[00:01] how to configure ldap client on hardy desktop?? [00:05] will kde4.1 be default in 8.10 [00:05] ichigo_nl: not sure yet [00:05] ichigo_nl: its way too early to know for sure [00:05] * jabba hopes so [00:05] kde4 is so purty [00:06] yeah okay but 4.1 will be usable [00:06] kde4 might be but no word on kde4.1 [00:06] ichigo_nl: that doesnt mean much if its not stable it most likely wont be used unless stable comes shortly after [00:06] kde4 was usable and still is but its on a separate disk for a reason :) [00:07] gnomefreak it will be stable believe me [00:07] and no kubuntu is not LTS [00:07] ichigo_nl: even kde devs cant say that for sure [00:07] ubuntu is lts and still its not good [00:07] Kubuntu is not LTS [00:07] where are the instabilities? i've had a few anomolous crashes in konq but nothing related to qt [00:07] Ubuntu is [00:08] and for me, it's pretty stable, other than my own fault with a couple of kde3/kde4 guts mingling [00:08] kde4 is stable [00:08] ichigo_nl: instead of labling kde3.5 LTS and kde4 not they opted for not all around to be less confusing [00:09] i like the change that kde did [00:09] come on guys, vista is the way to go [00:09] anethum_a: i has an xp, vista, ubuntu laptop :) [00:09] o only kubuntu kde4 [00:10] jabba, triple boot? [00:10] anethum_a: yup [00:10] damn [00:10] jabba, nice [00:10] anethum_a: i <3 grub [00:10] lol [00:11] can you guys pleas move kde4 talk to #kubuntu-kde4 as this is turing into alot longer of a topic than it should have bene [00:11] been [00:11] where do [00:11] can you please go to #ubuntu there the gnome channel :P [00:11] where for ldap??? [00:12] gnomefreak: is there a threshold of how long somebody can talk about something before it becomes necessary to stop discussion? [00:12] ichigo_nl: please be polite and go to that channel and keep this one free for kde3 [00:12] jabba: there is a quick answer if off topic [00:13] if its longer than a quick answer it need to go to correct channel [00:13] gnomefreak, there are reports that kde4 support is asleep at the wheel , non responsive [00:13] BluesKaj: than why is the channel there? [00:14] gnomefreak: presumably so you can tell people to go there. [00:14] it should be in one channel IMHO but i was told this yesterday and being an op i have to keep up with rules [00:14] dunno, i don't hang out there ..just passing on the info [00:14] its bullshit that kde4 needs a seperate channek [00:15] ichigo_nl: please dont push the rules any. please watch your language [00:15] gnomefreak you think you are operater ? [00:15] can to try again? [00:15] care [00:15] gnomefreak: does canonical have anything to do with the various ubuntu irc channels? [00:16] jabba: not really this rule was made by kde guys most likely hobbsee or Riddell [00:16] roger [00:16] s/guys/guys and gals [00:17] you should just answer to kde4 help because kubuntu-kde4 channel is dead [00:17] hi [00:17] ichigo_nl: now stop [00:17] can anyone help me fix my sound? [00:17] merlin08: what is the problem? [00:18] when i connect my headset i hear the sound like the system recongnized it, but when i play music nothing comes out [00:18] what is the sound of the system recognizing it? [00:18] and i gather this is a hard connection not bluetooth or whichever? [00:18] like the windows login sound [00:18] gnomefreak you are no operater ??? [00:19] its a usb connection [00:19] sorry, i don't use usb audio devices [00:20] :( [00:20] you can always check www.uboontu.com [00:21] !audio | merlin08 [00:21] merlin08: If you're having problems with sound, first ensure ARTS is running, by going to K Menu -> System Settings -> Sound System and making sure "Enable the sound system" is checked. If that fails, see https://help.ubuntu.com/community/Sound - https://help.ubuntu.com/community/SoundTroubleshooting - For playing audio files, see !Players and !MP3 [00:22] thanx [00:22] where is the folder with system sounsd? I can't seem to find it [00:29] I just upgraded from 7.10 to 8.04 and keyboard repeat is now shut off in X... How can I fix it? [00:39] hello [00:41] Noob question, Does aptitude have a .rar extractor or do i need to download from the site? [00:42] n3ksus: install unrar [00:43] thanks [00:51] anyone know why after pushing install when booting from cd, the computer would freeze? [00:51] the kubuntu loading screen comes up, but never loads [00:52] wlynch, live cd ? [00:52] no, base [00:52] should i do live? [00:53] did you do an md5sum on the OS data before burrning it ? [00:53] no [00:53] could be corrupt [00:54] after downloading iso, how do i do a md5sum? [00:54] try the live cd , it'll give you a better idea about whether your hardware will work with kubuntu , if you have some unusual hardware [00:55] dont have reason to believe otherwise [00:55] but dont know [00:55] !verify | wlynch [00:55] wlynch: To verify your Ubuntu ISO image (or other files for which an MD5 checksum is provided), see http://help.ubuntu.com/community/VerifyIsoHowto or http://www.linuxquestions.org/linux/answers/LQ_ISO/Checking_the_md5sum_in_Windows [00:55] only thing im not sure about is if my video card [00:55] ati radeon 1100 [00:56] ati radeon , it should be fine [00:56] I use an onboard elcheapo x200g radeon [00:57] works just fine [00:57] k [00:57] how do i use adium on kde? [00:57] i heard you can run coca apps now on kde [00:58] dunno Fujisan , pidgin ? [00:59] no [00:59] adium [01:00] adium is a Mac app , no? [01:00] BluesKaj: it is =) [01:00] Fujisan: cocoa, heh [01:00] Fujisan: but someone in the Free Software world will invariably come up with a software project and name it Coca. [01:00] Fujisan: just like someone came up with Snort. [01:00] Fujisan: and then Acid. [01:01] this linux not unix [01:01] true [01:01] is [01:01] is or is not?? [01:02] * BluesKaj wondewrs why ppl want to run mac apps in linux [01:02] BluesKaj: thats a good question [01:02] cuz osx is the best maybe [01:02] best UI anyways [01:02] why not run pidgin :P [01:02] no messagestyles [01:03] run funpidgin [01:03] it will have messagestyles [01:03] Fujisan, this is kubuntu help chat , find mac help elsewhere [01:03] http://funpidgin.sourceforge.net/content/features [01:04] #mac or #macosx [01:05] how to you start the desktop from the command line? [01:05] startx [01:05] Funpidgin is a fork of the popular open source client Pidgin which allows instant messaging with over twenty different protocols. [01:05] What makes us different from the official client, is that we work for you. Unlike the Pidgin developers, we believe the user should have the final say in what goes into the program. [01:05] Hey, I'm looking for some help w/ Firefox 3b5 on Hardy. mailto links no longer work. There's a bug report on launchpad w/ a potential workaround that doesn't seem to work for me. Any suggestions? [01:06] "osx is best maybe" hahaha lovely. [01:07] Anyway I need some help folks. I can't connect to my network anymore! [01:07] I have to use a LiveCD to get on here. [01:07] I installed KWlan, didn't like it, uninstalled it, now KNetwork Manager is giving me fits [01:07] it won't accept any changes I make [01:08] it mentioned something with trouble writing to the XML backend or something [01:09] !KNetworkmanager [01:09] You want to connect via dial-up? Read https://help.ubuntu.com/community/DialupModemHowto - Also try disabling/removing KNetworkManager if KDE applications cannot connect using dial-up [01:09] !eth0 [01:09] Factoid eth0 not found [01:10] I don't want dialup [01:11] yeah, I don't know why the response script talks about dialup :/ [01:11] and it's difficult to correct whatever problem I'm having since I can't access the internet :-( [01:12] I don't know anyone who uses dialup anymore [01:12] router? [01:12] yes [01:12] I just bought my first mp4 player :D [01:12] I'm on a laptop and sometimes I use wireless, at the moment I'm wired [01:12] rural ppl still have few options [01:13] yeah I think I would choose satellite over dialup [01:13] I need to convert my divx avi file to mp4, ffmpeg to that? [01:13] not much here about that afeijo , google it for more info [01:13] ok, thanks [01:14] is there a way to fix my knetworkmanager? [01:14] possibly reinstall it? [01:14] how hard is to have 2 internet links? just 2 network board? [01:14] the problem being, I have to be connected to the internet for that to work... [01:15] afeijo, http://www.smorgasbord.net/converting-video-in-linux-using-ffmpeg-and-mencoder/ [01:17] 800 people in here and no one knows how I can fix this? [01:18] Choreboy, we don't know what's wrong ...what error messages are you getting ? [01:18] nothing really, ONE TIME I believe I saw something mentioning error writing XML to the backend or something [01:19] Choreboy, what wireless card and what kind of encryption? [01:19] no encryption, but I'm wired at the moment anyway [01:19] wireless card, I don't recall. Some kind of broadcom [01:20] ping [01:20] ok [01:20] Choreboy, it was working before, correct? no driver issues with the card? [01:20] no issues until I installed KWlan [01:21] didn't like KWlan because I didn't want to take the time to figure it out since KNetwork Manager worked fine for me, so I uninstalled it [01:21] Choreboy, is it possible that KWLan left behind some startup scripts? [01:22] e.g., have you *looked* for startup scripts that have been left behind [01:23] p_quarles: I don't know how to do that [01:23] look in /etc/rc2.d/ and in /etc/rc.local -- any files or lines that might be related [01:23] when i try to login it takes me back to the login screen? [01:24] what can i do to fix that. [01:24] it's going to take me a while to work my way around and look so be back in a minute [01:28] hi, what soft i need to leasen a online radio???? [01:28] amarok [01:29] kaffeine, jajaj, in amarok i cant [01:30] then why did you ask? [01:30] install mp3 support for amarok (libxine1-ffmpeg) and go to the playlists tab in amarok, all of the radio stations are there [01:32] p_quarles: rc.local is a folder, yes? I don't see a folder with that name [01:33] it's a file (if my last message went through, I didn't see it) [01:34] <[Relic]> what's a good and currently maintained program to show system information? [01:34] p_quarles: I don't see anything unusual, but I don't entirely know what I'm looking for. [01:35] Choreboy, either a file in /etc/rc2.d/ (named something like S##kwlan) or a line /etc/rc.local [01:35] p_quarles: no, definitely not either of those. [01:35] Choreboy, hmm -- see if there's anything in /etc/sysctl.conf [01:36] [Relic], what kind of information? [01:36] por favor diganme donde entro en el el español [01:36] !es | personal [01:36] personal: Aquí solamente hablamos inglés. Para Español, por favor entre en los canales #ubuntu-es o #kubuntu-es - allí obtendrá más ayuda. [01:37] does hardy kernel support Memory Stick/Pro? [01:37] <[Relic]> p_quarles, think I used super karamba once, something for core temp/load, mem, etc. [01:37] as in a built in card reader [01:37] personal [01:38] [Relic], well, there's Superkaramba, and then there's Conky [01:38] debes escribir "/join #kubuntu-es" lo q esta entre comillas pero sin comillas [01:38] p_quarles: nothing. === personal is now known as vzla [01:39] Choreboy, does knetworkmanager recognize your wireless card still? or is it saying "no active interfaces"? [01:42] p_quarles: I'm not even sure if I'm using Knetworkmanager. It used to start in the system tray, now it's not there anymore. I go to system settings, then network settings === onechard is now known as slinker [01:42] p_quarles: but it won't enable the lan or wireless [01:43] it says both are disabled, I tell it to enable, it flashes enabled then jumps right back to disabled [01:43] Choreboy, open Konsole or the command dialogue and type "knetworkmanager" (minus the quotes) [01:43] p_quarles: I'm on a liveCD [01:44] KNM works on the live CD, but not when I boot regular [01:44] Choreboy, well, I'm just giving you things to try [01:44] ok so I should reboot and give that a shot [01:45] Choreboy, the other thing would be to run knetworkmanager with kdesu -- this would help determine if it's a permissions problem [01:45] kdesu? is that like kdesudo? [01:45] wow i love linux [01:45] Choreboy: same thing, one links to the other [01:46] anethum_a: me too, I just have alot more to learn about it [01:46] so far it runs faster and just generally better than my XP install [01:46] i find something wrong (or not working right) and in 10 minutes i find a fix for it [01:46] anyone know how to make linux stop starting my hdd for no reason ? it spins down/up about every 30 sec. and nothing is running. [01:47] sorry, random interjection from a question i asked about 10 minutes ago on here lol [01:47] Choreboy, and since you're not using WPA encryption, hooking up wireless by the CLI is actually very easy -- you could make an alias for connecting to your network and not have to worry about the network manager [01:48] I just use MAC filtering, no one around here is savvy enough to sniff my packets [01:49] hi, I have a big problem with Kubutnu 8.04, [01:49] p_quarles: that may be true but this is a laptop and I do take it elsewhere so I need the ability to easily be able to connect to other networks. === hagabaka` is now known as hagabaka [01:49] p_quarles: If this works you won't see me back here, so thanks in advance and wish me luck [01:49] Choreboy, connecting is as easy as "sudo iwconfig [device-name] essid [network-name] && sudo dhclient [device-name]" [01:50] oh I'll have to save that [01:50] well the problem is that sometimes when I want to wathch a movie, when it starts, the display puts black and I can not do nothing [01:51] how i leasen a online radio in kubuntu. the files is ".pls" ".wax" and "rmm" [01:51] has anyone used pulseaudio [01:52] i need some help if oyu can [01:53] you guys this has taken almost 3 days to get me sound working [01:53] can someone help me that actually knows what to do [01:54] sorry, did anyone answer my Q ? [02:13] <_2> howto tell linux not to touch my hdd ? [02:13] any reason why my flash/shockwave/etc. isn't working in 8.10 ? [02:13] <_2> cause 8.10 is pre-alpha ? [02:14] ? [02:14] isn't 8.10 hardy ? [02:14] <_2> no. [02:14] 8.04 then [02:14] <_2> !release [02:14] Ubuntu releases a new version every 6 months. Each version is supported for 18 months to 5 years. More info at http://www.ubuntu.com/ubuntu/releases & http://wiki.ubuntu.com/TimeBasedReleases [02:14] <_2> http://wiki.ubuntu.com/TimeBasedReleases <<< in particular [02:15] I'm running kubuntu feisty and need alsaconf. Anyone know why it's not in alsa-utils? [02:15] <_2> Firefishe ubuntu has never used alsaconf [02:18] _2: ?? Please explain. [02:18] <_2> /usr/bin/asoundconf [02:18] I just want the script [02:18] k..I'll try that [02:18] thanks [02:19] <_2> to the best of my knowledge no ubuntu release has ever supplied alsaconf maybe it's depreciated by ubuntu... idk [02:19] How do I get the links within Thunderbird to open in Firefox? [02:19] _2: I see [02:20] Not sure what was removed during the 7.10 to 8.04 upgrade, but the links don't do a thing. [02:20] _2: Too bad, alsaconf is a powerful command line utility. [02:20] <_2> Firefishe that's probably why they don't like. ubuntu is a-cli biased ya know [02:23] if i installed kubuntu can i still add the gnome desktop? [02:23] nflava: yes [02:24] do i just do a sudo apt-get install gnome? [02:24] ubuntu-desktop [02:24] ah [02:24] nice, there we go [02:25] i wanna check that out as well see which i can get used to better [02:25] <_2> nflava the way you had it "sudo apt-get install gnome" will also work, just gives different packages [02:25] well i tried that but it said an error, so i was not sure if it was me or something [02:25] _2: Well, I found *something*. It's located in a weird portion of my /var/lib/flwm subdirectory. I execute it, it opens an xterm, and asks for my root password, which I don't have, as I use sudo (even on my stock debian boxen). [02:26] _2: Any way around that? [02:26] <_2> just as "sudo apt-get install kde" will install kde as well as "sudo apt-get install kubuntu-desktop" will [02:26] i love my fios this download will only take a couple minutes at 1.8mb/s :) [02:27] thanks 2 [02:27] _2: Incidentally, what is "a-cli" ? Anti-CLI? [02:27] <_2> Firefishe temp passwd ? sudo passwd root set the password use it and sudo passwd -dl root [02:27] <_2> Firefishe yes. [02:28] _2, Firefishe: https://bugs.launchpad.net/alsa-utils/+bug/29597 [02:28] Launchpad bug 29597 in alsa-utils "alsaconf missing from alsa-utils" [Medium,Invalid] [02:28] ok, time to configure gdm, this wont mess up anything with kde if I am doing this through the konsole [02:28] (btw, that's sort of a very biased assesment _2) [02:28] OK folks I have an issue I need help. SOMEHOW I uninstalled KNetworkManager. How can I reinstall it if I can't connect to the repositories? [02:28] <_2> Jucato yes. and developed over several years as well. [02:29] kubuntu akbar [02:30] <_CrashMaster_> reinstall from disc [02:30] <_CrashMaster_> just add it as a source [02:30] not sure how to do that but I'll look it up [02:30] <_2> dpkg -i path/to/file.deb [02:30] oh default nickname, lovely. [02:30] _2: Could you please go over that command sequence again, please? I think I see what you're saying: Create a temporary password: "root" Then with the -dl switch, delete it, correct? [02:31] Jucato: Thanks for the bug report, I'll go over it :) [02:31] _CrashMaster_: I installed from the alternate install disc, should I use that, or should I use the LiveCD disc? [02:31] <_2> Firefishe create a password for root, use the tool that is asking for a root password, reset the root account to the previous state. === ubuntu__ is now known as Choreboy [02:32] There we go, that's better. No more default [02:32] _2: Could you please re-type the exact command sequence again, separating each one a bit more clearly for me. I was having a little trouble. [02:32] <_2> Firefishe you asked for a workaround that is one. [02:32] yes _2, and I appreciate it very much, thank you [02:32] there is anyone who could help me? [02:33] !ask | freethinker [02:33] freethinker: Please don't ask to ask a question, ask the question (all on ONE line, so others can read and follow it easily). If anyone knows the answer they will most likely answer. :-) [02:33] * Dr_willis missed the question. [02:33] <_2> sudo passwd root ; ( # use the app in question 'alsaconfig' ) ; sudo passwd -dl root [02:33] why is sudo not an appropriate method of achieving the same thing? [02:33] cant run alsaconfig with sudo? [02:34] * Dr_willis is confused also. [02:34] sudo -s, run the command, exit. [02:34] no, Dr_willis and Daisuke-Ido; I tried it, but the xterm just pops up then crashes. [02:34] Does anyone know? If I have to reinstall a program using the disc as a source, should I use the alternate install disc I used to install, or can I use the LiveCD disc? [02:34] <_2> Dr_willis he said it asks for the root password. it's not even in the path you know. [02:34] xterm pops up? weird. [02:34] I used the alternate install because I wanted XFS file system and you can't do that on the LiveCD. [02:34] which kubuntu program allows connection to an rdp virtual desktop? [02:34] "pops up"? [02:34] makes one wonder what would happen from the console. [02:34] Dr_willis: Pops up and disappears, like it segfaults in the middle of the command [02:35] Firefishe: tell me, are you running this from alt+f2? [02:35] you should be doing this from a terminal [02:35] Choreboy: alternate install. you can't use the Live CD as a CD repository (except for some very few packages I think) [02:35] i would suggest trying from a console, see if it does anything differently. [02:35] i can not listen to rosegarden, i have installed the program, and sox,and sndfile, and some packect named by fluid...., but still i can not listen to anything [02:35] Daisuke-Ido: Okay, I can do that, too. [02:35] <_2> ATTENTION there is no alsaconfig command in the path. !!! [02:36] <_2> s/ig// [02:36] perhaps that's the problem. [02:36] how was alsaconfig even installed? [02:36] give the full path? [02:36] whoops I lost connection. Did anyone answer me by chance? [02:36] [09:30] Choreboy: alternate install. you can't use the Live CD as a CD repository (except for some very few packages I think) [02:37] <_2> things that are not in *bin/ are not inteneded to be executed they do that on purpose.... [02:37] Jucato: thanks! Is it ocmplicated to get Adept to use the CD as a "repository source"? [02:37] is anyone who have anwser it my kinda question? [02:37] <_CrashMaster_> For the longest time, I thought /bin was a british version of the Recycle Bin [02:38] That would be the Rubbish Bin, and it means binaries. [02:38] Choreboy: no. in Adept Manager, just go to Adept menu -> Manage Repositories, 3rd Party tab then click on Add CD-ROM [02:38] <_CrashMaster_> Pici: So I have since discovered :) [02:38] Jucato: Thanks! Wish me luck. [02:41] _2: Well, it tried to pop up a gnome-terminal in alt+f2 (regular terminal) but it got a gtk error. Evidently flwm is using the gnome-terminal command for some reason. Also, when I tried it again in the normal gui cli window, it tried to execute /usr/sbin/alsaconf, which isn't even there. [02:41] I can listen to rosengarden sound there is anyone who can help me? [02:41] _2: So that's what it's doing, trying to execute alsaconf in /usr/sbin [02:42] i have install 3 pacathes [02:42] <_2> like i said several times. ubuntu has never used "alsaconf" [02:42] Firefishe: what did you install that's trying to use alsaconf? [02:42] <_2> asoundconf [02:42] Daisuke-Ido: I just want to use alsaconf [02:43] <_2> dpkg -L alsa-utils | grep alsaconf [02:44] sox, sndfile , fluid... i cant remenber [02:44] <_2> also dpkg -L alsa-base | grep alsaconf [02:45] Speaking for the Debian ALSA packaging team I'd like to clarify our position. alsaconf is a poorly written and poorly maintained program. [02:45] from the bugreport page [02:45] alsaconf ain't there [02:45] get over it [02:45] it's deliberate :) [02:45] <_2> grep -HiRe alsaconf /var/lib/dpkg/info [02:45] Daisuke_Ido: Thank you. That helps a bit. [02:46] <_2> anyone see what i mean yet ? [02:46] i am gone try to install that and see what happen [02:46] _2: um, yeah, see what i just wrote [02:47] How do I get the links within Thunderbird to open in Firefox? [02:47] Not sure what was removed during the 7.10 to 8.04 upgrade, but the links don't do a thing. [02:48] <_2> Daisuke_Ido i was trying to explain that ubuntu has never used alsaconf and the script that he was trying to run was only an alsaconf wrapper and that's why it was failing. [02:48] Daisuke_Ido: Although I'm risking myself sounding like a compleat ideeut, I'd still like, heh, to inquire: "So that means that the ALSA Packaging Team dropped alsaconf because it was a piece of