Buckaboobob | anyone around to answer a DVB-S tuning question? | 02:28 |
---|---|---|
MythbuntuGuest63 | Hi anyone been able to get a snapstream remote to work? | 03:32 |
seared | howdy. I just installed 8.04 fresh, and the kernel metapackage, but I can't even get through make xconfig/menuconfig. Any idea where to look? | 05:14 |
Jinxed- | I am interested in setting up a media server where I can stream my music and compressed videos. I would like to be able to access these from remote sites. I also want to be able to watch the movies and play music in different rooms in my house. Is there a way to do this with Ubuntu? I had heard some people mention MythTv and Jinzora, has anyone had any experience with either of these? | 05:22 |
rhpot1991 | Jinxed-: mythtv is made up of a backend and a frontend, multiple FE's can access a BE, and then there are things like mythweb that would let you stream some content over the interweb | 05:47 |
rhpot1991 | so with the right setup you could accomplish much of what you want with mythtv | 05:47 |
juice | anyone know how to get an imon ultrabay to work on ubuntu 8.04? | 05:55 |
MythbuntuGuest26 | Hey, i'm looking for help trying to set up LIRC.... any ideas? | 06:00 |
juice | so i just upgraded ubuntu from 7.10 to 8.04 and i want to put mythtv on it. i have an ADS HDTV tv tuner card too. (not installed). what should i do first? | 06:11 |
Balachmar | Hi, can I take the database and recordings with me from a feisty fawn+ mythtv installation to a brand new mythbuntu install? | 06:24 |
Vinconzo | hi | 11:37 |
Vinconzo | hold on | 11:38 |
Vinconzo | brb | 11:38 |
vinconzo | and back again | 11:40 |
vinconzo | ok | 11:40 |
vinconzo | can mythbuntu auto-configure my monitors? | 11:40 |
vinconzo | for example, if i install it on a normal VGA Monitor, can i afterwards still use it on a composite TV? | 11:41 |
vinconzo | or a DVI tv? | 11:41 |
hugolp | vinconzo: yes | 11:42 |
vinconzo | ok | 11:42 |
vinconzo | becouse i had normal ubuntu on another pc, and it totally didnt work there | 11:42 |
hugolp | mmm then you may have problems | 11:42 |
vinconzo | it's got an nvidea geforce2 videocard, is that a problem? | 11:43 |
hugolp | what video card you have? | 11:43 |
hugolp | vinconzo: it shouldnt | 11:43 |
vinconzo | ok | 11:43 |
vinconzo | thanks a lot | 11:43 |
vinconzo | mythtv is easy to use , right? | 11:43 |
hugolp | well, I have been using it for a year and a half. Before I had never used linux before and I set it up | 11:44 |
vinconzo | according to the screenshotsthey really are | 11:44 |
vinconzo | ok | 11:44 |
hugolp | yes, mythtv is really easy to use | 11:44 |
vinconzo | nice | 11:44 |
hugolp | the only problem you can have is problems with linux drivers. But if you check in the internet before buying hardware and make sure the hardware you buy is suported, you wont have any problem | 11:45 |
vinconzo | well, ill see how it goes, i think | 11:45 |
vinconzo | it's pretty standard stuff | 11:45 |
vinconzo | i got it for free from a guy @ church | 11:45 |
vinconzo | so ill download mythbuntu then | 11:46 |
hugolp | from church? the place where they explain the stories? | 11:46 |
hugolp | thats the last place I would think I could get a computer from | 11:46 |
vinconzo | aw well | 11:47 |
vinconzo | im in a pretty neat church | 11:47 |
hugolp | it seems so | 11:47 |
vinconzo | they dont really forbid things, like the catholics like to do | 11:47 |
hugolp | vinconzo: I would say now linux is easier to use than windows if you dont find any drivers problems, and mythtv is one of the easier to use software for linux | 11:48 |
hugolp | so you should be fine | 11:48 |
vinconzo | they allow gays, condoms, drinking and even pot smoking (im dutch) | 11:48 |
vinconzo | as long as i dont get an addiction, becouse then it would be a (? dont know the english word) | 11:49 |
vinconzo | well like a fake god | 11:49 |
vinconzo | becouse you need that addiction :) | 11:50 |
hugolp | that sounds even fun | 11:50 |
vinconzo | but im off to download | 11:50 |
vinconzo | but the 10 commandements remain there though | 11:50 |
vinconzo | but thats mostly laws everdybody pretty mucht uses | 11:50 |
vinconzo | eg dont kill dont steal, etc. | 11:51 |
hugolp | of course | 11:52 |
vinconzo | ah its downloading | 11:56 |
vinconzo | btw | 11:57 |
vinconzo | is it also possible to stop mythtv at some point, and play MAME, or some other game? | 11:58 |
vinconzo | w8 nm | 12:00 |
hugolp | vinconzo: I dont use mythgames, but if MAME is an outside program, mythtv is like any other linux program and alt+tab works | 12:13 |
hugolp | I have mytht on the backgroun watching tv ritgh now while im talking with you | 12:14 |
mandje | there's no wubi install for mythbuntu? | 12:23 |
crazy_bus | should I follow this guide https://help.ubuntu.com/community/MythTV_Gutsy_Backend_Frontend_Desktop even though I'm using kubuntu hardy? | 12:34 |
rockhound | hi everyone. I am struggling with spdif output on an alc888 onboard chip .. it works with max audio channels set to stereo ... but as soon as I would like to pass-through something or set max audio channels to 5.1 all goes quite ... | 12:36 |
rockhound | any suggestions for this issue? | 12:36 |
wild_oscar | hi there | 12:51 |
wild_oscar | is there an irc channel for support with lirc? | 12:51 |
crazy_bus | wild_oscar: there's lirc but there's only one person in it | 13:01 |
wild_oscar | yes, so I've seen | 13:03 |
cosmic_ | hi @ all | 13:42 |
cosmic_ | I cant switch to LiveTV , log Error : http://ubuntuusers.de/paste/212887/ | 13:43 |
cosmic_ | Could anyone give me a hint , how such an error can happen ? i think that i have to manipulate the sql DB , rigtht ? | 13:44 |
bazzawill_eee | hmm not sure you might want to try repairing db in mythweb | 13:46 |
bazzawill_eee | have you tried rebooting? | 13:46 |
cosmic_ | yes , i tried both | 13:48 |
cosmic_ | repair and reboot | 13:48 |
