[00:02] <staind9383> is there another way to test if the box is functioning correctly other than using that priming script?
[00:03] <tgm4883_laptop> staind9383, your cable company may have encrypted every channel
[00:03] <staind9383> if that was the case, would priming fail?
[00:04] <tgm4883_laptop> i'm not sure about a SA4250HD, but on the motorola boxes, you can check the encrypted status of a channel
[00:04] <tgm4883_laptop> um
[00:04] <tgm4883_laptop> because it's encypted
[00:05] <tgm4883_laptop> and your computer isn't properly responding to the question, "what kind of device are you"
[00:05] <tgm4883_laptop> it's all about DRM
[00:05] <staind9383> hrm
[00:05] <staind9383> is that normal to have a cable co just suddenly turn it on?
[00:06] <tgm4883_laptop> it's happened before
[00:07] <tgm4883_laptop> you might try googling about a diagnostic screen for your STB.  the motorola 62xx ones have it.  Maybe yours does too
[00:07] <staind9383> do you know which status page on SA boxes the encyption status is on?
[00:08] <staind9383> o ok
[00:08]  * tgm4883_laptop shrugs
[00:08] <tgm4883_laptop> like i said, i've only used the 6200's
[00:08] <tgm4883_laptop> but what you want to look for is
[00:08] <tgm4883_laptop> 5c implementation
[00:08] <tgm4883_laptop> and
[00:08] <tgm4883_laptop> CCI broadcast flag
[00:09] <tgm4883_laptop> or a variation of what those say
[00:14] <staind9383> ok, i'll look for those
[00:16] <staind9383> ok
[00:16] <staind9383> there is a value: Src CCI
[00:16] <staind9383> well, maybe its a flag
[00:17] <staind9383> 'SrcCCI: Free'
[00:19] <staind9383> scrolling through the channels (even premiums) the only values i see are 'free' and  'undefined' for the Src CCI flag
[00:20] <staind9383> i think that i am going to try a clean install and setup again.  I just got the box off the ground a month ago and i dont have much on it
[00:20] <staind9383> the mythbox that is
[00:44]  * pwnguin solved the XV problem
[00:45] <pwnguin> seems like the fallback display config decided vesa was a good option
[01:00] <directhex> yes, it does that
[01:00] <directhex> by design
[01:00] <directhex> vesa's mostly guaranteed to work on anything
[01:25] <Egghead3> is vnc broken in 8.04 alpha?
[01:26] <pwnguin> they recently switched the server
[01:27] <Egghead3> pwnguin, huh?
[01:29] <pwnguin> the software that serves vnc in hardy
[01:29] <pwnguin> used to be realvnc
[01:29] <pwnguin> it's been switched
[01:29] <pwnguin> i donno if they have a migration tool for settings
[01:30] <Egghead3> its now vnc4server, like in gusty
[01:31] <npurciful> hey got a question here, if i get a external hdd for mythtv i just tell it to mount via fstab right
[01:31] <Egghead3> well it seems to work some what, i connect, password etc, and get a screen, but when i mouse clikc/ ok key anything, it errors out on the client side with error waiting for server message, and the sever side restarts gdm
[01:32] <Egghead3> npurciful, donno, is it a usb?
[01:33] <npurciful> yeah
[01:34] <Egghead3> was hoping someone else experience the same problem, and its not me, lmao
[01:35] <pwnguin> i havent been able to set it up right in 7.10 ;)
[01:35] <pwnguin> firewall somewhere i guess
[01:35] <Egghead3> npurciful, sorry i dont have any usb drive hooked up, but they arnt too speedy, you sure u want to use that interface?
[01:35] <npurciful> well it has firewire too
[01:35] <npurciful> i have a firewire port i just have ever used it
[01:36] <Egghead3> pwnguin, in 7.10 its a breeze, no pun intended, just make sure u rem out the atp source entry for the cdrom
[01:36] <pwnguin> yea
[01:36] <pwnguin> i got that far
[01:36] <pwnguin> but i still get an error about connection refused
[01:36] <Egghead3> well 2.0 and firewire are ~smae speed
[01:37] <Egghead3> pwnguin, ahh maybe in the xorg.conf, under screen section(s)?
