[00:02] alumno00: the ati driver might not support your video card, you should check first [00:03] reagleBRKLN: try ubuntu ubuntu [00:09] thanks. I solved the video problem. But the problem now is than I don't have audio. [00:09] ilumi: Any suggestion about adio problem? [00:12] alumno00: the intel hda should be your soundcard, but i dont know why it says ati [00:14] alumno00: it might be hdmi sound, which then would not be your sound card [00:14] What I see in multimedia is HDA ATI SB (STAC92xx Analog) [00:15] alumno00: first make sure you open kmix and that pcm and front volume is all the way up [00:15] alumno00: and master at 60% or so [00:15] alumno00: then try to play something === dendrobates is now known as dendro-afk [00:16] Yes, I've enabled all channels and all are 100%. And I play, but there is no sound... [00:17] run speaker-test in konsole. any sound? [00:19] iconmefisto: please use http://www.alsa-project.org/alsa-info.sh or ubuntu-bug alsa-base [00:19] iconmefisto: sorry [00:19] alumno00: please use http://www.alsa-project.org/alsa-info.sh or ubuntu-bug alsa-base [00:19] No sound... [00:20] alumno00: is it a laptop? [00:20] yes [00:20] it HP Pavilion Entertaiment PC [00:21] HP Pavilion dv6-2026es [00:21] alumno00: this may help: http://ubuntuforums.org/showthread.php?t=616845 [00:22] alumno00: do aptitude show alsa [00:23] it says it's not real package. It says alsa-base [00:24] alumno00: do aptitude show pulseaudio [00:25] It say is not installed [00:25] Kubuntu does not ship PulseAudio. [00:25] (yet) [00:26] I'm installing it [00:26] alumno00: im not sure if it will do anything, but you can install alsa and alsa-oss, then reboot and try [00:26] err, you're installing pulseaudio? [00:26] alumno00: pretty sure you'll find your answer here: http://ubuntuforums.org/showthread.php?t=616845 [00:27] OK, I'm going to read it [00:29] every now and again the KDE network manager system tray icon will not work. if I click on it it says in grayed out text "network management has been disabled." [00:29] Netowrk manager is running, and restarting it doesn't help [00:30] usually I have to log out and back in (not restart the system) [00:30] is there a way to tell network manager that it's NOT disabled when it gets in this state? [00:30] I can't seem to find out what's causing it [00:33] alumno00: the file you need to edit is now named /etc/modprobe.d/alsa-base.conf [00:34] Yes, thats what i'm trying to do. I put there "options snd-hda-intel model=3stack" [00:34] and now i'm looking for the card [00:36] aplay -l and then match what that says to the list on that page [00:37] but I cant find my devide: [HDA ATI SB], dispositivo 0: STAC92xx Analog [STAC92xx Analog] [00:37] how can i install kde 4.4rc1 on kubuntu9.10? [00:38] do i need to add -> deb http://ppa.launchpad.net/kubuntu-ppa/beta/ubuntu karmic main [00:38] deb-src http://ppa.launchpad.net/kubuntu-ppa/beta/ubuntu karmic main [00:38] rite? [00:38] to my sources.list [00:38] alumno00: what about: cat /proc/asound/card0/codec#* | grep Codec [00:38] Codec: IDT 92HD75B3X5 [00:38] Nafri: http://www.kubuntu.org/news/kde-sc-4.4-rc-1 [00:39] yea i've checked that link, it says i've to add ppa:kubuntu-ppa/beta to my sources [00:39] Nafri: last instructions should work add ppa:kubuntu-ppa/beta in kpackagekit [00:39] hello everyone, I'm new to KDE and was wondering how I make each desktop have a diff backgrounds in KDE 4.3? [00:41] Nafri: dont add it to sources.list, but in kpackagekit... that will add it to /etc/sources.list.d/ as a seperate file... === eric is now known as Guest67698 [00:43] ok, do i've to add the key aswel? or just need to add ppa:kubuntu-ppa/beta ? [00:44] oh yea now it is showing updates in kpackagekit... === Guest67698 is now known as eric [00:44] Nafri: iirc the key is then added automatically [00:44] 4.3.90 is 4.4rc1 rite? === eric is now known as Guest16819 [00:44] Nafri: right, its a Release Candidate! its not officially released! [00:45] alumno00: have a read of this: https://answers.launchpad.net/ubuntu/+source/alsa-driver/+question/80818 [00:45] I'm going. Thanks for your help. [00:45] Ok, i'm going to read it. [00:47] It's too late. I'll try tomorrow. Thanks === dendro-afk is now known as dendrobates [00:53] having a problem with ubuntu-bugs kgpg doesnt seem to do anything === Guest16819 is now known as eric === eric is now known as Guest593 === Guest593 is now known as eric === fmagno is now known as bombel === eric is now known as Guest22112 [01:10] is it possible to get my sound to my bluetooth speaker? [01:19] what do I need to extract an ISO into it's individual files? [01:19] using kubuntu of course. === ubuntu is now known as Toru [01:29] Hi how can I install a better version of ktorrent without having to compile it? Installed: 3.2.4+dfsg.1-1ubuntu1 I need version 3.3 or higher [01:42] cjae: ktorrent sucks, use something else [01:43] cjae: try deluge or transmission, personally i preffer vuze [01:43] ilumi: trammission changes to much rtorrent is cli afaik, deluge is almost as bad as azureus [01:43] too* [01:43] azureus is the best torrent client on linux imo [01:44] ilumi: has it got better since java opened up? [01:44] cjae: dont know , it's always been good for me [01:44] ilumi: high spec machine? [01:45] it's not slow [01:46] vuze is crossplatform right [01:46] what dont you like about transmission and deluge? [01:46] all I need ktorrent to do is properly report tracker data [01:46] otherwise it is very good [01:47] i am running kde4.4 rc1 and i have a praticular window that when pulled up cannot be resized and it seems that kde has stored an incorrect default window size because the bottom is way off the screen. can i reset stored window parameters? if so how? [01:47] cjae: yeah, but if you gonna use it, get the beta after you install, because the stable release has some problems with java [01:47] cjae: at least i had some problems with sorting peers etc [01:48] cjae: but if you dont want to mess with it just pull whatever they have in the repos [01:49] ilumi: I think it is the fact I dont like gnome, not that is not a fine environment [01:49] cjae: what do you mean [01:50] thats a question that could start a war so I will not answer it, not