[00:00] <mib_1s4zr0> help me
[00:00] <shenron> does anybody know the answer to my question?
[00:00] <Jack_Sparrow> dreamy_, Just make sure that Xorg-driver-FGLRX       did not somehow get installed
[00:00] <Jack_Sparrow> !helpme
[00:00] <dochaven> Does anyone know what I should use as an irc console client for google talk?
[00:00] <dreamy_> Jack_Sparrow: it wasnt supposed to be here ?
[00:00] <mib_1s4zr0> Jack_Sparrow: can help me
[00:01] <Jack_Sparrow> dreamy_, It should not be if your ati is lower than 9550
[00:01] <obf213> hmm all of a sudden sftp doesn't work
[00:01] <mib_1s4zr0> Jack_Sparrow:  'E:Read error - read (5 Input/output error), E:The package lists or status file could not be parsed or opened.'
[00:01] <mib_1s4zr0> what this mean
[00:01] <rww> dochaven: you can use bitlbee with irssi
[00:02] <goffio> shenron, what's your problem?
[00:02] <lifenova> mib_1s4zr0: you need to be more specific... what are you trying to do?
[00:02] <obf213> work with nautilus? anyone else having this problem, it just says timed out?
[00:02] <Jack_Sparrow> mib_1s4zr0, Ask your question and wait for an answer. Please do not direct it to me. or others will think I am already helping ou and they wont answer
[00:02] <rww> shenron: ask in #ubuntu-motu
[00:02] <dochaven> rww: is it hard to pull off, because I'm trying to use google talk over ssh
[00:02] <shenron> rww: thanks
[00:02] <mib_1s4zr0> Jack_Sparrow: ok jack
[00:03] <_oax> Is there a good way to debug dbus / hal problems?  I am getting an error messge "failed to initialize HAL" and it is not showing up in /var/log anywhere
[00:03] <rww> dochaven: Install instructions: https://help.ubuntu.com/community/Bitlbee
[00:03] <dochaven> rww: thanks
[00:03] <_damus_> HAPPY JAMES EARL RAY APRECIATION DAY EVERY ONE!!!!!!
[00:03] <dreamy_> Jack_Sparrow: your suggesting that its my standard open source driver working at the moment..
[00:03] <Jack_Sparrow> _damus_, Please dont
[00:03] <_damus_> lol
[00:03] <_damus_> ok
[00:04] <PoPpiLLs> not funny
[00:04] <Jack_Sparrow> dreamy_, I am saying that the fglrx is not for  your video card
[00:04] <dochaven> rww: you have no idea how much this helps me (^^,)
[00:04] <mib_1s4zr0> lifenova:  add program into my ubuntu.. then i got this msg This is a major failure of your software management system. Please check for broken packages with synaptic, check the file permissions and correctness of the file '/etc/apt/sources.list' and reload the software information with: 'sudo apt-get update' and 'sudo apt-get install -f'.
[00:04] <goffio> i'm (loop)mounting a file in another partition in /var/spool/squid, but when i ls -l /var/spool i see that it has me:mygroup ownership (was squid:squid)...how can i possibly avoid  this?
[00:04] <_oax> is there a good place to even read about dbus/hal and related developemtn or diagnostic tools?
[00:04] <dreamy_> Jack_Sparrow: i dont have nothhing to execute in the terminal by typing fglrx
[00:05] <rww> dochaven: oh, I do. I do the exact same thing as you want to; bitlbee + irssi is a life saver :)
[00:05] <_oax> like something that will sniff dbus traffic
[00:05] <dreamy_> but i think i had before
[00:05] <rdz> hi all. i would like to 'mkfs.ext3 /dev/sdb1', but i keep getting: /dev/sdb1 is apparently in use by the system; will not make a filesystem here! i pretty sure, that it is not mounted.. any ideas?
[00:05] <lifenova> mib_1s4zr0: type 'sudo gedit /etc/apt/sources.list' in a terminal, then copy the contents of that file into the pastebin, and provide me with a link? (http://paste.ubuntu.com)
[00:05] <D-Spair> Evenin' all. Got a question about dbus-send. Is there a way that a CRON job running as root can send a notification such that it will appear in the GUI users' system tray?
[00:05] <rww> !gksudo | lifenova
[00:06] <lifenova> rww: oops.
[00:06] <Jack_Sparrow> dreamy_, From cli / terminal type: fglrxinfo ...	It should show: The program 'fglrxinfo' is currently not installed.
[00:06] <lifenova> mib_1s4zr0: make that 'gksudo gedit /etc/apt/sources.list'
[00:06] <unna> about one week ago I've used rsync to back up files with options "rsync -rlpEAXgoDtv"... When using the same options again, will this delta algorithm be applied automatically so that only differences in files will be transfered?
[00:06] <n8tuser> rdz -> try  fuser -km /dev/sdb1  to kill processes attached to it
[00:06] <_oax> rdz: you ran mount ot make sure it wasn't mounted?
[00:07] <_oax> rdz: I also had that problem when a partition was considered prt of a raid array.  i had been playing with it a few months before and forgot i used it for that
[00:07] <TBotNik> Anyone here know how to get a submittal/project into SourceForge?  I have 4 projects defined, but SSH keys constantly blow, regardless of what I do, and I can not config Putty or WinSCP to get into the projects.
[00:07] <rdz> n8tuser, even after doing that i get the same error
[00:07] <dreamy_> Jack_Sparrow: strange thing.. i got no fglrxinfo  ( i had it before)
[00:07] <rdz> _oax, there is nothing in /etc/fstab or in /proc/mounts
[00:08] <mib_1s4zr0> lifenova: ok
[00:08] <_oax> rdz - yeah but just /bin/mount | grep sdb1
[00:08] <rdz> _oax, no output
[00:08] <Samosurfer> I need help with an ALSA bug that fuses together the controls on the record tab with those on the playback tab. Thus...record mic up....playback mic up!.
[00:09] <n8tuser> rdz -> have you rebooted ?
[00:09] <mib_1s4zr0> lifenova: one more thing.. i cant use xchat gnome irc chat to login into ubuntu server.. they said i'm using open proxy
[00:09] <_oax> rdz - hmm I do not know how mkfs.ext3 determines that a partition may be in use.  you could try strace-ing it to see what system calls it is doing before it gives that error
[00:09] <rdz> _oax, here the problem was: i had lvm2 setup to span to have one partition spannig two disks. one of them died. since then i am trying to get a similar setup again, but i fail at this early stage
[00:09] <ari_stress>  good morning all :)
[00:09] <rdz> n8tuser, several times yet
[00:10] <goffio> i'm (loop)mounting a file in another partition in /var/spool/squid, but when i ls -l /var/spool i see that it has me:mygroup ownership (was squid:squid)...how can i possibly avoid  this?
[00:10] <_oax> rdz: hmmm.  use the lvm2 toosl to make sure that sdb1 is not a physical volume that is considered part of any logical volume or volume group
[00:11] <dean`> I can't suspend
[00:11] <dean`> dean@dean-laptop:~$clear
[00:11] <dean`> dean@dean-laptop:~$ uname -a
[00:11] <dean`> Linux dean-laptop 2.6.28-4-generic #11-Ubuntu SMP Fri Jan 16 21:57:57 UTC 2009 i686 GNU/Linux
[00:11] <dean`> dean@dean-laptop:sudo lspci | pastebinit -i -
[00:11] <dean`> [sudo] password for dean:
[00:11] <dean`> http://pastebin.com/f7c5ca76c
[00:11] <FloodBot1> dean`: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[00:11] <DasEi> ﻿goffio:chown it or see man chmod
[00:11] <mib_1s4zr0> lifenova: the source list is empty
[00:11] <rdz> _oax, i removed all lvm2 related stuff, also the config files, then i rebooted so that i can be sure, no lvm2 does something nasty... and still. i cannot touch /dev/sdb1
[00:12] <dreamy_> Jack_Sparrow: im sorry about the last line.. i was re reading your sentence
[00:12] <dreamy_> sorry
[00:12] <mib_1s4zr0> E: The package lists or status file could not be parsed or opened.
[00:12] <lifenova> mib_1s4zr0: what version are you using
[00:12] <mib_1s4zr0> why this happen
[00:12] <dean`> mib_1s4zr0: pastebin your /etc/apt/sources.list
[00:12] <rww> mib_1s4zr0: Regarding the open proxy thing: ask in #freenode if it's a freenode server message, or in #ubuntu-ops if you're kicked to another channel when you try to join #ubuntu.
[00:12] <_oax> rdz - try "pvdisplay" to make sure it doesn't show up
[00:12] <mib_1s4zr0> lifenova: XChat-GNOME 0.24.1
[00:13] <ogre> what do i type to find out what version of ubuntu im running?
[00:13] <goffio> DasEi: it is already owned by squid, but when i do the mount it changes ownership
[00:13] <rww> !version | ogre
[00:13] <dreamy_> fglrx is supposed not to be the then.. :S (got no tag..)  er.. named fglrxinfo
[00:13] <rdz> _oax, no output from that either
[00:13] <shear> hmm, is the emerald-themes package deprecated? I try to install emerald and emerald themes, i now have emerald, but zero themes
[00:13] <lifenova> mib_1s4zr0: no, I mean version of ubuntu
[00:14] <mib_1s4zr0> lifenova: intrepid ibex
[00:14] <_oax> rdz - really weird.  when I had that problem, i used mdadm to tell the system that the partition was not part of a raid, but it sounds like you never messed with that.  at this point, I would strace mkfs.ext3
[00:14] <rdz> _oax, even after using fdisk to completely format the drive and setting up a new partition table, i cannot touch /dev/sdb1... i am really clueless here
[00:14] <goffio> nevermind, chowned *after* mount did it, thanx!
[00:15] <rdz> _oax, i never touch raid
[00:15] <chu_> Hey, can I "upgrade" Ubuntu via Synaptic?
[00:15] <DasEi> ﻿ goffio:gottto change the dir you moun to
[00:15] <lifenova> mib_1s4zr0: copy and paste the following into your /etc/apt/sources.list file
[00:15] <rdz> _oax, but thanks a lot for all your suggestions
[00:15] <lifenova> mib_1s4zr0: http://paste.ubuntu.com/107144/
[00:15] <_oax> sorry I'll ask one more time, does anyone know of a dbus developer / troubleshooting guide?  I am getting a dbus / hal error message when i log in and my usb storage devices are not mounting.  I don't know how to track this down
[00:15] <lifenova> !upgrade | chu_
[00:15] <rdz> _oax, i am afraid, that i don't know to read the output of strace
[00:15] <_oax> rdz: if you can paste it somewhere I'll take a look
[00:15] <lifenova> mib_1s4zr0: once you save the file with the new contents, it should work :)
[00:16] <_oax> rdz - it should really just be in the last few lines before the error is displayed
[00:16] <mib_1s4zr0> lifenova: what is it mean.. i'm new user..
[00:17] <TBotNik> All: REPEATING Anyone here know how to get a submittal/project into SourceForge?  I have 4 projects defined, but SSH keys constantly blow, regardless of what I do, and I can not config Putty or WinSCP to get into the projects.
[00:18] <lifenova> mib_1s4zr0: highlight the contents of the brown box (except the line numbers and the 'Download as text' part, then press ctrl+c, then run 'gksudo /etc/apt/sources.list' in a terminal, then press ctrl+v and save the file
[00:18] <rww> !ot | TBotNik
[00:18] <mib_1s4zr0> unmet dependencies = what is it mean
[00:19] <lifenova> mib_1s4zr0: if the file you opened earlier with the command I told you was empty, it means your system doesn't know which repositories to use- where to get the software from, that is
[00:19] <chu_> Awesome, thanks for the help.
[00:19] <_oax> Asking: does anyone know what is the service in gnome that detects and mounts usb storage devices?   it is not working for me and I would like to track this problem down
[00:19] <nightrid3r> !firefox
[00:20] <mib_1s4zr0> lifenova: so must i set the source back?
[00:20] <lifenova> mib_1s4zr0: yeah. What I gave you the link to was the default repository... if you copy and paste that into the file I had you open earlier, it should set it back to default
[00:21] <rdz> _oax, http://www.pastebin.ca/1312903
[00:21] <zamba> how do i remove the private directory?
[00:22] <dmsuperman> When I use acpi then my wireless driver doesn't work. I have the Acer Ascpire 4530 which has an Atheros wifi chipset
[00:22] <mib_1s4zr0> lifenova: so i must type "sudo apt-get update" then copy the list into "source list"?
[00:22] <Stargazer> How do i rip a movie to an AVI file ?
[00:22] <lifenova> mib_1s4zr0: no. type 'gksudo gedit /etc/apt/sources.list'
[00:22] <lifenova> and then copy the list into that file, then save it
[00:22] <mib_1s4zr0> ok
[00:23] <bazhang> Stargazer, number of methods, handbrake is a preferred one here
[00:23] <_oax> rdz: open("/dev/sdb1", O_RDONLY|O_EXCL)      = -1 EBUSY (Device or resource busy)
[00:23] <CyL> how do I set up dictionaries in ubuntu?
[00:23] <_oax> rdz: not the most helpful
[00:24] <Stargazer> Bazhang, what repo is that ?
[00:24] <mib_1s4zr0> lifenova: still got empty list
[00:24] <bazhang> Stargazer, a ppa from jdong
[00:24] <_oax> rdz: and the manpage for open() doesn't say what O_EXCL is supposed to mean here.  in fact it says that behavior is undefined what O_CREAT is not used with it
[00:24] <Stargazer> Bazhang... link ?
[00:24] <bazhang> Stargazer, hang on a sec
[00:24] <dmsuperman> When I use acpi then my wireless driver doesn't work. I have the Acer Ascpire 4530 which has an Atheros wifi chipset
[00:24] <dochaven> rww: YOU ARE AWESOME!!
[00:24] <_oax> rdz: so that's weird.  anyhow, it's the kernel tells you that the device is in use.  mkfs.ext3 isn't making that determination by itself
[00:25] <lifenova> mib_1s4zr0: Yes, you're supposed to copy and paste this (http://paste.ubuntu.com/107144/) into that empty file that you have, and save it
[00:25] <dochaven> (^^,)
[00:25] <rdz> _oax, i see.. thanks for helping
[00:25] <CyL> any clue on how to dictionaries up on ubuntu?
[00:25] <rdz> _oax, however, what could the kernel make believe, that the device is in use?
[00:25] <bazhang> https://launchpad.net/~handbrake-ubuntu/+archive Stargazer you know how to add repos?
[00:25] <dreamy_> Jack_Sparrow: ive concluded that i dont have  xorg driver fglrx installed   : he program 'aticonfig' is currently not installed.  You can install it by typing:
[00:25] <dreamy_> apt-get install xorg-driver-fglrx
[00:25] <dreamy_> :
[00:25] <lifenova> CyL: Applications -> Office -> Dictionary... if you hit edit and then prefs, I believe there is an option to add dictionaries
[00:26] <_oax> rdz: hmm trying to figure out how to see who else has it open that the kernel would know about
[00:26] <felixsulla> How do you save your settings in Ubuntu so they are permanent? When I restart it resets everything?
[00:26] <bazhang> felixsulla, using the livecd?
[00:26] <CyL> lifenova: thanks, but i was refering to system wide dictionary
[00:26] <lifenova> felixsulla: Are you using the LiveCD?
[00:26] <rdz> _oax, on #lvm someone suggested removing modules. the thing is, that i don't have a clue which modules to be removed
[00:26] <lifenova> CyL: ah, ok
[00:26] <felixsulla> It's a guest OS on Virtualbox. Gutsy Gibbon
[00:27] <_oax> rdz: try fuser -m /dev/sdb1
[00:27] <bazhang> felixsulla, which is the guest and what is the host
[00:27] <mib_1s4zr0> lifenova: ok i've copy that then paste into my source list
[00:27] <rdz> _oax, the same thing goes for the entire drive: i tried creating several partitions, but icannot make a fs on all of those
[00:27] <_oax> rdz: hmm fuser -m /dev/sdb
[00:27] <felixsulla> Ubuntu is the guest, Vista is the host
[00:27] <mib_1s4zr0> lifenova: i hope this solve my problem
[00:27] <lifenova> mib_1s4zr0: I do too :P
[00:27] <rdz> _oax, i tried. but it doesn't give any output and after that it is still the same
[00:28] <dmsuperman> When I use acpi then my wireless driver doesn't work. I have the Acer Ascpire 4530 which has an Atheros wifi chipset
[00:28] <bazhang> felixsulla, you are installing into the vm or just test-driving ubuntu in the vm
[00:28] <ned> so i ran dist-upgrade but lsb_release is still telling me im on gusty when i want to be on intrepid
[00:28] <felixsulla> I thought it was a full installation, .. is there a way to verify for sure?
[00:28] <marcos_> Jack_sparrow  i thought id let you know, i fixed my problem with grub by using a liv cd, backing up important files of course, and then fixing the grub through command window
[00:28] <mib_1s4zr0> lifenova: waaa... still cant solve.. should i restart my machine?
[00:28] <bazhang> ned, you first need to go to hardy
[00:28] <lifenova> mib_1s4zr0: type sudo apt-get install -f
[00:28] <Jack_Sparrow> marcos_, Glad you got it handled
[00:28] <ned> bazhang, dist-upgrade -t hardy ?
[00:29] <lifenova> mib_1s4zr0: sudo apt-get -f install*
[00:29] <bazhang> !upgrade | ned
[00:29] <marcos_> yep, thank you though
[00:29] <lifenova> mib_1s4zr0: with no asterix
[00:29] <bazhang> ned read that link
[00:29] <ObiXidO> i finally got my wireless to connect, but now it keeps disconnecting on its own, and then connecting again, is there a fix for this problem?
[00:29] <mib_1s4zr0> lifenova: E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
[00:30] <n8tuser> ObiXidO -> which channel are you using?
[00:30] <bazhang> felixsulla, if the os starts up with the iso file loaded or the ubuntu cd inserted then it is an install, I suspect you never disabled one or the other
[00:30] <_oax> rdz: does dmsetup info give anything interesting?
[00:30] <ObiXidO> what do you mean?
[00:30] <bazhang> felixsulla, err without
[00:30] <leo> Hi could someone tell me if I am typing in a foreign language please...
[00:30] <rdz> _oax, this is really a blocker, since it prevents me since two days to fix my server.... i would do it from a livecd if i would know how that works... there at least i can create a filesystem
[00:30] <lifenova> mib_1s4zr0: do you have any other programs open that are accessing that folder?
[00:31] <bazhang> leo, what is your real question
[00:31] <n8tuser> ObiXidO -> which channel is your AP operating at? 1 to 11 ?
[00:31] <mib_1s4zr0> lifenova: which folder?
[00:31] <lifenova> mib_1s4zr0: /var/lib/dpkg/
[00:31] <felixsulla> So, to make it a full install I'd want to disable the loading from ISO?
[00:31] <lifenova> mib_1s4zr0: make sure you've closed the gedit window that you had your /etc/apt/sources.list file open in
[00:31] <leo> * hours in the forums today and no one can tell me if there is a program that will translate some files into english for me....
[00:31] <_oax> rdz: yeah sorry i feel your pain.  I'm actually in here asking a question myself, I'm not an ubuntu support volunteer myself.  someone else might be able to help better
[00:32] <bazhang> felixsulla, after it is installed yes; change it to boot from 'hard drive' instead of iso
[00:32] <bazhang> felixsulla, though obviously hard drive is a virtual one
[00:32] <Jack_Sparrow> leo, Tons of web pages can do it.
[00:32] <rdz> _oax, sorry. i wasn't complaining.. i am very grateful, that you were trying to help
[00:32] <mib_1s4zr0> lifenova: yes i've close all terminal and source list.. but got this msg E: Read error - read (5 Input/output error) E: The package lists or status file could not be parsed or opened.
[00:32] <_oax> rdz: but my approach would be to find out what makes the kernel think that a device is "in use" not allow it to be opened exclusively (i.e., with "O_EXCL")
[00:32] <bazhang> leo,  google translate
[00:33] <rdz> _oax, it's just that i am very surprised by this kind of problem..
[00:33] <leo> ok I will try that....
[00:33] <lifenova> mib_1s4zr0: can you post the exact contents of your /etc/apt/sources.list file on paste.ubuntu.com
[00:33] <_oax> rdz: the kernel must keep a map of devices that are in use and who is using them.  the trick is getting that info out of the kernel.  fuser looked like the right approach, but it seems to apply to userland only.  "dmsetup" seems promising, did you try dmsetup info ?
[00:34] <rdz> _oax, i am still reading the man page
[00:34] <stricjux_> yello
[00:34] <majnoon> !ot
[00:34] <ObiXidO> i have no idea
[00:34] <ObiXidO> how would i check that?
[00:34] <felixsulla> bazhang and I probably have to configure that setting with the VM sht down?
[00:34] <ObiXidO> i have no idea, how would i check that?
[00:34] <mib_1s4zr0> lifenova:  the exact content before this is empty but then i paste it with the source list that u give me
[00:34] <bazhang> felixsulla, yep
[00:34] <leo> now back to my original question? Is there a PROGRAM that will do it for me...I am not pissed I am just trying to find out if there is a program I can download to do it...
[00:34] <felixsulla> Argh. I just got DHCP working :)
[00:34] <rdz> _oax, State:             ACTIVE
[00:35] <lifenova> mib_1s4zr0: post the contents again, I want to be sure you didn't paste anything else in by accident
[00:35] <rdz> _oax, does that mean it is busy?
[00:35] <mib_1s4zr0> ok
[00:35] <n8tuser> rdz when you do a fdisk -l   does it shows up?  what is the type? 8e ?
[00:35] <stricjux_> I'm having problems using django-multilingual... I've checked out the svn to /var/usr/python2.5/site-packages/ but "python manage.py runserver" fails with "no module named multilingual
[00:35] <Gh0sty> !bug 319040
[00:35] <Gh0sty> hm no bot here? :p
[00:35] <Gh0sty> https://bugs.launchpad.net/ubuntu/+source/yakuake/+bug/319040
[00:35] <exodus_ms> leo: what language(s) are you translating?
[00:36] <jblp> .
[00:36] <dmsuperman> When I use acpi then my wireless driver doesn't work. I have the Acer Ascpire 4530 which has an Atheros AR9280 wifi chipset
[00:36] <leo> French and german to english...
[00:36] <rdz> n8tuser, now it shows 83, for testing reasons i set it to linux in order to try mkfs.ext3 afterwards
[00:36] <n8tuser> rdz -> to make an lvm i believe it has to be 8e
[00:36] <rdz> n8tuser, but yeah, using fdisk works fine.. i can wipe and recreate the partition table and still have the same proble afterwards
[00:36] <mib_1s4zr0> lifenova: i've paste.. i gonna go to eat now
[00:36] <stricjux_> anyone?
[00:37] <mib_1s4zr0> thanks
[00:37] <lifenova> mib_1s4zr0: post the link...
[00:37] <rdz> n8tuser, that is absolutely correct... the endresult should be 8e and a running lvm
[00:37] <simplenewb> Is there any way to get like a diff to show every package you've added to a default ubuntu install? Say for instance I wanted to remove every last package that didn't come with ubuntu, how could I go about that?
[00:37] <stricjux_> could anyone tell me how can I verify if a site-package got installed properly?
[00:37] <owen1> is there text-based audio player that shows list of songs in folder and can play all of them?
[00:37] <n8tuser> rdz -> dont you have to specify the type first before making a FS on it?
[00:38] <rdz> n8tuser, yeah, yet i tried mkfs.ext3, not pvcreate
[00:38] <rdz> n8tuser, that is why i set it to 83
[00:38] <rdz> n8tuser, however, neither works
[00:38] <n8tuser> rdz -> no no, i meant with fdisk or sfdisk  you have to set to 8e and write then you can make the fs afterwards
[00:39] <dreamy_> im going to test danger deep with xorg driver fglrx
[00:39] <jrib> owen1: moc, cmus, a frontend to mpd?
[00:39] <_oax> rdz: did dmsetup tell you that it was "ACTIVE"?  sorry I was away and missed what you said before that
[00:39] <rdz> n8tuser, ah.. i understand what you mean: the initial problem was to create a lvm, but as it failed, i went for simple ext3 and that failed as well. that is the reason for the current state.. the end goal would still be lvm, setting it up the way you mentioned
[00:40] <dreamy_> brb
[00:40] <exodus_m1> leo: do you mean something like this --> http://logos-os.dfki.de/
[00:40] <rdz> _oax, yeah.. STATE: ACTIVE
[00:40] <felixsulla> Any idea where in virtualbox I'd change to the hard drive instead of the ISO
[00:41] <n8tuser> rdz looking at my notes, its seems the sequence is  fdisk or sfdisk ; select the type 8e; write; then pvcreate; vgcreate; lvcreate adn then finally mkfs.ext3 /dev/mapper/vgName
[00:41] <leo> I Have tree program files in French and one in German I want to tranlate them so I can read them
[00:41] <exodus_ms> leo: did you get that link?
[00:41] <rdz> n8tuser, that is absolutely correct, when wanting to setup lvm...
[00:42] <rdz> n8tuser, right now it fails at pvcreate time
[00:42] <leo> I know there is alot of places that will do it... I am wondering if Ubuntu has a program that will do it...
[00:42] <leo> Yes i got it
[00:42] <exodus_ms> leo: dude, I'm trying to help, did you check that link
[00:42] <leo> thanx
[00:42] <Jack_Sparrow> leo, Fire up synaptic and search for a translation program
[00:43] <_oax> rdz: hmm.  does dmsetup give you a way of making something "INACTIVE"  or does it give you any clue as to what is making it active?
[00:43] <leo> exodus_ms I am not mad at you thanx for your help I spent 8 hours in the forums and not one reply i am just a little cranky Thank you for your help....
[00:44] <exodus_ms> leo: did you get the msg from Jack_Sparrow
[00:44] <rdz> n8tuser, after doing the fdisk part, i do: pvcreate /dev/sdb1 and then i get: Can't open /dev/hdb1 exclusively.  Mounted filesystem?
[00:44] <_oax> rdz: you could try rmmod the dm (device mapper) modules, if you don't ahve any lvm2 running
[00:44] <n8tuser> rdz -> i dont know if you can do an  e2fsck to file check your existing lvm  before mounting it? am just wild guessing here now
[00:44] <leo> Thanx Jack I will try that also...
[00:44] <BCampbell> i'm having issues w/Nvidia 177 & 173.  If I want to try 180.22 from the Nvidia website, I need to close X.  To do this -> sudo /etc/init.d/gdm stop?  this should drop to a CLI and then once the install is run, do I restart gdm or reboot first?
[00:44] <exodus_ms> leo: what are the files you are trying to read
[00:44] <rdz> n8tuser, however, i have the same problem when trying to mkfs.ext3 instead of a lvm
[00:44] <leo> cpp file and one other...
[00:44] <rdz> n8tuser, i don't have a running lvm2
[00:45] <rdz> _oax, thanks i'll try
[00:45] <owen1> jrib: let me google for them.
[00:45] <Gh0sty> anyone know how i can change the default media player for movies from totem to gnome-mplayer?
[00:45] <Jack_Sparrow> !find translate
[00:45] <exodus_ms> leo: you have a program written in c++ (in another language) and you want to be able to read it?
[00:45] <Jack_Sparrow> !info gnome-translate
[00:46] <n8tuser> rdz it says its already mounted right even though you have not mounted it correct?
[00:46] <rdz> n8tuser, yeah
[00:46] <leo> Yes I believe you are correct...
[00:46] <_oax> rdz: maybe dmsetup remove /dev/sdb1
[00:46] <n8tuser> rdz -> what does dmesg even tell you about your /dev/sdb?
[00:46] <_oax> or whatever "name" dmsetup is listing your device as
[00:47] <owen1> jrib: http://mp3blaster.sourceforge.net/#screenshots   looks interesting
[00:47] <leo> when you send me a message it appears in red how do I do that?
[00:47] <exodus_ms> !tab | leo
[00:47] <rdz> _oax, n8tuser i got it.. after removing the dm_ modules
[00:47] <rdz> _oax, many many thanks
[00:48] <exodus_ms> leo: no, sorry wrong factoid
[00:48] <rdz> i don't know yet, what those are useful for, but now they block /dev/sdb
[00:48] <n8tuser> rdz -> congrats, it is your persistence that solved it
[00:48] <leo> !exodus_ms like this
[00:48] <exodus_ms> leo: type the nick of the person you want to address followed by TAB
[00:48] <_oax> rdz_ cool but I think you need the dm_ stuff (devicemapper I'm guessing) to make lvm2 work
[00:48] <rdz> n8tuser, man thanks for your patience
[00:48] <leo> exodus_ms, Like this?
[00:49] <exodus_ms> leo: thats it :)
[00:49] <rdz> _oax, special thanks to you for finding the cause of my trouiblees
[00:49] <n8tuser> rdz -> i can only give encouragement :P
[00:49] <_oax> rdz_ also, you could look in /dev/mapper to see what virtual devices devicemapper knows about
[00:49] <leo> exodus_ms Thanx
[00:49] <_oax> rdz: np glad you got it working!   this stuff is frustrating sometimes
[00:49] <Mattsnakes> what version do I download for a 64bit intel processor? I speculate that it is the ubuntu-8.10-desktop-i386.iso.torrent, right?
[00:50] <leo> exodus_ms, Yes it is c++ in another language...
[00:50] <exodus_ms> leo: now, do !gnome-translate like Jack_Sparrow did for you before
[00:50] <rdz> _oax, will talk alter to you.. xchat is hardly respnding while doing mkfs
[00:50] <Sifre> hi where for irc proxy list?
[00:50] <Sifre> ?irc proxy list?
[00:50] <_oax> rdz: it's like every time I have to fight with some problem in linux/debian/ubuntu/whatever, there are 15 new daemons / services / ways of doing things that have popped up since the last time I had to screw with stuff, and I have to learn them all
[00:50] <Jack_Sparrow> rdz`I would not push the limits of your system while formatting a partition
[00:50] <leo> exodus_ms,  ok how to do again?
[00:50] <eseven73> !ot | Sifre
[00:50] <exodus_ms> leo: type   !gnome-translate
[00:51] <grkblood13> is any1 here running wine?
[00:51] <leo> !gnome-translate
[00:51] <Tekno> running... no
[00:51] <Tekno> drinking yes
[00:51] <bazhang> leo, /msg ubottu info gnome-translate
[00:52] <BCampbell> i'm having issues w/Nvidia 177 & 173.  If I want to try 180.22 from the Nvidia website, I need to close X.  To do this -> sudo /etc/init.d/gdm stop?  this should drop to a CLI and then once the install is run, do I restart gdm or reboot first
[00:52] <exodus_ms> !info gnome-translate
[00:52] <Mattsnakes> Which one do I download? for a 64bit Intel Processor?
[00:52] <eseven73> Wine kinda sucks, if you got the ram use VirtualBox instead and then get the Guest addons for it and put it in seamless mode :)
[00:52] <leo> bazhang,  here or in terminal?
[00:52] <bazhang> leo, here
[00:53] <n8tuser> eseven73 -> but that requires XP loaded into your VB
[00:53] <Mattsnakes> I realize that it is a stupid question, but I really need help and I cant find the info anywhere else
[00:53] <bazhang> leo, in terminal is : apt-cache search translate (for example)
[00:53] <eseven73> yeah? n8tuser who doesnt have XP?
[00:53] <bazhang> Mattsnakes, the 64bit one
[00:53] <n8tuser> eseven73 -> me, i dont own one
[00:53] <bazhang> Mattsnakes, even though it is named amd
[00:53] <Mattsnakes> which link on the torrent page??
[00:54] <bazhang> !torrents
[00:54] <nightrid3r> !pastebin
[00:54] <leo> Ok thanx everyone I will go try it...
[00:54] <eseven73> n8tuser: well its not hard to get at anyrate but yeah I guess you got a point ;)
[00:55] <Mattsnakes> http://hr.releases.ubuntu.com/8.10/ubuntu-8.10-desktop-i386.iso.torrent is this the link, then?
[00:55] <linuxman410> Mattsnakes use 64bit amd version it will work
[00:55] <Flynsarmy> In /etc/fstab i had a line: /dev/sda3 /media/F ntfs-3g defaults,locale=en_AU.UTF-8 0 0,uid=1000,umask=0022 but on boot it doesn't mount the hdd properly. Any ideas?
[00:55] <Mattsnakes> the AMD version will work for an Intel processor?
[00:55] <joejc> can i use my remote in ubuntu?
[00:55] <linuxman410> yes
[00:55] <bazhang> Mattsnakes, yep
[00:56] <xtmnx> is there a way to wrap workspaces in workspace switcher using metacity?
[00:56] <bazhang> Mattsnakes, if its core2 duo or better
[00:56] <Mattsnakes> it's a dual core processor, but isn't there an Intel version?
[00:56] <bazhang> Mattsnakes, core duo or core2 duo
[00:56] <n8tuser> Flynsarmy -> what does it mean it does not mount properly? what status you get once booted and type mount?
[00:57] <ic3fr0g> !ubbot BitchX
[00:57] <Flannel> Mattsnakes: "AMD64" is the generic term for 64bit.  just like "i386" is generic for 32bit (yet AMD64 isn't AMD specific, just like i386 isnt intel specific)
[00:57] <bazhang> ic3fr0g, not in the repos
[00:57] <Flannel> ic3fr0g: BitchX has been removed due to lack of support/development and a number of dangerous bugs
[00:57] <Mattsnakes> oh, that's confusing
[00:57] <Flynsarmy> n8tuser, i typed /media/F in run and it came up with a blank folder. i didnt type mount when i booted up so i dont know
[00:57] <bazhang> ic3fr0g, please keep it in channel
[00:57] <Mattsnakes> thanks
[00:58] <whyameye> would there be an easy way to update from 8.04 64 bit to 8.10 32 bit? All I can think of to do is a complete reinstall.
[00:58] <exodus_ms> This is funny, I just found an application named 'leo' that translates german to english --> http://pwet.fr/man/linux/commandes/leo
[00:58] <ic3fr0g> BitchX works on Ubuntu ?
[00:58] <Flynsarmy> n8tuser, since then i removed ,uid=1000,umask=0022 and its not working again
[00:58] <n8tuser> Flynsarmy -> well, can you type mount and see if it is mounted correctly?
[00:58] <ic3fr0g> Flannel: any good client like bitchx ?
[00:58] <Flannel> ic3fr0g: Try irssi
[00:58] <eseven73> ic3fr0g: get irssi its better
[00:58] <bazhang> whyameye, fresh install only
[00:58] <ic3fr0g> Flannel: a download link for irssi
[00:59] <Flynsarmy> n8tuser, may i PM?
[00:59] <bazhang> ic3fr0g, in the repos
[00:59] <exodus_ms> www.irssi.org
[00:59] <captain_> I just installed boxee and now my audio is shot, how can i reinstall audio I guess is what i need?
[00:59] <n8tuser> Flynsarmy -> nope, stay here in main so people can correct me if I give you wrong advise or command
[00:59] <bazhang> exodus_ms, no need for that link
[00:59] <exodus_ms> yeah, but he asked for a dl link
[01:00] <bazhang> exodus_ms, sudo apt-get install package
[01:00] <kjkwlkp> hej
[01:00] <eseven73> !away > JamesMowery|away
[01:00] <exodus_ms> bazhang: understand but he asked for a download link, might want to do something different, heck he might even be running windoze
[01:00] <kjkwlkp> jest tu jakis polak
[01:00] <bazhang> !pl
[01:00] <tozetre> So is this a good spot to ask for ubuntu help, or should I go elsewhere?
[01:00] <Flynsarmy> n8tuser, do i type sudo umount /media/F then sudo mount <that line i pasted earlier> ?
[01:00] <bazhang> exodus_ms, not good advice though
[01:01] <exodus_ms> bazhang: cool
[01:01] <Flannel> exodus_ms: This channel is for Ubuntu support, its assumed you're running Ubuntu
[01:01] <conor> I just got a external harddrive and i want to format and install ubuntu on it? can anyone help me?
[01:01] <kjkwlkp> hej
[01:01] <exodus_ms> "assumed"
[01:01] <n8tuser> Flynsarmy -> yes to unmount it and correct about mounting it
[01:02] <tozetre> I've got a couple of USB thumb drives; Ubuntu recognizes it, shows it in nautilus' list of drives, but it won't open. It appears in lsusb and dmesg ends with "Attached scsi generic sg2 type 0". What am I doing wrong?
[01:02] <mindrape> tozetre - cd /media is it there?
[01:02] <tozetre> mindrape: nope. Do I need to mount it then?
[01:03] <Hellowewewe> need help, what to do i cannot start my Kubuntu "checking battery state"
[01:03] <mindrape> tozetre - sudo fdisk -l
[01:03] <mindrape> tozetre if that shows it as not mounted then yup.
[01:03] <mindrape> tozetre - also do a sudo lshw -C storage     and see if it shows up as possibly mounted in there w a strange mt point.
[01:04] <dmsuperman> I have the Acer Ascpire 4530 which has an Atheros AR9280 wifi chipset. It doesn't list any networks to connect to, and I'm running 8.10 amd64, any ideas?
[01:04] <mindrape> dmsuperman      sudo iwlist wlan0 scan
[01:05] <n8tuser> Flynsarmy -> jsut for kicks  umask=022 on fstab will give you  rwxr-xr-x
[01:05] <dmsuperman> mindrape: No scan results
[01:06] <Flynsarmy> n8tuser, It came up with all this mount usage text when i typed sudo mount /dev/sda3 /media/F ntfs-3g defaults,locale=en_AU.UTF-8 0 0
[01:06] <mindrape> dmsuperman - sudo iwconfig   do you even have any valid wireless extentions?
[01:06] <Flynsarmy> n8tuser, Well i'm trying to share a folder on that ntfs drive so ppl on my (windows) network can view it. i was told i had to mount it this way
[01:06] <mindrape> n8tuser uhmmm.....
[01:06] <leo> Hey You guys still out here?
[01:06] <mindrape> 022 is not rwxr-xr-x
[01:06] <dmsuperman> mindrape: I have wlan0
[01:07] <enovativ> using Xen can you network virtual images
[01:07] <n8tuser> mindrape thats on mount command or rather fstab
[01:07] <mindrape> dmsuperman - is it showing an Access Point and ESSID?
[01:07] <joejc> what do i need to do to get my remote to work in ubuntu?
[01:07] <tozetre> mindrape; I see it in fdisk, but I don't see any indication of it being mounted or not...
[01:07] <dmsuperman> mindrape: Access Point: Not-Associated
[01:07] <n8tuser> Flynsarmy -> does /media/F  exist?
[01:07] <mindrape> dmsuperman - sudo iwconfig wlan0 essid YOURSSIDNAMEHERE
[01:07] <Flynsarmy> n8tuser, yes
[01:07] <enovativ> if i create a ubuntu server image and ubuntu workstation image can i network the two ?
[01:08] <mindrape> enovativ - image?  like two separate servers 1 running server and 1 running workstation?  YES
[01:08] <n8tuser> Flynsarmy -> and you are sure /dev/sda3 is the ntfs partition? is the ntfs-3g module loaded?
[01:08] <dmsuperman> mindrape: It immediately ends with nothing printed to the terminal
[01:08] <mindrape> dmsuperman - type sudo iwconfig now
[01:08] <enovativ> mindrape: so i can have a server, and say two workstations, and network them together
[01:08] <mindrape> and see if it shows you as Associated...
[01:09] <Flynsarmy> n8tuser, i'd say so. it automounted on boot (i used ntfs-config to do it) and its always worked in the past. i'm just trying to add those uid=<whatever> and umask=<whatever>
[01:09] <dmsuperman> mindrape: It shows the ESSID now
[01:09] <n8tuser> mindrape -> so was it wrong? 022 in the fstab is  rwxr-xr-x ?
[01:09] <mindrape> enovativ as long as you have more than 1 computer and they are running a modern OS w a TCP/IP stack... yes... you can.
[01:09] <dmsuperman> mindrape: Should I try and unplug the wired connection?
[01:09] <mindrape> dmsuperman - does it have a hex address after Access Point?
[01:09] <n8tuser> Flynsarmy -> let me look at the man pages
[01:09] <mindrape> onthe 2nd line?
[01:09] <enovativ> mindrape: i cant do it on say my gateway laptop
[01:09] <leo> Thanx to exodus-ms, Jack_Sparrow, and bazhang, I went to the pakager and downloaded a gnome translator and it did exactly what I needed thanx a bunch guys...
[01:09] <dmsuperman> mindrape: Nope, still Not-Associated
[01:10] <mindrape> dmsuperman - then likely your driver for your wireless card ain't workin...
[01:10] <dmsuperman> mindrape: Right, how do I determine next steps in fixing that?
[01:10] <mindrape> dmsuperman - sudo lshw -C network
[01:10] <mindrape> what driver are you presently using?
[01:11] <mindrape> You will likely need to !broadcom
[01:11] <dmsuperman> mindrape: mindrape ath9k
[01:11] <mindrape> !ath9k
[01:11] <mindrape> hrrmm... hold... lemme see something real fast.
[01:11] <dmsuperman> K
[01:11] <exodus_ms> leo: cool man, now stop downloading cpp programs in foreign languages ;-)
[01:11] <tozetre> mindrape: Got it mounted; thanks very much! (heaps karma on you)
[01:11] <mindrape> np
[01:12] <xxCody> Err, I still can't figure out how to make my own Menu in Ubuntu. Can anyone help?
[01:12] <n8tuser> Flynsarmy -> seems okay to me, can you post your  sudo fdisk -l results?
[01:12] <mindrape> dmsuperman - lemme hop on my other boxen... I have a URL for you that will fix it.
[01:12] <mindrape> dont care to google for it on this laptop... :P
[01:12] <redbuntu> hello?
[01:12] <mindrape> actually... lemme hop on that comp entirely.  I'm in Windows VMWare on my ubuntu laptop and mIRC is killing me with its awfulness...
[01:13] <redbuntu> i am new to ubuntu and have english bad
[01:13] <redbuntu> i tried to install nvidia drivers
[01:13] <Flynsarmy> n8tuser, http://pastebin.com/d62ca98b2
[01:13] <redbuntu> quit gdm
[01:13] <exodus_ms> redbuntu: what language do you prefer?
[01:13] <xxCody> IS there an app i can download to have my own menu?
[01:13] <redbuntu> It is a small indian language
[01:14] <redbuntu> you most likely dont know it
[01:14] <exodus_ms> ok
[01:14] <redbuntu> i accidentally shut down badly
[01:14] <syockit> Can I tell the system what to do before mounting root during boot?
[01:14] <redbuntu> ???
[01:14] <redbuntu> i do not understand
[01:14] <captain_> Help, I installed an app, then I got no sound in the whole system so I uninstalled and still no audio?
[01:14] <n8tuser> Flynsarmy -> that looks okay too, i can not figure out from your command why the system would not take it and complains
[01:14] <dmsuperman> redbuntu: What don't you understand?
[01:14] <redbuntu> i quit gdm
[01:15] <redbuntu> mounting root during boot
[01:15] <redbuntu> i have no gdm
[01:15] <redbuntu> and i cannot get gui
[01:15] <redbuntu> what do i do?
[01:15] <mindrape> redbuntu - which gdm        startx
[01:15] <mindrape> no work?
[01:15] <xxCody> How do you install Java on Ubuntu?
[01:15] <n8tuser> syockit -> maybe if you customize your initrd ?
[01:15] <redbuntu> i do not know which gdm
[01:15] <mindrape> xxCody - do you just want a java virtual machine for webbrowsing or do you want a java development kit for programming?
[01:15] <mindrape> which is a command...
[01:16] <mindrape> type it
[01:16] <mindrape> which gdm
[01:16] <dmsuperman> mindrape: I feel you, mIRC blows :P
[01:16] <n8tuser> xxCody -> apt-cache search sun-java   and choose to install the one you like
[01:16] <mindrape> your path might be jacked up
[01:16] <redbuntu> i typed sudo /etc/init.d/gdm stop
[01:16] <redbuntu> and that is it
[01:16] <mindrape> cd /etc/init.d        sudo service gdm start
[01:16] <redbuntu> then sh NBidia
[01:16] <cilkay> xxCody: What kind of menu? And to install Java, apt-get install <thePackageName>, or use one of GUI package managers or aptitude.
[01:16] <redbuntu> ah
[01:16] <redbuntu> i try now
[01:16] <Rudd-O> aaahhh mirc, so many memories
[01:17] <xxCody> Can you recommend one? I dont know what im doing really. And how do i install it?
[01:17] <redbuntu> lol @ mirc
[01:17] <mindrape> I recently got VMWare setup w Windows 3.1, Win98, WinXP, and OpenBSD 4.3 images... I was just in WinXP screwing around and decided to IRC...  :P
[01:17] <mindrape> but yeah, I forgot how bad mIRC was..
[01:17] <n8tuser> xxCody -> what do you need the java for? try the command i suggested earlier first to give you a feel of what is available
[01:17] <mindrape> dmsuperman: did you get my notice w the URL btw?
[01:17] <cilkay> xxCody: I told you above how to install it. You have three ways, apt-get, aptitude, or some GUI like Adept or whatever the Gnome one is called.
[01:17] <xxCody> Yea i did... I see everything.
[01:17] <joejc> how do i use my ir remote in ubuntu?
[01:17] <dmsuperman> mindrape: I didn't :(
[01:17] <sektor1952> Evening could someone point me to a good howto for apache2 ubuntu its a little bit different then apache on centos
[01:17] <xxCody> I need it for games i guess.
[01:18] <xxCody> Yahoo games
[01:18] <sektor1952> I have a site working but not the correct way
[01:18] <mindrape> sektor1952: what is it you want to know how to do?
[01:18] <n8tuser> !apache > sektor1952
[01:18] <mindrape> sektor1952: what part of it isnt working?  you need PHP?  you need to get perl working?  you need to use htaccess?
[01:19] <rdz> n8tuser, device-mapper was accessing the drive.. in order to properly configure and partition it, i need to do 'dmsetup remove_all'.. now i really can work again
[01:19] <redbuntu> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffa;flids j
[01:19] <Flynsarmy> Anyone know why this command results in mount spitting out all this usage information: sudo mount /dev/sda3 /media/F ntfs-3g defaults,locale=en_AU.UTF-8 0 0
[01:19] <mect> does anyone know about configuring ip tables to enable dcc? I'm confused after installing a firewall and it configuring it, it's not allowing dcc at all
[01:19] <sektor1952> thx n8tuser
[01:19] <mect> even though irc is allowed
[01:19] <Terabyte> hey
[01:19] <n8tuser> rdz -> illl insert those on my notes too,  thanks for the fyi
[01:19] <The_Rebel> how do i get emerald themes to work with compiz in Intrepid?
[01:19] <rdz> n8tuser, thank you for all your help
[01:20] <Terabyte> when is the next version of ubuntu coming out, and what will it include (a link would be good)
[01:20] <redbuntu> hey
[01:20] <sheep> mect: are you connecting to the internet through a router?
[01:20] <jrib> The_Rebel: use emerald as your window decorator
[01:20] <rdz> n8tuser, seems, that _oax had gone already..
[01:20] <sektor1952> thx guys
[01:20] <The_Rebel> im just running the defaults here jrib
[01:20] <jrib> !ccsm | The_Rebel
[01:20] <mect> yeah sheep but I don't think that's the proble, if I turn the software firewall off (guarddog) dcc works
[01:20] <The_Rebel> so i guess i need fusion-icon or is there a command?
[01:20] <redbuntu> @Terabyte next version of buntu comes out when it ocmes out
[01:20] <jrib> The_Rebel: in ccsm you can choose the window decorator
[01:20] <mect> but I'm not sure that's the best idea
[01:20] <The_Rebel> oh sweet
[01:20] <redbuntu> named jaunjty jackalope
[01:20] <mect> I was just wondering if I could do it manually
[01:20] <Terabyte> thanks
[01:21] <sheep> mect: you will need to make sure that ther are ports open in your router that forward to your computer and that your client is set to use those ports for dcc
[01:21] <n8tuser> rdz yes, he may have already
[01:21] <redbuntu> check ubuntuforums.org
[01:21] <The_Rebel> where exactly is this option at?
[01:21] <jrib> The_Rebel: did you install ccsm?
[01:21] <The_Rebel> yes
[01:22] <jrib> The_Rebel: use the search feature
[01:22] <The_Rebel> i did
[01:22] <The_Rebel> and i found a pane called window decorations
[01:22] <The_Rebel> but there's no emerarld option
[01:22] <mect> it is, sheep, files send fine when guarddog is turned off (I've tried adding the ports in guarddog but it still won't work), do you know what to type to configure dcc to work? I mean with iptables?
[01:22] <jrib> !enter | The_Rebel
[01:22] <jrib> The_Rebel: how about a default window decorator?
[01:22] <The_Rebel> ?
[01:22] <dmsuperman> mindrape: It finds the hardware "it says hardware present: yes" but when I try to do "configure network" it says "couldn't find network configuration tool" and when I try using nm as usually it still can't find any
[01:23] <jrib> The_Rebel: you don't see something talking about a default window decorator?
[01:23] <The_Rebel> nope
[01:23] <sheep> mect: I'm not sure.  I usually don't use irc for transferring files
[01:23] <dmsuperman> The_Rebel: The default is "gtk-window-decorator"
[01:23] <mect> ah :( thanks anyway
[01:23] <The_Rebel> right now udner "command:" it says "/usr/bin/compiz-decorator"
[01:24] <redbuntu> That is very weird
[01:24] <dmsuperman> Ah or that
[01:24] <jrib> The_Rebel: yes.  Did you install emerald already?
[01:24] <redbuntu> there are one and one half of loading bars
[01:24] <The_Rebel> no, as i said, i am running the default compiz install here
[01:24] <mindrape> mect - DCC uses a port range which you configure w your client.
[01:24] <dmsuperman> The_Rebel: You could also try "gtk-window-decorator --replace" or "emerald --replace" (if you do "sudo apt-get install emerald" first)
[01:24] <jrib> The_Rebel: install emerald
[01:24] <redbuntu> now black screen
[01:24] <redbuntu> help!
[01:24] <syockit> n8tuser: actually I want to add extents to my partition, but too lazy to make a live disk. Do you think it's possible to tune2fs and fsck from initrd?
[01:24] <The_Rebel> okay, i'll try that now.
[01:24] <redbuntu> I got black screen of death!
[01:24] <redbuntu> ubuntu died
[01:24] <mindrape> BkSOD?
[01:25] <nyaa> terabyte: the versions come out on april and october every year, like 8.4 was april and 8.10 was october, next will be 9.4 (2009, 4th month ect)
[01:25] <redbuntu> after the ubuntu loading
[01:25] <redbuntu> it died
[01:25] <redbuntu> nothing
[01:25] <mect> mindrape, I tried everything such as adding 1024-5999 to tcp and udp in it
[01:25] <redbuntu> on screen
[01:25] <FloodBot1> redbuntu: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[01:25] <mindrape> redbuntu - ALT F1 to get to msg console... anything helpful?
[01:25] <syockit> redbuntu: Not even mouse pointer?
[01:25] <Terabyte> nyaa, ah that makes so much more sense
[01:25] <nyaa> it will be called jaunty jackelope and will focus on faster boot times and those weird net apps
[01:25] <n8tuser> syockit -> i have not modifie my initrd yet, am still reading and absorbing  the materials, i assume you can within initrd with those commands
[01:25] <Terabyte> i see
[01:25] <mindrape> mect - are you using mIRC only?
[01:25] <dmsuperman> mindrape: Any ideas on how to further debug? Wish I could debug on my own but I've never used linux with wireless before so I'm utterly useless here :(
[01:25] <mect> I tried using xchat, irssi, mirc through wine too
[01:25] <jrib> The_Rebel: after you install emerald, set it as your default window decorator
[01:26] <syockit> n8tuser: okay, thanks for the idea. I'm doing my reading now
[01:26] <Shakedown> Is there a way to turn off updates for all the various language packages? I don't want the Belarusian language pack for OpenOffice
[01:26] <Barnabas> wireless works ok with ubuntu?
[01:26] <Barnabas> out of the box
[01:26] <Barnabas> for most chipsets
[01:26] <mindrape> mect - well in mIRC check the DCC port range... if you want I can tell you where to look
[01:26] <The_Rebel> in the "command:" field, jrib?
[01:26] <Barnabas> dmesg
[01:26] <aznboy189> I need help installing ubuntu, can anybody help?
[01:26] <mect> mindrape: if you wouldn't mind :) thank you
[01:26] <mindrape> Barnabas: I'd say its about a 50/50 chance it will work out of the box...
[01:26] <Barnabas> any non recongized hw
[01:26] <jrib> The_Rebel: yes
[01:26] <Barnabas> I disagree
[01:26] <redbuntu> after 1 and one half of loading bars there are nothing
[01:26] <aznboy189> anybody?
[01:27] <nyaa> does anyone know a command to clear your cache (ram cache)?
[01:27] <redbuntu> i suppoose i could try to help
[01:27] <nyaa> the command I've read about isn't allowed for some reason
[01:27] <The_Rebel> ok it's set
[01:27] <The_Rebel> so how do i choose different emerald themes?
[01:27] <aznboy189> I am currently installing it, and it wants me to chose my keyboard layout, after i chose it and click forward
[01:27] <aznboy189> I get the message console setup failed with exit code 2
[01:27] <redbuntu> i have no idea
[01:27] <redbuntu> sorry
[01:28] <redbuntu> name redbuntu away
[01:28] <aznboy189> anybody else?
[01:28] <waldi_> oy, mindrape is here ;)
[01:28] <mindrape> yes, yes I am.
[01:28] <nyaa> I'm looking it up
[01:28] <aznboy189> anybody?
[01:28] <aznboy189> kk
[01:29] <VolVE> hey all, any ideas why running a simple shell script that tars up a couple directories works fine as sudo from the command line, but when I add it to root's crontab, the tar files end-up only being like, 20 bytes ? :/
[01:29] <waldi_> mindrape, do you remember damian? ;P
[01:29] <mindrape> yes... :)
[01:30] <waldi_> hah
[01:30] <dmsuperman> mindrape: In fact...now it doesn't even have a wireless interface anymore
[01:30] <waldi_> so you are the guy with the crazy hobbies :D
[01:30] <mindrape> dmsuperman - maybe the driver load failed...
[01:30] <mindrape> lsmod | more
[01:30]  * [aw] wants Ubuntu to install
[01:30]  * [aw] needs help
[01:31] <zaius> I'm having issues when doing a apt-get upgrade - the machine freezes on Setting up libc6 (2.7-10ubuntu4) - anyone heard of something like this?
[01:31] <mindrape> !ask | [aw]
[01:31] <dmsuperman> mindrape: It lists ndiswrapper but no ath modules
[01:31] <zaius> freezes meaning i can ctrl-c it and it quits, but it just sits there doing nothing
[01:32] <[aw]> When i go to install Ubuntu 8.10 on my computer the install hangs up and says "Timer can't connect to IO-APIC"
[01:32] <[aw]> and ive tried to run the install with "no-apic" params
[01:33] <[aw]> any ideas?
[01:33] <pauly> latest kernel update killed my nvidia FX5200 card I have tried manually installing it and using EnvyNG what do I do not showing up at all in system --> Administration --> HArdware
[01:34] <mindrape> dmsuperman: loading the modules likely failed at boot time then when your rebooted... :(
[01:34] <dmsuperman> mindrape: Any way to reload them?
[01:34] <mindrape> sudo modprobe athk9
[01:34] <thermod> I have a problem with Flash player 10 on Ubuntu 8.04, can anyone hellp me?
[01:35] <[aw]> mindrape: how does the normal ubuntu install go? does it boot up, select lang, hit start, loading bar for a few minutes, then a black screen with white text that says Loading and something about BitBox kernel?
[01:35] <devilbones> Does anyone here know where I can upload a 2.6.28 custom GEM enabled kernel for testing?
[01:35] <jadams_> has anyone here used an m-audio 1010lt with ubuntu?  I heard good things on the forums, but I can't seem to get any audio input working with the mic inputs
[01:35] <jadams_> (I haven't tried the other inputs)
[01:35] <dmsuperman> mindrape: After doing that I have wlan0 back but it can't connect still
[01:36] <devilbones> I have that specific kernel working on a sony vaio fw140e/w laptop
[01:37] <eseven73> thermod: sudo apt-get install ubuntu-restricted-extras  will fix that
[01:38] <punkrockguy318> what's the most reliable way to transcode and burn a dvd movie from a gui ?
[01:39] <thermod> flash plugin non-freee always try to install the version 9 of Adobe that has been removed
[01:39] <devilbones> Is anyone here having problems with the mesa-20090115 or xf86-video-intel-2.6.0 drivers?  I managed also to successfully compile a 2.6.28 intel GEM enabled kernel with drm support
[01:39] <eseven73> thermod: even with what i just told you?
[01:39] <thermod> all version of flash plugin make the same mistake
[01:40] <eseven73> you probably have the wrong ones installed
[01:40] <tsunami> I have a p2900 wireless gaming controller (http://hardware4linux.info/component/32702/) Is this going to work on my ubuntu box?
[01:40] <Dr_willis> adobe is good at moving things.. and breaking the package manager. :(
[01:40] <eseven73> try 'dpkg -l *flash* thermod see if theres any other flash's in there
[01:41] <Guest77004> hello, i've experienced some kernel panic recently on my thinkpad laptop when I leave my it on all night. is there somewhere i could check where it went wrong? such as a log or something?
[01:41] <eseven73> oops i forgot a '
[01:41] <thermod> ok
[01:41] <eseven73> thermod: no quotes on that command of course,
[01:42] <lseeo_leo> leave
[01:42] <thermod> I have tried with the tarball of Adobe Flash
[01:43] <eseven73> thermod: well that works too usually but it's better to get it from the repos
[01:43] <[wine-spark]> you mother fucker
[01:43] <eseven73> O.o
[01:43] <lifenova> !language
[01:43] <[wine-spark]> jajajaja
[01:43] <devilbones> Question, does anyone here know where I can upload a working Intel GEM enabled custom kernel?  2.6.28?
[01:43] <[wine-spark]> no, nobody knows
[01:44] <[wine-spark]> bye dush
[01:44] <devilbones> I am using the kernel now.  Maybe developers can use it for testing.
[01:44] <Guest77004> so is there a error log I could check for kernel panic to see what went wrong? thanks
[01:44] <thermod> the istaller give me an error when I try to inser the path /usr/lib/mozilla/plugins
[01:44] <devilbones> I get full 1600x900 resolution on a sony vaio vgn fw140e/w laptop
[01:45] <mindrape> Guest77004:  tail -f /var/log/messages
[01:45] <Finaldark> anyone know how to set up an IRC server on ubuntu desktop, cause i have NO idea where to start, pst me please
[01:45] <ttols> my mouse pointor freezed. how can I restart mouse driver???
[01:45] <thermod> no plugins if I install on .mozilla/plugins
[01:45] <mindrape> Guest77004: that will show you the end of the log and continue to update it in real time on your screen as new events are written.
[01:45] <Wardy> Evening all
[01:45] <tsunami> I have a p2900 wireless gaming controller (http://hardware4linux.info/component/32702/) Is this going to work on my ubuntu box?
[01:46] <mindrape> Finaldark: get an ircd package... hybrid or something.
[01:46] <Guest77004> mindrape, i see thanks
[01:46] <mindrape> Finaldark - sudo apt-cache search ircd
[01:46] <sockets> ﻿what's the difference between virtualbox ose and virtualbox in ubuntu?.. other than being opensource anyone know?
[01:47] <Guest77004> mindrape, i only see couple of lines, but no error. it looks like the log only shows what happened afeter I've restarted the pc
[01:47] <mindrape> tsunami: your best bet is to google for         ubuntu hardware compatability p2900
[01:47] <mindrape> Guest77004: then try          less /var/log/messages
[01:48] <mindrape> you may need to sudo actually
[01:48] <jrolland-MacBook> Can someone help me? I need to recover /etc/X11/ from Rescue CD
[01:48] <devilbones> who here has mobile intel 4 chipset family
[01:48] <joeb3_> sockets, Intrepid 64 bit loads the ose version.  I see the Sun version available, but that's binary only.
[01:48] <Guest77004> mindrape, ah, so this log basically continually records everything?
[01:48] <tsunami> How can I add a program to boot at startup?
[01:48] <mindrape> Guest77004: yup
[01:49] <lifenova> tsunami: System -> Prefs -> Sessions
[01:49] <ttols> T.T
[01:49] <thermod> In my opinion the problem could be the browser
[01:49] <scunizi> sockets, the binary version direct from virtual box has usb support.. the ose version doesn't
[01:49] <jrolland-MacBook> Anyone?
[01:49] <mindrape> tsunami: edit your /etc/rc.local
[01:50] <jrolland-MacBook> At least, how do I turn off booting into X at startup?
[01:50] <lseeo> what /etc/rc.local file is for?
[01:50] <mindrape> jrolland-MacBook: you just want the files?
[01:50] <mindrape> jrolland-MacBook: you can probably sudo dpkg-reconfigure xserver or something
[01:50] <jrolland-MacBook> Yes, I think I need to configure X
[01:50] <tsunami> thanks guys
[01:50] <Dr_willis> lseeo,  torun commands that you may need to run...  at boot up.
[01:50] <ttols> my mouse pointor freezed now, how can I awake this?
[01:50] <mindrape> lseeo - cat rc.local  and read the first 15 lines...
[01:50] <jrolland-MacBook> But I'm booted into Rescue CD right now
[01:51] <Guest77004> mindrape, around the log time I want to check, it only shows whole bunch of "-- MARK --", do you know what that means?
[01:51] <jrolland-MacBook> Booting into Ubuntu fails because it tries to boot into X and there are no files in X11 directory
[01:51] <mindrape> -- MARK -- is just periodically written to make sure its alive.
[01:51] <jrolland-MacBook> Dunno why
[01:51] <intrepidm> rythmbox tag editing in 8.10, what's the deal
[01:51] <Maahes> I'm having a problem with wine and pulseaudio...or well, pulseaudio in general. I kill pulseaudio, and try to run something via alsa or aoss and I get the following: ALSA lib pulse.c:272:(pulse_connect) PulseAudio: Unable to connect: Connection refused
[01:52] <jrolland-MacBook> How do I turn off booting into X from Rescue CD? I have the hard drive mounted
[01:52] <scunizi> jrolland-MacBook, here's how to stop x from starting on boot.. however ubuntu forums is down for maintainance.. http://ubuntuforums.org/showthread.php?t=43516
[01:52] <Maahes> So now, incidentally, I can't not use pulseaudio
[01:52]  * waldi_ waits for the kernel to compile
[01:52] <Guest77004> mindrape, hmm...  so anywhere else i could check what went wrong?
[01:52] <mindrape> Maahes - do you start and stop the alsa/pulseaudio/etc services from /etc/init.d   using         sudo service WHATEVER start ?
[01:52] <Maahes> mindrape, I have, yes.
[01:53] <Maahes> although I also just kill it
[01:53] <jrolland-MacBook> scunizi: Thanks so much! I will wait until it comes up from maintenence
[01:53] <mindrape> Guest77004: you can try    all the /var/log files... syslog and debug perhaps?
[01:53] <intrepidm> I see something on the rythmbox website about needing id3 support in gstreamer, how do I get that in ubuntu
[01:53] <thermod> eseven
[01:53] <Guest77004> mindrape, ok, thanks
[01:54] <mindrape> intrepidm: sudo apt-cache search id3
[01:54] <scunizi> jrolland-MacBook, google.com was my friend  :)
[01:54] <mindrape> intrepidm: I imagine one of those libs you will need...
[01:55] <intrepidm> mindrape: nothing promsiing, tried looking for a gstreamer.*id3 package aleardy
[01:55] <BeerCan> :^)
[01:56] <mindrape> intrepidm: maybe sudo apt-get install easytag?
[01:56] <bmoll8> hello--i am coming from the fbsd world, where you edit /etc/rc.conf if you want to include different scripts to be executed on startup. Does ubuntu have such an option?
[01:56] <vick> fgfgf
[01:57] <one_> tttttthytytt
[01:57] <Melik> any programs that can stream to icecast like SAM Broadcaster?
[01:57] <bmoll8> I don't want to use SysV
[01:57] <vick> gj
[01:57] <mindrape> bmoll8: /etc/init.d/ and /etc/rc.local
[01:57] <rafamrc> hi, im very new to linux
[01:57] <OneLeggedATLien> irc.osx86.hu
[01:57] <rafamrc> i just installes super ubuntu
[01:57] <rafamrc> i need help with sounds pls
[01:58] <Melik> any programs that can stream to icecast like SAM Broadcaster?
[01:58] <Ent[R]opy> I downloaded and installed Ubuntu Server Edition, booted and logged in. But now i have no idea what to do next. I want to move a website to the Ubuntu server. I have no idea how to generally go about doing anything on a Linux server. I can't find any tutorials or documentation on managing Ubuntu Server Edition.
[01:58] <mindrape> bmoll8: you can also           cd /etc/rc*d/
[01:58] <lifenova> !ask | rafamrc
[01:58] <Maahes> mindrape, so now I have pulseaudio restarted, so aoss/alsa isn't getting unable to connect to pulseaudio, but how do I get alsa/aoss to run by themselves, without wanting to connect to pulseaudio?
[01:58] <[aw]> ent[R]opy
[01:58] <Ent[R]opy> Does anyone know any resources?
[01:58] <[aw]> articles.slicehost.com
[01:58] <scunizi> Ent[R]opy, all html files should go into /var/www
[01:58] <Ent[R]opy> Yes, but how to get them there
[01:58] <[aw]> i learned everything on articles.slicehost.com
[01:59] <Ent[R]opy> aw, i'll check it out
[01:59] <[aw]> k
[01:59] <rafamrc> i get sound in the laptop speakers, but if i connect external speakers, they wont work, the laptop speakers will keep streaming the sound, i have the default sound manager that came with super ubuntu, any ideas?
[01:59] <phanleson> Hi, every body `
[01:59] <mindrape> rafamrc: sudo alsamixer              from a terminal and make sure all the levels are up then Q to exit out.
[02:00] <rafamrc> let me try
[02:00] <mindrape> Maahes - never run multiple sound servers side by side... I'd need to google...
[02:01] <mindrape> Maahes - have you tinkered in System -> Preferences -> Sound?
[02:01] <TecnicoDPC> Just installed ubuntu 8.10 ... all well, ....  But  my  Wireless dose not work.  any ideas ... i installed Ubuntu 8.10  on a  Acer 5315
[02:02] <Maahes> mindrape, its weird, because I still have sound, even though I'm getting pulseconnect errors, and I have everything in system preferences set to use alsa
[02:02] <thermod> Hi all, Adobe Flash Player on Ubuntu 8.04 not working...can anyone help me?
[02:03] <rafamrc> i went to check all the levels and they are all to 100%
[02:03] <jrib> thermod: pastebin the output of: sudo apt-get update && apt-cache policy flashplugin-nonfree
[02:04] <mindrape> rafamrc: no ideas then... sry.  :(
[02:04] <thermod> flash plugin non free try to install the version 9 of Adobe that is removed from Macromedia site
[02:04] <mangal> hai
[02:04] <rafamrc> actually, if i drop the level to 0%, the music is still going
[02:04] <jrib> thermod: let me know when your pastebin is ready
[02:05] <mangal> yes
[02:05] <Ent[R]opy> is there an ftp server installed on Ubuntu Server Edition by default? That way i could get the files of my website on the server. I wouldn't know how else to get them there. I checked out the website [aw] gave, but it does not explain how to get generally get around with Ubuntu Server Edition. As a matter of fact i find it quite difficult to find any recources at all regarding this.
[02:06] <jrib> Ent[R]opy: help.ubuntu.com server guide
[02:06] <Ent[R]opy> Thanks, i'll look into it.
[02:07] <thermod> the output is ready
[02:07] <lifenova> Ent[R]opy:  sudo apt-get install vsftpd
[02:08] <jrib> thermod: what's the url to your pastebin?
[02:08] <Ent[R]opy> thanks lifenova
[02:08] <jrib> !who | thermod
[02:08] <thermod> ok
[02:08] <Luke3> Hey guys
[02:09] <nyaa> thermod look in the other tab I typed stuff to you regarding your issue
[02:09] <lifenova> Ent[R]opy: there's a full guide about configuring vsftpd here: https://help.ubuntu.com/8.10/serverguide/C/ftp-server.html
[02:09] <Luke3> I need a program that I can do video calls with on my Ubuntu PC
[02:09] <Dr_willis> Luke3,  skype can do that. proberly a dozen other progs also
[02:09] <Ent[R]opy> Thanks, i will look into it.
[02:09] <Luke3> I'm having problems with skype though, it says my playback device isn't working right
[02:10] <Lando-SpacePimp> Herro!
[02:10] <lifenova> Luke3: ekiga?
[02:10] <Lando-SpacePimp> Did you know Mr. Ubuntu flew into space?!
[02:10] <Luke3> Say what nova?
[02:10] <jrib> !ot | Lando-SpacePimp
[02:10] <MK13> Luke3: Ekiga softphone
[02:10] <lifenova> Luke3: Ubuntu comes with a program similar to skype by default... Apps -> Internet -> Ekiga Softphone
[02:11] <lifenova> Luke3: and if that's not what you're looking for, I believe empathy has video support for some IM protocols
[02:11] <Luke3> empathy?  alright
[02:12] <jrib> thermod: are you still there?
[02:13] <germen> holaaaaa
[02:13] <Wardy> Hola :)
[02:13] <enovativ> i was just able to log on my wife's account and was able to see my files from my home directory
[02:13] <germen> necesito ayuda
[02:13] <enovativ> is this possible....how can i prevent this
[02:13] <Wardy> vale
[02:13] <jrib> enovativ: that's because your HOME's permissions allow that by default
[02:13] <shagoth> enovativ: permissions
[02:13] <jrib> !permissions > enovativ
[02:14] <germen> no puedo ver videos online streaming que sean por media player en ubuntu
[02:14] <enovativ> jrib: how do i change the "home" permission
[02:14] <IndyGunFreak> jrib, but couldn't she still "see" the files, just not run them by default?
[02:14] <enovativ> do i go to "users and groups" ?
[02:14] <Starhero> Hello all!
[02:15] <jrib> enovativ: no.  Right click on your home directory, go to properties, don't allow "others" any permissions
[02:15] <CyL> how do I make ubuntu accept my native language symbols as I type?
[02:15] <aeosynth> when I first log-in, I get a garbage display, then I hit ctrl+alt+backspace, log in again, and everything works fine. help?
[02:15] <jrib> IndyGunFreak: hmm?
[02:15] <monokrome> hmm
[02:15] <enovativ> jrib: ok
[02:15] <germen> quieeeero ver porno y no puedoooooo
[02:15] <monokrome> My webcam works in Ekiga
[02:15] <quiksilver> i finally got my sound to work in ubuntu, but the quality is fuzzy and atrocious
[02:15] <monokrome> but not in anything else :(
[02:15] <aeosynth> is my default xserver messed up?
[02:15] <gamewolf> !install
[02:15] <quiksilver> what gives?
[02:15] <gamewolf> !automate
[02:15] <gamewolf> !cloning
[02:15] <jer3my> !ndiswrapper
[02:16] <IndyGunFreak> jrib, nevermind, i see what you were teing him, that makes sense
[02:16] <enovativ> exit
[02:16] <enovativ> quit
[02:16] <shagoth> I'm having weird routing issues over my wifi.
[02:16] <shagoth> i can't consistently reach sshd or even ping my server, though for reasons unknown samba routes.
[02:16] <travisman26> hi
[02:16] <CyL> How do I map my keyboard in Ubuntu?
[02:16] <monokrome> Does anyone know why my webcam would work in Ekiga, but not in cheese or camstream?
[02:16] <maxime_l> hi
[02:16] <Starhero> quikserver i am currently compiling my sound card drivers
[02:16] <obf213> all of a sudden my internet on ubuntuy is easily 10x slower than windows over wifi
[02:17] <travisman26> does anyone know how to get eyetoy webcam working with sound
[02:17] <quiksilver> seriously, ubuntu has compromised by sound quality substantially
[02:18] <quiksilver> everything is choppy/fzzy
[02:18] <mindrape> its not "ubuntu"
[02:18] <mindrape> its likely your sound driver
[02:18] <brandon__> sponsered skater
[02:18] <shagoth> if this isn't the place to ask for help on routing issues, i'd be happy to head elsewhere, thoughts?
[02:18] <mindrape> shagoth - describe your routing issues.
[02:18] <Shakedown> What is that CLT for syncing source files on different machines over the network?
[02:18] <quiksilver> mindrape: what do i do?
[02:18] <maxime_l> ubuntu install eee-applet ?? choose the right respositeri
[02:18] <aeosynth> when I first log in my display is garbage, when I do /etc/init.d/gdm restart, i get an error: xserver already started on :0, if I continue tho everything works fine. hitting ctrl+alt+backspace and relogging in works fine. how do i fix my default xserver?
[02:19] <travisman26> how do i make a irc server
[02:19] <shagoth> ok, samba routes from client machines to server fine over wifi from windows machines. I cannot ssh from windows or ubuntu.
[02:19] <brandon__> does any body know how to download stuff and intall them
[02:19] <mindrape> travisman26: sudo apt-cache search ircd            pick one and apt-get install it.
[02:19] <shagoth> i cannot ping from ubuntu.
[02:19] <seravitae> hi there does anyone use bluetooth with ubuntu? im having a really hard time with it
[02:19] <joeb3_> Shakedown, rsync?
[02:19] <mindrape> shagoth - ping google.com         it dont work?
[02:20] <jrib> seravitae: no, but you might want to check bugs.ubuntu.com while you wait as I've seen bluetooth issues popping up a lot lately
[02:20] <shagoth> no, this is respective of my ubuntu server on my NAT only.
[02:20] <Shakedown> Hmm
[02:20] <seravitae> mm
[02:20] <shagoth> the other machines ping each other fine.
[02:20] <brandon__>  does any body know how to download stuff and install them
[02:20] <mindrape> shagoth - are you pinging from a wireless device?
[02:20] <mindrape> shagoth - your router may have AP isolation mode set.
[02:20] <quiksilver> help with my sound quality?
[02:21] <mindrape> quiksilver: lsmod and find the sound driver you are presently using.   then google for known issues w it
[02:21] <jer3my> I have been trying to get my wifi working for a while now, i have tried madwifi and a number of other guides to get it working, Someone pointed me to ndiswrapper, but when i install the driver and look at the screen, i notice it says "Hardware Present: No" yet i know that i have the right driver for my card, can anyone point me in the right direction? Its a Atheros AR242x card.
[02:21] <ima> #openbravo
[02:21] <brandon__>  does any body know how to download stuff and install them
[02:21] <Naeberius> brandon__, go back to Windows
[02:21] <shagoth> mindrape: it doesn't appear so.
[02:21] <nyaa> brandon_ there are a few ways
[02:21] <aeosynth> brandon__: if you're trying to run windows files, get Wine
[02:21] <mindrape> jer3my: http://wireless.kernel.org/en/users/Download#DownloadlatestLinuxwirelessdrivers
[02:21] <brandon__> how
[02:22] <nyaa> you can use the package installers in add/remove programs
[02:22] <MK13> Jeremy: did you make sure to uninstall madwifi, most failed attempts are from leftovers
[02:22] <nyaa> to look for and install specific packages
[02:22] <aeosynth> to get it by GUI, run synaptic package manager, search for it
[02:22] <brandon__> ok wats after that
[02:22] <jer3my> mindrape, thanks
[02:22] <nyaa> look in applications
[02:22] <Starhero> I would like an opinion from anyone that is willing to give it. First let me state that, I am not exactly new to linux, I have been using it since I was 13 on and off. I am 21 now, issue is I still feel I know nothing about linux, but way more then any beginner knows. I would like to finally spend all the time I have to learn it to the point I can be in here and help everyone fix there linux issues.
[02:22] <nyaa> bottom option
[02:22] <jer3my> MK13, blacklisted most of them, uninstalled them as well.
[02:22] <quiksilver> mindrape: i have no idea what im looking for on this screen
[02:22] <brandon__> ok
[02:23] <Starhero> Thing is, I'll get bored and go back to winblows to play games...I need a project...andy suggestions?
[02:23] <nyaa> what games starhero?
[02:23] <Naeberius> brandon__ who told you to install Ubuntu? Ask them. someone really should show you. Otherwise, there are online tutorials.
[02:23] <Starhero> Oh I play anything, right now I am playing a mmo called runes of magic
[02:23] <mect> does anyone here use dcc?
[02:23] <travisman26> starhero there r good games like saurbraten and neutiz and allian areana
[02:23] <travisman26> so on
[02:24] <nyaa> try getting it to run better on linux than on windows =)
[02:24] <waldi_> mmm, sauerbraten
[02:24] <corinth> Does anyone know of a way to get pidgin to recognize and color names like messenger plus! ?
[02:24] <Starhero> www.google.com
[02:24] <Starhero> googling those games
[02:24] <Starhero> brb
[02:24] <FloodBot1> Starhero: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[02:24] <jrib> thermod: you have flash 10 installed, not 9
[02:25] <brodymcd> hi all - can someone help me come up with a command line to rip cds at a given cbr in K3B?
[02:25] <shagoth> mindrape: it absolutely isn't isolating the wireless from the LAN, besides samba works over the wifi to the same server that won't ping
[02:25] <MK13> will APTonCD back up drivers installed?
[02:26] <eseven73> if you installed them via apt-get it should
[02:26] <Naeberius> Anyway, I'm having a problem with my wireless.
[02:26] <mindrape> shagoth: route -FC
[02:26] <jrib> thermod: sudo aptitude purge flashplugin-nonfree && sudo aptitude install flashplugin-nonfree  and pastebin the output to see if you get an error
[02:26] <MK13> kk
[02:26] <obf213> was there some  update that broke ubuntu internt speed
[02:27] <mrwes> brodymcd: google ABCDE -- A Better CD Extractor, it's command line and fast
[02:27] <thermod> I have installed gnash, flash plugin is istalled but I have error 404 not found
[02:27] <Formode> Hello All, does anyone know how to set up Rhythmbox's Jamendo plugin to do Direct downloads?
[02:27] <exodus_ms> Naeberius: go back to windows (not very good advice is it)
[02:27] <CoUrPsE|DeAd> Can i set a variable so instead of typing crap out all the time, just use $variable in my cmd?
[02:27] <xxCody> Hey, can someone tell me how to install jre-6u11-linux-i586-rpm.bin ? Im lost please can someone help me.
[02:27] <CoUrPsE|DeAd> And.. is enviroment variable only for paths
[02:27] <meoblast001> xsane said "Failed to start scanner; invalid argument"
[02:28] <meoblast001> why is it saying that
[02:28] <eseven73> dont install rpm's
[02:28] <meoblast001> should i unplug the scanner and restart it
[02:28] <eseven73> you can get JRE 6 from apt-get
[02:28] <xxCody> Okay download something else?
[02:28] <brodymcd> mrwes: I really want a gui... but k3b needs me to put in a command line to use all the time... I'm having a tough time figuring all that out.
[02:28] <xxCody> Do you know the command
[02:28] <xxCody> I dont.
[02:28] <eseven73> xxCody: look in synaptic for JRE
[02:28] <mindrape> xxCody - sudo apt-get install sun-java6-jre sun-java6-bin
[02:28] <eseven73> ty mindrape
[02:29] <aeosynth> how do i fix my xserver? when I log in, nothing happens unless I go to a terminal and run /etc/init.d/gdm restart
[02:29] <mrwes> brodymcd: K3B is a gui, no? I use it all the time
[02:29] <Formode> Hello All, does anyone know how to set up Rhythmbox's Jamendo plugin to do Direct downloads?
[02:29] <brodymcd> mrwes: it is... but I need a command line to put in the preferences for mp3
[02:29] <Naeberius> exodus_ms oh come on, the guy was asking how to install programs!
[02:29] <asea168> hello
[02:29] <meoblast001> ahh i need these pictures scanned by tomorrow
[02:29] <meoblast001> stupid scanner
[02:29] <brodymcd> it doesn't seem to have that set up by default
[02:29] <Naeberius> That's something a little to complicated to explain over irc
[02:29] <Gosoft> Hello
[02:30] <grafixbadnow> hello, all. I'm new to ubuntu and I want to install 8.10. I just checked the MD5 hash, and it doesn't match what is posted on UbuntuHashes site
[02:30]  * eseven73 must try to remember full names of apps like 'sun-java6-jre' I'm bad at that! :)
[02:30] <meoblast001> i was just scanning images
[02:30] <meoblast001> why does it break now
[02:30] <mindrape> grafixbadnow: you have a re-download in your future if the checksums dont match...
[02:30] <mrwes> brodymcd: you can use sound juicer, it's very easy to use
[02:30] <mindrape> eseven73 - sudo apt-cache search jre  :)
[02:30] <CoUrPsE|DeAd> Can i set a variable so instead of typing crap out all the time, just use $variable in my cmd?
[02:30] <eseven73> mindrape: that's wahat i was gonna suggest to him next
[02:30] <quiksilver> how do i get my sound to pcm instead of master?
[02:30] <exodus_ms> wifi can get a littel complicated to troubleshoot over irc as well ;-)
[02:30] <eseven73> what*
[02:31] <grafixbadnow> thx, mind. I figgerd as much. I was hoping the UbuntuHashes wasn't updated (stupid, I know). I figure 8.1 will fix the nagging grafix probs I'm having w/ 8.04
[02:31] <monokrome> Woo! Webcam works in Flash 10 :o
[02:31] <CoUrPsE|DeAd> say setting an IP to $whatever and using ssh $whatever ?
[02:31] <Luke3> How do I find sound drivers for my laptop that I can install on Ubuntu?
[02:31] <mindrape> CoUrPsE|DeAd: yes... in your .bashrc file in your $HOME directory   cd ~     cat .bashrc
[02:31] <IndyGunFreak> Luke3, whats the sound device?
[02:31] <shagoth> minderape: ok, what do I do with it?
[02:31] <CoUrPsE|DeAd> mindrape, Ta.
[02:31] <mindrape> look at the aliases section
[02:31] <eseven73> mindrape: werent you banned? I cant remember apps names , but i remember who was banned and who wasnt, anways welcome back ;P
[02:31] <Luke3> What's the sound device?
[02:32] <mindrape> eseven73: yeah, they ban me all the time in here...
[02:32] <mindrape> I help people in a way they dont always agree with...
[02:32] <brodymcd> mrwes: The problem I'm having is that I like to change bitrates, and these guis don't seem to have options for that without editing command lines, which is driving me nuts...
[02:32] <mrwes> brodymcd: you using lame?
[02:32] <CyL> Please, any help on how to remap the keyboard in ubuntu?
[02:32] <brodymcd> mrwes: yes
[02:32] <Dein> just a quick question - let's say I want to reinstall ubuntu and I have /home on a separate partition. how to set up partitions upon reinstalling so that I get to keep my home?
[02:32] <brodymcd> mrwes: why can't I just have a bitrate dropdown?
[02:32] <fromero69> I need to edit a file called etc/init.d/mountdevsubfs.sh but I donot know how to get to it, please help me
[02:32] <Luke3> Indy, what exactly do you mean?
[02:32] <eseven73> lol ive only been banned once, cause my stupid bot went nuts in here I didnt mean for the bot to join :(  was banned for 30 days
[02:33] <mindrape> hah.
[02:33] <eseven73> :/
[02:33] <fromero69> I need to edit a file called etc/init.d/mountdevsubfs.sh but I donot know how to get to it, please help me
[02:33] <Flannel> Dein: You'll make a / (and whatever else you want) format it, yadda yadda.  And then mark your home partition for use as /home without partitioning it
[02:33] <shagoth> mindrape: what am I looking for?
[02:33] <mindrape> I just get banned because I troubleshoot things my own way and there are certain ops who are like "wahh... do it my way..."
[02:33] <MK13> is there anything to play proctect dvd's in linux, everything i've tried get buffer overflow etc.
[02:33] <mindrape> shagoth - uhmmm... you were the routing issue, right?
[02:33] <shagoth> mindrape: yes
[02:33] <mrwes> brodymcd: try this:  lame --preset cbr 160 --tt %{title} --ta %{artist} --tl %{albumtitle} --ty %{year} --tn %{number} --tg %{genre} %f %o
[02:33] <Dein> Flannel: so, I just select the mount point /home on my partition where it's now, and not format it? won't that make permission problems?
[02:33] <Starhero> hmm I do have an issue before I can even try those games
[02:33] <shagoth> mindrape: I don't see a route to the server, needless to say.
[02:34] <Starhero> my sound card drivers will not compile correctly
[02:34] <Flannel> Dein: How would it be a permission problem?
[02:34] <fromero69> I need to edit a file called etc/init.d/mountdevsubfs.sh but I donot know how to get to it, please help me
[02:34] <Starhero> normally these drivers come with most distros
[02:34] <mrwes> brodymcd: or  lame -q 2 -b 128 --cbr --tt %title --ta %albumartist --tl %albumtitle --ty %year --tn %number %f %o
[02:34] <CyL> Please, any advice o how to get acents and ubuntu working corrctly together?
[02:34] <mindrape> shagoth - well thats problemo numero uno.  :)
[02:34] <CoUrPsE|DeAd> mindrape, Does basrhrc have to be rehashed somehow?
[02:34] <mindrape> shagoth - iptables -L   any rulesets blocking ping?
[02:34] <Dein> Flannel: well, if my home files have permissions set for me, will the new installation see that home as my home?
[02:34] <meoblast001> anyone?
[02:34] <Naeberius> fromero69: go to places>computer
[02:34] <mindrape> CoUrPsE|DeAd: you probably have to cycle your term... logout and back in.
[02:34] <paul9900> Hey guys...got a little problem...
[02:34] <mindrape> CoUrPsE|DeAd: or just kill the term and start a new one.
[02:35] <CoUrPsE|DeAd> okies, ta.
[02:35] <MK13> fromero69: just type "gedit 'etc/init.d/mountdevsubfs.sh' "
[02:35] <Starhero> make[2]: *** [alsactl_init.7] Error 127
[02:35] <Flannel> Dein: It will see it as you.  You will want to match up UIDs if possible.
[02:35] <Naeberius> then filesystem
[02:35] <brodymcd> mrwes - do I need to take out the words like "albumtitle" or leave them in?
[02:35] <fromero69> sweet thanks
[02:35] <shagoth> mindrape: nope. not on either box.
[02:35] <Starhero> make[1]: *** [install-recursive] Error 1
[02:35] <CoUrPsE|DeAd> perfect.
[02:35] <paul9900> stuck in bootloader 2.5 and cannot connect to WMDC...any way out of it?
[02:35] <CoUrPsE|DeAd> mindrape, Does that stick?
[02:35] <Dein> Flannel: well, most certainly it'll be the same. still didn't hurt to ask :) thank you
[02:35] <Starhero> make[1]: Leaving directory `/root/Desktop/realtek-linux-audiopack-5.09/alsa-utils-1.0.18/alsactl'
[02:35] <Starhero> make: *** [install-recursive] Error 1
[02:35] <Starhero> cp: cannot create link `/usr/lib64/libasound.so': No such file or directory
[02:35] <Starhero> cp: cannot create link `/usr/lib64/libasound.so.2': No such file or directory
[02:35] <MK13> fromero:you may need to use sudo infront
[02:35] <FloodBot1> Starhero: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[02:35] <Starhero> Remove Folder.....
[02:35] <shagoth> well, not the server nor the machine i'm on right now.
[02:35] <Starhero> install: 101: alsaconf: not found
[02:35] <mindrape> CoUrPsE|DeAd: stick?  its permanent til you change it...
[02:35] <Flannel> Dein: As long as the UIDs remain the same, you'll be fine.
[02:35] <CoUrPsE|DeAd> mindrape, cool.
[02:35] <Fife3951> I have a fuppes question if anyone can help me... having trouble with an install.  When installing the package, it says "error:dependancy not available: libavcodec1d."  If I try and get it through synaptic, it says that the file is no longer available.
[02:36] <mrwes> brodymcd: try this one first:  lame -q 2 -b 128 --cbr --tt %title --ta %albumartist --tl %albumtitle --ty %year --tn %number %f %o
[02:36] <mrwes> brodymcd: leave in the title, etc.
[02:36] <aeosynth> when I log in, gdm doesn't start; hitting ctrl+alt+backspace and relogging in starts everything fine. how do I fix this?
[02:36] <CyL> Please, any advice o how to get accents and ubuntu working correctly together?
[02:36] <jrib> thermod: alright, grab the tar.gz from adobe's site
[02:37] <mindrape> Fife3951: try sudo apt-get install libavcodec51
[02:37] <mrwes> brodymcd: when not use the default sound juicer to rip audio cd's?
[02:37] <jrib> thermod: and « sudo aptitude purge flashplugin-nonfree »
[02:37] <eseven73> what file is 'history' for bash saved in?
[02:37] <Naeberius> So my wireless stops working after about 20 minutes.
[02:37] <exodus_ms> .basg_history
[02:37] <Naeberius> faster if im running torrents
[02:37] <eseven73> ty
[02:37] <brodymcd> mrwes - I often want 192, sometimes 64
[02:38] <biouser> where can I steal the avatars that Gnome has for my files?
[02:38] <brodymcd> mrwes- don't know how to change it
[02:38] <aeosynth> when I log in, gdm doesn't start; hitting ctrl+alt+backspace and relogging in starts everything fine. how do I fix this?
[02:39] <jimmy> ubuntu apple gobble
[02:39] <Bitfish> biouser, /usr/share/icons
[02:40] <shagoth> mindrape: routing was add the wrinkle that the server on the wire can ping the machines on the wifi but not vice versa.
[02:40] <mewshi> Hi.  Can I get some help with xorg.conf?
[02:40] <shagoth> err...routing wise
[02:40] <xxCody> I installed java  sudo apt-get install sun-java6-jre sun-java6-bin and now im at Configurin sun-java6-jre
[02:40] <mindrape> mewshi - ask a specific question and we'll try to help.
[02:40] <xxCody> Now what? I cant do nothing
[02:40] <Starhero> I think i may have fixed it on my own, compiling and installing now.
[02:41] <mewshi> I installed a new version of udev (from jaunty) and now it's not finding my keyboard or mouse.
[02:41] <mindrape> xxCody - is there some sort of license agreement it wants you to accept to proceed?
[02:41] <fromero69> is there a way to see what all the programs that I have running and to close them? because one has disappeared and I cannot close it
[02:41] <fromero69> is there a way to see what all the programs that I have running and to close them? because one has disappeared and I cannot close it
[02:41] <mewshi> Last time, I had to add the lines to xorg.conf myself, and I managed to get the keyboard working.  Can someone please help me out with this?
[02:41] <xxCody> Just at the bottom it says <ok> i hit enter nothing happens
[02:41] <fromero69> sorry for double type
[02:41] <mindrape> fromero69: ps aux | grep "progname"
[02:41] <Starhero> fromero69 ...yeah what midrape said
[02:41] <Starhero> *mindrape
[02:42] <Starhero> ...lol nice name
[02:42] <fromero69> from terminal?
[02:42] <Starhero> yes
[02:42] <xxCody> Yes
[02:42] <mindrape> fromero69: if you dont know the name of it then      ps aux | more
[02:42] <Naeberius> When I turn on my laptop, the wireless works fine for 20 minutes or so, then it just stops. Unsecured networks connect but never get access, and secured networks run into a problem verifying the key.
[02:42] <Naeberius> the only fix i've found is restarting
[02:42] <julia> hi all could use help getting brightness keys working on a new vaio
[02:43] <bernhard> is aptitude still recommended for updating?
