[12:04] bobbo, yes [12:04] n1ls will probably go with that then. Thanks === bobbo [n=bobbo@82-41-58-125.cable.ubr08.edin.blueyonder.co.uk] has left #ubuntu [] [12:04] ni1s, thats how the kernel auto starts kernel raid - it uses the fd partition type [12:05] bobbo, Is that only for root? [12:05] Jordan_U: never used that [12:05] Jordan_U: what shall i run? === jono [n=jono@ubuntu/member/jono] has joined #ubuntu [12:05] azi, Don't actually know what vnc server Ubuntu uses by default, you can cheat by ssh -X ing in and running "vino-preferences" [12:05] NeddySeagoon, problem is that last time I tried Ubuntu it failed to properly deteced my software raid, Gentoo does it perfectly === yakov [n=yakov@89-179-45-70.broadband.corbina.ru] has joined #ubuntu [12:05] nerd@nerdbook8:~$ echo "this is a test" > /dev/lp0 [12:05] bash: /dev/lpr: Permission denied [12:05] I'm having trouble running the live CD, I keep recieving an error "can't access tty; job control turned off" (and I'm expecting that a ghost partition is the cause of it). I'm using an Acer Aspire 5920G with oem vistahh . === yakov is back [12:06] hello, I have some problems with a SATA HD, I have ubuntu installed on a one Hd but some days ago I bougth a new SATA hd, the problem is that I can't mount, it has 320 GB of capacity, but when I try to mount it ubuntu says that the capacity of my new hd is 128MG and I can't write enside of this.... what should I do ? === aricz_ [n=aricz@193.80-202-19.nextgentel.com] has joined #ubuntu [12:06] anyone have an idea to fix this === ShadowXP [n=ShadowXP@pool-71-104-126-9.lsanca.dsl-w.verizon.net] has joined #ubuntu === jexsie [n=jexsie@unaffiliated/jexsie] has joined #ubuntu [12:06] i followed the tutorial about how to reinstall grub, but it will not list my windows installation...what gives? [12:06] The workarounds from all 17 pages of community documentations gave me none. [12:06] guys, I have problems reading CPU temp and other sensor's data using GKRellm.. === craine [n=craine@202.80.46.123] has joined #ubuntu [12:06] maybe it's outdated software for this purpuse? [12:06] I have Feisty [12:06] ni1s, you can use mdadm to start your raid, if it fails to auto start [12:07] nerdboy1024, Be very careful with sending things directly to hardware... but it would be "echo this is a test | sudo tee /dev/lp0" [12:07] <^woznihack^> good night [12:07] under winecfg's audio tab, I can't see my Audigy 2 ZS (it should be under OSS Drive) === bob198125 [n=chatzill@216.230.150.13] has joined #ubuntu [12:07] NeddySeagoon, yes, if I stop the assembled raid(from autodetect), remove it, the create it with mdadm, pain to do this every time I reboot thou [12:08] Y_O_U_, , Try installing konq and see if it works === Gibb`s [n=selmac@ALille-252-1-14-36.w83-192.abo.wanadoo.fr] has joined #ubuntu [12:08] what would happen if i chmod /dev/lp0 [12:08] how do i unzip .zip file in ubuntu ? [12:08] whats the command to see hardware? [12:08] west, double click it === channel200 [n=channel2@S010600134688d8ab.cg.shawcable.net] has joined #ubuntu === Cbrown1023_away [n=Cbrown10@wikimedia/Cbrown1023] has left #ubuntu [] === idaho45 [n=idaho@190.75.104.119] has joined #ubuntu [12:08] I can install ubuntu to a thumbdrive, cant I? === superman [n=rob@host217-43-136-220.range217-43.btcentralplus.com] has joined #ubuntu [12:08] chmod 777 /dev/lp0 [12:08] pvl1, lspci, lshal, lshw [12:09] ty Jordan_U === KlrSpz [n=johng@66-193-248-206.static.twtelecom.net] has joined #ubuntu [12:09] robert_, Yes [12:09] Jordan_U, I thought so. [12:09] Jordan_U: error: the utility unzip is not in your PATH [12:09] ni1s, You need the raid personalities in your kernel/initrd for autodetect to work and the partition types that go into the raid must be fd [12:09] is it safe to remove all files in: /var/cache/apt/archives [12:09] Jordan_U, then why does Setup always want to select the primary IDE disk on the laptop? === mjancaitis [n=The_Prof@c-76-31-12-110.hsd1.tx.comcast.net] has joined #ubuntu [12:10] !ubuntu [12:10] Ubuntu is a complete Linux-based operating system, freely available with both community and professional support. It is developed by a large community and we invite you to participate too! - Also see http://www.ubuntu.com [12:10] !nvidia [12:10] hey webcams dont seem to be working on kopete? any ideas? [12:10] To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto [12:10] !ati === FrancoGG- [n=Franco@wikimedia/FrancoGG] has joined #ubuntu === MikeB [n=dbasinge@ubuntu/member/MikeB-] has joined #ubuntu === channel200 [n=channel2@S010600134688d8ab.cg.shawcable.net] has joined #ubuntu [12:10] hello, I have some problems with a SATA HD, I have ubuntu installed on a one Hd but some days ago I bougth a new SATA hd, the problem is that I can't mount it, it has 320 GB of capacity, but when I try to mount it ubuntu says that the capacity of my new hd is 128MG and I can't write enside of this.... what should I do ? === jrails [n=jhicks@static-90.arnlr.cteh.com] has joined #ubuntu [12:10] jordan_u: i am presuming you mean konqeror? [12:10] robert_, You shouldn't use the regular installer for installing to a thumb drive, it will be too big and will wear out the drive quickly [12:10] Y_O_U_, Yes === Bo [n=gilmaire@88.122-241-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu === sc0tty [n=yann@host217-39-179-185.in-addr.btopenworld.com] has joined #ubuntu === Bo [n=gilmaire@88.122-241-81.adsl-dyn.isp.belgacom.be] has left #ubuntu ["Ex-Chat"] === kion [n=mamounic@87-194-105-30.bethere.co.uk] has joined #ubuntu === francesco_ [n=francesc@host86-139-93-31.range86-139.btcentralplus.com] has joined #ubuntu === tub3r [n=tbr@c-69-243-138-228.hsd1.in.comcast.net] has joined #ubuntu [12:11] fghfghfghfghfghfg [12:12] Jordan_U, what should I use? Im not planning on using it as a restore install === afterlife [n=afterlif@host206-245-dynamic.1-79-r.retail.telecomitalia.it] has joined #ubuntu === Drevor [i=Drevor99@p54B3D274.dip.t-dialin.net] has joined #ubuntu [12:12] e.g. "omg virus infested windows drive" === robbster3 [n=james@dsl-241-50-217.telkomadsl.co.za] has left #ubuntu [] [12:12] robert_, https://wiki.ubuntu.com/LiveUsbPendrivePersistent [12:12] ah ta === lizor [n=liz@zeus.twistedpair.cc] has left #ubuntu [] [12:13] why https though? [12:13] NeddySeagoon, right, though maybe giving the kernel md=/dev/md1,/dev/hda3,/dev/hdb4 (or whatever) would work [12:13] robert_, I don't know, wiki.ubuntu.com just likes https :) === dulinnor [n=jorge@pc-112-69-104-200.cm.vtr.net] has joined #ubuntu [12:13] ni1s, maybe - as you say, it justworks in Gentoo === Krumar [n=Krumar@resnet-237-220.resnet.umbc.edu] has joined #ubuntu === nvrpunk [n=nvrpunk@81.90.21.227] has joined #ubuntu [12:14] how do I remove files below a certain size, say 1 meg? === Megaqwerty [n=megaqwer@unaffiliated/megaqwerty] has joined #ubuntu === gcarrillo [i=gcarrill@nat/sun/x-969f53349e85d95f] has joined #ubuntu [12:14] ni1s, check the raid stuff in /usr/src/linux/Documentation if you have kernel sources === [LUCIAN] [n=IndyLuci@cpe-24-166-5-163.indy.res.rr.com] has joined #ubuntu [12:14] NeddySeagoon, yeah, doing that now, thanks [12:14] I've added key authentication to my ssh server, but can still log in without the key using the password of the account. How can I fix this? [12:14] hello, I have some problems with a SATA HD, I have ubuntu installed on a one Hd but some days ago I bougth a new SATA hd, the problem is that I can't mount it, it has 320 GB of capacity, but when I try to mount it ubuntu says that the capacity of my new hd is 128MG and I can't write enside of this.... what should I do ? === staehrmedia [n=chatzill@CPE-76-84-196-91.neb.res.rr.com] has left #ubuntu [] === FrancoG3 [n=Franco@wikimedia/FrancoGG] has joined #ubuntu [12:15] hey webcams dont seem to be working on kopete? any ideas? [12:15] ni1s It may be in /usr/src/linux/Documentation/kernel-parameters.txt [12:15] <[LUCIAN] > its a bird, its a plane === d3x7r0 [i=dont@84.90.228.100] has joined #ubuntu === dcp [n=dcp@i202-75-117-118.us.catvmics.ne.jp] has joined #ubuntu [12:16] Y_O_U_, Slow connection installing konq or just doing something else? === mjancaitis [n=The_Prof@c-76-31-12-110.hsd1.tx.comcast.net] has left #ubuntu [] === AnRkey [n=AnRkey@87-194-62-131.bethere.co.uk] has joined #ubuntu [12:16] NeddySeagoon, been poking around in Documentation/md.txt [12:16] <[LUCIAN] > superman, try updating? [12:16] ni1s, thats another good source [12:17] jordan_u: slow user :) just figuring out how apt-get works, im used to doing this stuff from sorce [12:17] *source === WaltzingAlong [n=krugerk@h75-100-208-227.75-100.unk.tds.net] has joined #ubuntu === wiscados [n=magnus@81.25.184.155] has left #ubuntu [] [12:17] !apt | Y_O_U_ [12:17] Y_O_U_: APT is the Advanced Package Tool, which together with dpkg forms the basic Ubuntu package management toolkit. Short apt-get manual: https://help.ubuntu.com/community/AptGetHowto - Also see !Synaptic (Gnome) or !Adept (KDE) === Empus [n=empus@akl.hostsmart.co.nz] has joined #ubuntu === thedash [n=zero@CPE-24-163-211-179.kc.res.rr.com] has joined #ubuntu [12:18] Is there a boot command for the Feisty live CD to skip the first partition and move onto one that is accessible? [12:18] Y_O_U_, All you really need to start is "apt-cache search " and "sudo apt-get install " dependencies as I'm sure you know are dealt with automatically === tatters [n=test@AC9F1F81.ipt.aol.com] has left #ubuntu ["Kopete] [12:18] hello, I have some problems with a SATA HD, I have ubuntu installed on a one Hd but some days ago I bougth a new SATA hd, the problem is that I can't mount it, it has 320 GB of capacity, but when I try to mount it ubuntu says that the capacity of my new hd is 128MG and I can't write enside of this.... what should I do ? [12:18] !aptitude | Y_O_U_ [12:18] Y_O_U_: aptitude is another terminal-based front-end to APT, like apt-get. However, aptitude can remember the dependencies installed with a package and remove them if you uninstall. See https://help.ubuntu.com/community/AptitudeSurvivalGuide === Abu_Hamza [n=ad@87.109.217.105] has joined #ubuntu [12:19] jordan_u: gracias. its installing now, although its saying its got two hours to go === kdean06 [n=kdean06@fsf/member/kdean06] has joined #ubuntu [12:19] yo [12:19] walzingalong: thanks === secleinteer [n=scl@adsl-70-237-142-104.dsl.stlsmo.sbcglobal.net] has joined #ubuntu === djenane [n=djenane@41.201.227.221] has joined #ubuntu [12:19] ubotu !aptitude is "aptitude is another terminal-based front-end to APT, like apt-get. See https://help.ubuntu.com/community/AptitudeSurvivalGuide [12:19] I've added key pair authentication to my ssh server, but can still log in without the private key using the password of the account. How can I fix this? [12:19] on a related note - is it possible to recompile the apache I apt-got (with aptitude) to add some modules in? [12:19] <[LUCIAN] > msg, is it formatted ntfs? [12:19] <[LUCIAN] > mag* === kdean06 [n=kdean06@fsf/member/kdean06] has left #ubuntu ["Free] [12:20] !alsa-oss [12:20] Sorry, I don't know anything about alsa-oss - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi === Jacek_Kendysz [i=Jacek_Ke@unaffiliated/JacekKendysz] has joined #ubuntu [12:20] !alsa [12:20] If you're having problems with sound, first ensure ALSA is selected, by double clicking on the volume control, then File -> Change Device (ALSA Mixer). If that fails, see https://help.ubuntu.com/community/Sound - https://help.ubuntu.com/community/SoundTroubleshooting - http://alsa.opensrc.org/index.php?page=DmixPlugin - For playing audio files, see !Players and !MP3 === CaBlGuY [n=none@cpe-071-068-076-032.carolina.res.rr.com] has left #ubuntu [] === thully [n=thully@southquad-187-17.reshall.umich.edu] has joined #ubuntu [12:20] does anyone know if the 7.04 kernel has tun/tap enabled? [12:20] maek: I don't believe it does by default === Pici [n=Pici@ool-4355be00.dyn.optonline.net] has joined #ubuntu === flame [n=flame@80.240.217.51] has joined #ubuntu [12:20] maek: trying to set up hamachi? === JosephW__ [n=jircii@pool-72-77-121-14.pitbpa.east.verizon.net] has joined #ubuntu === osxdude|laptop [n=osxdude@adsl-76-238-93-141.dsl.emhril.sbcglobal.net] has joined #ubuntu [12:21] <[LUCIAN] > mag_, if its formatted NTFS, then install ntfs-3g package (sudo apt-get install ntfs-3g) [12:21] GarethAdams, Yes, let me get you a link [12:21] Megaqwerty: vpnc === mon^rch [n=anonymou@S0106000fea33f1bb.cg.shawcable.net] has joined #ubuntu === emile_ [n=emile@cp665411-a.dbsch1.nb.home.nl] has joined #ubuntu === madmetal_spyros [n=madmetal@ppp118-188.dsl.hol.gr] has joined #ubuntu [12:21] GarethAdams, http://www.debian.org/doc/manuals/apt-howto/ch-sourcehandling.en.html [12:21] maek: I see. === madmetal_spyros [n=madmetal@ppp118-188.dsl.hol.gr] has left #ubuntu ["Leaving"] [12:21] maek: i think so [12:21] Megaqwerty: is there a way I can test, or a module I can apt add? === nnutter_ [n=nak@D-128-208-60-167.dhcp4.washington.edu] has joined #ubuntu [12:22] WaltzingAlong: any way to test? I dont see anything from lsmod |grep tun or tap [12:22] maek: well, give me a sec...I'll check [12:22] Megaqwerty: thanks === Evanlec [i=evan@c-75-67-237-157.hsd1.nh.comcast.net] has joined #ubuntu === preaction [n=doug@71-86-227-90.static.mdsn.wi.charter.com] has joined #ubuntu [12:22] Megaqwerty: im sorry [12:22] as soon asn I fired up the vpnc for the second time it loaded tun === casaschi [n=paolo@82-69-35-173.dsl.in-addr.zen.co.uk] has joined #ubuntu [12:22] Jordan_U: thanks [12:22] maek: ah, cool [12:23] WaltzingAlong: you were right. its there. Thanks. === StoneNote [n=StoneNot@unaffiliated/stonenote] has joined #ubuntu [12:23] Megaqwerty: thanks agian. === SireeBob [i=SireeBob@unaffiliated/sireebob] has joined #ubuntu [12:23] can i start a firefox session that when i close, doesn't remember the cached pages or search strings that i used? [12:23] maek: great. well i am using it anyway ;) [12:23] Would I have better performance/luck with Ubuntu on an Intel Core 2 Duo going with i386 or AMD64? [12:23] GarethAdams, np, and that will let you built it into a real .deb, not a non standard dependency missing one like checkinstall does [12:23] <[LUCIAN] > Abu_Hamza, get DemocraKey [12:24] Abu_Hamza: You could make a separate profile that always deletes its history and stuff, I guess [12:24] apo_: how can i create a profile? === casaschi [n=paolo@82-69-35-173.dsl.in-addr.zen.co.uk] has joined #ubuntu === packetscan [i=Tsu@srv01.packetscan.com] has joined #ubuntu === SpudDogg [n=spuddogg@c-76-109-159-194.hsd1.fl.comcast.net] has joined #ubuntu === pearlbear [n=mpm@72.170.214.38] has joined #ubuntu === casaschi [n=paolo@82-69-35-173.dsl.in-addr.zen.co.uk] has left #ubuntu [] [12:24] SireeBob, x86 is less work, and 64 bit is not much use on a Desktop currently [12:24] Abu_Hamza: Dunno, man firefox === Excalibas [i=Excaliba@85.138.50.179] has joined #ubuntu === crabgrass [n=dissonan@69-12-177-161.dsl.dynamic.sonic.net] has joined #ubuntu === shadhoe [n=brandon@c-75-65-212-167.hsd1.ms.comcast.net] has joined #ubuntu [12:24] woman firefox [12:24] Jordan_U: Would it make a difference if I had 4GB+ of RAM? [12:25] Hello, all. I was wondering if anybody could help me with a basic question regarding setting up a dual-book Macbook Pro and how to install BootCamp. Most of the instructions I've been following in the forums and on the Wiki say "install Bootcamp" and then "shrink the Mac partition." However, I'm not sure if that means the partition I create in Bootcamp will be the one I am using to install Ubuntu, or if I'm just ultimately [12:25] creating an empty partition (I don't have Windows) and then shrinking the Mac partition to create unpartitioned space. === Nalleman [n=bjorn@nl112-169-30.student.uu.se] has joined #ubuntu === harmental [n=ricardo@AGrenoble-152-1-71-248.w86-193.abo.wanadoo.fr] has joined #ubuntu [12:25] <[LUCIAN] > Abu_Hamza, man firefox is what you type in a terminal to get the manual [12:25] if i already have a partition that mounts to /home and i have another drive with another partition, can i hack together some kinda software raid to point them both at /home ? [12:25] What [LUCIAN] said :P === bluequijote [n=chatzill@user-10cm35j.cable.mindspring.com] has joined #ubuntu === Timbooooo [n=Goatsex@adsl-76-192-229-166.dsl.austtx.sbcglobal.net] has joined #ubuntu [12:25] <[LUCIAN] > :] [12:26] WaltzingAlong: are you using vpnc? [12:26] SireeBob, Yes, though the server kernel can handle 4+ GIG even on x86, the "generic" kernel cannot [12:26] maek: openvpn === sterling [n=sterling@c-76-116-71-115.hsd1.nj.comcast.net] has joined #ubuntu === biouser [n=biouser@adsl-074-246-157-002.sip.asm.bellsouth.net] has joined #ubuntu === saxartist [n=sax@72.28.254.38] has joined #ubuntu [12:26] if u got 4gb+ ram then...you're probably on a server already === Dante123 [n=dante123@142.46.143.38] has joined #ubuntu [12:26] does anyone know how to play a video? [12:26] WaltzingAlong: ah, thanks. [12:26] double click on it? [12:27] JosephW__, I have a macbook pro, you are just going to overwrite the partition that boot camp makes for "windows" === sterling is now known as sterling2 [12:27] hey, how do you get into the calendar with evolution? [12:27] Is it necessary to get an "Intel-optimized" kernel in order to get good performance with an Intel Core 2 Duo? Somebody I've talked to insists that I need to do that, or compile my own.. [12:27] lol [12:27] hi, i wounder if its possible to rename a mp3 player, a usb device so that they get specific names instead of just "disk" or "disk-1" when mounted? [12:27] press play === Shadowpillar [n=ShadowXP@pool-71-104-126-9.lsanca.dsl-w.verizon.net] has joined #ubuntu [12:27] :P [12:27] JosephW__, Be ware of old / innacurate guides though [12:27] SireeBob, good question [12:27] I was just showing a Windows user how to get help... thought the video comment would be funny === clearzen [n=clearzen@c-67-172-249-29.hsd1.ut.comcast.net] has joined #ubuntu [12:27] Nalleman: You could probably create an udev rule for it [12:27] Nalleman, There are a few ways to do that [12:27] Jordan_U: I'm looking at the MacbookProFeisty wiki page. === hyperbola_ [n=hyperbol@adsl-76-216-123-43.dsl.covlil.sbcglobal.net] has joined #ubuntu === reacocard [n=reacocar@WL-193.CINE.HMC.Edu] has joined #ubuntu [12:28] love you guys, see ya' later [12:28] hey, how do you get into the calendar with evolution? === rafaelscj [n=rafaelsc@201.32.23.7] has joined #ubuntu [12:28] Jordan_U, ok, do you know any of them? ;) === twp [n=twp@96.102.98-84.rev.gaoland.net] has joined #ubuntu [12:28] does anyine know if there is any linux-native homework planners/trackers? [12:28] Nalleman, Give it a device label, manually make a udev rule, or right click it on the desktop and look in properties in Gnome === nesta [n=nesta@crb44-2-82-227-208-243.fbx.proxad.net] has joined #ubuntu [12:28] ctrl 3....thanks [12:28] reacocard: i use openoffice's spreadsheet [12:29] reacocard: something like freemind? or kdissert? [12:29] reacocard: check out mozilla's sunbird === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has joined #ubuntu [12:29] apo_, Jordan_U whats a udev rule? [12:29] reacocard: it's a calendar app, but should work well [12:29] Jordan_U: It's also unclear because it says to install rEFIt, but I thought that was only necessary if triple-loading. [12:29] if I wanted a calendar I'd just use google calendar, I'm looking for something more-desgined for homework specifically [12:29] JosephW__, It isn't ever needed, it's just nice to have :) [12:30] anyone used the dildo browser? === sterling2 [n=sterling@c-76-116-71-115.hsd1.nj.comcast.net] has left #ubuntu ["Ex-Chat"] [12:30] Nalleman: udev is a device manager, it adds links to the devices in /dev and can execute commands when a certain device is connected to the PC === KlrSpz [n=johng@66-193-248-206.static.twtelecom.net] has left #ubuntu [] [12:30] reacocard: oh, never mind then === mode/#ubuntu [+o ompaul] by ChanServ === mode/#ubuntu [-b *!*@75.80.5.221!#ubuntu-read-topic] by ompaul === mode/#ubuntu [-o ompaul] by ChanServ [12:30] JosephW__, Otherwise you have to hold down option at boot to boot Ubuntu, and it shows up as "Windows" [12:30] basically, something that takes assingments, has start/end dates, and allows assinging importance, difficutly, etc === rmonnerat [n=monnerat@189.25.204.178] has joined #ubuntu [12:30] And you can configure it with rules === IrCYop [i=Administ@216-55-203-214.static.mts.net] has joined #ubuntu === stefg [n=stefg@e179145199.adsl.alicedsl.de] has joined #ubuntu === mark__ is now known as mapp === necronekostar [n=starz@unaffiliated/databuddy] has joined #ubuntu [12:30] o: [12:30] ty ompaul [12:30] np === crabgrass [n=dissonan@69-12-177-161.dsl.dynamic.sonic.net] has left #ubuntu [] [12:31] does anyone know anything about getting an "intel optimized" kernel for ubuntu? [12:31] How do I start X in the ubuntu consol [12:31] hmmm anyone know why I have to reinstall ALSA everytime I boot my computer if I want sound? [12:31] apo_, ok. I guess i will have to look at this further tomorrow. Thank you anyway. [12:31] hey ompaul out of curiosity [12:31] IrCYop: startx [12:31] you're welcome [12:31] IrCYop: startx [12:31] i noticed the irc council got approved - but two year terms? [12:31] Bleh. [12:31] !generic | Evanlec [12:31] Evanlec: Background to the decision to replace -686, k7 and -smp kernels with -generic can be found here https://lists.ubuntu.com/archives/ubuntu-devel/2006-August/019983.html (the -386 kernel is still available if needed) [12:31] thats really long in irc years [12:31] Evanlec: for the most part it may not be worth it [12:31] WaltzingAlong, err gnome === Dead_James [n=brandon@c-68-34-224-91.hsd1.md.comcast.net] has joined #ubuntu [12:31] WaltzingAlong, why not? [12:31] necronekostar, in a pm [12:31] is there a volume control besides alsamixer in ubuntu? [12:31] I've added key pair authentication to my ssh server, but can still log in without the private key using the password of the account. How can I fix this? === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has left #ubuntu [] [12:32] !volume [12:32] Sorry, I don't know anything about volume - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [12:32] ionstorm, the sites still rockin... nice work :) === NoWay [n=dfsv@201.3.78.205] has joined #ubuntu [12:33] spud : try type mixer in synaptic search [12:33] Evanlec: read the link from ubuto === IrCYop [i=Administ@216-55-203-214.static.mts.net] has left #ubuntu ["Leaving"] [12:33] gotcha [12:33] !generic | Evanlec [12:33] Evanlec: Background to the decision to replace -686, k7 and -smp kernels with -generic can be found here https://lists.ubuntu.com/archives/ubuntu-devel/2006-August/019983.html (the -386 kernel is still available if needed) [12:33] Megaqwerty: i think this is intended behaviour.... man opsnnh-server ? [12:33] /leave [12:33] i have some gutsy packages installed.How can i install feisties again?I cannot remove them because if i try to do,it will remove nearly 1200 packages. === twp [n=twp@96.102.98-84.rev.gaoland.net] has left #ubuntu [] [12:33] i needed to install alsa 1.0.1.4 and it was avaliable in gutsy.So i only installed alsa but i think it installed/upgraded some of other packages forexample libc6. === apo [n=apo@dslb-088-065-220-101.pools.arcor-ip.net] has joined #ubuntu [12:33] *openssh-server [12:33] evri2: sudo apt-get install package/feisty I believe [12:33] stefg: that makes no sense...I was looking at having no access to the server without using the key pair.... [12:33] evri2, it would have [12:34] evri2: may have to do them all one one apt line to avoid complaints [12:34] Jordan_U: Thanks for the help! Sometimes, it seems like there's a gap in the basic basic basic install info, so having people like you involved really helps. === necronekostar [n=starz@unaffiliated/databuddy] has left #ubuntu ["Leaving"] === tombar [n=tombar@r190-64-180-156.dialup.adsl.anteldata.net.uy] has joined #ubuntu === rafaelscj [n=rafaelsc@201.32.23.7] has left #ubuntu [] === starscalling [n=starz@unaffiliated/starscalling] has joined #ubuntu === emile [n=emile@cp665411-a.dbsch1.nb.home.nl] has joined #ubuntu === starscalling is now known as nekostar === rafaelscj [n=rafael@201.32.23.7] has joined #ubuntu === Dante123 [n=dante123@142.46.143.38] has left #ubuntu [] [12:35] JosephW__, Np, and know that so far macbook pro support is becoming a lot better in Gutsy :) [12:35] How can i find all files in my home that have the world "primo" === Nighthawk420 [n=nighthaw@74-138-185-56.dhcp.insightbb.com] has joined #ubuntu [12:35] hey everyone [12:35] NoWay, Edit in what way? === Lipe_ [n=Lipe_@132-3-235-201.fibertel.com.ar] has left #ubuntu ["Ex-Chat"] [12:36] Megaqwerty: as i understand it key pairing makes it possible to login without password, but is not intended to /prevent/ it. i recently read an article on linuxtoday.com about how to shut down ssh logins after three failed attempts, so i don't know if that's possible at all [12:36] i think i have found a fix for my problem online il tell yall later if it fixed my x server problem on first boot === ubuntu [n=ubuntu@206.255.220.234] has joined #ubuntu [12:36] If I configure my xorg file to use higher resolutions it still won't let me choose them in gnome. How can I fix this? [12:36] last time i installed ubuntu i had to do something to get the volume louder...now i cant remember what it was. any help? [12:36] reacocard: i try to downgrade libc6 and it says that it need to delete 551 packages which includes kdm. === macogw [n=maco@unaffiliated/macogw] has joined #ubuntu [12:36] how do i check /dev/hda1 for errors and fix thm ifpossible [12:36] stefg: dang it. I mean, I use fail2ban for banning attempts but was really interested in making it impossible. :( [12:37] is there a package for Perl;:DBI ? [12:37] evri2: yeah as I said, you'll have to do them on one apt line, or start with the top levels and try to work your way down [12:37] SpudDogg: use the volume applet? [12:37] NoWay: try a program like searchmonkey you can search for files containing something [12:37] there are quite a few dbi packages [12:37] !vnc [12:37] VNC is a protocol for remote desktop. https://help.ubuntu.com/community/VNCOverSSH describes how to use it securely. It works best over fast connections, otherwise look at !FreeNX [12:37] jordan_U: for the record, works fine with konqueror, so something is botched with firefox apparently (pretty strange on a fresh install though). thought you might want to know. thanks for the help, i appreciate it === phyre [n=jaco@82-35-34-69.cable.ubr01.camd.blueyonder.co.uk] has joined #ubuntu [12:37] zegevrijtt hmm ty man === At0mic_PC [n=arch_ato@host-216-78-69-182.jan.bellsouth.net] has joined #ubuntu [12:37] ubunteroAR, what volume applet? [12:37] can someone tell me the name of a good screenshot program? [12:38] how do i check and fix errors on the /dev/hda1 [12:38] !find vnc [12:38] Found: libvncauth-dev, libvncauth0, libvncserver-dev, vnc-common, xvncviewer (and 18 others) [12:38] azi: yes [12:38] Megaqwerty: i'm by no means an ssh expert, so don't feel discouraged to further investigate [12:38] azi: i use ksnapshot [12:38] SpudDogg: are you using gnome? right-click on a panel and Add Applet and find the volume applet [12:38] Y_O_U_, Please report it as a bug, and include the other tests so it is clear it is not pebkac, it is such a strange error it is hard to believe :) [12:38] reacocard: i didn't installed all the gutsy packages.I think when i upgrade to kde 3.5.7 a new libc6 installed,too.How can i reinstall a package from specific repo? [12:38] stefg: believe me, I don't give up that easily :-P thanks for your help though === pKracy [n=lukasz@33.29.pxs.pl] has joined #ubuntu === ericx [n=jxtadev@14.64.177.60.broad.hz.zj.dynamic.163data.com.cn] has joined #ubuntu === pKracy [n=lukasz@33.29.pxs.pl] has joined #ubuntu === phyre [n=jaco@82-35-34-69.cable.ubr01.camd.blueyonder.co.uk] has joined #ubuntu === SmoothOp [n=no@c-71-58-57-168.hsd1.pa.comcast.net] has joined #ubuntu [12:39] can someone please tell me how to check the /dev/hda1 for errors and fix it [12:39] evri2: same way, or for a specific version, do packagename=version instead, but its all manual, I know of no way to make them all downgrade automatically === kitche [n=dragon@pool-141-149-155-123.buff.east.verizon.net] has joined #ubuntu [12:40] Can I install a 32-bit kernel and use the same filesystem? Is there some way of monkeying with the libraries and binaries so I only have the minimum amount of duplication? === ubuntu09 [n=ubuntu@c-68-35-90-204.hsd1.nm.comcast.net] has joined #ubuntu [12:41] ubuntu: what is on /dev/hda1 ? which filesystem, and what mountpoint? === tinin [n=tinin@133.Red-83-33-244.dynamicIP.rima-tde.net] has joined #ubuntu [12:41] hey stefg [12:41] i think this might work as far as fixin my problem [12:41] http://ubuntuforums.org/archive/index.php/t-489644.html [12:41] reacocard: is there a command to view all avalaible versions? [12:42] evri2: apt-cache madison packagename === blenderhead001 [n=blenderh@adsl-070-145-184-070.sip.jax.bellsouth.net] has joined #ubuntu [12:42] stefg: its the ubuntu and its fully installed btu has a bios bug and icant doanythng i tried to resize to do partitions but it said i need to check the /dev/hda1 for errors and fix if possible === linux_kid [n=kevin@ip68-228-191-75.cl.ri.cox.net] has joined #ubuntu [12:42] Wich remote desktop software would you recommend me? === vale0145 [i=vale0145@orchid.itlabs.umn.edu] has joined #ubuntu [12:43] jordan_u: i agree, very strange. there an official way through ubuntu to report bugs? [12:43] what's a remote desktop? === amr [n=amr@88.Red-83-54-23.dynamicIP.rima-tde.net] has joined #ubuntu === egos_ [n=egos@host12-203-dynamic.12-79-r.retail.telecomitalia.it] has joined #ubuntu [12:43] !launchpad | Y_O_U_ [12:43] Y_O_U_: launchpad is a collection of development services for Open Source projects. It's Ubuntu's Bounty and Bug tracker, and much more; see https://launchpad.net/ === mon^rch [n=anonymou@S0106000fea33f1bb.cg.shawcable.net] has joined #ubuntu [12:44] !bugs | Y_O_U_ [12:44] Y_O_U_: If you find a bug in Ubuntu or any of its derivatives, please file a bug report at: http://bugs.ubuntu.com/ - Bugs in/wishes for the bots can be filed at http://launchpad.net/products/ubuntu-bots === petal [n=tobias@dslb-084-063-106-104.pools.arcor-ip.net] has joined #ubuntu [12:44] paddy_eire: thanks [12:44] Y_O_U_, The only automated / built in bug reporting is when an app crashes [12:44] Abu_Hamza: to connect to another pc, so you can see it's scrren and control it on a window on your pc [12:44] !kompozer [12:44] kompozer is a WYSIWYG HTML editor for easily creating web pages, and the continuation of the dead Nvu project. It will be in the Ubuntu repos for 7.10 ("gutsy"); meanwhile for other versions add the following to your /etc/apt/sources.list: "deb http://ppa.launchpad.net/tonyyarusso/ubuntu {dapper,edgy,feisty} universe" (pick your release and list it without brackets, and no quotes) [12:44] i see [12:44] ubuntu: so if it's the root filesystem you need to check it from a Live CD or some other external system. But before assuming anything and trying dangerous operations you should rather elaborate on what doesn't work and what errors you get [12:44] I have a comp with a 111.76gb fat32 filesystem with 91.24gb free space on /dev/sda, but Gparted will not shrink it to 60gb... any help? === Radis [n=benjamin@78.113.3.251] has joined #ubuntu === pi3 [n=sebas@13-196-17-190.fibertel.com.ar] has joined #ubuntu [12:45] jordan_u: thats what i was wondering. thanks again for the help. ill leave you alone, looks like you have your hands full ;) === Dante123 [n=dante123@142.46.143.38] has joined #ubuntu === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has joined #ubuntu [12:45] I've tried vnc and tightvnc, but I can't see nothing when connected [12:45] tinin, Using compiz? [12:45] stefg: i am onlive cd so what should u recommend i do now can u guide me [12:45] Jordan_U: not now, on kde it still sux a lot === du [n=tobias@e180046229.adsl.alicedsl.de] has joined #ubuntu === Broc223_ [n=greg@pool-71-244-100-133.phlapa.fios.verizon.net] has left #ubuntu ["Ex-Chat"] [12:46] hi all....trying to sync palm and evolution calendar....I get an error that says usbserial 'visor' kernel module is not loaded....how do I load it? [12:46] tinin, https://bugs.launchpad.net/ubuntu/+source/vnc/+bug/77442 === DtG [n=no@c-71-58-57-168.hsd1.pa.comcast.net] has joined #ubuntu [12:46] ubuntu: so if you want to check /dev/hda1 you can open a terminal, make sure that it is not mounted and run sudo fsck /dev/hda1 === reacocard [n=reacocar@WL-193.CINE.HMC.Edu] has left #ubuntu ["So] === Xorlev [n=raven@unaffiliated/xorlev] has joined #ubuntu === eyec0n [n=eyec0n@c-67-181-22-41.hsd1.ca.comcast.net] has joined #ubuntu === zitner [n=zitner@pool-72-82-195-86.cmdnnj.east.verizon.net] has joined #ubuntu [12:47] ubuntu: but if you have a bios issue that won't help in any way [12:47] this blows, my sound card was working when I booted up xubuntu earlier, but not it isn't working [12:47] Jordan_U: Interesting, another thing why compiz still seems alpha software [12:48] i didn't change any settings either [12:48] any ideas? [12:48] anyone know if theres an ubuntu repo for openarena 0.7? [12:48] eyec0n: grab from getdeb.net [12:48] Jordan_U: which program would you use? [12:48] stefg: its unmounted but keeps saying itsmounted ont he check [12:48] thanks! [12:48] tinin, It is stable but note that it still isn't even 1.0, so it is not feature complete yet [12:48] eyec0n: cha'ching! :) [12:49] Dante123: "sudo modprobe visor" [12:49] stefg: figured it out. I needed to add "PasswordAuthentication no" to /etc/ssh/sshd_config [12:49] ubuntu: simply type 'mount', this will give a list and you can see if it's mounted anywhere === mikebot [n=michaell@ip68-6-118-177.sb.sd.cox.net] has joined #ubuntu === Megaqwerty [n=megaqwer@unaffiliated/megaqwerty] has left #ubuntu ["thanks"] [12:49] question, why must it be fat, and not ext2? === DigitalCrypto [n=maxrisc@h460ae911.area7.spcsdns.net] has joined #ubuntu [12:49] How do I change the number of Desktops I have? Also, I turned on Desktop Effects, and the cube desktops thing was working, but now I cna't switch between them... [12:50] Megaqwerty: ahhh.... happy locking out yourself at some point :-) [12:50] robert_, Live pen drive? === scipio_ [n=c@cpe-75-85-206-61.dc.res.rr.com] has joined #ubuntu === AskHL [n=ask@82.211.198.209] has joined #ubuntu === orudie [n=orudie@12.109.182.132] has joined #ubuntu === loca|host [n=tux@196.203.53.221] has joined #ubuntu [12:50] stefg: it is named /media/disk hwo i unmount that === Relate [n=Stick@unaffiliated/relate] has joined #ubuntu === tatters [n=test@AC9F1F81.ipt.aol.com] has joined #ubuntu === bronz_ [n=Lester@c-24-63-145-27.hsd1.ma.comcast.net] has joined #ubuntu === clearzen [n=clearzen@c-67-172-249-29.hsd1.ut.comcast.net] has joined #ubuntu [12:51] ubuntu: sudo umount /dev/hda1 === DigitalCrypto looks around [12:51] robert_, syslinux won't boot from ext2 IIRC. the whole point is that it is only really using the Fat FIle system for a file called squashfs which is mounted as / in a live session [12:51] stefg: i tried to isntall xp on here and it said i need the drive to be a ntfs and its not ntfs [12:51] is there a download for gutsy yet === osxdude|laptop [n=osxdude@adsl-76-238-93-141.dsl.emhril.sbcglobal.net] has joined #ubuntu === mike_moose [n=mike@207.162.211.130] has joined #ubuntu [12:51] KevinOman: Yea, I think Tribe 4 is out. === mike_moose [n=mike@207.162.211.130] has left #ubuntu ["Leaving"] [12:51] Tribe 5 I believe it is [12:51] stefg: unmount command not found [12:52] does it have to be syslinux? can it be grub? [12:52] thanks mike bot [12:52] http://pastebin.com/m2e0ef221 trying to access my second drive give me error "hal-storage-fixed-mount refused uid 1000 [12:52] KevinOman: I mean tribe 5, sorry. [12:52] http://www.ubuntu.com/testing/tribe5 [12:52] ok [12:52] how do I get rid of the annoying gnome splash-screen, editing show_splash_screen with gconf-editor does not work [12:52] jesus... waltzing thanks for that url I cant believe I didn't know about this site already === Neoxygen [n=neoxygen@84-74-168-100.dclient.hispeed.ch] has joined #ubuntu [12:52] ubuntu: 1.) read again 2.) what does a xp install has to do with #ubuntu? [12:52] Gutsy requires semi daily updates ~200MB....if you are brave === Dante123 [n=dante123@142.46.143.38] has left #ubuntu [] [12:53] how do you change your default sound card? [12:53] How do I change the number of Desktops I have? Also, I turned on Desktop Effects, and the cube desktops thing was working, but now I cna't switch between them... [12:53] stefg: nothing i was just saying its why iw as trying ot do the partition but it wont let me [12:53] mike6546, asoundconf === zezom [n=zezom@203.84.71.241] has joined #ubuntu [12:53] stefg: its saying unmount is not a command [12:54] mikebot: CTRL ALL Left Click [12:54] ALT* [12:54] ubuntu: read again! it's *umount* [12:54] ah sorry [12:54] stefg === flame [n=flame@80.240.217.51] has joined #ubuntu === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has joined #ubuntu === flame [n=flame@80.240.217.51] has joined #ubuntu === pie-rate [n=ubuntu@cust-69-19-214-178.static.o1.com] has joined #ubuntu [12:55] DigitalCrypto: Yea, that isn't working when I turn Desktop Effects on. === liquidmtl [n=gary@66.232.104.231] has joined #ubuntu === dj_baggio [n=finarfin@yk66.internetdsl.tpnet.pl] has joined #ubuntu [12:55] lolz [12:55] I installed ubuntu on one of my systems the other day but then I swapped the cdrom out for a dvd rom but it still looks like ubuntu thinks that I have a cdrom installed. is there a way to update that sort of information so it can see that it is not a dvd? [12:55] thank you whoever told me that, it worked === _pb_ [n=aufegu@211.45.66.202] has joined #ubuntu [12:56] mikebot , try remove window switcher from taskbar , disable effects, then enable them again === inimesekene [n=sadsmile@80-235-69-228-dsl.trt.estpak.ee] has joined #ubuntu [12:56] m11: It was already removed prior to me turning the Effects on. [12:56] mikebot, put them back, set to 4 screens and try run efects ON === Soup_ [n=glenn@c-68-44-211-161.hsd1.pa.comcast.net] has joined #ubuntu [12:57] m11: OK, one second. [12:57] whose bright idea was it to put compiz on feisty stable? [12:57] i want to partition my new ubuntu install with a separate /home partition. i'm using a 250gb drive, so i need the sizes for swap, /, and /home. i have 1gb of ram, so 1.5gb swap? how much space does / need to have? i mean, right now my /home on my 60gb drive is 17gb, and / is using the rest of that space, which puts it at 40gb. === FrancoG3 is now known as FrancoGG [12:57] Anyone here use Avant Windows Manager Im getting a HUGE black bar across the bottom for some reason now? [12:57] stefg: this poped up whn i did the check Pass 1: Checking inodes, blocks, and sizes [12:58] DigitalCrypto: very rightful and intelligent question..... i guess it was the l33t h4xx0rs idea asking for new toys === Pelo [n=jean@mtl-pppoe-adsl889.securenet.net] has joined #ubuntu === MikeB [n=dbasinge@ubuntu/member/MikeB-] has joined #ubuntu [12:58] como faco pro meu vim recuar cada linha para o mesmo nvel da linha superior?? [12:59] m11: Hrm, very strange: WHen I turn the effects on, or enable the cube switcher, it changes my workspaces to only one, and whne I add more, it still acts as though there is only one. === preaction [n=doug@71-86-227-90.static.mdsn.wi.charter.com] has joined #ubuntu [12:59] !pt | NoWay [12:59] NoWay: Por favor use #ubuntu-br ou #ubuntu-pt para ajuda em portugus. Obrigado. [12:59] !es | NoWay [12:59] NoWay: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda. [12:59] u have to play with that options mikebot, that how i recoverd it several times [12:59] m11: Oh, no, when I add more I can switch through them, only not a cube (even when cube is on). === adamorjames [n=adamorja@ppp-70-244-173-194.dsl.rcsntx.swbell.net] has joined #ubuntu [12:59] mikebot, yes that's how it works when you switch sides of the cube that is your other workspace you get 4 [12:59] mikebot, You need to change it in gconf or compiz-settings-manager === BlankDenim [n=Blank@pool-71-118-75-156.lsanca.dsl-w.verizon.net] has joined #ubuntu === Shadowpillar [n=ShadowXP@pool-71-104-126-9.lsanca.dsl-w.verizon.net] has joined #ubuntu === greg [n=greg@125-239-88-7.jetstream.xtra.co.nz] has joined #ubuntu [01:00] !pt [01:00] Anyone here use Avant Windows Manager Im getting a HUGE black bar across the bottom for some reason now? [01:00] Jordan_U: Change what? [01:00] !pt | como faco pra meu vim recuar cada linha para o mesmo nvel da linha superior?? [01:00] como faco pra meu vim recuar cada linha para o mesmo nvel da linha superior??: Por favor use #ubuntu-br ou #ubuntu-pt para ajuda em portugus. Obrigado. [01:00] kitche: But it isn't spinning like a cube. [01:00] mikebot, Number of desktops [01:00] ah tah ;) [01:00] NoWay: type /j #ubuntu-br in your irc client# [01:00] Ok my problem, the power key (^) for the calculator that came with Ubuntu (gnome-calculator) does not work. [01:00] mikebot, you sure what does ctrl+alt+up arrow do for you [01:00] And what does CTRL + ALT + UP ARROW do? [01:01] haha [01:01] adamorjames, turn it over take off the back and put in new batteries [01:01] mikebot, it shows you the top of the cube :) [01:01] kitche: it makes everything fade except my browser [01:01] There isn't an actual power key for the calculator but my the key on my keyboard [01:02] <.< doesn't work === Don64 [n=dpowers6@ip68-102-235-221.ks.ok.cox.net] has joined #ubuntu [01:02] adamorjames, sorry, I just read your quesiton the wrong way === Don64 [n=dpowers6@ip68-102-235-221.ks.ok.cox.net] has left #ubuntu ["Leaving"] [01:02] hrm [01:02] !keytouch | adamorjames [01:02] adamorjames: Keyboard shortcuts can be set in System -> Preferences -> Keyboard Shortcuts (Gnome) or "Input Actions" in KControl (KDE). If your multimedia keys don't work with that, try keytouch - http://keytouch.sourceforge.net === GetronX [n=GetronX@189.149.153.215] has joined #ubuntu === sixhat [n=sixhat@89.181.220.84] has joined #ubuntu [01:02] ... === marko-_- [n=marko@BSN-61-2-113.dial-up.dsl.siol.net] has joined #ubuntu [01:03] For example, 1^2, 2^3, 5^6 etc [01:03] shift + 6 === Eustachy_Kapusta [i=tomek@dfi9.neoplus.adsl.tpnet.pl] has joined #ubuntu === evri2 [n=evri2@85.108.108.140] has joined #ubuntu [01:03] I guess I'll have to wait for Gutsy.. === salah__ [n=salah@217-12-140.0505.adsl.tele2.no] has joined #ubuntu [01:04] <.< === krammer [n=krammer@c-66-177-57-246.hsd1.fl.comcast.net] has joined #ubuntu [01:04] This is a stupid problem === Thegeektechnique [n=geek@ip70-178-247-42.ks.ks.cox.net] has joined #ubuntu [01:04] and a major one === Grungebunny [n=evil@24-171-65-231.dhcp.mtvr.il.charter.com] has joined #ubuntu [01:04] HI all of sudden I cannot connect to my router as well at my college any help === rodserling__ [n=rod@pool-71-124-221-205.bstnma.east.verizon.net] has joined #ubuntu [01:04] adamorjames, just because the symbol is ^doesn'T mean that it corresponds to the same key, I suggest you check in the calculator's help file === adamorjames [n=adamorja@ppp-70-244-173-194.dsl.rcsntx.swbell.net] has left #ubuntu [] === MrRiCE [n=tt@c-24-7-30-132.hsd1.ca.comcast.net] has joined #ubuntu === miky_ [n=miky@host-84-223-131-197.cust-adsl.tiscali.it] has joined #ubuntu [01:04] adamorjames, hardly a major problem ;) === GoodHabit [n=goodhabi@213.184.245.43.server.by] has joined #ubuntu === phos-phoros [n=James@unaffiliated/phos-phoros] has joined #ubuntu [01:05] I have a game at /opt/ directory. How to make shortcup in right way to use that game (simple path to bin file doesn't work - I think problem is with working directory). === mon^rch [n=anonymou@S0106000fea33f1bb.cg.shawcable.net] has joined #ubuntu === Centaur5__ [n=fishman@209.33.251.178] has joined #ubuntu === matthew_ [n=matthew@e-231.redwoods.cc.ca.us] has joined #ubuntu [01:05] I think he needs to press '3 CTRL+2' to get '3^2' === lionstone [n=blo@c-67-180-84-37.hsd1.ca.comcast.net] has joined #ubuntu [01:05] GoodHabit, change the permission of the file to make it exectuable [01:05] GoodHabit: make a little script to cd to the game directory, then run it === daprie [n=daprie@72.166.167.86] has joined #ubuntu === lionstone [n=blo@c-67-180-84-37.hsd1.ca.comcast.net] has left #ubuntu ["Ex-Chat"] [01:06] what is the command line to change ownership of a file from root to nerd the file is /dev/lp0 === rmonnerat [n=monnerat@189.25.204.178] has joined #ubuntu [01:06] gordonjcp: I dunno how-to write that scripts... [01:06] How to do it? === Linux-Daemon [n=matt-dae@91.106.10.103] has joined #ubuntu === setite [n=PolarisX@ip70-173-45-2.lv.lv.cox.net] has joined #ubuntu === Jasnation [n=Jasnatio@97-81-34-102.dhcp.oxfr.ma.charter.com] has joined #ubuntu === DtG [n=no@c-71-58-57-168.hsd1.pa.comcast.net] has joined #ubuntu === lugot_demo [n=user@216-173-177-162.electronet.net] has joined #ubuntu [01:07] nerdboy1024, /dev/lp0 is not a file it's aprinter port , lp0 = lpt1 I believe [01:07] is it possible to run the quickbasic GUI in ubuntu? === tex_ [n=tex@62.13.168.78] has joined #ubuntu [01:07] can anyone help with an install question [01:08] l === lekremyelsew [n=lekremye@c-67-165-221-153.hsd1.co.comcast.net] has joined #ubuntu [01:08] Jasnation, I don'T know what quick basic is but if it runs on linux yes you can [01:08] daprie, just ask [01:08] k, === yakov [n=yakov@89-179-45-70.broadband.corbina.ru] has joined #ubuntu [01:08] quickbasic gui is dos [01:08] Buonanotte a tutti ;) [01:08] list [01:08] you would a dos emu wouldn't u? [01:08] my windows system just crashed and as I'm fed up with it I'm just going to install ubuntu instead [01:08] pelo: it is a old programming language for windows, like before visual basic [01:09] Jasnation, Is quickbasic the same as qbasic ? [01:09] eyec0n, there is something called mono to run dos stuff , like there is wine to run windows apps , don'T know if that helps === Googleheimer [n=zeke@166.165.132.242] has joined #ubuntu [01:09] mmy second drive is failing to mount could someone look at my fstab, http://pastebin.com/m2e0ef221, thank u [01:09] jordan_u: yes [01:09] Jasnation, see what I just told eyec0n [01:09] how do I emulate dos? [01:09] whe I boot from the disk it looks as though everything is going fine and then my screen goes all pixellated and my system just sitss there idling === u^B [n=allberto@60.52.0.253] has joined #ubuntu [01:09] daprie, still no question in there [01:09] Jasnation, dosbox === winwinwin [n=chatzill@unaffiliated/davidhkmrpowers] has joined #ubuntu === Skrypt [n=skrypt@64.62.187.4] has joined #ubuntu [01:09] so, my question is... what could be going wrong [01:09] pelo, do you knopw how to change the owner of the printer port? [01:10] ill try dosbox and mono, thanks guys === vph [n=verfaul@189.136.25.81] has joined #ubuntu === neuratix_ is now known as neuratix [01:10] and can I install ubuntu form knoppix instead [01:10] nerdboy1024, just allow yourself to use the printer in system > admin > users === cec [n=cec@74-51-43-40.telnetcommunications.com] has joined #ubuntu === Der_Horst [n=Horst@e176125221.adsl.alicedsl.de] has joined #ubuntu [01:10] daprie, waht video card do you hve ? [01:10] hey anyone can tell me was wrong, i am trying to compile something that uses glib.h but it says it's not there and i did sudo apt-get install libglib2.0-dev and it said i had the latest, anyone got a clue? [01:10] jasnation, i'm sure theres a better linux equivilent to quickbasic somewhere === deltaphc [n=Delta@66-215-39-203.dhcp.hspr.ca.charter.com] has joined #ubuntu === evri2 [n=evri2@85.108.108.140] has joined #ubuntu [01:11] eyec0n: I need to learn it for school, and the program has to load on the school computers [01:11] pelo, triend that, still says permission denied [01:11] vph, use synpatic , search for glib and see what else is available [01:12] oh I got ya [01:12] nerdboy1024, man chown , shoudl be something like sudo chown /dev/lp0 nerd:nerd or smething === rossco [n=ross@C-59-101-77-86.syd.connect.net.au] has joined #ubuntu === Azures [n=Azures@adsl-074-166-062-106.sip.asm.bellsouth.net] has joined #Ubuntu [01:12] I have a evga nvidia e-GeForce 6800 GS [01:12] can someone help me :0 [01:12] chown nerd /dev/lp0, tried it, did not work [01:13] pelo: what is synpatic??? [01:13] daprie, there is your problem , nvidia doesn't have Foss dirvers, you'll need to use the alternate isntall cd for the installatio0n [01:13] vph, synaptic , sorry for the typo , if you are running gnome menu > system > admin > synaptic package manager === Busata [n=Busata@unaffiliated/busata] has joined #ubuntu [01:13] i can't connect to the internet :( [01:14] Azures, can we have details ? [01:14] vph a package search/installer [01:14] eyec0n: would an equivalent use all the same commands and syntax, and basically look the same as if I wrote the code in qb? because I could just transfer from one to the other with my code saved in text files === sc0tt_ [n=sc0tt@cpc1-stok5-0-0-cust150.bagu.cable.ntl.com] has joined #ubuntu === BlackAlex [n=alex@24-155-71-12.dyn.grandenetworks.net] has joined #ubuntu [01:15] sure my router is a 2wire dsl/gateway and im on bellsouth dsl with a reltek 8139 nw card === ShadowXP [n=ShadowXP@pool-71-104-126-9.lsanca.dsl-w.verizon.net] has joined #ubuntu === mrigns [n=mrigns@unaffiliated/mrigns] has joined #ubuntu [01:15] Azures, so this would be wireless ? [01:15] ok... got it. Thx === At0mic_P1 [n=arch_ato@host-216-77-193-25.jan.bellsouth.net] has joined #ubuntu [01:15] jasnation, i'd just use a dos emu and install quickbasic so you keep compatability [01:15] nope wired connection [01:15] its dchp [01:16] can someone please help me access /dev/lp0, i've tried users&groups, chmod, chown, nothing works [01:16] Azures, can you get the router config screens === binarydigit [n=bdigit@unaffiliated/binarydigit] has joined #ubuntu [01:16] im trying to enable beryl with a fglrx dirver (ATI) that has a dual head configuration but it isnt working. Someone said direct rendering has to be enabled but I am not finding how to do so. Can someone help me out? [01:16] nope [01:16] in xp i can [01:16] Azures, hve you tried ? === pteague [n=dbteague@64-151-34-57.dyn.everestkc.net] has joined #ubuntu === Jasnation [n=Jasnatio@97-81-34-102.dhcp.oxfr.ma.charter.com] has left #ubuntu ["bai"] [01:17] eg: how do i enable direct rendering? [01:17] i tried to get inbto my router on linux no go [01:17] Azures, try in menu > system > admin > network , select the correct device, in properties, you should have the option to use dhcp , assuming you aren'T already === ajr_ [n=ajr@217.216.24.164.dyn.user.ono.com] has joined #ubuntu [01:18] Azures, this ins't realy my area of expertise, that's pretty much the best I can do for you, you could try checking in the forum === ShadowXP [n=ShadowXP@pool-71-104-126-9.lsanca.dsl-w.verizon.net] has joined #ubuntu === speroni [n=chatzill@cpe-24-24-83-99.stny.res.rr.com] has joined #ubuntu === acuster [n=acuster@80.Red-81-41-242.staticIP.rima-tde.net] has joined #ubuntu [01:18] pelo is a wifi god tho === hyperbola [n=hyperbol@adsl-76-216-123-43.dsl.covlil.sbcglobal.net] has joined #ubuntu === trakala [n=erick@ip72-200-81-180.tc.ph.cox.net] has joined #ubuntu === Pelo beats Grungebunny mercilessly === MalconRox [n=robinson@200-140-107-37.cbace700.dsl.brasiltelecom.net.br] has joined #ubuntu [01:19] hey all === Pelo 's area of expertise is the easy stuff, thus freeing up the 1337 h4x0rs for the real tough stuff [01:20] hello guys [01:20] so would this be the place to be to get some ubuntu help? [01:20] speroni as good as any [01:21] speroni, yes but you must ask a question === Pelo hopes it's the right question, the consequences of asking the wrong one are unthinkable [01:21] Pelo: how to you do that (***Pelo ....) ? [01:21] O_O; what is up with pyNeighborhood?!!??! xsmbrowser works PERFECTLY, but pyNeighborhood refuses to work! [01:21] !opera [01:21] opera is an advanced and free (only as in price) web browser. Install it via Applications->Add/Remove..., making sure that "Show commercial applications" (dapper only) is checked. For more info on opera please see: https://help.ubuntu.com/community/OperaBrowser [01:21] it doesnt even make sense/ :X [01:21] kk the situation is as follows...i recently decided to try ubuntu, got it installed... [01:21] Eh, i can see you guys are mostly useless, thanks anyway [01:21] anyone knows how to make a laptop "frontpanel" audio jacks work? [01:22] i am having trouble with the wireless though === Sweetandy [n=andrew@c-24-17-18-66.hsd1.mn.comcast.net] has joined #ubuntu === frying_fish [n=frying_f@AC8DA098.ipt.aol.com] has joined #ubuntu [01:22] dapper only? [01:22] ./me [01:22] speroni, please don'T use the enter key for punctuation [01:22] !wifi | speroni start with this [01:22] speroni start with this: Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs [01:22] tovella, I block /msg please talk to me in th echannel [01:22] got the ndiswrapper working, and got the linksys drivers i need [01:23] tovella, no spaces before the / === Jasnation [n=Jasnatio@97-81-34-102.dhcp.oxfr.ma.charter.com] has joined #ubuntu [01:23] how do i enable direct rendering on with my ATI card? [01:23] speroni is the network secured? [01:23] Pelo: saw your pvt response ... thanks. === Paranoiak [n=Paranoia@202-171-77-75.h14.canl.nc] has joined #ubuntu === ttmrichter [n=ttmricht@59.172.143.123] has joined #ubuntu [01:23] BlackAlex, the ppl in #ubuntu-effects are good with graphic card stuff they can probably answer you [01:23] yes, basic wep, 64 bit hex [01:23] BlackAlex: you might want to check your man for your ATI drivers === Neoxygen [n=neoxygen@84-74-168-100.dclient.hispeed.ch] has joined #ubuntu [01:24] i can connect to the neighbors w/o any trouble [01:24] k, thanks Pelo [01:24] :-P [01:24] BlackAlex: you can probably edit something in xorg tha twill allow dr, i dont use a ATI card so i can't help you more than that sorry :( === Jasnation [n=Jasnatio@97-81-34-102.dhcp.oxfr.ma.charter.com] has joined #ubuntu === tyoc [n=ubuntu@189.181.158.145] has joined #ubuntu [01:24] not secured.. === dburnett77 [n=david@c-68-53-41-136.hsd1.tn.comcast.net] has joined #ubuntu === Soup_ [n=glenn@c-68-44-211-161.hsd1.pa.comcast.net] has joined #ubuntu [01:24] #windows makes me sad [01:24] speroni and you got the right key in ? [01:24] BlackAlex, Are you using fglrx? [01:24] how do I enable 5.1 surrond sound? === Abu_Hamza [n=ad@87.109.217.105] has left #ubuntu [] [01:24] yes Jordan_U === evri2 [n=evri2@85.108.108.140] has joined #ubuntu [01:24] BlackAlex, How did you install it? === tyoc [n=ubuntu@189.181.158.145] has left #ubuntu [] [01:25] how would I mount a pendrive in dosbox? [01:25] but i can't get it to connect to my own... i put in the key as it seems it should go, and a couple other ways... but it wont connect [01:25] speroni, I know some ppl have had problems with wpe in ubuntu , giving the forum a quick search might turn up a howto .. www.ubuntuforums.org [01:25] not really sure what the issue is [01:25] how would one mount a samba share? [01:25] uhm... i used the run file provided off ATI Radeon's webstie Joran_U [01:25] are there any good sync tools out there between *nix and samba shares? [01:25] speroni turn the wep off for a min just to see if you can connect then. [01:25] How do you enable Interactive Startup? I've tried pressing 'I', and removing 'quiet' from menu.lst [01:26] m0u5e, I think there is a howto in there http://ubuntuguide.org/wiki/Ubuntu:Feisty [01:26] m0u5e: you'll need either smbfs or fusemb (recommende) for that [01:26] im having problems with ubuntu on inspiron 1150, graphics dont seem to work and wireless card has issues, i havent even made it into ubuntu.. === ubuntu_ [n=ubuntu@201-42-194-119.dsl.telesp.net.br] has joined #ubuntu [01:26] speroni and on mine.. if this helps the 'enable roaming' is off === Falstius [n=jeff@c-24-11-53-75.hsd1.mi.comcast.net] has joined #ubuntu [01:26] Timbooooo, Can you give the specs of the GPU and wireless card? === pro_zack [n=zack@154.5.223.60] has left #ubuntu ["Ex-Chat"] === Frogzoo [n=Frogzoo@202.155.165.25] has joined #ubuntu === tyoc [n=ubuntu@189.181.158.145] has joined #ubuntu [01:27] Jordan_U where can i find that? === Jasnation [n=Jasnatio@97-81-34-102.dhcp.oxfr.ma.charter.com] has left #ubuntu ["bai"] [01:28] loading into xp gimme a minute [01:28] Timbooooo, I don't know in windows, in Linux it would be lspci, or for the GUI hardware information === TheRAt [n=TheRAt@pdpc/supporter/active/TheRAt] has joined #ubuntu [01:28] guys, ive just installed windows and i lost my grub. i tried to recover it using https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows === patrick__ [n=patrick@84.13.126.88] has joined #ubuntu [01:28] but... it says "Checking if "/boot/grub/stage1" exists... [01:28] tried it w/ the roaming off.. i was looking around the forums, (still am, but not seeing much past what came with the help file with the install) [01:29] hey people, mount from my LiveCD report "/dev/sda6 on /media/disk type reiserfs (rw,noexec,nosuid,nodev)" and from the menu.lst in boot grub it has a line "root (hd0,5)" is that OK, Im getting error 21 in grub stage 1.5 after change the motherboard from a gigabyte 965PDS to an ASUS p5B deluxe WiFi AP [01:29] ubuntu_, Did you accidentally format the whole drive and delete the Ubuntu partition? [01:29] nope [01:29] ubuntu_, in the links I will give you , find the link to the supergrub cd, dl it , burn it , and use it to restore stage one on your boot hdd [01:29] speroni but it does 'see' your network right? do you have wifi rader installed perhaps? [01:29] !grub | tyoc [01:29] tyoc: grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto [01:29] !grub > ubuntu_ check for a private message windows with instructions from ubotu [01:29] Anyone know how to do an Interactive Startup in Feisty? [01:29] haha... === technel [n=technel@66-216-232-76.dhcp.stcd.mn.charter.com] has joined #ubuntu [01:29] I havent lost grub for install windows... [01:30] thought that can serve.. [01:30] tyoc, Do you have a /boot? [01:30] I have change the motherboard [01:30] db interacative startup ? [01:30] yea [01:30] i see the network, it asks for the key when i go to connect, but then it just times out [01:30] dburnett77, you mean like a verbose mode === underdog5004 [n=matthew@e-231.redwoods.cc.ca.us] has joined #ubuntu [01:30] boot can be watched with gpoarted from LiveCD === ubuntu_ [n=ubuntu@201-42-194-119.dsl.telesp.net.br] has joined #ubuntu [01:30] Pelo, that's where you see what is being loaded. I've got something failing, and I don't know what it is. [01:30] if you ask... I have with the anterior motherboard a working system... [01:31] speroni and you can connect on a neighbor wifi.. that is weird. [01:31] even with the 8800 hehe [01:31] Yeah, Paddy, verbose. [01:31] dburnett77, the logs are in /var/log , you can have a look there [01:31] Jordan_U broadcom 440x 10/100 and intel 82852/82855 gm/gme [01:31] the problem seems to come from the wep on mine... [01:31] tyoc: your drive designations might have change from hda to sda (or vice versa) or hda to hdb (or combination of that). grub uses numbers, so e.g. hda1 would be (hd0,0) in grub speak [01:31] the problem apparently is that GRUB now have "lost" where the partition is... or something like that??? [01:31] speroni do you have xp on dual boot ? does it work on another os? could it be your router? [01:31] Timbooooo, I think that broadcom is your ethernet [01:31] wait sorry [01:31] yes sorry === BobCFC [n=server@client-82-26-73-134.bmly.adsl.virgin.net] has joined #ubuntu [01:31] Pelo, I believe he's looking for verbose.... wasnt dapper the last to do that by default [01:31] Timbooooo, And it should work === pietruch [n=piotrek@cua173.internetdsl.tpnet.pl] has joined #ubuntu [01:31] Yeah, I did that. I believe it's avahi-daemon, but I was wanting to see what was going on during the boot. [01:31] Jordan_U dell wireless 1350 wlan mini-pci [01:32] Hi guys I'm completely new to linux and IRC too so bear with me, I am using ubuntu (feisty fawn) and have a problem with my usb ports === miip [n=miip@p54A57AF4.dip.t-dialin.net] has joined #ubuntu [01:32] my usb devices (digital camera, usb drive) are not being detected, they worked before, but every time I ejected my flash drive to unplug it, that individual usb port would stop detecting devices until the pc was rebooted, this would happen only when ejecting anything connected to the port (i.e. flash drive, external media reader, etc). Is there anyway to kind of 'force' ubuntu (feisty fawn) to detect a usb device (digital camera)? It seemed l === mrgigabyte [n=Mr_Gigab@rrcs-66-91-141-222.west.biz.rr.com] has joined #ubuntu [01:32] i took my other computer, formerly running xp, wiped it and installed ubuntu it worked before [01:32] Jordan_U i get an error with microcode5 === mataca [n=mataca@98-111-235-201.fibertel.com.ar] has joined #ubuntu === sparklehistory [i=sparkleh@140.225.144.236] has joined #ubuntu [01:32] Paddy_EIRE, I think you are correct, then he would have to edit menu.lst fo remove the quiet option, or add noquiet, I don'T remember wchich [01:32] Jordan_U there also seems to be an issue with graphics starting? im not sure whta that means [01:33] stefg: then, if gparted and ~$ mount report "/dev/sda6 on /media/disk type reiserfs..." I should change to root (sda0,5) === spaz [n=moron@wikipedia/Jacob-Myers] has joined #ubuntu [01:33] hello [01:33] Timbooooo, I think you need firmware for your wifi card, does it start fine in safe graphics mode? [01:33] hi spaz [01:33] ;] === SmrtJustin [n=SmrtJust@cblmdm72-241-92-132.buckeyecom.net] has joined #ubuntu [01:33] speroni try a different wep pass to change all the keys.. [01:33] Pelo, exactly.. gonna find out curious myself [01:33] Jordan_U let me try safe graphics mode, i think it had problems then as well [01:33] i have problems with ldconfig (it's making package upgrades with apt fail :-( ) [01:33] here's the output from ldconfig -v === mataca [n=mataca@98-111-235-201.fibertel.com.ar] has left #ubuntu ["Volver] [01:33] http://pastebin.ca/681613 [01:33] that's as far as i got [01:33] kk [01:33] because i know jack squat about this sort of thing. [01:34] tyoc: grub doesn't know sda or hda... just uses numbers (hd0,5). read the howto [01:34] it's by sheer will/manpage browsing i manage to get all that spit out [01:34] Paddy, Pelo: There are several 'quiet' lines in my menu.lst file. Should I remove them all, because I've just removed the one in the default kernel section, with no luck. [01:34] dburnett77, when you get to the boot menu, select the ubuntu entry, type e for edit , find the kernel line in the entry and remove the words quiet and splash don'T worry about messing it up those edits aren'T permanent === dfear [n=dfear@82-46-27-208.cable.ubr02.hawk.blueyonder.co.uk] has joined #ubuntu [01:35] mmm, OK, anyway, if you can take a look http://ubuntuforums.org/showpost.php?p=3310874&postcount=4 are some output of find in GRUB [01:35] what does it mean "The following packages have unmet dependencies: [01:35] dburnett77, https://help.ubuntu.com/community/GrubHowto#head-7d876114f64c154224630a01c0bd9c4d335e931d [01:35] python-dev: Depends: python (= 2.5.1~rc1-0ubuntu3) but 2.5.1-0ubuntu3 is to be installed [01:35] Depends: python2.5-dev (>= 2.5.1~rc1) but it is not going to be installed [01:35] E: Broken packages" ?? === lumgwada [n=lumgwada@unaffiliated/lumgwada] has joined #ubuntu === j4ne [n=s3rge@ATuileries-151-1-14-218.w82-123.abo.wanadoo.fr] has joined #ubuntu [01:35] hi [01:35] OK. I'll go try that. Thanks Pelo & Paddy_EIRE. === dburnett77 [n=david@c-68-53-41-136.hsd1.tn.comcast.net] has left #ubuntu [] [01:35] is it possible to have python-dev then? [01:35] yakov, sudo apt-get install python2.5-dev python [01:35] may/may not work [01:35] :-/ [01:35] yakov, means you have to get into synaptic and install those packages adn the corresponding -dev [01:36] anyone can help me fort set jack hotplugin on asus laptop ? (i want to use my headphone without pc speaker) === ubuntu__ [n=ubuntu@201-27-138-54.dsl.telesp.net.br] has joined #ubuntu === atarinox [n=atarinox@68.63.173.14] has joined #ubuntu [01:36] spaz, doesnt work :/ [01:36] yakov, hmm === dfear [n=dfear@82-46-27-208.cable.ubr02.hawk.blueyonder.co.uk] has left #ubuntu ["Ex-Chat"] [01:36] dunno [01:36] *shrug* [01:36] do what Pelo said [01:36] j4ne, I'd look in the forum for help on that www.ubuntuforums.org === zezario [n=ubuntu@200.38.71.69] has joined #ubuntu [01:37] anyone know...would the specs for starcraft be different if run through wine? trying to figure out if it'll run on my old 600mhz p3 w/ 128mb [01:37] yakov: maybe apt-get -f install ....? [01:37] tyoc: so after running the 'find' you just say 'root (hd0,5)' and 'setup(hd0)' and pray that your bios doesn't swap drives around during boot as it became populra with newer biosses [01:37] I need help in spanish [01:37] try #ubuntu-es ? === Toran [n=youllnev@unaffiliated/toran] has joined #ubuntu [01:37] spaz, no piggybacking off ofther ppl's advice, come up with your own [01:37] !offtopic | zezario [01:37] anyone knows how to 'force' ubuntu to detect my digital camera? [01:37] zezario: #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome! [01:37] OK, thanks [01:37] ;-) [01:37] Jordan_U i get an error "failed to start the X server" === speroni_ [n=chatzill@cpe-24-24-83-99.stny.res.rr.com] has joined #ubuntu === ReyBit [n=reybit@ppp-49-137.33-151.iol.it] has joined #ubuntu === realnewguy [n=xen@ip-58-28-153-202.ubs-dsl.xnet.co.nz] has joined #ubuntu === ReyBit [n=reybit@ppp-49-137.33-151.iol.it] has left #ubuntu [] [01:37] Jordan_U i also get "error: microcode "bcm43xx_microcode5.fw not available or load failed" === Empus [n=empus@akl.hostsmart.co.nz] has joined #ubuntu === lekremyelsew [n=lekremye@c-67-165-221-153.hsd1.co.comcast.net] has joined #ubuntu [01:38] Timbooooo, have you successfully installed ? or are you trying to ? === Ninja [n=dhull@134-7-178-69.static.gci.net] has joined #ubuntu [01:38] Timbooooo, I can help with the second error, not sure about the first [01:38] Pelo trying to run live cd, just get into ubuntu [01:38] hey everybody, i need some help with jack === freenut [n=james@c-76-24-210-208.hsd1.ma.comcast.net] has joined #ubuntu [01:38] I am taking a foreign language course that requires me to listen to MP3s and practice saying words after hearing them. What would a good program be for playing MP3s that would allow me to easily play/pause, and (for lack of a better term) rewind and fast-forward slowly/quickly ? [01:38] Timbooooo: what type computer is it? Ill look up the chipset for the BCM real quick. [01:38] lekremyelsew, Do you have a real time capable kernel installed? [01:38] Pelo: i've set the option -> options snd-hda-intel model=asus | in > /etc/modprobe.d/alsabase. but not working. if put down the volume it's work for speaker AND headphone [01:38] Timbooooo, you might want to give the alternate install cd a try, it is text based, [01:38] hey guys ive just fixed my screen resolution to 1280x1024, however my hz rate is now at 76hz, is this ok? ive got a samsung syncmaster931B LCD monitor, will it running at 76hz wreck it? or will it be ok? [01:38] Mr_Pan inspiron 1150 [01:39] Toran: amarok [01:39] I am not looking for a large-collection jukebox. Something that is more for playing one file at a time with more accurate controls === At0mic_PC [n=arch_ato@host-209-214-151-6.jan.bellsouth.net] has joined #ubuntu [01:39] Pelo i want to try live cd first, can i do text install for live run? === fiveofoh [n=Owner@69-10-206-74.localaccess.com] has joined #ubuntu [01:39] Toran: try vlc [01:39] j4ne, I don'T know how to help you with that , which is why I recommended the forum === klick [n=klick@ip72-213-209-245.pn.at.cox.net] has joined #ubuntu [01:39] Jordan_U: i just have a generic kernal installed, will that work [01:39] thanks, I'll check it out [01:39] Toran: Yeah, vlc would be good [01:39] !info vlc | Toran [01:39] Pelo: ok thank [01:39] toran: vlc: multimedia player and streamer. In component universe, is optional. Version 0.8.6.release-0ubuntu4 (feisty), package size 1131 kB, installed size 3192 kB [01:39] lekremyelsew, No, you need the low latency kernel [01:39] hello, I have some problems with a SATA HD, I have ubuntu installed on a one Hd but some days ago I bougth a new SATA hd, the problem is that I can't mount it, it has 320 GB of capacity, but when I try to mount it ubuntu says that the capacity of my new hd is 128MG and I can't write enside of this.... what should I do ? === Toran [n=youllnev@unaffiliated/toran] has left #ubuntu [] === suok_0 [n=ircap8@231.Red-88-8-195.dynamicIP.rima-tde.net] has joined #ubuntu [01:39] Quick question - I got my Ubuntu joined to a Win2003 domain, but I have to re-join every boot (it drops the domain on reboot) - is there something simple I'm doing wrong/not doing? [01:40] Timbooooo, not realy, I suspect you have either a nvidia or ati video card which is causing the problem , you can'T run the live cd with those === sosriqwe [n=sosriqwe@85.101.100.245] has joined #ubuntu [01:40] Is there a way to use shock wave in linux [01:40] Jordan_U: alright [01:40] Pelo windows said it was intel [01:40] !shockwave [01:40] Shockwave is currently only available for Windows. To run it under !Wine, see https://help.ubuntu.com/community/Shockwave [01:40] Ninja, Only poorly in wine === MTecknology_ [n=MTecknol@138.247.245.68] has joined #ubuntu [01:40] mag_, install gparted, repartition it and then you can mount it [01:40] Jordan_U: I see : ( === MTecknology_ is now known as MTecknology [01:41] Timbooooo, I'm a linux user , I don'T trust windows ;-) === no_gatez_fan [n=patrick@cpe-069-132-015-252.carolina.res.rr.com] has joined #ubuntu [01:41] Windows paritioning sucks === dburnett77 [n=david@c-68-53-41-136.hsd1.tn.comcast.net] has joined #ubuntu [01:41] Timbooooo, but if you are having difficulties with the live cd the only other option is the altcd [01:41] Pelo i tried to update the drivers and dell said intel drivers for my computer [01:41] anyone knows how to 'force' ubuntu to detect my digital camera? [01:41] I always end up using the livecd to do partiitons === Mother-Russia [n=pinksovi@24-155-74-162.dyn.grandenetworks.net] has joined #ubuntu [01:41] pelo after text install i should be able to get into ubuntu with graphics...? [01:41] no dice [01:42] Timbooooo, ok try this, look up the computer model in this list , see if there are any issues https://wiki.ubuntu.com/HardwareSupport [01:42] Hey all, anyone know of any software that I could use to broadcast my buddies itunes stream onto my personal computer, we are networked together already, but i want to be able to hear whatever he is listening to === tyoc [n=ubuntu@189.181.158.145] has left #ubuntu [] [01:42] i use ubuntu, and he has windows [01:42] anyone knows how to 'force' ubuntu to detect my digital camera? === zezario [n=ubuntu@200.38.71.69] has left #ubuntu [] [01:42] Pelo, Paddy_EIRE: No luck with 'e' in GRUB. I deleted the 'quiet' line, and inserted 'nosplash'; but still got the progress graphic. [01:42] Timbooooo, yes, it will install a vesa driver temporataly to get you going , afterward you can try the restriced drivers and if those don'T work the binarie ones [01:42] klick: vlc (as mentioned before) [01:42] yakov: you get your broken packages fixed? [01:42] Pelo: I have some problems, I have installed gparted on my ubuntu, I have formated my hd again to ext3 but It says that I have 4 Gb ocupated ! [01:42] Pelo: is that normal ? === DaveG| [n=asdfasdf@82-47-197-238.cable.ubr02.shef.blueyonder.co.uk] has joined #ubuntu === patrick__ [n=patrick@84.13.126.88] has joined #ubuntu [01:43] trakala: it doesn't show in gthumb? [01:43] dburnett77, you should not have hadded nosplash, there should have been a "splash" to remove ,but ok === exs [n=engle@81-179-106-50.dsl.pipex.com] has joined #ubuntu [01:43] stefg, and how does he broadcast his music to my vlc? [01:43] :klick:vlc: [01:43] mag_: that depends on what you mean by "ocupated" - where does it say this? [01:43] tried changing the password, didn't work [01:43] Timbooooo: there are a lot of Broadcom cards that will work in this machine. But I believe the following link will help you when your in a gui and running... (I used it on my BCM4311) http://ubuntuforums.org/showthread.php?t=391961 [01:43] nickrud, nope [01:43] dburnett77, try asking in #grub maybe they know better [01:43] hey guys i just fixed my screen reso to 1280x1024, but my hz rate is stuck at 76hz, is this a bad rate for LCD's? [01:43] Frogzoo, nope [01:43] trying to figure out what does that mean.. [01:43] mag_, how big is your drive? [01:43] On one reboot, I did just delete the 'quiet' line. No luck. [01:43] mrgigabyte thanks [01:43] klick: using windows-vlc on is box and using its streamer features [01:43] realnewguy: lcd's don't have a refresh rate at all, so ignore it [01:44] seems like i have 2.5.1 and -dev is 2.5.1-rcX... === wt8008 [n=doubleyo@adsl-75-41-112-83.dsl.pltn13.sbcglobal.net] has joined #ubuntu === terrestre [n=ircap@254-7-246-201.adsl.terra.cl] has joined #ubuntu === Trevi [n=Trevi@host173-164-dynamic.104-80-r.retail.telecomitalia.it] has joined #ubuntu [01:44] OK. I'll check in the #grub chat area. Thanks. [01:44] Pelo https://wiki.ubuntu.com/LaptopTestingTeam/DellInspiron1150 [01:44] yakov: could you put the complete error on a pastebin? It usually means you've got missing/conflicting stuff in /etc/apt/sources.list , could you put that up as well [01:44] maybe i missed some repo. :/ === dburnett77 [n=david@c-68-53-41-136.hsd1.tn.comcast.net] has left #ubuntu [] [01:44] Frogzoo, every time after ejecting a flash drive the usb port stops detecting the camera [01:44] dburnett77: did you also follow the instructions on removing the 'splash' line [01:44] nickrud, sure [01:44] stefg, he would have to use vlc to play his music? he wants to use itunes, isnt there some way to just capture all the "WAVEOUT" and send it osmewhere? [01:44] realnewguy, check the screen specs on the manufacturer's site, or try menu > system > prefs > fonts, subpixel [01:44] Timbooooo, why are you showing me this ? [01:44] klick: ask apple === exp3ctr0 [n=exp3ctr0@201009154222.user.veloxzone.com.br] has joined #ubuntu [01:44] kitche: fiveofoh Pelo my drive is 320 gb but gparted says that is has 298.09 GB and I have in used 4.86 GB... why ? [01:45] Pelo i dont see any issues what else should i check? [01:45] anyone knows how to 'force' ubuntu to detect my digital camera? [01:45] mag_, some is in use for journaling if you are uisng ext3 === cappicard [n=cappicar@CPE-24-163-224-130.kc.res.rr.com] has joined #ubuntu [01:45] can you help me ? on my laptop (santa rosa-> X3100) could't not change the resolution (console mode) via vga=792 (X start ok. but not screen under console). and with video=intelfb:mode=1024x768-32 console and X work but the rsolution is set to 640x480 [01:45] dburnett77: there is a splash command already there you need to change it to delete it or change it to nosplash === Szeraax [n=uvsc@pc28.cse16.uvsc.edu] has joined #ubuntu [01:45] BobCFC: that guy doesnt hang about he's gone [01:45] trakala: try this first https://wiki.ubuntu.com/HardwareSupport [01:45] Timbooooo, the only other thing I know you can do is the alternate cd , sorry === gonzalo [n=gonzalo@190.48.114.154] has joined #ubuntu [01:46] Pelo ok thanks === tovella [n=ktraglin@ool-4579ba05.dyn.optonline.net] has joined #ubuntu [01:46] patrick__: sorry trying irssi it isn't showing leave/join grrrr [01:46] yakov: one more thing to put up: the output of dpkg -l 'python2.5*' [01:46] j4ne, edit xorg.conf and add the extra resolutions you need manauly === aryr100 [n=aryr100@cpe-24-195-253-196.nycap.res.rr.com] has joined #ubuntu [01:46] Timbooooo: sorry what was your other problem? I missed it. [01:46] nickrud, strange... ive double checked sources.. well, ive added gutsy there for kernel only and.. added /etc/apt/preferences [01:46] fiveofoh, thank you [01:46] kitche, fiveofoh, Pelo: I bouth this Device just because I want to save all my info there ! that't why, I don't kwno If other partirion or other kind of format could be better ! [01:46] yakov: oooooh pinning! [01:46] mrgigabyte i have an error with "X server" or something [01:47] BobCFC: Im Paddy_EIRE in irssi at the moment and its showing those details... did you edit anything manually [01:47] Pelo: the Xorg rsolution is ok. only the console rsolution is failed [01:47] after i've removed everything re gutsy it has worked (: === gonzalo [n=gonzalo@190.48.114.154] has left #ubuntu ["Saliendo"] [01:47] mrgigabyte i get an error "failed to start the X server" [01:47] mag_, ext3 is good , [01:47] nickrud, thx for the tip! === tatters [n=test@AC9F1F81.ipt.aol.com] has left #ubuntu ["Kopete] === Farhadix [i=root@80.191.164.22] has joined #ubuntu [01:47] mag_, well 5% or so is used for root [01:47] how I can get update list with apt-get only for epiphany? [01:47] patrick__: hi paddy it's serenityUK.. no it's a fresh install [01:47] yakov: a sec, there's a global setting if I can remember it [01:47] Does anyone know if Madwifi still doesnt support USB wireless adapters? I havent checked it out in a long time and everything that i have found is quite old... [01:47] j4ne, I don'T know how to set resolution in console , sorry, you can maybe check in th forum [01:47] hmm [01:47] i've a problem in which alt-tab no longer switches between tasks. works when logged in as another user, but not mine. any suggestions? [01:48] BobCFC: what does /ignore return? [01:48] Timbooooo: can you post your /etc/X11/xorg.conf file somewhere? Ill see if I can find the error.. or is it in booting process of the install CD? [01:48] Pelo: ok thk [01:48] tovella: have you checked your shortcuts? [01:48] later folks [01:48] kitche, fiveofoh, Pelo: but I have no OS on that device... === jdstrand_away [n=jamie@mail.strandboge.com] has joined #ubuntu [01:48] mrgigabyte it is while im trying to run ubuntu live cd [01:48] Szeraax: no, but i'll do that now. === GarethAdams is now known as GarethAdams|Bed [01:48] ok anyway I think it's good, but I can't mount ! [01:48] tovella: that's what it sounds like to me [01:48] mrgigabyte safe graphics gives me that error [01:48] is it true? "apt-get update epiphany" [01:49] jrib: hmm noting visible how do i change to status window? [01:49] BobCFC: alt-1 === dburnett77 [n=david@c-68-53-41-136.hsd1.tn.comcast.net] has joined #ubuntu [01:49] jrib: damn i thought so that changes workspaces on my window manager... grrr conflicting shortcut === pteague [n=dbteague@64-151-34-57.dyn.everestkc.net] has joined #ubuntu [01:50] BobCFC, use ctrl+p or n [01:50] previous next BobCFC [01:50] if i have 1g of ram, do i really need 3g of swap? [01:50] pteague, no [01:50] Paddy_EIRE: nice1 mate [01:50] :D === Sonicadvance1 [n=Sonicadv@69.92.214.236] has joined #Ubuntu [01:50] pteague, more like 256 megs [01:51] pteague: depends. you probly only need 1 to 1.5 GB though [01:51] BobCFC: /window goto 1 would work too [01:51] jrib: yes ignorance list is JOIN PARTS QUIT LIST === kritical [n=kritical@kritical.wxnz.net] has joined #ubuntu === felipe_ [n=felipe@189.24.151.149] has joined #ubuntu [01:51] BobCFC: there you go === jdstrand_away [n=jamie@mail.strandboge.com] has joined #ubuntu [01:51] hi everybody [01:51] Timbooooo: still searching for something. === lazaruslupine [n=scott@12-219-42-164.client.mchsi.com] has left #ubuntu [] === lazaruslupine [n=scott@12-219-42-164.client.mchsi.com] has joined #ubuntu [01:51] pteague: I keep my ram\swap at about 2 GB myself... [01:51] jrib: thanls i've googled a tutorial now better read up again [01:51] I would like to know if someone could help me with the .mov files extension === asdf [n=asdf@74-133-197-227.dhcp.insightbb.com] has joined #ubuntu [01:52] anyone can haelp me? how I can get update list with apt-get only for epiphany? [01:52] mrgigabyte ok thanks, ill try normal grpahics mode again [01:52] BobCFC: /unignore would get rid of it === haijun [n=haijun@82.158.166.88.dyn.user.ono.com] has joined #ubuntu [01:52] Szeraax: that was it (keyboard shortcuts). any ideas how it may have gotten changed? [01:52] rule of thumb is swap should be fairly close to actual RAM [01:52] neither of my media players are actually executing .mov files [01:52] more won't hurt but can be a waste of space === Asuka [n=Asuka@user-24-214-48-43.knology.net] has joined #ubuntu [01:52] all of them break when trying to open it === keen [n=keen@pool-70-20-69-33.pitbpa.east.verizon.net] has joined #ubuntu [01:53] I need help O.o === haijun [n=haijun@82.158.166.88.dyn.user.ono.com] has joined #ubuntu [01:53] yakov: you want to set APT::Default-Release "feisty"; in a file in /etc/apt/apt.conf.d ; that will prioritize fiesty when there's any doubt about which package to get while you have gutsy sources. [01:53] tovella: no idea, perhaps just reset to default then change what you want? [01:53] !helpme | Asuka [01:53] Asuka: Don't ask to ask a question. Just ask your question :) [01:53] jrib, I've still been trying religiously to download the documentation section of irssi's website with no joy :S wget tried to download a lot more than I bargained for with the -r switch and practically nothing with the normal usage no switch === rellik_ [n=rellik@adsl-70-238-176-86.dsl.stlsmo.sbcglobal.net] has joined #ubuntu [01:53] Any ideas on a domain join going south on a reboot? [01:53] anyone here connect to a windows network with their ubuntu box? [01:53] kitche, fiveofoh, Pelo: yesterday I couldn't mount this device, so I have installed administrator of HD but when it program try to mount this device it mount like 191.0 MG it says that my hd is of 191.0 MG..... That's bad man ! and If I try tu write someting enside of the Hd I can't [01:53] irc://irc.irc-hispano.org/ubuntu === killler [n=anon@139.57.44.114] has joined #ubuntu [01:53] plz [01:53] anyone help, plz [01:53] An error occurred in the io-library ('Bad parameters'): Could not find USB device (vendor 0x4a9, product 0x30fc). Make sure this device is connected to the computer. [01:53] I'm new to ubuntu, and I'm trying to set my resolution to 1440x900 [01:53] tovella: that's what i think i would do [01:53] Paddy_EIRE: /usr/share/doc/irssi has a lot of it [01:53] i need help with .mov files [01:53] nickrud, many thanks!.. will do right now... [01:54] but the default only goes up to 1280 [01:54] mag_: Administrator of HD? [01:54] doh... :) [01:54] !restricted > felipe_ (see the private message from ubotu) [01:54] jrib: cheers.. will it save the changes? [01:54] silly me [01:54] Szeraax: already fixed it with your previous response. just curious how it got changed. thanks. === masss [n=masss@c934d3a7.virtua.com.br] has joined #ubuntu [01:54] i searched around and found a script [01:54] they are not working and google isn't helpful [01:54] BobCFC: /save [01:54] Asuka: do you knwo about the Xorg.conf file? [01:54] Timbooooo: have you tried the "pci=nomsi" on the boot commandline? [01:54] know* [01:54] thats what I was about to ask [01:54] how do i access Xorg? === czedlitz [n=czedlitz@ip70-161-73-17.hr.hr.cox.net] has joined #ubuntu === wday [n=wday@ip70-172-209-41.ri.ri.cox.net] has joined #ubuntu === suupaabaka [n=suupaaba@202.134.248.89] has joined #ubuntu === BobCFC jrib is the man! [01:54] Asuka> i believe you'll need to add the 1440x900 resolution to the /etc/X11/xorg.conf file [01:54] or gconfig? === albert23 [n=albert@86.81.99.204] has left #ubuntu [] === wday [n=wday@ip70-172-209-41.ri.ri.cox.net] has left #ubuntu ["Ex-Chat"] [01:54] mrgigabyte no how do i add it [01:54] Asuka: i would type 'sudo nano /etc/X11/xorg.conf' [01:54] Asuka /etc/x11/xorg.conf === jdstrand_away is now known as jdstrand === BobCFC is now known as serenityUK [01:54] where do I type that? [01:54] console [01:54] Asuka; console [01:55] kitche, fiveofoh, Pelo: well I don't know the name in english, mmm it's someting that permite you to mount automatically someting [01:55] where do I get to console from? === sexcopter [n=james@sr-223.srsa01.resnet.ubc.ca] has joined #ubuntu [01:55] yakov: http://www.debian.org/doc/manuals/apt-howto/ch-apt-get.en.html#s-default-version for more details [01:55] kitche, fiveofoh, Pelo: Disk Manager 1.0.1 [01:55] Askua: the terminal.... /applications/accesories/terminal [01:55] alright, so when i'm in the terminal === mtoloko [n=flavi0@c953c21a.virtua.com.br] has joined #ubuntu [01:55] mag_, hal automounts if you don't have write permissions then your permissions is not setup right [01:55] yeah [01:55] plz [01:55] soooo nobody connects to a windows network at all? [01:55] someone help me with the .mov files [01:55] you type 'sudo nano /etc/X11/xorg.conf' [01:55] plz [01:55] i type 'sudo nano /etc/X11/xorg.conf' [01:55] keen, yes why [01:55] Asuka: sudo gedit /etc/X11/xorg.conf [01:55] if you have nano [01:55] yakov: truth in advertising: I believe feisty is the correct term, I've only done this in debian. You may need to ask around for the correct term [01:55] Okay or nano [01:55] felipe; vlc not play em? [01:55] :P [01:55] !es [01:55] Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda. [01:56] nope [01:56] excellent jrib exactly what I was looking for :) [01:56] Asuka: I like nano [01:56] kitche, fiveofoh, Pelo: but I don't know what to do ! === jdstrand_away [n=jamie@mail.strandboge.com] has joined #ubuntu [01:56] Szeraax: What's nano? === fosstux [n=fosstux@unaffiliated/crparr] has joined #ubuntu [01:56] mapp: well i can't seem to get a good connection to mine, i wanna cop some files to it but i can't [01:56] Timbooooo: http://ubuntu1501.blogspot.com/2007_01_01_archive.html towards the bottom... basically F6 then type pci=nomsi to the very end of this command line. === jdstrand_away is now known as jdstrand [01:56] they executed, but only the voice... not the video [01:56] felipe_: did you read the message from ubotu? [01:56] its a text editor [01:56] Asuka: way easy to use [01:56] dont know whats happening === ConstyXIV [n=andrew@74-128-189-16.dhcp.insightbb.com] has joined #ubuntu [01:56] how are you connect keen [01:56] alright, so if I type that in, my resolution should be set to 1440x900? or do I have to do something else? [01:56] and is it nfs/smb? === jdstrand is now known as jdstrand_away [01:57] mapp, wifi [01:57] yakov: one more thing: when you upgrade to gutsy, don't forget to update that setting [01:57] well it's gonna be slow, no? [01:57] mapp, well both wifi and hardwire work about the same [01:57] Asuka: haha no you have to go down to the bottom of the file and add that resolution to the list that's already there === rawss [i=tinman@we.are.jenniferlopezs.fans.please.supp0rt.us] has joined #ubuntu [01:57] Asuka: once you are into the file, you go down until you find a bunch of resolutions [01:57] oh [01:57] keen; is it nfs/samba tho [01:57] kitche, fiveofoh, Pelo: but is not good that, When I mount this device with disk manager it says that the capacity of sdb1 is of 191.0 MG and my HD is 320 GB !!!!! [01:57] Wait wait wait, Asuka, are you using an ATI card? [01:57] kitche, fiveofoh, Pelo: why ? === soccerguy53 [n=root@24-158-70-167.dhcp.spbg.sc.charter.com] has joined #ubuntu === lekremyelsew [n=lekremye@c-67-165-221-153.hsd1.co.comcast.net] has joined #ubuntu [01:57] mrgigabyte ok ill try that, when i install normally, i am able to see the tan colored background but i get an error message after that [01:57] Asuka: there is a resolution set for each color depth [01:57] mag_: I don't know, probably because Disk manager is crap [01:57] Wait...what? [01:57] (my computer is able to reach 1440x900, I'm using it on windows) [01:58] Asuka: Yeah but linux doesn't know that [01:58] mapp: you mean the file system? [01:58] Asuka: What's yoru video card? [01:58] (I have a geforce4 card) [01:58] keen;for the share yes [01:58] Do you have nVidia drivers installed? === Neoxygen [n=neoxygen@84-74-168-100.dclient.hispeed.ch] has joined #ubuntu [01:58] can anyone point me to some info on how to change compiz themes in 7.10? [01:58] Asuka: so i would to the one that is something like 24 bit depth and then add "1440x900" by the other resolutions [01:58] mapp: its ntfs === smitty01 [n=smith@dsl092-171-084.wdc2.dsl.speakeasy.net] has joined #ubuntu [01:58] !effects > eyec0n (see the private message from ubotu) [01:58] alright, and that should do it? [01:58] no i mean the share how are you transferring , accessing linux -> win etc [01:58] samba or nfs? [01:58] Hi! I'm currently seeking a web software which should do the following: Project Management (only a container for other things), Bug / issue tracker, forum, Documentation (userand dev). Ideally I'd like to have something similar like sourceforge or developer.berlios.de, but integrated into my own site. Any ideas? [01:58] after you restart X [01:58] kitche, fiveofoh, Pelo: but If I type this : mount -t ext3 /dev/sdb1 /media/backup the device is mounted, but I can't write enside of ! [01:58] mapp: linux to win === GarethAdams [n=gareth@cpc3-glfd2-0-0-cust11.glfd.cable.ntl.com] has joined #ubuntu [01:58] !effects [01:59] kitche, fiveofoh, Pelo: What should I do ? [01:59] For help or discussion on Beryl or Compiz desktop effects, please go to #ubuntu-effects [01:59] thanks [01:59] is x the terminal? [01:59] (oh and save) Asuka. if you used nano, type [ctrl] x to exit [01:59] X is the X windows system [01:59] felipe; democracyplayer or perhaps xine? [01:59] mapp: as for nfs, or samba. i'm not sure. i'm not familiar with those terms (never liked networking) [01:59] mag_, of course not you don't have the permissions to [01:59] so in other words, restart the compy? [01:59] xine doesnt works... [01:59] !permissions | mag_ [01:59] mag_: The files and directories on an Ubuntu system are organized according to a standard, see http://en.wikipedia.org/wiki/Filesystem_Hierarchy_Standard - file permissions are explained at https://help.ubuntu.com/community/FilePermissions - All filenames and directory names (and many other things) are case sensitive in Linux [01:59] oh [01:59] [ctrl] palt] backspace [01:59] Asuka: for me [01:59] fosstux: trac? don't think it has a forum though === scok [n=scok@116.63.rev.vline.pl] has joined #ubuntu [01:59] try democracyplayer yes [01:59] :> [01:59] [alt] * [01:59] they need some codecs that i am not being able to notive === tatters [n=test@AC9F1F81.ipt.aol.com] has joined #ubuntu === scok [n=scok@116.63.rev.vline.pl] has left #ubuntu ["Ex-Chat"] [01:59] keen; what speed is it getting on the cable [02:00] felipe; u jabe w32 codecs install yes? [02:00] felipe_: did you read the message from ubotu? === inx-live [i=peter@d58-110-211-153.mas9.nsw.optusnet.com.au] has joined #ubuntu [02:00] course === fiveofoh [n=Owner@69-10-206-74.localaccess.com] has left #ubuntu [] [02:00] sure [02:00] mapp: 100 mbps hardwire, 54 mbps wifi [02:00] yes [02:00] !who | felipe_ [02:00] felipe_: As you can see, this is a large channel. If you're speaking to someone in particular, please put their nickname in what you say (use !tab), or else messages get lost and it becomes confusing :) [02:00] jrib: yes === GarethAdams [n=gareth@pdpc/supporter/base/GarethAdams] has joined #ubuntu [02:00] amd what throughput is it getting as it works ur just saying its slow [02:00] im trying to find out === Farhadix [i=root@80.191.164.22] has left #ubuntu ["Leaving"] [02:00] Jordan_U: i got the lowlatency kernal but im still having a problem with the alsa driver [02:00] mapp: i can browse the share (very slow) but usually errors out when i try to transfer either way [02:00] jrib: thxs dude [02:00] felipe: mplayer a no go also? [02:00] are tutorials for installing apps/packages in ubuntu work for xubuntu? [02:00] Asuka: did it work? [02:01] jrib: no, and also no release management for downloads. I forgot to mention... [02:01] yeap [02:01] hmmh [02:01] mapp: yeap [02:01] i think that there is a codec problem [02:01] lol, im on windows right now, i havent installed ubuntu yet, so i've been booting off the cd to get a feel for it [02:01] i only just received the mail in cd today === adrigen [n=adrigen@218-215-22-7.people.net.au] has joined #ubuntu === gtk_sp [n=plinio@201.245.237.97] has joined #ubuntu [02:01] but, thanks guys, ill tell you how it worked out [02:01] Bye [02:02] but i went till mplayer homepage, and downloaded the latest codec packages... [02:02] gotta go back to work all.. Ill be on later [02:02] hmm [02:02] odd === Szeraax [n=uvsc@pc28.cse16.uvsc.edu] has left #ubuntu [] [02:02] i have never try to play .mov myself [02:02] felipe_: and where did you install them to? [02:02] then i put them on /usr/lib/codecs... === khermans [i=khermans@nat/cisco/x-df9d96c382210a3b] has joined #ubuntu [02:02] but it didn work also === [Wally] [n=waltermi@CPE001c1057f507-CM001868521c78.cpe.net.cable.rogers.com] has joined #ubuntu [02:02] hehehe [02:03] so we have an issue [02:03] !enter | felipe_ [02:03] felipe_: Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation! [02:03] jrib: sorry... === __mad [n=interpla@201009010146.user.veloxzone.com.br] has joined #ubuntu [02:03] felipe_: where is this .mov? === smitty01 [n=smith@dsl092-171-084.wdc2.dsl.speakeasy.net] has left #ubuntu ["Ex-Chat"] [02:04] atarinox: yes apt-get and synaptic work across all desktops === Paracha [i=Coder@Is.A.TclCoder.Org] has joined #ubuntu [02:04] Jordan_U: r u still there? === unhkk [n=joshua@203-184-57-197.jetbuster.co.nz] has joined #ubuntu [02:04] jrib: sorry... i havent undesrtood... fisically or on the web? [02:04] atarinox: but the add/remove programs menu is ubuntu only [02:05] felipe_: on the web, so I can try. Also, can you try this command and pastebin the output: mplayer http://images.linspire.com/file_types/ollie.mov [02:05] i want to password a file what can i use BestCrypt? === soccerguy53 [n=root@24-158-70-167.dhcp.spbg.sc.charter.com] has left #ubuntu [] === tag [n=scott@li11-229.members.linode.com] has joined #ubuntu [02:06] So [02:06] i think it costs === sixhat [n=sixhat@89.181.220.84] has left #ubuntu [] [02:06] I'm trying to get a thinkpad dock + monitor to dual screen === GarethAdams is now known as GarethAdams|Bed === Coole^ [n=justin@71-212-52-231.tukw.qwest.net] has joined #ubuntu [02:06] wh === DM| [n=dm@cpe-65-24-189-197.columbus.res.rr.com] has joined #ubuntu === quanmec [n=brent@adsl-074-244-033-186.sip.asm.bellsouth.net] has joined #ubuntu === noxs_ [n=noxs@e178069239.adsl.alicedsl.de] has joined #ubuntu === flokuehn [n=flokuehn@Xab07.x.pppool.de] has joined #ubuntu [02:06] jrib: hey dude!!! this one worked!!! i was trying to watch at http://media.rubyonrails.org/video/flickr-rails-ajax.mov [02:06] what is that multimedia stuff for ubuntu, again? [02:06] unhkk: gpg. It's basically pretty easy to achieve that, provided you are wililng to deal with python and some crypto apis [02:07] the special repo === mike [n=mike@S0106000ea64a652a.vf.shawcable.net] has joined #ubuntu [02:07] jrib: this one my mplayer isnt running [02:07] <[Wally] > Is there a live CD that has a default password? I'd like to boot from a cd, then ssh into the box to start an installation. That way I don't need to hook up a monitor. === MrStix [i=stix@dragon.fiber-is.net] has left #ubuntu [] [02:07] felipe; i just tried your url and it works [02:07] [Wally] : no default images have that for security reasons === DerangedDingo [n=john@24-113-250-73.wavecable.com] has joined #ubuntu [02:07] felipe; the url jrib pasted for u worked?! [02:08] the url you're trying is working for me atm using mplayer [02:08] does xchat support web cams? [02:08] mapp: worked... === thoreauputic [i=peter@ubuntu/member/thoreauputic] has joined #ubuntu === Metal03 [n=metal03@bas1-quebec14-1177671606.dsl.bell.ca] has joined #ubuntu [02:08] felipe; and the urlyou wanted to watch also work now? [02:08] !mplayer [02:08] mplayer is a media player. It resides in the mutiverse repository and can easily be installed via applications -> add/remove. For codecs try !codecs [02:08] Muelli: is there any aimple comand i can type in bash or something to password a single file? === noxs [n=noxs@e178069239.adsl.alicedsl.de] has joined #ubuntu [02:08] just done a clean install my second drive is normally automatically recognised and set but get an error if trying to access itI"""hal-storage-fixed-mount refused uid 1000" " I tried "sudo vol_id /dev/hdb" it outputs " " /dev/hdb: unknown volume type if I try toto mount the drive I get error again with the message "hal-storage-fixed-mount refused uid 1000" " [02:08] mapp: something happened!!! now its working [02:08] felipe: :)) good [02:08] or mabey password a zip or tarball [02:08] mapp: dont understand... === Random832 [n=random@c-69-136-185-145.hsd1.in.comcast.net] has joined #ubuntu [02:08] !networking [02:08] Sorry, I don't know anything about networking - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [02:09] how do i make gtk1.2 apps "match" gnome? === evri2 [n=evri2@85.108.108.140] has joined #ubuntu [02:09] !network [02:09] Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs === Leo^ [n=sdsf@d38-218-31.home1.cgocable.net] has joined #ubuntu [02:09] jrib: did that .mov file have some code on it??? cause now the other videos are running [02:09] Hello everyone... I just bought a new printer and I don't know how to install it... it's not in the choises in the System>Administration>Printing menu! It's a Samsung SCX-4200 [02:10] felipe: maybe you didnt run mplayer properly before:P === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has joined #ubuntu [02:10] unhkk: just gpg -c /your/file [02:10] finished === VikJES [n=esauve@modemcable183.15-202-24.mc.videotron.ca] has joined #ubuntu === KurtKraut [n=ktk@unaffiliated/kurtkraut] has joined #ubuntu [02:10] hey everybody, i am having problems with the sound output quality when i use an audio server [02:10] how do I tell linux what volume type a hard drive is [02:11] ah cool === joe_ [n=joe@c-71-197-131-180.hsd1.or.comcast.net] has joined #ubuntu === Kess [n=vince@rke29-1-88-168-168-2.fbx.proxad.net] has joined #ubuntu [02:11] unhkk: then you will have /your/file.gpg and it's (hopefully) encrypted === trakala [n=erick@ip72-200-81-180.tc.ph.cox.net] has left #ubuntu [] === Neoxygen [n=neoxygen@84-74-168-100.dclient.hispeed.ch] has joined #ubuntu === tck [n=tck@213-202-170-177.bas504.dsl.esat.net] has joined #ubuntu === bruenig [n=bruenig@ip-129-15-131-246.fescfwsm.ou.edu] has joined #ubuntu [02:11] mapp: hey... i noticed now the problem... if i try running it from double-clicking the file, it doesn't work... but, if i run from the console, it works... so, probably, is some parameter that are mistaken... [02:12] when i run the live cd i get a message "there was an error starting the GNOME settings daemon. theme,s sounds, or background settings may not work correctly" "Gnome will still try to resrt the setting daemon next time you log in" [02:12] thx dudes!!! you were great!!! now i see the mistake!!! :) [02:12] bye === hungypanda [n=hungypan@c-68-40-133-59.hsd1.mi.comcast.net] has joined #ubuntu [02:13] tatters: like what?! I mean, what's your original problem? === firehawk [n=binvij@123.201.51.23] has joined #ubuntu === irotas [n=irotas@c-66-30-195-112.hsd1.ma.comcast.net] has joined #ubuntu === Vorian [n=Steve@ubuntu/member/pdpc.supporter.active.Vorian] has joined #ubuntu [02:13] anyone? [02:13] just done a clean install my second drive is normally automatically recognised and set but get an error if trying to access itI"""hal-storage-fixed-mount refused uid 1000" " I tried "sudo vol_id /dev/hdb" it outputs " " /dev/hdb: unknown volume type if I try toto mount the drive I get error again with the message "hal-storage-fixed-mount refused uid 1000" === AngryElf [n=Angryelf@ip24-255-126-187.dc.dc.cox.net] has joined #ubuntu [02:14] Hi, this Samsung printer comes with Linux drivers but I have no idea how to install them... They're MFP drivers or something like that... anyone knows? === maek [n=maek@ip65-44-219-34.z219-44-65.customer.algx.net] has left #ubuntu [] === bigboss007 [n=joe@65.75.82.146] has joined #ubuntu [02:14] looking for shortcut to paste command that is inside a file to xterm cli input [02:15] help anyone [02:15] bigboss007: highlight the text, and press middle button in terminal [02:15] hm. funny tatters. Try 'file /dev/hdb' and fdisk /dev/hdb and look, what's up there. Maybe yuo blew your partition table === corpcomp [n=corpcomp@125-238-124-67.broadband-telecom.global-gateway.net.nz] has joined #ubuntu [02:15] nah [02:15] no X [02:15] bigboss007: strg+shift+v? [02:15] no gui [02:15] bigboss007: install gpm === realnewguy [n=xen@ip-58-28-153-202.ubs-dsl.xnet.co.nz] has left #ubuntu [] [02:15] why is my alas driver all staticy? [02:15] bigboss007: try shrift-insert? [02:15] bigboss007: gives the same ability === rsk [n=ruskie@c83-250-203-81.bredband.comhem.se] has joined #ubuntu === catfacts [n=catfacts@cpe-75-179-13-244.neo.res.rr.com] has joined #ubuntu [02:16] hello [02:16] listen... the command string is inside a text file [02:16] i have 2 computers connected via ethernet [02:16] i just wanted to export it onto the cli === tag [n=scott@p3m/member/tag] has joined #ubuntu [02:16] input line [02:16] and i want to share internet === evri2 [n=evri2@85.108.108.140] has joined #ubuntu === SineFato [n=sine@cpe-66-27-145-133.socal.res.rr.com] has joined #ubuntu [02:16] instead of typing the entire thing out [02:16] one has acces one has not === rpedro__ [n=rpedro@87-196-130-159.net.novis.pt] has joined #ubuntu [02:16] !enter | rsk [02:16] rsk: Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation! [02:16] is there a guide or howto? === kahrytan [n=kahrytan@pool-71-176-41-186.nrflva.east.verizon.net] has joined #ubuntu [02:16] I have a dual head setup - but they're set up like two different workstations === sudobash [n=wicked@adsl-234-215-208.cha.bellsouth.net] has joined #ubuntu [02:16] or workspaces === zenbuntu [n=Ron@cpe-69-200-95-98.nyc.res.rr.com] has joined #ubuntu [02:17] Muelli: file /dev/hdb/dev/hdb: block special (3/64) [02:17] what is the best general chat room on this server? [02:17] bigboss007: stick with gpm. Or use screen and it's copymode [02:17] bigboss007: install gpm. open file in vc1. higlight text. log in on vc2. press middle button [02:17] how can I get them to act like a single workspace? === ianinhoose [n=ianinhoo@host81-158-165-18.range81-158.btcentralplus.com] has joined #ubuntu [02:17] fdisk /dev/hdb Unable to open /dev/hdb [02:17] hmmmmm [02:17] ok ok [02:17] what is the best general chat room on this server? [02:17] Hello. I am trying to set up a folder that someone on the same network useing windows can access and drop off files. Do I need to set him up with a new user account? [02:17] sudobash: #opers [02:17] so i dont post this out of context === nickrud has gotta look at screen one of these days [02:18] join #opers [02:18] I have setup a user "useradd -p crypt1c -m username. I have gone to login via ssh and it fails. What have I done wrong. [02:18] SineFato: it's likely that you want to do that. But it's not a must of course. [02:18] was just looking for shortcut.. so far all i could think of was to echo file > .bash_history... then ctl+r to find it at cli input line [02:18] Is there a way to install drivers for that new Sansung SCX-4200 printer? === Tanman [n=weiyen@203-173-163-38.static.bliink.wave.co.nz] has joined #ubuntu [02:18] sudobash, #freenode I believe they changed their channels around a bit [02:18] nickrud: screen rocks :) really [02:18] !php [02:18] LAMP is an acronym for Linux-Apache-MySQL-PHP. However, the term is often used for setups using alternative but different software, such as Perl or Python instead of PHP, and Postgres instead of MySQL. For help with setting up LAMP on Ubuntu, see https://help.ubuntu.com/community/ApacheMySQLPHP - See also the Server CD installation process (different in Edgy+) === lullis [n=lullis@201.82.56.64] has joined #ubuntu [02:18] bigboss007: oh it's a one line file with a command you want to execute? [02:18] yessssss [02:18] lol [02:18] exactly [02:19] bigboss007: change it to executable with chmod u+x somefile .... [02:19] Muelli: Do I just make folder then make it shared? There are only the two of us on this net work [02:19] no [02:19] Muelli: maybe soon ;) === nickrud [n=nickrud_@216.112.213.2.ptr.us.xo.net] has left #ubuntu ["Leaving"] [02:19] dont want to run bash script [02:19] just paste to cli input [02:19] bigboss007: then execute with ./somefile [02:19] thats all === Samui [n=Samui@vultopia.kitsunet.net] has joined #ubuntu === mike3_ [n=Mike@dhcp-0-13-10-78-a2-54.cpe.mountaincable.net] has joined #ubuntu === Tanman [n=weiyen@203-173-163-38.static.bliink.wave.co.nz] has joined #ubuntu [02:19] hey guys, which command loads software-sources from the command line? [02:19] just thought a guru here had some trick === ShackJac1 [n=nate@c-65-96-48-74.hsd1.ma.comcast.net] has joined #ubuntu === lakin [n=lakin@S01060013101832ce.cg.shawcable.net] has joined #ubuntu [02:19] or shortcut [02:19] mike3_, loads is a bit confusing but I guess you mean apt-get update [02:19] ah SineFato. I'm sorry. Don't listen to me. No need to setup a seperate user. I though of filesharing over ssh which I do regularly. But you might want to use samba, so no need to set a seperate user up === smitty01 [n=smith@dsl092-171-084.wdc2.dsl.speakeasy.net] has joined #ubuntu [02:20] i was just wondering on my ubuntu server fiesty as to the reason why top would not run anymore [02:20] bruenig, I need to enable "Pre-relases" === jack_wyt_ [n=jack@124.64.104.125] has joined #ubuntu [02:20] if I delete my fstab will one be automatically created at bootup? [02:20] Hi all - having wireless networking issue... It can evidentally see my care and iwconfig shows it connected to correct network - but no signal - any ideas? [02:20] mike3_: if you mean the source code of a software, then you want to use apt-get source $yourpackage [02:20] it seems to just hang there [02:20] mike3_, what is that? === keen [n=keen@pool-70-20-69-33.pitbpa.east.verizon.net] has joined #ubuntu === At0mic_P1 [n=arch_ato@host-216-77-193-56.jan.bellsouth.net] has joined #ubuntu [02:21] Hi everyone. Could someone please point me to a decent and definite guide about sound servers and configuration in 64 bits Linux ? It's been two days now that I am trying to figure out what is needed to get (a) a sound server that doesn't hang out of nowhere and (b) a working microphone. [02:21] System->Administration->Software Sources. [02:21] mapp, you still here? === Amy38 [n=doug@71-218-78-35.hlrn.qwest.net] has joined #ubuntu [02:21] some stupid name that they give to something to make it "easier" I guess === fujin_ [n=aj@unaffiliated/fujin] has joined #ubuntu === ycmarvin [n=chatzill@121.97.212.157] has joined #ubuntu [02:21] #join #kubuntu === Jasnation [n=Jasnatio@97-81-34-102.dhcp.oxfr.ma.charter.com] has joined #ubuntu === Amy38 [n=doug@71-218-78-35.hlrn.qwest.net] has joined #ubuntu [02:21] lullis: hm. didn't get you. Do you want to stream music over the net? Or what else is a "sound server"? [02:21] can anyone help me with sharing files on a windows network? [02:22] Muelli: I just tried to apt-get it and it says that I already have it. Where would I find it because it's not in the applications menu === Frogzoo [n=Frogzoo@202.155.165.25] has joined #ubuntu [02:22] #join #kubuntu [02:22] :/ === Neoxygen [n=neoxygen@84-74-168-100.dclient.hispeed.ch] has joined #ubuntu [02:22] how do i uninstall ubuntu [02:22] A sound daemon, like ALSA. [02:22] install xp === kintaro0e [n=kintaro0@cebu.exist.com] has joined #ubuntu === _mad [n=interpla@201.9.10.146] has joined #ubuntu === magicalmoose [n=magicalm@208-216-112-64.dsl.tc3net.com] has joined #ubuntu === boyam [i=boyam@166-82-81-31.quickclick.ctc.net] has joined #ubuntu [02:22] but why ubuntu is awesome [02:22] go into your my documents folder and double click 'surrender' ..... :-D [02:22] wine "C:\Program Files\Program\Program.exe" [02:22] will run a program with wine right? [02:22] screw micro$oft [02:22] SineFato: I have no idea about setting up samba share as I don't use them. I don't know whether it's easy or not. Just ask the channel and wait paitiently :) [02:23] can somebody tell me which binary name is called when accessing "Software Sources" [02:23] ? [02:23] It is just for my desktop, actually. It is a Athlon X2 in a ASUS mobo with a nVidia chipset. [02:23] Jasnation: probably yes... [02:23] Jasnation: give it the linux path such as wine /media/winxp/some.exe === theine [n=theine@th316.st-edmunds.cam.ac.uk] has joined #ubuntu [02:23] or should I type wine "/home/user/.wine/drive_c/program files/program.exe" ? [02:23] mike3_: you can investigate on yourself by looking at "ps" or "top". But I think it might be synaptic or "update-manager" === ianinhoose [n=ianinhoo@host81-158-165-18.range81-158.btcentralplus.com] has joined #ubuntu [02:24] Jasnation: I think both is pretty correct [02:24] Jasnation: unless you installed it in the fake program files [02:24] I didn't install it, its actually in the "c" drive === piglit [n=piglit@cc104481-a.groni1.gr.home.nl] has joined #ubuntu [02:24] sudobash i just want to try fedora [02:24] Jasnation: why don't you just try it?! === Paranoiak [n=Paranoia@202-171-77-75.h14.canl.nc] has joined #ubuntu [02:24] Jasnation, still has to be a path. not windows path [02:25] can anyone help me with sharing files to a windows machine? [02:25] okay [02:25] Jasnation, It'll be like /dev/media/??? [02:25] keen: isn't it just about right clicknig a folder and selecting "share" or the like? [02:25] If I have a dual screen and it shows up as two workspaces - how can I fix that so they're like a single continuous workspace? [02:25] it seems unusual that there is nothing solid i can find when i google 'uninstall ubuntu' [02:25] meulli, hehe ya, i guess i worded it wrong === Tanman [n=weiyen@203-173-163-38.static.bliink.wave.co.nz] has joined #ubuntu === riddlebox [n=james@ppp-70-225-67-135.dsl.covlil.ameritech.net] has joined #ubuntu [02:26] Jasnation, kahrytan: You can execute files with wine "C:\program files\foo\bar.exe" works pretty well.. [02:26] muelli, i have an hd shared on my windows machine, i can see it in linux and browse it (very slowly) but would like to copy files to it and am having problems [02:26] ycmarvin, you don't really uninstall an operating system, you just install another one [02:26] Muelli, but thats not a linux path === AlCapwned [n=jay@adsl-75-7-47-79.dsl.pltn13.sbcglobal.net] has left #ubuntu [] [02:26] kahrytan: so what? [02:27] when i run the live cd i get a message "there was an error starting the GNOME settings daemon. theme,s sounds, or background settings may not work correctly" "Gnome will still try to resrt the setting daemon next time you log in" [02:27] kahrytan: wine is smart enough === Sorcaitis [n=Alex@71-80-112-171.dhcp.hckr.nc.charter.com] has joined #ubuntu [02:27] keen: what problems? [02:27] ok thanks bruenig === cedricshock [n=cedric@71-220-204-157.eugn.qwest.net] has joined #ubuntu === Soroosh [n=syazdani@bas2-hamilton14-1167921537.dsl.bell.ca] has joined #ubuntu [02:28] felipe: that's strange, but glad it's working now [02:28] muelli, well when i try to copy more than 1 file it errors out saying i can't copy and when i do copy 1 file at a time it will start to copy, but fail it the file is too large [02:28] I have wine /home/justin/.wine/drive_c/BC7/BIN/QBX.exe but nothing comes up === Metal03 [n=metal03@bas1-quebec14-1177671606.dsl.bell.ca] has left #ubuntu [] [02:28] muelli, Error "Invalid parameters" while copying "/media/sda2...h Hunt.avi". is the error i get [02:28] keen: hm. maybe stupidquestion, but is the target disk full? Or is your file, you try to copy, larger than 2GB? [02:29] which target OS is that keen? [02:29] Hi! My computer just crashed (stupid Skype), and now after reboot I can't find my ethernet card anymore. My network is a VIA VT86C100 [02:29] muelli, not full and the file is 217 meg [02:29] meulli, the target OS is windows vista business 32bit [02:29] when I run "modprobe via-rhine", I get "Invalid MAC address" error. === spark_s [n=spark@222.68.165.107] has joined #ubuntu [02:30] keen: I remeber some issues with samba and latest windows machines. But it might be solved now. (again: I don't really have a clue) === chris___ [n=chatzill@ool-44c40cb2.dyn.optonline.net] has joined #ubuntu === faktorqm [n=faktorqm@190.172.95.93] has joined #ubuntu === randy026 [n=randy026@70-58-155-80.eugn.qwest.net] has joined #ubuntu === Jasnation [n=Jasnatio@97-81-34-102.dhcp.oxfr.ma.charter.com] has left #ubuntu ["bai"] === shira [n=shira@wireless-128-62-173-79.public.utexas.edu] has joined #ubuntu === SineFato [n=sine@cpe-66-27-145-133.socal.res.rr.com] has left #ubuntu [] [02:30] muelli, well thanks for trying, its just a pain to grab my thumb drive to trasfer files... === m55 [n=mahyar@S0106004005306d1c.gv.shawcable.net] has joined #ubuntu [02:31] why does my /etc/inetd.conf not exist? [02:31] how can i use lpr to set the printing quality? === chris___ [n=chatzill@ool-44c40cb2.dyn.optonline.net] has left #ubuntu [] [02:31] keen: can you download large files from the net or is it just local problems? [02:31] (w/ cups) === willdev [n=willdev@86.157.221.99] has joined #ubuntu === speroni__ [n=chatzill@cpe-24-24-83-99.stny.res.rr.com] has joined #ubuntu [02:32] keen: there are several samba implementations out there. just google for samba + FUSE and see what it spits out. And to emphasize: M$ is to blame, not Ubuntu... With their fsck()ing protocol. You might want to use another file sharing protocl anyway... === speroni__ is now known as speroni === Insecta [i=insecta@on.verkossa.org] has joined #ubuntu [02:32] serenityuk, its just a local problem, on my home network, i can do this fine on my work network...those i am copying to macs there === blackenedESP [n=blackene@ool-44c40cb2.dyn.optonline.net] has joined #ubuntu === Crusher [n=You@ppp121-45-172-12.lns11.adl2.internode.on.net] has joined #ubuntu [02:32] muelli, thanks for your help =) [02:32] m55: usually, you give option with -o someoption. Dunno whether it helps you :-\ You might want to look up some cups or printer docs.. [02:32] Hi, I'm trying to secure my system by closing some ports, but my /etc/inetd.conf doesn't exist. it is suppose to be like this? === {DT} [n=redandbl@pool-72-82-52-103.rcmdva.east.verizon.net] has joined #ubuntu [02:33] muelli: I did, i couldn't find it [02:33] shira: there are no ports open on default ubuntu install [02:33] shira: well. If you haven't installed an inet.d than there is no reason for one to exist :) [02:33] serenityUK: ok well the problem is, apparently my system was compormised === HaMMeReD [n=adam@24.82.129.28] has joined #ubuntu [02:34] shira, generally, netkit-inetd isn't installed either [02:34] through port 22/tcp (ssh) and 631/tcp (ipp) [02:34] at least that's what the sys admin said. [02:34] m55: it might be a postscript option anyway. So maybe you have to give proper options while creating that file you are about to print (just a rough guesS) [02:35] I have setup a user "useradd -p crypt1c -m username. I have gone to login via ssh and it fails. What have I done wrong. === klick [n=klick@ip72-213-209-245.pn.at.cox.net] has joined #ubuntu [02:35] shira: pretty unlikely acutally. Thats ssh and cups. Both rather secure ;-) === {DT} [n=redandbl@pool-72-82-52-103.rcmdva.east.verizon.net] has joined #ubuntu [02:35] I'm trying to get my surround speakers to work. When I go to the SOUND DEVICES and choose MULTICHANNEL PLAYBACK then hit TEST, sound comes from all of them. But when I go to play a .mp3 file, I only get sound from the front 2. [02:35] corpcomp, did you create a password for the user? [02:35] Muelli: well, they closed my port (im in a university) =( [02:35] macd -p crypt1c === {DT} [n=redandbl@pool-72-82-52-103.rcmdva.east.verizon.net] has left #ubuntu ["Ex-Chat"] [02:35] shira: if you want to shut you ssh deamon down (do you?) then you should remove /etc/rc*.d/*ssh. Same for cups === Don64 [n=dpowers6@ip68-102-235-221.ks.ok.cox.net] has joined #ubuntu [02:36] Muelli: thanks, i'll do that === oni [n=oni@cpe-24-160-222-56.neo.res.rr.com] has joined #ubuntu === Neoxygen [n=neoxygen@84-74-168-100.dclient.hispeed.ch] has left #ubuntu ["Ex-Chat"] [02:36] well shira. I suppose your admins have no clue at all. How do they think your machine has been compromised? Throguh ssh?! === citronbleu-v [n=citronbl@lor34-1-82-240-236-19.fbx.proxad.net] has joined #ubuntu === pie-rate [n=ubuntu@cust-69-19-214-178.static.o1.com] has joined #ubuntu [02:36] corpcomp: why didn't you use 'adduser'? [02:36] how big should a / partition be for ubuntu if /home is on a separate partition? === nosilver4u [n=sbishop@209-188-66-157-host.drtel.net] has joined #ubuntu [02:36] corpcomp, and ssh dis running? and the user has a proper shell in /etc/shadow? as well as a home directory which they own? === nosilver4u [n=sbishop@209-188-66-157-host.drtel.net] has left #ubuntu ["Ex-Chat"] [02:36] shira: I suppose they have never heard about linux before... [02:36] anybody? === bird_ [i=bird@82.78.175.186] has joined #ubuntu [02:36] jrib, I think adduser is nice, but doesnt it limit you to 2 or 3 accounts [02:36] Muelli: shall I post their email msg? [02:36] Muelli, ssh gets broken into all the time but most of the time it's due to a dumb username/password [02:37] macd: no [02:37] hi [02:37] yeah that's what they told me, a weak password, though my password is pretty strong === {DT} [n=redandbl@pool-72-82-52-103.rcmdva.east.verizon.net] has joined #ubuntu === dchosenb [n=dchosenb@c-69-248-73-61.hsd1.pa.comcast.net] has joined #ubuntu [02:37] jrib: have a look at the post. I have setup a user "useradd -p crypt1c -m username. === xboxer42 [n=anuth@adsl-83-194-218.asm.bellsouth.net] has joined #ubuntu [02:37] well shira. If you don't mind :) But use pastebin.ca or the like [02:37] jrib, adduser: Only one or two names allowed. [02:37] funny it tells me that [02:37] they state: The following system appears to have been compromised [02:37] and is being remote-controlled via IRC for the purpose [02:37] of distributed scanning of other vulnerable hosts: [02:37] ; ATTACK VECTOR LIKELY WEAK SSH ACCOUNT PASSWORD === Metal03 [n=metal03@bas1-quebec14-1177671606.dsl.bell.ca] has joined #ubuntu === VikJES [n=esauve@modemcable183.15-202-24.mc.videotron.ca] has joined #ubuntu === evri2 [n=evri2@85.108.108.140] has joined #ubuntu [02:37] hi, I have installed ubuntu, and I can play multiple sounds at he same time, my sound card can not do hardware mixing, so it must to use some software mixing program, my question is : where is the asoundrc file because it's not in my home dir. or in the /etc folder === Hobbsee [n=Hobbsee@ubuntu/member/hobbsee] has joined #ubuntu [02:37] ie-rate: 5gb fine for normal 10gb for pwer user who compiles kernel etc need temp space === tehk [n=tehk@c-71-59-90-172.hsd1.nj.comcast.net] has joined #ubuntu [02:37] how can I stop the software mixing ? [02:38] !enter | shira [02:38] shira: Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation! === Creed [n=Ron@c-71-227-218-188.hsd1.or.comcast.net] has joined #ubuntu [02:38] I have a problem... I'm trying to follow a guide and typed "sudo chown -R root:root *" but now everything is owned by root... What do I do [02:38] macd: erm, what do you do for it to say that? [02:38] maybe my adduser is broken === kritical [n=kritical@kritical.wxnz.net] has joined #ubuntu [02:38] kitche: well, i'd not say "all the time", but yes, thats a point... [02:38] sudo adduser foo [02:38] anyone know how to find a eys number for xmodmap === keen [n=keen@pool-70-20-69-33.pitbpa.east.verizon.net] has joined #ubuntu [02:39] macd: do I have to setup any shell for a user to have ssh/ftp access? [02:39] Muelli, pretty much all the time or it just kills the sshd which I see happen regularly on my VPS when I ran one [02:39] corpcomp: yes, I saw that. Does your user have a home directory? [02:39] well shira. funny. why do they think, your machine has been compromised? Did they log any suspicious activity? [02:39] it works about 2 or 3 times on a fresh install then always gives that message [02:39] teck xev === mike3_ [n=Mike@dhcp-0-13-10-78-a2-54.cpe.mountaincable.net] has left #ubuntu ["Leaving"] === {DT} [n=redandbl@pool-72-82-52-103.rcmdva.east.verizon.net] has joined #ubuntu [02:39] yay - i managed to port LinPopUp to gtk 2 === faileas [n=Geek@cm209.delta20.maxonline.com.sg] has joined #ubuntu === {DT} [n=redandbl@pool-72-82-52-103.rcmdva.east.verizon.net] has left #ubuntu ["Ex-Chat"] === Nalidixic [n=mike@d207-81-239-161.bchsia.telus.net] has joined #ubuntu [02:39] Muelli: here is the rest of the email: http://pastebin.org/1774 [02:39] corpcomp, the user needs a shell to login with ssh [02:39] <_mad> theres a wine channel? === Aminux [n=chatzill@bl7-245-204.dsl.telepac.pt] has joined #ubuntu [02:39] jrib: yes, it was created when I created the account === Bino [n=schiffne@pool-70-109-205-243.prov.east.verizon.net] has joined #ubuntu [02:39] _mad: #winehq [02:39] tehk: xev [02:39] i downloaded the essentials codec pack, what do i do with it so mplayer can use it === MTecknology [n=MTecknol@138.247.245.68] has joined #ubuntu [02:39] <_mad> thx === J-_ [n=justin@unaffiliated/j/x-388422] has joined #ubuntu [02:39] /bin/bash or something, you can test that on another account by changing a user to /bin/false or something similar [02:39] kitche: how do you the username anyway? [02:39] serenityUK, k ty [02:40] hi === nosilver4u [n=sbishop@209-188-66-157-host.drtel.net] has joined #ubuntu === nosilver4u [n=sbishop@209-188-66-157-host.drtel.net] has left #ubuntu ["Ex-Chat"] [02:40] Muelli, usually they leave the username blank or use some common idiot usernames [02:40] got a problem, when i run the live cd i get a message "there was an error starting the GNOME settings daemon. theme,s sounds, or background settings may not work correctly" "Gnome will still try to resrt the setting daemon next time you log in" === Samui [n=Samui@vultopia.kitsunet.net] has joined #ubuntu [02:40] it is just sitting at the screen now [02:41] !repeat | Timbooooo === Aval0n- [i=aval0n@38.96.193.177] has joined #ubuntu [02:41] Timbooooo: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. You can search https://help.ubuntu.com or http://wiki.ubuntu.com while you wait. Also see !patience === zeer88 [n=tiago@81.193.78.241] has joined #ubuntu === Captain_Inferno8 [n=Bushsuck@adsl-074-166-214-206.sip.bct.bellsouth.net] has joined #ubuntu [02:41] !alternate | Timbooooo [02:41] Timbooooo: The Alternate CD (available as of Dapper) is the classical text-mode installation CD. Use it if you wish to upgrade via CD, or for an "expert" mode install. For normal installs, use the Desktop CD, which is also a "Live" CD - See also !Minimal [02:41] corpcomp: oh, that's the -m. Never mind then. ssh as some other user works ok? === nosilver4u [n=sbishop@209-188-66-157-host.drtel.net] has joined #ubuntu === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has joined #ubuntu [02:41] shira, by chance they might not allow irc connections === luis_lopez [n=luis@206-248-171-253.dsl.teksavvy.com] has joined #ubuntu [02:42] kitche: never used irc while I was here. I'm logging in using a different system === KennethP_ [n=kpo@80.167.165.222] has joined #ubuntu [02:42] bruenig can i not run live cd? === Ax3 [n=Tu3sday@rada.voodoohosting.com] has joined #ubuntu === ianinhoose [n=ianinhoo@host81-158-165-18.range81-158.btcentralplus.com] has joined #ubuntu === RxDx [i=Rodrigo@201-74-144-221-sj.cpe.vivax.com.br] has joined #ubuntu === spaz [n=moron@wikipedia/Jacob-Myers] has left #ubuntu ["NO] [02:42] hey, how do I mount a .bin/.cue file? === zeer88 [n=tiago@81.193.78.241] has left #ubuntu [] [02:42] Timbooooo, if you want to install use the alternate cd [02:42] kitche: that's bullshit. You actually can't leave the username empty. And I consider guessing the right one rather hard.. Which doesn't mean that it's not possible though... [02:42] Muelli, umm you never looked at a bruteforce log have you I have [02:43] !ohmy | Muelli [02:43] Muelli: Please watch your language and keep this channel family friendly. [02:43] anyone know how to get CS:S working with WINE ? [02:43] bruenig i want to use live cd to try it out.. will the alt cd work for that? [02:43] Timbooooo, no [02:43] corpcomp: I think I see the issue, read the entry for the -p switch in useradd's manpage [02:43] k :\ [02:43] shira: Funny.. Still, one doesn't know, why they think, that your machine has been compromised... I'd go there and ask :o) === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has left #ubuntu [] [02:43] Timbooooo: you could try running live cd in safe graphics mode? === evri2 [n=evri2@85.108.108.140] has joined #ubuntu === dudeicles [n=dudeicle@adsl-75-43-42-72.dsl.skt2ca.sbcglobal.net] has joined #ubuntu [02:44] how can i define resolution and refresh rate on ubuntu,im trying to use a resolution of 1280x1024 60hz but the refresh rate is only 47hz [02:44] -p expects later password input [02:44] serenityUK i tried, it gave me an error with x server or something [02:44] ohh nvm === kintaro0e [n=kintaro0@cebu.exist.com] has joined #ubuntu === Netham45 [n=netham@c-67-190-103-57.hsd1.co.comcast.net] has joined #ubuntu [02:44] heb it just disabled the account by doing that [02:44] Aminux: give xrandr a try [02:44] Timbooooo: ok alternate is text mode installer only === skaarg [n=skaarg@cbl-dhcp-69-226.machlink.com] has joined #ubuntu [02:45] serenityUK k ill give it a try === SineFato [n=sine@cpe-66-27-145-133.socal.res.rr.com] has joined #ubuntu === n2diy [n=darryl@wlk-barre-208-103-148-76.dynamic-dialup.coretel.net] has joined #ubuntu === Phrozen_One [n=Root@pool-72-65-101-244.ptldme.east.verizon.net] has joined #ubuntu [02:47] I'm trying to log into my linux box thru windows and it asks fro the username and password but when I put it in, it rejects it [02:47] Muelli: thanks. I suppose that's all I can do. === Soroosh [n=syazdani@bas2-hamilton14-1167921537.dsl.bell.ca] has left #ubuntu [] [02:48] Muelli: what exactly is xrandr ? === Asuka [n=Asuka@user-24-214-48-43.knology.net] has joined #ubuntu [02:48] i crashed and burned === rachel_ [n=rachel@ip68-225-230-68.oc.oc.cox.net] has joined #ubuntu [02:48] is there a reason ubuntu uses a logical partition for swap by default? === tatters [n=test@AC9F1F81.ipt.aol.com] has left #ubuntu ["Kopete] [02:48] dbx [02:48] macd: right, -p expects the password to be returned by crypt [02:48] hello guys [02:48] i need help real fast === ycmarvin [n=chatzill@121.97.215.212] has joined #ubuntu === TelnetManta [n=benwilli@71-12-14-250.dhcp.gnvl.sc.charter.com] has joined #ubuntu [02:49] Okay, I went into Terminal, typed sudo nano /ect/x11/xorg.conf [02:49] i cant change my refresh rate [02:49] on one login, my laptop detects the sound card, when i switch users it says it cant find the sound device? any ideas?? === FelixTheCat [n=none@adsl-4-158-40.gsp.bellsouth.net] has joined #ubuntu [02:49] !xrandr | Aminux [02:49] Sorry, I don't know anything about xrandr - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi === Jack_Sparrow [n=jack@adsl-69-227-94-40.dsl.sndg02.pacbell.net] has joined #Ubuntu [02:49] is there a way to recover cmos/bios password using ubuntu? [02:49] and all it did was open up this box thing with options on the bottom [02:49] i use 1280x768 47hz [02:49] but the refresh rate is wrong [02:49] ycmarvin: no [02:49] how can i change this [02:49] so, i'm trying to figure out how to make my resolution 1440 of 900 [02:50] !res [02:50] The X Window System is the part of your system that's responsible for graphical output. To restart your X, type sudo /etc/init.d/?dm restart in a console - To fix screen resolution or other X problems: http://help.ubuntu.com/community/FixVideoResolutionHowto === cheebz88 [n=cheebz88@cpe-76-186-152-168.tx.res.rr.com] has joined #ubuntu === felipe_ [n=felipe@189.24.151.149] has joined #ubuntu [02:50] on one login, my laptop detects the sound card, when i switch users it says it cant find the sound device? any ideas?? === ChaoticGood [n=ChaoticG@121.97.184.198] has joined #ubuntu [02:51] what does this mean? exec: 15: /sbin/ldconfig.real: not found [02:51] um === r00723r0 [n=r00723r0@unaffiliated/r00723r0] has joined #ubuntu [02:51] Aminux: in xorg.conf: define HorizSync & VertRefresh - google for examples [02:51] Hello dudes!!! I back again!!! [02:51] I imagine it has something to do with /sbin/ldconfig.real not being found [02:51] duhhh uhuhuhuhuhhuh [02:51] huhuh [02:51] rachel_: There is a situation where only one device can be using it at a time. Not sure if one user using it then switching users is the same situation [02:51] huh [02:51] :) [02:52] KevinOman: Behave [02:52] any idea why i would get "md0: raid array is not clean -- starting background reconstruction" on boot right after installation? [02:52] I am === jeffreyf [n=jeff@24.229.235.64.res-cmts.mtp.ptd.net] has joined #ubuntu [02:52] im laughing [02:52] look... i noticed that mplayer is running okay the .mov files... althought, Gmplayer isnt. Anyone has some idea that could help? === SineFato [n=sine@cpe-66-27-145-133.socal.res.rr.com] has left #ubuntu [] [02:52] hello [02:52] cause it so funny === left1 [n=sean@ip70-179-112-120.dc.dc.cox.net] has joined #ubuntu === shifty is now known as shifty- [02:52] i can log into my name from the boot up, and it still wont work tho? [02:52] felipe_: if in doubt try VLC player === saf [n=saf@CPE-124-183-130-50.nsw.bigpond.net.au] has joined #ubuntu === asherZ_Heron [n=asherZ@cpc2-hem11-0-0-cust523.lutn.cable.ntl.com] has joined #ubuntu === bkerr [n=bkerr@c-69-241-246-187.hsd1.mi.comcast.net] has joined #ubuntu [02:53] does anyone know why I might be getting this error? exec: 15: /sbin/ldconfig.real: not found [02:53] is there a way to dual-boot ubuntu and fedora [02:53] vlc player isnt working... it is not playing the images, only sound. [02:53] anyone know how to install World of Warcraft under WINE? === irotas [n=irotas@c-66-30-195-112.hsd1.ma.comcast.net] has joined #ubuntu [02:53] KevinOman, I don't suppose you have checked to see if /sbin/ldconfig.real is there have you? [02:53] ycmarvin: yes...you can... === alex_ [n=alex@125.127.92.76] has joined #ubuntu === shifty- [n=shifty@cpe-76-186-142-73.tx.res.rr.com] has left #ubuntu [] [02:54] I know its difficult to conceive of such brilliant troubleshooting tips, but you might === mindphasr [n=mind@rrcs-67-52-208-205.west.biz.rr.com] has joined #ubuntu [02:54] !appdb | jeffreyf look here for help installing wine apps: [02:54] jeffreyf look here for help installing wine apps:: Appdb is a database of apps & help for programs that run under wine: see http://appdb.winehq.org [02:54] is it possible without doing the partition === left1 [n=sean@ip70-179-112-120.dc.dc.cox.net] has left #ubuntu [] === shifty- [n=shifty@cpe-76-186-142-73.tx.res.rr.com] has joined #ubuntu === shifty- is now known as shifty [02:54] ycmarvin: Not that I am aware of... [02:54] yes, I did. it is not there, im trying to figure out why incase you didn't understans what I was asking [02:54] KevinOman: you running a shell script? [02:55] ycmarvin: You can look into virtual stuff [02:55] !find ldconfig.real === shifty is now known as dasuchin [02:55] felipe_: check your preferences? [02:55] Package/file ldconfig.real does not exist in feisty [02:55] virtual stuff? is there a help site on this i'd like to know more === Lucasg3 [n=lucasg3@200-102-190-139.jvece702.dsl.brasiltelecom.net.br] has joined #ubuntu [02:55] how do I forward a port from my 'Buntu box to my Windows box? [02:55] Hello :-) === brigante [n=brigante@host26-184-dynamic.9-87-r.retail.telecomitalia.it] has joined #ubuntu [02:56] Frogzoo, looks like it is there, I was in the wrong folder, yes, running an install script === luis_ [n=luis@190.67.227.215] has joined #ubuntu [02:56] well, ok i'll google it, thanks jack [02:56] ycmarvin: Let me see if I can find a link [02:56] jrib: it says the message: error opening/initializing the selected video_out (-vo) device [02:56] ycmarvin: Sorry I am drawing a blank on the name of that.. [02:56] felipe_: ah, which one is selected? === Dirrtys [n=dirrty@c-67-173-160-185.hsd1.il.comcast.net] has joined #ubuntu [02:56] thanks ubotu.......will work from there! [02:56] !vmware [02:56] VMWare Player is in Ubuntu's !Multiverse repository (package "vmware-player"), and http://www.easyvmx.com/easyvmx.shtml can create VMs for it. For VMWare Server, instructions can be found at https://help.ubuntu.com/community/VMware - See also !virtualizers [02:56] oh ok thanks anyway === Foobartender [n=foobarte@p54A0EC1F.dip.t-dialin.net] has joined #ubuntu === dori [n=dori@wikipedia/Dori] has joined #ubuntu [02:57] hi people, i know nothing about lan in anything, where can i get a good tuto to install a lan Ubuntu-Ubuntu [02:57] ? === SeveredCross [n=bojan@dhcp-129-64-131-19.dorm.brandeis.edu] has joined #ubuntu === SpudDogg [n=spuddogg@c-76-109-159-194.hsd1.fl.comcast.net] has joined #ubuntu [02:57] bruenig im running gutsy [02:57] KevinOman, wrong channel === anandanbu [n=phoenix@59.92.122.13] has joined #ubuntu [02:57] I've got a latency issue when using X remotely from Exceed on Windows and the Apple X server on OSX - anyone know how to work around it (menus etc all are slow to draw, compared with other distros like Redhat Enterprise, Fedora etc) [02:57] Now thats funny [02:58] luis, you might want to view videos on linksys.com about networking stuff === ker [n=ker@190.80.224.123] has joined #ubuntu === left1 [n=sean@ip70-179-112-120.dc.dc.cox.net] has joined #ubuntu [02:58] jrib: sorry... dont know how to tell you this... [02:58] how do I get the list of ubuntu channels? === iNkuBo [i=iNkuBo@host119-20-dynamic.11-87-r.retail.telecomitalia.it] has joined #ubuntu === oferw [n=oferw@DSL217-132-2-230.bb.netvision.net.il] has joined #ubuntu [02:58] #ubuntu-es [02:58] jrib: where can i find this piece of information? [02:58] felipe_: when you go to preferences/options, you can select the video out [02:58] felipe_: in gmplayer === kitche [n=dragon@pool-141-149-155-123.buff.east.verizon.net] has joined #ubuntu === Deucalion1 [n=deucalio@rrcs-24-39-255-45.nys.biz.rr.com] has joined #ubuntu === Stoffer [n=Stoffer@nj-71-53-29-19.dhcp.embarqhsd.net] has joined #ubuntu [02:59] left1: /list ubuntu or somesuch ? [03:00] Channel in portuguese? [03:00] !pt | Lucasg3 [03:00] Lucasg3: Por favor use #ubuntu-br ou #ubuntu-pt para ajuda em portugus. Obrigado. [03:00] how do I check how much disk space i have left on a particular partion? Say... my home parition? [03:00] ubotu: Brigado, no tava achando. [03:00] : What is THat?? === SkareCrow [n=skarecro@66-189-184-228.dhcp.wnch.wa.charter.com] has joined #ubuntu [03:01] Stoffer: df [03:01] I have a stupid question. Is it pronounced Line-X or Len-ox? [03:01] : that is a page of a company === Pelo [n=jean@mtl-pppoe-adsl889.securenet.net] has joined #ubuntu [03:01] /server -m test === Shadowpillar [n=ShadowXP@pool-71-104-126-9.lsanca.dsl-w.verizon.net] has joined #ubuntu [03:01] Jack_Sparrow: LEE-noox [03:01] Jack_Sparrow, Lynn-uhx is my preference [03:01] SkareCrow: do you have an ubuntu support question? [03:01] Jack_Sparrow: but that's Linus' pronunciation [03:02] Is there a version Ubuntu 7.08 === Pelo is up to the Davidson years, support will be shaky at best === Lucasg3 is now known as Luca1 === Nicark [n=Nicark@adsl-067-034-139-198.sip.mco.bellsouth.net] has joined #ubuntu === Luca1 is now known as Lucasg3 [03:02] anandanbu, 7.10 is the next [03:02] No I do not, I am trying to join a server in Gaim... I thought this was the #ubuntu social channel. [03:02] jrib: well... in preferences i can see a tab called video and there are a list of drivers... === Siph01 [n=siph0n@c-68-45-54-91.hsd1.nj.comcast.net] has joined #ubuntu [03:02] What is the Ubuntu social channel? [03:02] davidthedrake: Thanks... keep having people tell me it is Lie n x [03:02] felipe_: right, which one is selected? === maco_ [n=maco@161.253.8.116] has joined #ubuntu [03:02] SkareCrow: /join #ubuntu-offtopic [03:02] SkareCrow: #ubuntu-offtopic [03:02] jrib: xmga [03:02] Pelo: Just look into this http://linuxgazette.net/142/lg_bytes.html [03:02] Thanks [03:02] SkareCrow, linux users donT' have a social life [03:03] felipe_: try xv or x11 [03:03] anandanbu, what is it ? [03:03] I like to just idle and ask questions once in a while. === dudeicles [n=dudeicle@adsl-75-43-42-72.dsl.skt2ca.sbcglobal.net] has left #ubuntu ["Ex-Chat"] [03:03] what's the channel for gutsy? [03:03] Jack_Sparrow, I pronounce it Linn (like sin) uhx (like books) [03:03] KevinOman: #ubuntu+1 [03:03] KevinOman: #ubuntu+1 [03:03] thankyou jrib === maco_ is now known as macogw [03:03] mneptok: ty === michaelpo [n=presario@60.51.16.93] has joined #ubuntu === Lucasg3 [n=lucasg3@200-102-190-139.jvece702.dsl.brasiltelecom.net.br] has left #ubuntu [] [03:04] Random832, thanks [03:04] I am having a problem accessing a certain folder on my mounted NTFS partition? Anyone know what I should do? [03:04] Pelo: Look out for "LinuxWorld Awards Go to Ubuntu 7.08, EnterpriseDB, and Unicon" they have said Ubuntu 7.08 [03:04] jrib: both worked!!! thx dude!!! would you mind to explain the difference between them? === SkareCrow [n=skarecro@66-189-184-228.dhcp.wnch.wa.charter.com] has left #ubuntu [] [03:04] felipe_: xv is better [03:04] anandanbu, someone made a typo, the next version of ubuntu is Gutsy Gibbon 7.10 it is currently in alpha , herd 5 I think , you can ask about it in #ubuntu+1 === PhilKC [i=PhilKC@freenode/staff/philkc] has joined #Ubuntu === luis_ [n=luis@190.67.227.215] has left #ubuntu ["Ex-Chat"] [03:04] but why xv is better??? === Skiff|Lap [n=SkiffX@cpe-72-225-174-254.si.res.rr.com] has joined #ubuntu [03:05] Pelo: Thanks for the info === speroni__ [n=chatzill@cpe-24-24-83-99.stny.res.rr.com] has joined #ubuntu [03:05] anandanbu, and the next one will be Hardy Herron 8.04 [03:05] Pelo: it's tribes instead of herds this time [03:05] jrib, thanks I thought it didn't sound right [03:05] "the folder contents cannot be displayed"?? [03:06] Pelo: ok [03:06] jrib:but why xv is better??? === visualdeception [n=visualde@adsl-76-240-208-82.dsl.ipltin.sbcglobal.net] has joined #ubuntu === juan [n=juan@201-212-180-231.net.prima.net.ar] has joined #ubuntu === und3rtug4 [n=undertug@88.157.229.203] has joined #ubuntu === Pelo thinks the one after that is suppose to be Insufferable Imp 8,10 but isn'T realy sure === evri2 [n=evri2@85.108.108.140] has joined #ubuntu === PrivateUnix51279 [n=flowman4@41.219.222.1] has joined #ubuntu === Frogzoo_ [n=Frogzoo@202.155.165.25] has joined #ubuntu [03:07] felipe_: it uses your video card to render the video (you'll probably have to google for a more technical explanation). But practically, xv will let you go to fullscreen and your movie will scale while having good performance === KurtKraut [n=ktk@unaffiliated/kurtkraut] has joined #ubuntu === Frogzoo_ is now known as Frogzoo === nn-gentoo [n=nn-gento@74.94.43.195] has joined #ubuntu === evillord [i=darklord@2002:4b3b:a382:1337:0:0:0:1] has joined #ubuntu === jacob [n=jacob@ool-182c95bc.dyn.optonline.net] has joined #ubuntu === MindfulGeek [n=joep@dhcp-0-13-10-99-17-2f.cpe.townisp.com] has joined #ubuntu [03:08] hm [03:08] what does the tar command does, anybody? [03:08] hi [03:08] jacob: man tar === Pelo should have put more thought into is last joke, Incontinent Iguana would have been funnier [03:09] no man please, i need a quick answer [03:09] jrib: cool!!! so it is directly rendered by my video card???? cool!!! [03:09] It creates archives [03:09] jrib: thxs dude [03:09] jacob: compress.uncompress or copy if your tricky [03:09] Im amased the Dell is allowing you to by ubuntu systems !!!!!! It is Totally Amasing !!! === pearlbear [n=mpm@72.170.214.38] has joined #ubuntu [03:09] Amazing... [03:09] Jack_Sparrow: lin ux [03:09] ok,thx [03:09] and Extreamly usefull to the comunity === iblicf [n=iblicf@125.34.31.27] has joined #ubuntu === rain_ [n=rain@inet-netcache3-o.oracle.com] has joined #ubuntu [03:10] serenityUK: short or long i [03:10] nn-gentoo, why ? ubuntu is a very easy to use distro, well suited for new linux users and adaptable for more experienced ones [03:10] Jack_Sparrow: short like bin or sin === FreeDownload [n=user21@197-14-231-201.fibertel.com.ar] has joined #ubuntu [03:10] http://www.frikipedia.es/images/a/a7/CTRLALTSUP.jpg <<< AHORA EN USB! [03:11] ya i just think it's really cool finally linux has a edge on the windows compition !!! [03:11] !ops [03:11] Help! Mez, LjL, elkbuntu, imbrandon, DBO, gnomefreak, Hobbsee, rob, ompaul, Madpilot, Burgundavia, Seveas, CarlK, crimsun, ajmitch, tritium, Nalioth, thoreauputic, apokryphos, tonyyarusso, PriceChild, Amaranth, jrib, jenda, nixternal, Myrtti, mneptok or Pici [03:11] Jack_Sparrow: i used to say line like wine for years in 90s lol but it's like gin bin shin === mode/#ubuntu [+o jrib] by ChanServ === mode/#ubuntu [+b *!