[00:00] !firefox [00:00] firefox is the default web-browser on Ubuntu. To install the latest version, see https://help.ubuntu.com/community/FirefoxNewVersion Installing plugins: https://wiki.ubuntu.com/FirefoxPlugins - See also !firefox-3.5 [00:00] !firefox-3.5 [00:00] Firefox 3.5 Final is available for Jaunty by installing the package firefox-3.5 | FF3.5 is referred to as Shiretoko on your UI, see http://is.gd/1reB3 for an explanation | Hardy & Intrepid: http://is.gd/1jkNY [00:09] Hi there. Is there a way to tell a specific package to use a special APT source instead of telling all other packages that are also included in that source not to use it? [00:10] fkm: "pinning"? [00:11] good night [00:11] Ok, I'll google that. Thank you darthanubis! :-) [00:11] !pin [00:11] pinning is an advanced feature that APT can use to prefer particular packages over others. See https://help.ubuntu.com/community/PinningHowto [00:11] Even better :-D [00:11] Thank you Pici :-) [00:11] anyone running KDE-4.3.0rc2? I think I found a minor bug and I would like to check if someone can reproduce it before I post a bug report at KDE [00:13] hi [00:14] how can i get pgp keys for xmbc on hardy? it seems website's link is broken here http://xbmc.org/wiki/?title=HOW-TO_install_XBMC_for_Linux_on_Ubuntu_with_a_minimal_installation_step-by-step#Adding_the_XBMC_Repo === eduardo is now known as Fus_ [00:27] anyone using 4.3rc1? [00:27] Notice plasma-desktop crashes when windows explode? [00:28] Heheh :-) I don't seem to be the first one to want the backports just for Amarok (https://help.ubuntu.com/community/UbuntuBackports) ;-) [00:29] Thank you again darthanubis and Pici! [00:30] darthanubis: I am running 4.3.0rc2 and having problems with kdemicroblogging, let alone try explosions ;) [00:31] so.. hmm no amarok1 without manual compilation? [00:34]

i need to istall a .rpm or .bundle file. I already have alien installed, but i can't figure it out [00:40]

!alien [00:40] RPM is the RedHat Package Management system. Ubuntu uses !APT, not RPM. RPM packages are not supported (the package "alien" can allow installing them, but it's quite dangerous and unsupported) [00:40]

... [00:41] what is the command in kubuntu to see your own ip? [00:42] Serpardum- ifconfig will show it [00:42] thanks [00:43]

and there any good virturam machine programs that wll work on kubuntu? [00:43]

virtual* [00:44] gettign some weird ip addresses. 10.0.2.15 and 192.168.56.101 [00:44] oh, no, that's good [00:46]

ba, gotta go === ep is now known as Guest40355 [01:06] hallo [01:24] Hmm.. how do I access a windows share with samba? [01:24] I think I got it [01:28] whats the difference between kubntu [01:28] and regular gnome [01:28] kuz i cant tell [01:29] you mean whats the difference between a gnome based version and the kde based one? [01:29] yes [01:30] i just installed kde based [01:30] and then.. ? you are now using kde? [01:30] yes [01:30] no difference some new proggies how do i switch between kdm and gdm [01:31] You don't need to switch between kdm and gdm to load gnome or KDE [01:31] sorry im ust stupid [01:31] trying: smbclient -L JIM-VISTA -uJim-Vista\Jim -plikeidtellyou Result in: Connection to JIM-VISTA failed (Error NT-STATUS_CONNECTION_REFUSED) [01:32] how do u switch betweenghome and kde [01:32] virii: do you have both of them installed? [01:32] home is a directory, kde is a gui [01:32] yes [01:32] =\ [01:32] I'm not sure I understand your question [01:32] I think it was a typo [01:32] try running konsole [01:32] if that's what you mean [01:32] i did an apt-get install kubuntu-desktop [01:32] =] [01:33] Serpardum: He means 'hhow do I switch between gnome and kde' [01:33] ahhh [01:33] virii: After you log out, pick gnome or KDE from the sessions list on the screen you login at [01:33] trying brb [01:35] Hurry, everyone hide before he comes back! [01:42] god gnome loads 20x faster [01:42] tx 4 ur help [01:42] how i run windows vista with wine =) [01:42] lol that would be the bomb [01:46] Hey guys is there a simple gui way to record the audio of a specific application (preferably) or at least record the audio of everything that comes out of my speakers in ubuntu 9.04? thanks [01:46] anyone