[00:44] <ericrost> how do I reconfigure the mysql permissions for mythbuntu?
[00:45] <foxbuntu> ericrost, what permissions?
[00:46] <ericrost> I was over in mythtv-users and ended up at running  mysql -u mythtv -p mythconverg and getting ERROR 1045 (28000): Access denied for user 'mythtv'@'localhost' (using password: YES)
[00:47] <ericrost> my backend can't connect to the database as mythtv now has no permission to connect to the mysql database
[00:47] <ericrost> i had the backend lockup and had to reboot
[00:47] <foxbuntu> ericrost, an easy method to verify permissions is with phpmyadmin
[00:47] <ericrost> when it came back up, no backend
[00:48] <ericrost> the recommendation from the user in mythtv-users after asking me to run several commands was to ask in here how to reset the mysql permissions
[00:48] <ericrost> for mythbuntu specifically since they do it differently
[00:48] <foxbuntu> uh
[00:49] <foxbuntu> no
[00:49] <ericrost> so what would you do given that output?
[00:49] <foxbuntu> it can be done the same way
[00:49] <evaryont_> I'd like to uninstall lirc (and replace it w/ a later compiled version w/ a few patches) w/o uninstalling mythbuntu-lirc-generator (which lists lirc as a dependency)
[00:49] <ericrost> what would you recommend foxbuntu?
[00:50] <foxbuntu> ericrost, you can try this: sudo dpkg-reconfigure mythtv-database mythtv-backend
[00:50] <foxbuntu> evaryont_, short answer, you can't
[00:50] <foxbuntu> evaryont_, let it remove that and then reinstall it after you get your new version of lirc on
[00:51] <ericrost> I do believe that did the trick
[00:51] <evaryont_> foxbuntu: hrm, but that removes the mythbuntu stuff :/
[00:51] <ericrost> hmm.. or not
[00:51] <foxbuntu> evaryont_, yes, you will have to reinstall it after you put lirc back
[00:52] <evaryont_> great...
[00:52] <foxbuntu> evaryont_, don't fret, I have done it that way a number of times
[00:52] <foxbuntu> no harm in it
[00:52] <evaryont_> alright
[00:52] <ericrost> ok, the backend comes up at least
[00:53] <foxbuntu> and really you only need to do this to get it all: sudo apt-get install mythbuntu-control-centre mythbuntu-desktop
[00:53] <foxbuntu> that will pull in everything via their depends
[01:01] <evaryont_> gah
[01:02] <evaryont_> dmesg: lirc_pvr150: disagrees about version of symbol ivtv_reset_ir_gpio
[01:02] <evaryont_> yet there is nothing relating to that in the code T_T
[01:37] <evaryont_> alright, screw that - I'm going to use seperate dedicated ir blasters/remotes for my set up.
[01:39] <evaryont_> I already had a Snapstream Firefly remote, so I'm using that for a remote
[01:39] <evaryont_> Anyone know of a good (and easy to setup) IR blaster? One that is available in US markets?
[01:42] <foxbuntu> evaryont_, commandir
[01:45] <evaryont_> thanks
[01:46] <Claud-SLC> evaront_, how well does the Firefly remote work?
[01:46] <Claud-SLC> did you have to do much to get it to work?
[01:47] <evaryont_> well
[01:47] <evaryont_> I haven't tried it w/ Mythbuntu
[01:47] <evaryont_> but every where I tried I had to manually configure lirc
[01:47] <evaryont_> but the configs were available online
[01:48] <evaryont_> so not much work
[02:18] <NineTeen67Comet> Hello all; does anyone know where the wireless device installer needs the driver file? openwrt's site isn't finishing the download, but I've got the file here (from an earlier attempt) .. can I just drop it in the desired directory? (where ever that might be)
[02:41] <MythbuntuGuest09> Hi, I have Mythbuntu 8.10 and use channel lineup from schedulesdirect.org.  Sometimes, my tv guide data goes bad and programming info shows up in the wrong channels.  Not sure if this is an issue with schedulesdirect or Mythtv.  Please help
[02:52] <foxbuntu> MythbuntuGuest09, sounds like it could be a database issue
[02:53] <foxbuntu> you might want to just do a clean refresh of the data to ensure it is populated correctly: mythfilldatabase --refresh-all
[03:13] <ipstatic> Hello all
[03:13] <ipstatic> anyone here using the ASUS P5N7A-VM motherboard in their system?
