br14 | hello | 02:30 |
---|---|---|
br14 | I'm trying to install mythbuntu on a system with a pvr150, ivtv seems to be detecting the wrong chip type in my card, and is loading a firmware that errors with "Encoder mailbox not found" | 02:31 |
br14 | I'm not sure where to go from here | 02:31 |
mazzomaz | hi | 06:29 |
mazzomaz | When I run "sudo lircd" my RC isn't working - When I run it with "sudo lircd --driver=dev/input --device=/dev/input/event6" the RC is working fine :-/ | 06:30 |
mazzomaz | What I have to change that Lirc starts without any parameters ? | 06:31 |
rhpot1991 | mazzomaz: /etc/lirc/hardware.conf | 07:42 |
rhpot1991 | REMOTE_DEVICE | 07:42 |
mcastles | hey, can anyone tell me if I need to run mythwelcome as sudo so that the shutdown works? | 08:03 |
mcastles | when I say the shutdown, I mean the shutdown button when going to the menu | 08:19 |
mazzomaz | rhpot1991, i've changed /etc/lib/hardware.conf to REMOTE_DRIVER="devinput" and REMOTE_DEVICE="/dev/input/event6" - I think this is correct, isn't it ? | 08:24 |
mazzomaz | i mean /etc/lirc/hardware.conf .. ;) | 08:24 |
=== mcastles_ is now known as mcastles | ||
chromerium | rhpot1991: you should be able to cat the event device for your IR receiver and see crap when pressing buttons, right? | 09:46 |
mcastles_ | does anyone use the shutdown button in the menu of mythwelcome? | 10:38 |
=== mcastles_ is now known as mcastles | ||
wertwert1984 | hi please help i'm tring to compile redbutton browser on ubuntu 9.10 but what ever i try i get this error: /usr/bin/ld: cannot find -lXext collect2: ld returned 1 exit status make: *** [rb-browser] Error 1 | 16:18 |
wertwert1984 | and this is the full commandline output http://mythbuntu.pastebin.com/m318a5318 | 16:19 |
wertwert1984 | oh sorry that is mythbuntu 9.10 i'm on i have installed all the lib needed but it wont work :( | 16:21 |
Fleck | hey - can anyone give me config options for mythtv used in mythbuntu? | 19:16 |
superm1 | Fleck, you can see them by apt-get source mythtv and look at debian/rules | 19:19 |
superm1 | or look at myth{frontend,backend} --version | 19:19 |
superm1 | and it tells you what options were turned on at build time | 19:20 |
Fleck | nice, maybe i can use rule file to auto compile mythtv? | 19:21 |
Fleck | well - i like mythtv that comes with mythbuntu but i need one patch... | 19:24 |
Fleck | so i am trying to compile | 19:24 |
superm1 | Fleck, you can follow the build information at mythbuntu.org | 19:25 |
superm1 | to run a local instance of auto-builds | 19:25 |
superm1 | http://mythbuntu.org/cheatsheet | 19:25 |
superm1 | that's your best bet | 19:26 |
Shadow__X | superm1: is there a way to get motd worfking on mythtv .22 | 19:35 |
superm1 | Shadow__X, you mean mythtv-status? | 19:35 |
Shadow__X | yes | 19:36 |
darthanubis | and is it possible to get mythweb rss to work? | 19:36 |
superm1 | Shadow__X, enable the auto-builds and testing ppa and it should work | 19:36 |
superm1 | the one from lucid was backporte to testing | 19:36 |
superm1 | i dunno about mythweb rss even being broke | 19:37 |
darthanubis | Fatal error: require() [function.require]: Failed opening required 'modules/_shared/tmpl/rss/header.php' (include_path='.:/usr/share/php:/usr/share/pear') in /usr/share/mythtv/mythweb/modules/_shared/tmpl/_errors/unknown_module.php on line 23 | 19:37 |
darthanubis | Warning at /usr/share/mythtv/mythweb/modules/_shared/tmpl/_errors/unknown_module.php, line 23: | 19:38 |
darthanubis | require(modules/_shared/tmpl/rss/header.php) [function.require]: failed to open stream: No such file or directory | 19:38 |
darthanubis | I use the autobuilds repo | 19:38 |
superm1 | seems like a bug | 19:39 |
darthanubis | ah | 19:39 |
Fleck | superm1 the command was debian/rules build | 19:40 |
superm1 | Fleck, you are really best off just kicking it off to a personal PPA | 19:40 |
superm1 | you won't clutter your system then with build-depends | 19:41 |
superm1 | otherwise, it's actually dpkg-buildpackage | 19:41 |
superm1 | or debuild | 19:41 |
Fleck | superm1 yeah but ppa doesn't have patch i need | 19:41 |
superm1 | Fleck, yeah i'm saying run auto builds source package build locally but add your patch | 19:41 |
Fleck | superm1 http://svn.mythtv.org/trac/ticket/7481 | 19:41 |
darthanubis | *** Problem in mythweb The problem cannot be reported: This is not a genuine Ubuntu package | 19:42 |
Fleck | well that's what i am doing now ;) | 19:42 |
Fleck | added ppa, downloaded sources, added patch and now compiling | 19:42 |
superm1 | okay well what i was getting at was a little more in depth i guess | 19:42 |
superm1 | darthanubis, oh we might be missing a special apport rule for that right now to allow autobuilds bugs to be filed | 19:43 |
