[00:24] My upload was rejected: [00:24] Rejected: Signer has no upload rights at all to this distribution. [00:24] Not permitted to upload to the RELEASE pocket in a series in the 'CURRENT' state. [00:24] I had used gutsy, is that not permitted? [00:25] Laibsch: gutsy is released indeed. stable release and all. [00:27] I am not sure anymore if that is the problem [00:27] Laibsch: You've probably done "dput ", which will default to trying to upload to Ubuntu. [00:27] RAOF: I am pretty sure I uploaded to my-ppa [00:27] Let me try again [00:27] RAOF: Indeed, I did [00:28] That little sucker "my-ppa" is just too easy to forget :-/ [00:28] Thanks [00:28] Yay for consistent error messages. [00:28] Laibsch: You can edit ~/.dput.cf to change the default target. [00:30] how? [00:30] I think that should be put in the docu [00:30] I just c&p'd from there [00:31] ACCEPTED! [00:31] Unbelievable, after all this time ;-) [00:32] Laibsch: You'd be looking for the big [DEFAULT] section at the top of your .dput.cf. CHange the default_host_main to point to whatever section you want (most likely my-ppa) [00:33] RAOF: Sorry, this must seem stupid to you. But I was just using ~/.dput.cf so far [00:35] Oh. It's entirely possible that I copied /etc/dput.cf to ~/.dput.cf and then edited it. [00:35] I just followed the ppa intro doc [00:36] In that case you have to always remember "dput my-ppa *.change" [00:36] s [00:37] Right. That could perhaps be rewritten. [01:31] * Hobbsee smashes edge with a large brick [01:31] * Hobbsee smashes edge with a large brick again, due to the redirect [01:31] GAH!!! [01:32] Hobbsee: problems? [01:32] OOPS-753E166 for accepting packages from https://launchpad.net/ubuntu/dapper/+queue?queue_state=1&queue_text= [01:32] https://devpad.canonical.com/~jamesh/oops.cgi/753E166 [01:32] edge on that URL times out. [01:32] so, now i can't use launchpad at all to do that. [01:32] * mtaylor kicks edge helpfully [01:33] Hobbsee: you can turn off your edge redirect for a bit [01:33] mtaylor: see the oops link - that's on production. [01:34] cprov: are you here? [01:34] Hobbsee: yes [01:34] cprov: can you accept the 3 packages on https://launchpad.net/ubuntu/dapper/+queue?queue_state=1&queue_text= somewhere other than the web UI, please? [01:35] Hobbsee: that queue shows up for me on edge [01:35] Hobbsee: of course, I don't have permission to do anything with it [01:35] mtaylor: yes, but try accepting something from it :) [01:35] mtaylor: it shows fine. it just doesn't "do" anything :) [01:35] hehe [01:35] well now there's your problem... you want it to _do_ something [01:35] and i'd really like some action. i dont' like just watching packages... [01:36] yes :( [01:36] Hobbsee: what's the problem with the web-ui ? [01:36] cprov: [01:36] [12:32] OOPS-753E166 for accepting packages from https://launchpad.net/ubuntu/dapper/+queue?queue_state=1&queue_text= [01:36] [12:32] https://devpad.canonical.com/~jamesh/oops.cgi/753E166 [01:36] https://devpad.canonical.com/~jamesh/oops.cgi/753E166 [01:36] https://edge.launchpad.net/ubuntu/dapper/+queue?queue_state=1&queue_text= gives OOPS-753EC6 [01:37] ah ha. it appears it works for lamont [01:38] so, launchpad gods, what does that OOPS mean that duck-power defeats? [02:50] New bug: #185229 in launchpad-bazaar "show number of times a branch has been copied/checked out" [Wishlist,New] https://launchpad.net/bugs/185229 === thumper_laptop is now known as thumper [03:05] New bug: #185233 in launchpad-bazaar "Use rate of revisions to inform the tag cloud" [Undecided,New] https://launchpad.net/bugs/185233 === gryc_ is now known as gryc === mwh__ is now known as mwh [07:29] bzr: ERROR: File exists: '/~ndb-connectors/ndb-connectors/telco-6.3/.bzr.backup': mkdir failed: unable to mkdir [07:29] got that when trying to upgrade a repos on lp [07:35] mtaylor: if you log in via sftp, is there a /~ndb-connectors/ndb-connectors/telco-6.3/.bzr.backup directory? [07:36] mtaylor: also, it will probably be quicker to clear all the files from the branch and push a new copy [07:37] jamesh: yes. and now I feel dumb for not thinking of logging in with sftp [07:37] mtaylor: i.e. "lftp sftp://bazaar.launchpad.net/~ndb-connectors/ndb-connectors/telco-6.3/" then "rm -rf .bzr .bzr.backup" [07:37] mtaylor: then push the upgraded branch again [07:38] mtaylor: an upgrade will effectively need to read every file in the branch then write them