[02:43] <mindrape> fromero69: then once you've found it look for the PID and           sudo kill -9 PID#
[02:43] <mewshi> Anyone?
[02:43] <Fife3951> mindrape: i thought i already tried that... but it seemed to work!  Thank you!
[02:43] <Starhero> isn't there a taskman type gui program?
[02:43] <mindrape> Fife3951: no problemo
[02:43] <mindrape> Starhero - yeah...
[02:43] <Flannel> bernhard: There's no benefit over the others, no.
[02:43] <julia> if i just try to change the proc values permission is denied, even if I use sudo
[02:43] <Starhero> where?
[02:43] <mindrape> xfce4-taskmanager is what I use sometimes...
[02:43] <Starhero> since i swear I had one once
[02:43] <enovativ> i have tried to change permissions on the user directories and restarted my laptop...tried to log in as a user to see i that user could access my files, and  for some reason it was said that the "/home/username" did not exist
[02:43] <Starhero> will it work on gnome?
[02:43] <mindrape> probably a gnome- one as well
[02:43] <enovativ> why is this?
[02:43] <jrib> thermod: after you do that, put the libflashplayer.so in your ~/.mozilla/plugins/
[02:43] <mindrape> yeah...
[02:43] <Starhero> k
[02:44] <mindrape> enovativ: cd /home           ls -alh
[02:44] <Starhero> look for it in apititude
[02:44] <xxCody> Someone please help i installed java  sudo apt-get install sun-java6-jre sun-java6-bin and now im stuck on package comfiguration in the terminal. It doesnt tell me to hit enter or... okay or anything.
[02:44] <Starhero> *looking
[02:44] <jrib> xxCody: what do you see exactly?
[02:44] <mewshi> Can anyone help me? :(
[02:44] <bernhard> Flannel: i heard from a lot of guys that it handles deps better; also debian reocmmends using aptitude
[02:44] <enovativ> mindrape: i was trying to do it thru "user and groups"
[02:44] <mindrape> xxCody - are you in console mode?  Get back to X  (ALT F6   or maybe its F7?)  and then see if a window popped up for you to click something.
[02:44] <thermod> Firefox can't see the plugin...
[02:44] <mindrape> enovativ - well you will need to use gksudo if you want to do any changes to other users other than your own...
[02:45] <jrib> thermod: did you copy the file where I said and restart firefox?
[02:45] <mindrape> mewshi - xorg.conf problems?
[02:45] <xxCody> I had to press f12 or f11 to se it
[02:45] <enovativ> mindrape: use gksudo at the command prompt
[02:45] <xxCody> Thanks.
[02:46] <mindrape> mewshi - sudo apt-get install pastebinit                          sudo cat /etc/X11/xorg.conf | pastebinit
[02:46] <mindrape> mewshi - give me the URL In this channel...
[02:46] <mewshi> I can't install anything
[02:46] <mewshi> I have to do this from the livecd
[02:46] <mindrape> oh lol
[02:46] <Rocking-W> I have flock extracted to my desktop but need the command to install it please
[02:46] <mindrape> uhmmm.... so you are running Ubuntu from a live cd and your keyboard wont work?
[02:46] <mewshi> I need to add the sections for the keyboard and touchpad
[02:47] <mindrape> Rocking-W: you may need to           ./configure                 make                     make install                        and you may need sudo in front of all of those... depends on what the flock that is...
[02:47] <Dr_willis> !flock
[02:47] <Rocking-W> 2.0.3
[02:47] <mindrape> mewshi - do you know how to get to a terminal and use nano?             sudo nano /etc/X11/xorg.conf          do you need examples of a keyboard section?
[02:47] <Dr_willis> I would check the flock docs/page carefully and look for ubuntu packages.
[02:47] <atom^x> Rocking-W: isnt flock a bin
[02:47] <mewshi> I need a proper keyboard section for my laptop
[02:48] <mewshi> And I'm on the livecd - I can, however, still edit xorg.conf :)
[02:48] <Rocking-W> tar
[02:48] <fromero69> is there a difference between ubuntu 8.10 intreped and ubuntu 8.10 intreped ibex?
[02:48] <Dr_willis> http://brentroos.com/2006/07/24/install-flock-on-ubuntu/
[02:48] <Rocking-W> tar bz2?
[02:48] <Starhero> hmm i still can't seem to get this sound to work
[02:48] <nyaa__> fromero69 they are the same thing one's just a shortened name
[02:48] <Dr_willis> fromero69,  the full cute name is   intreped ibex,
[02:48] <fromero69> k ty
[02:48] <mrwes> brodymcd: instead of vbr use the -b 112 setting
[02:49] <Luke3> On Skype for Linux when I try to call someone it says "problem with audio playback"
[02:49] <Luke3> Is that my speakers or microphon
[02:49] <Luke3> e
[02:49] <Starhero> If anyone knows what the Asus G1 is that is my laptop, that is here for ref. on what my hardware is
[02:49] <atom^x> Rocking-W: extract to home dir:cd to flock dir then run flock
[02:49] <Starhero> it uses the RTHD driver
[02:49] <Starhero> I am wondering if I will need to reboot linux for the sound that was ...supposivly ...compiled to work...
[02:50] <Brack10> anyone have any luck integrating Ubuntu with Active directory via likewise open?
[02:50] <ldlework> Is there an easy way I can convert my default Python 2.5 to Python 2.6?
[02:50] <Starhero> But if I am not mistaken, this isn't windows.. :) windows loves to reboot
[02:50] <Rocking-W> thanks atom^x
[02:50] <nyaa__> Starhero: I had to reboot once to get something to work, it's rare but it happens
[02:50] <Starhero> ok then, I will be back
[02:51] <spiritwebb> Have a question involving the 3d
[02:51] <atom^x> Rocking-W: no prob
[02:51] <spiritwebb> I have a Daewoo 719b monitor and when I attempt to run anything 3d, like Blender for example
[02:51] <spiritwebb> it wont work, all I get are lines across the screen...how do I fix this?
[02:51] <nyaa__> sprirtwebb have you enabled the 3d drivers?
[02:52] <spiritwebb> installing the OpenGL and Python, then yes...otherwise how do I enable them?
[02:52] <nyaa__> spiritwebb go to system > administration > hardware drivers
[02:53] <spiritwebb> the only thing in my hardware drivers are the wireless drivers...thats it
[02:54] <nyaa__> what graphics card do you have?
[02:54] <miranda_psi> spiritweb: what graphics a=card do you have?
[02:54] <spiritwebb> thats a good question...this computer was givin to me.
[02:54] <spiritwebb> its a built in graphics card I know that
[02:54] <CoUrPsE|DeAd> lol.
[02:54] <nyaa__> I sent a dialog to you
[02:55] <miranda_psi> spritwebb: try "lspci | grep VGA"
[02:56] <spiritwebb> Intel Corportaion 82815 Chipset Graphcs Controller (CGC) (rev 02)
[02:57] <Flannel> bernhard: That hasn't really been accurate for a couple of years now.
[02:57] <siriker> hello all
[02:57] <iNtERrUpT> hi
[02:57] <spiritwebb> like I said, I'm running a Daewoo 719b monitor, would that be the cause, or...?
[02:58] <jmiller56> hi
[02:59] <miranda_psi> spiritwebb: yeah - that looks like a built in intel graphics
[02:59] <miranda_psi> spiritwebb: can you paste up the contents of you /etc/X11/xorg.conf file to pastebin?
[02:59] <spiritwebb> yeah, so I'm trying to figure out why when I run like Blender or Anim8or, the program opens, but horizontal lines go everywhere, and I can't see it.
[03:00] <spiritwebb> idk how to do that
[03:00] <spiritwebb> im new to Ubuntu
[03:00] <miranda_psi> !paste | spiritwebb
[03:00] <CoUrPsE|DeAd> spiritwebb, sudo apt-get install pastebinit
[03:00] <miranda_psi> spiritwebb: to open the file just use any text editor you like...
[03:01] <CoUrPsE|DeAd> then: pastebinit /etc/X11/xorg.conf
[03:01] <jtaji> spiritwebb: do you have compiz enabled?
[03:01] <donavan_> opion question here .... I currently have 2gb of ram running at 667 but I have another 2gbs sitting here that will only run at 400 mhz is it worth it to loose the speed and gain the ram?
[03:02] <jtaji> spiritwebb: system > prefs > appearance > visual effects tab... set to None
[03:02] <spiritwebb> have what enabled...<<< is so lost
[03:02] <DasEi> donavan:spoke in the dark no, depends on your habits/needs
[03:03] <spiritwebb> oh, yeah its set to none
[03:03] <donavan_> DasEi.... I dont game or really run any 3d apps ... I do run virtual machines though
[03:04] <DasEi> donavan:as this isn't ubuntu related, pm me or ask #hardware
[03:04] <felixsulla> sudo sh ./VboxLinuxAdditions-x86.run
[03:04] <felixsulla> That just produces sh: Can't open ./VboxLinuxAdditions-x86.run
[03:04] <felixsulla> Anyone know whats wrong?
[03:05] <siriker> i hate linux
[03:05] <obf213> me too
[03:05] <siriker> oh, my friend
[03:05] <mindrape> obvious trolls are obvious.
[03:05] <rowa> hello
[03:06] <mindrape> hi rowa
[03:06] <mindrape> and bye...
[03:06] <schmiddy`> Hi.. I am trying to make a .deb of a Python package called ffnet. I've already made a need-packaging bug request (# 317741) , but am trying to build on my own and encountering difficulties
[03:06] <jmiller56> hi
[03:06] <julia> anyone know the cause? : echo -n 20 > /proc/acpi/video/OVGA/DD02/brightness
[03:06] <julia> bash: /proc/acpi/video/OVGA/DD02/brightness: Permission denied
[03:07] <schmiddy`> I have a  snipped paste of the output after running "dpkg-buildpackage -us -uc" (I'm following the instructions for debianing a Python distutils package here: https://wiki.ubuntu.com/PackagingGuide/Python ) -- the paste is here: http://pastebin.com/m16d7cea0
[03:07] <keith__> All of the sudden, my videos are playing in slow motion and I don't think I did anything to cause it... anyone know how to fix it?
[03:07] <julia> its on a vaio and I can't set the brighness
[03:07] <iNtERrUpT> does anybody know how to fix this problem about ss5?
[03:07] <iNtERrUpT> [ERRO] Error opening log file$
[03:07] <iNtERrUpT> System Error:
[03:07] <iNtERrUpT> : No such file or directory
[03:07] <inertial> what should i do to make a usb device that is not accessible as a normal user accessible? it is not a storage device
[03:08] <siriker> keith__, format this PC
[03:08] <Claire2009> HELP! - need to find out what version of mozilla firefox i'm using firstly.
[03:08] <Starhero> Ok I am back
[03:08] <Starhero> sound is working
[03:08] <mindrape> Claire2009: pull it up and go to the Help -> About menu
[03:08] <miranda_psi> Claire2009: open firefox and go help -> about
[03:08] <Claire2009> mindrape - thanks
[03:09] <Claire2009> miranda_psi - also, thanks
[03:09] <Starhero> Anyone know anything about unetbootin? I have another computers that is not finding the root FS on boot
[03:09] <jmiller56> Claire go into the terminal and type in firefox --version
[03:09] <Starhero> I am stuck in a bash shell
[03:09] <mindrape> Starhero - type exit  ?
[03:09] <space_cadet> hey all, anyone ever heard of this...     someone removed ubuntu 8.04, clean installed 8.10  then booted to linux, then booted to windows...   in windows (after this process)  his network card says "network cable unplugged"
[03:09] <Claire2009> second question - does anyone know if 3.0.5 is the most up-to-date version of firefox?
[03:09] <ldm> hello
[03:09] <Starhero> No I mean on another computer mindrape
[03:09] <mindrape> Claire2009: go to www.getfirefox.com and find out.
[03:10] <Claire2009> mindrape - k
[03:10] <Starhero> I have this Asus G1 that is on ubunto
[03:10] <mindrape> Starhero  -  login on another tty and ps aux and kill the pid of the bash session?
[03:10] <workingchair> Hey guys, I see that the Doom game's source code is free, but how do I get the actual game?
[03:10] <Claire2009> mindrape - found info. thanks
[03:10] <Starhero> Ok let me state again, I have another computer that is trying to boot a live cd and it can't find the root filesystem
[03:10] <siriker> i hate fedora, i love ubuntu
[03:11] <siriker> haak haak
[03:11] <jmiller56> fedora is wicked too
[03:11] <mindrape> siriker: can we help you w something?
[03:11] <jmiller56> some good things about it as well
[03:11] <Starhero> siriker funny, i am installing that distro on another pc
[03:11] <Starhero> never tryed it
[03:12] <keith__> siriker: That would be one option... yes. However, I think I shall try restarting first.
[03:12] <CyL> How do I change character encoding in ubuntu?
[03:12] <Starhero> Who here things they are REALLY REALLY REALLY good at linux, if so, I need your help...since if I can learn how to do what I am about to do on the other pc...i can then use almost any linux
[03:13] <space_cadet>   someone removed ubuntu 8.04, clean installed 8.10  then booted to linux, then booted to windows...   in windows (after this process)  his network card says "network cable unplugged"
[03:13] <mindrape> Starhero - why dont you just ask the Q and we will see if anybody knows...
[03:13] <Starhero> The computer I am speaking of is currently stuck at (one would assume) and emergency bash shell, it CANNOT find the root file system.
[03:14] <Claire2009> question - does anyone know why some videos on youtube skip?
[03:14] <mindrape> Starhero -what were you trying to do?  did you pass special parameters to grub to get to where you are?
[03:14] <Starhero> FIrst you must kno how I am installing fedora, or any linux distro for that matter. I am sure you have heard of UNETBOOTIN
[03:14] <mindrape> Claire2009: you probably have a crappy video card or small amt of RAM.
[03:14] <rsmith16384> claire some have higher bandwidth than others
[03:14] <Claire2009> i have high bandwidth.
[03:14] <rsmith16384> and may not bode well with your connection
[03:14] <Starhero> that is the only way i can ...since I don't have cds.
[03:15] <thermod> jrib are you here?
[03:15] <mindrape> Claire2009: having a fast internet connection is only part of it.  You also need to have a good graphics card and enough system memory to be able to run things w/o it being "skippy"
[03:15] <rsmith16384> skip at the same spot everytime?
[03:15] <rsmith16384> or is it different everytime?
[03:15] <Starhero> What is wrong with it tho is that alot of distros can't mount the root files system....i am baffled on why some and not all
[03:16] <space_cadet> anyone??
[03:16] <Claire2009> mindrape - i haven't had a problem with youtube until tonight
[03:16] <thread> anybody have any idea why my video in, say, totem-gstreamer might be stretched vertically?
[03:16] <thread> example: http://threadbox.net/broke-gstreamer.png
[03:16] <DasEi> space_cadet: maybe the truth ?
[03:17] <mindrape> space_cadet: in Windows you need to go to Device Manager and see if there are issues w the device.. i'd ask in #windows
[03:17] <rsmith16384> space, linux did it
[03:17] <tonsofpcs> thread: scaling? pixel aspect combined with image aspect settings?
[03:17] <space_cadet> mindrape, he has, to no avail
[03:17] <siriker> who like fedora, put your hand up
[03:17] <rsmith16384> it BROKE the card
[03:17] <space_cadet> rsmith16384, but it still works in linux
[03:17] <rsmith16384> horrable linux
[03:17] <Claire2009> i burn all fedora
[03:17] <thread> tonsofpcs, any idea where i would tweak such settings?
[03:17] <rsmith16384> :)
[03:17] <iNtERrUpT> does anyone know about ss5?
[03:18] <iNtERrUpT> :(
[03:18] <tonsofpcs> thread: in the prefs/options/settings of that app maybe? [nfc]
[03:18] <mindrape> !ss5
[03:18] <DasEi> space_cadet: there is no special with linux, it's a windows prob then (or a connection, f.e. router) prob
[03:18] <miranda_psi> thread: its probably misreading the video aspect or the video file has incorrect aspect ratio
[03:18] <thread> miranda_psi, the video file is fine. I can play them back fine in x11 mode
[03:18] <thread> but the performance is terrible
[03:19] <thread> where is the aspect ratio configured (that ... i guess gstreamer is gonna read from)
[03:19] <Nautilus__> What's the best way to install Flash? It's been a few days but I think I just went to their site and downloaded the 'deb for ubuntu' version but didn't get it installed
[03:19] <whacked> thanks for helping SpaceCadet
[03:19] <KB1OHY> how come in Ubuntu 8.10 I installed gnome the user manager doesn't work? It doesn't list any accounts or anything.
[03:19] <CoUrPsE|DeAd> I think my gfx drivers are no good.
[03:20] <siriker> my hdd is very noisy, i broken it. i should buy ssd ?
[03:20] <whacked> it is I that is having issues with windows xp
[03:20] <CoUrPsE|DeAd> can someone please help me to set virusal effects other than to none?
[03:20] <Wicked> !sound
[03:20] <mindrape> siriker: no.
[03:20] <CoUrPsE|DeAd> i have radeon 9700 pro.
[03:20] <Nautilus__> siriker: probably not, pricey for the good ones.  google for 'SSD stutter'
[03:20] <whacked> immediately after preforming a clean install of 8.10 on my dual boot
[03:21] <miranda_psi> thread: what do you mean its fine in x11 mode?
[03:21] <thread> miranda_psi, gstreamer-properties ... i was able to configure the gstreamer video driver there
[03:21] <whacked> yeah but pulse audio takes over Alsa
[03:21] <whacked> well it did in my case
[03:22] <whacked> i had to disable all of pulse audio in order to get my sound card to work
[03:22] <miranda_psi> thread: that is just the driver that gstreamer uses to output the video (it shouldn't affect the video ratio)
[03:22] <whacked> i have a M-audio 24/96 card
[03:22] <whacked> oh
[03:22] <thread> miranda_psi, well it does.
[03:22] <whacked> sorry
[03:22] <whacked> opps
[03:22] <space_cadet> whacked me to.
[03:22] <space_cadet> whacked asus m70vm-x1 on the message boards is me.
[03:22] <miranda_psi> thread: what driver where you having problems with?
[03:23] <Fezzler> Anyone have a Palm device working with Evolution?  USB cradle?
[03:23] <thread> miranda_psi, Xv. it makes the video nice and smooth.
[03:23] <Nautilus__> how to install Flash? If via Synaptic, which is the right package (numerous ones found by searching for flash)
[03:23] <GullyFoyle>  /quit
[03:23] <whacked> http://idyllictux.wordpress.com/
[03:23] <siriker> i have intel extream CPU
[03:23] <siriker> it is very cheep
[03:23] <whacked> well if you decide to install ubuntu here a fix for sound card
[03:25] <whacked> i would like to try the RT kernel for linux
[03:25] <whacked> but my system does not like it
[03:25] <miranda_psi> thread: yes xv is more efficient than the x11 driver - do you get the same problem with other players (e.g. mplayer)
[03:25] <mindrape> whacked: what are you doing that requires a RT OS?
[03:25] <thread> miranda_psi, yeah, I get the same issue in miro as it employs gstreamer... mplayer works fine, though
[03:25] <whacked> nothing really other than testing
[03:25] <whacked> playing
[03:26] <miranda_psi> thread: using xv in mplayer?
[03:26] <whacked> where can you check latency on linux commmand or something
[03:26] <dale> ne one in here who wouldn't mind helping a newbie
[03:26] <miranda_psi> !ask
[03:26] <siriker> i want buy intel Q6600 querd core, how much it is ?
[03:27] <thread> miranda_psi, yeah, actually... it is the xv driver that is working fine for mplayer
[03:27] <DasEi> siriker: #hardware,   ebay
[03:27] <dale> trying to learn how to compile and install the latest openmovieeditor
[03:27] <siriker> should i go to ebay ?
[03:28] <DasEi> !ot > siriker
[03:28] <miranda_psi> thread: then its probably a problem with the way gstreamer is talking to the xv driver - if you want to use the xv driver with totem you could try totem-xine
[03:28] <iNtERrUpT> !ot
[03:28] <mindrape> DasEi - he's a troll... feel free to use that /ignore feature
[03:28] <Fezzler> anyone know anything a about a new device "usb:" as opposed to "ttyusb0" or "ttyusb1"
[03:28] <DasEi> mindrape: thx for info
[03:29] <whacked> where can you check latency on linux   ? command or something ? for sound card
[03:29] <whacked> is this too off topic
[03:29] <Shakedown> I'm trying to use rsync and it's using ssh, which I have a passphrase set up for, so rsync is prompting me for the passphrase for the ssh key, yet it's giving me the "Permission denied (publickey)" message. What does this mean?
[03:30] <Fezzler> my last Ubuntu hurdle - getting my Palm m500 to sync with Evolution.  But how?
[03:30] <thread> miranda_psi, yeah, xine is an option... i'd sorta rather just figure out what's wrong with gstreamer tho
[03:30] <thread> miranda_psi, we'll try at this a little longer ;) thanks anyway
[03:30] <whacked> i am confused about best configuration for sound card with linux, with windows it was easy get the asio driver to bypass windows core = nice latency
[03:30] <nyaa__> does anyone know a way to clear your cached ram that works in 8.10?
[03:30] <Fractured> hey guys is there anyway to put multiple linux OSs on one USB sticks bootable? ala with grub?
[03:30] <mindrape> whacked: http://www.lmgtfy.com/?q=ubuntu+latency+sound+card&btnG=Search
[03:31] <siriker> i want change shell text color, how can i do ?
[03:31] <Rocking-W> atom^x:  i found the addy for flock deb download with installer
[03:31] <mindrape> sirikir    .bashrc
[03:31] <DasEi> ﻿Fractured: that will work if usb is big enough
[03:31] <Fractured> 8 gigs should do it?
[03:32] <Rocking-W> atom^x:  should I post the addy?
[03:32] <fromero691> hi guys I am trying to edit a file but it will not let me save it, it says I do not have permission to save
[03:32] <joeb3_> Shakedown, if you are trying to use ssh keys, you need to load ssh-agent
[03:32] <fromero691> how do I get around it?
[03:32] <nyaa__> wouldn't it need to partition the thumb drive in some cases?  0_o
[03:32] <whacked> why thank you Mindrape
[03:32] <mindrape> fromero691: gksudo gedit /path/to/thefile
[03:32] <miranda_psi> thread: maybe try the gstreamer channel (/join #gstreamer)
[03:32] <Shakedown> but I can ssh into the machine I want to rsync to
[03:32] <mindrape> anytime Whacked
[03:32] <thread> miranda_psi, i asked there first :)
[03:32] <DasEi> ﻿Fractured: 2 distros, if you absolutely want to 3, recommended 1
[03:33] <Shakedown> The passphrase works when using ssh, but when using rsync, which appears to go through ssh, the passphrase doesn't work
[03:33] <joeb3_> Shakedown, from the same terminal window?
[03:33] <siriker> i open .bashrc file, how can i do ?
[03:33] <Shakedown> yeah
[03:33] <atom^x> Rocking-W: if it is not an official deb file i would not...
[03:33] <Rocking-W> it is
[03:33] <Chat> as
[03:33] <eross> running gnome or just about any other window manager, why when i press the right mouse button sometimes the window expands and other times i can move it around like I intended to??
[03:34] <eross> pressing button on the title bar of the window, such as pidgin or other open app
[03:34] <Rocking-W> atom^x:  it's at deb get
[03:34] <eross> oops i meant left mouse button, sorry
[03:34] <atom^x> Rocking-W: if it came from ubuntu then it should be fine
[03:34] <Ent[R]opy> I've installed Ubuntu Server Edition and chose the LAMP installation at setup. I'm intending to use Python. However what i'm wondering is what interface Ubuntu has installed between Python and Apache. Is it mod_Python or FastCGI or...?
[03:34] <Rocking-W> ok
[03:34] <Rocking-W> thanks
[03:35] <bernhard> is there a webcam utility for kde?
[03:35] <Ent[R]opy> Does anyone happen to know?
[03:35] <mindrape> Ent[R]opy: looks like modpython
[03:36] <Ent[R]opy> Are you sure?
[03:36] <Firewall27> Hola amigosssssss necesitaria que alguien me ayude con el sonido en Ubunut 8.4
[03:36] <siriker> i want to change shell text color, explain detail please
[03:36] <mindrape> Ent[R]opy: based on googling            ubuntu LAMP python httpd.conf          the AddHandler mod_python .py comes up
[03:36] <Fractured> ya i just want like 2 distros
[03:36] <edju_> at boot, every boot message shows up twice as everything scrolls by.  no problems actually booting - it's just irksome.   2.6.24-22-generic kernel.  any suggestions appreciated.
[03:36] <Ent[R]opy> Ok thanks, that must be it then. Just wanted to know.
[03:36] <Firewall27> alguien habla español¿
[03:36] <Bob_Dole> so, how do I create a launcher using 2 commands? like.. CDing to a folder, and then running the program?
[03:36] <Firewall27> ¿?
[03:36] <whacked> If i boot from cd, Windows Xp cd on a dual boot will i be able to boot past grub loader and eventually get to allocation of disk section of install ?
[03:36] <mindrape> siriker: http://www.lmgtfy.com/?q=bash+change+color+.bashrc
[03:37] <Bob_Dole> and then running as porgram in that folder*]
[03:37] <whacked> sorry maybe wrong location
[03:37] <siriker> thax mindrape
[03:37] <siriker> thanx mindrape
[03:37] <mib_y0wmio> hi
[03:37] <Firewall27> how can help me,  whit sound in ubuntu 8.4 and pulse audio¿????? pleaseeeeeeeee
[03:37] <Firewall27> :(
[03:37] <CoUrPsE|DeAd> I have nothing in my Hardware drivers cept for "no hardware is using any properity drivers"
[03:37] <mib_y0wmio> can somebody help me
[03:37] <jimmy_hoffa> The Illuminati is REAL! Go to these websites and educate yourself before it's too late for humanity: projectcamelot.org disclose.tv. abovetopsecret.com and google: Zeitgeist movie. Please educate yourself to the truth.
[03:37] <CoUrPsE|DeAd> Any ideas how to install the ATI binary drivers?
[03:37] <mindrape> jimmy_hoffa: you want to get banned or would you like to leave?
[03:38] <Melik> any good GUI programs capable of streaming to a icecast server?
[03:38] <mindrape> !spam jimmy_hoffa
[03:38] <eross> is there a ubuntu hardware irc channel?
[03:38] <iNtERrUpT> ubottu, i knew you're idiot.
[03:38] <iNtERrUpT> ok ok
[03:39] <DasEi> ﻿!spam | jimmy_hoffa
[03:39] <mindrape> eross - ubuntu is a distribution.. it doesnt have specialized hardware.
[03:39] <Zuwer> Hi. Someone happened to my PC and now I get Grub: Error 22
[03:39] <Firewall27> my firend's...
[03:39] <Firewall27> some one help me???
[03:39] <Firewall27> please
[03:39] <eross> !ask, Firewall27
[03:39] <Firewall27> and sory whit me english :P
[03:39] <eross> !ask
[03:39] <DasEi> Zuwer: seems grub can't find needed files, see:
[03:40] <DasEi> !grub
[03:40] <LaQuirrELL> hi all   i have a bit of an emergency [for me]   One of my harddrives is too full and i don't know what to do can anyone help
[03:40] <eross> well there should be a hardware compatibility channel
[03:40] <DasEi> Zuwer: first link, or check manually menu.lst and according files
[03:40] <Bob_Dole> "one line" is relative. currently what takes up one line on my normal PC takes up 3-4 on this one. small resolution :)
[03:40] <Zuwer> I've tried that Grub thing, and it didn't work.
[03:41] <Faust-C> im trying to create a wireless AP for my home network using a USB WWAN card and a linksys lan card
[03:41] <mindrape> LaQuirrELL: df -h and confirm its full to the brim... du -h --max-depth 1 /     <--- that will show you from the root whats consuming most
[03:41] <whacked> has anyone performed a clean install of windows on a dual boot with linux and grub ?
[03:41] <eross> i have to press my wireless mouse button really hard to grab and move a window, or it will just expand the window, in gnome.
[03:41] <Bob_Dole> Windows installed after linux will break things
[03:41] <Firewall27> How can I set my ubuntu 8.4 sound to be played simultaneously by more than 1 program?????
[03:41] <dataspy> does anybody know the command to show all computers on your network?
[03:41] <Faust-C> im using firestarter and still cant get things to work correctly
[03:42] <uberFUBAR> hi, what's the command to find out who is accessing shared network files?
[03:42] <mindrape> dataspy - you can nmap to get a list...
[03:42] <whacked> oh great
[03:42] <LaQuirrELL> if i try to start a program or try to delete anything i get an error msg
[03:42] <Bob_Dole> linux installed after windows is a -much- better idea
[03:42] <siriker> i installed linux and i want to install windowsXP, help me in configure TT
[03:42] <eross> Firewall27 - are you using onboard audio on the motherboard?
[03:42] <LaQuirrELL> and i can't start a terminal
[03:42] <Firewall27> How can I set my ubuntu 8.4 sound to be played simultaneously by more than 1 program?
[03:42] <whacked> but i can no longer connect with windows
[03:42] <whacked> to the internet
[03:42] <DasEi> !who | zuwer
[03:43] <dcsollows> how do i get the ubuntustudio default login screen to appear instead of the text based terminal
[03:43] <whacked> after preforming a clean install of 8.10
[03:43] <dcsollows> ?
[03:43] <Firewall27> How can I set my ubuntu 8.4 sound to be played simultaneously by more than 1 program?
[03:43] <DasEi>  zuwer : got a live cd ?
[03:43] <dcsollows> Firewall27: try pulse?
[03:43] <Firewall27> sii
[03:43] <Firewall27> sory
[03:43] <Firewall27> jaja
[03:43] <Faust-C> Firewall27: ive only had luck doing that w/ either alsa or oss
[03:43] <dubi> can anyone tell me how i can be 1337?
[03:43] <Faust-C> but depends on snd card
[03:43] <Bob_Dole> How do you do multiples commands on one line in CLI? I mean, without hitting enter.
[03:44] <atom^x> ha
[03:44] <whacked> i tried Mark solution for getting pulse audio to work no luck
[03:44] <Fezzler> Last call.  How do I enable a device (ttyUSB0) using undev or editing fstab etc.
[03:44] <Faust-C> Bob_Dole: && or ;
[03:44] <Barnabas> bob : ;
[03:44] <Bob_Dole> Faust-C, Thank you.
[03:44] <Faust-C> Fezzler: that a usb nic
[03:44] <Fezzler> trying to get older Palm sync'd with Evolution
[03:44] <Faust-C> yw
[03:44] <dubi> Faust-C what is the difference between && and ;
[03:44] <Faust-C> Fezzler: oic .... thats a odd one
[03:44] <LaQuirrELL> mindrape:  my root hard drive is 99% full
[03:44] <grinn> can anybody help me configure evolution?
[03:44] <Fezzler> Faust-C: Come again?
[03:44] <Faust-C> & will run all at the same time
[03:45] <dayo_> i've set my root password. how do i remove it again?
[03:45] <DasEi> Bob_Dole: && is a conjunction, but if cmd fails, it brackes, gotto check redirecting or - better n trickier- scripting
[03:45] <Faust-C> ; waits till its done w/ first command
[03:45] <mindrape> LaQuirrELL: can you CTRL ALT F2 and login?
[03:45] <siriker> i want to rest, bye -
[03:45] <dubi> ty
[03:45] <Shakedown> Anybody know a tutorial on how to set up an rsync server?
[03:45] <Faust-C> brb
[03:45] <Faust-C> Shakedown: thats easy
[03:45] <Enissay> In compiz, how to know wich viewport match with wich desktop?
[03:45] <Shakedown> Walk me through it then, please
[03:45] <LaQuirrELL> mindrape   will try
[03:45] <Firewall27> 	if you try to configure all audio press like this in this picture http://www.subirimagenes.com/imagen-pantallazo-1825922.html , but not funcionaa, only the sound one application ..
[03:45] <Faust-C> Shakedown: google for it, its very east
[03:45] <Faust-C> easy*
[03:46] <Faust-C> bbiab
[03:46] <Shakedown> I've found a tutorial on everythinglinux.org/rsync, but it's leaving out some details I don't know how to deal with
[03:46] <Zuwer> DasEi: Yes I do.
[03:46] <Zuwer> DasEi: PM would be easier?
[03:46] <doc|home> anyone using amd64 managed to get skype working?
[03:46] <Faust-C> Shakedown: such as
[03:46] <doc|home> I'm having a problem with sound output
[03:46] <doc|home> "Problem with audio playback"
[03:47] <Shakedown> Setting up the rsyncd.conf file
[03:47] <Shakedown> And the various other files given in the .conf
[03:47] <Firewall27> Know someone fix this?
[03:47] <Firewall27> please
[03:47] <whacked> problem with sykpe and pulse audio i read somewhere recently
[03:47] <[[mandrix]]> the heck... someone is messing with the network again
[03:47] <dayo_> i've set my root password. how do i remove it again?
[03:47] <mindrape> !root
[03:48] <Firewall27> 	Where can I get official support for Ubuntu??
[03:48] <grinn> what do i write for "server" on evolution for a gmail account?
[03:48] <Firewall27> 	Where can I get official support for Ubuntu?
[03:48] <Firewall27> 	Where can I get official support for Ubuntu?
[03:48] <mindrape> https://help.ubuntu.com
[03:48] <Barnabas> cannonical.com
[03:48] <Bob_Dole> Mostly, I'm having issues starting a command line app with a launcher, trying to start folding@home but it is bloody well determined to use the wrong directory(starts a new work directory and config file)
[03:48] <rww> grinn: Are you using IMAP or POP?
[03:49] <doc|home> whacked: any idea how to fix it?
[03:49] <Firewall27> yes but chat....
[03:49] <CryptZombie> Anyone around to help me with a desktop install boot problem?
[03:49] <Ultraputz> what is the name of the icon that nautilus uses to show trash in the shortcut sidebar ?
[03:49] <grinn> rww: i believe it's imap
[03:49] <Bob_Dole> I can do it in the terminal, but not with a launcher
[03:49] <whacked> trying using alsa drivers
[03:49] <clifford> #vnc
[03:49] <Ultraputz> for that matter, is there a list ?
[03:49] <grinn> rww: that's what i iremember using for my phone
[03:49] <Shakedown> Faust-C: What do you think?
[03:49] <clifford> JOIN #VNC
[03:49] <rww> grinn: The settings you'll need are at https://mail.google.com/support/bin/answer.py?answer=78799&topic=12920
[03:49] <grinn> thanks rww!
[03:50] <rww> grinn: e.g. for incoming server, do imap.gmail.com:993
[03:50] <doc|home> whacked: got any idea where I can get info on setting that up with skype?
[03:50] <rww> grinn: https://mail.google.com/support/bin/answer.py?answer=78892&topic=12920 is also useful, though some of the settings it recommends aren't available in Evolution.
[03:50] <linuxman410> whats problem CryptZombie
[03:50] <Firewall27> 	Where can I get support oficcial in real time?
[03:50] <Firewall27> :D
[03:50] <Firewall27> 	Where can I get support oficcial in real time?
[03:50] <doc|home> Firewall27: you've been told numerous times
[03:51] <dayo_> mindrape: thank u! :-)
[03:51] <doc|home> ok, maybe you haven't
[03:51] <CryptZombie> I installed Ubuntu 8.10 via desktop install when i reboot and select the Ubuntu install it says it cant find W:\ubuntu\winboot\wubildr but i booted back into vista and check it is there
[03:51] <kwak> hi, a newbie question. How do I change a hostname
[03:51] <Firewall27> I was told, but not in real time
[03:51] <Firewall27> I was told, but not in real time
[03:51] <doc|home> Firewall27: stop repeating
[03:51] <whacked>  i just searched Skype alsa pulseaudio on google came up with some good read
[03:51] <doc|home> whacked: cool, thanks
[03:52] <Firewall27> then hurts!
[03:52] <linuxman410> you are installing in windows
[03:52] <dayo_> kwak change it in /etc/hostname and /etc/hosts
[03:52] <rww> Firewall27: Ubuntu is a community-supported Operating System. It's expected that non-business users will use resources like this channel and Ubuntu Forums. For businesses, Canonical offers Service Level Agreements at http://www.canonical.com/services/support
[03:52] <kwak> ok. will try
[03:52] <CryptZombie> Am installing From windows yes
[03:52] <CryptZombie> then it asked me to reboot i did, then
[03:52] <rww> !hostname | kwak
[03:52] <CryptZombie> when i loaded it it said that it couldnt find that fine
[03:52] <CryptZombie> file
[03:53] <linuxman410> sorry i know nothing much about windows have not used in ten years
[03:53] <Shakedown> So anybody help me with the rsyncd.conf file?
[03:53] <CryptZombie> blah okie well am downloading 8.4 gonna retry with it
[03:53] <kwak> thanks y'all
[03:53] <whacked> http://ubuntuforums.org/showthread.php?t=789578
[03:54] <Fezzler> Anyone know how to enable a USB device (dsmeg or ls or fstab edit?)
[03:54] <whacked> doc|home have you seen this link above
[03:54] <doc|home> whacked: thanks for that, this should work too http://pulseaudio.org/wiki/PerfectSetup
[03:54] <doc|home> whacked: will try this one forst
[03:54] <doc|home> *first
[03:54] <clifford> hullo. I'm running ubuntu hardy 8.01 x64 and I cannot get vnc server to work for the world from and external ip address. all internals work fine and all ports are open. here is an output of my log http://pastebin.com/d47c5616d
[03:54] <doc|home> and then the other if that doesn't work
[03:54] <whacked> ok
[03:54] <ldlework> Why do I get this error in Ubuntu? : http://rafb.net/p/YeIfdw67.html
[03:55] <clifford> idlework: maybe it wasn't compressed right
[03:55] <clifford> idlework,: do you have a different download source?
[03:55] <CryptZombie> btw the boot demo was awsome cant wait to get this working ;)
[03:56] <Claire2009> does anyone know if youtube has an IRC tech help channel? found out cause of my youtube problems via their forums.
[03:57] <Claire2009> their custom video players are crashing on some vids
[03:57] <Claire2009> today
[03:57] <FelixZ> Hi all. A rookie question: which option of dpkg allows me to ignore any possible dependencies during install like what 'rpm -i -nodeps' does? It seems --ignore-depends require the name of a known package.
[03:57] <fromero691> i need some help executing this line /bin/ls -l /proc/bus/usb/*/*
[03:57] <cappicard> hey folks. my usb keyboard keeps saying "unable enumerate device..."
[03:58] <cappicard> this is intrepid... been givin me a big headache for a long t ime.
[03:58] <Claire2009> throws a million bucks into this IRC room
[03:58] <cappicard> i'm having to use windows with this damn keyboard
[03:58] <n2diy> Yesterday I up dated Hardy, rebooted etc... Today, my computer was running really slow, so I logged out, and when I logged back in, I had not tool bar or system tray!?  I created a desktop icon for Xterm, and did a shutdown -h, restarted, , logged in, and the bars are back! What happened?
[03:58] <Faust-C> hmm
[03:59] <fromero691> how do I execute this line /bin/ls -l /proc/bus/usb/*/*
[03:59] <cappicard> and yet it works just fine in my bios
[03:59] <Claire2009> #youtube
[04:00] <oholiab> fromero691: what's wrong with it?
[04:00] <fromero691> it says that I need to execute the line
[04:00] <oholiab> fromero691: open a terminal
[04:00] <oholiab> fromero691: type it in
[04:00] <oholiab> fromero691: press enter
[04:00] <fromero691> Add these lines to at the end of the start() function of /etc/init.d/mountdevsubfs.sh.
[04:00] <fromero691> Note that the udev permissions for the USB devices are still used. For instance, to access a USB disk you have to be member of the group disk. Execute /bin/ls -l /proc/bus/usb/*/*
[04:00] <fromero691> I tried but it said no such file
[04:00] <oholiab> OH
[04:00] <dhalsimm> hi, i made an sh script, it works but it didn't work from ubuntu's sessions. I changed its chmod 755, what else should I do?
[04:01] <fromero691> /bin/ls: cannot access /proc/bus/usb/*/*: No such file or directory
[04:02] <fromero691> I did type it in, and it just tells me cannot access
[04:02] <jigp> hello how to extra an .cue or .bin file?
[04:03] <fromero691> anyone here? ?
[04:03] <oholiab> fromero691: it's not there on my install either
[04:04] <fromero691> so is there something wrong with that line?
[04:04] <oholiab> fromero691: what instructions are you following?
[04:04] <fromero691> http://www.virtualbox.org/wiki/User_FAQ
[04:04] <fromero691> I got it from there
[04:04] <jclbrt> what does HAL stands for
[04:04] <dragon33> hardware abstraction layer
[04:04] <fromero691> it tells me to add some extra lines to the sh file
[04:05] <fromero691> and then it tells me that I have to execute the following line, which is what I cannot get to work
[04:05] <dragon33> maybe.. so many acronyms
[04:05] <Scubidus> Hey does anyone know if I can use packages from previous version of Ubuntu?
[04:05] <FelixZ> fromero691: Try /bin/ls -l /proc/bus/usb/*
[04:05] <fromero691> k
[04:05] <kuwago> fromero691 waht was the original question about VB?
[04:05] <fromero691> I am having trouble with my usb
[04:05] <fromero691> so I went to the website to get help
[04:06] <fromero691> and I cannot make it work
[04:06] <oholiab> fromero691: okay, if you scroll down about a third of the way down the page
[04:06] <fromero691> http://www.virtualbox.org/wiki/User_FAQ
[04:06] <emhs> Howdy folks.  I've got a bit of a problem.  I configured my friend's hp pavillion zv6000 for wireless using ndiswrapper under intrepid, and all of a sudden the wireless stopped working.  B44 appears to have loaded, and I need some help getting this sorted.
[04:06] <Scubidus> Can I use a package for dapper on hardy?
[04:06] <oholiab> fromero691: it appears to have ubuntu specific instructions on the abscence of /proc/bus/usb/*
[04:06] <emhs> Scubidus: Sometimes.  Depends on the package, what it depends on, and how its configured.
[04:07] <fromero691> I see
[04:07] <DasEi> !paste > Zuwer
[04:07] <fromero691> I just noticed it
[04:07] <kuwago> fromero691 what versionof VB and Ubuntu are you using?
[04:07] <Scubidus> emhs: this is what I would like to install http://packages.ubuntu.com/search?keywords=airsnort
[04:07] <enovativ> i am about to read and follow this link : https://help.ubuntu.com/community/Xen
[04:07] <xorlim> good morning. I am updating ubuntu. it complains about some utf8 strings (update-manager): Virhe rivillä 2 merkissä 40: Virheellinen UTF-8-koodattu teksti - epäkelpo "<b>acpi-support</b>
[04:07] <enovativ> to install Xen and use
[04:08] <enovativ> is this the more updated page ?
[04:08] <ubuntu_> mindrape  are you still here?
[04:08] <fromero691> I cannot see that section on the missing file
[04:08] <emhs> Scubidus: Any particular reason you need the dapper version?
[04:08] <fromero691> well I have ubuntu 8.10 and the latest VB
[04:09] <Scubidus> emhs: Cant find one for hardy
[04:09] <nyaa> is there a way to clear the cached ram you have?
[04:09] <xorlim> I have not used Debian since Sarge 3.1. I think Ubuntu is less stable.
[04:09] <oholiab> fromero691: it's under "Linux Hosts"
[04:09] <fromero691> okay yeah Im getting the file now
[04:10] <DasEi> ﻿nyaa:why that ? it's done automatic
[04:10] <kuwago> did you unmount the USB first before using it in vb
[04:10] <thermod> http://paste.ubuntu.com/107209/
[04:10] <doc|home> whacked: thanks, it's working now. The first link was good enough.
[04:10] <emhs> Scubidus: http://ubuntuforums.org/showthread.php?t=820488
[04:10] <fromero691> just got the file and got this error Error: Conflicts with the installed package "virtualbox-ose"
[04:10] <Enissay> I'm using conky with compiz, to launch it i'm using a bash script wich not working, it just contains : sleep 90 && conky -c /usr/share/conkyforecast/example/conkyrc;.......   what's wrong with it?
[04:11] <nyaa> DasEi I put things into /dev/shm to speed up an application, but it won't take them out of it even if I remove them or delete them, so then it goes from ram to swap with a ton of cached memory
[04:11] <emhs> Scubidus: That or get the src, and ./configure, make, sudo make install.
[04:11] <fromero691> no I did not do that
[04:11] <n2diy> Yesterday I up dated Hardy, rebooted etc... Today, my computer was running really slow, so I logged out, and when I logged back in, I had not tool bar or system tray!?  I created a desktop icon for Xterm, and did a shutdown -h, restarted, , logged in, and the bars are back! What happened?
[04:11] <fromero691> I just started the VB and then mounted it
[04:11] <Amerikaner> hey guys, would very much appreciate some help, i just tried installing 8.10 but it freezes before login
[04:11] <Scubidus> ehms: Thanks I'll check it out and get back to ya
[04:11] <xorlim> how do I make my error messages English as contrasted to Finnish?
[04:12] <emhs> Anyone have some experience with wireless on an HP Pavillion zv6000 that they'd like to share?  I got it working under ndiswrapper originally, but now it's stopped all of a sudden.
[04:13] <nyaa> DasEi I tried using sync; echo 3 > /proc/sys/vm/drop_caches but that was not allowed, it seems to be the big thing people suggest for this =(
[04:13] <SeMi> Can someone here help me out?
[04:13] <fromero691> also how do I transfer files between ubuntu and the VB???
[04:13] <Amerikaner> anyone got an idea why 8.10 would freeze before login?
[04:13] <Ent[R]opy> I installed ubuntu server edition on virtual box. Everything is up and running, but when i go to 127.0.0.1 in a browser in the host OS, then i the website on the webserver doesn't load. I'm probably doing it wrong right? When accessing a webserver in Virtualbox typing 127.0.0.1 in a webbrowser won't do right?
[04:13] <emhs> SeMi: Ask your question and we'll find out.  We won't know until we know what you neeed help with.
[04:14] <Ward1983> if i setup noip2 it ends up with a config file woth 0.0.0.0
[04:14] <Ward1983> ........
[04:14]  * Ward1983 is annoyed
[04:14] <scunizi> Ent[R]opy, only in the webbrowser of the vm you have the server in.. otherwise it will be the IP of the vm port 80
[04:14] <enovativ> is this link : https://help.ubuntu.com/community/Xen the lastest in one wanted to learn Xen ?
[04:14]  * Faust-C is still trying to make router 
[04:14] <emhs> Amerikaner: Lots of reasons.  Try forcing a startup in single-user mode.  Get lots of text output.  See what's going on.
[04:15] <SeMi> Just wondering... if I dualboot Ubuntu with XP will I need an alternate set of drivers like I had to do with Windows?
[04:15] <Shakedown> How do I fix this: "rsync: failed to connect to <ip address>: Connection refused (111)"?
[04:15] <Ent[R]opy> scunizi, aha ok. How do i find out the ip of the vm though?
[04:15] <Amerikaner> can you tell me how to do that?
[04:15] <linuxman410> Amerikaner have you tested your memory i had same problem while back bad mem chip
[04:15] <ubuntu_> i am having a problem with a root hard drive that is too full   i cannot access anything on it to delete ot move files  can anyone help  pls?
[04:15] <Shakedown> How can I see if a daemon is running?
[04:15] <Amerikaner> yeah linuxman, the memory was fine after the test plus i just had xp on it and it was fine
[04:15] <scunizi> Ent[R]opy, in the vm at a terminal prompt perhaps ipconfig or ifconfig.. I forgot..
[04:16] <ubuntu_> i have had to use the live cd to get back online
[04:16] <ubuntu_> how can i access my hardrives to fix this problem
[04:17] <Labud> is there someway i can access them thru a terminal?
[04:17] <Ward1983> is anyone using noip2?
[04:17] <unomi> Ward i am
[04:17] <Scubidus> ehms: No Luck
[04:18] <mindrape> Labud: you can mount the filesystem from your livecd
[04:18] <Ward1983> unomi, my config only contains 0.0.0.0 if i set it up, so it wont work
[04:18] <mindrape> Labud - fdisk -l            mount /dev/sda1 /mnt/OHMAN
[04:18] <Labud> ok  ty mindrape  how wud i do this?
[04:18] <unomi> Ward1983: whats your question?
[04:18] <unomi> hmm
[04:18] <mindrape> you may have to mkdir /mnt/OHMAN
[04:18] <Shakedown> Anybody help me with setting up rsync server?
[04:18] <mindrape> then from there you can rm files to make space.
[04:18] <Ward1983> unomi, why does the config only ocntain 0.0.0.0 if it asked me my login, password, hostname, etc
[04:19] <mindrape> Shakedown  -  www.lmgtfy.com/?q=ubuntu+rsync+server+setup
[04:19] <Labud> ok   mindrape ty  iwasn't sure if i cud speak with you again  ty   for help
[04:19] <Shakedown> There's not much on google, already tried
[04:19] <Shakedown> I've got some specific questions
[04:20] <Ent[R]opy> scunizi, i obtained the ip like you said, but it doesn't seem to work.
[04:20] <mindrape> Shakedown: what is it you wanna do specifically?
[04:20] <unomi> Ward1983: dunno :)
[04:20] <ning> 耳机没声音怎么弄？
[04:20] <unomi> worked out of the box for me
[04:20] <Dexi> Can anyone help me with eggdrop setup? it launches, but it doesnt sign onto a server and I cant telnet to it
[04:21] <Ward1983> unomi, yours is not empty?
[04:21] <mindrape> Dexi #eggdrop ?
[04:21] <Dexi> nobody there
[04:21] <Dexi> oh
[04:21] <Mal3ko> hi guys..i have one question. how do we execute something using another user acc?
[04:21] <Dexi> you were for a second
[04:21] <mindrape> Dexi - did you setup eggdrop.conf?
[04:21] <unomi> Ward my /var/lib/noip2/noip2.conf is binary
[04:21] <n2diy> Yesterday I up dated Hardy, rebooted etc... Today, my computer was running really slow, so I logged out, and when I logged back in, I had not tool bar or system tray!?  I created a desktop icon for Xterm, and did a shutdown -h, restarted, , logged in, and the bars are back! What happened?
[04:21] <scunizi> Ent[R]opy, from outside the vm in a browser  (Firefox) type 192.168.<whatever>:80  .... the :80 at the end is important
[04:21] <Ward1983> unomi, could you pastebin it (without your user, pass and hostname offcourse)?
[04:21] <fromero691> hi guys I need some help resolving this issue "Error: Conflicts with the installed package "vitualbox-ose"
[04:21] <unomi> ward, its a binary file
[04:21] <Dexi> mindrape: yes, and checked it a million times... id hate to force you to look over the pastebin of it...
[04:21] <mindrape> Dexi - there is lots of online docs for eggdrop... it probably has logged onto a server and is waiting for you to talk to it via /msg  eggdrop communicates via IRC protocol, not telnet.
[04:21] <Ward1983> unomi, it uses a config
[04:21] <mindrape> Dexi - pastebin away.  :)
[04:22] <Ent[R]opy> scunizi, i did, but that did not work either. I'll try again, just to make sure.
[04:22] <dibblego> why isn't there a feisty directory in any of the ubuntu repositories? e.g. http://jp.archive.ubuntu.com/ubuntu/dists/
[04:22] <kinja-sheep> n2diy: My guess -- Gnome didn't ran at that time.
[04:22] <unomi> Ward1983: where is your config?
[04:22] <kinja-sheep> n2diy: Neverless.  It's all good.
[04:22] <Dexi> mindrape: http://pastebin.com/m2ddd3e34
[04:22] <xorlim> n2diy: it is an old Linux problem that sometimes the system tray does not appear, the same problem is with old KDE and perhaps some newish GNOME. You can basically launch the systray with some such command as "systray" or some else.
[04:22] <okra> Hi, just installed intrepid ibex.. having some issues with my pci sound card: http://www.pastebin.ca/1313135 xine and gstreamer also report they can't load any drivers.
[04:23] <Ward1983> unomi, /var/lib/noip2/noip2.conf
[04:23] <unomi> Using configuration from /var/lib/noip2/noip2.conf   but that file is a binary file
[04:23] <Ward1983> unomi, aaaaaaaah ok now i get it
[04:23] <mindrape> Dexi - when you spawn the process it probably fails cause your hostname doesnt exist.... check the eggdrop.log for failures.  Also, did you log onto that IRC network and /whois the eggdrop bot?
[04:23] <unomi> you shouldnt set anything in that yourself
[04:23] <mindrape> Dexi - if you think the name might have been taken when it logged on you can /who hostname-of-the-bot
[04:23] <Ward1983> unomi, so it jsut doesnt work then because its setup right
[04:23] <xorlim> n2diy: the system tray is basically a process just like any other process in the system. numerous things can go wrong with it so that it doesn't start automatically. then you either reboot the system (like you did) or launch the process manually (like I did 1 or 2 times in KDE).
[04:24] <Dexi> mindrape: second part, yeah nickname doesnt exist
[04:24] <Ward1983> unomi, no NAT support?
[04:24] <Ent[R]opy> No luck. Didn't work. Hmmm.
[04:24] <unomi> use the noip2 program give it the information on the command line and it will write to conf
[04:24] <okra> http://www.pastebin.ca/1313136 <-- Appears the modules are loaded for it too, so I'm not sure what the problem is.
[04:24] <unomi> Ward1983: not yet :( I put it down to my router acting up though
[04:25] <Dexi> mindrape: i have 7 or 8 of these in the log: [17:57] * TERMINATE SIGNAL -- SIGNING OFF
[04:25] <mindrape> Dexi - I'd recommend strace.        sudo apt-get install strace
[04:25] <xorlim> n2diy: basically you want to find out the name of every process that does something to your desktop. if you know the name of the process, then you know the name of the binary or script used to start the process.
[04:25] <mindrape> then strace ./eggdrop or however you launch it.
[04:25] <Ward1983> unomi, then no-ip is useless to me :( i have NAT (like allmost anyone these days)
[04:25] <mindrape> then it will show you at a system level whats going on and maybe be easier to troubleshoot.
[04:25] <__lucio__> hi. does anyone know how i can plug two mice into ubuntu and dont have X grab them both? (just use my regular mouse to move the pointer, read from the other mouse with python-usb)
[04:25] <mindrape> I imagine it's probably a network config issue though.
[04:25] <Dexi> ok
[04:25] <Ward1983> any good alternatives to dyndns / no-ip ?
[04:25] <cappicard> ok. this is extremely irritating... i cannot use my usb keyboard under 2.6.27...
[04:25] <Dexi> mindrape: ill try that
[04:26] <ubuntu> i just installed pidgin 2.5.4.. why is ubuntu tryna tell me it's better if i use the older one? anyone have problems with the new one yet?
[04:26] <Flynsarmy> Is there a way to move bookmarks up and down in nautilus/Places menu in menu bar?
[04:26] <mindrape> Ward1983: get a dedicated host w DNS so you can edit A records at your whim?
[04:27] <Dexi> mindrape: that pumped out a whole bunch of stuff i dont understand
[04:27] <okra> Anyone had similar problems/fixes?
[04:27] <mindrape> Dexi  :)  Look at the last command before it dies...
[04:27] <xorlim> /quit
[04:27] <mindrape> Dexi - you can pastebin it all if you want.
[04:27] <mindrape> Dexi - sudo apt-get install pastebinit               strace eggdrop | pastebinit
[04:28] <Dexi> k well i cant get it all
[04:28] <Dexi> oh ok
[04:28] <vegombrei> is there any similar software to TED (torrent episode downloader) for ubuntu ?
[04:28] <Labud> mindrape:  i am getting a msg when i do "fdisk -l            mount /dev/sda1 /mnt/OHMAN"   it says  "last_lba(): I don't know how to handle files with mode 40755"
[04:28] <enovativ> is there a way to "scroll up" on irssi ?
[04:29] <spill> does anyone know a way to force sudo to ask for the root password instead of user password?
[04:29] <mindrape> on ph... hld
[04:29] <vegombrei> is there any similar software to TED (torrent episode downloader) for ubuntu ? this friend of mine has this software for windows caled TED .. it automatically downloads the shows he watches and the following episodes as they air ... is there a similar app in ubuntu ?
[04:29] <|dthacker|> hello,  I had a power supply crash, so I moved my hard drive to another machine.  How can I rerun the network detection and configuration to pick up the changes in the network card?
[04:30] <Ward1983> mindrape, i'm unemployed, not rich
[04:30] <Dexi> mindrape: where do i get the pastebin link?
[04:31] <vigo> http://paste.ubuntu.com/<<pastebin
[04:31] <n2diy> !Pastebin
[04:31] <Dexi> noo not that
[04:31] <vigo> oh,ok
[04:31] <Dexi> i used pastebinit but i didnt get an output of a specific link
[04:31] <spill> ?
[04:32] <vegombrei> is there any similar software to TED (torrent episode downloader) for ubuntu ? this friend of mine has this software for windows caled TED .. it automatically downloads the shows he watches and the following episodes as they air ... is there a similar app in ubuntu ?
[04:32] <spill> does anyone know a way to force sudo to ask for the root password instead of user password?
[04:32] <vegombrei> how do i search torrent downloading software for ubuntu ? is there a list of all the software available for downloading torrents ?
[04:32] <vigo> vegombrie: WINE?
[04:33] <vegombrei> vigo: whats wine ?
[04:33] <vigo> !wine
[04:33] <rdw200169> spill: kinda pointless
[04:33] <sloopy> vegombrei, search in synaptic
[04:33] <TQuid> Hi folks.
[04:33] <Labud> mindrape  it created to folder OHMAN   so what do i do know?
[04:33] <kuwago_> vegombrei get Deluge for torrent downloading
[04:33] <Labud> what do i do now/
[04:34] <mindrape> cd OHMAN
[04:34] <vegombrei> kuwago_: does deluge download all episodes as they air accordint to the ones one watches ?
[04:34] <phpmonk> how to configure 'mail' to send and receive POP and SMTP mails?
[04:35] <TQuid> I'm having a terribly frustrating time getting VLC to record a video stream with audio. I've tried /dev/audio[0-3] to no good effect, and /dev/dsp1 seems to work in terms of playback, but doesn't record to a file. I know the device is playing with Linux, as it works fine for audio and video on Skype. Any thoughts on finding out what device to use in VLC?
[04:35] <vegombrei> kuwago_: im tellin ya bro ... google and check out ted .. torrent episode downloader ...
[04:35] <spill> well, I'm running 8.10 64 and using dansguardian configured with tinyproxy and firehol.  What I really need to do is keep dans guardian from being shutdown with sudo from any user.
[04:35] <TQuid> lsusb shows this:
[04:35] <TQuid> Bus 004 Device 003: ID 046d:0990 Logitech, Inc. QuickCam Pro 9000
[04:35] <rdw200169> spill: then remove the users you don't want using sudo from the admin group
[04:35] <TQuid> spill, are you giving full sudo rights?
[04:35] <Labud> mindrape:  ok am ther now
[04:35] <Labud> there
[04:36] <rdw200169> spill: check the sudo documentation, you can edit the configuration for sudo using visudo
[04:36] <TQuid> Generally you want to limit users who need sudo to very specific applications.
[04:36] <kuwago_> vegombrei yes!
[04:36] <Dexi> mindrape: i think this is the problem: http://pastebin.com/d5108b06f
[04:36] <rdw200169> spill: the default is that all users in the admin group have full sudo privileges
[04:36] <rdw200169> spill: remove them from that group, resolve the problem
[04:37] <spill> ok, i think i'm getting ya.
[04:37] <CryptZombie> well think ive figured out my problem its gonna have to wait till tomrow when i can get a blank cd though ;) thanks guys cu l8tr
[04:37] <TQuid> Unfortunately sudo's config is documented with that horrid Backus-Naur notation. Precise, but damned hard to read.
[04:37] <vigo> One admin?sudo, the rest are on non-sudo accounts,
[04:37] <Labud> mindrape   do i do the fdisk -l   now?
[04:37] <spill> the only negative is that all sudo fuctions will be unavaible when I truly just need to lockout dansguardian? any other thoughts.
[04:38] <rdw200169> spill: consequentially, you will also learn that you can give very finite rights to users as far as 'root' access is concerned, for example, you can give a specific user the ability to access a particular program as 'root' using sudo, and nothing else
[04:38] <TQuid> spill, sudo *might* allow you to give a negative permission but then someone can just do "sudo bash" and do as they like.
[04:38] <Flynsarmy> Is there a way to move bookmarks up and down in nautilus/Places menu in menu bar?
[04:38] <nyaa> spill: you can use the su function to switch users
[04:38] <rdw200169> !sudo | spill
[04:38] <vigo> spill: set the timeout for su ?
[04:38] <nyaa> spill for instance if you have an account named nyaa that HAS sudo function, you can use su nyaa and then it will ask for a password
[04:39] <phpmonk> any text based client to access pop and smtp mail?
[04:39] <TQuid> phpmonk, mutt is the classic for that.
[04:39] <Labud> mindrape   i am getting a "cannot open /dev/hda1
[04:39] <grinn> how do i make a shortcut to a folder that's on the windows partition of my hard drive?
[04:39] <nyaa> then you have the same priviledges that that account has
[04:39] <spill> right but su is super user and it asks for root password right? not the user password as sudo asks for.
[04:39] <TQuid> spill, as yourself you just do "sudo su <user>"
[04:39] <nyaa> spill: no su stands for either substitute user or switch user, if you use no arguments it assumes root
[04:39] <TQuid> That lets you test their privileges, i think is what is being suggested.
[04:40] <phpmonk> TQuid: thx, i will try that
[04:40] <spill> oh, ok.
[04:40] <sloopy> grinn, ln -s dest folder
[04:40] <nyaa> spill: but if you have other accounts ont he computer, you can do su accountname and you can become that account as far as priviledges
[04:40] <grinn> how do i pull up a command prompt?
[04:40] <vigo> su is kinda non-available in Ubuntu, is wise, that is why sudo is used
[04:40] <nyaa> unless you do sudo su and then you can be root
[04:40] <nyaa> lol
[04:40] <Labud> mindrape: am i doing something inncorrectly?
[04:41] <rdw200169> spill: more info on using visudo to your advantage, http://www.gratisoft.us/sudo/man/sudoers.html
[04:41] <TQuid> Any thoughts on my audio-capture quandary? is there a different channel that specializes in that kind of thing?
[04:41] <spill> while, so I where can I find a how to on editing the suoders file then.  My goal would be to only allow root to shut down dansguardian and for all other users it would run by default but they couldnt shut it down.
[04:41] <TQuid> Documenting sudoers using Backus-Naur is like teaching people HTML with a raw LaTeX doc.
[04:42] <grinn> sloopy: i'm not quite sure what you mean
[04:42] <sloopy> grinn, ln is link and it is similar to alias...
[04:42] <vigo> spill: that would be in terminal:
[04:43] <Labud> mindraape:  it appears that the hardrive is not mounted
[04:43] <Ent[R]opy> I've figured out how to connect to the ubuntu server webroot from a host OS to the Ubuntu Server guast OS in Virtualbox. One has to change a setting in Virtualbox. A network setting has to be changed from "NAT" to "host interface". Then if you do "ifconfig" in the vm it will show the same ip as your host's ip. Connecting to that ip will make the server work.
[04:43] <vigo> spill: I forgot the commands, but is startup <whatever> <whoever> booted
[04:44] <rdw200169> spill: visudo edits the sudoers file
[04:45] <vigo> Thank you rdw
[04:45] <cattlesnake> Helloou everyone.
[04:45] <chris78v> i am getting error trying to run a game. what is the deal with directx????
[04:45] <chris78v> ﻿i am getting error trying to run a game. what is the deal with directx????
[04:45] <Mimi> Hey all, anyone know of a dock that I can put on the side of the screen (left or right)? Something with awn-like functionality? Been looking for ages! Thanks!
[04:46] <dunas> chris78v, it was built for Windows, this is not Windows. （｀ー´）
[04:46] <rdw200169> spill: just don't be careless when making changes to the sudoers file
[04:46] <hdiowhdioawdawgw> snoopy
[04:46] <rdw200169> spill: you can lock yourself out permanently without the root account enabled
[04:46] <spill> I hear ya.  I'm a bit freaked to try at the moment :).
[04:47] <Labud> is there anyone else that can help me with this disk too full problem?
[04:47] <chris78v> dunas, so the game cannot be ran? is there a patch?
[04:47] <dunas> chris78v, what game?
[04:47] <vigo> spill: what rdw200169 just said was make a backup before editing that stuff,,sorta
[04:47] <Jaffarkelshac> occasionally i would close a window, (nautilus or firefox) my screen flickers a bit and desktop effects is disabled. is this a known issue or just me, and how do i stop it
[04:47] <spill> it would seem as though there would a another way to lock someone out of shutting down dansguardian without the root password which I have enabled.
[04:47] <grinn> sloopy: you're gonna have to somewhat spoonfeed me the commands, i'm completely new at opensource
[04:47] <spill> sorry I'm still a bit of a newb yet. :(
[04:48] <cattlesnake> Anyone aware of how to connect to a linksys wireless router from ubuntu?
[04:48] <cattlesnake> This has been the brunt of my passed few hours.
[04:48] <rdw200169> spill: instead of concerning yourself with what you *don't* want to let your users do, instead, consider what you will *allow* them to do
[04:48] <cattlesnake> I have tried every combination of ndiswrapper.
[04:48] <chris78v> dunas. it is called, "civilizationIV"
[04:48] <vigo> No apologies needed when asking for help, that is actually wisdom.
[04:49] <rdw200169> spill: this is a much safer policy
[04:49] <dunas> chris78v, you are using wine? Check winehq.
[04:49] <n8tuser> cattlesnake -> what is the chip used on your client wifi card?
[04:49] <rdw200169> spill: this prevents the 'sudo bash' previously mentioned
[04:49] <razaccour> are there any hacking software applications for Ubuntu?
[04:49] <rdw200169> spill: they shouldn't need to run very many things as root
[04:49] <cattlesnake> Is that the Chipset?
[04:50] <cattlesnake> I too am new to Ubuntu.
[04:50] <Labud> Partition table entries are not in disk order
[04:50] <Labud> last_lba(): I don't know how to handle files with mode 40755
[04:50] <rdw200169> razaccour: they're called tcpdump and nmap...
[04:50] <cattlesnake> A few hours new.
[04:50] <Mimi> cattlesnake, go on firefox, and type this on the adress bar: 192.168.1.1  . I THINK you must be connected by a cable, not by wireless
[04:50] <Labud> can anyone tell me what this means
[04:50] <razaccour> which one is best?
[04:50] <Jaffarkelshac> did you mean penetration test for wireless? razaccour
[04:50] <sloopy> grinn, it isnt opensource, its unix (or unix-like) the command is 'ln' with a option of -s (which soft link) and then destination filename and then what you want it pointed to
[04:50] <razaccour> no
[04:50] <cattlesnake> Well, I am on a cable now, so that is fine.
[04:51] <rdw200169> razaccour: regardless of the ethical considerations of what you're implying that you want to do, i'm going to assume that you have only good intentions
[04:51] <razaccour> people are threatening to hack my website so i'm gonna get them out of the way before they get me
[04:51] <chris78v> ﻿dunas, the game is called, "civilization IV"
[04:51] <spill> ok, while I'm looking at the sudoes file now and I'm a little foggy on what I'm supossed to change in it.  doesnt the first account created also have admin rights in ubuntu?
[04:51] <rdw200169> razaccour: ah, ok
[04:51] <razaccour> i'm protecting site members, so there's good in it
[04:51] <cattlesnake> Mimi, where do I find the chip here (if that's what I am looking for)?
[04:51] <cosmicharade> Can anyone help me with a DVD read error I'm having?
[04:51] <rdw200169> razaccour: the best way to detect hacking attempts is by implementing LOG targets in an iptables firewall
[04:52] <cosmicharade> None of my video programs can read these discs..
[04:52] <zhanglei> how can i change my screen refresh rate?
[04:52] <grinn> sloopy: i have been in college 5 years now and that sentence baffles me more than anything my professors have said to me
[04:52] <rdw200169> razaccour: that, or running a intrusion detection software, like snort
[04:52] <razaccour> i need to intrude someone's site before they do it to me
[04:53] <razaccour> its a .webs site
[04:53] <vigo> razaccour: hacking is the writing of programs, or making programs work better, you are talking about cracking, cracking is malicious  and not really like by many people that I know of.
[04:53] <rdw200169> razaccour: i don't know about .webs, and i'm not going to help you do that!
[04:53] <Mimi> cattlesnake, Oh :O I thought you needed to connect to the router, to configure it, not just to go online :( I'm sorry
[04:53] <cosmicharade> Need help getting my comp to read DVDs
[04:53] <hdiowhdioawdawgw> Hello all. I have a question:  I opened up a folder containing hundreds of pictures, all arranged as "date modified". But my image viewer only knows how to navigate (using left and right button) by "name". This creates a minor annoyance for me b/c the navigation via "image viewer" doesn't match how the pictures are arranged in the folder. Does anyone know how to solve this problem (perhaps download a new, better image viewer that
[04:53] <hdiowhdioawdawgw>  FOLLOWS the arragement type as set up in folder)?
[04:53] <razaccour> is there any cracking software?
[04:54] <n8tuser> razaccour -> yes one of them is called an editor like vim
[04:54] <razaccour> thanks
[04:54] <atom^x> hdiowhdioawdawgw: try picasa
[04:54] <sloopy> grinn, sorry still waiting for my professorship ;')   maybe an example will help
[04:54] <rdw200169> hdiowhdioawdawgw: gThumb Image Viewer will do that
[04:54] <cattlesnake> Mimi, sorry for the confusion, I'll reiterate: I have a Linksys WRT54G hooked up to this computer, and need to be able to access the internet it provides.
[04:54] <sloopy> grinn, can you open a terminal?
[04:55] <zhanglei> Wow so many questions! help me!please! changing my screen refresh rate
[04:55] <Mimi> Does anyone know a dock (llke awn) that I can put on the left or right of the screen? Cairo is waaaaaaaay too heavy and "cutey"
[04:55] <vigo> razaccour: one is called #$$%@, but I know nothing about that cause it is bad to mess with other peoples work.
[04:55] <Labud> i have to find a way to move files off my root hard drive   it is too full and my computer has stopped functioning.  the way Mindrape told me did not work   can anyone else help please?
[04:55] <n8tuser> cattlesnake -> you are already connected to the internet as of now
[04:55] <fallout> Need other programs Ubuntu can run scrambled/encrypted DVDs on
[04:56] <razaccour> vigo thats not a word
[04:56] <vigo> Ok
[04:56] <rabz> i cant get my logitech quickcam to run on aMSN. i have tried gspca source on the synaptic packages what should i do?
[04:56] <cattlesnake> n8tuser -> Yes, I am, on *this* computer.  This is a desktop.  My laptop has ubuntu on it
[04:56] <cattlesnake> and will not connect.
[04:56] <rdw200169> fallout: you're thinking of the library: libdvdcss
[04:56] <cattlesnake> It is mere inches away from said router.
[04:57] <razaccour> i'm looking for software that i can use to crack a website with
[04:57] <n8tuser> cattlesnake -> get another cat 5 cable and attached one end to your laptop and the other end to your linksys router
[04:57] <Mimi> cattlesnake, it really doesn't matter what router you've got, what you need to know is what your wireless card, or your ethernet card. to find out, you can type lshw -C network in the terminal
[04:57] <fallout> rdw200169: what do you mean
[04:57] <kash> is there something to sync settings between my desktop and laptop for GNOME in general?
[04:57] <kash> i have foxmarks for bookmarks, but i want more than that
[04:58] <grinn> sloopy: you mean like konsole?
[04:58] <sloopy> grinn, yes
[04:58] <grinn> sloopy: open
[04:58] <vigo> razzacour: you are looking ine the wrong place, This is the Ubuntu-Help channel, that is all I have to say on that matter.
[04:58] <blaq> hey guys/girls just a quick one. After the last update my metacity is segfaulting. Does anyone know where metacity keeps it's logs/configuration files?
[04:58] <cattlesnake> n8tuser, thanks, but I'd rather not.
[04:59] <razaccour> someone from another website is causing me trouble and i need hacker software to take them down. can anyone help?
[04:59] <rdw200169> fallout: sudo apt-get install ubuntu-restricted-extras
[04:59] <Dexi> mindrape: are you familiar with bmotion
[04:59] <slavsun> does anyone work with Tacacs+ server (tac-plus package)
[04:59] <slavsun> ?
[04:59] <rdw200169> fallout: this gets you the good stuff for viewing 'encrypted' dvd's
[04:59] <rabz> i cant get my logitech quickcam to run on aMSN. i have tried gspca source on the synaptic packages what should i do?
[05:00] <n8tuser> cattlesnake -> you'd rather not? why ask her for help?
[05:00] <n8tuser> cattlesnake -> you'd rather not? why ask here* for help?
[05:00] <rdw200169> fallout: so all the standard dvd playing applications (totem, mplayer, etc...) will work *after* you install the restricted extras
[05:00] <nightrid3r> razaccour: even if you have the tools your probably to stupid to use them
[05:00] <razaccour> i can learn
[05:00] <cattlesnake> n8tuser, I'd rather not have a cable running from my laptop to the cable.  I'd like to extend my laptop's use outside the living room.
[05:00] <rcscomp> I have set all my files in ~ to let me read/write only.  However, I need a few configuration files to be read by root (b/c of suid).  What is the best way to do that?
[05:00] <n8tuser> cattlesnake -> get a longer cable?
[05:01] <grinn> sloopy: now what?
[05:01] <cattlesnake> n8tuser, from here-on-in it's turtles all the down.
[05:01] <rdw200169> cattlesnake: what are you trying to do again?
[05:01] <nightrid3r> cattlesnake: you need the cable to try and get your wifi card working
[05:01] <Mimi> cattlesnake, I understand, I hate using a cable too :) We got wireless cards for a reason! :)
[05:01] <ic3fr0g> hello.. i have a problem i have add/installed a GDM theme and, my pc open normaly it dont ask me for user: pass: any help please? im using Ubuntu Gnome 8.10
[05:02] <sloopy> grinn, i am at work so my responses will be slow at times...
[05:02] <n8tuser> am just waiting for cattlesnake to mention his wireless... hehe
[05:02] <grinn> sloopy: no problem, sorry to bother you
[05:02] <nightrid3r> n8tuser: me to :)
[05:02] <cattlesnake> n8tuser, you are both a hoot and a holler.
[05:03] <sloopy> grinn, tis not a bother, i just have high lag at times...
[05:03] <blaq> does anyone know where metacity keeps its logs? It segfaults on login and wont even let me get to the desktop
[05:03] <iNtERrUpT> hi all
[05:03] <n8tuser> cattlesnake -> we're having a lil fun yeah?
[05:03] <Vantrax> blaq does it work in tty
[05:04] <Mimi> ic3fr0g, do you *want* to be asked for a password? (I'm confused by your question, sorry :)
[05:04] <Mimi> Why are ubuntu forums so slow lately?
[05:04] <blaq> Vantrax, well i kill X via ctrl-alt-bksp and switch to terminal 1 and try a startx but because X has restarted itself already it says I've already got one running
[05:04] <corinth> Will kubuntu-desktop grab KDE 3 or 4 in Intrepid?
[05:04] <blaq> i'm running in fluxbox now
[05:05] <ravenor_> corinth: Doesn't Kubuntu 8.10 come with KDE4?
[05:05] <atom^x> corinth: kde4 i think
[05:05] <Mimi> corinth, I think (too lazy to look it up now) it's 3, but if you do all the updates, you'll get 4
[05:05] <blaq> all dmesg gives me is: metacity[7447]: segfault at 0 ip 080abab3 sp bfde6fc0 error 4 in metacity
[05:05] <ic3fr0g> mimi: yes i want be asked for password.
[05:06] <ibuffy> i just did "apt-get install ubuntu-desktop" rebooted and gdm won't respond to my keyboard or mouse, i luckily can use the other tty screens... help please
[05:06] <sloopy> grinn, still there?
[05:06] <blaq> i think it has something to do with the latest security updates that came through, as it was working fine before i had to restart due to the updates
[05:06] <vigo> Mimi: cause Ubuntu ROX! I am at 0.2s lag,,so I dunno
[05:06] <grinn> sloopy: yes, sir
[05:06] <spill> anyone know an easy way to keep dansguardian from being shutdown with sudo, and force it to be done with the root password and not the user password as done with the sudo command?
[05:06] <sockets> KDE vs GNOME (as far as speed, stability and features), anyone?
[05:07] <ic3fr0g> hello.. i have a problem i have add/installed a GDM theme and, my pc open normaly it dont ask me for pass: any help please? i want to ask for password.. im using Ubuntu Gnome 8.10
[05:07] <blaq> sockets: try them both, you decide
[05:07] <ibuffy> kde 3.5 ftw
[05:07] <blaq> sockets: that's an ongoing point of contention/rivalry amongst linux users
[05:07] <Mimi> ic3fr0g, OKay, then go to Adminitstration, Login Window. Then go to : Security: Make sure it doens't say "enable automatic login"
[05:07] <sockets> if i install both it won't slow down either while using it will it?
[05:07] <temppy> sockets: features is the main differentiating factor in that decision
[05:07] <sloopy> grinn,  ok 'ln -s destination_dir local_name_for_dest'
[05:07] <ravenor_> sockets: I've heard some people dont like KDE4. I believe Kubuntu 8.04 would include KDE3 though
[05:07] <vigo> sockets: thye both have there good sides...
[05:07] <blaq> nah sockets, it will only use one at any time, so you can judge based off that
[05:07] <rabz> i cant get my logitech quickcam to run on aMSN. i have tried gspca source on the synaptic packages what should i do?
[05:08] <ic3fr0g> Mimi: thanks
[05:08] <Mimi> ic3fr0g,  should work :)
[05:08] <ibuffy> temppy, i just installed ubuntu-desktop because kde4+ seems too slow
[05:08] <blaq> sockets: kde is more like windows, but by default ubuntu uses gnome
[05:08] <ibuffy> but i can't access gnome because it doesn't respond to my mouse or keyboard....
[05:08] <grinn> sloopy: so i need the address on the system of the folder?
[05:08] <sloopy> so to make a alias of your flash drive in your local directory you would type 'ln -s /media/flash_device_name ~/myflashdrive'
[05:08] <ravenor_> How's xfce for you guys?
[05:08] <sockets> thanks guys :], ibuffy - i heard 8.04 is more stable, you should check that out.. i made the mistake of getting 8.10 first and it was giving me a few issues too
[05:08] <ibuffy> ravenor_: fast
[05:09] <Lo-si> hi
[05:09] <n8tuser> spill -> think about it carefully, who belongs to sudoers? what can sudoers do?  should anyone else be a member of the group that owns dansguardian ?
[05:09] <sloopy> ravenor_, i use xfce on my router
[05:09] <ibuffy> ravenor_: slow compared to xmonad :)
[05:09] <temppy> ibuffy: do you have the evdev driver installed?
[05:09] <blaq> does anyone know where metacity keeps its logs?
[05:09] <grinn> sloopy: i think i get it ... lemme take a quick try
[05:09] <Lo-si> Can anyone help me with a kubuntu problem?
[05:09] <ibuffy> temppy: i'll check..
[05:09] <sockets> ibuffy, i've had 8.04 for about 5 days now with gnome, haven't tried kde but it's running a lot better than 8.10 was
[05:09] <sloopy> grinn, yes you need the directory path to the directory
[05:10] <Mimi> sockets,  by better, do you mean faster? if that's the case, I think i know what your problem was. "tracker". It slows down your pc, and unfortunately, its enabled by default on ibex. Disabling it works :D
[05:10] <Lo-si> I installed kvm and can not figure out how to turn it on so win4lin will use it
[05:10] <vigo> 8.10 was too complex for me, so I reverted to 8.04
[05:10] <spill> while, I truly only need the root to have access to shut it down.?
[05:10] <ibuffy> temppy: where is this 'evdev' driver you speak of?
[05:11] <spill> the other logins would need access to install packadges through sudo.
[05:11] <n8tuser> spill -> did you digest what i asked?
[05:11] <Mimi> Lo-si,  why dont you go ahead and ask? Maybe we can. If we can't, you can try on #kubuntu
[05:11] <spill> not really :)
[05:11] <n8tuser> !who | spill
[05:11] <n8tuser> spill read my questions again, and ponder on it a bit
[05:11] <cattlesnake> Mimi, okay, I took a bit here,
[05:12] <cmatheson> i'm writing a utility that needs to start up on /dev/tty1 on bootup.  is there a way to make init spawn my program w/ STDIN/STDOUT/STDERR set appropriately?  or should i just open /dev/tty1 and read/write to that?
[05:12] <new_to_ubuntu-> does Ubuntu Interpid Ibex 8.10 Desktop version include Samba?
[05:12] <ravenor_> Anybody know why Compiz enables the system boop by default?
[05:12] <cattlesnake> but so I typed lshw -C network
[05:12] <spill> ok, sorry, ubottu
[05:12] <spill> n8tuser: ok.
[05:12] <nyaa> what do the tty's allow you to do?  if you have 3 tty's can you press 3 buttons at once or do they serve a different function?
[05:12] <nightrid3r> new_to_ubuntu-: you can install it useing synaptic
[05:13] <temppy> !info xserver-xorg-input-evdev | ibuffy
[05:13] <Mimi> cattlesnake,  did it say what wireless card you've got?
[05:13] <new_to_ubuntu-> nightrid3r: guide me please if u don't mind, i'm so new :)
[05:14] <n8tuser> cmatheson -> you know those 3 fd are opened by default right? so now you like to perhaps use dup  to redirect?
[05:14] <spill> n8tuser: at present everone belongs to sudoers if i'm reading the file right?
[05:14] <grinn> sloopy: i typed 'ln -s /windows/Documents and Setting/Chris - Troll of Jom ~/My Documents
[05:14] <n8tuser> spill -> nope not everyone
[05:14] <cattlesnake> I can't tell, exactly, to be perfectly honest.  Is that the controller or the interface?
[05:14] <new_to_ubuntu-> currently, i'm downloading samba-latest.tar.gz from samba homepage
[05:14] <JohninLex> I have a simple question I hope, can thunderbird be set to receive mail from more than one email account
[05:14] <nightrid3r> new_to_ubuntu-: system --> management --> synaptic
[05:14] <Pandemic187> My Internet connection is sooo slow and I can't figure out why. Someone tell me what's wrong!
[05:15] <atom^x> JohninLex: yes it can
[05:15] <n8tuser> Pandemic187 -> did you pay for high speed access or low speed access?
[05:15] <spill> n8tuser: while, I guess I don't know what I'm looking for then?
[05:15] <ChrisGibbs> new_to_ubuntu-: Do you need the latest and greatest?? Samba4 breaks certain compatibilites with Samba3 and print server functions
[05:15] <rabz> i cant get my logitech quickcam to run on aMSN. i have tried gspca source on the synaptic packages what should i do? is there something else in the synaptic packages i need to install?
[05:15] <sloopy> grinn, ouch, those spaces are bad... you need to put '\ ' at each
[05:15] <cmatheson> n8tuser: oh shoot, forgot about dup.  thanks!
[05:15] <n8tuser> spill -> aparently not, kindly do a tutorial on file permissions and group permissions
[05:15] <JohninLex> thank you atom, sorry I was reading something that said it could not but I thought it could
[05:15] <Pandemic187> n8tuser: No, it's broadband. It should be decently fast but it's not. The thing is that I'm in college and it's fine on my roommate's laptop, but not on mine.
[05:16] <sloopy> grinn, and its ~/Documents
[05:16] <blaq> Pandemic187: Sorry my ESP is a little off today. Why don't you tell us more about your internet connection, what sort is it, what you're using, what you've tried etc
[05:16] <nightrid3r> ChrisGibbs: he doesn't even know how to install software so i doubt he needs samba4
[05:16] <spill> n8tuser: sure thing.
[05:16] <n8tuser> Pandemic187 -> you been messing with your roomates gf, he put a hex on you..lol
[05:16] <new_to_ubuntu-> ChrisGibbs: i need Samba, the most stable one
[05:16] <grinn> sloopy: instead of a space?
[05:16] <ChrisGibbs> nightrid3r: Ah, only just joined :)
[05:16] <Pandemic187> lol n8tuser.
[05:16] <rebel_kid> can i log in as another user via terminal?
[05:16] <Lo-si> anyone know how to turn on kvm so win4lin can run in hardware virtualization instead of software?
[05:16] <n8tuser> Pandemic187 -> well what do you consider slow?
[05:16] <Mimi> cattlesnake, this is mine: http://paste.ubuntu.com/107221/ see where it says Intel Wireless? It lists the model.  You could paste what you got, and we can tell you
[05:16] <Pandemic187> n8tuser: 97kbps downstream.
[05:16] <nightrid3r> new_to_ubuntu-: samba 3
[05:16] <blaq> Pandemic187: usually colleges have wifi/ethernet. You're using broadband? Explain more please
[05:16] <sloopy> grinn, yes, 'do\ space\ like\ this\ in\ the\ terminal'
[05:17] <Pandemic187> blaq: What would you like to know?
[05:17] <blaq> what sort of broadband
[05:17] <blaq> do you plug into the wall?
[05:17] <DasEi> ﻿ rebel_kid: yes , login <username>
[05:17] <blaq> is the wall socket a network socket or a phone socket?
[05:17] <n8tuser> Pandemic187 -> what if the remote end dishing out towards you is slow? you can not do much about that..
[05:17] <nightrid3r> !samba | new_to_ubuntu-
[05:17] <blaq> do you use a modem?
[05:17] <sloopy> grinn, or you can type first 2-3 characters of directory name and hit 'tab'
[05:17] <ravenor_> How do you privately talk to the bot?
[05:17] <grinn> sloopy: even though the folder name is "My Documents"?
[05:17] <rebel_kid> DasEi, thats what i thought but i get No utmp entry.  You must exec "login" from the lowest level "sh"
[05:17] <cattlesnake> Mimi, I have nothing that says wireless interfact.
[05:18] <Pandemic187> n8tuser: But if what you are describing is true, wouldn't it be slow for my roommate as well?
[05:18] <DasEi> ﻿ravenor_ :  /query ubottu
[05:18] <sloopy> grinn, ahh no, if you named it My Documents then no, default is usually 'documents'
[05:18] <Pandemic187> blaq: Wi-Fi and ethernet...but terribly slow.
[05:18] <Pandemic187> I mean both*
[05:18] <sloopy> grinn, err 'Documents'
[05:18] <cattlesnake> Mimi, I have network UNCLAIMED, network, and network DISABLED.
[05:18] <Mimi> cattlesnake, oops
[05:18] <n8tuser> Pandemic187 -> is it same site? so having multiple access to that remote site maybe putting on a priority basis ?
[05:18] <blaq> so you're plugged into the wall AND using wifi at the same time? or both of them are slow for you?
[05:18] <DasEi> ﻿rebel_kid:you tried from remote ?
[05:19] <Pandemic187> n8tuser: Is what the same site? I ran speed tests in the same room.
[05:19] <rebel_kid> DasEi, no im on the machine. just apps -> terminal -> login <username>
[05:19] <n8tuser> Pandemic187 -> its also possible your school is putting a cap on your accesses?
[05:19] <blaq> jump into a terminal and give me the output for ifconfig privately
[05:19] <Mimi> cattlesnake,  I don't know what to do from now, but maybe this could be usefull: http://ubuntuforums.org/showthread.php?t=890772
[05:19] <blaq> we'll start from the bottom and work up
[05:19] <Pandemic187> n8tuser: Nah. I've been using it for about 2 & 1/2 years now. This is something else.
[05:20] <new_to_ubuntu-> so samba-latest.tar.gz is Samba4?
[05:20] <DasEi> ﻿rebel_kid:don't know then, just ried here and works
[05:20] <n8tuser> Pandemic187 -> any recent updates?
[05:20] <grinn> sloopy: what exactly is this supposed to do?
[05:20] <rebel_kid> DasEi, thats odd, i really dont want to logout everytime i need to access psql as postgres
[05:20] <Pandemic187> n8tuser: It's just as slow on Windows as it is on Linux, for the record.
[05:20] <nightrid3r> new_to_ubuntu-: forget tar.gz files, use the repos instread
[05:20] <n8tuser> Pandemic187 -> okay, are your nameserver functioning ?
[05:21] <sloopy> grinn, what? the tab? it will complete the dir name with the \ in the appropriate places
[05:21] <Pandemic187> n8tuser: Is that an IRC thing? I'm not sure what nameserver means.
[05:21] <new_to_ubuntu-> ok
[05:21] <blaq> does anyone know where metacity keeps its log files?
[05:22] <n8tuser> Pandemic187 -> nameservers is essential to your enjoyment of the internet
[05:22] <blaq> n8tuser, you're not helping
[05:22] <new_to_ubuntu-> next question, how to update the mozilla firefox?
[05:22] <blaq> nameservers wont make anything slow
[05:22] <n8tuser> Pandemic187 -> kindly google for that word, nameserver and get some explanation
[05:22] <blaq> it will either make dns resolve or not
[05:22] <Pandemic187> Alright then
[05:22] <n8tuser> blaq -> speak for yourself, you dont understand if nameservers are down how can you resolve?
[05:22] <ravenor_> new_to_ubuntu-, should be automatic. If you mean from 2 to 3...
[05:22] <nightrid3r> new_to_ubuntu-: synaptic
[05:23] <blaq> that would make it not work altogether, not slow it down
[05:23] <new_to_ubuntu-> i mean from 3.03 which i currently have, to 3.05 from firefox website
[05:23] <new_to_ubuntu-> nightrid3r: what's synaptic? :)
[05:23] <n8tuser> blaq sure it will, if the 1st one is dead, and has to wait to resolve, before it uses the second one..get it?
[05:23] <blaq> somehow he's connected to irc.freenode.net and i doubt he knew the ip address for freenode off the top of his head
[05:23] <Mimi> cattlesnake,  sorry if someone has already mentioned this, but, is this a fresh install of ubuntu? If so, have you checked for restricted drivers? System ->Administration->Hardware Drivers
[05:23] <new_to_ubuntu-> is the sudo method called synaptic ?
[05:24] <cattlesnake> This is a fresh install, yes.
[05:24] <disappearedng> Hey any1 here can recommend a Desktop search app that can crawl pdf and chm files? Google Desktop 's plugins are all exes and not applicable to the linux environemnt
[05:24] <cattlesnake> An hour fresh.
[05:24] <nightrid3r> new_to_ubuntu-: system --> management --> synaptic , a software management tool
[05:24] <nightrid3r> new_to_ubuntu-: firefox 3.0.5 is in there
[05:24] <grinn> sloopy: it say "ln: creating symbolic link `/home/grinn/My Dcouments': File exists" but i don't see anything
[05:24] <blaq> n8tuser, nameservers are listed as ip addresses. It's kinda hard to resolve a nameserver if you don't yet know the ip address of the nameserver
[05:24] <nightrid3r> !synaptic | new_to_ubuntu-
[05:24] <Pandemic187> n8tuser: So can you tell me how to check if my nameserver is functioning?
[05:25] <cattlesnake> Mimi, ATI/AMD proprietary FGLRX graphics driver is the only one I see.
[05:25] <blaq> Pandemic187, it is functioning. I'll guarantee it
[05:25] <disappearedng> Any Good Desktop search app to reccomend that allows plugin?
[05:25] <kernel> Hey ATI Grapich Card isn't good at linux?
[05:25] <n8tuser> blaq -> as an expriment, set your 1st  nameserver in your resolv.conf to something like 168.254.1.2  and the 2nd as your normal nameservers, see how much delay you get.. experiment and tell me
[05:26] <Pandemic187> blaq: okay then...this is just such a weird problem. I don't get it.
