[00:00] <jrib> ximo: huh?  I asked you several questions, so your single response is confusing
[00:00] <savvas> lard|arse: the diff :)
[00:00] <jrib> calwig: I mean your shell expands foo{1,3} to foo1 foo2 foo3
[00:00] <Aberration> If I switch off pulse. DMIX will start instead, won't it?
[00:00] <ximo> jrib: sorry, i  checked the cap locks, this happens every time....I can log corrctly in tty
[00:01] <calwig> jrib: oh, well the files will be there although some files will not all be sequential 1,2,3,5,7,8,9,10   could this create that expansion?
[00:01] <fow> jrib, it expands to foo1 foo3
[00:01] <lard|arse> savvas: http://paste.ubuntu.com/117888/
[00:01] <sensae> I'm having an odd problem where flash objects load on web pages, and then randomly within 30 seconds to 3 minutes, all instances of flash die and turn into gray boxes.
[00:01] <fow> jrib, foo[1-3] would expand to foo1 foo2 foo3
[00:01] <fow> damnit I'm supposed to be sleeping
[00:01] <ximo> jrub: is very strange, could this have something to do with my fingerprint reader soft?
[00:02] <jrib> fow: ha, sorry.  I meant {1..3}
[00:02] <ximo> jrib: i configured my laptop so as to log with my finger, and this cworks just fine
[00:02] <jrib> calwig:  ha, sorry.  I meant {1..3}
[00:03] <ximo> jrib: so i don`t think that `s it
[00:03] <calwig> jrib: ok perhaps i need to have it explained a bit more detailed
[00:03] <pepperjack> ximo: it just seems really odd sorry not sure
[00:03] <jrib> calwig: foo{1..3} epands to foo1 foo2 foo3
[00:03] <int256> i increased download speed in ubuntu.
[00:03] <ximo> pepperjack: ok, thank`s anyway
[00:04] <calwig> jrib: so that doesnt move the files?
[00:04] <jrib> calwig: right.  You use mv to move files
[00:04] <calwig> jrib: correct, thats what i want to use
[00:05] <jrib> calwig: so use mv foo{1..3} TARGET    right?
[00:05] <calwig> jrib: is there a simple shell to move files, like file commander or something
[00:05] <calwig> right
[00:05] <jrib> calwig: mc
[00:05] <dee25> how u remote to somebody computer
[00:05] <jrib> !ssh | dee25
[00:06] <ximo> jrib: Any ideas? I read googling around that someone had the same problem but he didn`t get an aswer
[00:06] <Delvien> and the beauty of putty is you can run it off a USB !
[00:06] <calwig> jrib: can i move files with mc?
[00:06] <jrib> ximo: don't know.  finger print reader is a good guess.  Have you checked bugs.ubuntu.com
[00:06] <savvas> lard|arse: I'm searching for something, hold a sec
[00:07] <dee25> can i use anything besides my freind has a virus in his pc
[00:07] <ximo> not yet, I`ll check it rigth the way..tks!
[00:07] <dee25> tryin to remote to her computer so i could remove for her
[00:07] <ximo> jrib: not yet, I`ll check it rigth the way..tks!
[00:08] <constantine> what settings should I use in openvpn config for unencrypted wifi?
[00:08] <jrib> calwig: I assume so, I don't use it.  For what you are doing I imagine using mv would be easier
[00:09] <xTheGoat121x> Hi all... I've managed to bork my Hardy install... I've booted CrunchBang's Live CD but I cannot get my home folder to back up.
[00:09] <gizmo_the_great> Having installed the linux-server kernel, how do I revert back to the generic one?
[00:10] <Delvien> gizmo_the_great: boot into it from GRUB
[00:10] <Huufarted> pepperjack, I looked through the guide posted and I looked (and installed) firestarter.  That's a NICE setup
[00:10] <Flannel> gizmo_the_great: install -generic (or don't, if its still installed), choose generic at GRUB, and then once you've booted to it, you can remove -server through package management
[00:10] <Huufarted> a LOT easier than on FreeBSD fore sure.
[00:10] <gizmo_the_great> Flannel: cheers :-)
[00:10] <^hashbang^> firestarter?
[00:11] <Glassworks> where can i ask a question about screenlets
[00:11] <Huufarted> !firestarter | ^hashbang^
[00:11] <int256> which is the fastest downloader for ubuntu
[00:11] <Huufarted> HA!  I got to do it to you, hashbang.  :)
[00:11] <^hashbang^> nice!
[00:11] <^hashbang^> =)
[00:12] <Huufarted> and now, I just discovered that I have one of the best wifi chipsets on the market for packet injection...  time for aircrack.ng
[00:12] <pepperjack> Huufarted: i would definately agree. :)
[00:12] <Rhaegar> hello
[00:12] <Huufarted> Damn, Linux makes me act like a little kid at Christmas
[00:12] <calwig> jrib: ok thanks for the help :)
[00:12] <^hashbang^> !welcome Rhaegar
[00:13] <Huufarted> *pssst!* !welcome ! Rhaegar
[00:13] <Glassworks> any of you guys using screenlets - watermark
[00:13] <Huufarted> oops | not !
[00:13] <Okashi> Is there someone who is good with sound, because now I have two problems, one with a mic and one with my speakers buzzing...
[00:13] <lard|arse> Okashi: it could be that your computer is sending mic input to the speakers, causing feedback
[00:13] <lard|arse> and i'm not sure how to fix that
[00:14] <Okashi> darn...
[00:14] <Huufarted> Okashi, could also be the speakers (if they're external) are not plugged in all the way.
[00:14] <savvas> lard|arse: did you file a bug about it?
[00:14] <lard|arse> how to know if this is the case is that turning off or unplugging the mic stops the buzzing
[00:14] <Huufarted> Some of the contacts might be shorted on the speaker connection
[00:14] <linkinx64_> Okashi, is it coming from the speakers . or headphones?
[00:14] <Okashi> (Huufarted): I checked that first
[00:14] <lard|arse> savvas: not yet... should it?
[00:14] <Okashi> (linkinx64_): the speakers
[00:14] <GeffIsLegend> hey everyone , i need to know what program to use on ubuntu 8.10 to burn audio cds for my car, i dont know which one to use because when i try to burn them they show up error when i try to play them
[00:14] <linkinx64_> Okashi, i had a problem like that... but it was my headphones
[00:15] <fxhp> happy epoch?
[00:15] <Okashi> (linkinx64_): ah...how did you fix it?
[00:15] <linkinx64_> Okashi, lol i replacethe headphones
[00:15] <savvas> lard|arse: yes, please do :) http://bugs.launchpad.net/ubuntu/+filebug and file it against the package linux
[00:16] <Glassworks> oh hey about sound. my brother has 8.10 installed and his sound is really low, i'm not asking for a troubleshoot just if there is something that is known about 8.10 and realtecl audio cards
[00:16] <Okashi> (linkinx64_): >_< these are new speakers...
[00:16] <pepperjack> GeffIsLegend: get k3b and then search for the mp3 plugin for it. it uses qt but its still the best gui burning app
[00:16] <linkinx64_> Glassworks, check the volume in alsamixer
[00:16] <Glassworks> no he has
[00:16] <Rhaegar> errr, ive never used anything but xp/vista before.
[00:16] <linkinx64_> Okashi, :( sorry i dont know
[00:16] <Okashi> darn...
[00:16] <GuruDrew> Are there any Open Source games with GOOD graphics and gameplay?
[00:16] <Rhaegar> is ubuntu a good choice .V
[00:16] <savvas> lard|arse: attach both files and mention when they were taken: http://paste.ubuntu.com/117874/ http://paste.ubuntu.com/117888/
[00:16] <linkinx64_> Rhaegar,  yes :)
[00:16] <ddoom> wondering how I can mount a mac os x formatted external drive, fdisk -l says id=ee  system=EFI GPT
[00:17] <Okashi> Anyone else know about sound?
[00:17] <pepperjack> Rhaegar: i use several distros and bsds so im not biased.  ubuntu is the best choice imo
[00:17] <linkinx64_> Okashi, try to do a serach on google
[00:17] <linkinx64_> pepperjack, agree.....wanna a beer?
[00:17] <pepperjack> ddoom: i think you need to install the hfs tools
[00:17] <Okashi> (linkinx64_): did that before I came here, came up with nothing that really helped, that's how I ended up with two problems instead of one.
[00:18] <linkinx64_> o wow sorry to read that
[00:18] <linkinx64_> Okashi, 8.10?
[00:18] <Okashi> (linkinx64_): yeah
[00:18] <ozzloy> i have a program that expects keycode 0x1B but my keyboard is actually producing 0x10001B.  is there somewhere i can go to verify that chopping off the top bits is a legit workaround?
[00:18] <linkinx64_> Okashi, never happened with 8.04?
[00:18] <Okashi> (linkinx64_): I have never used 8.04
[00:18] <erichammond> If a DNS name in sources.list resolves to a round robin IP list, and one of those IP addresses does not respond, would apt-get try a different IP address?
[00:19] <ozzloy> any resource on understanding keyboard input is greatly appreciated.
[00:19] <GeffIsLegend> pepperjack: oh okay so where would i find the mp3 plugin for it though?
[00:19] <linkinx64_> Okashi, not sure.....i am running 9.04 and it's perfect
[00:19] <linkinx64_> but it's alpha
[00:19] <Okashi> (linkinx64_): *sigh* it was working fine till I tried to get the headset to work....
[00:20] <pepperjack> GeffIsLegend: sudo apt-get install libk3b2-extracodecs    or just install that package in the package manager
[00:23] <dee25> can somebody help me with this resolution issue
[00:23] <samperet> register abcd sdperet@gmail.com
[00:24] <lard|arse> savvas: seems to be related to https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/320268 (scroll down to the posts by MattParkins), although that appears to be filed against a different package
[00:26] <Rhaegar> hmmmm. burning the ISO now. anything i should know/do before i install?
[00:26] <savvas> lard|arse: file a new bug, but mention it might be related to that one (with a link) :)
[00:27] <bernhard> hi, ive just upgraded to kde 4.2 packages from the official repos
[00:27] <bernhard> it says libplasma3 cant be installed
[00:27] <Guest34270> hi
[00:27] <tananda> quit
[00:27] <francho> hi
[00:27] <Guest34270> hi
[00:27] <francho> i am using irssi right now
[00:27] <FAJALOU> hi right now I have two cd players in my computer.  I am trying to import a cd but rythmbox tells me that i cannot import them; "permission denied"  other cd players are acting the same way.  help please (ubuntu 8.04)
[00:27] <francho> anybody knows how can i quit from this program?
[00:28] <FAJALOU>  /exit
[00:28] <snegtul> alt-f4?
[00:30] <lard|arse> savvas: ok...
[00:30] <FAJALOU> hi right now I have two cd players in my computer.  I am trying to import a cd but rythmbox tells me that i cannot import them; "permission denied"  other cd players are acting the same way.  help please (ubuntu 8.04)
[00:32] <pepperjack> FAJALOU: run the groups command and make sure you have access to cdrom audio and all that stuff
[00:33] <zcat[1]> http://pastebin.com/m5f9892ab (weird thing is, I had this working before.... now if gets through the start animation stuff, asks for a name and promptly crashes. And ideas? I suspect it's trying to write user data somewhere and failing but I can't understand the crash log)
[00:33] <VolVE> maybe this is an easy question, but how can I tell what type of cpu a system has from the command-line? Is there a way to tell from /proc/cpuinfo if I'm running a Xeon E5310 for example?
[00:33] <pepperjack> VolVE: cat /proc/cpuinfo
[00:33] <pepperjack> VolVE: lol sorry
[00:33] <VolVE> pepperjack: ha, thanks :)
[00:33] <FAJALOU> pepperjack:  what is the groups command?  and where is the cd stored?? lol
[00:34] <pepperjack> VolVE: im on a xeon atm it shows the model name as intel(R) xeon(TM) cpu 1.80GHz in cpuinfo
[00:34] <redvamp128> zcat[1]:  try #winehq
[00:34] <VolVE> pepperjack: ah, thanks. This server most have just a desktop dual-core P4 then as it doesn't mention Xeon at all
[00:34] <zcat[1]> redvamp128, already did. nobody saysing a word in there for about the last 15 minutes
[00:34] <redvamp128> zcat[1]:  also there is a wine development release released today-
[00:35] <zcat[1]> redvamp128, which is the one I've just upgraded to after it didn't work on wine1.0 either. still exactly the same error
[00:35] <redvamp128> zcat[1]:  1.1.15 (which should be in budgeted sometime this weekend)
[00:35] <FAJALOU> how can i restore original permissions to a directory???
[00:36] <zcat[1]> Oh.. one-up.
[00:36] <redvamp128> zcat[1]:  also have you disabled compiz? sometimes that causes random crashes of wine programs
[00:36] <zcat[1]> I don't even have 3d drivers
[00:36] <redvamp128> zcat[1]:  (that also means desktop effects set to none)
[00:37] <redvamp128> zcat[1]:  also do you have a link to what daywatch.exe is
[00:37] <redvamp128> zcat[1]:  correction daybeach
[00:37] <zcat[1]> had this working on my laptop before, sis chipset, no 3d support at all. No 3d support here or any of the machines I'm trying to get this working on., can't set the desktop effects to anything but none..
[00:38] <ODDG> please, number of printed pages is always equal with 1 even the job has many pages. Can you give me a solution or an advice ?
[00:38] <redvamp128> zcat[1]:  do you have a link to the main site about that program
[00:38] <kriss3d> Hi.. how do you make the middle mousebutton to toggle a mousecontrolled scroll like in windows ?
[00:39] <redvamp128> zcat[1]:  because the only thing I can find about that one is first 5 searches say Spyware
[00:39] <FAJALOU> how to manually scan for metadata in banshee?
[00:39] <jrib> kriss3d: autoscroll in firefox you mean?
[00:39] <kriss3d> well in browsers and windows
[00:39] <kriss3d> like in windows.ll i can click the scroll wheel and then move the mouse up or down and it will scro
[00:39] <kriss3d> scroll
[00:40] <Glassworks> guh i can't get flash 10 plugin to work
[00:40] <zcat[1]> It's SuperSpell Day At the Beach. Not eve sure the company exists any more, all I can find is reviews on teaching sites. It's legit software which was bought on CD, not spyware ;)
[00:40] <FAJALOU> how to manually scan for metadata in banshee?
[00:41] <redvamp128> zcat[1]:  I am in wine hq
[00:41] <zcat[1]> http://hoopers.com.au/products.html
[00:41] <jrib> kriss3d: well in firefox, you can set it up in firefox's preferences.  I'm not aware of a way to do it in nautilus though
[00:42] <kriss3d> jrgp, ok thanks.. ill just look into that..
[00:42] <bitmonk> Howdy.  with two bridges br0 and br1 configured for eth0 and eth1 in my /etc/network/interfaces, my system goes through a nutty period at startup before launching any gettys or sshd, but after bringing up the interfaces, whereby it restarts ntpd a number of times.  any idea what's up?
[00:42] <Oli``> I accidentally xkill'd my panels... how can I reload them?
[00:43] <Glassworks> did you guys download that firefox update and not have flash work even after you reinstalled iy
[00:43] <Glassworks> it
[00:43] <Glassworks> too
[00:44] <tsrk> I'm running a shared server, what's the best way to disable shell access for someone (but still let them access their files via ftp)?
[00:45] <fallore> how do i mount a volume in the terminal?
[00:46] <guanhy> morning
[00:46] <guanhy> hi
[00:46] <pepperjack> Oli``: gnome-panel
[00:47] <Oli``> pepperjack: it's complaining that there's already a shell
[00:47] <Dr_Willis> fallore,  proper use of the 'mount' command is the normnal way
[00:47] <tsrk> fallore, # mount /dev/---- /mountpoint
[00:47] <fallore> where would one normally mount it?
[00:47] <Oli``> pepperjack: >_< killall gnome-panel killed off a stalled panel and reloaded =)
[00:47] <guanhy> what's up
[00:47] <pepperjack> Oli``: eh. it normally respawns i just xkilled mine and it came right back
[00:47] <guanhy> ?
[00:48] <Dr_Willis> fallore,  whever you want.. 'sudo mkdir /media/MyStuff'    'sudo mount /dev/whatever /media/MyStuff'
[00:48] <Oli``> pepperjack: yeah I think it crashed half-way through being killed... system is being kind of glitchy today
[00:48] <FAJALOU> hi how can i scan for metadata in banshee?
[00:49] <kriss3d> Dr_Willis,  wouldnt it make more sense to mount somthing at /mnt instead ?
[00:49] <kriss3d> since /media is a sorta like /dev
[00:50] <Dr_Willis> kriss3d,  NO..  youi dont understand what /media/ is . :)
[00:50] <jrib> kriss3d: erm, how so?
[00:50] <Dr_Willis> kriss3d,  things get mounted UNDER /media/ in their own dirs.. like i showed.
[00:50] <calwig> !mc
[00:50] <kriss3d> well yeah.. it might just be me but i always mount things in /mnt
[00:50] <jrib> !info mc | calwig
[00:50] <kriss3d> makes it easier to find
[00:51] <Dr_Willis> kriss3d,   thats easier? in what way?
[00:51] <Dr_Willis> kriss3d,  what if you mount 5 different things. :)
[00:51] <bastid_raZor> things mounted in /media will show up on the desktop. that would make it easier to find.
[00:52] <kriss3d> Dr_Willis,  i just like my things mounted in same folder /mnt.. i suppose its all a matter of habbit
[00:52] <nickrud> kriss3d, ubuntu is following the fhs, /mnt is intended for transient mounting; http://osdir.com/ml/linux.lsb.specification/2003-11/msg00032.html has a good exposition
[00:53] <Dr_Willis> kriss3d,  i got /mnt/ linked to /media/ :P
[00:53] <ardchoille> hehe
[00:53] <kriss3d> ah ok
[00:53] <nickrud> oh, that's evil. What I I walk you through a fix and want to use /mnt as intended Dr_Willis ? :)
[00:54] <tim> hi folks
[00:54] <fearful> hi
[00:55] <tsrk> Why is this so quiet?
[00:55] <bemuse> Everyone has mastered Ubuntu :P
[00:55] <fearful> tsrk: No real answer to that, no one is experiencing issues
[00:55] <tim> just startin
[00:55] <fearful> bemuse: I can assure you thats not the case :)
[00:55] <tsrk> ah ok
[00:55] <bemuse> haha, i know
[00:55] <tsrk> except me :P
[00:55] <tsrk> I'm running a shared server, what's the best way to disable shell access for someone (but still let them access their files via ftp)?
[00:55] <bemuse> I'm one of the big newbies
[00:55] <bitmonk> tsrk: assign a shell like /bin/false
[00:55] <fearful> bemuse: We all are, to a certain extent
[00:56] <tim> figured out the dual monitor thing.
[00:56] <tsrk> bitmonk, what's the best way to do that?
[00:56] <bitmonk> or, you can use something like ldap/krb or another auth db for ftp, many ftpd support non-system users..
[00:56] <tsrk> edit /etc/passwd?
[00:56] <bitmonk> tsrk: that's the most straightforward
[00:56] <tsrk> well I want them to have a user on the system
[00:56] <tim> where can i get alien
[00:56] <tsrk> for apache and stuff
[00:56] <jrib> tsrk: avoid alien
[00:56] <nickrud> !alien | tim
[00:56] <jrib> tim: avoid alien
[00:56] <Dr_Willis> tim,  and why do you need that?
[00:57] <nickrud> tim, think the movie, it's pretty close if you're not absolutely sure what scripts are in the rpm/tar
[00:57] <tsrk> will changing their shell in /etc/passwd change what's used for the php exec() function?
[00:57] <tim> want to install vmware and need to convert an rpm so ubunto will install it
[00:57] <nickrud> tim, get the tar.gz instead, it installs fine
[00:57] <bitmonk> tsrk: good question.
[00:57] <tim> ok
[00:57] <Dr_Willis> tim,  last i looked - there were deb packages of vmware. i have also used that tar.gz befor
[00:57] <Dr_Willis> but i use virtualbox now a days
[00:57] <bitmonk> if they can php exec(), who cares if they can just ssh?
[00:57] <nickrud> debs? I'd use debs too
[00:58] <Dr_Willis> !vmware
[00:58] <frank_b> can anyone tell what's the best program in ubuntu for video conference at this moment?
[00:58] <tsrk> bitmonk, i was hoping it would disable exec()
[00:58] <shaggy123> frank_b for one to one Skype most likely
[00:59] <bitmonk> tsrk: ah, it may, i'd suggest testing and reading docs for php exec()
[00:59] <tsrk> bitmonk, i'm reading the docs right now but it doesn't say anything about the shell it uses
[00:59] <bitmonk> you should be able to control that in php config, unless run as a cgi, i don't think php runs as the user who owns the file.
[00:59] <SrgSiler|sAFK> anyone know if i can do internet connection sharing in ubuntu?
[00:59] <frank_b> shaggy123, OK, that's what I suspected, thank you very much for your tip! :)
[00:59] <bitmonk> php exec() probably has the permissions of the apache user.
[01:00] <bitmonk> you should just be able to disable it with an apache config or php.ini paramater
[01:00] <shaggy123> frank_b welcome :)
[01:00] <lock> has anyone managed to get a ATI x850 working with 3d accel?
[01:01] <tsrk> bitfish, i use mpm-itk to change the user so it does run as the correct user
[01:01] <fearful> Anyone have an idea why my slabtop shows everything over 95% usage :\ kinda worrying
[01:02] <wahnfrieden> hi
[01:02] <ardchoille> fearful: anything useful in top?
[01:02] <wahnfrieden> i just read this article on reddit about someone replacing their car's ECU computers with Ubuntu UNIX???
[01:02] <ardchoille> wahnfrieden: wouldn't surprise me
[01:03] <wahnfrieden> can you tell me how to?
[01:03] <fearful> ardchoille: I have like 130+ process but only like 5 are running rest are sleeping, and my id% is over 80% always
[01:03] <bastid_raZor> fearful; id% would be idle%
[01:04] <fearful> bastid_razor: yea I don't understand why so many process are running, is it normal?
[01:04] <Raylz> could it be that somehow broken hardware is running smoothly in windows but causes weird errors in ubuntu?
[01:04] <Raylz> like crashing programs
[01:04] <fearful> total slabs = 100%
[01:04] <wahnfrieden> poo slabs??
[01:05] <fearful> I'm just wondering if this should be worrying or not
[01:05] <fearful> RAM usage is always below 30% so thats good
[01:06] <Dr_Willis> Raylz,  i have found bad memory can often cause that sort of issue.. windows crashes so much.. you dont notice the problem.. but under linux.. it sees the problem and gives an error befor it crashes. :) but ya never notice the error.
[01:06] <bastid_raZor> fearful; get htop. it has a slightly nicer UI
[01:06] <Raylz> Dr_Willis: i did a memtest for 4 hours
[01:06] <Raylz> no errors
[01:06] <fearful> bastid_razor ok, but that still doesn't answer my question, is it normal that the usage of slab should be that high?
[01:07] <Dr_Willis> Raylz,  Just 4? :)    On my system it showed the bad mem in 4 sec...
[01:07] <fearful> bastid_razor, not really cuasing problems just caught my attention
[01:07] <Raylz> Dr_Willis: dunno, i know that something is terrible broken in this pc, windows acts weird too, but a lot less
[01:07] <bastid_raZor> fearful; slabs?
[01:08] <fearful> bastid_razor, yup press slabtop on your system it shows the output of like the cache and stuff.. which i'm not really familiar with I found this command today
[01:08] <fearful> type*
[01:08] <Dr_Willis> Raylz,  that can be hard to track down.. I had a flakey pc.. eventually found a ide cable with one thin cut on the wire on one side...
[01:09] <kanuha> Installed nvidia driver 180 on jaunty, but after login the screen just goes blank. jaunty continues to load in the dark, because I hear the music.
[01:10] <bazhang> #ubuntu+1 for jaunty kanuha
[01:10] <Raylz> Dr_Willis: there must be some try { do_something();} catch ERORR { } stuff in windows :D
[01:10] <kanuha> bazhang, thx
[01:11] <bastid_raZor> fearful; do you know what slabtop is actually looking at?
[01:11] <Dr_Willis> Raylz,  i find that windows crashes so much normally.. you dont notice the extra crashes.
[01:11] <fearful> bastid_razor not really thats why I'm asking :p
[01:11] <Raylz> Dr_Willis: it doesnt crash for me, but it doesnt work well, maybe because of the broken hardware
[01:11] <bastid_raZor> fearful;  type man slabtop
[01:11] <Raylz> i just dont know what to replace
[01:12] <Raylz> would be better to buy a new one for 300 bucks
[01:12] <Raylz> any tools to trace down hardware errors?
[01:12] <Raylz> like some special knoppix version
[01:12] <fearful> bastid_razor, I did...
[01:12] <fearful> bastid_razor I even showed you the output...
[01:13] <fearful> bastid_razor I'm trying to get you to tell me what it is... if not I wouldn't be asking
[01:13] <steelcityjim> i have recently created a samba share drive and am having problems moving files from windows pc's to ubuntu
[01:14] <steelcityjim> getting copy protected or drive full?
[01:14] <steelcityjim> any suggestions
[01:14] <fearful> steelcityjim: what drive, try and change permissions?
[01:14] <Dr_Willis> steelcityjim,  check the permissions/ownership of the shared directory.
[01:15] <fearful> steelcityjim oh I didn't see the top message you can change the permissions
[01:15] <steelcityjim> what should the authentication mode be?
[01:15] <steelcityjim> user serer share domain or ads
[01:16] <n\median> hello! can anyone help me? i accidentally erased passwd file! how can i recover it?
[01:16] <mint> can someone tell me why we can't install on a usb stick like a regular drive?
[01:16] <steelcityjim> will share allow any user to have access?
[01:16] <bemuse> Hey, simple question, how do i hide icons in the taskbar thing.
[01:16] <Dr_Willis> mint,  it can be done.. but can cause problems. Ive seen guides on doing it, but never tried. I just use the live-cd type methods.
[01:17] <doubletoker> what's up
[01:17] <doubletoker> I just installed 8.10
[01:18] <doubletoker> and now, everything is messed up
[01:18] <kanuha> are resolutions still identified and used in the xorg.conf
[01:18] <jrib> !x |
[01:18] <mint> Dr_Willis: what kind of problems?
[01:18] <jrib> kanuha: see what ubottu said
[01:18] <kanuha> jrib, yes thx
[01:18] <doubletoker> Synaptic Package Manager wont let me install apache, no where in the list
[01:19] <mhall119> kanuha: newer Xorg doesn't use the xorg.conf file for determining available resolutions, it auto-detects them
[01:19] <jawnas> doubletoker: Did you enable the multiverse repos?
[01:19] <Flare183> !universe | doubletoker
[01:19] <mint> Dr_Willis: my bios is fully capable of usb boot and has an option to use usb as a hard drive
[01:19] <Dr_Willis> mint,  grub,  and devices getting reordered (not that big an issue now a days wiuth UUID= in grub and the fstab) and some  issues with the initrd (initramfs?) not having the proper usb drivers built in - i recall..   last i tried was 2+ releases ago. It may not be much of an issue any more
[01:20] <Dr_Willis> mint,  good for it.. thats no guarentee of success. since theres a lot of other little issues that can bite you.  I would research it/google it - in depth to know what to watch out for.
[01:20] <jawnas> Why does OSX look sharper on my screen than ubuntu? Is there a technical reason or is that just my imagination?
[01:20] <Dr_Willis> jawnas,  Imagination :)  from waht ive seen.
[01:20] <Dr_Willis> jawnas,  or they got nicer fonts..
[01:20] <Ashok_> can someone help me fix my ati drivers so glx works?
[01:21] <mhall119> jawnas: different resolutions, DPI settings, anti-aliasing, etc
[01:21] <Dr_Willis> jawnas,  you are running the native res of the lcd on both?
[01:21] <mint> Dr_Willis: thanks, good explanation. i just have lots of hdd's and want to test linux
[01:21] <jawnas> I read somewhere that they used vector images for everything on the screen, I found that hard to believe
[01:21] <constantine_> has anyone had any good/bad experience with juniper vpn?
[01:21] <steelcityjim> how do I open permissions in ubuntu desktop
[01:21] <jawnas> Dr_Willis: Yes, I am. Both on the same exact resolution
[01:21] <jrib> steelcityjim: what do you mean?
[01:22] <Ashok_> anyone? ati driver help so i can run glx?
[01:23] <n\median> hello! can anyone help me? i accidentally erased passwd file! how can i recover it?
[01:23] <mhall119> n\median: not much you can do about that
[01:23] <n\median> isnt passwd- backup?
[01:24] <jawnas> Try some data recovery software
[01:24] <jawnas> ext3 isn't very friendly when it comes to those, though.
[01:24] <Crescent_4rZ> irc.mild.net
[01:24] <mhall119> n\median: do you still have the shadow file?
[01:24] <n\median> whats that?
[01:25] <doubletoker> should I have anything in my Software Sources under Authentication
[01:25] <mhall119> n\median: the file where all the hashed passwords are stored
[01:25] <mhall119> /etc/shadow
[01:25] <mhall119> it would at least tell you what user accounts you had in /etc/passwd
[01:25] <steelcityjim> if files are listed as read only in windows can they be copied?
[01:25] <doubletoker> I can't seem to install APACHE or MYSQL, they aren't in my list
[01:26] <jawnas> steelcityjim: Yes they can
[01:26] <doubletoker> when I type apache in synaptic nothing is there
[01:26] <Jack_Sparrow> !lamp
[01:26] <steelcityjim> im unable to copy files from windows to my samba share can anyone assist
[01:26] <doubletoker> yea I already did that, using apt-get, don't allow me to get the packages either
[01:26] <rdw200169> doubletoker, just use tasksel
[01:26] <doubletoker> ok
[01:26] <n\median> mhall119 yes
[01:26] <doubletoker> ty rdw
[01:26] <n\median> i have it
[01:27] <n\median> now what?
[01:27] <Jack_Sparrow> !who
[01:27] <Dr_Willis> steelcityjim,  i find its often a good idea to read the 'using samba' book in the 'samba-docs' package. it has  some examples of making public shares and troubleshoioting guides/tips. and it has good fundamental info on using samba.
[01:27] <Dr_Willis> !info samba-doc
[01:27] <mhall119> n\median: you can't restore your passwd file, but you can probably re-use 90% of a working copy from another box
[01:28] <n\median> i would love that
[01:28] <n\median> how can i do that?
[01:28] <doubletoker> haha
[01:28] <doubletoker> tasksel
[01:28] <mhall119> do you have another Ubuntu box?
[01:28] <n\median> no
[01:28] <Ashok_> can anyone help me get glx working on my ati drivers?
[01:28] <n\median> i have not
[01:28] <mhall119> do you have a LiveCD?
[01:28] <doubletoker> : aptitude failed (100)
[01:28] <n\median> i havent... its a rented vps
[01:29] <mhall119> vps?
[01:29] <doubletoker> guess I'm back to reinstalling debian on this
[01:29] <steelcityjim> cannot access or replace make sure disk is not full or file is not being used
[01:29] <steelcityjim> why would i be getting this error
[01:29] <n\median> vps - virtual private server...
[01:29] <mhall119> oh
[01:29] <mhall119> just ask the people you're renting it from to help you restore it
[01:29] <n\median> :S
[01:29] <bjt8764> i have an irc question
[01:30] <n\median> non working hours
[01:30] <jawnas> If it's managed then they should have backups
[01:30] <bjt8764> how can i see the names of other people in this room  ?
[01:30] <Ashok_> can anyone help me getting glx set up for my ati driver? right now its broken....
[01:30] <mhall119> you don't have 24/7 support?
[01:30] <H4ck3r07> hey
[01:30] <n\median> i have not... thats premium service
[01:30] <bjt8764> how can i see the names of other people in this room  ?
[01:30] <H4ck3r07> does anyone know how to program in cd
[01:30] <bjt8764> is there a command to show this information ?
[01:30] <mgolisch>  /names ?
[01:30] <H4ck3r07> c
[01:31] <mhall119> bjt8764: type /help for all commands
[01:31] <bjt8764> thanks mhallig :)
[01:34] <bjt8764> if you like ravey music.. like i do.. then you might like this:  http://www.mdmarchive.co.uk/archive/homePage.php
[01:34] <constantine_> I'm trying to setup open VPN but it is asking for a gateway, except I use multiple routers - how can I set up so that it picks up the strongest one, like network manager does?
[01:34] <bjt8764> or.. you might not :)
[01:35] <jrib> bjt8764: please stay on the topic of ubuntu support
[01:35] <Jufis> how to find out (via terminal) the linux distribution's name and version?
[01:35] <steelcityjim> ok how do i set the permissions on samba share desktop
[01:35] <jrib> Jufis: lsb_release -a will work if you are using ubuntu
[01:35] <Weehawky> Why would be something to make an ISO in Ubuntu ?
[01:36] <passive1> Is there Mono 2.2 deb package for ubuntu ?
[01:36] <shabati> constantine_: Is OpenVPN actually complicated? Or am I just not smart enough for it?
[01:37] <Jufis> jrib: it's a friend's server so I don't know if it's ubuntu or not. I connect via ssh
[01:37] <jrib> Jufis: well did you try the command?
[01:37] <Jufis> wait
[01:38] <constantine_> shabati: what?
[01:38] <bjt8764> is there anyway i can 'ping' a user .. to alert him/her back to the irc chat room  ?
[01:38] <steelcityjim> how do i set the permissions on ubuntu desktop my samba share is not allowing files to be moved to it
[01:38] <jrib> bjt8764: just use his nick.  Most clients will grab the user's attention then
[01:38] <bjt8764> coool.... thanks jrib :)
[01:39] <Jufis> bjt8764: and if you want to set it up for yourself, then look for something called "highlight" :)
[01:39] <__mikem> jrib, apt keeps freezing whenever I try to download the nvidia drivers
[01:39] <Weehawky> I'm seeing that I can try cat /dev/scd0 > /some/place/name.iso ?
[01:39] <jrib> __mikem: pastebin.  and what exactly do you mean by freezing?
[01:40] <Dr_Willis> Weehawky,  often one uses 'dd' instead of cat.. but i think cat can work also
[01:40] <steelcityjim> samba share in desktop?
[01:40] <__mikem> jrgp, it doesn't matter how I do it, if I try to enable desktop graphics, or if I try to enable restricted nvidia drivers, when the window that says "downloading packages" comes up, the progress bar stays at 0%
[01:40] <steelcityjim> anyone?
[01:40] <Jack_Sparrow> !patience
[01:40] <__mikem> jrib, ^
[01:41] <Weehawky> Dr_Willis, Will this make the ISO bootable as if I copied it from CD to CD , or DVD to DVD ?
[01:41] <spaceBARbarian> hi is there a way to synchronize the contents of two folders ?
[01:41] <Dr_Willis> Weehawky,  its an identical clone.. so yes. it should
[01:41] <steelcityjim> how does samba communicate with windows passwords and access from windows networks
[01:41] <jrib> __mikem: use apt-get in a shell
[01:42] <__mikem> jrib, I don't know the name of the package
[01:42] <Weehawky> Dr_Willis, OK.  I'm looking for a way to keep my XP on disk.  I'm tired of digging it out for virtualbox
[01:42] <SchighSchagh> hey guys. is there a config file or something where I can set what keyboard layout gnome should use?
[01:42] <SchighSchagh> (running intrepid, fully updated)
[01:42] <zayn> 'ello
[01:42] <jrib> __mikem: nvidia-glx-VERSION
[01:42] <Weehawky> Dr_Willis, Also I want to make a spare copy anyway.
[01:42] <Tardious> Everytime I boot my laptop up My wifi asks me for myh keyring password (is there anywway to turn that off so it just connects automatically ?
[01:42] <constantine_> shabati: how did that answer my question?
[01:42] <__mikem> jrib, so nvidia-glx-177?
[01:42] <Weehawky> (to CD also)
[01:42] <jrib> __mikem: sure
[01:42] <Jufis> jrib: didn't work. (the question about how to find out what distribution and version via terminal)
[01:42] <spaceBARbarian> hi is there a way to synchronize the contents of two folders ?
[01:43] <snegtul> rsync
[01:43] <Weehawky> I have another question.  How come when I sudo ifconfig eth0 down , it doesn't stay down and reconnects ?
[01:43] <jrib> spaceBARbarian: unison or rsync
[01:43] <jrib> Jufis: then it's not ubuntu
[01:43] <Weehawky> is it possible for it to stay disconnected even though there is things trying to reconnect ?
[01:43] <coky> hi any1
[01:43] <Dr_Willis> Weehawky,  i do a similer thing for my os disks :)
[01:43] <coky> im having trouble uninstall gyache
[01:43] <jrib> Jufis: sometimes you can get a hint from /etc/issue but this isn't an ubuntu question anymore
[01:43] <coky> on ubuntu intrepid
[01:44] <Weehawky> Dr_Willis, I just have to find a way for it to not want to authorize
[01:44] <snowman> i'm running from a live session at the moment, when i try to install, the installer doesn't detect my hdd for partitioning. Any ideas?
[01:44] <Jufis> jrib: thanks anyway.
[01:44] <constantine_> Shabati: if I wanted Nick Burns, I'd go to my company's computer department, just because it seems basic to you, doesn't mean I haven't tried to find the answer, try to remember that former windows users aren't used to hunting down 5 steps to install their apps or their 10 settings
[01:44] <Weehawky> Dr_Willis,  I'm afraid I'll mess up my licensee as if I installed it on a second computer.
[01:44] <__mikem> jrib, that never happened before, and this is a fresh install. Whats going on?
[01:45] <Jack_Sparrow> snowman To get live cd to show your missing hard drive this often helps..At start or install press F6 and add all_generic_ide before the "--"
[01:45] <Tardious> Everytime I boot my laptop up My wifi asks me for myh keyring password (is there anywway to turn that off so it just connects automatically ?
[01:45] <shabati> Jufis: ls /etc | grep release
[01:45] <jrib> __mikem: ?
[01:45] <zayn> anyone know how to reinstall my vista OS to the GRUB menu?  (in simple terms plz - newbie here!!)
[01:45] <Dr_Willis> Weehawky,  that will most likely be the case.   of course discission of ways around that.. are proberly not  for here. :)
[01:45] <__mikem> jrgp, the terminal worked fine, but whenever I tried to download the nvidia drivers through the GUI, it just hanged at 0%
[01:45] <__mikem> darn it
[01:45] <Jack_Sparrow> !grub > zayn
[01:45] <__mikem> jrib, ^
[01:45] <Weehawky> lol
[01:45] <SchighSchagh> how do I configure what keyboard layout the Guest account on my computer (intrepid, fully updated) uses? obviously I can set it when I log in, but I don't want to have to do that every time I log in since it clears all settings when I log out...
[01:46] <Tardious> zayn,  You have the vistas CD still ? Just boot into that and select "Fix"
[01:46] <Chaorain> Does any one know what clone output does in compiz?
[01:46] <Dr_Willis> zayn,  in the strt of the menu.lst file is an example 'entry' for booting windows from the first hard drive/first partition. I  normally just uncomment it. and  it works.. if yoy are meaning to ask HOW to add a windows entry to the grub menu
[01:46] <zayn> the laptop didn,t come with the disc
[01:46] <SchighSchagh> Chaorain: it should output the same thing to both monitors
[01:46] <snowman> jack, the install from live, or from startup?
[01:47] <Jack_Sparrow> snowman when you start live
[01:47] <Weehawky> Dr_Willis, The ISO from disk seems to run twice or better faster than from the DVD+-RW drive
[01:47] <Chaorain> SchighSchagh, Ah thats why it acts weird with one monitor
[01:47] <Chaorain> SchighSchagh, thanks
[01:47] <snowman> jack, will try...be back soon
[01:47] <Dr_Willis> Weehawky,  in vmware/birtualbox. yes.. using a .iso file will be MUCH MUCH faster
[01:48] <jrib> __mikem: don't know.  You are referring to jockey-gtk?
[01:48] <__mikem> jrib, I think so
[01:48] <__mikem> I don't know for sure what its called
[01:48] <Weehawky> Dr_Willis, Would it be possible for me to not have to run virtualbox as root ?
[01:48] <jrib> __mikem: try opening it in a terminal
[01:48] <Chaorain> Does anyone know its possible to get my bluetooth mouse to link with ubuntu on my laptop without unlinking it from vista on the same laptop
[01:49] <Dr_Willis> Weehawky,  i dont recall having to run it as root..
[01:49] <Weehawky> Dr_Willis, It complains of things after making the fixed disk space
[01:49] <Weehawky> Dr_Willis,  (if I don't)
[01:50] <__mikem> jrib, one other problem, I installed nvidia's drivers now, but I can't get desktop-effects to enable. ANd I know they have worked on this machine in the past
[01:50] <jrib> __mikem: did you reboot?
[01:50] <unused_bagels> I'm trying to compile an intel 945G graphics chipset and I got this when I typed make: http://pastebin.com/m16241da7
[01:50] <Weehawky> Dr_Willis, "The VirtualBox kernel driver is not accessible to the current user. Make sure that the user has write permissions for /dev/vboxdrv by adding them to the vboxusers groups. You will need to logout for the change to take effect."
[01:51] <__mikem> jrib, never had to before :(
[01:51] <Dr_Willis> Weehawky,  i dont recall ever having that problem. But i havent messed with  vbox in linux in a month+
[01:51] <Dr_Willis> Weehawky,  theres the issue then it iseems.. user not in the right groups.
[01:51] <jrib> __mikem: yes you did, or at least load the module and restart X...
[01:51] <Weehawky> Dr_Willis, How would I fix that
[01:51] <__mikem> jrib I'll try restarting
[01:51] <SchighSchagh> how do I configure what keyboard layout the Guest account on my computer (intrepid, fully updated) uses? obviously I can set it when I log in, but I don't want to have to do that every time I log in since it clears all settings when I log out...
[01:51] <Dr_Willis> !groups
[01:52] <Tardious> Everytime I boot my laptop up My wifi asks me for myh keyring password (is there anywway to turn that off so it just connects automatically ?
[01:52] <Dr_Willis> Weehawky,  i do it the old-skool way and edit the /etc/groups file :)
[01:52] <WebcamWonder> Guys, quick question. Which models of nVidia does the new Xorg with Intrepid have incompatibility issues? More specifically, right now I am on hardy and running the 180.22 from nVidia's site on a 6150 Geforce Go. Would this have any trouble with the newer Xorg?
[01:52] <Dr_Willis> Weehawky,  but thats not the safext way
[01:52] <jrib> Weehawky: adduser USER GROUP
[01:53] <Weehawky> jrib, So I would "adduser n virtualbox" ?
[01:53] <spaceBARbarian> would it better to use Dropbox or shared folders in vbox ?
[01:53] <jrib> Weehawky: your username is "n"?
[01:53] <Weehawky> yes
[01:53] <evilGUI> Is it a bad idea to use the root mysql account?
[01:53] <__mikem> jrib, rebooting did not work
[01:53] <jrib> Weehawky: ok, well you need to prefix it with "sudo " and "virtualbox" is not the group in the error message, so you probably want to change that
[01:54] <jrib> __mikem: pastebin your /etc/X11/xorg.conf and /var/log/Xorg.0.log
[01:54] <__mikem> hold on
[01:54] <Weehawky> jrib, I am not understanding how I would add myself to the "group"
[01:54] <unused_bagels> I'm trying to compile an intel 945G graphics chipset and I got this when I typed make: http://pastebin.com/m16241da7
[01:54] <spaceBARbarian> what is a .deb file ?
[01:54] <jrib> Weehawky: sudo adduser NAME_OF_USER NAME_OF_GROUP
[01:54] <unused_bagels> spaceBARbarian: double click.
[01:54] <evilGUI> spaceBARbarian: It's a package.
[01:54] <Jufis> jrib: cat /etc/issue solved the problem
[01:55] <unused_bagels> spaceBARbarian:  it's like an exe or msi file, you use it to install programs.
[01:55] <Weehawky> jrib, And how do I know the 'group's name'
[01:55] <jrib> Weehawky: the error message you pasted before has the name of the group
[01:55] <Weehawky> oh
[01:55] <WebcamWonder> !deb | spaceBARbarian
[01:55] <Weehawky> vboxusers
[01:55] <jrib> Weehawky: yes
[01:55] <rambo298> is there an ubuntu tool to display the initial response to an HTTP GET?  I want to verify that the HTTP status response is what it should be
[01:56] <Weehawky> jrib, my user is added.  I guess I need to logout/in /
[01:56] <jrib> rambo298: telnet?
[01:56] <Weehawky> ?
[01:56] <fabio> there is a firefox plugin
[01:56] <jrib> Weehawky: yes
[01:56] <WebcamWonder> rambo298: curl/cuil?
[01:56] <rambo298> jrib: so telnet to port 80 and manually enter the HTTP GET?
[01:56] <unused_bagels> spaceBARbarian:  it's like an exe or msi file, you use it to install programs.
[01:56] <unused_bagels> I'm trying to compile an intel 945G graphics chipset and I got this when I typed make: http://pastebin.com/m16241da7
[01:57] <jrib> rambo298: using the proper syntax, yeah
[01:57] <webterror> howto install old linux-headers-2.6.24 package in ubuntu?
[01:57] <webterror> i'm using 2.6.27 kernel version now.
[01:58] <__mikem> jrib, http://pastebin.com/d2968b0d6
[01:58] <WebcamWonder> Which models of nVidia are no longer supposed to be upgrade for the newer version of Xorg in Intrepid?
[01:58] <spaceBARbarian> is there a text editor equivalent to Notepad++ for ubuntu ?
[01:58] <rogue_> hello
[01:58] <webterror> but i wan't install 2.6.24 kernel headers package;
[01:58] <rogue_> hello
[01:58] <fabio> webterror, dpkg -i ??
[01:58] <unused_bagels> I'm trying to compile an intel 945G graphics chipset driver and I got this when I typed make: http://pastebin.com/m16241da7
[01:59] <jrib> __mikem: you aren't using the nvidia driver
[01:59] <jrib> in your xorg.conf-
[01:59] <jrib> unused_bagels: why are you compiling it?
[01:59] <Ashok_> can anyone help me get glx set up on intrepid with ati drivers?
[01:59] <webterror> dpkg -i
[01:59] <__mikem> jrib, I know for a fact I installed it, so why is my xorg.conf file not right?
[01:59] <jrib> __mikem: the two are not related
[01:59] <maquina4> hola
[01:59] <snowman> @jack, restarted then forgot what to do. lol silly me, what was it again?
[01:59] <rogue_> hey guy's i got a good Q and i need a descent A on usb devices
[02:00] <maquina4> alguien que hable español
[02:00] <__mikem> jrib, also see my pm
[02:00] <Pici> !es | maquina4
[02:00] <unused_bagels> jrib because my driver sucks, and I am desperately trying to play some dang games without having to dual boot.
[02:00] <rogue_> hello
[02:00] <rogue_> ....
[02:00] <jrib> __mikem: specify nvidia as the driver and restart X
[02:00] <unused_bagels> or buy a new grafix caRD cos i'm poor.
[02:00] <WebcamWonder> !hello | rogue_
[02:00] <Ashok_> can anyone help me get glx set up on intrepid with ati drivers?
[02:00] <rogue_> hey can you help
[02:01] <jrib> unused_bagels: what exactly are you compiling?
[02:01] <WebcamWonder> !anyone | rogue_
[02:01] <__mikem> jrib, I don't know how to specify it, as I never had to do so in the past. I never had these problems with this in the past.
[02:01] <spaceBARbarian> is there a text editor equivalent to Notepad++ for ubuntu ?
[02:01] <jrib> spaceBARbarian: gedit?
[02:01] <rogue_> yea can you help
[02:01] <rogue_> it's on usb devices
[02:01] <WebcamWonder> rogue_: If you ask your question, sure I might be able to help
[02:01] <fabio> jrib do you lie gedit ?
[02:01] <spaceBARbarian> jrib: gedit doesnt have nearly as men features tho
[02:01] <fabio> like*
[02:01] <WebcamWonder> spaceBARbarian: vim? emacs?
[02:02] <jrib> fabio: I use vim, but gedit is fine
[02:02] <progre55> hey people! A quick modprobe.d question please.. in the alsa-base file, can I have two nearly same options? say, "options snd-hda-intel model=hippo" and "options snd-hda-intel model=vaio position_fix=0"??
[02:02] <__mikem> jrib, ^^
[02:02] <jrib> spaceBARbarian: are you aware of the many plugins available for gedit?
[02:02] <Ashok_> I get an error when I try to run the glxgears command using the proprietary ati drivers
[02:02] <jrib> __mikem: http://paste.ubuntu.com/117903/ is mine.  If you want it to "just work" then debug jockey-gtk
[02:02] <spaceBARbarian> jrib: i dont, how do i instlal the plugins ?
[02:03] <mai-five> are there any security issues in chgrp update-manager?  i'm sure there's a better way around what i'm thinking but this seems easier... assuming now potential security issues...
[02:03] <mai-five> also assuming i can chgrp of update-manager
[02:03] <jrib> spaceBARbarian: there are many available in edit -> preferences already.  See also http://live.gnome.org/Gedit/Plugins
[02:03] <spaceBARbarian> okay thks
[02:03] <rogue_> webcamwonder
[02:03] <jrib> mai-five: what are you trying to do?
[02:04] <progre55> hey people! A quick modprobe.d question please.. in the alsa-base file, can I have two nearly the same options? say, "options snd-hda-intel model=hippo" and "options snd-hda-intel model=vaio position_fix=0"??
[02:04] <WebcamWonder> rogue_: ?
[02:04] <WebcamWonder> !pm | rogue_
[02:04] <rogue_> private chat
[02:04] <rogue_> ok
[02:04] <unused_bagels> jrib I can't find any other way to install it.  synaptic's full of stff I don't understand, and the intel website had this one.
[02:04] <mai-five> well i don't want a user(s) in sudoers but i want to automate updates without me there to enter password
[02:04] <Obituary> hi
[02:04] <rogue_> as far as a usb device goes
[02:04] <jrib> unused_bagels: *which* one?
[02:04] <rogue_> there are solder points
[02:05] <lard|arse> savvas: bug report finally posted (had to decide what to write and to follow guidelines for bug reports on that package), link is https://bugs.launchpad.net/ubuntu/+source/linux/+bug/329278 - will I receive e-mail whenever there is activity on this bug report?
[02:05] <Obituary> can you please tell me why my computer goes slow when i enter to a game??
[02:05] <Obituary> with ubuntu
[02:05] <__mikem> jrib, okay, it STILL isn't working
[02:05] <rogue_> vcc, gnd, d+, d-
[02:05] <jrib> __mikem: you restarted X?
[02:05] <WebcamWonder> !offtopic | rogue_
[02:05] <mai-five> btw its 8.04
[02:05] <Obituary> i have 8.10
[02:06] <__mikem> jrib, yes
[02:06] <jrib> __mikem: pastebin the files I asked you to pastebin before again
[02:06] <__mikem> hold on
[02:07] <rogue_> if i were to put a dip switch on the d- wired solder point would it produce a lag but still keep connected as a device and just lag or is this not possible?
[02:07] <bastid_raZor> mai-five; you could add something like : username ALL=(ALL) NOPASSWD:/usr/bin/aptitude : to your sudoers so that you wouldn't need a passwd for aptitude to run.. not the best way but it works
[02:07] <Blade_Wizard_Fal> trying to update my system, i get the following error: "E: /var/cache/apt/archives/linux-image-2.6.24-23-generic_2.6.24-23.46_i386.deb: corrupted filesystem tarfile - corrupted package archive" can anyone help?
[02:08] <rogue_> anyone ????
[02:08] <WebcamWonder> rogue_: This is an Ubuntu support channel. Please take your questions to #ubuntu-offtopic
[02:08] <spaceBARbarian> can someone explain how to use dropbox for ubuntu, i installed the package but i dont know where to go from here
[02:08] <bastid_raZor> mai-five; please don't do that.
[02:09] <WebcamWonder> spaceBARbarian: Log out/Login... And you should see a dropbox icon in the notification area
[02:09] <chu_> I was wondering if anyone here is running 9.04?
[02:09] <jrib> !jaunty | chu_
[02:09] <WebcamWonder> !jaunty | chu_
[02:09] <fabio> chu_, me
[02:09] <bastid_raZor> chu_; #ubuntu+1
[02:09] <rogue_> anyone have knowledge on wiring usb devices
[02:09] <Obituary> me 8.10
[02:09] <__mikem> jrib, nvm, had a typo in the file
[02:09] <Obituary> but games doesnt work
[02:09] <chu_> !jaunty
[02:09] <jrib> rogue_: not here, take that elsewhere please
[02:09] <rogue_> ???
[02:09] <Obituary> i installed nexuiz and cant move
[02:10] <rogue_> where
[02:10] <WebcamWonder> !offtopic | rogue_
[02:10] <rogue_> kk thx
[02:10] <rogue_> exit
[02:10] <unused_bagels> jrib: did you catch that up thar?
[02:10] <spaceBARbarian> how do i get mirc to inser the name i doubleclick in the chat box ?
[02:10] <jrib> unused_bagels: yes, did you catch my response?
[02:10] <WebcamWonder> spaceBARbarian: Use tab completion. Enter a first few characters, and hit tab
[02:10] <job> help please
[02:11] <unused_bagels> jrib: which one what? card, or game?
[02:11] <Sa[i]nT> How do I add myself to the fuse group?
[02:11] <spaceBARbarian> WebcamWonder: i know about that, but i thought there was also a way to simply double click on someone's name and have it copied to the chatbox
[02:11] <zamarax> hi in this video the user has a compiz fusion plugin that kind of bumps windows one in front the next when they click on them http://www.youtube.com/watch?v=x4fTh0x3xLE&feature=PlayList&p=FE8D0432C129C592&playnext=1&index=1 does anyone know wha that is? I'm trying to get the same effect
[02:12] <Sa[i]nT> I'm trying to sync my iphone with ubuntu.
[02:12] <fabio> adduser
[02:12] <bastid_raZor> Sa[i]nT; you could manually edit /etc/group
[02:12] <WebcamWonder> spaceBARbarian: Don't know about that. Most people over here don't use mIRC since we are on Linux :)
[02:12] <Ashok_> http://www.imeem.com/electronicmusic/music/NsacUrkz/tiesto_driving_to_heaven/
[02:12] <Ashok_> whoops
[02:12] <Ashok_> wrong thing on the clipboard....
[02:12] <job> ubuntu doesn't recognize new sound card.  help please
[02:12] <progre55> hey people! A quick modprobe.d question please.. in the alsa-base file, can I have two nearly the same options? say, "options snd-hda-intel model=hippo" and "options snd-hda-intel model=vaio position_fix=0"??
[02:12] <Ashok_> I'm having trouble with glx on intrepd with the ati proprietary driver
[02:12] <Ashok_> @job is it a x-fi?
[02:13] <job> sorry don't understand x-fi
[02:13] <Ashok_> the card
[02:13] <Ashok_> a creative x-fi
[02:13] <Ashok_> ?
[02:13] <job> Dynex card
[02:13] <Ashok_> huh...there goes my idea
[02:13] <spaceBARbarian> WebcamWonder: i logged in and out and i still dont see anything for dropbox, i should add that im using Xubuntu as guest in virtuabox
[02:14] <job> works with vista
[02:14] <WebcamWonder> spaceBARbarian: Oh Xubuntu. Then you won't see any graphics attached to dropbox. The dropbox plugin is for nautilus (gnome)
[02:14] <mai-five> i was thinking something along the lines of a script to run "sudo apt-get update && apt-get upgrade" but not needing the sudo because the user is in the same group as update-manager (which is currently gid root)
[02:14] <unused_bagels> SO! One guy told me he set up GEM and phoronix, and now he can play games with his intel graphics chipset....
[02:14] <wartalker> how to know which bash i am runing
[02:14] <thesnowman> is there any way to mount multiple partitions automatically on startup?
[02:14] <unused_bagels> how would I go about doing that?
[02:15] <WebcamWonder> spaceBARbarian: However, the daemon would be working in the background (hopefully), see if you have a ~/Dropbox/ and try putting some files in there
[02:15] <mai-five> but if there are security flaws....  or hell, if that's even the right program...
[02:15] <bastid_raZor> mai-five; you could switch out aptitude for apt-get and have a script that runs the program..
[02:15] <WebcamWonder> !fstab | thesnowman
[02:16] <thesnowman> ok doke thanks
[02:16] <job> no luck then???
[02:16] <SchighSchagh> how can I make persistent changes/configuration to the Guest account (running intrepid, fully updated)
[02:16] <spaceBARbarian> WebcamWonder: it cant find that folder
[02:16] <spaceBARbarian> i guess it wont work then
[02:16] <WebcamWonder> job: lspci, to get a list of the hardware attached, your sound card should show up
[02:16] <WebcamWonder> spaceBARbarian: I am pretty sure you can make it work if you want to try to fool around with it
[02:17] <spaceBARbarian> WebcamWonder: i think it might be easier for me to just install ubuntu lol
[02:17] <unused_bagels> One guy told me he set up GEM and phoronix, and now he can play games with his intel graphics chipset.... how would I go about doing that?
[02:17] <spaceBARbarian> WebcamWonder: i need fast performance so should i install an older version maybe "(running Vbox)
[02:17] <mai-five> aptitude could work too.... but i was hoping it'd be non-interactive... just a yes-to-all as it were.... the user is not terribly savvy you see
[02:17] <job> Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller
[02:18] <WebcamWonder> spaceBARbarian: Well, Xubuntu is driven towards a lower end pc, so it shoudl be fine. If you want, you can manually start the daemon and it should sync everything int he background
[02:18] <mib_v07zdy> Any staff here?
[02:18] <jrib> mib_v07zdy: why?
[02:18] <lstarnes> mib_v07zdy: staff of what?
[02:19] <Ashok_> can anyone help me get glx working on my system?
[02:19] <spaceBARbarian> WebcamWonder: any clue where i can find info on how to manually start it ?
[02:19] <mib_v07zdy> nvm. I want to make a dvd instead of cd from the ubuntu downlaod. Is that possible?
[02:19] <fabio> Ashok i use open mesa
[02:19] <WebcamWonder> spaceBARbarian: See if you have a ~/.dropbox-dist/dropbox (this should be a hidden folder)
[02:19] <WebcamWonder> spaceBARbarian: .dropbox-dist should be hidden
[02:19] <bastid_raZor> mai-five; aptitude with the -y option does that
[02:19] <Ashok_> fabio: whats the difference?
[02:19] <WebcamWonder> !dvd | mib_v07zdy
[02:20] <WebcamWonder> mib_v07zdy: Oops, not the factoid I wanted
[02:20] <fabio> are you using open source radeon ?
[02:20] <mib_v07zdy> me?
[02:20] <Ashok_> no...to get the x server to run i had to sell my soul to the proprietary driver devil
[02:20] <spaceBARbarian> WebcamWonder" no hidden dropbox files / folders in ~
[02:21] <WebcamWonder> spaceBARbarian: So, no /.dropbox-dist ?
[02:21] <mib_v07zdy> is there a way to do what i want?
[02:21] <WebcamWonder> spaceBARbarian: So, no ~/.dropbox-dist ?
[02:21] <job> ubottu, hope that was for me.  i will try those pages. thanks
[02:21] <spaceBARbarian> WebcamWonder: yeah nothing
[02:21] <Ashok_> fabio: does that mean i cant use openmesa?
[02:21] <Sa[i]nT> Anyone has any exp syncing their iphone with ubuntu?
[02:21] <spaceBARbarian> WebcamWonder: lemme try reinstalling the package
[02:21] <fabio> Ashok_ my radeon card is only supported by radeon so i use the mesa opengl
[02:22] <mib_v07zdy> is there a site to look at?
[02:22] <fabio> but i suppose that for the fglrx driver there is something different
[02:22] <mai-five> lol thanks bastid i think i'll use aptitude instead of apt-get from now on.... but barring a change to sudoers, i still need administrative privs.... is that not something that's dicated by gid?
[02:22] <WebcamWonder> mib_v07zdy: DVD: http://cdimage.ubuntu.com/releases/intrepid/release/
[02:23] <spaceBARbarian> WebcamWonder: reinstalled the package, still no .dropbox stuff
[02:23] <mib_v07zdy> umm.... will the cd version work?
[02:23] <SchighSchagh> how can I make persistent changes/configuration to the Guest account (running intrepid, fully updated)
[02:24] <WebcamWonder> spaceBARbarian: Perhaps it is b/c dropbox plugin itself doesn't start to download the dropbox daemon. Goto their forums, and grab their forum builds, and extract it using the command they give. That should bring in the daemon for you
[02:24] <bastid_raZor> mai-five; editing the /etc/sudoers with that info i gave you will only affect aptitude. that will let aptitude run without having to type a passwd
[02:24] <green__> hi, the sound on my laptop doesnt work, I'm using 8.10 and I've tried all the fixes in the forum, can someone help me?
[02:24] <spaceBARbarian> WebcamWonder: meh, ill just install hardy
[02:24] <WebcamWonder> !sound | green__
[02:25] <WebcamWonder> spaceBARbarian: You can make it work if you want to. It just won't work as "hassle-free". But GNOME is less minimal than XFCE. So a little slower in your VB
[02:25] <mib_v07zdy> WebcamWonder, if I put the cd version on a dvd-r, will it work?
[02:25] <WebcamWonder> mib_v07zdy: DVD versions are available. Why do you want to make your own DVD?
[02:25] <Xenos> Hm. Newb question: How do I make a keyboard shortcut to start an application? (Like, say, a file manager with ctrl+alt+f )
[02:26] <secvuln> Hello
[02:26] <secvuln> I have a slight problem.
[02:26] <mib_v07zdy> WebcamWonder: because I do not know how to do it with a cd. Will it load in boot?
[02:26] <spaceBARbarian> WebcamWonder: would it be beneficial to do install 8.04 over 8.10 in terms of performance ? i have a good graphics card but a slow HD and only 2gb RAM.
[02:26] <mai-five> bastid_raZor: thank you, i'll give it a shot... unfortunately i have to wait until monday
[02:26] <green__> green@green-laptop:~$ !sound |
[02:26] <green__> bash: !sound: event not found
[02:26] <green__> ?
[02:26] <bastid_raZor> Xenos; system>preferences>keyboard shortcuts
[02:27] <Dr_Willis> green__, ! stuff is 'bot' commands in the channel
[02:27] <Dr_Willis> !bot | green__
[02:27] <zcat[1]> is there a way to make the taskbar clock text white instead of black?
[02:27] <bastid_raZor> mai-five; i like to use aptitude safe-upgrade
[02:27] <green__> ah ok
[02:27] <mai-five> safe-upgrade?
[02:27] <WebcamWonder> spaceBARbarian: Hardy is LTS. So, it would be supported for a greater amount of time. In terms of performance, shouldn't be much diff
[02:27] <Xenos> bastid_raZor:  Yes, that lets me set keyboard shortcuts to specific window tasks, etc. I want to set keyboard shortcuts to open specific applications
[02:27] <mib_v07zdy> WebcamWonder:  How do I install Ubuntu with the CD version?
[02:28] <secvuln> I have a live cd. But I have ubuntu installed on an external harddrive. However, the box's BIOS does not have a boot from usb option. Is there any way I can boot into the usb from the live cd?
[02:28] <WebcamWonder> !install | mib_v07zdy
[02:28] <glen_> Hello
[02:28] <glen_> Does anyone here use Webmin?
[02:28] <Gumby`> Does anyone here know if there is a way I can tell if my nic knows its connected to a gigabit switch or whether its in 100mb/s mode
[02:28] <jrib> !webmin | glen_
[02:28]  * secvuln bans head against wall
[02:29] <green__> !sound
[02:29] <glen_> Actually, it seems to be working ok
[02:29] <spaceBARbarian> WebcamWonder: Whats LTS again ?
[02:29] <glen_> But my problem is a module in it
[02:29] <WebcamWonder> !LTS | spaceBARbarian
[02:29] <WebcamWonder> spaceBARbarian: There is a factoid for everything :)
[02:29] <glen_> Does anyone here also use WU-FTP?
[02:29] <spaceBARbarian> WebcamWonder: well if its not much performance diff then i might as well go with intrepid
[02:30] <xfm> Hello! I work in bash. I would like to stock the result of a pipeline into a var. Is it possible?
[02:30] <WebcamWonder> spaceBARbarian: Since it is in a VB, it won't matter much anyways in terms of hardware
[02:30] <glen_> Well, does anyone know of a user or group who can include anyone with read/write access?
[02:30] <xfm> something like .... | var = echo
[02:30] <glen_> Huh?
  I have a live cd. But I have ubuntu installed on an external harddrive. However, the box's BIOS does not have a boot from usb option. Is there any way I can boot into the usb from the live cd?
[02:31] <WebcamWonder> xfm: #bash would be a better resource, I believe
[02:31] <jrib> glen_: what does that even mean?
[02:31] <glen_> What does what mean?
[02:31] <bonhoffer> what does the $! variable in bash do?
[02:31] <jrib> glen_: what you said...
[02:31] <xfm> WebcamWonder: yeah thanks
[02:31] <glen_> Ok, what I mean is, I want webmin full and complete access to a certain folder, so to what group and or user do I make the folder under?
[02:32] <mai-five> bastid_raZor: i really appreciate your help in this matter
[02:32] <jrib> glen_: webmin is not supported
[02:32] <glen_> But that was because of this package thing.
[02:32] <bastid_raZor> Xenos; xbindkeys may be what you're looking for :: http://ubuntuforums.org/showthread.php?t=79560&page=1
[02:33] <bastid_raZor> mai-five; glad i could help. good luck.
[02:33] <glen_> jrib, what do you think?
[02:33] <Xenos> bastid_raZor: Thanks :-)
[02:34] <glen_> jrib: Any response?
[02:34] <jrib> glen_: webmin isn't supported :/  If you want information about permissions see ubottu
[02:34] <jrib> !permissions > glen_
[02:35] <bastid_raZor> Xenos; good luck.
[02:36] <mib_v07zdy> Question: Should I downlaod both versions of Ubuntu? The WebServer and the other?
[02:36] <jrib> mib_v07zdy: why?
[02:37] <jrib> bonhoffer: #bash maybe
[02:37] <mib_v07zdy> I don't Know. Does anyone have the desktop version? What dies it have?
[02:37] <bonhoffer> jrib, thanks
[02:37] <mib_v07zdy> *does
[02:37] <zayn> if anyone can offer a newbie to ubuntu some grub menu help, please pm me
[02:37] <jrib> mib_v07zdy: if you want to use it on a desktop, use the desktop version.  If you want to use it on a server, use the server version.  They use the same repositories but have a different set of default packages
[02:37] <jrib> !ask | zayn
[02:38] <mib_v07zdy> Can you explain that? I want to use it for a webserver on my laptop
[02:39] <zayn> does /dev /sada7 mean I have 7 partitions?
[02:39] <mib_v07zdy> with apache, mysql, and php
[02:39] <secvuln> zayn, it can
[02:39] <jrib> mib_v07zdy: do you want a gui?  Or are you just sticking it in a closet somewhere?
[02:39] <illumin8> Will running your monitor in a lower resolution speed up grapical applications?
[02:39] <secvuln> zayn, but not nesserialy
[02:39] <mib_v07zdy> gui? I am a web coder, and i want to code on my laptop
[02:40] <WebcamWonder> zayn: sudo fdisk -l, to see a list of all partitions
[02:40] <jrib> mib_v07zdy: install the desktop version and then install apache and friends with:
[02:40] <jrib> !lamp | mib_v07zdy
[02:40] <zayn> I have multiple ubuntu and xubuntu entries but vista has disappeared.  any ideas as to how to reinstall it?
[02:40] <secvuln> zayn, don't
[02:40] <mib_v07zdy> I do not have internet. Do I need internet? If so, where can I find the rps?
[02:40] <mib_v07zdy> rpms
[02:40] <Xenos> Man is keyboard shortcuts in Ubuntu a mess :-/ Can't even figure out where the <super> + r is currently set (does weird zoom thing, annoying as f***)
[02:40] <secvuln> :)
[02:40] <WebcamWonder> zayn: Assuming you haven't overwritten the vista partition, you need to add a chainloader to your grub
[02:41] <jrib> mib_v07zdy: ubuntu doesn't use rpms
[02:41] <illumin8> vista is not cooperative when it comes to shareing space on a drive, many times it will entirly whipe your system to install itself
[02:41] <WebcamWonder> Xenos: Compiz, assuming you have it enabled
[02:41] <mib_v07zdy> oh, do i need internet?
[02:41] <zayn> ok how do I do that please?
[02:41] <bastid_raZor> Xenos; in compiz probably
[02:41] <bastid_raZor> !ccsm > Xenos
[02:41] <secvuln> anyone here know about ploop boot manager?
[02:42] <jrib> mib_v07zdy: no, you'll need to get the packages for what you want though.  It may be easier to install the server version and then use the alternate cd to install ubuntu-desktop as well.  I don't know if the alternate cd contains apache, php, etc
[02:42] <kindofabuzz> anyone use winetricks? i get this when trying to install stuff using winetricks: err:process:__wine_kernel_init boot event wait timed out
[02:42] <Xenos> Got compiz, not set there as far as I can see (general options->key bindings)
[02:42] <Snakedoc> tritium, ya here?
[02:42] <WebcamWonder> kindofabuzz: #winehq would be more helpful
[02:42] <mib_v07zdy> ok, so where can i find the alternet install?
[02:42] <kindofabuzz> WebcamWonder, yeah you're right
[02:42] <jrib> !alternate | mib_v07zdy
[02:42] <WebcamWonder> Xenos: You need to find and disable it in the compizconfig-settings-manager
[02:43] <zayn> so, after sudo fdisk - l - how do I safely remove unwanted partitions?
[02:43] <jrib> mib_v07zdy: you are using the alternate cd as a package repository after installing the server version (or at least that is my suggestion)
[02:43] <Xenos> WebcamWonder: Yes. Compizconfig-settings-manager,->general->general options_>key bindings
[02:43] <green_> !sound
[02:43] <mib_v07zdy> ok, can I download that?
[02:43] <Xenos> WebcamWonder: Nothing with <super> r or <mod4> r there
[02:43] <illumin8> zayn, i use gparted and you simply select them then remove them.
[02:44] <jrib> mib_v07zdy: yes...
[02:44] <WebcamWonder> Xenos: Compiz doesn't keep its key bindings centralized, they are scattered across all plugins. You woul dneed to persoanlly check all the plugins. I would suggest start with the ones involving zoom
[02:44] <zayn> i have gparted illumin8, thanks I'll try that
[02:44] <WebcamWonder> !gparted | zayn
[02:44] <robertc1985> can anyone here help me pinpoint a trouble in my WUBI installation?
[02:44] <WebcamWonder> !anyone | robertc1985
[02:44] <Xenos> WebcamWonder: Oh my :-/ Thanks.
[02:45] <zayn> thanks all - I'm off to give it a go
[02:45] <illumin8> i run games like savage in my ubuntu 8.04 install, will disabling compiz and desktop effects speed up the grapical applciations?
[02:45] <robertc1985> ok, why is my wubi installation all of a sudden very slow and programs like pidgin and firefox seem to freeze alot
[02:45] <mib_v07zdy> is it the torrent?
[02:45] <jrib> mib_v07zdy: no
[02:46] <node357> illumin8, yes it will
[02:46] <illumin8> node357, thank you
[02:46] <green_> hi, I cant get my sound to work, I've tried a lot of guides, can anyone help me
[02:46] <Xenos> WebcamWonder: Got it, thanks for the help :-)
[02:46] <WebcamWonder> robertc1985: Has it been consistantly slow for quite some time now?
[02:46] <jrib> mib_v07zdy: well yes, that's one way, but it's also on the download page
[02:46] <WebcamWonder> Xenos: No problems, glad to help
[02:46] <secvuln> I have a live cd. But I have ubuntu installed on an external harddrive. However, the box's BIOS does not have a boot from usb option. Is there any way I can boot into the usb from the live cd?
[02:46] <Xenos> And thanks to the rest of you as well
[02:46] <robertc1985> no, it seems to have started a few weeks ago
[02:46] <Sergeant_Pony> anyone know of a good program for managing my ipod under ubuntu?
[02:46] <jrib> !ipod | spaceBARbarian
[02:46] <jrib> Sergeant_Pony: see above
[02:46] <mib_v07zdy> i need the alternet
[02:46] <Sergeant_Pony> jrib, thanks
[02:47] <jrib> mib_v07zdy: yes, it's on the download page.  And it's also the torrent ubottu linked you to
[02:47] <robertc1985> when i first installed wubi 804 back in november it was very fast, but now it's grinding to a halt
[02:48] <WebcamWonder> robertc1985: Wubi is not meant to be for long term use, b/c of the way it handles partitions
[02:48] <histo> robertc1985: doesn't wubi run ubuntu under windows? or does it reboot?
[02:48] <WebcamWonder> histo: It runs Ubuntu natively off a large file inside the NTFS drive loopback mounted as an ext3 file partition
[02:48] <green_> !sound
[02:48] <illumin8> wubi runs under windows yes
[02:48] <robertc1985> it reboots, and i get a bootloader that lets me choose between OS'es
[02:49] <mib_v07zdy> how do i get to the alternet?
[02:49] <WebcamWonder> green_: I don't know much about this, but did you make sure that your sound card is even detected first?
[02:49] <green_> yes, i used aplay -l
[02:49] <robertc1985>  it's one big file, about 28 GB
[02:50] <WebcamWonder> green_: Ok, did you check whether the volume was not muted?
[02:50] <mib_v07zdy> lol
[02:50] <WebcamWonder> !alternate | mib_v07zdy
[02:50] <secvuln> No one seems to be able to answer my question.
[02:50] <histo> robertc1985: computers are like air conditioners they work fine until you start opening windows
[02:50] <green_> yes, i unmuted all possible playback in volume control, and put them on full
[02:50] <mib_v07zdy> lol
[02:50] <robertc1985> lol too true
[02:51] <WebcamWonder> green_: Ok, did you try playing something from aplay, specifically directly to your card?
[02:51] <green_> how do i do that?
[02:51] <robertc1985> well since i've actually had luck in windows occasionally running defrag, i wonder if that would help any?
[02:52] <WebcamWonder> robertc1985: Since you have a 30 gig file, it should help given that it is very unlikely that 30 gig is written as a linear file on your NTFS
[02:52] <WebcamWonder> green_: aplay -D<device_name from aplay -l> <filename>, I think that is the format
[02:52] <robertc1985> what i find odd is that only small programs tend to freeze, while when i watch movies in totem or play games like second life everything seems fine
[02:52] <Xenos> :-/ xbind-keys doesn't seem to work   (as in, the shortcuts it make don't do anything)
[02:53] <secvuln> No one seems to be able to answer my question. :'(
[02:54] <WebcamWonder> secvuln: We would have answered it, if we knew the answer. Contrary to popular belief, we do not hold the entire world's intelligence on this channel :)
[02:55] <histo> robertc1985: defragging ext3 is not necessary
[02:55] <WebcamWonder> histo: He was talking about NTFS
[02:55] <Xenos> using metacity seems to do better, tho
[02:55] <histo> robertc1985: something else is causing your issue but I don't know much about how wubi works.
[02:55] <histo> WebcamWonder: isn't wubi using ext3
[02:55] <robertc1985> wubi is similar to virtualization i think
[02:56] <WebcamWonder> histo: Please read my prior description as to how wubi works. It is not similar to virtualization
[02:56] <WebcamWonder> It runs Ubuntu natively off a large file inside the NTFS drive loopback mounted as an ext3 file partition
[02:56] <robertc1985> wubi actually uses ntfs or fat 32
[02:56] <histo> WebcamWonder: if it loopbacks and mounts it as ext3 t5hen its ext3
[02:56] <histo> WebcamWonder: and that file would not need to be defragged nor could it.
[02:57] <WebcamWonder> histo: Yes, but since it is actually inside an NTFS partition, it is very unliekly that it would be stored linearly, and if NTFS is defragged, performance can be improved
[02:57] <daniel928413> ubottu
[02:57] <dj_> help
[02:57] <daniel928413> ok
[02:57] <daniel928413> whats prob
[02:57] <inflex> I want to add some options to my xorg.conf to improve the perforance of my Intel 945GME graphics, however my xorg.conf is -blank- in /etc/X11 ... where does Ubuntu keep it's Xorg configs these days?
[02:57] <dj_> touchpadandpartof keyboarddont work
[02:57] <dj_> hence bad spacing
[02:57] <dj_> cutsinandout
[02:58] <WebcamWonder> inflex: Same place. There is a default x.org ubuntu defaults to, if it can't find one
[02:58] <green_> i got an eror
[02:58] <green_> green@green-laptop:~$ aplay -D "STAC92xx Analog"  test.mp3
[02:58] <green_> ALSA lib pcm.c:2196:(snd_pcm_open_noupdate) Unknown PCM STAC92xx Analog
[02:58] <green_> aplay: main:583: audio open error: No such file or directory
[02:58] <FloodBot2> green_: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[02:58] <daniel928413> floddBOt2
[02:58] <green_> sorry
[02:58] <inflex> WebcamWonder: okay, thanks... curious, since it did such a good job at adapting when I switched from my Duron box to my new Asus B202 PC
[02:59] <daniel928413> hello Should i switch to ubuntu from XP
[02:59] <green_> i put my file in my home directory, should it be somewhere else?
[02:59] <robertc1985> ok ubuntu is in a file that appears to ubuntu as en ext3 partition when in reality it is a file named root.disk on my c:\ drive
[02:59] <WebcamWonder> inflex: Yeah, it has had its good moments with some people, and its bad with others
[02:59] <daniel928413> Whats better UBUNTU or WIn XP
[02:59] <inflex> trolls.
[03:00] <prince_jammys> daniel928413: ubuntu xp is best
[03:00] <WebcamWonder> !offtopic | daniel928413
[03:00] <robertc1985> daniel, i only use xp when wine simply won't work
[03:00] <inflex> use VirtualBox if you must
[03:00] <WebcamWonder> green_: Home should be fine, since that is the default directory a new terminal default to. Are you sure that is the same name of the device you see from aplay -l?
[03:01] <bastid_raZor> robertc1985; then why are you messing with wubi? do a real install
[03:01] <robertc1985> well i'm going to see if i have any luck running defrag in windows
[03:01] <robertc1985> well i'm not good at partitioning
[03:01] <robertc1985> wubi makes it easier
[03:01] <todd> I am trying to access some flash content, which one should I pick, to be sure my cam will work?
[03:02] <WebcamWonder> !flash | todd
[03:02] <green_> aplay -l gives me $card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
[03:02] <lmao> i cant seem to get skype to work while ive got a media file open in the background, a media file in a browser window open or a stream open. how do i fix this?
[03:02] <ari_stress> happy valentine's day!! :)
[03:02] <chetnick> which command to use to check if certain kernel module is enabled?
[03:02] <green_> i tried aplay -D with both "STAC92xx" and "STAC92xx Analog"
[03:03] <WebcamWonder> green_: get the cardname from, asoundconf list
[03:03] <WebcamWonder> chetnick: lsmod
[03:04] <chu_> Where do all my programs install (using synaptic), and if I was to create a separate partition for it, would that mean the same programs were installed across any OS that used that partition? Or is it slightly more complicated? :)
[03:04] <WebcamWonder> lmao: Not possible without PA. Skype uses Alsa by default. And you need your soundcard to support hardware mixing, or dmix for software mixing
[03:04] <lmao> WebcamWonder, how do you do that
[03:04] <green_> asounfconf list returned $ Names of available sound cards : Intel
[03:04] <lmao> WebcamWonder, what is PA?
[03:05] <lmao> oh pulse?
[03:05] <WebcamWonder> chu_: Slightly more complicated. Most installs bring in files to /lib, /bin, etc. I think what you are more thinking about is a separate home
[03:05] <WebcamWonder> !home | chu_
[03:05] <WebcamWonder> lmao: Yeah, pulseaudio. There is a wiki out there that instructs on how to properly configure skype for PA, if you use it that is
[03:05] <exodus_ms> chu_, are you trying to keep your applications on one partition separate from you os partition? (I know some people using windoze do that sometimes)
[03:06] <lmao> where is it WebcamWonder
[03:06] <WebcamWonder> lmao: What version of Ubuntu are you on?
[03:06] <chu_> I have my /home in a separate directory, but I'm wondering, if I was to upgrade to 9.04 would I still have (for instance) Celestia installed?
[03:06] <lmao> 8.10
[03:06] <WebcamWonder> chu_: If you upgrade, yes
[03:06] <exodus_ms> yes
[03:06] <WebcamWonder> lmao: And, do you use PA? Or not?
[03:06] <lmao> no i dont use it currently
[03:06] <chu_> s/directory/partition
[03:06] <giaco> hello
[03:07] <daniel928413> hello
[03:07] <giaco> my webcam was working on the previous ubuntu release, but it's not after the update to the least version
[03:07] <WebcamWonder> lmao: Then you need dmix to enable software mixing (which I have no clue with). I would recommend to ask more people here, and google around
[03:07] <WebcamWonder> !webcam | giaco
[03:07] <daniel928413> if anyone has problems ask me
[03:07] <giaco> thank you WebcamWonder
[03:07] <exodus_ms> you think with a name like WebcamWonder you could get more help out of him :P
[03:08] <giaco> lol, it's funny
[03:08] <giaco> yes
[03:08] <giaco> where's HardDiskWonder?
[03:08] <lmao> WebcamWonder, no i dont use it currently
[03:08] <giaco> :-D
[03:08] <WebcamWonder> exodus_ms: I was waiting for that comment :P... Everytime :)
[03:08] <Alterax> It's HDW's night off.
[03:08] <chu_> But if I was to install, say xubuntu on a separate partition, would it be able to find the same Celestia install (I would be using the same /home)
[03:08] <exodus_ms> WebcamWonder, cool, good to see you are a good sport :)
[03:09] <WebcamWonder> chu_: /home contains all your personal files. So, it won't find the program installed, but if you were to install it, it would pick up your saved config
[03:09] <WebcamWonder> Alterax: I hear, he had quite a trash
[03:09] <warfie43> hi everybody!
[03:09] <WebcamWonder> exodus_ms: :)
[03:09] <Aquina> hy#
[03:10] <lmao> WebcamWonder
[03:10] <WebcamWonder> lmao: Oh, sorry. Missed your reply in the comments, hold up
[03:10] <green_> webcamwonder, asoundconf gives me a help page, and asoundconf list just returns "Intel"
[03:10] <lmao> ok
[03:10] <WebcamWonder> green_: Then try only "intel" in the aplay
[03:11] <warfie43> I come bearing gifts and seeking assistance...
[03:11] <lmao> WebcamWonder, ok
[03:11] <WebcamWonder> lmao: I can't take guarentee for this, but here is what a search turned up, http://ubuntuforums.org/showthread.php?t=32063
[03:11] <bemuse> Hi, can anyone tell me how to trigger this script
[03:11] <bemuse> http://pastebin.com/f5dce2eb0
[03:11] <WebcamWonder> warfie43: You can keep your gifts, and still take out assistance (if we can help you that is)
[03:11] <green_> i have same error
[03:11] <Aquina> I have questions regarding this (http://ati.amd.com/support/drivers/linux/linux-radeon.html) especially the FAQ. Can someone tell me wether I should use the properetary driver I automatically received via apt-get with Xubuntu or wether to choos the one from the ATI website?
[03:11] <Alterax> Warfie43 -- What's the trouble?
[03:11] <chu_> To get involved in 9.04 testing, I need to create a Launchpad account, anything else?
[03:12] <WebcamWonder> chu_: Just start testing, and see if it breaks, and then report it
[03:12] <warfie43> @Webcamwonder&Alterax :D
[03:12] <chu_> Alright
[03:12] <Alterax> Aquina, I'd stick with the standard ones from the repo, if only because updating them will be smoother in the future.
[03:12] <WebcamWonder> Aquina: The one from apt-get are supported as repos, since they have been tested by other people
[03:12] <warfie43> Ubuntu 8.10 Intrepid on Intel Soft (fake) raid :S
[03:13] <WebcamWonder> !fakeraid | warfie43
[03:13] <Alterax> Though to be honest, I'm getting good ati support with the open-source driver.
[03:13] <Aquina> thanks, Alterax! But what about ATI Cat. Control Center?
[03:13] <anteaya> I need Ragel 6.2 which is not available via synaptic for Hardy. Compiling requires g++ which I didn't have but which I installed via synaptic and also GNU Make, which gives me a lot of synaptic choices but no clear indication which is the correct package. Any thoughts?
[03:13] <Alterax> Never really used it, Aquina.
[03:13] <Alterax> Sorry I can't be of help there.
[03:13] <WebcamWonder> anteaya: install build-essential, it should bring in everything
[03:13] <Alterax> anteaya, try build-essential
[03:13] <Aquina> I see. :-)
[03:13] <nickrud> anteaya, install   build-essential ; it will get you the right packages
[03:14] <Alterax> Like WCW said. ;-)
[03:14] <bastid_raZor> Xenos; http://lifehacker.com/software/how-to/configure-custom-keyboard-shortcuts-on-ubuntu-256955.php
[03:14]  * nickrud is wols
[03:14] <anteaya> WebcamWonder: thanks I will do, I looked at build-essential earlier but the description said i didn't need the package, i will return there, thanks all
[03:14] <anteaya> Alterax, nickrud thanks
[03:14] <chu_> Umm, how do I create a backup of my current /home?