again [07:38] so the it is quicker to skip the "read every file" bit [07:38] jamesh: oh, well that's not very good - yes. I agree! [07:41] after pushing your upgraded branch, the public version will get upgraded as well [07:53] mtaylor: have any luck? [08:42] morning === carlos_ is now known as carlos [09:02] Gooooooooooooooooooooood morning Launchpadders! [09:28] is there a doc on Karma? [09:54] how do you package non binary packages? such as themes and such? [11:55] New bug: #185325 in malone ""You can report bugs by visiting the package's page" ... and then doing something else" [Undecided,New] https://launchpad.net/bugs/185325 [12:06] New bug: #185328 in launchpad "Publishing history has only distribution series codenames, not version numbers" [Undecided,New] https://launchpad.net/bugs/185328 === mrevell is now known as mrevell-lunch === kiko-afk is now known as kiko === \sh_away is now known as \sh === mrevell-lunch is now known as mrevell [13:03] moo [13:04] yay [13:50] New bug: #185350 in malone "Project driver can't see a private bug report about the project" [Undecided,New] https://launchpad.net/bugs/185350 [14:01] New bug: #185353 in launchpad-bazaar "loggerhead content urls" [Undecided,New] https://launchpad.net/bugs/185353 === \sh is now known as \sh_away === \sh_away is now known as \sh === kiko is now known as kiko-phone [14:36] Why is a .pot file awaiting "review", even though our first .pot file has been imported? (For the dcplusplus project) [14:37] Also getting "There is 1 error." when trying to change the status (of a .pot). [14:47] danilos: Are you able to help Ullner? === matsubara is now known as matsubara-lunch [14:49] Ullner: they go through automatic approval process, and that's a script which sometimes takes a few hours to run [14:50] Ok [14:51] What can be done about the error message, then? I thought I'd re-upload an "awaiting review" file (because I'm the founder of the team, managing the project) in case there were some weird permission issue. [14:51] But since that, too, is awaiting review, I want to delete it. [14:52] (But can't, hence the error message.) === bigon` is now known as bigon === kiko-phone is now known as kiko-fud [15:16] dear launchpad, why is https://edge.launchpad.net/ubuntu/gutsy/+source/ucf/2.0021ubuntu1 404? [15:16] * lamont needs _that_ version [15:17] lamont: iz lp bug. [15:17] OOPS-753EA65 [15:17] sigh [15:17] lamont: apparently one of the URL's are supposed to work now [15:17] ?? === salgado is now known as salgado-lunch [15:18] https://edge.launchpad.net/ubuntu/+source/ucf/2.0021ubuntu1 [15:18] ^ files are supposed to work now. [15:19] lamont: apparently distributing binaries without sources isn't regarded as a critical bug on LP [15:19] or, at least one worth fixing asap, seeing as tehy were looking at it days ago, i think [15:19] ah, yes. ok [15:20] lamont: current solution: tough luck and give up, or attempt to search thru librarian, or find an old, out of date mirror. [15:20] the version without /gutsy/ in it comes up just fine... the link, OTOH, iz b0rked. [15:20] * lamont has the source [15:22] lamont: you can get to the actual files after that? [15:22] feh [15:22] Ullner: the error message is a bug when doing any modifications on the any but the first page [15:22] Ullner: (first page of import queue, that is) [15:23] Ullner: you should be able to do any required modifications from https://translations.edge.launchpad.net/dcplusplus/+imports [15:23] lamont: (and if so, how?) [15:24] Hobbsee: no. I have 404 replies from LP, saved as the filenames. kthx [15:24] ...yay [15:28] * lamont looks around for something to slap Hobbsee with [15:28] * Hobbsee hands lamont a herring. [15:28] lamont: what have i done now? [15:28] cheering when I'm being grumbly [15:28] I need that file [15:29] you fail at sarcasm detection 101. [15:29] actual cheering would be "yay!", not "...yay" [15:29] lol [15:29] * Hobbsee trouts lamont [15:29] besides, don't you have dc access? can't you just look for the file internally or something? [15:30] find, um, didn't. [15:30] :-( [15:30] darn [15:36] it'll be on the librarian, named as its hash I suspect :) [15:45] danilos: I'm still getting the same error. [15:46] (And this is the first, and only, page of the import queue.) [15:48] Ullner: which one of the two entries for the same template are you trying to remove? [15:49] The second. [15:51] (or, well, it's