[05:26] <quiksilver> can anyone reccomend an outstanding book on linux?
[05:26] <yell0w> hey guys how do i c hange the default group ownner for mounted usb drives ?
[05:26] <new_to_ubuntu-> oh i see :)
[05:26] <sloopy> grinn, is the My Documents folder already exist?
[05:26] <quiksilver> ubuntu for that matter, i'm a new user and i'd love to learn all about linux/ubuntu
[05:26] <blaq> n8tuser, try not to be condescending. I'm a network admin for an isp, i know how nameservers work
[05:26] <new_to_ubuntu-> so no need to download source files?
[05:27] <nightrid3r> new_to_ubuntu-: indeed :)
[05:27] <nightrid3r> quicksilver_: ubuntu unleashed 2008 edition
[05:27] <n8tuser> blaq well since you are an admin for an ISP, you know if one nameserver can not resolve, how long would it has to delay before it switches to your secondary nameserver?
[05:27] <blaq> Pandemic187, the basic things that could affect your speeds (apart from general things that slow down your entire computer) are: MTU, NIC drivers, link stability
[05:27] <quiksilver> nobody knows an outstanding book on ubuntu?
[05:27] <new_to_ubuntu-> i see :) thanks a lot
[05:27] <quiksilver> nightrid3r: thanks
[05:27] <grinn> sloopy: yes
[05:28] <sloopy> grinn, it cant be the target of a link if it exists...
[05:28] <blaq> n8tuser, depends on the timeout of the connection, which would be on the order of 1-2 seconds before it realised the nameserver is down and switched to the other
[05:28] <mindrape> Pandemic187: if you are sharing a network connection w a roommate and his is fast and yours is slow I doubt DNS has anything to do w it.
[05:28] <grinn> sloopy: i'm trying to make a shortcut on my desktop to a folder that is on the windows partition of my hard drive without having to copy over the files
[05:28] <Pandemic187> blaq: When I'm on Windows, my Wi-Fi speed will be 54 mbps like it should be...then it goes to 48, then 36...then 24, then 18.
[05:29] <Pandemic187> When things are going smoothly, that doesn't happen.
[05:29] <blaq> Pandemic187, i'd say it's your wireless NIC then
[05:29] <mindrape> Pandemic187: its probably router configs... you by chance using a Linksys?
[05:29] <n8tuser> blaq -> but it continually hitting the first nameserver yes? so adding up 1-2 second every address resolution? it adds up yes?
[05:29] <Pandemic187> mindrape: No, I'm using a university connection.
[05:29] <Pandemic187> blaq: But my wired connection is equally bad, though.
[05:29] <sloopy> grinn, try it like this... 'ln -s /windows/etc... home/grinn/Desktop/Win_Documents
[05:29] <Mimi> cattlesnake,  I can't find any help online that seems relevant :( Sorry
[05:29] <cattlesnake> Mimi, I haven't been able to either.
[05:30] <blaq> what sort of authentication do you use for the network?
[05:30] <blaq> like, when you plug into the wall, how does the university know it's you and not your roommate?
[05:30] <quiksilver> n8tuser, what kind of system are you running?
[05:30] <n8tuser> quiksilver -> an amd k7, good enuff? and some wireless
[05:31] <quiksilver> you built your system?
[05:31] <e-frame> grinn: is your win partition listed in your fstab?
[05:31] <ibuffy> someone please help me to unfreeze gdm
[05:31] <mindrape> Pandemic187: well if you truly think its DNS then you can use nslookup and see if the nameserver is failing... I doubt it though.
[05:31] <n8tuser> quiksilver -> yes
[05:31] <quiksilver> Pandemic187: check you pm please
[05:31] <ibuffy> it doesn't respond to mouse or keyboard
[05:31] <ibuffy> what's the evdev which was mentioned?
[05:31] <blaq> n8tuser, I'm not going to talk to you anymore. You're being unnecessarily hostile and it's not helping to solve Pandemic187's problem
[05:32] <mindrape> hostile?
[05:32] <mindrape> lol
[05:32] <suji> which command is used to know the version of ubuntu in my system
[05:32] <n8tuser> blaq -> am not hostile to you eh? am pointing out the issues yes?
[05:32] <sheep> suji: lsb_release -a
[05:32] <mindrape> lsb_release -a
[05:32] <cattlesnake> blaq, n8tuser recommended I fix my wireless connection with a wire.
[05:32] <n8tuser> lol
[05:33] <nightrid3r> rofl
[05:33] <n8tuser> cattlesnake -> i was teasing you, and remember we were waiting for you to tell us about your wirless
[05:33] <cattlesnake> blaq, he did so as if a pedagogue as well with an infinite regression in logic.
[05:33] <cattlesnake> and then he called my mother fat.
[05:33] <n8tuser> lol
[05:33] <kernel> My Graphic card is Radeon HD 4850.. but in my ubuntu Compiz is doesn't use well..
[05:33] <mindrape> !ot
[05:33] <Pandemic187> oops...i left lol.
[05:33] <cattlesnake> So, is there anyone who can help me with this?
[05:34] <mindrape> Pandemix - man nslookup
[05:34] <cattlesnake> The resources online were fruitless.
[05:34] <mindrape> cattlesnake -whats the issue?
[05:34] <kernel> ATI......... : (
[05:34] <blaq> anyone have any idea where i can find some metacity developers around here?
[05:34] <cattlesnake> mindrape, I have a Gateway m-1617 laptop and am unable to connect to a Linksys Router.
[05:34] <n8tuser> mindrape -> he does not have long enuff cat5 .. am going to stop teasing now..hehe
[05:34] <mindrape> cattlesnake - wired or wireless?
[05:35] <mindrape> maybe we should resurrect the long cat meme for him to connect, n8tuser?
[05:35] <cattlesnake> mindrape - the router is attached to a desktop computer which has a cable modem.
[05:35] <kernel> cattlesnake // ifconfig
[05:35] <sloopy> grinn, and?
[05:35] <quiksilver> if im using ubuntu it doesnt matter if i buy mac or pc right?
[05:35] <mindrape> cable modem -> router -> other comp                    or          cable modem -> other comp -> router on 2nd nic?
[05:36] <cattlesnake> kernel -- what must you know?
[05:36] <sloopy> quiksilver, nope doesnt...
[05:36] <cattlesnake> mindrape - the first.
[05:36] <mindrape> k.  :)
[05:36] <mindrape> cattlesnake - and you want to connect via ethernet?
[05:36] <quiksilver> does linux utilize really powerful systems though>
[05:36] <cattlesnake> mindrape - no, I want to connect using my laptop via wireless.
[05:36] <nightrid3r> cattlesnake: if we ever figure out what wifi card you have .....
[05:36] <mindrape> cattlesnake - okay.            sudo lshw -C network             what kind of card and what driver is it using?
[05:37] <n8tuser> quiksilver -> powerful enuff, you have anything in mind that you want to compute intensively?
[05:37] <quiksilver> some 3d rendering possibly
[05:37] <quiksilver> im just wondering if its a waste to get the new corei7
[05:37] <quiksilver> i really plan on sticking with linux
[05:37] <cattlesnake> mindrape - I don't see a wireless network on here.
[05:38] <mindrape> cattlesnake: sudo iwconfig
[05:38] <n8tuser> quiksilver -> then you need a powerful 3-d capable video card, and hopefully has the drivers supported in ubuntu
[05:38] <mindrape> does it say no wireless extentions?
[05:38] <nightrid3r> n8tuser: 4 quadcore opterons and 32GB ram is enough to irc according to a mate :)
[05:38] <cattlesnake> It does not.
[05:38] <mindrape> cattlesnake: on lshw you may have to scroll up through the output... (shift + pgup)
[05:38] <mindrape> it does not?  so you see something that lists an Access point and ESSID?
[05:39] <quiksilver> who makes the best pc's?
[05:39] <gaintsura> I do
[05:39] <n8tuser> nightrid3r -> thats just still in my dreams, even though i saw on craigslist a dual opteron 275  1 unit rack mount for 125 bux, my mouth was watering
[05:39] <gaintsura> =P
[05:39] <sloopy> quiksilver, apple
[05:39] <mindrape> quiksilver: best is opinion based... even so, best based on what criteria?
[05:39] <cattlesnake> mindrape - I don't see those either.
[05:39] <mindrape> cattlesnake: how about you copy and paste the output to www.pastebin.com so we can see.
[05:39] <duhh_> brand newbie here
[05:40] <cattlesnake> mindrape - I can't because this laptop is not connected to the internet, I am on the desktop.
[05:40] <mindrape> cattlesnake - to make this move smoothly how about you pastebin the following output.         sudo lshw -C network           sudo iwconfig          sudo ifconfig                sudo lspci
[05:40] <Matr|x> hello
[05:40] <Matr|x> i need some help
[05:40] <grinn> sloopy: thanks for the help but i can barely keep my eyes open right now, good night and thank you, again
[05:41] <nightrid3r> cattlesnake: thats why we talked about the cable as a temp solution to solve your problem
[05:41] <n8tuser> cattlesnake -> you dont like my 1st suggestion of using a cat 5 cable to just try it out first eh? make sure everything is okay, then switch to wireless after?
[05:41] <ravenor_> Matr|x, around here, you just have to ask it.
[05:41] <transporter> can somebody help me with a diary software for hardy
[05:41] <Matr|x> thx
[05:41] <FelixZ> Hi, a rookie question: which option of dpkg allows me to ignore any possible dependencies during install like what 'rpm -i -nodeps' does? It seems --ignore-depends require the name of a known package.
[05:41] <Matr|x> i want to install Rdesktop
[05:41] <sloopy> grinn, ok
[05:41] <Matr|x> but i cant
[05:41] <cattlesnake> Okay.  I have to disconnect this first.
[05:41] <hacknperl> I am looking for a software suite(preferable web based so i can access from my truck anywhere on a laptop) that is pretty simple for small businesses... it needs to do invoicing(main thing) and service call scheduling(bonus) and manage customers and estimates.  I have found several open sources projects such as OpenCRM, nolaPro, vtiger and they are all way too complicated.  Does anyone know of anything that is much simpler?
[05:41] <cattlesnake> Back shortly.
[05:42] <vigo> I am going to lie down, prolly sleep also,,,thank you kindly for all the assistance  and help,,,,,
[05:42] <n8tuser> FelixZ -> we dont remember all the options, kindly man  dpkg
[05:42] <Matr|x> eny body hel[
[05:42] <Matr|x> p
[05:42] <Matr|x> im new here
[05:42] <transporter> can somebody help me to find a diary software for hardy
[05:42] <Matr|x> help needed
[05:42] <nightrid3r> Matr|x: ask your question
[05:43] <Matr|x> rdesktop
[05:43] <Matr|x> give me errors
[05:43] <FelixZ> n8tuser: Thank you for the hint, I actually did that but could not find the answer.
[05:43] <eseven73> transporter: zim
[05:43] <Matr|x> when i give command .. ./configure
[05:43] <cattlesnake> mindrape & nt8user -- said laptop is without appropriate orifice.
[05:43] <PUNISHER> hi
[05:43] <mefisto__> I have kubuntu installed. if I install ubuntu-desktop, what does that do to the sound system under kde? will I have kde working with pulseaudio? or is it not that straightforward?
[05:43] <mindrape> cattlesnake: lspci
[05:44] <transporter> eseven73 will it allow me to write in my daily thoughts and feelings
[05:44] <nightrid3r> FelixZ: why you would want to ignore dependencies
[05:44] <Matr|x> hey
[05:44] <Matr|x> i need help
[05:44] <Matr|x> :O
[05:44] <sheep> Matr|x: you need to be more clear about what you need help with
[05:44] <eseven73> transporter: also KDE has a million really nice Journal and personal info managment apps
[05:44] <cattlesnake>  mindrape -- I meant that I am unable to attach the cable to the laptop.
[05:44] <PUNISHER> who needs help?))
[05:44] <Matr|x> me
[05:44] <Matr|x> :)
[05:44] <Matr|x> punisher
[05:44] <eseven73> transporter: zim is a desktop wiki you can write anything
[05:45] <Matr|x> can i pvt u
[05:45] <nightrid3r> Matr|x: try sudo apt-get install rdesktop
[05:45] <mindrape> cattlesnake: well i am on the same page as n8tuser.... we cant help you if we dont know what card you have
[05:45] <ravenor_> What kind of trouble am I going to get into trying to swap out Gnome for Xfce?
[05:45] <eseven73> transporter: basKet also comes to mind...
[05:45] <PUNISHER> Matr|x: okay, let's try to fix it
[05:45] <FelixZ> nightrid3r: I'm developing a software suit that in some case requires to install multiple versions of it.
[05:45] <eseven73> BasKet is a OneNote clone kinda sorta...
[05:45] <Ahadiel> ravenor_, Shouldn't be any.
[05:46] <ravenor_> Ahadiel, What you're saying is that... aside from resetting everything graphical, its... automatic?
[05:46] <transporter> eseven73 i have basket
[05:46] <FelixZ> nightrid3r: From what I can find only the rpm based way is provided.
[05:46] <eseven73> transporter: personally I use Emacs for Journal stuff, with the org-mode
[05:46] <transporter> eseven73: i don't want anything like basket
[05:47] <Ahadiel> ravenor_, Before remove gnome, you might want to try out xfce first. sudo apt-get install xubuntu-desktop
[05:47] <Ahadiel> ravenor_, Then select "xfce" under "Sessions" at the login screen.
[05:47] <eseven73> hmm transporter try searching apt for 'journal' or 'diary' see what pops up :)
[05:47] <FelixZ> nightrid3r: ...so I'm just curious there's a counterpart to rpm --nodeps in dpkg.
[05:47] <nightrid3r> FelixZ: i have no idea
[05:47] <cattlesnake> mindrape -- I just ran hardware testing, this is what it says: Marvell Technology Group Ltd. Device 2a08 (rev 03) .... and then .... Realtek Semiconductor Co., Ltd. TTL8101E/RTL8102E .... and then... PCI Express Fast Ethernet controller (rev 01) ....  are any of these the aforementioned card?
[05:48] <ravenor_> Ahadiel, Hmm. So both desktops are intsalled at once... and I could switch between the two whenver?
[05:48] <transporter> eseven73: i need something that would allow me to write down my personal daily thoughts and feelings
[05:48] <fromero691> hi guys im having trouble trying to execute this file  virtualbox-2.1_2.1.0-41146_Ubuntu_intrepid_i386.deb
[05:48] <Ahadiel> ravenor_, yeah
[05:48] <transporter> eseven73: that's all that i need
[05:48] <FelixZ> nightrid3r: Thank your for asking anyway, I'll keep exploring. :)
[05:48] <ravenor_> transporter, why not just use... gedit or something. Date each entry either in the file name or on a new line.
[05:48] <transporter> eseven73: i need something that can do that for me
[05:49] <fromero691> hi guys I need some help with executing this file  virtualbox-2.1_2.1.0-41146_Ubuntu_intrepid_i386.deb
[05:49] <McShane> anyone ever have a problem with their desktop showing flickering pixels/banding -- but only through DVI and not VGA? I've swapped my videocard, PSU, and even my mobo, and the problem persists
[05:49] <eseven73> transporter: kontact has a journal feature
[05:50] <sheep> fromero691: what happens when you double-click it?
[05:50] <eseven73> like i said KDE is LOADED with Note taking, journaling software, just have to look around :)
[05:50] <nightrid3r> cattlesnake: the marvel will probably be your wifi , a have one like that to, never managed to get it working under linux so i'll folow this to learn something
[05:50] <fromero691> sheep_it just opens up and show alot of files
[05:50] <sheep> fromero691: is ot on your desktop?
[05:50] <sheep> *it
[05:51] <xubuser> Hello People.
[05:51] <nightrid3r> fromero691: man dpkg
[05:51] <ic3fr0g> how i install php ?
[05:51] <transporter> eseven73: ok i have kontact i will try using that or maybe i will hunt for something else some other day for now
[05:51] <fromero691> its a tar file
[05:51] <transporter> eseven thanx for ur help
[05:51] <ic3fr0g> sudo apt-get install php   ... its not installing php..
[05:51] <eseven73> anytime
[05:51] <nightrid3r> ic3fr0g: sudo apt-get install php5
[05:52] <transporter> i have another problem i cannot access cairo clock
[05:52] <fromero691> nightrid3r_could you please be more specific on used linus for a week
[05:52] <sheep> ic3fr0g: sudo apt-get install php5
[05:52] <rshakin> hey is there a way to install qtopia
[05:52] <rshakin> desktop
[05:52] <nightrid3r> !dpkg
[05:52] <sheep> fromero691: he means open a terminal and type in man dpkg
[05:52] <fromero691> sheep_yes it's on my desktop and it is a tar file
[05:52] <fromero691> k
[05:52] <eseven73> transporter: ah i dont do eyecandy, who needs it? so you'll have to ask someone else about Cairo
[05:53] <sheep> fromero691: .deb is not a tar.  Run this in a terminal: sudo dpkg -l ~/Desktop/virtualbox-2.1_2.1.0-41146_Ubuntu_intrepid_i386.deb
[05:53] <xubuser> guys I use mke2fs on usb stick. but then mounting is requires sudo.
[05:53] <xubuser> is there a proper way?
[05:53] <xubuser> or better method?
[05:53] <transporter> eseven73: no problems i will thank you
[05:53] <fromero691> sheep_okay thank you
[05:53] <cattlesnake> nightrid3r - that's unfortunate, I'll have to abandon linux if this is the case.
[05:53] <eseven73> :)
[05:53] <sheep> ic3fr0g: you may also want to install libapache2-mod-php5 if you want to use php with apache
[05:54] <nightrid3r> cattlesnake: there are supported usb wifi sticks so there is always a solution
[05:54] <transporter> can somebody help me with cairo clock it fails to launch
[05:54] <cattlesnake> nightrid3r -- those look hella dorky.
[05:54] <omid8bimo> hi
[05:55] <n8tuser> cattlesnake -> have we ever find out your wifi chip you use on your laptop? internal or usb attached? pcmcia?
[05:55] <omid8bimo> i have a problem and i don't know what to do
[05:55] <nightrid3r> cattlesnake: or use ndiswrapper with windows drivers as a last
[05:55] <cattlesnake> n8tuser -- I believe we did, and it is a Marvell Topdog or Hotdog or something.
[05:55] <omid8bimo> i had ubuntu on partition sda2 and it's /boot in sda3
[05:55] <omid8bimo> sda1 was bsd
[05:55] <cattlesnake> nightrid3r -- I tried those, I tried it with every possible driver.
[05:55] <n8tuser> cattlesnake -> internal? pcmcia card you plug in? or usb you plug in?
[05:55] <omid8bimo> i removed the sd3 by mistabke now i can't boot into ubuntu
[05:56] <omid8bimo> how can i recreate ubuntu /boot?
[05:56] <cattlesnake> n8tuser -- it is a wireless card already inside of the laptop, not anything I plug in.
[05:56] <spree> Help, movie player will not seek or go to the next chapter
[05:56] <spree> it does play but that is all it does
[05:56] <n8tuser> cattlesnake -> was it turned on when you did   sudo lshw -C network?
[05:56] <spree> no rewind no fast forward i can't skip agead
[05:56] <spree> ahead
[05:57] <cattlesnake> n8tuser -- it was.
[05:57] <trisquel> hola
[05:57] <omid8bimo> anyone?
[05:57] <spree> this happens for every video i watch
[05:57] <trisquel> alguien h abla español?
[05:57] <Flannel> !es | trisquel
[05:57] <n8tuser> cattlesnake -> and what was the result?  post it in pastebin please
[05:57] <nightrid3r> !es | trisquel
[05:57] <spree> trisquel, busca por ##ubuntu-es
[05:57] <trisquel> genial, gracias
[05:57] <spree> de nada
[05:58] <n8tuser> spree -> curious, which player are you using to playback?
[05:58] <spree> Movie Player
[05:58] <spree> it didn't used to have this problem
[05:58] <eseven73> upgraded to 8.10 didnt you?
[05:59] <spree> of course
[05:59] <eseven73> haha
[05:59] <toki_> hey is anyone in here from the knoxville tn area
[05:59] <spree> you know, maybe ubuntu shouldn't advertize that you should upgrade if it causes all these problems
[05:59] <FelixZ> nightrid3r: It seems --force-depends would work, thanks for asking.
[05:59] <eseven73> that's OT toki_
[06:00] <cattlesnake> nt8user -- I can't specifically paste anything because the laptop isn't online and there is no port for the cable.
[06:00] <wfiuewfew> Hi! I am installing a wireless driver. I need to know the "linux kernel source include path". What is it?
[06:00] <eseven73> spree: not everyone is having issues with 8.10
[06:00] <toki_> its for a good reason im tired of trying to fix my machine and was wondering if anyone was in the area could help me
[06:00] <spree> eseven73, cutting to the chase, can you help me?
[06:00] <nightrid3r> cattlesnake: there should be, you have an ethernet controler which is for cable
[06:00] <fromero691> hi I am trying to install this Vm, vmware-server-distrib, it is just a folder with lots of folders and it is in my desktop
[06:01] <fromero691> hi I am trying to install this Vm, vmware-server-distrib, it is just a folder with lots of folders and it is in my desktop please help
[06:02] <spree> fromero691, #vmware
[06:02] <eseven73> spree: probably not , but have you tried other players?
[06:02] <nightrid3r> fromero691: sudo dpkg -i packagename.deb
[06:02] <Gerob> Hey all, having a problem with not being able to boot back into the GUI after installing the nVidia 1.77 drivers.  I have tried a few things but I think the xorg.conf file just isn't pointing to my PCI slot with my card.  What can i put in my xorg file to point it to PCI bus 01:00:0?
[06:02] <fromero691> thank you
[06:02] <spree> eseven73, I have, with some success and some failure. my vnc is jacked up too it actually freezes on me now
[06:02] <wfiuewfew> Hi! I am installing a wireless driver. I need to know the "linux kernel source include path". What is it?
[06:02] <spree> xine works ok for some things but not all things
[06:03] <omid8bimo> guys i removed my /boot partition by mistake now i can't boot into ubuntu, how can i re-create it?
[06:03] <spree> i am severely limited with my video now
[06:03] <nightrid3r> wfiuewfew: /usr/src
[06:03] <spree> what is the package name for Movie Player so i can reinstall it?
[06:03] <sockets> hey guys.. i just installed vbox (not ose).. downloaded and installed the .deb package, but how do i get a shortcut on my applications list? because it isn't there..
[06:04] <transporter> can somebody help me my cairo clock fails to launch and gives me a weird error msg in the terminal
[06:04] <eseven73> !info mplayer
[06:04] <fromero691> I tried to install with the following command :fromero69@ubuntu:~$ sudo dpkp -i vmware-server-distrib
[06:04] <fromero691> sudo: dpkp: command not found
[06:04] <fromero691> no result
[06:04] <spree> ok and what about vnc
[06:04] <spree> it's not just vnc
[06:04] <wfiuewfew> nightrid3r: Thanks! I have a problem with this, though. My card requires that I downgrade the kernel to 2.6.24---but linux--header--generic would not downgrade! How do I resolve this?
[06:04] <nightrid3r> fromero691: dpkg
[06:04] <eseven73> xtightvncserver is one
[06:05] <eseven73> spree: do apt-cache search VNC
[06:05] <fromero691> nightrid3r_it's not a .deb package, it's just a folder with more folders inside
[06:05] <spree> omg lol i didnt mean VNC i meant VLC
[06:05] <eseven73> lol
[06:05] <eseven73> its just 'vlc' i think
[06:05] <spree> i got it
[06:05] <spree> sorry :)
[06:06] <eseven73> np
[06:06] <transporter> hey can somebody help me my cairo clock fails to launch and gives me a weird error msg in the terminal
[06:06] <nightrid3r> fromero691: then i can't help you sorry
[06:06] <fromero691> nightrid3r any suggestions?
[06:06] <fromero691> I see
[06:06] <sockets> i just installed virtualbox (downloaded the .deb, not the ose).. but i can't find it, it says "reinstall package" but where is it?
[06:06] <eseven73> transporter: google the 'weird error message' :)
[06:06] <lavagolemking> I need a way to securely delete my files, from a hard drive being returned in maybe 12 hours.
[06:07] <omid8bimo> can someone guide me what to do?
[06:07] <fromero691> sockets_I have the same problem
[06:07] <spree> lavagolemking, first step is to not look at porn on the work computer
[06:07]  * lavagolemking laughs.
[06:07] <omid8bimo> guys i removed my /boot partition by mistake now i can't boot into ubuntu, how can i re-create it?
[06:07] <lavagolemking> It's a personal computer.
[06:07]  * omid8bimo sad
[06:07] <spree> lavagolemking, yes and you looked at porn on it
[06:08] <yfzr1> I have ubuntu 8.10 and looks like there is IRQ conflict - irq 17: nobody cared (try booting with the "irqpoll" option)
[06:08] <wfiuewfew> Any ideas about how to downgrade kernel-headers-generic after a kernel update. I need kernel-headers-2.6.24
[06:08] <quiksilver> what's a really good p2p client for ubuntu?
[06:08] <transporter> (cairo-clock:6753): librsvg-CRITICAL **: rsvg_handle_render_cairo_sub: assertion `handle != NULL' failed
[06:08] <lavagolemking> It just has a dying hard drive, and is being shipped back to dell. I have a series of saved passwords on it.
[06:08] <quiksilver> for music etc
[06:08] <eseven73> !MBR | omid8bimo (this might help)
[06:08] <spree> lavagolemking, do you want to wipe all data off of it?
[06:08] <eseven73> maybe that second link
[06:08] <useruseruseruser> lavagolemking: shred?
[06:09] <omid8bimo> ubottu: thanks dude, let me check it out
[06:09] <transporter> guess what eseven73 it does not come up in google even
[06:09] <eseven73> odd
[06:09] <lavagolemking> I don't know if the hard drive will survive dd, but shredding the directory tree of Thunderbird/Firefox/Pidgin/Gnome-Keyring should be sufficient.
[06:09] <sockets> fromero691, i figured it out
[06:09] <eseven73> can you pastebin the error transporter ?
[06:09] <spree> lavagolemking, DO NOT DO THIS IT WILL ERASE ALL DATA ON THE DRIVE sudo shred -vfz -n 0 /dev/xxx
[06:09] <sockets> you need to restart
[06:09] <spree> with /dev being the drive
[06:10] <spree> the xxx i mean
[06:10] <lavagolemking> What is ﻿-vfz -n ?
[06:10] <transporter> its just a short one eseven73 i don't think it would be necessary to pastebin it here have a look at it
[06:10] <transporter> (cairo-clock:6753): librsvg-CRITICAL **: rsvg_handle_render_cairo_sub: assertion `handle != NULL' failed
[06:10] <spree> lavagolemking, -verbose -force -zeroes i forgot what n does
[06:11] <toki_> ok guys so my computer is not reconizing my monitor (polaroid 32" 720p tv) any suggestions
[06:11] <fromero691> hi guys I just download VMserver for linux, and after nearly an hour of downloading I get a folder titled vmware-server-distrib, any idea on how to install it?
[06:11] <wfiuewfew> Any ideas about how to downgrade kernel-headers-generic after a kernel update. I need kernel-headers-2.6.24
[06:11] <lavagolemking> The trouble I'm having is getting it to take directories. I was going to give it zero, remove, and maybe count.
[06:11] <mysticdarkhack> hey all
[06:11] <yfzr1> hi
[06:11] <eseven73> transporter: try running it as root
[06:11] <spree> lavagolemking, in all truth Dell isn't going to check the drive anyway so just break it by dropping it on the ground a few times. i'm not even kidding at all. i'm a dell certified systems engineer
[06:12] <mysticdarkhack> Anyone own a sony vaio z and running ubuntu?
[06:12] <fromero691> hi guys I just download VMserver for linux, and after nearly an hour of downloading I get a folder titled vmware-server-distrib, any idea on how to install it?
[06:12] <transporter> eseven73 that would be way to dangerous then what?
[06:12] <spree> that certification is so easy to get its ridiculous but they do teach you about the dell warranty stuff
[06:12] <spree> got any idea how many hard drives they get a day? thousands
[06:12] <transporter> eseven73 how should i do that?
[06:12] <lavagolemking> I have the drive backed up, and don't mind losing everything, but I don't know if it will survive for a full dd or dban.
[06:13] <spree> lavagolemking, it doesn't have to.
[06:13] <wfiuewfew> Any ideas about how to downgrade kernel-headers-generic after a kernel update. I need kernel-headers-2.6.24
[06:13] <eseven73> I didnt say to always run it as root, but this forum suggest at least TRYING it. http://ubuntuforums.org/archive/index.php/t-553751.html
[06:13] <Gerob> Hey all, having a problem with not being able to boot back into the GUI after installing the nVidia 1.77 drivers.  I have tried a few things but I think the xorg.conf file just isn't pointing to my PCI slot with my card.  What can i put in my xorg file to point it to PCI bus 01:00:0?
[06:13] <spree> lavagolemking, they will give you a new drive rather than bug you about whether the drive is faulty. Your LCD screen is another matter however
[06:13] <fromero691> hi guys I just download VMserver for linux, and after nearly an hour of downloading I get a folder titled vmware-server-distrib, any idea on how to install it?
[06:13] <toki_> ok guys so my computer is not reconizing my monitor (polaroid 32" 720p tv) any suggestions
[06:14] <lavagolemking> I actually got that replaced twice, high-def.
[06:14] <spree> lavagolemking, if you knew my credentials i would have grabbed it out of your hands and broken it for you by now
[06:14] <transporter> eseven73: well it works if i run it as root
[06:14] <eseven73> :)
[06:14] <spree> lavagolemking, because i know dell doesn't care. go send that drive in busted.
[06:14] <spree> you know its busted when it is rattling.
[06:14] <spree> i wouldn't say this if it wasn't dell
[06:15] <fromero691> hi guys I just download VMserver for linux, and after nearly an hour of downloading I get a folder titled vmware-server-distrib, any idea on how to install it?
[06:15] <lavagolemking> They sometimes seem not to, but when I was looking at a motherboard once, the tech said they like to try to salvage and refurbish stuff.
[06:15] <eseven73> ok then it sounds as a permissions issue transporter ... I'm not exactly sure what you would need to achieve that since im not familiar with Cairo Clock. but now you know that i requires elevated privillages...
[06:15] <spree> lavagolemking, thats a motherboard. those are expensive.
[06:15] <lavagolemking> I just want to make sure the image is unreadable, in case they do that with my drive.
[06:15] <eseven73> i=it
[06:15] <spree> lavagolemking, hard drives are not. they get a warranty behind the scenes with the hard drive manufacturer
[06:16] <spree> lavagolemking, hard drives break by themselves all the time. Nobody is going to look at or care to look at your data
[06:16] <spree> lavagolemking, I have sufficiently answered your questions. Act.
[06:16] <wfiuewfew> Any ideas about how to downgrade kernel-headers-generic after a kernel update. I need kernel-headers-2.6.24
[06:17] <toki_> ok guys so my computer is not reconizing my monitor (polaroid 32" 720p tv) any suggestions
[06:18] <omid8bimo> i checked here https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows?action=show&redirect=RestoreGrub but it won't help. as far as i know the /boot it gone so as vmlinuz and the rest, how can i reinstall them?
[06:18] <lavagolemking> No, probably not, but I have (some) valuable passwords saved and want to make sure they are unrecoverable. I also don't want to risk voiding the warranty, which might happen if they see dents or the like on the drive.
[06:18] <Gerob> Hey all, having a problem with not being able to boot back into the GUI after installing the nVidia 1.77 drivers.  I have tried a few things but I think the xorg.conf file just isn't pointing to my PCI slot with my card.  What can i put in my xorg file to point it to PCI bus 01:00:0?
[06:19] <wfiuewfew> lavagolemking: try booting from cd and using shred
[06:19] <gonewestcoast> lavagolemking: Good lord, if the data's sensitive don't return the drive.
[06:19] <gonewestcoast> Just replace it, drives are dirt cheap nowadays.
[06:19] <fromero691> is this filed used to install programs vmware-install.pl??
[06:20] <transporter> can somebody help me with my cairo clock it launches successfully if i try to launch it as root but fails to launch as a normal single user
[06:20] <wfiuewfew> fromero691: use python vmware-install.pl
[06:20] <lavagolemking> It's being replaced under warranty already, and I think I can get everything.
[06:20] <wfiuewfew> Any ideas about how to downgrade kernel-headers-generic after a kernel update. I need kernel-headers-2.6.24
[06:20] <fromero691> wfiuewfew_could you please be more specific? I dont know what python is?
[06:21] <Brack10> Is the "Apple Garamond" font that comes preinstalled on Ubuntu a free font?
[06:21] <wfiuewfew> fromero691: Install python from synaptic
[06:21] <sheep> wfiuewfew: .pl is perl, .py is python
[06:21] <fromero691> okay once I install it, then what should I do?
[06:21] <AgentArmstrong> i need help with my display resolution
[06:21] <Slart> wfiuewfew: why not just install the kernel header package for 2.6.24? kernel-headers-generic is just a meta package afaik
[06:21] <AgentArmstrong> im on a ppc
[06:22] <Slart> Brack10: if it comes preinstalled then it most probably is
[06:22] <sheep> fromero691: it's perl, not python.  perl should be installed by default.  To run that file, do perl vmware-setup.pl
[06:22]  * AC`97 goes baaaah
[06:22] <transporter> can somebody help me my cairo clock launches succesffully if i launch it as root but fails to launch as a normal single user
[06:22]  * Cann0n goes baaaaah, too.
[06:22] <AC`97> :]
[06:23] <fromero691> wfiuewfew_there are so many python files, which one should  I install??
[06:23] <lavagolemking> Is there a shredder tool that can recursively clear directories, or will I have to run dd overnight?
[06:23] <gonewestcoast> transporter: What's the error when you try to launch it?
[06:23] <gonewestcoast> Pastebin, if you please.
[06:23] <sheep> fromero691: you should probably use vmware-install.pl
[06:23] <Slart> transporter: fails to load? you might want to explain a bit more.. the computer blows up? it launches then laughs at you and runs away?
[06:23] <wfiuewfew> fromero691: see above, sorry you need perl, not python --- fromero691: it's perl, not python.  perl should be installed by default.  To run that file, do perl vmware-setup.pl
[06:23] <Slart> lavagolemking: check out "wipe"
[06:23] <fromero691> sheep_yes but how do I use it?
[06:23] <transporter> gonewestcoast and Slart : (cairo-clock:6753): librsvg-CRITICAL **: rsvg_handle_render_cairo_sub: assertion `handle != NULL' failed
[06:24] <fromero691> sheep_im so lost here lol
[06:24] <sheep> fromero691: what folder is that file in?
[06:24] <transporter> Slart: i wish it did that so i could laugh also
[06:24] <fromero691> vmware-server-distrib
[06:24] <trancefat> Hi.. i accidentally dragged some item and all the title bars of all the windows vanished! now they wont come back... please help
[06:24] <fromero691> sheep_vmwre-server-distrib
[06:24] <gonewestcoast> transporter: https://subzero.elys.com/packages.php?do_Details=1&ID=11426&O=0&L=&C=&K=DaNiMoTh&SB=&SO=&PP=&do_MyPackages=&do_Orphans=&SeB=m
[06:25] <sheep> fromero691: vmware-server-distrib?  is it on your desktop?
[06:25] <Slart> transporter: lots of hits on google for that error message, have you checked if there are any solutions?
[06:25] <fromero691> sheep_yes it is in my desktop
[06:26] <transporter> Slart: im sorry for some reason when i copy pasted that error msg in well nothing came up
[06:26] <sheep> fromero691: do this in a terminal: cd ~/Desktop/vmware-server-distrib; perl ./vmware-setup.pl
[06:26] <transporter> gonewestcoast: what do i do now?
[06:26] <Slart> transporter: don't search for the whole thing.. just from librsvg-CRITICAL and forward
[06:27] <gonewestcoast> transporter: Learn to use google on that error message?  You're not the first to have this issue, see what they did to resolve it.
[06:27] <broomhandle> i hope someone can help: i have a desktop with xp, and a laptop dual booting xp and ubuntu, i don't have a router only a modem, and the net works fine on the desktop (which im on now) but when i unplug the ethernet and put it into the laptop ubuntu won't connect to the net, and if i boot in xp it says i need to renew the ip, but says it's unable to do so, i'd be grateful for any ideas
[06:27] <lavagolemking> Looks like I can hit directories with this, thanks.
[06:27] <fromero691> sheep_fromero69@ubuntu:~$ cd ~/Desktop/vmware-server-distrib; perl ./vmware-setup.pl
[06:27] <fromero691> Can't open perl script "./vmware-setup.pl": No such file or directory
[06:27] <fromero691> Sheep_any suggestions?
[06:27] <AgentArmstrong> who can help me with my display resolution problem?
[06:27] <homeskillet> why is getting my wireless internet to work with ubuntu so hard. i have a wpa2 set up? it finds my essid fine, it asks me for my passphrase, i give it it, then it doesnt connect and instead pops up something saying 'create default keyring'
[06:27] <Slart> !res | AgentArmstrong, you've read this?
[06:27] <wfiuewfew> Hi---I need help downgrading my kernel. I was able to do this by uninstalling some packages from synaptic. However in /usr/src the header remain from version 2.6.27. I need headers from version 2.6.24.
[06:27] <gonewestcoast> broomhandle: Most cheap cable modems only have one MAC resident at once, you'll have to power cycle it.
[06:27] <sheep> fromero691: what is the output of the command cwd?
[06:28] <broomhandle> gonewestcoast: powercycle the modem? before or after i connect it to the laptop?
[06:28] <fromero691> Sheep_I don't know how to answer that, what is cwd??
[06:28] <sheep> fromero691: it's a command.
[06:28] <transporter> gonewestcoast and Slart: well yes but im a bit dumb when it comes to linux troubleshooting u need to help me out just a tad bit
[06:28] <sheep> fromero691: to run it, type "cwd" (without quotes) in a terminal
[06:29] <coolpro> anyone uses shoutcast server?
[06:29] <Slart> transporter: what version of ubuntu are you running?
[06:29] <Gautam> hi, do we have any keyboard shortcut for viewing desktop...like in windows its cntl+d
[06:29] <transporter> Slart: hardy
[06:29] <Brack10> If I have xfce4 installed on Ubuntu, how can I start it from a command line?
[06:29] <Slart> transporter: how did you install the cairo clock?
[06:29] <transporter> Slart: repos
[06:30] <Slart> Brack10: I think startx should work
[06:30] <fromero691> sheep_fromero69@ubuntu:~$ cwd
[06:30] <fromero691> bash: cwd: command not found
[06:30] <mib_rvd89cnx> Gautam:  Its ctrl+alt+d
[06:30] <sheep> fromero691: oops.  I meant pwd
[06:30] <lavagolemking> Where is the keyring located, if you don't mind my asking? I want to get that too.
[06:30] <Brack10> Slart: no but I also have gnome installed
[06:31] <Brack10> Slart: I installed it on top of gnome for when I need a lightweight wm
[06:31] <Slart> Brack10: might be a setting in some file somewhere that startx reads what to run
[06:31] <fromero691> sheep_lol
[06:31] <Brack10> Slart: you mean xorg.conf?
[06:31] <Brack10> I want gnome to be my default wm, but when I'm doing virtualization I want to use xfce
[06:31] <fromero691> sheep_home/fromero69
[06:31] <Brack10> so I'd log out of gnome and start xfce
[06:31] <bruenig> gnome is not a window manager
[06:32] <Brack10> sorry
[06:32] <Brack10> what's the term?
[06:32] <sheep> fromero691: type this: cd Desktop/vmware-server-distrib
[06:32] <sheep> fromero691: then type this: perl ./vmware-install.pl
[06:32] <bruenig> gnome is a suite of applications often referred to as a desktop environment in which there is metacity which is a window manager
[06:32] <trancefat> Hi all, is there some way i can get my titlebars back... i dragged something and they vanished
[06:33] <Gautam> thanks
[06:33] <Brack10> ok desktop environment
[06:33] <fromero691> sheep_all in one line? or in two separate commands?
[06:33] <Brack10> so...possible?
[06:33] <mib_rvd89cnx> trancefat: ofcourse
[06:33] <Slart> Brack10: no, some other file.. I'm not sure what it's called
[06:34] <nickrud> trancefat, try  alt-f2  gtk-window-decorator --replace
[06:34] <sheep> fromero691: two separate commands
[06:34] <fromero691> sheep_it says to run this command as a super user
[06:34] <sheep> fromero691: try sudo ./vmware-install.pl
[06:34] <eseven73> Brack10: and for a lightweight wm you might want to try Icewm or fluxbox, XFCE has gained a few pounds as of late...
[06:35] <omid8bimo> okay my vmlinuz and initrd is removed from my /boot partition. how can i recreat them?
[06:35] <nickrud> Brack10, oh, xfce? ignore my advice
[06:35] <trancefat> nickrud: but will that change the theme??
[06:35] <fromero691> sheep_just did it started to install im still waiting
[06:35] <nickrud> omid8bimo, sudo apt-get install --reinstall linux-image-$(uname -r)
[06:35] <unomi> hi
[06:35] <Brack10> eseven73:  I don't need something super duper lightweight, but vmware running 2 windows 2008 server and a vista box is really demanding on my poor little computer
[06:35] <eseven73> One thing nice bout ubuntu there's 1500 window managers in the repos to play around with :)
[06:35] <nickrud> trancefat, that's for gnome/metacity/compiz
[06:36] <Brack10> eseven73: so how do I drop to CLI and launch another one? startx starts gnome of course
[06:36] <eseven73> i know the feeling Brack10 i got win xp running as we speak on vbox ose
[06:36] <omid8bimo> nickrud: thanks but where should run that? i can't boot into ubuntu
[06:36] <fromero691> sheep_you got it man, thank you so much for your help it's now installing
[06:36] <unomi> im having some serious problems on a dell optiplex sx280, I rebooted and when it came up very little was working, I had to reinsert my mouse and keyboard to get them to work
[06:37] <unomi> networking had to be enabled via ifconfig
[06:37] <nickrud> omid8bimo, oh, no boot? you can boot the live cd, mount the hard drive, chroot into it and then reinstall the kernel
[06:37] <eseven73> Brack10: i use Icewm and fluxbox when I have my win XP VM running which is like almost 90% of the time :)
[06:37] <unomi> the system was working fine, except a little sluggish, so i rebooted
[06:37] <omid8bimo> nickrud: okay got it. let me try, tanq
[06:37] <nickrud> omid8bimo, but I'm not sure how you got to this spot and what's really wrong with your system. Take my advice if it fits your situation
[06:38] <Brack10> eseven73: Ok if I use those instead of xfce will you tell me how to do it? :)
[06:38] <eseven73> Brack10: I can give you a few tips sure
[06:38] <Brack10> launch a separate wm from cli that is
[06:38] <nickrud> omid8bimo, don't use the linux-image-$(uname -r)
[06:38] <omid8bimo> nickrud: sure :)
[06:38] <unomi> when i rebooted, i also went and tried hyperthreading, which *might* be a cause, not sure.
[06:38] <__deuce__> can someone help me install a wireless patch?
[06:38] <unomi> when i discovered the state of the system i rebooted and turned off hyperthreading again
[06:38] <coolpro> anyone uses shoutcast?
[06:38] <Brack10> eseven73:  No I just need to know how to have gnome start with Ubnuntu, but have the ability to launch another window manager when needed from CLI
[06:39] <eseven73> Brack10: ive never done that before, I thought you meant from login
[06:39] <nickrud> omid8bimo, install linux-image-2.6.27-11-generic for the latest kernel
[06:39] <__deuce__> i keep getting "patch: **** Only garbage was found in the patch input"
[06:39] <Brack10> nah
[06:39] <Brack10> I know that' just an xorg.conf thing
[06:39] <omid8bimo> nickrud: okay
[06:39] <Brack10> because I use vmware to run my test servers for my MS certs
[06:40] <nickrud> omid8bimo, assuming intrepid  (/me rapidly tries to cover all the bases and his backside)
[06:40] <eseven73> Brack10: I just do ctrl Alt Backspace and switch that way
[06:40] <lavagolemking> Thank you all for your help. I think it's pretty good for a safe return.
[06:41] <unomi> also, up arrow now fires 'screenshot'
[06:41] <omid8bimo> nickrud: yes it is intrepid. the problem was i mistakely removed my /boot partition now i want to creat the /boot on the ubuntu / itself
[06:41] <ravenor_> Probably the wrong place to ask this... but has anybody taken OSX and put... something else on it? (Gnome/Xfce/KDE)?
[06:41] <nickrud> omid8bimo, ok, that should do it. you'll want to reinstall any video or other drivers you had, but do it after it boots correctly if possible
[06:42] <Brack10> I tried ctrl alt bkspace :)
[06:42] <Brack10> didn't work
[06:43] <Brack10> ok who was helping me with the switching wm thing?
[06:43] <quiksilver> how do   i get back to my windows installation
[06:43] <quiksilver> when i installed ubuntu, it auto boots to ubuntu
[06:43] <nickrud> omid8bimo, oh, you'll want to reinstall grub as well
[06:43] <homeskillet> woohoo i got wifi working
[06:44] <quiksilver> and when i press esc to go to the menu before it does, i only see ubuntu options
[06:44] <kinja-sheep> How do you ssh into machines on your local network without using ip-address?  (using domain name instead... that is).  What do I need to install?
[06:44] <Brack10> quiksilver: did you do the guided install, use whole hard drive?
[06:44] <homeskillet> dns?
[06:44] <quiksilver> i forget which one i did
[06:44] <quiksilver> i remember it showing windows 25%
[06:44] <omid8bimo> nickrud: i think too :)
[06:44] <cilabs> kinja-sheep: u need the ip addr, or need to set up a domain name server
[06:44] <quiksilver> ubuntu 75%
[06:44] <nickrud> kinja-sheep, add a reference in your /etc/hosts file, like     ip other-computer   where ip is the other computer's ip and other-computer is a name you want to reuse
[06:45] <nickrud> kinja-sheep, it'll start working as soon as you save the file
[06:45] <__deuce__> who here knows how to install driver patches? am having a bit of trouble
[06:45] <unomi> are there any issues where turning on hyperthreading on a system where hyperthreading was previously turned off may corrupt the system? ubuntu intrepid.
[06:45] <kinja-sheep> kinja-sheep + cilabs:  Thank.  I'm curious more about... setting up domain name server?
[06:46] <quiksilver> Brack10: is  windows gone?
[06:46] <Brack10> quiksilver: sounds like it may be gone
[06:46] <Brack10> quiksilver: how did you launch the install?
[06:46] <__deuce__> quicksilver: sounds like it
[06:46] <quiksilver> cd
[06:46] <Brack10> so you booted to cd from the bios?
[06:46] <quiksilver> correct
[06:46] <kinja-sheep> nickrud: That will work for a computer.  I'd like to be able to ssh in -- based on the connected machine (domain) rather than setting up because I find the IP address?
[06:47] <Brack10> quiksilver: and in the partitioning section you chose the default setting and ignored warnings?
[06:47] <quiksilver> i couldnt tell you
[06:47] <quiksilver> i kinda just guessed
[06:47] <nickrud> oh, outside network? or local?
[06:47] <Brack10> quiksilver: you probably killed windows then
[06:47] <quiksilver> i guess thats not a bad thing
[06:47] <jigp> hello how to extra .bin? (ubuntu desktop 8.04)
[06:47] <kinja-sheep> nickrud: Local.  I see what you mean by /etc/hosts.  There are few lines there (localhost + my name). :o
[06:48] <Brack10> quiksilver: you need to read the warnings, specially the one that says "YOU WILL LOSE ALL OF THE DATA ON YOUR HARD DRIVE IF YOU PROCEED"
[06:48] <conal> how can i set environment variables at login so that they'll be passed into processes i start from the desktop (rather than from a shell)?  i'm using .bashrc, which is conditionally loaded in .profile, but that trick isn't working for me.
[06:48] <cilabs> kinja-sheep: see https://help.ubuntu.com/8.10/serverguide/C/dns.html
[06:48] <quiksilver> Brack10: everything is backed up, i'll be fine
[06:48] <nickrud> kinja-sheep, yep. That's the reaaaaalllllllyyyyyy  old way to identify computers, back in the day every machine had every machine in the world in that list :)
[06:48] <albuntu> jigp: do you mean extract ?
[06:48] <Brack10> quiksilver: Oh ok you're good to go then
[06:48] <Brack10> quiksilver: you should stick with Ubuntu, Windows blows
[06:48] <jigp> albuntu : yeah extract
[06:48] <quiksilver> yes it does.
[06:49] <kinja-sheep> nickrud: Lol.  Heh.  Time changes. :)
[06:49] <Brack10> *this opinion does not necessarily reflect those of canoical inc*
[06:49] <Brack10> or however you spell it
[06:49] <nickrud> kinja-sheep, so you could do  ssh kinja@other-computer , if it's ip is identified in that file, as yours is.
[06:49] <albuntu> jigp: sudo ./nameofthefile.bin
[06:49] <kinja-sheep> cilabs: Thanks.  Will take a look.  This will only work on the computer with said "dns-related" packages installed?
[06:49] <__deuce__> what steps do I need to install a driver patch?
[06:50] <bruenig> __deuce__: what do you mean by driver patch
[06:50] <cilabs> kinja-sheep: no.  it'll work with all the sys's on the network who are identified to the server
[06:50] <kinja-sheep> nickrud: Or I could stick with what I usually do -- Create an alias. :)
[06:50] <Mimi> Hiiiii...anyone know of dock like AWN, but I can put on the left (or right?) of the screen? Besides Cario (ew ew ew)
[06:50] <nickrud> kinja-sheep, yep. But then, you can reference that machine by name for any purpose.   http://other-computer, for example.
[06:50] <__deuce__> i have a patch that will allow wifi injections, needs installed and am having probs
[06:50] <kinja-sheep> cilabs:  Thanks.  I get the idea (server).  I'll bookmark it.  I think it's what I'm looking for. ;)
[06:50] <nickrud> kinja-sheep, but it's only an option, one of many
[06:51] <__deuce__> i keep getting "patch: **** Only garbage was found in the patch input"
[06:51] <bruenig> __deuce__: what is this supposed to be patching
[06:51] <bruenig> a kernel module?
[06:52] <cilabs> kinja-sheep: yes, nickrud's right.  its a fairly detailed process, and there are other ways around it.  the server option's the one i know when the netowrk is farily large and moves/adds/changes need to be tracked in a central place
[06:52] <__deuce__> driver for my wireless card
[06:52] <bruenig> __deuce__: link to the driver
[06:52] <bruenig> or pastebin it
[06:53] <kinja-sheep> nickrud + cilabs: I'm in progress of installing 8.04 on my home machines.  I think it's more benefits for me in the long run.  And I wouldn't want to face some weird bugs eventually.  I like the simple thing.  Connect regardless of what ip it is... DNS thing.<_<
[06:53] <bruenig> __deuce__: I mean link to the patch
[06:53] <bruenig> patches patch files
[06:53] <__deuce__> bruenig: http://tinyshell.be/aircrackng/forum/index.php?topic=2898.0
[06:54] <jigp> albuntu : but its in the documents.how to go there?
[06:54] <nickrud> kinja-sheep, you still have to maintain the list. One place is convenient, but it's also easy to mess up. Something worth learning, though
[06:54] <SkytracK> anybody installed ubunta on a Asus eee box never used linux before so dont want to much hassle in setting it up advice needed thanks
[06:54] <__deuce__> bruenig: that is the driver, now that i reread it
[06:55] <nickrud> SkytracK, if someone's there, #ubuntu-eeepc is the place for advice
[06:55] <SkytracK> ok thanks
[06:56] <bruenig> __deuce__: yeah so you need to download the source of the iwl driver, patch it with whatever file you got, then compile it as a module
[06:56] <__deuce__> bruenig: http://linuxwireless.org/download/compat-wireless-2.6/ sorry about the last link, this is the direct one
[06:56] <__deuce__> how do i compile it?
[06:56] <albuntu> jigp: the bin file its an executable file and can not be extracted. you can execute it with this command : sudo ./home/snake/jigp/Documents/nameofthefile.bin if the name of your home folder is jigp
[06:56] <unomi> is there a way to restore my system to a previous state?
[06:56] <bruenig> oh it is all put together, the patched driver there?
[06:56] <bruenig> !compiling
[06:56] <unomi> can i see which updates have been applied chronologically?
[06:58] <nickrud> unomi, grep installed /var/log/dpkg.log , and zgrep installed /var/log/dpkg.log.*.gz
[06:58] <bruenig> you can't restore it to a previous state unless you have backups obviously, you can restore the packages you have installed to a previous state by simply removing the ones you have installed since that time and readding the ones you have deleted
[06:58] <bruenig> read the logs and have fun
[06:58] <ChrisGibbs> unomi: depends on how far back as well. Try /var/log/apt/ as well
[06:58] <bruenig> this is not the same as restoring the system though because you may have changed configurations, etc.
[06:58] <nickrud> unomi, as you can gather, ubuntu doesn't use 'restore points'
[06:59] <jigp> albutu :jigp@jigp:~$ /home/jigp/MichaelLearnsToRock 2008 CD(cd)/MichaelLearnsToRock 2008 CD(cd).bin
[06:59] <jigp> bash: syntax error near unexpected token `('
[06:59] <unomi> i think i might have installed something that was able to mess up my system
[06:59] <keppi> why would "force create mode" not work in samba?
[06:59] <bruenig> unomi: that is unlikely
[06:59] <nickrud> jigp, put the file name in quotes, because of the spaces
[06:59] <unomi> bruening then perhaps you can help me find out what is going on.
[06:59] <bruenig> unomi: describe
[06:59] <nickrud> jigp, and the parenthesis
[06:59] <jigp> nickrud : how?
[06:59] <unomi> net and HAL dont seem to start anymore
[07:00] <bruenig> unomi: by net you mean the networkmanager daemon?
[07:00] <unomi> i had to replug my keyboard and mouse after boot, had to run ifconfig and dhclient to get net
[07:00] <unomi> i mean networking capabilities
[07:00] <nickrud> jigp, like  bash "/home/jpig/Mi --- .bin"
[07:00] <keppi> noone knows samba in here?
[07:01] <bruenig> unomi: you obviously had network capabilities as you were able to use ifconfig and dhclient, any thing you are calling "network capabilities" are just front ends for those things anyhow
[07:01] <bruenig> unomi: so what front end is it that you are without
[07:01] <nickrud> jigp, if that fails, by some odd chance, place a \ before each space and parenthesis, like   2000\ 2008\ \(cd\).bin
[07:01] <__deuce__> thanks for the help bruenig
[07:01] <unomi> ifconfig showed only loopback
[07:02] <unomi> i had to bring eth0 up by hand
[07:02] <unomi> http://rafb.net/p/MQv5rP71.html
[07:02] <nickrud> keppi, seems like the samba people are absent; ask every 10 min or so and one will drop in soon, I'd guess
[07:02] <unomi> my dmesg
[07:02] <keppi> thanks nickrud
[07:02] <bruenig> unomi: so your problem is that eth0 wasn't brought up? or is there something more?
[07:03] <jigp> nickrud : sudo "./home/jigp/MichaelLearnsToRock 2008 CD(cd)/MichaelLearnsToRock 2008 CD(cd).bin"
[07:04] <jigp> command not found
[07:04] <unomi> my mouse and keyboard werent working, i think some other things are broken as well
[07:04] <bruenig> jigp: remove the leading .
[07:04] <unomi> getting gconf errors when starting gedit
[07:04] <unomi> http://rafb.net/p/P0GXQE59.html
[07:04] <bruenig> jigp: the . refers to the current directory you are in, so let us say you are in /home/jigp and run that command, what you are actually running is /home/jigp/home/jipg/MichaelLearns..." and so on
[07:04] <jigp> bruenig : command not found
[07:04] <nickrud> jigp, I didn't have a . in there :)  in this context,  the "." means current directory. Since there is no directory below / ....
[07:04] <unomi> also, up arrow fires 'screen shot'
[07:05] <SkytracK> nickrud guess i will have to go ahead with the install on my Asus eee box see what happens noone answering me in that channel may have to wait a little longer
[07:05] <jigp> nickrud : still not working :(
[07:05] <bruenig> jigp: ls -l that file and paste the otuput
[07:05] <bruenig> output*
[07:05] <bruenig> use tab completion if need be
[07:05] <nickrud> jigp, try home/jigp/MichaelLearnsToRock 2008\ CD\(cd\)/MichaelLearnsToRock\ 2008\ CD\(cd\).bin
[07:06] <unomi> SkytracK, http://www.ubuntu-eee.com/wiki/index.php5?title=Main_Page
[07:06] <nickrud> jigp, or /home/jigp/Mic<tab> , using bruenig 's excellent advice
[07:06] <yoyit2> ok so i have an mp4 file off of a phone, and on the phone it has audio, but when u play the file on ubuntu, there is no audio, just video
[07:06] <bruenig> yoyit2: run 'file thenameofthe.mp4'
[07:06] <bruenig> paste output
[07:07] <nickrud> jigp, typo ->  /home/jigp/MichaelLearnsToRock\ 2008\ CD\(cd\)/MichaelLearnsToRock\ 2008\ CD\(cd\).bin
[07:07] <albuntu> jigp: have you checked if the file is executable ? try checking with right clicking the file , going to properties and in permissions make this file executable
[07:07] <bruenig> albuntu: even if it weren't executable he wouldn't be getting command not found errors however
[07:07] <bruenig> that is what I thought at first
[07:07] <bruenig> he would just get permissions errors
[07:08] <ldm> i am ldm
[07:08] <albuntu> bruenig: right but anyway its better to let him give a look. just to be sure
[07:08] <yoyit2> bruenig: the command is not found
[07:08] <jigp> bruenig : drwxr-xr-x  3 jigp jigp       4096 2009-01-15 14:09 MichaelLearnsToRock 2008 CD(cd)
[07:09] <bruenig> yoyit2: paste the exact command you used
[07:09] <bruenig> jigp: if you are in the same directory as the file, just do this: ./Mich<tab> (that is literally type that and then press tab
[07:09] <yoyit2> bruenig:  daniel@daniel-ubuntu:~$ run VIDEO_157.mp4
[07:09] <yoyit2> bash: run: command not found
[07:09] <jigp> albuntu : its an executable.. its .bin
[07:09] <bruenig> yoyit2: where you put 'run' put 'file'
[07:10] <albuntu> jigp: cant you  try to rename the file and try again ?
[07:10] <albuntu> jigp: try renaming it to something simple like : file.bin
[07:10] <homeskillet> isnt /dev/sda1 for usb drives? i dont have one plugged in, i have winxp installed and am tryin to install ubuntu over it but it just wants to partition to add stuff on /dev/sda1
[07:10] <bruenig> there is a way to do it without renaming
[07:10] <SkytracK> unomi ta for link looking now
[07:11] <transporter_> can somebody help me cairo clock does not open up as normal user but opens up as root error msg in terminal (cairo-clock:6753): librsvg-CRITICAL **: rsvg_handle_render_cairo_sub: assertion `handle != NULL' failed
[07:11] <jigp> albuntu : it's a .bin . I tried .change into .zip .rar
[07:11] <jigp> same thing
[07:11] <yoyit2> bruenig: still doesnt work
[07:11] <bruenig> yoyit2: paste the command you used
[07:11] <Slart> homeskillet: all hard drives in linux end up as /dev/sdX where X is a,b,c,d,e etc
[07:11] <albuntu> jigp: i am saying to rename the file. not the extension
[07:11] <jigp> I cannot cd MichaelLearnsToRock 2008 CD(cd) ... No such file or directory
[07:11] <Slart> homeskillet: not just usb drives
[07:11] <homeskillet> ok
[07:12] <yoyit2> bruenig: daniel@daniel-ubuntu:~$ file VIDEO_157.mp4
[07:12] <yoyit2> VIDEO_157.mp4: ERROR: cannot open `VIDEO_157.mp4' (No such file or directory)
[07:12] <yoyit2> daniel@daniel-ubuntu:~$
[07:12] <homeskillet> hey, how likely is it that if i just resize my winxp partition and install ubuntu on the other 33% that windows will still work properly?
[07:12] <albuntu> jigp: if you cant cd than the directory doesnt exist
[07:12] <grandy> anyone know if there is a way to make dpkg ignore files not being there when trying to remove?
[07:12] <bruenig> yoyit2: ls, is that file name in the output?
[07:12] <yoyit2> bruenig: huu??
[07:12] <bruenig> yoyit2: type: ls, paste the output
[07:13] <bruenig> presuming it isn't massive
[07:13] <Slart> homeskillet: pretty likely.. but as always.. do backups
[07:13] <albuntu> jigp: try cd in home or Documents or wherever that directory is and then try doing cd M and press TAB
[07:13] <transporter_> can somebody help me cairo clock does not open up as normal user but opens up as root error msg in terminal (cairo-clock:6753): librsvg-CRITICAL **: rsvg_handle_render_cairo_sub: assertion `handle != NULL' failed
[07:13] <jigp> albuntu : it exist.im there and I saw .bin file
[07:13] <albuntu> jigp: is that directory in your home folder ? where is it
[07:14] <yoyit2> bruenig: ok, so ur wanting me to type "is, the output" into terminal?
[07:14] <bruenig> yoyit2: type: ls
[07:14] <bruenig> yoyit2: paste the output here
[07:14] <jigp> albuuntu yes
[07:14] <rzz8509> yoyit2  you can probably play in in mplayer sudo apt-get install mplayer
[07:15] <albuntu> jigp: what do you mean yes ? tell me where the directory is ? in your home folder or in the documents folder ?
[07:15] <jigp> albuntu : /home/jigp/mike/mike.bin - there I changed it
[07:15] <rzz8509> yoyit2 than mplayer file.bin
[07:15] <jigp> yes albuntu in my home folder
[07:15] <jigp> jigp
[07:15] <jigp> I even use root .su
[07:15] <albuntu> jigp: than do this : cd /home/jigp/mike
[07:16] <bruenig> jigp: the file was in a subdirectory?
[07:16] <bruenig> this entire time you made us believe it was in /home/jigp, not /home/jigp/mike
[07:16] <grandy> hello, i seem to have caused apt/aptitude/dpkg to have an error... dpkg -r packagename can't finish b/c some of the files were not installed b/c i pressed crtl-c in the middle of installation
[07:16] <dayo_> grandy: man dpkg
[07:16] <grandy> dayo_: been looking at it, tried --force-all
[07:16] <transporter_> can somebody help me cairo clock does not open up as normal user but opens up as root error msg in terminal (cairo-clock:6753): librsvg-CRITICAL **: rsvg_handle_render_cairo_sub: assertion `handle != NULL' failed
[07:16] <albuntu> jigp: now try sudo sh ./mike.bin
[07:16] <grandy> dayo_: i seem to be overlooking something, but i'm not sure what
[07:16] <jigp> bruenig : albuntu wants me to change the file  name.so I made it mike folder and mike.bin
[07:16] <dayo_> grandy: have u tried sudo dpkg --configure -a   ?
[07:17] <yoyit2> rzz8509: mplayer says "Cannot find codec for audio format 0x726D6173"
[07:17] <wcdl> hey there... is there any way to get rid of the photoshop gray background (using on wine)
[07:17] <grandy> dayo_: not yet, let me try that
[07:17] <albuntu> jigp: sudo sh ./home/snake/mike/mike.bin
[07:17] <rzz8509> yoyit2 did it play the sound>
[07:17] <yoyit2> rzz8509: no, cuz it had the error
[07:17] <jigp> jigp@jigp:~/mike$ sudo sh./mike.bin
[07:17] <jigp> sudo: sh./mike.bin: command not found
[07:17] <grandy> dayo_: no output when i do that
[07:18] <rww> jigp: put a space after "sh"
[07:18] <albuntu> jigp: put the space after sh
[07:18] <nite_johnboy> Has any one here setup a USB bootable Ibex ?
[07:18] <Slart> !usb | nite_johnboy
[07:18] <transporter_> can somebody help me cairo clock does not open up as normal user but opens up as root error msg in terminal (cairo-clock:6753): librsvg-CRITICAL **: rsvg_handle_render_cairo_sub: assertion `handle != NULL' failed
[07:19] <yoyit2> rzz8509: any ideas??
[07:19] <jigp> albuntu : jigp@jigp:~/mike$ ls
[07:19] <jigp> mike.bin  info.nfo  Sample
[07:19] <jigp> jigp@jigp:~/mike$
[07:19] <jigp> that's the file
[07:20] <FloodBot1> jigp: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[07:20] <useruseruseruser> transporter_: what is cairo clock?
[07:20] <nite_johnboy> Slart; I'm currently running from a Corsair 16gb thumb - have did a setup like this yet - I have question about different brands of thumb drives ? ?
[07:20] <albuntu> jigp: i told you put a space after the "sh"
[07:20] <transporter_> useruseruseruser: well its an eye candy
[07:20] <albuntu> jigp: sudo sh ./mike.bin
[07:20] <dayo_> useruseruseruser: an egyptian timepiece :P
[07:20] <Slart> nite_johnboy: then ask that question to the channel.. if someone knows they will probably answer
[07:20] <abhi_> ubuntu-in
[07:21] <xxCody> I've been at this for a long time. I cannot figure out how to make a drop down menu in ubuntu. I've googled it and have posts a thread on ubuntu and techsupport, no one has answered. Can anyone help me?
[07:21] <rzz8509> yoyit2 it is a codec that is unsupported by ffmpeg so it may work in vlc
[07:21] <jigp> albuntu : jigp@jigp:~/mike$ sudo sh ./mike.bin
[07:21] <jigp> ./mike.bin: 1: Syntax error: Unterminated quoted string
[07:21] <rww> transporter_: try "cairo-clock -t themename" (you can get a list of themes with "cairo-clock -l", I think.
[07:22] <transporter_> rww : well its a problem with my permissions i cannot open cairo clock as a normal user i can open it up as a root
[07:22] <rzz8509> yoyit2  it is called 3gp
[07:22] <xxCody> Maybe too much traffic:  I've been at this for a long time. I cannot figure out how to make a drop down menu in ubuntu. I've googled it and have posts a thread on ubuntu and techsupport, no one has answered. Can anyone help me?
[07:22] <yoyit2> rzz8509: still no sound
[07:23] <Flynsarmy> Is there a way to get an images dimensions from the command line?
[07:23] <Greencoat1982> can someone help me with accessing files I have on my vista box, from my intrepid laptop
[07:23] <albuntu> jigp: have you edited the file ?
[07:23] <rww> transporter_: probably because one of your local configuration settings is broken. Try those commands and see what happens.
[07:23] <jigp> albuntu yes. the folder is mike now and file mike.bin
[07:23] <Greencoat1982> I have samba installed, and the folder shared in vista
[07:23] <transporter_> rww can u just gimme a command that i can copy paste
[07:23] <albuntu> jigp: no i mean have you edited the files contents ?
[07:23] <Greencoat1982> and I can see my laptop from the vista box
[07:23] <rww> transporter_: I just gave you two.
[07:23] <jigp> albuntu : nope
[07:24] <albuntu> jigp: try redownloading the file and try again
[07:24] <Greencoat1982> but it won't let me connect to my vista box from my ubuntu laptop
[07:24] <Slart> Flynsarmy: take a look at imagemagick, it can do what you want
[07:24] <transporter_> rww please meet me in pvt chat
[07:24] <rzz8509> yoyit2 sudo apt-get install vlc
[07:24] <Greencoat1982> I type in the share address and input the correct passowrd
[07:24] <rww> !msg | transporter_: no
[07:24] <tsai0> hello all, is there a way to upgrade from 32bit ubuntu to 64bit without a complete reinstall or having to save the home folder yet? Just curious.
[07:24] <Flynsarmy> Slart, it's not installed by default. need something that you dont have to install
[07:24] <Greencoat1982> but nothing shows up
[07:25] <nite_johnboy> I'am currently using a 16gb Corsair thumb drive picked up for a very good buy - not very much room left though - disk usage reports only about 8gb free - I really like this - it runs really fast and all - would like to pick-up a 32gb next - is there a brand other then Corsair anyone would recommend that would be cheaper but as reliable as the Corsair ? ?
[07:25] <n2diy> Has my user, I right click on the tool bar clock, but I can't adjust the date or time. I click on unlock, enter my user password, and fail authentication. What's up?
[07:25] <Greencoat1982> and if noone here can help, can someon at least point me towards a networking room
[07:25] <jigp> albuntu : is there a know application to extract this bin?
[07:25] <Slart> Flynsarmy: then I don't know of anything
[07:25] <rww> tsai0: Nope. To go from 32bit to 64bit you have to reinstall.
[07:25] <n2diy> As
[07:25] <transporter_> rww ubottu ok so here it is can somebody help me cairo clock does not open up as normal user but opens up as root error msg in terminal (cairo-clock:6753): librsvg-CRITICAL **: rsvg_handle_render_cairo_sub: assertion `handle != NULL' failed
[07:25] <Slart> tsai0: nope.. you need to reinstall
[07:25] <albuntu> jigp: it should run normally even if you double click it and click run from the options that you get
[07:26] <paul68> is there a way that I don4t have manually select my proxy at work and deselect it when I am connected at home
[07:26] <rww> transporter_: Are you going to try the commands that I gave you, or ignore me?
[07:26] <tsai0> rww:  , Slart:  are you on 64bit?
[07:26] <Slart> tsai0: yes
[07:26] <transporter_> no rww i did try ur command im sending u a pastebin gimme a sec
[07:26] <rww> tsai0: yes, I am.
[07:26] <miranda_psi> paul68: just in firefox?
[07:26] <Greencoat1982> So no one has any hints?
[07:27] <Greencoat1982> at least someone tell me of another room that could help then?
[07:27] <nite_johnboy> Is there a brand of 32gb thumb drive someone would recommend ? ?
[07:27] <Slart> Greencoat1982: have you read the documentation for samba?
[07:27] <paul68> miranda_psi: I guess so since its a http proxy here at work
[07:27] <tsai0> Slart: , rww: did you get flash working without a lot of reworking.  I had Debian 64bit installed before and flash was my biggest issue like a year and a half ago.
[07:27] <transporter_> rww: http://paste.ubuntu.com/107241/
[07:27] <Slart> tsai0: yes
[07:27] <Greencoat1982> yes, and I can't figure it out, trust me this is always the last place I look for help
[07:27] <rww> tsai0: Flash worked fine for me. Just had to sudo apt-get install flashplugin-nonfree
[07:27] <chalcedony> I've forgotten KDE setting up, been so long ... where do you change the colour and outline of the desktop text under the icons? there is a foreground and background, normally white on black
[07:28] <miranda_psi> paul68: try looking at foxy proxy - it will at least make life easier
[07:28] <Greencoat1982> I had intrepid on my desktop but wanted to try the 64 bit version of vista
[07:28] <Dexi> hey rww do you know anything about eggdrop?
[07:28] <Slart> Greencoat1982: hmm.. then I can't really help you further, sorry
[07:28] <rww> transporter_: Okay. What happens when you do "cairo-clock -t simple" (for example)?
[07:28] <Greencoat1982> I had it set up nicely before so that I could just network into the desktop and watch my content,
[07:28] <Slart> Greencoat1982: although I can tell you that samba is the way to go, afaik
[07:29] <rww> Guest83387: I know what it is, yes.
[07:29] <transporter_> rww: should i copy paste that?
[07:29] <Greencoat1982> is there a samba channel?
[07:29] <Guest83387> er
[07:29] <paul68> miranda_psi: now I have to go to system prefs and network proxy to adapt these manually
[07:29] <rww> transporter_: type cairo-clock -t simple in a terminal, yes
[07:29] <Guest83387> dammit how did i end up as a guest
[07:29] <keppi> Greencoat1982:  yes
[07:29] <Slart> Greencoat1982: not sure.. ##samba or #samba perhaps
[07:29] <jigp> albuntu : ok what application to choose?I tried k3b but no luck
[07:29] <tsai0> rww: , Slart:  Thanks, that anwers my question.. Hmm?  I wonder if I create a new partition, can I somehow migrate the home folder from the 32bit partition?
[07:29] <rww> Guest83387: I assume you didn't identify with nickserv
[07:29] <Talia> Here's a question for anyone!!!
[07:29] <rww> Dexi: see above
[07:29] <Dexi> haha rww yeah that was it
[07:30] <Slart> tsai0: yes, you can just copy the files to a new partition.. make sure to not overwrite that new partition with something else though
[07:30] <rww> tsai0: You can just move the files across after setup, yeah. Or do something like !separatehome
[07:30] <transporter_> rww i can see the clock
[07:30] <albuntu> jigp: i dont know an aplication.  it should execute normally with the commands i gave you before
[07:30] <rww> !separatehome | tsai0
[07:30] <Dexi> rww: when i run it with -n it runs fine, but without -n it wont connect to the server and i cant telnet in
[07:30] <rww> transporter_: Okay, so it works if you specify a theme with -t?
[07:30] <nite_johnboy> tsai0; It was really easy - just booted to a live Ubuntu CD and went to System/Administration/Create a USB startup disk - I was trying to do this with a 8gb USB and it would not work - picked up 16gb today and everything installed wonderful - that's what I'm running from right now.
[07:30] <keppi> why when an osx client writes to a samba share, it ignores "force create mode"
[07:30] <jigp> albuntu : its not .cue right?
[07:31] <jigp> albuntu : I've seen .cue here
[07:31] <mountx> anyone know of a good guide to fixing compiz causing video flashing on 8.10
[07:31] <transporter_> rww: looks like it yeah
[07:31] <Talia> When I bought my computer, the hard drive was already partitioned between C: and D:  I then installed ubuntu on d:, and C:, which had windows corrupted.  Is there anyway to retrieve that partition using ubuntu?
[07:31] <tsai0> ubottu: , nite_johnboy: i will have to try this. thanks all
[07:31] <transporter_> rww: now what?
[07:31] <useruseruseruser> tsai0: bye bye
[07:31] <rww> transporter_: Okay. Well, either pick a theme and run it with a -t switch, or figure out which part of your cairo-clock or cairo configuration is broken.
[07:31] <miranda_psi> paul68: do you actually use anything other than firefox at work? if not then give foxy proxy a go - don't know anything for system wide...
[07:32] <rww> transporter_: I don't use cairo much, so I'm not sure how to help you diagnose that.
[07:32] <androidfx> how can i install JavaSE6 Update 11 in ubuntu, i download the linux package, but where is supposed to be, at the root directory, at the usr, ??
[07:32] <transporter_> rww: its something do to with the permissions
[07:32] <paul68> miranda_psi: I also use msn mails and yes firefox also
[07:32] <phpmonk> how to configure mutt for POP and SMTP?
[07:32] <Talia> anyone?
[07:32] <Talia> When I bought my computer, the hard drive was already partitioned between C: and D:  I then installed ubuntu on d:, and C:, which had windows corrupted.  Is there anyway to retrieve that partition using ubuntu?
[07:32] <rdw200169> Greencoat1982: this guy got it to work http://ubuntuforums.org/showthread.php?t=315916
[07:32] <transporter_> rww: i need to switch the permission to a normal user
[07:32] <nite_johnboy> tsai0: this is really cool I can basically take this to any computer and boot to it - nice - Is there any brand USB you like best - Will be getting a 32gb soon ?
[07:33] <paul68> rdw200169: hi my friend happy new year to you
[07:33] <rdw200169> paul68: hey, you too
[07:33] <rww> transporter_: Did you run something cairo-related with administrative privilages? it might have made some part of your user-specific cairo configuration owned by root.
[07:33] <rdw200169> paul68: how's the firewall going?
[07:34] <paul68> rdw200169: working like a charm thanks to your help just having a puzzle at this point with the proxy server at work
[07:34] <xxCody> Can anyone help in making my own menu? Is there an app for this? I want to make my own drop down menu like Applications.
[07:34] <transporter_> rww: no i did not do anything
[07:34] <mountx> hey ... anyone know of a fix for getting compiz to stop skipping video ... switching to metacity works but was hoping for a compiz fix ... video is ATI card
[07:34] <Greencoat1982> rdw200169 that only seems to be for previous distros
[07:34] <phpmonk> xxCody: wxWidgets
[07:34] <rzz8509> purple monkey dish-water
[07:34] <rdw200169> Greencoat1982: have you tried the fix from the last post?
[07:35] <ik_> hallo everyone
[07:35] <rww> transporter_: Okay, then I doubt it's a permissions thing. As I said, something in your cairo configuration in your home foder is probably broken, and running as root is using root's cairo configuration, hence it working. I doubt it's a permissions issue, or many more people would be having it.
[07:35] <rdw200169> mountx: i had the same problem for a while with Nvidia, then I upgraded to the latest drivers then it went away
[07:35] <useruseruseruser> ik_: hi hi hi
[07:35] <transporter_> rww: i tried uninstalling reinstalling it did not work
[07:35] <rdw200169> mountx: i also had that problem when i used compiz on multiple displays, now I don't do that...
[07:35] <xxCody> Thats coding. very good answer though lol.
[07:35] <ik_> anyone who can help me with floola?
[07:35] <mountx> rdw: does envy install the latest drivers?
[07:35] <miranda_psi> paul68: for firefox you could use foxy proxy, and use say pidgin at home and empathy at work (not ideal, but a workaround...)
[07:35] <rww> transporter_: uninstalling and reinstalling doesn't remove the cairo configuration stuff in your home folder.
[07:36] <xxCody> Is there another app for have a menu?
[07:36] <rdw200169> paul68: proxy servers are a *pain*
[07:36] <transporter_> rww: what do i do?
[07:36] <rdw200169> paul68: you never know what kind of filtering they're doing...
[07:36] <Greencoat1982> rdw200169 it just said no application is set to handle
[07:36] <rww> mountx: As far as I know, there's no fix for that, unfortunately. The fglrx driver has problems with compiz+video and compiz+gaming, and the usual solution is to temporarily disable compiz while watching videos or gaming.
[07:36] <transporter_> rww: please think of something (brb)
[07:37] <rdw200169> Greencoat1982: i don't know, that's the best I found... personally I avoid Samba and Windows file sharing at all costs, it's just a pain, even on windows!
[07:37] <rdw200169> Greencoat1982: did you know that Vista can't even file share with XP???
[07:37] <rww> transporter_: figure out which part of your cairo configuration is broken. heck, delete the cairo settings in your home folder if that isn't too inconvenient. As I've said already, I don't use cairo, and I /can't/ use it right now, so I can't diagnose it further.
[07:37] <Greencoat1982> I know but what other option do I have for accessing the files on my vista box
[07:37] <mountx> ok ... that's what i've been doing ... tried several 'fixes' w/ no results
[07:37] <paul68> rdw200169: well the thing is that I want to be able to connect automaticly to the proxy at work and automaticly connect to the homenetwork without proxy when I am at home
[07:38] <ik_> no-one who know how to use floola on ubuntu 8.10?
[07:38] <rdw200169> paul68: from the same linux box?
[07:38] <Greencoat1982> yeah, MS is alround crap, but I wanted to try some games on vista
[07:38] <Greencoat1982> just haven't reinstalled the dual boot yet
[07:38] <rdw200169> Greencoat1982: so you're just trying to access files in there?
[07:38] <mountx> why dual boot ... just virtualbox it
[07:38] <Greencoat1982> yes
[07:38] <transporter_> rww: i don't have a problem with anything i can alwayz reinstall it so i pretty much think i get my settings back if i wanted to right
[07:38] <paul68> rdw200169: with the same laptop yes now I have to go to system prefs network proxy to adapt the settings and I am to lazy lol to do this each time
[07:39] <rww> mountx: virtualbox and games don't work well together =/
[07:39] <Greencoat1982> because the virtual box wasn't running very good
[07:39] <mountx> ahh .. <-- not much of a gamer
[07:39] <rdw200169> paul68: ah, i see, that *is* pretty lazy!
[07:39] <jigp> albuuntu : I got it now. it has been extracted now.its mike.iso now. how to extract iso?
[07:39] <Greencoat1982> well the main game I play works well in linux with win, but some of the newer ones can get real buggy
[07:39] <rdw200169> paul68: and it's such a handy tool, too!
[07:40] <mountx> my g/f plays spore and sims ... are those doable on linux?
[07:40] <Greencoat1982> The only semi-worthwhile product MS has ever made is the xbox and 360
[07:40] <ik_> floola?
[07:40] <rdw200169> jigp: you can mount the iso, mount -o loop src.iso /mountpoint
[07:40] <rww> Dexi: Hrm, that's weird. Not sure how to help, unfortunately :/
[07:40] <Greencoat1982> spore no, thats why I went to vista to play it
[07:40] <ik_> anywnl
[07:40] <paul68> rdw200169: since my laptop can connect to both wifi networks without any manual input I was wondering if I could achieve the same with the proxy connection
[07:40] <Greencoat1982> sims I don't know, but doubt it
[07:41] <rww> mountx: Nope, neither of them work well at all on Wine.
[07:41] <rdw200169> paul68: reluctantly, i don't think there's a solution for that yet, until NetworkManager comes out with Proxy support per-connection
[07:41] <Dexi> rww: its ok
[07:41] <ik_> help for floola
[07:41] <ik_> plz
[07:41] <rdw200169> paul68: i'm assuming that's what you're talking about, as far as automatically connecting to wireless connections
[07:42] <rww> Dexi: You could maybe ask in the Eggdrop IRC channels ( http://www.eggheads.org/support/ )
[07:42] <yasarrr> hello
[07:42] <Dexi> rww: i tried they are all bare... nobody to answer me lol
[07:42] <mountx> has anyone had success w/ blackberry's and wine/virtualbox?
[07:42] <Greencoat1982> man I really wanted to watch some of my shows before bed
[07:42] <transporter_> can somebody help me cairo clock does not open up as normal user but opens up as root error msg in terminal (cairo-clock:6753): librsvg-CRITICAL **: rsvg_handle_render_cairo_sub: assertion `handle != NULL' failed
[07:42] <useruseruseruser> yasarrr: hi
[07:42] <ik_> hallo
[07:43] <ik_> I'm looking for some help with floola
[07:43] <rdw200169> paul68: you could write something with python-dbus to watch NetworkManager events, and if it connects to the network at work, have it perform the switch...
[07:43] <chaqui> I just spent time figuring out how to ssh, and now I do it from a local connection, now how do I take it elsewhere?
[07:43] <nightrid3r> !paste
[07:44] <Kartagis> how to reinstall the package after applying a patch? dpkg-reconfigure?
[07:44] <transporter_> can somebody help me cairo clock does not open up as normal user but opens up as root error msg in terminal (cairo-clock:6753): librsvg-CRITICAL **: rsvg_handle_render_cairo_sub: assertion `handle != NULL' failed
[07:44] <paul68> rdw200169: to get it straight when I want to connect automaticly to the proxy at work without having to adapt the settings manually, I was affraid you where going to mention that
[07:44] <rdw200169> paul68: then again, i can't remember which file gnome-network-preferences changes to set the proxy, i believe it's in gconf somewhere
[07:45] <jigp> rdw200169 : jigp@jigp:~/mike$ sudo mount -o loop mike.iso /mountpoint
[07:45] <jigp> mount: mount point /mountpoint does not exist
[07:45] <SingAlong> Hi all!
[07:45] <rdw200169> jigp: that was an example, make an empty directory somewhere
[07:45] <useruseruseruser> Sindacious: hi
[07:45] <Sindacious> ..
[07:45] <rdw200169> jigp: like /home/<your user name here>/iso
[07:45] <SingAlong> where's the libX11 in Ubuntu? this in reference to this: http://www.linuxfromscratch.org/pipermail/blfs-support/2006-November/061521.html I need to know where libx11 resides to correct this problem
[07:46] <paul68> rdw200169: it is indead I saw it in the gconf as http-proxy but no direct indictation that is adapted in the network connections part
[07:46] <rdw200169> jigp: then use that direcotry
[07:46] <paul68> rdw200169: *indeed
[07:46] <rdw200169> paul68: i've had mine as a proxy before, so it has the IP address in there as the setting
[07:47] <Greencoat1982> rdw200169 would it matter if I don't have a password for my vista user account?
[07:47] <rdw200169> paul68: this is in .gconf/system/http_proxy/%gconf.xm.
[07:47] <rdw200169> Greencoat1982: i have not idea :(
[07:47] <SingAlong> anybody?
[07:48] <paul68> rdw200169: ok I will have to snoop around a bit thanks for your help and talk to you soon, getting busy here at work
[07:48] <rdw200169> paul68: so, i'm assuming that if you change the entry with "use_http_proxy" to value="true" it would turn on the proxy
[07:48] <paul68> rdw200169: seems logic
[07:49] <Slart> SingAlong: there are plenty of tools to search for files in linux.. try locate or find
[07:49] <Rencx> How can I save video from camera?
[07:50] <rdw200169> paul68: gimme a sec, i'm gonna show you an example of mangling around with gconf
[07:50] <unomi> this is really strange
[07:50] <unomi> ive tried the older kernels as well, it doesnt seem related to that
[07:50] <Rencx> How can I save video from camera? And what program i must use?
[07:50] <unomi> where can i see error logs relating to bringing up eth0 in the boot process?
[07:50] <fosco__> unomi: type dmesg
[07:51] <paul68> rdw200169: ok
[07:51] <Slart> Rencx: I guess it would depend entirely on what kind of camera it is.. search the forums or use google to see if there are any howtos for your specific camera model
[07:52] <mountx> Recnx - cheese is a good general one
[07:52] <rdw200169> paul68: ok, here's an example of screwing around with gconf in python http://paste.ubuntu.com/107248/
[07:52] <unomi> also, arrow up gives me 'screenshot'
[07:53] <Rencx> Why i need camera model i just want import files throught DV
[07:53] <ploo> when using parted can you tell it to use the rest of the free space?
[07:53] <rdw200169> paul68: and here's one of screwing around with the dbus: http://paste.ubuntu.com/107249/
[07:54] <chaqui> what's the command to open an ssh over the internet?
[07:54] <chaqui> I can open it in my local lan.
[07:54] <mountx> ssh -l  loginname domainname
[07:54] <mountx> or ssh user@domainname
[07:55] <chaqui> where the domain name is = ip address?
[07:55] <unomi> fosco_ i see it at the beginning of dmesg.
[07:55] <unomi> but once the system is fully booted, it is not visible in 'ifconfig'
[07:55] <mountx> ssh user@123.34.678
[07:55] <jeffszusz> I've got JeOS installed in a virtualbox but It won't accept a static IP. does anyone know of any reason JeOS or VirtualBox wouldn't let me use the Virtual Machine's mac address to assign a static IP via my router?
[07:56] <paul68> rdw200169: thanks for your help gotta go now since the phone is getting red heated lol
[07:56] <yao_ziyuan> how do i disable routine disk check?
[07:56] <rdw200169> paul68: you may also want to read this: http://people.redhat.com/dcbw/NetworkManager/NetworkManager%20DBUS%20API.txt
[07:57] <paul68> rdw200169: ok thanks
[07:58]  * paul68 really walking out a here now
[07:58] <mountx> yao ... you probably don't want to do that
[07:58] <mountx> but ctr+c, ctrl+d
[07:59] <yao_ziyuan> mountx: ok. and how to run a manual disk check?
[08:00] <yao_ziyuan> mountx: i'll google for the second question
[08:00] <mountx> not sure
[08:00] <mountx> there's probably a util out there
[08:01] <unomi> how strange, the system has been working faultlessly for weeks, and now this
[08:01] <chaqui> mountx: I don't understand this ip address buisness. its obviosuly not my 192.168.x.x ip address
[08:01] <mountx> no
[08:01] <kinja-sheep> Any excellent "Spider Solitaire" game? I have been checking out the forums and some games are... blah.
[08:01] <mountx> where are you trying to ssh to ... an external or do you have something virtual going on?
[08:01] <chaqui> its the address from whatismyip.com ?
[08:01] <unomi> got rid of the screenshot issue by going to keyboard shortcuts; which ive never opened before
[08:02] <chaqui> I have a desktop and a laptop
[08:02] <mountx> do you have a firewall?
[08:02] <chaqui> I just want to tunnel so I can vnc
[08:02] <doseryder> Is it just me or is the system requirement for the last two releases require more (better, faster, newer) hardware
[08:02] <chaqui> no firewall
[08:02] <mountx> doseryder ... that's cpu's for you
[08:02] <Kartagis> hello
[08:03] <Kartagis> how to reinstall the package after applying a patch? dpkg-reconfigure?
[08:03] <chaqui> doseryder the last two ubuntu releases have included compiz as there windows manager.
[08:04] <doseryder> mountx: yea.. I'm using p4 3.2 (mildly oc'd to 3.36) with a fairly recent video card (tho its a ATI (Oh No)) and 2 gigs of high quality ram (dual chan)
[08:04] <mountx> chaqui so your trying to ssh to another cpu ... your localaddress for that cpu should work if your on the same router
[08:05] <doseryder> My first ever ubuntu release was 6.10 (Can't remember what the code name was) and it was kinda smooth
[08:05] <mountx> I remember the 5.0x days ... bad times .. but worked well as a server
[08:05] <ardchoille> doseryder: Edgy?
[08:05] <mountx> now I got my whole family on ubuntu(mint at least)
[08:05] <chaqui> mountx: and it does, now what I want to do is do it from my parents house, or wheveer else I may find the internet.
[08:06] <doseryder> I think so, if feisty is the subsequent release
[08:06] <chaqui> mountx: so would that be like "ssh user@gatewayip?
[08:06] <doseryder> s/is/was/
[08:06] <chaqui> "
[08:06] <mountx> you need to fwd a port to the computer you want to ssh into ... i.e. forward port 22 to 192.168.x.x port 22
[08:07] <mountx> then you will ssh to your outside IP
[08:07] <chaqui> oh wow, now port forwarding makes so much sense to me
[08:08] <chaqui> since port 22 is the defualt port for openssh I won't even need to distinguish it right?
[08:09] <doseryder> You might wanna fix (associate) an Local IP to the host running ssh-server too
[08:09] <PC_Nerd> Hi, how can I install localeconf for 8.04 - I understand its no longer in the repositories but how do you install it?
[08:09] <mountx> no ... you should be fine unless you've made changes in /etc/ssh/
[08:10] <mountx> but I would suggest disabling root logins via ssh
[08:11] <jxander> is there a dock that won't need compositing?
[08:11] <chaqui> do I do that through services?
[08:12] <doseryder> mountx: hey do you know anything about installing printers (CUPS or whatever)?
[08:12] <mountx> you might be able to ... check out /etc/ssh/sshd_conf
[08:12] <WalterMundt> question: I just installed ubuntu on my laptop, any recommendations for getting an "Atheros Communications Inc. AR242x" wifi chip working?  It worked out of box on Fedora 10 so I know the support is out there
[08:12] <mountx> I don't have a printer .. cups disabled for me ;}
[08:12] <alexandroos> hello I'm going to install kubuntu 8.04 lts from the internet with the minimal cd, does it come with kde 4.1.4?
[08:12] <unomi> ok silly question maybe; should '/etc/network/interfaces' list eth0 ?
[08:13] <Kartagis> how to reinstall the package after applying a patch? dpkg-reconfigure?
[08:15] <DwightShroot> whats the command to navigate...ch? /home....
[08:15] <alexandroos> DwightShroot, cd /home
[08:15] <mountx> cd ~/ <tab>
[08:15] <DwightShroot> thanks
[08:15] <PC_Nerd> Any ideas on getting localeconf installed? Its not in repositories?