[03:14]  * WebcamWonder realized that he came here to ask a quick question few hours back. Ended up as quite the opposite
[03:15] <nickrud> WebcamWonder, be careful. That happened to me nearly 4 years ago
[03:15] <chu_> Thank you very much! :)
[03:15] <levity_island> hola #ubuntu, maybe this is the wrong place to ask, but does anyone know of a mysqldump-like tool for MS SQL Server that's available for ubuntu?
[03:15]  * Alterax nods
[03:15] <WebcamWonder> chu_: You can simply tar it (compress as a archive), to create a backup
[03:15] <WebcamWonder> nickrud: :(
[03:16] <chu_> Sweeeet, thanks very much, I'm getting excited about upgrading to 9.04 ahahah
[03:16] <ronzo> !wifi
[03:16] <prince_jammys> green_: do aplay -L to see the names of the devices. example: if you see front:CARD=Live,DEV=0 ,  then use aplay -D front ...
[03:16] <warfie43> I've been googling for days... already found those pages... downloaded and tried the Alternative install CD and the Ubiquity technique... but nothing seems to work...
[03:16] <Alterax> !food
[03:16] <prince_jammys> green_: capital L
[03:16] <ronzo> warfie43, what are you trying to do?
[03:17] <Alterax> !video chat
[03:17] <warfie43> ronzo: trying to install Ubuntu on Intel soft raid
[03:17] <green_> do i enter the whole first line of aplay -L's out put?
[03:17] <WebcamWonder> !info b43-fwcutter
[03:17] <ronzo> warfie43, you need to install the raid software for the comptuer first, let me find what package it is really fast
[03:18] <prince_jammys> green_: no, before the ':'
[03:18] <prince_jammys> green_: front:CARD=Live,DEV=0  <-- 'front'
[03:18] <tnnc> can someone help i am running ubuntu 7.10 and i am unable to access the network manager in gnome saids i dont have pression to do so
[03:18] <green_> ok
[03:18] <prince_jammys> green_: try that.
[03:18] <ronzo> warfie43, when you boot up the live disk, install raidutils, and see if that will do it / recognize the raid
[03:18] <green_> aplay: main:583: audio open error: Device or resource busy
[03:18] <ronzo> warfie43, sudo apt-get install raidutilsd
[03:18] <ronzo> warfie43, *raidutils
[03:19] <secvuln> Is there a program that will allow me to boot a usb from a live cd?
[03:19] <prince_jammys> green_: ok, that's better :)
[03:19] <green_> :)
[03:19] <prince_jammys> green_: at least it understands, ha
[03:19] <warfie43> thanks Ronzo... I'll try that...
[03:19] <bastid_raZor> secvuln; only if your BIOS supports it
[03:19] <ronzo> warfie43, np, hope that helps!  =)
[03:19] <secvuln> a pox on this outdated BIOS!
[03:20] <secvuln> I guess I'll just have to update it. :(
[03:20] <O__o> hi
[03:20] <secvuln> 0__o, you have the best name ever
[03:20] <green_> how do i find out what is using front
[03:20] <O__o> hi how come ubuntu wont automount WD passport drive
[03:20] <giaco> WebcamWonder, omg, easycam2 is in french!
[03:20] <giaco> what's the meaning? Ce driver n'est pas compatible avec Easycam, ou l'orthographe est incorrecte ... ou il n'existe pas :)
[03:21] <WebcamWonder> giaco: Is that a good thing, or a bad thing?
[03:21] <stryd_one> hi all
[03:21] <infomomo> hello :D
[03:21] <bastid_raZor> giaco; http://translation2.paralink.com/
[03:21] <Ashok_> i'm unable to change themes with emerald .7.1
[03:21] <Ashok_> *.7.2
[03:23] <tnnc> can someone help i am running ubuntu 7.10 and i am unable to access the network manager in gnome saids i dont have pression to do so
[03:23] <stryd_one> hope someone can help... in synaptic or aptitude/apt-get from the command line, my system seems to be confused about which is the newer version of any app... for example, when i tried to install sun-java6-jre, it had dependency issues because it tried to install from the hardy repo, but i have the jre from hardy-updates installed. by forcing the version to the one from hardy-updates, everything worked fine...
[03:23] <Ashok_> help with emerald not changing themes? anyone?
[03:24] <anteaya> WebcamWonder, nickrud, Alterax thanks for the direction for build-essential, it did the job, my thanks
[03:24] <WebcamWonder> anteaya: Glad to help
[03:25] <anteaya> :)
[03:25] <green_> prince_jammys, how do I force front to play my file
[03:25] <prince_jammys> green_: i have no idea
[03:25] <green_> all of the other things from aplay -L are busy too
[03:26] <kitche> green_: use a player that does not use OSS maybe?
[03:26] <illumin8> I want to enable the trash icon on my desktop, what command should i run in the alt-f2 to open the nautilus to make systemwide changes?
[03:26] <green_> kitche im not sure what u mean
[03:26] <WebcamWonder> illumin8: You can enable it from gconf-editor, or from Ubuntu Tweak, looks under apps/nautilus
[03:27] <illumin8> Thats the one thank you :)
[03:27] <Athenon_> I'm trying to change my password in phpmyadmin.  how do i do it?  It keeps letting me in with the old password, even though I've updated it everywhere I can think of, including the phpmyadmin config and the information_schema database.
[03:27] <kitche> green_: players that only use OSS can not use the sound device if something else is using it
[03:27] <ScottG489> Shit I just accidentally removed my 3 menus from my top pannel. How can I put them back?
[03:27] <WebcamWonder> ScottG489: Right click on the panel -> Add to panel, and select System Menu/Application Menu, or something along those names
[03:28] <illumin8> WebcamWonder, Thanks again that was what i needed.
[03:28] <green_> nothing on my computer can play any sounds
[03:28] <kitche> !language | ScottG489
[03:28] <green_> right now
[03:28] <prince_jammys> ~aaaaadwwergfh1~
[03:28] <n\median> guys, when i do this: sudo nmap -sU -O localhost
[03:28] <n\median> i get: 5353/udp open|filtered zeroconf
[03:28] <bastid_raZor> ScottG489; Main Menu is the option you're looking for in add panel.
[03:28] <ScottG489> WebcamWonder: ok whew, i was afraid when I ddi that it was going to be set back to its defaults
[03:28] <n\median> i want to open another port like that one..
[03:29] <n\median> how todo?
[03:29] <nicholashubbard> hey guys, just transferring files between a raid 10 and a single drive that is also connected to the raid card be causing my CPU usage to go through the roof..... seems a little strange
[03:29] <lstarnes> n\median: you need to run something that uses another port
[03:29] <WebcamWonder> ScottG489: Eveyrhting you see on the GUI is very much customizable :)
[03:29] <n\median> ok
[03:29] <n\median> ill try
[03:29] <n\median> thanks
[03:29] <lstarnes> n\median: ports aren't listed as open unless something is listening for a connection on that port and the firewall isn't blocking it
[03:30] <ScottG489> WebcamWonder: Well thats the problem, I had it really customised and i was afraid it was just going to add the default pannel back in
[03:30] <steelcityjim> can anyone assist in setting up permissions for samba file share
[03:30] <n\median> hmm
[03:30] <lmao> how do i undo recent changes i made to two configuration files?
[03:30] <steelcityjim> can see the linux device on my windows network but its not allowing me to move files to it
[03:30] <steelcityjim> says im not authorized
[03:30] <n\median> well lstarnes
[03:31] <WebcamWonder> lmao: Did you save a backup of those config files? Or, did you use gedit to edit the files?
[03:31] <lmao> WebcamWonder, i used gedit
[03:31] <n\median> i want to add teamspeak2 to a port ex 8767
[03:31] <n\median> i did: iptables -I INPUT -j ACCEPT -p udp --dport 8767
[03:31] <n\median> is that correct?
[03:31] <WebcamWonder> lmao: gedit makes an automatic backup of all edited files. Just goto the directory you edited the file from, and you should see a file name, originalfilename~, that is your backup
[03:32] <lstarnes> n\median: you don't need to do that.  All ports are allowed to be used by default
[03:32] <n\median> hmm
[03:32] <lstarnes> n\median: all you need to do is start something that uses that port
[03:32] <WebcamWonder> lmao: Move the original file to somehting like, filename.doesntwork, and move the backup to the real filename
[03:32] <steelcityjim> anyone help with configraton of samba share
[03:32] <n\median> i did start teamspeak
[03:32] <smileybri2> I love my laptop since putting Ubuntu (Intrepid) on it, but it does not play streaming video properly. If I visit a site like msnbc.com the deo starts and plays most of the way through, but then the stream stops and once the player catches up to the download it stops and plays no more. This is a consistent and persistent error that does not occur in my Windows Virtual Machine on the same computer. Can anyone point me to a solu
[03:32] <n\median> and the port still missing in that report
[03:32] <lstarnes> n\median: did you tell it to use that port?
[03:32] <n\median> yes
[03:32] <n\median> its that port by default
[03:32] <illumin8> Could anyone recommend a high quality remote support application that would allow me to to connect to windows systems (I used teamviewer when on windows, but wine doesnt work well with file transfer if needed)
[03:32] <lstarnes> n\median: you might need to manually scan it with nmap -p 8767
[03:33] <lmao> WebcamWonder, k thansk
[03:33] <lmao> thanks
[03:33] <lstarnes> n\median: er, nmap -p 8767 localhost
[03:33] <WebcamWonder> illumin8: vnc?
[03:33] <illumin8> vnc?
[03:33] <WebcamWonder> !vnc | illumin8
[03:33] <n\median> lstarnes: 8767/tcp closed unknown
[03:33] <illumin8> Thanks yet again
[03:33] <n\median> :\
[03:35] <n\median> how do i see running process
[03:35] <steelcityjim> samba file share setup anyone?
[03:35] <steelcityjim> need some help
[03:35] <WebcamWonder> steelcityjim: Did you read the standard documentation provided by ubuntu?
[03:35] <tnnc> can someone help i am running ubuntu 7.10 and i am unable to access the network manager in gnome saids i dont have pression to do so
[03:36] <steelcityjim> yes webcam its not helping
[03:36] <WebcamWonder> steelcityjim: Did you allow anonymous writes in your smb.conf?
[03:36] <steelcityjim> well i did not configure at the command line
[03:36] <steelcityjim> i got the desktop gui
[03:37] <steelcityjim> do I still need to command line stuff to configure?
[03:37] <lstarnes> n\median: ps aux
[03:37] <WebcamWonder> steelcityjim: I don't really know. I haven't worked much with samba. BUt the smb.conf does have an option of globally disabling anony. writes
[03:37] <stryd_one> hope someone can help... in synaptic or aptitude/apt-get from the command line, my system seems to be confused about which is the newer version of any app... for example, when i tried to install sun-java6-jdk, it had dependency issues because it tried to install from the hardy repo, but i have the jre from hardy-updates installed. by forcing the version to the one from hardy-updates, everything worked fine... Why would it not select th
[03:37] <stryd_one> e newer version?
[03:38] <WebcamWonder> stryd_one: It is expected, since the jre was installed from a higher version, it might be that the dependency for sun-java6-jdk was actually lower than the current installed package
[03:39] <n\median> lstarnes: this is weird! i started the teamspeak with one user. then i switched to admin, and did that cmd.. but the process isnt there
[03:39] <lstarnes> n\median: it likely died
[03:39] <lmao> i cant find a file in the trash i just deleted
[03:40] <stryd_one> WebcamWonder, thank for helping... that's the thing though... the latest version of the jdk, installed fine - but i had to force it to the latest version.... when i let the system select it without forcing, it chose the older version
[03:40] <lstarnes> lmao: how did you delete it?
[03:40] <lmao> rm
[03:40] <lstarnes> lmao: rm completely skips trash
[03:40] <Hemebond> erg. Tribal Trouble has borked my audio. I'm getting the ol' rapid noise loop. I can stop the Alsa service to stop all sound, but it's still there when I restart the service. Anything I can do without restarting my session?
[03:40] <WebcamWonder> stryd_one: I do believe there is a list of preffered source of packages, where the hardy proposed is at a lower priority than regular. I am not sure though
[03:40] <n\median> teamspeak2-server_startscript status
[03:40] <n\median> the server seems to be running
[03:41] <Aquina> tnnc, try entering "sudo network-admin"
[03:41] <lmao> how do i get a new /etc/esound/esd.conf file anyone?
[03:41] <Snakedoc> tritium, ya here?
[03:41] <stryd_one> aha, that would explain it, i'll look into that thanks WebcamWonder :)
[03:41] <lstarnes> lmao: try reinstalling esd
[03:41] <ZI> asu
[03:41] <ZI> ady
[03:41] <Aquina> stryd_one have you checked the synaptic options?
[03:41] <green_> i removed pulseaudio, and now aplay says  set_params:954: Sample format non available
[03:42] <jmk2> off topic, whats a good site for "rainbow tables"?
[03:42] <lmao> lstarnes, how do you do that?
[03:42] <ZI> hello km cp
[03:42] <dee25> i have a intel 82865G and a E153fp dell montior
[03:42] <lstarnes> lmao: sudo aptitude reinstall esound
[03:42] <dee25> i cant seem to change the resolution im stuck between
[03:42] <dee25> 800x600 and 600x480
[03:43] <stryd_one> Aquina, yeh it's set to "always prefer the highest"
[03:45] <Aquina> stryd_one and synaptic installs 8.04 packets though you're running 7.10 - did I get it right?
[03:45] <stryd_one> Aquina, no i'm running 8.04, and it installs 8.04 packages, but it doesn't select the newest version available, i have to force it
[03:46] <seriouslycgi> i made a boo boo and changed the ownership of the mount point of a directory (its called /store on /dev/hdb2) who is supposed to own the mount point?
[03:46] <bastid_raZor> seriouslycgi; root
[03:46] <raz_-> Anyone knows why the nvidia driver install isn't persistant after reboots on usb-flash-disks running the live image?
[03:46] <seriouslycgi> ok thanks
[03:47] <lstarnes> seriouslycgi: user root, group root to be exact
[03:47] <seriouslycgi> yup thank you. ill change both
[03:48] <Aquina> force is normally only required if there are several versions available and you want to choose a different one. I'd recommend you to use apt-get and reinstall that thing. Also try to cleanup config.
[03:49] <Aquina> There must be somethin' messed up severely
[03:49] <raz_-> Aquina, was this addressed to me?
[03:50] <GeffIsLegend> hey everyone , i need to figure out how to get my world of warcraft sounds working :-/
[03:50] <danbhfive_jaunty> GeffIsLegend: did you check the appdb?
[03:50] <Aquina> nos, to stryd_one
[03:50] <raz_-> Aquina, kay.
[03:51] <GeffIsLegend> whats appdb?
[03:51] <warfie43> RAZ_ since nobody more knowledgable than me has answered I'll offer my guess.... if you're booting the live image, no matter if it's on a usb stick, nothing is persistant
[03:51] <danbhfive_jaunty> !appdb | GeffIsLegend
[03:52] <tnnc> aquina i get that liboobs warning and it doesnt come up
[03:52] <rdw200169> GeffIsLegend, have you checked to make sure sound works in wineconfig first?
[03:53] <raz_-> warfie43, that isn't exactly true. I have installed flash 9 and it is persistant despite reboots.
[03:53] <stryd_one> Aquina, i did use apt-get, same results :( I agree, something ain't right, but i've no idea where to look to try and fix it. I haven't done any kind of weird config to aptitude/apt-get/synaptic aside from adding new repos
[03:53] <Ciolivera> http://www.metroflog.com/ci0livera
[03:53]  * warfie43 pulls his head in....
[03:53] <GeffIsLegend> im pretty sure, i have all the audio settings enabled
[03:53] <rdw200169> GeffIsLegend, it's: winecfg on the cmd line
[03:53] <rdw200169> GeffIsLegend, you have to make sure the sound test works there *first*
[03:54] <rdw200169> GeffIsLegend, b/c if wine can't output sound, WoW never will ;)
[03:54] <GeffIsLegend> rdw200169:  yeah i just tested sound it worked, should i enable sound emulation?
[03:54] <daniel928413> hi
[03:54] <daniel928413> bye
[03:55] <rdw200169> GeffIsLegend, no, i just have Full/44100/16 for the option
[03:55] <seriouslycgi> lstarnes, i changed ownership and group do i need to reboot for changes cos its not letting me in anymore :s
[03:55] <seriouslycgi> oh i need to change mode as well dont i?
[03:55] <lstarnes> seriouslycgi: you shouldn't need to reboot
[03:55] <rdw200169> GeffIsLegend, are you using the alsa driver?
[03:55] <lstarnes> seriouslycgi: what is the mode set to?
[03:56] <GeffIsLegend> rdw200169:  thats what i got , and i got everything in the check boxes checked in also
[03:56] <seriouslycgi> lstarnes, drwxr-xr-x
[03:56] <GeffIsLegend> rdw200169: pretty sure all of them are enabled, is this bad? lol
[03:56] <lstarnes> seriouslycgi: that looks correct
[03:56] <tnnc> liboobs
[03:56] <rdw200169> GeffIsLegend, just use alsa
[03:57] <seriouslycgi> im using thunar but it wont let me in the mount point/directory
[03:57] <seriouslycgi> do i need to re-mount it
[03:57] <lstarnes> seriouslycgi: you might need to
[03:57] <rdw200169> GeffIsLegend, wine is a bastard about alsa, it will only use the 'default'
[03:58] <GeffIsLegend> oo , hah, should i reset WoW and try it?
[03:58] <rdw200169> GeffIsLegend, sure, wouldn't hurt
[03:58] <GeffIsLegend> rdw200169: kk1min
[03:59] <jony_kalavera> hi i'm having problems with a canon printer ip1600. iget an error which says child process aborted
[03:59] <Dracie_> just use alsa-oss if your having issues with sound in wine
[03:59] <jony_kalavera> what could be the problem
[04:00] <jony_kalavera> http://paste.ubuntu.com/117914/
[04:00] <GeffIsLegend> rdw200169: didnt work :-/
[04:00] <baz> whats a good way to restart *conky* to see my config changes?
[04:02] <ziroday> baz: well how do you normally start conky?
[04:02] <kidcrash> y'all got a new user coming your way, just sold a computer and she was excited about the os
[04:03] <ScottG489> As I see it, there are generally 2 ways I open a file, to either view it or to edit it. Its there any program I can use to streamline being able to do this to a file? Say I hold down shift when I double click on a file, it will open the editor i choose instead of a program to view it with. Anyone know of a program like this or have a comment on the idea?
[04:03] <baz> ziroday, by typing 'conky' in terminal
[04:03] <ziroday> baz: okay. try kill it with killall conky
[04:04] <rdw200169> GeffIsLegend, i don't know then... have you check the config.wtf file to make sure it's alright (for WoW)?
[04:04] <mcstinky> good morning everyone, can anyone tell me why I have to create two profiles in my vnc4server? and upon rebooting, I have to always start the second account, or it says connection dropped, I am on LAN
[04:04] <ziroday> ScottG489: AFAIK there is no utility to do this, can you give an example on one of these files?
[04:04] <baz> ziroday, thats good, thanks
[04:04] <jony_kalavera> does anyone here speaks german?
[04:04] <redvamp128> mcstinky:  I have heard of people adding it to a startup script
[04:04] <GeffIsLegend> ill have to double check, where does the Config.WTF go exactly? which directory
[04:04] <redvamp128> #de | jony_kalavera
[04:04] <ziroday> baz: and then restart it with conky :). Also if conky is running in the terminal you can use ctrl+c to kill it
[04:05] <redvamp128> #du | jony_kalavera
[04:05] <ziroday> !de | jony_kalavera
[04:05] <Aquina> jarco, ich jony_kalavera
[04:05] <mcstinky> redvamp128, thanks! to the google-macine! =D
[04:05] <baz> ziroday, what about making it independent of the terminal
[04:05] <stryd_one> Anyone who is searching for this later might like to know: I found the culprit: /etc/apt/preferences has some pinnings set. I removed them and it's fixed
[04:05] <ziroday> baz: do conky & disown
[04:06] <Aquina> jony_kalavera brauchst Du Hilfe?
[04:06] <jony_kalavera> i dont speak german but i think this forum could be simmilar to my problem. http://forum.ubuntuusers.de/topic/canon-ip2500/?highlight=open#post-1189645
[04:06] <isaac_> For an older computer that will not boot from USB; is there a boot disk that will let you boot from USB?
[04:06] <stryd_one> thanks all, 'til next time! :)
[04:06] <GeffIsLegend> rdw200169: ill have to double check, where does the Config.WTF go exactly? which directory
[04:06] <rdw200169> GeffIsLegend, it should be in the WTF directory of where WoW is installed
[04:06] <ScottG489> ziroday: I can think of a ton of examples. Say you have an image file, you could open gimp to edit it or image viewer to edit it. Thats probably my most common problem but I know I have run into other occasions where i have frequently wanted to edit a file or view it almost an equal ammount
[04:06] <axor1337> /msg NickServ VERIFY REGISTER axor1337 aavifeqeufxh
[04:06] <isaac_> You know how an old Windows 98 boots from floppy, then you point it at the cd drive.  Is there a boot cd that you can then use to boot from USB?
[04:07] <ziroday> ScottG489: sure, well I don't know any way to do that, you might want to put your idea up on brainstorm.ubuntu.com
[04:07] <bemuse> In future it would be better to do those type of things in the status window axor1337
[04:07] <ziroday> axor1337: you will want to change your password
[04:07] <jony_kalavera> sorry wrong one http://forum.ubuntuusers.de/topic/canon-ip-1500-unter-ubuntu-8.10-32-bit/
[04:07] <Aquina> jony_kalavera existiert das Verzeichnis und hast Du die Rechte dafür?
[04:07] <JabberWalkie> axor1337: not that smartest thing to do
[04:07] <ScottG489> ziroday: Or for a lot of programming files. The IDE I use takes a while to open, say I just want to look at it with a smaller program that formatted it correctly (not just a text viewer)
[04:07] <ziroday> isaac_: you should be able to configure that through the bios
[04:08] <isaac_> ziroday some old computers' BIOS won't boot from USB.
[04:08] <ziroday> ScottG489: yep, it makes sense to me. When you're done submitting your idea ping me and I'll approve it for you
[04:08] <ScottG489> ziroday: Thats something i seriously would like to program myself if i knew how to right now
[04:08] <jony_kalavera> Aquina: i dont speak german i was just asking for anyone who could explain this http://forum.ubuntuusers.de/topic/canon-ip-1500-unter-ubuntu-8.10-32-bit/
[04:08] <ScottG489> ziroday: What does approving it do?
[04:09] <DarthSomething> hi people
[04:09] <ziroday> ScottG489: well when you submit an idea it has to be approved by moderators, to make sure it makes sense etc before people can vote on it
[04:09] <DarthSomething> i've a trouble with my intrepid
[04:10] <ScottG489> oh ok
[04:10] <redvamp128> isaac_:  depending on what the os is on the computer I have heard of the following-- installing linux on a usb stick-- then adding wingrub to point to the usb (which would still use the mbr) if windows is installed.
[04:10] <ziroday> darthanubis: whats not working?
[04:10] <ziroday> darthanubis: whoops, sorry
[04:10] <NoSoyKaseO> habemus...
[04:10] <DarthSomething> ufw or firestarter leave open the icmp and i cannot stay stealth
[04:11] <isaac_> redvamp128 Ouch......... sounds like it could seriously mess up the resident OS.  Do you know anyone who could make a boot cd like that?
[04:11] <DarthSomething> i cannot pass the security test of shieldsup
[04:12] <redvamp128> isaac_:  it is not a big mess let me give you the page to the wingrub-- it is a line added to the boot.ini to point to the wingrub then to boot the linux without major changes.
[04:12] <ziroday> DarthSomething: you are fine, don't worry about it.
[04:12] <illumin8> Appologies if this is not the right question for this area, but i have checked other channels and noone seems to know. I downloaded Savage XR and tried to install it from the terminal but get a error that i am lacking permissions, how can i give myself permissions on it (i have tried right clicking to change them)
[04:12] <DarthSomething> and i've not found an ultimate guide to set up my firewall
[04:12] <redvamp128> isaac_:  WinGrub and Ubuntu <http://users.bigpond.net.au/hermanzone/p9.html>
[04:12] <DarthSomething> th ziroday
[04:12] <fred__> hi
[04:12] <DarthSomething> tx
[04:12] <ziroday> illumin8: do chmod ugo+r /path/to/executable
[04:12] <illumin8> ziroday, Thank you
[04:13] <Aquina> Sorry jony_kalavera but I think I cannot help you with that. You'd specify your problem a bit more. Generally installing all packets is necessary.
[04:13] <DarthSomething> but i've not undestood if to use ufw is the cause to not be stealth
[04:13] <fred__> who knows a good and easy wfi captif portal
[04:13] <ziroday> DarthSomething: that test was designed for windows computers, not linux futhermore its somewhat outdated
[04:14] <rdw200169> fred__, coovachilli, coova.org or coova.com
[04:14] <DarthSomething> maybe also my router that replies to icmp, but using firestarter i get some alarms
[04:14] <DarthSomething> this things means that i'm not stealth
[04:14] <DarthSomething> if someone ping my pc
[04:15] <aboys> where is mysql_config file ? at apt-get install mysql
[04:15] <rdw200169> fred__, it's an amazing upgrade to the now ancient chillispot captive portal.  complete with DHCP redirection/relay, etc...
[04:15] <ziroday> DarthSomething: do not worry. You are fine.
[04:15] <fred__> thanks
[04:15] <illumin8> ziroday, bash: ./xr_setup-1.0b3-cl_lin_prod.bin: Permission denied after the command given
[04:15] <simplenewb> I'm using sshfs to mount a drive from another computer on my home network, question is how can I write to the drive? Whenever I use sshfs to mount a drive it's read only and I don't know how to make it writable.
[04:15] <riegersn> mplayer starts caching in firefox for videos, then stops and status in player window says 'Stopped' video never plays. Any Idea?
[04:16] <ziroday> illumin8: what does ls -l ./xr* output?
[04:16] <DarthSomething> i'm a little paranoid, i know... but my real problem is to not understand how my firewall works
[04:17] <rdw200169> DarthSomething, if you really want to learn about how linux does firewalling, start reading about ipTables
[04:17] <rdw200169> DarthSomething, smoothwall, ufw, firestarter (etc... etc...) all use iptables
[04:17] <ziroday> illumin8: according to that you didn't do chmod ugo+x ./xr*
[04:17] <DarthSomething> ufw overwrite iptables rules?
[04:17] <ziroday> illumin8: try sudo chmod ugo+x ./xr*
[04:18] <DarthSomething> if i use ufw and firestarter i make something of bad?
[04:18] <ziroday> illumin8: it depends on who owns the file, run it as sudo for now
[04:18] <rdw200169> DarthSomething, no, it's not like that; iptables is always in charge... ufw, in the backround, runs iptables to input the firewall information
[04:18] <rdw200169> DarthSomething, as does firestarter, etc...
[04:18] <rdw200169> DarthSomething, i don't understand your question
[04:18] <step> hey all, anyone tell me why when i make a change to file sharing settings (and the sharing is working) the settings aren't being reflected in /etc/samba/smb.conf
[04:19] <DarthSomething> ok, they are likes gui for iptables
[04:19] <ziroday> illumin8: and then when doing ls -l ./xr* it should read rwxrwxrwx
[04:19] <illumin8> ziroday, ok thanks ill try that, be right back
[04:19] <ziroday> step: I believe gnome puts the settings elsewhere, but don't know where sorry :(
[04:19] <arghh2d2> frontend
[04:19] <DarthSomething> in this way, i yet can use iptables rules
[04:19] <rdw200169> DarthSomething, yes
[04:20] <step> ziroday, that's my theory.  but google isn't helping me out :(
[04:20] <DarthSomething> and i must write/copy a "not icmp" iptables rule
[04:20] <rdw200169> DarthSomething, if you want more rules for firestarter, for example, you have to add stuff to /etc/firestarter/user-pre or user-post
[04:20] <memphis_> hello?
[04:20] <ziroday> step: what are you trying to do?
[04:20] <rdw200169> DarthSomething, and if you want to take some away, you have to edit /etc/firestarter/firestarter.sh
[04:20] <ziroday> memphis_: Hi! How can we help you?
[04:20] <illumin8> ziroday, after trying the sudo mehtod i do get -rwxrwxrwx 1  now. thank you
[04:20] <DarthSomething> tx rdw200169
[04:20] <memphis_> just checking out the digs, I am in Utah
[04:21] <step> ziro: mostly wanted to kill the "printers" share, but i'd like to tweak the browseable setting too.
[04:21] <ziroday> illumin8: awesome! The file executes now?
[04:21] <rdw200169> DarthSomething, keep in mind that iptables is passive, as far as config loading is concerned
[04:21] <maxime> what about the linux file system :P
[04:21] <ziroday> step: can you pastebin your /etc/samba/smb.conf? I'm not very good with samba but two brains are better then one
[04:21] <memphis_> ziroday: what the topic tonight?
[04:21] <illumin8> ziroday, that it does, quite fast actually :)
[04:21] <rdw200169> DarthSomething, the last firewall frontend to run is the one who owns the firewall;  most firewall apps will flush the old firewall out, and add theirs
[04:21] <illumin8> ziroday, thank you again, i should post this on thier forums?
[04:22] <BZOTKHUIDT> hello
[04:22] <ziroday> memphis_: This is support, something not working you can ask us. To chat you can do so in #ubuntu-offtopic :)
[04:22] <ziroday> illumin8: you could, but the reason its not like that automatically is a security setting
[04:22] <step> ziro:  i'm ok tinkering with the file, i just can't find where gnome's making the changes.  it just isn't using the ones in /etc/
[04:22] <ziroday> illumin8: I believe, I could be wrong
[04:22] <memphis_> well I wanted to ask I have a site www.videogamefixer.com and I wanted to know about getting a Ubuntu distro on a xbox 360
[04:22] <ziroday> step: you could ask in #gnome on irc.gimp.net
[04:23] <richerVE> hi, how can i pair a device with bluez 4.x ??? anyone?
[04:23] <ziroday> irc://irc.gimp.org/#gimp
[04:23] <DarthSomething> finally if i use something likes "sudo iptables -something" i bypass ufw and firestarter?
[04:23] <step> ziro:  thanks, i will.
[04:23] <spasticteapot> memphis_: Not going to be easy. The Xbox 360 uses a version of the PowerPC architechture far more advanced than that ever supported by Ubuntu.
[04:23] <ziroday> woops sorry
[04:23] <illumin8> ziroday, to combine the two commands you sent me they would appear as "sudo chmod ugo+rx /path/to/file" correct?
[04:23] <DarthSomething> or firestarter can overwrite my new rule?
[04:24] <memphis_> how do we whisper (sorry a little new to linux and IRC)
[04:24] <ziroday> illumin8: err sudo chmod ugo+x /path/to/file should do.
[04:24] <rdw200169> DarthSomething, well, unless you flush the firewall, it just adds the new rule to the end of the chain, if you use the -A rule for example
[04:24] <spasticteapot> memphis_: If there IS such a distro, it's going to be oriented towards people wanting to use 360s for distributed computing (such as a render farm), not for, say, media playback.
[04:24] <ziroday> memphis_: you mean message people?
[04:24] <rdw200169> DarthSomething, you can use -I to insert, but that's tricky to use
[04:24] <memphis_> yeah
[04:24] <FoxBlitzz> memphis_ /msg user
[04:24] <rdw200169> DarthSomething, its easier to just modify the user-pre/user-post files
[04:25] <rdw200169> DarthSomething, or edit firewall.sh
[04:25] <FoxBlitzz> Or /query in some clients
[04:25] <n\median> lstarnes: thanks
[04:25] <n\median> i managed to put it working
[04:25] <Kolie_> I made a dvd, and the colors are fine on my windows computer, but under vlc and xine the colors are wrong. background are purple, people are greyed out, its just weird.
[04:25] <spasticteapot> Does anyone here know how to get Ubuntu to do something with my M-Audio Audiophile? I did the firmware fix as described on the forums, which allowed ALSA to recognize it as existing, but I can't get anything to play through it.
[04:25] <DarthSomething> rdw200169, what's the simplest way? edit user-pre?
[04:26] <spasticteapot> Kolie_: I have a similar problem, except for me the color depth has been reduced entirely to nil, the contrast is gone, and the sound is muted. :)
[04:26] <Kolie_> I can hear fine, I had to switch to totem-xine
[04:26] <chu_> hey is it possible to "embed" a terminal on the desktop?
[04:26] <Kolie_> or use vlc
[04:26] <Kolie_> But color is wrong in both
[04:27] <ziroday> chu_: I believe so with xwinwrap
[04:27] <rdw200169> DarthSomething, firestarter is pretty smart about *where* it adds the pre and post rules. consult firestarter.sh on where exactly it does this
[04:27] <rdw200169> DarthSomething, it's a relatively simple script to read ;)
[04:27] <jony_kalavera> Aquina: nevermind i found the solution sudo apt-get install libcnbj-2.6 bjfilter-2.6 pstocanonbj
[04:27] <DarthSomething> ok, thanks
[04:27] <jony_kalavera> Aquina: thanx any way
[04:28] <DarthSomething> you're very kind rdw200169
[04:29] <rdw200169> DarthSomething, I try to help, i'm sorry if i sounded rude
[04:29] <DarthSomething> noth, it sounds good ;-)
[04:29] <DarthSomething> tx
[04:31] <owen1> my FF beeps when i scoll with ctrl+down and hit the bottom. can I silent it?
[04:31] <redvamp128> chu_: I did find one guide but it makes a terminal the desktop background- HOWTO: Terminal for desktop background. - Page 10 - Ubuntu Forums <http://ubuntuforums.org/showthread.php?t=36811&amp;page=10>
[04:31] <ziroday> owen1: you can remove the beep all together from all apps with sudo rmmod pcspkr
[04:32] <rdw200169> ziroday, that is one classy fix!  (why didn't i do that?  i just removed the speaker!)
[04:32] <owen1> ziroday: interesting, but i would like only from FF.
[04:32] <ziroday> rdw200169: haha, you can add it do /etc/modprobe.d/blacklist to have it not loaded at startup
[04:33] <evertonllins> ]
[04:33] <raz_-> Anyone knows why the nvidia driver install isn't persistant after reboots on usb-flash-disks running the live image? Flash 9 is staying, despite reboots. Nvidia's drivers aren't :/
[04:33] <redvamp128> ziroday:  why not just goto system- preferences -- sound -- then system beep -- uncheck?
[04:33] <ziroday> owen1: hmm for me doing ctrl+down changes tab
[04:33] <tritium> raz_-: why do you say that?
[04:33] <owen1> ziroday: i meant page-down..sorry
[04:33] <_Thorn_> Is ubuntu 7.04 too old to "upgrade" ?
[04:33] <spasticteapot> Does anyone know why sound isn't playing through my USB soundcard?
[04:34] <DarthSomething> see you later!
[04:34] <ziroday> owen1: page down doesn't do it either
[04:34] <raz_-> tritium, because it is what I am currently experiencing?
[04:34] <tritium> raz_-: it's not true in general.  Which driver package did you intsall?
[04:34] <owen1> ziroday: it doen't beep or doesn't scroll?
[04:34] <tritium> install, even
[04:34] <ziroday> owen1: doesn't scroll
[04:34] <owen1> ziroday: weird. nothing happend?
[04:35] <ziroday> owen1: ctrl+pg down changes tabs
[04:35] <raz_-> tritium, the last one, using the ubuntu hardware driver for proprietary drivers menu.. version 180, if I remember correctly.
[04:35] <owen1> ziroday: i know. i am talking about scrolling.
[04:35] <ziroday> owen1: don't know sorry
[04:35] <owen1> ziroday: np
[04:37] <tritium> raz_-: probably nvidia-glx-177, in that case.  -180 doesn't show up in the menu.  What does /etc/X11/xorg.conf list as the driver when you believe the driver doesn't persist?
[04:38] <chu_> I notice sometimes when I close programs, the power-manager crashes (8.10), do I report this as a bug?
[04:38] <chu_> It could be resetting I guess.
[04:39] <raz_-> tritium, hold on, booting.
[04:39] <rakhman> hai
[04:39] <redvamp128> !bugs | chu_
[04:45] <w3wsrmn> :3
[04:47] <evilGUI> any idea why I get -bash: cd: lighttpd: Permission denied
[04:47] <evilGUI> when I try to cd /var/log/lighttpd/
[04:48] <martin_> -,d
[04:48] <ziroday> evilGUI: because its a file not a folder?
[04:48] <martin_> nano try
[04:48] <evilGUI> I tried nano it says it's a folder.
[04:49] <evilGUI> same goes for the mysql log directory
[04:49] <ziroday> evilGUI: can you pastebin ls -la /var/log/
[04:49] <dee25> how u install 915 resolution i have it in my home folder
[04:49] <Stargazer> Is there a way to take a screenshot without shooting the pointer ?
[04:49] <tritium> dee25: that's typically not needed any more
[04:49] <ziroday> Stargazer: I believe ksnapshot can do that
[04:49] <raz_-> tritium, I perfermed an update earlier, as such, I have access to versions 173/177/180 in the "hardware drivers" menu.
[04:49] <Halcyon> hmm
[04:50] <kitche> evilGUI: most likely it's because you need root powers to access those directories so use sudo to access them
[04:50] <dee25> is not?
[04:50] <dee25> im trying to change my resolution
[04:50] <mcstinky> Stargazer, are you using the 'take screenshot' tool? I believe that has an option to not show mouse on picture
[04:50] <Stargazer> Ziroday, is there a native way ? (without using another probram)
[04:50] <evilGUI> http://pastebin.com/m2c3410b2
[04:50] <tritium> raz_-: its inclusion in the menu evidently depends on what hardware is auto-detected.  For many, 180 doesn't show up.
[04:50] <evilGUI> kitche: How would I do that sudo cd?
[04:50] <Stargazer> Mcstinky: just the PrtScrn button. :)
[04:50] <ziroday> Stargazer: I always use ksnapshot as I find it more powerful, sorry
[04:50] <raz_-> tritium, 180 is the "recommended" one.. once I click on "activate", it tells me I need to restart the computer to activate the driver. I do so. It doesn't.
[04:50] <kitche> evilGUI: yes but I would use sudo -i really
[04:51] <_2> what is dir anyway ?    Direct Rendering Infrastructure ?
[04:51] <martin_> eç
[04:51] <tritium> raz_-: what does "apt-cache policy nvidia-glx-180" reveal?  Is it installed?  Does your /etc/X11/xorg.conf list "nvidia" as the driver?
[04:51] <martin_> bad comand
[04:51] <bemuse> dir = directory?
[04:51] <raz_-> tritium, checking..
[04:51] <ziroday> evilGUI: right, you don't have read permission on that directory
[04:51] <_2> bemuse typo  dri
[04:52] <bemuse> oh i see :P
[04:52] <evilGUI> ziroday: Is it meant to be that way?
[04:52] <ziroday> evilGUI: well its how you set it up. You can change it.
[04:53] <_2> so if i'm not using 3d nor wanting 3d  is there any reason to work on getting dri working ?
[04:53] <raz_-> tritium, "...nvidia-glx-180" indicates: installed (same as candidate): 180.11-0ubuntu1-intrepid1 ... opening xorg.conf.
[04:53] <tritium> raz_-: good
[04:53] <evilGUI> ziroday: How so?
[04:53] <ziroday> evilGUI: sudo chmod ugo+r /var/log/lighttpd
[04:54] <_2> 755
[04:54] <evilGUI> ziroday: You see my problem was this VPS had root enabled by default for some odd reason and I installed a few things as root =(
[04:54] <evilGUI> ziroday: Should I do a reinstall?
[04:55] <raz_-> tritium, yes.. under 'Section "Device"', there is 'Driver "nvidia"'.
[04:55] <ziroday> evilGUI: thats fine, then just ssh in as root
[04:55] <tritium> raz_-: Sounds like it's installed and being used.
[04:55] <raz_-> tritium, keep in mind that I just re-did the 'activate' thing.
[04:55] <martin_> r
[04:56] <evilGUI> ziroday: But that fact that I setup lighthttpd, mysql and PHP as root is that going to come back to kill me?
[04:56] <_2> evilGUI yes absolutely,  reinstalls three or four times a weak until you get good at it,  then never reinstall again.
[04:56] <raz_-> tritium, if I open the nvidia util, it tells me: "You do not appear to be using the NVidia X driver. Please edit your X configuration fiile (just run nvidia-xconfig as root), and restart the X server".
[04:57] <tritium> raz_-: please check your /var/log/Xorg.0.log for some clues
[04:57] <_2> so about dri ?
[04:58] <_2> advice welcome,   is there any reason to try to get dri working if i'm not the least interested in 3d ?
[04:58] <raz_-> tritium, I just did a "sudo nvidia-xconfig" and then ctrl+alt+backspace to restart X.. Seems that it is now working. As a side effect, the mouse pointer disappeared. I'll try restarting the whole thing to see how persistant it is.
[04:58] <pneves> list
[04:59] <redvamp128> raz_-:  usb mouse? or standard one?
[04:59] <raz_-> redvamp128, laptop touchpad.
[05:00] <_2> ps2 probably raz_-
[05:00] <prince_jammys> _2: nah, grab a beer. dealing with that sounds like potential torture.
[05:00] <redvamp128> raz_-:  I found something the other night while I googled something else about restarting usb from prompt but I would not know where to begin with the touchpad
[05:01] <histo> redvamp128: controlled by X
[05:01] <_2> prince_jammys can i skip the beer too.  that sounds like torture too
[05:01] <histo> redvamp128: synaptics drivers. You could check lsmod but
[05:01] <prince_jammys> _2: ok, a glass of milk
[05:01] <histo> who knows with those things.
[05:01] <_2> lactose yuch
[05:01]  * _2 looks for beer
[05:02] <mcstinky> how about sugar water?!
[05:02]  * histo doesn't have browser right now to look. Installing 8.10 on my main box.
[05:02] <qcjn> hi, somebody suggested to add this to grub "title= Puppy Linux 4   root	=(hd0,1)  kernel=/pup4/vmlinuz ro quiet   initrd= /pup4/initrd.gz
[05:02] <qcjn> so i can choose puppy at start up, beside ubuntu and Xp
[05:02] <_2> seriously   would there be any real use for  dri  other than 3d effects
[05:02] <_2> ?
[05:03] <qcjn> but i wan,t to be sure before making changes to grub
[05:04] <redvamp128> qcjn:  let me check mine-- I have puppy installed
[05:04] <qcjn> redvamp128: thanks
[05:05] <redvamp128> qcjn:  this is what I have for mine-- you may want to add it to the end as an added cushion
[05:05] <redvamp128> qcjn:  title Puppy Linux 412 full install
[05:05] <redvamp128> root (hd1,0)
[05:05] <redvamp128> kernel /boot/vmlinuz root=/dev/sdb1 pmedia=atahd nosmp
[05:06] <qcjn> i can see the puppy files in my root, pup_410qcjn.sfs,  pup_save-qcjn.2fs
[05:06] <aina> allow
[05:06] <qcjn> so it should be ok
[05:06] <redvamp128> ahh
[05:06] <aina> allow
[05:07] <chu_> I am using a custom theme, but it says "This theme will not look as intended because the required GTK+ theme engine '' is not installed" - Can I find out what theme engine this requires?
[05:07] <redvamp128> qcjn:  yes that looks right -- Mine is a full install though
[05:07] <qcjn> hum, how you did that, took a partition just for puppy ?
[05:08] <redvamp128> qcjn:  yes -- but I forgot that on my other system puppy runs in a directory--
[05:09] <qcjn> redvamp128: how come you've got 2 times root
[05:09] <likuidsilence> can someone confirm this is a bug in 8.10 when mounting NFS shares ?? I get the following mount.nfs: mount to NFS server 'rpcbind' failed: RPC Error: Program not registered
[05:09] <nickrud> chu_, in the gtkrc file for the theme, look for the engine declaration
[05:10] <redvamp128> qcjn:  let me pastebin it so you can see how it looks without the multiple lines
[05:10] <qcjn> ok
[05:10] <_2> qcjn grub accepts a root path  "(hd0,0)"  and the kernel accepts a root path "root=/dev/root"
[05:10] <redvamp128> qcjn: general pastebin - puppy - post number 1336822 <http://www.pastebin.ca/1336822>
[05:10] <histo> I keep losing consoles any way tot recover them? F1-F4 are gone just blinking cursor?
[05:11] <qcjn> ok
[05:11] <histo> After I log out they won't reset they jsut go to blinking cursor
[05:11] <redvamp128> qcjn:  though I think when 4.1.3 comes out will install that one inside a folder on that partiion.
[05:12] <histo> Its not showing anyone on the tty if I use the who command
[05:12] <fengshaun> hi everyone, how can I dim my screen? (sony laptop vgn-fj270)
[05:12] <chu_> nickrud - where do I find this file? ~/.themes/<theme>/{gtk : gtk-2.0 : metacity-1} ?
[05:12] <_2> histo init is supposed to respawn them,  but if they respown too quickly they will be disabled for x=minutes  >>> init 3 # should reset them
[05:12] <redvamp128> fengshaun:  should be a function key then another key (should be controlled by laptop bios) and not really ubuntu.
[05:12] <nickrud> chu_, it would be <themefolder>gkt-2.0/gtkrc
[05:13] <fengshaun> redvamp128: the func key doesn't work!
[05:13] <nickrud> chu_, erm, gtk-2.0/gtkrc obviously
[05:13] <_2> histo or should i say changing runlevels should reset them.
[05:13] <chu_> thanks nickrud
[05:13] <fengshaun> (it's software controlled I think)
[05:13] <chu_> Yep, found it :)
[05:13] <redvamp128> fengshaun:  hold it down then look for a key that looks like a sun then beside that one should be the dim (you have to hold both down at the same time)
[05:13] <chu_> engine "pixmap"?
[05:14] <nickrud> chu_, that's an engine,yes. the most commonly used one
[05:14] <fengshaun> redvamp128: hahaha that was noob language, but it doesn't work
[05:14] <nickrud> chu_, why your custom theme isn't finding it is another question
[05:14] <_2> histo i think the default is five respawns in 30 seconds.   but not sure.   anyway, check the /var/log/messages   for what might be causing it.
[05:14] <redvamp128> fengshaun:  what is the video card generally they have a setting for gamma which would do the same there
[05:14] <chu_> there's two
[05:14] <chu_> whoops
[05:15] <chu_> there's two #module_paths
[05:15] <fengshaun> redvamp128: it's intel
[05:15] <hanasaki> what is in server vs desktop?  what is the criteria for choosing ?
[05:15] <histo> _2: if I init a different run level how do I get back just sudo init 2 the init 5 or something?
[05:15] <qcjn> thanks, but i don't understand enough.. to play right now in grub..the line root, tells where is the root, Right ?
[05:15] <hanasaki> and what is "studio"?
[05:16] <_2> histo by default runlevels 2 through 5 are exactly alike
[05:16] <histo> _2: well how do I switch to get this fixed?
[05:16] <_2> sudo init [2,3,4,5]
[05:16] <histo> _2: nothing in /var/log/messages that seems relevant by the way
[05:16] <histo> _2: is there a command to see the current runlevel
[05:17] <_2> histo if it's active syslog might also be relevant
[05:17] <darkblue_B> Hey! I use netatalk for AppleShare volumes *every day* and I just ran the updater for Ubuntu and now it *broke*!! this is bad.. I have done everything called for, including setting some magic line somewhere telling the updater not to mess with it.. Where can I go to find out how to remedy this.. :-(
[05:17] <_2> histo runlevel
[05:17] <_2> :)
[05:17]  * _2 watches histo slap his forehead 
[05:18] <fourpointfivetb> read an article stating desktop was easier to set up as a noob
[05:18]  * histo ouch
[05:18] <histo> _2: ty that seems to have done the trick
[05:18] <redvamp128> fengshaun:  I am still looking be patient-- but I think Gamma is the settings generally that you can do it with software by moving the slider.
[05:18] <_2> you are selcome
[05:18] <_2> welcome maybe
[05:19] <fengshaun> redvamp128: where can I find that setting?
[05:19] <raz_-> tritium, it seems that after a reboot, I need to run "nvidia-xconfig" and then restart X.. I think it might have to do something with "configured video device" vs "device" section under xorg.conf -- What do you think?
[05:19] <_2> never tryst commandw fron soneome that cant' tpye
[05:19] <fengshaun> I couldn't find it in the menues.
[05:19] <raz_-> and then restart X, for the driver to work again*.
[05:19] <martin_> ffuuuu about http://pastebin.com/m52b0f7e8
[05:19] <martin_> bad concert
[05:20] <tritium> raz_-: I've never seen such a thing happen.  No, that shouldn't be the problem.
[05:20] <_2> histo you still need to find and fix that issue.  just changing runlevels wont keep it from reoccuring
[05:20] <markk^> hi, i have errors on one of my ntfs drives, how can i scan it for errors?!
[05:22] <_2> vbrun40000000.dll
[05:22] <Sago> #mpc
[05:22] <redvamp128> fengshaun:  I have my onboard disabled-- but I did find gamma in the xorg file but I would back that one up before modifying - The default appears to be 1.0 but more than likely to get it dim would be 0.9 or 0.8
[05:22] <qcjn> if i change grub, with what i,ve posted, is there a risk that i can't get back to ubuntu, if it's wrong ??
[05:22] <markk^> can anyone help perhaps?
[05:22] <fengshaun> redvamp128: ok, I will see what I can do.  Thanks for your help =)
[05:22] <redvamp128> fengshaun:  that file is located /etc/X11/xorg.conf
[05:22] <cowbud> qcjn: you can always get back with a rescue cd
[05:22] <cowbud> shoooot
[05:23] <redvamp128> fengshaun:  make a backup copy of it first before messing with it
[05:23] <_2> qcjn if you know anything about editing grub or using the grub prompt.  then "NO"  if you don't then yes.
[05:23] <markk^> anyone?
[05:23] <fengshaun> redvamp128: yup, definitely!
[05:23] <fengshaun> redvamp128: thanks!
[05:23] <redvamp128> fengshaun:  that and it needs to be edited with sudo
[05:23] <redvamp128> fengshaun:  default gamma is 1.0 so go down no more than .5
[05:23] <histo> _2: I think it had to do with updates that have been installed the system probably needs rebooted
[05:24] <_2> qcjn what i'm saying is,  if you know how to edit grub you can always change things at boot time as needed, and if you know how to use the grub prompt then you don't even need a menu.lst to boo.
[05:24] <_2> boot
[05:24] <fengshaun> redvamp128: ok! =)
[05:24] <paradigm|shift> hi how do I restart x
[05:24] <_2> histo needing rebooted, "unless your libc6 has changed" should never cause that.
[05:25] <paradigm|shift> yo yo yos Im in the terminal right now how do I restart x
[05:25] <paradigm|shift> :/
[05:25] <_2> paradigm|shift sudo /etc/init.d/?dm restart
[05:25] <paradigm|shift> YEA!
[05:26] <qcjn> _2 no don't really know anything about grub. I've played a bit in in to diminish the list of upgrade, and to stop it so i choose instead of startinf default after 10 second, but thats all
[05:26] <darkblue_B> uurrrgh
[05:27] <martin_> hi
[05:27] <_2> qcjn you can play with the grub shell while in the safty of the linux system   to learn about it.    in a terminal type "grub"   and then enter  help
[05:27] <qcjn> ok
[05:28] <darkblue_B> I cant trust minor updates ??! I thought linux was past this
[05:29] <cowbud> darkblue_B: probably need to be a bit more specific
[05:29] <histo> darkblue_B: what are you talking about?
[05:29] <darkblue_B> Hey! I use netatalk for AppleShare volumes *every day* and I just ran the updater for Ubuntu and now it *broke*!! this is bad.. I have done everything called for, including setting some magic line somewhere telling the updater not to mess with it.. Where can I go to find out how to remedy this.. :-(
[05:29]  * cowbud nods to histo
[05:29] <szrhawaii> does anyone know of a program that will backup an exact copy of my current system in the package manager
[05:29] <_2> qcjn by learning how to manually enter the  root (hd0,1) ; kernel /boot/vmlinuz[tab] root=/dev/sda2   ; initrd /boot/init[tab]     <<<< stuff you can make sure that if you get to the grub prompt you can always get linux up and running.
[05:29] <doc`> http://pastebin.com/m7f2f85c6 i dont know what to do with the 2 highlighted lines
[05:29] <histo> szrhawaii: youc an export a package list
[05:30] <szrhawaii> histo what about files and settings as well
[05:30] <martin_> omper source ok
[05:30] <histo> szrhawaii: dpkg --get-selections > installed-software
[05:30] <histo> szrhawaii: well files and settings are saved in your users ~
[05:30] <martin_> lemery open source
[05:30] <_2> while it's not top priority,  i do feel that everyone should learn at least the basics of their boot loader.
[05:30] <qcjn> _2: grub help, doesn't really help me, :(
[05:31] <histo> szrhawaii: your best bet is to go with a seperate /home thats what I do. That way if yous witch distros or reinstall what have you. You still have your docs etc...
[05:31] <qcjn> anyway i ll look for in google
[05:31] <histo> !seperatehome | szrhawaii
[05:31] <_2> qcjn add to it.     help root       help kernel
[05:31] <qcjn> ok
[05:31] <histo> !home | szrhawaii
[05:31] <hbguy> ok
[05:31] <szrhawaii> I know how to make seperate homes
[05:31] <histo> szrhawaii: well youc an use dd and back up the home
[05:31] <hbguy> hi
[05:32] <szrhawaii> dd
[05:32] <_2> qcjn and i gave a short tutorial already.  root (hd0,1) \n kernel /boot/vmlinuz[tab] root=/dev/sda2  \n initrd /boot/init[tab]  <<<  where [tab] means hit the tab key...
[05:33] <darkblue_B> cowbud: I had the naive intention of working tonight
[05:33] <_2> basicly that's about all you need to boot linux.
[05:33] <szrhawaii> i keep hearing about that but im looking for a specific program that actually makes a cd of a snapshot or image of my current systems state onto a cd so if I ever crash it will go right to where i left it like nothing ever changed almost like ghosting
[05:33] <martin_> nite :)
[05:33] <szrhawaii> you ever hear of a application or program like that for linux
[05:33] <cowbud> darkblue_B: if you are trying to interact between mac and linux just use samba both support it well
[05:33] <histo> szrhawaii: ahh gotcha hold up I know I had one I was looking at before.
[05:33] <darkblue_B> groooaannnn
[05:34] <redvamp128> szrhawaii:  I did find this Howto: Backup and restore your system! - Ubuntu Forums <http://ubuntuforums.org/showthread.php?t=35087>
[05:34] <szrhawaii> ill check it out
[05:35] <cowbud> darkblue_B: multiple options are sad aren't they btw what release are you running?
[05:35] <histo> szrhawaii: partiion image on the install cd would work
[05:35] <histo> szrhawaii: here this cd has it as well. http://www.sysresccd.org/Main_Page
[05:36] <krister> quick question: does anyone know how to keep gnome from combining apps into one button on the panel (taskbar) at the bottom of the screen?
[05:36] <histo> szrhawaii: or you can install partimage froma add/remove
[05:36] <szrhawaii> ok
[05:36] <qcjn> _2: excuse me, but i don't understand !!
[05:36] <darkblue_B> cowbud: I can supply any info you or nayone might find useful
[05:37] <cowbud> darkblue_B: the question was pretty direct..
[05:37] <qcjn> _2: you're saying, that these lines are all i need
[05:37] <qcjn> _2: or about !
[05:37] <_2> qcjn in the grub prompt.  yes.
[05:37] <TruthTaco> i have a dual core processor... should i be using the 32 bit or 64 bit ubuntu
[05:37] <qcjn> _2: what's a grub prompt ?
[05:37] <_2> qcjn oh.  of course the last line is always "boot"
[05:37] <c0rrupt0r> would it be a conflict if i found 3 different versions of linux-restricted-modules installed on my system?
[05:38] <rww> krister: multiple windows from one app being combined, you mean? right-click the grab bar on the left side, click Preferences, click Never Group Windows.
[05:38] <rww> c0rrupt0r: shouldn't be. you can have more than one kernel, or the respective modules, installed at once
[05:38] <darkblue_B> Ubuntu 8.04 amd64 cowbud.. if I could tell you which pkgs were just updates I would but I dont know hwo to get that list
[05:38] <qcjn> when i start my computer i don't see a grub prompt
[05:39] <c0rrupt0r> rww: ty
[05:39] <_2> qcjn that's where terminal command "grub" takes you.   it's also where escape c  at the boot menu will take you.
[05:39] <krister> rww: thank you! that is what i was looking for...ive tried right clicking all over the place but didnt realize that little portion of panel was an option
[05:39] <cowbud> darkblue_B: cd /var/cache/apt/archives; ls -lart
[05:39] <_2> it is c isn't it ???
[05:39] <rww> TruthTaco: depends on which exact processor you have, since only some support 64-bit. Generally, though, if you don't know which to use, use 32-bit (since 64-bit processors can run it too)
[05:39] <Brack10> I get a much better framerate for Compiz in KDE than I do in Gnome.  Anyone know how I can increase my performance?
[05:39] <silv3r_m001> hi there
[05:40] <roy_hobbs> Can the telnet program do tn3270?  Is that what the -S option is for?
[05:40] <silv3r_m001> using apt-get command how can I check whether a certain package is installed or not ?
[05:40] <_2> silv3r_m001 no.
[05:40] <silv3r_m001> _2: what ?
[05:40] <rww> silv3r_m001: apt-cache search <packagename> will do it. Or do you specifically need to use apt-get?
[05:40] <_2> silv3r_m001 use dpkg
[05:40] <cowbud> darkblue_B: and you always have /var/log/dpkg.log
[05:40] <TruthTaco> rww, well lets assume that my processor does support 64 bit... will things run faster in 64bit?
[05:41] <silv3r_m001> _2: how to use dpkg ?
[05:41] <TruthTaco> ( i dont know if i does but i suppose i can check)
[05:41] <qcjn> _2: i didn't know that..i just tried grub in terminal and it work, and what you say is when my computer start, if i make escape + c , it will bring me there
[05:41] <_2> silv3r_m001 dpkg -L package-name
[05:41] <silv3r_m001> rww: I cant find this package called glib in synaptic package manager
[05:41] <rww> !info glib
[05:41] <_2> silv3r_m001 or lower case -l
[05:41] <rww> silv3r_m001: glib isn't a package name
[05:41] <silv3r_m001> _2: how can I use a wildcard ?
[05:42] <lstarnes> silv3r_m001: look for libglib*
[05:42] <qcjn> _2: in the terminal, grub
[05:42] <Marts> http://www.thesun.co.uk/sol/homepage/news/article2233878.ece
[05:42] <silv3r_m001> rww: then ... I am trying to installed epiphany browser from source and it needs a higher version of glib than the one on my system
[05:42] <_2> silv3r_m001 dpkg -l libc*
[05:42] <rww> TruthTaco: depends on what sort of things you do on your computer. some forms of math and scientific computing work faster; video editing might too. Other than that, probably not. 64-bit also (allegedly) has compatibility problems sometime (with flash, java, or hardware), but I haven't had that problem
[05:42] <darkblue_B> cowbud: http://dpaste.com/120428/
[05:42] <silv3r_m001> lstarnes: hmm let me check
[05:42] <darkblue_B> the last remove/install of netatalk I just did now..
[05:42] <hat586> this is my first time come here
[05:42] <TruthTaco> ah thanks, thats what i needed to know
[05:43] <_2> qcjn yes.  and at boot time.   [esc]   c    for grub prompt  which you have been looking at in the terminal.
[05:43] <darkblue_B> I probably blew away those special flags I set but I was going to try because it seems really broken.. :-(
[05:43] <rww> silv3r_m001: specifically which version?
[05:43] <_2> qcjn i'll stop before i confuse you even more.
[05:43] <silv3r_m001> _2: btw whats the difference between apt-get and dpkg ?
[05:43] <hat586> time to having lunch
[05:43] <qcjn> _2: ok
[05:43] <ociugi> how to disable compiz
[05:43] <silv3r_m001> rww: it needs 2.16.0
[05:43] <silv3r_m001> and my system has 2.0
[05:43] <darkblue_B> AppleShare services make me happy to use Linux.. not having them makes me un-happy
[05:44] <lstarnes> silv3r_m001: apt can use online package databases and download packages from the internet but dpkg only works with packages that have already been downloaded or are in the local database
[05:44] <darkblue_B> Samba -> land of Mordor
[05:44] <_2> silv3r_m001 apt-get fetches from the web and gets dependancise too  dpkg  installs/removes/lists  local package-name    apt is a frontend to dpkg
[05:44] <preston> wierd every since i updated my firefox when i open it it goes somewhat fullscreen any thoughts?
[05:45] <ociugi> rww: how to disable compiz?
[05:45] <lstarnes> silv3r_m001: what is the output of aptitude shjow libglib2.0-0 | grep Version?
[05:45] <silv3r_m001> rww: in synaptic the installed version of libglib is 2.16 but the epiphany ./configure says that its 2.0 which is less than 2.16
[05:45] <rww> ociugi: In GNOME? System > Preferences > Appearance > Visual Effects > None
[05:46] <_2> preston my thought would be, "use a real browser" but you don't want to hear that...
[05:46] <qcjn> _2: thanks
[05:46] <lstarnes> silv3r_m001: make sure you also have libglib2.0-dev installed
[05:46] <_2> qcjn welcome
[05:46] <silv3r_m001> lstarnes: hmm let me install that
[05:46] <c0rrupt0r> is there a way to find out what the last updates where made on a system?
 tnx
[05:46] <silv3r_m001> lstarnes: its already installed
[05:46] <TruthTaco> one more question.... should i install the latest or 8.04.2
[05:46] <TruthTaco> (ubuntu)
[05:47] <TruthTaco> is there that big a difference between them?
[05:47] <_2> TruthTaco depends on your needs
[05:47] <_2> TruthTaco yes.  one is "LTS" the other is "latest"
[05:47] <Gnea> TruthTaco: 8.04.2 is LTS, 8.10 will be obsolete in 2 months
[05:47] <rww> TruthTaco: 8.10 is supported for 18 months. 8.04 is supported for 3 years (it's a long term release).
[05:47] <excalibas> _2, What is a real browser?
[05:47] <markk^> anyone able to help-how can i scan an NTFS drive for errors??
[05:47] <Gnea> !LTS
[05:48] <TruthTaco> ah
[05:48] <carpii> also if you want to use KDE, be aware that 8.10 will install kde 4.1.x and you cant use KDE 3.5 (which is the nice stable version)
[05:48] <TruthTaco> thanks
[05:48] <_2> excalibas konqueror
[05:48] <carpii> personally id go for 8.04, fewer problems in general
[05:48] <TruthTaco> yea i think i will go with 8.04
[05:48] <c0rrupt0r> is there a way to find out what the last updates where made on a system?
[05:49] <darkblue_B> carpii: except with netatlk and minor updates :-(
[05:49] <rdvonz> anyway to install suse11.1 from an ubuntu install w/o a cd?
[05:49] <silv3r_m001> lstarnes: the epiphany ./configure says No package 'libgnome-2.0' found  but libgnome is installed as I can see it in synaptic
[05:49] <rww> c0rrupt0r: you could try looking in /var/log/, especially /var/log/apt/term.log
[05:49] <_2> c0rrupt0r look in the dpkg.log
[05:49] <rww> rdvonz: Ask in #suse
[05:50] <c0rrupt0r> ever since it had updated it has been using resources like crazy
[05:50] <Gnea> markk^: with the ntfsprogs package (ntfsfix), but it may not get all 100% errors fixed
[05:50] <rdvonz> rww: i'm using ubuntu atm. The linux version I'm going to install is irrelevant.
[05:50] <Gnea> markk^: you may yield better results if you use the ntfs-3g driver
[05:50] <_2> rdvonz quite the contrarry
[05:50] <Gnea> rdvonz: on the same system or a different one?
[05:50] <silv3r_m001> rww: ﻿the epiphany ./configure says No package 'libgnome-2.0' found  but libgnome is installed as I can see it in synaptic
[05:51] <rww> rdvonz: You're trying to install SuSE. You need to ask the SuSE people how to do that. We don't provide support for SuSE installation.
[05:51] <rdvonz> Gnea: same system
[05:51] <_2> rdvonz the target install is the only really relavent
[05:51] <Gnea> rdvonz: then you should ask in #suse
[05:51] <rdvonz> You. Don't. Understand.
[05:51] <darkblue_B> .. just tar'd up all my work and copying it my Mac, so I can get something done
[05:51] <Gnea> rdvonz: please explain then
[05:51] <markk^> thanks Gnea , i appreciate it
[05:51] <matt2154> Under Kubuntu, is it possible to make Firefox run with GTK widgets instead of Qt widgets?
[05:51] <_2> rdvonz no.  you don't understand.
[05:51] <Gnea> _2: let's hear him out...
[05:52] <rdvonz> how can I install a new linux dist without using a cd or any other physical media.
[05:52] <rdvonz> Say, ubuntu >.>
[05:52] <markk^> err
[05:52] <markk^> put it in a virtual machine
[05:52] <Gnea> yeah
[05:52] <Gnea> rdvonz: virtualbox or vmware would work, you could run both concurrently
[05:52] <rww> rdvonz: For Ubuntu, you'd either VM it or use https://help.ubuntu.com/community/Installation/FromLinux
[05:52] <rdvonz> you can do it with windows. making a new  grub profile or something.
[05:52] <ociugi> i already installed the w32codecs but the problem is still exist it play the video with sounds but no images.
[05:52] <matt2154> I do a lot of netboot installs
[05:52] <markk^> or perhaps wubi (if you can install from iso)?
[05:52] <SBBG> hey guys...i have just installed ubuntu on my laptop after vista..but sound is very bad...what i do?
[05:53] <_2> rdvonz that question can only be answered by the people that suppor the install methoods of the target.  not by the people that support the platform you start from.
[05:53] <Gnea> rdvonz: or as rww suggests - forgot about that one
[05:53] <Newbuntu2> hello
[05:53] <ociugi> rww: i already installed the w32codecs but the problem is still exist it play the video with sounds but no images.
[05:53] <Brack10> how can I disable the compiz fps limiter?  sync to VBlank and increasing the refresh rate does not work.  However when I do the benchmark tool and disable frame limiter, my performance increases literally 10 fold.  Anyone?
[05:53] <histo> ociugi: what type of video?
[05:53] <rdvonz> thanks
[05:53] <ociugi> any type
[05:53] <Gnea> rdvonz: good luck
[05:53] <ociugi> histo: any type
[05:53] <rww> ociugi: Please direct your questions to the channel unless you're replying to someone who's helping you with your problem.
[05:53] <Newbuntu2> Can someone point me to a guide for making a ubuntu liveUSB? I can't find it in the FAQ
[05:53] <histo> !codecs | ociugi
[05:53] <rww> !usb | Newbuntu2
[05:54] <Gnea> !usb | Newbuntu2
[05:54] <Newbuntu2> thanks!
[05:54] <SBBG> hey guys...i have just installed ubuntu on my laptop after vista..but sound is very bad...what i do?..any codec for sound
[05:54] <silv3r_m001> hi there
[05:54] <Gnea> oops
[05:54] <_2> rdvonz i personally don't mind supporting any distro.  (and should probably be in ##linux)  but what you are askind is a suse question, not at all a ubuntu question.
[05:54] <histo> SBBG: what doyou mean by sound is very bad?
[05:54] <Gnea> _2: we've already settled it
[05:54] <nsadmin> SBBG: whoever's going to help you will need specific details
[05:54] <rww> Brack10: You may want to ask in #compiz-fusion if you don't get an answer here.
[05:54] <markk^> CRAP
[05:54] <Brack10> rww: thanks
[05:55] <ociugi> rww: i understand
[05:55] <silv3r_m001> a package was already installed from synaptic and I upgraded it compiling the source downloaded from the site.. now what happens to the one installed from synaptic ..is it overwritten ?
[05:55] <markk^> gparted still show an exclamation mark next to /dev/sda2:(((
[05:55] <_2> Gnea is that a "shut up"  or what ?
[05:55] <Gnea> markk^: what did you do?
[05:55] <Gnea> _2: pretty much :)
[05:55] <rww> silv3r_m001: probably, yeah. Do you need instructions for reinstalling the Ubuntu package?
[05:55] <_2> Gnea ok.
[05:55] <markk^> well originally went to resize sda2, but it failed saying that i had not shutdown windows properly (xp / ubuntu dial boot)
[05:55] <Gnea> ...
[05:55] <markk^> but i cant get back into XP BOOT_MGR NOT FOUND
[05:56] <markk^> so i wanted to fix the ntfs partition and install ubuntu to the hdd, and worry about xp later
[05:56] <Gnea> markk^: were you trying to make sda2 bigger or smaller?
[05:56] <SBBG> histo: when i start playing video..video quality is fine but for sound first 5-6 seconds is fine but after that its like disturbance
[05:56] <markk^> smaller
[05:56] <silv3r_m001> rww: but will synaptic now be able to track the new version files ... since it still shows the old version
[05:56] <c0rrupt0r> ok i found out it there was a ppa repository added, and then it updated to linux-restricted-modules-common_2.6.27-12.17..now i go to synaptic's to remove that and its asking to remove all of them at once..what shall i do to get back to the older version i had?
[05:57] <rww> silv3r_m001: If you install or compile stuff manually, Synaptic and apt-get can't track it, no
[05:57] <nsadmin> isn't there a specific date?
[05:57] <matt2154> Is it possible to make firefox use gnome widgets under KDE?
[05:57] <Gnea> markk^: resizing ntfs can be tricky - anytime that it gets errors like that, it should really be fixed using real windows tools before doing the actual resize..
[05:57] <silv3r_m001> rww: hmm....can it create any kind of issue or problem later ?
[05:57] <histo> SBBG: what like static?
[05:58] <histo> !sound > SBBG
[05:58] <markk^> Gnea,  i cant get into windows buddy
[05:58] <markk^> it's a netbook, so no cd/dvd drive
[05:58] <markk^> ive got a dvd enclosure coming so i can chuck an old dvdr in it, to make things like installing an os easier;)
[05:58] <markk^> but i cant get to windows to fix the problems atm
[05:59] <matt2154> markk: is there actually a problem with that partition, or did you just not do a clean shutdown from windows?
[05:59] <Gnea> markk^: hmmm.. do you have a second system?
[05:59] <markk^> did not do a clean shutdown sir
[05:59] <markk^> yea
[05:59] <silv3r_m001> rww: and if I need to revert back to the ubuntu installed how do I do that ?
[05:59] <markk^> ubuntu machine im on atm
[05:59] <rww> silv3r_m001: Sometimes, yes. If Ubuntu issues an updated version of the package, Synaptic/APT will try to update your computer with it, and you might end up with detritus from the compile-from-source. With libraries, though, you probably won't have an issue.
[05:59] <markk^> and a laptop running ubuntu/gentoo
[05:59] <markk^> :|
[05:59] <FloodBot1> markk^: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[05:59] <SBBG> histo, yes alsa mixer selected..but sound is choppy
[05:59] <histo> markk^: What are you trying to do fix a ntfs drive?
[05:59] <rww> silv3r_m001:  sudo apt-get remove --purge <package> && sudo apt-get install <package>
[05:59] <markk^> histo, yea:)
[06:00] <histo> SBBG: check the message from ubottu with some tips for your sound issue
[06:00] <c0rrupt0r> there was a ppa repository added, and then it updated to linux-restricted-modules-common_2.6.27-12.17..now i go to synaptic's to remove that and its asking to remove all of them at once..what shall i do to get back to the older version i had?
[06:00] <silv3r_m001> rww: also how can I uninstall a software which was installed using the ./configure make and make installed process ?
[06:00] <histo> markk^: you need the fixmbr program of a windows cd. or you can use grub boot loader to boot the windows partition for the time being.
[06:00] <bpcomp> could someone help me recover my package manager please? http://paste.ubuntu.com/117925/
[06:00] <rww> silv3r_m001: You'd need to ask the software's maintainers about that. The process tends to be different for different software.
[06:00] <histo> markk^: do you have  thumb drive?
[06:00] <silv3r_m001> rww: means no standard uninstall technique ?
[06:00] <markk^> histo, yea im booted up into ubuntu on it atm - that's how i was booting ubuntu (as nc10 has no dvd drive)
[06:01] <nsadmin> silv3r_m001: look at the install log, try to figure out what files were installed and remove each. should take an hour or two
[06:01] <rww> silv3r_m001: correct. It's one of the reasons we don't recommend installing programs manually
[06:01] <markk^> then i planned to install to the hdd, but in the meantime, the xp went wrong!
[06:01] <silv3r_m001> rww: and thats why synaptic is used.....
[06:01] <silv3r_m001> nsadmin: removing all files is enough ...
[06:01] <histo> markk^: what went wrong with the xp boot loader error or seomthing?
[06:01] <rww> silv3r_m001: correct, because the package system makes it easy to uninstall stuff.
[06:02] <nsadmin> or maybe you're lucky and the makefile has an uninstall target... read the makefile and see
[06:02] <markk^> histo, after i attempted to resize the drive and it failed, rebooted and it just says BOOT MGR NOT FOUND, when I boot off the first drive :(
[06:02] <rww> markk^: As far as I know, Linux's NTFS tools don't have a filesystem checker. The consensus is that if you're using NTFS, which is a closed, proprietary system owned by Microsoft, you should be using Microsoft's tools to make sure it's working.
[06:02] <WebcamWonder> !backup
[06:02] <WebcamWonder> !factoid
[06:03] <histo> markk^: on a windows cd there is a utility called fixmbr that will rewrite the mbr of the drive so that it will hit the boot.ini
[06:03] <histo> !botabuse > WebcamWonder
[06:03] <bemuse> org
[06:03] <WebcamWonder> histo: Yeah, I know. I forgot :)
[06:03] <_shadow_> best way I heard of backing up ur system is to just tar most of whats in / and then untar them on a fresh install
[06:03] <histo> markk^: the other option is that you install grub ont he drive and point it at the windowspartition
[06:04] <nsadmin> still, that message (about making backups) could be public service
[06:04] <histo> markk^: to see if that will help. Then you can boot windows defrag shutdown and resize.
[06:04] <markk^> i think the second grub option would be better, as i have no cd drive atm
[06:04] <silv3r_m001> rww: now what is this... I have gnome desktop and in synaptic the gnome-desktop-environment package is not installed ?
[06:04] <markk^> im thinking i could do that, im in ubuntu atm, I can setup grub from the terminal iirc?
[06:04] <owen1> my FF beeps when i scoll with page+down and hit the bottom. can I silent it?
[06:04] <WebcamWonder> Does anyone remember what is the way to generate the list of currently installed softwares, so that I can install them later if I choose so?
[06:04] <thechris> I've bricked apt
[06:05] <rww> silv3r_m001: the gnome-desktop-enviroment is a metapackage that depends on gnome's various desktop package. Ubuntu generally installs the ubuntu-desktop package instead, which leaves out some GNOME tools (like Liferea, I think) and installs Ubuntu customizations.
[06:05] <Sarthor> Routing for multiple uplinks / providers.... My question is here.. http://www.linuxquestions.org/questions/linux-networking-3/routing-for-multiple-uplinks-providers-703789/
[06:05] <bpcomp> I tried to install a brother printer but there was an error during the install. Now I can't install or uninstall anything. could somebody please help me get rid of this brother printer driver
[06:05] <thechris> i can't install/remove apps because i have unmet dependencies that i can't fix without removing or install apps that
[06:05] <rww> WebcamWonder: I think the factoid for it was !clone, but if I remember correctly, the commands in it don't work right.
[06:05] <histo> data on the disk in ubuntu?
[06:05] <c0rrupt0r> how would i go back from a newer linux-restricted-modules-common to my last one i had?
[06:05] <markk^> histo, can i do the grub option from the current session (live session off the usb boot disk)
[06:05] <nsadmin> thechris: perhaps you have a mixed system?
[06:05] <histo> markk^: can you see data on the disk in ubuntu?
[06:06] <_shadow_> use sudo apt-get update
[06:06] <markk^> on the boot disk? besides the startup disks, nothing
[06:06] <markk^> oh the ntfs, yes
[06:06] <rww> WebcamWonder: I guess you could try them and see. If they don't give you an error, you should be okay.
[06:06] <thechris> nsadmin: explain more
[06:06] <chu_> I downloaded a theme engine, but I can't seem to install it?
[06:06] <histo> markk^: k well the data is safe yeah you should be able to install grub from the live session.
[06:06] <histo> !grub | markk^
[06:06] <nsadmin> multiple versions of ubuntu won't work together well
[06:06] <WebcamWonder> rww: Yeah, found them. Lets see if they work or not. Thans
[06:06] <thechris> nsadmin: no, thats actually the only solution i've found to installing kde4.2
[06:06] <histo> markk^: ahh you have no grub boot disk.
[06:06] <markk^> i have a question, probably obvious, /dev/sda2 has windows, is that where i install grub to then?
[06:07] <nsadmin> so you do have a mixed system
[06:07] <WebcamWonder> rww: Yup, doesn't work anymore. Invalid regex
[06:07] <thechris> nsadmin: no.  but if i did, it wouldn't have this specific issue
[06:07] <nsadmin> is kde 4.2 available in the version of ubuntu you have installed?
[06:07] <rww> WebcamWonder: on which command? The first or the second?
[06:08] <thechris> nsadmin: basically, i installed kde4.2 from ubuntu 8.10.  which is horrible on the menus.  so i tried 4.2 from kubuntu.  which fails and bricks kde
[06:08] <dinesh372> i stucked with the installation of network simulator at the last stage can anyone help
[06:08] <bpcomp> is there a better channel for asking package manager specific question?
[06:08] <WebcamWonder> rww: The first command, but I found a native solution. dpkg --get-selections, achieves exactly the same thing, without parsing
[06:08] <rww> bpcomp: not really, no
[06:08] <thechris> nsadmin: I've follow, as best I can, the instructions on kubuntu.com.  but the details are sketchy
[06:08] <c0rrupt0r> how would i go back from a newer linux-restricted-modules to an older version?
[06:08] <thechris> nsadmin: eg, I have no idea what plasmoids, if any, are installed by default
[06:08] <nsadmin> probably you're going to have to uninstall all the kde things and try to install stuff again
[06:09] <bpcomp> rww: could you take a loo at this then please http://paste.ubuntu.com/117925/
[06:09] <thechris> nsadmin: i cant uninstall anything
[06:09] <ste-foy> Hello I' wana know to my x-chat can read .wav sound, and sorry for my bad English ?
[06:09] <thechris> nsadmin: actually, what command would you suggest for uninstall?
[06:09] <nsadmin> thechris: yes you can... get familiar with dpkg: dpkg --help to start with
[06:10] <rww> bpcomp: It's complaining that /etc/init.d/lpd doesn't exist. You could try issuing the following command: sudo touch /etc/init.d/lpd
[06:10] <histo> markk^: you could also make a super grub boot disk on the usb drive
[06:10] <rww> WebcamWonder: Awesome :)
[06:10] <WebcamWonder> rww: If you have the admin priv., you might want to update it :)
[06:10] <bpcomp> rww: I manually checked the folder and lpd doesn't exist
[06:10] <test904alph> 00:05.0 Network controller: RaLink RT2600 802.11 MIMO having terrible time getting this2work any help???
[06:10] <markk^> il have to read up on it, not sure how to do that histo , as the usb drive is also a startup disk?
[06:10] <rww> bpcomp: I know, hence it complaining. The touch command creates a new, empty file with the name specified.
[06:10] <histo> markk^: ahh well try following the directions from ubottu
[06:11] <matt2154> Are there alternate language irc channels?  I've got a french speaker asking for help in the kubuntu channel
[06:11] <WebcamWonder> !fr | matt2154
[06:11] <dinesh372> i stucked with the installation of network simulator at the last stage can anyone help
[06:11] <ali2> hello
[06:11] <rww> matt2154: direct them to #ubuntu-fr or issue the !fr factoid
[06:11] <matt2154> ubottu: merci
[06:11] <bpcomp> rww: ah, I did not know that, thanks.
[06:11] <rww> WebcamWonder: I don't. There are factoid submission instructions at https://wiki.ubuntu.com/UbuntuBots#Using%20Ubottu
[06:12] <nsadmin> the day dpkg can't be used to uninstall packages (and to install them) is the day ubuntu breaks its status as "based on debian"
[06:12] <ali2> www styleleathergarmenets.com
[06:12] <thechris> nsadmin: hmm, that might help.  any suggestions on how to manually resolve such dependency issus
[06:12] <histo> markk^: your problem is that linux isn't installed thought at least from what I understand.
[06:12] <markk^> yea
[06:12] <markk^> that's correct
[06:12] <nsadmin> thechris: first step: find out what they are
[06:12] <c0rrupt0r> how would i go back from a newer linux-restricted-modules-common to an older version?
[06:12] <rww> ali2: don't do that here
[06:12] <chu_> How do I install a gtk+ theme? I have the file downloaded....
[06:12] <bpcomp> rww: http://paste.ubuntu.com/117926/
[06:12] <WebcamWonder> rww: Ahh, cool. I will see if I can do that once I am finished getting Intrepid installed :)
[06:13] <thechris> nsadmin: so, it seems ksysguard relies on libplasma3, which cannot be installed with kde4.2
[06:13] <bpcomp> rww: what permissions should I give it?
[06:13] <thechris> nsadmin: but i'm not sure I'm parsing the errors correctly
[06:14] <test904alph> 00:05.0 Network controller: RaLink RT2600 802.11 MIMO Help please
[06:14] <thechris> nsadmin: eg, it says ksysgaurd has unmet dependencies -- depends libplasma3 but it's not going to be installed
[06:14] <c0rrupt0r> hmmm guess no answer lol
[06:14] <nsadmin> try dpkg --purge ksysgaurd
[06:14] <histo> markk^: the only way I see of fixing this then is adding some utilities to your thumb drive.
[06:14] <histo> markk^: this is also why ntfs sucks
[06:15] <SBBG> hey guys my sound is very choppy..kindly help
[06:15] <SBBG> histo: when i start playing video..video quality is fine but for sound first 5-6 seconds is fine but after that its like disturbance
[06:15] <rww> bpcomp: huh, that's odd. Try chmod 777 /etc/init.d/lpd, then remember to delete the file when the uninstall is done: rm /etc/init.d/lpd
[06:15] <markk^> i could perhaps install ubuntu to a usb drive and edit menu.lst once i have ubuntu on
[06:15] <thechris> nsadmin: so, it says kubuntu-desktop depends on ksysguard, and it won't remove it
[06:15] <Gnea> markk^: there is another way, although it's going to require some work on your part... have you ever setup a netboot?
[06:15] <rww> !ubuntu-desktop | thechris
[06:15] <markk^> nope, i had been trying to get tftp boot working, but i kept getting E11 ARP TIMEOUT !
[06:16] <nsadmin> thechris: add kubuntu-desktop to the command
[06:16] <dinesh372> network simulator help
[06:16] <nsadmin> and keep adding as it tells you more deps
[06:16] <bpcomp> rww: http://paste.ubuntu.com/117928/
[06:16] <SBBG> hey guys...i have just installed ubuntu on my laptop after vista..but sound is very bad...what i do?..any codec for sound
[06:16] <thechris> nsadmin: hmm, that helped.
[06:16] <Gnea> !ask | dinesh372
[06:16] <WebcamWonder> During the installation, the installer would let me shrink my NTFS, so I can specify what size I want right?
[06:16] <c0rrupt0r> how would i go back from a newer linux-restricted-modules-common to my last one i had?
[06:16] <Aeonis> Hey everyone!
[06:16] <Aeonis> I could use some help.
[06:17] <histo> markk^: or you could boot the thumb drive now hit e and enter grub options to boot the master disk
[06:17] <markk^> oh
[06:17] <markk^> that sounds easiest of all
[06:17] <Aeonis> I'm on 2 diff laptops here and I can't seem to get the wireless to work.  I have it setup just like this laptop, but the connection is showing "never" and I can't turn it on.
[06:17] <rww> bpcomp: *sigh* Okay, this is gonna require a different approach. Give me a minute.
[06:17] <dr3w_> hey guys where do i find Compiz Config Settings Manager in gnome?
[06:18] <rww> !ccsm | dr3w_
[06:18] <dinesh372> Gnea: i stucked with the installation of network simulator at the last stage i can post the output if u give me link to paste
[06:18] <histo> markk^: There are some people on here that can help you out with that.
[06:18] <thechris> nsadmin: ok, i'm trying the upgrade from here.  I'm hoping it works.
[06:18] <dr3w_> koo ty
[06:18] <Gnea> dinesh372: what network simulator?
[06:18] <nsadmin> kootyz?
[06:18] <dinesh372> network simulator -3
[06:18] <Gnea> dinesh372: no such packagename.
[06:18] <rww> bpcomp: Do you have the package "cups-bsd" installed? If not, install it.
[06:18] <markk^> thanks histo  for all your help
[06:19] <dinesh372> Gnea: http://www.nsnam.org/
[06:19] <bpcomp> rww: I know this is weird but what we just did fixed my main problem
[06:19] <histo> markk^: see if you can get to a grub command line on from your thumb drive
[06:19] <nsadmin> thechris you might want to run dpkg --configure --pending before you proceed
[06:19] <histo> markk^: grub>
[06:19] <dinesh372> Gnea : its not the part of ubuntu package but i want to install it in ubuntu
[06:19] <rww> bpcomp: Heh. So things are working now? Or do you still have problems?
