[00:00] <phoenixz> I have an ubuntu computer which I want to switch to kubuntu... Practically, I want to kick all gnome related stuff off, I want to stay with KDE4 only..How do I do this?
[00:00] <nicklas_> phoenixz: reinstall with kubuntu?
[00:01] <phoenixz> nicklas_: no option, this computer is on the other side of the world.. I need to do it over SSH
[00:01] <Vroomfondle> that might actually be a bit tricky these days, as uninstalling ubuntu-desktop doesn't actually uninstall GNOME (IIRC)
[00:01] <franarza_> updated xorg, now wifi doesn't work :( anyone can help¿
[00:02] <Vroomfondle> I tend to just install kubuntu-desktop and just ignore gnome, as disk space is cheap
[00:03] <jacquesdupontd> i tried disabling some services and same thing
[00:03] <jacquesdupontd> the screen stays black, then i just have to enable the wifi or plug the ethernet cable and everything loads
[00:03] <jacquesdupontd> amazing no ?
[00:03] <jacquesdupontd> i'm sure there's another better service management that the one given by default
[00:04] <franarza_> can anyone help me?
[00:04] <jacquesdupontd> ok another try
[00:04] <jacquesdupontd> bbl
[00:05] <franarza_> jacquesdupontd you were trying to help me?
[00:08] <jacquesdupontd> same thing
[00:08] <jacquesdupontd> im sure it's about those plasmoid needing internet to load
[00:09] <jacquesdupontd> but anyway it shouldn't need that
[00:10] <jacquesdupontd> i can't be the only one to have this problem
[00:10] <jacquesdupontd> everybody tries to reboot without any internet connection you gonna see
[00:12] <nicklas_> kde is so good :-D
[00:39] <ken> Hello! I just have a question. How would I set up to use the KDE 4.4 branch?
[00:40]  * BluesKaj has to remember to check the room header posts everyday
[00:41] <BluesKaj> ken, check the header messages
[00:52] <nonameNN> how can i hide amarok 2.2.1 menu bar??
[00:54] <cory> hello
[00:55] <Guest3258> hello
[00:55] <Guest3258> I need help with monitor detection
[00:55] <cory_> hello?
[00:56] <leetlargo> ok i'm thinking about switching to kubuntu how does it handle flash players such as youtube, and stuff like that?
[00:57] <cory_> let me find out
[00:57] <leetlargo> ok thanx
[00:58] <cory_> its working well in firefox
[00:58] <cory_> im not getting sound but im still setting this up
[00:58] <leetlargo> hmmm
[00:58] <cory_> i am in amarok
[00:58] <cory_> but not with youtube
[00:58] <leetlargo> could you try out another site for just to see if it will work and how hard is it to install and set up?
[00:59] <cory_> hulu works well
[00:59] <cory_> but once again no sound for me
[00:59] <leetlargo> hmmm
[00:59] <leetlargo> ok
[01:00] <cory_> starcraft2.com is working brilliantly in my system
[01:00] <cory_> but no sound again
[01:00] <cory_> its probably just my computer
[01:00] <cory_> im really liking kde
[01:01] <leetlargo> well right now i have "edubuntu" what ever that is, but i think it is gnome based and so far flash players BARELY work
[01:01] <leetlargo> its a huge hassle
[01:03] <cory_> im not sure
[01:03] <cory_> the flash players on this work great
[01:03] <cory_> but im not sure about the sound
[01:04] <leetlargo> hmmm
[01:04] <jacquesdupontd> ok i found the problem for those who had a screen that wouldn't load desktop if they didn't had an internet connectin, it was because of some plasmoid
[01:04] <leetlargo> the sound kinda bugs me about the sound......... will lime wire work on there?
[01:04] <jacquesdupontd> if you have plasmoid that requires an internet connection the desktop is not loading until you have an internet connection
[01:04] <jacquesdupontd> now that works perfectly
[01:06] <leetlargo> what does limewire? and what is a plasmoid?
[01:07] <cory_> ?
[01:07] <cory_> amarok works
[01:07] <cory_> so the sound works on my system
[01:07] <leetlargo> hmm
[01:08] <leetlargo> well i'm thinking about switching but no sound......me and me roomate cant live without our music......... and how hard is it to set up and internet connections with kubuntu?
[01:08] <cory_> not at all
[01:08] <cory_> i just plugged in the cord
[01:08] <cory_> the music works just fine
[01:08] <cory_> amarok works great
[01:08] <cory_> just not on flash
[01:08] <FloodBotK2> cory_: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[01:08] <cory_> for MY computer, i would say that for yours the sound will probably work
[01:13] <leetlargo> hmmm. ok. well i will probably make the switch tonight. the only thing is if i mess up i'm kinda screwed because my laptop was stolen and my other rigs are KIA at the moment i have a new rig that has a short somewhere and won't boot up
[01:13] <leetlargo> but i don't have money to replace the parts.
[01:13] <cory_> it shouldnt be that difficult a switch
[01:13] <cory_> you an probably install kde right on edubuntu
[01:13] <franarza_> hi
[01:14] <leetlargo> well thanks for the help, i'm gonna go make an iso right now, idk i think i might just whipe and restart from scratch but keep my grub and my partition
[01:15] <franarza_> can anyone help me? i've updated xorg, and now wireless just doesn't work, i'm using Kubuntu, with KDE 4.3.3.. it used to work before the xorg got updated.. now it is enabled.. but it just wont work..:(
[01:17] <franarza_> can anyone help me? i've updated xorg, and now wireless just doesn't work, i'm using Kubuntu, with KDE 4.3.3.. it used to work before the xorg got updated.. now it is enabled.. but it just wont work..:(
[01:19] <franarza_> can anyone help me? i've updated xorg, and now wireless just doesn't work, i'm using Kubuntu, with KDE 4.3.3.. it used to work before the xorg got updated.. now it is enabled.. but it just wont work..:(
[01:21] <geekles> franarza_: have you tried installing linux-backports-modules-karmic?
[01:22] <geekles> helped with my wireless issues
[01:24] <franarza_> :o
[01:25] <franarza_> geekles it used to work fine before the update.
[01:25] <geekles> yeah, i got that... it might be a driver conflict and thought maybe updated wireless drivers would help
[01:26] <franarza_> ok, so how do i install'em?
[01:27] <geekles> sudo aptitude install linux-backports-modules-karmic
[01:27] <geekles> (assuming you're running karmic)
[01:27] <franarza_> i'm running karmic with 2.6.31-15 kernel
[01:27] <geekles> or just search for that package in kpackagekit if you're more comfortable with the gui
[01:28] <franarza_> i really like the konsole.. :)
[01:28] <geekles> cool
[01:28] <geekles> what wireless card are you using?
[01:28] <franarza_> thanks i'll try
[01:29] <franarza_> i'm on an eeepc 100he.. it uses an aw-ne766..
[01:29] <franarza_> 1000he
[01:31] <franarza_> there is a linux-backport-wireless-module should i install it?
[01:34] <juan__> an xorg update shouldn't mess with wireless, it might mess knetworkmanager but you shouldn't need to install backports
[01:35] <franarza_> juan__ i don't know what happened..
[01:35] <franarza_> that's the only modification i did..
[01:35] <franarza_> kpackage kit suggested the xorg update
[01:36] <franarza_> when i rebooted i found that wireless doesn't work..
[01:36] <franarza_> now i'm online on ethernet connection
[01:37] <juan__> well try geekles fix as it may work, but it sounds like it's more likely to be a knetworkmanager problem, what do you get if you run nm-tool from a command line
[01:38] <franarza_> No command 'nm_tool' found, did you mean:
[01:38] <franarza_>  Command 'nm-tool' from package 'network-manager' (main)
[01:38] <franarza_> nm_tool: command not found
[01:38] <juan__> how were you managing wireless? wicd?
[01:38] <geekles> yeah nm-tool
[01:38] <geekles> not nm_tool
[01:43] <franarza_> :o
[01:43] <franarza_> NetworkManager Tool
[01:43] <franarza_> State: connected
[01:43] <franarza_> - Device: eth0  [Auto eth0] ----------------------------------------------------
[01:43] <franarza_>   Type:              Wired
[01:43] <franarza_>   Driver:            ATL1E
[01:43] <FloodBotK2> franarza_: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[01:43] <franarza_>   State:             connected
[01:44] <franarza_> it says device:wlan0 when it should say ra0
[01:45] <nicklas_> anyone awake? :-P
[01:46] <juan__> wlan0 sounds right, if it has recently changed then the problem may be with wifi drivers are you sure the update didn't do more than just xorg
[01:46] <franarza_> nono
[01:46] <franarza_> before the update
[01:46] <juan__> could you pastbin the output of nm-tool
[01:46] <franarza_> it said ra0
[01:47] <franarza_> now it says wlan0
[01:47] <franarza_> i pasted it here.. but a floodbot told me to use paste.ubuntu.com and i don't know how to use it
[01:48] <nicklas_> anyone knows if you can get tranparent chat window in konversation like in xchat-gnome ?
[01:49] <juan__> wlan0 sounds right, maybe all the knetworkmanager settings are broken, you could try connecting manually / clearing the settings / using network-manager-gnome , however if your drivers changed (and it sounds like they have) i would follow gekles advice first and install backports, then reboot
[01:49] <juan__> nicklas_: you can use kwin level compositing but AFAIK kwin doesn't do that offer transparency itself
[01:50] <juan__> anybody got any ideas why su juan startx fails to do anything in my rc.local
[01:50] <franarza_> i'm installing'em.. but i wanted to be sure that there weren't anything else i could do.. thanks for the help.. sorry for the english :)
[01:52] <arcorc> holaaaaaa alguien habla español???
[01:52] <franarza_> yo
[01:52] <juan__> !es
[01:53] <arcorc> una pregunta como hago para instalar protectores de pantallas aca en kubuntu
[01:53] <franarza_> screensavers?
[01:53] <franarza_> vienen instalados algunos por defecto
[01:53] <franarza_> para instalar mas
[01:53] <franarza_> te recomiendo el paquete
[01:53] <franarza_> electricsheep
[01:54] <osanllyer> 这是什么语言阿
[01:54] <osanllyer> 看不懂
[01:54] <arcorc> como lo encuentro
[01:54] <franarza_> espera que me estoy fijando
[01:55] <arcorc> instale la version free y trae nada de protectores de pantalla
[01:56] <franarza_> la version free de que?
[01:56] <arcorc> de kubuntu
[01:56] <franarza_> kubuntu es siempre free!
[01:56] <franarza_> pero esperame un segundo que reviso..
[01:56] <franarza_> yo no uso screensaver.. por eso no conozco algo tan simple. pero ya te digo!
[01:57] <arcorc> bueno pero tambien podes mandar a pedir el cd yo solamente lo baje de internet a eso me refiero
[01:57] <arcorc> yo para que el monitor no quede mostrando en lo que estoy trabajando cuando salgo de la maquina
[01:59] <franarza_> podes poner simplemente que en X tiempo se apague el monitor, y cuando moves el cursor se reactive..
[02:00] <jfrye> hey
[02:00] <franarza_> para bajar otros salvapantallas
[02:01] <franarza_> pone "screensaver" en el KpackageKit e instala el paquete kscreensavers
[02:01] <arcorc> vos te manejas en modo consola o mediante ventana?
[02:01] <franarza_> yo manejo los dos
[02:01] <franarza_> pero te recomiendo el kpackagekit porque te da una descripcion del paquete que evas a instalar
[02:01] <Pici> !es
[02:02] <arcorc> yo estoy aprendiendo a usarlo (linux) y por ahora me identifico por haber trabajado con windows antes en modo ventanas
[02:02] <arcorc> quiero aprender mas de modo consola
[02:02] <Pici> Este canal es el Inglés solamente. Por favor, use Kubuntu-es # o # ubuntu-es para el español
[02:02] <franarza_> si queres instalar desde la consola
[02:02] <franarza_> arcorc agregame a mi msn
[02:03] <franarza_> arzafran@gmail.com
[02:03] <Pici> No quiero tener que eliminar ninguno de los dos.
[02:03] <franarza_> sorry pici
[02:03] <arcorc> perdon
[02:03] <franarza_> he's a noob user
[02:03] <Pici> Can you tell him to /join #kubuntu-es ?
[02:04] <franarza_> ok, i'll tell
[02:04] <franarza_> arcorc dice que vayas al canal en español #kubuntu-es
[02:04] <franarza_> sorry pici!
[02:04] <arcorc> ya estoy ahi vos no estas ahi
[02:05] <juan__> #kubuntu-es esta vacio intenta #ubuntu-es
[02:05] <arcorc> se leer ingles un poco no escribir mucho
[02:17] <zhanes> hello here
[02:19] <osanllyer> hi
[02:25] <zhanes> there are kde 4.3 for intrepid in ppa?
[02:27] <franarza_> juan__ now nm-tool doesn't even recognize my wireless modem.. -.-
[02:27] <juan__> franarza_: this is after installing backports and rebooting
[02:27] <juan__> ?
[02:28] <franarza_> yes it is
[02:29] <franarza_> i'll reboot once again, i'll be back on a minute
[02:30] <juan__> try restarting networkManager (service network-manager --full-restart)
[02:39] <osanllyer> is there any significiant improvements in KDE4.3.3?