cosmic_ | i just wonder how he got this DATE of the past !?!? | 13:48 |
bazzawill_eee | ah didn't notice that check date in a terminal | 13:50 |
cosmic_ | everything is working fine .... i really dont understand | 13:52 |
crazy_bus | Mythbuntu control centre is downloading additional package file. At no time has it told me what these are. Is there anyway to find out? | 14:44 |
rockhound | what exactly does the 5.1 max audio selection do? | 14:45 |
laga | crazy_bus: it's displaying what it's downloading, right? | 14:47 |
crazy_bus | laga: no, it just says downloading file 5 of 24 at xkB/s | 14:48 |
crazy_bus | laga: I just installed mythbuntu-desktop like the guide said (even though I don't want xfce) so I have no idea what else mythbuntu control centre wants | 14:49 |
laga | crazy_bus: oh. it's probably just updating the package index then. unless it's displaying package names of course :) | 14:50 |
crazy_bus | laga: what does it need to download for the package index (it's being downloading something for a while now) | 14:53 |
laga | well, it downloads a list of packages available on the mirrors. | 14:54 |
crazy_bus | laga: is this a separate package list to apt-get? | 14:56 |
laga | no | 14:56 |
crazy_bus | laga: why is it getting them in the mythbuntu control centre bar instead of the usual synaptic or adept? | 14:57 |
rockhound | when I enable 5.1 max audio, all audio is gone via spdif coax | 14:58 |
laga | crazy_bus: why not? ;) it uses the python apt bindings to do all the work. | 14:59 |
crazy_bus | laga: it doesn't matter much. But it's annoying for it to redownload every package list file and not tell you what exactly it's downloading. | 15:03 |
laga | let me check | 15:05 |
laga | what exactly did you do to get it to download stuff? | 15:06 |
crazy_bus | installed mythbuntu-desktop from this guide https://help.ubuntu.com/community/MythTV_Gutsy_Backend_Frontend_Desktop Then selected primarybackend, frontend, and kubuntudesktop was already installed. Then I hit apply | 15:08 |
Jinxed- | MythTv-- can I set it up to experiment with and still use my computer as normal, and can I easily uninstall if I wanted to? | 15:54 |
* Penfold hrms. Okay. Why is my PVR150 not behaving? :) I get white flyback lines on black, despite the fact that v4c2-ctl reckons I'm listening on composite 1 (same on 2). | 16:16 | |
Penfold | v4l2-ctl, even | 16:16 |
laga | flyback lines? | 16:16 |
laga | maybe you've got an issue with ground hum | 16:17 |
Penfold | and no picture, otherwise. | 16:17 |
* Penfold is starting to suspect that the SCART to composite lead he has doesn't work. | 16:18 | |
crazy_bus | I followed the installation guide. But I'm not sure how to scan for channels. Channel scanner in channel editor is greyed out | 16:23 |
Jinxed- | Can someone help me get MythTv running? | 16:26 |
cosmic_ | Jinxed-: wheres your problem ? | 16:26 |
Jinxed- | Well I don't know where to start... I started with the doumentation | 16:26 |
Jinxed- | and it just took me to a mythbuntu download page | 16:26 |
Jinxed- | to start with I don't know if I should upgrade to 8.04 | 16:27 |
Jinxed- | from 7.10 | 16:27 |
Jinxed- | or does it matter | 16:27 |
Jinxed- | or is mythbuntu a completly different os, | 16:27 |
cosmic_ | different to what ? | 16:27 |
Jinxed- | then ubuntu | 16:27 |
cosmic_ | no , its not | 16:28 |
Jinxed- | I want MythWeb | 16:28 |
cosmic_ | ok | 16:28 |
Jinxed- | basically so I can have movies/music remotly | 16:28 |
Jinxed- | when I am on the road | 16:28 |
Jinxed- | I don't even have a tv tuner | 16:28 |
cosmic_ | ??? | 16:28 |
Jinxed- | maybe I would get one eventually but right now I just want a media server | 16:28 |
cosmic_ | you just want video and music for streaming ??? | 16:29 |
Jinxed- | I mean I don't have the stuff for the dvr part of myth tv | 16:29 |
Jinxed- | I just want to be able to acess my compress movies and music | 16:29 |
Jinxed- | and stream them | 16:29 |
Jinxed- | remotly | 16:29 |
cosmic_ | sudo apt-get install gnump3d | 16:29 |
Jinxed- | I take it mythtv isn't for me? | 16:30 |
cosmic_ | gnump3d is a streaming server , mythtv isnt meant for that what you want at the mom | 16:31 |
Jinxed- | alright | 16:31 |
Jinxed- | you ever hear of jinzora? | 16:31 |
cosmic_ | mom plz | 16:31 |
cosmic_ | yes i heard about it | 16:32 |
cosmic_ | whats with it ? | 16:33 |
cosmic_ | gnump3d is more rudimently | 16:33 |
Jinxed- | hmm | 16:33 |
Jinxed- | So I did the apt-get ... now what lol | 16:34 |
cosmic_ | but it does everything i need , to hear my music everywhere i want | 16:34 |
cosmic_ | vi /etc/gnum3d/*.conf | 16:34 |
cosmic_ | wait .... i have to look after the name of the config file | 16:34 |
cosmic_ | what a suprise ! ;) | 16:35 |
Jinxed- | lol | 16:35 |
cosmic_ | /etc/gnump3d/gnump3d.conf | 16:35 |
cosmic_ | now configure it ... Port = XX , hostname = XXXXX.XX , Music and Vid Dir = /foo/bar | 16:36 |
cosmic_ | ok ? | 16:36 |
Jinxed- | hmm | 16:36 |
Jinxed- | this is my first time doing anything like this... I don't know what you mean | 16:37 |
cosmic_ | ok | 16:37 |
cosmic_ | where is your server ? at home ? | 16:37 |
Jinxed- | well I need to get one running | 16:37 |
cosmic_ | ??? | 16:38 |
Jinxed- | I wanted to start off getting a server going at home | 16:38 |
cosmic_ | ok , fine | 16:38 |
Jinxed- | I thought that was what gnump3d was | 16:38 |
Jinxed- | was a server | 16:38 |
Jinxed- | well to make your computer into a server | 16:38 |
cosmic_ | your computer is an SERVER as long as he serves a service :) | 16:39 |
Jinxed- | ha | 16:39 |
cosmic_ | open the file /etc/gnump3d/gnump3d.conf | 16:39 |
cosmic_ | with a texteditor of your choice | 16:39 |
crazy_bus | I followed the installation guide. But I'm not sure how to scan for channels. Channel scanner in channel editor is greyed out | 16:39 |
cosmic_ | you have to be privileged as root | 16:39 |
cosmic_ | crazy_bus: no tv tuner installed or no binding | 16:40 |
