[00:00]  * jahor is sad because he got no reply to his question ;(
[00:01] <friartuck> jahor documentation?
[00:03] <olcafo> jmarsden: I've actaully looked into that quite extensively. At the end of day this doesn't eliminate the need to do a full ntbackup of exchange to tape... which is what we are trying to get away from.
[00:03] <friartuck> olcafo jmarsden bacula? dunno much about it. reading about it today in fact.
[00:04] <jmarsden> friartuck: Unless it has an Exchange-specific agent it won't be able to back up an Exchange database correctly.
[00:04] <olcafo> bacula on Exchange just doesn't cut it.
[00:05] <olcafo> I think bacula has a development agent, but I don't want to mess with a perfectly good working exchange database.
[00:05] <olcafo> If only I could move them over to a Linux solution...
[00:06] <jmarsden> jahor: There is no such "lintian for your server configuration" tool that I know of, perhaps because it would have to know about every config file format in the Universe to be able to do that...
[00:06] <friartuck> olcafo just googled a few but it came up with problem reports :O. ubuntu pushes bacula in the official docs. maybe they'll get it right soon.
[00:07] <olcafo> well, I'm off. Bye.
[00:42] <jahor> jmarsden: i do not mean validate everything ... just like lintian check only for special cases i define
[00:43] <jahor> jmarsden: my plan is to use it to check other machines if i find something bad on one of all servers - just like lintian is used
[00:43] <jahor> jmarsden: but when it does not exists there is room for me to make it, rigt ;o)
[00:44] <jmarsden> jahor: lintian is generally used to check .debs during the work of creating and modifying packages.... not per server?
[00:44] <jahor> jmarsden: lintian is for packages ... the tools i search for could be names for example syslint
[00:45] <jmarsden> jahor: Sure, you can create something.  Are you thinking of a very general server config check tool like cfengine, then?
[00:46] <jmarsden> http://www.cfengine.org/
[00:46] <jahor> jmarsden: what i know about cfengine, func, bcfg2 and others is to create some change based on some templates or other sources
[00:47] <jmarsden> cfengine can be told to just tell you what is different (wrong), it does not have to fix it if you do not tell it to do so.
[00:48] <jmarsden> And yes, you'd have to create your own ruleset... that is "the special cases you define" ... :)
[00:48] <jahor> jmarsden: then it could be the right tool for this purpose, i could check the docs for cfengine
[00:55] <jahor> jmarsden: the cfengine documentation scares me on the first sight ;o)
[00:56] <jmarsden> It is intended for large scale server setups and experienced server admins... but it is a powerful tool if you take the time to learn it.
[00:57] <jmarsden> I've only ever played with it myself -- I've not used it in production.
[01:08] <jahor> jmarsden: but thanks ... i just got idea to combine func and nagios like checks
[02:32] <comz_> hello all.. i'm trying to solve this problem: i need to configure sendmail (or postfix or something else) to forward all mail that will point to this server to one other email on other server .. could somebody help me please ?
[02:34] <comz_> please, anybody !
[02:36] <Damm> comz_, that's more dns then the latter.
[02:37] <Damm> you can configure sendmail/postfix/exim4 to accept and relay for a domain, but if the DNS records don't tell it to do it also... it won't.
[02:38] <comz_> Damm: it is configured .. i need to forwart all emails to any account (ac1@dom1.com, ac2@dom1.com, ac1@dom2.com) to one email (nick@example.com)
[02:39] <Damm> comz_, then you need to setup a user mapping
[02:39] <Damm> virtual user mapping or user mapping
[02:39] <comz_> Damm: virtual i think .. how it is done ?
[02:39] <comz_> because no of the account currently exists on the server
[02:39] <Damm> however this isn't #sendmail or other said.  So what package did you install on Ubuntu Server?
[02:40] <lamont> man virtual
[02:40] <comz_> lamont: no entry for virtual
[02:41] <comz_> Damm: i'll try it there .. thanks
[02:41] <lamont> comz_: after you install postfix there is
[02:42] <comz_> lamont: thanks
[10:49] <mmt_> Could somebody tell me how to configure my routers' NAT settings so that I could access my local server with my global ip?
[10:50] <mmt_> from within the localnetwork that is
[10:58] <twb> Is the router running Ubuntu?
[11:02] <mmt_> No it doesn't.