[01:38] <Egghead3> there needs to be the option for the /root/passwd file
[01:39] <pwnguin> well, we're nearly done configuring it and im fine with the command line ;)
[01:39] <pwnguin> ssh ftw
[01:40] <Egghead3> lol oh yea, cantr get much done w/o the ssh or winscp for tyhat matter
[01:40] <Egghead3> so id have to say ssh/winscp ftw
[01:40] <Egghead3> lmao
[01:43] <npurciful> alright i am burnt out from trying to fix my audio, going to watch some tv
[01:43] <Egghead3> npurcifu, i feel your pain man :)
[01:45] <npurciful> it been rough, i had it working before i just cant rembemer how i fixed it ( my av reciever switch audio modes on new song, fast forward, etc and it causes about 2sec of silence) it is annoy to say the least
[01:46] <npurciful> and system bells, notification do here them there less than 2 seconds
[01:46] <npurciful> do not\
[01:47] <npurciful> ansd it is just PCM not ac3 or dts
[02:08] <mdwildcat04> I hve a quick question
[02:09] <mdwildcat04> how do I go about getting the cover art and info for my videos in mythvideo?
[02:15] <Egghead3> mdwildcat04, you put them in the directory under /var/lib/myth/pictures
[02:15] <pwnguin> can i get mythvideo to use stills from the video the way nautilus' gthumbnailer does?
[02:16] <mdwildcat04> is there an app or script to automaticly fetch them, like MusicBrainz Picard does for music?
[02:16] <Egghead3> donno about that penguin
[02:16] <Egghead3> mdwildcat04, you will need to edit the mysql database too
[02:16] <Egghead3> using the php myadmin
[02:18] <Egghead3> basically its a pain in the butt, i wish i knew of a good script
[02:19] <Egghead3> if i had the time id make one, but then again last time i used sql was with r-base, omg im old lmao
[02:53] <MythbuntuGuest11> hello
[02:54] <JoshT> Just curious, when is the next 8.04 release scheduled?
[02:56] <JoshT> ping
[02:57] <mdwildcat04> april 08
[02:58] <mdwildcat04> note, ubuntu version # corespond with their release date
[02:58] <mdwildcat04> (year).(month)
[02:58] <JoshT> o, ok i was wondering about anything realated to alphas, just curious about VNC fix and pvr-150 transmitter fix... sorry
[02:59] <JoshT> i am aware of the april/october deal, was curious about the alphas or in between fixes
[03:01] <mdwildcat04> oh, sorry
[03:02] <Egghead3> JoshT, have u heard of any work arounds for the vnc issues?
[03:03] <JoshT> no, i was checking here first
[03:03] <Egghead3> ahhh, me too
[03:03] <JoshT> there was a password issue with one of the pre-releases for 7.10 that got fixed up, but this is different
[03:04] <JoshT> on the pvr-150 transmitter issue i was wondering if it was mythbuntu related or lirc related
[03:04] <Egghead3> i need to tackle that issue too
[03:05] <JoshT> i use a .pl script to change  channels in 7.10, i never figured out if the lirc could transmit LOL
[03:06] <JoshT> and used a serial port changer that i bought for my directv box
[03:06] <superm1> JoshT, you're referring to the instability in vnc
[03:06] <superm1> as in a keypress crashes it?
[03:06] <JoshT> yessir
[03:06] <JoshT> how you been?
[03:06] <Egghead3> me too
[03:07] <JoshT> or a keypress crashes the session and it ends up at the login screen
[03:07] <superm1> eg bug 184225
[03:07] <JoshT> ok
[03:07] <superm1> and bug 180619
[03:07]  * superm1 kicks ubotu ?
[03:07] <superm1> https://bugs.edge.launchpad.net/ubuntu/+source/vnc4/+bug/184225
[03:07] <superm1> https://bugs.edge.launchpad.net/ubuntu/+source/vnc4/+bug/180619
[03:08] <superm1> don't have much of a plan yet for a solution
[03:08] <superm1> if you look closer at 184225, it's across the board on many distros
[03:08] <JoshT> i see that
[03:08] <Egghead3> ahh so its vncserver?
[03:08] <superm1> yeah
[03:08] <superm1> you can remove vnc4server
[03:08] <superm1> and install x11vnc
[03:08] <superm1> and use that
[03:09] <superm1> which that might end up having to be our "solution" for 8.04
[03:09] <JoshT> what about the pcr-150 transmit issue?
[03:09] <superm1> what's the issue?
[03:09] <superm1> not working?
