| superm1 | mac9416, that means you need to associate the card with a data source still | 00:09 |
|---|---|---|
| superm1 | (usually) | 00:09 |
| mac9416 | superm1, how do I go about that? | 00:27 |
| map7 | I'm getting 'Cannot login to database?' from my remote machine can someone help me? | 02:21 |
| map7 | I've changed my backend & master backend IP address to my actual IP address instead of localhost | 02:22 |
| map7 | & entered in a security pin | 02:23 |
| map7 | I've enabled mysql as a service | 02:25 |
| map7 | Found it, I had to remark out the 'bind-address=127.0.0.1' in my /etc/mysql/my.cnf file | 02:27 |
| map7 | Why doesn't mythbuntu-control-center do this? | 02:27 |
| nuSharper | hi there! i just finished installing Mythbuntu. during install i had both my monitor and my TV connected (via S-Video). once the instaltion ended and the PC rebooted, the graphics card can only see the TV. the VGA output isnt displayed on Nvidia-Settings. how can i output video to my VGA monitor? | 04:21 |
| Shadow__X | what video card do you have | 04:23 |
| nuSharper | fx5500 | 04:23 |
| Shadow__X | run nvidia-settings | 04:24 |
| nuSharper | during install, i used the monitor. after the reboot, monitor went into stand-by. | 04:24 |
| nuSharper | i have. nvidia-settings only shows one available output: TV-Out | 04:24 |
| nuSharper | i wonder if i have to re-install the distro with the S-Video cable off... :-\ | 04:26 |
| Shadow__X | no your issue isnt with the distro is setting up the video card | 04:26 |
| nuSharper | i know. | 04:26 |
| nuSharper | what i meant was, maybe, if i re-install with the cable off, the auto-setup will keep me on the VGA output. | 04:27 |
| Shadow__X | in nvidia-settings under x server display config it only has one displayer there | 04:27 |
| nuSharper | yep. it says "TV-0". | 04:28 |
| nuSharper | i've tried "Detect Displays". no diff. | 04:28 |
| Shadow__X | alright i have to leave for a bit but look into nvidia-settings and your video card | 04:28 |
| Shadow__X | that will give you the answer or someone else | 04:28 |
| nuSharper | i guess i'll re-install it... | 04:29 |
| nuSharper | thx, anyway. | 04:29 |
| Shadow__X | yeah i mean i would suggest fixing it and not just reinstalling | 04:30 |
| nuSharper | i know. but i've been trying it for the last hour... all the obvious dialog-boxes have had no effect. | 04:30 |
| nuSharper | maybe if i uninstall the Nvidia drivers and re-install them... | 04:31 |
| Technophil1 | Yep good idea and ensure system is up to date. | 04:48 |
| nuSharper | didnt work. i started the re-install. just noticed sth... the install has a dilog that asks whether i wanna use "Open" or "Proprietary" drivers. the same dialog asks if i want to "Enable TV-Out". during the previous install i chose "Enable". that's probably where the mess happened. i'm re-instaling with the S-Video cable off and the TV-Out option disabled. let's see. | 04:52 |
| Technophil1 | yes enable | 04:55 |
| Technophil1 | Woops, use propriatary | 04:56 |
| Technophil1 | can enable later | 04:56 |
| nuSharper | thta's my plan. enabling it later. | 04:56 |
| map7 | I keep getting Segmentation Faults when commit changes to my diskless mythbuntu client | 06:37 |
| map7 | When it runs mksquashfs | 06:38 |
| superm1 | check your memory to start then | 06:38 |
| map7 | I've checked the bugs list for squashfs-tools and I see someone fixed a seg fault problem in 3.3 in November 2008, I'm still on 3.3.7 (the latest for ubuntu) is there a way to install squashfs4.0 under ubuntu 8.10? | 06:40 |
| map7 | in the meantime I will run a mem test. | 06:40 |
| map7 | sometimes it builds the image and other times it bombs out at different points | 06:40 |
| map7 | if it makes the image, the image works fine on my PXE machines | 06:40 |
| map7 | If I type 'make' in the source directory of squashfs4.0 it fails under ubuntu 8.10 | 06:45 |
| superm1 | if it's bombing out at different times, that's a good indicator of memory problems indeed | 06:45 |
| superm1 | i'd not pull in the newer squashfs unless you have the kernel bits too | 06:46 |
