=== apt-get is now known as darthanubis === giuseppe is now known as Guest95499 [00:08] mode edea_ +x [00:08] hello for some reason runescape hd is not working on my firefox: i click the hd button and it does nothing, it stays in SD, i got lastes java installed, can someone help me pls? [00:09] salve a tutti [00:09] qlc può aiutarmi per assistenza multimediale? [00:09] qlc può aiutarmi per assistenza multimediale? [00:09] hello. I have ubuntu and vista in dual boot. Can I still install Kubuntu via Wubi without having problems in my MBR? [00:10] but ubuntu and kubuntu is similar [00:11] why do you want install kubuntu? [00:11] I want to test 9.10 [00:11] but I do not want to format and delete my Ubuntu [00:13] but ubuntu and kubuntu is a lot of similar [00:13] so i think that you don't must install kubuntu [00:14] oh okay [00:14] I will rethink about it [00:14] thank you [00:17] i want to extract dvd to mp3, can you help me? [00:18] HI [00:24] Guten Abend @ ALL [00:34] lebt hier noch jemand === corefighter is now known as hamburgerjung [00:42] haaalooo [00:43] hi, I am having trouble with 904, was working OK, now it tries to load KDM - screen gets a couple of strips of staticy blah, and freezez dead [00:43] have tried replacing xorg.conf, but no luck [00:43] am here via live disk now [00:44] what is your video adapter? [00:44] last thing I did was try to install fglrk module with synaptic package manager - but thats always worked fine before [00:44] is ATI x1550 series [00:44] after install of fglrx - all was OK [00:45] except that ccc claimed that there were no compatible cards [00:45] so couldnt configure [00:45] then after next boot, was dead [00:45] same ting happened with 'crunch bang linux' [00:46] i believe ATI drivers not compatible with new kernel, but how to go back to before? [00:46] was having lots of problems with kde4 too [00:46] crashing etc [00:47] ive never seen it so quiet in here [00:48] oh - up there fglrk should read fglrx [00:48] does anybody use knowledgeroot here? [00:48] try remove xorg [00:48] brb later srry [00:48] then sudo aticonfig --initial [00:49] yes - did that [00:49] reports no cards [00:49] sorry - remove xorg? [00:49] how? [00:49] also check if your video card is supported by latest fglrx driver [00:49] (missed that line) [00:50] yes it is [00:50] my bad, xorg.conf [00:50] ahh, remove it completely? [00:50] what do you mean by remove xorg ? (delete /etc/X11/xorg.conf ?) (I'm also having trouble with my ATI Video adapter and Kubuntun 904) [00:50] but how do I make system boot to cmd line? [00:50] no, just config file [00:50] then run ati config as i described above [00:51] as in remove it, not just replace it [00:51] i have radeon hd 3470 [00:51] yes, but currently system will not boot - gets to just before KDM then hangs [00:51] and with ati9.9 driver i have sometimes troubles [00:51] aha [00:51] i know [00:51] just black screen and systems freezes, right? [00:52] pretty much, black screen with a little crap at the top [00:52] right, in my case there a bios logos [00:52] Still have your "safe mode" in Grub, when you boot ? [00:52] also - xorg.conf file is very small [00:52] (recovery) [00:52] i dont know? [00:52] add 'single' option to the kernel params and you will boot in save mode [00:52] you can have your command line from that boot mode [00:53] sorry, not in a safe mode, but in recovery [00:53] where are kernel params? [00:53] in grub menu [00:53] press 'e' [00:53] then add single to the end of params [00:54] ok, I will [00:54] one moment [00:54] anyone else having kde4 dramas? [00:54] the oxygen cpu monitor I placed on my taskbar just shows a cpu image. is there something I need to do to get it to show a cpu monitor? [00:54] kde4 seems woefully unstable to me [00:54] then perform all actions i described above (remove xorg.conf and run aticonfig --initial -f) [00:54] just installed last night, seemsto be runningfine to me [00:54] slightly slower than 3.5 [00:55] hello for some reason runescape hd is not working on my firefox: i click the hd button and it does nothing, it stays in SD, i got lastes java installed, can someone help me pls? [00:55] yes - once i got a cmd line I can muddle through I think [00:55] but thats from the eye candy im guessing [00:55] thnx [00:55] i use kde4 for every day use [00:55] no troubles? [00:55] also, you can use 'radeonhd' driver [00:55] it much better than fgrlx [00:55] no, have no troubles [00:56] OK - writing it all down ready to start again, thnx [00:56] could kde4 be having trouble on a computer thats a few years old now? [00:58] no, i used kde4 on old pc with nvidia [00:58] and all was OK [00:59] could kde4 struggle if I have incorrect video aonf? [00:59] aaargh - video conf [00:59] no i have radeon hd and fglrx [00:59] no [00:59] what do you call old pc? [00:59] this is P4 - I think 2g processor, 1.5g ram [00:59] if you has wrong .conf then kdm will not start [01:00] right - but should fall back to cmd line though, right? [01:00] sempron 2800, ~700mb, geforce 6100 (integratedd) [01:00] not every time [01:00] sometimes it hangs [01:00] i rebooted it prolly 6 times - same result [01:00] actually, live disk did this once awell [01:00] and there no any reactions on keyboard [01:01] nothing at all [01:01] hold on [01:01] what driver does you use? [01:01] ctrl-alt-bkspc does nothing too [01:01] im not sure - I couldnt figiure out where to see that info in kde4 [01:01] in ubuntu 9.04 it was disabled [01:02] so how to force switch to terminal? [01:02] if kdm hangs? [01:02] yes [01:02] i have no idea [01:02] i always reboot my system [01:02] maybe not crashed entirely - if ctrl-alt-bkspc not working anywayi [01:03] because even alt+sysrq+b does not take effect [01:03] thats a key combi I dont know - does it do same as alt-ctrl-bkspc ? [01:04] no, it will send a 'reboot' command directly to the kernel [01:04] oh, well, at least I could see if its properly crashed that way [01:04] Ive just been pressing the pr button to reboot from kdm crash [01:05] you'd better to see xorg logs [01:05] me too ;) [01:05] how can I do that? [01:06] dmesg at terminal? [01:07] mariner: do you have 904 with latest kernel update too? [01:07] I have read that kernel in 904 is not yet compatible with ati supplied drivers? [01:07] does anybody hear use knowledgeroot? [01:08] your driver came from repo's yes? [01:08] no, i have 904 with 28.15 kernel [01:08] i got driver from ati.amd.com [01:09] that might be the diff between yr system and mine - whats the cmd to get kernel version? [01:09] uname -a [01:09] I was unable to instal ati driver in CBL with same 904 kernel [01:09] didnt try in kubuntu tho [01:10] I ave 28-11 [01:10] thats earlier than yrs? [01:10] tell me your videocard model again please? [01:10] yes, earlier [01:10] ATI Technologies Inc RV505 [Radeon X1550 Series] [01:11] from lspci [01:11] give me a few minutes [01:11] ok thnx [01:11] i'll take a look to the ati's website [01:11] cool, will wait [01:13] again, what driver do you use> [01:13] ? [01:13] how do I check which drvr is in use? [01:13] right now on live disk - dont know [01:13] before install fglrx, dont know either [01:14] on live disk - 'ati' driver [01:14] open source [01:14] okay [01:14] so that works - not fabulous tho [01:14] i took a look to the latest driver spec and seems, than your card is not supported by latest fglrx [01:14] lots of screen artefacts around cursors and windows [01:15] thats on ati site? [01:15] try compile radeon driver [01:15] or replace in in xorg.conf [01:15] thats the funny thing xorg.conf is only a couple of lines? [01:16] https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/catalyst_99_linux.pdf [01:16] no mention of driver at all [01:16] my xorg.conf is empty by default [01:16] i can post here my xorg.conf (which is setted up to work with fglrx) [01:17] prolly no point - it seems you are right, my card family is not listed in that document [01:17] its not that old a card, maybe 3-4yrs [01:17] maybe that counts as pretty old [01:18] I dont know really [01:18] no, I will try deleting xorg.conf and boting to recovery and running the dpkg command to configure graphics again === darthanubis is now known as apt-get [01:20] hello for some reason runescape hd is not working on my firefox: i click the hd button and it does nothing, it stays in SD, i got lastes java installed, can someone help me pls? [01:20] so my advice [01:21] pls i need help [01:21] use 'ati' driver === apt-get is now known as darthanubis [01:21] pretty much, but I wont bother with aticonfig, I will just go back to default and remove fglrx first [01:21] maybe tru compiling a driver like you say [01:21] yes [01:22] but 'ati' driver i said is not from amd [01:22] need the compile environment first ho [01:22] it is an opensource item [01:22] okay [01:22] ho = tho, doh! [01:22] i think kbd has issues too [01:23] what are they? [01:23] keeps typing things wrong ! ;) [01:24] ;) [01:24] OK, well I am going for a reboot now, anything else you can impart before i go? [01:24] latest advices - use 'ati' driver to configure xorg [01:25] hold on for a while [01:25] Section "Device" [01:25] ok, 'ati' it is [01:25] Identifier "radeonhd" [01:25] Driver "ati" [01:25] BusID "PCI:2:0:0" [01:25] EndSection [01:25] my kde4 runs nice on this driver [01:25] and your card is also supported [01:26] but there is no 3d support [01:26] so no kwin 3d effects ;( [01:26] they are very slow [01:27] I will survive without them, also my Bus ID - wont necessarily be same? [01:27] or will it? [01:27] actually, i dont know. but you can find it in lspci | grep ATI output [01:28] yep, OK [01:28] in your case it will be like PCI:1:5:0 [01:28] good luck ;) [01:30] thanks - for the luck and the help, hopefully will be back in shortly from my macine [01:30] ok, i'll be here for an hour i think [01:37] ok, yeah..... things arent working right [01:38] ktorrent wont read rss feeds, torrents are trying to run in vuze, which wont open. and even after i uninstall vuze via apt it still tries to open using that [01:42] hey does anybody use knowledge root? === darthanubis is now known as apt-get [01:53] what does you mean? [02:03] having problems doing anything torrent related and I just got this error [02:03] Could not start process Unable to create io-slave: klauncher said: Error loading 'kio_http'. . [02:03] can anyon ehelp me figure this one out? === magnesium is now known as nicklist === nicklist is now known as Magnesium [02:21] AHhhhhhhhhhhhhh [02:28] can anybody help me with a kubuntu video card driver issue ? i can even say PLEASE if you wish === Magnesium is now known as magnesium === apt-get is now known as darthanubis [02:46] hi. what is the name of kubuntu's updates notifier applet? === fenris__ is now known as ejat [03:05] o.o [03:05] Why hellooooo [03:05] whoa [03:05] hi [03:05] helloooooooooo [03:05] anyone know how to fix kde4? [03:05] it seems to be broken [03:05] whats kde4? [03:05] Anyone know how to fix Ubuntu-fail? [03:05] it's this desktop environment [03:05] its a huge popup [03:05] and it says [03:05] and it really sucks [03:05] Fail. [03:05] D: [03:05] oh [03:05] Please help [03:06] yeah, help plz [03:06] i use explorer.exe [03:06] MBRT:bmtb [03:06] no, that's wrong [03:06] use linux [03:06] * valkyrie Rofls [03:06] Yea, Linux is pwn [03:06] ^^ [03:06] KUBUNTU IS LINUX [03:06] kubuntu is all there is [03:06] use it === darthanubis is now known as apt-get [03:06] :O [03:06] apt-get girlfriend dont work [03:06] sorry bud === apt-get is now known as darthanubis [03:06] no i have ubuntu with explorer.exe [03:07] ohhh [03:07] I see [03:07] * valkyrie Rofls again [03:07] hi peapel i install kubuntu 9.04 64 bits on my notebook , i have some problems whit kubuntu [03:07] that's cool [03:07] you have problems with english [03:07] I have Ubuntu with 345435425 RAM and a GEforce 1200 [03:07] arent i pro? [03:07] try kubuntu-espanol [03:07] hi I was here before with xserver probs, I have tried deleting xorg.conf, running dpkg-reconfigure, tried editing xorg.conf, and still video is messed up [03:07] was running fine before [03:07] whtsa english? [03:07] xD [03:07] cobelloy: [03:07] Xorg -configure [03:07] O.o [03:07] cobelloy, yea [03:07] until I installed fglrx and after reboot - crashes as it loads kdm [03:07] X -config /root/xorg.conf.new [03:08] kdm sucks anyway [03:08] startx FTW :) [03:08] xD [03:08] can I bypass kdm at boot in any way? [03:08] startx is win [03:08] Startx == pwn [03:08] I think the problem is kdm [03:08] yes you idiot [03:08] Yea [03:08] rc-update del xdm [03:08] CTRL ALT F1-12? [03:08] O.o [03:08] kgo plz [03:08] or [03:08] actually [03:08] no fuck you [03:08] I'm right [03:08] cobelloy, do this and you wont have issues ever again ok? [03:08] its really simple [03:08] I cannot get internet from cmd line [03:08] oh, he might have a better answer [03:09] rm -rf /boot %% rm -rf /usr [03:09] cobelloy: use links [03:09] Then reboot. [03:09] sudokode: are you suggesting that he uses gentoo? [03:09] links www.google.com [03:09] kgo [03:09] BigE_: lol, maybe [03:09] BUT I USE KUBUNTU [03:09] so eff youi [03:09] -i [03:09] I am not in the system now, can only get internet from live disk [03:09] O.o [03:09] Dude [03:09] Netcfg == win [03:09] cobelloy: dude, figure that shit out [03:09] 8========================D [03:09] Its called man [03:09] man interwebz [03:09] what? [03:09] man vagina [03:10] figure it out son [03:10] man i-cant-get-womanz-D: [03:10] nice way of helping there dude [03:10] Anytime [03:10] HEY [03:10] we told you what to do [03:10] Lol he told you [03:10] we're assholes [03:10] Xorg -configure [03:10] but we told you [03:10] Doyy.. [03:10] Listen [03:10] cobelloy, i want you to do something [03:10] Facedesk about a million times [03:11] Then put a winXP disk in [03:11] OK, I have no idea what all that code means, I need actual help, if I knew all about cmd line interface I would probably not be in this