[03:09] <JoshT> ooops pvr - meant
[03:09] <JoshT> yes, when i try to enable the transmit it crashes the control centre, i thnik cause lirc hangs?
[03:10] <superm1> this is with the latest versions of everything in 8.04?
[03:10] <JoshT> yah i was trying it out
[03:10] <superm1> did you file a crash report?
[03:10] <superm1> apport should catch it..
[03:11] <JoshT> i didnt because i read that there was something with pvr-150 that was unstable or not working 100%
[03:11] <Egghead3> i read the same on mythbuntu site
[03:11] <JoshT> "Rudimentary transmitter selection support is available for all devices but the pvr-150."
[03:12] <JoshT> was just curious if that is lirc related
[03:12] <Egghead3> have u tried installing w/o control panel?
[03:12] <superm1> well the missing piece of transmitter support is the transmit script and the firmware
[03:12] <JoshT> no i haven't
[03:12] <superm1> you shouldn't have been getting that issue
[03:12] <JoshT> good idea
[03:12] <superm1> with it hanging
[03:13] <superm1> so if you can reproduce it and file a report, that would be great
[03:13] <superm1> i'm hoping its just an instability of the pvr-150 module (there is a patch waiting to be applied to the kernel about it)
[03:13] <JoshT> i expand the terminal box and it hangs at lirc configuring and then the an crash is detected of the control centre, i will run it again and file a rport
[03:14] <JoshT> cool
[03:14] <superm1> thanks :)
[03:14] <Egghead3> superm1, do u know where the startup line is for vnc4server?
[03:14] <superm1> Egghead3, it starts with the X server
[03:14] <superm1> as in a module
[03:14] <superm1> take it out of xorg.conf
[03:14] <superm1> if you dont want it to start up
[03:14] <superm1> (thats what MCC does)
[03:15] <Egghead3> ahh cool, ill tryout that x11vnc :)
[03:15] <superm1> Egghead3, if you have good luck with it please let us know
[03:16] <superm1> we need an alternative solution :)
[03:18] <Egghead3> ok will do :)
[03:18] <superm1> it's either that or vino
[03:18] <superm1> as an option
[03:18] <superm1> but i'd hate to have to install that big gnome package vino lives in
[03:19] <Egghead3> in xorg.conf, it just calls out module option "vnc", is that a config file, if so u know where it lives?
[03:19] <tritium> superm1: I just ordered an HDHomeRun today, and a DB2 antenna.  I'm looking forward to their arrival!
[03:19] <superm1> tritium, wonderful :)
[03:19] <superm1> Egghead3, its not a config file
[03:19] <superm1> its an xorg module
[03:20] <tritium> :)
[03:20] <Egghead3> ahh, so if i uninstall vnc4server, and ilstall x11vnc, itll find x11vnc instead of vnc4server?
[03:21] <superm1> Egghead3, unfortunately not
[03:21] <superm1> nothing else but vnc4server provides vnc.so
[03:21] <superm1> that module
[03:21] <Egghead3> hehe didnt think so lol
[03:21] <superm1> so x11vnc is a process you would need to start on login
[03:21] <superm1> and experiment with options and stuff
[03:21] <superm1> (hence why we haven't switched over to it) - that has to all be explorer
[03:21] <superm1> explored
[03:22] <Egghead3> k, ill tuck it in rc.local and see it that flys :)
[03:22] <superm1> that won't fly unfort
[03:22] <superm1> it needs to go in after x starts
[03:23] <superm1> you can however place it in ~/.mythtv/session
[03:23] <Egghead3> :)
[03:23] <superm1> that file is launched at login if it exists and is executable
[04:08] <Egghead3> superm1, x11vnc worked great, i added it to the /etc/gdm/xsession startup script, thanks :)
[04:08] <superm1> Egghead3, did you have to configure much?
[04:08] <superm1> or how did you go about it?
[04:09] <Egghead3> https://help.ubuntu.com/community/x11vnc
[04:09] <Egghead3> this site walked me thru it
[04:10] <Egghead3> real easy, x11vnc doesnt seem as fast, but it might just be me
[04:10] <superm1> oh well this is good, it appears it can use the standard vncpasswd to generate a password
[04:10] <superm1> it is slower i'm pretty sure
[04:10] <superm1> make sure that your recordings still work well
[04:10] <superm1> and that performance of the session is good
[04:10] <superm1> because that was my biggest worry switching to this
[04:11] <Egghead3> my recordings?