[02:40] <zhanes> more stability
[02:41] <zhanes> firsts versions of kde has many bugs
[02:43] <Walzmyn> osanllyer: http://www.kde.org/announcements/changelogs/changelog4_3_2to4_3_3.php
[02:43] <osanllyer> o~ i'll check it. :P
[02:45] <Aruna> Yesterday i formatted my HP Laptop and installed Ubuntu completely. My Laptop has only Ubuntu and i installed Kubuntu desktop over it. it worked yesterday fine when i start my laptop now after booting when it displays Kubuntu logo noting displays on my desktop,
[02:46] <Aruna> Any one tell me what is the problem.
[02:46] <cory_> hellow
[02:47] <sparrowg> did u install kubuntu desktop on ubuntu kernel?
[02:47] <Aruna> Anyone help me on this ?
[02:47] <sparrowg> did u install kubuntu desktop on ubuntu kernel?
[02:47] <Aruna> first i installed Ubuntu OS throught ISO  9.10
[02:48] <cory_> please help, I accdiently pressed remove table partion in gparted
[02:48] <Walzmyn> cory did you apply the changes?
[02:48] <sparrowg> Aruna: then? how did u install kubuntu desktop?
[02:48] <cory_> uh
[02:48] <cory_> i closed gparted
[02:48] <zhanes> there'snt problem in install kubuntu desktop on ubuntu distro
[02:49] <zhanes> the problem is karmic kernel
[02:49] <zhanes> is very unstable
[02:49] <Aruna> sparrowg: yesterday i first installed Ubuntu.. later i installed kubuntu desktop over it.. and all worked fine but now when i book my loptop it displays blank screen
[02:49] <Walzmyn> cory_: I'm thinking that if you didn't commit the changes, nothing actually happened
[02:49] <cory_> well i accidently closed the gparted
[02:49] <cory_> i opened it back up
[02:49] <cory_> and it says unallocated everything. currently i didnt restart or anything
[02:50] <sparrowg> when exactly does the screen blank out?
[02:50] <zhanes> image apear on uvuntu usplash?
[02:51] <zhanes> image apears on ubuntu usplash?
[02:51] <Aruna> what to do now :(
[02:52] <zhanes> Aruna, apears someone images on grub or usplash screen in boot, before Desktop entering?
[02:53] <sparrowg> Aruna: when does the screen go blank?
[02:53] <Aruna> once booting.. when it displays Kubuntu splash screen and when it reaches login screen before it displays login it goes to blank screen.
[02:54] <DarkwingDuck> what kind of video card do you have?
[02:54] <Aruna> dont know
[02:54] <Aruna> Intel
[02:54] <zhanes> there are someone information saying: Kernel Panic?
[02:54] <Aruna> nothing.
[02:54] <DarkwingDuck> intel video card?
[02:54] <sparrowg> did you try recovery mode?
[02:55] <zhanes> are you updated xorg intel drivers on repository?
[02:55] <Aruna> i dont see any option.
[02:55] <Aruna> when it boots it first displays HP logo later Kubuntu logo and it goest to black screen
[02:56] <zhanes> grub kernel version (safe mode)
[02:56] <Aruna> i dont see any safe mode option
[02:56] <zhanes> then try to fix xinit
[02:56] <Aruna> i seen only these 2 ,  first displays HP logo later Kubuntu logo and it goest to black screen
[02:57] <zhanes> arent grub installed?
[02:57] <Aruna> i dont know.. i downloaded Ubuntu 9.10 ISO and burnt to CD and formatted my whole laptop
[02:58] <zhanes> is your ubuntu installation disc offered by HP?
[02:58] <zhanes> that's right
[02:58] <Aruna> no no Downloaded from Ubuntu site.
[02:59] <zhanes> try it: when apear blank screen type together Ctrl + Alt + F1
[02:59] <osanllyer> Press Ctrl + Alt + F2
[03:00] <zhanes> alright, better Ctrl + Alt + F2
[03:00] <zhanes> thx osanllyer
[03:02] <Aruna> i see a blurred 2 line text i cant read properly
[03:02] <zhanes> what do you think osanllyer?
[03:03] <Aruna> is it.. i dont have video card installed.. if so it worked fine when i installed and i run it for an hour.
[03:03] <zhanes> do you think that you can do type something, Aruna?
[03:03] <Aruna> do i need to reinstall ?
[03:03] <DarkwingDuck> I think the intel driver wasnt configured properly. after the HP logo you can get the grub menu by pressing Esc
[03:03] <Aruna> no only some lined displays i cant read anything or type.
[03:04] <DarkwingDuck> Then you can pick the Safe Mode
[03:04] <Aruna> ok
[03:04] <Aruna> let me try with Esc
[03:04] <DarkwingDuck> Between the HP logo and before the Kubuntu Boot screen
[03:04] <DarkwingDuck> it *should* bring it up
[03:04] <zhanes> Aruna, listen DakwingDuck, try his opinion
[03:05] <Aruna> when i pressed escape it displays some text and goes back to blank screen
[03:06] <DarkwingDuck> press down once and press enter
[03:06] <DarkwingDuck> after a bit *hopefully* it goes to a blue screen with a texted based menu
[03:06] <Aruna> Got  it!
[03:07] <Aruna> it is displaying Welcome to my laptop
[03:07] <Aruna> Kubuntu screen
[03:07] <DarkwingDuck> really.
[03:07] <DarkwingDuck> :D
[03:07] <Aruna> yes :)
[03:07] <Aruna> what can i do now ?
[03:08] <DarkwingDuck> Okay, you will need to fix GRUB so that it works
[03:08] <Aruna> i go to GNome or KED ?
[03:08] <Aruna> KED ?
[03:08] <Aruna> KDE
[03:08] <DarkwingDuck> So, you are not in recovory mode?
[03:08] <Aruna> it says in KDE as KED (previous)
[03:08] <Aruna> yes :
[03:09] <Aruna> i thing i am in main KDE mode.
[03:09] <zhanes> its resolution and refresh dark
[03:09] <zhanes> needs to reconfigure xorg.conf
[03:09] <DarkwingDuck> *nods*
[03:09] <Aruna> it displays in KDE mode.. i login now ?
[03:09] <DarkwingDuck> Login and open a terminal
[03:10] <Aruna> ook
[03:11] <zhanes> Aruna, can you acess system configuration?
[03:11] <Aruna> i am in konsole
[03:11] <DarkwingDuck> sudo dpkg-reconfigure xserver-xorg
[03:12] <mountslashyourmo> Hi! I was going to be installing kubuntu later tonight and was wondering if there was any downside to instlling the 64bit version,i remeber that flash? had seom problems a few year ago.
[03:12] <Aruna> i typed 'sudo dpkg-reconfigure xserver-xorg' command
[03:12] <Aruna> nothing happend
[03:12] <Aruna> it displays back the command prompt
[03:13] <Aruna> it means all set ? !!
[03:13] <DarkwingDuck> Aruna: how did you install kubuntu? did you have ubuntu istalled first then installed kubuntu via CD?
[03:13] <zhanes> i think that be LCD display configuration
[03:13] <Aruna> DarkwingDuck: first i installed  Ubuntu throught ISO dowlnoad and bunt it..
[03:13] <DarkwingDuck> zhanes: ill brb... see if u can help?
[03:14] <zhanes> maybe cant autodetect your deviues
[03:14] <Aruna> then i run command to install Kubuntu-desktop
[03:14] <zhanes> alright dark
[03:14] <DarkwingDuck> Kids :/
[03:14] <zhanes> not problem aruna
[03:14] <zhanes> kubuntu is great
[03:14] <mountslashurmom> So have all the kinks been worked out with the 64 bit version of kubuntu?
[03:14] <Aruna> is it all set now ? or i need to check video card ?
[03:15] <zhanes> can you acess system configuration in start menu?
[03:16] <Aruna> System Setting ?
[03:17] <zhanes> no, forget it
[03:17] <Aruna> or should i change to ubuntu
[03:17] <zhanes> no
[03:17] <zhanes> wait for a moment
[03:18] <Aruna> ook.. i be back....
[03:18] <zhanes> i prefer kuuntu than ubuntu
[03:19] <zhanes> are your console opened?
[03:20] <zhanes> type in console sudo apt-get --install xserver-xorg-video-intel
[03:21] <Aruna> ues
[03:21] <Aruna> ok
[03:21] <Aruna> i wil type now
[03:21] <Aruna> but intenet is not connected in my ubuntu !
[03:22] <zhanes> oh god, lol
[03:22] <Aruna> ok ok
[03:22] <Aruna> wait..
[03:22] <zhanes> can you connect in internet?
[03:22] <Aruna> let me move the intenet to the ubuntu....
[03:22] <Aruna> yes sir.
[03:22] <sparrowg> get source and compile
[03:23] <Aruna> this 'sudo apt-get --install xserver-xorg-video-intel'  will directly install the softwrew right ?
[03:23] <zhanes> so before type sudo apt-get --update
[03:23] <zhanes> you are right!
[03:23] <Aruna> ook
[03:23] <Aruna> let me connect througth Ubuntu.
[03:24] <zhanes> but before update the packages with apt-get --update
[03:26] <zhanes> and so?
[03:30] <zhanes> are you here?
[03:33] <DarkwingDuck> Okay, what did I miss?
[03:38] <zhanes> nothing
[03:38] <DarkwingDuck> :)
[03:38] <zhanes> Aruna missed
[03:38] <DarkwingDuck> if needed ping me
[03:38] <whatchasay> !ops
[03:39] <zhanes> Call him
[03:39] <maco> whatchasay: what?
[03:39] <whatchasay> ban me
[03:39]  * DarkwingDuck raises an eyebrow
[03:39] <maco> oops
[03:39] <DarkwingDuck> ROFL
[03:39] <maco> meh double-banned
[03:40] <zhanes> Drak, why whatchasay was banned?
[03:40] <DarkwingDuck> [19:39:35] <whatchasay> ban me
[03:41] <zhanes> why reason he want it?
[03:41] <zhanes> trouble to disconnect?
[03:45] <maco> zhanes: he's going around to bunches of channels doing that
[03:45] <maco> just being a troll
[03:45] <zhanes> what?
[03:45] <maco> he'd just keep calling ops until it happened
[03:45] <zhanes> just for fun?
[03:45] <maco> yes
[03:46] <zhanes> lol, madman
[03:46] <zhanes> he is mad
[03:47] <Aruna> sorry i got work :(
[03:48] <Aruna> i am back
[03:48] <zhanes> do you can it?
[03:48] <Aruna> let me connect to ubuntu.. give me a minute...
[03:50] <Aruna_> i am back :)
[03:50] <zhanes> works fine?
[03:51] <Aruna_> no no wait lol i need to enter the comand :P
[03:51] <zhanes> lol, not problem
[03:51] <zhanes> to you remmember
[03:51] <zhanes> sudo apt-get --update
[03:51] <zhanes> pt-get --install xserver-xorg-video-intel
[03:52] <zhanes> then sudo dpkg-reconfigure xserver-xorg
[03:53] <zhanes> sudo apt-get --install xserver-xorg-video-intel
[03:54] <Aruna_> sudo apt-get --update?
[03:54] <zhanes> yes, it first
[03:54] <Aruna_> command line option --update is not understood
[03:55] <zhanes> oh, just sudo apt-get update
[03:55] <Aruna_> sorry i am very new to ubuntu :(
[03:55] <zhanes> forgive me, ma bad
[03:55] <Aruna_> ok done..
[03:55] <zhanes> sudo apt-get --install xserver-xorg-video-intel
[03:56] <Fanfare> sudo apt-get install xserver-xorg-video-intel
[03:56] <zhanes> thanx fanfare
[03:56] <Aruna_> alredy installed no longer required
[03:56] <Aruna_> ya i removed -- lol
[03:56] <zhanes> well
[03:56] <zhanes> sudo dpkg-reconfigure xserver-xorg
[03:57] <Aruna_> done.. no message displayed.
[03:57] <zhanes> well, reboot your system
[03:57] <Aruna_> God save me now ....
[03:58] <zhanes> lets see if works normal
[03:58] <Fanfare> or logout and restart X should work too
[03:58] <zhanes> lol
[03:58] <zhanes> yeah sure
[03:58] <Fanfare> we r not on Win...
[03:58] <zhanes> I know
[03:58] <Aruna_> noooo.. problem is i cant boot again.. let me shoutdown and reboot.
[03:58] <zhanes> but he had problems in boot
[03:59] <Aruna_> ok i be back... :)
[03:59] <zhanes> maybe need to test completly
[03:59] <zhanes> worked fine?
[03:59] <Fanfare> ah, ok, didnt know about boot prob.
[04:02] <zhanes> fanfare i think that problem is xorg configuration
[04:02] <zhanes> maybe refresh rate
[04:03] <Fanfare> what exactly is the prob?
[04:03] <zhanes> i duno, display go to blank screen in X screen
[04:04] <zhanes> after kubuntu splash screen
[04:04] <zhanes> this is Aruna description
[04:04] <Fanfare> ok, so no boot prob, but an X prob...