junk?" If alsaconf is deprecated, what replaces it, or at leasts, attempts to fill the void, if void--in the devloper's opinons--there is? [02:48] i wouldn't say never [02:48] Firefishe: nothing does, and it was dropped by debian (i believe) and ubuntu (i know) [02:48] _2: it was used prior to breezy [02:48] <_2> Daisuke_Ido did they use it in warty ? i don't go that far back in ubuntu time. [02:49] but that was quite some time ago [02:49] and not at all applicable now :) [02:49] Daisuke_Ido: So what is used to configure alsa then? alsactl? [02:49] are you using multiple sound cards? [02:49] that !alsa wiki/factoid dont mention it? [02:49] are you using an old ISA sound card? [02:50] <_2> Daisuke_Ido ok i might be wrong then but i have hoary and i didn't think it's in there either... ;/ [02:50] if the answer is no, you don't need alsaconf - it has been deprecated for a long time now [02:50] _2: they may have removed it at that point, this bug report page only goes back to breezy though [02:50] Daisuke_Ido: To some extent, yes, although I'm really doing this to see how alsa is controlled, if at all, in kubuntu. Command line, preferably. [02:50] * Daisuke_Ido headdesks [02:51] <_2> Daisuke_Ido ok. and like you stated, anything pre-dapper is irelivent anyway [02:51] i download flash plugin for mozilla. Now when I open a with flash my firefox crash? anybody can helpme? [02:51] hmm i dont know if i like gnome or kde more lol [02:51] nflava: kepp both around :) [02:51] i download flash plugin for mozilla. Now when I open a web with flash my firefox crash? anybody can helpme? [02:51] hard drive space is cheap [02:51] i defitinly shall [02:51] but im tryin to decide which one i should more [02:51] i just installed gnome [02:52] i use gnome, but use both kde and gtk apps [02:52] * Firefishe really has this question, and nothing else: How does one configure ALSA in kubuntu? [02:52] and i did a kubuntu install on saturday [02:52] im just bored of windows and wanna learn more [02:53] <_2> nflava it might not have been brought to your attention. but, you can have "any none or all" of the desktop environments installed at any given time. the only restrictions are your physical disk space and your own desires. [02:53] <[Relic]> yeesh! the sensors-detect program is ancient [02:53] yeah i was aware of that [02:53] <_2> k [02:54] i have messed around with differnt releases of linux before but never really stuck with them [02:54] but this time im gunna try to stick with it [02:54] Depends on what you need in an OS. :) Im personally sick of some of the 'song and dance' i have to do to keep windows going. [02:54] yeah windows just bores me anymore [02:54] i want something differnet [02:55] as long as i can get all the things going ok that i do with windows [02:55] Well with Linux - It pays to learn the core fundamentals. [02:55] upnp media server, dvd burning, irc, ftp hehe [02:55] then the differeances in the disrtos are , often just trivial changes. [02:55] somebody [02:55] please help me [02:56] !somebody | mr_sukor [02:56] mr_sukor: A large amount of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? [02:56] anyone can speak malay? [02:56] <_2> nflava may i sujest that you make a backup of the clean install makes it easier to transit if you can easily restore a hosed system. and beginner linux users do always hose a system or two, just learning the basic "never do this's" [02:56] not a bad idea [02:57] nf [02:57] Daisuke_Ido: I'm sorry, I did not mean to sound so dumb, but I still don't have a grasp about alsa and kubuntu and how alsa is configured. I'm still learning, and although not a total klutzoid, I still have issues with some things. [02:57] nflava [02:57] i keep a little partition at the start of my HD. to run 'puppy linux' as a rescue disrto :) for the rest of the system. heh. [02:57] hi [02:57] hi [02:57] flava [02:57] can u help me [02:57] Dr_willis: Quite an interesting thing, that. :) [02:57] probably not too well [02:57] !enter | mr_sukor [02:57] mr_sukor: Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation! [02:57] i'm new user of ubuntu [02:57] as am I [02:58] oic [02:58] <_2> is there a malay channel ? [02:58] <_2> !ma [02:58] hi all [02:58] i dont know how to set up network [02:58] Factoid ma not found [02:58] <_2> !cz [02:58] České uživatele žádáme, aby mluvili v kanále #ubuntu anglicky. Česky je možno se domluvit v #ubuntu-cz. Děkujeme. [02:59] who use skype on kubuntu n how ? thx [03:00] <_2> !zh [03:00] For Ubuntu help in Chinese 您可以访问中文频道： #ubuntu-cn 或者 #ubuntu-tw 或者 #ubuntu-hk [03:00] <_2> i can't find a malay [03:00] !my [03:00] Factoid my not found [03:00] nope [03:00] Is it possible to use an ubuntu desktop cd as part of the upgrade process for updating from kubuntu 7.10 to kubuntu 8.04? If so, how? [03:00] _2 [03:01] Is malay its own language? I dont even rember where malay is at. [03:01] i'm malay [03:01] Daisuke_Ido: I re-read what you wrote earlier. No probs now. Sorry for your headdesk *does one in repentance* [03:01] no problem Firefishe :) [03:01] it wasn't just that, i assure you [03:01] !es [03:01] Aquí solamente hablamos inglés. Para Español, por favor entre en los canales #ubuntu-es o #kubuntu-es - allí obtendrá más ayuda. [03:01] jeje [03:01] <_2> mr_sukor yes i know. that's why i was looking for you a native channel but alas there doesn't seem to be one. [03:01] np. my day has been a bit off today...and not just with sentence structure [03:02] ki parle français ??? [03:02] <_2> !fr [03:02] Ce canal est en anglais uniquement. Si vous avez besoin d'aide ou voulez discuter en francais, merci de rejoindre #ubuntu-fr ou #kubuntu-fr [03:03] !pt [03:03] Por favor use #ubuntu-br ou #ubuntu-pt para ajuda em português. Obrigado. [03:03] cool [03:03] when will kubuntu use kde 4 as standard? [03:04] <_2> b4l74z4r not until more apps are read for it. [03:04] thats vague hehe [03:05] <_2> ready [03:05] what i didn't like about kde is that i couldn't move around the apps in the taskbar [03:05] like re-arrange them to a particular order [03:05] * _2 had to pick up the y he dropped to make that make sense [03:10] <_2> can anyone point me in the right dirrection to solve this issue ? with nothing at all running, my hdd spins down and restarts about every 30 seconds on my lappy. i have read that that is a very bad thing. i remember linux doing that in slackware 5 i had on a lappy but i don't remember what i changed to make it leave the hdd alone until something actually read/wrote to it. [03:11] <_2> anyone have a clue-by-for to hit me with on that ? [03:12] _2: man hdparm [03:12] _2: Specifically, -S [03:12] what is a good app for burning .img files? [03:13] <_2> Kuwanger i don't want to keep it spinning. i want linux to leave it alone and not restart it every 10 seconds for no reason. [03:14] _2: Odds are pretty good that something is using the drive, so linux is waking it up for "good reason". [03:14] <_2> nflava k3b/xcdroast/cdrecord/gnomebaker/nautilus-burning-app [03:15] <_2> Kuwanger absoulte nothing is using the drive but the kernel. that's all that is running. [03:15] _2: ? [03:15] <_2> Kuwanger alt+SysRQ+E killed everything. === narg_ is now known as narg [03:16] _2: Do you have swap? [03:16] <_2> nothing no [03:17] hello there [03:17] <_2> it seems like it was a sysctl command or something i used back then. [03:17] is kde 3.5 still in the repos? [03:17] <_2> !info kde [03:17] kde (source: meta-kde): the K Desktop Environment official modules. In component universe, is optional. Version 5:47 (hardy), package size 7 kB, installed size 40 kB [03:17] <_2> !info kde-core [03:17] kde-core (source: meta-kde): the K Desktop Environment core modules. In component main, is optional. Version 5:47 (hardy), package size 7 kB, installed size 40 kB [03:18] _2: Do you have an ext3 (or other journal) filesystem mounted? [03:18] <_2> Kuwanger ext3 root fs [03:18] <_2> you think it's the journal ? [03:19] _2: Doing some searching, it seems that it might be. [03:19] <_2> i'll mount it ext2 and see [03:22] _2: http://www.thinkwiki.org/wiki/How_to_reduce_power_consumption#Tools [03:22] Specifically, the "sysctl vm.block_dump=1" to find what's causing the spin-up. [03:22] unlock adeptmanager [03:22] <_2> Kuwanger good call. looking into that now [03:23] how to unlock adept mmanager [03:24] <_CrashMaster_> !aptfix | ricket [03:24] ricket: If an APT front-end crashed and your database is locked, try this in a !terminal: « sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a » [03:25] i need the code to unlock adept manager please [03:25] <_CrashMaster_> rickey: if you mean the kdesudo windows, just use your normal user password. [03:26] I have the ubuntu desktop cdrom and am trying to mount casper/filesystem.squashfs with "sudo mount -t squashfs -o loop filesystem.squashfs /mnt/tmp", but I'm getting this in dmesg: "SQUASHFS error: Major/Minor mismatch, trying to mount newer 3.1 filesystem" "SQUASHFS error: Please update your kernel" [03:26] "squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher" is also in dmesg. Shouldn't 3.2 be able to mount 3.1 filesystems? [03:27] <_CrashMaster_> Kuwanger: are to sure you have 3.2 [03:27] <_2> sudo modprobe squashfs ? [03:28] <_CrashMaster_> mn [03:28] <_CrashMaster_> dumb question [03:28] <[Relic]> Hello :) [03:28] <[Relic]> how do I tell if a specific module is in the kernel? [03:28] <_2> i know that udev is supposed to take care of that,, but.. [03:28] what is a good app for burning .img files? [03:28] <_CrashMaster_> lsmod [03:29] _2: Yea, it's already loaded. Hence the dmesg line. [03:29] <_2> [Relic] lsmod or if the module is avalable " . /etc/bash_completion ;modprobe [03:29] ahh! === personal is now known as vzla [03:30] hi all. I was wondering if you know what channel i should ask in about image processing? [03:30] im logged in but im not! creepy [03:30] somebody halp! I uninstalled KNetworkManager and I'm not able to reinstall it from the alternate install CD [03:30] <_2> Kuwanger what is the output of the mount command ? [03:30] <_2> Kuwanger the error message might help [03:31] The general "mount: wrong fs type, bad option, bad superblock on /dev/loop0, ..." [03:31] <_2> Choreboy the live CD and copy the package from it's pool to the system in question sudo dpkg -i package.deb [03:32] edit fstab [03:32] <_2> Kuwanger sudo modprobe loop [03:32] Hmm..looking some more, it seems squash-tools 3.3 creates images in a new format. [03:32] So, I'll just have to d/l and compile a newer version of squashfs. :/ [03:33] is much for my, jajaja [03:33] Choreboy- you can try using ifconfig to enable the interface manually and then install KNetworkManager through Adept [03:33] <_2> Kuwanger i hope you are not telling me they have already broken backwards compatability [03:33] _2: Btw, yea, loop is already loaded. That's how I have my ubuntu cd loaded. [03:33] HI!, i think i got an hacker could you help me? [03:33] i do not know much abou computer [03:34] <[Relic]> _2, trying to get temp readings from my quad sensors which it doesn't seem to load [03:35] Dragnslcr: enable what interface? I tried installing it through adapt from the disc but it's giving me some nonsense about needing to reinstall Java [03:35] <_2> Kuwanger well if /dev/loop0 exists and is supported in the kernel (you confirmed that already) wait. loop0 and you already have one loop device mounted... that's not right [03:35] _2: I mounted the ubuntu image as loop20. [03:36] <_2> [Relic] install lm-sensors run sudo sensors-detect [03:37] <_2> Kuwanger ok. why not loop0 like normal people do :))) [03:37] _2: So loop0 will be used for whatever random thing I might mount in the future. That'll generate less "oh yea, loop0 is already being used by X". [03:39] <[Relic]> _2, 8.04 64bit kde3 sensors detect is severly outdated, tried the new one and it detected though, not sure why it won't activate couldn't remove them old one due to breaking numerous program problems which is very annoying :( [03:40] <_2> anyway let me go on with the recap. loop0 is there working and free. the dir /mnt/tmp exists the actual filesystem exists and all paths are correct. the option "filesystem.squashfs" is not causing problems. then it must be the driver ;/ [03:40] Can anyone help me? I'd hate to have to reinstall. It seems like there should be a simple answer to this but I'm at a loss [03:41] <_2> [Relic] i never mentioned kde anything there [03:41] <_CrashMaster_> Choreboy: you tried sudo ifconfig eth1 up [03:41] <_CrashMaster_> ? [03:42] _2: Yep. :/ [03:42] well in kubuntu network is managed by network manager [03:42] <_2> so just for kicks you did recheck all of those, before filing a bug on the driver ? [03:42] um its user based - nothing needs to be in /etc/network/interfaces except for localhost then use knetworkmanager to select [03:43] Choreboy: whats the problem sorry just got here [03:45] flaccid: I need to reinstall KNetworkManager, Adept is having trouble doing that from my alternate install CD, it is giving me an error telling me I need to reinstall Java6 [03:46] Choreboy: pastebin the output please [03:46] <_CrashMaster_> flaccid: Im pretty sure all he needs to do is establish a "live" network connection and then hit the repos [03:47] <_CrashMaster_> He "cant reinstall from repo because he cant get online with knetworkmanager" [03:47] _2: I haven't filed a bug, but yea, I rechecked all that. [03:47] you can select the cd repos in adept manager then fetch updates then do whatever needs to be done [03:47] if its dhcp on the network interface, you can assign it an ip via sudo dhclient eth0 [03:48] <_CrashMaster_> flaccid: Why couldn't he just use Konsole to run an "ifconfig eth1 up" and then reinstall from the archives? [03:48] because eth1 won't usually be set in /etc/network/interfaces so it will probably say something like eth1 not enabled. depends whats in interfaces file.. [03:49] ok this is all very confusing to me, let me try some stuff. I am not sure if I can pastebin, since I can't connect to the internet [03:49] <_CrashMaster_> flaccid: I dont quite follow. Every linux ive ever played with always had an eth0 if the machine had a nic [03:49] just let us know what it says in a bit more detail - the actual pkg errr [03:50] errr [03:50] error [03:50] thats not exactly how linux logical iface names work [03:50] <_2> i've locked myself out of my own bootloader ;/ [03:50] <_CrashMaster_> recommended reading on the subject? [03:51] probably best resource is a debian or ubuntu book or perhaps on the debian wiki [03:51] I'm *still* working on a sync problem with a clie palmOS handheld. When I sync, here's what puts forth: http://pastebin.org/37192 [03:52] I'm using kpilot [03:53] http://wiki.debian.org/NetworkConfiguration and http://wiki.debian.org/NetworkManager and http://wiki.debian.org/NetworkManager?highlight=%28network%29 [03:53] Well, thanks for all the help. [03:53] sorry i mean http://wiki.debian.org/?action=fullsearch&context=180&value=network&titlesearch=Titles [03:54] i think i got someone in my pc, like an hacker can anyone help me? [03:55] i ecen have firewal [03:55] why do you think s freethinker? [03:55] freethinker: why u think so? [03:55] *even [03:55] cause my firefox is always shotiing down [03:55] freethinker: are you using kubuntu? [03:55] my pidgin also [03:55] ubuntu [03:56] freethinker: start firefox from konsole and when it crashes, pastebin the error it shows in konsole === kewark is now known as krawek [03:56] today i have installed again [03:56] like my 3 time [03:56] they are both gtk applications. is this kubuntu or ubuntu? [03:56] not in the same day [03:57] and also pidgin? [03:57] yep [03:57] ok thanks!! [03:57] flaccid: OK that's got me connected to the network... now let's see if I can install KNetworkManager [03:57] this will find the problem and its very unlikely to be hacker... extremely unlikely [03:57] Choreboy: yeah. that is not going to change your package problems, but with the error from apt we can see what needs to be done [03:59] i say this cause there is some people who i talk on pidgin that knows a lot [03:59] Howdy. [03:59] flaccid: OK what should I do now? Try to install KNM? if so, from Konsole or from Adept? [03:59] well unless you gave them your password or its a weak password and you have exposed something like ssh on the internet then its not - it looks like a software crash to me eg. a segfault or something [04:00] Choreboy: yeah and let us know errors [04:00] I have a network hard drive on my windows network ... When I try to access it through Kubuntu, it does not let me browse the contents like I normally would on one of my windows machines. Anyone know why, per chance? [04:00] what is that command, something like --configure -a to let adept do it's thing? [04:00] baalzevuv: please install and run smb4k and see if you can browse it in there first [04:01] Thx, Flaccid :) [04:01] hello, i know that apparently ubuntu is not supported for ppc anymore, but i have an old mac clamshell ibook with only a 4gb hd and would love to put a linux system on it to use as a work station in another room. will kubuntu or ubuntu work, or does anyone know a good live cd to try with it to see how it well it would do? [04:01] ok thanks again, i gone try in the future to go to console [04:01] Choreboy: sudo apt-get update; sudo apt-get upgrade after enabling the correct repos. don't need to do anything else, just need to see the pkg error [04:03] just installed Kubuntu 8.04 with kde4. dell latitude d630 with nvidia chipset, yet envyng -t brings up the menu, installs, but on reboot it doesnt work [04:03] that is, trying to install nvidia drivers [04:03] flaccid: Update worked, upgrade gave me this error: http://pastebin.com/d2dd10a8d [04:05] !envy [04:05] envyng is an updated version of the *UNSUPPORTED* envy package. It is now part of the ubuntu universe repository and has community support. As an early version, its results may vary but this should be used over the unsupported envy package. [04:05] Choreboy: ok now try the fuzzy fix: sudo apt-get -f install [04:05] and see if it fixes it or returns detailed errors on the pkg dep problem [04:06] how is the best thing, upgrade dapper or install clean hardy? [04:06] rmribeiro: clean will always be better, but upgrades can be successful frequently [04:07] palm sync with clie peg-tj37 success! It was a matter of setting the device to: usb: instead of /dev/pilot. [04:07] rmribeiro: community generally only advises/support upgrading from guty to hardy but not from dapper although its possible and i've done it before [04:08] anyone fimiar with gimpshop? [04:08] <_2> flaccid one jump or four ? [04:09] having issue in kubuntu 8.04 installing gimshop [04:09] _2: i always do 1 [04:09] killer88: whats the error [04:10] <_2> :) me too [04:10] hold om [04:10] coolio [04:10] well i have all kids of issues if i try to uninstall gimp in adept let me remove it now [04:10] ok [04:10] kinds [04:11] having to build from source [04:11] flaccid: after the (fuzzyfix)? I was able to install Java (figured it would be easier to just give in and uninstall later) and then install KNM [04:11] thanks! [04:11] ok coolio Choreboy good luck now :) [04:12] gimp_2.2.4-2_amd64.deb [04:12] thanks! I'm not entirely sure what all went down, but I got it done. [04:12] is what i have and i have the arch [04:12] yeak fuzzy fix is just a term i made up as that command uses fuzzy logic to work out what to do with the pkg problem [04:12] I need to keep an archive of all these commands and what they do [04:13] !software [04:13] A general introduction to the ways software can be installed, removed and managed in Ubuntu can be found at https://help.ubuntu.com/community/SoftwareManagement - See also !Packages, !Equivalents [04:13] decent guides should be up there ^ [04:14] i understand that there are guids wiki articles and such and they all say run 1 simple command and that command does not work [04:14] killer88: sorry i was talking to Choreboy then [04:14] where do you get libexif10? [04:14] sorry [04:14] killer88: got the error yet [04:14] been going nut tring to figure this out [04:15] i need dependency libexif10 [04:15] killer88: install libkexif1 or libkexif12 usually [04:15] !info libexif10 [04:15] Package libexif10 does not exist in hardy [04:15] that version is not available sorry killer88 [04:17] dependency is not satisfyable [04:18] is therr a newer deb file? [04:18] you havnt explained what command you are running, what exactly you are doing and what is the actual error killer88.. [04:18] using the kde tool for installing .deb files [04:19] and you are trying to install gimpshop? [04:19] dependency is not satisfyable [04:19] is there error [04:19] yes [04:19] killer88: is gimp not suffice for you? [04:22] <_2> it kinda ticks me off that eth0 is eth2 on the lappy how to rename it to it's proper eth0 ? [04:22] <_2> can ifconfig do that ? [04:23] trying to overwrite `/usr/share/gimp/2.0/brushes/10x10squareBlur.gbr', which is also in package gimp-data [04:23] _2: i think something like http://ubuntuforums.org/showthread.php?t=315107 should be right [04:24] killer88: well gimpshop is not in ubuntu repos, but this howto seems to work for people: http://delirial.com/archives/howto-gimpshop-on-ubuntu/ [04:24] killer88: this may help as well: http://ubuntuforums.org/showthread.php?t=40427 [04:26] <_2> interesting, i don't have an eth0 or eth1 in ifconfig -a but those are the only two listings in the iftab ;/ [04:27] <_2> deleting /etc/iftab seems to have worked [04:28] <_2> much better. ty. === william__ is now known as nonewmsgs [04:31] back. === fildo\a is now known as fildo [04:31] away: 8 days left till i go overseas :) === fildo is now known as fildo\a [04:34] is there a quick way to install dependencies for a program without actually installing the program itself? [04:34] NightBird: only if the deps are in a separate pkg (libs/dev etc.) to the program's pkg [04:35] or if you compile and do optional make install but thats pretty non standard [04:35] flaccid: that's the situation [04:35] <_2> not thinking of the business practices in any way. only the actual hardware. i'm setting between an older dell mini-tower and a toshiba laptop the dell is quiet enough i can hear every thing the laptop does. [04:35] I know of the build-dep apt-get to install the dependencies for building [04:36] what are you trying to install? [04:36] flaccid: vmware from the official vmware website [04:36] what is the dep? [04:36] <_2> NightBird sudo apt-get install package ;sudo apt-get remove package <<< it will install package and all it's deps but then remove package and leave the deps [04:36] okay [04:37] um i don't think that will work unless the pkg is meta === seriuhfr is now known as Mimi [04:38] <_2> flaccid well there "might" be a dependancy loop but most often there isn't [04:38] Are there any