[00:00] <Bigbucks> where does it ask me
[00:01] <Bigbucks> ok I found it, never mind
[00:13] <Bigbucks> so far so good
[00:13] <jeiworth> indeed
[00:16] <Bigbucks> about half way done
[00:29] <venky80> cant get kdesu to work
[00:29] <venky80> is there a config i can change to make it work
[00:29] <Bigbucks> how od I develop ubuntu programs
[00:32] <venky80> cant get kdesu to work
[00:32] <venky80> is there a config i can change to make it work
[00:38] <linuxguy> Hi can somebody tell me how to put modelines in the xorg.conf file please
[00:47] <tazsk8> how to install ubuntu intel x64 or amd x64??
[00:56] <localhost__> how can i limit my own pc....? i m using ubuntu
[00:59] <linuxguy>  Hi can somebody tell me how to put modelines in the xorg.conf file please
[01:07] <bigbucks> GRRRRR
[01:07] <bigbucks> !!!
[01:08] <bigbucks> I set it up on my USB drive, then I tried to boot vista *after taking out USB drive* and it loads GRUB
[01:08] <bigbucks> then gives an error
[01:08] <bigbucks> then I plug it back in, and it lets me choose OS, What the hell?
[01:09] <bigbucks> !!!
[01:10] <bigbucks> I didn;t have the ubuntu installer install anything on my main harddrive!
[01:11] <bigbucks> hello?
[01:14] <bigbucks> =(
[01:22] <linuxguy> bigbucks, i like you are finding help here pretty poor............after reading what you have typed here i think you have accidentally put grub on your hd and not the bootable usb stick
[01:24] <bigbucks> nope
[01:24] <bigbucks> my friend gave me the Terminal commands to fix it
[01:25] <bigbucks> let me run them by you guys.... apt-get install ms-sys
[01:25] <bigbucks> fdisk -l
[01:25] <bigbucks> ms-sys -m /dev/sda
[01:25] <bigbucks> that wont mess anything up right
[01:45] <linuxguy> Hi can somebody tell me how to put modelines in the xorg.conf file please
[02:06] <solidus-river> hey i lost the console in kate
[02:06] <solidus-river> how do i get it back?
[02:09] <nameiner> linuxguy: first you have to open the file as root in an editor
[02:13] <linuxguy> nameiner, yes i know i know i have to put something like Option Modes = !1280x1024" etc but I do not know all the commands
[02:14] <nameiner> linuxguy, did you have a look at man xorg.conf there is a decription of modelines in the monitor section
[02:15] <nameiner> you need a lot of specs from your monitor
[02:15] <linuxguy> nameiner, i just want to get a better res from my card a 1gb nvidia 9500gt monitor is good for 1200x1400 but 1280x1024 is good for me
[02:15] <linuxguy> nameiner, no not looked at man xorg.conf where would i see that pls
[02:16] <nameiner> linuxguy, do you have the nvidia driver installed?
[02:16] <nameiner> just type it in a console
[02:17] <linuxguy> nameiner, yes its the one they recommend the 180 ver but i know theres a 185 ver now
[02:19] <nameiner> linuxguy, then you should have the "nvidia x server settings" program installed, you can change the resolution in there
[02:20] <nameiner> linuxguy, on my kubuntu it's under settings in the K-menu
[02:22] <linuxguy> nameiner, yes i have that but the 1280x1024 res is missing if i cahnge a setting it does not save it to xorg.conf so i am basically stuck witha rather poor 1024x768 res
[02:23] <baba> ..
[02:24] <nameiner> linuxguy, hmmm, do you think you can find out all the specs of your monitor that you need for a modeline?
[02:26] <linuxguy> nameiner,  i think the specs r stuck to the back of the monitor
[02:28] <nameiner> linuxguy, no, I mean values like hdisp, hsyncstart and so on, these are normally in the handbook, if you're lucky
[02:30] <linuxguy> nameiner, nope not got those
[02:32] <nameiner> linuxguy, let's go back a bit. Did you say the res you want to use is not in the nvidia x server settings program or does it just not keep it after a restart of the system?
