[00:00] !away > mau_restor [00:00] mau_restor, please see my private message [00:00] winterswift: The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct. [00:00] NO CLICK -> nothing [00:00] Rumo: sudo grep -i tty /var/log/messages [00:00] how do i do? can i just upgrade ubuntu? or do i have to reinstall every 6 months? [00:01] reuben: do other networking functions work? [00:01] well im on here [00:01] pidgin works [00:01] Hello, I'm using 9.10 on a T60, neither the mouse pointer (on the keyboard) nor the touchpad work [00:01] WanHouse: there are 8 lines... [00:01] nicklas_: if you are talking about upgrading to Karmic ... Please wait 2 more weeks before upgrading ... Karmic will be released on 10/29/09 -- FANFARE ... you can upgrade every 6 months, if you want, or you can wait (like I do) for Long Term Support version (IMHO they seem to work better) [00:01] WanHouse: should i post? [00:01] Pretty sure they stopped working after going to 9.04 [00:01] Rumo: Priv me... hold on [00:02] winterhourse: i use proxy server to connect at college, but its switched to directly connected whilst im at home, where i am now [00:03] nicklas upgrading can be hazardous to your system. Make sure you backup your data first. [00:03] nicklas_: just joined, what is your problem? [00:03] Any apps other than Viking to access Navman gps data [00:04] winterhouse: any suggestions? [00:05] when I load fluxbox through gdm, it does not load my Xdefaults file [00:05] nowimproved: so load it [00:05] reuben: talking to me i assume? [00:05] how? [00:05] nowimproved: use xrdb [00:05] Does anyone already upgraded to Karmic [00:05] yes lol [00:06] !karmic | joseantoniordlmc [00:06] joseantoniordlmc: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 === Rabbitbu1ny is now known as Rabbitbunny [00:06] does anyone knows how to use desktop effects in karmic [00:06] !karmic | joseantoniordlmc [00:06] joseantoniordlmc: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [00:06] joseantoniordlmc, i upgraded and it bricked my computer [00:06] joseantoniordlmc: ask your question in #ubuntu+1 please [00:07] so I had to downgrade to 8.0.4 and now I am finally back to 9.4 [00:07] fccf ok but nobody answer [00:07] winterswift: i use proxy server to connect at college, but its switched to directly connected whilst im at home, where i am now. and i cant update saying failing to connect, but im allowed on pidgin,mozilla and irc [00:07] hi all i was wondering what your thoughts where in torrent downloading vrs mirror vrs direct. [00:08] reuben: can you restart your internet connection? [00:08] joseantoniordlmc: probably because they are laughing at you... Karmic is still in beta and is not currently supported in this channel ... no help here === new-user is now known as not-so-new-user [00:08] Any known apps for using Navman gps with Jaunty, Viking doesn't work [00:08] reuben: use the modem/router if you can, otherwise just restart your card [00:08] iv rebooted doesnt help [00:08] winterswift: W: Failed to fetch http://gb.archive.ubuntu.com/ubuntu/pool/main/g/gftp/gftp-common_2.0.18-17ubuntu1_i386.deb [00:08] Connection failed [00:09] thats on package manager, seems to do the same on updates also [00:09] huh, ive had that problem, but i cant remember how i fixed it last time [00:09] any iseas please [00:09] new-user you will get much faster downloads through using torrent especially when it is first released. [00:09] fccf very gentle of your part [00:10] The_Doctor, torrents can be slower.. but you can pause/stop/resume them.. handy for large d/ls [00:10] reuben: have you tried using the terminal to update? [00:10] is that also true [00:10] talking about karmic, when it will be lauched how i will be able to upgrade from intrepid? i had to first update to jaunty or i can/must do the jump? [00:10] you can also pause/stop/resume regular downloads :) [00:10] !karmic | Notch-1 [00:10] Notch-1: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [00:10] jamiewan: gpsman will work with any gps reciever that uses NMEA 0183 syntax (which should be any gps reciever) [00:11] fccf: thanx where can i find that tho, repos? [00:11] joapinto: :D it's a general question :D === not-so-new-user is now known as new-user === new-user is now known as not-so-new-user [00:12] jamiewan: it is in the repos [00:12] joapinto: from hardy to jaunty, direct update or first intrepid? [00:12] fccf: cheers ill take alook [00:12] Notch-1: first intrepid === not-so-new-user is now known as new-user [00:12] hi did any of you had this error in the past? Can't create PID file /var/run/dhcpd.pid: Permission denied. i try to configure dhcp for one of my interfaces... i have no access to www at the moment so i cant use google :/ [00:12] fccf: this is the general rule? been like this in the past and so in the future? [00:13] linux is awesome. [00:13] If anyone cares, this is a cool thing I just saw I know this isn't tech support but.... http://www.nixtutor.com/ubuntu/20-ubuntu-derivatives-you-should-know-about/ === franck_ is now known as franck [00:13] nerdy_kid: :D [00:13] so torrent downloads are beter are they [00:14] Notch-1: you can only upgrade 1 release at a time ... unless LTS .. then LTS can upgrade to the next LTS ... i.e. dapper > hardy > Lucid Lynx [00:14] Notch-1 ;D this is an EX-vista user here haha [00:14] fccf: thanks [00:15] nerdy_kid: prepare yourself for unexpected throubles :D (ex xp user :P) [00:15] How can I see what program is accessing what ip on the internet? [00:16] Notch-1 haha === evad is now known as Guest35713 [00:16] nerdy_kid: nothing computer related is "for human beings" it's a sad truth... [00:16] about torrents [00:17] Notch-1 yeah true, but at least linux is fun to fix (and fixable) so much more freedom then sluggish windows... [00:17] hi did anyone had this error? Can't create PID file /var/run/dhcpd.pid: Permission denied. [00:17] ok you dont seem yto know about torrents [00:18] new-user: this channel is for ubuntu support. Do you need help downloading torrents in ubuntu? [00:18] one no, but that sounds like the program is already running [00:18] FluxD: netstat -ntap [00:18] i know how to was wondering if its better for slower connections [00:19] new-user: better in what sense? [00:19] i used ps -A to find it, i found all processes and killed them (thank you for answer [00:19] nerdy_kid: oh you know how to fix, this not apllies to you :D you 'll really enjoy that than [00:19] i don't have any other access to web except irc [00:19] it takes me 3 hours to download mirror .iso immages now never used to [00:19] one not firefox [00:20] my service provider blocked my http and https [00:20] jnb what say you [00:20] !enter | new-user [00:20] new-user: Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation! [00:20] ok point [00:20] new-user: you didn't answer my question [00:20] it takes me 3 hours to download mirror .iso immages now never used to [00:20] Notch-1 one oh yeah...been enjoying it for a year :D [00:21] new-user: yeah, I read that. [00:21] anyone use adobe air at all? [00:21] !ot | fabiotheg8 [00:21] does anyone know why openal (and possibly pulseaudio) would make really crackly sounds? it seems load dependant and sometimes cuts out until i restart [00:21] fabiotheg8: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics. Thanks! [00:21] does anyone use adobe air on ubuntu? [00:21] jnb when downloading mirror .iso as takes so long i get bad checksum [00:22] will torrents help me [00:22] new-user: yes [00:22] there is that better? [00:22] !anyone | fabiotheg8 [00:22] fabiotheg8: A large amount of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? [00:22] nope [00:22] fabiotheg8: just ask your actual question [00:22] winterswift: tried terminal update doing same thing [00:23] fine, i installed adobe air on UBUNTU, and the worked great and a few apps, but now what??? [00:23] reuben: thought it would [00:23] lol [00:23] now what with what ? [00:24] fabiotheg8: wait till it becomes bloated like adobe reader??? [00:24] how do I run that apps? [00:24] what to do next with ubuntu ? [00:24] fabiotheg8 I cannot find it in crossover office Pro. [00:24] fabiotheg8 I don't think it will install. [00:25] Skype suddenly locks up on me all the time, programme freezes . . . can anyone help me? [00:25] http://www.youtube.com/watch?v=pTRsLW0eet0 [00:25] reuben: sorry, i forgot, this is karmic right? [00:25] The_Doctor, what> [00:25] ? [00:25] karmic??? [00:25] this is sick!! :D [00:25] fabiotheg8: you are talking about an un-supported application, and you really should be reading the Adobe Air Developers guide, not asking offtopic questions in #ubuntu, as #ubuntu is for Ubuntu Related support and NOT ADOBE PRODUCTS [00:25] reuben: 9.10 or 9.04? [00:27] if i put adobe on ubuntu is that not ubuntu releated? [00:27] fabiotheg8: maybe try ##air [00:27] fabiotheg8 you cannot put it in Ubuntu. It will not install. [00:28] can i run a font made for Microsoft visual studio on ubuntu? [00:28] The_Doctor, yes it will, and i have it installed [00:28] fabiotheg8 does it run? [00:28] fabiotheg8: #air would be alot better place to ask questions... remember Air is a web-development framework, you technically don't run the apps, they get "pushed" to you from a server [00:29] infidel2s: try to install virtualbox or vmware and install windows on it then install microsoft visual studio [00:29] I don't know i can't figure out how to run that apps [00:29] one i'm using ubuntu as a virtualbox guest os [00:29] someone had air working in the other linux channel i frequent so I know it can run on linux [00:29] one i'm not trying to use visual studio. i just want the font [00:29] ok im sorry [00:29] fabiotheg8 then it probably is not installed. You could type the name in a terminal or search your software but probably neither will work. [00:30] how do i shut the avahi daemon? [00:30] and stop it from loading on startup? [00:30] i installed the compact wireless and now my wifi doesnt show up i was previusly using linux-backports-modules-jaunty how can i go back to madwifi? im on ubuntu 9.04 [00:30] anyone here use xchat [00:30] new-user me [00:30] from around 30 minutes [00:30] it is installed, i have the application installer, and uninstaller in the applications menu [00:30] 9.04 [00:31] winterswift: ^ [00:31] fabiotheg8 if it won't start it probably is not really installed. [00:31] one i am trying to configure my url handler settings atm its using opera i would like to use firefox. i need to know the url command for firefox 3.5 thanks [00:31] sfa: google it, i accidentally found many tutorial for doing this, some day ago... [00:32] ^ anyone else know [00:32] The_Doctor, it does install [00:32] reuben: is your problem similar to this? http://ubuntuforums.org/showthread.php?t=1186289 [00:32] new-user im sorry i dont have a clue [00:33] fabiotheg8 then click on the icon and run it. You probably don't have an icon so it is not "really" installed. Type the name in the terminal -- that should make it start -- I'll bet that it doesn't. [00:33] one can you go to settings > advanced > url handlers [00:34] www.google.com [00:34] hi [00:34] anyone here? [00:35] 1381 ones [00:36] hi im having some trouble im trying to install a counterstrike source server on intrepid but i need to do it all through console someone mind helping me [00:38] Which tool should I use to clone one hard drive (60gb) to a target drive (500gb). I have a raid 0 and I need to change out the drives and not lose anything. [00:38] hey all [00:38] Deaglebear: 8.10 is a nice release, but as far as I know it's not going to be supported on the desktop anymore in April [00:38] well thats fine its ona server [00:38] winterswift: yes [00:38] HELP ME to WIN iPod!! Please register http://vk.com/reg6453465 Thnx [00:38] fabiotheg8 I just did a Google search and yes you can install Adobe air in Linux. I also did another search on how to use it and found many sites. [00:39] Firestalk: trolling? === default is now known as acad [00:39] No [00:39] Has encrypted root installation been moved to the regular install CD for Karmic? [00:39] There is no trolling from iPod-less man [00:40] !ot > Firestalk [00:40] Firestalk, please see my private message [00:40] sebsebseb: i need to get this to work for a match i have tonight i have instructions on how to do it normally but its when i try to do it all through console i get hung up === Pupuser402-2 is now known as Guest11730 [00:40] reuben: too bad nobody posted the fix there :/ [00:41] i am trying to configure my url handler settings in xchat its using opera i would like to use firefox. i need to know the url command for firefox 3.5 thanks [00:42] hi anybody got a macbook or broadcom nic? [00:42] new-user waht version does 'firefox' ?? [00:42] Deaglebear: I have no idea, maybe they know in #ubuntu-server or maybe even ##linux [00:43] im using mac [00:43] angelus, what version of firefox. i have 3.5 atm [00:43] which mac? does it have broadcom nic Arezura ? [00:43] winterswift: tis well annoying, and ent formatting for tht lil reason [00:43] hi, i am trying to follow this page: http://www.debianadmin.com/install-microsoft-corewindows-truetypeubuntu-titlemacintosh-fonts-in-ubuntu.html but when i type fonts:/// into nautilus it tells me nautilus cannot handle fonts locations [00:43] but cnt install jack shit [00:43] yes, its the new unibody c2d 13" [00:43] new-user open a terminal and hit 'firefox' ... and check the version from there ... that SHOULD be firefox 3.5 .... but just double check anyway ... [00:44] i'm having problems with b43 module for the broadcom wifi nic, the new module wl won't go in monitor mode so i need the old b43 one [00:44] yeah, it doesnt [00:44] done it is [00:44] try a hawking [00:44] that's better than mine, lucky you hehe [00:44] ok then 'firefox' is probably the command you are looking for new-user [00:45] but with the old b43 one i read it works [00:45] * mau_restor is away: ... [00:45] www.google.com [00:45] have you ever tried b43-fwcutter and that things Arezura ? [00:46] are there any software for note taking on linux with a tablet pen? (like the wacom tablet of the genius pen tablet) ? [00:46] yeah, they must have changed something, it seems like the old ones always work later. === idleone_ is now known as IdleOne [00:47] angelus, this is the degault one Open Link in Opera: !opera -remote 'openURL(%s)' [00:47] . [00:47] putting just firefox does not work. [00:47] i got a Hawking wfif card that i can use for monitoring, etc.. its usb and has an antenna [00:47] new-user you want to try 'firefox %s' [00:47] optimizer: you mean softwares or drivers ? i know cellwriter... [00:47] s/wfif/wifi [00:48] what you mean Arezura ? [00:48] ahh sry sry [00:48] i didn't read last one [00:48] www.google.com [00:49] whats the command line to uninstall shiretoko [00:49] angelus, nothing now when i click on the open in webbrowser i get geany opening up [00:49] U-b-u-n-t-u: sudo apt-get remove firefox-3.5 [00:49] U-b-u-n-t-u: sudo apt-get remove firefox-3.5 [00:49] thanks [00:49] U-b-u-n-t-u, sudo apt-get install [00:49] i havent tried fbcutter [00:49] oops [00:50] that's great, i'm thinking of buying one cause i've had quite enough these days trying to make the macbook's card work [00:50] HWUG1 Wireless-G USB [00:50] or HWUG1A works too [00:50] hello everyone, I have a shell-script problem : http://pastebin.com/m2100c736 On the highlighted line, it tells me the if condition isn't right.... [00:50] ok anyone know of a new lightweight browser [00:50] hey [00:50] I hate opera and firefox 3.5 [00:51] running 9.10 beta [00:51] i heard that card works great [00:51] on an intel 945g chipset [00:51] yes [00:51] Chromium is comming along nice U-b-u-n-t-u [00:51] U-b-u-n-t-u: Why? :\ [00:51] whenever I enable compiz it crashes after 5 seconds [00:51] Is there a command to change my screen resolution? [00:51] how much is it? [00:51] leaf-sheep, running up my ram cache [00:51] love the aentta options [00:51] new-user http://xchat.org/faq/#q221 <<< does this help ??? [00:51] antenna* [00:51] U-b-u-n-t-u: How much ram do you hasve? [00:51] U-b-u-n-t-u: lynx === foofish_ is now known as foofish [00:52] its around $30 at frys [00:52] leaf-sheep, 2 gigs ddr2 pc4200 [00:52] thanks IdleOne and foofish [00:52] angelus, no been there [00:52] @toxic : that line should be if [ $ACTUAL_STATUS = "locked" ] [00:52] connect de.arcnet.coders.com [00:52] could not find anything [00:52] plug it in and it works [00:52] subone: System -> Preferences -> Display [00:52] well, i can afford $30 hehe [00:52] how do i get a font from ubuntu? specifically the on the terminal uses? [00:53] U-b-u-n-t-u: That should be enough for everyday usage. Also, check out midori :) [00:53] and '!firefox -a firefox -remote 'openURL(%s,new-tab)' didnt work ??? [00:53] i only have 1gb firefox works ok [00:53] Yossi: what do you mean? [00:54] leaf-sheep, well for whatever reason my ram cache goes to 90%+ when I start firefox or opera........ and I was using the same system with windows and I didnt get that...... so I assume I need a lighter weight browser [00:54] i want to use the font from the terminal in visual studio [00:54] I'm using 730_MB out of 3_GB. That's more than enough. :( [00:54] well, t2l for me, see you tomorrow, many chanks Arezura ! have a good day/night whatever ehhe [00:54] Yossi: right-click the terminal, edit profile, click around and you'll find the font [00:54] U-b-u-n-t-u: it's nothing to do with the browser [00:54] its called Monospace [00:54] hey what's a good filesharing thing that would work like limewire bu for ubuntu? [00:54] U-b-u-n-t-u: linux uses ram in a different way to windows [00:54] Yossi: good stuff [00:54] actually on my MBP c2d the first c2d the wifi would drop ever 10 to 1 sec with the restriceted driver. [00:55] but i dunno how to get a font file from a name [00:55] s/1/15/ [00:55] Is there any firewall that works like this ? http://i.iimmgg.com/images/gr/d1f60ec747acbbdcdeb771cb5701f7b0.jpg [00:55] !limewire | wickedJoe [00:55] wickedJoe: limewire is a popular P2P client running on the Gnutella network. To get it running, install !Java first, then download Limewire from http://www.limewire.com/LimeWireSoftOther and finally run runLime.sh. Consider !FrostWire as an alternative. [00:55] Yossi: hm, neither do i [00:55] Yossi: it [00:55] wickedJoe: you could try giftd [00:55] !frostwire | wickedJoe [00:55] wickedJoe: frostwire is a totally open source version of Limewire. For installation help, please see https://help.ubuntu.com/community/FrostWire [00:55] thanks! I'll check it out === jay is now known as Guest32943 [00:56] wickedJoe: i wouldn't trust limewire. the windows installers my friends always use to get limewire always contain malware. === fluid_ is now known as fluid [00:56] Wait is frostwire in a repository? [00:56] wickedJoe: but at the same time, it's hard to imagine malware getting into an ubuntu app [00:56] FluxD: Firestarter came to my mind -- but yeah, you don't need it in first place. [00:56] U-b-u-n-t-u: if you run 'top' from a shell while you have opera/firefox open, you'll see that the majority of your ram is being used as 'cache' [00:56] foofish, it seems that older versions let you go to fonts:/// in nautilus and get the fonts, but now that wont work [00:56] !firewall | FluxD [00:56] FluxD: Ubuntu, like any other linux distribution, has firewall capabilities built-in. The firewall is managed using the 'ufw' command (see https://help.ubuntu.com/community/Uncomplicated_Firewall_ufw), or 'iptables' (https://help.ubuntu.com/community/IptablesHowTo). GUI applications such as Firestarter/Gufw (Gnome) or Guarddog (KDE) also exist [00:56] vox oh? [00:56] vox I didnt know that [00:56] vox so its normal? [00:56] wickedJoe: seems there's no package named frostwire in jaunty [00:57] leaf-sheep, I am trying to stop the connection before it connects [00:57] U-b-u-n-t-u: completely [00:57] wickedJoe: you could also try gtk-gnutella, however [00:57] Yossi: it may be DejaVu Sans Mono [00:57] Yossi: but that is a guess. [00:57] ok I'll try the gnutella first [00:57] FluxD: Firestarter is a very good firewall. [00:58] ok vox so high levels of cache are normal and I shouldnt be concerned its not a hardware issue or software just the way ubuntu uses cache [00:58] U-b-u-n-t-u: Right. [00:58] aha! [00:58] U-b-u-n-t-u: exactly. it's not just ubuntu, it's the way every form of linux works [00:58] reinstalling firefox =_= [00:58] you might be right [00:59] U-b-u-n-t-u: think of it as "well, nothing else needs it right now, so i'm going to use it to make everything faster" [00:59] U-b-u-n-t-u: "Free" + "Cache" is your total free. [01:00] U-b-u-n-t-u: Its a Release-On-Request Cache [01:00] ? [01:00] right now with xchat and pidgin ram is at 23% and cache 13% but if I open firefox and surf the ram shoots up to like 50%-70% cache like 98% [01:00] I should mention I am using 64 bit [01:01] U-b-u-n-t-u: thats normal. pidgin and x-chat aren't programs that require "room to move" so to speak [01:01] vox ok [01:01] well thats good news then! [01:01] thought I had bigger issues [01:01] Is there a command line app to connect to a KVM virtual machine? I've only found VNC clients so far. [01:02] thank vox WanHouse et al [01:02] thanks* [01:02] welcome [01:02] I've got some problem with my X. Sometimes (1 times every 2 or 3 boot), the screen freeze just when it launch gdm. I have LXDE, and an intel 845G. Can someone help me ? [01:02] hi [01:02] hello! my laptop is no longer suspending or hibernating after a unclean shutdown where I had to do a manual fsck. how can I get it to work again? [01:03] U-b-u-n-t-u: No problem [01:03] I am just curious how to tell what mythbuntu version I am using? [01:03] gslauen: "lsb_release -a" [01:03] nice [01:04] I know this isnt the exact place to ask for beta help, but this might not be a beta issue: My 10v has stuttering audio when running any kind of game even something as simple as MAME. [01:04] how to choose side of toolbar? [01:05] girlsname: Best to ask in Karmic channel. [01:05] !karmic | girlsname [01:05] girlsname: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [01:06] Is there a command line app to connect to KVM virtual machine consoles? [01:06] leaf-sheep did but no response thought Id post here too just in case it wasn't just a beta problem [01:07] hi [01:07] apparently, my desktop session froze, what do i do? [01:07] how to change toolbar position? [01:08] * mau_restor is away: "Fui a cenar" [01:08] hello, how do i show all " unique" users logged in? I tried "unique < `users`" and "unique < `users` | sort". Thnx in advance [01:08] Is AMD64 the version for all x64 processors? [01:09] yes [01:09] Is it possible to activate Compiz in Ubuntu Karmic (9.10) with my ATI R350 (ATI 9800XT)?? [01:09] Evet: right click it and select properties [01:09] http://cdimage.ubuntu.com/releases/9.10/beta/ <-- And this is the most recent one right now, right? [01:09] inxs: `who` shows logged in users [01:09] rashed2030: yes [01:10] inxs: Try `who | unique`, the "<" operator isn't appropriate here [01:10] Sagaci, unfortunately there is no properties [01:10] its gnome eeepc [01:11] mikegerwitz: ty ill try it out [01:11] my xwin is frozen, but i can acess a shell via remote login, how do i fix this? [01:12] anyone know? [01:12] in gdm , autologging is enable , but it doesn't autolog... What config file should i look after . /etc/gdm/gdm.conf or . /etc/gdm/gdm.conf-local [01:12] spO : i have the same problem [01:13] is it a laptop ? is it everytime or sometimes ? [01:13] what happens to ubuntu on a gamma ray burst? [01:13] Good Evening Everyone, I was wondering if someone could help me with a Pulse Audio question I had. For some reason ever since the other day I have been fighting with sound working properly on my laptop. Whenever there is sound played all I get is static. I did not install anything that or make any changes that I am aware of to cause this issue. [01:14] inxs: actually, who lists more than just a username. You can try something like `who | grep -o ^[a-z]\+` to list only the usernames..I'm not sure if there's a flag to do that for you [01:14] vince: you use realtek soundchip? [01:14] spO : to make short : the answer should be : xorg.conf. [01:15] vince offer, are you there? [01:15] Does anyone in here know of a problem/solution in regards to Mini 10v's having stuttering audio while running any sort of game? [01:15] spO, are you there ? [01:15] altergod: Not sure if I do or not [01:15] altergod its a Acer Aspire 5315 [01:15] yeah they use realcrap soundchips ac97 [01:16] altergod: Not going to argue that, but it worked fine until recently [01:16] and still works fine under Win 7 [01:17] Someone suggested I run "sudo alsa force-reload" which brings sound back for some applications for a little while [01:17] anyone in here running a thinkpad? [01:17] yeah, try that [01:17] altergod: I did and agian it makes some apps work fine for a little while before they quit agian after an hour or so [01:18] Other apps and Gnome will still play statuc [01:18] static* === Slade is now known as Guest10345 [01:18] yeah, i know, it sucks [01:19] realtek and linux is always a nightmare [01:19] i did a /etc/init.d/gdm restart , but that did not fix my frozen xwindows [01:19] hi folks, how can i utilize multiple ip's on server? so i want multiple domains on each different ips [01:19] altergod: Ok well, It worked fine for close to a year and did so straight out of the box. Any idea how I can get it back? [01:19] straightdave: ifconfig add eth0:1 yourip [01:19] when I try to access XSane I get: "Failed to open device 'epkowa:usb:004:008: Access to resource has been denied". And my scanner/printer is nor present in "/proc/bus/usb" as /004/008 the folder is empty. how can i fix this === Guest10345 is now known as Slade [01:19] or something [01:19] alteregod: where do i add taht ? [01:19] :) [01:20] multiple domains for a NIC? [01:20] no clue [01:20] alteregod: the server already hosts one domain. i got another ip, so i can put the new domain on it. [01:20] i smoke to much pot i think [01:20] hello! my laptop is no longer suspending or hibernating after a unclean shutdown where I had to do a manual fsck. how can I get it to work again? [01:20] gdm is the same as xwin session? [01:20] or gdm is what controls the xwin session? [01:21] ah, you can edit the hosts [01:21] !hosts [01:21] Sorry, I don't know anything about hosts [01:21] spO : i don't know. Do you reach X ? or you stay in console [01:21] !/etc/hosts [01:21] Sorry, I don't know anything about etc/hosts [01:21] Was worth a shot [01:21] StraightDave, all you need are ip aliases, provided that the NIC is plugged in to something that will route the traffic for all the IP's to it === zhaozhou_ is now known as zhaozhou === beilabs__ is now known as beilabs [01:22] fact, i am in a remote shell , my xwin that starts up usually, froze while i was playing a movie with mplayer [01:22] thedude42: well I have already pointed the domain to the new ip. [01:22] how do i restart this xwin? [01:22] ctrl alt backspace [01:22] or "killall -9 xwin" [01:22] tripps when you reboot it checks to see if it needs fsck 'ng anyways [01:22] guys how do I create a new user with home dir /var/www? I get an error about the dir beeing assigned to another user or something.. I have installed proftpd and I want to make a user to connect to the ftp with /var/www as the ftpdir.. [01:22] StraightDave, right, I assumed that, but you were just needing to know how to configure your multiple IP's on the one interface, correct? [01:22] Take0n-> wrong perms [01:23] you need to add ip aliases [01:23] thedude42: yes. so put the new site on the new ip [01:23] alteregod: how to add ip aliases ? [01:23] what is the name of xwin i,t is not xwin [01:23] n8tuser, no I mean the system died with dead battery, then upon next startup prompted a needed manual fsck (where it goes to maintenance command shell). after endless inodes were cleared, etc., the system now no longer suspends or hibernates at all [01:23] with ifconfig afaik, so you can point various ips to a single NIC [01:23] n8tuser, I am using the gui to create new user. There is the root and there is me (Antonis) there are no more users.. would it be easier to use a command? I tried with a command but got the same error [01:24] ifconfig ? [01:24] http://www.faqs.org/docs/Linux-mini/IP-Alias.html [01:24] anyone familiar with setting up lirc creating ledxmit? [01:24] thanks alteregod [01:24] StraightDave, you may prefer to simply configure your /etcnetwork/interfaces file [01:24] n8tuser, also fscking wiped out shell history, firefox cache, cookies, etc. I don't know how a journaled filesystem could have had that much damage to it [01:24] sup peeps, got a stupid question - would like to up to firefox 3.5 ... somehow while trying ended up with some shiretoko 3.5 version ??? [01:24] thedude42: how can i do that? edit teh /et/cnetwork/interfaces file ? [01:24] tripps i dont know where the configs for hibernation are [01:24] spO : google : the name of your graphic card (you 've got it via lspci | grep VGA ), and the word "xorg.conf" good luck, i'm going to bed [01:24] Tech-Mike: That's firefox 3.5 === osiris_paradisih is now known as osiris [01:25] Flannel: ok so its named shiretoko ? [01:25] no one is usin a thinkpad? [01:25] Tech-Mike: That's the codename for Firefox 3.5, yeah. There are trademark issues and other complications regarding the naming, but it's functionally equivalent. [01:25] yeah its called shiretoko, a succesful movie from akira kurosawa [01:25] hsarci-> im at the moment is on T42 [01:26] Flannel: ok appreciate it [01:26] StraightDave, that file will controll the ifup/ifdown commands, as well as how your network cards are configured on boot without the need to chain together multiple commands in a shell script.... man interfaces will give you the most info but you can google for a ton of examples [01:26] !shiretoko [01:26] FF3.5 is referred to as Shiretoko on your UI, see http://is.gd/1reB3 for an explanation [01:26] maybe [01:27] thedude42: thanks [01:27] dr noonien soong made it [01:27] n8tuser ur on linux?/ [01:27] can anyone help me "reset" my laptop so it can suspend and hibernate without formatting/reinstalling please? [01:27] hsarci -> yes [01:28] how would i go about converting a 720p (mkv) to 576p (mkv) ? [01:28] n8t, you have a solution for the trackpoint sensetivity? [01:28] just put your laptop into ice [01:28] i recommend dry ice [01:28] i can change it, but when i sleep/resume it goes back to default [01:28] shiretoko migh be ff3.5 but some websites won't recognize it as ff3.5 cause of the name "shiretoko".. that could be fixed though by entering about:config and changing the name Shiretoko to Firefox.. [01:28] tripps, does this help http://manpages.ubuntu.com/manpages/karmic/man5/hibernate.conf.5.html [01:28] when I try to access XSane I get: "Failed to open device 'epkowa:usb:004:008: Access to resource has been denied". And my scanner/printer is nor present in "/proc/bus/usb" as /004/008 the folder is empty. how can i fix this [01:28] thinkpadx61: vlc could do that [01:29] hsarci nope, i just dont let it bother me, i have my thumb avoid it [01:29] I'm trying to install my wacom using the linuxwacom project guide. When running wacdump, I see my tablet buttons registering, but not my stylus. What am I doing wrong? [01:29] alt-control-backspace as well as alt-contrl-f2-f6 does not do anything [01:29] the trackpoint? [01:29] the red dot? [01:29] coz_, does that also address suspend as well? [01:29] tripps, not sure but still checking [01:29] i smoke under water [01:30] Hello, I'm not really sure where to find this information. I tried setting up my Dell Precision M4400 with Twinview for 3 monitors. (Using an advanced dual-DVI port replicator) I can only get two screens to work at once. Does the laptop support having two external screens as advertised, and my laptop LCD all at the same time? [01:30] hi, I'm having problems getting lirc working. When I start lirc (sudo lirc or sudo /etc/init.d/lirc start) i get the following error: "lircd: can't open or create /var/run/lirc/lircd.pid" "lircd: No such file or directory" Can anyone suggest what to try next? [01:30] tripps, http://manpages.ubuntu.com/manpages/hardy/man8/pm-suspend.8.html [01:31] coz_, I don't even have an /etc/hibernate directory. possibly was deleted after my fsck [01:31] tripps, hold on [01:31] hsarci -> the sware looking one [01:31] hello, bought a bluetooth mouse (logitech v470). people say it works automatically with ubuntu, but it is not connecting! [01:31] high [01:31] someone here? === chaky_ is now known as chaky [01:31] i guess i have no choice but to reboot [01:31] n8t, im not talking about the touch pad...im talking about the trackpoint [01:32] tripps, http://ubuntuforums.org/showthread.php?p=3066404 [01:32] hey does anyone know of a good kde4 theme with some nice translucent window decorations? [01:32] hsarci -> i dont use the red dot at all or hardly [01:32] n8t, i got ya....thanks anyway [01:32] yeah i like those transpirating windows [01:32] they smell like teen spirit [01:33] my guess is I have many corrupted files after the fsck. possibly there's a mode where the system can check all the system files and re-download the corrupted ones? [01:33] hsarci -> you may have to go deeper in configuring your xorg.conf file for the input device [01:33] tripps: do a dist-upgrade instead [01:33] pothead, good idea [01:34] are you using hardon? [01:34] or gootsy? [01:34] pothead: please don't [01:34] pothead, heron [01:34] anyone help with bt mouse? [01:34] n8t, yeah ive realized that...i was hopin to find an xpert on the matter [01:34] sorry im not familiar with african animals [01:34] pothead: stop now. [01:34] pothead, would I do a -f? [01:35] ok sir === matthew is now known as Guest58674 [01:35] pothead, hmmm that didn't do anything [01:36] sudo apt-get dist-upgrade or something [01:36] tripps: just do a re-install over you exisiting install and choose to preserve /home [01:36] Is there any known issues with Realtek ALC272 and 3D games causing stuttering? [01:36] *Are [01:36] hi girlsname, yeah they sucks [01:36] i would like to know how a journaling filesystem would have that much damage in the first place. I haven't had to perform a manual fsck since running slackware distros 15 years ago [01:37] maybe hw failures [01:37] bad blocks or something [01:37] girlsname: Try update and upgrade. See if you got new packages coming in. I know alsa-utils is one of them. === kim__ is now known as KimBurton [01:37] or bad ram could cause a messed up FS [01:37] hi, is S-video supported in ubuntu? [01:38] KimBurton: that depends on the hardware. I've used s-video in and out [01:38] Ahh, good call leaf-sheep. Weird it hadnt notified me of updates being available and I do have it to check daily as is default. [01:38] does ubuntu support bt mice? [01:39] mneptok: that's only if he's got /home on a separate partition [01:39] mneptok, is there a command line or process spelling that out? is another option to do a distribution upgrade? [01:39] trik: yes. i'm using one now [01:39] anything special i need to do? [01:39] mikegerwitz, i have a dell inspiron 1521 [01:39] Sagaci: not true [01:39] tripps: dist-upgrade does NOT get you the next version [01:39] Hi, i just install 9.10, everything was fine until i installed the nvidia driver, my laptop has a nvidia 8400 go. Is this a knowed issue ?? [01:39] tripps: common misconception [01:39] DMZ madness. wireless passthrough to VPN works. But wired port on same router doesn't???? [01:40] KimBurton: unfortunately, I won't be able to help with any hardware; I just know that certain harware does work. You may have to look up your hardware and see if it's supported === adante_ is now known as adante [01:40] trik: which release are you using? [01:40] imau: #ubuntu+1 for Karmic at the mometn [01:40] mneptok, i'm aware of that - I mean do an actual distro upgrade [01:40] thanks [01:40] mneptok: 9.04 mint [01:40] sebsebseb : thx [01:41] I was wondering if someone could help me with a Pulse Audio question I had. For some reason ever since the other day I have been fighting with sound working properly on my laptop. Whenever there is sound played all I get is static. I did not install anything that or make any changes [01:41] mneptok, ie use the update manager to upgrade to 9.04 [01:42] trik: this is not a Mint support channel. [01:42] tripps: gksu update-manager -c [01:42] when I run "scanimage -L" as root it finds a scanner :-) but when I run it as a user it doesn't :-( which group should I add the user too? [01:42] mneptok: its ubuntu with mint [01:43] could anybody tell me how much space ubuntu server takes up on hard drive? [01:43] mneptok, do you think that would work? [01:43] TimReichhart: that depends on what you install with it [01:43] mneptok, i.e., restore my corrupt/missing files, etc.? [01:43] just LAMP [01:44] tripps: i'd do a clean re-install from optical media [01:44] TimReichhart: i wouldnt think any more than 7-800mb [01:44] vox thanks [01:44] mneptok, well it's worth a shot, right? [01:44] join #ubuntu-server [01:44] tripps: https://wiki.ubuntu.com/komputes/HowToUbuquityPreserveHome [01:45] TimReichhart: server doesnt have any X-related packages, so it's going to be significantly less than a desktop install [01:45] how do i format a sdcard to fat32 via the terminal? [01:45] i have usb trouble... anyone able to help out? [01:45] !mintsupport > trik [01:45] trik, please see my private message [01:45] this cool set of irc/email/txt acrinums [01:45] http://www.geocities.com/CollegePark/Campus/4642/irchat.html [01:45] mneptok, problem is i'm on the road and don't have access to optical media, etc., and would like to attempt restoring my laptop to a usable state [01:45] djungelkraem: mkfs.vfat [01:46] smokers delight [01:46] biovore, ok thanks ill try that [01:46] if i mounted my home folder on a different partition then, reinstall, when i install the programs will my settings stay? [01:46] mneptok: they could not help me. do you have no ideas? [01:47] llua, yes as long as you dont format that partition [01:47] djungelkraem, lol thats so badass [01:48] biovore, theres no other terminalprogram for that? im running archlinux and that program doesnt seem to be in the repos [01:48] ehm, this is #ubuntu [01:49] the channel about Ubuntu [01:49] hey all [01:49] LjL, yes but theyre quite similar [01:49] http://stackoverflow.com/questions/612115/how-do-i-run-a-php-script-through-ssh [01:49] ... [01:49] no they arent [01:49] djungelkraem: mkfs should be in there.. its a common program program.. everyone has it.. [01:49] might need to be root [01:49] im trying to do this, but when i ran screen it wasn't registered, so i typed aptitude install screen [01:49] now i have screen running [01:50] but when i try to run php /location/to/my/php/script.php it says php is not a command [01:50] djungelkraem: please do not ask questions about Arch in #ubuntu. thanks. [01:50] though i know i have php installed, any ideas? [01:50] mneptok, ok sorry [01:50] Tehedra: eh.. i assume you have php-cli installed? [01:52] Tehedra: dpkg --get-selected | grep php [01:52] Tehedra: dpkg --get-selections | grep php [01:52] typo [01:52] "sane-find-scanner | grep 0x04b8" "found USB scanner (vendor=0x04b8, product=0x0841) at libusb:008:002" "sudo chmod 0666 /proc/bus/usb/008/002" "chmod: can not open «/proc/bus/usb/008/002»: No such file or directory" [01:52] hey guys, I'm having trouble installing Ubuntu Netbook Remix [01:52] !netbook [01:52] Sorry, I don't know anything about netbook [01:53] !unr [01:53] Ubuntu Netbook Remix is a slightly altered version of Ubuntu, optimised for small screens. For more information, please see https://wiki.ubuntu.com/UNR - support in #ubuntu [01:53] how do i get my scanner mounted in /proc/bus/usb/ [01:53] I've tried to dd the UNR image to a USB stick a bunch of times now, but I keep getting "boot error" [01:53] My firefox is ridiciously slow anyone know why [01:54] sorry one second im slow lol [01:54] too many chat windows [01:54] how do i confirm if i have php-cli installed again? [01:54] Tehedra: dpkg --get-selections | grep php-cli, or just type sudo apt-get install php-cli and it'll tell you [01:55] but I believe it's php-cgi, not cli [01:56] is it possible to change GRUB to MSDOS? [01:56] Tehedra: Ah, excuse me. It's php5-cli, or php5-cgi [01:56] awesome didn't have it installed [01:56] php5 yea i found it [01:57] LinuX2half: if you want to replace the mbr (is that what you want?), you normally need to ged a windows repair cd... [01:57] check this out http://www.geocities.com/CollegePark/Campus/4642/irchat.html [01:58] anyone here have any experience with ubuntu netbook remix? [01:59] arand: yes, but for some erratic reason I can't boot the CD.... [02:01] hey all, ive found some vague bug with karmic's pulseaudio controller... [02:01] !karmic | nerdy_kid [02:01] nerdy_kid: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [02:01] nerdy_kid: join #ubuntu+1 for karmic support [02:01] when I try to install ubuntu on my system I select "install ubuntu on my system" and then the screen starts to flash weird colors does someone have a solution for this? [02:02] vox thanks :) [02:02] hi folks, i added virtual host, and restarted apache successfully. however, typing the new domain, it takes a whiel and says connection timed out. error connecting to http server ?? [02:02] aaronslife: try the alternate cd [02:03] Hi guys, can someone explain how cand i make a dual boot from grub beacuse all i have tryed had failed [02:03] !grub |Syko666 [02:03] Syko666: GRUB is the default Ubuntu boot manager. Lost GRUB after installing Windows? See https://help.ubuntu.com/community/RestoreGrub - GRUB how-tos: https://help.ubuntu.com/community/GrubHowto [02:04] i have not lost it, i had windows first and now i'm trying to install ubunut [02:05] i installed it but my pc still loads wind [02:05] I have a serious issue here...new ubuntu user [02:05] My firefox is ridiciously slow anyone know why? It takes 5-15s to load a page, with me having a 7.8MB/s connection. My friend who has the same loaded the page in a few seconds [02:06] i installed Audacious 2.2 and now i can't uninstall it [02:07] Dayspring, have you tried sudo apt-get autoremove audacious ? [02:07] m0r0n > maybe your dns is the problem [02:08] try like 4.2.2.1 [02:08] mow: How would I fix that? [02:08] mow: What do you mean by try 4.2.2.1 [02:08] i have tried all the remove codes.....it removed audacious from an older install....still have audacious 2.2 [02:08] ooo oops [02:08] so i started it using php5 [02:08] how do i end it? lol [02:09] I have a problem when I reboot my computer with a scanner attached (via usb) the permissions are not correct for /dev/bus/usb/003/002 they are rw-rw-r-- :( what I need is rw-rw-rw- there is a rule in /etc/udev/rules.d/60_iscan.rules -- SYSFS{idVendor}=="04b8", SYSFS{idProduct}=="083f", MODE="0666" which matches my scanner! what is wrong? [02:09] Dayspring, did you compile audacious and install it? [02:09] m0r0n > add it to your /etc/resolv.conf === girlsname is now known as gn-away [02:10] mow: I'm lost, add what to that? [02:10] i downloaded the tar from their site and did the /.configure and make and sudo make install [02:10] m0r0n > sometimes dns lookup don't work right [02:10] any idea why I'd get a boot error after dding the UNR image to a usb stick? [02:11] mow: 4.2.2.1 What do I do with that number, is it a program I'm so lost. [02:11] Dayspring, you will have to remove the binary file that it installed, and if you're really into it, you could track down all the files and remove them [02:12] thats why it's reccomended to use some sort of package manager [02:12] m0r0n > it's a dns server, you need to add that to your /etc/resolv.conf file [02:12] mow: So just make a new line with those numbers? [02:12] how would i remove the binary files? [02:13] m0r0n > add the line nameserver 4.2.2.1 above the ones there [02:13] then restart the network [02:13] see if it helps [02:13] m0r0n: We want to press play on tape dont we ? :) [02:14] mow: Ok brb [02:14] if i type audacious in the terminal it opens up audacious, but i can't find it to delete it [02:14] WanHouse: What? [02:14] Axothar. [02:15] Dayspring, whereis audacious should show you where the binary executable is [02:15] do i type that it the terminal? [02:15] Dayspring, wheres the binary executanle located? [02:15] Oh, Married with Children is on!!! :) ... Always cracks me up! [02:16] WanHouse, \o/ [02:16] :) [02:16] <|m0r0n> mow: It didn't do anything === emmy is now known as emma [02:17] so i'm downloading an iso of debian 2.2, just for fun === random_ is now known as Random832 [02:17] cotigao: Greetings perhaps. [02:17] i've been debating taking one of my boxes and experimenting with debian running the hurd gnu kernel [02:17] so i'm downloading an iso of debian 2.2 (potato, from 2000), just for fun... see how much things have changed between then and now. [02:18] [sorry for redundant if it is, wasn't sure if it was set to block whne i wasn't on my registered nick] [02:18] <|m0r0n> mow: I can get great speeds on torrents and on speedtest.net, but loading pages takes forever [02:18] anyone know if it's possible to get virtualbox guest extensions on such an old system? [02:18] i still haven't fixed my deleted partisions because i dont know how to work well even find/download/install testdisk [02:18] grturner: Just do it [02:18] vox: got it :vga=788 [02:19] WanHouse, why. the debate is where the fun is [02:19] If Someone using OVI Suite And Content Copier PLEASE PME ! Thanks alot . [02:19] grturner: Hmm, ill have to fiddle more with the GNU kernel i think. [02:19] grturner: Use the debate, debate won. [02:19] right now i'm debating b/t hurd and plan 9 [02:19] wow, virtualbox doesn't even list support for even running kernel 2.2, only 2.4 and 2.6 [02:19] ok audacious is in the usr/local/bin/audacious but they are locked....can't delete them [02:20] !testdisk [02:20] Sorry, I don't know anything about testdisk [02:20] m0r0n > cat /etc/resolv.conf and make sure that ip is there [02:20] any idea why I'd get a boot error after dding the UNR image to a usb stick? [02:20] Dayspring, you need to delete it from commandline using sudo becaue the executable is owned by root [02:20] anyone? [02:20] bueller? [02:20] :( [02:20] tuxotaku, did you write it on windows or ubuntu? [02:21] grturner: "PlanX"... hehe, well... use what works. Theory or the thing that works. [02:21] Dream-Ubu, I've tried both [02:21] still getting a boot error [02:21] so it's sudo apt-get remove ~/usr/local/bin/audacious ?? [02:21] download the image from ubuntu website, and write it using win32, you do that? [02:21] have you changed the order on the computer to boot from USB first? [02:21] what? [02:21] no [02:21] sudo apt-get remove audacious [02:21] well.. gnu works, plan9 works in theory [02:21] Dream-Ubu, yep [02:22] whats the error? [02:22] Dayspring: sudo apt-get remove audacious should work [02:22] Dayspring, no it would be sudo rm /usr/local/bin/audacious [02:22] Dream-Ubu, "boot error" [02:22] Dayspring: sudo apt-get remove --purge audacious [02:22] what? [02:22] that's all [02:22] lol [02:22] no number? [02:22] gr? [02:22] nope [02:22] I was gunna say [02:22] don't EVER remove it like that [02:22] boots into windows fine [02:22] Dayspring: you dont need sudo. Its rm -rf ~/usr/local/bin/audacious (For a single file its just rm /Path/To/File) [02:22] IdleOne, he's trying to remove a version of audacious that he compiled and installed [02:22] sheebus [02:22] grturner: ahhh that is a different story [02:23] Hey, need some help with my grub loader. I created a partition (apparently as primary partition) and now its trying to boot from there. How can I change the boot from sda1 to sda3. [02:23] can someone please help me activate my 3d acceleration? I'm using an intel 950 card with ubuntu 9.04. I installed x 2.4, but its still real slow. [02:23] Dayspring: follow grturner [02:23] hi guys . im having some odd bug when trying to install any package . every time i got this message . http://pastebin.com/m7f245d5 .. Can u help me ? [02:23] tuxotaku :) i have no clue :) i broke mine [02:23] Dayspring: To remove an entire package as you probably want to do, its: apt-get remove audacious [02:23] m0r0n > is the ip in your resolv.conf [02:23] I have a problem when I reboot my computer with a scanner attached (via usb) the permissions are not correct for /dev/bus/usb/003/002 they are rw-rw-r-- :( what I need is rw-rw-rw- do I need to look and udev or hal rules ? [02:23] bekommt hier jemand eine g41 ( intel ) zum laufen ( jaunty ). Ich hab nun auf den .31 kernel gewechselt, nun startet X11, aber nur bis maximal 800x600 und ich bekomme immer noch (EE) intel(0): Bad VBT signature [02:24] is there a way to track down the default appearance settings of jaunty so i can apply it to beta? if not can someone with jaunty look for me please? [02:24] hello can anybody give a partition recovery software [02:24] i already removed audacious that way....now i have audacious 2.2 hanging around....doesn't even work right [02:24] !de | EugenMayer [02:24] EugenMayer: In den meisten ubuntu-Kanälen wird nur Englisch gesprochen. Für deutschsprachige Hilfe besuchen Sie bitte #ubuntu-de, #kubuntu-de, #edubuntu-de oder #ubuntu-at. Geben Sie einfach /join #ubuntu-de ein! Danke für Ihr Verständnis. [02:24] entschuldigt. [02:24] alguém que fala Portugues ? [02:24] sorry [02:24] !pr [02:24] Sorry, I don't know anything about pr [02:24] hi, please where are located the nvidia drivers? [02:25] !pt [02:25] Por favor, use #ubuntu-br para ajuda em português. Para a comunidade local portuguêsa, #ubuntu-pt. Obrigado. [02:25] !pt [02:25] thank you durt [02:25] ;) [02:25] is it true that with grub you can only boot linux live cd's? [02:25] where are the nvdia drivers located? [02:25] LinuX2half: no it isn't [02:25] any help is much appreciated. please anyone? [02:25] in the system? [02:25] tell me a name of partition backup and recovery manager which support all typw of filesystem [02:25] Hey, need some help with my grub loader. I created a partition (apparently as primary partition) and now its trying to boot from there. How can I change the boot from sda1 to sda3. [02:25] is there a way to track down the default appearance settings of jaunty so i can apply it to beta? if not can someone with jaunty look for me please? [02:26] I can't seem to boot my windows Cd...for some reason. [02:26] !partimage | Whiper [02:26] Sorry, I don't know anything about partimage [02:26] so .. i need help in English or Portuguese . can anybody help me ? i have this message every time i install a package . http://pastebin.com/m7f245d5 [02:26] I was wondering if anyone had found a fix for the missing Rhythmbox plugin ID3 tag demuxer [02:26] ok [02:26] but how to use it [02:26] LinuX2half, did you check your bios settings? [02:26] i am not getting any application in application column [02:26] it says no such directory [02:26] Whiper, just do a sudo apt-get install partimage. [02:26] then.. let me find the link. [02:26] LinuX2half, it may be a disc drive detection problem. if its a laptop have you drained your battery? that worked for me once [02:26] in terminal is that correct [02:27] how do I make terminator transparent? [02:27] omlette will that recover the rules that you set? the sizes n stuff? [02:27] Yes, but I think my computer isn't "design" to boot from CD..... [02:27] Whiper, yes. [02:27] Dream-Ubu, what do you mean? [02:27] Notice: Undefined offset: 1 in /var/www/public_html/ZephyrNetwork.ca/public/ZephyrBot/phpbot.php on line 69 [02:27] any idea what this may mean? [02:27] Whiper: http://www.psychocats.net/ubuntu/partimage <-- How to use partimage. [02:27] Linux, you have to tell it to. [02:27] LinuX2half, have you tried installing with a usb flash drive? [02:28] omlette: i kind of whiped them,but they're still there cos grub was, error 22...so [02:28] LinuX2half, its easy with unetbootin or usb startup disc creator [02:28] LinuX2half, can your disc drive read discs right now? [02:28] is there a way to track down the default appearance settings of jaunty so i can apply it to beta? if not can someone with jaunty look for me please? [02:28] Omlette: thankyou very much yaar does it support fat16 and fat32 and ntfs [02:28] Dream-Ubu, it might. I don't know. [02:29] oorah: its a CD-R but whenever I insert the disc Ubuntu read it as an blank cd-r [02:29] Omette, thanks i'll look [02:29] Whiper, I backed up an ntfs partition with it, but I haven't tried fat16 or -32. However, I believe it will work. [02:29] LinuX2half, oh ok so your disc drive is detected thats good [02:29] how do I make terminator transparent? [02:29] Whiper, the website is www.partimage.org [02:30] LinuX2half, maybe there is a button you have to press at startup. it will usually tell which one at the bottom of the screen [02:30] wow, does anyone remember XFree86? [02:30] !help [02:30] Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) [02:30] I mean, I guess it's still around technically [02:31] oorah: well I don't see no option from my BIOS startup screen [02:31] a_: you talking to me? i was just making conversation [02:31] i'll go to -offtopic i guess [02:31] alright!! i got it fixed....thanks a ton guys [02:31] Random832: no, I just made a mistake [02:31] LinuX2half: you should be looking for boot order, or boot devices, or something like that. [02:31] hi folks, i just got a new ip for my server. when i try connecting to it via http it times out. i have setup teh virtual host and everything correctly and restarted apache. [02:31] LinuX2half, i'm out of ideas. its usually a function button, maybe you should try repeatedly pressing one of them until one maybe works [02:32] how do i make xchat look normal [02:32] LinuX2half, what kind of computer do you have? [02:32] now, does anyone have any ideas of what i should do to get audacious 2.1 to work on my computer?? [02:32] oorah: sony [02:32] like with the user list on the right and the buttons and tabs [02:32] how do you edit the firewall in ubuntu to allow teh new ip to work ? [02:33] LinuX2half, oh sorry i wouldn't know then. i have an msi. perhaps you can call sony about it or check their website or google it [02:33] lakotajames1: oh? Then how do I found out what boot device I had? [02:33] is there a way to track down the default appearance settings of jaunty so i can apply it to beta? if not can someone with jaunty look for me please? [02:34] oorah: thanks anyway [02:34] LinuX2half: did you actually get to the bios screen? did you ever get to a menu that opens before windows starts? [02:34] *raises hand* im not completly lost...i'm going to use the incorrect term...ive removed the rules of my partisions, grub gives me error 22, i tried to resize my linux partition but i wiped the lot meaning the data is there but the thing that sets them isnt...what do i do? and i'm in need of a step by step [02:34] i am lost...not im not lost... [02:35] is there a way to install default themes of previous versions of Ubuntu? [02:35] lakotajames1: yes I press F2 to go to the Setup Screen...but my bios had little power over my comptuer........ [02:35] oorah: the default theme in Jaunty is the Human theme. not sure what else you want to know [02:35] when i go to http://domaintoip.com, and type my new domain, it points to the correct new ip. however http://newip will connection time out [02:35] IdleOne, the colors [02:35] LinuX2half: are there any more menus than the first one? [02:36] LinuX2half: like, is there more than one tab? [02:36] oorah: will a screenshot do? [02:36] What sources are enabled by default? main and restricted? universe and multiverse is optional? [02:36] Dream-Ubu: if you've deleted the partitions, it's basicly impossible to get the data back again [02:36] lakotajames1: yes more than one tab listing security, boot, general ...etc [02:36] IdleOne, i meant the numbers i need to input [02:36] Dream-Ubu: time to start again from scratch [02:36] LinuX2half: it should be under boot. [02:36] the # and what is after [02:36] <|m0r0n> mow: Sorry for the long reply, no it's not [02:36] vox, removed the rules..not deleted as in kicked the data out the window [02:37] Dream-Ubu: what do you mean "removed the rules" [02:37] LinuX2half: what are your choices under boot? [02:37] oorah: ok gimme a minute and I'll get them for you [02:37] IdleOne, oh ok thanks [02:37] |m0r0n > for a simple test use the ip in your browser, not the .com name and see if it's faster [02:37] lakotajames1: Optical Drive, Floppy Disk, Hard Disk, Network [02:37] vox: the code that says what size each is [02:37] LinuX2half: you need to make Optical Drive boot first. [02:38] vox: erm...OH! fill a split glass with liquid, and remove the splitter... [02:38] vox: that kind of thing... [02:38] |m0r0n > ie.. www.goog.com use 212.227.93.146 [02:38] vox: anything? make sense yet? [02:39] oorah: Windows: #EFEBE7 #101010 Input Boxes: #FFFFFF #1A1A1A Selected Items: #FFA443 #1A1A1A Tool Tips: #F5F5B5 #000000 [02:39] lakotajames1: Yes its in default order with the optical drive input first [02:39] Dream-Ubu: you've removed the partitions [02:39] IdleOne, oh ok thanks [02:39] vox: yes but the data is there, grub shows so i know it is [02:39] how to change group membership of a file? [02:39] oorah: hope that helps [02:39] LinuX2half: if that is first, the disk should boot. are you sure you burned the iso correctly? [02:39] Dream-Ubu: if by 'rules' you mean the partition table, saying where each partition started and ended oon the disk, it may be possible to recreate the table, and access the data again, if you know the *exact* details of your partition [02:40] Dream-Ubu: grub sits in the Master Boot Record. what does it say when it tries to boot? [02:40] vox: error 22 [02:40] lakotajames1: it worked in my other dell computer [02:41] LinuX2half: hmm. are you sure that there isn't some sort of option you have to enable on the optical drive setting in the bios? [02:41] losha: i have a rough idea, 30gb to ubuntu a bit to linux swap(ubuntu default) how ever much grub gives itself by default and 90gb to windows... [02:41] omg the past couple of days with 9.10 beta have been horrible. but i am up and running again. Can someone tell me how to get my scroll wheel on my mouse to flip my desktop again? for some reason its not working anymore. I can still go to the cube mode. but i think the shortcut is missing, and I dont know where to find it. I installed compiz-settings-manager again.... [02:41] losha: i know ubuntu was 30gb...ive reinstalled it twice, same amount both times [02:41] !karmic | maxxist [02:41] maxxist: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [02:42] lakotajames1: well the options are disable or enable device.... [02:42] maxxist: you want #compiz for that [02:42] Dream-Ubu: I doubt a 'rough idea' will be sufficient. But check out testdisk http://www.linux.com/news/enterprise/storage/8257-how-to-recover-lost-files-after-you-accidentally-wipe-your-hard-drive [02:42] LinuX2half: is it enabled? [02:42] KiRiLoS, i know its beta. I knew it might break. but its working fine now. [02:42] i tried testdisk, it wouldnt do anything cos i had no clue what to do [02:42] wheres the file where u can edit what comes up at startup [02:42] Dream-Ubu: you've deleted part of the hard-drive structure. it's not really recoverable from what you've done. [02:43] lakotajames1: yes it is, if it's not that there's a proclamation point.... [02:43] maxxist, what i meant is that you may need to ask that question @ #ubuntu+1 and not here [02:43] LinuX2half: proclamation point? [02:43] ! [02:43] <|m0r0n> mow: goog.com is taking about 10-15 seconds to load a search result [02:43] vox: perfect :) i am screwed basicly, right? unless i work out the exact sizes [02:43] lakotajames1: if the device is disabled.... [02:44] KiRiLoS, on it thanx. [02:44] LinuX2half: Oh! ok. sorry, I had misunderstood you. :p [02:44] lakotajames1: maybe I need to boot the CD without restarting... [02:44] |m0r0n > did you use the .com name? [02:44] LinuX2half: I have no idea. I've told you every thing I know :p [02:44] Dream-Ubu: not just exact size, but you'd need to put the partition back in the /exact/ same physical space on the drive. [02:45] LinuX2half: is this the official windows cd you are trying to boot from? [02:45] <|m0r0n> mow: Not sure, I just typed in that IP and got sent to that site [02:45] Hey gang [02:45] idleone: its an copy [02:45] LinuX2half: oh, are you sure that the drive works? [02:45] |m0r0n > was that faster? [02:45] I am new 2 ubuntu.....do I need to defrag my ext3 drive? [02:45] ldleone: an copy [02:45] greensimian: nope [02:45] Dream-Ubu: if you're going to try and re-size your drives, use "gparted" to do it. [02:45] no need to defrag [02:45] greensimian: no :) [02:45] greensimian, nope it does it on its own. [02:45] vox: erm, grub-windows-ubuntu-swap < like that? [02:46] Like magic [02:46] <|m0r0n> mow: Google itself searches faster, but when I go to click on a link it's slow right away [02:46] They say you don't need to defrag NTFS either but that's a load of hooey [02:46] Dream-Ubu: i have no idea how your drive was set up previously. [02:46] vox: that was the order there where shown when ii went to expand ubuntu but i wiped the table, its now blank unalocated space [02:46] |m0r0n > right, because it has to query the dns server again [02:46] whats the file i edit for startup services ?????????????????????? [02:46] greensimian: that is correct [02:46] Dream-Ubu: if you had made a copy of the partition table, and made no changes after deleting it, you could probably get your data back. But if testdisk won't recover it, I don't know what else to do... [02:46] i did add group xxxx in Admin->Users and groups. Then i did: chown :xxxx file . but ig get group not valid? [02:46] lakotajames1: Great Question, the Lice CD works when I was in the GRUB process of selecting a partition or maybe RAM converting part......I just press F12 [02:46] sebsebseb: i need to get this to work for a match i have tonight i have instructions on how to do it normally but its when i try to do it all through console i get hung up [02:46] |m0r0n > sounds like dns problem [02:46] Dream-Ubu: then it's completely hosed. start again. [02:47] <|m0r0n> mow: Is there any auto-repair that I can try or what should I do next? [02:47] <|m0r0n> mow: Primary DNS 192.168.1.1 (My router) [02:47] |m0r0n > edit your /etc/dhcp3/dhclient.conf with pico or vi [02:47] LinuX2half: hmm. I don't know then. *shrugs* :( [02:47] |m0r0n > add this line to the end of the file [02:47] lakotajames1: I'm not sure if the Drive is working properly..though [02:48] Deaglebear: I already replied to you earlier, and said that I didn't know [02:48] vox: and in doing tat my data will be lost so, is there no way i can put another grid with the same sizes? like you would a piece of tracing paper over a picutre? (sorry about the explinations after but it seems to make sense) [02:48] LinuX2half: you might steal a drive from your other compy, if you have one. [02:48] |m0r0n > prepend domain-name-servers 4.2.2.1,4.2.2.2; [02:48] whats the file i edit for startup services ?????????????????????? [02:48] FMsoundmaster45, i believe you want to use the chgrp command - not chown [02:48] <|m0r0n> mow: Anywhere speific or? [02:48] |m0r0n > then restart the network or reboot [02:48] |m0r0n > at the end of the file... last line [02:49] <|m0r0n> mow: Woops, sorry. [02:49] <|m0r0n> mow: Let me restart, brb [02:49] o [02:49] |m0r0n > that will add those ip's to your /etc/resolv.conf when network restarts [02:49] Dream-Ubu: i understand what you mean, but without knowing the EXACT location and size of every partition, and knowing exactly where(physically) on the disk those paritions resided, it is impossible [02:51] Dream-Ubu: any data that was on that drive is now essentially lost [02:51] vox: i remember where they where but how do i do it? [windows recovery HD0,0 win xp hd0,1 ubuntu hd0,4 (ubuntu recovery not a clue) [02:51] Dream-Ubu: no, you remember the /order/ they were in [02:51] vox: and the sizes i remember [02:51] vox: but physicaly on the disk if i could touch them, no i dont [02:51] Q: anyway to make Jaunty beep a sound when USB inserted ? like Windows [02:52] hola [02:52] lakotajames1: the could you describe the procedures of how the CD interact with the computer.....? [02:53] LinuX2half: I don't know what you mean, sorry :( [02:53] this is a just english chat ? [02:53] Dream-Ubu: thats my point. disk partitions are the linch-pin of a hard drive. if they are disrupted or changed in any way, without knowing EXACTLY what you're doing, the entire drive is hosed [02:53] IdleOne, is there any way to change the scroll bar that moves vertical to the right of the open windows to orange? [02:53] tute: yes. for spanish #ubuntu-es [02:53] vox: ok, i get it now [02:53] lakotajames1: Like when you insert the CD and reboots, whats happening "inside".... [02:53] Dream-Ubu: despite