| map7 | I see squashfs 4.0 is for kernel 2.6.29 only, which I don't run, but it does say for that kernel no patching is necessary | 06:47 |
| map7 | i'm doing a memtest, ill leave that going over night | 06:47 |
| map7 | superm1 the memory test has passed once with no errors using Memtest+86 | 07:55 |
| map7 | does anyone else here get Seg Faults when using mksquashfs? and do you just keep trying until it passes? | 07:56 |
| Shadow__X | map7, let it run for like 2 or 3 times just in case | 08:12 |
| Shadow__X | you can also try a stress test | 08:12 |
| Shadow__X | just to make sure | 08:12 |
| Shadow__X | i have had flaky systems before | 08:12 |
| Shadow__X | no fun | 08:12 |
| map7 | yeah I've left it going, and will leave it over night so that should be another 15hrs of testing | 08:13 |
| Shadow__X | sounds good | 08:13 |
| map7 | well i'm going to drink beer now, bye | 08:16 |
| === map7 is now known as map7`away | ||
| Shadow__X | see ya | 08:17 |
| citybird | when i run mythfilldatabase --manual how many times do i have to run though the channels? this is my 4th or 5th pass | 10:10 |
| Technophil | once! Something sounds a wry | 10:46 |
| citybird | it failed after about the 7th pass but all the channels are there now. | 11:05 |
| citybird | Technophil: when i click to watch tv the screen goes blank for about 30 seconds and then comes right back to the main menu | 11:09 |
| Technophil | Something still sounds a wry. Standard advise is to check you logs for clues as to what is failing | 11:15 |
| citybird | hey there is a mythbuntu pastebin | 11:25 |
| citybird | http://mythbuntu.pastebin.com/f62bbc8fe | 11:26 |
| citybird | that's me | 11:26 |
| citybird | looks like they forgot to change the theme dir to 9.04 | 11:28 |
| citybird | first thing it says is i forgot to bind video sources to the cards | 11:36 |
| citybird | super strange since it detects the signal when i run a channel scan | 11:43 |
| Technophil | R you running 9.04 front and back end? | 12:00 |
| Technophil | I am not surprised you get no pic when it says NVR(/dev/video0): Unknown video codec | 12:02 |
| Technophil | Revise your video sources | 12:03 |
| citybird | Technophil: vid source setup gives very few things to change and it all looks good | 13:52 |
| citybird | running the setup again | 13:53 |
| citybird | and it's asking to add channels again | 13:53 |
| BaZiL | what is the latest stable version of mythbuntu ? | 17:04 |
| BaZiL | is 9.04 ok ? | 17:04 |
| superm1 | yes 9.04 is the latest stable version | 17:08 |
| superm1 | see /t | 17:08 |
| citybird | hey when i click watch tv it comes back to the menu | 17:17 |
| tgm4883 | !logs | citybird | 17:19 |
| Zinn | citybird: MythTV logs are stored in /var/log/mythtv/ You can use mythbuntu-log-grabber from the Applications menu to automatically post the most relevant logs to our pastebin. | 17:19 |
| citybird | checked the logs and it says set up the 4 profiles. did that. | 17:20 |
| tgm4883 | citybird, pastebin the logs | 17:21 |
| citybird | k | 17:21 |
| citybird | http://mythbuntu.pastebin.com/f4d5904af | 17:23 |
| citybird | says error failed to find channel | 17:23 |
| tgm4883 | citybird, what kind of tuner? | 17:24 |
| citybird | analog | 17:24 |
| tgm4883 | who makes it? | 17:24 |
| citybird | http://www.mythtv.org/wiki/PVR-500 | 17:24 |
| BaZiL | when i try to upgrade to 9.04 .. it runs untill Loading LIRC modules .. then it just stops there .. .. any solutions to that ? | 17:25 |
| citybird | Hauppauge PVR-500 | 17:25 |
| tgm4883 | citybird, ok, and what did you set it up as under mythtv-setup in step 2 (or was it step 1) | 17:25 |
| citybird | hmm have to run setup again to see? | 17:26 |
| tgm4883 | citybird, yea, unless you remember | 17:26 |
| citybird | ok | 17:27 |
| citybird | pal-bg | 17:27 |
| citybird | pal teletext | 17:28 |
| citybird | europe west | 17:28 |
| citybird | part 2 is about capture card | 17:28 |
| tgm4883 | ok | 17:28 |
| citybird | v4l dev/video0 and video1 | 17:28 |
| citybird | card type is analog v4l capture card | 17:29 |
| tgm4883 | citybird, ok, thats the problem | 17:29 |