the same .pot file, so I guess it doesn't matter unless the automagic script looks at time of upload.) [15:54] Ullner: I'll take a look at the issue [15:54] Thanks. === matsubara-lunch is now known as matsubara [15:55] Err, now there's a "dcpp-win32-xx" template? o_O [15:58] Either the dcpp-win32 should get removed and the -xx one should be renamed, or the -xx .pot file should be moved over and the -xx template removed. [15:58] Ullner: I am renaming it [15:58] (we have problems with multiple templates in the same path) [15:58] Ok. [15:58] Thank you. [16:01] New bug: #185386 in malone "feed not available for advanced search" [Undecided,New] https://launchpad.net/bugs/185386 [16:01] Ullner: I want to check if auto approval script will now auto-approve the other one (this may cause another delay of a few hours, but I'd rather test to make sure this works than to manually approve it and have to do that again in the future) [16:04] Fine. [16:05] Did you do something to approve my pot, while the older was left intact? [16:06] Seems weird that not both, or at least the older one first, got approved. [16:40] anyone knows when the ubuntu beryl would release? [16:40] wrong channel. And beryl? [16:41] yeah.. the ubunto berly version.. [16:41] i saw it in youtube.. [16:42] I don't think that exists. [16:42] ahh.. okay.. [16:42] thnx. [16:43] if you don't know that theres no ubunto berly.. just see this url.. [16:43] http://www.youtube.com/watch?v=ZD7QraljRfM [16:47] beyu-: You can do that with compiz, which is installed and enabled (when supported) by default. [16:48] Offtopic here though. If you want to discuss this go to #ubuntu [16:50] okay.. sorry for the wrung address.. :) === kiko-fud is now known as kiko === salgado-lunch is now known as salgado [18:05] New bug: #185427 in malone "Convert to question doesn't notify to the reporter" [Undecided,New] https://launchpad.net/bugs/185427 === Ullner_F is now known as Ullner === Gwaihir_ is now known as Gwahiri === Gwahiri is now known as Gwaihir [19:22] New bug: #185445 in launchpad "Team page should have a big red flashing unsubscribe button" [Undecided,New] https://launchpad.net/bugs/185445 === bugman_ is now known as BugMaN [19:36] New bug: #185444 in launchpad "Team pages should show who is subscribed" [Undecided,New] https://launchpad.net/bugs/185444 === neversfelde_ is now known as neversfelde [19:45] New bug: #185455 in launchpad "please add mhonarc to launchpad-developer-dependencies" [High,New] https://launchpad.net/bugs/185455 === salgado is now known as salgado-brb === salgado-brb is now known as salgado [21:14] hi, I'm trying to convince the translation tool to make available a second translation template (my project is split into two parts with separate .pot's)...currently I have one pot uploaded, and now I added the second pot and got the message that it'll be imported into the first template... [21:17] this is obviously wrong - I want to create a second template, but there's no button for doing that so I hoped that it would do it automagically when uploading templates... [21:18] what's worse - I cant stop the import now it seems - in the import queue if I try to select "deleted" it shows "There is 1 error." without anything more specific === \sh is now known as \sh_away [21:40] New bug: #185475 in launchpad ""Projects ... is involved with" page doesn't divulge how they're involved" [Undecided,New] https://launchpad.net/bugs/185475 [21:53] hello === Kmos_ is now known as Kmos [22:04] should I have a separate bzr branch for each version ## of a softwaer? [22:30] hi, is it possible to remove empathy/0.21.1-0ubuntu1~ppa2 from the telepathy ppa for the hardy distribution? [22:31] New bug: #185486 in launchpad "Merge account option should be on profile page" [Undecided,New] https://launchpad.net/bugs/185486 [22:41] ffm, that depends on the size of your project. Many larger projects have a separate branch for each version, so that their contributors can keep fixing bugs and implementing features on the mainline while keeping the branch more stable. [22:41] mpt: this is a project with about 3 active developers [22:49] nobody for removing pkg from a ppa? [22:52] bigon: Ask a question against soyuz or wait for the LP to get rolled out tomorrow and work right. [22:53] k === bigon is now known as bigon` [23:44] Am I right in thinking that I still need to ask a question to get a SVN repo mirrored?