| Turtle_ | Hi, it seems that I have found a bug in the kernel related to my Ralink RT61PCI wifi card. Here are some logs http://paste.ubuntu.com/305551/ and kernel logs http://paste.ubuntu.com/305556/. I'm also filling a bug report as we speak :( | 02:55 |
|---|---|---|
| Appiah | I upgraded to Karmic and my network support is gone, both wlan and cable. I tried starting from a LiveCD and same problem there. Tried using the previous kernel and networking is fine there. | 07:25 |
| Appiah | Should I file a bug report? | 07:25 |
| Appiah | or am I doing something wrong | 07:25 |
| Appiah | https://bugs.launchpad.net/ubuntu/+source/linux/+bug/418933 found a bug report and a solution that works | 08:19 |
| ubot3` | Malone bug 418933 in linux "no internet connection (wifi+ethernet doesn't work)" [Low,Incomplete] | 08:19 |
| * nigel_c wonders how importance gets decided :/ | 08:23 | |
| Appiah | well there's alot to do! :) | 08:24 |
| nigel_c | Yeah, but networking simply not working is a bit of a show stopper for those affected :) | 08:26 |
| ^arky^ | Hi, Anyone seen these ALSA underrun and wake errors http://pastebin.ubuntu.com/304936/ | 08:41 |
| alexis_ | hi ! why in the karmic repositories, the are not linux-restricted package (for 2.6.31) ?? | 14:14 |
| alexis_ | why using DVB is so hard with the karmic's kernel. i have 2 usb dvb card supposed to work in linux. but its seem impossible to make it work. Artec T1 and another: terratec cinergy t usb xxs .... | 14:50 |
| alexis_ | 3 hours to try to make it work without any result... | 14:51 |
| alexis_ | If it is not a kernel problem, its a ubuntu bug... | 14:51 |
| ghostcube | guys since the update to karmic the uvc driver doesnt show any picture for my cam | 15:46 |
| ghostcube | cam gets detected but no output | 15:46 |
| ghostcube | i tried so far all webcam tools but same result | 15:47 |
| alexis_ | maybe cause linux-restricted is not in the depositories for the karmics kernel? | 16:07 |
| alexis_ | (i have also some difficulties with some drivers | 16:07 |
| alexis_ | specially for dvb hardware that are suppoed to work under linux since 2.6.18..... | 16:07 |
| alexis_ | :( | 16:07 |
| dtchen | alexis_: linux-restricted* went away for 9.10. What do you need it for?= | 16:09 |
| dtchen | alexis_: i.e., you should be using DKMSized versions if it all possible | 16:09 |
| dtchen | ghostcube: please file a bug: ubuntu-bug linux | 16:09 |
| alexis_ | i'm not developper, i just tried to make workin my harware. So i try differtn way, and in some howto, linux-restrictd- is needed.. | 16:10 |
| alexis_ | it seem that my probleme is linked to new kernel | 16:12 |
| dtchen | alexis_: again, linux-restricted* is gone. Please use the appropriate DKMSized packages. | 16:12 |
| alexis_ | (all was working fine in 2.6.24 | 16:12 |
| alexis_ | ok | 16:12 |
| alexis_ | but what do you mean about DKMSized packages? | 16:13 |
| alexis_ | for example, i just want to make work that | 16:15 |
| alexis_ | http://linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_XXS | 16:15 |
| alexis_ | dmk: i suppose that it mean that i just need to have te good module for my hardwaren and, this module will be loaded? | 16:18 |
| alexis_ | but with a sudo modprobe dvb-usb-dib0700 , nothing special happens | 16:18 |
| alexis_ | i have just, after: alexis@brocoli:~/v4l-dvb$ dmesg | grep -i dvb | 16:19 |
| alexis_ | [ 4459.067798] usbcore: registered new interface driver dvb_usb_dib0700 | 16:19 |
| alexis_ | but nothing workin more, and lsusb give me a geneic outbut without specify the model's name... | 16:20 |
| alexis_ | lsusb: Bus 001 Device 016: ID 0ccd:00ab TerraTec Electronic GmbH | 16:20 |
| ghostcube | dtchen: done https://bugs.launchpad.net/ubuntu/+source/linux/+bug/466935 | 16:21 |
| ubot3` | Malone bug 466935 in linux "No Video Output in Karmic with ID 046d:09a1 Logitech, Inc. QuickCam Communicate MP/S5500" [Undecided,New] | 16:21 |