[02:35] <linuxguy> nameiner,  both really and my xorg.conf file is sparce
[02:40] <nameiner> linuxguy, i found a something to keep the changes you made. I found a website that says you need to put "nvidia-settings -l" with out the " in Autostart.
[02:41] <linuxguy> nameiner, thanks i will try that laaters :)
[02:42] <nameiner> linuxguy, maybe you also want to take a look at http://http.download.nvidia.com/XFree86/Linux-x86/1.0-8178/README/index.html
[02:43] <jsubl2> anyone using kde 4.3.1
[02:43] <nameiner> linuxguy, that are options for nvidia x server
[02:43] <linuxguy> nameiner, im reading that page now thanks again
[02:44] <nameiner> linuxguy, your welcome
[03:11] <carpii> is there anyway to setup a key shortcut in kmail, that moves a message to another folder ?
[03:23] <Guest43934> Whats up people?
[03:34] <a1234567890> any year picture calender download linux
[03:44] <keyser_soze> exit
[04:00] <jshewey> Can anyone tell me how to disable tap to click on my penryn macbook?
[04:01] <jshewey> I tried following this guide, but no go: http://www.bleepingcomputer.com/forums/topic225792.html
[04:04] <a1234567890> salom fish refund
[04:39] <corigo> Any Kate users out there? How can I get Kate to maintain my indents when hitting carriage return?
[04:51] <corigo> Any recommendations on a better code editor than Kate? Too many bugs.
[04:54] <zerothis> I'm about to head off to trade school to learn to make videogames (or not). I'm determined to remain committed to Libre Software. Does anybody have any advice for me? Does anybody know about Full Sail University?
[04:54] <zerothis> Does Canonical have any tines (at all) to Full Sail?
[05:26] <nadarilla> pls add me in fb
[05:31] <ubuntu> sera
[05:31] <ubuntu> ke nik di merda
[05:31] <ubuntu> ><
[05:31] <ubuntu> non ce nessuno?
[05:32] <ubuntu> dormite tutti?
[05:32] <ubuntu> DX
[05:32] <ubuntu> susu
[05:32] <ubuntu> quaalkuno sveglio
[05:32] <ubuntu> possibilmente una tipa
[05:32] <ubuntu> kosi la spakko di skiaffi un po
[05:33] <ubuntu> vabew
[05:33] <ubuntu> nottez
[05:36] <krushia> is there a way to get kprinter working under kde4 in kubuntu?
[06:48] <justanother> hi guys!
[06:48] <justanother> what files do i have to copy to get all my kde-settings on a new installation?
[06:48] <justanother> i tried copying the whole .kde directory, but that doesn't work (no plasma desktop and a few other problems)
[07:52] <jamey> frack man i just "chgrp -R groupname .
[07:52] <jamey> in /
[07:52] <jamey> made big mistake cant login now
[08:07] <adam> how do i remove the login screen so it auto starts up in kubuntu
[08:07] <Guest78014> how do i remove the login screen so it auto starts up in kubuntu
[08:36] <millun> hi
[08:36] <millun> if i wanna make a copy of "copy protected" movie dvd will dd do?
[08:36] <millun> or need i use some of the dvd ripping frontends?
[09:05] <azhoral> hi
[09:40] <chrizthop> halo
[09:46] <d08094> hallo
[09:49] <chrizthop> ??
[09:49] <chrizthop> :D
[10:57] <serzholino> Hi! Does anyone knows, will there be amarok 2.2 packages for jaunty?
