[00:05] <Tooncis> LonEagle, I don't know where to change the volume you are speaking of, but using my remote it is at 100%.
[00:17] <ajhtwolf> anyone around?
[01:05] <Tooncis> I guess this isn't really the place to go for help.
[01:08] <hads> Depends on your attitude.
[01:08] <hads> ajhtwolf: Start mythfrontend from a console and see what it says.
[01:10] <ajhtwolf> hads, I did mythfrontend -p earlier and selected a different mysql password ( the correct one ) and now it says this http://pastebin.ca/1264729
[01:11] <ajhtwolf> hads, in the front end it says no upnp packets found, then when i press next next it says cannot log into database
[01:11] <ajhtwolf> hads actually cannot log into database ?
[01:12] <hads> This is a remote frontend?
[01:13] <ajhtwolf> hads, right, I have the frontend on this machine adn the backend on a different machine
[01:13] <hads> OK, do you know if mysqld is listening for connections from your network on the backend?
[01:14] <ajhtwolf> hads, not sure, how might i check that?
[01:14] <hads> Try connecting to it from the command line on the remote frontend e.g. `mysql -h back.end.ip -p mythconverg`
[01:16] <ajhtwolf> ERROR 2003 (HY000): Can't connect to MySQL server on '192.168.0.7' (111)
[01:16] <ajhtwolf> after i entered the password
[01:17] <hads> OK, the mysql server needs to listen to the network, it only listens to localhost by default.
[01:17] <hads> On the backend you need to edit /etc/mysql/my.cnf
[01:18] <hads> Change the line "bind-address 127.0.0.1" to "bind-address 0.0.0.0"
[01:18] <ajhtwolf> hads rightio, one sec
[01:18] <hads> and then restart mysql with `sudo invoke-rc.d mysql restart`
[01:23] <ajhtwolf> hads, alrighty, now it just says error access denied
[01:23] <ajhtwolf> hads, sounds like progress
[01:23] <hads> That's progress :) You might need to connect as user mythtv
[01:23] <ajhtwolf> hads, good call
[01:23] <hads> mysql -u mythtv -h back.end.ip -p mythconverg
[01:24] <hads> You'll also need to go into mythtv-setup on the backend (the general settings) and make sure the master backend is listening to 192.168.0.7 rather than 127.0.0.1
[01:24] <ajhtwolf> hads, alright still denied, im wodnering if this is the right password
[01:24] <ajhtwolf> hads, that part i already changed
[01:24] <hads> Cool
[01:25] <ajhtwolf> hads, master backend and local
[01:25] <ajhtwolf> hads, let me go make sure this is the right pass one sec
[01:25] <hads> cat /etc/mythtv/mysql.txt on the backend
[01:26] <ajhtwolf> hads, alright good news it let me in
[01:27] <hads> Cool, you should be good to go then
[01:27] <iuaudio> Anyone know the status of weekly builds for intrepid?
[01:28] <ajhtwolf> hads, awesome seems to be working although i lost all my previous front ends settings. No problem though that is easily redone
[01:28] <ajhtwolf> hads, thanks a bunch hads. Really appreciate it
[01:28] <hads> No worries :) The settings are based on the hostname, there is a way to copy them if you really need.
[01:29] <ajhtwolf> hads, only thing is im not getting audio but il do some tinkering firist and see if i can figure it out
[01:44] <wombo2> where can I get my mySQL password from?
[01:47] <wombo2> dont worry I did a 'locate mysql.txt'
[02:38] <ARob109> Linux Noob needs help: went to mythbuntu.org and installed mythbuntu by clicking add to Ubuntu. When I open mythTv, the program fail to render properly. It opens as full screen garbage and I have to restart the computer to close out of it because I can't see anything.
[02:59] <wos> rhpot1991_laptop, are you here?
[03:00] <wos> can anyone help me with my Hauppauge WinTV HVR 950Q
[03:07] <[[Hauppauge> Hauppauge WinTV HVR 950Q
[03:15] <rhpot1991_laptop> wos: whats up?