crazy_bus | cosmic_ the tv tuner is I think set up. It works in other programs and it seems to be detected in mythtv setup. I don't know what binding is | 16:41 |
cosmic_ | tell me al the points wich are listet in mythtv-setup | 16:42 |
cosmic_ | i just know the german words for it | 16:42 |
cosmic_ | by the way ..sorry for my englisch guys | 16:42 |
Jinxed- | its fine | 16:42 |
cosmic_ | Jinxed-: did you open it ? | 16:42 |
Jinxed- | yeah | 16:42 |
Jinxed- | I have the conf file open | 16:42 |
cosmic_ | read trough it and search for a point , where you have to give the location of the "MUSIC-Directory" | 16:43 |
cosmic_ | tell me al the points wich are listet in mythtv-setup @ crazy_bus | 16:44 |
crazy_bus | cosmic_ in capture card settings? | 16:45 |
cosmic_ | no , in the main menu | 16:45 |
cosmic_ | @ crazy_bus | 16:46 |
crazy_bus | cosmic_ 1. General 2. Capture cards 3. Video sources 4. Input connections 5. Channel editor 6. Storage directory | 16:46 |
cosmic_ | do you have edited 4. Input connections ??? | 16:47 |
cosmic_ | and 3. Video sources | 16:47 |
Jinxed- | hmm I am unable to mount my external drive to tranfer the music | 16:47 |
Jinxed- | shit I think it is formated NTFS | 16:48 |
Jinxed- | is there anyway to get the music off it? | 16:48 |
cosmic_ | yes | 16:48 |
cosmic_ | there is always a way in Ubuntu | 16:48 |
cosmic_ | but i hope we want make the chann admins angry because thes theme is absolut OFF-TOPIC ;) | 16:49 |
cosmic_ | i'l back in some secs | 16:49 |
Jinxed- | alright | 16:49 |
crazy_bus | cosmic_ I edited those both again and now it's ungreyed | 16:49 |
tgm4883_laptop | IIRC, NTFS drives should auto mount in hardy | 16:50 |
crazy_bus | is there meant to be a mouse cursor. As mine is invisible in mythtv except when hovering over text input boxes | 16:50 |
cosmic_ | crazy_bus: now good luck , by scanning | 16:51 |
cosmic_ | crazy_bus: mouse ?? , i think you can select deactivate MOUSE in the GENERAL Menu | 16:51 |
cosmic_ | Jinxed-: give me a paste of your dmesg | 16:53 |
crazy_bus | cosmic_I'm just wondering about setup. As it's hard to select things when you cant see the mouse | 16:53 |
Jinxed- | cosmic_, do you recommend that I upgrade to hardy before doing much more? | 16:53 |
cosmic_ | crazy_bus: it is easy when you use your keyboard | UP and Down Arrows for next or prev | 16:54 |
tgm4883_laptop | crazy_bus, the mouse should be hidden | 16:54 |
Jinxed- | cosmic_, I will be back soon. I am upgrading to hardy heron | 16:54 |
cosmic_ | Jinxed-: i dont recommend , because support hasnt ended yet , only if you have known bugs , witch are disturbing you | 16:55 |
Jinxed- | oh | 16:55 |
Jinxed- | alright | 16:55 |
Jinxed- | what is a dmesg then | 16:55 |
cosmic_ | but your free | 16:55 |
Jinxed- | dmesg then | 16:55 |
cosmic_ | oh | 16:55 |
cosmic_ | i see | 16:55 |
cosmic_ | open a terminal | 16:55 |
Jinxed- | k | 16:55 |
cosmic_ | APLICATIOS - Tools - Terminal | 16:56 |
Jinxed- | have it open | 16:56 |
cosmic_ | i hope thats what you read in an english version | 16:56 |
cosmic_ | ok | 16:56 |
cosmic_ | now max the window | 16:56 |
cosmic_ | oh by the way , dont now anymore .. can you read from your external device ... or didnt even mount work ? | 16:57 |
Jinxed- | I couldn't get it to work | 16:58 |
cosmic_ | ok | 16:58 |
cosmic_ | now type DMESG in your terminal but in lower case | 16:58 |
Jinxed- | http://paste.ubuntu.com/11440/ | 16:58 |
cosmic_ | did you unplug it ? | 16:59 |
Jinxed- | I turned it off | 16:59 |
cosmic_ | plug it in , turn it on | 17:00 |
Jinxed- | alright | 17:00 |
cosmic_ | and then crate a directory in /media | 17:00 |
cosmic_ | for example | 17:00 |
cosmic_ | sudo mkdir /media/extern | 17:00 |
Jinxed- | ok | 17:01 |
Jinxed- | done | 17:01 |
cosmic_ | sudo chown YOURuSERnAME:users /media/extern | 17:02 |
Jinxed- | done | 17:02 |
cosmic_ | sudo mount -t ntfs /dev/sdb1 /media/extern | 17:03 |
Jinxed- | $LogFile indicates unclean shutdown (0, 0) | 17:03 |
Jinxed- | Failed to mount '/dev/sdb1': Operation not supported | 17:03 |
Jinxed- | Mount is denied because NTFS is marked to be in use. Choose one action: | 17:03 |
Jinxed- | Choice 1: If you have Windows then disconnect the external devices by | 17:03 |
Jinxed- | clicking on the 'Safely Remove Hardware' icon in the Windows | 17:03 |
Jinxed- | taskbar then shutdown Windows cleanly. | 17:03 |
Jinxed- | Choice 2: If you don't have Windows then you can use the 'force' option for | 17:03 |
Jinxed- | your own responsibility. For example type on the command line: | 17:03 |
Jinxed- | mount -t ntfs-3g /dev/sdb1 /media/extern -o force | 17:03 |
Jinxed- | Or add the option to the relevant row in the /etc/fstab file: | 17:03 |
Jinxed- | /dev/sdb1 /media/extern ntfs-3g defaults,force 0 0 | 17:03 |
cosmic_ | PLEASE use NO-PASTEbin SERVICES !!!!!!! | 17:04 |
Jinxed- | sorry | 17:04 |
cosmic_ | np | 17:04 |
cosmic_ | paste me the output of : mount | 17:05 |
cosmic_ | you see every device witch is mounted yet | 17:05 |
cosmic_ | is the device sdb1 in the output ? | 17:06 |
Jinxed- | http://paste.ubuntu.com/11443/ | 17:07 |
Jinxed- | I am not sure what you are asking | 17:07 |
cosmic_ | hmn | 17:09 |
cosmic_ | I dont know this Error message of mount | 17:09 |
cosmic_ | try Choice 2 | 17:09 |
cosmic_ | how long do you use Linux Jinxed- | 17:10 |
Jinxed- | well we had to do all our programming in redhat at school | 17:10 |
Jinxed- | but I know windows better | 17:10 |
Jinxed- | everything was already configured | 17:10 |
Jinxed- | at school | 17:10 |
cosmic_ | np | 17:11 |
Jinxed- | alright | 17:11 |
cosmic_ | but you have to read more about linux ... | 17:11 |
Jinxed- | mounted the harddrive | 17:11 |
Jinxed- | ! | 17:11 |
Jinxed- | where at? | 17:11 |
cosmic_ | look into the output of : mount | 17:11 |
cosmic_ | its alwys : DEVICE on MOUNPOINT | 17:11 |
cosmic_ | sdb1 is the 1 partition of device sdb | 17:12 |