*@197-14-231-201.fibertel.com.ar] by jrib === FreeDownload [n=user21@197-14-231-201.fibertel.com.ar] has left #ubuntu [requested] === mode/#ubuntu [-o jrib] by jrib === atrocious [n=atrociou@83-52-100.netrun.cytanet.com.cy] has joined #ubuntu [03:11] serenityUK: thanks... either way I just glad people are using it.. === tigran [n=chatzill@netblock-66-245-212-67.dslextreme.com] has joined #ubuntu === kingKonqueror [n=hat@bas1-windsor12-1167875683.dsl.bell.ca] has joined #ubuntu === stefano [n=stefano@190.80.223.166] has joined #ubuntu [03:12] nn-gentoo, which ever distro big computer makers/sellers chose to pre-install gives hardware makers a good incentive to produce linux drivers , which is the major point [03:12] Is there a way to make the menus transparent? [03:13] stefano, probably with compiz-fusion === h1st0 [n=histo@h156.112.29.71.ip.alltel.net] has joined #ubuntu [03:13] stefano if you find out let me know [03:13] how do i get to the config for it? I remember there was a GUI to configure it. [03:13] Grungebunny, alright. [03:13] stefano, ask in #ubuntu-effects they probably know === lxuser [n=alan@68.113.106.94] has joined #ubuntu === ladydoor [n=ladydoor@unaffiliated/ladydoor] has joined #ubuntu === pyCube [n=jmayfiel@ip70-162-117-219.ph.ph.cox.net] has joined #ubuntu === Don64 [n=dpowers6@ip68-102-235-221.ks.ok.cox.net] has left #ubuntu ["Leaving"] === pyCube [n=jmayfiel@ip70-162-117-219.ph.ph.cox.net] has left #ubuntu ["Ex-Chat"] === nichos [n=nichos@c-66-177-166-95.hsd1.fl.comcast.net] has joined #ubuntu [03:14] stefano: sudo apt-get install gnome-compiz-manager [03:14] hi all, i seem to have lost all my window decorations. beryl is up and running fine, but no window decorations since rebooting - where to start? [03:14] stefano: you install compizconfig-settings-manager then its in the menu System->Prefs [03:14] mneptok, thanks. [03:14] I want to forward ports 22 and 80 from 192.168.0.104(Ubuntu PC) to 192.168.0.105(Internal HTTP server), how would I do that? [03:14] nichos: do you have emerald installed? [03:14] nichos: get a replacment manager that plays well with Beryl. Metacity does not [03:14] serenityUK, ill try your way... see what happens. [03:14] nichos, the ppl in #beryl can probably answer if no one here can [03:15] nichos: also support for 3d desktops is in #ubuntu-effects [03:15] nichos: just a tip try hitting alt +f2 and typing in emerald --replace [03:15] nichos, start a console type 'emerald --replace' === und3rtug4 [n=undertug@88.157.229.203] has joined #ubuntu [03:15] heh [03:15] that did it! [03:15] thanks all! === Sam_Wesin [n=null@pool-71-107-19-185.lsanca.dsl-w.verizon.net] has joined #ubuntu === nichos [n=nichos@c-66-177-166-95.hsd1.fl.comcast.net] has left #ubuntu [] === zyth [n=zyth@wnpgmb06dc1-0-52.dynamic.mts.net] has joined #Ubuntu [03:15] nichos: you need it to happen when you start each time.. === bkerr [n=bkerr@c-69-241-246-187.hsd1.mi.comcast.net] has left #ubuntu [] === RoC_MasterMind [n=Free@c-66-177-39-225.hsd1.fl.comcast.net] has joined #ubuntu [03:16] nichos goto System->Prefs->Sessions and add it as startup program after beryl-manager === wracko [n=wracko@201.86.254.165.adsl.gvt.net.br] has joined #ubuntu === neozen [n=neozen@c-71-228-16-126.hsd1.il.comcast.net] has joined #ubuntu [03:16] serenityUK, they are already gone === forgetso [n=forgetso@82-41-27-36.cable.ubr04.edin.blueyonder.co.uk] has joined #ubuntu [03:16] #winehq [03:16] macd: damn irssi lol [03:17] hello [03:17] macd: secind time grrrr [03:17] forgetso, /join #winehq === tophergilbert [n=cgilbert@adsl-67-66-102-219.dsl.wchtks.swbell.net] has joined #ubuntu [03:18] can i ask a question about wine here? [03:18] forgetso, sure , we can answer some [03:18] but not necessaraly all [03:18] hehe. room seems slow... ask === jimmacdonald [n=jim@138-212-223-66.gci.net] has joined #ubuntu === DenysLins [n=denys@189.13.234.224] has joined #ubuntu [03:18] hi everyone. i'm with a mouse problem. [03:19] wracko, details please [03:19] my microsoft usb mouse is incredibly slow [03:19] in ubuntu, fedora7 and foresight === Lord_Spidey [n=Lord~Spi@hlfxns0161w-142177022124.pppoe-dynamic.ns.aliant.net] has joined #ubuntu === bullgard4 [n=detlef@p54BF35A0.dip0.t-ipconnect.de] has joined #ubuntu [03:19] foresight? O.o [03:19] nice [03:19] how's that working out for you? [03:19] but in kurumin6 (brazilian knoppix based) and in the windows, the mouse works perfecr [03:19] *perfect [03:19] wracko, menu > system > prefs > mouse , you can set speed there, if not look up the model of the mouse in the forum www.ubuntuforums.org === chairat [n=chairatk@ppp-124.121.108.180.revip2.asianet.co.th] has joined #ubuntu [03:20] everything, except the mouse, is o.k. [03:20] What is button 3 in compiz terms? === speroni___ [n=chatzill@cpe-24-24-83-99.stny.res.rr.com] has joined #ubuntu [03:20] Pelo: i tried thied menu > system > prefs > mouse , but nothing [03:20] wracko, the forum then === Aminux [n=luis@bl7-244-210.dsl.telepac.pt] has joined #ubuntu [03:20] i tried the forum [03:20] changing the protocol to evdev === JDStone [n=JDStone@netblock-208-127-93-199.dslextreme.com] has joined #ubuntu [03:20] I am having a problem accessing a certain folder on my mounted NTFS partition? unable to display folder contents? Anyone know what that means? === Born_In_Xixax [n=dstaudt@adsl-69-153-251-12.dsl.okcyok.swbell.net] has joined #ubuntu [03:21] Have you tried other USB ports? [03:21] ok... i have just switched to ubuntu and i installed the 64-bit feisty fawn version on my amd athlon 64 , kv-8 pro MB computer. i tried installing wine with get-apt and then with source. both times i ran it, the program froze and i had to restart the comp. so i thot, y not just use 32-bit ubuntu. so i installed 32-bit ubuntu and installed wine the easier way (through add/remove programs). again it stalled the computer [03:21] and i had to restart. something is very much wrong. sorry for length of this... === speroni___ is now known as speroni [03:21] no, i didn't tried other usb port. good point. [03:21] next time i will restart with the live cd i will try this [03:21] and this next time will be this night === CacoMarx [n=Anderson@200.217.81.158] has joined #ubuntu [03:22] and in the fedora forums [03:22] forgetso, go to the winehq.org site follow the links to dl the latest ubuntu version, about half way down the insctructions page there are special instructions for hte 64 bit versiion === zyth is now known as Toxicity1000 [03:22] i have done that already pelo [03:22] it stalled on startup === Toxicity1000 is now known as zyth [03:22] and i now have 32-bit ubuntu anyway [03:22] they say some gnu/linux don't like 5v usb mouse === Rabbitbunny [n=server@h69.77.119.64.ip.alltel.net] has joined #ubuntu [03:23] forgetso, before you start a prog with wine , did you do winecfg to set the various options ? === DeaTH-mATCH [n=DeaTH-mA@196.203.26.92] has joined #ubuntu [03:23] winecfg also stalls the computer === zyth is now known as epod [03:23] i have microsoft 5button but it's wireless === cec [n=cec@74-51-43-40.telnetcommunications.com] has joined #ubuntu [03:23] hello ! i need help! i can't install my Ati X2000 :S [03:23] I've just gotten a new (to me) Dell D1526TX-HS monitor, I reconfigured xserver to use it yet the display still loops off the screen. Hints? [03:23] actually ill try that just now [03:24] coz i dont think i tried it with 32 bit altho i def did it with 64 [03:24] forgetso, I don'T know then , I think you'll hve to ask in #winehq, you might have to use some patience === allbert [n=allberto@124.82.16.86] has joined #ubuntu [03:24] not bad the new song of santana and nickelback ;) [03:24] :P === LGM^ [n=william@24.244.160.16] has joined #ubuntu === mode/#ubuntu [+o jrib] by ChanServ [03:25] ok, i will try changing the usb port === mode/#ubuntu [-b *!*@197-14-231-201.fibertel.com.ar] by jrib [03:25] thanks === mode/#ubuntu [-o jrib] by jrib === Pelo fears he wrath of jrib [03:25] the === wracko [n=wracko@201.86.254.165.adsl.gvt.net.br] has left #ubuntu [] === john [n=john@64.252.88.25] has joined #ubuntu === At0mic_PC [n=arch_ato@host-209-214-151-87.jan.bellsouth.net] has joined #ubuntu === simonpeter [n=simonpet@pool-71-241-170-121.buff.east.verizon.net] has joined #UBUNTU === forgetso [n=chris@82-41-27-36.cable.ubr04.edin.blueyonder.co.uk] has joined #ubuntu [03:26] does ubuntu support finger print readers T_T [03:27] #winehq === nickpresta_ [n=nickpres@CPE000625f47ed2-CM0011e6c456e3.cpe.net.cable.rogers.com] has joined #ubuntu === |gnurph| [n=gnurph@c-69-140-139-178.hsd1.md.comcast.net] has joined #ubuntu [03:27] m0u5e, linux in general does I think , you'll probably have to lookup a specific model in the forum or online === sanjay_ [n=sanjay@74.120.187.144] has joined #ubuntu [03:27] Pelo: alright, thx [03:27] forgetso, /join #channelname [03:27] hello, i just tried to run winecfg. it froze again and i had to restart [03:27] oh === sanjay_ is now known as lansen [03:27] :P [03:27] m0u5e: look up PAM authentication === isabella__ [n=isabella@pool-72-75-17-134.washdc.east.verizon.net] has joined #ubuntu [03:28] m0u5e, you might try here https://wiki.ubuntu.com/HardwareSupport [03:28] forgetso, ... === epod is now known as zyth === tigran [n=chatzill@netblock-66-245-212-67.dslextreme.com] has joined #ubuntu === ganadist [n=ganadist@ganadist.mizi.com] has joined #ubuntu === eyec0n [n=eyec0n@c-67-181-22-41.hsd1.ca.comcast.net] has joined #ubuntu === cheebz88 [n=cheebz88@cpe-76-186-152-168.tx.res.rr.com] has joined #ubuntu [03:28] <|gnurph|> can somebody point me in the right direction here? my wireless card works on my lappie...but I have to fiddle with it every time before it authenticates to my access point. [03:29] Pelo: thx :D [03:29] Pelo: just got my new laptop... have to say though, vista aero lags [03:29] serenityUK, How do i make the settings i modified be applied??? I change something and it doesn't work. [03:29] Pelo: compiz-fusion is faster lol [03:29] yes? === dasuchin is now known as shifty- === Skiff [n=SkiffX@cpe-72-225-174-254.si.res.rr.com] has joined #ubuntu [03:29] m0u5e, also requres less resources [03:30] "fewer" ;) === Crusher [n=You@ppp121-45-172-171.lns11.adl2.internode.on.net] has joined #ubuntu [03:30] forgetso, if you want to join another channel you need to type /join #channelname or /j #channelname [03:30] anyone use a LG 710s monitor? === ojon [n=joao@201-42-214-234.dsl.telesp.net.br] has joined #ubuntu [03:30] mneptok, sorry the "sarah-jane smith" episodes were a few weeks ago [03:30] stefano: are you sure you installed full compiz fusion or just old compiz? === martin_ [i=blutolan@nat/intel/x-5ee9ce46a0506db9] has joined #ubuntu === yurimxpxman [n=yurimxpx@pool-71-98-77-181.ipslin.dsl-w.verizon.net] has joined #ubuntu [03:31] how can I setup my own bittorrent tracker? === Bucketface [n=charles@89.204.192.59] has joined #ubuntu [03:31] i cant get a decent resolution on my monitor [03:31] serenityUK, i have Gutsy, it came with it. All the other repositories related to compiz are installed. [03:31] damn [03:31] oh yeh, sorry i got that [03:31] Aminux, what video card ? [03:31] ati 9600 === ladydoor [n=ladydoor@unaffiliated/ladydoor] has left #ubuntu ["bye"] === Bucketface [n=charles@89.204.192.59] has left #ubuntu ["Fais] === ojon [n=joao@201-42-214-234.dsl.telesp.net.br] has joined #ubuntu === J4fun [n=muru@adsl-68-126-189-222.dsl.pltn13.pacbell.net] has joined #ubuntu === speroni___ [n=chatzill@cpe-24-24-83-99.stny.res.rr.com] has joined #ubuntu === _2_ [n=_root@dialup-4.89.254.210.Dial1.Dallas1.Level3.net] has joined #ubuntu [03:32] stefano: ok have you set up the 3D drivers? === Binlafy [n=hasan@77.64.46.55] has joined #ubuntu === mphill [n=mphill@CPE-70-92-242-47.wi.res.rr.com] has joined #ubuntu === Jeaton [n=hybrid@unaffiliated/jeaton] has left #ubuntu [] === mode/#ubuntu [+o Hobbsee] by ChanServ [03:32] Pelo: word === mode/#ubuntu [-o Hobbsee] by ChanServ [03:32] Aminux, I think there is a special way of adding resolutions with ati card but I am not an expert, you can start by adding extra rex manualy to the xorg.conf file , see if that does it === J4fun [n=muru@adsl-68-126-189-222.dsl.pltn13.pacbell.net] has left #ubuntu ["Ex-Chat"] === Zylogue [n=Zylogue@ip24-253-211-224.ok.ok.cox.net] has joined #ubuntu [03:32] m0u5e, ? [03:32] extra what [03:32] Aminux, extra resolutions === anandanbu [n=phoenix@59.92.122.13] has left #ubuntu [] [03:33] i did [03:33] <_2_> why doesn't "ListenAddress 192.168.0.0/16" work in the "sshd.conf" ? i have to list every address specifically... ? [03:33] serenityUK, yes.. The problem is that if i enable a plugin or change some keys, i don't know when or how to apply them. === FusE-- [n=Cole@adsl-69-234-143-105.dsl.irvnca.pacbell.net] has joined #ubuntu [03:33] <|gnurph|> wireless? any wireless.gurus out there? even wireless.amateurs? === kb0odu [n=kb0odu@dsl001-133-246.pdx1.dsl.speakeasy.net] has joined #ubuntu === realnewguy [n=xen@ip-58-28-153-202.ubs-dsl.xnet.co.nz] has joined #ubuntu [03:33] the problem is that i am getting bad refresh rates [03:33] There is no, "Apply" button. [03:33] if i reinstall ubuntu can bittorrent resume a download i started from a previous install? [03:33] greetings, everyone. I'm having a bit of difficulty with bind9.3.2 not resolving short names. It will resolve fqdn on the internal network, but not the short or system name. any suggestions? [03:33] and it must be because the monitor settings [03:33] wtf man, this beryl is just not working :S ive installed it but absolutly nothing is happening?? [03:34] stefano: it happens straight away..... when you enable 3D drivers you should notice the shadows and window effects already without the config [03:34] Pelo: err to what you said before (compiz-fusion uses less resources) === forgetso [n=chris@82-41-27-36.cable.ubr04.edin.blueyonder.co.uk] has joined #ubuntu [03:34] Aminux, check the label on the back of your monitor , you can edit xorg.conf and change the Horizsyng and vertrez values to match [03:34] lets see [03:34] m0u5e, oh, yes sorry, busy channel, ( busy helper actualy) and I'm not up on american slang [03:34] hey, fonts in openoffice.org word are horrible, i can see a topic on it in the bug database, but I was just wondering if someones had this issue and managed to fix it === FB7682 [n=FB7682@c-68-36-31-59.hsd1.nj.comcast.net] has joined #ubuntu [03:34] stefano: wobble isn't on by default but as soon as GL is set up the shadows appear and windows fade etc === HLM [n=4Q2@S01060010dc7ffbeb.no.shawcable.net] has joined #ubuntu [03:34] Aminux: or run sudo dpkg-reconfigure xserver-xorg === Coole^ [n=justin@71-212-52-231.tukw.qwest.net] has joined #ubuntu [03:35] Pelo: i just mean, (i agree whole heartedly) [03:35] Pelo lol === FB7682 [n=FB7682@c-68-36-31-59.hsd1.nj.comcast.net] has left #ubuntu [] [03:35] serenityUK, yes i see the shadows and all the default plugins enabled. What i want is to change something, like a key comb for some effect, but don't know how to apply it. [03:35] mneptok, that would defeat the purpose it would restore defaults [03:35] m0u5e, I figured it out eventualy === PJ [n=pjcrump@c-69-180-173-192.hsd1.mn.comcast.net] has joined #ubuntu [03:35] Pelo: what defaults? [03:36] stefano: as I say it normally happens as soon as you pick... can you turn the cube on.. there are two rotate cube and cube 3D [03:36] heeeeeeeeeeeeeeeeeeeeelp [03:36] i ve prop [03:36] Pelo: reconfigure allows you to choose driver, monitor geometry, and resolutions. [03:36] anyone know how to insist ether packets use SNAP? [03:36] mneptok, fine, take over === jearsh [n=jearsh@adsl-8-185-67.mia.bellsouth.net] has joined #ubuntu [03:36] fonts in openoffice.org word are horrible, i can see a topic on it in the bug database, but I was just wondering if someones had this issue and managed to fix it [03:36] E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem. === emet [n=emet@unaffiliated/emet] has joined #ubuntu [03:37] Pelo: i was just offering an alternate solution. [03:37] serenityUK, lol... well its ok. I am sure that after i restart the settings will be applied. lol and i thought there was no reason at all to restart linux. [03:37] can any body tel me what is this prop E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem. === goldbond [n=walsh@74-142-8-169.dhcp.insightbb.com] has joined #ubuntu [03:37] Binlafy, then open a terminal and type sudo dpkg --configure -a === fiveiron [n=fiveiron@74-137-162-129.dhcp.insightbb.com] has joined #ubuntu [03:37] !helpme | Binlafy [03:37] Binlafy: Don't ask to ask a question. Just ask your question :) [03:37] I did it but dosent work [03:37] all i see there is 50hz 60hz on the back of the monitor === errdil [n=errdil@pool-71-251-41-243.nwrknj.east.verizon.net] has joined #ubuntu === kb0odu [n=kb0odu@dsl001-133-246.pdx1.dsl.speakeasy.net] has left #ubuntu [] [03:37] oh, nm === ionstorm [n=ion@70-58-119-250.phnx.qwest.net] has joined #ubuntu === daprie [n=daprie@72.166.167.86] has joined #ubuntu === forgetso [n=chris@82-41-27-36.cable.ubr04.edin.blueyonder.co.uk] has joined #ubuntu [03:38] fonts in openoffice.org word are horrible, i can see a topic on it in the bug database, but I was just wondering if someones had this issue and managed to fix it [03:38] Aminux, then ensure that the range of both horiz sync and vert res don'T go higher, that should solve it [03:38] qq [03:39] Binlafy: did you use sudo? === jacob [n=jacob@ool-182c95bc.dyn.optonline.net] has joined #ubuntu [03:39] yes daprie ? [03:39] how do you boot directly to a command line and bypass the GUI altogether [03:39] yes I did === witf [n=no@71-81-56-61.dhcp.slid.la.charter.com] has joined #ubuntu [03:39] hmm whats the command to detect all other computers on the network and print information such as IP addresses, names, etc? [03:39] but dosnt work === PP188 [n=pedro@201-42-170-224.dsl.telesp.net.br] has joined #ubuntu [03:39] daprie: choose recovery mode from the grub menu [03:39] daprie, you can boot the recovery mode, or if you intend to run cli all the time , you can edit the menu.lst file to remove the gui option === DerangedDingo [n=john@24-113-250-73.wavecable.com] has left #ubuntu [] [03:40] btw pelo the alternate disk got the OS installed, but I still can't get that video card to work === jplove71 [n=jplove@c-24-118-247-51.hsd1.mn.comcast.net] has joined #ubuntu === MindfulGeek [n=joep@dhcp-0-13-10-99-17-2f.cpe.townisp.com] has left #ubuntu [] [03:40] daprie, menu > system > admin > restricted modules [03:40] <|gnurph|> i thought the recovery mode didn't load much more than the kernel? [03:40] thx, I'll try that serenityUK [03:40] can the command: tar -xvvzf filename.tar.gz be used for tar.gz2 files? [03:40] daprie, if that doesn'T work there are otehr options === voidmage-away [n=voidmage@su62.eastnet.gatech.edu] has joined #ubuntu === runeword [n=runeword@64.8.90.6] has joined #ubuntu === Crustacean-Bob [n=moneyman@cpe-66-67-154-20.rochester.res.rr.com] has joined #ubuntu [03:40] daprie, do you get to the gui with a vesa driver ? [03:41] I can't actually see anything to go to a menu [03:41] ....anybody? [03:41] jacob: just drop the z for bzip2 === nickrud [n=nickrud_@adsl-69-230-161-27.dsl.irvnca.pacbell.net] has joined #ubuntu [03:41] I don't know [03:41] Whats the command to show what packages are installed. using ubuntu server 6.10 === chuy_max [n=chuy@201-167-90-32-cable.cybercable.net.mx] has joined #ubuntu === EdibleEgg_ [n=alex@cpe-071-068-020-166.carolina.res.rr.com] has joined #ubuntu [03:41] I installed ubunto in a text-based env [03:41] daprie, from the command line sudo dpkg-reconfigure xserver-xorg === Pthag [n=pthag@dyn-62-56-125-151.dslaccess.co.uk] has joined #ubuntu [03:41] Setting up hsfmodem (7.60.00.06oem) ... [03:41] Conexant HSF softmodem driver, version 7.60.00.06oem [03:41] If you need assistance or more information, please go to: [03:41] http://www.linuxant.com/ [03:41] When reporting a problem for the first time, please send [03:41] us the file generated by "hsfconfig --dumpdiag". [03:41] No pre-built modules for: Ubuntu-7.04 linux-2.6.20-16-generic i686-SMP === _Ulver_ [n=Genebild@201.50.190.195] has joined #ubuntu === Aminux [n=luis@bl7-244-210.dsl.telepac.pt] has left #ubuntu [] [03:41] Trying to automatically build the driver modules... [03:42] jacob: there is no hyphen either tar xvf some.tar.gz2 or tar zvxf some.tar.gz [03:42] (this requires a C compiler and proper kernel sources to be installed) [03:42] Where is the linux source build directory that matches your running kernel? [03:42] [/lib/modules/2.6.20-16-generic/build] === mode/#ubuntu [+o jrib] by ChanServ === Binlafy [n=hasan@77.64.46.55] has left #ubuntu [requested] === mode/#ubuntu [-o jrib] by jrib [03:42] daprie, the alternate cd install in txt base but it installs the full gui [03:42] I was going to try that but I can't see the anything on the screen if it's anything other than text === pbsMind [n=jarcon@adsl-69-226-36-106.dsl.irvnca.pacbell.net] has joined #ubuntu [03:42] it's all just jumbled color blocks [03:42] daprie, just incase you missed it === mbt [n=mbt@c-24-30-33-42.hsd1.ga.comcast.net] has joined #ubuntu [03:42] daprie, from the command line sudo dpkg-reconfigure xserver-xorg [03:42] daprie: what video card? [03:43] Is there a way to build a clean kernel, with the exact same options as the Ubuntu team uses to build it? === SineFato [n=sine@cpe-66-27-145-133.socal.res.rr.com] has joined #ubuntu [03:43] EVGA Nvidia 6800 GS [03:43] mbt this is linux , the answer is yes, don't ask "me" how [03:43] Excuse me, this sounds stupid but how do you figure out the exact version of ubuntu you have? === innocunus [n=ubuntu@adsl-75-45-173-153.dsl.sfldmi.sbcglobal.net] has joined #ubuntu [03:43] witf, dpkg --get-selections === chief [n=chief@74-141-216-81.dhcp.insightbb.com] has joined #ubuntu [03:43] thanks [03:44] SineFato: lsb_release -v [03:44] mtb http://ubuntuforums.org/showthread.php?t=311158 === jplove71 [n=jplove@c-24-118-247-51.hsd1.mn.comcast.net] has joined #ubuntu [03:44] mbt: download the source, and the config options are in /boot/config-* . Use the tools in kernel-package === Olipro [n=Olipro@unaffiliated/olipro] has joined #ubuntu [03:44] errr [03:44] SineFato: lsb_release -a === Binlafy [n=hasan@77.64.46.55] has joined #ubuntu === nickrud has no intention of doing that himself, however === Pie-rate [n=jschall@cust-69-19-214-178.static.o1.com] has joined #ubuntu [03:44] evening [03:44] anyone know how to insist ether packets use SNAP? === IndyGunFreak [n=ken@user-0cdv00n.cable.mindspring.com] has joined #ubuntu [03:44] yeah pelo I was going to try that, butI can't figure out how to boot directly to command line and bypass the GUI for umbuntu altogether [03:44] how to install c compiler [03:44] mneptok: awsome thanks === HLM [n=4Q2@S01060010dc7ffbeb.no.shawcable.net] has left #ubuntu [] [03:44] <|gnurph|> my wireless card won't function unless I fiddle with it. Can somebody point me in the right direction to try and troubleshoot? [03:44] SineFato: np === Skycloud [n=jason@pool-71-111-89-217.ptldor.dsl-w.verizon.net] has joined #ubuntu === Pukahan [n=stimscri@c-71-56-173-21.hsd1.va.comcast.net] has joined #ubuntu === BalloonS|off [n=loool@CPE-72-128-21-227.kc.res.rr.com] has joined #ubuntu === KIKOOOOOOO [n=dudette@74-128-155-93.dhcp.insightbb.com] has joined #ubuntu === cerewet [n=stretch@cpc1-midd7-0-0-cust573.midd.cable.ntl.com] has joined #ubuntu === indra_eui [n=dreaman5@85.12.25.105] has joined #ubuntu === eve_Lady [n=qball216@67.126.87.100] has joined #ubuntu === BINUSHACKER [n=barbra18@ool-4354ae86.dyn.optonline.net] has joined #ubuntu === KungFu [n=justgooi@84-217-108-36.tn.glocalnet.net] has joined #ubuntu === Terakhir [n=lg-frien@c-24-131-212-124.hsd1.oh.comcast.net] has joined #ubuntu === cyber[_] crime [n=cutepeng@ool-4354ae86.dyn.optonline.net] has joined #ubuntu === BUL4N [n=rochelle@host79.190-31-35.telecom.net.ar] has joined #ubuntu === Ce_Maanyan [n=eucjjo@host195.190-30-160.telecom.net.ar] has joined #ubuntu === co_msh_di [n=kuledude@c-24-131-212-124.hsd1.oh.comcast.net] has joined #ubuntu [03:45] Binlafy: sudo apt-get install build-essential === DidiDt [n=lajajaj@adsl-64-149-46-182.dsl.tul2ok.sbcglobal.net] has joined #ubuntu === Shannon [n=j4y_z@wvps212-241-211-39.vps.webfusion.co.uk] has joined #ubuntu === wilsonz [n=mp3bestn@ltc56-1-82-246-52-14.fbx.proxad.net] has joined #ubuntu === CuteKittie[A] [n=kacey27@68.42.195.62] has joined #ubuntu === Wassini [n=kjjjjkjj@adsl-67-37-177-68.dsl.chcgil.ameritech.net] has joined #ubuntu === MdM`LeEd [n=sutcliff@69.37.122.42] has joined #ubuntu === MaLe_UpPeR40s_US [n=mastero@69.37.122.42] has joined #ubuntu === AnDrIDepOK [n=demi-lee@82-43-99-163.cable.ubr09.croy.blueyonder.co.uk] has joined #ubuntu === Lady`Avisha [n=pphnup@c-75-66-212-112.hsd1.tn.comcast.net] has joined #ubuntu === chub4older-JB [n=mjm@ool-44c26f43.dyn.optonline.net] has joined #ubuntu === YuNeRo [n=b1nky@c-71-200-14-191.hsd1.md.comcast.net] has joined #ubuntu === CO^brutal [n=cichlid@24-159-249-200.dhcp.mdsn.wi.charter.com] has joined #ubuntu === three-to-one [n=gametrip@82-45-20-212.cable.ubr01.stav.blueyonder.co.uk] has joined #ubuntu === _POM_PONK [n=cqvgwr@82-45-20-212.cable.ubr01.stav.blueyonder.co.uk] has joined #ubuntu === PreferIndMen [n=charmie_@66-191-159-174.dhcp.mtgm.al.charter.com] has joined #ubuntu [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === B|TCH [n=vaughn@adsl-70-238-248-64.dsl.bcvloh.sbcglobal.net] has joined #ubuntu [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === AmirsAlice [n=phl^spct@cpe-76-87-204-188.socal.res.rr.com] has joined #ubuntu [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === tyrant [n=ynoz@adsl-75-18-202-136.dsl.pltn13.sbcglobal.net] has joined #ubuntu [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === LeeSyeLa [n=goregrin@24-176-35-175.dhcp.klmz.mi.charter.com] has joined #ubuntu [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === kev_cam [n=krisboi@CPE-124-191-18-146.vic.bigpond.net.au] has joined #ubuntu [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === David_Wu|TiBa2_M [n=gneisena@katy-adsl-66-170-199-16.consolidated.net] has joined #ubuntu === skateboard [n=sadwinte@pool-71-114-190-159.trrhin.dsl-w.verizon.net] has joined #ubuntu === Kapolri [n=mack107@c-69-254-33-235.hsd1.fl.comcast.net] has joined #ubuntu [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === Ce_Banjar [n=brn^wils@c-24-23-141-206.hsd1.mn.comcast.net] has joined #ubuntu === zAhriE [n=galaxy-8@c-24-23-141-206.hsd1.mn.comcast.net] has joined #ubuntu === R|ndu [n=charmie_@c-71-236-45-61.hsd1.tn.comcast.net] has joined #ubuntu === oyonk [n=fut0fru@ip70-160-16-254.hr.hr.cox.net] has joined #ubuntu [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === kl_chi_wmaju [n=isiahgeo@cpe-70-117-16-210.satx.res.rr.com] has joined #ubuntu === Kr[a] zC|ub [n=kevinn@ool-4579394c.dyn.optonline.net] has joined #ubuntu [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] <_POM_PONK> DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === KL33oUg_Seek_You [n=xhvkfcc@c-75-75-62-193.hsd1.va.comcast.net] has joined #ubuntu [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === mode/#ubuntu [+o jrib] by ChanServ [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === pinkey [n=siera04@pool-71-111-22-31.ptldor.dsl-w.verizon.net] has joined #ubuntu === JhOnN [n=icer01@c-69-250-97-8.hsd1.dc.comcast.net] has joined #ubuntu [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] nickrud, serenityUK: Thank you both. [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === mjrd273 [n=markass@c75-111-98-70.amrlcmta01.tx.dh.suddenlink.net] has joined #ubuntu [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === co_lutchu [n=sdoihfsj@c-68-57-132-132.hsd1.va.comcast.net] has joined #ubuntu [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === CyberBox [n=ivory27@r74-192-61-193.vctrcmta01.vctatx.tl.dh.suddenlink.net] has joined #ubuntu [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW [03:45] DCC SEND OWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREWOWNEDBYGOATSECREW === mode/#ubuntu [+Rr] by jrib === mode/#ubuntu [+o mneptok] by ChanServ === mode/#ubuntu [+R] by mneptok [03:45] Binlafy: sudo apt-get install build-essential [03:45] banstick === tyrant [n=ynoz@adsl-75-18-202-136.dsl.pltn13.sbcglobal.net] has left #ubuntu [] === co_lutchu [n=sdoihfsj@c-68-57-132-132.hsd1.va.comcast.net] has left #ubuntu [] === R|ndu [n=charmie_@c-71-236-45-61.hsd1.tn.comcast.net] has left #ubuntu [] === mjrd273 [n=markass@c75-111-98-70.amrlcmta01.tx.dh.suddenlink.net] has left #ubuntu [] === David_Wu|TiBa2_M [n=gneisena@katy-adsl-66-170-199-16.consolidated.net] has left #ubuntu [] === CyberBox [n=ivory27@r74-192-61-193.vctrcmta01.vctatx.tl.dh.suddenlink.net] has left #ubuntu [] === PreferIndMen [n=charmie_@66-191-159-174.dhcp.mtgm.al.charter.com] has left #ubuntu [] === Ce_Banjar [n=brn^wils@c-24-23-141-206.hsd1.mn.comcast.net] has left #ubuntu [] === pinkey [n=siera04@pool-71-111-22-31.ptldor.dsl-w.verizon.net] has left #ubuntu [] === skateboard [n=sadwinte@pool-71-114-190-159.trrhin.dsl-w.verizon.net] has left #ubuntu [] === zAhriE [n=galaxy-8@c-24-23-141-206.hsd1.mn.comcast.net] has left #ubuntu [] === Kapolri [n=mack107@c-69-254-33-235.hsd1.fl.comcast.net] has left #ubuntu [] === kl_chi_wmaju [n=isiahgeo@cpe-70-117-16-210.satx.res.rr.com] has left #ubuntu [] === chub4older-JB [n=mjm@ool-44c26f43.dyn.optonline.net] has left #ubuntu [] === oyonk [n=fut0fru@ip70-160-16-254.hr.hr.cox.net] has left #ubuntu [] === LeeSyeLa [n=goregrin@24-176-35-175.dhcp.klmz.mi.charter.com] has left #ubuntu [] === B|TCH [n=vaughn@adsl-70-238-248-64.dsl.bcvloh.sbcglobal.net] has left #ubuntu [] [03:45] oh, I'd never use pristine kernel sources. they are *rough* === FFighter [i=FFighter@189.7.180.93] has joined #ubuntu [03:45] daprie, when you boot , do you get the grub boot menu ? === riddlebox [n=james@ppp-70-225-67-135.dsl.covlil.ameritech.net] has joined #ubuntu === mode/#ubuntu [-R] by jrib [03:45] man, i get here right when the netsplit starts, what are the odds. [03:45] erm [03:45] DCC SEND? [03:45] how to go to a specific line in vi ? [03:45] how to install c compiler [03:45] nickrud, serenityUK: Thank you both. [03:45] jrib? [03:45] mbt: yw [03:45] IndyGunFreak, that wasn't a netsplit [03:45] nope === czedlitz [n=czedlitz@ip70-161-73-17.hr.hr.cox.net] has joined #ubuntu [03:45] how to install c compiler [03:45] mneptok: k-lines flew by [03:45] mbt: that page is the master kernel thread on the ubuntu forums highly recommended you bookmark it [03:45] oh ok, saw all the people loggig back in, thought i missed on [03:46] Binlafy: use build-essential [03:46] Binlafy: sudo apt-get install build-essential [03:46] !info build-essential | Binlafy [03:46] binlafy: build-essential: informational list of build-essential packages. In component main, is optional. Version 11.3 (feisty), package size 6 kB, installed size 48 kB [03:46] jrib: yeah, i saw. wondering about your "erm" [03:46] I hit Alt+F4... not sure what that is suppose to do but I got a prompt === idaho45 [n=idaho@190.75.104.119] has joined #ubuntu === h1st0 [n=histo@h156.112.29.71.ip.alltel.net] has joined #ubuntu [03:46] Binlafy: what are you trying to compile? === michaelpo [n=presario@60.51.16.93] has left #ubuntu [] [03:46] serenityUK, Thank you so much -- I just need to change one line of source, but need to retain the exact config otherwise, for a piece of broken hardware. I don't know how I didn't find that link already. [03:46] Thank you! [03:46] mneptok: I -R and then got ServerMode/#ubuntu [+R] by irc.freenode.net [03:46] daprie, ok at some point when you boot ( stay at the comp) you'll get a short msg hit esc , that will get you the boot menu, select the second option , that's the recovery mode [03:46] jrib: inter-server lag. [03:46] that was some warecraft kids doing a raiding party === mode/#ubuntu [-Rr] by jrib [03:46] Binlafy, sudo apt-get install build-essential [03:47] its really kind of silly how an invalid "dcc send" command can own certain routers. i bet they're made by netgear! [03:47] how to install c compiler === profXavier is now known as wolferine === [LUCIAN] [n=IndyLuci@cpe-24-166-5-163.indy.res.rr.com] has joined #ubuntu === SineFato [n=sine@cpe-66-27-145-133.socal.res.rr.com] has left #ubuntu [] [03:47] Binlafy: sudo apt-get install build-essential === freenut__ [n=james@c-76-24-210-208.hsd1.ma.comcast.net] has joined #ubuntu [03:47] Binlafy: open a Applications->Accessories->Terminal and type sudo apt-get install build-essential === HymnToLife` [n=fkraiem@unaffiliated/hymntolife] has joined #ubuntu === realnewguy [n=xen@ip-58-28-153-202.ubs-dsl.xnet.co.nz] has left #ubuntu [] [03:47] he has been told more than once [03:48] fonts in openoffice.org word are horrible, i can see a topic on it in the bug database, but I was just wondering if someones had this issue and managed to fix it === mode/#ubuntu [-o mneptok] by mneptok === ajwo [n=alejandr@c-71-56-206-209.hsd1.co.comcast.net] has joined #ubuntu [03:48] trying your previous suggestion now pelo (the sudo one) [03:48] tigran, in synaptic do a search for fonts, there are others you can install [03:48] daprie, you'll need the command line , ei the recovery mode [03:48] i need Times New Roman [03:49] daprie, best of luck === boontoo [n=david@203.209.197.10] has joined #ubuntu [03:49] Pelo: I need times new roman, school standard stuff === Xero [n=xero9364@c-24-126-30-244.hsd1.wv.comcast.net] has joined #ubuntu === Snipe [n=none@adsl-4-158-40.gsp.bellsouth.net] has joined #ubuntu [03:49] Hello people [03:49] Pelo: and times new roman looks choppy [03:49] Hello [03:49] tigran, tehre is a packate for microsoft fonts , don'T recall the name, do what I said you,ll find it [03:49] \join #python === pearlbear [n=mpm@72.170.214.38] has left #ubuntu ["bu] === _aaa [n=dac@tx-76-6-82-14.dhcp.embarqhsd.net] has joined #ubuntu === Zemus [n=Yeti@unaffiliated/zemus] has joined #ubuntu [03:49] tigran mstcorefonts i belive is package [03:49] tigran, that might just be your monitor and resolutions, did you try and print ? === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has joined #ubuntu [03:49] damn i cant get my sound card to work anymore anyone know why? its just after i updated threw synaptics, just some librarys i think, can anyone help? [03:49] tigran: is your TNR a TrueType font? [03:49] <|gnurph|> still having strange wireless problems - it connects only after I turn the wireless NIC on and off. any ideas? === lansen [n=sanjay@74.120.187.144] has left #ubuntu ["Konversation] [03:50] Pelo: I've installed the ms core fonts, but they look choppy in openoffice.org word [03:50] tigran: you on an lcd? [03:50] Frozgzoo: Yes === afterburn188 [n=steve@host29-182.student.udel.edu] has joined #ubuntu [03:50] tigran, laptop ? lcd monitor ? [03:50] root@hasan-laptop:~# sudo apt-get install build-essential [03:50] E: Could not get lock /var/lib/dpkg/lock - open (11 Resource temporarily unavailable) [03:50] E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it? [03:50] tigran: you enable sub pixedl rendering? === threefcata [n=threefca@202.161.43.236] has joined #ubuntu === afterburn188 [n=steve@host29-182.student.udel.edu] has joined #ubuntu [03:50] Hey, is there a decent media player for linux / gnome that handles winamp 5 skins? ("why would you want one" is not an answer) Thanks! :) [03:50] tigran, menu > system > prefs > fonts > subpixel [03:50] Binlafy: stop pasting to the channel or you will be banned [03:50] Binlafy: close synaptic first, you can only use one package manager at at time === Crustacean-Bob [n=moneyman@cpe-66-67-154-20.rochester.res.rr.com] has left #ubuntu [] [03:50] I'm tryng to install ubuntu and I have a question about partitioning, can someone help me? [03:50] <_aaa> boontoo, I had to turn my volume up to 92% [03:50] Frogzoo: Yes, my fonts are fine in gnome, its just in openoffice.org that looks bad [03:50] Binlafy: 1) don't paste - 2) you've another package manager open - like synaptic [03:50] Snipe: what is your question? [03:51] Zemus: xmms can do winamp skins so can beep media player === huang [n=huang@202.114.78.205] has joined #ubuntu [03:51] tigran: enable sub pixedl rendering [03:51] serenityUK, I think it can only do classic skins though, right? winamp 2 skins? [03:51] tigran, check in the OOo options , under tools, or try asking in #openoffice.org [03:51] beep media player I will check out, thanks === danielronin [n=chatzill@24-216-186-158.dhcp.stls.mo.charter.com] has joined #ubuntu [03:51] I didnt open synpatic [03:51] _aaa: well theres a Red x on my volume like its muted but when i try to double click it says "no volume control GStreamer plugins and/or devices found." [03:51] tigran: what does the bug chatter say? [03:51] Binlafy, when logged in as root, there is no need to put sudo at the beginning of a command === NastyAccident [n=NastyAcc@unaffiliated/nastyaccident] has joined #ubuntu [03:51] Frogzoo: subpixel rendering is enabled, like i said my fonts are fine, they're just bad in word [03:51] I'm ready to install and I want to take my hdd and be able to do dual booting ....XP and Ub [03:51] and else I cant go in synpatic [03:51] Zemus: uhhh .... [03:52] Snipe: the easiest way to do this is to use Wubi [03:52] Snipe, do you already have xp installed ? === ari_stress [n=tiger74@125.161.198.30] has joined #ubuntu [03:52] Binlafy, i think your confused [03:52] I'll ask in #openoffice.org [03:52] Zemus: you're right. "why would you want one" is a question, not an answer ;) [03:52] wubi? can yo clarify [03:52] mneptok, ;) [03:52] explane it === Thegeektechnique [n=geek@ip70-178-247-42.ks.ks.cox.net] has left #ubuntu [] === mode/#ubuntu [+bbbb *!*@pool-71-111-89-217.ptldor.dsl-w.verizon.net!#ubuntu-read-topic *!*@c-76-24-210-208.hsd1.ma.comcast.net!#ubuntu-read-topic *!*@c-67-166-15-168.hsd1.co.comcast.net!#ubuntu-read-topic *!*@ppp-70-225-67-135.dsl.covlil.ameritech.net!#ubuntu-read-topic] by jrib [03:52] Binlafy, explain what? [03:52] Snipe: Wubi is a windows based installer for Ubuntu that automatically sets up dual-booting [03:52] yes I've been using XP since I got the laptop === mode/#ubuntu [+b *!*@ip70-161-73-17.hr.hr.cox.net!#ubuntu-read-topic] by jrib === mode/#ubuntu [-t] by jrib === mode/#ubuntu [+t] by ChanServ [03:52] confused [03:52] Snipe: but if you want a more traditional approach, we can help you here [03:53] morning all [03:53] Binlafy, its in the dictionary, you can find that yourself [03:53] Binlafy, if you decide to install something through command line you must close synaptic first. [03:53] <_aaa> boontoo, click the red x and unmute, I'm not very smart... [03:53] hello all :^). is there anyone here that can give me a hand installing another distro to an existing kubuntu install, and configuring GRUB to make the boot option? [03:53] I'm on a friends pc talking to younow === freeAgent [n=ask@c-68-50-54-197.hsd1.va.comcast.net] has joined #ubuntu [03:53] Zemus: have you tried some of the native players? Amarok? Rhythmbox? Banshee? Quod Libet? [03:53] I closed it [03:53] Snipe, I think you should just dl the live cd and proceed with that, the installation is very convivial , it will help you resize the windows partition and it will make a boot menu for you [03:53] mneptok, sure, I just like my old skins ;) [03:53] _aaa: cant unmute it, i also get an error audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Could not open resource for writing. [03:53] Zemus: i ask because Winamp-like apps simply will not work for my music collection. === freenut__ was kicked off #ubuntu by jrib (please read the topic in #ubuntu-read-topic) [03:53] Binlafy: maybe it's because you are already root, try without sudo [03:53] Snipe: here is more information on wubi: http://wubi-installer.org/ (also, when you're talking to us, can you attach our username so our chat programs highlight the line?) === rnavarro [n=rnavarro@cebu.exist.com] has joined #ubuntu [03:54] hello, is an intel duo core notebook 64bit system? [03:54] danielronin: simply point the new distro at the partition that has kubuntu. What issues do you think you might have with grub? === CineScope [n=the_road@mo-67-77-182-254.sta.embarqhsd.net] has joined #ubuntu [03:54] I bought the Official ubuntu book and I have an awesome dvd that came with i === SpudDogg [n=spuddogg@c-76-109-159-194.hsd1.fl.comcast.net] has joined #ubuntu [03:54] mneptok, really? That's interesting, I've been using it *very* comfortably for years, and I have about 8,300 mp3's. [03:54] mneptok: What's so special about your collection? [03:54] Pelo, what would be the advantade of using wubi? [03:54] Zemus: i have 40,000 === jplove71 [n=jplove@c-24-118-247-51.hsd1.mn.comcast.net] has joined #ubuntu === huang [n=huang@202.114.78.205] has left #ubuntu ["Ex-Chat"] [03:54] Snipe, I don'T know if that is the install dvd but if it is you can install from that also [03:54] no i don't want to wipe kubuntu, i want to add a boot option [03:54] danielronin: er, you replacing kbuntu or putting it next to [03:54] mneptok, awesome, lets engage in oral s.... oh that's right. #ubuntu. xD Sorry! [03:54] mneptok: well what do you use then? [03:54] the problem is .....it shows an option in the book that is not available on the dvd === kintaro0e [n=kintaro0@cebu.exist.com] has joined #ubuntu === Moniker42 [n=sean1228@87-194-119-253.bethere.co.uk] has joined #ubuntu [03:54] i'm installing a live cd next to it [03:54] the prob is started to download the dif for my modem from dell then I Install it but the termenal said need to c compiler [03:54] lol, can you believe it === masterloki [n=mloki@75.80.5.221] has joined #ubuntu === Partizx [n=Partizx@220.110.142.38] has joined #ubuntu [03:55] Zemus: "I like you, but only as a friend etc etc etc" ;) [03:55] how do i check if a specific port number is being used by anything? === rnavarro_ [n=rnavarro@cebu.exist.com] has joined #ubuntu [03:55] Excalibas, I didn't recommend the wubi but some ppl don'T have working cdrom so wubi is an option [03:55] <|gnurph|> how do I access a Windows system drive with Ubuntu (lets not ask why, and "overwrite it with Ubuntu" isn't an option) [03:55] Snipe: what option are you talking abut? [03:55] Moniker42: netstat [03:55] h1st0: Rhythmbox, like a good GNOME drone. === sebsebseb [n=sebastia@82-46-9-58.cable.ubr05.azte.blueyonder.co.uk] has joined #ubuntu [03:55] danielronin: ok, just don't have the new partition write to the mbr. Then, base a stanza in kubuntu's menu.lst on the menu.lst the new distro creates. === atha [n=atha@222.124.138.114] has joined #ubuntu [03:55] mneptok, ;) gyahahha === d4ft [n=d4ft@24-241-6-113.dhcp.buft.sc.charter.com] has joined #ubuntu === edz [n=edz@adsl-69-151-200-102.dsl.hstntx.swbell.net] has joined #ubuntu === riddlebox was kicked off #ubuntu by jrib (please read the topic in #ubuntu-read-topic) [03:55] mneptok: I'm a mindless gnome drone as well. [03:55] mneptok, how's Canonical treating you these days? === mode/#ubuntu [-o jrib] by jrib [03:55] guided resize ide1 [03:55] anyone? [03:55] ahhh, but the new distro uses lilo, therein lies the problem [03:56] mneptok: Thinking bout checkout mpd though === Pelo wonders if jrib is having fun === jhuangtw [n=jhuangtw@c-68-40-85-145.hsd1.mi.comcast.net] has joined #ubuntu [03:56] can someone help me install ati drivers for fiesty [03:56] it has guided using entire disk === h1st0 wonders why pelo cares [03:56] danielronin: it's translatable. Key issue, no write to mbr [03:56] boontoo, when you don't get an answer restate your problem === manikfox [n=manikfox@d226-26-220.home.cgocable.net] has joined #ubuntu [03:56] the prob is started to download the dif for my modem from dell then I Install it but the termenal said need to c compiler [03:56] Zemus: somewhere between "like the demi-God i truly am" and "dirt." typical. [03:56] !ati | edz === |gnurph| is now known as CluelessFred [03:56] edz: To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto [03:56] guided use largest [03:56] !ati | edz [03:56] !ati > edz check for a private message windows with instructions from ubotu [03:56] and manual [03:56] Pelo: not really :/ [03:56] if i manually make an entry in menu.lst, where do i have to point the it? [03:56] mneptok, xD [03:56] <_aaa> boontoo, I also had to reinstall from a CD again, but igo from KDE to Gnome back and forth once or twice a week just for the hell of it... [03:56] daprie, I donT' allow private msg please talk tome in the channel [03:56] it shows 4 options in the book and only 3 show up [03:57] the prob is started to download the dif for my modem from dell then I Install it but the termenal said need to c compiler [03:57] Pelo: my sound used to work fine, but after ubuntu ran some automatic updates with synaptics my sound doesn't work, when i open up sound properties and try and test the alsamixer i get this error: audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Could not open resource for writing. === ectospasm [n=ectospas@c-68-62-214-17.hsd1.al.comcast.net] has joined #ubuntu [03:57] ok, I got recovery mode to work [03:57] danielronin: you'd point the stanza at the kernel on the other partition. Look at the ones you already have. === jhuangtw [n=jhuangtw@c-68-40-85-145.hsd1.mi.comcast.net] has joined #ubuntu [03:57] of course the one I need to use is the one that's missing === jplove71 [n=jplove@c-24-118-247-51.hsd1.mn.comcast.net] has joined #ubuntu === taime1 [n=chatzill@wsip-70-182-255-181.ks.ks.cox.net] has joined #ubuntu [03:57] Snipe, step back to the desktop, in system > admin> gnome partition editor , you can rezise yoru windows partition to make room to install ubuntu [03:58] danielronin: do the install, don't write the mbr, and when you're done a lot of people here can help you translate lilo to grub [03:58] if i go from an nvidia nforce 2 to an nvidia geforce 7600, will i need to reconfigure x or install a new driver? [03:58] or should the existing proprietary driver communicate just fine? [03:58] Pelo, i like the idea of an install widouth CD, it is 3am in Portugal and I dont have blank CD at home you think there are any drawbacks on using wubi? [03:58] boontoo, search the first part fo the msg in the forum, ( I think it 's a bit too long,) or boot the previous kernel [03:58] should I exit the install menu 1st???? [03:58] daprie, do you need the command again ? === nomasteryoda [n=nomaster@ip72-210-64-240.mc.at.cox.net] has joined #ubuntu [03:58] the prob is started to download the dif for my modem from dell then I Install it but the termenal said need to c compiler [03:58] nickrud: thanks :) === jplove71 [n=jplove@c-24-118-247-51.hsd1.mn.comcast.net] has joined #ubuntu [03:58] one more questions though... [03:59] one questions ?! ;) [03:59] typo [03:59] Excalibas, I donT Know I've never used it , and I 've never recommended it, I have no idea why you keep asking me about it === wolfsong [n=Wolfsong@cpe-67-9-242-19.tx.res.rr.com] has joined #ubuntu [03:59] I have gnome part. manager opened [03:59] taime1: you may want to use the latest driver to get more frames per second but it should still work === lerio [n=lerio@222.127.59.62] has joined #ubuntu === dirtblac1 [n=dana@ip68-231-94-48.ph.ph.cox.net] has joined #ubuntu [03:59] will i have to rename these other partitions, or can i have multiple /, usr, home etc on the same drive? === left1 [n=sean@ip70-179-112-120.dc.dc.cox.net] has left #ubuntu [] === mherzogmtg [n=administ@74-132-60-61.dhcp.insightbb.com] has joined #ubuntu [03:59] as long as the bootloader points to right one is that ok? [04:00] nah i got the command [04:00] serenityUK: i dont suppose a new driver has been released since a few months ago eh? [04:00] guys what is the stable version of ubuntu dapper or feisty [04:00] Snipe, select the hdd, select the partition, right lick , resize, there is a slider , resize so you hvae enough room for ubuntu , validate and apply [04:00] guys ......did I miss some info from you [04:00] liero: fiesty [04:00] ok === ziggy [n=ziggy@71-212-98-98.tukw.qwest.net] has joined #ubuntu [04:00] danielronin: as long as you leave any partitions that ubuntu is using alone, you can use any other partition in any way you like. They will be autonomus [04:00] typo ;) === edz [n=edz@adsl-69-151-200-102.dsl.hstntx.swbell.net] has joined #ubuntu [04:00] Whos Really good with Bery ???? [04:00] liero, they both stable [04:00] should I have it automatically detect my video hardware? [04:00] liero: we'll technically they're both stable, but fiesty is the latest [04:00] Can anybody help me install the Java Runtime Environment? Im a newby, and I can only download as a binary file, but it won't install as a binary [04:00] help ati drivers [04:00] !java > mherzogmtg (see the private message from ubotu) [04:00] Whos Really good with Bery ???? [04:00] daprie, try it === chris_ [n=chris@82-41-27-36.cable.ubr04.edin.blueyonder.co.uk] has joined #ubuntu [04:01] ziggy: #ubuntu-effects [04:01] ok there has to be a way to fix this bug where windows are always drawn at 0,0 "behind" the top panel [04:01] pelo ...any chance you could pm me? [04:01] edz, I sent you some info in a pm window [04:01] anyone good with gdesklets? [04:01] #ubuntu-effects [04:01] ziggy: (I assume you mean Beryl) [04:01] Pelo, sorry, is just that i never heard about it untill now and it seems a good alternative to using CD which i dont have, i dont bother anymore. [04:01] yes [04:01] I'm running 2 pcs and trying to keep up LOL [04:01] mherzomgtg: you can install it from the command line [04:01] ziggy: /join #ubuntu-effects [04:01] Snipe, join me in #pelo [04:01] !info sun-java5-jre [04:01] sun-java5-jre: Sun Java(TM) Runtime Environment (JRE) 5.0 (architecture independent files). In component multiverse, is optional. Version 1.5.0-11-1ubuntu2 (feisty), package size 7287 kB, installed size 16168 kB [04:01] /join #ubuntu-effects [04:01] !install > Excalibas check for a private message windows with instructions from ubotu [04:01] taime1: if you mean from nvidia web site? there are two version.. one legacy driver and one for new cards which is 100.14.11 you probably use the legacy at the moment === Aeserai [n=aes@c-76-110-208-39.hsd1.fl.comcast.net] has joined #ubuntu [04:01] it wants me to select "nv" as the X server driver, but I read in the forums that that doesn't work [04:01] mherzogmtg: you don't need the binary, feisty comes with java. sudo aptitude install sun-java6-jre sun-java6-plugin . That will get you runtime and the firefox plugin [04:02] taime1: the legacy begin 1.0-96xx or similar === Dirrtys [n=dirrty@c-67-173-160-185.hsd1.il.comcast.net] has left #ubuntu ["Konversation] === dirtblac1 [n=dana@ip68-231-94-48.ph.ph.cox.net] has left #ubuntu [] === J4fun [n=JB@adsl-68-126-189-222.dsl.pltn13.pacbell.net] has joined #ubuntu [04:02] daprie, try vesa then [04:02] thanks === Rprp [n=Rprp@cc763024-b.groni1.gr.home.nl] has joined #ubuntu [04:02] anyone have any ideas? [04:02] Snipe, join me in #pelo if you want some private tutoring [04:03] wolfsong, the only time I see that is when I don't have a window manager running; can you drag them around with your mouse? [04:03] thank you === banyunet [n=banyunet@202.149.84.134] has joined #ubuntu === Captain_Inferno8 [n=Bushsuck@adsl-074-166-214-206.sip.bct.bellsouth.net] has joined #ubuntu [04:04] i dont think im using the legacy driver [04:04] nickrud: it happens when gnome starts [04:04] choyou [04:04] I don't have one running now === darwin81 [n=julio@226.138.189.72.cfl.res.rr.com] has joined #ubuntu [04:04] wolfsong: but can you drag the window around with the mouse? === bruenig [n=bruenig@ip-129-15-131-246.fescfwsm.ou.edu] has joined #ubuntu === fale [n=fale@c-67-169-168-198.hsd1.ca.comcast.net] has joined #ubuntu === a-atwood [n=alan@dialport51.west.eskimo.net] has joined #ubuntu [04:04] taime1: if you have it running now use: gksu nvidia-settings to get to the control pannel [04:04] hello === yigal [n=yigal@pool-71-118-39-68.lsanca.dsl-w.verizon.net] has joined #ubuntu [04:04] thanks fellers [04:05] nickrud: nope === terrestre [n=ircap@254-7-246-201.adsl.terra.cl] has joined #ubuntu [04:05] does anyone know how to use gnuplot? [04:05] be back later if it doesn't work === daprie [n=daprie@72.166.167.86] has left #ubuntu [] [04:05] compiz is giving lots of gtk-window-decorator warnings [04:05] How can I change who gets access and right to modify a certain volume? [04:05] what is the birthate of a high quality ogg vorbis? === J4fun [n=JB@adsl-68-126-189-222.dsl.pltn13.pacbell.net] has joined #ubuntu === intrpngn [n=cmeister@pool-72-69-236-55.mdsnwi.dsl-w.verizon.net] has joined #ubuntu [04:05] wolfsong: disable the show/hide buttons? === bigcx2 [n=bigcx2@c-71-61-185-75.hsd1.wv.comcast.net] has joined #ubuntu === Sevarus [i=chatzill@nat/ibm/x-bca940d49786faf8] has joined #ubuntu [04:06] Frogzoo: how? [04:06] wolfsong: ok, probably no window manager. And, I know little about compiz-whatever; you should try asking on #ubuntu-effects or #compiz-fusion === TheAnon [n=danny@adsl-76-217-70-29.dsl.chcgil.sbcglobal.net] has joined #ubuntu === vbabiy-Laptop [n=vbabiy@pool-71-244-118-150.albyny.fios.verizon.net] has joined #ubuntu [04:06] wolfsong: why don't you go to #ubuntu-effects ? [04:06] wolfsong: right click - properties [04:06] fale: the same as mp3 [04:07] From what I can tell, when I start beryl, I'm supposed to have a little red diamond in the system tray? I don't see it. I have the beryl settings manager open. Can anyone tell me what I'm missing? [04:07] darwin81: ordinarily only root can change volume rights, you might want to take a look at acls, or just create a group to manage the volume [04:07] yigal: 256? [04:07] fale: thats high but if you want it that high, ok === tego [n=tego@217.54.64.2] has joined #ubuntu [04:07] fale: what do you want it for :) === nickrud thinks that high quality ogg's don't get born often enough, sadly [04:08] Zemus: do you have anything in the tray? network manager or updatemanager? === evillord is now known as giggety [04:08] yigal: I want have a very good quality of American Idiot [04:08] fale: 100 is enough [04:08] serenityUK, sure, I have the network manager, xchat, pidgin, sound, and time. [04:08] yigal: ok, thx 1000 === user1 [n=user1@222.124.207.110] has joined #ubuntu [04:08] fale: if it's already mp3, nothing you can do will improve quality [04:08] Frogzoo, Let a explain my situation. I have Ubuntu installed on a 15GB Hard Drive. I have a 160GB Hard Drive I want to mount as my home folder, but only root can access it and make folders and files in it. === jaime [n=jaime@c-71-59-3-197.hsd1.ga.comcast.net] has joined #ubuntu [04:09] fale: come on, thats going to be huge, but if you insist [04:09] Frogzoo: no, I have the origina CD === Crusher [n=You@ppp121-45-48-215.lns11.adl2.internode.on.net] has joined #ubuntu === seraph [n=aerie@60.52.202.170] has joined #ubuntu [04:09] serenityUK, ...? [04:09] I'll try that nickrud, yigal, Frogzoo [04:09] I have downloaded totem player, but i cant play avi files, I know i need the codecs, but where do I get them? === neur1 [n=neuro@udp094183uds.hawaiiantel.net] has joined #ubuntu [04:09] darwin81: ok, just mount the disk at /home === seraph [n=aerie@60.52.202.170] has left #ubuntu [] === DrOnline [n=bofh@twinpenguins.carleton.ca] has joined #ubuntu [04:09] jaime, it should give you a window offering to get them for you [04:09] wolfsong: luck, I'd run it if I didn't have this crappy ati [04:09] does anyone know how to use gnuplot? [04:09] Zemus: possibly you launched the settings instead of manager? close the window and type beryl-manager [04:09] it doesn't for some reason [04:09] jaime, you should be able to access the terminal and type "sudo apt-get install wm32codecs" [04:10] !codecs | jaime [04:10] jaime: For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats [04:10] HI all of sudden I cannot connect to my router as well at my college any help [04:10] Zemus: i use compiz-fusion now it's all from memory [04:10] serenityUK, ok, thanks. Do you know where I would access it from the application launcher? [04:10] is it wm32codecs [04:10] serenityUK, cool, thanks [04:10] krammer: have you done a ping test? [04:10] yigal: gnuplot is extensively documented [04:10] or win32codecs? [04:10] Zemus, it is w32codecs, it isn't in the main repos, they are doubtfully even needed for his avi, I can't think of an avi combination that needs them === neur1 [n=neuro@udp094183uds.hawaiiantel.net] has left #ubuntu [] [04:10] please help [04:10] Zemus, can also type beryl --replace i think === seraph [n=aerie@60.52.202.170] has joined #ubuntu === moreme [n=users1@203.177.75.120] has joined #ubuntu === thansen|laptop [n=thansen@19.243.sfcn.org] has joined #ubuntu [04:10] hi all [04:10] jaime: check out the link bruenig gave you, there's a step in there yet [04:10] Frogzoo: yes, but trying to real time rotate a multiplot is not, and is rather challenging [04:10] serenityUK, Zemus there is also the CompizFusion systray icon now. [04:10] does ubuntu 7.04 desktop edition come with a minimal install option? or does it just install the whole shebang regardless? [04:11] seraph, if you want minimal install the server edition then pick what you want to install [04:11] seraph: the live cd? the whole shebang [04:11] seraph, i think the alternate install CD is lighter [04:11] seraph, number 2 [04:11] seraph: It just installs the whole shebang. Get the alternate CD if you want choices [04:11] Frogzoo: it, only rotates the last graph, and forces, reishuing the gnuplot commands to redraw the total plot, I would prefer not to have to do this [04:11] ok thanks [04:11] Zemus: you have to set beryl-manager to run at startup if that command works for you add it to System->Prefs->Sessions startup programs [04:11] !minimal | seraph [04:11] seraph: The Minimal CD image is very small in size, and it downloads most packages from the Internet during installation, allowing you to select only those you want (the installer is like the one on the !Alternate CD). See https://help.ubuntu.com/community/Installation/MinimalCD [04:11] the alternate cd is not lighter if you just go default [04:11] yeah alternate cd works as well, sorry :) [04:11] but u can choose more options correct bruenig ? [04:12] macd: yes is saw there was competition for the new logo [04:12] for some reason it says beryl-manager isn't installed. How odd. [04:12] i have error in update it say i must run apt_get [04:12] Zemus: why aren't you using #ubuntu-effects? [04:12] macd, is server edition okay to use for regular desktop use? [04:12] how do you get compizconfig-settings-manager installed on feisty??? [04:12] tego, sudo apt-get install -f [04:12] tego, What is the exact error? [04:12] is it not in the repos? [04:12] Evanlec, you might have to isntall the -generic kernel, other than that I dont see a problem [04:12] Evanlec: You should probably switch to the desktop kernel (actually, you should probably just install the desktop edition from the get go) [04:12] im getting 64 bytes from the ping === Nighthawk420 [n=nighthaw@74-138-185-56.dhcp.insightbb.com] has left #ubuntu [] [04:13] randy026: no. Instructions in #compiz-fusion or #ubuntu-effects === emile [n=emile@cp665411-a.dbsch1.nb.home.nl] has joined #ubuntu [04:13] whats the difference between the generic kernel and the server? === KCB_ [n=kcb@66-230-88-165-dial-as2.nwc.acsalaska.net] has joined #ubuntu [04:13] randy026: no it's in the gutsy repro in october feisty you need a 3rd party [04:13] Nickrud yeah I know I am on gutsy [04:13] i was wondering because i thot server edition might have RAID support built-in [04:13] I am trying to help someone on feisty [04:13] Evanlec: server kernel has some tweaks for kernels. Some HW compatability removed, and things like PREEMPT disabled. [04:13] randy026: it's there then. [04:13] but installing the server edition, then just install say gdm/kdm/xdm makes for a lighter install than the standard livecd or either [04:13] Evanlec, Most prominent is that server can use 4+ GIG even in 32 bit [04:13] I know! === tdyer [n=tdyer@Torch.cs.Dal.Ca] has joined #ubuntu [04:13] Evanlec, RAM that is [04:14] right... [04:14] yigal, yeah, I didn't know about the channel, thanks though [04:14] is adept the new version of the older synaptic package manager? [04:14] does it have any hardware raid support? [04:14] lol, sorry randy026 . But no backports for feisty, I guess [04:14] Evanlec, of course === seraph [n=aerie@60.52.202.170] has left #ubuntu [] [04:14] macd, you don't need a login manager, those are the more needless of the bloat [04:14] oh? so it might work better with my hardware "soft-raid" motherboard ? [04:14] jaime: no, it's a thing made for and by kde [04:14] thanks === cs_ [n=cs@87.109.19.211] has joined #ubuntu [04:14] bruenig, yeah I really meant to type gnome/kde/xfce [04:14] Evanlec, Do you know the difference between Real hardware RIAD and soft-raid ? [04:15] Yigal: are you still here? [04:15] Jordan_U, yes [04:15] is it as good as synaptic nickrud? [04:15] krammer: sure [04:15] im getting 64 bytes from the ping test [04:15] krammer: how about you? [04:15] jaime: just an alternate. Nothings better than synaptic, it's got aptitude ;) === Talaman72 [n=sparkly@66-215-57-61.dhcp.gvrb.ca.charter.com] has joined #ubuntu [04:15] Jordan_U, I have onboard raid support via bios, but i know that it isnt real hardware raid === Zorak [n=ajmiller@75.108.239.94] has joined #ubuntu [04:15] Evanlec, The latter is not supported nearly as well in Linux [04:15] krammer: how fast? === zippytech [n=zippytec@71.155.129.242] has joined #ubuntu [04:15] 1,32 ns' [04:15] ms [04:15] Evanlec, if its in the bios chances are it is not softraiod === sl4dd3r [n=sl4dd3r@201.141.13.55] has joined #ubuntu [04:16] Karti: you have a very nice service, what are you using? [04:16] i installed ubuntu and installed the firewall [04:16] Its prolly your run of the mill Si3152 or something === tdyer [n=tdyer@Torch.cs.Dal.Ca] has left #ubuntu [] === manikfox [n=manikfox@d226-26-220.home.cgocable.net] has joined #ubuntu === jzero88 [n=jzero88@adsl-69-108-65-104.dsl.irvnca.pacbell.net] has joined #ubuntu [04:16] how do i reconfigure it [04:16] macd, I've tried to explain this to many people, hang on === kishan [n=kishan@CPE000c41b08927-CM001ac31584b4.cpe.net.cable.rogers.com] has joined #ubuntu [04:16] how do i show my processes? [04:16] Evanlec, You may be able to get it to work but a pure software RAID might be easier [04:16] jaime: but go ahead and try it, if you end up preferring it, it's better === zyth_ [n=zyth@wnpgmb06dc1-0-52.dynamic.mts.net] has joined #Ubuntu [04:16] Evanlec, dont worry about it, its not that big of a deal really [04:16] yea, macd, its actually the intel software raid controller [04:16] zippytech, the firewall is installed by default, what do you mean you installed it [04:16] krammer: you have a very nice service what are you using? === sl4dd3r [n=sl4dd3r@201.141.13.55] has left #ubuntu ["Leaving"] [04:16] Karti: sorry, automatic name completion [04:16] what is the command to show procceses? [04:16] Evanlec, ahh I am familiar with that one, that raid is still transparent to the OS I believe [04:16] ok there was an option to allow http ssh [04:16] what do you mean? === zyth_ is now known as zyth [04:16] Jordan_U, if i didnt have windows installed i would gladly do a pure software raid === chris_ [n=chris@82-41-27-36.cable.ubr04.edin.blueyonder.co.uk] has joined #ubuntu [04:17] now i need to add msql [04:17] zippytech: http ssh? [04:17] krammer: you are communicating at a very high speed [04:17] jzero88: top or htop [04:17] tanks [04:17] new protocol? [04:17] comcast, im using a router [04:17] bruenig: firewall, that was a list of stuff. [04:17] port 3306 [04:17] krammer 64bytes at 1ns - wow === mauro [n=usuario@host21.200-45-187.telecom.net.ar] has joined #ubuntu [04:17] yigal: what did you ping ? [04:17] jzero88: you can also use top -u username [04:17] macd, all i know is ubuntu doesnt see the array correctly unless i install dmraid package, and even then its a PITA === ray_ [n=ray@c-69-247-76-112.hsd1.nm.comcast.net] has joined #ubuntu [04:17] krammer: what did you ping? [04:17] yes [04:17] but i cannot find a config [04:17] i've just about given up on it [04:17] Evanlec, makes total sense [04:17] Evanlec: have you tried the alternate CD [04:18] Evanlec, The LiveCD has absolutely no support for RAID [04:18] Flannel, no... === m0u5e [n=denniska@c-24-6-100-103.hsd1.ca.comcast.net] has joined #ubuntu [04:18] static ip [04:18] zippytech: a config? you mean, what to install? === sampan [n=bamboo@ppp-71-139-48-219.dsl.snfc21.pacbell.net] has joined #ubuntu [04:18] You should use the server/alternate cd [04:18] Flannel, the alt cd have more raid options? [04:18] Evanlec: yes [04:18] krammer: I want you to try and ping google, "ping www.google.com" and tell me the results [04:18] Evanlec, The alternate *HAS* Raid options :) [04:18] www. is redundant [04:18] thats exciting! [04:18] lol [04:18] zippytech: install mysql-admin and mysql-browser, they are nice graphical frontends to mysql === quasar88 [n=quasar88@pool-70-18-2-184.nycmny.east.verizon.net] has joined #ubuntu [04:19] so maybe i wont have to break my raid array after all [04:19] Hello ALL [04:19] i setup the unbuntu firewall on install now i need to mod the config to allow mysql 3306 port but i cannot find any firewall config files [04:19] its raid 0 btw [04:19] nothing yet [04:19] not real raid [04:19] zippytech, man iptables [04:19] what's the command to get the ubuntu version ? [04:19] unknown host [04:19] zippytech: ah. install firestarter, and use that front end to manipulate your firewalls [04:19] Evanlec, The liveCD is for new users and hardware testing, IMHO the 'alternate' install CD is the real install CD [04:19] welcome quasar88 === Zemus [n=Yeti@unaffiliated/zemus] has joined #ubuntu [04:19] cannot see where there are any rules but the ports are blocked [04:19] krammer: how are you on irc at #ubuntu? === jane_ [n=chatzill@chello213047232241.tirol.surfer.at] has joined #ubuntu [04:20] dekstop [04:20] !version [04:20] To find out what version of Ubuntu you have, type lsb_release -a in a !shell [04:20] Pelo: uname [04:20] this is for my laptop [04:20] Has anyone used google earth w/ubuntu [04:20] Jordan_U, no kidding, well i have a 64-bit alternate install CD cuz the 64 Live CD would just hang === aandress [n=andress@lak-73-33.wohnheime.ruhr-uni-bochum.de] has joined #ubuntu [04:20] krammer: so you are only having problems with a wifi problem? [04:20] yes [04:20] serenityUK, no that is the kernel, I need to know the release [04:20] Jordan_U, but i havent tried it [04:20] Evanlec, keep in mind 64bit has issues with proprietary gfx drivers and flash === Coole^ [n=justin@71-212-52-231.tukw.qwest.net] has joined #ubuntu === zyth [n=zyth@wnpgmb06dc1-0-52.dynamic.mts.net] has joined #Ubuntu [04:20] krammer: you can ping the schools router at 1ns 64bytes etc.? [04:21] zippytech: probably you have to tell mysql to listen to outside ports; the config is in /etc/mysql/my.conf, [04:21] krammer: with the wifi? [04:21] macd, i think 64-bit had issues with opensource ati drivers on my machine, video detection was very clunky [04:21] s/schools/school's [04:21] ok thanks i will check [04:21] pelo sorry i thought you meant 32 or 64bit [04:21] i forget if it was 64 a friend tried to connect [04:21] Pelo: lsb_release -a === taggie [n=taggie@c-68-61-100-197.hsd1.mi.comcast.net] has joined #ubuntu === emile [n=emile@cp665411-a.dbsch1.nb.home.nl] has joined #ubuntu [04:21] nickrud, thanks [04:21] Evanlec, Im not even totally sure if ATI has 64bit drivers, I know NVIDIA does, but neigther are prepackaged via ubuntu [04:21] ubotu said that a minute ago [04:21] Evanlec, The open source ati drivers work great with 64 bit in my experience === mitchbones [i=Mitch@24.182.210.187] has joined #ubuntu [04:22] but advised me to install kde but Id rather rectify this problem first [04:22] Evanlec, It's the binary blobs that are the problem [04:22] heh. fast channel, I don't even try to read every line anymore [04:22] Jordan_U, the 64-bit livecd wouldnt boot unless i went into safe graphics mode === [1] Netham45 [n=netham@c-67-190-103-57.hsd1.co.comcast.net] has joined #ubuntu [04:22] but the 32-bit boots great with full resolution === Chascon [n=chatzill@pc-110-100-83-200.cm.vtr.net] has joined #ubuntu === effie_jayx [n=valles@ubuntu/member/effie-jayx] has joined #ubuntu [04:22] krammer: if you can ping the router with the laptop quickly, and you can then it sounds to me either 1. a firewall on the laptop or 2. you no longer have the right essid and/or password. [04:22] i dont understand why they would have different opensource ati drivers [04:22] Evanlec, 64 bit is really not for the desktop atm === m11 [n=m1r0@83-131-202-101.adsl.net.t-com.hr] has joined #ubuntu === fender [n=fender@mail.dropletsap.com] has joined #ubuntu [04:23] morning all === stalker145 [n=stalker1@cpe-075-191-220-176.ec.res.rr.com] has joined #ubuntu [04:23] macd, im starting to realize that, and its a shame [04:23] no password needed [04:23] m11: good evening :) === lymeca [i=lymeca@unaffiliated/lymeca] has joined #ubuntu [04:23] Evanlec, They don't really, I don't think there is much assembly in the open source drivers [04:23] :) === evri2 [n=evri2@85.108.108.140] has joined #ubuntu [04:23] Evanlec, the performance differences are negligable (then again were getting offtopic now) [04:23] i am pinging the broadcast [04:24] Has anyone used google earth w/ubuntu ?? [04:24] krammer: are you sure, if you can use internet/irc with the desktop then there has to be something stopping the connection, but your wifi is obviously working perfectly. So there seems only 2 possibilities. [04:24] macd, yea, on paper the performance difference should be large, but with current software its not [04:25] sweet that worked thanks!!! [04:25] !googleearth | quasar88 [04:25] quasar88: Google Earth is now available, for free (only as in price), for Linux, too. To download it see http://earth.google.com/download-earth.html - A package for Ubuntu is available in the !Medibuntu repository [04:25] i am having problem with creating ssl with apache2 on ubuntu, can someone help ? === sea [n=daniel@196.3.198.30] has joined #ubuntu [04:25] !tab | zippytech ;) [04:25] zippytech ;): You can use for autocompletion of nicknames in IRC, as well as for completion of filenames and programs on the command line. === chris__ [n=chris@82-41-27-36.cable.ubr04.edin.blueyonder.co.uk] has joined #ubuntu [04:25] yes i configured the router for vnc and disabled the firewall\ [04:25] m11: What are you having trouble with? === no_gatez_fan is now known as moonie === spek [i=memOrial@87.243.74.33] has joined #ubuntu [04:25] krammer: what port are you connecting to the router on? [04:25] is there a channel specific to audio problems? [04:25] flannel , i try issue this command but ubuntu dont accept it : sudo make-ssl-cert /usr/share/ssl-cert/ssleay.cnf /etc/apache2/ssl/apache.pem [04:25] 5900 === kritical [n=kritical@kritical.wxnz.net] has joined #ubuntu [04:26] taggie: this is it, such as it is for that === d4ft [n=d4ft@24-241-6-113.dhcp.buft.sc.charter.com] has joined #ubuntu [04:26] ubotu How do I get to the Medibuntu repository ? [04:26] flannel , it gives output : make-ssl-cert: command not found === zyth [n=zyth@wnpgmb06dc1-0-52.dynamic.mts.net] has joined #Ubuntu [04:26] krammer: have you used it for another wireless setup before? [04:26] flannel , i am sure i installed libapache-mod-ssl [04:27] yes [04:27] flannel ; libapache-mod-ssl is already the newest version [04:27] nickrud, thx. I did the daring thing, and upgraded from a perfectly stable feisty to gutsy, and ever since i've had no audio (thinkpad t60p, intel HDA) unless i plug in a USB sound adapter. I haven't been able to find any indication why it doesn't work. [04:27] m11: what version of ubuntu is this? === spek is anyone from russia? [04:27] 7.04 [04:27] !ru | spek [04:27] spek: #ubuntu-ru / Pozhalujsta vojdite v #ubuntu-ru dlq pomoshchi na russkom qzyke [04:27] Jordan_U, is it possible and/or faster to burn linux ISO's to DVD rather than CD? [04:27] it was even hard to connect to books of a million it took me almost an hour to connect [04:27] !ru [04:27] nickrud, daring meaning "dumb" :) [04:27] ! [04:27] ok [04:27] flannel , ubuntu 7.04 server , updated and upgraded to latest === evri2 [n=evri2@85.108.108.140] has joined #ubuntu [04:27] Sorry but I have been ruined by *win and am trying to find my way in the new world [04:27] krammer: all ports are open, on both the router and laptop, and you are sure of this. [04:28] krammer: s/./? [04:28] Evanlec, It's possible but I don't know about faster, if you are only going to install once go with the minimal CD since it grabs almost everything from the net as you install [04:28] krammer, try setting urself as dmz just to be 100% sure ;p [04:28] how do I do this? [04:29] im still trying to install the codecs for totem and it says I have to do it through the package manager [04:29] Jordan_U, but isnt that slower than having the data on the disc? === edz [n=ed@adsl-69-151-200-102.dsl.hstntx.swbell.net] has joined #ubuntu [04:29] im trying to add a source [04:29] for third party [04:29] do i just put in the website address? [04:29] Jordan_U, I'm speaking of DVD's generally faster read speeds because of higher data density === Zemus [n=Yeti@unaffiliated/zemus] has joined #ubuntu [04:29] Evanlec, Only if you already have the iso already downloaded [04:29] altho then again they dont spin as fast [04:29] i just installed my ati drivers on ubuntu 7.4 and now my screen seems to be over lapping its windows and not showing all the information that should be on the screen === shiznix [i=legends@ppp121-45-38-179.lns10.adl2.internode.on.net] has joined #ubuntu === linescanner [n=cutter@81-86-244-201.dsl.pipex.com] has joined #ubuntu [04:30] taggie: I did the same, and I think I may even have the same chip: for me, adding options snd-hda-intel model=3stack made it work. There are various models, I think you can find the options on alsa-project.org [04:30] apologies to all but I seem to be in the wrong place for absolute nubees [04:30] edz , dpkg-reconfigure xserver-xorg to fix resolution [04:30] m11: make-ssl-cert is in the 'ssl-cert' package. libapache-mod-ssl is for apache1, apache2 already includes the ssl module [04:30] krammer: are you using firestarter for your firewall? [04:30] taggie: to a file in /etc/modprobe.d/ [04:30] Evanlec, Unless you have a faster connection then I have ever seen, or the slowest CD drive, your bottleneck is downloading not reading / writing to CD [04:30] true [04:30] which is why im downloading the full iso [04:31] ty flannel , i will check [04:31] Evanlec, So if you can download and install at the same time you save time [04:31] i just started the program [04:31] can anyone suggest a place where I can chat with complete dummies like me ? === thejoe [n=joseph@c-69-251-236-45.hsd1.md.comcast.net] has joined #ubuntu [04:31] Evanlec, Unless you want to install on more than one machine [04:31] well, i understand, but i will be installing this more than once [04:31] Evanlec, ;) [04:31] no [04:31] new vid card comes tomorrow i probably re-install then ;p === edman007 [n=edman007@ool-44c28ff1.dyn.optonline.net] has joined #ubuntu [04:31] Evanlec, Why? [04:32] Jordan_U, just to be safe? its nvidia and i have ati === zabin [n=zabin@130-127-46-3.mccabe.resnet.clemson.edu] has joined #ubuntu [04:32] hey [04:32] nickrud, i don't see any reference to snd-hda-intel in my modprobe dir at all, maybe that's my issue. [04:32] flannel, many thanks m8 :) [04:32] krammer: I have had problems before with firestarter. It will say that I have killed it and it is off but it is still working, this is funny but try removing it for a little while - if you can without worry too much about security [04:32] hello, just installed ubuntu & everything works. however, the screen appears "stretched"....any suggestions? i am running a radeon 9500 [04:32] m11: No problem [04:32] !medibuntu | quasar88: no, you probably just got lost in the chatter. [04:32] quasar88: no, you probably just got lost in the chatter.: medibuntu is a repository of packages that cannot be included into the Ubuntu distribution for legal reasons - See http://www.medibuntu.org [04:32] where are the wireless network keys and wireless networks that i have connected to saved? === Tidus [n=dontneed@12-208-24-169.client.mchsi.com] has joined #ubuntu [04:32] thejoe, http://distrowatch.com/weekly.php?issue=20070903#feature [04:32] there is a file the network manager uses to keep track of that does anyone know where that is? [04:32] Evanlec, Not a problem, just install the nvidia drivers, if you had a hotpluggable card you could do it without even rebooting :) === zyth [n=zyth@wnpgmb06dc1-0-52.dynamic.mts.net] has joined #Ubuntu === h1st0 [n=histo@h156.112.29.71.ip.alltel.net] has joined #ubuntu [04:32] uninstall ? === Ultraface [n=charles@89.204.196.144] has joined #ubuntu === yookoala [n=Koala_Ye@061092028037.ctinets.com] has joined #ubuntu [04:33] taggie: when the kernel went from 15 to 16, I ended up copying the kernel module over to keep sound. Whatever works, I always say [04:33] Jordan_U, really? it wont affect the kernel or anything? what about xorg? [04:33] hello === trevor_ [n=trevor@cpe-75-85-75-246.socal.res.rr.com] has joined #ubuntu === stalker145 [n=stalker1@cpe-075-191-220-176.ec.res.rr.com] has joined #ubuntu === booster_ [n=booster@frtc-fib-dsl-450200.mis.net] has joined #ubuntu [04:33] nuckrud, any way to reload that without reboot? [04:33] Evanlec, Nope, install driver, reconfigure xorg.conf, restart X and you are done [04:33] Jordan_U, i was under the impression that when u changed hardware u had to recompile kernel or reinstall [04:33] I'm installing vsftpd by compilation. But there is some prob. Can anyone here help? [04:34] how can I remove firestarter? [04:34] just modprobe snd-hda-intel === bpds [n=brian@71-81-220-30.dhcp.stls.mo.charter.com] has joined #ubuntu [04:34] taggie: modprobe -r first, to remove it [04:34] taggie: and hope nothing else is holding it [04:34] THX , niters w/ peace & blessings [04:34] Jordan_U, but since this is a vid card that is not so? === hedch [n=hedch@S010600e029837be0.ca.shawcable.net] has joined #ubuntu [04:35] yookoala: Why you compiling it? === isabella__ [n=isabella@pool-72-75-17-134.washdc.east.verizon.net] has joined #ubuntu [04:35] nickrud: not so lucky, looks like reboot time. if I don't catch you later, thanks for the assist, #ubuntu scores again. === Ultraface [n=charles@89.204.196.144] has left #ubuntu ["Fais] [04:35] hello everyone.....can anyone in here tell me if beryl needs a higher graphics card to run??? [04:35] Evanlec, *NIX is very modular, I have taken a full install on one machine, swapped the HD to another completely different one and after reconfiguring X everything else just worked ( almost everything is configured at boot ) [04:35] taggie: hope it works, and don't forget the different model options [04:35] yep, i'll try those next [04:35] Jordan_U, no kidding, that is encouraging! === spek [i=memOrial@87.243.74.33] has left #ubuntu [] === heywood [n=jeremy@c-67-169-221-204.hsd1.or.comcast.net] has joined #ubuntu === [1] Netham45 is now known as Netham45 === meereye [n=shane@adsl-69-221-143-187.dsl.akrnoh.ameritech.net] has joined #ubuntu === stark [n=stark@dhcp16062.dorman.fsu.edu] has joined #ubuntu [04:36] Does anyone know where wireless network keys are stored? [04:36] zabin: yeah.... they're encrypted === fall-en [n=raven@bas16-toronto12-1088898862.dsl.bell.ca] has joined #ubuntu === Prognatus_ [n=irc@147.80-202-51.nextgentel.com] has joined #ubuntu === stiev3 [n=steve@ip24-253-156-128.hr.hr.cox.net] has joined #ubuntu === stalker145 [n=stalker1@cpe-075-191-220-176.ec.res.rr.com] has left #ubuntu ["Ex-Chat"] [04:36] zabin: they live inside the gnome-keyring-daemon [04:36] booster_: i used to run beryl on a geforce3 a while ago [04:37] booster_, i believe as long as your vid card has 3d support and isn't REALLY old its no problem === spek [i=memOrial@87.243.74.33] has joined #ubuntu === rjs [n=rjs@c-69-243-138-228.hsd1.in.comcast.net] has joined #ubuntu [04:37] I think they also live in /etc/network/interfaces for things not configured using network-manager === spek [i=memOrial@87.243.74.33] has left #ubuntu [] === andresmujica [n=andresmu@190.25.96.244] has joined #ubuntu [04:37] zabin: get the gnome-keyring-manager and you can view the keys managed by it [04:38] flannel , used that command again but it didnt create "apache.pem" in /etc/apache2/ssl/, nor did it create /ssl folder === manikfox [n=manikfox@d226-26-220.home.cgocable.net] has joined #ubuntu === rjs is now known as rjs2 [04:38] zabin: it's ~/.gnome2/keyrings , but you need gnome-key .. oh [04:38] hi! anyone can watch this videos?? http://www.pokerstars.tv/wcp/es/ i want to watch it but it doesn't work... [04:38] Jordan_U, to reconfigure X u talking about the dpkg-reconfigure xorg command? [04:38] Evanlec, Yes === DenysLins [n=denys@189.13.234.224] has left #ubuntu [] [04:39] i set up my router and i added the wireless network and changed so many things on it my linux machine is not able to connect to it now [04:39] Hi everyone, I installed Ubuntu on a seperate, external USB hard drive and had GRUB install to the hard drive as well. I had it set up so that if the hard drive was plugged in, it would be higher in the boot order than my regular drive, and so would give me my regular GRUB boot menu. If it wasn't plugged in, it would boot straight to Vista. This worked for a while, but for some reason, on my last reboot, Vista was gone from the boot options in [04:39] GRUB, and when I tried to restart I got a error along the lines of "No BOOTMGR found, reboot". Any ideas? [04:39] Evanlec, Add -phigh and it only asks for the driver and resolutions [04:39] so i just run thru that, select opensource nvidia driver and then go and download binary once GUI works? [04:39] i think that i just have to clear out that file to fix the problem. === jundie [n=jundie@58.71.34.138] has joined #ubuntu [04:39] m11: https://help.ubuntu.com/7.04/server/C/httpd.html#https-configuration might help === escuser [n=josue@201.229.140.222] has joined #ubuntu [04:39] Evanlec, Yup, or install the nvidia driver with apt-get before starting X === manikfox [n=manikfox@d226-26-220.home.cgocable.net] has joined #ubuntu [04:40] ty flannel i check === meereye [n=shane@adsl-69-221-143-187.dsl.akrnoh.ameritech.net] has joined #ubuntu [04:40] Any other ideas with this wifi problem? [04:40] Jordan_U, but installing one from the repo is better than installing latest binary? [04:40] stark: did you install a kernel recently? === jplove71 [n=jplove@c-24-118-247-51.hsd1.mn.comcast.net] has joined #ubuntu === survivor3 [n=everaldo@189.12.16.108] has joined #ubuntu [04:40] I don't think so [04:41] nickrud: My GRUB menu hasn't changed in a while (in terms of automatically adding new kernels to the list) [04:41] andresmujica: that is an .asf file from microsoft.. i don't know if they work in linux.. you can find that program on bittorrent though [04:41] does ubuntu run on macs? === Zorak [n=ajmiller@75.108.239.94] has joined #ubuntu [04:41] hello, is an intel duo core notebook a 64bit system? [04:41] nickrud: I only just ran into this problem tonight... kinda scared the hell out of me, to be honest, :O [04:41] Evanlec, Better is subjective, the nice thing about the one in the repos is that it won't break when you upgrade the kernel ( apt grabs new drivers when it grabs a new kernel ) === malocite [n=malocite@206-248-190-87.dsl.teksavvy.com] has joined #ubuntu [04:41] andresmujica: programme* i mean tv not software [04:41] ari_stress: it can be [04:42] stark, update-grub will add ur extra kernels [04:42] stark: a new kernel was release 29th last month, you probably did [04:42] willdev: yes [04:42] I am having a problem connecting to a wireless network it finds it but does not connect to it any ideas how to fix this? [04:42] can it dual boot [04:42] stark: and it runs update-grub, which will mess you up sometimes. === meereye [n=shane@adsl-69-221-143-187.dsl.akrnoh.ameritech.net] has joined #ubuntu [04:42] will it run on my new macbook? [04:42] nickrud: I might have done it on the 29th, then, but I'm pretty sure Vista's worked more recently than then [04:42] /list [04:42] Flannel: how do i test it? will running a 64bit live cd prove it? === giggety is now known as EvilLord [04:42] willdev, Yes [04:42] stark: neither boots? [04:43] nickrud: Still, it totally jacked up a completely seperate hard drive [04:43] stark: yes === fiveiron [n=fiveiron@74-137-162-129.dhcp.insightbb.com] has joined #ubuntu [04:43] ari_stress: Yep [04:43] is it easy? [04:43] willdev, wiki.ubuntu.com/MacBook === nesl247 [n=nesl247@archlinux/trusteduser/nesl247] has joined #ubuntu [04:43] thanks Flannel [04:43] hmm- i thought that it would work with restricted codecs... :( [04:43] ooo ok thanks :D [04:43] nickrud: No, Ubuntu boots fine, and I can see the internal hard drive from Ubuntu, I just can't boot to it [04:43] zabin: are the AP yours? [04:43] Anyone here familiar with ubuntu's cups patches? [04:43] !games [04:43] Information about games on Ubuntu can be found at https://help.ubuntu.com/community/Games and http://www.icculus.org/lgfaq/gamelist.php [04:43] Jordan_U, on another topic, is upgrading the kernel a good idea to do on ubuntu? or better to just wait for new distro release ? === amidaniel [n=amidanie@wikipedia/AmiDaniel] has joined #ubuntu [04:43] yes [04:43] bulmer: yes [04:43] stark: there are disks out there that will rewrite the vista mbr, that's what you'll have to do. [04:44] Hi look I'm having some issues with vim-full on one of my two servers. They are exactly the same, server2 installed vim-full fine, but server1 says: http://rafb.net/p/2J76tO83.html [04:44] zabin: how is the signal strength like? === EvilLord is now known as giggety [04:44] nickrud: Darn, I was hoping to be able to avoid that === nesl247 [n=nesl247@archlinux/trusteduser/nesl247] has left #ubuntu ["Ex-Chat"] [04:44] bulmer: im right next to it. [04:44] nickrud: I couldn't even manually boot into Vista, though, with any sort of root, chainloader, makeactive, boot thing [04:44] stark: and there's gotta be an option to tell update-grub to not write an mbr. [04:44] Evanlec, Depends on how much work you want to do and weather the features of a newer kernel are important enough to you [04:44] zabin: is it connected? [04:44] nickrud: I'll look into it, thanks. If you happen to think of anything, I'm all ears [04:45] Evanlec: new ubuntu is in October anyway === rjs2 [n=rjs2@c-69-243-138-228.hsd1.in.comcast.net] has joined #ubuntu === tonyduke [n=tonyduke@222.68.185.74] has joined #ubuntu === TexasTwister [n=scott@adsl-67-67-220-103.dsl.austtx.swbell.net] has joined #ubuntu [04:45] stark: then you're doing what I'd do, and if it doesn't work, I'd say ask someone who knows more than I ;) [04:45] bulmer: i have another ubuntu machine that is connected to it fine. I configured the network on this computer and i have to connect to it and change the sid and then the wireless key so i think from all that connecting to the network and disconnecting to the same one making changes something got messed up [04:45] Jordan_U, i see, so its more work because u have to do it manually, vs using package manager? [04:45] serenityUK, this is true [04:45] nickrud: Ok :) [04:45] bulmer: yes the other computer is working fine on the wireless network. [04:45] Evanlec, The great thing about Linux is that the package manager keeps track of all the versions of everything you have installed and prevents conflicts, when you start doing things outside the package manager you loose some of that advantage [04:45] Jordan_U, yea, i gotcha === weazzle [n=weazzle@c-68-35-27-178.hsd1.nm.comcast.net] has joined #ubuntu === DWSR [n=doingwha@xtreme-42-120.dyn.aci.on.ca] has joined #ubuntu [04:46] zabin: and you have rebooted since you made all these changes? [04:46] can somebody help me with this wifi problem? [04:46] !o4o [04:46] Some things are inappropriate for #ubuntu-offtopic. It is asked that controversial topics: war, race, religion, politics (unless related to software licencing), gender, sexuality, drugs, questionable legal activities, removing of oneself from the planet (except by space travel) are not for here, perhaps #off-topic or ##politics. Microsoft software in ##windows (Please note Freenode Policy) - Thanks. [04:46] !grub [04:46] grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto === ozozo [n=m@63.Red-88-7-158.staticIP.rima-tde.net] has joined #ubuntu [04:46] bulmer: its trying to connect to "linksys" but that isnt a real network anywhere around its old. [04:46] hmm. [04:46] hello === DWSR [n=doingwha@xtreme-42-120.dyn.aci.on.ca] has left #ubuntu [] [04:46] bulmer: yea i restarted like 3 times === Zemus [n=Yeti@unaffiliated/zemus] has joined #ubuntu === banyunet [n=banyunet@202.149.84.134] has joined #ubuntu === Zlooot [n=foo@a213-22-32-128.cpe.netcabo.pt] has joined #ubuntu [04:47] zabin: can you configure it to lock on to your AP only? [04:47] welcome === ss [n=oranye@125.164.252.24] has joined #ubuntu === ss_ [n=oranye@125.164.252.24] has joined #ubuntu === quasar88 [n=quasar88@pool-70-18-2-184.nycmny.east.verizon.net] has joined #ubuntu === erlinux [n=evan@71-34-107-78.ptld.qwest.net] has joined #ubuntu [04:47] bulmer: how do i do that? [04:47] greetings from Galicia Spain [04:48] zabin: on your file /etc/network/interfaces you can set which essid to use [04:48] hello all, how do I determine the version of ubuntu I am using ? [04:48] bulmer: do you use network manager?' [04:48] zabin: and channel [04:48] !version | quasar88 [04:48] quasar88: To find out what version of Ubuntu you have, type lsb_release -a in a !shell === Tunix [n=tushar@open-98-006.perfigo.csus.edu] has joined #ubuntu === kaldrenon [n=68356ad9@samp.rh.rit.edu] has joined #ubuntu === winbond [n=winbond@c-68-81-29-190.hsd1.pa.comcast.net] has joined #ubuntu [04:48] zabin: on occasion, but i rely more on /etc/network/interfaces file and the /proc to find what i need === t_ [n=t@70-59-78-86.mpls.qwest.net] has joined #ubuntu === riotkittie [i=meowch@cpe-72-228-32-87.nycap.res.rr.com] has joined #ubuntu === Zlooot [n=foo@a213-22-32-128.cpe.netcabo.pt] has left #ubuntu [] === erlinux [n=evan@71-34-107-78.ptld.qwest.net] has left #ubuntu [] [04:49] can somebody help me with this wifi problem? [04:49] what wifi problem? === Jose [n=Administ@201.195.150.234] has joined #ubuntu === Tidus [n=dontneed@12-208-24-169.client.mchsi.com] has joined #ubuntu [04:49] all of a sudden i can connect to the internet [04:49] bulmer: do i want to do connect to do "connect to other wireless network" or create New wireless network? [04:50] bulmer: how come its trying to connect to a network that doesnt exist? [04:50] zabin: only connect to yours and not your neighbors :) [04:50] ohh!! PIDGIN IS SO WONDERFUL!!! [04:50] I know its mine [04:50] zabin: because the cache may have an old config .. === Digital_Pioneer [n=digitalp@adsl-69-154-61-49.dsl.ltrkar.swbell.net] has joined #ubuntu [04:51] i am but which option do i select? [04:51] zabin yours does not exist? :) === jao_ [n=jao@64.252.136.67] has joined #ubuntu [04:51] zabin: whats the name of your essid? [04:51] OK, my friend has Ubuntu Studio (Feisty) and he needs the prism54 module. How does he get it? === bikeboy [n=bikeboy@220-253-46-108.VIC.netspace.net.au] has joined #ubuntu === Pelo thinks it is wonderfull that Jose feels so confortable with the channel that he can display his lameness like that [04:51] bulmer: it does but its trying to connect to linksys but i changed the name to something else. === subpar [n=subpar@cpe-70-113-220-33.austin.res.rr.com] has joined #ubuntu [04:51] can anyone tell me if the display driver im using is the only one i can...or is there a way to upgrade the driver???? [04:51] Digital_Pioneer: its not included? === kaldrenon [n=68356ad9@samp.rh.rit.edu] has left #ubuntu [] [04:51] zabin: on your file /etc/network/interfaces you can set which wireless-essid to use [04:52] hmm i have to say [04:52] speech recognition rocks [04:52] on vista :D [04:52] hope buntu gets it sometime :D [04:52] zabin: what channel is your AP operating at? [04:52] bulmer: i want to use network-manager though. ? [04:52] m0u5e, please don'T use the enter key for punctuation [04:52] Pelo: sorry XP === Frogzoo_ [n=Frogzoo@202.155.165.25] has joined #ubuntu [04:52] riotkittie: Apparently not. Studio had a really sad installation CD, it was ncurses. I was expecting a live CD installer, but I might have missed something. Do you know a package name? [04:52] zabin: well you can, but am not familiar or can not 100% rely on that nm-manager applet [04:52] bulmer: i believe 6 im not sure though im not connected at the moment === Jack_Sparrow [n=jack@adsl-69-227-94-40.dsl.sndg02.pacbell.net] has joined #Ubuntu [04:53] m0u5e, there is speech recognition in ubuntu i beleive , check in synaptic === ultr1 [n=ultra@67-58-193-94.amtelecom.net] has joined #ubuntu [04:53] zabin: do a iwlist wlan0 scan and check which channels your card can see [04:53] hi does anybody know how to upgrade glib to 2.0? or google it? [04:53] ultr1: that's what you have with ubuntu; you trying to compile something? [04:53] ultr1, I'm pretty sure glib 2.0 is in the repos === skyfalcon866 [n=jack@c-24-218-246-100.hsd1.ma.comcast.net] has joined #ubuntu [04:54] is it safe to use gusty gibbon === Thulanis [n=jonathan@host86-153-2-251.range86-153.btcentralplus.com] has joined #ubuntu === urthmover [n=me@adsl-68-94-224-35.dsl.rcsntx.swbell.net] has joined #ubuntu [04:54] skyfalcon866, ask in #ubuntu+1 [04:54] when i use synaptic it doesnt show in search === nickrud would say no to anyone who needs to ask ;) === bichissimo [n=bichissi@189.172.30.171] has joined #ubuntu [04:54] skyfalcon866, no your computer will explode upon install!!!!?!?!?!?! === subpar [n=subpar@cpe-70-113-220-33.austin.res.rr.com] has joined #ubuntu === epiclulz [n=pizdets@pool-72-89-144-14.nycmny.fios.verizon.net] has joined #ubuntu [04:54] joebob777as7: is that true??! wow === Heady [n=heady@adsl-dyn92.91-127-33.t-com.sk] has joined #ubuntu [04:55] i am trying to compile autopackage so i can install amsn client haha [04:55] ultr1, just search for gilb , I beleive it will show as a lib ie libglib === mypapit [n=mypapit@pdpc/supporter/active/mypapit] has joined #ubuntu [04:55] ari_stress, yup i don't have fingers now! i'm typing with dasher using a helmet! [04:55] ultr1, you,ll probably need the -dev as well [04:55] Pelo, ok lemme check [04:55] ultr1: knew it ;) sudo aptitude install libglib2.0-dev === Evercat [n=allan@82-41-37-26.cable.ubr05.edin.blueyonder.co.uk] has joined #ubuntu === bichissimo [n=bichissi@189.172.30.171] has left #ubuntu ["Ex-Chat"] === cappicard [n=cappicar@CPE-24-163-224-130.kc.res.rr.com] has joined #ubuntu [04:55] I'm testing PDGIN 2.0 so I love it === Digital_Pioneer [n=digitalp@adsl-69-154-61-49.dsl.ltrkar.swbell.net] has left #ubuntu ["Konversation] [04:55] bulmer: it says that wlan0 device does no exisit. i think its eth0 but when i do iwlist eth0 i get unknown command eth0. [04:55] bye === ojon [n=joao@201-42-214-234.dsl.telesp.net.br] has joined #ubuntu === neott [n=neott@cpc4-pool2-0-0-cust1010.sotn.cable.ntl.com] has joined #ubuntu [04:56] can somebody help me with this wifi problem? === Jose [n=Administ@201.195.150.234] has left #ubuntu [] [04:56] zabin iwlist eth0 scan [04:56] ultr1: a rule of thumb: when it says you need a library , but a lib at the beginning, do aptitude search | grep dev [04:56] *put [04:56] krammer, it would help if you stated the problem [04:56] krammer what kind of wifi nic card you have? [04:56] bulmer: it found it there and it is listed as channel 6 === hyperbola_ [n=hyperbol@76.206.23.163] has joined #ubuntu [04:56] i had a wi fi problem yesterday and i couldnt figurer it out, o installed a diffrent card and it worked [04:57] all of a sudden i can connect to my router nor my college [04:57] does anyone know the name of a linux casino program? not for actual gambling? [04:57] booster_: that is the best troubleshooting I've heard today ! [04:57] bulmer: if i set this up using the file you said before will network manager still work? [04:57] nickrud, thanks im very new to linux and am trying to learn alot, i have switched from windows and am stuck alot so dont mind stupid questions === dori [n=dori@wikipedia/Dori] has joined #ubuntu === ianmcorvidae [n=ianmcorv@ip72-211-151-55.tc.ph.cox.net] has joined #ubuntu [04:57] !game > malocite check for a private message windows with instructions from ubotu [04:57] zabin how many AP do you detect operating at channel 6? maybe move yours to 11 or 1 [04:57] ultr1: np, simple stuff I can help with === angelo [n=angelo@c-76-28-15-174.hsd1.ct.comcast.net] has joined #ubuntu [04:57] zabin nm-manager uses that same file [04:58] i need to figure out what kind of graphics card i need to run beryl [04:58] bulmer: what is the file again sorry? === shunter [n=rxlt@c-98-199-98-135.hsd1.tx.comcast.net] has joined #ubuntu [04:58] zabin scroll up please [04:58] krammer: what changed? [04:58] booster_, ask the ppl in #beryl or #compiz-fusion or #ubuntu-effects , try to avoid nvidia or ati [04:58] bulmer: using redeon === iSong [n=iSong@210.202.123.32] has joined #ubuntu [04:58] gtg === toasty [n=tyler@host-69-145-177-173.msl-mt.client.bresnan.net] has joined #ubuntu === sabrina__ [n=sabrina@adsl-75-55-115-198.dsl.austtx.sbcglobal.net] has joined #ubuntu [04:58] frog all of a sudden i cannot connect to the interent === edz_ [n=edz@adsl-69-151-200-102.dsl.hstntx.swbell.net] has joined #ubuntu [04:58] im useing intel [04:59] i tried pinging google but no reponse [04:59] i need help installing my ati driver in ubuntu [04:59] krammer does your nic have an ip address assigned? [04:59] or actually i need the link [04:59] krammer: wireless or wired? === angelo [n=angelo@c-76-28-15-174.hsd1.ct.comcast.net] has joined #ubuntu [04:59] wireless [04:59] bulmer: that file does not have any information about other networks that i ahve connected to though. [04:59] hello [04:59] !ati | edz_ [04:59] edz_: To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto [04:59] booster_, depending on how much memory you hve it shold be ok , I have one, but I don'T run the effects becase I find them annoying === Globo [n=FullT@200.178.233.51] has joined #ubuntu === JB_ [n=JB@ncao.ntcif.telstra.com.au] has joined #ubuntu [04:59] i never had a problem for months and now i have this problem i also unistalled firestarter === nickrud lived for windows that burned up [04:59] krammer: check iwconfig for starters [05:00] zabin you may have to google search the options you can use in that file..i know of wireless-essid [05:00] kept the windows guys away [05:00] zabin: i dont recall all the options..so you much google for it [05:00] ok i got libglib-2.0-dev and when i try to run the autopackage it still says i need to upgrade? should i restart? [05:00] no wirelss extensions [05:00] nickrud, what ? [05:00] krammer: where's your wireless interface gone? === JB_ [n=JB@ncao.ntcif.telstra.com.au] has left #ubuntu [] [05:01] Pelo: one of the effects was the windows would go out in a flame of glory when you closed them [05:01] smoke and all [05:01] educated me [05:01] krammer: do a iwconfig and see if you're getting an ip address [05:01] nickrud, ah yes, I remember , [05:01] Pelo: made the windows guys look a littel crossed [05:01] no ip [05:02] lo no wireless extensions etho no wirelss bah blah === Pelo thinks flaming windows xp would have been apropriate [05:02] krammer: you won't get an ip without a wireless if [05:02] ultr1: no, rebooting won't help, probably needs another library as well === bikeboy [n=bikeboy@220-253-46-108.VIC.netspace.net.au] has left #ubuntu ["Leaving"] === Pie-rate [n=jschall@cust-69-19-214-178.static.o1.com] has joined #ubuntu === scguy318 [n=nodisgod@pool-71-123-180-118.dllstx.fios.verizon.net] has joined #ubuntu [05:02] nickrud, that sucks cus it doesnt tell me which one to get === PanzerMKZ [i=Panzer@dialup-4.88.76.246.Dial1.Atlanta1.Level3.net] has joined #ubuntu [05:02] is there anyway to work out what 'non-zero' means? [05:02] == Spawn extension (macro-queue_helpdesk, s, 7) exited non-zero on 'SIP/maxnetvoip-b5a0d6e8' in macro 'queue_helpdesk' [05:02] i.e; ^ [05:02] nickrud, I was quite interested in the water effects but my card would not support it , too bad that was realy the only thing I liked === sx66 [n=sx66@71-95-0-2.static.rvsd.ca.charter.com] has joined #ubuntu [05:03] fujin, go to the forum and do a search for the error msg [05:03] fujin, You might want to go to an Asterisk channel [05:03] doh [05:03] when i iwconfig it looks like it picked up my router thats it [05:03] ultr1: I've never compiled autopackage; maybe there's an autopackage channel that can help. You can search on ircsearch.com [05:03] Pelo, are u sure it was a hardware problem? === winwinwin [n=chatzill@unaffiliated/davidhkmrpowers] has joined #ubuntu === nickrud imagines burning windows in a watery world === darose [n=darose@207-237-193-241.c3-0.avec-ubr1.nyr-avec.ny.cable.rcn.com] has joined #ubuntu [05:04] Evanlec, I woudln'T call it a problem must a limit, it was beryl , a while back, that's what the #beryl ppl told me, everythign else was working fine , I jsut ahve a intel 845g 32 meg === idaho45 [n=idaho@190.75.104.119] has joined #ubuntu [05:04] ultr1: which version of glibc do you currently have now? === sx66 [n=sx66@71-95-0-2.static.rvsd.ca.charter.com] has joined #ubuntu === mrspinx [n=shawn@c-69-138-113-249.hsd1.fl.comcast.net] has joined #ubuntu === ker [n=ker@190.80.224.123] has joined #ubuntu === thejoe [n=joseph@c-69-251-236-45.hsd1.md.comcast.net] has joined #ubuntu === Captain_Inferno8 [n=Bushsuck@adsl-074-166-214-206.sip.bct.bellsouth.net] has joined #ubuntu === Pelo puts his lighter to his win95 cd === dudeicles [n=dudeicle@adsl-75-43-42-72.dsl.skt2ca.sbcglobal.net] has joined #ubuntu [05:05] i wonder if i hate myself enough to try buryl again [05:05] Pelo, oh i gotcha, ya the intel onboard a little flaky with that, u tried fusion? [05:05] #ubuntu-es === dudeicles [n=dudeicle@adsl-75-43-42-72.dsl.skt2ca.sbcglobal.net] has left #ubuntu ["Ex-Chat"] === Sinistral_ [n=Sinistra@d131100.adsl.hansenet.de] has joined #ubuntu === riotkittie puts a marshmallow to Pelo's flaming Win disc === DWSR [n=doingwha@xtreme-42-120.dyn.aci.on.ca] has joined #ubuntu [05:05] err beryl. [05:05] krammer: do a iwconfig and see if you're getting an ip address..are you? [05:05] no [05:05] Anyone knowledgable about VNC in here? [05:05] has anyone had an issue wherein the contents of firefox looked slightly stretched?? [05:06] i really hate to reinstall ubuntu [05:06] krammer you need to reply with a prefix on your response to me or else i will miss it [05:06] DWSR: 1000 peeps in chan you realise === ker [n=ker@190.80.224.123] has left #ubuntu ["Saliendo"] [05:06] Evanlec, no, I didn'T realy care for effects anyway, I just played with it for 15-30 minutes to see what it was all about and it was enough [05:06] how do i that [05:06] DWSR: asking is just spam [05:06] DWSR whats the question? [05:06] Pelo, o i c === scipio_ [n=c@cpe-75-85-206-61.dc.res.rr.com] has joined #ubuntu [05:06] krammer, put your /home on a sepereate partition, that way you get all your settings back === nodesyn [n=syn@72.170.55.118] has joined #ubuntu [05:07] Frogzoo_: I realize, hence why I asked the first question. :-P [05:07] be honest with you i dont know how [05:07] krammer, all your settings? i thot /home just kept ur data [05:07] bulmer, when i try to compile autopackage it says 1.0 [05:07] !anyone | DWSR [05:07] DWSR: A large amount of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? [05:07] err pelo [05:08] bulmer, actually no it doesnt say my current v [05:08] ultr1: in that case thats a major work..you may have to refer to the book embedded linux to get a step by step tutorial on compiling a glibc [05:08] Frogzoo_: But my question started with "Anyone", so :-P === yUSiyEEE [n=yusiye@cpe-75-84-73-91.socal.res.rr.com] has joined #ubuntu [05:08] Anyways, it doesn't matter. I've figured out my problem. Seems I overlooked something. [05:08] ultr1: did it say glib , or glibc ? [05:08] krammer, jsut use gparted to create a new partition , copy /home to it , then when you reinstall ubuntu , just use the manual partitionning and make a partiton for / select your old /swap and specify your /home partiton , [05:09] glib [05:09] Evanlec, ? [05:09] if i do they i will have the same problem === defrysk [n=defrysk@g173059.upc-g.chello.nl] has joined #ubuntu [05:09] Pelo, u said to put /home on seperate partition, but wouldnt that just keep data, not going to keep ur apps/settings [05:09] ultr1: gnome runs on glib2.0 , so I don't understand why autopackage would claim it's not there. === jaebird [n=jaebird@unaffiliated/jaebird] has joined #ubuntu [05:10] Evanlec, yes it would [05:10] Evanlec: your settings are saved in your homedir (except for server configs) [05:10] this wont solve the problem, also i just use acronis to back up my system [05:10] what kind of settings? [05:10] Evanlec, goto your /home folder and hit crtl_h , [05:10] Evanlec: Everythign that belongs to YOU [05:10] nickrud, yeah that is wierd then [05:10] no kidding === Distort13 [n=matt@cpe-024-074-253-182.carolina.res.rr.com] has joined #ubuntu [05:10] Evanlec, nothing hardware related, but app setings === edz_ [n=edz@adsl-69-151-200-102.dsl.hstntx.swbell.net] has joined #ubuntu [05:10] but certainly it wouldnt keep things like xorg.conf [05:10] heya [05:10] ultr1: definitely an autopackage channel question. [05:10] haha ok thanks [05:10] Evanlec, you'll seill need to reinstall apps === DWSR [n=doingwha@xtreme-42-120.dyn.aci.on.ca] has left #ubuntu [] [05:11] Evanlec, no nothing hardware related [05:11] but if u re-installed lets say x-chat, it would keep your settings for it? === chad [n=chad@195.204.175.24.cfl.res.rr.com] has joined #ubuntu [05:11] i installed the ati drivers on ubuntu and click on the system, restricted device manager, and clicked on my ati card, but when i type fglrxinfo it still gives me the mesa project thing [05:11] or firefox ? [05:11] Evanlec, yes, and your bookmarks and cookies [05:11] edz_: did you restart X? [05:11] edz_: did you reboot? [05:11] yeah [05:12] wow! [05:12] Evanlec, old emails [05:12] i sure did [05:12] lol [05:12] Evanlec, themes, background, pannel apps, etc === syrq [n=syrq@cc739053-a.mp1.dr.home.nl] has joined #ubuntu === File13 [n=File13@adsl-66-141-167-241.dsl.rcsntx.swbell.net] has joined #ubuntu [05:12] hey im a new ubuntu user :) === h1st0_ [n=histo@h156.112.29.71.ip.alltel.net] has joined #ubuntu [05:12] Pelo, do you keep your /home/ directory through distro upgrades even? [05:12] !welcome | Distort13 [05:12] Distort13: Welcome to #ubuntu - the Ubuntu support channel. [05:12] Distort13, welcome to the madhouse [05:12] was wondering if anyone had a answer to my problem === e [n=diat@12.19.38.31] has joined #ubuntu [05:13] or re-installs [05:13] welcome Distort13 your not the only one haha [05:13] Evanlec, yes that's what I do [05:13] edz_: prob check your xorg.conf, the Device section -> Driver i think [05:13] Distort13: ask away, nothing ventured, nothing gained [05:13] yeah [05:13] Evanlec, taht is the whole point, when you reinstall the / partiton gets formated, if your /home in on a seperate partition all your data and settings are safe [05:13] my device says Generic video card [05:14] edz_: the driver? [05:14] driver is fglrx [05:14] videooverlay on [05:14] opengloverlay off [05:14] pci:1:0:0 [05:14] its agp card [05:14] weird, that should be it [05:14] im trying to get my Counter strike source to work i have it installed and everything through wine and when i try to launch the game it shows me the normal background screen to the game then just quits and leaves me in 800x600 [05:14] Pelo, i see, but u wouldnt dare putting a different distro on there and using those settings would you? === e is now known as ebirtaid === stunatra [n=stu@64.sub-75-212-203.myvzw.com] has joined #ubuntu === h1st0 [n=histo@h156.112.29.71.ip.alltel.net] has joined #ubuntu [05:15] Distort13: what Wine version, what vid card? [05:15] Evanlec, yes [05:15] Distort13: and if you dont get an answer here #winehq i think === citronbleu-v [n=citronbl@lor34-1-82-240-236-19.fbx.proxad.net] has joined #ubuntu [05:15] i guess as long as the apps were the same... [05:15] and the window manager..? [05:15] the latest wine and ati x850 pro === EdibleEgg__ [n=alex@cpe-071-068-020-166.carolina.res.rr.com] has joined #ubuntu [05:15] Distort13: from Ubuntu's repo or Wine's BudgetDedicated? === b33r [n=b33r@212.36.209.171] has joined #ubuntu [05:15] Evanlec, the only problems would arise if the apps were different versions, they might not be able to use the exact settngs or would update them [05:15] ihave wow runnin fantasticly but source just wont [05:16] from wines === `eric- [n=eric@cpe-76-173-57-21.socal.res.rr.com] has joined #ubuntu [05:16] i see === The_Fonz [n=greg@216-99-210-117.cust.aracnet.com] has joined #ubuntu [05:16] ok guys im running a system with a p3 cpu 512 mb ram, and it has an intel onboard graphics chip.....i think its like 64 mb, not sure, do you think it will run beryl?? [05:16] what's the default location of jre? [05:16] Distort13: http://appdb.winehq.org/appview.php?iVersionId=3731 might be enlightening === thejoe [n=joseph@c-69-251-236-45.hsd1.md.comcast.net] has joined #ubuntu [05:16] if i want to use kde [05:16] and i'm using gnome currently [05:16] do i have to reinstall? === martalli [n=martalli@76.77.234.232] has joined #ubuntu [05:16] booster_, you'd hve to ask in #beryl [05:16] or can i just switch [05:16] ok === sanguinarius [n=sanguina@AMontsouris-152-1-7-100.w82-123.abo.wanadoo.fr] has joined #ubuntu === urthmover [n=me@adsl-68-94-224-35.dsl.rcsntx.swbell.net] has joined #ubuntu === BlueXero [n=crodgers@203-184-39-148.jetbuster.co.nz] has joined #ubuntu === ScreaminIk1 [n=toaster@219-100.usachoice.net] has joined #ubuntu [05:17] cheebz88, sudo apt-get install kubuntu-desktop [05:17] b33r: /usr/lib/jvm/?? [05:17] what's the command to modify my x resolution? [05:17] Pelo, thank you [05:17] Distort13, you'd have to ask in #winehq [05:17] i have an ati radeo 9500 (which is running correctly - fglrxinfo gives proper ATI specs) however, the screen looks stretched on my 20" dell lcd....any help would be greatly appreciated [05:17] nickrud, thanks [05:17] b33r: you thinking about installing a bin from sun? [05:17] Screaminlk1 the Screen Res applet? sudo dpkg-reconfigure xserver-xorg may be what you're thinking of === Clinton__ [n=clinton@c-68-61-79-1.hsd1.mi.comcast.net] has joined #ubuntu [05:18] cheebz88, that will get you both desktop and default apps , you can choose which to use at login [05:18] !pastebin [05:18] pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic) [05:18] nickrud, yes === yookoala [n=Koala_Ye@061092028037.ctinets.com] has left #ubuntu [] [05:18] nickrud, anything else I need to know? === chuck`_ [n=chuck@c-69-248-224-147.hsd1.nj.comcast.net] has joined #ubuntu [05:18] b33r: you can get sun's java from the repos: sudo aptitude install sun-java6-jre sun-java6-plugin , no need to hand install java === evri2 [n=evri2@85.108.108.140] has joined #ubuntu [05:18] nickrud, I want the latest version :/ === nandemonai [n=nandemon@ppp121-45-120-131.lns11.adl6.internode.on.net] has joined #ubuntu [05:19] b33r, enable the backport repos and you can insall sun-java6-jre [05:19] nickrud, I already have the repos one I'm experiencing some problems with a game === aSt3raL [n=eric@70-57-68-16.tukw.qwest.net] has joined #ubuntu [05:19] !java | b33r that will help you get a decent hand install [05:19] b33r that will help you get a decent hand install: To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository. Enable the backports repository on Edgy to install sun-java6-jre === Clinton__ [n=clinton@c-68-61-79-1.hsd1.mi.comcast.net] has left #ubuntu [] === DShepherd [n=dwight@72.252.133.113] has joined #ubuntu === KennethP_ [n=kpo@80.167.165.222] has joined #ubuntu === dawn [n=dawn@tequilla.exist.com] has joined #ubuntu [05:21] more fun to do it on my own ;p === Dougie [n=dougie@pool-71-240-28-61.pitt.east.verizon.net] has joined #ubuntu [05:21] b33r: the link should show you how to integrate nicely [05:21] b33r, as long as " we" don'T hve to share in the fun [05:21] lol === xjkx [n=x@201009107041.user.veloxzone.com.br] has joined #ubuntu [05:21] Pelo: if i have the default login window and install kde, i can select it from there? [05:22] Ok, so there is this bug that freezes me on X, even my keyboard freezes, the mouse, everything, i cant just do anything ! although the machine keeps serving proxy lol? if i start vncserver, i can remotly log on other machine and kill X rofl, my point is, is there a way to give more priority to keyboard? or any other idea better than that [05:22] shifty-, if you have ubuntu installed and you install kubuntu-desktop you can chose to load gnome or kde from the login window === taggie [n=taggie@c-68-61-100-197.hsd1.mi.comcast.net] has joined #ubuntu [05:23] b33r: sorry, that's changed a lot since I last looked, it used to have some good instructions about adding your new sun to the alternatives, so everything knew where to look === zabin [n=zabin@130-127-46-3.mccabe.resnet.clemson.edu] has left #ubuntu [] [05:23] Pelo: thanks [05:23] trying to install now I'll tell u the results in sec :) === Ashfire908 [n=ahampe@wikipedia/Andrew-Hampe] has joined #ubuntu [05:24] nickrud, thanks for the help, it was even simpler than i thought, model=thinkpad, go figure [05:24] taggie: lol [05:24] that was difficult === subpar [n=subpar@cpe-70-113-220-33.austin.res.rr.com] has joined #ubuntu [05:25] but you were right on the money with the modprobe option. so, thanks again. want to go for 2 in a row? i'm having problems with a new gutsy alternative install, apt-get update always seems to fail with bzip2 problems. [05:25] man, java-package is over a year old, no wonder someone minimized it [05:26] taggie: full error on a pastebin, and maybe [05:26] hi === krammer [n=krammer@c-66-177-57-246.hsd1.fl.comcast.net] has joined #ubuntu [05:27] nickrud, is it normal to have 2 folders in jvm "java-6-sun" and "java-6-sun-1.6.0.00? === dudeicles [n=dudeicle@adsl-75-43-42-72.dsl.skt2ca.sbcglobal.net] has joined #ubuntu [05:27] b33r: if you ls -l , you'll see that the short one is a link to the long one. [05:28] wifi not working / so used a lan line still cannot connect to the internet === zerdith [n=zerdith@66-188-62-254.dhcp.bycy.mi.charter.com] has joined #ubuntu [05:28] ubuntu uses gdm by default, correct? [05:28] oh thanks dumb me ;p [05:28] shifty-, ubuntu does, kubuntu uses kde [05:28] shifty-: xubuntu does too === PieSpy [n=piespy@ip72-211-151-55.tc.ph.cox.net] has joined #ubuntu [05:28] ok === vexati0n [n=vex@host-69-145-50-116.csp-wy.client.bresnan.net] has joined #ubuntu === Rynoo [n=ryan@12.178.97.27] has joined #ubuntu [05:29] Can anyone recommend a PPP dialup manager for Ubuntu? === KennethP__ [n=kpo@80.167.165.222] has joined #ubuntu [05:29] !dialup | Rynoo [05:29] Rynoo: You want to connect via dial-up? Read https://help.ubuntu.com/community/DialupModemHowto [05:30] krammer is it getting an ip address? === gonzoism [n=joe@tx-71-2-126-75.dhcp.embarqhsd.net] has joined #ubuntu [05:30] Rynoo, there is gnome-ppp === NeanT [i=1000@86.120.95.160] has joined #Ubuntu [05:31] Rynoo, it uses wvdial [05:31] what is the command to pull a .config out of the kernel, when /proc/config.gz isn't there ? === fender_ [n=fender@mail.dropletsap.com] has joined #ubuntu === jplove71 [n=jplove@c-24-118-247-51.hsd1.mn.comcast.net] has joined #ubuntu === KevinOman [n=kevin@66-227-221-83.dhcp.klmz.mi.charter.com] has left #ubuntu [] [05:31] gonzoism, cat /proc .... [05:31] Rynoo pppconfig is pretty awesome [05:32] Pelo ? [05:32] b33r: this is not official advice, just personal: I'd get the java-package 0.34 from debian, and use it to make a package [05:32] I was completing your command , cat /proc/config.gz [05:32] gonzoism: i think make oldconfig [05:32] are there any programs designed to rescue scratched CDs? [05:33] nickrud, O.o === Bucketface [n=charles@89.204.196.144] has joined #ubuntu === cschauer [n=CraigSch@c-24-16-136-187.hsd1.mn.comcast.net] has joined #ubuntu [05:33] nickrud, why? === Bucketface [n=charles@89.204.196.144] has left #ubuntu ["Fais] === szf [n=sean@c-24-60-10-245.hsd1.ma.comcast.net] has joined #ubuntu [05:33] thanks all [05:33] b33r: fiesty has 0.28, which doesn't support java6, but the one from debian does. It creates a deb you can install, and then set the alternative to. === Rynoo [n=ryan@12.178.97.27] has left #ubuntu ["Leaving"] [05:34] yurimxpxman, I think someone menitonned forcing mount a few days ago for a similar problem [05:34] If someone could help me out, I installed ubuntu 7.0.4 desktop version to my computer, it will not load the normal desktop, it goes to a command type prompt [05:34] i have a compiled kernel, and i need the .config out of it. and /proc/config.gz isn't there, can't you strip it out ? === casperzshado [n=adam@c-24-1-112-255.hsd1.il.comcast.net] has joined #ubuntu === Evanlec [i=evan@c-75-67-237-157.hsd1.nh.comcast.net] has joined #ubuntu [05:34] cschauer is that gutsy or feisty ? [05:34] nickrud, where can I get dl it? do u know any link? === arang2 [n=arang@200.106.43.214] has joined #ubuntu [05:35] gutsy or feisty? === pro_zack [n=zack@154.5.223.60] has joined #ubuntu [05:35] 7.04 is feisty ? === ultr1 [n=ultra@67-58-193-94.amtelecom.net] has left #ubuntu [] [05:35] Jordan_U, did u say u had experience with intel-soft-raid? [05:35] gonzoism: yes [05:35] b33r: http://packages.debian.org/sid/java-package . Read the bug reports, change log, and decide for yourself [05:35] Evanlec, No [05:35] nickrud, ok thanks [05:35] cschauer are you logged in ? does startx do anything ? [05:35] disreguard that, i suck cocks [05:35] anyone have experience with intel's software raid and installing ubuntu? === mode/#ubuntu [+o tonyyarusso] by ChanServ === mode/#ubuntu [+b *!