[06:20] <bpcomp> rww: every time I tried to install updates or anything new, remove old programs etc it couldn't proceed because of the brother printer drivers being in an error state
[06:20] <thechris> nsadmin: well, i think now i'm at the praying part.  I've already started teh upgrade.
[06:20] <histo> markk^: if you can do that I can prolly get it going.
[06:20] <histo> markk^: belive you hit esc to pull up grub menu and e for command line
[06:20] <test904alph> 00:05.0 Network controller: RaLink RT2600 802.11 MIMO
[06:20] <markk^> one moment, il reboot:)
[06:20] <Gnea> dinesh372: read this? http://www.nsnam.org/wiki/index.php/Installation
[06:20] <bpcomp> rww: I think the brother drivers are still bjorked but I can actually do other things with my package manager now
[06:21] <histo> markk^: err press c for command line
[06:21] <HLM111> need help with soundcard not working... I cant hear any sounds..
[06:21] <histo> markk^: at the grub menu
[06:21] <bpcomp> rww:  so you fixed my main problem. I'll try and figure the drivers out on my own now, thanks!
[06:21] <c0rrupt0r> how would i go back from a newer linux-restricted-modules-common to my last one i had?
[06:21] <c0rrupt0r> how would i go back from a newer linux-restricted-modules-common to my last one i had?
[06:21] <rww> bpcomp: excellent! Glad I could help :)
[06:21] <HLM111> im using a soundblaster mp3+ external soundcard
[06:21] <histo> c0rrupt0r: gdebi the one in /var/cache/apt/archives
[06:22] <histo> markk^: once you get there let me know.
[06:22] <cahaya-04> cahaya
[06:22] <cahaya-04> yes
[06:23] <durt> Trying to compile from tyrquake from source, everything compiles ok. Then I get this at the end: '/usr/bin/ld: cannot find -lXxf86dga'. Any clues?
[06:24] <test904alph> is this room for wireless support is is there a room for it?
[06:24] <cahaya-04> ybhujnfrgyu
[06:24] <cahaya-04> ietgig
[06:24] <cahaya-04> yh
[06:24] <thechris> so, does anyone know what Xorg does that it uses 18% CPU at all times?
[06:24] <cahaya-04> hh
[06:24] <cahaya-04> hg
[06:24] <cahaya-04> h
[06:24] <cahaya-04> gh
[06:24] <FloodBot1> cahaya-04: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[06:24] <rww> cahaya-04: Can we help you with something?
[06:24] <rww> Apparently not.
[06:24] <histo> thechris: doesn't here sitting at 1% with irc web rhythmbox etc.. all running
[06:25] <Myrth> how would i see what application locks a drive? so i can stop it and unmount
[06:25] <dinesh372> Gnea: it does not have anything relevant to my problem
[06:25] <thechris> histo: yeah, it idles at 18% here.  not sure why
[06:25] <histo> thechris: you running compiz?
[06:25] <cart2man> hey folks.  i'm trying to restore my software raid 10 device.  When I booted, 2 of 4 drives didn't come up.  I fiddled with the cables and now all 4 members come up but the drive is in a degraded state.  Can you pls help me repair?
[06:25] <thechris> histo: i assume whatever kde runs
[06:25] <dinesh372> Gnea: its about post installation issues
[06:25] <HLM111> need support: problem: sound not working
[06:26] <thechris> histo: not that turning graphics off does anything
[06:26] <Gnea> dinesh372: even the troubleshooting section?
[06:26] <deplanear> is there a way to see the shell commands running in the background when GUI-programs are doing things?
[06:26] <HLM111> my card is a creative labs sound blaster mp3+ external supported and it wont play sound
[06:26] <thechris> nsadmin: well, the install needed an apt-get -f install, but seems to have installed
[06:26] <thechris> nsadmin: thanks
[06:26] <dinesh372> Gnea: yes its about post installation
[06:26] <nsadmin> thechris: ahh, cool
[06:26] <Aeonis> I'm on 2 diff laptops here and I can't seem to get the wireless to work.  I have it setup just like this laptop, but the connection is showing "never" and I can't turn it on.
[06:26] <histo> thechriwhat type of cpu?
[06:27] <dinesh372> Gnea : and iam having trpuble in installation
[06:27] <c0rrupt0r> histo: the one in /var/cache/apt/archives is the one i want to uninstall any other place i might find the one i had installed before hand?
[06:27] <histo> Aeonis: you tyrong to connect to each other without router?
[06:27] <cart2man> if mdadm --detail /dev/md0 shows 2 of 4 devices as "removed", is there a way to add them without having data overridden?
[06:27] <histo> c0rrupt0r: you can see if there are archives online
[06:28] <Doitle> I seem to be having a strange problem where my SATA harddrive does not show up at all in ubuntu, as in I try to say install Ubuntu to it or access it in Gparted and it is just not there...
[06:28] <histo> c0rrupt0r: http://packages.ubuntu.com/ any reason in particular you want to do this?
[06:28] <nsadmin> Doitle: maybe a block device driver specific to your sata controller isn't inserted
[06:28] <Aeonis> histo:  I'm trying to get the other computer to connect to the router.
[06:28] <histo> markk^: you still there?
[06:29] <Aeonis> It's setup just the same, but the router is set to "never" and I can't get it on.
[06:29] <HLM111> need assistance: sound wont play with my supported sound card
[06:29] <Gnea> dinesh372: because it's not an officially supported software of ubuntu, I really can't help you with it. there seems to be some discussion on it here: http://ubuntuforums.org/search.php?searchid=55674782
[06:29] <histo> !wireless > Aeonis
[06:29] <nsadmin> HLM111: supported sound card... what driver?
[06:30] <Gnea> dinesh372: although, if you would like to use the pastebin site, perhaps we can find out if the problem is with nsnam or ubuntu
[06:30] <Gnea> !pastebin | dinesh372
[06:30] <c0rrupt0r> histo: some how my son and put a ppa repository onto my computer and it has now updated a fouled up linux-restricted-module
[06:30] <markk^> hey histo
[06:30] <markk^> yea sorry buddy
[06:30] <markk^> i got to grub, windows is checking my drives now:)
[06:30] <HLM111> what driver? I dont know, its on the list, and I just did a fresh install and updated everything the card is a creative labs soundblaster mp3+ external
[06:30] <histo> c0rrupt0r: well remove the repo and the package then update apt and install the one in the normal repos
[06:30] <Gnea> markk^: nice
[06:30] <markk^> how exciting i finally have ubuntu on my nc10!!!!!
[06:31] <histo> markk^:  cool yeah you can boot anything from grub command line as long as you can get there.
[06:31] <nsadmin> HLM111 try alsamixer
[06:31] <Aeonis> Hey histo, I used these to set it up and such...but I just can't get connected with the other.  I'm running 8.10 btw.
[06:31] <Scunizi> c0rrupt0r: you ought to be proud that he's using linux and able to actually do that :)
[06:31] <markk^> hey Gnea how do i make it so people don't see my host and just unaffiliated/mark ?
[06:31] <c0rrupt0r> haha yes im very proud of him at age 12
[06:31] <histo> markk^: You need to register to usernames and speak witht he ppl in #help
[06:31] <dinesh372> Gnea: i have pasted have you got that
[06:31] <Gnea> markk^: talk to someone in #freenode
[06:31] <HLM111> what am I suppose to hear from alsamixer?
[06:31] <Aeonis> I'm still a linux gnub.
[06:31] <Gnea> dinesh372: no i didn't catch it
[06:31] <markk^> histo, i still don't fully understand what happened to the MBR though? I didn't even install ubuntu i attempted to resize it failed, and then i couldn't boot xp anymore?!
[06:32] <histo> c0rrupt0r: well first make sure you sources.list doesn't have the ppa repo anymore.
[06:32] <nsadmin> HLM111: it doesn't make sound, it controls your card
[06:32] <Aeonis> Wait....histo....the driver was set to "deactivate", but whe nI activate it, it stays on and says that I have to reboot and when I do, is't still off.
[06:32] <histo> c0rrupt0r: then purge the linux-restricted-modules thats currently loaded. the sudo aptitude clean && sudo aptitude update && sudo aptitude install linux-restrcited-moduels-`uname -r`
[06:32] <HLM111> master and capture are both at 100%
[06:32] <Gnea> dinesh372: you have to tell me what the url is
[06:32] <nsadmin> and unmuted?
[06:33] <test904alph> !wireless
[06:33] <nsadmin> btw
[06:33] <thechis> nsadmin: so, that ended up bad.  kde lost its window borders...
[06:33] <HLM111> I dont know how to tell if there muted, but using the speaker in my topbar, they are unmuted
[06:33] <nsadmin> since alsamixer runs, there's a driver
[06:33] <dinesh372> Gnea: http://paste.ubuntu.com/
[06:33] <Doitle> nsadmin any ideas how I could remedy that? Would it show up in the "hardware drivers" thing? It says I have no proprierary drivers.
[06:34] <Gnea> dinesh372: no, the url that you made with the paste.
[06:34] <int256> When i start the ubuntu it says you are running in low graphics mode.
[06:34] <mib_k6kyh3> hello how do i chown a file?
[06:34] <int256> what is this
[06:34] <Gnea> !chown | mib_k6kyh3
[06:34] <HLM111> can someone point me to how to test my sound?
[06:34] <dinesh372> Gnea : i just typed my name dinesh372
[06:34] <nsadmin> mib_k6kyh3: man chown (and becareful with chown, it can do things you don't intend)
[06:35] <histo> ughh can't get my system to beep if i'm connected through ssh and using screen
[06:35] <mib_k6kyh3> i dont see any info about chwon there
[06:35] <Gnea> dinesh372: and when you click 'paste', it gives you the URL, like this:  http://paste.ubuntu.com/fd89s8fd0s8  so you need to paste that URL here, please.
[06:35] <histo> want irssi to beep if my name gets hilighted on the box that its running on with screen
[06:35] <Doitle> also if I do fdisk -l it shows nothing
[06:36] <Dr_Willis> Doitle,  put a sudo at the front of the command.
[06:36] <mib_k6kyh3> nsadmin: what will that do? how do i specify the file i want to chown?
[06:36] <Dr_Willis> Doitle,  sudo fdisk -l
[06:36] <Doitle> :P very stupid of me
[06:36] <int256> now i cannot enable visual effects
[06:36] <Doitle> still it only shows the three partitions of the flash drive I am running off of, not my main HDD
[06:36] <int256> pls help
[06:36] <Aeonis> I'm so close...it won't stay on.
[06:36] <Dr_Willis> Doitle,  what can cause confuseion.. is that some tim,es it will show stuff.. if you have a usb drive plugged in. and the user is in the right groups
[06:36] <mib_k6kyh3> sorry that is a manual page
[06:37] <Doitle> It is like this booting from live CD as well in addition to this persistent Live USB install
[06:37] <dinesh372> Gnea: http://paste.ubuntu.com/117933/
[06:37] <nsadmin> that, it is!
[06:37] <HLM111> how do I test my sound?
[06:37] <Gnea> mib_k6kyh3: gotta dig a little deeper... http://linuxcommand.org/lts0070.php#chown
[06:37] <nsadmin> looks like your sound has an alsa driver
[06:37] <wrinkliez> hey guys, is there any advantages to installing xfce or kde on ubuntu, rather than just installing (x)(k)ubuntu?
[06:38] <Dr_Willis> wrinkliez,  i always install the different desktops over ubuntu normally.. since i want them all . :)
[06:38] <nsadmin> what you might try is #alsa where they have a speaker test and alsa info script
[06:38] <Dr_Willis> wrinkliez,  saves me having to have 3 cds.. for one thin.
[06:38] <lstarnes> histo: try /set beep_msg_level HILIGHT
[06:38] <dinesh372> Gnea : had the link worked
[06:38] <mib_k6kyh3> um, this is sorta stupid but ow do i get out of the man and back to my terminal?
[06:39] <lstarnes> mib_k6kyh3: q
[06:39] <histo> lstarnes: yeah its just not beepting though
[06:39] <mib_k6kyh3> thanks
[06:39] <Gnea> dinesh372: okay, you'll need to install some development (-dev) packages, it looks like... here, it's asking for tcl 8.4, so if you do this:  apt-cache search tcl 8.4
[06:39] <Doitle> It took me a while to figure out q exits man pages :P
[06:39] <Dr_Willis> mib_k6kyh3,  man pages are using 'more' or 'less' :) the q key command quits that program
[06:39] <lstarnes> histo: also, try /set bell_beeps ON
[06:39] <Gnea> dinesh372: then you can find the package you need, install it, and try again
[06:39] <HLM111> can I ask for sound assistance in #alsa? or this channel only?
[06:39] <Dr_Willis>  'man more'  or 'man less' for details :)
[06:39] <mib_k6kyh3> i was trying crtl-c
[06:40] <nsadmin> Doitle, mib_k6kyh3: man uses less, and the q exits from less
[06:40] <Gnea> mib_k6kyh3: q for quit :)
[06:40] <mib_k6kyh3> yea
[06:40] <nsadmin> HLM111: both is probably fine
[06:40] <HLM111> ok
[06:40] <joss193> anyone using intel graphics drivers for linux?
[06:40] <Gnea> !anyone
[06:40] <HLM111> I found a youtube video for testing sound, and its not woking
[06:41] <histo> lstarnes: hrm.. that was off
[06:41] <lstarnes> histo: it's off by default
[06:41] <Gnea> !sound | HLM111
[06:41] <int256> how remove the updates
[06:41] <joss193> endless compiling here with interpid to get 300fps and 600fps only with whatever memory manager
[06:41] <Quintok> question: I'm having trouble playing encrypted dvds in mplayer.  here's the output when I try via terminal: http://paste.ubuntu.com/117934/ from what I can tell it's trying to play to the wrong video output
[06:41] <andrew__> hey I installed ubuntu but TOTEM won't play my files from my windows share...any ideas why ? i can browse folders fine
[06:42] <andrew__> it opens in totem but just sits at 0:00
[06:42] <Gnea> joss193: anything over 30 is usually pretty good
[06:42] <mib_k6kyh3> how do i check to make sure i am now the owner?
[06:42] <joss193> Gnea, games such pretty bad
[06:42] <sdlwof> i upgraded with apt-get, and now i have VERY poor video performance. how can i go back to my old video drivers?
[06:43] <HLM111> alsa mixer is selected it is labeled 'Sound Blaster MP3+ (Alsa mixer)'
[06:43] <Doitle> I have a /dev/sdb showing up but when I try to do "mount sdb" it errors
[06:43] <Gnea> mib_k6kyh3: please, read this, it'll tell you and it will probably answer many more questions you have (hint: look for ls): http://linuxcommand.org/learning_the_shell.php
[06:44] <Gnea> joss193: what card do you have and which driver are you trying to use?
[06:44] <joss193> Gnea, 945gm chip, 256ram
[06:44] <joss193> Gnea, tried gem at the moment, with out memory manager failed to init warning i can get 600fps
[06:44] <dinesh372> Gnea: yes i tried it earlier also tclx8.3 get installed but problem still exist
[06:44] <joss193> if that warning is there then 300fps
[06:45] <Gnea> joss193: what version of ubuntu?
[06:45] <joss193> Gnea, all say that hardy had 1500fps
[06:45] <joss193> Gnea, interpid
[06:45] <Doitle> I even tried multiple linuxes (all based on ubuntu though so I guess not as good) ubuntu, Xubuntu, LinuxMint
[06:45] <Gnea> dinesh372: you should only need 8.4, it seems. try removing the installation directory and untarring the tarball again
[06:45] <mhiku> in ubuntu, i used webmin for clamav, i cannot install Mail::Mbox::MessageParser how to install Mail::Mbox::MessageParser in perl?
[06:45] <HLM111> all my cables are connected properly, why is it sound refuses to work?
[06:46] <Gnea> joss193: on a laptop?
[06:46] <lstarnes> mhiku: try sudo apt-get install libmail-mbox-messageparser-perl
[06:46] <joss193> Gnea, yep, eepc901
[06:47] <cowbud> PuLse
[06:47] <sdlwof> how can i install my orginal video driver? i have poor performance. Takes 2-3 seconds to redraw the screen when i move windows. etc.
[06:47] <Gnea> joss193: ah, you should ask in #ubuntu-eeepc then
[06:47] <dinesh372> Gnea: remove the installation directory for tclx8.3 yes/no
[06:47] <dinesh372> 	
[06:48] <Gnea> dinesh372: perhaps you misunderstood: cd .. && rm -rf nsnasm-3.whatever/  or whatever it's called
[06:49] <Doitle> Is there anything I should try to bring sdb on and mounted? I'm guessing sdb is my SATA HDD since sda is the USB boot disk
[06:49] <Gnea> dinesh372: IOW, start the install again with a fresh base
[06:49] <ziroday> Hi, FUSA isn't displaying Shutdown, Restart and other power options
[06:50] <ziroday> nevermind worked it out
[06:50] <sdlwof> how can i install my orginal video driver? i have poor performance. Takes 2-3 seconds to redraw the screen when i move windows. etc.
[06:51] <Scuanor_> hello everybody :o) im having an issue with U Intrepid 8.10 ( im a newbie ). before i login with my password, my screen is set to 1280x1024, i want it though at 1024x768, how can i change that?
[06:51] <moniker127> I've got a question for you guys: How can I manually change the fan speed for my radeon 4800 series card? Its automatic control makes it run at 90c
[06:52] <mib_k6kyh3> any of yall gotten xen to run on 8.10?
[06:53] <durt> Trying to compile tyrquake from source, everything compiles ok. Then I get this at the end: '/usr/bin/ld: cannot find -lXxf86dga'. Any clues?
[06:54] <Dr_Willis> !find 86dga
[06:54] <Dr_Willis> durt,  that first one seems like a possibility.. or others in that list. :)
[06:54] <durt> Trying to compile tyrquake from source, everything compiles ok. Then I get this at the end: '/usr/bin/ld: cannot find -lXxf86dga'. Any clues?
[06:55] <durt> sry
[06:55] <durt> Dr_Willis: I have the last one installed
[06:55] <moniker127> Anyone here know how to enable the advanced view of the CCC on 8.10?
[06:55] <Dr_Willis> durt libxxf86dga-dev seems a likely needed one.
 thank you for this -> mhiku: try sudo apt-get install libmail-mbox-messageparser-perl
[06:55] <durt> Dr_Willis: I'll give it a try
[06:55] <Dr_Willis> durt,  i tend to 'shotgun install' lots of -dev packages when i need one.. Just in case. :)
[06:59] <test904alph> anyone know how to get the rt2600 wireless working...???
[06:59] <mhiku> i want to reboot ubuntu server, its dedicated hosting, how do i know that it will reboot fine?
[07:00] <loafers> Could someone update the repository for deluge
[07:00] <loafers> it is very outdated
[07:01] <Dr_Willis> loafers,  every 6 mo.. stuff gets updated.. thats how ubuntu works
[07:01] <Dr_Willis> loafers,  if you wan tthe latest. check the homepage for ubuntu debs.. or the ppa repos.. or source.. or.. (theres proberly some other way)
[07:01] <Scuanor_> hello everybody :o) im having an issue with U Intrepid 8.10 ( im a newbie ). before i login with my password, my screen is set to 1280x1024, i want it though at 1024x768, how can i change that?
[07:02] <durt> !xf86vm
[07:02] <loafers> Dr_Willis, Ok thanks
[07:03] <loafers> Why does ubuntu sometimes update some apps while some like deluge are not?
[07:04] <lstarnes> loafers: most packages are only updated to fix major bugs and patch security vulnerabilities
[07:04] <Kelen> How to show all available machine's IP that they are under a same route?
[07:04] <loafers> lstarnes, ah okay.
[07:04] <Scuanor_> °wonders, why no one of 1300 people can not answer such a surely easy question°
[07:05] <Dr_Willis> Scuanor_,  edit your xorg.conf is one way.. and im not going to walk ya throguh that. :) happy?
[07:05] <Dr_Willis> !fixres | Scuanor_
[07:05] <Dr_Willis> then again.. i have to wonder why the res's are different..  mine are always identical
[07:07] <loafers> Is there any distro that updates as soon as a new version is available rather than waiting 6 months?
[07:07] <Dr_Willis> loafers,  many of them.
[07:07] <Dr_Willis> loafers,  in fact.. proberly most of them
[07:07] <loafers> Dr_Willis, could you list a few :)?
[07:07] <Dr_Willis> loafers,  if you want the most-up-to-dateist of everything.. i would say use gentoo.. and GOOD luck with that.
[07:07] <mew> just a question ,how can i enter the cn channel.????
[07:07] <Dr_Willis> Other then that.. learn to compile from source the few apps you like.
[07:08] <Dr_Willis> !cn
[07:08] <Dr_Willis>  /join  #ubuntu-cn
[07:09] <loafers> Dr_Willis, why don't distros be on the bleeding edge?
[07:09] <mhiku> how to install /etc/squid/sarg.conf ??
[07:10] <Dr_Willis> loafers,  why should they be? theres 100,000+ packages out.. if i come out with bubbaedit 1.0000001 tomorrow.. should everyone be forced to upgrade?
[07:10] <lstarnes> loafers: there are some like that, such as gentoo and arch, but many distributions don't do that because some updates may cause issues with other installed packages
[07:10] <DigitalKiwi> loafers: arch linux
[07:10] <asdf1234> hi...   how do I find out what software I have installed on my ubuntu?   I need to see if I have smbfs or samba (client/server).
[07:10] <loafers> I see.
[07:10] <DigitalKiwi> 01:10 < DigitalKiwi> !archlinux
[07:10] <DigitalKiwi> 01:10 < phrik> Livin' life on the hemmorhaging edge!
[07:11] <DigitalKiwi> I believe bleeding edge is what you wanted?
[07:11] <xeccos> hey guys, where does ubuntu keep the xorg.conf stuff
[07:11] <loafers> DigitalKiwi, I'm checking out archlinux right now.  Thanks for informing me :)
[07:11] <bullgard4> xeccos: Please state your Ubuntu version.
[07:12] <xeccos> 8.10 i believe
[07:12] <xeccos> kubuntu
[07:12] <xeccos> on the livecd btw
[07:13] <xeccos> booted to kubuntu 8.10 amd64
[07:13] <plooo> can yu install 32bit lib packages on your 64bit install?
[07:13] <asdf1234> help anyone?   I need to find out if I installed samba (sudo aptitude install samba)   or smbfs (sudo aptitude install smbfs) ?  How can I do that via command line?
[07:14] <bullgard4> xeccos: 'lsb_release -a' or 'cat /etc/issue'
[07:14] <Scuanor_> Dr_Willis, ah. i guess, i should call me lucky then. thanks.
[07:15] <Bacta> How can I open rar archives that span across multiple files?
[07:15] <xeccos> i'll try that in a sec, has to bot back in ;/
[07:15] <natschil> asdf1234: just type sudo apt-get install samba, and if it tells you you have the newet version installed, you have the newest version
[07:15] <Dr_Willis> Bacta,  i do 'unrar -e whatever.r01' or whatever the first one is called
[07:15] <evilGUI> I'm looking for ways to secure phpmyadmin does anyone know where the config file is located at?
[07:15] <natschil> asdf1234: if you have an xserver running you can just open synaptic and check
[07:16] <lstarnes> evilGUI: /etc/phpmyadmin
[07:16] <sdlwof> how can i install my orginal video driver? i have poor performance. Takes 2-3 seconds to redraw the screen when i move windows. etc.
[07:16] <natschil> evilGUI: you might need to edit apache config files as well
[07:16] <asdf1234> thanks for your help, natschil
[07:16] <evilGUI> natschil: I'm trying to disable root logins via phpmyadmin
[07:16] <natschil> evilGUI: "/etc/apache2"
[07:16] <Bacta> Dr_Willis: It failed
[07:16] <natschil> asdf1234:np
[07:17] <evilGUI> natschil: I'm not using Apache I'm using lighthttpd.
[07:17] <rotkeppchen> hi
[07:18] <natschil> evilGUI: sorry, I have no experience with that, but I'm guessing you would need something like "deny from all" and then "allow from <ip adress>" in its config file
[07:18] <evilGUI> natschil: Alright.
[07:19] <xeccos> bullgard4, ubuntu 8.10 intrepid
[07:20] <Macer> hi
[07:20] <hbbs> Bacta, Use file-roller
[07:20] <Macer> ordered an artigo to put ubuntu on
[07:20] <Macer> http://www.newegg.com/Product/Product.aspx?Item=N82E16833315075 <- got this too
[07:20] <Macer> hope the artigo doesn't suck too badly.. but it's small :)
[07:20] <bullgard4> xeccos: Ok. I cannot help you because I still have Ubuntu 8.04. Sorry.
[07:20] <Macer> REAL small
[07:21] <durt> xeccos: It's in the same spot, /etc/X11/
[07:21] <xeccos> doesn't look like enough information for that tho, durt
[07:21] <durt> xeccos: what do you mean?
[07:22] <xeccos> durt, just those three sections, Device, Monitor, Screen
[07:22] <Bacta> This looks a lot more hopeful hbbs :)
[07:23] <hbbs> Bacta, that it will probably do the trick for you
[07:23] <durt> xeccos: since 8.04 xorg autoconfigs. But still reads xorg.conf if you wish to put something in it.
[07:23] <durt> !xorg.conf | xeccos
[07:24] <xeccos> durt, ahh ok, is there a way to paste that working autoconfig, i'm really just trying to get my gentoo installation to work
[07:24] <xeccos> cute bot name ;]
[07:24] <bullgard4> !sound | bullgard4
[07:25] <durt> xeccos: maybe check /var/log/Xorg.0.log?
[07:25] <Dwade09> trying to get this to work with a max cap of 1mb, 1024 http://intrarts.com/throttledcli.html but when i try to use it i get this output http://pastebin.com/m76dbc03a
[07:29] <FluxD> Hi, I want to delete the gnome panel so I can use awn, When I kill it it comes back up how do I truly kill it?
[07:31] <PossumII> I would like to make a learning packet of applications like openoffice and ubunto for my students. Can I sell this Disk to cover my coss and make a profit..
[07:31] <sdlwof> how do i go back to my old video drivers? windows takes more then 1 second to redraw on the screen when i move them across the desktop, or scroll webpages.
[07:31] <sdlwof> PossumII, that's funny.
[07:31] <kebomix> hello , i have a problem , sometimes when i play videos , my laptop freeze , for example : i run movie and it freeze my laptop , and when i reboot . it work !!! . , !!
[07:32] <PossumII> sdlwof I a computer tutor,, that how I live..
[07:32] <evilGUI> I just removed phpmyadmin is it ok to do sudo rm -r /etc/phpmyadmin ?
[07:33] <flying> d
[07:33] <flying> #ubuntu-cn
[07:34] <flying> ！W: GPG签名验证错误： http://Ubuntu.csie.ntu.edu.tw intrepid Release: 下列签名无效： NODATA 1 NODATA 2
[07:34] <flying> 这样的问题怎么解决！
[07:34] <kebomix> chienese !!!
[07:34] <joot> PossumII, see my pm
[07:37] <flying> #Ununtu-cn
[07:38] <bigbrovar> .
[07:38] <daliang>  flying: 去中文频道吧，老外不懂汉语
[07:40] <Mr_Goodkat> hi
[07:41] <sdlwof> how do i go back to my old video drivers? windows takes more then 1 second to redraw on the screen when i move them across the desktop, or scroll webpages.
[07:41] <Mr_Goodkat> any chance that i can setup scim that it will remember the characters i use most and offers me them at first
[07:41] <Mr_Goodkat> its pretty annoying to scroll always for the right character although they are more common
[07:42] <bigbrovar> sdlwof: are you using a restricted driver?
[07:42] <zacken> packit -sR -d www.microsoft.com -F S -c 5 -W 666 -eR -E f:00:d:f:00:d -p 'HI BILL you Gaylord' -v
[07:43] <sdlwof> bigbrovar, no i am not.
[07:43] <sdlwof> bigbrovar, i tried using dual displays, and now i unhooked the 2nd monitor, rebooted, and now i'm in chaos.
[07:43] <bigbrovar> sdlwof: i was wondering what u meant by "old video driver"
[07:43] <Lacrimas> Hi, i've installed ubuntu in vmware, and i chose host-only mode, because my DC blocks bridging, and i was wondering how i could route a public IP to ubuntu, i've tried editing /etc/network/interfaces, and adding a route /sbin/route add [IP] dev vmnet1 - but now Ubuntu doesn't recognize a connection at all.
[07:44] <titalupshank> aaa
[07:44] <taz> hi all rooomies
[07:44] <bestus> azizah
[07:44] <sdlwof> bigbrovar, the one that worked better? something changed. I can't enable desktop effects. says it's unable to enable.
[07:44] <taz> i need some one help me ???
[07:44] <WillPittenger> I have having some sort of problem getting Virtual Box's guest additions installed onto Ubuntu 8.10.  The package appears to be installed, but VBox doesn't detect the mouse integration is supported and video is limited to 800x600.
[07:44] <databridge> hello, the firefox is too slow on linux / ubuntu also on a fresh install, my system is a 2400+ athlon with 1gig ram
[07:45] <databridge> also on work i use ubuntu and firefox is also slow on comparison with windows
[07:45] <bigbrovar> sdlwof: have you tried check screen resolutions under /systems/preference/screen resolutions
[07:45] <databridge> it stucks on scrolling etc
[07:45] <nsadmin> taz: specific informative concise complete on-topic
[07:45] <sdlwof> bigbrovar, windows draw HORRIBLY slow, even xchat scrolling
[07:45] <taz> i have problems with gtk-recordingmydesktop   it said   gtk-recording is finished  record mydesktop exied with staus 3328 cant not open file for writing
[07:45] <databridge> is there a workaround? also opera and epiphany or seamonkey is also slow
[07:46] <databridge> maybe this is a problem with the gnome desktop?
[07:46] <sdlwof> bigbrovar, i never changed screen resolutions. always been using the same res since the 6.x days
[07:46] <on5sl> mornin', my ubuntu splash is messed up....he only goes left => right => left etc... and that in very weird colors, like in negative or so. After that he doesn't go from left to right but displays only text wit ok's
[07:46] <taz> nsadmin: i have problems with gtk-recordingmydesktop   it said   gtk-recording is finished  record mydesktop exied with staus 3328 cant not open file for writing
[07:47] <bigbrovar> sdlwof: screen resolution does more than it name says .. it can also be used to configure and unconfigure a dual screen setup
[07:47] <taz> how can i fixed it ??
[07:47] <nsadmin> taz: what file and what dir?
[07:47] <sdlwof> bigbrovar, yes. i used it and removed the dual screen setup, rebooted, and now i have poor display performance.
[07:48] <taz> nasdmin: gtk-recordmydesk... i try to record but it not allow me
[07:48] <sdlwof> bigbrovar, the only fix i can think of is to format the drive and reinstall, but, i don't think i need to go such extreme.
[07:48] <red-rum> hi--- I haven't used my computer in a month and the updates don't seem to be working --I get this error: GPG error: http://ppa.launchpad.net intrepid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 60D11217247D1CFFGPG error: http://ppa.launchpad.net intrepid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 7D2C7A23BF81
[07:48] <red-rum> 0CD5GPG error: http://ppa.launchpad.net intrepid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 6AF0E1940624A220Failed to fetch http://ppa.launchpad.net/gscrot/ubuntu/dists/intrepid/main/source/Sources.gz  404 Not Foundç
[07:49] <Bacta> MURDER!
[07:49] <bigbrovar> sdlwof: no dont do that .. yet .. what graphic card are u using
[07:49] <sdlwof> bigbrovar, intel graphics media accelerator 900
[07:50] <sdlwof> bigbrovar, it was totally fine before, shadows, transparencies, compiz effects, all fast and clean and quick. now i can't get it enabled, and seems like 2d display is straight up murder. 2.2ghz too....
[07:50] <quibbler> red-rum: look here: http://ubuntuforums.org/showthread.php?t=1046158
[07:50] <draeath> what's the codename for 8.10? (intrepid?)
[07:50] <Koonunga> greetings.  have suddenly stopped being able to authenticate to my wireless network (128bit passphrase).  Wireless manager repeatedly asks for passphrase without connecting.  This was working and I can connect to neighbours unsecure network (shh!), plus my windows machine connects to my network fine so do not suspect hardware issues etc.  running 8.04 on lenovo R61i. V annoying!
[07:50] <Crazyguy> draeath, yeah
[07:50] <ziroday> dreamnid: yep
[07:50] <draeath> ty
[07:50] <ziroday> draeath: you can see it with lsb_release -a
[07:50] <bigbrovar> sdlwof: ok try this .. put in an ubuntu life cd .. and replace the xorg.conf file with the one in the life cd .. that is what i do most of the time and it always work
[07:51] <sdlwof> think the dual setup changed something in my xconf?
[07:51] <quentusrex_> Does anyone here use virtualization???
[07:51] <taz> nasdmin: ?/
[07:51] <red-rum> quibber --cool, thanks
[07:51] <sdlwof> bigbrovar, wonder if there's the generic live one posted somewhere on the 'net...
[07:51] <taz> brb
[07:51] <bigbrovar>  sdlwof: yeah could be .. -beside that is better than reformating
[07:52] <sdlwof> alright, i'll give it a go, be back with results
[07:52] <draeath> I've got a working xrandr command line, how would I set the same in xorg.conf?
[07:52] <FluxD> Hi, I want to delete the gnome panel so I can use awn, When I kill it it comes back up how do I truly kill it?
[07:52] <draeath> (xrandr --output LVDS --set PANEL_FITTING full_aspect)
[07:53] <bigbrovar> sdlwof: they could be .. but ubuntu auto configure xorg to suit ur machine needs .. that is why a generic xorg config might not fit it
[07:53] <mcstinky> FluxD, http://ubuntuforums.org/showthread.php?t=335067
[07:53] <sdlwof> isn't there a script or program to write another config?
[07:53] <bigbrovar> FluxD: right click and delete?
[07:53] <sdlwof> for xorg?
[07:54] <Harl0t> ubuntu is for skids
[07:54] <Harl0t> sup #skids
[07:54] <mcstinky> sup
[07:54] <Harl0t> nm
[07:54] <Harl0t> u
[07:54] <bigbrovar> sdlwof: ok why not paste bin your xorg.conf
[07:54] <FluxD> bigbrovar, only if there is more than 1 panel, if there is 1 panel that option is grayed out
[07:55] <FluxD> mcstinky, I dont have a current session tab in sessions
[07:55] <Harl0t> anybody here hackin the gibson?
[07:55] <asdf1234> How can I open up the GUI to administer my system that I am accessing remotely?    What command brings that up?
[07:55] <TruthTaco> i need help, i have a partition that shows up in windows but its not showing up in linux
[07:55] <bigbrovar> FluxD: you could hide it?
[07:55] <Harl0t> you dont
[07:55] <Harl0t> skids
[07:56] <sdlwof> yah, i don't have a live cd, lost it, gotta redownload and reburn
[07:56] <Harl0t> owned fah
[07:56] <Harl0t> fag
[07:56] <quibbler> Harl0t: behave yourself
[07:56] <mcstinky> TruthTaco, how is it formatted?
[07:56] <FluxD> bigbrovar, there is abug about how it shows 3 pixels even on autohide :/
[07:56] <lstarnes> Harl0t: this channel isn't for trolling
[07:56] <TruthTaco> NTFS
[07:56] <asdf1234> TruthTaco: you would probably need to mount the HDD that has windows on it in smbfs.
[07:56] <Harl0t> quibbler: die skids scum
[07:56] <mcstinky> do you have ntfs-config installed?
[07:56] <Harl0t> < lstarnes> Harl0t: this channel isn't for trolling
[07:56] <Harl0t> then stop
[07:57] <TruthTaco> whats smbfs
[07:57] <red-rum> quibbler --is there a depository for intrepid?
[07:57] <mcstinky> TruthTaco, samba client
[07:57] <asdf1234> TruthTaco: or rather ntfs-config should do the trick, like mcstinky mentioned.
[07:57] <Harl0t> mcskiddy
[07:57] <mcstinky> =D
[07:57] <natschil> sdlwof: you could try dpkg-reconfigure xorg-server or something like that
[07:57] <TruthTaco> hmmm ill see if i can find that
[07:57] <Harl0t> ill reconfigure ur face
[07:58] <cbruno_> mac or linux?
[07:58] <bigbrovar> FluxD: right click / check show hide buttons / then click the hide button
[07:58] <asdf1234> anyone have an answer for my question??  How can I display my menu bar (with the System, etc menus?) ???
[07:58] <TruthTaco> thanks
[07:58] <sdlwof> or dexconf?
[07:58] <sdlwof> http://pastebin.com/m83ffbc7
[07:58] <edgex-_> hi Harl0t ;)
[07:58] <FluxD> bigbrovar, where?
[07:58] <Harl0t> hi
[07:58] <mib_a95kko77> can u please help me
[07:58] <cbruno_> is os x freebsd?
[07:58] <Harl0t> n e bod-e want 2 meet up for a valentines date?
[07:58] <quibbler> red-rum: yes if you go here in that thread  http://ubuntuforums.org/showpost.php?p=6626736&postcount=34   you can download and run the script
[07:58] <Harl0t> n e bod-e want 2 meet up for a valentines date?
[07:58] <Harl0t> n e bod-e want 2 meet up for a valentines date?
[07:58] <FloodBot1> Harl0t: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[07:59] <soxybyxos> excuse me but where are the channels for trolling
[07:59] <sdlwof> Package `xorg-server' is not installed and no info is available.
[07:59] <sdlwof> Use dpkg --info (= dpkg-deb --info) to examine archive files,
[07:59] <sdlwof> and dpkg --contents (= dpkg-deb --contents) to list their contents.
[07:59] <sdlwof> what's that mean? :P
[07:59] <mib_a95kko77> can u elp with combat arms
[07:59] <FloodBot1> sdlwof: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[07:59] <bullgard4> [Ubuntu-8.04.2] System > Administration > Users and Groups shows the normal login names (accounts) root and <username> and in addition test, testuser und gast. How can I delete the latter 3 correctly?
[07:59] <soxybyxos> i would like to know because this isn't one
[07:59] <mib_a95kko77> COMBAT ARMS HACKS HELP
[07:59] <Harl0t> die anti flood bot
[07:59] <Harl0t> i said like 3 lines
[07:59] <anom01y> anyone know why a certain wine app runs fine in kde but crashes in xfce ?
[07:59] <edgex-_> soxybyxos, #troll
[07:59] <Harl0t> because ur a skid
[07:59] <cbruno_> is freebsd = mac os x?
[07:59] <bigbrovar> sdlwof: sudo dpkg-reconfigure -phigh xserver-xorg
[08:00] <asdf1234> cbruno_: no
[08:00] <anom01y> whenever this particular app opens an image in full screen in xfce the program crashes and I have to kill wine.
[08:00] <bigbrovar> FluxD: right click on the panel
[08:00] <anom01y> in kde, I don't have this problem however
[08:00] <lstarnes> cbruno_: no, although mac os x does borrow some code from freebsd 5
[08:00] <pinkster> Is there a way to browser a tar archive from the terminal without actually untarring it?
[08:00] <TruthTaco> hmm the ntfs config dident work but ill try the samba
[08:00] <Lacrimas> Does anyone know a correct routing configuration?
[08:00] <sdlwof> xserver-xorg postinst warning: overwriting possibly-customised configuration
[08:00] <sdlwof>    file; backup in /etc/X11/xorg.conf.20090214030028
[08:00] <natschil> sdlwof: sudo dpkg-reconfigure xorg
[08:01] <cbruno_> is mac os x like a window manager to freebsd ? Can i make linux look like a mac?
[08:01] <Harl0t> EXCUSE ME BUT WHERE r THE TROLL CHANNELS!?!?!?!?!?!?!?!?!?!?!?!?!?
[08:01] <Harl0t> EXCUSE ME BUT WHERE r THE TROLL CHANNELS!?!?!?!?!?!?!?!?!?!?!?!?!?
[08:01] <sdlwof> natschil, that does nothing....
[08:01] <cbruno_> or should i just go buy a mac
[08:01] <lstarnes> cbruno_: mac os x is not freebsd.  It's a whole separate operating system
[08:01] <sdlwof> natschil, just dumps back to the terminal nothing prints or changes.
[08:01] <quibbler> !ot
[08:01] <Lacrimas> Does anyone know a correct routing configuration?
[08:01] <lstarnes> pinkster: I think mc can browse tarballs
[08:01] <Dr_Willis> lstarnes,  yes it can.. and more. :)
[08:01] <Harl0t> EXCUSE ME BUT WHERE r THE TROLL CHANNELS!?!?!?!?!?!?!?!?!?!?!?!?!?
[08:02] <bullgard4> Harl0t: Stop it.
[08:02] <Harl0t> I WOULD LIKE 2 KNOW MORE ABOUT THIS "TROLLING" OS
[08:02] <lstarnes> !ops | Harl0t
[08:02] <cbruno_> how come linux is free?
[08:02] <Harl0t> !ops | die
[08:02] <Harl0t> !ops | are scum
[08:02] <lstarnes> cbruno_: because the people who made it wanted it to be free
[08:02] <sdlwof> says to install xorg-server, but apt-get install xorg-server says it's not available?
[08:02] <bigbrovar> pinkster: tar lxvf
[08:03] <cbruno_> why do they work for peanuts?
[08:03] <natschil> sdlwof: sorry, try to reconfigure xserver-xorg
[08:03] <lstarnes> sdlwof: try xserver-xorg
[08:03] <pinkster> bigbrovar: thanks
[08:03] <simone> Hi I need help
[08:03] <Harl0t> !ops | die
[08:03] <Harl0t> !ops | lol
[08:03] <Harl0t> !ops | lol
[08:03] <ziroday> cbruno_: some work for nothing, some are paid. Some do it outside of thier job
[08:03] <bigbrovar> sdlwof: sudo dpkg-reconfigure -phigh xserver-xorg
[08:03] <taz> im back... it have prombes with recordmydesktop... it said gtk-recording is finished  recordmydesktpp exited with  :3328description cannot open file  for writing ????  please  help me
[08:04] <cbruno_> should i use gnome or kde?
[08:04] <ziroday> cbruno_: try both, see which one you prefer.
[08:04] <bemuse> Yeah, its basically up to preference
[08:04] <ziroday> !best > cbruno_
[08:04] <simone> I have problems with a Ms Lifecam under Ubuntu Intrepid
[08:05] <sdlwof> bigbrovar, just prings debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable
[08:05] <sdlwof> prints*
[08:05] <cbruno_> ubottu has told me to shut the fuck up...im gone
[08:05] <ziroday> cbruno_: bye
[08:05] <taz> hello anyone can help me ?? with it have prombes with recordmydesktop... it said gtk-recording is finished  recordmydesktpp exited with  :3328description cannot open file  for writing ????  please  help me
[08:05] <Harl0t> that was rude
[08:05] <Harl0t> nazi channel
[08:05] <bigbrovar> sdlwof:sudo rm /var/cache/debconf/config.dat
[08:06] <Harl0t> ok plz stop hackin me
[08:06] <ziroday> !ops | Harl0t
[08:06] <Harl0t> !ops | ziroday
[08:06] <Lacrimas> Can som1 check this for me
[08:06] <Lacrimas> http://pastebin.com/m303ce95d
[08:06] <Lacrimas> Im trying to configure routing, ubuntu doesn't even connect to anything :O
[08:07] <natschil> sdlwof: drop to a comand promt i.e: control+alt+f1 . Then log in , and run "sudo apt-get --purge remove xserver-xorg". after that, run apt-get instal xserver-xorg, and that should reconfigure your xserver
[08:07] <ziroday> Lacrimas: if its a dhcp connection you should be able to do dhcpd eth0 AFAIK
[08:07] <FluxD> Anyone know what happened to current session tab in sessions in intrepid?
[08:07] <Lacrimas> ziroday: it's in vmware, host-only. Im trying to set up another ipv4 address i have
[08:08] <Lacrimas> So its seperate from the main node
[08:08] <ziroday> Lacrimas: ah, not sure about vm's sorry
[08:08] <crdlb> FluxD: gnome-session was rewritten
[08:08] <red-rum> my apologies for not knowing what to do --but what do I do with this #!/bin/bash
[08:08] <red-rum> for i in `cat /etc/apt/sources.list | grep "deb http" | grep ppa.launchpad | grep intrepid | cut -d/ -f4`; do
[08:08] <red-rum> 	wget -q `wget -q https://launchpad.net/~$i/+archive -O- | grep "http://keyserver.ubuntu.com:11371/pks/" | cut -d'"' -f2 ` -O- | grep "pub  " | cut -d'"' -f2 >> keyss
[08:08] <red-rum> done
[08:08] <FloodBot1> red-rum: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[08:08] <red-rum> for j in `cat keyss` ; do
[08:08] <HarlOt> lern 2 ban
[08:08] <HarlOt> retards
[08:08] <sdlwof> wtf is whiptail? i t's eating CPU like a mofo
[08:09] <FluxD> crdlb, how come?
[08:09] <taz> anyone know about recordmydesktop ????
[08:09] <red-rum> what do I do the script (?) that is here --  http://ubuntuforums.org/showpost.php?p=6626736&postcount=34
[08:09] <quibbler> red-rum: are you talking to me?
[08:09] <crdlb> FluxD: because it was old and crufty. the fundamentals of the new gnome-session are very sound, but it's also very half-baked in intrepid
[08:09] <Lacrimas> Im trying to follow this guide: http://help.ovh.co.uk/VMware - Does anyone know what i should have?
[08:09] <thenetduck___> hum....
[08:10] <bigbrovar> sdlwof: any luck?
[08:11] <red-rum> quibbler -- yes... I have to run the script with sudo
[08:11] <red-rum> me dumb
[08:11] <natschil> !info whiptail |sdlwof
[08:11] <FluxD> crdlb, I am trying to stop gnome panel from starting up in sessions, but I dont see an entry, do you where it could be ?
[08:11] <crazz> PLAY BOS WARS ?
[08:11] <natschil> !info whiptail | sdlwof
[08:11] <crdlb> FluxD: hrm, that's a good question
[08:12] <taz> guess no one help..........:(
[08:12] <natschil> sdlwof: did you reconfigure your xserver?
[08:12] <FluxD> taz, what so hard about it?
[08:12] <quibbler> red-rum: when it finishes update again and it should be good
[08:13] <taz> that ok.. guess no one help... guess im waiting
[08:13] <natschil> !info recordmydesktop
[08:13] <taz> i have problmes with  recordmydesktop. it would let me
[08:13] <bigbrovar> FluxD> http://ubuntuforums.org/showthread.php?t=335067
[08:13] <FluxD> taz, what is the question, all you asked was if anyont used it
[08:14] <taz> i did used for few time til it stop..
[08:14] <Myrtti> taz: are you sure you have some space left on your harddrives?
[08:14] <Lacrimas> How do i start my network in ubuntu?
[08:14] <natschil> taz: and your problem is....?
[08:14] <taz> yes
[08:14] <kyledr> i'm getting "disk read error hit ctrl+alt+del to reboot" when grub tries to load windows. any clue?
[08:14] <FluxD> bigbrovar, that doesnt work coz apparently sessions was rewritten
[08:14] <taz> where i can find ??
[08:14] <ky> i think you just need to uninstall windows
[08:14] <ky> it's a virus
[08:15] <Lacrimas> Is there a command i can chuck in terminal to start my network
[08:15] <mneptok> ky: play nicely.
[08:15] <kyledr> i don't have a virus
[08:15] <ky> lol
[08:15] <Dr_Willis> disk read error = could be tgh hd is going bad or is bad.
[08:15] <bigbrovar> Lacrimas> sudo /etc/init.d/networking start
[08:15] <Dr_Willis> or a missconfitgurd grub trying to read the wrong place
[08:15] <nsadmin> lucky you :)
[08:15] <greaser> where do i get apt repositories? im trying to install pureftps
[08:15] <kyledr> well linux is on the same drive
[08:15] <Lacrimas> Thanks bigbrovar
[08:15] <natschil> taz: if you want to install recordmydesktop, open synaptic, find recordmydesktop and install it. Note: you need to have the universe repo enabled, which you probably have.
[08:15] <ziroday> kyledr: can you access the windows partition in ubuntu?
[08:15] <kyledr> it could be misconfigured, but i don't know
[08:15] <mneptok> Lacrimas: Intrepid?
[08:15] <kyledr> yes
[08:16] <juan__> wazup
[08:16] <juan__> to everyone
[08:16] <kyledr> grub configuration is way different since last i saw
[08:16] <ky> greaser: you can just open synaptics package manager, via the gui
[08:16] <Lacrimas> 8.1 which i hope is intrepid :D
[08:16] <kyledr> i can't compare the windows one to the ubuntu one because the ubuntu one is gibberish
[08:16] <ziroday> kyledr: can you pastebin the output of sudo fdisk -l and cat /etc/grub/menu.list
[08:16] <Lacrimas> Only installed this morning
[08:16] <red-rum> quibbler --do I need to reboot for it to come into effect?
[08:16] <taz> how ?
[08:16] <greaser> i tried to find the package but it wasnt there
[08:16] <bigbrovar> FluxD>: have you tried another DE?
[08:16] <ziroday> kyledr: er cat /boot/grub/menu.lst
[08:16] <ky> greaser: try connecting to a different server
[08:16] <Myrtti> taz: if you could open a terminal window for me, type "df -h" without quotes and paste the result to a pastebin service like http://paste.ubuntu.com , we could check that recordmydesktop isn't giving you an error because your harddrives are full
[08:16] <mneptok> Lacrimas: that it is. on Intrepid you should use "sudo service networking restart"
[08:16] <sdlwof> bigbrovar, i got it back!!!
[08:16] <greaser> ahhhh
[08:16] <quibbler> red-rum: just update and it should be good
[08:16] <greaser> i see
[08:17] <Lacrimas> ok
[08:17] <taz> ok
[08:17] <greaser> nice let me try, thanks
[08:17] <sdlwof> but i've lost gdm, when i log out it just dumps to the terminal....
[08:17] <FluxD> bigbrovar, I just want awn to be the default taskbar
[08:17] <mneptok> Lacrimas: the other will work, but is deprecated.
[08:17] <crdlb> FluxD: found it, in gconf of course :)
[08:17] <kyledr> ziroday: http://pastebin.com/f1cd93415 and http://pastebin.com/f7e76f2dc
[08:17] <FluxD> crdlb, ah lol nice
[08:17] <calle> Does anybody know how to read/send SMS messages with a UMTS/3G connection stick or internal modem? Data connections work fine.
[08:17] <bigbrovar> sdlwof> hmmm what did you do to get it back?
[08:17] <tangentcollision> I need to get a user authorized to use x, when I startx it doesn't actually let me start with error : X: user not authorized to run the X server, aborting.
[08:17] <sdlwof> removed xserver-xorg and reinstaleld.
[08:18] <crdlb> FluxD: gconf-editor /desktop/gnome/session (remove panel from required_components list)
[08:18] <ky> man apt-get
[08:18] <sdlwof> but i don't have gdm, i need to do startx, and bypasses gdm. so once it running, i go to log out and it just dumps back to the system console
[08:18] <ziroday> kyledr: well that looks correct
[08:18] <bigbrovar> sdlwof>: try sudo aptitude install ubuntu-desktop
[08:18] <FluxD> thanks a lot crdlb
[08:18] <kyledr> ziroday: i thought i had this problem before and fixed it by modifying the menu.lst, but maybe i messed it up
[08:19] <taz> myrtti.. plase go private thanks
[08:19] <Myrtti> taz: I don't do help in pm
[08:19] <ziroday> kyledr: sorry, there goes my idea
[08:19] <taz> ok here
[08:19] <sdlwof> isn't sudo standard? :)
 taz: if you could open a terminal window for me, type "df -h" without quotes and paste the result to a pastebin service like http://paste.ubuntu.com , we could check that recordmydesktop isn't giving you an error because your harddrives are full
[08:19] <taz> wait sec
[08:19] <crdlb> FluxD: don't thank me, thank google; I'd never have figured that out on my own :)
[08:19] <Myrtti> tangentcollision: sudo /etc/init.d/gdm restart
[08:19] <bigbrovar> sdlwof> you could also try sudo /etc/init.d/gdm start
[08:20] <FluxD> crdlb, okay google it is then :)
[08:20] <Lacrimas> Ignoring unknown interface eth0=eth0.
[08:20] <taz> myritti:    Filesystem            Size  Used Avail Use% Mounted on
[08:20] <taz> /dev/sda5              29G  3.9G   23G  15% /
[08:20] <taz> tmpfs                 1.5G     0  1.5G   0% /lib/init/rw
[08:20] <taz> varrun                1.5G  220K  1.5G   1% /var/run
[08:20] <taz> varlock               1.5G     0  1.5G   0% /var/lock
[08:20] <FloodBot1> taz: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[08:20] <taz> udev                  1.5G  2.7M  1.5G   1% /dev
[08:20] <kyledr> well the disk has to be ok since i can access it through linux
[08:20] <tangentcollision> Myrtti: is the restart necessary?
[08:20] <Myrtti> taz: I requested you to use http://paste.ubuntu.com so you wouldn't flood the channel
[08:21] <Myrtti> tangentcollision: restart doesn't hurt, it's just a safety measure to make sure the gdm you have is already shut down
[08:21] <tangentcollision> wait, Myrtti how would that solve my problem?
[08:21] <bigbrovar> taz> run the program from terminal and pastebin what output you see
[08:21] <Lacrimas> mneptok: i get an error- Ignoring unknown interface eth0=eth0.
[08:22] <taz> sorry i not understand
[08:22] <Myrtti> tangentcollision: because if *you* type in startx, *you* wont have the permissions to run X
[08:22] <tangentcollision> I see?
[08:22] <tangentcollision> if I start x as root though in screen, would that be okay as well?
[08:22] <Myrtti> tangentcollision: take the stuff you wanted to paste to me, go to paste.ubuntu.com, paste that stuff there and give me the url
[08:22] <mneptok> Lacrimas: this machine has successfully connected previously?
[08:23] <Lacrimas> It did, but im routing so it has its own IP
[08:23] <tangentcollision> hehe, tab error
[08:23] <Lacrimas> New error though mneptok
[08:23] <taz> bigbrovar: sorry i do not understand??
[08:23] <mneptok> Lacrimas: meaning you have added static routes?
[08:23] <Lacrimas> Yes
[08:23] <kyledr> anyone know why i would get a disk read error when trying to load windows but not when loading linux?
[08:23] <Lacrimas> Following this guide http://help.ovh.co.uk/VMware
[08:23] <taz> myrtti: i  did using http://paste.ubuntu.com
[08:23] <mneptok> Lacrimas: sudo invoke-rc.d networking restart
[08:23] <Myrtti> tangentcollision: sure, but starting gdm makes all the little pieces go into correct places so that you've got them there if/when you want to log out/shut down the computer
[08:24] <juan__> okay
[08:24] <Myrtti> tangentcollision: and where's the url to the paste?
[08:24] <Myrtti> tangentcollision: sorry
[08:24] <Myrtti> taz: and where's the url to the paste?
[08:24] <juan__> it is safe to download the nvidia drivers from nvidia website or just stay with 177
[08:24] <tangentcollision> Myrtti: mainly I'm trying to forward x through ssh
[08:24] <Lacrimas> mneptok: /bin/sh: /sbinc/ip: not found
[08:24] <Lacrimas> Failed to bring up eth0
[08:24] <taz> paste.ubuntu.com that what u said...
[08:25] <quibbler> juan__: 177 working for you?
[08:25] <mneptok> Lacrimas: echo $SHELL
[08:25] <taz> so terrminal... it what said  Filesystem            Size  Used Avail Use% Mounted on
[08:25] <taz> /dev/sda5              29G  3.9G   23G  15% /
[08:25] <taz> tmpfs                 1.5G     0  1.5G   0% /lib/init/rw
[08:25] <taz> varrun                1.5G  220K  1.5G   1% /var/run
[08:25] <taz> varlock               1.5G     0  1.5G   0% /var/lock
[08:25] <FloodBot1> taz: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[08:25] <taz> udev                  1.5G  2.7M  1.5G   1% /dev
[08:25] <tangentcollision> taz: you fool
[08:25] <taz> sorry
[08:25] <tangentcollision> please go to paste.ubuntu.com and paste it there
[08:25] <Lacrimas> mneptok: /bin/bash
[08:26] <mneptok> Lacrimas: that's good news, the networking is not
[08:26] <mneptok> Lacrimas: pastebin /etc/network/interfaces
[08:26] <Myrtti> taz: you get a URL that's new and has numbers and letters *after* the paste.ubuntu.com
[08:26] <Myrtti> taz: I need that whole URL
[08:27] <taz> ok
[08:27] <Lacrimas> mneptok: i think i found an error in it, /sbinc/ip instead of /sbin/ looks like it reconfigured properly
[08:27] <taz> url ?
[08:27] <Myrtti> taz: the address on the address bar
[08:28] <bigbrovar> taz>  open terminal , copy and paste this command in it gtk-recordMyDesktop , then press enter .. it would start gtk record .. noe try doing the recording again .. when it gets to the part where it crashes .. the terminal window which should still be opened would throw up some output .. now copy and paste does output to www.pastebin.com / click the submit button and paste the url/link it gives u here
[08:28] <Myrtti> bigbrovar: thank you
[08:29] <taz> ok
[08:29] <Myrtti> ubottu: tell endeavormac|afk about away
[08:30] <Lacrimas> mneptok: http://pastebin.com/m25002034
[08:30] <endeavormac|afk> whoops
[08:33] <red-rum> I can't update two other packages: tp://ppa.launchpad.net/gscrot/ubuntu/dists/intrepid/main/binary-i386/Packages.gz  404 Not Foundç
[08:33] <red-rum> and ... Failed to fetch http://ppa.launchpad.net/gscrot/ubuntu/dists/intrepid/main/source/Sources.gz  404 Not Found
[08:34] <mneptok> Lacrimas: you're missing some key info - http://pastebin.com/d5c01df6f
[08:34] <mneptok> Lacrimas: i also put 2 examples of correct syntax for the "route" command you're calling
[08:35] <mneptok> Lacrimas: only you can know what those values should be
[08:35] <Lacrimas> ok
[08:35] <Lacrimas> Thanks mneptok i'll give it a try
[08:35] <taz> bigbrovar: already paste into www.pastebin.om
[08:36] <dogmagitron> ubuntu is awesome
[08:36] <Bacta> Ubuntu got me laid
[08:36] <bigbrovar> taz> good now i need the link .. copy the url on the address bar
[08:36] <quibbler> red-rum: look here: http://gscrot.ubuntu-projekte.de/
[08:36] <taz> which one ??
[08:36] <Lacrimas> mneptok: would my gateway be 10.1.1.1 or 192.168.0.1 for example
[08:36] <taz> top or bottom?
[08:36] <chu_> I'm very attached to my ubuntu install :)
[08:36] <bigbrovar> taz> btw the program ram fine here when i tried it
[08:36] <Bacta> Ubuntu grew my epenix by nine inches!
[08:37] <pop79> hello people!
[08:37] <bigbrovar> taz: top
[08:37] <taz> bigbrovar: ok
[08:37] <chu_> only 9? are you doing something wrong?
[08:37] <taz> ok i copy it then can i paste this ??
[08:37] <dogmagitron> Bacta: what is an epenix?
[08:37] <ajrion> hey i have ubuntu 8.04 but i wanted xfce to add, now when i added xfce i dont have a start bar.. how do i get the entire default workspace of XFCE please?
[08:38] <dogmagitron> sudo apt-get install xubuntu-desktop
[08:38] <Bacta> The thing you use to get root access to eginas
[08:38] <chu_> Gibson's too.
[08:38] <ajrion> dogmagitron: thanx
[08:38] <taz> bigbrovar: ready paste this ??
[08:38] <dogmagitron> Bacta: ? eginas is that in the repositories?
[08:38] <aaditya> A SQL query walks into a bar and sees two tables. He walks up to them and says 'Can I join you?'
[08:38] <bigbrovar> taz>: yeah copy and paste the address paste gives you
[08:38] <niko7865> no this site is much better
[08:38] <dogmagitron> ajrion: no problem then logout then log back in
[08:38] <taz> bigbrover:    1.
[08:38] <taz>       gtk- recordingmydestop
[08:38] <taz>    2.
[08:38] <taz>        
[08:38] <taz>    3.
[08:38] <FloodBot1> taz: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[08:38] <niko7865> run by a guy from xkcd
[08:38] <taz>       Size  Used Avail Use% Mounted on
[08:39] <niko7865> damnit, wrong chat
[08:39] <Lacrimas> mneptok: Im a little confused as to what to put in network
[08:39] <chu_> Whoops
[08:39] <bigbrovar> taz> noo you are doing it wrongly
[08:39] <mneptok> Lacrimas: usually .255 on your subnet
[08:39] <red-rum> quibbler --thanks
[08:39] <zacken> best noob ever see
[08:40] <chu_> I hope he rejoins.
[08:40] <ajrion> dogmeat: why isnt this default when one uses the GUI packet mannager for installing xfce?
[08:40] <mneptok> chu_: never left
[08:40] <FluxD> crdlb how do u delete the key in it? I dont see a remove key option
[08:40] <mneptok> taz: do NOT paste to the channel
[08:41] <mneptok> taz: do NOT do it. as in NEGATIVE.
[08:41] <bigbrovar> taz> listen .. when you post the out from terminal on pastebin .. and click sumit .. if you check the  of your webbrowser you would see a link there .. its the link that you see that you should post here
[08:41] <Bacta> Don't
[08:41] <Bacta> Paste
[08:41] <Bacta> In
[08:41] <Bacta> Channel
[08:41] <Bacta> Taz
[08:41] <FloodBot1> Bacta: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[08:41] <taz> ok im try my best...
[08:41] <Lacrimas> mneptok: SIOCDELRT: No such process RTNETLINK answers: File exists. Failed to bring up eth0
[08:41] <greaser> i have 2 nic cards in my pc, one lan and one wan. how can i set it so the devices on my lan can use the internet on my wan?
[08:42] <chu_> is it possible to remove the window selector (i.e. open applications) in awn?
[08:42] <nsadmin> greaser: are the interfaces set up? if so, apt-get install ipmasq
[08:42] <mneptok> Lacrimas: comment out the post like
[08:42] <mneptok> *line
[08:42] <bigbrovar> taz: the link would be on the address bar .. once you sumbit the address bar would change from www.pastebin.com to something like www.pastebin.com/hccry
[08:43] <taz> i check in terminal.. it said  command not found
[08:43] <greaser> well one is, its connecting to the internet and all, the other one is to my xbox. it doesnt seem to be routing well
[08:43] <nsadmin> can the xbox ping the box with the 2 nics?
[08:44] <greaser> im trying but it doesnt seem to be picking it up
[08:44] <Lacrimas> mneptok: SIOCDELRT error only this time
[08:44] <greaser> on my pc it just keeps trying to grab an ip
[08:45] <Lacrimas> mneptok: My bad, SIOCADDRT
[08:46] <mneptok> Lacrimas: you did not put in the 2 route command examples, right?
[08:46] <Lacrimas> Nope
[08:46] <Lacrimas> last line is the commented out post-up line
[08:46] <mneptok> Lacrimas: do you have a GUI installed?
[08:46] <Lacrimas> Yes
[08:47] <mneptok> Lacrimas: comment out anything related to eth0, restart networking, see if NetworkManager gets you a connection
[08:48] <Lacrimas> mneptok: ifup: couldn't read interfaces file "/etc/network/interfaces"
[08:48] <bigbrovar> taz> ok you have a problem with gtkrecord right? it keep crashing and throwing up some errors .. right? .. now the best way to get what the problem is . is to running the program in a terminal and to do this you have to copy and paste this command in a terminal gtk-recordMyDesktop  , press enter , this would launch gtkrecord .. now try doing the recording ,, the one that makes it crash.. when it crashes .. you should see some messages in the terminal t
[08:48] <bigbrovar> hat you used to launch it .. now copy and paste does messeges to www.pastebin.com .. click sumbit .. it would give you a link .. which would be on in the address field of your web browser ... copy and paste that link here
[08:48] <FloodBot1> bigbrovar: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[08:48] <tangentcollision> okay, more to the point here, how do I make x forward to xming?
[08:48] <mneptok> Lacrimas: ls -l /etc/network/interfaces
[08:49] <taz> bigrovar: yes..
[08:49] <surjeet> how to install dreamweaver
[08:49] <tangentcollision> surjeet: winehq.org
[08:49] <nsadmin> greaser can you see the IP your xbox got?
[08:49] <Lacrimas> mneptok: chmods root root 168 2009-02-14 04:48 /etc/network/interfaces is all that comes up
[08:50] <greaser> it doesnt pick it up
[08:50] <surjeet> i have installed wine but dreamweaver is not ableble there
[08:50] <spsneo> how to setup a local ubuntu repository mirror on a fedora machine?
[08:50] <greaser> xbox just times out
[08:50] <mneptok> Lacrimas: sudo chmod 644 /etc/network/interfaces
[08:51] <quibbler> surjeet: ask in #winehq
[08:51] <nsadmin> greaser: maybe you don't have a dhcp server on the debian box
[08:51] <typeliviu> hello
[08:51] <spsneo> pleae help: how to setup a local ubuntu repository mirror on a fedora machine?
[08:51] <typeliviu> i need a massenger for ubuntu (yahoo
[08:51] <Lacrimas> mneptok: Done, but file still isn't able to be read
[08:51] <greaser> ahhh
[08:51] <Milkeh> is there a way to have kernal stuck to the desktop?
[08:52] <greaser> its a fresh install
[08:52] <typeliviu> what massenger do u recommand me
[08:52] <greaser> so im thinking no
[08:52] <mneptok> Lacrimas: http://pastebin.com/m123d9316
[08:52] <typeliviu> i use yahoo..i need voice, web and file transfer
[08:52] <mneptok> Lacrimas: use that as /etc/network.interfaces
[08:52] <nsadmin> greaser: ok... could you pastebin your /etc/network/interfaces?
[08:52] <mneptok> s/./\//
[08:52] <joot> spsneo. they are different packages fedora uses rpm and ubuntu deb type
[08:53] <DoomsDave> is anyone here familiar with pan? the usenet client...
[08:53] <taz> bigbrovar: is other way can fix ??
[08:53] <jim_p> how can i make konqueror to auto-add www. and .com when i hit ctrl and enter?
[08:53] <bigbrovar> typeliviu> try  kopete  ot emphaty or gyache .. or write yahoo and tell em to make a msg client for linux (good luck with that)
[08:53] <quibbler> !pidgin | typeliviu
[08:53] <typeliviu> ok thx
[08:54] <sky_> olla
[08:54] <Lacrimas> mneptok: Ignoring unknown interface eth0=eth0.
[08:54] <bigbrovar> taz> i cant really help you when i dont know what the problem is ..
[08:54] <mneptok> Lacrimas: and NetworkManager?
[08:54] <spsneo> joot: actually I want to host a local repository for ubuntu , but the server on which I want to host is a fedora machine. what to do?
[08:54] <sky_> anyone...is hard to manipulate with GRUB ? i mean changin background etc ?
[08:54] <taz> allrigh thank you.... will do format....
[08:54] <bigbrovar> taz> if you can explain what the error is i could try .. beside i ran the problem here .. recorded my desktop and it was fine
[08:55] <greaser> nsadmin: http://pastebin.com/d18378e3f
[08:55] <greaser> thats it
[08:55] <mneptok> Lacrimas: must sleep
[08:55] <nsadmin> ok
[08:55] <sky_> anyone ? :)
[08:55] <jim_p> does kopete do irc?
[08:55] <jim_p> sky_, no
[08:55] <Lacrimas> ah ok mneptok
[08:55] <nsadmin> whoa... you don't have any netowrking
[08:55] <bigbrovar> taz> u mean format the system ? no dont do that
[08:55] <nsadmin> this is on which box?
[08:55] <sky_> and guide please ? :D
[08:55] <DoomsDave> i have this problem with pan. i have firefox set to open nzb files in pan when i download one. if i just have one nzb file it works fine, but if i try to open a second file, it opens up a new task list instead of appending the new files to the end of the existing list. also it creates duplicate entries for everything on the first list to the second one
[08:56] <adhi> cp?
[08:56] <taz> bigbrovar:  yes.. why ??
[08:56] <joot> spsneo. Sorry I truely do not know My guess is that you could host them but why not just point to the repos??
[08:56] <jim_p> sky_, can i pm you how i did it?? if its only the background, its easy
[08:56] <greaser> thats this box im on right now
[08:56] <bigbrovar> taz> tell me what the problem is so we can sort it out ... u dont have to format your system over that .. we can even look for alternatives
[08:56] <quibbler> sky_: you can install startup manager in synaptic  and then can change different things in grub
[08:57] <sky_> jim_p: sure
[08:57] <taz> bigbrovar:  it was before recoreded fine now   now i cant start record.... it said gtk- recording is finished record mydestop status :3328 descrition cant not open file for writing
[08:59] <bemuse> Hi, i need to execute some .reg files in order to access a server, how do you suppose to go about doing this.
[08:59] <Guest76863> hello
[08:59] <DoomsDave> that sounds kind of dubious
[09:00] <bigbrovar> taz> try killall gtk-recordMyDesktop
[09:00] <taz> bigrovar: ok
[09:00] <crdlb> FluxD: don't delete the key, remove the entry from the list
[09:00] <DoomsDave> bemuse: are you talking about windows registry files? if so open them up in a text editor and see what entry it wants to make
[09:01] <FluxD> crdlb, what entry ? panel ?
[09:01] <sky_> quibbler: i dont have startup manager in Synaptic :-O
[09:01] <crdlb> FluxD: yes
[09:01] <FluxD> crdlb, how? I dont see an option or do I make it empty ?
[09:01] <taz> bigbrovar:  it said no process killed
[09:01] <surjeet> how to install dreamweaver please give me cammand help
[09:02] <nsadmin> greaser let's give that box a name
[09:02] <crdlb> FluxD: double-click, select panel, remove, OK
[09:02] <greaser> ok
[09:02] <bigbrovar> taz: ok try this       rm $HOME/.gtk-recordmydesktop
[09:02] <nsadmin> greaser: you already named it?
[09:02] <taz> bigbrovar: ok
[09:02] <Triad> Woo, it worked.
[09:02] <did> hai
[09:02] <gcs> Hi all!
[09:02] <nsadmin> wai?
[09:02] <greaser> uhmm
[09:03] <bigbrovar> taz: it would remove the gtk record config file from your system more like resetting the progra,
[09:03] <Triad> Is here where I'd ask for help with Ubuntu?
[09:03] <greaser> not sure where to go for that
[09:03] <greaser> haha
[09:03] <gcs> I would like to create an encrypted partition.
[09:03] <surjeet> how to install dreamweaver please give me cammand help
[09:03] <quibbler> sky_: i have 8.04 and it is in synaptic...maybe it no longer is in 8.10
[09:03] <gcs> As I see there are options like LUKS and DM_crypt.
[09:03] <nsadmin> greaser: what's in that box's /etc/hostname?
[09:03] <bemuse> DoomsDave, http://pastebin.com/f77fc187c
[09:03] <gcs> But which one is better?
[09:03] <nsadmin> butter
[09:03] <sky_> quibbler: i downloaded it via console...i hate synaptic :D
[09:03] <gcs> More supported or failsafe?
[09:04] <taz> bigbrovar: it said rm:cannot remove    no such file or directory
[09:04] <did> i am from malisie
[09:04] <greaser> greaser-desktop
[09:04] <WillPittenger> I have having some sort of problem getting Virtual Box's guest additions installed onto Ubuntu 8.10.  The package appears to be installed, but VBox doesn't detect the mouse integration is supported and video is limited to 800x600.
[09:04] <Triad> I've tried installing Ubuntu, and have in fact succeeded, but I can't get it to load all the way.
[09:04] <typeliviu> how install kopete
[09:04] <nsadmin> greaser: ok, and greaser-desktop has two nics?
[09:04] <greaser> yes
[09:04] <bemuse> DoomsDave, I have wine currently installed, should i just go and change the file manually, instead of trying to run it as i would on windows?
[09:05] <bullgard4> [Ubuntu-8.04.2] System > Administration > Users and Groups shows the normal login names (accounts) root and <username> and in addition test, testuser und gast. How can I delete the latter 3 correctly?
[09:05] <nsadmin> if you run ifconfig
[09:05] <nsadmin> how many paragraphs?
[09:05] <greaser> 3 paragraphs
[09:05] <nsadmin> hmm
[09:05] <Guest76863> typeliviu: sudo apt-get install kopete
[09:05] <DoomsDave> im not familiar with wine but if it has regedit or a functional replacement then you can look in the reg file and see what keys it wants to modify and then do it yourself
[09:05] <WillPittenger> No one has time for me?
[09:05] <greaser> eth0 eth1 and lo
[09:06] <nsadmin> there are only entries for lo in /etc/network/interfaces
[09:06] <FluxD> crdlb, double click required_components ?
[09:06] <surjeet> how to install dreamweaver please give me cammand help
[09:06] <greaser> ahhhh
[09:06] <nsadmin> greaser: how did you set up eth0 and eth1?
[09:06] <quibbler> surjeet: ask in #winehq
[09:07] <greaser> i havent touched them, ubuntu i guess set them up automatically
[09:07] <crdlb> FluxD: ah, you're looking at the wrong thing, don't go into the required_components folder
[09:07] <FluxD> crdlb, ah I found it thanks
[09:07] <crdlb> FluxD: there's a string list key called required_components_list inside of /desktop/gnome/session
[09:07] <bigbrovar> taz> ok open your home directory ... press ctrl + h (which would show you hidden files) now look for a file called .gtk-recordmydesktop (with a dot infront) delete the file and run the program again
[09:07] <nsadmin> ok... to anyone: how is ubuntu setting up interfaces (and why is it not recording that setup in /etc/network/interfaces)
[09:08] <kamalove> Hi!!
[09:08] <nsadmin> but meanwhile...
[09:08] <nsadmin> greaser could you pastebin the output of route -n
[09:08] <kamalove> your in the Newyork?
[09:09] <TriadDraykin> I'm back, I think.
[09:09] <nsadmin> brb
[09:09] <bigbrovar> taz> if that still doesnt work then try istanbul its can be installed from synaptic and its quite good too
[09:09] <WillPittenger> Help!
[09:09] <greaser> http://pastebin.com/d36266ed3
[09:09] <greaser> thats what i get
[09:10] <TriadDraykin> I have a very poor connection. If this isn't the place to find help with installing or running Ubunutu 8.10, could someone kindly point me in the direction of where I  might get such assistance?
[09:10] <quibbler> !ask | TriadDraykin
[09:11] <doc`> ok i have two connections, one wireless and one wired, can i use them as one (ubuntu 8.10)
[09:11] <nsadmin> so eth1 is your outgoing interface; it doesn't look like eth0 has anything in the routing table
[09:11] <DoomsDave> doc`,  what do you mean by use them as one?
[09:11] <doc`> well kind of combine them so i get better speed
[09:11] <taz> bigvrovar:  i can see it some of them . it said gtk-recordmydestktop crash.log and .gtk-recordmydesktop     do u want me deteled it both ??
[09:12] <doc`> im not sure its possible
[09:12] <taz> bigbvrovar:  .gtk-bookmarks too
[09:12] <doc`> and if one works bad i have the other as backup
[09:12] <greaser> eth1 is wan and eth0 is lan, thats how i have them connected
[09:12] <TriadDraykin> Understood. I have Ubuntu 8.10 installed, and when I try to load it from boot, it freezes shortly after the back-and-forth on the loading bar stops, and it begins moving left-to-right
[09:12] <DoomsDave> there's probably some kind of load balancing thing you could do. are they connected to two different internet connections?
[09:12] <bigbrovar> taz> nooo leave the .gtk-bookmarkv
[09:13] <doc`> yes i think so
[09:13] <jim_p> how do i stop the nm service from running?
[09:13] <nsadmin> greaser could you pastebin output of ifconfig
[09:13] <doc`> not entierly sure tho
[09:13] <nsadmin> jim_p: osm
[09:13] <nsadmin> err
[09:13] <bigbrovar> taz>  can you email me the crach log bigbrovar at gmail dot com
[09:13] <DoomsDave> doc`,  if they're both ultimately connected to the same internet connection like your cable or dsl or whatever, then you arent going to pick up any speed
[09:13] <nsadmin> jim_p: isn't nm have to do with samba?
[09:13] <greaser> http://pastebin.com/de763ed9
[09:13] <surjeet> how to install dreamweaver please give me cammand help
[09:14] <doc`> both are school networks
[09:14] <pop79> hey guys, sometimes this weird thing happens to the loading bar. Bits of it goes all over the screen. It happened on an AMD64 system i was fixing
[09:14] <jim_p> nsadmin, nm = network manager
[09:14] <doc`> but i think it should be different
[09:14] <bigbrovar> taz> i meant email be the crashlog
[09:14] <joot> crach log???
[09:14] <doc`> one is capped at 10 mbit, the other at 20 mbit
[09:14] <taz> bigbrovar: i will email u my email is cooltaz1020 it will send it to u ok
[09:14] <bigbrovar> k
[09:14] <carpii> surjeet, run it under wine
[09:15] <savvas> joot: a "text" file, such as /var/crash/something.crash :)
[09:15] <nsadmin> greaser you have an ipv6 address on eth0
[09:16] <taz> bigbrovar: send email
[09:16] <Eliwood> eh
[09:17] <Eliwood> anyone can tell me how to change the keyboard layout?
[09:17] <greaser> hmm
[09:17] <greaser> let me see the settings on that
[09:17] <delly> hi
[09:17] <Eliwood> mine is currently on UK
[09:17] <bigbrovar> taz> k ... did it work after deleting the files i said ?
[09:17] <Eliwood> cos my \ key is < in US keyboard
[09:17] <kaduk> Hi
[09:17] <delly> how to install dreamweaver
[09:18] <joot> savvas, thank you
[09:18] <kaduk> Can someone pls check if libxcb-xlib0 is installable on Ubuntu ?
[09:18] <kaduk> albo with libxcb1
[09:18] <greaser> yea in network tools it says IPv6
[09:18] <greaser> wonder how that got there
[09:18] <kaduk> along
[09:18] <nsadmin> do you have ipv6 routers?
[09:18] <nsadmin> inside the lan that is
[09:19] <greaser> no, no routers. straight connections from my box to modem  and box to xbox360
[09:19] <spsneo> pleae help: how to setup a local ubuntu repository mirror on a fedora machine?
[09:19] <nsadmin> so you don't have a hub or switch for the lan?
[09:20] <delly> how to install dreamweaver
[09:20] <greaser> nothing, straight connections
[09:20] <ajrion> i hhave ubuntu 8.04 and i did sudo apt-get install xubuntu-desktop and i STILL dont have a start bar in xfce please help
[09:20] <nsadmin> you'd need a crossover cable for that I think
[09:20] <nsadmin> from the box to the xbox
[09:20] <delly> how to install dreamweaver
[09:21] <greaser> hmm, it was fin in windows
[09:21] <greaser> but perhaps a crossover cable might work
[09:21] <nsadmin> oh, so it worked?
[09:21] <greaser> yea
[09:21] <delly> how to install dreamweaver please help me
[09:21] <nsadmin> hmm
[09:21] <greaser> it works in windows
[09:21] <JackWinter_> how do i see what path my system is using for finding libs ?
[09:21] <carpii> delly, stop repeating
[09:21] <delly> ok
[09:21] <carpii> go and google for gods sake, i found it in 3 seconds
[09:21] <Triad> There, hoping this client will work better.
[09:22] <Eliwood> anyone can tell me how to modify the keyboard layout?
[09:22] <greaser> what if i delete eth0
[09:22] <greaser> then reboot and have it load again with the xbox on?
[09:22] <test> delly you can use dreamwaver alt in ubuntu
[09:22] <nsadmin> you wouldn't need to reboot
[09:22] <Eliwood> as in when pressing shift 3 gets me the hex key rather than the pound key?
[09:22] <nsadmin> windows is dumb that way, but not linux :)
[09:22] <delly> what is mean of ubuntu
[09:22] <greaser> ahhh
[09:22] <greaser> good stuff
[09:22] <greaser> haha
[09:23] <test> delly you can use Quanta
[09:23] <Triad> I can't get Ubuntu to load past a certain point. Is there a way to test if my computer won't run it?
[09:23] <test> Or  NVU
[09:23] <Eliwood> anyone?
[09:23] <delly> what is use of quanta
[09:23] <joot> Triad, how much ram do you have
[09:23] <test> you can use NVU its my favorite one
[09:23] <nsadmin> greaser: but you could try editing eth0 to give it an ipv4 addr... howbout 192.168.1.1
[09:24] <elky> quanta+ is a more advanced development platform, but nvu/kompozer is sufficient for anyone coming from dreamweaver
[09:25] <greaser> 255.255.255.0?
[09:25] <jim_p> how do i stop the nm service from running?
[09:25] <nsadmin> yeah
[09:25] <delly> test plz give me reply
[09:25] <nsadmin> (aka "/24")
[09:25] <joot> Triad, how much ram do you have
[09:25] <ajrion> petrovicivan: ej desi covece
[09:25] <nsadmin> !test
[09:25] <greaser> ok let me run the xbox
[09:25] <ajrion> i hhave ubuntu 8.04 and i did sudo apt-get install xubuntu-desktop and i STILL dont have a start bar in xfce please help
[09:26] <test> ok
[09:26] <Triad_> I have 1GB, DDR
[09:26] <test> hold on
[09:26] <joot> Triad, OK it is not the problem I thought of
[09:26] <test> the software can be found in synatic
[09:26] <nsadmin> greaser: for now give the xbox a static address of 192.168.1.2 (same mask)
[09:27] <winema> Anyone able to tell me if it's possible to run ubuntu on vmware and have it access the C: drive on main host so it's able to partition it and install ubuntu? without overwriting windows vista
[09:27] <test> its working as dreamwaver as you requested
[09:27] <Triad_> Ran a memory test, and I've installed successfully off the disk on a nother computer.
[09:27] <delly> test plz tell me how to install dreamweaver
[09:27] <Lacrimas> Anyone know if VMWare works alongside proxmox?
[09:27] <thrope> hi - i am trying to add a user but all the buttons are greyed out (including unlock etc.) - I am connecting remotely use NX which I think is the problem - is there a way I can get it unlocked, or is there a way to add a user from the command line with all the same default structure that the graphical way sets up?
[09:27] <Myrtti> delly: install wine and install it with that
[09:28] <test> delly just use synatic  and install NVU its working same as dreamwaver
[09:28] <greaser> yea doesnt find the network
[09:28] <test> or you can use Quanta Plus also working same as dreamwaver
[09:29] <nsadmin> can greaser-desktop ping 192.168.1.2?
[09:29] <tangentx> okay, sorry guys, I'm good now
[09:29] <delly> i have already installed wine but dreamweaver  is not in wine
[09:29] <test> just search synatic  for Quanta you will find it just same as dreamwaver
[09:29] <greaser> yea
[09:29] <test> why you need dreamwaver as there is tons of software working same as dreamwaver
[09:29] <nsadmin> it can? good. so you're connected
[09:29] <greaser> or wait
[09:29] <ajrion> i hhave ubuntu 8.04 and i did sudo apt-get install xubuntu-desktop and i STILL dont have a start bar in xfce please help
[09:30] <nsadmin> now:
[09:30] <nsadmin> on greaser-desktop....
[09:30] <nsadmin> apt-get install ipmasq
[09:30] <winema> Is it possible to install ubuntu from vmware onto the c:\ hdd?
[09:30] <greaser> i dont think its pingin it after all
[09:30] <nsadmin> it will calculate a NAT setup for you
[09:30] <greaser> its not giving me my prompt
[09:30] <nsadmin> oh, really?
[09:30] <greaser> dang it
[09:31] <nsadmin> hmm
[09:31] <Triad_> I can't get Ubuntu to load past a certain point. Is there a way to test if my computer won't run it? I've tried both Wubi and disk installations, and have successfully installed Ubuntu on another computer. Help?
[09:31] <nsadmin> do you see link lights at the eth0 and the xbox?
[09:31] <greaser> let me restart terminal
[09:32] <test> what is the best IRC client ?
[09:32] <delly> ok test but please give me camand
[09:32] <nsadmin> test: the one you like
[09:32] <test> I don't like xchat
[09:32] <test> is there something which is better ?
[09:32] <nsadmin> so that's not the best!
[09:32] <nsadmin> install another one and see
[09:33] <test> which ?
[09:33] <nsadmin> an irc client
[09:33] <test> is there something which i can use ?
[09:33] <greaser> there is linklights in the back of an xbox360?
[09:33] <greaser> lol
[09:33] <Boohbah> test: irssi
[09:34] <nsadmin> greaser: I dunno...
[09:34] <greaser> no there isnt
[09:34] <greaser> but the ones on my box are on
[09:34] <nsadmin> I'd expect to find it... those things aren't cheap
[09:34] <greaser> haha
[09:34]  * _sun_ 
[09:34] <typeliviu> ﻿why i can't see the movies on youtube????
[09:34] <typeliviu> is black
[09:35] <greaser> hmmm
[09:35] <nsadmin> typeliviu: you have to open your eyes first!
[09:35] <typeliviu> :::
[09:35] <typeliviu> and then
[09:35] <greaser> ok so its not seeing the xbox
[09:35] <greaser> hmmm
[09:35] <illumin8> typeliviu, do you have flash installed?