[03:15] <wos> hey its me, mee
[03:16] <wos> rhpot1991, i installed mythtv on a laptop and it doesnt recognize the adapter either
[03:16] <rhpot1991_laptop> same adapter?
[03:16] <wos> rhpot1991_laptop, i meant
[03:16] <wos> yes
[03:17] <rhpot1991_laptop> well its prob cause support isn't built into the intrepid kernel, so you most likely need to make a kernel module yourself
[03:17] <wos> well they have drivers for the Hauppauge WinTV HVR 950
[03:17] <wos> but this is the Hauppauge WinTV HVR 950Q
[03:18] <wos> and it has QAM
[03:18] <wos> should the drivers work
[03:18] <wos> ?
[03:19] <rhpot1991_laptop> hmmm ya I see that they might be different hardware
[03:19] <wos> do you know what QAM is ?
[03:19] <rhpot1991_laptop> yep
[03:19] <wos> should the drivers work?
[03:20] <rhpot1991_laptop> http://www.mythtv.org/wiki/index.php/QAM
[03:21] <wos> ok thank you but that doesnt help answer my question
[03:22] <rhpot1991_laptop> I dunno I don't have one, I'm looking around now
[03:22] <wos> ok thanks!
[03:28] <rhpot1991_laptop> wos: well I can't find anything 950q specific, your best bet is to try to go with the 950 instructions and see what happens I guess
[03:29] <rhpot1991_laptop> I see links to this but its not currently loading for me : http://u32.net/MythTV/WinTV-HVR-950/
[03:29] <wos> isnt that what we sis last night
[03:29] <rhpot1991_laptop> there is this too (which I believe you were using last night) http://www.mythtv.org/wiki/index.php/Hauppauge_WinTV_HVR-950
[03:29] <wos> did*
[03:29] <rhpot1991_laptop> I dunno tgm4883_laptop was helping you last night, I wondered away to do some work
[03:31] <rhpot1991_laptop> you can pay attention to this as well: http://ubuntuforums.org/showthread.php?t=990429&highlight=hvr+950
[03:31] <rhpot1991_laptop> no responses yet though
[03:34] <wos> hmmm
[03:34] <wos> thats too bad
[03:35] <wos> rhpot1991_laptop, could i run the tv in a virtual windows box?
[03:35] <rhpot1991_laptop> wos: why not try those 950 steps first?
[03:35] <wos> i did
[03:35] <rhpot1991_laptop> didn't work?
[03:35] <wos> oh wait
[03:36] <wos> i havent tried it for ubuntu
[03:38] <rhpot1991_laptop> wos: http://www.uluga.ubuntuforums.org/showthread.php?t=990185
[03:44] <wos> rhpot1991_laptop, me@me-laptop:~/HVR950$ ./extract_xc3028.pl
[03:44] <wos> bash: ./extract_xc3028.pl: Permission denied
[03:44] <wos> me@me-laptop:~/HVR950$
[03:46] <wos> rhpot1991,
[03:46] <wos> rhpot1991_laptop,
[03:47] <rhpot1991_laptop> wos: you might need to chmod +x it
[03:48] <rhpot1991_laptop> sudo chmod +x extract_xc......
[03:49] <rhpot1991_laptop> wos: I gotta run, good luck, I'll check back later
[03:49] <wos> wait!
[03:50] <wos> rhpot1991_laptop,  wait!
[03:50] <wos> rhpot1991,
[04:02] <wos> is anyone here that can help me
[04:18] <Joshooa> Hi Everybody
[04:19] <Joshooa> No one on? I'm having problems with my frontend not connecting to my backend, it just hangs there
[04:26] <wos> hi joshooa
[04:27] <wos> could anyone help me
[04:51] <Joshooa> hi
[04:51] <Joshooa> oh nvm
[07:40] <wos> anyone in
[07:41] <wos> mythbuntu has to be the most user unfriendly computer tv service on the planet
[07:42] <foxbuntu> wos, thats the way to make sure no one wants to help you, perhaps you would be better suited with: http://www.microsoft.com/WindowsXP/mediacenter/default.mspx and paid support
[07:43] <wos> hell no
[07:43] <Zinn> wos: Please watch your language.