[11:02] <twb> Then no.
[11:02] <mmt_> Could you point me to a channel where I could get some help?
[11:04] <twb> mmt_: that depends on what OS your router is running.
[11:04] <twb> e.g. #openwrt if it runs OpenWRT.
[11:04] <mmt_> It's a ZyXEL P-660HW-D1
[11:05] <mmt_> running the firmware that came with it.
[14:13] <goksu> hello I need help on installing ubuntu on HP Prolient ml350 G5
[14:14] <goksu> the installation goes just fine from ubuntu-server-64.iso. but I can not boot after install. ml350 hangs after reboot saying "attempting Boot from hard drive c:".
[14:14] <goksu> first time I try this. so it could be something about the ml350
[14:16] <goksu> is irc working fine? first time since 1998 I have logged on.
[14:19] <Nicke_> it's working fine yes :)  But..
[14:19] <Nicke_> !weekend
[14:19] <goksu> ok thank you. I'll wait.
[14:20] <goksu> oh the good old days. :) university life.
[15:21] <ivoks_> http://www.sun.com/servers/index.jsp?tab=0
[15:21] <ivoks_> Sun SPARC Enterprise T5440 Server
[15:21] <ivoks_> Sun SPARC Enterprise T5440 Server
[15:21] <ivoks_> From $5,179,500
[15:21] <ivoks_> huh? :)
[16:08] <andol> ivoks_: Seems like they have corrected it now, or are they still trying to give you that price? :)
[16:10] <ivoks_> still the same :)
[16:11]  * andol sees "From $51,795"
[16:12] <ivoks_> heh
[16:15] <ivoks_> how about M3000?
[16:15] <ivoks_> From $14,795
[16:16] <andol> yes, that's the same.
[16:16] <ivoks_> T5120 from $1,279,500
[16:16] <ivoks_> X4450 From $1,499,500
[16:16] <ivoks_> etc :)
[16:17] <andol> T5120: "From $12,795", X4450: "From $14,995"
[16:17] <andol> Well, if nothing else, there is a pattern...
[16:18] <ivoks> probably taxes for non-EU countries :D
[16:19] <ivoks> take care
[16:19] <andol> you too
[16:19] <ivoks_> lol... i have two IRC at the same time :)
[16:37] <andrer> anyone know a way to re-scan for iscsi targets without restarting iscsi? (I already have some luns mapped on a NAS device... if I do /etc/init.d/iscsi restart the new disks will show up, but I don't want to restart iscsi as I already have some disks mapped)
[19:40] <lantay77> why wont my server show all of my 540mb of ram? http://paste.ubuntu.com/139725/
[19:41] <lantay77> 2.6.28.3 is my kernel
[19:42] <friartuck> lantay77 try: more /proc/meminfo
[19:42] <lantay77> that shows more info
[19:42] <lantay77> is some of it reserved by the kernel or something?
[19:43] <friartuck> lantay77 is the first line, MemTotal correct?
[19:43] <lantay77> yes
[19:43] <friartuck> lantay77 dunno why, my box shows different numbers also.
[19:44] <lantay77> http://paste.ubuntu.com/139727/
[19:44] <lantay77> thats what i got
[19:44] <friartuck> lantay77 how about top? my top shows the same as /proc/meminfo
[19:45] <lantay77> top shows the same as MemTotal
[19:46] <friartuck> hmm, dunno why free shows diff.
[19:46] <jkakar> I'm playing around with Eucalyptus in Jaunty Server (beta).
[19:46] <jkakar> I've got the cluster running with a node registered.
[19:47] <jkakar> I've created a KVM image with ubuntu-vm-builder.
[19:47] <jkakar> Now I'm blocked on using ec2-bundle-image to turn the KVM image into something I can use with Eucalyptus.
[19:48] <jkakar> Are there any instructions describing the process?
[21:28] <Rafael> anybody has experience with ebox and samba
[23:00] <dosno> Anyone running the 9.04 beta ?
[23:09] <Begs> hey, how do you make ubuntu refuse all connections that didnt originate from the local network
[23:10] <Deeps> iptables -I INPUt -s ! localnet/mask -j REJECT ?
[23:11] <Deeps> replacing localnet/mask accordingly, and INPUt with INPUT
[23:49] <Begs_> Deeps: thanks