*@adsl-66-141-167-241.dsl.rcsntx.swbell.net] by tonyyarusso [05:36] gonzoism: let me try === File13 [n=File13@adsl-66-141-167-241.dsl.rcsntx.swbell.net] has left #ubuntu [requested] === mode/#ubuntu [-o tonyyarusso] by tonyyarusso [05:36] lol === pro_zack [n=zack@154.5.223.60] has joined #ubuntu [05:36] that should put the fear of tonyyarusso in the channel [05:36] Jordan_U, i just tried installing with the alternate CD and no dice, didnt detect my array properly === Babble [n=wardc@cpe-24-161-205-69.bak.res.rr.com] has joined #ubuntu [05:37] !raid | Evanlec Might be useful info [05:37] Evanlec Might be useful info: Tips and tricks for RAID and LVM can be found on https://help.ubuntu.com/community/RaidConfigurationHowto and http://www.tldp.org/HOWTO/LVM-HOWTO === citronbleu-v [n=citronbl@lor34-1-82-240-236-19.fbx.proxad.net] has joined #ubuntu [05:37] Hiya guys, Has anyone come across an issue with maximizing and unmaximizing windows in gnome with desktop effects enabled? I'm running Feisty and the Restricted NV driver. Windows will maximize but most the time after doing so I lose control of the window borders (cant do anything with them, like they don't exist) and I have to unmaximize via the window list. [05:37] gonzoism: udevd-event[1928] : run_program '/sbin/modprobe/' abnormal exit [05:37] Jordan_U, i've read it [05:37] im having trouble booting up sometimes.. i have my comp dual booted with windows [05:37] not sure what hte problem is [05:37] any suggestions [05:37] nandemonai, you should ask in #ubuntu-effects [05:37] Pelo, Ah will do thanks. [05:38] Sam_Wesin, what's the symptom ? [05:38] Sam_Wesin, What sort of trouble? [05:38] gonzoism: startx did nothing === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has joined #ubuntu [05:38] you should read him on the mail lists, burn baby [05:38] nickrud, it says that it works for sun 1.4 and 1.5 not 1.6 :/ === teKnofreak [n=technofr@unaffiliated/teknofreak] has joined #ubuntu [05:38] not sure if its ubuntu related, but at the moment windows has a really slow login [05:38] b33r: read the changelog, it's more recent [05:38] cschauer, what video card ? [05:38] before that the boot grub wasnt being found [05:38] mmk [05:38] Geforce FX 5200 [05:39] Pelo: it worked with the live cd inserted === kanuha [n=eddie@ip68-1-32-122.pn.at.cox.net] has joined #ubuntu === tyche [n=craig@unaffiliated/tyche] has joined #ubuntu [05:39] b33r: that's all been done since fiesty came out. I tried to write some wiki stuff about it a year ago, I wish this guy had started earlier [05:39] Pelo: only after I installed and restarted, with the live cd out, it started this === booster_ [n=booster@frtc-fib-dsl-450200.mis.net] has left #ubuntu ["Ex-Chat"] === jonkelle [n=jonkelle@adsl-68-94-193-160.dsl.rcsntx.swbell.net] has joined #ubuntu [05:39] Sam_Wesin: so grub is no longer there? [05:39] it is\ [05:39] more b33r [05:40] some times it wont find it though [05:40] cschaue try sudo dpkg-reconfigure xserver-xorg and try with the vesa driver if it diesont, work with the one for your card [05:40] i dunno [05:40] robert_? :o [05:40] cschauer using their drivers ? sudo dpkg-reconfigure xserver-xorg and see if X works. [05:40] Sam_Wesin: what sort of set up do you have with the daul boot? is it on one drive? === Coole^ [n=justin@71-212-52-231.tukw.qwest.net] has joined #ubuntu [05:40] gonzoism: cat /boot/config-2.6.15-28-386 [05:40] yea [05:40] yes? I was making a pun off your nickname :P [05:40] one drive [05:40] bulmer thanks [05:40] Sam_Wesin, plese don'T use the enter key for punctuation [05:40] :D [05:40] as I usually use 'b33r' :D :P === RikkitProff [n=rikkit@77.50.89.24] has joined #ubuntu [05:41] bulmer i wouldn't have thought about that === Almighty1Henaro is now known as Almighty_Henaro [05:41] Sam_Wesin: I'm still confused on the problem slow windows or not seeing grub allt he time? [05:41] g'night folks [05:41] gonzoism: i have to look at my notes..i cant remember them myself === olivier_ [n=olivier@modemcable202.231-57-74.mc.videotron.ca] has joined #ubuntu [05:41] its probably two seperate problems === citronbleu-v [n=citronbl@lor34-1-82-240-236-19.fbx.proxad.net] has joined #ubuntu [05:41] Anyone know if theres a way in GNOME to make it change virtual desktops when the cursor goes to the edge of the screen ? [05:41] night Pelo, late [05:42] Pelo, Gonzoism: It's at a shell prompt, these commands are not doing anything [05:42] dras_, There is always a way [05:42] dras_: install the package brightside, it gives you that and some more === duns_s [n=duns_s@mnhm-590c3d92.pool.einsundeins.de] has joined #ubuntu [05:42] coool thanks [05:42] how can i boot up into safe mode? its not an option on my boot menu. [05:42] cschauer are you pressing enter after typing them ? [05:42] Sam_Wesin: it's called recovery mode [05:42] Hello! [05:42] gonzoism: yes [05:43] Sam_Wesin: safe mode in windows? [05:43] yes [05:43] cschauer and no output or anything ? [05:43] Sam_Wesin: if you don't see it, when the screen says something about grub, hit escape === taggie [n=taggie@c-68-61-100-197.hsd1.mi.comcast.net] has joined #ubuntu [05:43] gonzoism: nothing [05:43] Sam_Wesin: hit f8 right before the window logo appears then select it. [05:43] bie === ozozo [n=m@63.Red-88-7-158.staticIP.rima-tde.net] has left #ubuntu ["chao"] [05:43] hit ctrl-c control C === nickrud bit === phoochka [n=phoochka@122.169.15.63] has joined #ubuntu [05:43] I need help with ubuntu....! when I type my login it goes to a brown screen but nothing happen... what a should do? [05:43] olivier_: are you using the cd or an install? [05:44] olivier_: what type of video card do you have? [05:44] cd [05:44] cschauer hit ctrl-c control C === mode/#ubuntu [+o tonyyarusso] by ChanServ [05:44] Intel === wonton_ [n=wonton@67-150-218-100.sttl.mdsg-pacwest.com] has joined #ubuntu [05:44] gonzoism: did, nothing, it was as though I had pushed enter [05:44] cschauer type uname -a press enter. anything that time ? === thekorn [n=thekorn@a89-182-8-211.net-htp.de] has joined #ubuntu [05:44] olivier_: if you are using the cd you shouldn't have to log in. [05:44] nickrud, uhh how do I use this package? lol === mode/#ubuntu [-bbbb *!*@71-220-113-95.mpls.qwest.net *!*@c-76-28-153-194.hsd1.wa.comcast.net *!*@199.213.95.219.cbj02-home.tm.net.my *!*@pool-71-111-51-201.ptldor.dsl-w.verizon.net] by tonyyarusso === mode/#ubuntu [-o tonyyarusso] by ChanServ [05:45] cschauer not important what it says but if it says anything at all [05:45] after that I've install ubuntu...! === Frogzoo [n=Frogzoo@202.155.165.25] has joined #ubuntu [05:45] b33r: the instructions are in /usr/share/doc/java-package ; it's pretty straight forward [05:45] my ubuntu was working for a long time! [05:45] olivier_: ctrl+alt+f1 and log on === nickrud goes to read the instructions, hasn't read them in a long time [05:45] Frogzoo !!!! :) [05:46] I've already logged on === sanguinarius [n=sanguina@AMontsouris-152-1-55-44.w83-202.abo.wanadoo.fr] has joined #ubuntu [05:46] FrogZoo !!! [05:46] gonzoism: Linux(none) 2.6.20-15-generic #2 SMP (says date) i686 unknown [05:46] gonzoism: /wave [05:46] gonzoism: is the output === moonie is now known as no_gatez_fan === joshritger [n=josh@adsl-76-199-148-73.dsl.milwwi.sbcglobal.net] has joined #ubuntu [05:46] cschauer k not try the dpkg command. i'll retype it for ya. === SireeBob [i=SireeBob@unaffiliated/sireebob] has left #ubuntu ["Leaving"] === BlueT_Malaysia is now known as BlueT_HiTB [05:46] gonzoism: ok === shunter [n=rxlt@c-98-199-98-135.hsd1.tx.comcast.net] has joined #ubuntu === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has joined #ubuntu [05:47] cschauer sudo dpkg-reconfigure xserver-xorg === PinkFloyd [n=brandon@docsis-cbm-17-184.nclxtn.lexcominc.net] has joined #ubuntu [05:47] b33r: make-jpkg , answer the questions [05:47] cschauer fixed ? === JesterJAG [n=chatzill@c-71-228-50-48.hsd1.il.comcast.net] has joined #ubuntu [05:47] Im having trouble launching KDE apps in Gnome. They simply wont load at all. What can I do? [05:47] bulmer and after? i'm in the termnal [05:47] how do you delete wine and all the configurations (i used apt-get to install) because I need to reinstall it from scratch [05:47] ? [05:47] I am using beryl and I have my windows decorator set to metacity. If I go into the default gnome theme preferences app it lets me pick a gtk2 theme but not metacity. Can someone help me fix this? [05:47] mike6546: sudo apt-get --purge remove wine [05:48] ! Living people! [05:48] Sorry, I don't know anything about living people! - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [05:48] mike6546: rm -rf ~/.wine [05:48] gonzoism: /bin/sh: sudo: not found [05:48] PinkFloyd any errors ? missing libs or what ? [05:48] Living people! [05:48] gonzoism, not that I know of [05:48] bah which one? === side88 [n=paravirt@2001:5c0:8fff:fffe:0:0:0:6e65] has joined #ubuntu [05:48] b33r: man make-jpkg gives the full instructions, and SUPPORTED in that file lists the exact packages from sun that are supported [05:48] gonzoism, seems to be all KDE apps and a few others [05:48] okaye nm [05:48] both [05:48] cschauer hm... try these commands. which sudo whereis sudo locate sudo 3 commands === wckdkl0wn [n=wckdkl0w@71.30.24.240] has joined #ubuntu === citronbleu-v [n=citronbl@lor34-1-82-240-236-19.fbx.proxad.net] has joined #ubuntu [05:49] gonzoism: ok [05:49] how would i kill a specific app? === thully [n=thully@southquad-187-17.reshall.umich.edu] has joined #ubuntu [05:49] mike6546: also don't use the ubuntu wine repo which is dated, use the budgetdedicated repo mentioned in the ubuntu wiki doc [05:49] mike6546: both [05:49] gonzoism: all commands respond "not found" [05:49] wckdkl0wn ps ax get its id, and kill id_number or killall appname (killall firefox) [05:49] olivier_: so you are able to log on..just fix your xorg.conf to give you X window === m12 [n=m1r0@83-131-202-101.adsl.net.t-com.hr] has joined #ubuntu [05:49] cschauer weird. is this a new install ? [05:50] gonzoism: yes, it worked with the live cd inserted though [05:50] frogzoo i am using the wine repo from winehq.org [05:50] I can get xubuntu to run on a machine, but ubuntu will not load up (/bin/sh ... tty... error). I figured out [on a different machine] how to access the HDs with ubuntu, but can't seem to be able to do the same as easily with xubuntu. [05:50] The program 'make-jpkg' is currently not installed. You can install it by typing: [05:50] sudo apt-get install java-package [05:50] =/ [05:50] gonzoism: suggest fresh install? [05:50] cschauer i don't think it installed right. [05:50] cschauer yeah [05:50] I _need_ to backup some images off of this drive (before I format it)... [05:50] bulmer I'v already reinstall gdm in the recovery mode with apt-get remove --purge gdm and apt-get install gdm and it doesn't work anymore... === rockets [n=rockets@pool-71-247-35-247.nycmny.east.verizon.net] has joined #ubuntu [05:50] Anyone here willing and able to help me out? [05:50] Can ntfs-3g read compressed ntfs files [05:50] I will try my best [05:51] gonzoism: alright [05:51] rockets: no [05:51] ok [05:51] cschauer you have the md5sum command ? if so you can md5sum /dev/cdrom and see if the md5sum matches up with the md5sum of the install image (where you got it, ubuntu.iso.md5) [05:51] I try to launch Ktorrent, it doesnt load and there's no errors in dmesg === tyche [n=craig@unaffiliated/tyche] has left #ubuntu ["Leaving] [05:51] olivier_: ihave not recovered a failed X window or gdm windows manager..sorry maybe someone else can assist [05:51] b33r: you need to get the package from that link I gave you === slapfaceware [n=face@58.251.82.226] has joined #ubuntu === DrPppr242 [n=paul@ip72-201-7-229.ph.ph.cox.net] has joined #ubuntu === ShinSR71 [n=mb@cm1104936-a.maast1.lb.home.nl] has joined #ubuntu [05:51] I got it .tar.gz [05:52] after extracting [05:52] I literally do not have a lot of time. :( [05:52] I did sudo make? [05:52] cschauer or if it only takes you a minute or two to dowload it, just get it again. maybe reburn the cd. you are missing stuff, bad install. [05:52] rockets: dont think so, uncompress on Windows === dmarciows [n=marciows@189.141.7.233] has joined #ubuntu [05:52] b33r: the .deb file? === furenku [n=furenku@189.146.243.244] has joined #ubuntu [05:52] b33r: make, then sudo make install a [05:52] I didn't find any .deb [05:52] should I use wine-doors, winebot or winetools? [05:52] scguy318, make install doesn't work [05:52] cschauer but being you already got the cd, you could just give it another go, and see if that works. [05:52] quit === zhan [n=ustczhan@218.22.21.22] has joined #ubuntu [05:52] gonzoism, i cant find firefox in the pid list [05:52] b33r: did you ./configure first then make? === zhan [n=ustczhan@218.22.21.22] has left #ubuntu [] [05:52] jester, tar -cvf /dirtosaveto/pactures.tar /whereveryourpicturesare/* - wils tar the entire dir contents [05:53] scguy318, ./configure doesn't work either [05:53] b33r: http://packages.debian.org/sid/java-package/all/download [05:53] (Those of you already helping others, I'm not looking to take you away from them. I'm looking for someone who isn't already helping someone else.) [05:53] wckdkl0wn ps ax|grep fox [05:53] b33r: you did extract the tarball, right? and why not? === revilodraw [n=sexgod@220-253-25-50.VIC.netspace.net.au] has joined #ubuntu [05:53] gonzoism, 6834 ? Sl 316:58 /usr/lib/firefox/firefox-bin [05:53] anyone know a batch filename changer? [05:53] wckdkl0wn i guess you are wanting to kill firefox ? killall firefox-bin does that too [05:53] scguy318: it's java-package, not a source file. He wants to use one of the latest sun javas [05:53] revilodraw: /bin/bash :P [05:53] mike6546: none of the above? === navid [n=navid@S0106001731c64a0b.ed.shawcable.net] has joined #ubuntu [05:53] wckdkl0wn yep. kill 6834 would kill firefox [05:53] scguy: sorry/ dont get u? [05:54] ok ty === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has left #ubuntu [] [05:54] Hiya, [05:54] or just /whereveryourpicturesare/ , lol [05:54] revilodraw: you can type commands in the shell to achieve a batch rename [05:54] JesterJAG what are you wanting to back up to ? another box, cd, floppy ?? [05:54] scguy: oh cool, how? [05:54] Anyone got any suggestion for best application for ubuntu to use for IRC [05:54] i use Xchat..but its not really the greatest [05:54] b33r: and you'll need one of jre-6u[0-9] -linux-i586.bin [05:54] Xchat is the best Ive seen [05:54] navid BitchX is pretty good. epic too. [05:54] nickrud, yeah I got that === nandemonai [n=nandemon@ppp121-45-120-131.lns11.adl6.internode.on.net] has joined #ubuntu [05:54] navid, Ive seen a copy of nIRC on Damn Small Linux but Ive never been able to find souce for it [05:54] installing the .deb [05:54] navid there is a gui bitchx i think too [05:55] revilodraw: http://lists.debian.org/debian-user/2000/01/msg02742.html, overkill tho, what's the rename that u want to achieve? [05:55] excellent, run again === At0mic_PC [n=arch_ato@host-216-79-252-125.jan.bellsouth.net] has joined #ubuntu === nekostar [n=starz@unaffiliated/starscalling] has left #ubuntu ["~_~"] [05:55] JesterJAG ??? [05:55] navid, you could run mIRC under Wine, it works just fine [05:55] i use xchat currently and its display is really nice but lacks on features [05:55] oh i could [05:55] gonna write this up, it's worth it now [05:55] gonsoism> I need to backup images to either a CD or across the network. [05:55] sweet, thanks PinkFloyd [05:55] i like irssi === thansen|laptop [n=thansen@19.243.sfcn.org] has joined #ubuntu [05:55] Gonsoism> Eventually they need to get to a CD. [05:55] One more question; I've heard rumours about automatix2 not being best thing to use..is it true [05:55] !automatix [05:55] Automatix2 is a block of code which attempts to install some software. When it fails and breaks systems, we don't provide support for it. A creditable analysis from a debian/ubuntu developer is here - http://mjg59.livejournal.com/77440.html (Additional information: /msg ubotu worksforme) [05:55] navid, I havent had problems with it [05:56] navid: I'm using mIRC right now ;) === danieldan [n=kolmillu@189.139.61.61] has joined #ubuntu === giggety [i=darklord@2002:4b3b:a382:1337:0:0:0:1] has joined #ubuntu [05:56] jester, places > cd/dvd creator [05:56] Gonsoism> However, getting them off the machine and backup safely to anywhere is first priority, moving them onto CD Secondary. The method is unimportant, just the result. [05:56] PinkFloyd: just a heads up, be careful when you do an upgrade, that's usually where the bugs pop up [05:56] JesterJAG tar -cf - mp3s/|ssh user@host tar -xf - -C /home/user/ need me to point out what to change ? [05:56] nickrud, I only used it for like 2 things >_> === jafoo0 [n=jafoo0@cpe-66-75-83-72.socal.res.rr.com] has joined #ubuntu === orbisvicis [n=orbisvic@r237036.res.Lehigh.EDU] has joined #ubuntu === nandemonai [n=nandemon@ppp121-45-120-131.lns11.adl6.internode.on.net] has joined #ubuntu [05:57] JesterJAG assuming you have sshd installed somewhere on the network [05:57] !guarddog [05:57] Ubuntu, like any other linux distribution, has firewall capabilities built-in. The firewall is managed using the 'iptables' command (see https://help.ubuntu.com/community/IptablesHowTo), or GUI applications such as Firestarter (Gnome) or Guarddog (KDE). [05:57] PinkFloyd: depending, you might have better luck than sid [05:57] Sweet, Thanks. Gotta go install wine now [05:57] Gonzoism> Yes. I am totally lost. Never used Linux before. [05:57] is winex better then wine [05:57] Gonzoism> I'm using a live CD. Right now nothing else. [05:57] JesterJAG have a linux box on the network ? === someothernick [n=someothe@pool-72-85-194-108.bstnma.east.verizon.net] has joined #ubuntu [05:57] Gonzoism> The xubuntu live-cd box is currently on the network. Yes. [05:57] JesterJAG how big are all the images ? are they all together in a folder ? === jedherzog [n=jedherzo@71-222-109-196.ptld.qwest.net] has joined #ubuntu [05:57] anyone know the printing port/service name (in guarddog) used by a detected printer (cups?) [05:57] hey, how you doing I have a problem configuring my wireless === j_ack [n=j_ack@p508DB91A.dip0.t-ipconnect.de] has joined #ubuntu [05:58] gonzoism> No idea. I'm backing them up for a friend. The pictures are their baby pictures. [05:58] danieldan sudo wifi-radar === winwinwin [n=chatzill@unaffiliated/davidhkmrpowers] has joined #ubuntu [05:58] gonzoism: ok [05:58] Gonzoism> I'm assuming the pictures to be anywhere and everywhere... and unknown size. [05:58] JesterJAG do you know which ones ? are they all in a folder ? lol, you have to be able to get to the pictures to find them [05:58] Frogzoo, scguy318 turns out ntfs-3g can read compressed files but cant write to them [05:58] JesterJAG ok. then you can get a list like this. [05:58] I suppose wineX is used for gaming purposes only === jonli447_ [n=root@c-24-1-141-249.hsd1.il.comcast.net] has joined #ubuntu [05:59] Gonzoism> I do understand that. I want to get drive access to search the drive for them. === Weng_Lap [n=tony@c-68-34-34-199.hsd1.md.comcast.net] has joined #ubuntu [05:59] rockets: really? didn't know that :) [05:59] navid, its cedega now, and its best used for northing. [05:59] navid: I just use wine for gamming [05:59] wtf [05:59] can someone help me? I got a blank screen after my login... what can do? [05:59] tony@SLAB-UBUNTU:~$ sudo firefox [05:59] Password: [05:59] You should really not run firefox through sudo WITHOUT the -H option. [05:59] Anyway, I'll do as if you did use the -H option. [05:59] rockets: interesting [05:59] nickrud, I installed it [05:59] navid, regular wine has a way better D3D engine then Cedega does [05:59] JesterJAG you in ubuntu cd ? [05:59] nothing changed [05:59] whoops [05:59] wrong channel [05:59] I see [05:59] Weng_Lap, why are you running FF under sudo anyway, lol [05:59] nickrud, Java(TM) SE Runtime Environment (build 1.6.0-b105) [05:59] b33r: now, sudo update-alternatives --config java === kb0od1 [n=tim@dsl001-133-246.pdx1.dsl.speakeasy.net] has joined #ubuntu === Weng_Lap [n=tony@c-68-34-34-199.hsd1.md.comcast.net] has left #ubuntu ["Ex-Chat"] [05:59] JesterJAG keep up with me, i'll sign off and go to sleep when we finish === ir8 [n=picsandp@58.173.65.141] has joined #ubuntu [05:59] hi guys. I was wondering, do you guys happen to know of a version of zend optimizer that works with Feisty for ppc ? [05:59] Gonzoism> xubuntu, live CD is loaded. Ubuntu would not load. [05:59] navid, cedega is based on a version of wine thats like 10 years old or something [05:59] do any of you know of a way to play RealVideo 3? [06:00] navid: Cedega is also payware [06:00] yurimxpxman, install realplayer, theres aq linux version [06:00] JesterJAG k, its mounted in /media/ go ahead and check [06:00] !real | yurimxpxman [06:00] yurimxpxman: For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats [06:00] haha, I saw in one of the forums how this user was saying wineX (Cedega) was performing a lot better then wine for starcraft [06:00] can someone help me? I got a blank screen after my login... what can do? [06:00] gonzoism: problem is i get this message wmaster0 Interface doesn't support scanning : Operation not suppported" i get the same message thousands of times [06:00] rockets: isn't there an xine codec or anything? === tehk [n=tehk@c-71-59-90-172.hsd1.nj.comcast.net] has joined #ubuntu [06:00] JesterJAG you know how to get there ? [06:00] nickrud, this one /usr/lib/jvm/java-6-sun/jre/bin/java ? [06:00] yurimxpxman, it doesnt work well [06:00] navid: its possible but you have to pay for cedega [06:00] Gonzoism> Phone call... and checking /media/ === astro76 [n=james@unaffiliated/astro76] has joined #ubuntu [06:00] danieldan from sudo wifi-radar === kb0od1 [n=tim@dsl001-133-246.pdx1.dsl.speakeasy.net] has left #ubuntu [] === Weng_Lap [n=tony@c-68-34-34-199.hsd1.md.comcast.net] has joined #ubuntu [06:00] navid, if you want a paid prject, crossover is doing a lot of game-related work now [06:00] danieldan ? [06:00] I'll stick to wine for now, until i get hang of things around [06:01] yeah [06:01] b33r: that should be the one you have already [06:01] I'll look into that rockets thanks [06:01] I am about to complete a LAMP installation on my Ubuntu Feisty Desktop Box. I want the GUI which is why I am using the Desktop version instead of the Server version. I am following this tutorial. http://www.howtoforge.com/ubuntu_lamp_for_newbies I know that using the server edition not only can preinstall LAMP but it also takes a lot of security steps (i.e. closing certain ports). This tutorial only installs LAMP and does not cove [06:01] r any additional steps that might be needed for security. Is there anything you can suggest that I do? [06:01] goinzoism: yeah === Caplain [n=shane@adsl-75-45-224-90.dsl.sfldmi.sbcglobal.net] has joined #ubuntu [06:01] nickrud, 1 /usr/bin/gij-wrapper-4.1? [06:01] danieldan some cards don't support it.. what card you got ? === ultra [n=ultra@67-58-209-167.amtelecom.net] has joined #ubuntu [06:01] PinkFloyd: Actually, I'm running Firefox under sudo because I need my webmail client to be able to attach something in a root-only directory. [06:01] navid don't use the ubuntu wine repo which is dated, use the budgetdedicated repo mentioned in the ubuntu wiki doc === Geoffrey2 [n=jeffrey@c-76-98-226-136.hsd1.pa.comcast.net] has joined #ubuntu [06:01] hello again [06:01] b33r: no, a sec here [06:01] And I'm too lazy to copy it out. === B_166-ER-X [n=ghost@c207.134.132-45.clta.globetrotter.net] has joined #ubuntu [06:01] Yea thats what i got :) === gonzoism waves back at frogzoo because he always takes his frogs to the zoo [06:02] winehq has that currently for download [06:02] quick question, how to add repository [06:02] should there be anything in my /etc/ld.so.conf file? [06:02] ultra in the menus. [06:02] Gonzoism> Totally lost man, treat me like a dumb child. [06:03] (Not that children are dumb. Dumb + Child = me) [06:03] goinzoism: mmm Is a USB adapter "TP-LINK" the funny thing is that it detects the wirelles network but as if there wasn't any signal strength, and with a lock just next to it [06:03] ultra in synaptic, you can get to them in the settings menu. find it ? === gerber [n=gerber@190.56.5.118] has joined #ubuntu [06:03] JesterJAG i'm 3. are you calling me dumb ? [06:03] rockets: is there a way to convert it to something more usable, like ogg? [06:03] Hey guys, I need your opinion, I tried dual booting ubuntu with windows yesterday, and 3/4ths through the ubuntu install, it died (CD was faulty). I can boot a (working) ubuntu cd and access the NTFS partition, but there aren't any options for a guided install. I've tried doing a manual install (by creating two partitions), but my computer doesn't want to seem to boot. Any suggestions? [06:04] Gonzoism> Funny. Read my statement after the last. I didn't point it towards you, but the main channel. [06:04] JesterJAG is there a menu ? click it, then accessories, the command prompt. or terminal. that black box. [06:04] jafoo0: Super GRUB for the interim? === tehgooch [n=tehgooch@d216-232-191-166.bchsia.telus.net] has joined #ubuntu [06:04] super grub... i'll look into it, i've never heard of it.. [06:04] jafoo0: if it's a new comp, look at disabling mmu, if it's oldish, try 'acpi=no' [06:05] Gonzosim> Menu->Accessories-> WOW no command prompt!? [06:05] JesterJAG i'm just playing with you. i'm not 3. lol. i'd be like a typing wizard at age 3 or something [06:05] JesterJAG get the terminal open ? [06:05] Gonzoism> This is Xubuntu* [06:05] O_O there is someone on our roof, seriously === dudeicles [n=dudeicle@adsl-75-43-42-72.dsl.skt2ca.sbcglobal.net] has joined #ubuntu === astro76 [n=james@unaffiliated/astro76] has joined #ubuntu [06:05] scguy318: thanks, i'll try!! === morlenxus [n=morlenxu@e178011022.adsl.alicedsl.de] has joined #ubuntu === soothsayer [n=user@bas16-montreal02-1242357234.dsl.bell.ca] has joined #ubuntu [06:05] Gonzoism> Found terminal under System->Terminal. NOw open. [06:05] JesterJAG ok. i've never seen xubuntu. [06:05] b33r: you using u2 ? [06:05] JesterJAG ok. do this, ls /media/ [06:05] goinzoism: mmm Is a USB adapter "TP-LINK" the funny thing is that it detects the wirelles network but as if there wasn't any signal strength, and with a lock just next to it [06:06] nickrud, what's a "u2"? [06:06] Gonzoism> My problem is, Ubuntu wouldn't load. /bin/sh error. :( Had to use Xubuntu. :E === Tomcat_` [n=Tomcat@p54A1D107.dip.t-dialin.net] has joined #ubuntu [06:06] anyone know of any program that is able to conncet to frontpage extensions? === jedherzog is now known as maestroJed [06:06] b33r: java 6u2 [06:06] gonzoism> "No such file or directory [06:06] quit === Doc_Bio [n=chatzill@cpe-76-190-205-81.neo.res.rr.com] has joined #ubuntu [06:07] Gonzoism> ls just gives me "Desktop" === aandress [n=andress@lak-73-33.wohnheime.ruhr-uni-bochum.de] has left #ubuntu ["Verlassend"] [06:07] JesterJAG ok, lets mount it, sudo mount /dev/hda1 /mnt (unless its a laptop, then try sda1) === soothsayer [n=user@bas16-montreal02-1242357234.dsl.bell.ca] has left #ubuntu ["ERC] === du [n=tobias@e180022232.adsl.alicedsl.de] has joined #ubuntu [06:07] hi kids...got a noob question for someone willing [06:07] Gonsoism> Working on mounting. [06:07] nickrud, java version "1.6.0" [06:07] what the hell is the unix command for adding a computer account. === Jakyl [n=jakyl@71-34-245-42.eugn.qwest.net] has joined #ubuntu [06:07] doc_bio: adduser === Don64 [n=dpowers6@ip68-102-235-221.ks.ok.cox.net] has joined #ubuntu [06:07] b33r: that's the one in ubuntu .. [06:08] nickrud, yes === manubonelli [n=manuele@host118-53-dynamic.56-82-r.retail.telecomitalia.it] has joined #ubuntu === docmur [n=docmur@142.156.6.11] has joined #ubuntu === Prognatus__ [n=irc@147.80-202-51.nextgentel.com] has joined #ubuntu === Falstius [n=jeff@c-24-11-53-75.hsd1.mi.comcast.net] has left #ubuntu [] [06:08] b33r: that's the one you wanted? Not one of the later? [06:08] can someone help me configuring my wireless i really need help (its a USB adapter) [06:08] Okay I have 2 soundcards 1 on my TV tunner, 1 Sound Blaster [06:08] yea....and with what extensions and isn't the computer name supposed to have a $ somewhere? [06:08] Gonzoism> "can't find dev/hda1/mnt" [06:08] nickrud, do I have to update java to update the jre? :/ [06:08] the sound blaster alsa says is my 2nd card so not the default === revilodra1 [n=sexgod@220-253-25-50.VIC.netspace.net.au] has joined #ubuntu [06:08] JesterJAG there is a space between hda1 and /mnt [06:08] how do I set it to load the second card [06:09] how do i do a batch filename change? === Nicark [n=Nicark@adsl-067-034-139-198.sip.mco.bellsouth.net] has joined #ubuntu === kahrytan [n=kahrytan@pool-71-176-41-186.nrflva.east.verizon.net] has joined #ubuntu === long [n=long@222.214.74.145] has joined #ubuntu [06:09] can someone help me configuring my wireless i really need help (its a USB adapter) === dga [n=dga@adsl-67-121-231-43.dsl.chic01.pacbell.net] has joined #ubuntu [06:09] b33r: the last release of the java 1.6.0 was in december. That's in Ubuntu. There's technology previews, which I assumed you meant when you said latest. [06:09] Gonsoism>"Special device dev/hda1 does not exist" [06:09] how do i do a batch filename change? === jafoo00 [n=jafoo0@cpe-66-75-83-72.socal.res.rr.com] has joined #ubuntu [06:10] can someone help me configuring my wireless i really need help (its a USB adapter) [06:10] revilodra1, there is package in repo for it [06:10] danieldan: what do u need? [06:10] Gonsoim>This was so easy in ubuntu... Would it be easier to get Ubuntu loading past the /bin/sh error? [06:10] kahrytan: do u know what its called? === xoRock [n=xo@69.88.3.113] has joined #ubuntu [06:10] nickrud, I want this jre jre-6u2-linux-i586.bin [06:10] I dont remember it [06:10] but I know there is one === At0mic_P1 [n=arch_ato@65.7.4.98] has joined #ubuntu [06:11] so? adding computer in unix, useradd -?? $ right? [06:11] b33r: that's what I said, u2. Ok we're still on the same page, just bounced a bit [06:11] revilodra1 for i in $('WHATEVER_COMMAND_LISTS_THE_FILES_YOU_WANT'); do mv $i newname ; done you can use $i.newname to use $i for a base name. [06:11] kahrytan: renameutils? cos i installed that and i cant see where its gone? [06:11] JesterJAG did ya try sda1 too ? go ahead and try that === File13 [n=File13@adsl-66-139-218-30.dsl.rcsntx.swbell.net] has joined #ubuntu [06:11] nickrud, so what should I do know? lol [06:11] revildodral: problem is I just bought this thing... it recognizes the wireless network, but as if it didnt have any signal strength and with a lock next to it, i really dont know what to do [06:11] Gonsoism> Also, while your still helping me: Thank you for your help. === troopperi_ [n=antti@dsl-mlibrasgw1-febcc000-95.dhcp.inet.fi] has joined #ubuntu [06:12] b33r: one more sec [06:12] Gonzoism> Negative. Trying sda1 now. [06:12] gonzoism: so i cd to the folder then do the 'mv $i newname ? [06:12] nickrud, ok thanks for ur time ;d === Jakyl [n=jakyl@71-34-245-42.eugn.qwest.net] has joined #ubuntu [06:12] revilodra1, bulk rename and in add/remove [06:12] danieldan: Is it a secured network? When you try to connect to it does it prompt you for a key? [06:12] Gonzoism> Same error for sda1 [06:12] b33r: silly question. You did install the deb that jpkg made, right? [06:12] kahrytan: thanks! [06:12] nickrud, yes [06:12] JesterJAG ok. see me in the /query the pm ? === evri2 [n=evri2@85.108.108.140] has joined #ubuntu [06:13] revilodra1, I ran across it while looking througbh add/remove [06:13] nickrud, the make-jpkg jre-6u2-linux-i586.bin [06:13] then* [06:13] revilodra1, http://thunar.xfce.org/index.html === dudeicles [n=dudeicle@adsl-75-43-42-72.dsl.skt2ca.sbcglobal.net] has left #ubuntu ["Ex-Chat"] [06:13] Gonzoism> No and when I tried to query you, I was told there was a spam block.. Oh there you are now. [06:13] hey === loca|host [n=tux@196.203.53.221] has joined #ubuntu [06:13] can I email mark shuttleworth? [06:13] Gonzoism> When I type to you: "private messages from unregistered users are currently blocked due to spam problems, but you can always message a staffer. Please register! " [06:14] JesterJAG: You need to identify to nickserv to send pms .. with /msg nickserv identify [06:14] amidaniel: yeahits my router that has WEP key and I have it but nothing works [06:14] JesterJAG that is you [06:14] JesterJAG that is ok. [06:14] JesterJAG: Or, rather, register your nick with /msg nickserver register [06:14] jesterjag um. you got to find the hard drives in the computer. they will be labeled. [06:14] JesterJAG: /ns register pass i think [06:15] danieldan: "nothing works" ... what does it do when you select the network from network manager? [06:15] danieldan do you use iwconfig to set up the wireless, and then dhclient3 or dhcpcd to set up the ip and stuff ? [06:15] b33r: /usr/lib/j2re1.6-sun/bin/java [06:15] Gonzoism> Perhaps make a new IRC channel to treat as a PM? === ultra [n=ultra@67-58-209-167.amtelecom.net] has left #ubuntu [] === taime1 [n=pedro@ip68-102-157-78.ks.ok.cox.net] has joined #ubuntu === lullis [n=lullis@201.82.56.64] has joined #ubuntu [06:15] jesterjag ok /join #gonzoism [06:15] Gonzoism> Treat as /Query* [06:15] b33r: that's the one to choose [06:15] how do i get proper resolutions after installing the nvidia driver? [06:16] gonzoism: dhcp "that wrks in another laptop i have" === seuaniu [n=seuaniu@sub18-71.member.dsl-only.net] has joined #ubuntu [06:16] nickrud, but there isn't this option :/ [06:16] guys anyone has made this work? Vmware workstation/player and VirtualBox both installed in the same machine?? [06:16] amidaniel: and it jost says "conexion failed" [06:16] taimel, you got a LCD screen? [06:16] nope === dblackburn [n=dblackbu@71-208-229-36.hlrn.qwest.net] has joined #ubuntu [06:17] b33r: did you sudo dpkg -i on the deb that the make-jpkg created? [06:17] danieldan: Can you pls pastebin an iwconfig [06:17] ? === fsckr [n=rich@pool-71-100-42-63.tampfl.dsl-w.verizon.net] has joined #ubuntu [06:17] hi please explain pptp. please. [06:17] and scratch my head [06:17] Do you know your way around /etc/X11/xorg.conf ? [06:17] b33r: looking back I don't think I explicitly said to do that, sorry [06:17] yes === Adlai [n=leif@129.49.7.102] has joined #ubuntu [06:17] nickrud, no I didn't [06:17] amidaniel: ok.. can you send me the page to pastebin please i had it but dont really remember please send me a link [06:17] What resolution shows there? [06:17] pptp oh my god [06:18] b33r: there you go, I skipped a step. Sorry [06:18] I love protocols === trukkerz [n=darlin@ACC88969.ipt.aol.com] has left #ubuntu [] [06:18] b33r: it's in the same directory [06:18] !pastebin | danieldan [06:18] danieldan: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic) [06:18] it automaticaly ran the created file [06:18] geez, everything from 1600x1200 to 800x600 [06:18] after make-jpkg [06:18] b33r: no, it created a deb that you can then install. [06:19] ok let me try [06:19] What is the resolution that you want to work? Put that as the first option and restart the X server. Usually, that works. === phoenixz [n=sven@148.243.5.117] has joined #ubuntu === Kitar|st [i=Kitarist@BSN-77-249-31.dial-up.dsl.siol.net] has joined #Ubuntu === revilodra1 [n=sexgod@220-253-25-50.VIC.netspace.net.au] has left #ubuntu [] [06:19] no, i have done all of this === cameronw [n=cameronw@123-100-99-208.ubs.maxnet.co.nz] has joined #ubuntu [06:20] nickrud, this file sun-j2re1.6_1.6.0+update2_i386.deb? === ivs209 [n=ivs209@r195067.res.Lehigh.EDU] has joined #ubuntu [06:20] b33r: yes [06:20] i remember it having something to do with the order i installed the driver and whence i reconfigured x [06:20] Did you installed the driver, enabled it at Administration-> Restricted Driver Manager ? [06:20] I forgot who helped me and lead me to getting supergrub, but looks like i can boot windows again :D!!! === donkeegan [n=den@220.226.45.33] has joined #ubuntu [06:20] (THANKS!) [06:20] yeah [06:20] amidaniel: http://paste.ubuntu-nl.org/36398/ [06:20] jafoo00: np [06:21] ahh yes.. scguy.. thanks!! [06:21] nickrud, Java(TM) SE Runtime Environment (build 1.6.0_02-b05) :D [06:21] b33r: sorry about skipping that step, probably caused you more sweat than necessary [06:21] I'm sorry I can't help you more. I did have some trouble with it, but I fixed by setting the resolution in xorg.conf === Weng_Lap [n=tony@c-68-34-34-199.hsd1.md.comcast.net] has joined #ubuntu [06:21] nickrud, lol no problem thanks <3 === joharbach [n=joharbac@modemcable093.47-131-66.mc.videotron.ca] has joined #ubuntu === a4k7 [n=halim@M2175P025.adsl.highway.telekom.at] has joined #ubuntu [06:22] I still need some help to set up sound correctly, though. :) [06:22] danieldan: ermkay .. can you click on the network manager applet and select "Manual configuration" from the menu === a4k7 [n=halim@M2175P025.adsl.highway.telekom.at] has left #ubuntu ["Ex-Chat"] === pro_zack [n=zack@154.5.223.60] has joined #ubuntu === sparr [n=sparr@c-76-22-236-187.hsd1.tn.comcast.net] has joined #ubuntu [06:22] b33r: yw. And, this new java fits properly into your system, and can be uninstalled cleanly when a new one comes up. And, if it's buggy, you can update-alternative to an older one in seconds. [06:22] how do i revert to an older version of wine?? sorry if a newbie question [06:22] amidaniel: yes [06:23] nickrud, thanks got it [06:23] i have 0.9.44 and want to go back to 0.9.43 [06:23] And I'm also using a mobo with a nVidia chipset. I am out of ideas to make my mic work in Ubuntu X86_64. [06:23] Distort: uninstall the wine package, download the older package from http://wine.budgetdedicated.com/ [06:23] DIstort: install with sudo dpkg -i [06:23] danieldan: select eth1 from the list and hit preferences === gehacktes [n=gehackte@p3EE27F34.dip.t-dialin.net] has joined #ubuntu [06:23] Not to mention that the sound server breaks from time to time, and I have to restart. === underdog5004 [n=matthew@adsl-76-199-99-75.dsl.pltn13.sbcglobal.net] has joined #ubuntu [06:23] huhu === bodhizazen [n=bodhi@fluxbuntu/documentation/bodhizazen] has joined #ubuntu [06:23] restart Alsa. === Noldoaran [n=robb@adsl-69-234-30-25.dsl.irvnca.pacbell.net] has joined #ubuntu === pro_zack [n=zack@154.5.223.60] has left #ubuntu ["Ex-Chat"] === thully [n=thully@southquad-187-17.reshall.umich.edu] has joined #ubuntu [06:25] weiss jemand vo ich bei ubuntu die desktp icon grsse ndern kann? eins von mir zb ist mega gross das andere sau klein das sieht recht lustig aus ^ === WONToN [n=wonton@67-150-218-100.sttl.mdsg-pacwest.com] has joined #ubuntu [06:25] amidaniel: ok done then?? === cori_ [n=cori@cpe-70-113-215-55.austin.res.rr.com] has joined #ubuntu === joharbach [n=joharbac@modemcable093.47-131-66.mc.videotron.ca] has left #ubuntu ["Ex-Chat"] [06:26] lullis, Should have gotten intel chipset? === zenmonk [n=keegan@ip-134-53-166-115.dhcp.muohio.edu] has joined #ubuntu [06:26] gehacktes: Das kannst du bearbeiten, glaub ich, under System / Preferences / Theme [06:26] how do you start a stopped process again? [06:26] danieldan: Is roaming mode selected? === |muelli| [n=Muelli@e177237208.adsl.alicedsl.de] has joined #ubuntu [06:26] for that device^ === jesus [n=jesus@189.130.125.12] has joined #ubuntu === ir8 [n=picsandp@58.173.65.141] has joined #ubuntu [06:27] having trouble with compiz-fusion . looking for help === gehacktes [n=gehackte@p3EE27F34.dip.t-dialin.net] has left #ubuntu ["Verlassend"] [06:27] amidaniel: actually no!... i configured it just as I did before in another laptop... === peeps_work [n=peepsalo@cpe-70-112-16-13.austin.res.rr.com] has joined #ubuntu [06:27] kahrytan, let's not get into a "my gear is better than your gear" type of discussion, ok? [06:28] danieldan: Oh, okay, try enabling that and then restart nm-applet ... I find that's typically a must for wireless cards [06:28] Unless you're only going to be on one network [06:28] zenmonk: stopped with ctrl-Z ? [06:28] Adlai: yes === tyoc [n=ubuntu@189.181.148.252] has joined #ubuntu [06:28] bg to restart it in the background, fg to restart it in the foreground [06:28] I bet that if I installed my old copy of windows XP, I wouldn't have any issues. :P === RogerPO [i=nada@201-89-146-134.smace701.dsl.brasiltelecom.net.br] has joined #ubuntu === Kr0ntab [n=Kr0ntab@unaffiliated/Kr0ntab] has joined #Ubuntu [06:29] amidaniel: ammm how do i do that??? === stunatra [n=stu@158.sub-75-212-203.myvzw.com] has joined #ubuntu === qazibasit [n=qazibasi@116.71.19.62] has joined #ubuntu [06:29] Adlai: thanks :) [06:29] lullis: apart from the issue of having windows XP on your computer [06:29] zenmonk: sure [06:29] nickrud, one more thing how do I add it in java control panel? it's still shows the 1.6.0 there === fender__ [n=fender@mail.dropletsap.com] has joined #ubuntu [06:29] Adlai: you call it by pid, right? [06:29] zenmonk: no, just type (b|f)g [06:30] maybe you can specify the pid, I've never tried [06:30] Adlai: but what if you had more than one task stopped? [06:30] Adlai: yeah. But with Emacs + cygwin + Firefox, I had a good life. [06:30] zenmonk: you probably can, check the man pages or something [06:31] Thing is, it is a new computer and I didn't use anything that was Windows-specific, so I thought about going back to a linux-only machine. === dudeicles [n=dudeicle@adsl-75-43-42-72.dsl.skt2ca.sbcglobal.net] has joined #ubuntu [06:31] danieldan: From preferences on eth1 under nm ... it should restart automatically once you apply the changes, but if it doesn't, nuke it from top or system monitor === AutumnCat [n=AutumnCa@59.41.108.142] has joined #ubuntu === SilentDis [n=alex@wdwi0pool0-a169.wi.tds.net] has joined #ubuntu [06:32] hello :) [06:32] amidaniel: ok ill try and ill beback in a sec [06:32] thanks === goldbond [n=walsh@74-142-8-169.dhcp.insightbb.com] has joined #ubuntu [06:32] anyone know a good pppd/EVDO client for Gnome? knet looks like it'll suffice for me under KDE, but the parents run gnome, and it needs to be simple for them hehe === zenmonk [n=keegan@ip-134-53-166-115.dhcp.muohio.edu] has left #ubuntu ["Leaving"] === Frogzoo_ [n=Frogzoo@202.155.165.25] has joined #ubuntu [06:33] b33r: it says build 1.6.0_02-b05 on mine === xinabo [n=xinabo@222.244.15.102] has joined #ubuntu [06:34] nickrud, mine doesn't ;o === zenmonk [n=keegan@ip-134-53-166-115.dhcp.muohio.edu] has joined #ubuntu [06:34] #archlinux [06:34] oops, sry [06:35] b33r: edit the launcher to launch /usr/lib/jvm/java-6-sun-1.6.0.02/bin/ControlPanel [06:35] nickrud, do u mind telling me how to edit it? :$ [06:36] b33r: right click the application bar === LDS_Trooper [n=LDS_Troo@S010600111a3f762b.ed.shawcable.net] has joined #ubuntu === Coole^ [n=justin@71-212-52-231.tukw.qwest.net] has joined #ubuntu [06:36] y [06:36] How can I modify the ALT+RMB shortcut? [06:36] any pros on cheese? i need to know how to get it to use /dev/video1 not /dev/video0 === phaedra [n=phaedra@24-177-233-102.dhcp.gnvl.sc.charter.com] has joined #ubuntu === zenmonk [n=keegan@ip-134-53-166-115.dhcp.muohio.edu] has left #ubuntu [] === warbler [n=warbler@202.134.248.211] has joined #ubuntu === urthmover [n=me@adsl-68-94-224-35.dsl.rcsntx.swbell.net] has joined #ubuntu === ultra [n=ultra@67-58-203-213.amtelecom.net] has joined #ubuntu [06:37] dfgas: symlink? [06:38] hi [06:38] me again === RenatoSilva [n=renato@200191182052-dial-user-ECP.acessonet.com.br] has joined #ubuntu [06:38] dfgas: /dev/video0 -> /dev/video1 [06:38] gonzoism: are you still there? [06:38] anyone with any suggestions for a good pppd gui client for the Gnome desktop? (i'm primarily a KDE user myself, gotta set something up for the parents, they use gnome) === At0mic_PC [n=arch_ato@65.7.4.98] has joined #ubuntu [06:39] How do I remove nautilus' splash screen that appears at logon? [06:39] How do I remove nautilus' splash screen that appears at logon? [06:39] gppp? [06:39] scguy: HELLLL YEAHH!!! repaired the MBR and activated the boot partition. w00t w00t! [06:39] dfgas: if there is no /dev/video0, you can always just sudo ln -s /dev/video1 /dev/video0 === Evanlec [n=ubuntu@c-75-67-237-157.hsd1.nh.comcast.net] has joined #ubuntu [06:39] '/bin/sh: can't access tty; job control turned off' anyone know what i can do about this? === jsonder [n=Jsonder@ip68-231-151-57.tc.ph.cox.net] has joined #ubuntu [06:39] How can I modify the ALT+RMB shortcut? [06:39] jafoo00: :D [06:39] how do i tell what filesystem a partition has via terminal?? [06:40] cschauer: try booting with all_generic_ide? === emile [n=emile@cp665411-a.dbsch1.nb.home.nl] has joined #ubuntu [06:40] Evanlec: fdisk -l? === ToddEDM2 [n=Toddedm@S0106001310a006c0.ed.shawcable.net] has joined #ubuntu === snarf [n=snarf@ip70-162-201-141.ph.ph.cox.net] has joined #ubuntu [06:40] SilentDis, scguy318, there is a video0, it is my tv card [06:40] scguy318: sorry but, how do i do that? [06:40] scguy318, okay, i did that, so what does "Linux" mean [06:40] is that ext2 or ext3? [06:40] How do I remove nautilus' splash screen that appears at logon? [06:40] nomasteryoda: thanks, missed it there for a moment, checking it out now... [06:41] I already did it before but don't remember in no way [06:41] How do I remove nautilus' splash screen that appears at logon? [06:41] dfgas: doh, not sure then, haven't played with any vid editing in linux yet, sorry [06:41] hey guys,, is there a way i can reinstall grub?... i tried the link that the bot gave me.... now grub loads, but when i select ubuntu, i get error 17 [06:41] cschauer: using LiveCD? === gogeta [n=ssj4goko@user-12-191-209-134.irvineonline.net] has joined #ubuntu [06:41] scguy318 installed with cd, cd is out [06:41] ? [06:41] cschauer: you could go into your menu.1st and edit boot options [06:42] scguy318, in fdisk, it only tells me my filesystem is "Linux" [06:42] cschauer: i forgot wut keys u press in GRUB to let u enter boot options [06:42] Evanlec: probably ext2/3 i guess [06:42] evanlec whats up [06:42] hi === phaedra_ [n=phaedra@24-177-233-102.dhcp.gnvl.sc.charter.com] has joined #ubuntu === Deucalion1 [n=deucalio@rrcs-24-39-255-45.nys.biz.rr.com] has joined #ubuntu [06:42] ToddEDM2: does error 17 have a description? [06:42] just trying to figure out if i formatted my partition wrong, using ext2 instead of ext3 [06:42] How do I remove nautilus' splash screen that appears at logon? [06:42] How do I remove nautilus' splash screen that appears at logon? [06:42] no RenatoSilva [06:42] cschauer e lets you edit === noob_ [n=noob@pc-45-113-44-190.cm.vtr.net] has joined #ubuntu === mrgigabyte [n=Mr_Gigab@rrcs-67-52-84-179.west.biz.rr.com] has joined #ubuntu [06:43] thats my '/ [06:43] renato you mean the auto login? [06:43] RenatoSilva: you should wait a bit for someone to read your question and respond, before you ask again [06:43] nomasteryoda: appears they've renamed it to 'gnome-ppp'. that works though, i should be able to bang away at it and make it go. thanks :) [06:43] giving more information about your current situation also helps [06:43] Adlai: ask u please :D [06:43] gogeta, any ideas? [06:43] nickrud, after I edit it do I simply close? [06:43] b33r: yes [06:44] evanlec, is the partition mounted? [06:44] SilentDis, np... sometimes helps to use wvdial to get a good .conf file to work from [06:44] so, i am trying to get windows on a partition, for my tablet pc, and i have it formated to ntfs, but windows does not detect my HDD (laptop obviously) [06:44] WONToN, no, but it could be [06:44] you can boot the cd go all the way to the partatner part slect maul and see if its ext3 === mindtrick_ [n=bora@85.99.9.138] has joined #ubuntu [06:44] type mount [06:44] by defult it is ext3 [06:44] SilentDis, i use wvdial with a verizon evdo card on this laptop in Ubuntu... works perfectly [06:44] nickrud, I edit the command: /usr/lib/j2re1.6-sun/bin/ControlPanel? === sudhanshu [n=sudhansh@122.167.101.125] has joined #ubuntu [06:44] because it's not working ;/ === mycroftiv [n=hagbard@mdsnwikwbas08-pool4-a103.mdsnwikw.tds.net] has joined #ubuntu [06:44] Renatosilva: there's an option in gconf-editor to change that - apps-gnome-sessions [06:45] rento what you mean disable the login [06:45] b33r: /usr/lib/jvm/java-6-sun-1.6.0.02/bin/ControlPanel [06:45] How can I modify the ALT+RMB shortcut? === rachidian [n=salamand@216-26-0-20-user.feather.net] has joined #ubuntu [06:45] ToddEDM2: I re-installed grub on Monday by running "grub-install --root-directory=/mysavedmenu.lst /dev/sda2" === rachidian [n=salamand@216-26-0-20-user.feather.net] has left #ubuntu ["Ex-Chat"] [06:45] he can pass init 3 to the boot loader and it whiont start gdm at all [06:45] rento: auto-login? [06:45] WONToN, okay its mounted [06:45] nickrud, that's where mine installed [06:45] as, ? [06:45] nickrud, it's not in jvm I checked :/ [06:46] WONToN, is mounted as /target === justinwray [n=justinwr@c-68-34-224-91.hsd1.md.comcast.net] has joined #ubuntu === LDS_Trooper [n=LDS_Troo@S010600111a3f762b.ed.shawcable.net] has left #ubuntu ["Leaving"] [06:46] b33r, ls /usr/lib/jvm: [06:46] mount will show a bunch of junk about the mounted disk (fs type is one of them) [06:46] java-6-sun java-6-sun-1.6.0.00 [06:47] oh, i just did sudo mount /target [06:47] but it didnt say anything [06:47] just mount i think === Nutubuntu [n=jn@c-24-23-155-42.hsd1.ca.comcast.net] has joined #ubuntu === flodine [n=flodine@c-24-4-181-89.hsd1.ca.comcast.net] has joined #ubuntu === toto8843 [n=amathys@117-67.3-85.cust.bluewin.ch] has joined #ubuntu [06:47] aha!~ [06:47] Evanlec, they meant just the command "mount" with no arguments... [06:47] thank you === Megaqwerty [n=megaqwer@unaffiliated/megaqwerty] has joined #ubuntu [06:48] mount can auto-detect fs type I think [06:48] my next question, it appears i formatted my / as ext2, is it worth reformatting/installing to put ext3? [06:48] evanlec, fyi, if you use mount -v it will be verbose about what it is doing [06:48] gogeta: no! [06:48] Evanlec: yes [06:48] Evanlec: you don't have to reformat to do it [06:48] hey people, I still getting GRUB error 21, and I have tried the 2 methods in https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows thought I dont know of a way to make a "proof" [06:48] no? [06:48] Evanlec: you just need to add a journal. [06:49] i can keep all data? === allbert [n=allberto@124.82.22.168] has joined #ubuntu [06:49] Evanlec: Yep [06:49] well rento what you whant [06:49] sweet, how? lol [06:49] Evanlec: I don't remember the command...hold on [06:49] kk === linuxbeast [n=chris@208-117-26-76.block5.gvtc.com] has joined #ubuntu [06:49] can someone tell how to replace the ubuntu logo back to gnome foot in the taskbar please. === taime1 [n=pedro@ip68-102-157-78.ks.ok.cox.net] has joined #ubuntu === linux_user400354 [n=chris@208-117-26-76.block5.gvtc.com] has joined #ubuntu [06:49] to change its theme? [06:49] gogeta: I've customized ubuntu's visual to look blue, and that splash screen from nautilus right after logon is annoying [06:49] ahhh [06:49] i installed an nvidia driver, and i cant get my higher resolutions back. what did i do wrong? [06:49] !menuicon | flodine [06:49] Sorry, I don't know anything about menuicon - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [06:49] taime1: sudo nvidia-settings? [06:49] hrm [06:49] !menulogo [06:49] Sorry, I don't know anything about menulogo - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [06:50] b33r: yet you see the update 2 when you version java [06:50] havent used that yet [06:50] tonyyarusso [06:50] yes [06:50] nickrud, worked when I added a new item [06:50] nickrud, but kinda slow === slken [n=User@adsl-75-31-40-46.dsl.pltn13.sbcglobal.net] has joined #ubuntu [06:50] you need to install a theme of blue then [06:50] taime1: sudo nvidia-settings is prob worth a shot [06:50] taimel: was it the real nvidia driver with the nvidia settings manager? [06:50] to change that [06:50] b33r: added a new item, new menu item? [06:50] nickrud, yeah [06:51] i have wine installed, well it ifnished installing but i cant find it [06:51] isnt it suppose to be in home/user/ as .wine ? [06:51] nickrud, but when I change the existing one it didn't work [06:51] Firefox or Swiftweasel repeatedly segfault for me. For SW, strace shows it's looking for something in .mozilla/init.d/ at the end. That directory doesn't exist. What's going on? (Or more likely, how can I figure this out?) [06:51] navid: ~/.wine [06:51] warbler: gotcha!!!!!!! [06:51] Evanlec: http://www.math.ucla.edu/~jimc/documents/convert2ext3.html [06:51] no such file or directory [06:51] hey guys ... can somebody help me. i got ubuntu server running. enabled remote desktop connections from outside PCs ... but when i tried to connect ... i'm stopped ... how can i open the firewall on the port? [06:51] flodine: http://ubuntuforums.org/showthread.php?t=167658 [06:51] Sorry, ~/.mozilla etc [06:51] b33r: odd. Probably worth having both, anyway [06:51] navid: u do winecfg first? === noob_ [n=noob@pc-45-113-44-190.cm.vtr.net] has joined #ubuntu [06:52] Taimel: scguy has a good suggestion.. the other is to manually edit /etc/X11/xorg.conf to look like your backup version of xorg.conf in the video settings section [06:52] winecfg [06:52] Not sure [06:52] tonyyarusso that works only for the old ubuntu === Matthai [n=Matthai@kovacic-m.fdv.uni-lj.si] has joined #ubuntu [06:52] no i didnt === RamiKassab [n=RamiKass@c-67-171-189-167.hsd1.or.comcast.net] has joined #ubuntu === wers [n=allanc@202.137.21.200] has joined #ubuntu [06:53] Evanlec: second source: http://www.troubleshooters.com/linux/ext2toext3.htm#_two2three [06:53] flodine: how so? [06:53] taime1: http://ubuntuforums.org/showpost.php?p=1388643&postcount=14 ?????? [06:53] RenatoSilva: lol :) === Phrozen_One_ [n=Root@pool-72-65-101-244.ptldme.east.verizon.net] has joined #ubuntu [06:53] nickrud, should I set java parameters to -Xmx256M? [06:53] Evanlec: go with the second one, it looks easier to follow [06:53] Megaqwerty, thank you vry much === RoninTao [n=RoninTao@c-75-73-30-200.hsd1.mn.comcast.net] has joined #ubuntu [06:54] Evanlec: happy to oblige [06:54] tonyyarusso look at the date and have you tried it === synacktion [n=synackti@c-75-71-233-190.hsd1.co.comcast.net] has joined #ubuntu [06:54] can somebody help me with my remote desktop question up above? [06:54] people, hre is my thread with a more complete explanation about my problem: http://ubuntuforums.org/showthread.php?t=543065 [06:54] im downloading: winecfg-may-final release, should fix it [06:54] b33r: That's gonna depend on your needs, or the needs of what you run. I'm not a java expert. [06:54] flodine: Nothing about those instructions should be specific. What's the problem? === donmesw [n=donmesw@adsl-69-234-157-67.dsl.irvnca.pacbell.net] has joined #ubuntu [06:55] whats the quickest way to get winecfg, [06:55] nickrud, ok thanks for your help [06:55] tonyyarusso i just want the old gnome foot print [06:55] b33r: It depends upon what you're running .. if you're running an app that needs 256M of memory, then by all means [06:55] b33r: luck. Check the game site, I'm sure someone has racked java hard to find the right settings ;) [06:55] slken: I believe sudo iptables -A INPUT -p tcp --dport 3101 -j ACCEPT is the command, substitute 3101 for the port you want to open [06:55] Most java apps run fine on far less, though [06:55] slken ubutu has no firewall to open [06:55] flodine: I know. [06:55] gogeta: ubuntu does have a firewall [06:55] sence when [06:55] gogeta: for quite some time [06:55] tonyyarusso so the two was to do it here whats the best way [06:55] !firewall | gogeta [06:55] gogeta: Ubuntu, like any other linux distribution, has firewall capabilities built-in. The firewall is managed using the 'iptables' command (see https://help.ubuntu.com/community/IptablesHowTo), or GUI applications such as Firestarter (Gnome) or Guarddog (KDE). [06:56] the old one didnt [06:56] warbler: thank u very much!!! [06:56] slken: It's had it since at least Dapper Drake [06:56] nickrud, lol dude I asked for support and clearly said I'm on ubuntu with firefox they answered with IE help ;D [06:56] gogeta: Linux has always had firewalling, afaik. Definitely Ubuntu always has. [06:56] ahhh [06:56] lol. === renato [n=renato@201.78.231.77] has joined #ubuntu [06:56] ubuntu didnt for a wile [06:56] warbler: gconf-editor is the only place where we can config this? === Nectr0n [n=dig3n@c-76-23-245-15.hsd1.ct.comcast.net] has joined #ubuntu [06:56] tonyyarusso: That's news to me [06:56] b33r: about 1% of the hits on my web sites come from linux [06:57] renato: hi xar [06:57] hello all [06:57] lol .... i would think it does ... how can i vnc into my ubuntu box? [06:57] amidaniel: it's right there in the kernel - pretty much how things work [06:57] it should be open === xfiles_ken [n=ken-fire@58.54.144.105] has joined #ubuntu [06:57] nickrud, O.o what site? :P [06:57] gogeta: it probably did and you just didn't notice :-\ === taime1 [n=pedro@ip68-102-157-78.ks.ok.cox.net] has joined #ubuntu [06:57] sites* [06:57] i have no problem using vnc on my frends kubuntu setup === Phydoux [n=Phydoux@dpc674763221.direcpc.com] has joined #ubuntu [06:57] tonyyarusso: Early versions of ubuntu surely didn't have a built-in firewall though === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has joined #ubuntu [06:57] b33r: but you'd think they would have heard of firefox by now [06:58] amidaniel: sure they did - why do you think not? [06:58] slken: you need to go to System>Preferences>Remote Desktop [06:58] what vnc you using === amidaniel murmurs something about http://www.linux.com/articles/55319 === timmyd [n=timmy@75.139.139.49] has joined #ubuntu [06:58] i cant get a resolution higher than 800x600 after installing nvidia driver. i have used nvidia-settings, but still, nothing. what am i doing wrong? [06:59] gogeta ... realvnc ... i connected in ... but i got a black screen! === nickrud has always thought zonker was an idiot [06:59] you can manually modify /etc/X11/xorg.conf and add resolutions [06:59] the resolutions are there [06:59] so connecting no display [06:59] but its not making use of them [06:59] slken: I've had that problem before...I'll try to see how I fixed it [06:59] amidaniel, "Technically speaking, Ubuntu does include a firewall " -- from that link [06:59] taimel: can you post your xorg.conf? [07:00] in realvnc dont you need to set the display [07:00] so 1.1.1.1/1 [07:00] i just uninstalled the driver === Parisi [i=Parisi@pool-71-164-67-4.albyny.east.verizon.net] has joined #ubuntu [07:00] i can reinstall and be back === t4k3r0n [n=t4k3r0n@189.174.137.39] has joined #ubuntu === delskorch [n=delskorc@d14-69-22-107.try.wideopenwest.com] has left #ubuntu [] [07:00] hrm .... [07:00] amidaniel: That's a GUI firewall management interface only. The firewall itself was always there. === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has joined #ubuntu === t4k3r0n [n=t4k3r0n@189.174.137.39] has left #ubuntu ["Saliendo"] === RenatoSilva [n=renato@200191182052-dial-user-ECP.acessonet.com.br] has left #ubuntu [] === b33r is now known as b33r- [07:01] Hrm .. perhaps. I just recall a hubhub about earlier ubuntus not having any firewall built in === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has left #ubuntu [] [07:01] That's crazy talk. [07:01] But anyway .. I'm off to hop in the hot tub :D ... bbiab [07:01] Maybe someone misunderstood what a firewall is, and declared their (mis)understanding in print. Happens... [07:01] gogeta: the syntax is ipaddress:0 or ipaddress:1 isn't it? [07:01] Could be === amidaniel is now known as AmiDaniel_away [07:02] oh lol === Sam_Wesin [n=null@pool-71-107-19-185.lsanca.dsl-w.verizon.net] has joined #ubuntu [07:02] Hot tub sounds good :) wish I had one [07:02] ok [07:02] 1.1.1.1:1 [07:02] happy [07:02] LOL === lofl [n=reZo@124-197-24-170.callplus.net.nz] has joined #ubuntu === Juchipilo [n=Juchipil@cpe-76-87-49-183.socal.res.rr.com] has joined #ubuntu === uglyman [n=uglyman@21.212.95.219.cbj02-home.tm.net.my] has joined #ubuntu === Kr0ntab [n=Kr0ntab@unaffiliated/Kr0ntab] has joined #Ubuntu [07:02] and yes ir is [07:02] been using tight vnc to mutch [07:02] just need ip [07:03] !enter | gogeta [07:03] gogeta: Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation! [07:03] taime1: sudo dpkg-reconfigure xserver-xorg? [07:03] that has got to be the most typed command in this channel. :) === gonzoism [n=joe@tx-71-2-126-75.dhcp.embarqhsd.net] has left #ubuntu [] [07:04] lol === Frogzoo [n=Frogzoo@202.155.165.25] has joined #ubuntu [07:04] '/bin/sh: can't access tty; job control turned off' [07:04] on generic and recovery mode === stmiller [n=stmiller@71-9-142-123.dhcp.mdfd.or.charter.com] has joined #ubuntu [07:04] fresh install === Frogzoo [n=Frogzoo@202.155.165.25] has joined #ubuntu [07:04] slken: sorry, I can't recall what I did to fix it. It's been a year since I had the problem [07:05] slken well i use tight vnc no issues maybe you can try that === warnet [n=warnet@125.164.72.110] has joined #ubuntu === jimmacdonald [n=jim@138-212-223-66.gci.net] has joined #ubuntu [07:05] hay semua [07:06] hi guys. I was wondering, do you guys happen to know of a version of zend optimizer that works with Feisty for ppc ? === gvsa123 [n=girard@125.60.241.233] has joined #ubuntu [07:06] wtf is zend optimizer [07:06] sounds useless [07:07] zend optimizer ... ? Sound like it costs money === taime1 [n=pedro@ip68-102-157-78.ks.ok.cox.net] has joined #ubuntu [07:07] no, it's free [07:07] wtf is it [07:07] http://www.zend.com/products/zend_optimizer/?engine=google&cmpg=optimizer&k_id=zend_optimizer [07:07] gogeta: please be polite. === peeps_work [n=peepsalo@cpe-70-112-16-13.austin.res.rr.com] has joined #ubuntu [07:07] that waz [07:07] LOl [07:07] The Zend Optimizer is a free application that runs the files encoded by the Zend Guard, while enhancing the performance of PHP applications. === grndslm [n=grndslm@24-116-87-97.cpe.cableone.net] has joined #ubuntu [07:08] ? === grndslm_ [n=grndslm@24-116-87-97.cpe.cableone.net] has joined #ubuntu [07:08] I think someone mentioned an older version of this zend app existed for PPC Linux. [07:08] been searching for hours for one that works w/ php-5.2.1 and ppc feisty === cyphase [n=cyphase@c-71-198-55-219.hsd1.ca.comcast.net] has joined #ubuntu [07:08] jonli447_: is it in the ubuntu repositories? [07:08] Why would Swiftweasel (Firefox) be trying to open /home/my-home-dir/.mozilla/swiftweasel/init.d ... and crash when it can't? [07:08] yeah, the latest one I coulf find is 3.0.1, and only supports php-5.1.x === slken [n=User@adsl-75-31-40-46.dsl.pltn13.sbcglobal.net] has left #ubuntu [] [07:09] no, I don't believe it's in the repo [07:09] why even bother with it [07:09] the zend memory engine is part of php itself [07:09] because I have an application that is encoded w/ zend [07:09] jonli447_: I was going to say that if it's in the repo but i386, you could build it from source using the ubuntu build environment === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has joined #ubuntu [07:09] and my server is a ppc box running fiesty, gogata :-) [07:10] Weird. Zend supports Solaris, OS X PPC, FreeBSD, AIX, everything but PowerPC Linux is not listed. === tf [n=ben@c-69-242-148-81.hsd1.mo.comcast.net] has joined #ubuntu [07:10] yeah, and it's closed source unfortunately === jernster [n=jernster@ip68-228-215-239.ph.ph.cox.net] has joined #ubuntu [07:10] jonli447_: ah, therein lies the problem :( [07:10] Hmm I thought They stopped supporting PPC in Feisty? Wheres the Repo? [07:10] is there a better PDF application for gnome? [07:10] gvsa123, better than what? [07:11] gvsa123: evince? [07:11] Nutubuntu: than the one that's preinstalled [07:11] I guess zend decided to drop linux ppc support because Apple switched to Intell [07:11] Megaqwerty: that't what's installed by default right? [07:11] was hoping someone here might have installed it :-) [07:11] gvsa123: yeah [07:11] mrgigabyte : still Ubuntu for powerpc https://wiki.ubuntu.com/PowerPCDownloads [07:11] gvsa123, better than the one that's preinstalled to do what? read them? create them? what? [07:11] mrgigabyte: Its no longer officially supported, community still supports it. cdimages.ubuntu.com has CDs [07:11] er, cdimage [07:11] stmiller: TYVM [07:11] n/m === weazzle [n=weazzle@c-68-35-27-178.hsd1.nm.comcast.net] has left #ubuntu ["Leaving"] [07:12] Megaqwerty: more options like annotation tools, viewing bookmarks, === francis [n=francis@203.197.77.37.static.vsnl.net.in] has joined #ubuntu === pyrak [n=pyrak@ip68-109-193-64.pv.oc.cox.net] has joined #ubuntu === jzl_ [n=jzl@static3-2-rb.spt.centurytel.net] has joined #ubuntu [07:12] omg i'm kinda embarrassed to say this... but vista has exceeded my expectations... (albeit they were very low ones) [07:12] Megaqwerty: ay... they're called index... pffft [07:12] gvsa123: I don't know. Evince has always worked fine for me...and on the rare occasion it doesn't I have kpdf installed (it will run in gnome) === tuna-fish [n=tuna@tunamasiina.kortex.jyu.fi] has joined #ubuntu [07:13] Megaqwerty: more features in kpdf? [07:13] Did someone drop the "V" Bomb? === bourne [n=djzn@201.46.42.98] has joined #ubuntu [07:13] gvsa123: iirc, yep === xinabo [n=xinabo@222.244.15.102] has joined #ubuntu [07:13] Megaqwerty: iirc? === sindre [n=sindre@ti221110a081-7570.bb.online.no] has joined #ubuntu [07:13] gvsa123: if I remember correctly [07:13] gvsa: if I recall correctly [07:14] oh... i have to get used to the irc jargon [07:14] sorry [07:14] gvsa123: It's okay we all had to learn it at some point ;) [07:14] hi, how do I make audacious open all MP3 files instead of Music Box.... setting audacious by default? === jganetsk [n=jganetsk@207-237-65-63.c3-0.avec-ubr12.nyr-avec.ny.cable.rcn.com] has joined #ubuntu [07:14] bourne: right click an mp3 file and go to properties. [07:14] Megaqwerty: i know... good thing xchat automatically connects to #ubuntu... didn't even know how to that before... lol [07:14] bourne: the option is in one of the tabs...can't remember which === KurtKraut [n=ktk@unaffiliated/kurtkraut] has joined #ubuntu [07:15] Thanks thanks... [07:15] oh ok [07:15] I just got it... === george [n=george@12.178.97.27] has joined #ubuntu [07:15] Open With... (selection) === george [n=george@12.178.97.27] has left #ubuntu ["Leaving"] === fujin_ [n=aj@unaffiliated/fujin] has joined #ubuntu === _Smash_ [n=smash@pD95FDF03.dip.t-dialin.net] has joined #ubuntu === george [n=george@12.178.97.27] has joined #ubuntu [07:16] has anyone been able to get Beryl to work with an ATI Radeon XPRESS 200M card? [07:16] george: yes... thru Xgl [07:16] george: what KurtKraut said [07:16] KurtKraut, did you follow a specific how-to? === Nectr0n [n=dig3n@c-76-23-245-15.hsd1.ct.comcast.net] has joined #ubuntu === _vortex [i=ZXSfwh6d@kritikal.v-o-r-t-e-x.net] has joined #ubuntu [07:17] george: I can't remember... but I found one that seems correct to me === user28 [n=user28@222.124.207.110] has joined #ubuntu === ericx [n=jxtadev@125.120.98.194] has joined #ubuntu [07:17] hai.......... [07:17] might you have it saved in your bookmarks? [07:17] I searched google for nearly a half hour. [07:17] george: I'm searching for you right now [07:18] thank you === danielronin [n=danielro@24-216-186-158.dhcp.stls.mo.charter.com] has joined #ubuntu [07:18] george: these might help http://help.ubuntu.com/community/CompositeManager [07:18] I'm trying to build an updated version of gnash, and during configure, I'm seeing a message that my version of libcurl doesn't support the RTMP protocol...anyone know how to provide that support? [07:18] Anyone know howto configure snmptrapd? [07:18] george: do you have the proprietary ATI river running ? [07:18] I'm not sure. [07:18] glxinfo|grep vendor? I'm assuming? [07:19] george: yeah prob === fujin [n=aj@unaffiliated/fujin] has joined #ubuntu [07:19] george: what this command prompts to you ? OpenGL vendor string: ATI Technologies Inc. ? [07:19] george: System -> administration -> restricted driver manager === Zdra [n=zdra@251.248-242-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [07:19] server glx vendor string: SGI [07:19] client glx vendor string: SGI [07:19] OpenGL vendor string: Mesa project: www.mesa3d.org === Ahadiel [n=ahadiel@S010600131042857c.vc.shawcable.net] has joined #ubuntu === Moriarte [n=Moriarte@71-215-14-214.spkn.qwest.net] has joined #ubuntu [07:19] george: so you are not using the propritary ATI driver [07:19] Why would Swiftweasel (Firefox) be trying to open /home/my-home-dir/.mozilla/swiftweasel/init.d ... and crash when it can't? === Blindiak [n=mika@AClermont-Ferrand-157-1-190-165.w90-28.abo.wanadoo.fr] has joined #ubuntu === Blindiak [n=mika@AClermont-Ferrand-157-1-190-165.w90-28.abo.wanadoo.fr] has left #ubuntu ["Ex-Chat"] [07:20] george: You have to first make ATI propriery driver working. And then https://help.ubuntu.com/community/CompositeManager/Xgl [07:20] anyone, snmptrapd? === davina [n=davina@cpc1-sout6-0-0-cust616.sotn.cable.ntl.com] has joined #ubuntu [07:20] george: you can either do Restricted Driver Manager or Envy [07:20] george: make sure to backup xorg.conf and be able to restore if X server feils [07:20] !envy | george scguy318 [07:20] george scguy318: envy is a script that may leave you envious of those who have not used it, use the resticted manager to install binary drivers or use the instructions on the wiki, this script may break your machine very badly! === penney [n=penney@pool-71-117-207-87.ptldor.fios.verizon.net] has joined #ubuntu [07:20] enabling the restricted driver now. [07:20] Howdy all [07:20] MythTV keeps crashing everytime I view my videos... [07:20] mm k :) [07:21] i don't know what U'r talking about, can you yeach me.......? [07:21] Anyone help? [07:21] i have always had success with it but kk === TLE [n=kenneth@217.74.211.126] has joined #ubuntu [07:21] geoffrey, http://curl.haxx.se/ === [2] Netham45 [n=netham@c-67-190-103-57.hsd1.co.comcast.net] has joined #ubuntu === b33r [n=b33r@212.36.209.171] has joined #ubuntu === skinnypuppy1334 [n=user@66-168-108-106.dhcp.mdvl.ga.charter.com] has joined #ubuntu [07:21] george: have you tried to set beryl or compiz before, right ? [07:21] yes, on a Dell with an NVidia card. [07:21] i'll help U penney [07:21] I believe my MythTV SQL DB is broken... [07:21] this is an HP, with the ATI 200M [07:22] ooo... just buy [07:22] george: I have a HP too :P What model ? I have a hp6040 === b33r is now known as b33r- [07:22] DV5000 [07:22] user28: :( === dew [n=dew@c-69-248-63-87.hsd1.nj.comcast.net] has joined #ubuntu === evolipel [n=mlepilov@c-76-118-28-90.hsd1.ma.comcast.net] has joined #ubuntu [07:22] user28: is there anyway to reset my DB? === evolipel [n=mlepilov@c-76-118-28-90.hsd1.ma.comcast.net] has left #ubuntu ["Ex-Chat"] [07:22] got to restart [07:22] evening all.... I've got a question regarding the minimize all button.... [07:23] george: anyway... the wiki I gave you should be enough after installing and properly running the ATI restricted driver [07:23] dew: there's a minimize all button!? [07:23] http://pastehere.com/?onurnr i cannot get a higher resolution than 800x600... what gives?? [07:23] cj: yes === cj looks at the thing in the bottom left... [07:23] cj: bottom left corner is "show desktop" [07:23] :( sorry, i don't know what is DB? [07:23] cj... LoL [07:23] hey, look. it makes things go away... [07:23] does it get bound to windows-d? [07:23] user28: he's asking about his MythTV DB [07:23] user28: a 'database' probably [07:23] no [07:23] user28: The mySQL DB that mythTV installs? [07:23] Is there a way to get that to ignore certain windows? [07:24] dew: there's always a way. you've got the source, after all :) [07:24] dew: I doubt there's a stock way, though, no [07:24] cj... I'm aware of that, but I wouldn't even have the slightest clue to look for it though. [07:24] can anyone here assist me in installing a slackware based distro alongside fiesty? === yust [n=emanuele@host5-107-static.73-81-b.business.telecomitalia.it] has joined #ubuntu [07:25] :( sorry, I still don't know. oya, where U come from, I come from indonesia. === dstadulis [n=daniel@129.210.61.232] has joined #ubuntu [07:25] danielronin: the slackers should be more expert on this than the ubuntu guys. This is really a slack issue [07:25] user28: NW US === FelixTheCat [n=none@71-12-74-136.dhcp.gnvl.sc.charter.com] has joined #ubuntu === dedi [n=dedi@adsl-62-167-25-82.adslplus.ch] has joined #ubuntu [07:25] danielronin: nothing have to be changed in Ubuntu to do that. [07:25] dew ... set the windows you want to keep to be present on all desktops, and the ones you want to "minimize" to be present "this desktop only" ... then just switch desktops [07:25] well crapy I guess I'll go look some more === nandemonai [n=nandemon@ppp121-45-120-131.lns11.adl6.internode.on.net] has joined #ubuntu [07:26] it's my 1st chat [07:26] kk [07:26] well i pretty much just need some help configuring grub === penney [n=penney@pool-71-117-207-87.ptldor.fios.verizon.net] has left #ubuntu ["looking] === erythro is now known as Erythro [07:26] i have a gigabit port on my nfroce3 250gb chispet motherboard, but it will only run with 100mbit. what can i do to fix it? [07:26] i'm trying to install a live cd to my hdd, but it's lilo based [07:26] (i know not to write MBR) [07:26] are U a student? [07:26] dedi: you need to hook up your card to something that supports 1 Gbit === sauvin [n=sauvin@74-141-157-109.dhcp.insightbb.com] has joined #ubuntu [07:27] Well, I should be a bit more specific, I guess.... I'm trying to keep my screenlets on the desktop... currently, whenever I hit CTRL-ALT-D or press the minimize all button, they minimize along with it. === Yasumoto [n=Yasumoto@cpe-75-84-49-174.socal.res.rr.com] has joined #ubuntu [07:27] user28: type the name of the person you're talking to before your questions [07:27] scguy318: my switch only shows 100mbit [07:27] dew, sry, screenlets? [07:27] dedi, does ifconfig show it as 100 or 1000? [07:27] dedi: probably your switch only supports 100mbit [07:28] dedi, yeah that was my next question is your switch gig capable [07:28] dedi: the 1gbit ones are quite expensive and rare in home devices. [07:28] nutubuntu.... yep. Screenlets. They're like gDesklets. === bullgard4 [n=detlef@p54BF0775.dip0.t-ipconnect.de] has joined #ubuntu === katha [n=katha@flash.csn.tu-chemnitz.de] has joined #ubuntu [07:28] danielronin: the cd should make a new one for you [07:28] penny #mythtv-users === katha [n=katha@flash.csn.tu-chemnitz.de] has joined #ubuntu === Claude [n=Claude@168-103-147-118.tukw.qwest.net] has joined #ubuntu [07:28] dew ... if you move from one workspace (or desktop) to another, are they present? maybe that would serv [07:28] macd dows ifconfig show that? === Claude is now known as Claudee === kritical [n=kritical@kritical.wxnz.net] has joined #ubuntu [07:29] i have a gigabit cable and its working with my second computer [07:29] dedi: no, you have to check your switch manual. [07:29] dedi, no I wasnt really thinking when I said that [07:29] :( sorry penney, my english was too bad, its my way to learn english. bay === [2] Netham45 is now known as Netham45 [07:29] helpppppppppp [07:29] http://ubuntuforums.org/showthread.php?t=543349 [07:29] help what [07:29] nutubuntu... yeah, they are stuck to the desktop. It would work that way, but IMO it's a cop out that way. I'd much rather have them there when I minimize. === tyoc [n=ubuntu@189.181.148.252] has left #ubuntu [] [07:30] dedi, what does lspci list as your network interface, and have you tried using a different cable? === WONToN is now known as overclucker [07:30] claudee have you checked your roughter settings [07:30] Claudee: you need to make a greater description of your current settings in your post. For instance, is your 'file server' in your LAN or over the internet ? [07:30] calaudee or power cycling your modem === ultra [n=ultra@67-58-203-213.amtelecom.net] has left #ubuntu [] [07:31] macd it lists only as nVidia Corporation CK8S Ethernet Controller (rev a2) - and yes, tried diffrent cable. have some expensive 1gbit specified cables [07:31] dew ... it's like the mom whose newborn baby has a cold ... doctor says give him warm bath, let him air dry; she says eek, he'll catch pneumonia; doctor says, yes ... and THAT we know how to cure. I can't tell you how to keep your screenlets when you show desktop ... but if changing desktops "works" ...? === Crustacean-Bob [n=moneyman@cpe-66-67-154-20.rochester.res.rr.com] has joined #ubuntu [07:31] calaudee some cable/dsl modems will do that couse of the adress changes powercycling normaly fixes it === Big_Head [n=ahmed@87.109.10.136] has joined #ubuntu [07:32] nutubuntu... LoL I understand. I figured it was worth running by the people in here. [07:32] Anybody know where I can find an mp4 decoder for totem === Ayabara [n=anr@62.70.2.252] has joined #ubuntu [07:32] Crustacean-Bob: try fddshow === Kaja- [n=nkaja@bb-81-175-215-218.dsl.phnet.fi] has joined #ubuntu === homanj [n=homanj@24-197-201-200.dhcp.roch.mn.charter.com] has joined #ubuntu === pyrak [n=pyrak@ip68-109-193-64.pv.oc.cox.net] has joined #ubuntu === homanj [n=homanj@24-197-201-200.dhcp.roch.mn.charter.com] has left #ubuntu [] [07:33] dedi, try 'sudo dpkg-reconfigure network-manager' then plug your ethernet cable back in and see what happens === hoarycripple [n=hoarycri@c-71-192-52-164.hsd1.ma.comcast.net] has joined #ubuntu [07:33] dedi, also I assume you have tried different ports on the switch [07:33] server is LAN === At0mic_P1 [n=arch_ato@host-216-76-226-199.jan.bellsouth.net] has joined #ubuntu === areti [n=areti@c-66-41-195-62.hsd1.mn.comcast.net] has joined #ubuntu [07:34] LOL [07:34] yea powercycle the modem [07:34] bet it will work again [07:34] k [07:34] be back if it didnt work [07:34] thanks [07:34] just be in linux when you do [07:34] LOL === evolipel [n=mlepilov@c-76-118-28-90.hsd1.ma.comcast.net] has joined #ubuntu === skinnypuppy1334 [n=user@66-168-108-106.dhcp.mdvl.ga.charter.com] has left #ubuntu ["Leaving"] === evolipel [n=mlepilov@c-76-118-28-90.hsd1.ma.comcast.net] has left #ubuntu ["Ex-Chat"] [07:35] Anyone know of any tricks for using USB speakers? (e.g. to automatically change the default output for gstreamer/alsa when they are plugged in)? [07:35] dew, sure, maybe someone knows. I'm nutubuntu myself ;P === chaky [n=chaky@unaffiliated/chaky] has joined #ubuntu [07:36] cant you just slect them in the sound controle as usb speakers [07:36] nutubuntu.... that's a flavor I've never heard of... what is? [07:36] the window decorations provided by metacity are messed up...the icon that should be in the left is shifted to the right, and the title is truncated, as if the 'visible area' of the title bar started a bit to the right...and there are no __, [] , >< buttons [07:36] i knoe my system has that option [07:36] what might be causing this [07:36] is there some process I should restart? === blz777 [n=blaze@85.11.167.49] has joined #ubuntu === Kaja- is now known as Kaja [07:36] "nu tu ubuntu" = i'm a n00b with Ubuntu [07:36] adlai try retsrarting x i guess [07:36] Adlai: try metacity --replace [07:36] gogeta: nope [07:37] Megaqwerty: nope [07:37] tried both of those [07:37] Adlai: then maybe try switching themes? === lofl [n=rezo@124-197-24-170.callplus.net.nz] has joined #ubuntu [07:37] also tried that [07:37] oh i thoought it was ubuntu using the 'nut' window system [07:37] adjust display? === Griver [n=Griver@90-229-133-48-no52.tbcn.telia.com] has joined #ubuntu === evolipel [n=mlepilov@c-76-118-28-90.hsd1.ma.comcast.net] has joined #ubuntu [07:37] i cant get more than one resolution after installing nvidia driver, what am i doing wrong?? here is my xorg.conf: http://pastehere.com/?onurnr === evolipel [n=mlepilov@c-76-118-28-90.hsd1.ma.comcast.net] has left #ubuntu ["Ex-Chat"] === TomB [n=tomb@ACCE2934.ipt.aol.com] has joined #ubuntu [07:38] hi, i just wanted to ask if someone had tried to play Fritz10 in ubuntu :) [07:38] taimel, try asking what NVidia is doing wrong instead, lol [07:38] :) I'm not as n00b as I used to be, but still pretty new to it. Right now I have a Firefox issue that's beginning to wear me down ... [07:38] adlai are they just off center or cruppted? [07:38] nutubuntu... LoL I gotcha... what's the issue with firefox? === Coole^ [n=justin@71-212-52-231.tukw.qwest.net] has joined #ubuntu === peeps_work [n=peepsalo@cpe-70-112-16-13.austin.res.rr.com] has joined #ubuntu [07:39] taime1, what other resolutions do you want? [07:39] Swiftweasel (or Firefox) segfaults frequently. I strace it and it's trying to open /home/my-home-dir/.mozilla/swiftweasel/init.d ... it crashes when it can't [07:39] nut we genrely just use the real firefox so i dont knoe [07:40] Nutubuntu: have you tried reinstalling it? Binary might be corrupted. (just a thought) [07:40] nutubuntu.... hmmm interesting. [07:40] nutubuntu, so your using 3rd party firefox === fender_ [n=fender@mail.dropletsap.com] has joined #ubuntu [07:40] the deban one [07:40] swiftfox === _TomB [n=tomb@ACCE2934.ipt.aol.com] has joined #ubuntu [07:40] Nicark: i want 1600x1200 and under, but i have listed them all, and now im trying it with just one listed. but no matter what i do, i only get 800x600 [07:40] they got forxed to rename some time ago [07:40] Nutubuntu: Swiftweasel or Swiftfox are note too much stable [07:40] but ubuntu comes with the ofical firefox [07:40] Megaqwerty, overclucker - was using the stock Ubuntu firefox, started seeing this segfault behavior, went to Swiftweasel and continued to see the same thing === Tempest [n=dm@68-117-94-121.dhcp.eucl.wi.charter.com] has joined #ubuntu [07:41] taime.. could it be that your monitor doesn't support those higher resolutions? Or your card doesn't support them? === Claudee [n=Claude@65-102-187-137.tukw.qwest.net] has joined #ubuntu [07:41] KurtKraut, true [07:41] Nutubuntu: ah. *shrugs* never had that problem before === Brandon [n=brandon@c-67-183-72-62.hsd1.wa.comcast.net] has joined #ubuntu === Megaqwerty [n=megaqwer@unaffiliated/megaqwerty] has left #ubuntu ["'night] [07:41] power cycling did nothing [07:41] nut you got some kind of addons? === Kinks_ [n=Kinks@wnklmb01dc1-219-146.dynamic.mts.net] has joined #ubuntu [07:41] nutubuntu.... I agree with others... have you tried re-installing? [07:42] claudee so your internet is not working but your lan is? [07:42] taime1, did you tried by writing those modes in your xorg.conf ? Modes "1680x1050" "1280x1024" "1024x768" "800x600" "640x480" [07:42] its not working in just ubuntu on this laptop [07:42] its working in windows === basanta [n=basanta@202.79.37.177] has joined #ubuntu [07:42] it was previously working and just stopped [07:42] where you in linux when you powercycled === revilodraw [n=sexgod@220-253-25-50.VIC.netspace.net.au] has joined #ubuntu [07:43] wait [07:43] Nickark: yes. [07:43] are you hibernating your windows install [07:43] no [07:43] BRB [07:43] humm [07:43] exaile sometimes randomly disappears... y? [07:43] dew, yes, problem persisted through three revs of Firefox, if I'm counting right ... since I installed Feisty, in fact, on this newly built box. AMD64 X2, 32-bit Feisty ... I suspect it's something to do with the CPU and the kernel, but really that's a total guess. strace says it's trying to stat64 a nonexistent directory in ~/.mozilla when it segfaults [07:43] have you checked your roughter === stmiller [n=stmiller@71-9-142-123.dhcp.mdfd.or.charter.com] has left #ubuntu ["Konversation] [07:44] taime1, I don't see those other modes in the xorg.conf you posted, only 1024x768 [07:44] you said both wired and wireless are faling correct [07:44] only in ubuntu on this laptop [07:44] Nutubuntu: i have had it both ways. the point is, i only get 800x600 resolution. === ace2001ac [n=ace2001a@c-24-17-255-154.hsd1.wa.comcast.net] has joined #ubuntu === river69 [n=ruver@58.69.84.196] has joined #ubuntu [07:44] best test is to plug modem directly into laptop powercycle it and boot into ubuntu [07:45] if it still failes it is ubunntu === opopanax [n=steve@c-67-168-174-97.hsd1.wa.comcast.net] has joined #ubuntu [07:45] we will ahve to go from there [07:45] taime1, are the HorizSync and VertRefresh correct for your specific monitor? [07:45] i have a combined router/modem [07:45] still [07:45] i forgot my login in my ubuntu box how do i retrieve my user name? [07:45] Nutubuntu: thats what it detected. [07:45] how do you use ASCII values on here? In windows it is alt, but what is it in Ubuntu? [07:45] you can direct connect it [07:46] it seems to me the roguhter is rejecting it [07:46] but the test i said would conferm that or kill it [07:46] taime1, I'm not expert on this ... detected how? Have you checked published specifications for your monitor? If those two parms are wrong, things mightn't work too well === ducky_id [n=dna@125.163.202.248] has joined #ubuntu === BetaTester [n=BGmIRC09@80.80.151.9] has joined #ubuntu [07:47] claudee have you used ifup and ifdown commands and did they say anything === Prognatus__ [n=irc@147.80-202-51.nextgentel.com] has joined #ubuntu === fulat2k [n=fulat2k@116.135.95.219.brf01-home.tm.net.my] has joined #ubuntu [07:47] no === Vicfred [n=vicfred@189.145.207.136] has joined #ubuntu [07:47] Nutubuntu: these are the sync ranges from my previous configuration. the only thing that has changed is ubuntu detected the newer card, and had me install the nvidia-glx driver, rather than the legacy driver [07:47] hi all [07:47] ill check those [07:47] that lest you shutdown and turn on your nic [07:47] like ifup eth0 [07:48] probly sodu as well === Juki [n=juki@dsl-hmlbrasgw1-ff0ec100-135.dhcp.inet.fi] has joined #ubuntu [07:48] k, brb === Evanlec [n=evan@c-75-67-237-157.hsd1.nh.comcast.net] has joined #ubuntu === ir8 [n=picsandp@58.173.65.141] has joined #ubuntu [07:48] lol isnt claudee on a roughter lol why isnt he using the other pc to chat === sudhanshu [n=sudhansh@59.145.136.1] has joined #ubuntu [07:48] alot easer [07:49] okay so i just booted into my new installation of feisty, but my user appears to have no admin rights in gnome [07:49] easy way to fix this? [07:49] evanlec [07:49] evanlec, yes and no [07:49] ubuntu does not have a root account === rat1101 [n=rat1101@pool-71-163-254-224.washdc.fios.verizon.net] has joined #ubuntu [07:49] you use sudo [07:49] gah! [07:49] ya, i can run sudo commands === billybob [n=billybob@75.30.163.165] has joined #ubuntu [07:50] if you whant a root console do sudo su [07:50] but how to get gnome to recognize me as root? [07:50] gogeta: or sudo -s [07:50] evanles if you need # then sudo su [07:50] or i mean, atleast admin [07:50] any apps that need admin will propt [07:50] gogeta: to get an app to run under root, sudo if console, gksudo if GUI [07:50] and ask for your user password [07:50] but like, im missing tons of entries in system menu [07:51] cant even click add/remove under applications menu [07:51] you can === mon^rch [n=anonymou@S0106000fea33f1bb.cg.shawcable.net] has joined #ubuntu === effie_jayx [n=valles@ubuntu/member/effie-jayx] has joined #ubuntu === Gat0rvean [n=gat0rvea@74-140-172-217.dhcp.insightbb.com] has joined #ubuntu === revilodraw [n=sexgod@220-253-25-50.VIC.netspace.net.au] has left #ubuntu [] [07:51] its not there! [07:51] ohh [07:51] now thats not good [07:52] evanlec, fresh install? [07:52] yes [07:52] manual install mind you [07:52] try again [07:52] taime1, I'm baffled. what you posted looks fine to me, except for 1024x768 being the only mode for any of the display subsections :/ I don't see why it's not working. [07:52] i probably messed something up [07:52] yuo [07:52] yup [07:52] lord, i've only spent about 67 hours doing this install [07:52] why not use the live cd [07:52] is it possible to have 2 domains linked to one server? [07:52] lol [07:52] because im running raid array [07:52] Nutubuntu: me needer === ss [n=oranye@125.164.252.24] has joined #ubuntu [07:53] then the alt cd [07:53] i dont understand, why cant i do a sudo command to create a new user with admin rights and then login to that?? [07:53] ensecure [07:53] the alt cd doesnt help me, i have to use dmraid package, which is not in ubuntu by default on any cd [07:53] up to you though [07:54] why is it unsecure? [07:54] well === ziggy [n=ziggy@71-212-98-98.tukw.qwest.net] has joined #ubuntu [07:54] cant he just install the base desktop [ackage [07:54] it should install anything hes missing [07:54] have you ever used irc on root, [07:54] ? [07:54] yea i know thats bad... [07:54] but im not talking about being root, im saying make a new user === [diablo] [n=[diablo] @unaffiliated/miles/x-000000001] has joined #ubuntu [07:54] Evanlec, dmraid? [07:55] apt-get install ubuntu-desktop [07:55] Nutubuntu, yes [07:55] thats a full paackage [07:55] same stuff on the cd [07:55] kk, i try [07:55] but sence you installed your driver there to === fulio [n=fulio@cpe-76-169-155-191.socal.res.rr.com] has joined #ubuntu === BigToe7000 [n=bigtoe70@cpc3-hatf3-0-0-cust792.lutn.cable.ntl.com] has joined #ubuntu [07:55] anyone using the kiba dock? [07:56] !anyone | fulio [07:56] fulio: A large amount of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? [07:56] doh, ubuntu-desktop is already latest version [07:56] LOL [07:56] cant try -f [07:56] does anyone use kiba docks? [07:56] can [07:56] Evanlec, Then you have a full default Gnome Desktop ( Default for Ubuntu that is ) [07:56] lol but might brake it more [07:56] he did a manul install === disinterested [n=green@75-164-153-212.ptld.qwest.net] has joined #ubuntu === phoneguy509 [n=techboyf@c-67-185-13-50.hsd1.wa.comcast.net] has joined #ubuntu === Coole^ [n=justin@71-212-52-231.tukw.qwest.net] has joined #ubuntu [07:57] dude, im in terminal and all i get is $ instead of the usual evan@ubuntu$ [07:57] what does that mean? [07:57] Evanlec, Did you get the system installed? [07:57] ~/.bashrc [07:57] i THINk so... [07:57] Evanlec, Are you booted from your hard drive now? [07:57] its running isnt it? [07:57] i need the room for Ubuntu effects please [07:57] yea... [07:57] hoe bought using apt-get reinstall === Claudee [n=Claude@65-102-187-141.tukw.qwest.net] has joined #ubuntu [07:58] no success [07:58] and the desktop package [07:58] ziggy: just type /join #ubuntu-effects [07:58] Evanlec, Ok, and you just booted normally from grub, not in recovery mode? [07:58] ty [07:58] howver, ifdown siad eth1 was not configured [07:58] correct === robert|detatched [i=robert_@r-butler.net] has joined #ubuntu [07:58] well there ya go [07:58] like to get PyChart on my ubuntu how do i do that [07:58] claudee [07:58] how do i configure it [07:58] reconfigure the nic === slicks_mage [n=slick@pool-72-66-130-166.slsbmd.east.verizon.net] has joined #ubuntu [07:58] Evanlec, What user are you running as now? === Zemus [n=Yeti@unaffiliated/zemus] has joined #ubuntu === redlow [n=walter@dslb-084-060-131-140.pools.arcor-ip.net] has joined #ubuntu === BlueXero [n=crodgers@203-184-39-148.jetbuster.co.nz] has joined #ubuntu [07:59] Jordan_U, im logged in as the user i made "manually" following the FakeRaidHowTo guide [07:59] claudee your fisr nic should be eth0 [07:59] can anyone here help me? im missing the libstdc++-libc6.1-1.so.2 [07:59] Evanlec, Ok, what happens when you run startx ? [07:59] and i can use sudo commands because i edited suduoers === khermans [i=khermans@nat/cisco/x-18a1372c59d27fe3] has joined #ubuntu [08:00] X: user not authorized to run the x server, aborting === lasse [n=lasse@229.pool85-50-124.dynamic.orange.es] has joined #ubuntu [08:00] lol, how can i not be authorized to run x ? === yjwong [n=yjwong@60.53.95.250] has joined #ubuntu [08:00] can anyone here help me? im missing the libstdc++-libc6.1-1.so.2?? [08:01] taime1, can you pastebin your current xorg.conf? the one you pastebinned before looks fine, I don't see a single thing wrong ... so it *should* work; it's bizarre that it does not. How is the current one different? [08:01] gogeta, im using wireless [08:01] Evanlec, try "sudo /etc/init.d/dgm restart" === dodja [n=dodja@ppp-71-139-5-123.dsl.snfc21.pacbell.net] has joined #ubuntu [08:01] claudee how many nics that laptop have [08:01] Evanlec, Can you link to the guide you followed? [08:02] wired and wireless? [08:02] ya [08:02] !raid [08:02] Tips and tricks for RAID and LVM can be found on https://help.ubuntu.com/community/RaidConfigurationHowto and http://www.tldp.org/HOWTO/LVM-HOWTO [08:02] Jordan_U can u help me out when your done helping Evanlec? [08:02] https://help.ubuntu.com/community/FakeRaidHowto [08:02] claudee the networking config is in system admerstration networking === harmental [n=ricardo@AGrenoble-152-1-71-248.w86-193.abo.wanadoo.fr] has joined #ubuntu [08:02] sudo: /etc/init.d/dgm: command not found [08:02] how can i install kiba-docks?? [08:02] oops, typo === borg_ [n=olaf@80.149.17.21] has joined #ubuntu === phoneguy509 [n=techboyf@c-67-185-13-50.hsd1.wa.comcast.net] has joined #ubuntu [08:03] i dont understand this command "Use "sudo make install" instead of "checkinstall" [08:03] slicks_mage, that library should be found in /usr/lib [08:03] anyone good with WI FI card install on feisty? === noxs_ [n=noxs@e178069239.adsl.alicedsl.de] has joined #ubuntu [08:04] ok so i need2 create a symbolic link somehow right? and if so how? [08:04] evanlec sudo -version === Evanlec [n=evan@c-75-67-237-157.hsd1.nh.comcast.net] has joined #ubuntu [08:04] slicks_mage, Ask your question and if anyone can help they will === Tomcat_` is now known as Tomcat_ [08:05] evanlec sudo -version === ducky_id [n=dna@125.163.202.248] has joined #ubuntu [08:05] okay, doing the restart gdm command just kicked me out into text === Ieuan [n=xer@cpc1-pnth1-0-0-cust447.cdif.cable.ntl.com] has joined #ubuntu === Hit3k [n=allan@250.216.dsl.mel.iprimus.net.au] has joined #ubuntu === gunspoja [n=shiester@CPE-202-169-19-240-rob01.commslogic.net.au] has joined #ubuntu [08:05] hello #ubuntu users === BlueXero is away [08:05] sudo -version no work === BlueXero is back. === Ieuan [n=xer@cpc1-pnth1-0-0-cust447.cdif.cable.ntl.com] has left #ubuntu ["Ex-Chat"] === kauer [n=kauer@lochiel-wan-out.nullarbor.com.au] has joined #ubuntu === binMonkey [n=rich1@71-209-137-168.phnx.qwest.net] has joined #ubuntu === danv12 [i=danv12@nat/sun/x-2a52b923fc8beb08] has joined #ubuntu [08:06] I want to use ubuntu on a usb memory stick, but I want to have 2 partitions on it: 1 for the OS and 1 for data (which should be readable by windows also). how can this be done? === kauer [n=kauer@lochiel-wan-out.nullarbor.com.au] has left #ubuntu [] [08:06] ubuntu is to big [08:06] for a memery stick [08:06] no its not === elkadar [n=phorbacz@wn202.internetdsl.tpnet.pl] has joined #ubuntu [08:06] evanlec, oops try man sudo [08:06] not if the memory stick is big enough ;) [08:06] is there an ubuntu wireless channel? [08:06] bigger then 2 gigs === peacez [n=peacez@218.111.230.125] has joined #ubuntu [08:07] i have a webpage here that says you only need a 1gb memory stick, and mine is 2gb [08:07] binmonkey.. need that too.. my wifi is hosed === tvgm2 [n=Miranda@c-68-55-61-145.hsd1.md.comcast.net] has joined #ubuntu === sharperguy [n=sharp@88-109-56-140.dynamic.dsl.as9105.com] has joined #ubuntu [08:07] the install says 2 gigs minum [08:07] feisty install [08:07] sudo -v returns nothing... [08:07] yep === pr100 [n=user@cpc2-cmbg4-0-0-cust874.cmbg.cable.ntl.com] has joined #ubuntu [08:07] phoneguy509: what's yours doing? [08:07] I'm going to put edgy on it [08:07] it must be smaller or something :/ [08:07] is there a sudo manpage? [08:07] why not just use dsl [08:07] yes [08:08] and its long [08:08] gogeta, https://wiki.ubuntu.com/LiveUsbPendrivePersistent [08:08] dsl = useless [08:08] ok good [08:08] but -v is the version operator [08:08] damm small linux [08:08] i tried it, its pathetic [08:08] not working at all... almost like its not on.. minipci.. [08:08] doesn't even work most of the time [08:08] dell truemobile1400 [08:08] works finwe on my mp3 player/mass storage [08:08] I tried it on 3 different usb sticks, attempted to boot it on 4 different computers and something went majorly wrong every single time [08:08] phoneguy509: sorry. i'm no help there. [08:08] whereas ubuntu is far more reliable in my opinion [08:09] boots fine on my pc [08:09] since an update a few days ago my feisty box is mounting my mp3 player as read-only - how can I get it back to read/write? [08:09] thanks... thinking i might go to vista on the laptop anyways.. [08:09] both threw the emu and nativ [08:09] gogeta, that doesn't really help me very much [08:09] Jordan_U, any other ideas? :( [08:09] you need to give your drive a mbr [08:09] love ubuntu opn the desktiop thiough [08:09] ot dsl whont boot [08:09] gogeta: it boots the stick just fine [08:09] Evanlec, I am not quite sure what you have right now :) [08:09] well yout=r not gonna fit ubuntu on there even if you did [08:10] i think i have a case of...user created manually that doesnt have squat for rights === Ahadiel [n=ahadiel@S010600131042857c.vc.shawcable.net] has joined #ubuntu [08:10] you would have no space === mon^rch [n=anonymou@S0106000fea33f1bb.cg.shawcable.net] has joined #ubuntu [08:10] i cannot connect to open/free wireless networks. using bcm4318 card with ndiswrapper. anyone have ideas? [08:10] Evanlec, Make sure that the computer is not connected to the internet, and since I am curious, even though you should never do this again... try sudo startx [08:10] gogeta: www.pendrivelinux.com begs to differ [08:10] gogeta, It fits on a CD doesn't it? === black_death [n=sebastia@e178251176.adsl.alicedsl.de] has joined #ubuntu [08:11] compressed [08:11] ubuntu 6.10 can apparently be booted from a 1gb usb drive [08:11] it does [08:11] server is already active for display 0 === tiddi [n=tiddi@cpe.ge-1-1-0-709.0x57361a62.hsnqu1.customer.tele.dk] has joined #ubuntu [08:11] gogeta, Exactly, using squashFS === krammer [n=krammer@c-66-177-57-246.hsd1.fl.comcast.net] has joined #ubuntu === qmx_ [n=qmx@a88-115-41-213.elisa-laajakaista.fi] has joined #ubuntu [08:11] i already did sudo startx i believe [08:11] like to get PyChart on my ubuntu how do i do that === ShinSR-71 [n=mb@82.101.254.223] has joined #ubuntu [08:11] gogeta, Which the guide I linked you to will give you instructions to do [08:11] evaalic, are all menu optioins there? [08:11] slicks_mage, i'm not sure whether you have read this thread, but here it is: http://ubuntuforums.org/showthread.php?t=353521&page=3 [08:11] can connect to router/ then tried lan still no luck [08:12] Jordan_U, would you be able to give me advice on how to get this working? [08:12] Evanlec, Try again and give any interesting errors [08:12] well then its easy === nichos [n=nichos@c-66-177-166-95.hsd1.fl.comcast.net] has joined #ubuntu [08:12] use that guide [08:12] tthen make another partation [08:12] hi all, is there a known issue waking the binary nvidia driver from sleep? My monitors don't wake back up. [08:12] gunspoja, What? [08:12] ok ty yjwong ill read it right now [08:12] mount point /home [08:12] bauer: "sudo apt-get install python-pychart" [08:12] fatal server error: server already active for display 0, if server is no longer running, remove /tmp/.X0-lock and start again. === homanj [n=homanj@24-197-201-200.dhcp.roch.mn.charter.com] has joined #ubuntu [08:13] i cannot connect to open/free wireless networks. using bcm4318 card with ndiswrapper. anyone have ideas? [08:13] Jordan_U: don't worry, I'll read the guide you mentioned earlier [08:13] thats all a home partation is [08:13] Evanlec, Ahh, try ctrl+alt+F7 === Kom0dor [n=god@adsl-217-170-32.bgk.bellsouth.net] has joined #ubuntu [08:13] Evanlec, ( F1 to get back to terminal ) === mrigns [n=mrigns@unaffiliated/mrigns] has joined #ubuntu === coreofvengeance [n=jeff@nat-168-7-244-243.rice.edu] has joined #ubuntu [08:14] u mean ctrl+alt+f1 ? [08:14] can connect to router/ then tried lan still no luck [08:14] ya, i jus tried that, gave me some font errors === yjwong is now known as yjwong|lunch [08:14] i think im missing some major part of my installation lol [08:14] wifi is one problem/ I tried to use eth for router still no luck [08:15] Evanlec, No, F7 to get to the tty X is most likely on [08:15] G'night all [08:15] ctrl+alt+f7 doesnt appear to do anything.. [08:15] Evanlec, Ok [08:16] i cannot connect to open/free wireless networks. using bcm4318 card with ndiswrapper. anyone have ideas? [08:16] binmokey have you tryed using the networking config to rescan [08:16] i dont think ubuntu does it auto [08:16] Evanlec, "pgrep X" [08:16] unless you do it threw the config [08:16] gogeta: i don't know what that is. i'm using wifi-radar. [08:17] system adming networking [08:17] 8471 [08:17] Evanlec, Ok, so X is running === ashu18 [n=ashu_roc@122.50.174.106] has joined #ubuntu [08:17] apparently [08:17] gogeta: i've also tried all the iwconfig options: essid, ap, etc. [08:17] maybe its not open [08:17] Evanlec, kill 8471 [08:17] just showing === ashu18 [n=ashu_roc@122.50.174.106] has left #ubuntu [] [08:18] no. it's the library net and a couple of coffee shops. all free and open. [08:18] as long as your nics working it should connect [08:18] cannot connect to my router (wifi) so I tried to connect with ether cable and still no luck [08:18] hey can ne1 here tell yjwong ty when he/she gets bak if im not here? aim works finally :) [08:18] another kid was having this issue to [08:19] me? [08:19] im wired lol lucky me [08:19] slicks_mage, Why aren't you using Gaim? [08:19] hate gaim === PaulEU [n=pawcioos@nat-38.mikolow.net] has joined #ubuntu [08:19] aim works now tho :) [08:19] gogeta: my wirelss works at home. === evanlec [n=evan@c-75-67-237-157.hsd1.nh.comcast.net] has joined #ubuntu [08:19] okay, that kicked me out to tty1 === chaosrl [n=jeff@nat-168-7-244-243.rice.edu] has joined #ubuntu === fraco [n=fraco@213.219.133.114.adsl.dyn.edpnet.net] has joined #ubuntu [08:19] have you tryed restarting the nic === pr100 [n=user@cpc2-cmbg4-0-0-cust874.cmbg.cable.ntl.com] has left #ubuntu ["ERC] [08:19] then i did gdm restart to get back herer [08:20] hello! Who anybody know about svn ? [08:20] gogeta: what is nics? [08:20] I have problem with commiting [08:20] its probly configured to your roughter === tarntow [n=jaxon@221.126.91.230] has joined #ubuntu [08:20] networking card [08:20] how can i remove the button bar. i ahve kiba-dock running. [08:20] see: http://pastebin.com/d3d3651cd [08:20] I tried delete this file, svn up, next I did changes in this file and commit - the same error [08:20] evanlec, Are you on IRC from that computer? [08:20] Anyone suggest a good program to make backups [08:20] ya [08:20] network interface card aka nic [08:20] i dont have seperate computer to use [08:20] who anyone know why? [08:20] yes crustancean use acronis [08:20] evanlec, lol didn't realize [08:20] yea ;p [08:21] oh man, i buggered this install up [08:21] gogeta: if i iwconfig essid and ap shouldn't those override home setup. [08:21] evanlec, Might want to reconnect from screen so you can connect to irssi from another terminal later === Drunken-Ktulhu [n=max@213.141.151.212] has joined #ubuntu [08:21] Krammer can I apt-get acronis? [08:21] Jordan_U, yea probly, ugh [08:21] ne1 know how to get a wireless network connected via my pc? it doesn't show any networks in wireless assistant? [08:21] no google it === ant30 [n=aperezar@19.Red-80-59-20.staticIP.rima-tde.net] has joined #ubuntu [08:21] Jordan_U, it appears im missing a lot of files or something, maybe i should just reinstall? [08:21] slicks_mage, Do you know the chipset of your card? [08:22] bin yea those are the new configs but you might have to bring the card down and back up for it to take effect [08:22] gogeta: or shouldn't wifi-radar connect to networks? [08:22] evanlec, That would be giving up :) [08:22] no jordan how would i find that out? [08:22] cannot connect to my router (wifi) so I tried to connect with ether cable and still no luck [08:22] gogeta: you mean ifdown/ifup? [08:22] yea [08:22] slicks_mage, lspci, or System -> Preferences -> Hardware Information === PaulEU [n=pawcioos@nat-38.mikolow.net] has left #ubuntu [] [08:22] Jordan_U, i know, i nearly gave up on that fakeraidhowto thing, when i discovered a patch to GRUB that fixed my problem [08:22] gogeta: dang. i never even thought of trying that. dang. === Jacek_Kendysz [i=Jacek_Ke@unaffiliated/JacekKendysz] has joined #ubuntu [08:22] LOL [08:23] BCM4318 [AirForce One 54g] 802.11g Wirele [08:23] *wireless [08:24] slicks_mage, BCM4318 is still unstable with bcm43xx drivers :( [08:24] What should I make backups up other than xorg? [08:24] slicks_mage: use ndiswrapper over fwcutter. [08:24] slicks_mage, You can try fwcutter anyway though [08:24] Crustacean-Bob, What are you doing? [08:24] slicks_mage: i have same card and fwcutter has connection problems. it drops off a lot. [08:25] unless wifi radar br [08:25] lol figures owell atleast i got 1thing to work, I tryed installing fwcutter but got an error b4 and how do i use ndiswrapper? i dont mind if it drops off alot lol [08:25] brings it up but it probly doesent [08:25] Just trying to make backups of important files and directories like xorg [08:25] slicks_mage, for fwcutter just sudo apt-get install bcm43xx-fwcutter [08:25] ok 1sec === tovella [n=ktraglin@ool-4579ba05.dyn.optonline.net] has joined #ubuntu [08:26] slicks_mage: there's an excellent post on forums. give me a couple minutes to find it. [08:26] ok np [08:27] cannot connect to my router (wifi) so I tried to connect with ether cable and still no luck [08:27] Gonzoism> You don't see me in other room? === zydbeckham [n=zyd@221.11.4.18] has joined #ubuntu === Qwenty [n=Kahlney@187.Red-83-32-179.dynamicIP.rima-tde.net] has joined #ubuntu [08:27] slicks_mage: try this: http://ubuntuforums.org/showthread.php?t=405990&highlight=bcm4318 [08:27] ummm i got a huge error want me2 paste it or wut? [08:28] ok binmonkey 1sec [08:28] slicks_mage, But try fwcutter anyways, it can't hurt anything and doesn't conflict with ndiswrapper ( though ndiswrapper conflicts with it ) [08:28] crustation-bob /boot/grub/menu.lst, /etc/fstab [08:28] slicks_mage: yes. maybe it'll work well for you. === xoRock [n=xo@69.88.3.113] has joined #ubuntu [08:29] yea jordan i got an error tho so imma try the forum post(s) that binmonkey gave me [08:29] slicks_mage, What error? When? [08:29] does anyone know why i can't read gmail using w3m or lynks? [08:29] ill msg it 2u [08:30] binMonkey, I don't think they support javascript do they? [08:30] crustacean-bob ssl [08:30] oops [08:30] Jordan_U: i don't know. is that required for gmail? [08:30] slicks_mage, Try it again, I just installed it and it worked === Meroigo_ [n=Meroigo@vxj-177-200-233-83.3.cust.bredband2.com] has joined #ubuntu === litral [n=litral@cpe-76-86-31-214.socal.res.rr.com] has joined #ubuntu === blz777 [n=blaze@85.11.167.49] has left #ubuntu ["Kopete] === grlubbb [i=grlubb@c-75-67-72-224.hsd1.ma.comcast.net] has joined #ubuntu [08:31] binMonkey, Yes, they may have an html only page though === Keule|On [n=Miranda@p57BBEE1A.dip.t-dialin.net] has joined #ubuntu [08:31] binMonkey, gmial is actually more javascript than html :) [08:31] is there a text based browser that supports javascript? === dkagedal [n=david@c83-253-22-183.bredband.comhem.se] has joined #ubuntu [08:31] i dig the command line stuff!! [08:31] jordan by sudo apt-get? wut exactly did u type? === zydbeckham [n=zyd@221.11.4.18] has left #ubuntu [] [08:32] slicks_mage, sudo apt-get install bcm43xx-fwcutter === fulio [n=fulio@cpe-76-169-155-191.socal.res.rr.com] has joined #ubuntu [08:33] binMonkey, lynks2 [08:33] jordan wut next? [08:33] elinks === root-s5000 [n=root-s50@190.43.4.208] has joined #ubuntu [08:33] aww, after i have installed kiba-docks none of my desktop effects are working, when i go to settings and go to preferences my desktop effects isnt located === hechu [n=hechu@218.20.48.232] has joined #ubuntu [08:34] slicks_mage, Reboot or run "sudo modprobe bcm43xx" [08:34] slicks_mage, Then you should see light on your card [08:34] k 1sec [08:34] can someone hel me please. === sisko [n=mirko@212.71.197.33] has joined #ubuntu [08:34] !ask | fulio [08:34] fulio: Don't ask to ask a question. Just ask your question :) [08:34] jordan FATAL: Module bcm43x not found. [08:34] fulio, try sudo apt-get install ubuntu-desktop [08:35] has, um, anybody had a problem installing build-essential recently? [08:35] slicks_mage, Did you remove bcm43xx ? [08:35] how can I install kde if I am not connected to the interent === zydbeckham [n=zyd@221.11.4.18] has joined #ubuntu === PrivateUnix51279 [n=flowman4@41.219.222.1] has joined #ubuntu [08:35] jordan i dont think so all i did was sudo apt-get like u said [08:35] krammer: your best bet is probably downloading the kubuntu CD and use it as a repository [08:35] krammer, Use synaptic to make a download script then download the packages from another comp [08:35] cannot connect to my router (wifi) so I tried to connect with ether cable and still no luck [08:35] Jordan_U, its still the same. [08:36] i am trying to figure out my problem [08:36] slicks_mage, I mean earlier, any time since you installed Ubuntu === FredricR [n=FredricR@h23n2fls33o972.telia.com] has joined #ubuntu [08:36] i have no idea i dont think so, should i try2 reinstall or something? [08:37] overclucker: excellent. elinks is great. is it possible to add colored text? [08:37] my desktop effects isnt working it seems like it isnt installed. [08:37] hrm, does anybody find the build-essential package broken? [08:38] slicks_mage, Probably no need, see if you have all the default packages by installing the "ubuntu-desktop" package === GuHhH [n=gustavo@201.56.112.133] has joined #ubuntu [08:38] through synaptic? [08:39] fulio, try running "desktop-effects" from a terminal [08:39] slicks_mage, Yes [08:39] k === Sweet-P [i=Sweet-P@10.sub-70-193-101.myvzw.com] has joined #ubuntu [08:39] debian:/home/gustavo# mount -t vfat /media/mplayer /mnt/teste [08:39] mount: /media/mplayer is not a block device === surface [n=surface@203.115.202.50] has joined #ubuntu [08:39] why that happens? === Evanlec [n=evan@c-75-67-237-157.hsd1.nh.comcast.net] has joined #ubuntu === simplechat [n=wetowne@unaffiliated/simplechat] has joined #ubuntu [08:39] slicks_mage, Wait, did you run "sudo modprobe bcm43xx" or did you only have one x ? [08:39] Im trying to mount a mp3 player device [08:40] how do i boot without the splash screen? so i can see whats wrong [08:40] hey if anyone could take a look at my website and tell me how to improve, I would really appreciate it. http://navetz.com [08:40] GuHhH: you need to mount the a device, like /dev/sda1 [08:40] Jordan_U, i see it and i try to enable it it says ""desktop-effects"" [08:40] i did run it but im unsure if u typed one x or 2 the first time [08:40] Evanlec, Remove the "splash" parameter from the grub menu at boot [08:40] Jordan_U, Failed to execute child process "gtk-window-decorator" (No such file or directory) [08:40] GuHhH: didn't it show up on the desktop when you plugged it in? === andrewkk [n=ak@c-24-16-196-24.hsd1.mn.comcast.net] has joined #ubuntu [08:40] nickrud: what u mean exatcly? [08:40] thats what i did, i hit e, removed the splash and silent, hit enter, and booted === strobedream [n=strobedr@c-76-26-110-21.hsd1.nm.comcast.net] has joined #ubuntu [08:41] but the splash still showed up [08:41] !offtopic | navets_ [08:41] navets_: #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome! [08:41] GuHhH: like mount -t vfat /dev/sda1 /media/mplayer [08:41] nickrud: on "computer", but i click twice and it gives me a lot of errors [08:41] jordan its installed already [08:41] slicks_mage, Wait, did you run "sudo modprobe bcm43xx" or did you only have one x ? [08:41] the ubuntu-desktop === h1st0 [n=histo@h156.112.29.71.ip.alltel.net] has joined #ubuntu [08:41] want me2 try with 2 x's? [08:41] slicks_mage, Yes [08:41] GuHhH: try right clicking it and select unmount [08:41] k [08:41] if anyone uses awn, can you tell me how to get the stack applet working? [08:42] hey I have a question about getting proftpd going. === `LePGeL[BoY] [n=midnitek@203.84.180.178] has joined #ubuntu [08:42] yea i did type one x the first time but still no light yet === fulio [n=fulio@cpe-76-169-155-191.socal.res.rr.com] has joined #ubuntu [08:42] cp: reading `101-punchline-flashlight.mp3': Input/output error [08:42] i juss tryed with 2x's [08:42] Jordan_U, sry i crashed. [08:42] okay, Jordan_U, i'm going to just edit menu.lst directly and remove 'quiet' and 'splash' and reboot [08:43] GuHhH: cp? that's from the terminal; close that terminal, right click and unmount [08:43] nickrud: okay, i mounted it. [08:43] Jordan_U, when i tryd to enable desktop effects it says "Failed to execute child process "gtk-window-decorator" (No such file or directory)" [08:43] nickrud: now im trying to copy files and it gives that error === PJIRCtest_ [n=PJIRCtes@eth5645.nsw.adsl.internode.on.net] has joined #ubuntu [08:43] GuHhH: using the terminal, correct? [08:44] CORRECT@!!!!1 [08:44] nickrud: there only says: "mount", it means its not mounted... but it gives a lot of errors when i try to mount [08:44] nickrud: yes [08:44] YES!!!!!!!!!!!!!!!1 [08:44] YES!!!!!!!!!!!!!!!!!!!! [08:44] GuHhH: lets get on the same page. Right click, and unmount. === krammer [n=krammer@c-66-177-57-246.hsd1.fl.comcast.net] has joined #ubuntu [08:44] slicks_mage, Strange, either try rebooting or just use the forum post for ndiswrapper [08:44] k === PJIRCtest_ [n=PJIRCtes@eth5645.nsw.adsl.internode.on.net] has left #ubuntu [] === RealNitro_ [n=jens@twize.iic.ugent.be] has joined #ubuntu === winbond [n=winbond@c-68-46-102-149.hsd1.pa.comcast.net] has joined #ubuntu === rryan_ [n=rryan@ATRIUS.MIT.EDU] has joined #ubuntu === rpedro [n=rpedro@87-196-46-175.net.novis.pt] has joined #ubuntu [08:47] GuHhH: once it's unmounted, unplug it. We'll start a log of what happens when you plug it back in. [08:47] nickrud: okay, i did [08:47] unplugged? [08:47] yes [08:47] how can i fix this problem - Failed to execute child process "gtk-window-decorator" (No such file or directory) [08:47] GuHhH: ok, open a terminal and type tail -f /var/log/syslog === hechu [n=hechu@218.20.48.232] has joined #ubuntu === matysek [n=matysek@84.Red-83-43-138.dynamicIP.rima-tde.net] has joined #ubuntu === odin_ [n=odin@222.35.87.179] has joined #ubuntu [08:48] fulio, What is the output of "which gtk-window-decorator" === mikebot [n=michaell@ip68-6-118-177.sb.sd.cox.net] has joined #ubuntu === sarower [n=sarower@202.4.103.10] has joined #ubuntu [08:48] hi everybody! [08:48] ehlo [08:49] just introduction...! [08:49] I'm trying to download a file, and the website says to use the command deb http:// ... But ubuntu says it doesn't recognize that command... So what am I supposed to do? === nickrud is surrounded by geeks [08:49] nickrud: no error, apparently... === hechu [n=hechu@218.20.48.232] has joined #ubuntu [08:49] nickrud: Sep 5 00:48:14 debian kernel: sdd: unknown partition table, maybe thats the problem, right? [08:49] GuHhH: there you go. === odin_ [n=odin@222.35.87.179] has left #ubuntu ["Ex-Chat"] [08:49] GuHhH: debian, huh ?:) [08:50] yes. :P [08:50] mikebot, I think you are misunderstanding, you probably aren't downloading a file with your browser, what are you trying to install? [08:50] thats another problem. lol [08:50] GuHhH: you'll probably need to repartition that, if it was a fat [08:50] nickrud: so i will lose my data :( === andruk [n=chatzill@c-67-165-246-61.hsd1.co.comcast.net] has joined #ubuntu [08:51] how can i fix this problem Failed to execute child process "gtk-window-decorator" (No such file or directory) [08:51] thanks for the help, everyone. good night. [08:51] Jordan when running installer-py for the wireless driver i got an error "xmessage: problems reading message file press ctrl+x to close the window" === binMonkey [n=rich1@71-209-137-168.phnx.qwest.net] has left #ubuntu [] [08:51] GuHhH: it may be that your windows box can read it with your players custom software(?), but unknown partition tables are over my head. === kroiz [n=kroiz@212.143.92.226] has joined #ubuntu [08:51] what does -= mean in C++? [08:51] *installer.py === StrongArm [n=slipry@59.188-242-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [08:52] will anyone help me please? === winwinwin [i=DavidHK@unaffiliated/davidhkmrpowers] has joined #ubuntu === rryan_ is now known as rryan === Kai [n=kse@gw1.hosteurope.de] has joined #ubuntu [08:53] nickrud: no, it reads "on the box" ... === kroiz [n=kroiz@212.143.92.226] has left #ubuntu ["Ex-Chat"] [08:53] ? [08:53] nickrud: i dont need any software :P [08:53] oh, you can drop and drag [08:54] okay, i will use my windows... lol [08:54] copy from mp3 player to pen driver... [08:54] GuHhH: crappy hardware. Get a ... I don't even know ;) [08:54] nickrud: Thanks for your help :D [08:54] GuHhH: well, all I did was stop you wasting time, I guess that's a help [08:55] nickrud: yes, yes. i didnt know whats the problem exactly. you helped me, indeed. Thanks! :) [08:55] fulio, type the output of "which gtk-window-decorator" === yjwong|lunch is now known as yjwong === nickrud can't get a stable compiz going on his ati to save his life === mikebot [n=michaell@ip68-6-118-177.sb.sd.cox.net] has left #ubuntu [] === Crustacean-Bob [n=moneyman@cpe-66-67-154-20.rochester.res.rr.com] has left #ubuntu [] === Rat409 [n=greg@bb-205-209-66-178.gwi.net] has joined #ubuntu === vecnah [n=vecna@vecna.vecnix.net] has joined #ubuntu === PrometheusTheSec [n=quant@p57B9FC08.dip.t-dialin.net] has joined #ubuntu === [mR] opt1lc [n=aInkNonZ@125.163.22.17] has joined #ubuntu === PrometheusTheSec [n=quant@p57B9FC08.dip.t-dialin.net] has joined #ubuntu === saeros [n=s43ros@206.207.159.2] has joined #ubuntu [08:58] <[mR] opt1lc> hallo [08:59] hai === AccessExcess [n=axe@82.137.53.201] has joined #ubuntu === Rat409 [n=greg@bb-205-209-66-178.gwi.net] has left #ubuntu [] === shellhack [n=shellhac@tdev147-229.codetel.net.do] has joined #ubuntu === martin_ [i=blutolan@nat/intel/x-9768dc3ac5290639] has joined #ubuntu === Crusher [n=You@ppp121-45-181-168.lns11.adl2.internode.on.net] has joined #ubuntu === dedi [n=dedi@adsl-62-167-25-82.adslplus.ch] has joined #ubuntu [09:02] martin: hello === noxs__ [n=noxs@e178069239.adsl.alicedsl.de] has joined #ubuntu === marine [n=marine@dsl-hvkgw1-fe6ffa00-119.dhcp.inet.fi] has joined #ubuntu === ajones [n=ajones@ppp121-44-228-118.lns2.mel4.internode.on.net] has joined #ubuntu [09:03] erm, I messed up by install a gutsy package [libc6] , and now I can't install build-essential, how can I fix this? === marine [n=marine@dsl-hvkgw1-fe6ffa00-119.dhcp.inet.fi] has left #ubuntu [] [09:03] Kom0dor: oh, oh, you are in deep doo doo [09:03] my usb harddisks dont automount anymore === ajones [n=ajones@ppp121-44-228-118.lns2.mel4.internode.on.net] has joined #ubuntu === Geek_ [n=Geek@cm209.delta20.maxonline.com.sg] has joined #ubuntu === Riddick [n=pm@stefan.xtra.pl] has joined #ubuntu === rat1101 [n=rat1101@pool-71-163-254-224.washdc.fios.verizon.net] has left #ubuntu [] === viviersf [n=cain@gw.impilinux.co.za] has joined #ubuntu [09:04] really? that sucks. I've been trying to figure out what was wrong, but it turns out it's because I have a gutsy package installed. And libc6 was a lame one [09:04] Kom0dor: when you downloaded libc6, did anything else come along? [09:05] well, actually, I was getting a new version of nexuiz, and it needed a new version of libc, it said [09:05] libc6 is about as low level a library you can get, just about everything uses it [09:05] yeah, I looked at uninstalling it :x === kkmaslowski [n=km@cvr178.internetdsl.tpnet.pl] has joined #ubuntu [09:05] <[mR] opt1lc> lol [09:06] Kom0dor: have you ever used the interactive version of aptitude? [09:06] heh, figures, no problems on ubuntu for a year, and then my first one...toasted. [09:06] never used aptitude much, actually [09:06] I usually just apt-get or use synaptic, but I'll look into it right quick === Ricflair [n=chris@ip68-10-85-187.hr.hr.cox.net] has joined #ubuntu === Hobbsee [n=Hobbsee@ubuntu/member/hobbsee] has joined #ubuntu === codi [n=abrar@61.17.193.222] has joined #ubuntu === Caplain [n=shane@adsl-75-45-224-90.dsl.sfldmi.sbcglobal.net] has joined #ubuntu === opt01 [n=opt01@222.124.72.11] has joined #ubuntu === |Lunar_Lamp| [n=Lunar_La@87.114.5.188.plusnet.thn-ag3.dyn.plus.net] has joined #ubuntu === Metal_Militia [n=ioppo@host-84-222-25-68.cust-adsl.tiscali.it] has joined #ubuntu [09:09] Kom0dor: let me know when you have it open === quick_fox [n=wnet@125.163.202.124] has joined #ubuntu === kkmaslowski [n=km@cvr178.internetdsl.tpnet.pl] has left #ubuntu [] [09:09] I have it opened. === Paracha [i=Coder@Is.A.TclCoder.Org] has joined #ubuntu [09:09] man, I have messed up pretty badly === ComunisTico [n=roberto@200.122.159.86] has joined #ubuntu [09:10] Contains the standard libraries that are used by nearly all programs on the [09:10] system. This package includes shared versions of the standard C library and the [09:10] standard math library, as well as many others. [09:10] Kom0dor: ok type llibc6 (this will limit the display to a manageable number of packages) === Kom0dor nods. done. [09:10] now, do you see libc6 and lib6-i686? === marine_ [n=marine@dsl-hvkgw1-fe6ffa00-119.dhcp.inet.fi] has joined #ubuntu [09:11] use the [ and ] keys to open and close the tree === gce [n=someone@c-24-10-80-26.hsd1.ca.comcast.net] has joined #ubuntu [09:11] nod, libc6 is installed, the second one isn't === kahrytan [n=kahrytan@pool-71-176-41-186.nrflva.east.verizon.net] has joined #ubuntu [09:11] ok, hit enter on lib6 [09:11] *libc6 [09:11] done [09:12] now, scroll all the way to the bottom, you should see two libc6 packages mentioned [09:12] [ [09:12] erg, wrong window ;) [09:12] trying to compile a custom kernel and trying to find the option for enabling large block devices i.e config_lbd but I can't find it when i do make menuconfig any idea where it's buried ? [09:12] is there any way, but comparing to original files, to know if my computer was rootkited? [09:13] yes there are two === dime` [n=billgate@CPE-72-135-234-118.wi.res.rr.com] has joined #ubuntu [09:13] Kom0dor: like? [09:13] Kom0dor: ok! now, open another window [09:13] 2.5 and [:c] 2,6 [09:13] lol === KDan [n=KDan@87-194-122-30.bethere.co.uk] has joined #ubuntu [09:13] Kom0dor: a sec [09:13] alright, opened new terminal [09:13] Kk [09:14] Kom0dor: type apt-cache policy libc6 [09:14] libc5: [09:14] Installed: (none) [09:14] Candidate: (none) [09:14] Version table: [09:14] Kom0dor: libc6 [09:14] oops,. typo === multichil [i=multichi@nova.brewery.b33r.net] has joined #ubuntu [09:15] sorry [09:15] heh, I hope so ;) [09:15] god@box:~$ apt-cache policy libc6 [09:15] libc6: [09:15] Installed: 2.6.1-0ubuntu1 [09:15] Candidate: 2.6.1-0ubuntu1 [09:15] Version table: [09:15] *** 2.6.1-0ubuntu1 0 [09:15] 100 /var/lib/dpkg/status [09:15] 2.5-0ubuntu14 0 === bullgard4 [n=detlef@p54BF0775.dip0.t-ipconnect.de] has joined #ubuntu [09:15] 500 http://us.archive.ubuntu.com feisty/main Packages === mikl [n=mikl@pdpc/supporter/active/mikl] has joined #ubuntu [09:15] !paste | Kom0dor [09:15] Kom0dor: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic) [09:15] hrm, sorry, probably should not pasted all that here [09:15] yeah === Cc2iscooL [n=Cc2iscoo@adsl-76-223-195-16.dsl.emhril.sbcglobal.net] has joined #ubuntu [09:15] ok, now back to the other window, and hightlight 2.5-0ubuntu14 [09:16] highlighted. === KDan [n=KDan@87-194-122-30.bethere.co.uk] has joined #ubuntu [09:16] press shift and the + key [09:16] should turn green === Rhoruns [n=Rhoruns@ip68-230-90-30.ph.ph.cox.net] has joined #ubuntu [09:16] it did, and 2.6 turned violet [09:17] ok, press g once, that'll show you the packages to be installed and removed === metsfan47 [n=aaron@c-71-58-49-32.hsd1.pa.comcast.net] has joined #ubuntu === Kom0dor nods, libc6 to be downgraded [09:17] anything red on the screen? === dew [n=dew@c-69-248-63-87.hsd1.nj.comcast.net] has joined #ubuntu [09:18] nope, white/blue/gray [09:18] Evening all [09:18] ok, hit g again to go do it === metsfan47 [n=aaron@c-71-58-49-32.hsd1.pa.comcast.net] has left #ubuntu ["Ex-Chat"] [09:18] nickrud, If red means dependency problems no red might not actually mean no dependency problems with a downgrade [09:19] Jordan_U: no, it'll pick that up. whenever anything is broken, aptitude tells you loudly [09:19] ah, nickrud, thanks for showing me how to do that [09:19] nickrud, But IIRC dpkg does not check dependency problems for downgrades [09:19] so what's the topic this evening? [09:19] nickrud, I thought u were leaving ;p === someothernick [n=someothe@pool-72-85-194-108.bstnma.east.verizon.net] has joined #ubuntu === moversti [n=moversti@212.50.194.167] has joined #ubuntu [09:20] Jordan_U: I used to downgrade stuff from experimental to unstable, and sometimes it took an hour or more to work through all the brokenness. [09:20] could someone confirm that 64-bit LTSP server can be used with 32-bit clients? [09:21] moversti: i don't think there's any reason it shouldn't [09:21] is there any way, but comparing to original files, to know if my computer was rootkited? [09:21] as long as you have a 32bit nfsroot then can boot, sure === Kom0dor [n=god@adsl-217-170-32.bgk.bellsouth.net] has left #ubuntu [] [09:21] s/then/they/ === jano [i=kefiho@nat-mo3.aster.pl] has joined #ubuntu [09:21] b33r- I was writing a bit on that java-package, came to this window to close it and KomOdor caught my eye [09:21] nickrud, Man dpkg , maybe aptitude does it but it seems dpkg alone does not === fulio [n=fulio@cpe-76-169-155-191.socal.res.rr.com] has joined #ubuntu [09:21] an i386 ltsp server also happily services powerpc clients, again provided there is a powerpc kernel and chroot. === jano [i=kefiho@nat-mo3.aster.pl] has left #ubuntu ["Leaving"] [09:22] lol === Gary [n=Gary@colchester-lug/pdpc.supporter.active.Gary] has joined #ubuntu [09:22] is there anyway for me to install kiba-dock with my desktop effects getting messed up? [09:22] anyone knows if it's possible to make roaming profiles in ubuntu ? [09:22] nickrud, I am curious if apt does. [09:22] cafuego: do you have some nice urls to study? === Drunken-Ktulhu [n=max@213.141.151.212] has joined #ubuntu [09:22] <[mR] opt1lc> who can help me? === lr_moogle [n=mog@202.201.12.111] has joined #ubuntu === ferronica [n=tushar@59.176.102.214] has joined #ubuntu [09:23] moversti: not offhand, no. edubuntu docs are probably handu, though === qq [n=ce_15thn@125.164.94.107] has joined #ubuntu === EspenG [n=espen@82.196.212.245] has joined #ubuntu [09:23] Jordan_U: I know, that's why I picked up on aptitude a long time ago. I had been using dselect, for learning dependencies and the like, but aptitude kicked it's butt === grammatrain [n=grammatr@c-24-17-147-183.hsd1.wa.comcast.net] has joined #ubuntu === murrayc [n=murrayc@u25-56.dsl.vianetworks.de] has joined #ubuntu === ericx [n=jxtadev@125.120.98.194] has joined #ubuntu [09:23] !ask | [mR] opt1lc [09:23] [mR] opt1lc: Don't ask to ask a question. Just ask your question :) [09:23] cafuego: ubuntu docs didn't had any build-32bit clients mentioned, some other docs had, when I googled [09:24] .... anyone have a clue as to how to get "show desktop" to ignore certain windows? [09:24] Is there a way to see if i'm using dma or not on my hdd? === albreche [n=amergenc@ANantes-201-1-4-77.w80-15.abo.wanadoo.fr] has joined #ubuntu === taime1 [n=pedro@ip68-102-157-78.ks.ok.cox.net] has joined #ubuntu [09:24] i am using Linsta 0.3 icon theme, how can i replace some icons from it :( [09:24] hi i need help installing awn. [09:24] nickrud, is it normal to use 135MB of swap and only 84 of my RAM? === rausb0 [n=rt2573@silmor.de] has joined #ubuntu === Helmi [n=helmi@pD95ED371.dip.t-dialin.net] has joined #ubuntu [09:24] my usb harddisks dont automount anymore. what could cause that? [09:24] !java > rausb0 [09:24] like Home Folder icon. [09:24] hdparm isn't showing any dma = on or anything and if I try to hdparm -d 1 /dev/sda I get errors [09:25] anyone expriencing low javascript performance in firefox under ubuntu? [09:25] b33r-: it's probably using the rest of your ram as cache, try looking at it with htop (you may need to install it) [09:25] *experiencing* [09:25] Jordan_U: yes, apt does that === jscinoz [n=jscinoz@c220-239-12-203.belrs4.nsw.optusnet.com.au] has joined #ubuntu [09:26] <[mR] opt1lc> you know what "error 18" [09:26] <[mR] opt1lc> in ubuntu === rryan [n=rryan@ATRIUS.MIT.EDU] has joined #ubuntu [09:27] Hmmm I guess not. === qq [n=ce_15thn@125.164.94.107] has joined #ubuntu === Heady [n=heady@adsl-dyn9.91-127-97.t-com.sk] has joined #ubuntu [09:27] nickrud, it shows the same in htop === Prognatus__ [n=irc@147.80-202-51.nextgentel.com] has joined #ubuntu [09:27] i am using Linsta 0.3 icon theme, how can i replace some icons from it :( [09:28] Jordan_U: do u want to "downgrade" to stable? [09:28] b33r-: no other colors in the bar? To be honest, I've never really understood the caching and swapping that the kernel does. It's one of those things I just take on faith [09:29] ferronica, you can find the icon files in ~/.icon/ [09:29] err, sorry, it's ~/.icons/ [09:30] yjwong; i tried under it [09:30] yjwong; and replaced but no effects :( [09:30] hmm, but it doesn't work? [09:30] GuHhH, No, I'm just curious. [09:30] yjwong; scaleable - app [09:30] hmm [09:31] http://www.effi.org/blog/kai-2007-09-05.en.html "Corrupt countries support OOXML" (all surprised hands up) [09:31] like to get PyChart on my ubuntu how do i do that [09:31] How do I check if DMA is enabled? [09:31] yjwong; /home/tushar/.icons/LiNsta-0.3 [09:31] for my icon theme, it is under /scalable/places/user-home.png [09:31] in the icon folder === mon^rch [n=anonymou@S0106000fea33f1bb.cg.shawcable.net] has joined #ubuntu === warbler [n=warbler@202.134.248.211] has joined #ubuntu [09:31] Jordan_U: u can do that editing/creating a file /etc/apt/preferences, and setting differents priorities to each release, the greatest priority number will have priority === overclucker [n=wonton@67-150-218-100.sttl.mdsg-pacwest.com] has joined #ubuntu === gandalfcome [n=wkerzend@mithrandir.anu.edu.au] has joined #ubuntu [09:32] yjwong; do you have any idea [09:33] Is it possible to get the "Show Desktop" button to ignore certain windows? More specifically, a way to keep Screenlets from minimizing? [09:33] Jordan_U: even if its version is newer [09:33] ferronica, i'm not too sure [09:33] GuHhH: what I think of groking preferences is best