have a bluetooth earpiece headset working in ubuntu 8.04 hardy? [01:46] =) === mushrOOm is now known as VerliHub === VerliHub is now known as mushrOOm [02:14] Waht is an "S" in a mode? -rwxrwSrwx [02:18] SUID maybe? [02:18] Lemme check [02:19] That one might be SGID, actually === supertux_ is now known as Guest85593 [02:47] In Compiz window manager, action icons (minimize, maximize and close) are missing. How can I fix it? [02:47] I need help w/ getting VNC to work [02:47] I did all the install of packages and opened ports. [02:48] any sed saavy people here? [02:48] And all I get from the other comp is "Server not found" [02:49] bkhuraijam: are you using metacity or emerald? [02:50] check to see if your theme is valid [02:52] can anyone help me? [02:53] anyone here? [02:53] * sseiersen looks around... [03:02] fetusbubble: I am using emerald [03:04] does the problem persist if you use a different theme? [03:04] any new about kde 4.3 RC2 in kubuntu? [03:05] any news about kde 4.3 RC2 in kubuntu? [03:05] jop [03:06] yes.. [03:07] I need help with kubuntu [03:08] I have a low screen resolution, which is keeping me from installing kubuntu :( [03:08] you've come to the right place [03:08] on Windows I use 1024X800, and on my kubuntu I only get 800X600 or something [03:09] I need help... [03:10] any news about kde 4.3 RC2 in kubuntu? [03:15] can sum1 help???? [03:15] wtf [03:15] what do you need help with? [03:15] wheres the kubuntu resolution settings? [03:16] K + apps + utilites [03:16] sorry K+ apps + system [03:17] where? [03:18] hit the big K [03:18] which do I click and open? [03:18] Screen Resize and Rotate [03:18] kk [03:19] I'm having trouble configuring audio. What is the correct way to configure my sound card ? [03:20] 1024X800 resolution isnt listed, like on Windows XP... [03:21] @ubuntu; are you running a live CD? if it isn't installed there is no point and trying to configure ubuntu [03:22] well I dont want to install it, if thats my max resolution... [03:22] I have installed it...It's not a live CD [03:23] @ubuntu what is your video card? [03:23] @vogelrl post lspci [03:23] NVidia GeForce 6100 [03:23] @ubuntu you need to install your drivers; just as you would in windows; you can't do that unless you actually install the operating system [03:24] @ubuntu cont. ubuntu and Nvidia = the best combo for hardware and software so you'll have alot of choices [03:24] are the drivers available? [03:24] ah yeah [03:24] lol [03:25] cool [03:25] you can compile them yourself [03:25] or [03:25] lspci is large...should I try to post it all ? [03:25] download them [03:25] where can I download them? nvidia.com? [03:25] install your base system first [03:25] then drivers [03:25] it won't work if you try to do it off live cd [03:26] hello i need help [03:26] im asking as future reference, but kubuntu does turn me on ;) [03:26] hello i'll try [03:26] how can i chat with ym in ubuntu [03:26] kubuntu is awesome [03:26] @Divider thank you for helping me. [03:27] in ubuntu or kubuntu? pidgin = ubuntu; kopete = kubuntu [03:27] can i use yahoo messenger in kubuntu ? [03:27] you can in both [03:27] i tried but i can not connect [03:28] which messenger [03:28] pidgin or kopete [03:28] both [03:28] *hand forhead* [03:28] status is always connecting [03:28] behind router? [03:28] what do you means [03:28] hi, guys. i created a launcher using this path: ~/tomeNet/tomenet/./tomenet. the game loads its windows but gives me a lua 'meta display' error. what am i doing wrong? [03:29] @binMonkey run it in terminal and see the full error [03:32] vogelrl@bubuntu:~$ lspci [03:32] 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge [03:32] 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) [03:32] 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) [03:32] 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [03:32] vogelrl: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [03:33] 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [03:33] divider: this is what i get: [03:33] Read 41 bytes [03:33] Read 754 bytes [03:33] Read 0 bytes [03:33] XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0" [03:33] binMonkey: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [03:33] after 