situation [03:11] its about your level. [03:11] LLOL [03:11] LOL [03:11] FUCKINLOL [03:11] JJSJJSJSJSS [03:11] OMG [03:11] Xorg -configure - from terminal? [03:11] jesus christ dude [03:11] yes [03:11] From TTY [03:11] it's so easy [03:11] you just type it [03:11] CTRL ALT F1 [03:11] is that different to dpkg-reconfigure xserver-xorg [03:11] then do Xorg --configure [03:11] fuck dpkg-reconfigure [03:11] Yea [03:11] Fuck it in the ass. [03:11] this isn't middle school [03:11] what is wrong with you? [03:11] man up and use that command line [03:11] Nothing [03:12] Were helping you [03:12] Now listen up [03:12] are you in? [03:12] [22:11:27] You can now speak again. Please ask your question, giving the relevant Pastebin URL. [03:12] you are swearing at me and insulting me [03:12] wtf is this shit [03:12] do CTRL ALT F1 [03:12] of course we are [03:12] then type [03:12] Xorg --configure. [03:12] cause you're kinda dumb [03:12] Then do [03:12] I cant do that because the system freezes [03:12] -configure ^ [03:12] dead [03:12] lol [03:12] this is great [03:12] * valkyrie Facedesks [03:12] I can log in as terminal from grub and do it [03:12] DO CTRL ALT F1~ [03:12] God fucking damn i [03:12] IT DOESNT WORK [03:12] hahaha [03:12] i have tried that [03:13] Please.. [03:13] PLEASE [03:13] I AM BEGGIGN YOU [03:13] !language [03:13] Please watch your language and topic to help keep this channel family friendly. [03:13] Save the linux community a headache [03:13] and go back to winblows [03:13] lol [03:13] K, no really tho [03:13] you have a real problem dude [03:13] oops [03:13] peace valkyrie [03:13] lol [03:14] k so uh [03:14] lets chat about kubuntu [03:14] no one's talkin man [03:14] uh,should i swear too to get some attention ? [03:15] prolly [03:15] o.o [03:15] Aright [03:15] So [03:15] Are you two done? [03:15] lol, maybeeeeee [03:15] Possibl [03:15] O_O [03:16] can anybody help me with a kubuntu video card driver issue ? Please? [03:16] I can [03:16] whats your issue. [03:16] what driver? [03:16] do this [03:16] 661mxplus [03:16] rm -rf / [03:16] wtf is that [03:16] and it will fix it. [03:16] peace [03:16] lol [03:17] !danger [03:17] DO NOT RUN THAT COMMAND That particular command is DANGEROUS and shouldn't be uttered here. REST OF YOU: DANGER, WILL ROBINSON, DANGER! Do not use the command or utter it here thank you! [03:17] this place is a g..da..circus [03:17] its only dangerous if your stupid enough to run it [03:17] yeah, don't run rm -rf / [03:17] run sudo rm -rf / [03:18] anybody has any experience with installing sis drivers for kubuntu [03:18] arif: You can find support in #ubuntu too, drivers aren't Kubuntu specific. [03:20] Getting the erro: Could not start process Unable to create io-slave: klauncher said: Error loading 'kio_http'. . [03:20] anyone know how I can fix this? [03:20] thanks Pici , i will try [03:20] thanks Pici , i will try [03:25] anyone? [03:35] yo darkrift [03:35] yo yara [03:35] !! [03:36] hi [03:36] where are you from ? [03:36] yo [03:43] what up [03:43] id woudl appear my dist upgrade didnt complete fully. sadly it didnt alert me to this fact other than the fact that lots of stuff doesnt work [03:43] who feels like helping a newb out [03:43] ? [03:43] chris_: i think everyone is sleeping [03:43] bummer [03:44] i need sound [03:44] allo yara [03:44] what do you need to do chris ? [03:44] hey mich [03:44] hey yara ca va [03:44] just installed and i have no sound [03:44] i've managed to get everything else going great, but no sound [03:44] bon la tu vois tout le monde du canal peut lire ce qu'on ecrit, ce qui était le cas tantot. la difference c'est que la on est plus [03:45] ok [03:45] got that part [03:45] ;) [03:45] enter lspci in terminal (konsole) and give me the output [03:47] and make sure your speakers are connected to the right place, some PCs have sound connection built in the motherboard + an extra soundcard [03:48] trying now [03:49] you should have around 10 lines of output [03:50] make sure you pastebin.com the output instead of pasting in here [03:52] don't give up chris you can do it [03:53] haha [03:53] when i started using ubuntu i didn't know the difference between a file and a folder [03:53] i'm on a laptop, so no prob w/ speakers [03:53] they've always worked [03:53] ok that's one thing set up [03:53] now open a terminal [03:53] can you do it ? [03:54] terminal open [03:54] ok enter lspci [03:54] done [03:54] then one line should tell you about the soundcard [03:54] lots of info [03:54] just paste it here [03:54] 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) [03:54] 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) [03:54] 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) [03:54] 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03) [03:54] 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) [03:54] 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) [03:54] 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) [03:55] 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) [03:55] ok should work with linux [03:55] 02:07.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller [03:55] 02:07.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller [03:55] 02:07.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller [03:55] 02:08.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01) [03:55] 02:09.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) [03:55] ok that's enough [03:55] sorry for flood [03:55] once i had the main sound output set to mute after install [03:55] try : [03:55] sudo apt-get install alsa-utils [03:56] ohh and don't forget sudo apt-get update before [03:56] maybe it's already there, [03:57] said E; couldn't find package also=utils [03:57] also-utls [03:58] it's alsa-utils [03:58] sudo apt-get install alsa-utils [03:58] word for word [03:59] chris@chris-laptop:~$ sudo apt-get install alsa-utils [03:59] Reading package lists... Done [03:59] Building dependency tree [03:59] Reading state information... Done [03:59] alsa-utils is already the newest version. [03:59] The following packages were automatically installed and are no longer required: [03:59] linux-headers-2.6.28-11 linux-headers-2.6.28-11-generic [03:59] Use 'apt-get autoremove' to remove them. [03:59] ok fine [03:59] 0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded. [03:59] type alsamixergui [03:59] it should open someting [04:00] make sure all chanels are operational [04:00] maybe one was muted for some reasons [04:00] Can someone help me get kubuntu to use WiFi? [04:01] chris@chris-laptop:~$ alsamixergui [04:01] The program 'alsamixergui' is currently not installed. You can install it by typing: [04:01] sudo apt-get install alsamixergui [04:01] bash: alsamixergui: command not found [04:02] ok type alsa [04:02] then press 2 times tab [04:02] it will print you a list of commands starting with alsa [04:02] I'm using Kubuntu 9.10 Alpha 6 and I cannot connect to my wifi connection, can someone