Jinxed- | should I put my music in /var/music | 17:12 |
cosmic_ | you can .. but you dont must | 17:12 |
cosmic_ | you dont have too | 17:12 |
cosmic_ | your free | 17:12 |
Jinxed- | haha alright | 17:13 |
cosmic_ | hi crazy_bus | 17:13 |
Jinxed- | when I try to copy my music it says error | 17:13 |
Jinxed- | you don't have permission | 17:14 |
cosmic_ | error ? | 17:14 |
cosmic_ | sudo chown -R YourUserName:users /media/extern | 17:14 |
Jinxed- | nevermind I am just putting it in a different folder | 17:15 |
crazy_bus | hi cosmic_ didn't mean to leave, I shut the wrong window | 17:15 |
cosmic_ | crazy_bus: you dont have to say sorry to me | 17:16 |
crazy_bus | I just wish my remote would work properly. Volume and the number buttons work as well as play/pause. (using a kde program) but the other keys don't work and I'm having difficulty knowing what to do in mythtv | 17:17 |
cosmic_ | dont know the right english words for what i mean , sorry | 17:17 |
cosmic_ | crazy_bus: i dont know how to manipulate the key functions , i just use lirc | 17:18 |
crazy_bus | maybe my device isn't lirc compatible | 17:19 |
cosmic_ | did you try ? | 17:19 |
Jinxed- | ok i put a couple gigs worth in... enough to get a server running | 17:19 |
cosmic_ | or google for it ? | 17:19 |
cosmic_ | Jinxed-: SORRY but , would you be so kind to explain "i put a couple gigs worth in..." , plz | 17:20 |
crazy_bus | cosmic_ it's a avermedia tv card, which I selected. And it didn't give me any errors. But all of the buttons still aren't working | 17:20 |
cosmic_ | explain in other words ! | 17:20 |
cosmic_ | crazy_bus: where did you select them ? | 17:21 |
Jinxed- | cosmic_, I just put a few gigs of music into the music folder so I have some music now | 17:22 |
cosmic_ | Jinxed-: Do you have your Music local ? | 17:22 |
crazy_bus | cosmic_ I selected it from the list in mythbuntu control centre | 17:22 |
Jinxed- | I put it in the main folder/music | 17:22 |
cosmic_ | ok, crazy_bus : try $irrecord ..... Jinxed- : go back to your gnump3d.conf | 17:23 |
cosmic_ | Jinxed-: search for the value to change to your music folder | 17:24 |
Jinxed- | /home/kyle/Music | 17:24 |
cosmic_ | did you change it in gnump3d.conf | 17:26 |
Jinxed- | yeah | 17:26 |
Jinxed- | and I loaded amarok | 17:26 |
cosmic_ | thers a point : port = 8888 | 17:27 |
Jinxed- | yeah | 17:27 |
cosmic_ | change the value to a port you are able to a port of your choice or leave it and REMEMBER it | 17:27 |
Jinxed- | can I change it to 1234? | 17:28 |
cosmic_ | change the value to a port Number of your choice or leave it and REMEMBER it | 17:28 |
Jinxed- | ok | 17:29 |
Jinxed- | remembered | 17:29 |
cosmic_ | ok | 17:29 |
cosmic_ | mom | 17:29 |
cosmic_ | the point : binding_host = | 17:29 |
Jinxed- | yeah | 17:30 |
cosmic_ | there has to be an uncommented "binding_host=IPAdressOfYourServer" | 17:30 |
Jinxed- | #=comment? | 17:30 |
cosmic_ | do you have a second PC in your Network ? | 17:30 |
Jinxed- | yeah | 17:30 |
Jinxed- | multiple | 17:30 |
cosmic_ | yes # = comment | 17:30 |
Jinxed- | ok saved | 17:31 |
Jinxed- | with my ip address | 17:31 |
cosmic_ | mom , there is something with security | 17:32 |
cosmic_ | i have to go to toilette to recycle my BEER ! ;) | 17:32 |
Jinxed- | haha | 17:33 |
Jinxed- | alright | 17:33 |
crazy_bus | can't get irrecord to work | 17:33 |
Jinxed- | crazy_bus, he went to go pee | 17:33 |
cosmic_ | I LOVE German BEER ;) | 17:34 |
cosmic_ | so | 17:34 |
cosmic_ | Jinxed-: in your music directory must be a file called .password | 17:35 |
crazy_bus | irrecord: could not init hardware (lircd running ? --> close it, check permissions) | 17:35 |
cosmic_ | create it and type : USERNAME:PASSWORD:x | 17:35 |
cosmic_ | crazy_bus: is lirc running ? | 17:35 |
cosmic_ | no! | 17:36 |
cosmic_ | get it run | 17:36 |
cosmic_ | :) | 17:36 |
cosmic_ | crazy_bus: give me the name of your remote unit | 17:36 |
cosmic_ | see dmesg | 17:36 |
Jinxed- | cosmic_, I am not finding the password file | 17:37 |
Jinxed- | ohhhh do i have to make the file? | 17:37 |
cosmic_ | you have to create it | 17:37 |
crazy_bus | cosmic_it's part of this tv card [ 1549.184371] sp887x_initial_setup: firmware upload... sp887x: firmware upload complete | 17:37 |
cosmic_ | paste me your dmesg @ crazy_bus | 17:38 |
Jinxed- | so in the form: USERNAME:PASSWORD:x | 17:38 |
cosmic_ | :x ??? you mean the vi command to save !?! right !?! | 17:38 |
Jinxed- | ? | 17:39 |
Jinxed- | I don't use vi | 17:39 |
cosmic_ | in the form : USERNAME:PASSWORD | 17:39 |
Jinxed- | I use gedit | 17:39 |
Jinxed- | alright | 17:39 |
Jinxed- | makes sense | 17:39 |
Jinxed- | done | 17:39 |
crazy_bus | ah got irrecord to start by using root | 17:39 |
cosmic_ | now go to a client an run a web browser ... browse for "SERVERIP:SERVERPORT" | 17:40 |
cosmic_ | sorry, do an : sudo /etc/init.d/gnump3d restart on the server before | 17:40 |
cosmic_ | @ Jinxed- | 17:41 |
Jinxed- | huh | 17:41 |
crazy_bus | pff. | 17:41 |
cosmic_ | crazy_bus: it schould start without being root to | 17:41 |
cosmic_ | but newer mind .. | 17:41 |
cosmic_ | go ahead for the first | 17:41 |
crazy_bus | irrecord: error reading from /dev/lircd irrecord: Success Segmentation fault | 17:41 |
cosmic_ | paste me your dmesg @ crazy_bus | 17:42 |
Jinxed- | cosmic_, alright I did the sudo command now what am I supose to do in firefox? | 17:42 |
cosmic_ | http://YOURIPADRESSOFSERVER:YOURCHOOSENPORT | 17:43 |
crazy_bus | cosmic_ http://www.pastebin.ca/1014864 | 17:43 |
Jinxed- | I did that and it didn't do anything | 17:44 |
cosmic_ | [ 39.562257] input: bttv IR (card=124) as /devices/pci0000:00/0000:00:1e.0/0000:05:04.0/input/input7 | 17:44 |
cosmic_ | your using hardy right @ crazy_bus | 17:44 |
crazy_bus | cosmic_ yes | 17:44 |
cosmic_ | give me a mom crazy_bus | 17:44 |
cosmic_ | so Jinxed- what does your browser say ? | 17:45 |
Jinxed- | Server not found | 17:45 |
cosmic_ | mom | 17:46 |