2041 requests (2035 known processed) with 0 events remaining. [03:33] sorry about that. [03:34] binmonkey are your drivers correctly configured? [03:35] divider: yes. the game runs correctly when i cd in the dir and ./tomenet to run it. i just wanted to create a launcher for it. [03:35] binmonkey: how are you pming me lol [03:36] i don't think i'm pming you. [03:37] binMonkey when you type my name it pms me lol [03:37] i think [03:37] sorry, i thought that just highlighted the message to you. [03:39] maybe, what did you type? in quotes please [03:40] no me funciona el cubo de compiz alguien me puede ayudar === Guest17712 is now known as fran_ [03:41] ummm. i typed "divid [tab complete] msg" [03:41] hello my cube it doesnt work can anybody help me [03:44] binMonkey: got ya [03:44] oi [03:44] fran_: what video chipset are you using [03:50] "could not mount New Volume: enclosing drive is locked" [03:50] i got this message while opening a newly formatted hard drive: how do i get around this? === ep is now known as Guest73861 === Hero-Eater is now known as SlayerOfAll [04:24] Any program installed which shows disk (partition) usage in pie chart or whatever? === Hero-Eater is now known as SlayerOfAll [04:29] What's an easy way space i've used in root? I have a seperate /home partition. Isn't there a gui app which shows this in chart form? Not seeing it in dolphin [04:35] I mean can some person tell me which line/s to change on xorg.config? [04:35] hi [04:36] anyone here? [04:36] hi, can you help me [04:39] Hello [04:40] Can some person help me configure xorg.config [04:46] slayerofall: what do you need? [04:48] hi [04:48] I need kubuntu resolution help [04:49] whats up CSS_Guru: ? [04:51] my max resolution in windows is 1024X600, but when I do kubuntu to try it out, my max resolution is 800X600 :( [04:52] 9.04 Anything to see disk usage? Ubuntu has a disk usage analyser. I suppose I can type df -Th in a terminal but I was thinking kubuntu would install something to view disk usage graphically. [05:04] nspluginviewer seems to be a cpu hog, holding at about 20% cpu usage. konqueror was lightweight before the flash install [05:05] CSS_Guru: sorry i lost it there, you still on? [05:06] are you useing the live cd? === ubuntu is now known as CSS_Guru === carlos is now known as Guest30861 === ep is now known as Guest39326 === ep is now known as Guest63798 === ep is now known as Guest98976 [06:15] In jaunty, why is kaffeine no longer kubuntu's default media player. Is it kde 4? === kb is now known as Guest6433 [06:22] ah kaffeine is kde3, I think jaunty tries to be kde4 only, no? [06:22] on the install i mean [06:31] Guest98976: true [06:31] though, somewhere is a kde4 port of kaffeine, meanwhile [06:32] good, hopefully I'll try it soon. [06:40] anyone know what this means kubuntu unknown argument --no-floppy? [06:41] in what context? [06:41] veck: what are you compiling? [06:42] frankS2_: nothing it does it at grub load [06:42] frankS2_: im having to use live cd right now [06:43] Does kubuntu come with the en_US locale by default? I think not. [06:46] veck I get google hits on that bug... one example: http://ubuntuforums.org/showthread.php?t=1194714 === mushrOOm is now known as VerliHub === VerliHub is now known as mushrOOm === hemathor_ is now known as hemathor [07:33] bonjour a tous [07:33] quelqu'un a t il des infos pour installer beryl sous jaunty === aria is now known as Guest97517 [07:38] quelqu'un a t il des infos pour installer beryl sous jaunty [07:39] papa, you might get more response if you ask in english [07:42] have pb whit pidgin? don't conect.. on yahoo ,help plzz [07:43] need help editing grub 2 [07:44] actually already edited it but cant save in kate [07:45] im on live cd trying to mount root and edit grub [07:46] veck: did you open it with root privileges? [07:46] Blizzz: no not sure how to from live cd [07:46] veck: kdesudo kate [07:48] Blizzz: ok opened with root now will it let me save or is grub read only? [07:49] veck: it should let you save it [07:49] Blizzz: im sry opened kate with privliges [07:49] kk thnx [07:49] yw [07:59] Blizzz: thnx so much my grub2 kept throwing --no-floppy errors so