programs that can be used to try to read a DVD or CD repeatedly? What I mean is retry reading if the first read fails. [04:38] <_2> if pkg depends on libpkg and libpkg depends on pkg then it gets ugly [04:40] <_2> setuid_w00t you mean like until cp -a /media/cdrom . ;do : ;done ??? [04:41] _2: but won't that restart the entire copy if one block fails? [04:41] <_2> setuid_w00t yep but man cp and look at the -a switch [04:42] <_2> setuid_w00t that would not work for an audio CD of course [04:42] _2: I don't think that's what I'm looking for [04:43] I want the program to retry on each failed block, not retry the entire copy. [04:44] hey [04:44] <_2> oh forgot the u sorry. -au my bad [04:44] i have no window decorations and i cant type in applications [04:44] this happened after a Qt update [04:46] hola q tal [04:46] alguien q me ayude [04:46] por aqui [04:50] <_2> !es | josue [04:50] josue: Aquí solamente hablamos inglés. Para Español, por favor entre en los canales #ubuntu-es o #kubuntu-es - allí obtendrá más ayuda. [04:50] <_2> oops [04:50] has anyone gotten korganizer (kontact) to sync with google calendar [04:51] <[Relic]> thinking the coretemp module isn't loading properly for some reason, which is why the core temps never show up === luis_ is now known as tigremx [05:14] <_2> which will take precedance ? .dmrc or .xinitrc ? === lain_ is now known as dwidmann [05:37] hi guys i have a BIIIIG problem... :/ i tryed to login kubuntu and it took too long to load and after loading and insert the password everything went white and i only could see the mouse pointer... i also could rotate cube desktop which show me that everything was white :/ is this the blue screen of linux?:P can anyone help me plz? [05:44] is anyone here? [05:44] como entro a #kubuntu-es?? [05:45] #kubuntu-es [05:45] oramaq, "/join #kubuntu-es", pero sin "" [05:46] tanks [05:56] hi, would anyone here happen to have Qt 4.4 on their systems? [06:16] <_2> then the internet died ! [06:19] :( === spem1 is now known as speme [06:22] <_2> this is a strange message " your computer seems to hace a partial ACPI installation; ACIP was probably enabled, but some of the sub-options were not. - you need to enabel at least 'AC Adapter' and 'control method battery' and then rebuild your kernel." [06:22] <_2> window title "configure - kde control module" [06:23] <_2> it's a ubuntu kernel, i didn't build it. ^ [06:23] _2: what submenu of kcontrol does show it? [06:24] <_2> no. [06:24] what -> isn't a yes/no question ;) [06:24] where do you see that [06:24] and that's not a yes/no question either ;) [06:25] <_2> uga not in kcontrol so how can i answer but "no" [06:25] _2: your title reads "configure - kde control module" [06:25] <_2> like i said the window title "configure - kde control module" [06:25] that's a kcontrol module (kcm) =( [06:25] =) [06:25] _2: which of the kde control modules [06:26] <_2> that one ^ [06:26] <_2> :) [06:26] _2: what steps do you follow to run it [06:26] <_2> just a minute and i'll do a ps to see [06:26] no! not a ps [06:26] sigh [06:26] _2: what do you click to reach there [06:26] ps will only say kcontrol [06:27] need help!!! i cant fix my kubuntu and i am about to reinstal it :/ [06:27] <_2> kcmshell laptop [06:27] i went to login as always and i got white screen [06:27] <_2> doesn't say kcontrol anywhere [06:27] _2: okay, see? it' sa kcontrol module =) [06:27] kcm == kcontrol module [06:28] <_2> laptop [06:28] <_2> that's what you asked for. [06:28] _2: you can reach that through kcontrol->power control->laptop [06:28] yes [06:28] _2: same issue here. But it might only be because acpi module doesn't support part of your features [06:28] this is a desktop and thus doesn't offer certain capabilities [06:29] _2: I'd suggest asking at #kubuntu-devel if those features were included or not in-kernel [06:29] <_2> more likely that something wasn't running [06:29] how can i stop compiz without logging in? [06:29] _2: no, those are in-kernel features [06:29] kde will try accessing them through /proc/acpi [06:30] but some of them are obviously unavailable since the kernel doesn't support part of the acpi features in that board [06:30] that's a very common thing [06:30] <_2> uga don't NO at me. yes. it worked before i deleted all the links in the /etc/rc7.d/ and /etc/rcS.d/ [06:30] <_2> so it is more likely that something wasn't running [06:30] _2: NO, I hate users that don't believe developers [06:31] cya guy, enjoy yer time coding ;) === uga is now known as uga|away === ubuntu__ is now known as frybye [06:31] _2: btw, yes, you did a very stupid thing by removing system services, that got NOTHING to do with your problem [06:31] level 7 services btw [06:32] <_2> i've been called worse by better. [06:32] no wonder =)) [06:32] Hi all - I am running the hardy-herron live dvd - so I cant save any changes right?? [06:33] seems to work pretty good though .. heheh [06:33] sun java 6 is hanging my adept installer up [06:34] http://img297.imageshack.us/img297/883/av1894tg1.gif [06:34] how can i take it out of my up grade package? [06:34] bloodboy - what is that image all about??? [06:34] yourmom [06:35] bloodb - u sure you are playing in the right back-yard??? [06:35] i play in every backyard i want to [06:35] ok guy,s i could use a little help [06:36] !language | bloodboy [06:36] bloodboy: Please watch your language and topic to help keep this channel family friendly. [06:36] that goes for pics too [06:36] cool Jucato... [06:36] hey jucato [06:37] hey [06:37] rickey.. I would be happy to try and help but am a newbie so not much clue... [06:37] i am new too [06:37] and I have to head off to work now - c u folks.. bye... [06:37] !aptfix | rickey [06:37] rickey: If an APT front-end crashed and your database is locked, try this in a !terminal: « sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a » [06:38] jucato this is a little different [06:39] the same file crashes over and over i need to remove it [06:39] sun java 6 is hanging my adept installer up <--- it's probably because of the license agreement [06:39] how do i fix that? [06:39] with the command the bot gave :) [06:40] how do i configure java settings in kubuntu? [06:41] <_2> uga|away all working now. so the message obviously makes too many asumptions and is thus imprecise. but thanks anyway. [06:41] wht do ppl that are so-called informed keep telling me MS is a standard when it isn't? [06:42] idiots [06:42] ms is yeaterday [06:42] and offtopic is last year and in #kubuntu-offtopic :) [06:42] lol... [06:42] aye boss [06:42] i wont do this again, but what dose this mean [06:43] <_2> dsmith_ heh i saw a quit message eariler "when M$ makes something that doesn't suck, it will be a vacume cleaner" [06:43] rickey@home:~$ sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a [06:43] [sudo] password for rickey: [06:43] USER PID ACCESS COMMAND [06:43] /var/lib/dpkg/lock: root 6423 F.... dpkg [06:43] Kill process 6423 ? (y/N) n [06:43] dpkg: status database area is locked by another process [06:43] rickey@home:~$ [06:43] _2: lol [06:44] !paste | rickey [06:44] rickey: pastebin is a service to post multiple-lined texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu.com (make sure you give us the URL for your paste - see also the channel topic) [06:44] rickey: the first part is supposed to unlock the database, while the 2nd part of the command is to try to continue what it was trying to install or update [06:47] http://paste.ubuntu.com/13419/ [06:47] rickey: I already answered you [06:47] you're supposed to say 'y' [06:48] as you can see another prosess is stoping it [06:48] otherwise it won't be able to do what it's supposed to do [06:48] how do i fix that prosess [06:48] that's why you're supposed to say 'y' (YES, kill that process) [06:48] by saying 'y'! [06:48] heya; i've got an mp4 player thingy connected to the pc via USB (using kubuntu hardy and kde4) and i get no 'new device' notification. How can i browse the player's memory? [06:49] ok [06:49] * jussi01 shows DreadKnight the way to #kubuntu-kde4 :) [06:50] jussi01: i should be a generic ubuntu issue actually :P [06:50] it* [06:52] http://paste.ubuntu.com/13420/ [06:53] so what could i do about this [06:53] rickey: sudo apt-get install -f [06:58] rickey: for pasting just a single line, it's ok to paste it in here. but for more than 2 lines, use the pastebin [07:02] http://paste.ubuntu.com/13422/ [07:02] wen i click on ok nothing happeneds [07:03] rickey: press tab then enter [07:03] rickey: you can't click it. press Tab to highligh the "button" then press Enter or Space [07:03] jussi01: your turn :P [07:03] * Jucato is awaaaaaaaaaay *yawn* [07:08] <_2> whooops i just did one of those "never do this/s" i disabled the streach feature of the short screen display on the lappy with a vga mode set to 100x37 which means that the console only displays in the very center of the screen and the fonts are unreadable ;/ [07:10] <_2> same number of columns same number of rows, they just look like a postage stamp in the middle of the lcd [07:14] <_2> heh it's still screwy, i changed it back and it fixed everything in linux but the boot splash is moved to 0,0 rather than streched ;/ [07:15] <_2> err sorry boot splash may not be the proper name. the image that the boot menu is on. is that a boot splash too ? [07:15] boot menu? grub/lilosplash [07:16] <_2> lilo it's not an image that is seen after the kernel starts to load only at the menu of os's [07:16] <_2> lilo splash you say is the proper name ? [07:16] yeah. in GRUB, it would be the backdrop of the GRUB menu choices, grubsplash [07:17] <_2> k i'll make a note [07:18] <_2> are images interchangable between grubsplash and lilosplash ? they are probably both printing raw to the display ? [07:19] I think so. afaik grub just uses .xpm.gz [07:20] <_2> can be .gz doesn't have to be [07:20] <_2> they are small files [07:21] <_2> hmmm lilo is using a "PC bitmap data, Windows 3.x format, 640 x 480 x 8 " [07:22] .bmp? :) [07:25] <_2> yeah [07:25] <_2> so maybe they are not interchangable [07:26] <_2> grub is image/x-xpmi 7bit [07:27] <_2> well file name doesn't matter of course you could name the lilosplash file bob and the system would never know the differance but yeah it's M$.bmp format [07:28] <_2> i'd play with that some more but i don't have anything with grub on it now. [07:36] <_2> you know i don't think i have ever seen the sun java license [07:37] <_2> not that i want to. [07:38] <_2> that pastebin was the first time i have see the header of it i think [07:59] <_2> what is the dpkg-reconfigure package to set whether the hwclock is local or utc ? [07:59] Hola at the ubuntu guys :) [08:00] how do i install all the debs in a folder automatically? i have about a hundred of them [08:01] <_2> for q in * ;do dpkg -i $q ;apt-get install -f ;done [08:02] <_2> you will see many errors. but if all goes right they will all work themselves out. [08:03] _2, dpkg-reconfigure tzdata [08:03] i dont get it. say i want to install all the packages in /home/dell/deb .what would the command be? [08:03] <_2> ty p_quarles [08:04] <_2> woops /scripts/dpkg-reconfigure: tzdata is not installed [08:05] <_2> hmmm not installed here either /usr/sbin/dpkg-reconfigure: tzdata is not installed [08:05] _2: did you see my question above? [08:06] sigma_1234: sudo dpkg -i * /home/dell/deb/*deb [08:06] <_2> sigma_1234 cd /home/dell/deb and run that ^ [08:06] don't need to cd [08:06] <_2> flaccid for the loop i posted he would. [08:07] <_2> for your aproach no. [08:07] ok [08:07] <_2> i think we were typing at the same time flaccid :) [08:09] haha [08:09] flaccid: so by using those *'s it will install all the folders content? [08:09] <_2> sigma_1234 * is a wildcard [08:09] it will install all deb files in that folder [08:10] <_2> echo * [08:11] <_2> or for an example of the asterisks in flaccid's command echo * /home/dell/deb/*deb [08:11] dam if only i knew that. ive been manually installing them up to now! [08:13] sigma_1234, it's better to use apt, of course -- installing a bunch of independent .deb packages all at once has a high chance of breaking things [08:13] nah its not actually p_quarles. apt is a frontend to dpkg and dpkg won't let you install conflicts [08:14] <_2> sigma_1234 ? is also a wild card but it only matches one char where * matches full strings echo .ba??* and you will see anything in the present dir that begins with .ba and has at least two more chars [08:14] flaccid, this is true, but dpkg -i *.deb will take arguments in alphabetical order -- you could spend a lot of time trying to un-mess things up when the initial command doesn't work [08:15] apt will check for conflicts and dependencies of all target packages before actually configuring them [08:15] <_2> p_quarles that's what aptget install -f is for :) [08:16] _2, it's for intentionally breaking things? [08:16] this is more a logical question. and besides apt-get installs from repos. there is no repos here you would have to create one [08:16] <_2> debreaking [08:16] <_2> yes [08:17] <_2> deselect might be a good choice there [08:17] nope. this is the right. the way a vendor would do on a custom install cd for custom packages [08:18] hey all [08:20] hey ActionParsnip [08:21] is there a voice command software for KUbuntuthat accepts commands like play or play ? [08:22] ive seen maximise / minimise / next / close etc [08:22] <_2> play is a command comes in the sox package [08:22] with voice? [08:23] instead of typing [08:23] <_2> was just commenting that the "play" command exists. [08:23] _2: I am aware of play dude :) [08:24] <_2> if the voice recognition app can exec shell grammer then play should work. command play blah [08:24] thats kinda what Im after [08:25] like i'd say "play californication" and it would fire up the desired app and play the album [08:25] etc [08:29] Is it possible to append the current history to ~/.bash_history instead of replacing it? [08:30] hw: i thought it dod get appended [08:30] hw: to view your history use history in a konsole / yakuake or whatever you use [08:31] ActionParsnip: my tests a few minutes ago shows that it got replaced [08:32] hmm, let me websearch [08:34] hw: try echo $HISTFILESIZE [08:34] what do you get? [08:35] I get 50000 (not 500) [08:35] ok [08:35] I set tis value :) [08:35] +h [08:36] try rm .bash_history [08:36] close console [08:36] then reopen [08:36] do some tests [08:38] any good? [08:39] I did. The history of the previous closed terminals got lost. But man bash didn't help me either... === ronald is now known as frybye [08:40] hw: so you removed the cache file and its still the same [08:40] Still the same behavior [08:41] hmmm [08:41] Hi - you folks we be seeing a bit of me in the comming days.. I just installed hardy heron and am pretty clueless.. [08:43] welcome frybye [08:43] ActionParsnip: Thx for wasting your time... =) [08:43] hw: Once you have determined that a bug actually exists, mail a bug report [08:43] to bug-readline@gnu.org. If you have a fix, you are welcome to mail [08:43] that as well! [08:44] hw: if you make another user and log on as that does it happen for the new user? [08:44] Hi flaccid [08:44] howdy [08:45] tell me something .. can one assume that all software offered via adept actualiser etc.. is actually ok - or do malcontents put malware in there...? [08:45] frybye: yep you can assume that [08:45] frybye: should be ok imho [08:46] ActionParsnip: Might be a good idea... But I'm on my job and I can't invest more time... ;p [08:46] good.. I am just taking my first baby steps.. heheh Way back I used a different distro for a while... [08:46] frybye: what did you use? [08:46] oh jeez - cant remember right now.. something with "s" [08:47] suse, slackware [08:47] suse... [08:47] suse is nice, apt-get is like yum [08:48] flaccid - when I use the adept manager and ahve found a proggy I want to install - where do I need to click.. [08:48] frybye: on the pkg then request install then to apply, click apply changes [08:48] !adept | frybye [08:48] frybye: adept is the Kubuntu package manager. Howto: https://wiki.ubuntu.com/AdeptHowto [08:48] unfortunatly I have the german version running here and noone seems around in the kubuntu-de # [08:49] is there somebody here using exflaso for tagging ? [08:49] frybye: you can also bring up a konsole and type sudo apt-get install [08:49] right - bit at a loss cos of the language here.. i am a brit living in germany... [08:49] * ActionParsnip is a brit [08:50] i dont understand why cddb lookup doesn't give any answer rather than i have cddb plugin + python_musicbrainz installed [08:50] Hi action.. when I click on firefox 3 for instance it offers (in German-) delete change or details.. nothing with "install" [08:50] the button should say something like wenden Sie Änderungen an [08:50] ah ha - at the top is "aplly changes" so I click there.. [08:51] there are screenshots in the howto above for position of button [08:51] right that is up the top of the window - yeah?? [08:51] um have a look [08:52] I have looked at the howto - but that is quite different to what I have here.. hmmmm [08:52] actually its commit changes which is probably something like legen Sie Änderungen fest [08:53] it is now saying I should put the kubuntu cd in the drive - but I have the dvd and it does not seem happy with that... [08:53] !repos | frybye [08:53] frybye: The packages in Kubuntu are divided into various sections. See https://help.ubuntu.com/community/Repositories/Kubuntu - See https://wiki.ubuntu.com/RecommendedSources for the recommended way to set up your repositories [08:53] may i talking something [08:53] frybye: goto manage repositories from the Adept menu - you probably won't to change that to use internet repos [08:53] eRqzor: amarok can do it if you have it installed [08:54] !ask | apakabar [08:54] apakabar: Please don't ask to ask a question, ask the question (all on ONE line, so others can read and follow it easily). If anyone knows the answer they will most likely answer. :-) [08:54] ok - you are a star flaccid... heheh [08:54] np. but my deutsch is rusty.. [08:54] ActionParsnip: sure i'm using the best player :o, but i always tagged with exflaso i can try with amarok eventually :o [08:55] eRqzor: there is no "best player" it doesnt exist [08:55] ActionParsnip: but i preferer to tag before passing them in my collection [08:55] eRqzor: tag as you rip ;) [08:55] in there it says "server for Germany" but still wants the cd apparently.. i guess to get it from the cd and not unnecessarily load the server...? [08:56] ActionParsnip: for me it is, but there is no question about that, there is enough player for anybody (i use mpd to for remote playing) / thanks for tips - [08:56] np bro [08:58] hi [08:58] !hi | dsmith_ [08:58] dsmith_: Hi! Welcome to #kubuntu! [08:58] i moved the /home directory /mnt/home now I get a kstartupconfig msg [08:58] frybye: goto second tab in software sources (third party software) and uncheck cdrom [08:58] is that a chown issue? [08:58] flaccid - is there some way I can get adept manager to ignore cd (cos i dont have it - it is asking for the amd64 cd and i have a dvd...) and only get from .. ok i c n ow.. [08:59] cool [08:59] it is updating the list now... [08:59] sweet [08:59] fstab is conf. correctly [08:59] i don't understand what you did dsmith_ [08:59] I seem to remember having this problem before, but I do not remeber what I did.. should have wrote it done [09:00] *down [09:00] heheh - you are a 5 star star .. eheh it is working... [09:00] mad thanks frybye [09:00] danke [09:00] flaccid: I moved /homne to /mnt/home its own partition [09:00] opened a different window .. installing and so on... [09:00] cp'd everytihgn over [09:00] edit fstab to reflect changes [09:00] it says it is installed.. so I go check in the k-menu right...? [09:01] dsmith_: make fstab mount the fs to /home or symlink /home to /mnt/home [09:01] frybye: depends what you were installing [09:01] hmmmm [09:01] how do you symlink? [09:02] it was the firefox 3 - what it has installed is the beta 5 - since yesterday there is a rc... hmmm [09:02] !symlink [09:02] The linux terminal or command-line interface is very powerful. Open a terminal via Applications -> Accessories -> Terminal (Gnome) or K-menu -> System -> Konsole (KDE). Guide: https://help.ubuntu.com/community/UsingTheTerminal [09:02] dsmith_: ln -s [09:02] I seem to remember reading some place that the updates will come autom...? [09:03] frybye: yeah. you just might want to make sure you have backports and propsed updates checked in software sources [09:03] eh - software sources.. ah in adept...ok hang on... [09:07] flaccid - didnt find the bit about backports?? [09:07] frybye: huh? [09:07] !backports [09:07] If new updated Ubuntu packages are built for an application, then they may go into Ubuntu Backports. See https://help.ubuntu.com/community/UbuntuBackports - See also !packaging [09:07] have changed the updates setting to accept pre-releases... [09:08] <_2> " suse is nice, apt-get is like yum" them there is fightin' words matey :) [09:08] cool [09:10] hey === wayne is now known as wayneandleanne [09:11] flaccid - how do i switch the default browser to ffox...? [09:12] (excuse me I was in the air force too long - the word please dont exist there.. sorry..) [09:12] frybye: system settings -> default applicatins -> web browser [09:17] anybody know how to enable dvd:rip to encode to x264 [09:22] flaccid - thanx again for all your help .. i will be playing with this a bit now... [09:23] sweet np frybye [09:23] good luck with the frybyes.. [09:23] thanx flaccid.. heheh [09:24] i was i was an aussie in germany atm :) [09:25] no one is halping me in #ubuntu so i figure I'll ask here since the two OS's are related: I'm trying to install Ubuntu but the built in partitioner won't detect the HD. I used an old win98 floppy to wipe the old partition (which would boot before I wiped it), I also made a new one (which is empty). I had tried installing before wiping the old partition as well and encountered the same problem. How do I make it detect it? [09:26] ah ha - I remember back when there was an aussi pie shop here in Berlin .. was a bit pricey but pies were ok heheh [09:26] no spitoons though.. which i remember from the oz pub in earls court in london... [09:26] Mantan: appears to be hardware problem/bios. i suggest trying the alternate cd. is it detecting in bios on boot? [09:26] yes [09:26] !alternate | Mantan [09:26] Mantan: The Alternate CD is a classical text-mode install CD. It supports a wider range of hardware than the !LiveCD, and can also be used as an upgrade CD. Look for the alternate checkbox on the Kubuntu download page - See also !minimal - Torrent at http://releases.ubuntu.com/kubuntu/8.04/kubuntu-8.04-alternate-i386.iso.torrent [09:28] k I'll try this. thx [09:28] Mantan: what type of hdd [09:28] flaccid - dosent