| skuldGoddess | can anybody help me with spamassassin + postfix? | 00:51 |
|---|---|---|
| uvirtbot | New bug: #525109 in postfix (main) "while abort an installation process" [Undecided,New] https://launchpad.net/bugs/525109 | 01:41 |
| uvirtbot | New bug: #523862 in postfix (main) "package postfix (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1" [Undecided,New] https://launchpad.net/bugs/523862 | 02:51 |
| === dendrobates is now known as dendro-afk | ||
| === jasonb_ is now known as jasonb | ||
| ChmEarl | nam-myoho-renge-kyo | 07:26 |
| ChmEarl | ciao | 07:26 |
| sacarde | hi | 10:30 |
| sacarde | I try to configure xdmcp on ubuntu8.4server | 10:31 |
| sacarde | I installed xorg + fluxbox + xdm | 10:31 |
| sacarde | someone experienced with this? | 10:32 |
| Callum__ | http://repos.srb2.org/HNI_0079.JPG my baby | 10:39 |
| mealstrom | you should use some extra light sources or blink :P | 10:42 |
| Callum__ | heh, it doesn't stay there, I just pulled it out there to do a decent wiring job...notice you can | 10:42 |
| Callum__ | 't see much wires in that photo =P | 10:42 |
| Callum__ | they're all tucked around the nooks and crannies of the rack for maximum airflow and that shit...most of the time right now that rack sits in a toilet with a fan in it, it has to be there for the moment because we are moving it downstairs in the building in a couple of months time but we have to have SOMEWHERE to put it where we can minimize the noise | 10:44 |
| Callum__ | the loudest thing on that rack by far is the radio transmitter (the big thing up the top) | 10:44 |
| Callum__ | drowns out the servers, hard drive enclose and the signal exciter (machine below the transmitter) noise quite easily | 10:44 |
| Callum__ | enclosure* | 10:45 |
| Callum__ | http://repos.srb2.org/HNI_00030.JPG =P | 10:46 |
| Callum__ | http://repos.srb2.org/HNI_00020.JPG the UPS (1500VA) is under max load with everything turned on | 10:48 |
| Callum__ | the servers (and the computers being served by it) all run Ubuntu | 10:48 |
| Callum__ | those two machines running Server Edition 9.10, one running general-purpose 9.10 and two running Ubuntu Studio | 10:49 |
| mealstrom | nice, any portable diesel generator at backyard? | 10:49 |
| Callum__ | no unfortunately, we don't have the money for anything flash like that as we're a non-profit organisation with most of our equipment being donated =P the radio-related stuff is brand new though | 10:51 |
| Callum__ | however if power does go out, the UPS should hold everything for about 30 minutes.... I don't need so much time as I live pretty much 30 seconds away =P | 10:52 |
| mealstrom | we ve got 4 UPS 1000(VA) for about 2-3 hours with no power plugged. But when light goes away for 4 hours -- its disaster. And we cannot put there some diesel generator cos of "close distance to houses" too much noice at 2 a.m. or so | 10:53 |
| Callum__ | I see... we're the same, the radio station (where that rack is located) is in the middle of a shopping center | 10:54 |
| Callum__ | you would think with car engines being so quiet they'd have quiet generators too | 10:55 |
| mealstrom | my friend has got 2.4 kV generator ... it sounds like a tank | 10:56 |
| dotancohen_ | You can put a muffler on a generator | 10:56 |
| dotancohen_ | I don't know why they don't come with them, though | 10:56 |
| Callum__ | Yeah... | 10:57 |
| dotancohen_ | It doesn't kill the power really, but it is a bit expensive considering the cost of the whole thing | 10:57 |
| dotancohen_ | And it takes a bit of space, and it gets _hot_ | 10:57 |
| Callum__ | 2.4kV is somewhere between 5-10hp =P or something | 10:58 |