what you may think, hard drives aren't really like tracing paper... [02:53] Dream-Ubu: i've been a linux sysadmin for nearly 10 years, and stay very, very, very far away from changing partition sizes [02:53] ok, [02:53] oorah: I would'nt know. [02:54] vox: *salutes* ok sir [02:54] IdleOne, its ok thanks, i can deal with the gray bar lol [02:54] LinuX2half: the computer should boot from the cd instead of the harddrive. [02:54] hi [02:54] Dream-Ubu: all it takes is for one tiny, little, minute thing to not be exactly right, and you lose all your data [02:54] loha: it was an analergy, i was referencing the "rules" as i call them... [02:54] "joebodo: thanks [02:54] i wish i knew if there was a way to change the color of the vertical scroll bar to the right of open window boxes [02:54] how can I install the nVidia display drivers and reconfigure the display configuration for gnome so my xorg works? [02:55] lakotajames1: I'm trying to ask do you know whats happening at the "inside", which means for example the CD load the data and turn to RAM..etc, [02:55] losha: i was thinking it was a grid, you slot it back over problem solved, like a map [02:55] lakotajames1: like in technical phases... [02:55] LinuX2half: oh, I don't know. sorry. :( [02:55] I was trying to run a raid 1 on a virtual machine (Vmwamre over XP) has anyone acomplish that task satisfactorily [02:55] ? [02:55] lakotajames1: thats alright maybe online knows the answer, wikipedia..... [02:55] lokian: he was using an analogy, i knew what he was getting at :) [02:55] mow: http://212.227.93.146/ is still doing the 10-15s searches [02:56] vox: so it did make sense to you :) [02:56] oorah, try gnome-color-chooser [02:56] Dream-Ubu: of course [02:56] m0r0n > cat /etc/resolv.conf ... are the ips there [02:56] joebodo, is it an app? [02:56] lakotajames1: One last question, whats the difference between an OEM disk and an installation disk? [02:56] vox: woo! my crazyness can be useful...now...wheres my harddrive lab... [02:56] Dream-Ubu: your idea is, essentially, correct. however, you need about 10-times more detail in your tracing paper in order to do it [02:57] oorah, yes - it is for changing specific parts of the UI [02:57] joebodo, ok thanks installing now [02:57] joebodo, is it gui? [02:57] oorah, yup [02:57] vox: lol, i can remember the sizes and the order they showed in gparted and the order they where listed in grub but... [02:57] oorah, it's pretty nice actually [02:57] joebodo, where is it saved at? [02:57] anyone familiar with setting up second lirc as ledxmit? I am having a problem compiling it [02:57] mow: http://paste.ubuntu.com/293601/ Is all I have [02:57] oorah, you'll find it under preferences [02:58] Dream-Ubu: and that, unfortunately, isnt enough :) [02:58] Can someone tell me if there is an open source option for something like camtasia studio for windows that allows audio, and video capture for creating presentations/training? [02:58] joebodo, oh ok thanks [02:58] vox: including the HD0,X but you're saying that makes no difference... unless i know that its like...2 cm in from the center [02:58] LinuX2half: install disks install the clean version of the operating system. OEM disks install Dell's version, for example. Has Dell branding. I think it will only work on the computer it came with, not sure though. [02:58] sudo chgrp scanner /proc/bus/usb/008/002 chgrp: not valid group: «:scanner» [02:58] m0r0n > so they are there [02:59] Hi [02:59] LinuX2half: the OEM wouldn't have to be dell, could be HP, or some other company. [02:59] m0r0n > and your web pages are still slow? [02:59] I have read the fucking manual and I couldn't mount a raid 1 on a vmware (ubuntu on XP host), can someone help me? [02:59] mow: Extremely slow [02:59] m0r0n > that was your /etc/resolv.conf file right [02:59] can anyone help me, I had ubuntu and windows xp running on my laptop. [02:59] tute: if i could i would but is there need to swear? [02:59] lakotajames1: so they both install a clean OS...? [02:59] I had to re-install windos xp for reasons [03:00] and now I dont see Operating System choices [03:00] when I boot my pc [03:00] mow: Yes sir [03:00] !grub | guest2 [03:00] guest2: GRUB is the default Ubuntu boot manager. Lost GRUB after installing Windows? See https://help.ubuntu.com/community/RestoreGrub - GRUB how-tos: https://help.ubuntu.com/community/GrubHowto [03:00] any help ? [03:00] Dream-Ubu: what's required to put the partitions back exactly how they were would be akin to kicking a sandcastle, then trying to put each grain of sand back where it was to re-make the castle. [03:00] guest2: When you go all the way to the bottom it's not there? [03:00] m0r0n > sorry that was my best idea why it was slow... other then maybe your isp provider is having problems [03:00] LinuX2half: the OEM will have branding, and the drivers for the computer it came with. I think... You might look that up too, I'm not sure. [03:00] joebodo, which selection is for the scroll bar? [03:00] m0r0n > try pinging some sites [03:00] oorah, specific tab [03:00] LinuX2half: you should only use the OEM on the computer it came with. [03:00] tute: dont swear, thanks [03:00] vox: that makes more sense now ^^ [03:00] mow: on speedtest I can get 40 [03:00] m0r0n > see if your losing packets [03:01] joebodo, i'll try that thanks [03:01] mow: How do I check if I'm losing packets? [03:01] lakotajames1: I need to order actually, I deleted my windows partition along with the recovery partition :( [03:01] vox: only 120,000,000,000,000 bytes to put back! [03:01] m0r0n > in a terminal ping www.yahoo.com or some other site [03:01] Dream-Ubu: exactly [03:01] lakotajames1: well thanks for the info. [03:02] LinuX2half: your welcome. [03:02] vox: no, 120,000,000 not a 120Tb :P works if we worked on a bit level... [03:02] hi what program can i use to save the video coming out of my capture card ( from composite ) ? [03:02] m0r0n > pastebin the results [03:02] mow: Is it infinite or should I wait till it stops [03:02] shiznebit, ffmpeg is one of the options, but its command line [03:02] i had tvtime play the video from composite source, but i couldn't save it [03:02] m0r0n > you have to stop it ctrl c [03:02] byebye windows for good it seems [03:03] Dream-Ubu: i accounted for re-writing some of it :P [03:03] usser, i'd prefer GUI [03:03] mow: http://paste.ubuntu.com/293602/ [03:03] Vox: you wrote gparted? [03:03] vox: well, assisted in the writing... [03:03] Dream-Ubu: not at all [03:03] shiznebit, winff is a ffmpeg gui, not sure if it has capture options though [03:03] mow: http://paste.ubuntu.com/293603/ [03:03] m0r0n > looks good to me... what was the last line [03:04] Dream-Ubu: it's just an easy-to-use and fairly bulletproof disk management utility [03:04] when I try to run this i get compile errors anyone ever set this up its a remote to change channels on a digital box./myth-ledxmit82.sh lirc-0.8.2 [03:04] vox: and i went wrong! you didnt make it windows enough(stupidity proof) [03:05] usser, is their anyway to get tv-time to capture the output [03:05] Dream-Ubu, gparted is as stupidity proof as it gets [03:05] vox: [BIG BUTTON] (label - click if you think you're cool) [03:05] shiznebit, tvtime cant record, sorry. [03:05] m0r0n > try another browser and see if it's any faster [03:05] is there anything with a gui and can record [03:06] what a PITA [03:06] usser: i'm a custom make of stupid, i think i know what im doing, and i sign through the dotted line [03:06] Hi, really silly question, but I'm using jaunty, and avahi keeps overriding /etc/network/interfaces for eth1. How can I disable it for this interface (it doesn't appear to have a service defined for it in /etc/avahi/services) [03:06] mow: http://paste.ubuntu.com/293605/ [03:06] Dream-Ubu: next time you wanto resize a drive, do a google search on something like "gparted resize drive" or some such [03:06] Dream-Ubu: find a good how-to, and follow it [03:06] here's a partition question: i have an Iomega usb external hard drive (1.5 terabytes) that i formatted to ext3 using mkfs.ext3. It mounts and works fine (and ''mount'' shows it as ext3), but ''sudo fdisk -l'' shows it as "HPFS/NTFS", not ext3. So does gparted. Should I care? [03:07] vox: or, play around n go wrong again :) and then learn, now...where did i put my invisable back ups... [03:07] mow: Browser, as in Opera? or something? [03:07] Dream-Ubu, hehe [03:07] m0r0n > yes... that ping is fine [03:07] m0r0n > that should tell if it's firefox or something else [03:08] mow: What other browsers are avaliable on Ubuntu [03:08] m0r0n > opera is [03:08] m0r0n: iceweasel, lynx, links, opera, firefox [03:08] m0r0n > sudo apt-get install opera [03:09] sudo apt-get install opera [03:09] Probably a whole heap more too [03:09] Doesn't work [03:09] m0r0n, there's probably about 25 different browsers [03:09] ah well, the magic "install" button on the desktop... i wounder if i'll go wrong with that :) [03:09] mow: joebodo: joebodo: E: Package opera has no installation candidate -- Opera [03:09] for opera, you probably have to add their repositories [03:10] ah jeez, need to install amsn-svn again...that was so annoying! [03:10] hi Q: anyway to make Jaunty beep a sound when USB inserted ? like Windows [03:11] http://vk.com/reg4746885 - free.mp3 === dav_ is now known as dirtydav [03:11] How do i run as root all the time? is this possible? or at least to make my user name root all the time. [03:11] m0r0n > konqueror should be installed under internet tools [03:12] m0r0n > use that [03:12] dirtydav: That's a silly thing to do [03:12] Don't do it [03:12] dirtydav: not recommended, and definitely not assisted in this channel. [03:12] vox: thanks for your help, next time, i'll read first [03:12] i understand the risks [03:12] m0r0n > applications>internet [03:12] So my son was playing around with his computer. Specifically gparted and happened to erase his MBR. Anyone know a tool that will scan a hard drive and rebuild the MBR? [03:13] the root and user is very annoying [03:13] mow: Installing [03:13] dirtydav: If you don't know how to do it, you don't have enough experience to understand the risks. [03:13] dirtydav: you have to set the root password [03:13] Which channel is for talking about 9.10? [03:13] vox: "how much (in%) do you want for your ubuntu partition" < hm...100%? i have no choice :) all my disk or,,,all my disk? [03:13] m0r0n > brb getting food [03:13] I have a 500Mhz computer with a 512 MEG harddrive, I am looking for a Free Desktop. Any Ideas? [03:13] and enable logging as root in gdm ;f [03:14] !grub | rwood [03:14] rwood: GRUB is the default Ubuntu boot manager. Lost GRUB after installing Windows? See https://help.ubuntu.com/community/RestoreGrub - GRUB how-tos: https://help.ubuntu.com/community/GrubHowto [03:14] !koala | gbear14275 [03:14] gbear14275: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [03:14] joebodo: thanks [03:14] ardor, debian lenny [03:14] What is the reason for users? i know its about security but im not that paranoid... [03:14] dirtydav: Doesnm [03:14] ardor, oh wait 512 meg hdd. dsl then [03:15] dirtydav: Doesn't matter if you're not paranoid, people are still out to get you [03:15] ubottu can grub scan for all my lost partitions. fdisk -l returns nothing. [03:15] Error: I am only a bot, please don't think I'm intelligent :) [03:15] rwood: you've lost your partition table then, not your MBR [03:15] How can I make sure java is installed, I am getting into trouble when trying to access my bank account using firefox, and the help desk says they do not provide support for linux... [03:15] I stand corrected. Is there a way to restore a partition table? [03:16] coolcat, open terminal type java --version [03:16] rwood: testdisk? :f [03:16] mow: Slower on loading pages, faster on searches [03:16] coolcat: which bank? [03:16] coolcat, what does it tell you? [03:16] coolcat: usaa by chance? [03:16] rwood: Google for gpart [03:16] I am going with puppy linux, sounds really cool [03:16] It can search for partitions [03:16] k, I'll try. [03:16] m0r0n > I'm out of ideas for the moment if that didn't speed things up [03:16] More info here (but may be out of date): http://www.faqs.org/docs/Linux-mini/Partition-Rescue.html [03:17] ardor puppy is great [03:17] coolcat, java -version sorry [03:17] mow: Thanks anyways [03:17] hm, pritty nifty, i can work and install at the same time... i like that...nice work ubuntu people [03:18] usser, gbear14275 it simply ask me to fill something that has already beem filled and continues issuing the same error. [03:18] usser, I get errors: "Unrecognized option: --version [03:18] Could not create the Java virtual machine." [03:18] coolcat, java -version my bad [03:18] mow: What time are you usually on IRC, I want to try my dad's windows machine and compare later [03:18] m0r0n > tracepath a page that loads slow and see if there is a slow node [03:19] Dream-Ubu: check out the link above from ChesFTC_. It talks about recovering partitions when you don't have a partition table... [03:19] usser, java version "1.6.0_0"OpenJDK Runtime Environment (IcedTea6 1.4.1) (6b14-1.4.1-0ubuntu11)OpenJDK 64-Bit Server VM (build 14.0-b08, mixed mode) [03:19] m0r0n > I'm always on... just not aways watching [03:19] Nobody knows how to disable the avahi autoip thing for an interface? [03:20] losha: oops....im sort of just doing a whole install now...i'll live without the "data" i lost... its just your standard music n picutres and whole windows install ^^ [03:20] coolcat, make sure you have icedtea6-plugin package installed [03:20] losha: but i'll read anyway - good knowledge to have [03:20] coolcat, that should take care of all things java on your computer [03:20] mow: Ok, maybe I'll see you tomorrow thanks again, later [03:21] Dream-Ubu: sorry, I'd never seen the link before or I'd have said... [03:21] losha: i dont worry about it :) i didnt pay attention or know how to word my problem === shaneoc__ is now known as shaneoc [03:22] losha: besides, 3 computers im bound to have more than ONE copy of my pictures [03:22] usser, I will try to install it via apt-get and will let you know [03:22] losha: if i dont...my loss my stupidity more fun! [03:22] * prince_jammys is suspicious of such nonchalance. [03:22] if i lost all my music+pics, i'd strangle someone. [03:22] usser: coolcat: I actually prefer the official java package to icedtea... [03:23] gbear14275, official java doesnt run on 64 bit which is what he has [03:23] hello [03:23] anyone heard of ubuntu suddenly dropping sound card drivers [03:23] usser: coolcat: looking it up... firefox being slow [03:23] i have a dell dimension e531 [03:23] prince_jammys: the music can probably be replaced, albeit at some cost. But pics... [03:23] please help! I try to change my permissions with chmod to make my external drives writable, but it doesn't work! [03:23] ChesFTC: I think I found testdisk in the repositories, any reason why I shouldn't try it? [03:24] does anyone know how I can remove buttons from my playlist window in smplayer? i can find where to edit the toolbars for the main window in the smplayer.ini, but nothing for the playlist [03:24] anyone have any wierd problems im new to ubuntu but glad to help [03:24] losha: infact im glad you didnt know that link excisted... [03:24] Hello, I installed ubunto on my netbook. I connect with my wlan, the router give an IP to my Netbook and the IP's and DNS are correct [03:24] but i cant open a webpage [03:24] rwood: Because you could always fry your hdd? === LjL-Temp is now known as LjL [03:24] rwood: That said, it looks much better than my suggestion [03:24] rwood: Well done on finding it - I'll add it to my list of useful tools :) [03:25] anyone know if there's a package in the repos of an app that's like buubot in ##javascript, so i could type something like jseval (javascript stuff here); and have it give the output in a terminal? [03:25] ChesFTC: I'll let you know how it goes. [03:25] rwood: I'd give it a go, but if your data is worth a lot of $$$, image the disk first, using dd onto a file on a larger disk [03:25] is it possible to change the scrollbar color? [03:25] the reason i want to remove buttons from the playlist in smplayer is so that i can shrink the window smaller, if someone knows where i could edit files to make that possible without removing buttons that is just as well [03:26] ChesFTC: I already did the image. Here goes nothing. [03:26] Good luck! [03:26] How do I fix my graphics drivers? On windows, my resolution was 1024x768, but my maximum now is 800x600. [03:26] ChesFTC_: Thanks for your link. There are so few recourses when a partition table is lost, so it's particularly interesting... [03:26] gbear14275, you mean the package sun-java6-plugin? I am trying it [03:26] losha: Yeah, I earn a good supply of grog and movie tickets for rescuing data for friends :) [03:26] what is the best way to send files to another distant machine? [03:26] It's always good to learn of another tool [03:26] usser, it was already installed I am going to try suns java to see [03:27] i'm trying to use AIM via pidgin, but im not having much luck connecting to my other comp [03:27] does anyone know about drivers for the following laptop: Asus N61VN ? [03:27] coolcat, ok [03:27] fmagno: Isn't that an NVIDIA card? [03:27] is it possible to change the scrollbar color? [03:27] Night everybody [03:27] i wonder if anyone could help me [03:28] ChesFTC_, yes, but my ubuntu cant find any drivers... :( [03:28] usser, thak you anyaway. It seems it is 64bit-incompatible, since other users do not have problems... [03:28] maybe this laptop is too new [03:28] with a spam nag on pidgin [03:28] is there any advantage to a terminal based or gui based irc client [03:28] coolcat, no problem. ditch the bank, if they insist on you using java on the client side === iarp_ is now known as iarp [03:29] usser: coolcat: was originally following a slahdot article on it... which leads to this page (http://www.phoronix.com/scan.php?page=news_item&px=NjkyOQ) but the sun page linked too... seems to be now devoid of the plugin... although I may be blind. That is how I came across 64bit java sun plugin [03:29] !mint [03:29] There are some Ubuntu derivatives that we cannot provide support for due to repository and software changes. Please consult their websites for more information. Examples: gNewSense (support in #gnewsense), Linux Mint (see !mintsupport), LinuxMCE (support in #linuxmce), crunchbang (support in #crunchbang) [03:29] webbb82, terminal based irc can run pretty much anywhere. no matter how messed up your pc is if its got network you got irc [03:29] hello! [03:29] is it possible to change the scrollbar color? [03:29] !mintsupport [03:29] Linux Mint is not a supported derivative of Ubuntu, please seek support in #linuxmint on irc.spotchat.org [03:29] anyone available for giving some advice/help? [03:30] Hello, i connect to my wlan but have no connection to the internet, what could be the problem? [03:30] anyone have a client idea for file transfers? [03:30] !ask [03:30] Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) [03:30] usser: coolcat: Or try and get your bank to support linux like I'm doing... hopefully. [03:30] ubottu high five [03:30] Sorry, I don't know anything about high five [03:30] lifesengine, ssh would be by far the simplest and most secure way [03:30] I'm getting this nag-bot-message when using Pidgin [03:31] usser: i don't have an active ftp [03:31] lifesengine: how big a file? One time or multiple times. What's on the remote end? [03:31] lifesengine, ftp and ssh are two different thing you dont need one to use the other [03:31] i have prblems with my usb scanner [03:31] lifesengine, both machines run linux? [03:31] gbear14275, I called them, the said they didn't support linux ... there's not a lot I can do, unfortunately [03:31] no, mine is linux, sending to a windows latptop [03:31] the file is about 230mb [03:32] oorah, you change most of the colors on the specific tab - other colors are in the engine tab [03:32] losha: multiple times is ideal [03:32] ive been trying to use aim to transfer but i cant get connected [03:32] lifesengine, install openssh-server on your machine, create a temp account for the windows machine. tell the windows end to install psftp(part of putty) [03:33] hi people... can any one, help me to install a network card in ubuntu 8.10 [03:33] coolcat: I opened up a support ticket and asked if they supported macs. If they did then they supported linux and just didn't realize it. It took a bit to find someone to listen but they are working with their technical people now to remove a user agent restriction which was locking out non-mac and windows users. [03:33] usser: thanks, is it easy to enough for the windows user to set it up? === Moon_Doggy_ is now known as Moon_Doggy [03:33] lifesengine: split the file into 2 and use rapidshare... [03:34] lifesengine, create a temp account on your linux box for the windows machine to use thats what i meant [03:34] looking for a good webcam prog for ubuntu-currently using cheese and a creative cam but pic stays fuzzy [03:34] losha: solid ideal, but i'm looking to possibly constantly have a flow of data back and forth [03:34] lifesengine, its relatively easy, you dont have to install psftp, just download and run executable on windows end, but they will have to know a couple of linux commands to initiate the transfer [03:34] anyone know how to remove buttons from the toolbar that is on the smplayer playlist window? [03:35] usser: well, the user on the windows end will need me to walk them through it step by step [03:35] * Take0n kalinyxta [03:35] lifesengine, if you want constant connection you can try openvpn but its a lot more harder to set up [03:35] lifesengine: usser's idea is good too, but needs a bit more setup... [03:35] running xsane in gimp gives: Failed to open device `epkowa:usb:002:008': Access to resource has been denied. I set permissions to /proc/bus/usb/008/002 to 777 How can i resolve this? [03:35] hey [03:35] is is fluxbuntu pretty much dead? [03:35] i really appreciate it, can you walk me through how to get the windows user connected to me [03:35] booting in recovery, it automatically starts checking /dev/sda7 with fsck, however it then overheats before it ever gets booted up, how can I keep it from doing that? [03:36] it won't let me press esc [03:36] lifesengine, sudo apt-get install openssh-server [03:36] !fsck [03:36] fsck is the FileSystem ChecKer, which runs automatically when you boot if you didn't shutdown cleanly. Type "man fsck" for information on running it manually. The command "sudo shutdown -F -r now" will force a reboot and a filesystem check; "sudo touch /fastboot" will skip a filesystem check at next reboot [03:36] lifesengine, create a user using system->administration->users and groups [03:36] hi [03:36] shane2peru, see that option for skipping file system check ? [03:36] osx5: we don't hear much about it here, but they say they're still alive... [03:36] god morning [03:37] lifesengine, tell the windows end to download psftp from here http://the.earth.li/~sgtatham/putty/latest/x86/psftp.exe [03:37] hi losha [03:37] losha: sucks to see that [03:37] joebodo: yes, but I can't even get it to boot up to get to terminal [03:37] hi boyam [03:37] sakthivel: where is .sg ? [03:37] cle [03:37] u? [03:37] shane2peru, hmm - possibly add some kernel options to the grub selection [03:37] joebodo: thanks for that though, I didn't know that before [03:37] clementi [03:38] boyam u from? === akgraner_ is now known as akgraner [03:38] how do have two computers and a KVM switch that allows you to quickly switch back and forth between Windows and Ubuntu using the same monitor and keyboard...? [03:38] joebodo: that is what I'm trying now, there used to be a way to add 3 an only boot to inti 3 and have terminal [03:38] sakthivel: we don't chat much here. Chat on #ubuntu-offtopic instead. Keep this channel clear for support, ok? [03:39] how can I change the default download manager to multiget [03:39] ok losha [03:39] what is a good tool to reconfigure the Xorg display? [03:39] hello ppl [03:39] gbear14275, sun's java didn't work ... [03:39] oh man, it's been a long time since i heard the term "download manager" [03:40] shane2peru, not sure if any of these help - but there's like 5 options : http://www.cyberciti.biz/faq/linux-unix-bypassing-fsck/ [03:40] aaroninfidel: nano [03:40] aaroninfidel: sadly, there seem to be no good tools for that. Or even mediocre ones... [03:40] coolcat: bummer [03:40] nvidia-settings [03:40] when my system starts ubuntu gives errors when trying to init a gnome session. [03:40] Need help with my Internet connection. Ubunto conect to the WLan but I cant connect to the Internet [03:40] !xdccfind rock 204 [03:40] Error: I am only a bot, please don't think I'm intelligent :) [03:40] shane2peru, possibly add this to the end of the kernel line: fastboot [03:41] joebodo: yeah, looking over it now, thanks for the link [03:41] aaroninfidel: sudo dpkg-reconfigure xserver-xorg reconfigures the xorg package. Your /etc/X11/xorg.conf is backed up with a different extension, and then overwritten. [03:41] hi I have a problem getting the realplayer plugin to work with firefox 3.5 in jaunty [03:41] I installed realplayer and checked to configure the plugin [03:42] but it doesn't appear in about:config [03:42] Wolfcastle: why do you need it? >: [03:42] DaZ: to listen to an online radio [03:42] can someone please paste me the link to how to recover my operating system choices on system BOOT [03:42] have reinstalled my XP [03:42] Wolfcastle: and mplayer plugin can't do it? :f [03:42] !grub | gues1 [03:42] gues1: GRUB is the default Ubuntu boot manager. Lost GRUB after installing Windows? See https://help.ubuntu.com/community/RestoreGrub - GRUB how-tos: https://help.ubuntu.com/community/GrubHowto [03:42] Thanks! [03:43] DaZ: haven't tried it. [03:44] where is the xOrg error log stored? [03:44] Wolfcastle: your linux will be happy. [03:44] aaroninfidel: /var/log [03:44] How I can test my W-Lan connection? Ubuntu shows me that I am connect but i have no access to the Internet [03:44] joebodo: hmm, it didn't seem to care much about fastbook, thanks for the help though. I will look at it later [03:46] yes the mplayer plugin works well [03:46] Hello there. I am trying to get NNS and mIRC working with wine. everything worked....now when I try to open up NNS, I only get mIRC, no NNS. I hope someone out there can help me ? [03:46] still it annoys me not to be able to get realplayer to work as a plugin [03:46] anyone knows which directory is scanned for plugins by firefox? [03:46] realplayer not installing is a good thing [03:46] joebodo: why is that? [03:47] Wolfcastle, it's not known for being very good - also usually likes to install spyware type of stuff (at least in windows) [03:47] hmm i see [03:47] Rosey: you don't need mIRC [03:47] ok I'll stick to the mplayer plugin then [03:47] hey [03:47] * DaZ does jedi hand trick [03:48] I have a folder, that i use for including php code into another php script [03:48] i see.... [03:48] DaZ, everytime I restart I get a xOrg error saying my config isn't setup properly. how can I set it up with my nVidia graphics card and not have it boot into low color mode? [03:48] but the code in that folder should never be accessed unless its through another php script ont he server [03:48] aaroninfidel: nvidia-xconfig [03:48] which chmod do i set it too? [03:48] is there some program to manage power consumptions in notebooks in jaunty? [03:49] ie to change cpu speed depending on battery or AC [03:49] DaZ, I just did that and it still wrote me a bad config. could I possibly have the wrong nVidia drivers installed? [03:49] LaireTM, open the console and ping google.com if you receive no answers means that something is wrong with you connection then you must check if you have the proper wlan drivers installed and working properly as well as wlan-manager that you are using to make the connection [03:49] anyone know how to restart sound drivers? [03:50] aaroninfidel: lsmod|grep nvidia;glxinfo|grep direct [03:50] Tehedra: put it below wwwroot [03:50] Tehedra: and it won't matter [03:50] rodiguim: ping: unknown host google.com [03:51] mordof is there no other way then that? I dont really want to change the structure [03:51] Tehedra: php gets run as an extension of apache, which means that it needs the same read access as apache to read your php files. so no matter what if they're located inside your http or www folder or whatever you want to call it, people will be able to view them. easiest way is to put them outside the main folder [03:51] aaroninfidel: and pastebin the logs ;f [03:51] rodigum: it shows me that I am connect to the wlan, and that my system resived an ip adress [03:51] Tehedra: at least i THINK that's how it works. i could be wrong [03:51] okay well thanks if i cant figure out another way [03:51] ill do that, but im pretty reluctant to do that :P [03:51] DaZ, http://pastie.org/655534 [03:52] LaireTM, are you using any wlan-manager to make the connection? [03:52] Tehedra: feel free to let me know (if you want to) if you prove me wrong ^^ i'd like to know also, hehe [03:52] aaroninfidel: how did you install the drivers [03:53] hardware drivers application DaZ [03:53] Is there an option when installing or building a kernel so it doesn't install the recovery kernel? [03:53] or just remove it from the menu.lst? [03:54] that's a bad idea.. lol [03:54] rodifuim: I installed ubuntu and than i had an wlan symbol at the top, i click it and choosed my network, enter the password from my wlan andit connect [03:54] mordof, I'm building a lot of kernels for school and such. [03:54] what firware does banshee support for ipod touch? [03:54] aaroninfidel: cd /usr;find|grep libglx === guilherme is now known as mipz0r [03:55] Sirisian_: imo, it might be a better approach to find a way to password protect it then. removing it altogether could mean the loss of data (if there is any) if you feel it's alright to reinstall at any major problem then it should be fine. i, however, have no idea how to remove it [03:55] DaZ, http://pastie.org/655539 [03:55] anyone can help me with jaunty 64 bit no sound on flash [03:56] Hey guys, just stumbled upon a pretty interesting paper, perhaps it is relevant to some of you guys : http://axiom.anu.edu.au/~okeefe/p2b/power2bash/power2bash.html [03:56] DaZ, brb, I'm gonna restart to see if this worked. [03:56] !wget [03:56] Sorry, I don't know anything about wget [03:57] anyone know how to fix playing videos and audio with ubuntu? im using eeebuntu on a eeePC 1000h [03:57] DaZ, its a 02:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 SE] (rev a1) if that helps [03:57] i got jaunty 64bit running great. All sound(alsa) works but cannot get audio from flash streams on FF. any help on this? [03:58] i can't get any sound at all, shit [03:58] how do i remove bluetooth devices? [03:58] i cant play youtube vids... anyone? [03:59] !flash | mamia [03:59] mamia: To install Flash see https://help.ubuntu.com/community/RestrictedFormats/Flash - See also !Restricted and !Gnash [04:00] !sound | bigtom21485 [04:00] bigtom21485: If you're having problems with sound, first ensure ALSA is selected, by double clicking on the volume control, then File -> Change Device (ALSA Mixer). If that fails, see https://help.ubuntu.com/community/Sound - https://help.ubuntu.com/community/SoundTroubleshooting - http://alsa.opensrc.org/DmixPlugin - For playing audio files, see !Players and !MP3 [04:00] chu: thanks, i'll read that gradually over time === ripps_ is now known as ripps [04:01] Guys, I'm having problem with my mom's computer. Something went haywire and now she does not have eth0 working. It's an unexplained situation for me. Something went wrong with ips, I suppose. [04:01] I am connectet to the wlan but have no connect to the internet [04:01] someone here use pcsx2? [04:02] What is the max supported RAM for Ubuntu 9.04 32bit and 64 bit? [04:02] I have IP address, 192.168.1.104, it is shown on ifconfig and the router. But I'm not able to ping, Google, or any website. Pidgin included. How can I resolve my mom's computer? :( [04:02] 32 bit is limited to 4gb, 64 iirc can support up to 32gb [04:02] !32bit [04:02] Sorry, I don't know anything about 32bit [04:02] !32 bit [04:02] Sorry, I don't know anything about 32 bit [04:04] lubuntu is fast [04:04] hi guys, i downloaded the source from apt-get source, now i like to hide one file and compile the changed code to see the compilation procedure for changed code [04:05] can any one please guide me in compiling? [04:05] ok [04:05] !compile | nic1 [04:05] make [04:05] nic1: Compiling software from source? Read the tips at https://help.ubuntu.com/community/CompilingSoftware (But remember to search for pre-built !packages first) [04:06] i need to do dev work, so i need to compile from source [04:07] nic1: "hide" one file? [04:08] grturner: ty [04:08] np [04:11] how to hide? [04:11] hide? [04:12] Can I run ubuntu under windows? [04:12] just for testing, i moved file.c in package to file1.c [04:12] anyone knows which is the firefox plugin directory? [04:12] Dishtroyer, yes you can [04:12] nic1: won't work. [04:12] DaZ, why [04:12] !wubi [04:12] Wubi is an Ubuntu installer for Windows users that allows you to install and uninstall Ubuntu like a Windows application, in a simple and safe way. http://wubi-installer.org/support.php for troubleshooting. Please file bugs at http://launchpad.net/wubi/+filebug. [04:12] i want to confirm that i wil get compilation errors [04:13] nic1: because functions in the file.c are needed in file.h [04:13] and everything trying to include file.h [04:13] i wil get compilation errors right, i want to try till that stage [04:13] nic1: ./configure;make [04:14] hey [04:14] DaZ: ./configure && make [04:14] what can i split an AVI with? [04:14] hdon: doesn't matter [04:14] imo [04:14] I have Ubuntu installed in its own partition but when I try to mount it it says there are disk errors. If I run Ubuntu under windows will I be able to fix the file errors? [04:14] concretesledge: avidemux [04:15] concretesledge: or avisplit if you don't want a gui... [04:15] possible to install Xp and ubuntu dual Os [04:15] ? [04:16] I have a dual boot system [04:16] sakthivel, sure is [04:16] sakthivel: many people do this. Install windows *first*, then ubuntu... [04:16] how can u explain [04:16] it's not possible [04:16] it's like dividing by zero ;f [04:17] ohh,, but some error message coming [04:17] Daz, You CAN divide by zero. Its called Calculus [04:17] i got a problem, my dad kept getting viruses and malware on windows so i installed ubuntu on his laptop, he loves it, except we cant get it to hook up to an external tv any help? [04:17] DaZ: and the result is vewy, vewy big... [04:18] sakthivel: install windows xp, install wubi(it will install ubuntu/kubuntu/xubuntu), then restart and there you go, you have a dual boot system [04:18] whatever [04:18] you know what i meant ;f [04:18] hi, what does this error mean? /bin/sed -e "s|[@]iconslayoutsdir@|/usr/local/share/awesome/icons/layouts|;s|[@]iconsdir@|/usr/local/share/awesome/icons|" \ [04:18] < ./awesomerc.in > awesomerc [04:18] /bin/bash: awesomerc: Permission denied [04:18] make: *** [awesomerc] Error 1 [04:18] nic1: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [04:19] sorry, sure..forgot about it [04:19] if i installed XP inside my ubuntu,, is it possible to installed all .exe files without any problem? [04:19] sakthivel: sure [04:19] 'inside' ? [04:19] nic1: means you probably don't have permission to write to your present directory [04:19] im looking for a way to boot a cd from grub [04:19] sakthivel: They're operating systems, so you can only run one at a time, unless you use a virtual machine [04:20] so im guessing you guys dont know how? :/ [04:20] sakthivel: thats not possible, a dual book system means you choose which OS ur gonna boot [04:20] prince_jammys, how can i give permissions [04:20] barcode_: It depends on lots of things, such as what video card is in the laptop [04:20] sakthivel, do you have an ubuntu live cd? [04:20] yes [04:20] nic1: is this some kind of installer script? if so, you'd run it as superuser, with sudo. [04:20] yes i have [04:20] mooglinux, what is grub? [04:21] sakthivel, just boot from the live cd [04:21] ok [04:21] nicl grub is a bootloader [04:21] prince_jammys, i am trying to install a package [04:21] barcode_: What kind of graphics chip is in the laptop? Nvidia, ATI/AMD. Intel? [04:21] nic1: did you read https://help.ubuntu.com/community/CompilingSoftware as was suggested? [04:21] prince_jammys, ok sudo works [04:21] its a toshiba satellite, let me check [04:22] sakthivel, when you get to the partitioning part choose install side-by-side, next to your windows OS [04:22] ya but it dint tell that i have to use sudo with ./configure or make === franck_ is now known as franck [04:22] Oh boy... A toshiba satelite.... good luck [04:22] sakthivel, that way you have your choice of windows or ubuntu [04:22] nic1: you don't have to. only when you make install. [04:22] Hey guys, I set up raid and have installed Ubuntu, but it still seems to think the raid devices don't exist. Everything's there and installed - I can chroot in from the liveCD and I've made sure. Problem is on bootup it can't find /dev/md2 (root) or any of the other raid devices. mdadm IS installed and is in rc. [04:22] rwood: ati radeon [04:22] ah crap [04:22] nic1: that's because you don't. Instead, change the permissions so you have write permissions... [04:23] >.< [04:23] barcode_: There should be an ATI tool to do it, but I wouldn't know, since I use nvidia cards myself [04:23] i want to convert AVI to DVD format to play on home theater system.. what is the best/easiest? [04:23] losha: why? [04:23] damn :( [04:23] prince_jammys: what what? [04:23] losha, i am not very clear, i ran both ./configure and make with sudo [04:23] otherwise i am getting errors [04:23] Can someone tell me what the root password is? [04:23] losha: the script is probably trying to write to /etc/foo or /usr/local/foo. his user doesn't need write permission there. [04:23] barcode_: I use nvidia as well, but you should be able to do it. [04:24] which is best......... ubuntu inside XP or XP inside Ubuntu? [04:24] Dishtroyer: i don't think there is a root password, isn't root disabled in ubuntu? [04:24] any recs for a quiet, cheap, ubuntu machine that can handle >= 8GB memory? [04:24] davebs: correct [04:24] hmm , i cant seem to get it working [04:24] Dishtroyer: unly ubuntu developers know it [04:24] sakthivel: You can generally only run ONE operating system at a time [04:24] so they can spy on you [04:25] nic1: if you get the sources via sudo apt-get, they will be owned by root, and not writable by you. Just do chown -R . ; chmod -R u+w . Then you won't need to be root to compile/edit... [04:25] DaZ: please stop [04:25] s/un/on/ [04:25] !root | Dishtroyer [04:25] Dishtroyer: Do not try to guess the root password, that is impossible. Instead, realise the truth... there is no root password. Then you will see that it is 'sudo' that grants you access and not the root password. Look at https://help.ubuntu.com/community/RootSudo [04:25] sakthivel: If you want to choose at boot though, you are better off installing windows first, then ubuntu by using the wubi tool. [04:25] When I try to boot ubuntu, it tells me there are file errors and runs an automatic fsck. But then it fails and says I need to run it manually and asks me to either provide a root password or press cntrl-D [04:25] but ubuntu inside xp .. we can use both same time? [04:25] tritium: this is the way i protect my consciousness from stupid questions [04:25] >: [04:25] sakthivel, have you ever thought about making the switch to ubuntu only? [04:25] DaZ: it's not appropriate here. [04:25] sakthivel: You cannot use both at the same time unless you use software such as vmware to create a virtual machine. [04:26] yaa wine software ? [04:26] losha, i gave chown -R i get the error chown: missing operand after 'user name' [04:26] nic1: directory? [04:26] sakthivel: That's different, it emulates the win32 api, with a rather random chance of success for any given application [04:27] wine won't let you run just any windows application [04:27] nic1: that's because it is chown -R . <--- see the 'dot' here? It is part of the command [04:27] You're better off figuring out what linux application you should use instead [04:27] i'm a bit stuck on an issue: ubuntu install off usb goes to this swirly pulse of random colors right after the loading screen (on another monitor it just goes to black), the framebuffer=false option doesn't help, and I successfully booted off of a backtrack live usb drive i had around (which is kubuntu and uses framebuffer)... doesn't seem to be much online about this other than disable fbuffer? [04:27] dot is the local directory [04:27] <: [04:27] DaZ: when I find myself making fun of the newbies, it means it's time to take a break... [04:27] now i have installed ubuntu in my PC. i want to install Xp also ..but i dont want wine software.. ist it possible to install seoartely// [04:27] losha, it tells operation not permitted [04:27] DVD styler [04:28] what are 3 important modules you guys normally compile into a kernel. I have an assignment to select 3 "important" ones. I'm in the interactive menu looking around and I'm not sure what "important" thing would be. [04:28] nic1: sorry, sudo chown -R . [04:28] barcode_: this might help. Sometimes the MythTv guys have the best info. http://www.mythtv.org/wiki/ATI_Proprietary_Driver [04:28] dfeere [04:28] Sirisian_: drivers. [04:28] Sirisian_: Perhaps try the #ubuntu-offtopic channel instead. This channel is solely for support. [04:28] does anyone know how to still have a terminal open when you stop your gdm. [04:28] losha, working [04:28] MenZa, ah thanks [04:28] lam sao co the nghe nhac tren ubuntu [04:28] Sirisian_, one i know is graphics drivers [04:29] If I press CNTRL-D it reboots [04:29] Sirisian_: are we doing your homework assignment? [04:29] barcode_: are you using the ubuntu-packaged drivers? (not a download from nvidia.com) [04:29] ethernet drivers [04:29] So I need the root password [04:29] Dishtroyer: see what you were told above [04:29] Dishtroyer: please PM me... [04:30] losha, I'm in the off-topic channel. Actually no. I could just choose 3 random ones, but I was just curious mostly. [04:30] Dishtroyer: you can set it using passwd [04:31] Dishtroyer: use sudo instead. You don't need to set a root passwd. [04:31] my desktop configuration is intel original motherboard 946gzis with p43.2 gz processor. A bttv tuner card of 'kworld' which is connected to my motherboard's sound input with a external jack from its sound output. If I try to play tv through it on any linux distro including ubuntu I have to go to console and type rmmod bttv first and then modprobe bttv card=78 tuner=68 radio=1. After that if I open the tvtime or xawtv I can watch the vidios of channels without a [04:31] How do I use SUDO? [04:31] Dishtroyer, did you run the fsck manually as it suggested - [04:31] Dishtroyer, that is normally what you do to fix the file system [04:31] I CANT RUN IT MANUALLY WITHOUT THE PASSWORD [04:32] !caps [04:32] PLEASE DON'T SHOUT! We can read lowercase too. === Sirisian_ is now known as Sirisian [04:32] Dishtroyer: you've been told that there is no root password [04:32] !root | Dishtroyer (again -- pay attention, please) [04:32] Dishtroyer (again -- pay attention, please): Do not try to guess the root password, that is impossible. Instead, realise the truth... there is no root password. Then you will see that it is 'sudo' that grants you access and not the root password. Look at https://help.ubuntu.com/community/RootSudo [04:32] So what do I type when it asks me for one? [04:32] * ChesFTC_ sighs [04:32] Dishtroyer: your own password [04:33] * DaZ thinks you're wrong. [04:33] maco: He's hanging on a fsck at boot [04:33] You're wrong [04:33] Dishtroyer, did you create one on install? [04:33] maco: I don't remmeber it, even if I had one [04:33] I probably did but I don't remember it [04:33] Dishtroyer: boot from cd, chroot, set root password and live a happy life [04:33] Dishtroyer: Hit Ctrl-d, login and set a root password, reboot and enter it, then type fsck -y / to manually do the fsck [04:34] ChesFTC_: wait what? i was answering "what password do i use for sudo?" [04:34] DaZ: please dont' recommend setting a root password [04:34] ChesFTC_: doesn't like reboot after it? [04:34] maco: He's got a fsck failing on boot [04:34] tritium: i will [04:34] hmm [04:34] ***need to learn more about chroot [04:34] Ches, CNTRL-D just reboots! [04:34] ChesFTC_: so why's he asking about sudo? [04:34] DaZ: no, please do not. [04:34] Dishtroyer: Dunno [04:34] sorry [04:34] maco: Dunno why [04:34] tritium: then fix it without a password [04:34] Dishtroyer: You should boot off a livecd then [04:34] And fsck your hdd from there [04:34] AND? [04:35] Afer you fsck it, then it should boot normally [04:35] The live CD must be messed up because I can't get to a command prompt [04:35] How do you get modules to autoload at boot in Ubuntu? [04:35] !password | Dishtroyer : for a way [04:35] Dishtroyer : for a way: Forgot your password? See https://help.ubuntu.com/community/LostPassword What's the root password? See !sudo. Don't see *** in password prompts? That's normal. Sudo doesn't ask for your password? It remembers you for several minutes. Please use strong passwords, see https://help.ubuntu.com/community/StrongPasswords [04:36] So ; i was just hanging out ; and got a kernel panic shutdown error [04:36] where can i find that? [04:36] Kuprin: put it in /etc/modules [04:36] Kuprin: list them in /etc/modules [04:36] Dishtroyer: the first url, for how to do it from recovery mode. [04:36] Ok will try that. Thank you [04:37] Dishtroyer: if you have an fsck failure on boot, and you didn't set a root password when you had the chance (i.e. when the system was booting ok) then you have to boot a live cd and fsck from there. I don't think you have any other option... [04:37] blaaaarg, perhaps /var/log/syslog (if it was logged at all) [04:37] ubuntu design is awesome [04:37] ChesFTC_: FYI TestDisk worked like a champ. I hope. I'm going to try to reboot now and see what happens. [04:37] rwood: Excellent, thanks for letting me know [04:37] no prob [04:38] got nvidia driver issues with VALIDATION ERROR: Data incomplete in file /etc/X11/xorg.conf .. can anyone help [04:38] Ubuntu-Noob, which ubuntu version? [04:38] 9.04 [04:38] ok [04:38] maco, tritium: what I thought. Now I need to get the bloody livecd to stop treating it as read-only [04:39] Kuprin: wipe off any blood from the CD before putting in the drive tray. [04:39] Ubuntu-Noob, did you upgrade your nvidia driver ? [04:39] Ubuntu-Noob, you trying to save your resolution? [04:39] dangit [04:39] ok in windows i get an irql error ; not greater then or lessthen [04:39] so i installed ubuntu ; now i get that [04:39] what the heck [04:39] yes i tryed to upgrade driver to 185 [04:39] tritium: haha [04:39] Ubuntu-Noob: 185 is not in the repositories [04:40] Ubuntu-Noob, that was an error that we had in early 9.10 alphas [04:40] Ubuntu-Noob, 180 is recommended, i use the 185 driver in 9.10 [04:40] i tryed manual from nvidia site [04:40] worin driver [04:40] wrong [04:40] Ubuntu-Noob: don't do that. Use ubuntu packages. [04:40] tritium: I don't mean on the livecd filesystem, I mean on the hd I'm chrooted onto :P [04:40] Ubuntu-Noob, system-administration-hardware drivers [04:40] Kuprin: I know ;) [04:41] well i know better now not to *not use packages" [04:41] and choose the recommended driver [04:41] joebodo, your right i had something similiar to that [04:41] anyone familiar with dell sound drivers and ubuntu 9.04 please help me [04:42] at this point im just trying to get back to drivers 180 [04:42] joebodo, would not save to X configuration as root in nvidia-settings [04:42] how can i get weather, perhaps some system information on my desktop? gdesklets doesn't work :( [04:42] thiebaude, yes - exactly [04:42] hi [04:42] Ubuntu-Noob, goto hardware drivers [04:42] DeadmanIncJS: screenlets? :f [04:43] im at hardware drivers [04:43] DaZ... yes [04:43] so gdesklets or screenlets [04:43] or everything doesn't work? :f [04:43] joebodo, it still wont save, but i fixed by burning and installing the 9.10 alternate daily cd [04:43] oh sorry... i tried gdesklets [04:43] didnt work [04:43] do i just type in "screenlets"? [04:43] DeadmanIncJS: now screenlets are cool [04:44] imo yes [04:44] thiebaude, i think it was fixed at some point, but i used my xorg.conf from my 9.04 install [04:44] im on a fresh install here, and loving it [04:45] i shall d/l and give this a try [04:45] thanks DaZ [04:45] thiebaude, yes - very fast - and some good improvements [04:45] thiebaude any advice besides got hardware drivers ? [04:45] ? [04:45] Hi guys... I need help here, I just installed ubuntu but when I start it I just got a black screen... is somebody has a idea about what is going on ? [04:45] Ubuntu-Noob, there's like a 1000 post thread on nvidia drivers on the ubuntu forms [04:45] *forums* [04:45] im very much looking fwd to 9.10 :) [04:45] even though im a linux nOOb lol [04:46] o/ [04:46] \o === Zeca is now known as FeijoH [04:46] Ubuntu-Noob, just let search for the drivers and pick the recommended one install it and gksudo nvidia-settings and set your resolution and restart [04:46] whew [04:46] ubuntu [04:46] !nvidia [04:46] For Ati/NVidia/Matrox video cards, see https://help.ubuntu.com/community/BinaryDriverHowto [04:46] Hi, I have created a jaunty live usb... I am having some problems creating an encrypted folder. I used ecryptfs. But whatever I moved to my Private fodler I could not open anymore (text fioles appeared as empty). I am now trying to remove them. I followed the instructions, umounted it, changed permission to 700, but when I try to rm it, my terminal just hangs [04:47] AshCatium [04:47] dae baitola [04:47] Does ubuntu NEED raid1 modprobed on boot to use a raid partition as /? I keep getting a root not found error, but I do get the splash screen. [04:47] FeijoH [04:47] Sehrus there can be problem with ur graphic card or memory [04:47] Ubuntu-Noob, which nvidia card do you have? [04:47] 8800 gtx [04:48] Ubuntu-Noob, i have 8400 gs w/512 mb video ram [04:48] Sehrus, try hitting control-alt-F1 and see if it shows any errors [04:48] thx joebodo, ill try it [04:49] how do i search under hardware drivers ? [04:49] hey guys, php5-mysql client is breaking my apache server (PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20060613+lfs/mysql.so' - /usr/lib/php5/20060613+lfs/mysql.so: cannot open shared object file: No such file or directory in Unknown on line 0) [04:49] Ubuntu-Noob: You don't. If it finds something your system needs, it'll tell you. [04:49] anyone? [04:49] anyone know anywhere else i can get this package from? sort of compiling php [04:49] teste fala [04:49] cara [04:49] renan ? [04:50] Help. I am moving my /home to a new partition, but something is wrong and i get permission denied for everything it tries to copy (even IF i include sudo) [04:50] How can I clone a partition from my laptop to an external drive connected over USB? [04:50] !es | AshCatium [04:50] AshCatium: En la mayoría de canales Ubuntu se comunica en inglés. Para ayuda en Español, por favor entre en los canales #ubuntu-es o #kubuntu-es. [04:50] PCTeacher012, if things are being used, they'll be read only [04:50] jimlovell777: I've no idea how to do it exactly, but you want dd - try 'man dd' [04:50] you'll have to log in as another use [04:50] ubottu it isnt spanish it´s portuguese [04:50] Error: I am only a bot, please don't think I'm intelligent :) [04:51] i take it that it only tells you something if you never did something there before [04:51] !pt [04:51] Por favor, use #ubuntu-br para ajuda em português. Para a comunidade local portuguêsa, #ubuntu-pt. Obrigado. [04:51] mark[oz]: They are not being used. I am on the live CD. [04:51] ubottu a ta entendi o idioma legal cara hehehehe [04:51] Error: I am only a bot, please don't think I'm intelligent :) [04:51] MenZa: Do I have to create a partition on the external drive exactly the size of the partition to be cloned or would dd make it by process of what it does? [04:52] So how do i actually do it now? [04:52] jimlovell777: I'm *pretty* sure dd copies everything completely verbatim. But I've never used it myself. [04:52] MenZa: Ok thanks. [04:52] joebodo - I did not get any error [04:52] I can log in as get to the "command" area [04:53] Sehrus, that's good - just seems to be a video driver issue i guess [04:53] how can I fix it if I cant get into ubuntu... ? [04:54] jimlovell777: do you really need a bit-by-bit clone? copying all the data (without copying the blank spaces) with rsync would take less time [04:54] How do i copy a folder in terminal? [04:54] joebodo - its a black screen but I have the white arrow... but nothing else [04:54] PCTeacher012: cp [04:54] can jockey use the command line to setup restricted drivers ? [04:54] cp -r ! [04:54] PCTeacher012: cp -R will copy a folder, its contents, and any subfolders. [04:55] FeijoH [04:55] maco: Yes I really need a bit-by-bit clone, the partition is a truecrypt created partition and every lit bit matters, pun intended. [04:55] jimlovell777: ah ok [04:55] MenZa: Thank you [04:55] PCTeacher012: Welcome :) [04:55] maco: Thanks for the suggestion though. [04:56] How does Moovida draw to a window? OpenGL? I want to create an application with a similar UI [04:57] Sehrus, tell the room your problem again - i dont know what you need to do to resolve the issue [04:57] I wrote a new application to automate the setup and configuration of blackberry devices and am looking for someone with a blackberry to test this. Any free/open source software advocates in here interested? [04:57] ryguy: check the source code ;f [04:58] Can I change which hard disk will grub install to if I use the alternate CD? [04:58] DaZ: I have been, cant find anything [04:59] theDtTB2`MB I don't think you need to use the alternate CD to do that... but you should be able to do it with the alternative CD if you so desire. i'm not sure how though. [05:02] I only have the alternate CD and I'm using the lab's computer. I worry that it will replace the Windows MBR. [05:02] how come sudo command cant copy my /home? [05:02] got these problems .. pasted them here http://dpaste.com/107451/ [05:03] permission denied? [05:03] theDtTvB2`MB then you don't want to install the MBR. [05:03] theDtTvB2`MB I mean- grub. [05:04] acad: Well I want but on the other hard disk. [05:04] I used partition manager to create a 29G ext3 partition.. but thats not reflected under df -h .. how do i set the mount point? [05:05] theDtTvB2`MB not really sure. [05:06] wrapster, did you format it ? [05:07] Anybody here using XFCE knows the best package to install to get same as xubuntu-desktop without package 'xubuntu-desktop'? [05:07] leaf-sheep: You mean, the individual packages? [05:08] leaf-sheep: http://packages.ubuntu.com/jaunty/xubuntu-desktop [05:08] Does anyone have any tips on triple booting windows linux and mac? [05:08] MenZa: To get the minimal Ubuntu XFCE theme and essential packages without the "bundled" softwares. [05:08] !dualboot | brianherman [05:08] brianherman: Dual boot instructions: x86/AMD64: https://help.ubuntu.com/community/WindowsDualBootHowTo - MACs: https://help.ubuntu.com/community/MacBookPro https://help.ubuntu.com/community/YabootConfigurationForMacintoshPowerPCsDualBoot [05:08] leaf-sheep: see above. should make it pretty obvious which ones to get. [05:09] MenZa: Alrigh. :) [05:10] Hello, i have a problem with an access to the Internet. I am connect to my wlan, but cant ping or reach an Internetpage [05:10] hi! I need a program for ubuntu to create a boot of windows xp in my Usb flash disk please [05:12] I have 2 network cards in this ubuntu computer, one connected to a switch and one to the modem, how do I get internet [05:12] on the other computers [05:12] in firestarter it says, eth0 not ready [05:15] joebodo: yeah i've formated it. [05:15] how do i get rid of grub? [05:16] nowimproved, are you intentionally trying to use yoru computer as a router?> [05:17] i have a minimum install.. have rhythmbox and all the gstreamer plugins, but audio CD's don't play.. what else do i need? [05:17] scott_ino2, yes [05:18] nowimproved, i mean, there are a Ton of guides out there for this, was there something in particular you were having trouble with [05:19] https://help.ubuntu.com/community/Router [05:19] just keep getting this error in firestarter Internal network device eth0 is not ready. Aborting.. [05:19] Do i have to say Ubuntu wich networkcard it have to use for the internet connection? [05:23] Hello, I have a small problem I am using grub2 as my default boot loader, problem is I am never presented a boot menu to boot into another os it just goes on right ahead straight into windows. I've tried hitting esc or enter before but that did nothing, any ideas? [05:23] not windows, ubuntu* [05:24] !karmic | tsoporan_ [05:24] tsoporan_: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [05:24] I liked it better when it said s/MAY/will/ [05:25] Heya, any of you know of a bittorrent client daemon in the repositories that monitors a queue directory looking for .torrent files and automatically starts downloading them when found? I'm looking for something similar to hellanzb or sabnzbd+ for torrents. === what__ is now known as whatis [05:25] damn [05:25] rtorrent, milesc2 [05:25] just cant win.... [05:25] great, thanks digi === whatis is now known as whatis6x9 [05:28] For ClamAV - What's the terminal command for it? I'm trying to run "man clamav" so I can read the manual yet its saying no entry, yet I have it installed. [05:28] Roasted: man clamscan [05:29] bingo! hey, clamav is terminal only, right? [05:29] Roasted: The apropos command is what you want next time [05:29] on the lighter side: What is the difference between Bird Flu and Swine Flu? [05:29] For bird flu you need tweetment, [05:29] and for swine flu you need oinkment [05:29] Roasted: there are graphical frontends available, I think [05:29] oink is gone [05:29] Roasted: "apropos clam" will show you the man pages containing clam in the name [05:29] RIP [05:29] ChesFTC_: if only I could remember how to spell apropos [05:30] DigitalKiwi: heh, ain't it true [05:31] what are some linux virus scanners that have a gui? [05:31] linux virus scanners? [05:31] Roasted: clamav [05:31] milesc2 - yes. I have an infected flash drive with conficker on it that I use on windows machines at work. [05:31] milesc2 - I'm trying to scan it at home on an Ubuntu machine where I know it won't spread like wildfire. [05:32] avast [05:32] Roasted: Use clamav. I'm sure that there are some GTK+ frontends. [05:32] https://help.ubuntu.com/community/Antivirus [05:32] avscan and clamtk... I think [05:32] I was just about to ask, I'm running clamav right now from terminal but I was curious to see its GUI... does anybody know? [05:32] Roasted: why would you need a virus scanner? gnu/linux is virus free. there are like 20 viruses ever created and never any real viruses iin the wild- except on out-of-date linux boxes back in the day. [05:32] acad - read above :) [05:32] AVG has gui [05:32] Roasted: try clamtk. A windows-based virus scanner is better for finding windows viruses. clamav is mainly used to check for email viruses on mail servers [05:33] clamav can scan Windows viruses too maybe because it also runs on Windows. [05:33] that's what I was thi nking [05:33] linux AVG uses the same definitions as the windows version [05:33] it being mac/win/nix I figured it'd have a solid shot at finding it. [05:33] i'd imagine Panda does too [05:33] Roasted: but it might be able to detect conficker [05:33] no kidding, milesc2? [05:34] aye [05:35] I installed clamtk. Where the flip is it in the menu? [05:35] Roasted: it might be under system tools [05:35] Roasted: or accessories [05:35] no dice. [05:36] r@115.173.3.53) Quit ("ERC Version 5.3 (IRC client for Emacs)") [05:36] lol, really? [05:36] emacs can do everything :( [05:36] we had a recall on all of our emac system boards at my last job [05:36] 'Lo folks, I've got a common question: What packages does an ubuntu (not Kubuntu) user need to make Amarok play MP3's? ubuntu-restricted-extras didn't do it. [05:36] keaton - medibuntu repository [05:37] http://www.medibuntu.org/ [05:37] !sbminst [05:37] Sorry, I don't know anything about sbminst [05:37] hey ubu guys, for some reason bootup hangs doing a fsck, it won't tell me on WHAT, it already fsck'd /, so the only things it could fsck are almost empty. [05:37] Can someone tell me whats an sbminst package? [05:37] I'm really not sure what's going on. [05:37] I just upgraded to 9.10. Can anybody help with ibus and Japanese or Chinese input? [05:38] ima noob and need a good webcam prog for a creative webcam-i currently use "cheese" on ubuntu 9.04 and the pic is always fuzzy [05:38] I've got the medibuntu repository, but what packages am I supposed to install? [05:38] keaton - whichever ones apply to you. Are you running Ubuntu 9. 