalanca: run dmesg | tail to see if there is any messages.
[01:10] <miketalanca> scorpking: Yes the files are all there; I will run that right now
[01:11] <rignes> sparrw?
[01:12] <miketalanca> scorpking: Yeah, there are a few things that come up.
[01:12] <miketalanca> scorpking: some things about bluetooth...and a few errors referencing my slave drive (hdd)
[01:12] <kcg> drif, just did a sudo apt-get autoremove and purge remove apache2
[01:13] <scorpking> miketalanca: what's the errors about ur slave hd? also check /var/log/Xorg.0.log for the reason gui doesn't start.
[01:14] <miketalanca> scorpking: it says "I/O error, dev hdd, sector (numbers); and "buffer I/O error on device hdd1, logical block (numbers
[01:15] <scorpking> miketalanca: ur hd is stuffed. unplug it and get dd_rescue to copy it to a new hd of the same size.
[01:16] <scorpking> miketalanca: sometimes u only have one chance to recover so keep it off until ur ready to copy ur info off it.
[01:17] <miketalanca> scorpking: alright, thanks. I am guessing that the gui-based error will be near the bottom of this document?
[01:17] <scorpking> miketalanca: yes
[01:18] <miketalanca> scorpking: theres "Backtrace" with nothing under it  and before that all it says is "initializing extension [whatever] "
[01:19] <scorpking> miketalanca: ya i can't access pastebin so i can't take a look at the log file. the word error come up anywhere?
[01:21] <scorpking> miketalanca: also if any of the files on / gets mounted from hdd1 the hd will be the problem.
[01:22] <BluesKaj> look in: system settings/network settings
[01:22] <ubuntu__> !ati | uakkeri
[01:22] <ubotu> uakkeri: To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto
[01:22] <BluesKaj> oops, someting I forgot to enter 20 mins ago
[01:22] <miketalanca> scorpking: so you're saying that if I had anything relating to login on my slave drive, that would cause this?
[01:23] <miketalanca> scorpking: I didn't find anything marked as an error in the log
[01:24] <scorpking> miketalanca: ya. is ur root partition mounted on hdd?
[01:25] <miketalanca> scorpking: nope, the only thing related to the system I might have on that hard drive is a wallpaper or my kdm splash
[01:26] <Daisuke_Laptop> i want to know why dell disabled hardware virtualization on the 1420n
[01:26] <scorpking> miketalanca: so ur system will run if the hd is removed. unmount it and go back to tty7 and restart x with ctrl+alt+backspace
[01:26] <Daisuke_Laptop> there's probably at least a decent reason, but meh.
[01:27] <BioVorE> its because it casues problems with some stuff..
[01:28] <Daisuke_Laptop> i haven't even found a way to enable it in the bios (as it claims it's disabled by bios, i kinda hoped it would be that simple)
[01:28] <BluesKaj> uakkeri, use adept to install xorg-driver-fglrx
[01:29] <scorpking> miketalanca: check /var/log/kdm.log . maybe there is something in there.
[01:31] <miketalanca> scorpking: I don't see anything in the kdm log, but I will try restarting X with the hard drive unmounted
[01:32] <evri2> guys the disk i mounted is shown as a directory.It is not shown as hardisk
[01:32] <scorpking> thats normal
[01:33] <evri2> scorpking: mine is normal?
[01:33] <scorpking> miketalanca: no
[01:33] <genii> evri2: On linux there aren't drive letters.
[01:33] <scorpking> miketalanca: what graphics card do u have?
[01:34] <scorpking> evri2: no. everything is in directories.
[01:35] <uakkeri> BluesKaj:i might try the binary driver this time
[01:35] <miketalanca> scorpking: nvidia geforce 7600GT
[01:35] <evri2> genii: i think you couldn't understand my problem.I have 2 ntfs drives and one of them(sda1) mounted and shown as a drive in /media/sda1  however other ntfs drive is not shown as a drive.It is shown as directory in /media
[01:36] <scorpking> miketalanca: sometimes the drivers get messed up and it will give you a blank screen on tty7 but it will show up in the logs.
[01:37] <uakkeri> BluesKaj: i got dr it working with that packet but then tv card stopped working
[01:37] <scorpking> miketalanca: do you have the binary drivers for ur card?
[01:37] <miketalanca> scorpking: so should I change the drivers back to "nv" in x?
[01:37] <evri2>    /dev/disk/by-uuid/F044B5EA44B5B3A6 /media/sda1 fuseblk         <--this is my sda1 ntfs drive
[01:37] <miketalanca> I used envy to install my drivers
[01:37] <genii> evri2: So then it appears it was mounted to /media then and not to some more sane place like /meadia/descriptivenamehere
[01:37] <evri2>  /dev/disk/by-uuid/bd90cf64-3ed3-473f-b588-2e3b6823aa77 /media/sda5 fuseblk   <--and this is sda5
[01:37] <rignes> Does anyone know of a way to mount mdf cd-images w/o converting them to an iso?  The 'sudo mount -o loop /mdffile.mdf /media/cdrom' tells me I have to provide a file system but iso9660 doesn't work when provided.
[01:37] <evri2> why do second one have more stuff
[01:38] <evri2> i tried to mkswap second one
[01:38] <evri2> that hurt sb there
[01:38] <evri2> ?
[01:38] <scorpking> miketalanca: not sure if that will help. try going to runlevel 1 and reinstall the drivers. after that go back to runlevel 5 without rebooting.
[01:38] <scorpking> miketalanca: before u go.
[01:39] <miketalanca> scorpking: ok
[01:39] <scorpking> miketalanca: u might get the same problem every time u restart the computer. i'm not sure how to fix it but to reinstall while passing runlevel 1.
[01:43] <miketalanca> scorpking: I'll give that a try, thanks
[01:43] <scorpking> miketalanca: good luck.
[01:45] <scorpking> is there any way to hide these stupid 'has left the server', 'has joined this channel' crap in konversation?
[01:49] <drewcipher> scorpking:  yes
[01:49] <drif> scorpking: Chat window -> Hide join/part/nick
[01:50] <scorpking> thanx!
[01:50] <drif> np, took a sec to check it out ;) I use irssi myself
[01:51] <scorpking> drif: i'm using Konversation. no Chat window. :(
[01:51] <drif> scorpking: hm?
[01:52] <drif> scorpking: but you found the needed setting though=
[01:52] <drif> ?
[01:52] <scorpking> drif: i know some other clients have the option. can't find this one.
[01:52] <drif> scorpking: if not - it's under konversation settings ->
[01:53] <scorpking> drif: busy looking...
[01:53] <drif> scorpking: yes, I looked it from konversation myself - my irssi is purely text based
[01:54] <drif> scorpking: Configure->Configure Konversation->Chat window->Hide join/part/nick..
[01:55] <scorpking> drif: one sec.
[01:55] <miketalanca> scorpking: I believe I may have found the problem, and it's something I initiated not knowing it would do this much harm.
[01:56] <scorpking> drif: haha... not there but i'll sort it out. thanx anyway. :)
[01:56] <miketalanca> scorpking: I repeatedly tried to install alien arena, an FPS, but kept getting an error about having an old version of libc6, so I installed a package that contained a newer version.
[01:57] <miketalanca> scorpking: I think that broke a huge number of packages in the process
[01:57] <scorpking> miketalanca: does it look fixable? :/
[01:58] <drif> scorpking: what's not there?
[01:58] <BioVorE> miketalanca: to get the old glibc just install the gcc-3.4 compiler
[01:58] <BioVorE> or libstdc++5.6 or something like that
[01:58] <drif> scorpking: yes, it's definitely there
[01:59] <miketalanca> scorpking: I wrote down a list of the packages it removed (there was a bunch) in fixing the dependencies for the new libc6, and some things uninstalled that looked like they should stay, such as ubuntu-minimal and build-essential :/
[01:59] <drif> scorpking: ok I made one error it seems not Configure but Settings->and the rest is same
[01:59] <scorpking> miketalanca: outch!
[02:00] <miketalanca> scorpking: but if I remove libc6, there goes the rest of my system, correct?
[02:00] <scorpking> miketalanca: sorry but i'm not sure how u gonna fix that. try sudo apt-get upgrade.
[02:00] <miketalanca> scorpking: would it be safe to uninstall it and then reinstall it from the repo's (whatever version is there)?
[02:00] <drif> scorpking: Settings->Configure Konversation->Chat window->Hide join/part/nick.. (not it should be correct)
[02:01] <drif> not=now
[02:01] <miketalanca> scorpking: one package not upgraded, and it's related to compiz fusion
[02:01] <scorpking> miketalanca: u need libc6 for a lot of things.
[02:02] <drif> scorpking: Settings->Configure Konversation->Behavior->Chat window->Hide join/part/nick.. :D last try
[02:02] <genii> underdog5004: You here?
[02:02] <miketalanca> scorpking: yeah, I know, but would I be able to issue one command, say telling it to uninstall then immediately reinstall without doing any harm, or would that be impossible?
[02:02] <scorpking> drif: one sec.
[02:03] <x_link> What's the name of the package manager in Kubuntu?
[02:03] <Dragnslcr> Adept
[02:03] <drif> x_link: Adept Manager
[02:03] <x_link> Ahh right. Thanks alot!
[02:03] <x_link> I appreicate it.
[02:03] <scorpking> miketalanca: i'm not sure. what's the worst that can happen right? lol. man aptitude or man dpkg. might help more than me. :/
[02:04] <scorpking> drif: fixed! thanx a mil. :-D
[02:04] <miketalanca> scorpking: I think formatting would be an easier solution than trying to work this out...
[02:04] <drif> scorpking: you're welcome
[02:05] <miketalanca> scorpking: thanks a ton for your time though
[02:05] <scorpking> miketalanca: its quicker but that won't teach u much. haha... ur welcome.
[02:06] <drif> scorpking: you took words out of my mouth :D
[02:06] <scorpking> lol
[02:06] <drif> I was about to tell that same thing to mike :D
[02:06] <miketalanca> scorpking: well I think whatever gave me internet access was removed too
[02:07] <scorpking> miketalanca: if u wanna fix it soon, reinstall. haha
[02:08] <miketalanca> scorpking: yeahhhh I am working on that. Thanks again :D
[02:08] <scorpking> np
[02:08] <scorpking> bedtime for me. c ya ppl. have fun!
[02:29] <Torch_> i've edited  xorg.conf but i can not figure out how to save. can someone help
[02:30] <Dragnslcr> What did you edit it with?
[02:31] <Torch_> i changed nv to nvidia
[02:31] <uakkeri> now i have fglrx installed... now kdetv
[02:32] <Torch_> i get a black screen on start up, then ctrl+alt+f1
[02:34] <BluesKaj> Torch_, ctrl + X , then at the bottom it'l ask you to save it
[02:34] <BluesKaj> type Y or yes , not quite sure , but it should indicate
[02:36] <Torch_> thanks, going to test it out
[02:38] <uakkeri> how come kdetv is not working with fglrx?
[02:42] <uakkeri> tvtime works. so i'm pleased :)
[02:43] <BluesKaj> yeah tvtime is cool
[02:43] <ubuntu__> !info bibletime
[02:43] <ubotu> bibletime: A bible study tool for KDE. In component universe, is optional. Version 1.6.2.dfsg-1ubuntu2 (feisty), package size 1080 kB, installed size 2640 kB
[02:43] <followerofhim> Greetings to one and all.
[02:44] <dangaio> hello, I am trying to install java onto my laptop and everytime I try, I get an error message from adept manager telling me it failed or the commit will break packages. how can I correct this?
[02:44] <Torch_> ctrl+x
[02:44] <Torch_> didnt work for me
[02:44] <BluesKaj> I use it with a sat feed ...got an old sat receiver here in the den that occasionally use to watch tv on my pc
[02:44] <dangaio> I have been trying and looking on the forum for the past 2 days.
[02:45] <followerofhim> I ve got bibletime, but is gone up in arab.
[02:45] <followerofhim> come
[02:45] <ubuntu__> ~Torah?
[02:47] <dangaio> Help with installing Java... adept manager fails
[02:47] <ubuntu__> dangaio: try it from the command line
[02:48] <evri2> i need help.When i try to mount my drive it says it look like swapspace but it is not.I made a mistake before.I tried to mount that drive using mkswap and now kubuntu think it is swap.How can i revert this?
[02:48] <BluesKaj> dangaio, go to adept and uninstall all instances of java installed on yer system then install java-common and j2re1.4
[02:51] <jawee_> I thuoght I'd throw this out, though I didn't write it, if any body is interested in helping:
[02:51] <jawee_> http://pinaraf.blogspot.com/2007/08/test-documents-needed.html
[02:51] <Torch_> so i installed my nvidia driver and when i reboot i get a black screen, so then i press ctrl+alt+F1 to edit xorg.conf, but i dont know how to save it
[02:52] <BluesKaj> did you try startx
[02:52] <followerofhim> I am running Kubuntu but I can't get skype running on it.  I downloaded it for ubuntu skype-debian_1.4.0.99-1_i386.deb how do I get it to work?
[02:53] <JCDG> have you already installed it?
[02:53] <Torch_> BluesKaj how do i do that
[02:53] <followerofhim> how?
[02:53] <JCDG> what?? the installation??
[02:54] <jawee_> yeah
[02:54] <jawee_> you open it was gdebi
[02:54] <Torch_> i pressed ESC then typed startx but it didnt work
[02:54] <BluesKaj> Torch_, once you edit it , you type ctrl+x, there should be an indicator near the bottom of the page asking to save it
[02:54] <jawee_> or kpackage in kubuntu
[02:54] <ubuntu__> !skype
[02:54] <ubotu> To install Skype on Ubuntu, see https://help.ubuntu.com/community/Skype - To record on Skype, check: https://wiki.ubuntu.com/SkypeRecordingHowto
[02:54] <JCDG> you can use the gdebi,
[02:55] <Torch_> i typed ctrl+x, but nothing came up asking me to save
[02:55] <JCDG> it's easier
[02:56] <BluesKaj> hmm, i was told that exiting auto saved it in the cli , but I'm not sure ...what edit did you do ?
[02:57] <BluesKaj> Torch_, ?
[02:57] <umarzuki> hi every1
[02:57] <Torch_> are you asking me where i edited it
[02:57] <BluesKaj> yes
[02:57] <Torch_> vi
[02:57] <BluesKaj> what did you change?
[02:57] <Torch_> nv to nvidia
[02:58] <evri2> i need help.When i try to mount my drive it says it look like swapspace but it is not.I made a mistake before.I tried to mount that drive using mkswap and now kubuntu think it is swap.How can i revert this?
[02:58] <BluesKaj> !repeat
[02:58] <ubotu> Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. You can search https://help.ubuntu.com or http://wiki.ubuntu.com while you wait. Also see !patience
[02:59] <ubuntu__> evri2: I think if you mounted it with mkswap then it is in fact now swap
[03:00] <evri2> yes but then i unmounted it and i mounted real swap.But now when i try to mount the drive which is not swap mount says that it is swap  ubuntu__
[03:00] <ubuntu__> evri2: Again if you told the computer to make it swap then it is now swap
[03:00] <ubuntu__> congrats you have two swap file
[03:01] <hydrogen> that means you can swap stuff between swap files and ram
[03:01] <hydrogen> to have more swapping
[03:01] <hydrogen> you graduate kindergarden
[03:01] <hydrogen> sharing is good
[03:01] <evri2> do you think this is funny?
[03:01] <evri2> ........
[03:01] <ubuntu__> No
[03:01] <ubuntu__> I know I'd be upset
[03:01] <ubuntu__>  how big is the partition?
[03:03] <wimpies> when I plug in my external harddisk through USB, it is detected but not automounted.  what might be wrong ?
[03:03] <evri2> ubuntu__: partition is 40gb.But i can still mount it by trying "mount -t fuseblk /dev/sda6 /media/blabla".But it won't be listed as a hardrive.It will be a normal directory.I want it to listed as a hardrive because i want to see it in kio-sysinfo
[03:04] <evri2> is there a way to make mount see that as ntfs again?
[03:04] <ubuntu__> -t ntfs ?
[03:04] <Zagalo> Update Your Opera
[03:04] <dangaio> krez, thank you. It worked.
[03:04] <Zagalo> http://hyip-man.blogspot.com/2007/08/opera-javascript-invalid-pointer.html
[03:04] <umarzuki> try install partitioning packagge
[03:04] <umarzuki> when you open it
[03:05] <umarzuki> it suddenly mounted the unmounted partition
[03:05] <umarzuki> happened to my sata2 drive
[03:07] <hydrogen> everythings funny
[03:07] <hydrogen> unless it happens to oneself
[03:07] <hydrogen> in which case it is serious
[03:12] <Zagalo> hi all
[03:12] <Zagalo> in xfce in app menu, i see random, what is it?
[03:20] <enzo__> Bit of an issue here. I am trying to write a small book, but the page numbering with OpenOffice Word Processor doesn't seem to display a page number after 7. Any idea why that is?
[03:22] <Zagalo> in xfce in app menu, i see random, what is it?
[03:22] <Zagalo> Update Your Opera
[03:22] <stdin> Zagalo: I don't know, this is #kubuntu, we mostly use KDE here
[03:22] <Zagalo> http://hyip-man.blogspot.com/2007/08/opera-javascript-invalid-pointer.html
[03:26] <jr_> good evening, folks
[03:26] <enzo__> What is the name of the app to run in Kubuntu that scans win files for viruses?
[03:26] <jr_> good question
[03:27] <stdin> enzo__: why do you need to?
[03:27] <jr_> he wants to scan win files
[03:27] <stdin> enzo__: let me see if i can remember it :p
[03:27] <jr_> personally...I don't have any windows files on this computer
[03:27] <enzo__> stdin: I have a few things that I've downloaded from the net and I don't want to give my friends infected files
[03:28] <stdin> enzo__: there seem to be a few, probably ClamAV is the one you are thinking of
[03:28] <stdin> https://help.ubuntu.com/community/Antivirus
[03:28] <enzo__> jr_: Go to download.com and you'll find something
[03:28] <jr_> find something for?
[03:29] <enzo__> stdin: GUI or command line?
[03:29] <stdin> enzo__: the main app is command line, but there are GUIs for it
[03:30] <enzo__> stdin: Thank you. On a side note, would you know why I cannot get past page "7" with OOo Word Processor? I mean in page numbering, not reading.
[03:31] <stdin> enzo__: no, I tested it when you said (by keeping enter pressed) and it went past page 7
[03:31] <enzo__> :(
[03:31] <enzo__> I can't get past 7
[03:32] <stdin> enzo__: I'm not running feisty tho, so it could be the version you have
[03:33] <enzo__> What are you running?
[03:34] <stdin> i'm on gutsy now
[03:35] <enzo__> 7.10, right?
[03:35] <stdin> yeah
[03:43] <xazo> need help with video. trying to set xorg.conf to allow higher resolution than 1024x768 at 60hz on dell m90.
[03:49] <enzo__> stdin: Not that a made a difference for me, but just for the sake of saying "I already tried that", can you change the offset of the page numbers to "1" (one) and see if you get past page 7
[03:51] <stdin> enzo__: sure, if you tell me how to do that :p
[03:51] <enzo__> Double click on the number and you should get the popup window
[03:51] <enzo__> Once you get the popup window, the offset should say 0 (zero). Change it to 1 (one) and click on OK
[03:54] <stdin> enzo__: I don't get that, I see some "navigator" window
[03:55] <enzo__> Are you viewing the footer?
[03:56] <ubuntu_> hola
[03:56] <ubuntu_> hola
[03:56] <enzo__> !sp | ubuntu_
[03:56] <ubotu> Sorry, I don't know anything about sp - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[03:57] <stdin> !es | ubuntu
[03:57] <ubotu> ubuntu: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[03:57] <stdin> enzo__: I just opened oo.o and double clicked on the "Page 1/1" part
[03:57] <enzo__> !es | ubuntu_
[03:57] <ubotu> ubuntu_: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[03:57] <stdin> too many ubuntus :p
[03:57] <enzo__> The footer to the page, not the nav bar
[03:58] <enzo__> but even more ubuntu users!
[04:00] <stdin> enzo__: I practically never use openoffice, so you're going to have to guide me through it to see if it works
[04:00] <enzo__> stdin: Ok, NP
[04:01] <enzo__> You have a new document, right?
[04:01] <stdin> yep
[04:01] <word> Hi..I upgraded to feisty and my network interface got changed from eth0 to eth1..does anyone know how I could change it back?
[04:02] <enzo_> stdin: With the new document, click on Insert > Footer > Default
[04:02] <stdin> enzo_: ok, done that
[04:03] <enzo_> Click in the footer field (bottom of the page) and then click on Insert > Fields > Page Number
[04:04] <stdin> ok
[04:04] <enzo_> Hmmmm
[04:04] <enzo_> Now I see it
[04:05] <enzo_> Well, double-click on the number 1 and change the offset to 1
[04:05] <enzo_> HA!
[04:05] <stdin> yep
[04:05] <enzo_> I changed the offset to 7 and I see 8 and 9, but no 10 and so on
[04:06] <Crell42> Hi all.  I'm trying to install kmilo on my Thinkpad, but even after removing and reinstalling it it does not show up in either the Kubuntu control panel or in KControl.
[04:08] <Crell42> Any idea how I get it to actually be available so I can get my buttons to work? :-)
[04:09] <stdin> enzo_: yeah, I see something like that too. it worked with changing it to 1 but not anything else
[04:10] <aesebu55> Is the a K tool that shows disk usage?
[04:10] <enzo_> aesebu55: command line...... df -h
[04:10] <stdin> aesebu55: kdirstat
[04:11] <aesebu55> stdin: thanks!
[04:13] <enzo_> stdin: Well, at least I know I'm not losing my mind
[04:17] <BluesKaj> Crell, have you tried system settings / country regional & language/keyborad layout/xkb options ?
[04:18] <thugnasty> hi, what is a good aim client for kubuntu that isn't kopete?
[04:18] <Crell> thugnasty: Kopete and Pigin are the two main Linux IM clients at this point.
[04:18] <BluesKaj> gaim/
[04:18] <aesebu55> I was going to say gaim
[04:19] <albertmk> kooete
[04:19] <albertmk> kopete!
[04:19] <Crell> BluesKaj: Is that where it lives?  I thought it had a "Thinkpad" menu item elsewhere.  The other pages I've found googling say that it does.
[04:19] <albertmk> !kopete
[04:19] <ubotu> Sorry, I don't know anything about kopete - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[04:19] <albertmk> !kubuntu
[04:19] <ubotu> Kubuntu is Ubuntu with KDE, the K Desktop Environment, instead of Gnome. See http://kubuntu.org for more information - For support: #kubuntu - See also !KDE
[04:19] <Crell> Gaim was renamed to Pigin for legal reasons. :-)
[04:19] <thugnasty> ok, should I download the fedora core version?
[04:19] <albertmk> !linux
[04:19] <ubotu> Linux is the kernel (core) of the Ubuntu operating system. Many operating systems use Linux as kernel. For more information on Linux in general, visit http://en.wikipedia.org/wiki/Linux
[04:19] <thugnasty> of pigin
[04:19] <enzo_> Crell: What happened with GAIM?
[04:20] <BluesKaj> Crell, well i'm not sure about laptops , but it's worth a try if nothing else is working ...it's up to you
[04:20] <darkstar61> hi all... this dock/panel > http://www.nuno-icons.com/images/image4282.png is a kde4 only or it's available even for the 3.5.7...?
[04:20] <Crell> enzo_: AOL got snippy again.  See http://pigin.im.
[04:21] <BioVorE> darkstar61: I bet you that is a karamba probably..
[04:21] <BluesKaj> AOhell...they still around ?
[04:22] <darkstar61> BioVorE: ok... i never used it... thnx
[04:22] <Crell> BluesKaj: Nothing in the xkb options indicates function keys.
[04:23] <BluesKaj> bummer
[04:23] <enzo_> I work tech support. AOhelL users are among a special breed
[04:23] <BluesKaj> couldn't get rid of the caps lock prob there either...what good is it :)
[04:25] <word> Hi..I upgraded to feisty and my network interface got changed from eth0 to eth1..does anyone know how I could change it back?
[04:25] <Crell> Well, that's another story entirely. :-)
[04:25] <mrksbrd> is there a program i can use w/kde to connect remotely to a windows based pc????????????
[04:26] <enzo_> mrksbrd: There are a few
[04:26] <Dragnslcr> I think there's an RDC client installed by default. Not sure how good it is
[04:26] <Dragnslcr> You can also install VNC on the Windows computer
[04:27] <mrksbrd> what would be the best & easiest??
[04:27] <enzo_> FreeNX, KRFB/KRDC, Terminal Server Client...
[04:27] <enzo_> Terminal Server Client is pretty good
[04:27] <BluesKaj> mrksbrd, krdc
[04:28] <mrksbrd> Blues would that be a sudo apt prog I can install?
[04:29] <BluesKaj> yes mrksbrd
[04:30] <mrksbrd> would it just be sudo apt-get install krdc??
[04:30] <enzo_> should already be installed
[04:31] <mrksbrd> ok yea i just checked
[04:31] <BluesKaj> yeah, check the k-menu/interenet
[04:32] <mrksbrd> ok got it ty all
[04:32] <AdrianaFox> I was wondering, I just installed my nvidia-glx driver but I can't boot into the graphical now, what would cause that?
[04:32] <hydrogen> try dpkg --reconfigure xserver-xorg
[04:32] <hydrogen> i think thats the right command
[04:33] <AdrianaFox> the install went fine and my attempts at reconfiguring xserv in the past have only served to mess things up further :S
[04:33] <mrksbrd> ok guess it doesn't allow ip addresses, "connect is grayed out
[04:33] <elite101> hello
[04:34] <AdrianaFox> it all went bad after I enabled the nvidia driver
[04:36] <Crell> How do I see all the files that a given package provides?
[04:36] <AdrianaFox> my vid cards the 8800 GTS 640 meg
[04:36] <elite101> 640 thats it?
[04:36] <elite101> must be GTS
[04:36] <elite101> yep lol
[04:36] <AdrianaFox> I just stated that o.o
[04:36] <elite101> sorry i didnt read :(
[04:37] <elite101> its hard to read on this DSL IRC
[04:37] <hydrogen> DSL irc?
[04:37] <AdrianaFox> dunno what the issue is but I installed the driver, enabled it and after I restarted it boots into a black screem o.o
[04:37] <hydrogen> what does one have to do with the other
[04:37] <hydrogen> did you enable nvidia-glx?
[04:37] <AdrianaFox> yes
[04:38] <hydrogen> nvidia-glx-config enable
[04:38] <AdrianaFox> yeps
[04:38] <hydrogen> dunno
[04:38] <wimpies> How can I mount a certain hotplugged automounted disk on some fixed location ?