cosmic_ | 2 posibilities , no network connectivity or not the right port | 17:47 |
cosmic_ | standard port of gnump3d is 8888 | 17:47 |
cosmic_ | my server listens on 192.168.0.10 | 17:47 |
cosmic_ | so i would type in firefox : 192.168.0.10:8888 | 17:48 |
Jinxed- | oh you mean local ip | 17:48 |
Jinxed- | I did like 69.209.XXX.XXX | 17:48 |
cosmic_ | your external IP ? | 17:48 |
Jinxed- | yeah | 17:48 |
cosmic_ | extern of local Area Network ? | 17:48 |
cosmic_ | Fuck | 17:48 |
cosmic_ | ;) | 17:48 |
cosmic_ | local | 17:48 |
cosmic_ | for the first ... | 17:49 |
cosmic_ | i will healp you when it works local , for final | 17:49 |
Jinxed- | so i need to change that on my conf file | 17:49 |
cosmic_ | you always have to change the conf , for doing well | 17:49 |
cosmic_ | ;) | 17:49 |
Jinxed- | haha | 17:49 |
Jinxed- | so the binding_host is my local ip? | 17:49 |
cosmic_ | jap | 17:50 |
Jinxed- | jap? | 17:50 |
cosmic_ | crazy_bus: sorry, this will take longer | 17:50 |
cosmic_ | YEAH ! | 17:50 |
cosmic_ | jap is YEAH on german slang ;) | 17:50 |
Jinxed- | how do i find my local ip | 17:51 |
cosmic_ | terminal -> type : ifconfig | 17:51 |
cosmic_ | instead of IPCNFIG | 17:51 |
cosmic_ | IPCONFIG | 17:51 |
cosmic_ | in lower case , plz | 17:52 |
Jinxed- | 192.168.2.27 ? | 17:52 |
Jinxed- | sound right | 17:52 |
cosmic_ | sounds good to me | 17:52 |
Jinxed- | ok save restart? | 17:52 |
cosmic_ | jap | 17:52 |
cosmic_ | and now go to a client | 17:53 |
cosmic_ | an enjoy STREAMING MUSIC | 17:53 |
cosmic_ | how long do you use Linux @ crazy_bus | 17:54 |
Jinxed- | haha still says unable to find server | 17:54 |
cosmic_ | WHAT ? | 17:54 |
cosmic_ | no way | 17:54 |
cosmic_ | ;) | 17:54 |
crazy_bus | cosmic_ two or so years | 17:54 |
cosmic_ | ping the IP on your client | 17:54 |
Jinxed- | when i did sudo /etc/init.d/gnump3d restart | 17:54 |
Jinxed- | it said | 17:54 |
Jinxed- | Restarting gnump3d: start-stop-daemon: warning: failed to kill 20844: No such process | 17:54 |
Jinxed- | gnump3d. | 17:54 |
cosmic_ | oh | 17:54 |
crazy_bus | *without dual boot. One and off before | 17:54 |
cosmic_ | do a : ps auxfww | grep gnump3d | 17:55 |
cosmic_ | crazy_bus: i just wanted to know | 17:55 |
cosmic_ | thx | 17:55 |
cosmic_ | you have to edit your hardware.conf | 17:55 |
cosmic_ | the driver you need is : devinput , because it seems to me to be an usb device , right ? | 17:56 |
Jinxed- | ping? | 17:56 |
cosmic_ | damn fuck , i think my english gets better by every BEER ;) | 17:56 |
cosmic_ | Jinxed-: TERMINAL -> $ping IPADRESS | 17:57 |
Jinxed- | lol | 17:57 |
cosmic_ | without $ | 17:57 |
crazy_bus | cosmic_ no it's a pci tv card with a infra red plugged into it. Kde works with some of the buttons (keyboard like ones, but not the more exotic ones) | 17:57 |
cosmic_ | do you recognize that too @ Jinxed- ? ;) | 17:57 |
cosmic_ | how did you insall lirc @ crazy_bus | 17:58 |
cosmic_ | compile | 17:58 |
cosmic_ | ?? | 17:58 |
crazy_bus | cosmic_ no though apt-get | 17:58 |
Jinxed- | umm whats going on | 17:59 |
Jinxed- | terminal is goin on | 17:59 |
cosmic_ | what do you read @ Jinxed- ? | 17:59 |
cosmic_ | whitch distro do you have @ crazy_bus | 18:00 |
Jinxed- | 64 bytes from 192.168.2.27: icmp_seq=84 ttl=64 time=0.022 ms | 18:00 |
cosmic_ | distri | 18:00 |
Jinxed- | etc | 18:00 |
crazy_bus | cosmic_ kubuntu 8.04 | 18:00 |
Jinxed- | lots of them | 18:00 |
Jinxed- | how do i get them to stop | 18:00 |
cosmic_ | you can cancel that with pressing "STRG + C" | 18:00 |
Jinxed- | 192.168.2.27 ping statistics --- | 18:01 |
Jinxed- | 127 packets transmitted, 127 received, 0% packet loss, time 125997ms | 18:01 |
cosmic_ | crazy_bus: I dondt know 8.04 so good , are there all modules installed to ? | 18:01 |
cosmic_ | too | 18:01 |
crazy_bus | cosmic_ mythbuntu modules? If so I installed mythbuntu-desktop and all its dependicies | 18:02 |
cosmic_ | i meant lirc modules, but they should have been installed with muthbuntu | 18:03 |
Jinxed- | cosmic_, http://paste.ubuntu.com/11454/ | 18:03 |
cosmic_ | Jinxed-: on Terminal do : telnet IPOFSERVER PORTNUMBER | 18:03 |
Jinxed- | when I typed gnump3d | 18:03 |
cmdln | mmm my hauppage 350 grey remote does not seem be registering | 18:04 |
crazy_bus | lirc, liblircclient, kdelirc are all installed | 18:04 |
Jinxed- | Trying 192.168.2.27... | 18:04 |
Jinxed- | telnet: Unable to connect to remote host: Connection refused | 18:04 |
cosmic_ | does gnump3d have permissions to acces this DIRECTORY ? @ Jinxed- | 18:04 |
Jinxed- | je ne sa pas | 18:04 |
Jinxed- | i don't know | 18:04 |
cosmic_ | oh | 18:05 |
cosmic_ | so know its on to you | 18:05 |
cosmic_ | check in the gnump3d.conf the user= whitsch gnump3d is running | 18:05 |
cosmic_ | is this user the owner of the gnump3d root directory or even in the group ? | 18:05 |
Jinxed- | there is only one user | 18:06 |
cosmic_ | witch one ? | 18:06 |
Jinxed- | kyle | 18:06 |
cosmic_ | crazy_bus: Is ther another package you cann install ... starting with lirc ? | 18:06 |
Jinxed- | if I give you remote acess can you figure out what your asking | 18:06 |
cosmic_ | But it will not help you ! | 18:07 |
crazy_bus | cosmic_ input lirc | 18:07 |
Jinxed- | I can see what your doing | 18:07 |
Jinxed- | and you can explain | 18:07 |
Jinxed- | I have to pee! God I love processed hot choclate | 18:07 |
cosmic_ | you have to learn by yourself , otherwse i have to help you everytime you try to make an Computer to a wonder PC ! ;) | 18:07 |
Jinxed- | lol | 18:08 |
cosmic_ | löl | 18:08 |
cosmic_ | input lirc ??? | 18:08 |
cosmic_ | thats never a package name | 18:08 |
cosmic_ | lirc-modules-source | 18:09 |
cosmic_ | thats a package name | 18:09 |
cosmic_ | :) | 18:09 |
Jinxed- | back | 18:09 |
crazy_bus | inputlirc zeroconf lirc daemon | 18:09 |
crazy_bus | /\ cosmic_ | 18:09 |
crazy_bus | cosmic_ now irrecord is working. Any chance you can guide me though it. It's 3am and my brain has stopped | 18:10 |