that #kubuntu is very lively [01:50] :p [01:51] qbittorrent looks very promising though but is not accepted as a client where I need it ilumi [01:52] cjae: well i you want new version of ktorrent youll probably have to compile it from source, [01:52] cjae: unless they have it prepackaged on their website [01:53] no [01:54] ilumi: was hoping to find a third party repo that might have it :) [01:55] ilumi: can I uninstall a compiled from source app with aptitude? [01:56] * cjae has problems with compiled app breaking system when upgrade time comes [01:57] cjae- no, apt doesn't know anything about programs you've compiled yourself [01:59] Dragnslicer: ok so I would have to manually remove it first when the time comes... [01:59] Yup [02:00] cjae - Or you may try to re-install things you have compiled with checkinstall, then "dpkg -r" it later. [02:01] Dragnslicer: I have my router firewall to port forward for udp for ktorrent tracker info, but when I check the firewall with kt running it says it is not open but for the TCP it is and the same rule except UDP of course so is this a kt bug? [02:26] deb http://ppa.launchpad.net/kubuntu-ppa/backports/ubuntu jaunty main ... may I switch this to karmic? [02:26] cjae, they dont have a karmic version? [02:27] looking [02:27] they do [02:28] bazhang: how can I search the site more effiencently? [02:28] cjae, ppa sites? or just that one [02:28] either [02:29] ppa [02:29] let me find a link [02:30] https://launchpad.net/ubuntu/+ppas [02:31] cjae, that what you mean? ^^ [02:32] well I opened http://ppa.launchpad.net/kubuntu-ppa/backports/ubuntu but then I have to know which sub directory it is under [02:33] the link works nice though [02:34] just typing backports in the site brings up a long list--kubuntu-ppa amongst them [02:34] deb http://ppa.launchpad.net/baudm/backports/ubuntu karmic main deb-src http://ppa.launchpad.net/baudm/backports/ubuntu karmic main will this just let me get one package or everything there? [02:35] https://launchpad.net/~kubuntu-ppa/+archive/backports [02:37] ok so how do I get just one package from there? [02:39] cjae, you are adding to sources.list manually? why not use add-apt-repository [02:39] sudo add-apt-repository ppa: [02:39] cjae, sudo apt-get install appname [02:39] ?? [02:40] following the above , and updating [02:41] https://help.ubuntu.com/community/Repositories/CommandLine#Adding%20Launchpad%20PPA%20Repositories [02:41] bazhang: yes but when I do a aptitude safe-upgrade wont that take everything off deb http://ppa.launchpad.net/baudm/backports/ubuntu karmic main or whatever repo [02:42] bazhang: do you know what I am trying to say? or is it in backports it will only get the app I ask for eg. sudo aptitiude install ktorrent? [02:43] cjae, yep I understand. you choose whatever to install from the repo [02:43] cjae, same as regular repos :) [02:44] bazhang: my understanding was if you insert a repo eg. deb http://ppa.launchpad.net/baudm/backports/ubuntu karmic main a sudo aptitude will take everything from it instead of just one app [02:44] sudo aptitude safe-upgrade* [02:47] how can i tell how much installed ram i have on my machine? [02:47] ppa:baudm/backports is the name of the PPA [02:47] jb0694, the command free in konsole [02:48] bazhang: thanks [02:48] sudo add-apt-repository ppa: baudm/backports [02:48] ugh [02:48] tnx [02:49] yw [02:55] i just installed kde4.4 rc1... but when on startup (just after login) my kde crashes and all i can see is black background [02:55] i also get this application error [02:55] Application: Plasma Workspace (kdeinit4), signal: Segmentation fault [02:55] [Current thread is 1 (Thread 0x7f029ff55750 (LWP 1587))] [02:55] Thread 2 (Thread 0x7f027e7ce910 (LWP 1588)): [02:55] #0 0x00007f029e1955a9 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/libpthread.so.0 [02:55] #1 0x00007f029e42067b in QWaitCondition::wait(QMutex*, unsigned long) () from /usr/lib/libQtCore.so.4 [02:55] #2 0x00007f029cbdc3ec in ?? () from /usr/lib/libQtNetwork.so.4 [02:55] #3 0x00007f029e41f6c5 in ?? () from /usr/lib/libQtCore.so.4 [02:55] Irfan_: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [02:55] #4 0x00007f029e190a04 in start_thread () from /lib/libpthread.so.0 [02:58] any idea? [03:15] i just installed kde4.4 rc1... but when on startup (just after login) my kde crashes and all i can see is black background [03:18] anybody knows how can i remove the widgets from commandline? i think it has something to do with widgets [03:45] hello, has anybody able to sucesfuly install kde 4.4rc1? [03:51] hello, has anybody able to sucesfuly install kde 4.4rc1? [03:51] Nafri: yeah bunch of people got it to work, but ive seen a lot of problems too [03:52] well i just installed kubuntu 9.10 (with kde4.3.2) than upgraded to kde4.4rc1.. and on startup it crashes [03:52] and all i see is black background [03:52] althoug i can run the apps using Run (alt + f2) [03:53] any idea? [03:53] Try running konsole, then from that plasma-desktop (It may give you more of an idea what's wrong) [03:54] it gives following error message [03:54] Application: Plasma Workspace (kdeinit4), signal: Segmentation fault [03:54] [Current thread is 1 (Thread 0x7f029ff55750 (LWP 1587))] [03:55] Thread 2 (Thread 0x7f027e7ce910 (LWP 1588)): [03:55] #0 0x00007f029e1955a9 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/libpthread.so.0 [03:55] #1 0x00007f029e42067b in QWaitCondition::wait(QMutex*, unsigned long) () from /usr/lib/libQtCore.so.4 [03:55] #2 0x00007f029cbdc3ec in ?? () from /usr/lib/libQtNetwork.so.4 [03:55] #3 0x00007f029e41f6c5 in ?? () from /usr/lib/libQtCore.so.4 [03:55] #4 0x00007f029e190a04 in start_thread () from /lib/libpthread.so.0 [03:55] Nafri: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [03:56] any idea? === javier is now known as Happy === Happy is now known as Happy_Toru === tyler is now known as Guest82316 === Guest82316 is now known as tle === tle is now known as thelinuxexperime === kush is now known as kush37 === family is now known as BigBLue [04:50] hey guys I forgot my root password anyone know how to solve this problem [04:50] how can i completely remove gnome and all of its default programs? i want to switch to kde entirely [04:51] i dont