[04:05] <zhanes> yes
[04:05] <Fanfare> did he check Xorg.log?
[04:05] <zhanes> but, when boot calls X
[04:05] <Aruna_> :( Again going  to blank screen
[04:05] <zhanes> well, fanfare Ctrl + Alt + F3 stop KDM?
[04:06] <Aruna_> now again i tried Esc when kubuntu splash screen
[04:06] <zhanes> yes, try to enter as root
[04:06] <zhanes> in option
[04:06] <Aruna_> but what exactly the problem :(
[04:06] <Aruna_> problem with video Card ?
[04:07] <zhanes> i think that could be refresh rate
[04:07] <zhanes> not video card
[04:07] <Aruna_> then when i press Escape how it start working ?
[04:07] <Aruna_> hmmmm
[04:07] <zhanes> well should be apear some options
[04:07] <Aruna_> can i chaange to Ubuntu and try ?
[04:07] <zhanes> so choose login as root
[04:07] <Fanfare> zhanes: <ctrl>+<alt>+<Fx> changes to playn console ( 1 <= x =>6 )
[04:08] <zhanes> yes, but in diferent level, dont?
[04:08] <zhanes> in F3 run kdm?
[04:08] <Aruna> i will logout and try to logiin as Ubuntu and then try to reboot.. is it ok ?
[04:08] <Fanfare> zhanes: no, only dif is deleting screen on F1
[04:09] <zhanes> hmmmm
[04:09] <zhanes> well the solution is service stop, ah?
[04:09] <Fanfare> is that an installed system or live CD?
[04:09] <zhanes> i think live cd
[04:09] <zhanes> ask him
[04:09] <Aruna> mine ?
[04:10] <Fanfare> yes
[04:10] <Aruna> i downloaded the iso file and installed the os completely.
[04:10] <Aruna> in my laptop i have only Ubuntu.
[04:10] <zhanes> fanfare, karmic version
[04:10] <Fanfare> installed ubuntus usually have 6 consoles and KDM running on 7th
[04:11] <zhanes> so, why console 1 show blank screen too?
[04:11] <Aruna> do i need to reinstall the os again ?
[04:12] <zhanes> aruna, try it:
[04:12] <zhanes> reboot your system
[04:12] <Aruna> reboot with my CD ?
[04:12] <Aruna> and reinstall the os again ?
[04:12] <zhanes> when apeared blank screen type Ctrl + Alt + F3
[04:13] <Fanfare> Aruna: boot fromm HD
[04:13] <Aruna> oook
[04:13] <Fanfare> then inspect logs
[04:13] <Aruna> i dont see logs
[04:13] <Fanfare> less /var/log/Xorg.0.log or so
[04:13] <zhanes> what can do you see?
[04:13] <Aruna> Fanfare: oonce the Kubuntu logo dislays.. i see blank screen
[04:14] <Fanfare> ok, that means X doesnt start and the reason should be in that logfile
[04:14] <zhanes> type together Ctrl + Alt + F3
[04:15] <Aruna> i am in kubuntu now can i check the log now ?
[04:15] <Fanfare> if u have a blank screen press <ctrl>+<alt>+<fx> with x 1 - 6
[04:15] <Fanfare> sure, are u in live cd?
[04:15] <Fanfare> mount the harddrive and check that file in the harddrive
[04:15] <zhanes> do you typed?
[04:16] <Fanfare> ?
[04:17] <Aruna> i am booted in hd
[04:17] <zhanes> blank scren?
[04:17] <zhanes> blank screen?
[04:17] <Aruna> when i was in kubuntu logo i pressed Escape
[04:17] <Aruna> so i can get login screen.
[04:18] <Aruna> i am in booted in HD
[04:18] <zhanes> have option to safe mode?
[04:18] <Aruna> no :(
[04:18] <Aruna> i am in normal mode.
[04:18] <Aruna> which log i need to check ?
[04:18] <zhanes> have option to login as root?
[04:19] <Aruna> no when the kubuntu logo displays i pressed Escape it displayed the login screen of KDE
[04:19] <Aruna> once i login i enters to desktop
[04:19] <zhanes> alright
[04:19] <zhanes> open shell
[04:19] <Aruna> yes
[04:20] <zhanes> have you mc installed?
[04:20] <Aruna> no
[04:20] <zhanes> sudo apt-get install mc
[04:20] <Aruna> ook :)
[04:20] <Fanfare> i must be missing something... u are now in normal KDE? from HD?
[04:20] <zhanes> yes he are
[04:21] <Aruna> i am in Kubuntu booted in harddisk
[04:21] <Fanfare> so the blank screen is where the login screen should appear?
[04:22] <Aruna> once it boots and displays hp logo then kubuntu logo i am geting blankscreen
[04:22] <zhanes> Fanfare, it possible to be conflict bettween gdm and kdm?
[04:22] <Aruna> i dong get login
[04:23] <Aruna> mc installed.
[04:23] <zhanes> sudo apt-get install xinit
[04:23] <zhanes> to no doubt
[04:24] <Aruna> xinit is already the newest version.
[04:24] <zhanes> alright so type 'sudo mcedit /etc/X11/xorg.conf'
[04:25] <Fanfare> kubuntus shouldnt have xorg.conf... u want to create one?
[04:25] <Aruna> no lines
[04:25] <Aruna> may be new file.
[04:26] <zhanes> alright, Fanfare, do you think that is a good idea to create one?
[04:26] <Fanfare> did u have gdm installed before?
[04:27] <Fanfare> zhanes: no, if X runs fine now.
[04:27] <zhanes> but x cant run fine
[04:27] <Fanfare> i thought he is in KDE now?
[04:27] <zhanes> in his system
[04:27] <Aruna> yes
[04:27] <Aruna> i am in kubuntu
[04:27] <zhanes> yes, gdm before, now kdm
[04:27] <Aruna> i first have ubuntu
[04:28] <Fanfare> Aruna: are u in a console now or in a KDE session?
[04:28] <Aruna> konsole
[04:28] <Aruna> kde
[04:28] <zhanes> he does 'kubunted' Ubuntu
[04:28] <Fanfare> ok, so KDE is up and running? from ur HD
[04:29] <Aruna> no..  that the oone is displaying   the black screen
[04:29] <Fanfare> id suggest something like sudo apt-get purge gdm* and reinstall KDM...
[04:29] <Aruna> i didnt tried the ubuntu.
[04:29] <Aruna> hmmm
[04:30] <Aruna> once i login into ubuntu i run the console command to install kubuntu-desktop
[04:30] <Aruna> after than i login into kubuntu
[04:30] <Aruna> now when kubuntu boots i get blank screen.
[04:31] <Aruna> ok i will do  'sudo apt-get purge gdm*'
[04:31] <Fanfare> anyhow try to paste her the logfile of X /var/log/Xorg.0.log
[04:32] <zhanes> its prohibited to past logs here
[04:32] <Fanfare> zhanes: use pastebin
[04:32] <zhanes> say to him past in particular window
[04:32] <Aruna> (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
[04:32] <Aruna> (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
[04:32] <Fanfare> !pastebin
[04:32] <Aruna> (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
[04:32] <FloodBotK1> Aruna: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[04:32] <zhanes> what i said dude
[04:33] <Fanfare> !pastebin
[04:33] <zhanes> bad resolution
[04:34] <zhanes> what do you think if us edit only display screen in xorg.conf?
[04:34] <Aruna> http://paste.ubuntu.com/333627/
[04:34] <Fanfare> u tryed reconfigure xorg-server right?
[04:34] <jacquesdupontd> hi
[04:34] <jacquesdupontd> i have 2 exact same 320 gb sata disk on a laptop so 2.5 and i would like them to work in raid, but then i would like that this raid harddrive is able to handle a multiboot with windows seven and ubuntu is it possible ?
[04:35] <Aruna> yes
[04:35] <Fanfare> is that the whole log?
[04:35] <Aruna> no just half
[04:35] <zhanes> better edit xorg.conf. dont?
[04:36] <Aruna> you want whole one ?
[04:36] <Fanfare> xorg finds lots of  resolutions...
[04:36] <Fanfare> Aruna: sure
[04:37] <Aruna> http://paste.ubuntu.com/333628/
[04:38] <zhanes> lets put probed modes to xorg.conf, what do you think about it Fanfare?
[04:39] <zhanes> in section screen and section monitor
[04:39] <Fanfare> that would be a workaround...
[04:39] <zhanes> yeah
[04:39] <Fanfare> but actually i dont see X not starting from log
[04:40] <Fanfare> no hard EError
[04:40] <zhanes> yeah
[04:40] <zhanes> but display screen error
[04:40] <zhanes> unsupported resolutions for LCD display
[04:40] <Fanfare> pstree -p | grep X
[04:41] <Aruna> Fanfare:   |-kdm(896)-+-Xorg(1001)
[04:41] <Fanfare> So X is up and running!
[04:42] <zhanes> yes
[04:42] <zhanes> but video card and LCd display are not configured in xorg.conf
[04:42] <zhanes> lets creat a xorg.conf with correctly display
[04:43] <zhanes> inst a good idea?
[04:43] <Fanfare> hm, cant be set live with xrandr?
[04:43] <Aruna> both of your language are greek and latin to me lol
[04:43] <zhanes> lol
[04:44] <zhanes> aruna, are you male or female?
[04:44] <Fanfare> ok, with xrandr one can change resolutions on the fly...
[04:44] <Aruna> female
[04:44] <Fanfare> but i dont know that tool too much...
[04:44] <zhanes> oh, so sorry by him or his
[04:44] <Aruna> lol
[04:45] <zhanes> lets creat with gedit, better than mcedit
[04:45] <Aruna> hmmmm
[04:45] <Fanfare> zhanes: are u familiar with xorg.conf? then that might be quicker...
[04:45] <zhanes> Aruna, type in terminal sudo gedit /etc/X11/xorg.conf
[04:45] <Aruna> ook
[04:45] <zhanes> i am familiar
[04:45] <Fanfare> gedit workt in a tty?
[04:46] <zhanes> my xorg.conf is edited to me
[04:46] <Aruna> i got the editor.
[04:46] <Aruna> empty file
[04:46] <zhanes> right
[04:47] <Aruna> what to type ?
[04:49] <Fanfare> start with
[04:49] <Fanfare> Section "Monitor"
[04:49] <Fanfare>         Identifier     "Monitor0"
[04:50] <Aruna> ok
[04:50] <Fanfare> well zhanes or do u only want to change Screen section?
[04:54] <Fanfare> hm
[04:54] <Aruna> hmmm
[04:56] <zhanes> !pastebin
[04:58] <Fanfare> Aruna: remove what i sayd, make empty
[04:58] <Fanfare> then paste what zhanes pastes :-)
[04:58] <Aruna> Fanfare: ya its empty :P
[04:58] <zhanes> http://paste.ubuntu.com/333639/
[04:59] <Aruna> yes saved now
[04:59] <Aruna> i rebot the system ?
[04:59] <zhanes> yes
[04:59] <Fanfare> there are quotes missing!!!
[04:59] <Aruna> ok hope i be back :P
[05:00] <zhanes> your display is a WXGA
[05:00] <zhanes> wide LCD, isnt?
[05:00] <Fanfare> modeline syntax is not correct?
[05:00] <Fanfare> upa, didnt se that... ok
[05:01] <Fanfare> quotes are closed...
[05:01] <zhanes> i only do screen and monitor sections
[05:01] <Aruna> any changes
[05:01] <Aruna> ?
[05:02] <zhanes> worked?
[05:02] <Fanfare> nope ok, try
[05:02] <Aruna> ok i am reboting
[05:02] <Fanfare> good luck
[05:02] <Aruna> :)
[05:02] <zhanes> i put the instruction to her understandment
[05:03] <Fanfare> hey zhanes where are u from?
[05:03] <zhanes> kubuntu equipe from Brazil
[05:04] <Fanfare> so, how is FOSS in Br? is it widespread?
[05:04] <Fanfare> or are most ppl using M$?
[05:08] <zhanes> a lot
[05:08] <zhanes> i have spreding many distributions
[05:08] <cory> Hello
[05:09] <cory_> I need help with detecting my monitor
[05:09] <zhanes> only dell in brazil dont spread linux
[05:09] <cory_> Can anyone help me detect my monitor
[05:09] <zhanes> for a strange reasons
[05:10] <zhanes> all dell machines in Brazil comes to windows only, while in europe, for example, is optional
[05:10] <Aruna> :( now escape in kubuntu logo is also not working
[05:10] <Fanfare> dell switcht to only win in europe too afaik
[05:10] <zhanes> its too bad
[05:11] <Aruna> better do all from scratch...
[05:11] <Aruna> reinstall ubuntu.
[05:11] <Fanfare> cory_: did u check /var/log/Xorg.0.log?
[05:11] <zhanes> toshiba here sold most linux OS than Windows
[05:11] <zhanes> both are optionally
[05:12] <wizardslovak> does anyne uses modrapi/?
[05:14] <cory_> fanfare: I'm using Kubuntu 9.10, but no I did not
[05:14] <cory_> What happened was I installed Kubuntu under a different monitor. The settings are for that monitor
[05:15] <cory_> I don't know how to change them to new monitor
[05:16] <Aruna> Fanfare,zhanes  where are you from ?