[11:12] <mariner> one moment - i'll give you a repo
[11:13] <mariner> it is there deb http://ppa.launchpad.net/project-neon/ubuntu jaunty main
[11:14] <serzholino> mariner: thanks, will try it
[11:17] <mariner> the package is called amarok-nightly, not amarok
[11:17] <mariner> but it is unstable and mostly unusable
[11:17] <mariner> very slow
[11:18] <robin0800> serzholino: 2.2.1.90 out this morning for Karmic
[11:19] <serzholino> i better then upgrade to karmic beta when it will be out
[11:22] <robin0800> serzholino: beta is due October 1st
[11:23] <serzholino> robin0800: thanks, i think i can wait one more week :)
[12:08] <corigo> Any Kate users out there... is there a way to switch between multiple open documents (from the keyboard) in a single Kate window?
[12:18] <pepePlu> guys i hate the update manager
[12:19] <pepePlu> giving me sht load of updates to install every 2 days
[12:21] <Spaceman> corigo if you hadn't quit, you would have seen this reply, in kate 3 you can use ALT and either left or right arrow key to change tabs
[12:21] <Spaceman> lol
[12:22] <Spaceman> corigo if you hadn't quit, you would have seen this reply, in kate 3 you can use ALT and either left or right arrow key to change tabs
[12:22] <allan8904> hey, everytime i open kate or kontact 2 instances of it open in the taskbar, then when i quit the application only 1 dissapears...any ideas?
[12:23] <Spaceman> sounds like your shortcut is borked
[12:23] <Spaceman> look in system settings for default applications
[12:24] <corigo> Spaceman: thanks... don't know why client disconnected
[12:24] <corigo> Yeah. That works.
[12:24] <Spaceman> irc can be odd
[12:39] <prxq> Hi, I am using ubuntu 9.04 with kde3. How can I deactivate strigi and nempomuk? There is nothing in the system settings about it
[12:42] <alvin> Aren't these deactivated by default? (for giving too much trouble)
[12:42] <prxq> it is running here
[12:43] <prxq> ps shows them.
[12:45] <alvin> Not here. I don't know the command line and there seems to be no man page for the strigi client
[12:47] <alvin> In KDE3, in Kate it was possible to use auto-completion for tags. (to close them with Ctrl+<). How do I use this function in the current version of Kate?
[13:02] <Kvasir> I tried to upgrade kde but now I'm getting some error about missing dependencies: http://paste.ubuntu.com/276359/
[13:02] <Kvasir> how can I fix it?
[13:14] <prxq> this nepomuk thingy is as difficult to remove as malware.
[13:15] <prxq> who programms that kind of crap?
[13:18] <jarek> kubuntu
[13:19] <Kvasir> should I remove kdesudo to fix it?
[13:25] <Kvasir> that doesn't seem to work
[13:26] <Kvasir> whatever I do it complains about broken dependencies and suggests to do apt-get -f install, but that doesn't work either
[14:20] <BluesKaj> Hiyas all
[15:01] <Prune> to play encrypted dvds, is it best to install the entire Medibuntu repository
[15:01] <Prune> or just the individual package for that purpose?
[15:04] <darthanubis> Prune: without the repo "installed"' how will you install the package that is in that repo?
[15:06] <Prune> there're instructions - but if its more complicated - I should install the entire repository if its easier.  Is it easier?
[15:06] <genii> darthanubis: The medibuntu site actually has the direct d/l links for libdvdcss2 and win32codecs    etc so you can just use dpkg and not add their repos if you don't want to.
[15:07] <darthanubis> I know this. But it is pretty silly imo. Why not just add the repo like non anal users and be done with it?
[15:07] <robin0800> Prune: You could install the restricted package and libdvdcss2 separately
[15:08] <darthanubis> Prune: why don't you try and form an informed opinion and let us know?
[15:09] <darthanubis> You waste more time here asking questions that the medibuntu page answers
[15:09] <Prune> sounds like your consensus is install the whole package.
[15:09] <genii> Prune: They have there the one-liner shell command which is for all versions, I usually do the copy/paste of it and add the repos in that way. Then install the two packages libdvdcss2 and win32codecs (or win64codecs)
[15:09] <darthanubis> Direct download is faster than editing your sources.list so what do you think?