cosmic_ | if i try : sudo apt-get install lir and then i press double TAB , none of your package names apear | 18:10 |
cosmic_ | @ crazy_bus | 18:10 |
cosmic_ | Jinxed-: the löl was for you | 18:10 |
cosmic_ | by the way .. | 18:10 |
cosmic_ | ok | 18:10 |
laga | for the record: inputlirc is a valid package (and quite a nice one for some cases ;)) | 18:11 |
cosmic_ | so do something stupid and let gnump3d run as your user ... by editing the config file ! | 18:11 |
crazy_bus | cosmic_ http://packages.ubuntu.com/hardy/inputlirc | 18:11 |
Jinxed- | ok | 18:11 |
Jinxed- | I got the conf file open | 18:12 |
cosmic_ | i am sorry , crazy_bus , didnt see that | 18:12 |
cmdln | when I run irw and press buttons on my grey hauppage remote nothing is spit back out | 18:12 |
cosmic_ | Jinxed-: dont just open it .... read for what i am telling you | 18:12 |
crazy_bus | cosmic_ irw is spitting out the proper things. What do I do next? | 18:13 |
Jinxed- | so the part that says # user = nobody # Some comment | 18:13 |
cosmic_ | Whats the meaning of : "for the record:" ??? Could anyone explain it in other words ? | 18:13 |
cosmic_ | please | 18:14 |
Jinxed- | for the record: I want to make sure you know I said this | 18:15 |
Jinxed- | alright | 18:15 |
Jinxed- | so am i supose to uncomment out the user part and put kyle? | 18:16 |
cosmic_ | crazy_bus: COOL ,know create a ".lircrc" File for myth and mplayer in case you use that .... in format :http://paste.ubuntu.com/11457/ | 18:16 |
cosmic_ | Jinxed-: , THX | 18:16 |
cosmic_ | jap, but remember thats the bad way of configuring a service !!!!! its just for TEST !!!! | 18:17 |
cosmic_ | @ Jinxed- | 18:17 |
cosmic_ | in the World of OS , every Service should run regulary as a own user , in my oppinion | 18:18 |
Jinxed- | ok | 18:18 |
Jinxed- | did it | 18:19 |
crazy_bus | cosmic_ so I have to set every key manually in a text file? | 18:19 |
cosmic_ | laga: thanks for the hint | 18:20 |
cosmic_ | i just know it that way , sorry crazy_bus | 18:20 |
cosmic_ | Jinxed-: restart gnump3d | 18:20 |
cosmic_ | then try again | 18:21 |
Jinxed- | ok did it | 18:21 |
cosmic_ | then try again from a client | 18:22 |
Jinxed- | still onthing | 18:22 |
cosmic_ | was there a error by starting gnump3d again ? | 18:22 |
Jinxed- | yeah | 18:22 |
cosmic_ | lol | 18:22 |
cosmic_ | would you please be so kind and tell it to me ? | 18:23 |
cosmic_ | i cant see your Monitor | 18:23 |
Jinxed- | http://paste.ubuntu.com/11458/ | 18:23 |
Jinxed- | sorry had to pastebin ;) | 18:24 |
cosmic_ | np | 18:24 |
cosmic_ | give me a mom i isnatll it on my pc and try | 18:24 |
Jinxed- | lol alright | 18:25 |
crazy_bus | I'm to lazy to do it by hand. So I found this cool website to do the config for me http://lircconfig.commandir.com/ | 18:26 |
Jinxed- | hahaha i think i figured it out | 18:26 |
cosmic_ | yes ? Jinxed- | 18:27 |
crazy_bus | thanks for all your help cosmic_. I must sleep now | 18:27 |
Jinxed- | music != Music | 18:27 |
cosmic_ | crazy_bus: your welcome | 18:27 |
cosmic_ | crazy_bus: you did most of it by your own , thats cool | 18:28 |
cosmic_ | GOOD NIGHT ! | 18:28 |
crazy_bus | is mythtv constantly stealing my tv card. Because the frontend is closed. But kaffeine now won't load the tv card | 18:28 |
cosmic_ | crazy_bus: you can decide , in the mythtv.setup | 18:29 |
cosmic_ | crazy_bus: you can decide , in the mythtv-setup | 18:29 |
Jinxed- | cosmic_ woot! new problem | 18:29 |
laga | "open on demand" might break EIT scanning | 18:29 |
cosmic_ | woot ? | 18:29 |
Jinxed- | http://paste.ubuntu.com/11459/ | 18:29 |
cosmic_ | what the hell is that for a word ? | 18:29 |
Jinxed- | woot means like alright | 18:29 |
Jinxed- | sweert | 18:29 |
Jinxed- | sweet | 18:29 |
cosmic_ | lol | 18:30 |
Jinxed- | awesome | 18:30 |
cosmic_ | ok | 18:30 |
cosmic_ | you have changed the user= VALUE to your local user , and your local user hasnt got acces (write) to the directory : /var/log/gnump3d/ | 18:31 |
crazy_bus | cosmic_ ta, found the option. Now to sleep and tommorow figure out how to link xmltv for my country | 18:31 |
cosmic_ | cause of running a service with your username is stupid .... PLEASE DONT CHANGE THE RIGHTS OF THE /VAR/LOG/ DIR !!! | 18:31 |
Jinxed- | lol | 18:32 |
cosmic_ | Good LUCK crazy_bus | 18:32 |
cosmic_ | You will figure it out , i know that | 18:32 |
Jinxed- | I was just going to put the log in a different file | 18:32 |
cosmic_ | jap , thats the rigth way Jinxed- | 18:32 |
cmdln | grr | 18:32 |
cosmic_ | Dont forget running gnump3d as Kyle ... is just for testing ... OK ? | 18:33 |
cmdln | so if I cat /dev/lirc0 and press buttons i get some characters spit back. But I cant seem to get irw to give me back any registered keys | 18:33 |
cosmic_ | HEy cmdln , dont be so angry | 18:33 |
Jinxed- | any place special i should put it? | 18:34 |
cosmic_ | dont know ... /home/kyle ??? Where do you (your user name ) have qaccess | 18:34 |
cosmic_ | ?? | 18:34 |
cosmic_ | cmdln: wheres your prob ? | 18:34 |
cmdln | seems to be lirc config | 18:35 |
cosmic_ | lirc is started ? | 18:35 |
cmdln | yes | 18:35 |
cosmic_ | did you proof that ? | 18:35 |
cosmic_ | sorry for my english | 18:35 |
cmdln | /usr/sbin/lircd --device=/dev/lirc0 | 18:35 |
cmdln | from ps aux | grep lirc | 18:36 |
cosmic_ | ah | 18:36 |
cosmic_ | ok | 18:36 |
cosmic_ | so what exactly , doesnt work ? | 18:36 |
cosmic_ | Jinxed-: how is it ? | 18:36 |
cmdln | my grey hauppage remote | 18:36 |
cmdln | on my pvr 350 | 18:36 |
cosmic_ | i have it to | 18:36 |
cmdln | when I run irw and press buttons I get nothing back | 18:37 |
cosmic_ | not the PVR 350 , but the remote control the grey | 18:37 |
Jinxed- | hmm | 18:37 |
Jinxed- | i changed it to /home/kyle/software/gnump3d | 18:37 |
Jinxed- | and it still says I don't have permission to write | 18:37 |
cmdln | I do however get stuff if I cat /dev/lirc0 and press buttons, so there is some signal | 18:37 |
