mrbean | mpalyer video does the same thing. | 00:09 |
---|---|---|
mrbean | dont have tvtime install right now. | 00:09 |
mrbean | so you think its an ivtv issue? | 00:10 |
mrbean | i have a pvr500, it uses the ivtv driver/module | 00:11 |
laga | probably | 00:19 |
mrbean | Ive worked on this all weekend. Tired of hacking so Im rebuilding it with some different (and less) hardware. | 00:26 |
laga | hum | 00:31 |
laga | i can't play some recordings on my remote frontend although they're there.. | 00:31 |
mrbean | you select a recording and what happens? | 00:45 |
laga | tries to play back and jumps to the min menu again. must be something in svn trunk, this used to work | 00:48 |
laga | getting odd log messages on the backend, too. i suppose i'll have to bug someone tomorrow :) | 00:48 |
Aquahallic | Evenin' folks....;) | 01:55 |
octogone | i enabled the VNC service via mythbuntu-control-centre, and can connect to it using vncviewer, but the display is all garbage and my mouse clicks seem to do nothing. | 03:32 |
octogone | i tried a sudo netstat -pant to find out what process was listening on port 5900 in the hopes that i could track something down, but it just says that the process listening is "X" | 03:33 |
octogone | how can i find out the name of the VNC service that the control centre installed so i can read about it? | 03:34 |
superm1 | restart the comp | 03:36 |
superm1 | it starts with the x server | 03:36 |
superm1 | and see if its still like that | 03:37 |
superm1 | it is an X module that gets loaded | 03:37 |
octogone | yeah, i had to restart to get it to even start | 03:39 |
octogone | it's running. it listens on 5900. it even authenticates properly | 03:40 |
octogone | hmm, it seems to just be a graphics issue... | 03:44 |
superm1 | are you using the opengl painter? | 03:58 |
zouzou | hi all, | 04:21 |
zouzou | i installed mybuntu-desktop on my ubuntu box, but when i start the front-end, it says that either the backend isn't started or the IP is not correct, i checked and both are fine | 04:22 |
zouzou | i started the backend as follows /etc/init.d/mythtv-backend start (restart) | 04:22 |
zouzou | and IP addresses on both the setup and the frontend setup are both :127.0.0.1 | 04:23 |
astyler | Hello, I have a question about a mythbuntu installation | 04:39 |
astyler | If anyone is out there: is there a 64-bit distro that will work with an intel chip? (the 64bit distro is listed as AMD64) | 04:40 |
astyler | i got the answer over in #ubuntu | 04:52 |
=== Tar1 is now known as Tari | ||
=== Tari is now known as Tari|zzz | ||
MythbuntuGuest92 | Mahlzeit! | 10:49 |
MythbuntuGuest92 | bin newbe und hoffe mir kann einer von euch helfen | 10:50 |
MythbuntuGuest92 | hab am we Mythbuntu inst und finds vom aufbau her auch klasse | 10:50 |
MythbuntuGuest92 | aber meine Videos sind auf einem Netzlaufwerk hinterlegt | 10:51 |
MythbuntuGuest92 | wie kann ich auf der grafischen Oberfläche eine Netzlaufwerkverbindung machen? | 10:51 |
mckemie | can I get some newbie help here? | 15:13 |
mckemie | Well, I'll just chat along here as if someone is listening. | 15:15 |
mckemie | I have a new Mythbuntu install I'm trying to get working. I have a Hauppauge 350 and only the onboard Compaq video. | 15:16 |
mckemie | I was under the apparent misconception that the SVideo connection on the 350 was an output and that I could get by without a "good" video card. | 15:17 |
=== Tari|zzz is now known as Tari | ||
mckemie | I haven't been able to get myth to display any tv programming, though mplayer will play at least one tv (antenna) channel. However, mplayer will not play using a "-vo xv" option. How might I get myth to not assume I have a "good" video card? | 15:22 |