accept pms from me.. how/where should i register...? [09:28] frybye: /msg nickserv help register [09:28] * JoshOvki is watching the ubuntu channel and people seem less happy than here [09:29] hehe [09:30] flaccid: it's 120 gig western digital === vr081900 is now known as vr081900_ [09:30] Mantan: what type, ata, sata, pata, scsi etc. ? [09:30] otherwise I have no idea [09:30] np [09:31] how do I find this out? [09:31] Mantan: do you know what the plug looks like? or was it in your pc when you got it? [09:31] should it just be on the HD somewhere [09:32] flaccid - seems to have worked with the registrering... will see now what happens when I go off and come back hehe [09:32] the machine itself is a pentium 3 [09:32] i gotta go, gotta retake me outdoor safty inc mountin rescue test [09:32] been 5 years already [09:33] catch ya all later [09:33] and the two cables attached to it are a wide grey one [09:33] Mantan: thats IDE then [09:33] yes [09:33] well ide is a lot of types. [09:33] IDE I had forgotten what it was called [09:33] its ata ide most likely [09:34] sata is ide as well as well as most of the drives === ronald is now known as frybye [09:34] anyway point is, no extra setup required like scsi/raid [09:34] k [09:34] re all... [09:34] frybye: you just need to /msg nickserv identify password [09:34] flaccid i did it - worked... [09:35] getting better by the minute.. hehe [09:35] nice [09:35] I remember that with suse (v10 if i remember right...) things were pretty complex.. here not so bad... [09:36] flaccid - so you are back in oz now...? (eh - ist this too off-topic?) [09:36] ah ha - can do a pm now i guess.. [09:36] why are my keyboard shortcuts all fubar in kde? alt-f1 and alt-f2 do nothing [09:37] yeah ot. we might get whipped by Jucato if we do OT :) [09:37] mephistofun: check the shortcuts in system settings [09:37] !ot > frybye [09:38] they are set correctly [09:38] mephistofun: not sure. could try #kde . also make sure you don't have a f-lock key on your k/b preventing those shortcuts [09:39] flaccid: right you are [09:40] :) [09:41] mephistofun: KDE 3 or 4? [09:41] 3 and 4... neither one has any of the 'useful' keyboard shortcuts like alt-f2 [09:41] but they work in gnome [09:41] huh? [09:41] ctrl-esc works, as does ctrl-alt-l [09:41] Alt+F2 -> Run Command... that works in both 3 and 4 === JanMalte_ is now known as JanMalte [09:42] mephistofun: Do you have a F Lock key? [09:42] yes, but on my system they don't do anything [09:42] no, its a standard keyboard [09:42] desktop keyboard [09:42] weird... [09:42] In System Settings > Keyboard & Mouse > Keyboard Shortcuts, are the shortcuts actually set? [09:42] Alt+F1 is "Launch K Menu" in KDE 3 (nothing in KDE 4) [09:43] yes "RUN COMMAND -> Alt-F2" [09:43] under krunner [09:43] i'm in kde4 right now [09:43] could it possibly have something to do with compiz fusion [09:43] You're running Compiz and KDE4? [09:43] yeah [09:43] oh that would explain it [09:43] well it doesnt work in kde3 either [09:44] as i said earlier [09:44] mephistofun: help is in #kubuntu-kde4 and #compiz-fusion [09:44] hah [09:44] Compiz Fusion would conflict with KDE's shortcuts [09:44] I would have thought that since most shortcuts are provided by Kwin, Compiz would get in the way. [09:44] fine i will disable compiz fusion and go back to kde3.. then will you be able to help [09:44] mephistofun: create a new user and see if it works. if it does you know its in the user profile config somewhere [09:44] mephistofun: in KDE 3, you're not using Compiz Fusion? [09:44] yes, but i can disable it by changing to kwin, right? [09:45] and i have compiz in gnome, too... but alt-f2 works there [09:45] ok i'll try creating a new user [09:49] guys, i cant seem to listen to my audio. [09:49] says my audio device is in use. [09:49] how do i find out which program is using it? [09:53] <_2> can you not pipe into an internal function in a script ? [09:56] <_2> shell script fungtion STACK() ;;; echo something | STACK ; ? [09:56] <_2> function maybe [09:56] You can see what program is using a file/dev with lsof something like this: lsof /dev/snd/controlC0 [09:56] <_2> eatThisAndDie fuse ? [09:56] hi i did autoremove to fix something and now i cant see window borders system tray icons etc can anyone help me? [09:57] <_2> !adeptfix [09:57] <_2> example usage ^ [09:57] If an APT front-end crashed and your database is locked, try this in a !terminal: « sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a » [09:57] fuse wat? [09:57] ubottu : are you talking to me? [09:57] petgrill: Error: I am only a bot, please don't think I'm intelligent :) [09:59] <_2> fuser i mean. [10:00] i did autoremove and now everything is messed up does anyone know how to fix this? [10:02] i am a newbie [10:02] jonorland: thx that worked! [10:02] Your welcome [10:04] <_2> petgrill sudo apt-get install kubuntu-desktop -f === ubuntu_ is now known as presto [10:08] _2 i did sudo apt-get install kde just before you said this and now i can use your command :/ [10:08] im distro hopping right now looking for the ultimate kde distro any input on kubuntu vs opensuse or mandriva [10:10] eatThisAndDie: how did you go? [10:12] <_2> petgrill sure. but it's not really needed. one or the other kde or kubuntu-desktop but both is kinda overkill wont hurt anything tho. [10:13] not really. kubuntu-desktop is a meta package depending on the base kde packages [10:13] any thoughts anyone? [10:13] <_2> presto yeah mandriva has always been kde based [10:13] if you install kubuntu-desktop, you have kde [10:13] well pc-bsd kills them all :) [10:14] <_2> flaccid and kde is a meta package depending on the base kde package too [10:15] <_2> flaccid you did see what his issue was didn't you [10:17] !info kde [10:17] kde (source: meta-kde): the K Desktop Environment official modules. In component universe, is optional. Version 5:47 (hardy), package size 7 kB, installed size 40 kB [10:17] <_2> [Lag 81] never saw it that high before [10:17] ah ok thats changed sorry [10:17] window borders because of autoremove? [10:18] <_2> not sense hoary it hasn't [10:18] well i personally don't install base/minimal kde always the full desktop so thats why i hadn't noticed the change... [10:19] !info kde-core [10:19] kde-core (source: meta-kde): the K Desktop Environment core modules. In component main, is optional. Version 5:47 (hardy), package size 7 kB, installed size 40 kB [10:19] ah even thats meta ok np [10:19] <_2> and kicker he said "remember i'm lagging" [10:19] someone convince me kubuntu is the best kde, im horrible when it comes to decisions [10:19] <_2> then you install "kde" ? ^ [10:19] hmm i text search that can't find it sorry [10:20] presto: like i said pc-bsd is. but that is freebsd not linux. [10:20] !best [10:20] Usually, there is no single "best" application to perform a given task. It's up to you to choose, depending on your preferences, features you require, and other factors. Do NOT take polls in the channel. If you insist on getting people's opinions, ask BestBot in #ubuntu-bots. [10:20] there is also that to consider ^ [10:21] <_2> or do you mean that you normally install only part of kde, the part that comes with the kubuntu-desktop ? [10:22] i just do the kubuntu-desktop then the additional packages as per how kde divides it up eg. kde-multimedia [10:22] core just aint enough heh [10:23] hello, is there a "direct" way to make hardy install on an encrypted root partition? [10:24] * _2 notes that the meta package "kde" installs more kde than the meta package "kubuntu-desktop" incase anyone didn't know it yet. now they do. [10:25] <_2> and some fellow told me this wasn't an information channel [10:26] <_2> oh disk encryption i haven't played with that yet... i need to learn about that [10:26] i want to reinstall anyway, so best time to plan this :) [10:26] there are some tutorials but those seem outdated (found some for 6.06) [10:28] also it might be bad to use a vanilla hardy installation due to openssl insanity...?! [10:28] * _2 is using 6.6 [10:29] I run Kubuntu 8.04 on a Intel Q9300 proc [10:29] But kubuntu says my proc has 3MB L2 cache instead of 4MB L2 cache [10:29] Is this normal? and how can I change it so it will recognise 4MB L2 cache? [10:29] <_2> is openssl insain in hardy ? [10:29] kunim: afaik encrypted fs is only available in the installer of the alternate cd. its fine to use hardy. i don't know what this openssl insanity could be [10:30] flaccid: read the news, openssl created bad keys under debian/ubuntu... :P [10:31] and if i use the alternate installer i can not do a "dist-upgrade" to get the new version... [10:31] so i wonder how dm-crypt uses ssl if at all.. [10:31] kunim: um link me to the news please. [10:32] flaccid: http://wiki.debian.org/SSLkeys [10:32] <_2> kunim it's customary to post a url with such things ;/ [10:32] man i though everybody knew about this :O [10:32] why would they [10:33] kunim: thats not news. thats the debian wiki. [10:33] flaccid: because it hit all major tech sites for quite a few days :) [10:33] <_2> so i wonder how dm-crypt uses ssl if at all.. < probably only in making the keys [10:33] kunim: then show us. don't link me to documentation. [10:33] * _2 seldom uses any ssl anything [10:34] flaccid: http://www.ubuntu.com/usn/usn-612-1 .. http://news.google.com/news?q=openssl+debian [10:34] http://ftp.uni-kl.de/pub/linux/ubuntu.iso/kubuntu/hardy/ red headline [10:35] <_2> "did slashdot say it was fud?" [10:35] i don't see what this has to do with fs encryption [10:35] flaccid: because ssl creates weak keys [10:35] and if dm-crypt creates it's initial keys they might be weak [10:35] <_2> that was supposed to be a joke. ^ [10:36] kunim: fs encryption is done with ssl? [10:36] for key generation? i don't know, that's why i ask.. [10:36] im trying to find info on it. i doubt it uses ssl but i could be wrong. i thought it was encFS but i havnt tried it yet... [10:36] guys,i have a problem with file sharing using samba, I shared a folder, windows users can see it but cant get ? Why? [10:37] hmm encfs is ssl [10:37] kunim: ok so there is a low risk vunl here. but its still a vunl. choice is yours [10:37] LOW? [10:37] i can't find any information to clarify what the encrypted filesystem feature introduced in hardy is.. [10:38] Hello. I have two soundcards: the onboard RealTek and Audigy 4 in the PCI slot. Looks like all the output goes through RealTek. How to set Audigy as a default soundcard? [10:38] kunim: it depends on the physical access to the machine. note that the fixes have already been released so if you update after install its not an issue at all. http://blogs.techrepublic.com.com/opensource/?p=210 [10:39] guys,i have a problem with file sharing using samba, I shared a folder, windows users can see it but cant get in [10:39] flaccid: when i install on a root system i do not get the updates.... [10:39] and fs encryption is ONLY about physical access.. [10:39] kunim: um you need to enable the repos with the updates first i would say [10:39] but i cant do that on the alternate installer [10:39] ah yes but if you get the update and then update keys then there surely cannot be a vunl [10:39] and thats the one supporting encrypted rootfs [10:40] um [10:40] the updates are released! [10:40] whats the problem [10:40] updated boot cds? [10:41] if you are sitting front of the machine you only have to worry about physical violence before doing the updates.. [10:41] no. in the repos. [10:41] hey,guys,who can help me with samba - it's a little problem, pleeeeease.... ((( [10:41] aaaaand if i update, then i have to re-encrypt the whole drive? [10:42] <_2> flaccid you can update the key to the fs encription after you install ? [10:42] <_2> kunim actually you could update he installce first. [10:42] <_2> install CD first [10:42] i don't think so, just key update [10:42] i think you can update the key etc. but i could be wrong once again because i havnt used it yet [10:43] i guess making a non-broken install-cd is the best way to go.. [10:43] whatever that is.. [10:43] a alternate install cd with sane openssl libs [10:43] How to choose default souncard between two existent? [10:44] <_2> [Lag 145] [O/0 N/325 I/0 V/0 F/0] <<< o.O [10:45] kunim: it could be as simple as reconfiguring the package which runs a script. but i can't find any documentation on it [10:45] flaccid: i can't image it's that simple... [10:45] see man encfs and also the doco online [10:46] image? [10:46] !doesntwork [10:46] Doesn't work is a strong statement. Does it sit on the couch all day? Does it want more money? Is it on IRC all the time? Please be specific! Examples of what doesn't work tend to help too. [10:46] imagine .. [10:48] lol @ dosesntwork [10:48] back. === fildo\a is now known as fildo [10:48] imagine what? [10:49] that i can exchange the keys for an already encrypted device afterwards without reencrypting everything etc. [10:49] kunim: i can't find anything on changing keys as encfs as limited doco so i dont know if its possible [10:49] coder2 asoundconf but i don't remember exactly [10:49] it should be possible, it might take time but its possible. whether they have that feature yet, i can't confirm... [10:50] i never said it where impossible [10:50] i know that [10:50] kunim: http://www.kde-apps.org/content/show.php?content=54078 and http://xlife.zuavra.net/index.php/66/#encfs-disadvantages might give some info [10:50] but instead of having a sane installation in the first place it's not "simple".. [10:50] there is nothing simple about encryption. [10:51] and this is a new feature [10:51] when a vuln is identified and there is a caveat like this, don't expect a simple solution [10:51] also i want to use dm-crypt not encfs, as encfs does not allow root fs encryption afaik [10:52] flaccid: simple solution -> update the installer cds.. [10:52] !info encfs dapper [10:52] encfs (source: encfs): encrypted virtual filesystem. In component universe, is optional. Version 1.3.2-1-1 (hardy), package size 261 kB, installed size 1136 kB [10:52] kunim: thats not simple. the release cycle is not changeable. [10:52] sure it is... [10:53] in theory yes, in practice with the project im not so sure.. [10:53] it's not to release hardy+1 but hardy-fixed [10:53] I have GB keyboard set in HH - but the ctrl button no loner works? keyboard is fine [10:54] kunim: just another fyi link https://wiki.ubuntu.com/EncryptedFilesystems . there has never been a dodgy -fixed released with ubuntu for one singular vuln or anything afaik [10:54] !info cryptsetup dapper [10:54] cryptsetup (source: cryptsetup): configures encrypted block devices. In component main, is optional. Version 2:1.0.5-2ubuntu12 (hardy), package size 86 kB, installed size 404 kB [10:54] if you are on dapper lts then maybe you should give canonical a call.. [10:54] or were you on hardy [10:55] # surabaya [10:56] dc2447 showkeys in a terminal and press/release the ctrl key [10:57] oops showkey [10:57] no trailing s [10:57] Couldnt get a file descriptor referring to the console [10:58] that will tell us if the hardware is bad or if the key just got remapped [10:58] yeah i get that too [10:58] ? [10:59] what kind of bug is that ? [10:59] no idea [11:00] you do have /dev/console ? [11:00] /dev/console: character special (5/1) [11:00] and /dev/fd [11:01] /dev/fd: symbolic link to `/proc/self/fd' [11:01] i thought if it goes to console for stdin it would be interactive mode but hey i have no idea with this binary.. [11:02] hmmm then the bug doesn't look like it's lowlevel something kde is hosing ? [11:02] i guess we don't know. !google and !bugs :) [11:03] ah -:- CTCP PING reply from Agent_bob: 0.755 seconds lags over [11:03] eg. http://ubuntuforums.org/showthread.php?t=109377 and http://www.google.com/search?client=opera&rls=en&q=Couldnt+get+a+file+descriptor+referring+to+the+console+showkey&sourceid=opera&ie=utf-8&oe=utf-8 [11:03] and tinyurl has it's place... [11:03] actually http://www.arthaey.com/tech/support/#Error Messages7 [11:04] Agent_bob: tinyurl is no substitution for a bad URI scheme [11:04] true. [11:04] Agent_bob: thank you. [11:04] Agent_bob: sorry i guess i meant a 'good' uri scheme. see the article 'cool uris never change' by tim [11:04] the above link shows why. run it in a tty. [11:04] coder2 what did i do this time ? [11:05] hey everyone i need to know how to install envy on Kubuntu? [11:05] !envy [11:05] envyng is an updated version of the *UNSUPPORTED* envy package. It is now part of the ubuntu universe repository and has community support. As an early version, its results may vary but this should be used over the unsupported envy package. [11:05] ok [11:06] Does anybody use skype in kubuntu? Can skype work with mic attahed to one device and headphones to another? Can skype work with alsa? Skype site provides contradictory information about it. I suspect the skype docs is out of date. [11:06] !skype [11:06] To install Skype on Ubuntu, see https://help.ubuntu.com/community/Skype - To record on Skype, check: https://wiki.ubuntu.com/SkypeRecordingHowto [11:07] I've read too many docs but it did not help. [11:08] unfortunately skype is closed and issues common [11:08] skype is not free [11:08] So no ways to make it working ? [11:08] coder2: ask skype - they made it closed source/commercial/prop. .. [11:08] where there is a will there might be a way [11:09] how would we know, its closed source so we have no idea :( [11:10] flaccid: I do not intend to participate in holy wars. I just try to move to linux desktop, but no success for a while... [11:10] ah man i get my console trashed everytime the net changes... http://ubuntu.pastebin.us/?show=d77e3f73b somebody know a command to block that from all but root ? [11:11] coder2: no worries. its the nature of closed software that has not given linux the required support as well :) [11:13] !free [11:13] freedom is important. Ubuntu is as free as we can make it, which means mostly free software. See http://www.gnu.org/philosophy/free-sw.html and http://www.ubuntu.com/ubuntu/licensing [11:13] Now I have problems with skype and TV-tuner. Earlier I had to get rid of compiz because it does not compatible with NetBeans IDE. And I've just broken through a very annoying problem with keyboard layout switching. [11:13] whats the problem [11:14] flaccid: Have you asked me? [11:14] i just did? [11:14] whats the problem with skype/tv-tuner? [11:16] flaccid: Skype does not hear microphone. I do not know which weird input to select, which microphone to select in kmix (I have only ove mic input really but the kmix shows at least 3 mic inputs) [11:17] what does that have to do with tv tuner? [11:18] problem is that with kmix/mixer channels/settings its derived from the driver of the audio card and i've never seen doco and what is what. i agree its confusing as and i believe inaccurate at times when i've compared to the same card on windows [11:19] flaccid: skype: nothing. Tuner is a separate problem. Sound from there is too quiet. I have to set marter volume to 100% and there is risk for my ears if some other app makes a sound [11:19] ah shoot [11:19] "master volume", sorry [11:20] um well problem is that like webcams there is no standard protocol for tv tuners and in terms of straight out video even /dev/dsp etc. is not followed most of the time. what are you using for tvtuner program and/or driver? [11:21] is there any reason why 4.0.4 isnt in intrepid but is in hardy? [11:22] cbr: #kubuntu-devel might be able to advise [11:24] flaccid: The TV-tuner is ComPro T300 (analog receiver), The only app that worked was kdeTV, if I'm not mistaken. I use analog loopback cable to hear at least anything, because I do not know how to hear sound from the onboard "digital in" device. And the tuner card was reconized automatically. [11:24] coder2: did you try tvtime? [11:24] !webcam [11:24] Instructions for using webcams with Ubuntu can be found at https://help.ubuntu.com/community/Webcam - Supported cams: https://wiki.ubuntu.com/HardwareSupportComponentsMultimediaWebCameras [11:24] !tvtuner [11:24] Factoid tvtuner not found [11:24] dang [11:26] Yes. TV time works. The same quiet sound though. And tvtime is too inconvenient. [11:26] well what channel is the audio cable plugged into? [11:26] Aux [11:26] and what vol is aux set at for input and output? [11:26] 100% [11:27] sounds like the hardware is not outputting enough gain for whatever reason [11:27] ie. dbs below line level [11:28] But It is very loud under Windows XP with its native ComPro DTV app [11:28] coder2: some soundcards have an extra "boost" option might be worth to look for it [11:28] maybe also try the console based alsamixer as kmixer tends to be broken for some cards [11:28] kmix [11:28] coder2: thats unfortunate, something is attenuating it somewhere [11:28] I think something is woing with TV-tuner firmware. I suspect that some firmware patch should be provided by the driver. [11:29] check alsamixer and kmix and um i don't know what else [11:29] i guess its possible [11:30] I suspect that the SAA7134HL chip has onboard sound gain control, but it is ignored by the linux driver [11:30] possible i guess [11:31] yo [11:31] then its a matter of getting in contact with devs of that driver. no idea how to find out who they are.. [11:31] By the way which TV-app can record videos? [11:33] coder2: you could try to use the latest cvs/hg version of v4l.. [11:34] coder2: http://www.linuxtv.org/v4lwiki/index.php/How_to_build_from_Mercurial [11:35] not sure it will help.... [11:35] !mythtv | coder2 [11:35] coder2: MythTV is a TV framework for Linux - Instructions for using with Ubuntu at https://help.ubuntu.com/community/MythTV [11:36] kunim_: I'm very new to kubuntu. I worked with RHEL/Fedora/CentOS before (only as a server platforms). I am not so brave yet to re-build the ubuntu kernel. I suspect that it may cause problems at least with NVidia driver. [11:36] And any ideas how to deal with mic in skype? By the way before kubuntu I've tried CentOS and skype worked there somehow. But kubuntu looks more attractive for me as a desktop OS. [11:36] coder2: you only build the modules, not a whole new kernel [11:37] MythTV is obliuos overhead for me. I've tried it but it is too complex and its GUI is unusable I think. It even hidesmouse cursor [11:37] ah well thats too bad [11:38] hey can anyone tell me why once i've uninstalled and reinstalled the NVIDIA driver with envy my screen still remains on 640x420 resolution!? [11:38] coder2: http://www.linuxtv.org/v4lwiki/index.php/TV_Recording <- maybe look at the list (the v4l wiki is quite good btw) [11:39] mattycoze: because envy is bad. [11:39] kunim_: Looks like XDTV is broken [11:39] flaccid... yeah well it's all i have :( [11:39] VLC has no channel setup [11:39] mattycoze: change the resolution in system settings. if that doesn't work then maybe it stuffed something [11:40] mattycoze: its not required. kubuntu has hardware drivers manager. [11:40] coder2: have you looked at kaffeine? [11:40] its missing in the list as it seems [11:41] ah it's at the "viewing" side.. but it can also timed record [11:41] just no tv guide integration etc.. [11:41] ohh okay [11:41] flaccid i think i've ticked the box and it seems to be installing the drivers via Adept [11:41] ... is Adept like better than synaptic? [11:41] !adept [11:41] adept is the Kubuntu package manager. Howto: https://wiki.ubuntu.com/AdeptHowto [11:41] yes [11:42] !best [11:42] kunim_: Yes. But I can't see an interface to tune channels in kaffeine. Sorry, I'll be back in 10 mimutes [11:42] Usually, there is no single "best" application to perform a given task. It's up to you to choose, depending on your preferences, features you require, and other factors. Do NOT take polls in the channel. If you insist on getting people's opinions, ask BestBot in #ubuntu-bots. [11:42] flaccid what makes it so much better? [11:42] see above mattycoze [11:42] synaptic is not native to kubuntu so we do not support it as much as adept [11:43] flaccid fair enough; [11:43] brb [11:44] hoi === anne is now known as gabel === gabel is now known as gabel_ [11:49] hi all [11:49] can someone help me with installing java? [11:50] adept wont let me do it [11:50] flaccid back. is there a way to reset the Xorg file? [11:50] mattycoze: which Xorg file, there are dozens. [11:50] !java | danny_ [11:50] danny_: To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository. Enable the backports repository on Edgy to install sun-java6-jre. Please don't use Adept to install Java if you are on Kubuntu 6.10 (Edgy) or earlier. [11:51] danny_: what does adept say is the problem/error? [11:51] flaccid; really? The one that looks after the screen resolution... [11:51] flaccid; i installed and activated the card... but still can't get the card in any higher resultion than 640x420 [11:52] mattycoze: you mean the config file? /etc/X11/xorg.conf ? [11:52] mattycoze: did you set the resolution in system settings? [11:52] i think that's what i mean. [11:52] yes i've tried setting the resolution settings; but it won't go any higher [11:52] it's weird... i accidentally changed the driver this afternoon and hasn't been right since; [11:53] whats make/model video card and please pastebin /etc/X11/xorg.conf [11:53] (tried changing it back of course) [11:53] okay [11:53] if you have a look at the comments in that file it will show you how to update it.. [11:54] flaccid; http://www.pastebin.org/37247 [11:55] flaccid - the adept installer says - "there was an error commiting changes. Possibily there was a problem downloading some packages or the cmmit would break packages". I hae multi universe enabled. [11:55] what resolution do you want... has to be compatible with your display ? [11:55] and i'll try find the make/model of the card [11:55] well my laptop poo poo'd on it's self again.... ;/ [11:55] it's something different to what i changed it to (the NVIDIA GeForce FX (generic) [11:55] back later . [11:55] danny_: goto konsole and run sudo apt-get update; sudo apt-get upgrade and advise the error please via pastebine [11:55] mattycoze: let us know what you want [11:56] flaccid; Geforce 8400M GS is what my gx card is [11:56] mattycoze: you have exactly one modeline with 640x480 - so thats the resolution you'll get ... [11:57] mattycoze: and what resoltion do you want and is compatible with the monitor.... problem is basically what kunim_ advised [11:57] yeah but that's not the point; the thing is i wanna get the right driver for my card (as I had before) so that i can get back up to the same resolution and performance I had before i made the stupid error [11:58] you already using the closed and fast "nvidia" driver.. [11:58] maybe it's enough to recreate the xorg file with the installer [11:58] flaccid - http://rafb.net/p/TuN7Wa57.html [11:59] i *think* omitting the modelines at all will make the driver try to detect the capabilities of the monitor.. [11:59] mattycoze: you are assuming too much. [11:59] *if* your edid info from your display is correct [11:59] !adeptfix | danny_ [11:59] danny_: If an APT front-end crashed and your database is locked, try this in a !terminal: « sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a » [12:01] flaccid; well thanks for your honesty. [12:01] ok that seeems to have worked flaccid, what do i do now to install java runtim [12:01] mattycoze: im still waiting for your desired res. otherise i can't give you what you need [12:01] !java | danny_ [12:01] danny_: To install a Java compiler/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java5-jre from the !Multiverse repository. Enable the backports repository on Edgy to install sun-java6-jre. Please don't use Adept to install Java if you are on Kubuntu 6.10 (Edgy) or earlier. [12:02] mattycoze: try to remove the both modeline entries, restart X and use "kdesu nvidia-settings" to make your settings to xorg.conf if you want to go the "gui" way.. [12:02] otherwise you can use http://xtiming.sourceforge.net/ to create a custom modeline [12:02] (i.e. if your display gives broken information) [12:03] kunim_ unfortunately i'm gunna have to use the gui way; because i'm a noob (as you no doubt have realised) [12:03] the modeline entry I just delete and save right? [12:03] yes [12:03] flaccid - http://rafb.net/p/EGeS0s70.html [12:04] or better comment it with # .. but too late for that :/ [12:04] if you take out all resolutions you should be able to choose resolution, but thats not always the case. thats i why i asked for the resolution you wanted but never got a reply [12:04] yeah well he already restarted :) [12:04] danny_: sudo apt-get update; sudo apt-get -f install [12:05] but without the modelines it might work.. [12:05] not my problem. [12:05] flaccid you appear to be a legend [12:05] are you sure danny_? [12:05] ye [12:06] kunim_: TV is only entertainment, it is not so important But problem with skype really prevents me to move to kubuntu desktop. I have to talk with may colleagues via skype. [12:06] ok cool [12:06] it is suddenly installing 80mb of data [12:06] Need to get 30.7MB of archives. [12:06] After unpacking 87.1MB of additional disk space will be used. [12:06] coder2: you can select the input/output devices in the skype configuration... so what's the problem? [12:07] i'm sorry; the pc restarted [12:07] kunim_: I've tried every input from there, but no sound from the mic! [12:07] coder2: try to use alsamixer instead of kmix to control the input volume [12:08] coder2: open konsole and run "alsamixer" [12:08] coder2: then press [Tab] to switch to input devices [12:08] meh, reboot [12:09] coder2: use cursors to navigate and press [Space] to activate the appropiate mic channel and turn up the volume [12:09] kunim can't i just delete the xorg.conf file? [12:09] mattycoze: erm no.. not a good idea.. [12:09] mattycoze: back it up instead of delete [12:10] kunim_: I've taken a look on it. It is not more understandable then kmix. Weird labeled sliders occupy the whole screen width and there is no way to choose soundcard there. [12:10] oh :( well when you say delete the modeline i'm not sure what to delete [12:10] kunim_: just back it up, remove the modelines and try to use "kdesu nvidia-settings" .. [12:10] everwhere i see the 640x480? [12:10] mattycoze: remove; modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync [12:10] flaccid & saved [12:11] mattycoze: its in two sections [12:11] okay [12:11] coder2: well you can use alsamixer -c N where N is 0 ... n for your soundcard [12:11] mattycoze: if you let me know what res you want it can be hard coded... [12:11] coder2: and yes i agree, the channel names tend to be confusing for some cards [12:12] flaccid mate i have no idea what it was when i got it all sorted out last time [12:12] mattycoze: its a bit more than that. i'll make a new xorg.conf? whats the resolution you want (for the fifth time!) [12:12] mattycoze: what is the max resolution of the monitor you are using. google can let you know this... [12:12] kunim_: Thank you for your help. I'll do the next try a bit later. [12:13] i'll need to google it flaccid brb [12:13] bye guys! [12:14] mattycoze: if you find the resolution i can provide you a xorg.conf that will work. [12:14] flacid; quote google "The screen is gorgeous. It is wonderfully bright and clear, and provides a respectable 1280×800 " [12:14] mattycoze: or just let me know the size of the monitor and make/model.. [12:14] HP dv6000 [12:14] ok no worries [12:15] mattycoze: Modeline "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841 [12:15] mattycoze: you have multiple monitors? [12:16] ahh i experimented once with the HD Tv :p [12:16] right. well i've left your dual monitor setup even though i feel its not right [12:17] new xorg.conf is http://www.pastebin.org/37252 [12:17] okay then flaccid - [12:18] should i restart now? [12:19] mattycoze: logout to the login screen and select restart X server from dropdown. if it doesn't return then restore previous xorg.conf from command line and report log.. [12:19] return=work [12:20] k brb === _neversfelde is now known as neversfelde [12:29] hey flaccid [12:29] i think i installed java, but where would it be installed? [12:29] danny@danny-laptop:/$ whereis java [12:29] java: /usr/bin/java /etc/java /usr/share/java /usr/share/man/man1/java.1.gz [12:29] i need to add the plugin for firefox [12:29] you don't really need to know where it installed. it installs to a few locations anyway [12:29] that didn't work? [12:30] well its not working in firefox [12:31] did you restart it? [12:31] my java applets are not showing [12:31] i closed firefox and opened again [12:31] in about:plugins no plugins are listed [12:31] danny_: you need to install sun-java6-plugin [12:31] anybody would know a good gui for watching live your active connections? [12:31] (or some other version of it like icedtea-java7-plugin) [12:32] depending on the java you use [12:32] a bit like the 'active connections' panel in Firestarter [12:32] depends on the java danny_ is using [12:32] danny_: pastebin dpkg -l | grep -i java please [12:32] bentob0x: i aint seen an iptools equiv either, i'd like to know as well.. [12:33] would be nice to have something like the system monitor applet but for your network [12:33] maybe with a tray icon opening/closing the main panel [12:33] http://rafb.net/p/pBJsgz19.html [12:33] flaccid - http://rafb.net/p/pBJsgz19.html [12:34] danny_: so go with sun-java6-plugin [12:35] flaccid lol mmm [12:36] kunim - how do i know the package name? [12:36] danny_: i used "apt-cache search java | grep plugin" ;) [12:36] danny_: sudo apt-get update; sudo apt-get install sun-java6-plugin; killall firefox; firefox & [12:36] im a bit of a newb to linux lol [12:37] im having trouble getting a stream to play in amarok and i have libxine1 flac ffmpeg lame amarok engines [12:37] danny_: just run that command in konsole see how you go [12:37] ok thanks [12:37] except the stream says no decoder [12:37] flaccid: ...no if he only had not written this 100 page blog post in firefox without saving :P [12:37] still no plugins installed flaccid [12:38] it even happens to me on the cool stream [12:38] danny_: what do you mean [12:38] danny_: you need to install sun-java6-plugin [12:38] Package sun-java6-plugin is not available, but is referred to by another package. [12:38] oh [12:38] danny_: what release are you on [12:38] flaccid you wouldn't have a copy of my original xorg.conf would you? [12:38] release [12:38] whats the command to find out lol [12:38] oh d.w flaccid [12:39] sorry for been a nub [12:39] danny_: make sure you have enabled multiverse [12:39] repository [12:39] !version | danny_ [12:39] danny_: To find out what version of Ubuntu you have, type « lsb_release -a » in a !shell [12:39] yes i have [12:39] mattycoze: http://www.pastebin.org/37247 [12:39] !amarok [12:39] Amarok is an audio player for Linux with an intuitive interface. The latest version is 1.4.8 (1.4.3 for Dapper LTS). Packages are available for Kubuntu at www.kubuntu.org See https://help.ubuntu.com/community/Amarok [12:39] ok thats wrong lol [12:39] sok flaccid yeah i found it... [12:40] uber wrong lol [12:40] Release: 7.10 [12:40] gutsy [12:40] 1.4.9.1 [12:40] flaccid what you pasted did something strange; [12:40] mattycoze: wouldn't be suprised [12:40] flaccid: can u help me out im missing some mp3 decoder and i dont know which one [12:40] flaccid: i have libxine1 amarok-engines [12:41] ffmpeg flac lame [12:41] eagles0513875: local file or URI on internet? [12:41] !mp3 [12:41] For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats [12:41] lol; well - yeah, i was gunna try what kunim suggested initially but then i changed to your method [12:41] url even the cool streams that come with amarok 1.4.9.1 [12:41] danny_: sudo apt-cache search sun-java6-plugin please [12:41] lol fixed it [12:42] didnt have the libxine1-ffmepg [12:42] kunim can you re-send that instruction about changing the modeline [12:42] ok i did it [12:42] and nothing came up [12:42] eagles0513875: yep. just not that there is a bug in shoutcast servers ie. no demux plugin... [12:42] mattycoze: Modeline "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841 === kunim_ is now known as kunim [12:42] flaccid: i have gotten those sometimes [12:42] just double click on em again or let some time go bythen they work [12:42] okay kunim, i'll try that [12:42] mattycoze: quick solution is earch and replace the "640x480" with "1280x800" but if the syncs are the same it won't work... [12:43] sudo apt-cache search sun-java6-plugin = no result flaccid [12:43] eagles0513875: yeah. its an annoying thing i deal with everyday :( [12:43] !info sun-java6-plugin [12:43] sun-java6-plugin (source: sun-java6): The Java(TM) Plug-in, Java SE 6. In component multiverse, is optional. Version 6-06-0ubuntu1 (hardy), package size 1 kB, installed size 40 kB [12:43] danny_: do you have multiverse enabled? [12:43] flaccid - i haven't got another monitor connected yet [12:43] bbiab [12:43] whenever a copy operation is being performed, my hardy system gets really slow. Happens with nautilus and konqueror. Any fixes? [12:44] mattycoze: 2 options. do the search an replace like i said or i can do single monitor config for your [12:44] you [12:44] yes i think so [12:44] how do i double check flaccid [12:44] flaccid do the single monitor config [12:44] plz. [12:45] danny_: in adept - manage repositories. but because it didn't come up in the apt-cache you either didn't fetch updates or the repos is not enabled. [12:45] mattycoze: ok mate give me 5 [12:46] flaccid: make sure u have libxine1-ffmpeg installed that could be the cause [12:46] flaccid on adept, i clic kedit software sources. and all the boxes are crossed(x). multiuniverse, main, universe and restricted. [12:46] eagles0513875: nah its a shoutcast bug apparently. even though others claim its xine.. [12:46] danny_: fetch updates and then search in adept with string 'plugin' and see if sun java 6 plugin is there [12:47] flaccid: u have any idea what back bone amarok 2 will be using [12:47] eagles0513875: phonon [12:47] !phonon [12:47] Factoid phonon not found [12:47] !info phonon [12:47] Package phonon does not exist in hardy [12:48] flaccid: what is it cuz i was having trouble with 2 where i ended up having to install jack to get any audio to come out of my speakers [12:48] flaccid - there is no java 6 plugin, but there is a "Sun Java 5.0 plugin"(which is greyed out) and a Java 1.4 plugin. [12:49] How do i search for updates? [12:51] eagles0513875: no idea sorry. phonon is a sound system thats what it is [12:51] danny_: pastebin your /etc/apt/sources.list and also remind me of your release version [12:52] mattycoze: nearly there [12:52] ok [12:53] hello room [12:54] flaccid - http://rafb.net/p/zpqmuJ24.html [12:54] Kubuntu 7.10 _Gutsy [12:55] flaccid: later im at work [12:55] mattycoze: http://paste.ubuntu.com/13471/ try this one please [12:56] Hello. Does anyone know how to find out what ac_nonexistent.h could be and what carbon.h and audiounit.h are bundled with [12:56] danny_: if they are checked in adept then thats wrong. let me just make a correct sources.list for you [12:56] ok thanks mate! [12:57] kk hope this works; brb flaccid [12:58] flaccid: where is grub located [12:58] !grub [12:58] grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto [13:01] danny_: replace your sources.list with http://rafb.net/p/tIShZO56.html and then do a sudo apt-get update; sudo apt-get upgrade; sudo apt-get install sun-java6-plugin [13:01] replace the whole file with just that? [13:02] flaccid - replace the whole file with just that? [13:02] danny_: yep [13:02] cool [13:03] working ... :_ [13:04] hello, where to get the ncomputing Terminal software for ubuntu / Linux? [13:05] danny_: that worked? [13:05] its still downloadng lol [13:06] danny_: ok sweet as then [13:06] its on a language pack at the minute [13:06] well sweet until its verified [13:06] its eating away at my hard drive space :P [13:06] flaccid; yeah i think it's working lol [13:06] danny_: ya. that command will update your system before installing java [13:06] screen is the right size... looking good... some reason the pc thinks that the hardware is vesa [13:06] Ok [13:07] yeah its updating all the files [13:07] mattycoze: why do you say that? [13:07] i know a bit of linux from having a ssh shell [13:07] flaccid it says so under system settings --> monitor and display --> hardware [13:07] ive decided to give linux aother go, i got annoyed last time as i couldnt get my wireless broadcom working. [13:07] flaccid though the driver i'm using is nvidia [13:08] but really thanks for your help flaccid [13:08] i must say lots of updates [13:09] mattycoze: pastebin your /etc/X11/xorg.conf and /var/log/Xorg.0.log as they are once logged in with that config [13:09] okay brb [13:09] how old are you flaccid? [13:09] danny_: sorry about that. but i couldn't help myself... [13:09] you seem like a complete expert [13:09] * flaccid is 26 [13:09] hehe ok [13:09] from? [13:09] lol no im a scrubber compared to some [13:09] * flaccid looks at Jucato [13:09] hehe [13:09] im in sydney, australia [13:10] nice [13:10] thanks for the compliment however.. [13:11] im just happy im getting somewhere [13:11] i think i was here once before and was given no help at all [13:11] must be about a year ago now [13:11] we have some really good helpers [13:11] you might have come in at a dead time [13:12] more are always welcome [13:12] possibily [13:12] everyone here are volunteers, so we can only keep watch at our own free time... sucks.. but that's life :( [13:12] hehe the update is still running [13:13] is anyone here having any boot-up slowdowns on kubuntu 8.04 LTS (32 bit) since installing recent updates? [13:14] flaccid; http://www.pastebin.org/37264 & http://www.pastebin.org/37265 [13:14] am i right in beliving that the command is looking for updates for all my installed programs? [13:15] danny_: pretty much. its a good idea to let it do the updates, then it will install java then restart firefox for you [13:15] danny_: "sudo apt-get update" basically checks if there are stuff to update. "sudo apt-get upgrade" upgrades those that can be ugraded [13:16] the last command he gave was to install java [13:17] nice [13:18] flaccid is it bad? [13:18] erythrocyte: not that I've noticed. and btw, Kubuntu 8.04 isn't LTS [13:18] one sec [13:18] (but Ubuntu is) [13:19] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [13:19] mattycoze: yeah its on vesa. which release are you on? just need to run restricted manager or hardware drivers manager and enable the restricted driver [13:19] hey [13:19] jucato: Kubuntu actually comes in two flavors - LTS (KDE 3.5.9) and the KDE4 version [13:19] * Jucato is confused with the new xorg.conf... [13:19] i want to automount a truecrypt-volume, when my usb-device is attached [13:20] how can i do that? [13:20] erythrocyte: neither are LTS [13:20] Jucato: what is dapper sitting on kde version wise? [13:20] flaccid i'm on 8.04LTS, what i did was move to Kubuntu with synaptic the other day from the gnome environment [13:20] flaccid: tbh, I can't recall :) [13:20] ... i figured it would be something different [13:21] jucato: ok, i guess i wasn't aware of that :) [13:21] yeah kubuntu is not lts. a decision made by canonical as kde is in dev transition. [13:21] flaccid: KDE 3.5.2... [13:21] thanks Jucato [13:21] lol oh okay, didn't know htat [13:21] http://ubuntuforums.org/showthread.php?t=800878 [13:21] then i don't know [13:21] i'm having a painfully slow boot :( [13:22] flaccid: which is actually bull's droppings... hey, they shipped with Firefox 3 beta right? :) [13:22] (and pulseaudio...) [13:22] Junkato yeah they did that [13:22] trallalalal don't mind the ranting guy :) [13:22] and FF3b sucks :p [13:22] hehe well its official from jr/canonical but yeah hehe [13:23] flaccid i'll restart with the newly installed restricted driver for my gx card [13:23] brb [13:23] ok [13:23] flaccid: yeah it's the "official reason", but the reasoning is flawed.. but I'm going offtopic hahaha [13:23] * Jucato censors himself [13:23] jucato, flaccid: any ideas what could be causing my problem? [13:24] erythrocyte: not really. sorry... [13:24] jucato: np...thanks anyway [13:24] right.. back to work... :) [13:25] Jucato: i reckon is quite fair reason, but doesn't address the issues with legacy dapper being a current lts etc. but yeah /done. [13:27] fabian: you the host of linux outlaws :) ? ..man i love your show [13:27] flaccid ahh no fair :( something reset itself and i am now at 800x600 [13:29] mattycoze: that's failsafe. [13:29] mattycoze: try changing resolutions in system settings now [13:29] erythrocyte: ??? [13:29] mattycoze: what does cat /etc/X11/xorg.conf | grep -i nvidia return? [13:29] fabian: :) [13:30] erythrocyte: do i have to understand that? :D [13:30] flaccid: grep expression file [13:30] fabian: lol...never thought i'd bump into you on an IRC channel :) ...keep up the great work :) [13:31] jabba: its piped [13:31] flaccid; yeah that's the max and it's still on that vesa card; flaccid; i've pasted these xorg.conf and xorg.0.log files; http://www.pastebin.org/37270 & http://www.pastebin.org/37271; that command returns 'nvidia' [13:31] flaccid: correct. it does not need to be. [13:31] return is not part of the command sorry [13:31] * flaccid goes to look [13:31] lol i know. [13:32] flaccid: sorry, it's a pet peeve of mine. it used to be launching cat or cut or tr/sed used a lot of ram. [13:32] still going lol [13:32] erythrocyte: uuuuuuhm, maybe you mistake me for someone o.O [13:32] flaccid: but you can just say grep -i nvidia /var/log/... [13:33] mattycoze: problem is with the monitor not the video driver [13:33] fabian: