[00:00] sherl0k, I might be able to help... [00:01] I'm trying to figure out why mysql won't spawn multiple processes [00:01] I have a debian server that does it [00:02] I checked both confs and compared, I didn't see anything on the debian server that would do it [00:04] sorry. I have no experience with that unfortunately [00:04] did you restart the deamon, though? [00:04] Yeah, every time I make changes to the conf I restart the daemon [00:05] ok. Is there an extra package that needs to be installed, or is that functionality built into mysql? [00:05] I'm not really sure, honestly [00:07] Wish I could help. Sorry. [00:07] S'alright [01:51] Hello All [01:51] I really need your help because I become mad due to samba [01:51] what does the log files say? [01:52] electrofreak: what does the log files say? [01:53] anyone can help me, i can't see my samba shares from my windows xp pc [01:54] i have tested all that i can but that still don't work [01:54] Did you restart the samba daemon after making changes? [01:54] yeah I did [01:54] when i launch smbclient -L localhost from ubuntu-server [01:54] that works [01:54] but if launch "net view \\ipadress" or net view \\servername [01:54] it says that it doesn't find anything [01:55] can you do a net view \\ipaddress [01:55] and use the PC's ip instead of the server name? [01:55] no [01:55] that doesn't work too [01:55] can you ping the other machines [01:56] yeah I can [01:56] I use it by SSH [01:56] so the connection between these two is good [01:56] is your windows firewall on? [01:56] anything in the log files? [01:56] that bugger likes to cause problems :P [01:56] yeah i shut down the firewall but that doesn't work too [01:57] and on the Linux side? any firewall? [01:57] nop [01:57] any [01:58] maybe the problem come from my switch [01:58] because [01:58] my windows pc has an ip like 71.120.79.152 [01:58] and the other [01:58] 70.123.45.32 [01:58] not the same at all [01:58] eth0 Link encap:Ethernet HWaddr 00:50:DA:06:7B:71 [01:58] inet addr:81.220.79.152 Bcast:81.220.79.255 Mask:255.255.255.0 [01:58] inet6 addr: fe80::250:daff:fe06:7b71/64 Scope:Link [01:58] UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 [01:58] RX packets:134111 errors:0 dropped:0 overruns:66 frame:0 [01:59] TX packets:937 errors:0 dropped:0 overruns:0 carrier:0 [01:59] collisions:0 txqueuelen:1000 [01:59] RX bytes:8286662 (7.9 MB) TX bytes:140525 (137.2 KB) [01:59] Interrupt:10 Base address:0xa000 [01:59] this is my eth0 configuration under ubuntu-server [01:59] I think samba shares have to be done on the same network [01:59] yeh but [01:59] i can access to my windows shares from my ubuntu-server pc with smbclient [02:00] that's why it's really strange! [02:00] open a terminal [02:00] run testparm [02:00] that will tell you if there are any errors in your samba config [02:02] [global] [02:02] workgroup = MSHOME [02:02] server string = %h server (Samba, Ubuntu) [02:02] interfaces = eth0 [02:02] security = SHARE [02:02] passwd program = /usr/bin/passwd %u [02:02] passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spa$ [02:02] syslog = 0 [02:02] log file = /var/log/samba/log.%m [02:02] max log size = 50 [02:02] dns proxy = No [02:02] panic action = /usr/share/samba/panic-action %d [02:02] invalid users = root [02:02] yeah i now testparm [02:02] this my smb.conf [global] [02:02] maybe it's my interfaces line that is not good [02:02] and my share test : [02:02] [ftp] [02:02] comment = Test [02:02] path = /tmp [02:02] guest ok = Yes [02:03] what do you think about? [02:03] hm [02:04] are there multiple interfaces on the server? [02:08] no [02:08] just lo [02:08] and eth0 [02:10] how can i modify the broadcast? [02:10] because it appears that it's not the same between windows and linux [12:59] Greetings [15:11] hello, i am configuring bonding, and i don't know where i can put the module config options [15:13] incorrect: look at /etc/modprobe.d [15:13] i can't find the .local