rhpot1991_laptop | mckemie: https://help.ubuntu.com/community/MythTV_Gutsy_hardware_pvr-350_TV-out | 15:35 |
rhpot1991_laptop | can try that out | 15:35 |
rhpot1991_laptop | I haven't used the output on my 350 in a while, but have heard a lot of complaining about it not working so well anymore | 15:36 |
mckemie | Thanks for the URL to the doc, rhpot1991_laptop. | 17:47 |
mckemie | My /proc/fb is empty. I'm not sure what that means, but I guess I need one for the new module to work. | 17:48 |
rhpot1991_laptop | prob need to sudo modprobe ivtv-fb | 18:09 |
rhpot1991_laptop | provided its installed, used to come with the ivtv-dev package IIRC, no idea where it lives today | 18:09 |
rhpot1991_laptop | http://www.mythtv.org/wiki/index.php/Hauppauge_PVR-350 | 18:09 |
rhpot1991_laptop | that might help out some too | 18:09 |
mckemie | modprobe ivtv-fb did it, thanks. Onward through the fog. | 18:15 |
superm1 | need to get that stuff automated still for hardy. | 18:17 |
superm1 | bleh. | 18:17 |
rhpot1991_laptop | mckemie: you are gonna want to add that to /etc/modules I think | 18:17 |
superm1 | mckemie, any info not documented on h.u.c's wiki, can you please add | 18:17 |
rhpot1991_laptop | to make load on boot | 18:17 |
rhpot1991_laptop | yep, thats where I used to have mune, /etc/modules | 18:18 |
rhpot1991_laptop | superm1: see what I said about xwrt web interface? | 18:19 |
superm1 | ah just looked | 18:19 |
superm1 | interesting | 18:19 |
superm1 | so you're telling me that's the "easy" way :) | 18:19 |
rhpot1991_laptop | appears so | 18:20 |
rhpot1991_laptop | though when I tried to restore it was unhappy about uploading that file | 18:20 |
rhpot1991_laptop | too large | 18:20 |
rhpot1991_laptop | via the web interface that is | 18:20 |
superm1 | well doing it via command line isn't too bad | 18:20 |
superm1 | but that's odd | 18:20 |
rhpot1991_laptop | multiple ssid's acts strange out of the box too, I added a 2nd one and can connect to that with the authentication for my first one | 18:23 |
rhpot1991_laptop | I need to set up some bridges in /etc/network I guess | 18:23 |
superm1 | yeah i made bridges, but mine is all messed up still too | 18:23 |
superm1 | every so often my laptop wants to connect to my wep one | 18:23 |
superm1 | even though the ssid is hidden | 18:23 |
superm1 | i think i need to reset my keyring or something | 18:24 |
rhpot1991_laptop | I messed with the bridges some but was confused at the lines at the top with the "1 2 3 4 5*" and so on | 18:24 |
rhpot1991_laptop | ended up losing connectivity all together | 18:24 |
superm1 | oh that represents the ports on the back | 18:24 |
superm1 | 1234 are typically physical ports | 18:24 |
superm1 | 5 is the wifi | 18:24 |
rhpot1991_laptop | I figured that much, is 5 wifi? | 18:24 |
rhpot1991_laptop | kinda guessed that | 18:24 |
superm1 | depending on the router either 1 or 4 is the wan | 18:24 |
superm1 | mine is backwards from the norm | 18:24 |
rhpot1991_laptop | I think mine might be 0 | 18:24 |
rhpot1991_laptop | let me ssh in | 18:24 |
rhpot1991_laptop | do you use dyndns btw? | 18:25 |
superm1 | used to | 18:25 |
superm1 | havent bothered atm | 18:25 |
rhpot1991_laptop | I didn't think it used to let you toss ports onto the host name | 18:25 |
superm1 | i've got a new philosophy about being too accessible | 18:25 |
rhpot1991_laptop | but it is letting me do that now | 18:25 |
rhpot1991_laptop | can prob do it yourself, I did some redirect scripts on my server before I started using dyndns | 18:26 |
superm1 | ah | 18:26 |
rhpot1991_laptop | I mess around with my stuff a lot from work and my parents house when I go home to visit on the weekends, so I would be sad about not being able to reach it | 18:27 |