[09:35] <typeliviu> yes
[09:35] <nsadmin> turn your head so you're facing the monitor that's connected to your computer
[09:35] <typeliviu> it is maN
[09:36] <typeliviu> i use mozila
[09:36] <nsadmin> greaser: try pinging again
[09:36] <typeliviu> what i can do
[09:36] <KillGuta> Hello all
[09:37] <typeliviu> hello
[09:37] <nsadmin> does xbox have a shell window?
[09:37] <KillGuta> Anyone know a good GUI download manager like FlashGet?
[09:37] <typeliviu> killGuta esty roman?
[09:37] <KillGuta> da :)
[09:37] <greaser> no ping response
[09:37] <greaser> and no shell on xbox
[09:37] <nsadmin> hmm
[09:37] <typeliviu> de ce nu pot vedea filmele pe youtube
[09:37] <KillGuta> pai iti trebuie flash player
[09:37] <nsadmin> ok,
[09:37] <typeliviu> pei il am
[09:38] <KillGuta> stai un pic ca iti dau link
[09:38] <typeliviu> asa cred\]
[09:38] <typeliviu> ok
[09:38] <illumin8> typeliviu, what version of ubuntu are you using
[09:38] <typeliviu> 8.4
[09:38] <illumin8> ?
[09:38] <illumin8> 8.04?
[09:38] <typeliviu> yes
[09:38] <Cwe_chinese> Hello...
[09:38] <KillGuta> typeliviu http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_10_linux.deb
[09:38] <greaser> man i dont want a router!! #&^@#
[09:38] <typeliviu> si se instaleaza automat?
[09:39] <greaser> lol gonna make my room messy
[09:39] <typeliviu> sau cum se procedeaza ca sunt incepatot
[09:39] <illumin8> try "sudo apt-get install ubuntu-restricted-extras"
[09:39] <KillGuta> pai downloadeazal si dai "run" ca la windows :))
[09:39] <nsadmin> greaser: greaser-desktop is your router
[09:39] <KillGuta> ma rog instaleaza pachet
[09:39] <illumin8> be sure your browser is closed
[09:39] <greaser> hehe
[09:39] <greaser> does dhcp server come out the box?
[09:39] <greaser> or maybe i  should look into one
[09:40] <snorungen> which command do I use to list all open network connection to my box?
[09:40] <sky_> hi
[09:40] <nsadmin> no, I'm trying to find the one I have, which has a gooey front end
[09:40] <sky_> where i must install splash theme ?
[09:40] <illumin8> greaser xbox does have a dhcp server
[09:40] <sky_> resp. i mean how
[09:40] <greaser> o
[09:40] <greaser> xbox does?
[09:40] <greaser> hmm
[09:40] <winema> Anyone here had experience installing windows using Wubi? or unetbootin?
[09:40] <nsadmin> illumin8: thinking of installing one on the ubuntu
[09:40] <illumin8> thats how its able to identify windows shares and attach to networks
[09:41] <greaser> ahhh
[09:41] <trollboy> I don't remember if I installed Hardy Heron or Intrepid Ibex, is there an easy way to check?
[09:41] <KillGuta> typeliviu ii dadusi de cap?
[09:41] <greaser> hmm
[09:41] <illumin8> although its a bandwidth hog, fyi
[09:41] <typeliviu> stay un pik
[09:41] <nsadmin> trollboy what's in /etc/debian_version
[09:41] <greaser> imma try and switch the cables on my two nics, see if i still get an IPv6
[09:41] <trollboy> nsadmin, lenny/sid
[09:41] <greaser> be back in a sec
[09:42] <gordonjcp> illumin8: what's a bandwidth hog?
[09:42] <nsadmin> interesting
[09:42] <gordonjcp> illumin8: dhcp?
[09:42] <illumin8> gordonjcp, xbox
[09:42] <Ricket> is there some magical easy way to switch to ubuntu x86 from x86_64 or do i have to do the dreaded reinstall?
[09:42] <nsadmin> thers's a dhcp3 daemon
[09:42] <gordonjcp> illumin8: ah, does it do that weird streaming stuff all the time whether you want it to or not thing?
[09:42] <trollboy> nsadmin?  Does that mean anything to you
[09:42] <illumin8> gordonjcp, exactly, its infinatly connected
[09:43] <hatten> ximo: i had the same problem
[09:43] <nsadmin> trollboy: yeah, it speaks to ubuntu's parent
[09:43] <trollboy> right, but how does that tell me what version I'm running?
[09:43] <illumin8> gordonjcp, i ran one on a dsl service i had a while back and it put me into "status" which basicly filters and reduces your bandwidth till its offline
[09:43] <nsadmin> it doesn't
[09:43] <KillGuta> typeliviu BRB schimb ircul pe x-chat :D
[09:43] <trollboy> then why did you ask nsadmin?
[09:43] <nsadmin> and I dunno how to get ubuntu version if not for that
[09:44] <gordonjcp> illumin8: I was surprised to find that the Wii keeps pretty quiet most of the time, unless it's looking for updates
[09:44] <alarm_> hello. my ubuntu boots up really slow. it takes something like 5 minutes to finish with booting and log in
[09:44] <gordonjcp> illumin8: and it only seems to do that if you ask it
[09:44] <alarm_>  what could i check to see whats wrong and why does it take so long. i dont find it a normal time (compared to debian)
[09:44] <nsadmin> trollboy: oh, I was under the impression the ubuntu devs would alter that file to state what version it is
[09:44] <illumin8> Ricket,  your best bet is a fresh install of 32 bit
[09:44] <alarm_>  i am using a laptop. 2.5 dual core. 4gb ram . nvidia8600
[09:44] <nsadmin> maybe they don't know about that file
[09:44] <alarm_>  hdd on laptops are not the fastest, but this doesnt explain the low boot up time
[09:44] <KillGutza> Wonder why they didn't make x-chat preinstalled in ubuntu :D
[09:44] <nsadmin> and maybe they don't know about /etc/network/interfaces either
[09:45] <alarm_> not at those levels at least. i disabled all unneeded daemons and servers that i did not need allready, like ppp, or bluetooth, printers etc
[09:45] <gordonjcp> KillGutza: doesn't pidgin do IRC?
[09:45] <sky_> KillGutza: because pidgin
[09:45] <KillGutza> Gordonjcp yes it does, but I like x-chat more :D
[09:45] <illumin8> xchat is pretty :)
[09:45] <illumin8> +1 xchat
[09:45] <alarm_> +1 xchat :P
[09:46] <sky_> +1Pidgin
[09:46] <sky_> :-P
[09:46] <Ricket> KillGutza: i like thunderbird more than evolution, it doesn't come default either... can't make everyone happy all the time :)
[09:46] <Anub|s> hi what is a good book to learn ubuntu intrepid?
[09:46] <alarm_> pidgin has to consider more hypermedia factors...
[09:46] <illumin8> Anub|s, i have a link here give me a second
[09:46] <sky_> ubuntu with moomex theme awsome :)
[09:46] <Anub|s> thx illum
[09:46] <illumin8> Anub|s, also, advanced or beginner?
[09:46] <dmphotography> Hye, I have a question in regards to partitions.
[09:46] <Anub|s> beGINNER
[09:47] <alarm_> it is about time for pidgin to add some video conversation , if i want just text i can stay here on irc servers
[09:47] <greaser> hmmm
[09:47] <alarm_> anyway. any idea about what could i check about my boot time  ?
[09:47] <greaser> still nothing, xbox is not finding the network
[09:47] <illumin8> Anub|s, http://www.ubuntupocketguide.com/download2.html
[09:47] <dmphotography> I'm showing to have an extended partition named /dev/sdb2
[09:47] <IndyGunFreak> whats that website, where the old-release ISO's are maintained,.... Ive got a friend trying to upgrade an edgy box, and hes' constantly running into closed repos
[09:47] <typeliviu> tot nu merge
[09:47] <dmphotography> and a sub-partition off of it named /dev/sdb5.
[09:47] <typeliviu> killGuta
[09:48] <dmphotography> How do I remove the /dev/sdb2?
[09:48] <KillGutza> dadusi un restart la Mozilla?
[09:48] <gordonjcp> Ricket: actually, evolution has got some very *very* serious bugs that make it almost completely unusable
[09:48] <typeliviu> da
[09:48] <gordonjcp> Ricket: so I don't know why they have it either
[09:48] <KillGutza> hmmm incearca sa iei 8.10
[09:48] <typeliviu> ce sa mai fac
[09:48] <KillGutza> poate e vreun fix
[09:48] <illumin8> typeliviu, do you have any other firefox running that you may not be aware of? ie inside system monitor on processes?
[09:48] <typeliviu> nooo
[09:49] <ziroday> KillGutza: english only please
[09:49] <dmphotography> N E one?
[09:49] <KillGutza> ziroday sorry
[09:49] <Anub|s> very very cool illumin8 thanks
[09:49] <typeliviu> i dont ahve any firefox open
[09:49] <illumin8> ziroday, typeliviu is romanian and asked him for help, wasnt his fault :)
[09:49] <nsadmin> do xboxes return ping replies?
[09:49] <illumin8> nsadmin, yes
[09:50] <nsadmin> so somethign's wrong
[09:50] <typeliviu> yes i'm romanian
[09:50] <gordonjcp> dmphotography: one what?
[09:50] <Anub|s> woot satu mare
[09:50] <sky_> anyone can me help why i cant kill opera process if she take freez ? :-O
[09:50] <KillGutza> =))
[09:50] <doc`> how can i see which my default soundcard is
[09:50] <greaser> uhmm
[09:50] <dmphotography> I need help changing the partition(s)
[09:50] <greaser> haha im not even sure
[09:50] <typeliviu> so what can i do
[09:50] <nsadmin> cat /proc/asound/cards
[09:50] <greaser> is there like a network sharing option in linux?
[09:51] <gordonjcp> !ask | dmphotography
[09:51] <dmphotography> I have one showing as dev/sdb2 and a sub-partition off of that showing to be /dev/sdb5 and I want to remove /dev/sdb2
[09:51] <nsadmin> greaser: what if we try installing a dhcp server on greaser-desktop
[09:51] <doc`> im guessing 0 is the default?
[09:51] <doc`> how do i change it
[09:51] <typeliviu> cine mai e roman
[09:51] <greaser> hmmm
[09:51] <greaser> check this out
[09:52] <greaser> http://www.mind-download.com/2007/10/connecting-to-xbox-live-through-linux.html
[09:52] <illumin8> typeliviu, did you find any more firefox running?
[09:52] <typeliviu> no
[09:52] <typeliviu> illumin8
[09:52] <greaser> haha
[09:52] <greaser> let me try that
[09:52] <greaser> brb
[09:52] <illumin8> typeliviu, and you installed the extras?
[09:52] <typeliviu> yes
[09:52] <gfather> guys when ever i want to install something oe unstall , i get an error
[09:52] <illumin8> typeliviu,  one second let me see what my defualt settings are in fox
[09:53] <dmphotography> Well does anyone know the command to delete a partition then?
[09:53] <gfather> subprocess post-installation script returned error exit status 2
[09:53] <typeliviu> ok
[09:53] <nsadmin> greaser we kinda already did... it should work
[09:53] <greaser> o
[09:53] <platon> where is inittab in ubuntu????
[09:53] <gfather> and a decency error
[09:53] <theriel> does anyone else by chance use intel HD audio?  i'm having trouble getting it to work with alsa, in particular the audio-out jack.  i found this: http://alsa.opensrc.org/index.php/Hda#cooliris but it doesn't seem to fix anything.
[09:53] <greaser> i get permission denied anyway
[09:53] <greaser> hmm
[09:53] <nsadmin> platon: you're probably using upstart
[09:53] <greaser> when i run the first cmnd
[09:53] <gfather> <dmphotography yes , use fdisk
[09:54] <gfather> select the partiton
[09:54] <gfather> and delet it
[09:54] <platon> upstart is the ubuntu's inittab?? where is??
[09:54] <illumin8> typeliviu, is it alright if i private message you this could be a setting error
[09:54] <nsadmin> upstart is ubuntu's new init
[09:54] <durt> !modules.conf
[09:55] <nsadmin> inittab is now split into many files in a dir
[09:55] <mouseless> Hi there.
[09:55] <nickckck> good morning... i'm having troubles about installing ubuntu on my raid array and configuring dual boot...
[09:55] <mouseless> Something is periodically (and frequently) stealing my mouse pointer and returning it to the center of the screen.  It is extraordinarily frustrating!  Any troubleshooting ideas?
[09:55] <greaser> how do i get root in terminal?
[09:56] <mouseless> greaser,  sudo sh, or su -
[09:56] <durt> mouseless: are you running synergy?
[09:56] <DoomsDave> or sudo bash
[09:56] <gfather> guys any help ?
[09:56] <mouseless> durt, Yes, but it isn't running at the moment.
[09:56] <gfather> its really annoying
[09:56] <theriel> no one else uses intel HD audio? :
[09:57] <durt> mouseless: do a 'ps -A |grep synergy" to make sure
[09:57] <mouseless> theriel, I think my work machine uses it, but I'm at home right now.  What's up?
[09:57] <mouseless> durt: it's not running
[09:57] <mouseless> theriel, it's one of those sucky IBM/lenovo machines.  I am 90% sure it uses intel hd audio onboard
[09:58] <theriel> having issues with it.. the headphone jack doesn't work.  any info i've found on the forums has been for gutsy only.
[09:58] <nickckck> anyone knows how to install ubuntu 8.10 on raid array (after installing dmraid)?
[09:58] <theriel> i've got an acer 7730
[09:58] <mouseless> theriel, the internal speaker and line out both work, though?
[09:59] <theriel> internal speaker works.  when i play music with the speakers plugged in it ignores them and plays with the laptop speakers.
[09:59] <theriel> the line in i don't have anything to test it with.
[09:59] <mouseless> theriel, weird.  but why are you plugging powered speakers to a headphone jack?
[10:00] <DoomsDave> it's probably the only audio output there is
[10:00] <doc`> ok, have some problems with usb speakers, every time i restart my computer i have to unplug them and run pkill -9 pulseaudio and pulseaudio --daemon and then plug them in
[10:00] <theriel> it's a headphones/speaker/line out jack with S/PDIF
[10:00] <theriel> yeah, exactly.
[10:00] <tymensk> hi, after upgrading my ubuntu studio I lost my sound
[10:01] <tymensk> can someone help
[10:01] <doc`> this is a problem with trying to set my default speakers, with asoundconf set-default-card
[10:01] <mouseless> theriel, Ah, I see.  I had an all-in-one jack problem like that w/ my realtek codec.  Updated drivers did fix it
[10:02] <greaser> man this is gonna kill me
[10:02] <greaser> lol
[10:02] <greaser> how do we set up the dhcp
[10:02] <greaser> haha
[10:02] <nsadmin> apt-get install dhcp3-server
[10:03] <nsadmin> the thing is... we're kinda ignoring the fact the xbox isn't hearing the pings
[10:03] <nsadmin> it would be nice to solve that problem
[10:04] <test> is there lammp server package to install it at once like Lampp server ?
[10:04] <nickckck> for installing ubuntu on raid after installing the dmraid support, I need to start the installation manually?
[10:05] <durt> !blacklist-oss
[10:05] <greaser> hmm let me google
[10:05] <Myrtti> !lamp | test
[10:06] <nsadmin> you really want to deal with mysql?
[10:08] <soumen> s
[10:09] <soumen> scrollback 10
[10:09] <greaser> says they wont respond to ping
[10:09] <soumen> quit
[10:09] <soumen> exit
[10:09] <theriel> was just looking, it seems to be an issue with alsa 1.0.17, and that's the latest package.  they have updated drivers and libraries on alsa's page though.
[10:09] <theriel> 1.0.19
[10:10] <theriel> lemme see if that helps
[10:10] <Evilrick> I got a problem with 8.04 HH, as of a few weeks ago my removable media stopped automounting. MMC cards USB disks and the CD rom drive. I can still mount them manually with sudo mount so its not a hardware issue. If I log into Gnome as root then the automounting works. I have checked my settings in gconf-editor and the settings in my user administration tool. Any Ideas? here are my subsystem...
[10:10] <Evilrick> ...logs http://paste.ubuntu.com/117863/
[10:10] <greaser> and when i run any apt commands it says unable to lock administrator derectory
[10:14] <doc`> when i set the default soundcard to my usb-speakers and restart they stop working, and i have to do pkill -9 pulseaudio and pulseaudio --daemon to get them to work again, any ideas?
[10:16] <Bodsda> doc`, happened to me, there is a way to configure pulseaudio properly, but, sudo apt-get remove --purge pulseaudio    works just as well
[10:18] <aaditya> hello peeps
[10:18] <Bodsda> morning
[10:18] <illumin8> whats the command to tell if you are using 32bit or 64 bit ubuntu
[10:19] <aaditya> How many programmers does it take to kill a cockroach?
[10:19] <Bodsda> illumin8, uname -a ?
[10:19] <illumin8> Bodsda, thanks :)
[10:19] <Myrtti> aaditya: #ubuntu-offtopic
[10:19] <aaditya> Two: one holds, the other installs Windows on it
[10:19] <doc`> Bodsda do i need to reboot to make it change default speakers with asoundconf set-default-card
[10:20] <Bodsda> doc`, no, its instant, but after doing it, kill pulseaudio  then restart your music, if that fixes it then you may want to think about removing pulseaudio
[10:21] <os-natas> I'm trying setup compiz on a laptop with intel815 graphics chip and I get this error "software rasterizer in use",  can someone tell me what this error means?
[10:21] <test> !php
[10:21] <Bodsda> os-natas, a quick google provides this -- http://ubuntuforums.org/showthread.php?t=1018240
[10:22] <nickckck> no one has installed ubuntu on raid array in dual boot with windows?
[10:22] <nickckck> no one can help me?
[10:22] <doc`> ah
[10:22]  * Bodsda is away
[10:22] <Cwe_chinese> doc
[10:23] <Cwe_chinese> hellooo
[10:23] <doc`> ah sweet, think it works now
[10:23] <Bodsda> your welcome
[10:23] <uspenok> Is it dangerous to share my home directory via ftp ?
[10:23] <doc`> hi Cwe_chinese
[10:23] <chazco> Hi... does anyone know how to fix the "a program is still running" dialog at shutdown? It doesnt say which application it is...
[10:23] <bentob0x> how do you remove a .deb file installed with gdebi?
[10:24] <bentob0x> uninstall a .deb file I mean
[10:24] <Bodsda> bentob0x, sudo apt-get remove <packagename>
[10:25] <Bodsda> uspenok, sort of yes, most of your programs store there config files in your home dir, just make sure you set appropriate permissions
[10:25] <uspenok> so ?
[10:25] <uspenok> Bodsda: Thx
[10:26] <WillPittenger> I have having some sort of problem getting Virtual Box's guest additions installed onto Ubuntu 8.10.  The package appears to be installed, but VBox doesn't detect the mouse integration is supported and video is limited to 800x600.
[10:26] <nickckck> maybe no one is reading me... boh...
[10:26] <WillPittenger> No one has answered yet even though I have asked several times on this channel.
[10:28] <Evilrick> I got a problem with 8.04 HH, as of a few weeks ago my removable media stopped automounting. MMC cards USB disks and the CD rom drive. I can still mount them manually with sudo mount so its not a hardware issue. If I log into Gnome as root then the automounting works. I have checked my settings in gconf-editor and the settings in my user administration tool. Any Ideas? here are my subsystem...
[10:28] <greaser> where can i get apt sources?
[10:28] <Evilrick> ...logs http://paste.ubuntu.com/117863/
[10:28] <greaser> i need proftpd
[10:28] <greaser> or a good ftp server
[10:29] <SmileDay> Help!! Crazy my sound!! help... sound noting! help
[10:30] <Evilrick> greaser: apt normally is configured automatically
[10:30] <SmileDay> bye
[10:30] <greaser> sudo apt-get install pureftpd doesnt work
[10:30] <greaser> says cant find
[10:30] <Evilrick> greaser: is tehre a http or ftp entry if you do "cat /etc/apt/sources.list"
[10:31] <Evilrick> what does apt-get update do
[10:31] <Oli``> When I double click bash scripts with execute permissions, they load in gedit rather than running... is there some way I can change this behaviour so they run? Or otherwise add a right-click option so I can run them that way?
[10:32] <greaser> ahh
[10:32] <greaser> it loads all the files
[10:32] <greaser> i think it might not be pureftpd
[10:32] <Evilrick> try "apt-get install proftpd gproftpd"
[10:32] <greaser> maybe pure-ftos
[10:32] <greaser> ftpd*
[10:33] <doc`> pure-ftpd exsist
[10:33] <rzw3762> greaser: you should have searched with apt-cache search ...
[10:33] <Evilrick> greaser: by default the repository only has a KDE control tool for pure
[10:33] <inflex> I is confused - as root/sudo, I can play my music (naughty!), but as my default user I cannot (device not found in rhythmbox, cmus or even alsamixer)
[10:33] <rzw3762> greaser: apt-cache search pure | grep ftp
[10:33] <Evilrick> otherwise yeah use "apt-get install pure-ftpd"
[10:33] <inflex> I've checked permissions of my user, they're in the audio group and the /dev/dsp and /dev/mixer even have global read/write rights.
[10:34] <greaser> ahhh
[10:34] <greaser> nice
[10:34] <greaser> thats how thats worked
[10:34] <greaser> haha thanks
[10:34] <Evilrick> greaser: in future use the gnome package manager and use teh search tool there.
[10:34] <rzw3762> greaser: see? the package is named pure-ftpd
[10:35] <greaser> yea i was going crazy with pureftpd
[10:35] <greaser> no dash
[10:35] <greaser> too late to be thinking
[10:35] <greaser> hehe
[10:38] <rio> hi, i can't change my display brightness on thinkpad r61, any ideas? :(
[10:40] <amt2> is there any channel where I can get help on OGRE?
[10:40] <gavimobile> folks, i have a connection to my server saved in my bookmarks. i had a crash in the middle of working just now and i cannot seem to reconnect.. my server is running fine
[10:40] <perlsyntax> Does anyone know how i can get python-gtk2-devto work do i need to mport qt to start out   my python script?
[10:41] <perlsyntax> anyone?
[10:42] <illumin8> typeliviu is having an issue i attempted to help him sort out, he gets no video streams from either youtube or hulu.com. That sounded like a flash issue to me, so i had him install restricted extras, checked to be sure he was on 32 bit, and then manually installed adobe. Hes still getting no picture, any ideas?
[10:42] <perlsyntax> ?
[10:43] <perlsyntax> anyone use python in here?
[10:43] <Budtske> I cannot mount my raid array by UUID, sudo vol_id -u /dev/device gives me the correct one, but it is not listed in /dev/disk/by-uuid/.
[10:43] <illumin8> sorry perlsyntax  im not fimilar with it.
[10:43] <nsadmin> perlsyntax: normally you put a specific, informative, concise and complete question before a "?", otherwise people might not understand what you want
[10:43] <Budtske> so if i add it to fstab i get mount: special device /dev/disk/by-uuid/48af03d8-d9bf-4d52-bab7-19dde43163d6 does not exist
[10:43] <jrib> perlsyntax: best to just ask your question (if it's a python programming question, ask #python)
[10:44] <perlsyntax> i did
[10:44] <zak_>  anyone uses turboprint ?
[10:45] <jrib> Budtske: does « ls -l /dev/disk/by-uuid/ » not show it at all then?
[10:45] <nsadmin> gtk or qt?
[10:45] <zak_>  anyone uses turboprint  please , i need the 1.x version
[10:45] <Budtske> jrib: it shows all devices except my raid5 partition
[10:46] <cyyn> nmnb
[10:46] <nsadmin> Budtske: perhaps the array is not active
[10:46] <Budtske> nsadmin: i have it mounted right now using /dev/device in fstab
[10:46] <Budtske> can write to it no problem
[10:47] <nsadmin> you have the same partition mounted you want mounted somewhere else?
[10:47] <indian_munnda> he all! can anyne help me with half life. I have installed it using wine and i can play in local servrer with both. Its shows master server list. And even i can join server but after joining it hangs. Then i close it by killing proccess hl.exe. ANYONE PLZ HELP ME OUT OF THE SITUATION PLZ....
[10:47] <Budtske> nsadmin: i did unmount it first before trying to mount it using uuid
[10:47] <nsadmin> hmm. what filesystem type?
[10:47] <Budtske> ext3
[10:47] <gavimobile> when restarting my computer. does that restart nautalis as well or does nautalis sessions get saved
[10:47] <nsadmin> that should have a uuid
[10:48] <nsadmin> see what's in /dev/disk/by-uuid
[10:48] <nsadmin> maybe it's different now... did you format it recently?
[10:48] <Dr-Nick> !register
[10:49] <nsadmin> maybe the kernel doesn't support uuids
[10:49] <Budtske> nsadmin: i have my other partitions mounted by uuid
[10:49] <nsadmin> Budtske: when was the last time you formatted this parttion?
[10:49] <Budtske> nsadmin: and /dev/disk/by-uuid shows my partitions except this one
[10:49] <nsadmin> so it's not there?
[10:50] <Budtske> nsadmin: today...
[10:50] <ttl-> greetings everyone
[10:50] <Budtske> nsadmin: let me guess i should reboot
[10:50] <Budtske> doh
[10:50] <indian_munnda> he all! can anyne help me with half life. I have installed it using wine and i can play in local servrer with both. Its shows master server list. And even i can join server but after joining it hangs. Then i close it by killing proccess hl.exe. ANYONE PLZ HELP ME OUT OF THE SITUATION PLZ....
[10:50] <zak_>  anyone uses turboprint  please .?
[10:50] <nsadmin> did you use the uuid that was current yesterday?
[10:50] <nsadmin> (or so)
[10:50] <Budtske> nsadmin: nope, got it after i formated
[10:51] <nsadmin> hmm, should have worked I think...
[10:51] <bimal> can any one help me to trouble shoot my networking devices
[10:51] <nsadmin> except I'm not too familiar with uuids (I do use them, but not on a raid)
[10:52] <the_real_funzo> guys, is there a program you can run on ubuntu where you can install windows xp and run windows while running ubuntu? ^^
[10:52] <bimal> i cannot access my bluetooth device. can anyone help me?
[10:52] <illumin8> the_real_funzo, virtualbox
[10:52] <nsadmin> so what I think is happening, is the raid gets activated but (for some reason) the uuids don't get read in
[10:53] <ttl-> I've made a USB-stick install of 8.10 and it runs great but when playing around with the screen orientation (upside down, right, left) it suddenly crashed and now i'm not able to set it back to normal because when i do this it crashes again...
[10:53] <the_real_funzo> thanks illumin8 :D
[10:53] <nsadmin> the missing information is why, and what's missing
[10:53] <ttl-> is there a config file in casper-rw that i can change to get it back to normal screen orientation ?
[10:54] <greaser> nsadmin thanks for all your help, i'll mess with it more tomorrow
[10:54] <greaser> imma go back to windows and stream a movie to watch and go to sleep
[10:54] <greaser> hehe
[10:54] <Dr-Nick> My X session isn't able to start except in failsafe mode. Are there any log files besides ~/.xsession-errors that I should check?
[10:55] <nsadmin> seemingly aggregarious red garnished eggplant
[10:55] <ezerhoden> Dr-Nick: /var/log/Xorg.0.log
[10:56] <typeliviu> hello...i use ubuntu 8.o4 and i cant see the movies on youtube...i have installed flashplayer
[10:56] <amt2> is there any good desktop-recording software? I am trying to use Istanbul, but if I record something it looks really ugly, like if it were a series of very slow screenshots, and with a black flash between each screenshot
[10:56] <jrib> typeliviu: pastebin the content of the page you see when you visit "about:plugins" in firefox
[10:56] <bimal> how can i access my wirelecc networking devices?
[10:58] <ezerhoden> bimal: commands like iwconfig, iwlist, iwpriv. what are you trying to do?
[10:58] <bimal> i tried
[10:58] <bimal>  but its not working
[11:00] <tavi> hello
[11:00] <tavi> i need help whit some pdf's
[11:00] <bimal> ezerhoden: when i press the wirless button on my lap its not working
[11:01] <quibbler> tavi: what is the problem?
[11:01] <tavi> i have 100 variants for a exam...but the files in each variants are splitted
[11:01] <tavi> each variants has 3 subjects ....that arent on same page
[11:01] <tavi> how i can put these pdf's togheter?
[11:01] <bimal> ezerhoden: can you suggest any way to control it
[11:01] <Imaginativeone> hey everyone...
[11:02] <Imaginativeone> Firebox just froze my entire system
[11:02] <Imaginativeone> how do I fix that?
[11:02] <ezerhoden> bimal: easiest way would be nm-applet. is you card recoqnized by the system?
[11:02] <the_real_funzo> can you play windows games in virtualbox good?
[11:02] <bimal> ezerhoden: yes
[11:02] <Imaginativeone> the_real_funzo: yes
[11:03] <ezerhoden> bimal: are you using the networkmanager applet?
[11:03] <bimal> i am actually using ubuntu studio 8.1
[11:03] <the_real_funzo> wow, that's exactly what i have been looking for :D
[11:03] <Imaginativeone> once you get your optical drive working, you're home free
[11:03] <jrib> tavi: you can probably do it somehow with pdftk (you'll have to read docs though as I don't know much about it)
[11:03] <bimal> ezerhoden: i installed network manager
[11:03] <bimal> now the pbl goes upside down.
[11:04] <tavi> pdftk?
[11:04] <quibbler> tavi: maybe this will help: http://www.debianadmin.com/combine-multiple-pdfs-into-one-file-in-ubuntu-linux.html
[11:04] <tavi> a program?
[11:04] <jrib> tavi: yes
[11:04] <bimal> the wireless goes always on
[11:04] <ezerhoden> bimal: you are tyring to turn off wireless?
[11:04] <Xunie> I get an menu error (as in "Blahblahblah, Can't create menu entry for something in gnome") every time I isntall a package... Now how do I fix this?
[11:05] <bimal> ezerhoden: now i removed network manager
[11:05] <Xunie> I will pastebin the error in a few minutes..
[11:05] <tavi> quibller? that works whit console?
[11:05] <bimal> ezerhoden: when i install it the wireless is always active
[11:05] <bimal> ezerhoden: actually i am not having any control
[11:05] <quibbler> tavi: yes it's in theuniversal repos
[11:06] <dmphotography> Can someone tell me what the chmod syntax for changing only directory permissions recursively and not the files is?
[11:06] <Imaginativeone> does anyone know how to fix frozen firefox?
[11:06] <tavi> i ask if in him work whit console
[11:06] <jrib> dmphotography: no such thing.  Use find if that's really what you want to do
[11:06] <Imaginativeone> dmphotography: not me
[11:06] <jrib> tavi: yes...
[11:07] <dmphotography> Imaginativeone: How about just re-installing it?
[11:07] <jrib> Imaginativeone: kill it and start it again?
[11:07] <tavi> i need a program that make trought drag and drop ....cause i have 100 files ot combine
[11:07] <jrib> tavi: I've told you one and so has quibbler
[11:07] <tavi> well have you worked whit him?
[11:08] <jrib> tavi: huh?
[11:08] <tavi> worked whit that pdftk?
[11:08] <bimal> ezerhoden: even if i install network manager i cannot aces bluetooth. please help
[11:08] <jrib> tavi: yes...
[11:08] <ezerhoden> bimal: i have no experience with bluetooth
[11:09] <something132> hey i have a problem, cd burning doesnt work
[11:09] <tavi> i need like this....to open a lot of pdf files..and be able to combine them .....trought drag and drop
[11:09] <amt2> I am trying to install an application called xvidkap. When I do ./configure, I get this: http://pastebin.ca/1337027
[11:09] <amt2> I would appreciate any suggestions
[11:09] <jrib> tavi: why would you want to open and/or drag and drop a hundred files?  Wouldn't it be easier to run a single command...?
[11:09] <bimal> ezerhoden: can  you help me to switch off wifi when network manager is installed?
[11:10] <something132> am i in the right place for cd burning?
[11:10] <something132> problems i mean
[11:10] <jrib> something132: yes
[11:12] <tavi> is like this varian1 which have subject 1 ...then variant2 whit suject 1 ....thet after variant 100 subject 1 come variant 1 subject 2 , variant 2 subject 2 , then.....
[11:12] <ezerhoden> bimal: ifconfig wlan0 down ? change to your device
[11:12] <tavi> i need variant 1 whit subject 1,2 and 3 then variant 2 whit subject 1,2 and 3
[11:12] <jrib> tavi: right,  I understand.  I don't know of a drap and drop way to accomplish what you want.  However, I do know pdftk will do what you want....
[11:12] <illumin8> amt2, have you tried manually installing the needed packages?
[11:12] <bimal> ezerhoden: i tried that its not working
[11:13] <tavi> i will need to write a lot lines
[11:13] <ezerhoden> bimal: what card is it? or what driver does it use?
[11:13] <jrib> tavi: not really as long as you've named your files sanely
[11:13] <illumin8> amt2, sudo apt-get install libglade2-0 libglade2-dev
[11:13] <tavi> will come command variant1 subect 1 variant 1 subject 2 variant 1 subject 3
[11:14] <tavi> troght terminal take more
[11:14] <bimal> ezerhoden: realtek rtl8187B
[11:14] <tavi> drag and drop is easier
[11:14] <jrib> tavi: if you say so, but I don't know of a drag and drop way
[11:14] <Ryzzan> need some help with grub config
[11:14] <Ryzzan> anyone?
[11:14] <Imaginativeone> anyone familiar with the Firefox freezing problem?
[11:14] <something132> anyone willing to help, http://paste.ubuntu.com/118004/
[11:14] <jrib> Imaginativeone: be more specific
[11:14] <ras> cd #ubuntu-fr
[11:14] <tavi> well...whats the name of the program
[11:14] <Nicark> !ask
[11:14] <tavi> ?
[11:14] <ras> ><' sorry
[11:14] <jrib> tavi: pdftk ...
[11:14] <ezerhoden> bimal: well, you could always unload the driver and load it manually when you want to use wireless
[11:15] <amt2> illumin8, thanks! the script seems to be making some more progress now
[11:15] <Imaginativeone> Firefox freezes and nothing on my Ubuntu system is available at all
[11:15] <Imaginativeone> I had to reboot
[11:15] <quibbler> tavi: i don't know the program ...but you can look at pdfedit also in synaptic
[11:15] <bimal> ezerhoden: no other way?
[11:15] <tavi> and then i will write command variant 2 subject 1 variant 2 subject 2 variant 2 subject 3
[11:15] <tavi> will take a lot
[11:15] <Imaginativeone> this is a fresh install from about a week ago
[11:15] <tavi> pdf edit i have it...and is unable to open a lot on pdf in same time
[11:15] <ezerhoden> bimal: i am sure there is but i would have to google or read a man page or two
[11:15] <jrib> tavi: you are making 1 huge pdf from 100 single pdf files?
[11:16] <mcscruff> Hi, whats the command to find out what driver my wireless card is using
[11:16] <Imaginativeone> ifconfig
[11:16] <ikonia> lsmod
[11:16] <tavi> no
[11:16] <ikonia> Imaginativeone: no it's not
[11:16] <ikonia> Imaginativeone: that won't show you the kernel modules
[11:16] <illumin8> amt2,  no problem, if the problems persist thers a deb package avialable
[11:16] <tavi> i make from 300 pages 100
[11:16] <Imaginativeone> ikonia: thanks
[11:16] <Ryzzan> i have windows xp installed in sda5... and configures grub like this: title		Windows XP / rootnoverify	(hd0,4) / savedefault / makeactive / chainloader	+1
[11:16] <bimal> ezerhoden: when i was using ubuntu 8.04 its working perfectly
[11:16] <jrib> tavi: then explain what the structure is like.  Pastebin your directory structure and what your desired output is
[11:16] <something132> http://paste.ubuntu.com/118004/
[11:16] <ezerhoden> mcscruff: lscpi -v
[11:17] <bimal> ezerhoden: but now i installed ubuntu studio 8.1
[11:17] <mcscruff> ezerhoden, thanks
[11:17] <tavi> variant 1 subject 1 will merge whit varinat 1 subject 2 ....and variant 1 whit subject 3
[11:17] <ezerhoden> bimal: and how did you turn it off then?
[11:17] <Imaginativeone> what's the best alternative to firefox?
[11:17] <Ryzzan> when i truy to boot, its says that device is wrong... or something like this
[11:17] <ezerhoden> mcscruff: lspci -v sorry
[11:17] <bimal> ezerhoden: i deinstall network manager
[11:17] <tavi> jrib: i will make a draw
[11:17] <jrib> tavi: are there only 3 subjects?  How many variants are there?
[11:17] <mcscruff> ezerhoden, i found it :)
[11:17] <something132> google chrome :P
[11:17] <tavi> 3 subictes 100 variant
[11:17] <Imaginativeone> cool
[11:17] <mcscruff> Imaginativeone, i like swiftfox but opera is also good
[11:17] <Imaginativeone> thanks
[11:18] <tavi> each variant has 3 subject
[11:18] <Ryzzan> i have windows xp installed in sda5... and configured grub like this:  title		Windows XP /  rootnoverify	(hd0,4) / savedefault / makeactive / chainloader	+1
[11:18] <something132> google chrome
[11:18] <Imaginativeone> opera is good?
[11:18] <Imaginativeone> that's music to my ears
[11:18] <Ryzzan> when i try to boot, its says that device is wrong... or something like this
[11:18] <something132> google chrome is best apart from firefox
[11:18] <Imaginativeone> how do I get google chrome from the command line?
[11:18] <Ryzzan> anyone can tell me what's wrong?
[11:19] <tavi> but who maked the files didn't putted the 3 subjects from each variant togheter
[11:19] <typeliviu> what is more good kopete or pidgin
[11:19] <giodegas> Hi there, I have a problem with the Home Menu item, it does not open my folder anymore
[11:19] <inflex> Can you run X in 16 bit mode in Ubuntu?
[11:19] <jrib> tavi: something like:  for VARIANT in seq 100; do pdftk variant${VARIANT}subject{1..3} cat output variant${VARIANT}; done       would work...
[11:19] <Ryzzan> anyone?
[11:19] <Ryzzan> :)
[11:19] <giodegas> it says: cannot open "file://home/<user>"
[11:20] <something132> oh wait google chrome still isnt out for linux
[11:20] <Imaginativeone> rats
[11:20] <something132> it is in progress in making it linux
[11:20] <Imaginativeone> was someone pulling my leg?
[11:20] <something132> i thought it was
[11:20] <Ryzzan> i have windows xp installed in sda5... and configured grub like this:  title		Windows XP /  rootnoverify	(hd0,4) / savedefault / makeactive / chainloader	+1
[11:20] <something132> but it wasnt on it yet
[11:21] <inflex> Sad that Firefox has gone from being the godly-fast-and-good browser to just like Mozilla before it :(
[11:21] <Ryzzan> when i try to boot, its says that device is wrong... or something like this
[11:21] <Ryzzan> anyone can tell me what's wrong?
[11:21] <giodegas> anybody can help me?
[11:21] <jrib> !enter
[11:21] <jrib> !helpme | giodegas
[11:21] <ezerhoden> bimal: my little girl is up. have to go for a bit
[11:21] <tavi> jrib: yea and i will then make fr each variant ...
[11:21] <something132> kl
[11:21] <amt2> illumin8, well, looks like the config script terminated, but then I run 'make' and get some more trouble, do you want to see?
[11:21] <jrib> tavi: no, my command takes care of that (the for loop)
[11:22] <tavi> one command for all?
[11:22] <bimal> ezerhoden: ok thanks
[11:22] <giodegas> !repeat
[11:22] <jrib> tavi: yes.  You have to modify it according to however you've named your files of course
[11:22] <giodegas> |patience
[11:22] <giodegas> !patience
[11:22] <kindofabuzz> what is the 1 for in sys.argv[1]?
[11:22] <kindofabuzz> true?
[11:23] <Nicark> Ryzzan, Probably what's wrong is that rootnoverify (hd0,4) is pointing at the wrong partition.
[11:23] <kindofabuzz> ooops wrong room
[11:23] <alap> Hi, I am installing my driver using modprobe, but failing to install it as its not being shown in dmesg. Please help me to solve this problem.
[11:23] <giodegas> kindofabuzz: 1 is for the second place in the list of command line arguments
[11:23] <illumin8> amt2, sure
[11:23] <kindofabuzz> thanks giodegas
[11:23] <Ryzzan> Nicark, windows xp is on sda5... so it's right to say (ha0,4)... isn't it?
[11:24] <Ryzzan> i'm sure its sda5 cuz i mounted it
[11:24] <something132> well will anyone reply?
[11:24] <something132> http://paste.ubuntu.com/118004/
[11:25] <Ryzzan> i have windows xp installed in sda5... and configured grub like this:  title		Windows XP /  rootnoverify	(hd0,4) / savedefault / makeactive / chainloader	+1
[11:25] <Ryzzan> when i try to boot, its says that device is wrong... or something like this
[11:25] <archman> guys, how do i make ubuntu to use custom ip with my wifi card?
[11:26] <Ryzzan> i'm sure it's on sda5 cuz i mounted it
[11:26] <RoyK> hi. is there a way to make an alasis multimix 8 usb work with ubuntu(studio)? I want to use it with ardour...
[11:26] <illumin8> Ryzzan, those settings look correct.
[11:26] <something132> http://paste.ubuntu.com/118004/
[11:26] <something132> i need help!
[11:26] <Ryzzan> illumin8, so am i supposed to get a bullet in the head?
[11:26] <Ryzzan> :P
[11:27] <something132> ok i am goin somewhere else
[11:27] <quibbler> something132: it's asking for a dvd not a cd
[11:27] <something132> oh it is a dvd
[11:27] <amt2> illumin8, actually, i think it worked... the program looks pretty buggy, but thanks for your help
[11:27] <quibbler> something132: then try another ..maybe it is no good
[11:27] <something132> i have tried 6 of them
[11:28] <tavi> jrib: tell me a web site that can help me to share images
[11:28] <illumin8> amt2, your welcome
[11:28] <illumin8> Ryzzan, you verified the windows install is not hidden?
[11:29] <something132> this might help, the files i am writing are .avi?
[11:29] <quibbler> something132: what burn program?
[11:29] <voyagi> Can you put an IDE harddrive in a cabinett for an extern dvd-player?
[11:29] <jrib> tavi: imageshack.us
[11:29] <khelll1> how to find the mac address of my pc
[11:29] <jrib> khelll1: ifconfig
[11:30] <something132> and burn program is the cd/dvd creator
[11:30] <khelll1> jrib what info exactly
[11:30] <Ryzzan> illumin8, how am i supposed to?
[11:30] <Ryzzan> :)
[11:30] <burkmat> khelll1, `ifconfig | grep HWaddr`
[11:30] <quibbler> something132: are you burning it as a data dvd and not a video dv>
[11:30] <jrib> khelll1: HWaddr
[11:30] <something132> dunno
[11:30] <something132> how do i find out
[11:30] <illumin8> Ryzzan, give me a second im trying to find info for ya :)
[11:30] <quibbler> *dvd
[11:30] <tavi> hwait a minute
[11:30] <archman> jrib: how can i check my ubuntu ip and change it?
[11:30] <Ryzzan> illumin8, ty...
[11:30] <khelll1> jrib i got 3 different values
[11:30] <Xunie> My xbox 360 controller (which is recognized as a joystick normally), Now gets recognized as a mouse! O.o
[11:31] <jrib> archman: ifconfig will tell you your ip
[11:31] <Xunie> And I want it to be recognized as a joystick again (or atleast remove the control functions from X
[11:31] <jrib> khelll1: ok
[11:31] <tangentcollision> does anyone know of an emulated x desktop program?
[11:31] <tangentcollision> like a little extra desktop I can move around
[11:31] <burkmat> archman, You can change your IP through `ifconfig <interface> <ip_you_want>` or through the GUI.
[11:31] <Ryzzan> illumin8, i can access the whole thing since i mounted sda5... i just cant boot from it...
[11:31] <something132> heeelllllllllp
[11:31] <quibbler> something132: or use another burning program
[11:32] <something132> like what?
[11:32] <the_real_funzo> when you create a virtual machine in virtualbox, how much RAM should you allocate to it if you want to play games and such? 192MB as they recommend is that enough?
[11:32] <illumin8> Ryzzan,  can you repost your settings?
[11:32] <tavi> http://img16.imageshack.us/my.php?image=thisisitjw1.png
[11:32] <illumin8> is it set to noverify or root?
[11:32] <quibbler> !burn
[11:32] <Ryzzan> title		Windows XP /  rootnoverify	(hd0,4) / savedefault / makeactive / chainloader	+1
[11:32] <tavi> http://img14.imageshack.us/my.php?image=thisisitek7.png
[11:33] <Ryzzan> illumin8, title		Windows XP /  rootnoverify	(hd0,4) / savedefault / makeactive / chainloader	+1
[11:33] <tavi> http://img19.imageshack.us/my.php?image=thisisit3lb0.png
[11:33] <siva> hi
[11:33] <tavi> http://img18.imageshack.us/my.php?image=thisisit4cj9.png
[11:33] <illumin8> Ryzzan, thanks i think i see the problem but let me check on google
[11:33] <tavi> http://img19.imageshack.us/my.php?image=thisisit5ud5.png
[11:33] <siva> anybody there to help me
[11:33] <burkmat> !ask | tavi
[11:33] <tavi> http://img17.imageshack.us/my.php?image=thisisit6kl9.png
[11:33] <burkmat> !ask | siva
[11:33] <Ryzzan> illumin8, ty...
[11:33] <tavi> that's all
[11:33] <archman> xjrib burkmat: thanks guys, it worked ;)
[11:33] <jrib> tavi: don't do that please.  If you have multiple lines to show us, use pastebin.  If you want to get my attention, use my nick
[11:33] <tavi> 6 print screens
[11:33] <burkmat> archman, Anytime. :)
[11:34] <tavi> well
[11:34] <smooch1502> if anyone needs help tell me
[11:34] <tavi> that means to apostebin them
[11:34] <tavi> and then show you the files
[11:34] <jrib> !paste | tavi
[11:34] <tavi> this is easier
[11:34] <sharif_aly> webmin
[11:34] <smooch1502> pastebin.ubuntu.com
[11:34] <jrib> tavi: not for me...
[11:34] <siva> siva
[11:34] <sharif_aly> is there webmin to control the server ?
[11:34]  * smooch1502 slaps [gquit]bombadil around a bit with a large trout
[11:34] <tavi> wel have you saw them?
[11:34] <archman> burkmat: erm...subnet mask changing maybe? possible?
[11:35] <bimal>   smooch1502:   how to stop wireless
[11:35] <siva> how can i penetrate virus inti a system
[11:35] <alap> Hi, I am installing my driver using modprobe, but failing to install it as its not being shown in dmesg log. Please help me to solve this problem.
[11:35] <smooch1502> on ubuntu
[11:35] <siva> on windows
[11:35] <tavi> jrib: ?
[11:36] <tavi> have you looked at them?
[11:36] <tangentcollision> siva: what are you asking now?
[11:36] <jrib> tavi: no
[11:36] <tangentcollision> something that we don't support?
[11:36] <something132> ok none of them work
[11:36] <tavi> so?
[11:36] <the_real_funzo> when you create a virtual machine in virtualbox, how much RAM should you allocate to it if you want to play games and such? 192MB as they recommend is that enough? anyone?
[11:36] <quibbler> tavi: you have not given the pastebin url
[11:36] <tavi> see them
[11:36] <smooch1502> bimal: what do you mean
[11:36] <Ihat> hey all i got a slight problem right now and im a complete newb with linux... i cant get the connection to work with my wireless, what shall i do? it keep popping up with the window that i enter the pass for the connection (and it works if i boot on windows)
[11:36] <IrishDave> the_real_funzo: no... at least 1GB
[11:37] <smooch1502> !ubottu
[11:37] <tavi> you wait for your pastebin?
[11:37] <jrib> tavi: just pastebin the terminal output from ls...
[11:37] <the_real_funzo> okey IrishDave, thanks
[11:37] <tavi> ?
[11:37] <tavi> what?
[11:37] <bimal> smooch1502: initially my wireless devices were not working
[11:37] <smooch1502> !pastebin
[11:37] <IrishDave> the_real_funzo: it really depends on what ram you have in your system
[11:37] <something132> none of those cd burners work
[11:37] <something132> any help?
[11:37] <jrib> tavi: do « ls » in the directory you want to show me, copy and paste the output to paste.ubuntu.com, tell me the link
[11:37] <burkmat0> archman, lol, just to test the syntax I acidentally changed my own netmask disconnecting me... :P anyways. `ifconfig <interface> <ip> netmask <netmask>` worked. Not sure if IP is required.
[11:38] <illumin8> ryzzan the final command chainloader (hd0,4)+1
[11:38] <tavi> it's imageshack pictures....
[11:38] <IrishDave> the_real_funzo: if you have 2GB of ram say then you will want about 1GB - 1.5GB for it but you will struggle to get games to work inside a virtual machine
[11:38] <archman> burkmat: ok, i'll try now!
[11:38] <bimal> smooch1502: but when i install network manager it goes on continuously
[11:38] <Ryzzan> illumin8, luv u
[11:38] <Ryzzan> uehueheuheuheu
[11:38] <something132> #alsa rules
[11:38] <illumin8> try that.
[11:38] <khelll> when i do ifconfig, i get 3 different mac values for 3 interfaces
[11:38] <IrishDave> the_real_funzo: you dont get 3D acceleration properly
[11:38] <Ryzzan> i'll try and come later to say thnx
[11:38] <bimal> smooch1502: i cannot control it usiing the button assigned to it
[11:39] <jrib> tavi: I know.  They're pretty useless to me.  ls will make it easier to see
[11:39] <Ryzzan> illumin8, i'll try and come later to say thnx
[11:39] <Ryzzan> later
[11:39] <jrib> tavi: or just describe the structure yourself
[11:39] <the_real_funzo> oh, damn, that's too bad. So I can't play crysis and stuff in it?
[11:39] <khelll> when i do ifconfig, i get 3 different mac values for 3 interfaces, jirb?
[11:39] <something132> can anyone help me?
[11:39] <tavi> http://paste.ubuntu.com/118010/
[11:39] <Ihat> hey all i got a slight problem right now and im a complete newb with linux... i cant get the connection to work with my wireless, what shall i do? it keep popping up with the window that i enter the pass for the connection (and it works if i boot on windows)
[11:39] <smooch1502> bimal: please privite im me
[11:39] <archman> burkmat: worked, thanks! :) ;)
[11:40] <bimal> smooch1502: sorry i didnt get it
[11:40] <jrib> tavi: ok, I saw the pictures.  I need you to either describe the structure yourself or pastebin the ls output
[11:40] <something132> Ihat: can you ever connect?
[11:40] <smooch1502> bimal: sorry please say the problem again
[11:40] <something132> have you i mean
[11:40] <tavi> how i pastebin that ls ?
[11:40] <Ihat> i could 15 days ago with ubunto and i can if i boot with windows
[11:40] <jrib> tavi: how about this qusetion.  List all the files that compose variant 1
[11:40] <Dr_Willis> ls | pastebinit
[11:40] <Dr_Willis>  is one way
[11:40] <bimal> smooch1502: i am using ubuntu studio 8.1
[11:41] <smooch1502> this channel is for only ubuntu users
[11:41] <something132> kl
[11:41] <tavi> variant 1 has 3 subjects.... subject 1 and 3 ...that arent togheter
[11:41] <bimal> smooch1502: initially i cannot use my wireless/wired networking devices
[11:41] <tavi> varinats 1 subject 1,2 and 3 ...sorry
[11:41] <smooch1502> bimal: ok
[11:42] <bimal> smooch1502: i installed network manager and now the device is always active
[11:42] <jrib> tavi: I understand that.  I already gave you the command in this general setting.  If that's all you want, ok.  But if you want help modifying the command for how you've named your files, you need to tell me how you've named your files
[11:42] <smooch1502> bimal: sorry i cant help with ubuntu-studio
[11:42] <something132> anyone helpin me?
[11:42] <jrib> !helpme | something132
[11:42] <something132> dvd burnin problem
[11:42] <tavi> well look at the images
[11:42] <something132> !repeat
[11:42] <tavi> they are named exacly like that
[11:42] <tweak66> having a bit of an issue here.. now matter how many times or different ways i delete my bookmarks, when i close adn re-open firefox my old bookmarks are there and new ones are gone. any ideas?
[11:43] <bimal> smooch1502: i really need the help
[11:43] <smooch1502> !help
[11:43] <jrib> tavi: ok, then modify the command accordingly exactly like that...-
[11:43] <smooch1502> #ubuntu studio
[11:43] <something132> DVD burning problem
[11:43] <jrib> something132: be specific
[11:44] <bimal> smooch1502: thanks let me try it
[11:44] <smooch1502> bimal: Sorry i cant help
[11:44] <something132> it wont let me burn, it says i should put in a new dvd
[11:44] <something132> one sec
[11:44] <something132> i will pastebin
[11:44] <something132> http://paste.ubuntu.com/118004/
[11:44] <jrib> something132: did you try a different disk?
[11:44] <something132> yep
[11:44] <something132> six others
[11:45] <illumin8> something132, this may be an odd question but are the disks compatible with your writer?
[11:45] <something132> i dunno
[11:45] <quibbler> something132: have you tried brasero
[11:45] <something132> yep
[11:46] <something132> doesnt work
[11:46] <tavi> jrib: ? so? what is the answer?
[11:46] <illumin8> have you used them to burn anything other than todays attempt?
[11:46] <something132> no
[11:46] <something132> they are new DVDs
[11:46] <jrib> tavi: List all the exacty names of the files that compose variant 1
[11:46] <illumin8> on occasion i find that specific brands dont fuction well for me
[11:46] <jrib> -y
[11:46] <gnomey> hi! I'd like to format my usb drive but I have no idea how to do that. my drive is listed in:  lsusb
[11:46] <illumin8> in my case sony dvds wont allow me to write.
[11:46] <clovist> Anyone help me with sound issues? Im trying to go through this https://help.ubuntu.com/community/SoundTroubleshooting but i dont think im typing the 'uname -r' command correctly. The "aplay -l" command shows analog and digital ALC888.
[11:46] <something132> ok thats why one didnt work
[11:47] <something132> #alsa
[11:47] <something132> clovist:#alsa
[11:47] <burkmat> gnomey, What FS would you like to format it with?
[11:47] <illumin8> Ryzzan, any news?
[11:47] <Ryzzan> illumin8, same error: "Invalid Device Requested"
[11:47] <illumin8> Ryzzan, hmm, moment :)
[11:47] <gnomey> burkmat, dunno fat32?
[11:48] <Ryzzan> illumin8, and it's crazy... cuz sda5 is the correct device
[11:48] <Ryzzan> illumin8, i even configured it to fstab... and its working
[11:48] <smooch1502> !ban
[11:48] <jrib> smooch1502: why did you do that?
[11:48] <smooch1502> do what
[11:48] <jrib> tavi: do you understand why I need that information?
[11:48] <jrib> smooch1502: what you just did... "!ban"
[11:49] <smooch1502> oh im just testing
[11:49] <gnomey> burkmat, but i can't see the drive in the  "Computer" directory (only Cdrom and Filesystem) but it's listed in lsusb
[11:49] <jrib> !msgthebot | smooch1502
[11:49] <tavi> a_limba_romana_i_001.pdf  a_limba_romana_ii_001.pdf a_limba_romana_ii_001.pdf
[11:49] <tweak66> having a bit of an issue here.. now matter how many times or different ways i delete my bookmarks, when i close adn re-open firefox my old bookmarks are there and new ones are gone. any ideas?
[11:49] <tavi> yes
[11:49] <clovist> really go to alsa? im getting no sound at all and i tried switching everything to OSS which made no difference
[11:49] <burkmat> gnomey, Does `sudo fdisk -l` show the USB stick?
[11:49] <tavi> the iii are the subjects....they should be togheter ...but arent
[11:50] <jrib> tavi: and variant 2 just increments the "001" part?
[11:50] <nsadmin> clovist tried alsamixer?
[11:50] <Ryzzan> burkmat, it does
[11:50] <BrokenClockwork> is there a better alternative to GRUB GFX?
[11:50] <gnomey> burkmat, it says "/dev/sdb doesn't contain a valid partition table"
[11:50] <burkmat> Ryzzan, ...how do you know what gnomeys computer is doing? oO
[11:51] <tavi> jrib:  no the 001, 002 ,003 are the number of the variant
[11:51] <illumin8> Ryzzan, have you tried root instead of root noverify?
[11:51] <Ryzzan> burkmat, wrong name... sry
[11:51] <illumin8> Ryzzan, the exact setting would be root (hd0,4) in your case i beleive
[11:51] <tavi> is like variant 1...100 fisrt subject....then varinat 1....100 second subject.....variant 1...100 third subject
[11:51] <jrib> tavi: what is the number of the last variant?
[11:51] <burkmat> gnomey, Ah, you need to partition it then first. :) `fdisk /dev/sdb` then press the keys `n p 1 <enter> <enter>` - That should just make the entire stick a single partition.
[11:51] <_igel_> hi
[11:52] <smooch1502> vye
[11:52] <smooch1502> bye
[11:52] <Ryzzan> illumin8, i did it... but not with the chainloader new set
[11:52] <_igel_> where to get CPU temp. and fan information when started with liveCD?
[11:52] <Ryzzan> i'll try it now
[11:52] <gnomey> burkmat, oh ok :D thanks a lot!
[11:52] <tavi> 100 varinat .....each 3 subject....that arent's togehther
[11:52] <burkmat> Actually, does anyone have a suggestion for an easier to use partitioner tool? Pointing everyone to fdisk feels a bit harsh if they're new. :/
[11:52] <Ryzzan> illumin8, i'll be back
[11:52] <Xunie> I ask again: How can I prevent Xorg from detecting my xbox 360 controller (as a mouse)?
[11:53] <burkmat> gnomefreak, ah, you'll probably need to finish with a w to write the changes... Actually, let me find a better tool, fdisk can be a bit annoying if you're not familiar with it. :)
[11:53] <_igel_> sensors isn't installed, neither does /proc/acpi/thermal_zone/ contain info
[11:53] <burkmat> gnomey, ah, you'll probably need to finish with a w to write the changes... Actually, let me find a better tool, fdisk can be a bit annoying if you're not familiar with it. :)
[11:53] <obst> hello! How can I find out which program is using port 28786
[11:53] <tweak66> burkmat use GParted
[11:53] <burkmat> obst, `netstat -plantu` perhaps?
[11:53] <jrib> tavi: something like:  for VARIANT in seq -w 100; do pdftk a_limba_romana_{i,ii,iii}_${VARIANT}.pdf cat output a_limba_romana_${VARIANT}.pdf; done       would work...
[11:54] <tavi> well
[11:54] <skcute> hi
[11:54] <clovist> nsadmin: just installed it now what about it?
[11:54] <tavi> i need first to open pdftk
[11:54] <tavi> then?
[11:54] <jrib> tavi: pdftk is a command line program
[11:55] <tavi> so i need to do ..... open terminal....pdftk.... cd to the files......then this command?
[11:55] <arussel> I am looking for an epub reader that could upload stuff to my sony reader, manage books and stuff ... Any recommendations ?
[11:55] <ronny> hmm
[11:55] <jrib> tavi: just: terminal, cd to the files, command
[11:55] <tavi> and pdftk not opened
[11:55] <tavi> ?
[11:55] <ronny> why the heck does the "Software sources" tool have no simple way to import keys from ppa's?
[11:56] <Imaginativeone> would someone help me upgrade samba?
[11:56] <obst> burkmat, I did this but it does not give me a result for the specified port
[11:56] <burkmat> obst, Are you sure anything is using the port? Or are you just looking for all programs that use it?
[11:57] <daliang> hello ,i have i promble with Firestart,it can't start saying "the device is not ready" what should i do? thank you !
[11:57] <gnomey> burkmat, did you find a better tool than fdisk? :) maybe qparted?
[11:57] <jrib> tavi: pdftk is in the command I gave you
[11:57] <quibbler> tweak66: try closing firefox go to the .mozella >firefox>(your profile) and delete localstore.rdf it may be corrupt...don't worry when you start firefox it will make it again
[11:58] <tavi> so....
[11:58] <burkmat> gnomey, Yeah, was just about to suggest it. Just run `sudo gparted` and it should be easier to sort it out. :)
[11:58] <tavi> open terminal ...pdftk then cd to the files
[11:58] <jrib> tavi: so there's nothing to do before...
[11:58] <tweak66> quibbler thank you i will try
[11:58] <jrib> tavi: no.  terminal, cd, command I gave you
[11:58] <gnomey> burkmat, thanks a lot!
[11:59] <burkmat> gnomey, No problems. I'm actually not very familiar with gparted, so... I'm not sure it'll format it for you as well, but let me know if you need that done manually later. :)
[11:59] <Dr_Willis> gparted can format.
[11:59] <daliang> hello ,i have i promble with Firestart,it can't start saying "the device is not ready" what should i do? thank you !
[11:59] <daliang> who can help me
[12:00] <kelik> hi
[12:00] <tavi> whitout open any program i have cd to the files
[12:00] <tavi> i am in the folder which contains the files
[12:01] <tavi> i have ls in the folder and show me that varinats and subject
[12:01] <tavi> so now i am in the foder
[12:01] <tavi> folder
[12:01] <alap> Hi, I am trying to install a driver using modprobe, but failing to do so as its not being shown in dmesg log. Please can anyone help me to solve this problem.
[12:02] <faz> hi all
[12:02] <DVA5912> WO. I though linux didnt get viruses...http://en.wikipedia.org/wiki/List_of_Linux_computer_viruses#cite_note-14
[12:03] <DVA5912> im installing av
[12:03] <whooperdoo> alap: what modules?
[12:03] <faz> could anybody help with keyboard layout ?
[12:03] <tavi> jrib: ?
[12:03] <burkmat> faz, Sure. What's the problem?
[12:03] <jrib> tavi: yes?
[12:04] <jrib> faz: just ask your question
[12:04] <nsadmin> tenehawk: looks like crond starts normally... so: it's what's after that's the problem
[12:04] <nsadmin> [A
[12:04] <Dr_Willis> DVA5912,  you may want to reread that artical a bit more. and next time ya paste a url be sure to put spaces befor and after it :)\
[12:04] <tavi> failed
[12:05] <tavi> http://paste.ubuntu.com/118019/
[12:05] <tavi> look at that
[12:05] <faz> I've changed the keyboard layout and then can't loging to my box
[12:05] <obst> burkmat, Firestarter always reports connections to this port from IPs I dont know and Im wondering what application is responsible for these connections
[12:05] <jrib> tavi: you need to run the full command I gave you, not parts of it
[12:05] <tavi> the full comand is?
[12:05] <illumin8> DVA5912, according to your link it just metnions that cross platform applications like activex could create vunerablities. not that there are any :)
[12:05] <tavi> where starts where ends?
[12:06] <faz> cant change language from login screen
[12:06] <jrib> tavi: for VARIANT in seq -w 100; do pdftk a_limba_romana_{i,ii,iii}_${VARIANT}.pdf cat output a_limba_romana_${VARIANT}.pdf; done
[12:06] <burkmat> obst, Well... Are you sure a program is actually listening on the port? Is it actually connecting or just attempting?
[12:06] <kelik> hiiiiiiiiiiiiiii
[12:07] <tavi> again
[12:07] <tavi> http://paste.ubuntu.com/118020/
[12:07] <tavi> not worked
[12:07] <faz> burkmat: any suggestions.. ??
[12:08] <burkmat> faz, Ah... Guessing your password contains something that was moved? Did you try just figuring out where it is on the new layout? ^^
[12:08] <jrib> tavi: my mistake:
[12:08] <jrib> tavi: for VARIANT in `seq -w 100`; do pdftk a_limba_romana_{i,ii,iii}_${VARIANT}.pdf cat output a_limba_romana_${VARIANT}.pdf; done
[12:09] <tavi> now didn't said anything
[12:09] <jrib> tavi: pastebin
[12:09] <alap> whitefang_, i have a driver and its getting compiled without any error or warning so i tried to install it using modprobe as per procedure that is copying .ko to /lib/ modules/2.4.24-386/extras , then depmod and modprobe no errors till here but as i check for thr driver i hv installed using dmesg, the dmesg log is not showing it in the list.........
[12:09] <Ihat> im still tryying to get my network to work on wireless and now i managed to get network manager to show my wireless device as unmanaged, how do i change this back?
[12:09] <cristi> faz: does this help you? http://ubuntuforums.org/showthread.php?t=663718
[12:09] <JoeJoe24> hello thar. I have an Acer Aspire 3680 and it uses the broadcom wireless card. I cant seem to connect. How can I find this driver?
[12:09] <tavi> whit what?
[12:10] <jrib> tavi: pastebin the command you ran and what happened
[12:10] <faz> no :(
[12:10] <faz> I can't even login
[12:10] <tavi> http://paste.ubuntu.com/118021/
[12:10] <alap> whooperdoo,  i have a driver and its getting compiled without any error or warning so i tried to install it using modprobe as per procedure that is copying .ko to /lib/ modules/2.4.24-386/extras , then depmod and modprobe no errors till here but as i check for thr driver i hv installed using dmesg, the dmesg log is not showing it in the list.........
[12:10] <faz> can't type my login-name
[12:10] <tavi> then nothign after the command
[12:10] <quibbler> !broadcom
[12:11] <cristi> faz: uhm that guy was having the same problem as you, did you read the thread?
[12:11] <jrib> tavi: you didn't get a new shell prompt?
[12:11] <Dr_Willis> broadcom makes a lot of diffrent chipsets
[12:11] <tavi> no
[12:11] <tavi> a
[12:11] <jrib> tavi: then it's still doing stuff.  See if new files are being created
[12:11] <JoeJoe24> ubottu: thanks!
[12:11] <cristi> tavi: bafta la bac xD
[12:11] <tavi> that little blink point?
[12:11] <Ihat> im still trying to get my network to work on wireless and now i managed to get network manager to show my wireless device as unmanaged, how do i change this back?
[12:11] <burkmat> faz, You could try SSHing into the box and changing it back?
[12:12] <tavi> jrib: is a problem
[12:12] <obst> burkmat, I think they are only attempting to so nevermind
[12:13] <iz_> u
[12:13] <tavi> the files where created .....but....they are on separated pages ....i wanna them to e continus
[12:13] <jrib> tavi: what is?
[12:13] <tavi> the files where created .....but....they are on separated pages ....i wanna them to e continus
[12:13] <jrib> tavi: then you'll have to read pdftk's documentation
[12:13] <iz_> Where do I edit the script for IP-tables?
[12:13] <tavi> well...then i do not know
[12:13] <tavi> i will print them as they are
[12:13] <Ihat> anyone?
[12:14] <illumin8> Ihat, sorry im not fimilar with wireless configurations
[12:14] <Ihat> well is there any way so i can get Network manager to manage the device again?
[12:15] <Ryzzan> illumin8, just didnt work...
[12:15] <illumin8> Ryzzan, it did nothing?
[12:15] <Ryzzan> illumin8, same error
[12:16] <cristi> can anyone provide a good site or anything on networking with ubuntu?
[12:16] <Ryzzan> illumin8, "Error 12: Invalid Device Requested"
[12:16] <illumin8> Ryzzan, theres a trick i was reading about, that said to use your origional setup, except to remove the makacvite line. seems it works with newer versions of xp and vista
[12:16] <Ryzzan> illumin8, rootnoverify?
[12:17] <illumin8> Ryzzan, yes use your rootnoverify and the original chainloader +1 but remove the makeacvite line
[12:17] <burkmat> !chroot > faz
[12:17] <DVA5912> Dang i hate this client. It doesnt always scroll down when a replay is made.
[12:17] <Ryzzan> illumin8, i'll try it now
[12:17] <illumin8> Ryzzan, luck :)
[12:17] <Ryzzan> illumin8, i'll be back
[12:17] <Ryzzan> illumin8, ty
[12:18] <tavi> jrib: ...please...help me...cause all the paper will be runed otu
[12:18] <illumin8> Hope that works for him im out of ideas
[12:18] <jrib> tavi: huh?
[12:19] <Dr_Willis> what is with the ... all over the place? it dosent make it that much clearer what you are saying...
[12:19] <ml> hello... does anybody know where I can download the ubuntu defualt system sounds?
[12:19] <tavi> they are on separated pages....make them continously
[12:19] <jrib> ml: packages.ubuntu.com I suppose
[12:20] <jrib> tavi: I don't know how.  I don't even know if it's possible or not with pdftk.  If you really need then, check the pdftk documentation
[12:20] <tavi> jrib: well i do not handle well linux
[12:20] <jrib> tavi: you haven't even tried to look at the documentation
[12:21] <Scutum_> Hi in going to install linux on my laptop, Im currently using Vista, I need to back up my files
[12:21] <tavi> jrib i am not good at pc too.....
[12:21] <Scutum_> I just booted my roomate pc with linux so I can back up my data there
[12:21] <rottenkid> hello
[12:21] <burkmat> Scutum_, How much data?
[12:21] <rottenkid> can someone help me please?
[12:21] <Scutum_> but I dont see the computer on my network
[12:22] <ml> thanks jrib looking
[12:22] <burkmat> !ask | rottenkid
[12:22] <BM8270> hi, is it normal for ubuntu to assume that current BIOS clock time is in GMT? When i select GMT+5, ubuntu advances my clock by five hours... why?!
[12:22] <marko_> can someone give me a hand please? im downloading stuff over bittorent but after leaving it on for 5 hours, i only seemed to have downloaded 50MB whereas in my ISP's website, it says i've downloaded 1.5GB!
[12:22] <rottenkid> i have installed shiki-colors theme and i can't set the panels to be transparent , i get something like this http://i43.tinypic.com/25s4b9i.gif
[12:23] <rakudave> Scutum_: try entering "smb://xxx.xxx.xxx.xxx" (ip of the other pc) into the filebrowser
[12:23] <ml> found them jrib :) thanks again
[12:24] <tavi> jrib: ?
[12:24] <danbhfive> rottenkid: are you using gnome?  there is a straight forward option...
[12:24] <tavi> cand you help me?
[12:24] <tavi> can
[12:24] <rottenkid> danbhfive, yes i use gnome
[12:25] <cristi> how can i see all the computers on a network grouped by workgroups? i am having trouble with network locations
[12:25] <cristi> i mean command line how can i see them
[12:25] <b1> ce_panggilan_smg
[12:25] <danbhfive> rottenkid: right click > props > background > transparent
[12:26] <rottenkid> danbhfive, i've done that and that screenshot is the result
[12:27] <BM8270> forgot to mention it happens during install of ubuntu 8.10
[12:27] <marko_> is it normal for the Transmission bittorent client to not display the amount downloaded correctly?
[12:28] <danbhfive> rottenkid: have you tried rebooting?  Im experimenting now, and I had your problem with a one  program.  Restarting the program fixed it.
[12:29] <rottenkid> danbhfive, i will reboot now , and get back after the pc starts to tell you if it worked or not
[12:29] <danbhfive> marko_: did you upload allot?
[12:29] <marko_> nope
[12:29] <marko_> and i get unlimited uploads
[12:29] <burkmat> marko_, Check your BT Client logs? Could be a lot of corrupt data downloaded?
[12:29] <bigbrovar> danbhfive>  he doesnt need to reboot to fix a panel transparent issue .. at most killall gnome-panel would do
[12:29] <danbhfive> yes, but uploading on bittorrent requires you to download...
[12:30] <Imaginativeone> would someone help me connect this xp machine to ubuntu?
[12:30] <marko_> i know but im downloading as im uploading and the uploads shouldn't add to my quota
[12:30] <danbhfive> bigbrovar: ah, you should have spoken up sooner
[12:30] <marko_> but i'll check the logs
[12:30] <burkmat> Imaginativeone, Define "connect"?
[12:31] <chazco> Hi... does anyone know how to fix the "unknown program is still running" dialog at shutdown?
[12:31] <burkmat> marko_, Well, all the time you're downloading information from the tracker. When I'm just uploading I always idle around 10 kbps down just tracker info...
[12:32] <Imaginativeone> burkmat: I would like to access an ubuntu share from xp
[12:32] <burkmat> Maybe tracker info is a bad phrasing... Just information about the transfer.
[12:32] <burkmat> Imaginativeone, Is the Ubuntu box running Samba?
[12:32] <nabilmalik> Dear All, yesterday I ran the updates on my Ubuntu 8.1 and upon restart, the grub only had the memtest option by default.. After some effort, i decided to reinstall ubuntu 8.1. The reinstall went all fine, but then after updating the system, every thins is very slow. Even opening the terminal takes time. Do you think that it can be because of the new kernel that was installed, and is not...
[12:32] <nabilmalik> ...compatible with my hardware? Please suggest.. Thanks.
[12:33] <marko_> burkmat, i just had a look at the statistics and it seems i have downloaded at least 800MB which is nothing near what it's showing what i've actually downloaded...but i cant seem to see any erros in the logs
[12:33] <rottenkid> danbhfive, still the same
[12:33] <burkmat> marko_, Hmm... Are you sure you're the one who's been downloading? Running a WiFi network or maybe someone "borrowed" the computer?
[12:33] <Imaginativeone> burkmat: the ubuntu machine is running Samba version 3.2.3
[12:34] <Imaginativeone> nabilmalik: I missed it
[12:34] <ml> gnome won't accept the ogg file for system sound?
[12:34] <whooperdoo> Imaginativeone: in nautilus right click a folder, if the correct packages installed there should be an option 'share', quick samba setup
[12:34] <danbhfive> rottenkid: I dunno, sorry
[12:34] <BM8270> nabilmalik: what did u choose to install/update?
[12:34] <burkmat> Imaginativeone, Well, I'm not too familiar with Samba, but did you try just Start -> Run -> \\IP_of_sambabox\ ?
[12:35] <rottenkid> danbhfive,  thanks anyway
[12:35] <Imaginativeone> whooperdoo: thanks!!
[12:35] <nabilmalik> BM8270: the normal update manager in ubuntu
[12:35] <nabilmalik> Imaginativeone: what did you miss?
[12:36] <BM8270> nabilmalik: i didn't know that ubuntu doesn't ask what to update..
[12:36] <mOO_kOW> i just installed satanic ubuntu n i dont have sound can ny1 help me
[12:37] <iPhier> i have trouble getting alsa working in my Ubuntu 8.10.
[12:37] <iPhier> http://idyllictux.wordpress.com/2008/10/29/alsa-instead-of-pulseaudio-for-ubuntu-810-intrepid-a-non-destructive-way/
[12:37] <Imaginativeone> whooperdoo: that worked!  but now I can't access the share...
[12:37] <iPhier> follwed the instructions in the URL. still unable to make it work
[12:37] <nabilmalik> Guys: just now i logged in to the gnome, and after along delay, there is an error message: The panel encountered a problem while loading "OADI ID:GNOME_MultiLoadApplet:... Do you wnat to delete the applet from your configuration?
[12:37] <iPhier> any pointers?
[12:38] <whooperdoo> Imaginativeone: in a terminal type as root 'smbpasswd -a -username' set a pass and you got basic smbpasswd auth
[12:38] <whooperdoo> Imaginativeone: 'smbpasswd -a test'
[12:38] <nabilmalik> BM: all the standard updates.. It was some thing like 300 plus MB.. i.e.: all the updates that are released for 8.1..
[12:39] <whooperdoo> nabilmalik: you reinstalled 8.10 or 8.04?
[12:39] <Ryzzan> illumin8, now something different happened...
[12:39] <illumin8> Ryzzan,  whats that?
[12:39] <tleeonly> get konqueror easier to see shares in ubuntu
[12:39] <nabilmalik> since i installed ubuntu from the cd, i suppore the cd does not have all the updates till to date..
[12:39] <Ryzzan> illumin8, a "starting up" message... but nothing else...
[12:40] <nabilmalik> whooperdo: 8.10
[12:40] <illumin8> add the line startup (hd0) below your rootnoverify
[12:40] <illumin8> Ryzzan, add the line startup (hd0) below your rootnoverify
[12:40] <Ryzzan> illumin8, but... think with me... if grub doesn't recognize the device... how is it going to get started?
[12:40] <ubuntu_> hello guys
[12:40] <ubuntu_> hello
[12:41] <illumin8> Ryzzan, I see what you mean, i actually have questions about it myself, was windows installed after ubuntu?
[12:41] <Ryzzan> illumin8, yes... it was
[12:41] <Imaginativeone> whooperdoo: no luck
[12:41] <illumin8> Ryzzan, windows installs to the mbr and if it cannot due to being on the back end partitions it could create boot.ini issues, basicly it would need to be installed on the first partiion.
[12:42] <BM8270> nabilmalik: intruiging to know that a full update can mess up things...
[12:42] <Imaginativeone> I don't even get an authentication box
[12:42] <Ryzzan> illumin8, and theres something about grub shell... when i use it, it simply doesn't recognize any disk
[12:42] <nabilmalik> ok
[12:42] <BM8270> hi, is it normal for ubuntu to assume that current BIOS clock time is in GMT? When i select GMT+5, ubuntu advances my clock by five hours... why?!
[12:42] <whooperdoo> Imaginativeone: restart samba
[12:42] <illumin8> Ryzzan, my recommendation would be to resintall windows to the first partion, then go about ubuntu afterwards, this allows grub to read the local files and create the proper menu for them automagicly
[12:43] <kolby> kickass
[12:43] <kolby> sorry
[12:43] <illumin8> Ryzzan, in my experience with windows it tends to not play nice with linux unless it gets first pick.
[12:43] <nabilmalik> can i roll back the updates?
[12:43] <Ryzzan> illumin8, try it yourself... in terminal... try /grub... then... /root (hdaN,N)
[12:43] <tavi> jrib:
[12:43] <tavi> ?
[12:43] <tavi> can u help me?
[12:44] <Imaginativeone> whooperdoo: smbd restart?
[12:44] <jrib> tavi: I already said, I don't know how to do what you want to do.  You should check pdftk's documentation
[12:44] <tavi> i already told hat i do not handle computers
[12:44] <Ryzzan> illumin8, where N=ur ubuntu boot
[12:44] <jrib> tavi: I'm not sure what you want me to do about that
[12:44] <whooperdoo> Imaginativeone: yep
[12:45] <tavi> and i have  a limited to finish...
[12:45] <Ryzzan> illumin8, tell me if it recognizes it
[12:45] <illumin8> Ryzzan, currently ubuntu is the only version on my system, although i have had tripple boots prior to this.
[12:45] <Ryzzan> illumin8, so tell what's the message in grub shell
[12:45] <tavi> he just copied the pages ...and paste them ....i wanna merge teh text
[12:45] <cow_2001> how do i reinstall a configuration file?
[12:45] <Ryzzan> illumin8, i'll show u what happens in here
[12:46] <cow_2001> the configuration file that comes with the deb package
[12:46] <Imaginativeone> how do I invoke swat?
[12:46] <tabber> Hi, all. Anyone knows that i might be getting "getnameinfo failed" errors right before and after the ssh entries when I run netstat -a
[12:47] <arvind_khadri> !swat | Imaginativeone
[12:47] <erUSUL> tabber: it can not resolve some of the ip adresses i guess
[12:47] <Ryzzan> illumin8, grub> root (hd0,6)
[12:47] <tavi> jrib:
[12:48] <tavi> may this be the answer ? Define a name in systemdict with the given definition. The token must be exactly one token (as defined by the token operator) and must not contain any whitespace.
[12:48] <Ryzzan> illumin8, Error 21: Selected disk does not exist
[12:48] <illumin8> Ryzzan, could you launch gparted and see if it registers the device?
[12:48] <Ryzzan> illumin8, and my linux partition is sda7
[12:48] <tabber> erUSUL: the weird thing is that it was wirking properly
[12:48] <Kartagis> how can i get dhcp to log in it's own file?
[12:48] <Ryzzan> ok
[12:48] <Ryzzan> illumin8, ok
[12:49] <cow_2001> solution: apt-get --purge remove [package] && apt-get install [package]
[12:49] <tavi> or this
[12:49] <tavi> Disable the prompt and pause at the end of each page.
[12:49] <arvind_khadri> !grub | illumin8 Ryzzan
[12:49] <erUSUL> tabber: doesn't look like a serious "error" maybe there is no dns for those machines (many small local lans don't have dns)
[12:50] <illumin8> arvind_khadri, his grub is still there, its just failing to load xp partion
[12:50] <Ryzzan> :)
[12:50] <tabber> erUSUL: i don't know if this might be related to but, I cannot sftp to that machine anymore....it times out
[12:50] <Ryzzan> illumin8, downloading it... just a second
[12:50] <arvind_khadri> illumin8, then look into the menu.lst
[12:51] <nabilmalik> hum, i guess than I should go ahead and reinstall ubuntu.. and not update it..
[12:51] <Viper111> hello there am using iptables but i couldnt know how to stop the msn messenger anybody can help
[12:51] <erUSUL> tabber: the system is down?
[12:51] <arvind_khadri> illumin8, and check whether the UUID's in there are proper or not
[12:51] <gregspence> how do i get samba to start automatically on my server..... i have to type /etc/init.d/samba restart everytime after it boots in to the terminal
[12:51] <BlackDalek> Is there anyway to get the TV out to work on an nvidia video card?
[12:51] <tabber> erUSUL: nope, i can ssh to it but not sftp
[12:51] <Ryzzan> illumin8, it recognizes it... in sda5, as told...
[12:51] <illumin8> arvind_khadri, Ah perhaps the uuid is the problem
[12:52] <arvind_khadri> illumin8, and ya the root too :)
[12:52] <erUSUL> gregspence: it should start with the system...
[12:52] <Viper111> hello there am using iptables but i couldnt know how to stop the msn messenger anybody can help
[12:52] <illumin8> Ryzzan, repost your settings so arvind_khadri can see
[12:52] <erUSUL> gregspence: do this « sudo update-rc.d samba defaults »
[12:52] <arvind_khadri> Ryzzan, paste your output of sudo fdisk -l and menu.lst on pastebin
[12:52] <erUSUL> !iptables | Viper111
[12:53] <arvind_khadri> !paste > Ryzzan
[12:53] <Ryzzan> ok
[12:53] <erUSUL> Viper111: drop all connections using the messenger ports??
[12:53] <danbhfive> Ryzzan: also paste your device.map
[12:53] <arvind_khadri> Ryzzan, is your ubuntu booting?
[12:54] <Ryzzan> arvind_khadri, ubuntu is working just fine... i'm only having problems with windows
[12:54] <illumin8> arvind_khadri, hopefully you guys can see something i missed. by default the settings he showed me looked correct.
[12:54] <gregspence> erUSUL: System startup links for /etc/init.d/samba already exist
[12:54] <arvind_khadri> Ryzzan, ok... paste the o/p of things i asked for
[12:55] <gregspence> urUSUL: that was the system output
[12:55] <shally87> which one is better  vbox-ose or vbox?
[12:55] <Viper111> erUSUL yes i need to stop everything related to msn i dont want anybody to use msn mesenger
[12:55] <burkmat> Viper111, Drop anything destined for port 1863 and you should be fine.
[12:56] <Viper111> burkmat i tried it but it didnt work
[12:56] <BlackDalek> I have a Geforce4 4200. Is it possible for the TV out port to work?
[12:57] <burkmat> Viper111, Hmm... How did you set up the rule?
[12:57] <arvind_khadri> shally87, ask bestbot in #ubutnu-bots
[12:58] <arvind_khadri> !poll > shally87
[12:59] <IntuitiveNipple> What would be the *fastest* way to compare two file-system trees (original and copy) to locate corrupted or truncated files (rsync -av -cn original/ copy/) ?
[12:59] <arvind_khadri> Ryzzan, ?
[12:59] <erUSUL> gregspence: well then you have to figure out why it fails at boot time but boots when you restart it...
[12:59] <Ryzzan> arvind_khadri, http://paste.ubuntu.com/118032/
[13:00] <Ryzzan> arvind_khadri, i'm brazilian... so, somethings r in portuguese... but i think there will be no problem
[13:00] <Scutum_> how do I set up a ftp sever? anybody?
[13:00] <Ryzzan> illumin8, sry about my english
[13:00] <Ryzzan> arvind_khadri, sry about my english
[13:00] <illumin8> Ryzzan, no appolgies needed.
[13:01] <arvind_khadri> Ryzzan, the second entry for windows must be the one you should boot into...
[13:01] <erUSUL> !ftpd | Scutum_
[13:01] <Viper111> burkmat am using web inteface but here is wat it works "	If protocol is TCP and source is 192.168.10.0 and input interface is eth1 and destination port is 1863 and source port is 1863 "
[13:01] <Ryzzan> arvind_khadri, sry... didn't get it
[13:02] <Ryzzan> arvind_khadri, the vista entry, u mean?
[13:02] <arvind_khadri> Ryzzan, ya
[13:02] <Ryzzan> arvind_khadri, not really... it's a recovery partition, actually
[13:03] <illumin8> arvind_khadri, how will that allow him access to the xp partition?
[13:03] <Ryzzan> arvind_khadri, hp pc standard
[13:03] <arvind_khadri> illumin8, i didnt know that he wants to boot into XP...
[13:03] <arvind_khadri> Ryzzan, where do you have your XP??
