| KillerKiwi2005 | jayshotta: you need to set some keys in gconf there is no ui yet | 00:05 |
|---|---|---|
| jayshotta | ooh ok | 00:05 |
| KillerKiwi2005 | jayshotta: http://mythbuntu.org/node/130 | 00:06 |
| MythbuntuGuest89 | Hi, for some reason I have to restart the backend before TV recording (or live tv) will work. (hdhomerun) | 00:06 |
| tgm4883_laptop | anyone have the new vista mce remote and know how to program the buttons? | 00:06 |
| MythbuntuGuest89 | Any idea what could be the issue? | 00:07 |
| MythbuntuGuest89 | Otherwise, mythbuntu is working great. | 00:07 |
| KillerKiwi2005 | MythbuntuGuest89: have u checked the /var/log/mythtv/mythbackend.log | 00:08 |
| KillerKiwi2005 | tgm4883_laptop: what device is it /dev/irc0 ? | 00:08 |
| jayshotta | How do I access gconf | 00:08 |
| KillerKiwi2005 | alt-f2 gconf-editor | 00:09 |
| tgm4883_laptop | KillerKiwi2005, probably /dev/lirc0, it shows up the same as a MCDUSB2, I actually just need to program the volume and power buttons | 00:09 |
| jayshotta | ok | 00:09 |
| MythbuntuGuest89 | HDHRChan(ffffffff/0), Error: Unable to send discovery request | 00:09 |
| MythbuntuGuest89 | Killerkiwi2005: I suspect that the network is not up and available before the backend starts for some reason | 00:10 |
| tgm4883_laptop | KillerKiwi2005, it's this remote http://www.newegg.com/Product/Product.aspx?Item=N82E16880121001 | 00:10 |
| KillerKiwi2005 | tgm4883_laptop: check out irrecord to capture other keys | 00:10 |
| KillerKiwi2005 | MythbuntuGuest89: are you using network manager? | 00:11 |
| MythbuntuGuest89 | Im using whatever is the default. I just installed the lastest version of mythbuntu | 00:11 |
| tgm4883_laptop | KillerKiwi2005, not what i'm asking. I want the remote to emulate the regular tv remote and control the volume and tv directly not though ir blasting | 00:11 |
| KillerKiwi2005 | ahh i see | 00:12 |
| KillerKiwi2005 | that remote is programable isnt it..... | 00:12 |
| tgm4883_laptop | yep | 00:12 |
| tgm4883_laptop | but doesn't conform to the other USBMCE2 commands | 00:13 |
| dthacker | how do I get the picture adustments menu to come up in myth frontend. I've tried the F key I found in the docs but nothing happens? | 00:13 |
| KillerKiwi2005 | I never got that working with my mce remote...... didnt try that hard though | 00:13 |
| tgm4883_laptop | KillerKiwi2005, it works with all my other MCEUSB2 remotes but this remote is different and I lost the manual :( | 00:14 |
| KillerKiwi2005 | tgm4883_laptop: same... i threw the manual out ;) | 00:15 |
| * dthacker looks for key commands in the setup menu | 00:15 | |
| MythbuntuGuest89 | KillerKiwi2005: I guess I'm using network manager, if that is what is in the new version. Should I try something else? | 00:15 |
| KillerKiwi2005 | MythbuntuGuest89: try setting the netwrok connection to be static | 00:15 |
| MythbuntuGuest89 | via the network icon in the top right corner, or some other way? | 00:16 |
| KillerKiwi2005 | MythbuntuGuest89: left click on the connection in the tray and click on manual | 00:16 |
| KillerKiwi2005 | MythbuntuGuest89: select your connection and click properties... disable roaming | 00:17 |
| KillerKiwi2005 | MythbuntuGuest89: you will then need to complete the connection details... that will make network connection start at boot instead of after the desktop starts | 00:18 |
| dthacker | Is there a config file that will let me see what keys are mapped to which functions during playback or watching live tv? | 00:18 |
| MythbuntuGuest89 | I will try that. Thanks, KillerKiwi. | 00:18 |
| KillerKiwi2005 | dthacker: there is a key setup screen in myth .21 + | 00:18 |
| * dthacker checks version | 00:19 | |
| tgm4883_laptop | KillerKiwi2005, dthacker that program is a plugin that is installable | 00:19 |
| KillerKiwi2005 | ahh true | 00:19 |
| KillerKiwi2005 | ... should be there by default ;) | 00:20 |
| dthacker | I have 0.02-20070828 | 00:20 |
| KillerKiwi2005 | dthacker: you can install the plugin from the mythbuntu setup panel | 00:20 |
| dthacker | on the backend or frontend? | 00:20 |
| KillerKiwi2005 | frontend... i would guess | 00:21 |
| jayshotta | I keep getting symbolic link error in mythweb when I click on videos | 00:21 |
| dthacker | I just ran through setup. TV Settings, I don't see anywhere that I can install anything | 00:23 |
| jayshotta | in in control center | 00:23 |
| jayshotta | go to ur start menu > system > control center | 00:24 |
| KillerKiwi2005 | tgm4883_laptop: what package is the key setup plugin in ? | 00:24 |
| tgm4883_laptop | KillerKiwi2005, sec | 00:25 |
| jayshotta | if u wanna set kets thats in frontend go to setup | 00:25 |
| tgm4883_laptop | yea mythkeys or something | 00:26 |
| jayshotta | yup | 00:26 |
| dthacker | I start frontend. I select setup. I have 3 options Appearance, General, and TV Settings | 00:27 |
| tgm4883_laptop | how do you make xrandr commands permanite? | 00:27 |
| KillerKiwi2005 | tgm4883_laptop: there is no mythkeys | 00:28 |
| tgm4883_laptop | hmm | 00:29 |
| tgm4883_laptop | sec | 00:29 |
| KillerKiwi2005 | is it mythcontrols? | 00:30 |
| dthacker | none of this stuff shows up in the menus.... | 00:31 |
| * dthacker rummages around in .mythtv for a keymap file.... | 00:33 | |
| tgm4883_laptop | dthacker, lircrc | 00:35 |
| dthacker | tgm4883_laptop: this is a frontend only and that file does not exist | 00:36 |
| tgm4883_laptop | dthacker, ~/.mythtv/lircrc | 00:37 |
| dthacker | nope. not there. | 00:37 |
| tgm4883_laptop | strange | 00:38 |
| tgm4883_laptop | did you use mcc to set the remote up? | 00:38 |
| dthacker | It looks like /home/dthacker/.mythtv has a mysql file and two subdirs full of theme files. | 00:38 |
| dthacker | I used adept | 00:38 |
| dthacker | what is mcc? | 00:39 |
| tgm4883_laptop | mythbuntu-control-centre | 00:39 |
| dthacker | does that load with the front-end package? What's the package name? | 00:40 |