[04:38] <AdrianaFox> had to boot into the crap vista side of my machine to get on irc :S
[04:39] <elite101> lol im on DSL linux
[04:39] <elite101> my HDD died
[04:39] <elite101> :(
[04:40] <mrksbrd> ok the person i am trying to connct to do they need anything special intalled, i am trying to connect remotely using ip address, but "connect" is grayed out
[04:40] <AdrianaFox> o.o I have have 2 hdd, total 660 gigs of space
[04:40] <elite101> i was going to buy a ATX mini main board online really small @ 185$ but then i ran into a gigabyte board :)
[04:40] <elite101> i have 3tbs but im running on a p3 :)
[04:46] <darkstar61> AdrianaFox: dunno if usefull, but you could try to edit /etc/default/linux-restricted-modules-common and add nv to DISABLED_MODULES=""
[04:46] <pavon> hi, I can't get KMail to send any messages - they just sit in the outbox and when I "send queued messages", nothing happens - not even an error message.
[04:46] <Jucato> pavon: have you checked the Sending settings in KMail?
[04:47] <enzo_> Anyone here know about adding mini-PCI cards to a laptop?
[04:47] <pavon> jucato: I have two servers setup in Accounts->Sending, using the same values as my old mail client
[04:47] <dotz> how do i upgrade from edgy to fiesty? change sources.list every occurance of edgy to fiesty and do update and upgrade?
[04:48] <Jucato> hm...
[04:49] <NickPresta> !update | dotz
[04:49] <ubotu> dotz: See https://help.ubuntu.com/community/UpgradeNotes for upgrading from Kubuntu 6.10 (Edgy Eft) to Kubuntu 7.04 (Feisty Fawn)
[04:51] <enzo_> Jucato: YO!
[04:51] <Jucato> yo enzo_!
[04:51] <Jucato> !upgrade
[04:51] <ubotu> See https://help.ubuntu.com/community/UpgradeNotes for upgrading from Kubuntu 6.10 (Edgy Eft) to Kubuntu 7.04 (Feisty Fawn)
[04:51] <Jucato> hm..
[04:51] <albertmk> yo ?
[04:51] <enzo_> Syn?
[04:51] <enzo_> Ack?
[04:51] <Jucato> dotz: you can also try this: http://kubuntu.org/announcements/7.04-release.php#upgrade
[04:52] <Blazin> can anyone help me install my nvidia driver without me getting a black screen on reboot
[04:53] <NickPresta> !graphics | Blazin
[04:53] <ubotu> Sorry, I don't know anything about graphics - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[04:53] <NickPresta> !nvidia | Blazin
[04:53] <ubotu> Blazin: To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto
[04:53] <Blazin> !graphics
[04:53] <brian__> hello, new to linux, fresh install of Ubuntu and all seems to be working just fine...
[04:54] <Blazin> !nvidia
[04:54] <ubotu> To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto
[04:55] <brian__> hey Nick, are you related to Rocko?
[04:55] <NickPresta> brian__, it's possible but I don't know anyone by that name.
[04:56] <brian__> He's a funk bass player - a really good one.  If you were family you'd know. (had to ask)
[04:58] <genii> BluesKaj: Appreciated but may not mix well with this beer I'm currently drinking :)
[04:58] <brian__> So this morning my wife kept going on and on about how well she knows me...
[04:59] <Jucato> I'm getting addicted to this new source of sugar and caffeine :)
[04:59] <Jucato> er.. slight caffeine only haha
[04:59] <brian__> I got pissed and said "if you know me so well, tell me something that will piss me off and make me happy at the same time"
[04:59] <Jucato> ok... we're really getting offtopic now :/
[05:00] <brian__> She said "That's easy, your brothers penis is slightly smaller than yours"
[05:00] <Jucato> !language | brian__
[05:00] <ubotu> brian__: Please watch your language and keep this channel family friendly.
[05:00] <genii> Jucato: I think I'm gonna not mix drinks LOL
[05:01] <genii> possibly India Pale Ale
[05:01] <otto_> hi, I'm on recovery mode. I can only use startx as root. How do I start X as my user?
[05:01] <otto_> I forgot the command
[05:01] <genii> otto_: telinit 2    then login as usual
[05:01] <otto_> init 2?
[05:02] <genii> yes
[05:02] <otto_> brb
[05:02] <otto_> thx
[05:02] <Jucato> otto_: login as your user in the command line then startx
[05:02] <genii> telinit not init
[05:02] <genii> bah left already
[05:02] <dotz> hmm something seems to be stuck in apt-get update
[05:02] <clark> complete newb here, running Kubuntu(fiesty) where is the terminal window?
[05:02] <dotz> keep getting 99% waiting for headers and still waiting
[05:03] <Jucato> clark: K Menu -> System -> Konsole
[05:03] <Jucato> clark: or Press Alt+Space, type Kons and press enter
[05:03] <genii> clark: Konsole
[05:03] <clark> k thanks
[05:03] <Jucato> genii: booze making you slow :P
[05:03] <genii> Jucato: Likely. that and carpal tunnel
[05:03] <dotz> 99% [Connecting to sg.archive.ubuntu.com (137.132.69.169)] 
[05:04] <Jucato> ouch...
[05:04] <dotz> is it down?
[05:04] <meuhlol> maybe
[05:04] <stdin> dotz: you can try with another mirror if you want
[05:04] <hydrogen> loads fine here
[05:05] <dotz> which one works?
[05:05] <dotz> i remove the sg. ?
[05:05] <genii> sg=country
[05:05] <meuhlol> dotz try another
[05:05] <genii> You can put any country code near you for sg
[05:05] <meuhlol> like us.archive...
[05:05] <genii> exactly
[05:06] <dotz> ok now its working!!!!
[05:06] <stdin> :p
[05:07] <elite101> help im running on DSL my HDD died and i lost all my files :( i have to buy a new one now :(
[05:07] <brian__> I'm looking for a program simular to Windows Movie Maker for video conversion - any thoughts?
[05:08] <elite101> conversion
[05:08] <elite101> or producing?
[05:08] <brian__> first conversion, later I might dable in producing
[05:08] <genii> stdin :)
[05:09] <genii> ubuntustudio I hear is good
[05:09] <elite101> well im not sure in linux? but i would only know for video converting i would use PSPVideo9 lol
[05:09] <elite101> unles u run windows and have a psp :P
[05:10] <BioVorE> mplayer and mencoder do a good job.. there all comand line interfaces though..
[05:10] <darkstar61> brian__: avidemux for conversion and kino for the editing...
[05:10] <BioVorE> brian__: kino is the closes thing I have seen..  Its not all that great..
[05:11] <brian__> ok, I'll take a look
[05:12] <darkstar61> brian__: if you feel brave enough you could try a look to cinerella
[05:12] <brian__> why?  is the learning curve high, or does the software suck?
[05:13] <AdrianaFox> ok so I purged the driver and changed the xorg back to default and I am back in the graphical
[05:14] <darkstar61> brian__: is more complex than kino http://www.heroinewarrior.com/cinelerra.php3
[05:14] <Crell> .php3????
[05:14] <darkstar61> brian__: i mean kino is like wmm and cinerella is more on the avid/premiere way...
[05:15] <brian__> wow, thanks for that link
[05:15] <BluesKaj> brian__, there are 2 versions of Tovid CLI and GUI , it works well for video transcoding to dvd from various formats, but avidemux and Acidrip do as well.
[05:15] <darkstar61> de nada... :)
[05:15] <dotz> W: GPG error: http://kubuntu.org edgy Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY A506E6D4DD4D5088
[05:15] <dotz> W: You may want to run apt-get update to correct these problems
[05:15] <genii> I've generally found high learning curves meangreat reward
[05:15] <dotz> should i do the gpg-key or something
[05:16] <dotz> deb http://kubuntu.org/packages/kde-356-pre-feisty-upgrade/ edgy main <-- i added this to upgrade from edgy to fiesy
[05:18] <stdin> dotz: gpg --recv-keys DD4D5088 && gpg --export -a DD4D5088 | sudo apt-key add -
[05:18] <AdrianaFox> ok heres a pastebin of my xorg log o.o http://pastebin.ca/674302
[05:19] <AdrianaFox> I also tried the dpkg-reconfigure xserver-xorg commad for it and nothing
[05:19] <brmassa> guys, im using kubuntu gutsy. i installed flash but my konqueror is crashing every single page where there is flash.
[05:20] <dotz> ok done! so after that i do apt-get upgrade to upgrade to fiesty?
[05:20] <dotz> do i still need to change all edgy in sources.list to fiesty, or the system will do that
[05:20] <brmassa> how can i fix it?
[05:21] <stdin> dotz: just carry on with the upgrade with adept
[05:21] <stdin> brmassa: gutsy help in #ubuntu+1
[05:22] <AdrianaFox> <------ok nvidia driver issue person here is pastebin of my xorg log http://pastebin.ca/674302
[05:22] <meuhlol> plop stdin :)
[05:22] <dotz> i'm using terminal to do that..is it the same?
[05:23] <brmassa> stdin, i think i had the same problem on feisty but i dont reacll what i did..
[05:23] <stdin> dotz: just follow http://www.ubuntu.com/getubuntu/upgrading#head-6146e7b1dd7a50f5029fd0704e38cad9420c000a
[05:24] <brian__> Once again, I'm brand spanking new to Linux - so Iwhy is there such a lack of
[05:24] <brian__> support for wireless
[05:26] <stdin> brian__: because the hardware vendors don't make drivers for linux so we have to "reverse engineer" them. and if they do make drivers, they make them closed source so they can't be easily distributed < Is the short answer
[05:27] <AdrianaFox> ok I was having issues with my nvidia driver, I tried the dpkg-reconfigure thing and it solved nothing, I had to purge the driver and restore the xorg to its defaults...here is my xorg log http://pastebin.ca/674302
[05:27] <Jucato> whew! thanks!
[05:27] <Dragnslcr> The shorter answer is because Broadcom is a bunch of [insert word stronger than "jerks" here] 
[05:29] <AdrianaFox> ok I was having issues with my nvidia driver, I tried the dpkg-reconfigure thing and it solved nothing, I had to purge the driver and restore the xorg to its defaults...here is my xorg log http://pastebin.ca/674302
[05:29] <genii> Anyone running a Gutsy Tribe 5 CD install? I got some weird prepends to my menu items like _:menu item kmenu: Actual progame here
[05:30] <genii> No one in #ubuntu+1 seems to be interested :) Thought I'd see here
[05:30] <AdrianaFox> no one here seems interested in my driver issue either -_-
[05:31] <AdrianaFox> I just want to know why the driver install for nvidia had to become so complicated o.o
[05:33] <AdrianaFox> ok I was having issues with my nvidia driver, I tried the dpkg-reconfigure thing and it solved nothing, I had to purge the driver and restore the xorg to its defaults...here is my xorg log http://pastebin.ca/674302
[05:33] <genii> Jucato: Thanks i'll give it a go :)
[05:33] <drewsus> hello. can you run ubuntu on an eMac? (powerpc g4)
[05:34] <hydrogen> !ppc
[05:34] <ubotu> PowerPC.  Formerly used by Apple for the Macintosh line of computers. Variants are now used in popular gaming consoles. PPC was a fully supported Ubuntu architecture up to and including edgy. It is now a community port, see https://wiki.ubuntu.com/PowerPCFAQ
[05:36] <brian__> PPC was the last dying hope of the Amiga computer system.  That was my platform of choice not so long ago.
[05:36] <brian__> Does anyone remember the Amiga?
[05:36] <unclephreak> i had a 1200
[05:36] <JustRob> I remember the video toaster
[05:37] <JustRob> used oneof those for awhile
[05:37] <unclephreak> i used to love my amiga
[05:37] <brian__> I've owned them all.  Such a sad story...
[05:37] <unclephreak> that thing would not slow down till you got into the last kilobyte of memory
[05:38] <unclephreak> my first computer was an amiga 1000
[05:38] <unclephreak> then i got a 500 then i got my 1200
[05:38] <brian__> I had an A1200 in a tower conversion with an Apollo 68060 upgrade - it kicked ass!
[05:39] <unclephreak> doesnt linux have an amigados emm?
[05:39] <brian__> Yep, it's called UAE
[05:39] <unclephreak> my brother was telling me something baout it
[05:39] <stdin> !ot | unclephreak, brian__
[05:39] <ubotu> unclephreak, brian__: #kubuntu is the official Kubuntu support channel, for all Kubuntu-related support questions. Please use #kubuntu-offtopic for general chatter. Thanks!
[05:39] <drif> ah, good'ol amiga
[05:41] <brian__> hey there ubotu, talking about emulation on a Linux platform is on topic so relax ok?
[05:41] <unclephreak> hehe
[05:41] <drewsus> hey, thanks for the info guys!
[05:41] <genii> stdin: heh
[05:42] <Jucato> ooh stdin!
[05:42] <stdin> stdout has gone, well, out :)
[05:42] <hydrogen> !ot < /dev/null
[05:42] <ubotu> Sorry, I don't know anything about ot < /dev/null - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[05:42] <Jucato> heh
[05:44] <brian__> back on topic:  Anybody know where to order Penguin stickers to cover the Windows logo on my keyboard?
[05:44] <JustRob> thinkgeek.com
[05:44] <stdin> brian__: that's not on topic either...
[05:44] <Jucato> :)
[05:44] <AdrianaFox> ok I was having issues with my nvidia driver, I tried the dpkg-reconfigure thing and it solved nothing, I had to purge the driver and restore the xorg to its defaults...here is my xorg log http://pastebin.ca/674302
[05:44] <Jucato> AdrianaFox: how did you try to install it?
[05:44] <unclephreak> i think dell makes ubuntu stickers for their ready made ubuntu boxes they sell
[05:45] <AdrianaFox> standard sudo apt-get install nvidia-glx
[05:45] <sumguy231> @unclephreak: perhaps, but not for the Win keys.
[05:45] <Jucato> AdrianaFox: did you install linux-restricted-modules-generic as well?
[05:45] <AdrianaFox> nope
[05:45] <unclephreak> ahhh
[05:45] <dotz> may i know how to uninstall an application fully? like all their setting files etc.. eg: kopete ..
[05:45] <brian__> (sigh)  sometimes the sarcasm just gets lost...
[05:46] <AdrianaFox> do I do that with my kernel version?
[05:46] <Jucato> dotz: purge it, in Adept. or sudo apt-get remove --purge <package>
[05:46] <stdin> AdrianaFox: no, that will pull the right package
[05:46] <sumguy231> or sudo aptitude purge <package>
[05:46] <Jucato> dotz: take note though that it only removes system settings files. not the ones in your /home
[05:46] <AdrianaFox> okies
[05:47] <AdrianaFox> hmm it says it's already installed o.o;
[05:47] <drif> AdrianaFox: why not use BinaryDriversHowto?
[05:47] <dotz> Jucato: how can i fully remove the settings from /home too? do i have to do it manually?
[05:47] <stdin> AdrianaFox: did you also run "sudo nvidia-xconfig" ?
[05:47] <Jucato> dotz: manually.
[05:48] <dotz> because somehow the setting files are corrupted..it keep crashing my kopete
[05:48] <AdrianaFox> I ran sudo nvidia-glx-config enable
[05:48] <dotz> need to do full install
[05:48] <darkstar61> AdrianaFox: do you try the edit /etc/default/linux-restricted-modules-common and add nv to DISABLED_MODULES="" ...
[05:49] <intelikey> anyone know off hand what module the isa pnp at-1500 nic needs ?
[05:49] <stdin> dotz: the kopete settings file is ~/.kde/share/config/kopeterc
[05:49] <Jucato> AdrianaFox: you installed linux-restricted-modules-generic? run "sudo nvidia-xconfig"
[05:50] <drif> intelikey: pcnet perhaps?
[05:51] <AdrianaFox> ok so how do I enable 3D graphics?
[05:51] <Jucato> AdrianaFox: you have to restart the X server for changes to take effect
[05:51] <brian__> Do you folks see some kind of standardization in the Linux distro's in the future?  There are so many which I believe hurts the "would-be converts".
[05:52] <AdrianaFox> yes I know, but about the 3D graphics though is there anything I have to change in the xorg file?
[05:52] <intelikey> drif pcnet32    no.
[05:52] <drif> intelikey: actually might have mixed up - lance
[05:52] <Crell> brian__: There already is.  It's called LSB, and almost every distro is compatible or nearely so with it.
[05:52] <intelikey> lance is a no go also
[05:53] <Crell> There's really only 4 structures anymore: Debian style, Red Hat style, Gentoo, and "embedded turnkey stuff" like IPCop, which is frequently based on Debian or Red Hat.
[05:53] <drif> intelikey: kernel config says lance for amd a1500 - or is it not amd?
[05:53] <brian__> So what your saying is the salt and pepper is the same - it's only the containers that are different?
[05:53] <dotz> great.. i removed the kopeterc file and now its working
[05:54] <sumguy231> @brian: there's also the freedesktop.org standards which KDE and Gnome use.
[05:54] <intelikey> drif  let me look again   it is isa pnp  i'll get the specs.
[05:54] <sumguy231> It's not a formal standards group per se, but it's a nice collaboratione ffort.
[05:55] <intelikey> ATI-1500 Ethernet Network Adaptor
[05:55] <brian__> I just can't see people paying for software much longer.  There are some many quality apps out there.
[05:57] <drif> intelikey: only at1700 :-\
[05:58] <brian__> It's interesting, back in my Amiga days, I would send money as an "offering" to some guy developing an application for his shareware.  He would put me on his "free upgrade" list and I had zero worries.  This has to be the wave of the future.
[06:01] <drif> intelikey: you've got some hardware there..
[06:03] <intelikey> drif :)
[06:03] <drif> intelikey: on many references it goes into lance-category - could it require some external params - being such old school?
[06:04] <intelikey> drif well i've went through all the modprobe a* list as well as modprobe ne*   nothing.
[06:04] <drif> intelikey: it's Allied Telesis A-1500 (http://7cube.com/tmp/lancard.htm)
[06:04] <intelikey> drif yeah it could,   indeed   but i'm just trying to see if i can get the old man to talk again, it's not a show stopper if it dont.
[06:04] <infuser> does anyone know if it's possible to get an nvidia 8500GT card working with Feisty?
[06:05] <intelikey> i'll reboot the box switching cards and see if the other one works.
[06:05] <drif> intelikey: we have everything so easy and accessible these days, don't we? :D
[06:05] <intelikey> :)
[06:06] <dotz> hi, in the instructions of updating from edgy to fiesty, it instructed to check on update manager's version by doing dpkg -l update-manager.. but i'm getting No packages found matching update-manager. Does it mean i have to get it installed first? (ps im using kubuntu edgy but the guide is in ubuntu edgy)
[06:07] <intelikey> drif i'm testing old network cards i have lying around,   have three in that box ATM two working one not.  the ati is the one not the other are so  i'm good with that.  i have three more to test.  and four already marked usable
[06:08] <stdin> dotz: just follow http://www.ubuntu.com/getubuntu/upgrading#head-6146e7b1dd7a50f5029fd0704e38cad9420c000a
[06:09] <brian__> Question:  When I upgrade from the Multiverse do I have access to software from Fluidic Space where species 84762 resides?
[06:09] <Daisuke_Laptop> ...huh?
[06:09] <stdin> ^ bad, very bad. no supper for you
[06:10] <Daisuke_Laptop> did i slip into an alternate dimension where genetically engineered species are available in the repos?
[06:10] <brian__> (grin)
[06:14] <brian__> Deep thought:  Take a picture of a camera and stare at it - deep huh?
[06:19] <brian__> a
[06:19] <brian__> a
[06:19] <brian__> a
[06:19] <stdin> brian__: what are you doing?
[06:19] <brian__> oops, nothing worth mentioning
[06:24] <dotz> Failed to fetch http://security.ubuntu.com/ubuntu/dists/feisty-security/main/binary-i386/Packages.bz2 MD5Sum mismatch
[06:24] <dotz> Failed to fetch http://security.ubuntu.com/ubuntu/dists/feisty-security/universe/binary-i386/Packages.bz2 MD5Sum mismatch
[06:24] <dotz> i'm getting it from the upgrade..hmm
[06:25] <brian__> frank, were all getting it some way...
[06:25] <frank_> Firefox crashes often.   Just blinks-out.   Is this common?
[06:26] <brian__> hey frank, I do this on the drive home from work - get used to it...
[06:27] <sumguy231> @frank: nope. Are the crashes seemingly random?
[06:27] <frank_> Prretty much.
[06:28] <sumguy231> Hmm... Long story short you might want to try creating a new Firefox profile and moving some of your stuff over. That's about the simplest way when the crashes are random.
[06:28] <frank_> I've mostly used it to view reddit & digg.
[06:28] <frank_> No stuff to move.
[06:29] <sumguy231> Good then. :) Use these instructions: http://kb.mozillazine.org/Profile_Manager#Linux
[06:29] <sumguy231> If you do happen to think of something to move, read this:
[06:30] <sumguy231> http://kb.mozillazine.org/Migrating_settings_to_a_new_profile
[06:30] <brian__> Sometimes it hurts when I poop.
[06:30] <dotz> can anyone help?
[06:30] <frank_> Thank you, SumGuy.
[06:31] <frank_> Jeez, poopping is the only thing I can depend on to feel good.
[06:31] <Dr_willis> dotz,  could be the servers are geting updated or somtning at this time. try again later perhaps?
[06:31] <sumguy231> @frank: you're welcome, hope it turns out well. :)
[06:31] <sumguy231> @brian: you might want to try purge removing and reinstalling libpoop0.
[06:31] <dotz> Dr_willis: maybe i'll try another server besides us .. where can i get a list of servers (list by countries)
[06:32] <Dr_willis> i always just use easysource web site
[06:32] <Dr_willis> !easysource
[06:32] <ubotu> source-o-matic is a webpage where you can (re)generate your sources.list - http://www.ubuntu-nl.org/source-o-matic
[06:32] <Dr_willis> Get:39 http://security.ubuntu.com  seems to be working here for me
[06:33] <dotz> ok thanks
[06:41] <dotz> ok
[06:42] <dotz> i'm still getting the MD5SUM error when upgrading
[06:42] <dotz> after changing my sources.list to MY
[06:42] <dotz> anyone help?
[06:42] <dotz> !md5sum
[06:42] <ubotu> To verify the integrity of a download, use the md5sum - see https://help.ubuntu.com/community/HowToMD5SUM for more
[06:48] <dotz> anyone knows why i get a md5sum error when upgrading to fiesty?
[06:48] <intelikey> how is the network guru here   ?     i need some info
[06:48] <intelikey> who ^
[06:50] <intelikey> i guess i wont ask.   i was hoping for a violenteer
[06:51] <dotz> tried changing US to MY to SG, all getting the same error
[06:51] <intelikey> so let me ask another Q   anyone ever setup multiple nic cards using the same or different static ip's ?   what all is involved ?
[06:51] <dotz> !upgrade
[06:51] <ubotu> See https://help.ubuntu.com/community/UpgradeNotes for upgrading from Kubuntu 6.10 (Edgy Eft) to Kubuntu 7.04 (Feisty Fawn)
[06:56] <unique> hello l am verry new to linux
[06:56] <unique> i need help on finding Wine 0.9.44 Released and installing it
[06:56] <thirupathib> hi all, in my sever i m getting this error "BUG: soft lockup detected on CPU#1!" and on CPU#0 also, and i am unable to start the system. help please???
[06:57] <stdin> unique: http://www.winehq.org/site/download-deb
[06:58] <unique> ty
[06:59] <dotz> help, Failed to fetch http://security.ubuntu.com/ubuntu/dists/feisty-security/main/binary-i386/Packages.bz2  MD5Sum mismatch , while upgrading to fiesty, what shd i do
[07:00] <stdin> dotz: nothing you can do, try waiting
[07:08] <unique> sudo wget http://wine.budgetdedicated.com/apt/sources.list.d/feisty.list -O /etc/apt/sources.list.d/winehq.list
[07:08] <unique> ??
[07:08] <stdin> run that in a terminal...
[07:09] <unique> then
[07:09] <stdin> then "sudo apt-get update && sudo apt-get install wine"
[07:10] <unique> wow ty
[07:12] <unique> Setting up wine (0.9.43~winehq0~ubuntu~7.04-1) ... now its done?
[07:13] <stdin> yes
[07:13] <Jucato> when you get your prompt back, it's done
[07:13] <unique> what do i do
[07:14] <unique> ?
[07:14] <stdin> what ever you want, it's installed now
[07:15] <unique> how do i open it
[07:16] <stdin> unique: read https://help.ubuntu.com/community/Wine
[07:16] <unique> sorry learning
[07:32] <sergey> Wazzap!
[07:32] <sergey> Any russians here?
[07:33] <Jucato> !ru
[07:33] <ubotu>    #ubuntu-ru       /  Pozhalujsta vojdite v #ubuntu-ru dlq pomoshchi na russkom qzyke
[07:33] <popt> error while loading shared libraries: libopenal.so.0: cannot open shared object file: No such file or directory
[07:34] <Tix> skatopia
[07:34] <popt> can I install this lib?
[07:34] <Tix> densy
[07:34] <popt> libopenal.so.0
[07:34] <Tix> skatopia.com
[07:34] <stdin> popt: sudo apt-get install libopenal0a
[07:34] <Tix> densy.com
[07:35] <Jucato> Tix: stop spamming
[07:35] <Jucato> oh ok hahah :)
[07:35] <stdin> I get board quick :p
[07:35] <neusonce> grrrrrrrrrrrrrrrrrrr guys im  just did a fresh install of kubuntu and now everythings going to s**t , i was locked out of adept  fixed that now  it wont allow me to  make any changes  if fear it will futher screw with its self   any ideas
[07:36] <popt> thanks stdin
[07:36] <Jucato> I am sooooo out of it
[07:36] <terrestre> !es
[07:36] <ubotu> Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[07:37] <stdin> Jucato: Hobbsee added me a couple weeks ago :)
[07:37] <Jucato> aah congrats then :)
[07:38] <stdin> someone had to fill those boots of yours :p
[07:38] <Jucato> waaaah :(
[07:38] <Jucato> that's what I get for taking a vacation...
[07:38] <Jucato> I lose my throne.. but worse of all my boots!!
[07:38] <stdin> aww, i'll share them with you
[07:38] <stdin> like a timeshare :p
[07:38] <Jucato> hehe
[07:40] <stdin> neusonce: make sure you're opening adept with kdesu, try it from the run dialog "kdesu adept_manager", if that works try editing the menu entry and put kdesu before the command
[07:40] <Jucato> or maybe..