[13:03] <illumin8> arvind_khadri, oh sorry, basicly the problem is that its showing an device error when he attempts to boot to xp
[13:04] <Ryzzan> arvind_khadri, sda5
[13:04] <IntuitiveNipple> Viper111: the rule doesn't match since you're expecting the client to be sending from port 1863 (it'll use some random high-port)
[13:04] <illumin8> arvind_khadri, note he said the installed xp after ubuntu, would that effect the boot.ini file for xp?
[13:04] <anouar> Is there already a new version of beryl for ubuntu?
[13:05] <rjune_> How do I rerun the dpkg configuration script for ldap? or better yet, where can I find the script?
[13:05] <Viper111> IntuitiveNipple taib how can i write it to do wat i need
[13:05] <Ryzzan> arvind_khadri, grub doesn't recogine the device!
[13:05] <arvind_khadri> illumin8, no not at all....
[13:05] <danbhfive> anouar: beryl is now compiz
[13:05] <arvind_khadri> Ryzzan, ya you need to remove rootnoverify and make it as root ..
[13:05] <Ryzzan> arvind_khadri, "Error 12: Invalid Device required"
[13:05] <anouar> danbhfive: is compiz now as good as mac os fancy stuff?
[13:05] <IntuitiveNipple> Viper111: To begin with, if you want to prevent outgoing *and* incoming you'll need two rules
[13:05] <Ryzzan> arvind_khadri, already did it... didn't work
[13:06] <Ryzzan> arvind_khadri, i think we have to concentrate at the fact that grub doesnt recognize the device!
[13:06] <arvind_khadri> Ryzzan, did you try re-installing grub
[13:06] <IntuitiveNipple> Viper111: To prevent outgoing, match the LAN ethernet interface (eth1 ?) , TCP, and destination port (1863)
[13:06] <danbhfive> anouar: I dunno.  you just mean awn?    I just so happen to have been looking into that stuff, but I find all the graphics annoying
[13:07] <Ryzzan> arvind_khadri, could u try something for me?
[13:07] <illumin8> arvind_khadri, the ideals i tried with him were to change rootnoverify to root, also tried to remove makeactive, and adjusted the chainloader +1 to chainloader (hd0,4)+1 none of them seemed to work
[13:07] <arvind_khadri> Ryzzan, sure... re-install grub...
[13:07] <arvind_khadri> illumin8, did you make him re-install grub?
[13:07] <illumin8> arvind_khadri, thats when you stepped in :)
[13:08] <illumin8> arvind_khadri, so no not yet.
[13:08] <arvind_khadri> illumin8, oh ok... :)
[13:08] <Ryzzan> arvind_khadri, first try this... tell in what device is your ubuntu booting
[13:08] <arvind_khadri> Ryzzan, shoot up the terminal and run sudo grub
[13:08] <Ryzzan> arvind_khadri, that's what i was going to ask you... to get in ur grub shell
[13:09] <Ryzzan> cuz mine doesn't recognize any disk!
[13:09] <danbhfive> illumin8: Ryzzan: that makeactive directive apparently won't work: http://www.gnu.org/software/grub/manual/html_node/makeactive.html#makeactive
[13:09] <arvind_khadri> Ryzzan, ok you got in?? now type find /boot/grub/menu.lst
[13:09] <arvind_khadri> Ryzzan, sorry
[13:09] <arvind_khadri> Ryzzan, ok you got in?? now type find /boot/grub/stage1
[13:09] <illumin8> danbhfive, thanks, i saw it on a forum once, and thought it might work in that case
[13:10] <arvind_khadri> Ryzzan, what does it return?
[13:11] <Ryzzan> arvind_khadri, (hd0,6)
[13:11] <arvind_khadri> Ryzzan, root (hd0,6)
[13:12] <NimaG`> Salut
[13:12] <Ryzzan> arvind_khadri, worked...
[13:12] <Pirate_Hunter> hi my xubuntu has crashed and im getting IO errors with fsck, i am using dsl live cd to try and recover some data to another partition, however when i mount hda it says it doesnt recognise jfs extesion,  is there a command to force the partition to be mounted while ignoring the extension type?
[13:12] <arvind_khadri> Ryzzan, setup (hd0)
[13:12] <Like> ~~~~~*~~~~**~~
[13:13] <arvind_khadri> Pirate_Hunter, i dont think dsl supports jfs... btw sudo mount -t jfs /dev/xxx /msnt
[13:13] <ryzzan_> arvind_khadri, had a problem here
[13:13] <illumin8> dsl does not support jfs for sure.
[13:13] <ryzzan_> arvind_khadri, what now?
[13:13] <arvind_khadri> ryzzan_, what happens? did you do setup (hd0)
[13:14] <Pirate_Hunter> arvind_khadri, ahhh i'll try but hope you're wrong
[13:14] <Viper111> IntuitiveNipple i made it drop everything that port destination is 1863
[13:14] <arvind_khadri> Pirate_Hunter, all the best :)
[13:14] <ryzzan_> arvind_khadri, did it... want me to post result?
[13:14] <arvind_khadri> ryzzan_, no...it should be spitting a lot of text ... after that type quit
[13:15] <ryzzan_> arvind_khadri, did it
[13:15] <ryzzan_> arvind_khadri, what now?
[13:15] <arvind_khadri> ryzzan_, reboot and check
[13:15] <ryzzan_> arvind_khadri, have a question before it...
[13:16] <arvind_khadri> ryzzan_, ask :)
[13:16] <ryzzan_> arvind_khadri, y when in grub shell, if i try /root (hd0,4), it doesnt recognizes it?
[13:17] <arvind_khadri> ryzzan_, root (hd0,x) is used for that partition which has your /boot .... hd0,4 is your windows partition
[13:17] <ryzzan_> arvind_khadri, actually it recognized now!
[13:17] <ryzzan_> arvind_khadri, bless u!
[13:17] <ryzzan_> uhuheuehuehueh
[13:17] <ryzzan_> arvind_khadri, guess it's gonna work now
[13:17] <arvind_khadri> ryzzan_, so is windows booting ??
[13:17] <ryzzan_> arvind_khadri, gonna try it now
[13:17] <ryzzan_> arvind_khadri, i'll be back
[13:18] <arvind_khadri> ryzzan_, ok all the best
[13:18] <illumin8> arvind_khadri, to recap, you had him designate his ubuntu as root, then had him run setup(hd0) to reinstall grub?
[13:18] <ryzzan_> exit
[13:18] <ryzzan_> uehueh
[13:18] <arvind_khadri> illumin8, ya... because the MBR resides at the first boot sector of the drive
[13:18] <illumin8> arvind_khadri, thanks, ill note that for future refrence :)
[13:19] <arvind_khadri> illumin8, its ok :)
[13:20] <Imaginativeone> how do I determine my sharename?
[13:20] <brutus> Hi, how do I move my applications, places, system panel to the left? It's all crammed up to the right...
[13:22] <galatis_> hi
[13:22] <Imaginativeone> how do I determine my servername?
[13:22] <Imaginativeone> galatis: hi
[13:23] <erUSUL> brutus: right click-> unlock and move
[13:23] <galatis_> I am a new user, and I like very much this operation system...
[13:23] <erUSUL> !hi | galatis_
[13:24] <Imaginativeone> galatis: that's great!
[13:25] <Imaginativeone> what do you want to do with it?
[13:25] <burkmat> Viper111, Not sure if anyone already answered, but your flaw is that you expect source port to be 1863.
[13:25] <Imaginativeone> burkmat!
[13:25] <burkmat> Imaginativeone, Oui oui?
[13:26] <Imaginativeone> I can see my ubuntu share in windows, but I can't access it
[13:26] <Imaginativeone> you're french?
[13:27] <burkmat> Imaginativeone, Nope, Swedish. :P Hmm... Why can't you access it?
[13:27] <kane77> how can I tell package manager to ignore certain version of package (eg not offer upgrade for that specific package)?
[13:27] <Imaginativeone> I'm trying to make changes in fstab, but no luck so far
[13:27] <illumin8> Imaginativeone, Ubuntu 8.04.1 browsing of shared authenticated Windows shares is broken according to this webpage http://ubuntuforums.org/archive/index.php/t-918204.html
[13:28] <galatis_> I wanted to install the Zeus(the Greek translation of Slackware), and I find ubuntu more easy than Zeus(at the installation)
[13:28] <Imaginativeone> it says I don't have permission
[13:28] <Imaginativeone> what about 8.10?
[13:29] <illumin8> in the windows share folder, have you given read write permissions to yourself?
[13:29] <Imaginativeone> how?
[13:29] <galatis_> Anyone from Greece??
[13:29] <illumin8> scratch that, your working oppsite, ubuntu into windows?
[13:29] <Imaginativeone> on ubuntu?
[13:29] <ryzzan_> arvind_khadri, same error
[13:29] <ryzzan_> illumin8, same error
[13:29] <ryzzan_> :)
[13:30] <illumin8> Imaginativeone, i need to be more clear, your on ubuntu and working inside windows, or vice versa
[13:30] <illumin8> ryzzan_, gah
[13:30] <Imaginativeone> sorry for the slow typing...got a baby in my arms
[13:30] <ryzzan_> arvind_khadri, anny tip to reinstall grub?
[13:30] <illumin8> Imaginativeone, no rush on this end :)
[13:30] <ryzzan_> arvind_khadri, or just do it...
[13:30] <ryzzan_> ?
[13:30] <arvind_khadri> ryzzan_, i will be back
[13:30] <Imaginativeone> i'm on windows trying to access ubuntu
[13:30] <ryzzan_> arvind_khadri, i'll be waiting
[13:31] <yownanymous> Imaginativeone: huh?
[13:31] <dayo> I'm having issues with gimp. there's a pic, when i click on it in the Open File dialog, the preview is colored. but once the pic is opened, it's grayscale. how can i get it to open colored? :-/
[13:31] <illumin8> Imaginativeone, you get an error simular to "cli_rpc_pipe_open: cli_nt_create failed on pipe \srvsvc to machine XXXXXX. Error was NT_STATUS_ACCESS_DENIED"?
[13:32] <Imaginativeone> not quite
[13:33] <blufade> need help with ubuntu & nvidia
[13:33] <illumin8> Imaginativeone, i would read this posting, it speaks of working with an older version of samba which im unfimilar. http://ubuntuforums.org/archive/index.php/t-918204.html
[13:33] <Passageiro> hi guys
[13:34] <illumin8> hello :)
[13:34] <burkmat> Hello.
[13:34] <durt> !nvidia | blufade
[13:34] <Imaginativeone> \\IMAGINATIVEONE-Dimaginativeone-desktop server is not accessible
[13:34] <blufade> yes durt
[13:34] <blufade> everytime i enable 3d, i cannot seem to get past the bootscreen
[13:35] <Bolin> is it safe to edit the config for irssi while irssi is still running?
[13:35] <nivalis> bolin, yes, use /reload to.. reload
[13:35] <Bolin> ok.. thanks
[13:35] <Passageiro> has anyone configured brightness keys on a vaio laptop ??
[13:36] <Imaginativeone> no
[13:36] <illumin8> Imaginativeone, what are you using to access the shares?
[13:36] <degrit> 'allo
[13:36] <Jeruvy> error: system/capability.h: No such file or directory
[13:36] <Imaginativeone> windows explorer
[13:36] <durt> blufade: can you get to a terminal?
[13:36] <illumin8> Imaginativeone, ok good, try this website for a complete walkthough http://www.simplehelp.net/2007/05/19/how-to-share-files-and-folders-in-ubuntu/
[13:37] <blufade> yep
[13:37] <Imaginativeone> thanks!
[13:37] <illumin8> Imaginativeone, anytime :)
[13:37] <degrit> if I may ask, any hint why I get no sound from some games (i.e. mania drive, dokutsu, stepmania) ? sound works fine in others like xmoto or neverball
[13:38] <[nrx]> aiight
[13:38] <ryzzan_> illumin8, will wine work on adobe cs3?
[13:38] <durt> blufade: take a look at /var/log/Xorg.0.log to see what is happening
[13:38] <ryzzan_> illumin8, if it does, i'm gonna blow windows
[13:38] <ryzzan_> :)
[13:39] <[nrx]> ryzzan_, it doesn't But there's nothing you can do in CS3 that you can't do in Gimp
[13:39] <[nrx]> :)
[13:39] <Passageiro> ryzzan: nrx is right
[13:39] <illumin8> ryzzan_, http://appdb.winehq.org/objectManager.php?sClass=version&iId=15287
[13:39] <ryzzan_> nrx, what about abobe flash?
[13:41] <illumin8> ryzzan_, according to the tester its flawless "Nothing, program ran flawlessly and successfully installed the entire cs3 master collection. "
[13:41] <ryzzan_> hmmmmmmmmmmmmmmmmmmm
[13:41] <ryzzan_> illumin8, gonna try it
[13:41] <illumin8> ryzzan_, :)
[13:42] <[nrx]> if you manage to get it working, let us know?
[13:42] <[nrx]> when I last tried, it failed miserable.
[13:42] <[nrx]> miserably*
[13:42] <[gloom]> hi there. Does anyone know the name pf the package that provides the screen with big logout,restart,turnoff buttons when you click on the power icon in the gnome panel? In the default 8.10 install it appears to me a little vista-like menu when you press the button...
[13:42] <durt> I guess you can't paste in a PM
[13:42] <ryzzan_> nrx, yes... i'll let u know
[13:42] <ryzzan_> illumin8, can't believe "we" r going to fail on grub!
[13:42] <blufade> durt, i've sent u the error log
[13:42] <[nrx]> ryzzan_,  :)
[13:43] <ryzzan_> damn it!
[13:43] <durt> !pastebin | bluefade
[13:43] <durt> blufade: no you got kicked for flooding
[13:43] <illumin8> ryzzan_, we wont, its just safer to do a fresh install :)
[13:44] <illumin8> ryzzan_, of grub that is.
[13:44] <blufade> damn
[13:44] <blufade> does that mean i cant chat anymore ?
[13:44] <ryzzan_> illumin8, reinstalled it...
[13:44] <durt> no, just paste using the pastebin
[13:44] <illumin8> [nrx], when you tried to install adobe cs3 did you install the gecko cab?
[13:44] <ryzzan_> illumin8, i'll b back... ty for everything
[13:45] <illumin8> ryzzan_, anytime :)
[13:45] <blufade> oh ok...wait
[13:45] <btQuark> hello
[13:46] <[nrx]> illumin8, no?
[13:46] <btQuark> i've got some question: how can i retrieve the pci-bus-id of a the usb-controller a usb device is attached to?
[13:46] <illumin8> [nrx], check this page, it might clear up some of the problem :) http://appdb.winehq.org/objectManager.php?bShowAll=true&bIsQueue=false&bIsRejected=false&sClass=version&sTitle=&sReturnTo=&iId=15287
[13:46] <letalis> last time i atempted to install Photoshop cs3 in wine it blew chunks and died after installation
[13:46] <blufade> what next....how will u see that ?
[13:46] <letalis> cs2 i know works
[13:46] <igascream> Hi need some help.. Can't login via GDM . In log :client 4 rejected from local host. Already tried to reinstall drivers and xorg .
[13:46] <blufade> should i give you some link ?
[13:47] <durt> blufade: paste to the paste bin and tell us the URL
[13:47] <faz> anybody could help with resetting my keyboard layout from outside my ubuntu box using live cd.. coz I can't even login to my box after change the keyboard layout.. and keyboard shourtcuts to change layout doesn't work
[13:47] <Jeruvy> btQuark: lsusb
[13:47] <btQuark> duh
[13:47] <blufade> http://pastebin.com/m324d6add
[13:47] <xukun> I have different format of music in my disk, like flac and wav is there a music manager program which can import this folders and put it in one big music directory?
[13:48] <letalis> amarok
[13:48] <Imaginativeone> how do I see my server name?
[13:48] <durt> blufade: ok, lemme take a look
[13:48] <letalis> you tell it where to look, it does the rest
[13:48] <[nrx]> illumin8, yeah, been reading through it :)
[13:48] <alexb92> hey guys, i am unable to use the internet at allon my computer, i was in the processing of updating firefox from the update manager when an error occured, i cant even use synaptic to remove it and reinstall it agan
[13:48] <[nrx]> illumin8, thanks ;)
[13:48] <alexb92> any ideas on how to fix?
[13:48] <xukun> letalis, can amarok realy do that for you?
[13:48] <blufade> thanks man, i'll wait
[13:49] <burkmat> alexb92, Can you ping google.com?
[13:49] <alexb92> yep
[13:49] <btQuark> Jeruvy: thanks, but that is not exactly what i need >00:12.0< USB Controller: ATI Technologies... the marked part is what i need to retrieve but lsub gives me Bus 003 Device 003: ID 046d:c30e Logitech... which does not correlate to the pci-device
[13:50] <burkmat> alexb92, So when you say "use the internet", you mean Firefox?
[13:50] <btQuark> maybe you do have an idea how that correlation can be made?
[13:50] <faz>  anybody could help with resetting my keyboard layout from outside my ubuntu box using live cd.. coz I can't even login to my box after change the keyboard layout.. and keyboard shourtcuts to change layout doesn't work
[13:50] <Imaginativeone> how do I see my server name?
[13:50] <burkmat> btQuark, lspci maybe?
[13:50] <alexb92> firefox, epihpany anything really
[13:51] <alexb92> i can use xtraceroute to ping things and use terminal
[13:51] <[nrx]> Imaginativeone, type "uname -n" or "hostname" in a terminal window
[13:51] <btQuark> burkmat: the first part is lspci output
[13:51] <alexb92> its just i cant use a web browser becoz firefox seems to hog it if u know what i mean
[13:51] <alexb92> and synaptic wont run becoz it dodes initialise or something like that
[13:51] <burkmat> btQuark, Sorry, maybe I'm misunderstanding you... You want to link lspci to lsusb to see what's where?
[13:51] <alexb92> and tells me to type in configure--a into terminal
[13:51] <btQuark> lspci delivers the list of pci-devices, lspci delivers the list of usb devices, they have different bus numberings and i need to know which usb-bus sits on which pci device
[13:52] <alexb92> which i type and it doesnt even do anything
[13:52] <btQuark> burkmat: more or less exactly that
[13:52] <Jeruvy> btQuark: maybe sudo lshw will give you more details.
[13:52] <burkmat> alexb92, What error do you get when trying to start firefox?
[13:52] <illumin8> faz, see this website for the exact commands. http://www.linuxquestions.org/questions/linux-newbie-8/cant-change-keyboard-layout-in-ubuntu-8.04-login-screen-637811/
[13:52] <alexb92> initialisation failes
[13:52] <alexb92> failed*
[13:52] <burkmat> btQuark, ah... been trying to do that myself for a while, but never figured it out. feel free to share if you find a way :)
[13:53] <btQuark> burkmat: lshw looks interesting
[13:53] <btQuark> i will
[13:53] <burkmat> alexb92, `sudo apt-get remove firefox` says what?
[13:54] <sammyF> hey there. I just installed xubuntu8.10 on my Acer Aspire One. Network (eth0) worked fine out of the box before I did all the updates. since I updated and rebooted I can connect to the network by using a fix IP address, but I can't even ping other computers on the network (let alone the router). /etc/network/interfaces is okay, ifconfig tells me eth0 is there and configured (with lots of dropped packets though). any idea?
[13:54] <xukun> letalis, when I have a wav file and I need to see all the rummbers in the wav, can I do that with amarok?
[13:54] <sammyF> xukun: rummbers?
[13:55] <Jeruvy> sammyF: sounds like no route.  Test.  Ping your router, ping another pc on the router, then ping your routers gateway.
[13:55] <burkmat> sammyF, Why not use dhcp?
[13:55] <sammyF> Jeruvy: only thing I can ping is myself.
[13:55]  * |amadeus| pokes less
[13:55] <xukun> sammyF, sorry I mean numbers or songs
[13:55] <Jeruvy> sammyF: then you have no route, check your settings in /etc/network/interfaces and the router
[13:56] <Pirate_Hunter> im running recovery shell but everytime i try mounting /dev/hda2/ it gives it is not in fstab blah blah blah ok how do i force it to mount through recovery?
[13:56] <sammyF> burkmat: nm tries to get a dynamic IP but gives up after some time
[13:56] <xukun> letalis, when I have a wav file and I need to see all the numbers or songs in the wav, can I do that with amarok?
[13:56] <FloodBot1> !netsplit
[13:56] <lorenzosu> How can I avoid being asked for (user) password at each reboot for connecting to WPA WiFi?
[13:56] <[nrx]> love a good old netsplit
[13:56] <sammyF> xukun: you mean the content of the file? use audacity for that
[13:56] <Chousuke> Pirate_Hunter: there's no need to force mount it; your mount command is just incomplete
[13:57] <Pirate_Hunter> Chousuke, hmmm what is missing?
[13:57] <Chousuke> Pirate_Hunter: just "mount /dev/hda2" is not enough
[13:57] <burkmat> sammyF, Hmm... Are you sure everything is working properly on the router end then? Can you connect to anything?
[13:57] <Chousuke> Pirate_Hunter: (note that it's not /dev/hda2/ )
[13:57] <sammyF> burkmat, Jeruvy: router is fine (using it from another computer right now),
[13:58] <Chousuke> Pirate_Hunter: first you need to create a target directory to mount to, for example, /mnt/mydisk
[13:58] <sammyF> burkmat: Jeruvy, and if I reboot the AA1 from the usb stick install, the network actually WORKS
[13:58] <Pirate_Hunter> Chousuke, huh if not what would it be sorry im lost i just want to move data from the partition so i can reformat the disk
[13:58] <sammyF> burkmat: Jeruvy, it jsut went borked after I updated xubuntu tonight :/
[13:58] <xukun> sammyF, yes I think that is what I mean, so I need to use audacity first and then amarok to import files?
[13:58] <Chousuke> Pirate_Hunter: then mount -t filesystemtype /dev/hda2 /mnt/mydisk
[13:58] <Chousuke> Pirate_Hunter: where filesystemtype is the type of the filesystem on the partition
[13:58] <sammyF> xukun: depends on what you want to do with the file. If you want to edit it, yes
[13:59] <Chousuke> Pirate_Hunter: for example, ext3 or vfat
[13:59] <Pirate_Hunter> Chousuke, hmmm is it necessary to mention the filesystem on mount? will try still
[13:59] <Chousuke> Pirate_Hunter: sometimes it can be automounted
[13:59] <Chousuke> er
[13:59] <Chousuke> autodetected*
[13:59] <lorenzosu> How can I avoid being asked for (user) password at each reboot for connecting to WPA WiFi?
[14:00] <Jeruvy> sammyF: then the simple thing is to remove the borked update :)  If not, you're going to need to troubleshoot it from scratch.  your call.
[14:00] <Chousuke> Pirate_Hunter: the crucial thing though is to mention the device file and the target directory to mount to
[14:00] <[nrx]> anyone running ubuntu on a mac?
[14:00] <d_> hello, I'm trying to install ubuntu 8.04 x64 on a dell studio desktop 540, but the installer will not recognize the cd-rom drive (SATA) so the install doesn't proceed (it asks me to load drivers from a floppy, which is kinda hard as 1) I don't have a floppy drive, and 2) I don't know where to get the drivers). Any help?
[14:01] <Myrtti> d_: try usb?
[14:01] <sammyF> Jeruvy: seriously, I wonder if I shouldn't just reinstall it but with ~gnome~ ubuntu, and then just install xfce on top of it ;)
[14:01] <xukun> sammyF, I hard to explain but what I need is that say I have album which is wav file format so its one big file without the names of numbers but I need so to all the names of the songs in say amarok
[14:01] <Myrtti> !usb | d_
[14:01] <calc> d_: what chipset does it have?
[14:01] <rjune_> How do I rerun the dpkg configuration script for ldap? or better yet, where can I find the script?
[14:01] <Jeruvy> sammyF: sure, I've done that.
[14:01] <sammyF> xukun: ahh ... use audacity to split the file in separate tracks then
[14:01] <d_> Myrtti, unfortunately this computer doesn't have boot from USB option (I was kinda shocked)
[14:01] <Owner> guy I need some help
[14:02] <JoeJoe24> I still cannot seem to get my broadcom wireless card to work in a fresh in stall of 8.10
[14:02] <Jeruvy> !ask | Owner
[14:02] <xukun> sammyF, Ok I never used audacity but I will give a tray. Thanks a lot  m8
[14:02] <[nrx]> dontcha hate it when people ask for help, get the help, then leave without thanks
[14:02] <alexb92> soz i havent tried that yet
[14:02] <Pirate_Hunter> Chousuke, the target doesnt work it keeps giving me it is not a file or directory even knowing i made the directory already, is there another way
[14:02] <alexb92> will do next time i boot back in
[14:03] <sammyF> Jeruvy: but it really sounds like a bug in the latest xubuntu updates. I have two AA1 here (sis in law said I should do hers too). Both have the problem.
[14:03] <gordonjcp> [nrx]: almost as much as when people ask for help in a fairly quiet channel at 3am, go "hello? hello?" then "oh well thanks" and leave, all in the space of two minutes
[14:03] <newstar> newstar_bka
[14:03] <giadinhhanhphuc> 2222222
[14:03] <btQuark> burkmat: try lshw -html and view the result in a browser
[14:03] <newstar> 2222
[14:03] <btQuark> pretty much everything you could want
[14:03] <sammyF> Jeruvy, burkmat, thanks anyway .. I'll try to reinstall I guess
[14:03] <Jeruvy> sammyF: it could be.  Check on launchpad.net for any references to your issue.  You could also bug it there if you have more details about it.
[14:03] <giadinhhanhphuc> co ai nguoi viet nam hok
[14:03] <newstar> what
[14:03] <newstar> co
[14:04] <newstar> tui ne
[14:04] <btQuark> burkmat: lshw --businfo pretty much works as well
[14:04] <giadinhhanhphuc> ^^
[14:04] <newstar> ah
[14:04] <giadinhhanhphuc> hen wa'
[14:04] <calc> d_: i think 8.04 is too old to support the Intel G45 chipset in the studio desktop, 8.10 will probably work though
[14:04] <rjune_> gordonjcp: it's not 3am where they are
[14:04] <giadinhhanhphuc> bac cung xai Ubuntu ah`
[14:04] <Owner_> ok here is my problem trying to install having major issues with ubuntu mmirrors
[14:04] <newstar> uh
[14:04] <newstar> ban hoc o dau
[14:04] <Owner_> any help
[14:04] <newstar> ?
[14:04] <Jeruvy> calc: no there are backports
[14:04] <giadinhhanhphuc> minh o kieng giang
[14:04] <giadinhhanhphuc> con ban
[14:04] <d_> calc, hmm, I guess I might as well try that, thanks
[14:04] <newstar> ac
[14:04] <sammyF> Jeruvy: yep, will do that
[14:04] <newstar> xa wa'
[14:04] <burkmat> btQuark, awesome, thanks. :)
[14:04] <giadinhhanhphuc> um
[14:04] <newstar> ban ten la j
[14:04] <giadinhhanhphuc> zay ban o dau
[14:04] <calc> Jeruvy: backports on a install cd?
[14:05] <Jeruvy> !english
[14:05] <giadinhhanhphuc> ban noi di
[14:05] <newstar> minh o ha noi
[14:05] <calc> Jeruvy: 8.04 with backports might work, but where are you going to get a cd with the backports preapplied?
[14:05] <giadinhhanhphuc> minh ten HOAI
[14:05] <Tard> Hi guys, Anyoine know how to make my wifi connect automatically without having to enter the password on the keyring please ?
[14:05] <Jeruvy> calc: hehe no backports on ubuntu.com
[14:05] <giadinhhanhphuc> con ban
[14:05] <newstar> the ban nam may roi?
[14:05] <calc> Jeruvy: read what he said he can't get in the install cd to work
[14:05] <rjune_> what does "con ban" mean?
[14:05] <giadinhhanhphuc> minh la hoc 12
[14:05] <giadinhhanhphuc> ^^
[14:05] <calc> s/in//
[14:05] <newstar> the ah
[14:06] <giadinhhanhphuc> um
[14:06] <giadinhhanhphuc> dang tap xai linux
[14:06] <newstar> ma da dung  roi ah ?
[14:06] <Owner_> I get and fialure  when trying to get files from ubuntu mirrors
[14:06] <Myrtti> !vn | giadinhhanhphuc
[14:06] <newstar> minh cung dang tap dug ne
[14:06] <Jeruvy> calc: I didn't...I simply commented that 'the intel chipset will work with 8.04 if you seek the backports'.  Thats my comment :)
[14:06] <calc> d_: also 8.04.2 might work if you haven't tried it yet
[14:06] <giadinhhanhphuc> um
[14:06] <calc> Jeruvy: ok
[14:06] <giadinhhanhphuc> ban dang xai bac nao zay
[14:06] <newstar> the o tren nay chi chat vay thoi ah  ?
[14:06] <giadinhhanhphuc> Fedora hay Ubuntu
[14:06] <Myrtti> !english | giadinhhanhphuc, newstar
[14:06] <Owner_> any help guys
[14:06] <newstar> hi
[14:06] <chazco> Hi.. does anyone know how to fix the application is still running problem in 8.10? Also, anyone know if/when the WPA-Ent, tkip, mschapv2,peap issue will be fixed?
[14:07]  * calc bbl, my son is attacking my computer
[14:07] <degrit> :D
[14:07] <giadinhhanhphuc> dau con giup do lan nhau de giai quyet nhung rac roi nua ma`
[14:07] <iqson716> nickserv identify master
[14:07] <cyzie> any cli rss reader?
[14:07] <[nrx]> !mac
[14:07] <Tard> Anyone know how to let my wifi connect without having to enter the keyring passwsord ?
[14:07] <[nrx]> hm
[14:07] <newstar> the ah
[14:07] <iqson716> :d
[14:07] <giadinhhanhphuc> um
[14:07] <newstar> lam sao add nick tren ubuntu nay nhi>?
[14:07] <newstar> ???
[14:07] <Owner_> I get and fialure  when trying to get dist files from ubuntu mirrors
[14:07] <[nrx]> wtf?
[14:07] <giadinhhanhphuc> nhung tieng anh do te
[14:07] <giadinhhanhphuc> chan'
[14:07] <Passageiro> Tard: put the keyring password as blank
[14:07] <degrit> any idea why I don't get sound in some games (i.e. stepmania, mania drive, doukutsu) ?
[14:08] <Myrtti> giadinhhanhphuc, newstar: this channel is English only...
[14:08] <shad_> Hi any body please help me out-my wireless is not working
[14:08] <[nrx]> !ask | shad_
[14:08] <Tard> Passageiro,  I tried that but it wouldnt let me connect to the connection
[14:08] <giadinhhanhphuc> Idon't spead ENGLISH
[14:09] <chazco_> Hi.. does anyone know how to fix the application is still running problem in 8.10? Also, anyone know if/when the WPA-Ent, tkip, mschapv2,peap issue will be fixed?
[14:09] <Owner_> anyone please
[14:09] <newstar> hahaa
[14:09] <bazhang> giadinhhanhphuc, /join #ubuntu-vn
[14:09] <Owner_> I get and fialure  when trying to get dist files from ubuntu mirrors
[14:09] <bazhang> newstar, you too
[14:09] <scunizi> !cn | giadinhhanhphuc
[14:09] <newstar> chan nhi
[14:09] <lorenzosu> How can I avoid being asked for (user) password at each reboot for connecting to WPA WiFi?
[14:09] <C3noB1t> tag
[14:09] <giadinhhanhphuc> ok
[14:09] <newstar> ai la ng viet nam day
[14:09] <C3noB1t> ich brauch mal hilfe
[14:09] <bazhang> newstar giadinhhanhphuc #ubuntu-vn
[14:09] <newstar> ac
[14:09] <newstar> ok
[14:09] <newstar> nan?
[14:09] <Myrtti> giadinhhanhphuc, newstar: /join #ubuntu-vn
[14:10] <Owner_> it is a fresh install
[14:10] <scunizi> !de > C3noB1t
[14:10] <bazhang> C3noB1t, #ubuntu-de
[14:10] <C3noB1t> thx
[14:10] <[nrx]> rsync sucks.
[14:11] <[nrx]> translation: I am useless.
[14:11] <Owner_> I get and fialure  when trying to get dist files from ubuntu mirrors for a fresh install
[14:11] <newstar> lalalaa
[14:11] <durt> blufade: what module version are you trying to use
[14:11] <newstar> chat de
[14:11] <newstar> viet nam
[14:11] <Owner_> any help from anyone guys
[14:11] <ubuntistas> does anybody know if kubuntu 8.10 is availble in synaptic manager?
[14:11] <bazhang> newstar, stop
[14:12] <cedric30> Salut
[14:12] <bazhang> newstar, /j #ubuntu-vn
[14:12] <scunizi> ubuntistas: sudo apt-get install kubuntu-desktop
[14:12] <newstar> sac mau
[14:12] <newstar> lalaalaalalalal
[14:12] <Imaginativeone> how do I connect my xp machine to an ubuntu share?
[14:12] <bazhang> Imaginativeone, via samba
[14:13] <Owner_> help guy
[14:13] <ubuntistas> scunizi i don't want to be added other programms from kubuntu in ubuntu
[14:13] <Owner_> I get and fialure  when trying to get dist files from ubuntu mirrors for a fresh install
[14:13] <Imaginativeone> I have samba working...
[14:13] <blufade> how do i find out ?
[14:13] <scunizi> ubuntistas: so you just want the desktop?
[14:13] <Jeruvy> Owner, can you copy and paste the error in ine line and show us, if not use pastebin (see the topic)
[14:15] <chazco> Hi.. does anyone know how to fix the application is still running at shutdown problem in 8.10? Also, how safe is it to run 9.04 (if the wifi issues are fixed)?
[14:15] <blufade> durt , u there ?
[14:15] <scunizi> chazco: 9.04 is alpha and should be treated like that.. could break on the next update. stopping the app? check top for what's running and kill it.
[14:16] <keyton> could anyone tell me good mp3 player like xmms, i like it but he isn't in development for a long time
[14:16] <bazhang> keyton, audacious is the closest available
[14:16] <scunizi> keyton: xmms2, audacious, rhythmbox, amorak, exhaile
[14:16] <giadinhhanhphuc> ai la Viet Nam
[14:16] <keyton> thx i'll try
[14:17] <scunizi> !vt
[14:17] <chazco> scunizi - Ah okay... so better to revert to 7.10 (last version that worked)? Will try checking the process next time shutdown fails, but not sure what to do to fix it (happens quite often)...
[14:17] <keyton> i dont like rhythmbox
[14:17] <bazhang> giadinhhanhphuc, #ubuntu-vn
[14:17] <scunizi> chazco: 7.10? I don't have any issues on 8.10 or 8.04.. if you have to go older 8.04 is about as far back as you want to go.
[14:18] <keyton> audacious is my choice, thx again
[14:18] <chazco> scunizi - With 8.04 and 8.10 I cant connect to some wifi networks, which is a really annoying bug :(
[14:18] <giadinhhanhphuc> Do you have sever web in Viet Nam
[14:18] <bazhang> giadinhhanhphuc, it is here on freenode
[14:19] <burkmat> !vn | giadinhhanhphuc
[14:19] <bazhang> giadinhhanhphuc, type this: /join #ubuntu-vn to enter that channel
[14:19] <scunizi> bazhang: I think he might mean repo mirror
[14:19] <burkmat> Someone needs to educate ubottu.
[14:19] <giadinhhanhphuc> thank you
[14:22]  * gordonjcp glares at wpa_supplicant
[14:22] <gordonjcp> how can I stop wpa_supplicant from running?
[14:22]  * scunizi wonders where ubottu's list of responses are located
[14:22] <jpds> !bot | scunizi
[14:23] <scunizi> thanks jpds
[14:23] <gordonjcp> also trackerd, which seems to run all the time using epic amounts of CPU and memory, and thrashing the disk
[14:23] <gordonjcp> trackerd must die
[14:24] <gordonjcp> I don't think I've ever had a useful answer to a question I've asked in here
[14:25] <mal|lappy> heh
[14:26] <lorenzosu> How can I avoid being asked for (user) password at each reboot for connecting to WPA WiFi?
[14:26] <scunizi> gordonjcp: trackerd use to do that on my laptop. I disabled it in system>preferences>search and indexing.. month later I re-enabled and viola.. it was fixed somehow.. maybe an update.
[14:26] <jonasfa> hey guys, does anybody packaged nvidia's 180.29 for Ubuntu Intrepid?
[14:27] <scunizi> jonasfa: nope.. I installed it on my desktop .. works great for me . much better then the previous drivers.
[14:28] <jonasfa> scunizi: did you installed manually?
[14:28] <erUSUL> !wifi | lorenzosu
[14:28] <scunizi> jonasfa: that's the only way to do it.
[14:28] <jonasfa> scunizi: ok ;) thanks
[14:28] <jonasfa> scunizi: i'll give it a try
[14:28] <mikebeecham> hi guys....I have  Ubuntu and a Mac connected together through a Netegar router.  If I ping the mac from Ubuntu, then I get an average of 15ms.  If I try to ping Ubuntu from the mac, it's in the 600ms range...can anyone help me find out why?
[14:29] <scunizi> jonasfa: if you're going to do it, do it right or your system will give you a lousy resolution
[14:29] <erUSUL> lorenzosu: https://help.ubuntu.com/community/NetworkManager?action=show&redirect=WifiDocs%2FNetworkManager
[14:29] <erUSUL> mikebeecham: may be a problem on the Mac side
[14:30] <mikebeecham> erUSUL: what kind of things?
[14:31] <jonasfa> scunizi: if something get wrong, 'dpkg-reconfigure nvidia-glx-177' will bring the older driver back?
[14:32] <scunizi> jonasfa: give me a sec and I'll pastebin the sequence of install.. couple minutes.. ok.?
[14:32] <jonasfa> scunizi: ok. thank you very much :)
[14:33] <lorenzosu> erUSUL: Thanks for the link but not really helpful :(
[14:34] <erUSUL> lorenzosu: it is
[14:34] <erUSUL> lorenzosu: Automatic Keyring section
[14:34] <erUSUL> lorenzosu: To bypass having to enter the keyring password at every login ... <<< i quote
[14:34] <erUSUL> lorenzosu: crystal clear imho
[14:35] <Elive_user77_en> hi all
[14:35] <burkmat> Hello.
[14:35] <Elive_user77_en> i messed up i think
[14:35] <lorenzosu> erUSUL: It says: "ATTENTION: If you are using Intrepid or later, read the documentation for network-manager here. "
[14:36] <lorenzosu> erUSUL: And on that second link no mention
[14:36] <erUSUL> lorenzosu: just do sudo apt-get install libpam-keyring
[14:36] <erUSUL> lorenzosu: it is enough
[14:37] <ubuntistas> does anybody know how can i convert english pdf files to greek pdf files?
[14:37] <lorenzosu> erUSUL: I get "ibpam-gnome-keyring is already the newest version"
[14:37] <Elive_user77_en> i got ubuntu on the hd i added elive on here as well elive is letting me on fine i try to get on ubuntu an it just sits there
[14:37] <Elive_user77_en> any ideas?
[14:37] <erUSUL> lorenzosu: well i can say that "It Works For Me (tm)"
[14:38] <mikebeecham1> so no-one with any thoughts?
[14:38] <scunizi> jonasfa: http://pastebin.com/m4e1dea5f
[14:38] <axmukher> libpam-gnome-keyring instead of libpam-keyring
[14:39] <lorenzosu> erUSUL: Ok thanks :)
[14:39] <lorenzosu> Anyone else?
[14:39] <jonasfa> scunizi: thank you very much ;)
[14:39] <IntuitiveNipple> mikebeecham: Have you tried pinging the router from both sides... compare the times?
[14:40] <scunizi> jonasfa: standard disclaimers apply.. use at your own risk..worked for me though
[14:40] <Elive_user77_en> i got ubuntu on the hd i added elive on here as well elive is letting me on fine i try to get on ubuntu an it just sits there
[14:40] <Elive_user77_en> any ideas?
[14:40] <IntuitiveNipple> mikebeecham: If you get a long delay for MAC > router you know it's a MAC/router issue
[14:41] <Flare183> !repeat | Elive_user77_en
[14:41] <jonasfa> scunizi: understood ;)
[14:41] <Elive_user77_en> okfine
[14:42] <Flare183> Elive_user77_en: I was just saying
[14:42] <Flare183> Elive_user77_en: Can you bring up a terminal?
[14:42] <Elive_user77_en> na i no im just worried i wont get back in to ubuntu an i need to lol
[14:43] <btQuark> i just experienced some strange stuff
[14:43] <nagyv> hi! could someone help me how to set up my microphone to be recognised and used properly under wine? I use Hardy.
[14:43] <IntuitiveNipple> Elive_user77_en: You'd need to provide a little more accurate description of what you're doing and what reports (if any) you see, "just sitting there" isn't very helpful technically :)
[14:43] <Flare183> Elive_user77_en: I understand that.
[14:43] <Elive_user77_en> im on elive rite now but ubuntu goes to the bar wile you wait then sits at middle
[14:43] <btQuark> i added a network card to my pc and one my dvb-cards dissappeared from the lspci listing
[14:43] <Flare183> nagyv: Sure, I should be able to help
[14:43] <IntuitiveNipple> Elive_user77_en: You start Ubuntu from the initial GRUB menu?
[14:43] <Elive_user77_en> yes
[14:44] <Flare183> btQuark: First can you hear yourself on your own speakers?
[14:44] <Elive_user77_en> it shows elive an ubuntu
[14:44] <IntuitiveNipple> Elive_user77_en: On that menu, there should be a "Recovery" option too... have you tried that?
[14:44] <btQuark> Flare183 that machine has no soundhardware
[14:44] <Elive_user77_en> no i didnt know what it was for an didnt want to mess anything up
[14:44] <Flare183> btQuark: Oh, ok. Well, that might be the only way that you can actually get the mic working..
[14:44] <nagyv> Flare183: then, be so kind please! :) For the moment, I have wine set for ALSA with winecfg, and the Test Sound works well. As well I can record my voice with the Gnome sound recorder. So it's really only wine's sound in that is a problem
[14:45] <Flare183> oops wrong person
[14:45] <Flare183> btQuark: Sorry wrong nick my fault
[14:45] <btQuark> Flare183 actually i dont know what a mic has to do with dvb hardware?
[14:45] <btQuark> no probs
[14:45] <IntuitiveNipple> Elive_user77_en: If you boot to the recovery console you'll also see all the kernel boot messages that the usual Ubuntu splash screen hides from you. That might help you see an error report
[14:45] <Sylphid> btQuark, the only thing i can think of that would cause a problem like that would be an IRQ conflict
[14:45] <theunixgeek> How can I get a Windows Media streaming video to work in Ubuntu?
[14:46] <Elive_user77_en> ok ill try that thanks
[14:46] <Sylphid> btQuark, anything usefull in dmesg?
[14:46] <Elive_user77_en> back soon thanks Flare183
[14:46] <theunixgeek> that is, to play
[14:46] <theunixgeek> !restricted
[14:46] <Jeruvy> IntuitiveNipple: wouldn't the kernel log have the messages too?
[14:46] <btQuark> Sylphid currently looking
[14:46] <Elive_user77_en> IntuitiveNipple, thanks
[14:47] <Flare183> nagyv: Alright. First thing, can you give me a screen shot of your winecfg window with the "audio" tab opened?
[14:47] <Flare183> Elive_user77_en: ok
[14:47] <bazhang> theunixgeek, website?
[14:47] <pleasuredom> !adobe flash
[14:47] <IntuitiveNipple> btQuark: It's possible the two PCI slots share interrupts and are conflicting. Sometimes simply shuffling the PCI cards around can sovle such issues.
[14:47] <Flare183> !flash | pleasuredom
[14:47] <Like> hiii
[14:47] <Flare183> !hi | Like
[14:47] <IntuitiveNipple> Jeruvy: If the system will boot to a point where it is accesible, yes. I suspect even the Recovery boot may hang, but at least the messages will be on-screen
[14:48] <Jeruvy> IntuitiveNipple: good to know, thanks.
[14:48] <nagyv> Flare183: how can I share the screenshot with you?
[14:48] <Flare183> nagyv: You can upload it with this website: http://imagebin.ca
[14:49] <IntuitiveNipple> Jeruvy: The other option is to manually edit the regular Ubuntu boot option in the GRUB menu, changing the 'kernel' options to remove "quiet splash" and replacing with "debug"
[14:49] <scunizi> jonasfa: here's the official link just in case http://help.ubuntu.com/community/NvidiaManual
[14:49] <nagyv> Flare183: http://imagebin.ca/view/DRnieEcx.html
[14:49] <btQuark> Sylphid: yup, irq conflict was what i thought of too ,and no dmesg has nothing sensible
[14:49] <btQuark> its just plain gone
[14:50] <btQuark> hm, that would need more shuffling, and shuffling to their old position
[14:50] <IntuitiveNipple> btQuark: Does it re-appear if you remove the network adapter?
[14:50] <btQuark> well i'll might just use only one pci-card
[14:50] <pmilos> can anyone help me with the following - I have external monitor that is well set up (resolution is correct, works well). However if I log out, my internal monitor (on laptop) is on while external is on. I would like to completely disable laptop monitor form running.
[14:50] <Flare183> nagyv: Have you tried using the OSS driver?
[14:50] <btQuark> IntuitiveNipple: I could try. but that would involve major working on a rack
[14:50] <IntuitiveNipple> btQuark: I once spent 2 days shuffling 5 cards around to find the permutation that worked without the sound-card stuttering :)
[14:51] <btQuark> *shudder*
[14:51] <IntuitiveNipple> btQuark: Indeed, but after that, the machine lasted 4 years or more :)
[14:51] <nagyv> Flare183: not yet. I've read that for that I have to kill pulseaudio. Is this true?
[14:52] <Flare183> nagyv: hmmm I don't think so. But I'm not 100% sure either.
[14:52] <iPhier> umm. how do i switch to LILO instead of GRUB.
[14:52] <iPhier> i am unable to use XFS because of this
[14:53] <IntuitiveNipple> nagyv: I came in late, but I think your issue was no sound input on wine with pulseaudio? Using Hardy I had pulseaudio and wine working fine - I prefer using Windows GoldWave to Audacity
[14:53] <Flare183> !lilo | iPhier
[14:53] <pmilos> if someone could have a look http://pastebin.com/d2f29bbae
[14:53] <nagyv> IntuitiveNipple: then could you tell me your exact winecfg settings, please?
[14:53] <pmilos> this is the way I editied the xorg.conf
[14:53] <Imaginativeone> how do I start SWAT?
[14:54] <iPhier> ubottu: got it. but i see XFS doesnt work well with GRUB. google says that XFS is a much superior FS than ext3
[14:54] <Flare183> Imaginativeone: sudo /etc/init.d/swat start
[14:54] <Imaginativeone> thanks!
[14:54] <phnom> I need help with resuming from suspend, the computer starts to resume but then continues to suspend again. It's an acer aspire 2930z
[14:54] <Flare183> Imaginativeone: np
[14:54] <phnom> Hibernate works just fine
[14:54] <btQuark> ZFS is the only acceptable filesysztem
[14:54] <btQuark> ;-)
[14:54] <pmilos> please..... anyone.....
[14:54] <Flare183> phnom: Have your reported a bug yet?
[14:55] <iPhier> btQuarr:ZFS? Solaris?
[14:55] <Like> happy san valentin
[14:55] <JoeJoe24> hi guys. to get my wireless working I have to install this patch. http://www.cenolan.com/broadcom-wl/ how do I do that?
[14:55] <Flare183> pmilos: Where did the "bar" stuff come from
[14:55] <phnom> Flare183, Uhm, no...
[14:55] <IntuitiveNipple> nagyv: Wine is jus set to use ALSA, nothing special required.
[14:55] <Like> post at MyQsl.Org :)
[14:55] <Flare183> phnom: That would be a good idea
[14:55] <pmilos> xrandr
[14:56] <pmilos> I just gave names
[14:56] <pmilos> to identify monitors
[14:56] <pmilos> with what I got from output of xrandr
[14:56] <Flare183> !enter | pmilos
[14:56] <nagyv> IntuitiveNipple: Flare183: and does either of you know about an application where I could test my mic under wine? Something simple, like a basic sound recording program?
[14:57] <IntuitiveNipple> nagyv: I'm biased but I'd suggest the shareware version of GoldWave :)
[14:57] <Like> hey that's ann good idea how i can compile
[14:57] <JoeJoe24> i need help installing a patch., I dont know how to do it :(
[14:57] <Flare183> !compile | Like
[14:57] <nagyv> IntuitiveNipple: could you check your Wave In Devices setting in winecfg / audio / Alsa Driver?
[14:58] <pmilos> ubottu: I got the output from xrandr and then I just gave names to it so that monitors are recognized. There is an option in there where I disable the internal monitor which is "bar:
[14:58] <Imaginativeone> command not found
[14:58] <xaxo> como conectar chat de terra en Xchat
[14:58] <Pilot_51> Is there any way to do cd or equivalent in a launcher command?
[14:59] <pmilos> ubottu: however internal monitor turns on at certain moments (like boot) or if I log out - then both monitors are on
[14:59] <scunizi> Pilot_51: typically you just enter the path
[14:59] <bazhang> xaxo, /join #ubuntu-es
[14:59] <Flare183> !es | xaxo
[14:59] <Pilot_51> I'm using wine and the only way I can launch this exe is if I'm already in the directory where it resides
[14:59] <Elive_user77_en> im back
[14:59] <sleepingcreep> salve a tutti
[15:00] <Elive_user77_en> IntuitiveNipple, ?
[15:00] <Pilot_51> This command works in terminal but not the launcher: cd "/media/stuff/Program Files/EA GAMES/Battlefield 1942" && padsp wine bf1942.exe +restart 1
[15:00] <sleepingcreep> ho bisogno di sapere che scheda video monta il pc dal quale sto scrivendo, il proprietario non se lo ricorda... c'è un comando a terminale per saperlo?
[15:00] <Flare183> Pilot_51: Its your path name
[15:00] <IntuitiveNipple> nagyv: I can't, sorry. I'm testing Jaunty right now and don't have it installed.
[15:00] <IntuitiveNipple> Elive_user77_en: ?
[15:00] <Myrtti> !it | sleepingcreep
[15:00] <scunizi> !it | sleepingcreep
[15:00] <Flare183> !english | Elive_user77_en
[15:01] <Elive_user77_en> i go rite to busybox (ash) what ever that is there was no recover just elive an 2 ubuntu an a memory test
[15:01] <scunizi> Flare183: how's he going to understand that?
[15:01] <Pilot_51> wine /media/stuff/Program\ Files/EA\ GAMES/Battlefield\ 1942/bf1942.exe does not work
[15:01] <sleepingcreep> Myrtti, excuse me... i've automatically acceeded to english channell... -.-
[15:01] <nagyv> IntuitiveNipple: no problem
[15:01] <Pilot_51> even in terminal
[15:01] <Elive_user77_en> 2 diferent kernals thats why theres 2
[15:02] <nsadmin> scunizi he'd understand if he also spoke some english...
[15:02] <fergal32> hello to all
[15:02] <IntuitiveNipple> Elive_user77_en: OK, the 'busybox' is a limited shell that is launched when the kernel can't find the root device, usually because something has been changed on the disk.
[15:02] <Flare183> scunizi: exactly (no sarcasm intended)
[15:02] <Flare183> !hi | fergal32
[15:02] <scunizi> nsadmin: noticed that.. sorry Flare183
[15:02] <fergal32> anybody any luck with wol on ubuntu 8.10?
[15:02] <codazoda> Hi.  My WiFi adapter (rt2500) starts at 1Mb/sec after waking up from sleep or reboot.  I run "sudo iwconfig wlan0 rate 54M"  to speed it up.  Tried adding that to rc.local, but it's still 1Mb when I start up.  Where should I add that command in order for it to happen automatically on wake?
[15:02] <fergal32> hi flasre183
[15:03] <Elive_user77_en> so what do i do to get on my ubuntu?
[15:03] <fergal32> hi ubotto
[15:03] <Flare183> scunizi: No problem
[15:03] <Flare183> Elive_user77_en: Try reinstalling GRUB
[15:03] <nsadmin> fergal32: it's better if you talk about your luck with it, specific informative concise complete
[15:03] <Pilot_51> If I'm outside the directory of the exe when I try launching it with full path, I get this: "Warning: could not find DOS drive for current working directory '/', starting in the Windows directory."
[15:03] <IntuitiveNipple> Elive_user77_en: It is possible the Elive installation has changed/over-written part of the Ubuntu installation
[15:04] <fergal32> nsadmin: what specific information? like lan etc.?
[15:04] <Elive_user77_en> ok um how do i straighten it out im not a pro like you guys lol
[15:05] <IntuitiveNipple> Elive_user77_en: The possibilities are almost endless - it's not something I'd want to try to sort out remotely.
[15:05] <codazoda> Where should I add a command in order for it to happen automatically on wake?  Should /etc/rc.local work?
[15:05] <Elive_user77_en> great
[15:05] <codazoda> Or, does that only run after a reboot?
[15:05] <nsadmin> fergal32: so far there was no information at all... adding some would be a good start
[15:06] <Elive_user77_en> brb
[15:06] <nsadmin> information about... what you're trying to do, how you're doing it, what you're expecting, what's happening instead...
[15:07] <fergal32> codazoda: try adding ethtool -s eth0 wol g to your rc.local
[15:07] <fergal32> but that didn't work 4 me :D
[15:07] <mib_8i0ql8> I have problem with totem in Hardy, and I think it's related to alsa(?). While playing music with totem, mouse clicks cause noise and buzz in the sound. Sound Card is  C-Media CMI8738.
[15:07] <alexmart> hello, ubuntu detects an unknown display besides my laptops , how do I remove the unknown display ?
[15:08] <ubuntistas> in kubuntu kdm or gdm?
[15:08] <scunizi> kdm
[15:08] <IntuitiveNipple> Elive_user77_en: ?
[15:08] <fergal32> nsadmin: i'm running ubuntu 8.10 64bit, my network card is a RTL8111/8168B
[15:09] <fergal32> tried adding ethtool -s eth0 wol g to my rc.local and enabled wol in my bios
[15:09] <Elive_user77_en> huh
[15:10] <codazoda> fergal32: I'm using wlan0, instead of eth0.  Not sure if ethtool will work with wireless devices.  I could certainly try that.
[15:10] <fergal32> and i did /etc/init.d/hal changing NETDOWN=yes to no
[15:10] <fergal32> but no scuccess so far
[15:10] <codazoda> But, I know the command that works already.  I just can't get it to work from /etc/rc.local for some reason.
[15:10] <Elive_user77_en> IntuitiveNipple, ?
[15:10] <fergal32> codazoda: hm, not sure since i don't use wireless ;-)
[15:10] <IntuitiveNipple> Elive_user77_en: http://paste.ubuntu.com/118059/
[15:11] <mib_8i0ql8> I have problem with totem in Hardy, and I think it's related to alsa(?). While playing music with totem, mouse clicks cause noise and buzz in the sound. Sound Card is C-Media CMI8738. Anybody can help?
[15:11] <Elive_user77_en> whats that?
[15:11] <scunizi> mib_8i0ql8: not the best answer but install vlc or mplayer
[15:11] <codazoda> I'm going to try adding "sleep 15" before my "iwconfig" line, see if it has to be connected first...
[15:12] <alexmart> anyone has any idea why ubuntu 8.10 detects an extra "unknown" display ?
[15:12] <fergal32> mib: or try using totem-xine which sometimes helps
[15:13] <mib_8i0ql8> mib_8i0ql8: Thanks, but I want to solve the problem. I thinks it's not related directly to Totem, but it's about configurations that Totem is using, and I want to make it work.
[15:13] <fergal32> codazoda: and try this /etc/default/acpi-support in line STOP_SERVICES add networking to it
[15:13] <fatbrain_t> This is madness :). I've done it all,  nothing seems to connect my bluetooth Apple Wireless Keyboard. I manange to connect it once using bluez-compat hidd tool, but after reboot even that didn't work no more. What to do? :)
[15:14] <IntuitiveNipple> mib_8i0ql8: Do you hear the same interference using other media players?
[15:15] <mib_8i0ql8> IntuitiveNipple: I tried audacious and it's OK, but I couldn't find anything usefull from it's configurations that I can use in totem.
[15:16] <IntuitiveNipple> mib_8i0ql8: Hmmm, is the C-Media chipset built onto the motherboard?
[15:16] <IntuitiveNipple> mib_8i0ql8: I've known several on-board sound chipsets that suffer various degrees of interference due to lack of adequate shielding.
[15:16] <Jufis> does amaroK work on ubuntu?
[15:16] <scunizi> Jufis: yes
[15:16] <Jufis> without KDE?
[15:17] <scunizi> yes
[15:17] <IntuitiveNipple> mib_8i0ql8: Although, your description sounds more like an issue with interrupts or PCI latency
[15:17] <mib_8i0ql8> IntuitiveNipple: I'm not sure, it's listed on lspci's output.
[15:17] <Jufis> thank you scunizi  :)
[15:17] <commander_> hi guys. how do i put my icons back on the top panel?
[15:18] <commander_> like wi fi signal,bluetooth,im,etc
[15:18] <mirak> hi
[15:19] <mib_8i0ql8> IntuitiveNipple: I think it's not related to shielding, cause it's ok in audacious, but if your second guess is right, then it's who's fault? Alsa?
[15:19] <fergal32> commander: right klick on panel and choose add to panel
[15:19] <jtaji> commander_: add "notification area" applet
[15:19] <IntuitiveNipple> mib_8i0ql8: No, that'd be a hardware issue, sometimes resolved by shuffling the PCI cards in the slots to change their order.
[15:19] <mirak> I have a problem with a TechnoTrend C1500 dvb card remote. The problem is that when I use the remote, it interacts with Gnome. If I push power button, it shows power menu, and I can navigate in the menu with it, however I don't want this !!! Anyone knows how I could disable that ?
[15:20] <codazoda> How do I launch something on wake from sleep?  Will /etc/rc.local work?
[15:20] <commander_> thru terminal?
[15:21] <mib_8i0ql8> IntuitiveNipple: make sense when audacious has not this problem?
[15:21] <Dr_willis> codazoda,  no rc.local just gets ran at boot up.
[15:21] <JohnAlpha> commander_: You should be able to just right-click up there and go through "Add to Panel"
[15:22] <codazoda> Dr_willis: Perfect, that's what I suspected.  Is there another place I should put a command that needs to run on wake?
[15:22] <Dr_willis> codazoda,  proberly. but i dont know of it off hand. I recall some similer things with hdparm in some docs/wiki pages i read ages ago.
[15:22] <philipp_> hi
[15:23] <Like> att
[15:23] <IntuitiveNipple> mib_8i0ql8: No, it doesn't... the other possibility is the media player is using up all the CPU time (or memory) and is causing swap-file use or delays for other processes
[15:23] <philipp_> is there a command to run the whole setup of language, locale, timezone etc. after the setup of a ubuntu machine again (preferably on the console)
[15:23] <Like> problem with wine
[15:24] <Jufis> scunizi, what packet should I install if I want to install amaroK?
[15:24] <Like> wine closed inesperate bug about this graphic card how i can solve the program and close the daemon ?
[15:24] <mib_8i0ql8> IntuitiveNipple: Hmmm, let me see.
[15:24] <scunizi> Jufis: are you using synaptic or add/remove? or terminal?
[15:24] <SammyF> Jufis: just select amarok from synaptic, it will add the packets you need
[15:24] <Jufis> SammyF thanks
[15:25] <Like> any one can tell me the comand too close wine
[15:25] <Like> ?
[15:25] <Jufis> SammyF, but that way it installs some kde libraries, right? I dont want to install KDE
[15:25] <commander_> what abbout bluetooth
[15:25] <Nickyy2> Is there a command line utility that checks how much RAM is available and how much is used?
[15:25] <scunizi> Jufis: likek SammyF said.. it will pull in a lot of deps.
[15:25] <kitche> Like: you just close the program that wine is running
[15:25] <mib_8i0ql8> IntuitiveNipple: it's not :(
[15:25] <zacken_> philipp_: man dpkg-reconfigure
[15:25] <commander_> icon.it's not on the list?!
[15:26] <tcleval> hi i wanna know where or how can i download all apt packages at once to burn on dvd for later installation?
[15:26] <philipp_> Nickyy2: top shows it
[15:26] <Like> is a recurrent bug kitche
[15:26] <Jufis> scunizi, but it won't install KDE, right?
[15:26] <nivalis> Nickyy2, try free
[15:26] <scunizi> Jufis: no. just the dependancies needed for amorak
[15:26] <Nickyy2> thanks philipp_, nivalis
[15:26] <kitche> Like: so kill wine-server next time ask how to kill wine not how to close it
[15:26] <Jufis> scunizi, okay, thanks
[15:27] <philipp_> zacken_: thanks, but i need the package names too :-( i already found "locale" and "tzdata"....
[15:27] <Frijolie> everyonce in a while my mouse cursor will jump to random places on the screen in a split second
[15:27] <Frijolie> how do you fix that?
[15:27] <Frijolie> it's a USB mouse
[15:27] <wolter> hey carpii, are you there?
[15:28] <codazoda> Uhg.  I cannot figure out how to execute commands automatically on wakeup from sleep.  Any ideas?
[15:28] <IntuitiveNipple> mib_8i0ql8: I just found this: http://ubuntuforums.org/showthread.php?t=400762
[15:28] <codazoda> I apparently don't know the correct terms to Google.
[15:29] <jamal> hello
[15:29] <jamal> is it possible to install an dhcp server on linux
[15:30] <jamal> and do multiple scope for vlans ?
[15:30] <Like> soo kill using pid any idea about this ?
[15:30] <Frijolie> a lively bunch today!
[15:31] <sugi> ﻿I need to install Diablo 2 LOD.  I have instaled the first Diablo 2 and now I need to instal LOD exp, but when I pop the cd in.  Ubuntu doesn't see anything on the cd.  I tried coping the whole cd to a folder within Windows (I'm at a lan party right now :p) and that doesn't work because it has copy right protection and says I need to input the cd.  What should I do?
[15:31] <mib_8i0ql8> IntuitiveNipple: Thanks, but I have seen it, and no help.
[15:32] <SammyF> anybody here who was able to create a USB install?
[15:32] <sigjuice> Hi.  I managed to install ubuntu 8.10 on an old laptop using mini.iso.
[15:32] <jamal> §
[15:32] <SammyF> the "create USB Install" application keeps on crashing when installing the bootloader :/
[15:32] <jamal> !seen jamal
[15:32] <sigjuice> what should I do to install gnome now?
[15:32] <jamal> !seen jamal
[15:32] <zacken_> philipp_: "dpkg-reconfigure locales" do many changes
[15:33] <chawarma> Hi
[15:33] <sigjuice> will apt-get install ubuntu-desktop do it?
[15:34] <notwist> what's the best code editor for text based linux? like nano but with colors basically
[15:34] <SammyF> notwist, emacs? ;)
[15:34] <jrib> notwist: vim and emacs are the big ones
[15:34] <jrib> notwist: by the way, nano has colors...
[15:36] <notwist> i just don't want something scary, like VI that takes 6 months to learn
[15:36] <SammyF> notwist: then use emacs
[15:36] <notwist> ok thanks
[15:36] <SammyF> notwist, you should be done in 5 :P
[15:36] <jrib> notwist: then stick with nano...  Though if you run vimtutor, you should pick it fairly quickly...
[15:36] <jamal> or gedit :)
[15:36] <notwist> jamal: text based linux :P
[15:36] <Noodels> I've downloaded and booted an 8.10 ubuntu i386 live cd. I'm on step 4 of the install. I can't work out how to resize (but not delete) the existing ntfs partition (which has been defragmented by the way). The version of gparted that comes with it is 0.3.8, can the 8.10 live cd even resize ntfs partitions?
[15:36] <ramirand_> SammF: :)
[15:37] <kitche> Vi only takes 5 minutes to learn for basic editting needs
[15:37] <quizme> what's a good text editor for programming on ubuntu ?
[15:37] <notwist> quizme: lol
[15:37] <IntuitiveNipple> quizme: What kind of programming? language, purpose?
[15:37] <chawarma> 8.10 is the last version of Ubuntu ?
[15:37] <jrib> !editor | quizme
[15:37] <ramirand_> SammyF: emacs isn't just an editor, it's a way of life!
[15:37] <SammyF> quizme: geany in my opinion
[15:37] <notwist> quizme: i just asked that a minute ago
[15:37] <Noodels> chawarma: As far as I know.
[15:37] <quizme> i'm using rails and flex
[15:37] <chawarma> ok
[15:37] <jamal> dreamweaver with wine :)
[15:37] <jrib> quizme: with the exception of nano and mousepad on that list, they're all good
[15:37] <notwist> !html
[15:38] <jamal> dreamweaver and wine
[15:38] <SammyF> anybody got an idea why I can connet to the network (static IP) in xubuntu, but not ping ANYTHING apart from myself?
[15:38] <jamal> works fine for me
[15:38] <Marfi> SammyF, wired or wireless?
[15:38] <SammyF> jamal, dreamweaver is a scourge that needs to be eradicated
[15:39] <SammyF> Marfi: wired.
[15:39] <sigjuice> how about geany for a test editor for programming?
[15:39] <Noodels> It's odd, some people apparently can resize ntfs partitions on various websites revealed by google, others can't.
[15:39] <RussM> SammyF: Sure you're the only host with that IP?
[15:39] <IntuitiveNipple> SammyF: Probably not set a default route?
[15:39] <jamal> why?
[15:39] <sigjuice> geany.org
[15:39] <Marfi> SammyF, man ifconfig from terminal, and all of the info should be in there for ya. =)
[15:39] <jamal> Sammy why?
[15:39] <SammyF> Marfi: it worked prior to installing the updates, stopped working afterward
[15:39] <SammyF> RussM: yeah
[15:39] <SammyF> IntuitiveNipple: how do I do that?
[15:40] <RussM> SammyF: Pastebin the output of "route"
[15:40] <notwist> If I'm using Irssi and I have a domain that points to my IP-how do I use it in irssi? i've tried the -h and --hostname= switch but I still get my "normal" host revealing my ISP
[15:40] <SammyF> RussM: one sec... I'll have to copy it by hand (no network .. Rmember;)
[15:41] <lianimator> anyone else trying to install nvidia driver 180.29? X does not start after installation
[15:41] <RussM> SammyF: DOH! Sorry! I can pastebin mine if you want to compare...
[15:41] <judgepg> Hi folks, I am trying to mount my USB external drive in fstab.  When I add the line, and run mount -a the drive is mounted for root, but as a non-root I cannot read, but cannot write to it.  Any thoughts?
[15:42] <btl> anyone have experience getting hd-dvd movies to work in ubuntu? i have read the restricted formats community page but still can't even see the files on the hd-dvd
[15:42] <sigjuice> SammyF: pinging yourself just means that your loopback interface is up.  Can you reach remote systems any other way besides ping?
[15:42] <notwist> judgepg: maybe use chmod to change the rights for your user
[15:42] <Marfi> judgepg, make a folder on the drive, chmod it so you can write to it
[15:42] <quizme> does eclipse work on ubuntu?
[15:42] <Marfi> judgepg, i have to do that with mine
[15:42] <Marfi> quizme, yes
[15:42] <judgepg> notwist, I cannot chmod a mounted partition
[15:42] <notwist> judgepg: why? sudo?
[15:42] <judgepg> Here is my fstab line: /dev/sdb1 /media/HDD vfat defaults,user,dmask=027,fmask=137 0 0
[15:42] <SammyF> RussM: http://pastebin.com/m7114ee4c
[15:43] <Marfi> judgepg, sudo chmod 777 /media/HDD
[15:43] <SammyF> sigjuice: nope. only myself
[15:43] <Noodels> Why do I not get this screen on step 4 of 7 during install? http://platonic.techfiz.info/2008/10/31/gparted-on-ubuntu-810-sleek-and-powerful/ I get the choice to use entire disk, largest contiguous free space or manual.
[15:43] <SammyF> sigjuice: everything else is "host not reachable" (thus the static IP btw. can't reach teh router for DHCP)
[15:43] <sigjuice> SammyF: then you are not connected to your network at all.
[15:43] <gajop> is there a way to configure a static ip in interpid, using the gnome network manager that comes with the installation, instead of changing /etc/resolve.conf and /etc/network/interfaces , even though I fixed it here, I'd like to be able to do it through GUI in the future
[15:44] <judgepg> Marfi, that will not work
[15:44] <SammyF> sigjuice: actually I am
[15:44] <SammyF> sigjuice: I rebooted from the USB stick, and I had a connection THERE
[15:44] <Marfi> judgepg, unmount it, chmod the folder, then remount it
[15:44] <Marfi> judgepg, them make a directory inside of it, chmod the directory, and write to that
[15:44] <judgepg> Marfi, I did that, but when you mount the partition, it changes it
[15:44] <notwist> Noodels: have you googled the problem?
[15:44] <quizme> how do you install the JVM ?
[15:44] <Seronis> how do i totally dismantal mousekeys?  it keeps turning on randomly and i loathe having to waste my time to turn it off manually when it shouldnt ever activate in the first place (and NO, im NOT using the key combo, it does this usually when i've used vnc recently)
[15:44] <judgepg> Marfi, I think the issue is in the fstab line of the mount
[15:45] <SammyF> sigjuice: it looks like soemthing in the xubuntu update (clean install!) screwed up my network settings :/
[15:45] <judgepg> Marfi, so if I was to umount the partition, it's chmodded to 777.  When I mount the partition, its 750
[15:45] <chawarma> With "Ubuntu USB desktop image creator" we can create a permanent live USB ?
[15:46] <SammyF> sigjuice: and just for the fun of it, I tried putting a "ubuntu" (not xubuntu) usb install to reinstall everything and that crashed
[15:46] <sigjuice> SammyF: so you are running off your xubuntu install and you can't get on the network?
[15:46] <RussM> SammyF: Sorry, I got pulled away (it IS Valentine's Day, I thought it best to answer the call... :) )
[15:47] <zicho> mååp
[15:47] <judgepg> Marfi, I think I need to reboot, maybe that will help.  Either there's an issue with the fstab line, or a reboot is required.  If all else fails, I'll try pmount
[15:47] <SammyF> sigjuice: no. I'm on my other comp right now. I installed xubuntu on an Acer Aspire ONe yesterday (thus the need for the USB install), worked perfectly, I did the updates tonight, this morning, after reboot, my wired network was gone
[15:47] <SammyF> RussM: np :)
[15:47] <Marfi> judgepg, sounds good
[15:48] <uselessalways> I get "Unhandled error, aborting" every time I try to burn a data dvd, regardless of the data or write speed. How do I fix this?
[15:48] <charles> hiya, two quick questions regarding using window managers/desktop environments other than the default one: if I use something such as Ion, what can I use to connect to wireless on startup? also, how can I have the "nice" Fx widgets without having to run xfdesktop or nautilus? any suggestions are appreciated :)
[15:48] <SammyF> sigjuice: so I rebooted from the USB stick just to check if I had ANY connection, and it worked.
[15:48] <keystr0k> What's the best solution for recording screencasts in Ubuntu?
[15:49] <uselessalways> keystr0k: xvidcap is popular and established for that
[15:49] <jrib> !screencast | keystr0k
[15:49] <philipp_> what is the replacement package for "localeconf"? i can't find it anymore on Ubuntu Hardy and later....
[15:51] <RussM> SammyF: Routes looked good, assuming your interfaces is eth0, and your router is 192.168.1.1. Looks like I have to run, sorry I can't be more help. Good luck!
[15:51] <sigjuice> SammyF: what does ifconfig say?
[15:52] <SammyF> sigjuice: I'll try to copy that to pastebin .. might take a few mn as I have to type it in :/
[15:52] <mib_8i0ql8> IntuitiveNipple: I tried Mplayer, when it's configured to use alsa in it's preferences, it has the same problem, and when it's using PulseAudio, it works fine. now I want to configure Totem to use PulseAudio. I tried form gstreamer-properties but it gives me error when I select PulseAudio beside Alsa. How can I do that?
[15:52] <keystr0k> jrib, thank you... :)
[15:52] <IntuitiveNipple> SammyF: copy into a file and transfer with a USB stick :)
[15:52] <keystr0k> uselessalways, thank you too
[15:52] <SammyF> IntuitiveNipple: you're a genius ;)
[15:52] <sigjuice> IntuitiveNipple: good old sneakernet :)
[15:52] <IntuitiveNipple> mib_8i0ql8: not entirely sure
[15:53] <IntuitiveNipple> SammyF: well, ya know...... *preens self*
[15:53] <Macer> ugh. my artigo won't get here til thursday
[15:53] <Macer> what crap
[15:53] <harlemdavvey> guys my desktop stopped working
[15:53] <invisibleninja> Microphone not wokinf in Intrepid Ibex. Is it a known problem?
[15:53] <Macer> this is what i get for ups grounding it
[15:53] <harlemdavvey> what can i do..??
[15:54] <quizme> !code | quizme
[15:55] <ChickenGirl> can anyone help me set up my mic or point me to a howto? I just can't seem to get it to work
[15:55] <SammyF> sigjuice: IntuitiveNipple: http://pastebin.com/m1ab6d59e
[15:55] <codazoda> If I put something in /etc/pm/suspend.d, it will execute when I suspend the computer.  But, there doesn't seem to be a similar wakeup script there.  Does anyone know what the wakeup script should be called?
[15:55] <letalis> ChickenGirl: have any idea what the sound chipset is?
[15:55] <fwaokda> I am trying to turn off my touchpad's click (i want to only be able to click by the actual button not the touchpad) but i dont see the option in the mouse settings... can someone help?
[15:55] <ChickenGirl> no, how do I check?
[15:55] <ociugi> i notice from the packages name that have a "common" word suffix. what is a "common" means?
[15:55] <harlemdavvey> i'm unable to click on my desktop.. files are not going to be selected and launched.. it is like if the desktop is "freezed" ... what can i do to solve the problem? is there any way to solve the situation for exemple is it possible to "restart" the desktop functionality? :)
[15:55] <codazoda> Sorry, it's /etc/pm.d/sleep.d
[15:56] <letalis> type lspci -v | less in a terminal
[15:56] <IntuitiveNipple> SammyF: Now do "ip route show"
[15:56] <quizme> how can i tell if i'm using KDE or GNOME ?  I've got the cube thingy installed
[15:56] <codazoda> Looking for something like /etc/pm/wake.d
[15:56] <sugi> ﻿I need to install Diablo 2 LOD.  I have instaled the first Diablo 2 and now I need to instal LOD exp, but when I pop the cd in.  Ubuntu doesn't see anything on the cd.  I tried coping the whole cd to a folder within Windows (I'm at a lan party right now :p) and that doesn't work because it has copy right protection and says I need to input the cd.  What should I do?
[15:56] <letalis> itll show everything on the pci bus, but usually itll say something about it being an audio controller or sound something blah blah blah :)
[15:56] <ChickenGirl> letalis it has listings for RAM, ISA, SMBus, and RAM again
[15:57] <harlemdavvey> pleeeeeeasee.. i'm unable to click on my desktop.. files are not going to be selected and launched.. it is like if the desktop is "freezed" ... what can i do to solve the problem? is there any way to solve the situation for exemple is it possible to "restart" the desktop functionality?
[15:57] <letalis> is it a laptop or desktop?
[15:57] <ChickenGirl> desktop
[15:57] <ottoshmidt> why wouldn't my network work on ubuntu when it does on windows (dual boot)? can't even reach LAN... :(
[15:58] <letalis> okay. first question is if the machine had windows on it before do you know whether or not it worked in windows?
[15:58] <ChickenGirl> the mic?
[15:58] <SammyF> IntuitiveNipple: sigjuice! http://pastebin.com/m71599b55
[15:58] <SammyF> IntuitiveNipple: that was ip route show
[15:58] <ChickenGirl> I dual-boot and it works fine in Windows
[15:58] <ottoshmidt> letalis, yes it had wind before
[15:58] <letalis> is it an integrated mic? ie. not one you plug into it.
[15:59] <ChickenGirl> it's a headphone/mic combo, plugs into mic and headphone jacks (not usb)
[15:59] <IntuitiveNipple> SammyF: Looks okay so far... now... how is the PC connected physically? a cat-5 cable to a router or switch?
[15:59] <letalis> okay.
[15:59] <harlemdavvey> i'm unable to click on my desktop.. files are not going to be selected and launched.. it is like if the desktop is "freezed" ... what can i do to solve the problem? is there any way to solve the situation for exemple is it possible to "restart" the desktop functionality?
[15:59] <invisibleninja> letalis: now, it's an external mic
[15:59] <letalis> are you using gnome as your primary desktop?
[15:59] <ChickenGirl> I'm using xfce
[16:00] <ottoshmidt> harlemdavvey, yes u need to restart file manager
[16:00] <invisibleninja> duh, ChickenGirl you too having some problem with the mic?
[16:00] <IntuitiveNipple> SammyF: Also, is the router IP address 192.168.1.1 ?
[16:00] <ChickenGirl> invisibleninja yes :p
[16:00] <letalis> if so what you will need to do is right click on the speaker icon on near the tray (assuming your desktop is still a default layout)
[16:00] <harlemdavvey> ottoshmidt: how can i do?
[16:00] <invisibleninja> we seem to have the same problem
[16:00] <letalis> then click oen volume control
[16:00] <SammyF> IntuitiveNipple: the router's address is 192.168.1.1, and the cable goes to a switch first
[16:00] <letalis> open rather
[16:01] <Seronis> how do i totally dismantal mousekeys?  it keeps turning on randomly and i loathe having to waste my time to turn it off manually when it shouldnt ever activate in the first place (and NO, im NOT using the key combo, it does this usually when i've used vnc recently)
[16:01] <ChickenGirl> I have the xfce volume applet thing and I've tried playing around with the settings but it's not working
[16:01] <freegoo> hello all
[16:01] <letalis> by default, alsa mutes almost everything but the essentials
[16:01] <ottoshmidt> harlemdavvey, compiz --replace
[16:01] <ChickenGirl> or rather the mic IS working, the system can record from it, but I can't figure out what I need to adjust to get it to a sensible/normal/non weird sounding volume level
[16:01] <letalis> yep
[16:01] <harlemdavvey> o m g
[16:01] <letalis> need to unmute the recording channels
[16:02] <sammy> if I have the keyring for a repository installed, why does apt-get tell me a package can't be authenticated?
[16:02] <letalis> :)
[16:02] <harlemdavvey> where the hell did my files go??????
[16:02] <invisibleninja> ChickenGirl: some people are suggesting the culprit is PulseAudio. http://www.econowics.com/news-from-the-net/170/skype-problem-with-audio-playback-ubuntu-810-intrepid-ibex/
[16:02] <letalis> which is what i was getting to
[16:02] <letalis> :)
[16:02] <Imaginativeone> is there commercial software for making networks?
[16:02] <invisibleninja> I thought I'd ask some people's opinion before replacing PulseAudio
[16:02] <IntuitiveNipple> SammyF: Humour me... try swapping cables with one know to work, and also, try a different port on the switch
[16:02] <Imaginativeone> this free paradigm is for the birds
[16:03] <sugi> how do i mount a ISO file?
[16:03] <IntuitiveNipple> Imaginativeone: You can pay me to create you a network if you insist :D
[16:03] <Imaginativeone> name your price
[16:03] <moneybags1234> hey i did a lot of about:config tweaks in firefox 3 in ubuntu on one of my hdd's i was wondering if there was a way that I could migrate those tweaks to another build of firefox on my other hdd?
[16:03] <SammyF> IntuitiveNipple: already tried it. doesn't change anything sadly. As I said, booting from a USB install has the network running flawlessly :/
[16:03] <letalis> once the mixer is open the lower right hand part of the window has a prefernces button. youll need to go in there, and check each one of the empty check boxes, then after that youll have a recording tab along with the playback one
[16:03] <el_ruso> hi everyone
[16:04] <nivalis> hi
[16:04] <letalis> click the recording tab and unmute the mic.
[16:04] <el_ruso> how do i know my ip?
[16:04] <dayo> !welcome | el_ruso
[16:04] <letalis> it should record after that assuming everything is plugged up correctly.
[16:04] <IntuitiveNipple> SammyF: Then, start digging into the /var/log/kern.log. Start from the end and work backwards. I suspect there'll be some clues as to why the network isn't working... maybe a device issue
[16:04] <martin__> hey how edit /proc/acpi/event
[16:04] <sammy> el_ruso, try System -> Administration -> Network Tools
[16:04] <nivalis> el_ruso, www.whatismyip.com
[16:04] <ChickenGirl> letalis the xfce sound mixer is different from the gnome one, it has volume bars for master, PCM, front, front mic, front mic boost, etc etc mic, mic boost, capture, capture,1, digital
[16:04] <savvas> sugi: https://wiki.ubuntu.com/MountIso
[16:05] <ChickenGirl> I can't make sense of it
[16:05] <el_ruso> excuse guys my ip under router
[16:05] <moneybags1234> nivalis, I did a lot of about:config tweaks in firefox 3 in ubuntu on one of my hdd's i was wondering if there was a way that I could migrate those tweaks to another build of firefox on my other hdd?
[16:05] <letalis> hmm ive never messed with xfce. wonder if anyone else in here might know
[16:06] <Myrtti> ChickenGirl, letalis: #xubuntu
[16:06] <letalis> if you have gnome installed typing gnome-volume-control in a terminal should bring up the mixer panel
[16:06] <sammy> moneybags1234, do you want to copy your entire profile to another instance of firefox?
[16:06] <Frijolie> having a problem with HAL and my mouse cursor--it jumps to random locations on the screen and chooses submenus for me
[16:06] <Myrtti> ChickenGirl: try alsamixer
[16:06] <dayo> el_ruso: use this command: ifconfig -a
[16:06] <th__> hey is there anyway to increase quantum of inodes?
[16:06] <Frijolie> my /etc/X11/xorg.conf doesn't haven anything listed for a mouse
[16:06] <el_ruso> dayo thanks, and thanks to everyone
[16:06] <sammy> ChickenGirl, if you're using pulseaudio there is a mixer program for that in the package pulseaudio-utils
[16:06] <moneybags1234> sammy, sure that would work too but mainly i just want the about:config tweaks
[16:07] <nivalis> moneybags, there ought to be a dotfile for it somewhere
[16:07] <moneybags1234> nivalis, what would it be called?
[16:07] <sammy> moneybags1234, prefs.js holds your about:config tweaks
[16:07] <ChickenGirl> sammy I don't knowwhat pulseaudio is, so I don't know whether I'm using it or if it's the problem :/
[16:07] <moneybags1234> sammy, great thanks!
[16:07] <letalis> !pulseaudio | ChickenGirl
[16:08] <sammy> ChickenGirl, its a good place to start. pulse audio sits on top of alsa, think of it as the 'master' mixer for your  machine, managing at the highest level all the input and output
[16:08] <ChickenGirl> does it have to be deliberately installed or does it come with Itchy Iguana (Ibex, whatever)?
[16:09] <letalis> sammy: not necessarily true, pulseaudio is just a layer running on top of alsa, if she doesnt unmute the mic from within alsa it wont work in anything else.
[16:09] <Myrtti> ChickenGirl: xubuntu doesn't come with pulseaudio by default
[16:10] <ChickenGirl> the mic doesn't seem to be muted, I've been trying to use ventrilo, when I talk people hear "feedback"-like noises
[16:10] <th__> i have been doing that
[16:10] <Ejlan> Any one more then me that have the "Assertion failed" error in firefox?
[16:10] <sammy> ChickenGirl, that sounds like alsa is not only recording from your microphone, but also recording a 'monitor' input
[16:11] <letalis> yeah that happens when the 'wires' get crossed as it were.
[16:11]  * letalis does a lot of work in ardour
[16:11] <letalis> :)
[16:12] <sammy> ChickenGirl, you need to learn a bit more about what all of the different channels in your mixer do. try finding an audio recording program and slowly test what happens when you record from each channel. you'll find out where the audio is coming from and going to. there's really no easy way to walk someone through it, though maybe someone else has a better idea
[16:12] <ChickenGirl> alsamixer has the exact same volume bar setup as the xfce mixer
[16:12] <ChickenGirl> sammy can you recommend one? "Sound Recorder" isn't cutting it :p
[16:12] <Frijolie> anyone, anyone, Bueler...Bueler
[16:13] <letalis> ChickenGirl: what are you attempting to accomplish? just getting vent to work?
[16:13] <Myrtti> ChickenGirl: have you checked already that your capture input sources are the right way around?
[16:13] <ChickenGirl> letalis, trying to talk in vent
[16:13] <sammy> in xfce? I've never used it before. what I would do is look into the recording tab of your mixer program. mute *all* the channels and slowly unmute each one by themselves
[16:14] <Swammy> I have dual booted Ubuntu with MacOX86 and am not prompted with the boot menu allowing me to choose which OS to run
[16:14] <ChickenGirl> myrtti, how do I do that?
[16:15] <Seronis> how do i totally dismantal mousekeys?  it keeps turning on randomly and i loathe having to waste my time to turn it off manually when it shouldnt ever activate in the first place (and NO, im NOT using the key combo, it does this usually when i've used vnc recently)
[16:15] <Myrtti> ChickenGirl: launch a terminal, type in alsamixer, hit tab, move with arrow keys to right, until your on Input Sources. Change the values with arrows up and down. Exit with esc.
[16:15] <Drummies> join #ubuntu-nl-meeting
[16:16] <nivalis> also, store it with alsactl store as root
[16:16] <circusbred> bah no imagerotate()
[16:16] <Myrtti> ChickenGirl: also, my ~/.asoundrc is http://pastebin.com/f6c4a94a
[16:16] <bartmon> Hello! Compiz users, how can I enable window snapping to panel borders? In metacity snaping works much better because of this.
