=== miguel is now known as Guest75182 | ||
tgm4883 | foxbuntu! | 00:29 |
---|---|---|
foxbuntu | tgm4883! | 00:30 |
foxbuntu | tgm4883, perhaps you should unban me in the other channel? | 00:30 |
tgm4883 | you are not banned | 00:31 |
tgm4883 | alright, home time | 00:32 |
Technophil | openmedia: could the problem be hardware based? | 00:32 |
Rob_Z | so it appears to be something lirc in 9.10 w/my hauppauge card, cause things work just fine in 9.04 | 00:37 |
tmkt | Robz what issue? | 00:42 |
tmkt | I had issue with 9.10 and hauppauge 1600 | 00:43 |
Rob_Z | doesn't work at all | 00:48 |
Rob_Z | irw doesnt' show anything | 00:48 |
Rob_Z | but everything works on 9.04 | 00:49 |
tmkt | yeah | 01:00 |
tmkt | same for me | 01:00 |
tmkt | same card? | 01:00 |
tmkt | hvr-1600? | 01:00 |
tmkt | http://old.nabble.com/lirc-i2c-does-no-longer-work-with-Hauppauge-HVR-1300--td25740534.html | 01:01 |
tmkt | got it working | 01:01 |
tmkt | afraid to reboot right now because of the kernel fixes i saw in the this morning update | 01:01 |
Rob_Z | I have a 1600 and a 150 | 01:07 |
Rob_Z | the remotes work for both in 9.04, and don't work in 9.10 | 01:07 |
Rob_Z | I have 2 boxes up, one with each card, so I'll try to figure out what the heck changed, but packages are the same | 01:08 |
Rob_Z | with the 9.04 /etc/lirc/* I at least get /dev/lirc0, with the 9.10 I don't get that | 01:09 |
Rob_Z | but irw still doesn't read anything. | 01:09 |
Rob_Z | but with the holidays coming up and cooking for 26 people I won't have much time. | 01:09 |
OpenMedia | Technophil: There is always that chance. RAM has been tested and I've stressed the CPU. It has been running an older Knoppmyth based build for quite some time. | 01:14 |
OpenMedia | The only recent change was a CPU upgrade from an X2-3600+ to an X2 5050e | 01:15 |
OpenMedia | Some guys on the NZ MythTV mailing list are also seeing occasional segfaults as well. | 01:16 |
* Rob_Z kicks brown | 01:35 | |
tmkt | Robz if you go to lirc | 01:36 |
tmkt | j-rod | 01:36 |
tmkt | solved it for me in 10 minutes | 01:36 |
tmkt | gave him acces to my box | 01:36 |
Rob_Z | not going to do that :) | 01:53 |
Rob_Z | won't be giving people access to my box, plus want to know why and what to do...cause I'm going to reroll some stuff | 01:56 |
abarbaccia | hey team - just moved mythbuntu to my TV and something about my edid settings on the panel are causing the fonts in mythbuntu to be HUGE | 03:16 |
groogs | I have a problem with aspect ratios, looking for some guidance. it *was* working okay, and then I had a monitor connected, had to mess with amdcccle (using fglrx driver) to get my hdmi-connected TV working as primary again, and since then, menus are fine, but video all plays squished horizontally. as in, all content is about 3/4 the width it normally would be (height is fine): 16:9 content... | 03:19 |
groogs | ...is about the same screen area/shape as 4:3 would be normally, 4:3 is probably 1/3 the width of the TV | 03:19 |
groogs | and like an idiot, i forgot to make a backup of xorg.conf when it was actually working. really, i have no clue what is different, i didn't change anything in myth, and like i said, menus are totally fine and fill the full screen | 03:20 |
=== bogus is now known as Guest71084 | ||
khunt | how do I adjust the streaming settings for mythweb. In mythweb I can only see options to enable flash and https | 09:09 |
Lunar_Lamp | I have noticed a couple of scripts in mythbuntu that I believe could be improved somewhat. | 13:42 |
Lunar_Lamp | Where can I submit these changes? | 13:42 |
Lunar_Lamp | e.g. the mythvideo cronjob scripts. | 13:42 |
mrand | Lunar_Lamp: Best way that it wouldn't get lost would be to submit a launchpad ticket in the Mythbuntu bucket. Then the maintainers can determine if it fits with their ideas of what they want to do going forward (or if they want/need to go a different direction). Just saying don't get disheartened if a proposal doesn't make the cut - they always appreciate the help/thought! | 15:45 |
Lunar_Lamp | mrand: oh yeah, I know that things aren't always accepted etc. | 15:46 |
mrand | Cool. | 15:46 |
tmkt | Rob_Z: the link i sent yesterday explains why | 16:27 |
tmkt | http://old.nabble.com/lirc-i2c-does-no-longer-work-with-Hauppauge-HVR-1300--td25740534.html | 16:27 |
superm1 | mrand, did you give the -dbg packages a shot at all? | 16:32 |
superm1 | there should be both a mythtv-dbg and a mythplugins-dbg on the fixes repo | 16:32 |