[04:11] <superm1> yeah
[04:11] <superm1> like from the tv
[04:11] <superm1> try to play them bak
[04:11] <superm1> back
[04:11] <superm1> and make sure they dont skip
[04:11] <superm1> cut out etc
[04:11] <Egghead3> never could play video across vnc
[04:12] <superm1> well yeah that wont change but i'm saying that having the x11vnc process running may have negative effects
[04:12] <Egghead3> using mythvideo, never tried watcing a recording
[04:12] <superm1> when you just try to watch them "normally"
[04:12] <superm1> so just make sure
[04:12] <Egghead3> ahhh ic
[04:12] <Egghead3> well, i cant now, mythbackend is broke too :(
[04:12] <superm1> so you have x11vnc installed but not vnc4server at all right now right?
[04:13] <Egghead3> yes, unistalled in mmc, then using synaptic installed x11vnc
[04:13] <superm1> okay great -can you check one more thing then
[04:13] <superm1> do you have a /usr/bin/vncpasswd?
[04:13] <Egghead3> sure
[04:13] <superm1> and if you do, can you do a:
[04:13] <superm1> ls -l /usr/bin/vncpasswd
[04:13] <superm1> and see where it points
[04:14] <Egghead3> its there but just sez elf
[04:14] <superm1> not ld
[04:14] <superm1> ls
[04:15] <Egghead3> the passwd work im using for x11vnc is in /root/.vnc/passwd
[04:15] <superm1> right, i'm just looking to see if this registered with the alternatives system
[04:15] <superm1> if it did, then that will mean very little source changes necessary to use it
[04:16] <Egghead3> not sure what ld vs ld means
[04:16] <Egghead3> oops ld vs ls
[04:16] <superm1> just tyle
[04:17] <superm1> ls -l /usr/bin/vncpasswd
[04:17] <superm1> er type that, not tyle it
[04:17] <superm1> and see the output
[04:17] <Egghead3> ahh ic hehe
[04:17] <superm1> i think you just mistyped it the first time and typed "ld -l /usr/bin/vncpasswd"
[04:18] <Egghead3> lrwxrwxrwx 1 root root    27 2008-02-23 21:43 /usr/bin/vncpasswd -> /etc/alternatives/vncpasswd
[04:18] <superm1> okay
[04:18] <superm1> so do the same thing on
[04:18] <superm1> /etc/alternatives/vncpasswd
[04:18] <Egghead3> ok
[04:18] <superm1> and see where that one points
[04:20] <Egghead3> lrwxrwxrwx 1 root root 19 2008-02-23 21:42 /etc/alternatives/vncpasswd -> /usr/bin/vnc4passwd
[04:20] <Egghead3> and so on?
[04:20] <superm1> well so according to that you still have a vnc4 package installed
[04:20] <superm1> hm
[04:20] <superm1> okay that will have to be sorted out then still
[04:20] <superm1> we'll see what ends up being the solution
[04:20] <Egghead3> well in synaptic it wasnt listed as installed
[04:20] <superm1> but for now this should work for you at least :)
[04:21] <Egghead3> hehe thanks for that :)
[04:22] <Egghead3> as long as i have u here, my mythbackend is broke too
[04:22] <superm1> how?
[04:23] <Egghead3> well at boot up it starts the config script, then sez it cant fine the upnp database
[04:23] <superm1> is this a secondary backend?
[04:23] <superm1> or primary
[04:23] <Egghead3> primary
[04:23] <Egghead3> it also happens when trying to run frontend
[04:23] <superm1> have you checked sql tables for consistency problems?
[04:24] <superm1> eg repair/optimize
[04:25] <Egghead3> no, but it started right after i let it update, then when firing up front end it asked to redo the database to another build level or somthing like that
[04:25] <superm1> do the consistency check then
[04:25] <Egghead3> i tried running the optimize script in the contrib directory, but it failed
[04:26] <superm1> run it from mcc
[04:26] <superm1> that should work
[04:26] <superm1> also make sure your disk(s) aren't full
[04:26] <Egghead3> ok till try that
[04:27] <Egghead3> another thing , it seems that mythbackend is running, and itll spin the hd for like 5 mins stop and do it again every now and again
[04:27] <superm1> see what the results of the optimizing are first before you worry about that
[04:27] <Egghead3> ok
[04:32] <Egghead3> root@myth1-desktop:~# vnc4server --help
[04:32] <Egghead3> The program 'vnc4server' is currently not installed.  You can install it by typing:
[04:32] <Egghead3> i just check to see if vnc4server was still there
[04:34] <Egghead3> but anyway, i optimized database in mcc, and than ran frontend, it still end up with same error, cant find upnp database, then finally it sez cant logon to database, wrong password?
