[02:55] <Turtle_> Hi, it seems that I have found a bug in the kernel related to my Ralink RT61PCI wifi card. Here are some logs http://paste.ubuntu.com/305551/ and kernel logs http://paste.ubuntu.com/305556/. I'm also filling a bug report as we speak :(
[07:25] <Appiah> I upgraded to Karmic and my network support is gone, both wlan and cable. I tried starting from a LiveCD and same problem there. Tried using the previous kernel and networking is fine there.
[07:25] <Appiah> Should I file a bug report?
[07:25] <Appiah> or am I doing something wrong
[08:19] <Appiah> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/418933 found a bug report and a solution that works
[08:19] <ubot3`> Malone bug 418933 in linux "no internet connection (wifi+ethernet doesn't work)" [Low,Incomplete] 
[08:23]  * nigel_c wonders how importance gets decided :/
[08:24] <Appiah> well there's alot to do! :)
[08:26] <nigel_c> Yeah, but networking simply not working is a bit of a show stopper for those affected :)
[08:41] <^arky^> Hi, Anyone seen these ALSA underrun and wake errors http://pastebin.ubuntu.com/304936/
[14:14] <alexis_> hi ! why in the karmic repositories, the are not linux-restricted package (for 2.6.31) ??
[14:50] <alexis_> why using DVB is so hard with the karmic's kernel. i have 2 usb dvb card supposed to work in linux. but its seem impossible to make it work. Artec T1   and another: terratec cinergy t usb xxs ....
[14:51] <alexis_> 3 hours to try to make it work without any result...
[14:51] <alexis_> If it is not a kernel problem, its a ubuntu bug...
[15:46] <ghostcube> guys since the update to karmic the uvc driver doesnt show any picture for my cam
[15:46] <ghostcube> cam gets detected but no output
[15:47] <ghostcube> i tried so far all webcam tools but same result
[16:07] <alexis_> maybe cause linux-restricted is not in the depositories for the karmics kernel?
[16:07] <alexis_> (i have also some difficulties with some drivers
[16:07] <alexis_> specially for dvb hardware that are suppoed to work under linux since 2.6.18.....
[16:07] <alexis_> :(
[16:09] <dtchen> alexis_: linux-restricted* went away for 9.10. What do you need it for?=
[16:09] <dtchen> alexis_: i.e., you should be using DKMSized versions if it all possible
[16:09] <dtchen> ghostcube: please file a bug: ubuntu-bug linux
[16:10] <alexis_> i'm not developper, i just tried to make workin my harware. So i try differtn way, and in some howto, linux-restrictd- is needed..
[16:12] <alexis_> it seem that my probleme is linked to new kernel
[16:12] <dtchen> alexis_: again, linux-restricted* is gone. Please use the appropriate DKMSized packages.
[16:12] <alexis_> (all was working fine in 2.6.24
[16:12] <alexis_> ok
[16:13] <alexis_> but what do you mean about DKMSized packages?
[16:15] <alexis_> for example, i just want to make work that
[16:15] <alexis_> http://linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_XXS
[16:18] <alexis_> dmk: i suppose that it mean that i just need to have te good module for my hardwaren and, this module will be loaded?
[16:18] <alexis_> but with a sudo modprobe dvb-usb-dib0700 , nothing special happens
[16:19] <alexis_> i have just, after: alexis@brocoli:~/v4l-dvb$ dmesg | grep -i dvb
[16:19] <alexis_> [ 4459.067798] usbcore: registered new interface driver dvb_usb_dib0700
[16:20] <alexis_> but nothing workin more, and lsusb give me a geneic outbut without specify the model's name...
[16:20] <alexis_> lsusb: Bus 001 Device 016: ID 0ccd:00ab TerraTec Electronic GmbH
[16:21] <ghostcube> dtchen: done https://bugs.launchpad.net/ubuntu/+source/linux/+bug/466935
[16:21] <ubot3`> Malone bug 466935 in linux "No Video Output in Karmic with ID 046d:09a1 Logitech, Inc. QuickCam Communicate MP/S5500" [Undecided,New] 
[16:23] <dtchen> alexis_: does it require firmware? Do you have linux-firmware installed?