[15:10] <darthanubis> they have it already for you to copy and paste to do it all, edit source and add repo.
[15:10] <darthanubis> Did you know they had a webpage?
[15:11] <darthanubis> Because it does not appear you read any of it
[15:11] <darthanubis> peace
[15:16] <Prune> yes, thanks reading their webpage before went on here, they offered whole package or parts
[15:23] <sergio> hola
[15:24] <genii> !es | sergio
[16:00] <liekzomg> how do i turn on nepomuk file tags in information bar in dolphin? (kubuntu 9.04)
[16:14] <Hagus> cd ubuntu
[16:14] <Hagus> oops
[16:19] <jessica_> Where is the list of wine dependancies for kubuntu?
[16:19] <jessica_> I plan on manually compiling it but cannot find the list
[16:21] <genii> jessica_: Try checking http://packages.ubuntu.com/jaunty/wine
[16:21] <jessica_> genii: ah thanks.  i googled for it, but my search parameters sucked i guess ;D
[16:23] <Spaceman> run config in the wine folder and sudo apt-get install whatever it needs
[16:24] <jessica_> Spaceman: that's very tideous.  I wanted a more complete wine build with all the needed dependancies
[16:25] <jessica_> Doing that way would only give me the basic dependancies
[16:25] <Spaceman> did you find a list?
[16:25] <jessica_> yes
[16:25] <Spaceman> good
[16:25] <jessica_> Thank you though
[16:25] <jessica_> One more question, i've been looking at these themes on kde-look.org but have no idea how to install them.
[16:26] <jessica_> like window decorators
[17:05] <Newbee> hello
[17:05] <Newbee> I have installed jaunty and fglrx on my new notebook (ATI 3650 graphics) and I cannot anctivate composition in KWin
[17:06] <Newbee> but it says that I have OpenGL from the ATI driver and not from mesa
[17:17] <iapyx20> can someone give me the quick and dirty way of fixing a problem
[17:17] <iapyx20> it's sound related.
[17:18] <James147> iapyx20: just ask what you want to know, if someone knows the answer they will replay
[17:18] <James147> reply ^^
[17:20] <iapyx20> when i booted up, it's saying it thinks my sound and video cards have been unplugged, etc. they're not. i've had to go through like 20 pages of instructions to get the two working fine, and this makes like the tenth time
[17:20] <iapyx20> i just want the quick and dirty way of making the damn thing work and not act stupid anymore.
[17:21] <iapyx20> if someone could just supply me with a string of commands to check this out, i think the problem can be solved in less than 5 minutes.
[17:22] <nameiner> iapyx20, isn't there a "ignore" or "don't ask again" button in the first window that pops up, I can remember using that and then it never happened again.
[17:22] <iapyx20> yes, there is, but that's not the problem. the problem is the cards it's listing are the ones that are plugged in and supposed to be working.
[17:23] <iapyx20> -I have no sound-
[17:23] <iapyx20> they -were- working fine yesterday.
[17:25] <nameiner> iapyx20, sorry I can't help with that, my soundcard was listed but it still worked after I told the system that it is still there and to ignore that.
[17:31] <paradizelost> hey all, i'm having issues with plasma eating 99% of cpu
[17:31] <paradizelost> any ideas what could be causing it?
[17:45] <paradizelost> anyone here?
[18:01] <nerdy_kid> hey, I'm using KDE4.3.1 and trying to set up a shared folder. When I try to share a folder, I am presented with a dialog asking for the root password and indicating it wants to run, "kcmshell4 'fileshare'" and when I provide it, and click ok, it does nothing. When I run that in a terminal as the same user as the X session it says, "findServiceByDesktopPath: fileshare.desktop not found
[18:07] <seest> hi, i am wondering how i could be that my dvdrom drive wont read my empty discs, when it will read dvd that i have burned earlier?