superm1 | the trunk repo doesnt have them yet | 16:32 |
superm1 | it was a two line change to fix it on trunk, so trunk should have them too now | 16:38 |
mrand | superm1: *slapsforehead* I got the mythtv-dbg, but not mythplugins-dbg | 16:40 |
mrand | Guess that bug report I submitted last night will be a bomb. | 16:40 |
mrand | I'll try again tonight. | 16:41 |
mrand | (it has to do with mythvideo) | 16:41 |
superm1 | haha | 16:43 |
superm1 | well luckily enough mythplugins-dbg depends on mythtv-dbg | 16:43 |
mrand | but not the other way around, so it didn't install plugings-dbg | 16:43 |
superm1 | right | 16:43 |
mrand | I'll go cancel the apport run on it. | 16:43 |
superm1 | hopefully users *don't* have to do a local retrace with these packages installed though | 16:43 |
superm1 | i'm not sure yet | 16:43 |
mrand | Hmmm... if I remove those attachements and get the others on there fast enough, I should be higher up in the apport queue, right? | 16:44 |
mrand | err... retracer | 16:44 |
superm1 | no idea | 16:44 |
mrand | I think I'll leave it for now and see if I can sneak in. A month ago, it took forever to get a retrace. | 16:45 |
mrand | superm1: a retrace is still necessary, right? The default stack trace still didn't have anything (Bug #487413) | 16:45 |
superm1 | bug 487413 | 16:46 |
mrand | well, anything useful. | 16:46 |
mrand | yeah | 16:46 |
superm1 | Zinn, where you at man | 16:46 |
mrand | hahah | 16:46 |
superm1 | (i was hoping for a URL) | 16:46 |
mrand | https://bugs.launchpad.net/bugs/487413 | 16:46 |
superm1 | oh weird i dont have permissions there | 16:46 |
mrand | that's funny. | 16:47 |
mrand | In a very non-funny way. | 16:47 |
superm1 | ironic maybe | 16:47 |
mrand | yeah, that too. | 16:47 |
mrand | You know security is minimal though, right? http://launchpadlibrarian.net/36002021/Stacktrace.txt | 16:49 |
superm1 | i dont think the retracer will be able to help with that since it wont know how to install the -dbg package | 16:53 |
superm1 | which makes me think that people will need to do local retraces | 16:53 |
superm1 | at least when using the ppa | 16:53 |
mrand | superm1: ug. Steps still the same as what we talked about before though? I must say I find it a bit amazing (in an absurd sort of way) that the stack trace is 43 deep. | 16:54 |
superm1 | with the exception that we now have -dbg packages rather than ddebs | 16:54 |
superm1 | so i think it should actually be a little easier | 16:54 |
superm1 | will just need some experimentation to figure out for sure | 16:55 |
williammanda | I installed the repo yesterday but my release 0.22.0+fixes22594 is still the same.... | 17:19 |
williammanda | I selected ver .22, US and didn't select PPA...did I make a mistake during the install? | 17:20 |
williammanda | I was looking for an up to date .22 ver not testing | 17:21 |
mrand | Did you do a "check for new release" or apt-get update to fetch listings from the repo? I suppose it is possible that the US mirror is not updating... I know at one point they had trouble withthat. | 17:27 |
mrand | errr.. not check for new release, but "check for new" | 17:27 |
mrand | or whatever update manager and/or synaptic calls it. | 17:28 |
williammanda | no I didn't do this in synaptic of apt-get | 17:28 |
williammanda | I used a link off of the mytbuntu site | 17:29 |
williammanda | or = of | 17:29 |
mrand | Ok, I just checked... in update-manager it is "check". could you try something for me? Either click that button, or do an sudo apt-get update | 17:30 |
mrand | Then see if it wants to update your myth packages. | 17:30 |
mrand | Or you can check in synaptic. | 17:30 |
williammanda | ok..using synaptic...it looks like several myth files need to be updated | 17:31 |
mrand | examples? | 17:31 |
williammanda | lib files, back & front ends, themes, etc... | 17:32 |
mrand | cool. | 17:32 |
williammanda | so that was the problem? | 17:33 |
mrand | Yeah - I think I noticed the same thing last night, actually. | 17:33 |
williammanda | k ty | 17:34 |
mrand | no problem! | 17:34 |
linxeh | is there a way to import DVDs into mythtv from the command line ? | 17:59 |
tgm4883 | linxeh, you mean rip them? | 18:00 |
errr-or | hi, how to set nautilus as standard file manager? i need to open my pda with synce, but i need to open it with nautilus. | 18:00 |
linxeh | tgm4883: I want to make a de-css'd copy of my dvd collection onto a hard drive, as ISOs or something | 18:01 |