file :S [15:15] i am sure a few revisions ago i used to put my custom options in their own file [17:43] incorrect: Just create it? [17:44] soren, yes i was being stupid, its a .d :) so all files would be loaded :) doh took me 30 mins to notice that [17:44] *g* [17:44] somedays you can't see the wood from the trees [17:45] i am looking for X where is X i am not happy until i find it, there is no spoon [17:49] incorrect: :) [17:54] not specific to u-s however, anyone dealt with MPM under apache vs. pre-fork [17:55] isn't that a case of, do you want to run php or not [17:55] No. [17:55] have they fixed that [17:56] It's a case of whether you want to use mod_php5. [17:56] There are other ways to run php, though. [17:56] ok [17:56] fastcgi being the interesting choice. [17:56] that is more what i meant [17:57] Well, there might be other reasons, but that's the usual reason for resorting to prefork. [17:58] i am going to try out one of those php accelerators soon [18:00] * soren goes to dinner [18:14] unfortunately I'm tackling a multi-layered issue of 'suck' involving apache-mpm, ensim (yes, not my choice), php [18:14] all of which resounds to sites taking about 2-3 minutes to load [18:17] issue that it is't is cpu/mem (dual core, load 0.12 5min avg.), 200mb free (+buffers, etc), 0 swap in use [18:17] anyways, it's not u-s specific so I'll leave it out of here [18:17] feel free to /msg me if you ideas though [18:18] faulkes-, why don't you try out, one sec [18:18] i am going to have similar issues, [18:35] well, I guess he incorrect had a bigger issue ;) [18:35] * faulkes- whistles innocently [18:39] wow, my english and spelling are terrible this afternoon [19:24] What is the best way to add my Vista laptop to samba so that I might access my desktop? [20:49] hi - installed 7.10 server - nic 8029 says unclaimed - can anyone advise plz? [20:53] more words would explain your situation much better :) [20:54] thnx [20:54] fresh install of 7.10 server [20:54] network card seems to be noticed [20:54] but eth0 is not there from ifconfig [20:55] ifconfig show only configured interfaces, not all interfaces [20:55] s/show/shows [20:55] how do i configure the network card? [20:55] so, dhclient eth0 should connect to your dhcp server [20:55] static ip address [20:55] if you don't have one, set it up manually [20:55] ifconfig eth0 192.168.0.1 netmask 255.255.255.0 up [20:56] static ip address is entered in interfaces [20:56] that would be a good start [20:56] ill try that [20:56] thnx [20:56] errors [20:56] says no such device [20:57] try eth1 [20:57] yet lshw -C network lists the card [20:57] k [20:57] no such device again [20:58] if eth1 works, problem is most probably in udev rules [20:58] eth1 gives same error [20:58] ok [20:58] how many nics do you have? [20:58] 1 [20:58] all right [20:58] go to /etc/udev/rules.d [20:58] k [20:59] there is a file 70-persistent-net.rules [20:59] is there anything in it? [20:59] i see it [20:59] mom [20:59] mom? [20:59] empty [20:59] moment [21:00] empty... [21:00] hm... [21:00] dmesg | grep eth [21:00] any strange info in output? [21:00] no output [21:01] that's not nice [21:01] which network card is that? [21:01] lspci | grep Network [21:01] rtl 8029 AS [21:01] capital N in Network? [21:02] yes [21:02] no output [21:02] im in su mode [21:02] lspci | grep Ethernet [21:03] showing usage info [21:03] ill try again [21:03] ok [21:03] hm [21:03] that's 10mbit card? [21:04] like, very old card? :) [21:04] shows 00:0B.0 Ethernet controller: Realtel Semiconductor Co., Ltd. RTL-8029(AS0 [21:04] its an old card yes [21:04] try this: [21:04] sudo modprobe 8390 [21:04] on athlon 1000 system [21:04] sudo modprobe ne2k-pci [21:05] do i type sudo when im in su? [21:05] no need [21:05] done [21:05] 9 I TRIED THAT BEFORE TOO ) [21:05] opps [21:05] caps [21:06] run dmesg [21:06] and check if card is recognized [21:06] ran straight off screen :D [21:06] any control panel that is available in the