[18:09] <iacopo> ciao
[18:24] <BluesKaj> !playdeb
[18:25] <BluesKaj> strange
[18:26] <krushia> asdf
[18:27] <krushia> oops wrong channel
[18:46] <jado> hi, which software could i use to use my scanner on kubuntu/kde?
[18:52] <lovre> hi all
[18:52] <lovre> i have bought a microphone, and i connected it to my computer. How do i make it work now?
[18:53] <somekool> hi
[18:53] <somekool> my /etc/init.d/mysql refers to a mysql_safe script in /usr/bin which is missing. am I missing a package?
[19:02] <JuJuBee> anybody use banshee to subscribe to podcasts?  I need help
[19:21] <linuxadmin> hello
[19:22] <roconnor> My university is getting me a new laptop.  Any recommendations?  My personal preference is for very light at the expense of cd-drives and whatnot.
[19:22] <roconnor> I currently have a Thinkpad x40
[19:26] <roconnor> Do any of the new tablet thinkpad features work under kubuntu?
[19:41] <BleSS> hi! I need configure dm-crypt using options that doesn't come with alternate installer (i.e. serpent-aes), does this has changed whith the last alpha?
[20:02] <Organized> hi
[20:02] <Organized> i want to change from ubuntu to kubuntu
[20:02] <Organized> just one question, ext3 or 4?
[20:04] <genii> Organized: What are you using under Ubuntu?
[20:04] <Organized> 3
[20:04] <Organized> i want to install completely new
[20:05] <Organized> 4 is newer, but there are more errors i heard?
[20:05] <genii> Organized: I would recommend ext3 for stability, there have been some probs with 4. But then your mileage may vary
[20:05] <Organized> whats mileage? im german sorry
[20:06] <genii> Organized: "Your experience may be different than other people, who had problems"
[20:06] <Organized> okay
[20:07] <Organized> is it possible to change from 4 to 3 if i have problems in a running system? or i have to format new?
[20:10] <genii> Organized: I don't know the answer to that. I do know ext3->ext4 is possible but the other direction, not sure
[20:11] <Organized> okay
[20:11] <Organized> i will try ext4 and if its not good running i reinstall kubuntu :) maybe its very good!
[20:15] <jamesjedimaster> Organized: I suggest you to read about ext4 and kubuntu. As far as I know there are some issues on losing data
[20:25] <apparle> hi guys
[20:28] <sewa> how can i remove unused services? (i.e. bluetooth service)
[20:34] <Gwen> Woot, Konversation Rulez
[20:35]  * genii hugs his Quassel
[20:35] <Spaceman> konversation certainly does have some rules
[20:35] <Spaceman> a few of them are quite pendantic
[20:35] <Gwen> It owns =)
[20:36] <James147_> what are the main differences between quassel and konversation?
[20:36] <Spaceman> 1
[20:36] <BluesKaj> quassel isn't to my taste ...too busy looking
[20:36] <Spaceman> konversation > quassel
[20:37] <genii> James147_: The main difference is that quassel can be split up into a core and a server, the server stays connected 24/7 and you never lose any backscroll
[20:37]  * Spaceman holds his hand up and admits he has never tried quassel
[20:37] <James147_> Spaceman: you mean it larger in size? cos thats not really a diffinative answer :p
[20:37] <James147_> genii: thxs :)
[20:38] <Spaceman> where does the quassel server section reside?
[20:38] <genii> Spaceman: In my case it sits on a machine in finland
[20:39]  * Gwen is proud: he has launched a convo \o/
[20:40]  * James147_ pats Gwen on the head
[20:40]  * Gwen shakes his tail
[20:40]  * Spaceman shakes Gwen's hand
[20:41]  * Gwen gave Spaceman something else than his hand ;)
[20:41]  * Spaceman is a very happy chap and starts sucking Gwen's lolly pop
[20:42] <Gwen> It's a strawberry one, you're lucky!
[20:42] <genii> !ot
[20:42] <Gwen> Ok, ok
[20:43] <genii> :)
[20:45] <Spaceman> to run the quassell server on another machine, would the pc have to run kubuntu/ an OS??
