[00:04] what was it called [00:06] Envive, i met the guys who developed it, but it is not open source. [00:06] http://www.enviveit.com/ [00:09] interesting [00:09] boxee is open source [00:09] and elisa too [00:09] i added songs to mythmusic and then deleted them from the SMB share... how do i remove them from the mythmusic browser? [00:09] scan for music [00:10] MythbuntuGuest36, skin != interface [00:10] really? that simple.... i'm so dumb sometimes [00:10] skin ! [00:11] tgm4883: ? [00:11] a skin, usually isn't thought of as the same thing as an interface [00:12] a skin would be like a theme [00:12] where as an interface, would be like a whole different program [00:12] oh, i meant skin. not so much interface [00:13] heh [00:13] envive is a feminine hygene product in europe [00:14] that is hilarious, i will have to tell my buddy. he is friends with their CTO. [00:14] are there more skins available? [00:15] well there are more themes available [00:15] http://www.mythtv.org/wiki/index.php/Category:Themes [00:15] there are also themes installable from mythbuntu-control-centre [00:16] ya i got the ones from control centre, i will check out the other, thank you [00:36] can anyone here help me find the configs i need to run a mythbuntu frontend off a live disk connectec on wifi ? [00:39] when i look at the setup on the backend it shows host as 127.0.0.1 and when i enter that and the password i get a can not find server [00:40] backend is connected by a lynksys router and the frontend i want to connect is connecting to the router with a linksys 8.11g card [00:43] !help [00:43] Use ! followed by a topic to get help on the topic (if it exists) example: !logs. Other available commands: !status, !about, !bug [bug_number]. For a complete list of my knowledge visit: http://www.baablogic.net/Zinn.cgi [01:05] hi all [01:05] can mythbuntu run on an xbox? [01:06] as a frontend that is? [01:18] yes xbox can from what i read .. google "xbox mythtv" [01:29] Steven_M, Mythbuntu cannot, however you can run an run xbmc on an xbox [01:29] and that has mythtv support built in if you run svn [01:37] Hi all, This may be more of a general Linux question, but I'm most interested in getting this working on Mythbuntu: I'm trying to get Mythbuntu 8.04 running with a Twinhan 1027 DVB-S card. I'm having difficulty getting the card drivers installed. There are drivers available on the Twinhan (Azurewave), but unfortunately they work with an older linux kernel only. I've attempted to modify the available v4l drivers by modifying the cx88-dv [01:37] b.c and cx88-cards.c files on linuxtv, and also using the tuner modules included with the Twinhan drivers, but still no joy. dmesg claims the card is autodetected upon reboot, but if I try to reload the module cx88-dvb.c, then I receive a mass of unknown symbol errors. If anyone has any experience with getting 1027 working, or can point me in the right direction, your help would be appreciated!! Tx === wsuetholz_top_ is now known as wsuetholz_top [01:53] will Zinn respons if I ask for a refund on mythbuntu? [01:53] !refund [01:53] For your refund, please pm me your SSN, your bank account number, your birthday, your mothers maiden name, the credit card number that you wish your refund to go back to, your dogs name, your neighbors kids favorite movie, and a twix bar [01:53] why do you need a refund? [01:54] I saw it on http://www.baablogic.net/Zinn.cgi and just wanted to know if these were triggered within sentences or required an !, and I thought it was funny [02:20] tgm4883_laptop: sorry I was away from my computer. how well does mythtv run through xbmc? === wsuetholz_top_ is now known as wsuetholz_top === Eclipse is now known as jd153 [02:53] Hi Guys, I have a WinTV-NOVA-S, a valid Dish Network CAM, a CAM Module, and an Ubuntu machiene. Would it be possiable to make this box into an IRD? [02:54] Steven_M, it runs as good as the xbmc because that is the interface youa re actually using [05:20] I've tried following the guide for mythbuntu on dvbn. However, after compiling the mythtv packages, I cannot log in to the MySQL database. Whether I log in as root or my username, with or without password, I am denied. [05:24] mysql -u mythtv -p mythtv ? [05:26] access denied [05:26] if all else fails you can open up access to localhost in your mysql conf file [05:28] how do I do that? [06:02] does mythtv burn back ISO's of ripped DVD's ? [06:07] anyone ? [06:13] IOU|S: I'm a newbie sorry [06:23] where can I find deinterlacing settings [06:23] ? [07:30] IOU|S, look at mytharchive [09:33] hi, I've got a bit of a newb question [09:35] I installed mythbuntu 8.04.1 and when