[16:16] <sammy> Seronis, System -> Preferences -> Assistive Technologies
[16:16] <Seronis> sammy:  that doesnt make it go away forever
[16:17] <letalis> ChickenGirl: yeah a misconfigured .asoundrc can do some nasty stuff
[16:17] <Seronis> that is what i have to do to turn it off when it turns itself on.  i want it  -gone-  so that it cant turn itself on anymore
[16:17] <letalis> let me look
[16:17] <azath> So I upgraded to jaunty, rebooted, sound was working - but the 2.6.28-7 kernel was mapping my drives differently, had to uninstall, reinstall, change some menu.lst parameters before it would boot. But NOW I don't have sound, and I expect it has to do with the kernel.
[16:17] <sammy> Seronis, in keyboard preferences, under the accessibility tab, I see 'accessibility features can be triggered with keyboard shortcuts'
[16:17] <Myrtti> !jaunty | azath
[16:17] <Seronis> that is deselected
[16:17] <sammy> that is deseected yet mouse keys still activates when you press something on the keyboard?
[16:18] <bubba> hi, I just tried to install "exiftool" but it seems like its not i the repositories? Does anyone know why?
[16:18] <Seronis> sammy:  it activates randomly.  generally near times i've used vnc to access my machine
[16:18] <Myrtti> !info exiftool
[16:18] <whooperdoo> ddsdf
[16:18] <bubba> what the f...
[16:18] <Myrtti> !info libimage-exiftool-perl
[16:18] <Seronis> sammy:  'enable assistive technologies'  is deselected
[16:19] <Myrtti> bubba: ^
[16:19] <n8tuser> Seronis-> see if it has an entry in your /etc/X11/xorg.conf
[16:19] <george> d/l'd gooogle earth into unbuntu desktop. It is .bin file. how do I install??
[16:19] <bubba> ok, thanks anyway
[16:19] <Myrtti> george: you can install it enabling medibuntu repository and installing ti from there
[16:19] <Seronis> n8tuser:  is that a large file or something specific to look for ?   (opening now)
[16:19] <IntuitiveNipple> george: Google Earth 5 ?
[16:19] <Myrtti> george: much safer to do it like that
[16:20] <SammyF> IntuitiveNipple: I give up. no errors in dmesg, and it ~used~ to work before installing the updates ... I'll try to rebuild the USB install and then reinstall the AA1
[16:20] <sammy> george, https://help.ubuntu.com/community/GoogleEarth
[16:20] <bartmon> george: in a terminal type  "sh <path to downloaded file>"
[16:21] <george> it is google earth linux (3)
[16:21] <IntuitiveNipple> SammyF: OK ... have you tried using tcpdump to monitor eth0 to see if it can received any ethernet broadcast packets
[16:21] <IntuitiveNipple> SammyF: That might help determine if it's a hardware/driver issue, or higher up
[16:21] <sammy> Myrtti, interesting, the fact that google earth is in the medibuntu repository should be added to the community doc page.
[16:22] <IntuitiveNipple> george: Google Earth v4.x are in the medibuntu repository
[16:22] <SammyF> IntuitiveNipple: looks like eth0 doesn't receive or send anything.
[16:22] <IntuitiveNipple> george: Usually it's a case of doing "sudo bash <filename>" to install it
[16:22] <SammyF> IntuitiveNipple: hmm ... might be a powersaving thing
[16:23] <Seronis> n8tuser: nothing mentioning  mousekeys or accessibility options in xorg.conf
[16:23] <savvas> sammy: I trust that you will do it :)
[16:23] <IntuitiveNipple> SammyF: Check the arp cache see if it has ever seen anything
[16:23] <keystr0k> xvidcap keeps crashing on me... about 2 seconds after I click the record button... any ideas?  I've tried with/without compiz...
[16:23] <sammy> savvas, I'm just logging in with my launchpad openID to do just that :)
[16:23] <letalis> ChickenGirl: I looked at your pastebin, that doesnt look awfully different from a default one. but i doubt having it is necessary.
[16:23] <savvas> sammy: thanks! :)
[16:23] <bubba> Myrtti, I didnt realize that only the package name changed.  thanks for the help.
[16:23] <n8tuser> Seronis -> okay, i dont know where the settings is for that then
[16:24] <letalis> you need to get a mixer control that ives you full access to all of the options in alsa and basically just unmute the recording portion of the mice
[16:24] <letalis> mic rather
[16:24] <savvas> sammy: actually, the list of packages is here: http://packages.medibuntu.org/
[16:24] <george> how to get to medibuntu reps...??
[16:24] <sammy> savvas, whats something else people commonly install from medibuntu repositories so i can copy the instructions from an already tried and true help doc
[16:24] <SammyF> IntuitiveNipple: sigjuice: wtf!!! "arp who-has 192.168.1.1 tell Looney-Tunes.local" ... does that mean that it thinks 192.168.1.1 is itself?
[16:24] <th__> hey is there anyway to increase quantum of inodes?
[16:24] <ikonia> th__: quantum of inodes ?
[16:25] <Seronis> n8tuser:  im not worried about a setting.   i just want the feature sabatoged / dismantled / gone.   Any way to intentionally handicap it beyond  unselecting   "enable assistive technologies"  and  "features can be toggled with keyboard shortcuts"
[16:25] <sammy> also, does anyone have any idea why apt-get complains about a package not being authenticated, when the keyring for its repository is already loaded, and apt-key reports its there?
[16:25] <sammy> ikonia, I think they mean number of inodes
[16:25] <Seronis> n8tuser:  cause i've had those two DE selected for months and it still turns itself back on randomly after vnc use
[16:25] <sammy> th__, in what filesystem?
[16:25] <SammyF> IntuitiveNipple: sigjuice: that's while pinging 192.168.1.1 and running tcpdump btw
[16:25] <th__> ikonia, i ran out of them. ext3
[16:25] <IntuitiveNipple> SammyF: no, that means it is asking for the MAC address of the network interface that hosts 192.168.1.1
[16:25] <th__> sammy, ext3
[16:25] <Maggie> how can I update BIOS of my motherboard if I am using Ubuntu 8.04?
[16:26] <SammyF> IntuitiveNipple: sigh ...
[16:26] <ikonia> th__: you can increase the number of inodes with tune2fs
[16:26] <th__> yes number
[16:26] <n8tuser> Seronis -> I have not come across that issue before, therefore i dont know what to tell you, other than looking for some hints in I thought where it should have been configured
[16:26] <SammyF> IntuitiveNipple: and here I was starting to be happy ...
[16:26] <Jack_Sparrow> Maggie use a dos boot disk as most are designed to be flashed under dos
[16:26] <IntuitiveNipple> SammyF: :)
[16:26] <SammyF> IntuitiveNipple: I just hope the USB Install option will w... okay .. it didn't work
[16:26] <Seronis> n8tuser:  https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/192508
[16:26] <th__> ikonia, it just works like that?
[16:26] <Seronis> no one has an answer for it though.  figure id check here
[16:27] <ikonia> th__: tune2fs is a command, you'll need to set the options specific to your file system
[16:27] <Maggie> Jack_Sparrow how do i do that
[16:27] <th__> ikonia, nice, thx
[16:30] <Barnz> how can i use nmap can any one help?
[16:30] <ikonia> Barnz: use it for what ?
[16:30] <erUSUL> Barnz: install and use the gui ( zenmap )
[16:30] <ikonia> Barnz: if you type "nmap" all the option come up
[16:30] <bartmon> Barnz: Well man nmap is pretty good
[16:31] <Maggie> How can I make my thumb drive bootable?
[16:31] <Barnz> heard it can be use to scan port how do i do that?
[16:31] <ikonia> Barnz: type nmap - see the options
[16:31] <Barnz> any zenmap for ubuntu.
[16:32] <nivalis> Barnz, why do you want to scan ports?
[16:32] <ikonia> Barnz: look in the software repos
[16:32] <jpds> !info zenmap | Barnz
[16:33] <Seronis> sammyf, n8tuser: thanks for help at looking for options, but can either of you just tell me how to -remove- the feature completely that way i dont have to worry about a bug turning it back on?   even  WinXP lets you uninstall hidden features if you know what  inf file to hack to make them show up in add/remove programs
[16:33] <toman_> hello, I was wondering if someone can help me. I connect to the internet threw wired connections at different Internet cafes, until yesterday everything worked fine, today I cant seem to get online at all. Can someone please help me.
[16:33] <Maggie> How can I make my thumb drive bootable? plz help
[16:33] <Barnz> i got this server i keep in my office. want to c how vulnerable it is
[16:33] <Elive_user77_en> IntuitiveNipple,  lol there lost too
[16:33] <quatar-it> hi all. How to contact an user logged on my same computer (me by ssh using terminal, he sitted there, using gnome), in a way more invasive than ytalk (that he see only if looking at the console)?
[16:33] <ikonia> Barnz: nmap won't tell you how vunerable it is
[16:34] <gb__> hey guys got a question
[16:34] <Barnz> what will it do then?
[16:34] <Dr_willis> Maggie,  install syslinux and use syslinux to make it bootable if its a vfat filesystem.
[16:34] <whileimhere> Hi. I was wondering is there a program to allow me ot buy mp3s from itunes for linux?
[16:34] <gb__> has ubuntu stopped support for 6.10?
[16:34] <ikonia> Barnz: and with respect if you can't figure out how to use the tool, you'll have no chance of being able to fix any vunerabilities you think you've found
[16:34] <ikonia> gb__: yes
[16:34] <gb__> aaw :(
[16:34] <nivalis> Barnz, try this https://www.grc.com/x/ne.dll?bh0bkyd2
[16:34] <quizme> how do you install a *.deb file ?
[16:34] <ikonia> gb__: 7.10 is the earliest release still in active support
[16:34] <ikonia> quizme: dpkg -i $deb
[16:34] <jrib> gb__: just upgrade to a supported version like 8.04 or 8.10
[16:34] <quizme> apt-get install *.deb ?
[16:35] <Elive_user77_en> how do i make 6.10  turn in to ce?
[16:35] <gb__> quizme,  mostly if u click it it will give u option to install it too
[16:35] <jrib> Elive_user77_en: ce?
[16:35] <Maggie> Dr_willis will my computer recognize vfat file system
[16:35] <Prabz> Hi, Ever since I upgraded to Intrepid Ibex, my swap drive isn't working.. can anybody give me any pointers as to how to set it up manually?
[16:35] <toman_> Maggie, yes.
[16:35] <gb__> maggie yes vfat is fat32
[16:35] <Dr_willis> Maggie,  linux and windows both can. thats what windows uses. (or can use)
[16:35] <Elive_user77_en> sorry 8.10
[16:35] <jrib> !swap | Prabz
[16:36] <marcos_> Hello, I have one Gigabyte board with Via C3 800 Mhz processor 512 MB Ram, I want to install Ubuntu 9.04 on a USB key 4 GB, how to do it and can it work or you suggest a different distribution
[16:36] <jrib> Elive_user77_en: ok, but still: what do you mean by "ce"?
[16:36] <whileimhere> !itunes
[16:36] <Elive_user77_en> along time back there was a ubuntu ce
[16:36] <Elive_user77_en> christian edition
[16:36] <Elive_user77_en> i want 8.10 ce
[16:36] <n8tuser> Seronis -> i really dont know, the link you provided seems to narrow it down, but i havenot come across the issues, so its hard for me to give you solid advise of what to turn off, you have to do trial and error
[16:36] <whileimhere> So I am a bit confused. How can I buy songs on itunes without the itunes program or is everyone on linux locked out?
[16:36] <Elive_user77_en> how do i do it
[16:36] <tangentcollision> christian edition?
[16:36] <Elive_user77_en> yes
[16:36] <toman_> My ubuntu Laptop wont connect online. It worked fine until yesterday. Any ideas??
[16:37] <Seronis> n8tuser: ty =)
[16:37] <tangentcollision> what made it different, Elive_user77_en
[16:37] <Elive_user77_en> firefox was way different
[16:37] <Prabz> jrib, Thanks for that info, I'm not that much of a Noob. actually I mean it isn't getting activated automatically. How to activate it manually.. I know it involves something with /etc/fstab. but don't know how to edit it.. Can you help?
[16:37] <Elive_user77_en> how it acted was way nicer
[16:37] <toman_> please help im stuck at an internet cafe on a bad pireted version of XP!
[16:37] <tangentcollision> that doesn't help much
[16:37] <jrib> Prabz: that's in the link ubottu gave you
[16:37] <toman_> lol @ Spiderman XP SP5!
[16:37] <Elive_user77_en> programs in it were different
[16:38] <Elive_user77_en> the firefox look was better
[16:38] <tangentcollision> Elive_user77_en: that's so vague it hurts
[16:38] <ikonia> Elive_user77_en: that is not supported here
[16:38] <satrix> hi to all
[16:38] <toman_> hi satrix
[16:38] <satrix> guys
[16:38] <ikonia> Elive_user77_en: Ubuntu CE is not supported here as it's not an official ubuntu release.
[16:38] <gb__> thank you :)
[16:38] <Elive_user77_en> i guessed it wasnt  lol
[16:38] <gb__> happy valentines day all :)
[16:38] <Elive_user77_en> pitty it should be
[16:38] <satrix> anybody now how add scaling for amd proc on panel
[16:39] <ikonia> Elive_user77_en: you should use supported versions
[16:39] <tangentcollision> no it shouldn't, unless islam edition and judiasm edition release too
[16:39] <Elive_user77_en> i got 8.10 an it aint helpin me rite now
[16:39] <tangentcollision> as well as hindubuntu
[16:39] <jrib> Elive_user77_en: from what I recall reading, ce just has certain packages installed by default.  You should be able to just install those packages on your install
[16:39] <Elive_user77_en> brb
[16:39] <cyzie> how do i reinstall a package that has been install ?
[16:39] <quatar-it> Another question, you all: how do i make an alert box come out in gnome, with a custommssage inside, by command line?
[16:39] <toman_> help, please, sos no internet on ubuntu laptop! worked fine until yesterday, just plugged in and everything worked.
[16:40] <Dr_willis> quatar-it,  the 'zenity' program can do that.. and i think thes some other alternatives also.
[16:40] <Dr_willis> !info zenity
[16:40] <wiehan> hey can someone please help me, I'm using banshee (rhythmbox or any other would suffice). I have created a very nice playlist, now I want to export all those files to a CD (in DATA format - for use in car radio which can play mp3 etc) - how can I do this? Most plugins/options allows for to create a audio CD with the files contained in that playlist, is there a good way to achieve this?
[16:40] <Maggie> Dr_willis I installed syslinux on my system but I dont know how to use it
[16:40] <quatar-it> Dr_willis: i'll try it, thanks
[16:41] <Elive_user77_en> yummy coffee
[16:41] <Dr_willis> Maggie,  it has documetation and a web site..  its used to make thumb drives 'bootable' by copyion gover the proper files.. and setting some flags i think.
[16:41] <tangentcollision> Elive_user77_en: http://ubuntuce.com/
[16:41] <faz> hi everybody
[16:41] <ionnoi> hi all
[16:41] <nivalis> hi
[16:41] <designPhlaw> so many people
[16:41] <faz> how can I upgrade my openssl to the neweest version
[16:42] <ikonia> faz: use the ubuntu packaged versions
[16:42] <Elive_user77_en> ty tangentcollision
[16:42] <ikonia> faz: it provides backports and updates - trut the packagers
[16:42] <ikonia> trust
[16:42] <tangentcollision> Elive_user77_en: google, please use the google, it's more holy than any bible we know
[16:42] <designPhlaw> faz: there should be an upgrade button in your settings menu
[16:42] <Elive_user77_en> tangentcollision,  i do googles my friend most times lol
[16:43] <toman_> My ubuntu Laptop wont connect online. It worked fine until yesterday. please help if you can.
[16:43] <Elive_user77_en> problem is i cant ever find firefox from ce for this 1
[16:43] <SammyF> toman_: uh uh
[16:43] <SammyF> toman_: onboard ethernet, intel based?
[16:44] <Nasra> I have a question guys....why when I go : start: run: cmd: ipconfig: my ip address is different from when I do whatismyip.com ....can you answer my question...I am little naive when it comes to computers.....thanks alot
[16:44] <wiehan> does anyone know a good way to create a data cd from a audio playlist in ubuntu...
[16:44] <toman_> sammyf yes, im on an eee pc 1000H
[16:44] <ikonia> Nasra: your not using ubuntu
[16:44] <ikonia> Nasra: your using windows, ask in ##windows
[16:44] <faz> ikonia: how to >
[16:44] <SammyF> toman_: Acer Aspire One here, same problem
[16:44] <toman_> everything worked fine until yesterday just pluged it in and it worked now it wont connect im not even getting lights
[16:44] <ikonia> faz: how to what ?
[16:44] <toman_> SammyF really?
[16:44] <faz> designPhlaw: where ?
[16:44] <toman_> sammyf do you know how to fix it?
[16:44] <Nasra> Ikonia ...how do I do this in ubuntu then?
[16:45] <ikonia> Nasra: ifconfig
[16:45] <Nasra> findout my ip address?
[16:45] <quizme> does anybody have a script that slices up a big file into pieces and downloads each piece, checking the MD5 after it downloads and then reinitiating the downlod in case the MD5 hash doesn't match?
[16:45] <ikonia> faz: trust the ubuntu packages, they offer the most compatible packages they can for the operating system
[16:45] <ikonia> quizme: shouldn't be too hard to write
[16:45] <SammyF> toman_: yep. reinstalled xubuntu yesterday on it, worked fine. Installed the updates, and then no wired connection anymore. and sorry, no. I don't have any solution. People here have been trying to help me for over an hour now, no chance :/
[16:46] <ikonia> quizme: look at split
[16:46] <SammyF> brb ... rebooting
[16:46] <faz> ikonia: what should i do right now ?
[16:46] <IntuitiveNipple> Nasra: Because the PC's local IP address is often for the local area network only, and the Internet router has a separate public IP address which is what whatsmyip.com will see
[16:46] <toman_> i cant re-install ubuntu!
[16:46] <ikonia> faz: nothing - trust the ubuntu developers
[16:46] <jrib> quizme: how would it know the md5?
[16:46] <Cube3D> XD
[16:46] <Cube3D> lol
[16:46] <faz> ikonia: ubuntu says my system is up to date
[16:46] <lol> IDIOTS!!!
[16:46] <ikonia> faz: then thats great
[16:46] <ikonia> lol: what
[16:46] <faz> but I ahve a problem with googleearth
[16:46] <jrib> lol: please stay on-topic
[16:47] <ikonia> faz: you're fine then
[16:47] <Cube3D> nick lol
[16:47] <quizme> jrib, there would have to be some communication between the remote server and local server
[16:47] <Nasra> IntuitiveNipple: how do I find out my ip in using Ubuntu...what is the procedure ...I am new in ubuntu?
[16:47] <ikonia> Nasra: ifconfig
[16:47] <jrib> quizme: so you have access to both the server and client then?
[16:47] <brunner> once libapache2-mod-php5 is installed, what additional steps do I have to take to get apache to execute php files with php?
[16:47] <faz> ikonia: I've googled and find that i should upgrade my openssl
[16:47] <Nasra> ikonia: when do I go in the terminal?
[16:47] <ikonia> brunner: restart apache now - that sould be it
[16:47] <vanrain> how I can make computer shutdown by itself when a system task end, such as, I want system turn off when system upgrade was finished
[16:47] <toman_> sammyf https://answers.launchpad.net/ubuntu/+question/60165
[16:48] <quizme> jrib: yeah i would assume so
[16:48] <ikonia> faz: what version of ubuntu are you on
[16:48] <ikonia> Nasra: now
[16:48] <IntuitiveNipple> Nasra: From a terminal (Applications > Accessories > Terminal) run the command "ifconfig" and it will show you all the settings for the network interfaces, including any assigned IP addresses
[16:48] <Nasra> ubuntu 804 LTS
[16:48] <brunner> ikonia: oh, you're right.  It looked like it restarted apache when I installed that package, but I guess it hadn't.  thanks.
[16:48] <faz> ikonia: 8.1
[16:48] <marcos_> hi renew my qestion: how to install ubuntu 9.04 on a usb 4 GB for a mini-itx via c3
[16:48] <Nasra> okay thanksalot
[16:48] <ikonia> faz: then you are fine - you don't need to upgrade
[16:48] <ikonia> brunner: cool
[16:48] <jrib> !jaunty | marcos_
[16:48] <btQuark> http://brainstorm.ubuntu.com/idea/16430/
[16:49] <Ryzzan> what's the best way to "uninstall" my unbuntu? any tip?
[16:49] <jrib> quizme: I don't really understand the purpose
[16:49] <Dr_willis> Ryzzan,  depends on what you want to do afterwards.. and how you installed it.
[16:49] <brunner> Ryzzan: reformatting works pretty well
[16:49] <brunner> in my experience.
[16:49] <faz> googleearth is closing when I run it!! it just starts and ikonia: close
[16:49] <quizme> jrib: i have a  faulty internet connection and i'm trying to download the Flex 4 sdk, 103 MB
[16:49] <vanrain> repeat:  how I can make computer shutdown by itself when a system task end, such as, I want system turn off when system upgrade was finished
[16:50] <Dr_willis> Ryzzan,  use a parittioniong tool.. delete parittions,  use windows rescue/system to restiore boot loader.
[16:50] <brunner> Ryzzan: you could always use a large electromagnet, though
[16:50] <ikonia> quizme: your md5's for partial files will not be useable for split files
[16:50] <brunner> Ryzzan: if it's powerful enough
[16:50] <toman_> someone please help i cant seem to get online with my ubuntu machine. everything worked until yesterday now nothing works.
[16:50] <jrib> quizme: have you tried using rsync?
[16:50] <brunner> toman_: ask a specific question
[16:50] <laces12> hi
[16:50] <tangentcollision> http://christianubuntu.blogspot.com/
[16:50] <faz> ikonia: any idea?
[16:51] <toman_> Brunner, until yesterday my internet worked. Now it dosent. No idea what the problem is.
[16:51] <FlareFlare> !spam | tangentcollision
[16:51] <vanrain> repeat:  how I can make computer shutdown by itself when a system task end, such as, I want system turn off when system upgrade was finished, shell script can do it? how?
[16:51] <Nasra> ikonia: IntuitiveNipple: ...I got it....thanksalot......
[16:51] <ikonia> faz: faz install the package googleearth-package
[16:51] <brunner> toman_: have you checked to see if your network interface is connected to your LAN?
[16:51] <tangentcollision> FlareFlare: in no way is that spam, I'm giving useful input in UCE that Elive requested
[16:51] <brunner> toman_: that's where I'd start
[16:51] <Nasra> I have another question:
[16:51] <faz> ikonia: i installed the bin and run it
[16:52] <brunner> toman_: you can do that using the ifconfig command
[16:52] <vanrain> ok  nobody answer me  running
[16:52] <Nasra> how do I forward a port # into my ubuntu ip?
[16:52] <laces12> how do i change my nick?
[16:52] <Dr_willis> vanrain,  write a little script that does the 2 commands..    one to upgrade then   the 'shutdown' or 'halt' command
[16:52] <ikonia> faz: faz install the package googleearth-package
[16:52] <FlareFlare> tangentcollision: Please Read the rules
[16:52] <brunner> laces12: /nick newnick
[16:52] <quizme> jrib: does that make sure files are the same?
[16:52] <FlareFlare> laces12: #Freenode
[16:52] <jrib> quizme: it does some sort of checksums, yes
[16:53] <quizme> jrib: hmm that sounds like what i want
[16:53] <SmileDay> What's package name for sound? I will "dpkg-reconfigure".
[16:53] <vanrain> thx Dr_willis
[16:53] <toman_> brunner, and after i run ifconfig then?
[16:53] <SmileDay> Help me
[16:53] <brunner> toman_: you'll want to decide what to do based on the output of ifconfig
[16:53] <FlareFlare> !ask | SmileDay
[16:53] <toman_> i get alot of infomation
[16:54] <SmileDay> What's package name for sound? I will "dpkg-reconfigure".
[16:54] <nivalis> Ryzzan, yes "ubuntu4ever" | dd of=/dev/sdX might be a fun way of uninstalling ubuntu?
[16:54] <vanrain> but I need more details, how to write the script
[16:54] <Elive_user77_en> Flareflame haveing fun yet?lol
[16:54] <brunner> toman_: if you need help, paste the output into pastebin and paste the URL into this channel.  I will take a look for you.
[16:54] <IntuitiveNipple> quizme: How about a download manager like http://projects.gnome.org/gwget/
[16:54] <brunner> !pastebin
[16:54] <Dr_willis> vande,  a 2 line script.. one line does the upgrade command.. other does the halt command
[16:54] <Nasra> intuitiveNipple | Ikonia: how do I forward a port # into my Ubuntu ip?
[16:55] <bn43> hi is there a way to disble decryption of home directory?  I just want to see if this affects performance
[16:55] <fearful> SmileDay: I don't understand, thats the command to reconfigure the dpkg, not sound.
[16:55] <Dr_willis> vande,  if you want to get fancy put a #!/bin/bash at the start and make it executable
[16:55] <ikonia> Nasra: you need to read your router documentation
[16:55] <Flare183> Elive_user77_en: Sorry. I just got back, I was playing Metroid Prime Hunters
[16:55] <toman_> brunner, i haven't changed anything on my machine, like I said everything worked well and it just stopped working. Ok I will have to transfer it to this machine via usb drive. Will you be here for a little while?
[16:55] <Elive_user77_en> so you were having fun lol
[16:55] <Flare183> Elive_user77_en: Yeap :)
[16:56] <Nasra> ikonia: lost all documentation.....but is WRT54GP2 Router wireless g
[16:56] <vanrain> maybe I must take spare time to learn shell
[16:56] <brunner> toman_: I'm not sure how long I'll be here.  You're welcome to contact me at any of the IM services listed at chrisbrunner.com/contact if I'm no longer around.
[16:56] <ikonia> Nasra: search the web for the manual then, #ubuntu doesn't provider router support
[16:56] <vanrain> thx Dr_wills
[16:56] <brunner> toman_: regardless, this is the only way I know of to troubleshoot your issue, so someone else would likely ask you to do the same thing
[16:57] <toman_> brunner, fantastic thank you  it will only take a second, i just have to save it to usb then transfer here.
[16:57] <Elive_user77_en> i see theres new ce sweet i had old 1 im tryn to get newer 1 woohoo
[16:57] <brunner> toman_: okay
[16:57] <SmileDay> Voice of part of sound.... After All setting value 0...
[16:57] <ikonia> Elive_user77_en: can you please stop dicussing CE please
[16:57] <Nasra> ikonia: last question ...the ip that I got throught ifconfig is that the one I use for forwarding?
[16:57] <ikonia> Nasra: that's the one you forward to
[16:57] <Elive_user77_en> yes master i thought ubuntu worked with all ubuntu soory i was mistaken
[16:57] <Nasra> ok
[16:58] <brunner> toman_: I take smoke breaks often, so that's probably what I'm up to if I don't respond right away... I'm about to take one now, btw
[16:58] <Nasra> thanks alot ikonia
[16:58] <fearful> I got a bad head ache :\
[16:58] <SmileDay> lost the voice of sound. After all set-value 0...
[16:58] <blackjak> is there anyone who is willing to help me setting my raling chipset wifi card to work?
[16:59] <fearful> SmileDay, open the volume master double click the volume icon on the panel
[16:59] <toman_> seems like I fixed it :D
[16:59] <Nasra> you guys are great in assisting ppls here.....
[16:59] <toman_> Brunner, seems like the problem is fixed.
[16:59] <Flare183> Nasra: We try
[17:00] <toman_> :) Thanks alot tho, I ran the command sudo mv /etc/network/interfaces /etc/network/interfaces_old and rebooted now everyting works.
[17:00] <toman_> :)
[17:00] <anika> hallo?
[17:00] <Nasra> Flare183: I am new in Ubuntu 804LTS I like alot....and I am ready to say goodby to Windass
[17:00] <mosimo> how can i cange the screen res for a user using ssh?
[17:00] <anika> icq????????????????
[17:00] <ikonia> mosimo: that's down to the terminal/ssh client
[17:01] <ikonia> anika: what ?
[17:01] <mosimo> kinda set it to an unsupported one and can now only ssh into the box
[17:01] <Dr_willis> anika,  this is IRC - not icq.
[17:01] <mosimo> using putty
[17:01] <SmileDay> Sound is very good outputting to speaker. But... can not voice of sound.... after all set-value "Sound noting"
[17:01] <fearful> Nasra nice decision:p we can help you all the way
[17:01] <mosimo> just wonderng where the config file is that stores the current screen res, xorg + gnome
[17:01] <Flare183> Nasra: hehe I know what you mean. (Note Please don't curse. :) Instead, call Windows, Winblows)
[17:01] <ikonia> mosimo: /etc/X11/xorg.conf
[17:02] <fearful> SmileDay: I don't understand the voice of sound? Like a microphone
[17:02] <Flare183> mosimo: /etc/X11/xorg.conf
[17:02] <fearful> lol
[17:02] <Flare183> !lol | fearful
[17:02] <fearful> Windblows
[17:02] <Dr_willis> mosimo,  under gnome a user can have their own 'custom res' setting..  but i dont know where its kept
[17:02] <mosimo> that doesnt actually store the current set screen res though for each user does it?
[17:02] <CRASH69> any easy way to install mumble 1.1.7 on 8.04 ?
[17:02] <Flare183> fearful: I made it up; Windows = Winblows
[17:02] <Dr_willis> mosimo,  no - xorg.conf does not.
[17:02] <ikonia> mosimo: it's not per user
[17:02] <SmileDay> fearful, voice in sound.
[17:02] <ikonia> mosimo: it's a global setting
[17:02] <fearful> Flare183, I know I found it funny :p
[17:02] <fiftyone> brunner. ha im on my laptop again thank everyone who helped me
[17:03] <Nasra> Flare183: Oops wrong key then....can you give me a site or book when I learn about commands and how to go about in Ubuntu?
[17:03] <Nasra> thanks
[17:03] <Flare183> Nasra: Sure Hold on
[17:03] <Flare183> !bash | Nasra
[17:03] <ikonia> Nasra: http://www.tldp.org
[17:03] <Nasra> graet !!! Wepa !
[17:03] <fearful> SmileDay: I'm sorry I really do not understand your intentions
[17:04] <fearful> SmileDay A microphone?
[17:04] <brunner> fiftyone: excellent =]
[17:05] <brunner> fiftyone: I know it can be difficult getting starting with linux
[17:06] <SmileDay> fearful, no.... Voice of part of sound. sound(sound: SoundFiles, others)
[17:06] <henaaque> hello
[17:06] <naxa> hi! I've just updated to 8.10. how can i enable the logout replacement on panel? after installation a bulb came up and told me i can enable it, but i had logoff button turned off (wasn't on the panel) so it said to do it manually. i closed the bulb's dialog and after that the bulb disappeared... how can i manually use the logout button replacement?
[17:06] <henaaque> i wanna know if i can do something similar to eyeos using ubuntu
[17:07] <ikonia> eyeos ?
[17:07] <fearful> SmileDay what application, like flash, vlc or what?
[17:07] <quizme> wahts the opppposite of the split command?
[17:07] <henaaque> ikonia, yes, its a distribution that permits you to create a cloud server
[17:08] <jrib> quizme: cat
[17:08] <ikonia> quizme: join ?
[17:08] <henaaque> i wanna know if i can do something similar to eyeos using ubuntu
[17:08] <ikonia> henaaque: what is eyeos ?
[17:08] <mohan43u> Mates, someone please help me to convert this .flv file to avi? http://paste.ubuntu.com/118088/
[17:08] <quizme> split makes files like xaa xab xac etc
[17:09] <henaaque> look at this site: http://www.eyeos.com/
[17:09] <quizme> how do you join them back again if you ahve 10,000 files ?
[17:09] <SmileDay> oh... whiteflag.
[17:09] <Jer-oh-me> Hi, I am having difficulty mounting a removable media player on Hardy, and the support pages didn't seem to help.
[17:09] <jrib> quizme: cat...
[17:09] <ikonia> mohan43u: check the warning "unsupported video codec" - you don't have a way to read it to convert it
[17:09] <tiredbones> I'm trying to backup my home directory, but for some reason I can get around .gvfs. I'm using dar with the option -P to exclude it. dosen't work. any solution?
[17:09] <quizme> jrib i'm gonna have 10,000 arguments to cat though
[17:09] <fearful> henaaque I've never worked on it but I found a tutorial that might be of help
[17:10] <ikonia> henaaque: there are options for web / word wide web client acess in ubuntu but they are not easy to setup in the same way as eyeos
[17:10] <bn43> hi does anyone know how to disable decryption on home drive?
[17:10] <jrib> quizme: do you know how to glob?
[17:10] <wakata> hiĂ
[17:10] <fearful> henaaque: http://www.howtoforge.com/installing_eyeos_debian_etch
[17:10] <quizme> jrib: no :(
[17:10] <henaaque> fearful, thank you
[17:10] <quizme> jrib: cat x* ?
[17:11] <jrib> quizme: you probably want to glob, yeah :)
[17:11] <OrEvA_> how do I run syslinux after installing
[17:11] <fearful> henaaque: No problem, just never used it can't really help much.
[17:11] <quizme> jrib: that will preserve the  correct order?
[17:11] <jrib> quizme: maybe?  check
[17:12] <boaty> I am trying to get my Logitech Quickcam express to work in skype or camorama. I have read the ubuntu webcam page which says it should be automatic. When I do lsusb it recognises it. I also tested it in skype and that freezes the whole computer. I have seen the thread with the LD preload and tried it. Still no luck. Any other suggestions? Thank you
[17:13] <islan_k> hey, I'm having a bit of a complex problem, can't even figure out how to google it
[17:13] <sammyF> boaty: I know it's not much help, but my quckcam express WAS recognized automatically. Checked whether it works in windows?
[17:13] <bn43> hi does anyone know how to disable decryption on home drive?
[17:13] <mohan43u> ikonia: they are asking to compile from svn.. is there any other way?
[17:13] <ikonia> bn43: it's not enabled by default
[17:13] <boaty> It works it windoze.
[17:13] <sammyF> boaty: oh... and I'm assuming you're using either 8.04 or 8.10 here
[17:14] <ikonia> mohan43u: who is "they"
[17:14] <quizme> jrib yah it does ;)
[17:14] <boaty> 8.10
[17:14] <sammyF> boaty: very weird
[17:14] <mohan43u> in mplayer's mailing list..
[17:14] <kreino> help, how to re-enable Recent Documents?
[17:14] <islan_k> my windows comp died, so I was trying to use an Ubuntu Live CD to backup some of the files before a reinstall, but it kept on giving me "logical errors" with no end in sight
[17:14] <islan_k> I feel that if I did an fsck it could fix it, but I can't seem to get to a command prompt
[17:14] <kreino> help, how to re-enable Recent Documents or to enable Trash?
[17:14] <ikonia> mohan43u: if the codec in ubuntu is too early, no
[17:14] <sammyF> boaty: only video input you have? maybe you're using a different device than the quickcam
[17:14] <bn43> ikonia: when I loaded intrepid it asked if I wanted to encrypt home drive and I said yes
[17:14] <jrib> quizme: yea, as long as you don't want to sort numerically it should work (but this is default split behavior)
[17:14] <ikonia> islan_k: sounds like your disk is dead
[17:15] <islan_k> nooooo!
[17:15] <ikonia> islan_k: if windows is dead and ubuntu is moaning - your disk is probably having a problem
[17:15] <mohan43u> ikonia: Check this link, http://lists.mplayerhq.hu/pipermail/mplayer-users/2007-August/068709.html,
[17:15] <boaty> I have the pc setup to my tv using a monitor cable. But that is output not input.
[17:15] <sammyF> boaty: indeed
[17:15] <blah34> !vnc
[17:15] <tiredbones> I tried to remove file .gvfs, but I told that it is busy. What programs use that file?
[17:15] <sammyF> boaty: what did you setup in the multimedia panel for video input?
[17:15] <ikonia> mohan43u: that's a poor response, but the version of mplayer shipped with ubuntu 8.10 is quite old, so he could be right
[17:16] <islan_k> is there any diagnostic program I can run from the cd drive that could tell me for sure?
[17:16] <boaty> only thought is that it is perhaps just too old
[17:16] <ikonia> usser: depends on what the damage is
[17:16] <mohan43u> ikonia: I'm getting this same error in ffmpeg also? is it a libavc problem?
[17:16] <ikonia> usser: smart is always a good check
[17:16] <ikonia> mohan43u: that's the codec - so probably
[17:17] <sammyF> boaty: please write the name of the person you're talking to. it's getting rather messy to answer otherwise ;)
[17:17] <marc> gyges
[17:17] <sammyF> boaty, when you go to system->Preferences->Multimedia System Selector in the second tab, what's in video input?
[17:18] <boaty> samyF. ok thank you for that guidance
[17:18] <OrEvA_> how do I run syslinux after installing
[17:18] <chazco> Can anyone suggest which is likely to have the best results for a live system which has issues with 8.*? Using 7.10 or 9.04?
[17:18] <ikonia> chazco: neither
[17:18] <ikonia> chazco: fix the issue with 8.X
[17:18] <kreino> Your account has expired; please contact your system administrator
[17:18] <kreino> su: Authentication failure
[17:18] <kreino>  <--- how to solve it?
[17:18] <chazco> ikonia - Wifi issues which go way beyond me, so doubtful that i could
[17:19] <ikonia> kreino: contact your system administrator
[17:19] <sammyF> boaty: oh ... And most irc clients have name completion with TAB :)
[17:19] <ikonia> chazco: is this the WPA stuff ?
[17:19] <boaty> sammyF. I have done System>Preferences and do not see mulitmedia selector
[17:19] <chazco> ikonia - Yep, the bug report didnt help. Also having a few other issues with 8.10 too
[17:19] <ubuntistas> iam upgradin to kubuntu 4.2 and the kde windows manger says the the update is not authenticated any clue?
[17:19] <ikonia> chazco: have you updated the bug report - and followed up with the package maintainer
[17:20] <ikonia> chazco: speaking to the guy who is fixing the bug is a great start
[17:20] <sammyF> boaty: "Multimedia System Selector" actually. YOu're using an english version of ubuntu or another language?
[17:20] <islan_k> so ikonia, do you think it is the hard drive?
[17:20] <doubletoker> I need some help, do I want linux-restricted-module installed?
[17:20] <tiredbones> I'm trying to backup my home directory, but for some reason I can get around .gvfs. I'm using dar with the option -P or -X to exclude it. dosen't work. any solution?
[17:20] <marc1453> hello, can someone help a novice with finding Windoze shares and mounting them in Ubuntu?  I want to start using Ubuntu instead of Windows for my system, but all the rest of the computers here run windows and have shared drives I need to access
[17:20] <ikonia> islan_k: I've no idea, I'm not sat at your disk, but if both windows and linux think there is a hard disk problem - it's a common fault
[17:20] <doubletoker> I want stuff like php, mysql and the like, earlier
[17:20] <islan_k> thanks
[17:21] <boaty> SAMMYF: using English version. Nothing that vagues looks like that
[17:21] <ikonia> marc1453: a good start is calling it "windows" not "windoze"
[17:21] <bn43> is there a way for me to remove an ubunt install and start afresh on a dual boot(xp) install
[17:21] <marc1453> it's an os..
[17:21] <ikonia> bn43: re-install over the top
[17:21] <tiredbones> I'm trying to backup my home directory, but for some reason I can get around a permission denied on file .gvfs. I'm using dar with the option -P or -X to exclude it. dosen't work. any solution?
[17:21] <sammyF> boaty: oops ... THAT is weird
[17:21] <ikonia> marc1453: windoze is not an OS, it's called "windows"
[17:21] <mohan43u> ikonia: thanks for the help.. I you can, kindly tell to the mplayer package maintainer to release newer version..
[17:21] <lorenzosu> How to see environment variables in ubuntu?
[17:21] <marc1453> oh, sorry
[17:21] <mohan43u> ikonia: :)
[17:21] <ikonia> mohan43u: pardon, say that again please
[17:21] <ikonia> mohan43u: didn't follow that
[17:21] <mohan43u> ikonia: thanks for the help.. I you can, kindly tell to the mplayer package maintainer to release newer version..
[17:21] <marc1453> I am very frustrated with MS Windows XP at the  moment... nasty virus.  I have had enough
[17:22] <doubletoker> can someone give me the link on ubuntu for lamp
[17:22] <bn43> I want to install lxde - that requires ubuntu-mini, which I have downloaded - what do I have to look out for?
[17:22] <ikonia> mohan43u: I've logged a requet already to have the mplayer version updated in 8.10
[17:22] <chazco> ikonia - Not much I could add to the bug thats not already listed, but will look into it. If not though, 7.10 is still supported i think, so probably better option than 9.04?
[17:22] <marc1453> I am running of the xubuntu live CD at the moment
[17:22] <erUSUL> !lamp | doubletoker
[17:22] <ikonia> chazco: 7.10 is supported yes
[17:22] <marc1453> very nice
[17:22] <mohan43u> ikonia: thanks..
[17:22] <doubletoker> ty
[17:22] <marc1453>  but I need to access the Windows shares on the network
[17:22] <Prabz> doubletoker, http://joeabiraad.com/linuxunix/installing-lamp-on-ubuntu-710-linuxapachemysqlphp/100
[17:22] <ikonia> marc1453: samba will allow that
[17:23] <ikonia> Prabz: is he using ubuntu 7.10 ?
[17:23] <chazco> ikonia - Ok, if it comes to it i'll go with 7.10. Thanks... trying to find out about the wifi power bug and the shutdown bug too
[17:23] <Prabz> ikonia, it works on all 7.10 and later
[17:23] <marc1453> I gathered that, but I am having a hard time figuring out how to 1) find the drives and 2) mount them.  I went through the man pages, but I know very little about configing it
[17:23] <ikonia> doubletoker: you need to install the following packages 1.) apache2 2.) libapache2-mod-php5 3.) mysql-server
[17:24] <marc1453> wondering if someone knows of a tutorial or some suggestions.
[17:24] <spaceBARbarian> how do you install a font in ubuntu /
[17:24] <ikonia> marc1453: system menu - then "connect to" menu
[17:24] <marc1453> ikonia: I gave that a shot
[17:25] <marc1453> ikonia: \\computer\sharename does not appear to work?
[17:25] <marc1453> ikonia: I try again
[17:25] <mushmouse> when i minimize anything it disapears, how do it get it back?
[17:25] <ikonia> marc1453: you don't put in \
[17:25] <ikonia> marc1453: in the Server put in the server name - not \\servername
[17:25] <sammyF> boaty: you probably missed it, but I sent you a private message :)
[17:25] <BNegetive1> Hi all
[17:25] <letalis> spaceBARbarian: fontypython works nice for that
[17:25] <ikonia> marc1453: in the share nam, put in the share name, not \sharename
[17:25] <kreino> ikonia, how to contact administartor?
[17:25] <gick> hi
[17:26] <anom01y> how do I find out why my computer keeps crashing during the night ?
[17:26] <sammyF> boaty: can you pastebin what you have in your system>preferences menu, okease?
[17:26] <BNegetive1> how i can add language to type in?
[17:26] <anom01y> is there a log file or something I can read ?
[17:26] <tiredbones> Dose anyone here use DAR to backup to a CD?
[17:26] <BNegetive1> i Installed Russian Ubuntu but cant type inRussian in it...
[17:26] <erUSUL> anom01y: /var/log/syslog /var/log/messages etc
[17:26] <sammyF> BNegetive1: add the language you need in System->Administration->Language Support
[17:27] <marc1453> ikonia: the machine is 192.168.0.8 (aka zaphod) and the shared folder is music
[17:27] <BNegetive1> i added there all the langueges that i need but i cant type in it how i change the language?
[17:27] <mirak> how to list a modules options ?
[17:27] <ikonia> marc1453: so put the server as 192.168.0.8 and the share as music
[17:28] <erUSUL> marc1453: Places>Network>Windows Network does not show it either ?
[17:28] <mushmouse> i'm a new ubuntu user and i need a little help
[17:28] <marc1453> ikonia: I know I am doing something worng
[17:28] <erUSUL> mirak: modinfo
[17:28] <kejava> mirak: modinfo <module_name>
[17:28] <marc1453> ikonia: 1 sec, I try something
[17:28] <mirak> thanks all
[17:28] <SmileDay> Where is sounds output charge package?
[17:29] <marc1453> ikonia: think I figured it out... there is no network ;-)
[17:29]  * erUSUL o.0
[17:29] <mushmouse> can anyone help?
[17:29] <erUSUL> !ask | mushmouse
[17:30] <marc1453> ikonia: I am using xubuntu.  The network browser must not be installed (xubuntu is the one configured for older hardware, they must have left that one out)
[17:30] <mushmouse> ok, when i minimize anything its disapears
[17:30] <lorenzosu> How can I find out if an environment variable exists, and possibly create/modify it?
[17:30] <ikonia> marc1453: ahhh xubuntu
[17:31] <ikonia> marc1453: that makes more sense, I don't know about the xfce layout off the top of my head, but people in #xubuntu will
[17:31] <lonng> ping
[17:31] <erUSUL> lorenzosu: type "env2 that will list all variables defined
[17:31] <sammy> can I not put an apt:// link in the ubuntu community documentation?
[17:31] <BNegetive> so can someone help me with the languages?
[17:31] <erUSUL> mushmouse: if you do alt + tab they do not appear either?
[17:31] <erUSUL> lorenzosu: "env"
[17:31] <marc1453> thanks, will do.  Much appreciate the help... you made me realize me mistake (and in the process made me feel less the fool ... because it just ain't there)
[17:32] <aboSamoor> I am trying to add a local apt mirror I can open the folders using firefox, while apt-get give me 403 error ?
[17:32] <lorenzosu> erUSUL: Thanks.
[17:32] <sammy> I answered my own question, no, only http https ftp and file are supported as configured.
[17:32] <nrune> any xfs experts?
[17:32] <lorenzosu> How to creat/modify and evnironment variable?
[17:33] <mushmouse> erUSUL: they do appear when i do alt+tab
[17:33] <erUSUL> lorenzosu: just assing a nw content and export it
[17:33] <erUSUL> lorenzosu: export VAR=whatever
[17:33] <BNegetive> can someone help me instaal more languages to the key board that i can type? =\
[17:34] <erUSUL> mushmouse: you have to add a "window list" applet to your pannel right click on it and choose add to panel
[17:34] <jiffe20> anyone gotten video streaming out to work from vlc correctly?  I am getting it to stream, but after a second it becomes very distorted
[17:34] <jiffe20> it is very distorted in the local vlc player
[17:34] <nrune> I believe that xfs defrag was running when the system lost power, on reboot the hard drive has been running solid for last 2 hrs.
[17:34] <mushmouse> erUSUL: thanks that works
[17:34] <erUSUL> lorenzosu: if you want it to be permanent add that to bashrc or .profile or /etc/environment depending on your needs
[17:34] <erUSUL> mushmouse: no problem
[17:35] <SmileDay> help ca-ceftificates configuration
[17:35] <SmileDay> help ca-ceftificates configuration I want defuld(?) value.
[17:36] <lorenzosu> erUSUL: Thanks
[17:36] <finer_recliner> can someone help me: i just installed 8.10, but when i log in, GNOME doesnt load. the mouse works, but not the keyboard
[17:36] <shad_> any body can tell me how to install sound driver for amd without net
[17:37] <SmileDay> help ca-ceftificates configuration
[17:37] <Guest60770> ola alguem poderia me ajuda a fazer funcionar o microfone no msn?
[17:37] <blackjak> guys does anyone know why when I press ctrl and a letter in the terminal it starts to write in other language
[17:38] <blackjak> this is happening while I'm pressing the ctrl key
[17:38] <erUSUL> !pt | Guest60770
[17:38] <nrune> Anyone know about xfs issues?  Help
[17:39] <juan__> hola
[17:39] <benc> I've installed the eclipse package. How can I know in which folder ubuntu installed it?
[17:39] <erUSUL> !es | juan__
[17:39] <dlstyley> I can't get a USB mouse working proper in Intrepid.  right mouse click works, but nothing else (pointer doesn't move, left click nothing).  "xinput test" shows that all buttons work
[17:39] <Guest60770> brigadão
[17:39] <erUSUL> benc: dpkg -L packagename
[17:39] <Myrtti> benc: if you installed it with package management, you don't particularly need to know where it's installed to though
[17:40] <tlchack5> how can i tell which distro xubuntu is? (i.e. dapper, feisty,hardy, etc)
[17:40] <benc>  Myrtti: I'm trying to install flexBuilder for linux and it requires the root eclipse folder
[17:40] <ubuntistas> how can i uninstall completely kubuntu?
[17:40] <blackjak> I can not press ctrl+ C in the terminal
[17:40] <Uldtot> Hello. I need someone who can help me with "webmin" when i try to install "vsftpd"  i have to select j/n  (yes or no)   how to select in Shell Command?
[17:41] <erUSUL> !webmin | Uldtot
[17:41] <Uldtot> !ebox
[17:41] <erUSUL> !puregnome | ubuntistas
[17:41] <lonng> kkkkkkkkkkkkkkkkkkkkkkkkkkkk
[17:41] <lonng> ioooooooooooooooooooooooooo
[17:42] <zeralda> i cant use my webcam
[17:42] <Uldtot> Thank you. I try that, wehn i find out hwo to install it. remotly lol _D
[17:42] <keystr0k> any idea why "recordmydesktop" puts my Xorg process over 100% cpu usage ?
[17:42] <tlchack5> anybody know how to tell what distro an OS is? (i.e. hardy, dapper, fiesty, etc) ... sorry im new to linux
[17:42] <erUSUL> !version | tlchack5
[17:42] <keystr0k> I cannot get ANY desktop recording software to work...  xvidcap only records a split second... recordmydesktop and istanbul crash pretty quickly.
[17:42] <zeralda> my webcam does not work
[17:42] <erUSUL> !webcam | zeralda
[17:42] <zeralda> any idea
[17:43] <dlstyley> anyone have suggestions on my usb mouse problem
[17:43] <tlchack5> thank you
[17:43] <keystr0k> using Compiz (tried without... same problems)
[17:43] <erUSUL> keystr0k: becouse it is recording your desktop ? ;P
[17:43] <benc>  erUSUL: thanks
[17:43] <dipset> hi guys, is it possible to copy your ubuntu kernel configurations to gentoo, and if so could someone tell me how?
[17:43] <freegoo> ki
[17:44] <erUSUL> dipset: copy the config file /boot/config-2.6.27-11-generic or whatever version
[17:44] <tlchack5> ok... this is gunna sound bad.. how do i open a shell?
[17:44] <keystr0k> erUSUL, huh? heh.
[17:44] <erUSUL> dipset: but keep in mind that the ubuntu 8like the gentoo) kernel is patched so if you want the exact same results you have to copy the kernel sources too
[17:45] <keystr0k> erUSUL, recordmydesktop won't even let me move it's control window... I haven't even started recording and that one creams my xorg process
[17:45] <dipset> erUSUL: how do i copy the kernel sources?
[17:45] <erUSUL> keystr0k: well i'm sorry i've never used the program so dunno if its normal or hat is happening
[17:45] <Uldtot> erUSUL > i want to try ebox. i looked at the link the bot posted :) and when i enter "sudo apt-get install “^ebox-.*” "  i get "E: Kunne ikke finde pakken “^ebox-.*”"    (could not find... bla bla bla)... how to install ?
[17:45] <erUSUL> dipset: install them in ubuntu you get them tared up in /usr/src/
[17:45] <ronny> hi
[17:45] <erUSUL> !info ebox
[17:46] <shad_> erUSUL, how i install sound and video codecs for my ubuntu 8.04 without apt-get
[17:46] <keystr0k> erUSUL, have you used xvidcap ?
[17:46] <ronny> im im search of a reasonable MUA thats cappable of imap + mail filtering, any sugestion for lean tools?
[17:46] <erUSUL> Uldtot: it should be there itr is in universe
[17:46] <tlchack5> !shell |tlchack5
[17:46] <erUSUL> shad_: sound drivers are installed by default with the kernel... if sound is no working you should find out why
[17:47] <zeralda> i just installed ubunu now and the sound is too lower
[17:47] <erUSUL> !sound
[17:47] <OriWB_> Can somebody please help me understand instructions on the internet for how to get my scanner to work? its all there, i just am not sure exactly how to do it.
[17:47] <Uldtot> erUSUL > okay thank you.
[17:47] <zeralda> wht should i do
[17:47] <erUSUL> Uldtot: no problem
[17:47] <dlstyley> usb mouse anyone?  it does work under XP
[17:48] <shad_> erUSUL, i know but movie player need some codecs which i want to install without apt-get
[17:48] <mlalkaka> hi everyone. is there a way to manage/configure bridge interfaces using NetworkManager?
[17:48] <erUSUL> dlstyley: happens since upgrade to intrepid? or is fresh install?
[17:48] <erUSUL> shad_: w32codecs ?
[17:48] <boaty> I have discovered my webcam is not automatically support: https://wiki.ubuntu.com/HardwareSupportComponentsMultimediaWebCamerasLogitech. ID - 046d:0920. It says: After compilation of the module using [spca5xx] . As I am a bit new to this. I am not sure what this means. Thanks
[17:49] <sveinung> Is there a way to publish html scripts on the internet?
[17:49] <WebcamWonder> Quick question, how do I check my swap size?
[17:49] <erUSUL> mlalkaka: no that i know of... better use /etc/network/interfaces
[17:49] <dlstyley> happened since I swapped mice and then swapped back.  was having a bunch of trouble.  turned out that then mouse I was using was causing probs (an old serial mouse).  Now I switched back to usb but no joy.
[17:49] <erUSUL> WebcamWonder: «free» on terminla
[17:49] <mlalkaka> erUSUL: ok thanks. i just thought i'd check before manually editing interfaces
[17:50] <WebcamWonder> erUSUL, Cool, thanks
[17:50] <ubuntistas> how can i completely remove kde-desktop and its programs?
[17:50] <shad_> erUSUL, my system doesnot show resolution more than 800 X 600
[17:50] <dlstyley> part of the problem is I can't make heads or tails of this new hal/xinput stuff compared to old xorg.conf
[17:50] <sveinung> does any one now about a way to publish html scripts on the internet?
[17:50] <ubuntistas> also switch user doesn't appear in panel when i i just installed kubuntu
[17:51] <ikonia> sveinung: thats not an ubuntu support question
[17:51] <WebcamWonder> !offtopic | sveinung
[17:51] <erUSUL> dlstyley: neither do I :| glad my mouse just works ...
[17:51] <ikonia> sveinung: researh "websites"
[17:51] <Uldtot> erUSUL >found out hwo to install it. now i get the problem , i cannot press yes or not to allow the install. is there any way to make webmin accept Y and N ?
[17:51] <erUSUL> !reolution | shad_
[17:51] <erUSUL> !resolution | shad_
[17:51] <dlstyley> my new xorg.conf has no mention of a mouse.  should it?
[17:52] <erUSUL> dlstyley: newer xservers do not need xorg.conf but will follow it if one is present
[17:52] <ubuntistas> how can i completely remove kde-desktop and its programs?
[17:52] <ubuntistas> also switch user doesn't appear in panel when i i just installed kubuntu
[17:52] <OriWB_> Can someone please look at something for me, and help me understand it?
[17:52] <erUSUL> dlstyley: so if you add a mouse section they will "abey" it and not use autoconfiguration
[17:52] <erUSUL> ubuntistas: already told you
[17:53] <ubuntistas> my pc froze
[17:53] <erUSUL> !anyone | OriWB_
[17:53] <ubuntistas> erUSUL
[17:53] <erUSUL> !puregnome | ubuntistas
[17:53] <ubuntistas> all this line?
[17:53] <dlstyley> its like the mouse is recognized (based on lsusb, xinput, etc.) but it isn't "set" to be the pointer.  when I run "xinput set-ponter", I get a "BadDevice" error
[17:54] <erUSUL> ubuntistas: that's what the factoid says
[17:54] <Swammy> Sorry all. I am trying to have my OSX86 partition boot on the grub boot menu. My problem is I cannot figure out what root to boot it in in the boot/grub/menu.lst If you have a second could you look at this image and tell me if my partitions are correct? http://i40.tinypic.com/102p5dj.png
[17:55] <OriWB_> To EVERYONE: there are instructions to replace several words in a file to others. But my file isn't exactly like the way i understood it. Can someone hep me?
[17:55] <ZipmaO> Hi, I'm having a problem getting php mail function to work on my ubuntu web server. Someone's got a hunch?
[17:56] <erUSUL> OriWB_: how is your file like?
[17:56] <jiffe20> any idea why my page up/down buttons stopped working all of a sudden ?
[17:56] <jiffe20> grr, they're using the arrow keys instead
[17:56] <OriWB_> erUSUL:can i send it to you directly?
[17:56] <erUSUL> !pastebin | OriWB_
[17:56] <jiffe20> even with numlock on
[17:57] <jiffe20> is that a hardware issue or an OS issue?
[17:57] <OriWB_> erUSUL: i dont know how to do that...
[17:58] <erUSUL> OriWB_: just copy and paste in that page a portion of your file then give here the url
[17:58] <ubuntistas> erUSUL my switch user doesn't appear in panel any clue?
[17:58] <erUSUL> OriWB_: also what do you want to search replace?
[17:58] <erUSUL> ubuntistas: nope
[17:59] <ubuntistas> i press reload but nothing
[17:59] <ZipmaO> Someone know's how to configure a mail server to send mails through isp:s smtp server? Which server doesn't matter.
[17:59] <gnu_d> Hi, I can't make the webcamera to work, it's Z-Star webcam, I'm on Hardy Heron, is there any way to make it work ? - btw, dmesg gives me: "[14944.524442] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: VIDIOCMCAPTURE: invalid format (7)".
[17:59] <OriWB_> urUSUL: did you get it?
[18:00] <OriWB_> urUSUL: i dont think so...
[18:00] <OriWB_> urUSUL: what do i type in the poster?
[18:01] <gartral> hello, can anyone recommend an audio recorderr that isnt as advanced as audacity?
[18:01] <gnu_d> Hey, help me, I have to fix this computer.
[18:01] <b0xer> which is the bist distro of linux servers?
[18:01] <erUSUL> !offtopic | b0xer
[18:01] <OriWB_> urUSUL: did you get it now?
[18:01] <erUSUL> OriWB_: whatever you want
[18:02] <erUSUL> OriWB_: you have to post here the url
[18:02] <WebcamWonder> gardar: arecord on commandline?
[18:02] <Ari> Hey folks, I'm installing ubuntu for the first time, and after a point the install seems to stop running - the screen just goes blank.  I am installing on a T20 thinkpad laptop.  Any suggestions?
[18:02] <gartral> WebcamWonder: were you talking too me? gardar isnt in the list
[18:03] <WebcamWonder> gartral: Oh, sorry. Yeah that was for you
[18:03] <WebcamWonder> Ari: If you let it run for a couple of minutes, it should come back
[18:04] <gnu_d> Come on, please about my webcam.
[18:04] <NeoDragon> Hi, this might not be the right place to ask, but is there a program I can install on Ubuntu Hardy to enable touchscreen capabilities on a Tablet PC such as the Fujitsu LifeBook U810?
[18:04] <milkncat> Just downloaded ubuntu 8.10 dvd iso. Can't install cause of my raid system which is a bios raid of 2 200mb hdd. is there a way to make ubuntu recognize this?
[18:04] <WebcamWonder> !webcam | gnu_d
[18:04] <WebcamWonder> !raid | milkncat
[18:05] <milkncat> WebcamWonder thank you
[18:05] <gartral> WebcamWonder: no worries, thats what the TAB key is for (webc{TAB}= WebcamWonder) but ontotopic: i would prefer one othe a GUI fronend
[18:05] <OriWB_> erUSUL: shoot i gtg. thanx foroffering to help, and sorry forbeing annoying
[18:05] <WebcamWonder> gartral: I know tab completion. And apparently gardar is on the tab completion, that is how I got that nick
[18:06] <SoulSeek> anybody use getcertify4less for linux+ ?
[18:06] <gartral> ohh.. i missed his name
[18:06] <chawarma> Flash player doesn't work good on linux comparing with windows, the videos of youtube are slow, I installed the .deb flash player from the official web site of adobe
[18:07] <WebcamWonder> gartral: There is a built-in soundrecorder, I haven't tried it
[18:07] <SoulSeek> (I can say I was referred)
[18:07] <WebcamWonder> chawarma: Yes. It is a known issue. Since Flash is closed source, we cannot do anything about it, other than recommending Flash PLayer 10
[18:07] <Redragon> I really did not want to have to come in here and bother you folks with my ineptitude. But it seems I have nowhere left to go.
[18:08] <chawarma> ok
[18:08] <WebcamWonder> Redragon: That is fine. This is what we are here for
[18:08] <martin__> :)
[18:08] <Redragon> I am trying to install a piece of software. I have already extracted the file, but cannot seem to install the package beyond that.
[18:09] <jrib> Redragon: be more specific...
[18:09] <WebcamWonder> Redragon: What software are you installing? If you are installing on already in the repos, please give preference to those first
[18:09] <martin__> Redragon,  make a script downloading in the web the file that you newed
[18:09] <martin__> ande put the extencion
[18:09] <martin__> :)
[18:10] <Ari> Thank you webcamwonder.  Also our bios is password-protected.  We have disabled that to see if there's different behavior (this is the T20).
[18:10] <Redragon> I downloaded the software from http://www.wwmkr.com/
[18:10] <sulumar> can anyone tell me how i can associate the teamspeak protokol with the corresponding application in firefox
[18:10] <Redragon> using firefox it downloaded to my desktop
[18:10] <Evilrick> I got a problem with 8.04 HH, as of a few weeks ago my removable media stopped automounting. MMC cards USB disks and the CD rom drive. I can still mount them manually with sudo mount so its not a hardware issue. If I log into Gnome as root then the automounting works. I have checked my settings in gconf-editor and the settings in my user administration tool. Any Ideas? here are my subsystem...
[18:10] <Evilrick> ...logs http://paste.ubuntu.com/117863/
[18:11] <WebcamWonder> Redragon: What is this software?
[18:11] <Redragon> I extracted the file and now have 5 seperate files on my desktop, none of which seem to indicate instructions.
[18:11] <jrib> Redragon: if you trust the source, double click on the .deb...
[18:11] <WebcamWonder> !find wwmkr
[18:11] <Rhapsody> Argh. I need the GIMP to whirl part of an image for me. It'll quite happily do this. To the centre of the image. I need it to do this at the bottom righr corner. How do I make it do this?
[18:11] <angeliunis_> WHO CAN HELP WITH LINUX UBUNTU??
[18:11] <jrib> angeliunis_: please just ask your question (without the caps)
[18:12] <Redragon> It is software for creating projects. I personally am a writer. The software is designed to help with the novel writing process. Just thought I would give it a look.
[18:12] <NeoDragon> I don't want to be a bother, but I could not find anything helpful elsewhere, is there a program I can install on Ubuntu Hardy to enable touchscreen capabilities on a Tablet PC such as the Fujitsu LifeBook U810? I would like to install Hardy on it.
[18:12] <WebcamWonder> Redragon: Just double click on the corresponding .dev
[18:12] <angeliunis_> Someone in private can help with Linux Ubuntu? I have troubles with my external hard drive.
[18:13] <gnu_d> I did everything in the link, the webcamera is still not functioning.
[18:13] <WebcamWonder> Redragon: The _all.deb
[18:13] <jrib> !ask |
[18:13] <jrib> angeliunis_: ^
[18:13] <martin__> ~~~~*
[18:13] <Redragon> I will do that. Give me a moment
[18:13] <jiffe21> anyone have any idea why my numpad doesn't work anymore?  it is controlling the mouse now
[18:13] <martin__> Evilrick,  what you mean
[18:14] <Cpudan80> jiffe20: Yes, mouse keys
[18:14] <gnu_d> jiffe21: press shift + numlock
[18:14] <tlchack5> im trying to install tuxguitar and when i download it i get this .bin file, what do i do with it?
[18:14] <Cpudan80> jiffe20: Settings --> Prefs --> Keyboard --> Mouse Keys --> uncheck the box
[18:14] <WebcamWonder> !find tuxguitar
[18:14] <WebcamWonder> tlchack5: sudo aptitude install tuxguitar, on terminal should install it
[18:14] <Evilrick> martin__: mean when I plug in media it doesnt appear on my desktop as it normally used to.
[18:14] <tlchack5> thank you
[18:14] <Ari> Webcamwonder, how long should I give it before it comes back?
[18:15] <jiffe21> ah, good deal
[18:15] <WebcamWonder> Ari: Is the hdd wokring? And the CD-ROM?
[18:15] <vizpal>  has joined #ubuntu
[18:15] <Ari> no, neither is working.
[18:16] <martin__> Evilrick,  What tipe off media you plug in
[18:16] <gnu_d> I reloaded the gspca kernel module, but still I can't see video ?
[18:16] <gnu_d> why ?
[18:16] <NFischer> is there a possibility to boot without wifi drivers? interpid is giving me a kernel anic and i think the villain is my wifi card..
[18:16] <jrib> angeliunis_: please do not pm me.  Just ask your question in this channel.  If someone can help you, they will
[18:16] <oCean__> Redragon: I don't know if you've already succeeded to install (got disco for a minute) but I find wwmkr-qt in repo
[18:16] <fow> gnu_d, what kernel version?
[18:16] <angeliunis_> sorry soryy jrib
[18:16] <Evilrick> martin__: any media, cdrom, mmc card usb disk. does not mount any of them anymore
[18:17] <gnu_d> fow: 2.6.24-16-generic
[18:17] <martin__> u know this line in your console
[18:17] <angeliunis_> Someone in private can help with Linux Ubuntu? I have troubles with my external hard drive. Please private
[18:17] <martin__> Evilrick,  /dev/input/event0
[18:17] <jrib> angeliunis_: ugh.  ASK YOUR QUESTION
[18:17] <oCean__> Redragon: since wwmkr has dependencies on gambas2, The easies way to install would be "sudo apt-get install wwmkr-qt"
[18:17] <fow> angeliunis_, why private?
[18:17] <gnu_d> fow: what to do now ?
[18:17] <angeliunis_> dont u see quationmark???
[18:18] <martin__> sudo nano gedit /~~* and _(_ Abour Evilrick
[18:18] <Num83rGuy> My network and sound stopped working today when I turned on my computer, yet the live CD works and I do not remember changing any settings.
[18:18] <erUSUL> !pm | angeliunis_
[18:18] <fow> gnu_d, no clue
[18:18] <jrib> angeliunis_: just state what the problem is
[18:18] <martin__> sudo or nano whatever
[18:18] <gnu_d> fow: why did you ask me the kernel version then ?
[18:18] <fow> gnu_d, I know that with 2.6.28 gspca behaves differently, as some drivers have been merged into the kernel and the rest don't compile
[18:18] <Bloc> hey
[18:18] <fow> gnu_d, with .24 though, I don't think I had any trouble
[18:18] <gnu_d> fow: so, I recompile shoud work ?
[18:18] <sara_> In evolution is there any way of running filters on the inbox? like telling the programme to "move all messages from the inbox to these folders, like you would with new mail"
[18:18] <fow> gnu_d, try .26 maybe? I know .26 works properly
[18:19] <Bloc> german ubuntu channel code pls
[18:20] <oCean__> !de | Bloc
[18:20] <Evilrick> martin__: Sorry, I dont understand.
[18:21] <martin__> MAKE A FOLDER
[18:21] <Bloc> thanks
[18:21] <martin__> sara
[18:21] <erUSUL> sara_: in the message menu there are options to make filters a rules
[18:21] <sara_> i made the filters for incomming mail
[18:21] <NeoDragon> Is there touch screen capability for tablet PC's or is there a separate package I will need to download from the repos?
[18:21] <letalis> is there anything in gnome that would work well for a program flowcharting software?
[18:21] <gnu_d> fow: I have Hardy, I haven't updated the distro, I cant find .26 kernel, where to find it ?
[18:21] <Bloc>  /join #ubuntu-de
[18:21] <eitreach> I'm trying to make usb work with virtualbox binary, but I can't seem to get it to work. Any suggestions?
[18:21] <erUSUL> sara_: mine work as expected
[18:22] <Bloc> sorry ;-)
[18:22] <letalis> eitreach: is it the sun version or the free version?
[18:22] <erUSUL> eitreach: ask in #vbox
[18:22] <martin__> all are stings men think about the lines open the file wen report ass a text mode and modific the value too correct labels too work Evilrick
[18:22] <eitreach> letalis: the version downloaded from sun's own site.
[18:22] <martin__> :)
[18:22] <DasEi> eitreach:a quest for virtualbox, but you need the prop. version of their homepage, free for personal use
[18:23] <Num83rGuy> My network and sound stopped working today when I turned on my computer, yet the live CD works and I do not remember changing any settings.
[18:23] <letalis> eitreach: the device works best if its disabled in linux for the guest oerating system to have full access to it.
[18:23] <|hashbang|> !seen
[18:23] <Evilrick> martin__: sorry but I cannot understand your english.
[18:23] <eitreach> letalis: how do I do that?
[18:23] <bartmon> hey guys. anyone know of a good benchmark suite? Google offers a few but i don't know which is ok...
[18:23] <letalis> usually you have to specify the devies in advance and let vbox take over control of them while the vm is in use
[18:23] <martin__> well I try :)
[18:24] <eitreach> right..
[18:24] <letalis> vm handles it, but you have to specify what in the usb configuration of vbox as to what it will take over
[18:24] <Num83rGuy> photronix has one
[18:24] <eitreach> letalis: the filters thing?
[18:25] <letalis> like a printer available to vbox usually becomes inacessible to the host system, (im assuming linux in this case)
[18:25] <letalis> yes
[18:25] <eitreach> alright. so I mark the devices that I want to use with vb?
[18:25] <letalis> yes
[18:25] <uski> hello; i would like to use packages fro, jaunty in intrepid, is that possible? how? thanks. (i'm having huge issues with pulseaudio and people reported the issues to be fixed by using more recent packages)
[18:25] <letalis> when the vm is in use the host will more than likely lose access to them
[18:25] <bartmon> Num83rGuy: Yes, i guess i'll just use that suite since phoronix is quite a credible site
[18:26] <letalis> devices dont like to fight with two osses on the usb bus at the same time and they rarely play nice if both have access to it at the same time
[18:26] <WebcamWonder> uski: It is possible but not recommended as other packages might depend on an older version, and you might end up with broken packages
[18:27] <Mez> hey, anyone know how to stop SSH hanging when I leave it idle? I know putty has an option to do that (the timeout option) but I cant seem to find the config option to do it in my ssh config on ubuntu
[18:27] <letalis> back to my question what would work well as a program flowcharting software in gnome?
[18:27] <ktebit> what's the named designation of ubuntu 8.10? feisty?
[18:27] <letalis> anyone got any ideas?
[18:27] <uski> WebcamWonder, i see; thanks. Is there a way to use a bluetooth headset that "just works"? preferably avoiding using pulseaudio
[18:27] <WebcamWonder> !intrepid | ktebit
[18:27] <bartmon> Mez: i think keep-alive isn't available
[18:27] <erUSUL> letalis: oo.org draw; dia; venerable xfig ?
[18:27] <WebcamWonder> uski: I don't know. I have never worked with bluetooth before
[18:27] <letalis> cool ty erUSUL
[18:27] <uski> WebcamWonder, ty
[18:28] <fiftyone> hello, anyone use opera here?
[18:28] <letalis> im learning c and i figure that drawing a flowchart for programs first will help me keep it together while i code it.
[18:28] <Mez> bartmon: I'm pretty sure it is, somewhere :D
[18:28] <fiftyone> i'm wondering if it is just me or does the opera install not include a launcher?
[18:28] <angeliunis_> opera sucks get firefox fiftyone
[18:28] <WebcamWonder> fiftyone: ALT + F2 -> opera, see if that fires up opera
[18:29] <WebcamWonder> !language | angeliunis_
[18:29] <IntuitiveNipple> letalis: See dia
[18:29] <sara_> thanks
[18:29] <til-hips> bonjour   bonjour
[18:29] <letalis> okay :)
[18:29] <zelda> are you serious? sucks is a bad word?
[18:29] <erUSUL> !who | sara_
[18:29] <cell> hi there
[18:29] <bartmon> Mez: a quick google search http://ubuntu.wordpress.com/2006/02/03/keeping-ssh-sessions-alive/
[18:29] <zelda> get a life man. It was an opinion
[18:29] <angeliunis_> zelda i agree, its not!
[18:30] <til-hips> i am paumé !!!
[18:30] <gnu_d> fow: is this package ok>
[18:30] <gnu_d> kernel-image-2.6.27-7-generic-di ?
[18:30] <WebcamWonder> !fr | til-hips
[18:30] <stefg> s/sucks/creates_a_vacuum
[18:30] <anom01y> anyone know how to format a usb stick from xfce ?
[18:30] <zelda> !abuse | WebcamWonder
[18:30] <fow> gnu_d, sure
[18:30] <WebcamWonder> zelda: Excuse me?
[18:30] <sara_> erUSUL thanks
[18:30] <Rizha> heloo i have troble with video card ati HD 4670, display erro with that card.. did someone can help resolv the problem
[18:31] <Redragon> I apologize for my absence. Were you suggesting I download the debian version of wwmkr?
[18:31] <Mez> bartmon: I'll look, but just found TCPKeepAlive
[18:31] <NeoDragon> Is there touch screen capability for tablet PC's or is there a separate package I will need to download from the repos?
[18:31] <fow> anom01y, I'd just use the shell
[18:31] <gnu_d> fow: but is it ok to install Intrepid pkg on Hardy ?
[18:31] <WebcamWonder> Redragon: If there is a debian version available, yes, it is recommended over compiling from source
[18:31] <fow> gnu_d, why not just update?
[18:31] <NeoDragon> in xfce install gparted and you can format a usb stick from with gparted
[18:31] <anom01y> fow,  format: command not found
[18:31] <oCean__> Redragon: wwmkr-qt is in the repos.
[18:31] <fow> anom01y, what filesystem do you want to format the stick as?
[18:31] <anom01y> gparted ahh yes
[18:32] <gnu_d> gnu_d: cause this internet source is slow.
[18:32] <anom01y> vfat
[18:32] <Redragon> Is it okay to run use the debian version while running hardy heron?
[18:32] <oCean__> Redragon: so use next command to install, it will also resolve the gambas dependencies: "sudo apt-get install wwmkr-qt"
[18:32] <tanky_> hi all
[18:32] <stefg> anom01y: this ain't DOS :-)
[18:32] <fow> anom01y, mkfs.vfat /dev/sd??
[18:32] <anom01y> ok
[18:32] <anom01y> that works
[18:32] <fow> anom01y, I think you need dosfstools though
[18:32] <pietrubens> hello
[18:32] <anom01y> how do I determine where is the stick located in /dev ?
[18:32] <fow> where ?? were wildcards
[18:33] <pietrubens> i have opera 9.63, windows vista (i know, it's not ubuntu, but maybe someone can shed a light?), and i want to know how to change a backgroundpicture at the "dial-up" screen, instead of having to install a totally new skin
[18:33] <WebcamWonder> !offtopic | pietrubens
[18:33] <WebcamWonder> anom01y: sudo fdisk -l, should list you all the partitions
[18:34] <zelda> get gparted, it will do the same thing
[18:34] <ZX-Martin> hi all
[18:34] <NeoDragon> yes just get gparted from the repos it's alot easier
[18:34] <IntuitiveNipple> anom01y: You can look at the sym-links: ls -l /dev/disk/by-id
[18:35] <DjViper1> anyone know how to fix ndiswrapper?
[18:35] <chawarma> We can't make a partitions with gparted unless we use a live CD, true ?
[18:35] <anom01y> ahh yes gparted is nice
[18:35] <juvenil> a
[18:35] <anom01y> thanks all my probs are solved..
[18:35] <WebcamWonder> chawarma: You cannot resize active partitions without using LiveCD
[18:35] <zelda> no you can.
[18:36] <chawarma> ok
[18:36] <Evilrick> I got a problem with 8.04 HH, as of a few weeks ago my removable media stopped automounting. MMC cards USB disks and the CD rom drive. I can still mount them manually with sudo mount so its not a hardware issue. If I log into Gnome as root then the automounting works. I have checked my settings in gconf-editor and the settings in my user administration tool. Any Ideas? here are my subsystem...
[18:36] <Evilrick> ...logs http://paste.ubuntu.com/117863/
[18:36] <nite_johnboy> What is the default .PDF reader that installs with Intrepid Ibex ? ?
[18:36] <WebcamWonder> nite_johnboy: envice
[18:36] <oCean__> nite_johnboy: evince
[18:36] <erUSUL> nite_johnboy: evince
[18:37]  * erUSUL gg
[18:37] <WebcamWonder> Oops, yeah sorry. That was a bad typo
[18:37] <nite_johnboy> WebcamWonder; THanks much - using Okular - and couldn't remember what default app was - thanks.
[18:37] <ivo> does someone have ideas on improving security of .desktop files?
[18:38] <ivo> http://brainstorm.ubuntu.com/idea/18028/ what about this?
[18:38] <Num83rGuy> Can any one help me fix my network and sound?
[18:38] <WebcamWonder> Num83rGuy: Could you give us more info?
[18:39] <Num83rGuy> sure ether net card uses forceeth driver sount is intel ich
[18:39] <alucardromero> Hello, everybody! :)
[18:40] <fiftyone> WebcamWonder thanks alot.
[18:40] <alucardromero> Would anybody happen to know a fix for the firefox/flash/no sound issue for Intrepid?
[18:40] <alucardromero> Videos work great... MySpace, YouTube, and any other video site.  Just lacking sound.
[18:40] <WebcamWonder> fiftyone: If it works from ALT+F2, you can add a launcher to the menu by right click on it, end editing , and adding it manually
[18:41] <Num83rGuy> I am running the live cd right now and am having a bit of toruble finding the hardware spicifics. sorry.
[18:41] <binarymutant> alucardromero, most of the time if you restart firefox, or  kill it, it works
[18:41] <oCean__> alucardromero: what flash plugin? flashplugin-nonfree?
[18:41] <IntuitiveNipple> ivo: when I first saw the issue on LWM I thought the solution should be the file must be executable, but it would be nice to have a shebang line there in that case
[18:41] <alucardromero> No, the one from adobe.com
[18:41] <WebcamWonder> Num83rGuy: lspci, to get a list of all PCI based hardware, that should help you nail which cards you are running
[18:42] <fiftyone> webcamwonder, i have a related question. how do i find the code to launch a program if I want to create a custtom launcher or something. Forexample, the trash can, i want to create a custom launcher for trashcan how do i know what the command is to launch it...
[18:42] <Out_Cold> aren't they the same flash plugin?
[18:42] <oCean__> alucardromero: the 'flashplugin-nonfree' in the repos is Adobe's.
[18:42] <WebcamWonder> fiftyone: You want one on the desktop? Nautilus has an option (hidden) for that
[18:42] <oCean__> alucardromero: Using the one from the repos, is fine on video and sound (for me)
[18:42] <alucardromero> Yeah, I know that.  But would it matter if it was from the adobe site or from the repositories?
[18:42] <erUSUL> fiftyone: you can add a trash can to your desktop via gconf-editor
[18:42] <ivo> IntuitiveNipple: I think it should be executable only if it's not in /usr/share/applications
[18:43] <oCean__> alucardromero: don't know, the one from the repos works for me. Intrepid / ff 3.0.6
[18:43] <alucardromero> Okay, I'll see if I can't switch them out.
[18:43] <Num83rGuy>  nVidia Corporation MCP51 AC97 Audio Control for sound and nVidia Corporation MCP51 Ethernet Controller
[18:43] <alucardromero> Thank you for the help, I'll let you know how it turns out.
[18:43] <ivo> IntuitiveNipple: that will save a lot of re-packaging ;)
[18:43] <DjViper1> hi can anyone help me with ndiswrapper and broadcom 4306rev02 ?
[18:43] <IntuitiveNipple> ivo: The thing is, the 'x' permission usualyl infers the file is directly executable. In the case of a .desktop, without a shebang line, it won't be.
[18:43] <erUSUL> DjViper1: you should be using native b43 driver
[18:44] <DjViper1> erUSUL: doesnt work
[18:44] <erUSUL> DjViper1: did you installed b43-fwcutter ?
[18:44] <DjViper1> no
[18:44] <trigoman> Hell guys I'm a looking for a way to interact with GConf-Editor in Ubuntu. So far I've found GConf--. Is that the right way to go?
[18:44] <AETE_KRAOUD> join #python
[18:44] <NeoDragon> Is there touch screen capability for tablet PC's or is there a separate package I will need to download from the repos?
[18:44] <gartral> how do i record wit arecord?
[18:44] <fiftyone> just me or is the chat unusually slow today?
[18:44] <nite_johnboy> Is Okular PDF reader the default .pdf reader in the KDE version of Ibex ? ?
[18:44] <erUSUL> DjViper1: ... well no wonder it does not work...
[18:44] <AETE_KRAOUD> hi
[18:45] <erUSUL> DjViper1: install the package (needs inet connection)
[18:45] <Num83rGuy> I am not certain what happened I turned om the computer this morning and no net no sound.
[18:45] <WebcamWonder> erUSUL: Quick question. Do you remember if the Hardware Drivers in Intrepid installs b43-fwcutter?
[18:45] <DjViper1> erUSUL: which pkg?
[18:45] <erUSUL> DjViper1: b43-fwcutter
[18:45] <erUSUL> WebcamWonder: no; i dunno i do not have a broadcom card
[18:45] <nickrud> Num83rGuy, start by looking in /var/log/dmesg ; see if some hardware wasn't recognized properly
[18:45] <IntuitiveNipple> ivo: Do you now which executable Gnome would need on the shebang line? I'm not sure... possibly nautilus?
[18:47] <ivo> IntuitiveNipple: I think the code that executes .desktop files is not in nautilus executable, it's in a library. Possibly libnautilus (if there is), but I'm not sure.
[18:47] <martin__> ooo
[18:48] <DjViper1> erUSUL: okay, installing it now
[18:48] <IntuitiveNipple> ivo: might be worth finding out and posting an example on the brainstorm page showing how it could work
[18:48] <chawarma> what I have to install to read the .flv files under Ubuntu ?
[18:49] <ivo> ok, I'll try
[18:49] <^cicciuzzo^> Un Saluto a tutti «  #ubuntu » [Þrison-ßreak][§cript]       
[18:49] <^cicciuzzo^> ÇÏÅØøØø
[18:49] <letalis> chawarma: one of the gstreamer plugin sets supports is
[18:49] <^cicciuzzo^> !list
[18:49] <letalis> it
[18:49] <martin__> att any one can tell me how a grab a video off my desktop any on
[18:49] <letalis> because totem has a youtube plugin
[18:49] <Pilot_51> How do I prevent nvidia-settings from re-adding MetaModes that I removed?
[18:50] <^cicciuzzo^> !
[18:50] <sirhc_> can anyone help me out... trying to set up an ATI USB remote
[18:51] <DasEi> sirhc_:?? kind of device ?
[18:51] <bubba> im looking for a command line program that mirror a file structure on an external driver whilst just updating changed files
[18:51] <Num83rGuy> nicrud: the logs show that everything loaded fine.
[18:52] <oCean__> bubba: guess rsync is capable of that.
[18:52] <chawarma> ok thanks letalis
[18:52] <bubba> rsync is just the program im out for! thanks
[18:52] <Bodsda> Hi, i have a folder full of 20 .flv files, how can i turn them all into .mp3's prefferebly with ffmpeg in 'one' command?
[18:52] <sirhc_> ATI remote wonder model# 5000023600
[18:53] <mirak> hi
[18:53] <nickrud> Num83rGuy, have you checked /var/log/syslog ?
[18:53] <sirhc_> my research shows many have gotten them to work but i can't seem to duplicate their results...
[18:54] <gartral> how do i record wit arecord?
[18:55] <Num83rGuy> nicrud: Actually I checked the logs first thing and could not see any thing wrong So I believe I updated something that is causing the problem.
[18:56] <NFischer> !nopaste
[18:56] <mirak> I have a problem with a dvb card ir receiver . The probleme is that the IR is on /dev/input/event5 have a handler like this H: Handlers=kbd event5 . I don't want it bound to keyboards keys, this is not ok of course
[18:56] <s0u][ight> hello where does ubuntu heep the downloaded (to upgrade) packages?
[18:56] <s0u][ight> keep*
[18:56] <zash> Can someone help me with dovecot + maildir?
[18:57] <oCean__> s0u][ight: /var/cache/apt/archives I think is what you're looking for?
[18:58] <zash> I don't get new mail into my inbox after changing to maildirs
[18:58] <s0u][ight> oCean__, yep :D
[18:58] <limpc> hey. anyone here solve the video flickering issue with ati cards and compiz?
[18:58] <limpc> when i playback video it flickers like crazy.  opengl screensavers as well
[18:59] <alucardromero> oCean__: Did the recommended fix for Flash and no cigar.
[18:59] <kejava> tomorrow i plan to setup an ubuntu pc at a client's site.  they've given me a proxy.pac file which i know works fine with firefox.  i want synaptic to work for them too.  can that same proxy.pac file be used in synaptic's network preferences?