| tgm4883_laptop | the package name is | 00:40 |
| tgm4883_laptop | wait for it | 00:40 |
| tgm4883_laptop | just a sec | 00:41 |
| tgm4883_laptop | mythbuntu-control-centre | 00:41 |
| tgm4883_laptop | ;) | 00:41 |
| dthacker | nope. I didn't install it. I must have just started up the front end and answered the questions for running the first time. | 00:43 |
| dthacker | should I install mcc on a frontend only machine? | 00:43 |
| tgm4883_laptop | I don't see why not | 00:44 |
| dthacker | ok, let's see what happens... | 00:44 |
| tgm4883_laptop | what is the screen resolution app called in the command line? | 00:45 |
| dthacker | ok, mcc is installed but it doesn't seen to have put itself on a menu anywhere.... | 00:48 |
| v_ | hi everyone i'm having a problem with mythtv | 00:49 |
| dthacker | join the clug | 00:49 |
| dthacker | club | 00:50 |
| v_ | when I select "Watch tv" in the main menu the screen just flickers | 00:50 |
| tgm4883_laptop | dthacker, start mythbuntu-control-center either from the front end or from the command line | 00:50 |
| v_ | k | 00:51 |
| dthacker | tgm4883_laptop: restarting front end | 00:51 |
| v_ | mcc is up | 00:52 |
| v_ | ohh, nevermind | 00:52 |
| dthacker | tgm4883_laptop: ok at the mcc main menu | 00:53 |
| v_ | so, does anyone know how to fix my problem | 00:53 |
| tgm4883_laptop | v_ pastebin your /var/log/mythtv/mythbackend.log | 00:54 |
| v_ | just a sec | 00:54 |
| dthacker | enable mythcontrols plugin? | 00:55 |
| v_ | do you want me to put the whole file up? | 00:56 |
| tgm4883_laptop | !pastebin | v_ | 00:56 |
| ubotu | v_: pastebin is a service to post multiple-lined texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu-nl.org (make sure you give us the URL for your paste - see also the channel topic) | 00:56 |
| dthacker | I found the keys edit, but I don't see a way to map Picture Adjustments | 01:04 |
| dthacker | F is still not working | 01:04 |
| v_ | http://paste.ubuntu-nl.org/64784/ | 01:05 |
| v_ | sorry it took so long | 01:05 |
| v_ | I just copied the first part because it is the same story throughout | 01:07 |
| tgm4883_laptop | v_, looks like your db password may be incorret | 01:07 |
| tgm4883_laptop | dthacker, picture adjustments? | 01:08 |
| dthacker | It's set as control G | 01:08 |
| dthacker | woot! | 01:08 |
| v_ | is there anyway to reset or figureout what is the correct one | 01:09 |
| tgm4883_laptop | v_, /etc/mythtv/mysql.txt | 01:09 |
| v_ | it is 7T4aWscr | 01:11 |
| v_ | looks correct | 01:11 |
| replman | Hi! Using mythtv with dvb-s on Astra 19,2E...does mythtv get epg automatically? | 01:12 |
| wilberfan | Just installed mythbuntu hardy... | 01:13 |
| wilberfan | :-) | 01:13 |
| wilberfan | but i'm not seeing where to point it to my downloaded (ie, not recorded) videos... | 01:13 |
| wilberfan | and i'm not getting any "watch videos" option on the frontend... (just "watch recordings") | 01:14 |
| destructar | hi all... i'm having some very irritating issues with mythbuntu... frontend is unable to connect to mysql db | 01:15 |
| destructar | i keep getting "you probably should modify the master server settings in the setup program and set the proper ip address" | 01:15 |
| v_ | wilberfan: do you have mythmovie installed? | 01:16 |
| destructar | searching on google seems to suggest that I'm attempting to run frontend remotely, but I'm not. I'm running a backend and frontend server | 01:16 |
| v_ | wilberfan:or mythvideo | 01:16 |
| wilberfan | v_, [whistles] good question! | 01:16 |
| v_ | check in the control center | 01:17 |
| wilberfan | just what i was gonna ask... | 01:17 |
| wilberfan | lemme check... | 01:17 |
| wilberfan | brb | 01:17 |
| wilberfan | NONE of my plugins are checked (except mythweb) | 01:17 |
| destructar | scratch that... just looked at my error again. the problem is, frontend can't connect to backend... "connecting to database" worked, but it fails on "connecting to backend server:127.0.0.1:6543" | 01:18 |
| wilberfan | v_, what is "mythcontrols"? | 01:18 |
| wilberfan | v_, and should I select any (or all) of the "Media Playback Applications"? | 01:18 |
| wilberfan | MPlayer? Xine? VLC? | 01:19 |
| wilberfan | is that telling it to use one--or just installing some or all...? | 01:19 |
| v_ | sorry i had to leave my comp for a sec | 01:21 |
| v_ | you should just have to install mythvideo, you might have to install VLC | 01:22 |
| wilberfan | ok...i've got it pointed to the right folder, etc... but it won't play any of the videos... | 01:24 |
| v_ | do you have VLC, MPlayer or Xine installed? | 01:25 |
| wilberfan | adding vlc and xine and MPlayer now.. | 01:25 |
| wilberfan | :-| | 01:25 |
| wilberfan | I guess they're the ones that play .avi's n' such? | 01:25 |
| v_ | yea | 01:26 |
| wilberfan | does mythhardy do anything different/better than mythgutsy? | 01:26 |
| v_ | hardy boots faster | 01:26 |
| wilberfan | so i know what to look for...? | 01:26 |
| v_ | and is more stable | 01:26 |
| v_ | and is newer | 01:27 |
| wilberfan | :P | 01:27 |
| wilberfan | ok, lemme try this video playback again... | 01:27 |
| wilberfan | I now have HardyPr0n! :-D | 01:28 |
| v_ | It works? | 01:29 |
| wilberfan | the .avi playback stuff, yeah... :) | 01:29 |
| v_ | cool | 01:29 |
| wilberfan | i recording something last night (on the separate recording partition) under Feisty...is there any way to make hardy see that recording?? | 01:29 |
| v_ | can you watch live tv | 01:29 |
| wilberfan | yep | 01:30 |
| wilberfan | don't know if the Hauppage remote works yet, though... | 01:30 |
| wilberfan | I'm gonna have to wrestle with the xorg next... :-O | 01:30 |
| v_ | when you set up myth, did you use a tutorial? | 01:30 |
| wilberfan | you mean the first time? or this time...? | 01:30 |
| v_ | first time | 01:31 |
| wilberfan | wow...i think it was a combination of trying stuff that made sense...and some helpful types in here! | 01:31 |