[08:16] <doseryder> mountx: since you're on the topic of ssh with the other dude, I can't remember what/where file contains the "banner" (i.e. the message banner, when the client FIRST login)
[08:16] <mountx> lemme check
[08:16] <doseryder> you know what I'm talking about tho right?
[08:16] <unomi> how weird is this?! : my /etc/network/interfaces
[08:16] <unomi> auto lo
[08:16] <unomi> iface lo inet loopback
[08:16] <unomi> the end
[08:16] <mountx> cd /etc/
[08:17] <mountx> woops ... wrong window
[08:17] <doseryder> this aint no terminal-emulator :p
[08:18] <alexandroos> hello I'm going to install kubuntu 8.04 lts from the internet with the minimal cd, does it come with kde 4.1.4?
[08:18] <unomi> mountx: while you are there, can you tell me whats in your /etc/network/interfaces file?
[08:18] <alexandroos> ops sorry for repeating
[08:18] <mountx> i can tell you that auto lo
[08:18] <rww> doseryder: that banner thing is at /etc/motd; location is configurable in sshd configuration.
[08:19] <mountx> iface lo inet loopback
[08:19] <unomi> weird, no mention of eth0 ?
[08:19] <mountx> nope .. never seen that on a lin install .. maybe just me though
[08:19] <unomi> alexandroos: http://www.kubuntu.org/news/8.04-release
[08:19] <doseryder> aight cool.   I totally forgot.
[08:20] <rww> alexandroos: Kubuntu Hardy comes with KDE 3.something, if I remember correctly. Intrepid has 4.1
[08:20] <rebel_kid> i remember a program to enable the mouse in cli (to facilitate easy copying/pasting of text) i cant find the package name, can anyone point me to it
[08:20] <rww> unomi, mountx: /etc/network/interfaces only has lo in it by default, because NetworkManager deals with eth0 and other interfaces. You can add eth0 if you want it to be managed by ifup/ifdown
[08:21] <unomi> rww well networkmanager has stopped working for some reason
[08:21] <mountx> i don't use networkmanager
[08:21] <mountx> does that make a diff?
[08:21] <rww> unomi: feel free to add an eth0 stanza if you want. The configuration format is in "man interfaces"
[08:21] <unomi> alexandroos: http://www.kubuntu.org/news/8.10-release it has 4.1.2
[08:22] <unomi> its weird its just stopped working though
[08:22] <Flannel> alexandroos: 8.04 isn't LTS for Kubuntu either.  So you're not losing much by going with 8.10
[08:22] <Theaxiom> How do I upgrade to 8.10?
[08:22] <Flannel> !upgrade | Theaxiom
[08:22] <unomi> makes me worry that more things 'under the hood' are not working as they should
[08:22] <selig5>  /timestamps = off
[08:22] <doseryder> rww, when you say NetworkManager, are you referring to nm-applet?
[08:22] <Theaxiom> thx Flannel
[08:22] <alexandroos> thanks unomi and Flannel
[08:23] <rww> doseryder: nm-applet is an applet that allows you to control the NetworkManager system
[08:23] <alexandroos> I'm off see you later guys ba bye
[08:23] <mountx> later
[08:23] <arghh2d2> is network manager any good?
[08:23] <doseryder> bye alex
[08:24] <Tekno> nm is good
[08:24] <Tekno> supports mobile phones also
[08:24] <arghh2d2> Tekno: when did it get better?
[08:24] <unomi> (gconf-editor:6034): GnomeUI-WARNING **: While connecting to session manager:
[08:24] <unomi> None of the authentication protocols specified are supported.
[08:24] <rww> arghh2d2: It's the default in recent versions of Ubuntu. Some people have problems with it and find other network control methods (like ifup/ifdown, wicd, etc.) better.
[08:24] <PC_Nerd> how do you change the locale settings through terminal?
[08:24] <arghh2d2> rww, yeah, count me in as one of those
[08:24] <Tekno> arghh2d2: works with 3G networking very good
[08:25] <Tekno> wicd doesnt support at all
[08:25] <rww> !locale | PC_Nerd
[08:25] <PC_Nerd> ubottu: that uses localeconf which I cannot install... its not in the repo's and I cant find any documentation post dapper.
[08:26]  * doseryder taking notes...
[08:26] <keppi> anyone know samba in here?
[08:26] <nguyenlo> 2222
[08:26] <rww> PC_Nerd: I've used http://blog.andrewbeacock.com/2007/01/how-to-change-your-default-locale-on.html before successfully. Try that.
[08:26] <DwightShroot> I did an ssh an im inside my iphone and have navigated to the folder i wanted, is there a way i can add files off my desktop to the folder
[08:26] <arghh2d2> PC_Nerd: its a bot isnt it?
[08:26] <PC_Nerd> huh? - thanks rww
[08:26] <arghh2d2> DwightShroot: sftp to iphone?
[08:27] <rww> PC_Nerd: by the way, Ubottu is a bot. People tell it to send factoids with messages like "!factoid | nickname"
[08:27] <keppi> !ubottu
[08:27] <unomi> sound has also stopped working i just found
[08:27] <DwightShroot> arghh2d2: is that the same as using the gftp program
[08:28] <arghh2d2> DwightShroot: dont think so
[08:28] <arghh2d2> maybe
[08:28] <unomi> is there a system wide 'reconfigure' command?
[08:28] <DwightShroot> ﻿arghh2d2: how do i sftp
[08:28] <selig5> T
[08:29] <Theaxiom> I am in trouble, I only have 7.1MB available in /boot and it won't let me upgrade...
[08:29] <arghh2d2> DwightShroot: i sftp to my ssh account go to the folder i want to put things in and just type 'put /path/to/file'
[08:29] <Flannel> Theaxiom: Remove some of your old kernels
[08:29] <mountx> unomi I had a smart ass comment ... but I'll save it
[08:29] <devex> does anybody know why the battery panel in gnome shows a shorter remaining  duration than acpi?
[08:29] <unomi> seriously considering a reinstall
[08:30] <mountx> ... unomi .. don't lose the battle ... this isn't windows
[08:30] <mountx> everything can be fixed ... most of the time
[08:30] <DwightShroot> ﻿arghh2d2: kind of a newb,.....
[08:30] <Theaxiom> Flannel: can I get rid of everything that is not 2.6.24-23?
[08:30] <keppi> ...by a reinstall ;)
[08:30] <DwightShroot> :-/
[08:30] <unomi> ok, but how to find out what to fix
[08:31] <mountx> what's wrong?
[08:31] <unomi> dmesg doesnt really have anything useful
[08:31] <rww> devex: One gets information directly from the battery, the other estimates based on recent battery level changes. Unfortunately, I don't remember which is which =/
[08:31] <PC_Nerd> I just noticed that on boot my machine (ubuntu server) says "Cannot set system time to xxxxxxxxxx" Where "xxxxx" is UTC time.....  it says it twice.  is that a major issue?
[08:31] <devex> rww: ah thx :)
[08:31] <Flannel> Theaxiom: Do it from your package manager.  And remove all of the old linux-image-version stuff (that isn't the current one)
[08:31] <arghh2d2> DwightShroot: sftp the same as you would ssh 'ssh dwightshr@iphone.or.whatever
[08:31] <unomi> no sound, no network on boot, usb devices that are connected on startup have to be reconnected to be usable
[08:31] <Theaxiom> Flannel: thanks so much, you da man!
[08:31] <unomi> had a keyboard thing where up arrow fired screenshot
[08:31] <mountx> ok lets start w/ no sound
[08:31] <unomi> but that is no resolved
[08:31] <mountx> what's your device ... lspci
[08:31] <mountx> in terminal
[08:32] <unomi> Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
[08:32] <mountx> what v. of ubuntu
[08:32] <unomi> intrepid
[08:33] <wjc> OK
[08:33] <unomi>  2.6.27-11-generic #1 SMP Thu Jan 15 11:03:58 UTC 2009 i686 GNU/Linux
[08:33] <unomi> hmm, should that really be SMP?
[08:33] <unomi> afaik its a single core with hyperthreading
[08:33] <arghh2d2> smp rules
[08:34] <rww> unomi: which processor?
[08:34] <arghh2d2> smp is the next best thing to a realtime kernel isnt it?
[08:34] <DwightShroot> ﻿arghh2d2: i dont have an sftp account
[08:35] <unomi> CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[08:35] <DwightShroot> ﻿arghh2d2: *ssh account
[08:35] <arghh2d2> DwightShroot: well sorry, i'm not sure about how to transfer files thru ssh
[08:35] <unomi> if i turn on hyperthreading dmesg will tell me its brought on 2 cores (double the bogomips)
[08:35] <rww> unomi: I think the P4 is supposed to use SMP. Hyperthreading is helped by it.
[08:35] <mountx> scp
[08:36] <rww> unomi: I've never actually used one, though, so I'm not sure.
[08:36] <mountx> Dwight -- scp
[08:36] <mountx> unomi ... run alsamixer in terminal just to make sure
[08:37] <alfdavid> how do i make an ubuntu boot cd
[08:37] <unomi> No mixer elems found
[08:37] <rww> alfdavid: Download a CD image at http://www.ubuntu.com/getubuntu/download then follow the instructions at https://help.ubuntu.com/community/BurningIsoHowto
[08:38] <arch3angel> hey everyone - does anyone know how to get the Atheros AR5007EG AR5BXB63 to work in ubuntu
[08:39] <arch3angel> ?
[08:39] <DwightShroot> ﻿arghh2d2: is there a command to import to a folder in the terminal ex: i want to import i file from /home/music   to /home/other
[08:40] <arch3angel> has anyone ever messed with this wifi card?
[08:40] <mountx> Dwight what do you mean ... copy?
[08:40] <mountx> unomi ... still googling around for you
[08:40] <DwightShroot> ﻿mountx: yeah
[08:40] <arghh2d2> arch3angel: i think madwifi is like ndiswrapper but specifically for the atheros chipset
[08:41] <mountx> cp /from/location /to/location
[08:41] <Gorlist> Morning
[08:41] <arghh2d2> DwightShroot: i think you need to take the other advice about scp
[08:41] <MinusSeven> i have adsl2, and get full speed through my wireless card in my desktop
[08:41] <MinusSeven> same as if I had the cable connected
[08:41] <MinusSeven> 15 megabits
[08:41] <srx2002> hello all, i'm looking for the best solution to backup an entire hard disk, I have my ubuntu system configured just the way I like it,,,,,however if I ever have a HD failure I would like to be able to use a cd/dvd perhaps to install to the new drive
[08:41] <Theaxiom> Flannel: Would I be unchecking the linux-headers and the linux-image that are lower than the highest version?
[08:41] <Flannel> Theaxiom: linux-image
[08:41] <arch3angel> odd thing is 8.10 shows the driver but it fails to work
[08:42] <arch3angel> strange
[08:42] <WalterMundt> arch3angel: I just had to get my atheros working
[08:42] <Theaxiom> Flannel: thanks
[08:42] <srx2002> anyone????
[08:42] <arch3angel> how did ya do it
[08:42] <MinusSeven> me?
[08:42] <rww> !backup | srx2002
[08:42] <arghh2d2> good for you MinusSeven good for you
[08:42] <arch3angel> WalterMundt: how did you do it
[08:42] <rww> srx2002: personally, I'd recommend sbackup
[08:42] <WalterMundt> arch3angel: disable the atheros driver in the hardware thingy, install a backports-modules package (not ure of the exact name), reboot
[08:42] <rww> !sbackup | srx2002
[08:42] <MinusSeven> just thought I'd tell everyone
[08:42] <mountx> unomi ... have you compiled alsa from source?
[08:42] <DwightShroot> arghh2d2: what was scp
[08:42] <MinusSeven> I was caught in the trap thinking 54 megabit wireless would be fine
[08:42] <WalterMundt> arch3angel: that worked for me; I'm on a Jaunty alpha but the forum post I read suggesting it was for intrepid
[08:43] <mountx> secure copy
[08:43] <arch3angel> WalterMundt: do you have a link to a tutorial
[08:43] <MinusSeven> but have 108 megabit wireless
[08:43] <WalterMundt> sec
[08:43] <mindwarp_> Anyone use a Quickcam on Ubuntu? I can't find a good writeup on how to get it working
[08:43] <mountx> it's like ftp except thru ssh
[08:43] <arch3angel> WalterMundt: thx
[08:43] <MinusSeven> hi Yanz
[08:43] <srx2002> sbckup
[08:43] <mountx> or you can do an rsync
[08:43] <yanz> Hello
[08:43] <mountx> I prefer rsync
[08:43] <arghh2d2> srx2002: copy to any other drive, the tricky part is making grub load it
[08:44] <WalterMundt> arch3angel: here's here I got it from: http://ubuntuforums.org/showthread.php?t=1026770
[08:44] <srx2002> yeah..that's what I mean..I'm not very good at the command line stuff
[08:44] <Theaxiom> Flannel: Why does it keep the old kernel images?
[08:44] <arghh2d2> damn, i'm way behind, forgot i scrolled up and didnt come back down
[08:44] <Gorlist> has anyone here tried install Ubuntu Server on a remote dedicated box?
[08:44] <WalterMundt> basically, you need to install linux-backports-modules-[your version] from Synaptic
[08:44] <Flannel> Theaxiom: Because at least one known good old one is important to have around, in case of regression (new kernel doesn't work, you can boot to an older one)
[08:44] <arch3angel> WalterMundt: thanks
[08:44] <srx2002> I'd just like to insert the dvd/cd  press a few buttons, answer a few questions and VOILA!!  everything back to the way it was
[08:45] <arch3angel> which model card do you have
[08:45] <Theaxiom> Flannel: ahh yes, smart
[08:45] <Gorlist> just trying to find out the options
[08:45] <whuffor_> I have a package question. I am considering compiling a newer version from source of an application than what is installed already from a package. What is the best way to handle that? Should I uninstall the current package before compiling the application from source?
[08:45] <srx2002> I guess I could be asking too much
[08:45] <WalterMundt> arch3angel: mine is the AR242x in that thread
[08:45] <Flannel> !install | Gorlist
[08:45] <Flannel> Gorlist: That page (first link) has two(?) methods
[08:45] <WalterMundt> arch3angel: yours is different, but since the driver you switch to from that process is called "ath5k" I thought it might help you
[08:45] <arghh2d2> srx2002: its not much, you just need to spend 30 minutes learning about 'grub'
[08:45] <arch3angel> Atheros AR5007EG AR5BXB63 <-- thats mine
[08:45] <Gorlist> Flannel: will take alook, ta
[08:45] <srx2002> ok
[08:46] <arch3angel> i will give it a shoot - anything to get it working :)
[08:46] <WalterMundt> arch3angel: good luck!
[08:46] <srx2002> partimage?
[08:46] <arch3angel> thanks
[08:46] <Slart> whuffor_: I would uninstall the old package first yes.. you might want to look at checkinstall too.. I think it might be useful
[08:46] <arch3angel> time to jump off and try to figure this out :) -- thanks again
[08:47] <whuffor_> Slart: Ah yes. I remember vaguely about checkinstall. I will look into it. Thanks for the assist
[08:47] <rww> whuffor_: More info on checkinstall at https://help.ubuntu.com/community/CheckInstall
[08:48] <whuffor_> rww: Cool. Thanks again
[08:48] <x1250> is there any guide on howto using the "Remote desktop" feature, so I may assist someone remotely? I know how to configure vino-preferences, but how to connect to the remote desktop ?
[08:48] <unomi> mountx, no i havent compiled it from source
[08:49] <unomi> everything was working out of the box for weeks untill this morning
[08:49] <mountx> what did you change this morning ... reboot anything?
[08:49] <unomi> just rebooted
[08:49] <unomi> it had been a few days since the last reboot
[08:50] <unomi> I also tried the hyperthreading capability, turned it on in bios just to see
[08:50] <savvas> x1250: Applications > Internet > Remote Desktop Viewer > Connect
[08:50] <unomi> dont know if it is related, it came up with the issues i have now, so i reverted to non-hyperthreading
[08:50] <savvas> x1250: you need the host (that is, the IP address of the destination you want to control)
[08:50] <Theaxiom> Hey everyone, I have an announcement to make. Flannel is the man, he is extremely helpful and is usually the first person to answer all my questions. Thanks Flannel!
[08:51] <mountx> i don't think that has anything to do w/ it ... but I could be wrong ... i have a similar intel card and have had probs w/ it also
[08:51] <x1250> savvas, got it thanks
[08:51] <mountx> but some tweaks have got it worked out
[08:51] <mountx> do you have pulse audio installed?
[08:51] <marenostrum> Hello. Ubuntu 8.10 Turkish locale. I can't reach Software Sources via System > Administration. It doesn't respond. And what's more, I can't change repositories via synaptic. It keeps saying "repositories changed, you have to click on the reload button"; I reload but the result is still the same. Any idea?
[08:51] <unomi> yes
[08:51] <Owner> guys, i'm putting debian on a nas server and need help with setting up software raid1. SHOULD I MIRROR SWAP or not? everywhere i look, i get different information...
[08:52] <Gorlist> Flannel:  http://tinyurl.com/3exghs seems to be the easiest (ive debootstrap but not keen) - only concern I will be connected via SSH, so the install has to be somewhat automated along with providing a root username/password and config network
[08:52]  * arghh2d2 is waiting for his chance to help Theaxiom, he'll show that smug Flannel who's helpful
[08:52] <chalcedony> in Kubuntu, where do you change the colour and outline of the desktop text under the icons? there is a foreground and background, normally white on black
[08:52] <mountx> removing pulse helped my sys... i had a reverberation in the audio forever till it drove me fix it
[08:52] <rww> marenostrum: You could change the repositories manually, maybe. The configuration file is /etc/apt/sources.list. After you change it, reload package data with sudo apt-get update.
[08:53] <chalcedony> mountx: what did you do? i hate how it sounds
[08:53] <jim_p> Owner, i would suggest no, if you can place it on another disk
[08:53] <mountx> removed pulse ... It was a last resort ... but it worked
[08:53] <mountx> can't promise any results
[08:53] <marenostrum> @rww thanks. I'll give it a try
[08:54] <chalcedony> mountx: did you put alsa in?
[08:54] <Owner> jim_p: i only have the two identical drives that i want to mirror but i need to be sure the system won't crash is one goes bad.
[08:54] <mountx> i had both alsa and pulse
[08:54] <Theaxiom> Anyone know a good lite program to burn movies to DVD?
[08:54] <Owner> jim_p: IF
[08:54] <mountx> not sure why .. but removing pulse fixed all my audio probs
[08:54] <jim_p> Owner, then mirror the swap
[08:54] <kraut> moin
[08:54] <jim_p> too
[08:54] <Theaxiom> ^ here's your chance arghh2d2
[08:54] <arghh2d2>  Owner are you tying to set up RAID?
[08:55] <mountx> before i had to install alsa from source
[08:55] <arghh2d2> bring it!
[08:55] <chalcedony> and alsa just took over? my sound card is a pain to configure for alsa.. we gave up i guess
[08:55] <mountx> (before 8.10)
[08:55] <unomi> Theaxiom: avidemux for encoding
[08:55] <chalcedony> oh?!!
[08:55] <Owner> arghh2d2: yeah, software raid1
[08:55] <jim_p> chalcedony, what sound card do you have?
[08:55] <Gorlist> preseeding!
[08:55] <Owner> arghh2d2: during a fresh install
[08:55] <chalcedony> jim_p: moment maybe i made notes
[08:55] <unomi> Theaxiom: and either brasero or k3b for burning
[08:55] <jim_p> chalcedony, lspci | grep Audio
[08:55] <arghh2d2> Owner: sorry i was just curious, i havent got the chance to play with raid yet
[08:56] <Theaxiom> unomi: You can burn a video DVD with Brasero?
[08:56] <arghh2d2> wtf, i cant even see Theaxiom's post, just people replying
[08:57] <unomi> Theaxiom: yeah you can, actually though i think i went with k3b (vds)
[08:57] <Theaxiom> arghh2d2: I am looking for a good program to burn movies to DVD to play them in a DVD player/
[08:57] <mountx> i like brasero ... don't burn dvd's though
[08:57] <arghh2d2> Theaxiom: super lit burn program --> bashburn
[08:57] <unomi> (vcds)
[08:57] <chalcedony> jim_p: ty
[08:57] <arghh2d2> Theaxiom: what kind of movies?
[08:57] <nite_johnboy> ! java
[08:57] <Owner> arghh2d2: i've already had the chance to lose .9tb of data because of badly setup ext4dev raid.. i'm REALLY trying to do better this time!
[08:57] <bazhang> unomi, data dvd's yes, video dvd's no for brasero
[08:57] <chalcedony> jim_p: 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
[08:58] <arghh2d2> Owner: i say good luck sir
[08:58] <arghh2d2> :)
[08:58] <Theaxiom> arghh2d2: avi movies
[08:58] <jim_p> chalcedony, it is supported by alsa 100%
[08:58] <bazhang> devede
[08:59] <arghh2d2> Theaxiom: there's ways to do it with gnu software but i cheat and use wine convertxtodvd
[08:59] <Gorlist> the first user you create in install is the root user?
[08:59] <arghh2d2> convertx2dvd is windows ware
[08:59] <chalcedony> jim_p: so if  i upgrade to 8.10 it will just work?
[08:59] <jim_p> chalcedony, if pulse wont take over, yes
[08:59] <bazhang> arghh2d2, better to suggest native ubuntu solutions
[09:00] <arghh2d2> :) my bad bazhang, just being honest about the difficulty
[09:00] <bazhang> arghh2d2, its true that the offerings are sparse though
[09:00] <chalcedony> jim_p: wow thank you for telling me :) i hope pulse can be turned off. and now i need the guts to do the upgrade
[09:00] <bazhang> !info devede
[09:00] <mountx> pulse can be removed
[09:00] <jim_p> chalcedony, remove it!
[09:01] <mountx> <-- did it
[09:01] <mountx> worked
[09:01] <jim_p> well done mountx
[09:01] <john_anderson> hello
[09:01] <chalcedony> okies .. i'm in 8.4 though. wait till i get some time
[09:01] <john_anderson> how do i place a "HOME" icon on the desktop
[09:01] <john_anderson> how do i place a "HOME" icon on the desktop (ubuntu 8.04)
[09:01] <mountx> hey john install ubuntu tweak
[09:02] <mountx> you can customize a whole boatload of stuff from that app
[09:02] <john_anderson> theres no other way?
[09:02] <rww> john_anderson: Press Alt-F2 and run the gconf-editor program. Navigate to /apps/nautilus/desktop/ and check home_icon_visible.
[09:02] <mountx> oh no ... you can ... beat me to it
[09:02] <jim_p> rww, got me!
[09:03] <john_anderson> i found it by searching
[09:03] <john_anderson> thank you!!
[09:03] <john_anderson> i mean searching the net
[09:03] <rww> john_anderson: no problem! did it show up right away after checking the box?
[09:04] <john_anderson> yes it did
[09:04] <john_anderson> thank you so much
[09:04] <john_anderson> another q
[09:04] <john_anderson> Maybe u can answer it
[09:05] <john_anderson> I am using the GForce Mx 44 video card..  will it be able to display the "3d desktop" thingy that ubuntu has
[09:05] <john_anderson> I dunno if i already have it, i might need to install
[09:05] <bazhang> john_anderson, compiz?
[09:05] <john_anderson> yeah
[09:05] <bazhang> john_anderson, help in #compiz-fusion
[09:05] <john_anderson> okay how would i install that anyway?
[09:05] <bazhang> !ccsm
[09:05] <arghh2d2> lol
[09:06] <arghh2d2> help in #compiz-fusion
[09:06] <rww> john_anderson: you might need to install the driver for it too, depending on your card. See https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia for that.
[09:06] <jim_p> john_anderson, since its nvidia, it will play even with the legacy drivers for your card. you may not have all effects though
[09:06] <john_anderson> okay!! cool
[09:06] <mountx> unomi ... any luck?
[09:06] <john_anderson> how big is the package (any ideas)
[09:06] <nite_johnboy> ! flash
[09:07] <ziv> does anyone used ruijie.exe(for win) with wine?
[09:07] <nite_johnboy> !restricted
[09:07] <rww> nite_johnboy: you can get ubottu information without speaking in channel with /msg ubottu !factoid
[09:07] <bazhang> !info compizconfig-settings-manager
[09:07] <john_anderson> what does ruijie do?
[09:07] <jim_p> john_anderson, no idea sorry :( either for compiz or the drivers
[09:07] <john_anderson> oh so its not that big
[09:07] <john_anderson> this is a 15 gb harddrive dont want to overload it with junk ;))
[09:07] <bazhang> john_anderson, using intrepid or hardy
[09:07] <john_anderson> hardy
[09:07] <mountx> that's a ton to linux
[09:08] <ziv> used to connect internet in edu lan
[09:08] <bazhang> john_anderson, check the restricted drivers to see if there is one for your card and visit the link above
[09:08] <nite_johnboy> rww; I thought it was okay to do this - i apologize - what is best way to find out this information I queried ?
[09:08] <rww> nite_johnboy: like I said, message the bot with /msg ubottu !flash (for example).
[09:09] <bazhang> no need for the !
[09:09] <nite_johnboy> rww; Ok 1st time someone said this will do in the future - thank you.
[09:10] <dreamer1> hi
[09:10] <dreamer1> how to map drive in ubuntu like the way in windows?
[09:11] <firestorm> Hi there. Complete newby who is trying to run the ruby code from http://www.omninerd.com/articles/Automating_Data_Visualization_with_Ruby_and_Graphviz     . Am getting an error '/usr/lib/ruby/1.8/rubygems/custom_require.rb:27:in `gem_original_require': no such file to load -- graphviz (LoadError)' although I have rubygems, libgv-ruby, graphviz, ruby deb packages installed. Any hints?
[09:11] <jiangwei> mount
[09:11] <jiangwei> ??
[09:12] <mountx> mount should work ... or if your a gui person ... Places > your drive
[09:12] <dreamer1> tried connect to server already i can access the shared folder but my problem it the program wont run
[09:13] <dreamer1> its a dos based program using clipper
[09:13] <jiangwei> the left side bar
[09:13] <dreamer1> with database access
[09:13] <mountx> not familiar w/ that ... could be that it's dos based
[09:13] <jiangwei> use dosbox?
[09:13] <dreamer1> dosbox?
[09:13] <olethri0s> Anyone know the command to view the ports and what's listening where?
[09:13] <arch3angel> hey i went to try that suggestions for the atheros wifi card and it says i need to disable the ath_pci in System > Administration > Restricted Drivers Manager
[09:14] <dreamer1> running on the network?
[09:14] <arch3angel> i dont see the restricted option under system and admin
[09:14] <sheep> olethri0s: sudo netstat -alp
[09:14] <mountx> wireshark
[09:14] <olethri0s> sheep: Ah, netstat - that was it! Thanks :)
[09:14] <Mimi> Does anyone know how to reconfigure my media *mouse* buttons? I've tried I dont know how many things, for months now...looking for new ideas :P
[09:15] <rww> arch3angel: it got renamed to "Hardware Drivers"
[09:15] <rww> !mouse | Mimi
[09:16] <dreamer1> help on mounting like the way in windows map drive
[09:16] <arch3angel> ahhh this would confuse a person
[09:16] <arch3angel> lol
[09:16] <jim_p> dreamer1, a network drive??
[09:16] <mountx> this is ubuntu not windows ... use mount or the gui
[09:17] <mountx> actuall it's linux not windows
[09:17] <Mimi> rww mmm ive tried the imwheel thing... no luck (mouse comes configured on install, but installing kubuntu effed up my buttons somehow)
[09:18] <dreamer1> Im using ubuntu but having problem on how to run clipper program
[09:18] <dreamer1> i have tried it in windows it does work if you have to map drive it
[09:18] <dreamer1> looking for solution for it to work in ubuntu
[09:18] <jiangwei> use
[09:19] <jiangwei> sdf
[09:19] <mountx> what does the prog. do?
[09:19] <jiangwei> use mount with cifs option?
[09:19] <Eutychus> i am installing kubuntu on a dell laptop with vista and the drive is already partitioned and the partition unallocated. how do i manually prepare the unallocated partition?
[09:19] <arch3angel> this line in the tut confuses me --> For further reference I needed to blacklist the ath_pci module and load the ath5k module
[09:19] <dreamer1> its an inventory system, with backend as foxbase
[09:20] <jiangwei> i'm confused with "the drive is already partitioned and the partition unallocated"
[09:20] <arch3angel> what are we typing to load ath5k
[09:20] <arch3angel> module
[09:20] <rww> !who | General note
[09:20] <jim_p> arch3angel, sudo modprobe ath5k
[09:21] <john_anderson> ty all
[09:21] <arch3angel> and to blacklist the ath_pci
[09:21] <jim_p> arch3angel, add it in /etc/modprobe.d/blacklist
[09:22] <arch3angel> so it is simply typing the info into the config
[09:22] <arch3angel> i thought this was something difficult :)
[09:22] <jim_p> arch3angel, well you actually write                    blacklist ath_pci           in there
[09:23] <arch3angel> cool - thanks - brb
[09:23] <Theaxiom> When was 8.10 released?
[09:23] <Flannel> Theaxiom: The end of October
[09:23] <Theaxiom> Flannel: Thanks, I am really behind the times, haha.
[09:24] <Flannel> Theaxiom: Ubuntu release numbers are year.month
[09:24] <whuffor> Could someone enlighten me why I am getting "undefined macro error" when I am trying to generate a configure file with autogen? http://pastebin.ubuntu.com/107261/
[09:24] <rww> Theaxiom: https://wiki.ubuntu.com/Releases for a full list of releases
[09:24] <Theaxiom> Flannel: Oh that is easy to remember then.
[09:24] <Flannel> Theaxiom: But, there's nothing syaing you have to upgrade from 8.04; you can stick with 8.04 until 10.04 comes out, and then upgrade directly to that (LTS).
[09:24] <Theaxiom> Thanks Flannel and rww
[09:25] <Theaxiom> Flannel: I will stay with the times. I like bleeding edge.
[09:25] <whuffor> It's been a while since I tried building from source. I'm guessing I either am missing some tool, or have a conflicting version of it
[09:25] <Vinceman> is linux completely virus proof?
[09:25] <mountx> no
[09:25] <rww> !virus | Vinceman
[09:25] <jim_p> Vinceman, completely
[09:25] <Theaxiom> Flannel: I am installing Windows Se7en tonight too. That is why I am upgrading Ubuntu.
[09:25] <obf213> yeah so im on wired and its equally slow
[09:25] <jim_p> Vinceman, vince... is that you?
[09:25] <mountx> but it's very resilient
[09:26] <Eutychus> can anyone help me?
[09:26] <jim_p> Eutychus, shoot!
[09:26] <rww> Eutychus: You should be given the option to manually partition during setup.
[09:26] <arch3angel> said: FATAL module ath5k not found
[09:27] <rww> Eutychus: Does that not happen? Or do you need help doing that or something?
[09:27] <jim_p> arch3angel, why?
[09:27] <Eutychus> i have been given the option. the disk is already patition vista in 37 and 37gigs free. if i choose the automatic it will partition down to vista 17 and kubuntu 17. i need to set it up manually.
[09:27] <Vinceman> hey jim_p
[09:28] <Eutychus> i am at prepare partions table.
[09:28] <PSiL0> hmmm, just experienced a system crash with amarok... 2nd time in two weeks..
[09:29] <arch3angel> i am thinking the madwifi was not install - think i skipped it to be honest
[09:29] <PSiL0> the crash occurs after reading an mp3 off of an ntfs sata drive connected via usb2
[09:29] <arch3angel> looking over it
[09:29] <balrog__> is there a way to get code::blocks to open up specific files in a project by default, even if there are more than one project in the workspace?
[09:29] <mountx> PS-- had problems w/ amarok also
[09:29] <PSiL0> usually occurs while running in the background
[09:29] <mountx> mostly network issues ... not sure why
[09:30] <PSiL0> yeah, connected to wifi via intel 4965(?)
[09:30] <jim_p> arch3angel, what ubuntu version are you on?
[09:30] <arch3angel> jim_p: what are the steps to install madwifi - i dont believe I have ever had to use them
[09:30] <PSiL0> the system locks up ala windows BSOD
[09:30] <arch3angel> 8.10 fresh install
[09:30] <mountx> dlink here
[09:30] <jim_p> arch3angel, then the ath5k module is included in the kernel
[09:30] <Mimi> How would I make Ubuntu "reconfigure" my mouse media buttons by itself? Because clearly, Ubuntu did it when I installed i... but now my mouse buttons don't work, and I'm sick trying to do it on my own
[09:30] <arch3angel> hmmm
[09:31] <arch3angel> wonder why it does not see it
[09:31] <rww> Eutychus: There are manual partitioning instructions at https://help.ubuntu.com/8.04/switching/installing-partitioning.html , if that helps. Again, it'd be nice if you'd be more specific. The Ubuntu (and Kubuntu) installer has an option for manual partitioning, and you haven't said whether you need help with it (or specific questions if you do).
[09:31] <PSiL0> mountx: supposedly this problem was fixed in hardy (after searching through some bug reports)
[09:31] <mountx> any luck on your part?
[09:31] <Eutychus> rww, thanx.
[09:31] <PSiL0> mountx: running amarok 1.4.10
[09:32] <mountx> yep same v. here
[09:32] <Rencx> how capture DV from video camera on ubuntu?
[09:32] <rww> Eutychus: (change 8.04 in that URL to 8.10 if you're using Intrepid, or the version number if you're using another version)
[09:32] <PSiL0> mountx: supposedly it was a ntfs-3g & SATA issue, but someone said that it was fixed in hardy (https://bugs.launchpad.net/ubuntu/+source/ntfs-3g/+bug/198533)
[09:32] <Eutychus> rww, k.
[09:32] <arch3angel> arch3angel, then the ath5k module is included in the kernel
[09:32] <arch3angel> opps - sorry
[09:33] <jim_p> Rencx, with some relevant app like LiVES
[09:33] <Dexi> >.> rww lol i still havent figured out that darn eggdrop issue :( lmao im DOOMED!
[09:33] <arch3angel> jim_p: suggestions since it wont find the ath5k
[09:33] <mountx> PSil8: ... I'm running intrepid ... don't think it's fixed ... random crashes and freezes ... network goes haywire while i'm running it
[09:33] <jim_p> arch3angel, does intrepid have madwifi package in its repos?
[09:33] <PSiL0> mountx:  I mean, I don't want to work on a project and risk losing my data while amarok is running
 colld you give me some links
[09:33] <rww> Dexi: I'd offer to test it myself, but I'm running Jaunty right now so what works for me wouldn't necessarily work for you.
[09:34] <mountx> Dexi ... f*** eggdrop
[09:34] <Dexi> mountx: .... >.> ?
[09:34] <Dexi> rww: lol np thanks anyway
[09:34] <rww> mountx: censored swearing is still swearing, and is still against the channel !guidelines
[09:34] <PSiL0> mountx:  Is it not fun to work in fear...  I hate to say it, but windoze xpsp3 is rock solid compared to 8.10 running amarok
[09:34] <jim_p> Rencx, i can only show you the app, nothing more. anyway, you will need a video editing app. lives is one, kino is another. let me find a url
[09:34] <mountx> sorry ... will refrain
[09:34] <Dexi> mountx: i take it you dislike eggdrop?
i cant do it in Kino
[09:35] <mountx> I don't like amarok although it reads my Ipod ... songbird is coming along o.k. but still not there
 in add remove programs i cant find lives
[09:35] <PSiL0> mountx:  I did not see anything wrong with my network connection prior to the system crash.. strangely, the logs of events surrounding the crash are absent
[09:35] <mountx> nope .. eggdrop has caused me more problems than benefits
[09:35] <jim_p> Rencx, lives has its own repo i think
[09:36] <Dexi> mountx: i used it on windows without any problems before... heh now i cant seem to get bmotion to work
[09:36] <arch3angel> i was reading somewhere that i need to install special drivers for the via graphics card something about Chrome 9 or something - anyone have an idea about this?
[09:36] <ari_stress> hi guys, do you think it's possible to create cron job that will run on every other saturday? (every two weeks)
[09:36] <Dexi> mountx: and it only signs onto a server if i use -n
[09:36] <PSiL0> including log of a kdm crash that occurred earlier, albeit when I had a ton of background processes and java vm's running
[09:36] <mountx> PSiL0 -- all my probs have started w/ network
[09:37] <jim_p> Rencx, http://lives.sourceforge.net/
[09:37] <Col_Forbin> hello.  does anyone know how to configure proxychains?
[09:37] <mountx> I'm running a dlink card like I said ... and eventually have to kill amarok before network goes down
[09:37] <ferrariii> hey i have tried to create a new workspace using the existing window manager on the host.. but i'm unable to do it .. .somebody please help me
[09:37] <PSiL0> mountx: interesting.. yeah, I experienced kernel panics with my intel wireless chip until I updated the kernel from backports
[09:37] <kante> hello everyone! Guys, I need some help. I have a .cue+.flac Audio CD image and I need to exctract the songs. I did that somehow some time before, but I can't remembder. I think I used k3b, but I can't realise how exactly. Help please!
[09:38] <mountx> anyone ideas on amarok and wifi?
[09:38] <PSiL0> kante:  shntool split -f filename.cue -o flac filename.flac
[09:39] <PSiL0> mountx: hmmm, in regards to my wireless and amarok, I never experienced anything like that..
[09:39] <kante> PSiL0 thanks man! but is there a GUI tool to do that?
[09:39] <arch3angel> SWEET works - THANKS everyone!!!!
[09:39] <PSiL0> kante: I don't know.. it worked easily enough for me using CLI
[09:40] <kante> Thanks again
[09:40] <PSiL0> kante: good luck finding a gui program for that
[09:41] <Schmidt> Can anyone recommend a external (USB) sound card. I need at least 2 outputs (stereo system and headphones).
[09:41] <mountx> PSiL0: there it goes ... mem usage is skyrocketing
[09:41] <PSiL0> it is frustrating that I can't even see the logs of the events surrounding my system crash due to amarok &>(
[09:42] <mountx> me neither
[09:42] <PSiL0> mountx: I was about to ask if you had firefox running, lol
[09:42] <mountx> i do
[09:42] <a_> hi
[09:42] <mountx> but nothing major ... just reddit, which has been fine .. you?
[09:43] <kante> PSiL0: I think that gCue2Tracks is a GUI for shntool
[09:43] <kante> I've googled it out
[09:43] <PSiL0> kante:  hmm, sounds promising...
[09:43] <PSiL0> mountx: have about 10 tabs open -> 355Mb used
[09:44] <PSiL0> however, I usually have 20, 30 open and memory usage hovers to around 1Gb
[09:45] <mountx> PSiL0, not that much ... just 3 tabs .. got 4 gig mem though
[09:45] <ferrariii> hey i have tried to create a new workspace using the existing window manager on the host.. but i'm unable to do it .. .somebody please help me
[09:45] <PSiL0> mountx: 3Gb here
[09:46] <DwightShroot> whats the command to import a file into the directory navigated to
[09:46] <PSiL0> mountx: did you check if there were any bugs reported on your problem?
[09:46] <mountx> PSiL0, did ... couldn't find anything notable
[09:46] <DwightShroot> no i fell asleep
[09:47] <mountx> PSiL0, you?
[09:47] <DwightShroot> but i navigated back into my iphone, i just want to import i file into it
[09:47] <DwightShroot> ...from off my desktop
[09:47] <PSiL0> mountx: hmmm I don't know if it applies to your d-link, but I found one that helped me with my kernel panics caused by my intel 4965
[09:47] <PSiL0> hold on..
[09:48] <mountx> speaking of phones .. anyone succeed w/ an blackberry on ubuntu 8.10 wine/virtualbox?
[09:48] <rww> DwightShroot: cp ~/Desktop/filename /path/to/iphone/
[09:48] <rww> DwightShroot: assuming I'm understanding you right.
[09:49] <mountx> is your intel atheros based?
[09:49] <PSiL0> the kernal panics made balooned all fo the systems log... thankfully, I originally had /var/logs/ as a separatin partition
[09:49] <PSiL0> mountx: nope
[09:49] <PSiL0> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/286285
[09:49] <DwightShroot> rww: i think its there but off, i opened a terminal on the desktop put in ssh root@<ip> to get into the iphone and navigated through
[09:51] <five_> hello
[09:51] <rww> DwightShroot: oh, you're connecting over ssh? You'll need to use scp then. Run the following on your computer: scp ~/desktop/filename root@<ip>:/path/to/iphone/destination/
[09:51] <Peleus> Hi all - I've having an issue with my sound. It is extremely low, even when at full master volume. I'm on an Asus laptop, any idea's?
[09:51] <arch3angel> anyone good with via chrome video stuff
[09:52] <Guest11697> i just did a fresh install of ubuntu 8.10, i installed compiz and my desktop does not show any icons, also compiz animations are not affecting my menu but does affect my windows
[09:52] <mountx> hey Dwight -- have you tried rsync?
[09:53] <new_to_ubuntu-> how to run swat?
[09:53] <aeosynth> Guest11697: make sure visual effects are set to normal or extra
[09:53] <PSiL0> mountx: or it could be firefox causing the system freeze
[09:53] <rww> new_to_ubuntu-: https://help.ubuntu.com/community/Swat
[09:54] <DwightShroot> rww: whats scp??
[09:54] <PSiL0> mountx: I mean, both amarok and firefox were running at the same time when the hard freezes occur
[09:54] <PSiL0> hmmm
[09:54] <mountx> yeah .. .could be ... I'm a developer and firefox has been known to cause issues
[09:54] <rww> DwightShroot: It stands for Secure Copy. It copies files over an ssh connection.
[09:55] <Guest11697> aeosynth, its set to extra my desktop cannot be right clicked or anything, if i reload window manager then i loose panels as well
[09:55] <mountx> PSiL0, firefox is 'supposed' to be free from these mem errors though
[09:55] <rww> mountx: firefox is supposed to have that fixed. Some Firefox addons, on the other hand, still cause ridiculous memory problems.
[09:56] <lid> fuck
[09:56] <rww> !ohmy | lid
[09:56] <mountx> rww, know anything about firebug causing problems?
[09:56] <aeosynth> Guest11697: sorry, that was my only idea :(
[09:56] <PSiL0> rww: which I have quite a few
[09:56] <rww> mountx: I don't use addons, so I wouldn't know. Sorry :(
[09:56] <NET||abuse> Hi guys... so i'm having issue with the idea of dragging links to your desktop does not allow alot of programs to run,, example, i downloaded the app from processing.org, i want to get my little brother to learn it as an intro to prorgramming, I alt dragging to the desktop and mak a link to the processing executable script does not work as it is not in the right directory,, the java app dies with "could not find the main class: processing.ap
[09:57] <mountx> PSiL0, firebug? That and download statusbar is all I have
[09:57] <vinja-sheep> Do Ubuntu need totem + totem-plugins?  I'm considering to purge them.
[09:57] <lid> is icedtea like gcj
[09:57] <mountx> Wait ... brings up a good point ... i've had probs w/ smplayer
[09:58] <PSiL0> mountx: really?
[09:58] <PSiL0> hmm
[09:58] <lid> why did I end up with a full install of icedtea when I just asked for a java firefox plugin
[09:58] <aeosynth> my default profile is wrecked, I'm thinking of just moving all the files into a new profile and starting over with that one. is there an easier way to do this/ can I reset my default profile somehow?
[09:58] <lid> was there an easier way to java firefox plugin from a default install
[09:58]  * lid is ignored by everyone
[09:58] <jxander> is there a way to switch between xorg.conf files at boot or login in case there is an external lcd panel connected to the laptop or not?
[09:58] <rww> lid: icedtea is required for the open-source java plugin.
[09:58] <rww> !patience | lid
[09:59] <mountx> PSiL0, it's been spotty ... thought it was solid for awhile then it went crashing to the ground
[09:59] <mountx> PSiL0, going to remove and see if I can run amarok
[09:59] <PSiL0> mountx: sounds like a plan, good luck!
[09:59] <lid> many believe firebug is evil due to its adverts
[09:59] <mountx> bb
[10:01] <lid> then there was that huge xssbug
[10:01] <Yann1> Wenn I try to launch Acrobat Reader on my 64-bit ubuntu I get the following error:
[10:01] <Yann1> terminate called after throwing an instance of 'ASErrException'
[10:01] <Yann1> Aborted
[10:01] <Yann1> I don't know what this means but it worked before. I removed acroread, installed the version from the medibuntu repros and checked the 32-bit dependencies but it doesn't helped :(
[10:01] <FloodBot2> Yann1: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[10:01] <lid> ^xss bug
[10:02] <gldtn> hello
[10:02] <mikevankuik> How can I log userlogin's?
[10:02] <gldtn> anyone here that knows about php?
[10:03] <mountx> PSiL0, sofar so good
[10:03] <lid> ‮why is everything on the screen suddenly backwards
[10:03] <vinja-sheep> rww: Icedtea are required for open-source java plugin.  How about totem-mozilla?  I'm trying to figure out if I do need totem since vlc is reliably reliable.
[10:03] <mikevankuik> gldtn: sure but best if you ask in #php they know everything about it in there :)
[10:04] <PSiL0> mountx: still, it sounds like a serious problem.. you should open up a bug report
[10:04] <lid> ‮seriously, why is it doing this to me in xchat
[10:04] <gldtn> mikevankuik: ok will do.. thanks
[10:04] <mikevankuik> gldtn: np
[10:04] <PSiL0> mountx: unfortunately, I'm not the most technical person around (busy scouring bug reports for my problems :()
[10:05] <mountx> PSiL0, will do ... I don't see how smplayer is causing amarok to crash .. but it apparently it is
[10:05] <mikevankuik> Anyone know if Ubuntu logs the userlogins? and if I can find a log of that anywhere?
[10:05] <mountx> PSiL0, same here ... got a bug tracker of my own ... but hey ... it worked
[10:06] <mountx> glad to say it ... that was my only real prob. w/ linux
[10:06] <PSiL0> mountx: glad to hear that... well, I'm running kubuntu here.. and I had bouts with smplayer locking the audio up
[10:06] <PSiL0> before
[10:06] <Rencx> why my kino cant capture video from camera?
[10:06] <PSiL0> particularily while running banshee
[10:07] <quibbler> mikevankuik, look here: http://www.cyberciti.biz/faq/ubuntu-linux-gnome-system-log-viewer/
[10:08] <mountx> PSiL0, smplayer seems very touchy ... anyone have a good replacement besides totem for it?
[10:09] <aeosynth> my default profile doesn't work, should I just create a new profile and transfer all of the files into that one?
[10:09] <squishywalrus> i <3 vlc
[10:09] <mountx> I use vlc ... but for quicktime etc...
[10:09] <djyoung4> vlc is awesome
[10:10] <Eutychus> can i create a home partition later instead of at installation?
[10:10] <PSiL0> mountx: i use mplayer here.. again, I don't think that it is a solution to your problem..
[10:10] <mountx> smplayer is just the frontend for mplayer i think
[10:10] <djyoung4> wouldnt use any thing else
[10:11] <Guest28196> ok, ive installed comppiz and my window borders are missing, compiz animations do no affect the menu places system buttons on the top panel, if i reload window manager panels and desktop dissappear
[10:11] <Guest28196> before i re installed ubuntu all of this was working great any ideas?
[10:11] <mountx> dyoung, do you use vlc for qucktime embedded and how?
[10:12] <Helloeweo> Hi Please help, cannot start my Kubuntu 8.10 - "checking battery state" error im using laptop Latitude D620
[10:12] <mountx> Hey Helloeweo ... I had that problem w/ a Inspiron ... but it offered an option to bypass
 to continue
[10:13] <Helloeweo> mountx, any suggestion?
[10:13] <mountx> i think
[10:13] <euro-linux> hola
[10:13] <mountx> which v. of linux?
[10:13] <euro-linux> server en espanol
[10:13] <Helloeweo> kubuntu 8.10
[10:14] <DwightShroot> rww: i keep getting a no such file destination for the part in () ﻿﻿scp ( /Desktop/Zelda2 ) root@192.168.1.46:/var/mobile/Media/ROMs/NES
[10:14] <djyoung4> got help from my friend cant quite remember what he did though
[10:14] <djyoung4> sorry
[10:14] <Helloeweo> <enter? <enter> does not work
[10:14] <Flannel> !es | euro-linux
[10:14] <mountx> not sure about kubuntu .. it def. happens w/ mint which is basically 8.10
[10:15] <dubi> hello can someone help me? i cannot eject my dvdrom, something about a process involved? plssss
[10:15] <mountx> push the button dubi
[10:15] <Gotu> hi, can you please tell me how to run keygen.exe from terminal
[10:15] <Helloeweo> mountx, isee,
[10:15] <dubi> mountx: it still wont
[10:15] <djyoung4> pop it open with a knife
[10:15] <ryg9I> dubi: umount it
[10:15] <piolo> to connect from A to C via ssh , I need to connect to B first. "ssh B 'ssh C' " doesn't work. Any hint?
[10:15] <ryg9I> Gotu: wine
[10:16] <dubi> ryg9I: ok how?
[10:16] <mountx> djyoung4, thats what i do .. but my gears are broke .. yours?
[10:16] <ryg9I> dubi: sudo umount /cdrom
[10:16] <ryg9I> dubi: or just eject
[10:17] <suji> how to know how many and which operating systems are in my system using command?
[10:17] <dubi> device is busy
[10:17] <djyoung4> yeah i just yank it open now
[10:17] <dubi> but i am not using it - but it says its busy...strange
[10:17] <dubi> it says something about lsof
[10:17] <ryg9I> dubi: lsof | grep -i cdrom
[10:17] <djyoung4> open it then
[10:17] <Gotu> actually i have installed dreamweaver in wine but now it wants key to access and i want to run keygen.exe...but it says       err:module:LdrInitializeThunk Main exe initialization for L"Z:\\opt\\micromedia\\FIX\\keygen.exe" failed, status c0000135
[10:19] <suji> any one know how to know how many operating systems are in my system through terminal:'(
[10:19] <balrog__> Gotu: you are unlikely to receive support for pirated software in here.  you may have a higher likelihood of receiving help at #winehq, but you should buy a legal copy of dreamweaver if you want to use it.
[10:19] <dubi> it says bash 8389 dubi cwd DIR 11,0 2048 2304 /media/cdrom0
[10:20] <djyoung4> o i just burped up something that tasted like a frog
[10:20] <ryg9I> dubi: try to close all opened terminals
[10:20] <bill-nz> !topic
[10:20] <tahpot> i have an intel 915 graphics card, doing a glxgears gives me 150fps and glxinfo says i'm using mesa, how do i upgrade my graphics driver?
[10:20] <ryg9I> dubi: or just kill -9 8389 )
[10:21] <dubi> ryg9I omg it worked
[10:21] <mib_u5h4so34> tahpot have you got a pci-e port?
[10:21] <dubi> thanks ryg9I
[10:21] <ryg9I> )
[10:21] <aeosynth> how do i create a user with the same access/priveleges as the default profile?
[10:21] <tahpot> mib: i don't know? it's a laptop
[10:21] <djyoung4> do u have something in ur dvd drive dubi
[10:22] <Milk_Rulz> Does anybody know how I can go about installing my Microsoft VX-1000 webcam?
[10:22] <p4ng3r4n> alow
[10:22] <dubi> djyoung yes master of orion 3 - i just took cd 1 out
[10:22] <mib_u5h4so34> tahpot in that case you would be stuck with the 915 graphics, i thing theres a 915 package in the repos
[10:22] <mountx> Hey Milk_Rulz : You might try cheese .. what are you trying to use it with
[10:22] <djyoung4> nice
[10:22] <tahpot> i've googled and found people getting 1000fps etc with same chipset, but i don't know how they installed a different driver - or got xorg to use it
[10:22] <Milk_Rulz> I tried EasyCam2
[10:22] <Milk_Rulz> but that didn't do anything
[10:23] <mountx> do an apt-get install cheese ..i think u have to have media ubnutu installed though
[10:23] <aeosynth> what groups do i need to include to create a new user with the same access as the default profile?
[10:23] <quibbler> Milk_Rulz, look here: http://ubuntuforums.org/showthread.php?t=942915
[10:23] <Flannel> aeosynth: admin is the big one
[10:24] <denny> aeosynth: you mean being able to sudo?
[10:24] <Flannel> aeosynth: but, you can type 'groups username' to list the groups
[10:24] <aeosynth> denny: yeah
[10:24] <mountx> yes ... of course ... cause everyone runs as sudo
[10:24] <rdw200169> hmmm... i kill Network Manager and all of a sudden my network performance skyrockets... hm....
[10:24] <piolo> Hi *. to connect from A to C via ssh , I need to connect to B first. "ssh B 'ssh C' " doesn't work. Any hint?
[10:24] <aeosynth> Flannel: I'll try that
[10:24] <bill-nz> has anyone had any problems with the latest nvidia drivers?  my x servers been messed up ever since i updated.  I even reinstalled the OS but i'm not getting any love
[10:25] <mountx> rdw200169,  ... i don't use network manager either
[10:25] <elostio> tahpot: i got about 1000 fps
[10:25] <rdw200169> mountx: i was trying the 0.7 release on hardy and got really angry with it
[10:25] <denny> aeosynth: http://www.linux.com/articles/54945 #5
[10:25] <rdw200169> mountx: so i got rid of it, and did the darn thing myself in iwconfig
[10:25] <tahpot> elostio: how? what do i need to do? i've got a new clean install of 8.10
[10:25] <mib_u5h4so34> tahpot thats a very old gpu, you could get better framerates possably lowering to 16 bit color
[10:26] <rdw200169> note to self: never *ever* do a /etc/init.d/dbus restart
[10:26] <oscurochu>  I have installed guarddog, and now I can't connect to the internet (unless I disable it) :( Can someone please help me configure guarddog
[10:26] <balrog__> anybody know of a downthemall type of extension or addon for opera?
[10:26] <mountx> iwconfig is great is it not?
[10:26] <rdw200169> mountx: it... gets the job done
[10:26] <Photoguy> How can I unzip .rar files?
[10:26] <anonymous> I am not sure if this is the right place to ask this question, but how can fdisk be used to format a disk drive and make it look larger than it is?
[10:27] <rdw200169> mountx: at least i know that with iwconfig, it's not gonna give me heck for wanting to put in a ascii wep key
[10:27] <anonymous> Photoguy - sudo apt-get install unrar
[10:27] <Photoguy> oK
[10:27] <mountx> rdw200169, or in monitor mode
[10:27] <elostio> tahpot i dont really know, im running 8.04
[10:27] <rdw200169> mountx: you mean promiscuous mode... hehe
[10:27] <oscurochu> anonymous, you can't make a disk drive "look" bigger than it's maximum size.
[10:27] <djyoung4> anybody use dvorak
[10:27] <rdw200169> mountx: you must know about the ip command
[10:28] <dubi> awesome: just tested master of orion 3 on wine and it works! :)
[10:28] <mountx> rdw200169, haha ... good call
[10:28] <bill-nz> anonymous: i think you're thinking of partman - the partition manager
[10:28] <anonymous> oscurochu - what about the fake USB drives and MP4 player being sold on eBay? Is that a hardware modification?
[10:28] <mib_u5h4so34> anonymousit generally cannot but cheap fake chinese usb drives do this by reprogramming the usb controller to report more memory than actually populated in the thumb drive.
[10:28] <Milk_Rulz> quibbler are you still there?
[10:28] <elostio> tahpot: i think its actually some kind of bug, i dont think my values are correct
[10:28] <jadamcze> what package will get me /usr/include/GL/xmesa.h ?
[10:28] <quibbler> Milk_Rulz, yes
[10:29] <gamla_kossan> mib_u5h4so34: huh. you learn something new every day. =)
[10:29] <Milk_Rulz> what does it exactly mean by "extract and change directory"?
[10:29] <Milk_Rulz> do I just extract anywhere?
[10:29] <anonymous> mib_u5h4so34 - okay :) do you have any idea how to do that, or what I should search for?
[10:29] <whuffor> Can someone assist with a configure problem when trying to build libtorrent? I am getting "No package 'openssl' found
[10:29] <rdw200169> mountx: it just kills me thought, that NetworkManager sucks sooo bad.  not for me, mind you, but for the people that shouldn't need iwconfig and the like...
[10:29] <gamla_kossan> whuffor: well, you obviously miss the openssl package =)
[10:29] <rdw200169> mountx: you know, our target audience...
[10:30] <gamla_kossan> whuffor: try apt-get install openssl openssl-devel
[10:30] <mountx> Milk_Rulz, ... just because your name is cool and I'm really craving milk right now ... extract means extract all the files in a archive and change to the directory they were archived in
[10:30] <tahpot> elostio: ive now changed to using i810 driver instead of intel one and get 7430 fps, but get screen artifacts :( damn
[10:30] <whuffor> I'm trying to build libtorrent from source and starting with ./configure and am getting this: http://pastebin.ubuntu.com/107272/
[10:30] <mib_u5h4so34> anonymous search on fake sony 16gig thumb drives as trhere are enough out there people have been burned buying, and there is a utility to reset some.
[10:30] <Gotu> -j #winehq
[10:30] <whuffor> gamla_kossan: openssl is installed and in the path
[10:30] <mountx> rdw200169, i deal with it constantly
[10:30] <Photoguy> Will Unrar also do 7zip files too?
[10:30] <anonymous> Thanks mib ;)
[10:30] <gamla_kossan> whuffor: try apt-get install openssl-devel
[10:31] <Milk_Rulz> mountx, do you think you could explain it in idiot terms for me? :P
[10:31] <whuffor> gamla_kossan: It's some issue with pkg-config not registering the openssl package
[10:31] <ziroday> whuffor: you done sudo apt-get build-dep libtorrent?
[10:31] <rdw200169> mountx: there should be a massive bounty for a better NetworkManager!
[10:31] <Milk_Rulz> I have extracted the folder to my desktop
[10:31] <Milk_Rulz> what would I do next?
[10:31] <whuffor> ziroday: No I haven't I can try that.
[10:31] <mountx> rdw200169, yes yes yes
[10:31] <ziroday> Photoguy: IIRC, yes
[10:31] <quibbler> Milk_Rulz, after you extract you have to go to the directorty where it is extract to and continue with make etc
[10:31] <ziroday> whuffor: that should handle most of the dependancies
[10:31] <Photoguy> IIRC?
[10:31] <gamla_kossan> whuffor: well, unfortunately ubuntu isn't really that nice when it comes to compiling stuff. but anyway, like I said, try the openssl-devel package.
[10:31] <bill-nz> can anyone help me with an xorg problem? I updated my nvidia drivers last week and now the screen resolution is messed up.
[10:31] <mountx> Milk_Rulz, .. i don't know how to explain it better ... which part do you not understand though?
[10:31] <ziroday> Photoguy: If I Recall Correctly
[10:32] <oscurochu> Does anybody know how to configure guarddog in kde?
[10:32] <Milk_Rulz> well I've extracted the folder to the desktop
[10:32] <Milk_Rulz> do I go to desktop with terminal
[10:32] <elostio> tapoh, ok my values are actually correct...
[10:32] <whuffor> gamla_kossan: OK. I'll give it a whirl. Thanks for the help
[10:32] <mib_u5h4so34> Milk_Rulz are you attempting to compile and install a driver?
[10:32] <mountx> oscurochu, .... guardog has a guide somewhere but there are some other good firewall choices
[10:32] <Milk_Rulz> I think I'm attempting to install a driver
[10:32] <gamla_kossan> whuffor: no worries, let us know if it owrks yeah? =)
[10:32] <Milk_Rulz> for my webcam
[10:32] <rdw200169> mountx: have you tried finding any dev documentation on NetworkManager?  I have, it's garbage.  it doesn't do dbus introspection.  that, and 90% of the dbus methods they specify *never* work
[10:33] <Milk_Rulz> http://ubuntuforums.org/showthread.php?t=942915
[10:33] <sarka> jkl
[10:33] <whuffor> gamla_kossan: Will do. :)
[10:33] <Milk_Rulz> and I typed "make" in terminal
[10:33] <oscurochu> i've used firestarter in the past with no problems, but that is for gnome, right?
[10:33] <Milk_Rulz> and it gave me "No targets specified and no makefile found.  Stop."
[10:33] <Gotu> what should i write ..i want to go #winehq ?
[10:34] <Gotu> -j winehq
[10:34] <mib_u5h4so34> you will generally need to have build-essentual installed, then run config, make and makeinstall it should be in the documentatiion of the source you d/led
[10:34] <ziroday> Gotu: /join #winehq
[10:34] <Gotu> -j #winehq
[10:34] <djyoung4> yahoo set up chatrooms for hackers
[10:34] <ziroday> Gotu: not - you need a /
[10:35] <ziroday> djyoung4: do you have a question we can help you with?
[10:35] <mountx> rdw200169, not really ... found another app that connects to most wifi connects at full speed ... replaces networkmanager ... havent put it on this machine yet ... but backtrack is always good
[10:35] <Milk_Rulz> I'm still lost :(
[10:35] <Gotu> a / #winehq
[10:35] <rdw200169> mountx: what's it called?
[10:35] <Gotu> i have opened tat room :)
[10:35] <ziroday> Gotu: then go to it
[10:36] <djyoung4> my wireless card doesnt work
[10:36] <quibbler> Milk_Rulz, look here http://www.ubuntugeek.com/how-to-install-source-files-in-ubuntu.html
[10:36] <mountx> trying to remember ... it's on my bros computer b/c he was having severe problems w/ wireless ... but he's asleep and I don't have access to it right now
[10:36] <Photoguy> For some reason my usb drive is locked, it only allows read.
[10:36] <ziroday> !compile | Milk_Rulz
[10:36] <ziroday> Milk_Rulz: you will probably need to ./configure first
[10:37] <mountx> ./configure && make && make install
[10:37] <mountx> usually does it
[10:37] <bill-nz> Photoguy: make sure that there isn't a switch on the drive that locks it
[10:37] <quibbler> Milk_Rulz, or here: https://help.ubuntu.com/community/CompilingEasyHowTo
[10:37] <Milk_Rulz> ahhh so many voices
[10:37] <Milk_Rulz> :P
[10:37] <Milk_Rulz> so
[10:37] <Milk_Rulz> first
[10:37] <ziroday> mountx: it would be sudo make install and its advised to do it one by one to catch errors
[10:37] <FloodBot2> Milk_Rulz: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[10:37] <Milk_Rulz> I'm opening terminal
[10:37] <rdw200169> mountx: dang
[10:37] <Milk_Rulz> and I'm typing "/config?...
[10:37] <Photoguy> bill-nz, no there isn't.
[10:37] <mountx> goku runs as root
[10:37] <Milk_Rulz> (sorry about the flood)
[10:37] <mountx> shouldn't you
[10:38] <djyoung4> need help
[10:38] <ziroday> mountx: running as root is not advised.
[10:38] <whuffor> ziroday: Thank you. That took care of the dependencie. ./configure works without errors now
[10:38] <ziroday> whuffor: great!
[10:38] <whuffor> gamla_kossan: openssl-devel can't be found :)
[10:39] <whuffor> but all seems to work now. :)
[10:39] <Photoguy> How do I allow file copying and deleting on a usb drive?
[10:39] <quibbler> Milk_Rulz, got to go....hope you solve the problem.
[10:39] <ziroday> Photoguy: how did you mount it?
[10:39] <mountx> ziro is right ... for those that have stomachs and hd's that are not backupable ... you should not run as root
[10:39] <Photoguy> I'm didn't, just plugged it in.
[10:39] <Photoguy> *I
[10:40] <ziroday> mountx: you should never run as root. Recommending it is not a good idea either
[10:40] <Guest_708> Anyone about able to tell a noob how to remake a swapfile? Hibernated ubuntu, and since then i get stuck without a gui, error message being no resume image found etc
[10:40] <mountx> i didn't
[10:40] <ziroday> Photoguy: okay, try do sudo chmod ugo=rwx /media/<thumbdrivename>
[10:40] <mountx> i was pointing out the fact that most people run as root
[10:40] <mountx> b/c afterall it is there system
[10:40] <ziroday> mountx: most people don't and shouldn't
[10:40] <mountx> not true
[10:40] <mountx> everyone I know does
[10:41] <djyoung4> i need help with wireless card
[10:41] <Photoguy> ziroday, sorry, how do I find the actual name of the disk?
[10:41] <mountx> and everyone they know does
[10:41] <bill-nz> can anyone tell me where the monitor is defined in xorg now?  I can't find anything in the xorg.conf file, and most of the definitions seem to not be in there anymore
[10:41] <Boohbah> mountx: that defeats the purpose of having privilege separation, doesn't it?
[10:41] <ziroday> Photoguy: no problem, open up a file manager go to Filesystem and then click /media, look for your disk thats the name
[10:41] <mountx> no
[10:42] <ziroday> mountx: well everyone I know doesn't. Look I am not going to argue why enabling root is  a bad idea. If you want to argue we can in #ubuntu-offtopi
[10:42] <Photoguy> Is "2.0 GB Media" a correct name?
[10:42] <mountx> it defeats the purpose of having control over YOUR system
[10:42] <ziroday> Photoguy: hmm not really, it should have no spaces in it. Can you pastebin the output of ls -l /media please
[10:42] <djyoung4> help
[10:43] <Photoguy> Ok.
[10:43] <Photoguy> Hold on
[10:43] <Boohbah> !ask | djyoung4
[10:43] <ziroday> Photoguy: no problem
[10:43] <mountx> ziro ... your right ... this up for everyone else to decide ... issue dropped
[10:43] <Boohbah> djyoung4: what sort of wireless card? lspci -v
[10:43] <Myrtti> mountx: we kindly ask you not to suggest enabling root on this channel though.
[10:44] <mountx> you serious
[10:44] <mountx> it's IRC
[10:44] <ziroday> !noroot | mountx
[10:44] <Photoguy> ziroday: http://pastebin.com/m47814385
[10:44] <mountx> dude quit being a VAG ... and run as root
[10:44] <ziroday> Photoguy: thanks!
[10:44] <Myrtti> mountx: yes.
[10:44] <ziroday> Photoguy: would Daniel's Stuff be it?
[10:45] <Myrtti> mountx: excuse me?
[10:45] <Photoguy> No..
[10:45] <mountx> screw up your system ... fix it .. and tell everyone here new .. how you did it
[10:45] <Photoguy> Maybe the "disk"?
[10:45] <Oni> Anyone about able to tell me how to remake a swapfile?  Hibernated my laptop and now im stuck with a terminal every time i boot up, can't get back to GUI
[10:45] <ziroday> Photoguy: yeah probably
[10:45] <Photoguy> Daniel's stuff is a 500gb
[10:45] <megarom> ello all
[10:45] <tokyoahead> hi all... what package do I have to install to sync windows mobile with ubuntu?
[10:45] <Photoguy> Ok
[10:45] <megarom> i wonder how to fix hdmi sound
[10:45] <mountx> megraom ... run lspci
[10:45] <megarom> any pothead knows who ?
[10:45] <ziroday> Photoguy: so sudo chmod ugo=rwx /media/disk should do it
[10:45] <mountx> in terminal
[10:45] <megarom> okey
[10:45] <megarom> i'll pastebin
[10:46] <Photoguy> Thanks, I'll try it.
[10:46] <djyoung4> i have already asked a bunch of times my wireless card will not work in LiveCD's of 8.04 and 8.10.  will it work if i install
[10:46] <Oni> Anyone about able to tell me how to remake a swapfile?  Hibernated my laptop and now im stuck with a terminal every time i boot up, can't get back to GUI
[10:46] <Myrtti> !hardware | djyoung4
[10:46] <ziroday> tokyoahead: are you using evolution for all your PIM needs?
[10:46] <Myrtti> Oni: look up for the command "swapon"
[10:47] <Oni> as in --help swapon ?
[10:47] <Myrtti> Oni: man swapon or swapon --help
[10:48] <Oni> Myrtti: Ok i'll give that a go =) ty
[10:48] <djyoung4> my hardware is on there but still wont work
[10:48] <mountx> megarom ... you probably need to remove pulse and recompile ALSA from source ... usually that fixes it
[10:48] <Photoguy> ziroday, it does this: http://pastebin.com/m105d3778          then still is read only.
[10:48] <ziroday> tokyoahead: also look at the package synce-sync-engine
[10:48] <megarom> mountx:  do u got instructions on howto just do that ?
[10:48] <mountx> which part
[10:48] <megarom> all of the above ;)
[10:48] <ziroday> Photoguy: ah right, does the USB drive work on other computers? Can you read it there?
[10:49] <Photoguy> I didn't try..
[10:49] <megarom> http://rafb.net/p/jA5lEy19.html
[10:49] <megarom> thats the paste mountx
[10:49] <mountx> only if you promise not run as root? --- promise?
[10:49] <Milk_Rulz> mountx!
[10:49] <ziroday> Photoguy: does it have a little "lock" mechanism on it?
[10:49] <Milk_Rulz> I'm doing it!
[10:49] <Milk_Rulz> :D:D:D
[10:49] <tokyoahead> ziroday: thanks
[10:49] <bill-nz> anyone have an idea how i can fix my monitor resolution?  it's no longer being detected automagically after lastest nvidia update
[10:49] <Gotu> if i use wine which gives functionality of window on linux...then what is the difference using linux over window...can u plz tell me
[10:49] <megarom> hmm okey dandy ... --promise added as configuration paramùeter4
[10:50] <Photoguy> ziroday, no lock, works on a Windows pc.
[10:50] <mountx> ok ... pulse removal is simple ... sudo apt-get remove pulse
[10:50] <Oni> Myrtti: ok I tried man swapon, it did something but I'm not experianced enough to understand what it suggests. An online forum post i found with the same problem said his issue was fixed by "remaking the swap file"
[10:50] <ziroday> Photoguy: hmm, well I really don't know then sorry. A simple USB drive should be fine unless it has some strange file system
[10:50] <mountx> or if you get an error try apt-get remove pulseaudio
[10:51] <ziroday> tokyoahead: oh and multisync!
[10:51] <megarom> mountx: --promise as configurated on my kneesReading state information... Klaar
[10:51] <megarom> E: Kon pakket pulse niet vinden
[10:51] <evowill_> megarom, I found the directions in this post helpful http://ubuntuforums.org/showthread.php?t=973637
[10:51] <Photoguy> Ziroday: when it first comes up, it's normal, but when I drag/drop, it shows a lock icon on all the folders.
[10:51] <Milk_Rulz> will I have to use make very often?
[10:51] <piolo> Hi *. to connect from A to C via ssh , I need to connect to B first. "ssh B 'ssh C' " doesn't work. Any hint?
[10:51] <Photoguy> Ziroday, thanks for the help anyway.
[10:51] <megarom> thkx evowill
[10:52] <ziroday> Milk_Rulz: you shouldn't have to.
[10:52] <ziroday> Photoguy: Sorry :(
[10:52] <Milk_Rulz> Okay
[10:52] <Photoguy> :)
[10:52] <megarom> (Database inlezen ... 229011 bestanden en mappen geïnstalleerd.)
[10:52] <megarom> ubuntu-desktop wordt verwijderd ...
[10:52] <megarom> pulseaudio wordt verwijderd ...
[10:52] <megarom> oh crap it removed ubuntu-desktop
[10:52] <FloodBot2> megarom: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[10:52] <mountx> Photoguy ... that's not all he needs to do
[10:52] <evowill_> megarom, I will send you a PM
[10:52] <Photoguy> What?
[10:52] <Gionne> hello. how can i use grep to search all files with .lyx extension and return the ones that contain the "Fourier" word?
[10:52] <Myrtti> megarom: it's only a virtual package
[10:53] <mountx> damn you went german on me
[10:53] <Oni> Myrtti: ok I tried man swapon, it did something but I'm not experianced enough to understand what it suggests. An online forum post i found with the same problem said his issue was fixed by "remaking the swap file"
[10:53] <Photoguy> mountx, you have a suggestion?
[10:53] <megarom> lol mountx
[10:53] <megarom> its dutch
[10:53] <Myrtti> Gionne: for file in `locate .lyx`;do grep Fourier $file;done
[10:53] <Myrtti> Gionne: you might want to adjust the stuff in grep
[10:54] <Gionne> ok thanx
[10:54] <mountx> sorry ... not up on my foreign language
[10:54] <megarom> so mountx could u care to state those conditions again ./.. those that lead to audio over hdmi
[10:54] <mountx> ok do an alsamixer in terminal
[10:54] <megarom> i removed pulse
[10:55] <Guest_708_> #ubuntu
[10:55] <sleepy_cat> does someone have any idea which room should i go for RIA
[10:55] <mountx> what do you see?
[10:55] <megarom> okey in alsamixer
[10:55] <sleepy_cat> rich internet application
[10:55] <megarom> bar and foo
[10:55] <sleepy_cat> embeb a browser in win32
[10:55] <sleepy_cat> appl
[10:55] <megarom> i see foobars
[10:56] <Photoguy> Is there a closed captioned DVD player for Ubuntu?
[10:56] <mountx> do you see some mixer type things?
[10:56] <evowill_> sleepy_cat, #windows would be a good start
[10:56] <rdw200169> mountx: i'm starting to wonder if it wasn't my internet connection that sucked, but instead something in my /proc settings for networking
[10:56] <megarom> mountx: what must i do again in alsamixer ?
[10:56] <sleepy_cat> thanks
[10:56] <megarom> yes bars and foo content
[10:56] <oCean_> I'm on friends laptop. There is no video output (from mplayer or totem) while playing avi. HW is Intel Corp Mobile 4 Series Chipset Integr graph controller. Uses "intel" in xorg.conf, glxgears/glxheads work fine. No errors, just no video output. Suggestions?
[10:57] <mountx> megarom, just checking to see if you have anything there
[10:57] <mountx> you don't have any mixer or anything that you can adjust levels on?
[10:57] <Onide> Can anyone tell me how to "Remake a swapping File" ? I found a forum user with same problem as me - Unable to load the GUI , and it said thats what he did to fix the problem
[10:57] <megarom> i have lots of foobars indictating volumes
[10:57] <mountx> rdw200169, could be ... is everything working o.k. now?
[10:58] <rdw200169> mountx: yeah, i'm hitting 8M on speedtest, freakin' straing
[10:58] <rdw200169> mountx: strange
[10:58] <oCean_> Onide: don't you have a swap partition? swapfiles are useful as alternative, or as additional
[10:58] <pihhan> Onide: check if you have free space on disk first, it is most common problem i have seen, try df -h comman
[10:58] <mountx> rdw200169, nice
[10:58] <rdw200169> mountx: that, and i don't have incessant timeouts on the ubuntu repos anymore; again, strange
[10:58] <Onide> oCean_  I'm not even sure what a swap partition is =( , all i know for certain is that even "startx" wont boot me into GUI
[10:59] <tom17bombadil> i can use my scanner only as root
[10:59] <evowill_> Onide, Have a look at https://help.ubuntu.com/community/SwapFaq
[10:59] <megarom> yes i have muixers i can adjust the volume off ... alike ... master front pcm surtround ... upto IEC958
[10:59] <rdw200169> mountx: this has *got* to do with tcp windowing or something
[10:59] <Onide> evowill_: ok I'll check that out thank you
[10:59] <mountx> how's it sound?
[10:59] <oCean_> Onide: use "swapon -a" to activate all available swap areas and "swapon -l" to list active areas
[10:59] <ziroday> Hi, how would I scan for a "persona" in a bunch of files?
[10:59] <Onide> oCean_: ok ill try that too, thank you
[11:00] <tom17bombadil> i did add my user to the scanner-group like that: sudo usermod -a -G scanner name
[11:00] <megarom> mountx: no sound yet
[11:00] <oCean_> Onide: if it doesn't work, i can show you how to create (extra) swapfile
[11:00] <vinja-sheep> Could somebody tell me how to compile from source?  I'm trying to see if the pidgin plugin works well.  What instruction / package do I need?
[11:00] <tom17bombadil> but xsane says it doesnot find a device
[11:00] <tom17bombadil> which other rights are necessary for using a scanner?
[11:00] <megarom> should i install esound ?
[11:00] <vinja-sheep> !compile
[11:01] <vinja-sheep> !packages
[11:01] <evowill_> ziroday, you can use something like regexxer
[11:01] <bill-nz> anyone out there able to help with monitor resolution issues?
[11:01] <ziroday> evowill_: I was thinking more along the lines of grep?
[11:01] <tayssir> Hi! I just installed linux-image-2.6.18-6-686, but uname -r still says I have 2.6.9-023stab048.4-enterprise. How do I make sure that I really have 2.6.18-6-686?
[11:01] <evowill_> ziroday, if you are looking for a GUI
[11:01] <mountx> im still trying to remember that wireless conf ... but iwconf ... is way better ... like VIM sort of
[11:01] <ziroday> evowill_: ah right
[11:02] <oCean_> Onide: to list use "swapon -s" not "swapon -l"
[11:02] <mountx> ok ... megarom you've got alsa but it's f... we'll not good ... so you need to recompile
[11:02] <megarom> mountx: what can i try after pulseaudio is removed ?
[11:02] <megarom> whart are the nessecairy steps ?
[11:02] <Photoguy> In drive properties, there are some custom commands, what is a file system command so that I can read/write?
[11:02] <rdw200169> megarom: just switch the sound settings to alsa
[11:02] <mountx> your on intrepid right
[11:02] <Onide> oCean_: ok i did that,  "/dev/sda7   it tells me
[11:03] <Gotu> if i use wine which gives functionality and looks of window on linux...then what is the difference using linux over window...can u plz tell me
[11:03] <rdw200169> megarom: b/c alsa was always there
[11:03] <mountx> yep alsa is a not so friendly necessary
[11:03] <rdw200169> Gotu: i think you've got wine misunderstood.  it doesn't give the 'looks' of windows.  it is a tool that runs windows applications in linux.
[11:03] <Rencx> why my kino cant capture video from camera?
[11:03] <mountx> on some system ... especially intel based HD systems it needs to be compiled
[11:04] <oCean_> Onide: well, so there is a swap partition active. I'm not sure why adding would enable starting X environment
[11:04] <Rencx> can anyone help me fix KINO to capture video from video camera?
[11:04] <mountx> if you use ubuntu studio. .. it will usually pick up what you have ... but straight ubuntu usually doesn't
[11:04] <mountx> bb ... jas
[11:04] <bill-nz> Gotu: the question really is why is there is wine.  wine exists for people who want the freedom of linux, but need to run a windows-only application
[11:04] <Photoguy> I just want to use my USB drive!
[11:04] <rdw200169> Gotu: developers basically integrated all the windows dll files (re-engineered) for the linux kernel backend, among other things.  this way, windows apps *think* they're running in windows when in actuality they were always running in linux
[11:05] <oCean_> Onide: only this problem after hybernate? After complete reboot, X does start?
[11:05] <mick02> Photoguy what's the problem?
[11:05] <rdw200169> Gotu: on a side point, the wine devs have worked long and hard to dispel the notion that wine is an 'emulator'.  it's not.  and, they deserve a whole heck of a lot of credit for what they've accomplished
[11:05] <Photoguy> I can't acces my USB drive, it says it's read only..
[11:06] <Photoguy> I don't have a lock switch
[11:06] <Photoguy> So it's not that
[11:06] <ThoMe> hello. can anybody help me with "aspell" ?
[11:06] <Photoguy> !aspell
[11:06] <Photoguy> Rats
[11:06] <aeosynth> go to terminal, type 'man aspell'
[11:06] <ThoMe> I would like add words to a aspell word book
[11:06] <mountx> rdw200169,  true .. wine is a piece of art for what they've made possible
[11:06] <Kartagis> Package openldapd is not available, but is referred to by another package. <--- i get this. what to do?
[11:06] <mick02> Photoguy, in a terminal type ls -la /media/
[11:06] <ThoMe> with aspell -a  "*Bla" is is ok
[11:07] <rdw200169> Kartagis: you're thinking of slapd
[11:07] <Photoguy> Ok
[11:07] <ThoMe> with echo "*Bla" |aspell -a not
[11:07] <rdw200169> Kartagis: that's the actual name for openldap
[11:07] <mick02> What does it say there?
[11:07] <Rencx> can anyone help me fix KINO to capture video from video camera?
[11:07] <Photoguy> Hold on Pastebin
[11:08] <rdw200169> mountx: i keep saying that in a couple years they'll have it down to a perfect science, such that the time between a windows app release and its' compatibility with linux is very short
[11:08] <Photoguy> mick02: this is the one I want to use  http://pastebin.com/m49dee9f5
[11:08] <omid8bimo> hi, i kinda repaired my ubuntu and after rebooting into it now the Broadcom STA wireless driver is not there. can anyone help?
[11:08] <Eutychus> woohoo! it worked. kubuntu is finally installed.!  :)    can i add edubuntu as a module into kubuntu?
[11:08] <mountx> rdw200169, hopefully they'll have it like virtualbox where an app will run better than it will in windows
[11:09] <aeosynth> when I try to access Users and Groups, i get a message saying i'm not allowed to access the system configuration - how do I allow myself access?
[11:09] <rdw200169> mountx: linux may have it's faults.  regardless, i've had brilliant success getting World of Warcraft running on a myriad of Ubuntu installations
[11:09] <mountx> megarom, you there?
[11:10] <mountx> rdw200169, I wish I had the same success with spore ... then my g/f would stop hating me so much
[11:10] <Slart> aeosynth: isn't there a "unlock" button or similar?
[11:10] <sipior> ThoMe: try echo "Bla" | xargs aspell -a {}
[11:10] <rdw200169> mountx: are you running the latest wine binaries? i've been using the wine ppa for ages now
[11:10] <omid8bimo> hi, i kinda repaired my ubuntu and after rebooting into it now the Broadcom STA wireless driver is not there. can anyone help?
[11:10] <aeosynth> Slart: I don't see any
[11:10] <Slart> aeosynth: lower right corner?
[11:10] <ziroday> !broadcom | omid8bimo
[11:11] <Slart> aeosynth: next to the "close" button?
[11:11] <ThoMe> sipior: hello. the same. @(#) International Ispell Version 3.1.20 (but really Aspell 0.60.6)
[11:11] <bill-nz> with 1315 users, there has to be at least one who can help me fix my screen resolution issue
[11:11] <megarom> yezs mountx ... was just smoking a sig out back
[11:11] <mountx> rdw200169, no ... i haven't messed w/ it ... will it run spore or even the sims ... please tell me so
[11:11] <aeosynth> Slart: Nope, just - The configuration could not be loaded You are not allowed to access the system configuration.
[11:11] <megarom> just seruck
[11:11] <mountx> megarom, ... i'm about to do the same
[11:11] <Slart> aeosynth: you are running intrepid, right?
[11:11] <megarom> hehe
[11:11] <rdw200169> mountx: well, i don't know.  i do know, though, that it's a lot more stable
[11:11] <megarom> damn semawhores ;)
[11:12] <aeosynth> Slart: Yeah. My default profile got busted so I'm trying to migrate to a new one
[11:12] <ThoMe> sipior: mom
[11:12] <omid8bimo> the broadcom sta driver disappeared from my hardware drivers menu in gnome restricted drivers. how can i add it back?
[11:12] <rdw200169> mountx: when i finally got pulseaudio working w/ wine, i was set with foobar2000!
[11:12] <mountx> megarom, follow this guide and if it doesn't get fixed ... i'll be on tomorrow:  https://help.ubuntu.com/community/HdaIntelSoundHowto
[11:12] <mountx> brb
[11:12] <boingOo> broadcom o.O buy other
[11:12] <ThoMe> sipior: mo
[11:12] <Slart> aeosynth: hmm.. you might have to add users using the command line then.. I can never remember if it's useradd or adduser that is the right command to use. I think they both exist
[11:13] <ThoMe> sipior: http://paste.keks.be/236 this works good so
[11:13] <megarom> okey mayber carch u later ...? like tommoroz
[11:13] <evowill_> omid8bimo, sudo apt-get install linux-restricted-modules
[11:13] <aeosynth> Slart: I added myself to all the same groups as my default profile, I can run synaptic and sudo, but this and a few others aren't working
[11:13] <oCean_> I'm on friends laptop. There is no video output (from mplayer or totem) while playing avi. HW is Intel Corporation Mobile 4 Series Chipset Integr graph controller. Uses "intel" in xorg.conf, glxgears/glxheads work fine. No errors, just no video output. Suggestions?
[11:13] <omid8bimo> evowill_: thanks dude
[11:13] <Slart> aeosynth: oh.. you've already created a new user?
[11:13] <aeosynth> Slart: I've already added the user - I'm on the new profile right now
[11:13] <evowill_> omid8bimo, np
[11:14] <Slart> aeosynth: ah.. hmm.. what happens if you run "gksudo users-admin" from a terminal?
[11:14] <Onide> Someone able to help me get back into the GUI? I'm stuck in console every time i reboot computer
[11:15] <gaelfx> is Pidgin 2.5.4 on any of the repo lists that anyone knows of?
[11:15] <aeosynth> Slart: it's working :)
[11:15] <rdw200169> gaelfx: check the PPA's on launchpad.net
[11:15] <gaelfx> rdw200169: thanks
[11:16] <Slart> aeosynth: yay.. it's supposed to work without gksudo but I can't really think of a reason why it wouldn't.. might be something special you've forgotten to do with the new user
[11:16] <RRos> How can I use an English user interface and Dutch time and currency formats?
[11:16] <mick02> Onide try typing sudo /etc/init.d/gdm restart
[11:16] <bill-nz> anyone willing to help me with screen resolution issue?
[11:16] <bashca> hi there all
[11:16] <Onide> mick02: Will try that thank you
[11:16] <mick02> Onide np
[11:17] <Eutychus> does kubuntu need a firewall or antivirus checker?
[11:17] <bashca> please help  me  i want to dialup  with  gnome-ppp  with simple user ??
[11:17] <Onide> mick02: "*stopping GNOME display manager...
[11:17] <jaws2_> does anyone know a way to change the look of amarok 2 ?
[11:17] <Onide> mick02: And now its back into console, dam lol
[11:17] <mick02> Onide Do you use Gnome or KDE?
[11:18] <rn0308982> Eutychus: as with any other OS, that is all a personal preference
[11:18] <Slart> Eutychus: there is already a firewall installed.. write !firewall for more info.. viruses aren't really a problem for many reasons.. there are antivirus software available but that's mostly used for mail-systems and such
[11:18] <gaelfx> sheesh, the version on PPA is even older than the one in Ubuntu now
[11:18] <Onide> mick02: Errr, I assume Gnome? Its whatever i downloaded and put onto a CD off the Ubuntu website
[11:18] <Eutychus> Slart: thanx.
[11:18] <Onide> mick02: I'm very new to Ubuntu , but i really want to use it for University this year over Windows
[11:19] <rdw200169> gaelfx: https://launchpad.net/~unofficial-backports/+archive this one's got 2.5
[11:19] <rdw200169> gaelfx: well, 2.5.0
[11:19] <Eutychus> this is great guys. thanx.. :) bbl.
[11:19] <zamba> after installing the ubuntu restricted driver for nvidia cards, i can't get a higher resolution than 1024x768.. i thought the restricted driver was supposed to be an improvement over the free driver?
[11:19] <mick02> Onide in the console can you type sudo apt-get install pastebinit
[11:19] <bill-nz> zamba - i have same issue
[11:20] <zamba> bill-nz: and no solution?
[11:20] <bill-nz> nope
[11:20] <Slart> zamba: it usually is... are you really sure you're using the binary driver?
[11:20] <mountx> night all ... its sleepy time
[11:20] <Slart> zamba: run glxgears -info in a terminal.. check the first couple of lines and see what driver it says you're using
[11:20] <zamba> Slart: what do you mean?
[11:20] <zamba> Slart: ok
[11:20] <koopee> I just bumped into a strange "linux plaintext" partition in my hard drive when I was trying to install ubuntu on it.
[11:20] <rn0308982> night mountx
[11:20] <Onide> mick02: ok typed that and its downloading something - This is on my Laptop computer next to me, im using IRC from my desktop
[11:20] <bashca> i can't connect to net  using  gnome-ppp with error  no root privilege
[11:20] <Milk_Rulz> mountx, thanks for all your help, it's working now :)
[11:21] <zamba> Slart: http://pastebin.com/m150214bd
[11:21] <mountx> cool. .. i'll be back on tomorrow night
[11:21] <zamba> i'm feeling a bit claustrophobic here :p
[11:21] <mick02> Onide check your private messages
[11:22] <koopee> Any idea what is a "linux plaintext" partition? It seems to prevent me from repartitioning the hard drive in install
[11:22] <Slart> zamba: yup.. seems you're using the binary driver alright.. the other thing that sometimes fails is that X can't get info from your monitor about what frequencies it can handle
[11:22] <zamba> Slart: the benchmark is returning around 900 fps for the gears, if that means anything
[11:22] <zamba> Slart: what's the solution for that then? an empty xorg.conf?
[11:23] <Slart> zamba: it's usually handled via some kind of "plug & play"-ish protocol called EDID.. but that doesn't always work and X then uses something that is very very safe.. then you end up with stuff like 800x600
[11:23] <bill-nz> Slart: i have same issue, and it only started when the latest nvidia update came out the other day
[11:24] <Slart> zamba: what you can do it look up your monitor specs.. usually from the manufacturers website .. and enter those values in the otherwise empty xorg.conf..
[11:25] <zamba> Slart: the graphic card has a dvi out option, but my monitor only has vga in.. so i have to use a dvi-to-vga-adapter to get the signal to the monitor.. could this be blocking the EDID information in some way?
[11:26] <swapnil> how to install xmind on ubuntu
[11:27] <Slart> zamba: I have no idea.. it's possible, sure
[11:27] <bashca> !dialout
[11:27] <bashca> !gnome-ppp
[11:27] <jimmyj> Hi, can anyone help me with some graphics driver issues please
[11:27] <jimmyj> ubuntu 8.10, Geforce 6200 -> Ubuntu is running in low-graphics mode.
[11:27] <Ward1983> "IP adress detected on command line. Runing in single user mode" < what does this mean?
[11:28] <John> hi
[11:28] <bill-nz> jimmyj: join the club :)
[11:28] <DWITA_99> hi now i have xubumtu on my ubuntu
[11:28] <jimmyj> bill-nz: lol, spent all day yesterday and got nowhere
[11:29] <Slart> zamba: here's an example of how to enter the frequencies, http://paste.ubuntu.com/107290/
[11:29] <oCean_> I am on friends laptop. There is no video output from mplayer (or totem) when playing avi. Suggestions?
[11:29] <bill-nz> jimmyj: whatever you do DO NOT install the driver from the nvidia site.  totally screwed my xserver and had to reinstall the os
[11:29] <zamba> Slart: will i still be able to select between the different resolutions by using the system->preferences menu?
[11:30] <DWITA_99> change the player session
[11:30] <zamba> Slart: that's all?
[11:30] <Slart> zamba: horizSync and VertRefresh are usually found in the hardware specs of your monitor.. if you can't find them you can usually use values from a monitor with a similar size, resolution.. they say using bad values can damage the monitor though so be a bit careful
[11:30] <vinja-sheep> Ubuntu 8.10 come with what sound as default?  PulseAudio?
[11:30] <Slart> zamba: afaik, yes.. I don't mess around with my resolutions so I haven't really tried
[11:30] <jimmyj> bill-nz: ok, already did that, will i need to reinstall ?
[11:31] <zamba> Slart: what does the option dpms mean?
[11:31] <Slart> vinja-sheep: alsa sound with pulseaudio on top of that
[11:31] <bill-nz> jimmyj: well, if you can get gdm and x to start, then you're ahead of where i was
[11:31] <vinja-sheep> Slart: Thanks.  I'll try the plugin.
[11:31] <Slart> zamba: Vesa Display Power Management.. but I think you can skip that line
[11:31] <koopee> slart: I doubt all fairly modern monitors are not so sensitive to the bad sync values. Please correct me if I have wrong.