[05:17] <Aruna> When install can i give entier disk ?
[05:17] <Aruna> i have 250GB
[05:18] <Aruna> in prepare disk space... can i give Erase and use the entire disk ?
[05:18] <Fanfare> folks i got to go. bb
[05:19] <Aruna> bye :)
[05:19] <Aruna> anyone tell me is it good to give entier Disk ?
[05:20] <Aruna> Anyone help me ?
[05:28] <darkdelusions> What in the .kde folder would make my laptops keyboard stop working
[05:29] <darkdelusions> I have to hold the keydown to get it to register
[05:29] <darkdelusions> i know its a setting somewhere in the .kde folder because I renamed it and it fixed it
[05:37] <darkdelusions> sigh this is annoying
[05:52] <darkdelusions> Anyone have any idea on why when I try to upload say a small mov file to say Face book or you tube it makes my internet connection drop
[06:01] <TeLLuS> darkdelusions: bad connection?
[06:02] <darkdelusions> Tellus nope
[06:02] <darkdelusions> TeLLuS:  Full Signal on the wireless
[06:02] <darkdelusions> it causes it to drop
[06:02] <darkdelusions> and I can get it back up unless i reboot
[06:03] <TeLLuS> darkdelusions: And without wireless?
[06:03] <darkdelusions> You know I havent tired it
[06:04] <darkdelusions> brb
[06:08] <bazyli> hi all
[06:09] <darkdelusions_> it does the same thing hardwired
[06:09] <darkdelusions_> i am thinkin it has to be the drivers its using for my nic
[06:10] <darkdelusions_> I remember having this issue in 9.04 as well
[06:10] <darkdelusions_> can remember if i ever fixed it
[06:13] <darkdelusion-> odd
[06:20] <bazyli> i have a problem, when i want install kubuntu 9 the dialogs box desapear, and osd monitor says recomended mode 1440x900 , with kubuntu 8 i dont have such a problem
[06:26] <bazyli> Je tu jaki polak?
[06:39] <darkdelusions_> odd
[06:39] <darkdelusions_> I set a static ip to see if it would fix it but it doesnt
[06:39] <darkdelusions_> and when I upload my ping spikes to 1400
[07:14] <wizardslovak> so this is weird
[07:16] <wizardslovak>  i updated firefox, i installed restricted formats, i even updated flash and still youtube doesnt work
[07:22] <FloodBotK1> NOTICE - The above was an exploit attempt that may have disconnected some users. Please ignore it, or type « /msg ubottu exploit » for more information.
[07:25] <benjamin_> hi, anyone an idea whats wrong when knetworkmanager crashes on startup?
[07:26] <benjamin_> kubuntu 9.1
[08:01] <ct529> hi!
[08:01] <ct529> Does anyone know how do to download the lyrics of songs in the new Amarok?
[08:13] <ghostcube> ct529: ask in amarok
[08:15] <ct529> ghostcube: thanks
[08:15] <ghostcube> np
[08:15] <NotJa> lol
[08:40] <tehk> Anyone know what this compiz like viewport switcher preview thing is called for kwin, and how I would go about getting it? http://imgur.com/29gY5.jpg
[08:53] <aomegax> hi
[08:58] <aomegax> how can I do to install tellico 2.1 if in repository there is version 1.3?
[09:00] <aomegax> I have download 2.1-1.deb but I have a problem of dependency with libqt4-dbus...it requires versione 4:4.5.3 and I have installed 4.5.2
[09:16] <Briareos1> how can i make my screen resolution persistent
[09:35] <aomegax> how can I do version downgrade of a packet?
[09:37] <Briareos1> why do you want to do that, aomegax ?
[09:37] <aomegax> I have installed libqt4-dbus_4.5.3really4.5.2-0ubuntu1_i386.deb
[09:38] <aomegax> but I had to install libqt4-dbus_4.5.3-4_i386.deb
[09:38] <Briareos1> you may be able to find the old version in /var/cache/apt/archives/ - then you can "sudo dpkg -i DEBFILE.deb"
[09:38] <aomegax> thanks
[09:39] <Briareos1> does anyone know how to make the desired screen resolution persistent in kde 4.whateva
[09:40] <Briareos1> and when will (no offense) kde 4 be a competetion to 3.5 ...
[09:44] <||arifaX> how can I savely kill and restart plasma?
[09:45] <yaps> hi, seems that the update of yesterday killed my system... as far as i found out it seems thaat yesterdays gdm update killed my kdm. i use kubuntu but i installed xfce as second DE, this is why i have gdm. how can this be ficed?
[09:45] <yaps> fixed
[09:48] <yaps> .
[09:53] <yaps> has anybody encounterd problems with kdm or gdm after the update, too?
[09:57] <ubsafder> yes i can not login that way
[09:58] <ubsafder> looks like gdm gets in a loop and never logs in since i upgraded
[10:01] <yaps> ubsafder: so you can not use your system too?
[10:02] <ubsafder> well i found that at the loging screen if i click consol logging it gets in
[10:03] <ubsafder> but then i can not type numbers without kde crashing
[10:04] <yaps> ubsafder: i even can ont type aything :(
[10:04] <yaps> i even read a post about this problem, but it's in german
[10:05] <ubsafder> on my keyboards it requires shift to type number . so i found i had to disable sticky keys . so now with all that it kind of works  but my wife refuse to even look at it
[10:05] <yaps> http://www.ubuntu-forum.de/artikel/47993/gdm-update-hat-kdm-geschrottet.html
[10:06] <yaps> ubsafder: so your prblem is fixed?
[10:07] <yaps> ubsafder: when i want to log on, it gives me the options to go with terminal login, to fix my configuration or something else (can't look it up, i am using other OS on same machine)
[10:07] <yaps> so i cant log on... nothing i can do at all
[10:07] <yaps> seems the only way is to boot live cd and chroot
[10:07] <yaps> :/
[10:08] <ubsafder> yes kind of i need to click on console loging and pray it won't reboot . it destroyed 2 usn key that were not unmounted before my system crashed
[10:09] <yaps> is there a way to report this issue... seems to be "common"
[10:10] <blackarrow> hi, I'm trying to build mutrace on kubuntu (http://0pointer.de/blog/projects/mutrace.html)
[10:10] <blackarrow> unfortunately, it has a linking problem against libbfd (binutils-dev)... /usr/bin/ld: /usr/lib/libbfd.a(format.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC
[10:11] <blackarrow> can anyone suggest a way around this?
[10:25] <blackarrow> ok, managed to build and install my own libbfd -fPIC :)
[10:30] <amator_k> hi all !
[10:31] <amator_k> annyone know how should I install SMILE on Kubuntu804/64bit??? or WebKit (as dependencie for it)??
[10:37] <icyx> Hi
[10:37] <amator_k> ello
[10:37] <icyx> Does anyone know how to make sure users can't mount USBsticks/hardware anymore?
[10:37] <icyx> I thought it might be the plugdev group, but that didn't work
[10:39] <icyx> The reason is that I'm creating a live cd with a controlled environment. Everything is ready, except that mounting external devices is still allowed for normal users
[11:13] <smeagal> infp
[11:13] <smeagal> info
[11:16] <bourke> hi, does anyone use the UML program umbrello?
[11:18] <Mamarok> bourke: no, not really, but what question do you have?
[11:19] <bourke> Mamarok: its crashing constantly on me and seems really unstable. Im wondering whats the best strategy for me, i.e. recompile a slightly older version, or..?
[11:20] <Mamarok> no, older versions are not really better, on the contrary
[11:20] <bourke> may be more stable though
[11:20] <Mamarok> not at all, that wouldn't make any sense
[11:20] <Mamarok> bourke: what exact version are you talking about?
[11:21] <bourke> I could compile the latest nightly build but it seems to have been integrated into kdesdk which depends on a host of other things
[11:21] <bourke> Mamarok: my version from the repositories is 2.2.2
[11:21] <Mamarok> bourke: well, you use a completely outdate version then, mine is 2.3.4
[11:22] <bourke> Mamarok: Ok. how can I update?
[11:22] <Mamarok> bourke: you use Karmic?
[11:22] <bourke> jaunty
[11:22] <Mamarok> that's the explanation
[11:22] <bourke> this is my work machine so I cant risk updating right now in case it breaks things
[11:22] <Mamarok> 2.3.4 is in KDE 4.3.4, which is in the Karmic updates PPA
[11:23] <FIN__Master> Could someone help me with patching a few xorg files with .patch files and building xorg or making a package with the files?
[11:23] <Mamarok> bourke: and I guess you would need a newer KDE version aynway, which one do you have?
[11:23] <Mamarok> anyway*
[11:23] <bourke> Mamarok: 4.2.2
[11:24] <Mamarok> bourke: I stringly suggest you upgrade, KDE 4.2.2 is quite old and outdated, there have been several bugfixes in the 4.2.x series since and KDE 4.3 is overall much more stable and usable
[11:24] <Mamarok> strongly*, sorry
[11:24] <ronbs> #marmotte
[11:25] <Mamarok> ronbs: please don't do that
[11:27] <LimCore> hi. There was some news about initiative to reorganize kubuntu AQ or something... anyone has the URL?
[11:27] <LimCore> because now kubuntu appears super buggy
[11:29] <bourke> Mamarok: I agree updating is the best option.  It's just a risky process just to get one program working.. I dont suppose you know any other good alternatives to umbrello?
[11:29] <Fleck> is it true, that when working as root - system ir more responsible on heavy loads? If as user i load my system at 100% i can't do anything..., but i still can login as root trough ssh and do things...
[11:29] <Mamarok> bourke: not in Free Software, that's the only UML modeller I know
[11:30] <Fleck> i even cannot kill process that uses all resources as user
[11:30] <bourke> Mamarok: Ok, thanks anyway
[11:31] <mozillo> hello world
[11:33] <mozillo> AAARRRRRRRRRGGGGGGG
[11:33] <mozillo> salut
[11:43] <ahox> #join /f95
[11:44] <ahox> sry
[11:44] <RiotingPacfisit> anybody got any ideas why su juan startx fails to do anything in my rc.local, it should work but it silently fails (well i say silently i've only looked at xorg.log not suer where else to look)
[11:44] <RiotingPacfisit> ahox: np it's /join #f95 or /j f95 if your lazy
[11:50] <FloodBotK2> !netsplit
[12:00] <smellynoser> Hey
[12:01] <smellynoser> I want to setup command-not-found.py to do: if(command == 'name_of_a_server') then SSH into that server
[12:01] <smellynoser> How can I do that?
[12:17] <|moe|> helas! how or where do i disable ipv6 for all my network interfaces?
[12:23] <smellynoser> I want to setup command-not-found.py to do: if(command == 'name_of_a_server') then SSH into that server
[12:23] <smellynoser> How can I do that?
[12:25] <Daviey> smellynoser: you could just set an alias in your ~/.bash_profile or similar ?
[12:52] <BLIXNA_BLEACH> anybody know where i can get a QUALITY copy of offsec101?
[12:52] <BLIXNA_BLEACH> as a torrent preferably..........
[13:03] <RiotingPacifist`> kdostartupconfig4 fails when i startx as root from rc.local but runs fine when i startx from root after logging in, any ideas?
[13:12] <andriyko> hello. I have a great problem. Recently installed Kubuntu 9.10 and after few days(I have applied system proposed bug fixes) kde crashed. Now there are no window borders, keyboard doesn't work. Total crach!!! Please help to debug problem!!!
[13:15] <andriyko> anybody
[13:15] <andriyko> ?
[13:47] <gerryxiao> kdm said  not found /dev/fb0 when startup ,and console can't work, what's wrong
[14:12] <rasko> hie
[14:12] <hugo> hy
[14:19] <alberto_> Hola
[14:19] <alberto_> A todos
[14:20] <alberto_> ¿Alguien sabe cómo configurar Jack server?
[14:21] <Pici> !es | alberto_
[14:21] <takis_> hey
[14:21] <alberto_> Hey
[14:22] <alberto_> how are you?
[14:22] <takis_> i am looking for an light IDE for KDE
[14:22] <takis_> like geany in gnome
[14:22] <takis_> i'm fine
[14:22] <takis_> u?:)
[14:45] <Ksquared> ok
[14:45] <giordanoc> kk
[14:45] <Ksquared> there we go =D
[14:45] <giordanoc> YAY!
[14:45] <Ksquared> okey day then
[14:45] <Ksquared> so now we can doo this daily =D
[14:46] <giordanoc> yes lol
[14:55] <Ksquared> ok we're just going to have to use this
[14:57] <BluesKaj> howdy folks
[14:58] <Ksquared> hello
[14:58] <bazhang> hi
[15:00] <jstewart> So who else is having problems with the Net this morning? Google is really troubled (web pages not loading, etc.)
[15:01] <Ksquared> I havn't had a problem with it, actually...
[15:01] <ubuntu> !it
[15:02] <jstewart> Ksquared ...where are you located... in general...?
[15:02] <giordanoc> hello world
[15:02] <Ksquared> how general?