| wilberfan | i can't really remember exactly... | 01:31 |
| v_ | could you take a look at my backend log file | 01:32 |
| wilberfan | i know it was channel help that helped the most... | 01:32 |
| wilberfan | ME? oh, dude...i'm pretty n00b! I'm not sure i'd have any idea what i was seeing! | 01:32 |
| v_ | http://paste.ubuntu-nl.org/64784/ | 01:32 |
| wilberfan | just as i thought: i have no idea what i'm looking at! | 01:33 |
| v_ | well take a look, when I click "Watch TV" my screen just flashes | 01:33 |
| wilberfan | i DO remember that nothing worked right until I got the permissions correct on the recording partition... | 01:34 |
| wilberfan | in my case: "sudo chown mythtv:mythtv -R /where/recording/partis" | 01:35 |
| wilberfan | i think the "mythtv:mythtv" was crucial? | 01:35 |
| v_ | good Idea!!! | 01:35 |
| wilberfan | it made ALL the diff.... | 01:35 |
| v_ | still doesn't work | 01:37 |
| wilberfan | this will sound n00b, but have you rebooted? | 01:37 |
| wilberfan | (yes, my old Windoze habits!) | 01:38 |
| v_ | do you know how to restart the backend | 01:38 |
| jayshotta | chmod 777 the folder | 01:38 |
| v_ | tried that | 01:38 |
| jayshotta | chmod -R 777 the folder | 01:38 |
| v_ | that too | 01:38 |
| wilberfan | wonder if i need to do that? | 01:38 |
| v_ | do you know how to restart the backend | 01:39 |
| v_ | jayshotta | 01:39 |
| jayshotta | let me check | 01:39 |
| v_ | thnks | 01:39 |
| v_ | *thanks* | 01:39 |
| jayshotta | sudo /etc/init.d/mythtv-backend restart | 01:40 |
| v_ | jayshotta this is my problem: | 01:41 |
| v_ | when I select "Watch tv" in the main menu the screen just flickers | 01:41 |
| wilberfan | brb | 01:41 |
| jayshotta | what card are u using | 01:41 |
| v_ | sabrent saa7130 | 01:42 |
| rhpot1991 | can pvr-xxx's record over analog and svideo at the same time? | 01:42 |
| v_ | works in TV time | 01:42 |
| v_ | rhpot1991: no idea, sorry | 01:42 |
| jayshotta | no that I kno of only pvr 500 | 01:42 |
| jayshotta | rhpot1991 never heard of that card | 01:43 |
| jayshotta | may not be supported | 01:43 |
| v_ | jayshotta: but in tvtime the "TELEVISION" and "COMPOSITE 2" are switched | 01:44 |
| v_ | jayshotta: this is my forum thread: http://ubuntuforums.org/showthread.php?t=769435 | 01:48 |
| jayshotta | ima check | 01:48 |
| v_ | ? | 01:48 |
| Franky_the_Pier | Hi, is there a known problem with pvr-150 remote and a video card nvidia FX5200? I am asking because i tried my pvr-150 in 2 different computers, with the remote working on the 2nd computer... without the fx5200. I wanted to use the fx5200, so i put it in the 2nd computer, then the remote won't work any more, IRW won't work, etc... starting to think it is related to the video card... | 01:53 |
| Franky_the_Pier | (conflict) | 01:54 |
| wilberfan | hmm..my first test recording hesitated every second or so.... | 01:58 |
| v_ | jayshotta, can you figure out anything | 02:00 |
| wilberfan | anyone remember how to turn off the pip preview? that caused a lot of problems for me under gutsy... | 02:02 |
| v_ | I haven't even gotten myth tv to work yet | 02:03 |
| v_ | wilberfan: i'm going to just restart my comp. See you in a couple of minutes | 02:05 |
| vbman11 | i'm back! | 02:09 |
| wilberfan | and we missed you! | 02:14 |
| vbman11 | thanks | 02:17 |
| vbman11 | it still doesn't work | 02:18 |
| vbman11 | I think I should mention that I installed mythbuntu on top of ubuntu | 02:19 |
| wilberfan | vbman11, i did, too... | 02:19 |
| vbman11 | ok | 02:19 |
| wilberfa1 | (I had no idea pidgin could be used for irc....) | 02:19 |
| wilberfan | vbman11, what's no working? | 02:20 |
| wilberfan | t | 02:20 |
| vbman11 | when I click "watch tv" the screen just flickers | 02:21 |
| vbman11 | did you have anything you had to with mysql | 02:21 |
| vbman11 | besides just installing | 02:21 |
| wilberfan | vbman11, no...i didn't do anything specific with mysql | 02:22 |
| vbman11 | no database setup | 02:23 |
| wilberfan | i didn't do anything specific, no... | 02:23 |
| vbman11 | ok | 02:23 |
| wilberfan | you're frontend and backend are the same machine? | 02:23 |
| vbman11 | yep | 02:23 |
| wilberfan | your | 02:23 |
| wilberfan | yeah, same here... | 02:24 |
| wilberfan | are you able to record anything? | 02:24 |
| wilberfan | and then playback? | 02:24 |
| vbman11 | just a sec | 02:24 |
| vbman11 | I will know at 7:31 | 02:26 |
| wilberfan | vbman11, is that an hour from now...or a minute from now...? ;-) | 02:27 |
| vbman11 | 4 minutes | 02:27 |
| vbman11 | 3 minutes | 02:27 |
| wilberfan | mountain standard time, no doubt! | 02:28 |
| vbman11 | yep | 02:28 |
| wilberfan | L.A. here... | 02:29 |
| vbman11 | cool | 02:29 |
| wilberfan | not today, it wasn't! ;) | 02:29 |
| vbman11 | ha | 02:29 |
| vbman11 | ha | 02:29 |
| vbman11 | un minuto! | 02:29 |
| vbman11 | should be done | 02:31 |
| Franky_the_Pier | Hi, is there a known problem with pvr-150 remote and a video card nvidia FX5200? I am asking because i tried my pvr-150 in 2 different computers, with the remote working on the 2nd computer... without the fx5200. I wanted to use the fx5200, so i put it in the 2nd computer, then the remote won't work any more, IRW won't work, etc... starting to think it is related to the video card... | 02:31 |
| Franky_the_Pier | (conflict) | 02:31 |
| destructar_ | should i be concerned about the message "no upnp backends found" when trying to run mythtv setup? | 02:31 |
| vbman11 | yes...kind of | 02:32 |
| destructar_ | what does it mean? | 02:32 |
| vbman11 | I'm not quite sure, sry | 02:33 |
| vbman11 | wilberfan: It says that there are on recording | 02:33 |
| vbman11 | s | 02:33 |
| vbman11 | *no recordings* | 02:34 |
| wilberfan | vbman11, not a good sign, huh.... | 02:35 |
| wilberfan | i'm no where near experienced enough with this to help at this point.... | 02:36 |
| wilberfan | :-| | 02:36 |
| vbman11 | is there anyone else that can help? | 02:36 |