[11:31] <jimmyj> bill-nz: yeah they start but only in low-graphics mode
[11:31] <Slart> zamba: the important ones are the two frequencies
[11:31] <zamba> Slart: cool
[11:32] <Ward1983> "IP adress detected on command line. Runing in single user mode" < what does this mean?
[11:32] <bill-nz> jimmyj: after i installed the driver from the site, i couldn't get of of command line.  that's why i started over again
[11:32] <Slart> zamba: also check the file /var/log/X11/xorg.0.log .. X is usually quite good at pointing out why it doesn't want to use a certain resolution there.. error lines will start with EE, warnings with !! I think
[11:32] <aremay> hello
[11:33] <Slart> zamba: I have to run.. but you have some stuff to try now.. ask the channel if you run into any problems
[11:33] <aremay> anyone tried gnome-do's with docky themes?
[11:33] <Kartagis> in #ldap i've been told that apt-get install should create slapd.conf, but it didn't. any ideas why?
[11:33] <koopee> zamba: my X started working quite fine after I removed xorg.conf file. YMMV
[11:34] <jimmyj> bill-nz: think i'm just gonna re-install os anyway - i'm sure in all my tinkering i may have messed something up
[11:34] <bill-nz> jimmyj: you will still be stuck in low res mode though... that's why i'm here
[11:34] <NorthByNorthWest> Hi! Ubuntu wont use my soundcard for playback... although Ive chosen it in "System->Settings->Sound" and "test" gives me the beep-sound all playback goes to the chips on the motherboard!
[11:35] <zamba> koopee: hm.. but do you connect your monitor using a vga connection or dvi?
[11:35] <zamba> koopee: because i believe the edid information get blocked when using the dvi-to-vga-adapter
[11:35] <koopee> its vga
[11:35] <jimmyj> bill-nz: you had any progress at all ?
[11:35] <vinja-sheep> I'm having issues with installing VLC (well not that one)... but to be more specific... to use mozilla-plugin-vlc as my default plugin for Firefox.  Rather than dealing with totem + codecs.  It didn't went well for me.  Even VLC have instructions for Ubuntu 8.10.
[11:35] <slyuk> NorthByNorthWest: can you not disable your oboard in the bios, as so ubuntu only knows of one sound card to use.
[11:36] <koopee> zamba: That's possible
[11:36] <zamba> koopee: that worked! :=)
[11:36] <zamba> koopee: thanks!
[11:36] <koopee> really? Great!
[11:36] <NorthByNorthWest> slyuk: good idea! ill do that right away! thanks!
[11:36] <baz> if I am ssh'ed into a box, is there a way to search the file system for a certain filename?
[11:36] <bill-nz> jimmyj: nope, just watching zamba's progress.  after asking the question for an hour zamba finally got someone to answer
[11:37] <vinja-sheep> baz:  Try mlocate <something>
[11:37] <bill-nz> jimmyj: apparently zamba had luck with getting rid of xorg.conf - go figure
[11:38] <baz> vinja-sheep, command not found
[11:38] <jimmyj> bill-nz: yeh i have tried restoring xorg.conf to original ver - no luck
[11:39] <suji> anyone know how to get permission to open slapd.conf file
[11:39] <unx> hi ppl
[11:40] <koopee> jimmyj: have you tried to remove the xorg.conf?
[11:40] <bill-nz> suji: sudo should work
[11:40] <koopee> jimmyj: Perhaps backup it first
[11:40] <jimmyj> bill-nz: remove it all together ?
[11:40] <bill-nz> jimmyj: yeah
[11:41] <suji> ya it work
[11:41] <jimmyj> bill-nz & koopee: will try that now
[11:41] <mfilipe> does anyone know any software to voice recognition that supports brazilian portuguese?
[11:42] <suji> bill-nz:i got it thank u
[11:42] <koopee> jimmyj: any success?
[11:42] <jimmyj> koopee: ctrl + alt + backspace to restart x or full reboot ?
[11:43] <NorthByNorthWest> slyuk: disabling on board sound chips in BOIS did the trick, thanks" :D
[11:43] <koopee> ctrl+alt+back should do the trick. Or log out / in
[11:44] <baz> if i "connect to server" thru nautilus then search, it doesn't seem to return any results, it just searches forever - is it just that its slow or does it not work?
[11:44] <koopee> jimmyj: try those first. Then reboot if necessary
[11:45] <jimmyj> koopee: didn't do the trick, just rebooting
[11:45] <koopee> jimmyj: so you removed the xorg.conf file?
[11:45] <jimmyj> koopee: yeah, backed it up and deleted it
[11:45] <koopee> ok. try reboot. See what happens
[11:46] <jimmyj> koopee: you are the man, all that time wasted - thankyou very much
[11:47] <koopee> Glad to hear it helped!
[11:47] <koopee> I must thank a friend that told me
[11:47] <oprz> what is up with               0,6,12,18,24,30,36,42,48,54 * * * * "lynx\ uberbeef.org\/iploader\.php"
[11:48] <koopee> But has anyone bumbed into "linux plaintext" partition?
[11:48] <unop> oprz, does the job every 6 minutes
[11:48] <zamba> has anyone here set up central authentication using ldap?
[11:48] <oprz> unop, yeh but it isnt working
[11:48] <Deon> I'm having so many problems with my Ubuntu Installation! :(
[11:49] <unop> oprz, i think you wanted.   0,6,12,18,24,30,36,42,48,54 * * * *  lynx uberbeef.org/iploader.php
[11:49] <oprz> and that will work?
[11:49] <unop> oprz, it ought to
[11:49] <oprz> ok
[11:49] <rebel_kid> once in a while i get a console frozen, i C-M-F1 and it just freezes up its running screen so i go kill that process but when i flip back to it there is no change, i can C-M-F1 to get a new console just fine but i cant get rid of that one till i reboot, is there a way to kill it?
[11:49] <rebel_kid> or even better, unfreeze it
[11:50] <jimmyj> koopee: just looking at Hardware Drivers - no nvidia drivers are activated, so i must be using the ubuntu default driver - if i activate the nvidia driver will it bugger everything up ?
[11:50] <KingWilliam> Deon, like what?
[11:50] <Deon> Wubi just doesn't work at all.. there is *no* boot screen
[11:50] <Deon> Full install to a fresh new empty HDD is worse... just sits there after DOS screen blinking a dot....
[11:50] <oprz> Deon, dont use wubi then, download or order a ubuntu live CD
[11:50] <Deon> oprz: already have.
[11:51] <Deon> still doesnt work :(
[11:51] <koopee> jimmyj: Don't know for sure.
[11:51] <bill_> koopee: i rm'ed my xorg.conf, but my screenres still isn't being detected
[11:51] <KingWilliam> Deon, So I understand the installation succeeded, but when you restart the PC nothing happens?
[11:51] <jimmyj> koopee: gonna throw caution to the wind and give it a try - will report back in a min
[11:52] <Cyber_Hades> I change my workgroup name in smb.conf and share my folders... but still can not see my Ubuntu pc in workgroup ?????
[11:52] <koopee> bill_: did you restart X?
[11:52] <Cyber_Hades> I have Ubuntu and XP in same workgroup.
[11:52] <Deon> KingWilliam: Yep. It worked fine, partitioned the new hard drive in ext3 (i think thats what its called?) and username etc everything was great.. then it just sits there blinking... :/
[11:52] <KingWilliam> Cyber_Hades, Can you ping to the oher PC?
[11:53] <baz> how do i change the default application that handles XML files? Basically I wan them to open with my text editor rather than firefox
[11:53] <bill_> koopee: yea, and my x log is giving a warning that the EDID read is invalid
[11:53] <KingWilliam> Deon, did you use the server / desktop version? In other words, do you have a GUI during the installer?
[11:53] <Cyber_Hades> Yes... I see XP shared files on Ubuntu... but can not see Ubuntu shared files on XP !!!
[11:54] <jimmyj> koopee: yeh activating the reccommended nvidia driver has put me back into low-graphics mode - any ideas ?
[11:54] <KingWilliam> Cyber_Hades, I had a similar issue. The folder you are sharing on the ubntu machine, is it a folder on a drive that is mounted>
[11:54] <Deon> KingWilliam: Yep, desktop.
[11:54] <Cyber_Hades> YES !
[11:54] <oprz> everyone, that crontab thing did not work!
[11:54] <jimmyj> koopee: other than just removing the xorg.conf again
[11:54] <bill-nz> jimmyj: same
[11:55] <KingWilliam> Cyber_Hades, make sure the drive is mounted in that case
[11:55] <Hocok> ПРИВЕТ НАРОД!!!!!!!
[11:55] <Cyber_Hades> Yes hi is ! I can not see my desktop shared files too
[11:55] <koopee> jimmyj: and after that you don't have the nvidia drivers in use anymore?
[11:55] <Cyber_Hades> I can not see eny shared files from my Ubuntu...
[11:55] <quibbler> !ru
[11:56] <KingWilliam> Deon, then I don't understand what you mean with "it sits there blinking". Did the installer finish completely? Did it fill the progress bars? :P
[11:56] <bill-nz> jimmyj: out of curiosity, what brand monitor are you using?
[11:56] <oprz> unop, that still hasnt worked!
[11:56] <jimmyj> koopee: yeh, after rm xorg.conf, nvidia drivers no longer in use
[11:56] <sleepy_cat> HOW TO REGISTER ON IRC
[11:56] <Deon> sleepy_cat: /msg nickserv help
[11:56] <sleepy_cat> REGISTER THE NICKNAME ON IRC
[11:56] <jimmyj> bill_nz: tried both a LG and a old digimate
[11:56] <Feddozz> Hello! I've got Hardy and I would like to install Intrepid. I tried with the upgrade but it din't work well. I could format and reinstall from scratch but I don't want to lose all my settings. In fact I was thinking to format just the '/' partition and not the '/home' partition. would it work?
[11:56] <rdw200169> !ru | Hocok
[11:56] <oprz>  /msg nickserv register <email>
[11:57] <unop> oprz, debug it this way perhaps?   */6 * * * *  lynx uberbeef.org/iploader.php >/tmp/lynx.log 2>&1
[11:57] <KingWilliam> sleepy_cat, http://freenode.net/faq.shtml#nicksetup
[11:57] <unop> oprz, and watch /tmp/lynx.log regularly
[11:57] <Deon> KingWilliam: Sorry, finished all the way, booted to the live desktop and everything was great. Restarted, and nothing.
[11:57] <Cyber_Hades> I see my XP machine and shared files too... on Ubuntu. But can't see Ubuntu machines and shared files...
[11:58] <bill-nz> jimmyj: i just found out by looking at the x log that the EDID (the plug & play for the monitor) info is being rejected
[11:58] <KingWilliam> Deon, not even grub bootloader shows up???
[11:58] <Deon> KingWilliam: no... :(
[11:59] <oprz> unop, i have to go in 5 minutes, i'll b
[11:59] <oprz> *be back in 1 hour
[12:00] <jimmyj> bill_nz: isn't that what the xorg.conf file is for ? to set the resolutions
[12:00] <Deon> KingWilliam: Is there a windows utility that can manage it or something?
[12:00] <jimmyj> koopee: just rm xorg.conf again and got out of low-graphics mode but screen is off center
[12:00] <KingWilliam> Deon, thats strange... I can't help you out. If no one else in this channel can I suggest you check this channel: #ubuntu-boot
[12:00] <suji> bill_nz:one file slapd is in /etc/default directory. it can be open in gedit. it doesnt open in terminal using sudo and also it cant be modified(permission denied)
[12:00] <bill-nz> jimmyj: yeah, that's what I thought, but 8.10 doesn't seem to populate the xorg.conf file like it used to
[12:00] <KingWilliam> Deon, the only tip I can give you is to try and reïnstall grub only using the liveCD
[12:01] <Deon> Can I do that? Grub only? Without reinstalling entirely?
[12:02] <SlimeyPete> yes
[12:02] <SlimeyPete> you use the grub-install script IIRC
[12:02] <suji>  Any one know :one file slapd is in /etc/default directory. it can be open in gedit. it doesnt open in terminal using sudo and also it cant be modified(permission denied)
[12:02] <KingWilliam> Deon, this tutorial might fix you're problem. but I don't promess: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows
[12:03] <jimmyj> bill_nz: i read somewhere that xorg.conf isn't used that much by 8.04 + only for screen res when ubuntu fails to autodetect
[12:04] <Deon> SlimeyPete: Wherebouts is that?
[12:04] <Deon> SlimeyPete: Just in utilities or something?
[12:04] <SlimeyPete> Deon: you run it from a terminal. I think the howto mentioned by KingWilliam will probably involve using it
[12:04] <RRos> I just installed ubuntu 8.10 but after 15-30 minutes I get a Kernal Panic (System freezes and CapsLock starts flashing) can anyone help me out?
[12:05] <mick02> !bacula
[12:05] <mick02> Anyone have any experience with Bacula across a LAN?
[12:05] <Deon> sudo grub-install --root-directory=/mnt/root /dev/hda     <<< I would assum
[12:05] <Deon> assume*
[12:06] <KingWilliam> Deon, it is not that command
[12:07] <Deon> Kingwilliam: isn't that grub reinstall?
[12:07] <silv3r_m00n> hi there.. in synaptic what is the difference between removal and complete removal
[12:07] <jimmyj> bill_nz: i have correct resolution now but picture is off center - any ideas how to adjust without using monitor controls ?
[12:07] <KingWilliam> Deon, its some sort of grub install. By using the grub command line
[12:08] <KingWilliam> Deon, it doesn't take much time...
[12:08] <Rencx> how i can capture video from may camera on KINO?
[12:08] <Rafterman> oh
[12:08] <Deon> I think I see it.. it's like a few lines long
[12:08] <bill-nz> jimmyj: try turning your monitor off and on - sometimes this helps
[12:09] <craigbass1976> I have a cooked hard drive; I'm running live ub and trying to get some data.  ntfs_attr_pread: ntfs_pread failed  when running mount /dev/...  /mnt    Am I wobbeyjawed, or is there hope?
[12:09] <quibbler> silv3r_m00n, removal gets rid of the program ..complete removal also delete any configuration files
[12:09] <viktor> first milion that i made in this site http://www.burzs.com/edit/arg.php?id=40931
[12:09] <silv3r_m00n> quibbler: hmm
[12:09] <craigbass1976> windows will NOT boot for me to get the data that way
[12:10] <jimmyj> bill_nz: no luck, if i change res it auto adjusts but to the wrong place
[12:10] <quibbler> silv3r_m00n, if you are reinstalling just remove
[12:10] <viktor> first milion that i made in this site http://www.burzs.com/edit/arg.php?id=40931
[12:10] <bill-nz> jimmyj: are your hsync  and vsync set correctly?
[12:11] <strange> hey guys i made a raid5 with mdadm but now a disk isnt accessible how do i assemble the raid and make it rebuild with a new disk to save my data?
[12:11] <SlimeyPete> !mdadm
[12:11] <SlimeyPete> !raid
[12:11] <Cyber_Hades> KingWilliam : I solved my problem... netbios name = YOUR_HOSTNAME... that filed i changed :))
[12:11] <viktor> first milion that i made in this site http://www.burzs.com/edit/arg.php?id=40931 !!!!!
[12:11] <jimmyj> bill_nz: arn't they set in the xorg.conf ? as i have now have removed it
[12:12] <zorglu_> !info duplicity
[12:12] <Milk_Rulz> does anybody here know there emerald and GTK?
[12:12] <strange> i went to that link it doesnt say anything about raid5
[12:12] <craigbass1976> viktor, what are you doing?
[12:12] <KingWilliam> Cyber_Hades, OK well done then :D I woudn't have thought of that ;)
[12:12] <Milk_Rulz> ?
[12:12] <Cyber_Hades> Thanks eny way !
[12:14] <new_to_ubuntu-> i've set samba running on my ubuntu server, it is up but i don't know how to set it so the shared dirs are writeable to guests
[12:15] <Rencx> how i can capture video from may camera on KINO?
[12:15] <new_to_ubuntu-> how to set it writeable?
[12:15] <RRos> I just installed ubuntu 8.10 but after 30-60 minutes I get a Kernal Panic (System freezes and CapsLock starts flashing) can anyone help me out?
[12:16] <Milk_Rulz> can somebody please help me install this emerald theme
[12:17] <sipior> RRos: can you reproduce the panic?
[12:17] <RRos> I don't know how
[12:18] <sipior> RRos: what were you doing at the time? also, was this the first time you had linux running on this machine?
[12:19] <RRos> sipior, I was installing some programs. I used to run ArchLinux on this machine (Lenovo T61p)
[12:20] <erUSUL> RRos: something in kernel logs ??
[12:20] <RRos> sipior, I installed linux-backports-modules-intrepid because of the "System lock-ups with Intel 4965 wireless" but I don't know if that's really the problem
[12:20] <vinja-sheep> Would somebody like to test a bug for me?  This is relatively simple.
[12:21] <sipior> RRos: if the machine has only panicked this one time, you might just let it go as a one-off. you can look in /var/log/messages and /var/log/dmesg to see what the machine is complaining about as well.
[12:22] <linux> somebody can tell me how i can do to play music on cd in linux?
[12:22] <RRos> sipior, this is the 5th time in 4 hours already
[12:22] <sipior> RRos: ah, then that is serious :-) do the logs say anything at all?
[12:22] <vinja-sheep> !music
[12:22] <RRos> sipior, well I don't know where and what to look for
[12:23] <craigbass1976> !getrichwhileyoursleeping
[12:23] <sipior> RRos: i mentioned two files to check just previously
[12:23] <vinja-sheep> !player | linux
[12:23] <RRos> sipior, ok I will do that :)
[12:23] <Milk_Rulz> how can I move a file/folder into /user/share?
[12:23] <notassociated> the mailing list http://lists.shmoo.com/mailman/listinfo/hostap does not have a search option. is there any tool that i can use to search the archives for a regular expression?
[12:24] <Milk_Rulz> it keeps saying I don't have the privlidges
[12:25] <sproaty> hey, some apps. have stopped opening "maxmized" when I open them up (aMSN, amarok), while all my others are fine
[12:26] <vinja-sheep> I'm interested in installing sun-java6-jre -- Will this work under Firefox or is there a plugin I need to obtain?
[12:26] <sproaty> I maximise them after they open, thinking it'll help them remember the last used settings, but nothing
[12:26] <Milk_Rulz> sproaty, do you know how to change your theme in aMSN?
[12:26] <VnCnT> is there a tool to connect my Nokia 6680 to the laptop (running Intrepid, with a working bluetooth connection) for backing up the phone?
[12:26] <sipior> Milk_Rulz: "sudo mv"
[12:26] <sproaty> Milk_Rulz:  yeah I guess
[12:26] <Milk_Rulz> sudo mv?
[12:26] <sipior> Milk_Rulz: sudo mv <file> /usr/share/
[12:28] <sproaty> It;s weird though, these apps are loading with the top of the window (min/max/close) appears where the toolbars on other programs are
[12:28] <Milk_Rulz> thanks for that
[12:28] <Milk_Rulz> when I use mv
[12:28] <linux> iam new in this comunity and iam angolan, i speak moreless inglish i hope that with you i will be good in linux/ubuntu
[12:28] <linux> ok
[12:28] <Milk_Rulz> what to I use for spaces?
[12:28] <sipior> vinja-sheep: i believe sun-java6-jre installs the plugin as well
[12:28] <vinja-sheep> sipior:  Hmm.  I'll check that one up.
[12:28] <ziroday> linux: what is your native language. Your mother tounge?
[12:29] <sipior> Milk_Rulz: they need to be quoted with a backslash, so: sudo mv This\ is\ one\ file.txt /usr/share
[12:29] <linux> my native language is português
[12:29] <ziroday> !pt | linux
[12:29] <erUSUL> sipior: vinja-sheep no it does not you need sun-java6-plugin
[12:29] <Milk_Rulz> `aMSN-Live-1.0': No such file or directory
[12:30] <ziroday> linux: you can talk portugese to other portugese speaking people there
[12:30] <linux> obrigado!
[12:30] <Milk_Rulz> don't worry, got it.
[12:30] <sipior> erUSUL: apt-cache search doesn't actually show such a package...
[12:30] <erUSUL> sipior: not in 64 bits
[12:31] <erUSUL> sipior: becouse there is no plugin for 64 bits you have to use the icedtea/openjava one
[12:31] <erUSUL> !find java6-plugin
[12:31] <Quintasan> http://wklej.org/id/41881/    <---- ntfs-3g was made like this on purpose?
[12:32] <Dr_willis> Quintasan,  on ubuntu here.. ntfs-3g uses the FUSE stuff.. so whats the actual problem?
[12:33] <erUSUL> !info icedtea6-plugin | sipior
[12:33] <sipior> erUSUL: interesting. i stand corrected.
[12:33] <Quintasan> Dr_willis: it asks me for password everytime I want to mount an ntfs-3g, It did not in Hardy
[12:33] <Quintasan> ntfs volume*
[12:33] <Milk_Rulz> who has aMSN?
[12:34] <sam_> hello
[12:34] <kop> Milk_Rulz, amsn ?
[12:34] <vinja-sheep> sipior + erUSUL:  Do I need to enable a repos link?  I don't see it in the list.
[12:35] <Dr_willis> Quintasan,  you may want to use the 'user' option perhaps or was it users.. in fstab..  I set mine to mount at boot up normally. or are you refering to a external usb ntfs filesystem?
[12:35] <Milk_Rulz> messenger program
[12:35] <Milk_Rulz> for msn messenger
[12:35] <kop> Milk_Rulz, I know what of it ?
[12:35] <spsneo> I am trying to access my ubuntu machine from a windows machine using ssh. But the file explorer does not come,, though the command prompt in the ssh client comes up. What to do?
[12:35] <Milk_Rulz> I'm trying to change the bg of my contact list, but I have no idea how
[12:35] <sam_> hey how does this Xchat works?? I'm new to it...
[12:35] <vinja-sheep> sam_: Just like that
[12:36] <kop> Milk_Rulz, bg ?
[12:36] <Dr_willis> spsneo,  trying to use Windows Exploreer to access a ubuntu box via ssh? or some other  file manager?
[12:36] <Milk_Rulz> background
[12:36] <azhar27> sam_ : Read the faq, you will understand it.
[12:36] <kop> backround ?
[12:36] <kop> skin ?
[12:36] <Quintasan> Dr_willis: I've thought I can achieve that without entry in fstab, I want it to mount at "/media/Windows 7" and I dont know how to put it into fstab
[12:36] <spsneo> Dr_willis: ssh secure shell
[12:36] <Milk_Rulz> I've changed my skin
[12:36] <Rencx> how i can capture video from may camera on KINO?
[12:36] <Rencx> how i can capture video from may camera on KINO?
[12:36] <sipior> vinja-sheep: apparently not available for 64-bit systems. have a look at icedtea-java7-plugin, or openjava.
[12:36] <Milk_Rulz> but I can't change the background
[12:36] <spsneo> Dr_willis: I am using ssh secure shell
[12:36] <azhar27> sam_ : http://www.xchat.org/faq/
[12:37] <vinja-sheep> sipior: Are you running Intrepid 32bit?
[12:37] <spsneo> I am trying to access my ubuntu machine from a windows machine using ssh. But the file explorer does not come,, though the command prompt in the ssh client comes up. What to do?
[12:37] <peleg> Rencx, have you read this: http://www.yourmachines.org/tutorials/kino.html#capturing_video ?
[12:37] <Dr_willis> Quintasan,  i would not use spaces in mountpoint names for a start.  The various ntfs-3g guides/docs detail how to make a fstab entry.. let me show one of mine as an example...    /dev/sda2 /media/VistaStorage ntfs-3g defaults,locale=en_US.UTF-8 0 0
[12:37] <vinja-sheep> sipior: That can be the cause.  I found the guide telling me the same thing about the plugin.
[12:38] <kop> Milk_Rulz, I was happy enough that it worked as far a skin (ugly for sure) and backround I have no idead sry
[12:38] <Milk_Rulz> alright, thank you for your help
[12:38] <Quintasan> Dr_willis: thanks
[12:38] <Milk_Rulz> oh but
[12:38] <Milk_Rulz> last quick question
[12:38] <kop> not like I did anything :-)
 no but i will now
[12:38] <spsneo> nobody to help me?
[12:38] <Milk_Rulz> do you know how to use emerald?
[12:38] <clee-saan> Hi, when i plug to my computer a mp3 player or usb key or mobile phone or whatever through usb, the device says it's connected, but the computer does not do anything. It used to work, with the very same devices a few days ago but not anymore. Help ?
[12:38] <Dr_willis> spsneo,  im still not clear on the file-explorer bit.. You are expecting the windows exporeer file manager to access things via ssh? it cant do that as far as i know.  I always use 'winscp' to access things via ssh on windows.
[12:38] <pecko> hellou. somebody to help with ubuntu and ati graphics? pls /query me. thx
[12:39] <jrib> spsneo: what is file explorer?  Are you using winscp?
[12:39] <jrib> Milk_Rulz: install emerald, then select it as your default window decorator in ccsm
 i cant pres on buttons
[12:39] <Milk_Rulz> ccsm?
[12:39] <jrib> !ccsm | Milk_Rulz
 can i send live video from camera?
[12:40] <kop> jrib, tnx me bein lazy :-/
[12:41] <pecko> ihave installed ati radeon 9250 pci into my box but ubuntu doesnt boot with a lots of segfaults and permission denied stuff:) any suggestions how to fix it?
[12:41] <peleg> Rencx, I have no idea, never tried it. This tutorial that I've sent you is just a google result. That's all I know.
[12:42] <gamla_kossan> um, in ibex, where in my home folder are my pidgin settings stored?
[12:42] <vinja-sheep> gamla_kossan: .purple
[12:42] <gamla_kossan> vinja-sheep: hehe, ok.. thanks =)
[12:42] <JesperHansen> Was wondering if there's an updated version of https://help.ubuntu.com/community/CustomRestrictedModules#Modify%20debian/rules somewhere. abi_version doesn't exist in the enlisted file debian/rules
[12:42] <Quintasan> Dr_willis: the defaults include nouser right?
[12:43] <Dr_willis> Quintasan,  i whoudl think so
[12:43] <clee-saan> Hi, when i plug to my computer a mp3 player or usb key or mobile phone or whatever through usb, the device says it's connected, but the computer does not do anything. It used to work, with the very same devices a few days ago but not anymore. Help ?
[12:43] <Milk_Rulz> ok I'm on compiz manager
[12:43] <Milk_Rulz> how do I change emerald to default?
[12:43] <pecko> hello. somebody to help with ubuntu and ati graphics? pls /query me. thx
[12:43] <sipior> vinja-sheep: by the way, there *is* a java 6 64-bit plugin available: see https://jdk6.dev.java.net/6uNea.html. not sure if that help you or not...
[12:44] <gamla_kossan> can I negate the -i flag to cp somehow? (set by alias)
[12:44] <vinja-sheep> sipior: Yup.  Installed that baby right in.
[12:44] <Milk_Rulz> kopppp
[12:44] <vinja-sheep> sipior: Wait... what? plugin?
[12:44] <jrib> !pm | pecko
[12:45] <spsneo> http://www.ssh.com/products/
[12:45] <spsneo> jrib:  I am using http://www.ssh.com/products/
[12:45] <FloodBot2> spsneo: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[12:45] <vinja-sheep> sipior: Will check the link. o.O
[12:45] <jrib> spsneo: try winscp, that's worked for me in the past
[12:45] <whuffor> gamla_kossan: I'd guess that giving the absolute path would negate any alias. e.g. /bin/cp ...
[12:46] <pecko> ihave installed ati radeon 9250 pci into my box but ubuntu doesnt boot with a lots of segfaults and permission denied stuff:) any suggestions how to fix it?
[12:46] <linux> alguem pode me dizer como posso mudar as resoluções do ecrã?
[12:46] <Seveas> !pt | linux
[12:46] <Milk_Rulz> can someone tell me how to set emerald as default?
[12:47] <linux> ok
[12:48] <Dr_willis> Milk_Rulz,  i normally install that 'fusion-icon' tool and let it set the defaults
[12:48] <Dr_willis> !info fusion-icon
[12:49] <gamla_kossan> whuffor: but of course. how silly of me.
[12:49] <gamla_kossan> thanks.
[12:49] <whuffor> gamla_kossan: no charge :)
[12:50] <vinja-sheep> sipior: I think it's installed.  Thanks. <_<
[12:50] <pecko> i have installed "ati radeon 9250 pci" into my box but ubuntu doesnt boot with a lots of segfaults and "permission denied" stuff:) can anybody help with this issue?
[12:52] <clee-saan> Hi, when i plug to my computer a mp3 player or usb key or mobile phone or whatever through usb, the device says it's connected, but the computer does not do anything. It used to work, with the very same devices a few days ago but not anymore. Help ?
[12:52] <doktoreas> Hello everybody, is it possibile to have yahoo messanger in empathy?
[12:52] <ziwul> hello
[12:53] <Milk_Rulz> I've installed fusion-icon
[12:53] <TecR0c> how do you view who is doing a ftp connection to the box in the terminal?
[12:53] <Milk_Rulz> I'm not seeing any difference?
[12:54] <pecko> i have installed "ati radeon 9250 pci" into my box but ubuntu doesnt boot with a lots of segfaults and "permission denied" stuff:) can anybody help with this issue?
[12:54] <jrib> !who | Milk_Rulz
[12:55] <vinja-sheep> Anybody want to confirm something relatively easy?  I want to know if it's *actually* a bug before I report it.
[12:56] <KingWilliam> tell us vinja-sheep
[12:56] <Milk_Rulz> wow thanks, it's working
[12:56] <Milk_Rulz> but
[12:56] <pecko> i have installed "ati radeon 9250 pci" into my box but ubuntu doesnt boot with a lots of segfaults and "permission denied" stuff:) can anybody help with this issue?
[12:56] <Milk_Rulz> can somebody tell me how to get the transparent effects?
[12:56] <Milk_Rulz> I was given some gtkrc file
[12:56] <Milk_Rulz> how do I apply it?
[12:56] <jrib> !enter
[12:57] <KingWilliam> Milk_Rulz, if you want transparant borders and that sort of stuff you should use emerald
[12:57] <Milk_Rulz> I'm using emerald
[12:57] <vinja-sheep> Check if you do have "Movie Player" in... Applications --> Sounds & Videos --> ...... and if you do... now... Go to System --> Preferences --> Main Menu..... Try and toggle that off.
[12:57] <Milk_Rulz> hold on this might help
[12:57] <Milk_Rulz> KingWilliam, I was given this link: http://sudosys.be/?q=die_hard_4.0_theme
[12:58] <jrib> vinja-sheep: works here
[12:58] <KingWilliam> If you have emerald, Milk_Rulz, you can find suitable themes (with transparacy) on gnome-look.org
[12:58] <Milk_Rulz> but I have the theme I want, I just need to get it transparent
[12:58] <vikku>  i changed my video preferences in mplayer to xv but its still giving me the famous vo error
[12:58] <vinja-sheep> jrib: Really?  I can't untoggle Movie Player off.  It's not even in the list.  Intrepid amd64.  You?
[12:58] <pecko> i have installed "ati radeon 9250 pci" into my box but ubuntu doesnt boot with a lots of segfaults and "permission denied" stuff:) can anybody help with this issue?
[12:59] <Milk_Rulz> and the guy said this "It looks best with the Clearlooks_blackblue GTK theme."
[12:59] <jrib> vinja-sheep: intrepid amd64.  find ~/.config/ ~/.local/ ! -user $USER
[12:59] <Milk_Rulz> how do I apply the Clearlooks_blackblue GTK theme?
[12:59] <isojussi> how i can update 7.04 to newer version?
[12:59] <jrib> Milk_Rulz: system -> preferences -> appearance I assume
[13:00] <jrib> !upgrade > isojussi
[13:00] <pecko> no help in this channel available:(
[13:00] <vinja-sheep> jrib: That command did what?
[13:00] <jrib> vinja-sheep: did it return anything?
[13:00] <vikku>  i changed my video preferences in mplayer to xv but its still giving me the famous vo error
[13:00] <vinja-sheep> jrib: No... nothing.
[13:01] <jrib> vinja-sheep: run alacarte from a terminal
[13:01] <KingWilliam> Milk_Rulz, drag the file you downloaded, the gtk theme, onto the appearance window
[13:01] <jrib> vinja-sheep: does « mplayer -vo xv FILE » work?
[13:01] <Milk_Rulz> "gtkrc" does not appear to be a valid theme.
[13:01] <vinja-sheep> jrib: I uninstalled mplayer (and totem).
[13:01] <pecko> i have installed "ati radeon 9250 pci" into my box but ubuntu doesnt boot with a lots of segfaults and "permission denied" stuff:) can anybody help with this issue?
[13:01] <pecko> i have installed "ati radeon 9250 pci" into my box but ubuntu doesnt boot with a lots of segfaults and "permission denied" stuff:) can anybody help with this issue?
[13:02] <FloodBot2> pecko: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[13:02] <vinja-sheep> jrib: Sticking with VLC.
[13:02] <KingWilliam> !who | Milk_Rulz
[13:02] <jrib> vinja-sheep: sorry wrong nick on the last one
[13:02] <jrib> vikku: does « mplayer -vo xv FILE » work?
[13:02] <pecko> i have installed "ati radeon 9250 pci" into my box but ubuntu doesnt boot with a lots of segfaults and "permission denied" stuff:) can anybody help with this issue?
[13:02] <Milk_Rulz> KingWilliam: "gtkrc" does not appear to be a valid theme.
[13:02] <vikku> jrib: what  is  the value of FILE thr ?
[13:02] <vinja-sheep> jrib: Ahh.  Any idea how I can get rid of broken link -- Movie Player in the main menu?
[13:02] <KingWilliam> Milk_Rulz, try this link: http://www.gnome-look.org/content/download.php?content=84355&id=1&tan=60450899
[13:03] <jrib> vikku: pick some file for mplayer to play
[13:03] <vinja-sheep> vikku: FILE is FILE.
[13:03] <KingWilliam> Milk_Rulz, it gives you the them as a tar.gz
[13:03] <pecko> is there anybody to give me an answer to my question?
[13:03] <vikku> ahhh ok
[13:03] <Milk_Rulz> KingWilliam: yep now what?
[13:04] <KingWilliam> Milk_Rulz, drag that file onto appearance :D
[13:04] <jrib> vinja-sheep: grep totem ~/.local/share/applications/*
[13:04] <jrib> !helpme | pecko
[13:04] <Milk_Rulz> KingWilliam: the tar.gz?
[13:04] <KingWilliam> Milk_Rulz, indeed
[13:04] <vinja-sheep> jrib: Came back empty-nested.
[13:05] <jrib> vinja-sheep: does /usr/share/applications/totem*.desktop exist?
[13:05] <pecko> i have installed "ati radeon 9250 pci" into my box but ubuntu doesnt boot with a lots of segfaults and "permission denied" stuff:)
[13:05] <Milk_Rulz> KingWilliam: Can't move directory over directory
[13:05] <pecko> ubottu: was that better?
[13:05] <vinja-sheep> jrib: Nope.
[13:05] <jrib> pecko: you should probably pastebin the errors and explain how you installed it
[13:05] <jrib> vinja-sheep: try 'pkill gnome-panel' to restart your panel
[13:05] <KingWilliam> Milk_Rulz, strange, Ill give it a shot myself... Pls wait a sec
[13:05] <vinja-sheep> jrib: It worked.  <_<
[13:05] <pecko> jrib: "installed" i mean plugged in:)
[13:06] <vinja-sheep> jrib: *** Thanks ***
[13:06] <pecko> jrib: when i plug-in ati radeon 9250 pci, ubuntu doesnt boot. is impossible to paste log:D
[13:06] <farf> hi, ive read through most of the support documents and faq and im having trouble with my installation, would anyone be able to walk me through troubleshooting video problems?
[13:06] <jrib> pecko: you said you got errors
[13:07] <jrib> farf: best to just ask the channel your question.  If someone knows the answer, they will try to help you
[13:07] <vikku> jrib : it worked
[13:07] <KingWilliam> Milk_Rulz, It works perfectly fine here.
[13:07] <jrib> vikku: pastebin ~/.mplayer/gui.conf
[13:07] <vikku> ok
[13:08] <perlsyntax> I  won a unlocked seirra aircard 881 from ebay and i was think what can i do with a unlocked aircard?
[13:08] <KingWilliam> Milk_Rulz, You can also hit the install button in appearances and select the tar.gz file i linked you
[13:08] <pecko> jrib: yes ive got... but, how can i copy and paste them, when OS doesnt boot?:P if i want to os to boot-up i have to plug-out graphics
[13:08] <perlsyntax> and how can i get it to work with unbuntu.
[13:08] <jrib> pecko: type them or take a picture...
[13:08] <Milk_Rulz> KingWilliam: Ok well this is what I've done, I right click Compiz Fusion Icon > Select Window Decorator > Emerald, applied the Die Hard theme on emerald
[13:08] <perlsyntax> anyone
[13:08] <farf> ok, ive installed ubuntu and gone through the setup, however when i try to reboot the system into the desktop, i get a popup about it running in low-graphics mode, and asks me to configure the video settings, when i click ok i get 3 options, run in low graphics mode, reconfigure graphics, or troubleshoot, i get a loop when i try to run in low graphics (goes back to telling me its running in low graphics) and it wont let 
[13:09] <neiljay> Is there a problem with the fiesty repositories at the mo, i get this when trying to update : "Failed to fetch http://gb.archive.ubuntu.com/ubuntu/dists/feisty/main/binary-i386/Packages.gz  404 Not Found"
[13:09] <perlsyntax> anyone use a aircard with linux before?
[13:09] <Milk_Rulz> KingWilliam: opened system > preferences > appearance, dragged 84355-diehard.tar.gz onto it
[13:09] <pecko> jrib: i just know ther's something like udevd-event :run_program: 'path/to/the/program' abnormal exit
[13:10] <jrib> neiljay: feisty is end of life.  It is no longer supported.  You need to upgrade as this means you are no longer receiving security upgrades
[13:10] <jrib> !upgrade > neiljay
[13:10] <pecko> jrib: and then something about /bin/sh that it cannot be found and permission denied
[13:10] <Milk_Rulz> KingWilliam: then I get "Installation for theme "diehard" failed.
[13:10] <Milk_Rulz> Can't move directory over directory"
[13:11] <jrib> pecko: it's not hard to give exact errors, paraphrasing them usually just causes confusion.  I can't help you like this.  But include what you know in your questions I guess and maybe someone else can recognize the issue
[13:11] <KingWilliam> Do you already have the theme installes Milk_Rulz ?
[13:11] <Milk_Rulz> I have the emerald theme installed
[13:12] <vinja-sheep> Night, world.
[13:12] <vikku> jrib : http://pastebin.com/d61305431
[13:12] <KingWilliam> I think they are fighting for some reason. Wait a sec pls
[13:12] <farf> anyone know anything about my graphics issue?  i cant get to the command prompt (or at least dont know how), and i cant do anything through the popup on boot about low graphics mode
[13:13] <jrib> vikku: looks like xv is in there.  Does « gmplayer » give you an error?
[13:13] <vikku> lemme c
[13:13] <pecko> jrib: if u don have running os its very very hard to give exact errors. but i still can take a paper and pen and write down them from screnn:P
[13:13] <KingWilliam> Milk_Rulz, I am not sure, but this little trick might help you
[13:14] <jrib> pecko: when you have exact errors, you can usually just google them, that's why they're so helpful :)
[13:14] <pecko> jrib: or i can make a picture with my camera:D
[13:14] <KingWilliam> Milk_Rulz, open the tar.gz file with file-roller (just double-click the file) and rename the folder called "diehard" to something else
[13:14] <pecko> jrib: ive tried... but no result. its why im here
[13:14] <vikku> jrib : http://pastebin.com/m64d5f2bd
[13:14] <KingWilliam> Milk_Rulz, close the archive and try to install again (either by drag n drop or by the button)
[13:14] <vikku> it did fiv some err
[13:15] <vikku> giv*
[13:15] <jrib> vikku: and « gmplayer -vo xv » ?
[13:15] <Milk_Rulz> KingWilliam: your a genious :P
[13:16] <Milk_Rulz> KingWilliam: but there is 1 last thing it's missing, the transparency :(
[13:16] <Milk_Rulz> KingWilliam: before it didn't have any color, but now it does.
[13:16] <jrib> vikku: never mind, I see "Warning unknown option vo_driver at line 2" now.  Change "vo_driver" to "vo" as that's what it is in mplayer's non-gui conf
[13:17] <KingWilliam> Milk_Rulz, as far as I know GTK themes can not have transperency. But emerald themes do. So you head over to the emerald manager and choose your emerald theme there. I can not perfectly remember but i guess there is a customize button
[13:17] <TecR0c> how do you open a iso image through the terminal?
[13:17] <jrib> vikku: or better yet, just delete that line in ~/.mplayer/gui.conf and add the following to your ~/.mplayer/config:  vo=xv
[13:18] <KingWilliam> Mil_Arg, In the customize window you can do whatever you want with it. (like adding transparency)
[13:18] <Jeruvy> TecR0c: http://www.ubuntugeek.com/mount-and-unmout-iso-images-without-burning-them.html
[13:18] <Milk_Rulz> KingWilliam: I'm not finding a customize button, there is an Edit Themes tab and above that an "Emerald Settings" tab
[13:18] <farf> how do i install video drivers without being able to boot to the desktop
[13:19] <clarks> http://paste.ubuntu.com/107309/
[13:19] <KingWilliam> Milk_Rulz, Edit themes will do the trick :D
[13:19] <clarks> can anyone check for me ..and how to fixed it
[13:19] <jrib> clarks: open ~/.ssh/known_hosts in a text editor and delete line 10
[13:20] <clarks> jrib wait
[13:20] <clarks> ~$ open ~/.ssh/known_hosts
[13:20] <clarks> Couldnt get a file descriptor referring to the console <--this is the answer
[13:20] <filosofico> hi! ... How I can use update-alternatives to move to java5 without change all the entries one by one (java, javac, javadoc and so on) ?
[13:21] <jrib> clarks: use « gedit » not « open »
[13:21] <Milk_Rulz> KingWilliam: I'm on edit themes, now what?
[13:21] <jrib> !multijava | filosofico
[13:21] <directhex> ladies & gents, may i present to you, a shameless plug: http://ubuntuforums.org/showthread.php?p=6584115
[13:21] <OllyM> hi chaps Whats the best way to install all OS patches and fixes for Ubuntu LTS **without*** overwriting any configs with the defaults that come with the updates?? Is it to use -safeupgrade ?
[13:22] <filosofico> jrib: thanks, I know the update-alternatives command, I'm asking about use of it ...
[13:22] <directhex> OllyM, apt will not overwrite config files which you have not changed
[13:22] <clarks> jrib, how to fine line 10?
[13:22] <directhex> HAVe changed, even
[13:22] <jrib> filosofico: look closely at what ubottu said
[13:22] <KingWilliam> Milk_Rulz, since I don't use compiz anymore i don't know.
[13:22] <directhex> OllyM, if you change a config file, then there's an md5sum mismatch and apt leaves it alone
[13:22] <farf> how do i get to the terminal without being able to boot into ubuntu??
[13:22] <jrib> clarks: press the down arrow 10 times
[13:22] <jrib> clarks: or 9 I guess.
[13:23] <Milk_Rulz> :(
[13:23] <Theaxiom> Anyone know why I don't have permission to post in the ubuntu forums even after verifying my account?
[13:23] <jrib> Theaxiom: #ubuntuforums
[13:23] <Theaxiom> jrib: thanks
[13:23] <farf> how do i get to the terminal without being able to boot into ubuntu??
[13:24] <Milk_Rulz> KingWilliam: well, you have pretty much done 90% of the whole theme for me, thanks for all of your help
[13:24] <vikku> jrib : done .... but  there is  one more thing like there is a vcd in my cdrom and im not able to input it to mplayer , /media/cdrom doesnt list it ....do i need to install some codec ?
[13:24] <Deon> Ubuntu boots and runs great.. but no internet :(
[13:24] <pentaside1> #wine
[13:24] <pentaside1> ops
[13:24] <Deon> When I switch to ubuntu, the light on my NIC goes out and the one on the router goes out
[13:24] <Deon> but its detecting eth0 and showing me a MAC?
[13:24] <pentaside1> Is there an IRC can for Wine?  Or should I ask that question here
[13:25] <filosofico> jrib: I'm sorry, thanks for the answer :-)
[13:25] <KingWilliam> Milk_Rulz, you are welcome ;)
[13:25] <Deon> pentaside1: #wine is for Wine :)
[13:25] <Deon> pentaside1: #winehq rather
[13:26] <farf> everytime my computer boots i get a screen saying running in low graphics, i cant go any further than this, i cant use any of the options it gives me, what can i do
[13:26] <Milk_Rulz> Does anybody here know how to make transparent windows?
[13:26] <jrib> Milk_Rulz: you may want to try #compiz-fusion
[13:26] <Deon> KingWilliam: btw, thanks heaps for the grub advice... boots fine now :)
[13:27] <Dr_Willis_AAO> compiz  has features to  transparent-ify windows on the fly :)
[13:27] <vikku> jrib : done .... but  there is  one more thing like there is a vcd in my cdrom and im not able to input it to mplayer , /media/cdrom doesnt list it ....do i need to install some codec ?
[13:27] <KingWilliam> Deon, welcome mate :D
[13:28] <Kunalagon> hello, is it possible to share folder using samba in latest ubutnu ?
[13:28] <jrib> vikku: vcd?  So not encrypted using css right?  Try mplayer dvd://
[13:28] <Kunalagon> I mean UBUNTU
[13:28] <jrib> Kunalagon: right click -> sharing options
[13:28] <Deon> KingWilliam: NIC problems instead now :) oh well.. ill get there eventually
[13:28] <Kunalagon> I mean Nautilus
[13:28] <Jeruvy> !samba > Kunalagon
[13:28] <Kunalagon> jrib: and which package do I have to compile to get that in manualy compiled Nautilus?
[13:28] <vikku> jrib: dvd:// ... didnt get it
[13:29] <jrib> Kunalagon: nothing
[13:29] <jrib> vikku: you tried « mplayer dvd:// » ?
[13:29] <Kunalagon> jrib: I compiled Nautilus, and I dont have any share options on right click
[13:29] <jrib> vikku: or maybe: « mplayer dvd://1 »?  I've never played a vcd.  So if those don't work, try asking the channel or #mplayer again
[13:30] <jrib> Kunalagon: ok, next question.... why did you compile nautilus?
[13:30] <Kunalagon> because I need to do that
[13:30] <farf> how can i get passed the notification of ubuntu running in low graphics mode
[13:30] <jrib> Kunalagon: if you want me to help you, please answer my questions....
[13:31] <isojussi> where i can find repos to update 7.04 to 7.10 at first
[13:31] <Kunalagon> because I am using Gentoo, and there is no any binary packages. And guys on  #gentoo knows nothing about nautilus sharing folders using samba
[13:31] <jrib> isojussi: read the link ubottu gave you about GutsyUpgrades
[13:31] <Kunalagon> jrib:
[13:31] <Milk_Rulz> KING! I GOT IT! :D
[13:31] <jrib> Kunalagon: #gentoo for gentoo support, this is #ubuntu
[13:31] <isojussi> can you repost it
[13:31] <Pici> !upgrade | isojussi
[13:32] <Dr_Willis_AAO> Kunalagon,   i would  say check #gnome
[13:32] <Kunalagon> jrib: no help on #gentoo
[13:32] <rodolfo> does anybody here know how i can create my own torrent using Transmission?
[13:32] <jrib> Kunalagon: in ubuntu, you can « apt-get source nautilus » and read debian/rules to see how it was compiled
[13:32] <Kunalagon> I ask there many times
[13:32] <farf> does nobody know anything about my problem or does everyone just think its so simple they're too good to answer?
[13:32] <Kunalagon> jrib: ok, I'll check that
[13:32] <Dr_Willis_AAO> farf,  ive no ideas .. happy?
[13:33] <farf> yes, i am. can you suggest any further line of enquiry or places that i might find a solution.  ive been going through all the support documents on ubuntu.com since last night, every support document assumes i can get to the terminal and input commands, however ive no idea how to do that w/o being able to boot in
[13:33] <vikku> jrib: this is how it looks , soething did try to cum up but exited as soon as it came http://pastebin.com/m727e44f1
[13:34] <matisse> How do I search in files?
[13:34] <jrib> matisse: grep
[13:34] <ezerhoden> farf: what is the problem?
[13:34] <jrib> vikku: don't know then.  You should add the "vo=xv" to your ~/.mplayer/config though since you are using x11 there
[13:35] <pirx_> dpkg --get-selections   <- is this the way to get a list of installed packages in my system?
[13:35] <vikku> jrib: ok lemme try
[13:35] <marek_> hi, i have a problem with my wifi card, it doesnt connect to networks anymore, please help me
[13:35] <OllyM> thanks guys, so what IS the best command to use to update ubuntu with all OS level patches and fixes/updates
[13:35] <OllyM> ?
[13:36] <matisse> jrib: how do I do that recursively ?
[13:36] <jrib> OllyM: sudo apt-get dist-upgrade
[13:36] <jrib> matisse: -R
[13:36] <farf> i just installed ubuntu last night, when booting into the desktop for the first time i get a notice saying its running in low graphics mode, the options it gives to reconfigure/etc do not work, i dont know how to get to a place to input some of the commands ive found on support documents, i cant get passed the notification to get into the desktop
[13:36] <ezerhoden> pirx_: dpkg -l > installedpackages  you will then have a file with everything and versions
[13:37] <farf> the only thing i can get to work so far is opening xorg.conf and seeing that......
[13:37] <ezerhoden> farf: what about appending the grub boot line with single ? this will boot you to a root command prompt and you should have access from there
[13:37] <sipior> farf: does Ctl-Alt-F1 get you to a console?
[13:38] <farf> yes it does, thats exactly what i needed to at least put stuff in, ty
[13:38] <vikku> hey jrib : picture just popped up but voice cuts
[13:38] <farf> and ezerhoden, this is my first experience w/ ubuntu, so ive no idea what most of what you said means :p
[13:38] <vikku> jrib: its playing ...bu voice hangs
[13:39] <jrib> vikku: I don't know
[13:39] <matisse> jrib: does -r hang up fast computer ?
[13:39] <jrib> matisse: depends on the fastness I guess
[13:40] <vikku> jrib: nyways thnks for taking it so far
[13:40] <hwilde> how am I supposed to know which nvidia to install? nvidia-glx-96 nvidia-glx-180 nvidia-glx-177 nvidia-glx-71 nvidia-glx-173
[13:40] <hwilde> lspci says my graphics card is nVidia Corporation Quadro FX 570
[13:41] <Dr_Willis_AAO> the  nvidia guide says :)
[13:41] <hwilde> Dr_Willis_AAO, I should expect such an answer this early huh
[13:41] <hwilde> I just want both of my monitors to work is that too much to ask
[13:41] <hwilde> nvidia-settings wont run because nvidia is not in use
[13:41] <hwilde> nvidia-xconfig trashes the graphical display
[13:41] <Dr_Willis_AAO> hwilde,  install the latezt and work down
[13:41] <hwilde> how do I know which is the latest
[13:42] <Dr_Willis_AAO> bigger #?
[13:42] <quibbler> hwilde, 180
[13:42] <jrib> hwilde: apt-cache show PACKAGE also says what cards it supports.  Or just use System -> Administration -> Hardware Drivers
[13:42]  * hwilde shudders - i have to use gui 
[13:43] <hwilde> apt-cache show nvidia-glx-180 | grep "Quadro FX 570"      looks like a hit
[13:44]  * hwilde crosses fingers...
[13:45] <lunix> Hi ubuntu folks:)     anyone can help me connect to my wireless network from ubuntu 8.10 server edition  (no GUI)   The wireless adapter is found and drivers seem to work flawlessly.. this is what I have done so far:  ifconfig wlan0 down        then..  iwconfig wlan mode ad-hoc  (hmm ad-hoc??)  then...   iwconfig wlan0 "network name"     then  iwconfig wlan enc a1b2c3d4e5     then ifconfig wlan0 up    ..  the adapter goes grazy blinking,, bu
[13:45] <lunix> t no internet connection :|
[13:45] <matisse> jrib: or maybe: is it a bad idea to grep recursivly in /etc ?
[13:46] <Gnea> !server
[13:47] <Kunalagon> jrib: is this source used in latest Ubuntu: https://launchpad.net/ubuntu/jaunty/+source/nautilus-share/ ?
[13:47] <jrib> Kunalagon: yeah, in the devel version
[13:47] <hwilde> ok I'm in nvidia-settings now.   what is this little checkbox Enable Xinerama?  do I want this?
[13:47] <farf> can anyone tell me a website thats basically a complete idiots guide on installing video drivers :p
[13:48] <jrib> !ati | farf
[13:48] <Kunalagon> jrib: so, it works with Nautilus 2.24 ?
[13:48] <hwilde> !nvidia | farf
[13:48] <farf> ive been looking at that
[13:48] <farf> and it only tells you how to instal it by clicking in the desktop....i cant get to the desktop
[13:48] <Wndows_Error> what command line program will assemble perl?
[13:48] <jrib> Kunalagon: I don't know.  Check the version of the nautilus package in jaunty
[13:48] <lunix> #ubuntu+server
[13:48] <farf> but then if i look at the manual installation guide...its way over my head basically
[13:49] <hwilde> !find nautilus jaunty
[13:49] <vikku> its like some one looping the track song for mplayer
[13:49] <jrib> farf: use vesa as your driver to get to the desktop
[13:49] <chandru> do anyone  know how to remove bluetooth software from ubuntu 8.10 and replace with same software from ubuntu 8.04 ?
[13:50] <farf> how do i specify that, i can only use the command prompt, or edit the xorg.conf file
[13:50] <quibbler> lunix, /join ubuntu-server
[13:50] <Kunalagon> jrib: it is some 2.25 version of nautilus. Do you know where I can find source of nautilus-share used in Ubuntu 8.10 ?
[13:50] <jrib> Kunalagon: you linked to it already.  Use the intrepid sources
[13:51] <jrib> Kunalagon: packages.ubuntu.com may be easier to use
[13:51] <Kunalagon> jrib: oh, great, thank you !
[13:51] <quibbler> lunix, /join #ubuntu-server
[13:53] <RRos> sipior, about the kernel panics... I upgraded to kernel 2.5.27-11 and so far so good :)
[13:53] <hwilde> alright twinview in full effect~!
[13:53] <Blackdogg> port 27015 is used on my network card, but no app is using it, how can i reset it?
[13:53] <hwilde> one more question - how to I forcefully expire the sudo authentication?
[13:53] <quibbler>  /join #ubuntu-server
[13:53] <zamba> is it possible to set up a user with a blank password?
[13:53] <sipior> RRos: glad to hear it. here's hoping you remain crash-free :)
[13:53] <zamba> so the user only needs to click on an icon to log on? kind of like *shrug* windows does it?
[13:53] <Pici> hwilde: sudo -K
[13:53] <hwilde> zamba, you can do autologin if you want
[13:54] <hwilde> Pici, gracias amigo
[13:54] <zamba> hwilde: well.. i still want the option of logging in as different users..
[13:54] <Pici> hwilde: try -k  first though.
[13:54] <hwilde> -K works
[13:54] <zamba> hwilde: so an option that says "click here to log on as x or type in your username below"
[13:54] <michel> type/join#ubuntu.fr
[13:54] <RRos> sipior, thanks for your help!
[13:55] <michel> #ubuntu.fr
[13:55] <hwilde> zamba, i wouldnt recommend it but http://ubuntuforums.org/showthread.php?t=17520
[13:55] <hwilde> !fr | michel
[13:55] <hwilde> michel,    /join #ubuntu-fr
[13:55] <farf> ok im trying to enable the vesa driver, and im following the guide to edit the xorg.conf file, i typed sudo nano /etc/X11/xorg.conf into the command prompt and it opened the file however ive got no text or anywhere to change the line to vesa?
[13:55] <michel> ubottu comment se logger sur ubuntu.fr ?. Merci
[13:56] <hwilde> michel,    /join #ubuntu-fr
[13:56] <michel> michel, /join#ubuntu.fr
[13:57] <michel> rejoindre #ubuntu.fr
[13:57] <M25> ok, if anybody can figure out how to fix this, I'd appreciate it: http://pastebin.com/m28524fed
[13:57] <M25> ufw, for the first time ever in my experience, just simply fails
[13:57] <hwilde> michel:    /join #ubuntu-fr
[13:58] <michel> #ubuntu-fr
[13:58] <michel> !fr
[13:59] <hwilde> michel, !   appuyez sur ces touches dans l'ordre     /join #ubuntu-fr  <enter>
[13:59] <michel> Comment rejoindre le canal ubuntu.fr? Merci
[13:59] <hwilde> Je vous ai dit à plusieurs reprises et maintenant je pense que vous êtes juste ennuyant
[13:59] <michel> c'est ce que je fais . je suis peut -etre ennuyant , mais ne le fait pas exprès;
[14:00] <hwilde> lol
[14:00] <hwilde> dactylographiez ceci dans votre clavier appuient sur exactement alors la touche de pénétrer dans:   /join #ubuntu-fr
[14:00] <michel> hwilde, je tape sans arret /join#ubuntu-fr e trien ne se passe.
[14:00] <hwilde> exactement!
[14:01] <michel> je fais cela depuis le début
[14:01] <hwilde> vous avez besoin d'un espace entre la commande de jointure et le canal
[14:01] <MK13> why the foreign languages?
[14:01] <michel> je recommence
[14:01] <hwilde>    /join <space> #ubuntu-fr
[14:01] <Pici> hwilde: Please take this to pm
[14:01] <hwilde> not my fault he can't join the channel :/
[14:02] <hwilde> anyways i'm in twinview so peace out thnx
[14:02] <weboide> michel: faut que tu tape exactement ca: /join #ubuntu-fr
[14:02] <michel> hiwilde, regardez bien/ je fais exactement ce que vous me dites et rien ne se passe
[14:02] <marushin> join german-bash
[14:03] <weboide> Ok, we did it with michel, he's in ubuntu-fr now :)
[14:03] <M25> woot, bilinguality ftw
[14:04] <weboide> M25: for sure :p
[14:05] <M25> any ufw experts out there that can tell me what I'm doing wrong here: http://pastebin.com/m28524fed
[14:05] <bashca>  The PPP daemon has died: No root priv error (exit code = 3) ?? any help ??
[14:06] <Pici> M25: Generally, nmapping yourself gives inaccurate results. Try from a different computer.
[14:06] <sipior> bashca: first guess is that you were running the ppp daemon without using sudo
[14:06] <farf> when trying to edit my xorg.conf to use vesa drivers, i dont have the line to specify driver, how can i change it
[14:06] <bashca> sipior, yes
[14:06] <breaker> Hello, Ive got a issue with ubuntu server, got a port active in netstat -ap but no process are using it, since I need that port, I need it removed, what can I do?
[14:06] <bashca> sipior, am trying gnome-ppp
[14:07] <Quintasan> Hmm, I've installed LinuxWacom reffering to Ubuntu Wiki, the tablet works but wacomcpl shows there are no devices, I've added entries to xorg.conf by hand, still nothing
[14:07] <M25> pici, that's the only computer behind my home firewall that I have ssh access to, I'm at college, and my firewall blocks all ports but ssh.  Any ideas how I can, say, bounce the nmap off my firewall to get accurate out-of-computer results?
[14:08] <Pici> bashca: try prefixing your netstat command with sudo, it may show a process that you could not see otherwise.
[14:08] <breaker> same thing, only shows "-"
[14:08] <breaker> no process
[14:09] <Pici> M25: I'm not sure how exactly to do that with nmap, sorry.
[14:09] <TT> hello
[14:09] <M25> Pici: thanks anyway, at least I know it's an nmap problem now
[14:09] <M25> Quintasan: if the tablet works, what's the problem?
[14:10] <Quintasan> M25: no pressure sensitivity
[14:10] <bashca_> sipior, thanks i resolved  it
[14:10] <Pici> M25: Not exactly, it just telling you that ufw is still allowing connections from 127.0.0.1, which you usually have no reason to block.
[14:10] <M25> Quintasan: not even in gimp?
[14:10] <Quintasan> M25: also cant bind keys on pad to launch gimp and inkspace
[14:10] <Quintasan> M25: nope
[14:11] <Quintasan> I've installed drivers from prebuilt dir
[14:11] <M25> Quintasan: hm.  I had to set up gimp special to get pressure sensitivity, in its preferences pane
[14:11] <M25> Pici: gotcha
[14:12] <M25> Quintasan: I did my wacom setup (for hardy and I think intrepid) from a wiki guide, I'll link you in a sec
[14:12] <breaker> Pici do u know ? the sudo netstat -ap shows all hte ports current, but the port I asked about only shows "-" in process
[14:13] <hwilde> I installed epiphany but it doesn't show in the menu =-  waht is the command to update the menu applications?
[14:13] <Milk_Rulz> is there a key shortcut to open terminal
[14:13] <hwilde> shift+ctrl+n
[14:13] <Milk_Rulz> thank you
[14:13] <OllyM> why does updating ubuntu fill me with such fear ?
[14:13] <Milk_Rulz> no wait
[14:13] <Milk_Rulz> that creates a new folder
[14:13] <hwilde> Milk_Rulz, if you are in nautilus yeah
[14:13] <Quintasan> M25: I should remove the wacom-tools and input-wacom drivers before installing the linuxwacom? Wiki didnt said that :S
[14:14] <Mood> hello all- is there an easy way of listing current ftp users connected?
[14:14] <M25> hwilde: usually installing updates the menu, you might just need ot make a custom shortcut
[14:15] <matisse> is there something like "removeuser"
[14:15] <Pici> breaker: What state is the connection with the '-' in?
[14:15] <hwilde> ok so with firefox and twinview, why can I only open it in one monitor?  I can open xchat, terminal, almost anything else in both simultaneously
[14:15] <erry> i need to clear my clipboard
[14:15] <erry> entirely
[14:15] <erry> plz
[14:15] <erry> help
[14:15] <matisse> (as there is adduser)
[14:15] <M25> Quintasan: http://ubuntuforums.org/showthread.php?t=765915
[14:15] <Mood> matisse: userdel
[14:15] <erry> hello
[14:15] <erry> heklp
[14:15] <Dr_Willis_AAO> hwilde,  huh? i just open the apps and drag them over to the other moniotr.
[14:15] <breaker> none Pici
[14:15] <matisse> erry: click on the icon
[14:15] <erry> huh?
[14:15] <Dr_Willis_AAO> hwilde,  you did restart the x server after enabling twinview with the nvida-settings tool?
[14:15] <erry> Matsee what icon
[14:15] <erry> matisse,
[14:15] <erry> what icon
[14:15] <Dreamglider> im looking for some software that will set the proxy setting on all network using software to the proxy i specify so i dont have to open firefox switch proxy, open skype set proxy, open ...etc.... is there any such program ?
[14:16] <M25> erry: just copy something else
[14:16] <erry> no
[14:16] <erry> i want to get rid of the whole data
[14:16] <erry> nothing there
[14:16] <matisse> erry: are you in gnome or kde ?
[14:16] <erry> gnome
[14:16] <KRF> !enter | erry
[14:16] <Dreamglider> at home/campus i dont need a proxy but at school i need to set the proxy on everything
[14:16] <matisse> then i dont know where the icon is
[14:17] <KRF> farewell, erry
[14:17] <farf> how do i use vesa drivers, ive found no documentation using google or ubuntu.com
[14:17] <matisse> Mood: thx
[14:17] <Dr_Willis_AAO> farf,  normally edit xorg.conf and set the driver line to be like       driver 'vesa'
[14:17] <Mood> np :)
[14:18] <Dr_Willis_AAO> vesa is normally used when al else fails :)
[14:18] <dennda> Is it possible now to have my swap on an lvm inside an encrypted partition in such a way that suspend to disk still works?
[14:18] <farf> what if my xorg.conf doesnt have the driver line?
[14:18] <Pici> farf: add it.
[14:18] <Dr_Willis_AAO> denna thats  sort of scary :)
[14:19] <M25> dennda: lvm?
[14:19] <farf> so basically just Section "Driver" then identifier "Vesa"?
[14:19] <dennda> M25: logical volume management
[14:19] <Pici> breaker: I'm not sure then.  I was going to say that if it was in a FIN state then it was just the kernel keeping it open for some reason, and that an application wasn't really using it.
[14:19] <troythetechguy> I'm putting together a LAMP server at work and want to make sure I have the latest releases: apache2, php5, mysql5.
[14:20] <breaker> mkey Pici np
[14:20] <dennda> M25: encrypted partition contains lvm, lvm contains two partitions. one swap, one /home. benefit: only one passphrase needed
[14:20] <Dr_Willis_AAO> farf,  my xorg.conf  as an example -->  http://pastebin.com/f3da99899
[14:20] <chandru> hi friends.. can any one tell me how to remove the error bug when trying to open a drive for first time ?
[14:20] <chandru> Unable to mount location
[14:20] <chandru> Internal error: No mount object for mounted volume
[14:20] <chandru> this the eroor i am getting
[14:20] <M25> dennda: I don't know drive-level-encryption, but that does sound pretty cool
[14:21] <Reenen> hi, I am looking for a windows implemetation of the ubuntu 8.10 magnification tool (press hyper and scroll mouse wheel)
[14:21] <genio> I'm going to strangle X windows.
[14:21] <dody_> I'm not
[14:21] <Reenen> anyone know of it?
[14:21] <farf> that doesnt look anything like mine :p
[14:21] <dennda> M25: I'm doing that for quite some time already. Just unsure whether suspend to disk works then
[14:21] <Pici> Reenen: Try asking in ##windows
[14:21] <KingWilliam> Reenen, it is in compiz
[14:21] <KingWilliam> Reenen, do you use compiz?
[14:21] <dennda> M25: since when booting, it tries to read the resume data from the swap; and I don't know if it's already available at that point
[14:22] <M25> dennda: you can always just try it, or would that corrupt the partition?
[14:22] <Quintasan> M25: which version of linuxwacom you use? 0.8.2?
[14:22] <farf> is there a keypress i can do to reboot ubuntu w/o doing hard/soft reboot (as in ctl alt del in windows)
[14:22] <genio> It won't use my NVIDIA card and both monitors.
[14:22] <dennda> M25: no, but potentially waste my time
[14:22] <dennda> i'll just try it now, though
[14:22] <M25> Quintasan: I just followed that wiki link I pasted and did what it told me, then custom-configured gimp
[14:22] <bonhoffer> i just created a mymod.conf in my mods-available directory -- now i want to enable it -- sudo a2enmod mymod produces ERROR: Module mymod does not exist!
[14:23] <Jeruvy> Reenen: try holding down the windows key and use your scroll wheel
[14:23] <zimbres> I do not understand the make utility very well, I changed some files in a directory and when I typed "make" I got the message "nothing to be done for all" How do I mke it compile again?
[14:23] <KingWilliam> Jeruvy, what you tell to Reenen only works when compiz is running
[14:23] <genio> Is there somewhere that I'm unaware of that gives dual monitor setup help for 8.10?  All of the other sites offer suggestions that do not work in 8.10
[14:23] <Reenen> Jeruvy: Yes, on ubunty it works wonderfully, I want it on windows XP
[14:23] <Reenen> *ubuntu
[14:23] <M25> zimbres: you need a makefile
[14:23] <Jeruvy> Reenen: ##windows
[14:23] <Pici> zimbres: make clean usually removes the compiled code, then try `make` again.
[14:24] <KingWilliam> Jeruvy, I knew such a tool. One sec
[14:24] <zimbres> Pici: Thanks, This is what I want
[14:24] <dody_> yes
[14:25] <dody_> yes
[14:25] <genio> nvidia-xconfig does absolutely nothing
[14:25] <fivemack> hello
[14:25] <fivemack> what has happened to http://gb.archive.ubuntu.com/ubuntu/feisty?
[14:25] <KingWilliam> Reenen, you are looking for a tool called Zoomit
[14:25] <Reenen> thanks KingWilliam
[14:26] <fivemack> I get many 404s when I try apt-get update on my feisty machine
[14:26] <KingWilliam> Reenen, your welcome
[14:26] <M25> maybe they canceled the feisty repository?
[14:26] <deany> isnt feisty eol
[14:26] <fivemack> the directory isn't there, but dapper, gutsy, hardy, intrepid are
[14:26] <matisse> How do I remove a user of a group ?
[14:26] <farf> ok so i added the driver line to xorg.conf and restarted and now i get an error about low graphics mode, and (EE) problem parsing the config file, (EE) error parsing the config file
[14:27] <Pici> fivemack: Feisty has reached its end of life, and it is no longer supported.
[14:27] <Pici> !feisty | fivemack
[14:28] <JesperHansen> at what time would it be acceptable to repeat a quest in here not answered?
[14:28] <fivemack> oh, ok, so I have to reinstall the system from scratch.  happy happy joy.
[14:29] <genio> farf: welcome to my world
[14:29] <dekkong> hello guys! my m8 is trying to play an mkv file in ubuntu 8.10 with VLC and he has no sound
[14:29] <JesperHansen> dekkong: try playing it in totem first to see what codecs it suggests
[14:30] <dekkong> JesperHansen: I think he tried totem but in totem the movie lags
[14:30] <dekkong> JesperHansen: but the sound did work
[14:30] <bn43> hi does anyone know whether u can configure wvdial to dial on disconnect and startup?
[14:30] <sipior> fivemack: why, is upgrading to the next version not working for you?
[14:31] <dekkong> JesperHansen: you got any clues?
[14:31] <Zzeiss> Is there a way to tell the kernel that it should NOT use the suspend-to-disk image during a reboot, but rather go through the full reboot process again?
[14:32] <JesperHansen> dekkong: no idea then
[14:32] <Milk_Rulz> how do I add startup items?
[14:32] <JesperHansen> dekkong: would probably try mplayer as the first
[14:33] <erUSUL> Milk_Rulz: System>Preferences>Session
[14:33] <bn43> hi does anyone know whether u can configure wvdial to dial on disconnect and startup?
[14:33] <JesperHansen> Was wondering if there's an updated version of https://help.ubuntu.com/community/CustomRestrictedModules#Modify%20debian/rules somewhere. abi_version doesn't exist in the enlisted file debian/rules
[14:34] <troynt> anyone know what repository start-stop-daemon is located?
[14:34] <troynt> or where I can find their website to download it and install from source..
[14:35] <CrownAmbassador1> bn43: You should be able to add the command to system-preferences-sessions
[14:35] <M25> troynt: try google?
[14:35] <Yann1> I don't know what this means but it worked before. I removed acroread, installed the version from the medibuntu repros and checked the 32-bit dependencies but it doesn't helped :(
[14:35] <oCean_> troynt: you mean init daemon?
[14:35] <sisto> anyone know how to mark my own messages in a different color in x-chat? right now they show up in gray. but i would like them to have a better highlighting color
[14:35] <Loof> Anyone know how to get the 'Terminal Service Client' to stop retrying on disconnect or close?
[14:36] <bn43> CrownAmbassador1: am only using command line - no gui
[14:36] <M25> sisto: ask in #xchat?
[14:36] <sisto> M25: ok i'll try that thx
[14:36] <CrownAmbassador1> Can anyone of you post your original /etc/network/interfaces file please? I don't have my cd with me but need the original contents.
[14:37] <CrownAmbassador1> bn43: okay. Sorry then I don't know. :P
[14:37] <bn43> thanks
[14:37] <dekkong> hello guys! my m8 is trying to play an mkv file in ubuntu 8.10 with VLC and he has no sound
[14:38] <zamba> is it possible to permanently map the special folder Document to a samba share?
[14:38] <M25> dekkong, does he have sound with other applications?  also, does he have firefox open playing, say, a youtube video at the same time?
[14:38] <zamba> Documents*
[14:38] <erUSUL> CrownAmbassador1: on modern releases it has only two lines 1 auto lo 2 iface lo inet loopback
[14:38] <CrYsIsX> hello, when i installed ubuntu 8.10 via windows vista and restarted to get on, i got a lil prob, it took me to DOS after booting =\
[14:39] <dekkong> M25: yes he has totem there he has sound but the movie lags... and he is using alsa
[14:39] <CrownAmbassador1> erUSUL: Thanks. That is what I thought. :-D
[14:39] <CrYsIsX> anybody who can help me?
[14:39] <mysticdarkhack> Morning all?
[14:39] <M25> dekkong: that's a vlc configuration problem probably.  see if you can use different sound setup options in vlc
[14:39] <Quintasan> M25: ok, I see stylus and earser in wacomcpl, no pad but I can live without it, what you set up in gimp? I cant seen anything regarding tablet senitivity
[14:39] <M25> CrYsIsX: you sure it's not just a "choose operating system" screen?
[14:39] <dekkong> M25: ok
[14:40] <M25> Quintasan: look under Inputs, I think
[14:40] <CrYsIsX> Stuff?: when i installed ubuntu 8.10 via windows vista and restarted to get on, i got a lil prob, it took me to DOS after booting
[14:40] <erUSUL> CrYsIsX: you used wubi ?
[14:40] <M25> it was weird, I had to fiddle with it, but I did get it working eventually
[14:40] <CrYsIsX> erUSUL: What?
[14:41] <mysticdarkhack> anyone own sony vaio z?
[14:41] <erUSUL> !wubi | CrYsIsX
[14:41] <troynt> anyone know what repository start-stop-daemon is located in OR where to find start-stop-daemon to install from source?
[14:42] <CrYsIsX> erUSUL: No, i juts downloaded the ubuntu 8.10  from here http://www.ubuntu.com/getubuntu/download and installed it via windows
[14:42] <Quintasan> M25: grrr, still no senitivity
[14:42] <oCean_> troynt: "init" is the process mgmt daemon
[14:42] <Pici> CrYsIsX: Did you run an installer within windows? or did you boot from the cd?
[14:42] <CrYsIsX> Installer
[14:42] <M25> Quintasan: sorry man, I sold my wacom after I realized I can't draw worth anything.  Good luck man
[14:42] <Pici> CrYsIsX: That would be the aformentioned Wubi method then.
[14:42] <troynt> oCean_: I'm getting "/etc/init.d/vsftpd: 43: start-stop-daemon: not found"
[14:42] <erUSUL> CrYsIsX: if you installed via/within windows you used wubi
[14:43] <M25> CrYsIsX: again, are you sure it's DOS and not just a "choose operating system" screen?
[14:43] <Milk_Rulz> erUSL: thanks, but say if I wanted aMSN to start up automaticly, how would I find the command
[14:43] <CrYsIsX> i did that, booted then
[14:43] <CrYsIsX> went to DOS
[14:43] <troynt> oCean_:  I think it may be a path issue...
[14:44] <troynt> oCean_: thanks
[14:44] <M25> CrYsIsX: did you select windows or ubuntu when it went to dos?
[14:44] <oCean_> troynt: something wrong on line 43 then.. it's not the init daemon
[14:44] <CrYsIsX> Ubuntu
[14:44] <troynt> oCean_:  Yea I forgot to do a sudo :-x
[14:44] <erUSUL> Milk_Rulz: most likely is "amsn"
[14:44] <Pici> troynt: start-stop-daemon is included in the dpkg package, which I assure you is installed.
[14:44] <toddoon> hi, how do i change resolution in tty?
[14:44] <M25> CrYsIsX: ok, firstly, that's not DOS, that's BASH you're seeing.  Second off, does it stop scrolling text?  if so, what's the last 2 lines it writes?
[14:45] <troynt> Pici: Yea, it is working now, I just forgot to do a sudo, so my path was messed up
[14:45] <oCean_> troynt: yep, that might help :)
[14:45] <CrYsIsX> its an error
[14:45] <Pici> troynt: Ah, thats good then.
[14:45] <M25> CrYsIsX: you know how to use pastebin?
[14:45] <CrYsIsX> no
[14:46] <M25> go to pastebin.com, copy/paste/type in the error (last couple lines of output) then hit Send.  Then paste the URL that it takes you to (which will contain that message) in here, so we can see it.  cuts down on text in the room
[14:47] <M25> go to pastebin.com, copy/paste/type in the error (last couple lines of output) then hit Send.  Then paste the URL that it takes you to (which will contain that message) in here, so we can see it.  cuts down on text in the room
[14:47] <M25> sorry for the repeat, he left/returned
[14:47] <Pici> M25: A Pastebin isn't going to help much if all he has is an error and no graphical environment.
[14:47] <CrYsIsX> Pici: anything i can do?
[14:47] <Pici> CrYsIsX: What does the error say?
[14:47] <whuffor> CrYsIsX: You may as well use the ubuntu pastebin :) http://pastebin.ubuntu.com/
[14:48] <CrYsIsX> umm, i dont remember, sec ima reboot and come back to tell u
[14:48] <M25> Pici: right, sorry, used to being able to pastebin from the command line
[14:48] <zamba> is it possible to mount a nfs share upon logon?
[14:48] <zamba> i'd like to mount a user's home directory over nfs when he/she logs on
[14:48] <Dr_Willis_AAO> zamba yes - in fstab
[14:49] <zamba> Dr_Willis_AAO: but that's not per-user
[14:49] <jb-rite> Howdy folks.
[14:49] <Dr_Willis_AAO> normally one has home on a NFS server
[14:49] <nobu> #fpf
[14:49] <Dr_Willis_AAO>  all of /home/
[14:49] <zamba> Dr_Willis_AAO: i don't want all of home.. i just want one user
[14:50] <Dr_Willis_AAO> how is gdm/kdm gouing to know the default window manager and stuff.. BEFOR the users home is even there? I dont see it happening
[14:50] <jb-rite> I have have just resized a partition on my ubuntu install and installed windows XP on my new partition, reinstalled grub because windows seems to remove it from the MBR  but when I get back into grub I don't see my XP install.
[14:50] <guest_> hi, i need to pit two ip on one NIC from SAME subnet like 192.168.0.1 and 192.168.0.2. how to do it? (U Server)
[14:51] <M25> !grub | jb-rite
[14:51] <farf> when trying to i guess activate nvidia drivers, i go to system, admin, hardware drivers, and click activate, it brings up a box and says download and installing drivers, then disappears and says this driver is not activated
[14:51] <M25> whoops, that's vice-versa
[14:52] <oCean_> zamba: I think it is possible, however it probably requires some scripting and modifying default behaviour of 'login'
[14:52] <sipior> zamba: you can look at setting up an automounter, with each user's home as a separate export. this will not work very well for large numbers of users. also, out of curiosity what advantage do you hope to gain by only mounting the filesystem when the user is logged in?
[14:52] <jb-rite> ubottu: I did lose grub, I've already reinstalled it. -- I'm just not sure why only my ubuntu install is showing up in my grub list
[14:53] <sfuentes> anybody know where the desktop UI settings are stored?
[14:53] <erUSUL> jb-rite: do "sudo update-grub" if that's not enough you will have to edit /boot/grub/menu.lst and add the windows entry
[14:53] <wassy121> zamba: There is a custom pam plugin that mounts SMB directories upon user login.  http://pam-mount.sourceforge.net/ is non-ubuntu, but may be what you need.
[14:53] <erUSUL> jb-rite: the one that is listed in the comments on the file should work
[14:53] <jb-rite> alrighty erUSUL -- thanks, I'll ty that out.
[14:53] <zamba> sipior: well.. i basically want to create a sandbox environment.. since the same user should be logged onto several different computers at the same time.. this is for a student environment, where the students are too young to have a sense of their own username / password, so it's easier to just have one.. i want to use central ldap authentication for the user and when he/she logs on, create a layer upon the directory
[14:54] <zamba> sipior: upon the home directory
[14:54] <sipior> zamba: how young we talking here?
[14:54] <zamba> sipior: 6 to 12 years of age
[14:54] <zamba> sipior: and believe me, we don't have the staff to constantly change passwords and create new users
[14:54] <sipior> zamba: oh, believe me, there'll have no problem handling a username/password
[14:55] <zamba> sipior: well.. we'll have problems with the maintanance
[14:55] <sipior> zamba: you're going to have to do  maintenance anyway.
[14:55] <zamba> sipior: sure.. but it's easier if it's just one user
[14:55] <Zzeiss> Is there any way to NOT reload the hibernated image when you power-up from a save-to-disk hibernate?
[14:56] <zamba> sipior: and the students are used to saving their documents on a shared samba share, so that will remain the way they're used to
[14:56] <wassy121> Zzeiss: maybe your MB/Laptop/whatever has a special key to hold to cold-boot from scratch?
[14:56] <sipior> zamba: then i would say go with the automounter. for only one user, that'll work just fine.
[14:56] <erUSUL> guest_: use eth0 and eth0:0 as ifaces
[14:56] <CyL> How do I set up the proprietary drivers for my video card in ubuntu 8.10?
[14:57] <erUSUL> CyL: which video card ?
[14:57] <CyL> erUSUL: intel 945gm
[14:57] <sipior> zamba: although really, why not just leave the filesystem mounted? i'm not sure i see the point to remounting it constantly...
[14:57] <zamba> sipior: yeah, i'm considering the same..
[14:57] <erUSUL> CyL: that come preinstalled with ubuntu no need to make any additional step (unlike nvidia/ati)
[14:57] <zamba> sipior: just a permanent nfs mount in fstab
[14:58] <CyL> erUSUL: ubuntu 8.04 would just ask me if I would like to stick with the free driver, or switch to the proprietry one...
[14:58] <CrYsIsX> Pici: i get: end_request: I/O error, dev Sr1 sector 9180272
[14:58] <erUSUL> CyL: with a intel card? there are no propietary intel drivers
[14:58] <zamba> sipior: and then some pam magic to create the union/tmpfs layer upon the users /home
[14:58] <dekkong> hello guys! my m8 is trying to play an mkv file in ubuntu 8.10 with VLC and he has no sound
[14:58] <sipior> zamba: that sounds like a plan, i think
[14:59] <CyL> erUSUL: I've just opened /system/administration/hardware drivers, and there is no driver shown
[14:59] <KingWilliam> CyL, jsut for the info, are nVidia and ATI the only ones that require proprietary drivers?
[14:59] <CyL> erUSUL: the free driver will already give me full acceleration?
[14:59] <erUSUL> CyL: yep it should
[14:59] <CrYsIsX> erUSUL: Can u help me on private?
[15:00] <CyL> KingWilliam, erUSUL: sorry bothering you guys, maybe I'm make a confusion with my other computer that got a geforce video card
[15:00] <erUSUL> !pm
[15:00] <erUSUL> CyL: no problem
[15:00] <bakabon> INDONESIA?
[15:00]  * bakabon INDONESIAN
[15:00] <CrYsIsX> !pm erUSUL
[15:00] <Dr_Willis_AAO> dekkong,  install the  w32codec packa ge from medibuntu repository
[15:01] <bakabon> INDONESIA
[15:01] <erUSUL> CrYsIsX: it is better to be helped on channel... but i do not have experience with wubi sorry
[15:01] <oCean_> !indonesia | bakabon
[15:01] <CrYsIsX> urUSUL: is there an other way to install it?
[15:02] <lastent> hi, I'm having problems with the audio on flash, I'm using 8.10
[15:02] <DavidVWallin> Where did ubuntu hide the binary of php when installed the LAMP -packages?!
[15:02] <KingWilliam> lastent, what kind of problems?
[15:02] <erUSUL> !install | CrYsIsX
[15:02] <DavidVWallin> there is no /usr/bin/php no /usr/local/bin/php no /usr/bin/php5 no /usr/local/bin/php5
[15:02] <DavidVWallin> no nothing
[15:02] <KenBW2> is there an easy way to write a bash script to take a folder with 20,000 files in it and move them into 20 folders with 1000 in each?
[15:02] <DavidVWallin> whereis, local or find cant locate it
[15:03] <wassy121> DavidVWallin: you have to install php-cgi or php-cli most times.
[15:03] <CrYsIsX> urUSUL: Thx
[15:03] <lastent> KingOfDos, there's no sound on the videos, like the youtube ones
[15:03] <wassy121> DavidVWallin: Normally mod_php5 only installs the apache module.
[15:03] <DavidVWallin> wassy121, aaaha
[15:03] <erUSUL> KenBW2: do not know if easy but doable
[15:03] <Subdolus> I have somehow managed to erase both my wifi0 and ath* interfaces while trying to patch madwifi... nor ifconfig or iwconfig can see any wireless intefaces but dmesg does see it
[15:04] <Subdolus> any ieads? :(
[15:04] <KingOfDos> highlight!
[15:04] <Subdolus> ideas*
[15:04] <KingOfDos> ;)
[15:04] <mysticdarkhack> anyone who own a laptop with a buit in webcam and mic, I like to know if they ever have the intergrated mic working in order to use skype?
[15:04] <mysticdarkhack> or ekiga
[15:04] <KenBW2> erUSUL: wouldnt you just loop 1000 times at a time?
[15:04] <erUSUL> KenBW2: ask in #bash very knowledgeable people there... maybe they come up with a onliner XD
[15:04] <KenBW2> erUSUL: good idea
[15:04] <wassy121> Subdolus: Does ifconfig -a show it unconfigured?  Check dmesg or /var/log/messages, there may be errors in there about setting up firmware or something.
[15:04] <erUSUL> oneliner*
[15:04] <KingWilliam> lastent, is any other multimedia app opn? (like totem, songbird, rhythmbox, ...)
[15:05] <Nikon> have a quick question.  trying to mount a cdrom in ubuntu server without succes
[15:05] <lastent> KingOfDos, yes I have rythmbox opened too
[15:05] <Nikon> mount /dev/cdrom returns me no medium found
[15:05] <oCean_> KenBW2: the files are randomly named?
[15:05] <KingOfDos> you've really got to learn howto tabcomplete :D
[15:06] <KenBW2> oCean_: it's a load of recovered deleted ones, so i think theyre numbered numerically - 13542536 for example
[15:06] <Subdolus> wassy121: like I just said, ifconfig doesn't show it at all, dmesg see's it with no errors
[15:06] <KingWilliam> lastent, I have the same problem. 2 media programs can for some reason not play at once...
[15:07] <KingWilliam> lastent, close firefox, close rhythmbox, start firefox again and it should work
[15:07] <wassy121> Subdolus: Then most probably it is seeing the physical device on the pci bus, but not assigning it a driver, and thus not instantiating the mii-interface.
[15:08] <oCean_> KenBW2: but it is'nt a logical sequence.. that would've made it easier, however this is 'scriptable' also.
[15:08] <josepcoves> Hi, i have problems with my webcam, it works under KDE apps but doesn't with Gnome. Could anyone help me please?
[15:08] <wassy121> Subdolus: means you may be using the wrong driver, or something.  Which wireless card?  Did you read the community docs about how to set it up?
[15:08] <KingWilliam> KingOfDos, I think lastent is talking to me but doesnt know he is adding the wrong name ;)
[15:08] <oCean_> KenBW2: but still, you're going to end up with various files in random directories?
[15:08] <Nikon> someone can help me with mounting my cdrom ?
[15:08] <KenBW2> oCean_: i think they are logical - just nautilus struggles to read all the files lol
[15:09] <lastent> KingWilliam, ha ha ha, sorry about the names
[15:09] <wassy121> Nikon: It should automount when you put it in (if you are running 8.10).  If the mount command says "no media" it means the cdrom is saying there is no readable media in the drive.
[15:09] <Subdolus> wassy121: yeah it's an atheros and worked fine before with standard madwifi-ng drivers; it's in an EEE
[15:09] <josepcoves> Please, could someone attend me?
[15:09] <Subdolus> (701)
[15:09] <lastent> KingWilliam, it didnt work
[15:09] <wassy121> Subdolus: atheros is now fully supported without madwifi or any other craziness.  It is just the 'ath' driver.
[15:10] <oCean_> KenBW2: well, something like this is worth a shot: "for FILE in dir/prefix{1..10}; do mv $FILE /path/to/newdir; done"
[15:10] <matteo_> hi all, trying to connect my tv to pc i turned of main screen from display configuration, now i can only acces with textual interface (the ctrl alt f1 one). Anyone knows how to solve this problem? thx alot is a bit URGENT
[15:11] <josepcoves> Hi, i have problems with my webcam, it works under KDE apps but doesn't with Gnome. Could anyone help me please?
[15:11] <Subdolus> wassy121: but it doesn't support injection, does it?
[15:11] <oCean_> KenBW2: where 1..10 is a loop and <prefix> has to reflect any prefix the file (name) might have
[15:11] <KingWilliam> lastent, Are you sure you closed firefox completely? (you might want to check with the system monitor) If this doesn't help I have no idea what is causing it,,,
[15:12] <wassy121> Subdolus: it supports "getting on the interwebs".  Good enough for me.
[15:12] <Subdolus> heh
[15:12] <gordonjcp> hello
[15:12] <gordonjcp> is there a sane way to remove all the superfluous fonts from an Ubuntu install?
[15:13] <gordonjcp> I can't see me ever needing things like arabic or sanskrit fonts
[15:13] <wam> wah - the dependencies of ubuntu-standard and ubuntu-minimal suck.
[15:13] <josepcoves> Is someone available for me?
[15:13] <matteo_> hi all, trying to connect my tv to pc i turned of main screen from display configuration, now i can only acces with textual interface (the ctrl alt f1 one). Anyone knows how to solve this problem? thx alot is a bit URGENT
[15:14] <oCean_> !cam | josepcoves
[15:14] <KingWilliam> matteo_, if I were you, I would just reconfigure Xorg, but that is probably a dirty solution
[15:15] <jb-rite> erUSUL: Do you know how to find which hard drive/partition to use for each grub entry? I'm currently trying to use (hd0,2) which would be my first hard drive and second partition as far as I know :o
[15:15] <Lou_> Is there a way set xchat to automatically join several channels at startup?\
[15:16] <lastent> KingWilliam,  ok ill check again
[15:16] <lstarnes> Lou_: separate the channel names with commas, e.g. #one,#two,#three
[15:16] <biohazard> hola
[15:16] <KingWilliam> Lou_, go to XChat > Network List > choose a server and hit edit
[15:16] <SnakeArt> Hello! I would like to use my STIR4200 usb dongle with lirc. Is there any hack to do it? There was no information about my dongle at lirc site.
[15:17] <Juaco> i want to try enlightenment 17 on ubuntu, anyone knows if there are E17 ppas or other repos??
[15:17] <KingWilliam> Lou_, You can add channels to join when connecting the server there
[15:17] <KingOfDos> KingWilliam: true, but then they have to press "tab" again to complete other names that start with the K (or how far they typed the name already)
[15:17] <KingOfDos> just like i said, it's a wrong tabcompletion. but i'm used to that from others, so no big problem ;)
[15:17] <lastent> KingWilliam, yes I closed it all and it is not working
[15:17] <matteo_> hi all, trying to connect my tv to pc i turned of main screen from display configuration, now i can only acces with textual interface (the ctrl alt f1 one). Anyone knows how to solve this problem? thx alot is a bit URGENT
[15:18] <KingWilliam> lastent, then I can not help you
[15:18] <Lou_> lstarnes and KingWilliam, many thanks!
[15:18] <KingWilliam> Juaco, enlightenment is in the repos i believe
[15:19] <Juaco> just the 16 version...not that it is bad but i heard so many wonderful stuff but 17b
[15:20] <SnakeArt> Anyone knows how to use stir4200 usb dongle with lirc?
[15:20] <shakxtra-> hola alguien que me pueda ayudar?
[15:20] <lonel> hey any one here got openvpn configured with ubuntu in bridge mode?