04? Then install that accordingly. Are you running 32 bit or 64 bit? Install the 32 or 64wcodecs accordingly, etc [05:38] goodmami, ask the same question in #ubuntu+1 for any 9.10 support questions [05:38] ok thanks ZykoticK9 [05:39] whats sbminst? [05:39] LinuX2half, "smart boot manager" <- no idea what it is though [05:39] when editing my gconf for my panel clock, in custom i know it's %b for example for the month, but what is it to show the temperature? [05:40] HAve connection to my W-lan Router but no connection to the internet. Some suggestions? [05:40] good Morning to all [05:41] quit [05:41] So I just installed AVG for linux and once again Ic ant flipping find it in the menu. [05:41] * DigitalKiwi gives ryan_ a / [05:42] Is there some sort of command I can run to see WHERE the damn programs go when I install them? [05:43] Any one if you know pls answer, My advance thx to you. Can I install Microsoft Encarta in ubuntu === YDdraigGoch is now known as Richie [05:43] hello. alternate installer showd only sda , no partitions. this happened after this: were c: and d:, in windows installer i deleted c: and creted new partititon, now i think may be i can install not deleting c:, just selecting it and may be i could format it before install. when created new partition instead of c: it created 8 mb small space at start. then i created 2 partitions at end for linux with partitioner in windows. but ubuntu 9.04 64 bit has not see [05:43] n partitions. same has happened with ub 8.04 or 8.10 32 bit but it started to recognise partitions in 9.04. [05:43] Mm [05:43] does dpkg have a comand to show what files are owned by a package? [05:44] DigitalKiwi: dpkg -L packagename [05:45] How to install Microsoft Encarta in Ubuntu [05:45] so dpkg -L packagename | grep /usr/bin [05:45] should work? [05:45] DigitalKiwi: dpkg -L packagename | grep bin/ [05:45] I'd do it but I don't have dpkg ;p === kiran is now known as Guest57409 [05:47] any good webcam progsw other than cheese webcam booth [05:47] When I install "ARTHA" disctionary in ubuntu by using dpkg it always shows re-installed error, but is works fine. Why this ? [05:48] How do I launch AVG in Ubuntu? [05:48] When I installed "ARTHA" disctionary in ubuntu by using dpkg it always shows re-installed error, but its works fine. Why this ? [05:48] Ah! You highlight me :\ [05:48] Roasted: You probably don't need AVG in Ubuntu [05:48] !virus | Roasted [05:48] Roasted: A/V software is available, however read this to understand why Linux does not have a virus problem: http://librenix.com/?inode=21 [05:48] DigitalKiwi: if it works, then you can probably ignore it [05:48] sebsebseb: he does [05:48] anyone here knows whats an sbm package and what it can do? [05:48] honestly, I just want to know how, thanks [05:49] DigitalKiwi: oops, wrong person [05:49] Roasted: AVG the anti-virus software? [05:49] yes [05:49] Damal: if it works, you can probably ignore that message [05:49] it is error ERROR [05:49] sebsebseb: he has a flash drive with conflickr or whatever the blasted spelling is [05:49] sebsebseb - I have an infected flash drive with conficker on it and I'm trying to zap it from my Ubuntu machine. I use this flash drive at work (windows network) [05:49] dd will get rid of it =D [05:49] Damal: for safety reasons, you should usually remove a package before installing it again [05:49] Anyone...? [05:50] I just installed XP on a brand new computer and used my flash drive to transfer the network driver, and just like that I have the virus. I ran McAfee's "Stinger" on it which found it but failedt o get rid of it (POS) [05:50] quick question, if "%b = Month" and "%d = Date" then0 "%? = Temperature" ?? [05:50] ok lstarrnes [05:50] !sbm [05:50] Sorry, I don't know anything about sbm [05:50] !boot [05:50] Boot options: https://help.ubuntu.com/community/BootOptions - To add/remove startup services, you can use the package 'bum', or update-rc.d - To add your own startup scripts, use /etc/rc.local - See also !grub and !dualboot - Making a boot floppy: https://help.ubuntu.com/community/GrubHowto/BootFloppy - Also see https://help.ubuntu.com/community/SmartBootManagerHowto [05:50] how do you change ur nickname? [05:50] Guys, when I install applications, is there any way to figure out where they go? I'm sick of installing new apps and they go all over my system without me knowing where. [05:50] /nick newnick [05:51] thanks [05:51] DigitalKiwi: yeah I just scrolled up [05:51] whats an smbinst package...? [05:51] DigitalKiwi: well searched for his name === mitchell is now known as PYRO_ [05:51] go to home, and then unhide you files with control + h, that's where most go [05:51] Roasted: check /bin and /usr/bin [05:51] Roasted: Can't you just remove whatever is on it and start over? [05:51] No one here knows whats an sbm package....? [05:51] sebsebseb - No. I cant. [05:52] sebsebseb - I have a ton of stuff on there from work. I recently put a lot of new stuff on it and haven't updated my backup. (I rsync my flash drive contents to my ubuntu machine for redundancy) [05:52] Roasted: I am not sure if any of the Linux tools can remove Conflicter, but I think there's something for Windows that can [05:52] LinuX2half: where did you hear the term "sbm package"? [05:52] can anyone point me to a good 'install ubuntu on mac' tutorial? [05:52] or the iso [05:52] sebsebseb - yeah, but every time I plug it in to a windows machine, it gets instantly infected. [05:52] does confickr infect files? like is anything he has on that flash drive actually safe anymore? [05:52] Roasted: it won't infect your Ubuntu install though, since it's a Windows virus [05:52] lstarnes: from the terminal [05:52] sebsebseb - I know. That's why I'm trying to scan it from within Ubuntu. [05:52] LinuX2half: where, exactly? [05:53] LinuX2half: what command gave you that? [05:53] Roasted: you can probably copy the files to your Ubuntu install, and then remove everything on the USB stick [05:53] sbm---possibly smart boot manager? [05:53] sebsebseb - and then copy the files back and restore the virus. Right? [05:53] i'm a bit stuck on an issue: ubuntu install off usb goes to this swirly pulse of random colors right after the loading screen (on another monitor it just goes to black), the framebuffer=false option doesn't help, and I successfully booted off of a backtrack live usb drive i had around (which is kubuntu and uses framebuffer)... then i downloaded alternate install, no luck [05:53] lstames: type in smbinst --help [05:53] Does anybody know how to use AVG on Ubuntu? [05:53] LinuX2half: smbinst or sbminst? [05:53] Roasted: maybe, but probably not, I mean if the files open up ok in Ubuntu, then they are probably ok [05:53] lstames: smbinst [05:54] sebsebseb - the files open fine, but conficker itself is a file soemwhere on my fl ash drive. [05:54] I just really need to figure out HOW to scan instead of WHY to scan. [05:54] LinuX2half: I don't have that command (also, my nick has r and n, not m) [05:54] Roasted: right, well you copy/move the files that you know about, the ones that are your data, and then format the drive [05:55] again, I'd like to know how to scan. I'm sorry to be an ass but I just want to figure this out while actively scanning the drive. [05:55] Roasted: dpkg -L avg(or whatever the pkgname on ubuntu is) | grep bin [05:55] lstanrnes: opps, its sbminst --help [05:55] Roasted: also maybe you should start using a new Flash drive at work [05:55] then you know where the binary is and can run it [05:55] how do I go to system-administration-networking in jaunty? [05:55] My flash drive is fine. [05:55] some guide tells me to to do that, but I don't see it [05:55] LinuX2half: I don't have that either [05:55] maybe that was for an older ubuntu [05:55] DigitalKiwi - dpkg is what installs it - correct? I already have it installed. [05:56] my stupid atheros wireless card won't connect with wpa [05:56] Roasted: it also shows info about packages, like installation locations [05:56] i smoke im 15 [05:56] Roasted: and if you got it from your job in the first place, they should sort out their computer security [05:56] -L is a flag that lists the files owned by that package [05:56] sebsebseb - that's what we're actively working on, but when you have 4 people for 1,500 computers, youc an only go so fast. [05:56] do any one here uses Listen Media player ??? whay its not the default for ubuntu ??? [05:56] do any one here uses Listen Media player ??? whay its not the default for ubuntu ??? [05:57] does any body here live in memphis [05:57] sebsebseb - we have a network sniffer in place which actually pinpointed the exact computers that are infected, but I only got word of this around 7pm and I left at 6pm. [05:57] Hi everyone. I have a noob question... The system->administration->networking item is missing in my just-installed Ubuntu 9.04... I can't find the network settings anywhere =/ [05:57] Roasted: Have you tried clamav? It's linux native so might be easier [05:57] hello good morning [05:57] lstarnes - It says AVG is not installed, when clearly synaptic says it is installed. [05:57] and, the question is: where can I find that configuration interface? [05:57] Roasted: lowercase? [05:57] jordan_U - Yeah, I have. I'm just t rying to find something with a GUI though, and the clamtk gui kind of sucks. [05:58] nelovishk: It's in System > Preferences now because it doesn't require root priveleges [05:58] Roasted: I see that's your job ok, maybe also in the future some Desktop Linux can be used there, so that problems like this probably don't happen [05:58] Roasted: what about avast? [05:58] my ubuntu local apt-mirror not updating from archive === Edgan_ is now known as Edgan [05:58] anybody has experience with oracle here? [05:58] nobody knows where to get network config stuff in jaunty? [05:58] sebsebseb - When you have educational software that a truckload of money was spent on when it's Windows based, it's very hard to convince a board of old timers that an operating system less popular than Windows is the way to go. [05:58] Downloading 48 index files using 10 threads... [05:58] Begin time: Thu Oct 15 10:22:55 2009 [05:58] [10]... [05:59] it is stuck with the following status [05:59] roasted use pentesting to find weakens on the computers on your network [05:59] Jordan_U: I can't find it under Preferences either... Just network connections and network proxy... [05:59] Downloading 48 index files using 10 threads... [05:59] Begin time: Thu Oct 15 10:22:55 2009 [05:59] [10]... [05:59] chin: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [05:59] lstarnes - It doesnt find it, lowercase or uppercase [05:59] and i forgot what i was gonna say next [05:59] hold on [05:59] nelovishk: Network Connections is the new tool ( network manager ) [06:00] any body have answer [06:00] Roasted: it's a nasty one by things I read before, I think you might have to format anything that is infected by it, to make sure it is completly gone, plus I think there is a tool for WIndows to remove it [06:00] lstarnes - its avg85flx... according to synaptic. It found it, but I have no idea wh ere the icon is to LAUNCH the program [06:00] apt-mirror local not updating [06:00] sebsebseb - Yeah, we already have a list of the infected computers, whcih total count is about two dozen out of the 1,500 sy stems we have on the network. [06:00] Jordan_U: hm! then, I guess I'll try to find how to change the hostname there =) [06:00] Jordan_U: thank you very much [06:00] sebsebseb - We have tools to remove it at work. It's just we didn't know where to start before. Now we know. [06:01] Roasted: have you checked in accessories and system tools? [06:01] Roasted: sometimes programs don't just add them selves to the menu when you install them into Ubuntu [06:01] nelovishk: np [06:01] Roasted: you can launch it from command line [06:01] lstarnes - yes. [06:01] yes [06:01] sebsebseb - Unfortunately, I know. Quite stupid, but something I've tolerated since I've been on Ubuntu. [06:01] when i have a virus on my computers i use a linux boot disk to scan my computers [06:01] DigitalWiki - that'd be nice if I knew the command. :) [06:01] trk is a good one [06:01] !info avg [06:01] Downloading 48 index files using 1 threads... [06:01] Package avg does not exist in jaunty [06:01] Roasted: you may want to read https://help.ubuntu.com/community/Antivirus/Avg [06:01] Begin time: Thu Oct 15 10:36:48 2009 [06:01] [1]... [06:01] Begin time: Thu Oct 15 10:36:48 2009 [06:02] it is not proceeding further [06:02] ubottu: you don't like me? :( [06:02] Error: I am only a bot, please don't think I'm intelligent :) [06:02] Roasted: re installing the program, or logging out of Ubuntu usaully takes care of, apparantly you already know, plus you could launch it using the name on the command line, as I expect again you already knokw === idiot is now known as Guest36056 [06:02] oh i missed his reply >.> [06:02] and once again, considerable tweaking to be done to edit an installed program. Be nice if it did this automatically. Hate to be an ass but, seriously? [06:02] error with apt-mirror [06:02] Roasted: that is an issue with avg's own packaging [06:02] pls help me [06:02] Errr.. [06:02] lstarnes - still an issue, whether its ubuntu or avg. [06:02] its something I see a lot [06:03] Roasted: dpkg -L package -- lists files owned by that package, you can find the file in /bin that way, and run that [06:03] Hi Wizards! this is the first time i'm on this channel! [06:03] can someone tell me how to lower screen brightness from the terminal??? [06:03] Roasted: so complain to avg [06:03] can u help me [06:03] vox - and every other application Ive installed that did the same shit? I'll consider it. Thanks. [06:03] sudo avggui [06:03] OMG BAD WORD [06:03] that should open avg gui [06:04] gksudo not sudo [06:04] sudo: avggui: command not found [06:04] !gksudo [06:04] If you need to run graphical applications as root, use « gksudo », as it will set up the environment more appropriately. Never just use "sudo"! (See http://psychocats.net/ubuntu/graphicalsudo to know why) [06:04] hmm odd /dev/sda1 is showing 97% full. Is there a quick way to list the largest folders on the disk? [06:04] running 9.04, jaunty, amd phenom 2 (64bit). not quite sure what sets it off, but X hangs/crashes on me, forcing me to reboot as it does not accept any keyboard/mouse input. dmesg has the following line in it: "[46473.595156] compiz.real[3723]: segfault at 40 ip 00007f7ba36f24e0 sp 00007fffaeed4588 error 6 in libGLcore.so.180.44[7f7ba2e93000+da2000]" any ideas? [06:04] nelovishk: I don't think that you can change the hostname through network-manager, and I'm not sure if there is a GUI replacement installed by default. You can either install "network-admin" or just... [06:04] Roasted: sounds like your a school tech, I just want to say loads of great educational software for Linux, by the way I hope you already know about that, plus about Edubuntu [06:04] !hostname | nelovishk [06:04] nelovishk: Use hostname to set the hostname, or to do it permanently: edit /etc/hostname and /etc/hosts . WARNING! Make sure that your current hostname and /etc/hosts match, otherwise sudo may not work properly. Alternatively, use the gui at System > Administration > Networking on the "General" tab [06:04] can someone tell me how to lower screen brightness from the terminal??? [06:04] http://www.ducea.com/2006/05/14/tip-how-to-sort-folders-by-size-with-one-command-line-in-linux/ Sirisian [06:05] Guest36056: what videocard/driver? [06:05] sebsebseb - yeah, but unfortunately, we JUST dumped a truckload on educational software right around the time I started, so I cant imagine justifying to the board that me, the new guy (been there a year, but Im the youngest in the department) that we should switch over due to platform changes. [06:05] Hi All! im having a speed limitation while using usbserial module with my HSPA modem. is there any alternatives to use instead usbserial? [06:05] vox, howto check? [06:05] sebsebseb - it really comes down to bad timing, and right now it's just an awful time for me cause I cant really push that card, ya know? [06:05] Guest36056: lspci |grep vga [06:05] anyone know a good webcam prog ? other than cheese webcam booth [06:06] Roasted: yeah [06:06] Sirisian: go to where /dev/sda1 is mounted, and run sudo du -x | sort -rn > /tmp/du.out It'll take a few minutes to run... [06:06] lspci | grep -i vga: 02:00.0 VGA compatible controller: nVidia Corporation nForce 750a SLI (rev a2) === ferdy_ is now known as cew_the [06:06] gksudo avggui does nothing, to whoever told me to try it. [06:06] preecher: For what ( video chat, saving videos, both ) ? [06:07] Roasted: maybe some virtual machines later of Linux for good software, I know Windows as host hmm, but better than none at all [06:07] mostly chat [06:07] okay, hell with AVG. What gui based virus scanners are there that will install properly and work fine? [06:07] Roasted: I think to remove that virus [06:07] clam-av, Roasted. [06:07] Roasted: you may need a Windows tool really, ask in ##windows about it [06:07] avast! [06:07] Guest36056: ok, now "cat /etc/X11/xorg.conf |grep driver" [06:07] menza - I have clamav, and I have cl amtk (the gui frontend) and it kind of sucks. I already tried it but it didnt find any viruses when I'm positive I have one on my flash drive. [06:07] losha, didn't do anything really. Printed 4 things to a file [06:08] could i use airprime instead of usbserial. Im using Jaunty! [06:08] Roasted: I have this feeling that maybe none of the Linux virus scanning tools can remove Conflicter, because it's so nasty [06:08] Sirisian: then something went wrong. Where is /dev/sda1 mounted? [06:08] vox: Driver "nvidia" [06:08] sebsebseb: it's conficker, not conflicter [06:08] Guest36056: ok, one sec [06:08] sebsebseb - Yeah, me too. But it's frustrating when I can't even get a damn application to work in Ubuntu and fire up, let alone actually utilize it to get rid of a virus. [06:08] can someone tell me how to lower screen brightness from the terminal??? [06:08] i got a eee pc im running something call easypeasy on.. but i rather have ubuntu on it. i dont have a big usb stick, and i dont got a usb cdrom. so i was woundering. is it possible to install from a iso file located on a hard disk partition ? i remember back in the old days it was kinda an option in the installers. is it still possible ? [06:09] losha, oh whoops I didn't go to where it was mounted maybe? Is that in a specific folder? In like /mnt? [06:09] Roasted: You could delete the infected file using Ubuntu I expect, of course you got to know which one it is first [06:09] sebsebseb - which is where my problem lies :( [06:09] nuxil: how big is your usb stick? [06:09] 1 aur/avast 1.3.0-2 (64) Avast4workstation anti-virus (Home/Non-Commercial Only) [06:09] 512 mb [06:09] doesnt look like avast is free [06:09] requires registration, license key, etc [06:09] nuxil: that *might* be enough for a minimal install-from-usb [06:09] but it's free [06:10] Sirisian: run df -h If it isn't obvious, then paste the output to paste.ubuntu.com & we can look at it together. [06:10] Roasted: I am pretty sure there is something for Windows to remove it though [06:10] Guest36056: ok, now dpkg -l "nvidia-glx**" === william is now known as Guest9948 [06:10] Guest36056: er [06:10] the license key is free, and iirc you don't need it for 60 days, for home use [06:10] Guest36056: ok, now dpkg -l "nvidia-glx*" [06:10] sebsebseb - I have tried the two programs "known" to remove conficker - and it hasnt removed it. [06:10] InitHello, i only need base system installed. and apt. if i get that in. the rest will be pize of cake [06:10] that one [06:11] Roasted: How many files do you have on the Flash drive? [06:11] vox: grep ii? [06:11] Jordan_u: thank you very much, that's very helpful. [06:11] sebsebseb - 8gb worth [06:11] Roasted: maybe it isn't conficker? [06:11] nelovishk: np [06:11] sebsebseb - I have files from work, drivers for all of the systems I work on, etc [06:11] Guest36056: yeah, if you like [06:11] losha - it is. It finds it and detects 2 instances of conficker on my flash drive, but it cant remove it. [06:11] Roasted: I see so lots meaning going manuaully through them all to check that they are ok or not, would take ages [06:11] Guest36056: it should hopefully be nvidia-glx-185 [06:11] Roasted, lol [06:12] or something [06:12] sebsebseb - yeah, it'd be a headache to manually do it. [06:12] look [06:12] boot into safe mode with networking [06:12] and get malwarebytes [06:12] vox: http://pastebin.com/m2f63ede0 [06:12] itl clean up wincrap all day long [06:12] whatis6x9 - wanna know something really interesting? [06:12] whatis6x9 - I did [06:12] Love to [06:12] Really. [06:12] 180.44-0ubuntu1? [06:12] Guest36056: thats the one [06:12] losha, http://paste.ubuntu.com/293659/ [06:12] InitHello, but where do i find this mini install. i need to check the size [06:12] then you cannot afford to keep the install. Backup c:\documents and settings and have fun. [06:13] nuxil: https://help.ubuntu.com/community/Installation/MinimalCD [06:13] whatis6x9 - its not an install, its my flash drive [06:13] InitHello, thanks [06:13] nuxil: no problem [06:13] Roasted, so let me see here... your flash drive windows programs have conficker and you cant clean it? [06:13] Hello all [06:13] whatis6x9 - Programs? No. Data? Yes. [06:13] anyone on a thinkpad? [06:14] whatis6x9: he has 8GB worth of stuff on it, he does not know which file is infected [06:14] vox, so i have an old nvidia-glx driver, namely 180 instead of 185? [06:14] Guest36056: ok, now apt-get install --reinstall nvidia-glx-180 [06:14] Sirisian: ok, the first line shows /dev/sda1 is mounted on root (/). Please type the following: sudo -i ; cd /; du -x | sort -rn > /tmp/du.out [06:14] Guest36056, i recommend the 190.xx beta btw [06:14] Guest36056: nah, 185 is the ubuntu 9.10 nvidia release [06:14] Guest36056: 180 is fine [06:14] 185 is crap. [06:15] no offense to nvidia, but that was a horrible release - ive seen problems on about 50% of nvidia installs with that driver [06:15] massive tearing, refresh issues, etc/ [06:15] vox, do you think the driver got corrupted? [06:15] ok Roasted then youve got to break your job up into folders [06:15] scan one at a time [06:15] Guest36056: well either something is corrupted, your box has bad ram, or your video card has bad ram [06:15] whatis6x9 - I'm just trying to utilize an Ubuntu virus scanner in hopes that perhaps I can zap conficker from my flash drive within Linux. The problem is, I'm also trying to tinker around with linux scanners while I'm at it. The curve ball - they either suck, or are terminal based (whcih is fine) but I'm just trying to find one that works. [06:16] Roasted, what ones have you tried so far? Avast! has a linux binary [06:16] whatis6x9 - AVG, ClamAV, and I tried Avast but it hit me with registration and licensing and Im just not dealing with that crap tongiht. [06:16] Just trying to find something I can just - BAM! Install and scan and get the hell to bed. [06:16] vox, ouch, not what i wanna hear. ok, installed...reboot? [06:17] Guest36056: easiest way === jony123 is now known as jony123_away [06:18] vox, thanks, brb [06:18] Roasted, join #flood [06:18] need help for xserver: unable to create new x config backup file. why? [06:18] Roasted: the licensing is trivial and, if I recall, automated. You fill in the form and it mails you a license number. But you might be better off finding something tailored to conficker in ##windows. [06:18] Roasted, join #flood [06:18] losha, no file is created when I run that [06:19] losha - I did find two applications tailored to conficker in windows, and both failed. [06:19] Sirisian: no /tmp/du,out ? [06:19] losha - at this point I'm almost just trying to find a virus scanner that installs and works in linux without headaches. So far, 2 down, no luck. [06:19] losha, nope [06:19] I'm having a speed limitation problem while using usbserial with my hspa modem. Is there any workaround or alternative that i can use to get the full speed? [06:19] Roasted, there you go - check your pm and liscense the Avast! [06:19] whatis6x9 - thanks. Im still curious about why AVG sucked so badly to install. :( [06:20] Sirisian: did you cut&paste the line I gave you? === idiot is now known as Guest41745 [06:20] losha, yeah and I made sure by looking at it. It's the same charactor for character [06:20] plz need to have two x screens T.T [06:21] how to add printer pls help me [06:21] !printer | choreo [06:21] choreo: Printing in Ubuntu is done with cups. See https://help.ubuntu.com/community/Printers - https://wiki.ubuntu.com/HardwareSupportComponentsPrinters - http://linuxprinting.org - Printer sharing: https://wiki.ubuntu.com/NetworkPrintingFromWindows [06:21] vox, ok...that just re-installed the driver, no? problem still might persist, esp. if its memory/video ram? === ferdy_ is now known as cew_the [06:22] Sirisian: Ah, I see the problem. Please type sudo -i and hit return. Make sure the prompt changes. [06:22] ok gotcha tnx a lot [06:22] Guest41745: yeah, if it keep happening.. something is amiss [06:22] before it seemed to happen more often when i'm playing flash movies [06:23] but i'll keep an eye out [06:23] vox, thanks for your help [06:23] Guest41745: no dramas [06:23] Hm... this is new to me: when I hit ctrl+alt+F2 I get into a fancy screen session instead of a plain shell. Where is this configured? [06:23] losha, okay it's running [06:23] hey [06:23] (I'm on Karmic) [06:23] all [06:23] !karmic | ekontsevoy [06:23] ekontsevoy: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [06:23] Sirisian: now do: du -x | sort -rn > /tmp/du.out [06:23] trying to install flash 10 on 8.10 [06:23] plz X screen help any1? === ferdy_ is now known as wgdhfcgbdjw [06:24] my root partition is on a LVM setup. If I was to shrink the fs etc. and create a snapshot logical volume, would that enable the easy roll-back of the upgrade if something goes wrong? [06:24] when I try to download from adobes site...I get a [06:24] Mylisto: sudo apt-get install flashplugin-nonfree [06:24] error: wrong architechure "i386" [06:24] im attempting to install 9.10 onto a raid using wubi any suggestions? im getting to the install and it shows the "slideshow" but after this it sits at a black screen [06:24] ekontsevoy, ctrl+alt and F1-F12 will take you to the virtual consoles: F7 is usually where X starts - this way you can actually have multiple X sessions running at once as well as the multiple text console F1-F6 -- have fun! [06:24] Azzmodan: Wubi on a raid as well, uhmm doesn't sound good at all [06:24] losha, maybe I have to empty the trashcan thing. I forgot ubuntu has that [06:25] Azzmodan: plus 9.10 isn't out yet and the channel for it is #ubuntu+1 real partitions :) [06:25] ZykoticK9: Thank you, I am quite familiar with consoles, I am just surprised to see screen there. I don't want it, because I run screen via ssh on my servers, and screen inside of screen is painful, so I am looking how to turn this off. [06:25] hi guys, it seems that there is issue with NetworkManager and LEAP. anyone experience this? [06:25] Sirisian: probably. If so, it will show up when the command finishes & we look at the /tmp/du.out file [06:25] NetworkManager + LEAP keeps dropping [06:25] ferdy_ === ferdy_ is now known as cew [06:25] ZykoticK9: in other words I want plain consoles by default as before (I have upgraded from 8.04) === Madcamper is now known as Madcamper`Sleep [06:26] Azzmodan: messaged you by mistake meant to message Aruza [06:26] ekontsevoy, in that case just exit the screen session :) - but i don't know how it works in Karmic - so you might wanna checkout #ubuntu+1 [06:26] Aruza: see above [06:27] Anyone ever come across this usb hspa modem detected as 1c9e:6061. What is the module to use with it to achieve the full speed instead of usbserial? [06:27] er wow [06:27] big channel === gvenkat_away is now known as gvenkat [06:28] Drakotsu: quite. [06:28] You here Drak? [06:28] losha, http://paste.ubuntu.com/293664/ [06:28] Yeah Rat :o [06:28] losha, it would appear my kernel development stuff is taking a little bit of space [06:29] Rat why not query me? lol [06:31] Sirisian: yeah, as you can see, the file lists files and directories, largest first. About 3.7G is your kernel development stuff.... [06:32] that would explain why I'm having problem having more than one kernel at a time [06:32] er 2 kernels [06:33] Sirisian: Agreed. Time to buy a disk... === vivid_ is now known as vivid [06:33] hi everyone [06:33] losha, nah it's a VM. I'm running Windows 7 as host :\ Not sure why I chose 8 GB. I didn't realize my professor wanted me to make a bajillion kernels for an assignment. [06:34] i installed amarok and a codecs and when i went to fix up my animation on ccsm their were missing plugins. can anyone help with this? [06:34] root@prashant-laptop:~# ./mp4cleaner.sh 27082009001.mp4 [06:34] -bash: ./mp4cleaner.sh: No such file or directory [06:35] Sirisian: If you have the space, you can probably grow the virtual disk, or add a second virtual disk.... [06:35] that's what I'm trying right now [06:36] Hi guys, I'm new to ubuntu and not that great with computers & wondering if anyone can help me get sound to work on youtube/myspace? I've been through the forums and tried some of the fixes suggested but as yet nothing has worked. I can play mp3s and video from my computer with sound but the internet is for some reason not working. Any help would be much appreciated [06:37] hi smudge [06:37] which internet browser that are you use? [06:37] hi firdau5 [06:37] smudge what browser are you using [06:37] firefox [06:37] that good [06:37] are your plugins installed [06:37] its should be ok [06:38] adobe? yes [06:38] !apic [06:38] Sorry, I don't know anything about apic [06:38] hey, what does it mean by "timer not connected to IO-APIC"? [06:39] How can I get clamav virus signature updates to install properly? [06:39] http://fpaste.org/AIio/ [06:39] smudge [06:39] are you still there [06:39] yep [06:39] I just wonder [06:40] which ubuntu are currently you use [06:40] 9.04? [06:40] 8.04 I think [06:40] any1 for help...plz help me on this ....http://fpaste.org/AIio/ [06:40] your firefox version? [06:41] umm whatever ubuntu runs? [06:41] you should upgrade your firefox first [06:42] how to? just in applications? [06:42] I have a bunch of .cat .mdl files that says it's emacs lisp source code, how do I access it? [06:42] system ---> Administration ----> Update manager [06:42] yah [06:43] it says sytem is up to date [06:43] firefox current version is 3.0.14 [06:43] ok [06:43] adobe flash player? [06:44] flash player I just downloaded the ubuntu ver from adobe. how can I check firefox version? [06:45] go to Help ---> About [06:45] yep 3.0.14 [06:45] ok [06:46] how do I open a tex file? [06:46] go to Tools --> Add-ons [06:47] then click 'Plugins' icon [06:47] yep [06:48] disappearedng: u can use any text editor, but if u want to compile into a dvi/pdf u need the several packages [06:48] you will see a list of plugins that are currently installed [06:48] hi guys, how to mount a drive? [06:48] i want to mount my sdb1 [06:48] it is fat32, is it mount -vfat sdb1?? [06:48] tk` what's the easiest way to compile them, using latex? [06:48] yep [06:49] you have shockwave flash player there? (I mean in the plugin list) [06:49] disappearedng, i know a bit latex [06:49] ok how should I view them? [06:49] latex %s under command line? [06:50] how do I make my ubuntu system use a file browser for one desktop environment and use a different file bowser for another desktop environment? [06:50] no u need the tex tools [06:50] as in? [06:50] yeah shockwave flash 9.0 r246 [06:50] like what gtk app can open them directly without the need for compilation [06:50] mine is 10.0r32 [06:51] disappearedng, what are you trying to do? [06:51] disappearedng: any gtk ap would need those supporting pckges .. [06:51] but I think thats not the matter [06:51] do you have mplayer plugin? [06:51] disappearedng: its call texlive or something ... good ides are texmaker and kile [06:51] im not sure? [06:51] ok I just downloaded a bunch of tex files, and I am wondering how I could read them [06:52] i did install texlive, but there is no command texlive [06:52] disappearedng, you have to compile them [06:52] the command is latex file.tex [06:52] so you have to compile right? [06:52] u can actually read the code by any editor [06:52] smudge, you may try to install these plugins if you dont have them yet [06:52] like emacs [06:52] mplayer [06:53] 2- VLC Multimedia plugin [06:53] hello all [06:53] what about .cat files [06:53] disappearedng, if the author of the tex file didnt use special package then you should be able to latex file.tex [06:53] I'm havin' some trouble here [06:53] ok cool [06:53] disappearedng, dont know about cat file [06:53] disappearedng: Or, if you prefer it in the format of a PDF, pdflatex [06:54] and quicktime plugin === schemer999_ is now known as schemer999 [06:54] disappearedng, after u did latex file.tex, you need to view them with xdvi file.dvi [06:54] brb [06:54] just as I get set ubuntu set up, it drops to a root shell and the OS fails to boot [06:55] !help [06:55] Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) [06:55] disappearedng: on sidenote evince can open dvi too [06:55] I've already got vlc media player but I didn't have mplayer & I can't find quicktime in the add/remove programs? [06:56] mplayer plugin will install the quicktime plugin as well divx plugin [06:57] 'Lo #Ubuntuites. I've installed libxine1-ffmpeg, and Amarok 2 still isn't playing MP3's. Isn't that the right package to do it? And yes, I have the Medibuntu package enabled. [06:57] I always installed the gstreamer plugins [06:57] *Medibuntu repository. [06:57] hi, I have a virtual machine running ubuntu karmic [06:57] hellmitre: I've got those too. They work for Exaile and Rythmbox, but not Amarok. [06:57] ok I now have mplayer [06:57] !karmic | pablo_ [06:57] pablo_: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [06:58] hrm, Keaton [06:58] I upgraded today and after rebooting I'm getting Failed to connect to socket /com/ubuntu/upstart: Connection refused [06:58] to pretty much anything I try to start [06:58] need to wait untill the installation is finished than restart the firefox [06:59] pablo_: I repeat. Try #ubuntu+1. [06:59] ok I'll try that back in a minute [06:59] thanks MenZa, trying that [06:59] HOW DO I GET MY SCREENSAVER TO RUN [07:00] LEAVE YOUR COMPUTER ALONE FOR A WHILE [07:00] anyone know a good webcam prog for a creative webcam? [07:00] preecher, cheese [07:00] sorry--i meant to say other than cheese [07:00] i do but it just goes to a blank screen [07:00] oop [07:00] then nevermind [07:00] i use cheese now but pic stays fuzzy [07:01] what should i do [07:01] hello [07:01] hi chrissy [07:02] hello [07:02] I got a small question about ownership of folders. I set up lighttpd with a vhost and made a user for vsftpd to upload files to the vhost dir. To be able to run the files from lighttpd I have to run a chown www-data:www-data or I will get 403. Is there some way to be able to upload the files and still run them in lighty? [07:02] i am trying to get my screensaver to work [07:02] go to ---> System ----> Preferences ---> screen saver [07:02] ok than what [07:03] apparently wiki.ubuntu.com is 503ing... [07:03] would there be a problem with adding a 2gb file to a .rar file? it says Couldn't create the file and I'm suspecting that large file [07:03] adjust the computer idle time [07:03] to what === MadMax is now known as MaxSid [07:03] firdau5 thanks very much it's working!! [07:03] to 1 minit [07:04] then you leave your computer [07:04] ok hold on [07:04] hi smudge... you're welcome [07:04] have a great day [07:04] hi all, does anyone know how to check my hdd that has a windows os on it how many bad sectors is on the hdd through live cd? [07:05] hi wolfy, you can try nst from sourceforge.net website [07:05] see i have done that before and all i get is a blank screen [07:05] thats an opensource software [07:05] chrissy [07:06] yes [07:06] you may didnt set which type your screensaver yet [07:06] i did becaus it shows which one i have === __Techie__ is now known as _Techie_ [07:07] you should choose the screen saver in the screen saver theme list [07:07] GhostWolfy: the only way I know of would be to download & use smartmontools to look at the SMART data (http://en.wikipedia.org/wiki/S.M.A.R.T.), or perhaps to boot the manufacturer's own diagnostic disk [07:07] firdau5, i don't wanna go to a site i wanna try to do it from the live cd and the hdd i want to scan only has windows on [07:07] it [07:07] instead of 'blank screen' [07:07] losha, ok [07:07] that click OK [07:07] ok hold on i will check [07:08] now I am ubuntu system engineer I guess :D :P [07:09] hehe [07:09] \ [07:10] if you find badblocks, is there a command to check the mft or fat and see what files are effected? [07:12] al_: see if this helps: http://smartmontools.sourceforge.net/badblockhowto.html Note that by the time a modern drive reports bad blocks, it usually means it's already tried to reallocate the block and failed i.e. the drive has essentially already gone bad and should no longer be considered reliable... [07:13] fngfdg [07:13] help me [07:13] hi kiran === kiran is now known as Guest89092 === firdau5 is now known as firdaus [07:14] losha: does bad blocks show reallocated bad blocks, or only show badblocks afer its run out of reallocations? === firdaus is now known as firdaus5 [07:14] hey i am back i picked a new screensaver so we will see [07:15] :) === LeNsTR|Sleep is now known as LeNsTR [07:15] if i have one livecd booted, then i put in another ubuntu install usb drive, where is the installer for ubuntu on the usb drive? [07:15] Computers for the masses, not the classes === corey___ is now known as corey [07:15] davebs [07:15] the installer is nowhere [07:15] what is the name of the kubuntu volume manager? [07:15] you need to run the live cd first [07:15] also my screen goes dimmer when im inactive for a few minutes and in my settings i have this function turned off-any idea how to keep my screen at its brightest at all times [07:16] than click at the 'install' icon [07:16] i have and it won't work [07:16] the live cd crashes [07:16] yeah [07:16] first it gave me this weird multi color screen === firdaus5 is now known as firdau5 [07:16] then i hooked it to another monitor and it just gave me black [07:16] what are you usn? [07:16] 9.04? [07:16] i tried "framebuffer=false" [07:16] yes, 9.04 [07:16] i've tried regular and alternative [07:17] and the working one is? [07:17] alternative gave me a kernel panick [07:17] haha [07:17] the working one is backtrack 4, kubuntu basically [07:17] sounds your hardware is messed up [07:17] that's what i've been thinking [07:17] long time no see the 'kernel panic' [07:17] so i've been running a memtest [07:17] but nothing yet [07:17] ya [07:17] i jsut built the system today [07:17] so i'm trying to narrow down at least where the hardware problem is [07:17] atom cpu? [07:17] sound that its not supported your machine [07:18] Hi... Situation : After Installing Server amd64 9.10 , i can`t start ubuntu... during boot process, system can`t mount /dev/sda1.... ext4 or ext3 it doesn`t matter, result is the same. BUT 9.04 installation works fine with ext3/ext4... Any ideas? [07:18] al_: er, I'm actually not sure if the Ubuntu mapping of blocks to files stuff works on microsoft filesystems. The SMART data for the drive should tell you how many *actual* reallocated sectors the drive has had to do. but I actually think the filesystem only reports bad blocks after the drive fails to reallocate successfully, but that might vary between manufacturers.... [07:18] it's a core 2 duo 5400 [07:18] 2 gigs ram [07:18] pc 800? [07:18] ok [07:18] 500 gig segate [07:18] *seagate [07:18] sata [07:18] try run the ram at lower clk [07:18] yeah? [07:18] can i set that in the bios? [07:18] at least try, if it works you ram is ucked up [07:18] your mother board is intel right? [07:18] yeah [07:19] gigabyte is manufacturer, but i think it's intel stuff inside [07:19] does anyone know why eclipse isnt configured properly for software updates in ubuntu 9.1? [07:19] losha: yer i thought there might be a linux tool for it, guess not [07:19] than your ram is not either kingston or apacer? [07:19] Degot: why you would want to run a release that's barely in beta on a server is beyond me... [07:19] it's cheap, whatever it is [07:19] I see [07:19] i was trying to build a basic linux server for realtively cheap but w/ decent stuff [07:19] I suspect.. its your ram [07:19] but yeah, i skimped on the ram, bought cheapest stuff on newegg [07:20] i always use ECC, and i dont care if its 50 bucks more [07:20] would that explain the initial graphics problem? [07:20] try to use apacer or kingston ram first [07:20] snkcld: to be precise that is 9.10 not 9.1 as the '10' refers to the month it is released in. [07:20] because i was concerned it was the onboard video [07:20] i'm just trying to use this w/out a monitor, keyboard, just connect via vnc once i get it setup [07:20] ah i did not know that, thank you [07:21] thats a good point though [07:21] so 9.1 would be for a january release [07:21] but i guess that's what i get for going cheap, haha [07:21] al_: well there is, but it's for *linux* filesystems, which doesn't seem unreasonable. The smartmontools stuff will still work though... [07:22] snkcld: yes it would.. but as ubuntu is a 6 month release cycle it is unlikely to happen in January. [07:22] its 9.10 year 9 month 10 [07:22] ahhh [07:22] graphics, may be related with xserver [07:22] the following codename of 10.4 is lunatic lemur [07:22] but [07:23] try to change your ram first [07:23] does installing flash 10 on a 64-bit system, via the link in the instructions here: http://queleimporta.com/en/finally-adobe-releases-native-64-bit-flash-10-for-linux/ require a reboot? I've got that installed and I even tried flash-nonfree (or some spelling)... I restart firefox, and/or kill the process and start it up again and it still says I don't have it installed... maybe I should reboot? [07:23] hi. what is a client in any window manager? [07:23] alteregod: ha ha good one. [07:23] that's what i can't figure out, i'm looking at kde working fine right now, but ubuntu won't install [07:23] i'll try switching out ram? [07:23] captain: no [07:23] Sigh. time-based releases. Lucy & Ethel on the chocolate assembly line... [07:23] got ubuntu-restricted extras installed too... [07:23] just restart your bowser, and mario will be happy [07:23] alteregod, so I can't figure it out... [07:23] alteregod, did - as I said [07:24] CaptainMorgan: when I installed flash I had to log out and the log back in for it to go properly, I didn't reboot. [07:24] alteregod, might it be affected by cache ? [07:24] neil_d, ah... suggesting maybe an issue with a process or X... okay, I'll try that [07:24] yeah restart x [07:25] I remember it working in like... 6.04 immediately have install - no need to restart X or reboot... oh the days [07:25] any suggestion for a good webcam prog other than cheese? [07:25] how do i get whatever is trying to auto mount a filesystem to stop [07:25] s/have/after/ [07:26] CaptainMorgan: I think its to do with 64bit kenel [07:26] hallooo [07:26] does anyone know why eclipse isnt configured properly for software updates in ubuntu 9.10? [07:26] phantomcircuit: you need to change the /etc/fstab file. [07:27] !karmic | snkcld_ [07:27] snkcld_: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [07:27] snkcld, you mean eclipse the programming software? [07:27] yea [07:27] snkcld, like ubottu said 9.10 is beta..in jaunty it works fine [07:27] hey ubottu [07:27] ah ok, that makes sense [07:27] neil_d, it's not in fstab [07:28] what? [07:28] it's a flash drive [07:28] what is the auto mounting daemon called [07:28] Using GNOME/Nautilus my CDs are automatically mounted, but I can't seem to mount them in E17 with a 'mount' command. Any help? [07:28] phantomcircuit: is it a removable drive? [07:28] good morning folks... I am seeking a png viewer capable of handling huge files - I have a 25k** fractal I've rendered... even though I can only look at approx. 20% of the image, my RAM runs up [07:28] it seems a little bit rough [07:28] neil_d, yes [07:28] cHES: ARE YOU STILL HERE? [07:29] phantomcircuit: then it probably controlled by a udev rule and I don't know much about that. [07:29] baccenfutter, use a old acdsee with wine [07:29] phantomcircuit: You can toggle off the automount in gconf-editor. Where? I'm not sure. That should give you some head starts. [07:29] alteregod: you kidding me? [07:29] Losha are youbusy? [07:29] thisisnotsoeasy [07:30] wine is great, firefork runs 20% faster [07:30] baccenfutter, how much ram you have? [07:30] 2G [07:30] phantomcircuit: $ gconf-editor --> apps > nautilus > preferences --> Uncheck the "media_automount" option [07:30] pic is approx 2.4 G in uncompressed size [07:30] 30 M in png file format [07:30] what? [07:31] yep [07:31] 2.4gb lol [07:31] 25k x 25k [07:31] RGB color [07:31] 8 byte [07:31] calc yourself [07:31] Dishtroyer: I'm here. But it's nearly bedtime (11:30pm). What's up? [07:31] yeah use 10bit color please [07:31] alteregod: it took all night to render the pic [07:31] get more ram with those insane files [07:32] CaptainMorgan: did it work? [07:32] hi losha [07:32] airprime module is missing in 2.6.28 kernel source package. Any body knows where i can find it? [07:32] consider at least 8gb [07:32] at my place, now 2.30pm [07:32] heh [07:32] 1990 a mb ram was 150 bucks [07:33] alteregod: assumably there should be a viewer aware of the fact, I am only looking at approx 1024x768 pixel... why through the rest in the ram??? [07:33] I can't play my audio CD when I insert it using E17/Rhythmbox. Gnome/Nautilus automatically makes it available in Rhythmbox, however. [07:33] firdau5: wow, Kuala Lumpur... [07:33] alteregod: and was considured a lot of memory. [07:33] yah,, its rigth [07:34] baccenfutter: i got no clue try something else [07:34] grrr [07:34] baccenfutter, use "convert" in a command line to cut it down into multiple smaller parts? [07:34] xnview or something [07:35] and compress the png to the fractal image format [07:35] it takes aprox a year to compress such a file [07:36] how big is the file? [07:36] Ladies and gentlemen I have a problem with ny hard drive file system. I can only use ubuntu from a live cd. How do I do a fsck from the live cd on my partition sda5? [07:36] hello all [07:36] ActionParsnip: 30 MB [07:37] Dishtroyer: boot to the live cd and read this: [07:37] Dishtroyer: man fsck [07:37] Lo all. [07:37] baccenfutter: 1 year for a 30Mb file? [07:37] Dishtroyer: can you boot into recovery mode? [07:37] ActionParsnip: I didn't say the year thing [07:37] ActionParsnip: that's not very helpful [07:38] sure it is [07:38] Stupid Question: Knowing that I could actually write C coding language into the text editor and save the file with the ".c" extension, I'm curious to know if there is - perhaps - an actual editor built for Ubuntu 9.04 that I could use to code in instead of using the text editor....? [07:38] ziroday: teach a guy to fish [07:38] I'm not sure recovery mode will work [07:38] Dishtroyer: why not? [07:38] fine === navid is now known as nahy [07:38] fsck should not be run when drives are mounted [07:39] alteregod, thanks - you'd think by now there'd be better support for 64 bit [07:39] teknozwizard, gedit can markup C [07:39] I try to boot and it go through a file check and then fails. It asks me for a root password or Control -D [07:39] fsck -A will check all things in fstab [07:39] teknozwizard: emacs or vi are the traditional answers, i guess [07:39] The password doesn't work and the control-d just reboots the system [07:39] Dishtroyer: okay, from there you can run fsck. Or from the live you can run " sudo e2fsck -C0 -p -f -v /dev/sda5" [07:39] Dishtroyer: ya just type control d [07:40] Dishtroyer: boot to live cd desktop, unmount all partitions and run: sudo fsck -a /dev/sda5 [07:40] Dishtroyer: the command above should help :) [07:40] OK brb [07:40] Dishtroyer: fsck has failed. Run fsck manually, you will now be dropped to a maintenance shell is the message i believe [07:41] Dishtroyer: also what version of ubuntu are you using, this sounds similar to bug that existed a while back [07:41] hassanakevazir, foofish: right, I call "gedit" text editor and I do not care too much for vi or emacs. That's why I was wondering if there was another editor out there. [07:41] ziroday: there is no -v option, theres -V though (verbose output) [07:41] This is 8.04 [07:41] BRB [07:41] ActionParsnip: err -v and -V are the same. [07:41] teknozwizard: there are gobs of them [07:42] ziroday: linux is case sensitive though right?:-/ [07:42] ActionParsnip: yeah -v also does the same [07:42] teknozwizard: i don't know anything except emacs really, as that does everything i want. but apt-cache search is your friend === matt___ is now known as matyd [07:42] indus: gotcha [07:42] teknozwizard: oh yes, kedit/kile may be worth investigating [07:42] the man is not always updated [07:42] foofish: Some examples? I'm actually coming off of MSS 2008 Pro edition with Visual Basic. [07:42] man woman :) [07:42] ActionParsnip: yes, they are the same switch however [07:42] ziroday: just trying to teach a guy to fish rather than just throwing them commands that they will forever not know about [07:43] oops no man exists for woman :D [07:43] !ot | indus [07:43] indus: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics. Thanks! [07:43] ziroday: just didnt see the lower case in the man page [07:43] I've problem with VMWare... [07:43] ActionParsnip: I'm really not into getting into this argument, and especially not here :) [07:43] teknozwizard: kdevelop? [07:43] foofish: Heh, note to self: typing "apt-cache search editor" isn't a good idea! ^_^ [07:43] i just upgraded from 9.04 to 9.10 and now when i boot up the screen is black. i've managed to get into command line and run irssi but i can't figure out how to get the gui working again.. i had to install with noapci(is that correct?) cause i have intel chipset [07:43] ziroday: ok but we both have points, lets leave it there :) [07:44] matyd: #ubuntu+1 should have your back [07:44] ActionParsnip: :) [07:44] you have a fine point, and the manual is not complex. [07:44] wow [07:44] firdau5: you might find #vmware more useful [07:44] thanks ziroday [07:44] matyd: its noacpi ,rather use acpi=off [07:44] why is it so damn hard to disable auto mounting removable media? [07:44] teknozwizard: http://ubuntuforums.org/showthread.php?t=6762 [07:44] seriously wtf [07:44] foofish: Thanks for the tips, I'll go look into that. [07:44] well its installed and upgraded already heh [07:45] phantomcircuit: go to nautlius > preferences>media and uncheck stuff [07:45] Hi! Is there anyway to prevent nm-applet to try to connect every time to my neighbour wifi rather than mine? [07:45] was working perfect before i upgraded [07:45] OK I did sudo -a fsck /dev/sda5 and now it says /dev/sda5/ contains a file system with errors. check forced. and now its just sitting there doing nothing [07:45] phantomcircuit: sudo apt-get remove gnome-volume-manager [07:45] Dishtroyer: did you not run the command I have you? [07:45] ActionParsnip, you're solution for a configuration issue is to REMOVE the mounting daemon? [07:45] phantomcircuit: or [07:45] really? [07:45] phantomcircuit: less extreme: System->Preferences->Removable Drives and Media and then uncheck the first two boxes on the storage tab. This will turn off automounting for everything not defined in /etc/fstab, [07:46] phantomcircuit: have you tried "gconftool-2 --type bool --set /desktop/gnome/volume_manager/automount_drives true"? [07:46] Dishtroyer: wrong syntax , sudo fsck /dev/sda5 [07:46] there *is* not Removeable Devices and Media under preferences [07:46] Dishtroyer: do not run fsck if any partitions are mounted [07:46] Dishtroyer: always run sudo umount -a then do whatever [07:47] OK it saysunexpected inode fsck failed run fsck maualluy without any - a [07:47] phantomcircuit: or you can simply kill gnome-volume-manager and use bum so it never gets autoloaded at startup [07:47] Yes I umounted it [07:47] Dishtroyer: please run the command I gave you. [07:47] OK ziroday [07:47] how can i destroy bowser? [07:47] BRB [07:47] alteregod: wrong room :) [07:48] phantomcircuit: gconftool-2 --type bool --set /apps/nautilus/preferences/media_automount false [07:48] faraz__: [07:48] ActionParsnip, yes i did that [07:48] can somebody paste the output of 'ls -al /dev/fuse' please? [07:48] why would rar say file too large on a reiserfs disk? [07:48] koolhead, [07:49] so the problem i was having is the flash drive fs is corrupted [07:49] so obviously it cant be mounted [07:49] but with auto mount + auto browse turned on [07:49] Boohbah, crw-rw-rw-+ 1 root fuse 10, 229 2009-10-14 10:46 /dev/fuse [07:49] i could never get past the error messages [07:49] phantomcircuit: i'd just pull out the daemon, its not system essential so you can still reinstall it in the future. [07:49] faraz__: how are things out there.read the news. [07:50] it says invalid command 0 [07:50] errr. [07:50] invalid option -- 0 [07:51] out where? in pk? [07:51] Dishtroyer: its o not zero [07:52] Dishtroyer: oops ignorethat [07:52] Dishtroyer: so are you in the recovery console now? [07:52] Dishtroyer: show the command you entered to get help. [07:52] hi. my messenger doesn't work (pidgin) it just can show the empty groups. i just reinstalled it but again the same problem [07:53] nahy: close pidgin, rename ~/.purple then relaunch [07:53] alteregod, ActionParsnip: http://backenfutter.crew.c-base.org/julia_klein.png.gz [07:53] when I type in sudo e2fsck -c0 -p -f -v /dev/sda5 [07:53] took approx 6h to render [07:53] where can i find it [07:53] it says invalid option --'0' [07:53] Dishtroyer: capital C [07:53] Oooooo [07:53] BRB [07:53] nahy: ~/.purple is the folder [07:54] nahy: ~/.purple == /home/$USER/.purple == $HOME/.purple [07:54] found it [07:54] but what name should i give [07:54] nahy: only rename, this folder stores the pidgin settings, you can then try with a blank profile [07:55] hey [07:55] hey [07:55] nahy: anything you like. something like .purple_old is okay but you can call it .purplethatisgivingmegrief or .purple_15Oct09 [07:55] ok [07:56] thanks [07:56] baccenfutter: pretty click image dude. like it [07:57] ActionParsnip: wish I could look at it^^ [07:57] baccenfutter: try imagemagick [07:57] ActionParsnip: manelbrot is still rendering 25k x 25k [07:58] nahy: apps like folders to be named what they like, if its different a fresh one will be made and you can reconfigure your accounts to see if its a bad app or just a bad profile [07:58] ActionParsnip: it's a 106 lines py script, that did the rendering... [07:59] ActionParsnip: but it has the same problem again. should i have a clean uninstall...? [07:59] baccenfutter: slick [07:59] /dev/sda5: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. [07:59] (i.e., without -a or -p options) [07:59] nahy: sounds like it, you can rename the old profile back now as you can suspect the app [07:59] ActionParsnip: how do I call imagemagick... I installed it, but can't find it [07:59] baccenfutter: i like punchy code like that [08:00] baccenfutter: that's cool [08:00] ActionParsnip: http://backenfutter.crew.c-base.org/fractals.html [08:00] Dishtroyer: so just type fsck [08:00] ActionParsnip: i did as you said and it shows the app is not working [08:00] the picture you posted earlier [08:00] ActionParsnip: not my code, though [08:00] I did [08:00] baccenfutter: imagemagick is not a single program [08:00] Dishtroyer: and it will run [08:00] Dishtroyer: without any parameters [08:00] sudo fsck /dev/sda5 [08:00] Dishtroyer: fsck [08:00] hi, please anybody here with a macbook? i 'm having troubles installing the b43 module. The new wl one won't let me monitor, so i need b43 [08:00] iceroot: I only know it as apache extension thingy [08:01] baccenfutter: display [08:01] hey [08:01] Dishtroyer: just run fsck with sda5 or anything and tell me wht it says [08:01] baccenfutter: its a CLI-graphic-manipulation-tool [08:01] Dishtroyer: without sda5 i mean [08:01] display: magick/blob.c:472: CloseBlob: Assertion `image->signature == 0xabacadabUL' failed. [08:01] ActionParsnip: what is the command for clearing it (pidgin) completely? [08:01] wht r sum other good chan? [08:01] Aborted [08:01] ubuntu@ubuntu:~$ sudo fsck /dev/sda5 [08:01] fsck 1.41.4 (27-Jan-2009) [08:01] e2fsck 1.41.4 (27-Jan-2009) [08:01] /dev/sda5 contains a file system with errors, check forced. [08:01] Pass 1: Checking inodes, blocks, and sizes [08:01] Pass 2: Checking directory structure [08:01] krissy2k9: what are you looking for [08:01] Dishtroyer: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [08:01] nahy: sudo apt-get --purge remove pidgin; sudo apt-get --purge autoremove [08:01] Dishtroyer: yeah so fsck finished [08:02] omg sumthing im so new at this [08:02] baccenfutter: what did you make that 6h render with? [08:02] help [08:02] DigitalKiwi: http://backenfutter.crew.c-base.org/fractals.html [08:02] krissy2k9: what help do you need [08:02] ActionParsnip: one of them or step by step should i use both? [08:02] ah ok [08:02] i wanna serf chan but dnt knw how [08:02] Distroyer got banned [08:03] nahy: both on the same line, hence the semicolon [08:03] yes. I guess. its asking me if I want to connec to lost and found [08:03] Yes or no? [08:03] Dishtroyer: is fsck finished? ] [08:03] yes [08:03] yes [08:03] Dishtroyer: so now reboot [08:03] so ne help is nice [08:04] e2fsck 1.41.4 (27-Jan-2009) [08:04] great [08:04] shes gonna need ALOT of help [08:04] /dev/sda5 contains a file system with errors, check forced. [08:04] Pass 1: Checking inodes, blocks, and sizes [08:04] Pass 2: Checking directory structure [08:04] * FloodBot2 sets mode +z #ubuntu [08:04] firdau5: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [08:04] * FloodBot2 sets ban on %Dishtroyer!*@* [08:04] !paste | Dishtroyer [08:04] Dishtroyer: For posting multi-line texts into the channel, please use http://paste.ubuntu.com (or !pastebinit for CLI) | For pasting !screenshots use http://tinyurl.com/imagebin Please give us the URLs for your posts! [08:04] hey please 1 question, how is it possible that the obiwan_ nick isn't registered? it is really common, can i register it? [08:04] !register obiwan_ [08:04] !register |obiwan_ [08:05] Error: I am only a bot, please don't think I'm intelligent :) [08:05] obiwan_: Information about registering your nickname: http://freenode.net/faq.shtml#userregistration - Type « /nick » to select your nickname . Registration help available in #freenode [08:05] !register | obiwan_ [08:05] thankss prince_jammys [08:05] sorry about that. [08:05] muted [08:06] fsck isn't finished [08:06] it keeps asking me if I want to connect unnattached inodes to lost+found [08:06] Dishtroyer: sure say yes [08:07] !ask | krissy2k9 [08:07] krissy2k9: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) [08:07] hey, is it possible for staff to read my password? [08:08] obiwan_: no [08:08] obiwan_: dont know [08:08] ok now its finished. ALOT of errors though [08:08] ok thanks both :) [08:08] Dishtroyer: thats ok [08:08] obiwan_: it's stored in an encrypted, undecryptable hash format [08:08] Dishtroyer: so now it finished successfully? [08:08] then i can use the same pass i use for my linux user [08:08] obiwan_: if you lose your password, freenode staff can send you a password reset key [08:08] I believe so indus [08:08] obiwan_: whats the password? [08:08] :P [08:09] obiwan_: using a different password is a better idea [08:09] Dishtroyer: ya so now reboot i guess [08:09] why you wanna now :P? [08:09] obiwan_: connections to freenode aren't encrypted [08:09] obiwan_: i would suggest that to be a Bad Idea [08:09] I'm going to reboot [08:09] my password is nimda [08:09] hmm ok :/ [08:09] If it works I'll see you in a few [08:09] current most popular password = 123456 [08:09] obiwan_: yes i suggest keep a totally diff password for irc [08:09] hhaah lol firdau5 xddD [08:09] hello [08:10] hello jdevel [08:10] !irc [08:10] A list of official Ubuntu IRC channels, as well as IRC clients for Ubuntu, can be found at https://help.ubuntu.com/community/InternetRelayChat - For a general list of !freenode channels, see http://freenode.net/faq.shtml#channellist - See also !Guidelines [08:10] I was hoping someone could point me in the direction of a channel that has a lot of knowledge w/ c programming? [08:10] irchelp [08:11] jdevel: ##c [08:11] guys what is the help channel for irc [08:11] channel name is ##c [08:11] ? [08:11] indus: #help [08:11] jdevel: yes. [08:11] thank you very much. [08:11] indus: #freenode [08:11] iceroot: there is no #help; it's an empty redirect to #freenode [08:12] jdevel... /join #freenode [08:12] lstarnes: so with #help you get the help you want :) [08:12] there is no channel named #help [08:12] iceroot: it's not #help [08:12] iceroot: it's #freenode [08:12] Question, how do I set a root password, currently when I sudo I use the same password to login to my account... which is very insecure. [08:13] !sudo | MoralExpl : read about sudo [08:13] MoralExpl : read about sudo: sudo is a command to run programs with superuser privileges ("root"). Look at https://help.ubuntu.com/community/RootSudo for more information. For graphical applications see !gksu (Gnome, XFCE), or !kdesudo (KDE) [08:13] MoralExpl: that's actually somewhat more secure than setting a root password [08:13] lstarnes, how so? [08:13] lstarnes: and if you join #help you will go to #freenode so its all fine if you use #help :-) [08:13] MoralExpl: forget all about root and your system will be much safer [08:13] iceroot: but you shouldn't use #help [08:13] MoralExpl: setting a root password opens up the root account to the same vulnerabilities that other accounts with passwords have, and root is the mosat frequently attacked account [08:13] well my stranger friends.. its ok [08:13] Can I set a more secure sudo password === obiwan_ is now known as obiwan__ [08:14] MoralExpl: everyones sudo password is the same as the one they log in with, that is normal [08:14] and keep my username password the same [08:14] MoralExpl: no [08:14] MoralExpl: use a more secure account password [08:14] MoralExpl: sudo-password == userpassword [08:14] wow. [08:14] MoralExpl: account pass == sudo pass [08:14] that's kind of a letdown [08:14] MoralExpl: if you change your account pass you will need to use the same new pass for sudo [08:15] My usual root password is 23char long [08:15] hello team [08:15] MoralExpl: then use that for your logon [08:15] takes too long [08:15] My usual root password is 23char long <---- wow... now you gave us the clue :D :p [08:15] MoralExpl: the whole idea behind sudo is that certain users have the right to do certain things. those special users use their own password to access special privileges. [08:15] MoralExpl: if its usual, arent you awesome at typing it ;) [08:16] is there a way to setup a root account? [08:16] yeeeeeeeeeeeeeeah i'm registered now ! :) [08:16] MoralExpl: you can use: sudo -s to get an interactive root-like terminal [08:16] MoralExpl: yes but you dont need a root-account [08:17] aight i guess ill just change my password [08:17] guys i made an email template in openoffice how can i send it as an email, it seems to just make it an attachment === GamesMedic is now known as Dishtroyer [08:17] ActionParsnip, MoralExpl: sudo -i is preferred over sudo -s. -i imitates a root login, while -s just launches a shell as root with your user's current environment [08:17] YAY!!!!!!! [08:17] hi [08:17] Im back up [08:17] yea [08:18] passwd: password updated successfully [08:18] what is the name of the torrent client installed in ubuntu by default [08:18] help.ubuntu.com is down [08:18] yeah, i just noticed. [08:18] NorwayGeek: transmission afaik [08:19] NorwayGeek, transmission [08:19] thanks :) [08:19] * prince_jammys was about to chastise for not bothering to read ubottu's sudo link. [08:19] aight [08:19] thanks guys [08:19] im out [08:19] Dishtroyer: problem solved? [08:19] NorwayGeek: its got a groovy web interface too ;) [08:20] hey it's nt a correct place but still anyone knows what does " typedef area_t (FloatingPlacement) (client *) " infer?? [08:20] he's gone [08:20] nic1: infers the wrong channel. /join ##c , likely. [08:20] or ##cpp, perhaps. [08:20] or whatever language it is [08:21] indus: yes! Now I need help changing my password. I forgot it. [08:21] guys i made an email template in openoffice how can i send it as an email, it seems to just make it an attachment [08:21] !password | Dishtroyer [08:21] Dishtroyer: Forgot your password? See https://help.ubuntu.com/community/LostPassword What's the root password? See !sudo. Don't see *** in password prompts? That's normal. Sudo doesn't ask for your password? It remembers you for several minutes. Please use strong passwords, see https://help.ubuntu.com/community/StrongPasswords [08:22] Dishtroyer: sudo passwd yourusername [08:22] interesting suggestion. [08:23] Its asling me for my password. I don't remember [08:23] does anyone know of a good webcam prog to use in ubuntu for a creative webcam other than cheese [08:23] take ubottu off /ignore? [08:24] Dishtroyer: ok i cant help you then [08:25] Dishtroyer: you dont remember your sudo password? [08:25] preecher: amsn maybe [08:25] thanks ActionParsnip [08:25] Dishtroyer: if you mean your logon/sudo password you can boot to root recovery console and type: passwd [08:25] Dishtroyer: to set your password [08:25] hello all [08:26] Dishtroyer: if you are already logged in as the same user, you can simply run passwd to set your own password [08:26] ActionParsnip: there is no need to go to recovery console for that [08:26] anyone having issues with getting webcam to work/detect on ubuntu 9? [08:26] OK when I go into terminal it has myusername@ubuntu [08:26] Dishtroyer: ya just type sudo passwd at terminal [08:26] I type sudo passwd alan and it asks me for myexisting password [08:27] * prince_jammys is deeply confused. [08:27] geekphreak: run: lsusb one line will identify the cam, you can start websearches using the 8 hex character ID [08:27] suigeneris: thanks [08:27] Dishtroyer: how did you log in in the first place? [08:27] Dishtroyer: are you logged in as alan? [08:27] ActionParsnip: thank you will do [08:27] I don't have a password enabled [08:27] np [08:28] It just boots ito my aacount automatically [08:28] Dishtroyer: if you type: whoami does it say alan [08:28] ok that is showing my cam [08:28] Actionparsnip: yes [08:29] getting to google now ty [08:29] geekphreak: ok the 8 caracter hex bit is the cam, what is printed on the plastic case means nearly nothing, copy / paste that code into a websearch and put ubuntu on the end, see what you get [08:29] i hate to keep asking questns but ima linux noob--also do anyone know of a good and easy firewall for ubuntu [08:29] Dishtroyer: then just type: passwd then, you can now set your password [08:29] !firewall | preecher [08:29] preecher: Ubuntu, like any other linux distribution, has firewall capabilities built-in. The firewall is managed using the 'ufw' command (see https://help.ubuntu.com/community/Uncomplicated_Firewall_ufw), or 'iptables' (https://help.ubuntu.com/community/IptablesHowTo). GUI applications such as Firestarter/Gufw (Gnome) or Guarddog (KDE) also exist [08:29] alan@Workgroup:~$ passwd [08:29] Changing password for alan. [08:29] (current) UNIX password: [08:30] !password | Dishtroyer [08:30] Dishtroyer: Forgot your password? See https://help.ubuntu.com/community/LostPassword What's the root password? See !sudo. Don't see *** in password prompts? That's normal. Sudo doesn't ask for your password? It remembers you for several minutes. Please use strong passwords, see https://help.ubuntu.com/community/StrongPasswords [08:30] thanks again [08:30] I dont know it [08:30] Dishtroyer: is it asking for the current password? [08:30] hi! [08:31] YES [08:31] Dishtroyer: your password is the one you type when you use sudo, or when synaptic asks you for a password [08:31] please, how can i change my password in freenode? just to know [08:32] I have a bash scripting problem: echo $current_home | sed 's/\//\\\//g' works fine, but esc_current_home=`echo $current_home | sed 's/\//\\\//g'` doesn't. Someone can explain why? [08:32] sam_: i'd ask in #bash [08:32] ARgggggggggggggggg! [08:32] sam_: /j #bash [08:32] ok [08:32] thanks [08:32] How can I get clamav virus signature updates to install