| destructar_ | vbman11: are you sure backend is running? | 02:37 |
| wilberfan | destructar_, how does one verify that? (just curious) | 02:40 |
| destructar_ | one sec | 02:41 |
| destructar_ | ps -p `cat /var/run/mythtv/mythbackend.pid` | 02:41 |
| destructar_ | from terminal of course | 02:42 |
| wilberfan | wow... impressive! | 02:42 |
| wilberfan | "process ID list syntax error" | 02:43 |
| wilberfan | have to do it as root, huh...? | 02:44 |
| wilberfan | PID 5776! :) | 02:44 |
| destructar_ | i don't think you have to do it as root... shouldn't have to | 02:45 |
| wilberfan | how come it doesn't show up in the System Monitor? | 02:45 |
| destructar_ | you used ` instead of ' right? | 02:45 |
| destructar_ | ` = backtick | 02:45 |
| wilberfan | on the end? probably not... | 02:45 |
| destructar_ | the part that is in quotes is actually backquotes (or backticks if you're a moron like me) | 02:46 |
| wilberfan | i had no idea that's what that character was! it worked fine when i used it... | 02:46 |
| wilberfan | any idea why the backend doesn't show up in the system monitor?? | 02:47 |
| destructar_ | it shows up on command line right? | 02:47 |
| wilberfan | wait...it DOES show up in system monitor...if you display ALL processes.... | 02:47 |
| wilberfan | View/all processes | 02:47 |
| destructar_ | i came in late to your problem... what issue are you having? | 02:48 |
| wilberfan | Me? I'm not, at this point... :) | 02:48 |
| destructar_ | oh gotcha | 02:48 |
| wilberfan | vbman11 is having one, though.... | 02:48 |
| destructar_ | my issues tonight are frustrating... | 02:49 |
| wilberfan | i just installed hardy today... finally got myth up and running... | 02:49 |
| wilberfan | :-D | 02:49 |
| destructar_ | installed mythbuntu on top of ubuntu 8.04... | 02:49 |
| wilberfan | ditto | 02:49 |
| destructar_ | that's what i'm attempting to do yea.. | 02:49 |
| destructar_ | so anyway: my frontend wouldn't connect to the backend | 02:49 |
| destructar_ | simple as that... i'm at a loss. | 02:50 |
| destructar_ | i think it had something to do with mysql so i'm reinstalling... (running mythfilldatabase right now actually) | 02:50 |
| wilberfan | ouch. | 02:50 |
| destructar_ | not a huge deal... the bigger problem was last night | 02:50 |
| wilberfan | i can't help with any problem that someone hasn't already solved for ME... ;) | 02:50 |
| destructar_ | i left my kid with a babysitter and when i came home the computer was froze... weird right? | 02:51 |
| wilberfan | your kid froze your linux box?? | 02:51 |
| destructar_ | so I did a hard boot... "fstab error" something or other | 02:51 |
| wilberfan | talented kid! | 02:51 |
| destructar_ | couldn't boot! ubuntu cd couldn't even find the hd at first | 02:51 |
| destructar_ | no... not talented kid: retarded babysitter | 02:51 |
| wilberfan | you know MY (feisty) box froze up a couple of times in the last week... | 02:51 |
| wilberfan | but it always restarted.... | 02:51 |
| destructar_ | i'm pretty sure she started button mashing | 02:51 |
| wilberfan | she probably didn't know WHAT to make of the penquin!! | 02:52 |
| destructar_ | well anyway, long story short: i had to do a full on reinstall so i lost all my settings, recordings etc. etc. | 02:52 |
| wilberfan | major OUCH! | 02:52 |
| kissell | hey, i've been using mythtv for awhile now, and it's all i've ever used... is mythbuntu different/better? | 02:53 |
| vbman11 | so destructar_ | 02:54 |
| OpenMedia | Anyone here played with automating MythBuntu installs using preseed or kickstart? | 02:54 |
| destructar_ | horryay!! | 02:54 |
| destructar_ | everything works now... stupid mysql issue | 02:55 |
| destructar_ | now I just have to install my hd antenna and I'll be good to go | 02:55 |
| destructar_ | vbman11: what problem are you facing? | 02:55 |
| vbman11 | my problem is that my frontend isn't connecting to my backend | 02:55 |
| destructar_ | that was my issue as well | 02:56 |
| destructar_ | did mythfilldatabase (or whatever the command is) work for you? | 02:56 |
| destructar_ | also: this is a fresh install? | 02:56 |
| vbman11 | mythfilldatabase=no | 02:57 |
| vbman11 | install = kindof | 02:57 |
| kissell | all i want myth to do is be a graphical guide for playing my dvd rips, so it just needs to be a menu for my sql database. can i get rid of the "backend"? | 02:57 |
| wilberfan | anyone remember how to turn off the pip preview? | 02:57 |
| destructar_ | vbman11: most likely you're having issues with mysql | 02:58 |
| wilberfan | and more importantly: is there a new Simpsons tonight? | 02:58 |
| kissell | i want to put my mythweb pages online, but my web host won't let me into the /etc/apache2/conf.d folder, so i can't run the backend there... but i can upload PHP pages and SQL | 02:58 |
| destructar_ | in my case I was able to fill the db with channel info etc... but on running mythfrontend i couldn't get the backend | 02:58 |
| vbman11 | destructar_, how did you fix yours | 02:58 |
| destructar_ | i removed my database and ran a command, then reinstalled front and backend (via mythbuntu) | 02:59 |
| destructar_ | ... looking for command | 02:59 |
| vbman11 | thanks for the help | 02:59 |
| destructar_ | sudo dpkg-reconfigure mythtv-database | 02:59 |
| destructar_ | are you using mythbuntu? | 03:00 |
| vbman11 | yep | 03:00 |
| destructar_ | i'm using myhbuntu on top of ubuntu 8.04 | 03:00 |
| vbman11 | me too | 03:00 |
| destructar_ | is this your first install of mythtv? in other words: do you have anything to lose on wiping your db? | 03:00 |
| destructar_ | if not do this: load mythbuntu control center | 03:00 |
| vbman11 | nothing to lose | 03:00 |
| destructar_ | change your system roll by removing front and backend functions | 03:01 |
| destructar_ | then open your terminal, connect to mysql and drop your database | 03:01 |
| destructar_ | mysql -u USERNAME -p -h localhost | 03:01 |