think anyone is on [04:51] do you know how to recover a root password [04:52] anyone here? [04:53] how do you find more channesl [05:18] is anyone using kaffeine or dragon player? i can't rewind/forward .flv files using these players [05:18] any idea? [05:19] no one answers questions here lol [05:19] it depends on the flash file, some allow seeking [05:19] wtf [05:19] lol i take that back [05:19] its midnight across much of the US [05:19] hard time to get answers anywhere [05:20] becuz us has all the answers [05:20] wel.. but all those flv work fine with smplayer [05:20] odd [05:20] anyone know how to reset root password [05:20] if totem/kaffeine dont work for me i usually try vlc next [05:20] not sure though [05:21] BigBLue: if logged in as a sudo'able user i think you can sudo passwd [05:21] but im not sure [05:21] might need to do sudo passwd root [05:21] i dint [05:21] im a semi n00b myself, so not sure [05:21] didnt [05:21] just a lame sawce user [05:22] have no rooot power:( [05:22] i would just reinstall but i have not cd drive [05:22] (double) :( [05:23] Im just going to have to find a frigin flash drive [05:23] and copy a cd i think [05:24] i think "single user mode" will work [05:24] reboot, choose recovery mode [05:25] and when logged in i think you can edit roots password [05:32] i dont know how to get into recovery mode [05:32] <<<<<< supper n00b [05:37] BigBLue: press shift when grub loads [05:38] k [05:38] hold on ill try it real quick [05:38] its a dell distro so idk if it will work [05:40] idk if i have grub menu it just automatically goes to a ubuntu loading screen [05:41] dell raped me [05:41] please help my ass is bleeding [05:42] hello world [05:42] user many [05:46] The Plasma workspace keeps crashing on me for some reason, I'm not sure why. I thinks it's a bug. I'm running Platform Version 4.3.90 (KDE 4.3.90 (KDE 4.4 RC1)) [05:47] Here's a the backtrace of the latest crash: http://pastebin.com/m43be1159 === eric is now known as Guest60400 === ubuntu is now known as scottydelicious [06:49] ping? [07:05] The Plasma workspace keeps crashing on me for some reason, I'm not sure why. I thinks it's a bug. I'm running Platform Version 4.3.90 (KDE 4.3.90 (KDE 4.4 RC1)) [07:05] Here's a the backtrace of the latest crash: http://pastebin.com/m43be1159 [07:48] y [07:48] oppsie... wrong screen! :) [08:29] 今天天气不错 === zbenjamin|away is now known as zbenjamin [09:24] The Plasma workspace keeps crashing on me for some reason, I'm not sure why. I thinks it's a bug. I'm running Platform Version 4.3.90 (KDE 4.3.90 (KDE 4.4 RC1)) [09:24] Here's a the backtrace of the latest crash: http://pastebin.com/m43be1159 [10:17] hey guys, is there a debug package for kwin, like kwin-dbg? as I can't seem to find it and it's crashing 2-3 times a day and want to make a useful bug report =) [10:46] hi. does the firefox "Open containing folder" option work for anyone on KDE4? [10:46] poyntz: where in FF is that? [10:52] poyntz, on the file downloads? it opens nautilius for me [10:53] poyntz, but I have ubuntu-desktop and kubuntu-desktop installed [10:55] i got 1 notebook with 3 partitions 80gb each partition..my primary os is vista and 1 80 i'm plannin to install kubuntu....from 80gb can i still make partition to that in installing kubuntu? [10:58] pat|nG: Don't know what you mean, but better backup all the data on the partition you want to seperate to install ubuntu before and delete it - Ubuntu needs about 15-20 GB, and an additional 15-20 GB for your home and about 1-2 times the Ram for swap (depending on whether you want to use hibernation → more and how much ram you have → the more, the less need for swap) and maybe 200-500 MB for GRUB [11:01] what i mean is that i got a new dell notebook....250gb and i do make 3 partition 1 vista my primary OS.....and in my second partion i'm plannin to make kubuntu and 3rd gentoo.....from kubuntu partition can i still make another partition using the kubuntu livecd i've downloaded? [11:01] it's like in kubuntu os i got 2 partition same as in windows like i have c drive and d [11:02] jussi01: it's when you download a file and it opens a window. then if you right click on the file you can select "Open Containing Folder", but when I do nothing happens [11:02] pat|nG: Ah - of course you can do that, but unline on vista, you can't simply convert partitions (e.g. NTFS→ext4) but have to reformat it [11:02] JediMaster: ya. i deleted nautilus [11:02] jussi01: it's when you download a file and it opens a window. then if you right click on the file you can select "Open Containing Folder", but when I do nothing happens [11:02] poyntz: yeah, mines broken also. [11:02] gah [11:03] its really annoying [11:03] and dun see the point in having two file managers [11:03] * jussi01 uses chromium usually so doesnt notice [11:03] !chromium [11:03] You can get testing builds for Chromium at https://launchpad.net/~chromium-daily/+archive/ppa [11:03] !info chromium [11:03] chromium (source: chromium-bsu): transitional dummy package for chromium-bsu. In component universe, is optional. Version 0.9.14-1 (karmic), package size 13 kB, installed size 40 kB [11:04] !info chromium-bsu [11:04] chromium-bsu (source: chromium-bsu): fast paced, arcade-style, scrolling space shooter. In component universe, is optional. Version 0.9.14-1 (karmic), package size 122 kB, installed size 440 kB [11:04] lol, jussi? [11:04] poyntz: the first one [11:04] jussi01: mate it's a space game [11:04] !info chromium-browser [11:04] Package chromium-browser does not exist in karmic [11:05] The Plasma workspace keeps crashing on me for some reason, I'm not sure why. I thinks it's a bug. I'm running Platform Version 4.3.90 (KDE 4.3.90 (KDE 4.4 RC1)) [11:05] poyntz: one moment, I dont remember if its in karmic or noe, but you can always go grab the released chrome from google [11:05] Here's a backtrace of the latest crash: http://pastebin.com/m43be1159 [11:07] !bug [11:07] If you find a bug in Ubuntu or any of its derivatives, please file a bug using the command « ubuntu-bug » - See https://help.ubuntu.com/community/ReportingBugs for other ways to report bugs - Bugs in/wishes for the IRC bots (not Ubuntu) can be filed at http://bugs.launchpad.net/ubuntu-bots [11:09] poyntz: so is it possible? in kubuntu partition i can make 2 more partition? [11:11] !partition [11:11] For help with partitioning a new install see: https://help.ubuntu.com/8.04/switching/installing-partitioning.html - For partitioning programs see !GParted, !QtParted (!Kubuntu 8.10 and lower) or !PartitionManager (!Kubuntu 9.04 and up) - Other partitioning topics include !fstab !home and !swap === root is now known as Guest85064 [11:35] jussi01: ah. getcha. thanks for the tip [11:35] poyntz: :) [11:35] poyntz: the only issue I will point out to you is that printing is still an issue (i think) [11:40] jussi01: nah. i'm not going to try it. thanks anyhow [11:40] all the best [11:40] ciao === jelmer is now known as Guest13807 === Guest13807 is now known as _spark === orion_ is now known as Guest63451 [12:28] !netsplit [12:28] netsplit is when two IRC servers of the same network (like freenode) disconnect from each other, so users on one server stop seeing users on the other. If this is happening now, just relax and enjoy the show. See http://en.wikipedia.org/wiki/Netsplit [12:33] hello? [12:35] hello [12:35] anybody home [12:35] ? === jono is now known as Guest95190 === AllYourBases is now known as Guest30860 [13:11] apt-get install ubuntu-restricted-extras, is it correct to install codecs on kubuntu? [13:11] !netsplit [13:11] netsplit is when two IRC servers of the same network (like freenode) disconnect from each other, so users on one server stop seeing users on the other. If this is happening now, just relax and enjoy the show. See http://en.wikipedia.org/wiki/Netsplit === trucMuche is now known as Guest17170 === richard is now known as croxmeister === yofel_ is now known as yofel === Guest17170 is now known as trucMuche [14:02] how to i update my kdelibs from 4.3.2 to 4.3.60 [14:02] i have kubuntu 9.10 [14:03] hello folks [14:04] is there anyway to get a uninstalled app out of the main menu. [14:07] Is there a default password for root? I have just installed Ultimate 2.4 on my laptop and when in the terminal I do su - and my password and it gives authentication failure message. [14:08] use try sudo not su [14:09] tyr using sudo...no su [14:09] wow I can't type this morning === PR is now known as PR1 [14:11] Krezkey: WHy don't you delete the icon by hand? [14:12] I tried but will not work [14:13] some where I saw a menu cleaner or update tool but can't remember the name [14:13] ray_ did sudo work for you in the terminal ? [14:15] when i do sudo it goes through the usage characters and back to prompt no password prompted [14:15] Oh and does anyone else have a problem with Kopete adding unwanted friends folders to there list ? [14:16] what command are you trying to do ? [14:16] like sudo apt-get ? [14:17] yes [14:17] wow never had that happen to me....yet [14:17] but mostly want to run as root [14:18] running as root is not possible ...it's locked out [14:18] clean install no dual boot and ready to tweak [14:18] have to run sudo command to work as root under user [14:19] so i have to sudo before every command? [14:19] no, only ones that require root privileges [14:19] yes [14:19] for root commands [14:20] and what about in the gui when apps require root to perform certain functions? [14:21] your password acts ass root password for that ..If I remember correctly [14:21] alot of the drop down menu items will not work with out being root [14:21] sorry...type-o [14:22] it is like they are grayed out === zbenjamin is now known as zbenjamin|away [14:22] hello, in installation of kubuntu,i set "encrypt partition", now i migrated to another system, how do i unencrypt the data? [14:22] what app are you trying to run that is grayed out ? [14:27] ray_: what apps are grayed out in menu ? === mysa is now known as elMysa [14:28] I forgot how to hi-lite a response in here..:( === fmagno is now known as bombel [14:31] hi [14:31] hi slow-motion [14:31] hi Krezkey [14:32] hey slow....I forgot how to hi-lite a response in here...remind me please [14:33] type the name and what after it ? === albert is now known as shinrak === dendrobates is now known as dendro-afk [14:55] does anyone know of a menu tool for cleaning or updating the system menu ? [15:01] markus thanks I found the menu editor and got it out. [15:02] alguem ai fala portugues? [15:03] ray_> did you figure out the problem ? === TeLLuS_ is now known as TeLLuS === will_ is now known as Jaspion [15:10] i want to access my nokia N70 via usb... i m a kubuntu user and quite new to it. Plz help........... [15:13] rahul_ when you plug your camera in and turn it on do you see a prompt to the lower right of your screen === javier is now known as Toru [15:13] showing it was a new item found ? [15:15] no prompt shown [15:15] and its my nokia cellphone not camera [15:15] Oh ! [15:16] join #sss === dendro-afk is now known as dendrobates === dendrobates is now known as dendro-afk [15:19] some one plz help meee..... [15:19] i want to access my nokia N70 via usb... i m a kubuntu user and quite new to it. === dendro-afk is now known as dendrobates [15:27] hi! [15:27] i want to access my nokia N70 via usb... i m a kubuntu user and quite new to it. Plz help [15:27] what do i want to use for a encrypted folder in kde? gui appreciated but not necessary. [15:28] rahul__: what do you want to do? sync contacts? [15:28] no for images and music transfer [15:29] <_motti_> Hi guys. I have problem using beamer on kubuntu. When I run pdflatex or latex I get: Font T1/phv/m/n/10=phvr8t at 10.0pt not loadable: Metric (TFM) file not found [15:29] <_motti_> any thoughts? I'll post the problem also on the latex channel [15:31] rahul__: my nokia e65 (symbian s60 or something) can act as a usb stick, asks me as i plug it in, but there needs to be a sd card present [15:32] rahul__: if you aren't asked, you can set the behaviour somewhere in the menu of your cell [15:32] ubuntu: english only channel! [15:32] rahul__: if none of this works, try sending it with bluetooth. [15:34] hey does any one now of a way i can browse irc channel to find a better place to ask my real question [15:34] im looking for a channel for people also using a ps3 with a linux dist [15:35] KARMIC_PS3: what are you trying to do? stream media to