[07:43] <wos> watch your language
[07:43] <wos> lol
[07:43] <rhpot1991> wos I'm told the 950 should work with intrepid, all you need to do is load the firmware
[07:44] <rhpot1991> that being said no one is aware if the 950 and 950Q are the same hardware and a different firmware or what the deal is
[07:44] <wos> i loaded the firmware
[07:44] <rhpot1991> so you willl either need to experiment or wait for someone else to figure it out
[07:44] <wos> myth tv keeps saying "cannot login to data base?"
[07:44] <rhpot1991> !mysql | wos
[07:44] <Zinn> wos: If you are having problems connecting to your mysql database, you can perform the following to reconfigure it: 1. sudo dpkg-reconfigure mysql-server-5.0 (pay attention to the root password you set, you will need it for the next step) 2. sudo dpkg-reconfigure mythtv-database 3. sudo dpkg-reconfigure mythtv-common
[07:45] <wos> rhpot1991, why do i need a database just to watch tv?
[07:45] <wos> thats all i want to do
[07:45] <rhpot1991> wos: its how mythtv keeps track of everything
[07:45] <rhpot1991> it keeps your live tv around incase you want to keep it
[07:46] <wos> you mean drivers and such?
[07:46] <rhpot1991> can be turned into a recording
[07:46] <wos> i dont care about that though
[07:46] <rhpot1991> well mysql houses everything in mythtv, configurations, recordings, listing data, etc
[07:46] <wos> for now i just want to see if i can get it to play tv
[07:46] <wos> tune tv that is
[07:46] <rhpot1991> sounds like mythtv isn't the right choice for you then, maybe you just need vlc/mplayer pointing at your tuner
[07:46] <wos> oh ok
[07:47] <wos> how do you do that?
[07:52] <rhpot1991> you can do something like this if all you want to do is check your tuner:
[07:52] <rhpot1991> http://www.mythtv.org/wiki/index.php/IVTV_Install#Testing_the_installation
[07:55] <wos> cat /dev/video0 > my.mpg
[07:55] <wos> me@me-laptop:~$ modprobe ivtv
[07:55] <wos> WARNING: Error inserting v4l2_common (/lib/modules/2.6.27-7-generic/kernel/drivers/media/video/v4l2-common.ko): Operation not permitted
[07:55] <wos> WARNING: Error inserting cx2341x (/lib/modules/2.6.27-7-generic/kernel/drivers/media/video/cx2341x.ko): Operation not permitted
[07:55] <wos> WARNING: Error inserting i2c_algo_bit (/lib/modules/2.6.27-7-generic/kernel/drivers/i2c/algos/i2c-algo-bit.ko): Operation not permitted
[07:55] <wos> WARNING: Error inserting compat_ioctl32 (/lib/modules/2.6.27-7-generic/kernel/drivers/media/video/compat_ioctl32.ko): Operation not permitted
[07:55] <wos> WARNING: Error inserting v4l1_compat (/lib/modules/2.6.27-7-generic/kernel/drivers/media/video/v4l1-compat.ko): Operation not permitted
[07:55] <wos> WARNING: Error inserting videodev (/lib/modules/2.6.27-7-generic/kernel/drivers/media/video/videodev.ko): Operation not permitted
[07:55] <wos> FATAL: Error inserting ivtv (/lib/modules/2.6.27-7-generic/kernel/drivers/media/video/ivtv/ivtv.ko): Operation not permitted
[07:55] <wos> me@me-laptop:~$ cat /dev/video0 > my.mpg
[07:55] <rhpot1991> !pastebin | wos
[07:56] <Zinn> wos: when pasting more than 5 lines of data please use http://mythbuntu.pastebin.com so you don't flood the channel.  Then please post the link in the channel.
[07:56] <wos> rhpot1991, what does all that mean?
