tmktanyone have at hand a link to the solution to then 2-3 minute delay for my remote to start working when i start up mythfrontend? remember seeing an article about it, but can't seem to find it anymore01:01
tmktnever happened with v0.2101:01
Nighthawk82hey guys how can i make the tv channels on mythTV run better and not blotchy on a notebook?02:03
rhpot1991Nighthawk82: don't use wifi?02:08
rhpot1991get a notebook thats more powerful?02:08
rhpot1991its kinda a loaded question02:08
rhpot1991Nighthawk82: what kind of recordings, what are the specs on the notebook?02:08
Nighthawk82ok wasn't sure if there was some software that might have helped as also not sure if it's goes on settings when setting it up as i'm all new to linux thats all02:11
Nighthawk82ok won't use wifi then cool thanks02:11
jakenthrm... wondering if I can run mythtv in a vm and expect to see the tuner cards correctly02:22
tgm4883jakent, no02:46
jakentyeah, what I figured02:46
jakentguess I should buy a ow end machine for the tuner card, and leave my main machine on freebsd02:46
tgm4883yea that would work02:46
jakentdoes the tuner card go in the front end or the back end02:47
tgm4883jakent, backend02:48
jakentlol.. sucks... cause thats the one I wanted to stay freebsd... very few tuner card drivers on freebsd02:49
jakentI have a Hauppage 225002:50
jakentmaybe run the ubuntu-mythtv with the tuner cards front and back ends on the small machine, then run a masterback end on the freebsd ... not sure if that really makes a large difference... the freebsd machine is web server and NAS primarily02:52
reki don't hear any audio16:11
rek!help audio16:11
Zinn!help audio For a  complete list of my knowledge visit: http://www.baablogic.net/Zinn.cgi  Other available commands: !status, !about, !bug [bug_number].16:11
lime4x4anyone else have a problem getting a windows media center remote working with 9.10?17:53
lime4x4irw reports nothing when pressing buttons even thou the red led lights up on the receiver when pushing buttons18:49
Rob_Zthere is a known issue with 9.1018:56
Rob_Zthey yanked a bunch of things out from the kernel.18:56
rhpot1991lime4x4: nope both of mine work fine19:00
lime4x4if i run sudo mode2 -d /dev/lirc0 i get responces from the remote19:01
rhpot1991lime4x4: is your remote here: http://www.mythtv.org/wiki/MCE_Remote19:03
Zinn[www.mythtv.org] MCE Remote - MythTV19:03
lime4x4yes version 2 model 103919:04
lime4x4the remote worked fine in 8.1019:04
rhpot1991lime4x4: pastebin your configs in /etc/lirc19:11
rhpot1991I'll compare them with mine when I get a chance, eating in a few so you'll have to be patient19:11
lime4x4ok i'll let u know when there up there19:12
lime4x4here they are  http://mythbuntu.pastebin.com/m41b47a6119:15
lime4x4and thanks19:19
gbutterslime4x4: change remote device to REMOTE_DEVICE="/dev/lirc0" and sudo service lirc restart and you should be ready to go19:28
lime4x4ok i'll give it a try19:29
lime4x4nope still no joy19:31
gbutterslime4x4: remove everything after START_LIRCMD="" and try again19:37
gbutterslime4x4: nevermind I see that is the lircd.conf file not hardware.conf as i first thought19:39
gbutterslime4x4: what is the output of           ls /dev/lir*19:41
lime4x4/dev/lirc0  /dev/lircd  /dev/lircd119:45
gbutterslime4x4: pastebin /usr/share/lirc/remotes/mceusb/lircd.conf.mceusb19:46
zepheadHas anybody had success with the comcast Pace DC50X DTA boxes?  I recently got a USB-UIRT and cannot get it to transmit anything to the DTA...  It works (albeit marginally) with my motorola DCT222419:54
gbutterslime4x4: pastebin ~/.mythtv/lircrc19:55
gbutterslime4x4: 19 lines is all you have?20:00
lime4x4i think so let be double check20:01
lime4x4i'll have to find another way to view that file. I'm ssh into that box. give me a sec20:02
agoodmim having a strange issue with mythburn.py. if i use the gui to set my settings it dies straight away after going into the log viewer to watch the progress, however if i run it manually ie python /path/to/mythburn.py -j /path/to/mydata.xml -l /path/to/mythburn.log it works without issue or error, dvd plays fine etc20:06
Zinn!help For a  complete list of my knowledge visit: http://www.baablogic.net/Zinn.cgi  Other available commands: !status, !about, !bug [bug_number].20:15
gbutterslime4x4: if the file is approx 12000 bytes it should be OK. Looks like everything is setup correctly now if it is. One last thing you can try is rebooting. I got to run will be back later20:16
lime4x4yes it around that size20:17
agoodmargh havnt used ircii in so long20:19
scott__this is my first time setting up a a tv capture card i was just wondering if someone could point me in the right direction for corectly identifying my video device and default input options. I think the os picked up the card type as its showing the correct info under the probed info.20:21
agoodmrun lspci ensure the card is listed20:21
agoodmlook in /var/log/messages and try and see any messages related to the card, perhaps /dev/video* or /dev/dvb/something ivtv or v4l20:22
agoodmthat any help?20:23
scott__yes i found the card listed20:24
scott__sorry im kinda basic on this at this point, the trouble im having is that im not sure what the correct type for the input would be or which video device because it gives me two options /dev/video0 and /dev/video120:26
scott__and im not sure what i should be selecting for card type20:26
agoodmscott did you see the messages i typed before i lost connection?20:27
agoodmgood good20:27
scott__i believe so20:27
agoodmended with a long one basically saying look in messages log20:27