[18:59] <alucardromero> Does Firefox have a default sound device setting that I could peek at?
[19:00] <kejava> more ... i've read that adding export http_proxy="http://some_address.com/proxy.pac" to .bashrc may be the only way to get proxy support in synaptic
[19:00] <martin__> any can help whit that >>>> http://paste.ubuntu.com/117863/
[19:00] <oCean__> alucardromero: too bad. Since it works for me (and lots of others) it's probably not the plugin that fails.
[19:01] <bigbrovar> kejava: nope go to settings/preferences.network
[19:01] <mirak> is there a way to unload all modules of a device ? modprobe says they are in use, I can't find the good way to unload them
[19:02] <[OES]> Hi All.  How can I turn on passive mode fo FTP
[19:02] <kejava> bigbrovar: can one enter the proxy.pac file there?  or does it have to be an actual server address?
[19:03] <IntuitiveNipple> kejava: Yes, using export http_proxy=... in the log-in session that synaptic runs from will do it
[19:03] <fatbrain> how do I create a new admin account on my ubuntu server?
[19:03] <job> hi
[19:03] <bigbrovar> kejava> nope the protocol should be like proxy.someproxyaddress port=  3128 (or what ever proxy port u use )
[19:03] <Dat1> Hello, I want to delete a user that I don't recognize.  Under "User Settings", I see the user that I want to delete, but the delete button is not highlighted, and the unlock button is not highlighted either.  How can I delete a user then?
[19:04] <wintermu1e> hello. is there a thing in ubuntu thats like expose in mac? like when you bring the mouse to a hot area (top left corner) it changes desktop etc
[19:04] <bigbrovar> kejava> i live behind a proxy so i should know
[19:04] <job> I have this error :Error parsing proxy URL http://:8080/: Invalid host name. when I tried to install programs from the synaptic. Could anybody help me solve it please..
[19:04] <gg1234> hey guys
[19:04] <oCean__> fatbrain: "adduser" command
[19:04] <IntuitiveNipple> kejava: See this article: http://www.robgolding.com/index.php/2008/11/24/ubuntu-and-the-university-of-nottinghams-proxy/
[19:04] <Out_Cold> Dat1, if you don't have admin privileges you can not unlock the users
[19:04] <kejava> IntuitiveNipple, bigbrovar: thanks, i'll try both methods
[19:04] <fatbrain> oCean__: ok, do I add the newly created user to some group as well?
[19:04] <limpc> anyone here solve the video flickering issue with ati cards and compiz?  when i playback video it flickers like crazy.  opengl screensavers as well
[19:04] <gg1234> I need help doing a partition, I am currently running the Ubuntu 8.10 CD and I have windows installed please PM me
[19:04] <Dat1> ﻿Out_Cold: It's my machine
[19:05] <Dat1> ﻿Out_Cold: I have root password
[19:05] <oCean__> [OES]: on ftp command line? type "pa" on "ftp>" prompt
[19:05] <Out_Cold> Dat1, try pressing the greyed out unlock button
[19:05] <Jockeo> I just installed Ubuntu 8.10. When starting FireFox it is maximized so it overlaps the Ubuntu top and bottom panels (with the menu, system tray etc.). Also, the FireFox window doesn't have the standard window borders (it is chromeless). How can i fix this?
[19:05] <Dat1> ﻿Out_Cold: Nothing
[19:05] <[OES]> Thanks oCean__
[19:05] <gg1234> can someone help me?
[19:05] <carpii> Jockeo, try hitting F11, maybe its in fullscreen mode?
[19:05] <kejava> IntuitiveNipple: great link.  exactly what i was looking for :)
[19:06] <Dat1> ﻿Out_Cold:  I fear I've been hacked..
[19:06] <bigbrovar> kejava> cli command to use proxy u have to add export http_proxy=http://someproxyaddress: port number
[19:06] <Dat1> but there must be a way to remove the user if I have root pass
[19:06] <gg1234> need installation help
[19:06] <oCean__> fatbrain: the "adduser" is interactive. It wil (default) add the newuser to a primary group (with same name as the new user) like: "newuser" in group "newuser"
[19:06] <[OES]> oCean__  It ried this  root@de007277:/# "pa" on "ftp>"
[19:06] <[OES]> bash: pa: command not found
[19:07] <job> Error parsing proxy URL http://:8080/: Invalid host name.
[19:07] <job> Could anybody help me solving that error?
[19:07] <circusbred> -bash: /bin/rm: Argument list too long
[19:07] <circusbred> :(
[19:07] <Out_Cold> Dat1, that may be the case, you should be checking firestarter for traffic reports.
[19:07] <job> I'm running Ubuntu 8.10
[19:08] <oCean__> [OES]: my instruction were for commandline ftp, not graphical. On commandline ftp (e.g. started with "ftp" or "ncftp") you would be able to enter "pa" as a command, once having started "ftp"
[19:08] <Dat1> ﻿Out_Cold: When I run "sudo userdel username"  I get "user doesn't exist"
[19:08] <bigbrovar> job> are u behind a proxy server ..seems like a wrong proxy server address
[19:08] <Jockeo> bigbrovar: Thanks for helping. This is very strange. It was not in fullscreen mode, but if I changed it to fullscreen mode and then changed it back, it looked normal. But when restarting FireFox it looks strange again.
[19:09] <[OES]> Sorry im new and dont understand
[19:09] <oCean__> [OES]: for example "ftp hostname" would open an ftp 'shell' to the specified host
[19:09] <see_plusplus> Whats is the difference between Ubuntu server 8.04 and 8.10? What does "LTS" mean vs. non "LTS"?
[19:09] <job> I don't know exactly but I set the connecttion option to 'Directly connect to the internet'
[19:09] <gg1234> Need help doing a partion. Ubuntu recognizes my NTFS partitions in "My Computer" but in the instalation it thinks that the hard drive has no partions. However it does recognize my other hard drive that is partioned into  winXP and a pure data only partion. Please help.
[19:09] <carpii> long term support
[19:09] <[OES]> Ok ill go have a read
[19:09] <[OES]> Thank you
[19:10] <oCean__> [OES]: at that point, and after entering your login credentials, your prompt changes into something like "ftp>"
[19:10] <bigbrovar> Jockeo> i guess am missing something but what exactly is the problem
[19:10] <Jockeo> see_plusplus: 8.10 is a newer version. However, 8.04 has "Long Time Support" (LTS) wich is good for some users.
[19:10] <fatbrain> oCean__: yes, I noticed, but the new user isn't allowed to run sudo commands.
[19:10] <[OES]> Am running as root
[19:10] <oCean__> fatbrain: for that, the new user should be added to the 'admin' group
[19:10] <see_plusplus> Jockeo, sooo...whats the difference? Why would anyone get 8.04 if 8.10 is better?
[19:10] <gg1234> can some one PM me so they can help me with my problem?
[19:11] <zash> I cant access new mail with dovecot after changing to maildirs, where did i fail?
[19:11] <oCean__> [OES]: it is never wise to run 'as root'. You can run commands 'sudo' when necessary
[19:11] <gartral> gg1234: what is your problem?
[19:11] <Jockeo> bigbrovar: If you want to you can login using view-only VNC. Or I can try to explain it here.
[19:11] <see_plusplus> bot?
[19:11] <see_plusplus> !bot
[19:11] <gg1234> Need help doing a partion. Ubuntu recognizes my NTFS partitions in "My Computer" but in the instalation it thinks that the hard drive has no partions. However it does recognize my other hard drive that is partioned into  winXP and a pure data only partion. Please help.
[19:11] <usser> see_plusplus, stability
[19:11] <job> bigvrovar> I don't know exactly but I set the connecttion option to 'Directly connect to the internet'
[19:11] <see_plusplus> usser, 8.04 is more stable, then?
[19:11] <usser> see_plusplus, support, lts is supported for 3 years, while normal releases get 1 year support
[19:11] <nickrud> see_plusplus, best for large installations; the desktop is supported for a long time
[19:12] <usser> see_plusplus, definetely
[19:12] <see_plusplus> usser, which one would be more secure? also - I was referring to the server...thanks!
[19:12] <bigbrovar> job> if your are behind a proxy the setting to connect directly is a bad idea ..
[19:12] <fatbrain> oCean__: thanks
[19:13] <usser> see_plusplus, if i were to choose i'd pick 8.04
[19:13] <oCean__> fatbrain: glad to be of some help :)
[19:13] <job> bigvrovar> hmm.. How to know if I'm behind a proxy or not..?
[19:13] <gartral> gg1234: restrat your computer with the disk in the cdrom, and use the partition manager from the live OS too shrink your NTFS drive and add room for the new partition
[19:13] <gartral> restart*
[19:14] <bigbrovar> job> ask your network admin?
[19:14] <Hyty_087> ciao
[19:14] <job> bigbrovar> But I didn't have to key in any username or password before connecting to the internet..
[19:14] <job> bigbrovar> that error causes the installation of programs to fail.
[19:15] <bigbrovar> job> some proxy dont need authentication ..
[19:15] <job> bigbrovar> i see.
[19:16] <job> bigbrovar> but if I'm behind a proxy and I select the connection option to 'directly connect to the internet' then I should not be able to get on line, right?
[19:16] <job> bigbrovar> yet I'm here.
[19:16] <thedoor_> join #css
[19:16] <carpii> if the proxy doesnt require authentication, then its just olike having a direct connection
[19:16] <martin__> cp help
[19:18] <susan> .
[19:19] <alwayssleepy> hi all, quick question: how do i disable the annoying system beep on ubuntu, and also can i run beryl on a VM?
[19:19] <job> "Error parsing proxy URL http://:8080/: Invalid host name." Anybody has any idea about this? Please help..
[19:19] <Jockeo> bigbrovar: Thanks for helping me (and that you help others). I finally fixed it. I pressed F11 twice (to get the normal window), unmaximized, changed the window size and closed FireFox. Now it opens normally. (I don not know if the other mode was some strange mode or an actual bug, but it was not a normal maximized mode).
[19:20] <sam_> thanks Jockeo, I had the same problem, now it's fixed ;]
[19:21] <job> "Error parsing proxy URL http://:8080/: Invalid host name." Anybody has any idea about this? Please help..
[19:21] <Out_Cold> Jockeo, i get that occasionally too, where the window wrap has disappeared
[19:21] <job> "Error parsing proxy URL http://:8080/: Invalid host name." Anybody has any idea about this? Please help.. I tried to google it, no use.
[19:21] <Jockeo> sam_ and Out_Cold: Do you know the reason? Have you googled for it? Maybe we should file a bug?
[19:22] <Jockeo> (I googled but couldn't find it)
[19:22] <blackjak> hi guys
[19:22] <sam_> I did googled it too... nothing find =[
[19:22] <blackjak> what this does it mean  :
[19:22] <blackjak>  Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
[19:22] <Out_Cold> i didn't know... it's easier for me to press f-11 twice than try that... i usually use lynx though.
[19:23] <oCean__> blackjak: use "sudo" running apt / aptitude / dpkg etc
[19:23] <Jockeo> blackjak: If you install software using Synaptic and "Add/Remove" at the same time, close one of the windows.
[19:23] <sirhc_> can anyone help me out... trying to set up an ATI USB remote model 5000023600 using gnome-lirc-properties
[19:23] <sam_> are you guys using compiz ? maybe Firefox is glitching because of that
[19:23] <job> "Error parsing proxy URL http://:8080/: Invalid host name. andale32.exe: No such file or directory" What dose this mean?
[19:23] <blackjak> 10x it was the synaptics
[19:24] <bigbrovar> job> can u pastebin the content of less /etc/apt/apt.conf
[19:24] <Jockeo> sam_: Is compiz included in the standard install? If it's not, then I don't use it.
[19:24] <kroisis> can anybody send me to an example of "dpkg-preconfigure" or "dpkg-configure" sending parameters to ipmasq without needing to be interactive? I've been googling it to death, no luck.
[19:24] <sam_> it's not
[19:24] <Jockeo> blackjak: np.
[19:24] <job> bigbrova> I'll try. Thanks :-)
[19:24] <Dat1> Can anyone else help me try to delete this user?
[19:25] <job> bigbrova> but what is pastebin?
[19:25] <carandraug> Dat1: userdel ?
[19:25] <beast_> Dat1:  Can't you just remove them from /etc/passwd?
[19:25] <Titan8990> Dat1, its usually custommary to just lock the user account with:   sudo passwd -l USER
[19:25] <oCean__> !pastebin | job
[19:25] <Titan8990> Dat1, I recommend against beat_'s suggestion
[19:25] <Dat1> Thanks guys, I'll try those things
[19:26] <G-Bleezy> Hey where can i check to see if Ubuntu will work with my motherboard??
[19:26] <Titan8990> Dat1, but if you did you would also want to remove from /etc/shaddow and /etc/group
[19:26] <Out_Cold> Dat1, you tried deluser 'user'?
[19:26] <bigbrovar> oCean_: thanks
[19:26] <Schuenemann> how do I stop apache?
[19:26] <Dat1> ﻿Out_Cold: yes
[19:26] <cell> hi there, i wonder it that, is there any addon or program images or .iso's on the ubuntu.com? i didnt find yet. :(  Can anybody send all link to my pm?
[19:26] <oCean__> !hcl | G-Bleezy
[19:26] <Titan8990> Schuenemann, sudo /etc/init.d/apache2 stop
[19:26] <blackjak> guys I need gtk+-2.0  However there are so many packets with similar name in the Synaptics.Which should I choose?
[19:26] <arvind_khadri> hi what was the bug reporting tool that had made its way into Ubuntu...
[19:26] <G-Bleezy> thank you ocean
[19:27] <Titan8990> cell, what kind of program images?
[19:27] <job> Thanks oCean__
[19:27] <carandraug> Dat1: there's a command to delete users. It's called userdel. Run "userdel user_login"
[19:27] <Schuenemann> Titan8990,  I still see the default page at localhost
[19:27] <Titan8990> Schuenemann, ps aux | grep apache
[19:27] <Dat1> ﻿carandraug: thanks I'll try it
[19:27] <Titan8990> Schuenemann, kill the PID of the apache proccesses
[19:27] <jrib> blackjak: you already have it
[19:28] <thechris> when attempting to reboot, i get garbled text and the computer seems to hang
[19:28] <thechris> flashing garbled text
[19:29] <job> bigbrova> I can't find the file 'apt.conf' in  /etc/apt/
[19:29] <qcjn> hi, i ve installed a puppy in /puppy410 and made the changes in grub. It worked, but when i got out, saved the files to hda3 and now my mouse won<t work anymore under ubuntu
[19:29] <Elda> Weeee my laptop is now set up using Win7/Ubuntu dualboot
[19:29] <arvind_khadri> job, its sources.list i guess you are talking about
[19:29] <Schuenemann> Titan8990,  it worked this time. Can you tell me which directory it reads files from?
[19:29] <cell> Titan8990, may be language pakage or especially english dictionary program. because i use limited internet.
[19:29] <qcjn> so i ve erase everything in /puppy410 but it desn t do the trick
[19:30] <darthanubis> whats the current stable kernel for ubuntu? Are we -12 yet or still -11?
[19:30] <Titan8990> Schuenemann, the default configdir is: /etc/apache2
[19:31] <Schuenemann> Titan8990,  I put a html file in /usr/share/apache2/default-site/ but I get a 404 error
[19:31] <job> arvind_khadri> I have this error "Error parsing proxy URL http://:8080/: Invalid host name.andale32.exe: No such file or directory"
[19:31] <Titan8990> Schuenemann, each vhost file will define the it's own rootdir for serving files
[19:31] <Elda> I am curious though, how come in setting my laptop up when I tried to define the partitions, how come it would not allow me to alter the partition with Win 7 installed? In that the first time I tried installing I tried to use the option where it shrunk the win 7 partition, and just dedicated the rest to linux.  Instead I had to format my entire partition and then go back and divide it into Windows 7, Ubuntu, and swap by hand
[19:31] <IntuitiveNipple> job: try a search for the bad entry using: grep -n '8080' /etc/apt/*
[19:31] <G-Bleezy> does anyone know if this motherboard should work with Ubuntu:  ASRock A780G
[19:31] <Elda> Okay Im thinking that got cut off... at what point did it?
[19:31] <Titan8990> Schuenemann, by default, its always somewhere in /var/www
[19:31] <LostChain> can anyone help me install xmms
[19:31] <bigbrovar> job> now check /settings/preference/network in synaptic and set it to direct internet
[19:32] <anxiolytic> Is it possible to stop Rhythmbox from indexing? Right now it's working fine but it's indexing my entire hard drive. Very annoying.. I want to cancel/stop it and just select specific folders
[19:32] <arvind_khadri> job, googled about it?
[19:32] <cell> hhere iis so complex :S
[19:32] <job> bigbrova> I did that. I did google it too. No good.
[19:32] <Schuenemann> Titan8990,  ahh, there it is. There is the same html in that dir, that confused me
[19:32] <Schuenemann> Titan8990,  thanks
[19:32] <Titan8990> Schuenemann, you really should do some research on apache and consider joining the apache channel
[19:32] <Titan8990> Schuenemann, np
[19:33] <LostChain> no matter what program i install on ubuntu i get stop errors when i do a make
[19:33] <Schuenemann> Titan8990,  yeah, I've used tomcat, but never apache alone
[19:33] <w00w> video problem with flash content any solution?
[19:33] <job> bigbrova> Please tell me first how to talk to you guys one by one. Say.. How to talk to just one of you at a time..
[19:33] <CRASH69> how can I have mumble 1.1.7 on ubuntu 8.04?
[19:33] <blackjak> Guys how do I do that ? No package 'gtk+-2.0' found
[19:33] <blackjak> > Please install (or upgrade to) GTK+ 2.6.0, at least.
[19:33] <job> bigbrova> I don't know even how to do that :p
[19:33] <LostChain> i got that error too
[19:33] <LostChain> you need glib too
[19:34] <LostChain> and then glib tells you that you need gettext
[19:34] <bigbrovar> did check /settings/preference/network in synaptic and set it to direct internet under synaptic
[19:34] <LostChain> and then gettext says it cant install
[19:34] <paganini> Hey all, I've encountered a really weird shell-script problem involving $PPID. Something has broken since an upgrade in the last few eeks, and I can't figure out what it is.
[19:34] <jrib> blackjak: tell us what you are compiling
[19:34] <paganini> Someone give me a PM if you'
[19:34] <paganini> re interested
[19:34] <LostChain> its an endless cycle
[19:34] <sam_> Does anybody knows is the ubuntu 9.04 version seems stable at the time ?
[19:34] <jrib> LostChain: why are you using make to install things...?
[19:35] <Elda> sam_, probably not
[19:35] <redvamp128> CRASH69:  There appears to be a package of mumble I found it on packages- so it should be in synaptic package manger - I did find this link Ubuntu -- Package Search Results -- mumble <http://packages.ubuntu.com/search?keywords=mumble&amp;searchon=names&amp;suite=all&amp;section=all>
[19:35] <sam_> Elda, okay =s
[19:35] <LostChain> well thats what the install document says
[19:35] <Myrtti> !jaunty | sam_
[19:35] <letalis> sam_: its rare an os in beta is stable enough for main system use
[19:35] <LostChain> ./configure
[19:35] <LostChain> then make
[19:35] <LostChain> then make install
[19:35] <darthanubis> sam_, you'll get the same reply until it no longer beta
[19:35] <gartral> ok, ive picked up gg1234's problem, but the partioner doesnt recognise his second drive
[19:35] <FloodBot2> LostChain: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[19:35] <jrib> LostChain: why are you not using the repositories?
[19:35] <wolter> hi
[19:35] <wolter> how can i see which is the latest nvidia driver?
[19:35] <ndo> Hi guys. Euhm, a little question here.. Any advises on which editor to use to edit VBScript? ;)
[19:35] <wolter> i need 180.29 ..
[19:35] <LostChain> i dunno...what is that
[19:36] <job> IntuitiveNipple> I got this message after "grep -n '8080' /etc/apt/*" [19:36] <wolter> !who | LostChain
[19:36] <LostChain> ok
[19:36] <jrib> LostChain: in general, you never download and compile things to install them on ubuntu.  You use the APT to install software from the repositories.  Some frontends for APT are Add/Remove and Administration -> Synaptic in your menus
[19:37] <paganini> Man when did ubottu get to be such a self absorbed jackass? Its talking almost as much as everyone else put together!
[19:37] <paganini> It's, that is
[19:37] <tiger3723> allo
[19:37] <ScottG489> Whenever i try to increase the size of my movie it just increases the windows size not the actual picture. Im using mplayer.
[19:37] <arvind_khadri> !ohmy | paganini
[19:37] <ScottG489> Help?
[19:37] <LostChain> jrib: ok i will try that, but i am unsure how to do that
[19:37] <jrib> !synaptic | LostChain
[19:37] <Myrtti> paganini: it's a bot.
[19:37] <paganini> I know Myrtti
[19:38] <redvamp128> CRASH69:  did you get my link or is it lost in the messages? Ubuntu -- Package Search Results -- mumble <http://packages.ubuntu.com/search?keywords=mumble&amp;searchon=names&amp;suite=all&amp;section=all>
[19:38] <paganini> it's just talking a lot more than it used to
[19:38] <jrib> LostChain: it should be a very very very rare thing for you to need to compile anything on ubuntu
[19:38]  * paganini hasn't been in for a while
[19:38] <paganini> cos everything has been running smoothly :)
[19:38] <ndo> So, noone here is familiar with VBScript? :)
[19:38] <letalis> paganini: honestly this is one of the more freindly linux communities that i have seen.
[19:39] <letalis> *friendly
[19:39] <job> IntuitiveNipple>I tried grep -n '8080' /etc/apt/* but still got no news..
[19:39] <vigo> ndo: I know a little Basic, and played with VB stuff for a while
[19:39] <gajop> i've got a script i want to be run at startup, (like other daemons), how do I do that?
[19:39] <Cassetti> Hello everyone!
[19:39] <mobo> Can someone in here help a linux noob out with a networking problem?
[19:39] <letalis> i Cassetti
[19:39] <gajop> it doesn't seem bum detects it, even though it's in /etc/init.d/
[19:39] <letalis> hi
[19:40] <paganini> latelis, I've been in the community since 5.04, so I'm familiar with the friendliness. Like I said, just noticing that the bot is... more talkative
[19:40] <LostChain> i am confused with this synaptic pakage manager
[19:40] <LostChain> how do i use it
[19:40] <ndo> vigo: Hi man, any advise on which editor would be good for it?
[19:40] <gajop> LostChain: what do you want to do with it?
[19:40] <LostChain> install xmms
[19:40] <bigbrovar> job> try asking .. seems to me you are behind a network proxy
[19:41] <Cassetti> Anyone able to offer some help with getting permissions to access my home directory on my ubuntu 7.04 from this live-cd intrepid ibex?
[19:41] <letalis> LostChain: goto a terminal ad type: sudo apt-get install xmms
[19:41] <Cassetti> I need to copy my home directory to a thumb drive, want to do a clean install of intrepid ibex
[19:41] <letalis> that would actually be aster
[19:41] <letalis> faster
[19:41] <vigo> ndo: I like gEdit, but for that stuff I use Notepad+
[19:41] <LostChain> Cassetti: have you tried logging on as root
[19:41] <njs_> My screen resolution won't go above 800x600, but I've seen in do 1280x1024 elsewhere. Anybody have any ideas?
[19:41] <CRASH69> redvamp128: the 8.04 hardy repository (even backports) only have 1.1.3, and when I enable the jaunty repository I get this http://pastebin.com/m64794afe
[19:41] <Cassetti> I'm running a live cd
[19:41] <jrib> LostChain: did you read the link ubottu  gave you?
[19:41] <bigbrovar> job> that problem usually comes up when wget tries to download msfonts through post 80 which as been blocked by a proxy server
[19:41] <Led_Zeppelin> Trying to install kde4 for Ubuntu 7.10 (gutsy). When I login to Kde4 session, I get a blank screen. Any ideas how I can fix this?
[19:41] <Cassetti> i don't know how to
[19:42] <alwayssleepy> sorry to reask how do you disable system sound in linux, it makes a loud beep everytime i shutdonw
[19:42] <paganini> anyway, anyone have any idea why echo $PPID > /var/run/appname.pid in a bash shellscript stores the wrong PPID?
[19:42] <job> bigbrovar> Possibly. But last time I connect to the internet in this room there was nothing like this..
[19:42] <alwayssleepy> and it scares me
[19:42] <bigbrovar> job> i mean port 80 not post 80
[19:42] <mun> hi
[19:42] <vigo> ndo? Notetab is a free and open source editor, text, java, VB, HTML and more
[19:42] <alwayssleepy> mun hi
[19:42] <job> bigbrovar> Yes. It said something about msfonts too.
[19:42] <mun> in shell script, how do i check if a directory, e.g., /foo exists in an if statement?
[19:42] <Cassetti> Anyone able to help or is there another channel for that
[19:42] <gajop> LostChain: you should just go to the synaptic manager, it will ask you for sudo password, give it, then just type xmms2 and install it
[19:43] <LostChain> letalis: E: Could not get lock /var/lib/dpkg/lock - open (11 Resource temporarily unavailable)
[19:43] <LostChain> E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
[19:43] <bigbrovar> job> where are u browsing from a school or at home
[19:43] <Cassetti> Lost chain - are you running an update?
[19:43] <njs_> My screen res won't go above 800x600
[19:43] <gajop> LostChain: close synaptic package manager if you're installing it from terminal
[19:43] <LostChain> no
[19:43] <ndo> vigo: okay, ty, just was looking for something that would show correct highlighting :) ill try this one
[19:43] <rdw200169> mun, in the bash man page, they list all the tests you can do... the tests include things like if a file exists, etc...
[19:43] <gajop> LostChain: only one package-related application can be opet at any one time
[19:43] <letalis> LostChain: probably because synaptic is still open
[19:43] <job> bigbrovar> I have never had this problem before until I tried to get videos played in youtube and I tried to solve problems concerning Flash player plugins
[19:43] <Led_Zeppelin> mun: test -f /foo
[19:44] <thechris> so, anyone able to reboot their computer?
[19:44] <vigo> nod: here is the URL ,http://www.notetab.com/...it is buy Fookes and works great
[19:44] <letalis> LostChain: you cant use apt-get while another package manager is running
[19:44] <LostChain> yup that was it
[19:44] <mun> thanks
[19:44] <redvamp128> CRASH69:  I did find 1.1.5 for hardy though I don't know how you can get 1.1.6 at getdeb.net Application Information - Mumble <http://www.getdeb.net/app/Mumble>
[19:44] <LostChain> sybaptic was open
[19:44] <mobo> Got an odd problem here... connected to my school's wireless network a while back, named wireless.txstate.edu. I am back at home now on my wireless network, and I am trying to communicate with another box on the same network. I can obviously get online, but I seem to have some intranet networking errors...when I try to ping my second client (mythbox) I get this "mobo@entropy:~$ ping mythbox
[19:44] <mobo> PING mythbox.wireless.txstate.edu (208.69.36.132) 56(84) bytes of data.
[19:44] <mobo> 64 bytes from hit-nxdomain.opendns.com (208.69.36.132): icmp_seq=1 ttl=55 time=52.4 ms" ....so it looks like my PC (entropy) is tryiing to lookup the hostname mythbox using my router, using opendns, but I see the txstate wireless stuff in there, and I'm unsure why it is even appearing
[19:44] <FloodBot2> mobo: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[19:44] <elementz> could somebody pls help me compiling this: http://www.hitl.washington.edu/artoolkit/documentation/usersetup.htm#comp_linux?
[19:44] <elementz> i get the following error message when running make http://pastebin.com/f4a54fc69
[19:45] <vigo> ndo: That one is highly configurable
[19:45] <elementz> sry, i messed up the first link:  http://www.hitl.washington.edu/artoolkit/documentation/usersetup.htm#comp_linux
[19:45] <bigbrovar> job> i get it too when am tryign to install flash plugins or msfonts .. but am behind a proxy server .. that is why am suggesting that u could be behind a proxy server without knowing it
[19:45] <redvamp128> CRASH69:  you should be able to get the .deb from getdeb for 1.1.5 of mumble but I don't know how you would get the 1.1.6- here is the link for 1.1.5 Application Information - Mumble <http://www.getdeb.net/app/Mumble>
[19:46] <CRASH69> redvamp128: 1.1.5 should be enough, but is ok to install from there?
[19:46] <job> bigbrovar> I get your point. What's puzzling is that I always connect to the internet from this place and there has never been this problem before until today.
[19:46] <letalis> elementz: looks like the linkage.h file is missing from linux/
[19:47] <ndo> vigo: normally for scripting on win i use notepad++, but for some reason i dont liked it for VBScript, and i was searching for something pretty simple. Something that is used exactly for VBScripting.:)
[19:47] <vigo> Why do websites know that I am in Destin Florida and how can or do I change that , it is annoying.
[19:47] <elementz> letalis: ok, so where could i find that? any ideas?
[19:47] <redvamp128> CRASH69:  I have installed a few here and there from getdeb with no issues mostly games though that are not in the repositories.
[19:47] <LostChain> i got this error when installing xmms
[19:47] <LostChain> Package xmms is not available, but is referred to by another package.
[19:47] <LostChain> This may mean that the package is missing, has been obsoleted, or
[19:47] <LostChain> is only available from another source
[19:47] <LostChain> E: Package xmms has no installation candidate
[19:47] <FloodBot2> LostChain: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[19:47] <letalis> elementz: gime a sec
[19:47] <job> bigbrovar> I've just installed the XCHAT too. And installing XCHAT gave me that very same error message.
[19:47] <elementz> letalis: k
[19:47] <bigbrovar> job> do u install flash program everyday
[19:47] <ardchoille> LostChain: try audacious, it looks like xmms and uses xmms skins
[19:47] <nite_johnboy> I just installed iTunes 8 with Wine  but can not find icon to start app - any idea's ? ?
[19:47] <job> bigbrovar> No.. :p
[19:47] <vigo> ndo: oh ok,,look at FSF directory
[19:47] <LostChain> ok
[19:47] <quibbler> LostChain: the package is xmms2
[19:48] <letalis> letalis: let me see if i have that header file on my system though even if i find one of that name it may not be the one its looking for you may want to read the documentation or talk to the people on their forums relating to that
[19:48] <bigbrovar> job> then u are behind a proxy .. i use xchat too and it wont connect till i set my proxy parameters
[19:48] <ardchoille> I loved xmms but didn't like xmms2
[19:48] <CRASH69> great redvamp128I will give it a try
[19:48] <nite_johnboy> Looked in Wine folder already and can not find icon in there either.
[19:48] <letalis> elementz: i found it in the linux source headers
[19:48] <ndo> vigo: okay, ty:)
[19:48] <letalis> is that linux folder its pointing to a symlink?
[19:49] <job> bigbrovar> hmm.. I don't get much of what you told me.. But thanks a lot anyway. :) I'm quite a newbie.
[19:49] <Led_Zeppelin> Trying to install kde4 for Ubuntu 7.10 (gutsy). When I login to Kde4 session, I get a blank screen. Any ideas how I can fix this?
[19:49] <bigbrovar> job> some programs like firefox have automatic proxy config so there can work behind proxy
[19:49] <vigo> ndo: I am happy if I helped.
[19:49] <nite_johnboy> Is there a good alternative linux app to use with an ipod or iTouch player ? ?
[19:49] <ardchoille> Led_Zeppelin: ask in #kubuntu
[19:49] <Led_Zeppelin> #kubuntu
[19:50] <Auctionedllama> Does anyone know how to a get a SIID Soundwave 7/1 card working on 8.10?
[19:50] <s0u][ight> hello i can't umount /proc in a chrooted envoirenment
[19:50] <ndo> vigo: im happy that you responded, and ill directly see if you really helped. :)
[19:52] <Auctionedllama> Anyopne?
[19:52] <Auctionedllama> *Anyone know any sound drivers for SIIG cards?
[19:52] <ardchoille> Auctionedllama: have you checked the HCL?
[19:52] <ardchoille> !hcl | Auctionedllama
[19:53] <job> bigbrovar>I'll try to reboot and see if the error still persists..
[19:53] <Redragon> I am trying to install wwmkr from http://www.wwmkr.com . I installed the gambas2 package usint SPM. After using the  sudo dpkg -i command, I have this: Unpacking wwmkr-qt (from wwmkr-qt_1.0.37-1_all.deb) ...
[19:53] <Redragon> Setting up wwmkr-qt (1.0.37-1) ...
[19:53] <Redragon> mdonahue@mdonahue-desktop:~/Desktop$
[19:53] <FloodBot2> Redragon: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[19:53] <bigbrovar> job> try u never know
[19:53] <vigo> ndo: here is the FSF lists page: http://directory.fsf.org/ ,
[19:54] <gosia> Yol
[19:54] <gosia> LD
[19:54] <gosia> faza co nie
[19:54] <Auctionedllama> ardchoille, so if it's not on the list, it won't work?
[19:55] <ardchoille> Auctionedllama: No, if it's not on the list it means that no one has gotten it to work or proved it won't work yet. You could be the first to post for that card if you find a fix
[19:55] <CRASH69> redvamp128: thx alot dude, it installed flawlessly, and now I have positional audio option, hope it work, see you and ths again
[19:56] <gg1234> hey guys
[19:56] <Out_Cold> anyone familiar with spread sheet formulae that i could PM about?
[19:57] <LostChain> i installed audacious but i am not getting playback
[19:58] <sirhc_> how do you turn off " joined / quit " messages in Xchat?
[19:58] <jrib> LostChain: make sure pulse audio is set as your sound output
[19:58] <LostChain> i have tried to change the sound output but nothing
[19:58] <LostChain> how do i do that
[19:58] <LostChain> nevermid
[19:58] <LostChain> it is
[19:58] <LostChain> still nothing
[19:58] <daredevilthere> Hey all I recomiled kernel>does renaming kernel causes problem
[19:59] <quibbler> sirhc_: right click the ubuntu tab unckeck join/part
[19:59] <Auctionedllama> could I run the windows driver through WINE?
[19:59] <dayo> !sound | LostChain
[19:59] <LostChain> jrib: when i hit play it just starts the count down of the song, but no sound and it doesnt count down
[20:00] <jrib> LostChain: did you try what I said?
[20:00] <wolter> is jaunty somewhat stable yet?
[20:00] <LostChain> ubottu: sound is working fine
[20:00] <jrib> wolter: jaunty is in development.  Discussion in #ubuntu+1
[20:00] <LostChain> jrib: yes i tried that
[20:00] <dayo> !ubottu | LostChain
[20:00] <wolter> well, stable it should be, but I mean, somewhat complete?
[20:00] <sirhc_> quibbler : thank you
[20:00] <tsrk> what should I use to delete a user, userdel or deluser?
[20:01] <quibbler> sirhc_: np
[20:01] <jrib> LostChain: close everything else using sound
[20:01] <jrib> LostChain: including firefox
[20:01] <LostChain> jrib: i did that...should i reboot
[20:01] <sirhc_> does anyone have any lirc experience and want to help a newb?
[20:02] <jrib> LostChain: sure, see if that makes a difference
[20:02] <anxiolytic> Is it possible to stop Rhythmbox from indexing? Right now it's working fine but it's indexing my entire hard drive. Very annoying.. I want to cancel/stop it and just select specific folders
[20:02] <LostChain> ok
[20:02] <judget_> Hi everyone New Ubuntu just installed here
[20:02] <NFischer> is there a possibility to boot without wifi drivers? interpid is giving me a kernel anic and i think the villain is my wifi card..
[20:02] <anxiolytic> judget_: cool
[20:03] <aitd> tsrk: userdel will not remove the home dir for the user unless the -R option is used
[20:03] <redvamp128> NFischer:  have you tried booting with a different kernel or safe mode using grub
[20:04] <judget_> THanks for the welcome
[20:04] <tsrk> aitd, it looks to me that neither will deluser
[20:04] <NFischer> redvamp128 its a live session.. dont have grub
[20:04] <sirhc_> hi judget
[20:04] <root__> dayo: fucked up nigga that is what you are .. please leave this forum
[20:04] <sauvin> Trying to build a chroot, getting this error running apt-get install sudo: "dpkg: syntax error: unknown group `Debian-exim' in statoverride file". What this means, please?
[20:04] <HLM11> need help with my sound not working.. im using a sound blaster mp3+ external usb drive
[20:04] <paganini> OK, so, I have a script in /etc/init.d that sits in the background and loops. In order to kill this process on shutdown I have it echo $PPID /var/run/appname.pid. I have a different script called at shutdown that kill -9 `cat /var/run/apppname.pid`
[20:05] <paganini> The problem is that the stored PPID is WRONG
[20:05] <jrib> !language | root__
[20:05] <judget_> Hi sirhc Not My first Ubuntu system Trying to entice my wife to use this instead of You-Know-What
[20:05] <Redragon> I am trying to install wwmkr. Terminal is currently showing:
[20:05] <LostChain> jrib: still doesnt play
[20:05] <dayo> jrib: thank you
[20:05] <alucardromero> HLM11: Check the sounds settings and see if sound is in digital mode or not.
[20:05] <jrib> LostChain: what sound output is selected now?
[20:05] <paganini> TThis script has been working well for a while; the PPID mismatch has started up suddenly
[20:05] <paganini> in the last week or so
[20:05] <jrib> LostChain: in audacious preferences
[20:05] <aitd> tsrk: deluser -remove-home will do the trick, you can also backup the dir first before the user is removed
[20:05] <judget_> gotta run4 now  byeee
[20:06] <LostChain> jrib: pulseaudio
[20:06] <Redragon> Unpacking wwmkr-qt (from wwmkr-qt_1.0.37-1_all.deb) ... Setting up wwmkr-qt (1.0.37-1) ...  mdonahue@mdonahue-desktop:~/Desktop$
[20:06] <HLM11> im new to ubuntu, how do I do that, but my soundcard is set for digital and analog
[20:06] <aitd> tsrk userdel, i believe is more of a low level util
[20:06] <jrib> LostChain: don't know then
[20:06] <redvamp128> NFischer:  With the live cd there is not much you can do-- other than control-alt-backspace then alt-f2 and kill the process (though you have to know the driver) with an install you can do more. Unless you want to ask again and someone else may be able to help you.
[20:06] <tsrk> aitd, ok, I tried deluser and it worked fine
[20:06] <LostChain> its cool i just dont like the player that comes with ubuntu 8
[20:06] <aitd> tsrk good deal
[20:06] <Redragon> The installation never seems to occur.
[20:06] <tsrk> i figured since i used adduser to add it i should use deluser to delete it
[20:07] <tsrk> i just didn't understand why there were 2 separate ones
[20:07] <alucardromero> HLM11: In the upper right, right click on the volume icon, and click on "Open Volume Control".
[20:07] <nickrud> Redragon, what you pasted is the complete setup
[20:07] <NFischer> redvamp128 the problem is when i install it the same problem happens.. i dont want to give iup my working hardy for trying
[20:07] <Kutz> I am having some problems. I used Wubi to install Ubuntu. I get the Ubuntu login screen and enter my username and password and then it just gives me a blank screen with a cursor.
[20:07] <root__> dayo> how do u even live with your self .. am sure u dont look at the mirror
[20:07] <LostChain> jrib the one that comes with ubutnu 8 works fine, i just hate the playlist editor
[20:07] <aitd> I prefer the adduser as well useradd has an option for passwords but on my system(s) the password ends up in the passwd file as plain text instead of in shadow
[20:07] <LostChain> and the plugins suck
[20:07] <Redragon> So the program is currently installed?
[20:07] <darthanubis> compiz fails to autostart at login
[20:07] <HLM11> its open, but its not telling me anything about digital..
[20:08] <NFischer> redvamp128 but thx ill try the ctrl+alt backspace thing
[20:08] <alucardromero> Hmm.
[20:08] <quibbler> root__: give it a rest
[20:08] <aitd> tsrk useradd works better for me in other situations though. So I end up using them both from time to time.
[20:08] <Kutz> Anyone have any ideas?
[20:09] <tsrk> aitd, what situations?  what do they do differently?
[20:09] <elementz> does anybody know how to compile/install via CMake?
[20:09] <elementz> i am trying to install the following http://artoolkit.svn.sourceforge.net/viewvc/artoolkit/branches/hartmut-pre-2_8/artoolkit/
[20:10] <HLM11> I am getting no sound..
[20:10] <LostChain> jrib: know anything about installing mplayer for ubuntu
[20:10] <G-Bleezy> where is Xorg.conf located???
[20:10] <jrib> LostChain: same way you installed audacious
[20:10] <jrib> G-Bleezy: /etc/X11/xorg.conf
[20:10] <G-Bleezy> k
[20:11] <aitd> tsrk: useradd when I just need to add a user to a server / group for file access. The group has a password for access. adduser when I need to have a home dir and password installed on the system, such as a desktop
[20:11] <Kutz> I put Ubuntu on it's own partition also. I get the ubuntu login screen and log in fine, it just gives me a tan screen with a cursor. Nothing else happens.
[20:11] <LostChain> apt .... i forgot the rest
[20:11] <jrib> elementz: synaptic
[20:11] <jrib> LostChain: use synaptic
[20:11] <LostChain> ok
[20:11]  * jrib sees a pattern
[20:12] <Owner> does anyone know the solution to ubuntu failling to get  files from mirrors on first installintionn it keeps giving the sme message no matr what mirror I choose
[20:12] <aitd> tsrk: also tend to use gpasswd to manage the groups and group passwords
[20:12] <failers^> what should i chmod my home/user/.gnupg/gpg.conf to since it warns about wrong permission
[20:12] <tsrk> aitd, oh, ok, i think i understand, i didn't even know groups could have passwords
[20:12] <hatten> bye folks, I'll go play some OpeniLeroXtreme
[20:12] <hatten> *openlieroxtreme
[20:12] <jrib> failers^: mine is 600
[20:13] <failers^> jrib ok thx
[20:13] <redvamp128> Kutz:  you could try reinstall ubuntu-desktop or install the kubuntu-desktop sign into that go into your package manger and tell it to reinstall ubuntu desktop
[20:13] <aitd> tsrk: yup. Even so, I have set up groups and then added the sticky bit to the dir, then added the users to the group with no password, but let them have full control of the dirs and files they add individually.
[20:13] <Owner> no the laptop has no oratiin os on it at the moment
[20:14] <tsrk> aitd, the sticky bit?  what's that?
[20:14] <aitd> tsrk: this way they can add files for group access, but cannot delete any of them without owning them first. .. Also set the umask to 0027 before doing this to make the job easier
[20:14] <c0rrupt0r> i need some help please
[20:14] <sauvin> Can anybody point me to a good guide for getting a chroot going under inprepid ibex?
[20:15] <Owner> does anyone know the solution to ubuntu failling to get  files from mirrors on first installintionn it keeps giving the same message no matr what mirror I choose
[20:15] <c0rrupt0r> when i open up update manager i see updates in there but the update button is grayed out and wont let me click it
[20:15] <elementz> jrib: synaptic? for what?
[20:15] <jrib> elementz: the answer to your question
[20:15] <sauvin> Owner, what error?
[20:15] <tsrk> aitd, ah, ok, i've been wondering if there's a way to do that
[20:15] <redvamp128> Kutz:  you could try alt+f1 to get a prompt up to do the reinstall or install
[20:15] <Necrogamemaster> Excuse me I'm having a problem where my wireless works but the light is not on
[20:15] <Necrogamemaster> Strange isn't it?
[20:16] <diginux> Necrogamemaster: if it works, don't worry about it :)
[20:16] <tabidachi_> Necrogamemaster, do you need help with it?
[20:16] <jrib> elementz: install cmake using synaptic, then read the documentation for your software
[20:16] <Owner> something about bad mirrors or no rlease file
[20:16] <elementz> jrib: ah got it
[20:16] <aitd> tsrk: Sticky bit: when assigned to the dir allows users to only delete the files within the dir for which they are owner of the file or the dir itself.
[20:16] <elementz> th
[20:16] <elementz> thx
[20:16] <Necrogamemaster> Just wondering if it could become a problem later, maybe it just burned out, lol
[20:16] <tsrk> aitd, ok, thanks
[20:16] <tabidachi_> I'd leave alone Necrogamemaster
[20:16] <aitd> tsrk: for instance chmod 1770 <dirname>
[20:16] <diginux> Necrogamemaster: mine doesnt come on either, it is probably an issue of the driver just not turning the light on
[20:17] <tsrk> aitd, the 1 in front means the sticky bit?
[20:17] <shiraj_> hey guys
[20:17] <fiftyone_> hello i have a question, when i type on my laptop my text goes crazy because of my hand is brushing the trackpad, anyone have this problem, if so how do you solve it?
[20:17] <Owner> i googled it and it seems I am not theonly onewho hasseen this
[20:17] <fiftyone_> makes it damn near impossible to type nicely
[20:17] <aitd> tsrk: yes. Then as root chgrp for the group
[20:17] <tsrk> ok
[20:17] <aitd> tsrk: add the users to the group and you are done
[20:17] <shiraj_> anyone have experience being connected to 2 different wireless nets at the same time?
[20:18] <EQUIV> Hello, how do I protect my server agaings UDP flooding?
[20:18] <G-Bleezy> wqhere can i find my Xsession config file?
[20:18] <Owner> something about bad mirrors or no rlease files
[20:18] <maxime_> hey guys
[20:18] <maxime_> i have a Q concerning virtual machine
[20:18] <foolz> this is kind of a random question, but does anyone have any suggestions on what is a good font combination to set in System / Preferences / Appearances / Fonts?  it seems that no matter what font I choose, they are all kind of ugly... I could also use a font suggestion for my Bluefish editor, that was reset when I last updated for some reason
[20:18] <Necrogamemaster> One more question what desktop enviroment is less demanding KDE, Gnome, or XFCE???
[20:18] <Owner> I doing a net install
[20:18] <redvamp128> fiftyone: I did find this about temporarily disable the touchpad- Temporarily Disable Touchpad While Typing : Ubuntu Tutorials : Dapper - Gutsy - Hardy - Intrepid <http://ubuntu-tutorials.com/2007/05/06/temporarily-disable-touchpad-while-typing/>
[20:19] <Kutz> So does anyone know how to fix that problem?
[20:19] <napsy> I have a problem. I have an encrypted /home partition, entrypted during installation, now reinstalled my system and don't know how to restore the /home encrypted partition. The installer didn't recognised it. Please help.
[20:20] <tangentcollision> Necrogamemaster: fluxbox
[20:20] <redvamp128> Kutz:  you could try reinstalling ubuntu-desktop  or install the xubuntu-desktop- log off and sign into that to gain access to the Synaptic Package Manger to do a reinstall of Ubuntu-desktop.
[20:21] <Kutz> redvamp128, All I did was run wubi.
[20:21] <Kutz> Did I do something wrong?
[20:21] <foolz> Necro, I am not an expert but I think XFCE is the least demanding of those three
[20:21] <anxiolytic> Is it possible to stop Rhythmbox from indexing? Right now it's working fine but it's indexing my entire hard drive. Very annoying.. I want to cancel/stop it and just select specific folders  ????
[20:21] <Kutz> redvamp128, I can log in I just can't do anything.
[20:22] <nootrope> i downloaded and unpacked an app whose bianry is only available for Linux within a .tar.gz archive. I unarchived it inside ~/opt/. How do I make the binary executable either by double clicking on it or--better yet--adding it to a desktop panel. Currently, I get a warning, when I double-click the binary from Nautilus, that asks what I want to do with the file.
[20:22] <redvamp128> Kutz:  I think something went odd in the install of the ubuntu-desktop (gnome) but no you didn't do anything wrong.
[20:22] <anxiolytic> I figured it out.. close and reopen the app
[20:22] <Kutz> redvamp128, How would I reinstall ubuntu-desktop?
[20:22] <redvamp128> Kutz:  try first alt-f1 should bring up a terminal
[20:23] <Dat1> Just a note on my problem I though I was having before about not being able to delete a suspicious user.  The user was created by transmission torrent afaict.  And not being able to administrate Users and Groups is a bug with the GUI, it works perfectly over the command line.  http://ubuntuforums.org/showthread.php?t=885096  You guys will have to remember that one.  :D
[20:23] <EQUIV> Kutz, try alt + F2
[20:24] <c0rrupt0r> i have a problem with updates, when i open up update manager i see updates in there but the update button is grayed out and wont let me click it
[20:24] <c0rrupt0r> ubuntu 8.04
[20:24] <Kutz> Ok
[20:24] <tangentcollision> Kutz: ctrl+alt+backspace then apt-get remove ubuntu-desktop then apt-get install ubuntu-desktop
[20:24] <Kutz> I am going to restart the pc and run it into ubuntu
[20:25] <Kutz> So I want to login right?
[20:25] <tangentcollision> actually
[20:25] <gartral> it IS safe to resize from the beginning of a NTFS partition->back to create free space in the front of the drive, right?
[20:25] <redvamp128> tangentcollision:  thanks I was just getting ready to type that- but got a private message from someone else
[20:25] <aitd> tsrk: further on the useradd. typically I use it in scripts to bulk add users to the system
[20:25] <tangentcollision> sudo apt-get install irssi first, then use ctrl+alt+F2 screen irssi to keep a signal to us during the fray
[20:26] <Owner> does anyone know a floppy install process or files for ubuntu  that really works for sure
[20:26] <wolter> Hi, I enabled the jaunty restricted repo under intrepid to install the latest nvidia drivers, and now I have them installed. How do I remove all the other jaunty updates?
[20:26] <tsrk> aitd, ok, i usually don't have to do anything like that
[20:26] <LostChain> anyone have an idea why my video playback flickers alot
[20:26] <aitd> tsrk: also using a util called chpasswd(?) to force encrypted passwords to shadow and then expire them so that they will have to change the pw on the first login.
[20:26] <tangentcollision> Kutz: you get all that?
[20:26] <Owner> mos of the poceses I am running into are iether brken or buggy
[20:26] <anise> hello to all,can anyone tell me how can i make swf flash photos slideshow in ubuntu 8.10
[20:26] <ardchoille> wolter: it's a very bad idea to mix repos like that
[20:26] <Kutz> Yea, logging in right now
[20:26] <tangentcollision> hmm
[20:27] <c0rrupt0r> i have a problem with updates, when i open up update manager i see updates in there but the update button is grayed out and wont let me click it
[20:27] <aitd> tsrk: np. Useful info for future use maybe
[20:27] <tangentcollision> so you're not on the computer
[20:27] <tsrk> aitd, ah, that one could be useful (chpasswd), thanks
[20:27] <tangentcollision> Kutz: don't worry about logging in
[20:27] <durt> wolter: the latest drivers are in 8.10 are they not (180.29)?
[20:27] <wolter> ardchoille, its even a worse idea to not do it being a consequence of such not being able to suspend one's computer between classes
[20:27] <Kutz> i log in, when I hit ctrl+alt+backspace it logs me out
[20:27] <LostChain> my 2 gigabyte jump drive gives me an error saying cannot mount
[20:27] <tangentcollision> you're going to be logging in to command line
[20:27] <wolter> durt, no, but 180.11 or 22,,
[20:28] <anise> hello to all,can anyone tell me how can i make swf flash photos slideshow in ubuntu 8.10
[20:28] <aitd> tsrk: I had a full example uploaded to my website at one point but pulled it for updating. Otherwise I could show you the script and the differences easier.
[20:28] <ardchoille> wolter: mixing repos can destroy the system, there is no valid reason for it.
[20:28] <sauvin> Owner, I asked because I thought *maybe* I could help. I'm actually kinda busy right now trying to get my girlfriend's computer running. Please STOP hammering me.
[20:28] <tangentcollision> Kutz: you're going to be doing all of this in command line
[20:28] <EQUIV> Kutz, try ctrl alt F1 and then log in from there
[20:28] <aitd> tsrk: It will end up there again before long....
[20:28] <quibbler> c0rrupt0r: try sudo apt-get update in the terminal and see what if any errors occur
[20:28] <Kutz> ok I logged in with session GNOME
[20:29] <titan_ark> hey :) am a n00b, need some help. how do i update a software? i want to update Transmission torrent client
[20:29] <tangentcollision> Kutz: no, stop right there
[20:29] <Kutz> I have a desktop image but can't do anything
[20:29] <wolter> ardchoille, that's why I just installed the nvidia drivers, obviously having previously consulted if that wouldn't harm my system.
[20:29] <Renfield> How do I configure my network settings in Ubuntu 8.10, and have them stick around?
[20:29] <tsrk> aitd, how soon do you think?
[20:29] <c0rrupt0r> quibbler: ok thank you will try that
[20:29] <Renfield> When I reboot, it says the network is not connected, and when I go to the network settings, they are blank again.
[20:29] <tangentcollision> Kutz: log in via command line, that's why I had you ctrl+alt+bkspc
[20:29] <aitd> tsrk: within the month http://projects.cybereffect.net
[20:29] <tsrk> aitd, ok, thanks
[20:30] <Kutz> tangentcollision, ctrl+alt+backspace at the login screen?
[20:30] <wolter> ardchoille, anyway, how do i disable the appearance of all those jaunty updates now? I just disabled the software sources jaunty entries..
[20:30] <EQUIV> Kutz, ctrl+alt+F1 and then log in from virtual konsoll 1
[20:30] <LostChain> Renfield: at least you can establish a network...
[20:30] <Redragon> I just wanted to say thank you to you folks for helping me today. It has to be frustrating for you dealing with a novice user like myself.
[20:30] <ardchoille> wolter: I don't think there is a way to fix that
[20:30] <Renfield> Oh, I mean that the configuration is back to dhcp, but I don't want it to be DHCP, I want to manually configure my network.
[20:30] <aitd> tsrk: np. Got to head out on errands. Good day
[20:30] <tangentcollision> Kutz: ctrl+alt+bkspc to kill xserver-xorg
[20:30] <Redragon> I was able to get wwmkr installed and am currently taking it for a test run.
[20:30] <wolter> ardchoille, about when is jaunty going to be released?
[20:30] <Renfield> Should there be a "save" button on the dialog?
[20:30] <Renfield> There is only "OK".
[20:30] <ardchoille> wolter: the jaunty stuff replaced your intrepid stuff, this is why it's a bad idea
[20:30] <tangentcollision> Kutz: then ctrl+alt+F2 to get to a terminal
[20:31] <tsrk> stupid question: how do I see all running processes?
[20:31] <ardchoille> wolter: hmm.. no idea, perhaps ask in #ubuntu+1
[20:31] <IntuitiveNipple> wolter: April 23rd or thereabouts
[20:31] <eraggo> tsrk: ps -A
[20:31] <wolter> ardchoille, well, it didn't replace any packages
[20:31] <wolter> oh ok
[20:31] <Schuenemann> tsrk,  top or ps aux
[20:31] <wolter> i can put up with that haha
[20:31] <tsrk> eraggo, ok, thanks
[20:31] <tangentcollision> Kutz: then sudo apt-get remove ubuntu-desktop
[20:31] <eraggo> :)
[20:31] <wolter> I won't update a single package for then.
[20:31] <tangentcollision> Kutz: then sudo apt-get install ubuntu-desktop
[20:31] <ardchoille> wolter: did you run apt-get update or apt-get upgrade?
[20:31] <wolter> also, is it sane to add a script to the /etc/acpi/resume.d ?
[20:31] <c0rrupt0r> quibbler: ok I found out my problem is im on ubuntu 8.04 and I have ubuntu 8.10 ppa repositories
[20:31] <wolter> ardchoille, update
[20:32] <coz_> hey  guys does any one her have link to the md5sums  the main ubuntu site seems to like to hide the darn thing
[20:32] <wolter> ardchoille, i didn't update any package but the nvidia drivers
[20:32] <Kutz> tangentcollision, waiting for the login screen to appear
[20:32] <ardchoille> wolter: you may be ok then, just remove the jaunty repos from sources and update again
[20:32] <quibbler> c0rrupt0r: i'm glad you found the problem
[20:32] <tangentcollision> Kutz: no, you're not looking for a login screen
[20:32] <Kutz> Ok, I am asking.
[20:32] <lithixium> coz_: http://releases.ubuntu.com/intrepid/MD5SUMS
[20:32] <c0rrupt0r> quibbler: thank you for your help
[20:32] <tangentcollision> Kutz: ctrl+alt+F2 to get to a terminal
[20:32] <coz_> lithixium,   thanks guy
[20:32] <Kutz> When?
[20:32] <tangentcollision> then sudo killx I think
[20:32] <tangentcollision> now
[20:32] <Kutz> When do I push them is what I am asking
[20:32] <quibbler> c0rrupt0r: you are welcome
[20:32] <tangentcollision> any time you can
[20:33] <tangentcollision> whenever they do something is good
[20:33] <Renfield> Do I need to be root in order to configure the network?
[20:33] <EQUIV> Kutz, to get back to gnome press Ctr+alt+F7
[20:33] <eraggo> Renfield: i think yes
[20:33] <Kutz> Ok, I am at this screen, Kernel 2.6.27-7-generic
[20:33] <Kutz> recovery mod
[20:33] <IntuitiveNipple> Renfield: You'll need root privileges (using sudo ....)
[20:33] <Kutz> memtest86
[20:33] <Renfield> eraggo: Then why does it let me configure it as a local user, and why doesn't it ask me for a password?
[20:34] <tangentcollision> you made it all the way back to ...
[20:34] <tangentcollision> Kutz: do everything normally
[20:34] <Kutz> ok I am at a command line
[20:34] <trygg> why does firefox scroll incredibly slow? have compiz and working drivers for my card
[20:34] <Kutz> it says grub>
[20:34] <tangentcollision> restart
[20:34] <tangentcollision> do everything like you normally do
[20:34] <IntuitiveNipple> Renfield: what user does the command "whoami" report ?
[20:34] <redvamp128> Thanks tangentcollision for stepping in-- I was just getting ready to talk that one through to Kutz.
[20:34] <eraggo> Renfield: weird... i must unlock first :D
[20:35] <durt> trygg: how much mem is firefox using?
[20:35] <Mariano> how can I install torrent, I actualy have de download?
[20:35] <Renfield> IntuitiveNipple: Sorry, can't do it. I no longer get any response from the mouse.
[20:35] <tangentcollision> redvamp128: you may have to take over soon, I have to finish moving my house
[20:35] <EQUIV> Kutz, if u go in to recovery mode u can re-install ubuntu-desktop from there
[20:35] <trygg> 250 mb
[20:35] <trygg> durt:
[20:35] <eraggo> Mariano: waht you mean? ubuntu has torrent program after install...
[20:35] <redvamp128> tangentcollision:  though I was going to have him install -- xubuntu-desktop to get to where he would have had a gui for synaptic to click the reinstall of the ubuntu but your way worked out better.
[20:36] <durt> trygg: out of what total?
[20:36] <tangentcollision> redvamp128: I have been using debian since I got my first computer when I was 8
[20:36] <Mariano> thankś, but who can use it?
[20:36] <Mariano> how, i mean
[20:36] <trygg> 1 gb
[20:37] <tangentcollision> I learned how to use command line quite well :D
[20:37] <eraggo> well. you download torrent file and open it via it
[20:37] <redvamp128> tangentcollision:  I went the way of Red Hat and Mandrake - then windowed for a while...
[20:37] <trygg> durt: everything else works fine, just firefox thats bugged
[20:37] <Mariano> yes
[20:37] <Pollywog> does anyone know why the htsearch command cannot be found in the htdig package?
[20:37] <Pollywog> Hardy Heron btw
[20:37] <quibbler> Mariano: internet>transmission
[20:37] <Kutz> ok i have the terminal
[20:37] <eraggo> Mariano: understood?
[20:37] <Kutz> I am logged in
[20:37] <Kutz> now what do I type again?
[20:37] <Kutz> sudo what
[20:38] <sirhc_> does anyone have any lirc experience and want to help a newb?
[20:38] <Mariano> let me see please
[20:38] <tangentcollision> redvamp128: I use windows for my main computer, ubuntu for server, and openSuSE 11.1 for my laptop
[20:38] <Pollywog> I am using Flock and it works even though Firefox is buggy
[20:38] <tangentcollision> okay, bye
[20:38] <LHC> hey all
[20:38] <durt> trygg: firefox scrolls slow for me when it's using more then 50% of my mem (450mb total)
[20:38] <eraggo> LHC: hi :)
[20:38] <LHC> hey
[20:39] <HLM11> need sound help: soundcard is soundblaste mp3+ external usb
[20:39] <Pollywog> Flock browser that is, for anyone who is having trouble with YouTube and such
[20:39] <LHC> I got something cool that I would like to know HAHA
[20:39] <Lovetospooch> hey can anyone help me?
[20:39] <LHC> does anyone have this in their home? or work. Like have a sound system that people can add sounds to a playlist
[20:39] <redvamp128> tangentcollision:  I got off windows xp after a bdsod upgrading to sp3 (installed ubuntu to recover files) and loved it so much and never looked back -- though haven't booted the Mandrake box in about 9 months now.
[20:39] <martin__> hey Evilrick
[20:39] <Schuenemann> !ask
[20:39] <wolter> my touchpad settings reset when I wake my computer..
[20:39] <HLM11> it is supported, I tried installing a win32 progam  with wine and got these errors:err:alsa:ALSA_CheckSetVolume Could not find 'PCM Playback Volume' element
[20:39] <HLM11> err:alsa:ALSA_CheckSetVolume Could not find 'PCM Playback Volume' element
[20:39] <cow_2001> is there a program for DNS caching in ubuntu? it seems dnsmasq doesn't keep its own domainname-ip table
[20:39] <IntuitiveNipple> Pollywog: htsearch should be in /usr/lib/cgi-bin/
[20:40] <LHC> im tryin to figure that out
[20:40] <Pollywog> IntuitiveNipple: ty
[20:40] <Lovetospooch> https://help.ubuntu.com/community/OpenSound its not working how do i set back alsa mixer
[20:40] <redvamp128> HLM11:  ask in #winehq they are wine issues --
[20:40] <HLM11> its not a wine issue, its a sound issue
[20:40] <robert_zaccour> is there a big difference between ubuntu and eeebuntu? can i install eeebuntu on my thinkpad?
[20:40] <Mariano> quibbler: where is :  ﻿internet>transmission
[20:40] <thechris> how do i restart samba?
[20:40] <redvamp128> HLM11:  it is how wine handles sound issue...there are things you need to add to the -- wine registry to fix them.
[20:40] <Pollywog> IntuitiveNipple: do you which package I need to install to get that?
[20:41] <sirhc_> how can i tell which udp port a usb device is on?
[20:41] <Pollywog> thechris: /etc/init.d/samba restart
[20:41] <HLM11> its not just wine its everything
[20:41] <IntuitiveNipple> Pollywog: htdig
[20:41] <o_o> q issuh???
[20:41] <HLM11> I have no sound on anything
[20:41] <Pollywog> IntuitiveNipple: ty
[20:41] <IntuitiveNipple> Pollywog: See http://packages.ubuntu.com/search?searchon=contents&keywords=htsearch&mode=exactfilename&suite=intrepid&arch=any
[20:41] <robert_zaccour> is there a big difference between ubuntu and eeebuntu? can i install eeebuntu on my thinkpad?
[20:41] <o_o> Dx
[20:41] <quibbler> Mariano: in your main menu...applications-internet-transmission
[20:41] <redvamp128> HLM11:  I was only going by what you said about wine earlier and I get them but the sound does work..
[20:42] <thechris> Pollywog: no, there is no samba in /etc/init.d
[20:42] <redvamp128> !sound | HLM11:
[20:42] <n8tuser> robert_zaccour -> why not try it and let us know how it goes?
[20:42] <Pollywog> thechris: let me check
[20:42] <Mariano> eraggo ﻿where is :  ﻿internet>transmission
[20:42] <robert_zaccour> just figured an answered question would be an hour faster?
[20:42] <titan_ark> hey could someone please help me with updating Transmission
[20:43] <Pollywog> thechris: I think you do not have the samba server installed
[20:43] <titan_ark> there is some change in the repository and am a n00b. i am unable to figure it out
[20:43] <anom01y> hey guys I formatted reformatted a 4gb usb stick, and now I can't change the permissions on it.
[20:43] <Pollywog> did you install the package with a deb?
[20:43] <Pollywog> or tarball?
[20:43] <Guest97238> fuck you!
[20:43] <thechris> Pollywog: wow, how do i have a smb.conf?!
[20:43] <Mariano> thank a lot, eraggo and quibbler
[20:43] <durt> titan_ark: 'sudo apt-get update && sudo apt-get upgrade'
[20:43] <nickrud> !language Guest97238
[20:44] <Mariano> i found it
[20:44] <Pollywog> thechris: dpkg -l | grep samba
[20:44] <nickrud> !language | Guest97238
[20:44] <anom01y> sudo chown lsemple:lsemple /media/Disk -R gives me "Operation not permitted"
[20:44] <gartral> eeebuntu is a fork for the ASUS EEEpc
[20:44] <Lovetospooch> can anyone help me?
[20:44] <Lovetospooch> https://help.ubuntu.com/community/OpenSound its not working
[20:44] <Pollywog> maybe he has Tourette's Keyboard Syndrome
[20:44] <thechris> Pollywog: you seem to be correct, i'm just suprised I have samba config files without actually having samba
[20:44] <Pollywog> oic
[20:44] <Lovetospooch> can i install back alsa
[20:44] <Lovetospooch> ?
[20:45] <Renfield> IntuitiveNipple: whoami reports jlmlocal. This is the user that I was forced to create when I installed Ubuntu 8.10 amd64.
[20:45] <titan_ark> durt: Just that? I checked their site and it talks about some change in repository etc
[20:46] <Pollywog> IntuitiveNipple: ty I indeed have htsearch where you said it should be
[20:46] <IntuitiveNipple> Renfield: Okay, then in reference to your earlier question, you should need to use 'sudo...' in order to execute commands to configure the network
[20:46] <martin__> Evilrick,  I paste you solution Here >>> http://paste.ubuntu.com/118168/
[20:46] <Renfield> IntuitiveNipple: I did sudo su - to root, and change the password, since I don't remember being given the opportunity to set the password.
[20:46] <durt> titan_ark: you want to install outside of the repos?
[20:46] <martin__> was a good day
[20:46] <Renfield> IntuitiveNipple: Ok, so if I select the network configuration from the Ubuntu desktop, how do I get it to "sudo" as necessary?
[20:46] <IntuitiveNipple> Renfield: Hmmm... you set a password for the root user? In Ubuntu, we don't usually do that.
[20:46] <Renfield> Oh?
[20:46] <Elda> I was worried in getting a dell 1501 that it would be hard to get linux working on, but I am very glad that it works much better than my Toshiba did xD
[20:46] <ardchoille> Renfield: sudo/gksudo do anything you need, there's no real reason to set a root password. I haven't had to do it in 4 years with Ubuntu
[20:47] <Elda> Even with an ati card
[20:47] <IntuitiveNipple> Renfield: From the desktop, the network configuration tools will know when to ask for permissions and prompt you
[20:47] <Renfield> Oh, I'm just used to root always having a password.
[20:47] <Renfield> Ok, so I'll go and unset the root password.
[20:47] <ardchoille> Renfield: The default root accoount in Ubuntu is locked
[20:47] <ardchoille> !rootsudo | Renfield
[20:47] <titan_ark> durt, I am sorry, I am new to linux, I hardly understand this. Tried updateing using sudo apt get install but it did not help. I just want to update from 1.3 to the latest version because i want to use the scheduler feature etc
[20:47] <HLM11> after going through the trouble shooter, my sound should be working, but it is not
[20:47] <Renfield> I'm used to much more low-level system configuration.
[20:48] <IntuitiveNipple> Renfield: In Ubuntu the initial user is added to the "admin" group, which is allowed root permissions via sudo.
[20:48] <Renfield> ardchoille: I know about sudo.
[20:48] <ardchoille> Renfield: unset root password instructions are here: https://help.ubuntu.com/community/RootSudo
[20:48] <Renfield> ardchoille: Thanks.
[20:48] <ardchoille> yw
[20:48] <IntuitiveNipple> Renfield: I usually just do "sudo su" to become root
[20:48] <Renfield> I think I know too much for my own good here.
[20:48] <Daria_F> http://www.devdaily.com/java/jwarehouse/jext-src-5.0/src/lib/org/jext/dawn/io/FileManager.java.shtml
[20:48] <ardchoille> Renfield: hehe
[20:48] <IntuitiveNipple> Renfield: lol it happens to us all
[20:48] <durt> titan_ark: not the way ubuntu works. The next version of transmission will be in Jaunty, out in the end of April.
[20:48] <Renfield> IntuitiveNipple: Yea, I know what you mean.
[20:49] <Myrtti> IntuitiveNipple: :-<
[20:49] <Schuenemann> more about sudo: http://xkcd.com/149/
[20:49] <redvamp128> HLM11:  okay still no sound with alsa -- What is your sound card -- should do a lspci should tell you what ubuntu says it is.
[20:49]  * IntuitiveNipple sings ...If sussie loves sudo like I love sudo ... la la la
[20:50] <titan_ark> durt: but i just checked and 1.4 was released for ubuntu in jan and Feb 14th they have released 1.5 for ubuntu
[20:50] <Titan8990> Renfield, that means its time to move on to #gentoo :)
[20:50] <titan_ark> durt: http://forum.transmissionbt.com/viewtopic.php?f=13&t=5604#p31095
[20:50] <maxime_> typing /etc/profile
[20:50] <IntuitiveNipple> Renfield: if you configure the network manually using ifconfig or /etc/network/interfaces, NetworkManager will stop managing that interface automatically.
[20:50] <maxime_> in terminal
[20:50] <durt> titan_ark: ok give me two secs
[20:50] <maxime_> says permission not granted
[20:50] <maxime_> wth 6
[20:50] <maxime_> 6
[20:50] <maxime_> ?
[20:50] <FloodBot2> maxime_: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[20:50] <titan_ark> durt: sure thanks :)
[20:51] <HLM11> it is not a pci soundcard, it is an external usb soundcard, it is listed as supported
[20:51] <Titan8990> maxime_, /etc/profile is a text file, you cant execute it....
[20:51] <redvamp128> okay HLM11 then lsusb I think is the command
[20:51] <maxime_>  titan: oh...
[20:51] <HLM11> Bus 003 Device 004: ID 041e:3010 Creative Technology, Ltd SoundBlaster MP3+
[20:51] <maxime_> titan: noob here :P
[20:52] <redvamp128> HLM11:  let me do some reasearch now..
[20:52] <Titan8990> maxime_, if you are wanting to use values in /etc/profile you need to do:   source /etc/profile
[20:52] <HLM11> Thanks
[20:52] <maxime_> titan: that should bring me to the config right
[20:52] <sirhc_> has anyone ever used gnome-lirc-properties?
[20:52] <Titan8990> maxime_, that will update your PATH when the one listed in /etc/profile, but it should be that way by default
[20:52] <Renfield> Titan8990: This is my first non-gentoo installation in many years!
[20:52] <Titan8990> maxime_, no, if you want to edit it:   sudo nano -w /etc/profile
[20:52] <Titan8990> Renfield, hehe
[20:53] <maxime_> thanks titan: im there , lol..feel like im going to have fun :P
[20:53] <lynn> hi maxi
[20:54] <redvamp128> HLM11:  I am looking at the alsa main page and most say to plug speakers into the  stereo jack -- still reading though
[20:54] <Titan8990> maxime_, I highly recommend you make a backup of it before making changes:   sudo cp /etc/profile /etc/profile.BAK
[20:55] <redvamp128> HLM11:  This is what I found so far Matrix:Module-usb-audio - AlsaProject <http://www.alsa-project.org/main/index.php/Matrix:Module-usb-audio>
[20:55] <HLM11> I have no sterer jack, there is a line in line out and a fron port for a headset
[20:55] <HLM11> stereo*
[20:55] <chthp> anyone good with J2ME (mobile applications) here ?
[20:56] <KDE4000> join #freenode
[20:56] <Renfield> IntuitiveNipple: So do you recommend manually setting the network configuration from /etc/network/interfaces?
[20:56] <KDE4000> miessed /
[20:56] <marcelkoopman> if i chroot to another ubuntu installation, the network doesnt work, why is that?
[20:56] <maxime_> titan , that way itll be located right besides the profile file ?
[20:56] <j85wilson> does anyone have a good reference on udev, sysfs, hal, etc?  Especially with an eye towards ubuntu?
[20:57] <IntuitiveNipple> Renfield: For normal use, no, I'd leave NetworkManager to it. But be aware that any manual changes will stop NM from managing the interface
[20:57] <marcelkoopman> chroot is a jailed environment of another installation right?
[20:57] <Schuenemann> what package do I need for the mysql driver for php? I thought it was php5-mysql
[20:57] <IntuitiveNipple> marcelkoopman: Have you bound /dev/ and /sys/ (as well as /proc/) into the chroot?
[20:58] <n8tuser> j85wilson -> http://reactivated.net/writing_udev_rules.html
[20:58] <marcelkoopman> IntuitiveNipple, no I just mount and chroot
[20:58] <Renfield> IntuitiveNipple: Well, ok, but I have yet to get NetworkManager to work! I'm trying to do things the Ubuntu way.
[20:58] <j85wilson> n8tuser: thanks.  I will take a look.
[20:58] <marcelkoopman> IntuitiveNipple, its an option of chroot i presume?
[20:59] <Renfield> IntuitiveNipple: I deleted the auto eth0 config, and tried creating a new one. This new one never gets a network config, and the MAC address area is blank. Do I need to provide a MAC address?
[20:59] <Renfield> Er I mean it never "sees" the network.
[20:59] <n8tuser> Renfield -> post your  /etc/network/interfaces file
[20:59] <vigo> How do I upgrade SeaMonkey? I downloaded the 1.1.4 , it is a GTK installer but I do not know what to do after that.
[20:59] <IntuitiveNipple> marcelkoopman: It might help to "sudo mount --bind /proc $CHROOT/proc && sudo mount --bind /dev $CHROOT/dev && sudo mount --bind /sys $CHROOT/sys"
[21:00] <tuna-fish> A stupid gnome question: how can i set a program to open automatically when someone logs into a sessions
[21:00] <IntuitiveNipple> Renfield: No, that is, I think, for if you want to set a specific MAC
[21:00] <IntuitiveNipple> marcelkoopman: Of course, after you exit the chroot you should umount $CHROOT/{proc,dev,sys} too
[21:01] <Renfield> n8tuser: It is just two lines: auto lo \n iface lo inet loopback
[21:01] <n8tuser> tuna-fish -> launch it in .bashrc ?
[21:01] <martin__> where is the directory ween Istambul has your files too upload a new configuration video off compiz :)
[21:01] <j85wilson> tuna-fish: run gnome-session-properties or some such
[21:01] <redvamp128> HLM11:  I have found numerous launchpad bug reports for that card though you could try what is on this page and see if you can make some sense to it -- Matrix:Module-usb-audio - AlsaProject <http://www.alsa-project.org/main/index.php/Matrix:Module-usb-audio>
[21:02] <n8tuser> Renfield -> you wanted to add eth0?  a sample can be had from  man interfaces
[21:02] <Renfield> n8tuser: Well, I'd like it to just work from the GUI, isn't that what people are supposed to use?
[21:02] <n8tuser> Renfield -> not necessarily, one can still use good ole cli
[21:03] <baz> whats a good system *log* file to look at?
[21:03] <Sale023> where to download znc for shell
[21:03] <Schuenemann> what package contains the mysql driver for php?
[21:03] <dayo> Renfield: you can use the gui, or you can also edit the /etc/network/interfaces file  (which is what i usually do)
[21:03] <nootrope> how do i make a D/L'ed binary executable from Nautilus double-click or, better, get it to launch from a panel/menu? It's not in any repositories and I D/L'ed it as a .tar.gz. and unarchived it into ~/opt
[21:03] <dayo> Schuenemann: LAMP, i think
[21:03] <marcelkoopman> IntuitiveNipple, thanks
[21:03] <Renfield> dayo: The GUI is not working.
[21:03] <Schuenemann> dayo,  lamp has a lot of stuff
[21:04] <tangentcollision> lamp has everything you need
[21:04] <Schuenemann> tangentcollision,  I already have everything, I just need the driver now
[21:04] <Renfield> I thought Ubuntu was supposed to be user friendly, I can't believe this just does not work at all.
[21:05] <vigo> baz: System>Admin>System Log
[21:05] <IntuitiveNipple> Schuenemann: http://packages.ubuntu.com/intrepid/php-db
[21:05] <dayo> Renfield: what do you mean by "not working"
[21:05] <maxime_> Renfield: give it time, i once was like you, padawan
[21:05] <Renfield> Should I check the box that says "system setting"?
[21:05] <quibbler> baz: system-administration-system log
[21:05] <imbecilin> what's the terminal command to call ubuntu text editor?
[21:06] <maxime_> no kidding, its worth the work and patience needed
[21:06] <dayo> Schuenemann: u want just the mysql driver?
[21:06] <kinji> So how do i disable the emulate 3 button for my mouse. I checked the xorg.conf file and found nothing about to the mouse
[21:06] <IntuitiveNipple> Renfield: It might be an idea to restart NetworkManager, in case you've just confused it :)
[21:06] <Renfield> dayo: I believe I have configured the network settings from the GUI, but I have no connection.
[21:06] <maxime_> Renfield: : what are you migrating from ?
[21:06] <Renfield> maxime_: Bare metal.
[21:06] <wubrgamer> hey guys
[21:06] <maxime_> bare metal !?
[21:07] <Schuenemann> IntuitiveNipple,  I'm not sure that's what I need. I'm trying to configure mediawiki: http://rafb.net/p/sJI14n53.html
[21:07] <Renfield> maxime_: What do you mean by migrating?
[21:07] <j85wilson> Renfield: I hated Linux for the first month I used it.  And that was in c. 2000.  Things have gotten a lot better since.
[21:07] <IntuitiveNipple> Renfield: If you think you've configured it, "ifconfig" and "ip route show" should show the settings
[21:07] <Renfield> This is a new install.
[21:07] <imbecilin> what's the terminal command to call ubuntu's text editor?
[21:07] <Renfield> IntuitiveNipple: ifconfig shows up broadcast, not the IP address I added.
[21:07] <wubrgamer> I need to reinstall an OS, what is the best way for me to back up an entire ubuntu-readable partition to another ext3
[21:07] <Schuenemann> imbecilin,  gedit
[21:07] <dayo> Renfield: open a terminal and type:  ifconfig -a     then pastebin the output
[21:07] <wubrgamer> should I do it as root?
[21:07] <wubrgamer> which commadn should I enter to do so?
[21:08] <maxime_> Renfield: : migrated from vista here.. :P thats the worst scenario ever, you'll be just fine
[21:08] <wubrgamer> also, should I do it in knoppix?
[21:08] <quibbler> imbecilin: gedit
[21:08] <IntuitiveNipple> Renfield: hmm, then it isn't doing it's job... maybe worth checking /var/log/daemon.log for clues
[21:08] <Renfield> IntuitiveNipple: Ok.
[21:09] <HLM11> I get the following error when trying to test my sound...
[21:09] <HLM11> audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Could not open audio device for playback.
[21:09] <n8tuser> Renfield -> remove roaming mode in the gui if there is a box checked.
[21:09] <tlchack5> hey yall, i installed kdevelop on my comp and i cant find it in the applications menu
[21:09] <G-Bleezy> Hey when you just type "xgl" at the command line should something happen??
[21:09] <Titan8990> HLM11, try:   sudo adduser USERNAME audio
[21:10] <G-Bleezy> it says command not found when i do that...but maybe that is supposed to happen?
[21:10] <Titan8990> tlchack5, try:   which kdevelop
[21:10] <galois-> Is http://www.itsecurity.com/features/ubuntu-secure-install-resource/ still up to date? Seems to be pointing to software last updated in 2005?
[21:11] <tlchack5> titan8990, what?
[21:11] <HLM11> after adding myself to the audio group the same thing happens during testing
[21:11] <G-Bleezy> hey is XGL a command?
[21:11] <KaptenRodSkagg> is there ant easy way to backup ubuntu&programs&settings to a dvd/hd or something
[21:11] <G-Bleezy> or no?
[21:11] <Renfield> IntuitiveNipple: It mentions "Could not acquire the NetworkManager service, as it is already taken", then "Failed to start the dbus manager".
[21:11] <wubrgamer> anyone? I need to backup an entire partition, how do I do so? I've installed /home on a separate partition
[21:11] <HLM11> what is OSS, because that plays the sound for me just fine, why wont alsa work?
[21:11] <wubrgamer> i have another hard disk
[21:11] <wubrgamer> how do I do this safely?
[21:12] <Renfield> wubrgamer: rsync is my suggestion.
[21:12] <IntuitiveNipple> Renfield: ouch! I suggest trying a) log-out/log-in or b) restart
[21:12] <wubrgamer> rsync?
[21:12] <quibbler> G-Bleezy: no
[21:12] <wubrgamer> what switches should I use with rsync?
[21:12] <redvamp128> HLM11:  looks like someone else is helping you-- I read about 6 pages on that issue-  I just have one question-- when you setup Ubuntu-- was this usb plugged in? or added after?
[21:12] <G-Bleezy> k
[21:12] <wubrgamer> rsync is complicated and the man page makes my simpleton brain hurt
[21:12] <Renfield> IntuitiveNipple: Ugh, is the Ubuntu, or Windows?
[21:12] <wubrgamer> lol
[21:12] <tsrk> what user does proftpd run as by default?
[21:12] <IntuitiveNipple> wubrgamer: Do you want to save an image of the entire partition, or to back-up the *files and directories* ?
[21:12] <baz> vigo, quibbler thanks thats what i was looking for
[21:13] <wubrgamer> IntuitiveNipple: just the files
[21:13] <IntuitiveNipple> Renfield: I blame the user :p
[21:13] <wubrgamer> and directories and such
[21:13] <wubrgamer> i don't need to image it
[21:13] <Renfield> IntuitiveNipple: haha!
[21:13] <wubrgamer> i don't have the SPACE to image it
[21:13] <tlchack5> where is kdevelop when you install it? i installed it on xubuntu and i cant find it. idk what version of kdevelop it is, i just typed "sudo aptitude install kdevelop" into terminal
[21:13] <IntuitiveNipple> wubrgamer: Then something like "rsync -a /source/dir/ /dest/dir/"
[21:13] <wubrgamer> -a?
[21:13] <Renfield> wubrgamer: -a == archive.
[21:14] <HLM11> it was plugged in during install.. its almost never removed
[21:14] <Titan8990> tlchack5, try:   which kdevelop
[21:14] <Mariano> there are another program to download mp3?
[21:14] <wubrgamer> and -a won't drop any direcotries
[21:14] <wubrgamer> and it'll include all hidden files and "
[21:14] <wubrgamer> "dot-files" ?
[21:14] <IntuitiveNipple> wubrgamer: read the man-page: "man rsync"
[21:15] <Schuenemann> IntuitiveNipple,  hmm... that did not solve it
[21:15] <Renfield> Woa, reboot fixed it!
[21:15] <wubrgamer> well, thanks guys
[21:15] <Titan8990> wubrgamer, you have to specifically tell it to exclude hidden files
[21:15] <Schuenemann> IntuitiveNipple,  do I have to recompile it?
[21:15] <HLM11> what is OSS, and why does that work when alsa mixer does not?
[21:15] <Renfield> That's just wrong. I've never had to reboot a Linux system before in order to get networking working. Oh, well. It is a sign of the times.
[21:15] <HLM11> im a linux newbie
[21:15] <IntuitiveNipple> Schuenemann: I'm not sure then... the error message in the pastebin indicated the solution was to change the actual build options of the package, but I can't imagine that it's being shipped without that support - lots of people would have complained by now!
[21:16] <Mariano> ﻿there are another program to download mp3?
[21:16] <rdw200169> Renfield, in the future, you can restart networking via /etc/init.d/network restart
[21:16] <n8tuser> Mariano -> wget
[21:16] <Renfield> rdw200169: I did that, and that did not help.
[21:16] <optical> Hi all -- really easy quesiton.  If I sudo to another user inside my terminal in Gnome, and try to run something like firefox, it says it can't open display :0.0 .  WHat is the correct way to run firefox as another user, or other GUI apps?  Thank you in advance!
[21:16] <rdw200169> Renfield, *networking
[21:16] <Schuenemann> IntuitiveNipple,  isn't it what is told here? http://www.php.net/manual/en/faq.databases.php#faq.databases.mysql.php5
[21:16] <HLM11> !sound
[21:16] <Schuenemann> IntuitiveNipple,  sorry, here actually: http://www.php.net/manual/en/mysql.installation.php
[21:17] <Mariano> where can i found ﻿wget? :-D
[21:17] <Titan8990> Schuenemann, you should look at ubuntu specific documentation
[21:17] <Titan8990> Schuenemann, ubuntu likes to change things....
[21:17] <HLM11> grr
[21:17] <rdw200169> Renfield, unless there's a driver/kernel issue, networking can always be restarted, or fixed, via either ifup/ifdown, /etc/init.d/networking, ip, ifconfig, etc...
[21:17] <HLM11> this is not working for me, why?
[21:17] <redvamp128> !oss | HLM11
[21:18] <Mariano> ﻿n8tuser: ﻿where can i found ﻿wget? :-D
[21:18] <dayo> Marian: wget is already installed on your system. open a terminal and type:  man wget
[21:18] <Titan8990> Mariano, type:   which wget
[21:18] <martin__> wget http:ubuntu.com
[21:18] <redvamp128> HLM11:  Oss is 4Front Technologies <http://www.opensound.com/>
[21:18] <n8tuser> Mariano -> apt-get install wget
[21:18] <Mariano> titan8990: in the terminal?