it? [15:35] in my cell there is no such option shown [15:35] what to do [15:36] no just figure out how to get some programs working like qemu and a prog called megabox [15:36] rahul__: if it is a symbian, search your cells settings systematically (i guess starting with "connections" or something like that might do the trick) [15:38] plus if you two talking about cell phones know of any drivers i could use for my blackberry on ubuntu that would be helpful [15:39] KARMIC_PS3: i guess i'd try funambol [15:39] for the bb [15:40] right [15:40] googling for opensync and blackberry might be usefull to. if opensync 0.22 doesn't do the trick, got opensync 0.39 in my ppa [15:41] is there a way to browse thru existing channels on irc [15:42] well on irssi /list works, but that list is usually.. well HUGE [15:42] i tried that but it did nothing [15:44] not sure if this helps but I just hooked my motorola razor to kubuntu 9.10 and it found it a Volume (vfat) in dolphin [15:45] plus I got the new devices plugged in prompt in the lower right of my screen with it listed also [15:46] Im outa here...have fun folks === crissi_ is now known as CrissiD [15:48] opensync is that for just syncing contacts and appointments cause all i wanna do is access the micro sd [15:49] KARMIC_PS3: afaik just PIM data, got no black berry, so i've no clue [15:50] right [15:52] HIHIHI [15:52] how are you guys!!! [15:53] torkeh: drunk? ;) [15:53] no [15:53] (that was a question and a answer ;) ) [15:53] yeah, but thats not good [15:53] you will die badly :*( [15:53] makes me cry [15:53] omg ;) [15:53] because i love you!!!!!11 === bigjools is now known as bigjools-otp === bigjools-otp is now known as bigjools [16:32] hi. i'm running kubuntu 9.04, and it's asking me if i want to update to 9.10. do the two have different versions of KDE? [16:34] wie komm ich n ins euirc? [16:34] dende_: => #kubuntu-de [16:34] Nameless_au: yes they do. check the release notes for more details. === ilumi is now known as werfact [16:42] anyone else with a jabber.org account and trouble with kopete? [16:45] freinhard: not only kopete [16:49] http://www.jabber.org/ [16:52] alexis_: thx, checked some hours ago [16:52] check now then [16:52] ;) [16:52] the is some information about the troubles [16:53] they sould use a twitter-like service to keep the people uptodate why their client got disconnected for the 50th time today ;) === orion_ is now known as Guest22628 [17:26] I installed KDE 4.3.4 from backports on Ubuntu 9.10 on a Lenovo laptop, and I am trying to setup two external monitors (which works perfectly using nvidia-settings from Gnome), but the System Settings->Display option only identifies a single monitor. How do I setup multliple external monitors? === rider is now known as Guest45925 [18:17] hi [18:18] I wanted to install a program from source (to get a newer version). When running configure I got some warnings and not make-file. I installed some packages. Now I get no errors, but still no make-file. Can somebody help me? I put the output to pastebin [18:20] well, "no errors" is wrong, but no related errors I think [18:21] http://paste.ubuntu.com/359663/ [18:22] correct format http://paste.ubuntu.com/359665/ [18:23] i got the message "15 bugfixes aviable", but in my try, i doesn't see the updater-icon. How can i get it back? [18:23] rethus, open a shell an update with that [18:23] Matisse: i#d like to have a visible icon in my try [18:23] tray [18:24] how does it named? [18:24] rethus: run kpackagekit [18:24] in my tray it isn't always visible too, actually it doesnt happen anything if i click on that. I'm not sure if we mean the same icon [18:25] rethus: if there are no updates kpackagekit can't be show, if you want that to be changed then file a bug report but AFAIK there is no way to force kpackagekit to stay in your tray [18:26] before 30 seconds i got the popup-message 15 bugfixes aciable.. but there is no icon on tray [18:26] rethus, using shell commands is way better I think. Here is the command: [18:26] sudo apt-get update && sudo apt-get upgrade && sudo apt-get dist-upgrade [18:26] that will do it too [18:26] i know this commands, but i like the icon in my tray [18:26] :) [18:26] ok [18:28] rethus: find out if there are any updates available (via running kpackagekit manually), either a mistake was made when it turned up or when it disapeared [18:28] !ipv6 [18:28] For an introduction to IPv6 and information on tunneling IPv6 through IPv4 connections, see https://wiki.ubuntu.com/IPv6 | To disable IPv6 see https://help.ubuntu.com/community/WebBrowsingSlowIPv6IPv4 [18:29] so i wonder... there must be a way to get this symbol back. [18:30] rethus: nope kpackagekitsmarticon will neve stay in the tray if it doesn't think there are any updates, (you can check if its running using pgrep kpackage -l) [18:31] rethus, i think it comes back after a while if you run apt-get update, but I'm not sure. you could test it by that command [18:31] RiotingPacifist: like i say it before.... 2 times... i've got a notification that there are 15 bugfixes... and there is still "no" icon [18:34] if it doesnt come back, there might be something wrong with the notification [18:35] ive now update and upgrade and dist-upgrade... will see on next reboot :D [18:35] :) [18:35] yeah but either its disapeared for some reason (bug or you've told it to only update daily/weekly/something) or it was a mistake when it showed up (i think kpackagekit keeps its own cache so can become confused if you do any package management outside it until it updates itself) [18:40] yes, kpackagekit seems to have a different cache [18:42] If reduced my question to this: [18:42] Configure says "Error: you need to install the libbz2 library (for compression)" - how do I tell configure the correct path? (the package is installed) [18:48] necesito saber como update a kubuntu [18:48] pedi una pc hp y me llego con kubuntu pero no me deja ni ver youtube ni nada [18:48] Non hablamo espanol :) [18:49] try #kubuntu-es or #ubuntu-es [18:50] Matisse: how was libbz2 installed and where to? [18:51] I checked sudo apt-get install bzip2 and it says it has the newest version [18:52] and find found different places, f.e. /usr/lib32/libbz2.so.1.0.4 [18:52] muchos tacos y burrhitos, por favore [18:53] :D [18:53] and in /lib/ there are also 3 different versions of it [18:54] hi@all [18:54] RiotingPacifist, should have put your nick in front of my answers... [18:54] hi Oneill [18:55] RiotingPacifist, http://paste.ubuntu.com/359684/ === PeterFA_ is now known as PeterFA [18:57] Matisse: well if you had installed it yourself then maybe i'd have been able to help as it is i've got no idea, the file should be installed and working maybe the make script is broken [18:58] is there only an english channel or is there an german channel , sry for my directly question but i am new at ubuntu/kubuntu/xubuntu and i am from germany i have no problem with english but sometimes its a littly hard to be to understood =) [18:58] RiotingPacifist, I could remove the part in the configure script so that no error comes up. Is that a good idea? [18:58] Oneill, can ask me in german or better would be #kubuntu-de #ubuntu-de [18:59] thanks many Matisse [18:59] no no i dont want to leave the english chat but sometimes its better to learn in german =)° [19:00] Matisse: Not a good idea, but it may let you compile the software, I would give it a shot, but it would be better to figure out why it thinks you don't have libbz, is this a just 32bit install? [19:03] one thing is you don't have a /usr/lib32/libbz.so so sudo ln -s /usr/lib32/libbz2.so.1.0 /usr/lib32/libbz.so may fix the problem, but you shouldn't need to do that [19:04] RiotingPacifist, what is just 32bit? the lib seems to be 32bit and dfarc (the program to configure) should be compilable on both 32 and 64 I think [19:05] Matisse: well if your running a 32bit and 64bit sytem libraries get complicated [19:06] ehem how i join the #kubuntu-de channel i use Quassel IRC i never used IRC before =) did someone knows it ? [19:06] well, I have a 64bit pc [19:07] Oneill, install xchat, its much better :) [19:07] there you can do right-click and choose "join" [19:08] does xchat configure automatic it all the channels or have i install at my own ? [19:09] what do you mean? xchat has a long list of irc servers, but you still have to say which channel you want to visit [19:09] ah ok i understood i mean that Quassel offers me only #Kubuntu at first lunch thats what i mean [19:09] hi, can somebody explain me how to remap a touch of my keyboard using xbindkeys? [19:09] Oneill: there is nothing wrong with Quassel/konversation, to join a chan in any clinet just type /join #channel name [19:10] Oneill, it the same in xchat, debian and ubuntu are 2 server at the upper position [19:11] ah ok ^^ [19:11] How can I see the version in apt-cache search ? [19:11] Laeborg: i don't think you can, use apt-cache show or dpkg -l [19:11] Laeborg, do you mean apt-cache show ? [19:12] thanks :) [19:13] RiotingPacifist, might it be possible to get a 64bit version of libbzip ? [19:13] now i am testing xchat out ! i am back again on quassel when it work not i like =)° [19:13] :) [19:13] good choise! [19:15] Matisse: yes if your on a 64bit install thats what apt should install [19:15] RiotingPacifist, their homepage shows that it works for both 32 and 64 [19:16] so, I maybe just have to make a link into the 64bit directory... [19:16] Matisse: if you are compiling 64bit software you need the 64bit libs, if your compiling the 32bit you need the 32bit libs [19:16] while the software can be compiled on both, you cant mix and match libraries [19:17] Ah Hello Again i am Back on with Xchat now i knew 2 IRC Programs thanks you Matisse [19:17] "It should run on any 32 or 64-bit machine with an ANSI C compiler" [19:17] no problemo Oneill :) [19:17] Matisse: you can compile their C to either a 32bit binary or a 64bit binary but not both [19:18] yes, I see [19:18] the complete citation: "Because it's very portable. It should run on any 32 or 64-bit machine with an ANSI C compiler." [19:19] well then I have to compile the libbzip at first [19:19] or whatever [19:20] RiotingPacifist, how do I compile that without a configure script? [19:21] ok, there's a makefile... [19:22] I dunno, you can try invoking g++/gcc directly but the configure/make is generally needed to set everything up before the compile [19:22] make did work [19:23] RiotingPacifist, now, where do i put it with make install? /lib64 or /usr/lib64? [19:24] make did tell me how to do this. I think I choose one of it and make a link to the other dir [19:25] unless the lib is part of the core os needed to boot it goes /usr/lib64 (or 32, are you sure your running a 64bit kernel?) [19:26] no, I'm not sure... and doing sudo make install PREFIX=/lib64 seems to be a senseless decision [19:26] uname -a [19:27] yes, its 64bit [19:27] Linux Earthlings-Hope 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 17:01:44 UTC 2009 x86_64 GNU/Linux [19:27] well, first I have to undo that install... [19:28] Luckily every cp and mkdir is visible [19:29] it's fine in /lib64 but it belongs in /usr/lib64, unless it's used to boot the os or in system recovery where /usr may not be accessible (as both are probably on the same partition this is a moo point) [19:29] oh guys , my own people the germans in the ubuntu-de channel are so uncool and stupid and arrogant omg i dont belive i only ask a question about WINE and they dissed me , with no mercy !! i better let be here .. [19:31] Oneill: I gave up on wine. Found replacements for everything I need. And games with wine is a pain in the ass all the time. [19:31] Oneill, cant promise that it's different here :P [19:32] RiotingPacifist, but it creates a lot of subdirectories and in /lib there aren't so many directories... [19:33] make install without prefix would have put it in /usr/local/bin, /usr/local/lib, /usr/local/man and /usr/local/include [19:33] now I got these directories in /lib [19:38] RiotingPacifist, any idea what echo ".so man1/bzgrep.1" > /lib64/man/man1/bzegrep.1 does? [19:39] Matisse: it would make a file called /lib64/man/man1/bzegrep.1 with .so man1/bzgrep.1 in it. [19:40] ok, thx [19:54] well well well... seems to compile now [19:54] (also had to install g++...) [19:57] is there any way to optimize my cpu usage? it seems like only one processer will be used to full potential at a time. I have