[00:05] Hi all, when I first installed mythweb I could download recordings right off it, now all of a sudden its trying to launch some application... any idea how to fix it? [00:15] I want to make the server do a stream [00:15] your problem is due to an application you set as default, you have to change that in your OS [00:16] I just want to download the .nuv file and save to disk [00:17] any gutsy experts in the place? looking for a way to stop eth0 being reconfigured at boot time. just converted an install to netboot with nfsroot and er, the kernel is panicing at http://www.pastebin.ca/808879 [00:18] MythbuntuGuest14, did you try right clicking and save file as? [00:19] yeah, but no responce...mythweb serves links as myth://192.168.0.202:6543/1063_20071207023000.nuv [01:43] hey tgm [01:46] you use rf remotes....maybe snapstream firefly? [01:49] nope [01:49] sorry [01:57] can anyone help me get windows to detect my htpc on my network? [01:57] Hello everyone === MythbuntuGuest77 is now known as Mikey7047 [02:00] I will post my question in case anyone comes back from idle: I just installed the newest mythbuntu (it's been months I think the last version I had was Edgy) and my picture quality is terrible, where it used to work perfectly fine. I just installed ivtv drivers which I'm not even sure if that was the right thing to do or not and it didn't help and I am at a loss for what to do next. I am using a PVR-150 and Gutsy version [02:01] can anyone help me get windows to detect my htpc on my network? [02:01] MythbuntuGuest16, detect what specifically? [02:02] windows isnt seeing the htpc on the network [02:02] You need to setup samba if you haven't already [02:02] have [02:02] and have set tcp/ip settings in windows [02:03] is there anything particular that has to be done just need to move the files from this comp over to the htpc [02:04] okay, file sharing [02:04] you never actually said that [02:04] install samba, configure a share. i'm not sure how much of that can be done from mythbuntu-control-center [02:04] i have the sharing setup in windows [02:04] i know not many options there [02:05] the folders are shared in mythbuntu but they dont show on this pc [02:05] strange [02:05] did you setup the workgroups correctly on both computers also? [02:06] like the same name yeah [02:06] open a cmd.exe window, try to ping the linux machine by ip address [02:06] if that works, start/run, type \\linuxmachineipaddress\ [02:07] hmm timed out bit it shows as a connected device under the router config device list [02:17] should i go in and assign a static ip or let it auto config? [02:21] does your DHCP server (usually your router) provide a reliable IP address to all your machines, which remains the same between reboots (including router reboots)? if not, then yes, assign a static IP [02:22] yeah the router pretty muchs keeps them the same [02:22] any other suggestions should i be seing a valid ip in ifconfig [02:25] tried to ping the router and the other computer from the terminal and it says network unreachable ? [03:20] anyone use snapstream firefly or X10 remote? [03:23] I don't but I have seen them mentioned in the mythtv users mailing list before [12:04] hi everyone. I seem to have a problem between the ears in that I am somehow "loosing" recordings. That means they do not show up once recorded in the Media->Recordings ... They are not expired by the backend ... could someone please help me clear this up? I might just misunderstand this. [12:06] media->recordings only shows the "Live TV" recordings ... [12:24] RockHound: the recordnings are catagorized by live recordings and timed [12:24] doh ... a filter was active === Wckt2 is now known as WcktKlwn === Wckt2 is now known as WcktKlwn [14:20] Hi All [14:20] directhx earlier this week helped me with some video display problem. [14:21] I managed to do what was suggested and have returned for additional instruction if anyone would be kind enough to tell me what I need to do. [14:22] The problem I am having is getting Xorg.conf with the correct settings to display a picture on the monitor. === Wckt2 is now known as WcktKlwn [14:22] My motherboard has onboard video (vidia 6150) and I want to use a PCIe card. [14:23] Xorg.conf will only recognize the onboard video and I don't know how to get it to recognize the PCIe card. [14:23] Can anyone help? [14:30] What lspci command to display only video devices? [14:39] I figured it out, the command to use is lspci -X | grep -i "vga\|display" [14:50] I was able to reconfigure xorg and specify the bus ID of the pcie video card and it works now. I will post a detailed description of the issue and the fix on the mythbuntu section of the mythbuntu forum. [15:10] ping superm1_ [15:11] superm1_, I need your help :D [15:14] !last superm1_ [15:14] Sorry, I don't know anything about last superm1_ - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi [15:14] !seen superm1_ [15:14] Sorry, I don't know anything about seen superm1_ - try searching on http://ubotu.ubuntu-nl.org/factoids.cgi === Wckt2 is now known as WcktKlwn [18:05] hi [18:05] i just got here [18:06] sebrock, you here? === Wckt2 is now known as WcktKlwn [18:30] superm1_: how can i toubleshoot an error from irremote when it says unable to find gap? [18:30] it doesn't seem to happen on any particular button [18:30] or at after any particular amount of button presses === Wckt2 is now known as WcktKlwn [18:58] superm1_, !! [18:58] seems we pass each other all the time :D [18:59] superm1_, however, I changed my sources and got the precompiled lirc package thats in the hardy rep. But the PAD keys still wont work :( [19:00] lircd --version says: lircd 0.8.3pre1 || according to the changelog it should inlcude pad2keys right? [19:11] sebrock, [19:11] um [19:11] there is another step beyond that [19:11] because of the way the kernel modules are handled [19:11] you will have to have lirc-modules-source from the hardy package too [19:11] and then build it with module assistant [19:24] superm1_, can you tell me how I do this? [19:24] install lirc-modules-source [19:24] sudo dpkg-reconfigure lirc-modules-source [19:24] sudo m-a update,prepare [19:24] sudo m-a a-i lirc [19:24] so that will replace the one I have now then? [19:25] well it will build some new ones and install them [19:25] there will be something else to do still though [19:25] get this prat done though [19:25] Why is it not included in the version in hardy rep? [19:27] the modules aren't shipped in that package [19:27] they are shipped in a kernel package [19:27] Damn, are you here tomorrow, I have to go now... [19:27] but since you can't use a hardy kernel [19:27] aww.... [19:28] you have to build them manually in that case [19:28] maybe it is easied to do as you described yesterday? [19:28] well that still requires you to do this [19:28] and first remove this package altogether [19:28] oh ok... em [19:28] i'll be around [19:28] dont know what time [19:28] but i'll be around at some point [19:28] hmm... [19:28] ok, I'll try to contact you then [19:28] thanks though [19:28] ok np[ === superm1_ is now known as superm1 [20:20] http://www.mythbuntu.org/documentation/mythbuntu_installation.pdf gives me 403 right now [20:20] does anybody here have privileges on the site? [20:58] KjetilK, it's being worked on thanks [20:59] tgm4883_laptop: ok, thank you! [21:00] I'm working on setting up my Hauppauge PVR-150 remote, and apparently it didn't just work out of the box, but is what is in the mythtv wiki http://www.mythtv.org/wiki/index.php/Hauppauge_PVR-150 at all relevant for a mythbuntu setup? [21:21] KjetilK: the manual link is fixed [21:22] Daviey: thanks! [21:23] * KjetilK feels a bit lost, but people had told me it is as anticipated ;-) [21:23] the docs are very much needed, of course :-) [23:23] * Dr_willis wakes up [23:23] Hmm. I got my 150 all set up. that one dialog/box dident select it by default however - i 'knew' to select the Right entry in there. :) [23:24] problem i had 3with the remote was that there seems to be 3 different ones.. (dog bone? and some other descriptions) wasemt sure what one i had.