| vbman11 | just a sec | 03:01 |
| destructar_ | enter password | 03:01 |
| destructar_ | drop database mythconverg; | 03:02 |
| destructar_ | then type: exit | 03:02 |
| destructar_ | then enter that above command i pasted: sudo dpkg-reconfigure mythtv-database | 03:02 |
| destructar_ | go back to command center, enable primary backend, and also frontend again | 03:03 |
| destructar_ | run mythtv setup and go through all that mess again | 03:03 |
| destructar_ | then load up mythfrontend and with any luck it will all work for you as it did for me | 03:03 |
| vbman11 | /usr/sbin/dpkg-reconfigure: mythtv-database is broken or not fully installed | 03:04 |
| vbman11 | I think that is a problem | 03:04 |
| MythbuntuGuest87 | anybody get mythubuntu and dishnetwork STB Serial IR working? | 03:04 |
| vbman11 | I'll be back destructar_ | 03:05 |
| destructar_ | vbman11: did you install mythbuntu with synaptic? if not then you should do that right now | 03:05 |
| cal_ | how do i go from knoppmyth to mythbuntu and keep my recorded programs? | 03:06 |
| destructar_ | vbman11: also i think i told you something backwards: reload front and backend before running dpkg-reconfigure | 03:07 |
| vbman11 | ohh! | 03:08 |
| vbman11 | just a sec | 03:09 |
| MythbuntuGuest31 | test | 03:13 |
| MythbuntuGuest31 | anybody get IRblaster working for dishnetwork on mythbuntu 8.04 | 03:13 |
| vbman11 | IT WORKS!!!!!!!!!!!!!!!!!!!!!1 | 03:16 |
| vbman11 | Thanks destructar! | 03:16 |
| destructar_ | awesome :) | 03:16 |
| destructar_ | did you have to run dpkg-reconfigure ? | 03:16 |
| vbman11 | yep | 03:17 |
| shizno | my pvr-350 remote stops working if i enable lirc for my serial irblaster.. has anyone gotten this combination to work? | 03:17 |
| vbman11 | I'm not quite sure what fixed it | 03:17 |
| vbman11 | now I have another problem! | 03:19 |
| destructar_ | it sounds like we both had the same issue. I'm not really sure what caused or fixed it | 03:19 |
| destructar_ | what is it? | 03:19 |
| vbman11 | television and composite 2 inputs are switched | 03:19 |
| vbman11 | my card is a sabrent saa71300000 | 03:20 |
| destructar_ | can't help on that one | 03:20 |
| destructar_ | i use hdhomerun | 03:20 |
| vbman11 | I'll try google. but thanks for the help with mythtv! | 03:20 |
| destructar_ | np | 03:22 |
| Dilligaf63 | Anyone have any luck getting totem to connect to mythtv??? | 03:23 |
| the[V]oid__ | Hi! I'm just trying to install Mythbuntu 8.04 and having a problem: When selecting a DVB-DTV-Card (v3.x) as Capture-Device, it is not possible to change (or even set) the DVB Device Number: It's not possible to write anything into the appropriate field! | 03:24 |
| OpenMedia | Dilligaf63: I've had it working. | 03:25 |
| MythbuntuGuest31 | what's totem? | 03:25 |
| the[V]oid__ | please give me a hint =/ | 03:25 |
| Dilligaf63 | How do you configure totem?? | 03:25 |
| Dilligaf63 | Totem is a media player | 03:25 |
| the[V]oid__ | The device number seems to be set to -1 by default and it's not possible to change it | 03:26 |
| OpenMedia | There is a guide at Mythbuntu.org | 03:26 |
| Dilligaf63 | Do you have a link to the guide? I searched and couldn't find it. | 03:27 |
| Dilligaf63 | I setup uname ans password in gconfig-editor, it still won't connect | 03:27 |
| OpenMedia | http://www.mythbuntu.org/image/tid/9 | 03:28 |
| OpenMedia | first hit on google for "Mythbuntu totem" | 03:28 |
| OpenMedia | Is your MySQL server listening on a public address? | 03:28 |
| Dilligaf63 | Thanks, I found those pictures and setup accordingly, still won't connect. | 03:29 |
| Dilligaf63 | I can connect other frontends to my backend so I assume it is | 03:29 |
| the[V]oid__ | nobody knows? =( | 03:33 |
| OpenMedia | Dilligaf63: Hmm not sure then | 03:54 |
| * rhpot1991 is tempted to get a cloudbook instead of replacing his laptop battery | 03:55 | |
| shawn222 | hi i just installed mythbuntu 8.04 on a computer as just a backend now i am trying to install just a frontend on another computer i am at step 11 mythtv related passwords i have enter the what is in the mysql.txt and it giving a connection results: failure. can someone please help me | 05:40 |
| kypor | anyone get mythtv working using a Hauppauge pvr-350? | 05:48 |
| darthanubis | kypor, http://www.mythtv.org/wiki/index.php/Hauppauge_PVR-350 | 06:22 |
| rhpot1991 | kypor: what is the problem? | 06:23 |
| rhpot1991 | 350 should work OOB for capturing | 06:23 |
| rhpot1991 | or are you trying to do output on it as well? | 06:23 |
| shizno | the 350 worked OOB for me, except for the remote in conjunction with a serial ir blaster | 06:45 |
| shizno | is that a known issue? | 06:45 |
| TazgodX | does teh PVR-150 have S-Video input? | 07:35 |
| TazgodX | and what about the 350? | 07:35 |
| shizno | woo, finally got pvr-350 remote working with a serial ir blaster | 07:59 |
| shizno | last issue is that on reboot my two cards sometimes switch between /dev/video0 and /dev/video1 .. the pvr-350 will be /dev/video0 then on the next reboot it will be /dev/video1 | 08:00 |
| hansoffate | Hey, is there an easy way to upgrade from 7.10 to 8.04? | 08:20 |
| shizno | and that was fixed with... echo 'options ivtv ivtv_first_minor=2' >> /etc/modprobe.d/options | 08:20 |
| hansoffate | well, i'm going to try the upgrade through the update manager. hopefully it doesn't break anything. | 08:25 |
| superm1 | hansoffate, http://mythbuntu.org/8.04/upgrade_notes | 08:30 |
| hansoffate | i started the upgrade. I was just afraid maybe some settings would be lost or something. | 08:31 |
| hansoffate | I haven't checked back at mythbuntu since I got my pvr running. I really like the looks of the new mythbuntu theme. | 08:31 |
| superm1 | well the two gotchas you may or may not run into are detailed on that post, so hopefully nothing else pops up wrong on ya :) | 08:32 |
| superm1 | glad you like the new theme | 08:32 |
| HeMan | is weekly builds for hardy built from the trunk? | 08:52 |