[03:14] <ipstatic> or any GeForce 9300 or Intel G45 motherboards for that matter?
[05:47] <diaruemnus> is anyone willing to help me with a MythTV/PVR-150 related issue?
[06:49] <pretender> cant browse to localhost on fresh install of  ubuntu 8.10 and mythbuntu.  trying to access mytharchive
[07:22] <pretender_> when i go to localhost in firefox it just says "it works" cant see mytharchive or phpmyadmin.  fresh install of ubuntu 8.10 and mythbuntu
[07:23] <hads> mytharchive is a frontend plugin
[07:24] <foxbuntu> pretender_, thats because phpmyadmin is @ http://localhost/phpmyadmin
[07:25] <foxbuntu> mytharchive is something you run from inside mythTV (thus hads statement about frontend plugin)
[07:26] <foxbuntu> hads, see now I am avoiding doing work by helping here too
[07:26] <hads> Vauge non-questions get vauge answers :)
[07:26] <foxbuntu> hads, I know i know
[07:26] <foxbuntu> lol
[07:27] <foxbuntu> hads, you could avoid your work and do mine ;)
[07:27] <foxbuntu> Im only writing an inventory control system...no big deal
[07:28] <hads> I'm watching some TV at the moment, it's 2030 Sunday
[07:28] <hads> I've been meaning to write one of those.
[07:29] <pretender_> http://localhost/phpmyadmin works i mean mythweb when i goto localhost its not there
[07:29] <foxbuntu> pretender_, mythweb is the same as phpmyadmin
[07:30] <foxbuntu> http://localhost/mythweb
[07:30] <foxbuntu> hads, yeah, me too for a long time and now it has to get done or I cannn't move to the next stage on another project
[07:31] <hads> All the ERP software I've seen is far to complicated
[07:31] <pretender_>  http://localhost/mythweb works but before i re installed when i went to localhost phpmyadmin and mythweb had links there but not now why is that
[07:31] <foxbuntu> you put them there?
[07:31] <foxbuntu> thats not by default
[07:34] <pretender_> gtg thanks for getting me through my blond moment
[12:10] <Balachmar> Hi, my mythbuntu box drops to initramfs 'cause it cannot find the disk by uuid. However when I want to check if the uuid exists in /dev/disk-by-uuid the whole directory is absent! How should I go about fixing this?
[16:37] <evaryont_> back again :)
[16:38] <evaryont_> anyone know of any tips to reduce noise in the captured TV?
[16:38] <evaryont_> using the PVR-150 (shipped with the HVR-1600) the very top ~3 pixels are white & snowish
[16:39] <evaryont_> the rest of the image is just fine
[17:59] <pandy> hi has any one posted about the uk.weeklybuilds.mythbuntu.org site has been down for a number of days?
[18:00] <laga> Daviey: ^^
[18:00] <laga> Daviey: fix the mirrors please :)
[18:00] <laga> pandy: if you remove the "uk.", it should use the US mirror and work fine
[18:01] <pandy> the us mirror is not accesable from my connect for some reason.
[18:01] <pandy> This has been the case for some time.
[18:02] <pandy> okay will try that.
[18:05] <laga> evaryont_: configure overscan/zoom or use the crop filter
[18:45] <Daviey> wilco
[19:41] <LEsinnlos> weiß wer wie man eine sat anlage einrichtet ?
[19:45] <tafkaz_73> hi everybody. i just updated to the newest intrepid kernel 2.6.27-10-generic
[19:45] <tafkaz_73> and now on every boot it says it cant dkms lirc
[19:45] <tafkaz_73> lirc was updated to 0.8.4a too in the same occasion
[19:45] <tafkaz_73> funny enough, lirc still works great
[19:46] <tafkaz_73> but booting takes longer now of course
[19:46] <tafkaz_73> when i try to do it manually i get:
[19:46] <tafkaz_73> dkms build -m lirc -v 0.8.4a -k 2.6.27-10-generic -a i686 --no-clean-kernel >>/var/log/dkms_autoinstaller
[19:46] <tafkaz_73> cp: Aufruf von stat für „./../lirc_dev/Module*.symvers“ nicht möglich: No such file or directory
[19:46] <tafkaz_73> make[2]: [lirc_dev.o] Fehler 1 (ignoriert)
[19:48] <tafkaz_73> as a starter...you can see everything here
[19:48] <tafkaz_73> http://pastebin.com/m1285d93a
[19:48] <tafkaz_73> sorry it's german, but i guess you get the point
[19:48] <tafkaz_73> seems like lirc_pvr150.c is nt ok
[19:48] <tafkaz_73> any ideas ?