[15:20] <lonel> https://help.ubuntu.com/community/OpenVPN
[15:20] <KingWilliam> Juaco, as it is not in the repos i suggest you follow this guide: http://technofreakatchennai.wordpress.com/2006/11/19/e17-on-ubuntu-a-brief-enlightenment/
[15:21] <Juaco> KingWilliam: thanx!
[15:22] <Kartagis> when i invoke pflogsumm, i get all 0 results. any ideas why?
[15:22] <Juaco> shakxtra: este canal es en ingles y no permiten consultas en espaniol, esta disponible #ubuntu-es
[15:22] <Siert> is it possible to use dynamic dns without using dhcp client?
[15:22] <SnakeArt> How to use stir4200 usb dongle with lirc?
[15:22] <erUSUL> jb-rite: well windows does not like to be on any partition but the first one of the first disk... so it would be (hd0,0)
[15:22] <shakxtra> #ubuntu-es
[15:23] <Juaco> that's right
[15:23] <erUSUL> jb-rite: (hb0,2) -> first drive 3th partition
[15:23] <wassy121> 3th?
[15:23] <erUSUL> wassy121: grub counts from 0
[15:24] <wassy121> 3rd ;-)
[15:24] <Siert> ah, nsupdate :) ... cu
[15:24] <matteo_> hi all, trying to connect my tv to pc i turned of main screen from display configuration, now i can only acces with textual interface (the ctrl alt f1 one). Anyone knows how to solve this problem? thx alot is a bit URGENT
[15:24] <smo_PenguinStyle> Hey there.  Does anyone know how to map windows key (super L) + E to open file explorer in ubuntu 8.10?
[15:24] <jb-rite> So, windows will always allocate hb0,0 for itself?
[15:24] <erUSUL> wassy121: oops... not native english speaker ... ;P
[15:24] <easwar> smo_PenguinStyle, gconf-editor
[15:25] <SnakeArt> Is there any hack to use stir4200 usb dongle with lirc?
[15:25] <smo_PenguinStyle> Easwar:  is there a tutorial/howto?  what edits do I need to make?
[15:25] <easwar> smo_PenguinStyle, >>apps>>metacity
[15:26] <smo_PenguinStyle> ??metacity
[15:26] <easwar> smo_PenguinStyle, >>keybinding_commands
[15:26] <wassy121> SnakeArt: I think you may be barking up the wrong tree here.  If the IR usb-module is loaded, then the rest is all lirc magic.  That is a program that most people don't use on a daily basis, but if you check for lirc-specific channels, they would be able to help.
[15:26] <DarkKnight> hey can anyone help me with this...when i restarted apache i got this message http://paste.ubuntu.com/107339/
[15:27] <easwar> smo_PenguinStyle, just follow the directions,easier that way
[15:27] <ugliefrog> can someone tell me how to change dir in the terminal... i must be doing something very wrong. i type in cd /(name of dir) and it says dont exist
[15:27] <wassy121> DarkKnight: that means that you don't have 'ServerName' specified in your httpd.conf, and it can't resolve your primary IP from /etc/hosts.
[15:27] <smo_PenguinStyle> easwar:  so, do I simply go to the keyboard shortcuts section in preferences?  I've already tried that, and it seems that the gnome keyboard shortcuts don't support windows key (super L) + someletter combinations.
[15:27] <easwar> ugliefrog, you need the entire path
[15:27] <wassy121> DarkKnight: fix one or the other, and it should go away.  Just a warning anyway, things should still work.
[15:27] <easwar> smo_PenguinStyle, run gconf-editor in Alt+F2
[15:28] <DarkKnight> wassy121; so how do i specify the server name
[15:28] <Lenox> :ugliefrog - just tipe in cd "directory" without "
[15:28] <ugliefrog> i do type in pwd it shows me dir then i try to go there
[15:28] <smo_PenguinStyle> easwar:  alt+f2 == cli / console?
[15:28] <easwar> smo_PenguinStyle, key combination in GUI
[15:28] <bebraw> does anyone know how to install .jars do that they appear to java namespace properly (ie. org.apache.something.something)?
[15:29] <sieken> i am fairly new to ubuntu and linux in general, so i was wondering if i could get some help with a question i have.
[15:29] <oCean_> ugliefrog: than use "cd dirname"
[15:29] <bebraw> *so that
[15:29] <wassy121> sieken: don't ask to ask.  Just ask.
[15:29] <KingWilliam> sieken, of course you can. Just fire away
[15:29] <Kartagis> does "delivered" mean "sent out" on pflogsumm reports?
[15:29] <ugliefrog> ok ill try again
[15:30] <sieken> i did some changes a while ago and now that i have rebooted, some settings are back to the way they were before
[15:30] <DarkKnight> wassy121; so how do i specify the server name
[15:30] <ugliefrog> ugliefrog@FrogHQ:~$ pwd
[15:30] <ugliefrog> /home/ugliefrog
[15:30] <ugliefrog> ugliefrog@FrogHQ:~$ ls
[15:30] <ugliefrog> CD1  Custom Icons and Graphics  ISO Programs  Pictures    ugliefrog
[15:30] <ugliefrog> CD2  Desktop                    mozilla2.ps   Public      Videos
[15:30] <FloodBot2> ugliefrog: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[15:30] <ugliefrog> CD3  Documents                  Music         scrollback  winetricks
[15:30] <wassy121> DarkKnight: You edit your httpd configuration, and set it.
[15:30] <easwar> smo_PenguinStyle, what happened?
[15:31] <ugliefrog> sorry i didnt know bout the flod thing
[15:31] <DarkKnight> wassy121; i dont know where exactly the httpd is located...can you specify the command
[15:31] <wassy121> DarkKnight: Maybe apache isn't right for you.  If you don't know how to set it up, you could be opening up more problems.
[15:32] <jb-rite> Would my windows XP partition need a bootable flag to be used by grub?
[15:32] <KingWilliam> sieken, what kind of settings?
[15:32] <smo_PenguinStyle> easwar:  just making sure that I don't screw things up, and its taking another moment.   brb.
[15:32] <oCean_> ugliefrog: you can use paste.ubuntu.com to paste any output. Share the url here.
[15:32] <KenBW2> jb-rite: not afaik
[15:32] <KingWilliam> sieken, do you use the liveCD or do you have ubuntu installed?
[15:32] <wassy121> jb-rite: nope, it should work with grub chain-loading over to it.
[15:32] <jb-rite> hrmm, this has me stumped
[15:32] <DarkKnight> wassy121; i have to work with php and also drupal...i am in learning stages...
[15:33] <smo_PenguinStyle> easwar:  Where do I go in gconf editor
[15:33] <easwar> smo_PenguinStyle, press Alt+F2 on your desktop,type gconf-editor and press Enter,in the window that opens,follow />>apps>>metacity>>keybinding_commands>>edit command 1 to read nautilus
[15:33] <erUSUL> jb-rite: my connection failed... did you pasted the ouput i requesed ?
[15:33] <smo_PenguinStyle> easwar:  now I understand.  I'm sorry that the coffee hasn't kicked in yet.  :)
[15:33] <sieken> i have installed, just yesterday actually. i took away the beep sound that you get from time to time, some effects in compiz
[15:33] <easwar> smo_PenguinStyle, lol,nevermind
[15:33] <jb-rite> erUSUL: I didn't, I must have missed the message.
[15:34] <sieken> so i was wondering if there was a way that i don't know of to make it permanent
[15:34] <KingWilliam> It is always permanent.
[15:34] <erUSUL> jb-rite: paste the output of "sudo fdisk -l" on a pastebin
[15:34] <MOUD> Hey all
[15:34] <wassy121> sieken: maybe you fixed the beep sound by unloading the pcspkr module, and now upon reboot it came back?
[15:35] <smo_PenguinStyle> easwar:  is it possible to create new commands for combinations like super L / windows key + R for run, and super L / windows key + E for opening nautilus?
[15:35] <sieken> i think that's just what i did.
[15:35] <easwar> smo_PenguinStyle, only new key combinations
[15:35] <sieken> can i do it in another way?
[15:35] <erUSUL> smo_PenguinStyle: System>Preferences>
[15:35] <easwar> smo_PenguinStyle, have you finished editing command 1 to read nautilus?
[15:35] <wassy121> sieken: if so, you can edit /etc/modprobe.d/blacklist and add a line for the pc speaker.
[15:36] <easwar> erUSUL, smo_PenguinStyle has already tried that
[15:36] <wassy121> mine is like: "blacklist snd_pcsp" , but I think it was called pcspkr in 8.04
[15:36] <macman> anyone watching the inaguration ?
[15:36] <MOUD> what's a good flash player for ubuntu?
[15:36] <Yud_Zroc> are there driver listings to be able to use my mic port
[15:36] <smo_PenguinStyle> easwar:  does "new key combinations" equate to the ability to create superL+R, etc?
[15:36] <jb-rite> http://pastebin.com/m5b1d9591
[15:36] <easwar> smo_PenguinStyle, yes
[15:36] <wassy121> MOUD: flashplugin-nonfree is best I think.
[15:36] <Yud_Zroc> MOUD use the package manager and get the flash libraries
[15:36] <smo_PenguinStyle> easwar:  alrighty, let me try this.... momentito....
[15:37] <MOUD> should I install macromedia flash then?
[15:37] <Yud_Zroc> MOUD: no
[15:37] <wassy121> MOUD: don't install their tarball crap.
[15:37] <MOUD> ok then
[15:37] <Yud_Zroc> MOUD: use the add/remove programs
[15:37] <wassy121> MOUD: use the package manager to install ubuntu's version.  It is better packaged, and handles upgrades more smoothly.
[15:37] <Yud_Zroc> MOUD: or if ur comfy with it use the package manager
[15:37] <sieken> do i do that in terminal or? i'm not sure how to operate things atm
[15:38] <MOUD> I'll use the package manager
[15:38] <Lupine> Can an Ubuntu 8.10/iptables guru take a look at this issue for me: http://ubuntuforums.org/showthread.php?t=1044885
[15:38] <MOUD> ops
[15:38] <erUSUL> jb-rite: the windows partition is (hd0,1) in grub
[15:38] <MOUD> the add/remove because flash is not not shown in the package manager
[15:39] <wassy121> sieken: 'sudo nano /etc/modprobe.d/blacklist' from the console, or if you have an "edit file as root" link in your applications, you can use that.
[15:39] <jb-rite> erUSUL: alrighty -- I'll give it another shot, thanks a lot for helping.
[15:39] <Yud_Zroc> Lupine: i had that problem once...
[15:40] <Lupine> MOUD, make sure "All available applications" is being shown
[15:40] <Yud_Zroc> Lupine: i had to use a different connection once...
[15:40] <CrYsIsX> Hello, I went to the installation screen , i pressed install, waited about 2 mins booting... then started getting: end_request I/O error, dev Sr1, sector 9180272 & under that [127 (it kept going 136 etc...), 824337] buffer I/O errir on devide Sr1, logical Block 2721147535
[15:40] <Yud_Zroc> CrYsIsX: u could have a bad cd
[15:40] <Yud_Zroc> CrYsIsX: do a cd check
[15:40] <Lenox> I have just one question, everytime I run firefox to watch youtube videos firefox crash - I have Ubuntu 8.10 and the newest firefox and flash
[15:40] <CrYsIsX> probably
[15:40] <wassy121> CrYsIsX: that means "the cdrom can't read the CD".  Due to bad laser, bad disk, scratches, etc.
[15:40] <MOUD> yes it is.
[15:40] <jb-rite> it worked! -- thanks again erUSUL.
[15:40] <erUSUL> jb-rite: no problem
[15:40] <DarkKnight> wassy121; any idea??
[15:41] <CrYsIsX> ok thanks, ill get a new CD, it was a DvD RW
[15:41] <Lupine> Yud_Zroc, what do you mean by a different connection?
[15:41] <Lupine> or if it's too busy, and you just want to respond to that post...I'm fine with that too. thx!
[15:42]  * easwar is out
[15:42] <Yud_Zroc> Lupine: try letting ubuntu connect to it itself...or if ur like me and running 6 servers (dont ask) u have a lot of nics (ethernet cards)
[15:42] <rrohde> Lenox, I have the same issue. But not all the time. Strange. It doesn't crash, but freezes.
[15:42] <MOUD> Macromedia Flash plugin or flashblock extension for firefox?
[15:42] <Lenox> yes it freeze
[15:42] <Yud_Zroc> MOUD: i would get both
[15:42] <sieken> doesn't seem to work. or maybe i've done it wrong. i went into the system files and found my way to the blacklist. should write something there?
[15:42] <MOUD> Yud_Zroc: ok then :)
[15:42] <Yud_Zroc> MOUD: oh wait....not the flash block
[15:43] <Yud_Zroc> MOUD: i thought it was something else
[15:43] <MOUD> oh ok
[15:43] <Yud_Zroc> flash block has something to do with blocking unwanted flash adds or somethinglike that
[15:43] <MOUD> thanks Yud_Zroc , wassy121, and Lupine for the help :)
[15:43] <MOUD> ah, ok then
[15:43] <Yud_Zroc> np MOUD
[15:44] <Lupine> MOUD, np
[15:44] <Lenox> MOUD: i installed with synaptic the adobe-flashpluginn and the flashplugin-nonfree
[15:44] <Yud_Zroc> i had it blocking something i wanteed to see before
[15:44] <wassy121> sieken: yes, once you add that line like 'blacklist snd_pcsp' to the end/middle/beginning/whatever, it will "stick" upon reboot.
[15:44] <bo7amny> #linuxac
[15:44] <wassy121> sieken: Then just 'sudo modprobe -r snd_pcsp' and it will be active for this boot.
[15:44] <Yud_Zroc> also for those getting flash-nonfree....look up JRE in the package manager
[15:44] <bo7amny> sorry
[15:44] <Yud_Zroc> get 6
[15:45] <sieken> allright, thanks
[15:45] <Yud_Zroc> anyone good with drivers and getting teamspeak to work?
[15:46] <wassy121> teamspeak, lol 2006 ;-)
[15:46] <Yud_Zroc> ya i am having trouble with it on linux....well the cliant part
[15:46] <Yud_Zroc> no voice
[15:46] <Yud_Zroc> but i can hear
[15:47] <guestguestnew> what do you guys think are the best cities to work in IT?
[15:47] <Yud_Zroc> guestguestnew: depends
[15:47] <guestguestnew> Yud_Zroc: on what?
[15:48] <Yud_Zroc> guestguestnew: what your specializations are
[15:48] <kitche> !offtopic | guestguestnew
[15:48] <lieuwe> can anyone help me, i'm kinda new to ubuntu, getting wierd errors
[15:48] <troynt> If I install something from source, will aptitude detect that?
[15:48] <guestguestnew> Yud_Zroc: programming c++
[15:48] <troynt> e.g. i want to do future upgrades..
[15:48] <wassy121> troynt: no.
[15:48] <kitche> troynt: no
[15:48] <troynt> ;(
[15:48] <Yud_Zroc> lieuwe: what are your errors
[15:49] <wassy121> troynt: Which is why installing .debs is so much easier in the long run.  It avoids conflicts, allows for upgrades, and is just plain better.
[15:49] <lieuwe> yud_zrock->when i boot the livecd it geives me a 'buffer error on device sr0'
[15:49] <Yud_Zroc> lieuwe: when u type my name partially hit tab for auto complete
[15:49] <Yud_Zroc> ]hm
[15:50] <troynt> wassy121: can you install debs w/ ubuntu?
[15:50] <vinod> Hello everyone. Would like some help with setting the framebuffer console font to console-terminus. I have SCREEN_FONT=Uni3-Terminus16.psf.gz set in /etc/console-tools/config. But that doesn't seem to do it.
[15:50] <lieuwe> Yud_Zroc->thnx
[15:51] <matteo_> anyone knows how to connect my 37 inch fulkl hd tv with vga to ubuntu? I cant gent any signal
[15:51] <lieuwe> Yud_Zroc->when i boot into ubuntu it generates like a milion off thos errors, and then directs me to a busybox prompt
[15:51] <Bomber87> hello all
[15:51] <Yud_Zroc> lieuwe: did u just install it
[15:52] <lieuwe> Yud_Zroc->no, i'm trying to boot the livecd, just to try it
[15:52] <Yud_Zroc> bad cd
[15:52] <Yud_Zroc> make a new one lieuwe
[15:52] <lieuwe> Yud_Zroc->i have an official cd, ordered a free cd from the site
[15:52] <oCean_> lieuwe: see here https://answers.launchpad.net/ubuntu/+question/53711 for several tips on that error
[15:52] <Yud_Zroc> lieuwe: do u have high speed internet
[15:52] <lieuwe> oCean_->looking now
[15:53] <Yud_Zroc> http://ubuntuforums.org/showthread.php?t=999549&highlight=buffer+error+on+device+sr0
[15:53] <cousteau> why does /bin/sh->dash instead of bash?
[15:53] <kitche> cousteau: because ubuntu decided to symlink sh to dash
[15:53] <matteo_> anyone knows how to connect my 37 inch fulkl hd tv with vga to ubuntu? I cant gent any signal
[15:53] <kitche> cousteau: easy to fix dpkg-reconfigure sh
[15:53] <cousteau> why? bash seems to be easier to use
[15:53] <Yud_Zroc> matteo_: i am using a vga cable
[15:54] <DarkKnight> can anyone solve this problem i have pasted it here http://paste.ubuntu.com/107346/
[15:54] <kitche> cousteau: because sh in ubuntu eyes should not be used as a login shell
[15:54] <Pici> !dash | cousteau
[15:54] <kitche> cousteau: also has something to do with POSIX
[15:54] <oCean_> DarkKnight: the mysql thing?
[15:55] <cousteau> ok
[15:55] <DarkKnight> oCean_ yeas
[15:55] <lieuwe> Yud_Zroc->im going to try setting all_generic_ide=1, thanks for the help...
[15:56] <cousteau> I'm noticing lots of commands that beahve differently on bash and dash
[15:56] <MOUD> restarting firefox
[15:56] <oCean_> DarkKnight: you have to setup a password for the 'root' user. And use the "-p" option in mysqladmin. Readup on how to use mysql
[15:56] <DarkKnight> oCean; i am following this http://2bits.com/articles/installing-a-dedicated-server-or-a-vps-with-ubuntu-server-804-lts-hardy-heron-drupal-6x.html
[15:57] <bliffle> ping
[15:57] <cousteau> e.g: echo "Hello\n"
[15:57] <DarkKnight> oCean_; i am following this http://2bits.com/articles/installing-a-dedicated-server-or-a-vps-with-ubuntu-server-804-lts-hardy-heron-drupal-6x.html
[15:57] <Jynks> hi guys back... just rebooted to get the exact erro text on the boot for you to look at if you have time
[15:57] <Jynks> http://rafb.net/p/xgcUKM83.html
[15:58] <Jynks> How do i get the password for the default keyring to enter automaticaly?
[15:58] <Jynks> or give network manager the ability to acess the default keyring?
[15:58] <Jynks> mt
[15:58] <cellofellow> use the login keyring
[15:58] <oCean_> DarkKnight: just saying it might be easier when you know the mysql (account) basics first. The question seems not ubuntu related anyway. This URL might be a good start: http://dev.mysql.com/doc/refman/5.1/en/default-privileges.html
[15:58] <Jynks> cellofellow: how do i do that?
[15:59] <DarkKnight> oCean_; thanq i m checking it
[15:59] <DarkKnight> oCean_; and what about the apache thing that i had pasted
[16:00] <dbuiviet> hi all, can you guys show me where I can find tutorial for creating ubuntu package from source (.tar ball)? Thanks in advance :)
[16:00] <oCean_> DarkKnight: well, that's because apache cannot determine (as it says) what the fqdn of your machine is. So it uses the loopback ip address. Your servername can be specified in apache configuration, but it should also be resolvable (e.g. by editing /etc/hosts)
[16:01] <ox> has feisty been removed from all the repositories?
[16:02] <DarkKnight> oCean_ yes i see the server address right...still what could be the probelm
[16:02] <dbuiviet>  hi all, can you guys show me where I can find tutorial for creating ubuntu package from source (.tar ball)? Thanks in advance
[16:02] <oCean_> DarkKnight: see the 2nd part of what i said. It's the config (apache and/or hosts)
[16:03] <cousteau> [ `read -p "Run program? (y/n) " r; echo $r` = "y" ] && ./program → this works on bash but not on dash
[16:03] <DarkKnight> oCean_;i edited that file...the address is specified
[16:03] <ox> guess
[16:03] <ox> so
[16:04] <MOUD> Flash worked :)
[16:04] <MOUD> thanks
[16:04] <MOUD> I have another problem
[16:04] <DarkKnight> oCean_;in the file...the hosts addresses are specified which i have seen from the network manager
[16:04] <Pici> !newpackage | dbuiviet
[16:05] <yakuz> can someone recomand a good backup application for ubuntu?
[16:05] <oCean_> DarkKnight: well, it might be a little more complex than that. For example you also might have to specify the ServerName in apache config.
[16:05] <oCean_> !backup | yakuz
[16:05] <DarkKnight> oCean; ahh...if you dont mind can you be more specific on how to do it...i am still a learner
[16:06] <MOUD> I just downloaded and installed java 6 =>    sudo apt-get install sun-java6-jdk  ;  On terminal, javac and java commands seems to work fine but it's not working on firefox, it says "It seems like Java is not installed on your computer", any ideas?
[16:06] <dbuiviet> hello, no one can help me with packaging .deb files from source code?
[16:06] <yakuz> oCean_: thanks!
[16:06] <dbuiviet> :-(
[16:06] <Alastair_> please help me, i don't have any other place to ask anymore...
[16:06] <Alastair_> how can i recover deleted data from a drive
[16:07] <MOUD> Alastair_: In ubuntu I don't know but on Windows there's a program called Active Undelete and it seems very good
[16:07] <Alastair_> it's a linux partition unfortunately...
[16:07] <cousteau> Alastair_: it depends on the partition format
[16:07] <MOUD> I see
[16:08] <MOUD> !recovery
[16:08] <Alastair_> ext4(3)
[16:08] <Alastair_> photorec is working, but the output is a mess
[16:08] <MOUD> !data_recovery
[16:08] <Gordin> I have made a custom dvorak layout and it seems to get loaded properly (the buttons are correct when I click at "show current layout") but when i write it behaves like the standard us dvorak. though at the login promt the custom keys work. can somebody tell me why?
[16:08] <linux_guy> what do i need to do in ubuntu so i can print via bluetooth?
[16:08] <karakzho> hi all
[16:08] <Alastair_> i need something which will recover them orderly
[16:08] <MOUD> hello
[16:09] <oCean_> Alastair_: search google for "foremost"
[16:09] <MOUD> I don't know, sorry.
[16:09] <oCean_> Alastair_: see https://help.ubuntu.com/community/DataRecovery
[16:09] <Alastair_> thanks,  i'll look into it now
[16:09] <cattlesnake> Hello everybody.  I've spend nearly a day trying to get Ubuntu working with my Marvell Topdog wireless to no avail.  I'd hate to revert back to Vista so quickly, but it's looking like there's no choice unless anyone knows what to do.  There are no tutorials online that seem to work.
[16:09] <troynt> anyone have any good setup scripts to install apache2+php5+mysql etc
[16:09] <Pici> !lamp | troynt
[16:09] <zimbres> Is there any Ubuntu software I could use to see images in the .fits format? I did not find anything using apt-cache search fits
[16:09] <Alastair_> oCean_,  that's where i found photorec, the other ones aren't working for me :(
[16:10] <troynt> Pici: thx
[16:11] <MOUD> I just downloaded and installed java 6 =>    sudo apt-get install sun-java6-jdk  ;  On terminal, javac and java commands seems to work fine but it's not working on firefox, it says "It seems like Java is not installed on your computer", any ideas?
[16:11] <Alastair_> install the plugin
[16:11] <tawt> can anyone help me update my /boot/grub/menu.lst ? i have the kernel 2.6.27-9 in my /boot folder, but when i do "uname -r" in the terminal i get "2.6.24-22-generic" from 8.04 before i upgraded to 8.10
[16:11] <Alastair_> sun-java6-plugin
[16:11] <oCean_> cattlesnake: you've been here: https://help.ubuntu.com/community/WifiDocs ?
[16:11] <Yud_Zroc> MOUD: i used package manager
[16:12] <cattlesnake> Yes.  I have ndiswrappered the hell out of my computer.
[16:12] <CyL> Why does ubuntu smetimes uses gnome front end for configuration tasks, and other times it uses fedora front ends?
[16:12] <Yud_Zroc> anyonw know what version of ubuntu is best for a eeepc
[16:12] <kkakka1221> hi there - I've got an xrandr resolution issue - anyone help?
[16:13] <Yud_Zroc> kkakka1221: more info plz
[16:13] <oCean_> !eeepc | Yud_Zroc
[16:13] <kkakka1221> how does xrandr find it's defaults?
[16:13] <tr3nd> can someone help install graphic drivers for nVidia 8600 GT for my Ubuntu 8.10
[16:14] <MOUD> Yud_Zroc: I'll check
[16:14] <chrismnh> my installation of wine won't recognize files that the .exe needs to run, anyone know hoe to fix this?
[16:14] <chrismnh> how*
[16:14] <Yud_Zroc> tr3nd: yes i can
[16:14] <shubbar> how can i check and fix an SD card errors?
[16:14] <CyL> Why does ubuntu sometimes uses gnome front end for configuration tasks, and other times it uses fedora front ends?
[16:15] <kitche> CyL: you mean why ubuntu just uses gnome front ends? since you know Red Hat is the main company behind GNOME
[16:15] <tr3nd> Yud_Zroc, ok how?
[16:15] <stufkan> anyone knows about the pure-ftpd virtual user system?
[16:15] <cousteau> how do I compare two strings using dash?
[16:16] <kkakka1221> is there a specific place I should ask for help with xorg / gdm / xrandr issues?
[16:17] <beachsurfin> how to change the default application for a file type?
[16:17] <CyL> kitche: well, in fact I dind't know that... I mean sometimes ubuntu uses *-admin tools, wich are part o gnme distributions, and other times it uses system-config-* tools. wich were made by red hat for fedora... why not use the gnome counter parts?
[16:18] <linuxman410> when i setup ubuntu i did not set up to ato login can i change that now
[16:18] <famio> linuxman410: system menu -> login screen
[16:18] <beachsurfin> nm
[16:19] <kitche> CyL: no clue besides the ease of use
[16:20] <Pici> !traffic
[16:20] <Fawzib> hello, I'm trying to install ubuntu on a Gigabyte GA-6KIEH-RH, when it's booting I get the gollowing message "IRQ 23: nobody cares use irqpoll, usb_hcd_irq",but the installation continues. I can complete the install but then it will fail when booting and show me the "(initramfs)" prompt.
[16:22] <adac> Is it possible to install ubuntu over vnc?
[16:22] <DarkKnight> oCean; i have read the manual....it says we have to supply the localhost...can you tellme what the localhost address will be
[16:23] <dougiel> I am running 8.04 and when I "sudo /etc/init.d/lirc restart" I get  * Unable to load LIRC kernel modules. Verify your * selected kernel modules in /etc/lirc/hardware.conf - any suggestions?
[16:23] <cattlesnake> Anyone know if Kubuntu is friendlier with Marvell drivers?  This is ridiculous.  It's beginning to feel a futile endeavor.
[16:23] <Yud_Zroc> cattlesnake: same os
[16:23] <different> hi
[16:23] <horstle> huhu
[16:24] <ericvw> I am getting a GPG error for ppa.launchpad.net
[16:24] <xocket> heya. would you know how to make my left alt key behave as my right one? having a sandwich here so excuse me for typing slow..
[16:24] <different> can anyone tell me how to register irc chat
[16:24] <cattlesnake> Well then, it looks like neither buntu will work with my laptop.
[16:24] <Pici> !register | different
[16:24] <linuxman410> cool i shaved boot time by 20 secs by disable bluetooth and auto login
[16:25] <different> !register different
[16:25] <Pici> different: Please see the message from ubottu above
[16:25] <Honksu> Hi! I just installed 8.10 to my laptop and booted into new system. After giving my login information all I get is light brown background with cursor. I can't get to text console by pressing ctrl+alt+F1-6. Nothing else works either exept mouse with thouchpad and usb mouse. Something goes wrong and gnome stops + keyboard locks up. Any ideas what to do?
[16:27] <top_> ПриВет ВсЕМ!!!
[16:27] <LjL> !ru | top_
[16:27] <MilkFloat> Honksu: boot into recovery mode
[16:27] <dinesh372> thanks now i am registered
[16:27] <LjL> !default | beachsurfin
[16:27] <Honksu> MilkFloat: And do what?
[16:27] <zippert> någon som vet varför det krånglar med att göra om storleken på ntfs partioner under installaton?
[16:27] <dinesh372> can anyone tell me how to play songs using terminal
[16:28] <MilkFloat> Check if your KB works there first ;-)
[16:28] <Honksu> If I don't login and press ctrl+alt+F2 it works.
[16:28] <zippert> sorry wrong chatt
[16:28] <dinesh372> how to play songs using terminal
[16:28] <Honksu> MilkFloat: If I don't login and press ctrl+alt+F2 it works.
[16:28] <monokrome> dinesh372: Look into xmms2
[16:29] <LjL> dinesh372: one of play or aplay or alsaplay should work.
[16:29] <dinesh372> monokrome: i am not able to understand
[16:29] <tigreton> hi
[16:29] <anTiX> can I echo some characters to an usb-port just like I would to a com-port? what would the device be? I want to test a printer..
[16:30] <oCean_> dinesh372: maybe mpg123 suits your needs
[16:30] <grayson> Hi all, which folder in root would I find my packages with games etc, I want to back them up and aptoncd is refusing to work.
[16:30] <dinesh372> i tried to listen to audio song stored on my laptop but unable to do so please tell me how to do so using terminal only
[16:31] <oCean_> dinesh372: your sound is working?
[16:32] <Honksu> MilkFloat: The problem seems to be with the screen resolution because in text mode all the text seems not to fit on the screen and font is huge.
[16:32] <simplexio> dinesh372: mpg123
[16:32] <dinesh372> oCean : yes i can play without terminal but i want to know how to do it using terminal
[16:32] <oCean_> dinesh372: install mpg123: "sudo apt-get install mpg123"
[16:33] <monokrome> or like I said, install xmms2
[16:33] <Roland-> hello I need a newer version of transmission, is there a beta or something? my client version is banned in my local torrent provider
[16:34] <caboosification> is it possible to install ubuntu on a usb HD ?
[16:34] <cattlesnake> Alright, screw this.  Back to Vista and all it's bloatware.
[16:34] <Yud_Zroc> caboosification: yes
[16:34] <cattlesnake> It may not work well but it at least works.
[16:34] <caboosification> do i need to take any specific steps or just do a reglar install ?
[16:34] <Yud_Zroc> cattlesnake: i pray for u
[16:34] <adexa> :)
[16:35] <Yud_Zroc> cattlesnake: i have an idea
[16:35] <dinesh372> oCean: i can play song with other player also but i want to know how to play songs using terminal
[16:35] <MOUD> still not working even after restarting firefox
[16:35] <bliffle> ping
[16:35] <caboosification> Yud_Zroc: do i need to take any specific steps or just do a reglar install onto a usb partition ?
[16:35] <Yud_Zroc> cattlesnake: ur ur feeling crazy look at arch
[16:35] <Yud_Zroc> caboosification: one sec
[16:35] <cattlesnake> Yud-Zroc -- What is arch?
[16:35] <oCean_> dinesh372: like i said... (twice) install mpg123
[16:35] <doglino> I have downloaded file format .pe
[16:35] <doglino> .ape
[16:35] <tigreton> how i restore my system to the first day? like windows ;)
[16:35] <cousteau> I'm writing a makefile, but I can't make this work: @[ "`read -p 'Run program? (y/n) ' r; echo $r`" = y ] && ./program
[16:36] <doglino> and How i Do to hear?
[16:36] <MOUD> strangely, java is not listed in the about:plugins on firefox
[16:36] <cdavis> can someone tell me how to rename a lot of directories that contain colons and replace with underscores?
[16:36] <cousteau> cdavis: using rename
[16:36] <Yud_Zroc> caboosification: https://help.ubuntu.com/community/BootFromUSB
[16:36] <Dr_willis> cdavis,  or a bash script
[16:36] <cattlesnake> Yud-Zroc -- this has taken basically a full day's labor, just to get Ubuntu to detect my wireless internet.  I got Ubuntu to reduce headaches, I don't know if I'm seeing it...
[16:36] <[[thufir]]> when firefox opens another window and plays a flash video, how do you download it?  I installed a flash downloader add-on
[16:36] <Yud_Zroc> cattlesnake: it is a flavor opf linux that is made more customizable...but a lil harder to use
[16:37] <farf> ok, im having trouble installing nvidia drivers, i downloaded nvidia-glx-177_177.80 and tried to install it, first time it gave me an error with the architecture (amd64, which is the processor i have), so i tried to download the i386 one, this time it says Dependency is not satisfiable: nvidia-177-kernel-source
[16:37] <Dr_willis> cdavis,  get       sudo apt-get install renameutils     and use  the 'qmv' command.
[16:37] <MOUD> [[thufir]]: try using video download helper addon for firefox
[16:37] <[[thufir]]> MOUD: thanks
[16:37] <MOUD> [[thufir]]: you're welcome
[16:38] <cousteau> cdavis: I think it's something like: rename "s/:/_/g"
[16:38] <[[thufir]]> MOUD: the site is flashvideotheater.com btw,
[16:38] <dinesh372> oCean: i installed it but i know how to play mp3 songs using terminal
[16:38] <Dr_willis> cdavis,  watch out for files with spaces in the names also.. that can mess things up
[16:38] <MOUD> [[thufir]]: I'll give a try
[16:38] <dinesh372> oCean:correct question is i installed it but i want to know how to play mp3 songs using terminal
[16:38] <oCean_> dinesh372: type mpg123 surfin_usa.mp3
[16:38] <caboosification> Yud_Zroc
[16:39] <caboosification> whoops
[16:39] <MOUD> [[thufir]]: the website says:  Access Denied O.o
[16:39] <Seito> hi! could someone give assistance on building and installing new kernel to intrepid?
[16:40] <samuel> is there a commandline symbol map?
[16:40] <[[thufir]]> MOUD: meaning you couldn't go there, or that the downloader didn't work?
[16:40] <MOUD> [[thufir]]: meaning that I can't access the website
[16:40] <poseidon> Where is sources.list located again?  /etc/*/sources.list
[16:40] <[[thufir]]> MOUD: ah.  well, I installed that add-on, so we'll see
[16:41] <MOUD> [[thufir]]: ok, good luck
[16:41] <farf> ok, im having trouble installing nvidia drivers, i downloaded nvidia-glx-177_177.80 and tried to install it, first time it gave me an error with the architecture (amd64, which is the processor i have), so i tried to download the i386 one, this time it says Dependency is not satisfiable: nvidia-177-kernel-source
[16:41] <cdavis> if I do -p and --parents with cp it does changes the file date to today instead of preserving it, am I doing something wrong
[16:41] <poseidon> ubottu sources.list
[16:42] <MOUD> [[thufir]]: btw, use the small arrow of the addon
[16:42] <samuel> I'm having some problems with my character set on my commandline; the lowercase a with a circumflex shows up in lots of places, and I don't know what symbol it is supposed to mean
[16:42] <grayson> caboosification, http://klik.atekon.de/liveusb/#download   https://help.ubuntu.com/community/Installation/FromUSBStick
[16:42] <dinesh372> i am new to linux can anyone tell me how to learn linux i want to start as a normal ser then want to become developer
[16:42] <samuel> for instance, the borders when I run aptitude are composed of a+circumflex
[16:42] <doglino> dinesh372 :D
[16:42] <dinesh372> sorry ser is actually user
[16:43] <dinesh372> doglino: please answer my question
[16:43] <samuel> also, the select command for screen is C-a a-with-circumflex
[16:43] <[[thufir]]> MOUD: it works, muchos gracias.  I had to create an account first, btw.
[16:44] <samuel> anyone know why?
[16:44] <dhalsimm> hi all, I get a sound problem. when music is playing I can't get sound from other applications. is it from alsa settings or what??
[16:44] <[[thufir]]> MOUD: or, should I say, it's downloading a file which is increasing in size :)
[16:44] <samuel> or if there is a better place to ask this question?
[16:44] <doglino> dinesh372 I'm just a new user too :D
[16:44] <doglino> dhalsimm in sound change all to ALSA
[16:44] <dinesh372> i am new to linux can anyone tell me how to learn linux i want to start as a normal user then want to become developer
[16:44] <linuxman410> dinesh372 just get u a ubuntu cd and a computer to install in on and go for it
[16:45] <Mood> dinesh372: can't you just google it? :)
[16:45] <dhalsimm> doglino: from the application?
[16:45] <tor_> Hi guys. I got this weird problem, ubuntu can't detect my monitorr.
[16:45] <doglino> System-> preferences-> sound
[16:45] <MOUD> [[thufir]]: denada. Maybe the website doesn't support resume so the file size is increasing when downloading because firefox doesn't know the actual size of the file. Try using on youtube and see the difference
[16:45] <doglino> ;)
[16:45] <linuxman410> tor what monitor model
[16:45] <dinesh372> linuxman410: i am already working on ubuntu but donot know which book or material to follow
[16:45] <tor_> SyncMaster 172
[16:46] <samuel> has anyone here seen the a-with-circumflex on there commandline, replacing some other letter?
[16:46] <tor_> linuxman410, SyncMaster 172T
[16:46] <doglino> dhalsimm System-> preferences-> sound
[16:46] <dinesh372> Mood:i surfed a lot on net but the number of material is so vast i am confused which to follow
[16:47] <oCean_> dinesh372: start https://help.ubuntu.com/8.10/index.html
[16:47] <linuxman410> dinesh372 i just read everything on ubuntu i have been using linux only for past ten years and i just read everything i could find on it to learn
[16:47] <Mood> dinesh372: people will help those who help themselves :) perhaps focusing on a single question would be helpful
[16:47] <doglino> dinesh372 are you user of windows?
[16:48] <dinesh372>  doglino: yes
[16:48] <Yud_Zroc> doglino: that word is taboo
[16:48] <kherbouche> hi folks! :)
[16:48] <doglino> what is taboo/
[16:48] <doglino> ??
[16:48] <samuel> hi kherbouche
[16:48] <Yud_Zroc> its a badword in this channel
[16:48] <grayson> Hi, I would like to save my packages, aptoncd not working. which folder (Name) do I save.
[16:48] <kherbouche> Is there a place where I can get the codecs for mplayer to play .rm files on an ibook G4 ppc?
[16:48] <doglino> Yud_Zroc aff
[16:49] <doglino> i can't to write "windows"? Yud_Zroc
[16:49] <dinesh372> Mood: actually i just want to know how to begin to learn linux like taking help from manual pages,web etc
[16:49] <dinesh372> doglino: yes i am switching from windows
[16:49] <samuel> dinesh372: what are you hoping to learn about linux?
[16:50] <chrism> hey everyone.
[16:50] <igogo> dinesh372: man
[16:50] <tor_> Hi guys. I got this weird problem, ubuntu can't detect my SyncMaster 172T monitor
[16:50] <Yud_Zroc> dinesh372: ur best off reading the forums and going around ubuntu on ur own..
[16:50] <chrism> anyone mess with lamp?
[16:50] <Mood> chrism: i'm fiddling with LAMP the last week or so
[16:50] <kherbouche> any idea, please? I need drv4.so.6.0 for ppc :(
[16:50] <dinesh372> exit
[16:51] <chrism> cool, I have it all setup, for whatever reason locally everything is working great
[16:51] <chrism> funny thing is remotely it just hangs
[16:51] <Mood> strange fellow that dinesh372 :-)
[16:52] <Mood> remotely? you mean http://?
[16:52] <chrism> well...I can type in my hostname and it works from my computer or http://127.0.0.1 works too...
[16:52] <grayson> dinesh372, I have a PDF called "Linux All in one desktop reference for dummies 19MB do u want it
[16:52] <Cyber_Hades> How can i define shared folder in fstab if they have 2 words... sample : Milan Micic
[16:52] <Cyber_Hades> ?
[16:52] <Mood> grayson: dinesh372 left :(
[16:52] <chrism> but if I got to another computer..and try it, it hangs..
[16:52] <cakey> 44th president failget
[16:52] <linuxman410> tor check out this link guy here had same problem but got around it http://ubuntuforums.org/archive/index.php/t-391834.html
[16:52] <grayson> Mood, thanks
[16:53] <Mood> chrism: what do you mean "got to another computer..."?
[16:53] <chrism> I mean go to another computer..
[16:53] <chrism> like one not on my network
[16:53] <Mood> you mean outside of your firewall?
[16:53] <chrism> right,
[16:53] <chrism> router.
[16:54] <Cyber_Hades> in fstab :    //192.168.0.1/   >>>Milan Micic<<<  /media/Milan ........
[16:54] <DreamLnr> hello
[16:54] <Mood> have you forwarded your ports?
[16:54] <DreamLnr> hi have a problem with flash on ubuntu
[16:54] <chrism> forwarded? hmm no i dont think so.
[16:54] <chrism> I even took my firewall down though and tried it.
[16:54] <chrism> still nada.
[16:54] <DreamLnr> everytime i load more than one tab of a page, flash crashes and no longer comes back
[16:54] <DreamLnr> especially with firefox
[16:54] <DreamLnr> dmesg says: [26351.151721] npviewer.bin[11085]: segfault at 0000000073746962 rip 00000000f7a9e6fe rsp 00000000f5b3fc60 error 4
[16:55] <Cyber_Hades> How can define blank character in fstab ??? I must put mount point for this shared folder "Milan Micic" in fstab ??
[16:55] <chrism> but im on wireless I think I may have to configure bind possibly?
[16:55] <DreamLnr> how do i fix it?
[16:55] <Mood> you need to "poke" a hole into your firewall: http://portforward.com
[16:55] <chrism> cool Ill check it out.
[16:55] <chrism> thanks.
[16:55] <poncio> hi! the other day i had a problem me the latest kernel version so i had to reinstall it using the following command "sudo apt-get update; sudo apt-get install --reinstall linux-generic linux-image-2.6.24-23-generic; sudo dpkg-reconfigure linux-image-2.6.24-23-generic" the problem is now my graphics card drivers are not instaled, why? how do i solve this?
[16:55] <yavapai> let it ring
[16:56] <farf> when i try to install my nvidia driver through admin -> hardware, it says downloading and installing but it closes and says my card isnt activated, what can i do
[16:59] <b3nux> you know how you used to be able to use alt and mouse scroll to change the opacity of a window...well, i've now got 8.10 and i can't seem to do it anymore - any ideas why?
[16:59] <Cyber_Hades> i must put 2 word name folder in fstab... "Milan Micic" .. how can i define blank character in fstab ???
[16:59] <Arenlor> b3nux: check your compiz key bindings
[16:59] <b3nux> ok - will do, cheers
[17:00] <Cyber_Hades> eny.... ????
[17:00] <Arenlor> Cyber_Hades: Try escaping it
[17:00] <farf> whats the command to open the xorg.conf from prompt so i can edit it
[17:00] <fivemack> how do I troubleshoot LDAP client setup?
[17:00] <oCean_> Cyber_Hades: I think you have to use an octal code
[17:00] <Arenlor> farf: 'sudo nano /etc/X11/xorg.conf' should do
[17:00] <dougiel> farf, nano /ect/X11/xorg.conf
[17:01] <dougiel> I am running 8.04 and when I "sudo /etc/init.d/lirc restart" I get  * Unable to load LIRC kernel modules. Verify your * selected kernel modules in /etc/lirc/hardware.conf - any suggestions?
[17:01] <WaY> hello
[17:01] <Cyber_Hades> Yes, but my shared folder have name "Milan Micic"... i must put mount point for that folder in fstab, but i do not how to define BLANK character ????
[17:01] <farf> ok, when it opens, ive got a black screen w/ different options at the bottom...how do i edit whats in the file?
[17:01] <samuel> how do you set the character set of a terminal?
[17:01] <DreamLnr> hi have a problem with flash on ubuntu. everytime i load more than one tab of a page, flash crashes and no longer comes back, especially with firefox. dmesg says: [26351.151721] npviewer.bin[11085]: segfault at 0000000073746962 rip 00000000f7a9e6fe rsp 00000000f5b3fc60 error 4. How do i fix it?
[17:01] <dougiel> farf, should be full of stuff
[17:01] <MOUD> anyone using ubuntu 8.10 amd64 with Firefox and java?
[17:02] <oCean_> Cyber_Hades: As i said, I think you have to use ocatal notation, let me see man ascii
[17:02] <funkyHat> I've just set a passphrase on my ssh rsa key, and then tried it out by connecting to one of my other hosts, but it didn't ask me for a passphrase... is it cacheing the key or something?
[17:02] <WaY> sometimes when I write on my xchat, amsn, etc text lines doesn't actualize properly and continues appearing twice last line written. What should I do?
[17:02] <Cyber_Hades> Ok.
[17:02] <farf> its completely empty and says new file at the bottom
[17:02] <Arenlor> Obama is now President of the United States of America
[17:02] <KingWilliam> Huray!!!
[17:02] <WaY> I have actualized my nvidia drivers and still happening
[17:02] <Linuturk> not yet, he hasn't been sworn in
[17:02] <oCean_> Cyber_Hades: so 040 is space in ocatal notation. /path/to/Milan\040\Micic may do the trick
[17:03] <Linuturk> I'm watching the live AP coverage
[17:03] <Cyber_Hades> /192.168.0.1/MilanMicic /media/Milan smbfs 0 0         IT'S NOT WORKING
[17:03] <Cyber_Hades> ok.. reconfigure that for me... please
[17:03] <Cyber_Hades> /192.168.0.1/Milan Micic /media/Milan smbfs 0 0         IT'S NOT WORKING, please reconfigure that for me
[17:03] <oCean_> Cyber_Hades: type \040 where the space should come
[17:04] <Cyber_Hades> OK !!!!
[17:04] <Yud_Zroc> Cyber_Hades: thats an internal ip?
[17:04] <Cyber_Hades> LAN IP
[17:04] <dougiel> farf - you are running x now?
[17:04] <Arenlor> Linuturk: yes he is, it doesn't matter if he's sworn in, it's how the 20th amendment states.
[17:04] <poncio> hi! the other day i had a problem me the latest kernel version so i had to reinstall it using the following command "sudo apt-get update; sudo apt-get install --reinstall linux-generic linux-image-2.6.24-23-generic; sudo dpkg-reconfigure linux-image-2.6.24-23-generic" the problem is now my graphics card drivers are not instaled, why? how do i solve this?
[17:05] <farf> i was trying to edit my xorg.conf to change drivers from vesa to nvidia, but when i open it w/ that command its just a blank screen and says its a new file
[17:05] <oCean_> Everyone, pls stand :)
[17:05] <Cyber_Hades> oCean_ : Thanks ! It's working ;)
[17:05] <oCean_> Cyber_Hades: enjoy!
[17:06] <poncio> farf, you sure you typed "sudo nano /etc/X11/xorg.conf"?
[17:06] <farf> yup
[17:06] <DIFH-iceroot> oCean_: for what?
[17:06] <MOUD> now that's great... from java.com website:   * Please use the 32-bit version for Java applet and Java Web Start support.
[17:07] <poncio> in that case i supose you have to first restore the xorg.conf file...
[17:07] <|neon|> why is it so hard to configure dual monitors using nvidia settings with intrepid randr, i do not want to configure two different size screens with twin view, i want to configure them as separate x screens but after a week i'm giving up any suggestions
[17:08] <farf> is there a way to edit the xorg file from within the desktop
[17:08] <tor_> Dammit, ubuntu 8.10  can't recognize my screen. How do I apply it manually? I tried but seems like it still doesnt regocnize it.
[17:08] <wooli> i installed a package via apt-get.  now i have a newer .deb file that i want to install.  sudo dpkg -i pack.deb says that it's already installed and fails.  how do i upgrade to this
[17:09] <MOUD> is it possible to install a .bin file?
[17:09] <slyuk>  wooli : how about apt-get uninstalling the package, the reinstalling from the .deb ??
[17:09] <petllama> MOUD, you gotta mount it
[17:10] <wooli> slyuk: there's not another way to do it?
[17:10] <wooli> will dpkg install dependencies?
[17:10] <samuel> how do you set the terminal to use utf-8?
[17:10] <oCean_> MOUD: or, if it's an executable (e.g. an install script) you have to chmod +x the file
[17:10] <MOUD> I think it's an executable file
[17:10] <farf> is there a way to edit the xorg file from within the desktop
[17:10] <MOUD> I want to install java 32 bit (on amd 64)
[17:11] <WaY> sometimes when I write on my xchat, amsn, etc text lines doesn't actualize properly and continues appearing twice last line written. What should I do?
[17:14] <farf> ok, gonna try this again.  when installing nvidia drivers from admin-hardware drivers, i click activate, it says downloading then closes the box and takes me to the last screen.  it wont activate the drivers, how can i make it install the nvidia drivers
[17:17] <etech> are there open source OS for normal mobile phones?
[17:17] <WaY> sometimes when I write on my xchat, amsn, etc text lines doesn't actualize properly and continues appearing twice last line written. What should I do?
[17:17] <Jenk> etech, OpeMoko.org
[17:17] <Syrus69> Hello, I can get to hotmail.com on a laptop connected to the same network as this computer (this computer has ubuntu, the laptop is vista), but I can't get to it on this one... any idea why it might happen like that?
[17:17] <Jenk> etech, OpenMoko.org
[17:17] <darthanubis> !atheros
[17:18] <Syrus69> if that's to me, i'm not on wireless
[17:18] <|neon|> why is it so hard to configure dual monitors using nvidia settings with intrepid randr, i do not want to configure two different size screens with twin view, i want to configure them as separate x screens but after a week i'm giving up any suggestions
[17:18] <mib_jxo0avav> I had a question about TCP/IP connections...
[17:18] <farf> ok, gonna try this again.  when installing nvidia drivers from admin-hardware drivers, i click activate, it says downloading then closes the box and takes me to the last screen.  it wont activate the drivers, how can i make it install the nvidia drivers
[17:19] <Jenk> !aptoncd
[17:19] <oCean_> Syrus69: in browser you mean? Ifso, is it only hotmail.com, or other sites also?
[17:20] <etech> Jenk: is there a list of phones which work?
[17:20] <Syrus69> oCean_: yes, in my browser.. it does it for peoplepc, myspace... but some websites work
[17:21] <Jenk> etech, I ain't sure, google may help.
[17:21] <dougiel> farf, you figer it out yet?
[17:21] <oCean_> Syrus69: that's weird. You're on 8.10? Using Firefox?
[17:21] <Syrus69> it starts to load the page, but after a while it just gives up -- i get some source code for the page, but it never shows up (from hotmail that is)
[17:21] <Syrus69> no, i'm on 8.04
[17:22] <Syrus69> oCean_:  yes, i'm using firefox, but i tried to use seamonkey and it still did the same thing
[17:22] <farf> dougiel no
[17:23] <dougiel> farf, with 8.10 I went to nvidia site and got the nvidia installer file and ran it from command prompt without x running...
[17:23] <lvella> hey there
[17:23] <Jenk> etech, n e luck ?
[17:23] <farf> this is my first day w/ ubuntu so...
[17:23] <dougiel> farf, I tried it from a console window while x was runjning ant it complained
[17:23] <linuxman410> Syrus69 i am using 8.10 and 9.04 and do not have problem with hotmail
[17:23] <assargadon> How can I configure "file assosiations"?
[17:23] <lvella> do you know of any software able to record in a movie the actions of a window in the desktop?
[17:23] <farf> so you installed it w/o x running?  im not 100% sure what that means?
[17:24] <dougiel> farf, let's get you thru this then and see what we can do to make drivers load so you can play with ubuntu
[17:24] <farf> lol k
[17:24] <dougiel> farf - lemme get you a link
[17:24] <oCean_> Syrus69: I have no clue as to what could be causing that...
[17:24] <Syrus69> linuxman410: i've been using 8.04 for a few months now, but i haven't had a problem such as this until last night
[17:25] <mrgenixus> I've just had a power failure and I can't seem to authenticate, I'm getting a segfault whenever I try to use su -, login, or passwd
[17:25] <etech> Jenk: no
[17:25] <mrgenixus> my /etc/shadow and /etc/password files seem to be ok
[17:25] <dougiel> farf, go to "http://www.nvidia.com/object/linux_display_ia32_173.14.09.html"
[17:25] <mrgenixus> and I've run debsums on the whole system and nothing seems to be amiss
[17:25] <Pein> HI ALL!
[17:25] <Jenk> etech, what can i do for you ?
[17:25] <Jenk> Pein, HI
[17:26] <chrism> crap I did the portforwarding and still cant reach my lamp from my other computer which means remote people cant view my lamp just me on the actual lamp machine.
[17:26] <Pein> What you name?
[17:26] <dougiel> farf, click on "NVIDIA-Linux-x86-173.14.09.pkg1.run"
[17:26] <dougiel> save that file
[17:26] <Pein> BB ALL!
[17:26] <dougiel> farf, you used linux b4?
[17:27] <farf> k, its downloading, im in canada and canada hates the internet, so takes a min
[17:27] <farf> nope, first experience w/ it
[17:27] <etech> Jenk: i don't know... :) i just wanted to know if there is an opensource OS for mobil phones which can the stuff a usual phone also can
[17:27] <chrism> anyone familiar with lamp?
[17:27] <dougiel> farf, ok - you got a good pick with ubuntu - this should work - winnipeg here you?
[17:27] <nightrid3r> etech: openmoko
[17:27] <chrism> (linux apache mysql php)
[17:27] <Jenk> Pein, a smartphone software ?
[17:27] <farf> kitchener, outside of waterloo
[17:28] <Jenk> etech, a smartphone software /
[17:28] <Heliodor> Hum
[17:28] <dougiel> farf, ok - I used to live in windsor... I know where you are :)
[17:28] <farf> ahh lucky, youre on shaw...rogers here :/
[17:28] <dougiel> farf, also in rural manitoba so I am good there too
[17:29] <chrism> I have a feeling its my sql server
[17:29] <farf> nice
[17:29] <farf> its almost done.....god its so slow
[17:29] <dougiel> farf, you a mac or windows vetran?
[17:29] <farf> windows
[17:29] <Syrus69> does anyone have any idea what might be wrong? =/
[17:29] <farf> know my way around any windows os, but completely lost w/ this lol
[17:30] <dougiel> farf, do you know where that file is being saved?
[17:30] <farf> ok so i downloaded the file, and opened, and its asking what app i want it to open
[17:30] <farf> ya its on my desktop
[17:30] <sl8r> hi. does anyone know how to play wavpack (wv) audio files?
[17:30] <dougiel> farf, no don't open it... you need to run it... it is an exe equivalent
[17:30] <sl8r> let's say in amarok..
[17:30] <farf> kk
[17:31] <coventry> I can write to my main disk as root, but when I try to write to it with a regular account, I get "no space left on device."  Any suggestions as to what might cause this?
[17:31] <dougiel> farf Type "sh NVIDIA-Linux-x86-173.14.09-pkg1.run"
[17:31] <efu> has anyone been able to use the WoW downloader/patcher in wine lately?
[17:31] <dougiel> farf but you need to be at command prompt in the directory where file was saved
[17:31] <blip-> hi all,  i've got an ext3 partition i want to mount, so i've got the line "/dev/sda8 /media/share           ext3    noatime,nodiratime        0       2" in fstabber... my question is what are the 0 and 2 for at the end ?  are those correct or they need modding ?  thanks
[17:31] <blip-> 8.04 hard
[17:32] <oCean_> coventry: first make sure your disk(s) is/are not full (use "df -k command")
[17:32] <oCean_> !paste | blip-
[17:32] <blip-> oCean_: what do want me to paste ?   /etc/fstab ?
[17:32] <farf> says it cant open, i typed that into applications -> accessories -> terminal, do i need to type it somewhere else?
[17:33] <blip-> !!
[17:33] <oCean_> blip-: no, just don't paste here
[17:33] <coventry> oCean_: that's the other weird thing: "df" gives the following output for this disk:
[17:33] <coventry> Filesystem           1K-blocks      Used Available Use% Mounted on
[17:33] <coventry> /dev/sda10           205493580 205277480         0 100% /
[17:33] <coventry>  
[17:33] <coventry> It says that less than the full capacity of the disk is being used, but says there is zero space available.
[17:33] <dougiel> farf - can you get to a command prompt in console or terminal?
[17:33] <oCean_> coventry: do not paste here
[17:33] <coventry> Sorry.
[17:33] <oCean_> coventry: use paste.ubuntu.com for example
[17:33] <coventry> OK, thanks.
[17:34] <blip-> oCean_: don't paste what here ?  I never pasted anything.  i think you've got me confused with someone else
[17:34] <farf> in terminal im at username@username-desktop:-$
[17:34] <farf> and thats where i typed that command, came back with sh: Cant open filename
[17:34] <dougiel> farf, k do a 'ls' that is a dir equivalent
[17:34] <r3r3>  hello, anyone with a fast connection to help for a speed test? www.analog-data.ch/100mb.bin
[17:34] <r3r3> please
[17:34] <farf> k
[17:34] <dougiel> farf, do you see the run file?
[17:34] <tv7497> guys i have enabled the animation options in ccsm now ow do i animate my windows i couldnt find any key shortcuts there
[17:34] <oCean_> blip-: first number is an option to dump (backup) second number is option for filesystem-checking
[17:35] <oCean_> coventry: ok, your root disk is 100% full
[17:35] <farf> no, when i did ls it came back in blue letters desktop documents (teal letters) example music pictures public templates videos
[17:35] <farf> im assuming im in the examples dir since its teal?
[17:35] <blip-> oCean_: oh i see, for some reason my home dir has 0,2 while my root has 0,1... will 0,1 be fine do you think for my 3rd partition ?
[17:36] <dougiel> farf, username@username-desktop
[17:36] <tv7497> bazhang: hello sir little help
[17:36] <coventry> oCean_: But the thing is, it's not.  The actual usage numbers output by df don't add up to full capacity, I can write to the disk as root without getting a "no space left on device" message, and I have removed several large files.
[17:36] <farf> thats what the prompt says right before i can start typing
[17:36] <dougiel> farf, means you are in username on the computer username-desktop
[17:36] <blip-> oCean_: oh i found it in the manpage nvm.  i ave 2 put 2
[17:36] <blip-> thanks
[17:36] <farf> ahh k
[17:36] <Mimi> Hello, if you've got a MX1000 (Logitech MediaPlay) mouse, and all the buttons work, could I have your xorg.conf? Mine stoped working all of a sudden, and the stuff online didn't work
[17:36] <dougiel> farf, cd Desktop
[17:36] <oCean_> blip-: 2 would be fine.
[17:37] <MOUD_> I just did " sudo chmod +x jre-6u11-linux-i586.bin  " , what now?  No message appeared on the terminal but no error also
[17:37] <oCean_> coventry: the actual number might not be 100% accurate.
[17:37] <farf> dougiel, 'bash: cd: desktop: no such file or directory'
[17:37] <dougiel> farf, do you see your prompt changed and you are in the Desktop directory?
[17:37] <clee-saan> Hi, when i plug to my computer a mp3 player or usb key or mobile phone or whatever through usb, the device says it's connected, but the computer does not do anything. It used to work, with the very same devices a few days ago but not anymore. Help ?
[17:37] <dougiel> farf, capitalization counts in linux
[17:37] <dougiel> farf, Desktop
[17:37] <farf> ahhh lol that figures
[17:38] <farf> kk im in desktop dir now
[17:38] <coventry> oCean_: fine, but what about the other evidence?  Even root gets a "no space left on device" error when the disk is full, doesn't it?  Removing files should fix the problem, shouldn't it?
[17:38] <dougiel> farf, ls =?
[17:38] <farf> shows the file, run the same sh command now?
[17:38] <dougiel> farf, you see the run file now?
[17:38] <farf> ya
[17:39] <farf> tried the sh filename but it says cant open it again
[17:39] <dougiel> farf, ok do the sh command there... hit the up arrow key to scroll thru the commands you have typed in already
[17:39] <oCean_> coventry: well, root might have a little bit more slack there... for security reasons. I'd say it's cleanup time :)
[17:39] <farf> is the file name supposed to be case sensitive?
[17:39] <dougiel> farf, if you keep hitting the up arrow key you will find the sh command you already typed and hit enter and... yes case sensative
[17:39] <oCean_> farf: all of linux is case sensitive :)
[17:40] <nuaimat> guys, i am having the following error upon running `sudo apt-get update` , the error is W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/intrepid-updates/restricted/binary-i386/Packages.bz2  Hash Sum mismatch
[17:40] <nuaimat> E: Some index files failed to download, they have been ignored, or old ones used instead.  please note i have already tried
[17:40] <nuaimat>  sudo apt-get purge anon-proxy but with no success !
[17:40] <farf> lol wow i feel like such a noob, it ran it that time
[17:40] <coventry> oCean_: according to df, I have 216M of space!
[17:40] <farf> however, once it starts running says it needs to be run as root, how do i change to root
[17:40] <oCean_> !paste | nuaimat
[17:40] <dougiel> farf, did it complain about x running?
[17:41] <MOUD_> I just did " sudo chmod +x jre-6u11-linux-i586.bin  " , what now?  No message appeared on the terminal but no error also, how can I install it?
[17:41] <farf> nope, it takes me to the installer but the installer needs to be ran as root
[17:41] <oCean_> coventry: available was 0%.. a few moments ago
[17:41] <dougiel> farf, ok same command preceeded by sudo...
[17:41] <funkyHat> I've just set a passphrase on my ssh rsa key, and then tried it out by connecting to one of my other hosts, but it didn't ask me for a passphrase... is it cacheing the key or something?
[17:41] <farf> so sudo sh filename?
[17:41] <coventry> oCean_: yes but that is discrepant with the actual usage numbers reported by df.
[17:41] <dougiel> farf "sudo sh NVIDIA-Linux-x86-173.14.09.pkg1.run"
[17:42] <nuaimat> guys, repository update problem, please see http://paste.ubuntu.com/107393/
[17:42] <dougiel> farf, did it complain about x running?
[17:42] <|neon|> why is it so hard to configure dual monitors using nvidia settings with intrepid randr, i do not want to configure two different size screens with twin view, i want to configure them as separate x screens but after a week i'm giving up any suggestions
[17:42] <farf> yes
[17:42] <monokrome> Does anyone know how to change the domain name setting on my Ubuntu system?
[17:42] <farf> says please exit x before installing
[17:42] <farf> what exactly is x?
[17:42] <monokrome> I've know how to change hostname, but not domainname
[17:42] <nuaimat> monokrome: edit /etc/hostname
[17:42] <BCampbell> any recommendations for a WYSIWYG php/html editor?
[17:42] <dougiel> farf, k ... x = point and click environment
[17:43] <digitalj> Adobe Dreamweaver
[17:43] <farf> ahh k, so ctrl alt f1 and do the command?
[17:43] <monokrome> nuaimat: Doesn't that only change the hostname?..
[17:43] <BCampbell> sorry..meant FOSS html/php editor
[17:43] <monokrome> IE, can I put: flavor.monokro.me in it?
[17:43] <dougiel> farf, kill x then do that
[17:43] <troynt> BCampbell: Aptana, but it isn't wysiwyg
[17:43] <farf> just do ctrl alt f1? will that close it or just hide it?
[17:43] <dougiel> "killlall gdm" = shut down x?
[17:44] <nuaimat> monokrome: yes, i think so, but i am not sure of it
[17:44] <dougiel> farf, just hide it
[17:44] <dougiel> how do you killall x to install nvidia drivers?
[17:44] <BCampbell> thanks troynt...i'll look into it
[17:45] <BCampbell> to kill x:  sudo /etc/init.d/gdm stop
[17:45] <nuaimat> guys, i have a problem when updating repository , please see http://paste.ubuntu.com/107393/ , can anyone help me please ?
[17:45] <dougiel> BCampbell, thanks
[17:45] <dougiel> farf did you get that?
[17:45] <farf> yup
[17:45] <Jenk> BCampbell, can you help me /
[17:46] <farf> waiting for it to finish doing what its doing, says checking battery state
[17:46] <a931bw> Hi all
[17:46] <farf> nm guess i can type now
[17:46] <BCampbell> and to restart sudo /etc/init.d/gdm start
[17:46] <a931bw> What i'm need to do?
[17:46] <a931bw> i'm downloading ubuntu
[17:46] <BCampbell> jenk:  what do you need
[17:46] <Mimi> Hey, I'm following a arch guide, and it tells to sync a package using pacman (# pacman --sync xvkbd) .... how do I do this in Ubuntu? Thanks in advance
[17:46] <dougiel> did you catch the start command?
[17:46] <a931bw> And can i'm install it with Flash drive 16 gb?
[17:46] <dougiel> BCampbell, thanks
[17:46] <Jenk> BCampbell, i need help using aptoncd
[17:46] <BCampbell> dougiel welcome
[17:47] <BCampbell> jenk:  never heard of it sorry
[17:47] <X1karr0usX> hello all
[17:47] <dougiel> BCampbell, you know about lirc and 8.04?
[17:47] <Jenk> BCampbell, allright. Thanks anyway for your concern .
[17:47] <BCampbell> Jenk:  nope sorry
[17:48] <farf> ok
[17:48] <Jenk> BCampbell, thanks
[17:48] <farf> so
[17:48] <X1karr0usX> anyone having ubuntu issues?
[17:48] <farf> when i do the sh command to run it
[17:48] <dougiel> I am running 8.04 and when I "sudo /etc/init.d/lirc restart" I get  * Unable to load LIRC kernel modules. Verify your * selected kernel modules in /etc/lirc/hardware.conf - any suggestions?
[17:48] <nuaimat> guys, if no one can help me (http://paste.ubuntu.com/107393/) please someone give me a hint what to google for ?
[17:48] <dougiel> farf, ?
[17:48] <farf> hen i get to the 173.14.09 part of the filename, it gives different characters and doesnt do anything
[17:48] <bazhang> nuaimat, your sources.list?
[17:48] <BCampbell> farf, gussing you need to update Nvidia drivers?  be very careful..tried to update to 180.22 ysterday..totally killed my system
[17:48] <nuaimat> bazhang: just a sec, ok
[17:48] <farf> or am i supposed to just stop and then start it again
[17:49] <farf> bcampbell trying to install them for the first time :/ been trying since 8 am today
[17:49] <a931bw> Nuai Just fresh install
[17:49] <a931bw> i'm tryed to do it it unable!
[17:49] <farf> ive read more friggin faqs and documents than i care to remember, but none of them come close to helping me install these stupid drivers
[17:49] <nuaimat> bazhang: http://paste.ubuntu.com/107396/
[17:49] <coventry> oCean_: you are correct that the filesystem gives more space to root.  ext2 and 3 reserve 5% for root by default.  Thanks for your help.
[17:49] <dougiel> farf, what are you doing?
[17:49] <lfaraone> Hi, is it possible to use a USB device as home with a livecd?
[17:50] <BCampbell> farf, the Administration -> Hardware Drivers applet should let you install with out killing X
[17:50] <farf> i stopped x, am i supposed to do the sh command here?
[17:50] <r3r3> hello, anyone with a fast connection to help for a speed test please? let me know how fast you get this and where you are located thx :)www.analog-data.ch/100mb.bin
[17:50] <r3r3> hello, anyone with a fast connection to help for a speed test please? let me know how fast you get this and where you are located thx :) www.analog-data.ch/100mb.bin
[17:50] <a931bw> How to install ubuntu from usb drive?
[17:50] <dougiel> farf, what are you chatting with?
[17:50] <BCampbell> farf yes sudo sh N....run from there
[17:50] <farf> bcampbell tried it, when i clicked to activate the drivers it said downloading/installing, but then closed the box and said drivers werent activated
[17:50] <farf> im on my other computer, the other desktop is the one w/ linux, this is my xp machine
[17:50] <bazhang> nuaimat, you are getting an error with the google repo?
[17:51] <nuaimat> bazhang: no, http://paste.ubuntu.com/107393/
[17:51] <dougiel> farf, ok - x is done do ....
[17:51] <keystr0k> When I hit the mute button on my keyboard, the graphical overlay comes up to show that the volume is muted, however, the sounds isn't actually muted.
[17:51] <dougiel> farf "sudo sh NVIDIA-Linux-x86-173.14.09.pkg1.run"
[17:51] <BCampbell> farf, run the sh script from the command line,
[17:51] <keystr0k> If I turn the volume all the way down the mute icon shows and the music is muted.
[17:51] <clee-saan> Hi, when i plug to my computer a mp3 player or usb key or mobile phone or whatever through usb, the device says it's connected, but the computer does not do anything. It used to work, with the very same devices a few days ago but not anymore. Help ?
[17:51] <mewshi> hey, I fixed it :D
[17:51] <keystr0k> Any ideas what's going wrong with the Mute button?
[17:52] <root> a
[17:52] <BCampbell> then when done sudo shutdown -r 0 this will reboot the machine and hopefully back into X with the new driver
[17:52] <root> name
[17:52] <nuaimat> bazhang: any idea whats wrong ?
[17:52] <bazhang> nuaimat, did you try to comment out the intrepid-updates repo? ie put a # in front of them, update and try again
[17:53] <Mimi> Ubuntu does not use xorg.conf for mouse configuration anymore, right? So, where can I go configure my mouse now?
[17:53] <farf> ok, so, i figured out why it wouldnt run that command before...i used the numpad on the keyboard and it wouldnt type the characters....but now i got the command typed in, but its just sitting there w/ the flashing _
[17:53] <nuaimat> bazhang: ok , i will try it now, but i will loose some updates !
[17:53] <bazhang> nuaimat, better yet
[17:53] <BCampbell> farf, it may take some time to run the script
[17:53] <bazhang> nuaimat, go to software sources and change to a different server
[17:53] <farf> should it give me any indication its doing anything?
[17:54] <dougiel> farf, how old/slow it that machine?
[17:54] <nuaimat> bazhang: i have tried that before , with no success too
[17:54] <farf> relatively old, single core but not horribly old, gig of ram etc
[17:54] <root> quit
[17:54] <BCampbell> farf, yes you should get an ugly looking screen with status messages
[17:54] <bazhang> nuaimat, that is odd; what are you trying to do when this occurs
[17:54] <nyaa> farf: I sent you a message
[17:54] <Rencx> hell, i want now how to write somthing on hdd from iso file?
[17:54] <nuaimat> bazhang: i think my ISP is using a caching server, that the checksum is outdated or the file is outdated
[17:54] <farf> ya i dont have that screen
[17:54] <Rencx> hello, i want now how to write somthing on hdd from iso file?
[17:54] <dakira> hi.. in the terminal I want to list all directories in the current working directory.. I tried "find -maxdepth 1 -type d" but that also lists " . " which I don't want.. any hints?
[17:55] <nuaimat> bazhang: how can i force apt not to use cached versions on my ISP cache server ?
[17:55] <bazhang> Rencx, what do you mean from an iso
[17:55] <dougiel> farf, you hit enter after you typed in the command right - lol?
[17:55] <farf> i did sudo sh NVIDIA-Linux-x86-173.14.09-pkg1.run
 i have iso image how i can istall it?
[17:55] <dakira> to clarify.. my goal is to copy all directories from dir A to dir B.. but only the directories
[17:55] <farf> lol ya i hit enter :p
[17:55] <farf> and it just sits there, i can type, but it didnt start to load anything
[17:56] <dougiel> type ls and hit enter
[17:56] <bazhang> nuaimat, not sure about that one; never had experience with that
[17:56] <bazhang> Rencx, what iso
[17:56] <dougiel> farf, type ls and hit enter and tell me what happens
[17:56] <BCampbell> farf, hit enter again see if the prompt comes back
[17:56] <nuaimat> guys, how can i force APT to use a fresh copy of all repositories if i suspect that my ISP is using a caching server ???
[17:56] <farf> does nothing
[17:56] <Enissay> Hi, i'm using 2 conky's script, the 1st is executed by "conky&" command and i'm using a bash file to launch it 60s after system start so it can be correctly displayed by compiz(http://pastebin.com/d3c8b8058). For the 2nd i use this command "conky -c /usr/share/conkyforecast/conkyrc &;". I tried to create a similar script but it's not working probably because of the spaces in the command... How can i fix it please?
[17:56] <BCampbell> what prompt farf?
[17:56] <farf> should i have the actual prompt, as in username@username etc
[17:56] <BCampbell> yes
[17:56] <farf> its just a flashing _
[17:57] <farf> i dont have the username then
[17:57] <Jenk> bazhang, can u help me ?
[17:57] <farf> the prompt rather
[17:57] <dougiel> BCampbell, sh$ ?
[17:57] <nutzer> mein erster Kontakt
 you now what is iso?
[17:57] <bazhang> Jenk, ask the channel
[17:57] <gofg> Firefox can play audio, as can Ubuntu, but all other applications simply do not play audio (audacious, pidgin alert sounds, amarok, rhythmbox, vlc, etc). Amarok gives an error "xine cannot initialize any audio drivers", but that's the only error i get. Anyone help me out?
[17:57] <BCampbell> dougiel, maybe at a bit of a loss here
[17:57] <dougiel> same
[17:57] <bazhang> Rencx, certainly. iso of linux distro, movie  or other
[17:57] <Jenk> bazhang, allright
[17:57] <farf> should i restart x and try again?
[17:57] <nutzer> Hallo
[17:57] <dougiel> farf, no x
[17:57] <dougiel> farf, hit ctrl+c
[17:58] <BCampbell> farf, i woudl restart the machine, not just X
[17:58] <Jenk> could someone help me using aptoncd ??
[17:58] <farf> k, ive got a ^C after ctrl c
[17:58] <dougiel> BCampbell, he had not xorg.conf file either
[17:58] <dougiel> not = no
[17:58] <BCampbell> dougiel, looks that way
[17:58] <farf> i edited the xorg.conf file before though
[17:58] <farf> thats how i got into the desktop in the first place lol
[17:59] <farf> had to tell it to use vesa drivers so it would get past the running in low graphics mode
[17:59] <farf> so now that im past that and in the system i was trying to install the nvidia drivers
[17:59] <dougiel> farf, did you use control c to stop the sh command?
 ISO image is an archive file (a.k.a. disk image) of an optical disc. and i need write my program to pc
[18:00] <farf> i hit it and it gave me a ^C, so nothing was running
[18:00] <BCampbell> farf, when you first did the install this was from a live cd?
[18:00] <farf> ya
[18:00] <dougiel> so what does your prompt look like?
[18:00] <farf> nothing now, i restarted :p
[18:00] <BCampbell> did you test it in live mode or staright to install?
[18:00] <balzac_> hello
[18:00] <Pikiriman> #merida
[18:00] <dougiel> lol
[18:00] <farf> but it used to be just a flashing _
[18:00] <farf> i tested it
[18:00] <farf> and everything worked out fine
[18:01] <bazhang> Rencx, yes I am aware of that; the question you failed to answer was an iso file of what exactly
[18:01] <BCampbell> then I would do a reinstall and try again..unless there is data on the drive that can't be lost
[18:01] <adac> Is it possible to install ubuntu over vnc? If yes, what steps do I have to take?
[18:01] <dougiel> I think you borked your xorg.conf and now the nvidia installer is borked cuz there is now xorg.conf = just a guess
[18:02] <ZeroA4> Rencx, you heva never burned an iso ?
[18:02] <BCampbell> dougiel, I agree
[18:02] <farf> is there a way to open the xorg file from the desktop?
[18:02] <valued_customer> I'm trying a run an Ubuntu live CD, but I get an "out of range" error from the video monitor. Using "safe" video doesn't help. Are there any other options?
[18:02] <dougiel> farf there is a way to do evrey thing in linux
[18:03] <dougiel> farf, is that machine still running?
[18:03] <wassy121> dougiel: divide by zero?
[18:03] <farf> k, can i open the xorg file and see if its intact? or fix it somehow lol
[18:03] <ZeroA4> valued_customer, F6 on the boot screen give you some advanced options
[18:03] <farf> ya, its back into the desktop now
[18:03] <dougiel> wassy121, lol
[18:03] <dougiel> farf, use tab completion... like this
 no why burn i need mount it
[18:04] <dougiel> farf, nan(tab)(space)et(tab)X(tab)xorg(tab) do not hit enter and tell me what it says
[18:05] <bazhang> !iso | Rencx
[18:05] <ZeroA4> Rencx, what you use to mount ?
[18:05] <farf> erm, lol where do i do that at, and am i just typing nan and whatnot?
[18:05] <Deany> gmountiso is good
[18:05] <dougiel> farf, do that at a username@username-desktop prompt
[18:06] <dougiel> when you hit tab it should complete the partial data you were typing
[18:06] <emrah> slm
[18:06] <farf> k
[18:06] <farf> sec
[18:06] <dougiel> farf, you command should look like nano /etc/X11/xorg.conf
[18:06] <emrah> neyi
[18:07] <supabunny> Does anyone here know where i can get Atheros drivers that work? I can't seem to get madwifi to work =(
[18:07] <dougiel> farf, if it does not you need to reinstall
[18:07] <emrah> neyyyyyyyyyyyyyy
[18:07] <farf> ok, so ya its got the command
[18:07] <farf> and it opens, but says its a new file
[18:07] <farf> so, format and reinstall?
[18:08] <BCampbell> farf, my vote is yes, reinstall
[18:08] <farf> blarg
[18:08] <farf> k
[18:08] <dougiel> farf, if you used the tab key it would not say new file
[18:08] <farf> should i redo the partition and everything or just reinstal?
[18:08] <emrah> do you speak turkish
[18:08] <bazhang> emrah, #ubuntu-tr
[18:08] <dougiel> farf, how many partitions are there?
[18:09] <farf> just 1 should be
[18:09] <BCampbell> farf, i prefer to wipe and reinstall, but it's your choice...
[18:09] <dougiel> farf, wipe and reinstall
[18:09] <BCampbell> call in the nukes??
[18:09] <farf> they've been on standby since 8 am
[18:09] <BCampbell> lol
[18:10]  * dougiel sends a drive strike to farf's box
[18:10] <shay_> guys im having a problem: most of the configurations i make - main menu configs, desktop configs and even some system updates are not being saved, as if their folders are read only or somethin
[18:10] <clarks> anyone here how to hack using ubuntu
[18:10] <technoburn> hello @ubunt
[18:11] <BCampbell> farf, just so you know I had the same basic issue yesterday when I tried to install 180.22 from Nvidia...I wiped and reinstalled this AM
[18:11] <bazhang> clarks, no
[18:11] <bazhang> clarks, that is not welcome here.
[18:11] <farf> damned nvidia :(
[18:11] <dougiel> farf, you should be able to select a option from grub to get x working out of the box... then it is just the one file from nvidia you need to run... it edit's xorg.conf automatically
[18:11] <vigo> Does a package exist that ill let me save passwords and hashes to a floppy?
[18:11] <farf> aww hell
[18:11] <BCampbell> i'm running a mythbutnu install...so my video is very important
[18:11] <farf> i didnt save the nvidia file
[18:11] <vigo> *will
[18:12] <linuxman410> i had same problem with old geforce 4  440mx i took it out and bought ati 9200se and works perfect
[18:12] <BCampbell> farf, once you get a good install you should be able to install the Nvidia driver from the drivers app
[18:12] <dougiel> BCampbell, what are you using for a remote for myth?
[18:12] <farf> brb desperately need a smoke
[18:12] <BCampbell> dougiel, no remote just picked up a pvr150 this is my first foray into myth
[18:12]  * dougiel has desktop downstairs and tv upstairs
[18:13] <dougiel> BCampbell, and how does it work for you?
[18:13] <cellcore> Hi.. I am new to linux and I am having a problem.. Today i tried to boot my ubuntu just as I normaly do but I just don't boot. And I only get this message "Ubuntu 7.10 computername tty". Can anyone help me?
[18:13] <|neon|> why is it so hard to configure dual monitors using nvidia settings with intrepid randr, i do not want to configure two different size screens with twin view, i want to configure them as separate x screens but after a week i'm giving up any suggestions
[18:14] <bliZZardz> how do i schedule downloads in Transmission?
[18:14] <BCampbell> dougiel, hard to tell..if I could keep from f-ing up my video I might be able to find out.  getting green artifacts in the video, which is what sent me on the quest for better drivers
[18:14] <dougiel> |neon|, I have mine doing that now - what symptoms are you experiencing?
[18:15] <vigo> cellcore: I just woke up, I do not know what tty is, but I will search the forums for you
[18:15] <valued_customer> cellcore, you booted fine.
[18:16] <valued_customer> cellcore, the problem is that you have multiple terminals available - some in text mode, some in graphics mode.
[18:16] <dougiel> BCampbell, have you tried vdr - that has always been a bit easier to config... I have yet to see mythtv display tv (been 3 years I have had my dvb card) and only vdr ever worked
[18:16] <dury> hi there channel :)
[18:16] <nyaa> cellcore tty deals with keyboards from my understanding, I guess I'm make sure that the keyboard is plugged in and that nothing is pressing the buttons (sort of a guess though heh)
[18:17] <BCampbell> dougiel, no is it in the repositires?
[18:17] <nyaa> gad I was defeated
[18:17] <valued_customer> cellcore, you're probably looking at a text terminai. You can toggle between terminals with Ctrl+Alt+Fn, where "Fn" is a function key. Try Ctrl+Alt+F7 to get a "graphic" terminal.
[18:17] <dury> shockwave player for firefox under ubuntu
[18:17] <|neon|> dougiel: i have a laptop screen res 1440x900 i have an external lcd res 1600x1200 when i tried to configure as separate x screens, the external lcd only shows like 2/3 of the screen i cannn't change the res, if i use twin view it covers the entire screen on both the laptop and lcd but the laptop having the smaler res looks funny, i want oto have them as separate screens working independent
[18:18] <dury> is it possible
[18:18] <dougiel> BCampbell, I dunno... I kinda have a buddy that does live cds and I install the complete system with developers source
[18:18] <adac>  Is it possible to install ubuntu over vnc? If yes, what steps do I have to take?
[18:18] <nyaa> |neon| so you can make them separate and independent but run into issues graphically?  or is it totally impossible
[18:18] <BCampbell> dougiel, seems to be...downloading now
[18:19] <dougiel> |neon|, it is your compiz - turn it of and see what 2 x sessions gives you - I just figer'd it out on my config today... the left portion of the screen displays cut off image correct?
[18:19] <Slown> hello
[18:19] <Slown> I try access to asterisk channel
[18:19] <dougiel> |neon|, of = off
[18:19] <Slown> but I can't
[18:19] <Slown> how I can join the channel
[18:19] <Slown> thanks
[18:20] <dougiel> BCampbell, what version?
[18:20] <fuser> hey, i am new to irc,  how to join different channels??
[18:20] <|neon|> dougiel: yes
[18:20] <|neon|> dougiel: i will try disabling compiz and see thx for the suggestion
[18:20] <dougiel> |neon|, do you know how to disable compiz?
[18:21] <_illuminati> dougiel, remove compiz. lol
[18:21] <BCampbell> dougiel, lookslike 1.6.0-5
[18:21] <|neon|> dougiel: yes
[18:21] <sakamoto> is there a good all-in-hardware solution to install xbmc (windows)
[18:21] <sakamoto> it should be small
[18:21] <Prez00> hello
[18:21] <sakamoto> i start to feel the limits of my xbox1
[18:22] <BCampbell> fuser, "/join #<channel name>
[18:22] <sakamoto> any suggestions
[18:22] <sakamoto> ?
[18:22] <elfgoh> hi, i juz installed ubuntu from the minimal install... but my quote keys do not work
[18:22] <valued_customer> what are the "video" options for the live cd? i get a video "out of range" using defaults or safe mode.
[18:22] <fuser> thanx BCampbell
[18:22] <elfgoh> can any1 help me?
[18:22] <dougiel> |neon|, lemme know... I had 4:3 display as primary and 16:9 as secondary but I am sure that is the issue
[18:23] <|neon|> dougiel: i will let you know
[18:23] <dougiel> thx
[18:23] <shubbar> elfgoh, guote key?
[18:23] <fuser> can i get the whole channel list BCampbell
[18:23] <elfgoh> ¨
[18:23] <dougiel> I think it is a compiz bug but not knowing enuff I never reported it or anything
[18:23] <Prez00> this is very strange, I was running latest ubuntu on my Lenovo x61 with latest 2.6.28 kernel.  I fiddled with sound config in kernel for 2.6.28.1 and laptop started perfectly, but no sound.  Now I go to generic ubuntu kernel 2.6.27 and still no sound, while this used to work perfectly.  X61 has Intel HD, i tried the sound controls on laptop, fiddling with sound preferences, nothing, any ideas?
[18:23] <shubbar> elfgoh, may be you need to change the keyboard layout
[18:24] <elfgoh> shubbar,: how do i do that frm the CLI?
[18:24] <elfgoh> i am using lxde
[18:24] <elfgoh> no gnome
[18:24] <Prez00> i shutdown the machine completely just to be sure, and still nothing with known working kernels...
[18:24] <BCampbell> fuser, which client are you using?
[18:24] <elfgoh> i cannt find xorg.conf
[18:24] <elfgoh> running on intrepid
[18:24] <nyaa> elfgoh look in /ect/X11
[18:24] <elfgoh> so hw do I change my keyboard layout?
[18:25] <elfgoh> nyaa: ok.. try tt nw
[18:25] <dennda> How can I customize the default icon for an application? The default urxvt icon is pretty ugly and I want to replace it
[18:25] <shubbar> elfgoh, from System > Preferences > Keyboard  and then Layout tab
[18:25] <Prez00> I get no errors when trying to play something, but no sound...tried headphone jack nothing...
[18:25] <elfgoh> nyaa: it is empty
[18:25] <elfgoh> xorg.conf is empty
[18:26] <elfgoh> shubbar: i am using lxde instead of gnome
[18:26] <elfgoh> so that tip does not help
[18:26] <dougiel> elfgoh, /etc/X11/xorg.conf = empty?
[18:26] <dennda> nvm, I'll just replace it in pixmaps
[18:26] <farf> ok so, im trying to format and reinstall....rebooted w/ the cd and everything, starts to load after i click install ubuntu, now im stuck at a prompt of ubuntu@ubuntu:~$
[18:26] <valued_customer> cellcore, that's odd...
[18:26] <farf> so, how can i reinstall it :p
[18:26] <Lorenzo> Hey all, quick question.  I have a Memorex mx4400rf.  I know, I know, it's rather old.  But it's been my only way of getting internet on my laptop.  How can I get Ubuntu to recognize it?
[18:26] <Lorenzo> Oh -- I forgot to mention, that it's a wireless adaptor.
[18:26] <Rezzie> Is the bootchart web renderer down, and if so how can I render my bootchart.tgz log (offline or alternative renderers)? I have tried using a web browser and curl for online, and "java -jar bootchart.jar" and "java -cp bootchart.jar org.bootchart.Main" locally but neither work for offline rendering.
[18:27] <elfgoh> dougiel, yes xorg.conf is empty
[18:27] <dougiel> farf, you rebooted cd with default options?
[18:27] <shay_> guys im having a problem: most of the configurations i make - main menu configs, desktop configs and even some system updates are not being saved, as if their folders are read only or somethin
[18:27] <farf> yup
[18:27] <dougiel> elfgoh, farf did that too - dunno what to say
[18:27] <farf> takes me to where i can try ubuntu etc, clicked install, and now its at that prompt
[18:27] <orudie> how do i add a user in terminal ?
[18:28] <dougiel> farf, there is an option to boot live cd in vesa mode correct?
[18:28] <ASULutzy> orudie: adduser
[18:28] <farf> lemme look, the last time i got to vesa mode was to edit the xorg.conf file
[18:28] <farf> should i boot to the live cd?
[18:29] <dougiel> farf, reboot the cd again and hit the down arrow key (to stop auto starting) and tell me what options you have.
[18:29] <Lorenzo> Hello-lo-lo-loooo
[18:29] <farf> ok, right now im at the ubuntu screen, has try ubuntu w/o changes, install, check cd for defets, test memory, boot from hd
[18:29] <Lorenzo> help-elp-lp-lp-p...
[18:29] <farf> i pressed f4 to get the other option and i can do normal or safe graphics mode (last time that didnt work for me)
[18:30] <ASULutzy> Lorenzo: That's not necessary, just explain the problem you're having
[18:30] <ytoox> hey, I am using an atheros card and the internet acts very strange when I use the wireless.
[18:30] <ytoox> I need help to solve the problem
[18:30] <gerob> hey all, finally got my video card working and now Im wondering how I get the nicer themes on my desktop like some of the Compiz or Emerald ones
[18:30] <piquadrat> Hi! My aptitude is complaining that it can't find some public keys for a couple PPAs I'm using. The fingerprints are 778978B00F7992B0 and 632D16BB0C713DA6. Where can I find those keys?
[18:31] <plytheman> hey guys, has anyone installed Neverwinter Nights?
[18:31] <ASULutzy> gerob: You can just go to System -> Preferences -> Appearance and then desktop effects I think... For more modular control, I suggest doing sudo apt-get install compizconfig-settings-manager
[18:31] <dougiel> farf, do the safe graphics mode and tell me what happens
[18:32] <studiodartisan> hye all
[18:32] <Lorenzo> ASULutzy -- I imagine it's something really easy, but I am an hour fresh to Ubuntu.  I have a really old wireless adaptor, a Memorex mx4400rf.  I have it plugged in to my USB but do not know how to get Ubuntu to recognize it.
[18:32] <ytoox> hey, anyone can give me a hand
[18:32] <ytoox> ?
[18:32] <dougiel> farf, what kind of video card do you have?
[18:32] <farf> k, so, i pressed enter on safe graphics, do i do try ubuntu or install ubuntu?
[18:32] <farf> gefore 6200
[18:33] <Rezzie> Is the bootchart web renderer down, and if so how can I render my bootchart.tgz log (offline or alternative renderers)? I have tried using a web browser and curl for online, and "java -jar bootchart.jar" and "java -cp bootchart.jar org.bootchart.Main" locally but neither work for offline rendering.
[18:33] <ASULutzy> Lorenzo: I'm not familiar with that specific adapter, one sec, I'll see if I can find anything... Google is probably your friend here
[18:33] <dougiel> farf, exactly the same card here - I'd do the install
[18:33] <farf> thats what i clicked the last time and it took me to that ubuntu@ubuntu prompt and stopped loading
[18:33] <ytoox> this is useless
[18:34] <ytoox> I haven't had one question answered here since I installed ubuntu
[18:34] <ytoox> later
[18:34] <ytoox> :(
[18:34] <plytheman> ytoox
[18:34] <plytheman> oops
[18:34] <ASULutzy> Lorenzo: It's a mouse right?
[18:34] <dougiel> farf, ok the select the try - there is an install option from the live boot
[18:34] <gerob> ASULutzy: Thanks, I will let you know if I have any more questions regarding the setup.
[18:35] <BCampbell> don't think ytoox ever asked a question
[18:35] <dougiel> BCampbell, no - not one that made sense
[18:35] <ichbinesderelch> just question like "using atheros card and internet doin crazy things" so very specific :P
[18:35] <farf> waiting for it to load...
[18:35] <Lorenzo> ASULutzy -- I grabbed the wrong adapter.  Don't I feel stupid.  Hold on a second.
[18:35] <dougiel> farf, k
[18:35] <plytheman> can someone help me with some permissions issues?  I'm running a .sh to install Neverwinter Nights and it won't let me write to where it has to be installed
[18:36] <plytheman> I set the folder privleges to all read/write
[18:36] <plytheman> but no luck
[18:36] <BCampbell> plytheman, running as root?  try "sudo sh <script>"
[18:36] <ichbinesderelch> plytheman: how did you set the permissions for the install location?