properly? [08:33] intok: isnt it: sudo freshclam [08:34] how can I list files inside a installed deb?? just like rpm -ql from rpm-based linux does?? [08:35] ActionParsnip nice, now if only the auto update would actually work by default [08:35] c0l2e: dpkg -L packgname [08:35] c0l2e: if you mean "what files where installed in my system from a package?" [08:35] s/where/were/ [08:36] yes [08:36] intok: could cron the clam update if the auto update sucks [08:36] feware [08:36] telnet [08:36] exit [08:39] i trashed a kubuntu install trying to get old video drivers for a 9200se, but i used to used the livecd to copy my home folder somewhere else and now i have freshly installed kubuntu again and copied home folder back, but im getting a few small probs. firefox wont open right, prob due to the lockfile i read about, and when i open the terminal window i get a error about "Configuration file "/home/tred/.kde/share/config/konsolerc" not writable. [08:39] Please contact your system administrator." what went wrong? [08:40] ma hats gonna be some work :( [08:40] anyways thanks guys [08:40] adios all [08:40] thanks [08:40] anyway.. how can I add new resolution ?? [08:41] just installed a new PC with my old monitor and it only avails up to 800x600.. i wish at least a 1024x768 [08:41] how can I add screen resolutions? [08:41] xorg-openchrome is properly installed [08:41] update your driver and it should be available [08:42] if not edit xorg.conf and add the new resolutions [08:42] take a look at existing resolutions to see how its done [08:45] Hellow, dear friends! please, help me with route tables in /etc/network/interfaces [08:46] hi, please anybody here with a macbook? i 'm having troubles installing the b43 module. The new wl one won't let me monitor, so i need b43 [08:46] tred: you will need to run: sudo chown -R $USER /home/$USER to assign the old data to your new user [08:46] ok, thx [08:46] how do i stop xchat from loading on startup? [08:47] hi [08:47] hsarci: take it out of the startup item list in system -> prefs -> startup apps, in the same dialogue you should tell your sysem to not remember the running apps from the session [08:49] 우아~ [08:49] +ㅁ+ [08:50] jedis sind hier also auch unterwegs ^^ [08:50] can I convert reiserfs format 3.5 to 3.6 without re-formatting the disk? [08:53] hi i have a question, after i did sudo mkfs.ext3 /dev/sdb1 what do i do next to format? [08:53] i apparently dont know the proper syntax for chown, am newbie, i get this [08:53] tred@kubuntu904:~$ sudo chown -R $tred /home/$tred [08:53] chown: missing operand after `/home/' [08:54] tred, is the username really $tred? [08:54] tred: tred, not $tred [08:54] action, thanks [08:54] ok, i see. thx [08:55] Lately my machine's network connection breaks down, on reboot DHCP fails, but dhclient from the command line works. Any hints on where to investigate? [08:55] O__o, nothing else, it's formatted [08:55] action, im on kde so i think ur directions dont apply [08:55] can I convert reiserfs format 3.5 to 3.6 without re-formatting the disk? [08:56] hsarci: np man, i personally only put symlinks in ~/.config/autostart for the stuff i want starting and leave that gu thing alone [08:56] thanks evetyone, chown seems to have fixed everything up nicely [08:57] hsarci: kde has ~/.kde/Autostart you can put anything in there and it will run at logon [08:57] action, thanks a lot [08:57] hsarci: you can use tab after typing action too, complees the name [08:57] ;) [08:57] trying registered nick [08:57] i know that [08:58] lol [08:58] too bad theres nothing in that folder... [08:58] so i still dont see how to disable xchat [08:58] lemme google [08:58] lol [08:58] suigeneris, how to automount a drive? [08:58] hsarci: hmm, then i'm unsure of anywhere else, could ask in #kubuntu too [08:58] hey, i connected using my reg nick without password, why did the server let me in? [08:59] its just the server list that opens [08:59] ooohi ActionParsnip [08:59] this nick is registered by me , why can i enter without password? [08:59] maybe its because im not closing out of xchat before i restart? === decomp is now known as decomp_away [08:59] Any idea why "lame" in jaunty could be generating gargabage from a CD conversion? [08:59] obiwan please what server you talking about [08:59] this irc.freenode.org [09:00] o got this nick and [09:00] this one registered [09:00] xD [09:00] good morning UBUNTU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! [09:00] obiwan__: #freenode is the channel for questions about freenode [09:00] good morning :) [09:00] you dont need a pass for it [09:00] thanks lstarnes ! wow there's a channel 4 everything hehhh [09:00] obiwan_: you can set your client to identify automatically [09:00] Im gentoo user, but I go on ubuntu xD [09:00] O__o, edit /etc/fstab [09:01] i got a problem who wants to help me, not all together [09:01] yeah sure, just spill the beans agent538 === flashkidd_ is now known as flashkidd [09:01] yeah, but i said: let's try to use my reged nick without entering password, and the server tells me it's registered, but it lets me in anyway [09:01] no digital sound from my asus p5k-e motherboard [09:02] obinwa___ <----look at your name, it's underscored. [09:02] obiwan what client are you using [09:02] i've got 9.04 running on a thinkpad r51. the volume seems to jump quit a bit when i'm using the thinkpad volume buttons. i would like to try an even this out. [09:02] but i can selecht the dsigital sound in the aplet from de mixer [09:02] yeah, i registered both obiwan_ & obiwan__ [09:02] i use the ubuntu 9.10 karmic 64 bit version === c00w-cRr is now known as niezsa [09:03] !karmic | agent538 [09:03] agent538: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [09:03] my updatemanger does not work anymore so i do through termanal [09:04] has anyone seen such before [09:04] pradeep: error? [09:04] pradeep: yah it wont work [09:05] pradeep: i mean,, what erros you have [09:05] pradeep: i only use terminal for updates, update manager takes too long [09:05] indus do you have such error too [09:05] question: my firefox sometimes crashes for no apparent reason, usually when I have not used it for some time. is there a way to try find out what caused the crash (some sort of stack trace/core dump/something?) [09:05] really i can manage terminal but was only wondering why [09:05] TheKro: run firefox from terminal, when it crashes read what is in the terminal [09:06] suigeneris, so /dev/sdb1 /media/hd37gb default 0 0 ? [09:06] pradeep: can you please post the error from the gui? [09:06] suigeneris, or 0 2 ? [09:06] Thanks, ActionParsnip - will give that a try. [09:06] O__o, I don't know about the numbers [09:07] can I convert reiserfs format 3.5 to 3.6 without re-formatting the disk? [09:07] i have a umts stick (webn walk stick) under ubuntu linux. the stick is getting very warm. can the stick be damaged? [09:07] no error [09:07] just numb [09:08] pradeep: then its hard to help [09:08] O__o: 0 2, probably. see man fstab for an explanation [09:08] so i update via terminal [09:08] prince_jammys, the man fstab is too hard to understand [09:08] O__o: 0 2 [09:08] what 0 0 mean? and what 0 2 mean? [09:09] thnx for the info ActionParsnip [09:09] O__o: do you know what fsck is? [09:09] and should i just use /dev/sdb1 or the UUID? [09:09] 0__o you have to be careful when editing your fstab ok [09:09] suigeneris: http://ole.tange.dk/linux/problemer/linux-problemer.html [09:11] anyone here speak french [09:11] Jimi_Neutral: /join #ubuntu-fr [09:11] well i need something translated [09:11] this is the ubuntu support channel [09:11] Jimi_Neutral: dict.leo or google [09:12] !ubuntu mobile [09:12] Sorry, I don't know anything about ubuntu mobile [09:12] !mobile [09:12] Learn more about Ubuntu Mobile at https://wiki.ubuntu.com/MobileAndEmbedded [09:12] online translators are crap no opffnse ice [09:13] Wally1, :D [09:13] Jimi_Neutral: some are ok if you skim read the translation, yu can fill in the gaps [09:13] Jimi_Neutral: as said before, this is the ubuntu-support-channel [09:13] ActionParsnip, i tried but it was tital nonsense [09:14] i know ice, it was just on the offchance, aint exactly busy is it [09:14] !tab | Jimi_Neutral [09:14] Jimi_Neutral: You can use your key for autocompletion of nicknames in IRC, as well as for completion of filenames and programs on the command line. [09:14] morning [09:14] any "ubuntu + virtualbox + windows + photoshop" users around? :-) [09:15] i just upgraded from 9.04 to 9.10 (kubuntu) and the gui was working great before the upgrade (i had to install with no acpi becuase of intel chipset) so i came here and was told to do sudo aptitude update and sudo aptitude safe-upgrade, did that, rebooted and still get a black screen after the 'kubuntu' load [09:15] iksik, i "ubuntu + virtualbox + windows" [09:15] iksik: yes, in #ubuntu, #windows, #photoshop and #vbox :) [09:15] !karmic | matyd [09:15] matyd: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [09:15] iceroot funny ;< [09:16] thanks ice [09:16] iksik: why use virtual box? i heard photoshop cs2 has a gold rating in ubuntu 9.04 [09:16] hmmm [09:16] is there a way i can 'downgrade' from command line? [09:16] Jyxt with wine? [09:16] photoshop doesnt work in wine === obiwan_ is now known as Guest61146 [09:16] iksik: what about asking the real question and then we can see if #ubuntu is the right place [09:16] it wont install [09:16] O__o: its working [09:16] !wfm [09:17] Common Sense: Just because you can, does not mean you should (and especially recommend to others). Think before you do. "Works for me" does not mean it is ok. The latest version of everything is not always useful if you aim for stability. Please see http://geekosophical.net/random/worksforme/ [09:17] O__o: because of photoshop, wine is called 1.x instead of 0.x [09:17] GIMP ftw ^^ [09:17] It works for some people. [09:17] MenZa: read the appdb [09:17] the photoshop i was trying to install dont work [09:17] iksik: http://appdb.winehq.org/objectManager.php?sClass=version&iId=2631 [09:17] iceroot: Hence the 'it works for some people' === Guest61146 is now known as obiwan_fffffffd [09:17] amusingly, the ubuntu+photoshop question has yet to be asked. [09:17] Also, the latest versions (CS3, CS4) do not work for any, iirc. [09:17] O__o: not all apps work in wine [09:18] hence vitualbox + windows is the best solution and easiest [09:18] O__o: you may get more luck with cedega or crossoveroffice but both are not free [09:18] cedega is just wine with paid support [09:18] or crossover is, i cant remember...one of those is just wine with paid support [09:19] O__o: but with a vbox you need a license, if the systems main use is photoshop, you may as well use widows [09:19] Help me!! I just got sent a photoshop file that won't open in GIMP! [09:19] hey my wireless card seems to be broken (can't detect any wireless networks), how can I test further? [09:19] what license? [09:19] O__o: for the windows you install in vbox [09:19] how hard to get a copy? [09:19] halberd: sudo lshw -C network will show you what chip it has [09:20] O__o: easy, go online or head to the shop, buy one [09:20] i have tons of windows license [09:20] ok ActionParsnip but how do I diagnose the problem [09:20] it's a broadcom 4312 [09:21] 802.11b/g [09:21] !roadcom | halberd [09:21] Sorry, I don't know anything about roadcom [09:21] !broadcom [09:21] Help with Broadcom bcm43xx can be found at https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx [09:22] ubottu: botsnack [09:22] Yum! Err, I mean, APT! [09:22] wouldnt it be great f we could pick up the broadcom hq building and catapult it at apples hq building [09:23] fire it with a missile launcher at ATI [09:23] trying to squash a myth here - does windows run faster/more efficiently inside ubuntu (vbox) than on it's own? [09:23] xmnt: most likely not :P [09:23] that would be comical. [09:24] xmnt: i'd say slower due to virtualised hardware [09:24] hey i heard something like it is possible to install mac on intell hp,dell toshiba etc [09:24] ActionParsnip, that was my argument as well [09:24] xmnt: virtual machines impose a nontrivial overhead in most cases. [09:24] pradeep: yes but it violates the license [09:24] ok [09:25] i love opensorce [09:25] pleae can anyone recommend a good backtool [09:25] I've used update-manager -d to upgrade to latest dev release from 9.04. How can I have it upgrade until 9.10 final is out. I don't wish to always be in dev releases [09:25] for linux servers [09:26] !backup [09:26] There are many ways to back your system up. Here's a few: https://help.ubuntu.com/community/BackupYourSystem , https://help.ubuntu.com/community/DuplicityBackupHowto , https://wiki.ubuntu.com/HomeUserBackup , https://help.ubuntu.com/community/MondoMindi - See also !sbackup and !cloning [09:27] csarven: it uses the same repos, when the rc comes out you will upgrade (slowly) to the rc without need for any extra effort [09:27] csarven: 9.10 questions should be asked in #ubuntu+1 until its released, but to answer your question, you'll get updates between now and final release which will bring your system up to the final release automatically [09:28] Great. Thanks! [09:30] see you guys later got a clas to catch up with [09:31] ba back in a bit === obiwan_fffffffd is now known as obiwan_ [09:31] I am not totaly noob with networking but this is driving me crazy. I am traing to configure my /etc/network/interfaces and first problem is when I /etc(init.d/networks restart it is not refresing settings for first time, sometimes I hav to tipe it 2-3 times [09:32] damjan__: its /etc/init.d/networking restart not networks === train is now known as sleepy_train [09:36] If smbdy answerd to my question plz repost === vox_ is now known as vox [09:36] damjan__: its /etc/init.d/networking restart not networks [09:40] Hi, I have been having some problems with my resoultion after I installed a new graphics driver in ubuntu. When ubuntu boots up I only get a black screen with the ubuntu logo in strange colors. I've tried to run sudo dpkg-reconfigure -phigh xserver-xorg, but it does not help. Does anyone have any ideas? === spartan is now known as Guest93863 [09:43] jontore: What's your graphics chipset? [09:44] jontore: Is the resolution all right in the GUI? [09:44] mo0nykit: Nvidia I think [09:45] in a terminal "lspci | grep VGA" [09:45] jontore: what do you get? [09:47] mo0nykit; it says it is a ATI card apperntly, strange in windows I use a nvidia driver :) [09:47] For a laptop, or even in general, which company's graphics card works best on Linux / Ubuntu? [09:47] Intel AMD or nVidia? [09:48] jontore: strange indeed. what graphic driver did you install? how did you install it? [09:48] mo0nykit: I installed a ATI graphics driver proposed by the HW manager [09:48] harisund: from I read, Intel 9xxGM chipsets are aheadache [09:48] i have found intels work best but they are crap for anything more intense than guld wars or wow [09:49] harisund: how quickly can you sau nvidia [09:49] jontore: HW manager, you mean System --> Administration --> Hardware Drivers? [09:49] mo0nykit: yeah even I keep hearing Intel 9xx sucks .. I have a 915GM and I can't get even Windows drivers lol [09:49] mo0nykit: jeppz [09:49] JasseT: hmm thanks .. that's good to know :-) nVidia it will be I guess [09:50] hi. I'm trying to install ATI drivers on jaunty 9.04. I followed these instructions and they were a disaster: https://help.ubuntu.com/community/BinaryDriverHowto/ATI . I googled and I didn't find anything useful. Any suggestion? All worked fine for 8.10, but with 9.04 these drivers are a nightmare..... [09:50] harisund: I also heard that the Intel 9xx cards aren't natively Intel. It's a company they bought out. Now Intel's doing a new GPU to compete with Nvidia's Tesla line. [09:51] jontore: okay, is the resolution pretty in the GUI? [09:51] mo0nykit: cool man, good to know [09:51] harisund: yeah well at least for me nvidia's never given any trouble [09:51] lab: what kind of disaster? [09:52] mo0nykit: sry it is a ATI card I checked with another computer right now, I never get past the bootup splash so I don't now [09:52] mo0nykit: the instructions are messed up and they show an unacceptable procedure [09:53] JasseT: Nvidia gave me some trouble with the framebuffer, too :P I had to manually configure menu.lst with vga=792 [09:53] jontore: all right, access the grub menu (press ESC to access the grub menu), the choose recovery mode [09:53] they should be removed from ubunt's website. And I don't know how to install these fuck%&/&% drivers [09:54] I get sound chopping with ubuntu 904 [09:54] what is the pulsaudio disable switch [09:54] mo0nykit: yes but you see that's why we love using linux, it never quite perfectly works :) [09:54] they corrupted my installation... [09:54] i want alsa [09:54] lab: what do you mean 'corrupted'? can't boot? no GUI? === michiel_ is now known as Guest76663 [09:55] JasseT: haha yeah quite true :) are you in recovery mode yet? [09:55] mo0nykit: please, thrust on me. they are not valid instructions [09:55] mo0nykit: booted up and ready to go :) [09:56] JasseT: oops.. I meant that for jontore :P sorry.. J-- nicknames.. hehe.. [09:56] jontore: look for the xfix option. Choose that. It will automatically configure your xorg.conf (GUI configuration file) to the failsafe version [09:57] ? [09:57] mo0nykit: and then choose resume ? I actually tried this earlier, no sucess [09:58] hi jontore [09:58] just wonder, since when you install the OS? [09:59] anyone know how to get webcam flipped right side up? === saulus is now known as SauLus [09:59] any important data there? [09:59] jontore: oh.. XD. I think I'm at a brick wall. I've had experience with Nvidia. Just tried to help, it could be related.. [10:00] i ran "sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd" then tried to run "sudo dhcpd restart" and it returned "sudo: dhcpd: command not found"... why would this be? [10:00] firdau5: a couple of months ago, I guess there is not too much important data there most of it is in my git repo [10:00] azlon: I think it is something like sudo service dhcpd restart [10:01] jontore : so, earlier the problem not occurs, right? [10:01] lab: Did you do this? sudo insmod /lib/modules/`uname -r`/volatile/fglrx.ko (I'm assuming you're using 9.04) [10:01] mo0nykit: Thank you anyway, the quickest solution is to reinstall the Os you think [10:01] harisund, http://pastebin.com/d73ec59a2 [10:01] mo0nykit: you don't thrust me [10:01] :) [10:01] firdau5: nope just to day when i fooler around with a new driver and xorg.conf [10:02] jontore: np :) yeah that's the quickest one :P [10:02] azlon: that I do not know .. can you post the contents or the last few lines of syslog? [10:02] harisund, of dmesg? [10:02] no syslog .. I think it's somewhere in /var/log/syslog or something like that [10:02] jontore: some advice: After a fresh install AND update, look at System --> Administration --> Hardware Drivers. That's the first place to go :) [10:03] I got same problem before, when I wrongly configure the menu.lst [10:03] lab: It would be helpful to establish at what point you are in your trouble :) so we'll know where we can start [10:03] harisund, this is the last few lines of my dmesg: http://pastebin.com/d3ed43e59 [10:04] I solved it by reinstalling the OS.. [10:04] mo0nykit: it's very simple. As said before, the guide is nonsense. so, there's no "at what point". I have to start from a valid guide [10:04] azlon: dmesg wont help, I need the last few lines of /var/log/syslog .. can you check if that file exists? [10:04] from scratch [10:05] mo0nykit: the guide firstly gives instructions and soon after says "these instructions are not valid" (!!!!!!!!). Then it shows a link with a horrible procedure [10:06] harisund, http://pastebin.com/d489c67c6 [10:06] lab: So you're willing to reinstall? That could be the easiest way to get out of trouble. Then after a fresh install AND update, take a look at System --> Administration --> Hardware Drivers. That's the first place to go :) [10:06] mo0nykit: you think I'm a dummy idiot [10:06] azlon: have you setup a DHCP server before? [10:06] azlon: you have not setup the DHCP server correctly [10:06] hi [10:06] harisund, no, i am following the tutorial on http://ubuntuguide.org/wiki/Ubuntu:Jaunty#Internet_connection_sharing_.28DHCP_server.29 === root is now known as Guest21816 [10:07] lab: Yeah indeed. Some of the community wikis are out-of-date and potentially dangerous. So what I'd do is gather information from lots of HOWTO's and make my own procedure. [10:08] mo0nykit: it's really fair that the wiki is shitty. I asked for something else, therefore. [10:08] azlon: ugh I hate "tutorials" like that which blindly tell you to follow a few instructions, and the user then has absolutely no clue what he is doing and .. let me see, give me a few minutes [10:08] lab: You want help or not? All kinds of help offered in the Ubuntu community are preferred to be delivered in "newbie" form. To benefit everyone [10:08] ATI has a a wiki too, with some directions for ubuntu. [10:09] mo0nykit: I want help, but you can't give me help. it's a really specific problem that requires experience on it. You don't have it [10:09] this is not a "newbie" help. [10:10] when i go to places->bookmarks->myfolder then dolphin opens instead of nautilus [10:10] hayy [10:10] harisund, i tried following the steps from !ics pages but they never work with my ppp connection. I am trying to share a 3G connection to my other machines [10:10] lab: well the, help your conceited self [10:10] mo0nykit: ? [10:11] azlon: I will show you another link - It's from another Linux hang on [10:11] ubantards [10:11] lab: you don't deserve any help if you don't appreciate ANY help offered [10:11] azlon: http://www.gentoo.org/doc/en/home-router-howto.xml Check this out. This is Gentoo's documentation, so obviously top notch .. you should find this clearer, well written and easier to follow [10:12] mo0nykit: I give help only when I can. Otherewise I would make other people wasting their time. [10:12] lab: Leads could be helpful at least [10:12] lanoxx: are you using kde? [10:12] mount probelm ....... [10:12] harisund, thanks, should i uninstall dhcpd-server? [10:12] mount ? [10:12] h [10:12] azlon: yes, if all you are doing is sharing one computer's internt to a few other computers, you can use dnsmasq .. [10:12] *hi [10:12] azlon: it integrates DHCP and DNS, making it all the more easier [10:12] lab: Leads that could help you know what keywords to Google [10:13] harisund, what is the command to remove? sudo apt-get remove dhcpd-server? [10:13] mo0nykit: as said at the beginning, I already googled [10:13] yeah that should do it [10:13] azlon: also makes web browsing a little faster due to dns succeeding on the local system [10:13] :) [10:13] azlon: or you can leave it in and just not started it won't affect you unless you need to reclaim that space [10:13] thanks [10:14] azlon: makes dns to 0ms rater than 32ms [10:14] (PLEASE ANSWER ONLY IF YOU KNOW THE PROBLEM AND HAVE A MINIMUM EXPERIENCE ON IT) hi. I'm trying to install ATI drivers on jaunty 9.04. I followed these instructions and they were a disaster: https://help.ubuntu.com/community/BinaryDriverHowto/ATI . I googled and I didn't find anything useful. Any suggestion? All worked fine for 8.10, but with 9.04 these drivers are a nightmare..... [10:14] ActionParsnip, aahh... nice [10:15] answer what? [10:15] azlon: http://sandeep.co.in/2008/01/09/dnsmasq-browse-the-web-faster/ [10:15] my screensaver is set to go off after 8 min of inactivity and lock the screen but it's not going off anymore. any idea why it'd stop? [10:15] lab: have a look at ATI's official site. They probably have the answer [10:15] lab: you didnt say what ATi card you are installing [10:15] infidel2s: check if the screensaver is running .. are you familiar with the terminal ? You could do "ps ax | grep screensaver" [10:15] mo0nykit: already done. [10:16] i can't answer, because you don't have the MINIMUM EXPERIENCE required to ask a detailed question. [10:16] ActionParsnip: it's a radeon X... card [10:16] prince_jammys: I second the motion [10:16] prince_jammys: shut up your ass [10:16] i am running 9.04 on a thinkpad r51 and have a problem with the volume jumping. the volume keys only change the hardware volume and not the software volume and because of this the osd also doenst work. [10:16] lab: there are many in that range, again you have given little detail [10:16] lab: lspci | grep -i vga [10:16] lab: learn to ask questions, and welcome to /ignore. [10:16] lab: without that, nobody can advise properly [10:17] ActionParsnip: I can't do it now. I'm re-installing the OS [10:17] lab: in live desktop? [10:17] hello ubantrads [10:17] any know of a USB wifi device that works in monitor mode? [10:17] ActionParsnip: anyway, it's a common X series card. fully supported in ubuntu 8.10 [10:17] lab: please state the exact problem, but if you have issues i suggest you try with envyng-gtk from synaptic [10:17] lab: doesnt matter, still need the model for precise support [10:17] ActionParsnip, no gnome [10:17] indus: already tried with envyng [10:18] ActionParsnip: no. It doesn't matter the model. The most important thing now is finding a MINIMUM support for ATI+jaunty === yufei_ is now known as yufei [10:18] lab: you didnt state whether you are using the open source radeon driver or the fglrx one [10:18] indus: fglrx [10:18] lab: it is, thats why when you websearch for uides the exact card is critical to gettikng exact guides [10:19] better: i tried to install it, but there's no way, neither a procedure to follow [10:19] ActionParsnip: again. no, no, no, no and no. [10:19] lanoxx: do you use the dolphin file browser anymore? [10:19] ActionParsnip: I need a basic guid for jaunty+ati [10:19] nothing else [10:20] lab: if you can get me the card i'll get you a guide [10:20] indus bhia namaste [10:20] lab: basic guide is !ati [10:20] ActionParsnip: [10:20] lab: if you get the card model then i can advise [10:20] ActionParsnip: I'll give it to you as soon as the OS is ready [10:20] lab: during the installer you can still press alt+f2 (assuming you are using the desktop live cd) and run a terminal [10:21] it wont break anything === decomp_away is now known as decomp [10:21] someone sold GIMP on eBay for $5 and my uncle didnt know GIMP is free so he bought it. :) [10:22] kbp: you can sell a USB stick with gimp on it, technically a service [10:22] ActionParsnip: Radeon X1200 [10:22] lab: not so hard is it [10:23] ActionParsnip: I'm pretty sure you will make a hole in the water, starting from that. [10:23] ActionParsnip, no, i dont really want to use it, it just started to open like this and i want nautilus back [10:24] lanoxx: uninstall dolphin then and install nautilus [10:24] lanoxx: system cant use whats not installed :) [10:24] All...I am running Ubuntu 9.04 and can't mount any of my Fat32 partitions. I receive "Can't find a valid FAT filesystem on dev sdd1" when trying to do. Has anyone see this? Thanks in advance [10:24] hello hello mount drive in linux problem [10:24] i looking for a program, that modifies screenshots with arcs oder something like that. for example making a user guide [10:25] I suspect there's a bug in jaunty, for these drivers [10:26] ActionParsnip: really? I thought it's illegal when selling a free/gnu software. If it's legal then someone just copy and sell Ubuntu CD and make profit... not fair for the buyers [10:26] kbp i am pretty sure you are free to burn Ubuntu CDs and sell them for a price [10:26] how do i remove packages and all the packages that they depend on using apt? [10:26] lab: http://swiss.ubuntuforums.org/showthread.php?t=1287329 [10:27] kbp what you will be doing is charging them for the "CD and the act of putting it on the CD" , but not for Ubuntu itself [10:27] well...the software itself might be licenced under GNU etc [10:27] but the CD itself is not licenced..w.hats to stop you from burning CD's and charging $10 for the physical CD? [10:27] ActionParsnip: this is not an useful link [10:27] kbp: its very easy to show criminal intent if that is done, technically nothing illegal but morally yes [10:27] lab: basically you will need to use the open driver, so it kinda is [10:28] harisund, im following that tutorial and it is telling me to edit /etc/conf.d/net and setup my eth0 but /etc/conf.d/net doesn't exist. i tried to sudo touch it but it didnt work. i am already connected to the lan via network manager, can i just set those same settings in network manager? [10:28] $10 for a cd yea right [10:28] kbp: technicaly he's not selling the software (whic is illegal as its not the dudes property) he can charge for a usb stick and postage and put all manner of data on the stick that your dad expects but is not being directly charged for [10:28] azlon: hang on one sec [10:28] does anyone know to intelligently remove a package and all the packaes that were intalled when i installed it === booty_kernel is now known as booting_kernel [10:28] ? [10:28] indus: people the world over have been paying more than that for years [10:28] average music CD is like $15 [10:28] Jyxt: off topic [10:28] kbp: if its 10 USD for a CD i'd be a bit wary and alert the various dev teams [10:28] glick, sudo apt-get purge [10:29] glick: sudo apt-get purge [10:29] is there any quality diminishes when using a dvi adapter to svideo? [10:29] azlon: yeah that is only if you are setting up your connection through the command line. But your connection is already setup through NetworkManager [10:29] is it autoremove? [10:29] glick: sudo apt-get --purge remove packagename; sudo apt-get --purge autoremove [10:29] harisund, thanks [10:29] glick, then sometimes sudo apt-get autoremove [10:29] ActionParsnip: by default jaunty should already use these drivers. [10:29] azlon: You can actually ignore the section 3. Hug the WAN (The internet) part [10:30] glick, autoremove will only remove packages that are not being used by anything [10:30] harisund, yeah, i browsed through it but decided to skip it. i just dont want to skip something important and cause headaches later [10:30] lab: possibly, it may default to vesa ut you can define it in xorg.conf as well as resolutions and refresh rates if your monitor does not report what it can do [10:30] ActionParsnip: as said at the beginning: my question require direct experience on the problem. I appreciate your help, really. But it's unuseful if you don't know how to specifically solve [10:30] azlon: yeah and I will be online for a while, let me know if you are able to get it to work [10:30] harisund, thanks! [10:30] lab: if yo want help that specific you will be searching a lifetime [10:31] lab: it simply wont exist [10:31] ActionParsnip: not necessarily. because other people could have occoured the same problem [10:31] my question was addressed to them [10:31] lab: you are going to have to wrestle with xorg.conf and the open drivers until you get something decent [10:31] lab: log a bug too [10:32] ActionParsnip: yes, it's a bug. This is a good suggestion [10:32] lab: i suggest a forum search [10:32] harisund, is emerge the same as sudo apt-get install? [10:32] lab: lots of posts there [10:32] azlon: yeah more or less .. which software are you looking at? [10:32] indus: and lot of wasted time [10:32] im using Ubuntu 9.04 but the tutorial uses emerge [10:32] the best thing is to find a person who solved the same problem [10:32] lab: http://packages.ubuntu.com/jaunty/x11/xserver-xorg-video-radeonhd [10:32] lab: you did it already? [10:32] azlon: yeah emerge is the apt-get of Gentoo [10:33] ah, ok [10:33] lab: supports your chip [10:33] the WORST thing is following instructions of people that did not encountered the problem [10:33] lab: you didnt even state your model, you didnt say what teh error is [10:33] indus: x1200 [10:33] how will anyone here know your problem [10:33] indus: ati consider it legacy now [10:33] azlon: is eth1 your internet connection too? [10:33] aah huhuh x1200 its legacy baby [10:33] indus: I specified that there's no way to START to install the driver... please don't bother [10:33] only the open source driver will work now [10:34] harisund, eth1 is my LAN, ppp0 is my internet [10:34] indus: basically because its old ati drop it like its something contagious, ati suck [10:34] azlon: ah ok then ppp0 will be your "WAN" everywhere .. though I guess you already got that [10:34] indus: but people buy their shoddy wares, go figure [10:34] Okay, this is aggrevating... Running 9.04 and even using the uni/multiverse repos, bitchx is still invisible [10:34] ActionParsnip: they dont suck, [10:34] ActionParsnip: superb cards, its a linux poiunt of view [10:34] i'd say they do lots [10:35] indus: i'd always buy nvidia, even in a windows system [10:35] ActionParsnip: their drivers are as abad as ati now [10:35] ActionParsnip: time has changed [10:35] never had a single issue with anything i have ever bought from nvidia [10:35] hi, isn't update-grub supposed to check for other linuxes in other partitions and hard drives? [10:36] boknoy: in karmic? [10:36] jaunty [10:36] harisund, "rc-update add dnsmasq default" = "rc-update: command not found" [10:36] I have another linux on a different patition, and it's not picking it up [10:36] boknoy: have you read the reinstall grunb factoid? [10:36] azlon: Ok, I think that allows you to start dnsmasq when you reboot [10:37] azlon: i think that should be happening by default on your box [10:37] nope, haven't heard of that [10:37] harisund, ok cool [10:37] so you mean to say I need to manually write menu.lst everytime the other linux updates the kernel? [10:37] anyway,open source drivers don't work [10:38] boknoy: no, read this: [10:38] !grub | boknoy [10:38] boknoy: GRUB is the default Ubuntu boot manager. Lost GRUB after installing Windows? See https://help.ubuntu.com/community/RestoreGrub - GRUB how-tos: https://help.ubuntu.com/community/GrubHowto [10:38] harisund, sorry to ask about every single line in the tutorial, but it looks like my dchp3-server is causing problems: http://pastebin.com/d71736fe8 [10:38] Hi, in CLI. How can I get the total of all files starting with "internal" ? [10:38] having problem in connecting to net ?? [10:38] boknoy: the grub should update itsefl as you add kernels [10:39] total size [10:39] yeah, but it's not [10:39] harisund, i went ahead and removed dhcp3-server but i still get the error [10:39] azlon: no probs man .. hmm can you paste the output of /var/log/syslog again? [10:39] ActionParsnip, grub-update only reflects the Ubuntu kernels [10:39] how to connect adsl2 modem , running mtnl triband to net on ubuntu 8.04?? [10:40] sabayonuser: hello [10:40] harisund, http://pastebin.com/d7df764d3 [10:40] hello all [10:40] azlon: that apparently happens because some other software is using the port, like bind or something so let's see what we can do [10:40] harisund, there are 2 errors at the end, one is that i forgot to put sudo, but the second is with sudo [10:40] can any one help me?? [10:40] sabayonuser: its mtnl automatic always on connection? [10:41] Wazzzaaa: let me see if i can find something. Have you asked in #bash? [10:41] indus yes, and funnily i am connected through a live sabayon cd [10:41] azlon: Did you install any DNS server earlier? Like bind? [10:41] ActionParsnip: no... [10:41] I can go to there [10:41] sabayonuser: same , just make surer all is connected [10:41] man.. sabayon kicks butt [10:41] sabayonuser: no extra steps needed [10:41] harisund, nope [10:41] azlon, is dnsmasq already running? [10:42] sabayonuser: if live cd works, why wont regular install work [10:42] mechdave, hold on [10:42] I know its possible with some kind of awk script, but I don't know if it is possible in some other manner. in combination with du maybe ? [10:42] azlon: yes mechdave good call .. try doing /etc/init.d/dnsmasq stop and then start again or sudo /etc/init.d/dnsmasq restart [10:42] mechdave, how can i check [10:42] azlon: you could do ps ax | grep dnsmasq [10:42] i am connected to net via live cd of sabayon not ubuntu [10:42] Wazzzaaa: yeah that and have a variable with a running total, adding the du output colomn for the size to the total [10:43] ubuntu live or installed , nothing works [10:43] azlon: there are ways to check what application is listening on what port but that skips me right now.. something like netstat or somethign [10:43] harisund, same error when i restart [10:43] harisund, azlon or you could do this --> sudo /etc/init.d/dnsmasq restart [10:43] mechdave, dnsmasq: failed to create listening socket: Address already in use [10:43] hi. /set theme darkstyle.theme [10:43] mechdave: he just tried that and same thing happened .. what I am thinking of is trying to figure out which address is in use [10:44] azlon, what port is dnsmasq configured on? [10:44] thank you for now ActionParsnip. [10:44] Wazzzaaa: #bash will help lots [10:44] azlon: dhcp3-server is fully stopped and removed right? ps ax | grep dhcp reveals anything? [10:44] in sabayon all i need to input is eth add , ip add subnet nmask , default gateway and dns , and lo i am connected to net even through a live cd, but cant do the same in ubuntu ,,why???? [10:44] yeah [10:45] azlon, you could nmap your box to find all open/listening ports [10:45] harisund, http://pastebin.com/d1b6feabf [10:45] mechdave, install nmap now === eli__ is now known as Elirips [10:46] *installing [10:46] azlon let me check one sec [10:46] THANKS A LOT FOR NOT HELPING ME TO U ALL [10:46] hello everybody. does anyone know why karmic koala release candidate is shipped with a vanilla kernel? [10:46] tahnks [10:47] marcriera, you could try in #ubuntu+1 [10:47] sabayonuser: you have any passowrd for mtnl? [10:48] or, i'll try on ubuntu+1. (is this a kind of users vs developers chanel diference?) [10:48] i have the numbe rand password [10:48] sabayonuser: in sabayon what steps did you do to connect? [10:48] pppoeconf says nothing found [10:49] marcriera, not really, just ubuntu+1 handles the development version of ubuntu [10:49] harisund, netstat -anlp | grep -w LISTEN [10:49] anything on port 53? [10:49] clicked a button to make a new connection entered my ip subnet gateway ,mac and dns [10:49] azlon: ah thanks I knew there was a netstat [10:50] harisund, yeah, 2 things on 53 but it doesnt say the app name [10:50] harisund, http://pastebin.com/d6f374daf [10:50] azlon: damn we need to find out what those apps are.. because dnsmasq tries to listen on port 53 as well [10:51] harisund, looks like bind is installed... how can i kill the process? [10:52] ah thought as much [10:52] ps ax | grep bind? [10:52] (PLEASE ANSWER ONLY IF YOU KNOW THE PROBLEM AND HAVE A MINIMUM EXPERIENCE ON IT) hi. I'm trying to install ATI drivers on jaunty 9.04. I followed these instructions and they were a disaster: https://help.ubuntu.com/community/BinaryDriverHowto/ATI . I googled and I didn't find anything useful. Any suggestion? All worked fine for 8.10, but with 9.04 these drivers are a nightmare..... [10:52] azlon I am guessing bind would have got installed as a part of dhcp3-server or something like that. Or there might be a service in /etc/init.d/ .. something like /etc/init.d/bind or something like that [10:53] lab people here work for free on their own time. If you are unable to get help right now, I would suggest posting on the forums or perhaps coming back at another time [10:53] mechdave: thanks. they made me go to #ubuntu-kernel . i didn't realise that was so evident. :) thanks [10:53] her marcriera quick question [10:53] marcriera, no worries [10:53] how to use cp -r without .svn? [10:54] harisund, azlon port 53 is used for DNS only according to IANA [10:54] lab: http://support.amd.com/us/gpudownload/linux/legacy/Pages/radeon_linux.aspx?type=2.4.1&product=2.4.1.3.22&lang=English [10:54] mechdave yes, dnsmasq provides dns services too, so if there is another software running that provides dns service, there's a clash which is why dnsmasq is not able to start [10:54] harisund, should i just uninstall bind? [10:55] mechdave: and also rfc 1035: http://www.faqs.org/rfcs/rfc1035.html [10:55] azlon: yeah i am pretty sure you should be fine uninstalling bind. But in any case, is it a stoppable service in /etc/init.d/? [10:55] harisund, mechdave, i was reading this page and it says to just reconfigure bind, but i dont think i need bind do i? http://tjworld.net/wiki/Linux/DnsMasqAddressAlreadyInUse [10:55] azlon: I am not in front of a Ubuntu box right now, can anyone tell if bind gets installed by default on Ubuntu or is it safe to remove? [10:55] harisund, i tried sudo /etc/init.d/bind stop and it didnt work [10:55] azlon: maybe it is not bind, could it be named? [10:56] harisund: safe to remove [10:56] k azlon go ahead and remove, and if your machine breaks down say it's all indus fault :) [10:56] harisund, removed [10:56] harisund, now let me try to start dnsmasq again [10:56] anyway thanks indus .. and azlon what named does, dnsmasq does too so it should be safe to remove it [10:57] harisund, still the same error, should i restart? [10:57] i think every one here are too busy anser my question :-) [10:57] i just answered question as to whether its part of default install and its obviously not, its used to set up DNS etc, bind is a common software [10:57] do the netstat thing again and see 53 is still used? (On Linux, as far as possible I try not to use the Windows solution of restarting) [10:58] thanks indus that's what I wanted to know :) [10:58] sabayonuser: Either that, or no one knows the answer. [10:58] ActionParsnip: flash is working better (but not perfect) on amd64 :) [10:58] harisund: but maybe ubuntu server edition it is installed by default [10:58] indus: logical . yeah .. [10:59] other than this info, iam a supernoob of networking [10:59] harisund, yeah, 53 is still used on localhost and 94.128.13.252 [10:59] harisund, azlon is bind running as named? Have a look in /etc/init.d/ for named [10:59] ActionParsnip, i removed dolphin now i get an error about a missing library [11:00] best flv file convertor [11:00] azlon: what package did you remove/uninstall? [11:00] mechdave, harisund, ah crap, its running as bind9 [11:00] azlon: ah ok :) [11:00] harisund, i did sudo apt-get remove bind [11:00] I tried ffmped it is giving me codec error [11:00] azlon, there you go... just stop bind for now [11:00] mechdave: azlon: i think it used to be called named or something .. not sure .. I guess it's bind9 now [11:00] how do i stop again? sudo /etc/init.d/bind9 stop? [11:00] gravity either what??? [11:00] no the service is called named [11:01] harisund, azlon I have not played with it for long time :) [11:01] software is bind [11:01] azlon: yes that might work, try it .. you have to find the service name .. do you see anything with bind9 or bind or named? [11:01] azlon, Yep that is correct === biggimat is now known as Matic`Makovec [11:02] azlon netstat -tulpn might work, or append sudo at front [11:02] harisund, mechdave, not sure what i was doing before but its stopped now [11:02] now let me start dnsmasq again [11:02] * harisund keeps fingers crossed [11:02] woohoo! [11:02] azlon, harisund you just had the wrong name :) [11:02] ok, now for the next step ;) [11:02] thanks guys [11:02] ha good luck man ! ;) [11:03] just to be clear the berkeley internet name daemon is also called named , on redhat you start with the named command [11:04] lanoxx: is the library named? [11:04] albasheers: there is no best anything in life. [11:04] azlon, harisund I recommend you just remove the startup of bind9 and not bind9 itself... to stop it starting on boot do this --> sudo update-rc.d -f bind9 remove [11:04] albasheers: best is anopinion and is not concrete [11:05] an opinion* [11:05] mechdave: no gui? also hello [11:05] azlon: yeah follow mechdave's advice, you don't really need to "uninstall" per se, you just need the service stopped [11:05] ActionParsnip: windows xp is best [11:05] G'day indus How is it going? [11:06] indus: thats your opinion, millions would agree, millions would disagree, doesnt make it any truer than me saying something else is best :) [11:06] mechdave: hi all good, long time , how r things [11:06] harisund, already removed, but i also removed from startups so i dont get errors later [11:06] azlon: k [11:07] harisund, i think i have a new problem though, when i have my eth1 and my ppp0 enabled my internet doesnt work (this is from before i started the tutorial). when i disable eth1 my internet works [11:07] harisund, i am going to test it again, i might have to reconnect [11:07] indus, you are trying to start a war? :) [11:07] azlon: ok wait let's just make sure we are going over this correctly [11:07] mechdave: thats old fashioned [11:07] harisund, ok [11:07] hello. I got some questions regarding ubuntu. I have written an application in java and i got an *.jar.. How to deploy it on Ubuntu/Linux ? which folder? on windows xp there are java exe wrappers , on Mac OS X there is the Application Bulder with wich i can turn a *jar into an app .. What to do in Linux.. ? thnx in advance [11:08] ActionParsnip: millions are on the xp side btw :) very few linux users aha :D [11:08] azlon, you may have a problem with route [11:08] azlon: you have a computer with 2 network interfaces, one ppp0 and one eth0, and I am guessing eth0 is "unused" and ppp0 is used to connect to the internet with NetworkManager, right? [11:08] darq, you need to install the sun java runtime libraries [11:08] harisund, right, ppp0 is WAN and eth1 is LAN [11:08] indus: doesnt make it truer, just means more are in agreement. For some people, even living isnt best [11:08] harisund: and without dnsmasq running the internet is fine, right? [11:09] harisund, azlon make sure default route is pointing to ppp0 [11:09] mechdave: obviously:) but my questuon was the hole deployment process of java applications on linux [11:09] indus: best is a comparison of a product to your own needs, everyones needs differ so there will never be an outright best, its a very immature ideology to bandy round (I feel) [11:09] harisund, uhmm... dnsmasq is running now and the internet is fine, but i did "sudo ifconfig eth1 down" earlier so i could get on here and try to get ics working [11:10] well, ubuntu is by far the best of the distros that are named after South African words. [11:10] azlon: it might have something to do with what mechdave said, the route thing. How are you setting up eth1? Tthe way it says in the tutorial? static IP ? [11:10] mechdave, harisund, this is my route (while eth1 is down) http://pastebin.com/d14c1f7f4 [11:10] darq, I have just always installed java and then used javac whatever.jar [11:10] iam immature its true [11:11] azlon: that is good, only ppp0 should be on your route since that is what you are using to get to the internet .. how are you setting up eth1? [11:11] harisund, correct, eth1 is static to 192.168.0.1 with subnet of 255.255.255.0 and a DNS of 192.168.0.1 [11:11] azlon, harisund and when eth1 is up? [11:11] anyways [11:11] mechdave, let me turn eth1 back up... i will have to reconnect [11:11] brb [11:11] mechdave: ??? javac is the compiler you mean java -jar whatever.jar [11:12] darq, they may have changed it, my java is 9 years old [11:12] ActionParsnip: I am trying to convert a flv file , it is giving me following error http://imagebin.org/67886 [11:12] hi, did PPA changed its signing gpg key or something? [11:12] darq, Uuummm yeah [11:13] ActionParsnip, Error -- Konqueror: There was an error loading the module Dolphin View. The diagnostics is: The shared library was not found. [11:13] albasheers: what are you converting to? [11:13] lanoxx: is nautilus set as your default browser? [11:13] nikolam: depends on the ppa [11:13] welcome back azlon :P [11:13] nikolam: why dont you get a new one if thats the problem [11:14] ActionParsnip, the whole dialoge looks like kde? I believe something in the folder handler of gnome got mixed up [11:14] ActionParsnip, not sure how do i check that? === ccooke_ is now known as ccooke [11:14] mechdave, harisund, ok... here is my route with eth1 down, then i turned it on and did ifconfig, then a route, then turned eth1 off: http://pastebin.com/d50103644 [11:15] lanoxx: did you by any chance start with kubuntu and then install gnome? [11:15] albasheers: ffmpeg -i inputfilenameheredude.flv -ab 56 -ar 22050 -b 500 -s 320x240 -vcodec xvid -acodec mp3 video.avi [11:16] ActionParsnip, no i have ubuntu installed and i never installed kubuntu or kubuntu-desktop, i only installed kile recently which is a kde app because i need it for LaTeX [11:16] harisund, also, for some reason my IP didn't update to 192.168.0.1 but i will fix that [11:16] azlon: ok so basically doing "sudo ifconfig eth1 up" makes some changes that we don't want to be made. [11:17] azlon: that could be a part of the problem - try setting the IP when you do ifconfig [11:17] azlon, harisund line 50 should read --> default 10.64.64.64 255.255.255.255 UG 0 0 0 ppp0 [11:18] azlon: something like sudo ifconfig eth1 192.168.0.1 netmask 255.255.255.0 up [11:18] ActionParsnip, where is the handler for directories in gnome? [11:18] harisund, ok i updated the IP [11:18] azlon, harisund and it should be UH and not UG [11:18] ActionParsnip, is it in ~/.somegnomefolder or somewhere in /etc/... [11:19] lanoxx: if you go into /usr/share/applications/ and read the files that have folder-handler in the name, you can see which relates to dolphin and edit it [11:19] azlon: what do you mean "updated the IP"? How did you do that? [11:19] lanoxx: make sure /usr/share/applications/nautilus-folder-handler.desktop looks ok [11:19] ActionParsnip: I am the following code after executing the command you gave me http://imagebin.org/67887 [11:19] azlon, harisund the default route is up the put [11:20] harisund, i did sudo ifconfig eth1 192.168.0.1 and it reenabled eth1 and set the ip to 192.168.0.1, but then i had to turn it off again to get back in the chat [11:20] Hi folks. Is this a good place to ask a Wireless question? [11:20] azlon what are the contents of /etc/network/interfaces? [11:20] azlon, harisund line 50 should read --> default 10.64.64.64 255.255.255.255 UH 0 0 0 ppp0 [11:20] mechdave, im not really familiar with route but should i do something like "sudo route -a 0.0.0.0 ppp0"? [11:20] ActionParsnip, http://pastebin.com/f54437ca [11:20] ActionParsnip: I mean I am getting following error after executing the command you gave me http://imagebin.org/67887 [11:20] HI , i want to connect my vpn but i get this error http://imagebin.org/67888 how can i fix this ? [11:20] albasheers: then muliply the bitrates by 1024 to get bits from kbits [11:21] indus, ppa is for Hardy/LTS [11:21] harisund, "auto lo" and "iface lo inet loopback" [11:21] ok [11:21] azlon you need to change default route to point to ppp0 instead of eth1... gimme a sec and I will have a google [11:21] nikolam: each package has individual ppa [11:21] indus, i will get new one, i just wanted to know if it is actually changed [11:21] oh, well, yes thats right [11:21] HI , i want to connect my vpn but i get this error http://imagebin.org/67888 how can i fix this ? [11:21] albasheers: or try mpeg: ffmpeg -i inputfilenameheredude.flv -ab 56 -ar 22050 -b 500 -s 320x240 video.mpg [11:22] mechdave, im booting up a second ubuntu machine next to me so i can play with the routes on it instead of this one and keep getting disconnected [11:22] lanoxx: ok looks ok, now check the rest [11:22] azlon ok good that you have a second Ubuntu machine, that makes testing easier [11:23] ActionParsnip, there is no other file with folder-handler in it [11:23] ActionParsnip: it showing the same error [11:23] ActionParsnip, /usr/share/applications $ls |grep folder [11:23] nautilus-folder-handler.desktop [11:23] HI , i want to connect my vpn but i get this error http://imagebin.org/67888 how can i fix this ? [11:23] HI , i want to connect my vpn but i get this error http://imagebin.org/67888 how can i fix this ? [11:24] albasheers: you need to find a command online that uses ffmpeg. You might be able to use handbrake but ive not used it [11:24] lanoxx: nice [11:24] hi guys [11:24] lanoxx: you could click around in gconf [11:24] HI , i want to connect my vpn but i get this error http://imagebin.org/67888 how can i fix this ? [11:25] who do i start gconf? [11:25] lanoxx: hmm: sudo apt-get --reinstall install nautilus may just make it reset itself as default due to postinst scripts ;) [11:25] azlon, harisund try --> sudo route del default <-- deletes current default route [11:25] azlon, harisund try --> route add default gw 10.64.64.64 [11:25] lanoxx: gconf-editor [11:25] azlon, harisund adds a new default route [11:25] hello [11:25] ActionParsnip: I have tried handbrake, winFF but no use it is not converting [11:26] HI , i want to connect my vpn but i get this error http://imagebin.org/67888 how can i fix this ? [11:26] r3za: Doesn't look that there's anybody around at the minute with experience of that, its probably worth asking again in about 15-30 minutes to give chance for other people who may be able to help to join the channel [11:26] how do i use a library in my c++ app after installing it via the ubuntu repos? for example i installed "libsqlite3-dev"... how do i include it in my program now? [11:26] mechdave, wont that add on eth1 again? seems like there should be a flag for default adapter [11:26] DJones: :( === humandssdsds is now known as danielisme [11:26] DJones: thanks anyway [11:26] albasheers: http://www.ubuntugeek.com/convert-flv-google-videos-to-mpg-using-ffmpeg.html [11:26] i have ubuntu with fluxbox and want to upgrade the system, any upgrade available without gui update manager [11:26] ? [11:26] albasheers: all i'm doing is websearching [11:26] azlon, possibly... hang on shall re read [11:27] is maven2 broken on karmic koala ? [11:27] ActionParsnip, now if i click in Places->Somebookmark nothing happens at all [11:27] hey guys can anybody help me. i just restarted ubuntu 9.04 and after the reboot its saying my network is disconnected [11:27] The UG flag means the link is "up" and to "gateway" and UH flag means the link is "up" and to a "host" .. [11:27] i mean ubuntu without gnome-xfce-kde is just fluxbox [11:27] Sia--, sudo apt-get update && sudo apt-get upgrade [11:27] albasheers: ffmpeg -i input.flv output.avi may just work [11:27] hey guys can anybody help me. i just restarted ubuntu 9.04 and after the reboot its saying my network is disconnected when it ovbiously isnt since in using it to type this, i also just changed my MAC address and restarted my router/modem before the reboot, which probably has something to do with it [11:28] joaopinto, is for upgrade or upgrade to new system? [11:28] it is for upgrade in the current release [11:28] if you are looking for karmic, join #ubuntu+1 [11:28] azlon, harisund try --> route add default gw 10.64.64.64 dev ppp0 [11:29] hey guys can anybody help me. i just restarted ubuntu 9.04 and after the reboot its saying my network is disconnected when it ovbiously isnt since in using it to type this, i also just changed my MAC address and restarted my router/modem before the reboot, which probably has something to do with it [11:29] lanoxx: then ive no idea, i would hunt in gconf some place to see whats going on [11:29] mechdave, SIOCADDRT: No such process [11:29] ActionParsnip: now I am getting this error Cannot allocate temp picture, check pix fmt [11:29] danielisme: you just repeated that within 20 seconds to the same users, whats the point? [11:29] azlon, try a sudo in front [11:30] ActionParsnip: Sorry [11:30] hi guys. I've been trying out non-gnome desktop recently. I was told to try out openbox, and to configure my .gtkrc-2.0 manually [11:30] mechdave, that was with a sudo [11:30] now, when I switch back to gnome, I have to move that file elsewhere so as not to confuse gnome settings [11:30] is there a way to make gnome play nice with it? [11:30] azlon, righto... rethink time, route really screws with my head :( [11:31] =) [11:31] how do i use a library in my c++ app after installing it via the ubuntu repos? for example i installed "libsqlite3-dev"... how do i include it in my program now? [11:31] Neremor: you use the appropriate header file, and when compiling link the corresponding library with the -l option if you are using gcc etc [11:31] mechdave, im trying to read the man but im pretty sure i understand every-other word... [11:32] anyone got a reasonable working knowledge of route? [11:32] azlon, it does my head in... [11:32] I feel like I just made a horrible mistake. I wanted a MID that supports Ubuntu so I bought the SmartQ 5. Didn't realize it cant support Ubuntu MID Edition and cant support much software. Anybody own one? [11:32] Can anyone help me with a wireless problem? [11:32] albasheers: http://paste.ubuntu.com/293818/ [11:33] eltew: I don't think any MID right now actually supposts Ubuntu MID edition .. I am looking for one myself :( [11:33] auto-ethernet fixed my problem but it isnt the fix i wanted [11:33] all...I am running ubuntu 9.04 and whenever I set my IP information statically, I loose DNS resolution, even though the server is configured. I also see it in my resolv.conf file. Anybody have any ideas? [11:33] hi, using reportlab 2.3 i get this error: "Can't setFont(Times-Roman) missing the T1 files?" ... does someone know what package is missing in 9.04? i have msscorefonts installed and would like to avoid installing everything until i hit the right one - yes, its not realy #ubuntu specific, but maybe someone here knows [11:33] harisund: I believe the Samsung Q1 supports it. If you can afford it (which I cant). lol [11:33] teragram: what is your problem? [11:34] azlon: sorry man i have to get to bed now, maybe another time .. :( [11:34] Does anyone have any experience with the SmartQ series? [11:34] nalconis, gateway is ok in static conf ? [11:34] I have a weird intermittent issue - almost every time I start my machine the wireless fails to connect. Restarting the machine, or turning on and off the card (with the button on the laptop) will sometimes make it connect properly [11:35] scout: yes... When I open a term and specify the DNS server in NSLOOKUP, I can ping FQDNs within the window.... [11:35] harisund, thanks for all the help! [11:35] mechdave, i think i got it... let me apply the settings to this computer instead of the laptop and ill brb [11:36] I know the key is correct, because it does connect sometimes, but when it's not working the dialog for entering the key comes up [11:36] anyone know how to use the full functionality of MS Exchange with a Linux client? [11:36] teragram: could be faulty hardware, is this an older laptop? [11:36] brand new :( [11:36] where does gnome store it's gtk/theme settings? [11:36] is there a flat file I can look at? [11:36] (I plan on putting such file under revision control for backup during changes) [11:37] hoo-hah: GNOME mostly uses Gconf, which can be accessed through gconf-editor or the XML hell at ~/.gconf/ [11:38] xscout: do you have any ideas? [11:38] azlon, harisund try --> route add default gw 10.64.64.64 ppp0 that should work [11:38] mechdave, muahahaha, got it! [11:38] danielisme: When it's not working, it detects the network (usually) and tries to connect for a couple of minutes, then pops up the wlan key dialog [11:38] azlon, awesome, what was the command? [11:38] mechdave, what is the gw 10.64.64.64 represent? because i took out the gw and it worked [11:38] grawity: cool, thanks. The path I found was ~/.gconf/desktop/gnome/interface [11:39] mechdave, "sudo route add default ppp0" [11:39] grawity: and the filename is %gconf.xml [11:39] azlon, gw = gateway [11:39] mechdave, well i say it worked but i dont really know yet... i can just have eth1 and ppp0 up and i can access the internet, now we will see if i can share it [11:39] danielisme: is there any way I can check the hardware? (I scrubbed windows before I realised this was happening, so I don't know if it's Ubuntu specific) [11:40] also, I don't have an xorg.conf file and can't save my x settings. Has anyone dealt with this? I have seen numerous posts on the Internet, but no solution [11:40] mechdave, gw is gateway, but my local IP on this machine is 192.168.0.1 so i was putting "gw 192.168.0.1" not "gw 10.64.64.64" [11:40] azlon, and is your machine set up as a gateway? [11:41] mechdave, uhmm... isnt that what the dnsmasq did? [11:41] r3za: check here http://forums.fedoraforum.org/showthread.php?t=200278 [11:41] setting yourself as a DG should force your machine to broadcast for all IPs - whether or not they are on your own machine. If your local router supports proxy arp, it should respond for you [11:41] *whether or not they are on your local subnet [11:41] sorry [11:42] typo [11:42] hi all does this load for you guys ? i just set up my home server [11:42] elliotbeken : What all [11:42] mechdave, does this look right? http://pastebin.com/d1a2a4ac8 [11:42] mechdave, for some reason i have 2 default routes... :| [11:43] sorry http://elliotbeken.dyndns.org [11:44] azlon, yeah you need to get rid of the eth1 one [11:44] elliot: yeap [11:44] I got to you [11:44] mechdave, ok, got rid of it... now i have: http://pastebin.com/d5fbb50eb [11:44] elliotbeken, yeah no worries, no index.html though [11:45] elliot: I am listening to your MP3s right now. [11:45] azlon, that looks better [11:45] elliot: Why do you listen to Hanna Montana? [11:46] mechdave, i still don't have a gw though... don't i need this if i am going to share the internet? [11:46] azlon, are you trying to share internet only? [11:46] ha ha i let dudes in my college to upload there own songs i think it was a personal joke [11:47] azlon, why don't you use http://ubuntuforums.org/showthread.php?t=91370 [11:47] mechdave, uhmm... would like to do much more but internet sharing is the main thing. i would like to do QoS and whatnot later [11:48] elliot: I was joking about the hanna montana thing...hhaha [11:48] azlon, I have only used iptables and masq to do that [11:48] !ics [11:48] If you want to share the internet connection of your ubuntu machine with other machines in the network see https://help.ubuntu.com/community/InternetConnectionSharing - You may also use !firestarter: http://www.fs-security.com/docs/connection-sharing.php [11:49] mechdave, erUSUL, i have read that site and it has never worked for me because of my ppp0 3G modem. harisund had me going through http://www.gentoo.org/doc/en/home-router-howto.xml [11:49] azlon, and then you could use dns on the subnet that you create [11:49] lol ha well there is some disney theme tunes on there [11:49] azlon: you nly have to put ppp0 instead of eth0 in the iptables rule and it should work [11:50] hola, es la primera vez que me conecto, hay alguna sala en espaniol o estamos todos los idiomas juntos? [11:50] azlon, I used firestarter as a dialup server, worked great [11:50] !es | sanrom [11:50] sanrom: En la mayoría de canales Ubuntu se comunica en inglés. Para ayuda en Español, por favor entre en los canales #ubuntu-es o #kubuntu-es. [11:50] i am not able to choose a right a linux installlation for me. [11:50] should i choose ubunut/ fedore/ sabyon [11:50] opensuse [11:50] or what?? [11:50] *ubuntu /fedora [11:50] thanks you! [11:51] mechdave, let me try firestarter again... brb [11:51] sahilsk, After using all 3 I would pick Ubuntu first [11:51] hello, if you are using jaunty and fluxbox, can you check with top how much ram memory is xorg spending? My own spends 388MB with nothing running, just flat fluxbox screen... [11:51] sahilsk, please discuss in #ubuntu-offtopic , as this is for existing ubuntu installs === MadMax is now known as MaxSid [11:52] it is to much, coz I have Intel Atom with 512mb soddim ddr2 [11:53] hey all, need help getting my epson printer working in ubuntu???? [11:53] azlon, are you sharing to 1 pc or many? [11:54] hey all, need help getting my epson printer working in ubuntu???? [11:54] !printers [11:54] Printing in Ubuntu is done with cups. See https://help.ubuntu.com/community/Printers - https://wiki.ubuntu.com/HardwareSupportComponentsPrinters - http://linuxprinting.org - Printer sharing: https://wiki.ubuntu.com/NetworkPrintingFromWindows [11:54] danwagon, try looking up your printer model on http://linuxprinting.org [11:54] Ive checked that out but I dont get it.... === freko_ is now known as freko28 [11:55] mechdave, many... this is driving me nuts [11:56] mechdave can you help? [11:56] azlon, ok you want to use dhcp then... The way I would go about it would be use iptables and NAT and then create a subnet for your clients and run dhcp on that [11:56] danwagon, is your printer listed? === [Gloom]_ is now known as [Gloom] [11:57] refering to this bug: https://bugs.launchpad.net/ubuntu/+source/plexus-container-default/+bug/417164 maven 2.2 doesnt seem to work on karmic koala, is there anyway to mend this? [11:57] mechdave, sounds similar to what i was trying to do but it didnt work... i got all the way to installing dnsmasq... now i