[00:09] mac9416, that means you need to associate the card with a data source still [00:09] (usually) [00:27] superm1, how do I go about that? [02:21] I'm getting 'Cannot login to database?' from my remote machine can someone help me? [02:22] I've changed my backend & master backend IP address to my actual IP address instead of localhost [02:23] & entered in a security pin [02:25] I've enabled mysql as a service [02:27] Found it, I had to remark out the 'bind-address=127.0.0.1' in my /etc/mysql/my.cnf file [02:27] Why doesn't mythbuntu-control-center do this? [04:21] hi there! i just finished installing Mythbuntu. during install i had both my monitor and my TV connected (via S-Video). once the instaltion ended and the PC rebooted, the graphics card can only see the TV. the VGA output isnt displayed on Nvidia-Settings. how can i output video to my VGA monitor? [04:23] what video card do you have [04:23] fx5500 [04:24] run nvidia-settings [04:24] during install, i used the monitor. after the reboot, monitor went into stand-by. [04:24] i have. nvidia-settings only shows one available output: TV-Out [04:26] i wonder if i have to re-install the distro with the S-Video cable off... :-\ [04:26] no your issue isnt with the distro is setting up the video card [04:26] i know. [04:27] what i meant was, maybe, if i re-install with the cable off, the auto-setup will keep me on the VGA output. [04:27] in nvidia-settings under x server display config it only has one displayer there [04:28] yep. it says "TV-0". [04:28] i've tried "Detect Displays". no diff. [04:28] alright i have to leave for a bit but look into nvidia-settings and your video card [04:28] that will give you the answer or someone else [04:29] i guess i'll re-install it... [04:29] thx, anyway. [04:30] yeah i mean i would suggest fixing it and not just reinstalling [04:30] i know. but i've been trying it for the last hour... all the obvious dialog-boxes have had no effect. [04:31] maybe if i uninstall the Nvidia drivers and re-install them... [04:48] Yep good idea and ensure system is up to date. [04:52] didnt work. i started the re-install. just noticed sth... the install has a dilog that asks whether i wanna use "Open" or "Proprietary" drivers. the same dialog asks if i want to "Enable TV-Out". during the previous install i chose "Enable". that's probably where the mess happened. i'm re-instaling with the S-Video cable off and the TV-Out option disabled. let's see. [04:55] yes enable [04:56] Woops, use propriatary [04:56] can enable later [04:56] thta's my plan. enabling it later. [06:37] I keep getting Segmentation Faults when commit changes to my diskless mythbuntu client [06:38] When it runs mksquashfs [06:38] check your memory to start then [06:40] I've checked the bugs list for squashfs-tools and I see someone fixed a seg fault problem in 3.3 in November 2008, I'm still on 3.3.7 (the latest for ubuntu) is there a way to install squashfs4.0 under ubuntu 8.10? [06:40] in the meantime I will run a mem test. [06:40] sometimes it builds the image and other times it bombs out at different points [06:40] if it makes the image, the image works fine on my PXE machines [06:45] If I type 'make' in the source directory of squashfs4.0 it fails under ubuntu 8.10 [06:45] if it's bombing out at different times, that's a good indicator of memory problems indeed [06:46] i'd not pull in the newer squashfs unless you have the kernel bits too [06:47] I see squashfs 4.0 is for kernel 2.6.29 only, which I don't run, but it does say for that kernel no patching is necessary [06:47] i'm doing a memtest, ill leave that going over night [07:55] superm1 the memory test has passed once with no errors using Memtest+86 [07:56] does anyone else here get Seg Faults when using mksquashfs? and do you just keep trying until it passes? [08:12] map7, let it run for like 2 or 3 times just in case [08:12] you can also try a stress test [08:12] just to make sure [08:12] i have had flaky systems before [08:12] no fun [08:13] yeah I've left it going, and will leave it over night so that should be another 15hrs of testing [08:13] sounds good [08:16] well i'm going to drink beer now, bye === map7 is now known as map7`away [08:17] see ya [10:10] when i run mythfilldatabase --manual how many times do i have to run though the channels? this is my 4th or 5th pass [10:46] once! Something sounds a wry [11:05] it failed after about the 7th pass but all the channels are there now. [11:09] Technophil: when i click to watch tv the screen goes blank for about 30 seconds and then comes right back to the main menu [11:15] Something still sounds a wry. Standard advise is to check you logs for clues as to what is failing [11:25] hey there is a mythbuntu pastebin [11:26] http://mythbuntu.pastebin.com/f62bbc8fe [11:26] that's me [11:28] looks like they forgot to change the theme dir to 9.04 [11:36] first