[16:24] <alexis_> yes it require, yes it is installed
[16:25] <dtchen> alexis_: and are you positive you don't need to pass additional parameters at insmod time?
[16:26] <alexis_> i dont know, the module is supposed to be loaded automattically, no?
[16:27] <alexis_> i tried too to compile v4l-dvb drivers, but i got some error with make...
[16:29] <alexis_> http://paste.ubuntu.com/305889/
[16:30] <alexis_> (after reboot and reboot) dmesg: http://paste.ubuntu.com/305932/
[16:30] <dtchen> please use #ubuntu for support
[16:31] <alexis_> i yet tried :)
[16:32] <alexis_> an other kernel question so. it is also about another dvb-usb hardware. In hardy 2.6.24, workin right just adding dvb-usb-dibusb-an2235-01.fw
[16:33] <alexis_> but in jaunty and karmic now, i see in  /boot/config-2.6.31-14-generic:
[16:33] <alexis_> CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
[16:34] <alexis_> (line 3011)
[16:34] <alexis_> and it is needed to use this other dvb-usb harware, Artec T1
[16:35] <alexis_> why is "not set" and no "y" or "m" ?
[16:38] <alexis_> "Support faulty USB IDs" option is enabled.  was enabled in hardy .....
[16:47] <dtchen> can't tell offhand if it was just disabled inadvertently
[16:47] <dtchen> doesn't seem to depend on anything marked experimental or broken
[16:50] <alexis_> sorry a patch yet exist for this point: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/448908
[16:50] <ubot3`> Malone bug 448908 in linux ""Artec T1 AN2235 DVB USB" device is no more detected" [Medium,Incomplete] 
[16:50] <alexis_> i just saw that right now
[16:50] <alexis_> :)
[17:51] <amgarchIn9> is there any experience if linuc-crashdump helps to trace complete locks in graphical logins?
[17:54] <amgarchIn9> How much memory does it take away with this cmdline option?: crashkernel=384M-2G:64M,2G-:128M. Is this memory reserved for crashdump during normal operation?
[17:56] <tormod> amgarchIn9, intel GPU?
[18:01] <amgarchIn9> tormod: yes, why? It is 9.10 already, not 9.04. The GPU is not any of the recent ones: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03). I also guess a wireless stack may be involved in a crash.
[18:03] <tormod> amgarchIn9, what has 9.04/9.10 to do with it? you mean it is not caused by the GPU? try booting with "nomodeset" or use the vesa driver
[18:04] <tormod> amgarchIn9, are you sure the system is locked and just not the screen/console?
[18:07] <amgarchIn9> tormod: i meant the sorrow state of intel graphics in 9.04. The locks are occasional but seem to correlate with graphic layer activitiy and high wifi traffic. Cups-Lock/Num-Lock leds are dead at lock, which is pretty bad I think.
[18:08] <amgarchIn9> So far I know the problem occurs also with display efects (compositing?) disabled.
[18:08] <tormod> amgarchIn9, intel can still hang :) do you have another machine for ssh?
[18:12] <amgarchIn9> tormod: You think it is worth trying? Even the (ACPI-) power button is ignored when the machine locks. Long-pressing that will poweroff of course.
[18:13] <amgarchIn9> I may later try booting without KMS as you suggested, if you thing it may be related.
[18:13] <tormod> amgarchIn9, ok usually the power button should react. but anyway, a second computer would be handy, for example for netconsole
[18:13] <tormod> amgarchIn9, check the intel-gpu-tools package also
[18:15] <amgarchIn9> tormod: ok, I am back reading the internets. Thank you for tips.
[18:15] <tormod> amgarchIn9, https://edge.launchpad.net/~ubuntu-x-swat/+archive/x-freeze-test