superm1 | just file it against the mythbuntu project | 19:43 |
darthanubis | ok | 19:43 |
darthanubis | ty | 19:43 |
superm1 | and mention that you couldnt use ubuntu-bug to file it | 19:43 |
darthanubis | ok | 19:43 |
superm1 | i just committed something for future builds that should allow ubuntu-bug to be used on mythplugins and myththemes too | 19:46 |
aclose | anyone know if there is/was a default passwd used for mysql in 8.10? | 19:48 |
aclose | myth is accessing the db fine, but i can't :) | 19:48 |
superm1 | aclose, no default password is ever used | 19:48 |
superm1 | it's random | 19:48 |
superm1 | it's in /etc/mythtv/mysql.txt | 19:48 |
aclose | oh, so i can pull it outta there to run a manual backup? | 19:49 |
aclose | doh, stupid typo | 19:51 |
aclose | stupid me | 19:51 |
aclose | thx superm1 :) | 19:51 |
Shadow__X | superm1: i installed and updated to auto builds so i just reinstall mythtv status again | 20:14 |
superm1 | Shadow__X, you need to enable -testing too from auto-builds | 20:15 |
superm1 | but yes | 20:15 |
superm1 | if you didn't, then you can go to mcc to do so | 20:15 |
Shadow__X | mcc? | 20:16 |
superm1 | !mcc | 20:16 |
Zinn | Mythbuntu Control Centre, one of the biggest advantages of Mythbuntu. You can configure a lot of normally complex tasks from one location. You can find it in your System menu after installing Mythbuntu. | 20:16 |
Shadow__X | why the testing build i chose the fixes branch? | 20:17 |
superm1 | testing is where we put the updated mythtv-status | 20:18 |
superm1 | the fixes branch is where the updated mythtv builds to work with it live | 20:18 |
Shadow__X | hmm but if i goto testing will that give me trunk builds or fixes still | 20:19 |
superm1 | fixes | 20:22 |
darthanubis | launch[ad is broken | 20:27 |
darthanubis | sigh | 20:27 |
darthanubis | I'll try later | 20:27 |
Shadow__X | thanks superm1 | 20:33 |
mechcozmo | hello, i'm getting a black screen upon auto-login | 20:46 |
mechcozmo | hello, i'm getting a black/blank screen upon auto-login after installing nVidea drivers | 20:54 |
bobbies | quick question, in mythbuntu 9.10 where do I control samba settings? In Ubuntu 9.10 there is a right click menu that isn't there in mythbuntu | 21:29 |
bobbies | Also is there a know problem with 9.10 RC and the PVR-150 card? | 21:29 |
Makr1 | Getting ready for a new install. I think I read there is no LIVE CD available for a pre-check. Is this true? | 22:07 |
Makr1 | I have a target computer that has WIN XP installed. When I install Mythbuntu, will I be prompted to just blow away the whole harddrive and replace with Mythbunto or do I have to wipe the drive first? | 22:41 |
Fleck | did make clean, now trying one more time | 23:27 |
Fleck | wow make complete ;) | 23:29 |
Fleck | wondering... will it work? ;) | 23:31 |
elmojo | Fleck: it compiled that fast? | 23:33 |
Fleck | yeah ;) | 23:33 |
elmojo | Fleck: doesn't sound right or you got a supercomputer | 23:33 |
elmojo | Fleck: did it build a .deb package? | 23:33 |
Fleck | well i used -j3 andAMD Athlon(tm) 64 X2 Dual Core Processor 5000+ | 23:33 |
Fleck | no not yet ;) | 23:34 |
elmojo | Fleck: it's probably worth the effort to know how to build your own packages since many people run patched versions out of necessity | 23:35 |
Fleck | i know how ;) | 23:36 |
Fleck | just whant to try it out | 23:36 |
Fleck | but i know that there was mythfronted.real so mythfrontend was some kind of scripts | 23:36 |
Fleck | now i need to find that script in packages | 23:37 |
elmojo | Fleck: I figured the whole process should have been pretty automated and at the end just run dpkg -i to install the newly created packages | 23:38 |
Fleck | yeah but my packages overwrites mythfronted script | 23:38 |
Fleck | updateing auto-apt will find out where it was :) | 23:39 |
yu210148 | Hi all, I'm getting "UPnpMedia: BuildMediaMap - NoVideoStartUpDir set skipping scan" when I start mythbackend on my master DB server and (I think) consequently when I fireup the frontend/slavebackend machine and try to media library-->watch videos I'm getting 'No files found'. | 23:43 |
yu210148 | I've got the video directory configured as ~/myth/videos | 23:44 |
yu210148 | and a test video file in there | 23:44 |
yu210148 | It's a dir on the master back end shared via NFS | 23:44 |
yu210148 | any idea why mythVideo can't see it? | 23:44 |
yu210148 | or is there something simple I'm missing? | 23:45 |
yu210148 | I'm pretty sure it's because the video isn't in the database as something playable but I'm not sure how to get it into the database. | 23:51 |
yu210148 | It could be that the video type isn't supported but it's a standard xvid avi with mp3 audio. | 23:53 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!