[04:34] <superm1> Egghead3, i found its from vnc4common
[04:34] <superm1> not a worry
[04:34] <Egghead3> ahh
[04:34] <superm1> Egghead3, restart mysql and then restart the backend after optimizing
[04:34] <Egghead3> i think vnc4common was still install as far as synaptic saw it
[04:35] <superm1> and then check the log (/var/log/mythtv/mythbackend.log)
[04:35] <superm1> yeah it is
[04:35] <superm1> its a dependency for a few things
[04:35] <Egghead3> ok
[04:35] <Egghead3> how do i restart backend?
[04:36] <superm1> /etc/init.d/mythtv-backend restart
[04:37] <Egghead3> thanks
[04:38] <Egghead3> holy, my mythback end log is 750mbytes
[04:39] <superm1> so is that perhaps your issue :)?
[04:39] <Egghead3> i donno, kinda large id think
[04:40] <Egghead3> can i just delete it?
[04:41] <Egghead3> thats probably what its writing to all this time
[04:41] <superm1> tail the end of it
[04:41] <superm1> tail -n 1000 file
[04:41] <superm1> or so
[04:41] <superm1> to see whats up
[04:41] <Egghead3> ok
[04:43] <Egghead3> hmm, i thinkits a password problem
[04:45] <superm1> dont be quick to expect that to be it
[04:45] <superm1> especially if it was working before
[04:45] <superm1> you didnt change the password, and neither did anything else
[04:46] <Egghead3> umm id like to say that, but yes i did change the password :(
[04:46] <superm1> okay well then have fun :)
[04:46] <Egghead3> thought id be easier to have it somthing i could rember , lol
[04:47] <Egghead3> well its a new install so loosing the database ist a worrie
[04:48] <Egghead3> whats the easiest way to dump the database?
[04:48] <superm1> dump as in drop it?
[04:49] <Egghead3> yes
[04:49] <Egghead3> will deleting it, setup to make a new one, with new password?
[04:50] <Egghead3> will deleting it, cause mythtv setup to make a new one, with new password?
[04:52] <superm1> easiest way is to remove mythtv-database and mysql-server-*
[04:52] <superm1> via a purge
[04:52] <superm1> apt-get remove --purge PACKGE
[04:52] <superm1> and then reinstall them
[04:52] <Egghead3> cool, sounds good
[05:20] <Egghead3> well tried all that, purged and reinstalled, but same thing
[05:20] <Egghead3> its wierd the log keeps growing, as if somthing keeps running the mythconfig script, same thing over and over
[05:29] <Egghead3> well time for bed, superm1 thanks for all your help :) you the man!
[05:29] <superm1> no prob, night
[06:10] <msfree> running 7.10 the internal player and mplayer give blocky techno colored playback but xine works fine with a -V opengl has anyone seen this before?
[07:06] <pwnguin> is there seriously no way to add your own rss feeds to the news thingy?
[07:43] <pwnguin> fun. i set up a new folder for games in /var/lib/mythtv
[07:43] <pwnguin> and set it on share
[07:44] <pwnguin> and now the others wont show (on share)
[13:34] <DiggThis> hi all
[13:34] <DiggThis> was wondering if anyone knows how to 'fit' mythtv display to a 16:10 monitor? cant work it out
[13:38] <directhex|work> not sure i understand the question
[13:39] <DiggThis> ok well ill explain
[13:40] <DiggThis> my monitor is 16:10 aspect ratio and runs at 1680x1050 resolution but when i start mythbuntu and watch tv it defaults to 16:9 ratio and therefore appears letterboxed on my screen
[13:40] <DiggThis> i want it to fill the screen with no cropping
[13:43] <DiggThis> anyone?
[14:00] <directhex|work> yeah
[14:00] <directhex|work> somewhere in the frontend settings you can force 4:3 or 16:9 aspect
[14:01] <DiggThis> thx but no go with that setting
[14:01] <DiggThis> any other suggestions?