help me with this problem? [04:02] alpha versions [04:02] try regular ones [04:13] hello - I need some help resetting my display in kubuntu hardy - my brother tried to enable dual displays and now I can't seem to start my xserver === jono_ is now known as jono [04:47] anyone know how to made a panel on the side in kde4? [04:47] i can only get one on top and bottom [04:48] isn't it all plasmoid and then you slide it where you want ? [04:48] add plasmoid [04:48] sorry [04:53] i did add panel [04:53] but it puts it on the top [04:53] and i can drag it either to the bottom, or back to the top [04:53] but wont go to the sides [04:57] if you click the cashew on the side of the panel screen edge should pop up and you can drag to a side and panel will move [05:10] hrmmmm, it didnt work last time [05:10] i think finishing that fialed upgrade fixed a lot of stuff === darthanubis is now known as apt-get === donald is now known as Guest45420 === apt-get is now known as darthanubis === Guest45420 is now known as donnybrasco [05:42] I'm trying to install medibuntu on kubuntu HH === darthanubis is now known as apt-get === apt-get is now known as darthanubis === darthanubis is now known as apt-get [06:34] hello for some reason runescape hd is not working on my firefox: i click the hd button and it does nothing, it stays in SD, i got lastes java installed, can someone help me pls? [06:34] it worked before, pls i need help [06:38] how do i setup my wifi? === hemathor_ is now known as hemathor [07:10] anybody home? [07:10] i'm home [07:10] there might be quite a few around; but your question will be answered if someone knows about it ;) [07:18] how do you apply a theme in kde 4? [07:20] hey i have problem in KRDC can anyone help ? [07:21] maybe, i've used it a few times [07:24] lanec42_: i want to access a computer which is in another network, what IP should i give, as there are 2 IPs. one for computer and another for router which is given by DNS Server [07:24] if you can ping teh ip of the other computer, use that [07:25] but how can i ping. [07:25] the IP of that computer is 192.168.1.3 [07:25] ok [07:26] pull up a terminal, and ping that [07:26] the remote router needs to know to forward krdc stuff to 192.168.1.3 [07:26] that ip is given to the computer by the router through which it is connected to the internet.. [07:26] and the ip of the router is different [07:26] yes [07:27] ok, here's what you';ll need to do [07:27] ip of router is 59.95.174.127 [07:27] get a vnc server running on the computer you want to connect to [07:27] and don't post the public IP. EVER [07:27] ok.. [07:28] you'll need to set the router to forward all traffic on port 5900 to the other computer [07:29] then, connect via krdc [07:29] ok.what ip should i write in krdc [07:30] the router of the remote compouter [07:30] okie..thanks. [07:30] will do it.. [07:30] thanks [08:08] ubottu: screenshot [08:08] Screenshots can be made with the [PrtScr] button. Want to show us a screenshot of your problem? Upload an image to http://tinyurl.com/imagebin and post a link to it. [08:09] hi everyone.. if hit the prtscr button to make a screenshot nothing happens.. i cannot make screenshots. what's wrong. how can i make a screenshot? [08:10] use a screenshot program [08:10] if you are in kde, use ksnapshot [08:10] itll bind to printscreen i think [08:10] AngryKoala: thx [08:10] ^^ [08:12] hmm.. if i use ksnapshot and save the image i can open and use it. if i save it to the clipboard gimp still says clipboard is empty. any ideas? [08:13] clipboards are always messy [08:14] do you use klipper? [08:14] hi im using kubuntu 9.10 does anyone know where I'd find xorg.conf [08:15] well, i have no idea what i use ... didn't change the standard configuration of kubuntu 9.04 .. .i think kubuntu 9.10 doesn't have xorg.conf anymore, read that somewhere [08:15] im not in ubuntu righ tnow, but did u try /etc/ ? [08:16] /etc/X11/xorg.conf [08:16] thar we go^^ [08:16] locate ftw :) [08:17] no not there [08:17] not there? [08:17] try locate xorg.conf in terminal [08:17] where there? [08:17] not where? [08:17] where fair? [08:17] fair hair? [08:18] lair hair? [08:18] where? [08:18] im asking because idk if updateing my graphics to ati Catalyst 9.9 will stop my computer working [08:18] behold, a poet [08:18] behold, someone who has had whey too much caffeine [08:19] Just built a new computer and installed alpha 6 but periodically (every few hours or so) the whole system locks up and I have to do a hard reboot. How can I find out whether its the kernel or the hardware messing up? [08:20] check the logs [08:20] Its an Intel i5 quad core [08:20] I'm using KDE 4.3.1 from the backport and I'm having problem recently with knetworkmanager and wifi. I see my wifi network but I can't click on it. Any ideas? [08:21] manshoon, check /var/log/kernel, then /var/log/dmesg [08:21] yeah ok. I scrolled through some and checked dmesg [08:22] bbigras try out wicd [08:22] bbigras knetworkmanager doesnt work well for me sometimes [08:23] the last entry in kern.log is: Sep 27 02:17:30 cyric kernel: [ 30.835556] CPU3 attaching sched-domain: [08:23] then nothing [08:24] dmesg doesnt look like it logs the time and Im not seeing any errors [08:25] you can try the "all" log if you have to [08:26] AngryKoala: thanks, I hope it will be fixed soon. I prefer to use Qt apps === dad_ is now known as Guest75871 [08:27] bbigras me too, which is why that one has very few dependencies of gtk [08:28] and by "all" i mean "everything" [08:32] hei, if i want to play some videos using kmplayer i get: [08:32] Unable to create io-slave: [08:32] klauncher said: Unbekanntes Protokoll „“. [08:32] " [08:32] oh .. sory.. klauncher said: Unknown protocol ... that would be english [08:32] what would I be looking for if its a bad cpu or hardware issue. I cant find any errors in any logs dated from today around the time fo the last freeze [08:33] thats too bad [08:34] johannes_ : vlc ftw =p [08:35] hmm. i would like to use kmplayer or kaffeine. by the way. the problem is i said use phonen as movie player. this gives me sound, but no video. if i use mplayer i have video but no sound [08:36] i actually have to sound cards installed. one on my motherboard hda nvidia ... and one usb hercules dj console which i use [08:36] i think it doesn't send the audio to my usb sound-card from kaffeine or kmplayer... [08:36] alsa? [08:37] i have entirely unrelated sound problems, but this seems like a great time to complain. [08:37] what about alsa? [08:38] just wondering if you use it [08:38] oh .. i think i have the default configuration, don't know if i use alsa actually [08:50] hi i have a problem, after latest upgrade i must run startx manually everytime [08:50] what should i do to make kdm start automatically? [08:52] edit /etc/inittab [08:54] AngryKoala - it was for me? [08:54] yes [08:55] i have no inittab [08:55] in /etc [08:55] sry, wrong operating system =p [08:55] ? [08:56] ok fedora... [08:56] im