a AMD X3 8650 2.2 ghz. [19:58] according to the system monitor. [19:58] hi [19:58] ho [19:58] hello slow [19:59] no one? or is it perhaps that some applications will only use a single processor? [19:59] Dusque, install cpufrequtils , it gives some control over your cpu frq rate [19:59] thanks [20:01] how do I use it? [20:01] Dusque, i think thats a problem how the programs are compiled [20:02] I would agree, but if I'm using multiple programs then it should be evened out right? [20:03] Dusque, for using both cpus you need programs which are able to use both... but I dont know if where this ability is implemented, if its in the kernel or in the libs or whereever [20:03] Dusque, thats true... well I havent got experience with that [20:03] ok [20:03] brb === inetpro_ is now known as inetpro [20:09] hi kann mir jemand mit gnuplot helfen? bräuchte ein beispiel zu stacked bar charts [20:11] !de | bitmonster [20:11] bitmonster: In den meisten ubuntu-Kanälen wird nur Englisch gesprochen. Für deutschsprachige Hilfe besuchen Sie bitte #ubuntu-de, #kubuntu-de, #edubuntu-de oder #ubuntu-at. Geben Sie einfach /join #ubuntu-de ein! Danke für Ihr Verständnis. [20:11] oh sorry ... thought this was a german channel ... [20:11] is there a specific channel I should join for UNR? [20:12] linuxprobie: Possibly #kubuntu-netbook [20:13] Yah, I just dug it out o fthe chanlist just as you posted :-p [20:14] although I might as well ask my question here. Is there an easy way I can disable the ubuntu autologin without having to rebuild the live image? [20:18] is there a ppa for ktorrent? or a ppa with ktorrent in it? === crissi_ is now known as CrissiD [20:22] Dusque: no there is currently no ppa for KTorrent, but you should be able to install the beta or SVN version of it [20:22] i can guide you with compiling here if you want that [20:23] well, have you done it and is it any better? Not sure why but ktorrent keeps crashing for me. Or I start it and it just doesn't start. [20:23] stick to the faq in http://ktorrent.org/wiki [20:24] KTorrent keeps getting better and better [20:24] but for a torrent client it is important to use the latest version [20:25] thats pretty much what I was thinking. so your using the 4.0 beta? [20:25] my KTorrent does work here, it is quite stable too [20:26] I'm surprised it's not in the backports... [20:26] nope i use the svn version, but that too has the peerid and user-agent of the beta1 [20:26] hi [20:27] yeah, you should be able to request a backport at launchpad [20:27] ok, walk me through it please :D. Haven't done SVN stuff yet. [20:27] well, installing all packages does take some time because of the bandwidth needed [20:28] use this guide http://ktorrent.org/wiki/index.php/FAQ [20:30] you should deside whether you want to use the latest stable version or the development version [20:30] yeah, reading through it. [20:30] :) [20:30] sorry, did you say you are using the unstable or the stable version? [20:31] i use svn, so that would be the unstable version [20:31] but know that most private torrent trackers do not like unstable versions [20:31] most do not allow this [20:32] well, if I find that it doesn't work with my tracker then I will be able to remove it and go to the default right? [20:32] only open source downloads on trackers with open source material allow unstable clients [20:32] Dusque: correct [20:32] you should do $make uninstall then [20:33] ok [20:33] and svn co in a new folder [20:34] ok, lets do this [20:34] take your time... [20:37] does a svn work like a ppa? or will it need to be compiled each time one is released? [20:40] Dusque: no with svn you van check out revision numbers but also the latest version if you want too (i do recommend that) [20:40] hi all! can someone recommened a good torrent client? I am familiar with the old azurious [20:40] very cool [20:40] Dusque: each svn up need to be recompiled [20:40] ok [20:41] Zhenya: you should choose between qbittorrent, Ktorrent, deluge or transmission [20:41] Zhenya: Since Azureus is written in Java it works on any operating system which can use Java, that includes (K)ubuntu [20:42] martijn_: which one is the best one for n00bs in your opinion? [20:43] Zhenya: does not really mather i guess, just try them all, i cant's choose for you. Do a $sudo apt-get install qbittorrent deluge transmission ktorrent [20:43] Zhenya any of them will do for a newb. Check out the web sites and see what you like the looks of the best. If you are using a private tracker make sure your tracker supports it. [20:43] and for qbittorrent and deluge there might be newer versions on there website [20:43] their [20:44] Dusque: martijn_ : Thank you guys!!! kubuntu would not be same without this channel! and people like y'all! w00t! [20:44] you could add the getdeb.net repo and stay up to date with deluge very easily [20:45] actually, that will work with both qbittorrent and deluge. [20:45] Dusque: does it work a litte bit with compiling? [20:45] getdeb? [20:46] hi [20:46] anyone knows what might be causing "W: GPG error: http://security.ubuntu.com karmic-security Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key " ? [20:46] nah, nothing to compile. just go to getdeb.net install the repo with their .deb file and then go through the web site and download it, or it will be in your kpackagekit. [20:47] either way. [20:47] then when it gets updated and they add the update with getdeb you will get an update like normal with your system. [20:50] yeah, that is even easier Dusque you are right [20:50] I'm all about easy :D [20:51] \o/ [20:57] hello world [20:58] Are there alternatives to the standard KDE application-launching-menu, or for lack of a better term, "start" menu ? [20:58] MHz128: yes [20:59] MHz128: right click and change to classing style for exampel [20:59] or you can use lancelot [20:59] classic is nice... I thought there might be others [20:59] lets try lancelot [21:01] ailurus is a pretty cool program as well, although I wish it has more kde stuff. [21:02] how does Kwin compare (speed) to other window managers? ie. openbox? [21:03] MHz128: well [21:04] ummmm, kwin is a window/composition manager openbox is more of a desktop manager. [21:04] they can't really be