=== foxbuntu is now known as orudie_thefaggot === orudie_thefaggot is now known as foxbuntu [01:40] I cannot get my irblaster to work. I have 2 PVR 250's (one with remote) and a serial ir blaster from irblaster.info [01:40] The PVR250 "haupauge tv card" remote works fine, but when I select an irblaster neither one works [01:40] I tried the instructions in the install pdf, but same result [01:51] I am tyring to install mythbuntu and when i click the install icon it opens the editor to edit the install icon. [01:51] i tried running "ubuquity mythbuntu-ui" from the command line and also get an error. [02:19] bicchi, from a like disk? [02:20] the command mythbuntu's UI overrides GTK if you have ubiquity-frontend-mythbuntu [02:32] Trying everything to get my serial irblaster to work. [02:33] Anyone familiar with serial irblaster from irblaster.info? (using a PVR250 remote also, got that working) [02:33] getting device doesn't support sending on irsend command [02:42] so you just need to run the command "ubiquity" [02:42] MythbuntuGuest90, start out with a digital camera [02:42] see if you are seeing anything sent with it [02:54] Will it still send codes even with "hardware doesn't support sending? " [02:59] no [02:59] that means you need to add an argument likely [02:59] for the device and explicitly say /dev/lirc0 [02:59] or similar [03:02] where would I put that? [03:03] according to the forums it should be /dev/lircd or /dev/lircd1 [03:04] i dont know off hand, you might be better making a forum post tbh === gbutters_work is now known as gbutters [05:10] i am setting up mythbuntu for the first time and when I get the part of configuring the backend I get a black screen and nothing else happens. [05:10] This is after I run the mythfilldatabase. [05:13] In other words, I do not see the "MythTV Backend Setup" and all I get is a black screen that I have to press Esc to go back to the Desktop [05:13] no letters, and nothing else gets displayed. just a black screen. [05:42] bicchi, radeon? [05:42] there is an open bug if so [05:42] bug 341898 [05:42] bicchi, ^ [05:42] Bug 341898 in mythtv "MythTV Frontend does not work with RADEON DRI" [Unknown, Invalid] http://www.launchpad.net/bugs/341898 [05:42] superm1: yes radeon [05:43] bicchi, follow the workaround near the bottom in the comments then [05:43] with the env variable [05:43] or disable dri [05:49] superm1: so the solution is to do enter this on a terminal: XLIB_SKIP_ARGB_VISUALS="1" mythfrontend [05:49] but my problem is with the backend. [05:53] bicchi, for mythtv-setup, do the same thing [05:53] XLIB_SKIP_ARGB_VISUALS="1" mythtv-setup [05:53] or disable DRI [05:57] doing the XLIB_SKIP_ARGB_VISUALS="1" mythtv-setup [05:57] i get input/output error message [05:57] perhaps disabling DRI but do not know how to do that. [09:13] moin moin, wird hier deutsch gesprochen? [12:26] hi [12:26] i have tried to install mythbuntu 9.04 on a pc with an ati card [12:27] and when using using the open source drivers i got blank UI on the mythbackend setup app [12:28] i.e. i got an blank rectangle at first, and than what it seemed like a list of devices [12:28] also blank [12:53] !help [12:53] !help For a complete list of my knowledge visit: http://www.baablogic.net/Zinn.cgi Other available commands: !status, !about, !bug [bug_number]. [12:53] !help For [12:53] !help For For a complete list of my knowledge visit: http://www.baablogic.net/Zinn.cgi Other available commands: !status, !about, !bug [bug_number]. [14:48] I have a an ATI Radeon and I am getting hit by this bug. https://bugs.launchpad.net/ubuntu/+source/mythtv/+bug/341898 [14:48] I tried doing the "XLIB_SKIP_ARGB_VISUALS="1" mythtv-setup" and still have the black box during seting up the backend. [14:49] i even tried putting the "Option Dri off" to my xorg and still no go. [16:00] Hi all, does any one of a PPA with a recent working version of Myth Vodka in it [16:03] Has anyone gotten USB-UIRT to work with jaunty yet? I've gotten transmit to work by commenting out the repeat count and manually sending repeats in the channel change script, but I haven't gotten rx to work.. if you cat ttyUSB0 or use mode2 you get output, but lircd doesn't seem to decode it and irrecord throws errors with usb_uirt_raw and usb_uirt2, and learns wacky codes with uirt2 (which doen't work with lircd either). [16:04] The problems with the driver reported here (http://www.mythtv.org/wiki/USB-UIRT) seem to have been fixed, so I'm scratching my head. [16:05] MythbuntuGuest91, no [16:07] is it just not stable enought at the momment then ? [16:08] It's...replaced. Although I don't have a PPA with Mythfeed in it yet either [16:09] IIRC, the devs of mythvodka decided to do all work on MythTV .22 [16:09] and I don't run .22, so I stopped hosting it [16:11] ah right. So basicly I will have to wait untill .22 or run trunk. [16:12] well it looks to me as dev on mythvodka has stopped [16:12] back in Feb [16:12] either it was renamed to Mythfeed, or it was forked and mythfeed is the result of that [16:13] either way I think mythvodka is done [16:13] it certianlly seems to have every one talking about it, probably because of the name! [16:14] although Hulu & iPlayer integration would be good. [16:14] thanks for the info. [16:14] well, like I said Mythfeed (previously mythvodka (previously mythstreams)) has hulu support [16:14] I just need to get it packaged [16:15] i'm not sure about iplayer support though, I'm in the US so it doesn't really affect me [16:16] unless you have some where to bounce the traffic off. I am the UK so its kind of the oposite sitution for me. [16:17] yep [16:17] are you following the mythvodka thread on the forums? [16:17] IIRC, they are talking about the iplayer support right now [16:18] http://ubuntuforums.org/showthread.php?t=1006069&page=33 [16:19] thanks [16:20] np [17:46] how do you deal with an alternate prefix in mythfeed? [17:56] np [18:20] anyone ever had a problem with their HDTV displaying a blank screen as soon as X starts? [18:20] Does anyone know how do you restart jaunty to use a new kernel? "shutdown now -r" will reboot to the same kernel.. (I grant that is quicker, but I'd like to try some kernel upgrades..) My workaround now is to "shutdown now -P" then call someone located physically near the machine and having them press the power button, not ideal... [18:23] nevermind, I think I found the bug report https://bugs.launchpad.net/ubuntu/+source/kexec-tools/+bug/251242 [18:24] sorry, false unalarm.. I don't have kexec-tools installed... [18:30] bah! correct myself again, 251242 is the bug I ran into. It appears kexec-tools is only on some of my jaunty machines, but not the mythbuntu CD installed ones... it's only on some machines that I upgraded to jaunty. [20:08] does anyone use mythfeed with trunk? [20:29] hi everyone [20:29] right now I am converting my ubuntu 9.04 64-bit setup to mythbuntu [20:29] :D [20:30] ssssslllllllooooowwwww download though [20:43] mattwj2002: the key is to find a fast mirror nearby.. if you use the ubuntu default mirror finding it doesn't send you to the fastest mirror, just one in your country. [20:49] it is okay [20:49] :) [21:12] how long does it usually take for the mirrors to cool off? [22:11] mattwj2002, just depends, the first few days after a release are the worst, it tapers off pretty quickly after that [22:12] nice :) [22:49] does something like the aeonproject exist for mythtv? [22:50] gumpert345: no [22:51] thats sad [22:51] thx for the info though