superm1 | well i try not to do that lately | 18:27 |
superm1 | its bad having this ipod touch too | 18:27 |
superm1 | because i'm far less social when i have it on me | 18:27 |
rhpot1991_laptop | option vlan1 "0 5" | 18:27 |
laga | superm1: heh :) | 18:27 |
rhpot1991_laptop | I think that means my wan is on 0? | 18:27 |
superm1 | let me check mine | 18:28 |
superm1 | well i think i'm mixing mine up here now with what they represent | 18:28 |
superm1 | i understood this before. | 18:28 |
superm1 | because why would you want your wifi tied to your wan | 18:29 |
rhpot1991_laptop | well that is my wan | 18:29 |
superm1 | that's how mine is (backwards: vlan1 = 4 5 | 18:29 |
rhpot1991_laptop | I think I tried to make 2 vlans each touching 5 only | 18:29 |
superm1 | i have a vlan2 that is just 5 | 18:29 |
superm1 | that i use for the second bridge | 18:30 |
superm1 | awesome: open gconf-editor and look at /system/networking/wireless/networks | 18:31 |
superm1 | and you can make it forget networks there | 18:31 |
rhpot1991_laptop | so you only have one wifi interface in /etc/config/network? | 18:32 |
superm1 | well /etc/config/network you list bridges only | 18:32 |
superm1 | so i have one for lan+wifi, one for wan, and one for just wifi | 18:32 |
rhpot1991_laptop | ah ok, I get what you are saying now | 18:32 |
superm1 | http://paste.ubuntu.com/3962/ | 18:33 |
rhpot1991_laptop | are you only doing opendns in there now, or still how that howto said to? | 18:34 |
superm1 | still how it said to | 18:34 |
rhpot1991_laptop | I wonder if thats part of my problem, I dropped the dns lines from /etc/config/network | 18:35 |
rhpot1991_laptop | you were only able to filter mac addresses system wide, right? | 18:38 |
superm1 | right | 18:39 |
superm1 | so i haven't bothered with that yet | 18:39 |
superm1 | i suppose there has to be a really easy iptables rule to do it on just that interface | 18:39 |
rhpot1991_laptop | I came across something indicating you could do it per interface | 18:39 |
rhpot1991_laptop | though that tab is long closed | 18:39 |
superm1 | well if you google'd it, it is in your google search history though | 18:40 |
superm1 | or FF history? | 18:40 |
rhpot1991_laptop | it might be, depends if I did it on this laptop or on my box at home | 18:40 |
rhpot1991_lapto1 | superm1: http://forum.openwrt.org/viewtopic.php?pid=57013 | 18:50 |
rhpot1991_lapto1 | since we are defining our own interfaces for the seperate wifi, one would think you could plug it into that | 18:52 |
superm1 | rhpot1991_lapto1, no i dont think so | 18:57 |
superm1 | that is system wide | 18:57 |
superm1 | for all wifi | 18:57 |
superm1 | its not like we have a wl1 | 18:57 |
blkorpheus | YOU DA MAN SUP | 18:59 |
blkorpheus | keep up the good work | 18:59 |
rhpot1991_lapto1 | I'd think if you tossed gwifi in there, it would work | 18:59 |
superm1 | thx :) | 18:59 |
superm1 | rhpot1991_lapto1, no i dont think so | 18:59 |
superm1 | because that is defined at a software level | 18:59 |
superm1 | this tool works at a hardware level | 19:00 |
blkorpheus | did you know on star trek voyager, kes had a girl named Linux? | 19:00 |
rhpot1991_lapto1 | ah ok | 19:00 |
superm1 | haha that's great | 19:00 |
blkorpheus | if I'm hearing this name correctly | 19:00 |
blkorpheus | just needed to share that with someone | 19:01 |
compy | anyone know how to set up compiz fusion ? | 19:01 |
compy | i installed it but now dont know where to get it | 19:01 |
compy | ** config it ^^ | 19:01 |
rhpot1991_lapto1 | I wonder what would happen if you put the wap one into AP Isolation mode, if it would like that one is running that way and another is not | 19:02 |
blkorpheus | its easy compy | 19:02 |
rhpot1991_lapto1 | s/wap/wep one | 19:02 |