[21:19] <optical> Does anyone know how I properly run GUI apps as another user ?
[21:19] <Titan8990> Mariano, always
[21:19] <HLM11> is there a way to change default soundplayer from alsamixer to OSS?
[21:19] <Titan8990> HLM11, its not a soundplayer, its a sounddriver
[21:19] <HLM11> thats what I mean... I guess
[21:19] <redvamp128> HLM11:  yes -- system- prefereces-- sound then change them to oss -
[21:19] <Titan8990> HLM11, you can blacklist the alsa modules or you can unintall them
[21:20] <Titan8990> HLM11, if I'm not mistaken, OSS is a dead technology
[21:20] <HLM11> the dead technology is working for me though -.-
[21:20] <Renfield> Oh, I spoke too soon. Although the IP address is configure, the default route is not, and /etc/resolv.conf is not properly populated.
[21:20] <Titan8990> HLM11, you should always use alsa unless you have legacy equipment not supported by alsa
[21:20] <redvamp128> HLM11:  instead of using the autodetect Titan8990 though if it works for him then he has sound
[21:21] <IntuitiveNipple> Schuenemann: The package is built with "--with-mysql=shared,/usr" amongst many others
[21:21] <HLM11> its set to alsamixer for device, the OSS is not there...
[21:21] <dayo> Renfield: see why the command line is preferrable to gui? ;-)
[21:21] <Titan8990> redvamp128, ah, well I have no idea how to turn off the automagik features of ubuntu, my distro uses alsaconf
[21:21] <elementz> how can i figure out which process is using /dev/video0 ? something seems to block access to it
[21:21] <Titan8990> HLM11, alsamixer is not a device, it is volume control for alsa devices
[21:21] <redvamp128> HLM11:  If you change them there could be listed as Open Source Sound
[21:21] <n8tuser> elementz -> lsof -i /dev/video0
[21:22] <Titan8990> HLM11, type alsamixer in the terminal or:  man alsamixer
[21:22] <elementz> thx
[21:22] <Titan8990> HLM11, for additional information
[21:22] <redvamp128> HLM11:  or Open SOund System
[21:22] <Renfield> dayo: I'm about to write a couple dozen bug reports.
[21:22] <IntuitiveNipple> Schuenemann: That error report in pastebin - was it generated by the mediawiki installer?
[21:22] <HLM11> alsamixer is all the way up
[21:22] <dayo> Renfield: really?
[21:23] <Schuenemann> IntuitiveNipple,  yes. The configure script, actually.
[21:23] <Titan8990> HLM11, have you gone through the sound troubleshooting pages?
[21:23] <tlchack5> is ruby a good place to start learning to program on the linux platform?
[21:23] <Renfield> No, I'm joking, but it would make me feel better.
[21:23] <HLM11> yes
[21:23] <redvamp128> HLM11:  Does it even list in the drop down the OSS Open sound system (that is what it is listed there for mine)
[21:23] <Titan8990> tlchack5, you should view the programming focums on the ubuntu forums
[21:23] <violento> k pasa
[21:23] <HLM11> where?
[21:23] <Titan8990> tlchack5, there is some excellent links
[21:23] <tangentcollision> violento: que pasa
[21:23] <HLM11> im a linux newbie
[21:23] <evilGUI_> for some reason I think denyhosts is locking me out of my server how can I remove my IP for the list?
[21:23] <redvamp128> HLM11:  - system- preferences - sound
[21:23] <martin__> OM
[21:23] <dayo> tlchack5: i'd recommend python   http://python.org    #python
[21:24] <HLM11> which area?
[21:24] <Titan8990> tlchack5, but personally, I recommend python with this MIT book:  http://www.greenteapress.com/thinkpython/thinkCSpy/html/index.html
[21:24] <HLM11> apparently I have several soundports
[21:24] <Schuenemann> IntuitiveNipple,  how do I stop apache again?  If /etc/init.d/apache2 stop I still see the processes with ps aux | grep apache
[21:24] <dayo> evilGUI: /etc/hosts.deny
[21:24] <HLM11> for device?
[21:24] <tlchack5> alright, thank you =]
[21:24] <IntuitiveNipple> Schuenemann: You mean http://your_machine/wiki/config/
[21:24] <Titan8990> tlchack5, don't attempt to use the tutorial on python.org, it is written for people who are already programmers
[21:24] <tlchack5> oh
[21:24] <Schuenemann> IntuitiveNipple,  yes
[21:24] <IntuitiveNipple> Schuenemann: That is how to stop it, yes
[21:24] <violento> o.O?
[21:25] <Titan8990> tlchack5, it doesn't teach concepts and a programming way of thinking
[21:25] <violento> hey nose ingles
[21:25] <IntuitiveNipple> (sudo /etc/init.d/apache2 stop)
[21:25] <redvamp128> HLM11:  what I would do is move each down and click test see where one works (though if oss works ) it should work if set there.
[21:25] <Titan8990> tlchack5, and for programming in python, I recommend EMACs
[21:25] <violento> hola
[21:25] <martin__> juntate con nosotros en el canal ubuntu-es
[21:25] <violento> nose ablas ingles
[21:25] <Schuenemann> IntuitiveNipple,  sigh... it says it stopped, but the processes are still there
[21:25] <violento> k pasa
[21:25] <tangentcollision> Titan8990: what should I get if I'm trying to start out with perl, I have two perl books, but they assume I know everything about programming
[21:25] <tlchack5> ik concepts like assigning variables and etc from when i programmed (limited) in c++
[21:25] <HLM11> that is done, the test works, but sound doesnt
[21:25] <zamarax> does anyone know a way to listen to itunes shared libraries on ubuntu?
[21:25] <martin__> violento,  ubuntu-es
[21:25] <Geek`N`Proud> !es
[21:25] <kayetanadmin> burning doesnt work
[21:25] <dayo> tlchack5: what Titan8990 said. u might want to google a book called "Dive into Python"
[21:25] <kayetanadmin> whoops changin name to something132
[21:25] <IntuitiveNipple> Schuenemann: something maybe has locked the server up
[21:26] <HLM11> there is no selection for my device with anything other than alsa mixer
[21:26] <something132> changed
[21:26] <something132> :P
[21:26] <Geek`N`Proud> martin__, ubottu makes it so much quicker ;)
[21:26] <tlchack5> what is emacs?
[21:26] <something132> ok as i said burning isnt working
[21:26] <martin__> fyyyyyyyyyyyyyy
[21:26] <tlchack5> can i type the sudo command in terminal to download it?
[21:26] <Titan8990> tangentcollision, I have no experience with perl, but I do know that is syntax is very different from most languages, perl typically isn't recommended for beginners but is a very useful language
[21:26] <redvamp128> HLM11:  can you click the dropdown and take a screenshot and paste it at www.imagebin.ca -- (to do a screenshot hit the print screen key then name it)
[21:26] <zamarax> does anyone know a way to listen to itunes shared libraries on ubuntu?
[21:26] <HLM11> which dropdown do you want?
[21:27] <Titan8990> tlchack5, EMACS=  electronics, mathematics, and computer science
[21:27] <tlchack5> oh, is it  aprogram?
[21:27] <tlchack5> nvm, lol ill google it =P
[21:27] <redvamp128> HLM11:  the first one should be the one for the main sound- though I can't understand why the test works but then no sound (do you get sound at sites like youtube?)
[21:27] <Titan8990> tlchack5, it allows you to have syntax highlighting text editor in compination with a interactive python shell
[21:27] <tlchack5> oh cool
[21:27] <Titan8990> tlchack5, it should be available in the repositories
[21:27] <chazco> Hi... during some shutdown attempts there is a popup saying that an application is still running. How can I find out what it is?
[21:28] <tlchack5> alright, thank you very much =] i appreciate the help
[21:28] <Titan8990> tlchack5, np
[21:28] <something132> ok i am not sure whether it helps but the file i am burning is an AVI
[21:28] <redvamp128> HLM11:  find the volume control right click on it choose prefernces -- then set it for OSS (could be the volume is muted) though should be muted in the test-
[21:28] <dayo> zamarax: banshee, rhythmbox, Amarok, aTunes don't work?
[21:28] <Titan8990> !itunes | zamarax
[21:28] <zamarax> no, I read that itunes recently blocked a bunch of programs
[21:29] <Titan8990> zamarax, that is very possible....
[21:29] <Evilrick> I got a problem with 8.04 HH, as of a few weeks ago my removable media stopped automounting. MMC cards, USB disks, CD rom drive and SAMBA shares. I can still mount them manually with sudo mount so its not a hardware issue. If I log into Gnome as root then the automounting works. I have checked my settings in gconf-editor and the settings in my user administration tool. Any Ideas? here are my...
[21:29] <dayo> zamarax: wow that sucks.
[21:29] <Evilrick> ...subsystem logs http://paste.ubuntu.com/117863/
[21:29] <tangentcollision> zamarax: wine
[21:29] <mohan43u> hi
[21:29] <zamarax> yeah, I mean, I know it's not a ubuntu / linux issue, stupid apple blocking other programs
[21:29] <dayo> !welcome | mohan43u
[21:29] <zamarax> do you know of a way to make itunes work in wine?
[21:29] <Titan8990> !appdb | zamarax
[21:30] <unknown_> hello, can anyone tell me what's going on with my system? When I type netstat, I see that I've got many connected ports... Please look at that http://pastebin.com/m5a2050f0 thanks in advance for any tips :)
[21:30] <zamarax> I've searched for that as well, and as far as I can tell it doesn't
[21:30] <Titan8990> zamarax, I have heard of people running windows VMs just for itunes....
[21:30] <something132> anyone helping me with my problem?
[21:30] <Titan8990> zamarax, its unfortunate, ipods are a good product....
[21:30] <Out_Cold> Evilrick, i have the same problem.... perhaps add the drive to the /etc/mtab?
[21:30] <something132> burning problem
[21:30] <benc> how do I add something to the PATH on ubuntu?
[21:30] <zamarax> ahh, damn, that is what I don't want to do, but thanks for the insight, I just didn't know if I was missing something
[21:31] <something132> people????
[21:31] <something132> ok i am going to #alsa
[21:31] <redvamp128> something132:  I had some issues with Brasero when I ran 8.10 but I installed gnomebaker and it worked like a charm-- I would start with that first.
[21:32] <something132> i think it is to do with the AVI files?
[21:32] <HLM11> http://imagebin.ca/view/pGg6vNX.html
[21:32] <HLM11> that is the dropdown requested
[21:32] <Titan8990> benc, you have to edit your:  ~/.bashrc
[21:32] <redvamp128> HLM11:  it is listed there-- OSS
[21:32] <kronicKoH> redvamp128:  gnome breaker?
[21:33] <Evilrick> Out_Cold: yeah I can do that but its not really a solution
[21:33] <Titan8990> benc, add something like this:   export PATH='$PATH:/new/path/here'
[21:33] <HLM11> audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Could not open audio device for playback. Device is being used by another application.
[21:33] <benc> Titan8990: will it apply only to the user editing the ./bashrc?
[21:33] <redvamp128> kronicKoH:  Gnomebaker (the cd./dvd burning utility)
[21:33] <HLM11> I get that when I attempt to test sound with just OSS
[21:33] <kronicKoH> ahh
[21:33] <benc> Titan8990: I've read something about /etc/environment
[21:33] <Titan8990> benc, correct, global path changes take place in /etc/profile
[21:33] <Evilrick> Out_Cold: the worse thing is it stops me from browsing the network
[21:33] <benc> Titan8990: /etc/profile is empty
[21:33] <HLM11> regular ALSA works though..
[21:33] <Schuenemann> Titan8990,  why doesn't this damn apache stop? :-/
[21:34] <Titan8990> benc, odd.... ubuntu changes things up from the classic linux set up
[21:34] <Out_Cold> Evilrick, yea.. i came asking for a solution a few weeks ago. but i just mount in the shell
[21:34] <Titan8990> Schuenemann, have never had the issue.... does it error when you attempt to stop it?
[21:34] <redvamp128> HLM11:  so it is just when you run wine you get that issue? or does other sounds work? I would also try the plain OSS with a test (without the MP3+)
[21:34] <Schuenemann> Titan8990,  no, it says ok
[21:34] <maria> hello
[21:34] <HLM11> audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Could not open audio device for playback. Device is being used by another application. with just OSS
[21:35] <benc> Titan8990: sorry it's not empty but it doesn't have something that looks like path
[21:35] <HLM11> this is with everything, right now im 'not' listening to a youtube video
[21:35] <maria> I have a very simple question that i cant seem to get answered.  How do i install a language pack for Oo
[21:35] <opr> hello, i am having alittle trouble, every time i boot into ubuntu, my screen is always 1024x768 even though i always change it to 1280x1024 in "gksudo nvidia-settings" then i always save to X config file!
[21:35] <triaddraykin> Hello. I've been having a ton of trouble getting Ubuntu to load past a certain point. I just get an rc-default error.
[21:35] <Schuenemann> Titan8990,  http://pastebin.com/m3e291fa
[21:35] <maria> i downloaded it but dont seem to know how to get Oo to use it
[21:35] <benc> Titan8990: can I just add export at the end of /etc/profile? the reason I'm asking is because I'm not sure if the path should be for root or only the user
[21:36] <redvamp128> HLM11: I haven't used OSS in a long time-- though Strange how it works in the test but not in the os...
[21:36] <HLM11> I have them all set on ALSA right now..
[21:36] <HLM11> no mp3+ since I get an error
[21:37] <maria> when i use the package installation program
[21:37] <redvamp128> HLM11:  all tests work?
[21:37] <maria> i get the "conflicts with core" error msg
[21:37] <nootrope> can anyone tell me how to have run a shell script run from a Gnome menu item?
[21:37] <redvamp128> HLM11:  Do you have onboard sound also?
[21:37] <maria> "conflicts with installed package"
[21:37] <HLM11> I dont know how to test sound capture, but yet
[21:37] <HLM11> yes*
[21:38] <opr> hello, i am having a little trouble, every time i boot into ubuntu, my screen is always 1024x768 even though i always change it to 1280x1024 in "gksudo nvidia-settings" then i always save to X config file!
[21:38] <HLM11> redvamp128: I dont know, I have alot of plugins so im assuming yes
[21:38] <evilGUI_> I mistyped my ssh password once would that make denyhosts lock me out?
[21:38] <maria> !open office
[21:38] <maria> !language packs
[21:38] <redvamp128> HLM11:  disable that in your bios and then it should work-- I think by default what is happening is those apps are trying to go through that device and not the specified one.
[21:38] <tsrk> In proftpd, what user has to be able to read my AuthUserFile?
[21:38] <Jahooty> wheres' the bootloader config?
[21:38] <nootrope> maria, try #openoffice
[21:38] <HLM11> ok, ill restart and see what happens..
[21:38] <redvamp128> HLM11:  if you have extra speakers
[21:39] <HLM11> I do..
[21:39] <kronicKoH> hey guys, i'm having trouble, id like to install kubuntu on my laptop without a cd-rom install
[21:39] <redvamp128> HLM11:  you could plug them into the onboard and see if it plays things through the onboard-=
[21:39] <kronicKoH> i have all the cds
[21:39] <maria> nootrope....funny...im one of two people in #openoffice
[21:39] <tlchack5> does anybody anything about the book "python programming for the absolute beginner"? it supposedly teaches you how to use python by guiding you through making games... which is why im going into programming
[21:39] <kronicKoH> and another ubuntu studio  machine that has cd rom
[21:39] <kronicKoH> as well as proper install
[21:39] <nootrope> sorry, maria, it's #openoffice.org
[21:39] <Schuenemann> Titan8990,  IntuitiveNipple I needed to stop as root *sigh*.
[21:40] <maria> nootrope...thanks
[21:40] <nootrope> :)
[21:40] <evilGUI_> How do I remove a IP from denyhosts?
[21:40] <IntuitiveNipple> Schuenemann: I did suggest using 'sudo' !
[21:40] <kronicKoH> Anyone wanna assist or point me in the direction of a network install or proper vmware
[21:41] <kronicKoH> i have VNC and VMWare installed on this windows tablet machine
[21:41] <Schuenemann> IntuitiveNipple,  sorry, didn't see it. Well, now it finds the driver! Thanks
[21:41] <dayo> evilGUI: check /etc/hosts.deny   grep for your IP and if it's in there, remove it
[21:41] <IntuitiveNipple> Schuenemann: Yay!
[21:41] <Schuenemann> IntuitiveNipple,  I needed php5-mysql
[21:41] <redvamp128> zcat[1]:  pm?
[21:41] <zcat[1]> sure
[21:41] <clayg> whats the command to count words in a doc?
[21:42] <evilGUI_> dayo: I removed my IP is that all I need to do to unban it?
[21:42] <IntuitiveNipple> Schuenemann: I thought you might, but when  I searched the package archive, I got no hits that matched that!
[21:42] <dayo> evilGUI: yes, i think so
[21:42] <IntuitiveNipple> Schuenemann: So I assumed I'd mis-remembered
[21:43] <bigbrovar> .
[21:43] <dayo> evilGUI: you might need to restart denyhosts
[21:43] <kronicKoH> ANY VMWare' ers in here?
[21:43] <Geek`N`Proud> kronicKoH, me sort of
[21:44] <Azath> hello
[21:44] <kronicKoH> Geek-N:
[21:44] <HLM11> you people are too smart for me, needed to disable the legacy device in my bios and now it works flawlessly
[21:44] <quibbler> kronicKoH:  try #vnware
[21:44] <dayo> !welcome | Azath
[21:44] <quibbler> *vmware
[21:44] <kronicKoH> Geek-N: When I go to create a virtual machine, theres no room on regular, unless I have my terrabyte external drive plugged in
[21:44] <kronicKoH> should i partition?
[21:48] <opr> hello, i am having a little trouble, every time i boot into ubuntu, my screen is always 1024x768 even though i always change it to 1280x1024 in "gksudo nvidia-settings" then i always save to X config file!
[21:49] <baz> whats a nice monospace font that comes with ubuntu?
[21:49] <DigBig> Dudes ... have you seen this website ??? www.digbigbrotherjenson.be
[21:49] <ubuntu__> can someone please help ,me ? i installed a secondary windows copy for gaming purposes and now i can't boot my ubuntu ... i was wandering if the LIVE cd has a tool i can use to fix the mbr or the super grub disc if need be ?
[21:50] <qedx> @baz:  I don't think there's any that's nice. I usually end up downloading inconsolata
[21:50] <evilGUI_> What's this mean? pam_env(sshd:setcred): Unable to open env file: /etc/default/locale: No such file or directory
[21:50] <dayo> !grub | ubuntu__
[21:50] <evilGUI_> I saw that in my ssh logs
[21:51] <baz> qedx, is that available thru apt/
[21:51] <ubuntu__> dayo: thanks very much ;)
[21:51] <dayo> ubuntu__: u're welcome :-)
[21:52] <Jahooty> what partition manager does ubuntu use?
[21:52] <qedx> baz: yes
[21:52] <mrcoodles> how do i start mysql server ?
[21:52] <baz> Jahooty, gparted
[21:52] <Geek`N`Proud> ubuntu__, grub-install is a neat tool; if you ever get totally stuck try that command =]
[21:52] <Jahooty> command not found
[21:53] <this_justy_guy> Jahooty: fdisk
[21:53] <tlchack5> what channel should i be in to get help with python?
[21:53] <Geek`N`Proud> Jahooty, sudo apt-get install gparted
[21:54] <Geek`N`Proud> even on a livecd it should work
[21:54] <Geek`N`Proud> tlchack5, try  #python or ##python
[21:54] <dayo> tlchak5: #python
[21:54] <dayo> tlchack5: #python
[21:54] <tlchack5> thank you
[21:54] <dayo> tlchack5: u're welcome :-)
[21:55] <tlchack5> dayu: it says i need to be identified to join that channel
[21:55] <j85wilson> So get identified.  /msg NickServ help
[21:56] <something132> no one helpin me with my burnin prob?
[21:56] <dayo> tlchack5: u need to register your nick
[21:57] <ha1331> Having problems with hp proliant ML110 G5. I have system installed on single disk and additionaly have 2xdisks on raid array. Would like to partition and format the array, but cannot find the array. /dev/sdb and /dev/sdc are present but no /dev/md* .
[21:59] <mzz> I guess this is only tangentially on-topic, but does someone remember if windows 2000 normally overwrites grub?
[22:00] <baz> what are some other nice monospace fonts i should try installing?
[22:00] <dayo> !grub | mzz
[22:00] <dayo> mzz: yes it will
[22:00] <mzz> ty
[22:00] <mzz> (I know how to deal if it does, just wanted to know if I had to make sure I had something bootable around)
[22:01] <dayo> mzz: windows always overwrites grub
[22:01] <mzz> just proves my memory still sucks (I thought I installed it once without that happening)
[22:01] <mzz> oh well
[22:03] <alwayssleepy> hi does any one have a how to on settin up compizfusion xgl with VM 6.5?
[22:03] <alwayssleepy> im using 8.10
[22:03] <opr> guys, is there a way i can disable app armor when compiling with g++ ?
[22:03] <Renfield> Ok, this is very weird. I appears that networking is not configured until after I log in. Is this correct?
[22:04] <baz> is there a way tp apt-cache search with wildcards? Like *ttf*fixed*
[22:04] <gajop_> Renfield: I guess it depends
[22:04] <nickrud> Renfield, by default,yes
[22:04] <Renfield> Oh?
[22:04] <mzz> opr: *might* be -fdisable-stack-protector
[22:04] <gajop_> Renfield: if you're using the network manager, probably, otherwise, not so sure
[22:04] <opr> mzz, i'll try it
[22:04] <Aquina> hy guyz!
[22:05] <mzz> opr: usually if that "helps" the thing you're compiling is buggy though
[22:05] <nickrud> Renfield, if you're using network manager, yes, if not you can set up on boot connectivity
[22:05] <Renfield> Ok, I'm going to stop using the network manager. I'd like the computer to bind to my NIS domain, so that I can log in as somone on that domain, and not as a local user.
[22:05] <opr> mzz, im just making a backdoor :)
[22:06] <mzz> opr: and it's actually -fno-stack-protector (assuming apparmor is what I think it is)
[22:06] <Renfield> I thought this network manager was just a nice GUI configurator for the underlying networking files, not some other thing entirely.
[22:06] <redline5653> can somebody please help me get my wireless working properly please
[22:06] <robert_zaccour> my tv tuner/video capture won't work with justin.tv
[22:07] <robert_zaccour> i installed the hardware driver with ndisgtk, but still not working
[22:07] <porter1> robert, does justin.tv use flash
[22:07] <robert_zaccour> yes
[22:08] <robert_zaccour> is there a good broadcast site like justin.tv that i can use my tv tuner on?
[22:08] <gump^> want a torrent client wich one is available @apt-get
[22:08] <gump^> ?
[22:09] <Renfield> azureus
[22:09] <itachi> i'd say.. all of them?
[22:09] <porter1> gump^, transmission is installed by default. There's also delugo
[22:09] <porter1> deluge*
[22:09] <robert_zaccour> whats a good website for tv tuner broadcasting?
[22:09] <gump^> transmission not installed by default..
[22:09] <porter1> Which is similar to utorrent
[22:09] <Renfield> Actually, I'm guessing. I can't believe it isn't, though.
[22:09] <gump^> not on my os
[22:10] <itachi> rtorrent is nice too
[22:10] <gordonjcp> gump^: transmission is installed by default in ubuntu
[22:10] <gump^> i will try azureus, thnx Renfield
[22:10] <porter1> azureus is bloated IMO
[22:10] <redline5653> is anyone good with wireless network setups?
[22:10] <Renfield> porter1: Yea, I think you are right.
[22:10] <gump^> gordonjcp: that i know. i use acer one with kuki dist
[22:10] <porter1> It's written in Java :P
[22:11] <baz> is there a way to see/manage all installed FONTS
[22:11] <Renfield> Oh, Acer One is a hot little netbook.
[22:11] <Renfield> I got introduced just yesterday.
[22:11] <HowardNabe> does flashplayer work with the 64 bit version of Ubuntu
[22:11] <ha1331> Should raid array appear as /dev/md or is that just for software raids only?
[22:11] <this_justy_guy> Vuze (formerly Azureus) is way too much fat for a usable bittorrent client use Transmission.
[22:11] <porter1> HowardNabe, yes, but it can have some instability issues
[22:11] <jeebster> Yeah, vuze somehow became completely over...bloated
[22:12] <baz> HowardNabe, yeah, i have it working, but its a tiny bit buggy in that sometimes after lots of use i have to restart firefox
[22:12] <HowardNabe> I can not get it to work
[22:12] <mzz> gump^: or rtorrent if you like text-based apps
[22:12] <jeebster> Didn't expect Azureus to become like that :3
[22:12] <this_justy_guy> HowardNabe: There's a speical 64-bit build of flash at Adobe's lab site that you can use.
[22:12] <porter1> IF you want something that's slightly better than transmisson, though, try deluge!
[22:12] <HowardNabe> Thanks
[22:12] <gump^> only 9" lcd here =) i cant cath up! =) wich torrent is the one i shall use.. not text-based
[22:12] <gump^> ?
[22:12] <HowardNabe> Adobe's lab web site
[22:12] <mzz> gump^: try them all and pick the one you like most :)
[22:12] <ha1331> the controller is Intel Corporation 82801 SATA RAID
[22:12] <musikgoat|main> +1 porter1, deluge is actually a pretty darn good client
[22:13] <porter1> It's basically uTorrent
[22:13] <alien> guys, I have a long text file with <a href=http://www.malwaredomainlist.com/mdl.php?search=doc9c.cn>doc9c.cn</a><br><a href=http://ww how do I extract all domains and put them into another file in ubuntu CLI ?
[22:13] <gump^> mzz: guess i could but i am like beta testing for now
[22:13] <gump^> =)
[22:13] <GodfatherofEire> Is there any utility for making a multi-boot CD? Such as loading Gparted, DBAN, etc. on one CD?
[22:13] <Geek`N`Proud> GodFather, DBAN can be emulated
[22:13] <gump^> anyway thanx
[22:14] <Geek`N`Proud> and a lot of liveCDs have gparted these days
[22:14] <MarkJones> Im trying to get more dependent on the command line so can anyone say what command I use to list what /dev/xxx mount points are on my system.Know what I mean?
[22:14] <this_justy_guy> HowardNabe: http://labs.adobe.com/downloads/flashplayer10.html  remember that the 64-bit version is considered Alpha version.
[22:14] <Geek`N`Proud> dd if=/dev/zero of=/dev/sda # Fill hard disk with all zeroes
[22:14] <GodfatherofEire> Geek`N`Proud, I mean like, for a back-up Emergency CD
[22:14] <robert_zaccour> whats a good website for tv tuner broadcasting?
[22:14] <nightrid3r> do i need special software to mount mdf (alcohol120%) files ?
[22:14] <HowardNabe> Thanks again
[22:14] <Geek`N`Proud> GodfatherofEire, , yeah you can use dd to do what DBAN does
[22:14] <this_justy_guy> HowardNabe: If you really need Flash for more that YouTube and some simple action script then use a 32-bit browser.
[22:14] <Geek`N`Proud> I think knoppix has the rest
[22:15] <GodfatherofEire> I.e., if I needed to diagnose a system, I'd be using Hiren's Boot CD, Gparted, and DBAN
[22:15] <Geek`N`Proud> trouble with DBAN is it relies on an older kernel
[22:15] <robert_zaccour> whats a good website for tv tuner broadcasting?
[22:15] <HowardNabe> will the 32 bit browser run on 64 bit Linux?
[22:15] <musikgoat|main> HowardNabe: yes
[22:15] <this_justy_guy> HowardNabe: Yeah
[22:15] <Geek`N`Proud> HowardNabe, 32bit and 64bit are compatible
[22:15] <HowardNabe> OK well Perhaps I will try that first
[22:16] <this_justy_guy> HowardNabe: You'll need to add the 32-bit libs.
[22:16] <Geek`N`Proud> ia32-libs will let you use 32-bit apps
[22:16] <redline5653> please can someone help me
[22:16] <zcat[1]> Ummmmm hirens is mostly warez, perhaps you should use UBCD instead?
[22:16] <Geek`N`Proud> redline5653, how can we help you?
[22:16] <porter1> redline, just ask
[22:17] <GodfatherofEire> Geek`N`Proud, I.e., if I needed to diagnose a system, I'd be using Hiren's Boot CD, Gparted, and DBAN, and anythin else I can think of that would be helpful
[22:17] <this_justy_guy> HowardNabe: The 63-bit flash player works for YouTube and most sites I've been to but there has been one or two so far that have cause firefox to crash.
[22:17] <this_justy_guy> **63-bit
[22:17] <redline5653> i need someone to help me connect to my wireless network it wont accept the key at all
[22:17] <this_justy_guy> **64-bit  Hard to type with cat in lap.
[22:17] <Geek`N`Proud> GodfatherofEire, try using knoppix too
[22:17] <porter1> :]
[22:17] <Geek`N`Proud> knoppix is a full OS on a livecd
[22:17] <Geek`N`Proud> it is great for detecting hardware
[22:18] <GodfatherofEire> Geek`N`Proud, I know that, but I mean I need BIOS diagnosic utils as well
[22:18] <zcat[1]> Ultimate Boot CD and INSERT are generally what I use
[22:18] <Geek`N`Proud> you boot it and lspci && lsusb shows a lot
[22:18] <Geek`N`Proud> GodFatherofEire, look on the PhoenixBIOS site
[22:18] <GodfatherofEire> Alright
[22:18] <zcat[1]> there's a lot of pirated stuff on hirens which makes me feel 'dirty' using it
[22:18] <alwayssleepy> Is it not possible to run compiz in a linux guest on VM? b/c opengl is still not supported?
[22:18] <GodfatherofEire> I have no such reservations
[22:19] <fatbrain> i installed a new .so in my lib folder, what's the ld command to "refresh"?
[22:19] <napsy> Hello. I've reinstalled my Ubuntu system. The installation did not recognise my encrypted /home partition so I leaved it untouched and proceed with the installation. Now the system is installed but I don't know how to configure it to use my encrypted home. Please help.
[22:19] <nightrid3r> fatbrain ldconfig
[22:19] <dmulholland> hey, I want to launch an application and send the output to a text file, how can i do it?
[22:19] <fatbrain> nightrid3r: ah, thanks a bunch
[22:19] <erUSUL> dmulholland: app > text_file
[22:20] <naxa> 1) I've got Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) on 8.10 and no sound.
[22:20] <naxa> (lspci)
[22:20] <keystr0k> still trying to get xvidcap or istanbul or recordmydesktop to work... could my ATI drivers be causing problems? in xvidcap I always max out the fps and it dies... ONE time it worked at 10fps. I have a dedicated 256MB gfx card... and a sufficient processor (dual core intel).  Any ideas? Should I try removing the ATI proprietary drivers?
[22:21] <rdw200169> naxa, is it a relatively new motherboard... like a home-build?
[22:21] <keystr0k> I am using compiz, but I've tried these apps without compiz enabled and it's the same prob.
[22:21] <GodfatherofEire> Well, even then is there any way to have multiple bootables on one CD? Kind of like GRUB, only with CD's instead of HDDs?
[22:21] <Thokas> Hey guys, when I try to run or install Ubuntu, my monitor reads 'out of range.'
[22:21] <Thokas> How can I fix this?
[22:22] <ianm_> can anyone recommend games that work well with a wacom tablet?
[22:22] <Jahooty> is there a GUI for editing grub in ubuntu?
[22:22] <naxa> rdw200169, no, it is an older dell, gx-260 to be preciese
[22:22] <naxa> rdw200169, no modifications made. maybe some config error but i don't know how to start.
[22:23] <dmulholland> erUSUL: what if im trying to do - time app > textfile - will that work?
[22:23] <rdw200169> naxa, hmm... i don't know then... ubuntu usually does *really* well w/AC'97 audio controllers
[22:23] <Douglas_Nessmith> Question, I have a PC that crashed, I am used LiveCD to put Linux onto the system so that I can take my family pictures off of the hard drive.  I am unable to mount the drive though.  Any place to find support on this topic.  I found a place on the internet describing it but I cant get it to work. http://www.technixupdate.com/mount-ntfs-fat32-windows-drive-in-ubuntu/
[22:23] <rdw200169> naxa, the reason i asked is because many motherboards have both AC'97 and Digital Audio, and you can switch what kind it uses in the BIOS
[22:23] <erUSUL> dmulholland: you want the output of time or the output of app in the log file
[22:23] <erUSUL> ?
[22:24] <dmulholland> erUSUL: the output of time mainly - the app doesnt output anything :)
[22:24] <naxa> rdw200169, i see... dunno if that's the case. full story is that i had this ubuntu as 7.10 on a hp laptop. laptop dead but hdd saved along with ubuntu. I just started from usb and updated to ->8.04->8.10 and now sound is gone. unfortunately i don't know if it worked on the new computer in the first hand... i said to the installer to overwrite everything.
[22:24] <Royall> Is it possible to give the Windows key a function in Ubuntu?
[22:25] <itachi> Royall, absolutley.
[22:25] <naxa> rdw200169, i mean i actually *updated*, not reinstalled, with the alternate cd, and said to overwrite menu.lst blacklist and etc.
[22:25] <rdw200169> naxa, ahhh,  i see!
[22:25] <Royall> itachi: how would I give the Windows key a function in Ubuntu?
[22:25] <naxa> rdw200169, now i think maybe this is somehow a config issue, but i dont know how.
[22:25] <aykutcan> hi all !!
[22:25] <rdw200169> naxa, my experience has been that there are some scripts that run at some point during the installation that 'sets' all the config files for hardward
[22:25] <rdw200169> naxa, hardware**
[22:26] <nightrid3r> do i need special software to mount mdf (alcohol120%) files ?
[22:26] <rdw200169> naxa, you could try a dpkg-reconfigure on alsa...
[22:26] <kronicKoH> HI aykutcan
[22:26] <napsy> Hello. I've reinstalled my Ubuntu system. The installation did not recognise my encrypted /home partition so I leaved it untouched and proceed with the installation. Now the system is installed but I don't know how to configure it to use my encrypted home. Please help.
[22:26] <naxa> rdw200169, ok thanks, i will do that now. just a minute...
[22:26] <kronicKoH> !welcome | aykutcan
[22:26] <rdw200169> naxa, and see if you can't get ubuntu to retry setting up the audio, because it thinks, according to the alsa config files, that its audio card is from the laptop
[22:26] <aykutcan> thanks
[22:27] <rdw200169> naxa, and, generally, updates won't redetect hardware
[22:27] <mohan43u> aykutcan: Don't trust them .. they are bots..
[22:27] <rdw200169> naxa, the config file replacement is only for situations when you *change* config files, and the installer wants to update them for a new version
[22:27] <aykutcan> :) i know
[22:27] <dtchen> naxa: download http://www.alsa-project.org/alsa-info.sh, save it to your Desktop, run it as a bash script in a terminal, and tell me the url the script generates
[22:27] <naxa> dtchen, ok one minute
[22:28] <naxa> rdw200169, i did sudo dpkg-reconfigure alsa-base and alsa-utils... should i restart x or something? (after i finished alsa info)
[22:28] <rdw200169> naxa, you can try: /etc/init.d/alsa restart
[22:28] <RussellAlan> haha
[22:28] <rdw200169> naxa, alsa-utils
[22:29] <dmulholland> erUSUL: the output of time mainly - the app doesnt output anything :)
[22:29] <Don_Miguel> Douglas_Nessmith, Do you have a USB stick that you can use to save those files ?  I think the Live CD can do that for you .. but the CD system is not is, iirc, actually mounted
[22:29] <user___> hello
[22:30] <naxa> rdw200169, dtchen sound problem is solved, thank you for your help!!! :) i've got another problem. :) where can i check if my graphic card supports opengl? now ubuntu says me that no opengl. the card is ATI Technologies Inc Rage 128 Pro Ultra TF
[22:30] <dmulholland> `
[22:30] <rdw200169> naxa, wow, that's an old card!
[22:31] <tlchack5> hey, i have my computer running linux hooked up to the internet via a hub plugged into my laptops wifi card via a crossover cable. is there a way to share the printer my laptop (running vista) has with my computer running linux?
[22:31] <naxa> rdw200169, it was hard to find something that fits in this very compact house
[22:31] <naxa> rdw200169, this actually came with another dell
[22:32] <erUSUL> dmulholland: ok time can do it... use "time -o log.txt program"
[22:33] <naxa> rdw200169, i think this card seems quite lame. :)
[22:33] <RussellAlan> Hey ALL:
[22:33] <RussellAlan> aanyone wanna do some research on kubuntu running on a TC4400
[22:33] <dmulholland> erUSUL: thanks, didnt think of looking for that, should have
[22:33] <flint_> Greetings Earthlings...
[22:33] <rdw200169> naxa, gimme a sec, i'm googling
[22:33] <naxa> rdw200169, ok thank you! :)
[22:33] <linux_guy> can you change the size of the icons on the desktop?  the pdf is HUGE..
[22:33] <eeheh> Can anyone dare to ask some questions? *Like can I ask some auestions about Ubuntu?
[22:33] <linux_guy> !ask | eeheh
[22:34] <flint_> Anybody got a clue how to compile the source from a tomtom to make a Ubuntu executable?
[22:34] <flint_> eeheh, yea got a good question?
[22:34] <RussellAlan> flint_:  are you using the tomtom source for gps on the pc?
[22:35] <dmulholland> erUSUL: time -o not working...
[22:35] <rdw200169> naxa, hmm... i don't thing you're gonna get any luck,  that's a very old card!: http://ubuntuforums.org/showthread.php?t=3940
[22:35] <dmulholland> erUSUL: although man time is telling me it should
[22:36] <gidna> Hi
[22:36] <Robingraves> Hello :)
[22:36] <sak> hi
[22:36] <gidna> I want the bar at the bottom like that in MacOS
[22:36] <erUSUL> dmulholland: i suspect bash has built in time that is getting in the way use /usr/bin/time -o log.txt appname
[22:36] <porter1> gidna, try awn
[22:37] <sigjuice> I just installed ubuntu 8.10 on my laptop.  It is running fine but I'd like to tweak some xorg settings.
[22:37] <rdw200169> naxa, http://www.x.org/wiki/r128
[22:37] <kane77> strange things are happening here.. yesterday and day before all of sudden gnome restarted itself, and also yesterday and now my theme got replaced by other theme... can anyone help me find cause for this behavior?
[22:37] <naxa> rdw200169, in this forum, troutrou says that his ubuntu managed to enable 3d on this card. well.
[22:37] <erUSUL> dmulholland: sometimes shells s**k
[22:37] <dmulholland> erUSUL: that's a good idea, will have a look
[22:37] <sigjuice> for some reason my /etc/X11/xorg.conf file is empty
[22:37] <rdw200169> naxa, that's the driver that will work, i think
[22:37] <dmulholland> erUSUL: yeah /usr/bin/time is working, time to add an alias :D
[22:37] <naxa> rdw200169, how can i change my driver?
[22:37] <porter1> gidna, http://awn-project.org/
[22:38] <eeheh> You see, I installed Ubuntu *forgot version* a long time ago, and set it on being dual/boot. However a virus came around for windows, and while I was on windows, apprently fiddled around with ubuntu, because I could not start it anymore. Anyways, I got rid of the virus and the pc went good, until today, the windows just freezed at the login thingy, and the only way to acces it (Like i\m doing now,| Is secure mode. Anyways, so I formatted the ol
[22:38] <notyourdaddy> #join ubuntuusers
[22:38] <rdw200169> naxa, 8.10, right?
[22:38] <naxa> rdw200169, right - that's why i ask
[22:38] <eeheh> write stuff, but I got nothing out of that. So I went and restarted my pc and went into safe mode to search for help, and here I am.
[22:38] <naxa> rdw200169, i heard that there is something new with xorg lately in this field... i dunno if it autodetects or what.
[22:38] <rdw200169> naxa, chances are, there isn't even a Xorg.conf file, but since you've done some upgrades, it may still be around
[22:38] <porter1> eeheh, you should do a dist-upgrade
[22:38] <Robingraves> Can anyone tell me what the command is to see if my windows hard drive is hd1,0 or something else ?
[22:39] <eeheh> ?
[22:39] <naxa> rdw200169, should i delete instance of xorg.conf
[22:39] <naxa> ?
[22:39] <gidna> porter1 have I to be in 3d mode?
[22:39] <linux_guy> eeheh, ive found the easiest answer to windows virus problems to be making the switch to ubuntu =)
[22:39] <rdw200169> naxa, but, honestly, i have to stop here, b/c i'm still on 8.04
[22:39] <dmulholland> erUSUL: thanks for the help
[22:39] <durt> sigjuice: xorg auto-configs now, but xorg.conf is still read put your old one there if auto-config doesn't work perfectly
[22:39] <erUSUL> dmulholland: no problem
[22:39] <porter1> gidna, what do you mean?
[22:39] <Geek`N`Proud> linux_guy, need some malware to make you feel at home? :P
[22:39] <rdw200169> naxa, you will probably need it!  if it's there, it uses it, if it's not, it auto-detects
[22:39] <sparr> [how] can I use an ubuntu CD image on a bootable USB drive?
[22:39] <NFischer> Robingraves sudo blkid
[22:39] <porter1> gidna, I don't think it uses opengl, but I,'m not sure
[22:40] <porter1> You'll just have to try and find out
[22:40] <Robingraves> NFischer: Thankyou
[22:40] <naxa> rdw200169, then i should write the driver name there as usual?
[22:40] <linux_guy> Geek`N`Proud, i searched for a whole day looking for antivirus, antispyware /malware protection for ubuntu
[22:40] <eeheh> Whoa, the virus itself was pretty obibious, a pink looking squid. Besides i\m not asking for some holy grale to completly rid of windows forever, I\m just wondering how I should do to get ubuntu working. And get rid of the dual boot wich I installed long time ago.
[22:40] <flint_> RussellAlan you got it in one.  I am trying to compile the source for Markus Hoffmann's log2itn
[22:40] <linux_guy> couldnt believe the lack of availability.... then i realized
[22:40] <porter1> eeheh, blow it all away and install ubuntu again
[22:40] <eeheh> So I can install it normally *I have ubuntu on a dvd.
[22:40] <user___> a pink squid virus?
[22:41] <eeheh> smss.exe, a creepy bastards.
[22:41] <linux_guy> eeheh, a pink squid?
[22:41] <rdw200169> naxa, yes, make sure you have the driver installed: xserver-xorg-video-ati
[22:41] <TruthTaco> could someone tell me how to get my mycomputer icon on the desktop?
[22:41] <eeheh> Yhe it had that as a icon.
[22:41] <linux_guy> *eeheh has been smoking something with spongebob
[22:41] <rdw200169> TruthTaco, the easiest way to do that is using ubuntu-tweak
[22:41] <sigjuice> durt: I can't seem to set a resolution larger than 800x600 and glxinfo reports AGP 1x instead of 2x
[22:41] <TruthTaco> ah thanks
[22:41] <eeheh> So how I can format the Ubuntu partion, and get rid of the dual boot so I can install it |normally|
[22:41] <eeheh> ?
[22:41] <durt> sigjuice: card?
[22:41] <Geek`N`Proud> linux_guy, antivir is available with dazuko for on-access scanning
[22:42] <linux_guy> eeheh, you need to work on your mbr right?
[22:42] <rdw200169> eeheh, explain more of your situation and what you want to do, please
[22:42] <porter1> eeheh, when you instal, it will allow you to
[22:42] <naxa> rdw200169, i thought i need r128 ??
[22:42] <linux_guy> Geek`N`Proud, whats the point?
[22:42] <Geek`N`Proud> linux_guy: there IS a McAfee VirusScan for Linux too
[22:42] <kane77> yesterday and day before all of sudden gnome restarted itself, and yesterday and now my theme got replaced by other theme... can anyone help me find cause for this behavior?
[22:42] <rdw200169> naxa, yeah, that's where the driver is
[22:42] <Aquina> dazuko is a bit a bitch when it comes to actually using it.
[22:42] <linux_guy> Geek`N`Proud, all those scan for windows viruses
[22:42] <Geek`N`Proud> linux_guy, to protect against viruses getting in your Wine? :P
[22:42] <Aquina> Always recompile the kernel to ensure it really works.
[22:42] <naxa> rdw200169, i have "xserver-xorg-video-ati" and the same with "-video-r128"
[22:43] <Aquina> Oh and btw. conflikting modules an the like all the way.
[22:43] <linux_guy> lets get eeheh fixed up, im interested in his problem
[22:43] <rdw200169> naxa, well, that's where it is on 8.04... but just make you have it first ;)
[22:43] <methodmarvel> gotta love 8.04
[22:43] <sigjuice> durt: according to lspci, ATI Technologies Inc Rage Mobility M3 AGP 2x
[22:43] <linux_guy> eeheh, do you want an all ubuntu machine?  all windows? dual boot? vmware?  how do you want to do it?
[22:43] <naxa> rdw200169, :)
[22:43] <eeheh> First I had windows. And a linux/obbsesive friend got my to install ubuntu. So I tried it. Ran it for a day and then tought. Na I\ll play my games. Now tonight, my windows got it\s head scrambled, like it hada injection of Opium or something. So it freezes at when I try to login, I get to see the icons and all that shit.
[22:43] <rdw200169> methodmarvel, yeah, but i can't have the gnome-do dock for 0.8 :(
[22:44] <eeheh> So I tought, hey let\s start ubuntu again!
[22:44] <methodmarvel> yeah - rwd - I was trying to install that for AGES
[22:44] <methodmarvel> couldn't figure it out
[22:44] <linux_guy> does ubuntu work?
[22:44] <methodmarvel> nope
[22:44] <eeheh> So I tried to start it, but apprently after I had got that smss.exe virus away from windows, my Ubuntu got suckzord, it coulnd\t find files etc when I tried to boot it. So I tought, hell no my ass. So I went and donwloaded ubuntu.
[22:44] <Aquina> eekek the problem is either a bootloder specific one or your NTFS/FAT32 drive for Win got messed up.
[22:45] <gleyve> I have some problem with sinaptyc..anyone could help me? some dependecies problems
[22:45] <eeheh> And formatted my G drive.
[22:45] <Aquina> normally Win can fix this on boot up with chkdsk
[22:45] <eeheh> Now, the dual boot was still left in there.
[22:45] <rdw200169> naxa, i have all kinds of crazy stuff in my xorg.conf, and when i upgrade (one day) i'm gonna keep it, b/c i have dual monitors etc...
[22:45] <naxa> rdw200169, does it make sense if i write this line into the otherwise almost empty 'section "Device"': Driver "r128"?
[22:45] <eeheh> And I installed ubuntu later on on my G drive again, and restarted the comp.
[22:45] <naxa> rdw200169, fortunately this thing makes backups of itself
[22:45] <flint_> eeheh, how many drives you got in this machine?
[22:45] <naxa> at least for me
[22:46] <eeheh> Tried to start windows normally, as usual it hang up right at the spot, so I tried to go into ubuntu tru the Dual boot, wich I saw a ubuntu loading screen, you know the orange looking loader.
[22:46] <eeheh> I got 2 Hdd.
[22:46] <linux_guy> eeheh, what do you want to do?  how do you want to set it up?  do you want to dual boot still?
[22:46] <rdw200169> naxa, never *ever* trust that, make your own backups of what works well!  (that's been my motto, and its saved me several upon several times)
[22:46] <Aquina> eeheh I recommend you to use Ubuntu ONLY with seperated ext3 "partitions". Get rid of everything else. A fresh install will help.
[22:46] <flint_> eeheh, did you make a standard workstation boot CD?
[22:46] <naxa> rdw200169, that's a _very_ good motto.
[22:46] <eeheh> I got Ubuntu 8.10 burned to a dvd disk.
[22:46] <linux_guy> eeheh, i agree with aquina
[22:47] <naxa> rdw200169, i was dead a couple of times 'couse i didn't follow that :)
[22:47] <linux_guy> eeheh, are you pretty new to gnu/linux/ubuntu?
[22:47] <eeheh> Yes.
[22:47] <Aquina> seems so :-)
[22:47] <naxa> rdw200169, this should make you become practiced in configuring, however...
[22:47] <naxa> rdw200169, this is only in theory :)
[22:47] <naxa> rdw200169, hold on a sec, now I'll try and restart xorg
[22:47] <Renfield> Has anyone here installed openGEU?
[22:48] <eeheh> I just wanna remove that bitchy dual boot, so I can boot the dvd disk, install ubuntu to that partion, then make it set a new dual boot.
[22:48] <linux_guy> do yourself a favor if you are serious about it and get this FREE ebook download
[22:48] <linux_guy> http://www.ubuntugeek.com/free-download-ubuntu-pocket-guide-and-reference.html
[22:48] <mikeshollen> A few days ago I wrote a few lines of code to make my wireless driver and I pasted them into a file, which I believe was rclocal
[22:48] <mikeshollen> I can't remember what directory that was in
[22:48] <mikeshollen> And now my wireless card isn't starting on boot
[22:48] <Aquina> eeheh When booting from that DVD you created choose the Live CD option (boot Ubuntu) then klick on the installer icon on the desktop after it has sucessfully loaded.
[22:48] <naxa> rdw200169, in any case, if i never return, thank you for your help - you we're a great friend. see you - later. ;)
[22:48] <mikeshollen> Can someone tell me how to get back there to those startup files
[22:48] <rdw200169> naxa, ah, good luck!
[22:48] <flint_> eeheh, the ticket here is to do a manual partition.  The DVD boots you into Ubuntu?
[22:48] <linux_guy> mikeshollen, what version?
[22:48] <mikeshollen> 8.04
[22:48] <Imaginativeone> how do I connect my xp machine to an ubuntu share via samba?
[22:49] <naxa> rdw200169, I will be BACK! :)
[22:49] <rdw200169> naxa, and if its any consolation, x.org now has a very reliable safe start mode-thing
[22:49] <Aquina> eeheh you can boot from DVD no matter what's on your HDD's
[22:49] <rdw200169> naxa, so if xorg.conf fails, it goes to safe mode, which is just the vesa driver
[22:49] <eeheh> I uninstalled ubuntu, now. Tru WIndows secure mode, how do I remove Dual boot?
[22:49] <eeheh> So it becomes Normal.
[22:49] <Aquina> Go into your BIOS and select a CD-ROM for boot. Or try pressing F11 or something like that on system startup
[22:49] <erUSUL> eeheh: fixmbr from recovery mode of windows
[22:49] <eeheh> mbr is what?
[22:49] <linux_guy> master boot record
[22:49] <Aquina> maste boot record
[22:50] <flint_> eeheh, if you want to go back to a total window boot fdisk /fixmbr
[22:50] <erUSUL> eeheh: ask in ##windows for more info
[22:50] <linux_guy> GL in that chan
[22:50] <eeheh> Is that the one thing that holding the somewhat looking corrupted dual boot?
[22:50] <naxa> rdw200169, oh, i think i've seen that a couple of times. i also saw a few times when even that wasn't enough safe. poor xorg. :)
[22:50] <Aquina> eeheh I think though you've got more probs than mbr.
[22:50] <naxa> rdw200169, ok, i'll restart now. bye.
[22:50] <ccchatzilla> How can I display the result of a terminal command straight in the Gnome Panel?
[22:50] <linux_guy> eeheh, get that pdf for reference and dont forget to use the forum
[22:51] <rdw200169> ccchatzilla, hmm,,, that's an interesting question, you could try something with libnotify + python
[22:51] <Stelbent> anyone awake?
[22:51] <Aquina> nos, eeheh the mbr is a tiny part on your hdd which takes care of operating system boot in some way. Use fasbot or metager or cuil to search for an article discussin' that matter.
[22:51] <flint_> eeheh, Does the windows partition work when you hit <esc> and select the windows boot selection?
[22:51]  * Aquina ,Stelbent! :-) 
[22:52] <rdw200169> ccchatzilla, libnotify has a dbus instance you can use to make popups show up on you display
[22:52] <gidna> Warning: Screen isn't composited. Please run compiz (-fusion) or another compositing manager.
[22:52] <eeheh> When I choose to boot Windows, it loads, I get to login screen, I login, la la la, sloooow loading, I get to my detoskop with the icons. And then it just loads nearly to nothing, Only allowing me to click on icons and move my mouse.
[22:52] <gidna> I can't run awn
[22:52] <gidna> what have I to do?
[22:52] <rdw200169> ccchatzilla, like that annoying 'your system has updates available' popup
[22:52] <Stelbent> I made som updates yesterday, now I cant get my wifi working. Runing Intrepid Ibex on Acer aspire one
[22:52] <eeheh> Sometimes I don\t even get as far as it starts loading from when I login.
[22:53] <flint_> eeheh, can you boot your windows CD?
[22:53] <Aquina> eeheh this i probably a M$ Windows spec. problem then.
[22:53] <eeheh> Here\s the big big problem. I lost my windows cd.
[22:53] <eeheh> He he he.
[22:53] <Aquina> *lol*
[22:53] <Stelbent>  wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
[22:53] <Thokas> I can see that being a bit of a problem, yeah.
[22:53] <Stelbent> anyone?
[22:53] <Aquina> Ok I'm a bad girl -- I know"
[22:54] <Aquina> What's up Stelbent?
[22:54] <carpii> can anyone recommend a good color picker for web developers?
[22:54] <linux_guy> eeheh, why keep windows anyway?
[22:54] <Aquina> How's the weather in Norway?
[22:54] <flint_> eeheh, what version did you "loose"?
[22:54] <Stelbent> Aquina, not too good :)
[22:54] <Aquina> :-)
[22:54] <Myrtti> !offtopic | Aquina
[22:54] <Stelbent> Aquina, -20c and lots of snow =)
[22:54] <Andry_Afk> hi guys, I'm looking for a tool to put the live CD image into a USB Drive.  cany anybody help me?
[22:55] <kapace_laptop> hello, is there a way to list all display drivers installed?
[22:55] <Aquina> Uiii...
[22:55] <eeheh> Because I wanna play Counter/strike, be able to do my VB homework I get from school. Play alot of steam games, and use windows movie maker.
[22:55] <rdw200169> kapace_laptop,  dpkg --get-selections xserver-xorg-video*
[22:55] <tim_> hi. i want to back up my MBR. which device should i use?
[22:55] <kapace_laptop> rdw200169, thanks
[22:55] <flint_> eeheh, again, what windows version did you "loose"?
[22:56] <sigjuice> durt: according to /var/log/Xorg.0.log, ATI Rage 128 Mobility M3 LF (AGP) (ChipID = 0x4c46)
[22:56] <Aquina> hm. Nevertheless it seams like you Windows OS is corrupt. This is not a Ubuntu or bootloader problem as I already mentioned, eeheh.
[22:56] <Royall> what drive is /dev/sg0, usually?
[22:56] <flint_> eeheh, what version of the CD did you have?
[22:56] <rdw200169> kapace_laptop, that doesn't get the restricted drivers, though, like nvidia and fglrx
[22:56] <eeheh> An very old Dell cd with Windows XP Service pack 1.
[22:56] <eeheh> 32 bit version.
[22:56] <kapace_laptop> rdw200169, but i can change the command for that?
[22:56] <flint_> eeheh, go download a new version and burn it to a cd
[22:56] <tim_> nevermind.
[22:57] <eeheh> Is the windows cd required to fix the damned mbr?
[22:57] <kapace_laptop> eeheh, no
[22:57] <kapace_laptop> you can find the recovery console somewhere from microsoft
[22:57] <Andry_Afk> I do not have a cd rom drive
[22:57] <maco> eeheh: if "fix" means you want to reinstall windows' boot loader
[22:57] <durt> sigjuice: sorry got caught up helping someone else. Also sorry I've never touched an ATI card
[22:57] <rdw200169> kapace_laptop, yeah, here's the one for nvidia: dpkg --get-selections nvidia*
[22:57] <Andry_Afk> so I cant use a real cd
[22:57] <flint_> eeheh, the windows cd is required to fix your windows xp. It will also fix the mbr as part of the bargan.
[22:57] <icui2i> can anyone help me with how to get back the lower panel, where I can see my programs when minimized? as well how many desktops that are available.. I accedently deleted the panel...
[22:57] <kapace_laptop> rdw200169, yeah, thats what i was thinking
[22:57] <kapace_laptop> thanks
[22:57] <Andry_Afk> I need an external drive, such as a USB drive
[22:57] <maco> icui2i: just add a new panel and add those applets to it\
[22:58] <naxa> rdw200169, i'm back....... sorry for being late, i just played a bit with tux racer :)
[22:58] <maco> icui2i: if you right click the top panel itll let you add a new one
[22:58] <rdw200169> naxa, so it works?
[22:58] <naxa> rdw200169, yeah, it's hell slow, but it works. :)
[22:58] <flint_> macd_, Hou are you doing?
[22:58] <naxa> rdw200169, tux racer is my glxgears
[22:58] <rdw200169> naxa, well, thats what you get from a Rage 128 ;)
[22:58] <flint_> mac /Hou/How/
[22:58] <naxa> rdw200169, i think it's actually more interesting. :)
[22:58] <naxa> rdw200169, yeah :)
[22:59] <alexxoid> hi guys, does anybody have been setuped a voxware metasound decoder?
[22:59] <icui2i> maco: but it's not the same as the one when I first installed ubuntu..
[22:59] <naxa> rdw200169, i actually has an integrated graphics card. can i found out what's that, with this ati still in operation (eg. right now)?
[22:59] <maco> icui2i: you can make it the same
[22:59] <icui2i> maco: still miss the desktop area
[22:59] <maco> icui2i: if you right click it you can add that :P
[22:59] <rdw200169> naxa, yeah, you can actually use both w/different monitors, etc... but that requires a more advance xorg.conf config... not *impossible* ;)
[23:00]  * linux_guy downloads tuxracer out of curiosity
[23:00] <naxa> rdw200169, i installed ati in the agp slot 'couse i tried to install osx (experimentally) and it said that it needs an ati card. :)
[23:00] <maco> icui2i: im not in gnome right now, but there are widgets you can add to that panel for Display Desktop, Window Picker, Workspace Switcher, and Trash
[23:00] <zawazawa> is anyone here using irssi?
[23:00] <icui2i> maco: what kind of applets do I choose to do that?
[23:00] <eeheh> Right now, I don\t want to format my windows, i\m only intrested in fixing the mbr. I.e removing the Dual boot that ubuntu asked if I wanted to create when I installed ubuntu for the first time.
[23:00] <erUSUL> zawazawa: me
[23:00] <naxa> rdw200169, I see. :) but where can i see the type of the card? lspci's info doesn't showd me any sense (even if it was actually)
[23:00] <maco> icui2i: just look through the list. the names should be similar to the names i said
[23:00] <CyberGab1er> zawazawa: Yes, why
[23:00] <linux_guy> eeheh, you're probably going to have to reinstall the OS
[23:00] <btQuark> does anyone know how i can show the passwords in the gnome password manager?
 how do I connect my Windows machine to Ubuntu?
 Imaginativeone, install samba, read documentation
[23:01] <uplink> anyone uses apt-build??
[23:01] <zawazawa> how do I see the list of channels, I'm new to IRC and this client
[23:01] <icui2i> maco: will try =) thank you =)
[23:01] <linux_guy> and quit getting virus'
[23:01] <btQuark> i've tried to click on show password but it does not show anything
[23:01] <erUSUL> eeheh: we already told you how. boot with a windows cd into recovery mode and run « fixmbr »
[23:01] <rdw200169> naxa, its very likely that /var/log/Xorg.0.log specifies the video cards it found
[23:01] <Imaginativeone> zawa: which client?
[23:01] <erUSUL> eeheh: for more details as in ##windows
[23:01] <linux_guy> erUSUL, he has no cd
[23:01] <zawazawa> irssi
[23:01] <Imaginativeone> ah
[23:01] <eeheh> I don\t have any windows cd at all. I lost it.
[23:01] <maco> eeheh: dont need to get rid of GRUB to get rid of the dual boot...
[23:01] <Imaginativeone> can you use /list ?
[23:01] <zawazawa> it doesn't seem to do anything
[23:02] <nightrid3r> do i need special software to mount mdf (alcohol120%) files ?
[23:02] <maco> eeheh: bah Brunellus isn't on, but his brother's laptop uses GRUB with Windows, just because the kid likes GRUB but not ubuntu
[23:02] <machine> Hello. Is anyone familiar with Blender and/or 3ds?
[23:02] <naxa> rdw200169, well, this is quite long... can you help me with any specific about what am i searching?
[23:03] <naxa> rdw200169, i've found ati couse it's "rage".. dunno what to search for :)
[23:03] <rdw200169> naxa, it should specify that in one of the (II) lines
[23:03] <jway> when at a login screen in command prompt, saying "machinename login: " and I don
[23:03] <rdw200169> naxa, like, "Informational"
[23:03] <HLM11> im having troubles deleting a folder on my desktop
[23:03] <jway> 't want to login, but shutdown the machine - how do I do tha
[23:03] <jway> t
[23:03] <erUSUL> zawazawa: /list on the server window but that will overkill use the freenode alist service
[23:04] <erUSUL> zawazawa: will be*
[23:04] <mr_daniel> machine: you can find a #blender channel on the freenode server
[23:04] <douglasness> would the newest version of ubuntu run without being installed on the hard drive?  I need it to be able to remove data off a crashed hard drive?  Really important.  Please message me with answer.
[23:04] <machine> thanks mr_daniel :)
[23:04] <thebloggu> can someone tell me if is possible for me to tweak my theme not to look so big ? for example, in firefox my bookmarks bar height is maybe 20px and i like it small
[23:04] <mr_daniel> np
[23:05] <meoblast> hi
[23:05] <nightrid3r> douglasness yes it will
[23:05] <douglasness> thank you very much I will be sure to download it tonight thx
[23:05] <eeheh> I got a windows xp ISO file at my computer. Yay. Let's see what magic we can do here.
[23:05] <rdw200169> naxa, somewhere in your menu there may be an app that shows you a windows-ish layout of your hardware
[23:05] <meoblast> my dad and step mom decided they wanted Ubuntu on this slow machine and when i ran the live CD i had some wireless issues.... could some one assist me in finding the easiest way to set this wireless card up?
[23:05] <rdw200169> naxa, but i don't know, on 8.04 i installed a kde app for that b/c i couldn't find it
[23:05] <mr_daniel> nightrid3r: I am not sure if a fresh ubuntu installation is able to mount mdf files, but you can convert the mdf file into iso format and then mount the .iso http://ubuntuexperiences.wordpress.com/2006/12/13/mounting-mdf-images/
[23:06] <HLM11> need assistance with removing a non-empty folder on my desktop, please help
[23:06] <nightrid3r> oh cool
[23:06] <icui2i> maco: thank you..worked fine =)
[23:06] <rdw200169> naxa, try this: gnome-device-manager
[23:06] <mr_daniel> I think there are also tools to mount mdf files directly, but I dont how they are called
[23:06] <meoblast> strange.. lspci reported it to be a broadcom but Windows reports it to be a Linksys
[23:07] <vishnu> i was working with Full visual effects enabled. when i played video. it flickers so i changed to normal. then now i cannot enable the visual effects. pls help
[23:07] <rdw200169> meoblast, that's b/c linksys cards always use broadcom chipsets
[23:07] <Royall> Is it safe to delete the "Microsoft Windows XP Embedded" option from the GRUB menu.lst?
[23:07] <meoblast> vishnu: oh that's easy to fix..... open a terminal and type "compiz --replace"
[23:07] <zawazawa> erUSUL: thanks I'll have to read up on how to use that
[23:07] <gidna> Hi
[23:07] <meoblast> vishnu: sometimes with non-nVidia cards it will false report whether compiz can be started
[23:08] <TruthTaco> whats a "superspace"
[23:08] <rdw200169> naxa, yeah, i just installed that, its very good
[23:08] <meoblast> vishnu: if that doesnt work, X server must be restarted
[23:08] <gidna> I don't like awn so I removed it.. but I don't have anymore the classic bar at the bottom..
[23:08] <vishnu> meoblast: ok wait. i will test
[23:08] <meoblast> rdw200169: are there drivers for those or must i use ndiswrapper?
[23:08] <gidna> How can I reput it?
[23:08] <gidna> that one with the show desktop..
[23:08] <eeheh> I copied the recovery tool over to the boot thingy, let\s see if it works. I will return later. Thanks and bye.
[23:09] <sak> hi
[23:09] <rdw200169> meoblast, it's iffy, depends on exactly what chipset you have
[23:10] <naxa> rdw200169, ah. sometimes one cannot understand, why aren't some compnents are installed by default.
[23:10] <vishnu> meoblast: i tried 'compiz --replace'. still cannot enable effects
[23:10] <meoblast> rdw200169: how can i find out.. i'm not good with WIndows and Ubuntu off live CD could take a while to boot on this machien (plus there's no network in ubuntu on here)
[23:10] <vishnu> meoblast: when i tried it says 'Desktop effects could not be enabled'
[23:11] <rdw200169> meoblast, do you have a 'restricted drivers available' icon whatzit in your taskbar?
[23:11] <meoblast> vishnu: pastebin me the terminal output
[23:11] <meoblast> rdw200169: no
[23:11] <rdw200169> naxa, yeah, i agree, a hardware profile app is very useful!
[23:11] <vishnu> meoblast: ok
[23:11] <meoblast> rdw200169: although there are nVidia drivers on this machine
[23:11] <meoblast> rdw200169: i mean an nVidia card
[23:12] <Andry_Afk>  my notebook doesnt have cdrom drive. anybody can tell me how to boot the livecd from a USB pendrive?
[23:12] <meoblast> Andry_Afk: one second i'll get you a link
[23:12] <HLM11> need help with removing a non-empty folder on my desktop
[23:12] <naxa> rdw200169, yeah. however, i can't see my other vga here... but there is an unknown device on the "host bridge". could it be that...?
[23:12] <sigjuice> durt: thanks for your help.  I tracked this to bug 284309 and fixed my problem.
[23:12] <Ebdomos> Quick question: I have made a 4.7 gb dvd image, and I need to transfer it via internet to one person. What is the fastest most reliable way of doing this? Torrent?
[23:13] <meoblast> Andry_Afk: https://help.ubuntu.com/community/Installation/FromUSBStick
[23:13] <rdw200169> naxa, it's possible, you may want to google your machine model w/ubuntu to see if its a kernel problem
[23:13] <naxa> yeah
[23:13] <HLM11> !files
[23:13] <vishnu> meoblast: http://pastebin.com/mc978ac4
[23:13] <rdw200169> naxa, you gotta admit, though: gnome-device-manager is pretty darn useful!
[23:14] <erUSUL> HLM11: you can not sdo it with the file manager?
[23:14] <HLM11> no
[23:14] <erUSUL> HLM11: error msg?
[23:14] <erUSUL> !details | HLM11
[23:14] <naxa> rdw200169, i admit it. :) it really is.
[23:14] <HLM11> only root has access to it and sudo + --ignore doesnt work
[23:14] <meoblast> vishnu: you have an Intel chip?
[23:14] <meoblast> vishnu: for your GPU?
[23:14] <erUSUL> HLM11: sudo rm -r folder/
[23:14] <HLM11> I was trying to install vmware server and I got the rpm and tried converting with alien
[23:14] <naxa> rdw200169, still wondering why wasn't enough space for 144 kb in that cd image.
[23:15] <vishnu> meoblast: no ATI
[23:15] <linux_guy> Can compiz get along with video files yet in 8.10?
[23:15] <meoblast> rdw200169: how would i find which chipset this this wireless device has in it from windows?
[23:15] <nsadmin> alien might convert the package but the insides are not guaranteed to work
[23:15] <HLM11> ok, its gone thanks
[23:15] <rdw200169> naxa, meh, who knows?  i'm sure there was a heated debate over removing it... but i don't feel like pouring through the launchpad to find out why
[23:15] <vishnu> meoblast: i have ATI chipset
[23:15] <meoblast> vishnu: well ATI and Intel use similar interfaces for drivers..... sadly... the only way to fix that is restart X as far as i know....
[23:16] <rdw200169> meoblast, well, you can use lspci or lsusb depending on how it's plugged in
[23:16] <meoblast> vishnu: in other words... save work... close programs..... Control + Alt + Backspace
[23:16] <naxa> rdw200169, linux people sometimes do very strange decisions. or at least very strange for me.
[23:16] <vishnu> meoblast: you mean restart the system
[23:16] <crdlb> linux_guy: the problem isn't compiz, it's your video driver, so the answer to that question depends on your video driver as it always has
[23:16] <meoblast> rdw200169: from windows?
[23:16] <erUSUL> rdw200169: lshw
[23:16] <rdw200169> erUSUL, thanks
[23:16] <meoblast> rdw200169: it would take a good 15 minutes to get back into the live cd
[23:16] <meoblast> rdw200169: and a good 10 to get back into windows
[23:16] <rdw200169> meoblast, ah, do you know what the model number of the card is?
[23:17] <JPSman> Hi
[23:17] <meoblast> rdw200169: yes i have it from System Info
[23:17] <rdw200169> meoblast, like "linksys wrt54g v.10" or something
[23:17] <meoblast> rdw200169: Linksys LNE100TX Fast Ethernet Adapter (LNE100TXv4)
[23:17] <naxa> rdw200169, i was once 'debating' about why should ubuntu has a better file open/save dialog box... but people didn't beleive me that users need thumbnails in a gtk filechooser. that's very weird for me.
[23:17] <rdw200169> meoblast, in this situation, the version number is very important, linksys likes to swap chipsets a lot
[23:18] <crdlb> linux_guy: fglrx (the proprietary ATI driver) is the only driver that still has consistently broken video unless you use unaccelerated X11 playback
[23:18] <meoblast> rdw200169: was that the version number? if not where can i get it?
[23:18] <rdw200169> naxa, i have a bad habbit of customizing things endlessly, generally my ubuntu never ends up looking like the original :)
[23:18] <vishnu> meoblast: i am using Virtual Box. wil it affect the Visual effects
[23:18] <rdw200169> meoblast, the box it came in, or on a sticker on the actual card
[23:18] <meoblast> vishnu: shouldnt... i think that is just a known bug in non-nVidia cards
[23:19] <rdw200169> meoblast, but i don't think what you showed me is the wireless card, that's an ethernet adapter
[23:19] <meoblast> rdw200169: i dont know... and i don't think my dad would like me demolishing everything to get to the back of the machhine
[23:19] <naxa> rdw200169, really? can you give me some hints? i installed awn and some now logon themes but somehow i am allways lacking something in the end... can you give me hints?
[23:19] <naxa> now=new :)
[23:19] <rdw200169> naxa, what do you want to do?
[23:19] <vishnu> meoblast: any patches available..
[23:19] <naxa> rdw200169, just random cool stuff what you see on screenshots but don't know how to get
[23:19] <naxa> rdw200169, this is plan A
[23:20] <meoblast> vishnu: maybe typing "killall metacity" and then "compiz" would work
[23:20] <wers> is there a way to have both wicd and nm installed? :D
[23:20] <rdw200169> naxa, well, with compiz you can use a replacement window manager called emerald to make pretty windows
[23:20] <meoblast> vishnu: metacity might be locking it out
[23:20] <meoblast> vishnu: be aware that your window title bars will go away after killing metacity
[23:20] <meoblast> brb gtg... i'll be back soon
[23:20] <rdw200169> naxa, i was never a fan of awn (it crashed a lot at the time) so i use cairo-dock
[23:20] <vishnu> meoblast: ok
[23:20] <rdw200169> naxa, that, and a lot of people really like conky
[23:20] <nectar> hey guys i just installed frostwire it was installed well. but when i start it it always says starting the connection is there anyone  who can help me about that?
[23:21] <vishnu> meoblast: will it close any windows ?
[23:21] <rdw200169> naxa, there's also gscreenlets that puts interesting informational things on your desktop
[23:21] <Macer> just bought an ice genie for my k45
[23:21] <Macer> it's really starting to turn into a sickness :)
[23:21] <alien> guys, I have a long text file with <a href=http://www.malwaredomainlist.com/mdl.php?search=doc9c.cn>doc9c.cn</a><br><a href=http://ww how do I extract all domains and put them into another file in ubuntu CLI ?
[23:21] <jrib> alien: use grep (hint: -o)
[23:21] <rdw200169> naxa, for really simple system modification, ubuntu-tweak is really popular
[23:22] <gidna> http://www.youtube.com/watch?v=VLjh8nOTlwo
[23:22] <gidna> How can i put the clock like that one ?
[23:22] <alien> jrib, I know what grep and sed is for, but after reading the manual for couple of hours I give up :)
[23:22] <naxa> rdw200169, thanks! can you tell me what have you done on your desktop (if it's too much, key elements, or "recently)?
[23:22] <mikejet> Is there a way to tweak the temperature that the hardware shuts down at?
[23:22] <jrib> alien: does my hint help?
[23:22] <rdw200169> naxa, there's also ultamatix for getting restricted stuff
[23:23] <alien> let me see
[23:23] <elementz> find
[23:23] <rdw200169> naxa, mostly, i run dual-monitor with a bunch of minor gconf changes to make things act the way i like
[23:23] <alien> jrib, so what optio0n do I put here?
[23:23] <jrib> alien: huh? -o is the option
[23:24] <ca_rlo> hello
[23:24] <eater91> Hi -
[23:25] <alien> jrib, I didnt get your point
[23:25] <jrib> alien: read what the -o option does in grep
[23:25] <alien> jrib, I read it many time
[23:25] <alien> does not help
[23:25] <alien> how to describe that I want domain name after =
[23:25] <alien> ?
[23:25] <jrib> alien: so what does it do?
[23:26] <eater91> Hi - running Intrepid on a laptop, how can I control suspend and resume events? The scripts in /etc/acpi/suspend.d and resume.d do not seem to be executing.
[23:27] <nectar> eater91: do you have an packardbell laptop?
[23:27] <eater91> nectar: no, Lenovo
[23:27] <nectar> iam having same problems too but i could not find a solution yet
[23:27] <eater91> suspend and resume work fine, but I want to customize them
[23:28] <ca_rlo> how can I let my Ubuntu more attractive?
[23:28] <karan> lol
[23:28] <karan> get better themes
[23:28] <Thokas> gnome-look.org ?
[23:28] <ca_rlo> but
[23:29] <jrib> alien: still there?
[23:29] <naxa> rdw200169, i see. i gotta run out for a moment, will be back later! thanks for advices! :)
[23:29] <alien> jrib, yeah
[23:29] <ca_rlo> sometimes when I took same themes it teels me that I don't have the gtk theme
[23:30] <jrib> alien: looked up what -o does yet?
[23:30] <eldiabl0> yo yo
[23:30] <eldiabl0> wassup
[23:31] <nightrid3r> eldiabl0 taxes probably
[23:31] <eldiabl0> haha
[23:31] <eldiabl0> always
[23:32] <napsy> Hello. I've reinstalled my Ubuntu system. The installation did not recognise my encrypted /home partition so I leaved it untouched and proceed with the installation. Now the system is installed but I don't know how to configure it to use my encrypted home. Please help.
[23:32] <alien> jrib, yes
[23:32] <NFischer> napsy how did you encrypt it
[23:32] <jrib> alien: well, what does it do?
[23:32] <Thokas> How do I change my screen refresh rate to one that doesn't show up in the change screen resolution options?
[23:33] <napsy> NFischer: using the installer
[23:33] <alien> jrib, gives options
[23:33] <Astero1D> Hi everyone
[23:33] <Astero1D> Can someone recommend a decent rpg game (like WOW) for linux? please?
[23:33] <alien> sup
[23:33] <napsy> Astero1D: planeshift
[23:33] <nightrid3r> Astero1D freedriod
[23:34] <bonkit> Hi, I just enabled ufw and set default access to deny, but I can still connect to irc and use the web, why ?
[23:34] <rsista> I have a backup question.  I want to include Windows My documents directory (/media/disk/Documents and Settings) in my backup using tar while excluding the other stuff in /media.  Can "tar" do this?
[23:34] <NFischer> napsy "sudo cryptsetup luksOpen -device- -name-"
[23:34] <napsy> NFischer: ok I'll try
[23:34] <Macer> just bought an ice genie for my shuttle k45
[23:34] <Macer> heh
[23:35] <Macer> it's going to be a little silent beast
[23:35] <jrib> alien: alright whatever, I can't help you if you claim to read things and then don't.  Good luck
[23:35] <Macer> it already lost 50dB in fan noise from that disgusting stock psu it had
[23:35] <Redsoxie> MutK: You previously said your thongs are carving up your ass. May we suggest you undo the gender change ?
[23:36] <Macer> http://www.getashuttle.com/index.php?page=shop.browse&category_id=11&option=com_virtuemart&Itemid=75
[23:36] <yoyit2> hi i am trying to share my internet connection how do i set this up
[23:36] <Macer> hahaha! they are selling crt monitors for $1
[23:36] <jrib> Redsoxie: stop please.  stay on-topic
[23:37] <Redsoxie> jrib: I see many opposing monkeys. we eat those for breakfast :=)
[23:38] <NFischer> napsy you can also get gdecrypt (universe) for gui
[23:38] <yoyit2> hi i am trying to share my internet connection how do i set this up
[23:38] <alien> jrib, you dont get my point, trust me i read it, does not help, after reading it many times im not able to put syntax to extract domain names, because there is no option to do so easily
[23:38] <napsy> NFischer: when I enter my password I get Command failed: No key available with this passphrase.
[23:38] <nightrid3r> yoyit2 google for iptables
[23:38] <Redsoxie> echo "1" > /proc/sys/net/ipv4/ip_forward (make sure the file exists first)
[23:38] <napsy> NFischer: but when I execute luksDump it prints out some information
[23:38] <jrib> alien: I asked you to describe to me what the -o option does so that you can see it will be helpful.  Instead you gave me a nonsense answer
[23:38] <jesio> hello all
[23:39] <Redsoxie> $ file /proc/sys/net/ipv4/ip_forward
[23:39] <Redsoxie> /proc/sys/net/ipv4/ip_forward: empty
[23:39] <meoblast> i'm back
[23:39] <jrib> Redsoxie: do you have a question?
[23:40] <Habeeb> ????????? ??????
[23:40] <jesio> does anyone know how to activate the wifi on aspire one
[23:40] <meoblast> could someone help me figure out what wireless card i have in windows so i can find the right drivers for ubuntu?
[23:41] <Redsoxie> jrib: im top 6000 coder in the world, do you have a question ?
[23:41] <nsadmin> meoblast: if you don't find out here, there is #windows
[23:41] <meoblast> nsadmin: they probably wouldn't help if i told them i'm deleting windows
[23:42] <unop> Redsoxie, the device manager should give you that info.
[23:42] <nsadmin> Redsoxie: yeah... why are you here?
[23:42] <EruditeHermit> hey, can someone explain the difference between icedtea and openjdk?
[23:42] <unop> meoblast, , the device manager should give you that info.
[23:42] <nsadmin> meoblast: so domn't tell them that
[23:42] <Redsoxie> unop: i wasnt asking, re read the lines, np.
[23:42] <unop> Redsoxie, i'm sorry
[23:42] <meoblast> unop: where is the device manager?
[23:42] <Redsoxie> nsadmin: to help and improve
[23:42] <Redsoxie> unop. np at all
[23:42] <meoblast> unop: i'm not very windows fluent... i'm installing Ubuntu for someone
[23:42] <nsadmin> what os do you run?
[23:43] <unop> meoblast, under network adapters most probably
[23:43] <Redsoxie> Be well and be nice. signout by Gowd :=)
[23:43] <berat> Deniz Seki gozaltin da !!!!
[23:43] <meoblast> unop: i mean i don't know how to start device manager.. can't find it in this large All Programs menu
[23:44] <unop> meoblast, start -> run -> devmgmt.msc
[23:44] <nightrid3r> meoblast control panel >> system >> hardware >> devicemanager
[23:44] <nsadmin> meoblast: see if there's a control panel
[23:45] <meoblast> ok i have a Motorola Wireless PCI Adapter WPCI810G
[23:45] <illumin8> has anyone successfully installed the new nvidia drivers for linux (released on the 11th) in ubuntu 8.04?
[23:45] <unop> !wireless | meoblast
[23:45] <meoblast> does anyone know if that has Ubuntu drivers?
[23:45] <meoblast> unop: thanx
[23:46] <nightrid3r> meoblast google for wpci810g linux
[23:46]  * meoblast cries
[23:46] <meoblast> no Linux drivers
[23:46] <nightrid3r> meoblast then install ndiswrapper and use windows drivers
[23:47] <HOMEMADEJAM> hey everyone
[23:47] <nightrid3r> mmmmm HOMEMADEJAM
[23:47] <illumin8> grape or strawberry :)
[23:47] <GNUWorld> Sounds good to me
[23:47] <HOMEMADEJAM> Strawberry of course :)
[23:47] <illumin8> you rule, whats up :)
[23:47] <GNUWorld> okay i am listening them... only for Strawberry
[23:48] <HOMEMADEJAM> I am seeking for a little help if that is okay
[23:48] <illumin8> ask away.
[23:48] <rsista> Hello all..may be my question was lost in the thong discussion :-(  I repeat
[23:48] <GNUWorld> On with the question :D
[23:48] <rsista> I have a backup question.  I want to include Windows My documents directory (/media/disk/Documents and Settings) in my backup using tar while excluding the other stuff in /media.  Can "tar" do this?
[23:48] <rsista> (Thanks for listening)
[23:48] <nightrid3r> HOMEMADEJAM sorry no cooking help here, we are geeks
[23:48] <HOMEMADEJAM> I have a text file... and I want to display in in the terminal... highlighting any text 'homemadejam'
[23:48] <HOMEMADEJAM> I have used the grep command to do this
[23:49] <HOMEMADEJAM> Although, I can only get it to display only the lines that contain 'homemadejam'
[23:49] <HOMEMADEJAM> I need it to display the full text file, but still highlighting the 'homemadejam' part
[23:50] <HOMEMADEJAM> ...if that makes any sense :)
[23:50] <nsadmin> HOMEMADEJAM: that;s what grep does
[23:50] <jrib> HOMEMADEJAM: is there a reason you don't just use a text editor?  Please don't use enter as punctuation by the way
[23:50] <nsadmin> it prints only lines that match
[23:51] <HOMEMADEJAM> I still need it to print then lines that don't match too... and sorry about the enter thing :)
[23:51] <jrib> HOMEMADEJAM: and my question about a text editor?
[23:52] <HOMEMADEJAM> Oh sorry. Yeah, I am using an old server to paly around on... so it has no GUI
[23:52] <eater91> Is anyone here familiar with ACPI on Intrepid, and how to trigger specific events when a laptop wakes up?
[23:52] <zsquareplusc> and still you could use an editor ;-)
[23:52] <jrib> HOMEMADEJAM: ok, my question is still valid...
[23:52] <w3rd_> hey guys im trying to configure a lang pack and switch the language of my computer keyboard and the system it self... i followed the instructions http://ubuntuforums.org/showthread.php?t=172642
[23:52] <zsquareplusc> vim file, then /wordtohighlight
[23:53] <w3rd_> i was hoping someone could tell me what i did wrong
[23:53] <Animator> Hello people is there a way to auto mount my ntfs drives on startup so as i wont have to do it everytime i log in manually ?
[23:53] <HOMEMADEJAM> Okay, but all I need to do is to display a text file, highlighting a certian word, eg 'homemadejam'. I don't want to open it up in a text editor
[23:53] <jrib> Animator: install and run ntfs-config
[23:54] <zsquareplusc> w3rd_: you can choose the language when you log in. and the keyboard in system->prefs
[23:54] <jrib> HOMEMADEJAM: well you could do this in vi.  What do you need to do this for?
[23:54] <w3rd_>  zsquareplusc: i did that ... and it still loads english
[23:54] <eater91> HOMEMADEJAM: you can run "less yourtextfile" and then type /homemadejam
[23:54] <w3rd_> im not sure why
[23:55] <zsquareplusc> HOMEMADEJAM: what is your idea of "highlighting" when you dont want to use an editor? do you want to convert the file to HTML for example, in order to use colors?
[23:55] <w3rd_> the interface changes to an old version of gnome
[23:55] <HOMEMADEJAM> I'm just writing a script to view my Twitter feeds, and I am wanting to clearly see what I have posted, or who are sending me a reply
[23:55] <w3rd_> but the language hanst change
[23:55] <leonardo_> boa noite
[23:56] <jrib> HOMEMADEJAM: you want your script to color/highlight the output?
[23:56] <leonardo_> boa noite
[23:57] <HOMEMADEJAM> Yeah pretty much. but to only highlight the words that I have chosen
[23:58] <zsquareplusc> HOMEMADEJAM: if its just for lokking at in the terminal, then why not less and then type /word
[23:58] <HLM11> I need help with my keyboard layout... or something along those lines
[23:58] <jrib> HLM11: just ask the question
[23:58] <jrib> HOMEMADEJAM: well one way would be to just use ansi color codes yourself in your script
[23:59] <benpicco> Hi, how to make a screenshot of a fullscreen OpenGL Game?
[23:59] <HLM11> I am playing a game and need to use the command 'toggleconsole' which is bound to ~ and I need to press a key after that, is there a way to change that?
[23:59] <EruditeHermit> hi can anyone explain the differences between icedtea, cacao and openjdk versions of java?
[23:59] <kitche> benpicco: depends on the game some have their own screenshot method
[23:59] <naxa> rdw200169, i am back
[23:59] <HOMEMADEJAM> How would you do something like that? :S