[18:36] <gerob> ASULutzy:  How do I get the icon bar along the bottom like I have seen in some UI's?  I can't find an option for it in the settings manager
[18:37] <Krstnsn> heres a crazy question... is there anyway to use a 1gig SD card as some sort of ram type deal?
[18:37] <farf> ok, so im back in booted from the live cd, just go ahead and do the install through here?
[18:37] <plytheman> ichbinesderelch: I ran nautilus as root and set it through the properties dialog
[18:37] <gofg> gerob, right click on the bar, unlock, drag to bottom?
[18:37] <dougiel> Krstnsn, too slow but yes
[18:37] <Krstnsn> so its not worth it?
[18:37] <BCampbell> farf, that's what i would do...but would grab a beer or two first
[18:37] <ichbinesderelch> plytheman: where do you want to install it to?
[18:37] <dougiel> Krstnsn, I would say no
[18:37] <plytheman> ﻿/usr/local/games/nwn
[18:37] <farf> lol way ahead of you
[18:37] <Krstnsn> k thanks
[18:37] <plytheman> i tried running the .sh as sudo and it didn't help
[18:38] <Krstnsn> i just had an extra microsd laying around
[18:38] <protocol1> my system said gave me a message saying the defaults for my power manager might have not been installed correctly........there a way to fix this?
[18:38] <ichbinesderelch> plytheman: just do a "sudo chown -R youruser /usr/local/games/"
[18:38] <gerob> gofg: no I mean the nice looking bar
[18:38] <henriquelm> Hello there
[18:38] <ichbinesderelch> plytheman: will change the owner of the folder to your login name
[18:38] <bruenig> !hello | henriquelm
[18:38] <plytheman> ichbinesderelch: I'll try that now, thanks
[18:38] <dougiel> farf, ok - so you are installing ok now?
[18:39] <henriquelm> Which package do u guys preffer por virtualization, Xen or Qemu?
[18:39] <bruenig> virtualbox
[18:39] <fearlessdawg> neither virtualbox for me :D
[18:39] <ichbinesderelch> +1 for virtualbox
[18:39] <lk> where can I find the source for hardy heron root file system (NOT the kernel)
[18:39] <Siph0n> why not VMWare?
[18:39] <farf> k, its checking the partitions and whatnot
[18:39] <henriquelm> lol, ok
[18:39] <nyaa> I went with virtualbox, only thing that bothered me was that I can't drag and drop between os's, but it was much faster than vmware
[18:39] <henriquelm> Will try virtualbox then!
[18:40] <supabunny> VirtualBOX rules
[18:40] <protocol1> anyone know the name of the power manager packages  for ubuntu?
[18:40] <fearlessdawg> i use virtualbox cause its so easy, works and stable
[18:40] <supabunny> it works smoothly on my xp box :D
[18:40] <plytheman> ichbinesderelch: still not working.  should the chown command have given me a success message? I saw nothing
[18:40] <shubbar> elfgoh, any luck?
[18:40] <sexcopter> hi there, how can i determine which graphics driver is currently in use, in intrepid?
[18:41] <fearlessdawg> plytheman use the CLI to install you might get some better idea of whats going on
[18:41] <fearlessdawg> whats the exact error message?
[18:41] <ichbinesderelch> plytheman: nope just no output, do a "ls -l /usr/local/games" and post the output
[18:41] <gerob> !compiz
[18:41] <Rezzie> Anyone here offer some help with bootchart please?
[18:41] <dougiel> farf, I am going for a smoke - lemme know when it is installed... I would recomend the point and click method to install nvidia drivers before you edit (fux it up) you xorg.conf... and see if that works and if not do the manual install of drivers before xorg.conf gets messed.
[18:41] <plytheman> ﻿ls -l /usr/local/games
[18:41] <plytheman> oops, one sec
[18:42] <plytheman>  ls -l /usr/local/games
[18:42] <plytheman> total 0
[18:42] <plytheman> -rw-r--r-- 1 plytheman root 0 2009-01-20 13:40 nwn
[18:42] <praaaf> sziasztok
[18:42] <fearlessdawg> the folder is only readable not writable thats the problem
[18:42] <farf> its taking a lot longer this time around....how can i tell if its wiping the partition and redoing everything?
[18:42] <ASULutzy> sexcopter: the best way I know of checking is using a little script I found (I'm sure there's a better way, but xorg.conf isn't exactly useful for it anymore) just do wget http://blogage.de/files/9124/download -O compiz-check && chmod +x ./compiz-check && ./compiz-check
[18:42] <fearlessdawg> chmod 777  and set the lot to rwx
[18:42] <dougiel> farf, is it copying files yet?
[18:42] <praaaf> vannak itt magyarok is?
[18:43] <supabunny> hey how do we change RUNLEVEL again?
[18:43] <darthanubis> ubuntu forgot to notice my Windows XP install and did not put the option for the other OS in grub. Is there an easy way for correcting this?
[18:43] <farf> resizing partition
[18:43] <ichbinesderelch> plytheman: fearlessdawgs method, sudo chmod -R 777 /usr/local/games/
[18:43] <BCampbell> farf, if i remember there is no real status on partition magement..just have to wait until the copying files comes up
[18:43] <farf> for like 5 minutes
[18:43] <shubbar> i am getting an error with F-Stop when coping pictures from SD card
[18:43] <dougiel> farf, it should have told you it was partitioning and formating
[18:43] <magentar> is there a configuration file for key code mappings ? i have some unmapped keycodes showing up in dmesg and i want to assign them to key codes using setkeycodes
[18:43] <ASULutzy> plytheman: that needs to be a folder, and it's not
[18:43] <farf> ya it didnt, just that it was resizing the partition
[18:43] <shubbar> F-Stop error: An unhandled exception was thrown: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
[18:43] <ASULutzy> plytheman: folders are marked with d and are executable. You have a file called nwn?
[18:43] <energY> How do I increase the volume in the command line?
[18:43] <ASULutzy> plytheman: You sure you don't want that to be a folder?
[18:43] <farf> can i stop it?
[18:43] <ASULutzy> energY: alsamixer works
[18:43] <farf> its been at 50% for like 5 min
[18:44] <dougiel> farf, you left it at default install options?
[18:44] <BCampbell> farf, what partiton option did you choose?
[18:44] <protocol1> there a place where I can post this error....its too bigfor this chat?
[18:44] <farf> the default one, guided
[18:44] <ASULutzy> !paste | protocol1
[18:44] <farf> shoulda done manual eh?
[18:44] <shubbar> but i copied the pictures directly to my hd without any errors, it just comes with f-stop
[18:44] <dougiel> farf you need to use entire disk if there is nothing else on it
[18:44] <plytheman> ASULutzy: i don't know why its not a folder or where the 'nwn' came from, I'm assuming thats as far as the .sh got in the installation
[18:44] <BCampbell> farf, not really only one physical drive in the machine?
[18:44] <farf> oh
[18:44] <farf> lol
[18:44] <nyaa> farf resizing can take a while
[18:44] <farf> wellll then ill do that
[18:44] <farf> nah got 2 drives
[18:45] <farf> 80g and 160
[18:45] <nyaa> farf if you set it oddly before and are now setting it manually, I really would just give it some time, your drive will look better at the end heh
[18:45] <BCampbell> which is the target drive?
[18:45] <starkmjolk> eavning
[18:45] <zamba> what's the best and easiest way of rolling out a large number of modified installations of ubuntu?
[18:45] <farf> 80g
[18:45] <ASULutzy> plytheman: You could always paste the .sh file to a pastebin and we could look through it for some sanity checking
[18:45] <protocol1> there a way I can get this fixed?  http://paste.ubuntu.com/107414/
[18:45] <dougiel> farf, cancel the install and start again - no need to reboot tho
[18:45] <zamba> i'm thinking something based on pxeboot?
[18:45] <shubbar> sometime i feel i m in a very crowded market here
[18:46] <farf> dont think its gonna let me stop the resizing
[18:46] <plytheman> ASULutzy:  I got it from a huge thread in Ubuntu forums, didn't see anyone with my problem tho
[18:46] <farf> should i reboot the machine or can that damage it?
[18:46] <BCampbell> shubbar, yes it is... and the beer line is the longest
[18:46] <plytheman> ASULutzy: so I think its something on my end
[18:46] <nyaa> farf or if you do it manually, delete all the old partitions so you don't have to resize
[18:46] <supabunny> how do we change what runlevel we are using?
[18:46] <supabunny> i forgot =D
[18:46] <ASULutzy> plytheman: What is the specific error that you get when you run the script?
[18:46] <farf> ya i want to delete the old partition, and then ill use entire disk?
[18:46] <dougiel> farf, it should be able to be cancelled
[18:46] <starkmjolk> I've accedently overwritten my partition table using freebsd fdisk. now I want to recover my ubuntu system so I can start over
[18:46] <starkmjolk> found some info on the net on how to do this, and the tool gpart
[18:46] <mossmon> Hi! i would make animations like i have a picture and then i move it on frames. That application should be free. Can anyone help me?
[18:47] <KillerOrca> I seem to have lost the ability to get a screen resolution, just booted up and it defaulted to 800X600, have no idea what to do
[18:47] <farf> its resising the partition, only gives me option to minimize it
[18:47] <BCampbell> dougiel, it may take a while to stop in a resize operations
[18:47] <shubbar> where's the best place for a newbie to get a solution to a problem?
[18:47] <starkmjolk> I haven't written anything to the disk after the loss of the partition table, so hopefully everything is fine
[18:47] <ASULutzy> shubbar: Here, or on the forums
[18:47] <farf> is it a bad idea to hard reboot the machine while its resizing?
[18:47] <fearlessdawg> farf probably
[18:47] <farf> ahh there we go, finished
[18:47] <BCampbell> shubbar, usually here but we are volunteers, so it may take some time to answer you
[18:47] <ichbinesderelch> KillerOrca: what graphic card do you have?
[18:47] <nyaa> hurray
[18:48] <mossmon> ubottu
[18:48] <farf> ok, restarting the install
[18:48] <starkmjolk> my question is, how do I calculate the values to use in fdisk from the output of gpart?
[18:48] <CrownAmbassador> Hi guys. How do I check what network card I have on my laptop?
[18:48] <Lorenzo> Okay, so what I actually have is Linksys USB200m network adapter.
[18:48] <valued_customer> Lemme try this again. Were can I find the "video=" option for the Live CD boot menu? Default and safe both give out of range errors.
[18:48] <dougiel> CrownAmbassador, lspci
[18:48] <KillerOrca> ichbinesderelch: none, just an intergrated one, I used to be able to select more than 2 resolutions
[18:48] <CrownAmbassador> dougiel: okay thanks!
[18:49] <dougiel> CrownAmbassador, yw
[18:49] <farf> ok, dougiel, i want to use the entire disk?  i just deleted the partition
[18:49] <ichbinesderelch> KillerOrca: changed anything in xorg.conf? maybe past it
[18:49] <ActionParsnip> yo yo yo
[18:49] <dougiel> farf, correct
[18:49] <energY> 64mb, 133mhz, I want to stream radio. Possible?
[18:49] <Rezzie> Is the bootchart web renderer down, and if so how can I render my bootchart.tgz log (offline or alternative renderers)? I have tried using a web browser and curl for online, and "java -jar bootchart.jar" and "java -cp bootchart.jar org.bootchart.Main" locally but neither work for offline rendering.
[18:49] <dougiel> farf, were you asking or telling?
[18:50] <ActionParsnip> energY: use xubuntu
[18:50] <lk> please, can someone tell me where to find source code for the command tee.c
[18:50] <Lorenzo> ASULutzy -- I don't know why I grabbed the wireless mouse adapter.  Anyhow, it's a Linksys USB200M wireless adapter.
[18:50] <mossmon> Hi! i would make animations like i have a picture and then i move it on frames. That application should be free. Can anyone help me
[18:50] <farf> lol telling, just letting you know i deleted the old partitions
[18:50] <farf> its formatting the partitions now and puting ext3 on
[18:50] <ActionParsnip> lk: try: sudo apt-get install apt-file; sudo apt-file update; sudo apt-file search tee.c
[18:50] <KillerOrca> ichbinesderelch: nope, the last time I booted I just ran ushare, powered down and haven't done anything since now, doing an update so maybe that will do it
[18:51] <lk> thanks actionparsnip
[18:51] <fearlessdawg> ﻿mossmon: use GAP for GIMP i believe
[18:51] <ichbinesderelch> KillerOrca: you could paste your xorg.conf so we could take a look at it
[18:51] <dougiel> farf, good to go = can I go for a smoke now ?
[18:51] <dougiel> :)
[18:51] <KillerOrca> mossmon: try blender?
[18:51] <farf> lol no!
[18:51] <KillerOrca> ichbinesderelch: where is the file located again? /etc/usr/xorg?
[18:52] <farf> it might mess up while you're gone
[18:52] <farf> and then ill have a stroke
[18:52] <fearlessdawg> :)
[18:52] <ichbinesderelch> KillerOrca: /etc/X11/xorg.conf
[18:52] <mossmon> i tried blender and its too hard for me. also gimp makes dizzy
[18:52] <Gatonegro> Hello all. I'm trying to add emblems to the iconset I am using, but despite I add them to $HOME/.icons/XubuntuStudio/scalable/emblems , they don't appear in the list of available emblems.
[18:52] <Gatonegro> Any ideas?
[18:52] <dougiel> farf, lol -  brb... I gotta return some phone calls, see you in a bit.
[18:52] <ASULutzy> Lorenzo: Hmmm, what is the output of dmesg when you plug in the adapter? also, doing sudo modprobe usbnet && sudo modprobe axnet_cs might help
[18:52] <farf> kk
[18:52] <tv7497> guys guys my audio output is horrible changed my system a week back with new speakers of course it worked very very very well in windows (media centre) it took me two days again to get back all my collection into my pc from my dvd's and the sound output from amarok is omg horrible my bass and treble of my speakers must be very very low or else the voice and beats dosent sync whats the problem should i change my speakers?
[18:52] <ASULutzy> Lorenzo: check ifconfig, see if it creates a device called usb0
[18:53] <plytheman> ASULutzy: /games/nwn is owned by me and all permissions but the installer still isn't working
[18:53] <ASULutzy> plytheman: What is the error now?
[18:53] <fearlessdawg> mossmon: just google linux animation packages sure there is something you will like
[18:53] <Lorenzo> ASULutzy -- there is no usb0
[18:53] <dennda> With a fresh ubuntu install on my XPS M1330 from Dell: Why does the built-in microphone not work? I cannot even select another input source in the volume control panel
[18:53] <plytheman> ASULutzy: same thing,
[18:53] <mossmon> okay i will try
[18:53] <ASULutzy> Lorenzo: paste the output of dmesg after plugging the adapter in, and also try running those two modprobe commands
[18:54] <fearlessdawg> plytheman can you paste the error you are getting and the command you are using
[18:54] <Gatonegro> mossmon, I didn't catch your question but if you are looking for animation programs try Synfig Studio.
[18:54] <plytheman> -en Enter the install directory. (/usr/local/games/nwn):
[18:54] <plytheman> /usr/local/games/nwn
[18:54] <plytheman> [: 64: ==: unexpected operator
[18:54] <plytheman> -e Possible write error
[18:54] <plytheman> -e Please try a different folder or change permissions on /usr/local/games/nwn
[18:54] <ASULutzy> plytheman: Paste the error message into a pastebin along with the output of ls -l in the folder you are trying to install to
[18:54] <ASULutzy> !paste | plytheman
[18:54] <ActionParsnip> plytheman: use pastebin for multiple lines
[18:54] <plytheman> right right, sorry
[18:54] <alesan> hey what is an audio editor? not audacity
[18:54] <ASULutzy> plytheman: paste the error to a pastebin and also paste the output of ls -l in /usr/local/games/
[18:54] <alesan> can you give me a suggestion for a wave file editor that is not audacity?
[18:55] <dreamy> good nigth room
[18:55] <unik> need some help guys
[18:55] <tv7497> guys anyone ?
[18:56] <ASULutzy> !ask | unik
[18:56] <unik> i just installed VISE, its a C64 emulator
[18:56] <Lorenzo> ASULutzy -- I just typed in all the commands.  As for the dmesg, I can't paste it as it is on the laptop and I am not able to get online with it right now.
[18:56] <unik> but i dont know where it is in the file system
[18:56] <unik> :P
[18:56] <plytheman> http://pastebin.com/d6190b874 are my errors
[18:56] <nyaa> tv7497 what was your question?  I can't find it
[18:56] <Lorenzo> ASULutzy -- is there anything specific I could retype here?
[18:57] <ASULutzy> Lorenzo: Well, just the output of dmesg | tail after plugging the adapter in would be helpful
[18:57] <tv7497> nyaa: (12:22:48  IST) tv7497: guys guys my audio output is horrible changed my system a week back with new speakers of course it worked very very very well in windows (media centre) it took me two days again to get back all my collection into my pc from my dvd's and the sound output from amarok is omg horrible my bass and treble of my speakers must be very very low or else the voice and beats dosent sync whats the problem should i change my speakers?
[18:57] <fearlessdawg> plytheman: you could try this link - seems other people have had this error - seems like it is a issue with DASH whatever that is - but if you read down about halfway you will see the solution - http://ubuntuforums.org/archive/index.php/t-113259.html
[18:57] <ASULutzy> plytheman: Weird,
[18:58] <Lorenzo> ASULutzy -- that also is pages long.
[18:58] <plytheman> fearlessdawg: reading now, thanks
[18:58] <nyaa> tv7497 I sent you a message, easier to troubleshoot without scrolling up heh =)
[18:58] <christian_> hello
[18:58] <pt|Zool> hi all
[18:58] <christian_> i need help with my ubuntu 8.10
[18:58] <ActionParsnip> tv7497: use the amarok settings to set EQ amarok to your liking
[18:58] <ASULutzy> Lorenzo: lol, well sorry, I'm not psychic, it's tough for me to help with no information
[18:58] <zamba> i need something to clone my ubuntu installation
[18:58] <ActionParsnip> !ask | christian_
[18:58] <dreamy> hi ActionParsnip :)
[18:58] <dennda> nvm
[18:59] <christian_> i have a ubuntu 8.10 with kernel 2.6.27-9-generic
[18:59] <ActionParsnip> dreamy: howdy
[18:59] <ASULutzy> unik: use locate or which
[18:59] <dreamy> good ty
[18:59] <christian_> when i started ubuntu it's crash
[18:59] <christian_> and i need press a key to continue...
[18:59] <christian_> it's very rarerly
[18:59] <ichbinesderelch> _all_ in _one_ line :P
[19:00] <ASULutzy> !enter | christian_
[19:00] <eseven73> unik: you'll likely have to update the 'locate' by first doing 'sudo updatedb' then 'locate VISO'
[19:01] <eseven73> errr VISE
[19:01] <plytheman> fearlessdawg: I think the dash deal is only for edgy, I'm running hardy
[19:01] <BCampbell> farf, how's it going this time?
[19:01] <Gatonegro> I'm trying to add emblems to the iconset I am using, but despite I add them to $HOME/.icons/XubuntuStudio/scalable/emblems , they don't appear in the list of available emblems. Any hints?
[19:01] <ActionParsnip> christian_: are you fully updated?
[19:02] <gpled> what is a quick way to list your dhcp servers from console?
[19:03] <vigo> Do I have to mount the floppy drive on this box?
[19:03] <supabunny> ifconfig?
[19:03] <fearlessdawg> plytheman: if i was you I would google your error message and ur sure to find a solution. will keep having a look for you though
[19:03] <christian_> ok, sorry. i have ubuntu 8.10 with kernel 2.6.27-9 kernel in my laptop hp pavilion dv6748us with chipset nvidia. my problem is when i power on my laptop, ubuntu hangs until i press a button. from there.. all is normal... i'm sorry for my bad english
[19:04] <christian_> \join #ubuntu-es
[19:04] <ASULutzy> plytheman: The script must not be coded correctly, the directory is definitely writable, could always paste the script to a pastebin and we could take a look
[19:04] <dreamy> the utah glx project .. is that thing sweet or what?
[19:04] <energY> Hello
[19:04] <BCampbell> don't think ifconfig lists dhcp servers
[19:04] <ActionParsnip> christian_: try making the bootsplash not show so you can watch the bootup
[19:04] <energY> I need to send my webcam live from my ubuntu server
[19:04] <energY> How?
[19:04] <plytheman> ASULutzy: I'll google the error message first, if I don't find anything I'll pastebin it
[19:04] <Krstnsn> so since i got up this morning. my laptop is running super slow. even with no applications open. Is there anything i can check or do to speed this badboy back up?
[19:05] <eseven73> christian_: u have good english as long as u dont say u and ur for 'you' and 'you're' ur doing alright ;)
[19:05] <christian_> ActionParsnip but with kernel 2.6.24, i don't have problem
[19:05] <htnguyen> Hey, I am having a problem printing photos in f-spot. The print option is greyed out and I cannot open a print dialog. I can, however change page settings. Any ideas why?
[19:05] <fearlessdawg> ﻿plytheman: have you read this thread http://ubuntuforums.org/showthread.php?t=113259&page=35
[19:05] <lonel> hi on starting bridge interface with ubuntu..all network goes down
[19:05] <lonel> any idea why is that
[19:05] <ASULutzy> Krstnsn: check top for what's hogging up your resources maybe, also free -m output would be useful, and also installing iotop and checking that could show the culprit
[19:06] <plytheman> fearlessdawg: I've been in that thread, not that far up though... reading now, thanks
[19:06] <christian_> ActionParsnip in the bootup doesn't show any important information to detect the error..
[19:06] <ActionParsnip> christian_: thats a hardy kernel, i'd watch the bootup
[19:07] <ActionParsnip> christian_: or try dmesg | less
[19:07] <Krstnsn> ASULutzy, whats top?
[19:07] <fearlessdawg> lists the top process currently running
[19:07] <ASULutzy> Krstnsn: top is like a system monitor from command line
[19:07] <ASULutzy> can always type man top to learn more
[19:08] <fearlessdawg> CTRL-C to quit it once its runnning (i think)
[19:08] <christian_> ActionParsnip do you have view the output of dmesg |less?
[19:08] <mikebeecham> can anyone recommend a good process to convert vob files to avi?
[19:08] <ASULutzy> fearlessdawg, Krstnsn: a simple 'q' works, no need to ctrl+c
[19:08] <Krstnsn> aw
[19:08] <hume> i am creating USB startup disk with the application in System - Administration, using a 4 GB USB stick and a 8.10 iso file - but the USB stick wont boot - anyone can help?
[19:08] <Krstnsn> ASULutzy, its an app that i just upgraded to. but its not actually running
[19:08] <christian_> ActionParsnip in 5 minutes return
[19:08] <Krstnsn> or atleast the GUI isnt running.
[19:08] <fearlessdawg> thanks for the tip ﻿ASULutzy
[19:09] <ASULutzy> Krstnsn: if top says it's running, it's running
[19:09] <adac> Which package do I have to install for the ssh server on ubuntu server edition?
[19:09] <Krstnsn> is there a way to kill it?
[19:09] <lk> ActionParsnip: sudo apt-file search tee.c gives me the following
[19:09] <lk> bash-builtins: /usr/share/doc/bash/examples/loadables/tee.c
[19:09] <lk> dosemu: /usr/lib/dosemu/drive_z/bin/tee.com
[19:09] <lk> libxmlrpc-c3-dev: /usr/share/doc/libxmlrpc-c3-dev/examples/xmlrpc_server_validatee.c.gz
[19:09] <lk> So from where do I download tee.c source code?
[19:09] <fearlessdawg> kill -9 <PID of process>
[19:09] <ASULutzy> Krstnsn: pkill nameOfProcess, or alternatively do ps ax | grep nameOfProcess to get the pid, and then do kill pid
[19:09] <ASULutzy> Krstnsn: Don't run what fearlessdawg said
[19:09] <fearlessdawg> :O why not?
[19:09] <ASULutzy> fearlessdawg: DO NOT tell people to use kill -9
[19:10] <ActionParsnip> lk: libxmlrpc-c3-dev: like it tells you
[19:10] <fearlessdawg> ASULutzy how come?
[19:10] <ASULutzy> fearlessdawg: Because, kill -9 is a sledgehammer for something that may only require a small nudge
[19:10] <ASULutzy> fearlessdawg: feel free to review man kill, but sending a process the KILL signal doesn't allow it to cleanup and die gracefully
[19:10] <ASULutzy> fearlessdawg: You want to try to send it TERM first
[19:11] <Krstnsn> as soon as i type "p" it says unknown command
[19:11] <bultiz> hey
[19:11] <ASULutzy> fearlessdawg, Krstnsn: Basically, kill pid tells the process to cleanup and die gracefully, kill -9 just shoots it in the face.
[19:11] <ASULutzy> Krstnsn: push 'q' to get out of top
[19:11] <ASULutzy> Krstnsn: then do pkill or kill
[19:12] <Krstnsn> and then pid?
[19:12] <Krstnsn> the
[19:12] <ASULutzy> Krstnsn: pkill pidgin would kill pidgin
[19:12] <bultiz> i got a LITTLE problem, when i touch my taskbar/menubar all my windows minimize alt. maximize, what do i do? its getting really annoying xD ubuntu 8.10
[19:12] <ASULutzy> ps ax | grep pidgin would show all processes which have pidgin in the name
[19:12] <Krstnsn> nice thanks
[19:13] <Krstnsn> too bad firefox is using 30% of my cpu on its own
[19:13] <ActionParsnip> Krstnsn: or: killall pidgin
[19:13] <zoyt> Добрый вечер!
[19:13] <ActionParsnip> Krstnsn: try swiftfox or firepup
[19:13] <ASULutzy> Krstnsn: firefox and flash don't play very nicely together, and yes, there is killall, I just like to check first with ps ax
[19:13] <Krstnsn> it was the new deluge. it was running my cpu at 80% and then FF was using what was left
[19:13] <ASULutzy> !ru | zoyt
[19:13] <ActionParsnip> ASULutzy: ps -ef is the linux standard, ax is the bsd standard
[19:14] <Krstnsn> now i know why the deluge in the repos is not the new one
[19:14] <ASULutzy> ActionParsnip: My bad, it works :P
[19:14] <Krstnsn> =]
[19:14] <farf> is it supposed to take a long time for it to install drivers through admin -> hardware drivers???
[19:14] <ActionParsnip> ASULutzy: true, just a bit of info
[19:14] <bultiz> i got a LITTLE problem, when i touch my taskbar/menubar all my windows minimize alt. maximize, what do i do? its getting really annoying xD ubuntu 8.10
[19:14] <zamba> is it possible to install add-ons for firefox like flashblock and adblock through apt?
[19:14] <ASULutzy> ActionParsnip: Appreciate it, guess I'll check the man
[19:14]  * ActionParsnip likes to be standard
[19:14] <BCampbell> later all.....work calls (bummer)
[19:14] <KillerOrca> ichbinesderelch: I cannot seem to open the file in xedit, what is the full path?
[19:14] <valued_customer> One last time: were can I find the "video=" option for the Live CD boot menu? Default and safe both give out of range error
[19:14] <fearlessdawg> Krstnsn you us adblockplus? bit offtopic but i found if you running flash it sure helps, no more flash ads so not as sluggish with a few pages open
[19:14]  * ASULutzy doesn't like having to type an extra character ;)
[19:15] <plytheman> Okay, I found a different .sh that so far seems to be working much better...
[19:15] <plytheman> thanks for the help guys =D
[19:15] <fearlessdawg> plytheman: yw
[19:15] <Krstnsn> ya i am
[19:15] <bultiz> i got a LITTLE problem, when i touch my taskbar/menubar all my windows minimize alt. maximize, what do i do? its getting really annoying xD ubuntu 8.10
[19:15] <ichbinesderelch> KillerOrca: hte xorg.conf? /etc/X11/xorg.conf
[19:15] <zoyt> Добрый вечер!
[19:16] <plytheman> I'll stick around and try to answer a question, but I doubt I'll know much =P
[19:16] <bultiz> no1 knows ? i got free cióokies for the one who knows
[19:16] <severb> Hello, does anyone knows what xml files gnome-keyboard-properties uses to display the layout list?
[19:16] <lk> ActionParsnip: in general, where can I find the source code for the ubuntu distribution or root file system. I need the source code for several commands
[19:16] <ASULutzy> !ru > zoyt
[19:16] <ichbinesderelch> plytheman: if you have 1 ubuntu system and add another one, how many do you have then? :P
[19:17] <CaneToad> hmm, all the MP3s from http://www.juneberry78s.com/sounds/ListenToBlackGospel.htm don't play properly with totem or rhythmbox under ubuntu 8.10, though mplayer plays them fine.  What package should I create a bug report on?
[19:17] <plytheman> uhhh.... 2?
[19:17] <nikkeee> hi... I was wondering if anyone has any idea why evolution opens every time I plug the power cable into my laptop
[19:17] <ichbinesderelch> plytheman: thanksf or the answer!
[19:17] <cumulus007> hi, I'm getting this error:
[19:17] <cumulus007> Package linux-image-2.6.17-11-generic needs to be re-installed, but no package archive could be found
[19:17] <plytheman> hahaha
[19:17] <farf> hmmmmmmmmm
[19:17] <PC-AwayLetter> hello ubuntuans!
[19:17] <plytheman> i wasn't sure what kind of trick question that was
[19:17] <dougiel> farf, what's up?
[19:17] <ActionParsnip> lk: you can install source deb files to get the source code
[19:17] <cumulus007> I want to stop this package from installing, it prevents me from upgrading Ubuntu to 8.04
[19:17] <redvamp128> okay here is one for you-- not a big issue though-- I have firefox set to download to a select folder- the file is a .iso and it does that beautiful-- though for some reason Ubuntu wants to create a folder on my desktop with that .iso file in it-- (does ubuntu automount iso images?)
[19:17] <Donfuria> how coincidental, I'm getting the same error as cumulus007
[19:17] <ActionParsnip> lk: try: apt-cache search source
[19:17] <Mortuis> How do I tell via aptitude if a package is installed?
[19:17] <ichbinesderelch> plytheman: just a "make you  happy to be able to answer someone"-questioN ;)
[19:17] <PCLoadLetter> I have 8.1, and about 3/4 of the way through myapt-get java install, my connection dropped and some dependencies got screwed up, so i did the -f thing to remove and repair the dependencies and it automatically said everything installed right
[19:18] <jrib> cumulus007: is that your current kernel?
[19:18] <cumulus007> lol :P
[19:18] <KillerOrca> ichbinesderelch: is there some kind of copy/paste command for xedit, I have it open but I can't copy it over
[19:18] <jrib> Mortuis: use 'apt-cache policy PACKAGE'
[19:18] <cumulus007> jrib, it's not mines, it's the kernel of Donfuria
[19:18]  * Donfuria waves
[19:18] <dougiel> farf, you still here?
[19:18]  * jrib is confused
[19:18] <redvamp128> try using sudo gedit -- then open your file-- it could be protected
[19:18] <Mortuis> jrib: thanks
[19:18] <farf> lol ya im here
[19:18] <cumulus007> he is using Ubuntu 7.04, which is quite outdated. He wants to upgrade to a newer version, but this error message prevents the system from any package operation
[19:18] <PCLoadLetter> even though some of the packages didnt install properly.. the problem is, all of my .jar files are saying they're corrupt, no matter which one i try to open with java -jar
[19:19] <ichbinesderelch> KillerOrca: there is a package called pastebinit, install it and than run it with the file  to paste xorg in a pastebin
[19:19] <jrib> Donfuria: what is your current kernel?
[19:19] <farf> actually got into desktop w/o having to do anything new, and it installed the driver through the normal way..but now when i restart ive got a screen to select which os i want, never had that one before?
[19:19] <Donfuria> ehm cumulus007, wat is mijn huidige kernel
[19:19] <Donfuria> feisty
[19:19] <Donfuria> 7.04?
[19:19] <cumulus007> it's uname -a
[19:19] <PCLoadLetter> i try to do the sudo apt-get install java, and it says all my packages are up to date
[19:19] <dougiel> farf, cool = so all is good?
[19:20] <simplexio> PCLoadLetter: for future use learn howto use 'screen'. howto reinstall no package, no idea, you could try remove / install
[19:20] <PCLoadLetter> i also try to do java -version, and the corrent runtimes are showing up
[19:20] <farf> ya, is there anyway to get rid of that screen? or is it normal for it to be there
[19:20] <Donfuria> 2.6.20-16-generic is my current kernel
[19:20] <Donfuria> so no
[19:20] <jrib> farf: normal.  You can make it not show up by editing /boot/grub/menu.lst though
[19:20] <dougiel> farf, are you talking about grub menu?
[19:20] <christian_> ActionPasnip i send an output of dmesg | less
[19:20] <PCLoadLetter> simplexio:  I'm new to ubuntu.. what's screen about?
[19:20] <farf> i think so
[19:20] <Donfuria> jrib, it's not
[19:20] <lfaraone> how do I check a device's vol_id?
[19:20] <dougiel> it is supposed to be there...
[19:20] <jrib> !uuid | lfaraone
[19:20] <fearlessdawg> to reinstall it's apt-get --reinstall install isn't it?
[19:20] <farf> to edit it, do i just sudo nano /boot/grub/menu.lst?
[19:21] <severb> Hello, does anyone knows what xml files gnome-keyboard-properties uses to display the layout list?
[19:21] <lfaraone> jrib: thanks.
[19:21] <dougiel> farf, you will want that there... yes that is to edit the list
[19:21] <jrib> farf: sure, or use gedit...
[19:21] <farf> lol kk, awesome, dougiel you're friggin awesome, i really appreciate all the help today, couldnt have done it w/o you
[19:22] <dougiel> farf, when you system updates your kernel you will have an option there to boot the new (default) or the old fer when things get messed - lol
[19:22] <KillerOrca> ichbinesderelch: wow, convienient
[19:22] <chrismnh> how do you mount a .iso on ubuntu?
[19:22] <farf> i think ill save trying to install the themes and whatnot for a diff day
[19:22] <m0los> When I use the "mv" command in the terminal, is it possible to see the progress?
[19:22] <m0los> In %
[19:22] <dougiel> farf, do you like the mac?
[19:22] <jrib> m0los: no
[19:22] <jrib> !iso | chrismnh
[19:22] <m0los> jrib: Just have to wait?
[19:22] <BrokenClockwork1> Hey I am installing Ubuntu for the first time, but I've got thrown to the initramfs console, what can I do?
[19:22] <PCLoadLetter> here's a simpler question.. if i nx into my ubuntu freenx server using the admin login, can I still use the terminal and everything else in ubuntu without issues?
[19:22] <jrib> m0los: yes
[19:22] <plytheman> chrismnh: look for gmount, works well for me
[19:22] <m0los> jrib: Uncool
[19:22] <savvas> m0los: use "mv -v" or use rsync command
[19:22] <farf> not in particular, havnt really used them overmuch since they were always so limited w/ gaming
[19:22] <ActionParsnip> BrokenClockwork1: log in then run: startx
[19:23] <BrokenClockwork1> so enter startx?
[19:23] <chrismnh> ty
[19:23] <m0los> savvas: Just mv -v and then just like the ordinary mv ?
[19:23] <ichbinesderelch> KillerOrca: jup, pretty neat :)
[19:23] <PCLoadLetter> !screen | PCLoadLetter
[19:23] <jrib> Donfuria: where is that other kernel from?  Was that in feisty?
[19:23] <Donfuria> I'm in feisty now, jrib
[19:23] <Donfuria> so the current kernel would be feisty
[19:23] <jrib> Donfuria: right
[19:24] <savvas> m0los: yes, it will show you what is being done in the background, you won't get an estimation of when it will be done, nor the total number of files
[19:24] <jrib> Donfuria: you can use --force-remove-reinstreq with dpkg to remove the other kernel package.  Or find the deb for it somewhere and reinstall it first then remove it
[19:25] <m0los> savvas: Ok thx
[19:25] <KillerOrca> ichbinesderelch: ok here it is, I hope http://pastebin.com/f2798d71c
[19:26] <christian_> gente tengo un problema con ubuntu 8.10, kernel 2.6.27-9., cuando inicia ubuntu es como que se cuelga..
[19:26] <redvamp128> KillerOrca:  I use Acetone to mount an Iso image-- personally from GetDeb--
[19:26] <jrib> !es | christian_
[19:27] <savvas> m0los there was a progress patch in gentoo, I'm not sure if there's a request for it for ubuntu
[19:27] <redvamp128> KillerOrca:  oops AcetoneISO2
[19:27] <KillerOrca> redvamp128: mounting an ISO is not my issue, message for someone else perhaps?
[19:28] <biouser> has anyone bee able to 'join audio'
[19:28] <biouser> on Twiddla
[19:28] <biouser> ?
[19:28] <ichbinesderelch> KillerOrca: what version of ubuntu are you using?
[19:28] <biouser> http://www.twiddla.com/skyl-algebra
[19:29] <biouser> if someone could join that room and try to join audio... I have someone on OSX that can talk back
[19:29] <Dreamglider> is it easy to get a midi keyboard to work with ubuntu ?
[19:29] <andatche> anyone any idea how to fix a package with this error? -> current status `triggers-awaited' with no pending triggers
[19:30] <andatche> stuck with both cups and xterm packages in this state
[19:30] <biouser> Dreamglider not that bad, might take a good day to get it set-up the way you want
[19:30] <KillerOrca> ichbinesderelch: did the link work?
[19:30] <tr3nd> hi, Xorg is using 20% CPU usage, what is wrong?
[19:30] <jseamus> energY: jesus is better than dead
[19:30] <ichbinesderelch> KillerOrca: jup, but what version of ubuntu are you using?
[19:30] <biouser> twiddla crashed somebody here?
[19:30] <ushills> how do i go about getting my desktop to use the 8.10 layout after a dist-upgrade, my running man is in the wrong place
[19:31] <mikebeecham> is there a way to convert vob files to avi within Linux?
[19:31] <KillerOrca> ichbinesderelch: I believe it is the latest LTS 8.04
[19:31] <Dreamglider> biouser: you know what i have to do to get it working ?
[19:32] <biouser> Dreamglider not currently, I did it a year or two ago you can use jack though and a synth...
[19:32] <tr3nd> hi, Xorg is using 20% CPU usage, what is wrong? please help
[19:32] <marcelo> Hi, I do not want to match binaries in the grep search, what option should I use?
[19:32] <biouser> I used TiMidity
[19:32] <ichbinesderelch> KillerOrca: than try reconfiguring X by $ sudo dpkg-reconfigure xserver-xorg(hope i'm right with the command:) )
[19:33] <kane77> can I find out what hdd model I have with some command?
[19:33] <theczar> so... I'm having trouble with virutal hosts on my server
[19:33] <lyrae> what troubles theczar
[19:33] <plytheman> well, Neverwinter Nights is installed.... now it won't run =(
[19:33] <theczar> I installed apache and everything seemed fine until I tried setting up virtual hosts
[19:33] <plytheman> lol
[19:33] <kane77> mikebeecham, yes, either ffmpeg or mencoder
[19:33] <dougl> farf, sorry I got disconnected there - did you get all the compiz effects working?
[19:34] <ichbinesderelch> plytheman: what error?
[19:34] <theczar> it was then that I noticed my httpd.conf file was completely empty
[19:34] <lyrae> thats not good
[19:34] <Pici> theczar: use /etc/apache2/apache2.conf and /etc/apache2/sites-enabled/ and /etc/apache2/sites-available/
[19:34] <theczar> exactly, so I removed the package and tried a source install, but still nothing
[19:34] <tr3nd> Anyone know how to prevent the massive CPU usage in Ubuntu 8.10?
[19:35] <lyrae> theczar can't help you..first you need to figure out why the conf file is empty
[19:35] <TTilus> tr3nd: "the massive CPU usage"?
[19:35] <ichbinesderelch> tr3nd: turn desktop effects off maybe helps
[19:35] <KillerOrca> ichbinesderelch: I did that and went through everything, now what?
[19:35] <biouser> http://www.twiddla.com/skyl-algebra <-- 'join audio' crashes me, how about you?
[19:35] <TTilus> tr3nd: check with top
[19:35] <TTilus> tr3nd: whats consuming your cpu?
[19:35] <lyrae> mines using 8.4% cpu
[19:35] <tr3nd> TTilus, i did. it says Xorg is using 20% cpu :(
[19:35] <theczar> Pici what exactly do you mean?  I can set up virtual hosts without the httpd.conf file?
[19:35] <mikebeecham> kane77: how would I use mencoder to convert?
[19:36] <TTilus> tr3nd: oh my!
[19:36] <ichbinesderelch> KillerOrca: restart your notebook or just x (x with strg+alt+backspace)
[19:36] <Pici> theczar: Yes. Take a look at the documentation on apache.org, #apache may also be able to help.
[19:36] <apakatt> do the ubuntu netinstall make a clean install or does it download desktop stuff automatically?
[19:36] <starkmjolk> I've already asked, but anyone in here have experiense with recovering lost partition tables?
[19:36] <dougl> I am running 8.04 and when I "sudo /etc/init.d/lirc restart" I get  * Unable to load LIRC kernel modules. Verify your * selected kernel modules in /etc/lirc/hardware.conf - any suggestions?
[19:37] <lyrae> theczar what package did you install?
[19:37] <theczar> Pici, #apache is on FreeNode?
[19:37] <Pici> theczar: yes.
[19:37] <theczar> Lyrae Apache2
[19:37] <dougl> I have looked at /etc/lirc/hardware.conf but could not figer out what to do.
[19:37] <kane77> mikebeecham, http://ubuntuforums.org/archive/index.php/t-206273.html here might be something appropriate
[19:37] <KillerOrca> ichbinesderelch: umm, what is strg key?
[19:37] <clee-saan> Hi, when i plug to my computer a mp3 player or usb key or mobile phone or whatever through usb, the device says it's connected, but the computer does not do anything. It used to work, with the very same devices a few days ago but not anymore. Help ?
[19:37] <kane77> mikebeecham, other than that "man mencoder" ;)
[19:37] <lyrae> theczar you have it running now?
[19:37] <ichbinesderelch> KillerOrca: ctrl sorry, german layout ^^
[19:38] <LanUser> Hello - I'd like to install exim4 but in Intrepid I get "Package exim4 is not available"
[19:38] <KillerOrca> ichbinesderelch: np, will run it now
[19:38] <theczar> lyrae yes it's running, and my domains point to my www folder, but i can't get virtual hosts to work
[19:38] <lyrae> theczar so when you type 'localhost' in browser, it works?
[19:39] <Rencx> cinelerra no playback or sound what i cn do?
[19:39] <theczar> lyrae, yes
[19:39] <theczar> lyrae, oh crap well now it doesn't!
[19:39] <lyrae> theczar then you must be looking at the wrong config file
[19:39] <lyrae> then again maybe you are
[19:40] <lyrae> theczar remove the package, use synaptic, install again
[19:40] <lyrae> then try starting it and type localhost in your web browser and see what happens
[19:41] <poseidon> Is there a package for opera?
[19:41] <u-foka> hy there!
[19:41] <poseidon> ubottu opera
[19:42] <ravenor_> Has anybody experienced crashes in Opera? I never get it in Windows, so I assume its a Linux thing.
[19:42] <Deany> opera sounds too much like opra to me, and thats never a good thing
[19:42] <fephisto> Hello, I just got xubuntu up and running.
[19:42] <u-foka> can anyone please test addons.mozilla.org for me? I have the index page fast (maybe from my proxy cache) but search does not appear after a long waiting period :S
[19:42] <theczar> lyrae, I'll give it a shot
[19:42] <lyrae> k
[19:42] <mikebeecham> kane77: man mencoder?
[19:43] <Rencx> cinelerra no playback or sound what i cn do?
[19:44] <KillerOrca> ichbinesderelch: seems to have done the trick, thanks!
[19:44] <nejucomo> I just insalled an eclipse tarball with binaries from their website on Intrepid.  When I run it, it displays the splash screen, but the main window is blank grey with nothing in it.
[19:45] <theczar> lyrae, ok should I remove just apache2? or everything associated? is there a way to remove all dependencies automatically?
[19:45] <ichbinesderelch> KillerOrca: good to hear, seems like somehow your xorg.conf was screwed up, maybe store a copy of /etc/X11/xorg.conf in your home folder or as /etc/X11/xorg.conf.bak to easily recover this when having some error again
[19:45] <dragan> kann jemand hier deutsch
[19:45] <nejucomo> The EclipseIDE wiki page on help.ubuntu.com doesn't mention this issue.
[19:45] <Cpudan80> Hello all
[19:45] <karsten> x86_64, kubuntu, I've got flashplugin-nonfree installed but man (most?) flash animations don't play in iceweasel.  Am I missing something?
[19:45] <LanUser> Hello - I'd like to install exim4 but in Intrepid I get "Package exim4 is not available" - my sources.list seesm to be complete --> http://www.pastebin.ca/1313813
[19:46] <lyrae> theczar everything. i dont know if there's a way to remove dependencies automatically though
[19:46] <Cpudan80> Anyone hear familiar with xrandr willing to give me some help? I get a BadMatch error when trying to add an output mode
[19:46] <u-foka> theczar, maybe apt-get autoremove helps you to remove anything that not needed anymore (after apache remove, probably their dependicies :))
[19:46] <sockets> anyone in here ever install acronis on ubuntu? i have a backup image (TIB file) on an NTFS partition that i'm trying to browse through.. do i need to install windows on another partition to be able to do this? or maybe i can access the NTFS partition from virtualbox because it won't let me share it either.. anyone have an idea?
[19:46] <dragan> wie kriege ich nach der neuistallation von windows wieder den grub loader her?
[19:46] <enzotib> !de > dragan
[19:47] <marcelo> Hi, I am not able to change between channels with alt 1,2 etc. Anyone has any idea about why? Is there any other manner without having to join again?
[19:47] <dragan> ich kann leider kein englisch
[19:47] <Nomexous> !gr
[19:47] <karsten> !dr
[19:47] <karsten> !de
[19:47] <oCean_> dragan: see https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows?action=show&redirect=RestoreGrub
[19:47] <ravenor_> marcelo: Thanks for teaching me that. I've been wondering. >.> Uhm. Are you using XChat?
[19:48] <new_to_ubuntu-> hi
[19:48] <sockets> anyone here ever install acronis on ubuntu?
[19:49] <new_to_ubuntu-> my network configuration is some kind of reseted if i rebooted ubuntu
[19:51] <dragan> ok danke ich bin dan in ubuntu de
[19:51] <mrwes> ich bin ein berliner!
[19:51] <mrwes> sorry..couldn't resist
[19:52] <theczar> lyrae, u-foka, ok so I removed them (when you try to remove apache2.2-common it removes all dependencies)
[19:53] <Pici> !netsplit
[19:53] <supabunny> ouch
[19:53] <lyrae> theczar try installing apache2 and then start it.. sudo /etc/init.d/apache2 start
[19:54] <lyrae> also, theczar which ubuntu are you using?
[19:54] <theczar> lyrae 8.10
[19:55] <tr3nd>  it says Xorg is using 20% cpu :( how do i fix this?
[19:56] <theczar> lyrae ok so I'm about to reinstall apache, but before I do, i noticed that the apache files are still in my /etc folder, should I remove those before reinstalling or will the reinstallation overwrite those?
[19:56] <lyrae> theczar yep
[19:56] <lyrae> theczar remove
[19:57] <Lassmiranda> hu hu
[19:57] <theczar> lyrae, ok i'll delete them, just the contents of the /etc/apache2 folder or are there anyothers i should worry about?
[19:57] <lyrae> theczar just those should be fine.
[19:57] <Dengen> Anyone awake that maybie could help me out?
[19:58] <Lassmiranda> hey guys
[19:58] <theczar> lyrae, sudo rm -rf /etc/apache2....... and done
[19:58] <theczar> lyrae, ok i'll start the reinstallation
[19:59] <lyrae> theczar ok. but before even opening the conf file, just start apache and type localhost
[19:59] <theczar> ok
[19:59] <Dengen> p
[19:59] <Dengen> Could someone help me out with a small problem?
[20:00] <jamesrfla> Dengen: what is your problem?
[20:00] <djabbour> Does ubuntu disable the framebuffer for some reason? I don't see a /dev/fb0 and libts is complaining there is no frame buffer.
[20:00] <lyrae> theczar haha oops. i found the problem by looking at my own system's apache folder
[20:00] <theczar> lyrae ok, i tried starting it but it returned an error:  .: 44: Can't open /etc/apache2/envvars
[20:01] <tr3nd>  it says Xorg is using 20% cpu :( how do i fix this? anyone else have massive CPU usage in ubuntu 8.10?
[20:01] <Dengen> jamesrfla: I think its something with the driver to network card
[20:01] <lyrae> theczar go to /etc/apache2
[20:01] <lyrae> theczar the config file is apache2.conf, not httpd.conf
[20:02] <ravenor_> tr3nd: My Xorg uses 10-20% in 8.04. I'm fairly sure its normal.
[20:02] <theczar> lyrae, ok... well I don't have one of those now...
[20:02] <lyrae> theczar and you should have a file called envvars... if you dont i can paste it to you in a pastebin
[20:02] <ravenor_> tr3nd: if it isn't normal, somebody will have to correct me.
[20:02] <lyrae> theczar maybe you didnt install a module... let me ope synaptic and see what i have
[20:02] <tr3nd> ravenor: not even windows is using that much cpu
[20:02] <theczar> lyrae, yeah for some reason I don't have apache2.conf or envvars
[20:02] <ghostlines> what's the xorg process name? x-session-manager?
[20:04] <ravenor_> tr3nd: Maybe. I wouldn't know, I'm afriad.
[20:04] <lyrae> theczar: by typing apache2 in synaptic's quicksearch, i have apache2, apache2.2-common, apache2-mpm-prefork, apache2-utils libapr1, libaprtul1
[20:05] <fogobogo> i c u
[20:05] <lyrae> and of course libapache2-mod-php5
[20:07] <theczar> lyrae, ok for some reason I have apache2-mpm-worker instead of prefork (two conflicting packages)
[20:07] <theczar> i'll switch to prefork
[20:08] <chrismnh> anyone familiar with bchunk for making isos?
[20:08] <Deany> all i installed it apache2 and let it add what it  needs, also i install apache2-threaded-dev to compile modules.
[20:08] <lyrae> theczar alright. i highly doubt this could be the problem though....if it still doesnt work, reselect the packages and click 'reinstall'
[20:08] <djabbour> Does ubuntu support the framebuffer by default?
[20:09] <theczar> lyrae, yah no luck, i'll reinstall them
[20:10] <vigo> theczar: Did you try fix broken ?
[20:10] <lyrae> ok
[20:10] <letalis> djabbour, framebuffer console support is in the stock ubuntu kernels, but has to be enabled.
[20:10] <Hovefirse> Hiya folks. The shell command "ps fax" gives me (among others) the following line: "6908 pts/0    Tl     0:00  |           \_ ./vdr". I try to get rid of the process with "sudo kill 6908" but it refuses to go down. Any switches or heavier ammuntion I'm missing?
[20:11] <JesperHansen> Hovefirse: kill -9 6908
[20:11] <theczar> vigo, sorry, what do you mean by fix broken?
[20:12] <vigo> theczar: in Synaptic is a fix broken packages switch
[20:13] <mike12> hello
[20:13] <fephisto> How can I access files from different partitions without using a USB and restarting?
[20:13] <theczar> vigo can't see it anywhere...
[20:13] <Hovefirse> JesperHansen: Thx, that did the trick. Is that the elephant gun-version of kill?
[20:13] <vigo> theczar: It basically compares the repos with the server and replaces any missing or corrupt files,,let me look again
[20:13] <theczar> lyrae vigo, ok so I reinstalled them and still nothing...
[20:14] <dreamy> anyone? is there anything to execute that tests 3d acclelaration?
[20:14] <Ent[R]opy> What version of Python is installed on Ubuntu Server Edition 8.10?
[20:14] <the_dark_warrio> There is this wireless network on the college which ubuntu can't connect to the internet, although the wireless connect, there is no internet. Any hints?
[20:14] <lyrae> theczar http://ubuntuforums.org/showthread.php?t=471003
[20:14] <the_dark_warrio> I tried with Susi and worked well
[20:15] <theczar> Ent[R]opy it's 2.5.2
[20:15] <Ent[R]opy> Thanks
[20:15] <vigo> theczar: In Synaptic, Edit>fix
[20:15] <simplexio> Hovefirse: when you use kill pid it send signal 15, which tell program to terminate, where kill -9 send kill signal (diff is that with term signal program can try to exit nicely i think  and 9 it just dies
[20:16] <theczar> vigo, well i ran that... but it just though for a second and didn't do anything
[20:16] <Hovefirse> simplexio: OK, so we're not asking nicely, we're just slapping it around!
[20:17] <setuid> Hardy Heron used to automatically switch from wired to wireless and back, if I unplugged eth0. Now with Intrepid, it doesn't., and completely disables wireless altogether. How can I get that previous behavior back?
[20:17] <vigo> theczar: purge or uninstall and or use the backup disk that I hope you made....
[20:17] <vigo> theczar: then install fresh
[20:18] <simplexio> Hovefirse: yeah. with big stick
[20:18] <johan12> how do i remove a dir in /usr? i only get acces denied
[20:18] <johan12> tried install java earlier :S
[20:19] <theczar> vigo lyrae, ok I read the page you sent me lyrae and I purged the system of apache2
[20:19] <theczar> vigo lyrae, i'm reinstalling now
[20:19] <simplexio> johan12: umm.. you sont want move /usr/
[20:19] <lyrae> theczar last hope is a clean install :p
[20:19] <kurrata> johan12:  sudo rm -R /user/dir
[20:19] <Hovefirse> simplexio: Good - I like it!
[20:19] <johan12> i have a dir called jre1.6.0_11
[20:19] <setuid> Anyone?
[20:20] <johan12> is there any easy way installing java?:S
[20:20] <vigo> theczar: that makes sense,,,then reboot, test it and make a fresh backup when it functions
[20:20] <tsairox> hi all, trying to install ubuntu 8.10, but resolution is so big, I can't see the buttons. How can I correct this?  The rez is at like 640x800 :(
[20:20] <Deany> johan12, sudo apt-get install ubuntu-restricted-extras
[20:21] <johan12> what does it contain?
[20:21] <jimmer99> hello all - anybody seen ibex go into sleep at random intervals?
[20:21] <Deany> johan12, erm...  flashplayer, sun-java and something else
[20:21] <Deany> not sure exactly
[20:21] <simplexio> johan12: ahh.. read it wrong. command is rm -rf /usr/jre-blabla , use with care remove everything in mentione dir, if it dosent work use suo rm -rf directory
[20:21] <Deany> all stuff i want to install anyway
[20:22] <simplexio> johan12: and dont complain if you typo ite and rmeove something important
[20:22] <zamba> is it possible to point the special folder "Documents" to a different location?
[20:22] <theczar> vigo lyrae, ok no dice it's just not working
[20:23] <theczar> vigo lyrae, i'm just gonna reinstall off a backup
[20:23] <jrib> zamba: ~/.config/user-dirs.dirs
[20:23] <johan12> it worked, thx
[20:23] <zamba> jrib: cool! thanks
[20:24] <Deany> gstreamer stuff, unrar, unstripped-avcodec for ffmpeg.. too
[20:24] <lyrae> theczar ok. is your system a fresh install? id say just reinstall ubuntu if it is..takes 20m. but if you wanna get it off a back up thats ok too
[20:24] <digitalnorm> howdy.  is there a good way to see a list of apps from the command line?
[20:24] <SamIam> trying to get a usb epson stylus working, have run sane-find-scanner and it finds it, although when I run scanimage -L, No Scanner is plugged in - anyone know a solution?
[20:24] <Deany> never done me no harm...
[20:24] <zamba> jrib: but then the network share has to be previously mounted, right?
[20:24] <theczar> lyrae, yeah its a pretty new install, I don't have much to do to get back to where I am now
[20:25] <theczar> lyrae, I keep all my data on an external pterrabyte that I mount in /var, so it's no big deal
[20:25] <lyrae> theczar i might be just me though. but i usually reinstall ubuntu when something messes up like that. i like the fresh install feeling...nice and clean
[20:25]  * setuid laughs
[20:25] <setuid> petabyte... right
[20:25] <lyrae> theczar me too! :)
[20:25] <Deany> lol, thats the windows feeling
[20:25] <lyrae> a 1TB hd though
[20:26] <setuid> /dev/sdb1             925G  894G   31G  97% /usr/local/array
[20:26] <setuid> /dev/sdc1             8.0T  758G  7.3T  10% /mnt/external
[20:26] <setuid> mmm... space
[20:26]  * setuid hugs his Drobo
[20:26] <theczar> lyrae, niiice well time to nuke this puppy, thanks for all your help, lyrae, vigo, catch ya later
[20:26] <lyrae> 7.3 t?
[20:26] <fephisto> I have my computer split between two main OSes, one for Vista, and another for Xubuntu.  I'm currently in Xubuntu and am trying to access the files in the other partition, does anyone know how?
[20:26] <Deany> i guess a fresh install and restoring your home folder is a pretty quick reinstall..as long as you install the same packages
[20:26] <lyrae> theczar i was planningo n helping with virtual hosts
[20:27] <lyrae> theczar but we never even got that far, haha. if you still need helping setting those up after you get apache2 installed correctly, try this channel again
[20:27] <setuid> lyrae, Yes, as in terabytes
[20:28] <lyrae> setuid:  you realize you will never use that much, right?
[20:28] <amenic> Someone .. for the love of god
[20:28] <amenic> please explain to me why this CIFS VFS error upon shutdown / reboot of ANY ubuntu distro has not been fixed?
[20:28] <amenic> (when you mount windows shares using smb)
[20:28] <digitalnorm> to find a list of installed apps one would:  ?  i tried: find '*.exe' but it didn't work
[20:29] <lyrae> digitalnorm: youre looking for .exe apps in ubuntu?
[20:29] <Cpudan80> digital_, you have to look at the packages you've installed
[20:29] <amenic> .exe = win32 viruses!
[20:29] <lyrae> digitalnorm: i think youre in the wrong channel
[20:30] <user___> amenic: do you have a bug id? maybe it explains why and gives an intermediate fix
[20:30] <lyrae> #windows
[20:30] <jarco> hello all. my numpad is disabled at once. is it a key combination inj ubuntu?
[20:30] <Cpudan80> digital_, sudo dpkg --get-selections | grep '[[:space:]]install$=’| awk ‘{print $1}’ > installedpackages
[20:30] <amenic> user____: it is a bug and one that they are aware of and there are work arounds but it doesn't excuse why something so trivial hasn't been addressed
[20:30] <amenic> some of the fixes are nothing more than just renaming runlevel files
[20:30] <johan12> thx for everything, i'll be back
[20:31] <amenic> Its just lazy
[20:31] <Cpudan80> digital_, will get the names of everything you've installed
[20:31] <digitalnorm> cpudan80: is there a list of installed packages anywhere?
[20:31] <amenic> user____:  https://bugs.launchpad.net/ubuntu/+source/sysvinit/+bug/184676
[20:31] <Cpudan80> digital_, You get one by running that command, it will be printed to a file in your current directory called "installedpckages"
[20:31] <lyrae> Cpudan80: youre sending msgs to digital_, his nick is digitalnorm
[20:31] <Cpudan80> installedpackages**
[20:31] <lyrae> :p
[20:32] <Cpudan80> oh
[20:32] <Cpudan80> Indeed I am
[20:32] <Cpudan80> digitalnorm, ^
[20:32] <jarco> hello all. my numpad is disabled at once. is it a key combination inj ubuntu?
[20:32] <lyrae> digitalnorm: click applications and checkout add/remove
[20:32] <lyrae> might be what youre looking for
[20:33] <digitalnorm> lyrae: i switched to xmonad to make myself learn command line
[20:33] <lyrae> ah ok
[20:34] <user___> amenic: are you "flaccid" by any chance?
[20:34] <setuid_> lyrae, I already use about 4TB of that on another 2 systems, and that's only 45% of my data
[20:34] <setuid_> So I fully expect to reach the 8TB by the end of this year
[20:34] <amenic> no sir
[20:34] <amenic> w/e that means
[20:35] <amenic> actually i'm quite emotionally erect :)
[20:35] <lyrae> setuid im scared to ask what takes up so much space.... i have a 1TB and its 40% full..ive had it for a year
[20:35] <flaco> hey.. I want to delete all the .pyc files from a folder and subfolders.. I'm using this.. find . -name *.pyc -exec rm -rf {} \; but it does not work... I'm missing something?
[20:35] <fephisto> Nevermind:  http://ubuntuguide.org/wiki/Dapper#How_to_mount_Windows_partitions_.28NTFS.29_on_boot-up.2C_and_allow_all_users_to_read_only
[20:35] <jrib> flaco: surround your pattern in single quotes so your shell doesn't expaind it
[20:36] <amenic> setuid_ what kinda data you trucking bro?
[20:36] <jedi06> is there something like minitab for ubuntu?
[20:37] <reaktae> guys, i need help again. i've done a fresh raid1 install with boot, / and swap mirrored. tested the system by removing each drive and plugged them in again. now i'm stuck with this: http://pastebin.com/d2d75e20b no resyncing is being done. how can i kickstart it?
[20:37] <flaco> jrgp, thks
[20:37] <zipper> hello
[20:38] <zipper> you bloody wanker
[20:38] <sexcopter> hi, i just bought a nice new dell laptop with a T5900 processor, and according to the command "egrep '^flags.*(vmx|svm)' /proc/cpuinfo", it doesn't support hardware virtualization... what processors do support it??
[20:39] <jrib> flaco: by the way you can use -delete instead of your -exec
[20:40] <cyka> hey
[20:40] <nyaa> sexcopter I sent you a message
[20:40] <amenic> sexcopter: http://en.wikipedia.org/wiki/Virtualization_Technology
[20:40] <LovefootB> damn linux is better than windows by miles
[20:40] <cyka> need a wee bit of help. in getting an app called hyperlobby to work under wine
[20:41] <jedi06> does anyone know of any statistical programs like minitab i can install?
[20:41] <cyka> and i also have a problem with a an app called ubi.com too
[20:41] <cyka> for playing il2 online..
[20:42] <cyka> again windows based but running under wine. it says it can't create game communication instance
[20:42] <user___> jedi06: just an idea: the wikipedia page of minitab provides alternative programs at the end of the page
[20:42] <cyka> anyone alive?
[20:42] <Nomexous> cyka: #winehq
[20:42] <Pici> cyka: #winehq handles supporting the installation and running of applications under Wine.
[20:42] <cyka> aha thanks folks
[20:43] <shear> hmm, is the emerald-themes package deprecated? I try to install emerald and emerald themes, i now have emerald, but zero themes
[20:43] <naenae> ok i installed a game called assault cube and i dont like it. so i went into add/remove programs and cant find it and i cant find it in synaptic Package manager. so can someone tell me how to uninstall it????
[20:43] <TraceRoute> does anyone know if you can add more than one directory to ushare.conf?
[20:43] <shear> and spt-get emerald-themes gives me the "referred to by another package...blah blah"
[20:43] <shear> apt-get, rather
[20:44] <fearlessdawg> naenae if you don't know where it is you could do find . | assult          or something similar to locate is binaries and see if it has it's own uninstall script
[20:44] <jarco> hello all. my numpad is disabled at once. is it a key combination inj ubuntu?
[20:44] <Honksu> After installing 8.10 and graphically logging I get background with cursor. Then keyboard locks up and all I can do is move the cursor(shutdown by unplugging my laptop with almost dead battery and linux autoshutdowns). If I press ctrl+alt+F2 I get logging screen with huge font and text goes over the bottom edge of my screen, so I have to use command clear all the time. Have can get things working?
[20:45] <dayo_> naenae: did u install with apt?
[20:45] <mike12> hey are there any good chat channels
[20:45] <naenae> so i installed it as a DEB package
[20:45] <naenae> from deb.net
[20:45] <naenae> now i cant find it
[20:45] <detrate-> where can I find a checksum of 64bit ubuntu?
[20:45] <nyaa> sexcopter: are you there?
[20:46] <dayo_> naenae: then u wouldn't find it with apt. try sudo dpkg -r <package name>
[20:46] <Pici> detrate-: http://releases.ubuntu.com/8.10/MD5SUMS
[20:46] <fearlessdawg> naenae try ~/.Games/AssaultCube_v1.0
[20:46] <detrate-> thank you very much
[20:47] <Honksu> And why didn't the installation ask for root password? I tried to edit /boot/grub/menu.lst by addind kernel switch vga=793 or 7X3 but it didn't work.
[20:47] <Pici> !root | Honksu
[20:47] <naenae> those commands u gave me arent working
[20:48] <fearlessdawg> naenae open a terminal and type ls -l ~/.Games and see if it is there somewhere in the list
[20:48] <dayo_> naenae: you need to replace <packagename> with the name of the deb file
[20:48] <Luis__> t veo
[20:48] <Cadman21> can anyone tell me why my firefox would stop connecting to like half.com and ebay?
[20:48] <Felix_> hola luis
[20:48] <Felix_> que pasa loco
[20:48] <Luis__> HIiiii
[20:48] <naenae> wait
[20:48] <naenae> i was just typing it wrong
[20:48] <naenae> the dpkg -r command worked
[20:49] <Luis__> see u too
[20:49] <Felix_> wass up issac
[20:49] <naenae> and that compltely removed it correct??
[20:49] <dayo_> naenae: great
[20:49] <detrate-> so follow up question... I tried to do the check disk for defects and I'm getting i/o errors... how can I md5 checksum the disk?
[20:49] <dayo_> naenae: yes. but u'll probably have some config files lying around
[20:49] <naenae> will that command get rid of all the data files and loose files?
[20:49] <detrate-> I need to figure out if it's caused by my drive or the disk
[20:49] <naenae> how do i get rid of config files
[20:50] <fearlessdawg> naenae i think there held in ~/.Games
[20:50] <jarco> can anyone tell me what in ubuntu is causing my numpad to be diabled? i know its a key combination to trigger it but i dunno what combination
[20:50] <dayo_> naenae: i'm not entirely sure. had it been installed with apt, u would have used 'sudo aptitude purge <packagename>'
[20:50] <Felix_> list servers
[20:50] <naenae> ya its kool least i got rid of it
[20:50] <naenae> thanks for your help
[20:51] <nikos> ti ginaite
[20:51] <dayo_> naenae: i checked. it's sudo dpkg -P <packagename>
[20:51] <dayo_> naenae: that would clean it all out
[20:51] <naenae> that will get rid of the rest?
[20:51] <nickrud_> naenae, the purge will get any system config files; the config files in your $HOME won't be touched
[20:51] <setuid_> amenic, Personal data, system backups, some client data, lots of photos (RAW and 95% compression jpeg), some music, and about 1TB of vmware images I use for development and testing (I'm an OSS author/contributor)
[20:51] <Honksu> Pici: I realized that already but it doesn't help me with my problem.
[20:51] <fearlessdawg> jarco: try shift+numlock
[20:51] <naenae> ok awesome thank you so much
[20:51] <jlamsens> Anyone already has Compiz 0.7.8 running on Ubuntu 8.04 ? I have the problem: https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/242735
[20:51] <jlamsens> Apparently, compiz 0.7.8 is only available for Intrepid, not for hardy. No backuport exists. Latest Compiz version for hardy: 0.7.6
[20:52] <malasgaa> can someone help me with skype, i use regular headset and it won't capture audio, but I can heard the sound
[20:52] <jarco> lol fearlessdawg that was it
[20:52] <dayo_> naenae: type 'man dpkg' to see all the options
[20:52] <Pici> Honksu: sudo nano /path/to/file  will allow you to edit it just fine.
[20:52] <dayo_> naenae: u're welcome
[20:52] <jarco> awsome and thx mate it frustrated me for over an hour now fearlessdawg
[20:52] <felix_> Hello everybody  Just a test i am  one of the new interns
[20:52] <fearlessdawg> yw jarco
[20:53] <Pici> felix_: We appreciate the help, but this is a support channel. If you just want to chat you can join #ubuntu-offtopic.
[20:53] <malasgaa> can someone help me with skype, i use regular headset and it won't capture audio, but I can heard the sound
[20:53] <Viper-Mode> new interns?
[20:54] <Jerusalem420> how can i see what apt packages i have installed and detele the ones i dont want
[20:54] <Jerusalem420> delete
[20:54] <Pici> Jerusalem420: Synaptic Package Manager or aptitude
[20:54] <jlamsens> @Jerusalem: dpkg -l
[20:54] <karsten> 0
[20:54] <nickrud_> Jerusalem420, dpkg -l | grep ^ii | sort  > installed-packages.txt
[20:55] <Jerusalem420> thanks dudes (and dudettes if there happen to be any)
[20:55] <malasgaa> can someone help me with skype, i use regular headset and it won't capture audio, but I can heard the sound
[20:55] <jlamsens> Anyone knows a dedicated IRC channel for a Compiz question ?
[20:55] <Pici> jlamsens: #compiz-fusion
[20:55] <malasgaa> i dont
[20:55] <dan> hey guys. im what you all would call a noob to ubuntu, and im having trouble turning on my atheros wireless card via terminal anyone have any ideas?
[20:55] <jlamsens> thanks Pici
[20:56] <dreamy> how do i know if my frame rate is good ? with glxgears ?13034 frames in 5.0 seconds = 2605.888 FPS
[20:56] <fearlessdawg> malasgaa: if you google your issue there are plenty of articles regarding this in the first page. I am not sure myself so i would suggest trying this if you can't get help here
[20:56] <kurrata> dreamy:  its good i have 1100 fps
[20:57] <mike12> hey are there any advice channels
[20:57] <dreamy> i wanna know if my 3d is good .. :S
[20:57] <dan> anyone have any experience using ubuntu on and asus m50vm?
[20:57] <boingOo> 12782 frames in 5.0 seconds = 2556.238 FPS
[20:57] <Pici> glxgears is not a benchmark
[20:57] <user___> mike12: advice concerning what?
[20:57] <malasgaa> fearlessdawg, thanks, i will google it
[20:57] <CheesyWeasel> .mov files have no sound. which package do i need?
[20:57] <mike12> user___ love
[20:58] <dreamy> kurrata: what abou the 1st line : 1898 frames in 5.0 seconds = 379.576 FPS ..  :: good too ?
[20:58] <user___> mike12: not here, sorry, use google :-)
[20:58] <mike12> k thanks
[20:58] <dreamy> :S
[20:58] <CheesyWeasel> .mov files have no sound. which package do i need?
[20:58] <CheesyWeasel> oops
[20:58] <boingOo> CheesyWeasel: .mov is from apple quicktime
[20:58] <CheesyWeasel> boingOo: yea.
[20:58] <dan> any experience with an asus m50vm and ubuntu
[20:59] <CheesyWeasel> boingOo: i've played them before on ubuntu
[20:59] <unr3a1> hey all
[20:59] <tr3nd> Anyone know if NTFS filesystem works in Ubuntu?
[20:59] <unr3a1> how do I get ubuntu to load up thunderbird when I click on a mailto link rather than evolution mail?
[20:59] <paolob> Hi guys! how the hell do I configure the interfaces in intrepid recovery mode? thank you
[20:59] <Pici> tr3nd: You can read and write to NTFS paritions, but you cannot install Ubuntu on one.
[20:59] <unr3a1> and is there a way to remove evolution mail?
[20:59] <setuid_> unr3a1, apt-get remove --purge evolution evolution-data-server
[21:00] <tr3nd> Pici: So if i connect a harddrive with no operatingsystem on, only some file, will it work?
[21:00] <CheesyWeasel> theres a package out there taht will let me play .mov files. i know there is.
[21:00] <dreamy> boingOo: did u get about 300 fps at the beggining too ?
[21:00] <unr3a1> setuid: will that kill my two birds with one stone?
[21:00] <fearlessdawg> tr3nd: you use an NTFS to read and write to from ubuntu yes
[21:00] <fearlessdawg> can*
[21:00] <tr3nd> ok
[21:00] <fuser> how will i know which kernel version am i using
[21:01] <frostburn> fuser, uname -a
[21:01] <CheesyWeasel> which package do i need to hear sound out of my .mov files?
[21:01] <jbotalan> I am trying to use lynx to log into my router; it requires a blank username and my password. I get the prompt for authentication, but when I press enter to confirm the blank username, lynx thinks I am telling it not to authenticate. Is there a way to pass a blank username to it? I tried through the command-line too, but to no avail.
[21:01] <fuser> thanx
[21:01] <Youngblood> CheesyWeasel: try mplayer with w32codecs
[21:02] <fuser> 2.6.27-9-generic, is it the latest frostburn?
[21:02] <KillerOrca> has anyone had any luck updating ushare via the terminal? I keep getting an error
[21:02] <Viper-Mode> jbotalan: not sure but you can try a few other text browsers, w3m, links, links2, elinks...
[21:02] <frostburn> fuser, i'm on 2.6.27-11-generic  but its SMP
[21:02] <frostburn> and 64bit
[21:02] <jbotalan> viper: thanks i didn't know of other browsers and my googling skills must be a bit off
[21:02] <KemrinH> Hey, I'm wondering if there's some way to determine the IP address of the person you're chatting with over Pidgin.
[21:02] <Viper-Mode> jbotalan: np
[21:02] <fuser> what is smp??
[21:03] <BramP> does anyone know where I can see the exact name of my router in ubuntu?
[21:03] <Deany> jbotalan, will entering a space or something do it?
[21:03] <marcel> i would like to write some applications, any requests for me? Any ideas?
[21:03] <rudecharles> Who is up for a technical challenge that will end in eternal online reverence?  It is a 64  bit sword in a stone.
[21:03] <user___> marcel: kernel drivers ;-)
[21:03] <CheesyWeasel> Youngblood: i hate mplayer
[21:03] <jbotalan> deany: i'm not sure. i'm apt-get'ing w3m to see if i can go that route
[21:04] <KemrinH> marcel: How about an application that imitates a graphing calculator?
[21:04] <marcel> KemrinH, thats a good idea
[21:04] <marcel> KemrinH, like the HP ones?
[21:04] <Deany> CheesyWeasel, try smplayer.  more advanced
[21:05] <fuser> should i upgrade my kernel??
[21:05] <dan> how would i turn on a wireless card via terminal?
[21:05] <CheesyWeasel> i want it to work with vlc
[21:05] <KemrinH> marcel: HP is good, I was thinking like Texas Institute though. Really any fully functional graphing calculator would work
[21:05] <_dark_> would one call it bad when my fps in glxgears drops from ~6400fps to ~430fps and stays down there, after a fresh reboot? :Þ
[21:05] <balrog__> how do i setup a vpn connection in intrepid?
[21:05] <jarco> hello, huge problem here. I can only use one sound application at the same time. The others get all locked. Any toughts?
[21:05] <marcel> KemrinH, i'll think about it
[21:05] <Marfi> _dark_, what else is running?
[21:05] <KemrinH> Hey, I'm wondering if there's some way to determine the IP address of the person you're chatting with over Pidgin.
[21:05] <rudecharles> Anyone up for the *great challenge* Linux has ever created?!
[21:05] <dayo_> KemrinH: Texas Instruments?
[21:05] <CyberGabber> fuser: SMP = Symmetric multiprocessing, see : http://en.wikipedia.org/wiki/Symmetric_multiprocessing
[21:05] <Marfi> KemrinH, sorry, not the channel for that. ;)
[21:06] <KemrinH> dayo Yeah, sorry
[21:06] <savvas> rudecharles: is it a rootkit? :)
[21:06] <_dark_> nothing really, just booted it and tried it before I started anything
[21:06] <dan> anyone know how to turn a wirelss card on via terminal
[21:06] <KemrinH> Marfi oh, well is there a pidgin channel?
[21:06] <rudecharles> savva -- absolutely not!
[21:06] <rudecharles> savvas, that is.
[21:06] <jbotalan> KemrinH: TI offers an emulator that runs under windows. i think it wouldn't be too hard to get running under wine
[21:06] <user___> KemrinH: /whois $nick would be a start
[21:06] <Deany> believe it or not, #pidgin is the channel
[21:06] <Marfi> KemrinH, thats a "google the question" question. =)
[21:06] <fuser> thanx cyber
[21:06] <savvas> rudecharles: ask away, someone will reply
[21:07] <jarco> hello, huge problem here. I can only use one sound application at the same time. The others get all locked. Any toughts?
[21:07] <KemrinH> jbotalan Yeah, I was just suggesting a program that  Marfi might build.
[21:07] <CheesyWeasel> what package do i need to get the sound of my mov files in VLC?
[21:07] <fuser> how can i upgrade my kernel?
[21:07] <Hondo_Kitsune> Who knows much about Ext2FSD?
[21:07] <BramP> Does anyone know where/how I can see the exact name of my router?
[21:07] <Deany> CheesyWeasel, try another application.  no reason you should stick to 1.
[21:07] <Marfi> BramP, check the settings in your router
[21:07] <savvas> BramP: on the front/back of your router?
[21:08] <Marfi> fuser, sudo apt-get update && sudo apt-get dist-upgrade
[21:08] <Youngblood> CheesyWeasel: You have all the restricted extras?
[21:08] <Deany> CheesyWeasel, VLC has all its codecs builtin, if it dont play, it dont play
[21:08] <CheesyWeasel> Deany: except for the fact that i worship vlc and it has worked for me in the past with no problems
[21:08] <CheesyWeasel> Deany: its not vlc, its ubuntu
[21:08] <rudecharles> Thanks savvas.  Okay everybody.  I have a Gateway m-1617 laptop.  I can not connect it to the internet via cable.  It has a Marvell Topdog Wireless card which is not working.  I have tried just about every tutorial online, and the drivers that aren't invalid all say that either there is no hardware present and/or the drivers were not properly installed.
[21:08] <fuser> thanx marfi
[21:08] <Honksu> Pici: I got the text mode resolution right but after loging into graphical interface I still got only background, cursor and my keyboard locks up.
[21:08] <CheesyWeasel> Youngblood: ubuntu-restricted-extras? yeah
[21:08] <balrog__> jarco: are you using adobe flash at all since logging into your computer?
[21:08] <BramP> Marfi & savvas thanks guys
[21:08] <Nerooooo> hi
[21:08] <Deany> CheesyWeasel, i used to use VLC too.  i switched.
[21:08] <CheesyWeasel> Deany: good for you
[21:08] <Nerooooo> i need help with vpn
[21:08] <Deany> ok then,.
[21:09] <jarco> balrog__, i rebooted gnome but not pc. After gnome reboot no flash. Can flash lock sound btw?
[21:09] <Youngblood> CheesyWeasel: You could always try recompiling it to make sure it have support you need
[21:09] <Nerooooo> does anybody use ubuntu with von?
[21:09] <CheesyWeasel> Youngblood: yeah...
[21:09] <CheesyWeasel> ugh
[21:09] <Nerooooo> does anybody use ubuntu with vpn
[21:09] <Marfi> jarco, yes
[21:09] <CheesyWeasel> this is why i sometimes hate ubuntu
[21:10] <jarco> but Marfi i can play sound with one program at the time. Thats the weird thing
[21:10] <Youngblood> CheesyWeasel: I used to use gentoo so I recompile alot...
[21:10] <Hondo_Kitsune> Who knows much about Ext2FSD?
[21:10] <Marfi> jarco, for me, i have just accepted it, and done it like that. i hate the sound over lapping, so it works out
[21:10] <fuser> is there anything like cover flow (mac) in kubuntu
[21:10] <jarco> Marfi, i need it to be able to watch vidio while on teamspeak
[21:11] <fuser> i want shift switcher type functionality in folder browsing
[21:11] <Marfi> jarco, try to set one for alsa, and one for pulse?
[21:11] <lonel> hi is it possible to change the startup order of services ..i need to have slapd running before all other services
[21:11] <jarco> mm and how do i do that?
[21:12] <AbtZ> hey, how do i start a screen session in detached mode?
[21:12] <unr3a1> how do I get thunderbird to come up with a new email when I click on a mailto link on a website?
[21:12] <Marfi> jarco, mess with the sound properties
[21:13] <dreamnid> AbtZ: screen -d -m
[21:13] <Hikeractive> unr3a1, you can set that under preferences preferred applications
[21:13] <CheesyWeasel> it works in mplayer
[21:13] <jarco> k k i ll try
[21:13] <AbtZ> dreamnid, thanks! :)
[21:13] <rudecharles> Does wireless even work for Ubuntu?
[21:13] <Youngblood> CheesyWeasel: VLC has sound in other files right?
[21:13] <unr3a1> Hikeractive: in firefox?
[21:13] <unr3a1> Hikeractive: nvm.  found it
[21:14] <Hikeractive> ok
[21:14] <Hikeractive> sorry, i use openbox, not gnome
[21:14] <detrate-> yeah damn, my drive is shot :(
[21:14] <CheesyWeasel> Youngblood: avi works fine
[21:14] <Hikeractive> i didn't know which menu offhand
[21:15] <mike12> my update manager isnt working and in the message bar on the top of my screen it says thaat the error message was >0 what do i do
[21:15] <TraceRoute> any in here have ushare installed?
[21:15] <mike12> it also will not let me enter add remove software and synaptic manager
[21:15] <Lycus> Need some help--using 8.10, trying to boot into Ubuntu, it boots into BusyBox. Says no resume image found, what else should I be looking for/doing?
[21:15] <tcdiem> can anyone help me about running ubuntu on a netbook ? i know that i386 works .. but which one is better to use netbook remix, ubuntu mobile, lpia packages from ports.ubuntu, i386 ??
[21:16] <rudecharles> Anyone still willing to help: I have a Marvell Topdog Wireless card that came inside my Gateway and am unable to get any form of wireless internet.
[21:16] <Youngblood> CheesyWeasel: hmm... I'm at a loss
[21:16] <redvamp128> Filling a drive to 8TerraBytes?
[21:16] <SmokeyD> Hey people. I am having trouble logging in. Gnome complains that .dmrc and $HOME should not be world writable. But they aren't. They are 644 and 750 respectively
[21:16] <redvamp128> I know that fix SmokeyD
[21:16] <SmokeyD> are there any other files which could cause the same problem?
[21:17] <bkpavan> 1
[21:17] <redvamp128> Ubuntu .dmrc permission issue - a fix <http://www.ubuntuproductivity.com/journal/ubuntu/08/2008/fix-ubuntu-dmrc-permissions-error-on-login/>   SmokeyD
[21:18] <redvamp128> SmokeyD:  Ubuntu .dmrc permission issue - a fix <http://www.ubuntuproductivity.com/journal/ubuntu/08/2008/fix-ubuntu-dmrc-permissions-error-on-login/>
[21:18] <ActionParsnip> yo yo yo
[21:18] <CheesyWeasel> fixed it
[21:18] <Youngblood> CheesyWeasel: what was it?
[21:19] <CheesyWeasel> Youngblood: i changed the output module to ALSA
[21:19] <ActionParsnip> alsa rocks :)
[21:19] <Youngblood> ahhh...
[21:19] <SmokeyD> redvamp128: already tried that
[21:19] <SmokeyD> doesn't help
[21:19] <Deany> dont know why that would play 1 format and not another.. odd
[21:19] <detrate-> i/o errors caused by a drive are probably not worth troubleshooting, I should just get a new drive, right?
[21:19] <redvamp128> SmokeyD you have to
[21:19] <CheesyWeasel> gracias
[21:19] <redvamp128> not be logged into the desktop
[21:19] <ActionParsnip> detrate-: does an fsck not help?
[21:20] <redvamp128> SmokeyD:  PM
[21:20] <Gnea> detrate-: could be a bad cable
[21:20] <detrate-> Gnea: brand new cable
[21:20] <detrate-> I'll try another though
[21:20] <detrate-> it fails to cache info from disk it seems
[21:20] <drevo1> quit
[21:20] <detrate-> it's a DVD-RW
[21:20] <Gnea> detrate-: seen it happen on supposedly new ones
[21:20] <detrate-> and I can't install ubuntu with it >_<
[21:20] <detrate-> okay, I'll test that, thanks
[21:20] <_dark_> in the system monitor, Resources .. both cpu cores all all over the place going up to 20-50% when system is idle and no applications are running, except now xchat ... but in Processes nothing seems to be taking cpu time... gnome system mon. 2% xchat 1% firefox 0-1%...
[21:20] <ActionParsnip> detrate-: you can use the util from the drive manufacturers site to check the drive
[21:21] <_dark_> is that normal?
[21:21] <Honksu> Installed 8.10 and after graphical login I get background + mouse + keyboard locks up. I started to update now. If you have solutions to this problem please pm me.
[21:21] <rudecharles> In my Wireless Network Drivers it says "Hardware Present: No."  What does this mean?
[21:21] <algiz> hi guys, someone know's how can I change the IP of a mail server (I'M the admin of the domain and the MX server)
[21:21] <detrate-> ActionParsnip: I got it without manuals or cd's
[21:21] <detrate-> whatever that TLA is
[21:22] <ActionParsnip> detrate-: jump into bios, it will show the model of the drive
[21:22] <redvamp128> SmokeyD:  check for PM
[21:22] <Melik> s
[21:22] <detrate-> ome
[21:22] <detrate-> oem*
[21:22] <ActionParsnip> algiz: you can ssh over and edit /etc/network/interfaces
[21:22] <SmokeyD> redvamp128: I don't have one
[21:23] <Deany> algiz, thats done thru mx records isnt it
[21:23] <redvamp128> SmokeyD -- you have to be in terminal Failsafe for it to run
[21:23] <ActionParsnip> Honksu: use the mouse to change the kb layout
[21:23] <ActionParsnip> Honksu: you could read dmesg maybe, the updates may help
[21:23] <redvamp128> SmokeyD:  on the Login screen choose options-- then sessions then terminal failsafe then type those commands
[21:24] <redvamp128> to get out of failsafe terminal type quit or exit
[21:24] <algiz> looks, I have the DNS server in xxx.xxx.xxx.xxx, and actually the MX is the same DNS server, but now i want to translate the SMTP server to other computer with other IP,
[21:24] <redvamp128> Wpm
[21:24] <SmokeyD> redvamp128: ok, thanks
[21:24] <g0th> hi
[21:24] <redvamp128> SmokeyD:  won't work if you are signed into the account you are trying to fix
[21:24] <dreamy> danger from the deep runs slow but its not the 3d . its by the time its using the hard disk
[21:24] <ActionParsnip> rudecharles: if the system says hardware not found, its the wrong driver
[21:24] <afallenhope|work> hey I can't install php5-curl I get the following issue: http://pastebin.ca/1313937
[21:24] <SmokeyD> redvamp128: ok
[21:24] <g0th> how can I boot the system on /dev/sda3 with the ubuntu installation cd?
[21:24] <g0th> I reinstalled windows on /dev/sda1
[21:25] <Gnea> !grub | g0th
[21:25] <ActionParsnip> !grub | g0th
[21:25] <ActionParsnip> bah, too fast Gnea
[21:25] <techsuperfreak> algiz, set the mx record to the ip of your smtp server
[21:25] <balrog__> jarco: yeah, flash has had trouble with sound on linux since day 1...
[21:25] <Lycus> Can anyone help me with BusyBox please?
[21:25] <fuser> i just want to view the source code of ubuntu 8.10 or may be 9.04
[21:25] <krstnsn`> of hand does anyone know what xorg is?
[21:25] <redvamp128> SmokeyD:  I just had this happen to me the other week where I copied a file from an install of 8.10 over to my 8.04 -- different user then tried to delete the file
[21:25] <algiz> techsuperfreak, thanks, but... where is it??
[21:25] <ActionParsnip> !anyone | Lycus
[21:26] <g0th> Gnea: there it says to boot the cd but I can't boot the cd
[21:26] <algiz> i have bind to administrate the subdomains.
[21:26] <detrate-> nope, wasn't cable
[21:26] <balrog__> jarco: restart and the immediately play a music file and see if you still have the problem.  if you do, then its most likely a driver issue.
[21:26] <kurrata> !xorg
[21:26] <techsuperfreak> algiz: the mx record is set via dns
[21:26] <afallenhope|work> hey I can't install php5-curl I get the following issue: http://pastebin.ca/1313937
[21:26] <jarco> balrog__, my problem is flash unrelated
[21:26] <Lycus> ActionParsnip: Thanks for the help, but I tried asking already.
[21:26] <jarco> i didnt even use flash since my reboot
[21:26] <Honksu> ActionParsnip: I am installing updates ATM lets see if they'll help.
[21:26] <algiz> yeah techsuperfreak..
[21:26] <g0th> Gnea: that is because I get errors when it tries to boot from cd
[21:26] <algiz> but ... do i have to wait some time or something?
[21:26] <techsuperfreak> algiz: do you manage the domain or the dns server?
[21:26] <krstnsn`> kurrata, thanks. i knew what X was. i didnt know it was called xorg
[21:27] <Lycus> Need some help--using 8.10, trying to boot into Ubuntu, it boots into BusyBox. Says no resume image found, what else should I be looking for/doing?
[21:27] <krstnsn`> and i say it in TOP
[21:27] <nyaa> !tty
[21:27] <krstnsn`> saw
[21:27] <g0th> Gnea: so it should be possible somehow to tell it to use /dev/sda3 as root but I dunno how (?)
[21:27] <fuser> from where i could download the source code of linux or ubuntu
[21:27] <algiz> because i change in the DNS the mail.xxxx.com to other ip, but does not work.
[21:27] <linoge> how do i convert a bunch of mp3 files to ogg?
[21:27] <linoge> s/do/can/
[21:27] <ActionParsnip> afallenhope|work: sudo apt-get install libkrb5-dev
[21:27] <afallenhope|work> ActionParsnip, I did..
[21:28] <mike12> OMG
[21:28] <afallenhope|work> ActionParsnip, then I have to install more stuff
[21:28] <techsuperfreak> algiz: pm?
[21:28] <krstnsn`> is 20-25% cpu usage from X normal?
[21:28] <ActionParsnip> algiz: after the update, you may need to flush the dns cache on the local client system so it can relearn the new ip
[21:28] <g0th> can anyone help me with that?
[21:28] <mike12> i just updated my computer now it wont let me open synaptic manager or ad remove software. it wont even let me run what it says to run to fix the problem
[21:29] <fuser> linoge install sound converter
[21:29] <g0th> is there a cd image I can burn that is able to boot from /dev/sda3?
[21:29] <ActionParsnip> !fixapt | mike12
[21:29] <nyaa> I sent you a message gOth
[21:29] <afallenhope|work> ActionParsnip,  http://pastebin.ca/1313944
[21:29] <mike12> thanks ubottu and action parsnip
[21:29] <ActionParsnip> g0th: you just need to add the extra entry in /boot/grub/menu.lst
[21:30] <algiz> thanks ActionParsnip,  but.... how can I do it?  :P
[21:30] <linoge> thanks fuser
[21:30] <bluelightningvid> is there a application that converts video formats in ubuntu?
[21:30] <g0th> ActionParsnip: what do you mean?
[21:30] <algiz> is my first DNS server, sorry :$
[21:30] <ActionParsnip> algiz: sudo /etc/init.d/networking restart
[21:30] <g0th> ActionParsnip: I can't access my linux system
[21:30] <puppiesRcute> hello any one know how to fix my problem i put in a new cd drive because my old one stopped working and sense i changed that one drive they both will not show up at all or work
[21:30] <Lycus> Need some help--using 8.10, trying to boot into Ubuntu, it boots into BusyBox. Says no resume image found, what else should I be looking for/doing?
[21:31] <g0th> I want to boot it directly with the kernel from a cd
[21:31] <ActionParsnip> g0th: then read the factoid for reinstalling grub
[21:31] <algiz> humm ActionParsnip thanks. i will try, becaus i do /etc/init.d/named restart but just work for the localmachine, no for the world.