compared. [21:04] Dusque: not really, you can use Openbox as Kwin replacement in KDE [21:04] really? [21:04] yes [21:05] really [21:05] openbox doesn't have any composition properties does it? [21:05] no [21:06] MHz128: biggest difference is small difference in ram usage (when no effects on) [21:06] ...yes, biggest difference is still just small difference, I don't see why to use Openbox (: [21:06] oh ic. Openbox seems to have a substantial speed increase when used with gnome as well [21:07] thats cause metacity is kinda crappy [21:07] interesting [21:07] MHz128: I haven't talked about speed at all, I haven't noticed any difference, and I'm not in powerful hardware (: [21:08] metacity does seem slower [21:08] plus it runs at a weird refresh rate. [21:08] Dusque, why is that? [21:08] like 50 instead of 60 [21:08] Tm_T, What hardware? [21:08] thats the default of metacity. [21:08] MHz128: ibook [21:09] what is ibook? [21:10] MHz128: this is old apple laptop with 256 MiB ram [21:10] ohh i c [21:12] Dusque: before i go to bed, does it work for you now? [21:12] actually I got totally side tracked. It's all good man. Have a good night. [21:13] I'll do with what I have for now. [21:13] :) [21:14] Is qy 4.6.1 packaged yet? [21:14] qt* [21:15] Omar87: not that I know [21:15] Omar87: you are in Karmic, right? [21:15] Tm_T: sure. === jhutchins_lt2 is now known as jhutchins_lt [21:37] Hi. I'm unable to run Wine because Wine wont create a configuration directory in my homedir. It says my homedir is not owned by me. [21:37] That appears to be true because the owner's name does not appear to be mine when I mount my homedir across NFS. [21:37] So I'm looking for a workaround -- preferably a Wine one rather than an NIS/NFS one. === ubuntu is now known as ubuntu_ === Guest30860 is now known as AllYourBases [21:42] n8 === zbenjamin|away is now known as zbenjamin [21:44] Does somebody here have advanced knowledge about installing GRUB2 for dualboot on an intel fakeraid? [21:45] Hello, i have installed kubuntu 9.10 x64 on my lap. I have problems when i try to reproduce mp3 mp4 etc and when i play youtube or any .flv video, the problem is i dont get any sound, i had installed kubuntu restricted extras and nothing happends, and im sure that my sound driver is working fine cuz i get the login sound so any one can halp me :P>) [21:48] kadko: What player are you using? Dragon? [21:49] Amarok [21:49] vlc [21:50] kadko: And you are playing the videos in your web browser? (Konqueror?) [21:51] i'm fine with firefox. [21:51] Yes but i can see only the video but dont get sound === PR1 is now known as piyush__ [21:53] And the rare thing is that this only happend's on KDE Enviromets because I had installed ubuntu and all was fine [21:53] kadko: Go to K Menu -> Computer -> System Settings -> Multimedia -> Backend tab [21:53] kadko: What options for backends are presented there? [21:56] Sorry whats or where is the backend tab cuz i have my os in spanish [21:57] kadko: There should be two tabs in the menu I am talking about, and Backend is second (right-side) tab. [21:59] thought that I have Xine and in the other part >>> is only selected DVD and down use_vo_driver [21:59] kadko: That's fine. I thought if there were another backend installed we could try to use that other backend. But you only have Xine. [22:00] Go to the other tab, which in English is called Device Preference. [22:00] Im there [22:00] In that pane, the topmost option is called Audio Output. What devices appear in the right pane when you choose Audio Output? [22:00] Hello, I cannot control things like youtube videos... I'm wondering if my flash player is the problem. [22:01] (List them in order please.) [22:01] HDA Intel ConexAnt Analog| HDA Intel HDMI output | Pulse Audio [22:02] kadko: Let's try making PulseAudio the preferred device, by dragging it to the top of the list. [22:03] Done [22:04] kadko: While we are in this menu, can you click the Test button, the one near the lower-right hand corner of the window? It has a black-and-white "play" symbol on it. [22:04] kadko: You should do that while PulseAudio is highlighted. [22:04] Yes the sound works [22:05] OK. Then click Apply (green check mark). Open your web browser, or kill it and then restart it if it is already running. Then try to play a Flash video. [22:05] okey [22:07] how can i get the PID for kill the proces? [22:10] LinusT: I killed the proces and open konkeror again but still no get sound [22:11] kadko: Hmm. Same problem in Amarok? [22:11] yes [22:11] kadko: I know you said the startup sounds work, but can you double-check your volume settings? [22:13] let me chek [22:15] LinusT: All seems to be fine [22:16] kadko: You could reboot now that you have changed your settings. After that, I am out of ideas. [22:16] okey let me try [22:21] when i connect a second monitor to my notebook, it only "clones" the screen? how can i have tow "independent" monitors, which gives my my desktop over 2 montiors? [22:24] LinusT: Tnx for the help it's working now :) [22:35] hello [22:36] I just tried to install kubuntu on my netbook, but it's not working, because the network device is not detected :( [22:36] it's a AR8132 === otswim is now known as babalu [23:14] Yser [23:14] is 4.4 RC2 release today? [23:16] hola [23:28] why does apt-get hold back packages when i tell it to upgrade all the time? [23:42] im having trouble compiling katephpbrowser-0.1beta, when im ./configure 'ing it. I get [23:42] "checking for KDE... configure: error: [23:42] in the prefix, you've chosen, are no KDE libraries installed. This will fail. [23:42] So, check this please and use another prefix!" [23:42] but i installed kde-devel package in ubuntu. Does anyone have an idea what im missing [23:42] andey: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation. [23:43] could it be that when you install gnome-desktop on kubuntu, you get some wierd reactions in terms of settings after that? [23:44] does kubuntu not use pulse by default? [23:46] i guess not. that's interesting [23:47] andey: it's a KDE3 app, so you need the KDE3 development packages like kdelibs4-dev [23:48] aww, he quit just before the answer arrived [23:49] tsimpson: Kids these days. So impatient ;) [23:50] oh well