[15:02] <jstewart> country
[15:02] <Ksquared> US
[15:03] <jstewart> hmmm.... well I'm up here in the Great White North (Canada) and we (myself and some other friends) are having problems
[15:05] <genii> jstewart: It seems a bit laggy from Toronto, but all pages load
[15:05] <Ksquared> hmm...I had this problem myself at one point...I ended up just turning the computer off and leaving it for another day xD
[15:05] <Ksquared> shut up craig
[15:06] <giordanoc> no you kain
[15:06] <Tm_T> Ksquared: behave
[15:14] <finswimmer> Hello, my printer is working in KDE, Openoffice but not in Firefox. What could be wrong? As far as I see I do not find an option for Firefox?
[15:19] <mostafa_> hey there how can I change the permissions of /var/www
[15:21] <genii> mostafa_: You already changed them: "<mostafa_> I type this command sudo chmod 777 -R /var/www"
[15:21] <mostafa_> genii: but nothing happends bro
[15:21] <mostafa_> :(
[15:21] <genii> !nothing
[15:22] <genii> mostafa_: If it did not give an error, then the command successfully completed
[15:22] <mostafa_> genii: yeah the command don't show anything and all is done well
[15:23] <mostafa_> genii: but when I check it out about the
[15:23] <mostafa_> genii: permissions nothing happends
[15:23] <tugrick> есть кто нибудь и зРОссии
[15:23] <mostafa_> genii: and all of them are the same
[15:23] <tugrick> ?
[15:24] <bazhang> !ru | tugrick
[15:24] <Pici> !ru | tugrick
[15:26] <wilsby29> Пожалуйста посетите
[15:26] <aldin> hi, how do i turn of spell check in kde for knotes and kmail
[15:27] <wilsby29> you click on получения under помощи
[15:29] <genii> mostafa_: If ls -l in there shows rwxrwxrwx as the permissions, they have been set to 777
[15:30] <mostafa_> genii: thanks dude I should just press F5 to refresh the page, hehe , then all thing are good
[15:30] <mostafa_> ;)
[15:35] <egoflux> anyone know how i change the mouse sensitivity?
[15:36] <egoflux> nevermind
[15:39] <guest_> howto stop "kwallet" from asking for a password ?
[15:40] <Tm_T> guest_: you don't like to use wallet at all, or you just dont want it to ask password?
[15:40] <yoyo> Is quassel>Konversation?
[15:41] <Tm_T> yoyo: two different apps, its up to you which one you like more
[15:41] <guest_> Tm_T either   <shrugs>
[15:41] <Tm_T> guest_: latter is accomplished by changing your wallet password to be empty
[15:42] <yoyo> Just wondering.  I knew they were different :)
[15:42] <guest_> Tm_T ok.   how do i reset it if i don't know what it is set to now ?
[15:42] <Tm_T> guest_: unfortunately I don't know
[15:42] <guest_> ;/
[15:43] <Tm_T> guest_: living without wallet is trickier and not without risks, as without wallet your passwords are stored in plaintext
[15:43] <yoyo> unless you go with keepassx or similar..
[15:58] <BluesKaj> I tried the kubuntu & ubuntu 9.10 live cds on wife's pc but the kernel modules don't have the right driver for the Nvidia GeForce 6150S E nForce 430. Been searching the forums , but all I see is complaints about gaming . I can't even get into the splash screen . Just get the vertical striped rainbow colours
[16:01] <rstob911> BluesKaj: is not there a vesa mode option on boot
[16:02] <BluesKaj> rstob911, dunno , din't notice
[16:02] <BluesKaj> this is a live cd
[16:02] <rstob911> im not sure but i think there is on the live cd
[16:03] <rstob911> i know there is a safe mode option not sure if that boots the vesa driver or not
[16:05] <RiotingPacfisit> http://pastebin.ca/1700274, fails when i launch it under su juan -c <script> during bootup, but a simialr script for root runs fine, 1) where would errors go 2) does anybody have any ideas as to what im doing wrong?
[16:06] <apo> hi. has anone experienced a bug in kdesudo on lucid yet? i'm not able to press OK anymore. It just hangs at this point. i can still cancel.
[16:06] <apo> same happens with passwords entered in okular pdf files
[16:06] <apo> using sudo works
[16:07] <rstob911> RiotingPacfisit: try instead of hushlogin try silentlogin
[16:08] <RiotingPacfisit> rstob911: how would i do that? add a line silentlogin="TRUE"?
[16:08] <antares> hi everyone...how can i update kde?
[16:09] <antares> which repo I need?
[16:09] <rstob911> RiotingPacfisit: where is this file comming from
[16:10] <BluesKaj> antares, look up waaay up
[16:10] <antares> sorry?
[16:10] <RiotingPacfisit> rstob911: Its a custom file i wrote, it's basically what export shows from a login (startx works from a login)
[16:10] <BluesKaj> look in the room message header
[16:11] <antares> i need repository address to update kde
[16:11] <antares> ah ok
[16:12] <rstob911> i see RiotingPacfisit i really dont know what you need to fix it all i know is you dont use hush but silent instead
[16:13] <RiotingPacfisit> rstob911: thx, brb im slowly crashing
[16:16] <bradpitt> !resetpanels > bradpitt
[16:18] <gorgonizer_> hello!  Is there any news of a KDE 4.4 Beta 1 repository for Karmic?  (Apologies if this has been covered previously)
[16:19] <Tm_T> gorgonizer_: no, not yet, I'm sure it will be in kubuntu.org when one is available (:
[16:21] <gorgonizer_> Tm_T: cheers for that, can't wait to see improved 4.4 is to 4.3 (even though I am extremely impressed with 4.3)
[16:21] <Tm_T> gorgonizer_: there's improvements for sure (:
[16:30] <Georgesuper3> hello
[16:31] <Georgesuper3> HELLO!
[16:31] <Georgesuper3> Are you from greece?
[16:32] <Georgesuper3> I am from greece
[16:32] <genii> Georgesuper3: Best to just ask whatever question you have about Kubuntu, someone may answer
[16:32] <Tm_T> Georgesuper3: hi and welcome, this is official kubuntu support channel
[16:33] <Georgesuper3> And who who is from greece he can chat with me!!!!!!!
[16:33] <Georgesuper3> thank you
[16:33] <genii> !gr
[16:34] <Georgesuper3> CU!
[16:36] <byte> hi, i updated yesterday (some x files and also gdm) and now i can not log on. it complains about graphics, tells me it is running in low graphic mode and that i have to apply new settings, load my old ones or use default settings. non of them worked, so i went for the 4th option and wanted to log in with commandline. i cant even log on!!! i really need help. no i use a kubuntu live cd on my broken system.
[16:38] <byte> beside my kde i also have xfce installed, so this is the reason for gdm
[16:38] <yakuzi> anyone encountered this problem? When i try to install from the live cd, i can't see any partition/hdd, when i try with the alternate cd, same problem (doesn't matter if i choose to let it activate the sata raid drives or not, i don't see any hdd or partition) my desktop has 2 sata hdd's on it 1 250GB hdd with winXP in dual boot with kubuntu (i need a fresh install, this one is messed up) and 1  160 GB hdd (data) motherboard has nforce2
[16:38] <yakuzi>  chipset, and i have to create raid arrays on the disc (i don't need raid, but i don't have a jbod option, motherboard is one of the first with sata) it's some form of hardware raid and it worked fine with all previous versions, but not with 9.10
[16:39] <zippy> byte i have the same problem
[16:39] <zippy> workaround: restart kdm via ssh
[16:39] <byte> zippy: i know allready 4 people including you having this problem
[16:40] <Tm_T> byte: that is Karmic?
[16:40] <yakuzi> last option i'm trying now (after cd has done burning) is to boot the live cd, remove the dmraid package and try the installer again...if that doesn't work i'm clueless how to solve it, anyone has some more ideas?
[16:40] <zippy> sometimes i get the bash sometimes no keyboard at all
[16:40] <byte> Tm_T: z
[16:40] <zippy> Tm_T yes karmic
[16:40] <byte> Tm_T: yes
[16:41] <zippy> byte you can also try with escape key and be patient for a while
[16:42] <byte> zippy: i guess it is the gdm messing up. i read a forum post (posted yesterday, so pretty likely same cause) explaining how to fix it
[16:42] <byte> zippy: gonna try now
[16:42] <byte> zippy: esc doesnt help for me :(
[16:42] <byte> but it seems to be a common problem
[16:44] <byte> zippy: I can send u the link to this post, but it is written in german
[16:44] <zippy> great im german!
[16:45] <byte> zippy: the advice of the post is to chroot into your broken kubuntu from live cd, relaod the old gdm and prevent the new version from being updated again.
[16:46] <byte> zippy: do you speak german?
[16:46] <zippy> my card is a GeForce FX 5600 XT and working like charm with 3D IF it runs
[16:46] <zippy> yes
[16:47] <zippy> byte but kubuntu is not broken its a problem on start-up with the new kernel I think
[16:47] <byte> zippy: join the cannel zippyandme  ... i created it
[16:48] <CupofDice> hey guys. asked this question in #linux, but they seem busy. I am getting a self-install kit from comcast next monday, but I will have to look for my own router (bastards wanted to charge me around 150). I have been told that to set up comcast self-install kit with linux, all I do is hook it up. Is it the same for a router?
[16:50] <noaXess> hi all, what does that exactly mean.. how can i install k9copy.. k9copy: Depends: mencoder but it is not going to be installed
[16:51] <noaXess> have kde 4.3.4 installed from kubuntu-ppa
[16:51] <llutz> noaXess: mencoder needs medibuntu-repo
[16:52] <noaXess> llutz: aha.. okay..
[16:52] <noaXess> llutz: from here right? http://www.medibuntu.org/
[16:53] <llutz> yes
[16:53] <yakuzi> ok the removal of dmraid solved the not being able to choose partitions...the question now is, can i trust the install process to only work on the asked partitions? (i see both my hdd's now, with all the partitions etc)
[16:56] <noaXess> llutz: have now enabled medibuntu repo, but same error.. :(
[16:57] <noaXess> if i try install mencoder: mencoder: Depends: mplayer-nogui but it is not going to be installed
[16:57] <llutz> noaXess: sudo aptitude update; sudo aptitude -f install
[16:57] <noaXess> sudo apt-get -f install will fit it too right?
[16:58] <llutz> yes
[16:58] <noaXess> llutz: 0 packages to upgrade
[16:59] <llutz> noaXess: sudo apt-get install --reinstall k9copy
[16:59] <sysop> hi
[16:59] <llutz> noaXess: it should have satisfy the missing deps on its own...
[16:59] <noaXess> llutz: same...
[17:00] <Guest11259> I upgraded to 9.10 from 9.04 and now I have tons of video corruption. any help? any logs I should look in?
[17:00] <SeekerNL> someone any idea when k3b says it will write with 17x and then the averge speed is just 4x ? why is this?
[17:00] <yakuzi> 17x speed is the maximum speed
[17:01] <noaXess> llutz: http://paste.ubuntu.com/333943/
[17:01] <yakuzi> but is is very likely that it never comes to that speed, depending on the amount of data you are burning, and if the buffers can't follow or something, it won't burn them empty...
[17:01] <Guest11259> the top bar where the minimize close buttons is corrupt but the programs look fine. but when I click on lancelot I get a big square of gibberish instead of a menu, also I tried kvirc and it just gave me a screen of gibberish as well. but xchat works fine except for the before mentioned corruption.
[17:01] <SeekerNL> okay how come it will not burn on this maximum speed?
[17:02] <sysop2> sorry someone stole my nick.
[17:03] <llutz> noaXess: apt-cache policy mencoder
[17:03] <SeekerNL> TSSTcorp cd dvdw se-s224q  thats the burner I have, its a Samsung writemaster
[17:03] <noaXess> llutz: http://paste.ubuntu.com/333946/
[17:04] <llutz> noaXess: you havent enabled medibuntu
[17:04] <llutz> https://help.ubuntu.com/community/Medibuntu
[17:04] <yakuzi> well as far as i know, most burn programs never reach the max speed they indicate (if you choose to burn on 17x for instance, that just means it won't burn faster, it doesn't mean how fast the actual burn is going to be...
[17:04] <noaXess> llutz: it's in /etc/apt/sources.list.d/medibuntu.list
[17:05] <noaXess> deb http://packages.medibuntu.org/ karmic free non-free #Medibuntu - Ubuntu 9.10 "karmic koala"
[17:05] <SeekerNL> its strange why nero doesnt show actual burning speed then
[17:05] <noaXess> come back later
[17:05] <llutz> noaXess: done a "sudo apt-get update" after adding the repo?
[17:05] <noaXess> llutz: jep
[17:06] <SeekerNL> how do u force burner to write at maximum speed?