think i need to setup NAT... brb [11:58] epic: karmic questions in #ubuntu+1 please [11:58] epic, #ubuntu+1 for karmic support [11:58] mech yes its listed, what driver do I need and how to install it? [11:59] azlon, follow this --> https://help.ubuntu.com/community/Internet/ConnectionSharing?action=show&redirect=InternetConnectionSharing [11:59] does anyone here have a ibm t30 laptop with ubuntu [11:59] hi there [11:59] azlon, the best way is to start from scratch and set up your gateway first [12:00] Can anyone help with a weird intermittent wireless problem? [12:00] mech yes its listed, what driver do I need and how to install it? [12:00] mechdave, ok [12:00] I created a root account a few days ago. Now I read I can't log in with root, so how to use it? Didn'T find something useful on ubuntu forum (german) [12:01] danwagon, I don't know... what is the page where your printer is listed? [12:01] danwagon, I need the url [12:02] hello [12:02] http://www.openprinting.org/show_printer.cgi?recnum=Epson-Stylus_TX400 [12:02] I did an ls and it says drwxrwxrwt [12:02] what does that mean? [12:02] http://www.openprinting.org/show_printer.cgi?recnum=Epson-Stylus_TX400 [12:03] danwagon, you need to install gutenprint [12:03] will that make the printer work? [12:03] Leela: If you login with another user and try the command su, does it work or the password doesn't work ? [12:04] danwagon sudo apt-get install cups-driver-gutenprint [12:04] for a file server with raid5, do I need an extra harddisk for booting or can i boot from the raid5 disks? [12:04] DarkMasterHalo, it asks for the account password and not for the root password. so e.g. I can't use synaptic [12:05] danwagon, then set up the printers from System -> Administration -> Printing [12:05] hedkandi: 'd' - directory. Then, the first group 'rwx' is for the owner - read, write, and execute permissions. The next 'rwx' is for the assigned group. Third - 'rwt' - read, write, execute, plus the "sticky bit". [12:05] Leela: You can use your own password. On Ubuntu, they replaced the root account with a deep integration of sudo [12:05] Wouldn't say "replaced". [12:06] Well, :) [12:06] DarkMasterHalo, the root password is not the same. === peterz is now known as peterz_afk [12:06] Starting tor daemon: tor... [12:06] Oct 15 19:05:41.919 [notice] Tor v0.2.0.31 (r16744). This is experimental software. Do not rely on it for strong anonymity. (Running on Linux i686) [12:06] Oct 15 19:05:41.922 [notice] Initialized libevent version 1.3e using method epoll. Good. [12:06] Oct 15 19:05:41.922 [notice] Opening Socks listener on 127.0.0.1:9050 [12:06] Oct 15 19:05:41.923 [warn] Could not bind to 127.0.0.1:9050: Address already in use. Is Tor already running? [12:06] zhoujingrui: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [12:06] Oct 15 19:05:41.923 [warn] Failed to parse/validate config: Failed to bind one of the listener ports. [12:06] Leela: I know, but you do everything with your own password. Not the root account or the root password. [12:06] DarkMasterHalo: Most of the "integration" is very simple - the 'gksu' tool has a option in gconf, to make it always run in 'gksudo' mode. [12:07] Reading package lists... Done [12:07] Building dependency tree [12:07] Reading state information... Done [12:07] W: Duplicate sources.list entry http://ppa.launchpad.net hardy/main Packages (/var/lib/apt/lists/ppa.launchpad.net_team-xbmc-hardy_ppa_ubuntu_dists_hardy_main_binary-i386_Packages) [12:07] W: You may want to run apt-get update to correct these problems [12:07] danwagon: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [12:07] jj [12:07] !sudo | Leela [12:07] Leela: sudo is a command to run programs with superuser privileges ("root"). Look at https://help.ubuntu.com/community/RootSudo for more information. For graphical applications see !gksu (Gnome, XFCE), or !kdesudo (KDE) [12:07] DarkMasterHalo, I limited many functions for the normal user and gave most rights only to root. I just can't do anything atm... [12:07] grawity: Oh, thanks for the clarification, didn't knew that. You think it is possible to do it for KDE too. I'm on Fedora and would like to have this type of integration :P [12:08] I know what sudo is. i use ubuntu since 3 years. I ask about root and not sudo [12:08] i answer about sudo. [12:08] a sudoer is not a "normal user" [12:08] mechdave, i followed that tutorial and i cant even ping this computer from my second ubuntu machine now https://help.ubuntu.com/community/Internet/ConnectionSharing?action=show&redirect=InternetConnectionSharing [12:08] Leela: In Ubuntu, you use 'sudo' to get root privileges. (Unless you really want to get the good old root account, which isn't recommended, but isn't that hard to do either.) [12:08] mech can you im me [12:09] DarkMasterHalo: KDE - does it use 'kdesu' or something like that? [12:09] but when i use sudo, it wants the normal password, the one i log in with. and this doesn'T work [12:09] that's what sudo does. [12:09] I activated the root account gave most rights to it and changed the password [12:10] but none works [12:10] grawity: Yop it uses kdesu :P, but I think in some circumstence, it asks for the root password. But I think I only saw it when my sudoer file wasn't configured :P [12:10] hey all, need help getting my epson printer working in ubuntu???? [12:10] if it doesn't work, you removed yourself from the admin group, or you removed the admin group from sudoers [12:10] not the loginpw neither the root pw [12:11] grawity: And I never used the root account here except to setup the sudoer file :P [12:11] DarkMasterHalo: I'd browse the KDE's config tool (kcontrol or whatever it is). [12:11] *sighs* [12:11] danwagon, what does that site say about it? fully functional? paperweight? [12:11] * grawity is happy with root on Arch. [12:11] is there a german support channel? [12:11] #ubuntu-de [12:11] #ubuntu-de [12:11] thanks :) [12:12] mechdave, ok, i can finally ping my server again, but i still cant share the internet [12:13] #TomTomTools [12:14] azlon, ok sudo iptables -A FORWARD -i eth0 -o eth1 -s 192.168.0.0/24 -m conntrack --ctstate NEW -j ACCEPT should read sudo iptables -A FORWARD -i ppp0 -o eth1 -s 192.168.0.0/24 -m conntrack --ctstate NEW -j ACCEPT [12:14] can someone please help me with what would appear to be a noob issue [12:14] i'm on 9.10 netbook and i can't for the life of me figure out how to rearrange the icons in the favorites [12:14] PCTechNerd, just ask away [12:15] Graphical LVM partitioner anyone? [12:15] hello, if you are using jaunty and fluxbox, can you check with top how much ram memory is xorg spending? My own spends 388MB with nothing running, just flat fluxbox screen...HELP :) [12:15] PCTechNerd: #ubuntu+1 for help with karmic [12:15] !lvm [12:15] Tips and tricks for RAID and LVM can be found on https://help.ubuntu.com/community/Installation/SoftwareRAID and http://www.tldp.org/HOWTO/LVM-HOWTO - For software RAID, see https://help.ubuntu.com/community/FakeRaidHowto [12:15] PCTechNerd, karmic support in #ubuntu+1 [12:15] jrib:thanks [12:15] mechdave, this is exactly what i did: http://pastebin.com/d7570f4e2 [12:16] azlon, ok paste the output of iptables -L [12:16] how can a run this command over SHH "sudo gedit /etc/apache2/apache2.conf" ?? [12:16] azlon, ok have you set eth1 to 192.168.0.1 or similar? [12:17] elliotbeken: use nano instead of gedit [12:17] mechdave, yes, 192.168.0.1 [12:17] azlon, and the client is 192.168.0.2 [12:17] mechdave, client is 192.168.0.100 and a windows xp machine is 192.168.0.110 [12:18] azlon, ok [12:18] mechdave, this iptables -L is still listing stuff from my ISP, should i stop it? [12:18] azlon, now to what is the gateway address set to? [12:18] do i need firewall if i have a router [12:18] mechdave, gateway on client is 192.168.0.1 [12:19] azlon, ok on the client is the gateway set to that? [12:19] elliotbeken: if you really want to run gedit, then connect using ssh -Y hostname but sudo nano works best over ssh [12:19] mechdave, yes, gateway and dns are 192.168.0.1 on the client machines === Anon770 is now known as webmaster [12:20] ok it works how do i hsave in nano [12:21] elliotbeken: Ctrl-O to save, Ctrl-X to save+exit. === webmaster is now known as WebMaster [12:21] cheers [12:21] elliotbeken: read the bottom of your window, ctrl-o to write out, ctrl-x to exit, etc [12:21] azlon, ok what is your DNS server addresses? Your NAT box so far does not have DNS capability [12:21] hrmm [12:22] ok, i will use OpenDNS for now then [12:22] hodl on [12:22] azlon, I would just enter the DNS addresses straight into the client for now [12:22] azlon, much simpler [12:22] mechdave, ok, hold on [12:24] I am trying to install a package called aegis. I can see at packages.ubuntu.com it is available for dapper, intrepid, jaunty, karmic. would there be a reason it is not available for hardy? [12:24] mechdave, still nothing on the ubuntu machine, let me try the windows machine [12:24] azlon, and you can ping the server? [12:24] mechdave, nevermind, it is working on the ubuntu machine, just had to give it a minute [12:24] mechdave, sweet! [12:24] :D [12:25] mechdave, now i just need to make this server a dns server.. right? [12:25] azlon, Ok now what we do is use dhcp to distribute ip addresses and dns info [12:27] mechdave, i'm ok with using static ip addresses [12:27] yo yo yo [12:28] azlon, ok then all you do is add your ISP's DNS server addresses to the DNS part of the client computer networking serup [12:28] azlon, then all is done :) [12:28] mechdave, awesome! can i use the server's ip as the DNS? [12:28] azlon, later you can add a proxy and QoS if you want [12:29] hi all i am getting this message on startup. users $home.dmrc file is being ignored. this prevents the default session from being saved. files should be owned by user and have 644 permissions [12:30] azlon, no, you don't have any DNS resolver on your machine, besides the DNS addresses for your ISP is an external address so NAT will just rout them to the internet [12:30] cool! thanks! [12:31] mechdave, one more question... how can i get the DNS for my ISP? i thought it would be in ifconfig but i dont see it [12:31] azlon, it will be in /etc/resolv.conf [12:31] hi all i am getting this message on startup. users $home.dmrc file is being ignored. this prevents the default session from being saved. files should be owned by user and have 644 permissions [12:32] Hello. From machine A I can successfully scan on B using `scanimage -d "net:machineB:hpaio:/usb..."`. But the same command from machine C shows me "scanimage: open of device net:machineB:hpaio:/usb... failed: Error during device I/O". Any idea what's missing on machine C? [12:32] azlon, another thing, make sure that iptables is dropping every packet that is not related or established [12:32] hi there I have trouble with aMule speed I receiving a very low ID [12:33] azlon, that will drop all probes from zombies [12:33] mechdave, how do i do that? [12:33] meowbang: what does ls -l ~/.dmrc say? [12:34] somebody can help me? [12:34] azlon, Hang on it has been a long time since I have done this... [12:34] ls means list -l means list ~ means shortform of directory (path) and lost may be file ext [12:35] FloodBot1, I have trouble with aMule speed I receiving a very low ID [12:36] FloodBot1 isn't much of a conversationalist [12:36] FloodBot1, Do you know how can result this... [12:36] FloodBot is not a human being [12:37] hallo [12:37] ok [12:37] how can i remover webmin using the terminal ? [12:37] prince_jammys, thank you [12:37] welcome [12:37] prince_jammys, I have trouble with aMule speed I receiving a very low ID [12:37] prince_jammys, you can help me? [12:37] heogen: i haven't used that in ages, but I always had low ID :) [12:37] azlon, I have used this --> http://easyfwgen.morizot.net/gen/ [12:38] prince_jammys, ok [12:38] azlon, and get on an external network and nmap your ip address to make sure there are no ports open [12:38] !netsplit [12:38] netsplit is when two IRC servers of the same network (like freenode) disconnect from each other, so users on one server stop seeing users on the other. If this is happening now, just relax and enjoy the show. See http://en.wikipedia.org/wiki/Netsplit [12:38] heogen: i would *guess* that's it's firewall/router related. [12:38] but I really don't know. [12:39] ciao a tt [12:39] !it [12:39] Vai su #ubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! (click col tasto destro sul nome del canale per entrare) [12:39] prince_jammys, what program do you use for aMule [12:39] ? [12:39] lg ngapin [12:39] heogen: i don't. i did many years ago. [12:39] mechdave, ok, thanks! [12:39] ok [12:40] prince_jammys, ok, thank you guy [12:40] i tried eMule, but there is no ubuntu software available :( [12:40] azlon, that will give you a good start anyway... How is your head spinning? [12:41] mechdave, it is slowing recovering... feels like i have been on the teapots at disneyland for 4 hours [12:41] on karmic: Cron does not run. I can start it manually, but how can I make it start at boot time? [12:41] SauLus, #ubuntu+1 for karmic [12:41] ty [12:43] azlon, Lol, it gets easier the more you read about iptables and squid etc... they all work together and they can give you a really tight network if done properly === tonyyarusso is now known as Guest93713 === Sonderbla is now known as Sonderblade [12:44] mechdave, now that i have that pretty much wrapped up i want to start taking advantage of this 3G modem and see if i can send/recieve SMS messages with it. the goal is to be able to send and SMS from my phone to the modem and have it message me back the status of my RAID-5 [12:44] azlon, I recommend you do some more reading on iptables try here to start with... these docs give you a good background --> http://netfilter.org/documentation/index.html#documentation-howto === eddie is now known as Guest55350 [12:45] azlon, Ooohhh... you have lost me there, I wouldn't know where to start with that one :) [12:45] yes good day [12:45] mechdave, another challenge ;) thanks! i will read up on those articles while at work! [12:45] anyone here used mint 7 [12:45] azlon, there still will be giant gaping holes in your server security... [12:46] am new how do you make a bot in her [12:46] !mintsupport [12:46] Linux Mint is not a supported derivative of Ubuntu, please seek support in #linuxmint on irc.spotchat.org [12:46] azlon, is this going to be on all the time? [12:46] mechdave, 24/7 === evildmp_ is now known as evildmp [12:46] Guest55350: ask in #freenode [12:46] i could not use my c-media soundcard there but it works great on ubuntu [12:46] mechdave, should i run something like firestarter to start out with? [12:46] meowbang: proberly kernel/alsa version differances. [12:47] azlon, are you going to run the modem full time? [12:47] could be. i should look into that adn see if i can change it if there is [12:47] mechdave, yeah, it is my only connection to the world (i live in Kuwait) [12:47] azlon, I wouldn't, I would just read up on iptables and configure it to suit [12:47] does any one like ubuntu 10.5 [12:48] live (in calie) [12:48] Guest93713, there is no such version [12:49] Guest55350, is that still in developnent \ [12:49] oops Guest55350 there is no such version [12:49] azlobesides it will give you a deeper understanding of the networking side of things [12:49] if its not official i not into it [12:49] azlon, besides it will give you a deeper understanding of the networking side of things [12:49] it's ok am back [12:49] ubuntu 9 is the latest out [12:49] no 10.5 in 14 days [12:50] meowbang: 9.04, not 9 [12:50] no its not [12:50] count down [12:50] i never seen any test releases [12:50] The latest is 9.04, but 9.10 will be released soon. [12:50] where is ubuntu 10 [12:50] meowbang: next year [12:50] ok [12:50] Guest55350, #ubuntu+1 is 9.10 support (next version support channel) === apw` is now known as apw [12:50] azlon, all the best... I have to go to bed... 0530 get up for me :( [12:50] see Guest55350 got it rong as i thought [12:50] mechdave, thanks again man! [12:51] it is 4:60at my house [12:52] azlon, any time, that's why I'm here :) [12:52] Hi, I'm new to Linux, i fucked up my eclipse installtion by deleting /usr/lib/eclipse/* don't know how do un/reinstall eclipse [12:52] unRuhe, please watch the language [12:53] Hi, I'm new to Linux, i destroyed my eclipse installtion by deleting /usr/lib/eclipse/* don't know how do un/reinstall eclipse [12:53] man am on a old dell i found and some left over parts i had [12:53] sory [12:53] heh [12:53] unRuhe: sudo apt-get remove eclipse will uninstall it [12:53] sudo apt-get install eclipse will install it again [12:53] ubuntu gave it life [12:53] Guest55350, did you have an ubuntu support question [12:53] hey all === Qster_ is now known as Qster [12:53] i'll try that [12:54] er [12:54] i was curious to know if someone could help me with getting my ati 4870x2 drivers working properly [12:54] unRuhe: sudo apt-get install --reinstall eclipse [12:54] what is the easiest way to create and new home partition?? [12:54] !home [12:54] Your home directory is where all of your personal files are usually kept. For moving your home directory to a separate partition, please see: http://psychocats.net/ubuntu/separatehome [12:55] lodder_: easiest way is do it at install time [12:55] ActionParsnip: yes but currently i have a /home partition but i would like to move it to lvm [12:55] is Transmission the best torrent client for ubuntu? === m4v_ is now known as m4v [12:55] deluge is also good [12:56] preecher: There is no "best". [12:56] preecher: no, but none of the others are best either [12:56] preecher: they are just different [12:56] which do most prer?fe [12:56] !best [12:56] Usually, there is no single "best" application to perform a given task. It's up to you to choose, depending on your preferences, features you require, and other factors. Do NOT take polls in the channel. If you insist on getting people's opinions, ask BestBot in #ubuntu-bots. [12:56] i personally prefer deluge [12:56] preecher: i like transmission but only because my g1 phones talks nicely to it [12:56] o ok [12:56] preecher: there is no best software for any one task on any OS [12:57] preecher: something is only best if it is what YOU like [12:57] i was curious to know if someone could help me with getting my ati 4870x2 drivers working properly [12:57] preecher: toms hardware site had a list of most torrent clients and their pros/cons for linux the other day [12:57] preecher: there is no sngle best or everyone would use that and nothing else ever for that task [12:58] i have USB speakers but i dont hear any sound... how can i enable the USB speakers? [12:58] how do i jail brake my iphone with the new update [12:58] tru [12:58] Guest55350: Wrong place to ask. [12:58] azlon: they are a seperate sound device, so you must setupyour soundconfig to use them [12:58] Guest55350: ...this is #ubuntu [12:58] !ot | Guest55350 [12:58] Guest55350: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics. Thanks! [12:58] do you have a iphone in jail ? [12:58] nibbler_, how do i that? [12:58] OerHeks: it didnt pass go either, or collect 200 pounds :D [12:59] no jest wanted to see if am herd [12:59] azlon: system->preferences->sound i guess [12:59] Guest55350, random chat in #ubuntu-offtopic please [12:59] does anyone know of its possible have knetworkmanager automatically connect to my wifi without having kwallet query me for the password? [13:00] hsarci: for gnome - you set a blank password (empty) in the wallet tool and it will auto-connect.. Not sure about kdes equilivent [13:00] use th #key [13:00] no pass word [13:00] th #key? [13:00] hsarci, get it to remember the password there should be a check box saying save password [13:01] does anyone know how to set up ati drivers?? [13:01] !ati [13:01] For Ati/NVidia/Matrox video cards, see https://help.ubuntu.com/community/BinaryDriverHowto [13:01] ati suckes [13:01] m1k3y: have you checked www.ati.com [13:01] Guest55350: +1 dude [13:01] meowbang, obviously theres no checkbox that says "save password" or i wouldn't be asking this quesiton [13:02] hsarci: maybe installing pam-keyring [13:02] m1k3y: they have little run files which should driver you up [13:02] how do I enable strg+alt+backspace to kill x? [13:02] !dontzap [13:02] To re-enable the Ctrl+Alt+Backspace combination that restarts your X server, you can install the "dontzap" package and use the command « sudo dontzap --disable ». The combination Alt+SysRq+K can also be used to obtain a similar effect. [13:02] m1k3y, go to menu type drivers then click on application adn it will auto config adn download them [13:02] SauLus: youmean that? [13:02] ty ActionParsnip [13:02] ill try that, erusul [13:03] i followed the instructions from ati and i installed them and then this happened http://www.youtube.com/watch?v=Fha5-nWNK3k [13:03] m1k3y, sorry if not that i am using crunchbang atm so cant check for you [13:03] erusul, its not in the repos [13:03] !info libpam-keyring [13:03] Package libpam-keyring does not exist in jaunty [13:03] !info libpam-gnome-keyring [13:03] libpam-gnome-keyring (source: gnome-keyring): PAM module to unlock the GNOME keyring upon login. In component main, is optional. Version 2.26.1-0ubuntu1 (jaunty), package size 32 kB, installed size 108 kB [13:03] m1k3y, you are using karmic? [13:04] no sorry! what is karmic?? [13:04] hola a todos!!! [13:04] m1k3y, 9.10 [13:04] doh! no 9.04 [13:04] m1k3y: what is the output of: lsb_release -c ? [13:04] ActionParsnip: this program is in screen-resolution-extra in karmic, jfyi [13:05] google the error it gaveyou ok m1k3y [13:05] brubrick, #ubuntu-es por espanol [13:05] SauLus: ok gotcha, thanks :) [13:06] m1k3y, in the futur please take a screenshot of the message and put on www.imagebin.ca [13:06] erUSUL, libpam-gnome-keyring ? [13:06] or copy the txt and put it on www.pastebin.com [13:07] then i could have seen it easier and stuff [13:07] Anybody know how to get a background image on tty1 (framebuffer device) with Jaunty? [13:07] ^ m1k3y [13:07] Been trying for ages having no luck [13:09] Compiled fbterm and fbv/fbi, tty 1024x768x24bpp, fbterm only works on 16 or 32 not 24 [13:09] !netsplit [13:09] O_O [13:10] Niiice.. [13:10] thanks! im not geting an error. im looking for the tutorial i used to get it kinda working. there was a command at the end of the install that i typed in to get x to start but now im running basic graphics [13:10] KingOverload: Quite. [13:11] Anywho, anyone with framebuffer knowledge? My google-fu has failed me :( [13:12] this was the command that seemed to disable my graphics " sudo aticonfig --initial -f " [13:17] hi [13:18] #ubuntu-cn [13:18] anyone know how to route application through pulse audio [13:19] anyone know if/what package python-csvn is in? (it's a ctypes binding of libsvn for python, the python-svn package appears to be the swig bindings) === olivier is now known as Guest69399 [13:21] gggggg [13:21] how can i find out what port my USB modem is plugged into? i think it is /dev/ttyUSB0 but i'm not sure [13:21] junax, Do not spam [13:21] how to watch porn in firefox? [13:21] !flash | jimmy_ [13:21] jimmy_: To install Flash see https://help.ubuntu.com/community/RestrictedFormats/Flash - See also !Restricted and !Gnash [13:21] irc://irc.travian.org/travian.fr [13:21] what is flash? [13:21] azlon: I'd just check if /dev/ttyUSB0 replies to the usual commands. [13:22] is there any one who can help me bout my pidgin coz it doesnt work... [13:22] im 12 and what is this? === decomp is now known as decomp_away [13:22] This is the Ubuntu Support Channel on freenode [13:22] to whoever was helping me, making a wallet with a blank pass did the trick [13:22] what is freenode? [13:22] !ask | Streetboys [13:22] Streetboys: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) [13:22] An IRC network [13:22] * grawity sighs and considers trying another factoid, one that starts with '!op' [13:22] What is IRC? Internet Relay Chat [13:22] !ops jimmy_ [13:22] Sorry, I don't know anything about ops jimmy_ [13:23] !ops | jimmy_ [13:23] jimmy_: Help! Channel emergency! (ONLY use this trigger in emergencies) - elky, imbrandon, DBO, gnomefreak, Hobbsee, rob, Madpilot, CarlK, crimsun, ajmitch, tritium, Nalioth, thoreauputic, apokryphos, tonyyarusso, PriceChild, Amaranth, jrib, jenda, nixternal, Myrtti, mneptok, Pici, Jack_Sparrow, nickrud, jpds, bazhang, jussi01, Flannel or ikonia! [13:23] really? [13:23] grawity, well i tried going into /dev/ttyUSB0 but it says "Not a directory"... i was going to do a cat /dev/ttyUSB0/model [13:23] help me bout my pidgin coz it doesnt work... [13:23] IRC is awesome! [13:23] indus: What? [13:23] azlon: /dev/tty* is a device file. [13:23] Streetboys: What is your problem? [13:23] lol @ jimmy_ [13:23] if i knew wat is awesome? [13:23] !ot | jimmy_ [13:23] jimmy_: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics. Thanks! [13:23] grawity, so what command could i runt o verify it is my modem? [13:23] jpds: wait and watch [13:23] indus: I am. [13:23] my pidgin, i add my yahoo actt but it doesnt work. [13:23] Lol is awesome.but what is that?! [13:23] azlon: Not sure if there's a simple one... maybe install miniterm and tell it to connect to /dev/ttyUSB0? [13:24] Streetboys: Update your Pidgin. [13:24] StrangeCharm, You need to upgrade Pidgin [13:24] Streetboys: http://pidgin.im/download/ubuntu has instructions. [13:24] Fail tab [13:24] jimmy_: Im going to give you some time to just observe. [13:24] ive got a quem [13:24] how can update my pidgin [13:24] lol [13:24] i am using ubuntu 9.10, the sticky notes applet does not work. [13:24] !karmic | huang [13:24] huang: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [13:24] grawity: pidgin doesn't support yahoo? or did yahoo change their protocol? [13:24] Yahoo changed the protocol [13:24] jimmy_: for normal chatter, please use #ubuntu-offtopic [13:24] fail [13:25] xD [13:25] brocade 300 san switch + hp dl380 g6 qlogic + hp msa 2012fc storage why just 400 mbps? [13:25] says i wanted to run "echo -n 230 > /sys/devices/platform/i8042/serio1/serio2/sensitivity" everytime i boot or return from a suspend...what should i do? [13:25] KingOverload: that's crap, did they add something? or just try and screw with third party clients? [13:25] Ademan: Yahoo changed just a little something, and Pidgin got locked out. Of course, the devs fixed that (as always), but the update is not in Jaunty's repos. [13:25] jussi01, I don't think he realises you muted him [13:25] Ademan: They _always_ try and screw with third-party clients. (And I understand why they do that.) [13:25] Ademan, Not a clue, I just heard they changed it and everyone needs to update Pidgin [13:25] I know they changed some paging servers [13:26] hello.how to disable ipv6 .i do many commands but nothing change [13:27] Anyone here who can help me with a wireless problem? [13:27] nothing happens to my pidgin [13:27] theflower, sudo echo "blacklist ipv6" >> /etc/modprobe.d/blacklist.conf === twisted is now known as giskard2 [13:27] ma cristo di dio. [13:28] ./skype: No such file or directory [13:28] can anyone help me? [13:28] i already update my pidgin but still nothing happens [13:28] ops [13:28] Think that should be right.. [13:28] wrong channel dude [13:28] teragram: we wont know until you ask your actual question right [13:28] hsarci: wats up? [13:28] i already update my pidgin but still nothing happens [13:28] I want to execute this ""echo -n 230 > /sys/devices/platform/i8042/serio1/serio2/sensitivity" everytime I boot-up or resume from a suspend [13:28] any ideas? [13:29] Streetboys: Did you restart Pidgin after upgrading? Check the version in "Help -> About" [13:29] i install evolution 2.26 on ubuntu 9.10 i386 ltsp .but i want to remove it and install the evolution 2.22 which is much faster then 2.26 [13:29] hsarci, it would mean putting a script in /etc/power [13:29] for events.d and scripts.d [13:29] how can i replace the evolution 2.22 with evoltion 2.26 [13:29] yes i restart it [13:29] A quick google should help you there hsarci [13:29] hsarci: http://www.microsoft.com/windowsxp/pro/default.mspx thats what you need [13:30] momentum, Why be so ignorant? [13:30] ;) [13:30] People are only looking for help [13:30] momentum...eat two dicks [13:30] mmmm [13:30] Pidgin 2.4.1............ this is my pidgin version [13:30] !language | hsarci [13:30] hsarci: Please watch your language and topic to help keep this channel family friendly. [13:30] Streetboys: Well, the latest is 2.6.1 [13:30] how can i replace the evolution 2.22 with evoltion 2.26 [13:30] Streetboys: 2.6.2, even. [13:30] !ot | momentum [13:30] momentum: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics. Thanks! [13:30] i've already added the line to multiple scripts based on things ppl were saying on the net [13:31] so how can i update my pidgin to 2.6.2 [13:31] hsarci, it would have to go in /etc/power [13:31] theres infact, i page that explains all about changing thinkpad trackpoint sensativity and they say to put it in /etc/rc.local [13:31] hi, i want to play a video that my friend recorded in .avi format. should i use vlc or mplayer or a different software? [13:31] king, i will try that now thanks [13:31] Streetboys: I already pointed you to http://pidgin.im/download/ubuntu [13:31] im outa here. ignorance makes me violent. [13:32] From the command line, How can i get more info ona package? i.e. version numbers etc? [13:32] NozeRocket, apt-cache show packagename [13:32] i do that already but theres nothing happen, it seems that there is no update happen to my pidgin [13:32] joaopinto, thanks [13:33] joaopinto, Hopw do i see what version I have installed of say python on my machine? [13:33] jyxt: well yes, but it's a bit complicated, so i didn't want to go into it unless there was someone likely to be able to help [13:33] NozeRocket, apt-cache policy package [13:33] hi..how many ever windows i open, they are just floating, i have to drag and get the one i need to look at, how can i minimise and keep on the panel? [13:34] NozeRocket: dpkg -l | grep packagename === pretto_ is now known as Pretto [13:34] m2n [13:34] nic1: use the show desktop button [13:34] KingOverload: i do it but nothing change . i have pppoe connection [13:35] teragram: you wont know until you ask mate [13:35] ranjan, where do i find that showdesktop button? [13:35] nic1: you could alt+tab between [13:36] nic1: in the left corner of the panel dont u see a small button ..thats it [13:36] ya alt+tab is working, i just tried though, can't i minimise and dislay on panel than making them float? === bambam is now known as Guest96683 [13:37] nic1: click on it all active windows will get minimised [13:37] nic1: do you mean the window list on the bottom bar? [13:37] My wireless card detects the wlan, but *sometimes* fails to connect. I know the key is stored correctly, because it does connect sometimes. When it fails, it seems to spend a few minutes trying to connect and then pops up the dialog for entering the wlan key. === andreas_ is now known as TheNegotiator [13:38] anyone know how to fix full screen flash video from places like hulu.com [13:39] when not full screen the video is fluid, no stutters...when i go fullscreen it stutters...drops frames it seems like [13:39] linux newbie question - I created a raid volume using mdadm then did a mkfs.ext3 /dev/md0. I added a mount point - /media/raid - and in the /etc/fstabs I added '/dev/md0 /media/raid ext defaults 1 2' Now - it is only accessable as root. (atlast I think) I can see the raid volume but cannot write or do anything to it. (shows up in computer) [13:40] ubuntu 9.04 on an amd64 with flash plugin 10.0 r32 [13:40] Hi - I'm looking to install skype onto my dell mini with 8.04 ubuntu and when I run the package installer i get the following error message: "Error: Wrong architecture 'i386'" - Can anyone help me figure out what I can fix to get skype up and running please? Also, I'm a new user so commands/ advice needs to be given in simple terms!!! Thanks [13:40] skunkworks_: make folders inside the new volume and assing correct permissions to that folders [13:40] !addingfs | skunkworks_ [13:40] skunkworks_: If you are adding space to your Ubuntu installation mounting a newly created unix filesystem (ext3, xfs, jfs, etc) you can not set permissions (read, write, etc) filesystem-wide like you do when mounting filesystems that do not support unix permissions (vfat, ntfs, hfs, etc). See !permissions and !fstab [13:40] tazg: you are using 64 bit ubuntu isnt it [13:40] I think so, but how do I confirm [13:40] Thanks! [13:40] Will I be able to upgrade to new ubuntu in ternimal? [13:40] tazg: uname -a in a terminal [13:40] @indus: I think so, but how do I confirm [13:41] skunkworks_: you should specify ext2 or ext3 in fstab [13:41] erika2009: yes [13:41] indus: "uname -a"? [13:41] tazg: there is a 64 bit package of skype available now [13:41] no else has problems with full screen flash video's? [13:41] tazg: yeah === Grub is now known as Guest41427 [13:41] Jyxt: i do [13:41] erusul is it going to be update-manager -d command? [13:41] Jyxt: its choppy? [13:41] ranjan: sorry - did - that was a typo [13:41] indus: yes [13:41] indus: know a fix? [13:42] Indus: Remind me how to open the terminal again please... [13:42] tazg: main menu>accessories>terminal [13:42] Jyxt: try praying :) [13:42] !upgrade | erika2009 Please see this for the proper command(s) [13:42] erika2009 Please see this for the proper command(s): For upgrading, see the instructions at https://help.ubuntu.com/community/UpgradeNotes - see also http://www.ubuntu.com/getubuntu/upgrading [13:42] I always put a terminal icon on the panel :) [13:42] Jyxt: i mean, right clickand try disable /enable hardware acceleration [13:42] Dr_Willis: ditto [13:43] Dr_Willis: its my most used icon [13:43] !info update-manager-text | erika2009 [13:43] erika2009: update-manager-text (source: update-manager): Text application that manages apt updates. In component universe, is optional. Version 1:0.111.9 (jaunty), package size 36 kB, installed size 140 kB [13:43] indus: Linux user 2.6.24-19-lpia #1 SMP Tue Jul 29 14:02:05 UTC 2008 i686 GNU/Linux [13:43] skunkworks_: you can do it by adding parameters in the options section [13:43] tazg: ok u have 32 bit, i think you downloaded the wrong skype [13:44] helpful! [13:44] tazg: need the 32 bit skype [13:44] Indus: which one should I be looking for [13:44] tazg: regular 32 bit skype [13:44] can someone help me install my webcam? [13:44] erika2009: which webcam [13:44] indus: there's the 8.10 +32 bit skype, should I try that? [13:44] erika2009: plug it in.. test it with cheese? [13:44] tazg: yeah that one [13:45] indus: at the moment I am trying the bog std 8.04 version grrrrrr [13:45] erika2009: you should have softwares like cheese webcam booth [13:45] indus for compaq pressario a900 [13:45] for all the webcams ive tried.. either they work.. or they are totally unsupported. [13:45] Indus: ok wil try 8.10... let's hope! [13:45] cheese? is that a package? [13:45] erika2009: ya [13:45] erika2009: there is no such thing as a driver install for devices in linux generally speaking, you plug it in and use it [13:45] erika2009: if you run: lsusb you will get an 8 character hex ID you may get some luck with in websearches if cheese shows nothing [13:46] erika2009: what application are you using to test it? try cheese , try skype [13:46] its buit in [13:46] built* [13:46] erika2009: sudo apt-get install cheese [13:46] here's one for you's, does anyone know about any drivers i can use that let me use a VGA to RCA adaptor for my TV and output the right signa [13:46] * indus me [13:47] freenonde [13:47] its installed [13:47] allan8904: the various vga-tv adaptors ive seen dont need drivers.. You might have to set your moniotr/res to somthing the adaptor can handle. It may not be able to convert all the res's [13:48] erika2009: how do you know your webcam is not working? [13:48] it works! [13:48] :) [13:48] erika2009: wow :) [13:48] late comment [13:48] :D [13:48] lets see if i can webcam online.. :) [13:49] doesnt work online [13:49] only with cheese application [13:49] erika2009: learn to give more details. other then 'dosent work' [13:49] like with facebook in windows i can make a video but in linux the cam only works with cheese [13:49] erika2009: ya it wont work in facebook [13:50] erika2009: nor myspave [13:50] erika2009: at least not for me [13:50] erika2009: Flash webcam support i belive dosent work in linux. thats not a linux issue. I think.... [13:50] Theres other ways to chat then Facebook and web sites. :) [13:50] Dr_Willis: ah this isnt one of the "box" ones, this literally is a VGA adaptor with3 RCA cables comgni out of it and it says that you need manufacturer drivers supporting TVOUT through VGA [13:51] erika2009: when you right click on a flash element in a webpage a menu for flash appears you can choose configure there and a dialog appears with a tab for configuring the webcam. i dunno if that works becouse i do not have a webcam [13:52] Dr_Willis: interesting [13:52] allan8904: 3 rca cables? Hmm.. are 2 of those audio> or are You sure its not 3 'video' outs for the different colors. .like you see on some tv's [13:52] indus: sadly, still the same error message: "Error: Wrong architecture 'i386'" Grrrrr [13:52] tazg: ok then try the 64 bit [13:52] whatever they call those things.. my fancy DVD player has the 3 connectors.. [13:52] Dr_Willis: sorry yeah its the one with the yellow green and blue [13:52] Dr_Willis: all video [13:52] tazg: even though ur system says its 32 bit os [13:52] indus: will try grrrrr [13:52] allan8904: right. :) thats not the same as normal rca video out. or s-video [13:53] erUSUL: thats not how facebook works, it has a button which can be clicked to start webcam record, but in linux it wont find it [13:53] allan8904: when in doubt check google for that gizmo+linux see if others have used it. [13:53] indus: maybe facebook uses java not flash? it uses it for other things too [13:53] Dr_Willis ok thanks [13:54] erUSUL: It uses Flash. [13:54] erUSUL: no idea about that, but this feature wont work on facebook or myspace [13:54] erUSUL: in windows, it just grabs your webcam and starts recording [13:54] erUSUL: so i presume you dont use social networking sites :) [13:54] ok just shoting in the dark; all i see in the tab i mention is "no webcam found" bcouse i do not have any ;) [13:55] erUSUL: it says that even if you have one [13:55] indus: )o; Not working "Error: Wrong architecture 'amd64'! [13:55] indus: no; just irc for me. Too ugly to photo sharing sites ;P [13:55] tazg: ok ok strange indeed [13:55] Im constantly seeing people in her asking about getting webcams working with flash.. and ive seen very few answers to their questions. :) [13:55] erUSUL: iam antisocial :) [13:56] * Dr_Willis goes to the antiSocialNetworking Web sites [13:56] ok guys take a look at this guy tazg problem , uname -a says its 32 bit , but skype 32 bit complains about architecture [13:56] What is the best way to back up my home folder before trying out Karmic? [13:56] tazg: i think you again tried the 64 bit skype [13:56] indus: tazg why not just add medibuntu and install from there ? [13:56] tazg: which version of ubuntu is this [13:57] indus: yeh I tried all three versions [13:57] erUSUL: i was wondering that also. :) [13:57] tazg: try the skype static version [13:57] tazg: can u paste uname -a again please [13:57] indus: I tried the bog standard skype 8.04 and the two 8.10 version, nothing [13:57] Dr_Willis: great minds work alike XXDD [13:58] indus: Linux user 2.6.24-19-lpia #1 SMP Tue Jul 29 14:02:05 UTC 2008 i686 GNU/Linux [13:58] !backup | coffeej [13:58] so its a 32 bit system [13:58] coffeej: There are many ways to back your system up. Here's a few: https://help.ubuntu.com/community/BackupYourSystem , https://help.ubuntu.com/community/DuplicityBackupHowto , https://wiki.ubuntu.com/HomeUserBackup , https://help.ubuntu.com/community/MondoMindi - See also !sbackup and !cloning [13:58] i dont know why skype would complain [13:58] indus: yeh and I thinkit is the 8.04, anyway i can confirm? [13:58] coffeej: easier way to test karmic is to install karmic to a usb stick and boot from that (if your system can boot usb) [13:59] tazg: yea in terminal cat /etc/lsb-release [13:59] indus: i sent my netbook into dell to repair a month ago, operating system wasn't working as not enough hard drive (i have a little 4g machine) but skype was working before, now it isn't.... [13:59] ActionParsnip: [13:59] indus: ? [13:59] indus [13:59] test [13:59] !test | indus [13:59] indus: yes, I'm alive. [13:59] indus: DISTRIB_ID=Ubuntu [13:59] DISTRIB_RELEASE=8.04 [13:59] DISTRIB_CODENAME=hardy [13:59] DISTRIB_DESCRIPTION="Ubuntu 8.04.1" [13:59] tazg: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [14:00] tazg: ok its 8.04 32 bit [14:00] tazg: lsb_release -c is a single line ;) [14:00] ActionParsnip: Thanks. have it runnin on lappy w no issue but wanted to test desktop [14:00] FloodBot2: ok, sorry === cow_lg_pgen_cow is now known as cow_lg_pgen [14:00] coffeej: go for it dues [14:00] ActionParsnip: 686 is 32 bit right? [14:00] dude [14:00] indus: indeed [14:00] ActionParsnip: sorry new to this! [14:00] tazg: you are rocking it dude [14:00] ActionParsnip: ok i dont see any messages from coffeej how come you are replying to him? [14:01] * indus scratches head [14:01] aah sorry saw it [14:01] indus: i just got out of a meeting and looked at the channel [14:01] how do you do the *** thing? [14:01] / and me [14:01] allan8904: /me [14:01] ActionParsnip: problem is, i use the lappy, my wife uses the desk... with all her pics. Thanks for ignoring me indus ;) [14:01] allan8904: /me does something [14:01] coffeej: lol sorry didnt see [14:01] * allan8904 test [14:01] wow [14:02] awesome xD [14:02] indus: when I was on here last week, someone was telling me to "force architecture" or something along those lines, I couldn't run it as it asked for user password which I now know... [14:02] has anybody a lenovo sl500 ? [14:02] Hello. I use ati radeon 9700 on my laptop. How can I install it on jaunty? [14:02] tazg: ya force architecture is for installing 32 bit software on 64 bit os [14:02] indus: I seee [14:02] coffeej: well jaunty will be supported until Oct 2010 so no real rush if shes happy with what she has [14:02] tazg: sudo dpkg -i --force-architecture skype............ [14:03] allan8904: try /me [14:03] * indus waits [14:03] :D [14:03] indus: isnt skype in the medibuntu repo? [14:03] any webcam servers? [14:03] * uberspaced facepalms [14:03] yeah, but that's no fun! [14:03] whats a facepalm [14:03] ActionParsnip: skype was. haven't checked recently [14:03] * uberspaced double facepalms [14:03] lol [14:03] western terminology [14:04] indus: look at your palm then slap it on your face, then shout "d'oh" [14:04] * indus says namaste :) [14:04] Why is my wifi card not working in Karmic 9.10? Anyone have any ideas? [14:04] tazg: so whats the status [14:04] homoboy: try #ubuntu+1 [14:04] !karmic [14:04] Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [14:04] indus: k [14:05] indus: http://www.youtube.com/watch?v=A3KyXCBrAfg [14:05] is there a way I can set a specific PPA to update less often? [14:05] ActionParsnip: sorry, restricted acess [14:05] indus: how do I paste what it said? can't use the enter function? [14:05] !paste [14:05] For posting multi-line texts into the channel, please use http://paste.ubuntu.com (or !pastebinit for CLI) | For pasting !screenshots use http://tinyurl.com/imagebin Please give us the URLs for your posts! [14:05] ActionParsnip: btw, i downgraded the bios after we spoke yesterday, no go [14:05] !paste | tazg [14:05] tazg: please see above [14:05] indus: http://scienceblogs.com/insolence/facepalm.jpg [14:06] indus: bah [14:06] can one recommend a channel where i can get support with ipsec connections? [14:06] ActionParsnip: ok that one [14:06] indus: user@user:~$ sudo dpkg -i --force-architecture skype-ubuntu-intrepid_2.1.0.47-1_amd64.deb [sudo] password for user: dpkg: error processing skype-ubuntu-intrepid_2.1.0.47-1_amd64.deb (--install): cannot access archive: No such file or directory Errors were encountered while processing: skype-ubuntu-intrepid_2.1.0.47-1_amd64.deb user@user:~$ [14:06] lol [14:06] tazg: for all long messages , go to paste.ubuntu.com then paste it there, then write your name and press send, then copy url and paste here [14:07] indus: ok, noted! [14:07] tazg: is the file on the desktop? [14:07] tazg: is the deb file in ~/ or is it for example on the desktop? [14:07] tazg: if yes then in terminal cd Desktop [14:07] $cd Desktop [14:07] double facepalm: http://kevinchiu.org/emote/facepalm.jpg [14:08] indus/ actionparsnip: if i go to desktop it is there, then I double click to run package installer [14:08] Hello ! I have a laptop and ubuntu don't start in SATA AHCI mode. I push SATA ide and Start Well done, but I Push Sata AHCI Don't start... Can you help me ? [14:08] * indus facepoops [14:08] tazg: ok then run this command: cd ~/Desktop; sudo dpkg --force-all -i ./*.deb [14:08] how do i find out what version of KVM comes with ubuntu? [14:08] tazg: no double click wotn work [14:08] how do i find out what version of KVM comes with ubuntu 9.10? (sorry for the repost) [14:08] ActionParsnip: scary command :) [14:08] indus: gets stuff done [14:09] indus: and its a high level package so wont break the OS [14:09] ya tazg just cd to the desktop with cd command [14:09] i had my ICS working, then i restarted and now its not working [14:09] Hi, I am trying to install firefox 3.5 on hardy, I used a ppa but when I ran apt-get install I got " Sub-process /usr/bin/dpkg returned an error code (1)"...what should I do? [14:09] indus/ actionparsnip: http://paste.ubuntu.com/293941/ [14:09] indus, how can i check to see if bind9 is running? i thought i uninstalled it but since i restarted my ICS isnt working [14:10] azlon: you may need to bridge the links again, did you put the commands you ran in a script to re-establish te connection on a reboot [14:10] !ics [14:10] If you want to share the internet connection of your ubuntu machine with other machines in the network see https://help.ubuntu.com/community/InternetConnectionSharing - You may also use !firestarter: http://www.fs-security.com/docs/connection-sharing.php [14:10] azlon: pgrep named [14:10] !!bind sorry i dont knowanything about bind [14:10] Error: I am only a bot, please don't think I'm intelligent :) [14:10] tazg: ok then run: sudo apt-get -f install [14:10] sheldonh: aptitude show kvm | less [14:10] is there a way I can set a specific repository to update on a different interval or is this option only global? [14:10] uberspaced, its not running so how can i see what app is using port 53? [14:11] tazg: all of course [14:11] azlon: netstat -tulpn [14:11] as root [14:11] tazg: you need those libs it is talking about installing [14:11] _very_ handy command. [14:11] sheldonh: If you don't have an install of 9.10, search packages.ubuntu.com [14:11] ActionParsnip: there is somethinhg wrong here [14:11] ActionParsnip: his system is a 32 bit [14:11] tazg: did you double click on the 32 bit skype file or not [14:11] indus: thats what i thought, its very weird [14:11] uberspaced, that tells me there are apps using it but it doesnt say what app i using the port [14:11] Hello ! I have a laptop and ubuntu don't start in SATA AHCI mode ( in BIOS ). I push SATA ide ( In BIOS ) and Start Well done, but I Push Sata AHCI Don't start... Can you help me ? [14:11] indus/ actionparsnip: http://paste.ubuntu.com/293944/ (ps. he = she) [14:12] hello, i got a powr failure when i wanted to install nvidia drivers with jockey -- now i get this http://paste2.org/p/469901 - how do i force reinstall or fix of dkms ? [14:12] ya her sysstem is a 32 bit [14:12] tazg: sudo apt-get install ia32-libs [14:12] ActionParsnip: nooooooooo [14:12] indus/ actionparsnip: what are libs?! [14:12] ActionParsnip: ok that will tell for sure if that package is present :D [14:12] azlon: I'm confused. that command shows the process ID of the program holding the port open. [14:12] and you say you don't know what applications are using it? [14:13] tazg: just open a terminal and copy paste sudo apt-get install ia32-libs [14:13] asus901, it looks like you are saying that ubuntu both starts and don starts using AHCI, can you reprhase your question? [14:13] !gentoo [14:13] Other !Linux distributions besides !Ubuntu include: Debian, Mepis (using !APT); RedHat, Fedora, SUSE, Mandriva (using !RPM); Gentoo, Slackware (using other packaging systems) [14:13] uberspaced, ah, got it... now how can i get the name of the proccess from the process id? [14:13] tazg: libs are things that make apps work, they are shared between apps to make them smaller, some apps use libs that others do and you do not have to reinstall them as the already exist [14:13] azlon: it's RIGHT NEXT TO THE PID. [14:13] tazg: libs is libraries [14:13] indus/ actionparsnip: i'm running all this with the 64 bit package? should I be doing this with the 32 bit - or am i trying to force the wrong thing, taz is confused! [14:13] or you can do ps waux |grep PID [14:13] asus901: SATA controller must be configured in AHCI mode 'before' installing Ubuntu [14:13] tazg: your kernel is 32bit which is weird [14:13] tazg: yeah i think you are trying to install wrong skype [14:14] geirha: but i'm interested in the version of the kvm kernel module. can't find it in the linux-image changelog [14:14] Does any one have any experience using amdcccle, I'm trying to get dual screen one with resolution 1280x1024 and the other 1680x1050? [14:14] geirha: e.g. KVM-79, KVM-86 etc. [14:14] tazg: did you install this system? or you have a super nerdy boyfriend or husband or lady friend who did something [14:14] indus/ Actionparsnip: ok, will download 32 bit, then do I need to do all this shizzle again? [14:14] Ubuntu 9.04 with latest updates running under Virtualbox on a Mac: After a restart and first login, I go to System->Preferences->Windows and I get an error message: Cannot start the preferences application for your window manager; window manager "unknown" has not registered a configuration tool. Then after I logout and login, the Window manager is fine. So which file is NOT being launched on startup? [14:15] indus: none of the above, system came with dell mini 9 - piece of pooo* [14:15] tazg: ya download 32 bit , place it on desktop, then double click on it [14:15] tazg: should install like a breeze [14:15] tazg: really? dell sells pre-installed ubuntu? [14:15] tazg: also run: sudo dpkg -r skype [14:15] Jyxt: sure they do [14:15] I have been trying to run warsow on my laptop with ubuntu, I do not believe my video card is using the best drivers that it can use, as the game will not even run. I have an ati x1200 series card. I had the same problem with jaunty, and even did the suggested rollback fix on intrepid. I am on the koala beta now. [14:15] trijntje, my laptop it's new. The bios has two modes... SATA AHCI ( Fast access hard disk ) IDE Mode ( Normal ), When I push SATA AHCI Ubuntu crash in the start... When I push ide mode, start well. Can you help me ? [14:15] i G t g [14:16] i read about ubuntu pre-installed on a bunch of netbooks...but always some distro i'd never heard of [14:16] how can I run gpg-agent when logging in with gdm? [14:16] i need to solve one problem forpeace of mind [14:16] RanDom33: #warsow on irc.quakenet.org might be more help [14:16] tazg: please help me solve your problem :) [14:16] Jyxt: http://www.dell.com/content/topics/segtopic.aspx/linux_3x?c=us&l=en&cs=19 [14:16] * indus thinks he will facepalm ActionParsnip [14:16] asus901: yes, set Bios @ AHCI, and re-install ubuntu [14:16] haha. somebody's not getting it. [14:17] detrate, and they will tell me to ask here about getting the drivers setup right [14:17] OerHeks, I install ubuntu and in the bios SATA AHCI configured, reboot and don't start. Push ide mode start well... But I install in AHCI mode [14:17] uberspaced: true [14:17] How do i get the newest version of wine? when i add it, it gets to 1.0.1, but in need of the newest version. know i gotta go into source's etc, bt aint able to find out how. Any guides available? [14:17] indus: no, you don't facepalm others. you facepalm yourself. [14:17] uberspaced: D'oh! [14:17] asus901, i'm afraid not, I was just wondering what your exact issue was. [14:17] RanDom33: or give you a flag to pass the binary file [14:17] uberspaced: it was a joke dear [14:17] indus: didn't work! [14:17] http://paste.pocoo.org/show/145065/ error with the driver for the lenovo sl500. can someone help? [14:17] tazg: what error [14:17] Actionparsnip: ran that command [14:17] asus901 : you cannot change mode after install [14:17] ok trijntje [14:17] indus: understood. work on your comedy a bit ;) [14:18] tazg: dont run commands, just double click on file [14:18] * indus nods [14:18] OerHeks, I can change mode to ide and start well. But I like go well in SATA ACHI mode [14:18] indus: same error dude, same flippen error: "Error; Wrong architecture 'i368'", I ran AP's command re clearing out skype [14:18] sheldonh: Don't know. I get the impression it just follows the kernel version [14:18] ActionParsnip, ok... i rad the commands from the ICS tutorial again. still not working though. my other machines can't even ping this one [14:18] ActionParsnip: ok i dont get it, you try help him [14:18] indus: did double click hun, nothing! [14:18] ActionParsnip: her [14:19] good day and bye [14:19] tazg: are you trying to install an x86-64 package on a kernel running i386? [14:19] indus: thanks, toodles [14:19] Hello, I try to delete the home folder, because i want to remove it to an another partition but i get the error: „/home/benutzer/.gvfs“ Permission denied [14:19] asus901: 1 solution, set Bios @ AHCI, and re-install ubuntu [14:19] tazg: ok lets get skype ot for a start [14:19] tazg: post your uname -a for all to see [14:19] tazg: sudo dpkg -r skype [14:19] uberspaced: speak in simple terms hun, new user here === jmrodri-gone is now known as jmrodri [14:19] OerHeks, I install in set Bios AHCI and don't Start. [14:19] do what indus said. post uname -a [14:19] How can I configure my nic cards so that Static IP address work correctly? [14:20] LaireTM_ sudo rm -r folder [14:20] jontoer: same error [14:20] reya276: man interfaces [14:20] /etc/network/interfaces [14:20] jontore i mean [14:20] actionparsnip: http://paste.ubuntu.com/293953/ [14:20] uberspaced: will do [14:21] LaireTM_: it is a mount point. mount will show it as gvfs-fuse-daemon on /home/benutzer/.gvfs [14:21] OerHeks, something solution more ? [14:21] hey can anyone help me... i have ubuntu installed...but when i boot up now i get a message that no disk found though by BIOS settings detects my HDD...now i am in live session and i can see my files in my disk..i want to get booting up ubuntu dont without losing my data...any idea [14:21] uberspaced: oh I already configured that but I still don't any internet connection [14:21] uberspaced: Linux user 2.6.24-19-lpia #1 SMP Tue Jul 29 14:02:05 UTC 2008 i686 GNU/Linux [14:21] Uqbar: i unmountet the home folder [14:21] LaireTM_: you have to log out and let gvfs-fuse-daemon die [14:21] reya276: /etc/init.d/networking restart [14:22] uberspaced: did that too [14:22] if that doesn't do it then you've something wrong. [14:22] and nothing [14:22] mess around with networking in gnome. try to see if you have connectivity on another box etc. [14:22] Uqbar: Im loged out and at the command promt as root@ [14:22] OerHeks, there are something driver for ubuntu can know Sata ahci ? [14:22] i worked it out [14:22] start investigating... [14:22] ActionParsnip: maybe its an ubuntu netbook remix [14:22] package architecture (amd64) does not match system (lpia) [14:22] ActionParsnip: excellent [14:22] LaireTM_: is gvfs-fuse-daemon still running? [14:22] so fix away [14:22] asus901 : what brand and type laptop do you have ? [14:22] i got some stuff to fix [14:23] Uqbar: how i test that? [14:23] indus/ actionparsnip: you referring to me? you figured it out? [14:23] he did [14:23] LaireTM_: ps -ef | grep g\\vfs-fuse [14:23] indus/ actionparsnip: the 'amd64' error [14:23] yyou need to rename the package [14:24] showed when i tried to run the 64 bit version, when I run the std version or 32 bit version i get the 'i386' error... [14:24] OerHeks, Packard bell butterfly 11'6" with core2solo precessor SU3500 and intel 4500MHD [14:24] hey can anyone help me... i have ubuntu installed...but when i boot up now i get a message that no disk found though by BIOS settings detects my HDD...now i am in live session and i can see my files in my disk..i want to get booting up ubuntu without losing my data...any idea [14:24] there is an entrie with the username [14:24] LaireTM_: kill it. [14:24] uberspaced: one more thing, I removed network-manager and network-manager-gnome [14:24] ActionParsnip; any idea [14:24] asus901: ah that is a new laptop, SU3500 [14:25] tazg: difficult but works http://ubuntuforums.org/showthread.php?t=962835 [14:25] queryboy, first make a backup of all your important data [14:25] tazg: you have a diff version of ubuntu special for your machine [14:25] queryboy, then try to find out how to fix it ;) [14:25] queryboy: 1. make sure that disk the bootloader is on is in the boot sequence in your bios [14:25] yes OerHeks it's new laptop [14:25] tazg: wait iam searchign\ [14:26] !french [14:26] Ce canal est en anglais uniquement. Si vous avez besoin d'aide ou voulez discuter en francais, merci de rejoindre #ubuntu-fr [14:26] trijntje; i have over 30GB of important data that i dont wanna lose...but i dont have any external device [14:26] tazg: ok found it, use skype static from the website [14:26] uberspaced; the HDD is to boot up first [14:26] tazg: ignore previous messages , you need the skype static package from website, then you can install it [14:27] indus: ok so I follow those forum instructions with the standard 8.04 version? [14:27] queryboy: did you have any type of other writable media plugged in when you installed ubuntu? [14:27] tazg:no no ignore them [14:27] tazg: in skype site, there is a download called skype static [14:27] indus: skype static? not 8.04? ok will look [14:27] Hello [14:28] queryboy: it may be time for you to learn about boot partitions and installing grub :-/ [14:28] hi [14:28] uberspaced; yes i had another disk of my friends'...my grub failed then and when i restored the grub the disk was connected...now the disk isn't with me [14:28] OerHeks, Something solution for me ? [14:28] indus: ok i see it, will download [14:28] tazg: yes its there , look a little below [14:28] queryboy: and that didn't strike you as having the ability to cause problems? [14:28] indus: then do I double click on that to install? [14:28] queryboy: boot up into rescue mode [14:28] I can't install libpcre3-dev package.. I got this error message : The following packages have unmet dependencies: [14:28] libpcre3-dev: Depends: libpcre3 (= 7.4-1ubuntu2) but 7.4-1ubuntu2.1 is to be installed [14:28] E: Broken packages [14:28] tazg: but before that try the force architecture with the 32 bit skype i hear it works too [14:28] what can I do to solve this ? [14:29] tazg: http://forum.skype.com/index.php?showtopic=220791 [14:29] learn how to do a grub -i /dev/hd[whatever] or /dev/sd[whatever] [14:29] figure out what hd gets mounted in rescue mode by typing mount [14:29] hey, I just installed a windows program using Wine and when I go to click the program to launch it, absolutely nothing happens [14:29] tazg: open a terminal [14:29] indus: confused hun, ok so I need to download the 32 bit skype and try the commands from above to force it, if that doesn't work then try static version? [14:29] does anyone know what might be the problem? === SIGSEGV is now known as pjm0616 [14:29] http://ubuntuforums.org/showthread.php?t=224351 [14:29] i cant for the life of me figure out why my other machines cant ping this one [14:29] queryboy: maybe that will help ^^ [14:29] tazg: u already have 32 bit downloaded on desktop? [14:30] uberspaced; it striked me as i was explaining to you...now how do i get into a rescue [14:30] azlon: basic networking debugging [14:30] tazg: open terminal and type cd Desktop [14:30] tazg: then type sudo dpkg -i --force-architecture skype-debian_2.0.0.72-1_i386.deb [14:30] azlon: can you ping yourself? [14:30] queryboy: that page supposedly describes how to install grub using the live cd. [14:30] asus901: shouldn't you use UNR ubuntu netbook remix ? [14:30] tazg: if this fails with error, just go ahead with the static version, it will work but the installation is different [14:30] I know enough internals to not have to read that stuff. figure out if it does what you need. [14:30] no OerHeks [14:30] indus: ok hold up, open terminal. done [14:30] tazg: ill be back later [14:30] I used normal ubuntu desktop [14:30] tazg: cd Desktop [14:31] full and normal ubuntu [14:31] uberspaced, you're a f'n genius! my stupid ip keeps defaulting back to 192.168.0.32 instead of 192.168.0.1. where is this set so i can change it? [14:31] azlon: can you: ping yourself? ping your gateway? is your netmask correct? does ifconfig show the device configured? [14:31] indus: i'm not trying the debian package though, i'm tring the hardy or intrepid ones? [14:31] tazg: hello? [14:31] I'm tried updating, upgrading, -f install and autoclean but the problem [14:31] persists.I'm tried updating, upgrading, -f install and autoclean but the problem persists. [14:32] azlon: sorry. my stuff keeps scrolling [14:32] azlon: /etc/network/interfaces [14:32] tazg: yah try hardy or intrepid [14:32] asus901: try install with bios @ AHCI + 'no acpi' option when installing [14:32] indus: ok [14:32] azlon: man interfaces <====== [14:32] indus: go if you have to, will ask someone else, sorry! [14:32] tazg: i have 1 min [14:33] tazg: did u do cd Desktop? [14:33] tazg: i assume the 32 bit skype is on desktop [14:33] uberspaced; i saw a message stating that it succeeded...will reboot now [14:33] queryboy: otoh, if you're having this many problems with configuring grub, you may just want to reinstall. It all depends on how good you're willing to get with this stuff in a short period of time. [14:33] OerHeks, when I make the installation, in my bios there are SATA AHCI mode. [14:33] queryboy: if it works, YAY. [14:34] uberspaced; ya...i would be glad...else i'll mess tomorrows exam [14:34] yes, set it on AHCI, not IDE [14:34] Take0n :) [14:34] hello :) [14:34] queryboy: you may have to edit menu.lst or whatever. I don't know if that document recommends tweakage on it. [14:34] hey [14:34] I have an extra partition mounted as ~/extraspace. This is set up in fstab. Why does the partition also show on my desktop? I want only removable drives like usb drives to show on the desktop. Can anyone help? Thanks [14:35] indus: yes 32 bit on desktop, http://paste.ubuntu.com/293963/ [14:35] hello [14:35] * Briareos1 needs help with ipsec/vpn :( [14:35] i need someone to help me with devices [14:35] JonathanEllis: in your /etc/fstab do you actually have ~extraspace or /home//extraspace === raidO is now known as raid0 [14:36] OerHeks, I say that... the installation ubuntu make with SATA AHCI mode ON and SATA IDE mode OFF. [14:36] JonathanEllis: also, does mount -a show any errors? [14:37] asus901 : that doesn't work, istalling you said: so try again, with noacpi option as kernel boot mode [14:37] geirha: thanks. someone on #kvm has explained the shift in numbering. kvm-XX has become qemu-kvm-0.X.Y :) [14:37] uberspaced: I have it mounted as /home//extraspace [14:37] does anyone know about mapping a device to a certain file in /dev/ [14:37] uh, ok. and the device, under gnome or whatever still shows up on the desktop? [14:38] hi. since kernel 2.3.30 (jaunty) / 2.3.31 my mouse cursor stops reacting all the time when the mouse is not moved for a few seconds. About a second after i move i again the curser reacts to my movements. any ideas? [14:38] krey: what type of device? [14:38] hdd [14:38] OerHeks, donesn't work the start. When go to start after bar of ubuntu go to black screen... [14:38] uberspaced: Mount -a does not show errors [14:38] krey: is it usb or IDE? [14:38] usb [14:38] that's why i need it mapped [14:38] Hi, all, anyone familiar with Ankermann computers, just about to buy one, wondered how Ubuntu fairs on them? [14:39] Hi, can someone help me upgrading the kernel on usb stick live system. I can do apt-get install almost everything, but can't compile the kernel, and can't do dist-upgrade or upgrade. There must be a way to change kernel somehow. Thx!!! [14:39] JonathanEllis: then your question is more like "Why does gnome still put stupid icons on my desktop for removable devices that are already mounted" [14:39] and I have no idea./ [14:39] OerHeks, but i push sata ide mode start well done and go to desktop ubuntu [14:39] krey: another handy trick: watch "ls /dev |grep