| dotancohen_ | By the way, car engines aren't really so quiet. Open the hood and pull some of the plastic away. If it's got a chain driving the cams, it's loud | 10:58 |
| mealstrom | yes. it is cheaper to buy another 4 UPS. | 10:58 |
| mealstrom | but we work with wood and there is some rules with fire protection. And we should put them backyard or something like that/ | 10:58 |
| mealstrom | car engines with air cooling ? ) | 10:59 |
| Callum__ | heh | 10:59 |
| mealstrom | they sounds like tank too ) | 10:59 |
| Callum__ | well, they're quiet considering what little cars do to drain the noise outside | 10:59 |
| Callum__ | generators could have endless amounts of soundproofing and exhaust muffling on them without any problems | 11:00 |
| maxagaz | how to check on which /dev is assigned my webcam ? | 11:00 |
| mealstrom | lshw -short ? | 11:01 |
| sacarde | can you help me to configure xdmcp on ubuntu-server? | 11:01 |
| maxagaz | mealstrom, no... | 11:04 |
| maxagaz | dmesg returns this : /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input10 when i plug it | 11:06 |
| mealstrom | g dmesg | less | 11:07 |
| mealstrom | oh | 11:07 |
| mealstrom | look here dev/v4l/by-id | 11:09 |
| mealstrom | /dev/ | 11:09 |
| mealstrom | and check /dev/video0 | 11:10 |
| Maleko | can anyone give me a iptable rule to limit the number of outgoing connection to particular ip destination | 11:34 |
| Davedan | can I rotate a log file maunally? | 11:53 |
| sacarde | can you help me to configure xdmcp on ubuntu-server? | 12:22 |
| twb | sacarde: X -query <terminal-server's-ip>, you're done. | 12:32 |
| sacarde | I try this | 12:32 |
| sacarde | but i dont view anythings | 12:32 |
| twb | And what did the logs say? | 12:33 |
| sacarde | I use ubuntuserver as server | 12:33 |
| sacarde | I configure xdm | 12:33 |
| sacarde | I view: netstat -an| grep xdm --------> port 177 is open | 12:33 |
| twb | You configured Ubuntu as the X server, or the app server? | 12:34 |
| sacarde | I install xorg on ubuntuserver | 12:34 |
| twb | OK, so xdm and all your apps are installed on the app server, right? | 12:36 |
| sacarde | yes | 12:36 |
| twb | What is the output from X -query <IP>? | 12:37 |
| twb | If it doesn't work, you should get some kind of error output | 12:37 |
| sacarde | X :1 vt8 -dpi 100 -query 192.168.1.3 | 12:38 |
| sacarde | _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 | 12:38 |
| sacarde | _XSERVTransOpen: transport open failed for inet6/arch64:1 | 12:38 |
| sacarde | _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 | 12:38 |
| sacarde | XDMCP warning: INET6 UDP socket creation failed | 12:38 |
| ivoks | argh | 12:38 |
| ivoks | ipv6 | 12:38 |
| sacarde | I blacklisted ipv6 | 12:39 |
| ivoks | there's nothing on vt8? | 12:39 |
| sacarde | no | 12:39 |
| twb | Why the fuck is it trying to use UDP over IPv6? | 12:39 |
| twb | sacarde: what version of ubuntu? | 12:40 |
| RoyK | sacarde: why did you install X on your poor server? | 12:40 |
| RoyK | why not? | 12:40 |
| sacarde | 8.4 | 12:40 |
| twb | RoyK: well, firstly because he's giving it an IPv4 address | 12:40 |
| twb | But I guess it might be because he's not -nolistening? | 12:41 |
| twb | sacarde: so "lsmod | grep ipv6" is empty? | 12:41 |
| sacarde | now, yes..... I try to load this module | 12:41 |
| RoyK | hm... yeah | 12:42 |
| sacarde | ah | 12:42 |
| RoyK | wierd | 12:42 |
| sacarde | in my client system..... I not have ipv6 | 12:43 |
| twb | sacarde: you need to look at your log files, on both systems | 12:46 |
| ivoks | X :1 -query localhost | 12:46 |
| ivoks | does that work on app server? | 12:46 |
| twb | sacarde: your basic technique is correct, so something must be misconfigured. | 12:46 |
| twb | ivoks: you're assuming there's an X server on his app server :-) | 12:47 |