[07:40] <Jucato> !adeptfix
[07:40] <ubotu> If Adept crashed on you and your database is locked, try this in konsole:  sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a 
[07:40] <Jucato> just maybe :)
[07:41] <stdin> ohh, now it's a competition ;)
[07:42] <Jucato> nah you have the wheel...
[07:42] <Jucato> er... forth
[07:47] <neusonce> nope still dosent work
[07:47] <neusonce> another install
[07:47] <agent8> i
[07:58] <ubuntu> is this the kubuntu help channel?
[07:59] <intelikey> it's supposed to be
[07:59] <ubuntu> lol
[07:59] <ubuntu> i kinda messed up
[07:59] <ubuntu> and like....fagged up my xorg.conf file
[07:59] <ubuntu> and like... when i reconfigure it and all
[07:59] <ubuntu> to the defaults
[07:59] <ubuntu> its says mdadm: Device not found
[08:00] <ubuntu> something to that nature
[08:00] <ubuntu> when booting up
[08:00] <ubuntu> and im like >.<
[08:00] <intelikey> mdadm has nothing to do with xorg
[08:00] <jmichaelx> i don't think that is an xorg issue
[08:00] <intelikey> !info mdadm
[08:00] <ubotu> mdadm: tool to administer Linux MD arrays (software RAID). In component main, is optional. Version 2.5.6-7ubuntu5 (feisty), package size 225 kB, installed size 664 kB
[08:00] <jmichaelx> that has to do with raid
[08:00] <jmichaelx> lol sorry
[08:00] <ubuntu> i dont have raid or use raid
[08:01] <ubuntu> it happend after i fiddled with the xorg file
[08:01] <jmichaelx> remove mdadm
[08:01] <ubuntu> ....i never installed it
[08:01] <intelikey> ubuntu if you want to get rid of it you can.    it's installed automaticly
[08:01] <ubuntu> ok how do i dispose of it?
[08:02] <intelikey> sudo apt-get remove mdadm
[08:02] <intelikey> or any other packagemanagement frontend
[08:02] <intelikey> !dpkg
[08:02] <ubotu> dpkg is the Debian package maintenance system, which together with apt forms the basic Ubuntu package management toolkit.
[08:02] <ubuntu> hmm ok im using the live cd thing to be here right now so ill test it to see if it works
[08:03] <ubuntu> cause none of this happed untill i added a lil line to the xorg.conf file
[08:03] <ubuntu> then it went boom
[08:03] <intelikey> ;)
[08:03] <ubuntu> i shall return thanks
[08:04] <robertwoes> anyone awake?
[08:05] <intelikey> no
[08:07] <robertwoes> look i just wanted help with something... I switched to kubuntu by downloading kubuntu-desktop package.  I will be using KDE exclusively from now on. so to save disk space I deleted the ubuntu-desktop and GNOME stuff
[08:07] <robertwoes> do i need to change my sources.list?
[08:08] <stdin> robertwoes: no, both use the same package sources
[08:08] <robertwoes> I don't want to end up with gnome when i upgrade
[08:09] <stdin> robertwoes: as long as you have no gnome packages, you won't when you upgrade either
[08:09] <Jucato> stdin: he installed kubuntu-desktop on top of ubuntu..
[08:09] <robertwoes> suhweet
[08:09] <Jucato> oh yeah
[08:09] <Jucato> nvm
[08:09] <Jucato> didn't read the whole thing hahaha
[08:09] <intelikey> robertwoes *buntu = *buntu = *buntu   it's all one OS  everything avalable to any buntu is avalable to all.
[08:10] <robertwoes> thanks... so I will not worry then.
[08:11] <vers> this is awsome
[08:11] <robertwoes> what is awesome?
[08:12] <vers> i just got this ubuntu ...and...i think its pretty cool
[08:12] <robertwoes> :)
[08:12] <intelikey> linux is good
[08:12] <vers> i never been on a linux machine before..i have no idea what im doing
[08:13] <vers> but im slowly figuring it out..i went and got some books
[08:13] <robertwoes> vers: I like O'Reilly books
[08:13] <vers> yeah..i picked up a few today
[08:13] <robertwoes> can i ask which ones?
[08:13] <vers> very helpful
[08:14] <vers> essential commands-Linux...what im lookin thu now...the other two r in the car
[08:14] <vers> dthru*
[08:15] <vers> lol
[08:15] <vers> have any suggestions
[08:15] <robertwoes> i would suggest that you learn a command-line text editor before anything
[08:15] <vers> ohh yeah...portable unix-hiley
[08:16] <vers> and how do i go about doing that
[08:16] <vers> book?
[08:16] <robertwoes> http://tldp.org/guides.html
[08:16] <intelikey> !cli | vers
[08:16] <ubotu> vers: The linux terminal or command-line interface is very powerful. Open a terminal via Applications -> Accessories -> Terminal (Gnome) or K-menu -> System -> Konsole (KDE).  Guide: https://help.ubuntu.com/community/UsingTheTerminal
[08:17] <vers> great ..thanks
[08:17] <intelikey> open a terminal  and type    man intro
[08:17] <intelikey> or   man man
[08:17] <robertwoes> http://www.linuxhelp.net/guides/vim/
[08:17] <dotz> oh great, now the upgrading is beginning
[08:17] <vers> see...thats awsome
[08:17] <intelikey> then you will know how to find info on what ever command you happen to want to use.
[08:18] <intelikey> is vim installed by default in kubuntu now ?
[08:18] <Jucato> vim-tiny is
[08:18] <Jucato> iirc
[08:18] <intelikey> k
[08:19] <intelikey> i know *buntu defaults to using    nano
[08:19] <intelikey> and intelikey defaults to using    mc -e
[08:19] <robertwoes> if you want to avoid info's built-in navigation system, pipe it through less:  ie - $ info konsole | less
[08:20] <jimmy__> hello?
[08:20] <jimmy__> is anyone here?
[08:20] <robertwoes> try to use a standard editor or you will get sick of lugging it around with you
[08:21] <jimmy__> whats that mean
[08:21] <intelikey> jimmy__ it wasn't for you.
[08:21] <jimmy__> i am a newer using linux
[08:21] <jimmy__> and i got some troubles
[08:21] <ubuntu> yeah it didnt work
[08:22] <ubuntu> maybe it is a raid problem
[08:22] <vers> thanks folks....you guys were awsome....
[08:22] <ubuntu> but i dont see how it was cause by editing the xorg file
[08:22] <jimmy__> can anyone help me
[08:22] <intelikey> ubuntu it wasn't.       co-incident
[08:22] <ubuntu> im not sure how it could be
[08:23] <ubuntu> like i editing the xorg then rebooted, didnt do anything else
[08:23] <ubuntu> hmmm
[08:23] <intelikey> jimmy__ not without more information.
[08:23] <ubuntu> i have no clue how to fix it
[08:23] <jimmy__> jabber-common
[08:23] <jimmy__> jabber
[08:23] <jimmy__> jabber-msn
[08:23] <jimmy__> pymsnt
[08:23] <jimmy__> E: Sub-process /usr/bin/dpkg returned an error code (1)
[08:23] <robertwoes> vers: concentrate on learning a text editor, bash scripting, PERL and/or Python
[08:24] <vers> ok....at least i know where to start now
[08:24] <robertwoes> ;)
[08:24] <intelikey> ah  dpkg.     jimmy__   sudo dpkg --configure -a    and report back the "first" error message it burps out
[08:24] <vers> is this a world wide chat
[08:24] <jimmy__> hmm.
[08:25] <intelikey> vers yes.
[08:25] <jimmy__> can you speak in chinese
[08:25] <vers> yup
[08:25] <vers> can u
[08:25] <intelikey> !zh
[08:25] <ubotu> For Ubuntu help in Chinese  #ubuntu-cn  #ubuntu-tw   #ubuntu-hk
[08:25] <ubuntu> is there a way to reinstall kubuntu without deleting all my stuff?
[08:26] <intelikey> ubuntu yeah don't let it "format" anything.  but that may not fix your issue.
[08:27] <robertwoes> what's the problem ubuntu?
[08:27] <ubuntu> hmmm
[08:27] <ubuntu> well
[08:27] <jimmy__> jimmy@jimmy-laptop:~$ sudo dpkg --configure -a
[08:27] <jimmy__> Password:
[08:27] <jimmy__>  pymsnt (0.11.2-1ubuntu2) ...
[08:27] <ubuntu> when i  edited my xorg.conf file
[08:27] <ubuntu> i rebooted
[08:27] <dotz> .  /dev/hda1             5.5G  4.3G  914M  83% / <-- what could be taking up so much space?
[08:27] <jimmy__> chown: /var/run/pymsnt: 
[08:27] <jimmy__> dpkg pymsnt (--configure)
[08:27] <dotz> i need to clear up for the upgrades
[08:27] <jimmy__>  post-installation script1
[08:27] <jimmy__>  jabber-common (0.4) ...
[08:27] <dotz> its prompting not enough diskspace
[08:27] <jimmy__> chown: /var/run/jabber/: 
[08:27] <jimmy__> dpkg jabber-common (--configure)
[08:27] <ubuntu> and now i get a messages mdadm : no such device in configuration file not found or something close to it
[08:27] <jimmy__>  post-installation script1
[08:27] <dotz> is it safe to remove what is inside /usr/src ?
[08:28] <jimmy__> dpkg jabber 
[08:28] <jimmy__>  jabber  jabber-common
[08:28] <jimmy__>   Package jabber-common is not configured yet.
[08:28] <jimmy__> dpkg jabber (--configure)
[08:28] <jimmy__>   - 
[08:28] <jimmy__> dpkg jabber-msn 
[08:28] <jimmy__>  jabber-msn  jabber (>= 1.4.3)
[08:28] <jimmy__>   Package jabber is not configured yet.
[08:28] <ubuntu> and now i cant get the thing to boot up
[08:28] <jimmy__> dpkg jabber-msn (--configure)
[08:28] <vers> no
[08:28] <jimmy__>   - 
[08:28] <jimmy__> 
[08:28] <vers> and i dont speak
[08:28] <robertwoes> lol
[08:28] <jimmy__>  pymsnt
[08:28] <jimmy__>  jabber-common
[08:28] <vers> sorry
[08:29] <jimmy__>  jabber
[08:29] <jimmy__>  jabber-msn
[08:29] <jimmy__> jimmy@jimmy-laptop:~$
[08:29] <jimmy__> here it is
[08:29] <jimmy__> you mean..
[08:29] <jimmy__> dont post in chinese?
[08:29] <NickPresta> !ops
[08:29] <ubotu> Help! Riddell, fdoving, Mez, jpatrick, seth_k, apokryphos, nalioth, Hobbsee, robotgeek, imbrandon, gnomefreak, Hawkwind, trappist, LjL, Jucato,  haggai, fooishbar, crimsun, seth, apokryphos, DBO, nixternal or PriceChild!
[08:29] <ubuntu> isnt this english only?
[08:29] <vers> i can hear tho
[08:29] <NickPresta> Thanks, Jucato
[08:29] <ubuntu> ty
[08:29] <robertwoes> heh
[08:29] <ubuntu> so yeah i think something with raid is messed up some how
[08:29] <ubuntu> and i have no clue how to fix it
[08:29] <Jucato> hm... why isnt' stdin on that list...
[08:29] <vers> ...mute
[08:29] <robertwoes> lmao
[08:30] <ubuntu> this is depressing
[08:30] <dotz> hi i need to free up the space in / partition.. but i don't know what is safe to remove..please advise
[08:30] <intelikey> -"Apost-installation scriptA[A1   found in /var/lib/dpkg/info/     name <packagename>.postinst      you can look into fixinf it or remove the package...
[08:30] <robertwoes> I can'
[08:30] <vers> but i can type.......yeah
[08:30] <stdin> Jucato: heh, not sure actually :p
[08:30] <robertwoes> t help you ubuntu -- no clue here
[08:30] <thugnasty> hey, is there anyway that I can have flash work in konqueror?
[08:31] <NickPresta> !flash | thugnasty
[08:31] <ubotu> thugnasty: To install Flash see https://help.ubuntu.com/community/RestrictedFormats/Flash - Flash 9 is now available in dapper-backports and edgy-backports - See also !Restricted and !Gnash
[08:31] <ubuntu> is there a way to set everything back to default?
[08:32] <robertwoes> are you having the same problem as another user ubuntu?
[08:32] <ubuntu> i dont knonw
[08:32] <intelikey> ubuntu  errr ummm    dpkg-reconfigure -phigh -a       might do it.
[08:32] <robertwoes> make another accout
[08:32] <robertwoes> test it
[08:32] <ubuntu> o i cant even get to the login screen
[08:32] <ubuntu> lol
[08:32] <ubuntu> it stops before booting up all the way
[08:32] <intelikey> why not ?
[08:33] <ubuntu> i dont know why
[08:33] <intelikey> alt+ctrl+f1
[08:33] <ubuntu> hmmm?
[08:33] <ubuntu> i can login via shell
[08:33] <intelikey> yeah
[08:33] <NickPresta> ubuntu, yes.
[08:33] <ubuntu> but that doesnt get me where i want to be
[08:33] <robertwoes> so copy your stuff off that drive lol
[08:33] <ubuntu> huh?
[08:33] <intelikey> but it gets you where you can "try" to fix it...
[08:34] <dotz> isit safe to remove /var/lib ?
[08:34] <intelikey> no
[08:34] <dotz> how about /usr/src ?
[08:34] <ubuntu> i can log in and stuff but with no graphics, just text,  but my problem is i have know idea how to fix it
[08:34] <robertwoes> omg
[08:35] <intelikey> dotz only if you want to reinstall    /var/lib  is as important to the system as /etc is
[08:35] <ubuntu> at first i figured it was an xorg problem, but yall said mdadm is raid
[08:35] <ubuntu> so...yeah
[08:35] <intelikey> dotz /usr/src you can live without
[08:35] <dotz> what could be the key directory to remove to free up space for upgrade?
[08:35] <ubuntu> oi
[08:36] <ubuntu> delete stuff you dont use or need
[08:36] <dotz> or can i specify where to save the upgrades on anohter partition?
[08:36] <intelikey> dotz there really isn't one.
[08:36] <ubuntu> ima try that dpkg thingie
[08:36] <ubuntu> bbl....i hope lol
[08:36] <balvinder> hi
[08:36] <balvinder> all
[08:36] <dotz> apt-get clean cleared about 500mb..i guess its enough now
[08:36] <hayami> hi how can i make a list to load all my songs in xmms?
[08:36] <dotz> isit quite adnormal to see / to fill up so much?
[08:37] <balvinder> is there any who could like explain how to stopservices in kubuuntu..
[08:37] <balvinder> im failry new to all this..
[08:37] <intelikey> dotz you can do   sudo apt-get clean    might free some space.         also /lost+found/    might    and any .Trash/   will.
[08:37] <NickPresta> dotz, if you never 'clean' apt then it's size can grow, yes
[08:37] <intelikey> dotz /tmp or /var/tmp/    but look out for running apps that have data in them,  they will crash or freeze.
[08:38] <robertwoes> get rid of .thumbnails in your home directory -- you might have a lot of old ones
[08:38] <dotz> i used 5.5gb for / last time.. think i should expand it
[08:38] <dotz> home directory is on another partition
[08:38] <Jucato> ???
[08:38] <robertwoes> ah
[08:38] <intelikey> dotz also removing any kernels other than the running one
[08:39] <dotz> oh........yes
[08:39] <robertwoes> aren't man pages cached?
[08:39] <stdin> Jucato: you're still +o
[08:39] <Jucato> waiting for the flooder to return....
[08:39] <Jucato> :)
[08:39] <Jucato> but if you insist...
[08:39] <stdin> hehe
[08:39] <intelikey> robertwoes can be,  it depends on /etc/man.conf  i think
[08:39] <hayami> anyone knows how to create a list of music to play in xmms?
[08:39] <robertwoes> but that wouldn't take up to much space
[08:40] <robertwoes> hardly worth the effort
[08:40] <robertwoes> delete some games
[08:40] <robertwoes> they all suck anyway
[08:40] <intelikey> robertwoes and dotz they would be in /var/cache/cat/  or is it */man/cat*    any way...
[08:40] <robertwoes> yeah that's right
[08:43] <robertwoes> /var/cache/man/catX where X is a digit from 1-9 and a few letters like n..blah blah
[08:48] <robertwoes> anybody try Qingy?
[08:49] <NickPresta> !info quingy
[08:49] <ubotu> Package quingy does not exist in feisty, feisty-seveas
[08:49] <robertwoes> have you tested it ubotu?

[08:51] <intelikey> !bot | robertwoes
[08:51] <ubotu> robertwoes: I am ubotu, all-knowing infobot. You can browse my brain at http://ubotu.ubuntu-nl.org/factoids.cgi - Usage info: http://wiki.ubuntu.com/UbuntuBots
[08:52] <robertwoes> I was wondering what the grin was for
[08:52] <robertwoes> ... lol
[08:53] <robertwoes> http://kldp.org/files/qingy_552.png
[08:53] <robertwoes> ;)
[08:53] <intelikey> in irc one needs to watch for special chars that start a line,  they generally call a bot    ! @ # and * i have seen used.
[08:55] <intelikey> and most bots will respond to their name as well
[08:55] <intelikey> ubotu botsnack
[08:55] <ubotu> Yum! Err, I mean, APT!
[08:56] <robertwoes> interesting
[08:59] <intelikey> ubotu opsnack | Jucato
[08:59] <ubotu> Jucato: Chocolate!  And Peanuts!
[08:59] <Jucato> O.o
[09:03] <intelikey> so somebody tell me how to add a route or what ever i need so that 192.168.1.3 can connect to the world through 192.168.0.2  to 192.168.0.1    ???
[09:03] <intelikey> Jucato you are the networking genious,  help me out here....
[09:03] <intelikey> ;/
[09:06] <hangthedj> if i go to create a tar.gz file with tar -cfz will it automatically get the hidden files?
[09:06] <hangthedj> i'm backing up my home
[09:07] <intelikey> -cfz ?     -czf filename.tgz    but yeah it should.
[09:07] <hangthedj> thanks
[09:12] <intelikey> well i think i remember covering that gound before with someone,  later versions of tar  you can put the z after the f but it's still bad form and a bad habit,  other apps have switches for filename or output-file  and most are not that leanient if you did  tar -cfz filename.tgz /dir/    with older versions  you would get an archive named "z" that was not compressed and contained filename.tgz and /dir/ plus all it's content..
[09:14] <hangthedj> so for a bzip file i would put -cbf and so on?
[09:14] <hangthedj> i'm new at the taring up, i'm good at the un-taring. ;)
[09:15] <stdin> hangthedj: bzip is j not b
[09:15] <hangthedj> right hehe
[09:15] <hangthedj> see, i'm lazy, when untaring things i don't even use those switches, i just hope tar figures it out.
[09:16] <stdin> "man tar" is the way to go :)
[09:16] <Jucato> man:/tar fancies me better
[09:22] <intelikey> now login chump.
[09:24] <ubuntu> it didnt work
[09:24] <NickPresta> ubuntu, what didn't?
[09:24] <ubuntu> sudo dpkg-reconfigure -phigh -a
[09:25] <ubuntu> yeah
[09:25] <ubuntu> trying to fix a mdadm problem
[09:25] <NickPresta> what didn't work? it didn't solve your problem?
[09:25] <ubuntu> yeah
[09:25] <ubuntu> i edited my xorg.conf file
[09:25] <ubuntu> rebooted
[09:25] <NickPresta> oh software RAID?
[09:26] <ubuntu> then got a mdadm error saying No devices spcified in config file
[09:26] <ubuntu> and i was like wtf
[09:26] <ubuntu> reset xorg  to defualt thinkin that was waht the problem was
[09:26] <ubuntu> and still that stupid raid thing
[09:26] <ubuntu> i really dont want to loose all my data by reinstalling kubuntu
[09:27] <neusonce> !java
[09:27] <ubotu> To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository. Enable the backports repository on Edgy to install sun-java6-jre. Please don't use Adept to install Java if you are on Kubuntu 6.10 (Edgy) or earlier.
[09:27] <ubuntu> any ideas?
[09:27] <ubuntu> !raid
[09:27] <ubotu> Raid and LVM --> very easy guide for alternate CD : http://users.piuha.net/martti/comp/ubuntu/raid.html Tips and tricks for RAID and LVM can be found on https://help.ubuntu.com/community/RaidConfigurationHowto and http://www.tldp.org/HOWTO/LVM-HOWTO
[09:28] <ubuntu> hmmm
[09:28] <ubuntu> lol
[09:28] <ubuntu> lets see here
[09:28] <NickPresta> Sorry, ubuntu, I don't really know how to troubleshoot RAID problems. Apart from what is in those links, I'm rather clueless.
[09:28] <ubuntu> i honestly didnt know i was using raid
[09:28] <neusonce> !sources
[09:28] <ubotu> The packages in Kubuntu are divided into various sections. See https://help.ubuntu.com/community/Repositories/Kubuntu
[09:29] <ubuntu> so i am clueless as well
[09:29] <ubuntu> im on my live cd right now
[09:29] <ubuntu> ill try to install without wiping everything
[09:29] <intelikey> ubuntu is your hd partitioned ?
[09:29] <ubuntu> kinda
[09:30] <intelikey> ubuntu is your home and / the same partition ?
[09:30] <ubuntu> i think so
[09:30] <ubuntu> is there a way to find out without rebooting
[09:30] <intelikey> ubuntu is there a partition on the disk that would hold the data in your home partition ?
[09:31] <intelikey> ubuntu less /proc/partitions
[09:32] <intelikey> ubuntu  if they are mounted    df -h     will help with the free space question
[09:32] <ubuntu> ummm im not looking for space
[09:33] <ubuntu> just to not wipe my stuff by reinstalling
[09:33] <intelikey> ubuntu one other question i have before i start making sujestions,   is there any unalocated space where you could install the new system ?
[09:34] <ubuntu> im not sure
[09:34] <ubuntu> i was only using about 40 gb of 80 gbs
[09:34] <intelikey> ubuntu      less /proc/partitions
[09:34] <mimagyc> sorry what is link IRC for french support?
[09:34] <vers> after i download a package i type in the terminal: sudo aptitude install (filename).....rite..is there anything i can do besides this
[09:34] <Hobbsee> !fr
[09:34] <ubotu> Allez a #ubuntu-fr ou #kubuntu-fr pour de l'aide et de la discussion en francais.
[09:34] <intelikey> vers no
[09:34] <mimagyc> thx
[09:35] <ubuntu> hmmm
[09:35] <vers> thanks
[09:35] <intelikey> vers aptitude is for installing from the repos
[09:35] <ubuntu>    8     0   78150744 sda
[09:35] <ubuntu>    8     1   75119908 sda1
[09:35] <ubuntu>    8     2          1 sda2
[09:35] <ubuntu>    8     5    3028221 sda5
[09:35] <ubuntu>    7     0     613524 loop0
[09:35] <ubuntu>  252     0   75119908 dm-0
[09:35] <ubuntu>  252     1    3028221 dm-1
[09:35] <ubuntu> this is what i got
[09:35] <vers> what else can i install from?
[09:35] <intelikey> well there is the raid array
[09:35] <ubuntu> i got no idea wtf raid it lol
[09:36] <ubuntu> is there a way i can just fix that mdadm config file?
[09:36] <neusonce> im missing alot of programs from adept   what the page for adding repositories ?
[09:36] <intelikey> vers dpkg   but that's not the best way.  best way is find the package or simular in the repos and use aptitude
[09:36] <intelikey> !repos | neusonce
[09:36] <ubotu> neusonce: The packages in Kubuntu are divided into various sections. See https://help.ubuntu.com/community/Repositories/Kubuntu
[09:38] <jaganat> SALUDOS
[09:38] <intelikey> ubuntu you need some place to make a backup,   external hd or networked box   or something...
[09:38] <ubuntu> i cant
[09:39] <intelikey> ?
[09:39] <jaganat> anybody knows a internet content filter for Feisty?
[09:39] <ubuntu> no external hd or netowrk
[09:39] <ubuntu> lol
[09:39] <ubuntu> so i cant
[09:39] <intelikey> ubuntu dvd's ?
[09:39] <ubuntu> i got those
[09:40] <ubuntu> is there a way to edit the mdadm config file?
[09:40] <ubuntu> and add those stupid raid things?
[09:41] <hinavietnam> hi all
[09:41] <intelikey> jaganat only iptables.  sorry.       but that doesn't mean there isn't one.
[09:41] <hinavietnam> chan thay mo
[09:42] <intelikey> ubuntu ummm yeah,  it can be fixed,   but i'm not that fellow to walk you through that.
[09:42] <ubuntu> depressing
[09:42] <intelikey> cha na wan ?
[09:42] <jaganat> i tried dansguardian but did not work fot
[09:42] <jaganat> for me
[09:44] <vers> sometimes i get letters in a box all over a page...what is this
[09:44] <ubuntu> mdadm: No devices listed in conf file were found. this is what i get
[09:45] <jaganat> i had k9 web protection in XP
[09:46] <intelikey> either
[09:46] <NickPresta> guys, I've just found the sexiest `top` variant ever. htop
[09:46] <intelikey> that's old news,  but glad you like it.
[09:47] <ubuntu> ima try one last thing then reinstsall
[09:47] <ubuntu> mdadm --examine --scan
[09:47] <neusonce> !sources
[09:47] <ubotu> The packages in Kubuntu are divided into various sections. See https://help.ubuntu.com/community/Repositories/Kubuntu
[09:47] <NickPresta> intelikey, :(
[09:47] <nitesh> how do I  get support for my Motorola A1200 (Motoming) phone. I just want to access the file system of the memory card
[09:48] <neusonce> !sources
[09:48] <ubotu> The packages in Kubuntu are divided into various sections. See https://help.ubuntu.com/community/Repositories/Kubuntu
[09:48] <intelikey> NickPresta well it's been a buzz word in here for months...   sorry if you never noticed.
[09:48] <NickPresta> I never noticed people talking about htop
[09:48] <NickPresta> oh well. It's neat.
[09:49] <intelikey> grep htop from the ubotu log   :)))
[09:49] <NickPresta> !log
[09:49] <ubotu> Channel logs can be found at http://people.ubuntu.com/~fabbione/irclogs
[09:49] <neusonce> whats the multiverse url ?
[09:50] <intelikey> neusonce you just add multiverse to the end of the line with universe and you are set
[09:50] <NickPresta> intelikey, I'm almost tempted to write a script to grep -ic htop on all the logs, even the archived ones. heh.