| d110 | I've just installed mythbuntu 804 and I have my EPG configured and can watch tv, but I cannot set anything for record, is there anything obvious I should be checking, apart from the logs | 12:20 |
| hugolp | hi, I have a nova-t-500 and it works randomly. In dmesg I get lots of this [90118.453225] mt2060 I2C read failed | 12:42 |
| hugolp | [90118.461172] mt2060 I2C read failed | 12:42 |
| hugolp | [168939.965145] longhaul: Warning: Timeout while waiting for idle PCI bus. | 12:42 |
| Keithamus | can anyone please tell me how to edit my picture settings (for watching TV) as it is slow and bleached out. | 13:14 |
| Keithamus | anybody? | 13:35 |
| CosMiC_Touch | hi @ all | 15:47 |
| === HeMan is now known as HeMan|away | ||
| mib_rt1eajha | I have episode limits set in my scheduler to 5 per title. I was under the impression that the new Undelete feature would move all deleted items to a new recgroup called Deleted. I only get things in this new group when manually deleteting. Does the episode limit not work with the new Deleted recgroup feature? | 16:49 |
| shizno | mib: that'd be pretty useful | 16:59 |
| mib_rt1eajha | It is in 0.21 and is a great t. | 17:00 |
| === HeMan|away is now known as HeMan | ||
| sidelil | excuse me, if i run the mythbuntu-lircrc-generator script it creates an empty .lircrc file. What shall I do? Should i run it in some different way? | 18:46 |
| jayshotta | Any ideas why I cant see my mythtv shares via Network on ubunut but I an see it when I explore entire network on windows ? | 18:54 |
| shizno | sidelil: i'm a newb to mythbuntu but i think the intention is to setup lirc via the MCC | 19:14 |
| sidelil | shizno, how? My remote is not in the list... | 19:14 |
| sidelil | shizno, actually many keys on my remote are already working, like the arrows, but I dont know how to setup the other keys. Any idea? | 19:16 |
| cal_ | how do i set what the default card will be when 'Watch TV' is chosen? | 19:25 |
| cal_ | why does mythtv keep defaulting to my HD card when i go into live tv? | 19:36 |
| cal_ | it is set as card #3 | 19:37 |
| TazgodX | hmmm, well i can't get coax from a U-Verse STB to a PVR-350 to work, but i got S-Video to work... | 19:37 |
| jayshotta | Any ideas why I cant see my mythtv shares via Network on ubunut but I an see it when I explore entire network on windows ? | 20:01 |
| === MythbuntuGuest60 is now known as shane-kerr | ||
| Nikas | Hello. What does "Scheduled 348 items in 2.3 = 0.03 match + 2.24 place" in the log mean when i shedule recordings? | 20:46 |
| Nikas | And LAMC / LMSC in LiveTV? :) I know what the C stands for... and L... lock? | 20:46 |
| agamotto | Ok, now that that is back to order.... | 20:51 |
| agamotto | Anyone willing to help with digital tuner questions? | 20:52 |
| Alowishus | JUST ASK | 20:55 |
| Alowishus | *sigh* | 20:55 |
| lanuser | Hello - nice work on 8.04 folks, it's goergeous and had to be the easiest Linux install I've ever done! | 21:03 |
| agamotto | Hmm, I think I have found some bug in Xchat under Hardy... oh well | 21:08 |
| agamotto | Question for those who have worked with digital tuners: | 21:08 |
| agamotto | How do you tell MythSetup to use 1 analog tuner card, and 1 digital tuner card? | 21:09 |
| Alowishus | set up two capture cards, one analog, one digital... and then two video sources, one made of analog listings and the other of digital? | 21:15 |
| MythbuntuGuest37 | hello anyone here | 21:17 |
| agamotto | I am here | 21:18 |
| agamotto | Alowishus: Yes | 21:18 |
| MythbuntuGuest37 | howdy | 21:18 |
| lanuser | Hello - nobody but us chickens in here... | 21:18 |
| MythbuntuGuest37 | who is good to ask about mythbuntu problems | 21:18 |
| agamotto | I can cofirm that there is some sort of bug with resizing Xchat windows under Hardy... | 21:18 |
| Alowishus | MythbuntuGuest37: just ask | 21:18 |
| agamotto | Not sure, I am a noob here myself | 21:19 |
| MythbuntuGuest37 | ok here we go | 21:19 |
| agamotto | Ask away... | 21:19 |
| MythbuntuGuest37 | I had the gutsy version all working fine | 21:19 |
| MythbuntuGuest37 | including shutting down and booting up from bios | 21:19 |
| MythbuntuGuest37 | was very nice | 21:19 |
| MythbuntuGuest37 | then before 8.04 i ran some update from the update manager | 21:20 |
| MythbuntuGuest37 | as I was told the mythweb was better | 21:20 |
| MythbuntuGuest37 | then it started to go wrong from there | 21:20 |
| MythbuntuGuest37 | I use mythwelcome | 21:20 |
| MythbuntuGuest37 | when it came on to shedual a recording it displayed cannot connect to server | 21:21 |
| MythbuntuGuest37 | so I did the check sql | 21:21 |
| MythbuntuGuest37 | and it seemed fine | 21:21 |
| MythbuntuGuest37 | could connect and shedual recordings fine | 21:22 |
| MythbuntuGuest37 | then 2 days latter on next recording it only recorded 2 mins of a program | 21:22 |
| MythbuntuGuest37 | so I did an upgrade to 8.04 the other day too see if it helps | 21:23 |
| MythbuntuGuest37 | i have read i need to run a script for the sql to convert from 7 to 8 is that right | 21:23 |
| MythbuntuGuest37 | or did the upgrade fix that | 21:24 |
| agamotto | Yes, the full upgrade should help your problem, but you may need to optimize your SQL tables, I would assume | 21:24 |
| MythbuntuGuest37 | from the control panel thing | 21:24 |
| agamotto | This can be done from Mythbunt control panel under advanced settings, if memory serves | 21:24 |
| MythbuntuGuest37 | yeah i did that | 21:24 |
| agamotto | Still crappola with your recordings? | 21:25 |
| MythbuntuGuest37 | well i will have to see if that has helped as the problem is intermitent | 21:25 |
| MythbuntuGuest37 | tonight went fine | 21:25 |
| MythbuntuGuest37 | i have still got a problem that the font end falls back to desktop after watching tv | 21:25 |
| agamotto | Ahhh, check also to see that in your general settings, that you don't have more than 2 processes allowed | 21:25 |