| ivoks | i think ipv6 error are not errors | 12:47 |
| sacarde | how can I remove ipv6 from ubuntuserver? | 12:47 |
| sacarde | no? | 12:47 |
| twb | I agree, I suspect the IPv6 stuff is spurious. | 12:47 |
| twb | It usually is | 12:47 |
| sacarde | ah | 12:47 |
| ivoks | just notification that ipv6 isn't available | 12:47 |
| twb | (I ran off on a bit of an anti-ipv6 tangent before.) | 12:47 |
| sacarde | I try loading ipv6 in client too | 12:52 |
| sacarde | but I havent errors.... bu I dont view anythings | 12:52 |
| sacarde | but I read: | 12:53 |
| sacarde | XDMCP fatal error: Session failed Session 179920002 failed for display 192.168.1.20:1: Cannot open display | 12:53 |
| twb | sacarde: Xorg said that? | 12:54 |
| ivoks | that's an real error | 12:55 |
| sacarde | yes | 12:55 |
| twb | sacarde: is xauth installed on both ends? | 12:55 |
| sacarde | mmm | 12:55 |
| twb | sacarde: if you have firewalls, do they have the appropriate gaping holes? | 12:55 |
| sacarde | no firewall | 12:55 |
| twb | I wonder if it's worth just forcing a (non-XDMCP) remote connection, to test it | 12:56 |
| twb | X :2 & ssh 192.168.1.20 -f env DISPLAY=192.168.1.30:2 xlogo | 12:56 |
| twb | Where 192.168.1.30 is your X terminal | 12:57 |
| ivoks | bah | 13:01 |
| ivoks | Clustered snapshots are not yet supported. | 13:01 |
| ivoks | fsck | 13:01 |
| sacarde | Error: Can't open display: 192.168.1.20:2 | 13:01 |
| twb | sacarde: you're starting X by hand? | 13:08 |
| twb | sacarde: i.e. not via xdm, gdm, xinit, or anything else | 13:08 |
| sacarde | no | 13:08 |
| twb | Well, no wonder it fails, then. | 13:08 |
| sacarde | in runlevel 2 I start xdm | 13:08 |
| twb | All those wrapper things disable remote X for your protection | 13:08 |
| sacarde | ? | 13:09 |
| sacarde | I check hosts.allow and deny | 13:09 |
| twb | This has nothing to do with tcpwrappers | 13:09 |
| sacarde | no? | 13:10 |
| ehnde | anyone know of any good guide for lighttpd+sqlite+php ? | 14:03 |
| heath|OTG | Hello, I'm trying to learn / configure iptables as a router / gateway. So far I have the router set to accept ssh which is working fine and it allows traffic through from other machines on the network but I can't ping any outside address from the router itself | 15:30 |
| heath|OTG | it's as if eth0 doesn't pass it's traffic through to the wan eth1 | 15:31 |
| merianos | Hello . . . | 16:08 |
| Jeeves_ | heath|OTG: Have you configured NAT? | 16:08 |
| merianos | I need your help please . . . :) | 16:08 |
| merianos | I'm new on Linux and I use an ubundu desktop | 16:09 |
| merianos | I like to setup a system for development with LAMP | 16:09 |
| merianos | This part is already set it up | 16:09 |
| merianos | What I like to do now is to setup BIND | 16:09 |
| merianos | I want to use domain name for each of my local domain names | 16:10 |
| heath|OTG | Jeeves_: I had a bad DNS entry | 16:10 |
| merianos | Any person to help me please ? | 16:10 |
| Jeeves_ | heath|OTG: Ah, ok. | 16:10 |
| Jeeves_ | merianos: Just ask your question, and someone will help, or not | 16:10 |
| merianos | Ok then . . . | 16:10 |
| heath|OTG | merianos: you don't need bind for that just configure your host file if it is just for one machine | 16:11 |
| merianos | How to setup BIND for custom domain names in my localhost only, not shared domain names in my network | 16:11 |
| merianos | Ah ok . . . | 16:11 |
| merianos | where is located the host file in Ubundu ? | 16:11 |
| heath|OTG | /etc/hosts | 16:12 |
| merianos | and then how can I build Virtual Hosts for Apache ? | 16:12 |
| Jeeves_ | merianos: see /etc/apache2/sites-enabled/000-default | 16:13 |
| heath|OTG | you will need to create configs in /etc/apache2/sites-available. there should be a default | 16:13 |