cosmic_ | i dont remember very well but i thinc you need a lircrc for displaying keys in "irw" | 18:38 |
cosmic_ | type : chmod 777 /home/kyle/software/ && chmod -R 7777 /home/kyle/software/ DELETE it after testing!!!!!!!!!11 | 18:39 |
cosmic_ | or undo chmod 777 | 18:39 |
cosmic_ | cmdln: didi you irrecord ??? | 18:40 |
cmdln | no | 18:40 |
cosmic_ | then do it | 18:41 |
cosmic_ | and try out | 18:41 |
Jinxed- | said operation not permitted | 18:41 |
cosmic_ | no garuntee | 18:41 |
cosmic_ | dont forget sudo @ Jinxed- | 18:41 |
cosmic_ | STOP | 18:41 |
Jinxed- | tried it still said | 18:41 |
Jinxed- | kyle@Dell-Lynix:~$ sudo chmod 777 /home/kyle/software/ && chmod -R 7777 /home/kyle/software/ | 18:42 |
Jinxed- | chmod: changing permissions of `/home/kyle/software/gnump3d/access.log': Operation not permitted | 18:42 |
Jinxed- | chmod: changing permissions of `/home/kyle/software/gnump3d/error.log': Operation not permitted | 18:42 |
cosmic_ | create as user Kyle an directory called : /home/Kyle/lirc | 18:42 |
cosmic_ | you have forgotten sudo on the twice , by the way | 18:42 |
cosmic_ | on the twice ???? at the second time | 18:43 |
Jinxed- | oh | 18:43 |
Jinxed- | well I just changed it to /home/kyle/lirc/error.log same problem | 18:44 |
Jinxed- | chmod those files? | 18:44 |
cosmic_ | ???? | 18:44 |
cosmic_ | how is that possible ? chown this dir | 18:44 |
cosmic_ | now i just think i am tooo DAU , too help you guys | 18:45 |
cosmic_ | i will drink a GERMAN BEER , by the way ;) | 18:45 |
cosmic_ | your finished @ cmdln ? | 18:48 |
cosmic_ | your finished @ Jinxed- ? | 18:48 |
Jinxed- | huh? | 18:49 |
cosmic_ | I have to whatch a Video with my girlFirend tonight ... so whats up | 18:49 |
Jinxed- | ok i tried chmod | 18:50 |
cosmic_ | did you try chown ? | 18:51 |
Jinxed- | chown? | 18:51 |
Jinxed- | kyle@Dell-Lynix:~$ gnump3d | 18:51 |
Jinxed- | The directory which we will write a record of files being served | 18:51 |
Jinxed- | isn't writable by us - /var/cache/gnump3d/serving. | 18:51 |
Jinxed- | Please fix this by either changing the permissions on that directory | 18:51 |
Jinxed- | or setting an alternate directory by changing the following line: | 18:51 |
Jinxed- | now_playing_path = /var/cache/gnump3d/serving | 18:51 |
cosmic_ | chown (-R) user:group DIR | 18:51 |
Jinxed- | hold on i think it is working | 18:51 |
cosmic_ | ??? | 18:52 |
Jinxed- | it worked! | 18:52 |
cosmic_ | good | 18:52 |
cosmic_ | what do you see ? | 18:52 |
Jinxed- | username/password prompt | 18:52 |
cosmic_ | and after it ? | 18:53 |
Jinxed- | ugly green/grey gnump3d page | 18:54 |
Jinxed- | with all my music | 18:54 |
cosmic_ | so fucking wheres your problem ? ;=) | 18:54 |
Jinxed- | no problem | 18:54 |
cosmic_ | now , you have to edit, gnump and you filesystem so , that gnump3d can run as its own user | 18:55 |
Jinxed- | nice | 18:55 |
cosmic_ | you dont have to , remember ... YOUR FREE | 18:55 |
cosmic_ | but it would be the secured version in my oppinion | 18:55 |
cosmic_ | ther are cool themes for gnump3d , just google it | 18:56 |
cosmic_ | just google them ! | 18:56 |
cosmic_ | sorry | 18:56 |
Jinxed- | sorry for what... helping me get my program running | 18:58 |
cosmic_ | no sorry for writing shit english | 18:59 |
cosmic_ | :) | 18:59 |
cosmic_ | or american , as u prefer | 18:59 |
Jinxed- | haha | 18:59 |
cosmic_ | :) | 18:59 |
Jinxed- | so what are the next steps to be able to access remotly | 19:00 |
cosmic_ | now you have to edit ....... nump3d and your filesystem for reading (executing ) the files by its own user (gnump3d .... or what ubuntu creates for this service) , then i tell you a possibility how to make YOUR OWN SERVER ;) public | 19:01 |
Jinxed- | what is nump3d | 19:03 |
cosmic_ | sorry i meant : gnump3d | 19:03 |
cosmic_ | did you try streaming music to a client ? | 19:04 |
Jinxed- | ok so what is the nextstep | 19:04 |
cosmic_ | so quick ? | 19:04 |
Jinxed- | it says .m3u | 19:04 |
cosmic_ | did you realy changed everything ? | 19:05 |
cosmic_ | did you tried to open the .m3u file ? , try it out ! | 19:05 |
cosmic_ | i am on a recycling way :) | 19:05 |
Jinxed- | i tried it said i don't have the codec | 19:05 |
cosmic_ | do you have vlc ? or totem ? | 19:08 |
Jinxed- | no | 19:09 |
cosmic_ | what do you use as audio player ? | 19:10 |
cosmic_ | you need a client that is compatible to m3u playlists | 19:10 |
Jinxed- | amarok | 19:12 |
cosmic_ | ? i dont youse amarok , sorry | 19:13 |
cosmic_ | install vlc , thats what i know | 19:13 |
cosmic_ | you can deinstall it afterwards by typing : sudo apt-get remove --purge vlc | 19:14 |
Jinxed- | open with | 19:14 |
Jinxed- | how do i find other programs | 19:14 |
cosmic_ | you have to google the WORLD or THE FORUMS , why amarok doesnt work @ the mom | 19:14 |
Jinxed- | where are they located | 19:14 |
cosmic_ | /usr/bin/ | 19:15 |
cosmic_ | it should be listet without searching when its installed | 19:15 |
cosmic_ | cmdln: are you there ? | 19:15 |
cosmic_ | whats your status quo ? | 19:15 |
Jinxed- | cosmic it works with amarok | 19:16 |
Jinxed- | i just had to figure out how to open it with it | 19:16 |
cosmic_ | cool , and you did it by your own , thats cool | 19:16 |
Jinxed- | yep | 19:17 |
cosmic_ | so is gnump3d working ? | 19:17 |
Jinxed- | now to make it so I can acess this from anywhere | 19:17 |
Jinxed- | yeah | 19:17 |
cosmic_ | good | 19:17 |
cosmic_ | do you like it ? | 19:17 |
Jinxed- | do i just change my local ip to external ip? | 19:17 |
Jinxed- | yeah | 19:17 |
Jinxed- | its nice | 19:17 |
Jinxed- | eventually maybe get something with a few more features | 19:17 |
cosmic_ | ok yes , just change , and make clear thet the route is fine | 19:18 |
Jinxed- | how come the music is now m3u instead of mp3 | 19:18 |
cmdln | cosmic_: yeh, i got some of them recorded | 19:19 |