| agamotto | What kind of cpu? | 21:26 |
| MythbuntuGuest37 | P4 | 21:26 |
| MythbuntuGuest37 | was fine on 7 | 21:26 |
| agamotto | Ok, what speed? | 21:26 |
| MythbuntuGuest37 | 3ghz | 21:26 |
| MythbuntuGuest37 | very nice shuttle box | 21:26 |
| agamotto | Ahh, that should be fine... Just check your general settings for 2 processes at a time or less | 21:27 |
| MythbuntuGuest37 | hmmm i will | 21:27 |
| MythbuntuGuest37 | what about front end crashing? | 21:27 |
| agamotto | I forget where exactly, but in the section where the CPU +, ++, stuff is, turn it back to CPU just to see what happens | 21:27 |
| MythbuntuGuest37 | i have read so much on forums so many people say differant stuff | 21:27 |
| MythbuntuGuest37 | thanks i did change it | 21:28 |
| agamotto | I am not sure of the front end crashing as I get it on both of my boxen with certain circumstances | 21:28 |
| MythbuntuGuest37 | cant remember to what | 21:28 |
| MythbuntuGuest37 | it ran so fine under gutsy | 21:28 |
| agamotto | I know that I don't dare run Miro on the box whilst watching telly, bad things happen to the front end | 21:28 |
| MythbuntuGuest37 | Miro? | 21:29 |
| agamotto | Yah, upgrades aren't always improvements at first... ask a Vista user | 21:29 |
| MythbuntuGuest37 | he he | 21:29 |
| agamotto | Miro is a program for net telly... podcasts, etc... | 21:29 |
| MythbuntuGuest37 | yeah they are scrapping it now | 21:29 |
| MythbuntuGuest37 | vista i meen | 21:29 |
| MythbuntuGuest37 | windows 7 now | 21:29 |
| agamotto | Whichever, I stopped at XP and only keep it around for games | 21:30 |
| MythbuntuGuest37 | true | 21:30 |
| agamotto | Alowishus: Any ideas as to a guide for my question? | 21:30 |
| MythbuntuGuest37 | what your question? | 21:30 |
| Alowishus | agamotto: wait what was your question? Are you somehow having trouble setting up the two tuners and/or listing sources? | 21:31 |
| agamotto | Yah | 21:31 |
| MythbuntuGuest37 | i got a dual tuner | 21:31 |
| MythbuntuGuest37 | NOVA-T 500 | 21:31 |
| MythbuntuGuest37 | works very well | 21:32 |
| agamotto | I have one box with a pvr 150 tuner, and have added a HVR-1800. Current mythbuntu finds digital card, not sure how to set it up | 21:32 |
| MythbuntuGuest37 | hmm seen alot about PVR 150 | 21:32 |
| agamotto | pvr-150 works fine, is connected to cable. I want to use the digital card for over-the-air stations, as it will be connected to a HDTV | 21:33 |
| MythbuntuGuest37 | I was realy bad I bought the card as I saw lots of support for it | 21:33 |
| agamotto | The 150 was the only card that would work back when I first made this box ~ 3 years ago | 21:33 |
| MythbuntuGuest37 | oooh long time | 21:34 |
| Alowishus | agamotto: sure, so create a SD lineup for the digital OTA stations in your area | 21:34 |
| Alowishus | agamotto: then connect it to the digital card | 21:34 |
| MythbuntuGuest37 | im very new to linux | 21:34 |
| lanuser | Where can I specify a card and tuner number for a TV card that's not quite recognized? | 21:34 |
| MythbuntuGuest37 | but i am proud of what i have done | 21:34 |
| agamotto | Guest37: That is ok, you have to start somewhere... so far you are doing well with intelligent questions | 21:35 |
| MythbuntuGuest37 | he he | 21:35 |
| agamotto | So you can have two different lineups with SD? | 21:35 |
| MythbuntuGuest37 | wish i didnt upgrade it though | 21:35 |
| MythbuntuGuest37 | got acpi working so nice | 21:35 |
| agamotto | lanuser: What video card? | 21:35 |
| lanuser | Hauppauge WinTV [card=10, tuner=2] | 21:36 |
| agamotto | What model? | 21:36 |
| agamotto | 150, 300, 1800, 1200? | 21:36 |
| lanuser | much older than those | 21:37 |
| agamotto | can you give me a clue as to model #? | 21:37 |
| lanuser | I'll try to post it --> http://www.pastebin.ca/1000880 | 21:38 |
| lanuser | I think it got the card type right but not the tuner? | 21:39 |
| lanuser | dmesg says "[ 32.146741] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])" | 21:39 |
| MythbuntuGuest37 | agamotto thanks for the info | 21:40 |
| MythbuntuGuest37 | im off to try things | 21:40 |
| agamotto | Ok, it is a bt848 card.... search google for 'ivtv tuner option' | 21:40 |
| agamotto | I think you need to add something like the following to your /etc/mythtv/modules.conf | 21:40 |
| agamotto | ivtv options tuner=50 that or it is 2 | 21:41 |
| agamotto | This manually sets your tuner type, as ivtv sometimes doesn't know which card it has | 21:41 |
| lanuser | I thought it was a bt878 | 21:41 |
| agamotto | Guest37: You are welcome | 21:41 |
| psicobra | hi guys i am trying to copy my avi's to my mythbuntu box where do i copy them so myth tv will see them? | 21:41 |
| lanuser | Is there a modules.conf file somewhere where I could speficy the tuner # ? | 21:41 |
| MythbuntuGuest37 | there is a share | 21:41 |
| agamotto | lanuser: Yah, that is the driver that ivtv is trying to use, which sounds correct | 21:42 |
| MythbuntuGuest37 | psicobra did you browse to box or try run \\mythtv or what ever your bax is called | 21:42 |
| MythbuntuGuest37 | *box | 21:42 |
| * agamotto points lanuser to the line with /etc/mythtv/modules.conf | 21:42 | |
| psicobra | i launch mythtv from start menu i have an external drive with avi movies on it | 21:43 |
| psicobra | just want to copy to media center box | 21:43 |
| lanuser | agamotto: thanks, that file doesn't exist in 8.04, but I could just safely create it? | 21:44 |
| agamotto | Hmmm, something like cp /mnt/usb0 to /var/mythtv/videos/ should work for that... have to check your exact settings | 21:44 |
| agamotto | lanuser: Yep, go ahead and add it | 21:44 |
| agamotto | lanuser: You might need to do sudo nano /etc/mythtv/modules.conf | 21:44 |
| agamotto | You might even get mytharchive to import the files... not sure | 21:45 |
| agamotto | I haven't played with bringing stuff in from other devices that much | 21:45 |