scott__look in /var/log/messages and try and see any messages related to the card, perhaps /dev/video* or /dev/dvb/something ivtv or v4l20:27
scott__<agoodm> that any help?20:27
scott__i found it both in /messages and lspci as hauppage HDPVR-1250 model 1196 and it shows up in messages as /dev/video1 and /dev/video020:30
agoodmah hdpvr, not something i know much about, but looks aok to me20:31
agoodmmplayer /dev/video0 then see if it plays, if not try video120:31
scott__alright ill get it a shot20:31
agoodm(run on a terminal in X20:32
agoodmit plays?20:32
zepheadhas anybody had success with the free comcast DTA boxes? (Pace DC50X)20:33
scott__oh no didnt get a chance to do it yet20:33
scott__brand new install20:33
scott__didnt have mplayer yet getting it now20:33
bcgrowni'm on mythbuntu 9.10...   when I open mythbrowser, any text boxes on web sites have black backgrounds.  how do I make them white so I can actually read what I type in?20:36
scott__mplayer comes up as a white box20:37
agoodmdoes the hdpvr have a source connected?20:37
mrandzephead: googling for dc50x turns up quite a few hits regarding lirc, mythtv, etc.  Might read over this: http://www.gossamer-threads.com/lists/engine?list=mythtv;do=search_results;search_forum=all;search_string=dc50x;search_type=AND&sb=post_time20:37
Zinn[www.gossamer-threads.com] dc50x20:37
scott__maybe i have it plugged into wrong source20:37
Zinn[www.mythtv.org] Hauppauge HD-PVR - MythTV20:38
agoodmmight need to experiment with the settings20:39
scott__wow lol ok now i get static20:39
agoodmhmm lol20:39
scott__ohh i didnt see the link sorry20:39
agoodmdo you need it again?20:40
scott__i didnt see it before i posted i mean20:40
agoodmooh right :)20:40
zepheadmrand: I've tried the .conf's from http://regx.dgswa.com/html/node/134, http://www.gossamer-threads.com/lists/mythtv/users/418412?search_string=dc50x;#418412, http://www.remotecentral.com/cgi-bin/mboard/rc-remote/thread.cgi?9104,http://www.mythtv.org/pipermail/mythtv-users/2010-January/278281.html, http://mythtv.org/pipermail/mythtv-users/2010-January/278281.html among others.... none work - they either don't respond (my USB-UIRT20:43
Zinn[regx.dgswa.com] How to get Comcast PACE DTA working in Myth in Ubuntu Hardy | regx.dgswa.com20:43
zepheaddoesn't do anything) or result in a lircd[9068]: segfault at 8 ip 0000000000420aab sp 00007fff7ee94830 error 4 in lircd[400000+2b000]20:43
agoodmif anyone has any input regarding my earlier mythburn issue thatd be appreciated20:45
zepheadmrand: it works great in winblows using irnhelper20:45
mrandzephead: I think I remember reading that some USB-UART's are problematic, but I couldn't point you to anything in particular.  Best I could suggest would be to loop back the serial port side and see if ubuntu at least handles that.20:45
mrandagoodm: nothing in the frontend logs?  If not, I wonder if there is a verbose level that could be turned up20:46
agoodmthere is stuff in the mythburn.log when run it from mythtv20:48
agoodmjust grabbing it now20:50
agoodmmythburn.py (0.1.20090139-1) starting up...20:51
agoodmQSqlDatabasePrivate::removeDatabase: connection 'DBManager0' is still in use, all queries will cease to work.20:51
agoodmFound 2 CPUs20:51
agoodmthen after that it starts a traceback....20:51
mrandtraceback would imply crash.... might be worth opening a ticket with that, assuming youre running up-to-date stuff (recently updated 0.22 autobuilds)20:53
agoodmright, but if i run mythburn.py from the console it works absolutly fine, dvd turns out without an issue20:54
mrandCan you tell if you're running with the same or diff arguments than the frontend launches with?20:54
agoodmunfortunately i cant see what command it runs, any idea how to see what options it uses?20:55
agoodmrunning python /path/to/mythburn.py --help tells me thers only like 2 options you can choose from...20:55
mrandThat is a strange place to bomb out, especially if it works when you call it directly.21:00
agoodmindeed :s21:01
agoodmis that mysql message related perhaps? ive seen loads of log things on the internet where they have that message but it bombs out later21:03
agoodmrandom unrelated question, how do i set what startup services ubuntu runs? equivalent of 'setup' command on centos21:07
mrandhttps://bugs.launchpad.net/mythbuntu/+bug/486233 doesn't seem to be related.  It's almost as if  PATH isn't defined when myth launches it.  I can't test it out on my systems at the moment.  Can you open a launchpad ticket with that log as the description?  Preferred way would be to do "ubuntu-bug mytharchive" and if it doesn't attach that crash message, add it yourself.21:07
Zinn[bugs.launchpad.net] Bug #486233 in Mythbuntu: “Mytharchive (myth 0.22 karmic) fails to import/export recordedmarkup”21:08
agoodmyou want me to set the pastebin url as the name of the ticket?21:09
mrandnope.  Please don't point to pastebin for any bug tracker... pastebin stuff expires eventually.  I'd say title of the ticket would be something like "mythburn crashes only when called from within myth"21:10
mranddon't know about setup on centos.  I typically edit stuff in rc.d, which can order stuff at startup21:11
agoodmre the $path thing, i thought this but looking at the python script there is a fail safe that puts some usual locations into the relevant variables in case PATH is blank... and my path prefix for relevant binaries is in that failsafe list21:12
agoodmright thanks for the help, im gonna /part now but iv created a bug report so we will see how far we get now :) enjoy your evening21:25

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!