sd" [14:39] you can also specify mount points by file system id. [14:39] I love icons [14:39] I forget what specific file maps usb ids to dev IDS [14:39] uberspaced: Actually its not a removable device anyway. It is a partition on my primary hard drive [14:39] why would that help me? [14:39] Ankerman pc's anyone? [14:40] has anyone found anything like timevault/flyback that can do real time backups in jaunty/karmic? [14:40] asus901: that is normal, if you installed in IDE mode, did you try to re-install in AHCI mode ? you cannot change modes after install [14:40] OerHeks, in bios SATA AHCI and I install ubuntu. ALL Fine. But in the reboot, don't start. After intallation push ide mode start well done. [14:40] i want the drive to be mapped to the same device, even if i plug it in to a different port [14:41] OerHeks, no no no... I install in sata ahci mode. [14:41] krey: Why do you need to do that? [14:41] oke, clear :-) .. [14:41] raid [14:41] did you update yet, in IDE mode ? [14:41] krey: Have you tried using UUIDs, for example? [14:41] yeah, that's what i want to do [14:41] but i don't know where/how [14:41] OerHeks, I install in SATA AHCI mode but don't start well, only start in ide mode. Why ? this is my question... [14:42] krey: use UUID of that disk and create a udev-rule [14:42] ok [14:42] krey: ls /dev/disk/by-uuid/ [14:42] yes OerHeks I update and safe-upgrade all in ide mode, no problem.... ubuntu go well [14:42] krey: ls -l, actually [14:42] but I like used in Sata ahci mode. [14:43] so i can access my devices by uuid aswell! [14:43] this was very helpful [14:43] thank you [14:44] krey: There's also /dev/disk/by-label/, but it isn't as reliable. [14:44] anyone using a nvid gtx 260 card on here? === geo is now known as geo05 [14:44] krey: Anyway, both labels and UUIDs are supported in fstab, in grub's menu.lst, in many other places. [14:44] thx guys, bye [14:45] Help please: trying to install Skype static on dell mini 9 ubuntu 8.04 - have run via archive manager, now where do i go? (warning: new ubuntu user here! simple terms please) === Guest69399 is now known as DannyButterman [14:46] OerHeks, something solution ? [14:46] tazg: Hold on. I think there may be an easier way to install skype from a repository. I will check [14:47] tazg, just installl the skype .deb [14:47] Guys/girls, about to buy this pc, anyone see probs with Ubuntu? http://tinyurl.com/yhozr3e [14:47] !skype [14:47] To install Skype on Ubuntu, see https://help.ubuntu.com/community/Skype - To record on Skype, check: https://wiki.ubuntu.com/SkypeRecordingHowto - Please use open protocols instead if you can, see !Ekiga [14:47] d65100, check the hcl [14:47] ubottu: noted. thanks. [14:47] Sorry, I don't know anything about noted. thanks. [14:47] !hcl | d65100 [14:47] d65100: For lists of supported hardware on Ubuntu see https://wiki.ubuntu.com/HardwareSupport - To help debugging and improving hardware detection, see https://wiki.ubuntu.com/DebuggingHardwareDetection [14:47] not there I think [14:48] hello everybody am back [14:48] ty [14:49] tazg: You can install skype from the medibuntu repository if you add it. Here is info on Medibuntu https://help.ubuntu.com/community/Medibuntu. [14:49] !install | tazg [14:49] tazg: Ubuntu can be installed in lots of ways. Please see https://help.ubuntu.com/community/Installation for documentation. Problems during install? See https://wiki.ubuntu.com/CommonProblemsInstall and https://wiki.ubuntu.com/DapperReleaseNotes/UbiquityKnownIssues - Don't want to use a CD? Try http://tinyurl.com/3exghs - See also !automate [14:49] asus901 iḿ looking on info, all i find is: if AHCI gives you problems turn it off, but i don't like that answer .. [14:49] usb autosuspend seems to be broken in 2.6.30 / 31 with some input devices... is there a workaround besides turning autosuspend off? [14:49] tazg: Follow thoes instructions first and if you have trouble, give me a shout [14:50] OerHeks, I read that ahci mode its supported in ubuntu. [14:50] gtx260 not on the list, but Ubuntu should install though heh? [14:51] the pc comes without OS you see [14:51] hi all still didn't got a response for my big problem [14:51] The following packages have unmet dependencies: [14:51] libpcre3-dev: Depends: libpcre3 (= 7.6-2.1ubuntu1) but 7.8-2ubuntu1~intrepid1~ppa1 is to be installed [14:51] Depends: libpcrecpp0 (= 7.6-2.1ubuntu1) but 7.8-2ubuntu1~intrepid1~ppa1 is to be installed [14:51] E: Broken packages [14:51] Dumb0: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [14:51] k [14:51] next time [14:54] OerHeks, thanks you for your help. I go to work... in the night I return here. For possible solution. Thanks for all. [14:55] asus901: good luck, iĺl keep reading [14:55] thanks OerHeks [14:56] bye === decomp_away is now known as decomp === Nick is now known as Guest36724 [14:56] Hi! I have a file called "TRANS.x". When I run the file from one directory, it works. But running it from another directory I get segmentation fault. What could be wrong? [14:56] would it be possible to run a wikipedia on your localhost . ie by installing mediawiki and then pasting the wikipedia database in to my wiki database [14:57] Yure: "Pasting" isn't the right term - but yes, it's possible to do that. [14:57] Yure: And that's what MediaWiki is for, mostly. [14:57] What is the website or guideline for newbie of ubuntu? [14:58] !wiki | hehehe [14:58] hehehe: http://wiki.ubuntu.com - Ubuntu development documentation wiki. If you are looking for system help, please refer to https://help.ubuntu.com/community - the Ubuntu community documentation. === naruto is now known as Guest81384 === Guest36724 is now known as Xyzzy [14:58] with apt-get remove, can i hint that the conflict resolver should favour removal of dependencies? [14:58] grawity : I googled , made a yahoo search but can't find anyone who is being successful in doing so . Any ideas [14:58] http://www.ubuntupocketguide.com/ hehehe [14:58] Thanks guys [14:59] Yure: http://swingleydev.com/blog/?p=41 for one. [14:59] Yure: http://mattwj2005.squarespace.com/imported-data/2008/4/11/making-your-own-local-wikipedia-mirror.html is another. [15:00] exit [15:00] what partition table does ubuntu use? [15:00] Sirisian_: Usually, 'msdos' (to remain compatible with hundreds of other OSes) [15:00] grawity : oh , thanks . I think I have to install all the extensions wikipedia has then [15:00] LOL [15:01] ah okay [15:01] when i install ubuntu over netinstall, will / can i get still the server kernel? [15:01] hi everyone [15:01] im searching for a little player like winamp [15:02] jacquesdupontd: try audacious [15:02] like beep player but seems to be stopped [15:02] Sirisian_: But it's possible to use, for example, 'gpt' (PCs with EFI use it), or the Apple partition table - as long as both the bootloader and kernel support it. [15:02] jacquesdupontd try songbird [15:02] ThDoctor_, i want something really light [15:02] Sirisian_, use ext3 or ext4, but almost all others are useful: reiserfs, xfs, ...etc. [15:02] songbird [15:02] ok [15:02] jacquesdupontd: mpd (with sonata, ario, gmpc) [15:02] jacquesdupontd: Also, audacious, muse, quodlibet [15:02] jacquesdupontd yeah, its not in the cache, ill give you the site in a sec [15:03] perfect [15:03] jacquesdupontd www.getsongbird.com [15:03] jacquesdupontd: I myself use mpd - it runs as a daemon, and there are several clients to control it. [15:03] ga [15:03] sorry [15:03] nerdy_kid: He wanted a _little_ player. [15:03] you understand i'm not searching an itune big shit just something light to put some playlist easily with maybe an add to playlist right click option [15:04] grawity, what can I do for that : http://ubuntuforums.org/showthread.php?t=1038361 === kostas_thess is now known as Scripting [15:04] grawity, this one could be interesting if i wanna control playlist from other computers, i'll check it too [15:04] grawity he wanted a winamp like player - the latest winamps arent little, besides songbird has a mini mode [15:04] thx btw everyone to help me so fast :) [15:04] nerdy_kid: I guess he meant Winamp 2.x-like. [15:05] yep [15:05] grawity is true [15:05] ok then not songbird, even though id still give it a try [15:05] I read one site that installing these packages "aptitude install linux-headers-server linux-image-server linux-server" is possible ubuntu 32 bits "see" 4GB. Is good idea to use ? [15:05] it's not really the fact that it has to be little, but just simple as the first winamp, a bit beautiful and using the less ressources [15:05] jacquesdupontd: Yeah, mpd lets you do that. I know these clients, but there are many more: mpc for command-line, ncmpc is terminal-based but has menus, sonata/ario/gmpc are nice in GNOME. (There are clients for Qt (KDE) too, and even web-based interfaces. Ario runs on Windows.) [15:06] jacquesdupontd: If you decide that mpd is not for you, then Muse and QuodLibet are small too. [15:06] jacquesdupontd: i like beep media player (bmp) personally i stil use xmms though :) [15:06] that's why grawity when you talk about this daemon won't it take too much ressources ? [15:06] pepperjack, they have been followed [15:06] jacquesdupontd: mpd (the daemon itself) is very light. [15:06] jacquesdupontd: And most of its clients are small too,. [15:07] i am the most stupid person ever [15:07] Hi, can someone help me upgrading the kernel on usb stick live system. I can do apt-get install almost everything, but can't compile the kernel, and can't do dist-upgrade or upgrade. There must be a way to change kernel somehow. Thx!!! [15:07] ubottu, mpd [15:07] Sorry, I don't know anything about mpd [15:07] pepperjack: xmms isn't developed anymore, AFAIK... it's now Audacious or something like that. [15:07] ubottu, muse [15:07] Sorry, I don't know anything about muse [15:07] just ran mv /*/*/*/ ./ lol [15:07] ubottu, QuodLibet [15:07] Sorry, I don't know anything about QuodLibet [15:07] jacquesdupontd: http://ubuntuforums.org/showthread.php?t=5194 and http://ubuntuforums.org/showthread.php?t=75795 [15:07] stupid you :) [15:07] jacquesdupontd, please /msg ubottu info package [15:07] yeah still works for my puropses though.. last time i tried mpd i rebooted a week later and scared myself to death when alice in chains starting blaring out of the speakers [15:08] grawity, thx for mdp will be usefull for many other things i have to install in my work but i'm using direct access to computers usually === j is now known as Guest46108 [15:08] sou do brasil [15:09] !br | Guest46108 [15:09] Guest46108: Por favor, use #ubuntu-br para ajuda em português. Obrigado. [15:09] Kamaze: yes [15:09] jacquesdupontd: mpd is light because you can close the GUI (client) anytime, and the music will still play. [15:09] how do i set up java plugin in mozilla with 64 i already have java installed [15:09] Kamaze: there will be multiple entries in your /boot/grub/menu.lst for each kernel [15:09] k, understood [15:10] sou leiga no ubuntu [15:10] how can i find out what port my modem is on? like /dev/ttyUSB0? i tried "dmesg | grep tty" but it didnt return anything [15:10] grawity, ok now if i want an exactly looking like winamp 2.x player there's only beep (that i can't find anymore) or xmms ? [15:10] jacquesdupontd: audacious [15:11] ok thx [15:11] ubottu, debian [15:11] Ubuntu and Debian are closely related. Ubuntu builds on the foundations of Debian architecture and infrastructure, with a different community and release process. See http://www.ubuntu.com/ubuntu/relationship - Remember, !repositories meant for Debian should NOT be used on Ubuntu! === TheNegotiator_ is now known as EssenGeher === EssenGeher is now known as KuchenEssenGeher [15:14] grawity, thx audacious seems to be perfect but the thing is that it seems it needs something more to play mp3 format song [15:14] lame maybe ? [15:14] jacquesdupontd: lame is an encoder, AFAIK. [15:14] usava windows [15:14] jacquesdupontd: I do know that many players use gstreamer for decoding, maybe you need gstreamer plugins? [15:14] grawity, but just weird that it can't read the song [15:14] My custom keyboard layout (xmodmap) has stopped working in virtualbox. Any ideas how to fix it? (I have tried google :)) === Scripting is now known as Kostas_thess [15:15] grawity, i was thinking i was having it gonna check that [15:15] I got some problems with AppArmor it's seems it is not loading [15:15] my dmesg is being flooded with things like: "[ 5790.440465] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:19:66:8a:80:17:08:00 SRC=192.168.0.120 DST=192.168.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=16497 PROTO=UDP SPT=137 DPT=137 LEN=58 " [15:15] is there any way to prevent this? [15:15] hello ewery bodi :-D ... [15:16] hahaha [15:16] azlon: if you don't know how to handle iptables-logs, disable it [15:16] this stupid thing was just on pulse [15:16] llutz, how do i disable it? [15:16] azlon: man iptables [15:16] how can totally remove pulse so i can't select it in different audio menu application ? [15:16] azlon: one of your rules is doing the logging [15:16] just delete said rule [15:16] freenode [] [15:16] 15:22 < obiwan__> hey, i'm interested too in why you said ##freebasic with 2 sharps, some channels like ##mac got two too, and some ones like #ubuntu just one, is there any special resason? [15:16] does anyone know how to enable AppArmor, wheb I wanted to install MySQL i found out about the problem [15:17] hello... i am still unable to boot into my ubuntu [15:17] azlon: do iptables -L === darko is now known as Guest13011 [15:17] and look for any lines with LOG --log-prefix blah blah blah [15:17] obiwan__: ## is unofficial and # is official channel [15:18] and delete those lines from your ruleset [15:18] does anyone know how to enable AppArmor, wheb I wanted to install MySQL i found out about the problem [15:18] grawity, cause it seems a apt-get remove --purge pulseaudio isn't sufficient [15:18] Jyxt, that is bringing up a ton of information... do you want me to pastebin it? [15:18] does anyone know how to enable AppArmor, wheb I wanted to install MySQL i found out about the problem that my AppArmor failed to load [15:18] obiwan__: 2 ## does not take away from the amount of help you can recieve though [15:19] azlon: no...want you to look through it and find any rules with LOG --log-prefix and delete those rules [15:19] Jyxt, ok, looking [15:19] Jyxt, when i find one, how do i edit my ruleset? [15:21] azlon: hrm...probably better to do it from a file === BlackJack is now known as Dreaman [15:21] do iptables-save > iptables.rules [15:22] then edit that file and delete the appropriate lines...then do iptables-restore iptables.rules [15:22] /etc/init.d/iptables/save [15:22] might need to prefix the commands with sudo...sudo iptables-save > iptables.rules [15:22] sudo nano iptables.rules [15:22] sudo iptables-restore iptables.rules && /etc/init.d/iptables save [15:22] Jyxt, bash: iptables.rules: Permission denied [15:23] Jyxt, i did use sudo... [15:23] ubuntu.com says i need the alternate installer for RAID and LVM support. does the server installer support RAID and LVM? [15:23] sudo iptables-restore iptables.rules && /etc/init.d/iptables save [15:24] sudo iptables-restore iptables.rules && sudo /etc/init.d/iptables save [15:24] ^^ 2nd sudo missing [15:24] azlon: do sudo iptables-save > iptables.rules && sudo nano iptables.rules [15:24] Jyxt, i had to be root === Guest12511 is now known as fahadsadah [15:25] does anyone know how to enable AppArmor, wheb I wanted to install MySQL i found out about the problem that my AppArmor failed to load [15:25] Jyxt, is there any way to just comment it out instead of deleting it? [15:25] azlon: yeah you can comment...use # [15:27] hi [15:27] hi [15:29] ubottu, info audacious [15:29] i have a set of files, is there an easy way to change the extension on them? i tried "mv file*.html file*.php" but it failed, any ideas? [15:29] ubottu, audacious [15:29] Sorry, I don't know anything about audacious === brb is now known as Guest80238 [15:30] ubottu, info package audacious [15:30] resno: use "rename" [15:30] Hey, how do I downgrade from 9.10 to 9.04? [15:30] !downgrade | Kristinn [15:30] Kristinn: Attempting to downgrade to an older Ubuntu version is explicitly not supported, and may break your system. [15:30] how to install yahoo messenger in ubuntu? [15:30] Kristinn: better to ask #ubuntu+1 how to fix your problem probably [15:30] Guest80238: Use Pidgin ? [15:30] Oh, :( I only wanted my audio back :'( [15:30] Jyxt, -bash: /etc/init.d/iptables/save: No such file or directory [15:31] resno: for old in *.html; do cp $old `basename $old .html`.php; done [15:31] should do it [15:31] tell me about yahoo plz......... [15:31] azlon: try /etc/init.d/iptables save [15:31] space between iptables & save not a / [15:31] Hi, can someone help me upgrading the kernel on usb stick live system. I can do apt-get install almost everything, but can't compile the kernel, and can't do dist-upgrade or upgrade. There must be a way to change kernel somehow. Thx... [15:31] /etc/init.d/iptables [15:31] Jyxt, -bash: /etc/init.d/iptables: No such file or directory [15:31] incidence:please help me......... [15:32] azlon: hrm...i am a gentoo user, not sure where ubuntu keeps that script [15:32] apt-get install iptables\ [15:32] !iptables > Jyxt, azlon [15:32] apt-get install iptables [15:32] Guest80238: Applications -> Internet -> Pidgin [15:32] ack [15:32] azlon: sudo iptables-restore iptables.rules should be good enough [15:32] !iptables | Jyxt, azlon [15:32] Jyxt, azlon: Ubuntu, like any other linux distribution, has firewall capabilities built-in. The firewall is managed using the 'ufw' command (see https://help.ubuntu.com/community/Uncomplicated_Firewall_ufw), or 'iptables' (https://help.ubuntu.com/community/IptablesHowTo). GUI applications such as Firestarter/Gufw (Gnome) or Guarddog (KDE) also exist [15:32] to update your ruleset [15:32] i dont see pidgin ............. [15:33] Jyxt, thanks [15:33] though ubuntu does some crazy stuff on reboots with iptables...read this link https://help.ubuntu.com/community/IptablesHowTo [15:33] towards the bottom there it details info about how to maintain your ruleset across reboots etc [15:33] Guest80238: Alt + F2 -> pidgin -> enter ? [15:34] azlon: personally i always dump the current rules to a file, edit the file...then update the iptables off teh file...i knwo that guide suggests doing it all via the commandline [15:34] * Jyxt shrugs [15:35] Jyxt: i entered that into termianl how do i execute it? [15:35] azlon: I agree with Jyxt, it's much easier to save the file and edit (the bottom of the guide should explain that too) [15:35] Hey, i have a problem; when my comp was running electricity went out - now when i try to start system it goes to console saying [initramfs], i guess my boot sequence/grub is broken. I tryed a few grub commands i found on internet but everytime i type them - console says "grub: Not found". [15:35] any ideas how to fix it? [15:35] resno: press enter and it should run? [15:36] how do i change the timezone in ubuntu? [15:36] tzconfig [15:36] Jyxt, how can i find what port my USB modem is on? i think it is on /dev/ttyUSB0 but im not sure [15:36] Jyxt: when i enter it it takes me to ">" and i have to ctrl -c to break out [15:36] zamba: right click on the clock [15:36] zamba, click your date/time, then locations then edit [15:37] resno: did you copy/paste exactly...notice the ` and not ' [15:37] The other day, I installed a firefox plugin. It asked me to restart firefox. I did, while some windows were open. Now every time I open firefox, multiple windows open up including some that say 'progress' in the title bar. They all have blank crashed screens. I tried restarting but it did not fix the problem. How do I get firefox back? (preferrably without uninstalling) [15:37] azlon: good question...never used a usb modem so thats beyond me :P [15:37] Jyxt: this is what i ran "for old in *.html; do cp $old `basename $old .html`.php; " [15:37] resno: last thing is done [15:38] for old in *.html; do cp $old `basename $old .html`.php; [15:38] done [15:38] Jyxt: oh, you need done? [15:38] hey everyone, is it normal that I keep getting partial upgrades when running karmic? [15:38] anybody know how i can find what port my usb modem is on? [15:38] Sutibu: #ubuntu+1 for karmic [15:39] sclimans, turf off crash reporting [15:39] azlon: check "dmesg" [15:39] Jyxt: what language is this? [15:39] where, how? [15:39] yeah anyway the last part should look like .php; done [15:39] resno: bash? [15:39] can put in file or run from command line [15:39] Jyxt: ah, thats what i thought. the done was the missing componenet. [15:39] llutz, i was going to do that buy my dmesg was flooded with my iptables... is there a system log i could check? [15:40] azlon: check "dmesg|less" === zwamkat_ is now known as zwamkat [15:40] Jyxt: thanks for your help. [15:40] resno: np [15:40] sclimans: check about:config and look for browser.sessionstore.resume_from_crash and Change that value to ‘false’ [15:41] Any dreamlinux user/project member here? Or Eee-Ubuntu? [15:41] SidGBF: just ask your ubuntu-related support question [15:41] llutz, its all iptable stuff... even with |less [15:41] How do I view hidden files in ubuntu? [15:41] sidGDf what your question [15:41] sclimans: ctrl-h or view -> show hidden files [15:41] azlon: less /var/log/messages [15:41] azlon: did it work? taking the logging stuff out of the iptables? [15:42] jrib: It is compatibility/usability related [15:42] Jyxt, yeah... its not adding to dmesg any more, but the log that i was looking for is no longer in dmesg because all the previous logs [15:42] hi, whats the difference between a .04 and .10 release? [15:42] does anyone know how i could rip flash off a website like http://www.rte.ie/player/#v=1057600 ? [15:42] SidGBF: so just ask it. [15:42] keith1: 6 months [15:43] Pici: ah thanks [15:43] azlon: ahh...hehe try what llutz suggested? [15:43] keith1: Ubuntu version numbers are based off the year and month of release. 9.04 was released in 2009, April. [15:44] Oh wow I never noticed that version 9 is also year 2009 [15:44] jjjjjj [15:44] heheh brilliant [15:44] jrib: how many disk remains in EeePC 701 using EeeUbuntu? [15:44] SidGBF: ask the channel, not me [15:44] SidGBF: though eeeubuntu isn't ubuntu, so you should ask their support channel [15:44] where do I find firefox's about:config file? === Andre_Gondim is now known as Andre_Gondim-afk [15:45] !away > Andre_Gondim-afk [15:45] Andre_Gondim-afk, please see my private message [15:45] Jyxt, llutz, got it... didnt help me since it was where i thought it was located [15:45] brb... maybe it will help if i am disconnected [15:45] Hey, i have a problem; i am using ubuntu and when my comp was running electricity went out - now when i try to start system it goes to console saying [initramfs], i guess my boot sequence is broken. I tryed a few grub commands i found on internet but everytime i type them - console says "grub: Not found". [15:45] can you help me? [15:46] Can anyone tell me where to find the about:config file for firefox? [15:46] Scooler: grub what not found? theres usually an error number? [15:46] sclimans: ~/.mozilla/firefox/your-profile/prefs.js or user.js [15:46] Well, it doesn't give me any number [15:47] only when kernel panic appears [15:47] The "scanning mirrors" thing on the alternate install, is it supposed to take a half hour? [15:47] sclimans on firefox [15:47] i was trying commands like "grub> find /boot/vmlinuz-2.6.28-11-generic [15:47] half a minute [15:48] sclimans, about:config is not a file, you have to write that in url field inside the browser [15:48] Bob_Dole, if there is a network/server problem, yes, it could happen [15:48] and it always says "grub: not found" [15:48] put it on the address bar [15:48] it should appear [15:48] sclimans, but if you can't start firefox at all, check for a file prefs.js [15:48] jrib: Do you know wich channel is that? [15:48] Scooler: and what happens after reboot? does grub give you an errors/warnings? does it drop you into a shell? [15:49] hello i want to reduce my CPU load to save power [15:49] how can i prevent processes from starting on boot [15:49] hello...i want to ask something.. [15:49] joaopinto: I suppose there is. the ubuntu mirrors are very slow. (while everything else is fast, and when using a proxy I can download them faster) [15:49] !ask | hyperstation_ [15:49] hyperstation_: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) [15:49] why my pidgin can't connect to yahoo server?? [15:50] hyperstation_: Yahoo has updated something in their servers, and Pidgin was locked out. [15:50] Hello, I'm facing a problem to configure the wireless card using the command line [15:50] hyperstation_: So you need to update Pidgin too. [15:50] On booting grub hangs at "Loading Grub 1.5...." for approx. 5 seconds before displaying the menu. I have run sudo update-grub. No change. Any ideas how to speed things up? [15:50] Bob_Dole, you can switch to a working VT, with CTRL-ALT-F2, and kill the apt process, that will resume the install process [15:50] hyperstation_: See instructions at http://pidgin.im/download/ubuntu [15:50] hyperstation what is server type [15:50] tell me [15:50] grawity: think theres a fix for it already? im running gentoo on my laptop and my pidgin there has no issues connecting to yahoo [15:50] hyperstation_, because yahoo changed the protocol and you need a newer pidgin version [15:51] Jyxt: It was fixed long ago. [15:51] hyperstation_: change the server to : cn.scs.msg.yahoo.com [15:51] why can't i highten my ipw 3945 card's power supply to 50.1W ~17dBm [15:51] joaopinto: how do I find its PID in busybox? [15:51] hmmm i want to ask another question...btw how to make my usb device work on virtual box?? [15:51] Bob_Dole, ops, try another VT, there is a regular shell vt, CTRL-ALT-Fsomething :P [15:51] when I type (( sudo iwconfig key s:MYkey123456 )) it return Error for wireless request "set Encode (8B2A)" [15:51] Jyxt: But Ubuntu repos don't have it - they have 2.5.5, AFAIK, and the latest is 2.6.2 (with video support!) [15:51] but them I user the same command with another key (less thank 102 bit) it works [15:51] any one can help me ? [15:51] intel says my card supports 17dBm but driver only allowes 15dBm [15:51] hyperstation_, you need the personal edition for that, the open source edition does not support usb devices [15:52] qw17: sudo iwconfig ethX .... [15:52] Jyxt: Ubuntu, like Debian, has "stable" and "testing" and such things. [15:52] hyperstation havw you fixed your server type [15:52] grawity: No we don't. [15:52] Pici: Jaunty and Karmic? [15:52] Meh. Don't want a flamewar. === MrHeavy_ is now known as MrHeavy [15:52] grawity: not the same thing [15:52] anyone can help with wireless configration ? [15:53] ooow btw what is personal edition of vbox actually?? [15:53] I am tring to set up a small Home network with 5-10 pc [15:53] hyperstation_, it's a version distributed by sun [15:53] hyperstation_: See virtualbox.org, support for that version is in #vbox [15:53] for personal use [15:53] joaopinto: everything after F4 doesn't work, and F2-F4 are all busybox :/ [15:53] is it possible to use Ubunu 8.04 as a server for a small office ? [15:53] Bob_Dole, that odd, I remember using a shell to kill apt on a similiar situation [15:54] Ytxx, it is, if you have the know-how [15:54] Ytxx: There is a server version of Ubuntu which might be more suitable !server [15:54] does anyone know how to reset/repair boot sequences or reinstall/repair grub? [15:54] actually F4 is saying what is going on in F1, but won't accept any commands. I havn't tried ctrl+c in it, though. [15:54] !server [15:54] Ubuntu Server Edition is a release of Ubuntu designed especially for server environments, including a server-specific !kernel and no !GUI. The install CD contains many server applications. Current !LTS version is 8.04. For more info see https://help.ubuntu.com/community/ServerFaq/ and https://help.ubuntu.com/8.04/serverguide/C/index.html - Use the #ubuntu-server channel for support [15:55] joaopinto: well I want to have a Server ... and about 5 pcs mixture of Windows/Mac [15:55] and shareprinter and files [15:55] qw17,the wep key should be 40(60),or 104(128) bits [15:55] !server | Ytxx [15:55] Ytxx: Ubuntu Server Edition is a release of Ubuntu designed especially for server environments, including a server-specific !kernel and no !GUI. The install CD contains many server applications. Current !LTS version is 8.04. For more info see https://help.ubuntu.com/community/ServerFaq/ and https://help.ubuntu.com/8.04/serverguide/C/index.html - Use the #ubuntu-server channel for support [15:56] hyperstation seems you have no issues [15:56] hello [15:57] hkuieagle: it's 128, but I still getting the same error [15:58] is there a default username and password for ubuntu 9.10beta? i downloaded it, burned a cd and now when i try to fresh-install it, the setup asks me for a username and password. please help [15:58] I guess I'll try it without the ethernet cable hooked up. [15:58] tadas : verry good [15:58] tadas: The installer asks for what you choose. [15:58] tadas: chose a username and password. for more help with karmic join #ubuntu+1 [15:58] tadas: now you can choose a password [15:58] I typed sudo iwconfig key s:mypassword, as "mypassword" is the password, but the problem didn't solve [15:58] any resource suggestions on how to make an Internet-facing ubuntu box extra secure? [15:59] I'm new here. Does anyone know why in Xubuntu 9.04 I have to reset my Display resolution to 1024 x 768 everytime I log in? [15:59] hkuieagle: could we have a private chat ?? [15:59] if i enter any username and password i get the "authentication failed" message [16:00] tadas: Try "ubuntu" as both username and password, then. [16:00] tadas : Please join #ubuntu+1 for Karmic/9.10 support/discussion. [16:00] i cant update my pidgin...what should i do? [16:00] alegro: are you using a kvm switch? [16:01] ubuntu ubuntu doesn't work, "authentication failed" again [16:01] qw17,does it work when you use 104 bits? [16:01] No just a VGA monitor. [16:01] hkuieagle: no it doesn't not, the password is a string and it's (PASSWORD) [16:01] is it a CRT on the other end of that VGA, alegro ? [16:01] ok, sorry Pici [16:01] hyperstation_: http://www.pidgin.im/download/ubuntu/ read and follow the destructions :) [16:01] Yes, Its a Dell CRT. [16:01] hmm single-click isnt working anymore in kde4, any idea? [16:02] alegro: most likely because any changes your doing to your xorg.conf is *not* being done as root so the changes dont save [16:02] hello [16:02] jyxt, how do I make changes as root? [16:03] alegro: are you using an nvidia card...and changing your resolution with the nvidia x server? [16:03] how can i prevent locking after suspending my pc? [16:03] qw17,but less than 102 bits ,it works ? [16:03] I already have to type in a password because of a bios setting [16:03] and it's annoying to type in two passwords [16:03] Can't find the option anywhere [16:04] Wolfcastle: Maybe in screensaver settings? As it's the screensaver that handles locking. [16:04] i ve already followed this link : http://www.pidgin.im/download/ubuntu/...but my connection is not good enough for updating...btw can i get deb installer instead? [16:04] jyxt, I'm just going to System>Preferences>Display or whatever it is. [16:04] qw17,in my case ,i can set any key :| ... [16:04] Not having the network up solved the problem..just had to reboot to make that happen :/ [16:04] grawity: It's not enabled in screen saver settings [16:05] alegro: hrm...cant help you then [16:05] sorry [16:05] jyxt, thanks anyway [16:05] also, does sound work on the LTSP server? that's what I'm setting up right now. [16:06] ;) [16:07] whats the best way to install a php development enviroment? a lamp server? === decomp is now known as decomp_away [16:08] am not able to install linux-backports-modules-karmic on a fresh netbook install. === ben is now known as Guest50241 [16:08] join:/ dragon [16:08] that's a lot of joins/quits [16:08] Bob_Dole: thats why you disable joins/quits in whatever client your using so you dont see them :P [16:08] netsplit [16:09] Jyxt: I know enough to change tabs in IRSSI. that's about it. [16:09] windows* [16:10] hey do u know how to make virtual box OSE detect usb drives? === Whitor is now known as coffee [16:10] Wolfcastle: there are some settings in the configuration editor [16:10] hyperstation_: You don't. [16:10] hyperstation_: the OSE doesn't do USB === coffee is now known as Whitor [16:10] /apps/gnome-power-manager/lock/suspend [16:11] what else that vbox ose cant do?? [16:11] hyperstation_: you'd have to install the closed-source version Sun offers, and even then, it can be a struggle to get it to use a USB drive. (ubuntu -loves- denying it the chance to do so) [16:12] hyperstation_: That's about it. Maybe 3D acceleration, but I'm not sure. I havn't used the OSE in a while. [16:12] how do I make a package from a .tgz source file? [16:12] !newpackage [16:12] The packaging guide is at http://wiki.ubuntu.com/PackagingGuide - See https://wiki.ubuntu.com/UbuntuDevelopment/NewPackages for information on getting a package integrated into Ubuntu - Other developer resources are at https://wiki.ubuntu.com/UbuntuDevelopment - See also !backports [16:13] btw, do u use vbox personal?? is it not free? [16:13] Bob_Dole my sun virtual box does not work but is it possible to make it work [16:13] hyperstation_: I use the closed source version. it's free as in beer, but bot as in speech. [16:13] s/bot/not [16:14] where can i download it? [16:14] hyperstation_: virtualbox.org [16:14] does your usb work on vbox [16:14] is it http://download.virtualbox.org/virtualbox/3.0.8/virtualbox-3.0_3.0.8-53138_Ubuntu_jaunty_i386.deb [16:14] ? [16:14] Jordan_U: hello, I guess I figured out what's the issue with the processor issue I asked couple of days ago === p is now known as Guest27031 [16:14] the 32-bit/64-bit thing [16:14] Just setup PPA for virtualbox like on their site [16:15] hyperstation_: If you're running Jaunty and 32bits. [16:15] Pici: I think quellhorst was looking for the checkinstall command. to get a .deb [16:15] I burned the iso on a small medium [16:15] pradeep: I never managed to make the USB thing work. Ubuntu would automatically start using anything I told Vbox to use, before vbox got the chance to take control of it. [16:15] But it works fine on OS X* [16:16] mac u mean [16:16] hmm btw can vbox personal emulate windows vista with full effect support?? [16:16] pradeep: I don't think it'd work on mac OS 9. [16:16] how do i create a new user and a new group? [16:16] sorry, windows 7 i mean [16:16] hyperstation_: virtualbox support for that version is in #vbox [16:16] does anyone know what setting in gnome controls the ability to use the scroll wheel to switch workspaces? [16:17] it seems to be disabled by default in karmic [16:17] hkuieagle: COULD you please type the commands which you wrote ? [16:17] azlon: adduesr/addgroup [16:17] hi , i'm able to view (ubuntu) linux drivers on a printer driver cd , & not the userguide on another cd. Windows sees both cd, but not the linux part. A windows machine says the disk is cdfs. Do i install cdfs-src from repos to be able to view the userguide? [16:18] Bob_Dole, i just make it work yesterday, you are hosting a windows in ubuntu, right? [16:18] there is nobody on #vbox...no one answers me [16:18] ArkoldThos: I was hosting ubuntu on ubuntu. I don't bother with windows. :/ [16:19] Bob_Dole, http://www.samlesher.com/ubuntu/virtualbox-with-usb-support-on-ubuntu this MAY work [16:19] :) [16:19] well worked for me [16:19] Need help [16:19] ArkoldThos: sadly, I have no GUI on this box, nor pen/pencil, etc. I suppose I could open up nano, though... [16:19] hyperstation_, google a little :) http://forums.virtualbox.org/viewtopic.php?f=2&t=1438 http://forums.techarena.in/operating-systems/1134596.htm [16:19] good luck :) === _polto___ is now known as _polto_ [16:20] I just felt very nerdy, because I'm on IRC on a box with no GUI. :| [16:20] hyperstation_, and seems like NO virtualbox doesn't support Aero [16:20] Bob_Dole, irssi :p? [16:21] ArkoldThos: indeed. [16:21] :) [16:21] screen+irssi is teh shit [16:21] p [16:21] :P [16:21] Cant log into yahoo mail, don't have an alternate email address plus cant recall answeres to all the questions please help any IRC chats or forums [16:21] ArkoldThos: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [16:21] ArkoldThos: Please mind your language as well. [16:21] Bob_Dole: You must try ircII to become a real geek. [16:21] hey guys whats the command in terminal to send a user mail? when you finger a user it says usually no mail, no plan. whats the command to send a mail through terminal? [16:22] pici, FloodBot2, ok [16:22] xd [16:22] speedhunt3r: 'mail' [16:22] grawity, i tried that it says command not found..do i have to install it? [16:22] speedhunt3r: The 'finger' command checks the modification time of /var/mail/$USER, where Unix has stored users' mail. [16:23] grawity, it says 'mail' can be found in heriloom-mailx and mailutils what do i install? [16:23] can virtual box personal play a game like C&C3, or RA3 or game that uses full D3D??? [16:23] speedhunt3r: I personally prefer bsd-mailx [16:24] anyone [16:24] speedhunt3r: That's not the only tool to send mail though. [16:24] grawity, will the command 'mail' run either way? [16:24] i prefer go to eat something before the uni [16:24] cya :) [16:24] kipingor: ##ubuntu is not the place to ask help with Yahoo Mail. [16:24] Bob_Dole: #ubuntu* [16:24] direct me to the place [16:24] grawity, hmm. I'm so used to help channels having 2 #'s Dx [16:25] * Bob_Dole still uses just one # to join all of them, though. [16:26] kipingor: as in #java they are very helpful [16:26] *ask [16:26] hat [16:26] oops === p is now known as Guest39135 [16:27] kipingor: #ubuntu-offtopic for all non-ubuntu stuff please. [16:27] !ot [16:27] #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics. Thanks! [16:28] Thanks Allan [16:28] hi all === dwarder_ is now known as dwarder [16:28] when will ubuntu get firefox 3.5 update resolved [16:28] i run the damn update [16:29] erikk71: Whats wrong with the firefox-3.5 package? [16:29] erikk71: October 30th. [16:29] i installed 3 times [16:29] grawity, ty for ur help [16:29] erikk71: Installed what? [16:29] erikk71: add the official firefox PPA imo [16:29] an it keep reappearing [16:29] !doesntwork | erikk71 [16:29] erikk71: Doesn't work is a strong statement. Does it sit on the couch all day? Does it want more money? Is it on IRC all the time? Please be specific! Examples of what doesn't work tend to help too. [16:30] speedhunt3r: Btw, if you are using this on a server, you might want to install a MTA (such as postfix) - then you'll be able to send and receive mail from outside too. [16:30] how do i add [16:31] the LTSP server didn't like my NICs. Said none of them were free, so how do I configure the LTSP server's dhcp.conf file? [16:31] the offical ppa imo [16:31] Anybody knows the porcent of users who use ubuntu vs kubuntu? [16:31] erikk71: imo is "in my opinion" [16:31] DiegoCerdan: nobody cares [16:32] hey simple question, anyone using Karmic know what that grouped wallpaper bunch in the wallpaper selection is? [16:32] the bunch of space pictures [16:32] maybe on october 30th this will get resolved [16:32] do they phase between each other [16:32] kinda like what win7 does [16:32] erikk71: You still haven't explained what the problem is. [16:32] haymaker : Please join #ubuntu+1 for Karmic/9.10 support/discussion. [16:32] does ubuntu work on the G3 power pc mac [16:33] uhh ok [16:33] .... Wow, Ubuntu 8.04.3, set up as an LTSP server.. I login to it, and it crashes before starting GNOME, and falls back to the login screen. [16:33] erikk71: that G3 has intel or PowerPC processor? === ptr_ is now known as pipegeek [16:33] Hello. I'm having some issues installing a PCI Card Driver. Anyone available to help? [16:33] credo: G3= Power PC. [16:33] erikk71: PowerPC is not an officially supported architecture anymore, but there may be packages still built for it. [16:33] credo: He just said, PowerPC. [16:33] !ppc | erikk71 [16:33] power pc [16:33] erikk71: PowerPC. Formerly used by Apple for the Macintosh line of computers. Variants are now used in popular gaming consoles. PPC was a fully supported Ubuntu architecture up to and including edgy. It is now a community port, see https://wiki.ubuntu.com/PowerPCFAQ [16:33] 450 [16:34] i realize power pc is old [16:34] credo: G*= PowerPC, basically. G3 was the Generation 3 PowerPC, G4 was the generation 4, and G5 was the fifth generation of PowerPC used by apple. they ceased using PPC after that. [16:34] everything going intel [16:34] llutz: you were totally wrong [16:35] hmm so vbox cannot enable aero in win vista... [16:35] i create a symbolic link from my server's directory (localhost) to my desktop (localhost) and now i am getting a forbidden message, how should i fix that? [16:35] llutz: there are people that care about http://ubuntuforums.org/archive/index.php/t-486132.html [16:35] afaik Debian supports exotic processors [16:35] i even have a useless be box [16:35] i create a symbolic link from my server's directory (localhost) to my desktop (localhost) and now i am getting a forbidden message, how should i fix that? -- i am using lighthhpd, i think its called === l7_ is now known as l7 [16:36] resno: http servers normally have a config setting to allow/follow symbolic links for security reasons. [16:36] DiegoCerdan: nobody cares about people doing pointless statistics? [16:36] anybody around? I just have a few questions about compiling and installing a driver. [16:36] resno: check the configs/docs for you rserver and see how to allow it to follow them [16:37] I have a Sun ultra 5. Been trying to install Ubuntu on it for months. Apparently, the installer is messing up some part of the partition table, so the Ultra 5 won't read the HD. [16:37] does ubuntu support flash drives === factorx__ is now known as Tommy_DO [16:37] picked up one at wal mart [16:37] erikk71: if you have USB ports, yes. if you don't have USB ports, no. [16:37] erikk71: I use them all the time [16:37] yes my dell gx 260 has usb [16:37] erikk71: drives with that U3 stuff can cause issues/problems [16:38] llutz: you dont care [16:38] llutz: other people do care [16:38] alot of times i use 800 mb for storage [16:38] hard drive [16:39] DiegoCerdan: Regardless of whether people care, its not an on-topic question for this channel. You may try asking in #ubuntu-offtopic [16:39] Couldn't load XKB keymap, falling back to pre-XKB keymap [16:40] get some many towers dont know what to do with them [16:40] Having issues compiling/installing a driver. Anyone available to assist? [16:40] Dr_Willis: what gets me is, there is another link already in use and it works fine [16:40] resno: then it may be ownership/permission differances [16:40] i do keep a good stock of hard drives [16:41] Dr_Willis: someone else helped me set that up tho. [16:41] erikk71: If you're just looking to chat, #ubuntu-offtopic awaits. #ubuntu is for support only. [16:41] resno: check the permissions of the dirs the links are pointing to. [16:42] Ubuntu 8.04.3 has issues..lets try this again, with 9.04 [16:42] does ubuntu play dvd [16:42] or do i have to alot of extra software [16:42] erikk71: Ubuntu can play dvds, but won't play the encrypted ones(most DVDs) by default. You can buy software,or use deCSS, which is in a legally grey area. === p is now known as Guest71740 [16:43] i mean dvd movies [16:43] sometimes i get them on amazon [16:43] SOS~~~~~ Couldn't load XKB keymap, falling back to pre-XKB keymap. [16:43] erikk71: That's what I'm talking about. DVD movies are usually have encryption on them [16:43] erikk71: yes and yes you will need to install a couple of extra libs [16:44] ANd that was me changing thought partially half way through a sentence. [16:44] Still looking for help compiling and installing a driver. Would appreciate a few minutes of hand holding. === PriceChild is now known as pricey === pricey is now known as Pricey [16:46] hi all, why would a mfgr put their printer userguide & driver disk on a cdfs filesystem disk? I had to compile support to read it. [16:46] I chose the failsafe GNOME, and it worked. normal Gnome crashed. [16:46] clues to installing amsn-svn people on that channel are asleep [16:46] chang-li: CDFS is what basically ALL CDs use. [16:46] chang-li: ask the mfgr [16:46] !amsn-svn [16:46] Sorry, I don't know anything about amsn-svn [16:47] chang-li: CDFS has been used since some time in the 90s, it was decided as a standard so all operating systems could read the disks without special drivers. [16:47] Bob_Dole: No, ISO 9660 is what CDs use. === squidly__ is now known as squidly [16:47] Bob_Dole: it was unreadable natively, after compiling cdfs module, the disk now shows a iso file. windows was reading it without a problem. [16:47] okay, clearly I'm asking for help in the wrong IRC channel. Can anyone point me in the correct direction? I just need help installing a driver. [16:48] grawity: and that's not CDFS? [16:48] Bob_Dole: cdfs = iso9660 + rockridge [16:48] luller: This is the right channel - but 1) you haven't told what is the exact problem, 2) the rule of IRC: if nobody answers, it means nobody knows. [16:48] luller: saying you need help installing a driver *might* get someone to take the bait [16:49] but saying i need help installing X driver...is way better [16:49] i need help installing a driver for nvidia geforce blah blah blah [16:49] much better than being vague saying i need help installing a driver [16:50] grawity: I downloaded a 'git' from http://gitorious.org/tw68. Contained inside is a driver that I need to install to get a pci card working in my machine. Supposedly this is an easy thing to do, but I've tried compiling it and I have no idea why it's not working. I'm new to Ubuntu. === raidO is now known as raid0 [16:55] ciao [16:55] !list [16:55] This is not a file sharing channel (or network). If you're looking for information about me, type « /msg ubottu !bot » [16:55] why is web browsing slow in ubuntu compared to vista? [16:55] is it possible to get a reading of the cpu temperature? [16:55] i hate making this assertion but it is noticeable [16:55] what is the equivalent in ubuntu 9.04...of the device manager as it was in windows OS? [16:55] zamba: lm-sensors [16:56] mxgb: what browser? [16:56] hi guys my server gives me "connect: Network is Unreachable" when it tries to connect to the net. Why? [16:56] firefox 3.x shipped with jaunty [16:57] Balsaq: try lspci in terminal. It's a bit more descriptive than Device manager, though. [16:57] 3.0.14 [16:57] mxgb: just get a faster one like chromium, opera, epiphany.... etc [16:57] what is the "device manager" in ubuntu 904? [16:57] mxgb: you'll want to be upgrading to 3.5 [16:57] o ty bob dole [16:57] Gummi: while i've got opera it is only slightly faster than FF [16:57] mxgb: that is a slow one, get either chromium or opera 10 [16:57] and i dont think chrome is out there for linux yet? [16:57] Bob_Dole how wxactly do i type that in? [16:57] chromium > chrome [16:57] its the original === kmosh is now known as soni__ [16:58] JS heavy websites are really painful to scroll through [16:58] Balsaq: click applications, go to accesories, and open terminal [16:58] getting a "network error" when trying to connect to yahoo with Empathy. any suggestions? [16:58] mxgb: Flash is slow on Linux. The only way to overcome this is to run a windows browser under WINE, with flash installed under WINE as well. [16:58] Bob_Dole ok in terminal [16:58] Balsaq: now just type lspci and hit enter [16:59] Gummi: I heard chromium was fast internet wise, but very slow as an actual app [16:59] aha... [16:59] that's an L, by the way [16:59] Bob_Dole: but why is JS slow? [16:59] Bob_Dole so i dont type in sudo 1st bob? [16:59] * Like is away: 27.455 LSB> [16:59] and i dont hitnk i can use chrome under wine [16:59] how can i run a bin/cue file without burning it to a dvd [16:59] hi. is there a kde version of emacs? [17:00] mxgb: the javascript engine in ff3.5 is considerably faster. seriously, consider upgrading. [17:00] cj_: emacs is text based === sleepy_train is now known as train [17:00] mxgb: js shouldn't be, on a decent browser. Try arora, it's a Webkit based browser, similar to chrome. [17:00] Bob_Dole, Dont mean to derail your topic, but you had mentioned "flash is slow on linux"... is there hope in sight? [17:00] how to switch from a xterm session back to a gnome/kde session? [17:00] dassouki: mount the file as a cd [17:00] sipior: thanks [17:00] dassouki: the normal gnu emacs and xemacs doesnt fit into kde i think [17:00] Bob_Dole: thanks [17:00] without log out the xterm user [17:00] RanDom33: maybe with Flash 11. It's kinda slow on Mac OS too, so they have reason to fix whatever is causing it. [17:00] it would be great if there was an emacs version using qt for font rendering etc [17:00] My server gives me "connect: Network is Unreachable" when it tries to connect to the net. Why? [17:00] Arabus: any recommended tools for that ? [17:01] cj_: have you tried emacs 23 [17:01] Bob_Dole, gotcha, that seems to make sense [17:01] dassouki: you can mount them but i cant remember the utility i used to use === miguel is now known as Guest76463 [17:01] mount, it is a commandline application [17:01] dassouki: im using 21 i think. ill do an upgrade [17:01] !iso | dassouki [17:01] dassouki: To mount an ISO disc image, type « sudo mount -o loop » - There is a list of useful cd image conversion tools at http://wiki.linuxquestions.org/wiki/CD_Image_Conversion - Always verify the ISO using !MD5 before !burning. [17:02] I fell like I had more to add to something I was saying, but I forget exactly what. [17:02] dassouki: ah cdemu http://snippets.dzone.com/posts/show/2699 [17:02] s/fell/feel [17:02] thx Pici just scrambled to remember that line :-P [17:02] Hola, soy nuevo [17:02] Bob_Dole, thats why i said didnt want to derail your topic.. lol [17:03] Hi, i am new [17:03] Hello kenkenay [17:03] hello, RamDom33 [17:04] i have a trouble (i do not ver well english) [17:04] hy all [17:04] why isnt the emacs 23.1 in the official repository? [17:04] Uh, in relation to running browser+flash under WINE, it has a few bugs, and should only be used on very flash heavy sites. Flash 9 apparently helps. (I never managed to get flash 9 to work, it always defaulted to flash 10 after flash 10 had been installed, even after apt-get purging it...not sure how that happened) [17:04] Is there a spanish ubuntu channel for kenkenay ? [17:04] !es | kenkenay [17:04] kenkenay: En la mayoría de canales Ubuntu se comunica en inglés. Para ayuda en Español, por favor entre en los canales #ubuntu-es o #kubuntu-es. [17:05] Thank you Pici [17:05] histo, everyone, i just install ubuntu server edition (first time), is not installed x? [17:05] como lo hago,? how i do? [17:05] ubuntu server is GUI-less, h34v3n [17:05] kenkenay: Type /join #ubuntu-es [17:05] ok thanks [17:05] thank you, gracias [17:06] h34v3n: I'm using ubuntu server edition right now. It's not so bad without a GUI for IRC and managing server stuff. web-browsing is a pain without a GUI, though. [17:07] Bob_Dole: I have thought about getting the server version, but then I started wondering if the desktop version can operate as a Samba server itself [17:07] yeah i see that is samba service running [17:07] on a server edition [17:07] i can't deactivate screensaver lock when suspending to ram...it's disables in the screensaver settings and I can't find anything in gconf....anyone has any tips? [17:07] mnaines, samba can always be installed on any distribution that i am aware of [17:07] so can i install desktop edition on a server x64? [17:08] bye [17:08] mnaines: yeah, the desktop can work fine as a server too. the advantage for the server version for me is, the LTS has a longer support cycle. [17:08] The static DNS entry on my server it 0.0.0.0. If i change it, it changes back on reboot. how can i change it so when it boots it uses x DNS? [17:08] h34v3n: yes or just sudo apt-get install ubuntu-desktop [17:08] mnaines: uh, the server version of the LTS has a longer support cycle than the desktop version of the LTS [17:08] Bob_Dole: The advantage for me in using the Desktop version as a server is the GUI [17:08] i'm having a crazy problem with a broken software index and synaptic being unable to remove old kernels and headers [17:08] can anyone help me with this? [17:08] h34v3n: that brings in everything though. you may just want to get xserver-xorg and fluxbox or something [17:08] mmm then maybe that will work for me, because is for intranet use only [17:08] giacomo_c: broken how? [17:09] hello, guys how do I control the brightness of my laptop screen on ubuntu [17:09] is there a way to detect your motherboard manufacturer and model in ubuntu? [17:09] I checked gnome-power-manager [17:09] dmesg? [17:09] speedhunt3r: sudo apt-get install hardinfo [17:09] i'm not sure, it pops up a message that says the software index is borken when it can't remove an old kernel/headers [17:09] but did not find what I was looking for [17:09] speedhunt3r: try "sudo lshw -vvv" [17:09] mnaines: the GUI is useful for a few things. But I mostly remote-manage my systems without VNC. I started with the GUI, I havn't used it to manage my home server in about 3 months, though. This is a new system, I decided I didn't need the GUI. [17:10] Bob_Dole: I am still too new to Linux to go without the GUI [17:10] speedhunt3r: without the -vvv actually [17:10] soni__, pepperjack, i never use fluxbox but i saw it ... so its possible install it on server edition? [17:10] speedhunt3r: sudo dmidecode may also provide that information [17:10] mnaines, I would just use the desktop edition for now, install samba, setup samba.. and experiment with it [17:12] RanDom33: Yeah, because I like having everything in one place, not having to switch between places or dual-booting to get everything I want...I guess that comes from my Windows days [17:12] thanks guys [17:12] mnaines, best of luck to you with it [17:12] RanDom33: Thanks [17:13] My home server is still the Ubuntu 8.04 desktop version. :/ === Guest76463 is now known as miguel === miguel is now known as miguel8881 [17:13] thank you Bob_Dole thatt was of great help too me...had dell on the phone and needed to give them some info so the could better assit me...thank you [17:14] hi. i have update ubuntu 8.04 to 9.04 and Skype stop work (microfon). Can you help me locate problem? [17:14] Balsaq: no problem. lspci is a very useful thing. [17:14] willm iplus pcimcia card work with Ubuntu? [17:14] will* [17:15] the ls toolsuite in genereal is very useful, especially when combine with grep :-9 [17:15] anyone here tried the hulu desktop on ubuntu? [17:15] Bob_Dole is their a book or web page i can print with all the terminal commands? [17:15] Balsaq, linux in a nutshell [17:16] alternattively you could try wikibooks [17:16] Balsaq: http://ss64.com/bash/ [17:16] and wikipedia [17:16] RanDom33...ok TY, th4e book is titled....Linux in a Nutshell....TY!!! [17:16] wew [17:16] test [17:16] when i try to run 'sudo apt-get install -f', it spits out a long error message about how it can't delete stuff: http://pastebin.com/m18d743bd [17:16] gae [17:17] mnaimes..thank you viewing it now BRB TY [17:17] http://oreilly.com/catalog/debian/chapter/book/index.html [17:17] might help [17:18] hi [17:18] does anyone know how i might go about deleting these old kernels so apt/synaptic will work again [17:18] hi === me is now known as Guest73607 [17:19] how do i join a server thats not the list? [17:19] "/server nameofserver" [17:19] hello, network manager doesnot connect wifi automatically network when i logon. if I do 'sudo iwconfig eth1 essid myessid' it connects after some time. what should I do to correct this? [17:20] opex1: Did you go in and check the settings? Sometimes I have to go in and tell it to automatically connect === LjL-Temp is now known as LjL [17:21] yes, i deleted and created it again [17:21] opex1: It is always advisable to check the network settings after you set up the network [17:21] it = connection in NM [17:22] opex1: There should be a checkbox that enables "automatically connect" [17:22] it worked when i installed ubuntu, but after some time it doesnot [17:22] the checkbox is enabled [17:23] anyone know the location of libflashplayer.so [17:23] also checked 'enable wireless' [17:23] apparantly the one at /usr/lib/flashplugin-installer/ is not it === stevem_ is now known as Lantizia [17:24] try /usr/lib/flashplugin-nonfree/ [17:24] In Ubuntu 9.04, what file(s) control the Window Manager? How does Window Manager get launched on initial login vs subsequent login? [17:24] Jyxt: "locate libflash" should do the trick [17:24] Arabus: no dice...only have /usr/lib/flashplugin-installer === AxesDNite is now known as ph33r === DaZ_ is now known as DaZ [17:25] Jyxt: sounds like it is not fully installed [17:25] Arabus: thanks that found it [17:26] Is there any software for using the modem as a telephone with the headset? [17:26] Skype, Ekiga [17:26] Jyxt: np. you can also try find /lib -name "libflash", locate and find are very powerful [17:26] moin [17:26] IdleOne, With skype you can use your modem and phone line ? [17:27] DareDevil0: with skype you can use the internet to make calls to other skyp users and to land lines. [17:27] Hi all, i am not sure how to transsfer files from my ubuntu machine to my virtual box guest winxp [17:27] My system is running OpenJDK. I'm pretty sure I've installed the Sun JRE correctly, and would rather be using it instead. How do I switch? [17:28] DareDevil0: calls to skype users are free but for land line calls you will have to get a account and pay [17:28] IdleOne, Yeah but i am talking about using my phone line, not to contract skype services [17:28] !multijava | spasticteapot [17:28] spasticteapot: To set which java version/implementation is to be used as default, use sudo update-java-alternatives === me is now known as Guest71649 [17:29] DareDevil0: I don't know of any software that does that, does not mean there isn't any [17:29] anyone know id there is away to import data from my physical disk to my virtualbox guest OS (winxp) [17:29] jack87: which files do you want to transfer? Applications or just user files? [17:29] Uhhmm there must be [17:29] jack87: yeah, read the vbox docs, they tell you how (you setup a share). Or ask #vbox [17:29] jcinpv: just user files [17:30] jrib: i set up shared folder but i am not sure how to access it [17:30] DareDevil0: probably yes [17:30] jack87: look under nework neighborhood [17:30] jack87: it can all be done through the gui menus, the vbox documentation details all this [17:30] jack87: What's the total size of all the files? GB or MB? [17:31] jack87: http://www.virtualbox.org/manual/UserManual.html#sharedfolders [17:31] my goal is to install my network printer on it so i can print when needed my printer is not linux supported [17:31] jcinpv: files are all fairly small nothing larger then 100mb [17:32] jack87: What others are saying is to set up a shared folder in Virtualbox, then you don't have to transfer anything - just access. [17:32] thanks jrib i will read through that closer [17:32] hi [17:33] i have multiple shared folders set up i am just not sure how to gain access jcinpv i will read through the link jrib gave me closer [17:33] after dist upgrade i worry about Quanta's print preview which opens gimp instead of a lightweight gtk-print or kprinter dialog :-( [17:33] nocleader: no luck under network places [17:33] THANKS GUYS [17:34] hi [17:34] does kubuntu use pulseaudio too? [17:38] can anyone help me...i am unable to boot into ubuntu..the problem is that i tried to install XP to dual boot with existing 9.04...then my installation crashed...so i reinstalled my grub when another HDD was also connected.. The other HDD has been removed...and Now I am unable to get ubuntu... [17:40] queryboy: when you currently boot, windows boots? [17:40] Arabus; i didnt get you...now i am on ubuntu live [17:40] mnaines: wow thought there were more line commands than that...hey maybe i can learn/memorize thisstuff after all... [17:40] queryboy: when you boot the computer from harddisk - does he enter grub or does he just boot windows [17:41] Any software for using my modem as a telephone in linux? [17:41] Arabus; i just get a message saying that insert a disk...no disk detected..though in my BIOS i can see my disk detected and in my Live ubuntu i can see all my disk files [17:42] Balsaq: there are actually mousepads who have these commands printed on .-9 [17:42] Arabus: no way! ok i would die for a mouse pad like that! where can i get one of those? [17:42] there are two operating systems on your harddisk, eg. ubuntu and windows? [17:43] can someone tell me if it can run need for speed Shift in ubuntu 9.04? [17:43] Thank you jcinpv jrib nocleader [17:43] and if it can how can this be accomplish [17:43] diogo_79: - i wouldn't - [17:44] can anyone help me? i'm trying to have apt-get remove linux-headers-2.6.28-14, linux-restricted-modules-2.6.28-14-generic, and linux-restricted-modules-2.6.28-15-generic but apt-get apparently will not do this [17:44] queryboy: there are two operating systems on your harddisk, eg. ubuntu and windows? [17:44] !mousepad [17:44] Sorry, I don't know anything about mousepad [17:44] i've tried running apt-get install -f and it only shoots out a bunch of errors about how it can't remove these: http://pastebin.com/m18d743bd [17:45] Arabus; can you wait a sec....just on a call...will it be ok?? [17:45] if you want THAT kind of games running on ubuntu - youl'd be better off installing virtualbox - on hardware supporting either AMD V or Intel VT (hardware virtualisation) [17:45] when adding a file to a directory i know how to make the file keep the parents permissions, but how can I make the owner sticky? so if i add a new file is doesnt add it with owner bigmack83:bigmack83 but adds it with the owner of the parent dir its in? [17:45] giacom_c : do not delete 2.6.28-15 [17:45] why? [17:45] i have a newer kernel that i run === kmosh is now known as soni__ [17:45] i have 2.6.29.4 [17:46] !/j #xubuntu [17:46] Sorry, I don't know anything about j #xubuntu [17:46] hi, i'm with a problem with one server (ubuntu 8.04), in dmesg i see 2 problems relationated with kernel probably: http://pastebin.com/m292716a6 and this: http://pastebin.com/m3e14345 [17:46] does the package for eclipse come with the debugger plugin? [17:46] you try to delete the old 2.6.28-14, but misstake with 'current' linux-restricted-modules-2.6.28-15-generic [17:46] queryboy: sure, I'll be here for another hour or so :-) === natureshadow1 is now known as natureshadow [17:47] i used ubuntu tweek's 'clean up' thing for the kernels and now i have this trouble, do i need to reinstall 2.6.28-15? [17:47] and then will it let me remove -14? [17:47] giacomo_c: if you got the error cannot do... it is not removed [17:48] Hello, I'm trying to remove KDE from Ubuntu, I've used the command sudo apt-get remove kubuntu-desktop, but all the applications are still there [17:48] !puregnome | tomitzel [17:48] tomitzel: If you want to remove all !KDE packages, type « sudo apt-get remove kdelibs4c2 kdelibs5-data && sudo apt-get install ubuntu-desktop » into a !terminal [17:48] tomitzel: yes, that's by design. you'll have to remove them manually. [17:48] OerHeks: it removed some things for sure, but these three left it has not... what should i do to fix it then? so synaptic/ apt-get stops giving me errors? [17:49] I am having this problem: (not exactly this torrent, and I am using ubuntu to try play the thing) http://answers.yahoo.com/question/index?qid=20090618030134AAzdYlW [17:49] ubottu: thanks [17:49] You're welcome! But keep in mind I'm just a bot ;-) [17:50] my firefox doesnt see java, how can i fix it? [17:50] giacomo_c i should leave them, i am not shure if it is possible to remove them all [17:50] ok [17:50] kaeser_: so basically you have that problem, except that in reality you have a completely different problem...? [17:50] i'll figure it out on my own i guess, or just keep asking [17:50] the similarities ending i "can't play a file"? [17:50] hi, anyone know of a program that can do computer statistics kind of like gkrellem or conky in the terminal? I know top is good at cpu and mem etc.. but I need something that is not as verbose, just an overview. [17:51] LjL, as you like. [17:51] mikinanuq: harinfo [17:51] mikinanuq: i mean hardinfo [17:52] kaeser_: i was *trying to say* that you have not at all described your problem. you're trying to play a video file? what format? what program are you trying to play it with? how does it fail? does it give any errors? [17:53] is there search in ubuntu that searches entire system, not just home directory? [17:53] werfact: You can search the entire system [17:53] find, locate [17:53] mnaines, how? [17:53] Just click on the "File System" icon before you click Search [17:54] Hi, Currently I've got an ubuntu install on my "sda" but now I want to move it to "sdb" instead. What would be the smartest/easiest way? Just copy my files to the new HDD (already partitioned), then changing the entries in /etc/fstab from sda to sdb, or is there an easier way? === mike is now known as Guest4628 [17:55] I've just downloaded a torrent for a .avi video today. Then when I tried to open it(I downloaded the same video twice because I tried to find another one that doesn't give me that problem) the video has 700MB but a 18 sec message appears teeling to use MovieXPlayer to play it. I am figuring out what is the the codec and player that I can use. What do I need? === bambam is now known as Guest24201 [17:55] Hello [17:55] werfact: Under the Search Results tab, off to the right there should be a plus sign or drop-down arrow. Click that and select File System, then try the search again [17:55] when does the new ubuntu come out? [17:56] werfact: It should be to the right of the "reload" button [17:56] I recently did a net install of 8.04 LTS, and I want to be able to get my computer to hibernate. I know it is posible, because prior to installing ubuntu, i had Debian Lenny install, where it was possible. [17:56] also, i did a netinstall and had almost NOTHING after installation [17:56] how to load a 32bit lib into the memory on ubuntu amd 64? === dorins_ is now known as dorins [17:56] suppermann: How much swap space and RAM do you have? [17:57] How Can I figure out which codec a movie is using/ [17:57] file uses?