expressed by your name ;) [09:33] i have two home folder icons: one is the user-home.png, the other is gnome-fs-home.png === visik7 [n=dksakd@unaffiliated/visik7] has joined #ubuntu [09:34] yjwong; i have replaced the icon but no effects :( [09:34] ferronica... are you restarting your computer after you change the icon? Maybe that'll make a difference...? [09:35] yjwong; not yet === u^A_ [n=allberto@124.82.22.168] has joined #ubuntu === chairat [n=chairatk@ppp-124.121.108.180.revip2.asianet.co.th] has joined #ubuntu === kasimon [n=user@62.117.12.81] has joined #ubuntu [09:36] hello :) [09:36] hey kasimon [09:36] how do I create a 6.06 package on etch? pbuilder? [09:37] nickrud: what you mean? i dont speak english as my language :p === ferronica [n=tushar@59.176.102.214] has left #ubuntu ["Ex-Chat"] [09:38] kasimon... hate to say it, I've never done that. [09:38] GuHhH: the only way I know how to say that, is to grunt ;P === mcrea [n=mcrea@88.230.156.115] has joined #ubuntu === danilos [n=danilo@adsl-236-193.eunet.yu] has joined #ubuntu [09:39] ... hmmm [09:39] GuHhH: and to be clear, your nick ;) [09:39] dew: me too ;) my wife has 6.06 on her old thinkpad 600e and I want to create her a backport of lyx 1.5, but at work i have etch on my system === Hit3k_ [n=allan@58.179.134.43] has joined #ubuntu === mcrea [n=mcrea@88.230.156.115] has left #ubuntu ["Vadaaaaaaa"] === Hit3k_ is now known as Hit3k === basix [n=basix__@unaffiliated/basix] has joined #ubuntu [09:39] nickrud: why that? >:( === davina [n=davina@cpc1-sout6-0-0-cust616.sotn.cable.ntl.com] has joined #ubuntu [09:39] kasimon... ah lovely. That really sucks. I wish I could help. My problem seems to be un-solveable.... Lol === ferronica [n=tushar@59.176.102.214] has joined #ubuntu [09:40] BRB === xjkx [n=x@201009107041.user.veloxzone.com.br] has joined #ubuntu [09:40] error 18: selected cylinder excceds maximum suported by bios :< [09:40] GuHhH: no offence meant [09:40] nickrud: why my nick is a problem... tsc... === n0v1_m311n [n=kiosk@125.164.202.43] has joined #ubuntu [09:40] no effect :( === vaxman [n=vaxman@85.65.242.152.dynamic.barak-online.net] has joined #ubuntu [09:40] lol === danielronin [n=ubuntu@24-216-186-158.dhcp.stls.mo.charter.com] has joined #ubuntu [09:41] nickrude: nick is just a nick, what else you expect of it? :P [09:41] oops, nickrud. === vaxman [n=vaxman@85.65.242.152.dynamic.barak-online.net] has left #ubuntu ["Ex-Chat"] [09:42] any one here who can help me regarding icon theme :( [09:42] GuHhH: oh, no, you got it right the first time. That was my nick on the bbs's back in the 80's and, sadly, I lived up to it === zydbeckham [n=zyd@221.11.4.18] has left #ubuntu [] [09:42] Back [09:42] !ask [09:42] Don't ask to ask a question. Just ask your question :) === Dragon64 [n=Dragon64@74-140-65-214.dhcp.insightbb.com] has joined #ubuntu [09:42] oh man after deleting that partition i'm unable to login w/out install cd :( === neosix [n=neosix@212.200.100.204] has joined #ubuntu === wonton_ [n=wonton@66-52-220-2.sttl.mdsg-pacwest.com] has joined #ubuntu [09:43] kasimon... ever worked with Screenlets? === Dragon [n=Dragon64@74-140-65-214.dhcp.insightbb.com] has joined #ubuntu [09:43] i get a grub error at part 1.5 === JosephW__ [n=jircii@pool-72-77-121-14.pitbpa.east.verizon.net] has joined #ubuntu === vaxman [n=vaxman@85.65.242.152.dynamic.barak-online.net] has joined #ubuntu [09:43] thankfully those logs are long gone [09:43] dew, are you using Metacity or Compiz? [09:43] well, any way it's over an hour past the time I shoulda logged off. See you all later === nickrud [n=nickrud_@adsl-69-230-161-27.dsl.irvnca.pacbell.net] has left #ubuntu ["Leaving"] [09:44] I did it! I did it! I installed Ubuntu Linux on a Macbook Pro (first time installing Linux ever)! It's possible! Whoo! (Okay, just wanted to celebrate.) [09:44] yjwong.... I'm using Beryl, actually. [09:44] dew: no, i don't even have an idea what those are === Minty [n=Minty@cdmail4.pck.nerim.net] has joined #ubuntu [09:44] uh, Beryl? Why not use Compiz Fusion? [09:44] JosephW__: \o/ [09:45] if you are using the Show Desktop plugin, there is an option called "Window Types" [09:45] JosephW__: nice! that'll really annoy the fanboys :-) === wAndyw [n=robo@h66-230.rz.fh-offenburg.de] has joined #ubuntu === Crusher [n=You@ppp121-45-38-137.lns10.adl2.internode.on.net] has joined #ubuntu [09:45] Well, I'm a dual-booting fanboy myself. [09:45] I occasionally fancy installing ubuntu on a macbook, but I think I want a smaller, lighter laptop [09:46] ah, ok, I wasn't going to bother with osx at all :-) [09:46] But I just wanted to thank you all and people like you for generating a whole host of user support! === neosix [n=neosix@212.200.100.204] has left #ubuntu ["Kopete] [09:46] Without you people, I wouldn't get to have this 3:46 AM moment of elation. [09:46] lol [09:47] osfameron: i think asus has a few 7 inch systems ;) [09:47] yjwong.... hmmm I don't have the "show desktop" plugin... I've just been using the "show desktop" button in the lower right-hand corner.... I looked in my beryl settings and I don't have that plugin. === Parisi [i=Parisi@pool-71-164-67-4.albyny.east.verizon.net] has joined #ubuntu === constrictor [n=kaning@5accaaa2.bb.sky.com] has joined #ubuntu [09:47] uh [09:47] oh [09:47] then i guess i'm not too sure [09:47] because I've removed the bottom panel entirely :) [09:48] any one here who can help me regarding icon theme :( [09:48] Geek_: ooo, nice. I was thinking of a small thinkpad - not anything smaller than that [09:48] ;) [09:48] yjwong... LoL I gotcha. Well what about with Screenlets, you think there's another way I can work around it? [09:48] thinkpads would be the x series [09:48] is it possible to change the output of my sound, from laptop speakers to phone? === kauer [n=kauer@lochiel-wan-out.nullarbor.com.au] has joined #ubuntu === radu_ [n=radu@89.137.121.161] has joined #ubuntu [09:49] Geek_: yeah, x60s (s to get better battery life, way more important than power. Or the x61s when that comes out) === Geek_ wants the asus eee... 7 inches, 4 mb flash memory, comes with xandros, but i'd probably replace the distro with something apt based [09:49] dew: well, actually I used Compiz Fusion's widget layer [09:49] osfameron: totally agreed. my current 'daily driver' system is a r51 ;) === runrun [n=bobabot1@70-59-143-71.ptld.qwest.net] has joined #ubuntu [09:49] so when i press a key, all the widgets will show up [09:49] yjwong... ah gotcha. === runrun [n=bobabot1@70-59-143-71.ptld.qwest.net] has joined #ubuntu [09:49] normally they are hidden === runrun [n=bobabot1@70-59-143-71.ptld.qwest.net] has left #ubuntu ["Ex-Chat"] === runrun [n=bobabot1@70-59-143-71.ptld.qwest.net] has joined #ubuntu [09:50] yjwong... well I have that option too, got that to work perfectly but it's just the thing for me, ya know? [09:50] i'm trying to get every last drop i can outta this quad core i bought... so, i assume that means running the 64-bit OS, correct?? and what are the disadvantages of running 64-bit, if any? === malnilion [n=malnilio@129.244.177.157] has joined #ubuntu === jetscreamer [n=jetscrea@unaffiliated/jetscreamer] has joined #ubuntu === DarthShrine [n=angus@pdpc/supporter/student/DarthShrine] has joined #ubuntu [09:50] grndslm: 64 bit isn't widely supported, flash won't work, and there's little real advantage on the desktop unless you have > 4gig ram [09:51] here's a question: Is it possible, with GNOME and a single monitor, to have multiple separate desktops and switch between them? The window switcher is good, but all the desktops are the same (same taskbars, same icons etc). === ferronica [n=tushar@59.176.102.214] has left #ubuntu ["Ex-Chat"] === marine_ [n=marine@dsl-hvkgw1-fe6ffa00-119.dhcp.inet.fi] has joined #ubuntu [09:51] Frogzoo: do you know if 64-bit would help out 1080p hd movies?? [09:51] grndslm: a little, not much [09:52] Frogzoo... so, flash & w32codecs needs to be compiled on the machine... and just about everything else should install perfectly fine?? === shunter [n=rxlt@c-98-199-98-135.hsd1.tx.comcast.net] has joined #ubuntu === masterloki [n=mloki@75.80.5.221] has joined #ubuntu [09:53] grndslm: there is no flash for 64 bit === nardine [n=nardine@office.proformatique.com] has joined #ubuntu === EspenG [n=espen@82.196.212.245] has joined #ubuntu [09:53] Frogzoo: soo, nobody with 64-bit uses flash?? i thought there was some way to compile it for 64-bit OSes?? === bruce2015 [n=bruce@c-67-169-107-184.hsd1.ca.comcast.net] has joined #ubuntu === sauvin wonders if it's possible to create a 64 <-> 32 bit thunk layer the way folks used to do it under OS/2 for DOS [09:54] you [09:54] you'd have to use a 32bit firefox with flash === Oriona [n=orion@60.242.57.171] has joined #ubuntu [09:54] is it possible to change the output of my sound, from laptop speakers to headphones? [09:54] uselessid, what do you mean/ [09:54] plug in the headphones?? [09:54] uselessid: plug in the headphones. it should be automatic, on HW level [09:54] but its not :( === shufla [n=shufla@gii66.internetdsl.tpnet.pl] has joined #ubuntu [09:55] buy a new laptop?? === jscinoz [n=jscinoz@c220-239-12-203.belrs4.nsw.optusnet.com.au] has joined #ubuntu [09:55] hello. [09:55] Then you have a hardware issue. === EspenG_ [n=espen@82.196.212.245] has joined #ubuntu === dgjones [n=Cheshire@unaffiliated/dgjones] has joined #Ubuntu [09:56] what kind of virtualisation do you recommend on feisty? until now I used linux-vserver, but "official" support ends on edgy... [09:56] so, i guess there really isn't a point to using 64-bit OS yet. . . [09:56] shufla: vmware === wonton_ is now known as overclucker [09:56] grndslm, there IS a point if you're a pioneer. [09:56] grndslm: why should i do that if the output actually works? === ferronica [n=tushar@59.176.102.214] has joined #ubuntu [09:57] uselessid, u just said the headphone out *didn't* work? [09:57] didn't u? [09:57] where i said that? [09:57] any one here who can help regarding icon ? [09:57] but its not :( [09:57] icon!? the language? [09:57] i just said the pluggin in the headphones, it still playing sound on my speakers [09:58] do you have another OS to make sure it's not a hardware issue? [09:58] *the = that :P [09:58] You sure you're plugging your phones into the HEADPHONE jack? [09:58] grndslm: sure... it works === UB` [n=mik@stargate.fastweb.it] has joined #ubuntu [09:58] im not stupid :( [09:58] well, some folks are === Shufla [n=shufla@gii66.internetdsl.tpnet.pl] has joined #ubuntu === Greyhound- [i=greyhoun@89.44.40.37] has joined #ubuntu [09:59] uselessid, nobody said you ARE, but we've seen some pretty stupid things happen. [09:59] but... linux is a lil weird sometimes and it isn't really the hardware guys that are the st00pit ones === faileas [n=Geek@bb121-7-254-31.singnet.com.sg] has joined #ubuntu [09:59] sauvin: lol, ur ask makes it looks like it :P === guardian [n=Guardian@mar44-1-87-90-32-28.dsl.club-internet.fr] has joined #ubuntu [09:59] !tuttle [09:59] Sorry, I don't know anything about tuttle - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [10:00] Any one here who can help regarding icon ? === NeanT [i=1000@86.121.245.166] has joined #Ubuntu [10:00] ferronica, are you talking about the programming language? === kauer [n=kauer@lochiel-wan-out.nullarbor.com.au] has left #ubuntu [] === shriphani [n=shriphan@219.91.188.167] has joined #ubuntu === gerro [n=logmein@c-68-33-161-50.hsd1.md.comcast.net] has joined #ubuntu === salten [n=salten@82-44-193-144.cable.ubr07.haye.blueyonder.co.uk] has joined #ubuntu [10:01] sauvin: No === MoLE_ [n=chatzill@202.6.149.229] has joined #ubuntu === wAndyw [n=robo@h66-230.rz.fh-offenburg.de] has left #ubuntu [] [10:02] sauvin: i am want to replace some icon from my linsta0.3 [10:02] sauvin: Can you please help me in that ? [10:03] I don't know what "linsta0.3" is. === JackYang [n=chatzill@211.144.127.18] has joined #ubuntu [10:03] :-( === lnq [n=lnq@59.51.253.97] has joined #ubuntu === nightfreak [n=odeiko@zf58c.pia.fu-berlin.de] has joined #ubuntu === Erythro is now known as erythro [10:04] uselessid, why the long face? [10:05] <<< agrees with useless... :( === lnq [n=lnq@59.51.253.97] has joined #ubuntu [10:05] sauvin: ? [10:05] well if its a hardware issue, there ain't anything you can do with any OS === adnans [n=adnans@ip56576f04.direct-adsl.nl] has joined #ubuntu [10:06] Ferronica, I don't know what "linsta0.3" is. [10:06] sauvin: its is a icon theme. [10:07] overclucker: ppl are made me look stupid and im sad about that :-( [10:07] sauvin: i want to replace some icon from it === Crusher [n=You@ppp121-45-9-250.lns10.adl2.internode.on.net] has joined #ubuntu === chainer_ [n=chainer@cpe-76-181-222-119.columbus.res.rr.com] has joined #ubuntu [10:07] I don't know what that is, and apparently don't have it. :( [10:08] sauvin: oh okay === ferronica [n=tushar@59.176.102.214] has left #ubuntu ["Ex-Chat"] === danielronin [n=ubuntu@24-216-186-158.dhcp.stls.mo.charter.com] has joined #ubuntu === sameer_ [n=sameer@86.108.99.223] has joined #ubuntu [10:08] i useKde 3.5 , i have this strange problem , when trying to switch user ubuntu just stalls , is there any one facing the same problem , ? === nahkiss [i=nahkiss@88.195.77.7] has joined #ubuntu [10:08] oops. [10:08] overclucker: i meant: ppl made me look stupid and im sad about that :-( [10:08] :P :( === opt01 [n=opt01@222.124.72.11] has joined #ubuntu [10:09] lol [10:09] :o === giany911 [n=giany911@84.232.210.63] has joined #ubuntu === Scooby12 [n=Miranda@bas10-montreal02-1177582959.dsl.bell.ca] has joined #ubuntu === plukin [n=kai@dslb-088-065-143-152.pools.arcor-ip.net] has joined #ubuntu [10:10] sameer_, I have a similar problem just logging out. It seems THAT part of KDE is a bit wobbly === Scooby12 [n=Miranda@bas10-montreal02-1177582959.dsl.bell.ca] has left #ubuntu [] === lnq [n=lnq@59.51.253.97] has joined #ubuntu [10:10] uselessid, tech support can be hard if you're not actually there to see the problem, === paradigm [n=paradigm@cpe-65-28-244-38.woh.res.rr.com] has joined #ubuntu === kasimon [n=user@62.117.12.81] has left #ubuntu ["ERC] [10:12] sameer_: I have no clue about kde I use xfce === booster_ [n=booster@frtc-fib-dsl-450200.mis.net] has joined #ubuntu === fender__ [n=fender@mail.dropletsap.com] has joined #ubuntu [10:12] sauvin , yes , it happens when looging out , i think i should report this bug , thanks for help === nightfreak [n=odeiko@zf58c.pia.fu-berlin.de] has left #ubuntu ["Ex-Chat"] === Carnage\ [n=carnage@port-87-234-51-211.static.qsc.de] has joined #ubuntu === Bajo [n=Bajo@unaffiliated/bajo] has joined #ubuntu [10:13] hey all [10:13] gerro , do you face any troubles when logging out ? === alex_ [n=alex@111.186.219.87.dynamic.jazztel.es] has joined #ubuntu === antoine [n=antoine@stc92-2-82-235-132-188.fbx.proxad.net] has joined #ubuntu [10:13] I don't think it's a KDE problem, though, at least, not necessarily. I switch users all the time in KDE under Fedora Core, and it works well. === antoine [n=antoine@stc92-2-82-235-132-188.fbx.proxad.net] has left #ubuntu ["Ex-Chat"] === Tidus [n=dontneed@unaffiliated/tidus] has joined #ubuntu === giany911 [n=giany911@84.232.210.63] has joined #ubuntu === ziroda1 [n=ziroday@cm158.kappa176.maxonline.com.sg] has joined #ubuntu === plukin87 [n=kai@dslb-088-065-143-152.pools.arcor-ip.net] has joined #ubuntu === dwa [n=duwial@hq.xs4all.nl] has joined #ubuntu [10:16] can anyone help me with a boot problem? === M1s3k [n=brdi@BSN-77-56-208.static.dsl.siol.net] has joined #ubuntu [10:16] daniel, whats the problem? [10:16] before i was getting a GRUB error at stage 1.5 [10:16] so i loaded the install cd and reinstalled GRUB [10:16] now whatever i try to boot, i get "Error 15: File not found" === shnastybiznastic [n=bas@97.82.195.45] has joined #ubuntu [10:17] danielronin, whick disk do you boot from? (if more than one) === sauvin wonders which file it didn't fine [10:17] damnable firefox memory leak! [10:17] but the boot menu is my altered menu.lst, so i think the images GRUB was pointing to are changed since i made a change to the partition table [10:17] s/fine/find/; [10:17] just 1 [10:18] Hi guys, I was trying to get my printer to work and apparently did something wrong and now all my files are owned by root it seems [10:18] dual boot sata [10:18] i'm on the kubuntu install live cd now [10:18] Metal03, which files are you calling "your files"? [10:18] i can't boot to anything [10:18] except win [10:18] I typed "sudo chown -R root:root *" as stated in here http://ubuntuforums.org/showthread.php?t=341621&highlight=scx-4200 === nerses [n=nerses@ip72-193-117-185.lv.lv.cox.net] has joined #ubuntu [10:19] error 15 file.. mean it can't find grub [10:19] hey [10:19] but no safe-mode, standard 'nix, memtest, anything [10:19] Sauvin : My desktop items for exemple are ALL locked now! [10:19] i'm trying to get iptables to automatically allow all packets to users that have logged in === nerses [n=nerses@ip72-193-117-185.lv.lv.cox.net] has left #ubuntu ["Ex-Chat"] [10:19] danielronin, one disk? [10:19] Mmkay, can you CD into your home directory? [10:19] yes === [nitro] [n=nitro@89.142.155.49] has joined #ubuntu === dawn [n=dawn@tequilla.exist.com] has joined #ubuntu [10:19] sauvin : ya [10:20] can anyone help me with a shell script for log rotation? (i want to remove logs older than 3 days). [10:20] metal03, can you cd into your home directory? === m4v3r1c [n=m4v3r1c_@24-113-108-189.wavecable.com] has joined #ubuntu [10:20] I'm there [10:20] hey? [10:20] Hey [10:20] whuts up [10:20] Mental03, do a sudo chown -R * [10:20] *sighs* [10:20] sameer_: oh I don't have any troubles logging out or switching users === eallais [n=erik@nap13-4-82-240-85-51.fbx.proxad.net] has joined #ubuntu [10:20] is it just an issue of pointing grub to the images on the drive, and if sohow do i do that? === atlas95 [n=atlas@AVelizy-153-1-18-57.w83-199.abo.wanadoo.fr] has joined #ubuntu [10:20] i'm trying to get iptables to allow all packets coming from users logged into ssh [10:20] sameer_: www.xubuntu.org === taime1 [n=pedro@ip68-102-157-78.ks.ok.cox.net] has joined #ubuntu [10:21] ferro , thx a lot [10:21] gerro , thx a lot === Aldo [n=frederic@msgsrv.ville-pau.fr] has joined #ubuntu === Venko [n=sol@colchester-lug/member/Venko] has joined #ubuntu === gerro is now known as ferro [10:21] i just installed a new nvidia geforce 7600 and ubuntu doesnt think it needs restricted drivers...what gives? === Ademan [n=dan@h-67-101-40-146.snfccasy.dynamic.covad.net] has joined #ubuntu [10:21] sameer_: no prob [10:21] i even had to use vesa [10:22] taime1: but it doesnt needs it. [10:23] hey [10:23] MadCaddies: it does need it === otep [n=demo@AP-203.167.31.158.sysads.com] has joined #ubuntu [10:23] hello, i have a freeze after security update of kernel generic 2.6.15 to 2.6.16. it seems uid prb ? may help to reboot new kerbel version ? [10:23] can anyone help or no? ? ? [10:23] taime1: add contrib non-free repositories and download it if u want === flemnos [n=jason@63.74.145.122.ap.yournet.ne.jp] has joined #ubuntu [10:23] I really don't want to reinstall, i have everything updated and patched how i want it. i'd hate to go through that config again [10:23] can anyone in here give me some quik tips on how to get dvd movies to work on ubuntu??? [10:23] i'm trying to find and return whats in the brackets from "node pts/0 2007-09-05 18:11 (10.0.0.3) " [10:23] taime1: sorry, but why does it need it? [10:23] yes, type grub from console === ekun [n=eman@58.65.245.66] has joined #ubuntu === ubuntu [n=ubuntu@ckr12.neoplus.adsl.tpnet.pl] has joined #ubuntu [10:23] MadCaddies: to get 3d support [10:23] i know how to replace things with sed going from one thing to another, but how do i match one part of a regex? [10:24] booster, try to open the DVD in totem - it should prompt you to download the proper (restricted) codecs [10:24] taime1: so, YOU want it, the S.O. doesnt need it. :P [10:24] ok thanks [10:24] sure [10:24] ? === ubuntu [n=ubuntu@ckr12.neoplus.adsl.tpnet.pl] has joined #ubuntu [10:24] hello, i have a freeze after security update of kernel generic 2.6.15 to 2.6.16. it seems uid prb ? may help to reboot new kerbel version ? [10:24] hello, i have a freeze after security update of kernel generic 2.6.15 to 2.6.16. it seems uid prb ? may help to reboot new kernel version ? [10:24] taime1: anyway, add a contrib non-free repository and download nvidia-driver, do you know how to do that? [10:24] Sauvin : Ok, now that this might resolve the issue, think you could help me install the drivers for this printer?? I bought this Samsung SCX-4200 today and haven't been able to make it work since (been a few hours) === cassidy [n=cassidy@host-85-27-68-188.brutele.be] has joined #ubuntu [10:25] Aldo, slow down, just wait and someone will help you. === triske2006 [n=tony@pdx01pncpccgw01.pdx01.inflow.net] has joined #ubuntu === osiris_ [n=osiris@83.229.70.3] has joined #ubuntu [10:25] I know nothing of printer installation under linux :( === neversfelde|mobi [n=neversfe@82.113.121.1] has joined #ubuntu [10:26] Sauvin : Damnit... thanks anyways! [10:26] Can anyone help me get the tty resolution to 1920x1200 in Feisty? === LinAsH [n=missmagu@193.54.76.57] has joined #ubuntu [10:26] Sorry. I don't have a printer. [10:26] does any one know where to dump mysql databases created in windows [10:26] Anyone knows about printers drivers and installation? [10:26] Metal03: what printer r u using [10:27] taime1: sorry, i meant: apt-get install nvidia-glx nvidia-kernel-source [10:27] osiris_, you can't just take mysql database images from one OS and plop them into another. I hope that's not what you're after. [10:27] Osiris : I just bought a bran new Samsung SCX-4200 === Keule|On [n=Miranda@141.45.205.150] has joined #ubuntu === GarethAdams [n=gareth@pdpc/supporter/base/GarethAdams] has joined #ubuntu === warbler [n=warbler@202.134.248.211] has left #ubuntu ["Byyyeee"] === adhek [n=user@125.164.203.133] has joined #ubuntu [10:28] sauvin: ive tried copying the database from one windows system to another and it worked [10:28] osiris: I use a program called full convert to transfer databases from mysql to other formats and vice cersa === nucco [n=fanen@193.219.222.196] has joined #ubuntu [10:28] Osiris_: Ubuntu detects it right but then it doesn't seem to have the drivers for this model! Linux drivers are provided with the printer but they're not in the right format for Ubuntu it seems! [10:29] anyone can help me [10:29] how do i check free disk space on an ubuntu system via the terminal? [10:29] morpheus: i want you to understand me [10:29] From one WINDOWS system to another, yes, but from Windows to Linux, I fear you'd run into binary format incompatibilities. Can you dump SQL? [10:29] how do i install my webcam [10:29] osiris_, http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=us&CttFileID=828690&CDCttType=DR&ModelType=N&ModelName=SCX-4200&VPath=DR/200707/20070720152943906_UnifiedLinuxDriver.tar.gz [10:29] nucco: df -h [10:30] sauvin: thanxs [10:30] osiris: full convert allows you to take a database from SQL<>MYSQL or MYSQL<>MYSQL or many other itterations [10:30] sauvin: worked like a charm :)) [10:30] :) === spacey [n=herman@ubuntu/member/spacey] has joined #ubuntu [10:31] u hapen to know how i can compress a directory with tar, gzip it, and then transfer it via ftp === Tartaros [i=icechat5@r2n127.net.upc.cz] has joined #ubuntu [10:32] morpheus: could you like tell me what to about my database [10:32] Damnit, I used to know that, nucco. Have you looked at info tar? === fredddy [n=freddy@p3E9E00FB.dip0.t-ipconnect.de] has joined #ubuntu [10:32] i need to do that because i don't have enough free disk space, and my gnome's borded [10:32] osiris_: are you using phpmyadmin at all? [10:32] sauvin: i can do the tar and gzip part [10:32] morpheus: no i prefer the manual way [10:32] if you don't have enough free space, you're going to have a REAL crisis during the tar/gzip process. === afterlife [n=afterlif@host11-23-dynamic.5-87-r.retail.telecomitalia.it] has joined #ubuntu === FreeDance [n=joel@CPE-121-220-198-47.sa.bigpond.net.au] has joined #ubuntu [10:33] morpheus: do you think i should create the database all over again then modify my php code [10:33] G'day Folks Does anyone here use beryl? [10:33] freedance... I do [10:33] sauvin: i'm attempting to do the tar/gzip with --remove-files [10:33] every one uses berly === sauvin shuders [10:34] sweet umm you know how by default the windows are red? [10:34] osiris - plenty have moved to compiz fusion [10:34] The ftp part is easy, assuming you have someplace to ftp TO. [10:34] FreeDance - what about it? === afterlife is now known as Stinkfist [10:34] sauvin: yes, i have an ftp server on my local network [10:34] do you know how to change that color? [10:34] yes [10:34] awesome [10:34] And do you have an account on that server? [10:34] how? [10:34] run "emerald" in the console [10:35] sauvin: can i pipe the output of tar/gzip to the ftp? === Stinkfist is now known as afterlife === marcus_ [n=marcus@fw.pakom.net] has joined #ubuntu === Crusher [n=You@ppp121-45-55-62.lns11.adl2.internode.on.net] has joined #ubuntu [10:35] osiris_: if you have the database already then all you need to do is create a new database, export your existing one and import it back in to the new database, you shouldnt have to rebuild it === JayJay27tue [n=daniel@dslb-088-067-021-005.pools.arcor-ip.net] has joined #ubuntu [10:35] stinkfist_: fellow tool fan? [10:35] oh sick [10:35] sauvin: oh my god... tar/gzip just deleted 30GB of my data!!!! [10:35] FreeDance - look for emerald System -> prefrences or System -> Administration === MooDoo [n=root@cpc2-mapp2-0-0-cust377.nott.cable.ntl.com] has joined #ubuntu [10:36] you should be able to configure it there [10:36] And thus my shudder :( [10:36] will that keep my other settings and what not? === jono [n=jono@ubuntu/member/jono] has joined #ubuntu [10:37] Yes, Emerald settings are (for the mostpart) seperate from Beryl settings === bapesitelda [n=bapesite@222.124.16.152] has joined #ubuntu [10:37] If you can't find it under the menu, type this into the console: "emerald-theme-manager -i" === Hideo [n=Hideo@89.129.182.55] has joined #ubuntu === d3ck4_ [n=d3ck4@122.203.23.130] has joined #ubuntu [10:38] i found it === aleX-xx [i=alex@death.si] has joined #ubuntu [10:38] Awesome [10:38] Can anyone help me get the tty resolution to 1920x1200 in Feisty? [10:38] ;( === laurent_ [n=laurent@ip-83-99-98-186.dyn.luxdsl.pt.lu] has joined #ubuntu [10:38] thanks man your a flipping legend ; ) [10:38] Glad to help freedance [10:38] super star ...thanks [10:38] anyone know of any open source network KVM apps, got a linux box and a doze box side by side and cant afford a fancy ass kvm (+I wanna see if there is one about :)) [10:38] JOIN #beryl [10:39] Whoops [10:39] I said that at work just today... "That's flipping AWESOME"... and the folks working with me said "I can't f* believe you just f* said that!" [10:39] sauvin: my free space hasn't increased [10:39] Ok, here's my problem... When I try to run the autorun from that download I get this message : "You are not authorized to install the driver package. Only user with root privileges is allowed to do this." How can I solve that [10:39] ? [10:39] if your free space hasn't increased, where did all your files go? [10:39] i dunno === adhek [n=user@125.164.203.133] has left #ubuntu ["Leaving"] [10:39] one more thing paradigm you know how you can hold your mouse over a window and i comes to the front? [10:39] do you know the default filename that tar uses if you don't supply one? [10:39] Do you have a .tar.gz file? [10:40] beryl overwrote that for me any ideas? [10:40] sauvin : me? === Frogzoo [n=Frogzoo@202.155.165.25] has joined #ubuntu [10:40] i've got a few, but none of them are the right one === askvictor [n=vik@C-59-101-234-125.bur.connect.net.au] has joined #ubuntu [10:40] Um... I'm fraid to ask... what syntax did you use to create your tar file? === ^_uhoh [n=infinity@CPE-70-92-64-28.new.res.rr.com] has joined #ubuntu [10:40] <^_uhoh> Where can I download the latest copy of a magic.mime file? [10:41] sauvin: tar -cfz --remove-files ./Documents === sauvin fears === nucco shrieks [10:42] How can I run this autorun as root? === |triske2006| [n=kvirc@pdx01pncpccgw01.pdx01.inflow.net] has joined #ubuntu === yokomo [n=pacal@68-190-173-3.dhcp.eucl.wi.charter.com] has joined #ubuntu [10:42] Metal - try "sudo autorun" ? [10:42] I did [10:42] try "sudo su", then "autorun"? [10:43] I don't remember ever tarring and zipping in the same command. The tar syntax I use is tar [options] myfile.tar dir_to_tar [10:43] <^_uhoh> I am at http://www.iana.org/assignments/media-types, but I am looking for a copy of magic.mime to download and upload to a webserver. I can't find a link to download. Anyone have any ideas? [10:43] how do I tell if I have OpenGL direct rendering set up right? I have a ATI X1300 card, envy installed === bodkin [n=lam@88-111-92-161.dynamic.dsl.as9105.com] has joined #ubuntu === jscinoz [n=jscinoz@c220-239-12-203.belrs4.nsw.optusnet.com.au] has joined #ubuntu === yarkom [n=yarkom@ekc250.internetdsl.tpnet.pl] has joined #ubuntu === jdownie [n=jdownie@CPE-61-9-147-92.static.vic.bigpond.net.au] has joined #ubuntu [10:43] paradigm : "sudo: must be setuid root" === wildur [n=wildur@1-2-2-8a.spa.sth.bostream.se] has joined #ubuntu [10:44] sauvin: man tar [10:44] nucco, do an ls -a and look for the LATEST timestamped file. MAYBE tar created a file, but I doubt it :( === Opentux [n=sarastro@18-93.3-85.cust.bluewin.ch] has joined #ubuntu === cece [n=kiosk@125.164.202.58] has joined #ubuntu [10:45] yokomo: glxinfo | grep rendering [10:45] paradigm : That was the error message I got "sudo: must be setuid root" [10:45] yokomo, in a normal X server, type "fglrxinfo" (without the quotes) in the Terminal === KomiaPoika [n=prkl@12.75-240-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [10:45] Frogzoo, I just did that; nucco's syntax is *almost* right. [10:45] hi === TylerJGillies [n=tyler@cpe-66-91-11-212.hawaii.res.rr.com] has joined #ubuntu [10:45] sauvin: ok === Gaaston [n=hledoux@18.175-65-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu === nrdb [n=neil@114.196.240.220.dynamic.dsl.comindico.com.au] has joined #ubuntu === Prognatus__ [n=irc@147.80-202-51.nextgentel.com] has joined #ubuntu [10:45] what's the difference between nvidia-glx and nvidia-glx-new? [10:45] how do i apt-get install all packages listed from a ubuntu system using dpkg -l on another system, without typing in the package names one by one? === Joenin [n=nickel@du-028-0023.claranet.co.uk] has joined #ubuntu === cece [n=kiosk@125.164.202.58] has joined #ubuntu === Snick [n=ty@pool-71-176-130-242.hag.east.verizon.net] has joined #ubuntu === Snick is now known as Mr-Snick [10:46] yjwong, all that tells me is that I have OpenGL version string 2.0.6458 (8.36.5) [10:46] ay, is it possible to install aim, on 64bit ubuntu feisty? [10:46] i've managed to install skype32bit.. just havin trouble with aim [10:46] um, sorry, i said the wrong command [10:46] it is "glxinfo | grep rendering" === Lattyware [n=Latty@host86-141-178-214.range86-141.btcentralplus.com] has joined #ubuntu [10:47] if everything is well and working, it should say: direct rendering: Yes [10:47] hrm [10:47] says "No" [10:47] for direct rendering === billybob [n=billybob@75.30.163.165] has joined #ubuntu [10:47] did you disable Composite in xorg.conf? === kai [n=kai@dslb-088-065-143-152.pools.arcor-ip.net] has joined #ubuntu [10:47] Ok, here's my problem... When I try to run the autorun from that download I get this message : "You are not authorized to install the driver package. Only user with root privileges is allowed to do this." How can I solve that? I tried "sudo autorun" and it got me this error message : "udo: must be setuid root" Any ideas? [10:48] sauvin: no luck, even /tmp is empty [10:48] :( [10:48] Xlib: extension "Xfree86-DRI" missing on display ";1.0" [10:48] yjwong, I don't believe I did [10:48] uh, you are running glxinfo under Xgl, yes? [10:48] I think so [10:48] I'm really sorry, nucco - I really wish we could have huddled on the tar syntax before you committed :( === zOap [n=zOap@84.53.35.121] has joined #ubuntu [10:48] I installed compiz [10:48] Metal03: Take a look at this, it should do it for ya: http://ubuntuforums.org/showthread.php?t=219767 [10:48] sauvin: [10:49] yokomo, if compiz would work then everything is well [10:49] weird that it would not come up then [10:49] ok, that's history, how i've got one more folder left, about 35GB, and i've got 5.5G free [10:49] under Xgl direct rendering would always be "no" === Kworth [n=Kworth@dslb-088-065-105-034.pools.arcor-ip.net] has joined #ubuntu === selinuxium [n=james@unaffiliated/selinuxium] has joined #ubuntu [10:49] i've got an ftp server in the local network (100Mb/s) with 30G free [10:49] oh [10:50] My Simple Backup Config Programm doesn't work proper it says: File "/usr/lib/python2.5/ConfigParser.py", line 511, in get [10:50] raise NoSectionError(section) [10:50] ConfigParser.NoSectionError: No section: 'places' [10:50] sauvin: is it possible to ftp the folder across as-is? === amki [n=amki@p50834103.dip.t-dialin.net] has joined #ubuntu [10:50] so, if I want to run games with cedega do I have to turn it on? [10:50] anyone a clue why? [10:50] yokomo, not neccessarily [10:50] oh, ok === [nitroXL] [n=nitro@89.142.154.32] has joined #ubuntu [10:50] you can use DISPLAY=:0 [10:50] Hi all, is there anyway to reset the remote desktop password over ssh? === taime1 [n=pedro@ip68-102-157-78.ks.ok.cox.net] has joined #ubuntu [10:50] DISPLAY=:0 === Mez [n=Mez@ubuntu/member/mez] has joined #ubuntu === Metal03 [n=metal03@bas1-quebec14-1177671606.dsl.bell.ca] has left #ubuntu [] [10:51] can anyone tell me how to ftp an entire folder? === BlueXero [n=crodgers@203-184-39-148.jetbuster.co.nz] has joined #ubuntu === nonic [n=nonic@net210.3vnet.pl] has joined #ubuntu [10:51] Can anyone help me get the tty resolution to 1920x1200 in Feisty? [10:51] nucco, possibly - can you log onto the target machine and wget the folder? === arcnage [n=arcnage@202.58.163.101] has joined #ubuntu [10:51] hi [10:51] wget can upload? [10:51] i installed a new nvidia driver and now i only have one resolution. my xorg file has all possible resolutions listed, i have reconfigured x, and have even tried nvidia-settings, still i have only 800x600... WHY? [10:52] I don't think so. You'd have to log onto the machine you want to move the folder to. [10:52] I'm also assuming your machine will accept a wget request. [10:52] KomiaPoika: dpkg -l | perl -n -e '($a,$b,$c)=split; print "$b\n";' > installed_packages === mccall [n=mccall@cs181111007.pp.htv.fi] has joined #ubuntu === disinterested [n=green@75-164-153-212.ptld.qwest.net] has joined #ubuntu [10:52] sauvin?? a little clearer pls === Simpsoid [n=dave@c220-239-66-94.rochd3.qld.optusnet.com.au] has joined #ubuntu === BlueXero [n=crodgers@203-184-39-148.jetbuster.co.nz] has joined #ubuntu [10:52] taimel, when you change nvidia-settings, did you save to x.org? === jetscreamer is now known as jetlaw [10:52] i've got apache on my local machine (i hope it's still in order) [10:52] KomiaPoika: then on the other computer run apt-get install `cat installed_packages` [10:52] You're on machine A. You want to put the directory on machine B. Log onto machine B and wget the folder on machine A. [10:53] sauvin: i have to have either ftp or http on machine A === BlueXero [n=cameron@203-184-39-148.jetbuster.co.nz] has joined #ubuntu === FreeDance [n=joel@CPE-121-220-198-47.sa.bigpond.net.au] has joined #ubuntu [10:53] hey guys im back [10:53] besides, machine B is windows :( (office) === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu === u^A_ is now known as u^A [10:53] can anyone help me with a shell script for log rotation? (i want to remove logs older than 3 days). [10:53] How deep is your folder's hierarchy? === shriphani [n=shriphan@219.91.188.167] has joined #ubuntu [10:54] MadCaddies: man find [10:54] sauvin: quite complicated: it was the samba share [10:54] sauvin, making it accessible via http shouldn't be too difficult... [10:54] nucco, the folks on #linux will probably have a better idea how to accomplish this kind of task. [10:54] im usin beryl and in system.windows on my desktop i can make it so if i hold my mouse over a window i pops infront but beryl has stoped this any ideas? === wildur [n=wildur@1-2-2-8a.spa.sth.bostream.se] has joined #ubuntu === nucco executes /join #linux === BlueXero [n=crodgers@203-184-39-148.jetbuster.co.nz] has joined #ubuntu === buddyluv [n=buddyluv@adsl-074-236-251-002.sip.owb.bellsouth.net] has joined #ubuntu === xoRock [n=xo@69.88.3.113] has joined #ubuntu [10:56] nucco: you need to ftp via command line? [10:56] askvictor: now that's elite command line, thanks a lot [10:56] askvictor: i've got ftp, but i don't know how to ftp an entire directory === Mgk [n=mgk@AMarseille-153-1-42-24.w86-197.abo.wanadoo.fr] has joined #ubuntu [10:56] askvictor, he has a complex directory structure that needs to move from machine A to machine B, which is apparently a Windows machine. === Markos [i=markl@CPE000ec6b59478-CM001225dba2fe.cpe.net.cable.rogers.com] has joined #ubuntu [10:57] FreeDance, near where you got to emerald config there should be a beryl config [10:57] the windows machine has an ftp server on it, and i have rw access === dennis__ [n=dennis@p57A57DBB.dip.t-dialin.net] has joined #ubuntu [10:57] there's an option in there for raise on mouse over [10:57] hiho [10:57] nucco: ncftp should be able to do it [10:57] in beryl? [10:58] what's the difference between nvidia-glx and nvidia-glx-new? [10:58] FreeDance, yeah === pecisk [n=pecisk@78.84.123.94] has joined #ubuntu [10:58] askvictor, lemme see if i got that [10:58] awesome === NeanT [i=1000@86.121.245.166] has joined #Ubuntu [10:58] do you know where it is? [10:58] askvictor: :( i don't have ncftp [10:59] and my dpkg is borked as well [10:59] In Compiz Fusion, its under general options -> Focus & Raise Behaviour. Not sure exactly where it is on Beryl, I haven't used it in quite some time. [10:59] nucco: can't install it [10:59] nucco:? [10:59] askvictor: i've only got nc, and ncal [10:59] Does the Synaptics package manager work? [10:59] lemme see if i can wget, ./configure ... [11:00] sauvin: i haven't got a functioning Xserver [11:00] oh man you really are a superstar [11:00] nucco: are you trying to download from a remote ftp server or upload to it? [11:00] thanks heaps === quick_fox [n=wnet@125.163.202.124] has joined #ubuntu [11:00] found it [11:00] Sure thing [11:00] heya! where do I download xbuntu? === [nitro] [n=nitro@89.142.154.32] has joined #ubuntu === gvsa123 [n=girard@125.60.241.233] has joined #ubuntu [11:01] brown-cat - the cd to install fresh, or to move from a current ubuntu install? [11:01] askvictor, he's trying to upload an entire directory structure. [11:01] askvictor: i'm trying to upload to it, and i only got a terminal === triske2006 [n=tony@pdx01pncpccgw01.pdx01.inflow.net] has joined #ubuntu === sini|work [n=thisISno@212.105.205.50] has joined #ubuntu [11:01] does anyone know of a decent video editing program? [11:02] paradigm: I have the ubuntu CD but it is not installing fast - it has been going for over 24 hours - I currently have ms windows 2000 pro and can wipe it === BlueXero [n=crodgers@203-184-39-148.jetbuster.co.nz] has joined #ubuntu === xoRock [n=xo@69.88.3.113] has joined #ubuntu [11:02] FreeDance: avidemux and kino? === desti [n=desti@p5B01AC3A.dip0.t-ipconnect.de] has joined #ubuntu [11:02] nucco: how about zipping or tar.gz'ing the directory tree, uploading it, and asking the other end to unzip it? === InfectedC0 [n=Infected@253.Red-83-51-86.dynamicIP.rima-tde.net] has joined #ubuntu === Zdra [n=zdra@251.248-242-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [11:03] askvictor: i just lost 30G attempting to tar/gzip on a system with not enough free space [11:03] brown_cat: did you try here? http://www.xubuntu.org/get#feisty === kahrytan [n=kahrytan@pool-71-176-41-186.nrflva.east.verizon.net] has joined #ubuntu === Telep [n=telep@a81-197-164-45.elisa-laajakaista.fi] has joined #ubuntu [11:03] gvsa123>are they as good as adobe prem? ( if youve ever used it?) [11:04] askvictor: if you can provide a way of tar/gzipping then piping it thru ftp... [11:04] Hi all, is there anyway to reset the remote desktop password over ssh? [11:04] paradigm: mhm - i selected the aussie mirror but, there are loads of different links :s === montsegur [n=compilog@LAubervilliers-153-51-31-152.w193-253.abo.wanadoo.fr] has joined #ubuntu [11:04] FreeDance, Whats the ques [11:04] FreeDance: nope never used it. i'm a home user so simple editing works for me... [11:04] kahrytan: video editing [11:04] yeah === stdin [i=stdin@pdpc/supporter/active/stdin] has joined #ubuntu === triske2006 [n=triske20@pdx01pncpccgw01.pdx01.inflow.net] has joined #ubuntu [11:04] brown_cat: do you know what processor you have? [11:04] There is no good video editing on linux [11:04] ok cool [11:04] lol ok [11:04] will there ever be? [11:05] paradigm: IBM thinkpad :s probably intel [11:05] soon as there is im flipping leaving windows lol [11:05] brown_cat: Try burning this to a disk: http://mirror.internode.on.net/pub/ubuntu/xubuntu/7.04/release/xubuntu-7.04-alternate-i386.iso [11:05] kk [11:05] brown_cat: wait, wrong one === Nickem [n=nick@24.29.243.191] has joined #ubuntu [11:05] FreeDance, but we got Graphics and 3d programs [11:05] brown_cat: this one: http://mirror.internode.on.net/pub/ubuntu/xubuntu/7.04/release/xubuntu-7.04-desktop-i386.iso [11:06] thanks :DD can I use usb or do I have to burn to cd? [11:06] brown_cat its a lot easier to burn to a cd. CD-RW's are fine [11:06] kk ;D [11:06] FreeDance, the best one in myopinion is avidemux [11:06] thanks :DD [11:06] brown_cat: if the second link I gave you doesn't work, try the first one [11:06] kk :DD === ari_stress [n=tiger74@125.161.198.30] has joined #ubuntu === hhlp [n=hhlp@126.Red-83-55-228.dynamicIP.rima-tde.net] has joined #ubuntu === rdav [n=ask@19.20.233.220.exetel.com.au] has joined #ubuntu === rdav [n=ask@19.20.233.220.exetel.com.au] has left #ubuntu ["Leaving"] === tom17bombadil [n=tross@T9f17.t.pppool.de] has joined #ubuntu [11:07] Anyone know how to get the tty resolution to 1920x1200? [11:07] FreeDance, blender.org for 3d stuff [11:07] nucco: you can't just tar/zip into /tmp then upload that file? [11:07] yeah i got all those [11:07] too easy thanks heaps guys === throvold [n=throvold@cpc1-leic7-0-0-cust242.lei3.cable.ntl.com] has joined #ubuntu === triske2006 [n=triske20@pdx01pncpccgw01.pdx01.inflow.net] has joined #ubuntu [11:08] rock on .keep on keeping on : ) [11:08] paradigm: also, can I upgrade from kbuntu to ubuntu later? [11:08] askvictor: my entire filesystem is on / on a single drive with only 5.5G free [11:08] i just did a reboot -n now === Aldo [n=frederic@msgsrv.ville-pau.fr] has joined #ubuntu === kalis_bliumkvist [n=patrimpa@ctv-213-164-102-136.vinita.lt] has joined #ubuntu [11:09] brown_cat: yes, look for "ubuntu-desktop" in syanptic [11:09] kk, thanks :D [11:09] Newbee question - looking for advise on loading Java programs like SDK, Java 3D, Net Beans, etc? [11:09] i installed a new nvidia driver and now i only have one resolution. my xorg file has all possible resolutions listed, i have reconfigured x, and have even tried nvidia-settings, still i have only 800x600... What gives? [11:09] hi, gutsy on laptop asus A6T freeze with (I386) kernel 2.6.22 at 13.808000 2.6 USB HID core drive. === triske2006 [n=triske20@pdx01pncpccgw01.pdx01.inflow.net] has joined #ubuntu [11:10] tailmel: did you "save to x config" in nvidia-settings? [11:10] nucco: you could try 'mkfifo /tmp/pipe.tar.gz; tar czf /tmp/pipe.tar.gz /dir/to/transfer &' then ftp /tmp/pipe.tar.gz to your new host === love [n=love@124.114.203.163] has joined #ubuntu === kompressor [n=kompress@gw.impilinux.co.za] has joined #ubuntu === MistaED [n=mistaed@87.212.233.220.exetel.com.au] has joined #ubuntu [11:11] askvictor: pls remind me how to redirect stdin? === BlueXero [n=cameron@203-184-39-148.jetbuster.co.nz] has joined #ubuntu === winwinwin [i=DavidHK@unaffiliated/davidhkmrpowers] has joined #ubuntu === Nickem [n=nick@24.29.243.191] has left #ubuntu [] [11:12] nucco: it's not redirecting. [11:12] taimel: did you "save to x config" in nvidia-settings? [11:13] nvidia-settings tells me i only have 800x600 [11:13] Well I'm out of here. [11:13] I'll have to come back later today... maybe somewhere out there, someone knows my answer [11:13] askvictor: the fifo will get full because i'm putting about 30g into it, on a disk with only 5.5g free, so it has to be a process that occurs simultaneously [11:13] nucco: app < file [11:13] i want to download some video-streams; they are not meant to be downloaded - there is no link to download, but just to watch. what tool is there to save it to disc nevertheless? [11:14] taimel: Try running nvidia-settings like this: "sudo /usr/bin/nvidia-settings" [11:14] Frogzoo: thx === sebastian_ [n=sebastia@83.230.233.90] has joined #ubuntu === abhibera [n=abhi@125.99.124.150] has joined #ubuntu [11:14] kahrytan: kino is only for importing dv? while avidemux is better at the actual editing? === mcrea [n=mcrea@88.230.156.115] has joined #ubuntu === mcrea [n=mcrea@88.230.156.115] has left #ubuntu ["Vadaaaaaaa"] [11:14] nucco: it is; the fifo is a pipe which will only accept more input once the buffer has been cleared. It's just like a | pipe, but it exists on the filesystem. === UB` [n=mik@stargate.fastweb.it] has joined #ubuntu === KermitFree [n=KermitFr@adsl-221-27.38-151.net24.it] has joined #ubuntu [11:15] still shows me that i only have 800x600 === LinAsH [n=missmagu@193.54.76.57] has joined #ubuntu === meEET [n=me@c-68-54-116-100.hsd1.in.comcast.net] has joined #ubuntu === xerosis [n=kieran@proxy.salfordsoftware.co.uk] has joined #ubuntu [11:15] is desktop search going to be good in gutsy? [11:15] any sound people about? === Sn00p_ [n=fv@80.172.27.123] has joined #ubuntu [11:16] askvictor: ok. thx. i'll save this transcript. need to step out now, try it as soon as i get back. [11:16] taimel: what monitor do you have? [11:16] its a dell [11:16] thx Sauvin, Frogzoo [11:16] I tried. === ss [n=oranye@125.164.252.24] has joined #ubuntu [11:16] does the name show up under "GPU 0" in nvidia-settings? [11:16] (this was fine until i upgraded the nvidia driver for my newer card i installed today) === viviersf [n=cain@gw.impilinux.co.za] has joined #ubuntu === platius [n=platius@24.182.213.78] has joined #ubuntu [11:17] xerosis, what is your problem? [11:17] taimel: For instance on my setup, under GPU 0, it shows "DFP-1 - (DELL 2407WFP)" - whats it say for you? === reflous [i=reflous@lost.in.space.by.nasa-gov.com] has joined #ubuntu [11:17] paradigm: it lists my monitor as @@@(crt1) === HauDyr [n=kim@wnn29252.wireless.dtu.dk] has joined #ubuntu === HauDyr [n=kim@wnn29252.wireless.dtu.dk] has left #ubuntu ["Leaving"] [11:17] is it better to use nvidia-glx-new over nvidia-glx if both support my card? The restricted drivers manager install nvidia-glx by default. [11:17] zyth: trying to get a usb headset working, aplay works but nothing else === KermitFree [n=KermitFr@adsl-221-27.38-151.net24.it] has joined #ubuntu === tB [n=vodka@202.57.178.77] has joined #ubuntu === buaksamolurum [n=evri2@88.240.181.196] has joined #ubuntu [11:18] xerosis, ooh. usb headset :S [11:18] taimel: see if you can find your exact monitor name for me [11:18] its in my xorg file hang on [11:18] zyth: i know :p === magical_trevsky [n=magical@host81-149-185-161.in-addr.btopenworld.com] has joined #ubuntu [11:18] xerosis, what kind? [11:19] er, JPL comms? whoever they are === SunWuKung [i=SunWuKun@S01060016cbc4c705.vc.shawcable.net] has joined #ubuntu === constrictor [n=constric@82-70-24-5.dsl.in-addr.zen.co.uk] has joined #ubuntu [11:20] xerosis, hangon a sec [11:20] paradigm: DELL P991 === never|mobi [n=neversfe@mue-88-130-118-042.dsl.tropolys.de] has joined #ubuntu === ss [n=oranye@125.164.252.24] has joined #ubuntu === rpedro [n=rpedro@87-196-46-175.net.novis.pt] has joined #ubuntu === jsk [n=jonathan@client-86-27-168-83.popl.adsl.virgin.net] has joined #ubuntu [11:21] taimel: There's code for an EDID on this page. copy and save it somewhere, then give that to nvidia-settings under your monitor under GPU 0. http://www.laptopvideo2go.com/forum/lofiversion/index.php?t307.html === shaqie_lee [n=b-net@222.124.160.2] has joined #ubuntu [11:21] gk [11:21] paradigm: there is no where to enter that in [11:21] xerosis, have you tried 'sudo modprobe snd-usb-audio' ? === Captain_Inferno8 [n=Bushsuck@adsl-074-166-214-206.sip.bct.bellsouth.net] has joined #ubuntu [11:22] taimel: under GPU 0, the tab that has your monitor's (messed up) name. there should be a button called "Acquire EDID" [11:22] i see [11:22] taimel: the EDID basically tells it the stats of your monitor, including the correct supported resolutions === triske2006 [n=triske20@pdx01pncpccgw01.pdx01.inflow.net] has joined #ubuntu === jscinoz [n=jscinoz@c220-239-12-203.belrs4.nsw.optusnet.com.au] has joined #ubuntu === KermitFree [n=KermitFr@adsl-221-27.38-151.net24.it] has joined #ubuntu === Gener1c [n=Generic@DSL217-132-218-172.bb.netvision.net.il] has joined #ubuntu === KermitFree [n=KermitFr@adsl-221-27.38-151.net24.it] has joined #ubuntu [11:25] taimel: I gotta go, hope that helps. Once you got nvidia recognizing your monitor witht he right EDID, it should give you the correct options for resolutions. It didn't recognize my SyncMaster 712n either, tahts what I did to fix it === dexem [n=dani@14.Red-88-26-177.staticIP.rima-tde.net] has joined #ubuntu === mariafo [n=mariafo@83.230.233.10] has joined #ubuntu === lidia [n=lidia@83.230.233.10] has joined #ubuntu === dystopianray [n=dystopia@203-213-54-54-syd-ts2-2600.tpgi.com.au] has joined #ubuntu [11:26] zyth: no luck === AndyM [n=amorris@cmarfw01.marlow.spinvox.com] has joined #ubuntu [11:26] zyth: i wouldn't have asked if it didn't work with aplay, that just leads me to think it might be possible === Tech-Mike [n=tech-mik@71-223-242-92.phnx.qwest.net] has joined #ubuntu [11:26] xerosis, yeah... you've checked alsamixer to make sure it isnt muted, etc? [11:27] sup peeps, need to know how i can get read-write access to my windows partitions (dual boot) with ubuntu (amd64) [11:27] Tech-Mike, sudo apt-get install ntfs-3g [11:27] coo coo, thx [11:28] Tech-Mike: install ntfs-config [11:28] np [11:28] dystopianray may be right though [11:28] !ntfs-3g [11:28] ntfs-3g is a Linux driver which allows read/write access to NTFS partitions. Installation instructions at https://help.ubuntu.com/community/MountingWindowsPartitions === sen3 [n=sen@ha.customer.antwerpen.belnet.net] has joined #ubuntu [11:28] ntfs-config allows easy configuration of ntfs-3g [11:28] there ya go :) === chinasky [n=jose@84.76.79.242] has joined #ubuntu === Petrus [n=poliveir@adonis.iportalmais.pt] has joined #ubuntu [11:28] ^^^ === chinasky [n=jose@84.76.79.242] has left #ubuntu [] === Crusher [n=You@ppp121-45-175-62.lns11.adl2.internode.on.net] has joined #ubuntu === Jordan_U [n=Jordan_U@h-68-164-241-29.snvacaid.dynamic.covad.net] has joined #ubuntu === realnewguy [n=xen@ip-58-28-153-202.ubs-dsl.xnet.co.nz] has joined #ubuntu === gord [n=gord@5ac7eaad.bb.sky.com] has joined #ubuntu [11:30] hey guys i installed a theme and i have to move a file from my desktop to /etc/firefox/profile, but i need permission to do so, what command would i have to use? === triske2006 [n=tony@pdx01pncpccgw01.pdx01.inflow.net] has joined #ubuntu [11:31] ...do i need libntfs-3g0 [11:31] Tech-Mike: just install ntfs-config, it'll pull in everything it needs === Aldo [n=frederic@msgsrv.ville-pau.fr] has joined #ubuntu [11:31] realnewguy: can't you install themes locally? [11:31] !ntfs-3g | Tech-Mike [11:31] Tech-Mike: ntfs-3g is a Linux driver which allows read/write access to NTFS partitions. Installation instructions at https://help.ubuntu.com/community/MountingWindowsPartitions [11:32] well its sorta tricky [11:32] i have to put something into the firefox folder [11:32] realnewguy, mv and sudo [11:32] ahh ok ty [11:32] realnewguy: why can't you install it into your user's firefox config? [11:32] realnewguy, For security you should chown them to root also === tschaka [n=tschaka@p54B3A7C8.dip0.t-ipconnect.de] has joined #ubuntu === thuyvy_nguyen031 [n=thuyvy_n@222.253.90.17] has joined #ubuntu === dkagedal [n=david@oden.vtab.com] has joined #ubuntu === massiMaltese [n=massimil@host-84-220-43-105.cust-adsl.tiscali.it] has joined #ubuntu [11:33] because when i try to cut and paste with the gui, it just doesnt let me [11:33] dystopianray, Makes a good point though === hechw [n=hechu@218.20.48.232] has joined #ubuntu [11:33] realnewguy: normal users can't write to /etc === capiira [n=capiira@dslb-088-065-195-103.pools.arcor-ip.net] has joined #Ubuntu [11:33] realnewguy, There is a profile for all users in /etc and another just for your user in ~/ [11:33] ciao === mbah [n=wnet@125.163.202.124] has joined #ubuntu [11:34] realnewguy, You can change anything in your home folder === lick_me_f [i=Whore_19@78.128.37.98] has joined #ubuntu === FirsT_SuRvivoR [n=evri2@88.243.34.117] has joined #ubuntu === taime1 [n=pedro@ip68-102-157-78.ks.ok.cox.net] has joined #ubuntu === halekin [n=ubuntu@p54A9E562.dip.t-dialin.net] has joined #ubuntu [11:34] but the firefox directory isnt in my home folder [11:34] its in /etc/firefox [11:34] realnewguy: ~/.mozilla/firefox === halekin [n=ubuntu@p54A9E562.dip.t-dialin.net] has joined #ubuntu === linuxfool [n=linuxfoo@222.85.126.211] has joined #ubuntu [11:35] after installing nvidia driver, i have only 800x600 resolution. what can i do to fix this? [11:35] im at / now and i dont see mozilla === qazibasit [n=qazibasi@116.71.26.51] has joined #ubuntu [11:35] realnewguy: / is not your home directory === bonsai [n=bonsai@201.47.68.211.adsl.gvt.net.br] has joined #ubuntu [11:35] the only thing in "home" is the name of my desktop :S === neozen [n=neozen@c-71-228-16-126.hsd1.il.comcast.net] has joined #ubuntu [11:35] ok...installed ntfs-config, ran: sudo ntfs-config, it opend and had 2 check options: enable ntfs write for internal/external devices...checked both, pressed ok, it remounted but still have no write [11:35] realnewguy: anything prefixed with '.' is hidden by default, manually browse to ~/.mozilla/ === thuyvy_nguyen031 [n=thuyvy_n@222.253.90.17] has left #ubuntu [] [11:36] oh cool, it worked, thanks ! :) === lick_me_f hi to all! How are you today? :) [11:37] ok...installed ntfs-config, ran: sudo ntfs-config, it opend and had 2 check options: enable ntfs write for internal/external devices...checked both, pressed ok, it remounted but still have no write [11:37] realnewguy: application configuration for users is always put into a ~/.* directory/file, which are hidden by default [11:38] ah ok, would it be safe for me to unhide these files by default? [11:38] or is it better to keep them hidden? [11:38] as im very inexperiencd with linux === clay [n=m@213-140-16-184.fastres.net] has joined #ubuntu [11:38] realnewguy: there is little reason to view hidden files all the time [11:39] canale italian [11:39] kk [11:39] I say again... ok...installed ntfs-config, ran: sudo ntfs-config, it opend and had 2 check options: enable ntfs write for internal/external devices...checked both, pressed ok, it remounted but still have no write [11:39] Tech-Mike: we heard you the first time two times, have some patience [11:39] channel italian [11:39] srz === stickto [n=stickto@222.64.79.248] has joined #ubuntu [11:40] !it | clay [11:40] clay: Vai su #ubuntu-it o su #kubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! === Sn00p_ [n=fv@80.172.27.123] has joined #ubuntu === TylerJGillies [n=tyler@66-233-95-194.mau.clearwire-dns.net] has joined #ubuntu === kalis_bliumkvist [n=patrimpa@ctv-213-164-102-136.vinita.lt] has joined #ubuntu === giany911 [n=giany911@84.232.210.63] has joined #ubuntu [11:42] zyth: i can only see my other sound card in alsamixer [11:42] http://vans.tbc.bg/uploaded [11:42] xerosis, odd :S === Flegma [n=Michalek@devil.spacecom.cz] has joined #ubuntu === Martinp23 [n=martinp2@wikimedia/Martinp23] has joined #ubuntu === Weiss [i=taw27@pip.srcf.societies.cam.ac.uk] has joined #ubuntu [11:44] does ubuntu work well with external HDDs ? I'm thinking of buying Packard Bell "Store and Save 3500" 500GB === Paddy_EIRE [n=patrick@84.13.126.88] has joined #ubuntu [11:45] Greyhound-, you want to boot from external HDD or just mount and use one ? === lr_moogle [n=mog@202.201.12.111] has left #ubuntu [] [11:45] just mount and use it [11:45] Greyhound-: it should work without issue === digg [n=pelny@rohum6.pu.kielce.pl] has joined #ubuntu === Le-Chuck_ITA [n=Le-Chuck@dhcp-131-114-3-79.di.unipi.it] has joined #ubuntu [11:45] Greyhound-, then go ahead, it works fine [11:45] thanks :D === Le-Chuck_ITA [n=Le-Chuck@dhcp-131-114-3-79.di.unipi.it] has left #ubuntu ["Leaving."] === insane_alien [n=stephen@cpc1-john1-0-0-cust155.renf.cable.ntl.com] has joined #ubuntu === sauvin is using a couple of external drives with no problem under ubuntu === jxxxt [n=john@203-217-0-222.dyn.iinet.net.au] has joined #ubuntu === davefloyd [n=rebel@s5593edbe.adsl.wanadoo.nl] has joined #ubuntu [11:47] sauvin, I've no problem with two external drives. [11:47] an external usb hdd is no different to a usb pen drive or similar, except significantly larger === Biohazard [i=mahdi@blfd-4db5146d.pool.einsundeins.de] has joined #ubuntu [11:47] What kinds of problems? [11:48] dystopianray, that's not strictly true. pen drives don't sleep. [11:48] hey guys...i nedd to figure out how to enable dvd's to play in unbuntu [11:48] sauvin: i don't think that is visible to the OS though, is it? [11:49] It can be when you have no means of sending it 'WAKE UP, BIZZATCH!' signal. [11:49] booster_: sudo apt-get install libdvdread3 [11:49] Hi all, is there anyway to reset the remote desktop password over ssh? [11:49] booster_: sudo /usr/share/doc/libdvdread3/install-css.sh === giany911 [n=giany911@84.232.210.63] has joined #ubuntu === sarastro_w_m [n=sarastro@18-93.3-85.cust.bluewin.ch] has joined #ubuntu [11:50] sauvin: don't the external drive electronics handle that though? === h1st0 [n=gentoo@h156.112.29.71.ip.alltel.net] has joined #ubuntu === lick_me_f Take a look at this! It's cool. http://vans.tbc.bg/uploaded === realnewguy [n=xen@ip-58-28-153-202.ubs-dsl.xnet.co.nz] has left #ubuntu [] === lick_me_f Take a look at this! It's cool. http://vans.tbc.bg/uploaded [11:51] Is the system monitor network traffic in Kilobytes or bits? [11:51] dystopianray, I have a Western Digital "My Book" that sleeps; I have no way of waking it up when that happens, except to unplug its power, plug it back in and actually actively pmount it. [11:51] It says Ki/B === macsim [n=macsim@LSt-Amand-152-32-31-103.w82-127.abo.wanadoo.fr] has joined #ubuntu === AutumnCat [n=AutumnCa@59.41.108.142] has joined #ubuntu [11:51] sauvin: sounds like a bug in usb controller hardware on the device [11:52] h1st0: bytes, then. [11:52] It may be. I'm having ZERO trouble with the Seagate. === TimeTraveller [n=danny@81-233-99-247-no76.tbcn.telia.com] has joined #ubuntu [11:52] B == bytes, b == bits === teee [n=vodka@202.57.178.77] has joined #ubuntu === neur1 [n=Guest@udp094183uds.hawaiiantel.net] has joined #ubuntu === ubuntu_ [n=ubuntu@CPE-124-177-144-120.qld.bigpond.net.au] has joined #ubuntu === giany911 [n=giany911@84.232.210.63] has joined #ubuntu [11:52] SlimeyPete, ty [11:52] (well, I think it, too, sleeps and leaves something in an indeterminate state because it "loses" whole directories until you pumount it, fsck it and pmount it again) === fqh [n=root@219.131.238.46] has joined #ubuntu === u^A [n=allberto@60.53.38.206] has joined #ubuntu === neur1 [n=Guest@udp094183uds.hawaiiantel.net] has left #ubuntu [] === kkmaslowsk1 [n=km@cvr178.internetdsl.tpnet.pl] has joined #ubuntu === BigZbig [n=zbiggy@ear185.neoplus.adsl.tpnet.pl] has joined #ubuntu === visof [n=visof@41.232.39.90] has joined #ubuntu === aseyrk [n=chatzill@cobol.fiz-chemie.de] has joined #ubuntu === hk4711 [n=hk4711@89-186-149-194.dynamic.primacom.net] has joined #ubuntu === Arcad3z [n=adg@81.196.174.146] has joined #ubuntu === gutts [i=gutts@ADijon-258-1-39-245.w90-6.abo.wanadoo.fr] has joined #ubuntu === dystopianray [n=dystopia@203-213-54-54-syd-ts2-2600.tpgi.com.au] has left #ubuntu ["Kopete] === Heady [n=heady@adsl-dyn9.91-127-97.t-com.sk] has joined #ubuntu === skarta [n=skarta@89.136.243.187] has joined #ubuntu [11:58] hi === triske2006 [n=tony@pdx01pncpccgw01.pdx01.inflow.net] has joined #ubuntu [11:58] ho wdo i completely exit the X server [11:59] i need to install an nvidia driver [11:59] anyone? === chelo77 [n=chelo@c-c6e772d5.041-56-73746f37.cust.bredbandsbolaget.se] has joined #ubuntu === gyaresu [n=gyaresu@ppp121-44-223-200.lns1.hba1.internode.on.net] has joined #ubuntu === mbah [n=wnet@125.163.202.124] has joined #ubuntu [12:00] please? === gutts [n=gutts@ADijon-258-1-39-245.w90-6.abo.wanadoo.fr] has joined #ubuntu [12:00] EtZzzzzzzzzzzzzz [12:00] helo [12:00] hi === quick_fox [n=wnet@125.163.202.124] has joined #ubuntu [12:00] mbah === teee is now known as gong-Gong [12:01] how do i exit the X server? === Antix [n=nathan@62.72.103.193] has joined #ubuntu === Antix [n=nathan@62.72.103.193] has left #ubuntu ["Ex-Chat"] === zyth [n=zyth@wnpgmb06dc1-0-52.dynamic.mts.net] has joined #Ubuntu [12:01] need help with my cordless multimedia keyboard === lick_me_f Just take a look at this car! AMAZING!!! http://vans.tbc.bg/uploaded === gutts [i=gutts@ADijon-258-1-39-245.w90-6.abo.wanadoo.fr] has joined #ubuntu === estrella [n=estrella@83.230.234.245] has joined #ubuntu === Arcad3 [n=adg@81.196.174.146] has joined #ubuntu === SaSaT [n=katuyung@202.87.247.154] has joined #ubuntu [12:03] my keyboard is : Ione Scorpius-P20 USB Cordless [12:04] English help wanted: What does it mean to 'assert a bit in a status register'? Is there another word here for 'to assert'? === faileas [n=Geek@cm209.delta20.maxonline.com.sg] has joined #ubuntu === exoduso [n=exoduso@client-82-2-49-0.brnt.adsl.virgin.net] has joined #ubuntu === amio [i=amio@gkk171.internetdsl.tpnet.pl] has joined #ubuntu === SaSaT [n=katuyung@202.87.247.154] has joined #ubuntu === RikkitProff [n=rikkit@77.50.89.24] has joined #ubuntu [12:04] t [12:04] hi [12:05] hi [12:05] first is it the ubuntu room? === Yodude [n=youssef@63-216-113-117.sdsl.cais.net] has joined #ubuntu === gcostello [n=gcostell@i07v-212-195-160-152.d4.club-internet.fr] has joined #ubuntu [12:05] it should be :) [12:05] wuld like to get some help please from an expert [12:05] !ask | amio [12:05] amio: Don't ask to ask a question. Just ask your question :) [12:05] I am new to ubuntu ( I have little basic knowledge though) [12:05] amio: Just ask! === efkan [n=efkan@chello062178057155.20.11.univie.teleweb.at] has joined #ubuntu [12:05] the thing is with the internet connection [12:05] bullgard4: "set" possibly? [12:05] Hello, i want to acces a folder on my Ubuntu PC from a window laptop, i installed Samba and NFS sharing, and i added the folder to my shared folders list, but how do i access it from windows ? [12:06] can not establish it till now === maxwolf [n=maxwolf@66.183.7.193] has joined #ubuntu === sharket [n=dunno@modemcable115.50-200-24.mc.videotron.ca] has joined #ubuntu [12:06] I am talking from another pc with windows thought [12:06] I have on the other c a wiless adapter [12:06] what version of Ubuntu you use? [12:06] amio> [12:06] what kinda internet connection amio ? [12:06] and when I tryto connect to the net it asks me to put the passphare number so I do === At0mic_PC [n=arch_ato@host-216-77-192-11.jan.bellsouth.net] has joined #ubuntu === francois_fon [n=francois@sev93-4-82-242-17-76.fbx.proxad.net] has joined #ubuntu [12:07] hey guys, i'm trying to install an update alsa. the module now loads with "sudo modprobe snd-hda-intel model=3stack-6ch" and can be seen with lsmod, however "asoundconf list" returns no available cards. Any ideas anyone? [12:07] i need help connecting an ubuntu machine to windows plz [12:07] wirless with belkin server based on DEBIAN SERVER [12:07] is the belkin wifi setup supported on ubuntu? === phoochka [n=phoochka@122.169.33.54] has joined #ubuntu === matteoit81 [n=matteo@82.91.233.151] has joined #ubuntu [12:08] hi all === lick_me_f Just take a look at this car! AMAZING!!! http://vans.tbc.bg/uploaded [12:08] amio> i newer tryed wireless net so i hope someone else can help you with that [12:08] i want to acces a folder on my Ubuntu PC from a window laptop, i installed Samba and NFS sharing, and i added the folder to my shared folders list, but how do i access it from windows ? [12:08] well as I see I think its working [12:08] amio: and is it WEP or WPA? === desti [n=desti@p5B01AC3A.dip0.t-ipconnect.de] has joined #ubuntu [12:08] anyone knows how to solve the problem "nfsmount: need a path" using ltsp?? [12:08] beacsue i see this: when I try to go to the connection area on ubuntu [12:09] I see its asking me: [12:09] !ops | lick_me_f spammer [12:09] lick_me_f spammer: Help! Mez, LjL, elkbuntu, imbrandon, DBO, gnomefreak, Hobbsee, rob, ompaul, Madpilot, Burgundavia, Seveas, CarlK, crimsun, ajmitch, tritium, Nalioth, thoreauputic, apokryphos, tonyyarusso, PriceChild, Amaranth, jrib, jenda, nixternal, Myrtti, mneptok or Pici [12:09] you want to connect to wired or wirless? [12:09] I choose wireless [12:09] Yodude>Why not try with TihgtVNC? just easyer i think === mode/#ubuntu [+o gnomefreak] by ChanServ === mode/#ubuntu [+b *!*@78.128.37.98] by gnomefreak === lick_me_f [i=Whore_19@78.128.37.98] has left #ubuntu [requested] === mode/#ubuntu [-o gnomefreak] by gnomefreak === Scooby12 [n=Miranda@bas10-montreal02-1177582959.dsl.bell.ca] has joined #ubuntu === TheZanke [n=thezanke@74-132-182-250.dhcp.insightbb.com] has joined #ubuntu [12:09] and near it I see the sign with green color on the middle this means it receives something like connection [12:09] then [12:09] when i try to click it === gyaresu [n=gyaresu@ppp121-44-223-200.lns1.hba1.internode.on.net] has joined #ubuntu === viviersf [n=cain@gw.impilinux.co.za] has joined #ubuntu [12:10] it asks me for the kind I choose 64 kb as it is my main server connection [12:10] then asks me for the code which is 10 dgits === merc_ [n=merc@c-68-84-185-96.hsd1.mi.comcast.net] has joined #ubuntu [12:10] chelo77: no i need to setup a network, do you know how i can do that plz ? === eljo__ [n=johannes@p57ADCA54.dip.t-dialin.net] has joined #ubuntu [12:10] i click connect then it keeps searching === Kjellson [n=kjellson@81-234-251-89-no20.tbcn.telia.com] has joined #ubuntu [12:10] then it says only connected to sired in time I dont have any cable connected to the wired connection [12:11] does XChat allow multiple server connections? I can't tell.. [12:11] thats all [12:11] so any help? [12:11] Yodude: ok you need to copy and move files in Ubuntu from your Windows comp? [12:11] nvm, i got it === _uplinkd_ [n=nikk@adsl-69-210-134-79.dsl.milwwi.ameritech.net] has joined #ubuntu [12:12] by te way I failed to estabish connection to the internet while installing ubuntu on the pc === _uplinkd_ [n=nikk@adsl-69-210-134-79.dsl.milwwi.ameritech.net] has left #ubuntu ["Leaving"] [12:12] then I choosed to leave it then install later [12:12] chelo77: yes === linuxfool [n=linuxfoo@222.85.126.211] has joined #ubuntu [12:12] why cant i get a res higher than 800x600??? === afterlife [n=afterlif@host11-23-dynamic.5-87-r.retail.telecomitalia.it] has joined #ubuntu [12:13] you have an nvidia? === Nwanko13832 [n=13832@235.Red-80-24-113.staticIP.rima-tde.net] has joined #ubuntu [12:13] an OLD nvidia? === croppa [n=stuart@135.27.233.220.exetel.com.au] has joined #ubuntu [12:13] any one read what I have written here ? [12:13] I wish I get some helptp cpnnect [12:13] connect [12:13] neozen: yes, sorry im falling asleep [12:14] yay! AMD revamped their drivers :D === neozen starts @ the beginnning [12:14] just a sec amio... I'll take a look === neosix [n=neosix@212.200.100.200] has joined #ubuntu [12:14] its a new nvidia === afterlife [n=afterlif@host11-23-dynamic.5-87-r.retail.telecomitalia.it] has left #ubuntu ["Sto] [12:14] ok neozen [12:14] Yodude: Why not try with FilezillaFTP server on Ubuntu then you login from Windows with Mozilla or some WebBrowser instead? === jhaig [n=joseph@195.11.98.194] has joined #ubuntu === EspenG [n=espen@uio-8021x-176-0-25-40.uio.no] has joined #ubuntu [12:15] chelo77: man i just wanna, is it possible to set up a network between my ubutu and the windows laptop ?! i need to do just that === animimotus [n=animimot@unaffiliated/animimotus] has joined #ubuntu [12:15] hello people!!! [12:15] Yodude: yeah its possible [12:16] hoallo neosix [12:16] neozen: is it so hard ?! if not then please tell me how ! and plz let it be in a GUI way === ArPharazon [n=amo@203.78.221.48] has joined #ubuntu [12:16] Yodude: no... its not so hard === gong-Gong is now known as GonG_GonG === Prowler_1 [n=kanotix@82.166.57.1] has joined #ubuntu [12:17] Yodude: easiest way ever is install openssh-server on the ubuntu box === d3ck4_ [n=d3ck4@222.216.88.208] has joined #ubuntu [12:17] Yodude: then get a file-transfer client that supports ssh2 on the windows box [12:17] winscp, (even filezilla might do it) [12:18] after restart ubuntu turn into > edubuntu -WTF??? [12:18] neozen: can't i do it using just samba ? i think that's easier === felipe [n=felipe@my.nada.kth.se] has joined #ubuntu [12:18] !samba [12:18] samba is is the way to cooperate with Windows environments. Links with more info: https://wiki.ubuntu.com/MountWindowsSharesPermanently and http://help.ubuntu.com/ubuntu/serverguide/C/windows-networking.html - Samba can be administered via the web with SWAT [12:18] ................ [12:18] not for me... [12:18] I found it.... evil [12:18] but I'm not everyone [12:18] samba's usually the easiest way [12:18] its the BEST way no doubt [12:19] personally I do it via CLI (force of habit) but I believe there's a GUI tool in ubuntu somewhere === neozen salutes SlimeyPete [12:19] neozen nothing so far? [12:19] well.. when I get that samba itch one of these days I'll be sure to ask you [12:19] after restart ubuntu turn into > edubuntu ? === renzo17 [n=chatzill@dhcp-198-025.chem.soton.ac.uk] has joined #ubuntu [12:20] amio: what kind of card do you have? === shinwaa [n=marius@82.117.37.22] has joined #ubuntu === gyaresu [n=gyaresu@ppp121-44-223-200.lns1.hba1.internode.on.net] has left #ubuntu [] === ArPharazon [n=amo@203.78.221.48] has left #ubuntu [] [12:22] neo zen you mean the adapter? well all what I know is that : its wirless lan 511g [12:22] the thing is I can receieve signal from the server and its written 39% === shinao1 [n=shinao1@196.207.1.30] has joined #ubuntu [12:23] 511g? === Shay_cyber5482 [n=ufrijfd@CBL212-235-2-65.bb.netvision.net.il] has joined #ubuntu === neozen shrugs [12:23] so I think the driver is known [12:23] hello all [12:23] I mean known by ubuntu system === kdxx [n=kdxx@64-121-75-71.c3-0.sfrn-ubr1.sfrn.ca.cable.rcn.com] has joined #ubuntu [12:24] broadcoms are notorious for letting you see all the local networks.. even letting you click on them, but never actually letting you connect [12:24] at least... they used to be... perhaps that's changed w/ the drivers in feisty/gutsy === jboss [n=pahari@203.129.255.178] has joined #ubuntu === neozen goes off to google 511g === esimon [n=esimon@194.51.71.190] has joined #ubuntu === esimon [n=esimon@194.51.71.190] has left #ubuntu ["Ex-Chat"] === neosix [n=neosix@212.200.100.200] has joined #ubuntu === brown_cat [n=chatzill@124-168-80-40.dyn.iinet.net.au] has joined #ubuntu [12:25] GAH!!!! === zyth [n=zyth@wnpgmb06dc1-0-52.dynamic.mts.net] has joined #Ubuntu [12:25] neozen, can you help me with a broadcom wireless??? [12:26] jxxxt: not right now unfortunately, have to throw self in shower === SirJonAl [n=jo@d54C55021.access.telenet.be] has joined #ubuntu [12:26] takes a bit of time === sahin_h [n=ezaz@dsl5400DBA4.pool.t-online.hu] has joined #ubuntu [12:26] there are many here who can help you though [12:26] neozen, OK I will try catch you again some time all the best [12:26] jxxxt: what's the problem? [12:27] i am facing problems in ubuntu 7* network installation...when i am giving local repo. path it is showing release file missing [12:27] neozen, setting up the bcm43xx cutter and firmware [12:27] the same process was working fine with ubuntu 5.1 distro.. === Carolet [n=fans@60.213.45.175] has joined #ubuntu [12:27] neozen, on amd64 bit arch === Juki_ [n=juki@88.193.14.135] has joined #ubuntu [12:28] neozen are you getting something please? === Carolet [n=fans@60.213.45.175] has left #ubuntu [""] === sipior [n=sipior@jop56.nfra.nl] has joined #ubuntu [12:28] amio: well, its either a netgear, or an asmax [12:28] ok neo zen i made it with my little knowledge [12:29] just I went to settings and tried to make the connection manually then all what I did is I choosed web hex put the password then choosed connection with dhcp then ok === plukin [n=kai@dslb-088-065-143-152.pools.arcor-ip.net] has joined #ubuntu [12:29] neosix, sorry did not read you nick properly I am trying to get bcm43xx cutter and firm ware to work on amd 64 [12:29] well it was asmax i think but never mind I made it [12:29] GOOOOD [12:30] lol === Noiano [n=noiano@lugbari/people/noiano] has joined #ubuntu [12:30] hello [12:30] neoen help me with the next question please [12:30] about beryl [12:30] jxxxt: hmmm, sorry I can help you. [12:30] can't [12:30] just wanted to know beryl is the only desktop with 3D effects? [12:30] or there is a new one? [12:30] how do I remove "orca screen reader and magnifier" ? gtk accessibility module has something to do with orca? [12:30] amio: compiz, compiz-fusion .... xfce [12:30] neosix, OK thanks for asking any how :-) [12:31] OK === Kopfgeldjaeger [n=nicolai@p54AD554F.dip.t-dialin.net] has joined #ubuntu [12:31] amio: oh wait... you said 3d effects [12:31] what comes regularly with ubuntu 7.4? [12:31] amio: scratch xfce [12:31] is there anybody who did network installation with ubuntu 7* [12:31] amio: only has transparency effects (which still look great by themselves imho) [12:31] amio: nothing === GonG_GonG [n=vodka@202.57.178.77] has left #ubuntu ["Ex-Chat"] [12:32] amio: in the 3d effects area anyway... you have to add compiz or beryl [12:32] hi [12:32] well i would like to install the most nice desktop with 3D effects the thing is I tried to put beryl and I had many troubles that I needed to reinstall ubuntu again on the hdd [12:32] amio: common problem, ask in #beryl or #ubuntu-effects [12:33] just beryl didnt load automaticly and when I tried to edit sources.list or lets say this file which I dont remember its name in x11 I couldnt start ubuntu any more [12:33] ok thanks man I will search there [12:33] thanks any way for the help [12:33] amio: glad to be of service [12:33] bye === CorpseFeeder [n=mouser@ppp121-45-225-250.lns1.bne4.internode.on.net] has joined #ubuntu === biggahed [n=biggahed@189.25.2.1] has joined #ubuntu === psyalex [n=alex@p549A6D88.dip.t-dialin.net] has joined #ubuntu [12:34] someone plz can help me ? i have computer with ubunto , before few weeks i added new drive (westren digital 500 gb) , each time i booting the computer and want to access my new drive i have to enter my password (mount) how can i automatic mount for this drive ? === Arcad3 [n=Arcad3@81.196.174.146] has joined #ubuntu [12:35] Shay_cyber5482: you have to automount it by editing your fstab file [12:35] !fstab [12:35] The /etc/fstab file indicates how drive partitions are to be used or otherwise integrated into the file system. See http://www.tuxfiles.org/linuxhelp/fstab.html and !Partitions === Iacobus [n=francisc@212.145.173.174] has joined #ubuntu [12:36] thanks :) === rokey [n=rokey@61.134.11.251] has joined #ubuntu [12:36] Shay_cyber5482: there are plenty of guides on the ubutu wiki, forums etc === psyalex [n=alex@p549A6D88.dip.t-dialin.net] has left #ubuntu ["Ex-Chat"] === Howitzer [n=sagara@37.212-64-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu === AlexC_ [n=alex@host217-43-16-102.range217-43.btcentralplus.com] has joined #ubuntu [12:36] Hey guys, [12:37] Ion Scorpious-P20 wireless USB keyboard problem.Cannot get it work is someone in here who have same problem or even bether answer how to get it work :)? === Arcad3 [n=Arcad3@81.196.174.146] has joined #ubuntu [12:37] hello buddy === moDumass [n=evilsher@203-214-28-167.dyn.iinet.net.au] has joined #ubuntu === Ar-Pharazon [n=arpharaz@88.233.244.35] has joined #ubuntu [12:37] I'm wondering where gPHPEdit stores it's settings. There is nothing in ~/.gphpedit and nothing in gconf-editor for it, no /etc/gphpedit or anything [12:37] does u guys have Anti-virus software in linux? [12:37] there is no need, rokey === GonG_GonG_ [n=vodka@202.57.178.77] has joined #ubuntu === noxs_ [n=noxs@e178091086.adsl.alicedsl.de] has joined #ubuntu [12:37] hey all, so i have a copy of google earth installed, but id like to update to the newest version. how do i do this? [12:37] rokey: there is clam-av === GonG_GonG_ [n=vodka@202.57.178.77] has left #ubuntu ["Ex-Chat"] === Ar-Pharazon [n=arpharaz@88.233.244.35] has left #ubuntu [] [12:38] rokey: but thats really only used to scan win files stored on a linux server etc [12:38] Can anyone here recommend a good laptop model which "fully" supports Ubuntu and includes a compatible wireless-g card, or provide me with a link where I can see recommended/tested laptops? === f0rqu3 [n=f0rqu3@unaffiliated/f0rqu3] has joined #ubuntu [12:38] rokey: no antivirus software [12:38] CorpseFeeder: system76 [12:38] how do you edit file associations in ubuntu === |Element| [n=Element@116.215.161.1] has joined #ubuntu [12:38] neozen [12:38] f0rqu3: right click on the file and play with the "open with" options in properties [12:38] amio: yes? [12:39] AlexC what is system76? Who makes that? [12:39] no one answers on the ages which you have given me I mean the rooms [12:39] !virus | rokey [12:39] rokey: A/V software is available, however read this to understand why Linux does not have a virus problem: http://librenix.com/?inode=21 === troughton [n=troughto@host-87-75-150-183.bulldogdsl.com] has joined #ubuntu [12:39] CorpseFeeder: System76 is the company, google it [12:39] so is there any sugustins? [12:39] renzo17, right but I need to change lots of them [12:39] AlexC ok. thanks. [12:39] CorpseFeeder, Do not get a laptop with a "sis" graphics in it.. [12:39] you're welcome, === fully223 [n=james@60-242-87-230.static.tpgi.com.au] has joined #ubuntu [12:39] sigutions [12:39] trying to replace all gedit associations to scite [12:39] f0rqu3: lots of files or lots of file "types"??? [12:39] file types [12:40] amio: its 5:30am here in chicago... which makes it 6:30am on the east coast of the us.... ...no other rooms on freenode move as fast as this one... === suupaabaka [n=suupaaba@202.134.248.89] has joined #ubuntu === linuxfool [n=linuxfoo@218.28.164.2] has joined #ubuntu === Iacobus [n=francisc@212.145.173.174] has left #ubuntu ["Saliendo"] [12:40] amio: and its still quite early === Kopfgeldjaeger [n=nicolai@p54AD554F.dip.t-dialin.net] has joined #ubuntu [12:40] aha [12:40] is there any other place? === GonG_GonG_ [n=vodka@202.57.178.77] has joined #ubuntu [12:40] because here is 12:40 pm in europe [12:40] :) [12:40] amio, what help do you want with? [12:40] ubotu: reading [12:40] Sorry, I don't know anything about reading - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [12:40] it is 6:40 here :) [12:40] f0rqu3: well when you do it for one file "type" it will automatically do the same for all files with that same extension.......................so only have to do it once for each type........but not sure of another way of doing it [12:41] er... PM [12:41] with installing beryl or compiz [12:41] amio: look @ the faq for the #beryl room [12:41] why not choose Compiz Fusion? === Carolet [n=fans@60.213.45.175] has joined #ubuntu === star [n=star@221.4.250.202] has joined #ubuntu [12:41] amio: or the #ubuntu-effects room [12:41] Beryl is still supported, but is discontinued [12:41] yjwong: heard baaaad things about compiz fusion === Filthpig [n=carl@ti0010a380-1453.bb.online.no] has joined #ubuntu [12:41] bad things? [12:41] o_o [12:41] ok if compiz fusion has 3D effects then why not? just the thing is I already read some pages about berl which made me know something [12:41] yjwong: crashes frequently on my buddy's system [12:41] me does not have such problems [12:42] i use compiz-fusion .. [12:42] neozen, some plugins are defective [12:42] yjwong: ahh [12:42] and unstable [12:42] welll.... yeah [12:42] did it ever make it out of beta? [12:42] neozen I am already there but no one answers netiehr beryl nor effects room === winwinwin [i=DavidHK@unaffiliated/davidhkmrpowers] has joined #ubuntu [12:42] amio: patience is a virtue === Noiano [n=noiano@lugbari/people/noiano] has left #ubuntu ["Leaving"] [12:42] amio, first of all, what graphics card do you have? === jboss [n=pahari@203.129.255.178] has left #ubuntu ["Leaving"] === Kayde [n=kayde@d58-110-219-122.rdl4.qld.optusnet.com.au] has joined #ubuntu [12:43] well thats good question i dont know yet let m go to the other c and check [12:43] Does anybody know about the possibility of using i.e. a laptop with ubuntu as a navigational tool on the sea? === f0rqu3 [n=f0rqu3@unaffiliated/f0rqu3] has left #ubuntu ["Leaving"] [12:43] yjyong how to check it from ubuntu system by the way> [12:43] ? [12:43] amio: people rarely get paid to monitor these rooms and help people, so sometimes there's quite a bit of lag between question and response === KenSentMe [n=jeroen@kensentme.xs4all.nl] has joined #ubuntu [12:43] ubotu, got that [12:43] Sorry, I don't know anything about got that - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [12:44] I'm wondering where gPHPEdit stores it's settings. There is nothing in ~/.gphpedit and nothing in gconf-editor for it, no /etc/gphpedit or anything [12:44] amio: if you can do it the Terminal way, use lspci === alcoholic [n=wickedso@61.159.70.202.dynamic.max.com.pk] has joined #ubuntu [12:44] Hiya guys, I need help installing java runtime environment on Mozilla firefox! any help - ima TOTAL newb. [12:44] then do [12:44] !paste [12:44] pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic) [12:44] amio: you can shake down your pci bus for information about the things connected to it at any time by using lspic [12:44] *lspci [12:44] lol === keito [n=keito@cpc2-leed2-0-0-cust11.leed.cable.ntl.com] has joined #ubuntu [12:44] haha :) [12:44] that's a typo [12:44] !java | Kayde [12:44] Kayde: To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository. Enable the backports repository on Edgy to install sun-java6-jre [12:44] I found the System76 main site. They only ship in US and Canada... Does anyone know if they have a supplier in Australia? === star [n=star@221.4.250.202] has joined #ubuntu [12:44] Ion Scorpious-P20 wireless USB keyboard problem.Cannot get it work is someone in here who have same problem or even bether answer how to get it work :)? [12:44] Kayde: install sun-java6-plugin and it will automaticly be used in ff [12:45] i cant run in root === Jagix [n=Jagix@bob75-1-81-57-9-113.fbx.proxad.net] has joined #ubuntu [12:45] gnomefreak: umm, how? [12:45] fully223: sure you can.... just sudo === dwa [n=duwial@hq.xs4all.nl] has joined #ubuntu [12:45] !sudo [12:45] sudo is a command to run programs with superuser privileges ("root"). Look at https://help.ubuntu.com/community/RootSudo for all information. [12:45] hold o guys you are talking to me like I would be an expert in linux its my third day or 4th using it even not so much [12:45] Kayde: sudo apt-get install sun-java6-plugin [12:45] gnomefreak: and what is ff? [12:45] so what is the ispci? === chelo77 [n=chelo@c-c6e772d5.041-56-73746f37.cust.bredbandsbolaget.se] has joined #ubuntu [12:45] aww.... they changed the message for sudo === Nozy [n=michael@cust6243.vic01.dataco.com.au] has joined #ubuntu [12:45] Kayde: make sure you have multiverse repo enabled [12:45] hi all [12:45] ff == firefox [12:45] !spoon [12:45] Sorry, I don't know anything about spoon - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi === mylogic [n=matt@mylogic.net] has joined #ubuntu [12:46] amio, go to Accessories -> Terminal, type lspci, then hit Enter/Return === neozen shrugs [12:46] amio: lspci? [12:46] there is no spoon..... === DenysLins [n=denys@189.13.234.224] has joined #ubuntu [12:46] then post the output here: http://paste.ubuntu-nl.org [12:46] k I will brb [12:46] gnomefreak: what is that?? === Tha-Fox_ [n=akijahei@dyn-sparknet-utu.utu.fi] has joined #ubuntu [12:46] now i cant access user and groups [12:46] :( [12:46] !multiverse | Kayde [12:46] Kayde: The packages in Ubuntu are divided into several sections. More information at https://help.ubuntu.com/community/Repositories and http://www.ubuntu.com/ubuntu/components - See also !EasySource [12:46] newbie day [12:46] Kayde: lspci shakes down your pc's bus for information about devices connected to it... [12:47] Kayde: please read that and do as they say === sfrizzell [n=sfrizzel@rrcs-70-62-192-30.central.biz.rr.com] has joined #ubuntu [12:47] i will try! [12:47] is there !lspci? [12:47] now i cant access user and groups [12:47] !lspci [12:47] Sorry, I don't know anything about lspci - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [12:47] yjwong: nope [12:47] i cant access user and groups [12:47] yjwong: but there should be [12:47] hmm [12:47] agree === attunix [n=patrick@c-71-203-10-234.hsd1.fl.comcast.net] has joined #ubuntu === mrigns [n=mrigns@unaffiliated/mrigns] has joined #ubuntu [12:47] fully223, try "sudo users-admin" (without the quotes) from a Terminal [12:48] CorpseFeeder, This link may help you http://www.geekosophical.net/?cat=29 [12:48] Is anyone familiar with FreeCol? [12:48] me does not know what FreeCol is :O [12:48] have ppl has a AMD 64 bit system X lock up ( but you can see move mouse and see what is working ) but cant click or alt FX or even CTRL ALT Backspace === jrib [n=jrib@upstream/dev/jrib] has joined #ubuntu === k14fan [n=robert@pool-71-172-139-111.nwrknj.east.verizon.net] has joined #ubuntu [12:48] note using USB KB and mouse === backpro [n=backpro@bzq-79-180-54-136.red.bezeqint.net] has joined #ubuntu === Revolution^Is^My [n=eldita@61.8.79.204] has joined #ubuntu [12:49] ubotu: another question ,my HP laptop maybe too queit, i mean the fan seem not work normal , I use Ubuntu 7.04 and my laptop is HP 3416 Must I take the fan working by myself just like some dell laptop (wish u can understand My mother language is not english ,but I'm a ubuntu super fans :D [12:49] when i input my name and passworld ,the system say that "can't start kstartupconfig" why? === Linux-Esel [n=michael@i59F6110C.versanet.de] has joined #ubuntu [12:49] kstartupconfig === ShinSR71 [n=mb@82.101.254.223] has joined #ubuntu === |Element| [n=Element@116.215.161.1] has joined #ubuntu [12:50] nothing comes up when i use sudo users-admin [12:50] rokey, your laptop fan might be dusty === webby [n=webby@202-154-113-132.people.net.au] has joined #ubuntu [12:50] fully223, not even anything in the Terminal? [12:50] hello i have ubuntu with gnome desktop !! and adsl connection i have pppoeconf packages its work good but i search another package like pppoeconf [12:50] it wants my pass [12:50] then i type it in [12:50] and it does nothing [12:51] I'm wondering where gPHPEdit stores it's settings. There is nothing in ~/.gphpedit and nothing in gconf-editor for it, no /etc/gphpedit or anything [12:51] rokey, ubotu is a robot it cannot converse [12:51] yjwong I tried on terminal to write Ispci [12:51] but says command no found === hechu [n=hechu@218.20.48.232] has joined #ubuntu [12:51] hello,everyone.my system can't startx kstartupconfig? [12:51] amio, it is "l" (as in, l for Linux) === Arcad3 [n=Arcad3@81.196.174.146] has joined #ubuntu [12:51] amio not L lspci [12:51] sudo users-admin doesn't work [12:52] OK brb [12:52] fully223, does other admin programs work (i.e. shares-admin) [12:52] jxxxt:really? Oh.... === qazibasit [n=qazibasi@116.71.7.41] has joined #ubuntu [12:52] jxxxt: can u help me about that [12:52] gnomefreak: yea, ok thx mate - you helped alot! cheers : ) === s0y [n=mickey@ip70-187-166-107.oc.oc.cox.net] has joined #ubuntu === neversfelde|mobi [n=neversfe@mue-88-130-127-194.dsl.tropolys.de] has joined #ubuntu [12:53] nope === Arcad3z [n=Arcad3@81.196.174.146] has joined #ubuntu [12:53] yw === didav [n=didav@ip-85-160-6-226.eurotel.cz] has joined #ubuntu === ubuntu_ [n=ubuntu@82.84.4.70] has joined #ubuntu [12:53] yjwong it is ATI Technologies Inc RV350 as i think I saw === Linux-Esel [n=michael@i59F6110C.versanet.de] has joined #ubuntu [12:53] i might have taken off administor prefs and cant do anything now === Bjornalf [n=tgalus@ool-44c74b39.dyn.optonline.net] has joined #ubuntu === nixblicker [n=nixblick@e181054001.adsl.alicedsl.de] has joined #ubuntu [12:54] rokey, I will try, put your hand over fan exhaust is warm air coming out? [12:54] amio, then you need the ATI drivers installed [12:54] hello i have ubuntu with gnome desktop !! and adsl connection i have pppoeconf packages its work good but i search another package like pppoeconf with GUI === syntux [n=Jad@unaffiliated/madeye] has joined #ubuntu [12:54] jxxxt,not so warm [12:54] to check, type "glxinfo | grep rendering" (without quotes) === shinao1 [n=shinao1@196.207.1.30] has joined #ubuntu === Kayde [n=kayde@d58-110-219-122.rdl4.qld.optusnet.com.au] has left #ubuntu [] [12:54] well when I went to instricted drivers I saw that it reqiures installing some driver to make the card work properly [12:54] if it gives "direct rendering: Yes", then you are ready to install Compiz Fusion === MeRodent [n=eric@ppp121-44-209-235.lns1.hba1.internode.on.net] has joined #ubuntu === Jagix is now known as jagix-bouffe [12:55] so what should I do in general === macomo [n=macomo@83.230.234.215] has joined #ubuntu [12:55] rokey, In linux the fan does not run all the time only when needed [12:55] should i reset ubuntu [12:55] jxxxt but i don't know if it run in the same speed even if my cpu is too hot === speme [n=speme@131.72.56.59.broad.fz.fj.dynamic.163data.com.cn] has joined #ubuntu === Linux-Esel [n=michael@i59F6110C.versanet.de] has joined #ubuntu [12:55] I dont wanna have same situation like with beryl when i couldnt start ubuntu after i edited the .txt files [12:55] amio, I think Ubuntu asks you to install the open source drivers === neosix [n=neosix@212.200.100.200] has left #ubuntu ["Kopete] === PriceChild [n=pricechi@ubuntu/member/pdpc.supporter.student.PriceChild] has joined #ubuntu [12:56] anyone here use firestarter and bittorrent? === MeRodent [n=eric@ppp121-44-209-235.lns1.hba1.internode.on.net] has joined #ubuntu [12:56] rokey, I am not sure what to tell you sorry. [12:56] i need to know how to set it up === jeffrey [n=jeffrey@pool-96-233-0-199.bstnma.east.verizon.net] has joined #ubuntu [12:56] wait a moment, amio === GonG_GonG_ [n=vodka@202.57.178.77] has left #ubuntu ["Ex-Chat"] === jeffrey [n=jeffrey@pool-96-233-0-199.bstnma.east.verizon.net] has left #ubuntu ["Ex-Chat"] [12:56] jxxxt: forget that buddy, === fully223 [n=james@60-242-87-230.static.tpgi.com.au] has left #ubuntu ["Ex-Chat"] [12:56] k yjwong [12:56] Does anyone here know how to play FreeCol [12:56] ? [12:56] It's one of the top 25 sourceforge projects === OleG [n=oleg@89-28-10-179.starnet.md] has joined #ubuntu === fiveiron [n=fiveiron@74-137-162-129.dhcp.insightbb.com] has joined #ubuntu [12:57] amio: you can either use the open source "ati" or "radeon" drivers already in xorg, or you ca install the official ati "fglrx" driver using the restricted drivers manager/envy [12:57] ANYONE know how to add bittorrent port in firestarter? [12:57] attunix: ask in #ubuntu-offtopic [12:57] thanks [12:57] renzo17: please dont suggest envy === qazibasit [n=qazibasi@116.71.7.41] has joined #ubuntu [12:57] hello i have ubuntu with gnome desktop !! and adsl connection i have pppoeconf packages its work good but i search another package like pppoeconf with GUI ??????????? [12:57] amio: if you wait a week or so you can use the brand spanking new linux friendly, completely re-written "fglrx" driver that supposedly puts the nvidia driver to shame [12:57] jxxxt: thank u all the way . I think i need to google it use my mother language. wish google can understand me :p === Beno_ [n=daniel@CPE-121-208-164-164.qld.bigpond.net.au] has joined #ubuntu [12:58] envy is bad bad script === Beno_ is now known as Dano === attunix [n=patrick@c-71-203-10-234.hsd1.fl.comcast.net] has left #ubuntu [] [12:58] gnomefreak: ok.....mind if i ask why? [12:58] amio, i gotta eat now, but meanwhile you can take a look at this thread: http://ubuntuforums.org/showthread.php?p=3294300 === maurish [n=pauli@a91-153-149-166.elisa-laajakaista.fi] has joined #ubuntu [12:58] gnomefreak: fair enough [12:58] from where can i get the ubuntu opensource === yjwong is now known as yjwong|dinner === murrayc [n=murrayc@u25-56.dsl.vianetworks.de] has joined #ubuntu [12:58] ????? === seamus_ie [n=seamus_i@89-125-55-185.dhcp-ripwave.irishbroadband.ie] has joined #ubuntu === biggahed [n=biggahed@189.25.2.1] has joined #ubuntu [12:58] qazibasit: www.ubuntu.com === Kjellson [n=kjellson@81-234-251-89-no20.tbcn.telia.com] has left #ubuntu [] [12:58] quit [12:58] part === Bjornalf [n=tgalus@ool-44c74b39.dyn.optonline.net] has left #ubuntu [] [12:58] qazibasit: what do you mean "ubuntu opensource"? [12:58] rokey, what langauge you need [12:58] i cant find it there === marcin_ant [n=marcin@194.114.146.126] has joined #ubuntu [12:58] means the uncompiled version [12:59] qazibasit: http://releases.ubuntu.com [12:59] !source > qazibasit (see the private message from ubotu) === mylogic [n=matt@mylogic.net] has joined #ubuntu [12:59] ok [12:59] qazibasit: apt-get source package_name [12:59] jxxxt Chinese, not enough linux tech in Chinese u know === tarntow [n=jaxon@221.127.200.126] has joined #ubuntu [12:59] ok, i dloaded the google earth new version .bin, how do i install it, do i need to uninstall the old one? [12:59] and how do i do that if i haveto? === maurish [n=pauli@a91-153-149-166.elisa-laajakaista.fi] has joined #ubuntu [12:59] thanks for all help BTW === biggahed [n=biggahed@189.25.2.1] has joined #ubuntu === marius__ [n=marius@82.117.37.22] has joined #ubuntu === sydfc [n=james@60-242-87-230.static.tpgi.com.au] has joined #ubuntu === cuijinli_ [n=cuijinli@222.94.2.103] has joined #ubuntu [01:00] rokey, i think there is chinese ubuntu === valmarko [n=chav3s@bl5-81-25.dsl.telepac.pt] has joined #ubuntu === Jowi [n=johan@bgn92-4-82-238-212-88.fbx.proxad.net] has joined #ubuntu [01:00] !ch | rokey [01:00] Sorry, I don't know anything about ch - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [01:00] moDumass: run "sh GoogleEarthLinux.bin" === galaxy_ [n=galaxy@88.87.9.45] has joined #ubuntu [01:00] is it possible to redirect all network traffic through a http proxy using iptables? [01:00] jxxxt yup , but no chinese factoids [01:00] !zh | rokey, jxxxt [01:00] rokey, jxxxt: For Ubuntu help in Chinese #ubuntu-cn #ubuntu-tw #ubuntu-hk [01:00] ok yjwong thanks any way [01:00] !cn | rokey [01:01] rokey: For Ubuntu help in Chinese #ubuntu-cn #ubuntu-tw #ubuntu-hk [01:01] jrib: why is the country code for china zh? === tck [n=tck@213-202-170-177.bas504.dsl.esat.net] has joined #ubuntu === TheZanke [n=thezanke@74-132-182-250.dhcp.insightbb.com] has joined #ubuntu === anto [n=anto@c-25b7e655.54-5-64736c14.cust.bredbandsbolaget.se] has joined #ubuntu [01:01] i know it , not enough u know ? [01:01] help me [01:01] jrib, thanks [01:01] This usually means that another package management application (like apt-get or aptitude) already running. Please close that application first. [01:02] jxxxt: hey ubotu is so smart [01:02] !botsnack [01:02] Yum! Err, I mean, APT! [01:02] Heya guys how do i setup a separet X for my second screen with is on divx witch i want to be the main screen ??? === Liandrin [n=ankh@billfernie.plus.com] has joined #ubuntu === Fudgie [n=erlends@80.91.32.21] has joined #ubuntu === neoalvaro [n=neoalvar@23.141.219.87.dynamic.jazztel.es] has joined #ubuntu === Bierdopje [n=peter@a80-100-71-108.adsl.xs4all.nl] has joined #ubuntu === blitzwiesel [n=blitz@dslb-088-073-110-145.pools.arcor-ip.net] has joined #ubuntu [01:02] HAS ANYONE setup firestarter for bittorrent???? [01:02] "rename 's/.rm$/.rmvb/s' *" only rename the files in one directory.how to rename the file recursively through the subdirectories? === backpro [n=backpro@bzq-79-180-54-136.red.bezeqint.net] has left #ubuntu ["Leaving"] === m0u5e [n=denniska@c-24-6-100-103.hsd1.ca.comcast.net] has joined #ubuntu [01:03] rokey, Yes if you make !question it will answer but you cannot talk [01:03] This usually means that another package management application (like apt-get or aptitude) already running. Please close that application first. === TheZanke [n=thezanke@74-132-182-250.dhcp.insightbb.com] has joined #ubuntu === TheZanke [n=thezanke@74-132-182-250.dhcp.insightbb.com] has joined #ubuntu [01:04] jxxxt: I know never happened again.... [01:04] galaxy_, have you started an update? [01:04] no error [01:04] why? [01:04] Does anybody know about the possibility of using i.e. a laptop with ubuntu as a navigational tool on the sea? === entilzha [n=entilzha@dhcp-089-098-235-185.chello.nl] has joined #ubuntu [01:04] if so close the update window as is a package manager. [01:05] IdleOne: i have no idea [01:05] anto: http://allostalk.com/showthread.php?t=444559 that may help [01:05] jxxxt: where'r u from? [01:05] renzo17, Thanks ill look === OleG [n=oleg@89-28-10-179.starnet.md] has joined #ubuntu === ipx [n=ipx@c-c0fee455.41-2-64736c10.cust.bredbandsbolaget.se] has joined #ubuntu [01:05] rokey, New Zealand but I am in Australia right now.. === entilzha [n=entilzha@dhcp-089-098-235-185.chello.nl] has left #ubuntu ["So] === |Element [n=Element@116.215.161.1] has joined #ubuntu [01:06] i have a slight problem. xubuntu automounts my hard drives hdb1 and hdc1 and i can not reformat them or repartition them. i tried to unmount them but they wont. [01:06] jxxxt, so ur an immigrant? === zengen [n=jeffrey@pool-96-233-0-199.bstnma.east.verizon.net] has joined #ubuntu === sidelil [n=davide@adsl-ull-37-50.48-151.net24.it] has joined #ubuntu [01:07] MBR666: you could always use a live cd such as the Gparted LiveCD to reformet drives [01:07] yes i could. but i rather not reboot === zials [n=zials@bas3-windsor12-1177961753.dsl.bell.ca] has joined #ubuntu [01:07] Is it possible to save beryl settings for a window. Ie reverse colours and half fade so it saves it for the next session? === k14fan [n=robert@pool-71-172-139-111.nwrknj.east.verizon.net] has joined #ubuntu [01:07] rokey, I immigrated to New Zealand forty years ago having a look at Australia for a few months then back to NZ again [01:08] Filthpig: I am certain it can be done it would be a question of installing the needed software on the Ubuntu OS [01:08] jxxxt, rokey: please move the offtopic discussion to #ubuntu-offtopic === tarntow [n=jaxon@221.127.200.126] has joined #ubuntu [01:08] i get this error, umount:/media/hdb1 mount disagrees with the fstab [01:08] sorry folks === UNDERsoN [n=smax@dhcp0045.ws.itl.ua] has joined #ubuntu === biggahed [n=biggahed@189.25.2.1] has joined #ubuntu === noxs [n=noxs@e178091086.adsl.alicedsl.de] has joined #ubuntu === EspenG [n=espen@uio-8021x-176-0-25-40.uio.no] has joined #ubuntu [01:09] jxxxt: rude to ask ur gmail so i can ask for ur help not so often ,and u can watch my step on my way to success :D === TheZanke [n=thezanke@74-132-182-250.dhcp.insightbb.com] has joined #ubuntu [01:10] I've got a problem. When my network is disconected my gnome is very slow. When I shutting down eth0 everything is fine. What's the problem [01:10] xchat keeps core dumping [01:10] !!! === Iacobus [n=francisc@212.145.173.174] has joined #ubuntu === toxix [n=JustIn@78-62-6-183.ip.zebra.lt] has joined #ubuntu [01:10] TheZanke: sudo apt-get upgrade xchat [01:10] sorry folks [01:11] alguien sabe como conectarse al servidor de terra? === Pirate_Hunter [n=Pirate_H@host86-146-11-59.range86-146.btcentralplus.com] has joined #ubuntu [01:11] !es | Iacobus [01:11] Iacobus: Si busca ayuda en Espaol por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, all obtendr mas ayuda. [01:11] IdleOne: 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. [01:11] !ru | UNDERsoN [01:11] i have no clue what i removed from panel but every time i start kde it don't show on taskbar [01:11] hi guys [01:11] hullo. [01:12] rokey, Go to #ubuntu-offtopic we cannot use this channel for chat it is unfair for people wanting support [01:12] I'm wondering where gPHPEdit stores it's settings. There is nothing in ~/.gphpedit and nothing in gconf-editor for it, no /etc/gphpedit or anything [01:12] oops i mean ktorrent === drgonzo [n=dr@p54BB7A89.dip.t-dialin.net] has joined #ubuntu === AlinuxOS [n=vsichi@87.1.130.57] has joined #ubuntu === plukin [n=kai@dslb-088-065-143-152.pools.arcor-ip.net] has joined #ubuntu [01:12] jxxxt:ok === biggahed [n=biggahed@189.25.2.1] has joined #ubuntu === Iacobus [n=francisc@212.145.173.174] has joined #ubuntu [01:13] anybody know where this conf file in feisty fawn is for apache, i'd like to edit the www documentroot to public_html - already looked into /etc/apache2/apache2.conf but there isn't a single line on documentroot = and /etc/apache2/httpd.conf is complete blank [01:13] who can help me fix main panel problem on kde? i removed from panel but every time i start ktorrent it dont show on task bar, how cna i fix this? [01:13] TheZanke: report a bug on launchpad I guess ( include the core file ) === web_knows [n=riba@CAcert/User/web-knows] has joined #ubuntu [01:13] Pirate_Hunter: #kubuntu [01:13] kk [01:13] IdleOne: sure, but the question is "does ubuntu have that software available"? === Iacobus [n=francisc@212.145.173.174] has left #ubuntu ["Saliendo"] [01:14] Filthpig: not certain. you can check on packages.ubuntu.com or search in Synaptic [01:14] Filthpig: check the sites configs (in /etc/apache2/sites_enabled iirc) === MeRodent [n=eric@ppp121-44-209-235.lns1.hba1.internode.on.net] has joined #ubuntu [01:14] tried :s [01:14] erm === Kendysz_Jacek [i=Jacek_Ke@unaffiliated/JacekKendysz] has joined #ubuntu [01:14] How can i scp files from remote source -> local but keep the dir structyre so say i scp /global_ro/frank from a remot=e machine to /home/mark - how do i make it put it all in frank (the dir im grabbing) with the subdirs in frank like on server [01:14] firecraft: check the sites configs (in /etc/apache2/sites_enabled iirc) === Iacobus [n=francisc@212.145.173.174] has joined #ubuntu === GothiC_S [n=wnet@125.163.202.124] has joined #ubuntu === qazibasit [n=qazibasi@116.71.7.41] has left #ubuntu ["Ex-Chat"] === Iacobus [n=francisc@212.145.173.174] has left #ubuntu ["Saliendo"] [01:14] Filthpig: ktorrent is def available in ubuntu [01:14] hello there I need someone that know how to use linux in literally. [01:15] Filthpig, i know absolutely nothing at all. but a google search returned this: http://www.gpsdrive.de/ (native linux) and http://www.sping.com/seaclear/ (windows that is reported to work with wine) [01:15] SlimeyPete thanks .. looking. brb [01:15] How can I execute a command so amarok will shutdown in 15min ?? [01:15] Filthpig: think tyou might need to talk with a few devs and see if they cant help you with what you need. ( do any coding? ) [01:15] hmm [01:15] I found one [01:15] GpsDrive [01:15] aha i know how [01:15] neverminds [01:15] should work with all gpses using some standard [01:15] firecraft: you want to use public_html in your users directory? === Rover_ [n=kobe@ip-81-11-206-236.dsl.scarlet.be] has joined #ubuntu === Rover_ [n=kobe@ip-81-11-206-236.dsl.scarlet.be] has left #ubuntu ["Ex-Chat"] === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu [01:16] I've got a problem. When my network is disconected my gnome is very VERY slow. Other DE is fine. When I shutting down eth0 everything is fine. What's the problem [01:16] hello there [01:16] UNDERsoN, set a hostname [01:16] How can I execute a command so amaro will shutdown in 15 min ?? [01:17] !hostname | UNDERsoN [01:17] UNDERsoN: Use hostname to set the hostname, or to do it permanently: edit /etc/hostname and /etc/hosts . WARNING! Make sure that your current hostname and /etc/hosts match, otherwise sudo may not work properly. Alternatively, use the gui at system>administration>networking on the "General" tab [01:17] write a script, use sleep and kill? === opensourceje2 [n=wAcKaToN@ip41-155-210-87.adsl2.versatel.nl] has joined #ubuntu [01:17] Alloha people === mariqn [n=mariqn@89.25.18.11] has joined #ubuntu [01:17] frojnd: you can use 'at' to schedule a command. Schedule one to kill the amarok process. sleep works too like mapp suggests === Arne [i=user@134.245.45.7] has joined #ubuntu === BillOReilly [n=buenos12@fijacion.adsl-connect.eksointernet.net] has joined #ubuntu === factorx [n=asdf@dslb-084-060-035-121.pools.arcor-ip.net] has joined #ubuntu [01:18] which version shall i download? this one: Ubuntu 7.04 - Supported to 2008 or Ubuntu 6.06 LTS - Supported to 2011 [01:18] ? [01:18] the first is newer, but has a shorter support, that is the dillemma [01:18] opensourceje2: what you using it for? for desktop/home 7.04 === ntz [i=ntz@89.35.146.201] has joined #ubuntu [01:18] voor server [01:18] for [01:18] then 6.06 may be better [01:19] ok tnx and why? [01:19] cause of the support? === Polis_ttt [n=Polis_tt@194-237-172-225-no48.business.telia.com] has joined #ubuntu [01:19] opensourceje2: support yes, and longer updates period, uses more stable software too === GlasstuX [n=exmethix@p4FC4F826.dip.t-dialin.net] has joined #ubuntu [01:19] ok tnx === TheZanke [n=thezanke@74-132-182-250.dhcp.insightbb.com] has joined #ubuntu [01:19] opensourceje2: 6.06 will have older software as well, take that into consideration === passbe [n=passbe@ppp184-119.static.internode.on.net] has joined #ubuntu [01:19] Hope that helped... [01:20] Yez that helps me very much :) === Arne [i=user@134.245.45.7] has left #ubuntu [] === codi [n=abrar@61.17.193.222] has joined #ubuntu === TheZanke [n=thezanke@74-132-182-250.dhcp.insightbb.com] has joined #ubuntu === allbert [n=allberto@60.53.38.206] has joined #ubuntu [01:20] Heh, guess not.. [01:20] ? [01:21] opensourceje2: i use 7.04 as a server without any problems, but obviously security updates and stuff will stop next year [01:21] http://img124.imageshack.us/my.php?image=untitledic7.png [01:21] help !? [01:21] ok :) i need linux for skool === k14fan [n=robert@pool-71-172-139-111.nwrknj.east.verizon.net] has joined #ubuntu [01:21] galaxy_: do you still have the virtualbox deb? [01:21] yes === _GoRDoN_ [n=heikki@a88-112-169-13.elisa-laajakaista.fi] has joined #ubuntu [01:21] and i think ubuntu is the best distro, cause the most paper is going around in ubuntu === ni1s [n=ni1s@1-1-4-36a.dre.sth.bostream.se] has joined #ubuntu === TheZanke [n=thezanke@74-132-182-250.dhcp.insightbb.com] has joined #ubuntu [01:22] galaxy_: close update-manager and open a terminal. Then type 'sudo dpkg -i /path/to/virtualbox/deb' change the path to whatever it is === d3ck4_ [n=d3ck4@201-26-212-221.dsl.telesp.net.br] has joined #ubuntu [01:22] hej opensourceje2, yes ubuntu is a good choice [01:22] or edubuntu for you, school kids [01:22] :> === dolus [n=roger_de@81.241.231.209] has joined #ubuntu === Captain_Inferno8 [n=Bushsuck@adsl-074-166-214-206.sip.bct.bellsouth.net] has joined #ubuntu [01:23] opensourceje2, if you can wait for another 22 days, you will get a newer LTS hopefully :D [01:23] hehe ok tnx, but this is good for me now [01:23] in firestarter when adding a new inbound rule for bittorrent should I select "when the source is...." 1) ANYONE or 2) IP, host or network????? [01:23] teKnofreak: gutsy isn't LTS, only hardy [01:23] jrib, ohhh :-s === Le-Chuck_ITA [n=Le-Chuck@dhcp-131-114-3-79.di.unipi.it] has joined #ubuntu [01:23] does anyone know how to read info from a windows share directly from the share instead of the cache? [01:23] s/22 days/6 months 22 days/ :D [01:23] opensourceje2, why do you need for school? [01:24] hi all, somebody knows why bug #49594 https://bugs.launchpad.net/ubuntu/+bug/49594 is marked as "not in ubuntu"? [01:24] Gah! During boot, Ubuntu tried to assemble my software raid(hda3 & hdb4) but failes, it tried to "bind" hda3 and hdb (no trailing number), in doing this, all the hdbN(1-4) dissapears, anyone seen this before? [01:24] how can I make it "in ubuntu"? [01:24] it is very important for me to end this morning bug reporting session :) === eevar2 [n=snuffpup@193.213.27.74] has joined #ubuntu === zyth [n=zyth@wnpgmb06dc1-0-52.dynamic.mts.net] has joined #Ubuntu [01:24] any known issues with setting up lvm on a raid volume with the server install? === _GoRDoN_ [n=heikki@a88-112-169-13.elisa-laajakaista.fi] has joined #ubuntu [01:25] i need to make a exam about linux and now i use BSD, but i wanna make that exam very good, so i take some linux distro to excercise and ubuntu was my first touch with opensource (desktop) === jagix-bouffe is now known as jagix [01:25] noo === xfiles_ken [n=ken-fire@58.54.144.105] has joined #ubuntu [01:25] ah right, bsd cool === _uplinkd_ [n=nikk@adsl-69-210-134-79.dsl.milwwi.ameritech.net] has joined #ubuntu [01:26] so when i need a serious linux server in future i definitly take ubuntu [01:26] does anyone know how to read info from a windows share directly from the share instead of the cache? [01:26] I install g++(Gnu c++ compiler) from sinaptic but now i can't find from where to start the program.Ideas? [01:26] nothing seems to happen when i try to create a logical volume [01:26] Le-Chuck_ITA: that's weird, try #ubuntu-bugs or #launchpad maybe [01:27] i hope in a few years that Ubuntu is taking the desktopmarket [01:27] that is a very interesting economic situation [01:27] thanks, jrib [01:27] nobody is listening to ubuntu-bugs [01:27] trying lanuchpad [01:27] well its going strong, obviously lots will stay windows-older people/computer illiterate may not change === cardone [n=carmelo@adsl-ull-32-51.46-151.net24.it] has joined #ubuntu === FelipeBare [n=felipe@mail.gestao.com.br] has joined #ubuntu [01:27] hi all [01:27] Le-Chuck, maybe they are asleep/at work, just tell them in chan so they know === seamus_ie [n=seamus_i@89-125-55-185.dhcp-ripwave.irishbroadband.ie] has left #ubuntu ["Kopete] === rainbow` [n=ra1nb0w@213-156-55-129.fastres.net] has joined #ubuntu [01:28] mapp, that people are not openminded, the must see an Desktopenviroment like a car [01:28] I have a problem with xorg configuration [01:28] they [01:28] mariqn: type "g++" in a terminal [01:28] excellent SlimeyPete that worked out pretty nice :) [01:28] cardone, spell it out [01:28] I have a widescreen [01:28] mariqn: see "man g++" for instructions [01:28] !enter | cardone [01:28] firecraft: :) [01:28] cardone: Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation! [01:28] marign, I would open a terminal and type the program name === flemnos [n=jason@63.74.145.122.ap.yournet.ne.jp] has joined #ubuntu [01:28] cardone: whats the problem [01:28] i am trying to save the .deb package from this site http://albertomilone.com/nvidia_scripts1.html and then install it but im having trouble, how should i save it to my computer so that it can be properly installed? === eevar2 [n=snuffpup@193.213.27.74] has left #ubuntu ["Leaving"] [01:28] does anyone know how to read info from a windows share directly from the share instead of the cache? === serahp [n=chatzill@218.64.29.29] has joined #ubuntu [01:29] kdxx, wget it? [01:29] kdxx, try wget -c url [01:29] dolus; an nfs share? [01:29] tekno; wget :) but what does the added -c do? [01:29] !envy | kdxx [01:29] kdxx: envy is a script that may leave you envious of those who have not used it, use the resticted manager to install binary drivers or use the instructions on the wiki, this script may break your machine very badly! [01:29] my problem is that my widescreen dysplay like a non widescreen [01:29] cardone; edit xorg.conf /etc/X11/xorg.conf ? [01:29] I have an nvidia and xorg seems correctly configured [01:29] mapp [01:29] cardone, mean your screen is not completely occupied by desktop ? === AlexC_ [n=alex@host217-43-16-102.range217-43.btcentralplus.com] has left #ubuntu ["TangoCMS] [01:30] mapp: solved [01:30] I added an ubuntu package [01:30] yes teKnofreak [01:30] During boot, Ubuntu tried to assemble my software raid(hda3 & hdb4) but failed, it tried to "bind" hda3 and hdb(no trailing number), in doing this, all the hdbN(1-4) dissapears, making it impossible to mount it manually, does anyone know what's going on here? [01:30] Le-Chuck_ITA,;good what was it [01:30] may be gnome-session is no longer the name of an ubuntu package [01:30] thank you anyway [01:30] cardone: if you have nvidia-settings installed you can use that to set up your xorg.conf with correct resolutions === slipry [n=slipry@59.188-242-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [01:31] mapp, -c continues download if it gets disconn in the middle === strongarm [n=slipry@59.188-242-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [01:31] dpkg: status database area is locked by another process === fajt [n=daniel@c213-100-43-235.swipnet.se] has joined #ubuntu [01:31] !who | galaxy_ [01:31] galaxy_: As you can see, this is a large channel. If you're speaking to someone in particular, please put their nickname in what you say (use !tab), or else messages get lost and it becomes confusing :) === loca|host [n=tux@196.203.53.221] has joined #ubuntu [01:31] galaxy_: do you have update-manager, synaptic, add/remove or similar things open? [01:32] again error ! === Martinp24 [n=martinp2@wikimedia/Martinp23] has joined #ubuntu === erUSUL [n=erUSUL@133.Red-83-37-198.dynamicIP.rima-tde.net] has joined #ubuntu [01:32] teKnofreak, i am in wget chan and have looked around for ages-you ever managed to wget from a site using ssl + certificates , i have tried everything and cannot get it to work! === _GoRDoN__ [n=heikki@a88-112-169-13.elisa-laajakaista.fi] has joined #ubuntu === giant [n=giant@75-107-252-245.cust.wildblue.net] has joined #ubuntu [01:33] mapp, nope === Le-Chuck_ITA [n=Le-Chuck@dhcp-131-114-3-79.di.unipi.it] has left #ubuntu ["Leaving."] [01:33] does anyone know how to read info from a windows share directly from the share instead of the cache? === sommer_ [n=sommer@192.154.64.85] has joined #ubuntu === Jacek_Kendysz [i=Jacek_Ke@unaffiliated/JacekKendysz] has joined #ubuntu [01:33] !patience | dolus [01:33] dolus: The people here are volunteers, your attitude may determine how fast you are helped. Not everyone is available all the time, likewise not every answer is available instantly. See also http://wiki.ubuntu.com/IrcGuidelines === khamael [n=Uriel@73.84-48-218.nextgentel.com] has joined #ubuntu [01:35] is there a command that will list all user accounts ( not just logged on ) ? [01:35] UNDERsoN, did it help? === Kacper [n=michal@host-ip240-131.crowley.pl] has joined #ubuntu === erUSUL [n=erUSUL@133.Red-83-37-198.dynamicIP.rima-tde.net] has joined #ubuntu [01:36] IdleOne, will not `ls /home` satisfy you ? === ta_bu_shi_da_yu [n=chris@c210-49-15-96.blktn4.nsw.optusnet.com.au] has joined #ubuntu === yjwong|dinner is now known as yjwong [01:36] hey all, anyone know where I can get X11R5 compatibility libraries for Feisty Fawn? [01:37] ls /home will list all dir in /home? I want to know the user accounts [01:37] jrib, http://img129.imageshack.us/my.php?image=untitlednu3.gif === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu [01:37] hmmm teKnofreak ok that worked [01:37] teKnofreak: ty [01:37] IdleOne, /home contains home dirs of all users.. hence it gives the user names === didav [n=didav@ip-85-160-15-47.eurotel.cz] has joined #ubuntu === Revolution^Is^My [n=eldita@61.8.79.204] has joined #ubuntu [01:38] IdleOne, but this trick doesn't work on users without their own home dir [01:38] teKnofreak: is it possible to have hidden user accounts? === ncansino [n=ncansino@83.230.234.93] has joined #ubuntu === bain [n=bain@hawk.tbm.co.za] has joined #ubuntu [01:38] IdleOne, there can be users without a home dir, but mostly system users [01:38] alo [01:38] hmm a question regarding destkop effects [01:39] is this just activating beryl in the background? [01:39] erm [01:39] teKnofreak: what I am trying to see is if there are any user accounts I dont know about that should not be there [01:39] if yes, how can I configure the effects? [01:39] /etc/password contains the usernames, home directories, shells, of all users [01:39] galaxy_: you need to _close_ update-manager and any other package managent software === labmicro4 [n=labmicro@micropro4.rc.unesp.br] has joined #ubuntu === jscinoz [n=jscinoz@c220-239-12-203.belrs4.nsw.optusnet.com.au] has joined #ubuntu [01:39] yjwong: I'll have a look ty [01:39] IdleOne, then /home will help === gana-home [n=ganadist@58.140.133.158] has joined #ubuntu [01:39] bye all === opensourceje2 [n=wAcKaToN@ip41-155-210-87.adsl2.versatel.nl] has left #ubuntu [] === rokey [n=rokey@61.134.11.251] has left #ubuntu ["Leaving"] [01:40] During boot, Ubuntu tried to assemble my software raid(hda3 & hdb4) but failed, it tried to "bind" hda3 and hdb(no trailing number), in doing this, all the hdbN(1-4) dissapears, making it impossible to mount it manually, does anyone know what's going on here? [01:40] Why does Linux in achware.h suggest a PM_TIMER__FREQUENCY = 3.579545 MHz? [01:40] Karotte, the "Desktop Effects" program enables only Compiz [01:40] how do i set up the userdir for apache2 i mean where do i look into for that that conf file.. so users added can access their invidual pages with http://ip/~user [01:40] firecraft: sudo a2enmod userdir [01:41] and by default, there are no programs to configure the effects except through gconf-editor [01:41] firecraft: msg me .. [01:41] ni1s, we can see your question, be patient to find whether some one answers your question, if not am sorry [01:41] yjwong: okay so if I want beryl I still have to install xgl/beryl itself === Pichu0102 [n=pichu010@adsl-68-254-29-248.dsl.dytnoh.sbcglobal.net] has joined #ubuntu [01:41] jrib that simple ? ~.