[09:50] <intelikey> if you don't have either, add both to the end of the line with main restricted
[09:51] <intelikey> NickPresta :)))
[09:52] <neusonce> i dont know the universes url
[09:52] <intelikey> neusonce what part of "they are all the same" did you miss ?
[09:53] <intelikey> deb http://archive.ubuntu.com/ubuntu/ dapper main universe multiverse
[09:53] <intelikey> deb http://archive.ubuntu.com/ubuntu/ dapper-updates main universe multiverse
[09:53] <intelikey> deb http://security.ubuntu.com/ubuntu/ dapper-security main universe multiverse
[09:53] <intelikey> #deb http://archive.ubuntu.com/ubuntu/ dapper-backports main universe multiverse
[09:53] <neusonce> god damm computer playing tricks on me
[09:53] <intelikey> that's my whole sources.list file.
[09:54] <intelikey> and no i don't use "restricted"
[09:55] <intelikey> that same file would work for any version,   just replace  "dapper"  with your brand
[09:56] <intelikey> and if you use "restricted" add that to each line too...   but i don't like tainting the system that way
[09:56] <Murlis> heya!
[09:56] <Murlis> I'm back with the same question as yesterday :)
[09:56] <intelikey> me too
[09:56] <neusonce> !mp3
[09:56] <ubotu> For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats
[09:56] <Murlis> I'm trying to mount freebsd disk under ubuntu 7.04 without success...
[09:57] <intelikey> unix slices ?
[09:57] <Murlis> when I type fdisk -l
[09:58] <Murlis> I get /dev/sdb1 id a5 system FreeBSD
[09:58] <Jucato> what filesystem does freebsd use?
[09:58] <intelikey> ok sudo mount /dev/sdb1 /media
[09:58] <Murlis> I'm not sure, I think ufs2 ???
[09:58] <Murlis> how can I find that out?
[09:59] <vlt> Hello. I have installed Feisty and need to access an LVM volume. `lvmiopversion` return "0". How do I activate lvm?
[09:59] <ubuntu> i figured out i dont have  a mdadm config file
[09:59] <vlt> kernel is 2.6.20-16-generic
[09:59] <intelikey> file /dev/sdb1     might tell ya
[09:59] <vlt> kernel is 2.6.20-16-generic
[09:59] <Jucato> google says freebsd uses ufs
[09:59] <Murlis> wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or other error
[10:01] <Murlis> file /dev/sdb1 says block special (8/17)
[10:01] <intelikey> that is most piculear Murlis
[10:01] <Jucato> Murlis: have you loaded the UFS kernel module first?
[10:01] <intelikey> Murlis ufs should be auto in the mount command.
[10:01] <Jucato> sudo modprobe ufs
[10:02] <intelikey> Jucato well   good call   udev could be sleeping on the job
[10:02] <Jucato> Google's to be credited for this one :)
[10:02] <intelikey> udev is "supposed" to cover that for you...
[10:03] <Murlis> I'm not sure have I loaded ufs kernel module, how can I find out that?
[10:03] <Murlis> auto mount doesn't mount it
[10:03] <intelikey> sudo modprobe ufs
[10:03] <Jucato> )
[10:03] <Maxdamantus> "lsmod | grep ufs" possibly?
[10:03] <Jucato> "lsmod | grep ufs" to check if it's there
[10:04] <Jucato> s/there/loaded
[10:04] <intelikey> sudo modprobe ufs     will check it too   :)
[10:04] <Murlis> intelikey modprobe ufs doesn't return any answer
[10:04] <intelikey> so now mount it'
[10:04] <Jucato> which means it just successfully loaded the module
[10:04] <Maxdamantus> It might not know how to auto mount it.
[10:04] <Maxdamantus> If file can detect it, it probably will.
[10:04] <Maxdamantus> Or else you might need mount -t ufs ...
 "lsmod | grep ufs > ufs 71940 0
[10:05] <Jucato> ok so the kernel module is loaded now
[10:05] <Jucato> now try to mount it again
[10:05] <Jucato> the bsd partition
[10:05] <Murlis> so I mount
[10:06] <Maxdamantus> If it doesn't work, try adding "-t ufs" as a parameter for mount.
[10:06] <intelikey> [ 2b -o ! 2b ] 
[10:06] <Murlis> sudo mount -t ufs /dev/sdb1 /mnt
[10:06] <Maxdamantus> intelikey, -o?
[10:06] <neusonce> HAHHAAH , my mate just sent me an email of free BSD running on his xbox
[10:06] <intelikey> Maxdamantus yes.
[10:06] <Maxdamantus> (b[0,2] )?
[10:07] <Jucato> intelikey: to be or not to be? O.o
[10:07] <intelikey> Maxdamantus that's a quote from bill shakespear
[10:07] <Jucato> heh got it right :P
[10:07] <Maxdamantus> intelikey, I know.
[10:07] <Maxdamantus> But what's the -o from?
[10:07] <intelikey> Jucato what about   [ ]    ?
[10:07] <Maxdamantus> I heard of (b[0,2] )? or something.
[10:07] <Jucato> dunno bash... :P
[10:07] <neusonce>  he has alot of spare time :(
[10:07] <intelikey> Maxdamantus man bash  /-o
[10:07] <Jucato> ( 2b || !2b )
[10:08] <intelikey> heh that's what you said.
[10:08] <Maxdamantus> (2b)?
[10:08] <Maxdamantus> ^^ Standard regex
[10:09] <intelikey> Maxdamantus  [ this -a that ] 
[10:09] <Murlis> and I get eror wrong fs type, bad option bad superblock on dev/sdb1
[10:09] <intelikey> Maxdamantus  [ this -o that ] 
[10:10] <intelikey> same as   [ this ]  && [ that ]        next one   [ this ]  || [ that ] 
[10:10] <vlt> Hello. I have installed Kubuntu Feisty and need to access an LVM volume. `lvmiopversion` return "0". How do I activate lvm?
[10:10] <Maxdamantus> Ah.
[10:10] <Maxdamantus> I like the && ||
[10:10] <Murlis> and dmesg | tail says: ufs was compiled with read only support, can't be mounted as write
[10:10] <vlt> I've just installed lvm2. Do I need a reboot after that?
[10:11] <Jucato> !lvm
[10:11] <ubotu> Tips and tricks for RAID and LVM can be found on https://help.ubuntu.com/community/RaidConfigurationHowto and http://www.tldp.org/HOWTO/LVM-HOWTO
[10:12] <intelikey> Maxdamantus yeah but they make for impossable syntax when the test is long,    [ -z "$1" -o -f "./blah" ]  && [ -z "$2" -o -d ./dir/ ]  && do something
[10:13] <neusonce> !mp3
[10:13] <ubotu> For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats
[10:14] <Murlis> any ideas whats wrong with that freebsd ufs?
[10:15] <intelikey> Murlis try adding -o ro
[10:15] <Murlis> in any particular place?
[10:15] <intelikey> no
[10:15] <Jucato> is it ufs1 or ufs2?
[10:16] <intelikey> prolly ufs2
[10:16] <Jucato> this is from a Gentoo guide, see the mounting section: http://forums.gentoo.org/viewtopic-t-209074.html
[10:16] <Jucato> you need -o ufstype=
[10:16] <Murlis> the same error and dmesg says ufs_read_super: bad magic number
[10:17] <Murlis> I had installed latest freebsd, but I'm not sure what file system I chose, the disk contains only data, not freebsd itself
[10:19] <intelikey> man mount   /mount options for ufs       note the '44bsd' section
[10:19] <Murlis> Jucato ufstype and what?
[10:19] <Jucato> see the link I gave above
[10:19] <Murlis> itried 44bsd, 5xbsd ufs2 and the same
[10:21] <intelikey> well i guess you'll just have to ask in a "unix" channel
[10:21] <intelikey> linux is not unix
[10:22] <Jucato> ##linux or maybe #freebsd or something
[10:22] <waylandbill> Murlis: boot a freebsd live cd and you'll be able to mount it.
[10:23] <intelikey> @@bsd
[10:23] <neusonce> !libdvdcss
[10:23] <ubotu> For playing DVD, see http://help.ubuntu.com/ubuntu/desktopguide/C/video.html - "libdvdcss2" can be found at http://wiki.ubuntu.com/SeveasPackages - Try k9copy (available in !Universe) for backing up DVDs
[10:25] <intelikey> solid_liq: somebody tell me; how to add a route or what ever i need, so that 192.168.1.3 can connect to the world, through 192.168.0.2 then through 192.168.0.1    ???
[10:26] <intelikey> so somebody tell me; how to add a route or what ever i need, so that 192.168.1.3 can connect to the world, through 192.168.0.2 then through 192.168.0.1    ???
[10:26] <intelikey> stupid nick completion.        solid_liq already helped me some.
[10:26] <c1|freaky> hi all. what is a good desktop search program? some program that indexes my files an di can easily search for something im looking for?
[10:27] <intelikey> find
[10:27] <Jucato> locate/slocate?
[10:27] <c1|freaky> no i mean desktop search
[10:27] <Jucato> intelikey: except it doesn't index?
[10:27] <Neil3> c1|freaky: strigi
[10:27] <Jucato> locate:/foo in Konqueror makes it an easy desktop search hehehe
[10:27] <c1|freaky> the strigi daemon keeps crashing
[10:28] <Jucato> yeah you could try strigi (w/c will be installed by default in gutsy)
[10:28] <Neil3> beagle then if you dont mind the gnome deps
[10:28] <Jucato> kerry+beagle if you must
[10:28] <Neil3> aye
     find finds everything i need to find
[10:29] <Jucato> not everone's as intelikey as you :P
[10:30] <intelikey> find:/foo/ -iname blah      work in konq ?
[10:30] <Jucato> Ctrl+F does. with the added convenience of grep and other find options too many to remember :)
[10:32] <intelikey> what's that network grep thingy ?
[10:32] <Jucato> dunno
[10:32] <intelikey> ngrep
[10:33] <nitesh> !phone support
[10:33] <ubotu> Sorry, I don't know anything about phone support - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[10:33] <nitesh> !motoming support
[10:33] <Jucato> nitesh: try searching the forums
[10:34] <nitesh> thanks jucato
[10:35] <Jucato> hmm... motoming? A1200?? I wanted that phone a few months ago...
[10:35] <Jucato> aaah.. slight fever.... heading for bed..
[10:36] <ubuntu> woohoo i had like 3 gbs saved for swap
[10:36] <c1|freaky> ok thx
[10:36] <ubuntu> ill just repartition it for root lol
[10:36] <ubuntu> hey how would i got about removing all the other system files from my old partition?
[10:41] <vlt> Hello. How can I open an item in -system settings- w/o mouse?
[10:42] <intelikey> tab key  highlight  space bar   ?
[10:43] <_4strO> arrow
[10:43] <_4strO> alt + F2
[10:51] <vlt> intelikey: tab kez, space bar  doesn|t work
[10:51] <vlt> *sorrz trz to set kb to de
[10:52] <vlt> *sorrY
[10:52] <vlt> Any other ideas?
[10:55] <intelikey> vlt if the arrow keys and the enter key   or the tab key plus the space bar won't get you there,   then no i'm void of sujestions.
[10:56] <vlt> intelikey: Any other way to set kb to DE for konsole (on vt1...6 it works)
[10:57] <dranas> yeah
[10:57] <dranas> im back
[10:57] <dranas> i was the ubuntu character
[10:58] <dranas> i used that huge partition i had for swap and made it my new /  partition
[10:58] <intelikey> vlt drop to a console and edit /etc/X11/xorg.conf   maybe.    but i'm not sure kde honers xorg settings
[10:58] <dranas> now i just gotta.....redo all my stuff again
[10:58] <dranas> oi vey
[10:58] <dranas> upgradeing from dapper to fiesty.....ahhhhhhh
[10:58] <dranas> i hate you raid
[10:59] <dranas> mdadm ahhhh
[10:59] <dranas> im ok now....serious....
[10:59] <intelikey> dranas glad to hear it
[10:59] <dranas> i saved all my music and pictures so im not so mad, and i think i have a better set up now
[10:59] <dranas> did need  3 gb swap
[11:00] <ubuntu> sziasztok vannak itt magyarok<
[11:00] <dranas> didnt*
[11:00] <dranas> well good night everyone thanks for all your help.
[11:01] <drif> intelikey: had wierd one couple of hours ago - usb got jammed and even boot didn't help - no keyb&mouse connect..then I ran memtest on boot menu and found out mad memory 1024 onwards..removed that chip and voila usb came back alive... :-\
[11:01] <drif> mad=bad
[11:02] <drif> intelikey: had to attach ps/2 key to even select memtest..
[11:03] <intelikey> hmmm volital ram not dumping it's data on reboot,   that is odd.
[11:04] <drif> intelikey: and I mean cold boot - power off as well - many times
[11:04] <drif> intelikey: usb was just out
[11:04] <intelikey> is  192.168.0.1/24   the same as  192.168.255.255 ?
[11:05] <intelikey> or better yet what would you write for address range from 192.168.0.0 to 192.168.255.255  ?
[11:06] <intelikey> i want ssh to listen on anything 192.168.*.*
[11:06] <llutz> intelikey: 192.168.0.0/16
[11:06] <_4strO> !java
[11:06] <ubotu> To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository. Enable the backports repository on Edgy to install sun-java6-jre. Please don't use Adept to install Java if you are on Kubuntu 6.10 (Edgy) or earlier.
[11:06] <intelikey> can i use * in sshd_conf  ?
[11:07] <llutz> intelikey: 192.168.0.0/24 = 192.168.0.1 - .1.255
[11:07] <ubuntu> $java
[11:07] <llutz> intelikey: 192.168.0.0/24 = 192.168.0.1 - .0.254 sry
[11:07] <intelikey> llutz what is    192.168.*.*
[11:07] <llutz> intelikey: iirc 192.168.0.0/16
[11:08] <intelikey> ok.
[11:08] <llutz> intelikey: 192.168.0.0 netmask 255.255.0.0
[11:11] <intelikey> well /16 didn't work,   i can ssh in from 192.168.0.*  but not 192.168.1.*
[11:12] <drif> intelikey: isn't that upto network settings? just got up, might be sleep talking..
[11:13] <llutz> intelikey: odd, whith /16 range is 192.168.0.1 - 192.168.255.254, bradcast 192.168.255.255
[11:13] <intelikey> it's up to what sshd listens to
[11:14] <intelikey> but i'm not sure that's my issue.
[11:14] <drif> llutz: but does that matter if adapter has different submask than in sshd config?
[11:14] <intelikey> i think ssh public key may be my issue
[11:14] <llutz> drif: sure, your network has to listen in that 16-subnet
[11:15] <drif> llutz: yup, I asked just because I'm not sure how intelikey has configured his network yet
[11:15] <llutz> intelikey: why do you need 65k-clients? ;)
[11:15] <yeniklasorr> What is difference between compiling a source and a binary code ?
[11:16] <intelikey> llutz i'm agreed with you.  the address is correct.  i'm thinking ssh is being strict because the box is behind another box now and the publick key and known host don't match anymore
[11:16] <SlimeyPete> you don't have to compile a binary, yeniklasorr. It's already been compiled.
[11:16] <intelikey> llutz i don't i just don't want the address range limited within the dmz
[11:16] <drif> intelikey: so you've got /16 submask on your interface then?
[11:17] <llutz> intelikey: yeah, but all your network has to be set up with /16 then
[11:17] <llutz> intelikey: otherwise the routeing will fail
[11:17] <intelikey> llutz ?
[11:17] <drif> intelikey: 255.255.0.0
[11:18] <llutz> intelikey: if you have clients in 192.168.1.0 with /24 net, they cannot route to 192.168.0.1
[11:18] <intelikey> hmmm
[11:18] <llutz> intelikey: so all your network has to be in the same subnet or you need special routers/gateways
[11:19] <drif> intelikey: just set your interface submask to 255.255.0.0 that should do it
[11:19] <mauri> Hello
[11:19] <mauri> can somebody help me, please?
[11:20] <yeniklasorr> SlimeyPete : A binary con't need ./configure and make? How can I install it ?
[11:20] <intelikey> llutz you lost me.
[11:21] <intelikey> and drif interface submask ?
[11:21] <drif> intelikey: yes..simply with ifconfig like you used to?
[11:21] <drif> ifconfig output: Mask: 255.255.255.0 (I believe is your current setting)
[11:22] <mauri> help?
[11:22] <llutz> !ask | mauri
[11:22] <ubotu> mauri: Don't ask to ask a question. Just ask your question :)
[11:22] <drif> mauri: we can't help you without knowing what's wrong
[11:22] <SlimeyPete> yeniklasorr: you install it via a .deb package, or by running an install script
[11:22] <SlimeyPete> depending upon which is available
[11:22] <mauri> eheh right, i can't manage to install kubuntu, currently i am on the live cd
[11:23] <intelikey> drif you may have found my problem
[11:23] <mauri> i tried to install it on a usb sda
[11:23] <drif> intelikey: I tried to tell you in quite early stage.. ;)
[11:23] <intelikey> so if i set the submask to 255.255.0.0  i can use anything in the  192.168. range ?
[11:23] <drif> intelikey: directive is netmask in ifconfig
[11:23] <drif> yes
[11:24] <mauri> the sda is partitioned as it follow: sda1 is fat32, sda2 is ext3 (root), sda3 is ext3 (home), sda4 is swap
[11:25] <mauri> while trying to boot it shows
[11:25] <mauri> grub error 17
[11:26] <mauri> i googled grub error 17
[11:27] <mauri> but didn't understand anything about it
[11:27] <mauri> i don't know what to do : \
[11:28] <drif> mauri: that's quite usual grub error around here
[11:28] <drif> mauri: you've just installed to kubuntu and should be first time booting into system?
[11:29] <mauri> yes
[11:29] <drif> -to
[11:30] <drif> mauri: http://ubuntuforums.org/showthread.php?t=442945 <- that's one possible solution
[11:31] <drif> mauri: also read this http://ubuntuforums.org/archive/index.php/t-1669.html
[11:31] <mauri> drif: i tried but unfortunately my bios does not support that
[11:32] <drif> mauri: you could talk a bit more about your hardware setup there..
[11:32] <mauri> oh right, what do you want to know?
[11:33] <drif> mauri: the more input you give (supposedly) easier it's to help
[11:33] <mauri> i just tried the fdisk -l thing
[11:33] <drif> mauri: do you have any other operating systems on your comp?
[11:33] <mauri> win xp on the notebook hard drive
[11:34] <drif> mauri: on kubuntu on what?
[11:34] <mauri> i installed kubuntu on a usb hard drive
[11:34] <mauri> Disk /dev/hda: 40.0 GB, 40007761920 bytes
[11:34] <mauri> 240 heads, 63 sectors/track, 5168 cylinders
[11:34] <yeniklasorr> When compiling a source is it possible to look first its dependencies
[11:34] <mauri> Units = cylinders of 15120 * 512 = 7741440 bytes
[11:35] <mauri>    Device Boot      Start         End      Blocks   Id  System
[11:35] <mauri> /dev/hda1   *           1        5167    39062488+   7  HPFS/NTFS
[11:35] <mauri> Disk /dev/sda: 320.0 GB, 320072933376 bytes
[11:35] <mauri> 255 heads, 63 sectors/track, 38913 cylinders
[11:35] <mauri> Units = cylinders of 16065 * 512 = 8225280 bytes
[11:35] <mauri>    Device Boot      Start         End      Blocks   Id  System
[11:35] <mauri> /dev/sda1   *           1       27298   219271153+   c  W95 FAT32 (LBA)
[11:35] <mauri> /dev/sda2           31081       38913    62918572+  83  Linux
[11:35] <mauri> /dev/sda3           28461       31080    21045150   83  Linux
[11:35] <mauri> /dev/sda4           28265       28460     1574370   82  Linux swap / Solaris
[11:35] <mauri> this is the result of sudo fdisk -l
[11:35] <Tm_T> mauri: stop flooding
[11:35] <Tm_T> !paste | mauri
[11:35] <ubotu> mauri: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (be sure to give the URL of your paste - see also the #kubuntu channel topic)
[11:35] <mauri> ops, i'm sorry
[11:37] <deni__> hello everyone
[11:37] <intelikey> nope something is still screwy
[11:37] <intelikey> mauri /boot/grub/devices.map  has wrong addressing or /boot/grub/menu.lst  has wrong  (hd#,#)
[11:37] <intelikey> i can ping 192.168.0.1  form  192.168.1.3   the box 192.168.1/2.2 is between them   so the signal is passing through the box  but something is forbiding ssh connection  or ping beyond  192.168.0.1 (=the world)
[11:37] <deni__> does anybody have experience in setting up raid and ubuntu together?
[11:37] <intelikey> iptables -L is blank on  192.168.0/1.2
[11:37] <intelikey> errr ooops   1/2 up there should be  0/1
[11:37] <intelikey> and everything is submask'd  255.255.0.0 now
[11:37] <intelikey> oh btw i could ping 192.168.0.1 from 192.168.1.3 before i changed the submask/netmask  also.
[11:42] <intelikey> mauri pastebin your devices.map and menu.lst please
[11:42] <mauri> yes
[11:42] <jupit3r> ciao
[11:42] <mauri> ciao
[11:42] <jupit3r> qualche italiano?
[11:42] <mauri> io
[11:42] <intelikey> !it | jupit3r
[11:42] <ubotu> jupit3r: Vai su #ubuntu-it o su #kubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie!
[11:43] <jupit3r> mauri mi puoi aiutare?
[11:43] <jupit3r> ok grazie
[11:43] <mauri> this is my menu.lst http://paste.ubuntu-nl.org/35517/
[11:43] <deni__> does anybody have experience in setting up raid and ubuntu together?
[11:44] <intelikey> mauri ok.
[11:44] <mauri> this is my device.map
[11:44] <toxic316> hay any one know how to setup linksys usb wireless cards
[11:44] <mauri> (hd0) /dev/sda
[11:44] <intelikey> mauri ok.
[11:44] <mauri> it's just a line..
[11:45] <intelikey> and you bios supports booting from usb ?
[11:45] <mauri> yes
[11:45] <intelikey> hmmm.
[11:46] <mauri> i'm changing (hd0) to (hd1) in device.map
[11:46] <intelikey> mauri what's on the vfat partition ?
[11:47] <mauri> just datas
[11:47] <intelikey> mauri try setting the second partition to bootable also
[11:47] <mauri> what do you mean?
[11:47] <intelikey> rather than the first
[11:48] <drif> mauri: what does that first partition contain?
[11:48] <drif> mauri: on usb-drive
[11:48] <intelikey> he just said data
[11:48] <mauri> sda1 just datas
[11:48] <drif> oh
[11:48] <mauri> no os
[11:48] <drif> then fdisk and change second to bootable like intelikey said
[11:49] <intelikey> sudo cfdisk /dev/sda
[11:50] <mauri> ooooooooh
[11:50] <mauri> i can see the problem now
[11:50] <mauri> the fat32 was set as the boot partition
[11:51] <intelikey> if boot from usb device is enabled in the bios and the addressing is correct, (which it seems to be) the boot flag "should not matter" but you never know with grub.   grub is week through bios
[11:51] <toxic316> any one know how to open zip in ubuntu
[11:52] <drif> toxic316: Ark can handle it
[11:52] <mauri> i changed the boot flag, how do i save and exit?
[11:52] <intelikey> toxic316 ark
[11:52] <elbing> toxic316 unzip
[11:52] <toxic316> ok thanks
[11:52] <intelikey> mauri write to disk
[11:52] <intelikey> then quit
[11:52] <toxic316> well drif you still getting the linksys usb card if so im trying this walk though http://ubuntuforums.org/showthread.php?t=534865&highlight=wusb54gc
[11:52] <mauri> okay...
[11:53] <mauri> do i try to reboot now?
[11:53] <drif> yup
[11:53] <mauri> thanks
[11:53] <mauri> be right back :D!
[11:53] <intelikey> yeah and if it doesn't fly  try installing grub on your hda
[11:54] <mauri> okay
[11:54] <intelikey> you can have your kernel in ntfs space
[11:54] <mauri> really?!
[11:55] <intelikey> it's the only way grub can even be installed on one of my boxes,  i have one partition among 4 boxes
[11:55] <intelikey> and grub requires a partition or a floppy.
[11:55] <mauri> :| weird
[11:56] <intelikey> not really   grub only "manipulates" bios.   it doesn't actually take over the system like lilo
[11:56] <mauri> manipulates?!
[11:57] <intelikey> grub should properly be term'd an extremely small os
[11:57] <intelikey> rather than a boot loader
[11:57] <intelikey> lilo is a boot loader
[11:58] <mauri> yep
[11:58] <mauri> grub is a light boot loader..?
[11:58] <intelikey> grub is an OS
[11:58] <mauri> :O
[11:59] <llutz> so grub + emacs is all you need for almost everthing :)
[11:59] <intelikey> within that os you can load files into the system ram,  thus affectively starting another OS
[11:59] <intelikey> llutz if you like M$-DOS 1.1  yep
[11:59] <mauri> it's like a "servant os", isn'it?
[12:00] <intelikey> yes
[12:00] <mauri> got it!
[12:00] <mauri> :D
[12:01] <drif> mauri: works now?
[12:01] <mauri> i dont know
[12:01] <mauri> i'll reboot now
[12:01] <drif> not booted yet?
[12:01] <drif> ok
[12:01] <mauri> eheh no
[12:01] <intelikey> irc was too exciting to test it
[12:01] <mauri> :D
[12:01] <drif> I thought you had two comps there ;)
[12:01] <mauri> bye
[12:02] <mauri> be right back
[12:02] <mauri> thanks :)
[12:02] <intelikey> oh my.   i'm late on my rounds.
[12:11] <timtom> hi, I have a quick question
[12:12] <timtom> I'v installed wireless lan on Kubuntu (via ndiswrapper). its definitly working, has IP, pings google, and indeed is carrying this message, however konqueror and most other KDE aps dont seem to see it
[12:13] <timtom> I was previusly connected via an ethernet card, and I presume they are still trying to use that. the ethernet card is disabled and disconnected.
[12:13] <timtom> any sugestions?
[12:14] <aivalli> hi folks
[12:15] <aivalli> I have an errorwith mysql on kubuntu
[12:15] <aivalli> please read http://pastebin.com/d30a767ee
[12:15] <aivalli> I have tried force removal and reinstallation
[12:15] <aivalli> any hints ?
