[00:48] <jacoody> I'm having a problem getting my pchdtv card installed for analog use.  The dmesg errors are "[  654.241426] tuner: disagrees about version of symbol tea5767_attach
[00:48] <jacoody> [  654.241437] tuner: Unknown symbol tea5767_attach
[00:48] <jacoody> [  654.241630] tuner: Unknown symbol tda8290_probe
[00:48] <jacoody> [  654.241712] tuner: Unknown symbol tda8290_attach
[00:48] <jacoody> [  654.242050] tuner: disagrees about version of symbol simple_tuner_attach
[00:48] <jacoody> [  654.242053] tuner: Unknown symbol simple_tuner_attach
[00:48] <jacoody> [  654.242102] tuner: disagrees about version of symbol microtune_attach
[00:48] <jacoody> [  654.242106] tuner: Unknown symbol microtune_attach
[00:48] <jacoody> [  654.242310] tuner: disagrees about version of symbol tea5761_attach
[00:48] <jacoody> [  654.242314] tuner: Unknown symbol tea5761_attach
[05:18] <moj0rising> Hello. Is anyone here at the moment?
[10:23] <MythbuntuGuest86> Hallo
[10:24] <MythbuntuGuest86> Just want to find out a bit more about mythbuntu.  Is it hard to configure and understand for a new user?  Is file sharing betwean a winxp and mythbuntu pc possible and finally what IR device do you need to be able to change channels on your decoder?
[10:37] <laga> hello
[10:38] <laga> well, for 1) not sure - depends on you :) but it's supposed to be easy and if you run into problems, there's a lot of ressources
[10:38] <laga> 2) yes, that's possible. it's linux after all
[10:38] <laga> 3) i don't know - these are called "ir blasters"
[10:43] <MythbuntuGuest86> Nice, yeah im kinda new to Linux.  Allways been a windows user, time to port over now.
[10:43] <MythbuntuGuest86> I have tried ubuntu before, but never could manage to get my wireless card to work, its smc.
[10:44] <hads> The MS MCE remotes come with a blaster which is supported by lirc
[10:44] <hads> Easy
[10:44] <laga> depends which version of ubuntu you tried before.. if it doesn't work in ubuntu 8.04, it's not going to work in mythbuntu 8.04 either. but if you tried an earlier version, it's quite possible that it works now
[10:45] <MythbuntuGuest86> Yeah, well if it does not work on the wireless lan I can always use my extra lan cable.  :)
[10:45] <MythbuntuGuest86> MS MCE remote sounds cool.
[10:49] <MythbuntuGuest86> Thanks a lot for the info so far, im going to download the iso tonight and hold thumbs.
[10:58] <MythbuntuGuest86> Ok guys im on my way, will download and report back my experience, thank you.
[13:51] <jmichel> Hi, I think it is an easy question because I already did it 2 months ago on another machine but I can't remeber how: I have a MythBuntu pc with 3 Hauppauge PVR cards and 1 digital ATSC card. Whenever I select LiveTV, the digital card is always the first one to be used but I'd prefer to use the PVR first. I lowered the digital's card priority in mythtv-setup and I made sure the digital card was the last in the list of devic
[14:02] <jacoody> anyone here at the moment?
[14:07] <sabhain> what's your question?
[14:07] <jacoody> I left a log on pastebin but my tuner is conflicting.
[14:07] <jphillip> !ask | jacoody
[14:07] <Zinn> jacoody: Please don't ask if anyone is around or if it is alright to ask a question.  Many people check back periodically and may answer your question when they see it.  IRC is not normally an instant fix so check back often for an answer.
[14:08] <jacoody> I'm trying to use the v4l drivers for analog cable with pc-5500
[14:08] <jacoody> sorry zinn.  i didn't know the protocol.  I asked 13 hours ago so i wasn't sure what to do
[14:17] <jphillip> jacoody no problem, just sometimes people ask if thye can ask and never ask the question
[14:17] <jphillip> if you don't get an answer here you can always try the forums
[14:17] <jacoody> yeah, I tried them and tried everything on the internet :)
[14:17] <jacoody> when I upgrade the v4l-dvb as suggested I get a sound error instead heh
[14:18] <jphillip> you posted in there, or just searched them?
[14:18] <jacoody> posted in ubuntuforums.org
[14:18] <jacoody> and on the mythtv-users email list
[14:19] <jacoody> basically with built in drivers the tuner doesn't work and with the upgrade drivers the sound doesn't work.  I'm not a linux guru so I'm not sure what to do next
[14:22] <jacoody> i'll check back later
[14:23] <jphillip> hey darthanubis
[14:26] <jphillip> ls
[14:27] <jphillip> darthanubis want to run through the process that you are doing to test mythexpot, I was thinking about it and something doesn't seem right
[14:51] <jmichel> Have you seen my question posted right before jacoody?