[20:07] <Cloudchaser_> hello ...i'm a brand new mythbuntu wannabe and.. i am running into some troubles setting it up. I have an Happaugue hvr-1950, and i'm not sure which capture card to use. I've tried 2 of them, vl4 and mpeg-2, but both failed to open when probed
[20:08] <Cloudchaser_> i am not quite sure what to do next.. i googled and read that it was a card that worked with myth
[20:10] <Cloudchaser_> oh and i am installing mythbuntu 8.10 ;)
[20:19] <Cloudchaser_> hello
[20:24] <tafkaz_73> sorry, but i think i cant help you there
[20:24] <Cloudchaser_> thank you.. i read a post from septemper saying its a kernel issue
[20:24] <Cloudchaser_> but i don't know if it was fixed with the 8.10
[20:25] <Cloudchaser_> i'm still on the installation so i don't know if i should continue or just bag it
[20:26] <tafkaz_73> http://ubuntuforums.org/showthread.php?t=666150&highlight=hvr-1800
[20:27] <tafkaz_73> after you installed mythbuntu be sure to aptitude dist-upgrade
[20:27] <tafkaz_73> so the newest kernel updates are included
[20:27] <Cloudchaser_> ok so i don't configure it from the installer then? or i do and then upgrade?
[20:28] <Cloudchaser_> can i use the 1800 info on the 1950?
[20:28] <tafkaz_73> The HVR-1800 works with the latest v4l-dvb drivers
[20:28] <tafkaz_73> oh...
[20:28] <tafkaz_73> ups....
[20:28] <tafkaz_73> upssss....
[20:28] <Cloudchaser_> hehe it might work.. i just don't know
[20:28] <tafkaz_73> sorry
[20:29] <Cloudchaser_> i will do the upgrade though and see what happens
[20:29] <Cloudchaser_> but i just downloaded mythbuntu 8.10 today so i thought it would be the newest
[20:30] <tafkaz_73> welll could be some updates in the repos
[20:30] <tafkaz_73> i had a kernel update just today
[20:31] <tafkaz_73> maybe you should look up the repos you are updating from too
[20:31] <Cloudchaser_> i havent even gotten there  yet
[20:31] <Cloudchaser_> i'm still on the configuring step
[20:31] <tafkaz_73> of course not, but i meant before updating you shoul see through the repos you want to use
[20:32] <Cloudchaser_> i sure hope they are already setup, as I have no idea which ones to use for mythbuntu.. if not i'll google for more info
[20:32] <tafkaz_73> maybe backports could have some newer kernel or something
[20:32] <Cloudchaser_> from the little info i found, 8.10 should have a new enough kernel
[20:32] <tafkaz_73> but i am not sure. i am no expert really
[20:33] <tafkaz_73> then its worth a try
[20:33] <Cloudchaser_> me either
[20:33] <Cloudchaser_> yah
[20:33] <tafkaz_73>  but if, like you say, its a kernel bug, then updating could fix it
[20:37] <Cloudchaser_> its rebooting after installation now.. no idea if its set up right but i doubt it
[20:37] <tafkaz_73> hehe
[20:38] <Cloudchaser_> i need mythbunto for dummies book
[20:38] <tafkaz_73> its actually very easy to set up
[20:38] <tafkaz_73> but if your card doesnt work for whatever reason
[20:38] <Cloudchaser_> probably if i know what the settings should be
[20:39] <tafkaz_73> no idea
[20:39] <tafkaz_73> but if it doesnt work now, then try to aptitude update
[20:39] <tafkaz_73> aptitude dist-upgrade
[20:43] <Cloudchaser_> ok will do that
[20:52] <Cloudchaser_> all updated
[21:05] <Cloudchaser_> well dist-upgrade didn't help with my card not working
[22:10] <MythbuntuGuest31> hello
[22:10] <MythbuntuGuest31> anybody to help me with a tv card????
[22:11] <MythbuntuGuest31> i only want t find a model that works
[22:58] <iapitus> does anyone have mceusb2 remote working with 8.10 or 8.04?