| dtchen | alexis_: does it require firmware? Do you have linux-firmware installed? | 16:23 |
| alexis_ | yes it require, yes it is installed | 16:24 |
| dtchen | alexis_: and are you positive you don't need to pass additional parameters at insmod time? | 16:25 |
| alexis_ | i dont know, the module is supposed to be loaded automattically, no? | 16:26 |
| alexis_ | i tried too to compile v4l-dvb drivers, but i got some error with make... | 16:27 |
| alexis_ | http://paste.ubuntu.com/305889/ | 16:29 |
| alexis_ | (after reboot and reboot) dmesg: http://paste.ubuntu.com/305932/ | 16:30 |
| dtchen | please use #ubuntu for support | 16:30 |
| alexis_ | i yet tried :) | 16:31 |
| alexis_ | an other kernel question so. it is also about another dvb-usb hardware. In hardy 2.6.24, workin right just adding dvb-usb-dibusb-an2235-01.fw | 16:32 |
| alexis_ | but in jaunty and karmic now, i see in /boot/config-2.6.31-14-generic: | 16:33 |
| alexis_ | CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set | 16:33 |
| alexis_ | (line 3011) | 16:34 |
| alexis_ | and it is needed to use this other dvb-usb harware, Artec T1 | 16:34 |
| alexis_ | why is "not set" and no "y" or "m" ? | 16:35 |
| alexis_ | "Support faulty USB IDs" option is enabled. was enabled in hardy ..... | 16:38 |
| dtchen | can't tell offhand if it was just disabled inadvertently | 16:47 |
| dtchen | doesn't seem to depend on anything marked experimental or broken | 16:47 |
| alexis_ | sorry a patch yet exist for this point: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/448908 | 16:50 |
| ubot3` | Malone bug 448908 in linux ""Artec T1 AN2235 DVB USB" device is no more detected" [Medium,Incomplete] | 16:50 |
| alexis_ | i just saw that right now | 16:50 |
| alexis_ | :) | 16:50 |
| amgarchIn9 | is there any experience if linuc-crashdump helps to trace complete locks in graphical logins? | 17:51 |
| amgarchIn9 | How much memory does it take away with this cmdline option?: crashkernel=384M-2G:64M,2G-:128M. Is this memory reserved for crashdump during normal operation? | 17:54 |
| tormod | amgarchIn9, intel GPU? | 17:56 |
| amgarchIn9 | tormod: yes, why? It is 9.10 already, not 9.04. The GPU is not any of the recent ones: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03). I also guess a wireless stack may be involved in a crash. | 18:01 |
| tormod | amgarchIn9, what has 9.04/9.10 to do with it? you mean it is not caused by the GPU? try booting with "nomodeset" or use the vesa driver | 18:03 |
| tormod | amgarchIn9, are you sure the system is locked and just not the screen/console? | 18:04 |
| amgarchIn9 | tormod: i meant the sorrow state of intel graphics in 9.04. The locks are occasional but seem to correlate with graphic layer activitiy and high wifi traffic. Cups-Lock/Num-Lock leds are dead at lock, which is pretty bad I think. | 18:07 |
| amgarchIn9 | So far I know the problem occurs also with display efects (compositing?) disabled. | 18:08 |
| tormod | amgarchIn9, intel can still hang :) do you have another machine for ssh? | 18:08 |
| amgarchIn9 | tormod: You think it is worth trying? Even the (ACPI-) power button is ignored when the machine locks. Long-pressing that will poweroff of course. | 18:12 |
| amgarchIn9 | I may later try booting without KMS as you suggested, if you thing it may be related. | 18:13 |
| tormod | amgarchIn9, ok usually the power button should react. but anyway, a second computer would be handy, for example for netconsole | 18:13 |
| tormod | amgarchIn9, check the intel-gpu-tools package also | 18:13 |
| amgarchIn9 | tormod: ok, I am back reading the internets. Thank you for tips. | 18:15 |
| tormod | amgarchIn9, https://edge.launchpad.net/~ubuntu-x-swat/+archive/x-freeze-test | 18:15 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!