[14:53] <jphillip> jmichel http://www.gossamer-threads.com/lists/mythtv/users/341861
[14:57] <jmichel> thanks for the link... I'll try the reorder my input as stated
[14:59] <jphillip> you can try the avoid livetv conflicts that is mentioned as well
[15:00] <jphillip> also, when you launch livetv, in the menu you can change the input/source/etc
[15:20] <jmichel> jphillip: I know I can change input once into liveTV but because most of the time I watch analog TV I find it anoying to always change :)
[15:36] <thatdood> you would think it would just remember the last channel AND input you were last on. /shrug
[16:19] <MythbuntuGuest22> hello all...  Setting up a Client box and need assistance selecting a USB Network Adapter
[16:20] <MythbuntuGuest22> Using the DLINK Dir-655;  wanting a Draft-N adapter that is STABLE...  ANY HELP?
[16:21] <MythbuntuGuest22> *Foxbuntu...  You availavle?
[16:22] <foxbuntu> MythbuntuGuest22, Network manager should have no problem with the USB NIC, I use one myself
[16:23] <foxbuntu> MythbuntuGuest22, Why draft-N?
[16:24] <laga> foxbuntu: well, it needs to be supported by linux ;()
[16:24] <foxbuntu> laga, well N spec wireless needs supported by the IEEE first
[16:24] <foxbuntu> ;)
[16:25] <laga> haha
[16:25] <laga> yeah, that's a shame
[16:25] <MythbuntuGuest22> wanting to get the fastest speeds; know there are issues with it in the past
[16:25] <MythbuntuGuest22> not sure if there is anything out yet that is compliant and stable
[16:26] <foxbuntu> MythbuntuGuest22, nope
[16:26] <MythbuntuGuest22> Had the Linksys WUSB300N working but it would error the ports; very unstable...
[16:27] <foxbuntu> MythbuntuGuest22, I am a network engineer and work with Wireless allot, draft N is a big no no in the enterprise world yet
[16:27] <laga> well, for SOHO use..
[16:27] <foxbuntu> still, I personally would stay away until its spec'd
[16:27] <MythbuntuGuest22> Thanks Foxbuntu...  What would you recommend; speed, reliability...  range not so much
[16:28] <foxbuntu> MythbuntuGuest22, the WRT-54G's from linksys seem pretty good
[16:29] <foxbuntu> ASUS has a pretty good g router
[16:29] <foxbuntu> Netgear has a new Open-Source G router
[16:29] <MythbuntuGuest22> So you are saying I should replace the router?
[16:29] <MythbuntuGuest22> It is running pretty damb good
[16:30] <foxbuntu> oh you are just wanting a new card?
[16:30] <foxbuntu> what router do you have?
[16:30] <MythbuntuGuest22> Using the Dlink 655
[16:30] <foxbuntu> any old G card will do
[16:30] <foxbuntu> well
[16:31] <foxbuntu> linksys, dlink
[16:31] <MythbuntuGuest22> im sure any will...  Which gives the most BANG for the buck... you know///
[16:31] <foxbuntu> MythbuntuGuest22, G is G, its a spec
[16:31] <foxbuntu> the expanded speed is based on the router
[16:31] <laga> yeah, but some are cheaper.. and some perform better :)
[16:31] <laga> and the quality of the linux driver varies etc
[16:31] <laga> MythbuntuGuest22: are you going to stream hdtv?
[16:32] <foxbuntu> laga, over g?
[16:32] <laga> well, he wanted draft N initially that's why i asked :)
[16:32] <MythbuntuGuest22> right on....  Not yet, just know I will eventually
[16:32] <foxbuntu> yeah...but everyone does because its supposed to be faster :-)
[16:32] <foxbuntu> lol
[16:33] <MythbuntuGuest22> lol
[16:33] <laga> i don't want it, i can't afford it ;)
[16:33] <foxbuntu> laga, yeah...but your the exception to the rule
[16:33] <laga> ouch!
[16:34] <foxbuntu> haha
[16:34] <MythbuntuGuest22> liked what the DIR-160 offers....  pricy ($74) there are issues installing on Hardy; from what I have read.  That was the reasoning..