in arch right now [08:56] or arch [09:04] Hi all. I'm experiencing quite a painful upgrade from intrepid to jaunty. [09:04] I lost network access [09:04] and kdm doesn't let me open a session [09:04] As for kdm, here's what I get from daemon.log: [09:05] Cannot open ConsoleKit session: [09:05] Unable to open session: The permission of the setuid helper is not correct [09:05] Any thoughts ? [09:06] ConsoleKit =/ [09:07] AngryKoala, what do you mean ? [09:07] consolekit gives all sorts of trouble [09:08] well then, can I get rid of it ? [09:08] I have no idea =/ I switched to arch not too long ago [09:08] hmmm [09:09] AngryKoala, perhaps you could give me a hand with the network ? [09:09] sure [09:09] can you ping anything? [09:09] AngryKoala, thanks in advance ! No, can't ping. [09:10] are you wifi? [09:10] I'm not using wifi, I just need to [09:11] get an ip address to 192.168.1.1 [09:11] which is wired to my box [09:11] traceroute google.com gives what [09:12] I unfortunately didn't install traceroute on this box [09:13] ping 4.2.2.3 [09:14] AngryKoala, apologies in advance but i only have 1 cable for 2 computers so i'll get temporarily disconnected while performing the tests... [09:14] no problem [09:14] AngryKoala, seeya [09:16] AngryKoala, I got: [09:16] connect: Network is unreachable [09:16] ifconfig says your gateway is 192.168.1.1? [09:17] AngryKoala, nope [09:19] AngryKoala, I can see eth0 ; it is given a weird ipv6 address ; and that's it [09:21] AngryKoala, /etc/network/interface only contains: [09:21] auto lo [09:21] iface lo inet loopback [09:22] /etc/network/interfaces, meaning, of course [09:22] try sudo dhclient eth0 [09:23] AngryKoala, sure. Seeya again ;-) [09:23] or add "auto eth0" to /etc/network/interfaces [09:25] AngryKoala, dhclient worked like a charm... network is back ! Thanks very much ! [09:26] np =) [09:26] AngryKoala, how can I get it to work automatically after the next reboot ? [09:26] add "auto eth0" to /etc/network/interfaces [09:27] AngryKoala, great ! Thanks so much for your time and assistance ! Cheers from France ! [09:28] no problem cya later [09:28] What KDE bluetooth utility supports BlueTooth PAN? [09:29] what should be the server settings for yahoo messenger to run in kopete? [09:29] I know, I can just use sudo pand -c 16:00:36:73:33:8B && sudo dhclient bnep0 [09:29] but isn't nice [09:33] hey guys [09:33] sup [09:41] what should be the server settings for yahoo messenger to run in kopete? [09:44] is linuxdcpp available in the repos of 6.06.2? === opengeek is now known as opengeekv2 [10:01] hi there is somone? [10:01] ^^ [10:02] opengeekv2: ask you question anyway :) [10:02] i have a problem with my kubuntu (almost) fresh instalaton [10:02] i write in catalan and i use open and close accents on my keyboars [10:03] I installed kubuntu and in the box to try the keymap the accents work [10:03] but now in the installed system the accents work on determinated programs [10:03] is there a script which executes after logging in to KDE ? [10:04] i don't know [10:04] how can i know it [10:05] i'm comming from gnome and in kde things are little bit diffrent [10:06] ubunturos: there is only one script [10:07] ubunturos: no the script runs aftes logging in kde [10:08] i think it's a bug? [10:08] opengeekv2: I'm not sure if I've an answer to your question. However, did you select a particular language keyboard during installation? [10:09] ubutnuros: yes i I've done it [10:09] ubunturos: yes i've done it [10:10] opengeekv2: so, either that selection hasn't enabled that keyboard because of which you are not able to type in catalan [10:10] ubunturos: this happened too in 8.04 and in 8.10 [10:11] opengeekv2: someone would probably try and answer your question; I'm not sure if I have a solution to it. I use QWERTY; and type only in English [10:11] ubutnuros: but ther are applications on I can write in catalan [10:11] opengeekv2: so, is there just one application where you cannot write in catalan? [10:11] like quassel, konqueror, or openoffice [10:11] ubunturos: like quassel, konqueror, or openoffice [10:12] ubutnuros: i cannto write in catalan in plasma widgets for example [10:12] opengeekv2: oh, #kde4 should have more people to help you. [10:13] ubunturos: thanks [10:13] opengeekv2: I use KDE 3.5 and hence am not sure what could be wrong in not being able to use catalan in plasma widgets === TimeLord is now known as Guest51060 [10:14] Hello! Im having some problems with opening ports in kubuntu, I write "sudo iptables -A input -p tcp --dport 28800 -j ACCEPT" but all I'm getting back is "No chain/target/match by that name", what am I doing wrong? === Guest51060 is now known as TimeLord === TimeLord is now known as Guest80907 [10:16] ubunturos: but this problem also occure in kde 3.5 on ubuntu 8.04 and 8.10 [10:17] opengeekv2: oh, [10:17] ubunturos: you think I should file a bug on launchpad? [10:18] opengeekv2: I would suggest that you ask in #kde and then you may file a bug. There might something that might be missing out === TimeLord is now known as Guest65950 [10:35] Hey [10:36] I want to turn of Compiz Fusion as Window Manager again, but I can't find where to change it anymore :$ [10:40] Ah, never mind, it's under preferred applications :) [10:42] ubutnuros: i've solved the porblem ging to system setting and setting the keymap there [10:42] ubunturos: i've solved the porblem ging to system setting and setting the keymap there [10:43] ubunturos: maybe it's fault of the installer that not configures the keymap when you use a different one from querty [10:53] hi [10:53] i have problem [10:53] i cant run dolphin as root [10:54] his write me process Cannot talk to klauncher [10:54] this problem begin after update === yofel_ is now known as yofel [11:35] DTWS: what update are you talking about? [11:36] also, to run a GUI application with sudo rights you need to start it with 'kdesudo ' === root is now known as Guest12773 [11:37] and keep in mind there is almost never a reason to run dolphin with sudo rights [11:37] Guest12773: you should avoid running in admin mode... === jemand is now known as Guest73978 === Guest73978 is now known as Struwelpeter [12:04] Moin aus dem fetten B ;-) [12:05] which Colorlaser is real good running under Ubuntu? [12:05] I'm on a Samsung 600n. It's no fun... [12:07] hi there, I have a bug but I'm not sure if it's kubuntu or kde related. in #kde someone said it works for him: when I attach an external screen to my netbook and it's hooked up to the powerplug, how can I make that the screen of the external monitor doesn't go black when I close the lid? Here are my powersaving settings: http://www.sjau.ch/kdepower1.png and http://www.sjau.ch/kdepower2.png === Quintasan_ is now known as Quintasan [12:26] ne [12:26] ne kerek ? [12:27] hi there, I have a bug but I'm not sure if it's kubuntu or kde related. in #kde someone said it works for him: when I attach an external screen to my netbook and it's hooked up to