^ [01:41] firecraft: yes === thekorn [n=thekorn@a89-182-4-50.net-htp.de] has joined #ubuntu [01:41] Karotte, yes. But i recommend Compiz Fusion over Beryl [01:41] unless you have problems with Compiz Fusion previously [01:41] or that ;P === Nita_ [n=oranye1@125.164.252.24] has joined #ubuntu [01:41] teKnofreak, Sorry, getting frustrated :( === jorhed [n=jorhed@fw.packetfront.com] has joined #ubuntu === tiger_ [n=tiger@218.88.112.65] has joined #ubuntu === magicaltrevsky [n=magical@host81-149-185-161.in-addr.btopenworld.com] has joined #ubuntu === jorhed is now known as antzen [01:42] yjwong: uhm that isn't in Feisty is it? === Skyline_Nismo [i=Whore@85.187.187.84] has joined #ubuntu [01:42] bain, isn't Ubuntu's Apache configured by default to serve files in ~/public_html/? === heyadayo [n=heyadayo@pool-72-87-174-150.plspca.dsl-w.verizon.net] has joined #ubuntu [01:42] ni1s, no use in getting frustrated in a public channel full of volunteers [01:42] hello [01:42] [01:42] yjwong, you have to enable it IIRC [01:42] yjwong: nope .. [01:42] yjwong: I'll give it a try if you tell me where I can get it :) [01:42] it is commented out [01:43] !cn | tiger_ [01:43] tiger_: For Ubuntu help in Chinese #ubuntu-cn #ubuntu-tw #ubuntu-hk === goundy [n=iGotIt@236.180-242-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [01:43] teKnofreak, true, my apologies [01:43] I'm having trouble unblocking the postgres port... I tried this line: "iptables -A INPUT -p tcp --dport postgres -j ACCEPT" but i still can't connnect. Any ideas? [01:43] hehe [01:43] thanks for the info, teKnofreak and bain :P [01:43] didn't know that === CraHan [n=crahan@cust.fiber-lan.vnet.lk.85.194.49.78.stunet.se] has joined #ubuntu [01:43] thank [01:43] firecraft, better check about VirtualHost and Alias for apache2.conf [01:43] yjwong: you enable it using the command jrib pasted .. or by adding the -D USERDIR to startup command .. [01:43] does anyone know how to read info from a windows share directly from the share instead of the cache? === Skyline_Nismo is bored... [01:44] Karotte, Compiz Fusion is actually Compiz plus many more plugins [01:44] that's neat jrib thanks ;) [01:44] Skyline_Nismo: #ubuntu-offtopic sometimes is a good distraction [01:44] those plugins are available as the packages compiz-fusion-plugins-* [01:44] firecraft: np [01:44] heyadayo, the default port of postgres is 5432. [01:44] firecraft, you can add a vhost or alias/scriptalias entry to /etc/apache2/sites-enabled/00-default to use any of the dirs in /home/user for serving files on the server === Latty [n=Latty@host86-133-33-116.range86-133.btcentralplus.com] has joined #ubuntu [01:44] yjwong: okay but how do I install it? === Fonda [n=Fonda@BSN-95-218-234.dial-up.dsl.siol.net] has joined #ubuntu === Skyline_Nismo is now known as Whore_19 === Whore_19 is now known as Whore_19_f [01:45] teKnofreak its all set already :p === Fonda [n=Fonda@BSN-95-218-234.dial-up.dsl.siol.net] has left #ubuntu ["Leaving"] [01:45] heyadayo, try to change --dport postgres to --dport 5432. Is an idea === Nita_ is now known as fhy [01:46] !ops | Whore_19_f <------ [01:46] Whore_19_f <------: Help! Mez, LjL, elkbuntu, imbrandon, DBO, gnomefreak, Hobbsee, rob, ompaul, Madpilot, Burgundavia, Seveas, CarlK, crimsun, ajmitch, tritium, Nalioth, thoreauputic, apokryphos, tonyyarusso, PriceChild, Amaranth, jrib, jenda, nixternal, Myrtti, mneptok or Pici === Starting logfile irclogs/ubuntu.log === ubuntulog [i=ubuntulo@ubuntu/bot/ubuntulog] has joined #ubuntu === Topic for #ubuntu: Official Ubuntu Support Channel | Please be patient and read the FAQ. | FAQ: https://help.ubuntu.com/community/CommonQuestions | Support options: http://www.ubuntu.com/support | IRC info: https://wiki.ubuntu.com/IRCResourcePage | Pastes to http://paste.ubuntu-nl.org === Topic (#ubuntu): set by PriceChild at Sun Aug 5 18:04:23 2007 [01:56] (chelo77/#ubuntu) Ion Scorpious-P20 wireless USB keyboard problem.Cannot get it work is someone in here who have same problem or even bether answer how to get it work :)? === dolus [n=roger_de@81.241.231.209] has left #ubuntu [] [01:56] (UNDERsoN/#ubuntu) Jowi yes It help it work fast now. thanks === vinicri [n=chatzill@20158177195.user.veloxzone.com.br] has joined #ubuntu === lmr_ [n=lmr@32.104.18.243] has joined #ubuntu [01:57] what is the dreamwaver for ubuntu? [01:57] Amaranth how do i know whether i have xgl or aixgl.. if it helps i'm running beryl for months now === ChasersWar [n=queerant@d58-108-50-87.dsl.vic.optusnet.com.au] has joined #ubuntu === No1Viking [n=micke@h-83-140-104-41.auto.rp80.se] has joined #ubuntu [01:58] vinicri, Bluefish ? [01:58] firecraft: pgrep Xgl === Aka-RouG [n=roug@ARouen-251-1-39-14.w90-23.abo.wanadoo.fr] has joined #ubuntu [01:58] firecraft: if that returns a number you have Xgl, doesn't matter though [01:58] vinicri: NVU === HHH_AI [n=axman@88.134.142.55] has joined #ubuntu [01:59] firecraft: our compiz automatically detects what you have and adjusts itself accordingly [01:59] that doesn't return anything Amaranth [01:59] hi! === linuxfool [n=linuxfoo@222.85.126.211] has joined #ubuntu === incorrect [n=incorrec@host217-39-160-222.in-addr.btopenworld.com] has joined #ubuntu [01:59] firecraft: You're not using Xgl then. Not a big deal if beryl already works === PriitM [n=priit@ip199.cab17.mus.starman.ee] has joined #ubuntu [01:59] I've a little problem... i think most of you find that funny.. but i don't get a .run file installed.... === sudhanshu [n=sudhansh@122.167.110.214] has joined #ubuntu [02:00] could someone help me? my ubuntu can't execute this kind of file... Oo === ben_underscore [n=ben@ppp121-45-158-7.lns11.adl6.internode.on.net] has joined #ubuntu === khamael [n=Uriel@73.84-48-218.nextgentel.com] has joined #ubuntu === ziggy [n=ziggy@71-212-98-98.tukw.qwest.net] has joined #ubuntu === nilesh_ [n=nilesh@203.193.154.146] has joined #ubuntu === lotus-blade [n=lotus-bl@75-120-161-236.dyn.centurytel.net] has joined #ubuntu [02:00] ahh ok but Amaranth little confused. [02:01] HHH_AI: what does the file command say about that run file? [02:01] HHH_AI: what is the file and how are you trying to install it? [02:01] Amaranth "There are currently two composite managers available." which of theose 3 would you recommend me? [02:01] syntax: "file === _GoRDoN_ [n=heikki@a88-112-169-13.elisa-laajakaista.fi] has joined #ubuntu [02:01] is there any way to install via text mode? or do you always have to install using the gui? === jm^2_ [n=jm@erht-a-032.resnet.purdue.edu] has joined #ubuntu [02:01] firecraft: i thought my link was directly to CompizFusion === ChasersWar [n=queerant@d58-108-50-87.dsl.vic.optusnet.com.au] has left #ubuntu [] [02:01] firecraft: if not, go with that one [02:01] lotus-blade: install what? [02:01] firecraft: it's my repo with the updated compiz and the fusion addons [02:02] umbuntu [02:02] firecraft: the compiz that shipped with feisty was an embarrassment === brown_cat [n=chatzill@124-168-80-40.dyn.iinet.net.au] has left #ubuntu [] === MBR666 [n=bryan@pool-70-16-41-194.buff.east.verizon.net] has joined #ubuntu [02:02] Amaranth you mean this - "CompositeManager/Compiz - A combination window manager and composite manager from Novell." ? [02:02] !alternate | lotus-blade [02:02] lotus-blade: The Alternate CD (available as of Dapper) is the classical text-mode installation CD. Use it if you wish to upgrade via CD, or for an "expert" mode install. For normal installs, use the Desktop CD, which is also a "Live" CD - See also !Minimal [02:02] lotus-blade: you want the alternative cd [02:02] lotus-blade: have you tried the "Alternate CD"? http://releases.ubuntu.com [02:02] when i first opened it via double click, it opened GEdit. Then i made it executable, opened in terminal. then its uncrompressing, but then it says "./setup.sh: 273: /home/axman/.setup6497: not found [02:02] ." [02:02] firecraft: no, https://help.ubuntu.com/community/CompositeManager/CompizFusion === beeew [n=chatzill@c-24-7-43-146.hsd1.ca.comcast.net] has joined #ubuntu [02:03] ahh got it now thanks Amaranth [02:03] *goes to read up* [02:03] its a loki installer of enemy territory [02:04] but it just don't want to work [02:04] Amaranth, your repository doesn't have a GPG key? [02:04] yjwong: nope [02:04] yjwong: the PPA system doesn't even let you sign things and if it did i still probably wouldn't [02:04] one question: do i need to reboot when i choose other keyboard layout to make changes get affect?? === chryss__ [n=chris@91.104.227.68] has joined #ubuntu [02:04] yjwong: that way you know what packages are from me === nixblicker [n=nixblick@e181025089.adsl.alicedsl.de] has joined #ubuntu [02:05] HHH_AI: run the file by opening a terminal and running "./et-version.run" (obviously using the actual filename === rainerf [n=rainer@83-215-133-28.seek.dyn.salzburg-online.at] has joined #ubuntu === x_ [n=x@222.67.35.56] has joined #ubuntu [02:05] hi all! is there some way to install specific packages from gutsy in feisty without doing a complete dist-upgrade? [02:06] HHH_AI: this may help http://ubuntuforums.org/showthread.php?t=5246 === Smygis [n=smygis@e611.cust.vannas.net] has joined #ubuntu === britta_ [n=britta@chello212186012090.402.14.vie.surfer.at] has joined #ubuntu [02:06] i don't want to update to the beta of gutsy, but i need the newer nvidia driver... === shinao1 [n=shinao1@196.207.1.30] has joined #ubuntu === britta_ [n=britta@chello212186012090.402.14.vie.surfer.at] has joined #ubuntu [02:06] rainerf: There is no beta yet ;) === britta_ [n=britta@chello212186012090.402.14.vie.surfer.at] has left #ubuntu ["Ex-Chat"] [02:06] rainerf: And using the gutsy nvidia driver most likely won't work. [02:06] rainerf: you can allways try but dont forget to copy xorg.conf in case you know what :) [02:07] Tomcat_: hehe, k, i don't want to install the alpha either ;)... [02:07] rainerf: You can try envy: http://www.albertomilone.com/nvidia_scripts1.html [02:07] rainerf ? [02:07] what alpha ? [02:07] rainerf: you could always try installing the latest nvidia driver available on the nvidia website === triske2006 [n=tony@pdx01pncpccgw01.pdx01.inflow.net] has joined #ubuntu [02:07] !envy [02:07] envy is a script that may leave you envious of those who have not used it, use the resticted manager to install binary drivers or use the instructions on the wiki, this script may break your machine very badly! [02:07] Tomcat_: hm, isn't there some way to tell aptitude or something to just pull in the one package from gutsy (with its dependencies of course)? [02:08] rainerf: There is, but it would also install the gutsy kernel... and this might break hundreds of other things. [02:08] HHH_AI: this may be a better guide https://help.ubuntu.com/community/EnemyTerritory === hottiger [n=hottiger@p508ECF47.dip.t-dialin.net] has joined #ubuntu [02:08] rainerf: Drivers are not just like applications, they are tied to the kernel. [02:08] in #gaysm.de [02:08] renzo17: same thing.... starts decrompressing and then it says that it can't find setup.sh etc === grabbis [n=anders@static217-221.adsl.no] has joined #ubuntu [02:09] Tomcat_: hm, i don't mind installing the newer kernel, been using gentoo for years.. i just don't want to clutter up my fs with installing the proprietary driver from their script... [02:09] rainerf: envy is most probably the easiest way to get a new nvidia driver. Not that I ever used it. :) === grabbis [n=anders@static217-221.adsl.no] has left #ubuntu ["Ex-Chat"] === paulopinheiro [n=paulopin@189-11-147-232.bnut3703.dsl.brasiltelecom.net.br] has joined #ubuntu === bcbroilo [n=bcb@cm-net-fln-C8B08B79.dynamic.brdterra.com.br] has joined #ubuntu [02:09] rainerf: In that case you should find out how to package a self-compiled nvidia driver... still easier than pulling the gutsy kernel imho... but that might be wrong. :) === [coca1ne] [n=coca1ne@p549B9D44.dip0.t-ipconnect.de] has joined #ubuntu === eevar2 [n=snuffpup@193.213.27.74] has joined #ubuntu === grabbis [n=anders@static217-221.adsl.no] has joined #ubuntu [02:10] Tomcat_: hehe, the message from ubotu makes me wonder if envy is so good ;) === grabbis [n=anders@static217-221.adsl.no] has left #ubuntu ["Ex-Chat"] [02:10] rainerf: Seeing that many people want newer nvidia drivers, I'm pretty sure somebody already packaged it anyway... try the forums? === dexem [n=dani@14.Red-88-26-177.staticIP.rima-tde.net] has joined #ubuntu === TataraKutere [n=alimurat@85.97.42.114] has joined #ubuntu [02:10] no one who can help me with my doomed wireless keyboard i have?? [02:10] hello guys === piti [n=pablo@mut38-1-82-67-65-78.fbx.proxad.net] has joined #ubuntu === gumuz [n=chatzill@84-245-24-36.dsl.cambrium.nl] has joined #ubuntu [02:11] Tomcat_: yeah, i've been searching for it, but all i could find was a hotwo which was using the installer's script [02:11] Tomcat_: how would i tell aptitude to install just that one package + deps of gutsy? [02:11] i really need an URGENT help about important but easyt things for all my files situations.. [02:11] \server irc.fu-berlin.de [02:11] \disconnect [02:11] rainerf: Also, manually installing the driver won't clutter your fs... I'm pretty sure it's only a couple of files in a seperate directory in /lib/modules. [02:11] Tomcat_: in case something breaks that's not too bad, i'd just install kubuntu again ;) [02:11] i'm having problems trying to use LVM on top of a raid-1 array. is that impossible from the start, am i doing something wrong, or is the ubuntu (server) installer bugged? [02:11] \disconnect [02:11] can anybody do this? i have to rescue my files from ntfs drives, and need permission to do that in ubuntu [02:11] \disconnect [02:12] hottiger, use a / === paulopinheiro [n=paulopin@189-11-147-232.bnut3703.dsl.brasiltelecom.net.br] has joined #ubuntu [02:12] \server irc.fu-berlin.de === T3 [n=t3@201.82.208.136] has joined #ubuntu [02:12] hi everyone. I want to know where an app is trying to use a shared library from (googleearth -> libXdamage.so.1) I have it but don't know where I should link it [02:12] hottiger: "/", not "\" [02:12] hottiger, use the other slash [02:12] aynone know why a shell script would act differently when run for a cron vs from the commandline? === SireeBob [i=SireeBob@unaffiliated/sireebob] has joined #ubuntu [02:12] TataraKutere: so you need to backup files on an ntfs partition? === gnuskool [n=chatzill@82.99.36.199] has joined #ubuntu [02:12] Tomcat_: hm.. i'd still prefer using the one package from gutsy... just can't figure out how to install it in feisty... [02:12] rainerf: No idea about the gutsy kernel thing... there must be some documentation online, because I heard it's necessary for feisty users on MacBook to use a newer kernel (because of wireless) === EspenG [n=espen@uio-8021x-176-0-25-86.uio.no] has joined #ubuntu === master_of_master [n=master_o@p549D5532.dip.t-dialin.net] has joined #ubuntu [02:13] renzo17: no, i need to back them up from that partition === atrocious [n=atrociou@83-52-100.netrun.cytanet.com.cy] has joined #ubuntu [02:13] i have 2 hdd's === bcbroilo is now known as BRN === shearn89 [n=shearn89@62.116.83.62] has joined #ubuntu [02:13] rainerf: http://ubuntuforums.org/showthread.php?t=511974 [02:13] gumuz: different environment === BRN is now known as bcb [02:13] one for ubuntu and one for xp === HHH_AI [n=axman@88.134.142.55] has left #ubuntu [] === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu [02:13] TataraKutere: so can you see the ntfs drive in ubuntu? === bcb is now known as lkas [02:13] xp's got trouble with viruses === lkas is now known as lkass === switchcat [n=center@pool-71-185-100-6.phlapa.east.verizon.net] has joined #ubuntu [02:13] yes i can see renzo17 [02:13] Whenever I switch from X to a virtual terminal, the console font is reset to VGA (from Fixed) along with the encoding (seemingly, because programs like 'aptitude' have messed-up line drawing). Anyone know of a way to make console fonts/encodings *stick* when switching to/from X, or if this is a known problem? [02:14] I'm using Feisty i386. [02:14] Tomcat_: aah, thanks a lot, that was exactly what i was looking for :) === TheZanke [n=thezanke@74-132-182-250.dhcp.insightbb.com] has joined #ubuntu === Polis_t [n=Polis_tt@194-237-172-225-no48.business.telia.com] has joined #ubuntu [02:14] TataraKutere: try this i find it : sudo mkdir /media/win [02:14] sudo mount -t ntfs /dev/hda1 /media/win -o defaults,umask=0 [02:14] ls /media/win [02:14] rainerf: It even has some suggestions for nvidia ;) === shearn89 [n=shearn89@62.116.83.62] has left #ubuntu [] [02:14] TataraKutere: so why not just copy files from your ntfs over to your linux partition? [02:14] then just copy those files to your /home folder === skunkworks [n=skunkwor@68-115-41-210.static.eucl.wi.charter.com] has joined #ubuntu === Svish [n=opera@host-85-30-130-97.sydskane.nu] has joined #ubuntu [02:14] renzol17: i can't, because i have to tidy them and burn to dvd most [02:14] jrib: thanx [02:15] How can I find mac shares from Ubuntu? [02:15] Tomcat_: yeah, just saw this too... thanks :-) === ss [n=oranye@125.164.252.24] has joined #ubuntu === a-atwood [n=alan@dialport16.west.eskimo.net] has joined #ubuntu [02:15] renzol17: the hdd which ntfs one is much bigger than this one..:( === jm^2__ [n=jm@pal-168-210.itap.purdue.edu] has joined #ubuntu === ss_ [n=oranye@125.164.252.24] has joined #ubuntu [02:15] Q: Anybody have a recommendation on testing line-in/audio recording? I havent been able to get it to work yet.. I have an non-microphone device that outputs audio to the right type of jack that I typically record on a voice recorder... running 7.04, soundcard: audigy z2 [02:15] TataraKutere: i dont understand what the problem is? [02:16] renzol17: i need to know only two things: 1st: could the xp viruses can still remain there if i copy them to linux === atrocious [n=atrociou@83-52-100.netrun.cytanet.com.cy] has joined #ubuntu === jao_ [n=jao@64.252.136.67] has joined #ubuntu === lijian [n=lj@59.77.225.16] has joined #ubuntu === rodserling [n=rod@pool-71-124-221-205.bstnma.east.verizon.net] has joined #ubuntu [02:17] malang === Luka1 [n=salawier@87.249.136.246] has joined #ubuntu [02:17] if you just copy them,they are still there :) [02:17] switchcat, does alsamixer show green on line in? === ss_ [n=oranye@125.164.252.24] has left #ubuntu ["Ex-Chat"] [02:17] 2nd is: how can i get the rights to write (or delete) on ntfs drives from ubuntu [02:17] !ntfs-3g > TataraKutere (see the private message from ubotu) === zhuchao [n=zhuchao@222.43.175.39] has joined #ubuntu [02:17] TataraKutere: you could delete them (with ntfs-3g) but i wouldnt recommend that since you may screw your XP setup [02:17] !ntfs | TataraKutere [02:17] who konw how to join the ubuntu-cn? [02:17] TataraKutere: To view your Windows/Mac partitions see https://help.ubuntu.com/community/AutomaticallyMountPartitions . For write access see !ntfs-3g or !fuse === billybob [n=billybob@75.30.163.165] has joined #ubuntu [02:18] TataraKutere: "sudo apt-get install ntfs-config" === JimmyFJ_ [n=jimmy@0x5733ff9d.abnxx12.adsl-dhcp.tele.dk] has joined #ubuntu === JimmyFJ_ [n=jimmy@0x5733ff9d.abnxx12.adsl-dhcp.tele.dk] has left #ubuntu ["Ex-Chat"] [02:18] TataraKutere: will automount your ntfs drives with full read write permissions [02:18] switchcat, does alsamixer show green on line in? === netcrash__ [n=andre@88.157.241.8] has joined #ubuntu [02:18] thank a lot, i'm trying for those you said now... [02:19] hope to see you around...:) === soho [n=user@91.65.208.107] has joined #ubuntu [02:19] gnuskool - hmmm interesting I've never used alsamixer before [02:19] UBUNTU === c0n [n=nocfed@p37.201.dsl.perlicobb.com] has joined #ubuntu === smokestack [n=aaron@ip72-223-93-244.ph.ph.cox.net] has joined #ubuntu [02:19] lijian: /join #ubuntu-cn [02:19] switchcat, type alsamixer in terminal [02:19] has anyone experienced problems with wireless MS mouses under ubuntu? [02:19] !anyone | smokestack [02:19] smokestack: A large amount of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? === eevar2 [n=snuffpup@193.213.27.74] has left #ubuntu ["Leaving"] [02:19] that's my question === zenmonk [n=keegan@ip-134-53-166-115.dhcp.muohio.edu] has joined #ubuntu [02:19] the only one [02:19] Please recommend tv-digital/analog tuner to USB port. I have Ubuntu 7.04(2.6.20-15-generic). I want no problem run without hard setting. Sorry my pure English. [02:20] smokestack: yes [02:20] jrib: something to avoid, then? [02:20] Luka1: Hauppage brands work well in ubuntu [02:20] how can I mount an address starting with afp:// ? [02:20] smokestack: heh, you can get them to work after some fuss, check the forums [02:20] thank you for the jrib [02:20] jrib, right, okay -- thanks === jos3phh [n=grummel@p5496AAFD.dip0.t-ipconnect.de] has joined #ubuntu [02:21] renzo17: Thanks for tip. === askvictor [n=vik@C-59-101-234-125.bur.connect.net.au] has left #ubuntu [] === jos3phh [n=grummel@p5496AAFD.dip0.t-ipconnect.de] has left #ubuntu [] [02:22] no one who have solution how to enable my keyboard,still have a problem with it : Ione Scorpius-P20 wireless with builtin mouse?? === Bino [n=schiffne@pool-64-222-37-158.prov.east.verizon.net] has joined #ubuntu === incorrect [n=incorrec@host81-138-107-161.in-addr.btopenworld.com] has joined #ubuntu === mrigns [n=mrigns@unaffiliated/mrigns] has joined #ubuntu === jos3phh [n=grummel@p5496AAFD.dip0.t-ipconnect.de] has joined #ubuntu [02:22] Luka1: http://www.linuxnetmag.com/en/issue5/m5tvkarte1.html for more info [02:22] gnuskool - thanks I figured out _that_ part... hmmm.. what I think is Line in (displaying as "line") was first marked Mute.. then I un-muted it and I got a green double 00 [02:23] or double OO.. rather === grabbis [n=anders@static217-221.adsl.no] has joined #ubuntu [02:23] chelo, soory no === grabbis [n=anders@static217-221.adsl.no] has left #ubuntu ["Ex-Chat"] [02:23] Luka1: just noticed thats very old but gives good brand names [02:23] :( === Svish [n=opera@host-85-30-130-97.sydskane.nu] has left #ubuntu [] [02:23] !keyboard [02:23] To find out how to switch your keyboard layout, See https://help.ubuntu.com/6.10/xubuntu/desktopguide/C/switch-keyboard-layout.html - See also !Shortcuts === |Element| [n=Element@221.4.137.132] has joined #ubuntu === LakomLacen [n=matej@cmb42-239.dial-up.arnes.si] has joined #ubuntu [02:25] switchcat, you should be ready to go now, put level up if you ned to with arrow keys === Svish [n=opera@host-85-30-130-97.sydskane.nu] has joined #ubuntu [02:25] what proggie is the easiest/best to use for recording from? === spyder [n=spyder@122.2.16.139] has joined #ubuntu [02:26] !mouse | chelo77 this link might have some useful tips [02:26] chelo77 this link might have some useful tips: Enabling extra mouse buttons: https://help.ubuntu.com/community/ManyButtonsMouseHowto - Enabling serial mouse: https://help.ubuntu.com/community/SerialMouseHowto === albreche_ [n=amergenc@ANantes-201-1-4-136.w80-15.abo.wanadoo.fr] has joined #ubuntu [02:26] hi, i am with problems to set-up an Ubintu NIS client. [02:26] i change the /etc/passwd file === black_death [n=sebastia@e178251176.adsl.alicedsl.de] has joined #ubuntu === lijian [n=lj@59.77.225.16] has left #ubuntu ["Ex-Chat"] === Waka_Waka_Waka [n=richard@pool-71-116-23-207.eriepa.dsl-w.verizon.net] has joined #ubuntu === oranye [n=oranye@125.164.252.24] has joined #ubuntu === sanguinarius [n=sanguina@AMontsouris-152-1-55-44.w83-202.abo.wanadoo.fr] has joined #ubuntu [02:27] change the /etc/group file [02:27] oranye === erythro is now known as Erythro [02:27] switchcat, there are heaps. if youre after a cubase-type install rosegarden4 [02:27] change the /etc/shadow file [02:27] and the /etc/yp.conf [02:27] dsfksd [02:28] and the ypbind fails when i restart === zenmonk [n=keegan@ip-134-53-166-115.dhcp.muohio.edu] has left #ubuntu [] [02:28] and happens this error after: === zyth [n=zyth@wnpgmb06dc1-0-52.dynamic.mts.net] has joined #Ubuntu === Filthpig [n=carl@ti0010a380-1453.bb.online.no] has joined #ubuntu [02:28] switchcat, jackd is a good 'sound server' to use within audio applications, it has no latency [02:28] heck I dont even know what cubase is, but I've heard of it before. I just wanted the one that is least likely to need troubleshooting.. for example when I wanted to test video with audio playing, VLC was recommended, and it worked off the bat. [02:28] YPBINDPROC_DOMAIN === gilles [n=gilles@APoitiers-155-1-150-22.w81-50.abo.wanadoo.fr] has joined #ubuntu [02:29] someone can help me, please. [02:29] I everybody [02:29] switchcat, audacity is simplicity mate, start there === boozie [n=blouze@its.beeg.org] has joined #ubuntu [02:30] I need help too [02:30] switchcat, https://wiki.ubuntu.com/UbuntuStudio/PackageList, check the audio package list [02:30] aloha. I've just installed the driver for my Linksys WUSB54GC wireless adapter via ndiswrapper (note, WUSB54G works natively in ubuntu, but not the C-version) and it all went nicely, driver is loaded and all is well === OleMoudi [n=tk422@148.Red-81-39-83.dynamicIP.rima-tde.net] has joined #ubuntu [02:30] except I cannot connect to the network === fideas [n=fideas@116.215.161.1] has joined #ubuntu [02:30] I have problems with the instalation of nvidia drivers === Svish [n=opera@host-85-30-130-97.sydskane.nu] has left #ubuntu [] [02:31] I suspect ubuntu is messing things up a little, because the adapter -sorta- works in ubuntu, just not with wep/wpa enabled [02:31] switchcat, to install audacity sudo apt-get install audacity [02:31] iwconfig shows -two- wireless interfaces, wlan0 and wmaster0 === fender_ [n=fender@mail.dropletsap.com] has joined #ubuntu === smokestack [n=aaron@ip72-223-93-244.ph.ph.cox.net] has left #ubuntu [] [02:31] gilles: what problems? [02:32] gilles: and what version of the drivers are you trying to install? === genii [n=user@host6411912762.biz.tor.fcibroadband.com] has joined #ubuntu [02:32] can somebody help me out? === Iradigalesc [n=Iradigal@wikipedia/Iradigalesc] has joined #ubuntu === genii sips a coffee [02:33] genii how you emote like that? === jimmacdonald [n=jim@138-212-223-66.gci.net] has joined #ubuntu === simurg [n=lix@lea.zhdk.ch] has joined #ubuntu [02:33] gnuskool: /me does something === PanzerMKZ [i=Panzer@07-109.136.popsite.net] has joined #ubuntu === bmsilva24 [n=bruno@193.136.129.223] has joined #ubuntu [02:34] !wireless [02:34] Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs [02:34] I try to install the drivers in 3 ways free drivers, proprietary driver and with envy, but there is the same result : a black screen when the X server load and the computer is lock : i can't do anything === cl3ft [n=cl3ft@210-84-0-184.dyn.iinet.net.au] has joined #ubuntu === NoFX_SBC [n=nofxsbc@200.162.240.36.user.ajato.com.br] has joined #ubuntu === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu === enneth [n=Kenneth@0x55537d12.adsl.cybercity.dk] has joined #ubuntu [02:34] gilles: sounds like a screwed xorg.conf to me === SireeBob [i=SireeBob@unaffiliated/sireebob] has left #ubuntu ["Leaving"] [02:35] I have a nvidia 7600 gs , kubuntu 7.04 kernel 2.6.20-16generic === Intxitxu [n=rromero@c-69-181-143-170.hsd1.ca.comcast.net] has joined #ubuntu [02:36] gilles: when it screws press Ctrl + Alt + F1, log in and run "sudo dpkg-reconfigure xserver-xorg" ----- go through selecting defaults till you get to driver and select "nv", that will give you back X and you can then try and sort it out === brownie17 [n=fraser@82.6.87.203.static.vic.chariot.net.au] has joined #ubuntu === luis [n=luis@221.Red-88-11-133.dynamicIP.rima-tde.net] has joined #ubuntu === MTecknology [n=MTecknol@138.247.246.129] has joined #ubuntu === mjasnick [n=mjasnick@193.34.20.254] has joined #ubuntu === b_9 [n=gcurtis@cpe-24-210-18-79.columbus.res.rr.com] has joined #ubuntu === antzen is now known as azn === Amo34 [n=juan@217.217.7.174.dyn.user.ono.com] has joined #ubuntu === pschulz01 [n=paul@ubuntu/member/pschulz01] has joined #ubuntu [02:37] I can't do ctrl+alt+F1 but I reboot in safe mode and change the driver name in xorg.conf [02:38] gtkpod is terrible, it erased all my playlists, and when i create a video playlist it doesn't create it === xRaich[o] 2x [n=raichoo@i5387EA49.versanet.de] has joined #ubuntu [02:38] renzo17: don't ping channels [02:38] how do I tell if my system has been compromised? === Lattyware [n=Latty@host86-133-33-116.range86-133.btcentralplus.com] has joined #ubuntu [02:38] jrib: just found out why not, sorry wasn't expecting that to happen [02:38] renzo17: no worries, I did the same thing once... [02:38] gnuskool - yeah thanks I already have audacity installed [02:39] it seems like im not getting much of anywhere. :| === karinlag [n=karinlag@cbs212.cbs.dtu.dk] has joined #ubuntu === azn is now known as antzen === greenpower [n=player@gprs-pool-1-027.eplus-online.de] has joined #ubuntu === karinlag [n=karinlag@cbs212.cbs.dtu.dk] has left #ubuntu ["Ex-Chat"] === Flegma [n=Michalek@devil.spacecom.cz] has joined #ubuntu [02:40] there is those lines in the xorg.0.log : (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure [02:40] (EE) NVIDIA(0): that there is a supported NVIDIA GPU in this system, and [02:40] (EE) NVIDIA(0): that the NVIDIA device files have been created properly. [02:40] (EE) NVIDIA(0): Please consult the NVIDIA README for details. [02:40] (EE) NVIDIA(0): *** Aborting *** === Pepin [n=Pippo@151.57.202.203] has joined #ubuntu === UpgradeBoy [n=user@e179196140.adsl.alicedsl.de] has joined #ubuntu [02:41] renzo17: what can I do === aetolus [n=aetolus@121.90.68.230] has joined #ubuntu [02:41] gilles: how are you installing the nvidia driver? === Moniker42 [n=sean1228@87-194-119-253.bethere.co.uk] has joined #ubuntu [02:41] from nvidias homepage? === johanvd [n=johan@h8441213242.dsl.speedlinq.nl] has joined #ubuntu [02:42] switchcat, you doing something similiar to this http://audacity.sourceforge.net/manual-1.2/tutorial_basics_4.html ? === kubi [n=kubi@cpc2-whit2-0-0-cust424.cdif.cable.ntl.com] has joined #ubuntu === metaphys [n=metaphys@201-75-223-89-am.cpe.vivax.com.br] has joined #ubuntu [02:42] Hi, I am wondering what is the advised location to put a shared folder for images etc. so all users of the compter can see them? [02:42] hey, i just bought a new graphics card (a 7950GT) to upgrade (from a 6800GT) is there anything i need to do before putting the new card in? === vecnah [n=vecna@vecna.vecnix.net] has joined #ubuntu [02:42] !nvidia [02:42] To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto [02:43] Filthpig, do i just keep the same drivers for the new card? [02:43] hi how do i enable direct rendering on my ati video card === Tribes [n=Tribes@pD9E84B82.dip.t-dialin.net] has joined #ubuntu === piti [n=pablo@mut38-1-82-67-65-78.fbx.proxad.net] has left #ubuntu ["Kopete] [02:43] gilles: first off (without sounding patronising) do you actually have an nvidia card? === acuster [n=acuster@154.Red-81-41-242.staticIP.rima-tde.net] has joined #ubuntu [02:43] renzo17, lol [02:44] filthip: first with apt-get install nvidia-glx-new it doesn't work so I install the official driver downloaded on the nvidia website so it doesn't work too so I finaly try with envy [02:44] how do i list different levels availables for a man page? === keito [n=keito@cpc2-leed2-0-0-cust11.leed.cable.ntl.com] has joined #ubuntu === Regor_ [n=roger@home.schibstedsok.no] has joined #ubuntu === grlubbb is now known as grlubb === misty_wrk [n=misty_wr@mail.borkholder.com] has joined #ubuntu [02:44] renzo17: yes of course I have a gefore 7600 gs (rev2) [02:44] Can someone please tell me what package db_recover is in? it's very important and I cannot find it [02:44] Moniker42: use the old driver is fine [02:44] I'm in feisty === yeniklasorr [n=yeniklas@unaffiliated/yeniklasorr] has joined #ubuntu === sommer_ [n=sommer@192.154.64.85] has left #ubuntu [] [02:44] gilles: cool, how did you install the driver the first time? [02:44] HELP!!! having trouble with ntfs3g please see this pastebin http://pastebin.com/m68625041. how can I get it to work????? [02:45] switchcat, also is your capture settings in alsamixer unmuted? [02:45] gilles, is the card detected? (i.e. view the output with lspci) === centrex_ [i=centrex@nat/digium/x-f2652e85285c5f9a] has joined #ubuntu === wisdom [n=wisdom@219.236.204.78] has joined #ubuntu [02:45] gilles: exactly what didn't work with apt? === areander [n=areander@60.39-201-80.adsl-dyn.isp.belgacom.be] has joined #ubuntu [02:45] have you edited your xorg.conf earlier? [02:45] How to start an executable file from command line in the background ? [02:45] keito, boot into Windows, run chkdsk , then reboot into Ubuntu === Adlai [n=leif@129.49.7.102] has joined #ubuntu === ShinSR71 [n=mb@82.101.254.223] has joined #ubuntu === sPooT [n=spoot@e142085.upc-e.chello.nl] has joined #ubuntu === fsckr [n=rich@pool-71-100-42-63.tampfl.dsl-w.verizon.net] has joined #ubuntu [02:46] yjwong: i don't have windows === Flegma [n=Michalek@devil.spacecom.cz] has joined #ubuntu === _martin__ [n=martin@p54AEAD4E.dip0.t-ipconnect.de] has joined #ubuntu [02:46] huh [02:46] filthpig: yes 01:00.0 VGA compatible controller: nVidia Corporation GeForce 7600 GS (rev a2) [02:46] yjwong: my MBR became corrupted so I ditched windows once and forever === dori [n=dori@wikipedia/Dori] has joined #ubuntu [02:46] you have a ntfs disk but not windows, keito? why? :S [02:46] keito: lol, do you have a boot disk? i think chdisk is on there [02:46] yjwong yes 01:00.0 VGA compatible controller: nVidia Corporation GeForce 7600 GS (rev a2) [02:47] how do i enable direct rendering on my ati card. i intalled the drivers and its working but glx info says directrendering:no and also i have this message Xlib: extension "XFree86-DRI" missing on display ":1.0". [02:47] yjwong: i have ultimate boot disk === _martin__ [n=martin@p54AEAD4E.dip0.t-ipconnect.de] has joined #ubuntu === Ex-Cyber [n=excyber@c-75-70-146-61.hsd1.co.comcast.net] has joined #ubuntu [02:47] !ati | kubi [02:47] kubi: To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto === _martin__ [n=martin@p54AEAD4E.dip0.t-ipconnect.de] has joined #ubuntu [02:47] Filthpig: read above ;0) i HAD ntfs === salah__ [n=salah@217-12-140.0505.adsl.tele2.no] has joined #ubuntu === ziroda1 [n=ziroday@cm158.kappa176.maxonline.com.sg] has left #ubuntu [] [02:47] filthpig apt work fine but when I reboot I have a black screen when the X server load [02:47] Filthpig: I want to backup the data then reformat to either ext3 or reiser etc etc === Flix_ [n=matiesz@modemcable029.163-56-74.mc.videotron.ca] has joined #ubuntu [02:48] Hheeeeeh [02:48] It's a-me Flix [02:48] i have been to that binarydriverhowto page and tried everything but still no direct rendering. canot play games === corpse_ [n=svoitenk@216.216.134.242] has joined #ubuntu [02:48] gilles: did you install the right package? [02:48] keito: http://www.schrockinnovations.com/chkdsk.php === HA [n=vili@dsl-olubras1-ff55c000-57.dhcp.inet.fi] has joined #ubuntu [02:48] renzo17: will take a look [02:48] cheers [02:48] found it, db4.xutil [02:49] /join #travian.temppeliherrat eldorado === brynjarh [n=brynjarh@dsl-149-97-250.hive.is] has joined #ubuntu [02:49] filthpig: yes I think because there is my graphic card in the suported list [02:49] renzo17: i have a sata drive ;0) [02:49] I install the nvidia-glx-*new package === corpse_ [n=svoitenk@216.216.134.242] has joined #ubuntu [02:50] I installed my Nvidia card no problems but... can anyone point me to a realy basic article on how groups work in ubuntu? I am trying to set up a shared folder for all users of the computer. === Hc [n=toffe@a88-112-4-210.elisa-laajakaista.fi] has joined #ubuntu [02:50] you got the driver disk for it? should have a floppy with it on or a cd that came with your mobo [02:50] gilles: funky. I have the same card [02:50] no problems at all [02:50] how can I change the default permissions/group for /dev/net/tun? I have this udev rule in 40-tun-rules, but /dev/net/tun still comes up as root/root: KERNEL=="tun", NAME="net/%k", MODE="0660", GROUP="kqemu" [02:50] gnuskool - yup. :( dunno if im ever gonna get this to work. [02:50] gilles: did you use kubuntu? [02:50] Filthpig: cool === kyja [n=kyja@c-75-68-187-223.hsd1.vt.comcast.net] has joined #ubuntu [02:51] its so simple with my digital voice recorder but i left that an hour away [02:51] Filthpig: yes I do [02:51] hmm [02:52] Filthpig: the black screen arrive when I must see the mouse cursor === jaw [n=jaw@203.200.201.49] has joined #ubuntu === gutts_ [i=gutts@ADijon-258-1-68-51.w90-6.abo.wanadoo.fr] has joined #ubuntu === gvsa123 [n=girard@125.60.241.233] has joined #ubuntu [02:52] does kubuntu have compiz pre-installed? In ubuntu I enabled my 3D acc through enabling Desktop Effects and installing drivers through there [02:52] switchcat, in system tray you got a volme icon, in preferences there is audigy listed in capture? [02:52] gilles: weird indeed [02:52] !kubuntu [02:53] Kubuntu is Ubuntu with KDE, the K Desktop Environment, instead of Gnome. See http://kubuntu.org for more information - For support: #kubuntu - See also !KDE === radhios [n=radhios@200.47.67.169] has joined #ubuntu [02:53] you can check for help over there, too [02:53] hi, i want to install sun-java6-jre onto Dapper Drake 6.06 LTS -- is that in some repository? I found it in deb http://us.archive.ubuntu.com/ubuntu/ feisty multiverse, but that's for fiesty === nickrud [n=nickrud_@adsl-69-230-161-27.dsl.irvnca.pacbell.net] has joined #ubuntu [02:54] !info sun-java6-jre [02:54] sun-java6-jre: Sun Java(TM) Runtime Environment (JRE) 6 (architecture independent files). In component multiverse, is optional. Version 6-00-2ubuntu2 (feisty), package size 6176 kB, installed size 14148 kB [02:54] ah, gilles, I believe I know your problem [02:54] Amaranth must i need dist-upgrade? right now i have 2.6.20-15-generic [02:54] when I think back I had a similar problem [02:54] ay... i've installed avidemux, kino, cinelerra... anymore suggestions for a simple video editing software that's not too complicated, but has features for a home user who just wants to combine clips, make transitions, maybe add a few text and the like? [02:54] Filthpig: really what is the solution [02:54] When both a nic and a modem, the /etc/ppp/resolv.conf at first gets used, then when dhcp refreshes nic IP, pppd DNS fails as the regular /etc/resolv.conf now takes precedence again. Any way around this? === g0ju [n=moo@dslb-088-072-167-193.pools.arcor-ip.net] has joined #ubuntu [02:54] you have to blacklist the other driver [02:54] thanks Paddy_EIRE, that's in the Feisty repositories, but I'm on Dapper Drake -- can I just use it? [02:54] I do not remember how, though === inflex [n=PLD@171.156.240.220.dynamic.dsl.comindico.com.au] has joined #ubuntu === Hobbsee [n=Hobbsee@ubuntu/member/hobbsee] has joined #ubuntu === Skiessi [n=qwe@dsl-roibrasgw1-fe88fb00-133.dhcp.inet.fi] has joined #ubuntu [02:55] hmm not sure jaw [02:55] I want to make a DVD ISO image of a directory on my HDD, what's the best software for that ? [02:55] !blacklist [02:55] To blacklist a module, edit /etc/modprobe.d/my_blacklist and add blacklist to the end of that list - To explicitly load modules in a specific order, list them in /etc/initramfs-tools/modules and type sudo update-initramfs -u === Flippeh [n=flippeh@p5488CE10.dip.t-dialin.net] has joined #ubuntu [02:55] i'll just try it, Paddy_EIRE and see if there is an error -- otherwise I'll download and install the java binary directly from sun === dfgas [n=dfgas@adsl-69-215-150-60.dsl.milwwi.ameritech.net] has joined #ubuntu [02:56] Amaranth i had a server shut down in terminal with compiz --replace with buncha errors. [02:56] yeah === TC14 [n=TC15@87.127.69.225] has joined #ubuntu [02:56] Filthpig: add it to /etc/modules/blacklist [02:56] is there anyone to explane me how to blacklist driver [02:56] labmicro4: no luck === jopix_ [n=jopi@puketti.lnet.fi] has joined #ubuntu [02:56] !blacklist | gilles [02:56] gilles: To blacklist a module, edit /etc/modprobe.d/my_blacklist and add blacklist to the end of that list - To explicitly load modules in a specific order, list them in /etc/initramfs-tools/modules and type sudo update-initramfs -u === aQlutchuw [n=kiosk@125.164.202.58] has joined #ubuntu [02:56] How to start an executable file from command line in the background ? === basti`lab0 [n=basti@M3bc9.m.pppool.de] has joined #ubuntu === Rothgar` [n=admin@ppp201-15.static.internode.on.net] has joined #ubuntu === misty_wrk [n=misty_wr@mail.borkholder.com] has left #ubuntu [] [02:57] yeniklasorr: append and & to the command line [02:57] an* === DoctorMO [n=mowens@static-68-236-120-95.bstnma.east.verizon.net] has joined #ubuntu [02:57] thank you but which module i blacklist [02:57] I gotta go now, gilles, but hang around and see if you can get contact with crdlb, he's amazing [02:57] yeniklasorr: what type of executable === kung [n=kung@dslb-084-059-125-132.pools.arcor-ip.net] has joined #ubuntu [02:57] gilles: try lsmod and find the nv-module [02:57] Filthpig: ok thank you === Chinaski1 [n=Druganti@host227-181-dynamic.1-87-r.retail.telecomitalia.it] has joined #ubuntu [02:58] hello [02:58] renzo17 erUSUL : Working like this "./somefile" [02:58] good luck gilles! === Gasten [n=Gasten@h52n9c1o1095.bredband.skanova.com] has joined #ubuntu === cl3ft [n=cl3ft@210-84-0-184.dyn.iinet.net.au] has joined #ubuntu === mindtrap [n=bootle@port-ip-213-211-244-6.reverse.mdcc-fun.de] has joined #ubuntu [02:58] i can't get tracker to index files on my ntfs disk... [02:59] i specified folders in tracker.cfg file [02:59] I'm having trouble unblocking the postgres port... I tried this line: "iptables -A INPUT -p tcp --dport 5432 -j ACCEPT" but i still can't connnect. Any ideas? [02:59] Filthpig: ./somefile & [02:59] it does not find the files [02:59] erUSUL ok [02:59] somehow, apache2ctl graceful doesnt do anything when run from a cronjob, any ideas? === [GuS] [n=gdnet@190.48.120.184] has joined #Ubuntu === NET||abuse [n=lab@87-198-142-78.ptr.magnet.ie] has joined #ubuntu === Neoxygen [n=neoxygen@84-74-168-79.dclient.hispeed.ch] has joined #ubuntu [03:01] erUSUL : Didn't work ./somefile & [03:01] after installing nvidia driver, i have one resolution of 800x600, someone please tell me this can be fixed [03:01] gumuz, try redirecting the output to some file? [03:01] when indexing , tracker doesn't resolve aliases to ntfs disk too === jcaspe [n=jcaspe@203.111.234.21] has joined #ubuntu [03:01] any help? === justinm [n=justin@justinlq.liquidweb.com] has joined #ubuntu === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu === zhengfish [n=zhengfis@124.79.109.5] has joined #ubuntu [03:02] yjwong: i'll try [03:02] taime1: install nvidia-settings and configure the resolutions with that [03:02] Hey all, i'm using samba here to share some directories on my laptop, but whenever i copy a file or make a directory onto mylaptop from my windows box's, the files owned by nobody:nobody === diablos_raven [n=diablo@c-71-197-65-97.hsd1.ca.comcast.net] has joined #ubuntu [03:02] heyadayo: pastebinning the output of 'sudo iptables -L' may help [03:02] renzo17: been at this for 8 hrs, nvidia-settings thinks i have only one res also.. and will not allow me to change it === Cykus [n=cykus@tkp30-3.rybnet.pl] has joined #ubuntu === marl [n=matt@albacom.plus.com] has joined #ubuntu === sipior [i=sipior@jop56.nfra.nl] has joined #ubuntu === Teste [n=guilherm@201.29.4.44] has joined #ubuntu [03:03] i use tracker 0.6.0 [03:03] taime1: 8 hours, that impressive.....have you tried adding the resoltuions to your xorg.conf? [03:03] ubuntu 7.0.4 === timmyd [n=timmy@75.139.139.49] has left #ubuntu ["Ex-Chat"] [03:03] renzo17: yes, i have tried entering all, one, none, you name it. and after reconfiguring x GOD knows how many times, still at 800x600.... === rabbi22 [n=fdsfsd@user18-096.satfilm.net.pl] has joined #ubuntu [03:04] taime1: did you install via repos? which card do you have? [03:04] this problem is totally uneffected by what is in xorg.conf [03:04] Anyone know of a way to defragment an ntfs partition from within ubuntu? [03:04] thanks Paddy_EIRE, I just installed the latest self extracting bin from sun [03:04] yeniklasorr: what didn't work? === Ballena [n=Tybalt@h129n2fls311o1100.telia.com] has joined #ubuntu [03:04] Filthpig: yes. i installed the correct driver for my geforce 7600. [03:05] jaw, is it working [03:05] So with this samba setup, i'm having to console in and sudo chown -R me:me the files that were put on my samba share to get access to them === Frogzoo [n=Frogzoo@202.155.165.25] has joined #ubuntu === mads_dK [n=mads@usrgw.stubnet.dk] has joined #ubuntu [03:05] erUSUL : processes are still showing === boarderwinterman [n=boarder-@p508DD782.dip.t-dialin.net] has joined #ubuntu [03:05] erUSUL : It is a shoutcast server [03:05] anyone here doing simple video editing on ubuntu? [03:06] gvsa123, hehe, I hear alot of negative talk about video editing on linux in general [03:06] IF it helps, this began when i upgraded my card from an older nvidia, and thus, ubuntu recognized the need for a newer driver. but then all the correct resolutions i was experiencing uder the old card are now unobtainable... === shinao1 [n=shinao1@196.207.1.30] has joined #ubuntu === tinin [n=tinin@73.Red-83-32-85.dynamicIP.rima-tde.net] has joined #ubuntu [03:06] gvsa123, are you using any package at the moment? [03:06] yeniklasorr: you mean that they are printing things to the terminal? [03:06] gvsa123, or are you hunting for a name of a package? [03:06] erUSUL : yes === soymrmike [n=mrmikev2@209.203.97.18] has joined #ubuntu [03:06] !anyone | gvsa123 [03:06] gvsa123: A large amount of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? === loca|host [n=tux@196.203.53.221] has joined #ubuntu [03:06] Ive installed ubuntu 7.04 and when I select Ubuntu to start from GRUB menu, then system starts to loading and then there is an error: Hub: connect debounce failed, port 9 disabled. What can I do to fix it out? [03:06] ubotu: do you know which driver i must blacklist [03:07] NET||abuse: i've tried out several...right now i have avidemux, kino and cinelerra. [03:07] Paddy_EIRE: i'm still setting up [03:07] quit The Swordfish === winwinwin [n=chatzill@unaffiliated/davidhkmrpowers] has joined #ubuntu === Yoshidu62 [n=ngressie@som62-1-89-84-104-56.dsl.club-internet.fr] has joined #ubuntu === indirizzo [n=erik@h8441203189.dsl.speedlinq.nl] has joined #ubuntu === simianspaceman [n=simian@ip72-192-33-185.ri.ri.cox.net] has joined #ubuntu [03:08] Hi, does anybody know about Nx? How can I make this machine to act as a server?, I have only found a gui to use the clien === meuserj [n=meuserj@indianalifesciences.com] has joined #ubuntu [03:08] yeniklasorr: you can no avoid that by just putting the in background just redirect the output to /dev/null or any other file... e.g. './somefile 2&>1 /dev/null &' that will redirect normal autput and errors to /dev/null (the black hole of any unix ;)) [03:08] NET||abuse: anymore suggestion? a simple linux version of MS movie maker would do for my needs === redarrow [n=redarrow@dslc-082-082-101-112.pools.arcor-ip.net] has joined #ubuntu [03:09] well this is the problem, :P not sure what is any use on that front [03:09] use synaptic to look for video edditing programs === larry_ [n=larry@90.189.142.168] has joined #ubuntu [03:09] i think there are several available === profanephobia [n=profanep@74-131-141-126.dhcp.insightbb.com] has joined #ubuntu [03:10] hello [03:10] help? [03:10] erUSUL : ok thanks a lot === larry_ [n=larry@90.189.142.168] has left #ubuntu ["Ex-Chat"] [03:10] even more if you enable the universe and multiverse sources === inflex has MainActor .. but sadly, like a lot of commercial software for linux... it's now folded :( [03:10] !ask Teste [03:10] Sorry, I don't know anything about ask teste - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [03:10] err.. [03:10] Teste: What do you need? [03:10] !tracker [03:10] Services to index files for fast searching include: Beagle (front-ends: beagle, catfish, gnome-main-menu, mozilla-beagle for !GNOME; kerry, kio-beagle for !KDE; beaglefs for !CLI) - Tracker (tracker-search-tool, libdeskbar-tracker for GNOME; tracker-utils for CLI) - Strigi (strigi-applet, strigi-client for KDE, strigi-utils for CLI) - Kat (for KDE) - Pinot (and pinot-applet for GNOME) - Doodle (for CLI) [03:10] gvsa123, http://www.getdeb.net/category.php?id=12 === ybite [n=ybite@125.160.254.10] has joined #ubuntu [03:11] After upgrading to new nvidia driver (upgraded card), i have one resolution, 800x600. problem is unaffected by xorg.conf, nvidia-settings will not allow change in res, and reconfiguring x is usless. What Am I Doing Wrong? === haw1 [n=matthew@keele-a233-82.airyork.yorku.ca] has joined #ubuntu [03:11] use envy === inflex [n=PLD@171.156.240.220.dynamic.dsl.comindico.com.au] has left #ubuntu ["wrong] === renatofilho_ [n=renato@200.184.118.132] has joined #ubuntu [03:11] taime1 [03:11] yes [03:11] Paddy_EIRE: i'll check it out === Moniker42 [n=sean1228@87-194-119-253.bethere.co.uk] has joined #ubuntu [03:11] taime1: That will change in Gutsy.. for now you'll need to edit your xorg.conf [03:11] how do i monitor the temp of my graphics card? [03:11] envy is a program that lets you install and configure ati an nvidia drivers === Gaaston [n=hledoux@18.175-65-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu [03:11] taime1: yeah, or use envy :) [03:11] !envy [03:11] envy is a script that may leave you envious of those who have not used it, use the resticted manager to install binary drivers or use the instructions on the wiki, this script may break your machine very badly! === meuserj_ [n=meuserj@indianalifesciences.com] has joined #ubuntu [03:12] Moniker42, nvidia has its own thermal monitor in nvidia-settings === keito [n=keito@cpc2-leed2-0-0-cust11.leed.cable.ntl.com] has joined #ubuntu [03:12] Vlet: the problem is not affected by whats in xorg.conf.... i wish it were that easy [03:12] as for the others, i'm not too sure === indirizzo [n=erik@h8441203189.dsl.speedlinq.nl] has joined #ubuntu === larry_ [n=larry@90.189.142.168] has joined #ubuntu [03:12] yjwong, i just found it thanks :) [03:12] taime1: Try out envy then === larry_ [n=larry@90.189.142.168] has joined #ubuntu [03:12] !envy [03:12] envy is a script that may leave you envious of those who have not used it, use the resticted manager to install binary drivers or use the instructions on the wiki, this script may break your machine very badly! === dfgas [n=dfgas@adsl-69-215-150-60.dsl.milwwi.ameritech.net] has joined #ubuntu === MTecknology [n=MTecknol@138.247.246.129] has joined #ubuntu === Peter_Leck [n=peter@i577A30DD.versanet.de] has joined #ubuntu [03:13] just a warning though, i've never had problems with it === redarrow is now known as Xaloor [03:13] I have been having this problem with soft lock ups and x.org restarting i get the error message BUG: soft lockup on CPU#0. Any ideas? [03:13] yeniklasorr: no problem ;) === d3ck4_ [n=d3ck4@204.15.133.29] has joined #ubuntu [03:14] Paddy_EIRE: any special reason why there aren't included in the repositories? like instability or something? [03:14] *they === DrColossus [n=blah@220-245-204-122.tpgi.com.au] has joined #ubuntu [03:14] HEY is there a way to make appointments in the calendar (accessible from the time/date on the top panel in gnome) not open in evolution and open with another app ie; sunbird or thunderbird with lightning extension? === marco_ [n=marco@host194-25-dynamic.50-82-r.retail.telecomitalia.it] has joined #ubuntu === constrictor [n=constric@82-70-24-5.dsl.in-addr.zen.co.uk] has joined #ubuntu [03:14] salve === urthmover [n=me@adsl-68-94-224-35.dsl.rcsntx.swbell.net] has joined #ubuntu === Markuz [n=cereia@iritip06.polito.it] has joined #ubuntu [03:14] Paddy_EIRE, hehe, i suck, i've never gone to that site before.. awsome [03:15] gvsa123, not really sure... although many of those apps can be found in the repos [03:15] NET||abuse, :D === rm130 [n=rm130@vpn.conroeisd.net] has joined #ubuntu [03:15] can we speak italian? [03:15] Is there some program that can detect if I have the right drivers or not for my computer? === G3R [n=germanp@53-148-235-201.fibertel.com.ar] has joined #ubuntu === Markuz [n=cereia@iritip06.polito.it] has joined #ubuntu [03:15] similar to driver genius for windows [03:15] because I'm pretty sure I don't have the correct drivers for this machine's video card [03:15] NET||abuse, here is the repo if you would like to recieve updates from getdeb for any apps you install there 'deb http://ubuntu.org.ua/ getdeb/' [03:15] Paddy_EIRE: ah yeah... hmmm... got a bet... LiVES... would you happen to have used any of these? [03:15] marc__, that depends, can you? :) [03:16] rm130: not that i know of, but if everything works you probably have the right drivers, the only two you really have to worry about are video drivers and wireless drivers === qcshzihnus [n=qcshz@222.66.104.106] has joined #ubuntu === mojojojo_ [n=jth@dhm20.neoplus.adsl.tpnet.pl] has joined #ubuntu === indirizzo [n=erik@h8441203189.dsl.speedlinq.nl] has joined #ubuntu [03:16] renzo17, Yeah I'm trying to get the correct video drivers === gnuskool [n=chatzill@82.99.36.199] has joined #ubuntu [03:16] rm130: what videa card have you got? [03:16] it's an intergrated card === G3R [n=germanp@53-148-235-201.fibertel.com.ar] has joined #ubuntu [03:17] how can I check? [03:17] gvsa123, never used it PiTiVi is nice and simple though [03:17] any idea what chipset? the command "lspci -v" will give you some info === monkeyBox [n=bend@69.15.248.2] has joined #ubuntu [03:17] Paddy_EIRE: i'll check that out as well... === kousotu [n=kousotu@adsl-68-79-207-137.dsl.emhril.ameritech.net] has joined #Ubuntu [03:17] gvsa123, and pitivi is in the repos [03:17] !info pitivi | gvsa123 [03:17] gvsa123: pitivi: non-linear audio/video editor using GStreamer. In component universe, is optional. Version 0.10.2-1 (feisty), package size 149 kB, installed size 900 kB [03:17] Paddy_EIRE: funny it didn't appear with the search "video editing" === incorrect [n=incorrec@host81-138-107-161.in-addr.btopenworld.com] has left #ubuntu ["Ex-Chat"] [03:18] hello everyone! is there a way to program c# in ubuntu? [03:18] gvsa123, some dont [03:18] ? === MoLE_ [n=mole@ppp121-45-121-42.lns11.adl6.internode.on.net] has joined #ubuntu [03:18] !paste [03:18] pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic) === raphink [i=raphink@ubuntu/member/raphink] has joined #ubuntu [03:18] Paddy_EIRE: thanks... arrggg... my installation is crowded with video editing apps!!! [03:18] jcaspe, http://ubuntuforums.org/showthread.php?t=290896 === Golyadkin [n=Golyadki@cp196327-b.roemd1.lb.home.nl] has joined #ubuntu === Coole^ [n=justin@71-212-52-231.tukw.qwest.net] has joined #ubuntu [03:19] jcaspe, that should help you [03:19] tify === ozzloy_ [n=ozzloy@unaffiliated/ozzloy] has joined #ubuntu [03:19] renzo17, http://paste.ubuntu-nl.org/36428/ [03:19] gvsa123, when removing them use 'sudo aptitude purge name_of_app' [03:19] tnx, profanephobia [03:19] where whould I go to fid mouse icons? [03:19] why does it say access denied? [03:19] wtf: http://img510.imageshack.us/img510/7159/screenshot3mn1.png <-- This happens when I type the deskbar shortcut... === Luka1 [n=salawier@87.249.136.246] has left #ubuntu [] === Jack_Sparrow [n=jack@adsl-69-227-94-40.dsl.sndg02.pacbell.net] has joined #Ubuntu [03:20] Paddy_EIRE: that removes ABSOLUTELY everything? [03:20] If I remove evolution is there any way to retain the calendar functionality (found top-right of gnome desktop by default) [03:20] kousotu, settings -> prefrences -> mouse -> pointers [03:20] yep gvsa123 [03:20] Everything was working fine before I reinstalled OS on the computer [03:20] profanephobia: I meant online [03:20] now like I can't do anything 3D [03:20] Paddy_EIRE: isn't there some kind of inconsistency when an app is installed and removed differently... i.e. synaptics and then aptitude or apt-get [03:21] how do i see my kernel configuration? [03:21] im on feisty === Xaloor is now known as redarrow [03:21] profanephobia: and that's not right either === grabbis [n=anders@static217-221.adsl.no] has joined #ubuntu === noodles13 [n=ghost@CPE-69-76-217-28.kc.res.rr.com] has joined #ubuntu [03:21] gvsa123, not really ... stick to this guide 1 sec [03:21] how do i unrar folders that are in 3 parts in ubuntu????? === michaelkohwj [n=di@bb219-74-108-78.singnet.com.sg] has joined #ubuntu [03:21] under places, how do i add another folder there? i did it once for music but i can't get it again [03:21] rm130: run it using sudo [03:22] ok [03:22] rm130: no idea why access is denied, but you have a VIA chipset.....let me find out the best driver for you, hold on [03:22] rm130: what are you trying to run? [03:22] kousotu, it does for me [03:22] Vlet, lspci -v [03:22] noodles13, i think you can add the folder as a Bookmark in Nautilus, then it will appear within the Places menu [03:22] http://paste.ubuntu-nl.org/36428/ [03:22] thanks renzo17 === cp [n=cp@199.79.183.36] has joined #ubuntu [03:22] Vlet, it says Capabilities: under some stuff [03:22] rm130: yeah, I guess you need to run that as: sudo lspci -v === redarrow is now known as Xaloor === aseyrk [n=chatzill@cobol.fiz-chemie.de] has left #ubuntu [] === Golyadkin [n=Golyadki@cp196327-b.roemd1.lb.home.nl] has left #ubuntu ["Leaving"] [03:23] rm130: https://help.ubuntu.com/community/OpenChrome hope that helps.......scroll down for 3d === ellen_ [n=ellen@pool-70-18-129-160.pghk.east.verizon.net] has joined #ubuntu [03:23] rm130: that likely means that regular users do not have the rights to probe hardware for certain things - doesn't necessarily mean you can't use em for 3d apps [03:24] gvsa123, http://www.ubuntugeek.com/cleaning-up-all-unnecessary-junk-files-in-ubuntu.html [03:24] where whould I go to find mouse icons online? [03:24] yjwong: thanks! that's exactly it. [03:24] Vlet, renzo17, here is the more complete lspci -v http://paste.ubuntu-nl.org/36429/ === garol [n=garol@luhy.skylan.sk] has joined #ubuntu [03:24] kousotu: gnome-look.org [03:24] yjwong: i got it once, and i spent forever clicking everything to try and find it again [03:24] kousotu: gnome-look.org kde-look.org [03:24] renzo17, checking out the site. Thanks === RickH [n=rick@c-68-58-106-180.hsd1.in.comcast.net] has joined #ubuntu [03:24] Jack_Sparrow: thank you [03:25] kousotu: kde-look.org or maybe gnome-look.org [03:25] Oh great. I re-added deskbar to my panel and now this is what happens (see top and bottom of img): http://img214.imageshack.us/img214/2268/screenshot4xu7.png [03:25] no problem, noodles13 =) [03:25] E: Couldn't find package xserver-xorg-video-openchrome [03:25] kousotu: see the links at the right === pips1 [n=philipp@105.142.77.83.cust.bluewin.ch] has joined #ubuntu [03:25] Paddy_EIRE: wow thanks... this is the last "basic" application i need to find before i can give a copy to my uncle... don't want him to be disappointed with ubuntu... [03:25] have you enabled universe and multiverse, rm130 [03:25] gvsa123, he wont.. :D [03:25] reading on === ybite [n=ybite@125.160.254.10] has left #ubuntu ["Ex-Chat"] === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu === zyth [n=zyth@wnpgmb06dc1-0-52.dynamic.mts.net] has joined #Ubuntu [03:26] Where would I get help with encoders like DivX/H.264 on Ubuntu? [03:26] michaelkohwj: thank you === redarrow [n=redarrow@dslc-082-082-101-112.pools.arcor-ip.net] has joined #ubuntu [03:26] rmenable the extra repos and update as in apt-get update [03:26] gvsa123, providing you point out ubuntu/linux's strengths and keep a healthy system [03:26] renzo17, when I type sudo apt-get build-dep xserver-xorg-video-via it says: connect (111 Connection refused) [IP: 91.189.89.8 80] [03:26] RickH: they're in ubuntu, gstreamer plugins [03:26] renzo17, can I get this from synaptic? [03:26] !universe | rm130 [03:26] rm130: The packages in Ubuntu are divided into several sections. More information at https://help.ubuntu.com/community/Repositories and http://www.ubuntu.com/ubuntu/components - See also !EasySource [03:26] kousotu: Do they come with docs on how to use? [03:27] rm130: synaptic IS apt-get === MBR666 [n=bryan@pool-141-149-245-211.buff.east.verizon.net] has joined #ubuntu [03:27] Paddy_EIRE: for the most part probably.. he was pretty impressed with the ubuntu vs vista video on youtube... [03:27] renzo17, yeah but when I try to do apt-get in terminal it doesn't work but when I use synaptic it does [03:27] in terminal it keeps saying that my ip is refused === sandesh [n=sandesh@122.167.58.32] has joined #ubuntu [03:27] Paddy_EIRE: that's something i'm not sure i'm knowledgeable myself... lol [03:27] rm130: if synaptic is open you cant use the termnal, you can only use one at a time [03:27] i mucked up my fstab, mtab files. i want to mount hdb1 to /media/hdb1 it's a fat32 drive. i made an attempt to format it to ext3 but it's been hosed ever since. [03:28] renzo17, yeah I have synaptic closed [03:28] When connected pppd, DHCP refresh on eth0 makes /etc/resolv.conf default again when should stay /etc/ppp/resolv.conf until modem disconnects. any ideas? [03:28] rm130: apt-get install xxx dosent work but synaptic does? [03:28] yeah [03:28] while compiling c programs in ubuntu its showing " error: stdio.h: No such file or directory [03:28] rm130: use synaptic then, its the same either way [03:28] wht to do?? [03:28] yeah looking for: xserver-xorg-video-openchrome under synaptic [03:28] gvsa123, before anyone switches to linux they need to educate themselves as much as possible.. as not to blame linux or ubuntu for whatever probs they have === Crusher [n=You@ppp121-45-61-40.lns11.adl2.internode.on.net] has joined #ubuntu [03:28] how do i unrar folders that are in 3 parts in ubuntu????? === ShinSR-71 [n=mb@82.101.254.223] has joined #ubuntu [03:28] !rar > keito (see the private message from ubotu) [03:28] It's ALL BSD's FAULT! [03:29] sandesh: did you install build-essential? [03:29] *sigh( damn firefox... [03:29] keito: Open the first and the unrar utility should recognize the next parts [03:29] no .. i will install [03:29] how do i fix xubuntu 704 so that it automounts my drive again. and in the directory i want it mounted in? [03:29] thanks jrib [03:29] it hasn't been doing but I'll march on 80) === jhatlelid [n=jhatleli@nat-132.atmel.no] has joined #ubuntu === ChTiPowA [n=knoppix@8.211.20.81.dynamic.adsl.abo.nordnet.fr] has joined #ubuntu [03:29] jrib: ubotu not here? [03:29] next one..... HEY is there a way to make appointments in the calendar (accessible from the time/date on the top panel in gnome) not open in evolution and open with another app ie; sunbird or thunderbird with lightning extension? [03:29] !ping [03:30] pong [03:30] !fstab | MBR666 [03:30] MBR666: The /etc/fstab file indicates how drive partitions are to be used or otherwise integrated into the file system. See http://www.tuxfiles.org/linuxhelp/fstab.html and !Partitions [03:30] x2vnc users? My mouse does not position correctly on remote computer [03:30] keito: did you not receive a private message? [03:30] !rar [03:30] rar is a non-free archive format created by Rarsoft. For instructions on accessing .rar files through the Archive Manager view https://help.ubuntu.com/community/FileCompression. There is a free (as in speech) unrar utility as well, see !info unrar-free === GlasstuX [n=exmethix@p4FC4F826.dip.t-dialin.net] has joined #ubuntu [03:30] Paddy_EIRE: yeah... so far the only difficulty i've had is adjusting to new applications and learning how to use them. plus learning the basic terminal commands of course... i try to keep away from that even tough a lot has been said of it's advantages... :) [03:30] weird..don't see it === esimon [n=esimon@194.51.71.190] has joined #ubuntu === Xaloor [n=Xaloor@dslc-082-082-101-112.pools.arcor-ip.net] has joined #ubuntu === bullgard4 [n=detlef@p54BF0775.dip0.t-ipconnect.de] has joined #ubuntu [03:30] Salut tout le monde :) [03:30] rm130: have you enabled the multiverse and universe repos? [03:30] !info unrar-free [03:30] unrar-free: Unarchiver for .rar files. In component universe, is optional. Version 1:0.0.1+cvs20060609-1 (feisty), package size 17 kB, installed size 80 kB [03:30] keito: no on the calendar [03:30] keito: don't use free... === _GoRDoN__ [n=heikki@a88-112-169-13.elisa-laajakaista.fi] has joined #ubuntu === pips1 [n=philipp@105.142.77.83.cust.bluewin.ch] has left #ubuntu ["Ex-Chat"] [03:30] jrib: k [03:31] gvsa123, the terminal is quite simple irreplaceable... nothing cuts it outside of the cli [03:31] :D [03:31] Dites moi je recherche un site qui donne toutes les distributions Linux, j'en avais un il tait anglophone mais je me rappelle plus de quoi il s'agit ? [03:31] nickrud: gutted [03:31] Quelqu'un se rappelle ? === pips1 [n=philipp@105.142.77.83.cust.bluewin.ch] has joined #ubuntu === yrlnry_ [n=mjd@SEASNet-38-023.seas.upenn.edu] has joined #ubuntu [03:31] I'm on main server [03:31] what should I do if I get this: GPG error: http://security.ubuntu.com feisty-security Release: invalid signatures [03:31] nickrud: would be awesome to use sunbird/lightning instead [03:31] yeah [03:31] got multiverse and universe === a[2121] e [n=a2121e@18.97.95.219.trm01-home.tm.net.my] has joined #ubuntu [03:31] Hi :) [03:31] keito: nah, evolution is the wave of the future ;) [03:31] Sry did not see that was english lol [03:31] and then apt asks me to run apt-get update again [03:31] nickrud: no hotmail [03:31] hello [03:32] but I got GPG error: http://security.ubuntu.com feisty-security Release: invalid signatures from apt-get update anyway [03:32] I'm looking for a website which give you all distributions linux, i had one but i don't remember [03:32] rm130: close synaptic and run "sudo apt-get update" first, then try again [03:32] someone know that ? [03:32] ChTiPowA: distrowatch.org [03:32] distrowatch thank you ^ [03:32] or net? [03:32] :) === Cone [n=fans@60.213.45.175] has joined #ubuntu === esimon [n=esimon@194.51.71.190] has left #ubuntu ["Ex-Chat"] === dj_ [n=neo@80.178.74.71.adsl.012.net.il] has joined #ubuntu === stickto [n=stickto@218.82.235.153] has joined #ubuntu === tlucas [n=tom@saintjohns.demon.co.uk] has joined #ubuntu [03:32] or com! [03:32] thank you nickrud :)) [03:32] whos better: linux or windows? === Cone [n=fans@60.213.45.175] has left #ubuntu [""] [03:33] !offtopic | jcaspe [03:33] jcaspe: #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome! === private_guy [n=private_@212.35.82.138] has joined #ubuntu [03:33] that website already explains what i know. my problem is implementing it [03:33] Hi guys :D === PPG [n=admin@77.73.187.210] has joined #ubuntu [03:33] renzo17, see: http://paste.ubuntu-nl.org/36430/ [03:33] I was just wondering If there is an FTP program for ubuntu and will Firewall block FTP connections? i'm currently using Ubuntu :) [03:33] !ftp | private_guy [03:33] jcaspe, linux [03:34] private_guy: FTP clients: !Nautilus, !gFTP (for !GNOME) - !Konqueror, !Kasablanca, !KFTPGrabber (for !KDE) - See also !FTPd [03:34] nickrud, its distrowatch.com that works thank you very much :) [03:34] Oh so [03:34] whats the default FTP program [03:34] which comes with Linux [03:34] private_guy: gftp, ncftp, fireftp in firefox, and it doesn't block outgoing [03:34] because im new at this :d === b33r- yawns [03:34] rm130: thats weird. dunno if that means the repos are down or there is something wrong with your config [03:34] private_guy: nautilus is the default file browser on nautilus, it can view ftp as well [03:34] how do i use fstab to automount correctly my hdb1 drive? [03:34] works for you? [03:34] !enter | private_guy [03:34] private_guy: Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation! [03:34] tlucas: if linux is better, why lots of people keep using windows? [03:35] renzo17, I installed unichrome from synaptic but couldn't find openchrome === brian_ [n=brian@125.164.202.155] has joined #ubuntu === psyalex [n=alex@p549A7462.dip.t-dialin.net] has joined #ubuntu [03:35] Sorry ubotu, but I didn't get your question :( [03:35] MBR666: filesystem? [03:35] i tried formatting my drive to another filesystem and then switched back. but it won't mount without being root now and not in the directory i specified [03:35] *your telling m [03:35] *me [03:35] jcaspe: Please take that to offtopic... === sergio [n=sergio@83.138.211.82.dyn.user.ono.com] has joined #ubuntu === feklee_ [n=feklee@pD9E39D6F.dip.t-dialin.net] has joined #ubuntu [03:35] jcaspe, because they often don't know that there is any alternative (other than Mac OS) === zyth [n=zyth@wnpgmb06dc1-0-52.dynamic.mts.net] has joined #Ubuntu [03:35] jrib, i went from fat32 to ext3 and back to fat32. [03:35] jcaspe, or, they think that it would be too techy or complicated [03:35] !vfat > MBR666 (see the private message from ubotu) === kRush [n=krush@f049007083.adsl.alicedsl.de] has joined #ubuntu [03:36] rm130: go to https://help.ubuntu.com/community/OpenChrome and scroll down to the "Deb packages Repo" and follow the instruction there [03:36] Just thought to give Ubuntu a try, using the 6.10 image from http://www.thoughtpolice.co.uk/vmware/ [03:36] jcaspe, and also compatibility === praet [n=praet@wsip-68-15-32-50.ri.ri.cox.net] has joined #ubuntu [03:36] However, it doesn't boot under VMware [03:36] tlucas: #ubuntu-offtopic to discuss linux vs. windows, not here [03:36] jcaspe, they are 2 different OS's you can't compare which one is better [03:36] I get: Unknown interrupt or fault at EIP ... [03:36] jrib, soory [03:36] feklee_: then you'd probably be better off asking them how they built it [03:37] feklee_, Ubuntu images are not known to have problems with VMWare === GlasstuX [n=exmethix@p4FC4F826.dip.t-dialin.net] has joined #ubuntu === xeer [n=xeer@71.80.149.7] has joined #ubuntu [03:37] except the Gutsy release of course (with vmhgfs and vmxnet) === tlucas [n=tom@saintjohns.demon.co.uk] has left #ubuntu [] === axel_ [n=axel@c-6dc5e755.042-60-6d6c6d2.cust.bredbandsbolaget.se] has joined #ubuntu [03:37] nickrud, I read in some forums that there's a problem with some CPUs and Ubuntu server's default kernel. [03:37] from the site: do I get http://www.openchrome.org/snapshots/ubuntu/xserver-xorg-driver-via_0.1.32-1_i386.deb === andywxy [n=chatzill@221.7.98.62] has joined #ubuntu === axel_ is now known as jultomten [03:37] or: http://www.openchrome.org/snapshots/ubuntu/libxvmc_0.1.32-1_i386.deb [03:37] hello [03:37] yjwong, Seems that they've problems with certain CPUs. === tlucas [n=tom@saintjohns.demon.co.uk] has joined #ubuntu [03:37] tlucas: tnx, i just wondering of it... [03:38] yjwong, I wonder whether there's a kernel option that solves the problem. === ura [n=ura@151.36.177.178] has joined #ubuntu === edman007 [n=edman007@ool-44c28ff1.dyn.optonline.net] has joined #ubuntu [03:38] feklee_, maybe that's it. VMWare is emulating/providing access to your true CPU anyway [03:38] jcaspe, that's my hypothesis anyway [03:38] will it be easy to upgrade from Feisty to Gutsy? === Xaloor [n=Xaloor@dslc-082-082-101-112.pools.arcor-ip.net] has left #ubuntu [] [03:38] jultomten: point and click === triske2006 [n=tony@pdx01pncpccgw01.pdx01.inflow.net] has joined #ubuntu === BlehBleh [n=jwgreene@auburn-1060.megalink.net] has joined #ubuntu [03:38] jultomten: update-manager will let you know and offer a button for you to press === wildur [n=wildur@1-2-2-8a.spa.sth.bostream.se] has joined #ubuntu [03:38] great === genii sips a coffee [03:38] feklee_, I'm not sure about noapic and similar things, but you can try [03:38] i look forward to it === reon [n=reon@dsl-244-165-223.telkomadsl.co.za] has joined #ubuntu === nickrud goes to make some, sounds good [03:39] yjwong, I assume that I'm out of luck - judging from what I found on the net (acpi=off doesn't work for me). Hm, maybe I should try noapic, but I'm not too optimistic. === Just [n=JustIn@78-62-6-183.ip.zebra.lt] has joined #ubuntu [03:39] noapic works for me [03:39] well, that's great hypothesis. im sorry for my annoying question, anyway. [03:39] my feisty has infact become worse since i first installed it === poncho1 [n=poncho@adsl-75-54-64-192.dsl.ksc2mo.sbcglobal.net] has joined #ubuntu [03:39] ACPI shouldn't be the problem, because VMWare always reports power status as up, unless you checked the "Report battery information to guest" option === BlehBleh [n=jwgreene@auburn-1060.megalink.net] has left #ubuntu ["Ex-Chat"] [03:40] rm130: could you pastebin you xorg.conf a sec /etc/X11/xorg.conf [03:40] *Does MIRC work with Linux? === lousygarua [n=lousygar@bzq-79-178-0-162.red.bezeqint.net] has joined #ubuntu [03:40] hopefully gutsy will be more stable [03:40] I need help resizing my Ubuntu partition. I deleted my windows partition which was the first one. I now want to resize ubuntu to the beginning of the old windows partition. Currently the space is unallocated but gparted wont allow me to resize it. === marl_ [n=matt@82-40-218-233.cable.ubr01.dunb.blueyonder.co.uk] has joined #ubuntu === homanj [n=homanj@24-197-201-200.dhcp.roch.mn.charter.com] has left #ubuntu [] [03:40] jultomten: What all did you install add or change === psyalex [n=alex@p549A7462.dip.t-dialin.net] has left #ubuntu ["Ex-Chat"] [03:40] private_guy: try it and see. [03:40] Is that a Yes Or No savetheworld? lol [03:40] reon: you cant format a mounted drive, you could use the gparted live cd [03:40] i have done every update there is [03:40] You appear to be spamming the pastebin. I hate spammers so I won't let you. If you're not attempting to spam, please enable javascript so you can pass the antispam check [03:41] lol [03:41] reon: run livecd and unmount the partition to resize it... [03:41] even Firefox is freezing now [03:41] private_guy: its neither. i dont know the answer but I know you can answer your own question. [03:41] private_guy, there is no native mIRC for Linux [03:41] rm130: teehee [03:41] Are you talking to me rm130? [03:41] and rythmbox wont play my music [03:41] like it did before? === khermans__ [n=khermans@c-75-67-197-102.hsd1.ma.comcast.net] has joined #ubuntu [03:41] you can, however, run it using WINE === Tribes [n=Tribes@pD9E87AED.dip.t-dialin.net] has joined #ubuntu === Polis_ttt [n=Polis_tt@194-237-172-225-no48.business.telia.com] has joined #ubuntu [03:41] no === tlucas [n=tom@saintjohns.demon.co.uk] has left #ubuntu [] [03:41] someone have installed oracle on ubuntu linux? [03:41] Oh okay :D [03:41] I have javascript enabled [03:41] how do i tell the find command to exclude some files? [03:41] So guys, how do i connect via MIRC with Linux? [03:41] assume i am using -iname [03:42] Jack_Sparrow, renzo17, I know that and I'm trying from the livecd. === Cone [n=fans@60.213.45.175] has joined #ubuntu [03:42] yjwong, noapic doesn't solve the problem. I read that one has to install the standard i386 kernel, but doing that would probably be a PITA. I guess I'll just download a differen VMware image, e.g. the FreeBSD one (need sth. small, i.e. ca. 200MB, for doing some tests). [03:42] khermans__: man find [03:42] whatever I'll find another pastebin site === Cone [n=fans@60.213.45.175] has left #ubuntu [""] [03:42] private_guy: you can run it using Wine, but you might be better off using xchat or irssi. [03:42] Frogzoo, i did dude === lecchinoforever [n=deathora@131.114.10.34] has joined #ubuntu === TataraKutere_ [n=alimurat@85.97.42.114] has joined #ubuntu [03:42] Jack_Sparrow, renzo17, partitions are unmounted [03:42] reon: Note, if doing this changes the number of the Ub partition you will not be able to boot the install until you fix grub. sometimes better to leave a very samll partition where you removed windows [03:42] Oh okay [03:42] thanks guys [03:42] Frogzoo, man find /exclude returns nothing === nttd [n=blend@62-101-126-209.ip.fastwebnet.it] has joined #ubuntu [03:42] goodbye for now :D === CompJunki [n=smitch@cpc2-leic1-0-0-cust166.lei3.cable.ntl.com] has joined #ubuntu [03:42] now, just one question, it's important again [03:42] renzo17, here you go: http://pastebin.com/m127c80cc [03:42] feklee_, you could try. Personally, I've ever run into those kind of problems before. Good luck anyway :) === JackYang [n=chatzill@211.144.127.18] has left #ubuntu [] [03:43] Jack_Sparrow, no problem fixing grub here. what I cannot do is resize === DenysLins [n=denys@189.13.234.224] has joined #ubuntu === Vidman [i=MKPortal@82-43-207-101.cable.ubr04.uddi.blueyonder.co.uk] has joined #ubuntu === jpiccolo [n=sdfer@c-71-58-111-139.hsd1.pa.comcast.net] has joined #ubuntu [03:43] yjwong, Well, you probably have a better processor. :-) I'll probably try Ubuntu some other time. [03:43] hallo, i have some problems regarding fonts on console.. I use en_us keyboard keybindings but i read italian text and i get strange output, how do i fix it? [03:43] how would i get php5 sources? [03:43] do the xp viruses remains when an infected file is copied to a linux partition and then back to an ntfs partition? [03:43] yes [03:43] TataraKutere_: yep === gana-home [n=ganadist@121.88.56.85] has joined #ubuntu === asmarin [n=xxx@fiebre.eii.us.es] has joined #ubuntu [03:44] hi [03:44] SlimeyPete: is there any solution for that? [03:44] genii: is there any solution for that? [03:44] TataraKutere_: run a virus scanner. Other than that, no. [03:44] :) [03:44] i have an old server with hoary and need to install packages from net, any knows an active mirror? [03:44] virus scan in xp [03:44] i cant upgrade it [03:44] its on production [03:44] jpiccolo, from the PHP site? === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu [03:44] TataraKutere_: Yes, you need to remove the virus natively from XP with a virus scanner/removal tool etc [03:44] i thought there might be a way in apt-get [03:44] or do you want the one that is source compiled for Ubuntu? === darrh00 [n=darren@218.18.247.98] has joined #ubuntu === sexcopter [n=james@sr-223.srsa01.resnet.ubc.ca] has joined #ubuntu [03:45] genii: ...or from Linux using clamav or AVG... [03:45] khermans__: -false I'm thinking [03:45] jpiccolo: php5-dev package maybe? [03:45] i had a comodo antivirus program, anybody has a better suggestion for an application to use on xp or virus defecting? === Trevi [n=Trevi@79.12.129.189] has joined #ubuntu === ustunozgur [n=ustunozg@88.245.240.54] has joined #ubuntu [03:45] SlimeyPete: AVG might do it if it uses the same definition file as the windoze version === jeff_ [n=jdlouhy@155.33.121.89] has joined #ubuntu [03:45] ubuntu rules [03:45] lol [03:45] hm, whenever something requires my user password (like synaptic and co), the password dialog pops up. The rest of the desktop is "faded to black" a little bit. This fade is really really slow/choppy, any idea why that happens? [03:45] jpiccolo, I'm not sure of the right way to do it, but I remember the command is apt-src [03:45] everyone i recommend it [03:45] now [03:45] lol [03:45] khermans__: also ! [03:45] TataraKutere_: AVG's pretty good, for a free program. [03:45] linux is boss [03:46] Karotte: not well implemented, maybe (I see it also) [03:46] TataraKutere_: AVG antivirus, or AnitVir are top2 free ones [03:46] Karotte: it is on most systems... I don't like it either [03:46] *AntiVir [03:46] bleh typos [03:46] lol === darrh00 [n=darren@218.18.247.98] has left #ubuntu [] [03:46] Karotte, those effects aren't composited, i guess [03:46] alrite [03:46] hallo, i have some problems regarding fonts on console.. I use en_us keyboard keybindings but i read italian text and i get strange output, how do i fix it? [03:46] okay ;) [03:46] you don't really need virus software on yout uboe system === hwang [n=hwang@58.240.249.155] has joined #ubuntu [03:47] genii, SlimeyPete: so you say there is no antivirus scanner program in linux which could also scan xp files...? am i right? === Lukul [n=ln@igemyvuci.hlm.sgsnet.se] has joined #ubuntu [03:47] nickrud, Vlet, yjwong: if you all see the same problem, I'll embrace it for the moment and no longer think about it ;) [03:47] rm130: your xorg.conf looks fine..........i think your using the best driver for the job but i dont know why 3d doesnt work [03:47] ok where would the sources for php5 be === leonel [n=leonel@189.155.157.108] has joined #ubuntu [03:47] === gilos [n=brad@kccsfw01.sec.sprint.net] has left #ubuntu [] [03:47] Anyone else got any ideas on how to resize my ubuntu partition ? === ura [n=ura@151.36.177.178] has joined #ubuntu [03:47] genii, SlimeyPete: so you say there is no antivirus scanner program in linux which could also scan xp files...? am i right? [03:47] hwang: is chiness [03:47] reon: use gpedit [03:48] reon: did you tried gparted? [03:48] Karotte: Just one of those things that we just need to bear with for the moment... give it time :) [03:48] reon:i mean gparted === krammer [n=krammer@c-66-177-57-246.hsd1.fl.comcast.net] has joined #ubuntu [03:48] Vlet: no problem [03:48] genii, SlimeyPete: so you say there is no antivirus scanner program in linux which could also scan xp files...? am i right? [03:48] reon: yes === pyrite [n=users1@102.62.4.210.in-addr.arpa.cable21.net] has joined #ubuntu [03:48] hmm === leonel [n=leonel@189.155.157.108] has left #ubuntu ["Ex-Chat"] [03:48] I cannot open the network settings Help please [03:48] TataraKutere_, I thought there is ClamAV, AVG Free for Linux, etc.? [03:48] hallo, i have some problems regarding fonts on console.. I use en_us keyboard keybindings but i read italian text and i get strange output, how do i fix it? -- is may something with console-data or locales? [03:49] Can i work for you [03:49] mayb* [03:49] lol === DuperMan [n=taco@89.1.232.28.dynamic.barak-online.net] has joined #ubuntu [03:49] jcaspe, I'm trying to use gparted from the livedcd. I deleted my first windows partition, I unmounted all the volumes. gparted does not give me the option to resize using the preceding space. [03:49] yjwong, sorry, i couldn't understand what you said? [03:49] Vlet: same thing with my I810 display driver and beryl blur effects.. From message board threats it seems that it's just not working with the driver version present in Feisty (did work with Eft). I'm hoping for 7.10 :) [03:49] anyone know where source code is on edgy [03:49] threads! === WaxyFresh [n=r00t@199-2-59-123.dsl.dynamic.uninets.net] has joined #ubuntu [03:49] everyone should be coding for linux [03:49] TataraKutere_: not meaning to interrupt here.. but I think clamav scan for windows viruses.. afaik [03:49] not threats. Please don't guantanamo me ;) [03:49] not a winblows system === sparklehistory [i=sparkleh@140.225.144.236] has joined #ubuntu === Geek_ [n=Geek@cm209.delta20.maxonline.com.sg] has joined #ubuntu [03:49] fat32 caP [03:49] lol [03:50] its fucking shit === Cone [n=fans@60.213.45.175] has joined #ubuntu [03:50] exists any mirror repository for hoary? [03:50] sup cone [03:50] no, it's okay, i'm looking for advices Slart, i also heard that clamav does so.. [03:50] !ohmy | CompJunki [03:50] renzo17, I think it is the openchrome driver that I need [03:50] CompJunki: Please watch your language and keep this channel family friendly. === tlucas [n=tom@saintjohns.demon.co.uk] has joined #ubuntu [03:50] reon: what do want to do in your hard drive anyway? [03:50] but there is no .deb for it and I can't get it via terminal [03:50] I cannot open the network settings Help please [03:50] lol === mamounic [n=mamounic@87-194-105-30.bethere.co.uk] has joined #ubuntu [03:50] now i got attention === lukas2 [n=lukas@dslb-084-061-061-051.pools.arcor-ip.net] has joined #ubuntu [03:51] hallo, i have some problems regarding fonts on console.. I use en_us keyboard keybindings but i read italian text and i get strange output, how do i fix it? -- is maybe something with console-data or locales? === madmetal_spyros [n=madmetal@ppp118-188.dsl.hol.gr] has joined #ubuntu [03:51] rm130: add the following line you your xorg.conf in your section devices part ---- Option "VBEModes" "true" ---- [03:51] Karotte: oh yeah, I have a laptop with i810 on it... bery works.. but not great. Even at home with my beefy nvidia, the password prompt fade thign looks crappy [03:51] rm130: restart X and see if that works === madmetal_spyros [n=madmetal@ppp118-188.dsl.hol.gr] has left #ubuntu ["Leaving"] [03:51] what a nice family channel fucking jesus sir [03:51] jcaspe, I deleted Windows, wich was on the very first partition, it is now unallocated space. I want to resize Ubuntu to take up this unallocated space. === sam1338 [n=sam@host86-140-230-8.range86-140.btcentralplus.com] has joined #ubuntu === Cone [n=fans@60.213.45.175] has left #ubuntu [""] [03:51] hello there When I try to start ntop with specific folder for data saving (Like this: ntop -P /var/lib/ntop")there is somekind of an error: http://paste.ubuntu-nl.org/36432/ [03:51] CompJunki: stop that please [03:51] CompJunki: Language [03:51] [03:52] lol [03:52] #waht? === Budwaa [n=tom@davidbarker333.plus.com] has joined #ubuntu [03:52] I cannot belive it's so hard to do something as simple as resizing a partition. [03:52] jpiccolo: sudo apt-get source php5 [03:52] no one wants to talk to me [03:52] so why cant i say what i say > === xeer [n=xeer@71.80.149.7] has joined #ubuntu [03:52] hey babies...:) === sam1338 [n=sam@host86-140-230-8.range86-140.btcentralplus.com] has left #ubuntu [] === gvsa123 [n=girard@125.60.241.233] has joined #ubuntu [03:52] hi TataraKutere_ [03:52] CompJunki, cause everything isn't polite.. [03:52] i found fprot, they say it scans xp drives from linux..:) === gilos [n=brad@kccsfw01.sec.sprint.net] has joined #ubuntu === bruenig [n=bruenig@ip-129-15-131-246.fescfwsm.ou.edu] has joined #ubuntu === Kitar|st [i=Kitarist@BSN-77-235-192.dial-up.dsl.siol.net] has joined #Ubuntu [03:53] ill get from archive.org [03:53] frojnd: i know :/ because i said ubuntu rocks ? === boyam [n=boyam@208.104.11.156] has joined #ubuntu [03:53] asmarin: there might be something a old-releases.ubuntu.com [03:53] nickrud: thanks === tlucas [n=tom@saintjohns.demon.co.uk] has left #ubuntu [] [03:53] renzo17, so it should be: Section "Device" [03:53] Identifier "Generic Video Card" [03:53] Driver "via" [03:53] BusID "PCI:1:0:0" [03:53] Option "VBEModes" "true" [03:53] CompJunki, don't know what u said but bad words aren't really polite.. === ura is now known as eguzkia [03:54] yes [03:54] thanks a lot for information [03:54] nickrud [03:54] frojnd: sike [03:54] :-D [03:54] rm130: use the pastebin for large posts [03:54] renzo17, ? [03:54] asmarin: note - there are no more security updates for hoary [03:54] anyeay: when I try to start ntop with specific folder for data saving (Like this: ntop -P /var/lib/ntop")there is somekind of an error: http://paste.ubuntu-nl.org/36432/ [03:54] I cannot open the network settings Help please [03:54] rm130: thats the one..........if it doesnt work and you need to remove the line then go to a tty and remove it [03:54] I've already given root a password, how do I allow root to login to the gui? I'm having problems with mysql as non root and want to run an app from the gui as root. [03:54] krammer, what is the specific problem you are having? [03:54] ok === sandesh [n=sandesh@122.167.58.32] has joined #ubuntu === ugarit [n=chatzill@pool-72-73-216-71.cmdnnj.fios.verizon.net] has joined #ubuntu [03:55] so just restart and see if it works? === nbkr [n=nbkr@p54AA2445.dip0.t-ipconnect.de] has joined #ubuntu [03:55] like 3D? === Moniker42 [n=sean@87-194-119-253.bethere.co.uk] has joined #ubuntu === kion [n=kion@87-194-105-30.bethere.co.uk] has joined #ubuntu [03:55] i hv downloaded java run time evironment .bin file.. how to install it === MTecknology [n=MTecknol@138.247.249.53] has joined #ubuntu [03:55] first i cannot connect to the router then i tried with a ether cable directly to the router no luck now next day cannot open netwrksetttings === Geek_ is now known as faileas [03:55] nickrud: i know i know but is on production and i cant to upgrade it === Paddy_EIRE [n=patrick@84.13.126.88] has joined #ubuntu [03:55] sandesh, Make the file executable and run it from the console. [03:55] sandesh: don't, use the package from ubuntu [03:55] sandesh, open a Terminal window, cd to the directory, then "sh " (without the quotes) [03:55] !java | sandesh [03:56] renzo17, it wont let me save [03:56] sandesh: is there a reason you didnt want to use repos? [03:56] sandesh: To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository. Enable the backports repository on Edgy to install sun-java6-jre [03:56] I hate to reinstall [03:56] hey, i put in a new graphics card there and it worked fine. then i rebooted and now i don't have a GUI =( [03:56] rm130: you know how to do that? if you get a black screen hit Ctrl+Alt+F1 then login and run "sudo nano /etc/X11/xorg.conf" to edit your xorg.conf from a terminal. [03:56] how to increase partition in ubuntu? === incorrect [n=incorrec@host81-138-107-161.in-addr.btopenworld.com] has joined #ubuntu [03:56] Moniker42, What's the error message? [03:56] what do people use these days for web site reports? [03:56] rm130: open the xorg.conf with sudo....as in "gksudo gedit /etc/X11/xorg.conf" then change and save it === sprash [n=sprash@e176248222.adsl.alicedsl.de] has joined #ubuntu [03:56] incorrect, awstats ? [03:56] nickrud: is there a way to get hotmail in evolution? === kitche [n=dragon@pool-141-149-155-123.buff.east.verizon.net] has joined #ubuntu [03:56] gilos: do gksu , boom, you're root === brian_ [n=brian@125.164.202.155] has joined #ubuntu [03:57] jcaspe, as in, increase the size of partitions or add a new partition? === Amaranth_ [n=travis@ubuntu/member/Amaranth] has joined #ubuntu [03:57] nbkr, i wondered if there was something new as it hasn't been updated since 205 [03:57] err 2005 [03:57] increase the size of ubuntu partition === Egoist [n=Michael@85.249.145.2] has joined #ubuntu === _3v1n0_ [n=Trevi@host7-120-dynamic.12-79-r.retail.telecomitalia.it] has joined #ubuntu [03:57] gksudo gedit /etc/X11/xorg.conf === codi [n=abrar@61.17.193.222] has left #ubuntu [] [03:57] doesn't do anything in terminal [03:58] keito: never tried it, but hotmail evolution has a lot of hits on google. Not the advice I'd want to give, but the top one is an ubuntu forum post ;) [03:58] ... ? :) [03:58] nickrud: so if it's a webrowser based install will it work? I'm trying to configure mediawiki and it's erroring out on the mysql db [03:58] rm130: try sudo nano /etc/X11/xorg.conf === ta_bu_shi_da_yu [n=chris@c210-49-15-96.blktn4.nsw.optusnet.com.au] has joined #ubuntu === Egoist [n=Michael@85.249.145.2] has left #ubuntu [] [03:58] incorrect, awstats last release (6.7) is from 2007-07-03 . [03:58] nickrud: just looking cheers bro === telematica [n=telemati@200.14.84.158] has joined #ubuntu [03:58] hallo, i have some problems regarding fonts on console.. I use en_us keyboard keybindings but i read italian text and i get strange output, how do i fix it? -- is maybe something with console-data or locales? === stefg [n=stefg@e179145199.adsl.alicedsl.de] has joined #ubuntu [03:58] gilos: install mysql-admin and run it as yourself ; use the mysql root password to log into mysql === simianspaceman [n=simian@ip72-192-33-185.ri.ri.cox.net] has left #ubuntu [] [03:59] jcaspe, if you are referring to the root partition, then you have to boot from some other OS (i.e. Ubuntu Live CD and use the GNOME Partition Editor) [03:59] works [03:59] Also, you can refer here: http://www.linuxquestions.org/questions/showthread.php?t=363639 [03:59] and just add: Option "VBEModes" "true"? [03:59] under section devices? [03:59] yep === MartinW [n=MartinW@vc-196-207-45-246.3g.vodacom.co.za] has joined #ubuntu [03:59] k thanks === cwho [n=cwho@203-59-50-6.dyn.iinet.net.au] has joined #ubuntu [03:59] as you did before [03:59] Karotte: http://ubuntuforums.org/archive/index.php/t-435755.html [03:59] how do I save it? [03:59] i need help installing ffmpeg-php [03:59] rm130: i edited your paste bin, look at the highlighted line http://pastebin.com/m2d96e9 [03:59] Karotte: Press Alt-F2 and type "gconf-editor". Expand the "apps" list, and then select "gksu". Check the "disable-grab" item. [03:59] gilos: note: the mysql password and ubuntu password are two different animals (excuse me if I'm belaboring the obvious) [04:00] yjwong: does it support increasing of partition size? [04:00] yeah === Uraeus [n=cschalle@88-97-242-46.dsl.zen.co.uk] has joined #ubuntu === ustunozgur [n=ustunozg@88.245.240.54] has left #ubuntu [] [04:01] I'm still trying to figure out how to write cobol in linux... my instructor probably has an IDE for windows.... but if that's the case I don't want to be running it under wine - The code isn't what I need to figure out the best way to write/run the code [04:01] jcaspe, it should be able to. I've also found a thread that is quite relevant to your question :) http://ubuntuforums.org/showthread.php?t=506437&highlight=resize2fs [04:01] got a question regarding apt-get : I tried installing vmware-player, it failed (something about the vmnet failing). So I tried to uninstall it, and that failed too (same reason). Now stuck with vmware-player trying to uninstall each time I use apt-get... [04:01] any ideas? === Cone [n=fans@60.213.45.175] has joined #ubuntu === Cone [n=fans@60.213.45.175] has left #ubuntu [""] [04:02] MTecknology, there is open-cobol. A cobol compiler. [04:02] cwho: Paste the actual errors here: http://paste.ubuntu-nl.org/ === mikl [n=mikl@pdpc/supporter/active/mikl] has joined #ubuntu === RaD|Tz [n=ubuntu70@189.168.46.230] has joined #ubuntu [04:02] <_Sick> isn't it possible to define following line in vhost.conf ? "ServerAlias myName.v2124.strato.de" ? === MartinW [n=MartinW@vc-196-207-45-246.3g.vodacom.co.za] has left #ubuntu [] [04:02] god damn it === Trevinyo [n=Trevi@host76-8-dynamic.9-79-r.retail.telecomitalia.it] has joined #ubuntu === radhios [n=radhios@200.47.67.169] has joined #ubuntu [04:02] _Sick, it should be. [04:02] !omg [04:02] Sorry, I don't know anything about omg - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi === skyfalcon866 [n=jack@c-24-218-246-100.hsd1.ma.comcast.net] has joined #ubuntu [04:03] tnx yjwong! [04:03] !language [04:03] Please watch your language and keep this channel family friendly. [04:03] Vlet: thanks === macsim [n=macsim@LSt-Amand-152-32-31-103.w82-127.abo.wanadoo.fr] has joined #ubuntu === usser [n=dmitry@ool-18b8e9e6.dyn.optonline.net] has joined #ubuntu [04:03] what should i do with a second hard disk [04:03] Frogzoo: had a guy from our ISP over and confirmed all the settings are absolutly fine, he couldn't work out whats wrong [04:03] nbkr, So write it in vim or something then does open-cobol work like gcc ? [04:03] pasted in pastebin [04:03] Frogzoo: decided it's either a bug with linux or it's corrupt somehow [04:03] cwho: paste the link to your pasted item :) [04:03] cwho: sudo dpkg -r --force-remove-reinstreq vmware-player [04:03] jcaspe, no problem :) === kritzstapf [n=kritzsta@pD955B026.dip0.t-ipconnect.de] has joined #ubuntu [04:04] :-D [04:04] nickrud: okay, thanks, installing mysql admin now. === asmith42a [n=adams@p248n30.ruraltel.net] has joined #ubuntu === Lurkan [n=Lurkan@189.142.230.143] has joined #ubuntu === modor [n=administ@67.11.23.115] has joined #ubuntu [04:04] MTecknology, I'm not used to cobol, but yes, I think so. Write the code in vim and run the cobol compiler. [04:04] sorry :$ http://paste.ubuntu-nl.org/36435/ === l0ki [n=l0ki@dslb-084-058-179-133.pools.arcor-ip.net] has joined #ubuntu === winbond [n=winbond@c-68-46-102-149.hsd1.pa.comcast.net] has joined #ubuntu === Babble [n=wardc@cpe-24-161-205-69.bak.res.rr.com] has joined #ubuntu [04:04] ah thanks nickrud [04:04] Is there a way to scan for new hardware? === piti [n=pablo@mut38-1-82-67-65-78.fbx.proxad.net] has joined #ubuntu [04:04] Frosty|IDle: grrr... it works on 2 boxes - very odd it won't work on the ubuntu box [04:04] cwho: See nickrud's message :) === eguzkia is now known as askatasuna === n0cturnal_ [n=n0c@cl1-203-82-208-197.45ru.net.au] has joined #ubuntu [04:04] good morning [04:04] Frosty|IDle: plus it was working.. [04:04] asmith42a, What do you mean with "scan" ? === jmanuel_cool [n=jmanuel@200-71-186-240.genericrev.telcel.net.ve] has joined #ubuntu [04:04] Vlet: sorry for shortstopping you like that === reon [n=reon@dsl-244-165-223.telkomadsl.co.za] has left #ubuntu ["Konversation] === piti [n=pablo@mut38-1-82-67-65-78.fbx.proxad.net] has left #ubuntu ["Kopete] [04:05] asmith42a, USB Devices? PCI? [04:05] thanks Vlet too. thanks again nickrud :) === dmitry_ [n=dmitry@ool-18b8e9e6.dyn.optonline.net] has joined #ubuntu [04:05] am a new linux user, using feisty [04:05] Frosty|IDle: you might try running wireshark, you might catch something odd === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu === kritzstapf is now known as kritz_ [04:05] !hi | modor [04:05] modor: Hi! Welcome to #ubuntu! [04:06] hello everubody === kritzstapf [i=kritzsta@cpegel.de] has joined #ubuntu [04:06] hey [04:06] was wondering if anyone knows how to adjust dvd-rw speed beyond software's 6x === jomino [n=jomi@p5B1327AF.dip0.t-ipconnect.de] has joined #ubuntu === RaD|Tz [n=ubuntu70@189.168.46.230] has left #ubuntu ["http://SoloBSD.org"] === zyth_ [n=zyth@wnpgmb06dc1-0-52.dynamic.mts.net] has joined #Ubuntu === antoine [n=antoine@APlessis-Bouchard-101-1-1-186.w193-252.abo.wanadoo.fr] has joined #ubuntu === defjux21 [i=esoteric@c-24-61-58-233.hsd1.ma.comcast.net] has joined #ubuntu === zyth_ is now known as zyth === dalero [n=omar@adsl196-211-92-206-196.adsl196-3.iam.net.ma] has joined #ubuntu === antoine [n=antoine@APlessis-Bouchard-101-1-1-186.w193-252.abo.wanadoo.fr] has left #ubuntu ["Ex-Chat"] [04:07] have a 20x writer, 16x media, but tovid only allows 6x write === Mastastealth [n=mastaste@Wimax-Bqlla-190-70-220-180.orbitel.net.co] has joined #ubuntu === mehdi [n=mehdi@41.225.245.132] has joined #ubuntu [04:07] er tried: sudo dpkg -r --force-remove-reinstreq vmware-player but got this error: http://paste.ubuntu-nl.org/36437/ ... I dont want to get vmware-player working anymore - just wish to remove it... [04:07] or cd/dvd creator only allows 6x write === jstarcher [n=jstarche@cpe-66-61-40-229.neo.res.rr.com] has joined #ubuntu [04:08] TataraKutere_: Sorry for lag, was working. You can try using AVG from inside linux to scan and clean XP files. [04:08] when I try to mount this audio CD it says wrong fs type, what do I have to do? [04:08] hey guys, I just updated this morning some stuff on the kernel, but now it seems I lost my GFX rendering. Looks like the restricted module is lagging behind a version or something, is that normal and when will the new one be out? [04:08] jstarcher, Why do you want to mount an Audio CD? [04:08] nbkr, thought you had to? lol === skunkworks [n=skunkwor@68-115-41-210.static.eucl.wi.charter.com] has joined #ubuntu [04:09] jstarcher: audio cds don't have a file system & won't mount === Toma- [n=e17@203-59-151-120.dyn.iinet.net.au] has joined #ubuntu === wyggler2 [n=wyggler2@user-0ce2jt0.cable.mindspring.com] has joined #ubuntu [04:09] jstarcher, Not for listening to it. [04:09] Frogzoo, that makes sense then haha === neuratix [n=lorents@static149-194.adsl.no] has joined #ubuntu [04:09] Mastastealth: yeah, it's normal. I expect the new one will be out when Gutsy is release (in October, supposedly) [04:09] well I'm trying to convert the files to mp3, any suggestions? === tristan_ [n=trisan@mail.touchtunes.com] has joined #ubuntu [04:09] jstarcher, ripperX [04:09] jstarcher: just rip it - eg. juicer [04:10] uh, so I can't have hardware acceleration till October? :P [04:10] sound juicer is what I use [04:10] jstarcher, But infact - why not rip it to ogg? [04:10] jstarcher, Applications -> Sound & Video -> Sound Juicer [04:10] When connected pppd, DHCP refresh on eth0 makes /etc/resolv.conf default again when should stay /etc/ppp/resolv.conf until modem disconnects. any ideas? Don't want to do something like ifconfig eth0 down before dialling, also shouldn't need to. [04:10] is there a way to downgrade my kernel then? [04:10] any reason Feistry would limit writer to 1/3 hardware's design? [04:10] DenysLins: HI [04:10] nbkr, well it's going on a website which uses a flash mp3 player [04:10] oops === tlucas [n=tom@saintjohns.demon.co.uk] has joined #ubuntu [04:10] modor, no - it shouldn't do that. [04:10] feisty, i meant [04:10] could i upgrade my kernel? [04:10] modor: Will k3b write a data dvd faster than 6x [04:10] Mastastealth, you don't have to downgrade the kernel === g0ju [n=moo@dslb-088-072-167-193.pools.arcor-ip.net] has joined #ubuntu [04:11] sparrow, i haven't tried that one, just tovid and cd/dvd creator [04:11] you could re-compile the kernel module for your driver [04:11] modor: it can but it all depends on your dvd drive and the dvd [04:11] modor well u can guess that it didnt detect your dvd-rw properly so it set it to most common settings that work for any dvd-rw [04:11] both limit writing disc to 6x === CHAOS6 [n=idan@89.1.229.147.dynamic.barak-online.net] has joined #ubuntu [04:11] yjwong, and how would I go about doing that? === tlucas [n=tom@saintjohns.demon.co.uk] has left #ubuntu [] [04:12] genii: ummm, why are you refreshing your ip? === Trevi [n=Trevi@host235-9-dynamic.9-79-r.retail.telecomitalia.it] has joined #ubuntu [04:12] depending on your graphics card, Mastastealth [04:12] Frogzoo: Dhclient is automatically doing this. [04:12] i see, any suggestion to changing these settings? [04:12] also, can someone check what version of the restricted-modules they have? I'm at 2.6.20.5-16.29... [04:12] yjwong: I use an Nvidia. === Mike [n=lesley@125-24-162-10.adsl.totbb.net] has joined #ubuntu === grlubb [i=grlubb@c-75-67-72-224.hsd1.ma.comcast.net] has joined #ubuntu === KevinOman [n=kevin@66-227-221-83.dhcp.klmz.mi.charter.com] has joined #ubuntu [04:13] Mastastealth: why not install the driver from nvidia site? === fender__ [n=fender@mail.dropletsap.com] has joined #ubuntu [04:13] Mastastealth, you have installed the nvidia drivers through restricted-manager, then the drivers should still work [04:13] otherwise, you need to grab the installer from the nvidia site === PP188 [n=pedro@201-95-150-203.dsl.telesp.net.br] has joined #ubuntu [04:14] and re-run the install like you did when installing the first time === Chinaski1 [n=Druganti@host241-181-dynamic.6-87-r.retail.telecomitalia.it] has joined #ubuntu [04:14] Hi, I'm using Ubuntu 7.04. The problem is that Java font is too big(I think it's 17-22), is there a way to make it smaller? [04:14] i hope that helps :P [04:14] ugh. I don't get what the problem is though. All the restricted-modules thing has to do is keep in sync with the kernel right? I don't have to go install or recompile from other sources when it can work with some simple apt-get management...:( [04:14] Sorry about that. I got a phone call right after I asked. [04:14] genii: you're running ppp & dhcp on the same interface ?? [04:14] modor: K3B does not limit it to 6x.. I just checked === a[2121] e [n=a2121e@18.97.95.219.trm01-home.tm.net.my] has joined #ubuntu === PPG [n=admin@77.73.187.210] has joined #ubuntu === gotiniens [n=gotinien@cc68413-a.ensch1.ov.home.nl] has joined #ubuntu [04:14] skyfalcon, dmitry, is their a way to tweak settings to allow faster write for dvdrw? [04:15] Re: "scan" for hardware. I want to setup a new monitor. I connected it, but I don't see any new display modes listed. === frando_ [n=frando@drupal.org/user/21850/view] has joined #ubuntu === onats [n=julian@122.53.135.14] has joined #ubuntu === ptn107 [n=phil@m115f36d0.tmodns.net] has joined #ubuntu [04:15] uhey [04:15] is there a gui for the aticonfig? [04:15] Frogzoo: ppp connection is a modem, which is being used to connect to internet. eth0 is on the LAN and autoassigned by dhcp. Every time dhclient auto refreshes the LAN ip it's resolv.conf now takes precedence over the /etc/ppp/resolv.conf which is being used for the internet connection, making DNS useless again. === admean [i=armin@kuba.osn.de] has joined #ubuntu === askatasuna [n=ura@151.36.177.178] has left #ubuntu ["Sto] [04:15] problem is, each new kernel upgrade will create a new directory in /lib/, and a new kernel will read from the new directory [04:15] does somebody has any experience with cisco clean access manager? === mendred [n=mendred@59.93.50.190] has joined #ubuntu [04:15] My thinking was that I needed to tell the system that there was a new monitor by scanning for it. [04:16] Mastastealth, you can copy the old kernel module from the old directory to the new one, but i'm not sure whether that will work properly [04:16] I also have a stupid question for the forum === dmitry_ is now known as usser_ [04:16] gotiniens, i think cisco clean access checks if you have the proper software installed, before it lets you access the network [04:16] modor: Do you have the same limit with dvd-r that you do with rw [04:16] gotiniens, there's #cisco too [04:16] yes [04:16] genii: you can remove domain-name-servers from dhclient.conf [04:16] asmith42a, tried to reconfigure X via dpkg-reconfigure? === admean [i=armin@kuba.osn.de] has left #ubuntu [] [04:16] anyone know of a gui front-end for aticonfig? [04:16] No, but that sounds like the info I was looking for, thank you. [04:17] yjwong: but its not a whole new kernel, its just a little update. from 2.6.20-16.28 to 16-31 or something...oh well. is it better to just wait, or should I just grab the Envy script? [04:17] onats, I know what it does, the problem is to connect to an clean access manger secured network === carolina [n=carolina@201.63.212.81] has joined #ubuntu [04:17] Frogzoo: Thanks i'll try that. [04:17] modor: k3b can do 16x and more... dvd-r [04:17] onats theres ati-control panel === RaD|Tz [n=ubuntu70@189.168.46.230] has joined #ubuntu === carolina [n=carolina@201.63.212.81] has left #ubuntu ["Ex-Chat"] === balthamaisteri [n=balthama@statip-80-95-136-74.kopteri.net] has joined #ubuntu [04:17] Anyone here familiar with getting wifi to work on a laptop that has a stupid software switch for the wlan adaptor? I got a packardbell easynote r1100 here, and according to http://ubuntuforums.org/showthread.php?t=255574 wifi should work with the rfswitch module. I got it to compile, and the module seems to be loaded successfully, but it still doesn't work. [04:17] onats comes with the driver [04:17] asmith42a: gksu gedit /etc/X11/xorg.conf youll see a vert and horiz setting your monitor manual should tell you these and then the default depth at the bottom usualy youll have 24 selected just add resolutions there highest to lowest - or just use the dpkg-reconfigure [04:17] jack sparrow, i am using dvd-r, dvd+r, 16x media [04:17] how can I convert a mpeg video into a flash video for a website? [04:17] usser, hmmm seems its not installed along with the driver? === RaD|Tz [n=ubuntu70@189.168.46.230] has left #ubuntu ["http://SoloBSD.org"] [04:18] onats yea well it comes with the driver but u have to install it separately [04:18] dyrne: No way to avoid doing it manually? The OS installed without me having to tell it all that. [04:18] Mastastealth, I think it is better to wait, I've heard of some problems caused by Envy. If you have an ATI card, then I would probably have known the steps for re-compiling the kernel module. === KennethP_ [n=kpo@80.167.165.222] has joined #ubuntu [04:18] jack sparrow, I will try that, hopefully with a different result [04:18] er tried: sudo dpkg -r --force-remove-reinstreq vmware-player but got this error: http://paste.ubuntu-nl.org/36437/ ... I dont want to get vmware-player working anymore - just wish to remove it... [04:18] onats and it doesnt provide all the functionality of aticonfig [04:18] dyrne: Oh, nevermind. [04:18] modor: JUst to verify you have checked data dvd options and not just dvd image options... === Erythro is now known as erythro [04:18] usser, where are the files to install it? [04:18] Frogzoo: Whats interesting is ppp options file has replacedefaultroute which stays active. So DNS reverts to stock /etc/resolv.conf while the gateway sticks to ppp interface [04:18] can someone help me remove vmware-player? :) === mrigns [n=mrigns@unaffiliated/mrigns] has joined #ubuntu [04:18] yjwong: All right. Thanks. Guess I'll have to live without Compiz for a bit. ;) === Ahadiel [n=ahadiel@S010600131042857c.vc.shawcable.net] has joined #ubuntu [04:19] jack sparrow, where do I check this? [04:19] No problem, Mastastealth :) [04:19] cwho, try: sudo apt-get remove vmware-player [04:20] modor: try to burn data dvd-r and you can get to the burn dialog where speed says auto and try to change it.. you do not need to burn a disc to check [04:20] cwho: how'd you install? from the repos? [04:20] When trying to activate it with ifup, the device is not found, and /var/log/messages reports [11009.306820] pbe5: failed at request_region() and [11009.306828] pbe5: Radio turned ON [04:20] yeah I did apt-get install vmware-player [04:20] cwho: sudo dpkg --purge vmware-player [04:21] it failed to start up the NAT service on vmnet8. So I try removing it, but it fails to stop the virtual ethernet service [04:21] onats it depends on how u install the actual driver, its in the repos [04:21] jack sparrow, in tovid and cd/dvd creator, the highest manual selection for the /dev/dvdrw was 6.2x === FrancoGG_ [n=Franco@wikimedia/FrancoGG] has joined #ubuntu [04:21] cwho: sudo /etc/init.d/vmware stop ? [04:21] modor: I can understand burnong a movie image being restricted in speed... lots of stuff going on in the background building it... [04:21] how do you get your ipconfog up on terminal ? [04:21] config === zarul [n=zarulsha@ubuntu/member/zarul] has joined #ubuntu [04:21] modor: I asked specifically for k3b info [04:21] CompJunki: ifconfig [04:21] jack sparrow, i agree for dvd movies [04:21] thanks === scofield [n=juan@44-111-231-201.fibertel.com.ar] has joined #ubuntu [04:22] if ? [04:22] why f [04:22] why not p [04:22] ? [04:22] jack sparrow, sorry, i have't installed that application yet. I must get it === hechu [n=hechu@61.140.122.155] has joined #ubuntu [04:22] onats hang on i'll check the actual name of the package [04:22] Hi, I'm using Ubuntu 7.04. The problem is that Java appelt font in firefox is too big(I think it's 17-22), is there a way to make it smaller? I tried installing sun-java-fonts6, but it didn't do anything [04:22] !enter | CompJunki [04:22] CompJunki: Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation! === Sir_Brizz [n=brizz@c-71-199-40-168.hsd1.co.comcast.net] has joined #ubuntu [04:22] are there any other solutions how I can possibly activate the wlan adaptor apart from rfswitch, or how I can get rfswitch to work? [04:22] purge didnt work either. no /etc/init.d/vmware "command not found" === KennethP__ [n=kpo@80.167.165.222] has joined #ubuntu === someothernick [n=someothe@pool-72-85-194-108.bstnma.east.verizon.net] has joined #ubuntu === never|mobi [n=neversfe@mue-88-130-92-047.dsl.tropolys.de] has joined #ubuntu [04:22] usser, fglrx-control? [04:22] i like it === frando_ [n=frando@drupal.org/user/21850/view] has joined #ubuntu [04:22] lol === carolina [n=carolina@201.63.212.81] has joined #ubuntu [04:22] onats yea thats the one [04:23] CompJunki, I guess because it is InterFaces Configuration, not Internet Protocol Configuration === rio__ [n=rio@200.106.201.55] has joined #ubuntu [04:23] hola a todos [04:23] yjwong: its more detailed too [04:23] :D === natsumey_ [n=natsumey@235.253.48.60.klj03-home.tm.net.my] has joined #ubuntu [04:24] usser, where'd you find ati-control? i can't seem to run it === katho80 [n=thomas@T92da.t.pppool.de] has joined #ubuntu === xukun [n=xukun_@xm0027.uvt.nl] has joined #ubuntu === aguitel [n=aguitel@118-87-235-201.fibertel.com.ar] has joined #ubuntu [04:24] onats, what are you finding? Looking for aticonfig? [04:24] could i create a user and log it on without being off the GUI ? [04:24] what do I need to burn .nrg file? === pito [n=kiosk@125.164.202.43] has joined #ubuntu [04:24] and make it into a server login [04:24] onats its fglrx-control this was the thing i was talking about === haka4 [n=haka4@222.124.227.56] has joined #ubuntu [04:25] anyone have MicroSempron 3200 ? === lImItaO [n=Adrian@212.145.180.165] has joined #ubuntu === euriber [n=antisyst@62.43.34.227.dyn.user.ono.com] has joined #ubuntu [04:25] jack sparrow, thanks for the assistance, will return with k3b result === gotiniens [n=gotinien@cc68413-a.ensch1.ov.home.nl] has left #ubuntu ["Leaving"] === backpro [n=backpro@bzq-79-180-17-102.red.bezeqint.net] has joined #ubuntu [04:25] xukun: that is a nero file right [04:25] hello [04:25] yjwong, i'm looking for a front-end gui for aticonfig.. is there one? [04:25] Hello, how can I register my nick within Gaim? I'm new on IRC === psyone [n=simon@p508C51EC.dip.t-dialin.net] has joined #ubuntu === pito [n=kiosk@125.164.202.43] has joined #ubuntu === dalero [n=omar@adsl196-211-92-206-196.adsl196-3.iam.net.ma] has left #ubuntu [] [04:25] tengo ubuntu feisty, instale unos paquetes y depronto comenzo a borrarme otros que ya tenia, ahora cuando reinicio el sistema no me arranca en modo grafico , alguno sabe como reinstalar todos los paquetes necesarios pero sin borrar mis archivos en el disco duro? [04:25] Jack_Sparrow, can burn that in ubuntu? [04:25] onats, if you have installed via ATI's proprietary drivers, the command is "amdccle" [04:25] without the quotes, of course === khatahn [n=khatahn@MDCXC.voas.saunalahti.fi] has joined #ubuntu === psyone [n=simon@p508C51EC.dip.t-dialin.net] has left #ubuntu [] [04:26] xukun: I am looking to see if k3b can do that. === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu === Lauree [n=lauree@cpe-66-65-133-77.nyc.res.rr.com] has joined #ubuntu === haka4 is now known as ce_sabar [04:26] i have ubuntu with gnome desktop and now i install kde (apt-get install kubuntu-desktop) how i chose between kde and gnome when i restart the pc ??? === zarulshahrin [n=zarulsha@178.58.49.60.klj02-home.tm.net.my] has joined #ubuntu [04:26] backpro, there is a button named "Sessions" on the login window [04:26] click on that and it will let you pick [04:26] along with a few other options like Failsafe GNOME, failsafe terminal etc. === Vorian [n=Steve@ubuntu/member/pdpc.supporter.active.Vorian] has joined #ubuntu === miip [n=miip@p54A57AF4.dip.t-dialin.net] has joined #ubuntu === ayoze [n=ayoze@175.Red-83-46-34.dynamicIP.rima-tde.net] has joined #ubuntu [04:27] backpro in your login screen there should be sessions button it should let u choose which session u want to boot into === misty_wrk [n=misty_wr@mail.borkholder.com] has joined #ubuntu [04:27] i dont find this button in my login screen === usser_ heh [04:27] anybody else's clamav stop working today? [04:27] hmm [04:27] Jack_Sparrow, no I already try that [04:27] backpro, might be some other names like "Options" or something similar [04:27] xukun: One way for sure is to convert it... http://www.linuxquestions.org/questions/showthread.php?t=224353 [04:27] depends on what GDM theme you are choosing too === AnRkey [n=AnRkey@host-83-146-42-229.bulldogdsl.com] has joined #ubuntu === quanmec [n=quanmec@ip-209-134-176-122.iss.net] has joined #ubuntu [04:27] ok thanks [04:28] no problem, hope that helped you :) === subpar [n=subpar@cpe-70-113-220-33.austin.res.rr.com] has joined #ubuntu [04:28] Jack_Sparrow, thanks [04:28] np === Noodlesgc [n=chatzill@199.218.108.5] has joined #ubuntu [04:28] I'm using Ubuntu 7.04. The problem is that Java appelt font in firefox is too big(I think it's 17-22), is there a way to make it smaller? I tried installing sun-java-fonts6 and msttcorefonts, but it didn't do anything [04:29] nickrud: I was able to complete the mediawiki install by cleaning up mysql users and databases with the mysql-admin, thanks for the help. === Zhora [n=extralap@77.87.119.18] has joined #ubuntu === ScorpKing [n=ScorpKin@vc-196-207-45-248.3g.vodacom.co.za] has joined #ubuntu === Zhora [n=extralap@77.87.119.18] has left #ubuntu [] [04:29] hi everyone. if i grep and filter the output of ifconfig ppp0 to get rx bytes eg 34355 and tx bytes 3456 how do i add them together in bash? === backpro [n=backpro@bzq-79-180-17-102.red.bezeqint.net] has left #ubuntu ["Leaving"] [04:29] !wifi [04:29] Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs === Shay_cyber5482 [n=ufrijfd@CBL212-235-2-65.bb.netvision.net.il] has joined #ubuntu [04:29] yjwong, thanks === Urilockz [n=urilockz@82-33-96-248.cable.ubr10.azte.blueyonder.co.uk] has joined #ubuntu === idaho45 [n=idaho@190.75.104.119] has joined #ubuntu [04:30] no problem, onats :) === sparrw [n=kvirc@71.16.203.242] has joined #ubuntu [04:31] Can someone please help me connect my Wifi, it was working, and now it won't connect. I'm using ubuntu 7.04 on a Dell inspiron 1420 === Neutrinux [n=Neutrinu@79.98.100-84.rev.gaoland.net] has joined #ubuntu === Shay_cyber5482 [n=ufrijfd@CBL212-235-2-65.bb.netvision.net.il] has joined #ubuntu [04:31] ScorpKing: result=$(($rx + $tx)) [04:31] hi all .. need some help plz, i would like to install the package "libc6" but when i am trying to install i get "error - conflicts with the installed package "tzdata" === radhios [n=radhios@unaffiliated/radhios] has joined #ubuntu === misty_wrk [n=misty_wr@mail.borkholder.com] has left #ubuntu [] [04:32] another question, how can I get my system updates to use my socks proxy? I have network proxy prefrences set, but it seems to ignore that (or not use it) === Skiessi [n=qwe@dsl-roibrasgw1-fe88fb00-133.dhcp.inet.fi] has joined #ubuntu [04:32] erUSUL: thanks. i'll try that. :) === Mgk [n=mgk@AMarseille-153-1-42-24.w86-197.abo.wanadoo.fr] has joined #ubuntu [04:32] yjwong, are you on ubuntu? === brad_ [n=brad@adsl-66-140-4-177.dsl.hstntx.swbell.net] has joined #ubuntu === b0ha [n=boha@BSN-210-245-36.dial-up.dsl.siol.net] has joined #ubuntu [04:32] yes [04:32] Shay_cyber5482: libc is already instaled in every linux distribution... [04:32] i want to change the root password [04:33] onats, yep [04:33] yjwong, the AMD site lists that the package they have on the web is only for redhat... === arghh2D2 [n=user@cpe-71-67-126-94.woh.res.rr.com] has joined #ubuntu [04:33] uh [04:33] you have to generate the debs for Ubuntu === Till__ [n=megatill@p4FD665CE.dip.t-dialin.net] has joined #ubuntu [04:33] generate it? [04:33] run the installer with sh ./ --buildpkg Ubuntu/feisty === capiira [n=capiira@dslb-088-065-195-103.pools.arcor-ip.net] has joined #Ubuntu [04:33] in a Terminal, of course [04:33] oh ok.. === x600 [n=x603@host-81-190-148-25.olsztyn.mm.pl] has joined #ubuntu === katho80 [n=thomas@T92da.t.pppool.de] has left #ubuntu [] === DShepherd [n=dwight@port0002-abm-static-adsl.cwjamaica.com] has joined #ubuntu [04:34] brad_: go to system > admin > users and groups > root > properties [04:34] Shay_cyber5482, if you need the developer headers install libc6-dev === Cody [n=cody@cel-broadband1-ws-95.dsl.airstreamcomm.net] has joined #ubuntu [04:34] Urilockz: thanks [04:34] !sudo | brad_ [04:34] brad_: sudo is a command to run programs with superuser privileges ("root"). Look at https://help.ubuntu.com/community/RootSudo for all information. === Chascon [n=chatzill@pc-110-100-83-200.cm.vtr.net] has joined #ubuntu === ScorpKing [n=ScorpKin@vc-196-207-45-248.3g.vodacom.co.za] has joined #ubuntu [04:35] yjwong, when i run the package installer, will it automatically replace my current vid driver? === McLovin [n=zac@c-68-62-182-53.hsd1.tn.comcast.net] has joined #ubuntu === arghh2D2 [n=user@cpe-71-67-126-94.woh.res.rr.com] has joined #ubuntu [04:35] onats, it won't === Till__ [n=megatill@p4FD665CE.dip.t-dialin.net] has joined #ubuntu [04:36] the installer generates three debian packages === ant30 [n=aperezar@19.Red-80-59-20.staticIP.rima-tde.net] has joined #ubuntu [04:36] one is the driver, the other is the kernel module, and the other is amdcccle [04:36] Flannel: I use sudo all the time, I needed the root password for the cups web interface === rockets [n=rockets@pool-71-247-35-247.nycmny.east.verizon.net] has joined #ubuntu === willdev [n=willdev@86.157.221.99] has joined #ubuntu [04:36] Paddy_EIRE: the sun java6 download works fine === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has joined #ubuntu [04:36] sudo passwd root [04:37] onats: now see that does not work. [04:37] jaw, good stuff nice one :D [04:37] can someone please help me connect my Wifi, it says connected but i can access the internet [04:37] what do I set the default sound card for my OSS drivers? [04:37] *how [04:37] "sudo passwd root" sets the password for root [04:37] the passwd program is not working [04:37] To triple boot vista-xp-ubuntu i should install XP first, then vista, then ubuntu, right? === urthmover [n=me@adsl-68-94-224-35.dsl.rcsntx.swbell.net] has joined #ubuntu === chica25_infoxp [i=infoxpSi@81.203.97.162.dyn.user.ono.com] has joined #ubuntu [04:38] yjwong: please do not recommend or encurage setting the rrot password is not supported here and against the desing of the distribution [04:38] rockets: xp or vista, and ubuntu last [04:38] !root | yjwong [04:38] yjwong: Do not try to guess the root password, that is impossible. Instead, realise the truth.. there is no root password. Then you will see that it is sudo that grants you access and not the root password. Look at https://help.ubuntu.com/community/RootSudo [04:38] kousotu, triple boot. === chica25_infoxp [i=infoxpSi@81.203.97.162.dyn.user.ono.com] has left #ubuntu [] === d2dchat [n=d2dchat@66.93.0.190] has joined #ubuntu [04:38] rockets: windows order does not matter [04:38] rockets: thats what id do but i have not exp with vista [04:39] yeah... sorry didnt read the whole thing:) === zren [n=zren@dslb-088-064-038-090.pools.arcor-ip.net] has joined #ubuntu [04:39] yjwong, i got an error, architecture not supported:( [04:39] kousotu, nope, if you install XP after vista, vista wont boot [04:39] kousotu, but thanks for talking out of your ass :-D === hendrixski [n=hendrixs@cpe-74-65-0-48.rochester.res.rr.com] has joined #ubuntu === constrictor [n=constric@82-70-24-5.dsl.in-addr.zen.co.uk] has joined #ubuntu [04:39] rockets: I have done it tyvm [04:39] so have i. === lotus-blade [n=lotus-bl@72-161-174-189.dyn.centurytel.net] has joined #ubuntu [04:40] vista uses a totally different boot loader === citronbleu-v [n=citronbl@lor34-1-82-240-236-19.fbx.proxad.net] has joined #ubuntu [04:40] well don't be dumb and split the partions for XP and Vista [04:40] hey, does anybody know of a plugin to a mail client that allows you to view .odt documents in it, without having to download and open them in OOo? [04:40] onats, what architecture are you on? [04:40] then put Ubintu last and all sould bot without any issues [04:40] hi I'm a debian user testing ubuntu, I'm wondering about root= option in grubs menu.list, in debian its just the path to the root filesystem, in ubuntu is it something like root=UUID=verylargenumber, can someone explain what that is [04:40] !alsa-oss [04:40] Sorry, I don't know anything about alsa-oss - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [04:40] !sound [04:40] If you're having problems with sound, first ensure ALSA is selected, by double clicking on the volume control, then File -> Change Device (ALSA Mixer). If that fails, see https://help.ubuntu.com/community/Sound - https://help.ubuntu.com/community/SoundTroubleshooting - http://alsa.opensrc.org/index.php?page=DmixPlugin - For playing audio files, see !Players and !MP3 [04:40] yjwong amd x64 [04:40] hendrixski: there is no such a thing afaik [04:40] what's the option for that? [04:41] zren, it's the UUID it never changes for the partitions unless you change the partitions [04:41] hmm, I'm not sure === frando_ [n=frando@drupal.org/user/21850/view] has joined #ubuntu [04:41] kitche, why can't i use the direct path or can i? [04:41] zren, prtty much if udev changes your partition order it won't matter for grub [04:41] http://www.youtube.com/watch?v=b9ifQvQCO7Y&mode=related&search= [04:41] erUSUL, :-( that's not good. MS Outlook does that for .doc ... and if we want .odt to compete we need things like that [04:41] zren yes u can [04:41] zren, you can but why would you === degrit [n=degrit@host138-228-dynamic.6-87-r.retail.telecomitalia.it] has joined #ubuntu === mortenwb [n=morten@84.211.131.63] has joined #ubuntu [04:41] microsoft have the same ideas [04:41] as ubuntu [04:41] lol === gary4gar [n=gary4gar@59.95.164.13] has joined #ubuntu === giany911 [n=giany911@84.232.210.63] has joined #ubuntu [04:42] erUSUL, I was looking through the thunderbird plugins, was hoping someone here heard of it... guess not [04:42] thanks :-) === pickett [n=pickett@ppp121-45-92-96.lns10.adl6.internode.on.net] has joined #ubuntu === peeps_work [n=peepsalo@bwext.kpimdp.com] has joined #ubuntu [04:43] kitche, I'm having some problems in boot up sequence because he cant mount the root filesystem, i was just wondering what kind of entry that is and if its afflicted with that problem === j_ack [n=j_ack@p508D81E2.dip0.t-ipconnect.de] has joined #ubuntu [04:44] zren, no that wouldn't affect your problem most likely === palm76 [n=palm76@cc908470-a.joure1.fr.home.nl] has joined #ubuntu [04:44] k thanks === Arcad3z [n=Arcad3@81.196.174.146] has joined #ubuntu [04:44] zren, since it's the same as /dev/sdXc === Jan__ [n=chatzill@e182077127.adsl.alicedsl.de] has joined #ubuntu === gangsterlicious [n=terii@12.110.209.75] has joined #ubuntu === Arcad3 [n=Arcad3@81.196.174.146] has joined #ubuntu === manci [n=manci@125.Red-83-53-105.dynamicIP.rima-tde.net] has joined #ubuntu === dmb [n=dmb@unaffiliated/dmb] has joined #ubuntu [04:45] erUSUL, I wasn't recommending anyone to set the root password, that was just an explanation of what the command does. Thanks for reminding anyway :) === atraeyu [n=atraeyu@vtelinet-216-66-97-54.vermontel.net] has joined #ubuntu [04:45] how to install gtk on 7.04 [04:45] ? [04:45] can't find the option for x64... === idaho45 [n=idaho@190.75.104.119] has joined #ubuntu === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu === flo__ [n=flo@p549B46AA.dip.t-dialin.net] has joined #ubuntu [04:46] Arcad3z it should be there [04:46] sh ./ --buildpkg Ubuntu/feisty <--- i'm getting an error that architecture is not supported... anyone? === calavera [n=cal@p178-031.ujaen.es] has joined #ubuntu === juan20 [n=k@125-238-204-138.broadband-telecom.global-gateway.net.nz] has joined #ubuntu === atraeyu [n=atraeyu@vtelinet-216-66-97-54.vermontel.net] has joined #ubuntu [04:47] onats, it appears that ATI does not support AMD64 architectures === Aminux [n=chatzill@bl7-246-183.dsl.telepac.pt] has joined #ubuntu [04:47] yjwong yes it does [04:47] printer setup newer terminate "Reading printer database" [04:47] /ubotu:smtp [04:47] ubotu:smtp [04:47] Sorry, I don't know anything about smtp - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [04:47] i have an error `must have glib installed get it from ...ftp.gtk.org. === shunter [n=rxlt@c-98-199-98-135.hsd1.tx.comcast.net] has joined #ubuntu [04:47] !gtk [04:47] GTK is the !GIMP toolkit, which forms the base of !GNOME and is used by many applications to provide a !GUI [04:47] usser_, what is the command-line option for the package then? === jack_wyt_ [n=jack@124.64.104.125] has joined #ubuntu [04:47] ubotu mail [04:47] onats what card u have? [04:47] mail is another medium to communicate. Ubuntu mailinglists can be found at http://lists.ubuntu.com [04:48] !glib [04:48] Sorry, I don't know anything about glib - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [04:48] hi [04:48] !postfi [04:48] Sorry, I don't know anything about postfi - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi === Jan__ [n=chatzill@e182077127.adsl.alicedsl.de] has left #ubuntu [] [04:48] !postfix [04:48] when i use "mail email@domain.com" to send an email i get an SMTP error, that my email was rejected for policy reasons. do i need to setup anything ?? [04:48] postfix is the default Mail Transfer Agent (MTA) for Ubuntu. Read more about setting it up here: https://help.ubuntu.com/community/Postfix or here: https://help.ubuntu.com/community/PostfixBasicSetupHowto === skyion [n=bradc@ns1.dcdata.co.za] has joined #ubuntu === bmc [n=bmc@c220-237-32-186.brasd1.vic.optusnet.com.au] has joined #ubuntu [04:49] juan20:https://help.ubuntu.com/community/Postfix/SPF?highlight=%28spf%29 === hendrixski [n=hendrixs@cpe-74-65-0-48.rochester.res.rr.com] has left #ubuntu ["Leaving"] === spheard [n=andrew@88-97-31-55.dsl.zen.co.uk] has joined #ubuntu === scipio_ [n=c@cpe-75-85-206-61.dc.res.rr.com] has joined #ubuntu === maxwolf [n=maxwolf@66.183.7.193] has joined #ubuntu [04:49] oh why does firefok keep bloody crashing? === ogra [n=ogra@ubuntu/member/ogra] has joined #ubuntu [04:49] how do I configure my machine to use a remote smtp server? [04:50] gilos: in what sense [04:50] gilos: client? [04:50] I want everything sent via a remote smtp server instead of directly from my machine. want to forward it to an authorized mail server. [04:51] usser, ati radeon 9550 === stefg [n=stefg@e179145199.adsl.alicedsl.de] has joined #ubuntu === PhilKC [i=PhilKC@freenode/staff/philkc] has joined #Ubuntu === Dr_willis [n=willis@74-140-6-108.dhcp.insightbb.com] has joined #ubuntu [04:51] gilos: google smarthosts [04:51] yjwong, really? but the installer is named with a x86_64 [04:51] onats did u download the installer from here http://ati.amd.com/support/drivers/linux64/linux64-radeon.html === frando_ [n=frando@drupal.org/user/21850/view] has joined #ubuntu === Infinito_ [i=lispecto@201-10-167-184.gnace701.dsl.brasiltelecom.net.br] has joined #ubuntu [04:52] gnome cups ad --> printer setup newer terminate "Reading printer database" === EspenG [n=espen@82.196.212.245] has joined #ubuntu === guybrush [n=guybrush@nat2.umh.ac.be] has joined #ubuntu === guybrush [n=guybrush@nat2.umh.ac.be] has left #ubuntu ["Quitte"] [04:52] ati-driver-installer-8.40.4-x86.x86_64.run <--- this is the filename [04:52] spheard: bump up the cache used for flash === boubbin_ [i=boubbin@80-248-247-190.cust.suomicom.fi] has joined #ubuntu === rightondev_ [n=foysavas@c-24-62-5-139.hsd1.ma.comcast.net] has joined #ubuntu [04:53] Frogzoo: ....on firefart? [04:53] spheard: are you crashing while flash is open? === techbie [n=atul@gridtutorial15.ba.infn.it] has joined #ubuntu [04:53] is it possible to change the screenmode to 32bit? [04:54] Frogzoo: er, not so much === lakin [n=lakin@S01060013101832ce.cg.shawcable.net] has joined #ubuntu === gribelu [n=bogdan@77-56-192-31.dclient.hispeed.ch] has joined #ubuntu === Moon [n=ohoem@more-og-romsdal-static226.bluecom.no] has joined #ubuntu [04:54] Aminux: i guess so, you could edit your xorg.conf === mortenwb [n=morten@84.211.131.63] has joined #ubuntu [04:54] spheard: ok, I don't know then === jughead [n=jughead@kubuntu.roams.utk.edu] has joined #ubuntu === Cphood [n=Jim@216.166.216.138] has joined #ubuntu === tupa [n=tupa@125.212.16.132] has joined #ubuntu [04:55] From the it's-about-time-department : http://linux.slashdot.org/linux/07/09/05/1328225.shtml [04:55] hmm [04:55] anyone who can help me a bit ? got a few problems my hp pavilion dv2130ea and ubuntu === nick__ [n=nick@adsl-75-12-159-212.dsl.stlsmo.sbcglobal.net] has joined #ubuntu [04:55] :) [04:55] !ask [04:55] Don't ask to ask a question. Just ask your question :) [04:55] renzo17: i tried to change to 32bit but then i couldnt get back into X === x89x [n=x89x@122.169.18.7] has joined #ubuntu [04:56] hey all were can i get a deb for amd64 flash player? [04:56] hello people === ex0r [n=m0rgoth@cmr-208-124-134-90.cr.net.cable.rogers.com] has joined #ubuntu [04:56] Aminux: are you sure your grafix car supports 32 bit? === bragi [n=bragi@nat-baluty.net-partner.pl] has joined #ubuntu [04:56] ati 9600 [04:56] ? [04:56] anyone know where i can find help fpr C# ? [04:56] !flash64 | nick__ , nowhere, follow this instaed: [04:56] onats hang on i'll try to build the package on my machine see if it works [04:56] nick__ , nowhere, follow this instaed:: You can run Flash, Real, and Java plugins in AMD64 bit computers with Firefox. see the steps to follow at https://help.ubuntu.com/community/FirefoxAMD64FlashJava [04:56] allright. 