had to boot from cd and edit it but it worked im back on line thnx [08:01] :) [08:06] !netsplit [08:06] netsplit is when two IRC servers of the same network (like freenode) disconnect from each other, so users on one server stop seeing users on the other. If this is happening now, just relax and enjoy the show. See http://en.wikipedia.org/wiki/Netsplit [08:10] hi, I installed kubuntu, and have my graphics card up and working, but I can't seem to get compiz to work, I got compiz-kde what else do I need to do? [08:14] oops sorry, managed to crash quassel === zoiss_ is now known as zoiss === Shaan7 is now known as Shaan7|lunch === muesli_ is now known as muesli [08:29] gah, quassel is acting up, anyway the original question was: hi, I installed kubuntu, and have my graphics card up and working, but I can't seem to get compiz to work, I got compiz-kde what else do I need to do? [08:36] James_S: I think that you just need to enable desktop effects in system settings [08:36] (I don't think that's the same as compiz though) [08:47] türk varmı aranızda ? [08:50] anyone here? [08:50] I need help with kubunut 4.06 [08:50] kubuntu* === tommy is now known as Guest53782 === Guest53782 is now known as CSS_Guru [08:56] CSS_Guru: 4.06? is that not... old? [08:56] anyway brb [09:01] hi....i need help with an error i am getting when installing sun-java6-jre - 6-13-1 [09:01] the error is unknown error, but in details there is some info [09:02] after Unpacking sun-java6-jre (from .../sun-java6-jre_6-13-1_all.deb) .. [09:02] the next message is sun-dlj-v1-1 license could not be presented [09:02] try 'dpkg-reconfigure debconf' to select a frontend other than noninteractive [09:04] i already tried the dpkg-reconfigure and chose Kde [09:04] i tried installing earlier and it aborted because of wrong password, so there may be some junk left behind by installer? [09:13] Er, which is better suited to KDE, gtk or qt? I have an option on which interface to use [09:18] smart failure occured after partitiong hdd with gpart [09:23] http://www.kdenews.org/2009/07/09/kde-430-rc2-codenamed-canteras-released [09:24] RurouniJones: given kde is written with qt... [09:24] That was what I needed to know, cheers. [09:25] A simple "qt" would have done though, not everyone is intimately familiar with the interface framework of their windowing systems :p [09:26] hello, how can i formatting usb flash drive in kubuntu jaunty? thanks [09:32] ive used testdisk to recover the partition table an restore the partiotions..but a smart failure occurs on hdd on booting . [09:36] ank123: ignore it [09:37] hi...i need help installing java [09:38] i get the error that seems to have been reported in past: sun-dlj-v1-1 license could not be presented [09:39] the suggested workaround is to ensure dbconf is configured to use Dialog interface, but i get this error even with that setting [09:44] hello [09:45] how can I display all rooms in Quassel? I don't find the option [10:10] народа много [10:10] русские есть ? [10:10] фак [10:11] hi everybody. How can i get rid of auto disabling of compositing each time it gets slow [10:12] beause i know that it is not permanent and most of the time it is working fine [10:13] desu: it says to press f1 to continue but nthng happens..also i dnt have any op installed because the primary partiton(the bootable one) got lost in partiton recovery [10:15] ugur: Desktop Effects → Advanced → Disable functionality checks [10:16] ok thanks Blizzz [10:17] yw [10:17] ank123: i think you should try gparted boot cd or any live ubuntu distribution [10:17] to check for your partitions first and see whether they are in place [10:18] if the partitions are safe and if it is only a boot sector problem then you can reinstall grub easily to recover your partitions [10:21] ank123: in the BIOS? [10:23] list [10:24] anyone?? [10:25] hi shyam [10:26] what this place is all about?? [10:26] its all dead [10:26] shyam, kubuntu OS support [10:26] chat in #kubuntu-offtopic shyam === diego is now known as Guest58066 [10:38] hi all, what about kubuntu-ppa ?? what does it enable if i put "deb http://ppa.launchpad.net/kubuntu-ppa/ppa/ubuntu jaunty main" in sources.list? does it enable experimental and