| lanuser | agamotto I'm root already but that file doesn't exist | 21:46 |
| psicobra | mytharchive? | 21:48 |
| agamotto | Yah, you will want to use a text editor to create it | 21:48 |
| agamotto | psicobra: It is the new way to burn DVDs, backup your settings, etc... | 21:49 |
| agamotto | I believe there is a way to use MythArchive to import video/data files | 21:49 |
| agamotto | lanuser: Hence, sudo nano /etc/mythtv/modules.conf | 21:50 |
| lanuser | agamotto: ok sorry, I just wasn't clear on if the file should already exist or not, thanks | 21:50 |
| agamotto | That is ok, always better to ask | 21:51 |
| TazgodX | sooo, i have a serial IR blaster. and i set it up in mythbuntu control center, but it wo'nt change channels. do i have to manually enter an external channel change command in mythtv backend setup? | 21:51 |
| agamotto | TazgodX: Yep, it looks like you are one of the few who has to manually add it.... | 21:52 |
| agamotto | TazgodX: What is the device you are trying to control with it? | 21:52 |
| psicobra | done it path was set wrong | 21:52 |
| psicobra | thanks guys | 21:52 |
| TazgodX | a motorola U-Verse STB | 21:52 |
| agamotto | Hmmm, USB or Firewire? | 21:53 |
| TazgodX | it has USB, but its not activated | 21:53 |
| TazgodX | no firewire | 21:53 |
| agamotto | Hmmm, call ATT and see if they can activate it... with USB, I think it will do the changing automatically | 21:53 |
| agamotto | If not, explain to them how they could be losing a customer over it | 21:54 |
| agamotto | Do a google search for the following: Motorola XXX set-top box mythbuntu irblaster | 21:54 |
| agamotto | How is the U-verse stuff otherwise? | 21:54 |
| TazgodX | its nice | 21:55 |
| TazgodX | just wish i could get it working with my mythbox | 21:55 |
| agamotto | I can understand that. I keep emailing ATT wanting to know when they are bringing it to the Moline, IL. area.... | 21:56 |
| agamotto | I am tired of being teased by the mail flyers.... | 21:56 |
| TazgodX | im in Hanover Park IL | 21:56 |
| TazgodX | just came out | 21:56 |
| agamotto | Feh... figures Chitown first.... | 21:56 |
| chairman | I need help with vnc. I have reconfigured it, but I can't connect to the vnc server. and I can't see it running when I take ps aux | grep vnc | 21:56 |
| TazgodX | haha | 21:57 |
| TazgodX | actually its not out in the city | 21:57 |
| TazgodX | just the burbs of the city | 21:57 |
| TazgodX | :) | 21:57 |
| agamotto | Ahhh, they are going for the snooty neighbors first.... grrr | 21:57 |
| [diablo] | evening all | 21:57 |
| [diablo] | guys does anyone know which script needs to be executed please to prep the backend mysql db? | 21:58 |
| [diablo] | I don't know why, but it has not created the myth db in mysql | 21:58 |
| agamotto | mythfilldatabase? | 21:58 |
| TazgodX | hmm, nothing on google about my box | 21:58 |
| agamotto | TazgodX: darn | 21:58 |
| [diablo] | agamotto, nope it gives an error saying it can't connect to mysql | 21:58 |
| [diablo] | agamotto, however I can login to mysql with root and password | 21:59 |
| agamotto | Now that is odd | 21:59 |
| TazgodX | well, imma have to play with this more later. too much work on this lately | 21:59 |
| agamotto | I haven't heard of that | 21:59 |
| TazgodX | but i finally got audio and video to work :) | 21:59 |
| agamotto | TazgodX: Yah, I know the feeling well | 22:00 |
| agamotto | Funny how work gets in the way? | 22:00 |
| TazgodX | ive been working on this for so many days, but hours wise not too long....too much work latly | 22:01 |
| [diablo] | ah ok | 22:01 |
| [diablo] | done it by hand | 22:02 |
| [diablo] | mc.sql | 22:02 |
| [diablo] | now backend is configuring ... | 22:02 |
| [diablo] | bbiam | 22:02 |
| psicobra | wow i always heard myth tv was good but it blows windows MCE out the water | 22:04 |
| psicobra | the video feature where it retreived the IMDB data | 22:04 |
| psicobra | wow | 22:04 |
| * agamotto smiles | 22:04 | |
| agamotto | It makes MCE look like a bad vcr | 22:04 |
| psicobra | true | 22:04 |
| psicobra | and the tv card i have is a bag of Sh1t under windows | 22:05 |
| psicobra | linux makes it work like a dream | 22:05 |
| psicobra | thank u mythtv and mythbuntu team | 22:06 |
| agamotto | If I disappear, I will return quickly... testing bits | 22:09 |
| agamotto | Yep, that confirms it.. some sort of resize problem with Xchat... ok | 22:11 |
| agamotto | Alowishus: I went ahead and posted to the Mythbuntu forum about my combined tuner bits... | 22:12 |
| Alowishus | agamotto: ah ok... you figured out how to do a second lineup in SD yes? | 22:13 |
| agamotto | Yes, but still not sure about the tuner setup, etc... | 22:13 |
| Alowishus | I only know what I went through for my HDHomeRun and my PVR-150's... the forums should know more specifics for your 1800 | 22:13 |
| agamotto | As an aside, has anyone played with the the encoding options when recording telly.. the mpeg ps, ts, dvd... stuff? | 22:14 |
| agamotto | Alowishus: I might do the HomeRun once the conversion is 'complete' | 22:14 |
| agamotto | I just don't have a way to hook anything up with ethernet in this house... next one will be solving those problems | 22:15 |
| agamotto | I love older homes, but trying to do rewiring without destroying the plaster....grrr | 22:16 |
| agamotto | Well, I must away... I will chat with you all some other time... | 22:25 |
| * agamotto waves | 22:25 | |
| dedi | i just through my dvb-c card in my linux box, got it running with myth, but it seems the cabel signal is realy bad. i had no problems on my windows box | 23:21 |
| filthpig | hi, does anyone know if Technotrend Budget C-1501 is supported in linux? I know the 1500 was, but that's discontinued... Couldn't find anything in google on it | 23:39 |
| MythbuntuGuest44 | hello | 23:51 |
| MythbuntuGuest44 | anybody with an hvr-1300 over here ? | 23:52 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!