| heath|OTG | once configured you enable it with a2ensite siteconfigfile | 16:13 |
| merianos | slowly slowly :) | 16:14 |
| merianos | I'm new on linux . . . | 16:14 |
| merianos | first day that I'm using it :) | 16:15 |
| merianos | Ok now . . . | 16:16 |
| merianos | I found the hosts file . . . | 16:16 |
| merianos | In example if I will use the domain www.testdomain.ext | 16:16 |
| merianos | how will I setup a virtual host on apache ? | 16:17 |
| merianos | in hosts I will add the record 127.0.0.1 www.testdomain.ext | 16:17 |
| merianos | what is the setup on apache for test ? | 16:18 |
| merianos | i mean the testdomain virtual host | 16:18 |
| merianos | Have I to make a copy of default file in /etc/apache2/sites-available and then rename it to the domain name I like to use ? | 16:21 |
| merianos | in www.testdomain.ext ? | 16:21 |
| merianos | and then enable it by using a2ensite www.testdomain.ext ? | 16:22 |
| merianos | Any help please ? | 16:24 |
| merianos | Somebody to help me ? | 16:25 |
| merianos | None ? | 16:28 |
| heath|OTG | merianos: that should work fine and remember to change the path to the web root | 16:28 |
| heath|OTG | merianos: please understand that must of us in here are working as well | 16:29 |
| merianos | :$ sorry :) | 16:29 |
| merianos | I try to paste the file and I can't | 16:29 |
| merianos | how to change the permisions ? | 16:29 |
| heath|OTG | sudo nano -w file_you_want_to_creat | 16:35 |
| tarvid | after karmic upgrade, i am battling named failure | 18:52 |
| tarvid | any hints on where to start? | 18:53 |
| tarvid | resolve queries from outside but not locally | 18:56 |
| tarvid | resolv.conf has nameserver localhost | 18:57 |
| tarvid | works with hard address | 18:58 |
| d4n1 | hey, how can i access the phpmyadmin page, is there supposed to be something inside www in /var/www? | 19:20 |
| qman__ | d4n1, the distribution phpmyadmin page is located elsewhere, but should be accessible with http://yourserver/phpmyadmin/ | 19:23 |
| d4n1 | qman__: well, ive tried that, which i expected to work, but it doesn't so i don't know if i did something wrong/ | 19:26 |
| qman__ | I don't have one accessible right now, but I believe it's in /usr/share/phpmyadmin | 19:26 |
| qman__ | and it should have created or modified your site config in /etc/apache2/sites-available | 19:27 |
| d4n1 | ok, if anything ill check sites-available out | 19:27 |
| qman__ | a lot of packaged web software works that way in ubuntu, such as torrentflux | 19:27 |
| uvirtbot | New bug: #525435 in samba (main) "utf-8 characters cause permission denied error" [Undecided,New] https://launchpad.net/bugs/525435 | 19:32 |
| uvirtbot | New bug: #525395 in backuppc (main) "Missing dependency to libtime-modules-perl" [Undecided,Confirmed] https://launchpad.net/bugs/525395 | 20:16 |
| tprankd | I'm using ircd-hybrid. I'm able to connect to 127.0.0.1, however when I'm trying to connect to a domain that points to the server IP, the connection is refused. How can I set it up so I can connect from an external computer? port 6667 is open | 20:33 |
| qman__ | tprankd, you probably have to configure the daemon to listen on your LAN IP | 20:39 |
| qman__ | if your machine is 192.168.1.5, try connecting to that from inside | 20:40 |
| qman__ | if it doesn't work, you have your answer | 20:40 |
| tprankd | hmm cannot connect to the lan IP | 20:46 |
| tprankd | How would I make it listen on .7? | 20:46 |
| VSpike | can anyone tell me when you should use vga= and when you should use video= on the kernel boot line? | 21:05 |
| VSpike | I can't find the right search recipe because they are both such common words | 21:06 |