* [17:57] mnaines: I have 512 MB ram and a 1024 MB swap file [17:57] mnaines, i got it, thanks [17:57] I have installed the package hibernate. it doesn't really do anything currently, though [17:58] suppermann, look in the upper right corner of your screen. Do you see the box with your name in it? [17:58] mnaines: no. [17:58] suppermann: Right next to the clock in the upper right [17:58] kaeser_: from a forum: "I've found moviexplayer to be an ellaborate con. They get you to pay via SMS for £1.50 to obtain a license. Once you enter the license the software installs but the player does not work on any of the movies "supposedly" encoded with their formatting." === Mavrik- is now known as Mavrik [17:58] New here. Does anyone why in Xubuntu 9.04 I have to change the screen resolution to 1024x768 everytime I log in? [17:59] suppermann: There should be a box there with your username in it or "*username* Account" [17:59] I am testing python on a Jaunty VM that someone else built (click2try.com), [17:59] and after they ran 'apt-get update and apt-get upgrade' the default python2.6 gives a "Segmentation fault" when the interpreter is started [17:59] mnaines: yes. My name is not there. There's a green man, though. When i click it, i get the same as if i clicked System -> Quit... [17:59] dabukalam: ok will check out.. thanks [17:59] anyone have ideas on how to debug? [17:59] Link please LjL [17:59] what are the options for selinux in the kickstart file? default is: selinux --enforcing [17:59] i want to disable selinux [17:59] mnaines: There is no such box [18:00] suppermann: My bad. I am on Jaunty. I do not know much about Hardy [18:00] kaeser_: http://forums.cnet.com/5208-12542_102-0.html?threadID=325080 <- several posts say it's a scam. [18:00] I am using gdm and metacity [18:00] kaeser_: i guess it's among the risks one runs getting pirated video material :) [18:00] I just installed the LAMP stack through tasksek, but my /var/www folder is only accessible for root? [18:00] tasksel* [18:00] LjL, I don't play pirated stuff [18:01] I wonder if anyone can offer me cool stuff I can do using Ubuntu, like painting fire and using a wiimote :P [18:01] hi all [18:01] kaeser_: well, i can't imagine anything legit that would offer a fake torrent for a movie that just displays a message telling you to pay for a specific player [18:02] New here. Does anyone why in Xubuntu 9.04 I have to change the screen resolution to 1024x768 everytime I log in? [18:02] LjL, I have had many DVDs that when you insert them they pop up an ad for a DVD player program [18:02] LjL, I am not going to try convince you about that. Think what you want to. [18:02] i have set up a printer using the system->administration->printing gui, and it works....but how can i address this printer from the command line, i.e. lp? [18:02] hi all ...... my when i click on the nm-applet , it shows correctly that it is a wired connection but it also tell the device is not managed ......what's wrong ? [18:02] mnaines: one thing is popping up an ad, another is not being video at all. refer to the URL i gave above [18:03] Hello guys. I have a problem. I don't know if it's a problem with my hardware or with Ubuntu. Recently, very often, my computer turns off by itself, and, to restart it, I need to pull the plug and put it in again. This happens always when I start up my computer. Precisely when the writing "starting up" appears. What do you think? === Aviramm is now known as Aviram === System is now known as Sunny007 [18:03] francesco__: never happens while it is running, later on? [18:03] francesco__: think it might be suspending and not coming back? [18:04] LjL, does the default movie player in Linux play all formats? [18:04] nm [18:04] I'm getting this Error out of no where : /usr/bin/X11/xauth: error in locking authority file /root/.Xauthority. Any help? [18:04] mnaines: no player plays "all formats" i suspect [18:04] pepperjack: What do you mean? [18:04] mnaines: there is no default player but ubuntu has good support for most formats [18:05] mnaines: yes no .AVI has the ability to detect which players you are using and display a message telling you to use another. [18:05] francesco__: ignore me i didnt read your whole post [18:05] s/yes/yet/ [18:05] I'm getting this Error out of no where : /usr/bin/X11/xauth: error in locking authority file /root/.Xauthority. Any help? [18:05] Hello guys. I have a problem. I don't know if it's a problem with my hardware or with Ubuntu. Recently, very often, my computer turns off by itself, and, to restart it, I need to pull the plug and put it in again. This happens always when I start up my computer. Precisely when the writing "starting up" appears. What do you think? [18:05] Hey, I set a proxy at install, and It's having issues, is there anyway I can disable it? [18:05] I've got an ubuntu install on my "sda" but now I want to move it to "sdb" instead. What would be the smartest/easiest way? Just copy my files to the new HDD (already partitioned), then changing the entries in /etc/fstab from sda to sdb, or is there an easier way? [18:06] Bob_Dole: should be under the system menu to change it [18:06] francesco__: please, feel free to repeat your question without even answering enquiring questions that have been posed to you! :) [18:06] Bob_Dole: sorry im not terribly familiar with gnome but i know under system --> somthing is your proxy settings [18:06] I'm getting this Error out of no where : /usr/bin/X11/xauth: error in locking authority file /root/.Xauthority. Any help? [18:06] SHiR0: sdb can be ann empty harddisk, read something about dd. and be careful. [18:06] !info wiipdf | Aviram [18:06] Aviram: wiipdf (source: wiipdf): present a PDF file using your wiimote. In component universe, is optional. Version 1.2-2 (jaunty), package size 6 kB, installed size 64 kB [18:06] SHiR0: use cp -ax or rsync -ax to make sure permission will be kept. [18:06] Arabus; hey so what did you say [18:07] sash_: Ok, thanks! [18:07] LjL? [18:07] Arabus; i have only ubuntu on my disc now [18:07] [19:03:53] francesco__: never happens while it is running, later on? [18:07] SHiR0: dd is slow, will copy all empty sectors and you will have to resize fs if partition-size differs. use cp/rsync [18:07] I'm getting this Error out of no where : /usr/bin/X11/xauth: error in locking authority file /root/.Xauthority. Any help? [18:08] Arabus; since i wasn't able to boot..i had extra space in my disc into which i started another installation of ubuntu which also failed [18:08] llutz: Ok, will look in to it! [18:08] Arabus; are you there [18:08] I have a 4G USB stick that is locked (windows locking thingy) How can I format using linux to Fat32 to remove the lock and start over? [18:09] Ljt: Not until now. Only when there's "starting up" on the screen. By the way, I have a double partition. I restarted my PC in the Windows mode. It happened why I try to restart the PC from Windows. [18:09] How do I update what commands/executables are in the path? I've created ~/bin and put a symbolic link in there pointing to an executable.. but I still can't run it from the terminal [18:09] hi [18:09] Sunny007: why are you running as root? [18:09] Are you using windows? [18:09] llutz: dd with bs=1 is slow... if both disks have the same size, or the second one is larger, he can dump the whole partition and it will be bootable. so why shouldnt he use dd? [18:09] i've always run it as root [18:09] or firefox? [18:09] the whole disk, i meant. dump the whole disk. [18:10] Sunny007: You know that's a bad thing, right? [18:10] can anyone help me...i am unable to boot into ubuntu..the problem is that i tried to install XP to dual boot with existing 9.04...then my installation crashed...so i reinstalled my grub when another HDD was also connected.. The other HDD has been removed...and Now I am unable to get ubuntu... [18:10] Slart: a line like export PATH=$PATH:/new/bin <-- in your .bashrc file should do it [18:10] sash_: bs=4k would be faster, but theres no need to transfer images if copying files would be fine [18:10] Slart: you can set that in profile or whatever too [18:10] LjL: What do you thing? [18:10] mnaines I dont know its a bad thing [18:11] llutz: but how shall he be able to boot ist? he talked about an ubuntu-install, not about data. [18:11] Sunny007: Running as root is a huge security risk [18:11] francesco__: i think it might be worth trying putting the usual "noapic" or "noacpi" options on the kernel command line and see if it gets better [18:11] sash_: fixing fstab/grub after copying and all is fine (as he mentioned in his 1st question) [18:11] pepperjack: hmm.. but I have this vague memory of ~/bin already being in the path.. I could be wrong of course [18:11] dabukalam: hardinfo is nice but it's not quite what I need... I'm ssh'd to my PC and I wanted to keep track of cpu, ram, network traffic, space used etc.. on pc live, kind of like what top does but for several devices [18:11] Slart: echo $PATH <-- to see [18:11] hi all ...... my when i click on the nm-applet , it shows correctly that it is a wired connection but it also tells " the device not managed" ......what's wrong ? [18:11] Ljt: What is it? [18:12] ok sry this is not an ubuntu question but why doesn't this work: ssh -D 81.144.132.131:4455? [18:12] LjL: What is it? [18:12] dabbish: because -D expects an argument? [18:12] can anyone help me...i am unable to boot into ubuntu..the problem is that i tried to install XP to dual boot with existing 9.04...then my installation crashed...so i reinstalled my grub when another HDD was also connected.. The other HDD has been removed...and Now I am unable to get ubuntu... [18:12] Hi! I'm trying to install secondary hard drive on Hyper-V in Ubuntu 8.04, but after adding it in the Hyper-V and reboot - fdisk-l shows only primary drive... Do I need to explicitly do something for the system to recognize it? =\ [18:13] francesco__: refer to this https://help.ubuntu.com/community/BootOptions and this https://help.ubuntu.com/community/BootParameters [18:13] queryboy: boot from livecd and redo grub [18:13] pepperjack: ah.. good idea.. it seems it wasn't.. well.. thanks for the help.. I'll export it manually then [18:13] !fixmbr | queryboy [18:13] queryboy: GRUB is the default Ubuntu boot manager. Lost GRUB after installing Windows? See https://help.ubuntu.com/community/RestoreGrub - GRUB how-tos: https://help.ubuntu.com/community/GrubHowto [18:13] jrb: i have to use a port to connect, never done that before, can you point me to the correct syntax to use pls? [18:13] pepperjack; i did that several times...but it didn't work [18:13] francesco__: you want this paragraph initially: https://help.ubuntu.com/community/BootOptions#Change Boot Options Temporarily For An Existing Installation [18:14] why does the update manager keep wanting to do a partial upgrade, but the only thing it does is delete amarok? [18:15] queryboy: so when the computer boots do you get a grub screen or a screen telling you to hit esc key with a countdown? [18:15] pepperjack; i simply get DHCP.../ [18:16] pepperjack; and then i get a message saying disk not found...insert a disk...though in the BIOS settings i can see my disk [18:16] Anybody know how I can reset a locked (software lock) thumb drive in linux? [18:17] queryboy: ok so maybe it is trying to netboot or somethig. redoing grub is really easy. youll need a livecd and 1) boot livecd 2) open a terminal 3) sudo grub 4) root (hd0,0) 5) setup (hd0) <-- now before you do step 4 you need to know that hd0 is sda/hda so hd0,0 is hda1 or sda1 if you sudo fdisk -l and that is your ubuntu partition it should work [18:18] Hi guys. How do I check the temperature of my CPU on Ubuntu? [18:18] JuJuBee: Someone in #kubuntu already pointed you to using mkfs.vfat /dev/ when you asked in there about this [18:18] pepperjack; i did it an hour ago almost 2-3 times...i got it from that help.ubuntu.com doc....but it didn't turn out to be successful [18:18] francesco__: https://help.ubuntu.com/community/SensorInstallHowto [18:19] queryboy: problem is your bios/boot order probably then. [18:19] reisio: Thank you. [18:19] pepperjack; boot order is set corerectly [18:19] queryboy: make sure you can see the hd in the bios then make sure it is in the boot list [18:19] Hi guys, I've been asked to add an ssh_rsa key to my ssh folder, yet I can't find it [18:19] queryboy: well im out of ideas then :) === decomp_away is now known as decomp [18:20] genii: thanks [18:20] is there a way to install the sun version of java [18:20] who can help me get my DVDs playing? [18:20] or do they also use icedtea ? [18:20] Oldwolf : do you have the rights to see it ? [18:20] tyranos: sun-java6-jre will do that. [18:21] pepperjack; i am planning to install in the remaining space of my disk with another copy of ubuntu and backup all my files and then format the 1st installation [18:21] Oerheks: Yes, I'm running as root. I only found an ssh folder in /etc [18:21] when I try to mount a windows computer via it's name it cannot be resolved. How do I fix this (besides putting the names in etc hosts? [18:21] MenZa, but java -version gives me "0penJDK Runtime Environment (IcedTea6 1.4.1) (6b14-1.4.1-0ubuntu11)" [18:22] anyone know how to set up a persistent ssh tunnel? i have authorized keys set up but if i turn my computer off or get disconnected, i want the remote to reestablish the connection when available [18:22] queryboy: oh wait a minute. boot livecd and mount the partition check the /media/whatever/boot/grub/menu.lst and make sure the partition number is correct still for the entry for ubuntu at the bottom of the menu.lst [18:22] i already removed all the installed openjdk but maybe i need a restart [18:22] queryboy: if you moved hd around it could be wrong now. [18:23] Oldwolf: usually this is ~/.ssh/authorized_keys [18:23] can anyone tell me how to get audio out of hdmi [18:23] upgraded to karmic. sound is really f** up. sometimes it works, most of the time it sounds just like the internal plug is switched all few seconds. rhythmbox is running but no output. where to begin and reconfigure the whole sound stuff? (playing with alsamixer doesnt help) [18:23] how do you use samba to scan your network for hosts? [18:24] nbranch: that's offtopic. try ##hardware [18:24] waaait [18:24] @Oerheks: Well, I tried cd ~/.ssh but it didn't find it. Yet I always ssh into my box from my nokia tablet all the time... [18:24] hi [18:24] or maybe it's not. I'll shut up now. [18:24] I installed LAMP stack through tasksel but Firefox is asking me if I wish to save the PHP file when I POST a form. How do I get apache to deal with it as normal? [18:25] alguien habla español [18:25] !es [18:25] En la mayoría de canales Ubuntu se comunica en inglés. Para ayuda en Español, por favor entre en los canales #ubuntu-es o #kubuntu-es. [18:25] good evening [18:25] Oldwolf: i used this url 2 make my keys, maybe it is a help for u2 >> https://help.ubuntu.com/community/SSH/OpenSSH/Keys [18:26] you can chouse any place to store the keys, but why ? is it in reach of the permit of the client ? === D-ZERO is now known as D-rew [18:27] pepperjack; have a look at this: http://paste.ubuntu.com/294135/ [18:28] Hello all, previously i had a message that would display when i would login to my system remotely via SSH . This message would display before you would input password, not after the login. Any ideas what the name of this file was, i cant remember for the life of me [18:28] 72 [18:29] Oerheks: I want things neatly organized. I see what I did wrong, I should make the dir first :D [18:29] Is there any way to add more Characters onto the Character Map in Ubuntu? [18:29] does anyone mind telling me how to get HDMI audio to work on Jaunty 9.04 [18:29] Oldwolf, yes, i remember to md it [18:29] Just change the sound preference. [18:29] My version of Ubuntu is Jaunty 9.04 [18:29] anyone here using ati x1200 and got compiz working? grim chance...thought i'd ask [18:30] Right click on the audio icon and click preferences and choose output and select the HDMI port. [18:30] how do you make the openchrome drivers work under 9.04? i've checked to make sure the xserver-xorg-video-openchrome packages were the newest, but i can't seem to enable them in the xorg.conf, if that's even how i do it. this is a fresh install with all current updates applied [18:30] it doesnt show up [18:30] deathtech MOTD? /etc/ssh/sshd_config [18:30] queryboy: gksudo gedit /media/root/boot [18:31] nah, that one shows after login i beleive, i think i found it . its /etc/issue.net (issue works but not for ssh) [18:31] queryboy: er... gksudo gedit /media/root/boot/grub/menu.lst [18:31] just used hdmi myself on my laptop with an intel card with ubuntu ... works great [18:31] hola [18:31] Thsi will display info after a username is entered, but before a password, feeding my old school bbs needs :) [18:31] queryboy: can you paste this and then the output of sudo fdisk -l [18:31] deathtech: oh, i think you're right :) [18:31] like a nice ascii chick greeting me at every login [18:31] pepperjack; the file is empty [18:31] ;) [18:31] Is there any way to add more Characters to the Character Map in Ubuntu Jaunty 9.04??? [18:32] Oerheks: Does it matter where I make that dir? === _shoot^ is now known as shoot^ [18:32] pepperjack; http://paste.ubuntu.com/294139/ [18:32] does anyone mind telling me how to get HDMI audio to work on Jaunty 9.04 [18:32] it doesnt show up in my audio icon preferences [18:32] queryboy: so it doesnt exist if you ls /media/root/boot/grub are there any files? [18:32] is there a channel specific to video drivers for 9.04 ? [18:32] Bluetooth audio works great on Ubuntu now. Although the bluetooth-applet still doesn't work well on USB devices. [18:32] A workaround is to manually restart the applet with the device plugged in. [18:33] pepperjack; http://paste.ubuntu.com/294140/ [18:33] phone dialer like application in ubuntu [18:33] deathtech /etc/ssh/sshd_conf has this line #Banner /etc/issue.net [18:33] czy tutaj się mówi po polsku? [18:33] Oldwolf es, the place of dir must be available 2 applications you use, i didn't change any of it, to avoid simple problems [18:33] I've noticed that Ubuntu updates are running slow again. Is it at my side; or are the servers just overloaded again? [18:34] albasheers goto synaptics kpp [18:34] Hi [18:34] I want to know how to use "Include" in my wiki page [18:34] queryboy: when you did the grub-install did you specify --root-directory=/media/root? [18:34] llutz: So, just to make sure i got it right, I should do something like this: "cp -ax / /dev/sdb1" and "cp -ax /home/SHiR0 /dev/sdb2" then edit /etc/fstab and grubs menu.lst? what about my swap, and how would i exclude copying my "home" when copying "/"? [18:34] is there a channel specific for audio problems [18:35] hello [18:35] What might cause a USB key Jaunty installer to go to initramfs busybox while starting up the livecd environment? I'm trying to get some files off an Eee PC before reinstall [18:35] !audio [18:35] If you're having problems with sound, first ensure ALSA is selected, by double clicking on the volume control, then File -> Change Device (ALSA Mixer). If that fails, see https://help.ubuntu.com/community/Sound - https://help.ubuntu.com/community/SoundTroubleshooting - http://alsa.opensrc.org/DmixPlugin - For playing audio files, see !Players and !MP3 [18:35] pepperjack; ya i just followed as said in: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows [18:35] nbranch: just a guess .. [18:36] yeah [18:36] i have a network problem [18:36] nothing is working except IRC [18:36] help please [18:36] queryboy: sorry. i have to get back to work :) maybe a reinstall would be easiest solution for ya [18:36] When I boot up on my Xubuntu 9.04 machine, the resolustion reverts back to 1600x1200 everytime. Any thoughts? [18:36] pepperjack; okk thanks [18:36] no pages are loading pinging doesnt work not even wget or lynx [18:36] albasheers goto synaptics kpp [18:37] where can i get help with ubuntu in korean? [18:37] pradeep: I am looking for an application with which I can make and receive calls on my laptop [18:37] does any1 know how to upgrade your kernel [18:38] !ko [18:38] 도움이 필요하시면 다음 채널에 조인하십시오. /join #ubuntu-ko [18:38] how does it work to "run" a DBMS on a computer (server)? === wertik_rus is now known as crazy_russian [18:38] where can i get help with ubuntu in albanian? [18:38] anonymouz: ubuntu kernel updates are coming automatically with other updates [18:39] cheers cabaro [18:39] no pages are loading pinging doesnt work not even wget or lynx [18:39] help [18:39] please [18:39] anonymouz: i do recall doing kernel updates manually with menumake, but that was redhat [18:39] anonymouz: was probably make menuconifg [18:39] I need to wipe a thumb drive that has some security software. I tired mkfs.vfat /dev/sdc but it didn't work [18:40] in the /usr/src/*LINUX [18:40] albasheers oh calls [18:40] did not knw [18:40] but is it like sip soft phone [18:40] jujubee fdisk -l [18:40] oi [18:40] pliss [18:40] olaa [18:40] cabaro: then what? How do I remove it [18:40] alguno de ustedes habla spanish? [18:41] brzil [18:41] !br | fredo [18:41] brasil [18:41] fredo: Por favor, use #ubuntu-br para ajuda em português. Obrigado. [18:41] hi folks how can i add additional IP's to my ubuntu server? [18:41] !es | beto [18:41] beto: En la mayoría de canales Ubuntu se comunica en inglés. Para ayuda en Español, por favor entre en los canales #ubuntu-es o #kubuntu-es. [18:41] Hello, I want to know if someone can tell me with channel should I join to ask a question about an Android phone? Thank you [18:41] oi [18:41] posso [18:41] thanks cabaro [18:41] pradeep:not like sip , I wana use like soft phone to dail and receive calls form my pc [18:41] How does it work to "run" a DBMS on a computer (server)? [18:41] jujubee: paste the result to pastebin.com [18:42] cabaro: http://paste.ubuntu.com/294144/ [18:43] !openchrome [18:43] Sorry, I don't know anything about openchrome [18:43] Is their any such software/hardware to make ubuntu remotely control your television channels?? [18:44] how do you mean exactly? there's hulu, and there's mythtv and freevo if you have a TV card [18:44] ok [18:44] anonymouz : sudo apt-get install girlfriend9.5 [18:44] anonymouz: lirc [18:44] jujubee: you might run gksudo gparted and make sure you are on right drive, then you can remove any existing partitions on the drive and create new one [18:44] anonymouz: you could /join #mythtv-users they might have better advise on setup [18:44] jujubee, just make sure you are not erasing your harddrive [18:44] stryt: Can you rephrase your question? [18:45] albasheers google zoiper [18:45] it is nice [18:45] red: Remote control for a laptop [18:45] ok [18:45] has anyone else had HDMI audio problems [18:45] is so tell me your solution [18:45] nbranch: avi or nvidia? [18:45] hii al [18:45] pepperjack: avi? :o [18:45] nbranch: i had a heck of a time setting up hdmi audio using open ati drivers [18:45] Has anyone else been having problems with updating Ubuntu. My updates are going at 26KBPS, and I'm not sure if it's my Internet connection or a problem with the US Archive server. [18:46] evening all === dirtyturbin is now known as homoboy [18:46] anyone know why the EC2 images don't have ext4 built in? [18:46] idwmaster: try another mirror? [18:46] pepperjack i have nvidia [18:46] I have a raid5 array with mdadm. I recently lost my main drive (my raid5 was other drives for storage). I installed mdadm and now it says "no superblock" when I try "sudo mdadm --assemble --scan", even though if I fdisk -l all the drives, the raid partition is listed. Any ideas? [18:47] nbranch: sorry im kinda tired.. id check your bios settings and then nvidia control panel. there is a setting in the control panel for digital out or something.. check control panel first === kiran is now known as Guest22091 [18:47] wow, no one knows where i can get openchrome help ? [18:47] hi [18:47] debbie2009, hi [18:48] cabaro: it failed. [18:48] jujubee: failed how? [18:48] can anyone help me install usb webcam for jaunty pls [18:48] http://paste.ubuntu.com/294149/ [18:49] what === bluebottle is now known as Guest76242 [18:50] Geforce88, I hate it when people do this to me, but... http://tinyurl.com/yzkzmeb [18:50] are their any generic linux drivers that will install it, as the manuafacturer doesny have linux on its driver downloads [18:50] jujubee: are you sure the stick is working? [18:50] Yes, I can read and copy from it in linux. JJust cannot read in windows [18:50] jujubee: this is a usb stick? [18:51] Web Cam is Sumvision Panther GT [18:51] jujubee: encrypted? [18:52] soooo disapointed 1492 and NO openchrome help [18:52] when is going to go out new version of ubuntu [18:52] (sorry i'm french) [18:52] It will be released in 14 days. [18:52] Geforce88: openchrome is a google project? [18:52] Okay, thanks. [18:52] yeah bastidrazor === cp is now known as Guest73736 [18:53] I'v chrome with de module wine [18:53] c [18:53] openchrome is the linux verison of the unicrhome via chipset drivers [18:53] debbie2009 doesn't it already work in Kopete ? maybe this url will help you > https://help.ubuntu.com/community/Webcam [18:53] what is kopete? [18:53] Geforce88: then you should look in a google help channel. since openchrome isn't ubuntu related. [18:53] kopete is a messenger / yahou IM application [18:54] oh...i trei [18:54] cabaro yes usb and I think encrypted via windows.... [18:54] i tried skype and ekiga but it cant see camera [18:54] jujubee: whats curious is that gparted failing to remove the partition.. [18:54] debbie2009, you tried emapthy? [18:55] empathy [18:55] i cant find manuafacturers linux drivers, so wondered if jaun ty had generic [18:55] cabaro: yes, I agree [18:55] jujubee: thinking.. [18:55] debbie2009 : try Kopete, or read the community info with lot of solutions [18:55] k [18:55] most webcams are generic [18:55] thanks Oer - will do know *-) [18:56] yes [18:56] jujubee: lspci do you find the drive? [18:56] I just installed texlive-fonts-extra but the new fonts do not appear on my system even after a reboot. Am I missing something? [18:56] Does anyone know why I have to set the screen resolution every time I boot up my Xubuntu 9.04 machine? [18:56] alegro, what vid card ? [18:56] I can't seem to figure out how to configure the mic input for skype, I'm seeing noise on the mic level setup in the system, but nothing is going thru skype, any ideas? [18:56] alegro: It sounds like your xorg.conf is not set up correctly [18:56] hello can i install ubunto on my pocket pc [18:57] NVIDIA RIVA TNT 2 Model 64 === tumbaman is now known as ph33r [18:57] cabaro: not sure... what am I looking for when I do lspci ? [18:58] alegro, sudo nvidia-settings - click on the save button [18:58] ok [18:58] jujubee paste the whole thing [18:58] alegro, it has to run as sudo or it wont save correctly [18:59] http://paste.ubuntu.com/294153/ [18:59] joebodo_: alegro you should use gksudo for graphical applications [18:59] !gksudo | joebodo_ [18:59] joebodo_: If you need to run graphical applications as root, use « gksudo », as it will set up the environment more appropriately. Never just use "sudo"! (See http://psychocats.net/ubuntu/graphicalsudo to know why) [18:59] doesnt matter in this case [18:59] joebodo, I don't have the proprietary drivers installed. Do you think this would solve my problem? [19:00] if you r not running the proprietary drivers - then this wont help [19:01] hello [19:01] need some help here [19:01] !ask [19:01] Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) [19:01] how do you locate the file containing the string voidptr_BackupForOriginalFunction on Ubuntu? [19:01] how do i install ubuntu on my wm2003 pocketpc [19:02] bastidrazor : openchrome isn't google related. [19:02] !pocketpc [19:02] Sorry, I don't know anything about pocketpc [19:02] !windows mobile [19:02] Sorry, I don't know anything about windows mobile [19:02] jujubee: well, im out of ideas right now. have you tried fsck the drive? [19:02] <[A]KangB> !ppc [19:02] PowerPC. Formerly used by Apple for the Macintosh line of computers. Variants are now used in popular gaming consoles. PPC was a fully supported Ubuntu architecture up to and including edgy. It is now a community port, see https://wiki.ubuntu.com/PowerPCFAQ [19:02] joedobo, I meant do you think installing the drivers would fix things? [19:02] bastidrazor : it appears you don't know about openchrome being the ubuntu version of the drivers for the via unichrome chipset [19:02] JonathanEllis: https://help.ubuntu.com/community/PortableDevices/WindowsMobile [19:03] Hi, when doing #include i m getting a "no such file or directory", i ve installed all the kernel headers, does someone know what s wrong? [19:03] LjL: Thanks but thats actually for SireOrion [19:03] if you are able to run the proprietary drivers - you should [19:03] alegro, system->hardware drivers [19:03] cabaro: what command to fsck ? [19:04] then what? [19:04] how to ssh folders on xubuntu [19:04] http://paste.ubuntu.com/294154/ [19:04] therez a problem with ubuntu 9.04 [19:04] alegro, if you driver is available - it will ask if you want to use it [19:04] Can anyone help me assemble a pre-built mdadm array? [19:05] It says: "No proprietray drivers are in use on this system." [19:06] can some one here help me with installing ubuntu on my pocket pc [19:06] Q) can you install windows drivers for usb webcam in wine [19:06] cabaro: this drive is not ext2 so what should I enter? [19:06] jujubee: so are you able to use this stick under ubuntu? windows? [19:06] SireOrion: https://help.ubuntu.com/community/PortableDevices/WindowsMobile [19:06] I can read under ubuntu and win not write under win [19:07] or ubuntu either [19:07] jujubee: does it by any chance have a write lock switch? [19:07] can someone tell me how can i get 1101ha hotkeys to work on ubuntu? [19:07] Is there a way i can make the speakers on my computer in the office play exactly the same thing that the computer in my living room is playing? Both computers are running 9.04 and connected over the LAN. [19:07] cabaro: no [19:08] hallo, kann mir jemand mit gnome panels helfen? [19:08] jujubee: physically in the stick [19:08] !de > UF-Gast167 [19:08] UF-Gast167, please see my private message [19:08] cabaro: no [19:08] !de | UF-Gast167 [19:08] UF-Gast167: In den meisten ubuntu-Kanälen wird nur Englisch gesprochen. Für deutschsprachige Hilfe besuchen Sie bitte #ubuntu-de, #kubuntu-de, #edubuntu-de oder #ubuntu-at. Geben Sie einfach /join #ubuntu-de ein! Danke für Ihr Verständnis. [19:08] jujubee: fdisk -l [19:08] jujubee: fdisk -l and paste [19:09] mneptok: oops, missed your line === Guest93713 is now known as tonyyarusso [19:09] cabaro: That command needs sudo [19:09] debbie2009, Probably, but I doubt they'd be of any use. Wine isn't deep enough into the system to allow Linux programs to access drivers, windows programs *might* be able to, but I doubt it. [19:09] pici, jujubee: my bad, sudo fdisk -l [19:09] thanks bob [19:10] http://paste.ubuntu.com/294157/ [19:10] Pici, Well your line didn't require that he understand "please see my private message" [19:10] is there an easy way to swap esc and | (pipe) keys? [19:10] what channel is the regular chat for ubuntu? [19:10] sircrazy: #ubuntu-offtopic [19:10] `thanks [19:11] jujubee: sudo mount [19:11] plz help me on thishttp://paste.ubuntu.com/294158/ [19:11] http://paste.ubuntu.com/294158/ === The is now known as Guest75385 [19:11] can someone tell me how can i get 1101ha hotkeys to work on ubuntu? [19:12] Shows: /dev/sdc1 on /media/disk type vfat (rw,nosuid,nodev,uhelper=hal,uid=1000,utf8,shortname=mixed,flush) [19:12] thebloggu, Did you try eee-control? Are you using Ubuntu, Kubuntu, Xubuntu? Intrepid, Jaunty, Karmic? Helps to be a bit more specific [19:13] jujubee, so this is definitely the stick? if so, then sudo fdisk /dev/sdc [19:13] jujubee: try deleting the partition there [19:13] bobbob1016, crunchbang based on ubuntu jaunty and already tried eee-control, my pc is not supported === kb is now known as Guest54744 [19:15] cabaro: I deleted the partition but the data is still there after removing the stick and re-inserting [19:15] thebloggu, Did you install the eee-kernel? That might help, I have a 901 and eee-control works fine, but I actually want to disable the hotkeys, and use eee-control [19:15] thebloggu, and use eee-control's hotkeys, go figure* [19:15] jujubee: i really dont know now.. [19:16] bobbob1016, :P no i didnt. how can i install it? [19:18] jujubee: i think you need to umount the drive before fdisk [19:18] thebloggu, Not sure there, I use easypeasy on my 901, so the kernel was installed already. Pretty sure it is just a matter of going into synaptic, and selecting/installing the kernel with -eeepc on it, -eeepc-lean might work too. [19:18] cabaro: I did this http://paste.ubuntu.com/294163/ [19:18] the drive was unmounted [19:20] jujubee: so fdisk also ends with failure, and the partition persists [19:20] I am trying to install a Garamond font by installing the package texlive-fonts-extra. The package installed correctly and I have also installed texlive-fonts-extra-doc but I dont know how to configure these or view the documentation [19:20] cabaro: yes [19:20] Oh and I should have mentioned the garamond font still does not appear in my applications === testssss is now known as LinDrug__ [19:21] jujubee: by any chance was this drive used as blaack box in an airplane :? === LinDrug__ is now known as LinDrug [19:21] cabaro: :D no, I don't think so... [19:21] Just used in winblows [19:22] jujubee: have you tried deleting the partition in windows disk manager? [19:22] After installing the texlive-fonts-extra package do I need to run some command to set the fonts up? [19:22] no, I don't have windows... this belongs to a friend [19:22] jujubee: we are close to sliding into offtopic here [19:24] can someone tell me where to find the opensolaris theme for gnome? [19:24] jujubee: could this stick be protected somehow? [19:24] yea, I realize that. Yes, I believe there is windows security/locking software protecting it... [19:24] He forgot the code [19:25] I tried to chmod 777 but get message "Read-only file system" [19:25] jujubee: then i guess it takes a trip to the retailer, and let them figure it out (meaning give another one) [19:25] I guess, thanks for the try [19:26] jujubee: not really ubuntu related anymore [19:26] jujubee: np, good luck [19:26] i am trying to get the ati drivers for my ati x1200, in System > Administration > Hardware Drivers.. it does not list any proprietary drivers as available.. can anyone help me with getting proprietary drivers on 9.10 for an ati x1200 [19:26] RanDom33 : Please join #ubuntu+1 for Karmic/9.10 support/discussion. [19:27] my computer's really fast with all operations, but is REALLY slow to react when it asks me for a sudo password. i enter the password, and it take about a minute, then it starts processing the command [19:27] does anyone know of a good tutorial on how to setup SVN on Ubuntu? [19:28] Python1320!! [19:28] stop following me [19:28] wow [19:28] * Python1320 hides to #gentoo [19:28] HI, i have K9MM-v MSI m/board, ubuntu 64bit jaunty installed, lspic, says this "VGA compatible controller: VIA Technologies, Inc. K8M800/K8N800/K8N800A [S3 UniChrome Pro] (rev 01)", but i cant enable desktop effects. how to install the driver [19:29] I'm always here, now I haven't been because I changed the pc [19:29] lol [19:29] i just idle here to see all those linux lulz [19:29] !ot | CPAMX [19:29] CPAMX: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics. Thanks! [19:31] hello everyone, i just finished installing a minimal ubuntu on my old desktop i am having prob with starting xserver(startx command) please advice [19:31] bonjour [19:32] Hi guys, anyone have experience with bridge and internal network in VirtualBox? I have this setup http://peecee.dk/uploads/102009/Diagram11.png and 10.0.0.5 are able to ping 192.168.1.80, but NOT 192.168.1.85. On the ubuntu server I have executed the command: echo 1 > /etc/sys/net/ipv4/ip_forward - Anyone have any suggestion how to solve the problem? I have a buddy which have same [19:32] setu, expect th e ubuntuserver is replaced with a smoothwall, and he can access the Internet from his virtual clients. [19:33] will the version of empathy in karmic support IM formatting? [19:33] at least italics? [19:33] /bold [19:33] hello, anyone know about a music producer channel on irc, that can help me??? [19:33] also, is that an #ubuntu-devel question? [19:33] will unetbootin work with a smb share target drive? [19:33] linfenix: /msg alis list *TOPIC* [19:34] i would like to paste a set of text in a bunch of files using bash. where can i read about doing that [19:34] KB1JWQ, do you know any music producer irc channel? [19:35] I installed ubuntu on a new harddrive, without my 4 mdadm raid5 drives connected. How can I add them to my fstab? [19:35] linfenix: /msg alis list *TOPIC* [19:35] linfenix: I am not alis. [19:35] KB1JWQ, ansd, who is it alis? [19:36] linfenix: A bot that describes channels on freenode. [19:38] hi all === anon_ is now known as f0rce [19:38] does anybody have a command pipeline for printing manpages 2up? [19:40] hi.i configured my printer from the administration menu and it found it ok.i connected all the wires and the green lamp is on. the problem is that when i want to print smth it says that it prints it but its not. any ideas how to detect the prob? [19:41] my computer's really fast with all operations, but is REALLY slow to react when it asks me for a sudo password. i enter the password, and it take about a minute, then it starts processing the command === cfedde_ is now known as cfedde === yofel_ is now known as yofel [19:43] hello evryone [19:43] elo [19:43] ... [19:43] eee [19:43] !hi | ubuntu_ [19:43] ubuntu_: Hi! Welcome to #ubuntu! Feel free to ask questions and help people out. The channel guidelines are at http://wiki.ubuntu.com/IrcGuidelines. Enjoy your stay! [19:43] elo mam pytanko === heroid_ is now known as heroid [19:44] hello. I've got a weird problem I've never saw before. On a fresh ubuntu install, after the computer has booted I can send about 4 ping request before I stop getting replies [19:45] no firewall is turned on [19:45] any ideas why ping would stop replying? [19:45] I had asked earlier about not having access to a raid volume.. (added a directory and gave my self rights - working great!) Also setup samba and shared the volume. The biggest road block was I didn't know my xp avg firewall was blocking the ports. Thanks again! [19:46] mweichert: which network adapter? [19:46] having a problem ... where can I create a user account to make a post in the forums ? [19:48] mweichert: is computer you are pinging on the same network? [19:48] i was running a game, and it changed the resolution of my display, what is the command to make it normal again? [19:48] cabaro, no [19:48] cabaro, the ip I'm pinging is a public static ip [19:48] mweichert: how about pinging localhost? [19:50] hello tout le monde [19:50] !fr | julienrat [19:50] julienrat: Ce canal est en anglais uniquement. Si vous avez besoin d'aide ou voulez discuter en francais, merci de rejoindre #ubuntu-fr [19:50] cabaro, on the host, I can ping localhost, it's hostname, and the static ip assigned to it [19:51] mweichert: so have you tried pinging something like google.com? same result? === sammy is now known as Guest11205 [19:52] mweichert: the destination computer might or router/gw might block the icmp ping [19:55] whats that tool to manange a firewall adm? [19:55] oh, ufw [19:56] Where can I get help with an application I can't get to launch/install? (Aptana 1.5) [19:57] anyone know how to share an Ethernet connection over wireless using Ubuntu 9.04? [19:57] quellhorst: gufw http://www.ubuntugeek.com/gufw-simple-gui-for-ufw-uncomplicated-firewall.html [19:57] aaroninfidel, Wouldn't your router handle that? Can you elaborate? [19:58] I am trying to create a partition on a drive, but it says it is in use. I am not using it, and df -l doesn't show anything using it. Any ideas? [19:58] daevski, I want to create an ad-hoc network and share the Ethernet connection with it. [20:00] bobbob1016: fuser [20:00] Where can I get help with an application I can't get to launch/install? (Aptana 1.5) [20:00] buonasera a tutti [20:00] how do i install windows without overwrighting ubuntu === max is now known as Guest66806 [20:00] HI, i have K9MM-v MSI m/board, ubuntu 64bit jaunty installed, lspic, says this "VGA compatible controller: VIA Technologies, Inc. K8M800/K8N800/K8N800A [S3 UniChrome Pro] (rev 01)", but i cant enable desktop effects. how to install the driver === Lup is now known as Lupine [20:01] daevski: try asking in here, exactly what is the problem? [20:01] Deathfox -- side by side install with the live disc [20:01] !it | max [20:01] max: Vai su #ubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! (click col tasto destro sul nome del canale per entrare) [20:01] adsfadsadsf [20:01] ciao [20:01] !list [20:01] This is not a file sharing channel (or network). If you're looking for information about me, type « /msg ubottu !bot » [20:01] c3l -- I downloaded the Standalone for linux from the website, but it is an exe and wine doesn't launch it for some reason [20:01] dae but wont it overwright the bootloader [20:01] !it | baboom :) [20:01] baboom :): Vai su #ubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! (click col tasto destro sul nome del canale per entrare) [20:02] c3l -- I'm wondering if the file download is wrong... and why it won't do anything when I try to launch the exe with wine. (two seperate issues, but one solution would be fine) [20:02] daevski: get an unix compatible app alternative! :) but if u must have that app.. well check if wine is working at all [20:03] and are you sure that the program will work in wine? but first of all make sure wine works as intended [20:03] c3l -- Aptana is the opensource alternative to dreamweaver, but it's downloaded as a exe for some odd reason -- wine is working for other apps, currently. [20:04] deathfox -- yes it over writes the boot loader -- but you can get windows to reclaim it if you want to later. [20:04] no [20:04] i got ubuntu only installed [20:04] how do i add windows do it [20:04] to it [20:05] deathfox -- windows can re-create the bootloader with a windows vista disc. [20:05] DeathFox, well it depends if you want VM or dual boot. [20:05] daevski: get the unix version, I just downloaded it and its not an exe [20:05] dual boot [20:05] ima use xp [20:06] c3l -- ah! thank you... I didn't even think to check for a unix standalone. [20:06] good night everyone [20:06] daevski: and check if there is a already working binary package for ubuntu in some repo [20:06] daevski: hehe yw [20:06] c3l -- I checked repos ... not on any for some reason :-\ [20:07] my server has the gateway listed as 0.0.0.0, and if i change it with /sbin/route add -net 0.0.0.0 gw {mygateway} eth0", it changes back when i restart. how can i solve this? [20:07] how do i turn off the temperature popping up every time it changes? [20:07] daevski: thats really wierd, you should contact the package responsible ppl [20:08] c3l -- also a good idea. thanks. [20:08] daevski: if its open source and free it should be in the repo imo.. === kmosh is now known as soni__ [20:08] FAUCK U THEN [20:09] !language | daevski [20:09] daevski: Please watch your language and topic to help keep this channel family friendly. [20:09] daevski: sorry; tab completion error [20:09] :) ok [20:10] daevski: for all I know aptana is in the archlinux user repository, not sure if its compatible with ubuntu (im an arch user mostly) [20:10] Hey guys, I need your help. I'm quite new to linux systems and I just installed fglrx on my laptop. Now everytime i boot, the bootlogo is fine, but after that, this happens: http://img392.yfrog.com/i/imgp0005t.jpg/ [20:11] Im trying to get my Verizon Mobile card to work under Backtrack (Based on kubuntu) can any one tell me how to get it to work? [20:11] What can I do? === arleslie3 is now known as arleslie [20:11] c3l -- okay. [20:11] daevski: and have you checked the universe repo? [20:12] c3l -- as far as I know I have universe enabled all the time. I can double check though. [20:12] !find aptana [20:12] Package/file aptana does not exist in jaunty [20:13] daevski: oh, I wasnt sure if its commonly used or not [20:15] Hey guys, I need your help. I'm quite new to linux systems and I just installed fglrx on my laptop. Now everytime i boot, the bootlogo is fine, but after that, this happens: http://img392.yfrog.com/i/imgp0005t.jpg/ [20:15] How do I get empathy to work with msn? === S is now known as Guest50071 [20:18] my server has the gateway listed as 0.0.0.0, and if i change it with "/sbin/route add -net 0.0.0.0 gw {mygateway} eth0", it changes back when i restart. how can i solve this? === Guest50071 is now known as kanus [20:18] hi all [20:19] uit [20:20] hi, i need help. how i can connect amarok with socks5? i can it only with http proxy. thank you and sorry for my english, i am czech :) [20:20] Hey there, could anyone help with some graphics problems, I'm using the ati proprietary driver and can change my resolution to 1440x900 with xrandr just fine, but when I add the mode to my xorg.conf and restart the screen is 1440x900, but only shows upper left chunk of say 1280x768, I was trying to follow the directions at http://ubuntuforums.org/showthread.php?t=1112186 [20:21] hi, has anybody got an idea why ubuntu would see all wireless networks in the neighborhood but not mine? and I'm currently connected to it from another computer so I'm sure it works [20:22] any recommendations on supported networked microphone & speaker setup for going over web? [20:24] hola a todos [20:24] I have Ubuntu installed on 3 machines used by a number of people and I am frequently seeing a couple of problems with Firefox. Firstly, the "Firefox is already running" problem and secondly this problem - http://ubuntuforums.org/showthread.php?p=6744603 I know how to fix these each time it happens, but does anyone know what is causing this as I don't want to have to hang around and fix it for users every time it happens. [20:25] I just can't get used to the default ubuntu mouse settings, is there a way to set it EXACTLY to default MS Windows mouse settings? [20:26] jhaig, no idea what's causing it - a possible workaround would be to create a "shortcut" for users to the command "killall -9 firefox". Best of luck. [20:26] bluetooth trouble anyone wanna help? [20:26] he he, I've had that shortcut in my menubar :) [20:28] is anyone having trouble installing 9.10 fresh from the iso? i have tried on two systems now and it wont work [20:28] t0cableguy, ask same question in #ubuntu+1 [20:28] ok [20:28] thanks [20:29] ZykoticK9: The problem isn't that firefox is still running. The problem is that it keeps leaving the lock and .parentlock file hanging around. It is happening a lot and I can find no reason why. [20:29] i need help [20:29] hey [20:29] how do i see the members list in xchat gnome version [20:29] jhaig, sorry man, i've got no idea (from experience though Firefox on linux can be a little troublesome "some" times) [20:30] woobuntu, settings, preferences, user list [20:30] woobuntu click on the users icon in the bottom left [20:30] thanks [20:30] WOW [20:30] thats alot [20:30] internet quitte inopinément [20:30] thanks bye [20:30] !fr [20:30] Ce canal est en anglais uniquement. Si vous avez besoin d'aide ou voulez discuter en francais, merci de rejoindre #ubuntu-fr [20:30] problem internet [20:31] error connecting internet why [20:31] bluetooth help anyone? [20:31] awww.... I guess I have wait till karmic comes out [20:31] i need to connect a bluetooth scanner to my laptop [20:32] There is no python-support 0.90 yet for jaunty...? [20:35] Is there a project out there like dictd that uses LMF (Lexical Markup Framework: ISO-24613:2008)? [20:35] FOSS of course [20:36] how do i change a theme in dockbarX [20:36] hello [20:37] which ubuntu cd has Mathematica MathInstaller? [20:37] on the CD? [20:37] I have 9.04 Desktop [20:37] it's not there [20:37] do I need edubuntu? [20:37] why not get it from the repository? [20:37] how? [20:38] is Mathematica MathInstaller a project? [20:38] hey I got banned froM #bash [20:38] adelie42, nop [20:38] what is it? [20:38] it should be on cd [20:38] some shell script [20:38] Has anyone successfully installed eyeOS on 9.04? [20:38] sudo apt-get intsall mathomatic ?? [20:39] joebodo, is that Mathematica 7.01? [20:39] how do I get unbanned from a channel [20:39] iElectric, not sure - you can check via synaptic package manager (in system) [20:39] scott67892: #freenode may be more help [20:40] ScottG: time [20:40] I'm trying to switch layout by console. I wrote "setxkbmap -layout "ru,us" -option grp:caps_toggle. It switches layout to ru, then, after pressing caps, it switches to us, then caps doesn't switch back to ru, but capitalize letters. How can I fix it? === kaie is now known as Guest42055 [20:41] blah, everywhere on internet I read it should be on === cHarNe2__ is now known as cHarNe2 [20:41] dir /media/cdrom/Unix/Installer [20:41] but there is no Unix directory:) [20:41] !return | iElectric [20:41] iElectric: Please try to keep your questions/responses on one line - don't use the "Enter" key as punctuation! [20:42] I have a Dell Inspiron e1505 with what appears to be an Intel 3945 wireless card; ubuntu 9.04 current/updated. The wireless card cannot be turned on with the key combo "Fn+F2", but under the same 9.04 CD running as live-user, it can be turned on. HOW do I get this doggone thing turned on? [20:42] iElectric: that directory indicates you should have a CD of said program [20:43] anyone know how to erase history in Empathy ? [20:45] Is there a FOSS project out there like dictd that uses LMF (Lexical Markup Framework: ISO-24613:2008) to make it parsed for specific info rather than the block plain text format? [20:46] can someone tell me how to fix the hotkeys lenovo sl500? [20:46] iElectric: as bastidrazor says they mean for you to find this directory on a Mathematica cd, if you have an iso, you'll need to mount that first and then find the proper directory. [20:46] anyone has an idea about any application for Ubuntu that handles circuit boards especifically PIC [20:46] ? [20:47] Hi. I'm installing an application from CDROM, and the install software is asking me to insert disk two... When I try and eject disk one, I get an error: Cannot unmount volume, An application is preventing the volume '' from being unmounted. ok. ... If I tru and sudo unmount /dev/cdrom I too get an error... How can I move forward with this install ? [20:47] I cannot get sound when I played tv with my bttv tuner card of 'kworld'. My motherboart is intel 946gzis and onboard soundcard is 'sigmatel'. The sound output jack of bttv card is connected externally by a jack with sound input of my motherboard. Both the card behaving normal when taken individually. But when connected as mentioned there is no sound output of tv channels where video is ok. The connection is doing absolutly perfect performance with window xp. Anyb [20:47] This is a wine application [20:47] !wine [20:47] WINE is a compatibility layer for running Windows programs on GNU/Linux - More information: https://help.ubuntu.com/community/Wine - Search the !AppDB for application compatibility ratings - Join #winehq for application help - See !virtualizers for running Windows (or another OS) inside Ubuntu [20:48] thanks, I know what wine is [20:48] !wine | Whitor [20:48] Whitor: please see above [20:48] Whitor, I was refering you to the winehq channel :) [20:48] Armageddon: Dia has some of the functionality [20:48] oh . sure, thanks [20:49] Armageddon: Tried it ? [20:49] WanHouse, no not yet, I'm asking about applications that I can use as a computer engineer [20:49] WanHouse, how about gEDA ? [20:50] Armageddon: It can be used to write computer wiring schemas also. Havnt tried that one. [20:50] Armageddon: Heh. I was just over building a slax ISO at slax.org and passed over some application that advertised itself as a circuit board engineering tool. Dunno about the "PIC" part. Trying to re-trace my browser history to find it. [20:50] my firefox doesnt see java, how can i fix it? [20:50] tbx would be nice to find some stuff [20:50] Armageddon: www.freshmeat.net rocks for your purpose [20:51] !java [20:51] To install a Java runtime/interpreter on Ubuntu, look at https://help.ubuntu.com/community/Java - For the Sun Java runtime install sun-java6-jre from the !Multiverse repository [20:51] werfact, install java plugin, should be installed if you installed all the restricted extras [20:51] !restricted | werfact [20:51] werfact: For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also https://help.ubuntu.com/9.04/musicvideophotos/C/video.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats [20:51] Armageddon: KTechLAb [20:51] Armageddon, i installed java sdk, so i think jre is part of that [20:52] jdk [20:52] tbx for KDE right ? [20:52] Armageddon: "KTechLab is an Open Source IDE and Simulator for Digital & Analog Circuits and PIC Micro-controllers. Featuring an extensive circuit designer with autorouting and simulation of many common electronic components and logic elements, KTechLab is the idea tool for educational or hobbyist use." [20:52] nobody with ah sl500 ??? [20:52] tbx I will write those down [20:52] Armageddon: http://www.slax.org/modules.php?search=circuit&category= [20:52] does anybody knows C or C++? [20:53] !poll [20:53] Usually, there is no single "best" application to perform a given task. It's up to you to choose, depending on your preferences, features you require, and other factors. Do NOT take polls in the channel. If you insist on getting people's opinions, ask BestBot in #ubuntu-bots. [20:53] Um_cara_qualquer what for ? [20:53] !anyone [20:53] A large amount of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? [20:53] Um_cara_qualquer: dont ask to ask, just ask. [20:53] i need assistence for a particular program i'm doing [20:53] Soo firefox 3.0 is the latest in the repositories? [20:53] i asked [20:54] zaoul, download and install the .deb file from mozilla's website [20:54] Um_cara_qualquer, assistance with what? [20:54] zaoul, ff 3.5.3 is in karmic [20:54] C program [20:54] !ff35 | zaoul [20:54] zaoul: Firefox 3.5 Final is available for Jaunty by installing the package firefox-3.5 and firefox-3.5-gnome-support | FF3.5 is referred to as Shiretoko in your UI, see http://is.gd/1reB3 for an explanation | Hardy & Intrepid: http://is.gd/1jkNY [20:54] Um_cara_qualquer, put the code in pastebin and ask the question, or joint the ##c channel, === Enissay_ is now known as Enissay [20:55] karmic is a 'bleeding-edge' repository? [20:55] ok [20:55] !karmic [20:55] Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [20:55] how do i add something to my path [20:56] I am waiting for Karmic impatiently [20:56] oh arg [20:56] http://pastebin.com/d3bcd1ee5 [20:56] I just installed too === werfact is now known as idetify [20:56] panfist something like what ? to what path ? === idetify is now known as wergact [20:56] I am having the flickering mouse cursor + firefox bug problem [20:56] Bug #310020 [20:56] armageddon if i want to type a command with typing the full path === wergact is now known as werfact [20:56] in function "remover"... by the way is portguese language... i wanna know if there's some problem to remove any item from the list [20:56] Um_cara_qualquer what's the problem ? [20:56] in bash [20:57] well it seems to be different than just over a link [20:57] panfist I don't understand ! try the tab key to complete the path [20:57] Hey I'm having some video issues, can someone help me with that? [20:57] RyNo: Just ask! [20:57] !pt | Um_cara_qualquer [20:57] Um_cara_qualquer: Por favor, use #ubuntu-br para ajuda em português. Para a comunidade local portuguêsa, #ubuntu-pt. Obrigado. [20:58] shouldn't be hard to understand it [20:58] I have a radeon HD 4350 and I have no TV-out capability. I've tried adding the catalyst control center from add/remove programs and my screen went nuts and I had to reinstall ubuntu. Any other options? [20:59] I tried adding the ATI binary x.org driver too and it did the same thing [20:59] armageddon when you type the command 'apt-get' it doesnt matter what director you are in, you never have to type '/usr/bin/apt-get' you just type 'apt-get' and the shell knows to look in /usr/bin [20:59] WanHouse, is helping me... thx everybody [20:59] RyNo, sudo apt-get remove fglrx-driver [20:59] RyNo use the fglrx drivers for ATI, I have the same problem there are no drivers from ATI to their cards [21:00] The outputs are initialized at boot, so if you remove your tv out and reboot it should revert back to vga [21:01] apt get remove? [21:01] Um_cara_qualquer, what is nodo*? [21:01] i put that ina dn it said it wasnt installed so it wasnt removed [21:01] RyNo, sudo apt-get remove fglrx-driver [21:01] RyNo removes the packages [21:01] apt-get remove spanglish [21:01] xD [21:01] apt-get remove gue-guevara [21:02] apt-get remove fidel-castro raul-castro [21:02] alteregoa easy [21:02] apt-get install democracy justice freedom [21:02] !ot | alteregoa [21:02] alteregoa: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics. Thanks! [21:02] alteregoa does anyone needs to install some glue to your mouth ? [21:02] ok so what do i need to so in order to install the driver needed for tv-out support? === infidel2s is now known as infid [21:04] what do I need to do in order to get tv-out support for my card? [21:05] ryno: you need a tv-out plug [21:05] back finally got my damn optical mouse replaced [21:05] RyNo, you are retarded!!! [21:05] by logitech [21:05] erikk71, good job [21:05] thank you bagy [21:05] xD [21:05] and you tooa altergoa [21:05] erikk71, you needed a mouse to use a computer? [21:05] toga? [21:05] no im not from toga [21:05] I have a problem with my 'kworld' bttv tuner card. When I watch tv with this card there is no sound coming out from my soundbox, which always does in window xp. My desktop motherboard is intel 946gzis and its sound input jact is connected with an external wire loop with bttv sound output jack. [21:06] everybody says im wrong [21:06] for bitching to logitech [21:06] erikk71, well if their product sucks, you should bitch, otherwise they wont fix it [21:07] i use lubuntu, its ok [21:08] had to threaten them [21:08] \with a big fax [21:08] alright so I did the apt-get remove fglrx-driver and all it did was ubinstall something that wasnt there [21:08] !tvout | RyNo [21:08] RyNo: For help with enabling the TV-Out, see https://help.ubuntu.com/community/NvidiaTVOutNewbieEdition (Nvidia cards) or http://wiki.cchtml.com/index.php/Tvout (ATI cards, *untested*) === william is now known as Guest94489 [21:10] How can I install some package into ~/lib using apt? I don't have root. [21:10] got a problem, whenever i press the "recycle bin icoon", my desktop gets BLANK (all icons gone), and i cant left-click, and the dustbin-window never shows up, and the desktop stays blank until i restart.. help? [21:11] hey guys, is the default file browser in Xubuntu, Thunar?? [21:11] p25017: without root you can not use apt-get .. [21:11] bastid_raZor: thx :-/ [21:12] p25017: i assume you've tried the entire command 'sudo apt-get install packagename' ? [21:13] RyNo, try this apt-get remove xorg-driver-fglrx [21:13] bastid_raZor: I didn't try it, because I don't have root. [21:14] how do I change my nick in chat? === kmosh is now known as soni__ [21:14] p25017: okay, just wanted to make sure you understood sudo was the way to get root permissions. [21:14] !nick [21:14] Information about registering your nickname: http://freenode.net/faq.shtml#userregistration - Type « /nick » to select your nickname . Registration help available in #freenode === a_ is now known as neat [21:17] please help! I can't get ubuntu to recognize my external drives. I want to add write permissions to them. [21:18] Hello all [21:18] hi black [21:18] === kmosh is now known as soni__ [21:19] Could anybody help? There is stndard program for pdf view in gnome. How it's exactly named? [21:20] black_bu: isn't that evince ? [21:20] !info evince [21:20] evince (source: evince): Document (postscript, pdf) viewer. In component main, is optional. Version 2.26.1-0ubuntu1 (jaunty), package size 733 kB, installed size 5528 kB [21:20] I am unable to post to ubuntu forums any ideas why? thanks [21:21] gslauen: Yes... It is. Thank you so very much [21:21] black_bu huh????????????????????? [21:22] gslauen, have u registerer / logged in ? [21:22] joebodo_: yes registered and logged in === joe75_ is now known as joe75 [21:23] gslauen, some threads get locked [21:24] i am new to ubuntu; have set it up as a file and print server with samba; and opened the four ports suggested in ufw. all works with the firewall disabled but I can not see the shared files on the windows machine with the firewall enabled. any suggestions? [21:24] joebodo_, ya I can't figure it. Anyway my real problem is trying to get a serial irblaster to run using myth_ledxmit script and I keep getting errors and cant run make install [21:27] hi everybody [21:27] does anybody knows an remote access application called NTRConnect ? [21:27] i want to view pdf files can ubuntu do so ? [21:28] Hi can anyone tell me how to get parental controlls for my internet? [21:28] off course ubuntu read pdf files [21:28] kraito: evince is a pdf viewer. There are others. [21:28] Abend allerseits... [21:29] !pdf | jhaig [21:29] jhaig: pdf is the Portable Document Format created by Adobe; viewable in GNU/Linux with xpdf/kpdf/okular/evince, and also adobe reader (free download, but closed source) [21:29] !de | guest_ [21:29] guest_: In den meisten ubuntu-Kanälen wird nur Englisch gesprochen. Für deutschsprachige Hilfe besuchen Sie bitte #ubuntu-de, #kubuntu-de, #edubuntu-de oder #ubuntu-at. Geben Sie einfach /join #ubuntu-de ein! Danke für Ihr Verständnis. [21:29] guntbert: Thanks. I was answering someone else's question. :-) [21:29] how stable is the latest 9.10 beta? [21:29] dfadf [21:29] anybody knows NTRConnect wich works on linux? [21:29] I cant upgrade to 9.04 it kills intel [21:29] it kills intel good [21:30] i am the world greatest hacker... bye bye... we see us!!! XXXMorseRXXX [21:30] jhaig: sorry, my brain is obviously too slow for my fingers.... [21:30] "it kills intel" ? [21:30] yep [21:30] intel integrated gfx [21:30] what on earth does that mean [21:30] aha! [21:31] jhaig: thanks === Amaranth_ is now known as Amaranth [21:32] HI all [21:32] Anyonw knows why I get this: [21:32] warning: preg_match() expects parameter 2 to be string, array given in /var/www/drupal/includes/bootstrap.inc on line 777. [21:32] When I do this: [21:32] $form['field_assembly_root']['#type']='hidden'; [21:32] can anyone help with ufw ports for file sharing with windows using samba? [21:32] command to reinstall plugins on compiz > animation [21:32] where $form['field_assembly_root'] is a CCK node reference [21:32] ? thanks [21:33] oops wrong channel [21:33] sorry [21:33] how do i install adobe photoshop using wine ? [21:33] !appdb | enatom helpful links here > [21:33] enatom helpful links here >: The Wine Application DB is a database of applications and help for !Windows programs that run under !WINE: http://appdb.winehq.org - Join #winehq for application help [21:33] kraito: aptitude install compiz-fusion-plugins-main [21:34] allen : install ufw manager gufw [21:35] got to love irssi :) [21:36] so....anyone know how stable the 9.10 beta is? [21:36] !9.10 | maheshjr2000 [21:36] maheshjr2000: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [21:36] hlw all [21:36] hello, is it possible to create a Ubuntu live cd with additional packages installed? [21:37] i just installed the latest ubuntu version [21:37] alot of problems [21:37] how i go to offtopic room? [21:37] borno: /join #ubuntu-offtopic [21:37] my laptops screen light wont change [21:37] !remaster | pete1 [21:37] pete1: Interested in remastering the Ubuntu !live CD? See: https://help.ubuntu.com/community/LiveCDCustomization or use tools such as http://uck.sourceforge.net/ or http://linux.dell.com/wiki/index.php/DRU_Disc_Remastering_Utility [21:38] hi, is it okay if i ask about squid here? since nobody answer at #squid and i'm using squid on ubuntu [21:38] thanks [21:38] HOW DO I CHANGE THE DARKNESS ON MY LAPTOPS SCREEN [21:38] i'm getting this error "2009/10/16 03:17:59| clientNatLookup: NF getsockopt(SO_ORIGINAL_DST) failed: (92) Protocol not available" [21:39] i try to change the screen contrast, using my laptop & ubuntu, and the screen doesnt change [21:39] dunno what happened [21:39] !caps Z| enatom [21:39] Sorry, I don't know anything about caps Z [21:39] hi [21:39] !caps | enatom [21:39] enatom: PLEASE DON'T SHOUT! We can read lowercase too. [21:39] sorry [21:40] oh well, i think i should go somewhere else. or perhaps downgrade squid to 2.8 :( [21:40] ia.com [21:40] thanks btw [21:40] :) [21:40] i/server gay-serbia.com [21:41] Slt [21:41] hi folks i ran htpasswd -c /public_html/.htpasswd username and set password. however when i access my site, it doesn't prompt me forlogin and password [21:42] can anyonereccomend a better phpeditor than gphpedit or bluefish? cant get used to kdevelop either... theres gotta be more right? or do i have to go back to vi? [21:43] discipolo: vi [21:43] Can anyone refer me to a pppd script for Verizon Mobile Broadband/EVDO/3G [21:44] discipolo: maybe eclipse with some php plugins? [21:44] hell [21:44] hm [21:44] Can somebody paste the output of "perl -V:installarchlib" from different Ubuntu releases? And where is "ExtUtils/typemap" located at the different Ubuntu releases? [21:44] please i have no free space in my partion [21:44] discipolo: geany? [21:45] how to fix broken zip archives, but the problem is that there are two 001 and 002, like they are connected? [21:45] geany... huh will try thx [21:45] bonsoir [21:45] soir [21:45] discipolo: tru [21:46] discipolo: netbeans [21:46] how i can do this problem [21:46] wow, so there are mre! [21:46] more [21:46] y a t il des français [21:47] !fr | jpchateau [21:47] jpchateau: Ce canal est en anglais uniquement. Si vous avez besoin d'aide ou voulez discuter en francais, merci de rejoindre #ubuntu-fr [21:47] ok merci [21:47] how do i lower the screen brightnesse ? [21:47] how do i lower the screen brightness on 9.04 ? [21:48] How do i lower the screen brightness ? [21:48] on my laptop [21:48] im using ubuntu 9.04 [21:48] fn+ [21:49] please don't spam the channel [21:49] !spam [21:49] Sorry, I don't know anything about spam [21:49] !flood [21:49] pastebin is a service to post multiple-lined texts so you don't flood the channel. Ubuntu pastebin is at http://paste.ubuntu.com | To post !screenshots use http://tinyurl.com/imagebin | !