oh... it's okay ... i thought you were fabian of http://linuxoutlaws.com/ ...they have a nice show btw :) [13:33] oh [13:33] jabba: very good point. i'll do that now thanks! [13:34] mattycoze: one sec. what resolution do you want. what monitor is it etc.? [13:34] hang on i'll have to check those specs... [13:34] flaccid: the other trick is grep -c to count matches instead of piping further to wc. so you'd say grep -c error /var/log/messages and it would tell you the number of matches. :) [13:35] sorry, i'll stop distracting [13:35] omg flaccid - sun-java6-plugin is not available [13:36] erythrocyte: :-D okay, that's not me... i already was suprised how i got famous so quickly ^^ [13:36] danny_: are you on 64-bit? [13:36] flaccid; screen res was 1280x800 but i don't know the screen model number - it's a laptop HP Compaq dv6000 WXGA [13:37] (the WXGA - i meant to say was the type of screen according to a review article) [13:37] danny_: weird. d/l it manually from here and install it: http://packages.ubuntu.com/gutsy/i386/sun-java6-plugin/download [13:37] jabba: thanks thats cool [13:37] flaccid: he's not on 64-bit? [13:37] good point Jucato [13:37] anyone: any help on my boot-up issue http://ubuntuforums.org/showthread.php?t=800878 ? [13:38] danny_: are you in 32bit or a 64bit? [13:38] i am 64 bit [13:38] AMD 64 [13:38] that's the problem danny_ [13:38] java plugin isn't available for 64-bit [13:38] just one of the perks of being "advanced" :P [13:39] 64 bit OS? [13:39] Yup [13:39] !flash64 [13:39] You can run Flash, Real, and Java plugins in AMD64 bit computers with Firefox. see the steps to follow at https://help.ubuntu.com/community/FirefoxAMD64FlashJava [13:39] im not sure which Os i downloaded [13:39] most of the closed source browser plugins are 32bit only [13:39] danny_: try this one: http://www.pastebin.org/37272 [13:39] flaccid is there a way to find out what specifically my screen is? [13:40] danny_: i apologise that i didn't check that [13:40] mattycoze: no real way i know [13:40] danny_: it's not the OS, it's Java's fault [13:40] just like there's not Flash for 64-bit. [13:40] hmm [13:40] mmm [13:40] hmmmmm [13:41] what do i do with that link lol [13:41] mattycoze: you can run xvidtune to see info about resolution etc. [13:41] danny_: you can try reading the link jussi01 gave above about AMD64 [13:42] ok will do [13:42] okay [13:42] i have no idea what to do with that [13:43] why can't the screen be a default? [13:43] i've never had to configure it before :/ [13:43] mattycoze: sorry this was meant for you: http://www.pastebin.org/37272 [13:44] what do i do with it [13:45] mattycoze: goto alt+f2 and type in: kdesudo /etc/X11/xorg.conf and then replace it with the above contents [13:45] kdesudo kate /etc/X11/xorg.conf [13:46] lol thx bibstha [13:46] sorry on 10th beer atm [13:46] np [13:46] flaccid: oh, beer is for tomorrow champions league match, OT sorry [13:47] haha [13:47] ok then. [13:47] and now? [13:48] mattycoze: logout to the login screen then restart X server from dropdown and see how it goes [13:48] ok [13:49] ah i found a mistake [13:50] flaccid: can you help me out with my booting issue? [13:50] man konqueror 4 seems buggy when run in kde3 with textareas [13:50] whats the issue again sorry [13:51] flaccid: kubuntu (kde 3.5.9) is extremely slow to boot ever since i installed some updates a couple of days ago [13:51] it temporarily freezes at "reading files needed to boot" - for like 2 minutes [13:52] erythrocyte: edit /boot/grub/menu.list and take out quite and splash options then see what its taking time on [13:52] flaccid: i've attached some debug info here http://ubuntuforums.org/showthread.php?t=800878 [13:52] k [13:52] flaccid: yes i did that...but no use :( [13:53] yep i see. /me looks further [13:53] flaccid: thanks :) [13:56] how old is system. is this slow behaviour new. it was after updates did you say? [13:56] flaccid: well, my system is approx 4-5 years old ..but i've never had this slow behaviour before with hardy [13:57] flaccid: this sluggishness started after some updates a couple of days ago [13:57] i got no idea. i can't see anything as to what it could be [13:58] flaccid: is there any extra info that i could provide that could help nail this? [13:58] to be honest i don't know. there would be but outside of my skillset [13:58] flaccid: ok, thanks anyway [13:59] np [13:59] :< [13:59] mattycoze: i found an error in the post.. [13:59] yeah i think i experienced it [13:59] lol [14:01] um my konqueror is stuffing up - lines are not visible in textareas. is this dual display mattycoze? [14:02] dual display? no my laptops got a screen and a 6-pin screen output [14:03] but i don't use it ever. [14:03] ok [14:04] i'll make this. but look over it and check resolution and driver etc. as im a little drunk [14:04] one sec [14:04] oh... [14:04] !envy [14:04] envyng is an updated version of the *UNSUPPORTED* envy package. It is now part of the ubuntu universe repository and has community support. As an early version, its results may vary but this should be used over the unsupported envy package. [14:04] brb [14:08] mattycoze: ok. try this one please: http://pastebin.ca/1023759 [14:09] heh flaccid maybe i'm not the best person to check whether it'll be appropriate or not... do you reckon somebody else - more sober might be able to co-confirm? [14:09] but i really appreciate your help [14:09] intoxicated or not lol [14:10] no worries [14:11] perhaps i forgot to mention to backup the xorg.conf to a copy first sorry [14:12] ok [14:12] i checked that one a lot however.. [14:13] the difference is because of the gui attempt at implementing the vga port.. [14:14] ie. failsafeDexconf [14:16] i am trying to configure evolution with hotmail i have done everything but i only have one question [14:17] how to i put in my password in evolution because it dosent give me an option to do that === neversfelde is now known as neversfelde_ === neversfelde_ is now known as neversfelde [14:17] smtp password [14:22] is there a reason for why i cant acces /etc/hosts.allow file [14:22] i get acces denied [14:22] i tryed with sudo [14:23] i have used the instructions from this guide http://www.ubuntugeek.com/send-and-receive-your-hotmail-messages-through-evolution.html [14:24] someone else able to help me with my display issue? :p soz flaccid [14:27] mattycoze: what was the problem [14:28] it's all the same; === Czessi_ is now known as Czessi [14:30] lol flaccid okay... i'm considering logging in a gnome session and running the command sudo dpkg-reconfigure xserver-xorg [14:31] hey there [14:31] i need your help flaccid [14:32] i cannot boot windows now lol [14:32] and was lucky to get back into linux [14:32] on GRUB all the options have changed [14:33] i gtg srry [14:33] wasit [14:34] do you have that nopaste i sent you [14:34] if you scroll up [14:34] it contains some details i need to add back [14:36] http://www.dasdeutschlandspiel.de/index.php?page=beg.php&id=4410 [14:37] got it [14:38] nien i havent [14:38] flaccid please help 2 mins lol [14:39] Hiyas all [14:39] hi [14:39] does anyone know where the boot grub option are stored? what file? [14:39] well i've learned my lesson everyone... [14:39] lol do not take advice from a drunk man === danny_ is now known as Cluber22 [14:39] Please help lol [14:40] matty can you help me [14:40] Cluber22, /boot/grub/menu.lst [14:40] Clubber22 okay i'll try but i'm a bit of a n00b too, tell me [14:41] ok nice [14:41] 1 sec [14:41] you can open it by alt+F2 then type or caopy and paste , kdesudo kate /boot/grub/menu.lst [14:41] yep [14:41] sudo kate /boot/grub/menu.lst [14:42] my windows has disapeared :O [14:42] don't use sudo in the run box [14:43] i sued it in konsole [14:43] soz back man, what was the prob clubber22? [14:43] only in the shell / terminal [14:43] ok :) [14:43] ok i need to add my windows partition back [14:43] it got removed somehow [14:43] i crapped it when i couldnt boot windows or linux [14:44] luckily i remembered i needed to boot linux with noacpl noacpi [14:44] why cant i make chages in hosts.allow file [14:44] changes [14:44] yeah dual booting sux for me, i've tried it once or twice, never worked out very good [14:44] !offtopic [14:44] #kubuntu is the official Kubuntu support channel, for all Kubuntu-related support questions. Please use #kubuntu-offtopic for general chatter. Thanks! [14:45] can someone help me [14:46] i need to add windows back to the grub boot list [14:46] root (hd0,1) << this is the linux partition [14:46] how do i find my windows one === emilsedgh_ is now known as emilsedgh [14:48] Cluber22, post your /boot/grub/menu.lst on pastebin ,and we'll have alook then tell you what to add or comment out [14:48] i need help [14:49] !pastebin | Cluber22 [14:49] Cluber22: pastebin is a service to post large texts so you don't flood the channel. The Ubuntu pastebin is at http://paste.ubuntu.com (be sure to give the URL of your paste - see also the #kubuntu channel topic) [14:50] why do i get acces denied when i try to edit /etc/hosts.allow [14:50] why are you editing it, smeril ..what are you trying to do? [14:50] mattycoze: lol reprimanding yourself? looks like that topic isnt offtopic tho - since it relates to the original question :) [14:50] hold on i think i got it [14:50] rörörö rörö rö [14:51] Hey BluesKaj :) [14:51] hi kkathman [14:51] i want to use evolution with hotmail and i have foloved this guide http://www.ubuntugeek.com/send-and-receive-your-hotmail-messages-through-evolution.html [14:51] kkathman nah i was trying to find the room i wanted to go to [14:51] lol abusing the ! function [14:51] ahh hehe [14:51] i have done all the setings but it wont let me connect with tha password [14:52] i want to add hotwayd: 127.0.0.1 in that file === chris_ is now known as comodo [14:53] smeril: use kdesu kate to edit that file then [14:58] that worked thanks [14:59] but now i have to go to the next step [14:59] ciao matteo69 parli italiano? [14:59] what's this command do: "install -dv /tools/include" [14:59] !it [14:59] Vai su #ubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! === pyth0n is now known as PyTh0n [15:17] how do i get into standby!! sorry,..imnoob [15:17] if i install some source package over make, make install.. it will copy some file sinto my system.. how do i uninstall this.. is there normaly a uninstall instruction in the source package or can i do that over my system? [15:18] !standby [15:18] Factoid standby not found [15:18] wtf.. [15:18] as if there isnt standby [15:18] wthoang: notebook? [15:18] yeh [15:19] IBM T43 [15:19] normaly over kpowersave or kpowermanagement [15:20] where.. [15:20] wthoang: just install kpowersave.. if you are really on kubuntu.. [15:21] kpowersave has some good options... [15:22] cool>>>done [15:22] cheers [15:22] wthoang: and does it work? === _neversfelde is now known as neversfelde [15:25] hey guys [15:25] if i install some source package over make, make install.. it will copy some file sinto my system.. how do i uninstall this.. is there normaly a uninstall instruction in the source package or can i do that over my system? [15:25] i have an problem with my usb wireless lan alfa usb [15:26] when i turn it on my usb slot "dmesg" gives me follow error 180.275904] ieee80211_init: failed to initialize WME (err=-17) [15:26] whats wrong? [15:27] noaXess, there's usually a readme file that tells you haow to uninstall and sometimnes the there's an uninstall script as well. [15:27] I'm using openbox but all my keybindings seem to be ignored - example windows-F1 launches help in whatever application I'm in rather than show desktop 1 [15:29] BluesKaj: yes.. normally :) and if not? search trought the makefile and remove manually? [15:29] BluesKaj: it is a *.ko file that loads a module wil system starting.. [15:30] noaXess, check the readme first , there's usually an uninstall instruction [15:30] BluesKaj: i have checket the source.. there is no .. [15:30] ok, what's the app ? [15:30] noaXess: umm..sorry..im not sure where i can set standby mode..is it anything like suspend to ram or disk?? [15:31] wthoang_: yes.. sus.. to ram is standby and sus.. to disk is hibernate [15:31] noaXess: You can also try in same dir you did "make" or "sudo make install" something like "sudo make uninstall" or "sudo make clean" or "sudo make dist-clean" which normally will clear out that apps binaries that it compiles [15:31] cool [15:31] cheers [15:31] ! [15:31] while trying to compile glibc under kubuntu 8.04, i received this error: ld: cannot find -lgcc_eh collect2: ld returned 1 exit status [15:31] what is up with that? [15:32] genii: ther is no option for sudo make uninstall or dist-clean.. onyl sudo make clean and that will only remove the source package [15:33] #kubuntu.de [15:33] noaXess: If all it did eventually was to make a .ko file, delete that file it made manually then run: sudo depmod -a to update module lists [15:34] i what scripts i see, what modul will be startet? [15:34] #kubuntu-de [15:34] !de | darkalien [15:34] darkalien: Deutschsprachige Hilfe fuer Probleme mit Ubuntu, Kubuntu und Edubuntu finden Sie in den Kanaelen #ubuntu-de, #kubuntu-de, #xubuntu-de und #edubuntu-de [15:34] in know deswegen wechsel ich ja [15:35] witch channel i can bekam help for wlan? [15:35] jandry [15:36] darkalien, click on #kubuntu-kde [15:36] genii: okay. i found the .ko file in /lib/modules/.... [15:36] err #kubuntu-de [15:36] :) [15:37] how i can use my video card [15:37] ?? [15:37] ati radeon xm200 [15:37] in kubuntu [15:37] ?? [15:38] noaXess: If that was the only thing it eventually made and installed when the "sudo make install" was run originally, just delete the file then as I remarked, run the: sudo depmod -a to update the internal list of available modules [15:39] javier, kubuntu hardy ? [15:39] yes [15:40] i want to know if i could use compiz effects? [15:41] javier, I have a X200G ATI card and I use the default restricted driver in kmenu/system/hardware drivers manager ...but it depends on what kind of graphics you want to run too [15:42] omg, #jokes is related to #kubuntu ! :O [15:43] dunno if compiz will run on the x200 , javier ..check google-linux [15:44] thank yoou [15:44] Hi I'm thinking about running x86_64.. Where can I read about the drawbacks? === ubuntu__ is now known as faileas [15:46] italia [15:46] ??? [15:46] no english [15:47] !it | lola [15:47] lola: Vai su #ubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! [15:48] << english +turkısh [15:48] eheheh [15:48] ((: [15:48] all the world [15:48] !tr [15:48] Turk ubuntu kullanicilari, turkce yardim yada geyik icin #ubuntu-tr hizmetinizde. [15:49] the last updates are broken in gb.archive.ubuntu.com. The fiels are not there. What on earth is happening to our process???? [15:50] did you try other repository mirrors? [15:56] anyone try the FF3RC ? [15:56] can anyone help me with ies4linux? [15:57] i need mfc42.cab, but microsoft does not have the file anymore === ubuntu57 is now known as Juli3n57 [16:01] asdfe: http://activex.microsoft.com/controls/vc/mfc42.cab [16:01] oh too late === bibekshrestha is now known as bibstha [16:04] Since I upgraded from gutsy to hardy my laptop won't suspend anymore. Any ideas where to look? [16:05] what happens is it shuts the display off, but the power light stays on and the fan runs really hard [16:05] sorry don't know much about linux :-( [16:05] Anybody knows why I need to sudo for shutdown command, and not for shutting down via the K menu? [16:06] pim- kdm runs as root, so it already has permission to shutdown your machine [16:06] pim- but on a terminal you're just a regular user, so you need to sudo [16:07] jlido: About the suspend, no idea of solution yet but I have same issue [16:07] damn [16:07] genii- have you reported it as a bug? [16:08] jlido: Someone else has, it's someplace on Launchpad [16:09] genii- okay. I'd like to watch it and help if I can. I'll see if I can find the bug there. [16:10] hey guys. i just upgraded to 8.4 and konsole no longer has true transparency. is there a fix for this? [16:11] jlido: There is a fix which seems to work for some users here http://blog.loxal.net/2008/04/solution-ubuntu-hardy-resume-from.html [16:12] hey guys. i just upgraded to 8.4 and konsole no longer has true transparency. is there a fix for this? === kewark is now known as krawek === sparr_ is now known as sparr [16:21] i installed kde4 on kubuntu8.04 and i cant access my ntfs drives can any one help how to edit fstab file? [16:21] genii- thanks, I'll look at that [16:25] I am unable to update my computer, I keep getting this error message: [16:25] Sudo: unable to resolve host "my computer's name" [16:26] any thoughts? [16:27] !hostname | tim [16:27] tim: Use hostname to set the hostname, or to do it permanently: edit /etc/hostname and /etc/hosts . WARNING! Make sure that your current hostname and /etc/hosts match, otherwise sudo may not work properly. Alternatively, use the gui at system>administration>networking on the "General" tab [16:28] anyone running TimeVault? [16:28] tim: You may need to boot into recovery mode to make these changes if you cannot sudo [16:29] Pici: Looks like he chose a non-valid name for hostname (eg with 2 spaces in it) [16:29] And an apostrophe [16:29] !mp3 [16:29] For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also http://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats [16:29] genii: "my computer's name" [16:29] ok, its actually KITCHEN [16:30] anyone running TimeVault? [16:30] winth Kubuntu [16:31] tim: The name seems valid, so unify the config files as the bot's factoid suggests [16:32] hmmm, is there a place I can look up how to do that? I'm relatively new to this. [16:35] hello [16:35] hi [16:36] hello jussi how are you? [16:37] My windows key doesn't seem to be working - xev shows it mapped to F13 but when I try and use it from withing openbox nothing happens? [16:37] disculpen , es que la verdad no se en donde estoy [16:37] estaba probando kd4 y llegue hasta aqui [16:39] !disks [16:39] Partitioning programs: !GParted or QTParted (also "man mkfs" for formatting) - Mounting partitions in !GNOME under !Dapper: System -> Administration -> Disks - For !Edgy and later, see !fstab and !DiskMounter [16:39] 1fstab [16:39] !fstab [16:39] The /etc/fstab file indicates how drive partitions are to be used or otherwise integrated into the file system. See http://www.tuxfiles.org/linuxhelp/fstab.html and !Partitions [16:41] genii: I am unable to use the gui, it won't let me get into administrator mode [16:43] how do i look at my partitions in commandline mode? [16:45] malik_: sudo fdisk -l [16:46] hey.. i am having a major problem.. i bought a new computer and installed kubuntu 1 week back and everything was working fine with the new nvidia drivers.. Yesterday I updated my packages with Adept, and selected Nvidia legacy drivers.. This uninstalled my "new" Nvidia driver package, but i foolishly went ahead.. On rebooting the system, nothing gets displayed on the screen.. How do I resolve this issue? [16:47] What is that screensaver that is loads on lined of different thicknesses converging slowly to create what looks like some crazy city [16:48] ubuntu_ maybe you could use a live linux cd [16:48] and try to fix it from there [16:48] How could I make Wine first lock the mouse in a window, and then let go of it with some keyboard command? I remember having had that in earlier versions of wine [16:49] go to the wine channel [16:49] kaminix: Probably best to ask in #winehq [16:49] #wine [16:49] will also get you to the same channel [16:50] pim: They told me to go here. [16:51] I have booted from a live cd and that is how i am having this konversation :) [16:51] isn't there a rescue option on it? [16:52] nope [16:54] is there a config file somewhere that i can manually edit to revert back to old nvidia drivers ? [16:54] also how do i get the console .. .. etc does not seem to work? [16:55] actually [16:55] do you have grub installed ubuntu_ ? [16:55] nope [16:56] so you use LILO? [16:56] i actually have only kubundu installed.. nothing else on the pc currently [16:56] you have grub installed then [16:56] it loads the operating system [16:56] when you boot the pc [16:57] i will check that again.. but i didnt get the grub menu when it boots up.. maybe the timeout is set to zero or something.. [16:57] You can press c to go to the console when you are in the menu [16:57] oh [16:58] ok.. i will try that.. assuming i am able to boot to a console with that option.. is there some command i can run to uninstall packages [16:59] specifically the nvidia drivers.. or some config file that i should edit.. [16:59] I've installed linux only saturday, so I have no idea actually : -( [17:00] oh.. thanks anyway.. i should try rebooting then :) [17:00] but [17:00] yes [17:01] if there is a console option, you could try downloading with apt-get [17:01] how do i uninstall ? [17:01] can i do it with apt-get ? [17:01] apt-get remove [17:02] or apt-get purge [pkg name] [17:02] and [17:02] ubuntu_: you want to install nvidia drivers? [17:02] whereis nvidia will get you the directory of the driver [17:02] try ENVY [17:02] i am just reposting my problem "ey.. i am having a major problem.. i bought a new computer and installed kubuntu 1 week back and everything was working fine with the new nvidia drivers.. Yesterday I updated my packages with Adept, and selected Nvidia legacy drivers.. This uninstalled my "new" Nvidia driver package, but i foolishly went ahead.. On rebooting the system, nothing gets displayed on the screen.. How do I resolve this issue?" [17:03] ooh...been there done that :P [17:05] how do i list the install packages ? [17:05] I have installed adobe reader and have xpdf but none of them have registered with firefox 3 that they can open pdfs [17:05] How do I fix, and how come this didnt work out of the tin? [17:05] dpkg -l [17:05] ubuntu__, ctrl+alt+F2 , sudo dpkg-reconfigure xserver-xorg , choose the defaults as you go thru the menu and the video driver will be the Vesa , cuz it's generic and should give a desktop afterwards. then we can reinstall the default restricted driver [17:06] if you want to list installed pkg, do sudo dpkg -l|grep ^i [17:06] ubuntu_: try the envy app here http://www.albertomilone.com/nvidia_scripts1.html to sort out your driver prob [17:07] thanks BluesKaj... will try that now.. but when i tried ctrl+alt+F1 last time, it did not give me a console... [17:08] ubuntu__, try F2 instaed of F1 [17:08] any idea why that could have happened? [17:08] oh ok.. === holymoly is now known as holycow [17:09] moope1: first of all, i suggest using kpdf (or okular on kde4) [17:09] after setting a root password, prompts in the gui (like control panel admin mode) still ask for user pw - is there a way to fix this? [17:09] kpdf is not so good like evince [17:09] moope1: that's