[21:31] <fuser> from where i could get the source code of linux kernel
[21:31] <ActionParsnip> g0th: then you can make it boot any partition you wish
[21:31] <Honksu> fuser kernel.org?
[21:31] <Honksu> fuser and ubuntu kernel source with apt-get
[21:32] <jco> hi, I'm installing 8.10 and don't see encryption stuff in the partitioner. I did it in 8.04, is the feature gone? Or am I missing something?
[21:32] <fuser> honksu, it gave me a .bz file
[21:32] <ActionParsnip> algiz: the old ip for the system will be cached and needs flushing so it can be relearned as the new
[21:32] <kurrata> Can i somehow get more information on running process if i know its PID number?
[21:32] <Honksu> fuser It is compressed file.
[21:32] <fuser> honksu, can you tell me the whole command for ubuntu
[21:33] <puppiesRcute> any one know what could cause the cd drives to not show up at all sense i installed a new cd drive
[21:33] <ActionParsnip> kurrata: what sort of thing do you wanna know about a process? you can use: ps -ef | grep <pid>
[21:33] <afallenhope|work> ActionParsnip,  http://pastebin.ca/1313944
[21:33] <fuser> and honksu, i know about tar.bz but how to extract just.bz
[21:33] <dreamy> back
[21:33] <Rencx_> hello, is anyone here who cold help with video?
[21:33] <Honksu> fuser sudo apt-get kernel-suorce
[21:34] <fuser> thanx honksu
[21:34] <dreamy> whats the reason for someone to use utah glx  instead of dri project?
[21:35] <fuser> honksu, it says invalid operation kernel source
[21:35] <Honksu> fuser Yuo must have donwloaded only the latest kernel patch.
[21:35] <fuser> i am on latest
[21:35] <kurrata> ActionParsnip:  i want to konw what command was used to launch the process so i could read the man page for it
[21:35] <Honksu> fuser At kernel.org click the F letter at the 2.6.28.1 kernel line.
[21:36] <Honksu> fuser That gives you full kernel source.
[21:36] <fuser> what is the v and other letters for
[21:36] <ActionParsnip> kurrata: the ps -ef | grep <pid> will gve the name, which you can man
[21:37] <Honksu> fuser F = full source, B = patch baseline, V = view patch, VI = view incremental, C = current changesets
[21:37] <Rencx_> if you have outside cd what is best file system to use on it?
[21:37] <Honksu> fuser so F is what you want
[21:37] <fuser> thanx  honksu for all your efforts
[21:37] <redvamp128> SmokeyD:  any luck?
[21:37] <afallenhope|work> ActionParsnip, http://paste.debian.net/26492/
[21:37] <fuser> hey but the command you gave for ubuntu source is not working
[21:37] <jco> I'm installing 8.10 and don't see encryption stuff in the partitioner. I did it in 8.04, is the feature gone? Or am I missing something?
[21:37] <fuser> it says invalid operation
[21:37] <Ansrana> hello
[21:38] <Rencx_> if I have outside HDD what is best file system to use on it?
[21:38] <kurrata> ActionParsnip:  wrote "ps -ef | grep 13184" and got output "martins  13733 13225  0 23:37 pts/1    00:00:00 grep 13184".
[21:38] <ActionParsnip> afallenhope|work: if you attempt to do what you need does it work, the stuff you have installed may do the trick
[21:38] <Ansrana> i would like to know if a athlonx2 5400 is an overkill vs a pentium D e2180 for a file server ?
[21:39] <ActionParsnip> kurrata: thats the ps command running, the pid you have does not exist
[21:39] <guntbert> kurrata: ps ef ..., not ps -ef, try again
[21:39] <afallenhope|work> ActionParsnip, no.. trying to use PHP curl and I get "curl_init fucntion doesn't exist" but it does..
[21:39] <ActionParsnip> Ansrana: how many users are accessing it?
[21:39] <Krstnsn> lesson 1 dont restart X
[21:40] <ActionParsnip> Ansrana: well, potential users
[21:40] <jonaskoelker> Hey all.  My girlfriend has a webcam and wants me to see her.  What's the best app for us to do this, with me on ubuntu (or debian) and her on windows?
[21:40] <psycovic> hey
[21:40] <afallenhope|work> jonaskoelker, if it's MSN use aMSN
[21:40] <kurrata> guntbert:  wrote it without - and it gave out nonsense...(for my newb brain)
[21:40] <afallenhope|work> jonaskoelker, go http://amsn.sourceforge.net
[21:40] <ActionParsnip> !webcam | jonaskoelker
[21:41] <Ansrana> ActionParsnip:20 users
[21:41] <psycovic> i've got a pretty broad problem...firefox on 8.10 for me is really sluggish. switching tabs and scrolling often lags or just gets stuck for a while. i'm on nvidia 180 on a t61p. any ideas?
[21:41] <Rencx_> if I have outside HDD what is best file system to use on it?
[21:41] <jonaskoelker> afallenhope|work: is the apt-get version fresh enough?
[21:41] <quibbler> Rencx, do you mean an external usb drive if so i use ntfs
[21:41] <afallenhope|work> jonaskoelker, should be.. I have the latest.. you could also get the latest through a ppa
[21:41] <afallenhope|work> !ppa | jonaskoelker
[21:42] <kurrata> guntbert:  http://paste.ubuntu.com/107486/
[21:42] <ActionParsnip> Ansrana: thats plenty of speed, servers tend to need more ram, raid 0+1 will help with speed (with redundancy)
[21:42] <guntbert> kurrata: ok, I like ps aux better anyway, try it once without the grep part, so you get a feeling for the output
[21:43] <Ansrana> ActionParsnip:ok thanks
[21:43] <nbeebo> raid 0+1+2+3+4+5+6+7+8 ftw
 and on what file system i need install linux?
[21:43] <Krstnsn> is a process called "mount.ntfs" because im running wubi?
[21:43] <quibbler> Rencx9, if you are going to use it for linux when it has to be ext3
[21:43] <linxeh> ActionParsnip: actually most decent raids will stripe reads on a mirror - so you get the read performance of striping but with the redundancy. some even stripe writes and buffer the mirror write for speed there too
 it will be the best one?
[21:44] <AbtZ> Krstnsn, seems likely
[21:44] <quibbler> Rencx9
[21:45] <ActionParsnip> linxeh: oh absolutely, but for 20 users, its enough
[21:45] <quibbler> Rencx9 yes
  and how big i need swap drive?
[21:45] <Honksu> ActionParsnip: Graphical interface works after installing the updates! LÖL
[21:45] <Krstnsn> abtz, should it stay running constantly? like ~10-20% CPU?
[21:46] <quibbler> Rencx9, 2x your ram ....1gig ram=2 gig swap partition
 i have ram 4GB so i need 8GB swap?
[21:46] <quibbler> Rencx9, yes
[21:47] <ActionParsnip> Honksu: updates can fix a lot
[21:47] <techsuperfreak> rencx9: https://help.ubuntu.com/8.10/installation-guide/index.html
nice :)) ty for your help, but one more my External HDD is Fat32 how format it on ubuntu?
[21:47] <ActionParsnip> Rencx9: there is no best
[21:48] <AbtZ> Krstnsn, that seems a bit much. what kind of cpu do you have?
[21:48] <guntbert> quibbler: Rencx9: to my eyes 8GB swap is way too much
[21:48] <linxeh> ActionParsnip: I was just saying you can probably just get away with raid1
 about what?
[21:48] <linxeh> if its a decent raid :)
 what swap will do?
[21:48] <kurrata> Rencx:  it will work like your ram when it runs outs
[21:49] <Krstnsn> abtz, centrino 1.6 m i believe
 if i have 4GB ram can it runs out??
[21:49] <ActionParsnip> Rencx9: you asked quibbler what file system linux will use and he answered then you asked if its the best one...there is no best
[21:50] <karsten> x86_64, kubuntu, I've got flashplugin-nonfree installed but man (most?) flash animations don't play in iceweasel.  Am I missing something?
[21:50] <ActionParsnip> Rencx9: each file system type has advantages and disadvantages but ext3 is the default
of corse it can but it is big so swap can be smaler
[21:50] <Krstnsn> abtz, 1.6 GHz Intel Pentium M 730
[21:50] <guntbert> Rencx9: read the link you got from techsuperfreak , but unless you are on a notebook and want to suspend to disk I wouldn't go over 2GB, but others might see it different :)
[21:50] <brandon__>  any body know how download and install them because its does work on mine
 can you say what will be diference if i use NTFS or ext2?
[21:50] <ActionParsnip> karsten: you could try making a symlink to libflashplayer.so in ~/.mozilla/plugins
[21:51] <kurrata> Rencx:  yes
[21:51] <Rencx9> gunbert i am on notebook
[21:51] <karsten> ActionParsnip: The plugin works.  Just not on all content.
[21:51] <brandon__>  any body know how download and install them because its does work on mine
[21:51] <ActionParsnip> Rencx9: ntfs propogates permissions down through the filesystem, ext2 uses a file system so EVERY file has an owner and an access code
[21:51] <AbtZ> Krstnsn, i dont use wubi, so i dont know how effective it is... but it doesnt seem right to me. try killing the process and see what happens. :)
[21:51] <SeMi> Can someone here help me out? It's something super simple
[21:52] <karsten> ActionParsnip: I'd understand that if it was the free plugin (gnash)), but this doesn't make sense w/ Adobe's own Flash plugin.
[21:52] <brandon__>  any body know how download and install them because its does work on my laptop
[21:52] <guntbert> Rencx9: then I'd recommend swapspace = ram
[21:52] <ActionParsnip> karsten: strange, I installed it by copying the .so to the plugins folder and worked flawlessly, you could try that or reinstall the app
[21:52] <Darthneiding> can anybody help with a problem in sound??
[21:52] <karsten> brandon__: wget or curl to fetch th e DEB.  dpkg -i <file>
 and ext2 from ext3? it will be big diference?
[21:52] <SeMi> Does anyone know how to make a bootdisk out of the Ubuntu .iso? I'm on Windows and want to dualboot.
[21:52] <Darthneiding> can anybody help with a problem in sound?? PVT please!!
[21:52] <ActionParsnip> karsten: if you have gnash installed as well as the nonfree, uninstall gnash
[21:52] <brandon__> what
[21:52] <fuser> brandon, what u wnloadnt to dowa
[21:52] <karsten> ActionParsnip: Where'd you get the plugin?
[21:52] <brandon__> itunes
[21:52] <ActionParsnip> Rencx9: ext3 is ext2 + a journal
[21:52] <Rencx9> gunbert ok ty i will do it :)
[21:53] <fuser> what u want to download brandon
[21:53] <ActionParsnip> karsten: www.adobe.com
[21:53] <ActionParsnip> karsten: worth a try
[21:53] <karsten> ActionParsnip: gnash not installed.
[21:53] <karsten> ActionParsnip: Whodathunkit!
[21:53] <ActionParsnip> karsten: good
[21:53] <SeMi> Does anyone know how to make a Ubuntu boot disk on Windows? I want to dualboot Ubuntu with winXP
[21:53] <bakermd> Can you install Ubuntu without OpenOffice?
 cold you help me more with some questions?
[21:53] <techsuperfreak> !grub | SeMi
[21:54] <karsten> ActionParsnip: Hrm.  Package not found when attempting reinstall.  I'll look more later.
[21:54] <SeMi> Thanks
[21:54] <rww> SeMi: Create the disc from the .iso with https://help.ubuntu.com/community/BurningIsoHowto
[21:54] <temppy> bakermd: you can remove openoffice.  Does that work for you?
[21:54] <karsten> ActionParsnip: thanks for suggestions.
[21:54] <AbtZ> SeMi, use unetbootin. with it you can create a boot usb :)
[21:54] <guntbert> Rencx9: yw, btw you can type just the first characters of a nickname and let it complete with the <tab> key :)
[21:54] <fuser> brandon, run it using wine
[21:54] <ActionParsnip> karsten: sudo apt-get clean; sudo apt-get --reinstall install flashplugin-nonfree
[21:54] <Rencx9> guntbert: nice :)
[21:54] <bakermd> temppy: Unfortunately, no.  I am doing a preseed network load to clients with small disks and need OpenOffice to be excluded
[21:55] <brandon__> can any body help me
[21:55] <Darthneiding> Hey guys, im trying to play americas army, but im having problem with sound... the audio doesnt work in the game. Can anybody help me?
[21:55] <Flare183> !anyone | brandon__
[21:55] <bakermd> Additionally it would be nice to install Ubuntu without ANY of the compiz* packages
[21:55] <fuser> brandon, run itunes through wine
[21:56] <brandon__>  any body know how download and install them because its does work on my laptop
[21:56] <Rencx9> guntbert: what OS you recomend me to use what use you?
[21:56] <ActionParsnip> bakermd: compiz is optional
[21:56] <brandon__> ok
[21:56] <w00b3> how do i find out what my network domain is in samba?
[21:56] <bakermd> ActionParsnip: Is OpenOffice?
[21:56] <temppy> bakermd: well, I suspect you could install the server edition, and then install whatever else you want manually
[21:56] <ActionParsnip> !info openoffice | bakermd
[21:56] <Miesco> w00b3: cat /etc/samba/smb.conf
[21:56] <guntbert> Rencx9: this is the ubuntu support channel :)
[21:56] <Mimi> Hey, my mouse media buttons worked just fine when I installed Ubuntu, but now only 2 do. How can I tell Ubuntu to *rescan* it for me?
[21:56] <Rencx> How can i format external hard drive on ubuntu?
[21:57] <Darthneiding> Hey guys, im trying to play americas army, but im having problem with sound... the audio doesnt work in the game. Does anybody knows how to solve this problem?
[21:57] <kurrata> Rencx:  mount it and use gparted
[21:57] <ActionParsnip> !info openoffice.org-base | bakermd
[21:57] <SeMi> Hey, with "ISO Recorder", does it make it bootable so I can install Ubuntu?
[21:57] <fuser> brandon amarok should go on with ipods
[21:57] <guntbert> !repeat | Darthneiding
[21:57] <ActionParsnip> bakermd: the factoid says its optional
[21:58] <Darthneiding> :/
[21:58] <bakermd> ActionParsnip: Okay - so what I need now is how to tell a preseed install to Exclude something
[21:58] <brandon__> it wont let me because i went to the remove and add and i tried and it wouldnt check
[21:58] <Rencx> kurrata: how can i run it throught terminal?
[21:58] <ActionParsnip> bakermd: preseed?
[21:58] <GoneWestCoast> Darthneiding: Instead of whining about not knowing what to do, why not look at logs, see what's breaking, do some basic troubleshooting?  People'll be likelier to help if they see you've taken proactive steps and have specific questions past "It broke!"
[21:59] <Darthneiding> damn linux... i hate windows, but now im getting nervous with linux... nothing works perfectly
[21:59] <SeMi> I'm looking at these pages, and it says to use ISO Recorder. Will this make the ubuntu ISO bootable? I need something that will make the ISO bootable.
[21:59] <kurrata> Rencx:  sudo gparted (default ubuntu instal didnt have it i think so you will need to instal it to)
[21:59] <fuser> brandon, rhthymic box also do well with ipod
[21:59] <bakermd> ActionParsnip: That's how you install a Linux distro automatically - you answer all the questions that setup asks in a file, as well as some other fun stuff
[21:59] <techsuperfreak> SeMi: if you burn the iso it will be bootable
[21:59] <Rencx> kurrata: ok i find it in programs ty for your help.
[21:59] <ActionParsnip> bakermd: funky, not used that
[22:00] <SeMi> Well, earlier I created a data disk with Nero :$ It wasn't bootable. But if this will work I'll give it a shot.
[22:00] <brandon__> but how am i going to spend the gift card
[22:00] <techsuperfreak> SeMi: the ubuntu iso should be bootable, that is how to install it
[22:00] <Rencx> kurrata: so what OS and file system you recomend to use?
[22:00] <guntbert> brandon__: I can not understand, whats your problem at all. Please state your question in ONE line, without pressing <enter> in between
[22:00] <nightrid3r> SeMi: burn the iso as an image
[22:00] <SeMi> Ok. Thanks guys for the help.
[22:00] <fuser> WINE
[22:00] <nyaa> !reiserfs
[22:00] <brandon__> k
[22:01] <ActionParsnip> brandon__: songbird can act like itunes too
[22:01] <w00b3> should i allow guest access on samba if i have safe LAN?
[22:01] <ActionParsnip> brandon__: as well as amarok
[22:02] <Kaznik_> hi there
[22:02] <brandon__>  any body know how download and install them because its does work on my laptop
[22:02] <Kaznik_> is there some kind of database, driver list, that i can look up my hardware in to see whether or not ubuntu ships with drivers for it?
[22:02] <Rencx> kurrata: so what OS and file system you recomend to use?
[22:03] <LargeHardonColli> pdog
[22:03] <user___> Kaznik_: hwdb.ubuntu.com
[22:03] <Mimi> Hey, my mouse media buttons worked just fine when I installed Ubuntu, but now only 2 do. How can I tell Ubuntu to *rescan* it for me? I'm SICK of trying to get it to work again
[22:03] <kurrata> Rencx:  for that external hard drive?
[22:03] <user___> Kaznik_: hmm, no
[22:04] <ActionParsnip> brandon__: sudo apt-get install songbird
[22:04] <archangelpetro> has anyone here tried to install/run xvidcap and find that it freezes?
[22:04] <ActionParsnip> brandon__: they will work on your laptop
[22:04] <Rencx> kurrata: no for my laptop
[22:04] <Azazel-AZ> How do I set a UUID number on a drive?
[22:04] <brandon__> k
[22:04] <Kaznik_> user___ :(
[22:04] <ActionParsnip> brandon__: ALL linux apps will work on your system
[22:04] <brandon__> k
[22:04] <quibbler> Kaznik_,  try here: https://wiki.ubuntu.com//HardwareSupport
[22:05] <user___> Kaznik_: http://www.ubuntuhcl.org/
[22:05] <Kaznik_> oh w00t :D
[22:05] <kurrata> Rencx:  errr, wichever you like more...in case of ubuntu you could try 1st launching it with livecd to see if all your hardware works..
[22:06] <Rencx> kurrata:  if i uderstand i cant format external hdd to NTFS with gparted
[22:06] <vigo> How do I extend or make the Ubuntu OS larger,,more space
[22:06] <archangelpetro> has anyone here tried to install/run xvidcap and find that it freezes? The ubuntu forums say that the problem is solved by enabling user permission to /dev/dsp, but that doesnt work.
[22:06] <Azazel-AZ> Anyone know how to set a blank UUID on a drive?
[22:06] <kurrata> Rencx:  evrything else but nfts no love for it in gparted ;)
[22:06] <angelo3> Ciao amici di #ubuntu !!
[22:06] <angelo3> !addon
[22:06] <ActionParsnip> vigo: shrink other partitions to make more unallocated space you can use for storage
[22:07] <guntbert> !it | angelo3
[22:07] <Rencx> kurrata:  what you recomend for ext HDD?
[22:07] <Kaznik_> w00t
[22:07] <vigo> Thank you
[22:07] <Kaznik_> all my hardware is supported
[22:07]  * Kaznik_ backs up his stuff
[22:07] <Lycus> Need some help--using 8.10, trying to boot into Ubuntu, it boots into BusyBox. Says no resume image found, what else should I be looking for/doing?
[22:07] <ActionParsnip> Rencx: almost all USB drives are supported by the kernel
[22:08] <Rencx> ActionParsnip: yes but i dont like fat32 and i need want thet one who will work on Win and Ubuntu so i think that NTFS will be good?
[22:09] <isaac_> server localhost
[22:09] <isaac_> oops, sorry... long time since I used IRC... hehe
[22:09] <ActionParsnip> Rencx: ntfs is fine, you can use ntfs3g to mount it writable
[22:09] <kurrata> Rencx:  yes nfts will be k if you want it to work on win xp + and linux
[22:09] <ActionParsnip> Rencx: the make / model of the drive has nothing to do with the file system it uses
[22:10] <promet> hello
[22:10] <nyaa> Rencx as an odd option there's always this I guess, lol http://www.fs-driver.org/
[22:10] <promet> I have a question about "noisy" tty screen
[22:10] <inertial> when i do a ./configure in ubuntu, it puts -Werror in the cflags of all the makefiles... how do i make it not put -Werror?
[22:11] <Lycus> Ubuntu 8.10 boots into BusyBox. Says no resume image found, what else should I be looking for/doing? I can't get into X.
[22:11] <nyaa> lycus: do you have grub installed?
[22:11] <Bitfish> inertial, you have to manually edit the Makefile
[22:11] <Lycus> nyaa: yes
[22:12] <inertial> Bitfish: but configure is inserting the -Werror into the makefile
[22:12] <olimpico> Can someone please tell me how to output the dmesg live to the shell?
[22:12] <promet> when I switch over to TTY 1 for instance with ctrl-alt-F1, the systems scrolls messages making the TTY hard to read and manage, is there a way to turn these messages off for all TTY screens?
[22:12] <nyaa> lycus: are ubuntu and busybox on the same partition?
[22:12] <Bitfish> inertial, yes, and Makefile calls this option, so you have to either edit the configure script, or the Makefile :)
[22:12] <Azazel-AZ> less /proc/dmesg?
[22:13] <olimpico> I'm having trouble with the diNovo Edge using intrepid
[22:13] <linxeh> promet: as in its spewing messages into the console ?
[22:13] <Lycus> nyaa: I don't know, I didn't install busybox knowingly, only did an automatic use entire disk install for ubuntu some months ago
[22:13] <Lycus> I would guess they are.
[22:13] <nyaa> lycus: so you installed busybox after ubuntu
[22:13] <promet> linxeh yeah
[22:13] <Azazel-AZ> dmseg | less
[22:13] <linxeh> promet: I think you can reconfigure syslog to stop that happening, its been a while since I bothered looking (I just use a different TTY)
[22:13] <nyaa> lycus: is that correct or no?
[22:13] <Lycus> nyaa: No, busybox boots-up right now and Ubuntu won't.
[22:13] <Lycus> I didn't install busybox, busybox is a part of Ubuntu afaik.
[22:14] <olimpico> Azazel-AZ:  That doesn't update the dmesg automatically
[22:14] <inertial> Bitfish: ah i see.. it is nothing to do with ubuntu.. rather the configure script has its own checks for whether to include -Werror..
[22:14] <nyaa> lycus: from what I'm seeing busybox is its own implemetation of linux, I'll send you a tell so I don't clog up the channel
[22:14] <promet> so linxeh, changing to different TTYs could be quiet?
[22:14] <Azazel-AZ> try this watch /whereeverdmesg file is/dmesg | tail -n 20
[22:14] <olimpico> Azazel-AZ: I need dmesg to output any new lines to the shell live
[22:14] <Bitfish> inertial, thats what i said ;)
[22:14] <Rencx> ActionParsnip, kurrata, nyaa now i will ask to all of you: Which soft is better to use base system, i can install Win with VirtualBOx an use it from linux it is one plus. But will ir run like normal Win?
[22:15] <jonaskoelker> (Error code: sec_error_reused_issuer_and_serial)
[22:15] <nyaa> rencx you don't get 3d in virtualbox or in most emulators, so if you have apps that need 3d make that the main os
[22:15] <ActionParsnip> Rencx: you wont get 3d accelleration in the virtual system
[22:15] <olimpico> Has someone used the diNovo Edge with intrepid?, it's a bluetooth keyboud with integrated mousepad.
[22:15] <kurrata> Rencx:  no you dont have directx in virtualbox but in other ways in like normal windows
[22:15] <simplenewb> Can anyone tell me why if I leave my laptop on for an hour or two the processor  suddenly jumps to 100% usage permanantly unless I reboot? I've checked the system monitor during these times and it shows nothing consuming the CPU cycles, everything remains at 0 except maybe one or two items and they only ever account for 30% or less of the usage.
[22:15] <Azazel-AZ> watch $(dmesg | tail -n 5)
[22:15] <kurrata> Rencx: - its like
[22:16] <w00b3> should i allow guest access on samba if i have safe LAN and am connected to the Internet?
[22:16]  * Kaznik_ wondered what happened to ghe good old days of fitting more data on a CD that it said on the label
[22:16] <frostburn> w00b3, only if you trust the users on your lan with the data stored on the share
[22:16]  * Kaznik_ strugles to find a CD-R with > 715meg of space on it
[22:17] <jonaskoelker> When I connect to my AP/router/switch/bridge/thingie, firefox tells me "Error code: sec_error_reused_issuer_and_serial".  How do I get around this?
[22:17] <w00b3> frostburn can it make it easier for hackers
[22:17] <ActionParsnip> olimpico: http://ubuntuforums.org/showthread.php?t=295735
[22:17] <frostburn> Kaznik_, dvds and bluray came out
[22:17] <w00b3> external hackers
[22:17] <ActionParsnip> w00b3: i wouldnt recommend it
[22:17] <frostburn> w00b3, that depends on the security of your firewall
[22:17] <frostburn> ActionParsnip, i would, if you trust your firewall
[22:17] <public> hey guys - I'm struggling. Since i upgraded to Ibex I've had massive internet problems - it's fast enough when it's going, but it's masively intermittant. everything just keep coming to a full stop. anyone heard of anything around this?
[22:17] <ActionParsnip> w00b3: if you want to give people access, make them a local account and then smbpasswd the user name
[22:17] <Kaznik_> frostburn, there's not much point wasting a 4.7 gig DVD on a 715 meg iso
[22:18] <w00b3> ActionParsnip, i cant find my domain name
[22:18] <frostburn> Kaznik_, use a flashdrive
[22:18] <ActionParsnip> frostburn: as a rule, i don't like guest accounts, too flakey
[22:18] <SlimeyPete> Kaznik_: if you're burning a CD for temporary purposes, you can burn it in Mode 2 and get ~800MB (IIRC)
[22:18] <SlimeyPete> but it won't be very fault-resistant
[22:18] <Kaznik_> ahh, that's what i was talking about
[22:19] <Kaznik_> iso recorder doesn't apear to have an option for that
[22:19] <Ansrana> what advice can you guys give to a develop who loves coding and automating tasks in linux but works in a windows environment at work (database servers, firewall,proxy server,desktop clients,etc..)
[22:19] <Kaznik_> although maybe in Settings... doh
[22:19] <ActionParsnip> public: does it act the same for all users? does the connection act the same in a different browser
[22:19] <SlimeyPete> k3b does, I think
[22:19] <Kaznik_> ah well, i found a 750meg cd-r
[22:19] <Rencx> ActionParsnip, kurrata, nyaa so how i can get 3d aceletor to play some game?
[22:19] <Azazel-AZ> olimpico: did watch help?
[22:19] <olimpico> ActionParsnip: Thanks for the link, but as you could read, that's very old, I had seen this already, but it doesn't help. I'm using Intrepid, and it works when paired, the problem is to pair it.
[22:19] <ActionParsnip> Rencx: you need the gaming system to be the host
[22:19] <w00b3> can anyone tell me how to find your domain in samba?
[22:19] <Azazel-AZ> smbtree
[22:20] <public> I've googled, but not much relavant... tried changing resolv.conf & using open source nameservers in case it was DNS that was stopping me from getting access but then found that i couldn't ping google (ort even my router) when it was down
[22:20] <kurrata> Rencx:  you can try your luck with wine launching games or play ones wich are writen in opengl
[22:20] <Azazel-AZ> should show the workgroup and machines
[22:20] <_dark__> anyone know if there is  a free portable xserver for windows available? something you can keep on your thumbdrive?
[22:20] <Rencx> ActionParsnip: is it beter to make dual boot?
[22:20] <kurrata> !wine | Rencx
[22:20] <lokieee> hi guys i installed KDE from ubuntu and the internet for some reason won't work, so i relogged into gnome and it works fine...any ideas on what I sohuld try to get it working on kde?  I'm on wireless right now
[22:20] <_dark__> other than xming :Þ
[22:21] <ActionParsnip> Rencx: if that suits your needs better, yes
[22:21] <ActionParsnip> olimpico: http://www.linuxforums.org/forum/ubuntu-help/123389-logitech-dinovo-edge-not-working.html
[22:21] <Azazel-AZ> yes: xming is free and works on windows, also works with putty -X for x forwarding :)
[22:21] <Lycus> If you're familiar with BusyBox, please help! Ubuntu 8.10 boots into BusyBox. Says no resume image found, what else should I be looking for/doing? I can't get into X.
[22:21] <SlimeyPete> _dark__: xming's the best, but cygwin also has an x-server
[22:21] <w00b3> can anyone tell me how to find your domain in samba?
[22:22] <Lucifer|VB> w00b3: try rebooting
[22:22] <Spanky_> ye ye
[22:22] <w00b3> ah
[22:22] <_dark__> SlimeyPete, portable? as in dont have to install? xming has to install afaik
[22:22] <public> found that 'network device unmanaged' was written in the NM applet, so changed nm-system-settings managed to true
[22:22] <public> Actionparsnip - whole machine - even 'ping'ing
[22:22] <Spanky_> rebooting would be the shit
[22:22] <frostburn> w00b3, don't reboot
[22:22] <Azazel-AZ> w00b3: smbtree doesn't help?
[22:22] <Rencx> kurrata: i have used Wine it suports normal programs but not some where need specefic fonts, and i dont now about games
[22:22] <Spanky_> ping no man
[22:22] <frostburn> w00b3, run the command smbtree
[22:22] <Spanky_> that sux
[22:22] <Spanky_> ping is for n00bs
[22:22] <public> ActionParsnip, took a good 5 minutes to get in here - just no connection for ages then 'Vwoomphf' i have a connection. expecting it to go down again in a minute :(
[22:22] <jussi01> !noob | Spanky_
[22:22] <gidna_> Hi
[22:23] <Lucifer|VB> WHAHAHAHA
[22:23] <ActionParsnip> olimpico: try capslock on the login screen
[22:23]  * Spanky_ will no longer post acronyms
[22:23] <ActionParsnip> public: try changing the file back and restart networking
[22:23] <Flannel> Lucifer|VB: How can we help you today?
[22:24] <glkasleg> a laptop, ubuntu 8.0 - wireless working, one day the router in the house is gone. Wireless networks in the neighbourhood show, but not the one in the house. Two other laptops in the same house (both ubuntu 8.04) can access the router. This happened in connection with an unexpected loss of electricity. What is the problem? The router or the laptop?
[22:24] <SlimeyPete> _dark__: see http://www.portablefreeware.com/?id=419  for instructions on making xming portable
[22:24] <olimpico> ActionParsnip: Thanks for the liks, but they are very old, I want infos for intrepid. The problem is that when X starts the diNovo disconnects. Then is difficult to connect it again.
[22:24] <public> ActionParsnip, the nm-systemsettings file?
[22:24] <lokieee> I thought KDE/GNOME are just window mangers, like if i had internet on GNOME wouldn't i also have it on KDE?
[22:24] <gidna_> if I do apt-ge tinstall perl I get:perl is already the newest version.
[22:24] <ActionParsnip> public: worth a try
[22:24] <olimpico> Azazel-AZ: I tried watch, but it doesn't really work
[22:24] <Lucifer|VB> Flannel: how many bits exaclty does Ubuntu use ?
[22:24] <gidna_> but the version is 5.8
[22:24] <frostburn> glkasleg, sounds like your wireless router died
[22:24] <Azazel-AZ> The spacing return feeds I know I tired it here also
[22:24] <_dark__> SlimeyPete, thanks, i'll take a look :)
[22:25] <Flannel> Lucifer|VB: twelve.  Is there something else you actually need help with today?
[22:25] <kurrata> lokieee:  yes you would
[22:25] <ActionParsnip> olimpico: the age is moot, the man page for the cp man page is documented as January 2008 but still stands
[22:25] <glkasleg> frostburn: yes, I agree, but two other laptops, can access it?
[22:25] <Rencx> ActionParsnip, kurrata, ok, next i want to now what you recomend use from linux OS now i using Ubuntu installed with Wubi i uderstand thet i need cleen Ubuntu install becaus swap load takes like 5 minutes on start.. so i will make cleen install
[22:25] <SlimeyPete> _dark__: there's a comment about a bat file towards the bottom which is probably important
[22:25] <lokieee> kurrata but it doesn't work! >_<;;
[22:25] <public> ActionParsnip, am on it - but before i changed it it was much worse... if I go - i'll be back ;)
[22:25] <Lucifer|VB> Flannel: its not 12, tell me please
[22:26] <quibbler> Lycus, don't know if this will help but have a read: http://ubuntuforums.org/showthread.php?t=536850
[22:26] <aled> hi, Just installed Ubuntu, and enjoying it so far, but can someone suggest where in the filesystem shared files should be stored e.g. music, docs etc. which are shared between users not really appropriate for home
[22:26] <ActionParsnip> olimpico: you could maybe find entrys for xorg.conf so that its configured there
[22:26] <glkasleg> frostburn: may it be a blocking on the laptop for this actual router?
[22:26] <Slart> aled: google for linux file hierarchy.. there is a good page somewhere about that
[22:26] <Slart> aled: my guess would be /usr/shared or similar
[22:27] <olimpico> ActionParsnip: The two links you gave me where from ubuntu 7.X and they couldn't even make it work. My problem is to pair it. I have to try sometimes for minutes, then it works perfectly
[22:27] <frostburn> glkasleg, i doubt it, you should be picking up the SSID regardless of any blocking done on the access point
[22:27] <ActionParsnip> olimpico: here is a xorg.conf entry you could try: http://www.opcommando.com/?p=54
[22:27] <travisman26> guys
[22:27] <travisman26> how do i log in on another account on noip2
[22:27] <ActionParsnip> olimpico: or this: http://ubuntuforums.org/showthread.php?t=774788
[22:27] <HDAPS> Hi, just wondering if there is anyway to confirm that Disk Head Parking is enabled? "hdaps-gl" shows only a static image (kernel 2.6.28 on 9.04)
[22:28] <ActionParsnip> olimpico: otherwise im unsure
[22:28] <travisman26> how do i change the loged in user on noip2
[22:28] <cyka> guys another thing
[22:28] <glkasleg> frostburn: what I don't understand is why two other laptops pick up the SSID, but not this one....
[22:28] <Slart> aled: here it is.. http://tldp.org/LDP/Linux-Filesystem-Hierarchy/html/index.html
[22:28] <travisman26> guys
[22:28] <ActionParsnip> travisman26: do you mean change the account settings?
[22:28] <frostburn> glkasleg, are you using any sort of ndiswrapper?  You may want to pop in an ubuntu live cd and see if it's picking it up there
[22:28] <travisman26> no
[22:28] <travisman26> like
[22:28] <travisman26> insted of
[22:28] <travisman26> being loged on as travisman26
[22:29] <travisman26> i wana be loged on as travisman28
[22:29] <ActionParsnip> travisman26: ease up on the enter key dude
[22:29] <travisman26> on noip2
[22:29] <aled> slart: thanks I had done /usr/shared seems to be for read only stuff
[22:29] <Slart> aled: ah.. that might be true..
[22:29] <travisman26> so do you know how i can do that
[22:29] <promet> when I switch over to TTY 1 for instance with ctrl-alt-F1, the systems scrolls messages making the TTY hard to read and manage, is there a way to turn these messages off for all TTY screens?
[22:30] <travisman26> can u answere me
[22:30] <ActionParsnip> travisman26: i have a no-ip account myself.. Do you want to run the no-ip client as another user?
[22:30] <Rencx> ActionParsnip, kurrata, ok, next i want to now what you recomend use from linux OS? now i using Ubuntu installed with Wubi i uderstand thet i need cleen Ubuntu install becaus swap load takes like 5 minutes on start.. so i will make cleen install
[22:30] <cyka> how do i install .run file?
[22:30] <travisman26> yes
[22:30] <travisman26> exactly
[22:30] <ActionParsnip> travisman26: dude i cant type that fast, dont start bothering me if i take more than 3 seconds to reply
[22:30] <cyka> is it the "install xxx.run command?
[22:30] <travisman26> its for my website
[22:30] <ActionParsnip> cyka: chmod +x <binfile>
[22:30] <glkasleg> frostburn: good suggestion - It's a pavillion 6000 - think it's a broadcom card - do you know if that's using ndiswrapper?
[22:31] <olimpico> ActionParsnip: Thanks, maybe the entries on Xorg may help, everything works onces is paired. the problem is to pair them after X starts
[22:31] <ActionParsnip> travisman26: let me websearch]
[22:31] <travisman26> sorry action
[22:31] <travisman26> ok ty
[22:31] <cyka> so i would do chmod +x then drag the file?
[22:31] <aled> would just making a new directory, say /files or /data be appropriate?
[22:31] <frostburn> glkasleg, not aware of what card, my pavillion was a 9000 and had intel.  be careful not to let your laptop overheat btw!
[22:31] <frostburn> cyka, what exactly are you installing, there should be install instructions provided
[22:31] <quibbler> cyka, http://ubuntuforums.org/showthread.php?t=239797
[22:32] <cyka> wolfenstien enemy territory
[22:32] <[TK]D-Fender> Hello all, quick Q : In gnome-terminal, how do I actually disable a keyboard shortcut?
[22:32] <nyaa> glkasleg the hp's generally vary between intel and broadcom iirc
[22:32] <HDAPS> Hello! Was wondering if there is anyway to confirm that Disk Head Parking is enabled? "hdaps-gl" shows only a static image (kernel 2.6.28 on 9.04)
[22:33] <ActionParsnip> travisman26: try: sux travisman28 noip2
[22:33] <frostburn> aled, check out http://en.wikipedia.org/wiki/Filesystem_Hierarchy_Standard   You can also create a user account named shared that is accessible to everyone as well
[22:33] <travisman26> ok
[22:33] <jussi01> HDAPS: #ubuntu+1 for 9.04 help
[22:33] <lupus1> how can i run a hdd recovery tool from the ubuntu livecd
[22:33] <glkasleg> frostburn: you scare me - I've installed this on a friends laptop
[22:33] <Slart> aled: well.. I've browsed through that page and the only places I can think of is some mounted folder in the users home folder .. or a folder in /mnt or /media... myself I mount my shared stuff in /media
[22:33] <frostburn> cyka, you should be able to chmod + installfile.run    and then run it ./installfile.run
[22:33] <travisman26> action nope
[22:33] <HDAPS> ok thanks, not really 9.04 specific but ill try there :)
[22:33] <noel> algun canal para el warzone 2100 resurrection
[22:33] <travisman26> it dont work it says
[22:34] <travisman26> the program sux is not installed
[22:34] <nivi> it
[22:34] <frostburn> glkasleg, my last pavillion died a glorious death, artifacts in the bios screen
[22:34] <ActionParsnip> travisman26: sudo apt-get install sux
[22:34] <stabler> cant anyone help me with a printing issue?
[22:34] <wolter> hi, i want to adjust the sensibility of my touchpad, and i understand that i have to edit my xorg.conf in order to enable that feature. What i don't understand is what to put where, for the forums are a bit confusing because everybody posts something different.
[22:34] <travisman26> ok
[22:34] <yellowtape> Hey all. Any idea why ubuntu would be playing moies in black and white? Totem and mplayer do the same. But mplayer doesn't stream, it just sits on one frame, I can skip forward, but not play. Here's the output from mplayer firing up -> http://rafb.net/p/9O2R3S88.html
[22:34] <ActionParsnip> noel: espaniol?
[22:34] <glkasleg> frostburn: How do I prevent it from overheat?
[22:35] <ActionParsnip> !codecs | yellowtape
[22:35] <travisman26> dididnt know if i should install it
[22:35] <Slart> aled: it's really up to you but I would put it in /mnt or /media .. but it's really up to you.. nothing will break if you create a folder in the root folder..
[22:35] <ActionParsnip> travisman26: neither did i, im just websearching
[22:35] <frostburn> glkasleg, always make sure the fan is uncovered, dont use the laptop on a blanket or anything
[22:35] <stabler> *can anyone help me with a printing issue/
[22:35] <Slart> aled: you'll only start breaking things if you mess with already existing folders
[22:35] <Lycus> How can I run a HDD recovery tool from the Ubuntu LiveCD?
[22:35] <travisman26> action
[22:35] <travisman26> is says unknown id
[22:35] <glkasleg> frostburn: OK - I understand it hasn't anything to do with what OS it's on it?
[22:35] <maxbaldwin> Are there any terminal based wifi clients? like networkmanager for the Command Line Interface?
[22:36] <travisman26> for whatever i type
[22:36] <ActionParsnip> !recovery | Lycus
[22:36] <yellowtape> ActionParsnip: Ah, thanks.
[22:36] <Slart> Lycus: just like you would run it from an installed system
[22:36] <frostburn> glkasleg, nope, unrelated
[22:36] <public> ActionParsnip, well... wierd. set nm-system-setings-aplet to managed=false & restarted networking - lost all conection.  turned it back on (& restarted) restart told me ifup's disabled (because managed=true) so set it back to false and have connection.... is there any way to get the machine to monitor it for the night so I can sleep?
[22:36] <jedi06> is this the right syntax for a hash of arrays %month = ('Jan' => (0,31),'Feb' => (1,28) ...)
[22:36] <glkasleg> frostburn: puhh
[22:36] <yellowtape> Strange how the thumbnails are in colour
[22:36] <Slart> jedi06: in what language?
[22:36] <ActionParsnip> travisman26: hmm
[22:36] <jedi06> oops perl
[22:36] <Cyber_Hades> Hi 4 all. It's me again. It is possible to have ICS and CLUSTER together in LAN ?
[22:36] <Azazel-AZ> olimpico: I wrote a small shell script to do exactly what you need
[22:36] <Lycus> Slart, ActionParsnip: Can I not do it from the regular LiveCD?
[22:36] <travisman26> noip needs to make it more userfriendly
[22:36] <travisman26> the company
[22:36] <travisman26> like the windows version has interface
[22:37] <olimpico> Azazel-AZ: tail -f /var/log/messages
[22:37] <techsuperfreak> travisman26: have you tried changing the username/pass in the no-ip2.conf?
[22:37] <Slart> jedi06: this isn't really a perl help channel.. if you don't get an answer you might want to try #perl or ##perl.. or even one of the gazillion perl tutorials that are available on the net
[22:37] <wolter> can anybody help me with gsynaptics in my xorg.conf?
[22:37] <jcarroll> how do you grant user access to /dev/tty10?
[22:37] <ActionParsnip> travisman26: http://www.linuxquestions.org/questions/linux-general-1/execute-command-as-different-user-63197/
[22:37] <jcarroll> Tried to just change permissions but didn't work
[22:37] <Cyber_Hades> wolter : tell your problem
[22:37] <aled> Slart: yeah, exactly. it seems to me the file hierarchy std only relates to the os side of stuff
[22:38] <Slart> Lycus: depends on what kind of recovery you want to do.. but usually you can recover stuff from the regular live cd
[22:38] <olimpico> Azazel-AZ: or watch "dmesg | tail", but the first one is better
[22:38] <ActionParsnip> travisman26: you can run the windows app via wine (I do)
[22:38] <Cyber_Hades> Hi 4 all. It's me again. It is possible to have ICS and CLUSTER together in LAN ?
[22:38] <Lycus> Slart: I want to check my HDD for errors etc.
[22:38] <travisman26> action i would rather do it normaly
[22:38] <dotblank> Help how do I prevent screen tearing?
[22:38] <travisman26> the linux way
[22:38] <Azazel-AZ> see shell script I pmed you :P
[22:38] <Lycus> Slart: Ubuntu will only boot into BusyBox, so I suspect it's a HDD error.
[22:38] <ActionParsnip> Cyber_Hades: should be fine
[22:38] <Cyber_Hades> Ok tnx !
[22:38] <ActionParsnip> travisman26: wine is a linux app
[22:38] <travisman26> bcuz i want to learn as much as  i can
[22:38] <Slart> aled: yes, you might want to pay more attention to it if you're writing software yourself.
[22:38] <travisman26> still
[22:38] <travisman26> wine is windows way
[22:38] <travisman26> not linux way
[22:38] <wolter> Cyber_Hades, i want to change the sensibility of my touchpad, so i installed the gsynaptics touchpad thing, yet i have to modify the xorg.conf to start it , and i don't know how to...
[22:38] <Slart> Lycus: sure.. fsck will work from a live cd
[22:38] <Azazel-AZ> ./trythis.sh num_of_lise_to_show is syntax
[22:38] <olimpico> Azazel-AZ: Thanks a lot for your help, thanks to it I figured out the watch "dmesg | tail"
[22:39] <ActionParsnip> travisman26: its a linux app, you can't run wine on windows
[22:39] <Slart> ActionParsnip: actually I think you can =)
[22:39] <digitalvaldosta> hello. I know this is not the right chat room for this, but can someone tell me where to go to find a script that will allow me to have a div that starts in its actual position but then when you scroll past it, it follows you?
[22:39] <travisman26> idc
[22:39] <olimpico> Azazel-AZ: Then someone in another channel told me about: tail -f /var/log/messages which is better
[22:39] <travisman26> its still the way windows works
[22:39] <ActionParsnip> Slart: its kinda pointless but i guess you could compile it
[22:39] <travisman26> i am sick of windows
[22:39] <Cyber_Hades> Sorry... i do not have expiriance in that...
[22:39] <travisman26> i want to learn commands
[22:39] <LorgonJortle> Hey everyone. I have been through all of the linux basics tutorials, and know my way waround. What next? I want to know as much as I possibly can about Linux.
[22:39] <Cyber_Hades> :((
[22:39] <Azazel-AZ> script is works too ;)
[22:39] <Azazel-AZ> lol
[22:40] <ActionParsnip> travisman26: its just running a windows app via an abstraction layer, you dont install windows when you install wine
[22:40] <Slart> ActionParsnip: there is even a version for download =) http://wiki.winehq.org/FAQ#head-530da6f64d194f2b403411016ab937e60d3c2c1c
[22:40] <ActionParsnip> travisman26: i'll admin the native client would be nicer but i simply couldnt get it to go and the windows app worked so i stuck with it
[22:40] <Lycus> Slart: How do I use fsck?
[22:40] <user___> LorgonJortle: work through the LPIC1 stuff
[22:40] <travisman26> i exspect to learn by using linux and learn how it woks and learn commands
[22:41] <travisman26> i h8 windows i know it dont install windowsim not stupid
[22:41] <Slart> Lycus: I'm going to teach you something else.. how to use a man page
[22:41] <ActionParsnip> Slart: nice, it is kinda moot though. made me laugh
[22:41] <digitalvaldosta> http://www.ubuntu.com/training/e-learning , LorgonJortle
[22:41] <boingOo> Lycus: man fsck
[22:41] <andriu> hi all
[22:41] <ActionParsnip> travisman26: i assume nothing here
[22:41] <travisman26> ?
[22:41] <travisman26> wtf
[22:41] <travisman26> w/e
[22:41] <andriu> I'm poland
[22:41] <travisman26> im leaving
[22:41] <travisman26> action ur anoying
[22:41] <Slart> Lycus: almost all commands in linux comes with a manual describing how to use them.. you can access this by writing "man <commandname>" in a terminal.. so to get information on fsck you would write "man fsck"
[22:42] <andriu> są tu polacy??
[22:42] <ActionParsnip> handbags at 20 paces
[22:42] <Flannel> !pl | andriu
[22:42] <Lokiase> hello all, does anyone know if google chrome is working in ubuntu?
[22:42] <Flannel> -bbbb *!*@97.82.240.254 *!*@CPE0010dc6975af-CM001a66830aa6.cpe.net.cable.rogers.com *!*@55.103.205.68.cfl.res.rr.com *!*@athedsl-109543.home.otenet.gr
[22:42] <booxter> hello guys! has anyone experienced such problem with gnome kbd applet? http://www.flickr.com/photos/34551308@N07/3213158529/
[22:42] <Flannel> blah
[22:42] <Flannel> Sorry for the noise
[22:42] <andriu> jak wejść na to #ubuntu-pl?
[22:42] <digitalvaldosta> hello. I know this is not the right chat room for this, but can someone tell me where to go to find a script that will allow me to have a div that starts in its actual position but then when you scroll past it, it follows you?
[22:43] <Slart> andriu: english.... we speak english here..
[22:43] <Flannel> digitalvaldosta: Try #css and/or #javascript
[22:43] <public> ActionParsnip, seems ok now... will try it for a bit. Thanks man....
[22:43] <public> ;)_
[22:43] <ActionParsnip> Lokiase: you can install this: http://www.codeweavers.com/services/ports/chromium/
[22:43] <andriu> ok how enter to #ubuntu-pl??
[22:43] <digitalvaldosta> thanks, Flannel
[22:43] <booxter> on the screenshot, I effectively have 'by(winkeys)' (Belarusian) layout though 1) it's shown as ?? 2) has English tip
[22:43] <Flannel> andriu: /join #ubuntu-pl
[22:43] <rww> andriu: type /join #ubuntu-pl
[22:43] <Slart> andriu: type /join #ubuntu-pl   to go to the polish channel
[22:43] <ActionParsnip> Lokiase: its not a native app yet
[22:43] <Lycus> Slart: The LiveCD didn't mount my computer's HDD.
[22:43] <andriu> i have got xchat
[22:43] <kurrata> andriu:  /join  #ubuntu-pl
[22:43] <Slart> Lycus: it doesn't show up in nautilus ?
[22:44] <andriu> thx
[22:44] <rww> Lokiase: Chromium doesn't work well yet. They're working on it, though
[22:44] <Lokiase> so no google chrome for me?
[22:45] <horstle> n8
[22:45] <Lycus> Slart: Unable to mount, DBus error, etc.
[22:45] <yakuz> Not often but sometimes my compiz sort of crashes and I can't use my corners to expose and scale. How can I restart it?
[22:46] <ActionParsnip> Lokiase: you can install the .deb which will install it but its the win version with wine like stuff
[22:46] <ActionParsnip> Lokiase: are you 64 bit or 32 bit?
[22:46] <Slart> Lycus: huh? never seen that before.. but you don't have to mount it to check it.. in fact you shouldn't mount it
[22:46] <Lokiase> ActionParsnip: 32
[22:46] <ActionParsnip> Lokiase: http://media.codeweavers.com/pub/crossover/chromium/cxchromium_0.9.0-1_i386.deb
[22:47] <ortsvorsteher> ActionParsnip: at last i had a problem with compiz and config for my nvidia card. i had forgotten to deinstall xserver-cgl. now is solved. thx again for your help :)
[22:47] <Lokiase> ActionParsnip: insnt it a better option to choose firefox?
[22:47] <Lycus> Slart: Would it be fsck /dev/hda1/ ?
[22:47] <Slart> Lycus: just find out what the drive is called... /dev/sda3 , /dev/sdc2  or something like that.. you can use gnome partition editor to look at drives
[22:47] <ActionParsnip> Lokiase: Absolutely not! This is just a proof of concept, for fun, and to showcase what Wine can do. Chromium itself is just beginning. As the Chromium project progresses, they will be providing more compelling support for Mac OS and Linux, particularly with process security and memory management. Those future versions from Chromium will be better suited for daily use than this version
[22:47] <nyaa> I like to load my firefox on a self made ramdrive, then its fast =)
[22:47] <ortsvorsteher> !cookie > ActionParsnip
[22:48] <Slart> Lycus: ubuntu doesn't use the /dev/hdXn notation anymore.. all drives use the scsi interface so it's /dev/sdXn instead
[22:48] <ActionParsnip> Lokiase: i prefer opera, but if you like firefox then use it
[22:48] <ActionParsnip> ortsvorsteher: thanks :D
[22:48] <ortsvorsteher> :)
[22:48] <Lokiase> ActionParsnip: so you advice opera?
[22:49] <ActionParsnip> Lokiase: there are a tonne of browsers, try a few. seem people just install firefox and stop
[22:49] <wolter> how do i change the sensitivity of my touchpad?
[22:50] <actionshrimp> ActionParsnip ??
[22:50] <actionshrimp> madness
[22:50] <ActionParsnip> wolter: http://strabes.wordpress.com/2006/11/04/change-touchpad-sensitivity-in-ubuntu/
[22:50] <ActionParsnip> actionshrimp: yeah man, nice to see a fellow superhero
[22:50] <nyaa> I'm supervillain though
[22:51] <nyaa> I can advise people slightly wrongly with mistakes that can't possibly be traced over the internet!
[22:51] <ActionParsnip> nyaa: the channel is logged
[22:51] <ActionParsnip> !log
[22:51] <wolter> ActionParsnip, I have no such sections.... My xorg conf only has things about my video card, monitor, and screen. nothing else.
[22:51] <Lokiase> ActionParsnip: I cannot find Opera in the list...
[22:51] <ActionParsnip> !opera | Lokiase
[22:52] <ActionParsnip> wolter: then add some
[22:53] <ActionParsnip> wolter: there may be an option in mouse settings
[22:53] <Izinucs> !flash
[22:53] <wolter> ActionParsnip, no, there isn't.
[22:53] <bakermd> I am installing unattended - and the default language is NOT english!  When I go to log in, it looks like some Indian language!  How can I tell the install English Only?
[22:53] <public> ok... ActionParsnip - i have the same problem - as soon as i said thanks it went offline again :(     ---- I've seen a few otheres have similar probs, but no solutions. It's only since ibes upgrade ( i think) and is the same whether nm-applet-conf has settings to managed true or false. any other ideas?
[22:53] <public> or anyone else, come to that ^^^
[22:53] <public> ?am i still in here?
[22:53] <nyaa> here's an interesting comparison of a few popular web browsers
[22:53] <nyaa> http://www.ghacks.net/2007/09/27/firefox-vs-opera-vs-internet-explorer/
[22:53] <Lokiase> ActionParsnip: I have installed ubuntu interprit ipex (or somehting like that :)) and then the kubuntu desktop, but I cannot find Opera
[22:54] <ActionParsnip> Lokiase: read the guide. it tells you how to instal it
[22:54] <DIFH-iceroot> how to start a c-source-file directly from the shell? gcc test.c should return "hello world" but it is only working with gcc -o test test.c and then ./test
[22:55] <ActionParsnip> DIFH-iceroot: you can make a list of commands with &&s in between
[22:55] <Flannel> DIFH-iceroot: You have to compile, then run it.  There's no way to do it all in a single command.  (Unless your single command is gcc -o test test.c && ./test)
[22:55] <Slart> DIFH-iceroot: ehm.. you don't run c-files "directly from the shell".. if you want to do that you use python or something
[22:55] <ActionParsnip> DIFH-iceroot: gcc tect.c -o test && ./test
[22:56] <geonikus2534> ..
[22:56] <DIFH-iceroot> ok thanks, that sounds ok, i mean something like kdevelop does, klick "run" and there is my string "hello world" but the command with && is ok too
[22:56] <Slart> DIFH-iceroot: gcc test.c only compiles the c-file into an executable
[22:57] <nyaa> have a good day!
[22:57] <Flannel> DIFH-iceroot: First kdevelop compiles (if needed), then runs it
[22:57] <DIFH-iceroot> Flannel: so kdevelop is using something like gcc -o test test.c && ./test
[22:58] <Flannel> DIFH-iceroot: For our purposes, yes.
[22:58] <SmokeyD> hey people. I still haven't solved the problem with login and permissions. somehow I don't have a+w on ~ and ~/.dmrc
[22:58] <Slart> DIFH-iceroot: you can combine several commands on the command line to make it run the generated executable.. but if you're thinking of learning programming I suggest you read up on what a compiler does..
[22:58] <SmokeyD> but gnome still complains when logging in
[22:58] <SmokeyD> I already created another user and login using that one, and it works fine
[22:58] <public> this is ridiculous - I'm on and off the network constantly - is there any way to revert BACK to hardy?
[22:59] <DIFH-iceroot> Slart: i just though gcc can something like compile and run with one command
[22:59] <SmokeyD> I tried to find -type f -exec chmod 644 '{}' \;
[22:59] <SmokeyD> and the same with 755 for dirs, but no luch
[22:59] <SmokeyD> I am really baffled what is wrong
[22:59] <cwillu> use +X instead of +x!
[22:59] <Slart> DIFH-iceroot: that's not usually something you want to do.. so I doubt there is such a function
[22:59] <DIFH-iceroot> Slart: Flannel ActionParsnip thank you
[23:00] <ActionParsnip> SmokeyD: try sudo chown -R <username>:<username> /home/<username>
[23:00] <Slart> DIFH-iceroot: as you saw from the other responses it's pretty easy to make a script if you really want to do it
[23:00] <slew> hello, does ubuntu have a built in firewall?
[23:00] <Slart> !firewall | slew
[23:00] <Flannel> slew: Yes
[23:00] <DIFH-iceroot> Slart: ufw
[23:00] <Slart> DIFH-iceroot: you're welcome
[23:01] <karsten> What JRE does OOo want?
[23:01] <Slart> karsten: I use the jre from sun.. haven't run into any problems
[23:01] <karsten> I just installed sun-java6-jre and OOo is still bitching at startup about not finding a JRE.
[23:01] <slew> thanks Slart, Flannel
[23:02] <karsten> javaldx: Could not find a Java Runtime Environment!
[23:02] <karsten> ^^ is the error message.
[23:02] <ActionParsnip> !java
[23:02] <SmokeyD> ActionParsnip: already did
[23:02] <Slart> karsten: hmm.. isn't there somewhere in openoffice you can chose which jre to use?... can't really remember
[23:02] <SmokeyD> sorry for the delay
[23:03] <karsten> Slart: NFC.  Googling.
[23:03] <Decepticon> anyone know a script/tool to convert kismet-style .xml file to google earth-style kml file besides kisgearth.pl?
[23:03] <Lycus> Slart: I get a short read drive error, http://pastebin.com/m2d2eaafe
[23:03] <ActionParsnip> karsten: install  java-gcj-compat | openjdk-6-jre | sun-java5-jre | sun-java6-jre
[23:04] <Slart> Lycus: see if there is an option to check for bad blocks.. use that
[23:04] <wolter> when i try to load gspca i get "FATAL: Module not found"... help?
[23:04] <lokieee> I was having issues getting adobe flash plug-in to work, I can see videos and things but there is no sound. any ideas on what I can do
[23:04] <karsten> ActionParsnip: I've got sun-java6-jre installed.  That's an "OR"ed statement, right?
[23:04] <ActionParsnip> karsten: yeah, hmm
[23:05] <kriston> Could someone explain how to improve GNOME performance under Xvnc4 in Ubuntu?  It's extremely slow compared to gutsy and Fedora.
[23:05] <karsten> ActionParsnip: Checking in OOo for JRE settings.
[23:05] <rww> kriston: do you have compiz/destop effects enabled? if so, try disabling it
[23:06] <ActionParsnip> karsten: try: export JRE_HOME=/usr/lib/jvm/java-6-sun/jre/
[23:06] <ActionParsnip> karsten: then lauch OOo from the same terminal
[23:07] <[p]Zombie> i need my LD_LIBRARY_PATH variable permanent - tried /etc/environment but that seems to work only when loging out and reloging in, but not after a new restart
[23:07] <kriston> rww: No, it's a vanilla session, no compiz or friends.  I've been using realvnc for several years and this is a known problem, hoping someone knew more about it here.
[23:07] <[p]Zombie> where can i place the LD_LIBRARY_PATH definition to be permanent and available at each new start?
[23:07] <ActionParsnip> karsten: try file /usr/local/bin/java
[23:07] <ActionParsnip> karsten: does it output anything?
[23:07] <kriston> Getting realvnc to work at all in Ubuntu is a big headache, also had to disable keyboard handling and "Gnome Do"
[23:08] <karsten> ActionParsnip: Nope
[23:08] <karsten> ActionParsnip: Or trather, same warning.
[23:08] <ActionParsnip> karsten: that it doesnt exist?
[23:09] <ge0rge007> hello !
[23:09] <ActionParsnip> !hi | ge0rge007
[23:09] <ge0rge007> hello from Greece:)
[23:09] <ge0rge007> than you!
[23:09] <ge0rge007> thank*
[23:09] <karsten> ActionParsnip: It exists, it's a path.
[23:09] <ActionParsnip> karsten: do you mean a link?
[23:09] <[p]Zombie> will defining LD_LIBRARY_PATH in .profiles make it available at each start?
[23:09] <karsten> ActionParsnip: : test -d "$JRE_HOME" && echo OK || echo nope
[23:10] <karsten> ActionParsnip: ... says yes.
[23:10] <humbolt> What is the status of pulseaudio and flash in intrepid?
[23:10] <ActionParsnip> karsten: where is it a link to?
[23:10] <Gnea> !grub
[23:10] <karsten> ActionParsnip: No, not a symlink, a path.
[23:10] <Gnea> meh..
[23:10] <humbolt> Does this work without padsp and libflashsupport now?
[23:10] <shameless> does anyone know of any programs that can actively mirror the display horizontally?
[23:10] <ActionParsnip> karsten: run the command: file /usr/local/bin/java
[23:10] <ActionParsnip> karsten: what is the output?
[23:10] <Gnea> humbolt: seems to work fine, although not always out-of-the-box
[23:10] <Slart> shameless: for use with a back projektor, kind of ?
[23:11] <shameless> or how i might be able to go about changing the inputs to mirror like that
[23:11] <zendo> Hi. Few days ago I installed kde-4 on Kubuntu 8.04, and uninstalled it little after, but then when I start linux X doesnt start. I need to type "sudo kdm" manually to get display. Can someone please tell em how to fix (restore to previous state) this?
[23:11] <shameless> slart: angle projector, yeah, display pointed up, mirror in front
[23:11] <karsten> ActionParsnip: which java: /usr/bin/java
[23:11] <karsten> ActionParsnip: .. and no, /usr/local/bin/java doesn't exist.
[23:11] <WeggTop> Is it possible to upgrade a 6.10 install with the latest 8.10?
[23:11] <Slart> shameless: hmm.. thought I saw something in the nvidia settings.. hang on.. let me look
[23:11] <karsten> zendo: KDE4 isn't really usable at this point IMO.
[23:11] <wolter> i get "FATAL: Module gspca not found." when i try to modprobe gspca
[23:12] <shameless> slart: yeah, i've come across the old nvidia driver thing, problem is it's going in one of the new eeeboxes
[23:12] <Gnea> !pulseaudio
[23:12] <Gnea> humbolt: check that link from ubottu out ^^^
[23:12] <zendo> karsten: yes, but I uninstalled kde4, and now everytime I start Linux I must type "sudo kdm" to get X started.
[23:12]  * public is massively dissapointed in Ibex not working in something as fundamental as network connections and wonders why it was realeased if it's not ready...?
[23:13] <Slart> shameless: xrandr can't do it?
[23:13] <karsten> zendo: Try uninstalling kdm and reinstalling gdm
[23:13] <shameless> slart: not sure, haven't checked
[23:13] <ActionParsnip> karsten: perfect
[23:13] <shameless> slart: it's for a project of my crazy ass brother
[23:13] <Gnea> public: it's not an LTS release.
[23:13] <ActionParsnip> karsten: what is the output of: file /usr/java/j2re1.4.2_04/bin/java
[23:13] <Gnea> public: also, it works just fine with network connections. perhaps you're not doing it right... what's the problem, exactly?
[23:14] <humbolt> Gnea: that document does not tell me about the current status of pulseaudio in intrepid
[23:14] <zendo> karsten: would "dpkg-reconfigure kdm" help?
[23:14] <humbolt> Gnea: I know the rest
[23:14] <[p]Zombie> will defining LD_LIBRARY_PATH in .profiles make it available at each start?
[23:14] <ActionParsnip> karsten: replace the version number with your java version
[23:14] <karsten> ActionParsnip: ?
[23:14] <public> Gnea does that mean it's not stable?
[23:14] <[p]Zombie> where can i place the LD_LIBRARY_PATH definition to be permanent and available at each new start?
[23:14] <Gnea> !LTS | public
[23:14] <public> Gnea does that mean it's not stable?
[23:14] <Gnea> !repeat | public
[23:14] <ActionParsnip> karsten: if your java version is different you will need to use different numbers in the command
[23:15] <Gnea> public: it's akin to the debian way of releasing - there's always a stable, a testing and an unstable release
[23:15] <ActionParsnip> karsten: so a better command would be: /usr/java/j2re <then press tab here to autocomplete>
[23:15] <Gnea> public: the LTS are the stable versions.
[23:15] <karsten> shameless: You have an ass brother?  i've heard of blood brothers, but this sounds *really* painful.
[23:15] <ActionParsnip> karsten: then add /bin/java to the command
[23:15] <public> Gnea - sorry - my connection is so bad, and my entries are greyed out - i didn't think they were getting through
[23:15] <karsten> action	No suck file
[23:15] <karsten> ActionParsnip:  /usr/java doesn't exist.  /usr/
[23:15] <karsten> share?
[23:15]  * karsten lags badly.
[23:15] <gogereaver> Gnea lts = long term support
[23:15] <Slart> shameless: it seems like xrandr can do all sorts of weirdness.. inverting axis, flipping up/down/right/left, rotating etc etc
[23:16] <linxeh> ActionParsnip: /usr/lib/jvm/ for java usually
[23:16] <Gnea> public: greyed out? what irc client are you using?
[23:16] <gogereaver> Gnea all linux is more stable then windows even alpha lol
[23:16] <public> Gnea - that's really dissapointing.
[23:16] <Gnea> gogereaver: you miss the point.
[23:16] <ActionParsnip> karsten: i know, youu said. i want to know if a different java folder exists
[23:16] <Slart> shameless: if you can it to work with your graphics card that would probably do it
[23:16] <humbolt> Do I need to set FIREFOX_DSP when using alsa instead of pulseaudio?
[23:16] <karsten> ActionParsnip: Give me a while to hunt around.  BBL.  Thanks for help.
[23:16] <linxeh> karsten: /usr/lib/jvm/....
[23:16] <Gnea> public: well, it sounds like you're holding a grudge for a simple problem that any one of us could help you solve within 5 minutes.
[23:16] <ActionParsnip> karsten: file /usr/java/j2re<your java version goes here>/bin/java
[23:16] <ActionParsnip> karsten: http://www.oooforum.org/forum/viewtopic.phtml?t=14629
[23:17] <linxeh> ActionParsnip: thats not where ubuntu/debian put it
[23:17] <karsten> ActionParsnip: Thanks, reading.
[23:17] <nbeebo> how to add new user?
[23:17] <ActionParsnip> linxeh: im just reading that forum on the OOo forum
[23:17] <ActionParsnip> !adduser | nbeebo
[23:17] <theczar> I was wondering where exactly I need to input my virtual host tags in my httpd.conf file for Apache (LAMPP setup)
[23:17] <gogereaver> nbeebo adsusr
[23:18] <nbeebo> thanks
[23:18] <gogereaver> nbeebo addusr
[23:18] <linxeh> ah :o
[23:18] <throughput> hi
[23:18] <Gnea> gogereaver: 8.04 is in LTS and will receive support and updates for the next 3-5 years, it's stable. 8.10 is NOT LTS and will be forgotten about in April, when 9.04 is released.
[23:18] <throughput> i have a little problem
[23:18] <throughput> the audio is k.o.
[23:18] <public> and it's very dissapointing that that's not mentioned anywhere in the download pages
[23:19] <Gnea> what's even more disappointing is your attitude.
[23:19] <Gnea> oh, it left.
[23:19] <throughput> but this mornig it functioned!
[23:19] <Mimi> histo, is there a dock like awn, that I can put on the left or right, but not crazy like cairo
[23:19] <theczar> I was wondering where exactly I need to input my virtual host tags in my httpd.conf file for Apache (LAMPP setup)
[23:20] <Flannel> theczar: In the debian method of configuration, they go in /etc/apache2/sites-available/ which then get symlinked to sites-enabled to enable them (via a2ensite)
[23:20] <Mimi> theczar, you might want to check at #ubuntu-server
[23:20] <irpapabear> hello all
[23:20] <ActionParsnip> theczar: /etc/apache2 or /etc/apache (if you arent running apache2)
[23:20] <throughput> I listena a little brrrzzz
[23:20] <shameless> slart: well, it worked
[23:21] <shameless> it locked up my keyboard and screen, but it flipped first
[23:21] <jonhjonhz> hola alguien sabe como configurar proftpd?
[23:21] <Mimi> !es | jonhjonhz
[23:21] <shameless> well, not the screen. i could see the mouse move, but things weren't responding
[23:21] <Onidem> Can anyone help me get back into the GUI? Every time i boot im stuck in console
[23:21] <jonhjonhz> sorry
[23:21] <Mimi> its ok :)
[23:21] <gogereaver> shameless heh
[23:21] <Slart> shameless: oh.. well.. what would life be without a little struggle =)
[23:21] <ActionParsnip> Onidem: kdm start
[23:21] <shameless> xranr -x
[23:21] <kitche> Onidem: startx or gdm or kdm
[23:21] <shameless> xrandr -x *
[23:22] <mrinehart93> hey guys... are the Ubuntu forums down or something?
[23:22] <shameless> slart: at least i can rub it in his face that linux is better than windows, yet again
[23:22] <theczar> Flannel Mimi ActionParsnip, no, I was wondering where in the file exactly
[23:22] <Onidem> kitche: No go, "Saw signal 11. Server aborting"
[23:22] <gogereaver> mrinehart93 they always are
[23:22] <mrinehart93> ok
[23:22] <robert__> What a better web browser than firefox for the Gnome enviroment?
[23:22] <gogereaver> Onidem check your config
[23:22] <ActionParsnip> theczar: thats where the file goes, thefile itself is the config of the server
[23:22] <Flannel> theczar: Well, /sitess-enabled/default has a virtualhost, so you can edit that, or add to it, or copy it orwhatnot
[23:23] <ActionParsnip> theczar: man httpd.conf
[23:23] <kitche> robert__: the one that comes with gnome perhaps :)
[23:23] <mrinehart93> Well, how can I start gaming on Ubuntu? I was going to go on the forums to see how to do it
[23:23] <Onidem> gogereaver: How do i do that? Im very new to Ubuntu
[23:23] <nathan__> sorry if i'm inturupting, but i've had some problems with my router recently, i've fixed them, but ubuntu 8.10 doesn't detect my network card properly anymore, i can run dhclient and get an ip to connect to my local network, is there a way to either have the dhclient (and system) recognize dns or is there a way to reactivate the old network card (it's onboard)
[23:23] <Ansrana> are there any torrent apps in ubunut that have the same functionality and speed as utorrent for windows ?
[23:23] <Viper-Mode> robert__: Opera is pretty good, might try that if you havent already.
[23:23] <wolter> Ansrana, transmission.
[23:23] <ActionParsnip> theczar: http://www.faqs.org/docs/securing/chap29sec245.html
[23:23] <robert__> kitche, int that firefox....
[23:24] <Gnea> mrinehart93: http://ubuntuforums.org  they're working just fine
[23:24] <ActionParsnip> !torrent | Ansrana
[23:24] <unused_bagels> hi folks
[23:24] <wolter> Ansrana, in general, all the torrent programs work the same, the speed only depends on whether the port your application is using is open or not
[23:24] <Gnea> !games
[23:24] <Viper-Mode> Deluge-Torrent is nice
[23:24] <ActionParsnip> Ansrana: all are native apps so will run fast
[23:24] <robert__> Viper-Mode, I would prefer to stay open source and i did not care for it too much on windows :(
[23:24] <Ansrana> wolter ok
[23:24] <ActionParsnip> Ansrana: and who is uploading to you
[23:24] <rinja-sheep> Hello.  I'm trying to create a encrypted partition -- However -- the command "sudo dd if=/dev/urandom of=/dev/sda3" is CPU intensive and taking too long -- days, even.  What's the fast way?  I'm going to fill up the partition fast so I don't think I should be randomly concerned.
[23:24] <Ansrana> ok
[23:25] <Viper-Mode> robert__: ah you didnt specify that you had to have a Open Source web browser :)
[23:25] <gogereaver> robert__ you said a bad word
[23:25] <wolter> Ansrana, well yes, ActionParsnip is right: it depends on the torrent seeds (those who have the file complete and upload it to you) and the peers (people like you who just want to download the file)
[23:26] <kitche> robert__: no it's called ephiany or something like that
[23:26] <Ansrana> ok
[23:26] <ratpoison> hello! 8.10 amd64 user here. I have ati x1950 (r500). Is there any way (either radeonhd or ati catalyst) that I can have compositing enabled AND hardware accelerated video?
[23:26] <ge0rge007> I want to ask something about my sound card...can i talk with someone private?
[23:26] <ge0rge007> I prefer to talk private because i don't know English very good and it will be difficult to read with so fast posts coming on.
[23:26] <ge0rge007> If someone could help me it will be great otherwise i will ask public
[23:26] <geonikus2534> ..
[23:26] <ActionParsnip> !ati | ratpoison
[23:26] <unused_bagels> I'm having trouble adding the WineHQ server
[23:26] <robert__> Viper-Mode, hehe yea sorry :P
[23:26] <unused_bagels> I'm new to IRC...
[23:26] <Viper-Mode> :P
[23:27] <robert__> gogereaver, what word was that
[23:27] <Khyota> hey guys i have a friend that has a '0c45:624f Microdia PC Camera (SN9C201)' how can i find out waht driver he needs for this?
[23:27] <gogereaver> ge0rge007 thers ubuntu rooms for all languages
[23:27] <Onidem> Anyone help me get back into the GUI? Every time i reboot im stuck in console.  - Startx results in "Saw signal 11. Server aborting"
[23:27] <gogereaver> robert__ windows
[23:27] <ge0rge007> yes i know that
[23:27] <mezquitale> anyone here has experience using a password manager to manage all your passwords?? can you recommend me one?
[23:27] <ActionParsnip> unused_bagels: do you mean adding the repository?
[23:27] <robert__> kitche, oh I see I must have uninstalled that, is it any good?
[23:27] <kitche> Onidem: that's not really an error the real error is above that
[23:27] <ge0rge007> but that time at my ubuntu irc (Greek) there are not many users
[23:27] <ratpoison> ActionParsnip: I'm asking how to install the drivers. I'm asking if I can have hardware accelarated video over opengl
[23:27] <ge0rge007> and are all innactive...
[23:27] <Ansrana> which type of video cards have best support in ubunut ati or nvidia ?
[23:28] <kitche> robert__: kind of I think Ubuntu doesn't install it by default hence why you never seen it in the menu
[23:28] <SmokeyD> how does gnome terminal determine the default shell for a user?
[23:28] <unused_bagels> ActionParsnip: no, adding the IRC server...
[23:28] <ActionParsnip> mezquitale: apt-cache search password | grep manager | less
[23:28] <SmokeyD> I had it at sh, and changed it to bash
[23:28] <robert__> gogereaver, ahh comon they are not that bad it is no my OS of choice but they are not as bad as apple
[23:28] <SmokeyD> but gnome shell still gives me sh
[23:28] <ActionParsnip> unused_bagels: what client?
[23:28] <gogereaver> ge0rge007 well tell us the issue and i gues if someone has a answer they might pm
[23:28] <SmokeyD> although through ssh I get bash
[23:28] <ge0rge007> ok
[23:28] <robert__> kitche, well that would make sense
[23:28] <ratpoison> ActionParsnip: correction: NOT asking about how to install the drivers
[23:28] <ActionParsnip> ratpoison: id imagine that link would help, otherwise maybe someone else can help. i always avoid ati
[23:29] <public> while I have a connection - am very dissapointed at non-LTS versions being unstable and no reference to such on the download pages. If it's not stable then say so. Not saying so has got to be the fastest way to alienate poeple. Am massively dissapointed that I have to re-install just to get an internet connection working properly.
[23:29] <mezquitale> ActionParsnip,  i sort of wanted some feed back from user's personal experience
[23:29] <Gorthax> Ansrana: for ease of use, i would have to say nvidia
[23:29] <chris_cf> how to I list the running services in ubuntu ? (somthing like: rc-status from gentoo, or service --list-all from fedora)
[23:29] <unused_bagels> ActionParsnip: it's ok, I already added it.  I'm just having problems with Wine, and thought it might be easier to chat in there.
[23:29] <ActionParsnip> useruseruseruser: try in #wine
[23:29] <gogereaver> public they did say so not calling it lts
[23:30] <ActionParsnip> mezquitale: id just try some
[23:30] <DIFH-iceroot> ActionParsnip: sorry for asking again a gcc-question but it seems you have some skill with it, how to use gcc (optimation) so that gcc is telling me, that there is no "i"? http://rafb.net/p/vzeAVf61.html
[23:30] <Onidem> Error = "Backtrace:0:  [several lines]"   , then "Saw signal 11. Server aborting. Giving up.
[23:30] <ActionParsnip> mezquitale: or read  guides on each to see which appeals
[23:30] <Flannel> public: 8.10 isn't an unstable version at all.
[23:30] <Flannel> gogereaver: That's not true.
[23:31] <gogereaver> lts and bledding edge
[23:31] <Flannel> No, that's not how it works.
[23:31] <public> gogereaver, no, they did not - if you look at the download page it says no such thing. And it is promoted to the general public as if it's the bsest one to download
[23:31] <robert__> ok so how do I partition a mounted usb drive? i did gksudo gparted and it will not let me delete this crappy fat32 partition
[23:31] <ActionParsnip> DIFH-iceroot: you are using goto before the int is created, move the int i=9 to above the goto line
[23:31] <ge0rge007> i have a usb headset  connected to my computer and i have changed the settings so this will be used for communication.After i have done it i realized that with opera  export the sound to my sound card (so i can hear from my speakers) but firefox export the sound at my headset.Can anyone help me?
[23:32] <DIFH-iceroot> ActionParsnip: the code is working, i am making a presentation about goto and want to show that with compiler can optimze the code or detect that int i=9; can never reached with an error, but the program is working without an error :(
[23:33] <public> Flannel - by googling it would appear that a number of people are suffering with Ibex not providing network connections. that's not stable. It's really frustrating, and it's not going to gert punters to stick with it.
[23:33] <bobo1> cool site to share -- http://www.futuregame.com/index.php?r=vaderdarth21
[23:33] <ActionParsnip> DIFH-iceroot: weird i dunno why. i dont use goto commands as it is hideously unstructured coding
[23:33] <DIFH-iceroot> ActionParsnip: i know goto is very bad i want to show why
[23:33] <draginxx> Anyone know why a script is doing this? automake: cherokee/Makefile.am: not supported: source file `getopt/gettext.h' is in subdirectory
[23:34] <bobo1> cool site to share -- http://www.futuregame.com/index.php?r=vaderdarth21
[23:34] <robert__> ok i deleted the partiton table but now I just want to format this external drive with NTFS but that option is not avalible (gparted)
[23:34] <bobo1> install package ntfs-tools
[23:34] <bobo1> cool site to share -- http://www.futuregame.com/index.php?r=vaderdarth21
[23:34] <ActionParsnip> DIFH-iceroot: i'd use a diferent example like printf("This will not be output");
[23:34] <Flannel> public: I'm unfortunately not familiar with the specifics of network connectivity in Intrepid, but have you checked launchpad for bugs on the issue?  There may be a workaround there.
[23:34] <Onidem> Anyone help me get back into the GUI? Every time i reboot im stuck in console.  - Startx results in "Saw signal 11. Server aborting
[23:35] <Flannel> bobo1: Please don't advertise.
[23:35] <bobo1> sorry
[23:35] <bobo1>  wrong irc channel
[23:35] <DIFH-iceroot> ActionParsnip: this example i have, i want to show that there are runtime-problems
[23:35] <public> thanks Flannel
[23:36] <DIFH-iceroot> ActionParsnip: and want to show compiler-optimation like const bool a=false; if(a){compiler should delete everything here}
[23:37] <ActionParsnip> DIFH-iceroot: so the i variable gets defined despite the goto command jumping it?
[23:37] <mrinehart93> Hey guys how do I run a file ending with ".run"
[23:37] <ge0rge007> Have a goodnight ! :)
[23:37] <redvamp128> sh
[23:37] <mrinehart93> thanks
[23:37] <DIFH-iceroot> ActionParsnip: i have found it, if i use gcc with cpp the compiler is telling me because of goto the int i=9; will never reached, but if i am using gcc with c its not telling this
[23:37] <DIFH-iceroot> ActionParsnip: correct
[23:38] <DIFH-iceroot> ActionParsnip: i want to show how bad goto is
[23:38] <hvgotcodes> what is a PPA?
[23:38] <redvamp128> though may need sudo
[23:38] <bobo1> personal package archive
[23:38] <rdw200169> hvgotcodes: PPA is a Personal Package Archive, hosted on launchpad.net
[23:38] <hvgotcodes> rdw200169: what is the point?
[23:38] <rdw200169> hvgotcodes: it's where anyone can have their own debian repository
[23:38] <redvamp128> mrinehart93:  what are you trying to install ?
[23:39] <rdw200169> hvgotcodes: and reap the benefits of a remote build system and a version control system (bzr)
[23:39] <hvgotcodes> rdw200169: can other people install those
[23:39] <Nikty> ??.??.???
[23:39] <Milk_Rulz> what's the easiest way for me to isntall java?
[23:39] <rdw200169> hvgotcodes: yes, that's the major major benefit
[23:39] <Milk_Rulz> install*
[23:39] <redvamp128> mrinehart93:  sudo sh filename.run
[23:39] <kaptengu> how can I manually force established connections to specific host to be closed?
[23:39] <hvgotcodes> rdw200169: thanx -- i think there is one for awesome window manager
[23:40] <rdw200169> hvgotcodes: it has really exploded the package availability for ubuntu and debina
[23:40] <kitche> Milk_Rulz: by using synaptic or even aptitude
[23:40] <redvamp128> mrinehart93:  you may have to cd into that folder --
[23:40] <hvgotcodes> rdw200169: i can imagine -- makes things so much easier
[23:40] <Onidem> Anyone help me get back into the GUI? Every time i reboot im stuck in console.  - Startx results in "Saw signal 11. Server aborting"
[23:40] <Milk_Rulz> I tried using synaptic but it still says I don't have it.
[23:40] <rdw200169> hvgotcodes: now you can get *bleeding edge* of just about anything... from a repository, no compiling, no fuss, no muss!
[23:40] <bazhang> !ru | Nikty
[23:40] <hvgotcodes> rdw200169: BRILLIANT!
[23:41] <ActionParsnip> DIFH-iceroot: hmm, thats hugely weird. maybe its a compile thing kinda helping you out. i'd ask in #c++
[23:41] <freeflowcauvery> Hello everyone. What's the command to reveal what version of ubuntu I'm using e.g: fiesty fawn, etc.
[23:41] <kitche> !version | freeflowcauvery
[23:41] <ActionParsnip> freeflowcauvery: lsb_release -a | grep -i code
[23:41] <unused_bagels> hi all
[23:42] <freeflowcauvery> thanks kitche , ActionParsnip
[23:42] <unused_bagels> I has a little question:
[23:42] <unused_bagels> how do I turn off compiz?
[23:42] <Milk_Rulz> kitche: what one is it in synaptic?
[23:42] <Anonymous>  I sudo apt-get removed xubuntu-desktop after installing xubuntu-desktop, but when I check sessions, xfce is still an option. I went into synaptic and removed anything xubuntu related. Should I remove xfce4 entries as well?
[23:42] <nbeebo> why isnt there a gui for xorg.conf?
[23:42] <kitche> Milk_Rulz: well there is sun-java but you do know you have java installed already correct?
[23:42] <hvgotcodes> rdw200169: is it as simple as adding the repos to sources.list and then updating?
[23:42] <wfiuewfew> Hi! I have downgraded my kernel to 2.6.24. But the source code in /usr/src remains the 2.6.26 version. Can I downgrade this source as well? There is no synaptic library.
[23:43] <Milk_Rulz> from what I've read yes
[23:43] <redvamp128> unused_bagels:  system- preferences- then appearance then visual settings-- then turn off all effects
[23:43] <unused_bagels> oh, is that  it? thanks redvamp 128 . There used to be a compiz configuration thingy, but now that I've upgraded, I see it's integrated now.
[23:43] <unused_bagels> night all.
[23:44] <redvamp128> unused_bagels:  I can link you the compiz switch if you want
[23:44] <samuel> how do you paste multiple lines into a terminal without breaking things?
[23:44] <Milk_Rulz> kitche: but the java site is even saying that I don't have it installed.
[23:44] <samuel> i.e., I want to copy the contents of a file and paste it into a command line
[23:44] <kitche> Milk_Rulz: that's because openjdk is not Sun Java really
[23:44] <kitche> Milk_Rulz: you want to install a sun-java package which is in the repos
[23:44] <redvamp128> unused_bagels:  http://forlong.blogage.de/en/entries/2008/5/1/Compiz-Switch-04-released
[23:45] <unused_bagels> redvamp128: sure, what'sthat? I'm still a bit green
[23:45] <unused_bagels> ok ty
[23:45] <sheikpunk> hello guys
[23:45] <sheikpunk> somebody can help me?!
[23:45] <Milk_Rulz> kitche: would that be "sun-java6-javadb?
[23:45] <redvamp128> sheikpunk:  ask your question
[23:45] <kitche> Milk_Rulz: nope
[23:46] <kitche> Milk_Rulz: either jdk or jre
[23:46] <U-b-u-n-t-u> anyone know of a good port scanner other than the one in network tools
[23:46] <kitche> Milk_Rulz: also the -plugin
[23:46] <sheikpunk> my x dont start and display message DRIScreenInit failed
[23:46] <draginxx> Anyone know why a script is doing this? automake: cherokee/Makefile.am: not supported: source file `getopt/gettext.h' is in subdirectory
[23:46] <sheikpunk> i use openchorme driver on ubuntu 8.10
[23:46] <Milk_Rulz> kitche: I installed sun-java6-bin and jre last night, that hasn't seemed to do anything.
[23:46] <sheikpunk> my display card is via chrome9
[23:47] <kitche> Milk_Rulz: you installed sun-java6-bin? not plugin?
[23:47] <Milk_Rulz> I'm not sure,
[23:47] <redvamp128> sheikpunk:  I can get you back to where you can at least do something-- like reinstall or problemsolve (I don't have that video card)
[23:47] <ActionParsnip> sheikpunk: boot up and drop to console and run dmesg | less
[23:48] <redvamp128> ActionParsnip:  couldn't he also use Sudo reconfigure Xorg ? to at least get him back to the desktop to do something?
[23:48] <sheikpunk> ActionParsnip: and now?
[23:49] <ActionParsnip> sheikpunk: read down and see if you can see any issues in there
[23:49] <ActionParsnip> redvamp128: oh definately but if the system trys to run the chrome driver and it fails it will say why in dmesg
[23:49] <kixx> I just installed a Brother Printer driver with dpkg that turned into a mess because of a failed dependency from lpr.
[23:50] <redvamp128> ahh ActionParsnip
[23:50] <kixx> Since the package is a mess, I cant remove it with dpkg -P
[23:50] <ActionParsnip> redvamp128: there is method in my madness
[23:50] <sheikpunk> ActionParsnip: im running in rescue mode and not have issues in there
[23:50] <Fred1447> I've just installed 8.10 while carrying over the /home folder from a previous Ubuntu-mint installation. The install went fine, and the first boot was great, but after updating all packages, it asked me to restart, and then the monitor goes into powersave mode after the ubuntu loading screen. (can still hear the startup sound though). I also installed ubuntu-restricted-extras if that makes a difference...
[23:51] <fdjkkkmwre> could anyone tell me how to "render" a video file?
[23:51] <sheikpunk> but i run startx command it show and break
[23:51] <gogereaver> Fred1447 nivida card??
[23:51] <sheikpunk> so fast.
[23:51] <Milk_Rulz> kitche: Thank you, I got it now.
[23:51] <sheikpunk> and show message
[23:51] <sheikpunk> DRIScreenInit Failed
[23:51] <shinygerbil> which type of ubuntu should one use for an intel quad core? the 64-bit distro is named "amd64"..so not that one? :p
[23:51] <ActionParsnip> sheikpunk: thats cool, make it do that then run: dmesg | tail
[23:52] <gogereaver> Fred1447 if so try running the nivida config
[23:52] <Flannel> shinygerbil: You want 64 bit or 32bit?
[23:52] <treats> I need help installing XFree86 for my VIA gfx drivers.  Can anyone help?
[23:52] <kitche> shinygerbil: the amd64 if you want 64-bit
[23:52] <ActionParsnip> Fred1447: sudo nvidia-xconfig
[23:52] <shinygerbil> preferably 64bit, but it doesn't matter too much
[23:52] <gogereaver> treats i free wtf
[23:52] <gogereaver> treats xfree
[23:52] <treats> gogereaver: ?
[23:52] <shinygerbil> thanks :D
[23:52] <sheikpunk> ActionParsnip: rescue mode run some a only one session
[23:52] <gogereaver> treats do you mean xorg
[23:53] <treats> um..
[23:53] <ldskf> could anyone tell me how to "render" a video file?
[23:53] <treats> "Couldn't find package XFree86-libs"
[23:53] <regex> ho be cish boni
[23:53] <regex> mejr ini
[23:53] <gogereaver> treats xfree was dumped a long time ago due to liancing issues
[23:53] <ActionParsnip> regex: english only here dude
[23:54] <MrPeepers310> hey does anyone know if there is a repository of backtrack 3 applications for ubuntu?
[23:54] <ldskf> guess ubuntu is the wrong place to ask about video editing.
[23:54] <draginxx> Anyone know why a script is doing this? automake: cherokee/Makefile.am: not supported: source file `getopt/gettext.h' is in subdirectory
[23:54] <sheikpunk> ActionParsnip: nothing...
[23:54] <treats> Alright, a new question for the group then:  How can I get my S3 UniChrome Pro gfx for VIA C700 drivers on my box?
[23:55] <treats> MrPeepers310: why not just run a backtrack vm?
[23:55] <sheikpunk> via display cards so bad
[23:55] <sheikpunk> thank you friends
[23:55] <gogereaver> via driivers should work fine under oss rivers
[23:55] <MrPeepers310> treats: sucks when you have to update stuff and doesn't work directly with the hardware on your computer
[23:56] <gogereaver> drivers
[23:56] <koto> is there a way to extract the model name from a queryset? I'm passing the queryset to object_list which I read out in a template.
[23:56] <treats> gogereaver: your last comment went right through my head
[23:56] <ldskf> man i wish ubuntu worked with video editing...
[23:56] <digitalj> What's faster, a Pentium 4 3.0GHz or a Pentium D 2.8GHz ?
[23:56] <zero__> Hello, someone here that can help me with my audio card problem?
[23:56]  * ldskf fishes for help 
[23:57] <zero__> can someone, its really pissing me off
[23:57] <Fred1447> excuse me, can I be heard? I'm a bit green to irc...
[23:57] <_Vi_> !patience
[23:57] <treats> Fred1447: hi, we hear you.
[23:57] <|unjustice|> haha
[23:57] <|unjustice|> problem?
[23:57] <|unjustice|> you might want to explain that before people can help you...
[23:58] <levis-x> hahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahaha
[23:58] <levis-x> hahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahaha
[23:58] <levis-x> hahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahaha
[23:58] <levis-x> hahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahaha
[23:58] <gogereaver> treats looks like thers a driver for it
[23:58] <gogereaver> xserver-xorg-video-savage
[23:59] <zero__> Ok, so i installed ubuntu once, like few h ago, but while updating the whole ubuntu crashed cuz of gnome updating was broken, and i installed again and now i got bug with audiocard, i hear sound in Speakers AND my headphones.... how to make it only working on headphones?
[23:59] <Flannel> Fred1447: The best way to get help/answers on IRC is to just ask the question, and whoever knows the answer will answer.
[23:59] <gogereaver> treats thats sudo apt-get xserver-xorg-video-savage
[23:59] <|unjustice|> zero__: so your speakers play when headphones are in and playing?
[23:59] <treats> gogereaver: haha, thanks that was my next question
[23:59] <zero__> ye