backports? [10:42] desu: yes in the bios...it gives the error in bios [10:44] !key [10:44] Sorry, I don't know anything about key [10:44] !ppa [10:44] With Launchpad's Personal Package Archives (PPA), you can build and publish binary Ubuntu packages for multiple architectures simply by uploading an Ubuntu source package to Launchpad. See https://help.launchpad.net/PPAQuickStart. [10:45] !keyring [10:45] Sorry, I don't know anything about keyring [10:46] ugur: i cant boot with any cd..it gives the error about smart disk failure ..asks me to make backups..tells me to press f1 to continue and when i press f1 nothing happens [10:47] ank123: i think smart option is enabled in the bios [10:48] the purpose of it is to check againts harddisk failures but it is highly unlikely that a harddisk fails [10:48] i am not sure whether it is a false alarm [10:49] but it is true you should first change your boot order from the bios [10:49] and put cd to a higher level then the hard disk so that bios first tries to boot from the cd [10:50] this may change from bios to bios but you can follow the instructions once you enter the bios screen [10:51] then boot with gparted cd and make a backup of your current harddisk to another media [10:51] then you can try to reinstall grub with ubuntu live cd === root is now known as Guest26503 [11:00] Devastating/odd behaviour here today ... When I try to print to a different tray in OOo it just prints to the regular tray ... Jaunty, HP Photosmart C5580 using hpijs ... if anyone knows anything about it get back to me :) [11:08] salve [11:19] Hmm, same behavior in Okular, must be a problem with cups and/or the printer drivers in Jaunty [11:21] hi guy's, could you help me with adjustment kdm autologin user with blank password? === maximo is now known as Maximo [11:24] What I must customize so as to autologged in system? I use kde and kdm. [11:25] sfdsd: have you tried looking in System Settings? === dario is now known as clark8 [11:26] rysiek|pl: no, actually i doing that... sed -i 's/^.*DefaultUser.*$/DefaultUser="myuser"/' /etc/kde3/kdm/kdmrc [11:26] sed -i 's/^.*NoPassUsers.*$/NoPassUsers="myuser"/' etc/kde3/kdm/kdmrc [11:27] sfdsd: just look in System Settings, Advanced Tab [11:27] but, unfortunately, it doesn/t work [11:28] I use kde 3.5.9 [11:28] sfdsd: I hope you have backed-up the kdmrc file before you started to modify it [11:28] sfdsd: can you PLEASE look in System Settings, as I have asked? [11:29] it's into control center? [11:29] sfdsd: du you use Kubuntu? [11:29] *do [11:29] debian [11:29] sfdsd: /join #debian [11:29] nobody can help me there [11:30] sfdsd: then /join #kde [11:30] sfdsd: in kubuntu you would go to System Settings -> Advanced -> Login Manager [11:30] and there =( [11:30] ok [11:31] sfdsd: Debian, with kde 3.5.x, I believe, doesn't have System Settings, so you either get help in #debian or #kde, or google it [11:33] how do i make my kubuntu talk italian instead of english system wide? i'm going to give this laptop to my brother and he doesn't want it in english [11:33] (without reinstalling it that is) [11:34] cga: somewhere in the menu you should find a language selection tool [11:35] cga: I'm not currently on kubuntu, so I can't help you, but look there [11:35] cga: or search through the kubuntu wiki [11:35] * rysiek|pl bbl [11:35] ok thanks [11:38] is wicd a KDE base app? === root is now known as Guest59835 === root is now known as Guest4418 === Out_Cold is now known as Guest55906 [12:38] How do I control the locales of my computer? [12:51] hi guis === login__ is now known as BB-brasil [12:53] hello !!!! === ner0x is now known as ner0x|away === rodolphe is now known as Hakurdideyh [13:19] hello [13:25] hi %) [13:44] How do I best install the latest kdevelop 4 in jaunty? === hfsdo_ is now known as hfsdo === ubuntu is now known as keopsito [14:04] buenas [14:04] alguien me podria indicar [14:04] como cambiarle el idioma [14:04] a kubuntu_ [14:06] !br | keopsito [14:06] keopsito: Por favor, use #ubuntu-br para ajuda em português. Obrigado. [14:06] !es | keopsito [14:06] keopsito: En la mayoría de canales Ubuntu se comunica en inglés. Para ayuda en Español, por favor entre en los canales #ubuntu-es o #kubuntu-es. [14:06] ... [14:06] oh thanks [14:06] Chat with bot? [14:06] * rysiek|pl isn't really sure, what is that language ;) [14:07] lorasairon: ? [14:07] rysiek|pl: nothing. joking... === desti_T2 is now known as desti [14:08] rysiek|pl: do you know what akonadi does for us? [14:09] rysiek|pl: I read a lot of materials but still do not know what it is... [14:09] lorasairon: it keeps all your personal info (address book, calendar, etc), and exposes a single, coherent API to get to those information [14:10] lorasairon: that means you can have your personal data in whatever format (supported by Akonadi) and use it in whichever application (that supposrts Akonadi) [14:10] lorasairon: but it's the beginning of the way, really, as the only app that supports Akonadi at the moment is Kontact AFAIK [14:10] well, can it back up all my emails to the kde on my another kde system? [14:10] which isn't that bad, OTOH [14:11] rysiek|pl: kontact is a start. [14:11] lorasairon: no idea :) [14:11] * rysiek|pl uses kontact and is very happy with it [14:12] well, i really do not want to copy ~/.kde to another system to copy my [14:12] emails... [14:13] alo === claire is now known as Guest94591 [14:13] lorasairon: I have no idea. check if the e-mails aren't in some ~/.kde/share/apps/akonadi or ~/.kde/share/apps/kmail or whatever [14:13] lorasairon: in Teh Old Days they were in ~/.kde/share/apps/kmail/ [14:13] How can I install the latest kdevelop 4 in jaunty? [14:13] how can I change the look of my KDE window manager - i really dislike i [14:13] please help me [14:14] homy: sudo aptitude install kdevelop4? [14:14] gambler: in systemsettings? [14:14] co-sakiit: what? [14:14] rysiek|pl: the problem is that is not the latest kdevelop 4 beta. (and anyway the package is kdevelop-kde4) [14:15] co-sakiit: you have to tell us what the prolem is, we do not have crystal balls [14:15] how to use window linux [14:15] * rysiek|pl noticed how ambiguous that was... [14:16] -_-' [14:16] co-sakiit: window linux? [14:16] co-sakiit: just click it. [14:16] iyes [14:16] how to use kubuntu [14:16] co-sakiit: window linux. I haven't heard that distros? [14:17] co-sakiit: you have to be more specific than that [14:17] co-sakiit: if you have a particular problem, we can try to help [14:17] yes [14:17] lorasairon,yay ty.. [14:17] co-sakiit: otherwise you just have to test, check and discover kubuntu yourself [14:17] how [14:17] ? [14:17] homy: I have no idea, have you tried googling for it? [14:18] co-sakiit: just boot it up, log-in and play? [14:18] rysiek|pl: yes, there isn't any ppa. [14:18] homy: in that case, if you *really* want to have the latest and greatest beta, you'll have to compile it yourself [14:18] homy: well, you might compile it? [14:18] rysiek|pl: I only find instructions to compile it from source :( [14:18] homy: omigosh, no, compilation is soo scary ;) [14:19] homy: and what are you going to use kdevelop4 for, anyway?.. [14:19] what do mean abaout boot [14:19] what do you mean abaout boot [14:19] homy: search debian repositories. I remember they accepted it. [14:19] co-sakiit: I mean either place the LiveCD in the CD tray of your computer and let it load from the cd [14:19] to compile/dev stuff that does not take 1 hour to compile and needs 20 different special libraries installed, ... [14:20] co-sakiit: or, if you already have it installed, just load it from disk [14:20] co-sakiit: http://en.wikipedia.org/wiki/Booting [14:20] http://packages.debian.org/lenny/kdevelop? [14:21] homy: http://packages.debian.org/lenny/kdevelop? [14:21] co-sakiit: on the other hand, don't go there, too technical [14:21] lorasairon: is still version 3.5.2 [14:21] yes, kubuntu i have is already it installed [14:21] homy: sorry, i saw the wrong place... [14:22] co-sakiit: great, then power on your computer and let it load kubuntu [14:22] http://packages.debian.org/experimental/kdevelop [14:22] * rysiek|pl notes that using debian packages in ubuntu is not supported and may lead to problems [14:22] can I just download the AMD64 deb and install it in ubuntu jaunty? [14:22] homy: look at what I have said above [14:22] oho [14:23] i don't now how to use sofware kubuntu [14:23]