[12:16] <neusonce> hit the machine at the back neer the fan
[12:16] <neusonce> always works for me
[12:17] <neusonce> !dvd
[12:17] <ubotu> For playing DVD, see http://help.ubuntu.com/ubuntu/desktopguide/C/video.html - "libdvdcss2" can be found at http://wiki.ubuntu.com/SeveasPackages - Try k9copy (available in !Universe) for backing up DVDs
[12:17] <Feudster> Hello  anybody familiar with dual booting xp and ubuntu on seperate hard drives?
[12:18] <timtom> install XP first, ubuntu will (probably) autdetect it, otherwise edit grub conf
[12:18] <Feudster> does this work on seperate drives
[12:19] <timtom> yeah, but you may have to edit the config yourself. you got a dual boot on single drive system there?
[12:19] <timtom> cos if you or somebody else does we could copy their grub conf and just change the drive
[12:20] <timtom> ok, in /boot/grub
[12:21] <neusonce> ggrrrrrrrrrr i just installed  libdvdread3 package and  i cant get it to activate in the cmd terminal
[12:21] <timtom> feudster: there is a file called menu.lst which you need to edit. it contains all the instructions
[12:22] <timtom> but you will also need to edit device.map, and make sure bios boots the linux drive.
[12:22] <neusonce> im an idiot
[12:23] <neusonce> damm computer messing with my head
[12:23] <mauri> timtom~ how do i edit those files? it says `no write permission for file /boot/grub/menu.lst`
[12:23] <timtom> you need to be root, sudo su
[12:23] <timtom> but er, be careful
[12:23] <timtom> those are the files that will really screw up an install
[12:24] <timtom> if your going to do this dont have anything of value on that computer
[12:24] <mauri> yep
[12:24] <mauri> i have error 17 with grub
[12:25] <timtom> another useful one is to have a bootdisk like puppy linux, and just use that if you do something wrong. have a copy of your old menu.lst somewhere
[12:25] <timtom> gtg
[12:30] <Ben_Cs> hello
[12:30] <Ben_Cs> does konversation support utf-8 encoding?
[12:31] <pc20> gn
[12:33] <pc20> bbg
[12:33] <Jucato> Ben_Cs: yes. in fact it is the default as far as I know
[12:34] <mauri> does somebody know how to edit menu.lst and device.map in livecd mode?
[12:36] <dotz> hi i've just upgraded from edgy to fiesty :), why is it that stuffs i put in rc.local doesn't load now? it was loading in edgy
[12:37] <Ben_Cs> Jucato: i'm in a hebrew room and i see jibrish...
[12:38] <Jucato> perhaps you need fonts. if you right-click on the channel name at the channel list, you can select the encoding. you'd see the default is utf8
[12:43] <ubuntu> hi
[12:47] <deviance> This isn't really a linux question, but can i have one IDE hard drive and one sata hard drive on that same pc?
[12:49] <Ben_Cs> ok thanks. you're right
[12:51] <jason__10> Goood afternooon sir, I am calling from your bank...
[12:52] <Jucato> ?
[12:55] <emilsedgh> will kubuntu gutsy include the Restricted Manager?anyone knows?
[12:55] <Jucato> afaik, yes
[12:56] <emilsedgh> is it even coded?or there are just plans for it?
[12:57] <Jucato> emilsedgh: https://wiki.kubuntu.org/GutsyGibbon/Tribe4/Kubuntu#head-0efdc1f98d7fd27716478be21036c0ed5d10d778
[12:58] <emilsedgh> thanks Jucato
[12:58] <Jucato> so yes, it's already coded and already there
[12:58] <Jucato> even the kubuntu-restricted-extras (for media formats)
[01:00] <neusonce> why dose  kkubuntu work best unupdated
[01:00] <neusonce> why dose  kkubuntu work best unupdated
[01:00] <neusonce> grrrrrrrrrr
[01:01] <jason__10> neusonce:  that doesn't really make sense to me
[01:01] <neusonce> nor to me
[01:02] <jason__10> talk to me... sudo apt-get install -f    im making a small blog.. what would you try if this command doesn't work to fix Adept
[01:02] <neusonce>  but iv had less issues with a fresh install , than iv had with updating it
[01:04] <jason__10> sounds like just bad administration
[01:04] <jason__10> mine is the best ;)
[01:08] <please> hello, is anyone there?
[01:09] <jason__10> please:  hello mate
[01:11] <jason__10> http://jayskubuntu.blogspot.com/
[01:11] <emilsedgh> please: as you can see there are many people here...
[01:12] <yeniklasorr> kdetv with tv tuner card error "Unable to grab video. Video display is not possible with the current plugin configuration. Try playing with the configuration options of the V4L plugin." What is problem ?
[01:13] <jason__10> yeniklasorr:  look throught the config to see if there are any other output or input setting
[01:14] <yeniklasorr> jason__10 : For my tv tuner card, there is 2 option. "video 4 linux" and "video 4 linux 2"
[01:14] <jason__10> have you had it working before?
[01:15] <jason__10> try them both
[01:17] <please> sorry,
[01:17] <please> im having a little trouble with a partition
[01:17] <please> it appears that it has some how corrupted and the files on it cannot be accessed by browsers
[01:18] <please> anyway tocopy the files to a partition that is not corrupted?
[01:18] <jason__10> please:  are you sure its mounted properly, what file system is it
[01:18] <please> ext3 and i have had no trouble with it before
[01:18] <please> it is also my root drive
[01:18] <please> however linux still works
[01:19] <yeniklasorr> jason__10 : tried both and gave me same errors.
[01:19] <jason__10> hmm please What have you done recently?
[01:19] <jason__10> yeniklasorr:  maybe you don't have the driver for the tv card.
[01:19] <please> nothing, it is just occured
[01:19] <please> randomly
[01:20] <jason__10> please are you sure you didn't change any permissions or anything?
[01:20] <please> yes
[01:21] <jason__10> please, have a look at my website http://www.stimulus.newsit.es
[01:21] <yeniklasorr> jason__10 : it is bt878, i think it is coming with kernel
[01:21] <Xplicit> how do i connect a phone
[01:21] <jason__10> yeniklasorr:  hmm, maybe you should download a different TV tuner program just to test it
[01:22] <Xplicit> how do i connect a phone via bluetooth, it asks for a pin but i dont get a popup to enter it in kubuntu
[01:22] <please> that website does not help
[01:23] <jason__10> please I know... but I can have a look remotely if you want.
[01:24] <please> it freezes when i try and access the partition
[01:24] <jason__10> hmmm
[01:24] <jason__10> could it be a physical problem?
[01:25] <please> i do not think so, the actual whole hdd works
[01:25] <please> its just this partition.
[01:25] <jason__10> have you tried chkdisk
[01:25] <please> no
[01:26] <please> what is chkdisk?
[01:26] <jason__10> sorry chkdsk
[01:26] <jason__10> run it as root, #chkdsk /dev/hardiskdevicename
[01:27] <jason__10> im sorry in linux its #fsck
[01:28] <jason__10> please:  linux isn't supposed to do this, im wandering what caused it
[01:29] <uakkeri> is there a ssh file transfer application in/for kde?
[01:29] <jason__10> uakkeri:  im sure
[01:29] <jason__10> have you searched google?
[01:29] <emilsedgh> kubuntu should work a little on its kde's artwork.why not using another icon theme?or a better win decoration?and kicker looks bad.at least I think so...
[01:30] <_4strO> !ssh
[01:30] <ubotu> SSH is the Secure SHell protocol. See https://help.ubuntu.com/community/SSHHowto for usage. Putty is a nice SSH client for Windows; it can be found at http://www.chiark.greenend.org.uk/~sgtatham/putty/
[01:30] <emilsedgh> uakkeri: type fish://user@host in konqueror
[01:30] <uakkeri> yes but it's not availaple in ada
[01:30] <uakkeri> ept
[01:30] <jason__10> http://www.kde-apps.org/content/show.php?content=37287
[01:30] <emilsedgh> uakkeri: or go to remote:/ and create a new network folder
[01:31] <uakkeri> emilsedgh: i'll try... thnx
[01:31] <uakkeri> emilsedgh: konqueror seems to be quite a wonderful application
[01:32] <emilsedgh> uakkeri: well, thats the power of KIO Slaves of KDE, you could try fish:/, ftp:/ or any other KIO Slave in any KDE Application.you could find the list in kinfocenter
[01:34] <please> it says that fsck can cause filesystem damage
[01:34] <uakkeri> ubotu:thnx... i got that bookmarked finally :)
[01:35] <please> hello?
[01:36] <jason__10> please: erm, well its because you are running the system
[01:36] <please> will it?
[01:38] <powerbook> i install the 7.10 gutsy,but i found that i cannt install the decodes,who can do me a favor?PLZ,thx
[01:39] <alejandro> hi
[01:39] <alejandro> why i cant listen mp3 or movies?
[01:39] <powerbook> Cuz U havent install the decodes
[01:39] <alejandro> i have kubuntu 7.04
[01:40] <alejandro> howto intall codecs
[01:40] <please> will it damage?
[01:40] <jason__10> please:  I cant say yes or no, but it sousnd damaged
[01:41] <please> ok i took the risk
[01:41] <please> it said it is clean
[01:41] <emilsedgh> alejandro: read the kubuntu's faq
[01:42] <powerbook> did u modified ur sources.list? sudo apt-get install libdvdcss2 libdvdnav4 libdvdplay0 libdvdread3 w32codecs libxine-extracodecs gstreamer0.10-pitfdll gstreamer0.10-ffmpeg gstreamer0.10-plugins-bad gstreamer0.10-plugins-bad-multiverse gstreamer0.10-plugins-ugly gstreamer0.10-plugins-ugly-multiverse
[01:43] <jason__10> alejandro: please atleast try yourself before asking howto it does even tell you how to inmstall codes if you look
[01:43] <powerbook> it`s funny,i havent made it, becuz i install the 7.10 ubuntu,dont know what to do
[01:49] <brmassa> guys, when i add a MP3 on my palylist on amarok withoutmp3 support, the program shows a "install mp3 support" but it freezes.
[01:51] <alejandro> in the faq dont tell howto use mp3 with kubuntu 7.04
[01:52] <SlimeyPete> !mp3
[01:52] <ubotu> For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats
[01:52] <SlimeyPete> it's the same as ubuntu
[01:54] <please> i used chkdsk
[01:54] <please> it daid there are errors on the volume
[01:56] <seanpcrowe> any one know of a good app to make an image outta CDROM's ?
[01:58] <llutz> seanpcrowe: data-cd? cat, dd, k3b
[01:59] <jason__10> seanpcrowe:  K3B
[01:59] <owl> good morning
[02:00] <bombshelter13> Hey, where can I find the setting to change it to a Mac OS style menu bar in KDE 3.5.6?
[02:01] <emilsedgh> bombshelter13: 1min please
[02:02] <DexterF> hi
[02:02] <emilsedgh> bombshelter13: system settings->Desktop (look and feel category)->Behavior
[02:02] <seanpcrowe> i thought K3B could only burn images... not make them (i cant seem to find the option to do this)
[02:02] <DexterF> news reports canonical plans on a "build service"  - what exactly is that?
[02:03] <Jucato> where's the news? and probably something like SUSE's? but I don't know that either :)
[02:03] <Sanne> seanpcrowe: burn->writing->only create image
[02:04] <Sanne> seanpcrowe: then in the image tab choose output path and name
[02:04] <jason__10> click as if you were burning a cd
[02:05] <jason__10> and click the button "only create image!
[02:05] <Xplicit> how do i bind my phone to my computer bia bluetooth?
[02:05] <seanpcrowe> ah...
[02:05] <seanpcrowe> thanks Sanne, jason__10
[02:06] <Sanne> seanpcrowe: you're welcome :)
[02:06] <jason__10> seanpcrowe:  ok mate
[02:07] <alejandro> hi
[02:07] <alejandro> at installing ubuntu  restricted extras
[02:07] <alejandro> it returns an error
[02:14] <jason__10> http://jayskubuntu.blogspot.com/  Check out my kubuntu blog, it explains how to burn an ISO, modify the Kde menu and fix adept when it breaks.
[02:14] <mogi> hello, i have various additional packages installed on my kubuntu 6.06. will i lose them (or can i use them) if i upgrade to 7.04
[02:15] <mogi> ?
[02:16] <jason__10> mogi:  hmmm
[02:17] <jason__10> mogi: it should be possible if you do sudo apt-get distupgrade
[02:19] <mogi> jason__10: and can i sudo apt-get disupgrade from a cd???
[02:19] <DexterF> mogi: depends. how did you get/install those packages?
[02:19] <mogi> :-)  apt-gotten from net :-)
[02:20] <mogi> soo... the thing is i have to upgrade all my packages if i upgrade the distro?
[02:21] <DexterF> well, if those packages are from some third party repositories, they will still be there after a dist-upgrade, but mayhap they dont work afterwards
[02:22] <mogi> okay tnx alot
[02:22] <DexterF> and you can just add your cdrom to sources.list
[02:23] <jason__10> mogi:  you should be fine, if they dont work, just download the latest version of your packages and it should still keep all your config files etc
[02:32] <freeman> ???
[02:33] <freeman> 
[02:33] <jussi01> !cn
[02:33] <ubotu> For Ubuntu help in Chinese  #ubuntu-cn  #ubuntu-tw   #ubuntu-hk
[02:38] <freeman> 
[02:43] <DaleksUnited> !wifi
[02:43] <ubotu> Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs
[02:45] <jussi01> freeman: whats the problem?
[02:47] <genii> jussi01: Thanks :)
[02:47] <jussi01> :)
[02:50] <SpawnHCS> hi all
[02:52] <Xplicit>  how do i connect a phone via bluetooth, it asks for a pin but i dont get a popup to enter it in kubuntu
[02:53] <freeman> 
[02:55] <jussi01> Xplicit: which phone?
[02:56] <Xplicit> well its a motorola but everything works fine at that end its just kde that wont ask me for a pin
[02:58] <genii> Do you have kbluetooth installed?
[02:58] <Jucato> (should be installed by default)
[02:58] <Xplicit> yes
[02:59] <jussi01> Xplicit: have you tryed making a connection the other way?
[02:59] <genii> When KDE desktop comes up do you see at tope left a window that says "Bluetooth Device found"
[03:00] <genii> *top
[03:00] <Xplicit> ive tried going through knoqueror and using wammu(it uses some python stack to scan bluetooth)
[03:00] <Xplicit> nope i do when i start wammu
[03:10] <vit_> COMO INSTALO TIBIA EN MI COMPUTADORA LINUX UBUNTU
[03:10] <SlimeyPete> hmmm... is that spanish, or italian?
[03:11] <MasterKzuy> spanish
[03:11] <Jucato> !es
[03:11] <ubotu> Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[03:11] <MasterKzuy> como instalo tibia en mi compu
[03:15] <MasterKzuy> Since I install games in a pc linux ubuntu plix
[03:15] <MasterKzuy> Since I install games in a pc linux ubuntu plix
[03:16] <MasterKzuy> Since I install games in a pc linux ubuntu plix
[03:16] <MasterKzuy> Since I install games in a pc linux ubuntu plix
[03:16] <SlimeyPete> MasterKzuy: we can't understand you. This is an English-language channel. You should go to #kubuntu-es.
[03:16] <stdin> MasterKzuy: stop that
[03:16] <SlimeyPete> and stop spamming.
[03:18] <MasterKzuy> SINCE I INSTALL GAMES IN LINUX UBUNTU
[03:18] <MasterKzuy> SINCE I INSTALL GAMES IN LINUX UBUNTU
[03:18] <MasterKzuy> SINCE I INSTALL GAMES IN LINUX UBUNTU
[03:18] <genii> geez
[03:18] <genii> maybe "kaput"
[03:19] <owl> hrrrm. someone knows why i have no sound...?
[03:20] <_aaa> you may have to do what I did, turn up the volume to hear it...
[03:21] <owl> hehe, that's not the problem... i've volume 100 %... not muted... alsa has my driver...
[03:21] <owl> but... i don't hear anything
[03:21] <owl> yesterday it worked...
[03:21] <owl> but one night later and a reboot later...
[03:22] <_aaa> double click on volume icon and make sure all is on, that's all I know...
[03:23] <_aaa> well, owl?
[03:23] <owl> *sigh* thx. that's what i was doing since a long time... :/
[03:23] <owl> even alsa is not muted
[03:23] <owl> soundserver restarted...
[03:23] <owl> laptop restarted...
[03:24] <_aaa> and are you sure all the update packages are tweaked on?
[03:25] <_aaa> I have to go away, have a nice day...
[03:27] <aguitel> anyone know how restart beryl with deffault settings ?
[03:27] <stdin> (re)move ~/.beryl/settings
[03:36] <rignes_> Wow...coming from Slackware to Kubuntu is a shock.  I'm not used to the differences.
[03:37] <anon32> stabs*
[03:42] <genius> ayuda
[03:42] <genius> alguien sabe como instalar msn en mi kubuntu
[03:43] <Jucato> hm... spanish or portuguese...
[03:44] <pag> I'd guess Spanish :)
[03:44] <pag> !es | genius
[03:44] <ubotu> genius: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[03:44] <Jucato> I'm always confused...
[03:45] <genius> ok gracias
[03:45] <pag> Jucato, So am I... I just think that Spanish is more wide-spread -> it's more frequent :)
[03:46] <Jucato> I thought so too... until I mistook portuguese for spanish more than thrice in here :P
[03:47] <bauer_> on my old suse box i had a program called xml which i liked to beautify xml files to make them readable in vi. Is there such a program on ubuntu ?
[03:48] <yeniklasorr> Is there a way to find last installed packages ?
[03:48] <Jucato> yeniklasorr: in /var/log/dpkg.log (older logs would be named dpkg.0.log etc)
[03:49] <thingy> yeniklasorr: if you use aptitude there's a log file in /var/log umm dpkg might also be creating a log file
[03:50] <yeniklasorr> ok thank you
[03:51] <rignes> I want to understand the start up sequence of Kubuntu.  I understand it uses UpStart vs the traditional inittab?  Anyone know of a good doc I could read that explains it in plain terms?
[03:52] <Jucato> !upstart
[03:52] <ubotu> Upstart is meant to replace the old Sys V Init system with an event-driven init model.  For more information please see: http://upstart.ubuntu.com/
[03:53] <rignes> Thanks, I'll check it out.  I'm still getting used to the Kubuntu way of doing things...I've only ever run Slackware and haven't experimented with other distros much.
[03:54] <MetaBookfoziS> Hi all, how can i detect my sata drives?
[03:54] <MetaBookfoziS> i have bought a new sata drive, and i only have normal ide drives before.
[03:55] <Frederick> folks does anyone here know wich package I can use to fix this -> http://rafb.net/p/zf6V2z92.html?
[03:55] <MetaBookfoziS> !sata
[03:55] <ubotu> Sorry, I don't know anything about sata - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[03:55] <thingy> MetaBookfoziS: Standard kernel has a lot of sata controller support built in. Your drive should be detected automatically.
[03:55] <MetaBookfoziS> i have VIA VT6420 SATA RAID controller
[03:56] <MetaBookfoziS> And it isn't detetcted automatically.
[03:56] <MetaBookfoziS> It's feisty
[03:57] <MetaBookfoziS> i also can't get to know how it's named in /dev
[03:58] <thingy> MetaBookfoziS: That isn't a new controller...I can see hits on google dating as far back as 2005 for the controller. What exactly are your symptoms?
[03:58] <MetaBookfoziS> Nothing:)
[03:58] <MetaBookfoziS> I fire up gparted
[03:58] <MetaBookfoziS> and that's also see only my old two drives
[03:59] <MetaBookfoziS> the same with fdisk -l
[03:59] <MetaBookfoziS> i didn't have any sata drives before, i don't know where i needed to start
[03:59] <Frederick> Updating latext borked my whole latex and kyle previous packages can anyone please help me?
[03:59] <thingy> MetaBookfoziS: Is the sata drive showing up in the bios? or on the POST messages during start up?
[04:00] <MetaBookfoziS> Yes it's shows up, and it sees it only 257gb (it's 500gb)
[04:00] <MetaBookfoziS> but no option available in my bios for setting up that...
[04:00] <thingy> MetaBookfoziS: well thats something very wrong there then
[04:00] <thingy> MetaBookfoziS: you said its a raid controller?
[04:00] <MetaBookfoziS> how it's "/dev/xxx" should be named?
[04:01] <N|cko> hello, i have my mp3 player connected to kubuntu and it says there is no more space left
[04:01] <N|cko> however, there is 14gb available, and it says only 4gb is in use under properties
[04:01] <MetaBookfoziS> thingy > http://paste.ubuntu-nl.org/35549/
[04:01] <N|cko> any ideas on how to fix this problem?
[04:01] <thingy> MetaBookfoziS: is there a key during startup that you can press to access the hardware raid setup menu?
[04:01] <MetaBookfoziS> here's my lspci
[04:02] <yeniklasorr> is freeglut3 package default ?
[04:02] <MetaBookfoziS> For raid setup yes, but i didn't want raid (and i haven't got enough disks for it)
[04:02] <genii> bot attack in #ubuntu
[04:02] <MetaBookfoziS> ^^ as that window says
[04:02] <thingy> MetaBookfoziS: sata disks will appear as std. scsi drives in linux...e.g. sda/sdb/sdc etc sd[a-z
[04:02] <thingy> ] 
[04:02] <MetaBookfoziS> And in that window no any available otpion except escape
[04:02] <ksivaji> genii hi
[04:03] <thingy> MetaBookfoziS: well if its a 500gb drive, you need to find out why bios is only seeing it as ~ 250gb drive before you do anything in linux
[04:03] <MetaBookfoziS> Linux isn't uses bios for it, as i heard
[04:04] <MetaBookfoziS> I don't think one of these (http://paste.ubuntu-nl.org/35550/) are my disk... true?
[04:04] <toxic316> so any one know ?
[04:05] <thingy> MetaBookfoziS: your sata contoller is in that list...you can't see hard drives via lspci!!! do a dmesg | grep sd[a-z
[04:05] <thingy> ] 
[04:05] <genii> ksivaji: Hi :)
[04:06] <MetaBookfoziS> that's just ls /dev
[04:06] <MetaBookfoziS> but i try dmesg
[04:07] <MetaBookfoziS> Nothing found for sd[a-z] 
[04:07] <MetaBookfoziS> but for sata: http://paste.ubuntu-nl.org/35551/
[04:08] <MetaBookfoziS> the sata link down line is intresting
[04:08] <thingy> MetaBookfoziS: look at lines 15 and 16, you have hardware problems!
[04:09] <thingy> MetaBookfoziS: again, sort out the hardware issue with the disk's geometry not appearing correct in the bios and then try using it in linux or windows
[04:09] <MetaBookfoziS> i see that in windows
[04:09] <MetaBookfoziS> my borther used for backup this disk (at 60mb/s speed) without problems, in an other machine
[04:10] <MetaBookfoziS> so the disk are good... but my mb looks not ...
[04:10] <MetaBookfoziS> i'm trying google
[04:10] <bahr> Is there an open-source alternative for Acronis True Image, so that I can make a complete system recovery of my Kubuntu and XP if something goes wrong?
[04:11] <thingy> bahr: closest app is this : http://www.partimage.org/Main_Page it does partitions only i think
[04:12] <toxic316> how do i make my NTFS external harddrive mount
[04:12] <bahr> thingy: ok thank you. I'll take a look at it
[04:13] <toxic316> any one idea on mounting harddrives
[04:14] <thingy> toxic316: what type of drive is it, how is it connected to your machine?
[04:21] <toxic316> any one want to tell me a program for external harddrive
[04:23] <toxic316> thingy its NTFS formated and USB connection
[04:24] <dangaio> How do I update the kernel? I currently have 2.6.15 generic installed and I would like to install 2.6.20
[04:24] <Daisuke_Laptop> upgrade to feisty
[04:24] <toxic316> i am on feisty
[04:24] <Daisuke_Laptop> not you :P
[04:24] <dangaio> I am on feisty
[04:25] <toxic316> most people are on feisty not
[04:25] <toxic316> now*
[04:25] <thingy> toxic316: in a terminal type in tail -f /var/log/messages then press enter a few times to create some blank space at the bottom of the screen. Un plug the usb hard drive from the machine and plug it in again. it will report message on the terminal saying so so device plugged in and it tell what the device name is for the drive e.g. sda or sdb or sdc etc
[04:25] <toxic316> thank you thingy
[04:25] <Daisuke_Laptop> dangaio: if you're on feisty, you don't have 2.6.15 unless you messed with something drastic.  2.6.20 is the default kernel.  2.6.15 was dapper, and 2.6.17 was edgy
[04:26] <dangaio> well, when I typed in uname -a, I get Linux AMD64 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686 GNU/Linux
[04:26] <dangaio> Oh, sorry, my bad.
[04:26] <dangaio> Can't read
[04:26] <dangaio> LOL
[04:26] <Daisuke_Laptop> ah ha :)
[04:26] <owl> hihi
[04:27] <Daisuke_Laptop> well at least that was an easy one to figure out :D
[04:28] <dangaio> Ok, this is why I was asking... I have 1GB on my pc and just having the system running with only superkaramaba active, it is using over 936MB and 63MB of swap.
[04:28] <dangaio> It is making my system sluggish compared to my laptop.
[04:29] <Daisuke_Laptop> ooh, yeah, it sounds like something's seriously hogging your ram
[04:30] <Daisuke_Laptop> nfs shares in windows is so much easier than trying to mess with samba :D
[04:30] <dangaio> My laptop has the same packages installed and is also 1 GB of ram. It is only using 384Mb.
[04:30] <Daisuke_Laptop> is there an orphaned process on the desktop taking up a ton of ram?
[04:31] <Daisuke_Laptop> should have said "desktop machine"
[04:32] <dangaio> looking at the system processes, it doesn't appear so.
[04:33] <dangaio> CPU is constantly jumping from 10 to 35% usage and the ram is sitting at 951MB
[04:33] <dangaio> when I type free, this is what I get:
[04:34] <dangaio> total       used       free     shared    buffers     cached
[04:34] <dangaio> Mem:       1035780     973720      62060          0     106992     605884
[04:35] <Daisuke_Laptop> what about top
[04:35] <Daisuke_Laptop> mem and swap lines
[04:35] <dangaio> give me a sec
[04:36] <owl> btw i've just another question regarding to my problem i had yesterday... as mentonoed i had the problem, that 2 cds weren't read correctly... burned the iso to a dvd and it worked... could that be an issue with my cd-drive?
[04:36] <dangaio> Mem:   1035780k total,   978644k used,    57136k free,   107200k buffers
[04:36] <dangaio> Swap:  1052216k total,    64412k used,   987804k free,   610256k cached
[04:36] <Daisuke_Laptop> that's not good at all
[04:36] <dangaio> I see that I have a major amount of buffers open.