cosmic_ | m3u is a "PLAYLIST FORMAT" it sets the path for the mp3 files and as i think about it some other options too | 19:19 |
cmdln | now irw shows keys | 19:19 |
cmdln | still dont register in myth | 19:19 |
cosmic_ | cmdln: you have created a file by using irrecord ? | 19:19 |
cmdln | yeh | 19:20 |
cosmic_ | thats normal | 19:20 |
cmdln | and i started lircd with that config | 19:20 |
cmdln | restarted myth-backed and mythfrontend | 19:20 |
cosmic_ | you have to copy this file in the ~/mythtv/.lircrc | 19:20 |
Jinxed- | hmm | 19:20 |
Jinxed- | it doesn't work when i put external ip in | 19:20 |
cosmic_ | moment | 19:20 |
cosmic_ | i mean the file with the format i gave you ! | 19:21 |
cosmic_ | is the external IP VALUE still VALID ??? | 19:21 |
Jinxed- | i just went to whatismyip on google | 19:22 |
Jinxed- | and got it | 19:22 |
Jinxed- | and changed the conf file | 19:22 |
Jinxed- | restarted it | 19:22 |
Jinxed- | and then typed it in | 19:22 |
Jinxed- | and it didn't work | 19:22 |
cosmic_ | how do you route it ? | 19:22 |
cmdln | cosmic_: copied the file to /home/mythtv/.lircrc restarted mythbackend and frontend | 19:23 |
cmdln | still no go inside mythtv | 19:24 |
cosmic_ | paste the file to me @ cmdln | 19:24 |
cmdln | cant paste it ... no networking to that box atm | 19:25 |
cosmic_ | ????? | 19:26 |
cosmic_ | scp ???? | 19:26 |
cmdln | no networking at all | 19:26 |
Jinxed- | all i did wa change the binding_host to my external ip | 19:26 |
Jinxed- | what else do i need to do | 19:26 |
Jinxed- | and restarted gnump3d | 19:26 |
cosmic_ | does it look like : http://paste.ubuntu.com/11471/ | 19:27 |
cosmic_ | how do you route it ? @ Jinxed- | 19:28 |
Jinxed- | route it? | 19:28 |
cmdln | cosmic_: yeah looks similar | 19:28 |
Jinxed- | well i do use a router | 19:30 |
cosmic_ | Jinxed-: look , There is a LAN - LOCAL AREA NETWORK , in witch you clients @ hosts exist and live ... to exist they need a switch ... this is an komponent to connect cleints and hosts ... ...to connect all these clients you need a router .... which routes your LAN ADRESSES to Another IP-Segment ..... | 19:30 |
Jinxed- | if that is what you mean | 19:30 |
Jinxed- | alright | 19:30 |
cosmic_ | ...to connect all these clients to the internet you need a router .... which routes your LAN ADRESSES to Another IP-Segment ..... | 19:30 |
Jinxed- | yeah | 19:31 |
Jinxed- | i am connected through a router | 19:31 |
cosmic_ | ok | 19:31 |
cosmic_ | so tell the router to route everything on PORT = YOUREGNUMP3DPORT TO THE HOST WHERE GNUMP§D IS RUNNING ON ... | 19:32 |
cosmic_ | cmdln: This file is the /etc/lirc/lircd.conf | 19:32 |
cmdln | ok brb | 19:33 |
Jinxed- | how would i do that | 19:33 |
cmdln | going to try to fix the bridge first | 19:33 |
Jinxed- | I don't have acess to the router | 19:33 |
cosmic_ | the lircrc file schould look like this : http://paste.ubuntu.com/11457/ | 19:33 |
Jinxed- | cosmic_, do you use any im clients? | 19:33 |
cosmic_ | brb ??? | 19:33 |
cosmic_ | whats that ? | 19:33 |
Jinxed- | =mom | 19:33 |
Jinxed- | i think | 19:33 |
cosmic_ | löl | 19:33 |
Jinxed- | be right back | 19:33 |
cosmic_ | you think = brb = mom | 19:34 |
cosmic_ | oh i see | 19:34 |
cosmic_ | :) | 19:34 |
Jinxed- | i don't know what mom means | 19:34 |
Jinxed- | mom= mother for short | 19:34 |
cosmic_ | mom = just a moment | 19:34 |
Jinxed- | =brb | 19:34 |
cosmic_ | he he | 19:34 |
cosmic_ | what is im clients ? | 19:34 |
Jinxed- | msn, aim, yahoo, | 19:35 |
Jinxed- | etcx | 19:35 |
cosmic_ | i think i youse yahoo | 19:35 |
cosmic_ | i hope so ;) | 19:35 |
Jinxed- | hmm | 19:35 |
Jinxed- | alright | 19:35 |
Jinxed- | well ihave to go right now | 19:35 |
Jinxed- | I have to buy clothes for a meeting tonight | 19:35 |
Jinxed- | Thank you for everything | 19:35 |
cosmic_ | tonight ? | 19:35 |
Jinxed- | I am in the US | 19:36 |
cosmic_ | are you american ? | 19:36 |
Jinxed- | it is only 2:30 pm here | 19:36 |
cosmic_ | oh i see | 19:36 |
Jinxed- | yeah | 19:36 |
cosmic_ | löl | 19:36 |
cosmic_ | its 8:36 PM over here | 19:36 |
Jinxed- | Anyway thanks again | 19:36 |
cosmic_ | ;) | 19:36 |
Jinxed- | adios | 19:36 |
cosmic_ | nothing too thanks , good luck | 19:36 |
cosmic_ | cu | 19:36 |
cosmic_ | hey cmdln how is it ? | 19:39 |
cosmic_ | i have to leave soon | 19:39 |
cosmic_ | ok i managed it with my girlfriend , i will wait for you ... but i go to toillete a first ;) | 19:42 |
cosmic_ | so whats up ? @ cmdln | 19:51 |
cosmic_ | there is a half a hour where i can wait .. | 19:53 |
cosmic_ | In witch Menu can i setup my recordings Folder ???? | 20:07 |
ille_ | mythtv-setup 6. storage groups | 20:23 |
cosmic_ | ille thx | 20:24 |
Metox | I get the following out put when listing the pci bus. I am not sur if the drivers are instlled ok. How can I check? | 20:31 |
Metox | 02:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) | 20:31 |
Metox | 02:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) | 20:31 |
Metox | 02:0b.0 0400: 109e:036e (rev 11) | 20:31 |
Metox | Subsystem: 107d:6609 | 20:31 |
Metox | Flags: bus master, medium devsel, latency 32, IRQ 19 | 20:31 |
Metox | Memory at e0000000 (32-bit, prefetchable) [size=4K] | 20:31 |
Metox | Capabilities: <access denied> | 20:31 |
Metox | 02:0b.1 0480: 109e:0878 (rev 11) | 20:31 |
Metox | Subsystem: 107d:6609 | 20:31 |
Metox | Flags: medium devsel, IRQ 19 | 20:31 |
Metox | Memory at e0001000 (32-bit, prefetchable) [size=4K] | 20:31 |
Metox | Capabilities: <access denied> | 20:31 |
Metox | MythTV does not detect the card, but the OS sees it. What is the easiest way to install the drivers? | 20:34 |
reclusivemonkey | hello everyone | 20:52 |
=== ille_ is now known as ille_away | ||
Corvix | hi everyone, I've been using mythtv for quite a while now, and I still wonder if theres a more convenient way to manage channels in mythtv than the setup channel editor or the mythweb? | 22:32 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!