[17:06] <noaXess> http://paste.ubuntu.com/333948/
[17:06] <noaXess> need to gooooo
[17:06] <yakuzi> the actual burn speed has no use...the only reason why you can choose a burn speed, is to make sure you have a good burned disc (for music for instance you can choose slower burn speed to have good burn quality etc) and, some disc can't be burned on high speeds so then you also need a slower speed
[17:07] <yakuzi> and how you can force? maybe it's an option in k3b i don't know
[17:07] <SeekerNL> I know my dvd disks can be burned at 16 speed, but k3b is just getting around 4
[17:09] <SeekerNL> could it be the driver? or k3b? I also have nero on my computer
[17:09] <yakuzi> no idea about that i'm sorry
[17:10] <SeekerNL> I am ofcourse glad a dvd burner where on box does not stand that it work with linux does work, but wanna have maximum out of it to
[17:12] <SeekerNL> U know most burners come with nero but I guess they dont include nero linux
[17:13] <yakuzi> well you don't need nero if you have a well working free program like k3b do you? ;)
[17:14] <SeekerNL> Will know this answer if nero burns faster then k3b
[17:14] <SeekerNL> right now I have trial till 27-12
[17:15] <SeekerNL> but havent watched on cd of nero that I got if they include linux version
[17:16] <SeekerNL> nero says it writes with 16x but I dont believe that
[17:18] <yakuzi> well burn 2 discs with the same data, 1 with k3b and 1 with nero and time both burns, if nero is much faster then it's true, if not, it's not true and it just gives the max burn speed
[17:18] <SeekerNL> I think its not true, now nero says 17 min left
[17:19] <SeekerNL> and I burn in 13 min with k3b, but its clear thats no 16speed
[17:20] <SeekerNL> No I wonder why they sell it and it doesnt reach that speed
[17:20] <llutz> SeekerNL: marketing
[17:21] <SeekerNL> you know my burner should be able to burn 22x though I dont find empty dvds supporting 22x\
[17:21] <llutz> SeekerNL: it's hard enough to find suitable media for  errorfree 8x
[17:22] <SeekerNL> Maxell I have 110 for 16,50 (euro )
[17:23] <SeekerNL> the firework terrorists are already starting to terrorise the people
[17:24] <RiotingPacfisit> http://pastebin.ca/1700274, fails when i launch it under su juan -c <script> during bootup, but a simialr script for root runs fine, 1) where would errors go 2) does anybody have any ideas as to what im doing wrong?
[17:25] <maisukon> Where can I find neverwinter night if not provide in my repositories?
[17:25] <RiotingPacfisit> i took the advice earlier and read about hush/silent login but then i just removed the hushlogin line and it had no effect x still starts for root but not me
[17:26] <maisukon> :)
[17:27] <genii> maisukon: See the manufacturer's page: http://nwn.bioware.com/downloads/linuxclient.html
[17:29] <DeeTah> anyone know some cool RoR ide?
[17:32] <manjula> Hi.. ALl
[17:33] <yakuzi> yes ! it seems my problem with not getting to install kubuntu on my desktop is solved...i was able with remove dmraid to see my partitions and to change them etc, the install worked, my windows still works, and it seems i've a fully working kubuntu 9.10
[17:35] <manjula> i have Ubuntu 9.04 (Jaunty Jackalope). my problem is when i use VLC ( or even mplayer) sound jerks when i try to play avi files... i have w32codec installed
[17:37] <manjula> can someone help me please ?
[17:41] <jhutchins_lt> SeekerNL: The rated speed of a burner is it's _maximum_ theoretical speed.  It depends on the media quality, but few will actually burn at that speed in real life.
[17:49] <bradpitt> hi.. is it safe to add/use kubuntu backports on ubuntu?
[17:54] <SeekerNL> why not ?
[17:57] <sysop2> I upgraded to 9.10 from 9.04 and now I have tons of video corruption. any help? any logs I should look in?
[17:57] <sysop2> the top bar where the minimize close buttons is corrupt but the programs look fine. but when I click on lancelot I get a big square of gibberish instead of a menu, also I tried kvirc and it just gave me a screen of gibberish as well. but xchat works fine except for the before mentioned corruption.
[17:57] <bradpitt> cos after i upgrade from backports, qt apps are crashed.
[17:58] <sysop2> hey brad good work in NO
[18:07] <maisukon> What makes Kubuntu be better?
[18:07] <maco> than ubuntu? kde :)
[18:09] <dragonmere> hello
[18:10] <mitevi> hi
[18:10] <mitevi> im new here
[18:10] <dragonmere> yeah me too sorta
[18:10] <dragonmere> well, been using ubuntu for a long time, xubuntu recently...
[18:10] <dragonmere> just got a 'real' computer, decided to see what sorta crazy desktop-effects I can make it do
[18:11] <maco> dragonmere: whats confusing you about plasma?
[18:11] <dragonmere> I want to have different widgets on each desktop, but this 'zoom out' thing... i just don';t get it
[18:11] <mitevi> ill have soon ubuntu 9.10
[18:11] <dragonmere> dashboard just means a desktop that has widgets on it, right?
[18:12] <mitevi> yes
[18:12] <maco> dragonmere: dashboard is not much different than show desktop
[18:12] <maco> i dont know how zoom out/in works though. it seems not to if you dont use kwin (the kde window manager)
[18:13] <mitevi> i don't like my computer very much
[18:14] <mitevi> but when i have 9.10 ill be perfect
[18:14] <dragonmere> what exactly am I looking at when I'm zoomed out...? There's something conceptual here I'm just not wrapping my head around properly, i think.
[18:15] <Morydd> Does anyone know a reason why I'd get several instances of "/usr/share/apport/apport-kde needs administrative privileges" dialogs?
[18:15] <dragonmere> are the zoomed out dashboards the same as the multiple desktops?
[18:16] <dragonmere> really I just need a basic idiot's guide... searched for awhile, came across mostly technical guides.
[18:17] <mostafa_> hey there I install apache as a server and also installed netbeans ;then I want to run a php file but when I ran it ,it just opens a dialog to save the php file what should I do? please
[18:20] <dragonmere> i guess i'll just keep playing with it. I was getting this weird thing where one of my desktops would be two dashboards,,, it stopped doing that, so I dunno..
[18:20] <genii> mostafa_: sudo a2enmod php5
[18:21] <genii> mostafa_: Then restart your webserver: sudo /etc/init.d/apache2 restart
[18:24] <nookie^> is there any software which can be used to create cd covers?
[18:25] <genii> !info kover
[18:26] <Morydd> Does anyone know a reason why I'd get several instances of "/usr/share/apport/apport-kde needs administrative privileges" dialogs?
[18:27] <maco> dragonmere: i *think* they might be yet another layer..
[18:29] <dragonmere> i think I got it doing what I want it to...
[18:32] <SeekerNL> if I use growisofs I reach higher burning speed
[18:33] <dragonmere> there's just something about being able to throw your 4 desktops onto a cube, and then rotate said semi-transparent-cube for no apparent reason that I really like...
[18:34] <dragonmere> but i dunno about KDE's functionality over the other two flavors. Still getting the hang of it, I guess.
[18:34] <Tm_T> dragonmere: I thought some kind of cube is also in kwin
[18:35] <dragonmere> dunno
[18:36] <dragonmere> last few years, i've been running on a PIII 750hz. Been using xubuntu. Just got a 'real' computer, so I've never played with desktop-effects before.
[18:39] <apo> hi. has anone experienced a bug in kdesudo on lucid yet? i'm not able to press OK anymore. It just hangs at this point. i can still cancel.
[18:39] <apo> same happens with passwords entered in okular pdf files
[18:39] <apo> using sudo works
[18:42] <bmunger> im running kubuntu 9.10 with kde 4.3.4 and kgpg doesnt seem to run.. even by console it gets a pid but no output.. any ideas?
[18:44] <maco> bmunger: nothing in your tray?
[18:44] <maco> should be a little gold lock
[18:45] <dragonmere> whats the deal with knetworkmanager? does it work now with hidden SSID/WPA now? had some problems when I installed KDE... I used to have to kill it and run nm-applet, but I just noticed I'm running it...
[18:46] <dragonmere> i need a sandwich
[18:46] <rstob911> who wanted to know about desktop cube
[18:47] <dragonmere> me!
[18:47] <dragonmere> sort of. I mean I got it running. But I was the one asking questions and what not.
[18:49] <rstob911> if you go into the system settings then to desktop effects then it is in there make sure you have more than one desktop enables then it is ctrl f11 is what makes it appear you will also need the cube animation
[18:49] <orion> help
[18:49] <chaitu> +
[18:50] <mostafa_> genii:
[18:50] <mostafa_> genii: r u there yet?
[18:50] <dragonmere> yep yep. What I was trying to do was get different widgets on each side of the cube, and I finally got it. I was having a problem when I set plasma to use a different activity for each desktop and use a separate dashboard...
[18:50] <mostafa_> genii: I check it out but no use
[18:50] <mostafa_> :(
[18:50] <rajmahendra> Hello
[18:51] <rstob911> cool
[18:51] <dragonmere> which i do not understand the distinction between (use different activity for each desktop/use a separate dashboard)
[18:51] <rstob911> me either
[18:52] <dragonmere> I've got it all figured out until I hit the plasma icon in the top right corner, and choose "zoom out"
[18:52] <dragonmere> No clue whats going on there.
[18:53] <dragonmere> I want it to just be my separate desktops and dashboards??, but I have a feeling I'm looking at something a little different.
[18:53] <mostafa_> hey there please help :( how can I run the php code that outputs an html page with firefox please?
[18:53] <dragonmere> but definitely thanks rstob911. Took me about 2 hours last night to figure out what you told me.
[18:54] <rstob911> lol
[18:54] <Guest83170> exoo
[18:54] <Guest83170> how kubuntu root login >>>?
[18:54] <Tm_T> !root
[18:54] <dragonmere> (k/x)ubuntu doesn't use root
[18:54] <Tm_T> Guest83170: see above
[18:54] <ubuntu_> ciao
[18:55] <ubuntu_> !list
[18:56] <georgesuper4> hello everyone
[18:57] <dragonmere> hello georgesuper3
[19:22] <andriyko> hello. Can anyone help with configuring KTTSD to speak non-English, for example Russian?
[19:23] <bmunger> maco: yea i checked my tray, i used kgpg before.. it doesnt appear in the tray... but kde 4.3.4 is acting real weird anyways.. tasks appear multiple times for things that are running once.. or they dont disappear when closed
[19:28] <andriyko> please help with configuring KTTSD to speak non-English, for example Russian?
[19:29] <maco> bmunger: ah, this is from a ppa or something? im running normal karmic, which has 4.3.2
[19:31] <Morydd> Does anyone know a reason why I'd get several instances of "/usr/share/apport/apport-kde needs administrative privileges" dialogs?
[19:31] <matrix_> hallo
[19:32] <dwidmann> andriyko: does kttsd support Festival for a backend? It looks like Festival has a male speaker (package festvox-ru)
[19:33] <dwidmann> andriyko: seems it does support festival
[19:34] <andriyko> thank you very much
[19:35] <andriyko> festvox-ru is what i need
[19:35] <dwidmann> cool :)
[19:37] <Zed_Is_A_Good_Bo> heya anyone knows enough how to help a newbie with wireless?
[19:38] <dwidmann> I don't really, but there is a lot of information here
[19:38] <dwidmann> !wireless
[19:39] <Zed_Is_A_Good_Bo> thanks!
[20:01] <bmunger> maco: yes its from the ppa
[20:04] <m_tadeu> Hi...I keep getting a message that something happened to phonon and it's falling back to pulse audio
[20:04] <Quintasan> m_tadeu: is sound working for you?
[20:04] <maco> m_tadeu: its just saying that since pulseaudio is running, its going to use that instead of going straight to the speakers
[20:04] <Quintasan> m_tadeu: I get it here too, but the sound works fine
[20:04] <m_tadeu> it is
[20:05] <maco> unless it's breaking something, ignore it
[20:05] <m_tadeu> it looks like it's breaking something....just reported an amarok bug, which thy told me not to use pulse audio
[20:06] <maco> you can uninstall pulseaudio
[20:06] <maco> amarok works fine with pulseaudio for me, but a lot of kde people think its the source of all their bugs
[20:06] <m_tadeu> that won't affect skype or flash?
[20:07] <Roasted> whats up guys
[20:07] <maco> skype and flash dont have pulse support anyay
[20:07] <maco> *anyawy
[20:07] <maco> *anyway
[20:07] <m_tadeu> anyway, maybe there's something wrong on my phonon, right?
[20:08] <maco> remove pulseaudio and see how it goes
[20:08] <maco> if it works, great
[20:08] <maco> if not...reply to the bug report saying it doesnt make a difference
[20:08] <Roasted> fellas I got a question - under system tools - sharing, on my laptop I have my credentials saved to access our servers so itll automatically apply my login credentials accordingly - but on this kubuntu desktop here I dont have that option, gives me an error about KCM_KIO module or something. How can If ix it?
[20:11] <AlexZion> hi everyone..., after update my Kubuntu karmic with kde 3.3.4, I have a problem to shutdown my system , it simply doesn't works , even on my other pc ....
[20:11] <AlexZion> there is something i can do to fix it ?
[20:12] <Roasted> KDE 3.3.4?
[20:12] <Roasted> do you mean 4.3.4 or something?
[20:12] <Roasted> 3.3.4 is like 2006-ish
[20:12] <AlexZion> yeah , sorry ... :D
[20:12] <Roasted> ha, you confused me there
[20:12] <Roasted> I was like holy...
[20:12] <AlexZion> 4.3.4 you right
[20:13] <Roasted> what did you update? KDE? or Karmic?
[20:13] <AlexZion> I put the ppa kubuntu repos and I update using kPackage...