repos for managing a lamp ubuntu server? I was looking for webmin, seems i am a bit behind on the news about server staff :) thanks [21:07] pause function? switch? [21:07] Alpha0606: you need only last couple of lines [21:07] if there's something about nic, then you are on a good track [21:07] NET: registered protocol familt 10 [21:07] alefteris: iirc, nothing :) [21:08] that's not it :/ [21:08] lo: disabled privacy extensions [21:08] nothing else related on screen [21:08] no... [21:09] i looked in boot log earlier....... [21:09] that's everything i know about rtl8029 [21:09] i know it's was problematic when it was released [21:09] found..... ne2k-pci probe 000:00:08.0 failed with error -16 [21:10] does that help? [21:10] ive got an 8139B and 8139D here too [21:10] yeah... well, it doesn't help, but we might found where the problem is [21:10] k [21:11] well, those cards are 100mbit, iirc [21:11] you should use those [21:11] but they wont detect during install [21:11] do you have any other PCI slots in computer? [21:11] is it possible to shut down , change card, then install nic only ? [21:11] yes i do [21:12] of course it's possible [21:12] well yeah - sorry - daft question ur right [21:12] :) [21:12] but is it fairly eaasy? :) [21:13] you shouldn't do a thing [21:13] i googled but all i could find was references to network manager :/ [21:13] will auto detect on startup? [21:14] are we talking about server or desktop? [21:14] server [21:14] it will auto detect on startup [21:14] there's no network manager on server [21:14] machine restarting now with 8139B in it [21:15] wow [21:15] screen full of segmentation fault? [21:15] whats that mean? [21:16] http://en.wikipedia.org/wiki/Segmentation_fault [21:16] k - ive restarted with the 8139D in anyway [21:16] i dont tend to panic ;) [21:16] :D [21:16] segfaults aren't caused by nic [21:17] im looking to replnld oblrver [21:17] replace an old cobalt server that was :) [21:18] ok [21:18] machine restarted [21:18] if i do /etc/init.d/networking restart i get no such device still on eth0 [21:19] dmesg | grep eth [21:19] no output [21:19] dmesg | grep 8139 [21:20] sudo modprobe 8139too [21:20] ivoks, it sucks not having an easy to install web interface for admin by default, is it a todo thing for future versions? [21:20] alefteris: yes [21:20] blueprint? [21:20] search for ebox [21:20] ok thanks [21:21] done the modprobe 8139too [21:21] !ebox [21:21] ebox is a web-based GUI interface for administering a server. It is designed to work with Ubuntu/Debian style configuration management. See the plans for Hardy at https://wiki.ubuntu.com/EboxSpec [21:21] ok cheers [21:21] Alpha0606: now run dmesg [21:22] still cant see any reference to nic [21:22] try with other PCI slots [21:22] lp: ? [21:22] i'll be back later [21:22] lp: driver loaded but no devices found [21:23] :/ === ivoks_ is now known as ivoks [21:31] i think i try to get a different nic [21:32] this is a brand new belkin on an 8139D and it wont see it [21:33] change PCI slot [21:33] done [21:33] those cards work perfectly under ubuntu [21:33] yeah? [21:33] hum [21:33] ill go for slot 1 this time [21:36] just says no such device [21:37] try with 8139cp [21:37] k [21:37] modprobe 8139cp [21:37] no such device [21:38] any other 8139 drivers? [21:38] nope [21:39] reinstall tomorrow then looks like :) [21:39] it won't help [21:39] damn :/ [21:39] check out bios [21:39] ur sure 8139D are ok? [21:39] look for IRQ settings [21:39] what in BIOS? [21:39] k [21:41] oaed ll defaults [21:41] loaded [21:42] slot 5 ethernet irq10 [21:44] 8139cp tried on startup - it suggests try 8139too [21:45] no good [21:46] still no such device [21:48] probe of ..... failed with error -16 again [21:48] i wonder what error -16 is [21:49] ivoks - thnx for all ur time - i think its time to rest the brain ;) [21:49] i appreciate ur help [21:50] np [23:01] hey guys is there a command to show all mounted volumes? [23:03] hmm nevermind lol