installed by default [17:10] will try that then.. logging of now.. [17:10] kpdf is there but not coming up on firefox 3 [17:10] moope1: I don't know why those don't show up in firefox, but if you click browse, you can find the executables in /usr/bin/ and firefox should remember it afterwards [17:10] yuriy: [17:10] ok [17:11] ok I know, strange question, but does anyone know where I can go to get some Windows tech questions answered? [17:11] Specifically about networked printers [17:11] daniweb? [17:11] Choreboy: ##windows [17:12] so..., no? [17:12] ## or just # [17:12] Choreboy: ## [17:12] thanks [17:12] how do I install the susstrate screensaver? do I have to restart x after installing new ones? [17:13] no [17:13] s/sustrate/substrate [17:14] moope1: I think its in the xscreensaver-data-extra package [17:14] yuriy, thanks. I think I was having a momentary lapse of reason [17:22] Hi, can anyone please confirm this: create a new file named testö.txt, open dolphin at sftp://localhost and check if the name is displayed correctly (for me it isn't) [17:22] I have another q. If someone use gedit for programming. Where could I set up tabbing for c++ or php an so on ? maybe some plugin ? [17:23] hi, when I try and shout down my computer it just hangs [17:23] also applied to when I try to log out [17:24] I have a dual head setup. screen 1 goes blank and screen 2 keeps the picture [17:24] mooper, ati graphics ? [17:24] BluesKaj: You got it [17:25] :'( [17:25] :'( [17:27] okay, next problem. The screen savers I am installing are not appearing in the screen saver setting dialogue [17:29] any ideas on how to debug? === lain_ is now known as dwidmann === john_ is now known as john__ === john__ is now known as john_1960 [17:31] mooper: I think you need the associated kscreensaver packages, like kscreensaver-xsavers-extra for the package I suggested above. [17:31] mooper: I'm not really a KDE user so I missed it the first time [17:32] good man pici :) [17:32] give the man a biscuit [17:33] !helpersnack | Pici [17:33] Pici: Wow! You're such a great helper, you deserve a cookie! [17:34] !opsnack [17:34] Chocolate! And Peanuts! [17:34] woo [17:34] :P [17:36] debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable === alp_ is now known as Alp` [17:38] hey all. how do i get rid of the resize borders on a window that has maximized? [17:38] *has been maximized [17:39] dear friends what I need to do at my hardy installation in order to have runlevel choice from grub (ex to set 5 as parameter and starts ubuntu at runlevel 5). Thanks. [17:42] nm. found it. [17:42] "border width" in Window Decorations. [17:45] dear friends what I need to do at my hardy installation in order to have runlevel choice from grub (ex to set 5 as parameter and starts ubuntu at runlevel 5). Thanks. [17:51] mikek: Since runlevels 2,3,4 and 5 are identical in Debian and Ubuntu it doesn't seem to make much practical sense. [17:53] hi all [17:53] i have a problem with sound in kubuntu [17:53] genii: dear friend, I modified my runleves so it does make sence... do you know how can achive that? [17:53] on my sisters account it doesnt work, on my own it does [17:54] can someone tell me why i dont have bitchx in apt-cache search ? and yes i have all the repositories uncommented and updated [17:55] !info bitchx [17:55] Package bitchx does not exist in hardy [17:56] mikek: Add at the end of the kernel loading line in the menu.lst file the number of the runlevel. [17:56] SouthernC: bitchx was removed from upstream (debian unstable) since it was no longer being maintained, see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=451373. [17:56] Debian bug 451373 in ircii-pana "removal of ircii-pana (aka bitchx)" [Unknown,Closed] [17:56] mikek: But as I already stated, levels 2,3,4 and 5 are all the same [17:56] :( [17:57] SouthernC: Perhaps try out irssi? [17:57] anything has to be better then this kopete garbage [17:57] neg ill just compile it from source [17:58] thanks anyway [17:58] surely [17:58] genii: I try it but not sucess. runlevel command give me 2 but i added 5... (it does make sence to me I am planning to have much deferent run levels) [18:04] I'm trying to compile a program but get "checking for X... configure: error: Can't find X libraries. Please check your installation and add the correct paths!". i have libx11-dev installed. what else do i need? [18:05] ScorpKing: xorg-dev [18:05] ah ok. thanks Pici === lain_ is now known as dwidmann [18:07] my screen settings are kinda screwed in KDE. it's OK in xorg, but after the login screen the Desktop loads an the screen resolution somehow changes as well (to a smaller one). Is there a file in ~/.kde/ that I can delete in order to reset this whole thing? [18:10] setting the screen res via System Settings doesn't work by the way... [18:11] mikek: If you put any runlevel there of 2,3,4 or 5 it will go to runlevel 2 since they are all equivelents [18:12] bah left === emilsedgh_ is now known as emilsedgh [18:12] I just selected a load of files and selected compress. I has started loads of processes. I think it is trying to compress each file into its own archive... [18:13] smart guy === LeeJunFan_ is now known as LeeJunFan [18:14] SouthernC: thats pretty crappy from a usability point of view [18:15] mooper: psaux | grep blah [18:15] mooper: pretty easy solution too [18:15] sure, for you and me maybe [18:16] but its still pretty crappy [18:16] thats why theres a power button [18:16] lol [18:19] zzzzzz ark is anoying === seamus_ is now known as seamusoid [18:26] hi guys adept crashed while downloading updates. now it says no updates are available but it didn't install the updates. even when i refresh no updates. but there were about 33 to put in. how can i get these updates in now? [18:29] to jonah> try in konsole sudo apt-get update [18:29] sudo apt-get upgrade [18:30] robinw: that also says there are non to install [18:30] so then sudo apt-get -f install [18:34] hi all === uga|away is now known as uga [18:36] * uga checks _2 isn't around and says a 'hi' [18:36] hi [18:44] hey [18:44] hi [18:45] i got a problem with firefox since updating ubuntu to 8.04 and thus firefox to version 3 beta 5 [18:45] i can't assign applications to handle certain filetypes automatically after downloading them [18:45] Yeah mine doesn't seem to do that either and it won't open jpgs by itself [18:46] i.e. i gotta download .torrent files and open them afterwards now [18:46] any idea on how to solve this? i even installed firefox-2 again but that did not work [18:47] Mine keeps like a list because I always show it where to find the program [18:47] Even though it should know [18:48] i can't even select an option to open the file with a program [18:48] nado: you are not alone [18:48] this sucks :D [18:48] sparr_: so no solution yet? [18:49] nado: you can still install firefox-2 [18:49] :) [18:49] jussi01: tried that, did not work [18:50] nado: how so? its the same version as 7.10 iirc [18:50] jussi01: thought that, too. dunno why, but it does not work [18:51] nado: did you start firefox 2 explicitly? [18:54] jussi01: thanks for the hint. when i selected firefox 2 out of the programs list it did not start version 2, but out of the shell it worked. then i reconfigured ktorrent to handle all .torrent files and now it works in version 5 [18:54] strange [18:54] nado: well at least you got it working :) [18:55] nado: file association handling with firefox on ubuntu has just gotten worse over the past few versions [18:55] yup [18:55] sparr_: in version 3 it does not seem to work at all [18:55] the configuration tab i mean [18:55] it's empty === pascalFR is now known as PascalFR [18:56] whatever, it works now.... [19:00] oh, another thing.... on 8.04 my numpad status LED won't light up on first activation, numpad is active though [19:00] weird things happen since that update :D [19:01] nado: weird I have a similar problem at work - my numpad light is reversed === in_flames_666 is now known as olie [19:11] according to the cp man page, -p means preserve mode, ownerships and timestamps, but if I cp -Rp a directory, the new directory is owned by me and mode 700 regardless of the modes and ownerships on the original directory. do I have to be root for that to work? [19:11] this is happening on an nfs mount, if that matters [19:12] I dont think it knows how to preserve the ownerships across the filesystems properly. [19:12] Pici: it's not across filesystems, the whole operation is happening on an nfs mount. also I just tested in my home dir and got similar behavior. [19:13] hmmm [19:13] works fine as root, though :/ [19:17] Does anyone know anything about getting a wireless card to work? I really need some help. [19:19] !wireless [19:19] Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs [19:21] anyone here using microsoft moonlight under linux? [19:22] what is that function called that automatically gets all the params passed to a function === dan_ is now known as Azmodan [19:37] I have an external USB drive. WHen I click on its icon, I am asked what program to use for opening it. I tell it DOLPHIN, but it never remembers it, even though I click on the chekbox that tell Kubuntu (Hardy. KDE4) to always use the same program. What is going on? [19:38] grub-install --recheck --no-floppy --root-directory=[insert root directory here] (hd1) should install grub to the MBR of hd1 right? [19:43] dwidmann_laptop: hd1 as the bios sees them in it's order of detection. [19:46] genii: yeah, I think I've realised my problem actually and am taking steps to fix .... if only I could get sysrescue to see my eSATA drive. [19:46] I forgot just how picky my boards BIOS is about the location of the bootable partition (ie: it needs to be primary, etc) [19:46] hello. Has a definite fix been discovered for playing dvds in Hardy? Worked fine in gutsy and all previous ones for me, but i get an error that states the soruce cannot be read. And yes, i do have libdvdcss installed [19:48] hi, im having some problems with a 1/4th mono (an instrument) to USB interface (its just a cable with a analog to digital converter in it), and i cant get it to work with any recording programs, im using Ardour2, when i start it i use ALSA as the driver, and USB Audio as the interface, and i know how to record with Ardour (click record on the track/bus, click the other record button, then play to start recording, its worked with a microphone [19:48] beforE) but i cant seem to get anything to work with this USB interface, does anyone know what im doing wrong and how to get it to work? [19:48] genii, wait, even better, perk #1 to having gigs of RAM ... just copy it to the RAMFS :) [19:49] dwidmann_laptop: Should run quick anyhow [19:49] Makuseru: check "alsamixer" (on commandline) if all inputs are on [19:50] Makuseru: You asked in both #kubuntu and #ubuntu which desktop are you on, KDE or Gnome? [19:50] dany_21a: i dont see USB audio as an option. genii: KDE, i jsut asked in the Ubuntu room first since its more populated [19:50] genii: (I have to back up, delete my boot partition, and recreate it as primary) [19:51] dwidmann_laptop: Gah [19:51] Makuseru: so your usb_audio driver isnt loaded at all? [19:51] Makuseru: check dmesg (commandline) after replugging the usb-device [19:51] dany_21a: im not sure === linuxmce is now known as ordodk [19:52] Makuseru: The result of command: lsmod | grep snd-usb-audio should show it loaded for usb sound devices. [19:53] dany_21a: i checkd dmesg, it recognizes it [19:54] genii: i tried that command and nothing happened [19:54] Makuseru back in alsamixer press F2 - check if it has a cardnumber assigned [19:54] dany_21a: yes, #2 [19:54] hey all. i'm back... for some reason now when I maximize firefox, it has the resizing borders on all four sides of the window. i find it slightly annoying, and it wasn't like that before... what the heck did i do? [19:54] Makuseru: Then the usb audio driver is not being loaded [19:55] Makuseru: start "alsamixer -c2" [19:55] Makuseru: To load it: sudo modprobe snd-usb-audio [19:56] Makuseru: (press F4 for input controls... check F1 for help) [19:56] genii: uh oh .... this didn't work out the way I had hoped. [19:56] dany_21a: ok, thanks, the capture for it was jsut turned down [19:56] dwidmann_laptop: It's showing some oddball partition type now? [19:58] genii: no, even better, the contents of /dev/sdb5 which i had thought I'd copied into RAM by copying it to somewhere else in the filesystem (it's a live disk ... ) weren't really copied, but linked or something, so when I deleted the partition I lost it. [19:58] dwidmann_laptop: Let me guess, this was old /home or so === ubuntu__ is now known as frybye [19:59] genii: nah, my /home is currently backed up to my external drive .... this was my /boot partition. [20:00] Hi all ... when running a hardy live session - is there a way to setup to save changes and stuff to a /kubuntu somehow? [20:01] just need to do this for a week till my new pc is here that will be dedicated for hardy... [20:01] I suppose i can do something like "sudo dpkg --list | grep ^ii.* | cut -d ' ' -f 3 | tr '\n' ' ';" "sudo apt-get install --reinstall $(!!)" [20:02] dany_21a: but its still not recording anything, weird === linuxmce is now known as ordodk [20:02] there is a way of doing local saveing from the live-cd/dvd isn't there??? [20:03] Makuseru: check F1..it states "space" for capture (but this i think you can also check from the kmix app) [20:03] Does anyone know how to turn off borders on maximized windows??? [20:03] ign - you are after a full screen not max- window or..? === wesley_ is now known as ichigo_nl [20:04] ign0ramus: wow...that would be a cool feature... i hate that i must use F4 or aim precisely to hit the left side-menu in my maximized opera [20:04] frybye: not "full screen" (like F11), just a maximized window. after some kde tweaking (i dumped kde4 for now), even maximized windows have borders and can be resized [20:05] dany_21a: you can just make the border larger if you want in Window Decorations (iirc) [20:05] so what kind soul is going to tell this ignoramous if there is a way to save (settings and stuff...) locally when running the live-dvd??? [20:05] But I really dislike the borders on a maximized window- they're annoying to me. [20:05] dany_21a: what do you mean by "space"? [20:06] ign0ramus: na... i _dont_ want to hit the border (opera has a 2-pixel-width button on the left side, to expand the side-panel) [20:06] Makuseru: spacebar [20:06] oh, haha [20:06] frybye: afaik, you cannot save locally running off the live cd [20:07] ign.. ok I thought there was some trick - like a boot line command or something that set up a special local drive or whatever.. dont matter that much.. will be -properly- installing as soon as my new (2nd) pc is here in a week or so... [20:08] which brings me to my next question... (hehehe) [20:08] when I get a brand new pc with unformated drive etc.. sticking the hardy dvd in the dvd-drive and hitting install will get it to format the drive and creat partitions and so on or...? [20:09] frybye: yes. [20:09] good - no need to separatly first use g-parted or similar to format the drive and creat part right? [20:09] frybye: nope, it will guide you through the partition process, and even suggest a good way to set it up [20:10] cool - man has this linux stuff developed a bit in the last couple of years or so... [20:10] Only thing is: if you're buying a windows box, make sure you bulldoze the D: drive and free up some space (unless you're running a dual-boot and want to keep D:) [20:10] I remember having a real struggel to get anywhere some time back.. [20:10] it is a box-box.. ie no op system... [20:11] frybye: gparted or qtparted are great programs, but the wubi-like installer on Hardy is phenomenal [20:11] nothing - I select the stuff I want in it - they screw it together and -alledegly- do a function check and there is zillch on the hard drive apparently.. [20:12] hi there [20:12] I got problem with cmake [20:12] I am trying to compile webkam 2.0 for kde4 under kde3 HH, 64b platform. and I got this problem: Unknown CMake command "kde4_add_ui_files". [20:12] ign0ramus: that is the only way you get a new pc here for about 200€ with a amd x2 250mb hd 1gig ram etc... [20:12] vinrik: your syntax is wrong [20:13] ign0ramus: it is not. it si working source for this program [20:13] frybye: amd? ew... [20:13] ign0ramus: here it is: http://www.kde-apps.org/content/show.php?content=76902&forumpage=0&PHPSESSID=d63bc5929142ade9a53de461f9330546 [20:13] It is part of my religion pal - amd goes back to before the www with me hehehe [20:13] if you're getting a command error, then the syntax is incorrect. [20:13] I have not kde4 installed, but I have installed dev packages. program normally work under kde3 on 386 from precompiled deb package [20:14] but I am on 64b platform, so I need to compile [20:14] ign0ramus: it is not true. it looks like I am missing some package [20:14] virnik: i would strongly suggest installing "Cheese" over this program, even though Cheese is GTK [20:14] can somebody help me out with this? i have searched google, but with no luck [20:15] virnik: its in the repositories, and has recording capabilities [20:15] ign0ramus: cheese is webcam tool? [20:15] ok, I will take a look, but still...i wanna to try this webkam. but until then, I will install cheese [20:15] virnik: http://packages.ubuntu.com/gutsy/gnome/cheese [20:15] heheh - next question - if i connect 1 windoze and one hardy pc to the home router - will need to install samba in order to hvae a local network or...? [20:15] cheese has more functionality [20:16] ign0ramus: thx for tip. apt-get install cheese is just sufficient. but still, I want to try webkam [20:16] frybye: networking is not my forte. Someone here can help you with that, i'm sure ;) [20:16] ie. other wise they will both be able to connect to the internet but not "see" each other or...? [20:16] frybye: samba is for sharing. network works over TPC/IP like samba does === kal is now known as kalenedrael [20:17] ign0ramus: see if somebody kindly picks this up...? [20:17] frybye: i don't know what you want me to do ... :/ [20:17] frybye: but yes, install samba, create guest account in system, set its pass to none, and create user of same name in samba. then set sharing in smb.conf [20:17] HEY! SOMEBODY HELP THIS GUY! ;) [20:17] ok virnik.. but without installing some sort of server - a windoze and linux pc will not see each other on the local net or...? [20:18] or put better - there will BE no local net?? [20:18] frybye: sure they will see each other [20:18] frybye: please just type it "windows". "windoze" makes you look pretentious, especially if you are new the GNU/Linux world. [20:18] frybye: LAN is not problem. set ip addresses of both computers in the same subnet [20:19] ign0ramus: here in Germany the folks who are not-so-in-love with m$ tend to write it with a z... but ok... [20:20] virnik: and if both pcs are set to same sub-net dont need the samba or..? [20:21] frybye: u can use ftp, or sftp, it depends on u [20:21] can somebody help me with my problem, finally? [20:22] virnik - sorry i would be happy to help but too clueless in this stuff... [20:22] virnik: are you going to supply some information? [20:23] (cook a wicked hungarian goulash though - when you get to berlin.. heheh) [20:23] virnik: please use pastebin for full output [20:25] virnik: If this is regarding the cmake compile issue, you may get more relevent responses from #kubuntu-devel or possibly #kubuntu-kde4 [20:25] ign0ramus: full output has only two lines [20:26] virnik: are you running Hardy? [20:26] yes [20:26] i have installed only kde4 dev libs [20:26] virnik: THEN WHY THE F*** ARE YOU COMPILING FROM SOURCES? [20:26] I do not want to install kde4 itself [20:26] virnik: just install the .deb package [20:27] ign0ramus: u must be some ignorant, or u havent read what I have written. that programm have only i386 package, not 64b package. so I need to compile [20:27] virnik: the i386 package will work fine [20:27] and I do not see anything wrong on compiling [20:27] ign0ramus: yes, with forcing. but I want it clean way [20:27] virnik: OK, whatever. what are your full two lines of output? [20:29] i am currently using kde4 and i previously wanted to use the emerald windows manager however now I want to go back to the default kde4 windows manager. i tried "kwin --replace" and that seems to get rid of emerald but it does not give me the windows style that I set on the kde4 system settings... does anyone know of the correct command to get this back? [20:31] hi together [20:31] <_Angelus_> guys is there kubuntu mugs and accessories like the ubuntu ones? [20:34] I thought the default for KDE4 was DOlphin [20:34] !ruby [20:34] Factoid ruby not found [20:34] where [20:34] what do i need to install for ruby header files [20:35] Can someone recommend some USB Audio recording software? [20:35] Rioting_pacifist: ruby1.8-dev [20:36] hellhound: if you're just looking for your old windows style, go into System Settings, and re-apply your old theme. unless you are looking to do more... [20:36] _Angelus_: Not yet unfortunately [20:36] <_Angelus_> :( [20:36] <_Angelus_> i want one!!! [20:37] _angelus_: there are, but they're not sold by Canonical [20:37] <_Angelus_> yeah [20:37] <_Angelus_> i saw some "Got Kubuntu?" [20:37] <_Angelus_> ones [20:37] <_Angelus_> but i wished canonical sold ones of kubuntu like the ubuntu ones [20:38] _angelus_: here's a lot of (overpriced) kubuntu gear: http://www.cafepress.com/buy/%22kubuntu%22/-/source_searchBox/x_0/y_0 [20:38] <_Angelus_> yeah thats what im seein now [20:40] thx [20:41] ign0ramus: and the quality from cafepress sucks [20:42] makuseru: Agreed. Unfortunately, there's not too many other places that have Kubuntu stuffs [20:42] very true [20:43] I just received a ShipIt! Ubuntu Hardy CD today, and it came with a strip of Ubuntu stickers. I really wish they were Kubuntu ones instead. [20:43] Hi. Im looking at installing ubuntu from a USB but I'm wondering if this method is possible for any distro? since I wanna install crux this way. also I'm scared about the idea of using that syslinux, coz after the install I want to delete the partition and use it as I normally did, will the USB still be usable? [20:43] i downloaded some new wallpapers but they display as the color selection window ???? [20:44] nyad: installing ubuntu from flash drive is certainly possible, although there are easier distros (DSL, Puppy Linux, etc) [20:45] ign0ramus, ya but I want to install crux with a USB and I'm following the guidelines ubuntu gives but I'm not sure if it will work [20:45] dave11: huh? could you re-phrase that or even post a screenshot please? [20:45] ok [20:45] ok, is there a place in KDE to set the preferred applications? [20:46] shane7: "Default Applications" in System