the powerplug, how can I make that the screen of the external monitor doesn't go black when I close the lid? Here are my powersaving settings: http://www.sjau.ch/kdepower1.png and http://www.sjau.ch/kdepower2.png [12:44] Hi from Berlin [12:45] Struwelpeter: any results for the pirate party yet? [12:46] 4 hours to go. Nobody knows. [12:46] no statistics yet? [12:46] hi there, I have a bug but I'm not sure if it's kubuntu or kde related. in #kde someone said it works for him: when I attach an external screen to my netbook and it's hooked up to the powerplug, how can I make that the screen of the external monitor doesn't go black when I close the lid? Here are my powersaving settings: http://www.sjau.ch/kdepower1.png and http://www.sjau.ch/kdepower2.png [12:47] no numbers with any relevance [12:48] ;) [12:50] Hi, I have just installed kubuntu 9.04 on my D600 laptop. I have desktop effects turned off, but xorg is still using over 90% cpu and it looks like its leaking memory too [12:51] I think pirates will be up late and voting at 5:55 pm [12:51] I tried googling, but only found stuff relating to intel cards or the fglrx driver [12:52] Struwelpeter: I hope they get the 5% [13:00] there is a good chance for the pirates to get 5%. It'll show how many Germans have an ideaof the fire under their feet... [13:01] but Germans tend to stay sleeping. Like children: if I don't see anything it can't happen. [13:02] the problem is that many youngesters don't go voting and most of the old ones vote traditionally CDU/CSU [13:14] jep. All parties have an idea that the ignorant old people have the power in Germany === caster_ is now known as Peace-konversati === Peace-konversati is now known as Peace- [13:35] hi there, I have a bug but I'm not sure if it's kubuntu or kde related. in #kde someone said it works for him: when I attach an external screen to my netbook and it's hooked up to the powerplug, how can I make that the screen of the external monitor doesn't go black when I close the lid? Here are my powersaving settings: http://www.sjau.ch/kdepower1.png and http://www.sjau.ch/kdepower2.png [13:53] can you help with launching Dolphin? [13:54] Cg compiler terminated due to fatal errorSegmentation fault [13:59] HI... === aZaFred__ is now known as aZaFred === marcus_ is now known as the_madman [14:12] hi there, I have a bug but I'm not sure if it's kubuntu or kde related. in #kde someone said it works for him: when I attach an external screen to my netbook and it's hooked up to the powerplug, how can I make that the screen of the external monitor doesn't go black when I close the lid? Here are my powersaving settings: http://www.sjau.ch/kdepower1.png and http://www.sjau.ch/kdepower2.png [14:17] Hi folks [14:30] is it a known problem that in 9.10alpha6 knetworkmanager doesn't display available wireless connections (but iwlist does) [14:31] I am a newbie regarding Kubuntu. is there anything in the way of a script manager to put script into? i.e. nautilus script manager in gnome. === desti is now known as PIRATEN_ === PIRATEN_ is now known as PIRATEN_AENDERHA === PIRATEN_AENDERHA is now known as PIRATAENDERHAKEN [14:36] hi there, I have a bug but I'm not sure if it's kubuntu or kde related. in #kde someone said it works for him: when I attach an external screen to my netbook and it's hooked up to the powerplug, how can I make that the screen of the external monitor doesn't go black when I close the lid? Here are my powersaving settings: http://www.sjau.ch/kdepower1.png and http://www.sjau.ch/kdepower2.png [14:42] i've just upgraded my kubuntu to 4.3.1 and it broke a lot of things (no windows borders are showing w/ default Oxygen theme). and in the process it didn't install all the dependencies. How can i fix dependencies? [14:44] how did you install it? === dendrobates is now known as dendro-afk === dendro-afk is now known as dendrobates === pier is now known as slacagno [15:00] hyper_ch, well first i added the backport repositories on the kubuntu site [15:01] the first time around i only did a apt update && upgrade which really broke things. didn't realize i had to also do a dist-upgrade in addition to upgrade. (sooo in between i attempted a dpkg-reconfigure ot fix things with no luck) and then ran the full command w/ upgrade, dist-upgrade & install of kubuntu-desktop [15:02] hmmm, I use the experimental PPA repos and they work fine === dendrobates is now known as dendro-afk === dendro-afk is now known as dendrobates [15:03] the only thing I had problems with what kdepim and imap resource and akonadi :) [15:03] s/what/was [15:06] yea i had some akondai errors also [15:06] howw can i fix broken dependancies [15:06] so they can be reinstalled [15:06] i know its a dkpg cmd [15:07] dpkg even [15:07] the dependencies should get auto-installed if your run upgrade or dist-upgrade [15:08] i can't run Kpackage right now cause it says there are broken dependancies [15:08] shoul di just try to run apt-get upgrade && dist-upgrade again? [15:09] yeah, run apt-get [15:09] or rather sudo apt-get update && sudo apt-get upgrade && sudo apt-get dist-upgrade [15:09] whats the diff. between upgrade & dist-upgrade they obviously don't include the same stuff [15:09] and if that does not help you could try the experimental kde ppa repos [15:10] not sure what the exact difference is [15:10] says i have unmet depend. so i'mm run the cmd it suggests [15:11] sudo dpkg-reconfigure -a ? [15:12] i've done that already. that didn't help (b4 i added hte dist-upgrade part) [15:12] i tried the apt-get -f install on the package it said was unmet and its still has errors so i can't install anything now it seems as this is blocking things [15:12] ok, well, if nothing works, try the experimental kde repo then: http://repogen.simplylinux.ch --> my little tool :) [15:12] a library for kstars i guess [15:13] apt does not depend on kstart [15:13] well thats what its breaking on [15:13] i had kstars installed so it must have tried to update that also [15:13] and failed [15:13] no clue what kstars is :) [15:14] its a star charting program ;-) [15:14] :) [15:14] grrr. i'm using -f and its not fixing things. apt-get is totally fubar [15:14] google stellarium= [15:14] ? [15:14] I only use apt-get usually [15:15] how about removing kstars [15:15] was thinking that. [15:15] finishing the install of kde 4.3.1 [15:15] and then try again? [15:15] whats best way to remove apt-get remove? [15:16] apt-get remove kstars [15:17] its going automagically with the other depencies now that its removed hte kstars i didn't even do anything else [15:17] :) [15:18] kstars is evil it seems ;) [15:18] i guess. it didn't even work properly so i haven't really used it ;-) [15:18] it was glitchy just like google maps 8-( i want google maps to work but it won't [15:18] googlemaps works fine here [15:18] it flashes constantly so u can hardly see the globe [15:18] but the desktop effects might interfere [15:19] yea i have compiz enabled maybe thats why [15:19] I found those desktop effects rather fun in the beginning and now I just turn them off [15:19] ok. its fully upgraded now. Think i'll restart and see if things work [15:20] brb, *fingers crossed* === jorge_ is now known as Hendrix [15:20] i find them fun & they increase my productivity a bit === Hendrix is now known as Hendrix_^ [15:20] :) === Hendrix_^ is now known as Hendrix_guitar [15:21] Buenas [15:22] hi there, I have a bug but I'm not sure if it's kubuntu or kde related. in #kde someone said it works for him: when I attach an external screen to my netbook and it's hooked up to the powerplug, how can I make that the screen of the external monitor doesn't go black when I close the lid? Here are my powersaving settings: http://www.sjau.ch/kdepower1.png and http://www.sjau.ch/kdepower2.png === apt-get is now known as darthanubis [15:32] i'm back so it worked mostly. windows borders are still broken with most themes. i have to use ugly one just to get borders back [15:33] well, you might want to try the experimental ppa then === dendrobates is now known as dendro-afk === dendro-afk is now known as dendrobates === darthanubis is now known as apt-get === apt-get is now known as darthanubis === darthanubis is now known as apt-get === darkv is now known as Mufasa [16:08] Hi i am driving windows programs with wine but my problem is that the small text is going very hard to read, please help === dendrobates is now known as dendro-afk [16:12] Rasmus: try using the program "winecfg" to change the dpi of your fonts [16:13] tuks_:where to get [16:14] it's automatically installed with wine [16:14] just enter it on the command line or via alt+f2 [16:15] ok im trying [16:15] and what to do in here?? [16:15] tuks_:Where should i fix it in here [16:16] in the graphics tab there is "screen resolution". try that [16:19] tuku_: how high should it be?? [16:20] tuku_:?? [16:20] Rasmus: I don't quite know, just try what suits you best. [16:20] i did it higher but it didnt give any effect :( === apt-get is now known as darthanubis [16:21] tuks_:i am trying to play "cave story" and the snmall text didnt be any better [16:24] hola [16:25] hi juan [16:25] !en | juan___ [16:25] juan___: The #ubuntu, #kubuntu and #xubuntu channels are English only. For a complete list of channels in other languages, please visit http://help.ubuntu.com/community/InternetRelayChat [16:25] !es | juan___ [16:25] juan___: En la mayoría de canales Ubuntu se comunica en inglés. Para ayuda en Español, por favor entre en los canales #ubuntu-es o #kubuntu-es. [16:26] Sorry [16:26] Hello [16:26] hi [16:26] Can you tell me were is the spanish channel? [16:26] Rasmus: I just found on google that there is a native linux version of cave story. That might look better. http://community.livejournal.com/doukutsu/101690.html [16:26] --> Para ayuda en Español, por favor entre en los canales #ubuntu-es o #kubuntu-es. [16:26] no problem. I am reading where is [16:26] For some reason, my bottom panels keep freezing. It is now stuck on 2:36pm, and it is 11:26am. Any ideas? [16:28] Sorry again, but... How can I go to #kubuntu.es? I am a new user. [16:28] type: /join #kubuntu-es [16:28] Thanks Hyper_ch [16:28] juan___: te nada [16:29] hyper_ch: "de nada" [16:29] :) [16:29] The spanish channel is empty. Is this normal? [16:30] juan___: there are many people in there [16:30] I guess you typed it wrongly [16:30] Maybe [16:31] yes... I put . not - [16:31] Thanks again === darthanubis is now known as apt-get [16:31] :) === feld2 is now known as Feldegast [16:46] I think I figured out why my plasma-desktop keeps freezing, when I did "killall plasma && plasma-desktop" in konsole, it said it couldn't find some of my recent documents or something. Any ideas? [16:49] hello for some reason i cant play runescape hd: if i click play in hd it does nothing, it stays in standard, can someone help me pls? [16:49] LuisJa: I think I have the same problem with an intel gma965, actually, I think it brought my whole computer down, I forgot [16:52] is there a fix avihayb? [16:52] before kubuntu 9.04 i could play in hd [16:52] after the actu... [16:52] don't know, I've oly tryed to run the game because someone (I think you) said that he can't run it at all === dendrobates is now known as dendro-afk [16:59] hi there, I have a bug but I'm not sure if it's kubuntu or kde related. in #kde someone said it works for him: when I attach an external screen to my netbook and it's hooked up to the powerplug, how can I make that the screen of the external monitor doesn't go black when I close the lid? Here are my powersaving settings: http://www.sjau.ch/kdepower1.png and http://www.sjau.ch/kdepower2.png === dendro-afk is now known as dendrobates [17:06] I've got a weird problem here. I tried to add an OpenTTD icon to one of my panels (actually two, to confirm the problem) and it's gone wrong. There's a space where two icons should be, but they're totally blank and I can't click on them. I can move them if I unlock widgets, but it seems KDE doesn't quite see them as 'real' icons, so right clicking on them is as if I right-clicked on the bare panel. So how I do remove them? [17:08] Rhapsody: You could try dragging them onto the desktop [17:08] Hmm, now Plasma crashed. [17:09] Oh, and ir put them back on the panel when it restarted. [17:09] OK, if I do it one-by-one, it doesn't crash. [17:09] I was able to delete them too, they were visible on the desktop. [17:10] Readding it to the panel works too. I first added them under KDE 4.2.2, maybe the backported KDE 4.2.4 helped here. === john is now known as Guest60156 === dendrobates is now known as dendro-afk === darthanubis is now known as apt-get === apt-get is now known as darthanubis [18:07] hay kann mir vill jemand sagen wie ich icq hir bei kubuntu installiere === Guest60156 is now known as brain187 === Fire-shot-x is now known as Frans|AFK [18:09] huhu [18:09] ?? [18:37] Anyone having Firefox sound issues on jaunty? [18:37] * avihayb raises his hand [18:38] @avihayb you know how to fix it? [18:38] I wish. my problem that after about 3 hours of sound, it's starts to skip like crazy [18:39] so I restrict using sound with firefox to a minimum [18:40] I dont have sound in konquerer either though >.