[20:45] <genii> Spaceman: Nope
[20:46] <James147> Spaceman: I dont see why, quassel is part of kde is it not? thus would work on any linux box that kde will
[20:46] <genii> Spaceman: Might want to enquire more in #quassel ... the devs for it are always hanging out in there
[20:46] <genii> James147: quassel is platform independent
[20:47] <Spaceman> I have some space with a webhost and I have been wondering if I could use it to stay connected to IRC?
[20:47] <Spaceman> it offers cgi/perl/php
[20:47] <Spaceman> I expect the answer is no
[20:48] <genii> Spaceman: Sounds like an ideal candidate for a quassel core. But then again, I'd suggest asking in their channel, or visit their website http://quassel-irc.org/
[21:34] <Jarkkimus> Whats wit the VNC in Kubuntu 9.04, I have tried all guides and howtos and the image is always all messed up! http://imagebin.org/64993
[21:35] <Jarkkimus> When I view the kubuntu desktop from windows with RealVNC the image is messed up....
[21:36] <Jarkkimus> That is, Kubuntu is the server and windozee is the client. My Gentoo server with realVNC server works just fine.. both of them have the same resolution than my windoze..
[21:42] <somekool> my /etc/init.d/mysql refers to a mysql_safe script in /usr/bin which is missing. am I missing a package?
[21:44] <genii> somekool: http://packages.ubuntu.com/search?searchon=contents&keywords=mysqld_safe&mode=exactfilename&suite=jaunty&arch=any
[21:45] <genii> I'm pretty sure mysqld_safe and not mysql_safe
[21:46] <somekool> thanks
[21:47] <kieron_> Helloooooooooo
[21:48] <genii> !pm | kieron_
[21:54] <nit> hello pple.... i am stuck tryin to mount a samba share ... anyone done it here?
[21:54] <somekool> genii: thanks. if I just rm /etc/init.d/mysql && apt-get install mysql-server-5.0 ; # it should reinstall no ? apt tells me the package is alreader at his newest version ...
[21:54] <James147> nit: what command are you useing to mount it?
[21:55] <nit> sudo mount -t smbfs //COMP/C /media/smb_drive0
[21:55] <genii> somekool: You can also use something like: sudo apt-get install --reinstall mysql-whatever
[21:56] <genii> nit: Try with cifs instead of smbfs
[21:56] <James147> nit: use cifs instead, its  ment to be replacing smbfs
[21:56] <James147> dam, you beat me to it :)
[21:56] <genii> Hehe
[21:56] <nit> yeah did that too...
[21:56] <nit> both times the error is "mount error: could not resolve address for COMP: No address associated with hostname"
[21:57] <genii> nit: You also seem to be missing the second part , which is where to locally mount it
[21:57] <James147> nit: try useing the ip of the server instead
[21:57] <nit> its my other window box....
[21:57] <nit> on dhcp...
[21:57] <genii> nit: eg: sudo mount -t cifs //COMP/C /media/smb_drive0  /SOMELOCALDIR
[21:58] <James147> genii: isent the /media/smb_drive0 the local drive?
[21:58] <nit> yeah
[21:58] <genii> James147: Oops. missed that space there...yes, my bad
[21:58] <nit> comp is the window box...
[21:58] <James147> nit: try replacing COMP with the ip of the computer.
[21:59] <genii> Work is done, I'm /away
[21:59] <nit> ...
[21:59] <nit> lemme try that...
[21:59] <James147> nit: also try adding -o user=USEROFTHESHARE
[22:00] <James147> nit: or guest if guests are allowed
[22:02] <nit> yeah trying to lookup the ip  using nmblookup...
[22:04] <James147> nit: cant you use ipconf?