[20:16] <Roasted> alexzion what exactly are you doing, how is your system set up?
[20:16] <Roasted> is it a fresh install of karmic?
[20:16] <Roasted> is it jaunty but updated to karmic?
[20:17] <AlexZion> is a fresh Karmic Install.....
[20:17] <AlexZion> and I update kde to 4.3.4 yesterday , and after that , I can't switch off my computer .. :)
[20:19] <Roasted> what if you remove the PPA and reinstall kde?
[20:19] <marco> sera a tutti
[20:20] <nicklas_> yo
[20:21] <AlexZion> Roasted: what do you mean exactly ?, just remove the ppa repos and update again ?,or add a new repos from kde and update ?
[20:25] <Roasted> alexzion - well, Im on jaunty (my pc has issues with karmic)
[20:25] <Roasted> and I installed jaunty but I wanted KDE 4.3.2 (latest you can get on jaunty)
[20:25] <Roasted> so I installed the PPA using a method I found online
[20:26] <Roasted> that method backfired. When I logged into KDE, it just went black. I was like, shyt, what do I Do now...
[20:26] <Roasted> so I booted into console and removed the PPA from the sources list
[20:26] <Roasted> did an update, reinstalled KDE and got it back, found a diff guide with the PPA and I was good to go
[20:27] <AlexZion> ok , I will check it , thanks a lot ....
[20:27] <Roasted> I havent used KDE that extensively. Ive been a Gnome user for 4 years and just recently tried KDE after I saw the monstrosity Gnome was developing with Gnome Shell, and I'm here to stay now, but my KDE knowledge is still limited, unfortunately.
[20:27] <Roasted> But that's what I did
[20:27] <Roasted> removed the PPA, updated, tried it, didnt work, reinstalled KDE (not linux itself, just the KDE desktop) and I was back in action.
[20:31] <brmassa> guys, my 2nd and 3rd HD are not getting mounted on boot. How can i set them to do so?
[20:45] <stuart_> heya folks...is this the right place for a ubuntu newbie to ask a couple of questions?
[20:46] <maco> stuart_: if youre using kubuntu, yes. if ubuntu #ubuntu
[20:46] <stuart_> aah kk thanks wrong place :)
[20:52] <kaddi> ok, what is xsession-errors and can I just delete it?
[21:00] <Jonathan____> hello
[21:00] <Jonathan____> how do i reformat a memory stick...
[21:00] <Hagus> Greetings :)
[21:00] <Jonathan____> :)
[21:01] <Hagus> I too would like to know the answer to that question.  Let me Google it ;)
[21:02] <Hagus> see http://ubuntuforums.org/showthread.php?t=122036 Jonathan____ :)
[21:06] <Roasted> so, guys, major problem
[21:07] <wickedwackguy> hi
[21:07] <Roasted> I was copying a file to my hard drive and didnt realize it was almost maxed, it maxed out, gave me an error, okay no big deal, but then KDE crashed. Once KDE crashed, I rebooted. Once I rebooted, KDE is no where to be seen. Somehow an xubuntu looking menu (gnome, but very simpleish) comes up. I CANNOT get KDE back to save my life. I had this happen with Gnome once, but I didnt have to reinstall my OS because of it. Is there a quick fix? Or am Ig oing ba
[21:07] <Roasted> ck to Gnome?
[21:07] <wickedwackguy> how do i get my design changed?
[21:08] <Jonathan____> ok and how so i send files to a windows computer over a wifi network
[21:09] <Roasted> Ive never sent files TO a windows computer
[21:09] <Roasted> Ive only pulled files FROM a linux computer
[21:09] <Roasted> cause, windows, ya know... doesnt really like to play nice with other operating systems
[21:09] <Jonathan____> well i dont really mind which way it goes
[21:09] <Jonathan____> so...
[21:09] <Roasted> I'd install samba and set up a network share folder
[21:09] <Jonathan____> network... smb...
[21:09] <Roasted> itll make your computer act as a file server, in essence
[21:09] <Jonathan____> on the nix or the windo?
[21:10] <Roasted> on nix
[21:10] <Roasted> sudo apt-get install samba
[21:10] <Roasted> then go to add/remove and search for "samba", it'll install a simple GUI tool to set up the path
[21:10] <wickedwackguy> i got a design but it wont let my "apply" it
[21:10] <Roasted> then just add your user to samba (user needs to exist on the linux machine as well as samba) and set up a file path to the folder you want to share
[21:10] <Jonathan____> in dolphin there is
[21:11] <Roasted> there is what
[21:11] <Jonathan____> network. in here there is samba share and i can see both windows pc and linux pc
[21:11] <Roasted> cant you paste the files to the windows pc?
[21:12] <Jonathan____> well i cant see the public folder structure
[21:12] <Hagus> cd ruby
[21:12] <Hagus> oops
[21:12] <Hagus> sorry
[21:13] <Hagus> I was going to go to the ruby room :/
[21:13]  * Hagus has a decrepit brain
[21:14] <Jonathan____> so how do i get to see the public folder structure of a windows across the network
[21:14] <Jonathan____> through dolphin
[21:16] <Roasted> I never did it from linux to windows
[21:16] <Roasted> I always to windows to linux
[21:16] <Jonathan____> its kk
[21:16] <Roasted> which requires me to set up samba in a server environment and share it out accordingly
[21:16] <Jonathan____> i memory stick it
[21:16] <Jonathan____> lol
[21:17] <kaddi> how can I reenable compositing after it has been disabled?
[21:17] <wickedwackguy> ok somebody have time for me?
[21:17] <wickedwackguy> kaddi: terminal compiz
[21:17] <robin0800> kaddi: compiz --replace
[21:18] <kaddi> I'm not using compiz, it isn't even installed
[21:18] <wickedwackguy> how do i apply my new design?
[21:18] <Jonathan____> lol
[21:19] <kaddi> Kde said it was disabling window compositing cause my pc was running slow and all desktop effects are disabled, I would like them reenabled
[21:19] <|moe|> kaddi: alt + shift + f12
[21:19] <kaddi> |moe|: thanks :)
[21:20] <|moe|> kaddi: most welcome:D
[21:20] <wickedwackguy> and still no vlue on how the hell i apply my fucking design?
[21:20] <kaddi> does that also work when I want to disable it at some point? :)
[21:20] <wickedwackguy> the apply button is disabled
[21:20] <|moe|> kaddi: yes, it toggles effects on and off
[21:21] <kaddi> |moe|: awesome, thanks.
[21:21] <Shockrates> hi
[21:21] <|moe|> kaddi: whatup! ;)
[21:21] <Shockrates> how can i enable the folder preview of my desktop folder widget?
[21:22] <wickedwackguy> ok fuck it its a bug, i will just change the fucking config file
[21:22] <wickedwackguy> cya
[21:24] <Shockrates> hi
[21:24] <Shockrates> do you know the widget desktop folder?
[21:25] <dragonmere> Shockrates, on the Kubuntu desktop? Try #kubuntu
[21:26] <dragonmere> oh shoot this is the #kubuntu channel... heh
[21:26] <dragonmere> what bout it? i'm no expert, but I'll help if i can
[21:27] <Shockrates> when i move my cursor over a folder in it. it doesnt preview the folder right?
[21:27] <Shockrates> how can i enable/disable this feature
[21:27] <dragonmere> lemmie have a look-see. Still trying to figure out all the ... features ... of KDE myself...
[21:29] <dragonmere> did you right click the widget, under folder view settings, make sure preview is checked?
[21:30] <dragonmere> I took the default desktop folder view off after installed KDE, so if that doesn't work, maybe delete that widget, and add a new folder view... I just added one, and it previews
[21:31] <Shockrates> oh
[21:31] <Shockrates> what if i dont like it
[21:31] <Shockrates> to preview folders
[21:32] <dragonmere> the advanced options button next to the check box should let you pick?
[21:32] <dragonmere> like I said, i ain't no expert... still struggling with KDE myself sorta... just trying to help.
[21:39] <alesan> Hi I'm using the encrypted homedir thing
[21:41] <alesan> is there a way one can encrypt "/root" also?
[21:41] <sml1226> Can anybody tell me how to enable double click instead of single click in 9.10?
[21:42] <Vroomfondle> it's in System Settings, under keyboard & mouse -> mouse, sml1226
[21:44] <wickedwackguy> ok this is somthing that shouldnt be
[21:44] <sml1226> I see no Keyboard & Mouse in system settings, I know it was there in previous versions, but I can't seem to find it in 9.10
[21:44] <wickedwackguy> why doesnt it apply my design that i chose
[21:44] <nicklas_> öj
[21:49] <wickedwackguy> desktop-design-dtaials. i choose a design and it wont aplly or even let me apply
[21:50] <wickedwackguy> any ideas?
[21:51] <nicklas_> http://www.dumpt.com/img/viewer.php?file=nij63ued86s9jipao8p4.png
[21:52] <wickedwackguy> yeah thats what i was trying to get away from and back to somthing with white
[21:52] <wickedwackguy> but the damn thing wont let me
[21:56] <wickedwackguy> i give up
[21:57] <wickedwackguy> nobody that can help me?
[22:10] <KaAttaKilla> hi, got a problem, on my laptop im trying to boot kubuntu but the resolution is way off and login screen is cutoff on bottom and right... wont load up just flashes and loops. Trying w/ both live flash drive and actual install on my external HD
[22:11] <KaAttaKilla> anyone actually here?
[22:13] <TeLLuS> KaAttaKilla: Loops?  Could you try login from console and run startx. Does it do the same?
[22:15] <KaAttaKilla> not totally sure i know what u mean, i think i do, i can try... thats when i inturrupt boot and hit e.. then ctrl+c to access cmd prompt right?
[22:15] <TeLLuS> KaAttaKilla: Could be the driver, settings or boot splash interfering.. Got any log?
[22:16] <KaAttaKilla> i was reading forum posts and tried adding both vga=0x314 and (when it told me that was depreciated) gfxpayload=800x600x16
[22:16] <TeLLuS> KaAttaKilla: It is probably not the error I was thinking off.
[22:16] <KaAttaKilla> adding @ grub after hitting e
[22:17] <KaAttaKilla> ok im at cmd @ grub... i see "sh:grub> _"
[22:17] <TeLLuS> KaAttaKilla: try without slash in grub, remove it..
[22:17] <KaAttaKilla> the splash and everything works fine, i get to the login screen and i see it... but only like the upper left corner and part of the login box
[22:18] <KaAttaKilla> i type in my login/pass and it starts loading up.. then flashes a few times and returns to login
[22:18] <TeLLuS> KaAttaKilla: What grafic driver?
[22:18] <KaAttaKilla> no clue
[22:19] <TeLLuS> returns to login   in terminal?
[22:19] <KaAttaKilla> im pretty new to linux, but comp repair tech w/ windows
[22:19] <TeLLuS> or console?
[22:19] <KaAttaKilla> the normal login, the full ui
[22:19] <TeLLuS> ah, I see
[22:19] <KaAttaKilla> im not comfortable @ all w/ cmd in linux yet, none of the commands i know and try seem to work >.<
[22:20] <TeLLuS> Try Ctrl + Alt + F1
[22:20] <KaAttaKilla> at the login?
[22:20] <TeLLuS> to see if you can get to the console
[22:21] <TeLLuS> and then login,  Is it a 9.10 version?
[22:22] <KaAttaKilla> it is 9.10 yes
[22:22] <KaAttaKilla> ok right now i see:
[22:22] <KaAttaKilla> ubuntu 9.40 portablelinux tty1
[22:22] <TeLLuS> ok
[22:22] <KaAttaKilla> portableLinux login: _
[22:23] <TeLLuS> Type: lspci | grep VGA
[22:23] <KaAttaKilla> ok i logged in w/ my info
[22:23] <KaAttaKilla> oops >.<
[22:23] <TeLLuS> good
[22:23] <KaAttaKilla> i see: brad@PortableLinux:~$
[22:26] <KaAttaKilla> k i typed that and i see: 01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro] (rev 01)
[22:29] <TeLLuS> hmm, that would not have been my guess, but ok. I saw a similar thing with a ATI card.  Maybe we could get some clues from the log then.  more /var/log/Xorg.0.log
[22:30] <KaAttaKilla> ok typed that
[22:30] <KaAttaKilla> i got way too much to retype
[22:30] <KaAttaKilla> what u looking for?
[22:31] <KaAttaKilla> X.Org Video Driver: 5.0 ?
[22:31] <TeLLuS> yes, Can you use ssh from current computer?
[22:31] <KaAttaKilla> i dont have anything set up for ssh
[22:32] <TeLLuS> then you could use copy and paste..
[22:32] <KaAttaKilla> k
[22:32] <KaAttaKilla> ?
[22:33] <TeLLuS> Is the PortableLinux network connected?
[22:33] <KaAttaKilla> not seeing it in my network no
[22:34] <TeLLuS> Do it have cable or wireless?
[22:34] <KaAttaKilla> its ethernet, plugged in, but it hasnt booted up all the way as far as i know
[22:34] <Shockrates> hola
[22:34] <Shockrates> how can i set a hotkey to switch between keyboard layouts?