[16:34] <foxbuntu> laga, its alright though...I havent made any shots at germans latley]
[16:34] <laga> MythbuntuGuest22: you could always buy another draft-n router and use that as a bridge.. that's probably more expensive, tho
[16:35] <MythbuntuGuest22> Thats an idea laga.  Would not need to worry about drivers than....
[16:36] <MythbuntuGuest22> laga:  thanks for the thought; will check into that...
[16:36] <foxbuntu> MythbuntuGuest22, or...you could do like I did, just have a long arse cat5 cable laying on the floor
[16:37] <MythbuntuGuest22> In an apartment (family owned) and dont want to drill the wall...  Think I like the bridge idea!  Ok, got to get to work now..... THANKS FOXBUNTU and LAGA.  You guys are great!!!
[16:38] <laga> make sure the AP supports bridging mode ;)
[16:38] <laga> have fun at work
[16:38] <foxbuntu> later
[16:38] <MythbuntuGuest22> cya
[16:39] <jphillip> streaming over wifi is a mess :)
[19:29] <ownatsch__> hi, i have a hauppauge hvr-4000 card, installed the multifrontend drivers, i managed to run a successful scan but apparently i'm not abled to get the thing working in mythtv or even get a picture in mplayer, could someone help me out here?
[21:22] <SHADOW__X> hello
[21:22] <SHADOW__X> i have my hauppauge hvr-1800 working in linux
[21:23] <SHADOW__X> tvtime and mplayer work with analog
[21:24] <SHADOW__X> but when i try and use it in mythtv it doesnt work right if i use tvtime or ivtv-tune to tune to a channel i can watch that channel on the front end but it wont know what c hannel i am on and changing the channel just makes it hang
[21:40] <zabbadapp> SHADOW__X: can you scan for channels in mythtv-setup? does it find any?
[21:42] <SHADOW__X> yup
[21:42] <SHADOW__X> that works fine
[21:43] <zabbadapp> so what does arrow up/down do in myth-frontend while watching tv (should change channel)
[21:43] <SHADOW__X> nope
[21:44] <SHADOW__X> it doesnt know what channel its on
[21:44] <SHADOW__X> if i change the  channel it just hangs
[21:44] <SHADOW__X> i can just goto a channel i have to first use tvtime or ivtv-tune to tune to a channel then the channel i tuned to will be availble in myth
[21:44] <SHADOW__X> but it wont know what channel its on and it cant change the channel
[21:48] <zabbadapp> can you change channel using the v4lctl command? if that works, you could as a workaround use what is called "external change command" in myth-setup to call a script that will do "v4lctl -c /dev/video0 setchannel $1" for you.
[21:57] <SHADOW__X> zabbadapp: i already wrote a script using ivtv-tune
[22:00] <zabbadapp> ah, ok ... can you change channel that way from the command line?
[22:00] <SHADOW__X> yes
[22:00] <SHADOW__X> but that wont work in myth
[22:30] <SHADOW__X> zabbadapp:  any ideas
[22:34] <zabbadapp> are you using $1 as the channel passed from mythtv correctly? (first argument)
[22:36] <SHADOW__X> #!/bin/sh
[22:36] <SHADOW__X> /usr/bin/ivtv-tune -tus-cable-hrc -d/dev/video2 -c $1
[22:36] <SHADOW__X> thats the script
[22:51] <SHADOW__X> should i make a script like the one you said but i couldnt use your command
[23:16] <SHADOW__X> zabbadapp: you there
[23:17] <zabbadapp> hmm .. but that script works for you on the commandline?
[23:18] <SHADOW__X> yup i just type analog.sh 72 and that works
[23:21] <SHADOW__X> also where it says external channel change command i have /usr/local/bin/analog.sh then the next line where it says preset tuner to channel is blank
[23:22] <zabbadapp> are the permissions correct? try to add a line: echo 'hello from channel change script' > /tmp/alive.txt  ... in there to see if it actually executes
[23:22] <SHADOW__X> alright
[23:23] <SHADOW__X> i also made the file permissions for everytone
[23:23] <zabbadapp> rwx for all?
[23:23] <SHADOW__X> mhm
[23:23] <zabbadapp> or rx atleast :-)
[23:23] <SHADOW__X> everything for everyone lol
[23:24] <SHADOW__X> although i need root access to edit the file
[23:33] <SHADOW__X> zabbadapp:  it doesnt run
[23:48] <zabbadapp> no wonder you can't change the channel
[23:50] <SHADOW__X> right
[23:50] <SHADOW__X> why isnt it running the script
[23:50] <SHADOW__X> i can run it in terminal
[23:56] <SHADOW__X> any suggestions