I watch live TV on mythtv the video and audio are WAY out of sync; I installed TVTime on the same machine and the video and audio are in sync. Where should I look to fix this sync issue in mythtv? [11:40] hi [11:42] I got a problem switching channels on my mythtvfrontend.real program [11:43] using a ivtv driver [12:58] HI I'd like to buy a tv tuner card I ound a asus p7131 hybrid is it working on linux ? [13:16] Hello, I'm having a problem with HAL not responding to querys.. PasteBin @ http://pastebin.ubuntu.com/46592/ [15:20] hey all. just trying out Mythbuntu. Can someone explain how self-replication works? do i have to install Mythbuntu on each machine? or just on my backend machine? if so, how do i then access Mythbuntu on my other machines? thanks :) === wsuetholz_top_ is now known as wsuetholz_top === wsuetholz_top_ is now known as wsuetholz_top === wsuetholz_top_ is now known as wsuetholz_top === wsuetholz_top_ is now known as wsuetholz_top [16:58] hey tgm4883_laptop [16:59] tgm4883_laptop: for now I'm using vlc+ ivtv-tune to watch tv remotely :-\ [17:03] well thats no deal [17:03] what happened? [17:23] tgm4883_laptop: mythfrontend still just doesnt change channels [17:23] oi famicom [17:24] yo [17:24] whats up [17:40] famicom: trying to get free football working, and trying to fix zapping in mythfrontend on my sertup [18:23] tgm4883_laptop, I have a strange error with mythweb here. actually I think it could be apache related but I'll give it a try [18:24] what do you need to type under config to make irxevent launch an application with a button press [18:24] Mythweb weather loads fine except for images, they "half-load". some pictures are visible but the rest not and then the sqript seems to quit [18:24] http://www.freeimagehosting.net/image.php?8d244a28a0.png [18:25] [Sat Sep 13 18:50:06 2008] [error] [client 91.126.96.52] Directory index forbidden by Options directive: /var/www/mythweb/skins/default/img/weather/, referer: http://xxxxxxxx/weather [18:25] no clue how this can happen [18:44] tgm4883: no clues about my channel switching problem? [18:47] datadevil, you have a pvr-150 hooked directly up to cable. It's probably the most common tuner and the most well supported. It works OOTB in every install i've seen. My only assumption is that you are fouling up the setup somewhere [18:47] thats probably not what you wanted to hear though [18:47] nope :-) [18:47] did you follow any guides? [18:48] tgm4883: no, but I used mythbuntu (installed from livecd) [18:49] right, i'm just wondering if you messed up in the setup or if it's a channel problem [18:49] cause you don't use guide data right? [18:49] tgm4883: yeah [18:49] can you take a screenshot of your channel table in mythweb? [18:49] tgm4883: is there a way to reset everything to the state where mythbuntu would normally start? [18:50] eh..yeah [18:50] do that then imagebin it [18:52] http://imagebin.org/26356 [18:55] datadevil, can I see new backend logs too? [18:59] http://pastebin.com/df39c79f [19:02] the only things that look wrong are that it says it's recording channel 1022, which you don't have, and that the audio is on the wrong sample rate [19:02] the channel thing might cause this, but I don't think the audio would [19:05] so i'd go back into mythtv-setup, and make sure that the starting channel number for your tuner is a valid one [19:05] also check the audio sampling rate [19:05] 48000 Hz [19:06] if neither of those work, i'd try looking for help in #mythtv-users cause I'm stumped [19:07] anyone know how to tell lirc to launch an application using irxevent? [19:09] has any one here used an all in wonder card radeon 128 meg [19:09] ajhtiredwolf, here is an entry in lircrc that uses irexec http://mythbuntu.pastebin.com/m68b471b9 [19:11] tgm4883_laptop: thanks anyways [19:12] Cool has the same remote as me even... but sadley doesnt work :( [19:12] ajhtiredwolf, it shouldn't work for you, it calls a script I made ;) [19:13] tgm4883_laptop, ohhh, so you have to write your own script and then tell it to launch that script? [19:14] you don't have to I don't think, what are you trying to launch? [19:14] I just want it to launch elisa [19:14] ah [19:14] IIRC, once you put that command in there, you need to reboot [19:14] you need irexec to load [19:15] it's been awhile since I set this up, but IIRC, irexec doesn't load unless it sees that command in lircrc during boot [19:15] you may be able to start it manually though [19:15] mm [19:15] the guide on my myth box is really slow some times is act like it's locked up does ever one have that issue [19:15] i think you could just sudo /etc/init.d/lirc restart [19:15] couldnt you? [19:15] perhaps [19:16] !help [19:16] Use ! followed by a topic to get help on the topic (if it exists) example: !logs. Other available commands: !status, !about, !bug [bug_number]. For a complete list of my knowledge visit: http://www.baablogic.net/Zinn.cgi [19:16] !slow guide | ron [19:16] ron: If you have a slow guide in Live TV, this is most likely due to the bob deinterlacer. Please try disabling this deinterlacer and test again. If this is the case please report back. [19:16] http://mythbuntu.pastebin.com/m7a84a59c [19:17] tgm4883_laptop, look correct? [19:17] Unfortunately its still nto working [19:17] no thats wrong [19:17] you don't need start-elisa [19:18] you justneed elisa [19:18] just elisa? [19:18] k [19:18] Crap still didnt work [19:19] elisa? [19:19] last time i looked, this channel was about mythtv ;) [19:19] ron: do you want to test a fix for the slow guide? [19:19] sure [19:20] tgm4883_laptop, just changed config = elisa but that didnt seem to help [19:20] ron: see https://bugs.launchpad.net/mythtv/+bug/229949/comments/28 [19:20] ron: add my PPA to your sources.list. if it works, please say so in the bug report [19:21] laga_, what do you need to do to start irexec? [19:21] good deal thanks ans will do [19:22] tgm4883_laptop: irexec will start automagically if you've got irexec mentioned in your lircrc somewhere AFAIK [19:22] laga_, right, but what about starting it manuallY/ [19:24] just start "irexec" and it should work [19:24] ajhtiredwolf, ^ [19:26] cool irexec -d seemed to do it [19:26] thanks much [19:28] tgm4883_laptop, are you using any keys named Xf86... ? [19:28] nope [19:29] darn, that seems to be what play play and pause and volume etc. keys are named [19:29] But binding the remote keys to them doesnt seem to work [19:34] meh oh well, il just configure per application. When pressing a remote button in mythbuntu does it cause anyone elses myth to freeze up for a second then execute the command? === wsuetholz_top_ is now known as wsuetholz_top [20:33] hello all [20:33] i m here because i need help to set up HDMI audio [20:33] i use an hdmi cable to connecter a motherboard MSI F9AMG2 to my tv [20:34] video is good but i havent sound [20:34] i check all forums but it don t find how to set up the sound to this hdmi [20:35] someone can help me please [21:14] hello [21:17] which adapter can be recommend for dvb-s2 (hdtv) with up to 1080i? [21:53] hello all...I'm trying to figure out how to add an application to startup so that it loads when the system is rebooted [22:01] must the cut list of a recording be "clean" to work with mytharchive? i.e. [----]---] cuts are allowed? (start-cut, end-cut, another end-cut) [22:02] any takers? [22:02] can someone tell me how to add a program to the startup for the system [22:02] no menu options in xfce and I don't know where to put it [22:02] i get "failed when running mythtranscode to remove commercials" (or something like that) [22:04] in ~/.config/autostart ... put a desktop-shortcut file there to whatever you want to start [22:04] spo0ner: ^^^ for you [22:04] sweee [22:04] sweet even [22:05] thanks [22:05] been driving me crazy [22:05] my autostarting items were created via the GUI that existed in 7.10, but seems to be gone in 8.04 [22:05] yeah...I don't see an easy menu-based way of doing it [22:06] like in ubuntu you can just add it to your session [22:06] but I have edited them since they're just simple textfiles [22:08] i.e. the files start with "[Desktop Entry] \n Encoding=UTF-8 \n .... \n Name=VNC \n Exec=/usr/bin/vncserver \n Terminal=false" ... and so on [22:08] and are called "VNC.desktop" for instance [22:08] probably what you get by creating a desktop shortcut (haven't actually tried) [22:15] Now I removed the cutlist and the mythtranscode still failed (why it even runs it I don't know, it says "cleaning up", but what? I don't want it reencoded) [22:53] for the record, it was the ~/.ICEauthority file that was needed to be removed [23:43] hello all again... I have a fresh mythbuntu 8.04 installation and seem to have a problem with the Music import function [23:43] I have the Music folder on a network share and mounted via nfs [23:43] from the cli I can see everything [23:44] but all my music is divided in to directories [23:44] It seems like it's not scanning any further down the tree than just the Music directory...it's not going in to the sub-folders [23:44] is there a way to correct this? [23:45] am I doing something wrong? [23:46] or is this the normal behavior for the myth setup? [23:47] there are also music files in that directory but it's not recognizing them for some reason