[14:06] <directhex|work> fiddle with DisplaySize in xorg.conf, to mess with your DPI, to make mkyth think you're 19:9 not 16:10
[14:07] <DiggThis> k
[14:07] <DiggThis> ill try that
[14:07] <DiggThis> thx
[14:40] <Rigolo> good afternoon
[14:41] <Rigolo> ggrrr  screen is messing up my keys ...
[14:44] <jarle__> unable to upgrade database schema after upgrading to lastet mythbuntu build: http://pastebin.ca/917574 Any help?
[15:23] <DiggThis> nothing seems to work when i try to stretch mythtv screen to 16:10
[15:23] <DiggThis> anyone know anything?
[18:26] <tpdd> With the most current mythbuntu i get slotchy or multicollored blocks when i playback mpeg2 or from a dvd using the internal player or myplayer
[18:27] <tpdd> has anyone seen this before
[18:32] <its_me_gb> hi, when i try to run mythbackend i get these errors, what should i do? http://pastebin.ubuntu.com/4979/
[19:51] <directhex> superm1, has an unbroken amd64 build appeared yet?
[19:52] <foxbuntu> directhex: *POOF*
[19:52] <directhex> liar. i have a wife!
[19:52] <foxbuntu> lol
[19:53] <foxbuntu> oh the number of ways that could be taken
[19:56] <npurciful> well i just ordered a HDHomerun
[19:57] <npurciful> i think Silcondust has it price fixed 169$ everywhere but newegg and it is 189$ there
[19:58] <npurciful> hum no new weekly yet
[21:13] <jakemonO> how do i debug/troubleshoot mythfilldatabase? it doesn;t run automagically...I have to manually start it?
[21:19] <Littleninjai> hallo
[21:31] <huhlig> could someone help me with a small sound problem
[21:32] <huhlig> I get sound but even with a poweramp at max and alsamixer at max its hard to hear
[21:34] <directhex> huhlig, try changing your frontend to use alsa instead of oss
[21:34] <huhlig> it is using alsa
[21:35] <directhex> the default mixer in the frontend is alsa:default ?
[21:38] <huhlig> im not even there
[21:39] <huhlig> I am at the command line trying to get it to play
[21:43] <huhlig> directhex: any ideas?
[21:44] <directhex> not really
[21:44] <jakemonO> any help w/mythfilldatabase?
[21:57] <huhlig> any idea how I can crank up the volume
[21:57] <huhlig> ?
[23:15] <sslashes> any idea what the module name that would handle loading the xvideo extension(s) in xorg is/are?
[23:18] <staind9383> where can I get the kernel docs that contain the  get_dvb_firmware script?  linux-headers-2.6.22-14-generic doesnt have it.  unless of course i am looking in the wrong place
[23:19] <directhex> -headers- is just headers
[23:20] <staind9383> o
[23:20] <directhex> try linux-doc-2.6.22
[23:21] <staind9383> thx
[23:21] <directhex> look in /usr/share/doc/linux-doc-2.6.22/Documentation/dvb/
[23:24] <staind9383> no linux-doc in there
[23:25] <staind9383> i got it, thx
[23:51] <sslashes> xvmc: anyone up to offering sa crash course for me? 1) i need to figure out if i need to do anything special in xorg.conf to load xvmc; 2) mythtv and xine are already setup to use it
[23:52] <sslashes> i have an nvidia 8600 GTS using ubuntu's package of the nvidia proprietary drivers
[23:52] <huhlig> could someone help me with a quick sound problem, I have a sound blaster audigy LS and it has nearly no volume now(Just upgraded ubuntu), If I turn all the volumes way up it you can hear it but barely.
[23:53] <sslashes> huhlig: have you fiddled with alsamixer?
[23:53] <huhlig> sslashes, yes
[23:55] <directhex> sslashes, if you have a cpu to match a 8600, you don't need ot want xvmc
[23:55] <huhlig> volumes are at max
[23:55] <huhlig> digital output is off
[23:57] <npurciful> hey can someone type my nick
[23:57] <sslashes> npurciful:
[23:57] <npurciful> awsome
[23:58] <npurciful> i have managed a work around for my sound issue
[23:59] <npurciful> play a silent wav file 24/7 to keep my reciever from changing modes on every sound it receives