[00:10] can someone point me to an example xorg.conf for 9.04 for lircmd? i can only find one for earlier versions. [00:27] Has anybody had any problems with live-tv freezing at the end of a show's time-slot? (I'm using the 'fixed' weekly build repo) [00:27] It seems to be a front-end problem rather than a back-end problem. [00:30] hi guys, is there a way to run the mythbuntu livecd from usb stick? i havent got any blank CDs around >.< [00:45] now just things are a little fuzzy [00:57] i'm using svideo to go from me computer to a 16x9 lcd tv. is that why things are a little fuzzier than they should be? [02:40] neoteny_2nd, yeah use dvi or hdmi [03:18] SHADOW_V, well i went and bought the adapter and cable. here goes [03:18] k [03:18] gl [03:46] the picture is better but sound isn't going through the cable. should it? [04:13] neoteny_2nd, only if you have it setup that way [04:14] http://www.mythtv.org/wiki/HDMI [04:30] SHADOW_V, thanks. for now i'm just sending it through the audio jack of the sound card. i'll check that link out in the morning. === pizdets is now known as pizzledizzle [04:30] k === MythbuntuGuest93 is now known as miststlkr [11:46] Hi guys [11:46] I'm having trouble with the frontend freezing on startup. [11:46] Can someone tell me where the program is called, so I can add more log options? [11:47] (I'm not that familiar with the Debian setup.) [11:47] Thanks [13:25] i upgraded to ubuntu jaunty and now my pvr-350 remote doesn [13:25] work. I can't even get any output from irw. can someone help please. [13:26] fo3nix, what do you mean where is the frontend logged? you can start mythfrontend from the terminal and adding whatever options you want [13:26] it logs to /var/log/mythtv/mythfrontend.log if you start it from the menu. [13:27] What I mean is that I have it set (just default options) to start frontend when I turn the machine on and it logs me in automatically (this is a new install) [13:27] frontend freezes immediately, I'm jsut left with some grey gradients where it's supposed to load the menu [13:28] if i can edit the call that it starts up with, I can add some more flags I think to log more verbosely [13:28] (I don't think it uses fully-verbose logs by default, but I could be wrong.) [13:34] fo3nix_, oh. it calls it from /etc/init.d/ I am pretty sure. [13:34] Thanks [13:34] I'm an Arch guy, haven't used much Debian-based stuff [13:35] anyone out there help me with my pvr-350 remote? it stopped receiving signals after upgrade but the seperate serial transmitter is still working with the external STB for whatever reason. [13:45] i have a Hauppage WinTV-PVR-USB2 and it's working fine but the remote is acting wierd. buttons repeat sometimes and sometimes when you press a different button it just enters in the last button pressed. i don't think it's the remote itself because it's a pretty new remote. [13:49] neoteny, don't remote configs have a delay or something in them? Have you looked around for remote configs for your remote and see what others are putting in theres? [13:50] mazda01, not yet. that was the state when i fell asleep last night. i'll look around for remote config files today. [13:51] all i have left to have a rockin set up is to get the remote working properly and the to figure out how to get it to work as a mouse [13:51] neoteny, did you try out Mythbuntu Control Center? It has a lirc configurator built in/ [13:52] mazda01, will that set my remote up as a mouse? [13:54] neoteny, i am not sure about that. you could ask in the mythbuntu forums at ubuntuforums.org or try to google it. Why do you want your remote to act as a mouse> [13:54] mazda01, to control the pc when it's not in mythtv mode. [13:54] neoteny, ah. i see. not sure. sorry. [13:56] mazda01, i don't know why everyone wouldn't want that. [13:58] neoteny, most people with a awesome setup for mythtv most likely don't use that same computer as a computer, it's a dedicated media center in myth only. [13:58] i think that about a lot of things and then someone busts out about a million reasons and reminds me in just a frog in a well. [14:00] hmmm one of my remotes has a button labeled 'mouse mode' [14:14] someone please help me with my PVR-350 ir recevier. it stoppped working after I upgraded to Jaunty [14:37] someone please help me with my PVR-350 ir recevier. it stoppped working after I upgraded to Jaunty [15:23] Morning [15:33] i'm following a tutorial on setting up remotes and it says my remote should have a line in the output from ls -lah /dev/input/by-path/ but there is none. but my remote is working. [15:35] i'm trying to get Ir-kbd-i2c working [15:36] all of the tutorials i can find say i need to get the event number for my remote using that command. [15:42] noeteny_2nd, if your remote is working then what do you need?> [15:44] mazda01, i'm trying to set it up to control apps not in mythtv [17:25] getting closer. now my remote works as a keyboard. just need to figure out how to map the rest of the buttons. [19:00] ok. one last problem i think. i'm following the lircmd setup instructions on the lirc site. and it says to put move commands in the lircmd.conf file which i have. but i can't get the remote to mouse to move as it seems like it should. the remote does do some things in varios apps like mplayer. but shouldn't the remote move the cursor when i press the buttons according to lircmd.conf? [19:01] neoteny_2nd, if your remote is supported mythbuntu will generate a .conf for you [19:04] SHADOW_V, it's supported. it's the grey hauppauge remote. the question i have is should it be able to move the cursor around. for instance the lircmd.conf file says MOVE_N * 2 does that mean if i press 2 on the remote the cursor would move up as if i moved my mouse up? [19:05] neoteny_2nd, you dont need to move the mouse [19:05] i have a generic mce remote [19:05] and it works great [19:05] and you dont need to move the mouse [19:05] its easier to not have it that way [19:05] SHADOW_V, ok. the how to i browse in ff and click on links? [19:06] SHADOW_V, but doesn't MOVE_N * 2 suppose to enable it to move the cursor up, notwithstanding whether i should want to or not? [19:07] neoteny_2nd, if you let the mythbuntu lirc configurer do its just [19:07] itll function perfectly fine [19:08] SHADOW_V, i did that but those types of functions aren't working. [19:09] http://www.mythtv.org/wiki/Image:MCE-Remote-2-v1069.jpg [19:09] thats what i have [19:10] SHADOW_V, and does your remote function as a mouse when your not in the mythtv frontend? [19:10] as in point and clicking? [19:12] oh no but none of those remotes where designed that way [19:12] and i dont know how to set that up they are designed to be used with a 10' ui [19:12] get a remote like this [19:12] http://www.technofile.com/images/aiw_9700remote.jpg [19:13] SHADOW_V, you're wrong about that i'm pretty sure. you should be able to control your mouse. [19:14] neoteny_2nd, eh i dont know about that they dont look like the best things to control the mouse [19:14] but carry on [19:47] Hi :) [19:47] I have Coreavcdecoder.ax file and want it to use with Friptv iptv application. Compiled app, but it is complaining, that mpeg_demux: No video decoder connected! Where to place this coreavcdecoder.ax? [20:23] When I go to system>main menu and change the order or add something to the menu the change does not take effect. I tried sudo refresh-menus in a terminal and it did not seem to have any effect. Suggestions?