[22:04] <James147> nit: or ipconfig ^^
[22:04] <James147> nit: carnt remember the command for windows :S
[22:07] <nit> james147: well its on a dhcp n/w
[22:08] <James147> nit: ^^ if you have access to the box ipconfig should tell you the ipadress it currently has
[22:08] <nit> yeah got it ...
[22:09] <somekool> genii: thanks(2)
[22:37] <leigh> hi
[22:44] <jerkman> hey, im having trouble getting amarok to sync artwork to my ipod ... anyone had this issue?
[22:44] <jerkman> ive submitted a bug but it could be something obvious
[22:46] <jerkman> interesting, covers dont seem to be grabable from amazon...
[23:19] <Gilboman007> any one around to help real quick
[23:21] <Gilboman007> wow all those people and no one around
[23:22] <James147> !ask | Gilboman007
[23:25] <nit> hey James147 m back...
[23:25] <James147> nit: Welcome back!
[23:25] <nit> so pple i have to use nmblookup in a script and i want the output ip in a variable .... how do i get it ...the grep or sed part... the standard op of nmblook will be like "querying comp on 192.168.1.255" and "192.168.1.4 comp<00>" in thenext line
[23:26] <nit> and i just want the second ip  add
[23:27] <James147> nit: hmm, this for the samba thing?
[23:28] <nit> yeah...
[23:29] <nit> James147: i get the current ip add by this ...
[23:29] <James147> nit: I'm sure there is an easier way :p is the ip static or can you make it static?
[23:31] <gilboman007> nvidia fx 5200 it wants me to change x config
[23:31] <gilboman007> is it because it is to old for this new stuff
[23:32] <nit> James147: no... too far down the food chain... no statics for us..
[23:32] <James147> gilboman007: what exatly is trying to make you change it? what command are you running?
[23:32] <James147> nit: hmm
[23:32] <gilboman007> desktop effects
[23:33] <James147> nit: you couldent get the mount to work with the hostname at all? try lowercase?
[23:33] <nit> James147: K...
[23:34] <James147> gilboman007: what version of kubnut are you running?
[23:34] <gilboman007> 9.04
[23:35] <James147> can you pastbin the contents of /etc/X11/xorg.conf?
[23:35] <nit> James147: nope ... again the no address associated with the host name
[23:36] <James147> nit: can you ping the ip and the hostname?
[23:38] <gilboman007> yup
[23:39] <James147> gilboman007: ??
[23:39] <gilboman007> i can access it
[23:39] <nit> James147:  i can ping the ip but not the host name..... though smbclient can resolve the host name
[23:39] <James147> !pastebin it please
[23:41] <gilboman007> --->noob
[23:42] <James147> !pastebin | gilboman007
[23:43] <James147> nit: just courious, why are you trying to mount the samba share?
[23:44] <nit> James147: so i can acess all those  music collections the guys have ... from rhythmbox...
[23:45] <nit> :P
[23:45] <James147> nit: dose his ip address change often?
[23:46] <ncfi1013_> i cant access my contacts in kopete. i cant update software sources in kpackagekit. adept keeps crashing. need help. suggestions, comments, thoughts, advice are all accepted.
[23:46] <gilboman007> http://paste.ubuntu.com:80/276617/
[23:46] <nit> yeah
[23:47] <nit> yet i mountedit using the ip address....
[23:47] <gtechnologix> hello
[23:47] <llutz_> nit NMBIP=$(nmblook | awk '/^[1-9]/ {print $0}')
[23:47] <nit> guess that will do for now
[23:47] <James147> gilboman007: try running "sudo nvidia-xconfig" it will setup xorg.conf
[23:48] <gtechnologix> does anyone know if limewire will run on kde
[23:50] <ncfi1013_> how do i know which ports to open on my router to enable kopete to work?
[23:52] <gtechnologix> it depends on what service your connecting to which port you would open
[23:52] <gtechnologix> for instance yahoo is port 80
[23:54] <ncfi1013_> so i access my kopete thru my yahoo im account so kopete would be the same port
[23:54] <ncfi1013_> ?