[04:37] <_Ace2016_> Hi all
[04:37] <dangaio> Hello Ace
[04:37] <owl> hi _Ace2016_
[04:37] <_Ace2016_> anyone know how i can resize my desktop to take up 800x600 in the middle of a 1024x768 screen? like this: http://img409.imageshack.us/my.php?image=desktoptm2.jpg
[04:38] <Daisuke_Laptop> i understand the high ram usage, because of how linux manages memory, but it shouldn't spill over into swap, it should free ram as it's needed
[04:38] <Daisuke_Laptop> so i'm not entirely sure what it's doing there
[04:39] <_Ace2016_> Daisuke_Laptop: well do you have an app taking up all the ram? what does ksysguard show?
[04:39] <anon32> Daisuke_Laptop, what? That looks normal to me.
[04:39] <dangaio> that is why I am stumped. With gentoo, I never ran into this problem
[04:39] <Daisuke_Laptop> _Ace2016_: mine's fine
[04:39] <dangaio> _Ace2016_ it is I that has the problem.
[04:39] <Daisuke_Laptop> i'm trying to figure out what's up with dangaio's system :)
[04:39] <_Ace2016_> oh ok
[04:40] <_Ace2016_> what problem?
[04:40] <yamal> dangaio: these numbers are normal... only 64 mb of swap is used, which can happen if indexing or such things are run
[04:40] <anon32> _Ace2016_, do you just want your wallpaper centered? Or do you also want only 800x600 of your display's pixels used?
[04:40] <yamal> dangaio: and the 610256 kb "cached" is free mem too
[04:40] <_Ace2016_> no i want the entire desktop to fix in the 800x600 area
[04:40] <_Ace2016_> with a black border
[04:40] <Daisuke_Laptop> yay, someone that knows more about it :D
[04:41] <anon32> _Ace2016_, ah, not sure. That would be a driver option.
[04:41] <anon32> got broken pixels or something? that's a pretty unusual feature.
[04:42] <dangaio> yarnal, ok, it's just that it's sometime a little sluggish. Like if I activate katapult and type it takes a while for it to catch up with what I have just typed, or screen savers run slow (even though the drivers are loaded correctly)
[04:42] <_Ace2016_> yea a line on my display :(
[04:43] <shadowhywind> Does anyone have any ideas why if i am using twinview, that kubuntu says that it is just one very large single monitor?
[04:43] <dangaio> with my laptop, almost the same hardware settings, it works wonderfully and only using 348MB...
[04:43] <anon32> shadowhywind, because that's how twinview works
[04:43] <anon32> it glues together 2 framebuffers so that your software sees 1 display, and then the driver splits the framebuffer to each physical display
[04:44] <yamal> dangaio: check if something hogs the cpu when that happens. The ram usage is not the problem
[04:44] <shadowhywind> anon32 is there anyway to change that, So if i do a fullscreen game, for example, it doesn't get displayed in the middle of the split
[04:44] <anon32> it's a hack to let you move stuff between your monitors
[04:44] <dangaio> ok, let me see.
[04:44] <anon32> shadowhywind, compile the game with xinerama support.
[04:44] <anon32> or disable your secondary display
[04:45] <shadowhywind> anon32 know of an easy way, without having to modify xorg and restarting X? a nice little konsole command?
[04:45] <dangaio> wtf? now it is working fine... <dangaio is smashing his head on keyboard>
[04:45] <llutz> shadowhywind: use nvidia-settings
[04:46] <anon32> shadowhywind, to disable your secondary? You have to define a 1-monitor configuration in Xorg.conf in order to switch on-the-fly.
[04:46] <dangaio> Ok, yamal, I found the problem...
[04:46] <shadowhywind> anon32 wait, are you saying that xorg.conf can handle switching when ever i need it, without restarting X?
[04:47] <anon32> Yes, but only if you predefine those modes you want to switch to in xorg.conf
[04:47] <genius> hey necesito ayuda please! no se como instalar programas a mi kubuntu
[04:47] <Jucato> !es
[04:47] <ubotu> Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[04:47] <Jucato> !pt
[04:47] <ubotu> Por favor use #ubuntu-br ou #ubuntu-pt  para ajuda em portugus. Obrigado.
[04:47] <dangaio> Man, I didn't know that amarok uses 43% of the cpu.
[04:48] <anon32> shadowhywind, in your metamodes line in xorg.conf, add one that's like this: "1600x1200,NULL;"
[04:48] <shadowhywind> anon32 anuchance do you have a link/or time to help me set that up with, At the current moment, i just change xorg files for when i need it
[04:48] <dangaio> cpu is getting a really good work out that way.
[04:48] <anon32> http://gentoo-wiki.com/HOWTO_nVidia_TwinView
[04:49] <vbgunz> anyone try this and is it any good? http://tv.seas.harvard.edu
[04:49] <franki_> yo mofo
[04:50] <anon32> vbgunz, it looks shady
[04:50] <vbgunz> anon32: its coming from harvard, thought I ask, seems new
[04:50] <anon32> specially this line "* Go beyond BitTorrent..."
[04:51] <vbgunz> I read most of the pages on there, I think i know what they mean
[04:51] <dangaio> yamal, Daisuke, thanks for the help. I have moved from total newbie to shamed newbie on the newbie scale.
[04:51] <anon32> vbgunz, dunno, if it's from Harvard it can't be that bad, why not try it on a test machine?
[04:51] <mimagyc> sorry what is the link for french support?
[04:51] <vbgunz> am going to look around
[04:52] <rignes> Anyone here use Cedega?
[04:52] <pag> mimagyc, #kubuntu-fr ?
[04:52] <mimagyc> thx
[04:52] <yamal> dangaio: don't be ashamed for asking :)
[04:52] <rignes> Actually, I should ask in #cedega first I think...
[04:53] <dangaio> oh, no. I am not ashamed. I am just harrassing myself. It might make me learn more. LOL.
[04:54] <shadowhywind> anon32 how would i switch on the fly once i have changed the xorg
[04:54] <anon32> shadowhywind, if it worked, there should be a screen resolution available that matches that of your primary dispaly
[04:54] <anon32> display*
[04:54] <anon32> choosing it will put your second one either to "off" or "clone"
[04:54] <dangaio> Ok, I am off to walk the dogs. They are looking at me like, if you don't take us out now... you will be cleaning up a lot of doo doo. LOL. take care everybody see ya' later.
[04:55] <funnelwe1> hello
[04:55] <SlimeyPete> hi
[04:56] <zgmf-x20a> hey guys, bit of an issue with laptop cd rom drive.  basially putting any type of cd in, data, audio cd, etc, kubuntu wont read it and allow me to access it.  i know the dive is fine b/c it works absolutely fine on the vista side of the dual boot.  any idea how i can fix this ????
[04:56] <neusonce> hit it?
[04:57] <zgmf-x20a> lol..... noooooo
[04:57] <neusonce> maybe it wants a bath, linux can feel dirty after operating next to vista
[04:57] <neusonce> idk
[04:58] <genii> zgmf-x20a: If your hd is sata but cd is ide OS may know sata controller but not not ide controller
[04:58] <zgmf-x20a> lol....  no thats not it, it has a whole 210 gb to bath in and vista only has 27 gb
[04:58] <genii> marvell chipset or so
[04:59] <zgmf-x20a> genii: well im not sue on that, it is a very recent laptop though, so i would assume sata.  it is the asus f3sv-a1
[04:59] <owl> holy shit! i guess my soundchip is dead!
[05:00] <genii> zgmf-x20a: Looking it up now for shipset
[05:00] <maverick_> how can i disable "knetworkmanager" asking for kwallet passsword everytime it tries to connect to wireless connection ?
[05:00] <zgmf-x20a> genii: awesome thanks!
[05:06] <pag> !best | maverick_
[05:06] <ubotu> maverick_: Usually, there is no single "best" application to perform a given task. It's up to you to choose among a number of different applications, depending on your preferences, the features you require, and other factors.
[05:06] <SlimeyPete> maverick_: vlc, totem, amarok, beep, xmms, rhythmbox, mplayer, xine... try them all and take your pick ;)
[05:07] <maverick_> SlimeyPete: Just don't say AMAROK....
[05:07] <neusonce> !tor
[05:07] <ubotu> Sorry, I don't know anything about tor - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[05:08] <neusonce> !midgit
[05:08] <ubotu> Sorry, I don't know anything about midgit - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[05:09] <BluesKaj> amaroks!
[05:09] <BluesKaj> vlc is also vg
[05:10] <Daisuke_Laptop> and just what is wrong with amarok?
[05:10] <Daisuke_Laptop> not saying it's the best app ever (it is), just curious why you seem to despise it so
[05:11] <zgmf-x20a> genii: any luck??
[05:12] <genii> examining http://gentoo-wiki.com/HARDWARE_Asus_F3SV for some ideas. It has intel 965PM chipset
[05:13] <martijn81> *soon
[05:13] <BluesKaj> Daisuke_Laptop, what makes you think i despise amarok ?
[05:13] <Daisuke_Laptop> not you :P
[05:14] <Daisuke_Laptop> maverick_
[05:14] <BluesKaj> good :)
[05:14] <Daisuke_Laptop> martijn81: ktorrent's already awesome :D
[05:14] <BluesKaj> amarok is best for streams
[05:14] <Daisuke_Laptop> amarok is awesome for music, period
[05:15] <Daisuke_Laptop> once you get rid of the terrible sqlite database
[05:15] <SlimeyPete> depends on your needs. It's a bit heavy for me.
[05:15] <Daisuke_Laptop> using mysql and it so much snappier now
[05:15] <Daisuke_Laptop> SlimeyPete: that makes sense
[05:15] <Daisuke_Laptop> personally, i've got a 40k+ song library...  i need its library features :D
[05:17] <zgmf-x20a> genii: yah i was looking thru tat right now, no help with the dvd rom though :(
[05:17] <BluesKaj> being old audio guy , playlists and paraphanalia stuff isn't my cuppa tea, i just click on the songs i want in my music folder ...gotta keep it simple
[05:17] <SlimeyPete> Daisuke_Laptop: I have a big library too but I don't listen all that often, and hen I do it's only to a single album (at most), so all the playlist features are unnecessary for me.
[05:17] <SlimeyPete> I just shove my music in folders ;)
[05:18] <genii> zgmf-x20a: On another site i saw someone could not install 6.10 or 7.04 on that laptop. Are you using gutsy?
[05:18] <Q-collective> Daisuke_Laptop: ofcourse those 40k songs are all legally aqcuired? ;)
[05:18] <BluesKaj> small library ... very few mp3s ..mostly lossless
[05:19] <genii> arg AFK a couple mins work
[05:20] <BluesKaj> bbl
[05:20] <elite101> hello
[05:21] <zgmf-x20a> nope, 7.04.  and 6.10 works as well.  i have already tried both on this laptop.  the problem with 6.10 though was the ethernet drivers were not available on the install. and installing the drivers afterwrads was a pain in the ass and didnt work.  then went too 7.04 and everything works excellent now, with net and all, but now have the dvd rom drive issue.  which is odd seeing as how the 7.04 cd installed off
[05:21] <zgmf-x20a> the very same drive
[05:21] <zgmf-x20a> genii: above there
[05:22] <elite101> i was thinking about getting a MINI atx board with 1.2Ghz and a pci slot/pcmia slot witch can be uesful maybe make a custom laptop?
[05:22] <bkudria> is there a list somewhere of differences between normal kdepim and kdepim enterprise?  i see favorite folders in kmail is one, is there anything else?
[05:22] <Daisuke_Laptop> Q-collective: i can actually answer yes to that question
[05:22] <elite101> 185$ for a MOBO with 1.2Ghz prossecor
[05:23] <elite101> althou i could just get a Gigabyte board :\
[05:23] <Q-collective> Daisuke_Laptop: hehe :)
[05:23] <Daisuke_Laptop> they're all self-ripped (or downloaded when i already own a physical copy).  from either my own or my fiancee's cd collection
[05:24] <elite101> yeah rite
[05:24] <Daisuke_Laptop> so i won't say i don't download music, but i don't download music i don't own.
[05:24] <Q-collective> :)
[05:24] <elite101> pfft
[05:24] <Daisuke_Laptop> elite101: just because you're a dirty pirate doesn't mean i am :D
[05:24] <elite101> LOL
[05:24] <Daisuke_Laptop> OH!  i take that back.
[05:24] <elite101> arhhh
[05:24] <Q-collective> In the Netherlands it's actually legal to download if you have a hardcopy
[05:24] <Q-collective> hehe
[05:24] <Daisuke_Laptop> i have downloaded stuff i don't own on cd
[05:24] <Daisuke_Laptop> from archive.org
[05:24] <Daisuke_Laptop> bootlegs ftw :)
[05:25] <Daisuke_Laptop> legal bootlegs, at that :D
[05:25] <elite101> lol so it is in canada lol :P home of the Bittorrents/copied DVDs/wifi piggybacking
[05:25] <elite101> ;) a website stops people from the USA to access it and its bittorents
[05:26] <genii> back
[05:26] <elite101> man dsl sucks :( i hate this distro
[05:26] <Q-collective> adsl2 is nice
[05:26] <Daisuke_Laptop> No manual entry for dsl
[05:26] <Q-collective> :-)
[05:26] <elite101> i have DSL3.4
[05:26] <zgmf-x20a> genii: did you read what i posted?
[05:26] <genii> zgmf-x20a: does it show as a device entry in /dev ? eg:sdb or hdb   etc
[05:26] <Q-collective> dsl 3.4?
[05:26] <elite101> yeah
[05:27] <genii> zgmf-x20a: Yes I read it
[05:27] <elite101> Knoppix
[05:27] <Q-collective> oh
[05:27] <elite101> unless ur talking about internet?
[05:27] <elite101> :S
[05:27] <Q-collective> damn small linux
[05:27] <Q-collective> lol
[05:27] <elite101> yeah
[05:27] <elite101> my HDD burnt out like its dead so im booting off the cd-rom
[05:27] <Q-collective> yeah, I was talking about adsl internet
[05:27] <Q-collective> lol
[05:27] <bkudria> is there a list somewhere of differences between normal kdepim and kdepim enterprise?  i see favorite folders in kmail is one, is there anything else?
[05:28] <elite101> lol thought so
[05:28] <comp10> alina
[05:28] <zgmf-x20a> genii: i dont think so, there is sda, sda1, sda2, sda3, sda4
[05:29] <comp10> pret
[05:30] <genii> zgmf-x20a: Yeah that would just be the partitions of hard drive then. Any scd0 device in there?
[05:35] <zgmf-x20a> genii: yup, your right there is no scd0 in that file
[05:35] <elite101> man IRC chat for DSL is ugly as hell :( its nIRC very weird
[05:35] <Daisuke_Laptop> nIRC?
[05:35] <genii> zgmf-x20a: OK. Thinking.
[05:35] <elite101> yeah
[05:35] <elite101> its like the DSL boot-up screen its multi coloured
[05:36] <elite101> its like talking in a multi coloured Konsole
[05:36] <shadowhywind> anon32 thanks for the link, a few testings, a few shortcuts. And everything is working exactly the way that i want it! Thanks!
[05:38] <elite101> lol It-crowd :) thats the greatest show in the world :)
[05:38] <elite101> not so much codemonkeys?
[05:40] <Daisuke_Laptop> now if i can just get svideo out working on jen's laptop i can watch anime on the tv in the living room.  finally got nfs shares working in windows :D
[05:43] <genii> zgmf-x20a: Is there hda device? (not sda)
[05:43] <elite101> mhm anyone have a MINI-ATX board?
[05:44] <anon32> gah... animu...
[05:44] <elite101> yes
[05:44] <elite101> anime=gay
[05:44] <Daisuke_Laptop> yes yes, you can keep your opinion to yourself, thanks.  i like what i like and i don't care if you don't :)
[05:44] <elite101> ouch?
[05:44] <zgmf-x20a> genii: nope, no hda
[05:44] <elite101> sure it is
[05:44] <Daisuke_Laptop> i watch real movies just as much.
[05:45] <elite101> why????!?!?
[05:45] <genii> bleh
[05:45] <anon32> meh, cartoons are for kids
[05:45] <elite101> yes
[05:45] <kubuntunewbie> can anyone help me get my mp3 player to read FLAC files?
[05:45] <elite101> lolz
[05:45] <elite101> ur mp3 player must support that
[05:45] <anon32> kubuntunewbie, hint: mp3 and FLAC are not the same thing
[05:45] <anon32> !u | elite101
[05:45] <ubotu> elite101: Unless you're Dutch or Flemish, the letter 'U' is not a pronoun.  If you want to be taken more seriously, please bother to type out the extra letters in "you".  The same goes for "why", "because", "anyone", and so on..
[05:45] <elite101> what?
[05:46] <elite101> ahh ic
[05:46] <anon32> ..
[05:46] <elite101> "u" got me therre anon32
[05:46] <kubuntunewbie> anon32: no kidding, i know exactly what a flac file is.. the thing is that im new to linux and i have no idea how to download a decoder
[05:47] <anon32> kubuntunewbie, I know of 2 portable devices that can play FLAC. One is a hacked iPod and the other is a laptop.
[05:47] <anon32> you're going to have to encode to something your player can handle
[05:47] <anon32> elite101, if you can't be helpful, please leave
[05:47] <kubuntunewbie> anon32: i know of many computers that can play flac files.... thats all i want it for
[05:47] <elite101> i asked if the mp3 player even supports it? thats the first thing
[05:47] <kubuntunewbie> anon32: plus flac are totally lossless so they are great if you simply want to burn a CD with the files
[05:48] <anon32> kubuntunewbie, you just asked about an mp3 player...
[05:48] <elite101> exactly
[05:48] <kubuntunewbie> anon32: ahh, i was talking about amarok not a portable mp3 player
[05:48] <elite101> :S?
[05:48] <anon32> ah
[05:48] <anon32> you should be able to just open them with amarok shouldn't you?
[05:48] <anon32> maybe renaming them to .ogg helps
[05:48] <kubuntunewbie> anon32: the flacs wont play on amarok without a plugin/decoder
[05:48] <kubuntunewbie> anon32: duno, not working for me
[05:49] <martijn81> kubuntunewbie: you need libxine-extracodecs
[05:49] <Sanne> kubuntunewbie: there's a flac plugin package for xmms called xmms-flac, maybe there's one for amarok also
[05:49] <kubuntunewbie> NightBird: is it possible that is because flac files are so much larger then mp3 files?
[05:50] <anon32> kubuntunewbie, ah, looks like you want libxine1-ffmpeg
[05:50] <llutz> doesn't "libflac7" enable amarok to play flac?
[05:50] <anon32> kubuntunewbie, no, it's because nobody wants to support communist "open sores software"
[05:50] <gdiebel> Rockbox supports over 20 players and can play flac file on any of them
[05:50] <anon32> llutz, yeah, I was expecting that
[05:50] <NightBird> kubuntunewbie: no, it's battery sucks and probably need replaced
[05:50] <kubuntunewbie> anon32: when i am a suit i am going to support communist open source software
[05:51] <anon32> heh
[05:51] <NightBird> it has a 30 minute life span even when not playing music and just being on
[05:51] <mcdonaldj> lol
[05:51] <mcdonaldj> yeah im at work just got a new laptop
[05:53] <anon32> kubuntunewbie, FLAC plays here (I have the ffmpeg codecs)
[05:53] <mrksbrd> genii, u there?????????
[05:54] <anon32> heh, "bitrate: 700"
[05:55] <kubuntunewbie> anon32: thanks a bunch, that worked great
[05:55] <mrksbrd> when using remote desktop connection, why would "connect" be grayed out after entering ip address???
[05:56] <anon32> yeah, not sure why that's not out of the box
[05:56] <ivan_> salut re:
[05:56] <kubuntunewbie> yeah does not make much sense
[05:56] <kubuntunewbie> but oh well, was an easy install
[05:57] <kubuntunewbie> welp, i gotta find my damn cell phone, takes it easy peepz
[05:57] <ivan_> est-ce qu'il y a des gens qui parlent le franais ici?
[05:58] <stdin> !fr
[05:58] <ubotu> Allez a #ubuntu-fr ou #kubuntu-fr pour de l'aide et de la discussion en francais.
[06:00] <drif> mrksbrd: you need to add port - like ip.ip.ip.ip:5900
[06:00] <Hirvinen> !english | Aranel
[06:00] <ubotu> Aranel: The #ubuntu, #kubuntu and #xubuntu channels are English only. For a complete list of channels in other languages, please visit http://help.ubuntu.com/community/InternetRelayChat
[06:01] <StevenR> Hi. I'm trying to play a dvd with kubuntu 7.04... xine just crashes when I click the dvd button... kaffeine plays the sound, but the picture is just a blue rectangle.... how do I debug/fix this?
[06:01] <drif> StevenR: not quite a solution - but I'd suggest installing vlc
[06:01] <mrksbrd> oh ok
[06:02] <coreymon77> Jucato: you there?
[06:04] <drif> StevenR: also installing 'sudo apt-get install ubuntu-restricted-extras' might help
[06:07] <miles> !find jedit
[06:07] <ubotu> Package/file jedit does not exist in feisty
[06:10] <sito> who can i know the last packages what i 'm installed
[06:12] <StevenR> drif: vlc also crashes
[06:15] <genii> back
[06:16] <genii> My boss' entire family seems to be here today, it appears I've been elected to entertain them...
[06:19] <_Shade_> hi there
[06:20] <_Shade_> I'm using the e-uae amiga emulator to play with it a bit. Does anyone know some website where i can download some adf stuff?
[06:21] <genii> zgmf-x20a: Please pastebin results of the command:   lspci -v
[06:25] <genii> !ping
[06:25] <ubotu> pong
[06:25] <genii> Ok not ghosting :)
[06:26] <Mr_Sonoma> this may be a little off topic but anyone have any experiance with machspeed motherboards? are they good/bad or indifferant?
[06:30] <funnelweb> hi
[06:30] <pag> hello funnelweb :)
[06:34] <paxo__> hola!
[06:34] <paxo__> ??
[06:34] <paxo> ...
[06:36] <g-hennux> hi!
[06:37] <g-hennux> is it correct that if i install the 64bit-version of kubuntu on an amd64 computer, i won't have certain third-party-binary software, like flash, w32codecs etc., right?
[06:37] <pag> yup. that's correct.
[06:37] <g-hennux> but i can still install the 32bit-version and have all of them, right?
[06:38] <pag> So did I do, and all works fine
[06:39] <g-hennux> and then, do i still get any advantages from the 64 bit thingy? well, other way around, are there massive problems when running 32bit linux on amd64?
[06:40] <jhutchins> g-hennux: There's a way to get the 32b ones to work on 64b, although I don't knwo the details.
[06:40] <zipper> doesnt it "just works" - just not performing optimal?
[06:40] <zipper> and ofcourse with the 3gb ram limit
[06:40] <jhutchins> g-hennux: 32b runs great on 64b hardware, and unless you know of a reason you need 64b capabilities, you won't notice the difference.
[06:40] <Sanne> g-hennux: you can also use 64 bit kubuntu and run 32bit only programs in compatibility mode, though some things may involve a bit of manual work.
[06:40] <zipper> just guessing here btw
[06:41] <g-hennux> well, the system is intended for my grandma, so probably no way to get her to do some "compatibilty mode" thingies :-)
[06:41] <g-hennux> ok, thanks for your answers!
[06:42] <Sanne> g-hennux: then better install 23bit :)
[06:42] <Sanne> 32 even
[06:42] <g-hennux> Sanne: ah, you're saying the less bits the easier to handle? :-)))
[06:42] <Sanne> g-hennux: haha! :)
[06:44] <DaleksUnited> random question - kubuntu cant see my PCI sound card - any suggestions?
[06:45] <jose> ayuda please
[06:46] <mankeletor> jose: what's your problem?
[06:46] <mankeletor> recien entro al channel y no vi si lo escribiste antes
[06:46] <mankeletor> :P
[06:46] <jose> cuando inicio sesion con kubuntu, se cuelga la makina
[06:46] <jose> nose xq =S
[06:47] <mankeletor> kernel panic?
[06:47] <mankeletor> te sale kernel panic?
[06:47] <jose> no sale nada,se abre la ventana del kopete y se cuelga
[06:49] <jose> y nose xq se cuelga ps tengo q estar reiniciandola
[06:49] <d0uglas> hey now.. any way to join a bluetooth personal area network or is that an ms thing
[06:50] <funnelweb> anybody who goes to school?
[06:50] <DaleksUnited> funnelweb?
[06:51] <funnelweb> anybody who learn or learned german?
[06:51] <zipper> funnelweb, i did. I also learned english.
[06:51] <zipper> and when i did learn english, i discarded my german skills =P
[06:51] <funnelweb> DaleksUnited: you will know my reason later
[06:52] <Feudster> Hello all
[06:52] <Feudster> Would someone be kind enough to explain what an x shell is
[06:52] <DaleksUnited> funnelweb: I have german to GCSE level, if that means anything to you
[06:53] <DaleksUnited> 5 year course
[06:53] <funnelweb> zipper: did you learn it as a mother tongue?
[06:53] <pag> !offtopic
[06:53] <ubotu> #kubuntu is the official Kubuntu support channel, for all Kubuntu-related support questions. Please use #kubuntu-offtopic for general chatter. Thanks!
[06:54] <g-hennux> Feudster: this is a terminal which runs under the x server, i.e. no virtual terminal (like what you get with ctrl+alt+f1), but rather something like xterm, konsole etc.
[06:54] <llutz> Feudster: x-shell? something like a terminal-emulation (xterm, rxvt), which gives you a shell in X?
[06:54] <zipper> funnelweb, no. My mother tongue is danish.
[06:54] <funnelweb> i only wanted to suggest to correct his german, and otherwise he correct my english
[06:55] <funnelweb> because that would be a good training for both, i think
[06:55] <Feudster> ok i am new to ubuntu and linux! i have a small app called gmail notify! i have downloaded the file and need to open an x shell to start install
[06:55] <Feudster> how do i open
[06:55] <llutz> Feudster: press alt-f2 and enter "konsole" without quotes
[06:56] <Feudster> thankyou kindly
[06:56] <Feudster> Could not open location 'file:///konsole'
[06:56] <llutz> Feudster: not in konqueror, "alt+f2"
[06:57] <funnelweb> ok, i see, there is no need
[06:57] <funnelweb> bye
[06:57] <Feudster> that is what i did
[06:57] <Feudster> same result each time
[06:58] <DaleksUnited> feudster - click the blue 'K' in the bottom left, >system>Konsole
[06:58] <Sanne> Feudster: gmail-notify is in the ubuntu repositories
[06:58] <Feudster> i dont have a blue k at the bottom
[06:59] <g-hennux> Feudster: are you using gnome?