1. The sound was not working, then i got a tip to change to alsa mixer, that worked, but when both master and pcm is at 100% the soundlevel is just around 20% of what it should be [04:56] usser, are you on amd64? === zOrK [n=eclipse@72-59-22-190.adsl.tie.cl] has joined #ubuntu [04:56] onats yep [04:57] renzo17: ati 9600 [04:57] sh ./ --buildpkg Ubuntu/feisty <--- try this pls.. [04:57] why the debian installer cant mount the CD?, I got a msg: wanna try to mount the CD again? [04:57] !ping me [04:57] Aminux: which drivers are you using? [04:57] and i got stuck there [04:57] !intelhda | mortenwb [04:57] how does one go about installing fonts? [04:57] Sorry, I don't know anything about ping me - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [04:57] mortenwb: For fixing your Intel HDA sound this page has useful information https://help.ubuntu.com/community/HdaIntelSoundHowto [04:57] !fonts | kousotu [04:57] kousotu: Font installation basics here: https://help.ubuntu.com/community/FontInstallHowto - No fonts in Flash? Install "msttcorefonts" (from !Multiverse), "gsfonts", and "gsfonts-x11". No fonts in MPlayer? see !MPlayer === DreamCatcherX [n=borgirc@ip41-155-210-87.adsl2.versatel.nl] has joined #ubuntu [04:57] Alloha [04:57] how can i use regular expression with find? [04:57] ty [04:57] Aminux: could you post your xorg.conf on pastebin [04:57] zork: be more specific [04:57] !paste | Aminux [04:57] i do this: find /etc -regex [a-z] but it has no result... [04:57] Aminux: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic) [04:58] renzo17: driver AIGLX === Ieuan [n=xer@cpc1-pnth1-0-0-cust447.cdif.cable.ntl.com] has joined #ubuntu === drgonzo [n=dr@p54BB7A89.dip.t-dialin.net] has joined #ubuntu === manikfox [n=manikfox@d226-26-220.home.cgocable.net] has joined #ubuntu [04:58] onats im trying right now [04:58] the second problem is, i cant get tv-out to work. the [FN] + F4 combination works on my sisters hp with ubuntu, but not on mine [04:58] DreamCatcherX, i always just do a find whatever | grep regrexp [04:58] Aminux: thats not a driver, will be either ati, radeon or fglrx === qmx_ is now known as CactusWiZaRd [04:58] renzo17: and i also installed ati drivers === zOrK [n=eclipse@72-59-22-190.adsl.tie.cl] has joined #ubuntu === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has left #ubuntu [] [04:58] but ive not used find that much. so your way may be easier.. it MAY need to be quoted === zegevrijtt [n=virtual@77.249.27.214] has joined #ubuntu [04:58] but can you do that also with find Dr_willis? [04:58] mortenwb: which garphics card? === zOrK [n=eclipse@72-59-22-190.adsl.tie.cl] has left #ubuntu [] [04:58] is there anyway i can use my 3D accelerator for my VIA Deltachrome drivers ?? [04:58] Nvidia go 7200 === Ieuan [n=xer@cpc1-pnth1-0-0-cust447.cdif.cable.ntl.com] has left #ubuntu ["Ex-Chat"] [04:59] no quotes don't work [04:59] Aminux: could you paste your xorg.conf? [04:59] DreamCatcherX, pipe it to grep? of course. :) now as for your regrexp.. not sure. I tend to just use simple ones. [04:59] onats yep worked like a charm [04:59] usser, :(( [04:59] renzo17: but when i try to open ati catalyst it dont work [04:59] renzo17: ok [04:59] no errors regarding architecture? [04:59] is there anyway i can use my 3D accelerator for my VIA Deltachrome drivers ?? [04:59] x89x: openchrome or unichrome drivers [04:59] nope [04:59] mortenwb: run 'sudo nvidia-settings' (given you have used the restricted-manager to install the nonfree nvidia-driver) [04:59] openchrome [04:59] onats : openchrome [05:00] does anyone know a terminal irc client that has nicknames in diifferant colors === manikfox [n=manikfox@d226-26-220.home.cgocable.net] has joined #ubuntu === EspenG [n=espen@82.196.212.245] has joined #ubuntu [05:00] !anyone [05:00] A large amount of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? [05:00] x89x, pardon? [05:00] anyone know a good shell proxy that i can compile on a shell i have [05:00] stefg: the Restricted Driver Manager is running the Nvidia accelerated graphics driver, its enabled and in use === pickett [n=pickett@ppp121-45-92-96.lns10.adl6.internode.on.net] has joined #ubuntu [05:01] onats: Its VIA Chrome9 HC IGP Family onboard === techbie [n=atul@gridtutorial15.ba.infn.it] has left #ubuntu [] === GarryFre [n=garry@adsl-63-207-239-56.dsl.chic01.pacbell.net] has joined #ubuntu [05:01] !paste | Aminux [05:01] Aminux: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic) === [diablo] [n=[diablo] @unaffiliated/miles/x-000000001] has joined #ubuntu [05:01] mortenwb: then sudo nvidia-settings should give you a control panel [05:01] Aminux: paste your xorg.conf [05:01] onats pastebin the whole thing plz === mathias_ [n=mathias@chello213047054216.31.11.tuwien.teleweb.at] has joined #ubuntu === MTecknology [n=MTecknol@138.247.249.53] has joined #ubuntu === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has joined #ubuntu === kutigaisx [n=floo@87.192.17.208] has joined #ubuntu [05:02] usser, http://pastebin.ca/682393 [05:02] x89x: https://help.ubuntu.com/community/OpenChrome === esimon [n=esimon@194.51.71.190] has joined #ubuntu [05:02] stefg: im looking at it now! [05:02] but its all black :p === esimon [n=esimon@194.51.71.190] has left #ubuntu ["Ex-Chat"] === b33r [n=b33r@212.36.206.40] has joined #ubuntu [05:03] morning [05:03] stefg: I have done everything. The 2D works but no 3D :( :( [05:03] http://pastebin.ca/682393 [05:03] renzo17:ok, i pasted [05:03] heh [05:03] how do you change the sound card that wine uses? === sfreak [n=sfreak@dsl2296.lakedalelink.net] has joined #ubuntu [05:03] mike6546, ask in #winehq [05:03] mortenwb: what does lspci | grep VGA say ? [05:03] http://paste.ubuntu-nl.org/36444/ [05:03] anyone from phil here? [05:03] thanks [05:03] np mike6546 [05:04] tupa ako, and there's ubuntu-ph [05:04] wow salamat === claudiu [n=claudiu@81.181.116.197] has joined #ubuntu [05:04] onats hm try issuing dpkg-architecture command === Kouryuu [n=mpark@sta-208-139-194-65.rockynet.com] has joined #ubuntu [05:04] onats it seems u missing dpkg-architecture [05:05] usser, you're right.. i dont have that command... [05:05] renzo17: did you see it? [05:05] onats which is really weird =) [05:05] Aminux: ok, at the moment you are using the open-source ati driver, not the proprietary one............if you want to see if the open driver can support 32bit then i'll make a change to your paste bin to see if that works [05:05] usser, is that in dpkg-dev? [05:05] erUSUL: thanks [05:06] onats i'd think its in dpkg === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu [05:06] stefg: it got it to work now, after a few attempts. What now [05:06] ahhhhh usser, you're a genius:D === JohanSalim [n=guest@ip84-223.cbn.net.id] has joined #ubuntu === vexati0n [n=vex@host-69-145-50-116.csp-wy.client.bresnan.net] has joined #ubuntu [05:06] Aminux: done it, notice the changes in the Section "Screen" part === taime1 [n=pedro@ip68-102-157-78.ks.ok.cox.net] has joined #ubuntu [05:07] onats heh )) ur setup is really strange dpkg is installed by default [05:07] Aminux: http://paste.ubuntu-nl.org/36445/ [05:07] usser, i dont know... never removed any packages so far... [05:07] how do you change the resolution of the gnome splash screen? [05:07] but its in dpkg-dev [05:08] renzo17: thanks so much :) [05:08] mortenwb: go to X Server Display configuration and detect displays... play arounf a bit, i can't guide you step by step === Virgo is now known as Shaka [05:08] im missing a lot of binaries! === kalis_bliumkvist [n=patrimpa@ctv-213-164-102-136.vinita.lt] has joined #ubuntu [05:08] kousotu: no problem [05:08] Aminux: restart X with Ctrl+Alt+Backspace and see if it will let you use the higher depth [05:08] stefg: i know you cant guide me, thanx for the help :) [05:08] onats well i can only say that this ati script is badly written its not supposed to use dpkg-architecture [05:09] damn dev channel is dead... [05:09] onats while theres uname which is installed on all unix systems [05:09] do you know who to set transparency automatically on opened windows? [05:09] renzo17: i do during the bootup or when im back in X? === Doomi [n=jacques@ip183.3.1411K-CUD12K-01.ish.de] has joined #ubuntu [05:09] can uname identify the x64? === tantillum [n=tantillu@216-196-74-147.polarcomm.net] has joined #ubuntu === Suporte [n=suporte@zeus.vipway.net.br] has joined #ubuntu [05:10] mortenwb: https://bugs.launchpad.net/ubuntu/+source/linux-restricted-modules-2.6.20/+bug/96473might be interesting for you [05:10] mortenwb: https://bugs.launchpad.net/ubuntu/+source/linux-restricted-modules-2.6.20/+bug/96473 might be interesting for you [05:10] is there an ubuntu-gaming or something room or is this it? [05:10] Aminux: you can do it in X, if you make changes to your xorg.conf, you can restart X without rebooting by pressing those keys === Davy_Jones [n=ad@87.109.217.105] has joined #ubuntu === ikonia [n=mattd@unaffiliated/ikonia] has joined #ubuntu === Doomi [n=jacques@ip183.3.1411K-CUD12K-01.ish.de] has left #ubuntu [] [05:10] !games | Urilockz [05:10] Urilockz: Information about games on Ubuntu can be found at https://help.ubuntu.com/community/Games and http://www.icculus.org/lgfaq/gamelist.php === Shaka [n=haywire@stealth.befree.it] has left #ubuntu [] === fozze [n=user@53.220.201.205.brainstorminternet.net] has joined #ubuntu === keito [n=keito@cpc2-leed2-0-0-cust11.leed.cable.ntl.com] has joined #ubuntu [05:11] usser, all the packages were created... [05:11] so, anyone know how to fix this error? dpkg-divert: cannot open diversions: No such file or directory [05:11] what's next? [05:11] !beryl [05:11] beryl is a window manager that takes advantage of an OpenGL accelerated X environment. Help in #ubuntu-effects === g1gaman [n=g1gaman@84.237.137.48] has joined #ubuntu === tantillum [n=tantillu@216-196-74-147.polarcomm.net] has left #ubuntu ["Leaving"] === W_o_r[l] d [n=Psico@151.73.83.41] has joined #ubuntu === Aminux [n=chatzill@bl7-246-183.dsl.telepac.pt] has joined #ubuntu [05:12] fozze: http://ubuntuforums.org/showthread.php?t=378531 [05:12] anyone here knowhow to install beryl? [05:12] onats first deinstall your ati packages [05:13] !effects | kousotu [05:13] kousotu: For help or discussion on Beryl or Compiz desktop effects, please go to #ubuntu-effects [05:13] renzo17: i pressed the Ctrl,Alt and Backspace keys === greenpower [n=player@gprs-pool-1-020.eplus-online.de] has joined #ubuntu [05:13] stefg: yah, i atried that, it doesn't work :( [05:13] stefg: I;m in there [05:13] usser, its telling me that there are conflicts, and what's installed is newer [05:13] renzo17: thats it? === Froggy32 [i=user234@host.250.67.23.62.rev.coltfrance.com] has joined #ubuntu [05:13] Aminux: did your screen go black then take back to your login promt? [05:13] the file exists and is readable === Froggy32 [i=user234@host.250.67.23.62.rev.coltfrance.com] has left #ubuntu [] [05:13] renzo17: or do i still have to change xorg.conf? === VisualStation [n=visualst@31.151-66-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu [05:13] kousotu: Did you read the topic? [05:13] kousotu: that was a friendly way of telling you that beryl is offtopic in here :-) [05:13] renzo17: yes,exaclty like that === tantillum [n=tantillu@216-196-74-147.polarcomm.net] has joined #ubuntu [05:14] onats omg wth [05:14] onats the one u downloaded is the latest [05:14] gentlemen, does anyone know, how to burn lightscribe label while using ubuntu? [05:14] Aminux: did you make the changes to your xorg.conf and save it before restarting X? === readon_ [n=readon@222.209.91.40] has joined #ubuntu [05:14] renzo17:no,i only pressed the keys === tantillum [n=tantillu@216-196-74-147.polarcomm.net] has left #ubuntu ["Ex-Chat"] === Twinxor [n=Twinxor@c-71-198-169-143.hsd1.ca.comcast.net] has joined #ubuntu [05:14] Kouryuu, then please direct your questions related to Beryl to that channel (#ubuntu-effects), thanks :) === riaal [n=riaal@87.96.195.71] has joined #ubuntu [05:14] stefg he's been "off topic" for the past 2 days in here [05:14] g1gaman: http://www.lightscribe.com/downloadSection/linux/index.aspx [05:14] renzo17: i have to change the xorg.conf too? [05:15] renzo17: those ar rpms [05:15] Kouryuu? now that's a new one lol [05:15] renzo17: those are rpms [05:15] kousotu* === Synchronicity [n=Stick@unaffiliated/relate] has joined #ubuntu [05:15] Aminux: makes the changes to it i suggested in your pastebin at http://paste.ubuntu-nl.org/36445/ then save it and restart [05:15] renzo17: as far as I'm aware none of the main burners support lightscribe lableing I've had to use external apps === anandanbu [n=phoenix@59.92.123.135] has joined #ubuntu [05:16] neverblue: I knew you meant me, but that's about the most interesting misspelling I've ever seen === neosimag1 [i=neosimag@c-24-5-180-215.hsd1.ca.comcast.net] has joined #ubuntu [05:16] brb, need to restart === zanimimotus [n=animimot@unaffiliated/animimotus] has left #ubuntu ["http://www.youtube.com/watch?v=_1eRgDGmXJE&NR=1"] [05:16] kousotu, its not a mis-spelling, its tab completion === neosimag1 [i=neosimag@c-24-5-180-215.hsd1.ca.comcast.net] has left #ubuntu [] [05:16] renzo17: just to confirm,these changes will make make use the ati proprietary drivers? === DeadLock [n=blah@12-214-50-87.client.mchsi.com] has joined #ubuntu === nickrud [n=nickrud_@adsl-69-230-161-27.dsl.irvnca.pacbell.net] has left #ubuntu ["Leaving"] === DeadLock is now known as MrDeadLock === Tribes [n=Tribes@pD9E87AED.dip.t-dialin.net] has joined #ubuntu === nico-linux [n=nicolas@86.69.129.160] has joined #ubuntu [05:17] g1gaman: http://www.linux.com/feature/118705 === poningru_ [n=poningru@159.178.41.60] has joined #ubuntu === qking [n=qking@ip3e839649.speed.planet.nl] has joined #ubuntu === alajlpaez [n=alajlpae@83.230.234.24] has joined #ubuntu === osmosis [n=steven@cpe-76-80-127-252.socal.res.rr.com] has joined #ubuntu [05:17] ola === voidless [n=tupa@125.212.16.132] has joined #ubuntu [05:17] Aminux: no, you will still be using the open source driver that you are using now........if you want to use the propreitary driver (assuming you already have it installed) change the line Driver "ati" to Driver "fglrx" [05:17] Actually kousotu, it's an OLD one ;) just not in this country. === Morrowyn [n=uhm@s5592119e.adsl.wanadoo.nl] has joined #ubuntu === Rover_ [n=kobe@ip-81-11-206-236.dsl.scarlet.be] has joined #ubuntu [05:17] Hi all. Is there a tutorial in helping to use CLI. I setup ubuntu server edition and i want to learn more. :-) === qking [n=qking@ip3e839649.speed.planet.nl] has left #ubuntu [] [05:17] ola === madp3ngu1n [n=madp3ngu@216-164-144-93.c3-0.eas-ubr9.atw-eas.pa.cable.rcn.com] has joined #ubuntu [05:18] MrDeadLock http://www.tldp.org [05:18] onats sorry im at work, so what happened? [05:18] Mplayer closes by itself when i try to play an .ogg video file [05:18] ikonia: Yes, thats a good one [05:18] g1gaman: http://www.lacie.com/products/product.htm?pid=10803 [05:18] neverblue: oh.. take ll the fun outa it.. === mcquaid [n=mcquaid@toronto-hs-216-138-233-79.s-ip.magma.ca] has joined #ubuntu [05:18] i have a prob and need a lil help === nabil [n=nabil@adsl-156-24-192-81.adsl.iam.net.ma] has joined #ubuntu [05:18] maddler, ask away :) [05:18] dang, it got me again :) [05:18] I installed the intel driver from the repos and changed the xorg.conf accordingly but when I restarted X I finniched having giant fonts [05:18] madp3ngu1n, [05:18] ikonia thanks. [05:18] !ask | madp3ngu1n [05:18] madp3ngu1n: Don't ask to ask a question. Just ask your question :) [05:18] help [05:19] ok sry [05:19] !ask | nabil [05:19] nabil: Don't ask to ask a question. Just ask your question :) [05:19] ima slow typer === InfiL00p [n=bowserj@S0106001217d30467.vc.shawcable.net] has joined #ubuntu [05:19] kousotu is there any chance you can stop making pointless comment [05:19] if unpack a .deb file on my desktop it should still be placed in the proper place correct? === ni1s_ [n=ni1s@1-1-4-36a.dre.sth.bostream.se] has joined #ubuntu [05:19] ikonia, I heard /ignore is very useful :) [05:19] yes. All of the files will be installed into the correct locations, mike6546 [05:19] how to install inte gma? [05:19] renzo17: ok,i just read that the proprietary drivers are slower than the ones that come with ubuntu. [05:19] renzo17: do you know how to run label creator? there is no item in alacarte, and command lightscribe is not recognized [05:19] how do you change the resolution of the gnome splash screen? [05:19] i cant get my windows os running because a spt.sys file and cant boot in safe mode to remove it any help === Amend2 [n=arthur@64.42.235.130] has joined #ubuntu [05:20] stefg: thank you. i'll read that carefully [05:20] !splash | taime1 [05:20] taime1: To change the Gnome splash screen, use !gnome-splashscreen-manager or change the GConf key /apps/gnome-session/options/splash_image using !gconf-editor. [05:20] Aminux: not heard that before but you could try both and see which works better for your system [05:20] madp3ngu1n this is ubuntu support - not windows support [05:20] onats do sudo dpkg --remove xorg-driver-fglrx fglrx-kernel-source fglrx-control === Amend2 [n=arthur@64.42.235.130] has left #ubuntu [] [05:20] I want to setup a server. File/Media possibly even a website. Would ubuntu server work well? Would it be better to start off with say XCFE or just stick with CLI. [05:20] onats and then install the packages that u got generated [05:20] SlimeyPete: so can I use a .deb of a newer version of a wine to overwrite an older version that I got with synaptic without problems? [05:20] MrDeadLock you can do that on the normal eddition as well as server [05:20] i know but im using ubuntu now as a duel boot..why can i load ubuntu and not windows [05:20] http://pastebin.ca/682425 [05:21] Is there anybody in here that knows cobol enough to just get me started? I'm just taking a sample program offline and trying to figure out how to compile it. http://pastebin.ca/682425 [05:21] i've installed debs from here: http://www.lightscribe.com/downloadsection/pse/ [05:21] sorry, i forgot the text for it [05:21] MrDeadLock, I find having the GUI helpful at times, if you have the space for it [05:21] g1gaman: there's even a howto for ubuntu, but it's german http://wiki.ubuntuusers.de/LightScribe . maybe bablefish or whatever can translate it [05:21] madp3ngu1n: pm me, I'll see what I can do to help [05:21] but can't run the software [05:21] mike6546: you can, but it's best to uninstall from synaptic first, otherwise a future systme update might conflict with the version you're about to install === CompJunki [n=smitch@cpc2-leic1-0-0-cust166.lei3.cable.ntl.com] has joined #ubuntu [05:21] Doesnt server edition. Use less resources. === Kilroo [n=Kilroo@cpe-071-076-173-175.triad.res.rr.com] has joined #ubuntu === degrit [n=degrit@host75-227-dynamic.6-87-r.retail.telecomitalia.it] has joined #ubuntu === jexsie [n=jexsie@unaffiliated/jexsie] has joined #ubuntu [05:21] Help === nabil [n=nabil@adsl-156-24-192-81.adsl.iam.net.ma] has left #ubuntu ["Konversation] [05:21] smileypete: thanks [05:21] !ask | CompJunki [05:21] my pc just crashed [05:21] CompJunki: Don't ask to ask a question. Just ask your question :) [05:21] g1gaman: did you read the instructions section [05:21] MTecknology: what compiler are you using under linux? im curious i havent had much luck with em [05:22] and everything isn't working correctly === BBHoss [n=Hoss@216.186.235.254] has joined #ubuntu [05:22] CompJunki, please keep your question to one line, thanks :) [05:22] MrDeadLock not that much difference, depends if you want this to be "production" class === ni1s_ [n=ni1s@1-1-4-36a.dre.sth.bostream.se] has joined #ubuntu [05:22] dyrne, OpenCOBOL [05:22] what command should i type in command ? === profanephobia [n=profanep@74-131-141-126.dhcp.insightbb.com] has joined #ubuntu === francis [n=francis@59.95.28.188] has joined #ubuntu [05:22] how do you add a modules to be modprobed at boot in ubuntu === flo_ [n=flo@p549B7A16.dip.t-dialin.net] has joined #ubuntu [05:22] renzo17: i didnt found one [05:22] sorry neverblue [05:22] i cant find /etc/rc.modules [05:22] !doesn't work | CompJunki [05:22] CompJunki: Doesn't work is a strong statement. Does it sit on the couch all day? Does it want more money? Is it on IRC all the time? Please be specific! Examples of what doesn't work tend to help too. === BigToe7000 [n=bigtoe70@cpc3-hatf3-0-0-cust792.lutn.cable.ntl.com] has joined #ubuntu [05:22] BBHoss: modprobe runs of the cli [05:22] neverblue: why do you like telling people what to do ? [05:22] I'd like to have it use as little resources as possible. [05:22] gud eve everyone [05:22] BBHoss: /etc/modules.conf [05:22] !offtopic [05:22] #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome! === nico-linux [n=nicolas@86.69.129.160] has joined #ubuntu [05:22] CompJunki, I said please :) (and thanks) [05:22] thanks ikonia [05:23] renzo17: oh, i see. excuse me, sir :) [05:23] g1gaman: on that link you just posted it says "click *here* for instructions" and some text drops down === malaiwah [n=mbelleau@modemcable227.25-131-66.mc.videotron.ca] has joined #ubuntu [05:23] MrDeadLock why ? what sort of spec machine do you have, what class of sservice are you offering ? [05:23] g1gaman: lol no probs [05:23] neverblue: how do i restore? [05:23] ikonia: is it usually empty? [05:23] CompJunki, I cannot be of further assistance [05:23] fuck you [05:23] BBHoss: hang on moment [05:23] CompJunki bye bye - bad language and rude [05:24] im on xubuntu 6.06 [05:24] !ohmy | CompJunki [05:24] CompJunki: Please watch your language and keep this channel family friendly. [05:24] how am i rude? [05:24] It's going to be for a home server. Media/Content along with torrent downloading. [05:24] CompJunki, that type of language is un-necesary [05:24] i was asking if you can help me [05:24] CompJunki using bad language ! [05:24] !attitude | CompJunki [05:24] and he was being ingorant [05:24] CompJunki: The people in this channel are volunteers. Your attitude will determine how fast you are helped. See also http://wiki.ubuntu.com/IrcGuidelines [05:24] ikonia, CompJunki neverblue lets please keep this channel ontopic, /ignore one another if necessary [05:24] wtf === novaless [n=stanless@ANancy-157-1-66-26.w86-213.abo.wanadoo.fr] has joined #ubuntu === readon__ [n=readon@222.209.84.213] has joined #ubuntu [05:24] g1gaman: onced its installed go to /opt/lightscribeApplications/ directory and look for something that looks like it might launch the prog [05:24] is there a way to change the resolution of my splash screen? [05:24] MrDeadLock just use the normal eddition, you'll not see much benifit from running the server edition [05:24] PriceChild: thanks === neverblue ignores PriceChild :) [05:24] CompJunki wtf is also not really a nice phrase ? [05:25] erm [05:25] all i ask was for some help [05:25] ok ? [05:25] renzo17: oh, yes, i will. thank you === mode/#ubuntu [+o PriceChild] by ChanServ === mode/#ubuntu [+b %*!*@unaffiliated/ikonia] by PriceChild === mode/#ubuntu [-o PriceChild] by ChanServ [05:25] damn === ultr1 [n=ultra@67-58-207-111.amtelecom.net] has joined #ubuntu [05:25] CompJunki, please ignore... [05:25] k === Spec[x] is now known as Spec === nico-linux [n=nicolas@86.69.129.160] has joined #ubuntu [05:25] ikonia: Is there a way i could use Normal Ed. For setup. Then actually run it in a non gui mode. === greenpower [n=player@gprs-pool-1-020.eplus-online.de] has joined #ubuntu === entz81 [n=endy@125.160.80.9] has joined #ubuntu === harmental [n=ricardo@AGrenoble-152-1-115-232.w90-4.abo.wanadoo.fr] has joined #ubuntu [05:25] laters all === xplode_me [n=mac@89-180-47-253.net.novis.pt] has joined #ubuntu [05:25] PriceChild: can you help me [05:25] hey anybody willing to help a bit on getting the cube to work in compizfusion? i have the other effects working just not the cube [05:26] are daily gutsy builds live cds ? [05:26] taime1: that can't be scaled dynamically. all you can do is manually scale an existing splash up with gimp. and replace the smaller one. but that's real work [05:26] !gutsy | xplode_me [05:26] xplode_me: Gutsy Gibbon is the code name for the next release of Ubuntu (7.10) | (due October 2007) | It is development software, as such unstable, support _only_ in #ubuntu+1 [05:26] like the final? [05:26] MrDeadLock, you could have the OS not load the gdm, but if your going to do that, then just dont install it === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu [05:26] hallo, is any body can tell my how i can get the curses library? please === rofltosh [n=rofltosh@resnet228-19.resnet.buffalo.edu] has joined #ubuntu [05:26] MrDeadLock, you can always setup the gdm/kdm later, if you miss the GUI [05:26] !find ncurses [05:26] Found: evms-ncurses, lib64ncurses5, lib64ncurses5-dev, libncurses5, libncurses5-dbg (and 13 others) === ni1s_ is now known as ni1s [05:26] can someone give me the default sources.list for gutsy , pls ? [05:26] i cannot be of further assistance my ass. === pickett [n=pickett@ppp121-45-92-96.lns10.adl6.internode.on.net] has joined #ubuntu [05:27] stefg: i wonder why my splash screen is now hanging most of the way off the screen after i installed nvidia driver.. [05:27] no one helps here [05:27] lokk === kapo [n=kapo@217.54.64.2] has joined #ubuntu [05:27] CompJunki, please keep your question to one line, and be clear what your asking [05:27] i asked a question [05:27] and you go off and ignore me [05:27] I have server edition installed now, and am installing XCFE atm. I just wanted other people's opinions on what would be the best solution. [05:27] ok i try it [05:27] !patience | CompJunki [05:27] CompJunki: The people here are volunteers, your attitude may determine how fast you are helped. Not everyone is available all the time, likewise not every answer is available instantly. See also http://wiki.ubuntu.com/IrcGuidelines [05:27] wtf is wrong with this channel [05:27] kids settle down [05:27] damn [05:27] CompJunki: pls keep it civil [05:28] some channel suppott === grimboy [n=grimboy@85.211.236.250] has joined #ubuntu [05:28] like windows support to me [05:28] anyone use dpkg-divert? [05:28] taime the proprietary nvidia driver uses a different timting formula, so you have to readjust the screen. and probably your gdm reso doesn't match your user-reso === ni1s [n=ni1s@1-1-4-36a.dre.sth.bostream.se] has joined #ubuntu [05:28] claudiu: i am [05:28] could you give me the default sources.list for gutsy , pls ? [05:28] trying to anywasys === nexact [n=nexact@ip041.250-51-69.Sogetel.net] has joined #ubuntu [05:28] !easysource | claudiu [05:28] claudiu: source-o-matic is a webpage where you can (re)generate your sources.list - http://www.ubuntu-nl.org/source-o-matic [05:28] i just want to know how to reinstall while im here [05:28] CompJunki: okay, [05:28] what is your question compjunki [05:28] hello all, what's the fastest way to generate entropy ? [05:28] !gutsy | claudiu [05:28] claudiu: Gutsy Gibbon is the code name for the next release of Ubuntu (7.10) | (due October 2007) | It is development software, as such unstable, support _only_ in #ubuntu+1 [05:28] and i have files on here [05:28] compiledkernel, you're an idiot. [05:28] i need to fix my px [05:28] pc [05:29] ubotu: thanks, what a nice bot we have here [05:29] claudiu: ah gutsy sorry [05:29] CompJunki, You're an idiot. [05:29] BBHoss: my system crashed on me === alcoholic [n=wickedso@42.159.70.202.dynamic.max.com.pk] has joined #ubuntu === Usrl [n=Usrl@c-69-247-164-232.hsd1.ks.comcast.net] has joined #ubuntu [05:29] and everything is not working === czaveri [n=czaveri@203.193.154.194] has joined #ubuntu [05:29] just reinstall [05:29] like Berly [05:29] stefg: its only the splash screen which has this problem. and my gdm and user res are the same... [05:29] and compiz === amias [n=amias@85-211-254-18.dsl.pipex.com] has joined #ubuntu [05:29] nexact: throw your computer out of the next window ? :-) === UB` [n=mik@stargate.fastweb.it] has joined #ubuntu [05:29] !guidelines | centrex_ [05:29] centrex_: The people in this channel are volunteers. Your attitude will determine how fast you are helped. See also http://wiki.ubuntu.com/IrcGuidelines [05:29] centrex_: your a dick === kung [n=kung@L21f5.l.pppool.de] has joined #ubuntu [05:29] stefg, im generating my gpg key... [05:29] yeah beryl and compiz tend to do that [05:29] PriceChild, i'm not looking for help. [05:29] how can i fix it ? [05:29] CompJunki, please I'm already watching you, don't rise to things like this. === Metal03 [n=ubuntu@bas1-quebec14-1168094936.dsl.bell.ca] has joined #ubuntu [05:30] hello everyone , hope you are all having a nice day === mode/#ubuntu [+o PriceChild] by ChanServ === centrex_ [i=centrex@nat/digium/x-f2652e85285c5f9a] has left #ubuntu [requested] === mode/#ubuntu [+b *!*@nat/digium/x-f2652e85285c5f9a] by PriceChild === mode/#ubuntu [-o PriceChild] by ChanServ [05:30] i would boot into recovery mode and use apt-get to remove those packages === Borut [n=Fonda@BSN-95-239-38.dial-up.dsl.siol.net] has joined #ubuntu [05:30] nexact: mouse-movements are pretty popular. read /dev/input/mouse [05:30] stefg, it's on a server.. heheh ;] === mode/#ubuntu [+o PriceChild] by ChanServ === mode/#ubuntu [+b centrex*!*@*] by PriceChild === Cyrus25801 [n=cyrus@dsl-243-18-165.telkomadsl.co.za] has joined #ubuntu === mode/#ubuntu [-b *!*@nat/digium/x-f2652e85285c5f9a] by PriceChild === mode/#ubuntu [-o PriceChild] by ChanServ === lukas2 [n=lukas@p4FC4BFF2.dip0.t-ipconnect.de] has joined #ubuntu [05:30] GPG error: http://packages.medibuntu.org feisty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 2EB [05:30] CompJunki: what seems to be the problem, maybe i can help [05:30] Hi there, how do I start the recovery console? === francis_ [n=francis@59.95.32.228] has joined #ubuntu [05:31] thanks claudiu [05:31] compiz messed up === panique [n=rechner@dslb-084-060-139-016.pools.arcor-ip.net] has joined #ubuntu === Sn00p [n=fv@bl9-179-222.dsl.telepac.pt] has joined #ubuntu [05:31] when system crashed [05:31] you have to backtrack and undo what you did [05:31] Metal03, within Gnome, ctrl-atl-f key [05:31] CompJunki: uhum [05:31] omg [05:31] why can linux fix an os [05:31] after a crash [05:31] ? [05:31] CompJunki: it said omg ? [05:31] i used to access my ubuntu folders from my windows pc but it i cant anymore windows just tells me the folder isn't accessable or i don't have premission.pls help [05:31] just follow the guide backwards [05:31] i'm trying to upgrade from feisty to gutsy by using ' gksudo "update-manager -d" ' but its says i need 576mb more diskspace on a partition that has 2.8G free [05:31] thats what you need to work on guys === miip_ [n=miip@p54A57AF4.dip.t-dialin.net] has joined #ubuntu [05:32] to get the system to restore [05:32] after a crash [05:32] neverblue : And when should I type this? [05:32] How do i shutdown Ubuntu serv. from commandline? [05:32] or something [05:32] Cyrus25801, have you setup Samba ? [05:32] compiz is alpha at best [05:32] so you dont have to keep manually installing [05:32] !effects [05:32] For help or discussion on Beryl or Compiz desktop effects, please go to #ubuntu-effects [05:32] CompJunki: one thought == one line or leave [05:32] Metal03, when in Gnome [05:32] after a damn crash [05:32] CompJunki: pls b more detailed [05:32] is warns you it might screw your system [05:32] MrDeadLock, 'sudo shutdown now -h' [05:32] neverblue: yes i have and it was woking fine till now === pickett [n=pickett@ppp121-45-92-96.lns10.adl6.internode.on.net] has joined #ubuntu === usser_ [n=dmitry@ool-18b8e9e6.dyn.optonline.net] has joined #ubuntu [05:32] this is linux not windows === PwcrLinux [n=DS_Staff@user-38q43kj.cable.mindspring.com] has joined #ubuntu [05:32] what controls the resolution of the gnome splash screen? [05:32] CompJunki: there are very few (if any) of the core Ubuntu devs in here - if you want to request a System Restore feature, it's best to log on to the Ubuntu launchpad and file a request :) === AngryElf [n=jsharpe@ip24-255-126-187.dc.dc.cox.net] has joined #ubuntu [05:32] When using a dark GTK theme shaded text looks bad, does anyone know how to change the shade color? [05:32] that way the devs will see it [05:32] system restore dosent work worth crap anyways [05:32] arrrgg === _Sick [n=kkk@p57B7D978.dip.t-dialin.net] has left #ubuntu [] [05:33] Cyrus25801, maybe you setup firewall settings, you had to have changed something in the past 24 hours, as it was working before [05:33] Is trying to run beryl with two monitors just a bad idea? [05:33] all system restore was ever good for for me was getting really concerned when I had to turn it off to fix a problem [05:33] AngryElf, with ATI yes :) [05:33] amias: maybe it is trying to download to another drive like a usb drivwe === nexact_ [n=nexact@ip041.250-51-69.Sogetel.net] has joined #ubuntu [05:33] neverblue: damn, it's "running" but i see no effects [05:33] SlimeyPete: SO YOU TELLLING ME YOU GUYS HAVENT THOUGHT ABOUTI T? === JuJuBee [n=JuJuBee@24-148-102-5.ip.mhcable.com] has joined #ubuntu === onats [n=julian@122.53.135.14] has joined #ubuntu === amol [n=amol@203.129.255.178] has joined #ubuntu === mode/#ubuntu [+o Hobbsee] by ChanServ === CompJunki [n=smitch@cpc2-leic1-0-0-cust166.lei3.cable.ntl.com] has left #ubuntu [requested] === carlesoriol [n=carlesor@252.Red-80-37-184.staticIP.rima-tde.net] has joined #ubuntu [05:33] neverblue: and I can't move stuff to the second screen [05:33] I am getting an error message with adept. "There was an error commiting changes. Possibly there wasa problem downloading some packages the commit would break". How do I fix this? === [HCI] MIkeB [n=salvia@cpe-24-175-189-28.stx.res.rr.com] has joined #ubuntu [05:33] thank god [05:33] CompJunki: "you guys"? Who do you think we are? We don't work for Ubuntu - we're just users like yourself. [05:33] neverblue: i was working on SynCE for my pda nothing else [05:33] AngryElf, please direct any more questions to #ubuntu-effects thanks ") [05:34] he must be 8 [05:34] Cyrus25801, no it first refered to /usr and then on the second run to /boot , both with different size requirement [05:34] tks [05:34] JuJuBee: #kubuntu [05:34] K [05:34] Cyrus25801, maybe check your samba settings, confirm its running, etc.. [05:34] usser, its ok now.. using the drivers that i downloaded.. thanks! [05:34] :) [05:34] but beryl still not working! [05:34] anyone know where the modules that load at boot config file is? [05:34] SlimeyPete: we hide well.. [05:34] neverblue: how do i do that === JohanSalim [n=guest@ip84-223.cbn.net.id] has joined #ubuntu === CompJunki [n=smitch@cpc2-leic1-0-0-cust166.lei3.cable.ntl.com] has joined #ubuntu [05:34] Cyrus25801, you set Samba up, did you not? === drgonzo__ [n=dr@p54BB61E5.dip.t-dialin.net] has joined #ubuntu === shriphani [n=shriphan@219.91.188.167] has joined #ubuntu [05:34] how the hell did you make me leave? === svolpe [n=Gerrath_@unaffiliated/gerrath] has joined #ubuntu [05:34] Hobbsee: :) [05:34] with out kicking me [05:35] >? [05:35] hax [05:35] amias: well that was just a thought. can't think of anything else [05:35] omg [05:35] how much lighter on resources is xubuntu compared to ubuntu/kubuntu?? [05:35] hi all ..i am trying ti install grub on usb in which i copied boot/grub/* folder but then also i am getting error as ~boot/grub/stage1 is not readable..how to install grub on usb [05:35] CompJunki, magic. Now please stay on topic. This channel is for support only. [05:35] i know toma [05:35] neverblue: yes i did === MTecknology [n=MTecknol@138.247.249.53] has joined #ubuntu [05:35] hax me ip=127.0.0.1 [05:35] BBHoss: /etc/modules [05:35] Cyrus25801, then you already know 'how do I do that' :) [05:35] CompJunki: now, behave. it's called a remove. [05:35] Is there some gnokii equivelent for motorola or just use gnokii for them too? [05:35] :) === Gerrath [n=Gerrath_@unaffiliated/gerrath] has joined #ubuntu [05:35] so i guess you guys have remote access to my pc? === Aminux [n=chatzill@bl8-4-185.dsl.telepac.pt] has joined #ubuntu [05:35] neverblue: well i set it up from synaptic package manager === entz81 [n=endy@125.160.80.9] has left #ubuntu [] [05:36] Cyrus25801, thats called installing, it will require a setup after installation [05:36] PriceChild: thats not right [05:36] amol: which device is your usb-stick? === vistakiller [n=spiros@ppp220-116.adsl.forthnet.gr] has joined #ubuntu [05:36] putting viruses on ubuntu [05:36] i could report this [05:36] CompJunki: no. put down the crack pipe. [05:36] and paste and screen shot this [05:36] neverblue: could you please help me go through that again === mode/#ubuntu [+b %CompJunki!*@*] by Hobbsee [05:36] CompJunki: no , there are people who run the IRC server who will remove you if you persistantly abuse the channel [05:36] CompJunki, no we don't, we just have access to this channel. [05:36] lol [05:36] renzo17: ok,i tried to boot with the changes in xorg.conf,but it didnt work [05:36] kick+ban [05:36] stefg:/dev/sdc1 === dudanogueira [n=duda@unaffiliated/bitdoidao/x-000001] has joined #ubuntu === Malder [n=Yourmom@cpe-76-175-75-172.socal.res.rr.com] has joined #ubuntu [05:36] renzo17: i could get into X [05:37] CompJunki: are you threatening us guys? === zyth [n=zyth@wnpgmb06dc1-0-52.dynamic.mts.net] has joined #Ubuntu [05:37] *couldnt === wishie [n=user@unaffiliated/wishie] has joined #ubuntu [05:37] !offtopic | Davy_Jones [05:37] Davy_Jones: #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome! === nephish [n=piv@63.98.191.58] has joined #ubuntu [05:37] Cyrus25801, no, sorry, there is lots of documentation on it online [05:37] !samba | Cyrus25801 [05:37] Cyrus25801: samba is is the way to cooperate with Windows environments. Links with more info: https://wiki.ubuntu.com/MountWindowsSharesPermanently and http://help.ubuntu.com/ubuntu/serverguide/C/windows-networking.html - Samba can be administered via the web with SWAT [05:37] amol: so copy the /grub -foldr out of /boot to the USB-stick again (probably as root) [05:37] there is a starting point for you === rightondev__ [n=foysavas@c-24-62-5-139.hsd1.ma.comcast.net] has joined #ubuntu [05:37] I have a 'kernel panic' error when I boot up. Is there any way I can just overwrite the kernel to fix it? [05:37] does anyone knows where to change the default ubuntu boot and put the texts of whats going on? [05:38] Davy_Jones: i think he just has no idea what's going on. [05:38] Malder: tap his shoulders [05:38] neverblue: the only setup i did was set a password. there wasn't anything else i had to do. but thanx anyway [05:38] Hobbsee: i did suggest 'hax'. i am sorry :) [05:38] stefg:yes i copied as a root grub folder once again [05:38] Toma-: :) [05:38] dudanogueira, edit the grub config and use the 'nosplash' and perhaps 'nofb' options, then rerun update-grub [05:38] stefg:then === piglit [n=piglit@cc104481-a.groni1.gr.home.nl] has joined #ubuntu [05:38] how can i get my gnomesplash to go back to normal resolution after installing nvidia driver? [05:38] amol: then open a terminal, and enter sudo grub . you'll get a grub prompt [05:39] dudanogueira: To see it one time, hit ESC during grub, edit the default kernel line to remove from the end splash and quiet. [05:39] renzo17: ? [05:39] i am building a PC for a lady at work, and I am deciding between putting windows or ubuntu on it. I would prefer ubuntu, but have to know its going to be able to do what she needs. Internet stuff is fine, and i know Ubuntu is capable of that.. What i am concerned about though, is her Printer. Its an Epson Photo Stylus R230, and she wants to be able to print photos from her camera on it. A4 and also 6'x4' photo paper. Where can i find out about the state [05:39] Dr_willis, i want the similiar boot from dapper drake, so i can figure out where the boot is stucking [05:39] dudanogueira, /boot/grub/menu.lst and change the 'splash' entry to 'nosplash' then run update-grub to make it the default. [05:39] amol: type 'find /grub/stage1' at the grub prompt [05:39] wishie: i dobelieve the R230 is supported [05:39] Cyrus25801, no problem [05:39] Davy_Jones: ? === genii hands Dr_willis a coffee [05:40] Dr_willis, genii thanks! [05:40] stefg, 'sudo update-grub' should force a rebuild of the initramfs which contains the bootsplash stuff [05:40] Toma-: i myself have an R210 (which i havent used in over a year) but its support was limited, unless i used the "TurboPrint" (commercial) drivers === helloRobot [n=hellorob@CPE-69-76-35-26.wi.res.rr.com] has joined #ubuntu === GIn [n=Ginnnn@s5591bc47.adsl.wanadoo.nl] has joined #ubuntu [05:40] dudanogueira, # defoptions=quiet nosplash nofb is my Exact line. [05:40] wishie, might want to check the forums for support for the device [05:40] dudanogueira, and yes keep the # there. :) [05:40] wishie: i usually go off this list http://openprinting.org/printer_list.cgi === supamatt [n=matt@modemcable108.150-82-70.mc.videotron.ca] has joined #ubuntu [05:41] has anyone completed an upgrade from feisty to gutsy using update-manager ? [05:41] i basically need to know if photo quality prints are available on that printer in ubuntu. Id MUCH rather give her this new pc with linux on it, as opposed to windows. especially since its got such simple tasks (no gaming etc) [05:41] wishie: epson is the best supported brand (along HP) ... don't worry [05:41] stefg:file not found eroor came === kousotu [n=kousotu@adsl-68-79-207-137.dsl.emhril.ameritech.net] has joined #Ubuntu === sharperguy [n=sharp@88-109-90-183.dynamic.dsl.as9105.com] has joined #ubuntu === Rprp` [n=Rprp@cc763024-b.groni1.gr.home.nl] has joined #ubuntu [05:41] amias: is there a way to run update-grub from a live CD? My server isn't booting because of an apparent initramfs error [05:41] !anyone | amias [05:41] amias: A large amount of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? [05:41] amias === bulmer [n=obama@adsl-69-232-231-78.dsl.pltn13.pacbell.net] has joined #ubuntu [05:41] stefg: do you know if (for me this is) the direct cd printing works now ? [05:41] amias: I updated to feisty... from dapper though [05:41] wishie: yes full res printing will be fine. === Jacek_Kendysz [i=Jacek_Ke@unaffiliated/JacekKendysz] has joined #ubuntu [05:41] amol: so there is a /grub folder on the stick, noot /boot/grub , right? [05:42] wishie: did you see if her printer is listed there? [05:42] wishie: ooooooh bummer. its a paperweight. http://openprinting.org/show_printer.cgi?recnum=Epson-Stylus_Photo_R230 [05:42] !printer | wishie [05:42] wishie: Printing in Ubuntu is done with cups. See https://help.ubuntu.com/community/Printers - https://wiki.ubuntu.com/HardwareSupportComponentsPrinters - http://www.linux-foundation.org/en/OpenPrinting - Printer sharing: https://wiki.ubuntu.com/NetworkPrintingFromWindows [05:42] Dr_willis, # defoptions=quiet nosplash nofb locale=pt_BR MY exact one now :) [05:42] Davy_Jones: im checking the site now [05:42] hello all, what's the fastest way to generate entropy im generating my GPG key and it's stuck at 282 bytes remaining ? [05:42] Malder, fun wasn't it :) replacing init is no small matter === stefan__ [n=stefan@i577BC4C3.versanet.de] has joined #ubuntu === stefan__ [n=stefan@i577BC4C3.versanet.de] has left #ubuntu ["Verlassend"] === kutigaisx [n=floo@87.192.17.208] has joined #ubuntu [05:42] stefg:s [05:42] nexact: move your mouse lots [05:42] skonta [05:42] nexact: type random things into a text editor [05:42] Hobbsee, I'm under ubuntu-server === UB` [n=mik@stargate.fastweb.it] has joined #ubuntu === CyberMad [n=cyber@61.94.10.161] has joined #ubuntu [05:43] Hobbsee, so I gotta do it via console.. [05:43] http://openprinting.org/show_printer.cgi?recnum=Epson-Stylus_Photo_R230 [05:43] hmm [05:43] _not_ very promising [05:43] Frogzoo: i have another ubuntu 7.04 box i built not so long ago with no special config, its similar in hardware to the one you gave me help with, what would happen swapping HDD's over? [05:43] Malder: can you boot using recovery mode ? [05:43] nexact: clt-alt-left [05:43] amias: went off pretty much without a hitch... doesn't happen often for me [05:43] amias: no... same error [05:43] nexact: vi is a text editor. === snocone [n=Anon@216-67-63-169-cdsl-rb2.cwc.acsalaska.net] has joined #ubuntu === kauer [n=kauer@lochiel-wan-out.nullarbor.com.au] has joined #ubuntu [05:43] hey Hobbsee [05:43] Frosty|IDle: should boot no problems [05:43] no wait a second.. [05:43] stefg:#ls /media/usbdisk/ [05:43] autorun.bat autorun.pif BOSS/ grub/ RECYCLER/ [05:43] autorun.inf boot/ cdrom.ico isolinux/ .Trash-root/....this is the content of usb [05:44] hi kousotu [05:44] how be ye? === [HCI] MIkeB [n=salvia@cpe-24-175-189-28.stx.res.rr.com] has joined #ubuntu === NoVARaif_ [n=ianharge@c-69-255-176-137.hsd1.va.comcast.net] has joined #ubuntu [05:44] tired. [05:44] aren't oyou always though? [05:44] lol [05:44] Frosty|IDle, as long as your /etc/fstab uses UUID style names for the disks it should keep track of which is which [05:44] Hobbsee, if only writing in vi is generating entropy, ill just do cat /dev/urandom > data [05:44] and it's what, 2am? [05:44] Hm [05:44] Frogzoo: cool, going to test the old box with the connection and if that's ok just swap the disks over >:) === Thulanis [n=jonathan@host86-153-2-251.range86-153.btcentralplus.com] has joined #ubuntu [05:45] Which package is providing thinkpad-keys? === dshot [n=dshot@pdpc/supporter/active/dshot] has joined #ubuntu [05:45] amias: I get "Failed to execute /init" then kernel panic [05:45] amol: hmm... then either your bios can't see the stick, or the stick isn't bootable. (there seem to be brands that are simply not usable to boot from) === shunter [n=rxlt@c-98-199-98-135.hsd1.tx.comcast.net] has joined #ubuntu [05:45] is there any way to force the udev automounting magic to happen? === vt220 [n=ineti@pool010.vpn.uni-saarland.de] has joined #ubuntu [05:45] apo: hotkey-setup [05:45] kauer: it is supposed to happen automagically. [05:45] anyone know to make ubuntu use 32bit color depth? [05:45] its almost 2am where i am :P [05:45] Hobbsee: is beryl compatable with Gutsy? cause Idon't like fusion [05:45] lo [05:46] nexact: that likely works too [05:46] !beryl | kousotu [05:46] kousotu: beryl is a window manager that takes advantage of an OpenGL accelerated X environment. Help in #ubuntu-effects [05:46] !fixres | Aminux [05:46] apo: i found out using the 'apt-file' command. you need to install apt-file to use it of course [05:46] Aminux: The X Window System is the part of your system that's responsible for graphical output. To restart your X, type sudo /etc/init.d/?dm restart in a console - To fix screen resolution or other X problems: http://help.ubuntu.com/community/FixVideoResolutionHowto [05:46] Toma-: Thanks. Can I somehow tell it not to start thinkpad-keys? [05:46] !faq [05:46] A list of common questions and answers about Ubuntu: http://help.ubuntu.com/community/CommonQuestions - Official documentation: http://help.ubuntu.com - IRC FAQ: http://wiki.ubuntu.com/IRCResourcePage === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu [05:46] kousotu: beryl isnt even *in* gutsy [05:46] Question about Feisty: I removed brltty and I'm still consistently getting permission denied and 'Line in use' on /dev/ttyUSB0 for my serial adapter that worked out of the box in Edgy. Any ideas here, I've rebooted and fussed around with this a fair amount already. [05:46] stefg:but i checked with cfdisk it is showing boot flag as enable [05:46] I noticed [05:46] and yes, I tried as root === rick_ [n=rick@71-212-78-225.tukw.qwest.net] has joined #ubuntu [05:46] Toma-: when finding what package a file belongs to, dpkg -S works aswell === SunWuKung [i=SunWuKun@S01060016cbc4c705.vc.shawcable.net] has joined #ubuntu [05:46] Toma-: saves having to install apt-file i guess [05:47] amol: but that's an issue of the bios and/or the flash-controller on the stick. cfdisk uses the kernel, a completly different story === lukas2 [n=lukas@p4FC4BFF2.dip0.t-ipconnect.de] has joined #ubuntu [05:47] good day all... I just installed (for the second time in as many days :)) Server 7.04 on my Dell Poweredge SC420. Given that I'm rusty with linux, I managed to screw it up badly enough yesterday that it wouldn't boot :) ... So, I reinstalled this morning, and I apt-get'ed the gnome-desktop-environment and x-window-system packages. Something doesn't look right. For example, yesterday, I could, through X, see GPartEdit (I think [05:47] shriphani: yes. thank you. Let me rephrase the question: Is there any way to force the udev automounting magic to happen? === Drunken-Ktulhu [n=max@213.141.151.212] has joined #ubuntu === rick_ [n=rick@71-212-78-225.tukw.qwest.net] has left #ubuntu ["Ex-Chat"] === kekko [n=kekko@host81-154-231-10.range81-154.btcentralplus.com] has joined #ubuntu === rick_ [n=rick@71-212-78-225.tukw.qwest.net] has joined #ubuntu [05:47] wishie: apt-file searches thru non-installed packages [05:47] Toma-: ahh ok === rick_ [n=rick@71-212-78-225.tukw.qwest.net] has left #ubuntu ["Ex-Chat"] [05:48] wishie: infinitely useful when compiling aswell === bnoll [n=bnoll@mail.openlogic.com] has joined #ubuntu === shad0w1e [n=jay@xd83917e2.ip.e-nt.net] has joined #UBUNTU [05:48] stefg:so how i can make it as bootable? [05:48] is there any way to configure a hardware raid on linux? [05:48] apo: you could remove it from your rc levels [05:48] Toma-: didnt even know about apt-file. been a long time since i used a debian based system. only starting to use ubuntu on a few machines now. [05:48] shad0w1e: hardware raid doesn't get configured through the OS - it's in hardware [05:48] <[HCI] MIkeB> ok im having a problem connecting to efnet...keeps telling me no ident response [05:48] I don't have a screen hooked up to my server, so doing it in BIOS will be a pain === tuxmaniac [n=aanjhan@unaffiliated/tuxmaniac] has joined #ubuntu [05:48] <[HCI] MIkeB> i forget how to fix that [05:49] any suggestion for a visual db design system for ubuntu? === taisho87 [n=taisho87@ppp-120-60.21-151.libero.it] has joined #ubuntu [05:49] [HCI] MIkeB: install pidentd ? midentd or similar i believe [05:49] amol: i'm not sure it's possible at all. investigate if your bios can do it, or if you can update it, and check if this type of stick is bootable at all === kauer [n=kauer@lochiel-wan-out.nullarbor.com.au] has left #ubuntu [] [05:49] Malder, i know it's usually done that way.... so there's no Linux app that can talk to your hardware? [05:49] kauer: you can restart the udevd daemon by running "sudo /etc/init.d/udev restart" === jeff_ [n=jdlouhy@129.10.174.223] has joined #ubuntu [05:49] shad0w1e: all you need is a driver for the raid card [05:49] Frogzoo, then what === apeitheo [n=bth@166.66.102.254] has joined #ubuntu === ugarit_ [n=chatzill@66.9.32.98] has joined #ubuntu [05:49] Toma-: K in front of a file in /etc/rc*/ means that it's not supposed to start, right? [05:50] Or was it vice-versa? === [HCI] MIkeB [n=salvia@cpe-24-175-189-28.stx.res.rr.com] has left #ubuntu [] [05:50] apo: K means the script is executed when leaving the level === pierrette [n=pierrett@ANice-251-1-60-150.w86-211.abo.wanadoo.fr] has joined #ubuntu [05:50] ^^^ [05:50] For some reason I can't connect to other people on my local LAN who have iTunes (through rhythmbox's DAAP support), but I can connect to others who have rhythmbox--what could be the problem? === dexem [n=dani@191.Red-88-23-206.staticIP.rima-tde.net] has joined #ubuntu [05:51] shad0w1e, its very unlikely , hardware raid is deeply proprietary ( an IMHO no better than software raid) and so cannot be configured through linux , what are you using [05:51] apo: should only be in /etc/rc2.d just remove it === richard_ [n=joe@71-220-211-239.eugn.qwest.net] has joined #ubuntu === Latty [n=Latty@host86-132-245-251.range86-132.btcentralplus.com] has joined #ubuntu === mcsd [n=admin@64.90.240.38] has joined #ubuntu [05:51] or chmod -x it === jono [n=jono@ubuntu/member/jono] has joined #ubuntu === Castigador [n=Alfredo@88.Red-80-38-9.staticIP.rima-tde.net] has joined #ubuntu [05:51] Toma-: Alright, thanks [05:51] np === usser_ [n=dmitry@ool-18b8e9e6.dyn.optonline.net] has joined #ubuntu [05:51] amias, well thanks.... im using a supermicro server with no screen hooked up and i kind of wanted to avoid carrying a screen into the server room [05:51] apeitheo: i think the latest iTunes daap is not compatible with rhythmbox [05:51] apeitheo, do you have avahi installed === utp216 [n=utp216@c-69-137-52-22.hsd1.md.comcast.net] has joined #ubuntu === [HCI] MIkeB [n=salvia@cpe-24-175-189-28.stx.res.rr.com] has joined #ubuntu === adnans [n=adnans@ip56576f04.direct-adsl.nl] has joined #ubuntu [05:51] n/m ... google to the rescue === usser_ just updated his video driver remotely from work )) [05:51] hey guys i need a little help on an smb fileserver i set up. it is password protected and after a certain amount of time it kicks the users off... [05:51] If i install ubuntu, get my server programs all installed and start at boot up. Is there a way to make ubuntu only load into CLI until I want to login to an X to say install/modify something. [05:52] stefg:is there any other way to make usb as bootable? bcoz i don't know how to upgrade bios... [05:52] i had heard that iTunes had been "improved" by removing compatibility === Lumpy^ [n=asasas@mail.crazymind.co.il] has joined #ubuntu === Lumpy^ [n=asasas@mail.crazymind.co.il] has left #ubuntu [] [05:52] shad0w1e, ok so that should allow you to control the bios via serial console ( i.e null modem to another linux machine ) === Laggyware [n=Latty@host217-43-229-146.range217-43.btcentralplus.com] has joined #ubuntu === spellweaver [n=spellwea@80.253.53.110] has joined #ubuntu [05:52] amias, that's more confusing than just hooking up a screen, but thanks === taisho87 [n=taisho87@ppp-120-60.21-151.libero.it] has joined #ubuntu === Volodiaja [n=volodiaj@crj95-3-82-237-148-103.fbx.proxad.net] has joined #ubuntu === greenpower [n=player@gprs-pool-1-020.eplus-online.de] has joined #ubuntu [05:53] btw, where do I pick up a serial console? i hear everyone uses it to hack routers and stuff [05:53] shad0w1e, thats how the big boys do it [05:53] MrDeadLock: You'll have to remove gdm from your rc levels [05:53] I guess === Volodiaja [n=volodiaj@crj95-3-82-237-148-103.fbx.proxad.net] has left #ubuntu [] [05:53] shad0w1e, run minicom === taisho87 [n=taisho87@ppp-120-60.21-151.libero.it] has left #ubuntu ["Ex-Chat"] [05:53] amol: you have to find out first if the bios is the problem, or if the stick is the problem. some sticks simply won't boot, while another brand does it. But if your bios isn't even capable of booting from usb, you just can't do it.... === Menasim1 [n=chatzill@89.5.117.99] has joined #ubuntu [05:53] amias , thanx [05:53] shad0w1e: Any decent electronics store.. Fry's or something similar === BBHoss [n=Hoss@216.186.235.254] has left #ubuntu [] [05:54] what do they cost? === soothsayer [n=user@bas16-montreal02-1242357234.dsl.bell.ca] has joined #ubuntu [05:54] like $15 === StarQuake [n=StarQuak@ip51cfbfaa.direct-adsl.nl] has joined #ubuntu [05:54] ahh no way! [05:54] hey guys i need a little help on an smb fileserver i set up. it is password protected and after a certain amount of time it kicks the users off... [05:54] There's no easy switch way. If i setup say VNC on ubutu server edition, would i be able to VNC into it with a desktop interface or no? === Howitzer [n=sagara@37.212-64-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu === Rprp` [n=Rprp@cc763024-b.groni1.gr.home.nl] has joined #ubuntu [05:54] shad0w1e, real men make their own ;-) === blaster [n=root@r6dp11.net.upc.cz] has joined #ubuntu [05:54] but I don't recommend feisty, as some strange issue beyond brltty is causing me to not be able to use my usb->serial adapter ;(( === blaster [n=root@r6dp11.net.upc.cz] has left #ubuntu [] === shapur [n=archibug@host237-124-dynamic.6-87-r.retail.telecomitalia.it] has joined #ubuntu === JohanSalim [n=guest@ip84-223.cbn.net.id] has joined #ubuntu === regis_ [n=regis@86.53.66.177] has joined #ubuntu [05:55] has anyone had any good luck with those USB -> Serial port adapters? === wishie [n=user@unaffiliated/wishie] has left #ubuntu [] === Soup_ [n=glenn@c-68-44-211-161.hsd1.pa.comcast.net] has joined #ubuntu [05:55] richard_, sounds like one of the other clients is forcing an election , try running wireshark to see whats actually happening on the network [05:55] Yeah, they work great === finalbeta [n=viper@d54C6865D.access.telenet.be] has joined #ubuntu [05:55] anyone know a good Winrar Gnome app? [05:55] anyone can help me with Firehol? [05:55] stefg:by using same bios i created once other usb as bootable but this is Transcend mp3 player(1GB) === nickrud [n=nickrud_@216.112.213.2.ptr.us.xo.net] has joined #ubuntu === onats [n=julian@122.53.135.14] has joined #ubuntu [05:56] amol: so this might be the prob... use another stick === Almighty1Henaro [n=a_hen@c-24-98-20-28.hsd1.ga.comcast.net] has joined #ubuntu [05:56] amias it is a simple network of just a couple clients all accessing the same file.... [05:56] plug it in ( unless you're me and using feisty ;(( ) and cu --speed=9600 --line=/dev/ttyUSB0 and you're ready to roll ( or whatever your terminal settings should be for the device you're connecting to ) === qcshzihnus [n=qcshz@222.66.104.106] has joined #ubuntu === regis_ [n=regis@86.53.66.177] has left #ubuntu ["Ex-Chat"] [05:56] richard_, cool that will mean you will be able to keep up with the packets in wireshark === piratepenguin [n=declan@213-202-162-125.bas503.dsl.esat.net] has joined #ubuntu === Zorak [n=ajmiller@75.108.239.94] has joined #ubuntu === adnans [n=adnans@ip56576f04.direct-adsl.nl] has joined #ubuntu === gary4gar [n=gary4gar@59.95.167.223] has joined #ubuntu [05:57] Is there any way to update the kernel from a live CD? [05:57] amias, is wireshark easy to use? [05:57] wireshark is very simple [05:57] richard_, well i find it easy but you might not , i don't know you [05:57] so is tshark if you need console-based tools === qaldune [n=qaldune@89.128.173.231] has joined #ubuntu [05:57] well even if i see another computer kicking the other off it would still be a configuration issue... === cedricshock [n=cedric@71-220-203-10.eugn.qwest.net] has joined #ubuntu === faemir [n=faemir@85-211-16-164.dyn.gotadsl.co.uk] has joined #ubuntu === lix [n=lix@77-57-8-215.dclient.hispeed.ch] has joined #ubuntu === pic_sarun [n=sarun@itnbkks32.loxinfo.co.th] has joined #ubuntu === B_166-ER-X [n=ghost@c207.134.132-45.clta.globetrotter.net] has joined #ubuntu [05:58] richard_, you could try upping the OS level in your servers /etc/samba/smb.conf , this would give it a greater chance of winnign the election [05:58] stefg:thanks..1 more question i want to install ubuntu in my lab but all are connected in local lan ..but not connected to internet as well not having cdrom drive...then how to install === zyth [n=zyth@wnpgmb06dc1-0-52.dynamic.mts.net] has joined #Ubuntu [05:59] ok i'll try that === dew [n=dew@c-69-248-63-87.hsd1.nj.comcast.net] has joined #ubuntu [05:59] amol: mount the cdrom on another machine and share its contents via http === StarQuake [n=StarQuak@ip51cfbfaa.direct-adsl.nl] has joined #ubuntu [05:59] Greetings everyone === sunnypies [i=ashlon@nat/novell/x-59241063f8634f11] has joined #ubuntu [05:59] well crud, I was hoping someone would have a quick non-obvious answer to my usb->serial issue in Feisty... everything I seem to Google yammers about uninstalling brltty, which still doesn't seem to solve my issue. Nothing special going on when I strace opening up the device, just something stupid going on somehow. [05:59] 1 [05:59] msg nickserv identify prettyis1 === Nicke [n=niclasa@ua-83-227-140-135.cust.bredbandsbolaget.se] has joined #ubuntu [06:00] sunnypies, please change your password immediately [06:00] amias any other ideas before i drive 45 minutes to go take a look at this? === iivoli [n=iivoli@a88-113-255-119.elisa-laajakaista.fi] has joined #ubuntu === bmsilva24 [n=bruno@193.136.129.223] has left #ubuntu [] [06:00] PriceChild: good thing that was the wrong one [06:00] sunnypies, in future, use the server tab to log in, so if you miss the / you dont' give your password to anyone else [06:00] amias:is there any good document to share cdrom via http? [06:00] sunnypies, or add the password to your client's autoconnect script [06:00] PriceChild: lol i noticed but wrong passwrod yall === mode/#ubuntu [+o PriceChild] by ChanServ === mode/#ubuntu [-b %*!*@unaffiliated/ikonia] by PriceChild === mode/#ubuntu [-b %CompJunki!*@*] by PriceChild === mode/#ubuntu [-o PriceChild] by ChanServ [06:01] anyone know a good Winrar Gnome app? [06:01] PriceChild: I got a question, im tssh: connect to host 151.155.2.22 port 22: Connection refused [06:01] "rying to ssh into a box and I'm getting " === Ray_at_UW [n=ruiboli@128.95.172.27] has joined #ubuntu [06:01] PriceChild: and the firewall is off === francis_ [n=francis@59.95.18.220] has joined #ubuntu === hermann_348 [n=hermann_@M3643P022.adsl.highway.telekom.at] has joined #ubuntu [06:01] sunnypies, I don't know sorry, please don't address your initial questions to someone as others who can help may think you are already receiving help and not answer. [06:01] http://www.pennergame.de/ref.php?refid=6460491 [06:01] is sshd running on the target box? === mode/#ubuntu [+o PriceChild] by ChanServ [06:01] amol:i did your googling for you this time - http://ubuntuforums.org/showthread.php?t=797 === hermann_348 [n=hermann_@M3643P022.adsl.highway.telekom.at] has left #ubuntu [requested] === mode/#ubuntu [+b *!*@M3643P022.adsl.highway.telekom.at] by PriceChild === mode/#ubuntu [-o PriceChild] by ChanServ === Bill_Cube [n=billcube@152.172.62.81.cust.bluewin.ch] has joined #ubuntu === asdf [n=jcaspe@203.111.234.21] has joined #ubuntu [06:01] Does anyone know if there's a way to keep Screenlets from minimizing when I press CTRL-ALT-D or the "Show Desktop" button? [06:01] PriceChild: good thing you know all the nitty gritty rules of irc =) === immoT- [n=defaultu@e82-103-200-141.elisa-laajakaista.fi] has joined #ubuntu [06:02] sunnypies, it'll help you :) [06:02] sunnypies: is sshd running on the target box? === Bill_Cube [n=billcube@152.172.62.81.cust.bluewin.ch] has left #ubuntu [] === Malder [n=Yourmom@cpe-76-175-75-172.socal.res.rr.com] has left #ubuntu [] [06:02] sipior: whats the command to check that? === The_Machine [n=The_Mach@65.91.185.36] has joined #ubuntu === Sandeep_Kamath [n=lol@59.96.25.35] has joined #ubuntu === tom__ [n=tom@212.106.18.175] has joined #ubuntu [06:02] sunnypies: on the target machine, try "netstat -antu | grep 22" [06:03] tommakefile [06:03] sipior: ok one minute [06:03] PriceChild, all that user need do is restart their internet connection and someone else will be banned instead === Manny [n=chris@p5496CE3F.dip.t-dialin.net] has joined #ubuntu [06:04] amias, we are aware of that thanks. === Vendeta [n=vijay@202.141.25.92] has joined #ubuntu === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu === slabby [n=slabby@cpc2-basf1-0-0-cust595.nott.cable.ntl.com] has joined #ubuntu === ld [n=ld@89.136.134.116] has joined #ubuntu === Yono [n=Yono@cpe-24-59-36-12.twcny.res.rr.com] has joined #ubuntu === darlek [n=upon@CPE000f3d513fb5-CM0011ae927866.cpe.net.cable.rogers.com] has joined #ubuntu [06:05] hello ppls === RainCT [n=RainCT@unaffiliated/rainct] has joined #ubuntu [06:05] hi [06:05] darlek hi [06:05] what's the place for licensing questions about Ubuntu? [06:05] Well, I solved my issue with the USB->Serial [06:05] How do I add a user named webftp to the group www-data? === fnf [n=vanhtu19@58.187.121.85] has joined #ubuntu [06:05] Anyone have any ideas about my problem? [06:05] FYI, 'cu' for whatever reason doesn't work === Vorian [n=Steve@ubuntu/member/pdpc.supporter.active.Vorian] has joined #ubuntu [06:05] utilized minicom and setup a minirc.USB and 'minicom USB' works great === teb [n=tebriel@c-76-20-250-55.hsd1.ga.comcast.net] has joined #ubuntu [06:06] so strange that cu is bugging out [06:06] sipior: when we tried to start sshd it returned "failed" === pochomon [n=ubuntu@200.106.45.152] has joined #ubuntu [06:06] slabby: what happens when you use adduser? === Trevi [n=Trevi@host238-129-dynamic.12-79-r.retail.telecomitalia.it] has joined #ubuntu [06:06] anyhow, take care === dshot [n=dshot@pdpc/supporter/active/dshot] has left #ubuntu [] [06:06] sunnypies: and if you try starting the daemon manually? /usr/bin/sshd or whatever [06:06] darlek, what is the syntax? [06:07] slabby: gksu gedit /etc/group is one way but be careful i take no responsibility :) [06:07] sunnypies: /usr/sbin/sshd === TheListener [n=matt@24-236-154-243.dhcp.aldl.mi.charter.com] has joined #ubuntu === pochomon [n=ubuntu@200.106.45.152] has left #ubuntu ["Ex-Chat"] === taisho87 [n=taisho87@ppp-120-60.21-151.libero.it] has joined #ubuntu === _vortex is now known as vortex [06:07] sipior: would i type "/usr/sbin/sshd start"? [06:07] sunnypies: no, just /usr/sbin/sshd === sven_ [n=sven@62.216.221.165] has joined #ubuntu === Juki [n=juki@dsl-hmlbrasgw1-ff0ec100-135.dhcp.inet.fi] has joined #ubuntu [06:08] sunnypies: sudo /usr/sbin/sshd, actually === newTruth [n=dcabanis@cpc2-cbly2-0-0-cust821.glfd.cable.ntl.com] has joined #ubuntu [06:08] type adduser -D and it will show default settings [06:08] OH SWEET! I NEED A SERIAL CONSOLE!! where can I get it for 15$ ? === sven_ [n=sven@62.216.221.165] has left #ubuntu ["Ex-Chat"] === wracko [n=wracko@201.86.252.97.adsl.gvt.net.br] has joined #ubuntu === soneil [n=soneil@86.45.194.32] has joined #ubuntu [06:08] slabby, sudo usermod -a G www-data webftp [06:08] darlek, thanks got it [06:08] sipior: the computer is in different room, i will try that === bentob0x [n=laurent@ip-213-49-72-111.dsl.scarlet.be] has joined #ubuntu [06:09] slabby: try also http://www.linuxheadquarters.com/howto/basic/adduser.shtml === SyntraX [n=syntrax@82.119.88.252] has joined #ubuntu === taisho87 [n=taisho87@ppp-120-60.21-151.libero.it] has left #ubuntu ["Ex-Chat"] [06:09] np [06:09] shad0w1e, use a nearby linux box and ssh into it and run minicom === Gaaaston [n=hledoux@18.175-65-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu [06:09] np [06:10] darlek, I just need to set the folder to 775 now === SyntraX is now known as desertrose_ [06:10] amias, what's minicom do for me? === wracko [n=wracko@201.86.252.97.adsl.gvt.net.br] has left #ubuntu [] [06:10] darlek, is that sudo chown /var/www 775 === jumbers_ [n=john@ool-457dc6cb.dyn.optonline.net] has joined #ubuntu === Shaka [n=haywire@unaffiliated/shaka] has joined #ubuntu === mrhex [n=hexworks@85.194.162.6] has joined #ubuntu [06:10] hi [06:10] shad0w1e, saves you $15 , its a software terminal emulator === Latty [n=Latty@host81-129-253-234.range81-129.btcentralplus.com] has joined #ubuntu [06:11] amias, I run minicom on the server or client? [06:11] shad0w1e, for serial ports [06:11] Someone can help me configuring firehol? [06:11] slabby: sudo chmod 755 /var/www as I think chown sets owner by name not number (guess) [06:11] anyone correct me please ;) === zipola [n=zipola@zip.kortex.jyu.fi] has joined #ubuntu === borg__ [n=olaf@80.149.17.21] has joined #ubuntu [06:11] darlek, thanks [06:11] shad0w1e, on the client (i,e the nearby machine not the one with the raid) === Sn00p [n=fv@bl9-179-222.dsl.telepac.pt] has joined #ubuntu [06:12] amias, can I run it on a machine that's a VM on the one with the raid? === mystic_pinguin [n=opensour@85.139.140.83] has joined #ubuntu [06:12] sipior: when we did /usr/sbin/sshd it said "execution requires an absolute path" [06:12] speaking of www users, if I have a user who can edit their files but not upload new ones, any permissions I should check out? === RainCT [n=RainCT@unaffiliated/rainct] has left #ubuntu ["Leaving."] === Cphood [n=Jim@216.166.216.138] has joined #ubuntu === bluefox83 [n=bluefox@dynamic-acs-24-239-249-234.zoominternet.net] has joined #ubuntu [06:13] hello, i am having some Windows XP <-> ubuntu 7.04 samba connectivity issues, i am trying to log on from ubuntu onto my xp machine to get some files on a share, but the passwords is not accepted. i even created a user test/test on the xp machine but it will not let me log in. i have tried looking at many guides but they havent helped me out much. === luca [n=kvirc@host71-114-dynamic.8-87-r.retail.telecomitalia.it] has joined #ubuntu [06:13] hey guys does anyone know of a command that displays current xorg screen settings like refresh rate and resolution === helios4 [n=helios@ppp-205-106.33-151.iol.it] has joined #ubuntu [06:13] sunnypies: yuo could type the exact command line you used? [06:13] mrhex, you need to run smbuser -a [06:13] shad0w1e, er no , because your server machine will be in the BIOS (i.e not running linux yet) when you are doing this [06:13] can anyone recommend a decent VNC client? [06:13] !vnc [06:13] VNC is a protocol for remote desktop. https://help.ubuntu.com/community/VNCOverSSH describes how to use it securely. It works best over fast connections, otherwise look at !FreeNX [06:13] sunnypies: could you, rather === luca [n=kvirc@host71-114-dynamic.8-87-r.retail.telecomitalia.it] has left #ubuntu ["So] [06:13] sipior: type what? === n0v1_m311n [n=kiosk@125.164.202.58] has joined #ubuntu === gardar [n=gardar@dsl-212-199.hive.is] has joined #ubuntu === mariqn [n=mariqn@89.25.18.11] has joined #ubuntu [06:14] amias, ah. and how do I connect these boxes? with a standard serial->serial cable? === barbie [n=user@202.123.224.89] has joined #ubuntu [06:14] cox377 ultravnc is pretty good === grlubb [i=grlubb@c-75-67-72-224.hsd1.ma.comcast.net] has joined #ubuntu [06:14] cox377 thats for window [06:14] cox377 thats for windows === Core2QUAD [n=nivek@cpe-71-64-105-61.neo.res.rr.com] has joined #ubuntu === n0v1_m311n [n=kiosk@125.164.202.58] has joined #ubuntu [06:15] shad0w1e, i cannot find that command. === markelhas [n=mav@89.181.191.83] has joined #ubuntu [06:15] shad0w1e, skip to stage 3 on this - http://www.vanemery.com/Linux/Serial/serial-console.html [06:15] cox377, try tightvnc [06:15] mrhex, then make sure that smb/samba and smbfs packages are installed [06:15] what's a standard permissions level for www-data uses? I'm using 755 on directories and 644 for files [06:15] hi everyone! [06:15] sipior: so what command should i type my friend? === RatPackSopra [n=none@71-12-74-136.dhcp.gnvl.sc.charter.com] has joined #ubuntu === n0v1_m311n [n=kiosk@125.164.202.58] has joined #ubuntu [06:15] markelhas, hello doctor nick ! [06:15] usser_: i'm looking for a ubuntu to ubuntu client === francis_ [n=francis@59.95.21.125] has joined #ubuntu === pito [n=kiosk@125.164.202.43] has joined #ubuntu [06:15] mrhex, wait [06:15] need some help with my ubuntu === onats [n=julian@122.53.135.14] has joined #ubuntu === _Arcad3 [n=Arcad3@81.196.174.146] has joined #ubuntu [06:16] i've a asus m3n with 1 gb of mem, when i try to boot ubutun the system is very very very slow, slower than the livecd. I've made the memtest and no errors found. I've tested a different 512 mem and same problem. Later i've put a 256 mem and it works just fine. What can i do to use 1g mem in my ubuntu? === shinao1 [n=shinao1@196.207.1.30] has joined #ubuntu === RikkitProff [n=rikkit@77.50.89.24] has joined #ubuntu [06:16] mrhex sorry im confused. that's for setting up ubuntu as a server. my bad [06:16] shad0w1e, roger roger w8ing [06:16] the standard ubuntu terminal server client seems very slow [06:16] any ideas!? [06:17] amias, so cool, thank you!! [06:17] cox377, try XDMCP - see blog.amias.org.uk/title/What_on_earth_is_xdmcp [06:17] markelhas, you might have a bad HD === treedy [n=treedy@unaffiliated/treedy] has joined #ubuntu [06:17] hi guys [06:17] should i use "nano" to do something on console ? === Amo34 [n=juan@217.217.7.174.dyn.user.ono.com] has joined #ubuntu [06:17] bluefox83, why!? === Johto [n=whateva@dsl-kpobrasgw1-fedefa00-25.dhcp.inet.fi] has joined #ubuntu === flav_u [n=flav@212.206.77.83.cust.bluewin.ch] has joined #ubuntu [06:17] sunnypies: the exact command you used to start the ssh daemon [06:17] HD!!!! [06:17] anyone use webmin? I have a usermin user who can't upload new files but just edit existing ones. Any permissions to check or settings? [06:17] markelhas, because it sounds like your read/write times are really slow... === Dimensions [n=filter@78.86.1.87] has joined #ubuntu === onats_ [n=julian@122.53.135.14] has joined #ubuntu [06:18] bluefox83 yea but why 1gb is slow [06:18] hello all, i have a quick Q, i use feisty on my Main PC where as i have my core 2 quad and i use gnome and i love gnome, i have an older machine however that i used windows xp on that i would like to change to a ubuntu machine but it is a pentium 4 with 128mb ram and cannot run normal ubuntu with gnome as it requires 256mb ram i ran the live cd of xubuntu but didnt like it can anyone recommend another desktop envirnment i can install on u [06:18] markelhas, test your harddisk by running hdparm -tT /dev/sda1 ( or wherever it actually is) === KennethP__ [n=kpo@80.167.165.222] has joined #ubuntu [06:18] bluefox83 its not even supposed to use swap with 1gb memory should be enough === b0wlman [n=b0wlman@80-41-143-146.dynamic.dsl.as9105.com] has joined #ubuntu [06:18] Hie Guys and Galz ... ... i have a large (29 GB) .dmg file which i want to copy ... what is the best way to do it ... can it be copied using dd ??? i tried with cp but that will take abt 5 hours .... [06:18] bluefox83, but right now i'm using ubuntu with a old 256 sim and everything ok [06:18] should i use "nano" to do something on console ? === bluefox83 shrugs === furenku [n=furenku@189.146.243.244] has joined #ubuntu [06:18] i have a gig of ram, and sometimes things get sluggish... [06:19] Core2QUAD, use XDMCP to run a desktop session from your core2 machine on the p4 [06:19] markelhas u mean dimm simm is obsolete for 10 years now [06:19] sim [06:19] yes [06:19] the pentium 4 machine is at another location [06:19] treedy: What are you trying to do? [06:19] i don't think the problem is in the hd [06:19] the only thing i can think of is that your power supply isn't pushing out enough power and everything is starving for power [06:19] bluefox83: I have 512, and things get sluggish, it's natural === jazzta [n=jazzta@AMontpellier-256-1-39-105.w90-28.abo.wanadoo.fr] has joined #ubuntu [06:19] Dimensions: sure, you could use dd, but specify a large block size... === claudiu [n=claudiu@81.181.116.197] has left #ubuntu ["Ex-Chat"] [06:19] an let me add, I'm using a laptop === genii makes a collage from old PC-66 and PC-100 sticks of RAM [06:20] Dimensions: depending on your disks, it may not be much faster than cp, frankly [06:20] /dev/sda1: [06:20] Timing cached reads: 670 MB in 2.00 seconds = 334.84 MB/sec [06:20] Timing buffered disk reads: 66 MB in 3.01 seconds = 21.95 MB/sec === jazzta [n=jazzta@AMontpellier-256-1-39-105.w90-28.abo.wanadoo.fr] has left #ubuntu ["Quitte"] [06:20] markelhas, disk seems fine to me [06:20] amias, timming is nice [06:20] yap === Ramunas [n=Ramunas@78-62-6-183.ip.zebra.lt] has joined #ubuntu === goundy [n=iGotIt@178.180-243-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu === effie_jayx [n=valles@ubuntu/member/effie-jayx] has joined #ubuntu [06:20] markelhas, are there errors in your Dmesg [06:20] sipior: you are right but dd from RH works many times faster .... [06:20] no other ideas/ === cardiomax2000 [n=cardioma@Mix-Toulouse-210-1-226.w193-248.abo.wanadoo.fr] has joined #ubuntu === chaky_ [n=chaky@unaffiliated/chaky] has joined #ubuntu [06:21] sipior: im not sure if we can use dd to copy a file thought ... i have used it for disk backups ... === cardiomax2000 [n=cardioma@Mix-Toulouse-210-1-226.w193-248.abo.wanadoo.fr] has left #ubuntu ["Ex-Chat"] [06:21] amias, i think no === Johto [n=whateva@dsl-kpobrasgw1-fedefa00-25.dhcp.inet.fi] has joined #ubuntu [06:21] Dimensions: i'm fairly certain it's the same dd :-) if the block size is appropriate, and the disk throughput isn't an issue, then you're good to go === _3v1n0_ [n=Trevi@host39-126-dynamic.9-79-r.retail.telecomitalia.it] has joined #ubuntu === Carnage\ [n=carnage@Xb72a.x.pppool.de] has joined #ubuntu [06:21] amias, i've found some think about a "The mysterious 880 MB limit on x86" [06:21] Dimensions: dd if="input" of="output" bs=something big === sayasupacrew [n=saya@77.199.70.105] has joined #ubuntu [06:22] amias, http://gentoo-wiki.com/FAQ_Linux_Memory_Management [06:22] Core2QUAD, there are lots of distros for low memory machines , google for them [06:22] I have a problem with my internet (Ubuntu). I have internet 5min,then disconect..then i have net .. and the same again. Where is the problem? Under windows i haven't any problems? === pickett [n=pickett@ppp121-45-92-96.lns10.adl6.internode.on.net] has joined #ubuntu [06:22] amias, says that i should recompile kernel!!!! [06:22] mariqn do u have dsl? [06:22] markelhas: you using ppp? === holymoly [n=new@mail.wjsgroup.com] has joined #ubuntu [06:22] mariqn wireless? [06:22] amias, does ubuntu kernel already compiled with this option!? [06:23] Frogzoo, can't say! === steve161 [n=steve@pool-71-247-81-42.nycmny.east.verizon.net] has joined #ubuntu [06:23] mariqn, need more info - is it wireless , what the hardware , what version of the drivers / firmware [06:23] usser_ pppoe(dsl) [06:23] markelhas: more details, so we don't all have to guess your setup [06:23] Frogzoo, what's that!? sorry? === [HCI] MIkeB [n=salvia@cpe-24-175-189-28.stx.res.rr.com] has joined #ubuntu [06:23] Frogzoo, sorry but i'm a little new on ubuntu/linux === FunnyLookinHat [n=funnyloo@64.140.73.93] has joined #ubuntu === no_gatez_fan [n=patrick@cpe-069-132-015-252.carolina.res.rr.com] has joined #ubuntu [06:24] markelhas: describe your setup [06:24] Frogzoo, when i boot my ubuntu i've to put noapic, cause otherwise it won't boot at all === _MattB_ [n=mp3@63-225-96-140.hlrn.qwest.net] has joined #ubuntu === kalal [n=khalaf@62.150.227.92] has joined #ubuntu [06:24] mariqn: more details, so we don't all have to guess your setup [06:24] Frogzoo, i've only ubuntu on my laptop, made the standard install === half [n=hechu@61.140.121.169] has joined #ubuntu [06:24] he means describe your hardware [06:25] Frogzoo, with noapic option === ShadowAKF [i=NYR@ool-18b9ba31.dyn.optonline.net] has joined #ubuntu [06:25] noapic is commom for laptops. so what kind of laptop? [06:25] Frogzoo, it's ASUS M3N with 1gm mem and a 60gb disk [06:25] centrino 1.6 ghz === ShadowAKF [i=NYR@ool-18b9ba31.dyn.optonline.net] has left #ubuntu [] === mangojambo [n=mj@201.86.75.57.adsl.gvt.net.br] has joined #ubuntu === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu === Core2QUAD [n=nivek@cpe-71-64-105-61.neo.res.rr.com] has left #ubuntu [] [06:26] http://www.overclockers.com/articles1235/ === b0wlman [n=b0wlman@80-41-143-146.dynamic.dsl.as9105.com] has joined #ubuntu [06:26] markelhas, if you can get to the desktop it might be worth running the cpu speed panel applet to see if acpi is slowing down your processor [06:26] it was 512m by default and i've a other 512m [06:27] I have screwed up my top panel, how can i revert it to default?? === elsiciliano [n=elsicili@d83-186-183-117.cust.tele2.be] has joined #ubuntu === Greyhound- [i=greyhoun@89.44.40.37] has joined #ubuntu [06:27] amias, but i'm running with noapic option! [06:28] markelhas, apic is Advanced Programmable Interupt Controller , its not the same as ACPI [06:28] i add to remove the 512m an put a 256m because of the performance problem that i talking [06:28] amias, oki sorry! === olek [n=olek@brf166.neoplus.adsl.tpnet.pl] has joined #ubuntu [06:28] amias, when i put the 512m the boot process takes something like 12-15 mins === Usrl [n=Usrl@c-69-247-164-232.hsd1.ks.comcast.net] has left #ubuntu [] === tommi_ [n=tommi@e212-54-14-244.elisa-laajakaista.fi] has joined #ubuntu [06:29] markelhas, how much memory does /proc/meminfo report under memtotal ? === radu_ [n=radu@89.137.121.161] has joined #ubuntu [06:29] i didn't try other linux distro, but i think this is no a problem form the distro === diafic_ [n=Greyscal@host86-131-25-232.range86-131.btcentralplus.com] has joined #ubuntu [06:29] amias, should i execute that command!? === WaxyFresh [n=r00t@199-2-59-123.dsl.dynamic.uninets.net] has left #ubuntu [] === lix [n=lix@77-57-8-215.dclient.hispeed.ch] has joined #ubuntu [06:30] markelhas, its a file , cat /proc/meminfo === sssSCH [n=ssssch@77.116.77.227] has joined #ubuntu [06:30] @ this momment i've the 256m === adelicc [n=adelicc@83.230.234.10] has joined #ubuntu [06:30] MemTotal: 766844 kB [06:30] MemFree: 8000 kB [06:30] Buffers: 1732 kB [06:30] Cached: 372868 kB [06:30] SwapCached: 30988 kB [06:30] Active: 515924 kB [06:30] Inactive: 137188 kB [06:30] HighTotal: 0 kB [06:30] HighFree: 0 kB [06:30] LowTotal: 766844 kB [06:30] LowFree: 8000 kB [06:30] SwapTotal: 2241028 kB [06:30] SwapFree: 2085132 kB [06:30] Dirty: 30404 kB [06:30] !paste | markelhas [06:30] Writeback: 0 kB [06:30] markelhas: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic) [06:30] markelhas, ppl use pastebin for that sort of thing [06:31] AnonPages: 276004 kB [06:31] Mapped: 83576 kB [06:31] Slab: 35332 kB === Kerttuli_ [n=jussi@82-128-216-116-Karjasilta-TR1.suomi.net] has joined #ubuntu === kekZpriester [n=luc@DSL01.212.114.230.166.ip-pool.NEFkom.net] has joined #ubuntu [06:31] SReclaimable: 21748 kB [06:31] markelhas: stfu [06:31] SUnreclaim: 13584 kB [06:31] PageTables: 3132 kB [06:31] markelhas, as it floods the channel [06:31] NFS_Unstable: 0 kB [06:31] Bounce: 0 kB === Zdra [n=zdra@185.228-243-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [06:31] CommitLimit: 2624448 kB [06:31] Committed_AS: 929580 kB [06:31] VmallocTotal: 253944 kB [06:31] I have screwed up my top panel, how can i revert it to default?? Please [06:31] VmallocUsed: 7664 kB === darlek [n=upon@CPE000f3d513fb5-CM0011ae927866.cpe.net.cable.rogers.com] has left #ubuntu [] [06:31] VmallocChunk: 246052 kB [06:31] sorry :( [06:31] sorry won't appen again === scipio_ [n=c@cpe-75-85-206-61.dc.res.rr.com] has joined #ubuntu [06:31] my thumb itches like crazy :( [06:32] markhelas : what happens if you just use the new memory and remove the old [06:32] bluefox83, scratch it [06:32] i bet i got bit by a dang mosquito [06:32] How long does it take to hack in new support for iPods under rhythmbox? [06:32] amias, this mem is not mine :( [06:32] amias, i've asked for a friend just to check. === dfgas [n=dfgas@adsl-69-215-150-60.dsl.milwwi.ameritech.net] has joined #ubuntu [06:33] CoasterMaster, uh....this isn't really a good place for that... [06:33] CoasterMaster, depends how good your coding skills are === Kwitschibo_ [n=Michael@dyndsl-091-096-017-073.ewe-ip-backbone.de] has joined #ubuntu [06:33] amias: touche :) === Aminux [n=chatzill@bl7-251-127.dsl.telepac.pt] has joined #ubuntu === anandanbu [n=phoenix@59.92.123.135] has left #ubuntu [] === Carnage\ [n=carnage@Xb72a.x.pppool.de] has joined #ubuntu [06:34] amias, i really like this distro, but can't solve this problem at all. i think that eaven if i try other like opensuse or fedora i'll have this problem... === Soulwarp [n=robby@8-81.127-70.tampabay.res.rr.com] has joined #ubuntu === sam__ [n=sam@dsl-29-9.cofs.net] has joined #ubuntu === radioman [n=user@ctv-213-164-123-111.vinita.lt] has joined #ubuntu [06:34] sipior: we figured it out, a bunch of permissions were changed but thanks for the help === Soup_ [n=glenn@c-68-44-211-161.hsd1.pa.comcast.net] has joined #ubuntu [06:34] markelhas, might be informative , remeber that livecd's will use some of the memory to cache the cd [06:34] how do I add a shortcut to ubuntu desktop? [06:35] for a folder [06:35] Frogzoo, can u give some ideias!? [06:35] Soup_, mu === Geek_ [n=Geek@cm209.delta20.maxonline.com.sg] has joined #ubuntu === soothsayer [n=user@bas16-montreal02-1242357234.dsl.bell.ca] has left #ubuntu ["ERC] [06:35] mu? === Trevi [n=Trevi@host171-134-dynamic.12-79-r.retail.telecomitalia.it] has joined #ubuntu [06:35] Soup_ : it means you asked a question that doesn't really make sense === olek [n=olek@brf166.neoplus.adsl.tpnet.pl] has left #ubuntu [] === Maciej13 [n=maciej13@aaya247.neoplus.adsl.tpnet.pl] has joined #ubuntu [06:35] Soup_: Open a terminal and type "ln -s /where/the/folder/is ~/Desktop/Nameoftheshortcut" [06:36] ok let me try again === dolog [n=doit@41.209.112.62] has joined #Ubuntu [06:36] amias, yes i think the livecd works just fine cause uses the 512m base. [06:36] Hi guys, I'm running Ubuntu on a PS3 and the only media player I can get to work correctly is Movie-Player (and it's not great) the rest all chop off the beginning of my songs... any tips? Finding it difficult to come up with good search terms. === Gary [n=Gary@colchester-lug/pdpc.supporter.active.Gary] has joined #ubuntu [06:36] somehow i made top menu disappear [06:36] hello [06:36] how do i make appear again? === Gary [n=Gary@colchester-lug/pdpc.supporter.active.Gary] has left #ubuntu ["now] [06:36] is there an EASY way to take a folder in my home directory and put a shortcut link to it on the desktop? In Xp you can right click and say create shortcut how can I do that in Ubuntu? === j_ack [n=j_ack@p508D81E2.dip0.t-ipconnect.de] has joined #ubuntu [06:37] Where I can get XChat for ubuntu ? === sharperguy [n=sharp@88-109-90-183.dynamic.dsl.as9105.com] has joined #ubuntu [06:37] Aminux, click another panel and choose New Panel [06:37] dolog in the ubuntu repo [06:37] dolog, sudo apt-get install xchat [06:37] Soup_ open a terminal and do "cd Desktop ; ln -s myfoldername myfoldername.shortcut [06:37] dolog opne add/remove programs and search for it [06:37] Is there any hardware expert around!? === syntux [n=Jad@unaffiliated/madeye] has joined #ubuntu [06:37] dolog, sudo aptitude install xchat [06:37] markelhas this is ubuntu support channel, not hardware debugging / support [06:37] is there a graphic way to do that or only command line [06:37] markelhas: you may wish to try a memtest on that box [06:37] Soup_, no idea [06:37] wooooooooooooooow [06:38] plz one Can help [06:38] ikonia, done that already [06:38] dolog whats the question [06:38] markelhas how long did you leave it running for ? === bastid_raZor [n=razor@dynamic-63-173-51-149.tvscable.com] has joined #ubuntu [06:38] ikonia, all night long [06:38] !ask | markelhas [06:38] markelhas: Don't ask to ask a question. Just ask your question :) [06:38] Well I can MAKE link and drag it there [06:38] Soup_ : right click and choose make link then move the like where you want it [06:38] neverblue, i've allready asked [06:39] Soup_: Right-click folder, make link, move link where you want it [06:39] how I can rest the Su passwd ? === amias hums lionel ritchie [06:39] dolog your not meant to [06:39] is there something I can install that will detect and install my wifi drivers? === grabbis [n=anders@static217-221.adsl.no] has joined #ubuntu [06:39] dolog your supposed to use sudo for root commands === grabbis [n=anders@static217-221.adsl.no] has left #ubuntu ["Ex-Chat"] [06:39] where it goes again. i've a asus m3n with 1 gb of mem, when i try to boot ubutun the system is very very very slow, slower than the livecd. I've made the memtest and no errors found. I've tested a different 512 mem and same problem. Later i've put a 256 mem and it works just fine. What can i do to use 1g mem in my ubuntu? [06:39] protocol2 most hardware will be auto detected [06:39] something like automatix? === benzss [n=huhu@80-42-132-162.dynamic.dsl.as9105.com] has joined #ubuntu === soederqvist [n=niklas@ua-83-227-189-95.cust.bredbandsbolaget.se] has joined #ubuntu [06:39] protocol2, restricted drivers manager [06:40] protocol2 no, %100 not automatix [06:40] ok === misnix [n=jkr@corona.xs4all.nl] has joined #ubuntu [06:40] Hur installerar jag drivrutiner fr soundblaster live 5.1 p ubuntu? [06:40] ikonia: I think There is some Command can rest it [06:40] markelhas, is it having issues with connecting to the network? where does the system hang, have you tried using safemode to see if the issues still occur ? === Carnage\ [n=carnage@Xb72a.x.pppool.de] has joined #ubuntu === xwind [n=tom@161.185.204.68.cfl.res.rr.com] has joined #ubuntu [06:41] dolog yes, but if you don't know it - you shouldn't be using it === krisk [n=krisk@216-214-189.0511.adsl.tele2.no] has joined #ubuntu [06:41] markelhas, sounds like you have two different sticks of RAM.. the 512 may not be compatible with your MB [06:41] Hey guys, could you help emd install drivers to my soundcard, it a soundblaster live 5.1 === krisk [n=krisk@216-214-189.0511.adsl.tele2.no] has left #ubuntu ["Ex-Chat"] === esperegu [n=jhaarman@145.116.10.215] has joined #ubuntu [06:41] thanks [06:41] neverblue, this os takes like 12-15 mins to startup, when it does any app, like terminal, takes tooooooooooooo long to open [06:41] now only 1 issues cant get 5.1 surround sound working [06:41] ikonia: Just give me it :) [06:41] anyone know how to transfer files from linux partition to windows partition? [06:41] anyone know anything about the beginnings of audio files getting muted/chopped ? happens with every media player I try except MoviePlayer which is vlc? I guess? [06:42] markelhas, when using the 256 it runs fine? [06:42] markelhas, i asked a series of questions though, can you please reply [06:42] bastid_raZor, i've tested 2 different 512m same problem, done the memtest to [06:42] bastid_raZor, yes === alus_ [n=ala@host-89-228-204-244.kalisz.mm.pl] has joined #ubuntu === karmelek [n=mateusz@host-134-162-karolina.igloonet.pl] has joined #ubuntu [06:42] neverblue, no i can connect to network, i've not test the samemode. [06:42] markelhas, to me it sounds like bad RAM. === BoSJo [n=bo@104.80-203-97.nextgentel.com] has joined #Ubuntu === rebegin [n=rebegin@catv-50620d37.catv.broadband.hu] has joined #ubuntu [06:43] bastid_raZor, the testmem says that the 2 512m that i test are ok. === linuxemacs [n=jelly@123.115.210.242] has joined #ubuntu === generay [n=no@69.182.29.172] has joined #ubuntu [06:43] markelhas, are the memory chips identical ? [06:43] Hi! anyone knows how I can get rid of this annoing error: http://paste.ubuntu-nl.org/36457/ [06:43] bastid_raZor, in windows work fine, but i now that different access. [06:43] (apt-get error) [06:43] a package can not be upgraded === g1gaman [n=g1gaman@84.237.137.48] has left #ubuntu [] === miip__ [n=miip@p54A55C78.dip.t-dialin.net] has joined #ubuntu [06:44] amias, nopes, on is king.... other don't now [06:44] *know [06:44] esperegu: Have you tried doing it as sudo? [06:44] any one Can give me the Command for rest password of root ? [06:44] dolog why do you want it [06:44] markelhas, what speed is the 256? (pc5200, pc3200?) what speed is the 512? [06:44] dolog you're supposed to use sudo [06:44] markelhas, one of them is probably slowing down the other === tim__ [n=tim@scylla.phys.psu.edu] has joined #ubuntu [06:44] bastid_raZor, i can't responde that right,cause i don't now [06:44] *know === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu === b_9 [n=gcurtis@cpe-24-210-18-79.columbus.res.rr.com] has joined #ubuntu === marine__ [n=marine@dsl-hvkgw1-fe6ffa00-119.dhcp.inet.fi] has joined #ubuntu [06:45] amias, the laptop was 512m base, and a bay to expand === sprash [n=sprash@e176248222.adsl.alicedsl.de] has joined #ubuntu === akujiki [n=akujiki@196.46.41.227] has joined #ubuntu [06:45] ikonia: Thanks I get The password just i was forget it , [06:45] Ray_at_UW: Yeah. that's not the problem. I have this error already for several months and did many updates in between. === elzbal [n=elzbal@v-static-145-65.avvanta.com] has joined #ubuntu [06:45] amias, the problem is when i expand the mem is a dim larger that 256 i think [06:45] markelhas, ok, that is what you need to find out. just any stick of ram will not work. it has to be the same speed and compatible with your MB. [06:45] markelhas, try it with a chip that exactly matches the existing one === Aminux [n=chatzill@bl7-251-127.dsl.telepac.pt] has joined #ubuntu [06:46] would someone recommend a source that explains how linux works and explains what processes and services are necessary and which aren't === Dimensions [n=filter@78.86.1.87] has left #ubuntu [] [06:46] b_9: tdlp.org [06:46] bastid_raZor, the 2 512 m where working with windows. [06:46] b_9, oops sorry http://www.tldp.org/ === marine__ is now known as _Bianca_ [06:46] b_9: -> tldp.org === darlok [n=elyon@c-71-205-67-153.hsd1.mi.comcast.net] has joined #ubuntu [06:47] amias, i cant check the exiting one. cause it's not accessible. === tim__ [n=tim@scylla.phys.psu.edu] has joined #ubuntu === car_watt [n=cwatson@163.178.20.32] has joined #ubuntu === Urilockz just went pure ubuntu === tatters [n=test@ACD46DA4.ipt.aol.com] has joined #ubuntu === roubaix [n=michael@N043P007.adsl.highway.telekom.at] has joined #ubuntu === dgjones [n=Cheshire@unaffiliated/dgjones] has joined #ubuntu [06:47] markelhas, go to crucial.com and use the wizard to find out what memory your need [06:47] amias, i can only acess to expansion bay [06:47] i have a problem here,when i try to watch a movie i can only hear the sound and i can only see a black screen flashing [06:47] amias ok [06:47] sounds like a RAM problem [06:47] I could be mistaken [06:47] esperegu: I'm just trying to help here... but apparently it's solved here: http://forums.debian.net/viewtopic.php?p=38942#38942 (Not too sure though) [06:48] E: Couldn't find package xchat [06:48] is the video driver is right for player? [06:48] Aminux, try to disable desktop effects === james_ [n=james@cpc3-bolt6-0-0-cust407.manc.cable.ntl.com] has joined #ubuntu [06:48] sudo apt-get update? [06:48] thanks amias! [06:48] Aminux, sounds like your screen is trying to use a resolution that is higher that it can use in fullscreen mode , check the resolution of your movie [06:48] Hey guys, could you help emd install drivers to my soundcard, it a soundblaster live 5.1 [06:48] which movie player you are choice? [06:48] Ray_at_UW: I know. u help is appreaciated! [06:48] dolog look for the package in synaptic [06:48] I have three extra buttons on my mouse (in addition to left, right, and middle). I'm trying to figure out which button in CompizFusion corresponds to which button on my mouse... anyone know how I can figure this out? [06:48] dolog there is a gtk and gnome version === a[2121] e [n=a2121e@18.97.95.219.trm01-home.tm.net.my] has joined #ubuntu [06:48] soederqvist, it should just work , mine did === Scunizi [n=Scunizi@ip72-197-240-36.sd.sd.cox.net] has joined #ubuntu === garcon819 [i=garcon81@128.118.112.171] has joined #Ubuntu [06:48] ikonia: am useing gnome [06:48] amias hmm === SKiZzO87 [n=mauro@d83-184-143-112.cust.tele2.it] has joined #ubuntu === SKiZzO87 [n=mauro@d83-184-143-112.cust.tele2.it] has left #ubuntu [] === thekorn [n=thekorn@a89-182-10-81.net-htp.de] has joined #ubuntu === erosa [n=soulnet@85.136.138.9.dyn.user.ono.com] has joined #ubuntu [06:49] darlok: I guess it's just trial and error unless someone else has been in the same position [06:49] one question How, I see the file of comman of all the users in the server [06:49] soederqvist, it should use the emu10k1 module === _Arcad3 is now known as Arcad3 === sssSCH [n=ssssch@77.116.77.227] has joined #ubuntu [06:49] dolog that doesn't matter, you can use either gnome or gtk intergration === half is now known as hechu [06:49] Urilockz: Yeah, I tried trial and error.... now I just don't think Linux KNOWS about the extra buttons ;) [06:49] oh. === Davy_Jones [n=ad@87.109.217.105] has left #ubuntu [] [06:50] darlok, you will probably need to sepcify them in your /etc/X11/xorg.conf === joakim- [n=joakim@s5591c04b.adsl.wanadoo.nl] has joined #ubuntu [06:50] I want to upgrade my 2 desktops and 1 laptop from from feisty to gutsy, if I upgrade 1 machine is there anyway to upgrade the rest with the new packages previously downloaded on first machine === FrancoGG_ is now known as FrancoGG === gary4gar [n=gary4gar@59.95.167.223] has joined #ubuntu === nuup [n=woj@chello087206243025.chello.pl] has joined #ubuntu [06:50] amias: Yeah, I guess that would make sense. I'll live without them, I suppose.... no sense screwing up my system to use a few buttons I never needed before ;) [06:50] darlok, just back up the file before your edit and you will be fine === sjoeboo [n=sjoeboo@140.247.105.37] has joined #ubuntu === nuup [n=woj@chello087206243025.chello.pl] has joined #ubuntu === PatMan_ [n=patman@d54C408F1.access.telenet.be] has joined #ubuntu [06:51] amias: No, I know to do that. I just wouldn't have any clue how to specify new buttons in there... so I'd rather not try ;) [06:51] Ray_at_UW: hmm. that looks like another error. But it was not really solved there === duns_s [n=duns_s@mnhm-590c3d92.pool.einsundeins.de] has joined #ubuntu === EldonB46 [n=eldonb@dpc674739114.direcpc.com] has left #ubuntu [] === sjoeboo [n=sjoeboo@140.247.105.37] has joined #ubuntu [06:51] esperegu: Hey, this seems to be it. The code put up looks almost exactly like your pastebin: https://launchpad.net/ubuntu/+source/hotkey-setup/+bug/88105 === GyrosGeier [n=richter@2001:6f8:137b:0:211:d8ff:fe1c:3e23] has joined #ubuntu [06:51] hi === ShinSR71 [n=mb@82.101.254.223] has joined #ubuntu [06:52] as far as I've understood, hardy has been forked? === sjoeboo [n=sjoeboo@140.247.105.37] has joined #ubuntu [06:52] !offtopic | GyrosGeier [06:52] GyrosGeier: #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome! === Incandenzian [n=Incanden@cpe-66-61-165-41.indy.res.rr.com] has joined #ubuntu [06:52] mmmkay [06:53] this is weird === teste_tux [n=Enock@ftp.edesenv.com.br] has joined #ubuntu [06:53] tatters : the update manager has a bug that prevents it from working , you might have to do it manually [06:53] GyrosGeier, heh, some people are tards [06:53] Hi everyone === vijaymateti [n=vijaymat@122.169.137.191] has joined #ubuntu === jetlaw is now known as jetscreamer [06:53] i have turned off the desktop effects but still no movie picture [06:53] tatters, you could always copy the contents of /var/cache/apt/archives/ === AndyM_ [n=amorris@cmarfw01.marlow.spinvox.com] has joined #ubuntu [06:54] Aminux, try vlc instead === ward_ [n=ward@103.53-67-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu [06:54] Aminux, or try a different video driver for your movie player === cox377 [n=cox@host-84-9-75-145.bulldogdsl.com] has joined #ubuntu [06:54] anyone here knows how to use a keyboard make two diferent actions? or how to say in a script to sheel recognize the keyboard input like make a ctrl +c copy and start a little scrippt [06:54] what size would I be looking at to host a local mirror of packages === tim__ [n=tim@scylla.phys.psu.edu] has left #ubuntu ["Ex-Chat"] [06:54] Aminux, I haven't been following the full conversation, but have you installed all the video codecs? It sounds like maybe you havent. [06:54] dyrne, remember me? (i asked advice yesterday for my friends P1 150Mhz) [06:55] amias: i have tried diferent video players [06:55] does anyone know off the top of their head the command to make a file executable? === Bixon [n=bixon@ajs188.internetdsl.tpnet.pl] has joined #ubuntu [06:55] cox377 chmod 7xxx [06:55] or #=x [06:55] +x [06:55] cox377, chmod u+x file [06:55] Animux: In particular, have you installed the win32codecs? [06:55] amias, i've check the site and the 512 mems that i have are compatible with my laptop. === Saenger [n=saenger@dyndsl-080-228-189-144.ewe-ip-backbone.de] has joined #ubuntu [06:55] cheers guys === gutts_ [i=gutts@ADijon-258-1-140-90.w90-26.abo.wanadoo.fr] has joined #ubuntu === venom_ [n=venom@host29-239-dynamic.11-87-r.retail.telecomitalia.it] has joined #ubuntu === boubbin [i=boubbin@80-248-247-190.cust.suomicom.fi] has joined #ubuntu === Moniker42_ [n=seanande@87-194-119-253.bethere.co.uk] has joined #ubuntu [06:56] elzbal: it was after i installed beryl that i started having this problem === subzero2000 [n=subzero2@c-69-245-21-249.hsd1.tn.comcast.net] has joined #ubuntu [06:56] elzbal:i have the codecs === Linux-Daemon [n=matt-dae@91.106.41.99] has joined #ubuntu === Davy_Jones [n=ad@87.109.217.105] has joined #ubuntu === tommi_ [n=tommi@e212-54-14-244.elisa-laajakaista.fi] has joined #ubuntu [06:57] hey, i put a new graphics card in, ubuntu worked as before - then i rebooted and now X won't start [06:57] #piracy > Davy_Jones [06:57] amias, i'm totally blackout with this mem problem. [06:57] !piracy > Davy_Jones === iggyboy [n=iggyboy@200.184.95.219.jb01-home.tm.net.my] has joined #ubuntu === claudiu_ [n=claudiu@81.181.116.197] has joined #ubuntu === jurica [n=jurica@5-245.dsl.iskon.hr] has joined #ubuntu [06:57] Moniker42_, you will need to reconfigure it to use the new card [06:58] Moniker42_: you need a dpkg-reconfigure [06:58] amias: okay how do i do that? [06:58] have you ever tried dpkg-reocnfigure xserver-xorg [06:58] what is it? dpkg-reconfigure xserver-xorg [06:58] heh, yeah === Neoxygen [n=neoxygen@84-74-168-79.dclient.hispeed.ch] has joined #ubuntu === vijaymateti [n=vijaymat@122.169.137.191] has left #ubuntu [] [06:58] almost in the same time === Julius [n=phil@235.32-242-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [06:58] k, i'll try that === Julius [n=phil@235.32-242-81.adsl-dyn.isp.belgacom.be] has left #ubuntu ["Quitte"] [06:58] neverblue, hi, can u please try to help! [06:59] pardon ? [06:59] markelhas: just to get this straight, you've got a memory problem when you run 512mb of ram, but not 256 [06:59] neverblue, about my mem problem :P [06:59] and the problem is only in ubuntu - not windows or memtest [06:59] amias, So if I copied or made available /var/cache/apt/archives/ as a share on my lan, I could set the other machines to use that as my source for updates [06:59] markelhas, what is your question ? [06:59] Moniker42_: Be prepared to know what settings your card and monitor can do, as well as what kind of mouse etc you have. The reconfigure will go through all this stuff [06:59] ikonia, yap, right now i'm using the 256 m form a friend and everything ok [07:00] neverblue, :| [07:00] markelhas and if you use 512 with say windows - thats not a problem, it works well [07:00] tatters, yep , although it will need to be writeable and have its userid/name mapping in sync [07:00] where it goes again. i've a asus m3n with 1 gb of mem, when i try to boot ubutun the system is very very very slow, slower than the livecd. I've made the memtest and no errors found. I've tested a different 512 mem and same problem. Later i've put a 256 mem and it works just fine. What can i do to use 1g mem in my ubuntu? === ToolBust [n=ToolBust@241-43.dial.nortenet.pt] has joined #ubuntu [07:00] markelhas could you define "slow" is it slow at bootup, slow in general use etc etc [07:00] ikonia, in windows evereything just ok with 512 === Gener1c is now known as Lamer === marko_ [n=marko@62.162.233.24] has joined #ubuntu [07:00] can any body tell me what is the path to the modules? [07:00] markelhas, seems you have lots of help, why are you directing questions to me ? [07:01] people someone knows how to declare a keyboard button on a shell script? === bruenig [n=bruenig@ip-129-15-131-246.fescfwsm.ou.edu] has joined #ubuntu [07:01] ikonia, os takes 12-15 mins to boot, and when it does if i try to open terminal for example takes toooooooooo long and the cpu jump to 100% [07:01] system becoming slow with more memory smells of cache controller being unable to handle that much memory [07:01] markelhas what version of ubuntu is this ? [07:01] neverblue, cause u give me some tips then stop , just that. === Lamer is now known as Wire === jaw [n=jaw@203.200.201.49] has joined #ubuntu [07:01] 7.04 === stiev3 [n=steve@ip24-253-156-128.hr.hr.cox.net] has joined #ubuntu === Er_39 [n=jars@dslb-088-076-210-188.pools.arcor-ip.net] has joined #ubuntu [07:01] amias, thnx, ill give it a shot seems pretty straight forward [07:02] ikonia, 7.04 === Wire is now known as Wireless [07:02] markelhas: and that runs fine with 256 ? [07:02] I have a box like that too, only that it's a 486 with 64 MB of RAM, and only 48 supported by the cache controller [07:02] Ray_at_UW: That seems to have fixed the problem. Wonder why I did not see that page before. Thanks for you help mate! === ingsoc [n=ingsoc@203.200.201.52] has joined #ubuntu === cookie-102 [n=cookie@66-224-120-210.atgi.net] has joined #ubuntu [07:02] hi, how do I write a script that starts up a program every time the computer starts up? is this something with /etc/init.d? [07:02] esperegu: Glad I could help. :) === Wireless is now known as Aerodynamic [07:02] jaw spot on === wetware1967 [n=peter@fl-65-40-37-166.sta.embarqhsd.net] has joined #ubuntu [07:02] can any body tell me what is the path to the modules? [07:02] markelhas, i am currently working, if you have something specific you need to ask me, then please, go ahead, but as for messaging, ill have to ask you to stop, thanks [07:02] markelhas, try booting it with 512MB of RAM inserted, and mem=256M kernel option === Pelo [n=jean@mtl-pppoe-adsl889.securenet.net] has joined #ubuntu [07:02] ToolBust which modules [07:02] fatal server error: no screens found [07:02] ikonia, it last updates, yes but this mem isn't mine i only have 2 512m that don't work, but the memtest passed === Aerodynamic is now known as plazmatic [07:03] the file ended in .ko [07:03] neverblue, ok === MasterChowl [n=masterch@200.29.100.38] has joined #ubuntu [07:03] markelhas, if that runs at normal speed, it is most likely that your mainboard chipset cannot handle that much memory [07:03] ToolBust the kernel objects [07:03] ikonia, now isn't it important to run it as a different user? I don't want to just /blah/blah/bin/script because it'll run as root? right? [07:03] yes === plazmatic is now known as Cantenna [07:03] what is avahi good for ? my internet connection is a very basic dsl with a bridge model , using pppoe , so I need avahi ? [07:03] jaw: init scripts will be executed as root [07:03] GyrosGeier, i can try that by editing boot option right!? === bighil [n=hilbig@dslb-084-061-174-255.pools.arcor-ip.net] has joined #ubuntu [07:03] markelhas what type of machine is this ? [07:04] ikonia, in redhat they have something called runuser which seems to change the user it runs as, do we have something like that in ubuntu? [07:04] GyrosGeier, says that can 1G and in windows was working with 1G [07:04] markelhas, yes; you can do that at the boot prompt, no need to edit files [07:04] ikonia can you tell me where they are? [07:04] laptop asus m3n 1.6 ghz === Cantenna is now known as gener2c [07:04] jaw not quite, keep in mind the script gets executed as root - but inside that script you can change user === mylogic [n=matt@mylogic.net] has joined #ubuntu [07:04] ToolBust /lib/modules/$kernel/version [07:04] oops === Howitzer [n=sagara@37.212-64-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu [07:04] ToolBust /lib/modules/$kernel_version [07:04] markelhas, I think Windows could use the extra memory as swapspace rather than "real" memory [07:04] ikonia, so su -u to switch users? === fredddy [n=freddy@p3E9E0892.dip0.t-ipconnect.de] has joined #ubuntu [07:04] i've found this http://gentoo-wiki.com/FAQ_Linux_Memory_Management#The_mysterious_880_MB_limit_on_x86 [07:04] ikonia thanks [07:04] who is the owner of this channel? [07:05] jaw su -$user will [07:05] this would mean you do not notice the slowdown [07:05] cookie-102 ubuntu [07:05] ok === gener2c is now known as Generic === dori [n=dori@wikipedia/Dori] has joined #ubuntu === albert23 [n=albert@86.81.99.204] has joined #ubuntu [07:05] GyrosGeier, ikonia i've found this http://gentoo-wiki.com/FAQ_Linux_Memory_Management#The_mysterious_880_MB_limit_on_x86 [07:05] Simple question i suspect, I cant get the run command prompt to show with ALT + F2. using Keyboard preferences -> layouts -> Sweden [07:05] jaw it depends what you want to do, as there are many options === Generic is now known as gener2c [07:05] is this a realoty in ubuntu!? === [nitro] [n=nitro@89.142.154.32] has joined #ubuntu === gener2c is now known as Gener2c [07:06] *reality [07:06] markelhas, I think most kernels these days have HIGHMEM enabled [07:06] markelhas: just having a read, I've never heard of an 880 limit === sonium_ [n=sonium@p5492800D.dip0.t-ipconnect.de] has joined #ubuntu [07:06] ok [07:06] ahhh the highmem limit === Venko [n=sol@colchester-lug/member/Venko] has joined #ubuntu === DenysLins [n=denys@189.13.234.224] has joined #ubuntu [07:06] and it wouldn't be a problem with 512MB [07:06] markelhas, my memory is 968 meg and linux recognises it [07:06] as I said, try once with all the memory installed, but telling Linux to only use part of it === MOTZ [n=riefler@83-215-155-58.hage.dyn.salzburg-online.at] has joined #ubuntu [07:06] GyrosGeier, but the laptop has 512m based and one expansion bay [07:06] markelhas: It's a reality, sure... But the Ubuntu default kernel probably has highmem support [07:06] ikonia can you tell me where is the file that I can put a list of modules so the pc can load them at the boot [07:07] ikonia, thanks, I'm trying to port this RedHat script over to ubuntu. http://studios.thoughtworks.com/discussion/forums/4/topics/271 [07:07] markelhas, that won't slow it down , it will just not use all of it [07:07] markelhas, so 512M is fine? [07:07] markelhas how can it have 512 based - yet your using 256 [07:07] hawk, ok [07:07] how can i change die passwort what ubuntu asks for changing system? [07:07] or even turn off === MMendelson [n=michael@ool-18bc6ab2.dyn.optonline.net] has joined #ubuntu [07:07] ToolBust depends what you want to use, modules should be loaded automaticlly [07:07] GyrosGeier, nop, with the 256 extra ok, but this extra 256 aren't mine [07:07] MOTZ, System->Preferences->AboutMe === Er_39 [n=jars@dslb-088-076-210-188.pools.arcor-ip.net] has joined #ubuntu [07:08] if I put a new sound module it loads automaticaly when I reboot? [07:08] markelhas, ah, so 768 works, 1G doesn't [07:08] jaw: just reading === Fri13 [n=paristo@bb-62-165-186-90.dsl.phnet.fi] has joined #ubuntu [07:08] ikonia, i'm using 256 in the expansion bay === MMendelson [n=michael@ool-18bc6ab2.dyn.optonline.net] has left #ubuntu ["Ex-Chat"] [07:08] GyrosGeier, yes [07:08] ikonia if I put a new sound module it loads automaticaly when I reboot? [07:08] markelhas, i think you should file a bug report at launchpad.net [07:08] markelhas: thats totally different to what you said before === crazysoilder [n=crazysoi@85.102.238.72] has joined #ubuntu [07:08] markelhas, that could indeed be HIGHMEM then, or cache [07:08] sec [07:08] ToolBust depends, is the "new" module not part of the kernel === fletch_ [n=fletch@dsl081-247-015.sfo1.dsl.speakeasy.net] has joined #ubuntu [07:08] ikonia, sorry but my English is not the best === gnuskool [n=chatzill@82.99.36.199] has joined #ubuntu === kleftisx [n=kleftisx@213-178-111.netrunf.cytanet.com.cy] has joined #ubuntu [07:08] GyrosGeier can't see it being the old highmem limit, thats long dead === animimotus [n=animimot@unaffiliated/animimotus] has joined #ubuntu === claudiu [n=claudiu@81.181.116.197] has joined #ubuntu [07:09] markelhas not a problem === kleftisx_ [n=kleftisx@213-178-111.netrunf.cytanet.com.cy] has joined #ubuntu === crazysoilder [n=crazysoi@85.102.238.72] has left #ubuntu ["Leaving"] [07:09] GyrosGeier your test is the based way - just put all the ram in and do "mem=512" [07:09] at boot time === kleftisx [n=kleftisx@213-178-111.netrunf.cytanet.com.cy] has joined #ubuntu === Nem [n=nem@206.190.145.2] has joined #ubuntu [07:09] not the user pass i would like to disable the pw he asks when i change system things === Laggyware [n=Latty@host86-132-245-225.range86-132.btcentralplus.com] has joined #ubuntu [07:10] that somethinh like user control in vista ;) === Er_39 [n=jars@dslb-088-076-210-188.pools.arcor-ip.net] has joined #ubuntu [07:10] ikonia, that way it only use the based mem right!? [07:10] jaw: that looks fine to port - you /may/ want to check out "su -c" [07:10] markelhas yes [07:10] ikonia, from what I've gathered, the problem appears between 768M and 1G === boogie [n=boogie@p548A2C1C.dip0.t-ipconnect.de] has joined #ubuntu [07:10] ikonia, ok then i'll try that [07:10] hello can anyone knows how to install ubuntu studio on feisty fawn 7.04 64bit ?? [07:10] GyrosGeier, yap it's true [07:10] GyrosGeier yup, so if he has 1 gig in, but config's only 512 he should be fine in theory [07:10] MOTZ: there is a way to do it but you will remove lots of very usefull security [07:11] kleftisx use synaptic === syntaxx [n=patrick@unaffiliated/syntaxx] has joined #ubuntu [07:11] ok [07:11] kleftisx however its better to use the actual ubuntustudio distro [07:11] ill forget it ;) [07:11] hello is there a way i could show the print history in windows client when using cups? as i encountered it doesnt show the print history on windows client when i tried to print [07:11] ikonia, so the idea would be to test 800M next; if that slows down, it is most likely the cache controller not handling anything above 768M === MOTZ [n=riefler@83-215-155-58.hage.dyn.salzburg-online.at] has left #ubuntu [] === magnetik [n=magnetik@ABordeaux-152-1-35-174.w83-193.abo.wanadoo.fr] has joined #ubuntu [07:11] GyrosGeier exactly [07:11] Hello === plopo [n=phillip@host217-36-227-147.in-addr.btopenworld.com] has joined #ubuntu === Till [n=megatill@p4FD665CE.dip.t-dialin.net] has joined #ubuntu [07:11] ikonia, if it doesn't, probably HIGHMEM; next test would be 900M then [07:11] ikonia : i cant use it as a program in ubuntu? is like another os? :O === Till [n=megatill@p4FD665CE.dip.t-dialin.net] has left #ubuntu ["Ex-Chat"] === Wanderer_ is now known as Wanderer === a4k7 [n=halim@M409P000.adsl.highway.telekom.at] has joined #ubuntu === TylerJGillies [n=tyler@cpe-66-91-11-212.hawaii.res.rr.com] has joined #ubuntu [07:12] ikonia, thanks -- i'll need to find the alternative for chkconfigadd mingled as well [07:12] whee [07:12] kleftisx not its a collection of programs, but the ubuntu studio packaging is geared towards the ubutnu studio distro [07:12] GyrosGeier, but how would that make it slower than it was with 512MB ? [07:12] GyrosGeier: highmen limit was bumped up by kernel devs because most of the people have at least 1024 anyways? to 1100 or something like that? === fletch_ is now known as dfletcher [07:12] GyrosGeier, can i force to use the HIGHMEM ? [07:12] jaw thats a simple if / else statment === claudiu [n=claudiu@81.181.116.197] has joined #ubuntu [07:12] ikonia I think not...I'm taking a module from an other distribution....because my sound works on my actual distribution but not the jack connectors and on the other distribution it works....can I take the modules from the other distribution to my actual? === MMendelson [n=michael@ool-18bc6ab2.dyn.optonline.net] has joined #ubuntu === Lamego [n=lamego@a81-84-231-49.cpe.netcabo.pt] has joined #ubuntu [07:12] markelhas, that's a kernel config option that is most likely set (so it's unlikely that this is your problem) [07:12] ToolBust you can't drop modules in from other distros [07:13] why not [07:13] GyrosGeier, ok [07:13] ToolBust: because they are built against a different OS === ubuntu [n=ubuntu@195.110.151.2] has joined #ubuntu === drmartins [n=drmartin@213.252.103.3] has joined #ubuntu [07:13] amias, some cache controllers have a hard limit on the largest physical addresses they handle === plopo [n=phillip@host217-36-227-147.in-addr.btopenworld.com] has left #ubuntu ["Ex-Chat"] [07:13] amias, if you access memory beyond that, you lose CPU caches. And that hurts. A lot. [07:14] so if i boot with mem=880it should work just fine!? [07:14] I'm using big linux 3 and I whant to take the modules from big linux 4 [07:14] ikonia: How I CAN GET EX_CHAT FOR UBUNTU ? [07:14] ikonia I'm using big linux 3 and I whant to take the modules from big linux 4 [07:14] Anlar, there are three settings IIRC, no highmem, small highmem and large highmem [07:14] GyrosGeier: HIGHMEM is set on all ubuntu kernels [07:14] markelhas, I'd try 800 and 900 [07:14] dolog apt-get install xchat [07:14] dolog please don't shout [07:14] oh [07:14] ok see u soon [07:14] dolog, you mean 'xchat' ? === Lattyware [n=Latty@host86-137-132-195.range86-137.btcentralplus.com] has joined #ubuntu [07:14] markelhas, exactly 880 won't tell much [07:14] dolog: open add-remove programs and search for xchat [07:14] !info xchat [07:14] xchat: IRC client for X similar to AmIRC. In component universe, is optional. Version 2.8.0-0ubuntu4 (feisty), package size 295 kB, installed size 796 kB === IntuitiveNipple [n=TJ@alexandros.tjworld.net] has joined #ubuntu [07:15] heh === freddd1 [n=freddy@p3E9E4719.dip0.t-ipconnect.de] has joined #ubuntu [07:15] as if anyone in here would know AmIRC? [07:15] ikonia I'm using big linux 3 and I whant to take the modules from big linux 4....aren't thode distros made on the same kernel? [07:15] dolog I've told you 3 or 4 times, use apt-cache or syaptic to find the right package [07:15] ikonia I'm using big linux 3 and I whant to take the modules from big linux 4....aren't those distros made on the same kernel? === stefg [n=stefg@e179145199.adsl.alicedsl.de] has joined #ubuntu === jmonk82 [n=jmonk82@209.167.8.2] has joined #ubuntu === Gener2c [n=Generic@DSL217-132-218-172.bb.netvision.net.il] has joined #ubuntu [07:15] ToolBust, i wouldent rely on doing it that way. [07:15] amias, excellent; so I'll assume that is not the problem then. [07:16] ToolBust no === se-agapo [n=gmenelau@cpe-102758.ip.primehome.com] has joined #ubuntu [07:16] Bah Frogzoo left. Just went and checked on that box with ppp/eth0 dns issue. His suggestion for dhclient.conf alteration for domain-name-servers didn't take [07:16] ToolBust and neither is ubuntu [07:16] how can I run the contents of www.kalonline.com on ubuntu [07:16] When my computer is on batterie, the screen become so dark ; How to get ride of this problem ? [07:16] dolog: Applications -> Add/Remove and choose xchat from the internet section === gener1c [n=Generic@DSL217-132-218-172.bb.netvision.net.il] has joined #ubuntu === jmonk82 [n=jmonk82@209.167.8.2] has left #ubuntu ["Leaving"] [07:16] Dr_willis then what can I do?? I can't find the driver that can make jack connectors work... [07:16] magnetik, plug it in , its saving power [07:16] magnetik, on my laptop i hit the brightness controll keys a few times to brighten it up.. === plopo [n=jouma@host217-36-227-147.in-addr.btopenworld.com] has joined #ubuntu === nicks [n=nicks@81-234-174-79-no95.tbcn.telia.com] has joined #ubuntu [07:17] amias, its sometimes usefull for short time === b0c1 [n=boci@gw.boci.ammnet.hu] has joined #ubuntu [07:17] Dr_willis, i've tried all the Fn* keys.. and nothing [07:17] can somebody pls tell me what do I need to run the images on www.kalonline.com [07:17] ToolBust, no idea. I havent seen your whole problem.. and i dont mess with sound cards much. Just moving one Module from some disrto to another is NOT a good idea. [07:17] i tried dpkg-reconfigure xserver-xorg and it still isn't working =( [07:17] it is like a flash image === syntaxx [n=patrick@unaffiliated/syntaxx] has left #ubuntu [] === shriphani [n=shriphan@219.91.188.167] has joined #ubuntu [07:17] i was using an agp card, now it's pci-e, is there something i need to reconfigure for that to work now? [07:17] magnetik, yep. seen it work on some laptops and not on others. Id do a google for your specific laptop/vide4o card and see if theres some xorg.conf tweaks. or ways to get the keys working. [07:17] somebody pls help [07:17] hum ok === DrPppr242 [n=paul@ip72-201-7-229.ph.ph.cox.net] has joined #ubuntu [07:18] magnetik, its different for differenet laptops , what type is yours ? [07:18] Its a Samsung Q35 [07:18] cookie-102: are you running the 64bit edition of ubuntu? === galaxy_ [n=galaxy@88.87.9.45] has joined #ubuntu [07:18] I found nothing particular for ubuntu.. except tweaks for sound [07:18] magnetik, right so google for 'Samsung Q35 brightness control' [07:18] Please help me [07:18] !please [07:18] galaxy_, no [07:18] Avoid your questions being followed by a trail of "Please, help me", "Can nobody help me?", "I really need this!", and so on. This just contributes to making the channel unreadable. If you are not answered, ask again later; but see also !repeat and !patience [07:19] !faq [07:19] A list of common questions and answers about Ubuntu: http://help.ubuntu.com/community/CommonQuestions - Official documentation: http://help.ubuntu.com - IRC FAQ: http://wiki.ubuntu.com/IRCResourcePage [07:19] !traffic [07:19] NOTICE - There is a lot of traffic in this channel at the moment. Please try to keep your sentences into a single message, avoid repeating the same question multiple times, use http://paste.ubuntu-nl.org for pasting, remember to mention the nickname of the person you're addressing, and join #ubuntu-offtopic for anything that is not Ubuntu support. Thank you for understanding! [07:19] amias, NVidia nForce2 with CMI9761A+ at 0xe4001000, irq 1 driver download plz [07:20] galaxy_, grammer confusing , message garbled , user confused [07:20] !repeat [07:20] Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. You can search https://help.ubuntu.com or http://wiki.ubuntu.com while you wait. Also see !patience [07:20] !coc [07:20] The Ubuntu Code of Conduct to which we ask all Ubuntu users to adhere can be found at http://www.ubuntu.com/community/conduct/ === gardar [n=gardar@dsl-212-199.hive.is] has joined #ubuntu === claudiu [n=claudiu@81.181.116.197] has joined #ubuntu [07:20] Its also worth while to be reseraching the ubuntu forums while you wait/chat in here for problems. === tyoc [n=ubuntu@189.181.154.40] has joined #ubuntu === cori[s] [n=cori@pdpc/supporter/active/CoriS] has joined #ubuntu === giggety [i=darklord@2002:4b3b:a382:1337:0:0:0:1] has joined #ubuntu === Kwitschibo_ is now known as Kwitschibo [07:20] So far for the netiquette lesson in the channel... === kousotu [n=kousotu@adsl-68-79-207-137.dsl.emhril.ameritech.net] has joined #Ubuntu [07:21] Hi there people, is there some USB preinstalled with GRUB? === ckin2001 [n=ckin2001@74-136-201-52.dhcp.insightbb.com] has joined #ubuntu [07:21] does ubuntu 7.10 supports tv out? === Nem [n=nem@206.190.145.2] has left #ubuntu ["Leaving"] [07:21] gary4gar, that would be a feature of your video card drivers. [07:21] right i'm frazzled [07:21] one last time for luck - has anyone succesfully upgraded from feisty to gutsy using update-manager ? [07:22] !gutsy | amias [07:22] amias: Gutsy Gibbon is the code name for the next release of Ubuntu (7.10) | (due October 2007) | It is development software, as such unstable, support _only_ in #ubuntu+1 [07:22] how is support for fineger print readers in linux? === shriphani [n=shriphan@219.91.188.167] has joined #ubuntu === riny_ [n=riny@cc844757-b.deven1.ov.home.nl] has joined #ubuntu === Hc\\ [n=toffe@a88-112-4-210.elisa-laajakaista.fi] has joined #ubuntu [07:23] stefg, and what system is it thats not working at the moment and preventing my upgrade ? i'll give you a clue it begins with an F [07:23] oops! fingerprint reader i mean === ticked [n=tkd@bas4-stcatharines10-1279408364.dsl.bell.ca] has joined #ubuntu === Paddy_EIRE [n=patrick@84.13.126.88] has joined #ubuntu [07:23] hey again, told ya your gonna see alot of me [07:23] amias, i don't think update-manager will let you upgrade just yet...you need to wait till gutsy is an official release before trying that way to my knowledge [07:23] gary4gar, best bet would be to google the forums for that topic and your specific brand finger print reader. I get the feeling most people 'in the know' consider them useless. :) [07:23] amias, pi6ko kaji [07:23] GDM won't start, i've tried dpkg-reconfigure xserver-xorg but it hasn't helped === SoulChild [n=eshat@dslb-084-060-008-112.pools.arcor-ip.net] has joined #ubuntu [07:23] with yet another newbie question [07:23] amias: no, Gutsy upgrade failed miserably on my (heavily tweaked) Feisty install. But no wonder, it's alpha, and my feisty is non-standard [07:24] bluefox83, no , there is a bug in the update manager where it miscalcuates the disk space it needs [07:24] hey guys [07:24] I wnet from blleding edge to over the edge yesterday back with feisty for now === G3R [n=germanp@53-148-235-201.fibertel.com.ar] has joined #ubuntu [07:24] Dr_willis: can direct me to some good updated HCL? === ubu [n=ubu@host-85-27-16-225.brutele.be] has joined #ubuntu [07:24] please help for driver sound c-media [07:24] amias, bummer === pochomon [n=ubuntu@190.40.137.114] has joined #ubuntu [07:24] please help for driver sound c-media 5.1 === pochomon_ [n=ubuntu@190.40.137.114] has joined #ubuntu === rockets [n=rockets@olwalcsfw01.ipnetzone.net] has joined #ubuntu [07:25] gary4gar, not really. the ubuntu forums have a lot of good info. would be the place to start. Cutting edge hardware is always an issue. [07:25] !sound | galaxy === sam_kris [n=user@203.222.198.50] has joined #ubuntu [07:25] this rocks --> http://ophcrack.sourceforge.net/ <-- [07:25] galaxy: If you're having problems with sound, first ensure ALSA is selected, by double clicking on the volume control, then File -> Change Device (ALSA Mixer). If that fails, see https://help.ubuntu.com/community/Sound - https://help.ubuntu.com/community/SoundTroubleshooting - http://alsa.opensrc.org/index.php?page=DmixPlugin - For playing audio files, see !Players and !MP3 === atrocious [n=atrociou@83-52-100.netrun.cytanet.com.cy] has joined #ubuntu === Ez-Toni [n=antonio@cvl92-2-82-228-145-127.fbx.proxad.net] has joined #ubuntu === ozzloy_ is now known as ozzloy === qazibasit [n=qazibasi@116.71.10.192] has joined #ubuntu [07:26] stefg: no === pochomon_ is now known as pochomon === Ken [n=super@cF0CF47C1.dhcp.bluecom.no] has joined #ubuntu === pochomon [n=ubuntu@190.40.137.114] has left #ubuntu ["Ex-Chat"] [07:26] stefg: I am running 32-bit 7.04 === qazibasit [n=qazibasi@116.71.10.192] has left #ubuntu ["Ex-Chat"] === Nightwalker- [n=omena@a88-114-35-60.elisa-laajakaista.fi] has joined #ubuntu [07:26] !flash | cookie-102 [07:26] i have ubuntu 7.04 for 64bit AMD and am trying to get adobe flash player 9 in mozilla and i can not get the sucker to install === claudiu [n=claudiu@81.181.116.197] has joined #ubuntu [07:26] cookie-102: To install Flash see https://help.ubuntu.com/community/RestrictedFormats/Flash - Flash 9 is now available in dapper-backports and edgy-backports - See also !Restricted and !Gnash === sam_kris [n=user@203.222.198.51] has joined #ubuntu [07:26] !flash64 | ticked [07:26] ticked: You can run Flash, Real, and Java plugins in AMD64 bit computers with Firefox. see the steps to follow at https://help.ubuntu.com/community/FirefoxAMD64FlashJava [07:26] hmmm i just compiled my first kernel but after the root device has been mounted i get a kernel panic. is there a site which describes the main features, that need to be activated in menuconfig ??? [07:27] ticked, I do belive it can be a bit of a hassle.. one reason a lot of people avoide 64bit [07:27] hen you do a clean install ,is there way to check if it was fully successful much the same way you can do a CD check before installtion? [07:27] thanks checking the link now [07:27] please help for driver sound c-media 5.1 [07:27] !kernel [07:27] kernel is the core of the Ubuntu Operating System (named 'Linux') - see https://help.ubuntu.com/community/Kernel. You shouldn't have to compile one, but if you're convinced you do, see https://wiki.ubuntu.com/KernelCustomBuild [07:27] SoulChild, you probably need to rdev it [07:27] SoulChild, i agree with amias === private_guy [n=private_@212.35.74.87] has joined #ubuntu [07:27] Hi there everyone === bubard_ [n=bubard@86.66.211.223] has joined #ubuntu [07:27] I just installed ubuntu [07:27] and its not booting [07:27] how come? :( [07:27] It just loads windowsd === AngryElf [n=jsharpe@ip24-255-126-187.dc.dc.cox.net] has joined #ubuntu === ubnuut [n=kaufela@dsl-245-87-121.telkomadsl.co.za] has joined #ubuntu [07:27] *windows === mEck0 [n=meck0@h93n9c1o1039.bredband.skanova.com] has joined #ubuntu [07:28] amias: what is rdev ? === fredddy [n=freddy@p3E9E4719.dip0.t-ipconnect.de] has joined #ubuntu [07:28] private_guy, grub is not installed [07:28] how do I su to www-data for testing purposes... it's prompting for a password? [07:28] Whats Grub [07:28] and how do I install it [07:28] SoulChild: of course there is no general guide ... that completly depends on what hardware you have. If it wouldn't differ from box to box, it wouldn't be an option, but a builtin [07:28] private_guy, given the VERBOSE description you gave - we have no idea. Do you even see a 'menu' to pick the os to boot? === ScottLij [n=scott@24-180-196-49.dhcp.aldl.mi.charter.com] has joined #ubuntu [07:28] SoulChild, i can see a google search in your near future === Ballena is now known as Ballena|away [07:28] !enter [07:28] Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation! === sam_kris [n=user@203.222.198.54] has joined #ubuntu [07:28] No [07:28] It just boots to windows [07:28] No boot to ubunutu :( [07:28] *ubuntu [07:28] amias :D [07:28] private_guy, what is your hard drive layout? theres no need to spam across several lines... keep it on one line. [07:29] Samsung [07:29] private_guy, grub is a bootloader , it lets you choose ubuntu or windows at startup === gary4gar [n=gary4gar@59.95.167.223] has left #ubuntu [] === john [n=johnsie@cpc3-bele3-0-0-cust500.belf.cable.ntl.com] has joined #ubuntu === d3ck4_ [n=d3ck4@58.213.116.130] has joined #ubuntu === freerise [i=1000@dialup-4.238.228.37.Dial1.Philadelphia1.Level3.net] has joined #ubuntu === phaero [n=phaero@90-227-6-166-no15.tbcn.telia.com] has joined #ubuntu [07:29] *But before on ubuntu 6, it used to boot without any software or program needed === freerise [i=1000@dialup-4.238.228.37.Dial1.Philadelphia1.Level3.net] has left #ubuntu [] [07:29] hi, is it normal for my internal hard disk to be detected as sda? [07:29] SoulChild: but you're learning what depends on what in the kernel. You'll need your disk-adapters supported for sure, and the filesystems you're using. Do you have a general understanding of hardware, the boot-process in linux and the initramfs-concept? [07:30] Internal Yes [07:30] private_guy, it was using grub befor most likely. its a good sign that it DID work befor. [07:30] john: yes its the new black [07:30] ok [07:30] thanks === ubnuut [n=kaufela@dsl-245-87-121.telkomadsl.co.za] has left #ubuntu [] [07:30] hi, how to unzip all zip files instead of doing manual command for each zip file like unzip *.zip ?? [07:30] cyberjames, use the wildcards INSIDE Quotes. === Deathminder [n=vito@i5387429C.versanet.de] has joined #ubuntu [07:30] cyberjames, google for 'bash for loop' [07:30] cyberjames, unzip is one of the few progrmas ive seen that work tha tway [07:31] unzip '*.zip' SHOULD work. [07:31] I have also a *problem* with GRUB, it raise when I switch my mother board.... [07:31] okey let me try === sonium_ [n=sonium@p54929B95.dip0.t-ipconnect.de] has joined #ubuntu [07:31] stefg: everything except the initramfs ,... i deactivated and also didn't create it when i compiled my kernel, cause i want to built just the things in, that i need [07:31] Unless of course you got 100000000000000+ zips... then ya hit another issue. :) [07:31] thanks Dr_willis === pc2k7 [n=pc2k7@client-86-27-167-211.popl.adsl.virgin.net] has joined #ubuntu [07:31] !initramfs === helios4 [n=helios@ppp-205-106.33-151.iol.it] has joined #ubuntu [07:31] Sorry, I don't know anything about initramfs - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [07:31] !ntfs-3g [07:32] ntfs-3g is a Linux driver which allows read/write access to NTFS partitions. Installation instructions at https://help.ubuntu.com/community/MountingWindowsPartitions [07:32] !initram [07:32] Sorry, I don't know anything about initram - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [07:32] I have tryied https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows and here is my thread http://ubuntuforums.org/showthread.php?t=543065 [07:32] cyberjames, that dosent work on all programs. :) ive only seen that work for unzip and a few others. === graulich [n=michaels@84.94.49.200.cable.012.net.il] has joined #ubuntu === GPGEEK [n=joe@adsl-76-241-161-65.dsl.sfldmi.sbcglobal.net] has joined #ubuntu === InfiL00p [n=bowserj@S0106000c418bd9f7.vc.shawcable.net] has joined #ubuntu [07:32] how do I share a folder between two Ubuntu machines on one LAN? === Malder [n=Yourmom@cpe-76-175-75-172.socal.res.rr.com] has joined #ubuntu === davidthedrake [n=davidthe@d216-220-25-33.dynip.modwest.com] has joined #ubuntu [07:32] graulich, depends. on what you are sharing, and how you want to do it. [07:33] telequinesis?? :D [07:33] ubotu: initramfs is a special filesystem used when booting up , it contains lots of modules that are needed to start the machine but might have otherwise been unavailable untill the machine was started [07:33] How do I found out which java alternative is currently selected via update-java-alternatives? [07:33] graulich, ive been using the fuse ssh, filesystem tool to let my one user get to his home dir on another machine easially. [07:33] Is there any way to install ubuntu without formatting/wiping out all my config files? [07:33] update-alternatives --list java [07:33] or some like that [07:33] Dr_willis, I wanna make it so I can place files from machine #1 in a folder on machine #2 === soeren21 [n=soeren@Yc049.y.pppool.de] has joined #ubuntu === enviromook [n=enviromo@cpe-72-191-11-71.satx.res.rr.com] has joined #ubuntu [07:33] graulich, if you have several users, you may want to set up some samba shares, if only linux mchines. nfs shares. === svolpe [n=Gerrath_@unaffiliated/gerrath] has joined #ubuntu [07:33] graulich, that description is rather... undescriptive. :) === dkagedal [n=david@77.241.133.139.bredband.tre.se] has joined #ubuntu [07:33] SoulChild: the initramfs is needed for a lot of things, and by no means a waste of resources. I'd suggest first to study the 'from power-up to bash prompt' howto, to get a general understanding. Although it's outdated, it still gives an idea of what's going on [07:34] graulich, many users, 1 user? windows machines? just Linux.. ect.. :) === enviromook [n=enviromo@cpe-72-191-11-71.satx.res.rr.com] has left #ubuntu ["Ex-Chat"] === Gerrath [n=Gerrath_@unaffiliated/gerrath] has joined #ubuntu [07:34] Is there any type of automatic update notification for ubuntu server? [07:34] Dr_willis, two Ubuntu machines, one user each. === silwol [n=silwol@d91-128-236-90.cust.tele2.at] has joined #ubuntu [07:34] graulich, for simple file transfers, ssh and scp (and the fuse ssh stuff) is well worth learning. === BlehBleh [n=jwgreene@auburn-1060.megalink.net] has joined #ubuntu === cookie-102 [n=cookie@66-224-120-210.atgi.net] has left #ubuntu [] [07:34] stefg but do i really need a initramfs ? [07:35] graulich, you need to install ssh on the machines, actually the gnome file manager i THINK has a feature to do that. But i rarely use the gnome file manager. [07:35] how do I reinstall a package? [07:35] rockets, you could run 'apt-get update && apt-get upgrade' in roots cron on a daily basis , but are you realy sure you want it to auto update a server , things might break [07:35] is there any way to install ubuntu without the liveCD mode first? Just go straight to the desktop installation - maybe even command line only? [07:35] graulich, i knwo KDEs file manager has a fish:// thing for ssh file transfering. Not sure if ignome has a similer. [07:35] Malder, see the alternate CDs === tatters [n=test@ACD46DA4.ipt.aol.com] has left #ubuntu [] [07:35] thx Dr_willis but I think I'll just use my usb disk right now... too tired to start learning stuff. [07:35] Dr_willis Oh, so on Ubuntu 7, it doesn't have Grub? === tehk [n=tehk@c-71-59-90-172.hsd1.nj.comcast.net] has joined #ubuntu === biosword [n=biosword@host63-102-dynamic.6-87-r.retail.telecomitalia.it] has joined #ubuntu [07:36] private_guy, it should be using grub as well. [07:36] amias: thx [07:36] SoulChild: if you run usplash: yes. if you don't have /all/ modules needed to acces the root-fs statically built in the kernel: yes. If you want a non-modular, clumsy kernel: no! [07:36] amias, i dont want auto update i want auto update notifications. [07:36] Dr_Wills: nautilus will do some kind of scp/ssh transfers [07:36] graulich, SSH and scp, and fusessh, are worth bookmarking/learning about. :) [07:36] graulich, nfs will do the trick for you. http://ubuntuforums.org/showthread.php?t=249889&highlight=NFS+file+sharing [07:36] My pc reboots after graphical login. Without an installed samba package there is no problem! === snocone [n=Anon@216-67-9-57-cdsl-rb2.cwc.acsalaska.net] has joined #ubuntu [07:36] So howcome ubuntu isn't showing on the boot menu, what did I do wrong Dr_willis === ni1s [n=ni1s@1-1-4-36a.dre.sth.bostream.se] has joined #ubuntu === Pretoriab [n=Pretoria@80-193-44-104.cable.ubr07.enfi.blueyonder.co.uk] has joined #ubuntu === Meltdown [n=luke@86.155.235.56] has joined #ubuntu [07:37] ok i am at https://help.ubuntu.com/community/AMD64/FirefoxAndPlugins?action=show&redirect=FirefoxAMD64FlashJava and it says to type at the terminal tar -zxf firefox-2.0.0.6.tar.gz when i do, no go, so i assume i have to navigate to destop in terminal but i cant seem to do that ....keeps saying no such directory [07:37] private_guy, i would have to say that the MBR installed to the wrong drive. as a guess... or it failed to install. [07:37] !fixgrub [07:37] grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto === bravo_linux [n=pecan987@main-w.rtv5.cz] has joined #ubuntu [07:37] rockets, then just don't do the apt-get updgrade bit and look files being downloaded in the output of apt-get update === bravo_linux [n=pecan987@main-w.rtv5.cz] has left #ubuntu ["Ukonuji"] [07:37] where do I enter that command [07:37] arg i am such a newbie at this, hate this feeling [07:37] what if !fixgrub doesnt help me at all?? [07:37] is Compiz-Fusion the compiz package? [07:38] And i installed it on my primary hardisk, shall I reinstall it, you suggest Dr_willis? === steve_____ [n=chatzill@adsl-068-209-050-240.sip.asm.bellsouth.net] has joined #ubuntu === JimmyFJ [n=jimmy@0x5733ff9d.abnxx12.adsl-dhcp.tele.dk] has joined #ubuntu [07:38] private_guy, thers no one command.. you need to 'read' how to fix grub.. or just reinstall and see if any error messages show up, or try the alternative install cd. === bubard_ [n=bubard@86.66.211.223] has left #ubuntu [] [07:38] private_guy, normally it goes on the mbr of the primary hd. Do you have just the 1 hd? === steve_____ is now known as ALMRev [07:38] right i'm going to go an hide , have fun everyone , play nicely [07:38] the alternative install CD can use a USB?? === Tominator [n=thomas@p54A962BC.dip.t-dialin.net] has joined #ubuntu [07:39] tyoc, what do you mean 'use' ? you mean install to a usb hard drive? === ubnuut [n=kaufela@dsl-245-87-121.telkomadsl.co.za] has joined #ubuntu [07:39] 2 Hardisks, unless Ubuntu thought HDD number 2 was primary? === amias [n=amias@85-211-254-18.dsl.pipex.com] has left #ubuntu ["Leaving"] [07:39] yea, I dont have where to burn for the momment === skyfalcon866 [n=jack@c-24-218-246-100.hsd1.ma.comcast.net] has joined #ubuntu === Sos`` [n=Sos@esr208.neoplus.adsl.tpnet.pl] has joined #ubuntu === BoP [n=wnet@125.163.202.124] has joined #ubuntu [07:39] private_guy, as a test. i would set the pc to boot off the 2nd hd first. (in the bios) or some pc's have a Fkey to change what hd to boot. [07:40] private_guy, i would guess it isntalled to the other hd, as a first guess. :) === sean_^_ [n=sean@63.138.13.146] has joined #ubuntu [07:40] Oh yeah, Because ever since I installed Windows Vista (which i removed it) it kept on confusing the primary with the logical === adrianoc [n=adrianoc@c911e0ba.bhz.virtua.com.br] has joined #ubuntu [07:40] hi! [07:40] I've got some problems installing feisty in Virtualbox. It simply crashes... I google for the problem and it said, that it's because of der server kernel... So how can I install feisty server with the normal kernel? === Ricflair [n=chris@ip68-10-85-187.hr.hr.cox.net] has joined #ubuntu [07:40] so.. what group am I supposed to be in to use usb? === ALMRev [n=chatzill@adsl-068-209-050-240.sip.asm.bellsouth.net] has left #ubuntu ["User] [07:41] all the usb devices are owned by root, and if I chown them I can use them, but I don't what to do this every boot [07:41] SoulChild: have you read http://ubuntuforums.org/showthread.php?t=311158&highlight=master+kernel ? === Sangwa [n=miguel@45.73.30.213.rev.vodafone.pt] has joined #ubuntu [07:41] when I boot or when I go to TTY1, how can change the screen resolution to something higher? [07:41] sean_^_: disk [07:41] sean_^_: and fuse === soeren21 [n=soeren@Yc049.y.pppool.de] has left #ubuntu [] [07:42] stefg: hmm ok how did you find that out? [07:42] brb === Toran [n=youllnev@unaffiliated/toran] has joined #ubuntu [07:42] sean_^_: getting a bleeding nose for some time :-) === ticked [n=tkd@bas4-stcatharines10-1279408364.dsl.bell.ca] has left #ubuntu [] === xykiyn [n=lyjf@59.78.38.1] has joined #ubuntu === Jordan_U [n=Jordan_U@h-68-164-90-100.snvacaid.dynamic.covad.net] has joined #ubuntu [07:43] please help for driver sound c-media 5.1 === sprash [n=sprash@e176248222.adsl.alicedsl.de] has left #ubuntu [] [07:43] sean_^_, i think you shoudl clarify what you are doing exactly. Somthing seems odd about your setup. [07:43] OK, I have an external USB hard drive. I mount it, and it works fine for a while. After a few hours of being mounted, it eventually stops working--i/o errors, read-only filesystem, and other various problems. After remounting it, it works. What's the problem? (This is a new drive) === Er_39 [n=jars@dslb-088-076-210-188.pools.arcor-ip.net] has joined #ubuntu [07:43] Toran, ive had external usb hd's that over heat easially. I put a fan on them. what does 'dmesg' say about the drive? === enviromook [n=enviromo@cpe-72-191-11-71.satx.res.rr.com] has joined #ubuntu [07:44] [54959.868000] sd 7:0:0:0: Device not ready: <6>: Current: sense key: Not Ready [07:44] [54959.868000] Additional sense: Logical unit not ready, initializing command required === Paddy_EIRE [n=patrick@84.13.126.88] has joined #ubuntu [07:44] [54959.868000] end_request: I/O error, dev sdb, sector 945093783 [07:44] that. === enviromook [n=enviromo@cpe-72-191-11-71.satx.res.rr.com] has left #ubuntu ["Ex-Chat"] === [swb] [n=seb@omnicea-adsl.demon.co.uk] has joined #ubuntu === markelhas [n=mav@89.181.191.83] has joined #ubuntu === ant30 [n=ant30@85.136.35.228.dyn.user.ono.com] has joined #ubuntu [07:45] is cinelerra the best native video editor? === mats_ [n=mats@86.86.31.150] has joined #ubuntu [07:45] ppl [07:45] Hi === elate [n=Elate@85.211.238.65] has joined #ubuntu [07:45] about my mem problem think i've solved it [07:45] sean_^_: ok... 