| tgm4883 | your card is setup wrong | 17:29 |
| citybird | IVTV right? | 17:29 |
| tgm4883 | it should be setup as a hardware encoder card | 17:29 |
| citybird | or mjpeg capture card? | 17:30 |
| tgm4883 | citybird, neither, it's a hardware encoder card | 17:31 |
| citybird | i can't find that option | 17:31 |
| citybird | checking | 17:31 |
| citybird | ah crap i think i need to install drivers | 17:32 |
| tgm4883 | drivers for that card are already included | 17:33 |
| citybird | ok now i have to get fancy | 17:33 |
| tgm4883 | fancy for what? You select the type of card it is, that cards support is built into the kernel and works OOB | 17:34 |
| citybird | yes you are right i was trying to get to a terminal window | 17:35 |
| citybird | everything is detected | 17:35 |
| citybird | but the choices are: | 17:35 |
| citybird | mjpeg capture card | 17:36 |
| citybird | analog v4l captue card | 17:36 |
| citybird | IVTV mpeg-2 encoder card | 17:36 |
| citybird | is that it?? | 17:36 |
| tgm4883 | IVTV mpeg-2 encoder card | 17:37 |
| citybird | that's the only one that makes sense | 17:37 |
| tgm4883 | sorry about that, I could have sworn it was called the other thing | 17:37 |
| citybird | ok thanks | 17:37 |
| tgm4883 | it should say (PVR-XX0) or something like that | 17:37 |
| citybird | it does | 17:38 |
| tgm4883 | ok | 17:38 |
| tgm4883 | then thats the right one | 17:38 |
| tgm4883 | you might have to do steps 3 and 4 again | 17:38 |
| citybird | should i rescan video sources or something now? | 17:38 |
| citybird | ah right ill do that now | 17:38 |
| tgm4883 | well, not 3, but 4 | 17:38 |
| tgm4883 | yea do 4, you should get some channels listed now | 17:38 |
| citybird | started 3 already | 17:39 |
| citybird | should i do that EIT scan again or skip? | 17:39 |
| tgm4883 | IIRC, EIT only works with digital cards | 17:40 |
| citybird | ah never knew that | 17:41 |
| citybird | might have to get a digital card for my second box | 17:41 |
| citybird | first box is for work | 17:41 |
| citybird | and i think it's hard to find the analog cards now. | 17:42 |
| citybird | running fetch channels from lintings sourc3 | 17:42 |
| citybird | listings source | 17:42 |
| citybird | thanks for the tips | 17:43 |
| tgm4883 | yea most are discontinued | 17:43 |
| citybird | finally!! | 17:43 |
| citybird | found where i should add the dam starting channel | 17:43 |
| citybird | looked all over for that | 17:43 |
| citybird | gotta remember | 17:43 |
| tgm4883 | so it should all work now | 17:44 |
| tgm4883 | the starting channel thing shouldn't be an issue once you set it | 17:44 |
| tgm4883 | IIRC, it will default to the last channel you watched | 17:44 |
| citybird | takes a while to run | 17:44 |
| citybird | ah good makes sense | 17:45 |
| citybird | gotta run out for a while | 17:48 |
| citybird | thanks again. | 17:48 |
| citybird | bb on later | 17:48 |
| BaZiL | after i upgraded to 9.04 .. my webserver seem to be locked to only the mythtv site .. al my subdomains seems to be pointed to webmyth . how do i remove that ? | 19:28 |
| Jakal | Can someone help me? I am trying to set my screen resolution to 1360x768. but eah time i do the screen gets garbled then goes blank. this is the resolution of my hd tv. anyone know how to fix it? | 19:31 |
| MythbuntuGuest15 | hi i have installed mythbuntu on my laptop and i added the virtual manager and then i restarted and all that came up was a blank scroon what can i do to repair it | 21:45 |
| MythbuntuGuest15 | huge problem for me | 21:46 |
| MythbuntuGuest15 | please help | 21:46 |
| MythbuntuGuest15 | hello can anyone help me | 21:50 |
| MythbuntuGuest15 | please? | 21:50 |
| superm1 | !forums | MythbuntuGuest15 | 22:01 |
| Zinn | MythbuntuGuest15: The Mythbuntu forums are located at http://ubuntuforums.org/forumdisplay.php?f=301. If you aren't getting a timely response here, there are lots of very active individuals there that may be able to help. | 22:01 |
| Jakal | i dont supose anyone answered my question while i was gone? | 23:14 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!