[06:59] <Feudster> i have just installed latest ubuntu
[06:59] <g-hennux> Feudster: ah, so not *k*ubuntu?
[06:59] <Feudster> whats that?
[06:59] <g-hennux> Feudster: ah, ok :-) wait a sec
[06:59] <llutz> Feudster: this is Kubuntu :) KDE, not ugly-gnome
[07:00] <Feudster> oh
[07:00] <Feudster> whats the difference?
[07:00] <g-hennux> Feudster: https://help.ubuntu.com/community/CommonQuestions#head-a53a91acd9a5b9d2e1667c8c0c05ba469c943ce6
[07:00] <llutz> Feudster: ubuntu uses gnome, kubuntu uses KDE by default
[07:00] <Sanne> Feudster: enable the universe repository, search for gmail-notify in synaptic package manager, and install it from there.
[07:00] <g-hennux> Feudster: anyway, if you are using plain ubuntu, try asking in #ubuntu instead
[07:01] <Feudster> thx my fault i had no idea
[07:01] <Feudster> will do
[07:01] <Sanne> Feudster: and this will help you understand how to install software: https://help.ubuntu.com/community/SoftwareManagement
[07:01] <Feudster> thankyou
[07:01] <Sanne> :)
[07:02] <jose> se cuelga mi makina csm
[07:05] <Feudster> One last question if i may, Is it just asthetics that are different between kbuntu and ubuntu? or does kbuntu offer more
[07:05] <llutz> Feudster: it's a completely different desktop-environment in use. it has pros and cons, hard to explain
[07:06] <Feudster> ok i will have to do some reading up i see
[07:06] <llutz> Feudster: Gnome is called to be easier to handle for users. KDE offers more options
[07:06] <TonserPerson> hey...linux noob here :P is it easy to install beryl and AIGLX on kubuntu?
[07:07] <Feudster> thanks ill stick with ubuntu till i feel more confident with linux, once again thx for the help  bye
[07:07] <Sanne> Feudster: they only differ in the desktop environment, GNOME for ubuntu, KDE for Kubuntu. Gnome tends to be more streamlined and easier to use for beginners, KDE offers more config options but may overwhelm new users. Mostly it's a matter of taste. You can install both on the same system and switch between both at login.
[07:12] <imagine[laptop] > anyone tried to run firebug with Firefox ?
[07:12] <imagine[laptop] > I can't installit
[07:13] <FireCrotc1> imagine[laptop] : firebug works for me
[07:14] <imagine[laptop] > weird
[07:17] <funnelweb> z1pp3r:
[07:18] <z1pp3r> ye?
[07:21] <voln> Alt-F2 - what's name of comand? kpcontrol?
[07:22] <funnelweb> z1pp3r: jabber?
[07:22] <toxic316> hay any one got an idea of how to get ntfs working
[07:22] <g-hennux> toxic316: in what way, working?
[07:22] <funnelweb> i think there is a programm
[07:23] <g-hennux> toxic316: apt-cache search ntfs?
[07:23] <llutz> voln: "kfmclient exec <cmd>" i guess
[07:23] <llutz> !ntfs-3g | toxic316
[07:23] <ubotu> toxic316: ntfs-3g is a Linux driver which allows read/write access to NTFS partitions. Installation instructions at https://help.ubuntu.com/community/MountingWindowsPartitions
[07:24] <toxic316> its an external which i cant acess but auto play still works
[07:24] <g-hennux> toxic316: does access mean read or write?
[07:24] <toxic316> both i cant read the files on it or write files to it
[07:24] <g-hennux> try the fuse tools, i.e. apt-cache search fuse ntfs
[07:25] <voln> llutz no, I need system configuration, press Alt-F2, then command
[07:25] <llutz> voln: kcontrol
[07:25] <toxic316> so what command in terminal
[07:25] <voln> llutz thanks
[07:25] <g-hennux> i think there are two different ways to handle ntfs, one is with ntfs support in the kernel, then you have to give parameters like uid=... when mounting as root, the other is AFAIK via fuse, where you can mount as user, which should solve the problem
[07:25] <toxic316> how do i get fuse then
[07:26] <g-hennux> open a console and enter "apt-cache search fuse", which will show a list of packages
[07:26] <g-hennux> toxic316: i'm actually not on kubuntu, so i cannot really tell you package names etc
[07:26] <toxic316> ok
[07:27] <toxic316> it just says invaild operation install
[07:27] <g-hennux> apt-cache search XXX -> apt-get install XXX
[07:28] <baschdel> hi all
[07:28] <z1pp3r> funnelweb, no... i mean, i know i should be using jabber, but what can i do? All my non-geek friends uses msn so i cant be bothered
[07:28] <toxic316> is it fuse-utils
[07:28] <baschdel> can someone test this links pls?
[07:28] <baschdel>  /ubuntu/pool/main/w/wireshark/wireshark_0.99.2-5ubuntu1_i386.deb
[07:29] <baschdel> just check alive
[07:29] <funnelweb> than use msn
[07:29] <funnelweb> i have it too
[07:29] <z1pp3r> priv
[07:29] <baschdel> someone checked it?
[07:29] <baschdel> :)
[07:29] <g-hennux> baschdel: which "link"?
[07:30] <baschdel>  /ubuntu/pool/main/w/wireshark/wireshark_0.99.2-5ubuntu1_i386.deb
[07:30] <baschdel> did you get it?
[07:30] <g-hennux> baschdel: that's a path; if you want us to check anything, you should give us a url
[07:30] <baschdel> oh damn it sry
[07:31] <ymsg> hey
[07:31] <g-hennux> baschdel: ftp://ftp.ubuntu.com/ubuntu/pool/main/w/wireshark is empty
[07:31] <ymsg> french room pls
[07:31] <llutz> !fr
[07:31] <ubotu> Allez a #ubuntu-fr ou #kubuntu-fr pour de l'aide et de la discussion en francais.
[07:31] <baschdel>  http://nl.archive.ubuntu.com/ubuntu/pool/main/w/wireshark/wireshark_0.99.2-5ubuntu1_i386.deb
[07:31] <ymsg> ty
[07:32] <tim> I'm showing empty on the link
[07:33] <baschdel> hmm
[07:36] <g-hennux> has ubuntu removed wireshark from their repos? :-)
[07:37] <g-hennux> baschdel: i believe this has something to do with wireshark being in universe, not main
[07:37] <llutz> g-hennux: installs fine here from de.archive.ubuntu.com (universe)
[07:37] <g-hennux> baschdel: use http://de.archive.ubuntu.com/ubuntu/pool/universe/w/wireshark/
[07:38] <llutz> baschdel:  http://nl.archive.ubuntu.com/ubuntu/pool/universe/w/wireshark/
[07:38] <g-hennux> llutz: or nl, if you prefer :-)
[07:38] <phoenixz> Hi there! I need to install GTK-dev, but I cant find that package in the repo list..
[07:38] <llutz> g-hennux: not me, baschdel gave nl-link
[07:39] <g-hennux> llutz: ok, i see
[07:40] <llutz> anyway, it's still in universe (forbidden to use in .de now)
[07:41] <toxic316> yea the fuse thing didnt work
[07:42] <g-hennux> llutz: ah, is it now?
[07:42] <toxic316> any one else got any ideas for like ntfs or fat 32 hdds beign reconised
[07:42] <llutz> g-hennux: "Hackerparagraf" durchgewunken, Sicherheit ade </OT>
[07:43] <g-hennux> llutz: phew, now we are finally safe, after all :-)
[07:44] <toxic316> can any one tell me how to put the ntfs module on in kenral
[07:44] <Mr_Sonoma> g-hennux, i would say no, apt-cache search wireshark just returned 8 hits on my fiesty system
[07:44] <phoenixz> What repo do I need to be able to install the GTK dev package?
[07:44] <g-hennux> Mr_Sonoma: yeah, i didn'T say it isn't there, just discovered it's on universe, not in main
[07:45] <Mr_Sonoma> =)
[07:46] <g-hennux> toxic316: do you have the command ntfsmount?
[07:47] <toxic316> not sure
[07:47] <TonserPerson> hmmm im having trouble installing kubuntu...its giving me a hard time when i try to run the install
[07:47] <g-hennux> toxic316: open a shell, say "ntfsmount" and see what is returned
[07:47] <g-hennux> TonserPerson: "hard time"?
[07:47] <TonserPerson> right after *starting bluetooth services
[07:47] <toxic316> dont have program install
[07:48] <g-hennux> toxic316: ok, so you plug in your drive and a window opens in konqueror?
[07:48] <toxic316> yea its the auto run one
[07:48] <g-hennux> open a shell, say "mount" and paste the line that contains the ntfs device
[07:48] <toxic316> where you choose options i choose to open it in konquer and it does nothign
[07:49] <toxic316> is there a gui for fuse
[07:49] <g-hennux> toxic316: open a shell, say "mount" and paste the line that contains the ntfs device
[07:50] <TonserPerson> i get "bcm43xx:Error:microcode "bcm43xx_microcode5.fw not available or load failed"
[07:50] <toxic316> tim@tim-laptop:~$ mount
[07:50] <toxic316> /dev/sda1 on / type ext3 (rw,errors=remount-ro)
[07:50] <francois> hey, my kwallet keeps asking me for a password requested by dcopserver, what is this used for ? and does anyone know why its asking for a password ?
[07:50] <toxic316> proc on /proc type proc (rw,noexec,nosuid,nodev)
[07:50] <toxic316> /sys on /sys type sysfs (rw,noexec,nosuid,nodev)
[07:50] <g-hennux> toxic316: only the line with ntfs
[07:50] <toxic316> varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755)
[07:50] <kewl_> i m having installation problem....
[07:50] <toxic316> varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
[07:50] <jason__10> Laptop Fans, Talk to me...  I Have a fan  thats supposed to blow out the bottom of my laptop, but it is never on, my temperature is generall 55 degrees. Any ideas on how to turn it on?
[07:50] <toxic316> procbususb on /proc/bus/usb type usbfs (rw)
[07:50] <toxic316> udev on /dev type tmpfs (rw,mode=0755)
[07:50] <toxic316> devshm on /dev/shm type tmpfs (rw)
[07:50] <toxic316> devpts on /dev/pts type devpts (rw,gid=5,mode=620)
[07:50] <toxic316> lrm on /lib/modules/2.6.20-16-generic/volatile type tmpfs (rw)
[07:50] <toxic316> binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
[07:50] <TonserPerson> kewl__welcome to the club
[07:51] <g-hennux> what exactly has killed toxic? :-)
[07:51] <phoenixz> jason__10, AFAIK, 55 degree is very ok.. a laptop fan only makes noise and is not needed at such temps..
[07:51] <kewl_> actually its saying no harddisk found for installation
[07:52] <gekko_> i'm trying to install gutsy but the installer doesnt detect my partition table (my other partitions) if i choose manual partitioning. does anyone know a solution?
[07:52] <g-hennux> kewl_: serial ata?
[07:52] <jason__10> phoenix thanks mate, its just inm starting to get dark patches on my silver laptop that wont wip off... i thought it was because of heat
[07:53] <phoenixz> Maybe somebody over here could tell me how I can install GTK dev package? I cant find it in adept manager
[07:53] <g-hennux> phoenixz: "apt-cache search gtk dev" returns what?
[07:54] <llutz> phoenixz: libgtk2.0-dev
[07:54] <phoenixz> jason__10, 55 degrees really is np.. My P4 proc is 55 degrees a few seconds after starting up.. when busy, it can easily go >75 degrees.. as long as you stay.. say, under 70, you ought to be ok
[07:54] <kewl_> g-hennux: yes SATA
[07:54] <Xplicit> how do i find out the adress of a phone i connect by bluetooth
[07:54] <jason__10> phoenix thats cool, maybe it only comes on when it needs to
[07:54] <phoenixz> g-hennux, llutz, thanks lluts! That was the one, I was looking for just plain gtk-dev..
[07:55] <jason__10> phoenix I just cant hear any fan, ever
[07:55] <kewl_> actually i hav encountered same problem in my frnds comp.. which is bit ancient one....& in my HP laptop..which is latest both have sata
[07:56] <phoenixz> jason__10, Just keep a good eye on the temp.. if it stays 55, then I'd be happy that you don't need a fan.. fan = irritating noise
[07:56] <g-hennux> kewl_: then this is maybe the problem? i know this is not an easy issue, sometimes not even with windows
[07:56] <phoenixz> jason__10, and you can use nick comlpetion, which will make it phoenixz, not phoenix :)
[07:56] <jason__10> 65 is max ive seen
[07:56] <jason__10> lol
[07:56] <jason__10> then I would have to type it thanks to Phillip5
[07:57] <jason__10> no sorry
[07:57] <jason__10> I just have to type a Z
[07:57] <jason__10> LOL
[07:57] <phoenixz> jason__10, que? I don't understand ya :)
[07:57] <kewl_> g-hennux: yes i tried to install ubuntu ,, suse,,,fedora but result ws same
[07:57] <ryanparsons> can anyone help me with networking??
[07:57] <g-hennux> kewl_: try to have a look at what is needed for sata, maybe you need to do modprobe somemodule before you start the isntaller
[07:58] <tarntow> i installed realplay but cannot run the program at all? thanx
[07:58] <ryanparsons> hellooo
[07:59] <jason__10> phoenixz sorry their is a guy called Phoenix_ in here also so I was just going for the first name to complete
[07:59] <phoenixz> jason__10, np
[07:59] <g-hennux> ryanparsons: just tell about your problem
[07:59] <kewl_> g-hennux: well roghly what about this error is??
[07:59] <phoenixz> ryanakca, whaat zeemz tobe thie probleeem?
[07:59] <ryanparsons> ubuntu server lts behind firewall can ping local subnet but not external subnet
[08:00] <g-hennux> kewl_: sorry?
[08:00] <jhutchins> ryanparsons: set gateway
[08:00] <ryanparsons> oter machines behind firewall can ping out
[08:00] <ryanparsons> have done
[08:00] <ryanparsons> can ping gateway too
[08:00] <g-hennux> ryanparsons: traceroute out and see where it stops
[08:00] <phoenixz> ryanakca, what g-hennux says..
[08:00] <ryanparsons> traceroute not installed
[08:00] <dranas> good morning everyone
[08:01] <phoenixz> ryanparsons, could you install it?
[08:01] <g-hennux> ryanparsons: ok, so what is the message when pinging 66.249.93.104?
[08:01] <kewl_> g-hennux: i mean is there anything wrong with harddisk??
[08:01] <ryanparsons> ill hunt it down, best use a .deb package?
[08:01] <phoenixz> dranas, mornin
[08:01] <phoenixz> dranas, actually, afternoon
[08:01] <g-hennux> kewl_: i believe it's just linux kernel && sata
[08:01] <phoenixz> ryanparsons, Id use apt-get...
[08:02] <g-hennux> kewl_: no experience, sorry
[08:02] <kewl_> g-hennux: ok thnx...for this much :)
[08:02] <ryanparsons> PING 66.249.93.104 (66.249.93.104) 56(84) bytes of data.
[08:02] <ryanparsons> --- 66.249.93.104 ping statistics ---
[08:02] <ryanparsons> 6 packets transmitted, 0 received, 100% packet loss, time 5004ms
[08:02] <dranas> i have to painstakingly upgrade from dapper again
[08:03] <arash_> Hi, anyone found any 'easy way' to fix your sound drivers?
[08:03] <ryanparsons> all other machines behind firewall can ping out
[08:03] <ryanparsons> dns is resolving properly
[08:03] <g-hennux> ryanparsons: what kind of firewall? you can ping the firewall itself from your machine?
[08:03] <ryanparsons> yes i can
[08:03] <g-hennux> ryanparsons: what have you set as dns server?
[08:03] <ryanparsons> gateway and isp dns
[08:04] <ryanparsons> dns is resolving fine
[08:04] <g-hennux> ryanparsons: i cannot belive the gateway is set correctly
[08:04] <dranas> easy way = dont have sound    lol
[08:04] <ryanparsons> ping www.google.com
[08:04] <ryanparsons> PING www.l.google.com (64.233.183.104) 56(84) bytes of data.
[08:04] <ryanparsons> --- www.l.google.com ping statistics ---
[08:04] <ryanparsons> 2 packets transmitted, 0 received, 100% packet loss, time 1007ms
[08:04] <g-hennux> ryanparsons: dns resolving works because the firewall acts as dns server
[08:04] <tim> heya, when I start adept, it says another ap is using the packaging system
[08:05] <g-hennux> toxic316: what's going on with you? :-)
[08:05] <ryanparsons> Ive tried both static and dhcp no diff
[08:05] <dranas> try closing the updater
[08:05] <ryanparsons> with gw correct
[08:05] <tim> if one is, how do I find it? nothing on "top" and nothing running I know of
[08:05] <dranas> look in the performance manager
[08:05] <tim> the updater says so to btw
[08:05] <dranas> performance monitor sorry
[08:05] <dranas> and look for adept
[08:05] <toxic316> you got terminal or the updater on as well
[08:06] <arash_> dranas - hahaha, you don't know any program that download the drivers for you? since usually there are some programs fixing those things instantly for you, but you always find them 5 hours after dealing with slow manuals...
[08:06] <dranas> i think it depends on your sound equipment
[08:06] <g-hennux> ryanparsons: does your router/firewall decide on some thingy whether to route or not?
[08:07] <ryanparsons> sorry dont understand
[08:07] <tim> nope, nothing showing. how does file lock work?
[08:07] <g-hennux> ryanparsons: is this a normal router that routes anything plugged in via lan?
[08:07] <ryanparsons> all other machines behind firewall connect fine
[08:07] <mankeletor> hey guys, what's the default mount script in kubuntu?
[08:07] <ryanparsons> yes basically
[08:08] <g-hennux> ryanparsons: or is this something advanced like: "forward only ports 1-4 and not port 5"?
[08:08] <mankeletor> it's /etc/init.d/mountall.sh?
[08:08] <thehcdreamer> have any of you notice that Amule interface crash and never start properly? or am i the only unlucking here?
[08:08] <toxic316> how do i modify fstab
[08:08] <dranas> arash_ you can try going to the sound system configuration and go to the hardware tab and select auto detect
[08:08] <llutz> toxic316: sudo nano /etc/fstab
[08:08] <g-hennux> toxic316: sudo nano /etc/fstab
[08:08] <g-hennux> llutz: damn, too slow :-)
[08:09] <ryanparsons> I have the avanced outbound NAT disabled so yes it does route automatically
[08:09] <toxic316> how do i make it so mounting a hdd can be for normal users
[08:10] <genii> use option user
[08:10] <toxic316> i dont know how
[08:10] <g-hennux> ryanparsons: maaaaan, this drives me crazy :-)
[08:10] <_Blue2_> hey do you prefer any programs for to use php at local machine .. i mean something like easy php ?
[08:10] <ryanparsons> youre not the only one
[08:11] <ryanparsons> im busy trying to get traceroute onto the machine
[08:11] <g-hennux> ryanparsons: ok, step by step. only one network interface on that computer?
[08:11] <arash_> dranas, I can only partially hear sound,  Amarok sounds, but not some of my 'legally bought' series.., vlc don't make sound, and all other media players never starts up, I really think it
[08:11] <g-hennux> eth0?
[08:11] <ryanparsons> yes eth0
[08:11] <genii> on the line for the one you want to mount is something like rw,auto    or so. just before the two zeros. Put a comma afer the last word there and add users between the comma and the first zero. Don't let the zero come down to the next line
[08:11] <dranas> oh hmmm sounds like a driver issue
[08:11] <dranas> hold on a sec
[08:12] <genii> *user only, not plural
[08:12] <g-hennux> ryanparsons: say dhclient eth0, then tell me the ip and gateway that ifconfig eth0 reports
[08:12] <toxic316> genii how do i get there thoguh
[08:13] <_Blue2_> do you know any  programs like easyphp ? for to use php on my localmachine ???
[08:13] <toxic316> im just staring at terminal and dont know how to get there
[08:13] <genii> toxic316: sudo nano /etc/fstab
[08:13] <ryanparsons> Listening on LPF/eth0/00:11:85:c2:30:02
[08:13] <ryanparsons> Sending on   LPF/eth0/00:11:85:c2:30:02
[08:13] <ryanparsons> Sending on   Socket/fallback
[08:13] <ryanparsons> DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
[08:13] <ryanparsons> DHCPOFFER from 10.1.0.2
[08:13] <ryanparsons> DHCPREQUEST on eth0 to 255.255.255.255 port 67
[08:13] <ryanparsons> DHCPACK from 10.1.0.2
[08:13] <toxic316> ok i do that then what
[08:13] <ryanparsons> bound to 10.1.0.7 -- renewal in 39090 seconds.
[08:13] <arash_> !paste |ryanparsons
[08:13] <ubotu> ryanparsons: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (be sure to give the URL of your paste - see also the #kubuntu channel topic)
[08:14] <genii> toxic316: Which drive is it you wish regular users to be able to mount? go to the line for it.
[08:14] <dranas> arash_ did you install the ugly codec pack?
[08:14] <g-hennux> ryanparsons: ifconfig eth0?
[08:15] <arash_> dranas . ugly ? is it's 'real' name?, No, i dont remember doing that... But i know Sound have worked fine some sessions before, and Kmix has been acting really strange too
[08:15] <genii> toxic316: Then put cursor after last existing option. this is whatever the last word is before the two zeros which are there. add a comma then put user    then exit with ctrl-x saving the file when asked
[08:15] <dranas> search google for it
[08:15] <dranas> it is ugly
[08:15] <arash_> dranas, ok tanks
[08:15] <ryanparsons>  http://paste.ubuntu-nl.org/35575/
[08:15] <dranas> im upgrading right now so my web browser isnt working
[08:16] <genii> Bah
[08:16] <g-hennux> ryanparsons: route -n
[08:17] <arash_> dranas ok thanks , is it really called ugly :? I try check ubotu first
[08:17] <greenday> hey . can someone plz help ? .. how can i use php on localmachine ?..
[08:17] <dranas> yes, like check for "adding mp3 support in amarok" and itll tell you the name of it
[08:17] <dranas> i know there are serveral different packs
[08:17] <ryanparsons> http://paste.ubuntu-nl.org/35576/
[08:17] <llutz> greenday: install php5-cli
[08:18] <dranas> and the one with all the good ones is called ugly
[08:18] <greenday> llutz: is there any other ??
[08:18] <dranas> something ugly, look it up in amarok
[08:18] <g-hennux> ryanparsons: and ping google.com still does not work?
[08:19] <ryanparsons> nope
[08:19] <arash_> dranas , ahh!!!!!!!!!! FOund it, it might not be due to drivers
[08:20] <g-hennux> ryanparsons: think i got it
[08:20] <ryanparsons> awesome dude
[08:20] <g-hennux> ryanparsons: you wrote: "DHCPOFFER from 10.1.0.2", then why is your gateway 10.1.0.1?
[08:20] <ryanparsons> youre a genius if you have
[08:20] <g-hennux> ryanparsons: cat /etc/resolv.conf
[08:21] <ryanparsons> ahh ok the dhcp is offered from a server not the gateway
[08:21] <g-hennux> ryanparsons: so is this correct or what? should not the router be the dhcp server, too?
[08:21] <g-hennux> hi tackat
[08:22] <ryanparsons> no that is correct the way it is
[08:22] <arash_> It actually seems that only one program can use sound at one time due to (ALSA) ... I actually paused amarok and then started a video, then it worked....... Is this Linux sound system really that terrible?
[08:22] <ryanparsons> http://paste.ubuntu-nl.org/35577/
[08:22] <tackat> g-hennux: hi Tobias
[08:22] <g-hennux> ryanparsons: ok, so your dhcp server and your dns server are different than your gateway?
[08:22] <ryanparsons> yes
[08:23] <g-hennux> wtf?
[08:23] <ryanparsons> dhcp is being offered from windoze server
[08:23] <ryanparsons> gateway is firewall
[08:23] <g-hennux> ryanparsons: and all other machines also use 10.1.0.1 as gw?
[08:24] <g-hennux> ryanparsons: and no other machine has the same ip?
[08:24] <ryanparsons> yes
[08:24] <ryanparsons> nope
[08:24] <BluesKaj> arash_, when your alsamixer and kmix controls are setup ...you can hear several diff sources at once , if that's your preference
[08:24] <g-hennux> ryanparsons: ping 10.1.0.1?
[08:25] <ryanparsons> http://paste.ubuntu-nl.org/35578/
[08:25] <g-hennux> ryanparsons: get traceroute :-)
[08:25] <g-hennux> ryanparsons: i'll bet the error is on the gateway
[08:25] <arash_> BluesKaj, hmmm what you mean 'setup' ?
[08:25] <g-hennux> ryanparsons: i'm afk for some minutes
[08:26] <ryanparsons> ok
[08:26] <greenday> hey . can someone plz help ? .. how can i use php on localmachine ?..
[08:27] <ryanparsons> dont understand if the gateway is the prob, why are the other machine on network ok?????
[08:27] <arash_> !php
[08:27] <ubotu> LAMP is an acronym for Linux-Apache-MySQL-PHP. However, the term is often used for setups using alternative but different software, such as Perl or Python instead of PHP, and Postgres instead of MySQL. For help with setting up LAMP on Ubuntu, see  https://help.ubuntu.com/community/ApacheMySQLPHP - See also the Server CD installation process (different in Edgy+)
[08:27] <arash_> check that greenday, did u check that?
[08:28] <ryanparsons_> .
[08:29] <BluesKaj> arash_, have you checked 'alsamixer' in the konsole to unmute the ctrls that you need ?
[08:29] <arash_> hmm, I have a look BluesKaj, thanks
[08:29] <greenday> arash_: thanxx
[08:29] <greenday> arash_: i ll check it now. .
[08:29] <max> 
[08:30] <arash_> !russia
[08:30] <ubotu> Sorry, I don't know anything about russia - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[08:30] <genii> russian or greek, I wonder
[08:30] <arash_> !russian
[08:30] <ubotu>    #ubuntu-ru       /  Pozhalujsta vojdite v #ubuntu-ru dlq pomoshchi na russkom qzyke
[08:30] <yamal> !ru | max
[08:30] <ubotu> max: please see above
[08:30] <max> ok
[08:30] <max> thanks
[08:31] <arash_> no problem :)
[08:31] <genii> Interesting pipe behaviour now from ubotu
[08:31] <max> may i answer you about problem NVidia drivers?
[08:31] <genii> He's getting smarter or something
[08:32] <arash_> max, you have solution or problem with NVidia drivers?