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic [21:49] whatever, you get the idea [21:51] I've searched around, but it's difficult to figure this out. I have 3 computers (two using *buntu 9.04, and the other openSUSE, all 3 have rsync and grsync installed). I also have a FreeNAS box connected to the network. How can I have all 3 of my /home/username directories mirrored with the FreeNAS box, without deleting files from my 3 PCs? [21:52] flanders, cron job? [21:52] my server has the gateway listed as 0.0.0.0, and if i change it with "/sbin/route add -net 0.0.0.0 gw {mygateway} eth0", it changes back when i restart. how can i solve this? [21:53] In other words, I do some things on PC #1, then a few things on PC #2, and I run rsync on them, which updates the CIFS share on the FreeNAS box, as well as transfers any new/updated files back to the source (PC #1, or PC #2, etc) [21:53] flanders, interesting question... I have a similar setup, but I use unison as it pleases me [21:53] But Unison will only work between 2 systems? If you introduce a 3rd or 4th...? [21:53] good point... [21:54] cron the rsync... maybe? [21:54] it'll be interesting to get other's opinions on this topic [21:55] hi i want to know if i can set up a user on a server then have that user profile avaiable on all network machines [21:55] The best example I can give is the Xmarks addon for Firefox. If I use 100 different PCs, running the Xmarks sync (on any, and even all PCs) will copy any new bookmarks to the Xmarks server. At the same time, any missing bookmarks on the PC will be downloaded from the Xmarks server. It's a 2-way sync. [21:56] hi, i want to tar a folder without taring the .svn hidden folders how can i do that? === peter is now known as Guest86082 === Guest86082 is now known as peterrr [21:56] https://help.ubuntu.com/9.04/serverguide/C/drbd.html if you want to replicate block devices [21:57] CaptainMorgan, seems that the only way to do this with rsync is to run 2-passes, switching the "source" and "destination" directories. [21:57] CaptainMorgan, there doesn't seem to be any way to do it all in one pass. [21:57] subito: tar -cvf file.tar /path/to/backup [21:58] someone help ? [21:58] plz............... [21:58] ActionParsnip: backup? [21:58] which mail server does the "mail server" option of ubuntu-server's installation use? [21:59] my server has the gateway listed as 0.0.0.0, and if i change it, it changes back when i restart. how can i solve this? [22:00] subito: the folder you want to tar [22:00] Is there a way I can set up my rsync script so it checks to make sure the drive is present BEFORE the rsync command kicks in? And if it's not, it fails? [22:00] who needs an invite for lockerz? [22:00] how can i set up network users from a network server? [22:00] enatom: are you on a laptop or a desktop? [22:00] gerald_ with samba? [22:00] ActionParsnip: i know but my folder has a lot a .svn hidden files in it (at each level in each subfolder) [22:01] dabukalam, im on a laptop [22:01] and i don't want to add them to my tar [22:01] anyone know where gnome alarm clock gets its time from? [22:01] enatom: do you see an "Fn" key on your keyboard? [22:01] yeahs [22:01] i have an ubuntu server and some ubuntu desktops / laptops so i am using nfs [22:01] dabukalam, yeahs [22:01] dabukalam, i change it, but the screen light doesnt change [22:01] i want to mange all users from a central source [22:01] enatom: what colour is it? [22:02] subito: then create the file then extract it elsewhere (or on another system) you can see what was then achived [22:02] dabukalam, the fn key is blue, on the keyboard [22:02] subito: may help: http://www.linuxquestions.org/questions/linux-general-1/tar-and-hidden-files-309372/ [22:02] dabukalam, im using 9.04 ubuntu [22:02] enatom: somewhere, probably on one of the f keys, is a sun [22:03] ooh [22:03] hello [22:03] Roasted: Did you have any luck with the virus by the way? [22:03] enatom: push fn with the sun pointing up, and your brighness will increase [22:03] dabukalam, yeahs i know, i told you, i use that key, and the notification shows that im changing it, but the screen actually doesnt change [22:03] dabukalam, that is not working, even when i do that [22:03] ActionParsnip: so what? even though the hidden files are listed during the taring (with the verbose mode) they are not in the tar? [22:03] dabukalam, even when ubuntu is saying the screen is getting lower, its not actually changing [22:03] sebsebseb - ACtually I stuck with ClamAV - and it DID indeed take care of Conficker. [22:04] Roasted: good [22:04] conficker? [22:04] alteregoa: yes? [22:04] sebsebseb - The ClamAV GUI from the Ubuntu wiki and the ACTUAL program looks very different, however my virus definition was up to date and it zapped it. [22:04] :-) [22:04] enatom: do you have another OS? [22:04] i never had viriis with *nixes [22:04] enatom: or another install of a different release? [22:04] dabukalam, yeahs, it works well on Vista, but not ubuntu [22:04] alteregoa - Nor have I. [22:04] alteregoa: and? [22:05] alteregoa: You can use Linux to remove Windows viruses [22:05] windows is a virus [22:05] alteregoa - I just have an infected flash drive with a Windows virus on it. I wanted to scan it through Ubuntu since the virus wouldn't effect Linux [22:05] alteregoa - I was in hre last night asking about Linux virus scanners that might do what I need and ClamAV ended up fitting the bill. [22:05] anyone here use wxwidgets? i can't seem to get my program that requires it to install...what is the proper way to install wxwidgets? [22:05] yeah, clamav or fsecure [22:06] ActionParsnip: i don't understand, if i tar -cvjf i got the hidden files [22:06] sebsebseb - I actually dug up 16 viruses on my samba network drive, which is where all of the XP machines on my network back up to every night, so it was nice to dig them out of the backup drive too. [22:06] join #ubuntuofftopic [22:06] well my fw has a transparent proxy it scans the traffic on the fly for virusses, incl. https traffic [22:06] hey [22:06] Roasted: That's not good to have viruses on a backup drive [22:07] ActionParsnip: even with your command: tar -cvf i got the hidden files; but i don't want them in my tar [22:07] my server has the gateway listed as 0.0.0.0, and if i change it, it changes back when i restart. how can i solve this? [22:07] how can i join ubuntu offtopic room? [22:07] borno type /join #ubuntu-offtopic [22:07] borno: /joing #ubuntu-offtopic [22:07] borno: You were there ealier... [22:07] dabukalam, anyhelp then ? [22:07] without the g [22:07] dabukalam, it works ok with Vista [22:07] sebsebseb - Naw. Luckily in my case though, the infected files were in a share from a friends computer I worked on a month ago, so the infected files werent FROM my XP machines here, but it was still nice to see an infection on my samba drive and clamav get rid of them. It also verified that there werent any viruses that came from my XP machines here, so all is good. [22:07] yeah follow actionparship [22:07] without the n [22:08] sorry i disconnect :( [22:08] anyone gotten fallout 3 to run? [22:08] how do I change the sound the system-beep makes? [22:08] enatom: aorry, it's obviously a problem with the OS, but i don't know how to help... try googling it... (please don't flame !google me people) [22:08] Roasted: You mean not nice to see an infection, but your happy that clamav got rid of them? [22:08] please for last time [22:08] you can install ubuntu satanic edition [22:08] ubuntu satanic edition is great [22:08] sebsebseb - yeah, that. :P Its been a long day. [22:08] no other idea? [22:09] borno: Type: /join #ubuntu-offtopic === hellmitre_ is now known as hellmitre [22:09] thanks [22:10] how can i tar a folder without including the hidden files? [22:10] Roasted: Apparantly formatting is the only true way to make sure things like that are properly removed though [22:11] sebsebseb - oh yeah, I understand. [22:11] seems like satanic edition has the same console beep [22:11] subito delete the hidden files [22:11] alteregoa: not an option ... it's an svn folder, i don't want to delete the .svn folders [22:12] hmm [22:12] just move the visible files temporary with mc [22:13] sudo apt-get install mc [22:13] tar it, and move it back [22:14] alteregoa: tar --exclude='.*' -cvjf tarfile.tar.bz2 folder/ works :) [22:14] 3hi, i just installed quake 3 package in Jaunty [22:15] anyone know the command to start quake3? [22:15] subito: was about to suggest it, even though it doesn't make a ton of sense [22:15] disciplezero: why? [22:15] it a traditional posix system .* would include ./* [22:15] I have an older BIOS that does not allow booting from a flash drive. Can i use GRUB to allow me to boot from flash drive? [22:16] in* [22:16] Does anyone know if apt will be able to use the cache from one installation on a completely different installation, if I move the folder that contains it? [22:16] enatom: aorry, it's obviously a problem with the OS, but i don't know how to help... try googling it... (please don't flame !google me people) [22:16] my server has the gateway listed as 0.0.0.0, and if i change it, it changes back when i restart. how can i solve this? [22:17] I have an older BIOS that does not allow booting from a flash drive. Can i use GRUB to allow me to boot from flash drive? [22:17] PCTeacher012, I doubt it [22:17] PCTeacher012, did you check if there is a bios update at all? [22:17] is there a Tor package? [22:17] Because windows programs like "Smart BootManager" allows it to whether or not the bios does [22:18] or is it "download it yerself"? [22:18] PCTeacher012, oh? mmm then I am not sure [22:18] and coz_ I could not because in no way shape or form can i figure out the model of my (Dublin) motherboard [22:18] hi all, where is the config file that sets the global enviroment vars [22:18] Zzeiss, https://help.ubuntu.com/community/TOR [22:18] I know the BIOS is Pheonix but they can not issue updates, only the manufacturer of the motherboard (dublin) can [22:19] I need to install a a .deb file but I keep getting an error message, im not sure what the problem is I removed the existing software so it wouldn't conflict but I think it is [22:19] PCTeacher012, ah mm let me see if there is a way to identify mother boards I used to know hold on :) [22:19] .dmrc? [22:19] coz_ Turn your computer off [22:19] Turn it back on [22:19] It should say so in the BIOS [22:19] just fyi, imhee is a bot msging people on join to a 'mp3 download [22:20] Purpley, oh yeah but there is also an application or terminal command for this [22:20] And i have one more problem. I tried moving my /home to a seperate partition, but it did not exactly work. On every boot, it informs me it "could not load home from /" even though when i go to terminal through failsafe it goes to my home that is on the partition. What is wrong? [22:20] website [22:20] coz_: I think it is lshw but it does not show it [22:20] well, sudo lshw [22:20] PCTeacher012, try sudo mdidecode | more [22:20] nono [22:21] PCTeacher012, try sudo dmidecode | more [22:21] PCTeacher012, you could give lspci a shot. It might give you a clue [22:21] I am on LIVECD btw ;) [22:21] PCTeacher012, well see if that command works sudo dmidecode | more [22:22] coz_: It did, and all it gave me was the serial number [22:22] which is obviously wrong: I doubt "0123456789" is my serial number for it :\ [22:22] PCTeacher012, do a google with that serial number and name of motherboard manufacturer [22:22] http://dmhee.blogspot.com/ [22:22] Hey guys, I have a .sh script that i need to run but I cant find the option to run it in the terminal [22:22] PCTeacher012, also hit enter to get more info from that [22:23] PCTeacher012, sudo lshw is where i can find my info [22:23] I did, nothing else referring to motherboard [22:23] lexvegas: Doesnt show model [22:23] Help guys [22:23] Purpley, right click the script go to permissions tick the box for execute [22:24] Purpley, then open a terminal cd to it's location ./scriptname [22:24] With sudo lspci i get "Host bridge" and "PCI bridge" neither being motherboard :\ [22:24] ahhh forgot sorry [22:24] hello... I upgraded an old redhat 9 machine to ubuntu server, and I'm having trouble mounting the drive of a win2k machine like I did on rh9. [22:24] All i need is to figure out how to fix my failed /home partition so i can get on my original ubuntu installation. I hate restoring :\ [22:24] On rh9, I used the following command: [22:24] mount -t smbfs -o username=Administrator,password=password //win2k/c /mnt/win2k [22:24] but this gives an error. I can sucessfully browse the drive with smbclient: [22:24] smbclient -U Administrator //win2k/c [22:25] PCTeacher012, https://help.ubuntu.com/community/BootFromUSB [22:25] this works fine [22:25] trwww: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [22:25] coz_: Opening [22:25] PCTeacher012, not sure if any of that will help but is seems to explain some options [22:26] Does anyone know if apt will be able to use the cache from one installation on a completely different installation, if I move the folder that contains it? [22:26] coz_: It does, i am gonna write it down :p [22:26] PCTeacher012, cool :) === akgraner_ is now known as akgraner [22:26] hello [22:27] lexvegas, I am not sure but you can give it a try! backup the one that you are going to send it to [22:27] where is menu.lst found in ubuntu (for grub) [22:28] PCTeacher012, /boot/grub/menu.lst [22:28] coz_, should i copy my sources files too, or just the folder with the cache? [22:28] coz_: Okay, ill look thanks [22:28] coz_: It did not mount my main hard drive :\ [22:28] lexvegas, mm this one I am not sure on but as long as you have the current ones backed up it should be easy to revert back if it doesn work [22:29] PCTeacher012, ooo [22:29] My filesystem is saved on /dev/sda1 but it can not locate it? [22:29] hi, I'm running ubuntu 9.04, and for some unknown reason my /etc/init.d/apache2 gets overwrite every 3-5 reboots, it goes to /etc/init.d/apache2.X where X is an integer, so it doesnt boot at start up, I've checked the permisions and they both have the same, I've not upgrade the apache deamon, so I've no idea why is this happening, any help is welcome [22:29] coz_, okay. Thanks. I'll give it a shot. [22:29] PCTeacher012 you could try the SuperGrub disk, google to d/l it [22:29] PCTeacher012, what you may want to do is go to the #linux channel and ask there...they tend to have a broader knowledge base of experience for some things :) [22:29] coz_: Okay, thanks. Is it on irc.ubuntu.com also? [22:30] CavalierPrime: I have no free CDs right now :( [22:30] coz /join #liinux [22:30] or DVDs. My comp dont even have a DVD Drive D: [22:30] PCTeacher012, yeah where you type here just type /join #linux [22:30] how do i play a dvd? [22:30] PCTeacher012, it may be ##linux [22:30] coz_: Okay, ill try it [22:30] i got a disc drive but i put the dvd in and i cant figure out how to play it [22:30] it was ##linux :p [22:31] PCTeacher012, I kinda thought so :) [22:31] !vlc | corey_ [22:31] corey_: Audio (Ogg, MP3...) players: Audacious, Banshee, Beep Media Player, Listen, Quod Libet, Rhythmbox, Exaile, XMMS2 (GTK/Gnome based) and Amarok, JuK (Qt/KDE based). Video players: Totem, Xine, MPlayer, VLC, Kaffeine - See also !codecs [22:31] ? [22:31] i need help [22:31] thanks coz_ [22:31] yo sumone tell me how to play dvds pleae [22:32] nice one http://www.networkworld.com/news/2009/101509-microsoft-apology-sidekick-tmobile.html?fsrc=netflash-rss [22:32] !dvd [22:32] i just changed sudoers file, do changes happen instantly? [22:32] For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also https://help.ubuntu.com/9.04/musicvideophotos/C/video.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats [22:32] dumont: open a new terminal and it will take effect [22:32] sum one tell the robot he aint helpin [22:33] i got a prgram for it to play it [22:33] but how do i play it? [22:33] what program, corey_ ? [22:33] its just called movie player [22:34] i think you miss the codecs then [22:34] hello [22:34] bastid_razor, i'm changing user permissions for a service, do i just restart the service? [22:34] !home [22:34] Your home directory is where all of your personal files are usually kept. For moving your home directory to a separate partition, please see: http://psychocats.net/ubuntu/separatehome [22:34] please iam new user ubuntu 9.04 gnom [22:35] i was install ubuntu in partion 32 gega [22:35] PCTeacher012, I just want to warn you that on ubuntu 9.04 it is grub legacy however if you later intall ubuntu 9.10 you will be dealing with grub2 and that is a completely different animal in terms of edition the grub files [22:35] but now i havent free space in partions === BeardedAdmin is now known as BeardedAdmin_Awa [22:35] i need a plugin for youtube videos === BeardedAdmin_Awa is now known as BeardedAdmin [22:35] please help me [22:36] PCTeacher012, rather editing the files I meant [22:36] coz_: Is it possible to update to grub2 in ubuntu jaunty === liar|school is now known as liar|netbook [22:36] #gentoo [22:36] PCTeacher012, ah I am going to be it is let me check [22:36] I'll just start a reinstall of ubuntu... lol [22:37] PCTeacher012, it is apparenlty possible if you google ubuntu 9.04 install grub2 you should get many hits [22:37] coz_: Okay, i will try, after i reinstall ubuntu :p [22:38] PCTeacher012, if you then have issues with grub2 you can go to the #grub channel for help :) [22:38] coz_: Okay, thanks :) [22:38] Anyone know if an open-source phone is being released for verizion anytime soon? [22:39] I want the G1 but I cant switch to T-mobile :( [22:39] Hi - got a wierd thing going on with my ubuntu 9.04 desktop. There are no options in the applications menu. don't know what I did... [22:40] anyone got any ideas? [22:40] right click on applications and edit menus and look at what is checked [22:40] does anyone know a software that recovers a broken zip archives, but the zip archives are connectedo to each other, like 001, 002 and so one, splitted [22:41] how do you resolve issues with the eth1 not possible to bring up ? it worked perfectly in my ubuntu until tonight.. [22:41] CavalierPrime: i'll try that - i'll just remote onto it - got to use a windows vista laptop at the moment [22:41] I tried restarting the network.. no success [22:42] it's eth1 it's on, not eth0.. looked at different google sites.. but stil, this remains [22:43] CavalierPrime: yeah - right clicking doesn't do anything [22:43] please someone ? I'm trying to complete work before my deadline.. [22:43] coutamike: no idea then, sry [22:43] CavalierPrime: no worries [22:43] thomazz: your question doesn't really make sense to me, try re-wording it [22:44] okey [22:44] hi, [22:45] yes i test jolicloud [22:45] my network doesn't work. the error message I get when using the command: "sudo /etc/init.d/networking restart" is the following: Can't allocate interface eth1lease { interface . Failed to bring up eth1 [22:45] hy i have some plb whit my ssh i have open 22 port i get time out === jianshi is now known as synthesis [22:46] hey, can someone give me a short hint or something? my friend can't boot windows (not even from disk oO) or mount his ntfs partition because of a boot sector error, is there a way that we can save his data out of ubuntu? ntfs-3g refuses to mount because of that bad sector :/ [22:46] Is that good enought for re-wording it jefinc [22:46] nunu, if you use the Windows Install disk, you can probably restore the boot sector [22:46] thomazz: yes that's much easier to work with [22:47] can you help me out [22:47] BONSOIR [22:47] mnaines, he tried that without success :/ [22:47] hey guys, got another question: why do my videos in totem seem to tear like vsync is off in a video game? [22:47] nunu: Did you recommend he switch to Linux? [22:47] yes :D [22:48] he said "if I can recover the data, I'll stickl to ubuntu from now on" [22:48] ^^ [22:48] nunu, which windows [22:48] xp [22:48] How would linux deal with the bad sector problem? [22:48] nunu: Use a separate hard drive to install Linux, then once it is installed, plug in the bad drive and he should be able to read the data on the drive [22:48] anyone know the difference between terminal server client and remote desktop viewer (Vinagre) [22:49] we bootet ubuntu from disk === crunchbang is now known as Guest832 [22:49] but ntfs-3g can't mount the partition [22:49] is there a way to force it or so? [22:49] nunu: I think there should be, but I do not know what that command would be === Root is now known as Guest95863 [22:49] nunu: in gnome go to places/computer and you should see any hds on the system [22:50] nunu, I didn't see the drive error bit, the live CDs show me my Windows 7 drives without doing anything special you should see the fat32 drive no problem I'd think [22:50] its a laptop :/ another HD is not really an option :/ === Guest95863 is now known as grturner [22:50] I need help with a little problem..... [22:50] nunu USB external HD [22:50] nunu: Does it have an ExpressCard slot? [22:50] cases are like $10 now.. throw and old drive in it [22:50] didn't quite get that cpjr72 my english sucks =) [22:50] can fsck run on ntfs ? [22:50] GTK... can't install on Ubuntu 8.04 [22:51] nunu: an external USB drive [22:51] CavalierPrime, the auto mounting doesn't work :/ [22:51] external USB drive what for? [22:51] navap: Interresting eh ;) / read the code [22:51] after dist upgrade i worry about Quanta's print preview which opens gimp instead of a lightweight gtk-print or kprinter dialog :-( [22:51] why should I install ubuntu when the live disk can't mount it? [22:52] my network doesn't work. the error message I get when using the command: "sudo /etc/init.d/networking restart" is the following: Can't allocate interface eth1lease { interface . Failed to bring up eth1 [22:52] Hey Hey... I need help.. === chaky_ is now known as chaky [22:52] nunu, I can run eSATA on my laptop using a Silicon Image eSATA ExpressCard adapter [22:52] Problems with GTK library [22:52] nunu possibly it wont automount due to the drive not being shut down correctly - [22:53] hi [22:53] !bot [22:53] Hi! I'm #ubuntu's favorite infobot, you can search my brain yourself at http://ubottu.com/factoids.cgi - Usage info: http://wiki.ubuntu.com/UbuntuBots [22:53] !tell user permissions [22:53] Error: I am only a bot, please don't think I'm intelligent :) [22:54] grr [22:54] que onda esto? [22:54] I'm confused now -.- ... I'm not sitting next to the laptop... so its hard do do such things, my friend has not really an idea what he's doing there... [22:54] para mi que es la tangente [22:54] he told me, that he tried to recover with his xp boot cd [22:55] but it all went wrong eeror 5 or so [22:55] all I wanna do is exec this in a shell: wget -qO - http://www.mysite.com/ipupdate.php?officeip=$officeip but i think what is happening is officeip is getting reset or something, cause its not working [22:55] one question, i updated to karmic yesterday. it seems like (at least) gtk+ based apps seem much snappier than before. even java/swt is usable now. what changed? [22:55] what does this mean: ondemand governor failed, too long transition latency of HW, fallback to performance governor ? [22:55] what permissions and where do i set for a user to be able to chmod other user's files? [22:55] FirstSgt: you're going to want to quote the url, otherwise the ? will cause problems [22:56] trism: oh, didn't think about the ? [22:56] shucks [22:56] ok, i try [22:56] my network doesn't work. the error message I get when using the command: "sudo /etc/init.d/networking restart" is the following: Can't allocate interface eth1lease { interface . Failed to bring up eth1 [22:57] Guys - turns out that if you run out of space on your harddrive that it prevents the menu files from being saved and preserved correctly... looks like i got a busy weekend moving my /home partition - CavalierPrime - thanks for your help... [22:58] I wish emachines was smart enough to include the model of my bios <_< [22:58] what permissions and where do i set for a user to be able to chmod other user's files? [22:58] trism: still doesn't appear to be running [22:58] i tried this: `wget -qO - "http://www.complimentsinternational.com/ipupdate.php?officeip=$(officeip)"` [22:59] Too bad i lose all my programs when i restore ubuntu :( [22:59] 61%... [23:00] FirstSgt: $(something) executes a command, you want ${officeip} [23:00] Hi, I need some help with my lvm setup. I've reinstall ubuntu and lost my lvm configuration. So I want to re-assemble my lvm to access the logical volume [23:00] how do i get out of a directory in terminal (i can remember in cmd but never terminal) [23:00] May any body assit me ? [23:00] trism: ok, kind of like php ) [23:00] ikonia, if no one here knows you might want to go to the ##linux channel [23:01] try cd .. [23:01] coz_: I went unnoticed in ##linux lol [23:01] no one helped me :p [23:01] tarzan, ask your same questino in #ubuntu+1 [23:01] PCTeacher012, it may be the time of day [23:01] Dream-Ubu: You can also try clear. [23:01] PCTeacher012, it is 6PM here in the eastern US [23:01] ZykoticK9, thanks [23:02] coz_: There is less than half of the people in ##linux then #ubuntu :p and like 4PM here in western us xD [23:02] PCTeacher012, i dont know where most of the people in ##linux hail from [23:02] me either lol [23:02] why should installing ubuntu help me mounting that ntfs partition, when the live disk can't mount it? can anyone tell me that? [23:02] didn't get that ^^ [23:02] PCTeacher012, they may be european hold on let me see if I can check [23:02] coz_: KK :p === jmrodri is now known as jmrodri-gone [23:02] nunu: That didn't make sense to me either. [23:02] nunu: you're right. thats a nonsensical answer [23:02] the_doctor: that just leaves me in the same directory doesnt take me out of it [23:03] Sorry [23:03] navap and maco: same here haha. It wont find /dev/sda1 on live CD. but boots from it without live cd haa [23:03] what do you mean by that / [23:03] Funny thing: I have a windows partition, but no windows -_- I NED TO FIND MY XP RESTORE CD <_< lol [23:03] the_doctor: dont be ^^ blame my colllege for teaching me cmd [23:04] PCTeacher012, cant find too much out ...a few are european many are US as far as I can see [23:04] im getting an xml file not found errorin cinelerra, can anyone help me? [23:04] what permissions and where do i set for a user to be able to chmod other user's files? [23:04] or get windows 7 ^_^ [23:04] but you understand what I'm trying to tell you? ... what the problem is? === kathryn_ is now known as Lithium_Rain [23:04] and coz_Yea, idk [23:04] Dream-Ubu: I have a bunch of cheat sheets. [23:04] 75% done ^_^ [23:04] zoli2k, which xml file is it asking for? [23:05] dumont: chmod 744 or chmod +4 [23:05] please someone help me [23:05] pepperjack, what do i need chmod for??????????? [23:05] my network doesn't work. the error message I get when using the command: "sudo /etc/init.d/networking restart" is the following: Can't allocate interface eth1lease { interface . Failed to bring up eth1 [23:05] !ask | thomazz [23:05] thomazz: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) === |Myxb| is now known as Myxb [23:05] dumont: oh wait didnt read your q well [23:05] pepperjack, when i need to allow 1 user the ability to chmod another file [23:05] by another user [23:05] the_doctor: city and guilds level 2 - ict system support, and they've not covering ANYTHING Linux, wheres the sense?! [23:05] ubootu, I asked the question like 10 times.. [23:06] thomazz: ubottu is a computer program not a person [23:06] the_doctor: i have to learn linux in my own time... [23:06] pepperjack, i have www-data and i need to give it access and ability to chmod 777 onto files created by userA [23:06] dumont: Sometimes you can just right click on the file and browse to the premissions tab and change it there., [23:06] thomazz: When you installed ubuntu, maybe your ethernet driver was not installed [23:06] NOT IN GRAPHICAL! [23:06] thomazz, many of us have just joined not long ago so we may not have seen your post [23:06] G'day all - does anyone know how to set the title of a gnome-terminal from a script running the the gnome-terminal? [23:06] Dream-Ubu: I have been trying for 7 years and 202 distrobutions. [23:07] everything worked well in 5 months.. I think it's related to me switching on wireless network [23:07] ethernet driver, yeah i kike those drivers, they drive fast [23:07] guys i have a big problem [23:07] did I miss a solution to my problem? navap maco PCTeacher012? [23:07] The_Doctor: ubuntu and DSL been playing with ubuntu since 8.04 [23:07] pacifica, does this script title the terminal something different? [23:07] i don't need specific file manipulation i need to grant user www-data the ability to change userA's files, such as use chmod on userA's files [23:07] nunu: What was the question again? [23:07] coz_: I can't find a way to change the title at all [23:07] thomazz: Just might be, but im not sure. [23:08] The_Doctor: DSL just didnt do it for me, not pleasing...so...i went with the shiney debain [23:08] all linux distros are reading my hard disc as empty even ubuntu. and i have windows installed on it which i can boot fine and i have a store partition which works fine too, pls someone help me i wish to get linux soon back to my pc !!! [23:08] pacifica, but is this script changing the title? [23:08] it is set to user@host:~$ [23:08] sannabis cativa is the name of my cat [23:08] PCTeacher012: okey.. I didn't change anything else network related.. [23:08] which script? [23:08] mounting a ntfs partition which has a defect boot sector or something like that, out of the running live disk ubuntu [23:08] hello. i have a problem using VLC with v4l2 :( cant choose :v4l2-standard=8, video standard work is not predictable === JayC- is now known as JayC-_ === JayC-_ is now known as JayC- [23:08] pacifica, I thought you said you wanted to change the title of the terminal that the script ran in [23:08] dumont: here is a link to a chmod tutorial http://catcode.com/teachmod/ [23:08] PCTeacher012, mounting a ntfs partition which has a defect boot sector or something like that, out of the running live disk ubuntu [23:08] would it help if I paste my ifconfig and send you an URL [23:08] coz_: I would like to know how a script can change the title [23:08] pacifica, oh [23:09] pacifica, mm [23:09] all linux distros are reading my hard disc as empty even ubuntu. and i have windows installed on it which i can boot fine and i have a store partition which works fine too, pls someone help me i wish to get linux soon back to my pc !!! [23:09] pacifica, see "-t, --title=TITLE Set the terminal title" from "gnome-terminal --help-all". good luck. Eterm had that functionality back in the day as well. [23:09] crikey I can't get mplayer to work! [23:09] why not? [23:09] nunu: If it is a file system error on ntfs partitions part, you must go into windows (the only ntfs operating system i know of) and run chkdsk [23:09] If two processes are doing " cmd >> logfile", will each write append to the end, or will their output overlap? [23:09] pacifica, if it is chaning the title it is likely to be listed in the script if you want the script to change the title you will have to enter that I cant help you with that [23:09] coz_: if you look at the preferences in gnome-terminal, you can run a command in the terminal to change the title dynamically [23:09] Dar [23:09] it gets as far as saying "mpeg-ps file format detected" and hangs [23:09] unfortunately they don't say which command! [23:09] did you put windows on after linux? You said you wanted to get it back. [23:10] Gotta restart to finsish ubuntu restore, brb [23:10] http://ubuntuforums.org/archive/index.php/t-362782.html [23:10] PCTeacher012, and there is the problem, the windows system wont boot, and the xp boot cd wont work either [23:10] The_Doctor: i had this computer for 2 years and iv been playing around with oses for the whole 2 years so i had windows and linux and mac osx and freebsd and more many times on this pc [23:10] Will HP officejet 5600 work with Ubuntu? === Swish[\] is now known as Swish [23:10] ZykotickK9: if I do gnome-terminal --title="whatever" ... it still does not display that title [23:11] DarkSmoke: Is the linux the last install? [23:11] pacifica, try looking here http://library.gnome.org/users/gnome-terminal/stable/ [23:11] pkkm: linuxprinting.org usually gives you a good idea [23:11] !hardware | pkkm [23:11] pkkm: For lists of supported hardware on Ubuntu see https://wiki.ubuntu.com/HardwareSupport - To help debugging and improving hardware detection, see https://wiki.ubuntu.com/DebuggingHardwareDetection [23:11] неподскажите что надо установить или настроить чтобы нормально работали Яваскрипты? [23:11] pacifica, you're right! i tried and failed ??? [23:11] !ru | yasia [23:11] yasia: Пожалуйста посетите #ubuntu-ru для получения помощи на русском языке / Pozhalujsta posetite #ubuntu-ru dlya polucheniya pomoshi na russkom yazyke [23:12] The_Doctor: its not installed, cause i cant installing, all distribution installers read my hdd as empty :| [23:12] pepperjack, thanks [23:12] coz_: I've read that doc [23:12] it says: [23:12] Use this drop-down list to specify how to handle dynamically-set titles, that is, terminal titles set by commands that run in the terminal. [23:12] the thing is : what commands?? [23:12] !printers | pkkm will be of more help [23:12] pkkm will be of more help: Printing in Ubuntu is done with cups. See https://help.ubuntu.com/community/Printers - https://wiki.ubuntu.com/HardwareSupportComponentsPrinters - http://linuxprinting.org - Printer sharing: https://wiki.ubuntu.com/NetworkPrintingFromWindows [23:12] would someone using 9.04 pastebin the sources list [23:12] ubuntu has gone slow, since i just updated everything... [23:13] By mistake I deleted all the applications and system->settings in the menu panel in gnome. I already tried to reset the panel which brought back the applications but not the "system->settings". How bring back the settings? [23:13] how do I make Windows the default in GRUB2? [23:13] Can anyone name the program to do the Windows Migration stuff again after Mint has already been installed? I really don't want to re-run the installer and spend another hour downloading updates just to fix everything being imported in to a single account. [23:13] wow [23:13] busy morning === gbNiNjA is now known as JayC- === Commie_Cary is now known as Lenin_CAt === Lenin_CAt is now known as Lenin_Cat [23:13] DarkSmoke: Have you tried to install on the windows os using WUBI. It makes linux a file on your Microsoft OS. [23:13] Xptical: sudo gedit /boot/grub/menu.lst Copy the section that has the windows stuff to above the ### line above the linux kernels. Do not insert the 'other operating systems' section. [23:14] yo yo any NIS gurus about? [23:14] yes i know The_Doctor but i dont wish for that [23:14] not GRUB...GRUB2 [23:14] i've got a problem. Java-scripts don't work in mozilla and Konqueror=\ What i need repair or install? [23:14] sorry for my english pl [23:14] s [23:14] * [23:14] Xptical: grub2? Isn't that not supported by ubuntu until 9.10 ? [23:14] which repository is libdvdcss in? [23:14] restricted? [23:14] using the beta [23:14] !next [23:14] Sorry, I don't know anything about next [23:15] pacifica, i just installed eterm and it works there, "Eterm -n NameYouWant"... gnome-terminal I don't know about sorry. FYI it's not a good idea to be writing scripts that reply on a windows name for the gui - what if it's running in a shell? Good luck. [23:15] Xptical: try joining #ubuntu-next (IIRC) [23:15] yo yo any NIS gurus about? [23:15] no wrong chan [23:15] hedkandi: Try adding the medibuntu repro. [23:15] Xptical: | Karmic Beta (9.10) Support in #ubuntu+1 [23:15] is there a hot key to lock the screen in ubuntu? [23:15] thanks [23:16] coz_ / ZykotickK9: I think it might change the title but then change it back [23:16] The_Doctor: you mean repository? [23:16] so effectively it doesn't change it.... [23:16] hedkandi: Yes [23:16] but technically it might have.... [23:16] hedkandi: That has all the multimedia codecs. [23:16] The_Doctor: what's the package name? [23:16] pacifica, you need a !who and try and keep all you repsonses on 1 line - it's MUCH easier for everyone to follow stuff [23:17] jesus ... windows sucks ... am I glad using linux -.- [23:17] ZykotickK9: I've got many tails on many similar logs.... very useful to havea meaningful title.... [23:17] hey when ive been using envyng and using the package it installs, my box gets locked on reboot [23:17] hedkandi: Its not a package, its a repository. Do a google search on how add it. [23:17] pacifica, oh I will use them for menu shortcuts and odds and ends [23:17] ZykotickK9: its one line on my big display :-) ...make the window bigger... [23:18] ive tried and tried to figure this out. when i use this external drive, i want it read-write to all users instead of the user logged in at the keyboard. ive tried writing policies, everything i can think of...i give up. anybody know how? lol [23:18] The_Doctor: ooh yes you are right [23:18] pacifica, use TAB completion for nicks - mines still off ..ckK9 is wrong [23:19] ZykoticK9, thanks :-) [23:19] anyone know of a good 16 bit x86 disasembler? can i somehow use gcc or gas to do that? [23:19] its using the nvidia binary drivers, or was, the only way to then get back into a usable x is to goto single user mode and change the driver module from nvidia to nv [23:19] The_Doctor: there's a package in ubuntu called libdvdread4 [23:20] which claims to contain dvd descrambling [23:20] but it seems to be screwy [23:20] hedkandi: no dvdcsss comes in a separate lib aviable in medibuntu [23:20] anyone know what is the best program to clone your hdd to other hdd? [23:20] !medibuntu [23:20] medibuntu is a repository of packages that cannot be included into the Ubuntu distribution for legal reasons - See http://www.medibuntu.org [23:20] hedkandi: but I am surprised that when you tried to play the media you are having trouble with, you were not presented with a choice to install the codecs. [23:20] MrSchmo: clonezilla ? [23:21] ZykoticK9, installed eterm .. but no eterm command? [23:21] erusul, is that simple to do? it has a gui [23:21] hi [23:21] whats the best ragnar benson book [23:21] MrSchmo: dunno never used it. only know about it [23:22] !ot | dexter_ [23:22] dexter_: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics. Thanks! [23:22] pacifica, no thank you for fixing the nic thing - now it highlights :) - Linux is case senitive so it's "Eterm" [23:22] ubuntu is linux right? [23:22] dexter_, yes [23:22] ZykoticK9, right... let me try that .... :-) [23:22] MrSchmo you could probably try Norton's Ghost with Windows and try to see if the Ubuntu will boot up as an experiment. [23:22] and you all use ubuntu right [23:23] why not put the codecs into ubuntu restricted or multiverse then? [23:23] dexter_, did you have an actual support question [23:23] ZykoticK9, that works like I'd expect it to work.... guess no-one uses gnome-terminal's titles on Ubuntu?? === chaky_ is now known as chaky [23:23] dexter_, ask same question in #ubuntu-offtopic [23:23] hedkandi: they should be there. What was your problem/ [23:23] thx for the help anyway @ll... glad we all use linux =) gn8 [23:23] pacifica, if you ask me it's a bug... [23:23] Help ; howto Windows Migration (assistant?) after install? [23:23] curly_q i need something that is free. norton ghost need to be purchased to use right? [23:24] hedkandi: Why were you asking for the codec/ [23:24] Yes. [23:24] is the any macromedia flash for linux [23:24] how do you download a .deb file out of the apt repos without actually installing it? i.e. the redhat equiv is doing e.g. `yumdownloader firefox`, which places firefox-*.rpm in the current working directory. can this be done in ubuntu? [23:24] ZykoticK9, is it a bug? (now it is :-P) [23:24] !backup | MrSchmo [23:24] MrSchmo: There are many ways to back your system up. Here's a few: https://help.ubuntu.com/community/BackupYourSystem , https://help.ubuntu.com/community/DuplicityBackupHowto , https://wiki.ubuntu.com/HomeUserBackup , https://help.ubuntu.com/community/MondoMindi - See also !sbackup and !cloning [23:24] yes if you are using ubtutu wich is linux then you must be parinoid out of you minds so therefore you should have every copy of the ranger beson collection under you bed near your AK therefore you should be able to tell me what is the bet one [23:24] ok [23:24] Hello everyone. I'm having an issue with 32472808 [23:24] !ot | dexter_ [23:24] dexter_: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics. Thanks! [23:24] dexter_, please take chat to #ubuntu-offtopic [23:24] lol... sorry about that [23:25] pacifica, actually after reading my first google hit i doubt it is. something to do with dynamic naming in gnome-terminal. [23:25] pradeep: sudo apt-get install flashplugin-nonfree [23:25] there doesn't seem to be an i686 version of these media codecs! [23:25] pepperjack, thanks. definitely take a look at it [23:25] which I think is a bit serious [23:25] because i686 is much better than i386 [23:25] ? [23:25] There are other software such as Ultra ISO and more that makes ISO files and Ghosts Hard Drives. [23:25] hedkandi: yes there is. What made you think you needed them. What didn't work? [23:25] ZykoticK9, its probably a "feature" ... like I said I think it does change it but then something else changes it back! [23:25] Does anyone have any ideas of a way to get several package files onto a computer that can't get internet? (Specifically ubuntu-restricted-extras, compizconfig-settings-manager, emerald, screenlets, vlc) [23:25] not plugin trism [23:26] By mistake I deleted all the applications and system->settings in the menu panel in gnome. I already tried to reset the panel which brought back the applications but not the "system->settings". How bring back the settings? [23:26] how do I choose between the 686 and 386 versions then? [23:26] im trying to run a .run file and I checked "allow executing file as a program" but I have to run it as a super user "sudo" can I do both? [23:26] ZykoticK9, guess I need to find a way to kill the "something else" [23:26] A recent patch seems to have broken my sound... Has this been a compliant recently? [23:26] or do I have to run it from terminal if Im gonna run it as a super user? [23:26] There is also Magic ISO [23:26] RyNo: You could also do gksudo nautillus and then navigate to it [23:27] not flash player bt the macromedia [23:27] pradeep: there are a few applications that will generate swf files, but they weren't great last time I checked (which was a while ago) [23:27] hedkandi: i386 and i686 are two ways of saying 32 bits as oposed to amd64 or x86_64 that are two forms of saying 64 bits [23:27] I'm having an issue with latest update of Karmic... I'm wondering if that's a common issue. Whenever it asks me for authentication to install an update or remove a package, it locks on that window, after I enter my root password and press authenticate. Sometimes closing this dialog makes it work normally, sometimes it just freezes. [23:27] Alex____, you can download the debs then get them on a media that you can get into the computer without internet [23:27] !karmic | codnik [23:27] codnik: Karmic Koala is the codename for Ubuntu 9.10, due October 29th, 2009 - Karmic is BETA and MAY break - Discussion and support in #ubuntu+1 [23:27] im near clueless when it come to linux terminal commands [23:27] ok [23:27] Data Recovery software can create a mirror image of a hard drive. [23:27] Alex____, fyi i have tried to get ubuntu onto computers without internet on a number of occasions - i've learned a ton about ubuntu packaging that has helped in other areas - but i have yet to actually accomplish it. apt-on-cd is something to look into for sure. Best of luck :) [23:27] the difference is non-trivial actually [23:27] Alex____, the only "problem" is you need to make sure you include all the dependencies... [23:27] im trying to run the ATI driver for catalyst 9.9 for my HD 4350 [23:28] cant seem to run it in terminal for some reason [23:28] pradeep: the best ones were mostly just for programming (adobe flex has a linux version and haxe will generate swfs) [23:28] kimg yong il? [23:28] pacifica: I figured that much, my problem is trying to GET the package files to be able to transfer them... Someone suggested Apt-on-CD but it only got things from the update manager... none of my personal downloaded packaged [23:28] RyNo: why not use System>Admin>Hardware drivers ? [23:28] alteregoa, ?? [23:28] whats the command to install gstreamer-dev, becuase i type that and well, it doesnt install [23:28] ah wrong channel [23:28] Alex____, the site http://packages.ubuntu.com/ lists the dependencies for each package [23:28] Greets to The_Doctor. I haven [23:28] t [23:28] seen you in a while. [23:28] hi all. almost all of my windows (even the root window/desktop http://codebad.com/x-corruption.png) have become corrupted! by resizing a window i can get it to redraw, but is there an easy way to get them all to redraw? [23:29] pacifica: But where can I go to actually get the package files to transfer them? [23:29] ok, me haz problemz: I have Eee 1000 and external monitor and ubuntu 9.04 netbook remix. The fail is: when I use external monitor I can't use pivoting, (unless I turn the resolution into acceptable to my inbuild lcd i.e. 800x600), although I have disabled inbuilt monitor!! [23:29] hdon: intel drivers? [23:29] /srv/irclogs.ubuntu.com/2007/08/27/#ubuntu.txt [23:29] i see the FGLRX driver in hardware drivers but it says "activated but not currently in use" [23:29] Alex____, for instance take this one: [23:29] Alex____, http://cz.archive.ubuntu.com/ubuntu/pool/main/a/adduser/adduser_3.110ubuntu5_all.deb [23:29] Ademan: no, nvidia [23:29] Alex____, all the debs on a system are stored in /var/cache/apt/archives it's the package database update that has always given me troubles "sudo apt-get update" is not so simple to move to a computer without internet [23:29] no halbar espanol [23:29] Alex____, use "wget" on the Linux commandline to get the deb [23:29] is there a way to make a shortcut that kills a window i click on? [23:30] Alex____, or use a web browser to download it. [23:30] hdon: :-/ well that's definitely a driver or xorg issue... [23:30] de uno beh flugo [23:30] who is responsible for x-serv bugs? [23:30] infid look into wmctrl [23:30] infid: there is apanel applet to do that. right click on the panel and choose add to panel [23:30] Ademan: i dont' disagree at all. i just want a temporary fix to get my windows to redraw, especially the root window [23:30] no se unma sedar [23:30] infid: search for it in the list [23:30] infid: there's an applet, you can right click on your panel and hit add to panel then pick "Force Quit" [23:30] Help ; howto Windows Migration (assistant?) after install? [23:30] RainyLithuanian, you need first before you ask any question here is to explain which MODEL of the Monitor and MAKE it is in your question. [23:31] dexter_, please stop that; random chat in #ubuntu-offtopic [23:31] ok, the make is SAMSUNG F2080 [23:31] can anyone say what /etc/network/interfaces is please? [23:31] I don't understand a word of the doco [23:31] pacifica: But how can I find out the web address for the specific package file? all I know is it's name, eg. ubuntu-restricted-extras [23:31] hedkandi: a file to configure the network interfaces of the machine [23:31] hdon, i haven't been following you problem. but does starting xkill and clicking on the application menu launch fit your bill? [23:31] hdon: i'm not sure how to coax the root window into redrawing, but if you're using metacity you can write a devilspie script to resize every window and resize them back, needn't be too much work [23:31] hedkandi: it's a configuration file that defines networking interface [23:32] Then Rainy look it up on Google and see if it is compatible with Ubuntu and whether the manufacturer made drivers for it in your case. === phanki is now known as hipsauerkraut [23:32] hedkandi: for a desktop managing them via network manager is preferable [23:32] erUSUL: so what does this file tell them to do then? [23:33] i can't play my music on amorak 2.0 when i click on it, can anyone help? [23:33] ZykoticK9: And I'm not sure if I messed something up... but /var/cache/apt/archives doesn't have many of the debs I've gotten with apt-get install [23:33] hi, i am trying to access my house's wireless network from my laptop which has jaunty; i tried going to the 'Network' link in the Places menu, the only thing i see there is "Windows Network" and when i click there i see an error message saying : Unable to mount location ; Failed to receive share List from Server : what am i doing wrong ??? === Madcamperx is now known as Madcmaper [23:33] hedkandi: they configure ip netmask gateaways even routes. sssid in the case of wifi [23:33] thanks erUSUL and Ademan === Madcmaper is now known as Madcamper [23:33] I would suggest Rainy to you is to disconnect the monitor not while the computer is on but while off and go back to your computer and set the resolution to the lowest resolution. Then try the monitor. [23:33] !samba [23:33] Samba is the way to cooperate with Windows environments. Links with more info: https://wiki.ubuntu.com/MountWindowsSharesPermanently and https://help.ubuntu.com/9.04/serverguide/C/windows-networking.html - Samba can be administered via the web with SWAT. [23:33] hi everyone. Have a Gateway t-series laptop that won't install Ubuntu 9.04 [23:34] Alex____, theoretically it should have virtually all of them? don't know why they wouldn't be there... mystery. [23:34] kraito_: try selecting a different output system, gstreamer, alsa or pulseaudio [23:34] hedkandi: and a long etc. if you are interested there is plenty of info in the web [23:34] By mistake I deleted all the applications and system->settings in the menu panel in gnome. I already tried to reset the panel which brought back the applications but not the "system->settings". How bring back the settings? [23:34] just hanges. [23:34] is there a reason 'ctrl-alt-l' is so slow to lock your screen? [23:34] hi! does someone has used an anviz ao280 fingerprint device? [23:34] my FGLRX driver is showing "activated but not currently in use" can someoen help me with this? [23:34] thanks joebodo [23:34] erUSUL: ie where to send packets [23:35] Does the kernel automatically attempt to use any / all available network interfaces? [23:35] ZykoticK9, found the problem.... even though /etc/bash.bashrc section is commented out [23:35] ZykoticK9, its still in ~/.bashrc [23:35] tipi: right click on the panel and choose add to panel. in the list of applets there is the one that draws the menus (there are two versions one with only one button and the default Apps Places System menu ) [23:35] ZykoticK9, so after commenting out that bit, things like xtermset -T "title" work.... [23:35] ZykoticK9: what's jaunty's default key combo for xkill? [23:35] hi! [23:35] ZykoticK9, thanks for helping to think about this :-) [23:35] ZykoticK9: That's why apt-on-cd isn't working for me... ubuntu-restricted-extras, screenlets, emerald and compizconfig-settings-manager aren't in the folder [23:36] Ademan: is there a metacity scripting language? or metacity interfaces for another scripting lang? [23:36] pacifica, "# If this is an xterm set the title to user@host:dir" nice catch :) [23:36] hedkandi: the kernel only loads the drivers for the nic (or modem or whatever) and present userspace with the interface to configure (ethx wlanx pppx sit pan br etc) [23:36] system powers up. Ubuntu loads. I pick my language "English" then select "Try without any changes to your computer" and it just hangs. [23:36] Tipi if you want to fix that make sure that when you set up a USER ACCOUNT in ROOT, backup all of your important data from ROOT and then go back to root and delete the account and create the same account if you want those drivers or things you did. [23:37] erUSUL__ already tried that, but if I add a new menu to the panel, no system-> settings [23:37] hdon, xkill has a hotkey? news to me. [23:37] :( [23:37] * ale_ Hi [23:38] so does anyone know about implimenting opengl using an nvidia geforce 5200? [23:38] hello. I suspect the spindown time for my hdd is too low. how can I check the current value? [23:38] tipi: works here... [23:38] !resetpanel | tipi [23:38] tipi: To reset the panel to defaults, type this in a !terminal: « gconftool --recursive-unset /apps/panel && killall gnome-panel » [23:38] is there a way i can make a copy of my ubuntu that will have all the progs that i have [23:39] Alex____, just browse http://packages.ubuntu.com [23:39] violet523: System>Admin>hardware drivers [23:39] ubottu already tried that, no change [23:39] Error: I am only a bot, please don't think I'm intelligent :) [23:39] No HD activity, CD in drive does not spin. [23:39] preecher: use partimage or clonezilla ? to backup the hard disk [23:39] can someone please tell me how to change ownership on an external HD? I've tried chown, but it didn't take effect. [23:39] !clone | preecher [23:39] preecher: To replicate your packages selection on another machine (or restore it if re-installing), you can type « aptitude --display-format '%p' search '?installed!?automatic' > ~/my-packages », move the file "my-packages" to the other machine, and there type « sudo xargs aptitude --schedule-only install < my-packages ; sudo aptitude install » - See also !automate [23:39] i have some probleme with the internet connexion sharing through my windows xp service pack 3 os to ubuntu server 9.04 [23:39] i can ping all os but i can't ping google on ubuntu server [23:40] Alex____, if you search there for ubuntu-restricted-extras [23:40] erUSUL but works usually but not when they are deleted I guess [23:40] albertong: what error do you get ? [23:40] thanks [23:40] Alex____, you'll get http://packages.ubuntu.com/search?keywords=ubuntu-restricted-extras&searchon=names&suite=jaunty§ion=all [23:40] albertong: from ping [23:40] Alex____, i see your problem! i don't have those deb file either. still looking though. [23:40] Alex____, then click on "jaunty" (for instance) [23:40] then at the bottom of the page there's a download section [23:41] erUSUL: he only problem is when i use the NVIDIA accelerated graphics drivers (173) X won't load up and i can't even get to a virtual terminal [23:41] should I pick OEM install? [23:41] click on there, it will take you to a list of mirrors [23:41] !envyng | violet523 [23:41] violet523: EnvyNG is a program to install newer version of nVidia or ATi drivers, it can be found in !Universe as "envyng-gtk" (for Gtk/Gnome) or "envyng-qt" (for Qt/KDE). It is NOT a supported method to install video drivers; please only use it if standard methods fail and at your own risk - See also !BinaryDriver [23:41] pacifica: I see. I thought you were somehow trying to do like sudo wget ubuntu-restricted-extras and I wasn't following lol [23:41] Alex____, then right click one of the mirrors and choose Copy Link Location [23:41] Alex____, then paste that after "wget" [23:41] Hi guys [23:42] erUSUL: yeah that was the program i first tried [23:42] Alex____, this needs to be like this since you might be downloading for a completely different version of Ubuntu [23:43] Does anyone here play Savage 2? [23:43] pacifica: I just hadn't noticed that you could download the debs off packages.ubuntu.com [23:43] Alex____, there you go :-) [23:43] I'm having a problem with "Terminator" terminal emu. It won't read the config file at /home/USERNAME/.config/terminator/config. Any hints? [23:43] :) [23:43] erUSUL : unknow host www.google.com === exe_ is now known as Guest81284 === weblap is now known as colosseum [23:44] albertong: and if you use a numeric ip ? ping 209.85.229.103 [23:44] Trying to run "make && sudo make install" but I get an: make: *** No specified target and no makefil found. Stop. [23:44] albertong: maybe it is just that you do not have nameservers defined [23:44] how do you disable the thing that shows bubbles of your pidgin messages? i thought it was indicator-applet but i removed it and it's still happening [23:45] I'm having a problem with "Terminator" terminal emu. It won't read the config file at /home/USERNAME/.config/terminator/config. Any hints? [23:45] erUSUL: same error from ping [23:45] what is the best channel for chatting on motherboards? [23:46] Hi swoody! [23:46] if gdm is hanging because of an incorrect module, what key combo will force quit it? [23:46] albertong: same error? unknown host ? it is not no route to host? or something else ? [23:46] mistergibson1: ##hardware ? [23:46] having a problem with sbackup, hope someone can help. When I set the scheduled time, it won't let me set the hour higher than 13. If I manually enter 19, it resets back to 13. Anyone know how to fix this? [23:47] When installing ubuntu, how long does it take before you see any progress indicator? [23:47] Anyone gotten Wink to work with Ubuntu? I have symlinked the required libraries, but the install still gripes about it [23:47] hey guys.. is there a way to share packages across a network? [23:47] Is there a good application I can use to organize a large number of videos? Like how rhythmbox is for audio files. is there a video library application? [23:49] erUSUL:not i have configured my gateway properly! [23:49] hassanakevazir: i think Miro would do that [23:49] hassanakevazir: banshee supports video afaics (but i have not used it much for that) [23:49] Hi all. Is there any1 who can helkp for me about apach2 and joomle?:) [23:49] albertong: :) ok [23:49] and i can see my gateway by type " route -n " [23:49] hassanakevazir: you can use miro. It does a prity good job, also downloads internet videos from youtube I think. http://www.getmiro.com/ [23:49] hello [23:49] gasmask, do you remember did you have to create the directory terminator and then create the config inside the directory? cause it certainly not their by default on my system. still testing though.. [23:50] winterswift: haha I was typing it as you did too! too good! [23:50] gasmask: :D nice [23:50] Bonjour [23:50] gasmask, could you also verify that "echo $XDG_CONFIG_HOME" doesn't come up with anything on your system either? [23:50] ZykoticK9: Yeah, I did have to create it [23:50] what's a good chatroom to talk about tcp/ip [23:51] ZykoticK9: ok, one sec [23:51] hedkandi: ##networking i assume? [23:51] http://itpro.no/art/14658.html [23:51] thx! === Nightw0lf is now known as Nightwolf [23:51] ZykoticK9: yeah, nothing [23:51] hedkandi: #tcpip? [23:52] #tcpip [23:52] winterswift, erUSUL, gasmask , I can't install Miro thought, there is a conflict with in it with a 3rd party rep I use for VDPAU support. I guess I'll take a look at banshee, forgot to search in sourceforge too , thanks [23:54] hassanakevazir: theres also Mplayer, not sure about libraries though [23:54] Hello everyone! I need help setting up a network printer. It is connected to my computer (a desktop) which is directly connected to my modem. I want the printer to be available over the wireless network. How do i accomplish that? [23:54] hassanakevazir: hmmm, I'll see there is a .deb for it... [23:54] gasmask, re- XDG... good. ok -- i got terminator to read my config file..?..?.. [23:54] it the printer connected with ethernet cable using a print server or do you want to share it via usb? or what [23:55] The printer is connected to my USB. My computer is connected to my modem via ethernet. [23:55] hassanakevazir: here is a deb from getdebs: http://www.getdeb.net/app/Miro [23:55] ZykoticK9: did you do anything special? [23:55] have u got the cups drivers installed [23:56] ae86-drifter: Yes, i do. The printer is Brother MFC-210C and i can print from my computer right now [23:56] The operating systems of the wireless computers are vista [23:56] lucky [23:56] gasmask, my entire config file is just "[keybindings] / full_screen = F12" but i swithed it from F11 and it accepted the change fine. are you sure it's in ~/.config/terminator/ and called config? [23:56] i do technical support for brother printers [23:56] fail, I believe the problem lies in some bug [23:57] not in under-support [23:57] join c++ === funkyHat_ is now known as funkyHat [23:57] are you sharing to other linux machines? [23:57] ups [23:57] ae86-drifter: No, it will be to windows vista machines [23:57] how do i register my nickname [23:57] you need to configure your samba server then [23:57] !register > invitingdopeman [23:57] invitingdopeman, please see my private message [23:57] ae86-drifter: How will i do that? [23:57] ZykoticK9: "pwd /home/john/.config/terminator " "ls config" [23:58] cody: create a share for the printer in system > Administration > Samba Config, make sure samba is installed [23:58] gasmask, also look at what "terminator -d" gives you for output - see if anything jumps out about the config file and an error or missing type stuff [23:58] ae86-drifter: There is no selection called samba config. The command would be sudo apt-get install samba correct? [23:59] cody: exactly [23:59] How do I unmount my cd drive located at /media/cdrom0 as root [23:59] cody: sudo apt-get install system-samba-config [23:59] ae86-drifter: Okay, installing now [23:59] m0r0n: sudo umount /media/cdrom0 [23:59] m0r0n: sudo umount /media/cdrom0