[07:58] <rhpot1991> you need to sudo modprobe first of all
[07:58] <wos> oh ok
[08:00] <wos> cat /dev/video0 > my.mpg
[08:00] <wos> me@me-laptop:~$ cat /dev/video0 > my.mpg
[08:00] <wos> cat: /dev/video0: No such file or directory
[08:00] <wos> me@me-laptop:~$ sudo cat /dev/video0 > my.mpg
[08:00] <wos> cat: /dev/video0: No such file or directory
[08:00] <wos> me@me-laptop:~$
[08:00] <wos> 5 lines
[08:01] <rhpot1991> do ls -la /dev/video*
[08:01] <wos> me@me-laptop:~$ ls -la /dev/video*
[08:01] <wos> ls: cannot access /dev/video*: No such file or directory
[08:02] <rhpot1991> your tuner is not installed correctly then
[08:02] <rhpot1991> or the 950q isn't close enough to the 950
[08:02] <rhpot1991> you might need to find a specific 950q firmware since the one you used was for the 950
[08:03] <wos> where would i find that?
[08:03] <rhpot1991> google it, I don't know sorry
[08:03] <wos> ok
[08:05] <rhpot1991> wos I'm told a DVB device might not show up as /dev/video as well, so you may want to research that some
[08:06] <wos> ok.
[08:06] <wos> thanks
[08:19] <LonEagle> boy seeing questions like that makes me glad i just got a hdhomerun.  i used to have to dork around with ivtv too much
[08:19] <LonEagle> nothing quite like just having it use your already-recognized-and-configured eth0 :P
[09:18] <hads> IVTV doesn't take much "dorking around"
[09:28] <LonEagle> hads: i was bleeding edge on pvr150 back when those cards were new.
[09:28] <hads> Okay, hasn't been that way for quite some time now.
[09:29] <LonEagle> nope i know.
[09:29] <LonEagle> but then again, i needed to migrate to atsc anyway
[09:34] <LonEagle> my satellite-using friend gave me some good money for my pvr150
[09:35] <hads> I use one for capturing from my Sky box, otherwise mostly DVB-S
[09:39] <LonEagle> you've got dvb
[09:39] <LonEagle> lucky.
[09:39] <hads> Indeed, other end of the world :)
[09:40] <LonEagle> well at least we can do atsc now.
[09:40] <LonEagle> regardless of the sillyness of the modulation
[09:41] <hads> We only have HD over DVB-T here which is interlaced H264 with HEAAC so I'm stuck with SD at the moment.
[09:42] <LonEagle> what's wrong with that?
[09:42] <LonEagle> no linux codec?
[09:42] <LonEagle> better than mpeg2 i'd think
[09:43] <hads> Yeah, codecs aren't quite there yet.
[09:44] <hads> I think it's only Norway and NZ that are using that.
[09:45] <Dennis> when i want to watch tv the picture freeze, the sound is ok. Why?
[09:49] <LonEagle> hads: someday they will be. and you will be better off than i.
[09:50] <hads> Yeah, not something I have the skill to help with unfortunately but it's only a matter of time.
[09:50] <LonEagle> yup
[15:11] <larstr> I've just installed a Nova-T-500 card in my mythbuntu 8.10 system and the card was recognized immediately
[15:11] <larstr> but now when I play videos, they are not playing perfectly anymore
[15:12] <larstr> they lag at a given interval
[15:12] <larstr> could it be an interrupt problem or something like that?
[15:24] <larstr> I also haven't got the remote or the tv working yet.. Not sure what the problem about the remote is (the config for the remote included in mythbuntu 8.10 looks fine), but the reason I can't watch TV I think is that it compains about not being able to download a program guide
[16:41] <anodesni> Hi, I am trying to get my pctv stereo card working for tvtime, I get picture but no sound only (white) noise
[16:41] <anodesni> How can I fix this?
[17:59] <android60> i have nvidia-glx-177 installed but Iget "Ubuntu is running in low graphics mode" No devices detected
[19:32] <MythbuntuGuest38> can I play .iso on Mythbuntu?
[19:37] <rhpot1991_laptop> MythbuntuGuest38: as in a dvd?
[23:10] <MythbuntuGuest24> hello, when I run the latest mythbuntu installer I loads command prompt. How do I launch the GUI installer? Thanks