[22:35] <TeLLuS> KaAttaKilla: try run: sudo ifconfig
[22:35] <TeLLuS> KaAttaKilla: It should show your ipaddress  if it got one..
[22:36] <TeLLuS> bit advanced probably for starters.. but we could try..
[22:36] <KaAttaKilla> k 1sec... scrolling through log
[22:37] <KaAttaKilla> big log.....
[22:37] <TeLLuS> KaAttaKilla: Check the end of the log if you see any error..
[22:38] <TeLLuS> KaAttaKilla: Could be (EE) in the begining..
[22:38] <KaAttaKilla> how do i scroll up?
[22:38] <TeLLuS> KaAttaKilla: but I dont think so since you got a picture
[22:38] <KaAttaKilla> hitting up just cycles commands
[22:38] <TeLLuS> b can scroll up
[22:38] <TeLLuS> ahh ok not in the more program..
[22:39] <TeLLuS> then its shift + pg up
[22:39] <rdx> Hi there guys! I want to make the fonts and icons in the start/program menu smaller so all the categories fits without scrolling. is this possible?
[22:40] <TeLLuS> rdx: Just change the font size..
[22:40] <KaAttaKilla> ok can only see the end of the log, and no errors
[22:40] <KaAttaKilla> and dont look like i have an IPaddy
[22:41] <TeLLuS> KaAttaKilla: But it do have a link connection lite on the ethernet connector?
[22:42] <KaAttaKilla> this laptop has no lights @ ethernet or among the other lights on front
[22:42] <TeLLuS> KaAttaKilla: ok , could try to run anyway: sudo dhclient3 eth0
[22:43] <KaAttaKilla> says no such device
[22:43] <rdx> TeLLuS: Cant find the application menu font settings in System Settings -> Fonts?
[22:45] <TeLLuS> rdx: In the firs row to the right for me, apperence I think.. I have a localized version so I'm a bit unsure
[22:47] <TeLLuS> KaAttaKilla: sudo ifconfig eth1    also give no such device?   Then maybe it is not detecting the ethernet or wrong driver.. Too new laptop maybe.. :/
[22:47] <KaAttaKilla> laptop is a gateway like 3yrs old
[22:47] <rdx> TeLLuS: But which item under the font dialog will change the KickOff apps text?
[22:47] <TeLLuS> KaAttaKilla: only strange HW then.. :)
[22:48] <KaAttaKilla> it sees the ethernet device
[22:48] <KaAttaKilla> i just dont think its connected
[22:48] <TeLLuS> rdx: trial and error..
[22:49] <TeLLuS> KaAttaKilla: well do the link lamp on the other end of the cable litght up?
[22:50] <KaAttaKilla> its blinking orange
[22:55] <KaAttaKilla> i typed sudo ifconfig eth1 for the fun of it
[22:55] <KaAttaKilla> that did something: listening on LPF/eth1/00:03:etc
[22:56] <KaAttaKilla> DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
[22:56] <KaAttaKilla> and scrolled more like that^ w/ diff numbers on the end
[22:57] <TeLLuS> KaAttaKilla: Is it connected to a switch or something else?
[22:57] <KaAttaKilla> yea, router
[22:58] <TeLLuS> KaAttaKilla: type?
[22:58] <TeLLuS> KaAttaKilla: manufacturer?
[22:59] <TeLLuS> KaAttaKilla: ADSL?
[22:59] <KaAttaKilla> trendnet
[22:59] <KaAttaKilla> wireless n gigabit router
[23:00] <KaAttaKilla> adsl?
[23:00] <TeLLuS> KaAttaKilla: TEW-672GR?
[23:01] <KaAttaKilla> -633GR
[23:03] <TeLLuS> KaAttaKilla: should be connected then,  did dhclient3 stop with the message sleeping?
[23:03] <KaAttaKilla> yea
[23:03] <KaAttaKilla> No working leases in persistent database - sleeping
[23:05] <JediMaster> hey guys, can anyone suggest an alternative to GIMP to view and/or edit PSDs? Not one single PSD I've opened in the last 3 months has looked anything like it should in GIMP =(
[23:05] <JediMaster> mainly layers that look like they're not having their masks applied correctly
[23:05] <TeLLuS> KaAttaKilla: So it did not get an ip from the DHCP..  But there is an DHCPserver in there? Tried with other computers?
[23:07] <TeLLuS> JediMaster: Krita..  But from version 7 on, the Photoshop file format is closed
[23:07] <wizardslovak> i got question
[23:08] <JediMaster> TeLLuS, thanks but I've found Krita won't open PSDs
[23:08] <KaAttaKilla> this computer is connected to the same router
[23:08] <wizardslovak> whats the difference btw kubuntu and kubuntu netbook edition?
[23:08] <wizardslovak> it has kde4 right?
[23:09] <Tm_T> wizardslovak: just that kubuntu-netbook has plasma-netbook enabled by default (and possibly something else I'm not aware of)
[23:09] <wizardslovak> i just dontk know what edition should i use for my notebook
[23:10] <Tm_T> wizardslovak: both have same functionalities, you install the other, and you get what the other gives by changing settings
[23:10] <TeLLuS> JediMaster: Depend on the content in the psd.. https://lists.ubuntu.com/archives/ubuntu-users/2005-November/056045.html
[23:10] <Tm_T> so whichever you choose, you end up having pretty much same (:
[23:11] <wizardslovak> true
[23:11] <wizardslovak> i will use it to manage server anyways
[23:12] <TeLLuS> KaAttaKilla: Yes, but sometimes the router can be configured to be transparant but it  is not verry common..
[23:12] <wizardslovak> and regular kubuntu is  103 mb smaller
[23:12] <KaAttaKilla> it may well be connected and i misread it
[23:12] <JediMaster> TeLLuS, maybe I'm missing a plugin but krita won't actually let me open a .psd file, it doesn't even show the file in the open dialog
[23:13] <noaXess> i cant install k9copy.. but: k9copy: Depends: mencoder but it is not going to be installed
[23:14] <TeLLuS> JediMaster: Yep, same here..
[23:14] <noaXess> any idea to fix it? if i do try install mencoder: mencoder: Depends: mplayer-nogui but it is not going to be installed
[23:14] <noaXess> so.. if i need reall install mplayer-nogui?
[23:15] <TeLLuS> KaAttaKilla: Try ping or sudo aptitude update
[23:15] <KaAttaKilla> sudo aptitude update did not work, could not resolve
[23:16] <TeLLuS> ok,  probably not connected..
[23:18] <vbgunz> ii upgraded kde from 4.3.3 to 4.3.4 and konqueror worked splendid for a while *but* now konqueror is insanely slow. anyone know whats up?
[23:18] <noaXess> any tip, idea?
[23:18] <TeLLuS> It is late here, I really need to sleep. Good luck all. Maybe someone else can continue..
[23:18] <noaXess> vbgunz: i only work in dolphin, does dlphin work also slwo? any networj connection configured in favorites?
[23:19] <noaXess> TeLLuS: nice sleep :)
[23:19] <KaAttaKilla> k quick question
[23:19] <KaAttaKilla> how do i attempt to load the UI from cmd?
[23:19] <TeLLuS> ok
[23:19] <noaXess> KaAttaKilla: then ask
[23:19] <noaXess> KaAttaKilla: which ui?.. sorry don't see your prob
[23:19] <vbgunz> noaXess: I dont use dolphin **but** it too is insanely slow
[23:19] <vbgunz> its not even coming up
[23:20] <noaXess> vbgunz: hm..have you any favorites/places that are network connections? smb, sftp or something else?
[23:20] <TeLLuS> KaAttaKilla: Since it is probably running already, need to stop it first.. sudo service kdm stop
[23:21] <vbgunz> noaXess: no I don't think so
[23:21] <KaAttaKilla> noaXess: TeLLuS has been helping me, when i boot my brothers laptop up w/ my external HD.. when i get to login screen its offcenter, i only see upper left corner.. like resolution is messed up.. he had me hit ctrl+alt+f1 to get to cmd
[23:21] <TeLLuS> KaAttaKilla: You can guess how to start it then, or even better start it from console with startx..
[23:21] <vbgunz> noaXess: not sure why it's slow really. dolphin just came up
[23:21] <vbgunz> the interface to dolphin registers my clicks about a minute after I do the clicking
[23:22] <KaAttaKilla> ok ty TeLLuS, back to my messed up loggin
[23:22] <KaAttaKilla> ugh it was trying to load up and just flat froze
[23:24] <noaXess> vbgunz: ??.. so you can start dolphin and/or konqueror... so.. have you tried it from konsole.. to see outputs?
[23:24] <KaAttaKilla> how can i try to change resolution from the kmd?
[23:24] <TeLLuS> KaAttaKilla: Try touth the power butten just a second.. and listen (wait) for it to shut down
[23:24] <TeLLuS> KaAttaKilla: that was to shut it down..
[23:25] <vbgunz> noaXess: no
[23:25] <vbgunz> noaXess: I can try that
[23:25] <KaAttaKilla> TeLLuS right, i already reset it, the mouse was even frozen
[23:25] <KaAttaKilla> thinking now it might be possible to change resolution in the kmd?
[23:25] <noaXess> vbgunz: each app can also be started from konsole.. :).. so maybe there are more outputs.. to see whats happend
[23:26] <vbgunz> noaXess: konsole didn't say a word about konqueror
[23:26] <TeLLuS> KaAttaKilla: yes, but sometimes a hard reset by holding the power for long time is not needed.
[23:26] <JediMaster> how do you find a device's size (not a partition) from the command line? parted only seems to show the partition sizes and not the device
[23:27] <KaAttaKilla> yea
[23:27] <noaXess> vbgunz: but you can run it from there?
[23:27] <JediMaster> hmm, could be because it's a VM (xen)
[23:27] <vbgunz> noaXess: yeah
[23:27] <TeLLuS> KaAttaKilla: Also we forgot to try and disable splash in grub, that could also help sometimes..
[23:27] <vbgunz> noaXess: I just did the same with dolphin and got some output
[23:27] <vbgunz> noaXess: <unknown program name>(15322)/: Communication problem with  "dolphin" , it probably crashed.
[23:28] <vbgunz> noaXess: Error message was:  "org.freedesktop.DBus.Error.NoReply" : " "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." "
[23:28] <vbgunz> thats it
[23:28] <noaXess> vbgunz: hm... can you try to delete the konq prefs?
[23:28] <TeLLuS> now really over and out.
[23:28] <KaAttaKilla> the splash is normal size, nothing is weird till i get to the login
[23:28] <noaXess> so backup it first.. ..
[23:28] <KaAttaKilla> night teatime
[23:28] <KaAttaKilla> TeLLuS*
[23:28] <KaAttaKilla> any of u other guys know how to change resolution from kmd?
[23:28] <vbgunz> noaXess: konq preferences?
[23:30] <vbgunz> I'll try mving .kde/share/apps/konqueror/
[23:30] <noaXess> vbgunz: first backup them: .kde/share/config/konquerorrc and also the directory .kde/share/apps/konqueror/
[23:30] <noaXess> and then try again..
[23:32] <vbgunz> noaXess: yeah, I backed up and moved those directories and files out of the way and konqueror started right up
[23:32] <vbgunz> seems responsive
[23:32] <vbgunz> but damn, I have a bunch of stuff setup for konqueror and I have no idea where to start cherry picking
[23:33] <noaXess> vbgunz: so.. it's an upgrade.. :) 4.3.3 to 4.3.4.. so.. you will need to reconfigure your konquerror..
[23:33] <noaXess> vbgunz: have you also upgraded from 9.04 to 9.10?
[23:34] <vbgunz> noaXess: yes
[23:34] <vbgunz> that was a while ago
[23:34] <noaXess> vbgunz: try to recover only .kde/share/config/konquerorrc
[23:35] <noaXess> vbgunz: it can be the upgrade from 9.04 to 9.10..
[23:35] <noaXess> i done upgrade from 8.04 trough 8.10 then 9.04 and then 9.10.. but then i see.. a fresh install is better ;)... so i buyed a new notebool.. with more power and do a fresh 9.10 install :)
[23:36] <noaXess> sonow.. quad core with 4gigs ra and 1tb hd with 9.1 64bit.. cool thing ;)
[23:40] <phoenixz> Hi there, If Im not mistaken, KDE4.4 Alpha should be released.. Are there any repos for kubuntu which may have this new marvel of tech available?
[23:41] <tsimpson> we usually don't package the pre-releases
[23:44] <Wish-> Hello can anyone help me fix my monitor settings?
[23:45] <vbgunz> noaXess: I never thought about messing with the konqueror folders but I am back up to speed just fine. thanks for pointing it out as an idea
[23:45] <noaXess> vbgunz: no problem.. thats the deal with IRC :) help.. if we can :)
[23:48] <Wish-> So can anyone help me with my monitor settigns?
[23:50] <mdeonte> what're the commands to link a folder inside another folder?
[23:50] <mdeonte> for example, i want to link my foler music into folder lighttpd-server
[23:51] <mdeonte> which are in the same directory
[23:53] <joshjtl> hey folks anyone know if there is anything that will zoom panel icons on cursor hover?
[23:54] <noaXess> so.. /me need sleeep..
[23:54]  * noaXess says bye to all