blkorpheus | compy, try right clicking the desktop | 19:02 |
compy | blkorpheus, oh so i used synaptic to install it all, ... ok let me try that | 19:03 |
blkorpheus | things shoud stand out | 19:03 |
compy | so it comes up w/ all my applications... im running xfce | 19:03 |
blkorpheus | ahh | 19:03 |
blkorpheus | ok, hmmm, come to think of it I have never run xcfe with compiz, but I suppose its the same deal | 19:04 |
blkorpheus | one sec | 19:04 |
compy | is there a command line that i can type and set it up | 19:04 |
blkorpheus | compy, http://xubuntublog.wordpress.com/2007/12/09/xubuntu-compiz-pretty-pretty-xubuntu/ | 19:05 |
compy | thanks ill check this out | 19:06 |
compy | blkorpheus, what do you run... ubuntu w/ mythtv? | 19:06 |
blkorpheus | yes | 19:06 |
blkorpheus | exactly that way | 19:07 |
blkorpheus | ubuntu with mythtv | 19:07 |
rhpot1991_lapto1 | what does compiz gain you in reguards to mythtv? | 19:08 |
blkorpheus | I was going to say nothing | 19:08 |
blkorpheus | but then I was palying around last night | 19:08 |
blkorpheus | and while myth takes up a whole screen | 19:08 |
blkorpheus | it was very easy for me to just rotate the cube to my workspace | 19:08 |
blkorpheus | I could still hear the movie adn all , so I could switch back to video, quickly | 19:09 |
rhpot1991_lapto1 | so you don't run on a tv only? | 19:09 |
blkorpheus | no | 19:09 |
rhpot1991_lapto1 | ok, that makes a lot more sense then | 19:09 |
blkorpheus | yeah | 19:09 |
rhpot1991_lapto1 | I just run on my tv, and then nx in if I want to do anything | 19:09 |
blkorpheus | true | 19:09 |
blkorpheus | if I did outputto tv, it would be the tv/monitor for the htpc | 19:11 |
compy | hehe yeah i have a desktop at the moment w/ my mythtv set up | 19:11 |
compy | i dotn record tv at this point | 19:11 |
blkorpheus | compiz shouldbe merged withgnome | 19:12 |
blkorpheus | it seems to just fit together | 19:12 |
blkorpheus | once they can get compiz rock stable | 19:12 |
blkorpheus | recording is the fun part | 19:13 |
rhpot1991_lapto1 | until you break something and get sad that your recording is gone :( | 19:16 |
* rhpot1991_lapto1 has a bad tendency to get everything working and then mess with things till they break | 19:20 | |
laga | me too | 19:20 |
laga | because working stuff is boring. | 19:20 |
rhpot1991_lapto1 | especially at 2am | 19:21 |
laga | heh | 19:21 |
rhpot1991_lapto1 | the fact that everything has to be working to record the wife's soap opera the next day doesn't help anything either | 19:21 |
laga | no | 19:22 |
=== Wckt2 is now known as WcktKlwn | ||
leprasmurf | hello all, anyone know how to get xawtv working with mythbuntu? | 20:14 |
=== dr_fate is now known as blackorpheus | ||
=== blackorpheus is now known as blkorpheus | ||
compy | is it possible to run compiz under fluxbox or openbox... i dont know if what i just said makes any sense | 21:46 |
blkorpheus | compy do you know how to use google? | 22:05 |
blkorpheus | http://www.google.com/search?q=fluxbox+compiz&ie=utf-8&oe=utf-8&aq=t&rls=com.ubuntu:en-US:unofficial&client=firefox-a | 22:06 |
blkorpheus | 4th hit | 22:06 |
blkorpheus | first answer | 22:06 |
blkorpheus | 15secs | 22:06 |
tgm4883_laptop | blkorpheus, compy isn't in here anymore | 22:14 |
blkorpheus | doh | 22:15 |
MythbuntuGuest27 | hi to all | 22:45 |
rhpot1992 | !logs | 22:50 |
ubotu | Channel logs can be found at http://irclogs.ubuntu.com/ - Logs for LoCo channels are at http://logs.ubuntu-eu.org/freenode/ - See also « /msg ubotu ircstats » | 22:50 |
dannyboy79 | can anyone help me figure out my IVTV says it's in use? I am trying to add options to /etc/modprobe.conf for the ivtv module. | 23:54 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!