tgm4883 | ah | 18:01 |
tgm4883 | yea I don't know then | 18:02 |
linxeh | then have those available through mythtv | 18:02 |
tgm4883 | i'm sure there are some rippers via command line though | 18:02 |
linxeh | I'm not bothered about transcoding etc, but Id like to do it in bulk | 18:02 |
linxeh | atm I'm using vobcopy, but it seems to hang on several of my dvds | 18:02 |
errr-or | second question. i have installed lirc and created a lircrc file. if i manually start lirc i see the input of my device, but it doesnt work in mythbuntu. here is my mythtv configuration --> http://pastebin.ca/1685715 . | 18:06 |
errr-or | linxeh: i use dvddecrypter with wine. works fine | 18:06 |
linxeh | yuck :) | 18:09 |
linxeh | might be the easiest though I suppose | 18:09 |
errr-or | linxeh: if you try it you have to change i/o driver to winaspi. default is elby. so it doesnt find your drive | 18:10 |
errr-or | sorry for my poor english ;) | 18:10 |
linxeh | ok cool | 18:36 |
williammanda | On the slave backend does one need to setup storage groups for the artwork so that it can be used for videos if the video storage group is not setup? ie coverart, fanart and banners | 18:42 |
superm1 | you only need one set of storage groups for those | 18:43 |
superm1 | so if you have a master backend setup already with them that's all you need | 18:43 |
williammanda | ok...that must be my problem | 18:43 |
williammanda | one more question....do I need the storage groups for recordings & livetv on the slave BE? | 18:45 |
superm1 | well do you have local media on that backend to store it on? | 18:53 |
williammanda | yes | 18:53 |
superm1 | then make a storage group for it | 18:53 |
williammanda | ok ty | 18:53 |
khunt | how do i stop my system from displaying lcdproc server every now and then iinbetween myth info? | 19:25 |
linxeh | you have to edit one of the config files | 19:33 |
linxeh | sec | 19:33 |
khunt | hmmkay | 19:38 |
linxeh | in LCDd.conf set ServerScreen=no | 19:39 |
linxeh | or off even | 19:39 |
khunt | its no | 19:41 |
khunt | its there but commented out | 19:41 |
linxeh | so uncomment it | 19:42 |
khunt | do i have to restart something | 19:42 |
linxeh | (by default it is yes) | 19:42 |
linxeh | or on | 19:42 |
linxeh | yes, restart lcdd | 19:42 |
linxeh | sudo service LCDd restart | 19:42 |
khunt | cool thanks | 19:44 |
khunt | that id it | 19:44 |
khunt | did | 19:44 |
linxeh | cool | 19:44 |
khunt | do you use the default codecs or do you change them | 19:44 |
khunt | im getting some tearing on recordings playback | 19:45 |
Mask^ | hello | 19:57 |
Mask^ | !help | 19:58 |
Zinn | !help For a complete list of my knowledge visit: http://www.baablogic.net/Zinn.cgi Other available commands: !status, !about, !bug [bug_number]. | 19:58 |
Mask^ | my screen flickers in X. I looks like it's changing gamma levels really fast. it only does this when i attach it to the tv. | 20:01 |
Mask^ | with HDMI | 20:01 |
Mask^ | I also have problems with MKV files not playing sound. when i open them with vlc they work ok, but when I open them in MythTV.internal there is no sound. If I have MythTV use vlc it gives me an error. | 20:05 |
errr-or | anyone could tell me how to set nautilus as default file-manager? | 20:13 |
khunt | what is the key name for skip back in mythbuntu? | 20:37 |
khunt | im trying to set up remote | 20:37 |
errr-or | is it possible to sort out my channels manually? means is there a config file i could edit? | 20:39 |
khunt | channels | 20:41 |
khunt | i did mine through mythweb | 20:41 |
khunt | where is lirc.conf in mythbuntu? | 20:51 |
Rob_Z | in /etc/lirc/lirc.conf | 21:09 |
khunt | found it | 21:14 |
khunt | i also edited ~.mythtv/lircrc to correspond to my button names in lircd.conf | 21:15 |
khunt | but still not working | 21:15 |
khunt | do i need a restart or something? | 21:15 |
errr-or | khunt: thanks. sorted it now... damn im dizzy from all the clicking :D | 21:30 |
Zinn | errr-or: Please watch your language. | 21:30 |
errr-or | ;) | 21:30 |
errr-or | another little problem i have :) myth-tv frontend doesnt fit completely onto my tv | 21:31 |
errr-or | i have a 'bar' with my background while i watch tv | 21:31 |
errr-or | hmm seems my dual screen setup doesnt like this :( | 21:37 |
errr-or | but i was able to manually move it to where it belongs :P | 21:37 |
errr-or | enough for today.. time to watch tv | 21:37 |
errr-or | good night to all | 21:37 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!