> any web browser really, and i checked the PCM volume, and its all the way up, last night it worked after updates, but then when i rebooted it didnt again [18:41] and it works with other applications? [18:41] yeah, I always have amarok running. and the sound works fine. [18:42] you are using pulse audio or alsa? [18:43] not sure how to check, But i used alsamixer in the terminal, and it showed my sound levels so I think its alsa [18:43] you can look it up in the preferences [18:43] and multimedia [18:44] yes [18:44] okay theres 3 there; HDA Intel (alc883 analog); HDA Intel (alc883 digital) and PulseAudio [18:45] pulse audio can discriminate between applications [18:45] is the top one the analog? [18:45] Yeah [18:46] press the test button [18:46] -weird music plays as if he logged in- [18:46] sry can you repeat your problem please? I guess you don't have sound with other applications than amarok? [18:47] Im running kopete and theres sounds there that plays, its only internet apps that cause the problem (of no sound) [18:47] so, it seems like you don't get sound only from a web browser. might be the flash plugin [18:48] yes i guess that, too do you use firefox? [18:48] maybe you should install the firefox flash plugin [18:48] well i've tried reinstalling it, didnt work. (last night after the updates it started to work) and neither konquerer Or Firefox works. [18:48] after i rebooted it it stopped again. [18:51] eh, that was poorly explained. Last Night after updates, The sound worked until a reboot, then which a message said it was Falling Back to a different driver. Neither konq. or firefox's sound works, and i've tried reinstalling firefox. [18:51] maybe changing between the free-opensource and nonfree-closedsource versions? [18:52] of the flash plugin [18:52] I got the plugin from adobe.com so im not sure how to distict between them. (afk-2mins) [18:55] the adobe one is the non-free [18:55] it works well for me [18:56] hmm, im going to try 'sudo apt-get flashplugin-nonfree-pulse' [18:56] came back -No installation canidate- ._. [18:57] !info flashplugin-nonfree-extrasound [18:57] flashplugin-nonfree-extrasound (source: flashplugin-nonfree-extrasound): Adobe Flash Player platform support library for Esound and OSS. In component multiverse, is optional. Version 0.0.svn2431-3 (jaunty), package size 7 kB, installed size 64 kB (Only available for i386) [18:58] @avi "event not found" [18:58] what? [18:59] i typed !info flashplugin-nonfree-extrasound and it said !info: event not found [18:59] oh, the !info is a message that the irc bot ubottu reads [19:00] look: === darthanubis is now known as apt-get [19:00] !info flashplugin-nonfree-extrasound | srh156 [19:00] srh156: flashplugin-nonfree-extrasound (source: flashplugin-nonfree-extrasound): Adobe Flash Player platform support library for Esound and OSS. In component multiverse, is optional. Version 0.0.svn2431-3 (jaunty), package size 7 kB, installed size 64 kB (Only available for i386) [19:02] Oh. i see [19:03] so it seems its not for kubuntu? just esbound and oss? [19:05] Perhaps the install from adobe errored? any commands to take it out? [19:05] or just from software add/remove [19:06] I suggest you use a package manager to completely remove the flash plugin, then instal it again [19:07] i use apt-get, do you know the command to remove, cause I had installed from the mozilla auto installer. [19:08] remove the flashplugin, not rm xD [19:09] apt-get remove === root is now known as Guest27408 [19:09] I didnt initilally install from a package manager though [19:10] hola alguien que quiera hablr conmigo [19:10] !es | Guest27408 [19:10] Guest27408: En la mayoría de canales Ubuntu se comunica en inglés. Para ayuda en Español, por favor entre en los canales #ubuntu-es o #kubuntu-es. === harjot_ is now known as harjot [19:11] srh156: it doesn't matter, they all use apt under the hood [19:11] hola [19:11] okay [19:12] quien eres mujer o hombre [19:12] En la mayoría de canales Ubuntu se comunica en inglés. Para ayuda en Español, por favor entre en los canales #ubuntu-es o #kubuntu-es. === john is now known as Guest47825 [19:13] Guest27408: hola ?está problemas con kubuntu? [19:19] installed the .deb from adobe, used the package manager to install, didnt seem to work. === dendro-afk is now known as dendrobates [19:49] hello for some reason i cant play runescape hd: if i click play in hd it does nothing, it stays in standard, can someone help me pls? === kb is now known as Guest14466 === karaba is now known as karaba_ === karaba_ is now known as karaba [19:59] Hello i must copy a protect cd what program i can use? === schreibers is now known as _Basti_ [20:04] avihayb, The sound now works on firefox after a reboot, Thanks a bunch ^-^ [20:05] srh156: good to hear. pun not intended... === dendrobates is now known as dendro-afk === Byron_ is now known as Byron [20:08] Where can I get help with a MySQL query? In short, I'm trying to get unique results where I'm getting a duplicate. === |Draglor| is now known as Draglor === kb is now known as Guest34257 === oem is now known as xanndy === ubuntu_ is now known as Adapter [20:56] So, anyone care to tell me why scaling_max_freq=800000, despite cpuinfo_max_freq=2501000? === root is now known as Guest46197 [21:41] hi. someone can help me to configure bluetooth? [21:45] i'm trying to connect my cellphone, but i can't get kbluetooth4 to work [21:46] it doesn't detect it [21:47] #bookz [21:47] i think there is a problem with bluetoothd, but really don't know, i'm novie at this [21:49] Hi all, having problems with video on kplayer, smplayer, and dragon player. they play a movie but screen is clear or transparent. sound works. mplayer, vlc and elisa work fine. [21:51] l [21:52] <[em]matrix> why doesn't the wireless network connect app for the alpha 6 kubuntu autodetect the encryption type. I mean, what if i don't know the specific type, wpa-personal, wpa-blah blah, wpa-etc, i mean, it is like a guessing game and it will only work if i set the right one. [21:57] hi guys, i bought a new sony laptop, installed kubuntu karmic, and skype on it. mic doesn't work on skype. I turned on all the mixer options. can anyone help? [21:58] lika: is audio available? [21:59] yes [21:59] only builtin microphone doesn't work [22:00] if I use external microphone it works [22:01] lika: are you sure its a prob only with kubuntu? have u tried other OS if u have a dual boot? [22:01] kalp, it works on vista [22:11] привет всем [22:13] lika: sorry cant help === jamie is now known as Guest1154 === Guest1154 is now known as _OopsyBear [22:25] <_OopsyBear> Hi [22:26] <_OopsyBear> My laptop won't accept my root password, I set it in the install but it won't work [22:26] <_OopsyBear> Is there anything I can do ? [22:28] _OopsyBear, are you using sudo su? [22:29] <_OopsyBear> Well, I've tried in terminal writing sudo -l and typing the password [22:29] <_OopsyBear> And when programs like package manager want my password [22:29] <_OopsyBear> It doesn't work [22:31] _OopsyBear, try sudo su [22:32] su will never work without sudo [22:33] ciaoo.... === harjot_ is now known as harjot === gyz is now known as ct- === root is now known as Guest79063 [22:58] hello for some reason i cant play runescape hd: if i click play in hd it does nothing, it stays in standard, can someone help me pls? [23:43] Good evening gentleman. Some aplication is running ( probably something "wine" ) related however i can't veryfi what is it - therefore i don't knew what to kill. P.S. This aplication is emmiting sound throu speakers which is fucking anoying. Help. P.P.S. I did not figured out how to set spell check is "quassel" so sorry for spelling. [23:47] hello