thing it says is i forgot to bind video sources to the cards [11:43] super strange since it detects the signal when i run a channel scan [12:00] R you running 9.04 front and back end? [12:02] I am not surprised you get no pic when it says NVR(/dev/video0): Unknown video codec [12:03] Revise your video sources [13:52] Technophil: vid source setup gives very few things to change and it all looks good [13:53] running the setup again [13:53] and it's asking to add channels again [17:04] what is the latest stable version of mythbuntu ? [17:04] is 9.04 ok ? [17:08] yes 9.04 is the latest stable version [17:08] see /t [17:17] hey when i click watch tv it comes back to the menu [17:19] !logs | citybird [17:19] citybird: MythTV logs are stored in /var/log/mythtv/ You can use mythbuntu-log-grabber from the Applications menu to automatically post the most relevant logs to our pastebin. [17:20] checked the logs and it says set up the 4 profiles. did that. [17:21] citybird, pastebin the logs [17:21] k [17:23] http://mythbuntu.pastebin.com/f4d5904af [17:23] says error failed to find channel [17:24] citybird, what kind of tuner? [17:24] analog [17:24] who makes it? [17:24] http://www.mythtv.org/wiki/PVR-500 [17:25] when i try to upgrade to 9.04 .. it runs untill Loading LIRC modules .. then it just stops there .. .. any solutions to that ? [17:25] Hauppauge PVR-500 [17:25] citybird, ok, and what did you set it up as under mythtv-setup in step 2 (or was it step 1) [17:26] hmm have to run setup again to see? [17:26] citybird, yea, unless you remember [17:27] ok [17:27] pal-bg [17:28] pal teletext [17:28] europe west [17:28] part 2 is about capture card [17:28] ok [17:28] v4l dev/video0 and video1 [17:29] card type is analog v4l capture card [17:29] citybird, ok, thats the problem [17:29] your card is setup wrong [17:29] IVTV right? [17:29] it should be setup as a hardware encoder card [17:30] or mjpeg capture card? [17:31] citybird, neither, it's a hardware encoder card [17:31] i can't find that option [17:31] checking [17:32] ah crap i think i need to install drivers [17:33] drivers for that card are already included [17:33] ok now i have to get fancy [17:34] fancy for what? You select the type of card it is, that cards support is built into the kernel and works OOB [17:35] yes you are right i was trying to get to a terminal window [17:35] everything is detected [17:35] but the choices are: [17:36] mjpeg capture card [17:36] analog v4l captue card [17:36] IVTV mpeg-2 encoder card [17:36] is that it?? [17:37] IVTV mpeg-2 encoder card [17:37] that's the only one that makes sense [17:37] sorry about that, I could have sworn it was called the other thing [17:37] ok thanks [17:37] it should say (PVR-XX0) or something like that [17:38] it does [17:38] ok [17:38] then thats the right one [17:38] you might have to do steps 3 and 4 again [17:38] should i rescan video sources or something now? [17:38] ah right ill do that now [17:38] well, not 3, but 4 [17:38] yea do 4, you should get some channels listed now [17:39] started 3 already [17:39] should i do that EIT scan again or skip? [17:40] IIRC, EIT only works with digital cards [17:41] ah never knew that [17:41] might have to get a digital card for my second box [17:41] first box is for work [17:42] and i think it's hard to find the analog cards now. [17:42] running fetch channels from lintings sourc3 [17:42] listings source [17:43] thanks for the tips [17:43] yea most are discontinued [17:43] finally!! [17:43] found where i should add the dam starting channel [17:43] looked all over for that [17:43] gotta remember [17:44] so it should all work now [17:44] the starting channel thing shouldn't be an issue once you set it [17:44] IIRC, it will default to the last channel you watched [17:44] takes a while to run [17:45] ah good makes sense [17:48] gotta run out for a while [17:48] thanks again. [17:48] bb on later [19:28] after i upgraded to 9.04 .. my webserver seem to be locked to only the mythtv site .. al my subdomains seems to be pointed to webmyth . how do i remove that ? [19:31] Can someone help me? I am trying to set my screen resolution to 1360x768. but eah time i do the screen gets garbled then goes blank. this is the resolution of my hd tv. anyone know how to fix it? [21:45] hi i have installed mythbuntu on my laptop and i added the virtual manager and then i restarted and all that came up was a blank scroon what can i do to repair it [21:46] huge problem for me [21:46] please help [21:50] hello can anyone help me [21:50] please? [22:01] !forums | MythbuntuGuest15 [22:01] MythbuntuGuest15: The Mythbuntu forums are located at http://ubuntuforums.org/forumdisplay.php?f=301. If you aren't getting a timely response here, there are lots of very active individuals there that may be able to help. [23:14] i dont supose anyone answered my question while i was gone?