'disk' is actually debian, doesn't exist in ubuntu, as i just saw. but you can use the user administration applet to add yourself to the right groups, no need to know them on low level === Meltdown [n=luke@86.155.235.56] has left #ubuntu [] [07:46] How i can install software? I can install it.. [07:46] Toran, This may or may not be related but I've had issues with usb myself, device would offline 4-5 times before the system would pick it up but once it's mounted it seems to stay mounted. I have a feeling there might be a few issues with usb atm as I've had the same trouble with a couple keys I have here to. All the devices do work fine so it's not hardware. (at least for me it's not) [07:46] can't* === DrPppr242 [n=paul@ip72-201-7-229.ph.ph.cox.net] has joined #ubuntu [07:46] mats_, applications > add/remove... === timposey [n=timposey@63.161.232.50] has joined #ubuntu [07:46] thnks for does that have help me out === Zaraki [n=riku@cs78149046.pp.htv.fi] has joined #ubuntu [07:47] mats_, that's ubuntu's basic installer which will let you install lots of popular applications === gutts [i=gutts@ADijon-258-1-140-90.w90-26.abo.wanadoo.fr] has joined #ubuntu [07:47] nandemonai: Yeah, the device generally works fine too; it's a seagate, and it's nearly brand-new. there's no reason for it to do this === Ant1moN [n=danne@fln-161-72-233-83.3.cust.bredband2.com] has joined #ubuntu [07:47] any ideas on how to fix it? it's fucking annoying === soweto76 [n=jack@d226-43-189.home.cgocable.net] has joined #ubuntu === Carnage` [n=carnage@X9e1a.x.pppool.de] has joined #ubuntu [07:48] Toran, I did notice though that after trying Gutsy on another partition that I didn't get the same problems which also leads me to believe it's software or some such. Might want to wait for Gutsy. [07:48] my grub is messed up and I need to reinstall it.. at some point someone gave me a short command to run in terminal that fixed this problem before but I don't remember what it was.. Does anyone have any idea...??? === Pretoriab [n=Pretoria@80-193-44-104.cable.ubr07.enfi.blueyonder.co.uk] has left #ubuntu [] === keks_ [n=keks@pD9E390F0.dip.t-dialin.net] has joined #ubuntu === ko_dez [n=mt@23.Red-80-32-215.staticIP.rima-tde.net] has joined #ubuntu [07:48] Toran, And watch the lang if you could ;) Family channel n all. [07:48] Toran: does it have some auto spin down feature which is enabled? === Amo34 [n=juan@217.217.7.174.dyn.user.ono.com] has joined #ubuntu === SoulChild [n=eshat@dslb-084-060-008-112.pools.arcor-ip.net] has joined #ubuntu === Er_39 [n=jars@dslb-088-076-210-188.pools.arcor-ip.net] has joined #ubuntu [07:49] It might; how would I check? [07:49] http://us.download.nvidia.com/XFree86/Linux-x86/100.14.11/NVIDIA-Linux-x86-100.14.11-pkg1.run === Jygzy- [n=jygzy@a88-112-71-53.elisa-laajakaista.fi] has joined #ubuntu [07:49] what is the password for account www-data [07:49] !info smatmon-tools | Toran [07:49] could someone please DCC the above drivers to Moniker42 (without the _) please? :) [07:49] !grub | timposey [07:49] toran: Package smatmon-tools does not exist in feisty, feisty-seveas [07:49] !info smartmon-tools | Toran [07:49] Whats the command for moving a folder? [07:49] Or can it be done with Gnome? [07:49] timposey: grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto [07:49] toran: Package smartmon-tools does not exist in feisty, feisty-seveas [07:49] how can i edit boot options!? [07:49] aaarrrghh [07:49] wget isn't working on the desktop, laptop isn't registered... [07:49] lol [07:49] !boot [07:49] Boot options: https://help.ubuntu.com/community/BootOptions - To add/remove startup services, you can use the package 'bum', or update-rc.d - To add your own startup scripts, use /etc/rc.local - See also !grub and !dualboot - Making a boot floppy: https://help.ubuntu.com/community/GrubHowto/BootFloppy - Also see https://help.ubuntu.com/community/SmartBootManagerHowto [07:49] plus i don't think this client can handle dcc [07:50] Okay,... i just compiled my first kernel but i get this error: "init: unable to open control socket: Adress family not supported" any ideas ??? [07:50] !info smartmontools | Toran [07:50] apt-cache is telling me it's just smartmontools [07:50] toran: smartmontools: control and monitor storage systems using S.M.A.R.T.. In component main, is optional. Version 5.36-8ubuntu2 (feisty), package size 256 kB, installed size 624 kB === sonium_ [n=sonium@p54929B95.dip0.t-ipconnect.de] has joined #ubuntu === duns_s [n=duns_s@mnhm-590c3d92.pool.einsundeins.de] has joined #ubuntu === skunkworks [n=skunkwor@68-115-41-210.static.eucl.wi.charter.com] has joined #ubuntu [07:50] why does smartmontools want to install a mail server? :-L [07:50] Hi all. I have just installed kubuntu, and would like to do some development work on it, but I really need python-iconvcodec. It seems to have been dropped some time ago (2003?). What can I do about that? [07:50] Toran, Recommends: === Er_39 [n=jars@dslb-088-076-210-188.pools.arcor-ip.net] has joined #ubuntu [07:51] Toran, you can tell your package tool of choice to ignore that. [07:51] Thanks [07:51] ko_dez, could always go to the source and install/compile it yourself. === dj_ [n=neo@80.178.74.71.adsl.012.net.il] has joined #ubuntu === ni1s [n=ni1s@1-1-4-36a.dre.sth.bostream.se] has joined #ubuntu [07:51] Toran: my theory is that the drive spins down while there are still 'dirty' buffers. So the delayed write fails (drive is down), and the kernel gets a filesystem panic and puts the drive to read-only. 'dmesg' could tell if that's true [07:51] How do I move a folder in Gnome? or with the terminal? === MOTZ [n=riefler@83-215-155-58.hage.dyn.salzburg-online.at] has joined #ubuntu [07:52] kbj, just click/drag/drop it. ;) [07:52] kbj: mv dir newdir [07:52] !bash [07:52] The linux terminal or command-line interface is very powerful. Open a terminal via Applications -> Accessories -> Terminal (Gnome) or K-menu -> System -> Konsole (KDE). Guide: https://help.ubuntu.com/community/UsingTheTerminal [07:52] stefg: that sounds exactly like my problem [07:52] ERROR: Your architecture, \'x86_64\', is not supported by the [07:52] Adobe Flash Player installer. [07:52] ERROR: Your architecture, \'x86_64\', is not supported by the [07:52] Adobe Flash Player installer. [07:52] what does this mean ? [07:52] after it happens enough times, it gets so messed up sometimes I have to fsck the drive === PSyKo [n=PSyK0@kebabserv.net] has joined #ubuntu [07:52] MOTZ: https://help.ubuntu.com/community/AMD64/FirefoxAndPlugins [07:52] MOTZ, getting flash to work with the 64bit disrtos is not trivial. [07:52] MOTZ x86_64 isn't support with flash [07:52] I'll pastebin my dmesg somewhere [07:52] Flash player installer is probably only 32 bits === boojah [n=boojah@ti231110a080-9123.bb.online.no] has joined #ubuntu === lukas2 [n=lukas@dslb-084-061-061-051.pools.arcor-ip.net] has joined #ubuntu [07:52] Dr_willis: that works, but will make me do that whenever there is an upgrade. I was thinking that if I have to do it anyway, maybe I should just make it available to everyone. === The_S [n=sebaji@r190-64-218-145.dialup.adsl.anteldata.net.uy] has joined #ubuntu === barsux [n=martynas@78-61-46-246.ip.zebra.lt] has joined #ubuntu === mikl [n=mikl@pdpc/supporter/active/mikl] has joined #ubuntu [07:53] ko_dez, if its not been updated in 3 years.... well.. :) you do what you gotta do. === qeed [n=qeed@adsl-154-141-99.mco.bellsouth.net] has joined #ubuntu [07:53] how can i set the pass for wireless when booting ubuntu by default === The_S [n=sebaji@r190-64-218-145.dialup.adsl.anteldata.net.uy] has left #ubuntu ["Saliendo"] [07:53] i have 64 bit cpu ? === mycroftiv [n=hagbard@mdsnwikwbas08-pool4-a103.mdsnwikw.tds.net] has joined #ubuntu === Matol [n=matol@194.50.7.74] has joined #ubuntu [07:53] MOTZ your running a 64bit OS [07:53] omg [07:53] i downloaded the false one , cant be true [07:53] ikonia, dude solved my problem === jussi01 [n=jussi@dyn3-82-128-184-60.psoas.suomi.net] has joined #ubuntu === Matol [n=matol@194.50.7.74] has left #ubuntu [] === sparklehistory [i=sparkleh@140.225.144.236] has joined #ubuntu [07:54] how can i check? [07:54] Greyhound-, solved the mem problem === lejflo [n=jeremy@wireless-19-84.media.mit.edu] has joined #ubuntu [07:54] when is the end-of-life support for breezy? === Matol [n=matol@194.50.7.74] has joined #ubuntu [07:54] Dr_willis: so, I have taken the old version and updated the debian/control and debian/rules file, and it compiles just fine (even tried with both python2.4 and python2.5). Would it be interesting to get this updated version distributed somehow? === Nilber [n=neger@81-235-209-169-no62.tbcn.telia.com] has joined #ubuntu [07:54] how check the version [07:54] ko_dez, post a msg on the forums perhaps? [07:54] markelhas explain [07:54] was that a question markelhas ? [07:54] MOTZ uname -a [07:54] dmesg | tail -50 : http://paste.ubuntu-nl.org/36462/ [07:55] hey , can anyone please help me to install my audio drivers i have a via incorporate card :D [07:55] pls [07:55] MOTZ, just to clarify. you do NOT NOT NOT , NEED to run the 64bit disrto on a 64bit machine, the 32bit disrtos work just fine. :) [07:55] Greyhound-, don't u remenber the mem problem that i add? [07:55] ;D anyone ? [07:55] few minutes ago [07:55] Linux riefler-laptop 2.6.20-16-generic #2 SMP Thu Aug 30 23:16:15 UTC 2007 x86_64 GNU/Linux [07:55] no.... [07:55] it was a fault [07:55] I haven't talked in this channel in a few days :) [07:55] i wanted 32 bit === kousotu [n=kousotu@adsl-68-79-207-137.dsl.emhril.ameritech.net] has joined #Ubuntu [07:55] Can soemone help me? I cant get sound on my computer now with ubuntu, i have a soundblaster card [07:56] donload the 32bit one [07:56] I need some help. to use an application i needed to install libc6 (2.6.1-2) so i found it on http://packages.debian.org. I knew i had to remove alot of pther packages to install it, but i thought i'd give it a shot anyway (stupid, maybe) so now im stuck because i need the libc6-dev for the 2.6.1-2 version, but all i can seem to find for i386 is 2.6.1.1 +b1 === Davy_Jones [n=ad@87.109.217.105] has left #ubuntu [] [07:56] MOTZ, there are several little issues that may trouble you if you run 64bit disrtos. looks like you need to reinstall the 32bit disrto then. [07:56] Dr_willis: I figured it out.. couldnt drag drop dunno why but sudo mv dir newdir worked :D [07:56] ikonia, Greyhound- by trying to boot with option mem=800 and them mem=900 and them with mem=1000M the os is working fine. [07:56] can i downgrade [07:56] boojah don't install debian packages, its a different os [07:56] MOTZ re-install [07:56] Dr_willis: sounds like a plan. I guess I will do that. You know where I should post it? ubuntu-devel or ubuntu-devel-discuss maybe? === user__ [n=user@p54B43923.dip0.t-ipconnect.de] has joined #ubuntu [07:56] MOTZ, Re-install is your only option if you don't want 64bit === BlehBleh [n=jwgreene@auburn-1060.megalink.net] has left #ubuntu ["Ex-Chat"] === kboite [n=kboite@aut75-3-82-227-118-130.fbx.proxad.net] has joined #ubuntu [07:56] ikonia, i don't now but if i speficy the mem option 1g it works right [07:56] ikonia: dont ubuntu use debian packages?? like .deb files [07:56] hey anyone checked out linuxMCE? === bluefox83 is away: work [07:57] looks like i burned the wrong iso to the cd [07:57] boojah ubuntu uses debian format packages, not debian packages. Debian is a seperate OS, you just got packages for the Debian OS [07:57] damn [07:57] ahhhhhh [07:57] fuck [07:57] ko_dez, no idea there. :) [07:57] !offtopic > KevinOman [07:57] ^^ === KlrSpz [n=johng@66-193-248-206.static.twtelecom.net] has joined #ubuntu [07:57] MOTZ that language is in apporpriate [07:57] This is a family channel. [07:57] its !offtopic | KevinOman [07:57] !enter [07:57] Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation! === meme [n=meme@c-fce3e055.31-4-64736c11.cust.bredbandsbolaget.se] has joined #ubuntu [07:57] KevinOman > works fine [07:58] i downloaded the amd64 version omg [07:58] how can i set the pass for wireless when booting ubuntu by default? [07:58] really ubotu must be asleep [07:58] KevinOman, seem pm [07:58] KevinOman it sends it in a PM [07:58] ikonia: well ok, anyways, how can i either downgrade without removing all applications depending on libc6 back to 2.5 or get the dev files for what i currently have? [07:58] so it doesn't flood the screen [07:58] markelhas: in your /etc/network/interfaces file [07:58] markelhas, system > admin > network [07:58] boojah ebcause you've changed glibc, I'd strongly suggest a re-install [07:58] markelhas: but there's also a network manager udner settings that'd help better [07:58] markelhas, that's a nice gui to change /etc/network/interfaces [07:59] can anyone help me installing my audio card drivers? i have a big problem please help [07:59] can anyone help me installing my audio card drivers? i have a big problem please help [07:59] KlrSpz, PriceChild i wan't that no pass is aked when login in for wirelless [07:59] !repeat >Matol [07:59] ikonia: why is that nessesary?? [07:59] boojah libc is the core of the OS along with a few others, you've changed the whole core your OS was built around [07:59] markelhas: look in the properties, there's a place to put it [07:59] gay [07:59] ikonia: surely there must be a way to get it back === jughead [n=jughead@kubuntu.roams.utk.edu] has joined #ubuntu [08:00] boojah there is, but with respect the level your using it at, it is probably better and easier to re-install === bsheep [n=bsheep@ANantes-252-1-84-150.w86-195.abo.wanadoo.fr] has joined #ubuntu [08:00] KlrSpz, can't find it :| === khermans [i=khermans@nat/cisco/x-61c0de47dc17d7d9] has joined #ubuntu [08:00] anyone use screenlets? for some reason the manager is now telling me I don't have rsvg, but I don't know what I need exactly === mattik [n=mattik@line-10643.dyn.kponet.fi] has joined #ubuntu [08:00] KlrSpz how are you installing screenlets ? === sipior [i=sipior@jop56.nfra.nl] has left #ubuntu ["Off] [08:00] only 700mb 64bit had 4gb ? [08:00] ist that normal ? === Filthpig [n=carl@ti0010a380-1453.bb.online.no] has joined #ubuntu === lejflo [n=jeremy@wireless-19-84.media.mit.edu] has joined #ubuntu [08:01] MOTZ 64bit is not 4gb - you must have downloaded a dvd image [08:01] ikonia: from http://forum.compiz-fusion.org/showthread.php?t=1985 [08:01] err no ignore that [08:01] KlrSpz you may want to see if they are in the ubuntu repos [08:01] from deb http://hendrik.kaju.pri.ee/ubuntu === Ornate1 [n=ornate@213.252.164.4] has joined #ubuntu [08:01] ikonia: they aren't :S [08:01] amias, NVidia nForce2 with CMI9761A+ at 0xe4001000, irq 1 driver download plz [08:01] KlrSpz use dpkg -l to check the dependencies [08:01] oops [08:01] not -l === noob_ [n=noob@pc-150-101-44-190.cm.vtr.net] has joined #ubuntu [08:01] ikonia: why can't i just remove the libc6 i have then build all the packages back? [08:01] dpkg -i I think [08:01] ikonia: thign is, I was running it before I rebooted [08:01] KlrSpz, can't be found it u have roaming mode enable? [08:01] boojah becuase when you remove libc - your system will stop working, so you can't remove it === lauder [n=szok@X66X20X99.jaskom.pl] has joined #ubuntu [08:02] hey [08:02] KlrSpz, can it be found if u have roaming mode enable? === ciaron [n=soth@cpc3-broo4-0-0-cust526.renf.cable.ntl.com] has joined #ubuntu [08:02] roaming mode? === MBR666 [n=bryan@pool-141-149-241-243.buff.east.verizon.net] has joined #ubuntu [08:02] ikonia: is there no way to replace (or downgrade) the libc6 to 2.5? [08:02] boojah as I said, its a lot easier and better for you to re-install === CraigNicol [n=can@cpc1-broo1-0-0-cust856.renf.cable.ntl.com] has joined #ubuntu [08:03] apache-config ubuntu virt server - how to - need help [08:03] #polska [08:03] Ornate1 help.ubuntu.com [08:03] KlrSpz, i want to witch time that i login to ubutnu no pass is asked for wireless [08:03] ikonia: [08:03] dpkg: error processing screenlets (--install): [08:03] cannot access archive: No such file or directory [08:03] ikonia: well easier doesn't make me learn much, besides, i have stuff i dont wanna lose here === Wanderer_ [i=nomad@24-178-96-163.dhcp.stbr.ga.charter.com] has joined #Ubuntu [08:03] need format ? === svolpe [n=Gerrath_@unaffiliated/gerrath] has joined #ubuntu [08:03] irc.poznan.pl === manubonelli [n=manuele@host118-53-dynamic.56-82-r.retail.telecomitalia.it] has joined #ubuntu [08:03] boojah back up your stuff and re-install === MTecknology [n=MTecknol@host-82-211-220-24.midco.net] has joined #ubuntu [08:03] boojah its not worth the time and effort playing with glibc [08:04] lauder /server irc.poznan.pl [08:04] ikonia: largest i gotta back up is 10g, i dont have an external hdd [08:04] KlrSpz you've deleted the archive ? [08:04] i want to witch time that i login to ubutnu no pass is asked for wireless, any tips!? === cox377 [n=cox@host-84-9-75-145.bulldogdsl.com] has joined #ubuntu [08:04] ikonia: yeah [08:04] boojah move it to a partition that won't get deleted [08:04] KlrSpz so it won't work then [08:04] #dinozaury === maedhros [n=maedhros@062249176122.customer.alfanett.no] has joined #ubuntu [08:04] markelhas, set it up in system > administration > network === Matol [n=matol@194.50.7.74] has left #ubuntu [] [08:04] lauder /join # === duns_s [n=duns_s@mnhm-590c3d92.pool.einsundeins.de] has joined #ubuntu [08:05] ikonia: would you know what to do? unless reinstalling? [08:05] Hi, I'm considering buying a new PSU for my computer (the one I have is quite noisy). I have a AMD Athlon 2500+, 1,5 gb ram, nvidia gf 7600 gs and two hdds with 160 gb and 250 gb respectively. I also have seven or so usb ports. How many watts should I go for with a new psu? I think my current is 500W but that might be a bit much... Although a new psu will have to support a dual/quad core cpu and gf 8800 or better gfx card for further (And fu [08:05] ture ;) upgrades... Any ideas? [08:05] how do i end a process [08:05] boojah yes, I know how to fix that. However I would re-install as its easier === ompaul [n=ompaul@freenode/staff/gnewsense.ompaul] has joined #ubuntu [08:05] PriceChild, but i can't find nothing to store pass. [08:05] ikonia, what i i say i want to try that first === danielronin [n=ubuntu@76.206.19.220] has joined #ubuntu [08:05] markelhas, do you see your wireless adapter listed there? [08:06] boojah I'm sorry but I don't think its the best thing for you to do, as you are not at a level where it will make sense in my opinion [08:06] markelhas, click it, then select properties or edit on the right hand side [08:06] no one knows how to end a process? :( [08:06] boojah backup to dvd/cd's and re-install [08:06] Filthpig 650w atleast.. === stefano [n=stefano@190.80.219.80] has joined #ubuntu [08:06] Rhoruns whats the proble m? [08:06] problem ? === loca|host [n=tux@196.203.53.221] has joined #ubuntu [08:06] i just want to end a process! so i canr estart it [08:06] markelhas, you can then turn "roaming mode" off, and enter the details [08:06] Rhoruns man kill [08:06] kk [08:06] anyone else wanna help me with my libc6 problem? [08:07] PriceChild, can't do that cause, my password type isn't there [08:07] boojah I promise it is MUCH easier and safer to backup your data to cd's / dvd's and re-install === Artias [n=ubuntu@catv-5985a5e8.catv.broadband.hu] has joined #ubuntu [08:07] boojah I'm not fobbing you off, its just a LOT of effort [08:07] PriceChild, only wep there :( [08:07] markelhas, and yours is wpa? === UrbenLegend [n=UrbenLeg@pool-71-103-41-167.lsanca.dsl-w.verizon.net] has joined #ubuntu [08:07] Hi all, i need some partition help...badly! i wiped a ntfs partition on the left side of all my nix partitions, and now i can't boot linux :( [08:07] PriceChild, yaps [08:07] danielronin what is the error [08:07] Rhoruns, there are other routes, if a service in the form of a server sudo /etc/init.d/service-name stop and then the same again with start === Artias [n=ubuntu@catv-5985a5e8.catv.broadband.hu] has joined #ubuntu [08:07] you've probably removd grub [08:07] bastid_raZor: wouldn't that make the psu use more power than neccesary? [08:07] ompaul: hi [08:08] ikonia: i know you think im a complete noob, but i know a few things, and i dont care if its hard.. this is how i've learned what i know until this point, ok? [08:08] how could i config my guarddog to trust any protocol that firefox use(prv proxy,prv socks...)? [08:08] error 15: file not found [08:08] !grub danielronin [08:08] !grub | danielronin [08:08] danielronin: grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto === Artias [n=ubuntu@catv-5985a5e8.catv.broadband.hu] has left #ubuntu ["Ex-Chat"] [08:08] ikonia, ;-) [08:08] ok ompaul, then what are the other routes..? [08:08] does anyone know a command that would restart all usb devices? [08:08] it wasn't after installing windows, the mahcine already had windows and kubuntu on it [08:08] boojah you need to know more than a "few things" everyone has to start somewheree but messing with glibc is not an appropriate place to learn [08:08] Filthpig if you're upgrading at a later date you'll need the extra watts in the 'future' === petterah [n=petter@static243-165-178.adsl.no] has joined #ubuntu === kkathman [n=kkathman@pool-71-170-110-185.dllstx.fios.verizon.net] has joined #ubuntu [08:08] markelhas, If wpa isn't listed there then I can't help sorry. [08:08] i was trying to make space for a small testing distro [08:09] ikonia: lol.. you reeeally want me to format don't you :P [08:09] boojah its the right thing to do === IcyT [n=icyt@91.89.150.14] has joined #ubuntu [08:09] danielronin what is the exact error === HymnToLife` [n=fkraiem@unaffiliated/hymntolife] has joined #ubuntu === Paddy_EIRE [n=patrick@84.13.126.88] has joined #ubuntu [08:09] how can i use my gpu at full speed? === banditti [n=banditti@63-230-200-233.phnx.qwest.net] has joined #ubuntu [08:09] evri2: how do you know its not === banditti [n=banditti@63-230-200-233.phnx.qwest.net] has left #ubuntu ["Leaving"] [08:09] error 15: file not found [08:09] ikonia: simple nvclock -s [08:10] ikonia: it runs at 100mhz === kalis_bliumkvist [n=patrimpa@ctv-213-164-102-136.vinita.lt] has joined #ubuntu [08:10] ikonia: well, you might be right, in witch case i will soon learn and follow your advice, but i want to try learning something new first [08:10] ikonia: it should run at 450 :p [08:10] danielronin ok - so it sounds like your boot partition has moved/change [08:10] Rhoruns, if you own it, kill -9 process-id (ps -auwx | less if you want to see them all) and there are many other levels of kill you may want to "man kill" for it and sudo kill -9 pid if you don't own it be careful [08:10] boojah great, learn something new, but not glibc === crocd [n=crocd@lanwan.plus.com] has joined #ubuntu [08:10] yeah i think that's what happened [08:10] evri2 nvidia tools ? [08:10] ikonia: yes, glibc!! [08:10] I'm going to a university that doesn't broadcast their SSID. When I go anywhere else that is, I have a flawless time with wireless. They have two sets of SSID's, student1 and student2. What happens is that the network manager never seems to connect to the university wireless so I need to make separate profile for each. Does anybody know any solutions for this? I really want to be able to just use the roaming mode for all of my wireles [08:10] s. [08:10] no [08:10] from package manager [08:10] danielronin follow the grub link ompaul gave you and read it, it will talk you through it [08:10] download nvclock [08:10] i already restored GRUB from the live cd, and t's still pointing in the wrong direction === IndyGunFreak [n=ken@user-0cdv00n.cable.mindspring.com] has joined #ubuntu [08:10] after that nvclock -s shows gpu and its rams speed === noob_ [n=noob@pc-150-101-44-190.cm.vtr.net] has joined #ubuntu [08:11] danielronin rad the link and it tells you how to apply it correctly [08:11] read === left1 [n=sean@ip70-179-112-120.dc.dc.cox.net] has joined #ubuntu [08:11] not rad === Moniker42 [n=ubuntu@87-194-119-253.bethere.co.uk] has joined #ubuntu === mangojambo [n=mj@201.86.75.57.adsl.gvt.net.br] has left #ubuntu [] [08:11] hey, how do install the nvidia graphics drivers from binary/ [08:11] *binary? [08:11] !nvidia | Moniker42 [08:11] Moniker42: To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto === ubu [n=ubu@host-85-27-16-225.brutele.be] has joined #ubuntu [08:11] Moniker42: don't use the binary packages, check out the nvidia-glx package in the ubuntu repo [08:11] PriceChild, yes i already have them.... [08:12] anyone know how to install the latest audacity from source? I thought i did it right but the "make install" command just keeps running forever. [08:12] The "alternate" installer CD is much faster, right? === ds500ss [n=marcel@vrs-c-16f6f.adsl.wanadoo.nl] has joined #ubuntu [08:12] Moniker42, then what's the problem? [08:12] left1 did "make" work [08:12] ikonia, just apt-get nvidia-glx? [08:12] Moniker42 read the link pricechild sent [08:12] PriceChild, gdm doesn't work... [08:12] Moniker42 it explains it all [08:12] Moniker42, what card do you have? === tyger [n=tyger@89.137.124.70] has joined #ubuntu [08:12] 7950GT === stefano [n=stefano@190.80.219.80] has joined #ubuntu [08:12] arg [08:12] PriceChild the latest nvidia drivers have a problem with the currenct ubutnu kernel for some cards [08:12] We'll let you off then Moniker42. === RedRose [n=RedRose@utdpat241254.utdallas.edu] has joined #ubuntu === robotpoke [n=jonathan@cmcust5-118.125.newnanutilities.org] has joined #ubuntu [08:12] ahh the 7950 [08:13] so...... how do i get GDM? ;) === tyger [n=tyger@89.137.124.70] has left #ubuntu ["Ex-Chat"] [08:13] !xconfig | Moniker42 [08:13] Moniker42: To reconfigure your X server, open a console and type sudo dpkg-reconfigure xserver-xorg - To configure only the driver and resolution, type sudo dpkg-reconfigure xserver-xorg -phigh - See also !FixRes [08:13] iknoia: it worked it just stopped running now. But how do i run the program now? [08:13] Moniker42, second command ^ [08:13] how do i check which group a user belongs to? [08:13] then we'll fix it [08:13] robotpoke, groups [08:13] left1 audicity [08:13] thx [08:13] robotpoke id $user === waldo323 [n=waldo323@h69-129-95-226.69-129.unk.tds.net] has joined #ubuntu [08:13] Hello, I'm trying to install Ubuntu from the lice CD and every time it tried to repartition the Disk, it locks up [08:13] It doesn't show up in the applications like the old version did that I installed from automatix [08:13] left1 nope because you've broke your ubuntu package manager dependency tree [08:13] thx again! [08:13] PriceChild, i ran that already [08:13] it didn't work [08:13] I do a ps aux and NTFSwriter is running, but nothing is happening [08:13] RedRose: Try to partition your disk manually using the live CD. [08:14] Moniker42, then you restarted gdm? [08:14] PriceChild, yes === Cykus [n=cykus@tkp30-3.rybnet.pl] has joined #ubuntu [08:14] Moniker42, you did the second command... choosing any defaults? [08:14] PriceChild, i think so [08:14] So how do I run the new audacity? using the audacity command asks me if i want to install it === CraigNicol is now known as mad_goldfish [08:14] Moniker42, do the following [08:14] left1 ahhh it will be your path [08:14] Moniker42: how's it going? [08:14] left1 where did you install the new version ? === khermans__ [n=khermans@c-75-67-197-102.hsd1.ma.comcast.net] has joined #ubuntu [08:14] Moniker42, sudo dpkg-reconfigure xserver-xorg -pcritical === manubonelli [n=manuele@host118-53-dynamic.56-82-r.retail.telecomitalia.it] has joined #ubuntu [08:14] Moniker42, then sudo /etc/init.d/gdm restsart [08:15] ikonia: I've already tried a grub-install, and it's pointing the wrong way since there's one less partition on the table (??) === HymnToLife` [n=fkraiem@unaffiliated/hymntolife] has joined #ubuntu [08:15] danielronin the guide doesn't tell you to do grub-install === RealNitro [n=jens@ip-83-134-130-145.dsl.scarlet.be] has joined #ubuntu [08:15] RedRose: RedRose By manually, I mean going to System Config -> advanced -> Disks (or something like that) [08:15] i'm assuming the desktop folder where it was extracted [08:15] left1 nope - why did you build a new version [08:15] need to reformat ? [08:15] Filthpig, i'll get back to you on that once i have a GUI :) [08:15] I just did the compile command and the install and made sure i had all the dependecies and devlopers installed [08:15] left1 there's a package on getdeb.net if that helps [08:15] PriceChild, okay thanks i'm going to boot the recovery console now and try that [08:15] because the 1.2.6 doesn't let me do batch files === zegevrijtt [n=virtual@77.249.27.214] has joined #ubuntu === MOTZ [n=riefler@83-215-155-58.hage.dyn.salzburg-online.at] has left #ubuntu [] === lejflo [n=jeremy@wireless-19-84.media.mit.edu] has joined #ubuntu [08:15] I want to make a batch file for my podcasts [08:15] ikonia: isn't libc6 2.6 in gutsy? will upgrading to the development gutsy version fix it? [08:16] is there a way to dynamically size ram usage in virtualbox? [08:16] boojah no === crazysoilder [n=crazysoi@85.102.238.72] has joined #ubuntu === snocone [n=Anon@216-67-50-115-cdsl-rb2.cwc.acsalaska.net] has joined #ubuntu [08:16] RedRose: Because there's a known bug with the GUI Installer CD and manual partitioning. [08:16] PriceChild, always very helpful! =) === GarethAdams [n=gareth@pdpc/supporter/base/GarethAdams] has joined #ubuntu [08:16] ok I need some help [08:16] @left1: on getdeb.net its version 1.3.3 beta [08:16] left1 you shouldn't compile stuff if you don't understand it, for future reference [08:16] boojah, please don't upgrade to the development version of ubuntu! [08:16] I have practically no experience [08:16] hi. how can is deny a program from having access to the network ? i cant find a application level firewall for linux.. ?????? [08:16] why? [08:16] scofield, ask your question :) [08:16] snocone you have to ask a question [08:16] zegevrijtt iptables is your friend [08:16] boojah, because it is alpha and not finished. === davee_ [n=dave@80.54.27.43] has joined #ubuntu [08:16] maedhros, Ok, Also, how can i run a chkdsk or do some type of fault check on my sda? [08:16] I know I'm getting to that :) === maxagaz [n=g@lab75-3-82-235-26-179.fbx.proxad.net] has joined #ubuntu [08:16] How can stop my gpu from lowering its GPU speed? [08:16] evri2, what drivers are you using? [08:16] evri2 does it not scale up when busy === nandemonai [n=nandemon@ppp121-45-120-131.lns11.adl6.internode.on.net] has joined #ubuntu [08:17] sory! where is epiphany extensions ??? [08:17] evri2 eg: idle at a lower speed [08:17] I am on a powerpc laptop and can't seem to get internet working in any way [08:17] ikonia: sometimes not === Kworth [n=Kworth@dslb-088-065-105-034.pools.arcor-ip.net] has joined #ubuntu [08:17] PriceChild so?!?! its not long until it comes, i can live with the bugs [08:17] snocone: i've been there [08:17] snocone, how do you connect to the internet. [08:17] /close === ni1s [n=ni1s@1-1-4-36a.dre.sth.bostream.se] has joined #ubuntu [08:17] dsl + airport [08:17] ikonia: is there a way or not? [08:17] boojah, #ubuntu+1 [08:17] boojah development versions are not really for new users [08:17] if there is not an application filer firewall .. linux is a leak test hell [08:17] close === _Jaak_ [n=ernst@elanser.demon.nl] has joined #ubuntu === godstorm [n=godstorm@static-71-245-48-23.sctnpa.east.verizon.net] has joined #ubuntu [08:17] evri2, what drivers are you using? === ds500ss [n=marcel@vrs-c-16f6f.adsl.wanadoo.nl] has left #ubuntu [] === BFC [n=timo@cs78148046.pp.htv.fi] has joined #ubuntu [08:17] If i want to run a script every day can i just put it into the folder /etc/cron.daily [08:17] ? [08:17] PriceChild: nvidia-glx-new [08:17] t thee must be something ? [08:17] Kworth, crontab -e [08:17] evri2 not that I'm aware of, I'm not into "clocking" tools [08:18] ikonia: i didn't start using linux yesterday [08:18] how do i use my sound card to talk on TS and Listen at the Same Time? [08:18] hi. does anybody know of a programme similar to skype, but which is open-source and allows phone calls to real phones [08:18] boojah a new user is someone with experience, your still very new [08:18] BFC, ekiga === punkQu [n=tommi@a91-153-167-171.elisa-laajakaista.fi] has joined #ubuntu === Nilber [n=neger@81-235-209-169-no62.tbcn.telia.com] has joined #ubuntu [08:18] PriceChild, thats not my crontab file [08:18] what's the package that has RSVG module in it for python? [08:18] BFC I think you can use astrix also as a client and a server === crazysoilder [n=crazysoi@85.102.238.72] has left #ubuntu ["Leaving"] === tyger [n=tyger@89.137.124.70] has joined #ubuntu [08:18] Kworth, pardon? [08:18] ikonia: and i really dont care... my question is: does ubuntu gutsy use libc6 2.6.1-2? or is it 2.6.1-1? [08:18] I tried to install bcm43xx but i don't have internet, so I can't install it [08:19] !gutsy | boojah [08:19] boojah: Gutsy Gibbon is the code name for the next release of Ubuntu (7.10) | (due October 2007) | It is development software, as such unstable, support _only_ in #ubuntu+1 [08:19] boojah thats not relevvent to your situation [08:19] PriceChild, My Crontabs are written into some other file if i do sudo cron -e its just empty [08:19] PriceChild: no solution i think? === Biohazard is now known as Bio|Geb|afk [08:19] snocone you don't need the internet to install it [08:19] Kworth, i didn't say sudo === BlackF1re [n=jmarsman@ip3e83670c.speed.planet.nl] has joined #ubuntu [08:19] Kworth, i said crontab -e === godstorm [n=godstorm@static-71-245-48-23.sctnpa.east.verizon.net] has joined #ubuntu [08:19] PriceChild, same there without sudo [08:19] evri2, I'm not convinced there's a problem === azi_ [n=azi@um-sd06-229-2.uni-mb.si] has joined #ubuntu [08:19] @snocone: you need to get fwcutter and use the driver from the windows cd === BlackF1re [n=jmarsman@ip3e83670c.speed.planet.nl] has left #ubuntu ["Ex-Chat"] [08:19] Kworth, and that's a your user's crontab... [08:20] hm.. is there any way for me to be able to install opera? [08:20] s/a // [08:20] (with synaptics) [08:20] !opera | azi_ [08:20] azi_: opera is an advanced and free (only as in price) web browser. Install it via Applications->Add/Remove..., making sure that "Show commercial applications" (dapper only) is checked. For more info on opera please see: https://help.ubuntu.com/community/OperaBrowser [08:20] azi_: look in synaptic and see if you see it [08:20] well nevermind [08:20] so I need to dl the whole windows iso? === doddi [n=mark@dyn-62-56-119-161.dslaccess.co.uk] has joined #ubuntu [08:20] PriceChild: k here is the problem [08:20] @no the driver that came with your network card === godstorm [n=godstorm@static-71-245-48-23.sctnpa.east.verizon.net] has joined #ubuntu [08:20] @snocone i meant [08:20] opere is lighter weight on resources and yet has more options by default than firefox [08:20] !cron [08:20] !crontab [08:20] opera [08:20] PriceChild: I use compiz-fusion.Sometimes my gpu doesn't scale up and effect will be laggy [08:21] cron is a way to schedule execution of software/scripts. See https://help.ubuntu.com/community/CronHowto - There is also a decent Howto at http://www.tech-geeks.org/contrib/mdrone/cron&crontab-howto.htm [08:21] effects* [08:21] ikonia: i just ran the root/setup/intall commands, should this make me able to boot the HDD? [08:21] but, uh.. I'm confused [08:21] does Ekiga allow me to phone "real" phones? [08:21] ok how do i use my Sound Card To Talk on TS and Listen At the Same Time? [08:21] danielronin if you have selected the right options yes [08:21] which man do I have to open to find out about the syntax of the cronfile? [08:21] Sorry, I don't know anything about crontab - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [08:21] like "skype out"? === Ecalix [n=Ecalix@206.190.145.2] has joined #ubuntu [08:21] BFC, I think so yes. [08:21] fwcutter is what exactly [08:21] @scocone ubuntu provides bcm43xx on the cd, but it doesn't provide bcm43xx-fwcutter which you need to extract the firmware files from the windows driver [08:21] BFC you need a provider [08:21] oh nice === Carnage`` [n=carnage@Ze0ce.z.pppool.de] has joined #ubuntu [08:22] ? === stefan__ [n=stefan@dslb-084-061-210-222.pools.arcor-ip.net] has joined #ubuntu === BlackBrain [n=hmunoz@12.41.135.250] has joined #ubuntu === evri2 [n=evri2@88.243.34.117] has joined #ubuntu [08:22] @scocone bcm43xx requires these firmware files to use the network card [08:22] so i just right click the .deb and it installs? [08:22] ikonia: , PriceChild thanks [08:22] hey === danielronin crosses fingers === obnibolongo [n=obnibolo@78.130.28.114.rev.optimus.pt] has joined #ubuntu [08:22] azi_: welcome === houmala [n=mike@c-75-65-139-175.hsd1.la.comcast.net] has joined #ubuntu === dori [n=dori@wikipedia/Dori] has joined #ubuntu [08:22] where do I get those firmware files [08:22] @left1: if you're talking about audacity then yes === zbyszek [n=zbyszek@limbo.altec.pl] has joined #ubuntu [08:22] can you help? [08:22] me === obnibolongo [n=obnibolo@78.130.28.114.rev.optimus.pt] has left #ubuntu [] === Ballena|away is now known as Ballena [08:22] BFC, iirc its also slightly cheaper [08:22] godstorm if you ask a question, maybe [08:23] i did [08:23] godstorm: sorry I missed it [08:23] @snocone you have to get bcm43xx-fwcutter first online and then use it to get firmware files from the windows driver that came with your network card [08:23] ikonia: thanks for pointing me in the right direction [08:23] thanks! [08:23] how do i use my sound card to talk on TS and Listen At the Same time? [08:23] danielronin no problem === Markos [i=markl@CPE000ec6b59478-CM001225dba2fe.cpe.net.cable.rogers.com] has joined #ubuntu [08:23] like [08:23] my MP3 [08:23] @scocone i know it sounds like a circle, need internet to get internet [08:23] godstorm setup the mic [08:23] and it will work [08:23] where can I get bcm43xx-fwcutter? [08:23] @scocone ubuntu repo website online [08:24] my Team Speak is set up and it works tho === MBR666 [n=bryan@pool-70-16-43-154.buff.east.verizon.net] has joined #ubuntu === Sorata [n=sorata@p5B23F45C.dip.t-dialin.net] has joined #ubuntu [08:24] but i mean by to listen to my Mp3 music === Sorata [n=sorata@p5B23F45C.dip.t-dialin.net] has left #ubuntu ["Ex-Chat"] [08:24] and talk on TS [08:24] godstorm open a music player [08:24] at the same time [08:24] k [08:24] I'm confused, though. why do you keep referring to the 'windows driver'? [08:24] godstorm thats fine === mfi [n=mfi@p5487CFCA.dip.t-dialin.net] has joined #ubuntu === ugarit [n=chatzill@pool-72-73-216-71.cmdnnj.fios.verizon.net] has joined #ubuntu [08:25] @scocone its the driver that came with your network card, they're usually for windows [08:25] i am using gnome and its filemanager. i wonder if (and how) it is possible to change the menu, that appears when right clicking on a .rar-file. i see an "extract here"-item, which extracts the clicked on rar file. i would like to have an additional menu-item which extracts, and then - if successful - deletes the rar-file and leaves only the extracted files [08:25] is that possible? [08:25] ok it's open but i get noo sound out of it tho only TS [08:25] @snocone do you have the original cd that came with your network card? [08:25] it's airport, so it's not windows [08:25] and yes [08:25] pricechold: what is iirc [08:25] ? [08:25] do I write into my crontab as coomand "/home/markus/cronjobs/script.sh" or "sh /home/markus/cronjobs/script.sh"? === neuratix [n=lorents@static149-194.adsl.no] has joined #ubuntu [08:26] @snocone oops sorry, i am just so used to broadcom and windows [08:26] Kworth: The first one [08:26] BFC: if I recall correctly === KevinOman [n=kevin@66-227-221-83.dhcp.klmz.mi.charter.com] has left #ubuntu [] [08:26] ikonia: i fixed it :P === numist [n=scott@freenode/staff/scott] has joined #ubuntu [08:26] @snocone okay find the driver .sys and use bcm43xx-fwcutter to cut it and install it === Moniker42 [n=root@87-194-119-253.bethere.co.uk] has joined #ubuntu [08:26] mm [08:26] PriceChild: that didn't work =( === Dromar [n=david@pur31-1-82-224-15-167.fbx.proxad.net] has joined #ubuntu === Kilroo [n=Kilroo@cpe-071-076-173-175.triad.res.rr.com] has joined #ubuntu [08:27] PriceChild: i'm on IRSSI from the recovery console now [08:27] can explain that in the simplest terms possible? [08:27] *you [08:27] Moniker42, what have you broken dude? :) [08:27] ikonia: wget http://archive.ubuntu.com/ubuntu/pool/main/g/glibc/libc6_2.6.1-1ubuntu3_i386.deb then dpkg -i libc6_2.6.1-1ubuntu3_i386.deb [08:27] PriceChild: something important, it would seem [08:27] Moniker42, that resets your xorg.conf to default settings just like after an install... [08:27] @snocone okay try finding a .sys file on that cd [08:27] Moniker42, what error is x giving? [08:27] PriceChild: if you tell me what to typie i could send you log files and the like? :) [08:27] ikonia: i knew reinstalling wasn't nessesary [08:28] ok just a minute === Sn00p [n=fv@bl9-179-222.dsl.telepac.pt] has joined #ubuntu [08:28] PriceChild: hang on i'll run it again and tell you word-for-word... === thunga [n=francisc@201-2-216-91.bnut3702.dsl.brasiltelecom.net.br] has joined #ubuntu === thunga [n=francisc@201-2-216-91.bnut3702.dsl.brasiltelecom.net.br] has left #ubuntu ["Ex-Chat"] [08:28] Moniker42, it'll be /var/log/Xorg.0.log or /var/log/Xorg.0.log.old === mueller [n=mueller@DSL01.83.171.159.92.ip-pool.NEFkom.net] has joined #ubuntu === TylerJGillies [n=tyler@66-233-95-194.mau.clearwire-dns.net] has joined #ubuntu === janolap1 [n=jean@d213-103-56-24.cust.tele2.fr] has joined #ubuntu [08:29] PriceChild: it tells me... yea. i was just going to say - how do i send you that though? === LogicalDash [n=sanotehu@63.203.113.195] has joined #ubuntu [08:29] UrbenLegend: there's just some install packages === drew2 [n=drew@EV-ESR-74-215-26-146.fuse.net] has joined #ubuntu [08:29] hello [08:29] ?? [08:29] just give me the line with an EE on the left of it === nasso [n=nasso@217-210-190-218-no95.tbcn.telia.com] has joined #ubuntu [08:29] Moniker42, ^ [08:29] @snocone oh dear okay holdon === UnluckyMike [n=mike@c-66-177-166-235.hsd1.fl.comcast.net] has joined #ubuntu [08:29] PriceChild: umm... i can't get another tty at the moment for some reason [08:29] Moniker42, btw EE stands for errors, WW stands for warnings... you get the idea :) === eljo__ [n=johannes@p57ADCA54.dip.t-dialin.net] has joined #ubuntu [08:29] is anyone here hot with mod_perl and apache? :) === KlrSpz [n=johng@66-193-248-206.static.twtelecom.net] has left #ubuntu [] [08:29] I have a problem with a installing a program, I'm new to ubuntu [08:29] @snocone in the meantime this might help with familiarizing you with bcm43xx-fwcutter http://ubuntuforums.org/showthread.php?t=185174 [08:29] PriceChild: can i dcc you the whole file from IRSSI? or open the file using IRSSI? seeing as i can't get another tty... [08:29] nasso, Just ask your question and you'll find out ;) === marcos [n=marcos@189.141.73.76] has joined #ubuntu === Pingviller [n=chatzill@89.233.242.14] has joined #ubuntu [08:30] ummm [08:30] can you help === ubuntu [n=ubuntu@dslb-084-061-172-104.pools.arcor-ip.net] has joined #ubuntu === Nilber [n=neger@81-235-209-169-no62.tbcn.telia.com] has joined #ubuntu === xOjka [n=wyller@12.80-203-100.nextgentel.com] has joined #ubuntu [08:30] lol [08:30] hi [08:30] :) [08:30] I need to install ntfsprog and am finding the .configure and make confusing === Lattyware [n=Latty@host81-129-251-93.range81-129.btcentralplus.com] has joined #ubuntu [08:30] xOjka, hello :) [08:30] im trying to install apache::asp. have just installed mod_perl via libapache2-mod-perl2 [08:30] @snocone okay use this file instead === goldbond [n=walsh@74-142-8-169.dhcp.insightbb.com] has joined #ubuntu === danielronin [n=ubuntu@76.206.19.220] has joined #ubuntu === Roidal [n=roidal@091-141-091-188.dyn.one.at] has joined #ubuntu [08:31] there is a libapache-asp-perl package in the packagesystem but is that for apache "1"? === Julie [n=Julie@dsl001-185-195.snd1.dsl.speakeasy.net] has joined #ubuntu === car_watt [n=cwatson@163.178.20.32] has left #ubuntu ["Leaving"] === BSunDay [n=none@a88-115-207-75.elisa-laajakaista.fi] has joined #ubuntu [08:31] I untarred the files and did the ./configure on it [08:31] :/ [08:31] brb [08:31] but now i need to "make" it, as the forums say [08:31] guys [08:31] @snocone then type 'sudo bcm43xx-fwcutter -w /lib/firmware/`uname -r` ~(path to whereever you installed the file)/wl_apsta.o' === thicknsexy [n=thicknse@c-71-206-113-198.hsd1.mi.comcast.net] has joined #ubuntu === Er_39 [n=jars@dslb-088-077-021-180.pools.arcor-ip.net] has joined #ubuntu === BSunDay [n=none@a88-115-207-75.elisa-laajakaista.fi] has joined #ubuntu [08:31] what does quiet do in kernel parameters? === BSunDay [n=none@a88-115-207-75.elisa-laajakaista.fi] has left #ubuntu ["Ex-Chat"] [08:32] abend [08:32] I'm confused as how to execute the command === LinAsH [n=missmagu@86.68.18.58] has joined #ubuntu === Roidal is now known as tes3 [08:32] boojah well done [08:32] oh man, this could get complicated. see I have to switch partitions to do that. it's on this computer [08:32] ikonia: no dice =( [08:32] ikonia: why were you so obsessed about me reinstalling the whole thing when you could just replace it with the ubuntu deb? [08:32] Hi there, I have a problem with my webcam : a labtech webcam pro [08:32] Hi all. So i wanna test KompoZer(NVU) HTML editor, it's not in the Add/Remove(All Avaliable), and not in synaptic either. So ill get it from SF.net. But what to get, .gz-.deb-.rpm??? [08:32] drew2 simply type make [08:32] ok i am back [08:32] http://ubuntuforums.org/showthread.php?t=398122 that is what I'm trying to do [08:32] is there any one here? [08:32] boojah its not that simpley, you could still have troubles [08:32] is there a way to manually edit menu.lst and fix it? === tes3 is now known as Roidal [08:33] @snocone yeah cuz you got to download the files to get internet, lol [08:33] danielronin are you getting the same error [08:33] what is the syntax? [08:33] danielronin vi /boot/grub/menu.lst [08:33] yeah error 15: file not found [08:33] ikonia: yea.. some apps might complain, but at least you should have told me to try that first [08:33] does anyone here have a simple perl-script that is can use to test that mod_perl is working? :) === tyoc [n=ubuntu@189.181.154.40] has left #ubuntu [] [08:33] boojah as I said, its not that simple === k3nt1 [n=k3nt1@71.144-242-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [08:33] drew2 make .. that is all you need. after that finishes : make install [08:33] danielronin ok - so your problem is not menu.lst === freddd1 [n=freddy@p3E9E36B5.dip0.t-ipconnect.de] has joined #ubuntu [08:34] danielronin: show me your disk layout in the ubuntu pastebin [08:34] ikonia: dpkg -i isnt that simple? well gtg reinstall my nvidia modules [08:34] by removing that one partition i think i chnaged the mount #s of every point on the right of it [08:34] bye bye [08:34] It says no targets specified [08:34] boojah the implications arn't that simpleuy === mariajose [n=mariajos@pc-58-43-45-190.cm.vtr.net] has joined #ubuntu [08:34] umm === iresh [n=iresh@124.43.192.16] has joined #ubuntu === guardian [n=Guardian@ANantes-252-1-91-140.w86-203.abo.wanadoo.fr] has joined #ubuntu === faileas [n=Geek@cm209.delta20.maxonline.com.sg] has joined #ubuntu === gjehle [n=gjehle@p5B17CAA4.dip0.t-ipconnect.de] has joined #ubuntu === labmicro4 [n=labmicro@micropro4.rc.unesp.br] has joined #ubuntu === k3nt1 [n=k3nt1@71.144-242-81.adsl-dyn.isp.belgacom.be] has left #ubuntu [] === Moniker42 [n=root@87-194-119-253.bethere.co.uk] has joined #ubuntu [08:35] ok urbenlegend, I lost you [08:35] The webcam is ok with lsusb and dmesg [08:35] What types off packages is used on Ubuntu? .rpm or deb? [08:35] mmm [08:35] PriceChild: (WW): NVIDIA: no matching device section for instance (busid pci:7:0:0) found [08:35] iko [08:35] Anyone has had problems runing mercury messenger??? [08:35] (EE) no devices detected [08:36] But Camorama doesn't show me a picture (black or scramble picture) [08:36] PriceChild: fatal server error: no screens found [08:36] PriceChild: could this have something to do with switching from an AGP8x card to a PCI-E card without telling ubuntu? === Roidal [n=roidal@091-141-091-188.dyn.one.at] has left #ubuntu [] === Distro^Junkie [n=distroju@mctnnbsa29w-156034018057.nb.aliant.net] has joined #ubuntu === Kworth22 [n=Kworth@dslb-088-065-105-034.pools.arcor-ip.net] has joined #ubuntu === gmvyhh [n=gmvyhh@83.230.195.62] has joined #ubuntu [08:36] maybe I should get a wired connection working in ubuntu first, so I don't have to keep switching back and forth between ubuntu and osx [08:36] PriceChild: my mobo is one of the rare breed that supports both types... [08:36] ok, let do this then [08:36] @snocone yeah that would be a good idea === froud [n=sean@dsl-242-191-75.telkomadsl.co.za] has joined #ubuntu [08:36] assuming that's easier [08:36] is there an alternative to nautilus or the file browser in Ubuntu, it is sometimes just really slow? === visik7 [n=dksakd@unaffiliated/visik7] has joined #ubuntu [08:36] Does anyone can help me with my webcam problem ? [08:37] oh here is a OP and Knows Wht i need help with [08:37] anyone here who can help with building martian on 2.6.15-26-server [08:37] I tried, but had problems with it as well [08:37] who* [08:37] @snocone or you could just download bcm43xx-fwcutter and wl_apsta.so and then transfer those files to ubuntu [08:37] lol [08:37] godstorm whats the actual problem [08:37] It fails to build the martian_helper === steveatlocalhost [n=steve@89.241.226.186] has joined #ubuntu === wib [n=jojo@dyndsl-091-096-040-083.ewe-ip-backbone.de] has joined #ubuntu [08:37] Moniker42, yeah that could be it... pastebin your xorg.conf? === animimotus [n=animimot@150.199.100-84.rev.gaoland.net] has joined #ubuntu === Carnage` [n=carnage@Ybff3.y.pppool.de] has joined #ubuntu [08:38] PriceChild: i have no GUI... could you tell me how to dcc you it from irssi? [08:38] my Sound Card Will Not Let Me Listen to my Songs and Talk on Team Speak at the Same Time? === SoulChild [n=eshat@dslb-084-060-008-112.pools.arcor-ip.net] has joined #ubuntu === gmvyhh [n=gmvyhh@83.230.195.62] has joined #ubuntu [08:38] godstorm what happens ? === fragalot [n=thomas@gentoo/user/FamousToaster] has joined #ubuntu [08:38] Moniker42, I don't do dcc [08:38] antone with mercury??? === janolap1 [n=jean@d213-103-56-24.cust.tele2.fr] has left #ubuntu ["Ex-Chat"] [08:38] Trones_: could someone possibly help me. i am studying linux but dont have a *nix box. can someone make me a root shell account that i can practice with? [08:38] hey i just compiled a vanilla kernel but i get: "request_module: runaway loop modprobe binfmt_464c" ,.. nay ideas ??? [08:38] hmm, where did that Trones_: thing come from === xjkx [n=x@201009107041.user.veloxzone.com.br] has joined #ubuntu [08:38] PriceChild: okay - how do i get it to you then from the recovery console and no GUI? [08:38] is virtualbox available for ubuntu 7.04 ? [08:39] ok the Music Just Plays and noo Audio comes out but Team Speak can [08:39] tho [08:39] fragalot have you tried virtualising? [08:39] fragalot: are you serious? [08:39] Moniker42, i don't know... :/ [08:39] savetheWorld: no :p === nubbe [n=martin@c83-248-145-131.bredband.comhem.se] has joined #ubuntu [08:39] Distro^Junkie: yes just add the repo [08:39] Distro^Junkie, read their site [08:39] There is no #lilo channel, so: On grub i had this error while trying to go to partition hdb2: "error18: selected cylinder exceeds maximum supported by bios". The grub is installed in hda, then i want to install lilo to hdb, maybe lilo can handle this, but running /sbin/lilo -M /dev/hdb didnt work. anyone knows? [08:39] savetheWorld: in defocus it wasn't much fun, so i figured i'd try here. [08:39] thanx [08:39] UrbenLegend: could you link me to where I can dl both of those? [08:39] godstorm make sure both are using alsa [08:39] it only uses one Sound only not For All [08:39] savetheWorld: i'd try in #gentoo, but i kinda need that channel ^_^ === slacksurf [n=Slack@200.211.218.132] has joined #ubuntu [08:39] alsa? [08:39] PriceChild: how do i switch between channels in IRSSI? [08:39] I'm going to a university that doesn't broadcast their SSID. When I go anywhere else that is, I have a flawless time with wireless. They have two sets of SSID's, student1 and student2. What happens is that the network manager never seems to connect to the university wireless so I need to make separate profile for each. Does anybody know any solutions for this? I really want to be able to just use the roaming mode for all of my wireles [08:39] s. === samitheb1rber [n=stb@hoas-fe17dd00-81.dhcp.inet.fi] has joined #ubuntu [08:39] it on the IPOD === youknowme [n=tom@75-121-156-63.dyn.centurytel.net] has joined #ubuntu === mariajose [n=mariajos@pc-58-43-45-190.cm.vtr.net] has left #ubuntu [] [08:40] fragalot: well its a good way to get in trouble. [08:40] @snocone are you getting the private messages? [08:40] savetheWorld: indeed it is.. (a) [08:40] nope === fragalot [n=thomas@gentoo/user/FamousToaster] has left #ubuntu ["*hides*"] [08:40] MTecknology: try wifi-radar = sudo apt-get install wifi-radar [08:40] !offtopic | FrancoGG [08:40] bah [08:40] ? [08:40] FrancoGG: #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome! === effie_jayx [n=valles@ubuntu/member/effie-jayx] has joined #ubuntu [08:40] @snocone wl_apsta.so http://boredklink.googlepages.com/wl_apsta.o [08:40] alsa wht that? [08:40] steveatlocalhost, thanks [08:40] Can I get some help with firefox? === GNine [n=gnine@c-24-99-14-101.hsd1.ga.comcast.net] has joined #ubuntu [08:40] @snocone are you using feisty? [08:40] no problem [08:40] godstorm the sound system === mariajose [n=mariajos@pc-58-43-45-190.cm.vtr.net] has joined #ubuntu [08:40] yeah [08:40] k [08:40] hold on === thicknsexy [n=thicknse@c-71-206-113-198.hsd1.mi.comcast.net] has joined #ubuntu [08:41] youknowme whats up [08:41] hey === krychek [n=krychek@catv-5062b89c.catv.broadband.hu] has joined #ubuntu === rockets [n=rockets@olwalcsfw01.ipnetzone.net] has joined #ubuntu === ALMRev [n=chatzill@adsl-068-209-050-240.sip.asm.bellsouth.net] has joined #ubuntu [08:41] and that page doesn't exist [08:41] how do you echo a command so when the box loads it boots the string i know how to do it i just dont know where to do it [08:41] steveatlocalhost, will that just work with the network manager, will that replace it, or will I need to configure them to work with each other? [08:41] steveatlocalhost, Its been randomly crashing lately and now its doing it more often than ever [08:41] @snocone bcm43xx-fwcutter http://packages.ubuntu.com/cgi-bin/download.pl?arch=i386&file=pool%2Funiverse%2Fb%2Fbcm43xx-fwcutter%2Fbcm43xx-fwcutter_006-1_i386.deb&md5sum=7077056506c2f87bd7763310c150bc6e&arch=i386&type=main [08:41] nope [08:41] it will not work [08:42] thicknsexy, look for "start-stop-daemon" [08:42] MTecknology, it will work with it, you connect to something in wifi-radar and net-manager detects it [08:42] youknowme have you tried a reinstall? [08:42] @snocone try this one http://sidulus.textdrive.com/bcmwl5sys.zip [08:42] yjwong how do i do that [08:42] steveatlocalhost, I ran it in a terminal and got ** Message: GetValue variable 1 (1) [08:42] ** Message: GetValue variable 2 (2) [08:42] ** Message: GetValue variable 1 (1) [08:42] ** Message: GetValue variable 2 (2) [08:42] ** Message: GetValue variable 1 (1) [08:42] ** Message: GetValue variable 2 (2) === puppe [n=puppe@59.95.204.201] has joined #ubuntu [08:42] ** Message: GetValue variable 1 (1) [08:42] ** Message: GetValue variable 2 (2) [08:42] Segmentation fault (core dumped) === JuJuBee [n=JuJuBee@greenville.k12.ny.us] has joined #ubuntu [08:42] sorry, spam [08:42] youknowme: please stop === mode/#ubuntu [+o PriceChild] by ChanServ === youknowme [n=tom@75-121-156-63.dyn.centurytel.net] has left #ubuntu [requested] === mode/#ubuntu [-o PriceChild] by ChanServ [08:42] youknowme: of firefox? === Drevor [i=Drevor42@p54B3D274.dip.t-dialin.net] has joined #ubuntu === W_o_r[l] d [n=Psico@151.73.162.117] has joined #ubuntu [08:42] thicknsexy, you mean, start a program during system bootup? [08:43] I have a routing question (or 2). I have a network conected to a switch (few computers) and the switch connected to eth0 on a server. On the server, eth1 connects to my cable modem. From my computer (not this one) I can ping both interfaces on the server, but cannot get to google,com (by ip or dn). On the server, I can browse the net. Any ideas? [08:43] yes yjwong [08:43] hi all, i am installing an NIS client using Ubuntu, and this problem happen: YPBINDPROC_DOMAIN: Domain not bound [08:43] UrbenLegend: the first link was a 404. and were the second and third the same file? [08:43] JuJuBee you need to setup ipforwarding and an iptables rule to forward/masqurade packages === Iradigalesc [n=Iradigal@wikipedia/Iradigalesc] has joined #ubuntu [08:43] @snocone the second is bcm43xx-fwcutter the third is the same as the first file === Smygis [n=smygis@e611.cust.vannas.net] has joined #ubuntu [08:43] ikonia : I think I have it set up. [08:43] labmicro4 ok - your not bound to the domain - have you set the domain name ? [08:43] thicknsexy, all the scripts that start the programs on startup are stored in /etc/init.d [08:43] ok, I thought so [08:43] JuJuBee doesn't look like it [08:44] ikonia: 1 second, i'm at wirk...sorry [08:44] I've got some problems installing feisty in Virtualbox. It simply crashes... I google for the problem and it said, that it's because of der server kernel... So how can I install feisty server with the normal kernel? [08:44] http://www.openchrome.org/trac/browser/branches/vn896_branch?order=name can anyone make a deb file out of this repo? [08:44] ................. === youknowme [n=tom@75-121-156-63.dyn.centurytel.net] has joined #ubuntu [08:44] danielronin not a problem === manubonelli [n=manuele@host118-53-dynamic.56-82-r.retail.telecomitalia.it] has joined #ubuntu === slashzul [n=marti149@vcsom-114-42.csom.umn.edu] has joined #ubuntu === UB` [n=mik@85-18-201-169.ip.fastwebnet.it] has joined #ubuntu [08:44] Tominator you don't [08:44] yjwong please come channel jebus === At0mic_PC [n=arch_ato@host-216-78-69-155.jan.bellsouth.net] has joined #ubuntu [08:44] it comes with the server kernel === maringo [n=maringo@p54896751.dip.t-dialin.net] has joined #ubuntu [08:44] UrbenLegend: so I should stick those on a cd and do what exactly [08:44] ikonia, where i set ? i set the domain in yp.conf [08:44] thicknsexy, if you want to start a program when you login, use the System -> Preferences -> Sessions instead [08:44] how do you import a text file in openffice as a spreadsheet ? [08:44] labmicro4 do "domainname" see if its set [08:44] Hello alguem knows with configures the Interrogation in a Lenovo 3000 C200, therefore no layout of keyboard functions [08:44] ok [08:44] slacksurf pardon ? [08:44] brb i will restart this pc [08:44] ikonia: well probably yes [08:45] @snocone put them on a flash disk or something and transfer it to your ubuntu partition === nickspoon [n=nick@89.243.242.103] has joined #ubuntu [08:45] and then i hope it works [08:45] tho === Blazeix [n=fuquawa@137.112.138.96] has joined #ubuntu [08:45] Tominator no %100 === whtvr [n=whatever@87-198-17-86.ptr.magnet.ie] has joined #ubuntu [08:45] domain labix.rc.unesp.br server 200.145.39.113 [08:45] ikonia : any suggestions as to how-to for the iptables commands? [08:45] hey everybody [08:45] labmicro4 thats not what I said do === jessejazza [n=chatzill@86.156.234.6] has joined #ubuntu === factorx [n=asdf@dslb-084-060-035-121.pools.arcor-ip.net] has joined #ubuntu [08:45] labmicro4 I said show me the output of domainname [08:45] UrbenLegend: where should I put them [08:45] i kinda need some help [08:45] JuJuBee what is your rule your using [08:45] Is it possible to change the nice priority level of an already running process? [08:45] it's about wifi.... [08:45] @snocone anywhere on the flash disk it doesn't matter [08:45] Holly crap! [08:45] Blazeix man nice [08:45] yes [08:45] labmicro4@labmicro4-desktop:/etc$ domainname [08:45] labix.rc.unesp.br [08:45] New Ipod === svolpe [n=Gerrath_@unaffiliated/gerrath] has joined #ubuntu [08:46] labmicro4 ok - thats better [08:46] Im somewhat new to iptables, what do you mean? === Parisi drools === gcostello [n=gcostell@i07v-212-195-160-152.d4.club-internet.fr] has joined #ubuntu [08:46] no, where on the ubuntu partition [08:46] i'm havin a hard time connecting to my wireless network [08:46] is that domain running ok on the nis master ? [08:46] ikonia: well... perhabs but there is a kernel error... I think I do have a problem... === mariajose [n=mariajos@pc-58-43-45-190.cm.vtr.net] has left #ubuntu [] [08:46] Tominator you can't use the server release === Gerrath [n=Gerrath_@unaffiliated/gerrath] has joined #ubuntu [08:46] ilkonia : let me pastebin it... [08:46] brb [08:46] @snocone just install the bcm43xx-fwcutter deb and unzip the zip file and place that in your home directory [08:46] ikonia: I already read the man page for nice, and it says it runs the program as the specified level. The program is already running. === wib [n=jojo@dyndsl-091-096-040-083.ewe-ip-backbone.de] has left #ubuntu [] === ward_ [n=ward@103.53-67-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu [08:46] ikonia: okay... well that's not that good... [08:46] Blazeix so you do "nice $level $pid" === skipf [n=sfrizzel@206.180.161.243] has joined #ubuntu === preaction [n=doug@71-86-227-90.static.mdsn.wi.charter.com] has joined #ubuntu === onechard [n=chard@209.168.213.107] has joined #ubuntu === habtool [n=habtool@213-94-145-241.b-ras1.lmk.limerick.eircom.net] has joined #ubuntu [08:47] I guess I have to use debian then === mad_goldfish [n=madgoldf@cpc1-broo1-0-0-cust856.renf.cable.ntl.com] has joined #ubuntu [08:47] ok, I'll try. I'll be back [08:47] http://ubuntuforums.org/showthread.php?t=398122 === Riddick [n=pm@stefan.xtra.pl] has joined #ubuntu [08:47] a friend installed the CLI version trough the alternative xubuntu cd, then he isntalled xserver-xorg, xfonts-base and fluxbox [08:47] anybody know how to install that? === TelnetManta [n=benwilli@72.159.132.4] has joined #ubuntu === janfsd [i=JANFSD@plus.ds14.agh.edu.pl] has joined #ubuntu === Kraio-Yjasaaa [n=toxic@89.106.127.162] has joined #ubuntu [08:47] I hope 7.10 will support my vga card, via vn896... [08:47] but now no menuitems work, what does he need to do to get a menu with working buttons? === maringo [n=maringo@p54896751.dip.t-dialin.net] has joined #ubuntu === bsherman [n=bsherman@UNIX33.andrew.cmu.edu] has joined #ubuntu [08:48] ikonia, the server is in the same network. but someone told me that is necessary to register the client in the server. is it true ? === skathirgamu [n=skathirg@216.40.38.232] has joined #ubuntu [08:48] labmicro4 yes totally [08:48] hullo === wildur [n=wildur@1-2-2-8a.spa.sth.bostream.se] has joined #ubuntu === private_guy [n=private_@212.35.90.241] has joined #ubuntu [08:48] ikonia, how to register in the server ? === alan_ [n=alan@user-514d0f9c.l3.c1.dsl.pol.co.uk] has joined #ubuntu === GNine [n=gnine@c-24-99-14-101.hsd1.ga.comcast.net] has left #ubuntu ["ego] [08:48] <_Jaak_> is it normal that i have to enter my keyring password everytime network manager tries to connect to my network? === jamb [n=jamb@V5ea6.v.pppool.de] has joined #ubuntu [08:48] labmicro4 I'm a bit rusty but it is a command called "nis_client_setup" or smething like that === skathirgamu is now known as xerophyte === wyggler2 [n=wyggler2@user-0ce2jt0.cable.mindspring.com] has left #ubuntu [] [08:49] labmicro4: I'll see if I can dig it out === habtool [n=habtool@213-94-145-241.b-ras1.lmk.limerick.eircom.net] has joined #ubuntu === xdg [n=david@dsl254-073-076.nyc1.dsl.speakeasy.net] has joined #ubuntu [08:49] Hi there guys, i'm having a problem with my boot settings with is messing up Ubuntu, it thinks their is a windows vista which there isn't and i have formatted it.. So whats the solution of removing WIndows Vista from my boot menu because its not on the boot.ini as the new Vista uses BCD something like that, any suggests? === gjehle_ [n=gjehle@p5B17CAA4.dip0.t-ipconnect.de] has joined #ubuntu [08:49] *which is === Shadow_mil [n=shaddy@SilentFlame/Member/pdpc.active.Shadow-mil] has joined #ubuntu === foutrelis [n=foutreli@ppp191-17.adsl.forthnet.gr] has joined #ubuntu [08:49] I'm having the same vista problem [08:49] private_guy boot.ini - are you using windows ? [08:50] *Windows XP === froud [n=sean@dsl-242-191-75.telkomadsl.co.za] has left #ubuntu ["Konversation] [08:50] private_guy boot.ini is nothing to do with ubuntu [08:50] UrbenLegend: wait, that's an intel file [08:50] can some one help me with my sound i have a ultimedia audio controller: Ensoniq ES1370 [AudioPCI] [08:50] soundcarfd [08:50] card* [08:50] No, it wont boot anything except windows vista and XP because of it [08:50] private_guy: killdisk floppy will erase the entire hard drive === J_P [n=juliano@189.2.146.45] has joined #ubuntu [08:50] hi all [08:50] is that what you want? [08:50] Hello. I noticed that the alt+tab shortcut doesn't work anymore. Where should I go to fix this? [08:50] Hm my new laptop has 800mhz FSB, does that automatically mean it can handle 800mhz RAM? See, the specs says 667 mhz ram, but it's not obvious whether they mean just the included 2x1GBs or a limitation of the motherboard.. [08:50] private_guy are you using ubuntu ? [08:50] private_guy have you got grub installed [08:50] Yep [08:50] 7 :P [08:50] @snocone not an intel file, just a windows device driver [08:50] _Jaak_: look here - http://ubuntuforums.org/showpost.php?s=f5de5634f4448d733a599c23e4bb0257&p=2776815&postcount=1 === factorx [n=asdf@dslb-088-077-094-254.pools.arcor-ip.net] has joined #ubuntu [08:50] private_guy so why are you looking at boot.ini ? [08:50] @snocone thats why you got to use bcm43xx-fwcutter to cut out the firmware files [08:50] grub controlls your booting [08:51] People, I go to buy a nvidia video card. Could you recomend any good model to works fine in ubuntu... ? [08:51] Vista doesn't use boot.ini lol === calc [n=ccheney@conr-adsl-209-169-124-200.consolidated.net] has joined #ubuntu [08:51] I resized Vista with GPartEd and installed ubuntu 7.04, now when I try to start vista it says it is missing winload.exe [08:51] bionoid: #hardware [08:51] ok wait [08:51] <_Jaak_> Blazeix, thanks i will [08:51] J_P no nvidia works with ubuntu without reconfigureing the drivers for them [08:51] /leave/leave [08:51] private_guy what are you talking about, GRUB is the thing that controls your booting [08:51] Can someone help em with ultimedia audio controller: Ensoniq ES1370 [AudioPCI] [08:51] explain to me *exactly* what I need to do with these files and how to install them. I'm really confused === silwol [n=silwol@d91-128-236-90.cust.tele2.at] has left #ubuntu [] === Gnea [i=gnea@cpe-66-66-189-31.rochester.res.rr.com] has joined #ubuntu [08:52] @snocone did you install bcm43xx-fwcutter yet? === JamesD_ [n=james@host86-128-108-184.range86-128.btcentralplus.com] has joined #ubuntu === psyalex [n=alex@p549A6FD5.dip.t-dialin.net] has joined #ubuntu [08:52] @snocone double click on the bcm43xx-fwcutter and install it [08:52] no, I'm still in osx. I can't do anything until I restart, so I want to make sure I do it right [08:52] @snocone on your ubuntu system of course === psyalex [n=alex@p549A6FD5.dip.t-dialin.net] has left #ubuntu ["Ex-Chat"] [08:53] can some one help me with my sound card? [08:53] @snocone then after installing it go to your console [08:53] !sound | thicknsexy === boojah [n=boojah@ti231110a080-9123.bb.online.no] has joined #ubuntu [08:53] thicknsexy: If you're having problems with sound, first ensure ALSA is selected, by double clicking on the volume control, then File -> Change Device (ALSA Mixer). If that fails, see https://help.ubuntu.com/community/Sound - https://help.ubuntu.com/community/SoundTroubleshooting - http://alsa.opensrc.org/index.php?page=DmixPlugin - For playing audio files, see !Players and !MP3 === foutrelis [n=foutreli@ppp191-17.adsl.forthnet.gr] has left #ubuntu [] === sasharoar [n=sasha@pla93-5-88-176-12-7.fbx.proxad.net] has joined #ubuntu [08:53] irc.brainless-fr.net [08:53] .... [08:53] i cant click on the DAMN THING [08:54] I need to read an NTFS drive in Ubuntu 7.04 [08:54] thicknsexy: what video card you recommend ? [08:54] can someone help? [08:54] @snocone and type 'sudo bcm43xx-fwcutter -w /lib/firmware ~/home/username/bcmwl5.sys' === holymoly [n=new@mail.wjsgroup.com] has joined #ubuntu [08:54] drew2: reading is no problem [08:54] drew2 no problem, just mount it [08:54] drew: sudo apt-get install ntfs-3g [08:54] drew2: I believe the default install of ubuntu can read [08:54] J_p i dont recommend [08:54] kousotu he doesn't need to do that [08:54] drew2: you don't need ntfs-3g for read only [08:54] drew2 ignore that last command === Laggyware [n=Latty@host86-132-220-176.range86-132.btcentralplus.com] has joined #ubuntu [08:55] for some reason it isn't showing up though as a drive [08:55] It is partitioned on my computer [08:55] drew2 what disk is it on [08:55] drew2 eg: /dev/sda [08:55] ikonia: 3g is for read fuse is for write [08:55] /dev/sda2 [08:55] kousotu no its not [08:55] kousotu please don't say thing you don't understand === siloko [n=siloko@86.29.199.247] has joined #ubuntu === kurkoten [n=kurkoten@189.148.46.59] has joined #ubuntu === dgjones [n=Cheshire@unaffiliated/dgjones] has joined #ubuntu [08:56] J_P i dont know hardware that well i just know when my borther tryed to install ubuntu on his laptop when he booted his screen went black its not hard to fix just do research on them before installing ubuntu on them otherwise you will be stuck with no os === sa-net11 [n=sa-net11@202.174.134.76] has joined #ubuntu [08:56] @snocone after that the bcm43xx driver should be set up and ready to go [08:56] ikonia: don't go assuming I don't understad something [08:56] drew2: sudo mkdir /mnt/ntfs-test; mount /dev/sda2 /mnt/ntfs/test [08:56] kousotu you don't as you've just said something thats incorrect [08:56] UrbenLegend: thanks. hope it works [08:56] hey dudes does anyone have any experience writing udev rules as I can't seem to get ANY to invoke after a usb hotplug . . . [08:56] siloko done a few in my time, whats up === Nilber [n=neger@81-235-209-169-no62.tbcn.telia.com] has joined #ubuntu [08:57] ikonia: ok, whatever. you think you know it al fine, be my guest [08:57] drew2 that should also be sudo mount - sorry [08:57] !udev [08:57] Sorry, I don't know anything about udev - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi === zwik [i=zwik@cp85756-b.dbsch1.nb.home.nl] has joined #ubuntu [08:57] kousotu ntfs-3g is NOT for read access [08:57] ikonia: well i've written one to run a script when i plug in my usb hd, but it doesn't work and i don't know why === ticked [n=tkd@bas4-stcatharines10-1279408410.dsl.bell.ca] has joined #ubuntu [08:57] ikonia: i'll post the rule . . . hold on [08:57] does anyone know where ubuntu installs de SUN JDK 1.6 ? [08:57] siloko do you want to pop it in the pastebin and I'll take a look === Anders__ [n=chatzill@adsl-69-236-169-164.dsl.pltn13.pacbell.net] has joined #ubuntu === Dromar [n=david@pur31-1-82-224-15-167.fbx.proxad.net] has joined #ubuntu === ^_uhoh [n=infinity@CPE-70-92-64-28.new.res.rr.com] has left #ubuntu [] [08:57] @zwik /usr/java i think [08:58] ikonia: then tell me, why would it refuse to mount wthout 3g then? [08:58] zwik: /usr/lib/jvm, I think [08:58] kousotu user error ? [08:58] argh i am gonna have to get rid of the amd64 bit version and go to the I386 [08:58] a friend installed the CLI version trough the alternative xubuntu cd, then he isntalled xserver-xorg, xfonts-base and fluxbox === danielronin [n=ubuntu@76.206.19.220] has joined #ubuntu [08:58] but now no menuitems work, what does he need to do to get a menu with working buttons? [08:58] you think everything's my error [08:58] kousotu: you don't need ntfs-3g or fuse for reading ntfs, the linux kernel has an integrated driver for reading. === nanley [n=nanley@adsl-160-67-79.asm.bellsouth.net] has joined #ubuntu [08:58] It still does not show up as a readable drive === arnox [n=arnox@91.91.215.190] has joined #ubuntu [08:58] kousotu most of the time it is [08:58] drew2 hang on [08:58] drew2 so did those commands work ok ? [08:58] no [08:58] drew2 what error did you get [08:58] ikonia: http://paste.ubuntu-nl.org/36472/ [08:59] siloko give me a few minutes, just with someone else at the moment === dj_baggio [n=finarfin@yk66.internetdsl.tpnet.pl] has joined #ubuntu [08:59] First command worked fine [08:59] sorry ikonia: i unplugged eth0 for a sec and it wouldn't come back up [08:59] siloko I'll probably ask for tha url again in a minute [08:59] had to restart [08:59] siloko ok, thats gret [08:59] oops [08:59] the second one then says only root can do that, then I tacked on sudo === havocjoseph [n=joseph@72.166.40.13] has joined #ubuntu [08:59] now what did you want me to put in pastebin? [08:59] drew2 sudo mount /dev/sda1 /mnt/ntfs_test [08:59] danielronin: your disk layout [08:59] drew2 sudo mount /dev/sda2 /mnt/ntfs_test [08:59] fstab? [08:59] sorry my typo [08:59] drew2 yeah, thats a start [09:00] sorry [09:00] my pasting is messed up [09:00] java-6-sun java-6-sun-1.6.0.00 [09:00] which one is the jdk ? :+ [09:00] danielronin no, as that will be from the live cd [09:00] hi, anyone had try to download any audio from imeem using any linux script? [09:00] danielronin sudo fdisk -l $your disk === skipf [n=sfrizzel@206.180.161.243] has joined #ubuntu [09:00] i have just installed mod_perl. does anyone know how i can test if its working? === bauer [n=bauer@0x535ca889.banxx3.adsl-dhcp.tele.dk] has joined #ubuntu [09:00] zwik: it should add jdk as well === Adnan_ [n=Adnan@82-32-112-22.cable.ubr03.hawk.blueyonder.co.uk] has joined #ubuntu === Bixon [n=bixon@ajs188.internetdsl.tpnet.pl] has joined #ubuntu [09:00] nasso use something that wants it [09:00] zwik: java-6-sun is a symbolic link to java-6-sun-1.6.0.00 [09:00] i dont know how to ^_^ [09:00] <_Jaak_> my keyring creates a default keyring called default instead of my user name? [09:00] kousotu depends if you installed the jdk - thats not the default [09:00] okay, thanks a bunch === mailson [n=mailson@201008066135.user.veloxzone.com.br] has joined #ubuntu [09:00] im just installing it because i want apache::asp [09:01] @zwik the package should be called sun-java6-jdk and my bad it is /usr/lib/jvm === mon^rch [n=anonymou@S0106000fea33f1bb.cg.shawcable.net] has joined #ubuntu [09:01] hi guys i need some help with grub someone willing to help? i already know the basics but i think i am not adding the correct info to boot into my other distro ... cheers === gamerchick02 [n=gamerchi@dialup-4.165.171.124.Dial1.Detroit1.Level3.net] has joined #ubuntu [09:01] It says it is already mounted as /windows [09:01] Adnan_ be with you in a minute, just got a few others on the list first [09:01] drew2 great, so its already mounted [09:01] UrbenLegend: ty :) === VladimirBG [i=Vlad@89.216.196.145] has joined #ubuntu [09:01] ikonia: I''m not dealing with you. you can't admit that I just might know something thatyou don't [09:01] @zwik np [09:01] drew2 so if you view /windows in naultalius [09:01] but I cannot see it [09:01] drew2, then you can access your Windows partition through /windows, i guess === Carnage\ [n=carnage@Ybff3.y.pppool.de] has joined #ubuntu [09:01] ikonia thanks a lot [09:02] kousotu I don't know what your talking about === youknowme [n=tom@75-121-156-63.dyn.centurytel.net] has left #ubuntu [] [09:02] ikonia: http://paste.ubuntu-nl.org/36475/ [09:02] I'm confused === havocjoseph [n=joseph@72.166.40.13] has left #ubuntu [] [09:02] kousotu your just making incorrect comments and I'm explaining its wrong [09:02] I installed java on gutsy, JUST JAVA, and jdk came right besie it [09:02] does ubuntu have any widgets like Mac OS 10 does? === Bixon [n=bixon@ajs188.internetdsl.tpnet.pl] has joined #ubuntu [09:02] drew2 so your disk is already mounted the file system /windows [09:02] nevermind [09:02] I found it [09:02] danielronin be with you in a minute or two [09:02] great [09:02] thanks [09:02] drew2 fantastic [09:02] I did it through Firefox, so I know exactly what was chosen [09:02] np, just say when [09:02] @left1 you mean desktop widgets? [09:02] kousotu gusty is not 7.04 stable [09:02] ikonia : the iptables script is one I found and modified http://paste.ubuntu-nl.org/36474/ [09:02] @left1 try gdesklets [09:02] left1: you might look into the package gdesklets [09:03] kousotu and as you can see drew2 did not need ntfs-3g to mount his disk [09:03] i think i have it installed already but i dunno how to use it [09:03] ikonia: this is true, but the packages are merely dev versions for the most part === dgjones [n=Cheshire@unaffiliated/dgjones] has joined #ubuntu [09:03] kousotu in gusty yes - as its in development [09:03] kousotu not fesity === soothsayer [n=user@bas16-montreal02-1242357234.dsl.bell.ca] has joined #ubuntu [09:03] I've forgot who was next [09:04] ikonia: I would hav gona ahead and installed 3g, then not writen === wib [n=jojo@dyndsl-091-096-040-083.ewe-ip-backbone.de] has joined #ubuntu [09:04] who else was waiting for help, apologies [09:04] Is there a way to browse or list packages in a repository without adding it to my sources.list? [09:04] I am if you dont mind. [09:04] kousotu and thats why you don't understand what your doing and shouldn't give out incorrect advice === jarek_ [n=jarek@088156096010.stk.vectranet.pl] has joined #ubuntu [09:04] http://paste.ubuntu-nl.org/36474/ === danielronin raises hand [09:04] soothsayer: there is always packages.ubuntu.com [09:04] JuJuBee danielronin was first - I'll get to you [09:04] soothsayer, you can go to the URL of the repository === disinterested [n=green@75-164-153-212.ptld.qwest.net] has joined #ubuntu [09:04] danielronin go on, show me the link === VladimirBG [i=Vlad@89.216.196.145] has left #ubuntu ["Leaving"] [09:04] ikonia: also, Sun microsystems controls Java, not Can. (w/e the ubuntu dev compay is) [09:04] K === r3700L3r [n=r3700L3r@70.229.98.130] has joined #ubuntu [09:04] np [09:04] http://paste.ubuntu-nl.org/36475/ [09:04] Now that Ubuntu and Vista are installed, Vista says winload.exe is missing, anyone had any experience with this and I really need this fixed as it is a work computer === remi___ [n=reber@LNeuilly-152-21-126-73.w193-253.abo.wanadoo.fr] has joined #ubuntu === obf213 [n=timi@adsl-69-155-109-137.dsl.ksc2mo.swbell.net] has joined #ubuntu [09:04] yjwong: Not if it decides to show something different to web browsers [09:05] @kousotu its canonical [09:05] kousotu please stop saying things you don't understand, ubuntu packages sun java === puffy-san [n=centraln@dsl-jklgw3-fe14df00-200.dhcp.inet.fi] has joined #ubuntu [09:05] hi. How to install bzflag on ubuntu ? === Mido [n=antti@dsl-hkigw5-fe48de00-50.dhcp.inet.fi] has joined #ubuntu [09:05] yjwong: I guess I could mess around with user-agent... [09:05] Is there a place I can download other desklets? [09:05] @remi_ have you tried installing it through add/remove or synaptic? [09:05] "[14:04] kousotu and thats why you don't understand what your doing and shouldn't give out incorrect advice" it's not "incorrect, it differentthanwhat YOU would do [09:05] it seems that bzflag is *not* in ubuntu repositories === shrimants [n=chatzill@baits-209-97.reshall.umich.edu] has joined #ubuntu [09:05] soothsayer, yeah, certain sites refuse to show the index >_> [09:05] danielronin: which one of those partitions has /boot on [09:05] it would have the EXACT same outcome [09:05] remi__: it is in the repos: http://packages.ubuntu.com/feisty/games/bzflag === Mido [n=antti@dsl-hkigw5-fe48de00-50.dhcp.inet.fi] has left #ubuntu ["Ex-Chat"] [09:05] kousotu no - its incorrect advice [09:06] kousotu you don't NEED ntfs-3g to mount a read only NTFS disck [09:06] in your eyes only === godstorm [n=godstorm@static-71-245-48-23.sctnpa.east.verizon.net] has joined #ubuntu [09:06] yjwong: So is there a way without changing user-agent? [09:06] >_> will both of you stop for a moment, ikonia and kousotu [09:06] can somebody help with an nvidia problem, after a hard drive failure, i've done a reinstall and am trying to setup the nvidia driver without using envy etc, i've installed nvidia-glx-legacy, got everything working, glxgears works fine, but when I start xchat, the system freezes and I have to powerdown using the off switch, if i use the "nv" driver, the problem doesn't happen, any suggestions? [09:06] ok [09:06] @left1 http://www.gdesklets.de/ [09:06] i am piss off [09:06] Blazeix, any ideas, why it's not in feisty ""original"" repositories ? [09:06] ikonia: the nvidia modules seemed to work with the libc6 2.6.1.. if i get any problems i think i can just do the dpkg -i command on the original libc6 deb file [09:06] how do i get this to work === Born_In_Xixax [n=dstaudt@adsl-69-153-251-12.dsl.okcyok.swbell.net] has joined #ubuntu [09:06] soothsayer, not sure. The user-agent is validated by the server, so I guess there's no choice. [09:06] boojah depends whats linked against it [09:06] boojah: but yes, possibly === subzero2000 [n=subzero2@c-69-245-21-249.hsd1.tn.comcast.net] has joined #ubuntu === Azer [n=Azer@66-230-116-145-cdsl-rb1.nwc.acsalaska.net] has joined #ubuntu [09:06] i want to dual boot linux and xp. i want to be able to have My Documents and /home on one partition so that my files are always consistent between OS's. how should i partition my 160 gb hd? [09:06] @remi_ enable the universe repo [09:06] remi__: I'm not sure, by 'original' do you mean not the 'universe' [09:07] ikonia: what's the command to check the contents? [09:07] i get a "Starting HTTP Cache Cleaner..:" in the bottom panel from time to time running KDE applications like AmaroK in Gnome. How can i fix it? [09:07] being that it's not a dir [09:07] actually [09:07] nvm [09:07] hi, i would like to allow a regular user to execute a script that has some root-only commands (copying files in /etc for example)...how can I accomplish this? [09:07] danielronin: ahh this will be a drag for you, you need to "mount" the disks on a temporary file system and look at whats in them === b0ha [n=boha@89.142.57.226] has joined #ubuntu === ese5 [i=ese5@SDF.LONESTAR.ORG] has joined #ubuntu === timposey [n=timposey@63.161.232.50] has joined #ubuntu [09:07] danielronin why do you have so many partitions [09:07] so i need to mkdir and mount to them [09:07] ? [09:07] yjwong: Yes, obviously whatever I used would have to have an appropriate user-agent, I was hoping there was some console program that would handle all the mess for me === shrimants [n=chatzill@baits-209-97.reshall.umich.edu] has left #ubuntu [] [09:07] ikonia: [09:07] ? [09:07] danielronin yes, just somewhere like /mnt [09:07] godstorm what ? [09:07] shrimants, you could partition as per normal, and create a symbolic link for My Documents.... [09:08] @remi_ it should be in the repos otherwise just download from the ubuntu packages site [09:08] "[14:06] kousotu you don't NEED ntfs-3g to mount a read only NTFS disk" Where did I say it was NEEDED? === bolexxx [n=oke@83-131-188-67.adsl.net.t-com.hr] has joined #ubuntu [09:08] danielronin unmount them when you are done === slurpee [n=slurpee@DHCP-192-70.onshore.com] has joined #ubuntu [09:08] nvm you are helping some one [09:08] i will look for some one esle [09:08] then [09:08] kousotu just drop it and think about what advice your offering to people [09:08] um [09:08] soothsayer, I'm not sure of any such console programs. I create custom PHP scripts to fake User-agents :) [09:08] godstorm there is a queue, your welcome to join [09:08] Blazeix, aptitude search bzflag returns *nothing* === dd [n=dd@host-86-63-135-180.pronet.lublin.pl] has joined #ubuntu [09:08] does anyone know how to add a chinese keybord layout? I see practically every other country in the world in the list, but for some reason China/Taiwan is missing [09:08] wht is it [09:08] yjwong: Do you know what the user-agent of apt-get is? === kaosyouki [n=kaosyouk@213.172.246.220] has joined #ubuntu [09:08] danielronin: that will take you a hile so I'll look at JuJuBee's issue while your checking [09:09] JuJuBee: post the script please === satan [n=satan@bgn92-4-82-238-215-105.fbx.proxad.net] has joined #ubuntu [09:09] or the url to it === Knopf [n=ingo@dslb-088-074-041-173.pools.arcor-ip.net] has joined #ubuntu [09:09] http://paste.ubuntu-nl.org/36474/ === Knopf [n=ingo@dslb-088-074-041-173.pools.arcor-ip.net] has left #ubuntu ["Ex-Chat"] [09:09] @remi_ it should be in the universe repo see if you have it disabled or something [09:09] ikonia: you think about it. justbecause it's different done NOT make it wrong [09:09] @remi_ or just download it from here http://packages.ubuntu.com/cgi-bin/search_packages.pl?keywords=bzflag&searchon=names&subword=1&version=feisty&release=all [09:09] soothsayer, no idea. You (or maybe me) could try using Wireshark. Anyway I'm keen to explore too :P === bentob0x [n=laurent@ip-213-49-72-111.dsl.scarlet.be] has joined #ubuntu [09:09] kousotu I'm not going into it, but giving out incorrect and potentially dangerous advice is not a good idea [09:09] UrbenLegend, no, i haven't disabled it. It's a fresh festy install. I'm o.O === dd [n=dd@host-86-63-135-180.pronet.lublin.pl] has joined #ubuntu === dd [n=dd@host-86-63-135-180.pronet.lublin.pl] has left #ubuntu ["Ex-Chat"] [09:09] ikonia: again, it's not WRONG ADVICE === zwik [i=zwik@cp85756-b.dbsch1.nb.home.nl] has left #ubuntu [] === RichterSkala^lnx [n=lorenz@p54A05D26.dip.t-dialin.net] has joined #ubuntu [09:10] kousotu its potentially dangeours advice [09:10] based on a lack of understanding [09:10] ikonia : from outside, I can hit my webserver and I can ssh to the server then to a device on my network. From inside, I can ping/http the webserver. I can ping hte external NIC interface, but cannot ping/http anything outside. [09:10] ikonia: only if used incorectly. AKA USER ERROR === b0ha [n=boha@BSN-142-124-107.dial-up.dsl.siol.net] has joined #ubuntu [09:10] JuJuBee ok - I think I see a few problems, just working it through === ticked [n=tkd@bas4-stcatharines10-1279408410.dsl.bell.ca] has left #ubuntu [] [09:10] @remi_ try synaptic instead of aptitude, i am not sure if this matters but try it anyway, cuz its def in my repos [09:10] Ok, like what? [09:11] :( very weird ... === obf213 [n=timi@adsl-69-155-109-137.dsl.ksc2mo.swbell.net] has joined #ubuntu === obf213_ [n=timi@adsl-69-155-109-137.dsl.ksc2mo.swbell.net] has joined #ubuntu === krychek [n=krychek@catv-5062b89c.catv.broadband.hu] has left #ubuntu [] [09:11] JuJuBee: join me in #ubuntu-offtopic as this isn't really an ubuntu problem [09:11] ikonia: you can code in a thousanddifferent ways, it will have the same end result === ConstyXIV [n=Andrew@74-128-189-16.dhcp.insightbb.com] has joined #ubuntu [09:11] K [09:11] ikonia: http://paste.ubuntu-nl.org/36477/ [09:11] umm [09:11] @remi_ if you can't see it easiest way is just to download them from the link i gave you and install it by hand [09:11] hi. i updated the linux-headers. now the soundcarddrivers don't work anymore. i tried almost everything exept compilin and installing alsadrivers... i reinstalled all alsa-related packages though... [09:11] ikonia: wht the channel name bro [09:11] it's /dev/sda5 judging by the contents === KlrSpz [n=johng@66-193-248-206.static.twtelecom.net] has joined #ubuntu [09:12] so what's the vnc of choice for sharing sessions? === Thegeektechnique [n=geek@ip70-178-247-42.ks.ks.cox.net] has joined #ubuntu [09:12] !vnc [09:12] VNC is a protocol for remote desktop. https://help.ubuntu.com/community/VNCOverSSH describes how to use it securely. It works best over fast connections, otherwise look at !FreeNX [09:12] danielronin I'll get back in a mo === oizo [n=oizo@4104ds2-abc.0.fullrate.dk] has joined #ubuntu [09:12] ikonia: np [09:12] tightvnc-server will not work as it only works with a fresh session [09:12] can somebody help with an nvidia problem, after a hard drive failure, i've done a reinstall and am trying to setup the nvidia driver without using envy etc, i've installed nvidia-glx-legacy, got everything working, glxgears works fine, but when I start xchat, the system freezes and I have to powerdown using the off switch, if i use the "nv" driver, the problem doesn't happen, any suggestions? [09:12] (ie, I can't resume a live session0 [09:13] remi___: Section: universe/games === tarvid [n=tarvid@dpc6935139037.direcpc.com] has joined #ubuntu [09:13] dgjones, check you have the right driver, it may not be the legacy [09:13] soothsayer, got the user-agent [09:13] remi___: try apt-cache search bzflag === dsl1388 [n=dsl@host86-151-58-106.range86-151.btcentralplus.com] has joined #ubuntu === KevinOman [n=kevin@66-227-221-83.dhcp.klmz.mi.charter.com] has joined #ubuntu [09:13] UrbenLegend, i don't like the idea of downloading a .deb as it *should* work. Do i have to add something on the sources.list UrbenLegend ? [09:13] yjwong: Beat me [09:13] praet, are you prae ? === JamesTimbo [n=brandon@c-68-34-224-91.hsd1.md.comcast.net] has joined #ubuntu [09:13] yjwong: Still looking at ngrep man page :) [09:13] remi___: nope. [09:13] Born_In_Xixax, the user need to run the script with "sudo". then in /etc/sudoers add a line that say: username ALL=NOPASSWD: /path/to/your/script (example, I want a user to be able to "halt" (and this is the only admin command he is allowed to use) the machine without requireing a password: adminuser123 ALL=NOPASSWD: /sbin/halt ) [09:13] ikonia: I dare you to tell me that statement is wrong [09:13] soothsayer, it is "Ubuntu APT-HTTP/1.3 (0.6.46.6ubuntu10)" [09:13] :D [09:14] yjwong: Thanks [09:14] how does one get abiword to print directly to a printer from the command line? === ^_Just|n_^ [n=justin@mctnnbsa24w-142167046132.pppoe-dynamic.nb.aliant.net] has joined #ubuntu [09:14] what package do I need to build debs? [09:14] ngrep? Isn't that grep -n? [09:14] remi___: if you just enabled universe make sure to apt-get update === ^_Just|n_^ [n=justin@mctnnbsa24w-142167046132.pppoe-dynamic.nb.aliant.net] has left #ubuntu ["Ex-Chat"] [09:14] @remi__ well its a default feisty install so the source should be there. What about from add remove in your main menu [09:14] kousotu this is offtopic nonsense that I'm not going to discuss === ansque [n=user@dcp233.neoplus.adsl.tpnet.pl] has joined #ubuntu [09:14] Born_In_Xixax, so either use "sudo" inside the script or make the script executable by root only. [09:15] Jowi, sounds like exactly what I need many thanks :) [09:15] remi___: also, check system > administration > software sources [09:15] ikonia: bull, it's righton targt, you're just too stupid, bullheaded, ignorant (pick one) to admit it === n00dl3 [n=ctrlx@c-66-176-40-185.hsd1.fl.comcast.net] has joined #ubuntu === boblzer0 [n=bobl@c-71-197-23-69.hsd1.mi.comcast.net] has joined #ubuntu [09:15] kousotu: just drop it, ikonia had the best answer, since it didn't require installing something that the user didn't have to use. === JamesTimbo [n=brandon@c-68-34-224-91.hsd1.md.comcast.net] has left #ubuntu ["Ex-Chat"] === bolexxx [n=oke@83-131-188-67.adsl.net.t-com.hr] has left #ubuntu [] === kboite [n=kboite@aut75-3-82-227-118-130.fbx.proxad.net] has joined #ubuntu [09:15] ikonia, now i run rpcinfo -u labix ypserv [09:15] and the error stop. [09:15] is there something like envy but for sound card drivers? === Sembiance [n=Sembianc@permafrost.telparia.com] has joined #ubuntu [09:15] ompaul, legacy is supposed to be the right driver, the card is an geforce 2 go - quite an old one [09:15] Blazeix: but he did not have the ONLY answer [09:15] Blazeix: hence my point [09:15] ikonia, i try to run yptest [09:16] labmicro4 NICE find === fredddy [n=freddy@p3E9E34DB.dip0.t-ipconnect.de] has joined #ubuntu === chickenF [n=chicken@Lcae5.l.pppool.de] has joined #ubuntu [09:16] praet, as i already said, apt* search bzflag returns nothing. It's a fresh feisty install, and no i didn't enabled no uni/multi/whatever verse. [09:16] thats the stuff === Aminux [n=chatzill@bl7-254-136.dsl.telepac.pt] has joined #ubuntu [09:16] I'd like to install Ubuntu on a MacPro. Does 7.0.4 support this? === \x6e\x65\x72\x64 [n=gaucho@201-66-203-28.smace700.dsl.brasiltelecom.net.br] has joined #ubuntu === Lattyware [n=Latty@host86-132-220-176.range86-132.btcentralplus.com] has joined #ubuntu [09:16] kousotu, bad point, there is a safe way to do it, yours was not it, here you are helping new users [09:16] Born_In_Xixax, be abit careful though. make the script read-only. [09:16] flame wars in a help channel are really dull . . . sort it out guys :) [09:16] Blazeix: I stated what I wold do, he stated what he would do [09:16] @remi8__ you didn't enable universe? i thought you said you did === mariqn [n=mariqn@89.25.18.11] has joined #ubuntu [09:16] No, another answer would be to install ntfs-3g, then reinstall it 5 times. It would technically have worked, but it is still wrong === drew2 [n=drew@EV-ESR-74-215-26-146.fuse.net] has left #ubuntu [] [09:16] do apt-cache search bzflag* === mode/#ubuntu [+o ompaul] by ChanServ [09:16] and the test stop in the second stage: Test 2: ypbind [09:16] Can't communicate with ypbind [09:16] Hello, I've deleted accidentally with maj+suppr some files, does anybody know a free ext3 data recovering solution? [09:17] hi,is it possible to read/write on windows from Ubuntu? [09:17] Blazeix: no,if it works, it's not wrong [09:17] kousotu, drop it === puppe [n=puppe@59.95.204.201] has left #ubuntu [] [09:17] Born_In_Xixax, correction: read and execute only by root [09:17] sorry maj+del (suppr is the french word) [09:17] http://lwn.net/Articles/248227/ AMD to open up graphics specs [09:17] remi___: check system > administration > software sources make sure universe is enabled === mode/#ubuntu [-o ompaul] by ChanServ [09:18] remi___: the default install may have universe disabled by default [09:18] danielronin: ok - I'm back with you now [09:18] danielronin: apologies for the delay, juggling a bit much [09:18] ikonia, an question, wih the rpcinfo, is the client registered in the server, or not yet ? [09:18] gee anybody ever get abiword to do a mail merge? [09:18] so what's the vnc of choice for sharing sessions? tightvnc-server won't work as it requires it's own xsession, I want to resume a live session (for sharing, etc) === coredata [n=coredata@12-207-224-107.client.mchsi.com] has joined #ubuntu === tlucas [n=tom@saintjohns.demon.co.uk] has joined #ubuntu [09:18] ikonia: np, i appreciate the help. btw did you get the paste of the /dev/sd5 contents [09:18] labmicro4 rpcinfo means the server responded to it, doesn't mean its registered as I remember [09:18] Born_In_Xixax, for more advance setup see "man sudoers" === g0ju [n=moo@dslb-088-072-167-193.pools.arcor-ip.net] has joined #ubuntu [09:18] praet, i haven't the pc on my hands. But i'll check tomorrow. Weird that universe isn't enabled by default on feisty ... === G3R [n=germanp@53-148-235-201.fibertel.com.ar] has joined #ubuntu [09:19] danielronin: to be certain, go into where you mounted /dev/sda5 and do "ls -la ./boot/grub/menu.lst [09:19] ikonia, well, the answer was good :) === daedra [n=dsl@host86-151-58-106.range86-151.btcentralplus.com] has joined #ubuntu [09:19] umm === tlucas [n=tom@saintjohns.demon.co.uk] has left #ubuntu [] [09:19] test [09:19] :) === Er_39 [n=jars@dslb-088-077-021-180.pools.arcor-ip.net] has joined #ubuntu === SlimySS [n=root@202.1.194.121] has joined #ubuntu [09:19] labmicro4 I'm rusty on legacy nis, so don't take what I say as fact [09:19] just from memory === radhios [n=radhios@unaffiliated/radhios] has joined #ubuntu [09:19] ikonia: === G3R [n=germanp@53-148-235-201.fibertel.com.ar] has left #ubuntu [] [09:19] wht the channel bro === G3R [n=germanp@53-148-235-201.fibertel.com.ar] has joined #ubuntu [09:19] remi___: make sure it is enabled, then apt-get update to pull the new availible packages, then apt-get install bzflag is all yours :) [09:20] godstorm what channel ? [09:20] to get help [09:20] here [09:20] ikonia, ok, but you are helping me a lot !!!! [09:20] bzflag, my preeeeciiiiiouuus ;) [09:20] on the one i need === recover [n=recover@90-227-222-77-no62.tbcn.telia.com] has joined #ubuntu [09:20] Hi, Can someone please tell me how to regenerate ubuntu after i've removed a harddisk on which ubuntu is installed [09:20] praet, thanks for your help [09:20] remi___: Its worth the effort to get it from packages rather than a deb file [09:20] labmicro4 if you can wait a few hours (big ask I know) I can sort you out properly when I get home to a nis box [09:20] godstorm this is ubuntu support === Luke [n=Luke@74-132-228-30.dhcp.insightbb.com] has joined #Ubuntu [09:20] whenever i try booting from grub, it says disk not found [09:20] ok [09:20] well [09:20] umm [09:20] @praet aren't packages and deb files the same thing? [09:20] praet, course, yep, 8 years debian user :) === Etppk [n=eddie@201.229.140.85] has joined #ubuntu [09:20] but i've checked the devices.map and it seems to be well in order [09:20] SlimySS is the ubuntu disk still in your system [09:20] the alsa is set up === Latty [n=Latty@host86-132-245-140.range86-132.btcentralplus.com] has joined #ubuntu [09:21] " to be certain, go into where you mounted /dev/sda5 and do "ls -la ./boot/grub/menu.lst" [09:21] ikonia when you're free just message me with my name ok ? thanks a lot much appreciated === loca| [n=tux@196.203.53.221] has joined #ubuntu [09:21] is that supposed to have the . ? [09:21] Adnan_ keep reminding me [09:21] danielronin yup [09:21] ikonia ok [09:21] or just do "ls -la boot/grub/menu.lst [09:21] " [09:21] ikonia: i can get it in there. right now I am using gentoo.livecd and am in chroot environment (ubuntu /) === Keule|On [n=keule@p57BBE153.dip.t-dialin.net] has joined #ubuntu [09:21] SlimySS if you don't have the disk in your system - your grub install will not work [09:21] -rw-r--r-- 1 root root 5067 2007-09-03 00:30 ./boot/grub/menu.lst [09:21] ok we're good [09:22] danielronin mega [09:22] UrbenLegend: yes i meant to use a package manager to install [09:22] danielronin: now comes a slightly tricky part [09:22] hi there... i installed anything - and now my usb devices wont work [09:22] danielronin do you remember doing the "root(hd0)" stuff before [09:22] maybe it was the tv-card setup [09:22] from the grub prompt? [09:22] could anyone help me? [09:22] I'm using a microSD card in an usb card reader. I just put some files on it and then tried to unmount it, but it wouldn't. Then I tried restarting X with ctrl+alt+backspace and then unmounted the card. I know you're supposed to unmount it before pulling out the card to prevent data loss. So my question is: Did restarting X somehow prevent the files being written, or is the data flushing managed elsewhere? [09:22] danielronin yup === furesta [n=furesta@adsl-170-205.38-151.net24.it] has joined #ubuntu === vitaepe2008 [n=vitaepe@190.40.137.114] has joined #ubuntu === vitaepe2008 [n=vitaepe@190.40.137.114] has left #ubuntu ["Saliendo"] === wib [n=jojo@dyndsl-091-096-040-083.ewe-ip-backbone.de] has left #ubuntu [] === Laggyware [n=Latty@host86-141-180-9.range86-141.btcentralplus.com] has joined #ubuntu [09:23] yes but i don't remember the output === mon^rch [n=anonymou@S0106000fea33f1bb.cg.shawcable.net] has joined #ubuntu === spanks [n=danny@c-68-84-18-144.hsd1.fl.comcast.net] has joined #ubuntu [09:23] ikonia: ok, can you give me a few hints on where to go from there- i.e. once i've got the feisty live.cd inside the CDROM? [09:23] Jowi, working great thanks. Do you happen to know the command to halt and power down the pc from the command line? Is it just halt? [09:23] SlimySS you just need to re-install [09:23] danielronin thats fine === profanephobia [n=profanep@74-131-141-126.dhcp.insightbb.com] has joined #ubuntu === griznok [n=tootoo31@bzq-84-109-100-8.red.bezeqint.net] has joined #ubuntu [09:23] danielronin can you make some notes as this screen will scroll [09:24] how can i reactivate my usb-ports??? [09:24] absolutely [09:24] danielronin ok [09:24] danielronin sudo grub [09:24] danielronin puts you ito the grub shell === Jakyle [n=JJackson@c-98-200-40-174.hsd1.tx.comcast.net] has joined #ubuntu === BlehBleh [n=jwgreene@pool-68-238-59-165.port.east.verizon.net] has joined #ubuntu === Jack_Sparrow [n=jack@adsl-69-227-94-40.dsl.sndg02.pacbell.net] has joined #Ubuntu [09:24] /channellist [09:24] Born_In_Xixax, "halt", "shutdown" (example "shutdown -h now"), "reboot". [09:24] reinstall? but why'd I want to do that? isnt there an easier way? i've just installed a lot of software :( === Tominator [n=thomas@p54A962BC.dip.t-dialin.net] has left #ubuntu [] [09:24] danielronin then you want the root - which according to your disk layout should be /dev/sda5 so "root (hd0,4)" [09:24] (well i sudo -s, so justgrub then ;) ?) [09:24] danielronin with me so far [09:24] SlimySS: do you have a hard drive in the system? === sgkl [n=sgkl@59.92.203.196] has joined #ubuntu [09:25] SlimySS you've told me the ubuntu hard disk is not in th drive === Pretoriab [n=Pretoria@80-193-44-104.cable.ubr07.enfi.blueyonder.co.uk] has joined #ubuntu [09:25] is not in the system [09:25] who here is [09:25] know about === SmoothOp [n=no@c-71-58-57-168.hsd1.pa.comcast.net] has joined #ubuntu === capiira [n=capiira@dslb-088-065-195-103.pools.arcor-ip.net] has joined #Ubuntu [09:25] Born_In_Xixax, if you use /etc/sudoers for the commands be sure to put the full path to the command in there. "which halt" will tell you the path to "halt" [09:25] Sound.s [09:25] hi, I am a freshmen in college, majoring in Computer Science, and my advisor told me to to start with Ubuntu, but I am having trouble installing it === arnox [n=arnox@91.91.244.236] has joined #ubuntu [09:25] hello - how can i reactivate my usb ports [09:25] I'm wondering it anyone has had usb issues with Asus P5B? My devices offline whenever they feel like it and it seems pretty universal, ipod, flashdrives and hdds over usb. Chipset is USB Controller: Intel Corporation 82801H (ICH8 Family). [09:25] danielronin: you with me so far ? [09:26] yup [09:26] ok - [09:26] Jakyle: what part are you having trouble with? [09:26] Jowi, actually it worked as just 'sudo halt' [09:26] i'm good === i3d [n=i3dmaste@unaffiliated/i3dmaster] has joined #ubuntu [09:26] Jakyle, just state your exact problem :) [09:26] danielronin: so that "should" be ok, now you want to apply that to the boot sector of your boot disk so - "setup (hd0)" === hiker1352 [n=hiker135@c-67-167-68-228.hsd1.il.comcast.net] has joined #ubuntu [09:26] ok, lemme clear things up, i've got the harddisk with ubuntu / on one harddisk. now the harddisk (primary master) on whose MBR ubuntu installed grub is not there. === Phydoux [n=Phydoux@dpc674763221.direcpc.com] has joined #ubuntu === Lucifer [n=Lucifer@88.228.184.176] has joined #ubuntu [09:26] lol, well when I start installing it, it get a message saying hd01 is blocked [09:26] How do I boot from a live cd to just a shell? [09:26] does anyone read my messages? [09:26] godstorm, you can ask in #alsa but before you do make sure you read the topic for the channel and do all it says === mac2612 [n=forrie@pool-71-243-158-232.buff.east.verizon.net] has joined #ubuntu [09:26] SlimySS ahh so you just need to re-apply grub [09:26] ok [09:27] !grub >SlimySS [09:27] it still means that if I am able to point grub to the harddisk I have / (ubuntu) on, then It'll see the installation, wont it. [09:27] whats the preferred irc client for most people [09:27] irssi [09:27] SlimySS sorry, I totally missunderstood === webmaren [n=webmaren@pool-72-85-3-254.bltmmd.east.verizon.net] has joined #ubuntu [09:27] spanks: irssi === Kacper [n=michal@host-ip240-131.crowley.pl] has joined #ubuntu [09:27] thanks === age6racer [n=age6race@89.243.127.191] has joined #ubuntu [09:27] Keule|On, Someone will help you if they can, you just gotta be patient. [09:27] hi all, I havve t [09:27] spanks, lots of different ones - xchat irssi konversation depending on the person === tapoxi [n=ted@69.43.65.27] has joined #ubuntu [09:27] heh. ikonia alrighty. now we're getting somewhere. and really, my fault describing the problem. thanks. [09:27] thanks =) [09:27] SlimySS: try looking here - http://ubuntuforums.org/showthread.php?t=24113 [09:27] because gaim is terrible [09:27] whoops. I'm having trouble with rt2500 drivers and ndiswrapper [09:27] anyone know of a vnc viewer for linux? [09:27] Can you boot from a live cd to just a shell? [09:27] can anyone help me? [09:28] age6racer, Hold up I may have a link for you.. [09:28] danielronin: did you get all that ? [09:28] Hello, I installed Ubuntu Restricted Extras, but I can't play back AAC files? [09:28] age6racer, Have you tried the serial monkeys driver? [09:28] Jakyle, I'm not too sure of this problem - possibly also specify which CD you are using? (desktop or alternate) === jose_D [n=jose@pac33-1-82-235-251-221.fbx.proxad.net] has joined #ubuntu [09:28] but so far the only command i've entered at "grub" is "root (hd,4), right? [09:28] desktop [09:28] shifty-, click on applications - internet and then choose terminal server client [09:28] @tapoxi did you install all the gstreamer plugins? [09:28] shifty, there is one installed by default: 'vncviewer ip_address:0' [09:28] shifty-: Applications>Internet>Terminal Server Client [09:28] shifty-, Ubuntu comes with a VNC viewer [09:28] thanks [09:29] I burned the image using the suggested software on the site === freerise [i=1000@dialup-4.238.219.39.Dial1.Philadelphia1.Level3.net] has joined #ubuntu [09:29] UrbenLegend: Just Ubuntu Restricted Extras, what else should I install? [09:29] ndsiwrapper -l gives the following: driver present device (1814:0201) present (alternative driver; rt2500) [09:29] (hd,4) would not be correct === marlun [n=marlun@unaffiliated/marlun] has joined #ubuntu === Mr [n=Peter@fl-65-40-37-166.sta.embarqhsd.net] has joined #ubuntu [09:29] Jakyle, is that after or before the menu comes out? [09:29] Can ubuntu live cds boot to just a shell? or is there adiff distro that will? [09:29] yjwong: I gave a VNC question if you can help...is anyone familiar with a video capture program to record desktop...I grabbed Xvidcap but it seems to run poorly with an X600 and P4 3.00 Ghz...is it better to record through VNC [09:29] danielronin: yup so grub to get you into the shell, then root (hd0,4) [09:29] then enter [09:29] then setup (hd0) [09:29] then enter [09:29] then exit [09:29] Gave = have [09:29] then reboot and lets see what you get [09:29] age6racer, I'm not sure about the ndis way but there are real drivers being worked on: http://rt2x00.serialmonkey.com/wiki/index.php?title=Main_Page [09:29] danielronin, and remove the liveCD [09:29] ompaul nice spot ! [09:29] the menu comes up just fine, and it gives me the options to open ubunuto in safe mode, to verify if it is safe, and of course, the top option, to install [09:30] mcsd, not too sure, but I'm using XVidcap too === Mr is now known as wetware1967 [09:30] ikonia, well I am not being busy :) [09:30] I install it, ubunto starts to load, then it says that hd01 is blocked or something === irvken [n=sean@82-46-25-42.cable.ubr01.hawk.blueyonder.co.uk] has joined #ubuntu [09:30] performance is better for one small window, but if the whole desktop were to be captured >_> [09:30] if you would like, I can try to install it again and write down the exact message I am getting [09:30] tapoxi: https://help.ubuntu.com/community/RestrictedFormats/AAC [09:30] @tapoxi all the gstreamer plugins [09:30] @tapoxi including the bad and ugly ones === grlubb [i=grlubb@c-75-67-72-224.hsd1.ma.comcast.net] has joined #ubuntu [09:30] Jakyle, in that case you should copy the exact message, or use the Alternate CD [09:30] i've found passing xvrefresh and xhrefresh and xmodule on the boot: options line (F6) helps the installer [09:30] nandemonai: I know, I had those (half working) but I can only connect to certain networks. === tarvid [n=tarvid@dpc6935139037.direcpc.com] has left #ubuntu ["Leaving"] [09:30] yjwong: is there a way to just record the desktop instead of drawing an area...I ask because it doesn't record my skybox [09:31] okay, ill brb in five minutes... [09:31] I was hoping that ndiswrapper would fix this [09:31] note that i'm going to sleep soon, Jakyle === freerise [i=1000@dialup-4.238.219.39.Dial1.Philadelphia1.Level3.net] has left #ubuntu [] [09:31] :P [09:31] ikonia: that sounds like what i did earlier when i logged off, and i got the same error from GRUB === lodein [n=toto@adsl-pool-222.123.86-87.tttmaxnet.com] has joined #ubuntu === snocone [n=Anon@216-67-50-115-cdsl-rb2.cwc.acsalaska.net] has joined #ubuntu [09:31] danielronin well, lets see, [09:31] you have time for five minutes? [09:31] age6racer, Ahh okies sorry can't help you then :/ I had issues too and am using a different chipset now. [09:31] ikonia: will do [09:31] Vlet: thank you very much! [09:31] @snocone did it work? === tapoxi [n=ted@69.43.65.27] has left #ubuntu [] [09:31] Jakyle, it's OK === riaal [n=riaal@87.96.195.71] has joined #ubuntu === JuJuBee [n=JuJuBee@greenville.k12.ny.us] has left #ubuntu ["TTFN"] [09:31] brb [09:31] no, it said the package was for i386. how do I install it? === |oopingz [n=loopingz@home.loopingz.com] has joined #ubuntu [09:31] anybody else here have experience with ndiswrapper?? === oslo [n=oslo@alf94-5-82-225-102-119.fbx.proxad.net] has joined #ubuntu [09:32] mcsd: have you tried recordmydesktop? [09:32] danielronin the problem you've got is you've changed the partition table, so I'm not sure how rub will react to that, you could need root (hd0,4) OR maybe root (hd0,5) IF it still thinks there is the old partition [09:32] @snocone oh you're not i386? [09:32] danielronin: if you see what I mean === annihilus [n=annihlus@loudsl01-dyn-253-114-181.iglou.com] has joined #ubuntu [09:32] age6racer: Only bad experiences... :) === |oopingz [n=loopingz@home.loopingz.com] has joined #ubuntu [09:32] @snocone which processor do you have? [09:32] no, powerpc. :o === bullgard4 [n=detlef@p54BF0775.dip0.t-ipconnect.de] has joined #ubuntu [09:32] @snocone oh [09:32] lol, yeah me too. [09:32] Anyone using ktrorrent? === boblzer0 [n=bobl@c-71-197-23-69.hsd1.mi.comcast.net] has joined #ubuntu [09:32] @snocone DOPE! [09:32] wtf [09:32] no one there to help [09:32] why doesn't anyone make a gnome-version of k3b? It's the best burning tool ever... === gazzerh [n=garryh@host-212-158-227-149.bulldogdsl.com] has joined #ubuntu [09:32] godstorm easy on the phrase, its not regarded as nice language [09:32] age6racer: What hardware do you have? === genii sips a coffee and thinks about Acorn partitions [09:33] but you said it would work anyway? [09:33] oh [09:33] lol [09:33] srry [09:33] dgjones, so click on system System Restricted Drivers Manager and use that [09:33] @snocone http://packages.ubuntu.com/cgi-bin/download.pl?arch=powerpc&file=pool%2Funiverse%2Fb%2Fbcm43xx-fwcutter%2Fbcm43xx-fwcutter_006-1_powerpc.deb&md5sum=eeddbe243c5e053f2d15cf463cb02486&arch=powerpc&type=main [09:33] i am like mad [09:33] tho [09:33] godstorm, shhhh please [09:33] godstorm I know , I know === NickPresta [n=nickpres@CPE000625f47ed2-CM0011e6c456e3.cpe.net.cable.rogers.com] has joined #ubuntu === sgkl [n=sgkl@59.92.203.196] has joined #ubuntu === jamb [n=jamb@V5ea6.v.pppool.de] has joined #ubuntu === TSWoodV [n=woodt@63.148.180.182] has joined #ubuntu === davee__ [n=dave@80.54.27.43] has joined #ubuntu [09:33] it's an onboard adapter in my laptop [09:33] yjwong: capture success ratio 19.50%....blah === |oopingz [n=loopingz@home.loopingz.com] has left #ubuntu ["Ex-Chat"] [09:34] What is the latest verion of kTorrent? And how do I get it? Not apt-get..? [09:34] ompaul, give me a sec while i try it === Devote [n=devote@30.213-243-81.adsl-dyn.isp.belgacom.be] has joined #ubuntu [09:34] godstorm: what's up? why mad? [09:34] ok, I shall return :) [09:34] lol, i'm getting the same rate too if my resolution is 1650 x 1080 [09:34] riall: latest ktorrent is 2.2.2, it looks === ubuntu09 [n=ubuntu09@c-68-35-90-204.hsd1.nm.comcast.net] has joined #ubuntu [09:34] is it possible to boot just a shell from the live cd? [09:34] ok bro [09:34] ikonia: i get what you're saying, i think grub still thinks the old partition is there === squee [n=squee@ip68-228-228-224.ph.ph.cox.net] has joined #ubuntu [09:34] i like Liunxs alot [09:34] tho [09:34] ok [09:34] Tient quelqu'un connais les nouveauts de gnome 2.20 ? === nanonyme [n=siylioll@kirves.hut.fi] has joined #ubuntu === richard [n=richard@nblzone-208-40.nblnetworks.fi] has joined #ubuntu [09:35] riaal, latest version is 2.2.2 [09:35] danielronin try root (hd0,5) [09:35] root@ubuntu-laptop:/home/ubuntu/Desktop# ./configure libdvdread-0.9.7.tar.gz [09:35] bash: ./configure: No such file or directory [09:35] can someone tell me what im doing wrong? [09:35] but the sound card only uses one app [09:35] and not all [09:35] hi... did anyone know a german ubuntu-support-channel? [09:35] ubuntu09 is configure in the dir ? === MOTZ [n=riefler@83-215-155-58.hage.dyn.salzburg-online.at] has joined #ubuntu [09:35] jamb ubuntu-de === Etppk [n=eddie@201.229.140.85] has joined #ubuntu [09:35] like a file? === nanonyme [n=siylioll@kirves.hut.fi] has joined #ubuntu === Zhent [n=Zhent@123.108.80.240] has joined #ubuntu === dgjones [n=Cheshire@unaffiliated/dgjones] has joined #ubuntu [09:35] ikonia: thx... [09:35] ok [09:35] ubuntu09, why don't you install libdvdread from the repositories? [09:35] how to install broadcom 4311 already installed fw update [09:35] age6racer: run lspci, see if you can figure out what wireless chip you got [09:35] it isnt in there [09:36] @MOTZ did you extract firmware files already with fwcutter? [09:36] ikonia: whe i try to run setup after root (hd0,5) i get an eror 15 [09:36] riaal: http://ktorrent.org/index.php?page=downloads has latest. you could compile from the tarball if you are determined for the latest one [09:36] yes [09:36] so it's prolly at 4 then... [09:36] but reinstalled ubuntu === RyanTM [n=rmulliga@74-141-214-255.dhcp.insightbb.com] has joined #ubuntu [09:36] danielronin when you run (hd0,4) does it seem happy ? [09:36] switched from 64 to 32 bit [09:36] yes, but how do exit grub gracefully? [09:36] wb ;) [09:36] genii, cheers [09:37] @MOTZ okay when you reinstall it deletes the firmware files from /lib/firmware [09:37] ubuntu09, it is in Universe: http://packages.ubuntu.com/feisty/libs/libdvdread3 === mailson [n=mailson@201008066135.user.veloxzone.com.br] has left #ubuntu ["Ex-Chat"] [09:37] ohh [09:37] maedhros: RalLink RT2500 802.11g Cardbus/mini-PCI (rev 01)) === kx [n=kx@122.169.157.210] has joined #ubuntu [09:37] so i must begin at step 1 ;) === x600 [n=x603@host-81-190-148-25.olsztyn.mm.pl] has joined #ubuntu === Lilia [n=ula@78.145.60.19] has joined #ubuntu === _Jan [n=_wipf133@91.64.197.148] has joined #ubuntu [09:37] setup succeeded at with root set at 4 === emet [n=emet@unaffiliated/emet] has joined #ubuntu === thansen|laptop [n=thansen@19.243.sfcn.org] has joined #ubuntu [09:37] could you send me the link once again ? [09:37] @MOTZ yeah cuz you did a fresh install === tovella [n=ktraglin@ool-4579ba05.dyn.optonline.net] has joined #ubuntu === f00fat [n=f00fat@p54A168DF.dip.t-dialin.net] has joined #ubuntu [09:37] yjwong - ok ill try thanks [09:37] ok [09:37] danielronin that looks good then [09:38] ikonia: how do i get back to normal shell prompt again? [09:38] thx dude [09:38] danielronin hd0,4 is right [09:38] from GRUB? [09:38] danielronin exit [09:38] danielronin quit [09:38] @MOTZ http://packages.ubuntu.com/cgi-bin/download.pl?arch=i386&file=pool%2Funiverse%2Fb%2Fbcm43xx-fwcutter%2Fbcm43xx-fwcutter_006-1_i386.deb&md5sum=7077056506c2f87bd7763310c150bc6e&arch=i386&type=main [09:38] 32 bit runs much faster [09:38] Error 27: unrecognized command [09:38] thx === melunko [n=mythtv@200.184.118.132] has joined #ubuntu [09:38] ...ahh quit workde....sorry about that [09:38] danielronin not a problem [09:38] anyone have a second to explain irssi installation, i dont understand the install instructions === maringo [n=maringo@p54896751.dip.t-dialin.net] has joined #ubuntu === danielronin crosses fingers === btruckle [n=btruckle@81-174-13-193.static.ngi.it] has joined #ubuntu === melunko [n=mythtv@200.184.118.132] has joined #ubuntu [09:39] spanks, irssi is in the repositories, I believe === Andrew67 [i=andrew67@206.248.101.182] has joined #ubuntu [09:39] maedhros: Hold on a second! it seems to work (I just connected to my network with it. The problem seems to be in network-manager-gnome or nm-applet. [09:39] ikonia you free yet? lol sorry to keep asking [09:39] yjwong - it says its libdvdread is already installed but "drip"program says it isnt compiled and that libdvdcss isnt installed but it is === lxuser [n=alan@68.113.106.94] has joined #ubuntu === tyoc [n=ubuntu@189.181.154.40] has joined #ubuntu [09:40] does anyone have experience with dynamips? i get this sometimes: Floating point exception (core dumped) [09:40] Ho I can burn a CD from LiveCD if I only have 1 device a DVDBurner? [09:40] From the the from the system tray icon I only have the choice of manually configured network. No list of AP's etc === r3700L3r [n=r3700L3r@70.229.98.130] has joined #ubuntu === zials [n=zials@74.12.179.177] has joined #ubuntu [09:40] is there a way i can manually edit the sessions without using the graphical sessions tool? [09:40] ubuntu09, are you trying to compile "drip" from source? [09:41] age6racer: RT wireless controllers are typically a problem :( Mine worked nice with one of the default wrappers, but no WPA possible... [09:41] i guess [09:41] "drip" can be found in the Ubuntu repositories as well [09:41] age6racer: You know the SSID of your network? [09:41] yes i installed drip [09:41] then it said you did not have libdvdcss? [09:41] uh [09:41] yes [09:41] oh [09:41] yeah, and I dont need WPA [09:41] libdvdcss may be illegal in some countries === Jeruvy [n=jeruvy@unaffiliated/jeruvy] has joined #ubuntu [09:41] is there a way i can manually edit the sessions without using the graphical sessions tool? === r3700L3r [n=r3700L3r@70.229.98.130] has joined #ubuntu [09:42] but I do need to be able to roam (so nm-applet is very useful to me) [09:42] that's why it is not included [09:42] the synaptic says it is installed tho === pi3 [n=sebas@13-196-17-190.fibertel.com.ar] has joined #ubuntu === thomax_ [n=thomas@217-148-244-130.happymany.net] has joined #ubuntu [09:42] age6racer: Okay, then I don't know, really. === MOTZ [n=riefler@83-215-155-58.hage.dyn.salzburg-online.at] has joined #ubuntu === MOTZ [n=riefler@83-215-155-58.hage.dyn.salzburg-online.at] has left #ubuntu [] === _Ulver_ [n=Genebild@20150170190.user.veloxzone.com.br] has joined #ubuntu [09:43] also the ./configure command has never worked for me. i dont know why === gallinola [i=gallinol@host159-179-dynamic.12-79-r.retail.telecomitalia.it] has joined #ubuntu === DrSlony [n=DrSlony@xdsl-5596.zgora.dialog.net.pl] has joined #ubuntu [09:43] ./configure will fail for a lot of things... [09:43] specially because there are no -dev files installed... === Jakyle [n=JJackson@c-98-200-40-174.hsd1.tx.comcast.net] has joined #ubuntu [09:43] Im trying to find a hypothetical file that contains what I launch each session. I dont wan to use the graphical tool to modify it, does anyone know if this file exists, and if so, where it is? === karmelek [n=mateusz@host-134-162-karolina.igloonet.pl] has joined #ubuntu === |gnurph| [n=gnurph@c-69-140-139-178.hsd1.md.comcast.net] has joined #ubuntu === motin [n=motin@c-2d8472d5.09-32-73746f42.cust.bredbandsbolaget.se] has joined #ubuntu === ^_Just|n_^ [n=justin@mctnnbsa24w-142167046132.pppoe-dynamic.nb.aliant.net] has joined #ubuntu === homanj [n=homanj@24-197-201-200.dhcp.roch.mn.charter.com] has joined #ubuntu [09:43] normally required for compile some things taht are based on some libraries === ^_Just|n_^ [n=justin@mctnnbsa24w-142167046132.pppoe-dynamic.nb.aliant.net] has left #ubuntu ["Ex-Chat"] === MOTZ [n=riefler@83-215-155-58.hage.dyn.salzburg-online.at] has joined #ubuntu === TataraKutere [n=alimurat@85.97.42.114] has joined #ubuntu === KennethP [n=kpo@x1-6-00-0f-b5-65-5a-c3.k324.webspeed.dk] has joined #ubuntu [09:43] ubuntu09, refer to the "Installing libdvdcss2" section in this link: https://help.ubuntu.com/community/RestrictedFormats/PlayingDVDs [09:44] Help, Im running Ubuntu Ultimate 1.4 from Virtualbox in WindowsXP. How do I set up my internet connection? When not running in an emulator I use eth0 [09:44] hey babies === snocone [n=Anon@216-67-50-115-cdsl-rb2.cwc.acsalaska.net] has joined #ubuntu === OFE [n=matt@cpc3-lich4-0-0-cust673.sol2.cable.ntl.com] has joined #ubuntu [09:44] back, so I let it set longer, and I had two errow messages, and by the end of all this, the main problem my computer could not load the graphic interface [09:44] I think that would help a lot :) [09:44] he said that i already installed fw === Lilia [n=ula@78.145.60.19] has joined #ubuntu [09:44] ikonia you there? [09:44] ok [09:44] ubuntu09: you can see the log of configure... [09:44] I dont remembner the name... [09:44] normally configure says why it has failed... [09:44] tyoc, it is config.log i guess :) [09:44] and you can see in the log... or cache IIRC [09:44] i need have rights to write and delete on a ext3 partition which i created by gparted livecd [09:44] UrbenLegend: bcm43xx-fwcutter is trying to access boredklink.googlepages..etc.. [09:45] is there a way to get firestarter to load on start? it seems because it requires root it wont work [09:45] i am having trouble with sound. It was working for a long time. Is it possible that the update i did yesterday caused the problem in sound? ie i am getting no sound. [09:45] at the end of the file normally you will find what has tried to execute configure... [09:45] who could give a had === genii goes to make a new pot of coffee === chickenF [n=chicken@Le71f.l.pppool.de] has joined #ubuntu [09:45] :D [09:45] genii, don't run..:) [09:45] this is new [09:45] :) [09:45] [196.534.298] Buffer I/O error on device fd01, logical block 0 === mariqn [n=mariqn@89.25.18.11] has joined #ubuntu [09:45] :-D [09:45] age6racer: Try to read up a little here, if you haven't already: http://www.flamingspork.com/blog/2005/01/14/rt2500-wireless-pci-card-on-ubuntu/ [09:45] IMHO, you rarely need to touch configure scripts on Ubuntu, given the size of the repos [09:45] ok, i'll make myself another coffee too [09:46] @snocone yeah during install it tries to get the firmware files but it should fail and skip on [09:46] @snocone that's what happened to me === kx [n=kx@122.169.157.210] has left #ubuntu ["Leaving"] [09:46] [234.560037] BUffer I/O error on device fd0, logical block 0 [09:46] is there a way to get firestarter to load on start? it seems because it requires root it wont work without me manually loading it after. === OFE [n=matt@cpc3-lich4-0-0-cust673.sol2.cable.ntl.com] has left #ubuntu ["Kopete] [09:46] those are my error messages [09:46] UrbenLegend: so what's the other file for again? it's what it was trying to get, right? [09:46] root@ubuntu-laptop:/home/ubuntu/Desktop# ./configure libdvdread-0.9.7.tar.gz [09:46] bash: ./configure: No such file or directory === asdf [n=asdf@74-133-197-227.dhcp.insightbb.com] has joined #ubuntu [09:46] @snocone yes === teak [n=teak@24.244.163.157] has joined #ubuntu [09:47] @snocone unzip that file and install it manually with bcm43xx-fwcutter [09:47] hey people, i need help...:( [09:47] sorry forget last post === danielronin [n=ubuntu@76.206.19.220] has joined #ubuntu [09:47] lxuser: this article has some tips for firewall & root password - http://www.ubuntugeek.com/firestarter-firewall-for-your-ubuntu-desktop.html [09:47] Jakyle, it is a confirmed bug. Refer: https://bugs.launchpad.net/ubuntu/+source/casper/+bug/97306 [09:47] ubuntu09 is configure in the same dir as you ? [09:47] UrbenLegend: how do I install it manually with bcm43xx-fwcutter? [09:47] Hi all.I have a problem with Desktop Effects.