[08:32] <max> i have problem
[08:32] <max> problem is:
[08:33] <max> when i pres ALT+CTRL+F2 i dont see any more
[08:34] <max> i dont catch the bash
[08:34] <max> i can't login when i pres this key
[08:34] <max> why???
[08:35] <Luismi> then CTRL-ALT-F3
[08:35] <Luismi> F4
[08:35] <Luismi> F5
[08:35] <Luismi> F6
[08:35] <greenday> !turkish
[08:35] <ubotu> Sorry, I don't know anything about turkish - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[08:35] <Luismi> F7
[08:35] <judgen> whoop dee doo
[08:35] <arash_> hmm, if pressing alt+ctrl+f2 , Im no expert, but is it needed really?
[08:36] <max> but in other distribution i can do it, for example
[08:38] <max> and when i halt my system, my monitor "going for sleep"
[08:38] <runlevelten> You forgot F8, F9 and F10 by the way.
[08:38] <runlevelten> :P
[08:39] <max> my english is to bad, but i now what i i whont to tell yoy
[08:40] <ryanparsons_> g-hennux you were right, it was the gateway
[08:40] <max> may is to deficult for me, may be in russian server people help me
[08:40] <max> bye
[08:40] <ryanparsons_> thx man you rool
[08:42] <g-hennux> ryanparsons_: thanks, but what exactly?
[08:42] <ryanparsons_> there was a 1:1 NAT setting enabled on the gateway
[08:43] <g-hennux> ryanparsons_: ok... man, that was a weird thing anyway... :-)
[08:43] <ryanparsons_> yea had me going for 3 days now
[08:43] <ryanparsons_> doh
[08:43] <g-hennux> ryanparsons_: !!! :-)
[08:43] <arash> max ,yea I use Nvidia too, and all went black after for no reason pressing alt+ctrl+f2, but why rpress it?
[08:43] <ryanparsons_> yea
[08:44] <Door> hello
[08:45] <arash> Hi Door!
[08:45] <Door> i am new here, i dont know if there is another Door here...
[08:46] <arash> Nope, I never seen any Door before ;), just welcoming you
[08:46] <FireCrotc1> I'm using Compiz Fusion and I'm having issues with window focus that I can't figure out.  windows are gaining focus when I mouseover them, which I don't want to hapen
[08:46] <Door> i have a question
[08:46] <Door> where i can find a guide to activate direct rendering on kubuntu 7.04 and i915 / i810?
[08:46] <FireCrotc1> the windows aren't coming to the top though, the only way I can get a window to the top is to click the titlebar
[08:46] <arash> !rendering
[08:46] <ubotu> Sorry, I don't know anything about rendering - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[08:47] <BluesKaj> !intel
[08:47] <ubotu> Sorry, I don't know anything about intel - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[08:47] <arash> Sorry, I cant help you then Door :(, I bet someone else can tough
[08:47] <Door> i know intel....
[08:48] <Door> and ati....
[08:48] <BluesKaj> Door , intel graphics ?
[08:48] <Door> yes....
[08:48] <BluesKaj> or ati graphics ?
[08:48] <Door> i ddnt choose to put intel graphics into my laptop
[08:48] <Door> is an intel
[08:49] <BluesKaj> !graphics
[08:49] <ubotu> Sorry, I don't know anything about graphics - try searching on http://bots.ubuntulinux.nl/factoids.cgi
[08:49] <Door> works correctly under gentoo and sabayon but under kubuntu i cant activate it
[08:50] <BluesKaj> strange there's help for ATI and nVidia , but not intel
[08:50] <TonserPerson> hey...
[08:50] <TonserPerson> does anyone know how to avoid this error while loading install?
[08:50] <TonserPerson> i get "bcm43xx:Error:microcode "bcm43xx_microcode5.fw not available or load failed"
[08:51] <Door> i dont know how edit the kernel, i always used make menuconfig
[08:51] <Door> but under kubuntu doesnt works...
[08:52] <BluesKaj> Door, sudo apt-get install 915resolution
[08:52] <TonserPerson> hmmm
[08:53] <Door> i have i915resolution
[08:55] <llutz> Door: have you tried xserver-xorg-video-intel
[08:56] <BluesKaj> Door, check this article , it might help ,http://www.osnews.com/story.php/17505/Ubuntu-Feisty-Fawn-Desktop-Linux-Matured/
[08:59] <Door> xserver-xorg-video-intel...??
[08:59] <Door> never heard about it
[09:00] <helmut_> keyboard without num-block
[09:06] <Angelus> where are the KDE Headers installed in kubuntu?
[09:06] <jacopo> any one know why my kubuntu, very very often, dont connect to the wireless internet and I must reboot a lot of time before that it work?
[09:07] <helmut_> jacopo: there is less wireless integration into linix
[09:08] <jacopo> ok  thanks
[09:10] <nodesert> i have file system error on my Harddisk can i fix this?
[09:11] <helmut_> jacopo: do you use ndis-wrapper
[09:12] <llutz> nodesert: umount partition, run fsck
[09:12] <jacopo> no, I have a broadkom bcm43xx so i use the "bcm43xx-fwcutter" to obtain the driver
[09:12] <ELMANIFICO> pls send me link to juventus irc chanel pls
[09:12] <Angelus> where are the KDE Headers installed in kubuntu?
[09:13] <nodesert> llutz:then everything will be ok?
[09:13] <nodesert> llutz:cuz it is my root disk
[09:13] <llutz> nodesert: use live-cd
[09:15] <nodesert> ok thanks
[09:15] <helmut_> i haven't found any card with correct working driver. so i use ndis-wrapper with windows drivers and a shell script to activate the connection
[09:17] <jacopo> well, so now i try to use the ndis-wrapper and I hope that it work!
[09:17] <jacopo> thanks!
[09:21] <susan> Just a quick question, I had to reinstall micro(nice word for dump) w2k due to Kubuntu gave me grief with regards to the updater & add/remove programs kepts saying it was in use, even though I restarted my pc 3 times then also tried to 'kill/flush' the adept installer. Is there a bug with  sudo or adept with regards to kubuntu?
[09:22] <dwidmann> !adeptfix | susan
[09:22] <ubotu> susan: If Adept crashed on you and your database is locked, try this in konsole:  sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a 
[09:23] <mbdhboi> dwidmann did that yet it did nothing, strange thing is the lock file was 0bytes 'empty'.
[09:24] <dwidmann> interesting, what effect would rming the file have then?
[09:24] <markelhas> hi ppl
[09:24] <dwidmann> hiya
[09:24] <markelhas> i'm with a livecd in this momment
[09:24] <FireCrotc1> don't forget to say hi to the bots, markelhas :)
[09:25] <markelhas> an:)
[09:25] <mbdhboi> dwidmann that sounds like spanish to me when I don't speak spanish, no idea sorry.
[09:25] <markelhas> hi every one :P
[09:25] <baschdel> ahoi
[09:25] <mbdhboi> dwidmann just wondered if there was a bug with adept or sudo?
[09:25] <markelhas> yestarday i try to install ubuntu and every thing seams normal in the livecd, just like right now with livecd kubuntu
[09:26] <markelhas> but the problem is when i make the install the linux turn to a very very very slow machine
[09:26] <markelhas> the cpu jumps to 100% every time that i trie to run any app, like teminal
[09:27] <markelhas> and the boot process takes -+ 12 to 15 mins
[09:28] <markelhas> how can i install to my disk the livecd config that i'm using right now
[09:28] <markelhas> should i make some special config?
[09:29] <markelhas> any tips to solve this?
[09:34] <markelhas> anyone!?
[09:42] <owl> moin
[09:43] <owl> re
[09:43] <owl> aeh. arghs
[09:46] <aaaaaaaa> .
[09:50] <tid-wave> hello. is it worth installing the amd64 version ? I don't know if I need it.
[09:50] <owl> hmmm. one question: is there a way to select kernel-modules you want to load...?
[09:50] <obvio171> i installed rubygems through apt-get and when i install gems using "sudo gem install", they don't get added to the path, although they are at /var/lib/gems/1.8/gems/. Does anyone know what is the problem and how can i fix it without manually adding each gem to the path? Thanks!
[09:51] <llutz> tid-wave: if you don't know, you don't need :) only needed if you have >4GB RAM or need more interupts
[09:53] <Angelus> is there something in linux to take video of your pc? like screenshot but a video
[09:53] <llutz> Angelus: recordmydesktop
[09:53] <Angelus> ok :p
[09:56] <Angelus> thanks llutz
[09:57] <tid-wave> llutz: thanks for the information
[10:09] <markelhas> what value should i use for swap?
[10:11] <evri2> qtparted vs gparted.Which do you prefer?
[10:11] <llutz> cfdisk :)
[10:11] <Xplicit> evri2: theyre basically the same
[10:12] <rustalot> will gutsy use xorg 7.3?
[10:12] <llutz> rustalot: iirc not, 8.04 will
[10:12] <Xplicit> if im in kde ill go for qt if im in gnome id go with g
[10:15] <evri2> llutz: cfdisk ownz yea :p
[10:21] <rustalot> llutz: Hardy will also have KDE4 default, right?
[10:21] <llutz> rustalot: don't know
[10:21] <stdin> rustalot: nope
[10:22] <rustalot> darn
[10:22] <Miltos> hi ppl:-] 
[10:24] <Miltos> what's the application i've to use in kubuntu in order to create a photo cd/dvd?
[10:24] <bjwebb> hi
[10:26] <bjwebb> how do i make a script or app start automatically at boot?
[10:26] <Mr_Sonoma> Miltos, there are several i use dvdslideshow myself for picture slideshow dvd's
[10:28] <compilerwriter> !adept fix | compilerwriter
[10:28] <Miltos> Mr_Sonoma, thanks...i am just installing it via adept...
[10:28] <emilsedgh> bjwebb: I think the best way is to start it and make you computer how you really want to start-up like that and then save your session
[10:28] <bjwebb> emilsedgh: nah its a cli program
[10:29] <Mr_Sonoma> Miltos, its a command line program give me a sec and i'll give you a url to a wiki that has a how to
[10:29] <emilsedgh> bjwebb: so i dunno exaclty which is the best way to do it :)
[10:29] <Miltos> Mr_Sonoma, i wait...
[10:30] <llutz> Miltos: on getdeb.net you'll find "mandvd" and "manslide", they also create picture-dvds
[10:31] <melomane> is it possible to have a partition and mount it as home?
[10:31] <llutz> melomane: sure
[10:31] <melomane> llutz: i made a ext3 partition, and mounted it in as my home
[10:32] <llutz> melomane: copy all from /home to the new partition and edit /etc/fstab after that to mount that partition at /home
[10:32] <melomane> llutz: but i get this error: could not start kstartupconfig , check your installation
[10:32] <melomane> i get it when i want to log in to my user account
[10:32] <waylandbill> bjwebb: make an init script link to your script in the desired run level
[10:33] <melomane> and when i delete that line from fstab or mount it somewhere else, i can log in
[10:33] <compilerwriter> I have a broken sun-java6-plugin install according to adept.  What must I do to fix it?
[10:33] <llutz> melomane: you already copied your complete $HOME
[10:33] <llutz>  ?
[10:33] <melomane> llutz: i didnt get what u mean
[10:34] <Mr_Sonoma> Miltos, sorry i cant find where i had it bookmarked.
[10:34] <melomane> llutz: i just made a partition and mounted it in : /home/melomane
[10:34] <llutz> melomane: you need to copy the content of your actual home-dir to the new partition before mounting it
[10:34] <owl> someone has a hint for me?
[10:34] <Miltos> Mr_Sonoma, thanks any way...
[10:35] <melomane> llutz: there is only one folder "Desktop", i should cpoy it in my new partition?
[10:36] <llutz> melomane: there are hidden files/folders aswell
[10:36] <melomane> llutz: ahan yeah i forgot
[10:36] <llutz> melomane: cp -a ~ /media/your/new/partition
[10:36] <melomane> llutz: thanks , i will check for that
[10:37] <Miltos> bye ppl, thanks
[10:38] <melomane> llutz: another question about kubuntu, i have 2 dsl connections, i can connect to one of them without any problem ( i use ppoeconf) , but the other one, i cant. in plog i recieved: PAP authentication failed. but i can connect by this account in windows and opensuse
[10:38] <llutz> melomane: check username/password for that 2nd connection
[10:39] <melomane> llutz: they are correct. i conneted in windows and opensuse
[10:39] <llutz> melomane: maybe you have to put user/password into /etc/ppp/pap-secrets
[10:40] <melomane> llutz: does this file contains the passwords?
[10:40] <llutz> melomane: it's long ago i used it... yes, i think so
[10:41] <melomane> llutz: anyway, thanks a million
[10:41] <llutz> melomane: just edit the file as root, enter a line "  user * password  "    <- with your values
[10:42] <melomane> llutz: ahan, i will do that, thanks
[10:43] <rignes> What's the purpose of the UID's in the fstab?
[10:45] <emilsedgh> melomane: 'ahan' is sooo farsi :P
[10:46] <melomane> emilsedgh: i know, i just want to show the agreement
[10:46] <melomane> emilsedgh: ;)
[10:46] <emilsedgh> melomane: ;)
[10:47] <melomane> emilsedgh: thats nice, to find u here
[10:47] <melomane> emilsedgh: i got some advise, i wish they work
[10:48] <emilsedgh> melomane: :P
[10:49] <evri2> is it possible to use v4l2 in kopete?My webcam works on amsn but i want it to work on kopete.Because i do not like amsn :)
[10:49] <emilsedgh> melomane: yah I see, I hope they will work
[10:50] <ubuntu__> i hava a little problem, somebody can help me?
[10:51] <MarcC> how do I troubleshoot a locked sound device?
[10:51] <melomane> emilsedgh: r u online on all irc channels of freenode? :P
[10:59] <somiran> hi
[11:00] <somiran> help me i am new here
[11:00] <somiran> is this a chat room or a room for programmer
[11:02] <ScorpKing> just ask jour question.
[11:02] <somiran> i need a kubuntu alternate cd
[11:03] <ScorpKing> download it from the internet.
[11:03] <somiran> my speed is so slow
[11:03] <somiran> it will take about a day
[11:03] <ScorpKing> search for a comapny in ur country that will post it to you then.
[11:04] <somiran> can you tell mje some
[11:04] <somiran> i am in india
[11:04] <ScorpKing> sorry i don't know any. try google.
[11:05] <somiran> ok
[11:05] <somiran> bye every one
[11:05] <somiran> close
[11:06] <jhonyrod> somebody can help me?
[11:07] <unclephreak> anyone know if ubuntustudio is any good?
[11:08] <ScorpKing> no idea...
[11:08] <urli> hola
[11:08] <urli> hola a todos
[11:08] <unclephreak> im installing like 192 packages for it i hope its good...  hehe
[11:08] <urli> hola a todos
[11:09] <d0uglas> how can i get ssh to ignore an invalid key? it bails out on me saying someone might be up to something bad...
[11:09] <ryan_> Hello, Im trying to run adept updater and it is asking me to insert my Kubuntu 7.04 cd.  I have lost this cd since i installed is there away to get whatever it wants on the cd from the internet?
[11:09] <urli> hola
[11:09] <urli> como  estas
[11:09] <unclephreak> your sources are set for your cd
[11:09] <urli> de donde sos
[11:09] <urli> hablas esapol
[11:09] <urli> espaol
[11:09] <ryan_> Where can i change that unclephreak?
[11:10] <unclephreak> you need to go to your repositories and enable the universe and multiverse repos
[11:10] <ScorpKing> ryan_: /ets/apt/sources.list
[11:10] <ScorpKing> ryan_: /etc/apt/sources.list
[11:10] <ryan_> thanks
[11:10] <unclephreak> you should be able to do it through adept as well
[11:11] <urli> alguien habla espaol
[11:11] <urli> alguien habla espaol
[11:11] <urli> alguien habla espaol
[11:11] <urli> espaol
[11:11] <unclephreak> settings>repositories
[11:11] <ryan_> hm. multiverse and universe are uncommeted in sources.list, ill see what it says in adept.
[11:12] <d0uglas> ryanakca: what is you be fendin' to apt get?
[11:12] <unclephreak> oops, its adept>manage repositories
[11:12] <rnb> don't suppose anyone here know something about ati 9700 pro AIW card?
[11:13] <urli> hay alguien que hable espaol
[11:13] <urli> hay alguien que hable espaol
[11:13] <unclephreak> i use the mesa drivers for my ati card..  for some reason theyre the only ones i can get blender to run smoothly on
[11:13] <urli> hay alguien que hable espaol
[11:13] <urli> hay alguien que hable espaol
[11:13] <urli> hay alguien que hable espaol
[11:13] <urli> hay alguien que hable espaol
[11:13] <urli> hay alguien que hable espaol
[11:13] <urli> hay alguien que hable espaol
[11:13] <urli> hay alguien que hable espaol
[11:13] <tsdgeos> !es
[11:13] <ubotu> Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[11:13] <urli> hay alguien que hable espaol
[11:13] <tsdgeos> urli: PACIENCIA!
[11:14] <rnb> i've tried them but my card randomly locks up.
[11:14] <urli> hay alguien que hable espaol
[11:14] <tsdgeos> !es | urli
[11:14] <ubotu> urli: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[11:14] <unclephreak> mb have you tried it from source?
[11:15] <unclephreak> for some reason the mesa drivers didnt work for me so i got em from sourceforge
[11:15] <rnb> used the ones in feisty, tried the restricted and used envy to install i get the same results....no i haven't tried compiling my own yet
[11:16] <rnb> ok....all the drivers will work it is just the random freezes that are trying my patiences...ol
[11:17] <unclephreak> i see.  i dont know what to tell you, your card is brand new?
[11:17] <rnb> lol....hell no
[11:18] <rnb> but it works under winblows so i know itisn't hardware
[11:18] <unclephreak> well i guess the card isnt corrupt then
[11:19] <rnb> i'll try getting them from sourceforge...the build is only yesterday so not sure how ong it takes changes to get to the repository
[11:22] <aguitel> hello
[11:22] <mrksbrd> is there a shortcut to change desktop icon images?????
[11:24] <mrksbrd> what i am trying to specifically do is create a html shortcut and appy my own image to just that icon
[11:24] <unclephreak> left click the icon, properties then click the icon
[11:25] <mrksbrd> but under preview it is grayed out
[11:25] <aguitel> anyone helpme
[11:26] <aguitel> i have error when shutdown ,nothing happens
[11:26] <unclephreak> use ffmpeg to convert your file to a png image, or you can use gimp
[11:26] <mrksbrd> ok
[11:27] <unclephreak> aguitel what are you running?  feisty?
[11:27] <droach> anyone in here program in python
[11:28] <aguitel> yes feisty
[11:28] <unclephreak> does the shutdown menu even pop up when u select it?
[11:29] <unclephreak> i would try updating and try it again cos ive never heard of anything of the sort
[11:29] <aguitel> unclephreak ,how fix this error
[11:31] <unclephreak> i really  couldnt tell you without having more info man
[11:32] <Angelus> what package i have to install to be able to make menuconfig?
[11:35] <adenicio> how to install pilots for konqueror?like for flash etc
[11:35] <Angelus> what package i have to install to be able to make menuconfig?
[11:36] <adenicio> how to install pilots for konqueror?like for flash etc
[11:36] <amigamia> is there anywhere fast one can download linuxmce?
[11:36] <amigamia> this torrent business is dead slow
[11:37] <inaety> hey when i try to replace beryl as my window manager i have none of the top part of the windows...X, maxmise, minimise...etc
[11:39] <amigamia> beryl is neat
[11:39] <amigamia> bbl
[11:42] <adenicio> how to install pilots for konqueror?like for flash etc
[11:42] <adenicio> how to install plugins for konqueror?like for flash etc
[11:42] <adenicio> how to install plugins for konqueror?like for flash etc
[11:46] <adenicio> how to install plugins for konqueror?like for flash etc
[11:48] <ScorpKing> try 'sudo aptitude search flash' to see if any flash packages is available
[11:53] <Ubuntiac> Anyone here have any ideas on getting both Nvidia-glx-new *and* Madwifi working together? Madwifi seems to need the restricted modules and Nvidia seems to need them to not be there...
[11:53] <adenicio> ScorpKing: there are some flash install but i dont tink there are for konqueror
[11:54] <inaety> adenicio: sudo apt-get install libflash-nonfree
[11:55] <inaety> Ubuntiac: i don't think nvidia depends on madwifi
[11:56] <adenicio> inaety: how to enbla the ver num key automatic when log in linux?
[11:56] <adenicio> i forgot how
[11:56] <martos> alguien que hable espaol?
[11:57] <tsdgeos> !es | martos
[11:57] <ubotu> martos: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda.
[11:57] <Ubuntiac> No Nvidia seems to conflict with Madwifi. When I install Nvidia (/restricted-modules), wifi stops working
[11:57] <martos> gracias!!
[11:57] <inaety> kcontrol/keyboard and mouse/turn on in NumLock on KDE startup
[11:57] <martos> thanks!!
[11:58] <inaety> adenicio: ^^
[11:58] <inaety> Ubuntiac: try uninstalling madwifi and then nvidia
[11:58] <adenicio> ok
[11:58] <adenicio> tanks
[11:58] <Ubuntiac> Inaety: Uninstall madwifi, then install Nvidia?
[11:59] <inaety> Ubuntiac: uninstall both, then install nvidia
[11:59] <jhutchins> !flash
[11:59] <ubotu> To install Flash see https://help.ubuntu.com/community/RestrictedFormats/Flash - Flash 9 is now available in dapper-backports and edgy-backports - See also !Restricted and !Gnash
[11:59] <adenicio> inaety: do u know any link to see if my graphic card is compat with copiz,beryl,xgl?just to see if i can get the 3d desktop
[12:00] <adenicio> i have a VIA
[12:00] <inaety> i've never heard of VIA, adenicio
[12:01] <ScorpKing> adenicio: then i don't know.
[12:01] <Ubuntiac> Inaety: K, uninstall both, then resinstall Nvidia, followed by re-installing linux-restricted-modules-2.6.22.10-generic (needed for Restricted Driver Manager)?
[12:02] <mneptok> adenicio: the Unichrome drivers for Linux do not support 3D, so no compositing for VIA users
[12:02] <adenicio> inaety:  jhutchins u all was on a break time or something u all pop up about the same time.my card is a via km400
[12:02] <adenicio> ok
[12:05] <adenicio> libflash-nonfree is it real non free? jhutchins?
[12:05] <hydrogen> its non free as in speech
[12:05] <hydrogen> its freeasinbeer
[12:05] <hydrogen> (tm)
[12:06] <adenicio> beer not free
[12:06] <ScorpKing> i can use w3m to access the web but konqueror says host not found. where do i start looking?
[12:07] <adenicio> u got firefox?
[12:07] <ScorpKing> no. can install it quickly.
[12:07] <adenicio> if its says the samething something wrong in your config for internet
[12:08] <ScorpKing> ok
[12:09] <adenicio> !aptfix
[12:09] <ubotu> If Adept crashed on you and your database is locked, try this in konsole:  sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a 
[12:10] <inaety_> Ubuntiac: sorry my internet died
[12:10] <inaety_> Ubuntiac: basically after everything is installed you are going to install your restricted modules and linux headers...then install nvidia-glx-xxxxxxx, and then make sure you configure your stuff that your card works...run nvidia-xconfig whatever and make sure the card is up and running in X or something.  then install madwifi...oh and make sure your system is fully updated.
[12:13] <Ubuntiac> Inaety: thx, I'll give that a go!
[12:13] <inaety_> Ubuntiac: good luck
[12:13] <Ubuntiac> Inaety: Thx
[12:13] <adenicio> inaetywhere do i go to scan for plugins?
[12:14] <inaety_> adenicio: settings, configure konqueror, plugins, scan for plugins...you won't learn if you don't try btw
[12:15] <ScorpKing> adenicio: thanks! firefox is online. :-D
[12:16] <adenicio> btw?i could find it but it juts i reinstall konqueror in french and everthing here look different
[12:16] <adenicio> ScorpKing: k
[12:17] <adenicio> inaety_: i mean i reinstall linux in french
[12:20] <adenicio> inaety_: how do i put linux back in english?
[12:21] <inaety_> adenicio: what do you mean
[12:21] <BluesKaj> adenicio, a hint , once you've installed flashplugin-nonfree, java-common & j2re1.4 , if you are using konq as a browser , choose defaults and all plugins should work
[12:22] <inaety_> adenicio: if you want konqueror in english uninstall the french one and then install the english one
[12:23] <Angelus> please i need help with this error http://rafb.net/p/zlXX5H51.html
[12:23] <adenicio> inaety_: sorry i mean i install linux in french can i put it in english without reinstalin?
[12:24] <inaety_> kcontrol > regions and language
[12:24] <eljefe> adenicio: you can change the language settings in the System Settings, from the KMenu
[12:25] <rustalot> I installed the Gutsy Kernel to make it work on my laptop (Inspiron 1420), and now it won't let me install 'build-essential'
[12:25] <inaety_> adenicio: then install a new language...english
[12:25] <inaety_> and then default it
[12:25] <eljefe> can anyone tell me, can I change the HAL/media manager rules to check if a program is already open before auto-running that same program?  and, how?
[12:25] <nosrednaekim> rustalot: unfortunately, you need to re-add the gutsy repositoreis and then get that.
[12:26] <eljefe> when i put in a CD, i don't always want it to open a new KAudioCreator
[12:26] <Angelus> BluesKaj: http://rafb.net/p/zlXX5H51.html
[12:28] <Sanne> Angelus: seems you need ncurses.h, it's in this package: libncurses5-dev
[12:28] <BluesKaj> Angelus, what were installing or changing ?
[12:29] <Angelus> BluesKaj: compiling a custom kernel lol
[12:29] <rustalot> When is Gutsy going to move into beta?
[12:31] <Angelus> nah BluesKaj , i compiled many kernels on gentoo, and i compiled one on kubuntu last time too, well anyways im used to blowing my system and re-install
[12:32] <adenicio> eljefe: i want everything in english menu etc
[12:32] <inaety_> eljefe: when you put in a camera or something disc usb stick, it should ask you what you want to do with it...you can click on settings from there
[12:35] <eljefe> inaety_: i know but i already have selected 'open kaudio'... but i don't want it to open a new one EVERY time...
[12:35] <eljefe> only those times when its not already running
[12:36] <DevideZero> i install correct my video driver and when i boot up i can get grapthic someone have idea why ?
[12:36] <owl> .oO( strange nicks )
[12:36] <Jork> Hello
[12:36] <Jork> Can anyone help me installing Deluge-torrent?
[12:37] <Jork> I cant find it in adept neither in synaptic