Settings [20:46] nyad: why not just add Crux after you've installed? [20:46] how do I post a screenshot? [20:46] !screenshot [20:46] Screenshots can be made with the [PrtScr] button or the File -> Acquire menu in the GIMP. [20:47] Crux is a linux distro [20:47] ign0ramus: hmm, I'm sorry I'm a long time Gnome user, and I don' t see that in KDE? Where do I find that? [20:47] nyad: gotcha. I think you're probably asking in the wrong forum, then. sorry. [20:47] ign0ramus: ha ha, found it, it was in the root menu. [20:48] hi people... what's now the best way to setup dual monitors on kubuntu? i have the second monitor plugged into the nvidia card with two outputs (one dvi and one vga).. guidance? [20:48] ign0ramus, I was just thinking that since it's possible with ubuntu and it has https://help.ubuntu.com/community/Installation/FromUSBStick to explain, I thought perhaps it could be a cross distro thing [20:48] as well [20:49] r there logitech mouse drivers? [20:49] ign0ramus: thanks, I found it and got that fixed, I knew there should be a simple way [20:49] when i try to load certain wallpapers, they display as the color selected in the background settings window? [20:49] for kubuntu [20:49] shane7: i'm at work (on windows box), but IIRC, Kmenu > System Settings > Advanced tab > Default Applications. I''m pretty sure [20:49] ? [20:50] ign0ramus: yeah, I found it, it was right in the root of the menu, I just overlooked it, thanks [20:50] shane7: woops, i'm a little slow today. Trying to look busy ;) [20:50] ign0ramus: ha ha, no prob [20:50] does anyone use conky with kde? mine looks really sorry [20:51] c1|freaky: if you're using a popular logitech mouse, I can almost guarantee it will work [20:51] c1|freaky: if you have one of those 83,038 million-button ones, you may have to do some work. [20:52] dave11: i think you probably have a color picked out for the background, instead of allowing it to use a picture... [20:52] ign0ramus: i have the MX Revolution mouse, 7 buttons === awen| is now known as awen_ [20:53] ign0ramus: no, it has picture selected but shows the background color only on certain wallpaper pictures [20:54] c1|freaky: http://www.enduserblog.com/2008/04/index.html [20:54] dave11: are you positive those pictures still exist in the directory? did you move them elsewhere? what if you do a preview? [20:54] alguem saca de linux kubuntu ai [20:56] c|1freaky: sorry, the link i meant to paste was this --> http://ubuntuforums.org/showthread.php?p=2727025 [20:56] ign0ramus: i downloaded the new wallpapers from the get new wallpaper button, but i downloaded the pics when the active desktop was displaying the worldclock and i think it messed up the wallpapers === in_flames_666 is now known as olie [20:57] dave11: where are the pictures stored (what directory)? [20:58] ign0ramus: the default place(whereever that is) [20:58] i have an audigy 5.1 card can someone tell me how to get 5.1 in kubuntu/ [20:59] dave11: try this: download a picture to your desktop and then try to use it as your background. If it works, your directory locations are just fudged. [21:00] rsc-232: http://ubuntuforums.org/showthread.php?t=184814 [21:00] ign0ramus:it's wierd because only two wallpapers are affected === kappel is now known as kappel_ === kappel_ is now known as kappel [21:01] dave11: then just re-download them (to a directory where you know where they are), and point to that file, and there you go. === shane7 is now known as shane2peru [21:03] ign0ramus: i downloaded them automatically with the get new wallpaper button, I cant uninstall it or download it because i don't know where they downloaded to(how so you uninstall wall papers) === wesley_ is now known as ichigo_nl [21:04] ign0ramus: i think i downloaded the wallpapers into the active desktop folder [21:04] i can't write to my usb key... any ideas? it just gives me an error that writing to the media failed [21:04] dave11: OK, when you are browsing through the wallpapers you just downloaded, what directory are you in???? [21:05] romunov: try reformatting the usb key to FAT32 [21:05] ign0ramus: dosent say, its the background settings window [21:06] dave11: But if you download a picture manually, and set it as background, it works? [21:07] dave11: if you click that little folder-icon button next to where your backgrounds are, what directory does it say you're in??? [21:08] 22:07] ciao a tutti [21:08] [22:07] chi puo aiutarmi ho' installato proprio ora kubuntu [21:08] [22:07] ma amule non va'! [21:09] ign0ramus:gotcha, thanks [21:10] dave11: a simple way would be to go into that directory using Konqueror or Dolphin or whatever, and click on your files to see how they are previewing in another app. [21:10] ign0ramus: it's already in fat32 [21:11] ign0ramus: the two bad wallpapers arent listed in the wall papers folder, must have been saved somewhere else [21:11] dave11: that's why i asked you if you were sure they were still in that directory... :) [21:11] ign0ramus: :) [21:11] romunov: hmm... could be a lot of reasons. try re-formatting again? [21:12] can't i check the filesystem, or something like that, first? [21:12] ign0ramus: yeah you just have you beat me ever the head a few times to get me to figure it out..:) [21:13] romunov: there's a lot you can do, but a format only takes a few seconds, and you can be pretty sure its clean [21:13] dave11: at least you got it. [21:13] be back in a minute... actual work to do ;) [21:14] Hey how do I make something executable with a command? === ichigo_nl is now known as wesley_ [21:14] azzco: chmod +x filename [21:15] Thanks Daisuke_Ido (I've only used konqueror as root before..) [21:16] azzco: i can't say i recommend using konqueror as root, but it's one way of getting things done [21:16] when booting the new Hardy, the sound momentarily 'pops' on boot up before reaching the bios screen. it didn't do this before with Gutsy or any previous release. it seems like a bios problem, but it's rather coincidental to have this problem right when Hardy was freshly installed [21:16] any ideas? [21:16] Daisuke_Ido: Yes indeed. but as you said it might not be the best idea ;) There's no browsing when I do that though but it does the work.. [21:17] Lam_: bios doesn't even know about the OSes [21:17] ign0ramus: it worked [21:17] ign0ramus: thanks [21:18] Kohlrabi: i figured as much. alright. [21:18] Lam_: so you can/did answer it yourself :P [21:19] Lam_: does this happen on cold boot up? [21:19] or only on restarts? [21:19] is there a kde4-window-decorator package for compiz? I want to run compiz for the rotating cube and also use the kde4 window styles [21:19] MAYBE there is still something in the buffer of the card which gets cleared on reboot [21:19] Kohlrabi: lol actually i don't know now. it did about 50% of the time in both cases [21:20] but that's just pure unfounded speculation [21:20] buffer of the sound card though? that seems highly like a design flaw [21:20] how do I search for lost wallpapers? [21:20] i would have noticed something like that before [21:20] oh well. it doesn't do it now for some reason. i'll leave it to gremlins [21:21] how do i search for *missplaced wallpapers [21:22] man.. strigi is confusing [21:23] hi all [21:23] hi [21:24] flaccid? [21:24] does anybody now how does ssh/scp work? [21:24] Danny_: no, i've discovered a wide range of drugs designed to help me combat ED! [21:24] because it says to me that the folder doesn't exist [21:24] I just downloaded and burnt the new kubuntu 8 and when i try and install it it freezes when i choose that option and i have to reboot, any ideas? [21:25] guttata: what command are you using? [21:25] scp site.zip login@adress ssh :folder adress [21:26] guttata: scp size.zip login@address:folder_path [21:26] yes that is [21:26] guttata: e.g. scp size.zip guttata@website.com:/www/site/ [21:26] !strigi [21:26] Services to index files for fast searching include: Beagle (front-ends: beagle, catfish, gnome-main-menu, mozilla-beagle for !GNOME; kerry, kio-beagle for !KDE; beaglefs for !CLI) - Tracker (tracker-search-tool, libdeskbar-tracker for GNOME; tracker-utils for CLI) - Strigi (strigi-applet, strigi-client for KDE, strigi-utils for CLI) - Kat (for KDE) - Pinot (and pinot-applet for GNOME) - Doodle (for CLI) [21:27] I just downloaded and burnt the new kubuntu 8 and when i try and install it it freezes when i choose that option and i have to reboot, any ideas? [21:27] is there a kde4-window-decorator package for compiz? I want to run compiz for the rotating cube and also use the kde4 window styles [21:27] !update [21:27] For upgrading, see the instructions at https://help.ubuntu.com/community/UpgradeNotes [21:28] it says that the folder doesn't exist [21:28] guttata: maybe it really doesn't? [21:29] no lolit is [21:29] ls -l [21:29] it is listed [21:29] guttata: paste the exact command you are using please [21:30] do you speak portuguese [21:30] !portuguese [21:30] Por favor use #ubuntu-br ou #ubuntu-pt para ajuda em português. Obrigado. [21:30] scp site.zip lefran_c@ssh.epita.fr:~/../www [21:30] is [21:30] not speak english [21:30] heheheh [21:31] guttata: ah, '~' will be expanded client-side; is you home directory identical on both client and server? [21:31] oi [21:31] no i want to send folder to the school's ssh [21:31] guttata: try replacing '~' with '/home/lefran_c' or whatever the path to your home directory is [21:32] but this work it 's the folder on my comput which bug [21:33] look on my computer [21:33] when i tapped [21:33] cd bureau for example [21:33] it doesn't work beacause "bureau doesn't exist" [21:34] oh right [21:35] guttata: do "file bureau" [21:35] see what it says [21:36] whait 2sc one thing work [21:37] ahh, how to I put my keyboard to type special letters in Spanish??? [21:37] always buggin for my old command "site.zip:no such file or folder" [21:38] ohhh, never mind, I found it. :) [21:38] bureau: ERROR:cannot open "bureau"(no such file or directory) [21:40] Can someone recommend some USB Audio recording software? [21:41] Hello ! [21:41] This is my 1st time in IRC channel since, hmmm I don't know - like 5 years ! === boris is now known as Milner === Milner is now known as The1 [21:42] !hi | The1 [21:42] The1: Hi! Welcome to #kubuntu! === dario_ is now known as confrey === hagabaka` is now known as hagabaka [21:45] slimeypete [21:51] is there a kde4-window-decorator package for compiz? I want to run compiz for the rotating cube and also use the kde4 window styles [21:53] hellhound: homm3 ftw xD [21:53] guttata: yes? [21:53] DreadKnight: what? [21:53] erm ... heroes 3.. the game >_< darn [21:54] compiz on kde4 looks just fine... [21:55] DreadKnight: for some reason when i run "compiz --replace" so that my cube and rotate cube shows... it is using the kde3 window decorator instead of the kde4 window decorator [21:56] hellhound: im on hardy... i have desktop effects somewhere in the menus... [21:56] DreadKnight: are you running kde4 or kde3.5? [21:56] hellhound: kde4 [21:57] DreadKnight: The desktop effects offered by KDE4 aren't Compiz. They're built in to KWin. [21:57] hellhound: you have compiz too [21:57] DreadKnight: and you are using compiz as in you have run compiz --replace? that seems to be where my problem lies [21:57] Pennycook: you have compiz too xD [21:58] hellhound: you don't need any commands... [21:58] DreadKnight: I don't have compiz. dpkg -L compiz says "compiz is not installed" [21:59] hellhound: system/desktop effects; then click install, enter password, then you can choose some other lever of details etc.. [21:59] DreadKnight: to get the rotating cube I do... there are not any settings in the System Settings -> Desktop -> All Effects for the cube or rotating cube [21:59] Pennycook: you don't have it installed by default, but doing like i told hellhound gets some compiz-kde stuff install as well [22:00] DreadKnight: There's no "Install" button in KDE4's desktop effects tab. [22:00] hellhound: xD oh well, kwin will get cube in august for sure; desktop all is way better then the cube anyway [22:01] Pennycook: i'm not talking about desktop man or kwin xD [22:01] Pennycook: i sayd in the applications submenu called system/desktop effects [22:01] DreadKnight: oh ok so currently kubuntu does not have kde4-window-decorator package available yet? [22:02] DreadKnight: There's no such submenu in KDE4. ...nevermind [22:02] hellhound: i dont really care about spinning cubes, really :\ [22:02] Pennycook: LOL === WestOfHouse is now known as rillo [22:02] Pennycook: not in that control panel thingy; in the "start menu" [22:03] DreadKnight: I know exactly what you're saying. If you have KDE3 AND KDE4 installed, then perhaps it's the case, but it's not a KDE4 feature. [22:04] Pennycook: :-) well yeah i still have remaining parts from kde3... cant get rid of all, yet.. [22:07] How do I make my NTFS disk on SATA HDD mountable for any user? Right now only root can mount it :< [22:09] Areinu: i think you need to change permissions in fstab [22:09] Hmm, alright, I'll try then [22:09] Areinu: Are you sure that only root can mount it? Is it (NTFS disk) in your /etc/fstab file? If so -- comment it in /etc/fstab, [22:10] Areinu: and mount your NTFS disk with Konqueror or Dolphin [22:10] Well, when I try to mount it as my default non-root user it tells me to type root password [22:10] Areinu: Not root password.. but your password [22:10] Areinu: sudo [22:11] well, hmm, I mounted it anyway, but I want it to automount on boot [22:11] Areinu: shouldn't ask for any password if user can mount... [22:11] Can someone recommend some USB Audio recording software? [22:14] I checked /etc/fstab, unmounted disks are only ext3 one, swap, floppy and cdrom [22:14] *uncommented [22:15] how the chat in Spanish? [22:16] when I try to mount other ntsf partition with dolphin I get this message: System policy prevents mounting internal media. Authentication is required to perform this action. Please enter password to verify. === Deviance is now known as TimS [22:16] Areinu, you need to mount as root. [22:16] how the chat in Spanish? [22:16] how the chat in Spanish? [22:16] !sp [22:16] Factoid sp not found [22:16] !es [22:16] Aquí solamente hablamos inglés. Para Español, por favor entre en los canales #ubuntu-es o #kubuntu-es - allí obtendrá más ayuda. [22:17] but I want it to automount :/ [22:17] thanks [22:19] I know I can mount it as a root, but I want it to automount when I log in to my usual account. That's the only thing I didn't configure yet and would make me not use root account except for updates... [22:20] Areinu: add ntfs disk to your fstab. It should looks something like [22:20] what does ctrl+alt+del do? [22:20] Lam_: restart X [22:21] ds187_: isn't that ctrl+alt+backspace? [22:21] hups [22:21] Areinu: /dev/sda5 /media/WindowsC ntfs-3g defaults,locale=en_US.utf8 0 0 [22:21] sorry :-) [22:21] you are right [22:21] that's ok :P [22:21] Areinu: instead of /dev/sda5 put your disk [22:21] Areinu: and instead of /media/WindowsC put location where you want to automount it [22:22] uhm, just before I do that I have 2 questions [22:22] ntfs-3g is subtype of ntfs, right? I'm safe with that? [22:22] Areinu: its just the name of the driver [22:22] ah, alright [22:23] Areinu, ntfs-3g allows for really safe (http://ntfs-3g.org/quality.html) read/write access [22:25] hi [22:25] !hi | survivor [22:25] survivor: Hi! Welcome to #kubuntu! [22:26] i have a little question about network [22:26] !ask [22:26] Please don't ask to ask a question, ask the question (all on ONE line, so others can read and follow it easily). If anyone knows the answer they will most likely answer. :-) [22:26] Areinu: we are waiting for the second question :-) [22:26] ok, I added the correct line, I'll try if it'll work after rebooting, but first I'll read the quality link [22:26] dunno if its the right place [22:26] survivor, we don't know either until you tell us :) [22:27] Areinu, you don't need to reboot [22:27] ok ;) [22:27] Areinu, when you add the line to your fstab, you can simply do: sudo mount -a [22:27] Hi, I want to mount a fat16 USB disk but it keeps saying that fat16 is not supported [22:27] If it mounts, then you're good to go [22:28] so , how can i set my interfaces ethx with given module, do i need to put an alias ? [22:28] ah, great then [22:30] Hi, I want to mount a fat16 USB disk but it keeps saying that fat16 is not supported [22:32] ? [22:33] Okay, it did mount. So that means it will work with each reboot, right? Thanks :) [22:33] thats right [22:36] Hi, /usr/lib/kde4/bin/konqueror always crash on me, is it only me? [22:37] <_CrashMaster_> edgy: I dont care what anyone says. KDE4 is not stable yet. [22:38] salut [22:39] english here ? [22:39] <_CrashMaster_> Yes [22:40] <_CrashMaster_> What language do you need? [22:40] ooops sorry then [22:40] !fr | deckard [22:40] deckard: Ce canal est en anglais uniquement. Si vous avez besoin d'aide ou voulez discuter en francais, merci de rejoindre #ubuntu-fr ou #kubuntu-fr [22:40] <_CrashMaster_> French! Thats what it was. I wasn't sure. [22:40] english not a problem :) [22:40] "salut" sounds french :-) [22:40] yep [22:41] how can i associate one eth with one module ? [22:43] i mean, i want to decide what interface goes to the corresponding module [22:43] is it an alias matter ? [22:43] deckard: yeah... but i'm not sure what file [22:44] neither i :D [22:45] any clue ? [22:45] try /etc/modprobe.d/aliases [22:45] anyone here with a lenevo laptop and having a dual monitor configuration? [22:45] _CrashMaster_: I have yet to see someone who claims it's stable ;) [22:45] i tried but there's no alias for ethx in this file ... [22:46] My brother's Kubuntu setup gets stuck during boot and, unlike Gentoo, F2 doesn't switch to verbose mode. What kernel parameter do I need to feed in? [22:46] only procoles .. [22:46] deckard: erase "quiet" and "splash" [22:46] or boot recovery mode [22:46] Thanks. [22:46] unless its the liveCD === dehui is now known as dehui_ === dehui_ is now known as dehui__ === paolo is now known as paolo_ [22:48] hi. is there a good alternative for devede ? I need a program for making a single dvd composed of multiple avi files [22:50] Ok. Recovery mode is saying "Kernel Panic: not syncing - attempted to kill init" and the caps lock and scroll lock lights are flashing. I'm unfamiliar with this error. [22:50] wow [23:03] Stupid question here but I'm trying to connecting Kubuntu 8.04 to my Zaurus. I see a usb0 interface but I want to configure it. I right click on KNetworkManager -> Manual Configuration. Enter my password and nothing happens. Any ideas why? [23:08] can someone halp me with my internet connection?? [23:17] How do I completely reset nvidia xorg configuration? And no, I don't have backup anymore :( [23:18] <_sourcemaker> where can i find the information... which wlan chipset is supported in hardy... (without ndiswrapper) [23:18] <_CrashMaster_> !wifi [23:18] Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs [23:20] Please, help. My Kubunto has stopped mounting Media Devices ntfs type... [23:21] Hy , got a Q about the volume control of an usb headset (MS LifeChat) - I made the sound to work , but not the volume [23:26] clear [23:27] <_CrashMaster_> Opaque [23:27] transluscent [23:29] <_CrashMaster_> hazy [23:32] Please, can any tell me why my Kubuntu have stopped mounting ntfs devices [23:33] <_CrashMaster_> athlon1: Anything in dmesg? [23:33] Yes, PAM adding faulty module: /lib/security/pam_smbpass.so [23:34] hey people ... where can i find te KUser user administration tool [23:34] *the [23:35] im trying to set up a web cam to work with kopete [23:35] and "PAM adding faulty module: /lib/security/pam_smbpass.so" [23:36] thats what i see in auth.log [23:37] Nothing in the other log files [23:37] <_CrashMaster_> hm [23:38] <_CrashMaster_> Bearing in mind that Im not a linux guru (yet), it seems like maybe you need to reinstall smb. [23:39] Well, i'm going to try... [23:41] HI, I just bought a new screen and with kubuntu, the font in kde are really ugly there is some kind of shadow behind the words... it's hard to decribe but tere is really something wrong. Someone know what I'm talking about and how to fix that ? === Airforce5555 is now known as Soccer5555 [23:43] how do i add myself to the video group using the kuser administration tool? [23:44] any one got any ideas there? [23:45] Reinstalling samba and problem is the same.... [23:45] Any idea? [23:46] <_CrashMaster_> Nope, that was my best shot. [23:46] what was the original problem ? [23:46] dru: just go K --> System Settings --> User Management.........there enter administration mode and hit "modify" [23:46] <_CrashMaster_> Stick around, someone else might be able to answer it [23:46] thanks ds187 [23:47] Thanks Crashmaster. [23:47] athlon1: what happens if you try to mount the ntfs device manually via "sudo mount /whatever/your/device/is" [23:47] athlon1, you have to get rid of the /etc/samba/smb.conf file if the edit's to it have cay=used your problem [23:47] caused [23:47] otherwise reinstalling samba won't make any diff [23:47] why should samba be a problem for not beeing able to mount ntfs devices anymore? [23:48] http://img140.imageshack.us/img140/791/lorezsmileywhoreyd0.png [23:48] But i'm trying to mount locally, are partitions, not shared net. [23:49] athlon1: do your ntfs devices have an /etc/fstab entry? [23:49] other days, they were automatically mounted as "/dev/sda1 /mnt/Part1 fuseblk rw,nosuid,nodev,noatime,allow_other,blksize=4096" [23:50] no, i've nothing about it in fstab [23:50] try "sudo mount /dev/sda1 /mnt/Part1" what does it say? [23:51] if you've nothing in fstab than it won't be mounted automatically [23:51] theres an auto mounter for "ubuntu" kubntu i found it when i googled "automaticly mount hd ubunt". it takes care of fstab entrys for you [23:52] It says it's marked as mounted... "Mount is denied because NTFS is marked to be in use. Choose one action:" [23:52] https://help.ubuntu.com/community/AutomaticallyMountPartitions [23:52] ^ athlon1 [23:53] Thanks dru, i'm reading it... [23:55] athlon1: that message tells you, that the ntfs device wasn't cleanly unmounted the last time, you could use the "force" option as mentioned later in that message [23:55] Yes, and then it works... I've mounted it as "mount -t ntfs-3g /dev/sda1 /mnt/Part1 -o force" [23:56] But days before, it automounted it when in konqueror I clicked in Devices. [23:56] hola [23:57] hi [23:57] hio [23:58] athlon, perhaps your system crashed the other day and so the device wasn't cleanly unmounted and the state remained "in use" and that's why the hd could'nt be mounted automatically because user-intervention was required [23:58] Hello is Kubuntu kde 4.0 upgradeable through the repo's "d-u" up until the final release? [23:59] Yes, it's possible. Now it works fine. I'm going to mount them manually with fstab.