(The effect for the cube).I have 4 workplaces,but when i gone to left (2nd workspace) the cube effect doesn't work :( Where can be the problem.? I'm using Ubuntu 7.04. [09:47] thanks blazeix. that will help [09:47] thank you :) [09:47] ikonia i dont understad === cobman [n=justinas@212.47.107.22] has joined #ubuntu === Er_39 [n=jars@dslb-088-077-021-180.pools.arcor-ip.net] has joined #ubuntu [09:48] ubuntu09 is the file command "file" configure in your current working directyl [09:48] @snocone 'sudo bcm43xx-fwcutter -w /lib/firmware ~/Desktop/bcmwl5.sys'' [09:48] ikonia: no dice :( [09:48] he said erroe 404 when installing fw cutter [09:48] lxuser: here is a tutorial from the ubuntu forums, its a little more recent [09:48] lxuser: http://ubuntuforums.org/showthread.php?p=1102721&posted=1 [09:48] ah right, I even copied that down [09:48] @snocone replace /desktop/ with the current path where you unzipped it [09:48] no [09:48] danielronin one moment [09:48] age6racer: And here also: https://help.ubuntu.com/community/WifiDocs/Driver/RalinkRT2500 [09:48] well this was a useless restart :o === PrivateUnix17185 [n=flowman4@41.219.237.183] has joined #ubuntu === MikeGTN [n=mike@mikegtn.plus.com] has joined #ubuntu [09:49] ubuntu09: decompress libdvdread-0.9.7.tar.gz with tar xzf libdvdread-0.9.7.tar.gz and after that cd libdvdread-0.9.7 and ther you type ./configure && make && sudo make install === PrivateUnix17185 is now known as D_ReaL_PuNiShEr === spheard [n=andrew@88-97-31-55.dsl.zen.co.uk] has left #ubuntu [] === pbn [i=pbn@wopr.geekshells.org] has joined #ubuntu === amias [n=amias@85-211-254-18.dsl.pipex.com] has joined #ubuntu === nbkr [n=nbkr@p54AA2445.dip0.t-ipconnect.de] has joined #ubuntu [09:50] ubuntu09, have you read this: https://help.ubuntu.com/community/RestrictedFormats/PlayingDVDs [09:50] Hello, with the Kubuntu 6.06 LTS default install, is there a firewall ? Or do I need a firewall ? Or perhaps do I not need a firewall because by default no daemons are listening to the Internet ? === rjs2 [n=rjs2@c-69-243-138-228.hsd1.in.comcast.net] has joined #ubuntu [09:50] !firewall | pbn [09:50] pbn: Ubuntu, like any other linux distribution, has firewall capabilities built-in. The firewall is managed using the 'iptables' command (see https://help.ubuntu.com/community/IptablesHowTo), or GUI applications such as Firestarter (Gnome) or Guarddog (KDE). [09:50] okay, so I have to make sure my floppy drive is disabled if it does not work, and it should pick it up fine right? === krisk [n=krisk@216-92-115.0511.adsl.tele2.no] has joined #ubuntu === teak [n=teak@24.244.163.157] has joined #ubuntu === krisk [n=krisk@216-92-115.0511.adsl.tele2.no] has left #ubuntu ["Ex-Chat"] === teak [n=teak@24.244.163.157] has joined #ubuntu [09:50] "If you are using Ubuntu 7.04 or later: Install the libdvdcss2 package after adding the unsupported third-party repository Medibuntu." [09:50] pbn: firestarter is really good [09:51] why haave i error 404 when try installig fw cutter === ubuntu [n=ubuntu@87.228.60.118] has joined #ubuntu === dgjones [n=Cheshire@unaffiliated/dgjones] has joined #ubuntu [09:51] thanks foofat [09:51] pbn: since you use kubuntu though you might want to use GuardDog instead === neol [n=infe@122.167.92.5] has joined #ubuntu [09:51] if I have a different error, ill brb then [09:51] thank you yjwong === pips1 [n=philipp@105.142.77.83.cust.bluewin.ch] has left #ubuntu ["Ex-Chat"] [09:52] Blazeix: yeah but, I'm a geek, so I can directly write iptables rules :) ... In fact I already have the iptables rules written :) [09:52] ompaul, if you're still around, restricted drivers didn't help, but installing nvidia-glx instead of nvidia-glx-legacy has worked, thanks for the suggestion [09:52] @MOTZ cuz its trying to get the firmware files from online [09:52] pbn: cool [09:52] @MOTZ it will fail and then proceed with install [09:52] ikonia: is there a way to manually point menu.ls to the right /dev ? [09:52] Blazeix: the question was actually .. well... I kinda "head" that by default, Ubuntu has no ports open to the Internet, so you don't need a firewall .... [09:52] "heard" * [09:52] @MOTZ then later just use fwcutter on your driver files [09:52] dgjones, well that tool should have done it for you out of the box, next install trust it first :) [09:53] Right. Ubuntu has a policy that it ships with no open ports [09:53] ok where the next steps ? === sqnl [n=sicknell@201-10-104-215.mganm702.dsl.brasiltelecom.net.br] has joined #ubuntu === crocd [n=crocd@lanwan.plus.com] has joined #ubuntu === facugaich [n=facugaic@unaffiliated/facugaich] has joined #ubuntu === L-TOM [i=eLiTo@201-41-196-69.cscgo701.dsl.brasiltelecom.net.br] has joined #ubuntu === Kill_X [i=kill_x@p5B165609.dip.t-dialin.net] has joined #ubuntu [09:54] MOTZ: if you are seeing that instead of a webpage 404 means the server could not find the requested information , do an apt-get update and apt-get upgrade to see if there is a new version with a corrected url [09:54] Blazeix: so ... no iptables needed ? :) [09:54] ikonia me next :P lol [09:54] @MOTZ i just told you, use bcm43xx-fwcutter to cut the driver files that came with your disk. [09:54] ompaul, to be honest, i didn't think to try it, i just used synaptic to install legacy thinking it was the correct driver, ah well, you live and learn :) === Gaaston [n=hledoux@18.175-65-87.adsl-dyn.isp.belgacom.be] has joined #ubuntu [09:54] pbn: iptables is part of the kernel , you already have it === yjwong is now known as yjwong|sleep [09:54] ok [09:54] @amias the install was just trying to connect to a firmware file online, except MOTZ doesn't have his internet working yet :) [09:55] anyone have any advice on recovering any files that have disappeared from a partition? [09:55] pbn: I'm not familiar with the inner workings, so I can't really say one way or the other. I wouldn't bother removing it though, since its som small [09:55] UrbenLegend, a server answered it with a 404 , so unless he has some crazy proxy he's online === wib [n=jojo@dyndsl-091-096-040-083.ewe-ip-backbone.de] has joined #ubuntu === GodSyn [n=syn@c-68-59-211-72.hsd1.tn.comcast.net] has joined #ubuntu === GodSyn [n=syn@c-68-59-211-72.hsd1.tn.comcast.net] has left #ubuntu ["Ex-Chat"] === tck [n=tck@213-202-170-177.bas504.dsl.esat.net] has joined #ubuntu === pat__ [n=pat@77.193.9.199] has joined #ubuntu [09:56] why is it that copy and paste of text doesn't work when you close the window you were copying from? [09:56] alguem aqui fala portugues? === Terminus [n=jjereza@210.213.138.114] has joined #ubuntu [09:56] i get a "Starting HTTP Cache Cleaner..:" in the bottom panel from time to time running KDE applications like AmaroK in Gnome. How can i fix it?.. [09:56] alguem aqui fala portugues? [09:56] ? [09:56] ai [09:56] L-TOM [09:56] finally ATI has come with better graphics drivers for linux users... for more info visit http://www.amd.com/us-en/Corporate/VirtualPressRoom/0,,51_104_543~119281,00.html great news for ATI cards user. [09:56] hauhauhau [09:56] !ubotu portuges [09:56] Sorry, I don't know anything about portuges - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [09:56] wib: it does but it the clipboard also expires [09:57] diga [09:57] @amias, true, i just assumed he wasn't online cuz he was trying to get bcm43xx working [09:57] amias: yes, I know :) === jamb [n=jamb@V5ea6.v.pppool.de] has left #ubuntu ["Ex-Chat"] === Keule|On [n=keule@p57BBE153.dip.t-dialin.net] has left #ubuntu [] === Kill_X [i=kill_x@p5B165609.dip.t-dialin.net] has joined #ubuntu [09:57] L-TOM [09:57] !pt [09:57] Por favor use #ubuntu-br ou #ubuntu-pt para ajuda em portugus. Obrigado. [09:57] oi [09:57] tenho que sair agora [09:57] sqnl? [09:57] o [09:57] amias: lemme rephrase the question, do I need to filter ports with iptables on a default install of ubuntu 6.06 LTS ? === BlackF1re_ [n=jmarsman@ip3e83670c.speed.planet.nl] has joined #ubuntu === ni1s [n=ni1s@1-1-4-36a.dre.sth.bostream.se] has joined #ubuntu === UB` [n=mik@85-18-201-169.ip.fastwebnet.it] has joined #ubuntu === BlackF1re_ [n=jmarsman@ip3e83670c.speed.planet.nl] has left #ubuntu ["Ex-Chat"] [09:57] smoke weed with friends === Kill_X [i=kill_x@p5B165609.dip.t-dialin.net] has joined #ubuntu === OSUKid7 [n=OSUKid7@acm.bw.edu] has joined #ubuntu [09:58] sqnl: #ubuntu-pt [09:58] amias: it expires? when and why? [09:58] ae sick... vlw pelas dicas mano === ni1s [n=ni1s@1-1-4-36a.dre.sth.bostream.se] has joined #ubuntu [09:58] Blazeix [09:58] olha. valeu brother! === cjae_ [n=cjae@69-11-37-233.estv.hsdb.sasknet.sk.ca] has joined #ubuntu [09:58] sqnl: yes? [09:58] flagro L-TOM [09:58] uhum [09:58] Blazeix, yes! thanks man [09:58] pbn: If you are concerned about security of open ports..no.. You can verify this at grc.com using shields-up scanner [09:58] sqnl: no problem === cacaupt [n=cacaupt@bl10-36-100.dsl.telepac.pt] has joined #ubuntu === adminet [n=adminet@190.48.232.5] has joined #ubuntu [09:58] pbn: probably not unless you've seen people attack you , but it is a good idea to learn iptables (gets you $$$) and home is a great place to find out what happens with different options [09:58] sqnl, I only smoke with enemies :P [09:59] 12 peoples, haha.ok ok [09:59] i need learning how speak english [09:59] my english is bad [09:59] amias: yeah anyway when I've the machine setup, I'll for sure do nmap on it from another box to check what is open with the ubuntu 6.06 default install :) [09:59] sqnl: sudo apt-get install english [09:59] amias [09:59] whichcountry do you live in? === utka [n=utka@5ac83695.bb.sky.com] has joined #ubuntu [09:59] hauhuahuahuhauua === dgjones [n=Cheshire@unaffiliated/dgjones] has joined #ubuntu [09:59] god === johnub [n=johnub@athedsl-246717.home.otenet.gr] has joined #ubuntu [10:00] which country do you live in, sqnl? [10:00] brasil [10:00] sqnl... vou ter que ir mano... a gente se fala [10:00] vlw! [10:00] blz, valeu L-TOM [10:00] flw mano... vlw! se marcah apareo ae hj [10:00] Ax-Ax and you? [10:00] Ax-Ax: (s)he's a troll === L-TOM [i=eLiTo@201-41-196-69.cscgo701.dsl.brasiltelecom.net.br] has left #ubuntu [] === _WS_2 [n=Dubya@66-215-120-192.dhcp.gvrb.ca.charter.com] has joined #ubuntu === dmb [n=dmb@unaffiliated/dmb] has joined #ubuntu [10:01] i live in Swden === passbe [n=passbe@ppp184-119.static.internode.on.net] has joined #ubuntu [10:01] That explains my English-skillz === diablos_raven [n=diablo@c-71-197-65-97.hsd1.ca.comcast.net] has joined #ubuntu [10:01] Ax-Ax: he connected from .br [10:01] ok [10:01] !offtopic [10:01] #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome! [10:01] anythign not related to ubuntu support of is not english related to ubuntu support should be take to #ubuntu-offtopic and your languages channel repectively. [10:01] how do I do copy on the fly with k3b now with the new version [10:01] meh 2 secnds to late ;P === riaal [n=riaal@87.96.195.71] has joined #ubuntu [10:02] amias: n=amias@85-211-254-18.dsl.pipex.com === Gaz_ [n=grogers@dhcp80ff8c34.dynamic.uiowa.edu] has joined #ubuntu === Kill_X [i=kill_x@p5B165609.dip.t-dialin.net] has joined #ubuntu === dho_ragus [n=dho_ragu@12.24.42.67] has joined #ubuntu [10:02] there used to be a radio button so it didn't used same optical to read as to burn === fenixx [n=jotitia@86.68.34.245] has joined #ubuntu === mago [n=mago@194.183.81.82] has joined #ubuntu === Mrowkojad [i=rompir@shell.klupek.org] has joined #ubuntu [10:02] so, again, copy and paste doesn't work properly? or is expireing a feature? === romek [n=romek@89.174.61.146] has joined #ubuntu === micr [n=micr@80.178.57.172.adsl.012.net.il] has joined #ubuntu === Jakyle [n=JJackson@c-98-200-40-174.hsd1.tx.comcast.net] has joined #ubuntu [10:03] wib, do you have gpm installed ? === Lattyware [n=Latty@host86-134-66-52.range86-134.btcentralplus.com] has joined #ubuntu === Marfi [n=ronzo@cpe-069-132-181-161.carolina.res.rr.com] has joined #ubuntu === tristan_ [n=trisan@mail.touchtunes.com] has left #ubuntu ["Leaving"] === blinker [n=DT@198.111.163.53] has joined #ubuntu [10:03] has anyone run into a problem with firefox being buggy lately? [10:03] amias: checking... === sorata [n=sorata@p5B23F45C.dip.t-dialin.net] has joined #ubuntu === rrittenhouse [n=tad@unaffiliated/rrittenhouse] has joined #ubuntu === lxuser_ [n=alan@68.113.106.94] has joined #ubuntu === bullgard4 [n=detlef@p54BF0775.dip0.t-ipconnect.de] has joined #ubuntu [10:03] amias: no. what is it, anyway? [10:03] Marfi: SOmeone said people running flash needed to increase their cache === sorata [n=sorata@p5B23F45C.dip.t-dialin.net] has joined #ubuntu [10:04] I810: No matching device section for instance [busID PCI: 0 : 2 : 0] found === Gaz_ [n=grogers@dhcp80ff8c34.dynamic.uiowa.edu] has joined #ubuntu [10:04] No Device detected [10:04] Jack_Sparrow, how do i go about doing that? [10:04] this is for my graphics === sprite [n=sprite@ip68-111-85-211.oc.oc.cox.net] has joined #ubuntu === sprite_ [n=sprite@ip68-111-85-211.oc.oc.cox.net] has joined #ubuntu [10:04] I cannot see the graphics interface,a nd it warns me [10:04] wib: linux clipboard program , does the 'select to copy , click to paste' stuff === marco_ [n=marco@host241-1-dynamic.60-82-r.retail.telecomitalia.it] has joined #ubuntu [10:04] what's the name of the package that detects needed gstreamer codecs? [10:04] ikonia: what was the command to see all the mount points? [10:05] hey folks, I need help manually recovering some data off one of my drives >_< [10:05] amias: but it works /sometimes/, so, isn't there a bug? [10:05] danielronin, 'df' [10:05] amias: and you? === Latty [n=Latty@host86-141-178-161.range86-141.btcentralplus.com] has joined #ubuntu === Sumsaren [n=Sumsar@0x57327a48.hsnxx2.adsl-dhcp.tele.dk] has joined #ubuntu [10:05] danielronin: mount [10:05] does gnome control copy and paste? [10:05] from... ? [10:05] can anyone help me with my problem maybe...? [10:05] Jakyle: It cannot find your video card in the physical location it expects to find it [10:05] @blinker is the parition still intact? [10:06] ni1s, you could do apt-cache search gstreamer to see what packages there are with gstreamer in the name , you might get lucky [10:06] so, I have to move my video card.../??? is there no way to bybass this? [10:06] ikonia: i'm sory i meant that i needed to see the partition table [10:06] yeah, I can still access most of whats on it, but there are bad sectors eating directories and files [10:06] Jakyle, which video card do you have? [10:06] Jack_Sparrow, how do i update the cache for firefox? [10:06] Where can i fine video drivers (ATI Radeon 9550) for Ubuntu? [10:06] wib, use Ctrl+C/V/X instead [10:06] it forces fsck on boot and fails, telling me to run manually [10:06] ATI Radeon PCI (not express mind you) 9250 [10:06] Jakyle: I would suggest instead to run sudo dpkg-reconfigure xserver-xorg === marti149 [n=marti149@vcsom-114-42.csom.umn.edu] has joined #ubuntu [10:06] amias, and you? United Kingdom ?? [10:06] Marfi: Sorry I had to take a call... I do work occasionally [10:06] i'm on live cd, so mount only shows the current fs's [10:06] can i somehow delete my windows partition, and join it with my linux partition without losing data on the linux partition? I want to get rid of windows. === darlek2000 [n=upon@CPE000f3d513fb5-CM0011ae927866.cpe.net.cable.rogers.com] has joined #ubuntu [10:06] Jakyle, so why are you using the i810 driver? [10:06] is there a way to list fullpaths using ls -la ? or something like it? [10:06] sqnl: yup . bath [10:06] amias: that's what i'm doing. you think installing this gmp would help? [10:07] francais [10:07] Jack_Sparrow, its fine. =) [10:07] amias: Crowell ?? [10:07] @blinker bad sectors? you should run something like spin rite, i am not sure if fsck will do the job although someone may correct me [10:07] Marfi: I dont do flash I was just relaying what I had heard in channel [10:07] :) [10:07] Jack_Sparrow, aight, ty. [10:07] wib, as long as you install gpm not gmp [10:07] my firefox has been a bit buggy. does anyone know about how to up the cache for it? [10:07] so I have my pci card in the wrong pci slot? [10:07] UrbenLegend: well, "error reading block" to be more accurate [10:07] Jakyle, do you have more than one video card in that machine? === qebab [n=robb@136.80-202-209.nextgentel.com] has joined #ubuntu [10:08] !paste [10:08] pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic) [10:08] onboard [10:08] other then that, just the card [10:08] amias: whats gmp now... [10:08] hi guys i need some help with grub someone willing to help? i already know the basics but i think i am not adding the correct info to boot into my other distro ... cheers [10:08] but I disabled the onboard a while back [10:08] mang === fenixx [n=jotitia@86.68.34.245] has joined #ubuntu [10:08] @marfi preferences->advanced->network [10:08] Sumsaren: try gparted => http://gparted.sourceforge.net [10:08] Jakyle, and is that onboard card an intel chip? [10:08] Marfi, type about:config in the location bar or have a look at Edit->Preferences [10:08] yes it is === marti149 [n=marti149@vcsom-114-42.csom.umn.edu] has left #ubuntu [] [10:08] wib, dunno , you mentioned it [10:08] im using a dell deminsion E310 === marti149 [n=marti149@vcsom-114-42.csom.umn.edu] has joined #ubuntu [10:08] amias: alright thanks === yoko [n=yoko@adsl-76-216-37-138.dsl.lsan03.sbcglobal.net] has joined #ubuntu === griznok [n=tootoo31@bzq-84-109-100-8.red.bezeqint.net] has joined #ubuntu [10:09] Could anyone take a look at this: http://paste.ubuntu-nl.org/36482/ and try to explain what went wrong? [10:09] @blinker: sorry i don't have much experience recovering drives, usually i just run spin rite if there's bad sectors or something [10:09] Totem does the same thing === shr|ke [n=shrike@85.95.211.228] has joined #ubuntu [10:09] Adnan_, please pastebin your /boot/grub/menu.lst and "sudo fdisk -l" [10:09] Jakyle, ok. here's why you get the error. You use an ATI card but you have selected the intel i810 driver. the intel driver can not find an intel video card on that bus. My guess is, if you change the driver from i810 to whichever your video card is supposed to have, the error will dissappear. === dho_ragus [n=dho_ragu@12.24.42.67] has left #ubuntu ["Leaving"] [10:09] f00fat: thanx.. [10:09] how does one empty trash as root? === Pe3k [n=chatzill@nat-88-212-20-19.antik.sk] has joined #ubuntu === WaxyFres1 [n=r00t@199-2-59-123.dsl.dynamic.uninets.net] has joined #ubuntu [10:10] Jeruvy, root doesn't have trash unless you've been naughty running nautilus as root [10:10] Jakyle, I don't know ATI cards so I can not recommend a driver for you. [10:10] I don't get this, how can I have my boot messages logged into a /var/log/??? file? === orchid` [n=orchid@oh-71-51-119-234.dhcp.embarqhsd.net] has joined #ubuntu [10:10] lol sweet === salah__ [n=salah@217-12-140.0505.adsl.tele2.no] has joined #ubuntu [10:10] @blinker here's some fsck commands http://www.computerhope.com/unix/fsck.htm you might have to run it while your partition is unmounted [10:10] the thing with Ati... [10:10] PriceChild: no but I have filed that I deleted and I cannot empty the trash now [10:10] can someone help me install a flash player fpor my ubuntu feisty fawn? [10:10] is there a way to list fullpaths using ls -la ? or something like it? [10:10] @blinker if its the root drive then use the live cd and run it from there [10:10] Jakyle, try this (and hope it autodetects) "sudo dpkg-reconfigure xserver-xorg" and see which one the setup program recommends. [10:10] hi i lost my user name/pass once i boot into safe mode how do i see a list of what user names have been used? === ajoergen [n=ajoergen@0405ds1-arsy.0.fullrate.dk] has joined #ubuntu === pbn [i=pbn@wopr.geekshells.org] has left #ubuntu [] [10:11] im running in windows [10:11] bentob0x: Aren't they already going to /var/log/boot ? [10:11] im trying to install ubuntu [10:11] hello, please where could I find software list of kubuntu 7.04 dvd ? [10:11] but thats the error im getting [10:11] UrbenLegend its not. thanks, I'll give that a try. [10:11] amias, found it, ty. [10:11] !flash | orchid` [10:11] orchid`: To install Flash see https://help.ubuntu.com/community/RestrictedFormats/Flash - Flash 9 is now available in dapper-backports and edgy-backports - See also !Restricted and !Gnash [10:11] it's written (Nothing has been logged yet.) in that file genii [10:11] Jakyle, oh. that is the error you get on the live cd? [10:11] qebab, looks like your graphics cards Xvideo functions are being used by something else , try closing your webrowser [10:11] yes sir === bullgard4 [n=detlef@p54BF0775.dip0.t-ipconnect.de] has joined #ubuntu [10:11] Jeruvy, oh... so delete the ~/.Trash file [10:11] *folder === wib [n=jojo@dyndsl-091-096-040-083.ewe-ip-backbone.de] has left #ubuntu [] [10:11] thanks amias, I'll try that === verb3k_ [n=verb@87.109.225.220] has joined #ubuntu [10:12] well, I burned the image on a cd, using the software in the site [10:12] WaxyFres1, cat /etc/passwd and then passwd your user [10:12] PriceChild: the whole folder? [10:12] Jakyle, ouch... wait, i will do a search === notype [n=notype@200.51.218.87.dynamic.jazztel.es] has joined #ubuntu === shr|ke [n=shrike@85.95.211.228] has joined #ubuntu [10:12] *gulp* === Pat__ [n=patrick@c-65-34-167-172.hsd1.fl.comcast.net] has joined #ubuntu === dug_ [n=doug@c-76-27-109-105.hsd1.ut.comcast.net] has joined #ubuntu [10:12] Jeruvy, well that's your trash? [10:12] WaxyFres1: have a look at /etc/passwd [10:12] amias: same thing. I guess a reboot might well do it, but I'll try that another day I think [10:12] bentob0x: The other informative logs there regarding hardware detection during boot and other messages would be dmesg and messages === notype [n=notype@200.51.218.87.dynamic.jazztel.es] has left #ubuntu ["Ex-Chat"] [10:13] hello why would my sound just stop workin? [10:13] ubuntu has spoiled me, I don't turn off my computer anymore === xbisont [n=nobody@148.229.1.11] has joined #ubuntu [10:13] qebab, try it first thing after logging in === donkeegan [n=den@220.226.16.176] has joined #ubuntu [10:13] f00fat: im talking a friend thru it over the phone hes a n00b i dont want to confuse him too bad is there another way? [10:13] KevinOman, doesn't just stop working... what have you done? [10:13] guys I want to transfer files between my phone and ubuntu through bluetooth ...is there any way to do that ? thanks in advance === ed__ [n=ed@74.195.141.238] has joined #ubuntu [10:13] @qebab a few animals just died cuz you said that [10:13] will do, amias === Skrypt [n=skrypt@64.62.187.4] has joined #ubuntu === Pingviller [n=chatzill@89.233.242.14] has joined #ubuntu [10:13] I watched a video [10:13] now I want to listen to music === wt8008 [n=doubleyo@adsl-75-41-56-227.dsl.pltn13.sbcglobal.net] has joined #ubuntu [10:13] it stopped working === kalis_bliumkvist [n=patrimpa@ctv-213-164-102-136.vinita.lt] has joined #ubuntu [10:14] I have SCIM running. It switches input methods whenever I press left-shift and left-control at the same time. I checked the SCIM config and it does not *seem* to be configured to do anything with that sequence. What might be going on? === rathel [n=rathel@c-24-9-186-226.hsd1.wa.comcast.net] has joined #ubuntu === Paddy_EIRE [n=patrick@84.13.126.88] has joined #ubuntu [10:14] Jakyle, maybe this can help. see if there are any BIOS settings to set to make the default video card PCI instead of AGP; http://forums.kororaa.org/viewtopic.php?p=8452&sid=3377568074a2104d84f9b1a5edb39196 [10:14] qebab, i think you might also get some benefit from simplifing the options in your xorg.conf as they can often consume said resources === benzss [n=huhu@80-42-183-50.dynamic.dsl.as9105.com] has joined #ubuntu [10:14] i keep getting the fuke canot be installed due to lack of proper isntaller [10:14] my pc does not have any agp slots === gnuskool_ [n=chatzill@82.99.36.199] has joined #ubuntu [10:14] i have the files downloaded for my media/flash player === |thunder [n=e@c-71-238-224-37.hsd1.mi.comcast.net] has joined #ubuntu [10:14] but they also All HAVE LOCKS ON THEM [10:14] HELP? [10:14] (I had no clue it didnt have any agp when I bought it *sniff*) [10:14] Jakyle, the onboard intel card is set to AGP [10:14] Can someone help me with rtorrents config file? === gilles [n=gilles@APoitiers-155-1-150-22.w81-50.abo.wanadoo.fr] has joined #ubuntu [10:14] KevinOman, so close the tool you used to watch the video and then start the music player [10:14] WasyFres1: no, there is no other way [10:14] oh well that makes me happy, ill read the thread, thank you [10:14] Is partimage on ubuntu dvd? [10:15] Jakyle, it's an onboard AGP bus :) [10:15] pricechild, I didn't do anything except for watcha video from the net, now about 4 hours later I don't have any sound [10:15] thats too much lol [10:15] the browser has been closed [10:15] I'm looking for the list of the boot messages like *starting apache server ------[OK] for instance genii [10:15] !flash | orchid` === jp [n=jp@89.241.84.107] has joined #ubuntu [10:15] orchid`: To install Flash see https://help.ubuntu.com/community/RestrictedFormats/Flash - Flash 9 is now available in dapper-backports and edgy-backports - See also !Restricted and !Gnash [10:15] KevinOman, see /msg ubotu sound [10:15] verb3k_: download a package called blue tooth file sharing. [10:15] ... [10:15] !flash > orchid` (the bot has sent you a message, please read it and work on those instructions) [10:15] so i see we are speaking the same langaUGE. [10:15] THE SITE ISNT HELP[ING MUCH AT ALL. [10:15] bentob0x, try 'dmesg' [10:16] ...or other sw for creating backup of partition? [10:16] hi how can i download a package from the repository without installing it . [10:16] orchid`, so go somewhere else then === publico [n=publico@200.25.240.37] has joined #ubuntu [10:16] I'm having an issue with USB devices going offline by themselves in Feisty on an Asus P5B. If anyone has any ideas that would be awesome. Info: http://ubuntuforums.org/showthread.php?t=543810 === meldog [n=matt@noc.myinternetwebhost.com] has joined #ubuntu [10:16] bentob0x: The webserver logs will be in the apache or apache2 log [10:16] orchid`, (A) don't SHOUT, (B) it worked for lots of people so please re read it and work with it [10:16] !package [10:16] Sorry, I don't know anything about package - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi === weas3l [n=weas3l@S010600131009607e.ed.shawcable.net] has joined #ubuntu [10:16] donkeegan: bluetotoh-file-sharing ...can it be this ?> === aes [n=aes@c-76-110-208-39.hsd1.fl.comcast.net] has joined #ubuntu [10:16] PriceChild: I've got no message fom ubotu [10:16] ?* [10:16] 0shi. sorry for caps [10:16] KevinOman, /msg ubotu sound === sebsebseb [n=chatzill@82-46-9-58.cable.ubr05.azte.blueyonder.co.uk] has joined #ubuntu [10:16] oh ok [10:16] donkeegan: 'sudo apt-get install -d package' [10:16] @donkeegan: there should be an option in synaptic [10:16] my light wasnt working and i was not looking at the screen, my apologies. [10:17] Jakyle, just because, I just remembered that i have a via motherboard with an onboard CL266 graphics card that is displaying through AGP even though I do not have a physical AGP slot in the machine.... === prabs [n=prabs@82-47-37-135.cable.ubr03.wolv.blueyonder.co.uk] has joined #ubuntu === twosouls82 [n=twosouls@cc100614-b.assen1.dr.home.nl] has joined #ubuntu [10:17] thankd erUSul === homanj [n=homanj@24-197-201-200.dhcp.roch.mn.charter.com] has left #ubuntu [] [10:17] lol [10:17] well thank you for your memory, you saved the day ;) === lousygarua [n=lousygar@bzq-88-153-90-194.red.bezeqint.net] has joined #ubuntu === ptn107 [n=phil@m115f36d0.tmodns.net] has joined #ubuntu [10:17] im going to see what I can configure, thanks for the help [10:17] Jowi, lots of boards have built in AGP cards but no slots === Lilia [n=ula@78.145.60.19] has joined #ubuntu [10:18] ok, maybe I'm not very clear, sorry. You know those messages you see when you boot with 'nosplash' on? that's the messages I'd like to see in a log file === preaction [n=doug@71-86-227-90.static.mdsn.wi.charter.com] has joined #ubuntu [10:18] Jowi: even thought the card is not in an agp slot, it still communicates with the rest of the mobo the same way agp cards do === perl_cont [n=postmast@host81-159-49-143.range81-159.btcentralplus.com] has joined #ubuntu [10:18] amias, I believe you. unfortunatley, I only saw one in my life. === SoulChild [n=eshat@dslb-084-060-008-112.pools.arcor-ip.net] has joined #ubuntu === POVaddct [n=chris@p54B377CB.dip.t-dialin.net] has joined #ubuntu [10:18] Jowi, they only come out when the moon is fool [10:18] where are packages downloadet if i download via apt-get ??? === mcquaid [n=mcquaid@toronto-hs-216-138-233-79.s-ip.magma.ca] has joined #ubuntu [10:18] Vlet, yeah, i understand the principle. but the first time you see it in the BIOS it is confusing. [10:18] bentob0x: you can see it with dmesg | less [10:18] bentob0x: dmesg should show you what you want to see === neol [n=infe@122.167.92.5] has left #ubuntu [] === mr_daniel [n=sysrq@e177145004.adsl.alicedsl.de] has joined #ubuntu === a[2121] e [n=a2121e@18.97.95.219.trm01-home.tm.net.my] has joined #ubuntu [10:19] SoulChild: /var/cache/apt/archives/ === speroni [n=chatzill@cpe-24-24-83-99.stny.res.rr.com] has joined #ubuntu [10:20] verb3k_: i think the package is gnome-bluetooth === erythro is now known as Erythro === Robbster [n=james@dsl-241-11-182.telkomadsl.co.za] has joined #ubuntu [10:21] pricechild ok i will === zAo_ [n=johan@ip565eef79.direct-adsl.nl] has joined #ubuntu [10:21] pricechild i will have to move to my notebook though lol bare with me please === urthmover [n=me@adsl-68-94-224-35.dsl.rcsntx.swbell.net] has joined #ubuntu [10:22] donkeegan: I installed that one ...but I only received an icon in the system tray called bluetooth manager ....is there a utility that enables you to send and receive files ? thanks for your time === Pici [n=Pici@ool-4355be00.dyn.optonline.net] has joined #ubuntu [10:22] oh yes === zAo_ is now known as zAo^ === DerHorst [n=Horst@e176127049.adsl.alicedsl.de] has joined #ubuntu [10:23] I'm trying to backport postgres7.4 to Feisty from debian sources using pbuilder. any pbuilder users out there that can help me get it umm, working? [10:23] hey all === cacaupt [n=cacaupt@bl10-36-100.dsl.telepac.pt] has left #ubuntu ["Leaving"] [10:23] well switch the blue tooth in you phone on . and search for the device youll find it. === zAo^ [n=ask@ip565eef79.direct-adsl.nl] has joined #ubuntu === mark231 [n=lolmac@201-14-187-33.fnsce701.dsl.brasiltelecom.net.br] has joined #ubuntu [10:23] donkeegan: search through what ? :) [10:24] the phone.. === root____ [n=chatzill@bdv75-2-81-57-250-95.fbx.proxad.net] has joined #ubuntu === wonderboyjones [n=wonderbo@24-178-215-131.dhcp.tyvl.il.charter.com] has joined #ubuntu [10:24] donkeegan: I discover it but it says sending failed === polly [n=polly@CPE-65-30-192-8.wi.res.rr.com] has joined #ubuntu [10:24] i'm having some trouble with my wifi, i recently installed ubuntu, got ndawrapper and got the correct drivers, but i cannot connect to my wifi still, i've scoured the ubuntu help files but nothing seems to work.. [10:24] i've downloaded the ati drivers for linux X86 [10:24] hmm === zAo^ [n=ask@ip565eef79.direct-adsl.nl] has joined #ubuntu [10:24] but i can't "run" in [10:24] Hello there. Can startx my X session under Ubuntu 6.10 only as root. I've been digging the web, but I'm stale... [10:24] how do i install it in feisty fawn version? === VonBerserk [n=vonberse@8.86-225-89.dsl.completel.net] has joined #ubuntu === Jakyle [n=JJackson@c-98-200-40-174.hsd1.tx.comcast.net] has joined #ubuntu [10:25] donkeegan: I have a nokia phone [10:25] if i wanted to try installing the "ulitimate gamers edition" over my existing, it'll erase everything correct? [10:25] me too but i didnt face a problem [10:25] any ideas? [10:25] mark231: chmod +x your ati_downloaded_file.run [10:25] how on let me try === Rosiel [n=rosiel@dslb-084-063-166-249.pools.arcor-ip.net] has joined #ubuntu [10:25] @speroni are you using roaming? === velo|gfx [n=velogfx@chello062178198017.5.15.vie.surfer.at] has joined #ubuntu [10:25] hiho [10:25] root____: what happens when run with the normal user? [10:25] I'm trying to forward port postgres 7.4 to feisty with pbuilder. I've got the pbuilder environment installed, but can't seem to build the package... any help? === Xyhthyx [n=Xyhthyx@adsl-64-237-203-108.prtc.net] has joined #ubuntu === Neoxyge [n=neoxy@84-74-175-159.dclient.hispeed.ch] has joined #ubuntu [10:25] donkeegan: ok [10:25] someone know how to get WIFI indicator back into the upper panel? [10:26] no i turned that off because its wep incrypted and everything [10:26] Jowi, do my dismay, the only options I have on my BIOS is to switch from automatic (detects cards and use them, but keeps onboard on) or to just use my onboard [10:26] ive deleted it accidentaly [10:26] velo|gfx: restart networkmanager [10:26] @speroni network manager supports wep and wpa though [10:26] velo|gfx: Alt-F2, and type nm-applet [10:26] ^^ === arch_ [n=rmaus@pal-178-241.itap.purdue.edu] has joined #ubuntu [10:26] if i install Ultimate Gamers Edition over my existing, will it erase everything i have downloaded...music, movies etc === adnan__ [n=adnan@82-32-112-22.cable.ubr03.hawk.blueyonder.co.uk] has joined #ubuntu [10:27] at first i was able to connect to my neighbors unencrypted wifi, but not my own, i've also tried it with roaming enabled === Pawn [n=Pawn@89.211.79.175] has joined #ubuntu [10:27] wonderboyjones: by default it does [10:27] My Xorg log says "incompatible kernel module detected - HW accelerated OpenGL will not work", I've referred to "http://doc.ubuntu-fr.org/fglrx" and thought that I did everything right. Does anyone has a hint, please? [10:27] so i need to dump it to another drive? === Villbuntu [n=carey@adsl-149-182-132.btr.bellsouth.net] has joined #ubuntu [10:27] where can I add/remove my home folder & computer icons from my gnome desktop (note: they can't be deleted via del key)? === jfb [n=james@adsl-75-60-245-1.dsl.wotnoh.sbcglobal.net] has joined #ubuntu === jfb_ [n=james@adsl-75-60-245-1.dsl.wotnoh.sbcglobal.net] has joined #ubuntu === Pawn [n=Pawn@89.211.79.175] has left #ubuntu ["Leaving"] [10:27] zAo nothing happens [10:27] @speroni are you using wep or wpa? === jfb [n=james@adsl-75-60-245-1.dsl.wotnoh.sbcglobal.net] has joined #ubuntu [10:27] so I have no choice but to use my onboard to install ubunuto because it cannot detect my video card because there is no way I can turn my onboard video completely off through bios [10:27] something is definitely wrong with my sound, it detected the onboard card, but it just won't work [10:27] zAo^: :/ notthin happens [10:28] so when I get ubunto installed, is there anyway I can configure it so I can read my card later on? [10:28] arch_: you can just drag them from the places menu to your desktop === emmc [n=emmc@host207-192-static.104-80-b.business.telecomitalia.it] has joined #ubuntu [10:28] I'm on ATI Mobile Radeon 9600, and I've install the Linux restricted module corresponding to my kernel. It all stopped to work suddenly === linux2007 [n=1040115C@151.65.39.142] has joined #ubuntu [10:28] pricechild you there? [10:28] everything is setup for wep in my house, but i tried it with wpa as well, id prefer to stick to wep to not have to reconfig everything else though [10:28] adnan__, yes [10:28] cool [10:28] Or can someone indicate a better channel for that kind of problem, please? [10:28] ok i will show u what i got in grub === linux2007 [n=1040115C@151.65.39.142] has left #ubuntu [] [10:28] xyhthyx, what about removing them? === shiznix [i=legends@gentoo/user/shiznix] has joined #ubuntu === helios4 [n=helios@ppp-205-106.33-151.iol.it] has joined #ubuntu === |Lunar_Lamp| [n=Lunar_La@78.86.133.192] has joined #ubuntu === ni1s [n=ni1s@1-1-4-36a.dre.sth.bostream.se] has joined #ubuntu [10:29] arch_: delete them as you would any other file [10:29] how can i get the tty4 output into a file, during the Gutsy installation process? [10:29] Jakyle, on my VIA machine the option is in "Integrated Peripherals" -> "Display Card Priority" [AGP|PCI Slot] (CMOS on that machine is Phoenix AwardBIOS) === Kernel [i=hash@is.a.unixnerd.info] has joined #ubuntu [10:29] zAo^: I get the error log in Xorg.log "(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work" [10:29] root____: in a terminal run: sudo chown -R ~/ [10:29] root____: ah, rebooted? [10:30] I don't that option at all === Pawn [n=Pawn@89.211.79.175] has joined #ubuntu [10:30] xyhthyx, it wont let me delete via delete key, I recall adding them through one of gnome's config managers [10:30] and I couldnt tell you my cmos === lxuser [n=alan@68.113.106.94] has joined #ubuntu === PeterLander [n=landeiro@84.90.90.52] has joined #ubuntu [10:30] zAo^: yes, several times [10:30] @speroni i've had that trouble with a netgear router using wep but i was able to connect to a wpa router just fine === ShadowXP [n=ShadowXP@pool-71-104-126-9.lsanca.dsl-w.verizon.net] has joined #ubuntu [10:30] !pastebin | adnan__ [10:30] adnan__: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic) === m0u5e [n=denniska@c-24-6-100-103.hsd1.ca.comcast.net] has joined #ubuntu === Tribes [n=Tribes@pD9E87AED.dip.t-dialin.net] has joined #ubuntu [10:30] arch_: If you added them from gconf, load up gconf "gconf-editor" in terminal, and travel to app->nautilus->desktop and turn each on/off [10:30] adnan__, please post the entire file, and entire output of that command i gave :) [10:30] zAo^: Do you think that this might be related to some missing permissions on my home folder? [10:30] adnan__, and please keep it in here [10:31] test [10:31] verb3k_: okay have you paired your device [10:31] jowi, but I was wondering if I could later find a way to have ubuntu read my card while I have it installed (note, I am a completely new to linux, reason im getting it is becasue my nasa advisor advesed I get it for comptuer science) === Kill_X [i=kill_x@p5B165609.dip.t-dialin.net] has joined #ubuntu [10:31] ok pricechild [10:31] title Backtrack2 [10:31] root (hd0,3) [10:31] kernel /vmlinuz ro [10:31] boot [10:31] adnan__, please don't paste in here! [10:31] root____: no, the error is related to your ati module version === holden [n=holden@d83-184-29-163.cust.tele2.it] has joined #ubuntu [10:31] @speroni i think it was open wep with 128 bit encryption [10:31] hehe [10:31] sorry === kelsa|martalli [n=bryan@76.77.238.231] has joined #ubuntu [10:31] adnan__, read the message from ubotu === constrictor [n=kaning@5accaaa2.bb.sky.com] has joined #ubuntu [10:31] i tried it with both, neither seems to work [10:31] kk === urthmove1 [n=me@adsl-68-94-224-35.dsl.rcsntx.swbell.net] has joined #ubuntu [10:31] @speroni it just kept asking me the password again and again and not connecting, that with roaming though [10:31] anyone know how to dual boot w/ vista using easyBCD? (exactly how do you use easyBCD -__-) [10:31] sorry # [10:31] zAo^: We're on the same wave length :) [10:31] donkeegan: I don't know ( really sorry) [10:31] Is there a nice theme in green? My favorite part of Suse is the green theme [10:32] root____: installed the version from the ati website or from the repros? === cacaupt [n=cacaupt@bl10-36-100.dsl.telepac.pt] has joined #ubuntu [10:32] i was using 64 hex because my xp puter doesn't seem to support 128 [10:32] zAo^: Unfortunatly, I'm very stupid when it comes to all those ATI/fglx/restricted modules === Java4Ever [n=Vierchas@89.100.63.155] has joined #ubuntu [10:32] zAo^: from the repos === dwood [n=dwood@c-76-16-48-196.hsd1.il.comcast.net] has joined #ubuntu [10:32] anyone actually using the "Ultimate Gamers Edition"? [10:32] @speroni: just checking here what network card do you have? === Malmsdoom [n=flo@emasq.stusta.mhn.de] has joined #ubuntu [10:32] wonderboyjones: not me [10:32] zAo^: from "apt-get install"s [10:32] but thats what its doin, just asking for password over and over === anklav [n=anklav@87.252.227.42] has joined #ubuntu [10:32] xyhthyx, thanks [10:32] hey, theres a bill gates edition now too lo [10:32] lol* === holden [n=holden@d83-184-29-163.cust.tele2.it] has left #ubuntu ["Ex-Chat"] [10:32] Jakyle, that should not be a problem. I suggest you use the alternate install cd to install the OS. [10:33] well on the nokia phone switch bluetooth on then use the right navigation key and go to paired devices . then options new paired device [10:33] zAo^: Do you want me to check something on my box, please? [10:33] microsoft windows is turning into a collectible set now haha [10:33] just wondering if its worth trying out with everything that comes preinstalled [10:33] pricechild http://paste.ubuntu-nl.org/36489/ [10:33] Jakyle, I won't be available for some time (wife need PC, typical haha) [10:33] its a usb wireless.. linksys with an rt2500 driver [10:33] kelsa|martalli: visit www.gnome-look.org and make your own green theme :) [10:33] verb3k_: then enter the pass code should be 1234 as default. [10:33] @speroni yeah that's what happens to me, for me it just happens with one particular router, all the others work fine. It was this stupid netgear router [10:33] root____: did you upgrade ervery package? [10:33] anyone know how to use the EASYBCD bootloader? === Shadowpillar [n=ShadowXP@pool-71-104-126-9.lsanca.dsl-w.verizon.net] has joined #ubuntu [10:33] jowi, lol, its cool which alternate do I use === sebsebseb [n=chatzill@82-46-9-58.cable.ubr05.azte.blueyonder.co.uk] has left #ubuntu [] [10:33] i'd like to get ubuntu dual booting w/ vista, but i want to use EasyBCD rather than grub [10:33] @speroni usb wireless belkin with the same chip [10:33] !alternate | Jakyle (good luck) [10:33] Jakyle (good luck): The Alternate CD (available as of Dapper) is the classical text-mode installation CD. Use it if you wish to upgrade via CD, or for an "expert" mode install. For normal installs, use the Desktop CD, which is also a "Live" CD - See also !Minimal [10:33] do i install it prior to installing feisty? [10:33] zAo^: What do you mean, please? Can ou say it in other words... === meldog [n=matt@noc.myinternetwebhost.com] has joined #ubuntu === vistakiller [n=spiros@ppp220-116.adsl.forthnet.gr] has left #ubuntu [] [10:34] thx Vlet and genii [10:34] Xyhthyx: Ahh, that's so much work, but I will take a look [10:34] i have XP on a different cd....Ubuntu is 10x better imo [10:34] !alternate [10:34] root____: where are you from? :) run: sudo apt-get update ; sudo apt-get upgrade -f [10:34] The Alternate CD (available as of Dapper) is the classical text-mode installation CD. Use it if you wish to upgrade via CD, or for an "expert" mode install. For normal installs, use the Desktop CD, which is also a "Live" CD - See also !Minimal [10:34] different HD [10:34] any idea how to fix it..? === Kookus [n=james@c-76-17-107-204.hsd1.ga.comcast.net] has joined #ubuntu [10:34] m0u5e: grub does a fine job. just installed the two and i am using grub it works fine. === Kookus [n=james@c-76-17-107-204.hsd1.ga.comcast.net] has left #ubuntu ["Ex-Chat"] [10:34] wanna get a small, shitty computer to put XP on [10:34] zAo^: Yes, done now [10:34] Anyone know a reason why my network card would work when booting from the install CD, but not after the install? I checked that I am loading all the same modules, but I get the message "Failed to bring up eth0" [10:35] root____: no packages updated? [10:35] donkeegan: I discovered that gnome-bluetooth package faced a problem and didn't install correctly ..I will install it and If if face the same problem I will report back to you ...thanks for your help :) [10:35] donkeegan: did you first install vista then buntu? [10:35] @speroni: sorry that problem stumped me too, my fix was using my neighbors wifi, but first i had to zap his guard dog first :) === GIn [n=Ginnnn@s5591bc47.adsl.wanadoo.nl] has joined #ubuntu === Thegeektechnique [n=geek@ip70-178-247-42.ks.ks.cox.net] has left #ubuntu [] [10:35] zAo^: (this was already the case, because no install ocured) [10:35] !Minimal | Jakyle [10:35] verb3k_: yw anyways i am off. === plukin [n=kai@dslb-084-057-041-235.pools.arcor-ip.net] has joined #ubuntu [10:35] donkeegan: is there a way to install buntu without installing grub? [10:35] adnan__, back sorry [10:35] i tried follwing the instructions on ubuntu.com for setting it up on wpa and everything, i dunno === iguana [n=guest@85.30.70.48] has joined #ubuntu [10:35] m0u5e: yes i installed vista first as it is easier === iguana is now known as miki23 [10:35] aorry guys maybe someone knows how to fix it? I just tried to install ubuntu via live cd on my laptop,(Amd 64 x2 Vista),but it couldn't initialize graphics system X or something.When I safe graphics mode, it was ok, but the resolution was very low...How to install in a normal way?where cann i get more info about that X system or smth? [10:36] zAo^: I cannot understand why this only happen with other logins than the root [10:36] i can get it to work on my neighbors unencrypted, but i wanted to share files on my own network and such [10:36] adnan__, please pastebin both commands === VonBerserk [n=vonberse@8.86-225-89.dsl.completel.net] has joined #ubuntu [10:36] root____: so dont I :( Do you use GDM to start X? [10:36] oh my, okay, I need help, I am about to install the alternate version ubunutu because I am having technical difficulties with my video, I have no linux expereince, how hard is it going to be for me lol [10:36] I just got a 64-bit processsor. Are there still reasons not to use 64-bit linux? What apps are incompatible? === iguana [n=guest@85.30.70.48] has joined #ubuntu === iguana is now known as miki23 [10:36] anyone suggest any games for Ubuntu? [10:36] !games | wonderboyjones [10:36] wonderboyjones: Information about games on Ubuntu can be found at https://help.ubuntu.com/community/Games and http://www.icculus.org/lgfaq/gamelist.php [10:36] zAo^: Right, under Gnome [10:37] games for ubuntu.....wesnoth? [10:37] wonderboyjones: UT? Quake? [10:37] wonderboyjones: www.happypenguin.com === snocone [n=Anon@216-67-26-203-cdsl-rb2.cwc.acsalaska.net] has joined #ubuntu [10:37] m0u5e: i dont know if you can install ubuntu without grub . sorry. [10:37] ET [10:37] @speroni: sorry i can't help you there, i just switched routers and it seemed to work [10:37] root____: ok, when you restart GDM and try to login, what happens? [10:37] quake wars soon [10:37] pricechild ok === gilles [n=gilles@APoitiers-155-1-7-107.w83-200.abo.wanadoo.fr] has joined #ubuntu [10:37] @urthmove1: sauerbraten, et wolfenstein [10:37] zAo^: I either use the "/etc/init.d/gdm start" or the "startx", the result is the same === yagami [n=yagami@202.1.194.121] has joined #ubuntu [10:37] darn.. [10:37] was thinking about getting em...something to take my time up other than the 360 [10:38] I think the external monitor process and increasing resolution is crappy [10:38] Hi, how do i install mp3 support for amaroK? [10:38] @snocone how is it? === miki23 [n=guest@85.30.70.48] has left #ubuntu ["Ex-Chat"] [10:38] m0u5e: what i did was install vista first . make space for ubuntu and then intalled ubuntu ...and then i edited the grub file in /boot/gub and it recognises the vista [10:38] amarok-engines doesnt seem to solve the problem [10:38] pricechild what two commands do you mean sorry [10:38] root____: the machine just hangs? === ivanhoe_ [n=ivanhoe@189.163.137.191] has joined #ubuntu [10:38] urthmove1: tremulous man [10:38] Adnan_, please pastebin your /boot/grub/menu.lst and "sudo fdisk -l" [10:38] donkeegan: hmm [10:38] UrbenLegend: I did all that, but I don't have internet [10:38] plus, I am installing kde apps separately - don't want the entire beast hording off on my system [10:38] everything seems to be set right === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has joined #ubuntu === _Ulver_ [n=Genebild@20150217190.user.veloxzone.com.br] has joined #ubuntu [10:39] ok, nvm, found the help pages :D [10:39] any news on the new ATI driver yet? [10:39] pricechild ok [10:39] @snocone did you properly modprobe it and remove any other conflicting driver like ndiswrapper [10:39] how do you add things to the xubuntu menu? [10:39] rryan: better to ask why to use 64 bit. if you have a large scale process that needs more than 4 gigs ram 64 bit is the way to go === ebirtaid is now known as diatribe [10:39] UrbenLegend: meaning...? [10:39] m0u5e: if your using feisty i think its even easier cause it will recognise vista and you wont have to edit grub === diatribe is now known as ebirtaid [10:39] zAo^, ati/md have not made it available for download yet === scipio_ [n=c@cpe-75-85-206-61.dc.res.rr.com] has joined #ubuntu [10:39] mike6546: I believe you right-click the menu button to change entries. [10:39] @snocone bcm43xx is a kernel module you have load it with "modprobe bcm43xx" [10:39] atleasts thats what i read. but i havent tried it. i had drapper [10:40] zAo^: I can log in (in the case of a /etc/init.d/gdm start), but the session tries to start, and eventually comes back to the log in display [10:40] thanks === bentob0x [n=laurent@ip-213-49-72-111.dsl.scarlet.be] has joined #ubuntu [10:40] dyrne: *nods* I'm just curious if there are still 'penalties' to not using it... ie I don't think there's a current skype build for 64-bit .. at least that was the case a little bit ago [10:40] UrbenLegend: so I enter 'modprobe bcm43xx' into the terminal? [10:40] root____: hmm. When you use the "vesa" driver, do you have the same problem? === sarthor [n=sarthor@203.99.189.175] has joined #ubuntu [10:40] snocone: modprobe requires root, so use 'sudo modprobe bcm43xx' [10:41] anyone got the motioneye camera running on a sony vaio ? [10:41] ok, will do. [10:41] ouch, someone else has bcm43xx too [10:41] @snocone yes and to make it load on boot you have to edit /etc/modules [10:41] zAo^: Haven't been actually trying, but I guess that with "vesa", it works... === tonyyarusso [n=anthony@ubuntu/member/tonyyarusso] has joined #ubuntu [10:41] how's support for VIA's Chrome9 graphics IGPs? [10:41] zAo^: I can make the test if this is important: tell me, please... === speroni [n=chatzill@cpe-24-24-83-99.stny.res.rr.com] has left #ubuntu [] [10:42] pricechild : http://paste.ubuntu-nl.org/36490/ [10:42] root____: you better try so. If not: try to rename the ~/.gnome and ~/.gconf directories [10:42] snocone: the package 'bcm43xx-fwcutter' automatically installs and loads bcm43xx firmware. === nuup [n=w@chello087206243025.chello.pl] has joined #ubuntu [10:42] heh, the last i checked, that package was broken [10:42] zAo^: Second hint: well thought... === brigante [n=brigante@host86-117-dynamic.60-82-r.retail.telecomitalia.it] has joined #ubuntu === deltaphc [n=Delta@66-215-39-203.dhcp.hspr.ca.charter.com] has joined #ubuntu === urthmove1 [n=me@adsl-68-94-224-35.dsl.rcsntx.swbell.net] has joined #ubuntu === bjuntuz [n=bjuntuz@84-50-135-15-dsl.rkv.estpak.ee] has joined #ubuntu [10:42] hm. how about this: Who here uses 64-bit ubuntu without problems? [10:43] root____: on an OSX machine, but I know some *nix things :) thnx [10:43] adnan__, by the way, you know that in grub, numbers start at 0, wheras on fdisk they start at 1? [10:43] If the download path is broken, can still use fwcutter to load the firmware files. [10:43] @snocone: type lsmod and see if bcm43xx is loaded, and also check if ndiswrapper or any other drive is loaded also === ni1s [n=ni1s@1-1-4-36a.dre.sth.bostream.se] has joined #ubuntu [10:43] pricechild i know that === Taffy-nay [n=chatzill@cpc2-sout4-0-0-cust910.sotn.cable.ntl.com] has joined #ubuntu === ebirtaid is now known as diatribe === meEET [n=me@adsl-70-224-40-235.dsl.sbndin.ameritech.net] has joined #ubuntu === Timbooo [n=Goatsex@adsl-76-192-229-166.dsl.austtx.sbcglobal.net] has joined #ubuntu [10:43] where do I go to do the alternate instillation of ubuntu? === maelcum [n=horst@ti100710a080-6877.bb.online.no] has joined #ubuntu === sc0tty [n=yann@host217-39-179-185.in-addr.btopenworld.com] has joined #ubuntu [10:43] zAo^: Also on OS X and Windows as well [10:43] pricechid is that the same for paritions too? === Schatz [n=schatz@32.59.49.83] has joined #ubuntu [10:44] @Xyhthyx: he said he already did that, so i am wondering if its just the bcm43xx module is not loading up or there's a conflicting driver [10:44] Jakyle, same place as normal === verb3k_ [n=verb@87.109.225.220] has left #ubuntu [] [10:44] ok, so I need to do sudo modprobe bcm43xx and lsmon... anything else? [10:44] pricechild: same for partions too? [10:44] root____: no windows here ;) [10:44] the download site? [10:44] @snocone lsmod [10:44] UrbenLegend: Ah kk. [10:44] hmm, maybe I missed it [10:44] ya, typo :) [10:44] I installed only ubuntu-minimal so I could learn abit more on Ubuntu and have greater control, now I'm wondering what to apt-get to get the fancy boot splash, or is it too late? [10:44] has anyone here had any issues with the most recent compiz-fusion update via apt? [10:44] pricechild: basically my other distro is on sda3 [10:44] How can I make screen auto run when I open terminal? [10:44] zAo^: Know that :) Just discovered that I'm also running out of hard drive space :( [10:44] @snocone yeah try loading it and connecting and check if ndiswrapper is present or not, if it is something not right [10:44] I'd like to use it as my shell === yagami [n=yagami@202.1.194.121] has left #ubuntu [] [10:45] adnan__, yes, so in grub, it would be hd(0,2) [10:45] I have problems with broadcom drivers too [10:45] ni1s, sudo apt-get install usplash [10:45] root____: lol hmm... /dev/disk0s2 434G 307G 127G 71% / [10:45] z0rz, $ some-terminal -e(usally) screen ? [10:45] The forum has a great howto on bcm43x. [10:45] pricechild: ok, but do you think everything else i entered there for that distro looks correct? === yagami [n=yagami@202.1.194.121] has joined #ubuntu [10:45] amias, thanks [10:45] root____: gonna smoke, brb === ckin2001 [n=ckin2001@74-136-201-52.dhcp.insightbb.com] has joined #ubuntu [10:45] whats a similar tool to windows-search/google desktop search for ubuntu? === diatribe is now known as ebirtaid [10:46] hello! massive problems installing ubuntu gutsy (and hardy) on a compaq 6910p - X doesn't work, no wireless and no cd either. integrated intel graphics, intel ata & sata controllers and intel wireless. what the fuck happened to the usually nice linux support of intel hardware? === Keule|On [n=keule@p57BBE153.dip.t-dialin.net] has joined #ubuntu [10:46] @yagami: beagle? [10:46] hi there === tyoc [n=ubuntu@189.181.154.40] has left #ubuntu [] [10:46] yagami: beagle. [10:46] !gutsy | maelcum [10:46] maelcum: Gutsy Gibbon is the code name for the next release of Ubuntu (7.10) | (due October 2007) | It is development software, as such unstable, support _only_ in #ubuntu+1 [10:46] ok === JonJ [n=doublej@host-81-191-141-42.bluecom.no] has joined #ubuntu [10:46] how can i reinstall my usb things after failure === ebirtaid is now known as diatribe [10:46] adnan__, depends where the kernel is === YeTr2 [n=yetr2@pool-71-180-26-32.tampfl.fios.verizon.net] has joined #ubuntu [10:46] maelcu, . same happened to me with my Hp pavilion laptop [10:46] maelcum: hardy doesn't even exist yet - that may be part of the issue. [10:46] damn it, keep using emerge isntead of apt-get [10:46] ni1s, the install options just install a larger or lesser amount of packages , you add and remove as you please (dependencies permitting) === KevinOman [n=kevin@66-227-221-83.dhcp.klmz.mi.charter.com] has left #ubuntu [] === bentob0x [n=laurent@ip-213-49-72-111.dsl.scarlet.be] has joined #ubuntu [10:46] maelcum: 1) watch the language, 2) gutsy help only in #ubuntu+1 === sarthor [n=sarthor@203.99.188.19] has joined #ubuntu [10:47] tonyyarusso: oopsie. i mean gutsy and/or . [10:47] yagami: lol. I kept using yum when I first switched. [10:47] pricechild: well i will check and make modifications i will reboot soon and be back hope you don't mind me asking for your help on this i appreciate it [10:47] there are just too many names, and i'm using ubuntu for about two years now :) [10:47] maelcum: feisty ;) [10:47] adnan__, cya soon :) [10:47] well, this isnt my first time- i just use ubuntu when I need a quick fix ;) [10:47] Keule|On, what does lsmod | grep usb show? [10:47] :) === echo4mic_IRC [n=john@c-71-229-208-210.hsd1.co.comcast.net] has joined #ubuntu === lizard_ [n=lizard@host-84-9-199-37.bulldogdsl.com] has joined #ubuntu === Taffy-nay [n=chatzill@cpc2-sout4-0-0-cust910.sotn.cable.ntl.com] has left #ubuntu [] [10:48] Hi, using feisty, my computer have builtin lan card and configured as eth0, Now i have disabled that lan from bios, now i want my ubuntu to configure my other lan card as eth0, but it configured as eth1, Help === zlittell [n=zlittell@216-176-158-120.adsl.netnitco.net] has joined #ubuntu === gardar [n=gardar@dsl-212-199.hive.is] has joined #ubuntu === urthmover [n=me@adsl-68-94-224-35.dsl.rcsntx.swbell.net] has joined #ubuntu [10:48] maelcum, the hard disk device names have changed with the new kernel [10:48] nbkr: usbhid 26720 0 [10:48] hid 27392 1 usbhid [10:48] usbcore 135048 4 usbhid,ehci_hcd,uhci_hcd === Pici- [n=Pici@ool-4355be00.dyn.optonline.net] has joined #ubuntu === AntiMoon [n=michel@90-227-247-138-no120.tbcn.telia.com] has joined #ubuntu [10:48] okay, so let's talk about feisty. this compaq 6910 is very new and only the text mode installer works (X problems). [10:48] btw... i use ubuntustudio [10:48] sarthor: It doesn't work as eth1? [10:48] Keule|On, Everything right with this. So whats the problem with your USB devices? === MTecknology [n=MTecknol@host-82-211-220-24.midco.net] has joined #ubuntu [10:49] Xyhthyx, in my bandwidth shaper. i have to change about 250 files. coz i have put there eth0, so thats Y. Other wise it works === no_gatez_fan [n=patrick@cpe-069-132-015-252.carolina.res.rr.com] has joined #ubuntu [10:49] nothing works - the mouse is off === _GoRDoN_ [n=heikki@a88-112-169-13.elisa-laajakaista.fi] has joined #ubuntu [10:49] amias: the funny thing is that there is *no* cd device at all in /dev. no hda (which is written in /etc/fstab), no sd, no sg. nothing. [10:49] the red led is of [10:49] f === ltar [n=chuck@res248122.resnet.wsu.edu] has joined #ubuntu [10:49] the hubs doesnt work === croweboy [n=chris@c-69-243-189-186.hsd1.in.comcast.net] has joined #ubuntu === SmoothOp [n=no@c-71-58-57-168.hsd1.pa.comcast.net] has joined #ubuntu [10:49] !bootoptions > maelcum (please check message from bot - this one is for booting it with gui) [10:49] i can never keep the names straight. What is 7.04? [10:50] the usb-harddisk runs but is not mountable [10:50] !wireless > maelcum (please check message from bot - wireless kinda obvious) [10:50] ltar, the feisty fawn [10:50] what's wrong with that X? [10:50] Keule|On, Anything in the logs when you add a new device? [10:50] maelcum, sounds like your udev is hosed , does dmesg look normal ? [10:50] iter, it is easy -- 7.04 Year 7 Month 4 [10:50] sarthor: http://www.science.uva.nl/research/air/wiki/LogicalInterfaceNames [10:50] in the logs? [10:50] anyone that is a PxE master should start a chat with me [10:50] sarthor: Hope that is some help. [10:51] Xyhthyx, thank you brother, [10:51] amias: i think so, except that if i grep for "optical", "cd-rom" and so on, nothing shows up. === locke [n=locke@210.185.airpt.anc.borealisbroadband.net] has joined #ubuntu [10:51] (looking for module load messages) === Rosiel [n=rosiel@dslb-084-063-166-249.pools.arcor-ip.net] has joined #ubuntu [10:51] iter, since dapper all are alphabetical testing is g and release is f [10:51] Keule|On, Yeah, the Logfiles of the system /var/log/messages for example. [10:52] tail /var/logs/messages in a separate window, uninsert and then reinsert usb drive [10:52] zAo^: Making a new test. brb === recon [n=recon@wikipedia/recon0] has joined #ubuntu === Heady [n=heady@adsl-dyn9.91-127-97.t-com.sk] has joined #ubuntu [10:52] maelcum, eek , doesn't sound good , i am dist-upgrading at the moment ! === unagi [n=unagi@015-995-929.area7.spcsdns.net] has joined #ubuntu === skkane [n=skkane@89.33.59.156] has joined #ubuntu [10:52] anyone know of a good sync application between windows and linux? [10:52] amias: don't worry. it doesn't work with any version we tried here, so if it worked before it probably still works for you... === Sonderblade [n=fsldfj@host-n81-188.homerun.telia.com] has joined #ubuntu [10:53] has ubuntu found a fix for the hibernation problem? [10:53] im installing java [10:53] m0u5e, unison ? [10:53] and on the licence agreement === Iacobus [n=francisc@212.145.173.174] has joined #ubuntu [10:53] in the terminal [10:53] I don't know what to do! [10:53] unagi: I've been hibernating for months using 'sudo hibernate' [10:53] root____: b [10:53] just press space [10:53] nbkr: have you used unison to sync bewteen win and linux computers before? :D [10:53] unagi: install 'hibernate' package first ;) === noldrys [n=noldrys@p54BDFF61.dip.t-dialin.net] has joined #ubuntu === mycroes [n=mycroes@a80-100-182-41.adsl.xs4all.nl] has joined #ubuntu [10:53] m0u5e: unison is fine though ive never cared for it. its good for end users [10:53] nbkr: i think nothing happens === pyCube [n=jmayfiel@ip70-162-117-219.ph.ph.cox.net] has joined #ubuntu [10:53] Urilockz: have you hit "right" then "enter" yet? [10:53] !info hibernate === pyCube [n=jmayfiel@ip70-162-117-219.ph.ph.cox.net] has left #ubuntu ["Ex-Chat"] === snocone [n=Anon@216-67-26-203-cdsl-rb2.cwc.acsalaska.net] has joined #ubuntu [10:53] hibernate: smartly puts your computer to sleep (suspend to RAM or disk). In component universe, is extra. Version 1.94-2 (feisty), package size 84 kB, installed size 424 kB === Ademan [n=dan@h-67-101-40-146.snfccasy.dynamic.covad.net] has joined #ubuntu [10:54] m0u5e, A few times. === speron2 [n=speroni@cpe-24-24-83-99.stny.res.rr.com] has joined #ubuntu [10:54] oh thanks [10:54] it worked [10:54] Keule|On, There has to be anything. === vecnah [n=vecna@vecna.vecnix.net] has joined #ubuntu === itchy_militia [n=ItchyMil@c-76-108-66-65.hsd1.fl.comcast.net] has joined #ubuntu [10:54] UrbenLegend: ok so if modprobe appears to do nothing, what does that mean? === diafic [n=Greyscal@host86-141-96-149.range86-141.btcentralplus.com] has joined #ubuntu [10:54] i dont know what === savetheWorld [n=Lester@about/linux/staff/savetheWorld] has joined #ubuntu [10:54] im a newbee === PeterLander [n=landeiro@84.90.90.52] has left #ubuntu [] [10:54] huh [10:54] @snocone that means it worked === Thegeektechnique [n=geek@ip70-178-247-42.ks.ks.cox.net] has joined #ubuntu [10:55] @snocone what does lsmod give you [10:55] Keule|On, Just some additional lines in that file after you plugged the usb device in. [10:55] UrbenLegend: what's with the @snocone? [10:55] can you set sudo hibernate to execute when you press the sleep button? [10:55] im trying to do an install on a laptop and have to network boot... i can only get shell but want to do a full install over network... im soooo confused [10:55] @recon i was talking to him === sarthor [n=sarthor@116.71.161.86] has joined #ubuntu [10:55] UrbenLegend: oh, thought it was a bot command or something. [10:55] HEy I have amd based HP laptop and X system doesn't want to load at all, should i get drivers or smth? [10:55] @recon its just my way of specifying who i am talking too cuz these things go way too fast [10:56] ive been dissapointed in amd lately =( [10:56] Java4Ever: what model? === Milux [n=Milux@host-84-221-116-4.cust-adsl.tiscali.it] has joined #ubuntu === Iacobus [n=francisc@212.145.173.174] has left #ubuntu ["Saliendo"] [10:56] UrbenLegend: I couldn't see ndiswrapper (?) anywhere in the list [10:56] nbkr: nothing [10:56] Java4Ever: doesnt load using vesa? is xorg set to use lappys native resolution? [10:56] UrbenLegend: ok. but usually, most people use "Nick:" or "Nick,". [10:56] really [10:56] unagi: I don't know how, but there has to be a way :p === ConstyXIV [n=Andrew@74-128-189-16.dhcp.insightbb.com] has left #ubuntu [] [10:56] unagi: why? they just released new ATI drivers for linux... === john [n=johnsie@cpc3-bele3-0-0-cust500.belf.cable.ntl.com] has joined #ubuntu === gazzerh [n=garryh@host-212-158-227-149.bulldogdsl.com] has joined #ubuntu === skkane [n=skkane@89.33.59.156] has left #ubuntu ["Leaving"] [10:57] Recon: yeah i know its just that sometimes its confusing cuz i think the one being targeted is the person speaking [10:57] GNEA hp dv 6527ea === justin535431321 [n=ubuntu@166-82-11-10.quickclick.ctc.net] has joined #ubuntu === vecnah [n=vecna@82.67.85.105] has joined #ubuntu [10:57] @snocone okay so after modprobe did you try connecting ? === ^TalKz [n=_TalKz@DSL217-132-42-59.bb.netvision.net.il] has joined #ubuntu === ni1s [n=ni1s@1-1-4-36a.dre.sth.bostream.se] has joined #ubuntu [10:57] because amd sold info to intel making the core duos possible and ever since then amd hasnt been able to hit the mark [10:57] yeah, it didn't work. [10:57] dyrne where to get vesa drivers and where to find xorg:) [10:57] @snocone are you using roaming or regular connect [10:57] i know i am lame but help me [10:58] what is roaming anyway? [10:58] hi, the fonts in my gnome are too small unless I start ubuntu in single user mode. Anyone know whats wrong? [10:58] <^TalKz> hello all, there is any way to download defualt/restore the orginal xorg.conf file ? [10:58] @snocone using network manager [10:58] anyone here use maya? === lomper [n=lomper@p54B786C2.dip0.t-ipconnect.de] has joined #ubuntu [10:58] I didn't have it checked, because I'd never heard it before === RT [i=jupiter4@ppp85-141-234-221.pppoe.mtu-net.ru] has joined #ubuntu === ion [n=ion@70-58-119-250.phnx.qwest.net] has joined #ubuntu [10:58] Java4Ever: all that is already installed. basically you may just need to do a 'sudo dpkg-reconfigure xserver-xorg' and choose vesa as the driver then the resolution you want. hit enter to select default for stuff you dont know [10:58] john: not really, but you could go to System: Preferences: Font, and adjust the settings as needed. [10:58] Java4Ever: isn't that using an nvidia video chipset? === RT [i=jupiter4@ppp85-141-234-221.pppoe.mtu-net.ru] has left #ubuntu [] [10:58] when I start gtk apps on a remote X server (Xming) the app stalls for a long time, strace reveals it's apparently doing a connect... [10:58] Java4Ever: nvidia has very good linux support btw === lomper [n=lomper@p54B786C2.dip0.t-ipconnect.de] has left #ubuntu ["Ex-Chat"] [10:58] connect(15, {sa_family=AF_INET, sin_port=htons(16001), sin_addr=inet_addr("192.168.11.1")}, 16 === vecnah [n=vecna@vecna.vecnix.net] has joined #ubuntu [10:59] anybody has any clue what it could be? [10:59] gnea yes, i have nvidia card [10:59] Keule|On, What does lsusb show? [10:59] snocone: sorry about the so many restarts but could you try getting the lsmod output into a pastebin? === soccermike1337 [n=michael@cpe-72-184-113-147.tampabay.res.rr.com] has joined #ubuntu [10:59] hey if im installing ubuntu on one partition at /dev/sdb1 where would i install grub by default it appears that the installer wants to install it to /dev/hd0 which when i restart comes up saying "error loading operating system" === green_earz [n=admin@213-232-83-67.dsl.prodigynet.co.uk] has joined #ubuntu [10:59] UrbenLegend: ok, will do [10:59] Java4Ever: then you do NOT want to use the vesa driver - use nv [10:59] snocone: and try using roaming mode and connecting through networkmanager, that's how i got it to work [10:59] nvidia binray drivers? [11:00] Java4Ever: vesa and nvidia do not get along [11:00] ok [11:00] ubotu, !bootprompt -> john [11:00] Java4Ever: well, use nv for now, then upgrade to the binary drivers once you have the desktop up and running (there's a special ubuntu method for it) [11:00] Gnea, vesa's kind of a standard... what card doesn't work with it? [11:00] Gnea, it's just nvidia that's not getting along ;) [11:00] nbkr: Bus 005 Device 001: ID 0000:0000 [11:00] Bus 004 Device 001: ID 0000:0000 [11:00] Bus 003 Device 001: ID 0000:0000 [11:00] Bus 002 Device 001: ID 0000:0000 [11:00] Bus 001 Device 001: ID 0000:0000 [11:00] thats all [11:00] !paste | Keule|On [11:00] Keule|On: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the #ubuntu channel topic) [11:01] is here someone from germany who can help me with compiz fusion and a nvidia 8600gt? [11:01] i know - sorrry === barata [n=potlot@208-106-104-49.dsl.dynamic.sonic.net] has joined #ubuntu [11:01] <^TalKz> also, how can i dual boot with windows xp ?... any idea? [11:01] <^TalKz> run windows xp on my ubuntu [11:01] anybody uses festival and loquendo TTS? === usser [n=dmitry@ool-18b8e9e6.dyn.optonline.net] has joined #ubuntu [11:01] justin535431321: you dual booting with xp or 2 diff distros? [11:01] PriceChild: he's got a brand-spanking new HP laptop and is trying to load the VESA X driver on it - he needs to use NV in order for it to work [11:01] Keule|On, Ok - no USB Device there. Did it ever work? [11:01] Java4Ever: the basic nvidia binary install is 1) sudo apt-get install nvidia-glx; sudo nvidia-xconfig; sudo /etc/init.d/gdm restart but it can depend if you have a really new or really old card [11:01] Gnea, why? [11:02] Gnea, again what card is it? [11:02] yes it did [11:02] PriceChild: most likely because it's so new that it's incompatible with the vesa. he said X isn't working at all. [11:02] and ther are a mouse connected [11:02] PriceChild: it's an nvidia. [11:02] tat bootprompt returned no results [11:02] *head desks and moves on* === stefano [n=stefano@190.80.219.80] has joined #ubuntu [11:02] gnuskool_: no just ubuntu. [11:02] after a restart it wont work [11:02] <^TalKz> i have windows xp, and ubuntu. i want to run windows xp on my ubuntu... is it possible? === kalisto [n=kalisto@a80-127-73-194.adsl.xs4all.nl] has joined #ubuntu === doddi [n=mark@dyn-62-56-119-161.dslaccess.co.uk] has joined #ubuntu === Iacobus [n=francisc@212.145.173.174] has joined #ubuntu === manikfox [n=manikfox@d226-26-220.home.cgocable.net] has joined #ubuntu === LordDragonSlayer [n=ryan@ool-44c22d0d.dyn.optonline.net] has joined #ubuntu [11:02] how do i find out about the network card an ubuntu distribution supports? [11:02] ^TalKz, virtualise or dual boot? === green_earz [n=admin@213-232-83-67.dsl.prodigynet.co.uk] has left #ubuntu ["Konversation] [11:02] PriceChild: Video adapter [11:02] Keule|On, What did you before that restart? Any updates or system changes? [11:02] <^TalKz> virtualise [11:02] oops [11:03] NVIDIA GeForce\u2122 7150M [11:03] stefano, best bet is to boot a live cd on whatever hardware has it, and see if it works [11:03] straight from hp's website === MOTZ [n=riefler@83-215-155-58.hage.dyn.salzburg-online.at] has joined #ubuntu [11:03] justin535431321: is it all on the same partition, or do you have more than 1? [11:03] never knew that one existed :S [11:03] ^TalKz, Use virtualbox, qemu or vmware for that. [11:03] nope just one partition gnuskool === lomper [n=lomper@p54B786C2.dip0.t-ipconnect.de] has joined #ubuntu === moi_ [n=moi@AToulouse-257-1-104-76.w82-125.abo.wanadoo.fr] has joined #ubuntu [11:03] any guilde for broadcom 4311 on feisty ? === G-Lin [n=dpaulet@ANancy-257-1-157-128.w90-40.abo.wanadoo.fr] has joined #ubuntu [11:03] PriceChild, does ubuntu have any history supporting Nexxt cards? [11:03] Gnea: hm hard to believe something can be incompatible with vesa [11:03] <^TalKz> is it easy? can i install and configure it buy add/remove button? [11:03] bonsoir [11:03] PriceChild: i agree that vesa *should* work with it, but he might as well just use the standard nv === juasmas [n=juasmas@87.216.169.145] has joined #ubuntu [11:04] ^TalKz: i like vmware-server which is free from their site for linux but you might also google seamless desktop for ubuntu which is basiclly qemu and rdesktop [11:04] i have 250 file for in my /etc/shaper for each of my netowrk user, I have to change my eth0 to eth1, Can i do this by any single commad?? my files sample is here http://paste.ubuntu-nl.org/36492/ [11:04] Its definitely not "too new" for it to not work on it... :S [11:04] hi [11:04] ^TalKz: no, it's a bit more involved than that [11:04] I wish Fullscreen (F11) on Firefox (and most applications) still allowed whatever is designated to be Always on top to show as well....like Firefox big with a little irssi window in the lower left [11:04] MOTZ: Search ubuntuforums.org for "howto broadcom bcm43xx" [11:04] i wanted to install my dvb-t card [11:04] can anybody invite me to good torrent tracker ? === P_Kable [n=P_Kable@ip68-228-32-205.tc.ph.cox.net] has joined #ubuntu === G-Lin [n=dpaulet@ANancy-257-1-157-128.w90-40.abo.wanadoo.fr] has joined #ubuntu [11:04] i d be very gratefull [11:04] PriceChild: he said it wasn't working, i provided a solution that will work. :) [11:04] MOTZ: http://ubuntuforums.org/showthread.php?p=1071920&mode=linear [11:04] i hate to do this but why do i only install a minimal shell ubuntu when i use PxE [11:04] ^TalKz: not sure what easiest app would be === johndarc [n=john@ACaen-157-1-133-188.w90-17.abo.wanadoo.fr] has joined #ubuntu [11:04] ^TalKz, If you activate the commerical repository of Ubuntu and you're running feisty you should be able to install VMware. But you will need a license from vmware.com (for free). [11:04] <^TalKz> once i've done something with vmware and its scored up all my boot loading [11:04] <^TalKz> :/ === File13 [n=File13@adsl-66-139-218-30.dsl.rcsntx.swbell.net] has joined #ubuntu === kalisto [n=kalisto@a80-127-73-194.adsl.xs4all.nl] has joined #ubuntu === lomper [n=lomper@p54B786C2.dip0.t-ipconnect.de] has left #ubuntu [] === juasmas [n=juasmas@145.169.216.87.dynamic.jazztel.es] has joined #ubuntu === simmerz [n=simmerz@111.88.155.90.in-addr.arpa] has joined #ubuntu [11:05] salut === Kopfgeldjaeger [n=nicolai@p54AD554F.dip.t-dialin.net] has joined #ubuntu [11:05] CAN ANYONE INVITE ME TO TORRENT SITE ? [11:05] Gnea, ok cool [11:05] MOTZ: i have the bcm4318 in my compaq, but even after getting it to work for some reason I had to be really close to the wireless access point to connect === Kaur [n=kaur@87.98.122.38] has joined #ubuntu [11:05] <^TalKz> so what are you recommending on? [11:05] welcome nuup )) [11:05] nuup: i invite you to isohunt. come on in [11:05] MOTZ: i just broke down and bought a $20 wireless usb adapter [11:05] gnuskool_: nah it's all on one partition === fujin_ [n=aj@unaffiliated/fujin] has joined #ubuntu [11:05] it sucks [11:05] ;p [11:05] i need to dl windows xp [11:05] nuup, releases.ubuntu.com has torrents availiable there [11:05] Hi [11:05] !piracy | nuup [11:05] nuup: piracy discussion and other questionably legal practices are not welcome in the Ubuntu channels. Please take this discussion elsewhere or abstain from it altogether. This includes linking to pirated software, music and video. Also see !guidelines and !o4o [11:05] rly fast [11:06] ptn107: Yeah, the bcm43xx module has very short range. Using ndiswrapper you get twice the range. [11:06] ;p [11:06] Keule|On, So what did you do to install the dvb-t card? [11:06] list === root____ [n=chatzill@bdv75-2-81-57-250-95.fbx.proxad.net] has joined #ubuntu [11:06] is it normal that dmesg is full of ata1: soft resetting port? [11:06] so sad [11:06] zAo^: b [11:06] i got ubuntu so theres no need to tell me abaout that [11:06] ;/ [11:06] gnea if i have nvida 7150 should i type nvidia-glx?(for legacy nvidia cards)? [11:06] Xyhthyx: yeah but for some reason I could never get it to work, wish that it did === christopher_ [n=manikfox@d226-26-220.home.cgocable.net] has joined #ubuntu === Kopfgeldjaeger [n=nicolai@p54AD554F.dip.t-dialin.net] has joined #ubuntu [11:07] Kaur: no [11:07] zAo^: too bad. The Gnome directories have even not been recreated [11:07] zAo^: Going for the vesa now [11:07] @ptn107: yeah it also has problems with the speed cuz the tx power is low, so its gets stuck at 11 mbps === nike^^ [i=nike__@host36-143-dynamic.12-87-r.retail.telecomitalia.it] has joined #ubuntu [11:07] hi [11:07] zAo^: But first, make a Synaptic re-install of all the fglrx stuff [11:07] root____: did you check the permissions!? gnome NEEDS to recreate it [11:07] usser: of course it's not the only message in there but still... It also says something about my hdd. What should I do? === pyrak [n=pyrak@ip68-109-193-64.pv.oc.cox.net] has joined #ubuntu [11:08] <^TalKz> ammm, another question... i have ubuntu on my pc. i have web server on other linux machine called "Linuxlab" (@CentOS)... any idea how can i open files from linux lab machine? [11:08] anyone from italy? [11:08] nuup: /join #ubuntu-offtopic [11:08] <^TalKz> thanks by the way to all of you.. :) [11:08] !it | nike^^ [11:08] nike^^: Vai su #ubuntu-it o su #kubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! === GPGEEK [n=joe@adsl-76-241-161-65.dsl.sfldmi.sbcglobal.net] has left #ubuntu [] [11:08] already worked but was an 5h work lol [11:08] I set my login user as recursive owner of its home directory === mike6546 [n=mike@cpe-74-77-44-166.buffalo.res.rr.com] has left #ubuntu [] [11:08] can someone point me in the right direction for isntalling the official nvidia drivers [11:08] root____: that should do the trick [11:08] !nvidia [11:08] To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto === z0TK is now known as z0TK| [11:08] Kaur: i dont know i only remember i had that when i plugged in faulty dvd drive and it lead to maaaad slow boot up, it was constantly resetting ATA [11:09] root____: did a "sudo chmod -R o+rwx ~/"? [11:09] unagi: also might do a google seach like 'site:ubuntuforums.org nvidia latest feisty' or somesuch [11:09] ^TalKz, ssh ? [11:09] usser: K === kalis_bliumkvist [n=patrimpa@ctv-213-164-102-136.vinita.lt] has joined #ubuntu === kris [n=kris@host81-132-222-107.range81-132.btcentralplus.com] has joined #ubuntu === fiveofoh [n=Owner@69-10-206-74.localaccess.com] has joined #ubuntu [11:09] ^TalKz, you could scp them - see man scp [11:09] Does anyone know why my samba ADS join would be dropping off when I reboot my machine, and how I can make it stay joined, or join on startup? [11:09] nbkr: i dont know [11:09] http://wiki.ubuntuusers.de/em28xx [11:09] i did this steps === adnan_ [n=adnan@82-32-112-22.cable.ubr03.hawk.blueyonder.co.uk] has joined #ubuntu === At0mic_PC [n=arch_ato@host-216-76-226-33.jan.bellsouth.net] has joined #ubuntu [11:09] but i did some other things.... [11:09] Hello everyone. [11:09] zAo^: brb [11:09] <^TalKz> coz i am using Zend studio, and all i get is the list of my linux's HD === nuup [n=w@chello087206243025.chello.pl] has left #ubuntu ["Ex-Chat"] === lImItaO [n=Adrian@212.145.180.165] has joined #ubuntu === POVaddct [n=chris@p54B37A6B.dip.t-dialin.net] has joined #ubuntu [11:10] <^TalKz> i cant press smb://linuxlab ... [11:10] why does apparmor work when i install and configure it, but not after i reboot?? [11:10] pricechild: i am almost there i got it to boot the bt2 distro but it throwed up a kernel panic saying please specify root= and i guess thats pretty much self explanatory so i will try that now === WaxyFres1 [n=r00t@199-2-59-123.dsl.dynamic.uninets.net] has left #ubuntu [] [11:10] justin535431321: type sudo fdisk -l into terminal, paste into pastebin [11:10] ^TalKz: try Places -> Connect to Server [11:10] anybody knows how to use winmodem netodragon? [11:10] adnan_, ok cool, should just be keeping the same format as the ubuntu ones above [11:11] Keule|On, Naja - some other things - da wirds dann schwierig. Scheint so als httest Du ein paar Kernelmodule abgeschossen. [11:11] <^TalKz> amias [11:11] pricechild: ok dude === MOTZ [n=riefler@83-215-155-58.hage.dyn.salzburg-online.at] has left #ubuntu [] [11:11] <^TalKz> amias: i've done it, and i got a "Web" dir... but i cant reach it by file->open === emosamurai [n=emosamur@66-168-78-220.dhcp.fdul.wi.charter.com] has joined #ubuntu [11:11] pricechild: see you in a few mins again [11:11] nbkr: und wie kann ich die wieder reinschieen? === ogra [n=ogra@ubuntu/member/ogra] has joined #ubuntu [11:12] ^TalKz : its something that needs sorting out in gnome [11:12] Keule|On, #ubuntu-de ... === bascule [n=kenny@89.240.149.58] has joined #ubuntu === kekZpriester [n=luc@DSL01.212.114.230.166.ip-pool.NEFkom.net] has joined #ubuntu [11:13] Heya. I got mPlayer to work, but I want it to play the DVD when I insert it instead of Totem. What's the command I put in the Preferences window? I know that to get Totem to work, you put in Totem %m, but what do you do for mPlayer? === zAo^ is now known as zAo^AfK === AskHL [n=ask@82.211.198.209] has joined #ubuntu === DrBanzai [n=DrBanzai@h216-170-017-249.adsl.navix.net] has joined #ubuntu === XanKriegor [n=roma@ppp83-237-240-74.pppoe.mtu-net.ru] has joined #ubuntu [11:13] ugh this sucks === enemy [n=enemy@p549EC309.dip0.t-ipconnect.de] has joined #ubuntu [11:13] gnuskool_: http://rafb.net/p/zOesjD22.html [11:13] emosamurai: Try mPlayer %m? === [LUCIAN] [n=[LUCIAN] @cpe-24-166-5-163.indy.res.rr.com] has joined #ubuntu [11:13] http://lists.beatniksoftware.com/pipermail/tomboy-list-beatniksoftware.com/2007-September/000374.html === strent_ [n=bauerf@dslb-084-058-196-008.pools.arcor-ip.net] has joined #ubuntu [11:14] Ubuntu: Linux for Monks === miles [n=miles@ABordeaux-156-1-38-216.w86-217.abo.wanadoo.fr] has joined #ubuntu [11:14] ^^ O_o [11:14] Nope. === Devo [n=devo@pool-71-170-241-80.dllstx.fios.verizon.net] has joined #ubuntu [11:14] what do those %? mean in application launchers, I have seen m and d and u ? [11:14] cyphase, sudo apt-get install girlfriend === n00dl3 [n=ctrlx@c-66-176-40-185.hsd1.fl.comcast.net] has joined #ubuntu === i3d_ [n=i3dmaste@72.14.227.1] has joined #ubuntu [11:14] flamebait :P [11:14] amias, uha ha [11:14] amias: uhh.. why do i supposedly not have a girlfriend === elaiel [n=michael@p54A77E2F.dip.t-dialin.net] has joined #ubuntu === DGJ_ is now known as DGJ [11:15] The % just refers to an argument [11:15] am i to busy thinking up ubuntu slogans ;) === Xera [n=jamie@79-65-165-156.dynamic.dsl.as9105.com] has joined #ubuntu [11:15] I'm looking for current information regarding the use of a Promise sx4000 PATA Raid controller under Linux. Can anybody here help me, please? [11:15] cyphase, heh === rororor [n=sciay@host252-184-dynamic.10-87-r.retail.telecomitalia.it] has joined #ubuntu === Pawn [n=Pawn@89.211.79.175] has joined #ubuntu === blastermaster [n=blasterm@adsl-64-237-221-188.prtc.net] has joined #ubuntu [11:15] yeah but it is somehow meaningful, is it? or could i just say %V and get Wy with it === rororor [n=sciay@host252-184-dynamic.10-87-r.retail.telecomitalia.it] has left #ubuntu ["Ex-Chat"] [11:15] ? [11:15] I compiled Lua 5.1.2(Very stupid idea) and have no idea how to remove it (The makefile has no remove or uninstall option), anybody know how? === barto [n=barto@APlessis-Bouchard-151-1-15-23.w82-121.abo.wanadoo.fr] has joined #ubuntu [11:16] Lua, Garry's Mod made that. === meEET [n=me@adsl-70-224-40-235.dsl.sbndin.ameritech.net] has joined #ubuntu [11:16] XanKriegor: cruos uahs metos [11:16] as in made it popular... === AntiMoon [n=michel@90-227-247-138-no120.tbcn.telia.com] has joined #ubuntu [11:16] Heh, yeah === alvin [n=alvin@12.207.127.195] has joined #ubuntu === diafic_ [n=Greyscal@host86-145-24-126.range86-145.btcentralplus.com] has joined #ubuntu === adnan_ [n=adnan@82-32-112-22.cable.ubr03.hawk.blueyonder.co.uk] has joined #ubuntu [11:17] I would make my IRC bot in GM Lua but I'd rather do it stand-alone.. === barata [n=potlot@208-106-104-49.dsl.dynamic.sonic.net] has left #ubuntu ["Ex-Chat"] [11:17] pricechild: i am having problems :( [11:17] === ryan8403 [n=ryan8403@rrcs-70-62-254-122.central.biz.rr.com] has joined #ubuntu [11:17] cyphase, What it mean ? === buttercups [n=me@adsl-70-224-40-235.dsl.sbndin.ameritech.net] has joined #ubuntu === Jack_Sparrow [n=jack@adsl-69-227-94-40.dsl.sndg02.pacbell.net] has joined #Ubuntu === nilsjoa [n=nerdiger@i59F716C7.versanet.de] has joined #ubuntu === ryan8403 [n=ryan8403@rrcs-70-62-254-122.central.biz.rr.com] has left #ubuntu [] === J-_ [n=justin@unaffiliated/j/x-388422] has joined #ubuntu [11:18] XanKriegor: this pretend language ;) [11:18] pricechild: when i load bt2 it says specify root= so i tried root=/ and now it says unknown device string but when i look at the ubuntu entry there is no root specified there >_< confused [11:18] Xera: you could make install | tee install_dump.txt and then while read; rm -f or such === albertico [n=x@70.Red-83-32-28.dynamicIP.rima-tde.net] has joined #ubuntu [11:18] tachchen zusammen [11:18] hi [11:18] !de [11:18] Deutschsprachige Hilfe fuer Probleme mit Ubuntu, Kubuntu und Edubuntu finden Sie in den Kanaelen #ubuntu-de, #kubuntu-de, #xubuntu-de und #edubuntu-de [11:18] justin535431321: so you have 2 separate hard drives, does xp boot ok in the other 1? [11:18] bascule: ok [11:18] i have 250 file for in my /etc/shaper for each of my netowrk user, I have to change my eth0 to eth1, Can i do this by any single commad?? my files sample is here http://paste.ubuntu-nl.org/36492/ [11:18] I have a packard bell easynote and when I close gnome session many times it get frozen, is it a know bug? doesnt happen all times, and it happen with xserver and xgl xserver, both [11:18] yeah i do, it doesn't have XP installed on it, it's abunch of stuff backed up on it === rk013 [n=rk013@90-227-252-233-no28.tbcn.telia.com] has joined #ubuntu === SOja [n=soja@87.244.199.114] has joined #ubuntu === elaiel [n=michael@p54A77E2F.dip.t-dialin.net] has left #ubuntu [] [11:19] XP? What's that? [11:19] sarthor: find , xargs and sed are your friends === echo4mic_IRC [n=john@c-71-229-208-210.hsd1.co.comcast.net] has left #ubuntu ["Ex-Chat"] [11:19] Any ideas on my domain membership dropping off after a reboot? [11:19] hello === |muelli| is now known as Muelli [11:19] )) ? [11:19] sup === ribena [n=ribena@88.144.57.243] has joined #ubuntu [11:19] amias, I am new, could not get that what you said, Please detail a bit. === RebateFX [i=jafar@237.22.98-84.rev.gaoland.net] has joined #ubuntu === Qwenty [n=Kahlney@187.Red-83-32-179.dynamicIP.rima-tde.net] has joined #ubuntu === blaster [n=blasterm@adsl-64-237-221-188.prtc.net] has joined #ubuntu [11:20] !ru | XanKriegor === br24 [n=bribri12@ip68-231-131-152.tc.ph.cox.net] has joined #ubuntu [11:20] XanKriegor: #ubuntu-ru / Pozhalujsta vojdite v #ubuntu-ru dlq pomoshchi na russkom qzyke === dmb [n=dmb@unaffiliated/dmb] has joined #ubuntu === br24 [n=bribri12@ip68-231-131-152.tc.ph.cox.net] has left #ubuntu [] [11:20] russian? === francois_fon [n=francois@sev93-4-82-242-17-76.fbx.proxad.net] has joined #ubuntu [11:20] huh [11:20] Xera: xargs is another way but I don't know the details and running such a thing as root to get perms for /usr/ is scary :) [11:20] someone to talk? [11:20] I can talk [11:20] Hello. === DrBanzai [n=DrBanzai@h216-170-017-249.adsl.navix.net] has left #ubuntu ["Leaving"] [11:20] ^^ [11:20] than say something [11:20] Something [11:20] I like cake? [11:21] i am new in irc === Asuka321 [n=Asuka@user-24-214-48-43.knology.net] has joined #ubuntu [11:21] Lol kk [11:21] Okies.. [11:21] adnan_, no specify root as a partition [11:21] where are you from? [11:21] Sweden [11:21] you? [11:21] grEAT [11:21] pricechild : i did that [11:21] #ubuntu-offtopic for regular chat. [11:21] Slovakia [11:21] adnan_, :\ [11:21] oh kk [11:21] ill join that [11:21] I have a packard bell easynote and when I close gnome session many times it get frozen, is it a know bug? doesnt happen all times, and it happen with xserver and xgl xserver, both === rk013 [n=rk013@90-227-252-233-no28.tbcn.telia.com] has left #ubuntu [] === Thulanis [n=jonathan@host86-153-2-251.range86-153.btcentralplus.com] has joined #ubuntu [11:22] [11:22] pricechild i have root (hd0,2) [11:22] I've gone into xorg using 'Sudo nano /ect/x11/xorg.conf' now what do I have to do in order to get ubuntu to allow me to have 1440x900 resolution? [11:22] What card do you have?? [11:22] pricechild: do i also need to add root:\ [11:22] gnuskool_ on Step 7 out of 7 on the install if you hit advanced options it says Boot Loader: Device for Boot Loader installation: hd0 [11:22] SOja, Hi )) [11:22] GForce4 [11:22] hi === tarvid_ [n=tarvid@dpc6935139037.direcpc.com] has joined #ubuntu [11:22] okies.. [11:22] you now me? === _ropak_ [n=_ropak_@88.83.244.242] has joined #ubuntu === rghering [n=rghering@billing.plains.net] has joined #ubuntu === devo [n=chatzill@pool-71-170-241-80.dllstx.fios.verizon.net] has joined #ubuntu [11:23] anyone know why apparmor would work right after installing, but not after a reboot [11:23] have you gone to the nvidia website and downloaded the proprietary drivers for the card? === dmb [n=dmb@unaffiliated/dmb] has joined #ubuntu [11:23] SOja, Hi ) now me? [11:23] no [11:23] adnan_, wait a minute... pm me what you've added to menu.lst please [11:23] is there an openoffice.org or abiword channel? === xfiles_ken [n=ken-fire@58.50.1.19] has joined #ubuntu === sc0tt_ [n=sc0tt@cpc1-stok5-0-0-cust150.bagu.cable.ntl.com] has joined #ubuntu === diafic_ [n=Greyscal@host86-145-24-126.range86-145.btcentralplus.com] has joined #ubuntu [11:23] pricechild ok [11:24] I recommend you go and download that driver. [11:24] !nvidia | Asuka321 [11:24] Asuka321: To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto === neosix [n=neosix@212.200.100.200] has joined #ubuntu === blaster [n=blasterm@adsl-64-237-221-188.prtc.net] has left #ubuntu ["Ex-Chat"] [11:24] thanks, ubotu... i was looking for that :P === JoshJ [n=JoshJ@r38h107.res.gatech.edu] has joined #ubuntu === maelcum [n=horst@ti100710a080-6877.bb.online.no] has joined #ubuntu [11:25] alright, after that then what? [11:25] it should allow you to change your screen res directly in Gnome === vlug [n=irc@147.80-202-51.nextgentel.com] has joined #ubuntu [11:25] it will populate the list with supported modes. === n00dl3 [n=ctrlx@c-66-176-40-185.hsd1.fl.comcast.net] has joined #ubuntu [11:25] I have a packard bell easynote and when I close gnome session many times it get frozen, is it a know bug? doesnt happen all times, and it happen with xserver and xgl xserver, both === Kill__X [i=kill_x@p5B165609.dip.t-dialin.net] has joined #ubuntu === neosix [n=neosix@212.200.100.200] has left #ubuntu ["Kopete] [11:26] alright [11:26] !apparmor [11:26] Sorry, I don't know anything about apparmor - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [11:26] pricechild: pmmed you dude === yharrow [i=aname_@c-76-108-239-171.hsd1.fl.comcast.net] has joined #ubuntu === G3R [n=germanp@53-148-235-201.fibertel.com.ar] has joined #ubuntu === emiri [n=edu@33.190.101-84.rev.gaoland.net] has joined #ubuntu === bronson [n=bronson@adsl-76-202-198-213.dsl.pltn13.sbcglobal.net] has joined #ubuntu [11:26] all the easynotes my company have are runninf fine with fiesty and LTS [11:26] feisty rather. === ZmaX [n=giuseppe@151.82.3.135] has joined #ubuntu === Kilroo [n=Kilroo@cpe-071-076-173-175.triad.res.rr.com] has joined #ubuntu [11:27] so, when i get into Xorg with sudo [11:27] i type the command lspci | grep -i nvidia [11:27] kris, Yes, works OK, but when I close gnome session, some times, it gets frozen [11:27] and that should do it? === ltar [n=chuck@res248122.resnet.wsu.edu] has joined #ubuntu [11:27] SOja, [11:27] kris, or switching user === khatahn [n=khatahn@MDCXC.voas.saunalahti.fi] has joined #ubuntu [11:27] So, I'm having some problems with Java on Feisty. I have sun-java5-bin which is what my CS course requires me to use for java; but I want to use eclipse. The problem is, eclipse depends on the gnu java libgcj (4.1.2-0ubuntu5) and brings that in. Well, that's fine, I can set Eclipse to use sun java 5 in the settings, but I need the command line java and javac to be using sun java as well. How do I do that? [11:28] kraut, Not reset or shuwdown, only changing user or closing sessiond, and not allways :/ [11:28] how can I list all the HDD's in my computer, in order to determine which is HDa, HDb, etc? [11:28] ltar: ls /dev | grep hda [11:28] it should you, Askuka321 === Zodiac [n=Zodiac@217.116.239.142] has joined #ubuntu [11:28] do** === blaster [n=blasterm@adsl-64-237-221-188.prtc.net] has joined #ubuntu === HelplessSEAL [n=johnny@adsl-67-116-240-100.dsl.pltn13.pacbell.net] has joined #ubuntu [11:28] JoshJ: You have to set sun's java as the first java to look for. [11:28] also, how can I not have to remount my several HDD's each time I boot? [11:28] now, if I am booting off the cd, will this still work? === justin535431321 [n=ubuntu@166-82-11-10.quickclick.ctc.net] has left #ubuntu [] [11:28] Xyhthyx: and how do i do that? === atdejong [n=atdejong@141.218.108.213] has joined #ubuntu [11:29] ltar: though you would have to look at the ones returned in order to see which ones are correct... as far as mounting, you need to use the fstab.. there's probably an article on the ubuntu wiki about fstab [11:29] JoshJ: I forgot ;p but it's in ubuntuguide.org somewhere. [11:29] !fstab === D_ReaL_PuNiShEr [n=flowman4@41.219.237.183] has joined #ubuntu [11:29] The /etc/fstab file indicates how drive partitions are to be used or otherwise integrated into the file system. See http://www.tuxfiles.org/linuxhelp/fstab.html and !Partitions [11:29] good point, how DO you do that === At0mic_P1 [n=arch_ato@host-216-77-192-3.jan.bellsouth.net] has joined #ubuntu === bruenig [n=bruenig@ip-129-15-131-246.fescfwsm.ou.edu] has joined #ubuntu === n00dl3 [n=ctrlx@c-66-176-40-185.hsd1.fl.comcast.net] has joined #ubuntu [11:29] heya, does anyone know why I get this message: (emerald:23055): Wnck-WARNING **: Unhandled action type (nil) [11:29] JoshJ: I know it involves adjusting the java entries in a /etc file. [11:29] justin535431321: check this out http://users.bigpond.net.au/hermanzone/p15.htm#Re-install_Grub_with_Live_CD [11:29] fun :/ [11:29] !effects | Zodiac [11:29] Zodiac: For help or discussion on Beryl or Compiz desktop effects, please go to #ubuntu-effects [11:29] thx [11:29] !java [11:29] To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository. Enable the backports repository on Edgy to install sun-java6-jre [11:29] it will execute the first java in $PATH it finds === sandrinux [n=sandrinu@151.43.210.22] has joined #ubuntu [11:29] Is there any way to have 3d hardware acceleration on vmware? [11:30] thanks bascule === speroni [n=speroni@cpe-24-24-83-99.stny.res.rr.com] has joined #ubuntu [11:30] np [11:30] Thanks bascule, that worked. [11:30] Its a goddamn nightmare to get Beryl working on ATI :P I just gave up and decided to work for a living :P [11:30] also, there is another thing, will I be able to get xchat with just booting off the cd? because when I tried yesterday, it said the package couldnt be found [11:30] JoshJ: do you kno where to change it or how? [11:30] hmm === mystic_pinguin [n=opensour@85.139.140.100] has joined #ubuntu [11:30] Asuka321, use gaim [11:30] you should be able to.. === youknowme [n=tom@69-29-243-28.dyn.centurytel.net] has joined #ubuntu === elkbuntu [n=melissa@ubuntu/member/elkbuntu] has joined #ubuntu [11:30] this is xp running vmware with ubuntu mounted [11:30] ive got a question about java.. i installed the package from Sun, installed it like it told me to, word for word, and when i was done it said it was successfully installed, but it still wont work [11:30] otherwise, do what he said. [11:30] Xera: welcome [11:31] i can access xchat with gaim? [11:31] or rather, this channel? [11:31] Asuka321: gaim lets you access irc [11:31] yeah [11:31] how can i connect ti remote desktop 1. without warning for user 2. without session [11:31] /command === freerise [i=1000@dialup-4.238.221.252.Dial1.Philadelphia1.Level3.net] has joined #ubuntu [11:31] you just make an irc "account" [11:31] atdejong, why didn't you use the package in the repository? [11:31] did you install the dependancies in synaptic? [11:31] help [11:31] which is kinda faking it but yeah [11:31] it does it automatically. [11:31] i am using pidgin right now, its nice === aJoshw [n=ubuntu@ip68-1-124-5.pn.at.cox.net] has joined #Ubuntu [11:31] bascule: possibly, i'm going to look it up on ubuntuguides.org... [11:31] alright, thanks === sanguinarius [n=sanguina@AMontsouris-152-1-55-44.w83-202.abo.wanadoo.fr] has joined #ubuntu === __ [n=user@208.77.235.2] has joined #ubuntu [11:31] how can i connect oi remote desktop 1. without warning for user 2. without session [11:31] kk Askua === Converso [n=julio@9.Red-81-34-152.dynamicIP.rima-tde.net] has joined #ubuntu === freerise [i=1000@dialup-4.238.221.252.Dial1.Philadelphia1.Level3.net] has left #ubuntu [] === derekj212 [n=derekj21@24-180-2-105.dhcp.snlo.ca.charter.com] has joined #ubuntu === Kopfgeldjaeger [n=nicolai@p54AD554F.dip.t-dialin.net] has joined #ubuntu === Converso [n=julio@9.Red-81-34-152.dynamicIP.rima-tde.net] has left #ubuntu ["Un] [11:31] ..a.nd it's not there [11:32] bruenig: i didnt see one in the add remove === PP188 [n=pedro@201-42-167-71.dsl.telesp.net.br] has joined #ubuntu [11:32] bah. bascule you know how to change the paths? === __ is now known as attent === zAo^AfK [n=ask@ip565eef79.direct-adsl.nl] has joined #ubuntu [11:32] I'm having trouble installing Ubuntu 64 Feisty. Am I in the right place? === didymo [n=ashley@CPE-61-9-197-223.static.nsw.bigpond.net.au] has joined #ubuntu === bruenig notes another reason why add/remove screws people [11:32] is the latest adobe flash beta version available as a ubuntu package somewhere? [11:32] bruenig: should i use the apt get method? [11:32] arg. I can right-click the drive and click "mount", but nothing happens. it makes me angry that that's broken. so many things are broken. [11:32] atdejong: you should always use apt-get or synaptic [11:32] is this the right place for trying for figure out desktop effects with an ATI X1600Pro? === Robbster [n=james@dsl-241-11-182.telkomadsl.co.za] has left #ubuntu [] [11:32] [/whine] [11:32] add/remove is really for noobs who have ZERO clue what they're doing :( [11:32] set the sun java dir first in $PATH in /etc/profile or ~/.bash_profile [11:32] atdejong, sorry that ubuntu has 5 different package management schemes, I understand that is confusing, but yes you can get it via apt-get with sun-java6-jre, or you can locate it in synaptic under that same name [11:33] JoshJ: or for people who don't know the exact package name for apt-get [11:33] JoshJ: type 'update-java-alternatives' and pick sun's java. [11:33] atdejong, make sure you remove the other one first [11:33] apt-get or synaptic do it better than addremove anyway...they should swap it over. [11:33] ltar: that's what apt-cache search and the synaptic thing are for [11:33] I need Radmin or DameWare analog for ubuntu. ViNO is bad for me [11:33] Xyhthyx: awesome, that looks like the best way to do it [11:33] bruenig: i;ll just use the apt-get, that hasnt failed me yet [11:33] Xyhthyx: never knew that one .. thanks [11:33] Radmin [11:33] actually works in wine. [11:33] stupid add/remove confusing people [11:33] JoshJ: oh. I had forgoten about apt-cache-search [11:33] but it sucks a lot. [11:34] ltar: grep is quite possibly my favorite command [11:34] if you do a sudo apt-get install vncserver [11:34] so apt-cache search foo | grep bar [11:34] is awesome :D [11:34] sed > awk [11:34] kris, For managment ubuntu woarkstation ? [11:34] sed > grep === SOja [n=soja@87.244.199.114] has left #ubuntu ["Leaving"] [11:34] bruenig: not for simple stuff === Neoxygen [n=neoxy@84-74-175-159.dclient.hispeed.ch] has joined #ubuntu [11:34] JoshJ: You mean apt-cache search foo | grep foo :P [11:34] dpkg -S /some/file is cool and useful too [11:34] Xyhthyx: uh... why would you do that? [11:34] kris, i support users and i need see its screens === thatsPipe [n=rshaw@pool-151-203-73-73.bos.east.verizon.net] has joined #ubuntu [11:34] ok... [11:35] in any case... my single partition 80 gb ext3 hard drive is still unmounted... /dev grep | hda returns four hda === dandel [n=dandel@68-116-249-15.dhcp.dntn.tx.charter.com] has joined #ubuntu === WhiteGulls [n=pan@pool-71-111-138-26.ptldor.dsl-w.verizon.net] has joined #ubuntu [11:35] 1 2 3 and 4 [11:35] JoshJ: Well if you search foo and grep bar, you'll never find bar. === toxix [n=JustIn@78-62-6-183.ip.zebra.lt] has joined #ubuntu [11:35] An nevermind ;p [11:35] can anyone help me get xgl or compiz running? [11:35] Can anyone help me install Ubuntu 64 Feisty? I've been getting an error when it tries to install the kernel. [11:35] and yeah, that update-java-alternatives is awesome [11:35] thanks === tvgm2 [n=Miranda@c-68-55-61-145.hsd1.md.comcast.net] has joined #ubuntu [11:35] np [11:35] is there some way I can list my hard drives... with a clue as to which is which? [11:35] I have several [11:35] kris, I install tightvnc but Xtightvncserver print error === Grungebunny [n=evil@24-171-65-231.dhcp.mtvr.il.charter.com] has joined #ubuntu === clever [n=clever@fctnnbsc16w-156034219024.nb.aliant.net] has joined #ubuntu [11:35] aJoshw: you have a 64bit cpu? ;p [11:35] editing the PATH is better than alternatives in my book [11:36] ltar: places- computer works [11:36] ltar: cfdisk is pretty good [11:36] ah.. [11:36] is there a list of programs that are installable using apt-get? [11:36] fdisk -l [11:36] how would i recover the partition table after its been whiped by shity XP? [11:36] bruenig: when i loaded the /etc file, there wasn't even a path in it === ni1s [n=ni1s@1-1-4-36a.dre.sth.bostream.se] has joined #ubuntu [11:36] ive found the start of the partition === snocone [n=Anon@216-67-26-203-cdsl-rb2.cwc.acsalaska.net] has joined #ubuntu [11:36] atdejong: yes === SyntraX [n=syntrax@82.119.88.252] has joined #ubuntu [11:36] UrbenLegend: http://pastebin.com/m7e18dc58 [11:36] atdejong: Sure, just launch Synaptic and check them all out. [11:36] atdejong: packages.ubuntu.com is probably the easiest way to do it [11:36] PATH is a variable in /etc/profile [11:36] hmm.. [11:36] JoshJ: but I can't mount from places computer, I need to know the HDX designation for the HDD in question. it's nowhere to be found in nautilus [11:36] since you may not have all the repositories enabled [11:36] aJoshw: will this be a general desktop machine? it may be that 64 bit is more trouble than it is worth to you at this point. [11:37] I have a packard bell easynote and when I close gnome session many times it get frozen, is it a know bug? doesnt happen all times, and it happen with xserver and xgl xserver, both [11:37] ltar: in that case why not just do ls /dev | grep hda [11:37] === alcalde84 [n=fernando@cablelink16-78.telefonia.intercable.net] has joined #ubuntu === FunnyLookinHat [n=funnyloo@64.140.73.93] has joined #ubuntu === TwinX [n=TwinX@178-044-128-083.dynamic.caiway.nl] has joined #ubuntu === mchineboy [n=tyler@208-106-23-220.dsl.static.sonic.net] has joined #ubuntu === SyntraX is now known as desertrose_ === lizard_ [n=lizard@host-84-9-199-37.bulldogdsl.com] has joined #ubuntu [11:37] ltar: then do ls on each of those to see which is which [11:37] anyone her who get Compiz Fusion with an GF8600GT running? [11:37] JoshJ, you can replicate what grep does with sed for the most part without much more difficulty and the vast other things it can do [11:37] @snocone: yeah everything seems to be working fine [11:37] it's probably not the "cleanest" way to do it but it'll work *shrug* [11:37] i have no idea without researching, of anything that could help [11:37] @snocone excpet the fact you can't connect [11:37] Rosiel: id /join #ubuntu-effects and ask there as well [11:37] @snocone what does it do when you try to connect? === TheZanke [n=thezanke@74-132-182-250.dhcp.insightbb.com] has joined #ubuntu === WhiteStar [n=tim@s205-206-61-54.ab.hsia.telus.net] has joined #ubuntu [11:38] UrbenLegend: nothing. === mchineboy [n=tyler@208-106-23-220.dsl.static.sonic.net] has left #ubuntu [] [11:38] http://pastebin.ca/682954 are those dependencies needed in a "secure system" or functional safe system? [11:38] UrbenLegend: what does roaming mean? [11:38] kris, error - screen 0 already use ... [11:38] not assigning to any specific location [11:38] = roaming === [GuS] [n=gdnet@190.48.120.184] has joined #Ubuntu [11:38] kris, error - display 0 already use ... [11:38] will dhcp when it can [11:38] i have 250 file for in my /etc/shaper for each of my netowrk user, I have to change my eth0 to eth1, Can i do this by any single commad?? my files sample is here http://paste.ubuntu-nl.org/36492/ [11:39] hmm [11:39] habe ein kritisches problem mit ubuntu feisty 7.04 [11:39] vl kann mir hier jemand helfen === gnuskool_ [n=chatzill@82.99.36.199] has left #ubuntu [] [11:39] und zwar geht das updaten nicht mehr [11:39] @snocone: it basically allows you to switch between routers quickly and easily [11:39] !de [11:39] Deutschsprachige Hilfe fuer Probleme mit Ubuntu, Kubuntu und Edubuntu finden Sie in den Kanaelen #ubuntu-de, #kubuntu-de, #xubuntu-de und #edubuntu-de [11:39] oh, sorry [11:39] JoshJ: ls /dev | grep hda lists the 5 partitions on HDA. this must be my 250 gb HDD. so I'll try grep HDB, and find two partitions on... one of my three HDD's. HDC returns nothing. I still have no idea how to mount the hard drive labelled "80 gb old Ubuntu" in nautilus. === poncho [n=poncho@adsl-75-54-64-192.dsl.ksc2mo.sbcglobal.net] has joined #ubuntu [11:39] ltar, sudo fdisk -l would be an easier way to go about that... === nilsjoa [n=nerdiger@i59F716C7.versanet.de] has left #ubuntu [] === nybble [n=nybble@d36-7-248.home1.cgocable.net] has joined #ubuntu === afterlife [n=afterlif@host214-242-dynamic.7-79-r.retail.telecomitalia.it] has joined #ubuntu [11:40] ltar: if it's SATA it will be sda [11:40] Thanks for all the help..... e_e === atdejong [n=atdejong@141.218.108.213] has left #ubuntu [] [11:40] sarthor: something like "sed -i s/eth0/eth1/g *" ?? === Tyle2 [n=tylerkei@dsl-111-119.htc.net] has joined #ubuntu [11:40] Xan, thats odd... === bjuntuz [n=bjuntuz@84-50-135-15-dsl.rkv.estpak.ee] has left #ubuntu [] === _Lucretia_ [n=munkee@5ac2a214.bb.sky.com] has joined #ubuntu === bjwebb [n=bjwebb@ACCA98BA.ipt.aol.com] has joined #ubuntu [11:40] Have a look on the 'buntu wiki [11:40] bruenig: THAT's the command I was looking for! [11:40] thank you === darlek [n=upon@CPE000f3d513fb5-CM0011ae927866.cpe.net.cable.rogers.com] has joined #ubuntu === bruenig celebrates [11:40] snocone: are you using any encryption [11:40] UrbenLegend: so any idea what's wrong? === unagi [n=unagi@016-029-117.area7.spcsdns.net] has joined #ubuntu [11:40] wep === P_Kable [n=P_Kable@ip68-228-32-205.tc.ph.cox.net] has joined #ubuntu [11:41] thank you dyrne , Can you not help in a bit detail? === stefg [n=stefg@e179145158.adsl.alicedsl.de] has joined #ubuntu [11:41] sarthor: try this: perl -pi -e 's/eth0/eth1/g' * [11:41] snocone: does it keep asking you for the password? [11:41] does anyone know how to adjust color on a nVidia ge force 4 restricted driver [11:41] {{AFK}} [11:41] no, it doesn't do anything [11:41] Tyle2: install nvidia-settings === bjames [n=bjames@client-81-109-217-120.leed.adsl.virgin.net] has joined #ubuntu [11:41] snocone: and you have roaming enabled and you are using the network manager applet in your tool bar? === moi_ [n=moi@AToulouse-257-1-104-76.w82-125.abo.wanadoo.fr] has joined #ubuntu [11:41] do i do that off nvidia .com === sandrinux [n=sandrinu@151.43.210.22] has left #ubuntu ["Sto] === moi_ is now known as jp [11:42] hi all === mchineboy [n=tyler@208-106-23-220.dsl.static.sonic.net] has joined #ubuntu [11:42] Tyle2: no, with the package manager, it's part of ubuntu [11:42] is there any one-click translators for linux? like babylon ? [11:42] UrbenLegend: I don't have roaming enabled now, no. and yes [11:42] \afk [11:42] o ok [11:42] snocone: also bcm43xx can only do 11 mbps so if your router is set to 54 mbps only === root___ [n=chatzill@bdv75-2-81-57-250-95.fbx.proxad.net] has joined #ubuntu === fredddy [n=freddy@p3E9E2398.dip0.t-ipconnect.de] has joined #ubuntu === Kilroo [n=Kilroo@cpe-071-076-173-175.triad.res.rr.com] has joined #ubuntu [11:42] UrbenLegend: that's fine, if I ever need faster, I'll deal with it then === ionstorm [n=ion@70-58-119-250.phnx.qwest.net] has joined #ubuntu === StoneNote [n=StoneNot@unaffiliated/stonenote] has joined #ubuntu [11:42] snocone well you can't use the network manager applet without roaming enabled [11:42] I quite often do the following: cat > FILE << EOF and I wanted to make this into a BASH script so I can just type makeme FILE and it has the same behaviour - how do I do it? [11:42] UrbenLegend: Are you sure about that? Is it restricted to b only? Or is it just your model [11:43] sartor: actually you can do it with just sed - sed -i 's/eth0/eth1/' /etc/shaper/* === nybble [n=nybble@d36-7-248.home1.cgocable.net] has joined #ubuntu [11:43] I've tried: exec cat > $1 << EOF [11:43] squee: the tx power for bcm43xx driver is not powerful enough so its sutck at 11 mbps [11:43] but it doesn't work [11:43] bjames, I did this with read before [11:43] bjames, you aware of read? [11:43] UrbenLegend: alright [11:43] squee: says so on the website [11:43] yes === ChildX [n=ChildX@dsl153-251.lj1.volja.net] has joined #ubuntu [11:43] UrbenLegend: lemme go fiddle. I may get it right [11:43] does somebody here uses ddclient behind a router, by chance ? [11:43] I'll try it [11:43] hello [11:43] cheers [11:44] UrbenLegend: I dont use any broadcom chipset card so i've never heard that [11:44] bjames: see the useless uses of cat website === Thegeektechnique [n=geek@ip70-178-247-42.ks.ks.cox.net] has left #ubuntu [] [11:44] Gnea, Thank you very very Much.. I love you brother, you solved my problem. thank you agani [11:44] bjames, yeah so just have it echo ">" if you want it to look just like the cat thing, and then have it read each line and then test whether the line says EOF or not, if it doesn't, then append it to FILE, if it does, then exit [11:44] how can i install java on Ubuntu 7.04 i386 desktop version? [11:44] P_Kable, do you mean dhclient ? [11:44] bjames, have to do a loop obviously [11:44] amias: that command is nowhere cryptic enough. you should have put it in a perl script [11:44] ddclient amias ddclient [11:45] dyndns wan IP update client === nomin [n=nomin@unaffiliated/nomin] has joined #ubuntu === Surlent [n=surlent@67-128-15-242.dia.static.qwest.net] has joined #ubuntu === iskaldur [n=edchen@EASTCAMPUS-SEVEN-EIGHTY-FIVE.MIT.EDU] has joined #ubuntu [11:45] dyrne: i know , sometimes i worry that unix is getting to user friendly ;) [11:45] please tell me the command to install the latest java for Ubuntu 7.04 i386 desktop version === stefano_ [n=stefano@190.80.221.229] has joined #ubuntu === Coole^ [n=justin@71-212-52-231.tukw.qwest.net] has joined #ubuntu [11:45] !java | ChildX [11:45] ChildX: To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository. Enable the backports repository on Edgy to install sun-java6-jre [11:45] how can i figure out if a graphics card is compatible with my computer? (i have a dell vostro 200 slim tower, and i want to get a nvidia geforce 6200 so i can run compiz :)) [11:46] Alright, is there anyone here who is highly skilled at partitioning that wouldn't mind a PM conversation? [11:46] ChildX, runtime or sdk ? === boojah [n=boojah@ti231110a080-9123.bb.online.no] has joined #ubuntu [11:46] !pm [11:46] Please ask your questions in the channel so that other people can also benefit AND help you. Please don't PM a user in the channel without asking first, some find it rude. [11:46] runtime === hamburglar01 [n=frank@24-247-151-171.dhcp.klmz.mi.charter.com] has joined #ubuntu [11:46] i need java runtime environment === Sonderblade [n=fsldfj@host-n81-189.homerun.telia.com] has joined #ubuntu === vip3rousmango [n=Vip3rous@70.54.237.114] has joined #ubuntu === hamburglar01 [n=frank@24-247-151-171.dhcp.klmz.mi.charter.com] has left #ubuntu [] [11:46] !info sun-java6-jre [11:46] sun-java6-jre: Sun Java(TM) Runtime Environment (JRE) 6 (architecture independent files). In component multiverse, is optional. Version 6-00-2ubuntu2 (feisty), package size 6176 kB, installed size 14148 kB [11:46] what is the shorthand for stdin? === J_Manuel [n=_______@17.Red-88-19-13.staticIP.rima-tde.net] has joined #ubuntu [11:46] apt-get install ?? === hamburglar01 [n=frank@24-247-151-171.dhcp.klmz.mi.charter.com] has joined #ubuntu === craio [n=michiel@d54C59912.access.telenet.be] has joined #ubuntu === craio [n=michiel@d54C59912.access.telenet.be] has left #ubuntu ["Ex-Chat"] [11:47] bjames, what do you mean === ilu [n=ilu@84-73-84-190.dclient.hispeed.ch] has joined #ubuntu [11:47] what's the package name of the latest java runtime environment for ubuntu 7.04? [11:47] !info sun-java6-jre [11:47] sun-java6-jre: Sun Java(TM) Runtime Environment (JRE) 6 (architecture independent files). In component multiverse, is optional. Version 6-00-2ubuntu2 (feisty), package size 6176 kB, installed size 14148 kB [11:47] ChildX: eventually , do 'apt-cache search java | grep runtime ' to see a list ofsuitable packages === Almighty_Henaro [n=a_hen@c-24-98-20-28.hsd1.ga.comcast.net] has joined #ubuntu [11:47] listen to ubotu, he is all knowing === TuPari [n=jks@temporary.selectacast.net] has joined #ubuntu [11:47] as i understand === vip3rousmango [n=Vip3rous@70.54.237.114] has left #ubuntu ["uh.."] [11:48] echo "something" >&1 === malakhi [n=malakhi@66.37.82.177] has joined #ubuntu [11:48] apt-get install sun-java6-jre [11:48] ?? [11:48] echo to stdout [11:48] hey gena nvidia settings is not there [11:48] ChildX: sudo apt-get install sun-java6-plugin [11:48] bjames: usually - === nike^^ [i=nike__@host36-143-dynamic.12-87-r.retail.telecomitalia.it] has left #ubuntu [] [11:48] aha [11:48] thanks [11:48] bjames, why would you need that? [11:48] Help! I just install 6.06 lts and now when my server boots it just displays GRUB and freezes [11:48] I have a packard bell easynote and when I close gnome session many times it get frozen, is it a know bug? doesnt happen all times, and it happen with xserver and xgl xserver, both [11:48] does anyone know much about wifi on ubuntu? === Grey_ [n=Greyscal@host86-145-24-126.range86-145.btcentralplus.com] has joined #ubuntu === havalan [n=havalan@84-73-84-190.dclient.hispeed.ch] has joined #ubuntu [11:48] while read line [11:48] do [11:48] echo $line [11:48] done < &1 [11:48] ?? === poncho [n=poncho@adsl-75-54-64-192.dsl.ksc2mo.sbcglobal.net] has joined #ubuntu === tehgooch [n=tehgooch@d216-232-191-166.bchsia.telus.net] has joined #ubuntu [11:48] on java.com there's java 7 [11:49] 1 is std out 2 is standard err [11:49] not for linux? [11:49] how do i extend my desktop onto the second monitor === LordVoldemort [n=ubuntu@88.244.4.245] has joined #ubuntu [11:49] ??? === gerath [n=gee@c-71-199-255-189.hsd1.fl.comcast.net] has joined #ubuntu [11:49] ChakRa, there is no Java 7 [11:50] the java verision that you should use is the one available on the repositories === curro [n=curro@82.198.106.67] has joined #ubuntu [11:50] !xinerama | lizard_ [11:50] lizard_: xinerama is an extension to !X to use two or more physical displays as one large virtual display. See https://help.ubuntu.com/community/XineramaHowTo - See also !DualHead === hamburglar01 [n=frank@24-247-151-171.dhcp.klmz.mi.charter.com] has left #ubuntu [] [11:50] i just set up ssh here.. i created keys and such, and opened port 22 for my box on the router. i only have this box here.. so i can't check how the remote connection will go. but if i try to use putty on this box i can't use my dyndns address (connection refused) but localhost workes. is this because im trying to go back trough my own interface? [11:50] i am having trouble getting the wifi on my ubuntu to work === nandemonai [n=nandemon@ppp121-45-120-131.lns11.adl6.internode.on.net] has joined #ubuntu [11:50] albertico, sounds like a bug to me , you could try setting up the framebuffer to use the same resolution as X to prevent mode changes that might be tripping the bug [11:50] which ubuntu package contains the file parskip.py? [11:50] parskip.sty i mean [11:50] Hey anyone know how to setup limewire for ubuntu === ironfroggy [n=calvinsp@166-82-148-62.quickclick.ctc.net] has joined #ubuntu === malakhi [n=malakhi@66.37.82.177] has joined #ubuntu [11:51] Sonderblade, dpkg -S parskip.sty [11:51] boojah: you must test it from outside [11:51] gerath whats the problem? [11:51] sun-java7-plugin ?? [11:51] boojah: you have installed openssh-server? [11:51] I've got a printer setup via cups, but its not started and i cant find any command to start the printer. anyone know what i need? [11:51] amias: thanks [11:51] stefg: no only sshd === Asuka4321 [n=ubuntu@user-24-214-48-43.knology.net] has joined #ubuntu === Kworth [n=Kworth@dslb-088-065-105-034.pools.arcor-ip.net] has joined #ubuntu [11:51] bjames, http://pastebin.ca/682976 [11:52] boojah: sudo apt-get install openssh-server [11:52] I tried to installed from the Limwire site but in intalled but when i load it just hangs there. dose nothing [11:52] does anyone know how to adjust the nvidia color settings on a ge force 4 (nvidia settings is not in package manager [11:52] files in /etc/cron.hourly are excecuted by root hourly , right? === jumbers__ [n=john@ool-457dc6cb.dyn.optonline.net] has joined #ubuntu [11:52] ChildX, java7 is a development version, the standard current version is java6 === kapo [n=kapo@217.54.64.2] has joined #ubuntu [11:52] Bojan 2.0 [11:52] gerath: did u download the .deb file? [11:52] ironfroggy, try sudo /etc/init.d/cupsys restart [11:52] boojah: just connected to your ip address, port 22. looks good: "SSH-2.0-OpenSSH_4.3p2 Debian-8ubuntu1" [11:52] stefg: do i need it? wont the regular ssh daemon work just fine? === Kopfgeldjaeger [n=nicolai@p54AD554F.dip.t-dialin.net] has joined #ubuntu === snocone [n=Anon@216-67-26-203-cdsl-rb2.cwc.acsalaska.net] has joined #ubuntu [11:52] boojah: you need it [11:53] yes i donwnload the deb file [11:53] gerath: try other systems where it says OS/2 Solaris linux [11:53] i have /etc/init.d/cupsys and /etc/init.d/cups [11:53] bjames, have not tested that, but it is at least theoretically close [11:53] stefg: /etc/cron.hourly is excecuted by root , isn't it? [11:53] UrbenLegend: ok, I'm connected to the network. but still no internet. where do I go from here? [11:53] what are each of them for? [11:53] do you have Bojan 2.0 installed? [11:53] stefg and POVaddci ok thanks alot === alcalde84 [n=fernando@cablelink16-78.telefonia.intercable.net] has left #ubuntu [] [11:53] Ok thank will do === bjwebb [n=bjwebb@ACCA98BA.ipt.aol.com] has left #ubuntu ["Konversation] === alcalde84 [n=fernando@cablelink16-78.telefonia.intercable.net] has joined #ubuntu [11:53] gerath: oh wait === bbloog2 [n=piespy@athedsl-286864.home.otenet.gr] has joined #ubuntu [11:53] no === Carnage` [n=carnage@Xa55f.x.pppool.de] has joined #ubuntu [11:53] ive restarted cupsys but the printer is stilled Stopped [11:54] stefg and POVaddci hmm seems i already had openssh [11:54] ironfroggy, install Bojan 2.0 === hugifrb [n=martin@p549FF86F.dip.t-dialin.net] has joined #ubuntu === Java4Ever [n=Vierchas@89.100.63.155] has joined #ubuntu [11:54] ChildX: /etc/cron.hourly is excecuted by root , isn't it? [11:54] im sorry i didnt know you were talking to me [11:54] alright, i'm still not getting how to change my resolution to 1440x900 === gerath [n=gee@c-71-199-255-189.hsd1.fl.comcast.net] has left #ubuntu [] [11:54] Kworth, the things in cron.hourly are yes [11:54] Kworth, what? [11:54] bruenig, thanks [11:54] wow. I still use 800x600 === brmassa [n=brmassa@201-42-189-35.dsl.telesp.net.br] has joined #ubuntu [11:54] guys, i installed windows after kubuntu on a fat32 partition. now i want to access the partition its saying: "hal-storage-fixed-mount refused uid 1000" [11:54] i tried to start through the web admin, but it asks for a password and i have no idea what it is. i never had a place to configure one when i installed cups. === biosword [n=biosword@host63-102-dynamic.6-87-r.retail.telecomitalia.it] has joined #ubuntu [11:54] ChildX, bruening already answered me , but thanks [11:55] Kworth, you can do a user crontab though, with crontab -e [11:55] im in the sudo xorg, and i typed Ispci | grep -i nvidia, but it didn't do anything [11:55] it still doesn't work, someone tell me how to install nvidia binary files if all i have is Ubuntu live cd === JoshJ [n=JoshJ@r38h107.res.gatech.edu] has left #ubuntu ["Leaving"] [11:55] snocone: you're connected but no internet? === kagliostro [n=luca@82-46-172-245.cable.ubr01.king.blueyonder.co.uk] has joined #ubuntu [11:55] bruenig, yeah but i want a backup task so I need root [11:55] yeah === alcalde84 [n=fernando@cablelink16-78.telefonia.intercable.net] has left #ubuntu [] === freerise [i=1000@dialup-4.238.222.240.Dial1.Philadelphia1.Level3.net] has joined #ubuntu [11:55] @snocone can you access your router? [11:55] i'm a noob on linux :D [11:55] i see so many people have problems with ubuntu [11:55] yes === Tyle2 [n=tylerkei@dsl-111-119.htc.net] has left #ubuntu [] [11:55] brmassa: #kubuntu [11:55] snocone: as in router configuration page and stuff like that? === no_gatez_fan [n=patrick@cpe-069-132-015-252.carolina.res.rr.com] has joined #ubuntu [11:55] ubuntu is a shit-load of fuck [11:55] :D === delskorch [n=delskorc@d14-69-22-107.try.wideopenwest.com] has joined #ubuntu [11:55] language === gerat1 [n=gee@c-71-199-255-189.hsd1.fl.comcast.net] has joined #ubuntu === havalan [n=havalan@84-73-84-190.dclient.hispeed.ch] has left #ubuntu ["Leaving"] [11:56] Java4Ever, 32 or 64bit [11:56] GNOME reminds me of the old Macintosh... [11:56] ? === gerat1 [n=gee@c-71-199-255-189.hsd1.fl.comcast.net] has left #ubuntu [] [11:56] ChildX: was that good or bad?? :) [11:56] 32 [11:56] what is this bojan? [11:56] stefg. its not a specific to kubuntu. [11:56] !language > ChildX === emPhaZer [n=emp@31.84-48-209.nextgentel.com] has joined #ubuntu [11:56] Can anyone give me a link to a guide on how to use VirtualBox with a pre-existing windows installation? Everything I'm finding for resources shows me how to use virtual box to install a new OS. === SyntraX [n=syntrax@82.119.88.252] has joined #ubuntu [11:56] FUCK YOU ALL !!! [11:56] UrbenLegend: well, I didn't try to configure my router. but I imagine it would work [11:56] I have a widescreen monitor with the best resolution of 1440x900 except currently, none of the default ubuntu settings let me higher that 1280 [11:56] Java4Ever, Just download the files from Nvidia.com and start the programm [11:56] how can I fix this? [11:56] Hey guys how do you change resolution in KDE? [11:56] davidthedrake, I am not sure you can use an installed windows on virtualbox [11:56] Almighty_Henaro, #kubuntu [11:56] unless you create an image from an installtion === deadbody [n=deadbody@cpe-24-58-101-124.twcny.res.rr.com] has joined #ubuntu === At0mic_PC [n=arch_ato@host-216-79-252-59.jan.bellsouth.net] has joined #ubuntu [11:56] UrbenLegend: I had signal bars showing [11:57] Almighty_Henaro: control centre peripherals monitor [11:57] Okay e_e [11:57] snocone: well cuz if you can access your router config but not the internet i'd say something wrong with dns === freerise [i=1000@dialup-4.238.222.240.Dial1.Philadelphia1.Level3.net] has left #ubuntu [] [11:57] kworth the problem is i cant not download when i start ubunt, cause my broadcom card doesnt' work! === michael [n=michael@bas6-kitchener06-1177624499.dsl.bell.ca] has joined #ubuntu === vader1102 [n=vader@bas3-kitchener06-1096649605.dsl.bell.ca] has joined #ubuntu === deadbody [n=deadbody@cpe-24-58-101-124.twcny.res.rr.com] has left #ubuntu ["Ex-Chat"] [11:57] i just enabeld my ati card to restricted drivers and i try to run my desktop effects to run 3d desktop it says the composite extension is not available is that.ptw i have internal card on motherbord [11:57] stefg: im not sure what i gotta do with openssh.. if i have sshd running, port 22 open, and created the keys, shouldn't i be able to access remotely? [11:57] How do I get to control center? [11:57] Lamego, Gotcha. Know of any virtualization software that will allow for the use of pre-existing installations? [11:57] !nvidia [11:57] To install the Ati/NVidia drivers for your video card, see https://help.ubuntu.com/community/BinaryDriverHowto [11:57] snocone: or the route table is not correct === Paddy_EIRE [n=patrick@84.13.126.88] has joined #ubuntu [11:57] Java4Ever, Don't u have an USB Stick? === axen_ [n=axen@xdsl-2682.zgora.dialog.net.pl] has joined #ubuntu [11:57] boojah: actually yes [11:57] yeah , i have [11:57] bulmer: elaborate on this router table. [11:57] where does the cups web admin get the username and passwords it accepts? i dont know how to configure that. [11:58] Almighty_Henaro: off the start menu but #kubuntu is the place [11:58] Is there something like Acronis True Image for Ubuntu, if yes how is it called? [11:58] davidthedrake, I believe vmware does, but even it does it is a complex setup, due to the differences between your real OS and the VM HW, from a device driver configuration perspective [11:58] snocone can you paste into pastebin your result of netstat -ran === Exposure [n=exposure@cc569857-b.ensch1.ov.home.nl] has joined #ubuntu === gce [n=someone@c-24-10-80-26.hsd1.ca.comcast.net] has joined #ubuntu [11:58] snocone: okay that's a good step forward though, at least the driver seems to be working, but def check on next restart if you can access router config. Go to your dns tab and see if its listing your router private ip as a dns server [11:58] ironfroggy, you need a root password, shhh don't tell anyone I told you that, they will kill me [11:58] stefg: but if i try to use the dyndns address (at least from here, the localhost) it seems it tries to access the router [11:58] boojah: try sudo/etc/init.d/ssh restart ... just to make sure [11:59] Is there an tool with wich I can create an Image of an harddisk and restore it lateron, I tried Simple Backup but it doesn't work like its supposed to [11:59] ? === Rosiel [n=angelofn@dslb-084-063-166-249.pools.arcor-ip.net] has joined #ubuntu [11:59] !info partimage | Kworth [11:59] kworth: partimage: backup partitions into a compressed image file. In component universe, is optional. Version 0.6.4-17 (feisty), package size 268 kB, installed size 944 kB [11:59] ubuntu-effects [11:59] Lamego, Alright. Simplicity would be a good thing at this point. I've already had tons of fun just getting Ubuntu to work on my Laptop. Thanks for the info though :) [11:59] ironfroggy: lppasswd [11:59] Kworth: the most definite way id dd if=/dev/hd?? of=dump.img === daver [n=daver@66.15.52.70] has joined #ubuntu === sambiase [n=sambiase@c213-100-19-249.swipnet.se] has joined #ubuntu [12:00] I'm trying to download a driver from nvidia so that I can reach 1440x900 on my graphics card. with Ubuntu 7.04, do I select Lunux x86 or linux x64? [12:00] When I try to boot my newly install system it just says GRUB and freezes [12:00] then to restore it dd if=dump.img of=/dev/hd?? === sebsebseb [n=chatzill@82-46-9-58.cable.ubr05.azte.blueyonder.co.uk] has joined #ubuntu [12:00] stefg: ssh is running, i can access myself if i use the loopback address (duh) but is there anyway to make sure its accessable from the outside [12:00] I think grub can't handle my raid card [12:00] Asuka4321: don't use that === ironfroggy_ [n=calvinsp@166-82-148-62.quickclick.ctc.net] has joined #ubuntu [12:00] !fixres | Asuka4321 [12:00] Asuka4321: The X Window System is the part of your system that's responsible for graphical output. To restart your X, type sudo /etc/init.d/?dm restart in a console - To fix screen resolution or other X problems: http://help.ubuntu.com/community/FixVideoResolutionHowto [12:00] boojah: you cannot test that from inside [12:00] Does anyone know the way to force a gigabit network card to 1000? [12:00] hi there...i wonder if there is a kubuntu small enough to run from a USB stick and still be able to save information... [12:00] ? [12:00] someone offer help why i cant see my harddrive on the live CD - so i cant gpart or install? === gene [n=gene@c-67-167-213-246.hsd1.il.comcast.net] has joined #ubuntu === pvl1 [n=pvl1@71.175.24.250] has joined #ubuntu [12:00] sambase how big is the stick? [12:00] i think windows is much better, everything works perectly, no need to fuck with drivers [12:00] mii-tool only shows till 100base-TxFD [12:01] I carn't enable the Nivida driver in Gutsy. I am on the Feisty live CD at the moment. sudo nvidia-glx-config enable Error: /etc/X11/xorg.conf or /var/lib/x11/xorg.conf.md5sum are missing from your system. [12:01] POVaddci: :( well i guess i just have to wait then [12:01] got disconnected. so, are the creds cups wants for a real user? [12:01] its a SATA drive [12:01] i dont think i need to restart my x [12:01] and if that user is in lpadmin, shouldnt that be enough? [12:01] TuPari: i would like something around 1GB [12:01] Please be sure that your xserver package is installed correctly. I assume I got to add the missing file from some where to my Gutsy install, by mounting it and making it so I can write to it. carn't remember how to do that either [12:01] and where to get the missing file? [12:01] Java4Ever: watch the language please [12:01] swith wo windows guys:) [12:01] mulstisync wont load [12:01] yes you can use the standard ubuntu cdrom [12:01] ubuntu isn't letting me reach 1440x900 for my screen resolution [12:01] switch to windows === tehgooch [n=tehgooch@d216-232-191-166.bchsia.telus.net] has joined #ubuntu [12:01] use syslinux on the usb drive and copy all files from the cdrom [12:01] you have to mess around with drivers a bit in Windows as well, depending on what hardware is being run === kkathman [n=kkathman@pool-71-170-110-185.dllstx.fios.verizon.net] has joined #ubuntu [12:01] Java4Ever: I shouldn't bite but I'm gona, try install X or vista on this laptop from a raw cd, see how far you get, ubuntu picked it all up out-the box [12:01] by the way Java4Ever === axen [n=axen@xdsl-2682.zgora.dialog.net.pl] has joined #ubuntu [12:02] !ot | Java4Ever [12:02] Java4Ever: #ubuntu is the Ubuntu support channel, #ubuntu+1 supports the development version of Ubuntu and #ubuntu-offtopic is for random chatter. Welcome! [12:02] boojah: if your ip address is the one visible in /whois boojah, then your ssh-server is reachable === eyec0n [n=eyec0n@c-67-181-22-41.hsd1.ca.comcast.net] has joined #ubuntu [12:02] TuPari: right... would that work with kubuntu as well? i prefer KDE.... [12:02] It should === usser [n=dmitry@ool-18b8e9e6.dyn.optonline.net] has joined #ubuntu [12:02] boojah: (i just tested it from here) [12:02] Java4Ever: don't go to the DARK SIDE [12:02] TuPari: how big is a final installation of Kubuntu? === axen [n=axen@xdsl-2682.zgora.dialog.net.pl] has left #ubuntu ["Ex-Chat"] === usser come to the dark side luke [12:03] hi sambiase :) === sausage1337 [n=sausagez@60-234-217-170.bitstream.orcon.net.nz] has joined #ubuntu [12:03] dunno, but it fits on a cd, doesn't it? [12:03] sambiase, 2 gigs it the minimum [12:03] sambiase: mine takes up 3 gb === ubuntu [n=ubuntu@cpe-24-175-189-28.stx.res.rr.com] has joined #ubuntu [12:03] is* [12:03] stefano_: mii-tool -F 100baseTx-FD eth0 [12:03] nevermind, i think if i actually install ubuntu, it will let me access 1440x900 once it detects my settings, currently i am running off a live cd [12:03] http://lwn.net/Articles/248227/ [12:03] bout time === Dead2Fall [n=Dickhead@nj-71-53-14-9.dhcp.embarqhsd.net] has joined #ubuntu === richie [n=richie@87.127.77.49] has joined #ubuntu [12:03] hi === richie is now known as RichW === Asuka4321 [n=ubuntu@user-24-214-48-43.knology.net] has left #ubuntu [] [12:03] Asuka4321: yeah that'l help get some config files changed anyway :) [12:03] cheers for the help all - I made my own script in the end ;) [12:03] multisync wont load [12:03] bye [12:03] I have to 2 line for internet, one is Cable modem, and other is ADSL Modem, both of my ips are dynamic, Can i run these both isps from one linux server to share internet to my lan users, if yes then how?? === bjames [n=bjames@client-81-109-217-120.leed.adsl.virgin.net] has left #ubuntu [] [12:04] right...thankssss....gotta try....but the thing is that I dont just want to move the files from the CD to the USB and then not be able to save changes to the USB === flagel [n=flagel@c83-251-224-98.bredband.comhem.se] has left #ubuntu [] === kingKonqueror [n=hat@bas1-windsor12-1088733804.dsl.bell.ca] has joined #ubuntu [12:04] bulmer, but i could go to 1000Mbps... I have the switch and my desktop at Gigabit. [12:04] What does a stopped state of a printer actually mean? [12:04] does anyone know how i can block ad servers by using the hosts and hosts.deny files? === axen [n=axen@xdsl-2682.zgora.dialog.net.pl] has joined #ubuntu [12:04] does that just mean its waiting for things? it also says accepting jobs.