| sherr | VSpike: I think vga= gives you a video "mode" i.e. resolution, and video= loads a video device driver | 21:16 |
| qman__ | tprankd, There should be a "listen" directive somewhere in the configuration file. Change it from localhost or 127.0.0.1 to your LAN IP, restart the service, and everything should work. | 21:21 |
| tprankd | qman__: Thanks! Do you know where the configuration file is for irc-hybrid? | 21:23 |
| tprankd | I was looking in /etc/irc-hybrid | 21:23 |
| qman__ | I don't know about that one in particular, but you're looking in the right places | 21:24 |
| qman__ | there should be a main config or a network config, something like that | 21:24 |
| VSpike | sherr: thanks | 21:26 |
| ChmEarl | using karmic 9.10 as VM manager, what size initrd.img is about right? its 7MB now. I need to rebuild it | 21:42 |
| ChmEarl | looking at initramfs.conf for hints | 21:44 |
| heynow | I've got a dell box t310 that 8.04 will not install on - doesnt find nic or the cdrom - however 9.10 installs well. If I install and configure 9.10 will i be able to upgrade to 10.4 and pin it there for the life of 10.4? | 21:54 |
| sherr | heynow: yes | 22:06 |
| VSpike | Hm. I had a booting box, and then I followed the instructions at http://harrison3001.blogspot.com/2009/09/grub-2-graphical-boot-tips-to-set.html and now it doesn't seem to boot | 22:15 |
| VSpike | I can get the grub menu (and it is at 1024x768 as I requested) but whatever boot option I use, or however I edit the kernel line, I get nothing after the grub output | 22:16 |
| VSpike | E.g. I'll get "Booting a command list" and perhaps a couple of lines about the initrd location and so on. After that, I have about 10 seconds of HDD activity and then nothing | 22:17 |
| VSpike | I suppose it's just possible that it may be booting, but I haven't got the networking up yet so I can't tell | 22:18 |
| VSpike | Any ideas how to fix? I'm stuck | 22:18 |
| marsje | hi | 22:20 |
| marsje | a friend of mine want to have a little home server but he also wants a multimedia pc... in one! | 22:21 |
| marsje | I myself use debian on my little server and ubuntu on my desktop | 22:21 |
| marsje | would ubuntu server be right for both? | 22:21 |
| marsje | can ubuntu server be upgraded to ubuntu desktop (or vice versa)? | 22:22 |
| AdamDV | marsje: Yes. | 22:23 |
| marsje | it's just a matter of aptituding the right packages, e.g.g gnome | 22:24 |
| VSpike | marsje: by the same token, you could install server components on the desktop version too | 22:27 |
| marsje | right | 22:27 |
| marsje | so actually there is no difference between ubuntu server and desktop besides the packages installed by default? | 22:27 |
| VSpike | marsje: i suppose the advantage of going with server is you can build a leaner system | 22:27 |
| marsje | yes, that would be better | 22:28 |
| AdamDV | Ughh | 22:34 |
| AdamDV | I hate it when compiz crashes. | 22:34 |
| VSpike | gah. this is driving me nuts | 22:38 |
| VSpike | Hm, quiet isn't it? Do most people normally here come while at work? | 22:39 |
| marsje | while "working"... :) | 22:49 |
| bogeyd6 | or you could issue the command "sudo apt-get install ambalamps" | 22:53 |
| camilla | hi! | 23:43 |
| camilla | i just installed ubuntu server and now i need to get ssh | 23:43 |
| camilla | how can i do that? | 23:43 |
| heynow | sudo apt-get install openssh-server | 23:44 |
| camilla | thanks! | 23:44 |
| heynow | np | 23:44 |
| camilla | this is my first server:) | 23:45 |
| heynow | google around for a server guide maybe lot's to do | 23:46 |
| camilla | i have found one | 23:46 |
| ChmEarl | virtio_net speed test: 300MB file from bare metal across 1Gbit netw to VM - 32MB/s | 23:54 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!
