=== styelz is now known as _styelz
[05:59] <ryan_b> !help
[05:59] <Zinn> !help For a  complete list of my knowledge visit: http://www.baablogic.net/Zinn.cgi  Other available commands: !status, !about, !bug [bug_number].
[06:02] <ryan_b> Hello, I am having a problem with my new HD-PVR.  I can watch live TV for about 15-30 seconds and then the entire system crashes.  Nothing but a hard boot will bring it back.  Same with recorded TV, only no crash.  Recording ends about 30 seconds in and nothin.  HD-PVR also requires a power cycle everytime this happens.
[06:03] <ryan_b> Interestingly, the system has also crashed while performing an update while vnc'd into the system.  Maybe its an X problem, but I can't find anything in the log to suggest that.
[06:04] <rhpot1991> ryan_b: well that sounds like a system stability issue then, try running memtest on the system
[06:05] <rhpot1991> you could try updateting your HD-PVR firmware as well, wont help if its a system issue though
[06:07] <ryan_b> Tried both already, mem-test ran clean over night and the HD-PVR came with the most up to date (1.5.6.1 I think) firmware.  Also, this is a recently converted system from Knoppmyth, in which I had no stability problems.  I just didn't care for LinHES so I decided to give Mythbuntu a try
[06:29] <ryan_b> ah well, thanks for the suggestions, it's been a long night, so I guess I'll pick back up later.
[12:46] <tmkt> hey hey
[12:46] <tmkt> in lucid what has powersaved become?
[16:18] <mazda01> anyone else experience slowed down computer (slow moving mouse) when burning a dvd? using brasero burning it only burned at 1.2x and it slows the entire system down. my free ram from 2gb is 356mb. is that why?
[16:19] <mazda01> sorry, wrong channel!
[17:21] <tmkt> in lucid what has powersaved become?
=== nwidger_ is now known as nwidger
[21:42] <tv_> umm, I'm using an older version of mythtv/mythubuntu. how do I see the myth backend error logs?
[21:44] <tv_> useing mythTV 0.21
=== tv_ is now known as avihay_tv
[21:46] <klucas> I've not used that version but are they not in /var/log/mythtv/mythbackend.log as they are in 0.22?
[21:48] <avihay_tv> umm, I don't know, but I'll check
[21:49] <avihay_tv> ya, it's there, thenks
[21:49] <klucas> no prob
[21:49] <klucas> :)
[21:50] <klucas> another trick is to use tail -f /var/log/mythtv/mythbackend.log while the backend is running will show what it's doing
[21:52] <avihay_tv> ok, I have a pvr150. I have problems watching live TV. here is the relevent log sniplet: http://mythbuntu.pastebin.com/wFJtuw6L
[21:53] <avihay_tv> I'm starting to think I set up the card as the wrong type. used v4L. should I use something else?
[21:55] <avihay_tv> ok, I'm guessing the mpeg-2 pvr-x50 should have gave me a hint
[21:56] <avihay_tv> but I even managed to scan for channles
[21:56] <klucas> well I'm not familar with that card specifically but I set up my PcHDTV HD-5500 as a dvb device
[21:56] <klucas> and it works like a charm
[21:58] <klucas> perhaps it would work for you as well as dvb?
[21:59] <klucas> have you had a look at http://www.mythtv.org/wiki/Hauppauge_PVR-150 ?
[21:59] <Zinn> [www.mythtv.org] Hauppauge PVR-150 - MythTV
[22:03] <tgm4883> i'm headed out the door, but avihay you need to set that up as a pvr-x50
[22:03] <tgm4883> klucas, it's not a digital card, so no dvb
[22:04] <avihay_tv> ya, thenks, I can get video signals but they are badly distorted
[22:06] <avihay_tv> this card worked on the previous mythcomputer without a flaw
[22:06] <klucas> true tgm4883, not a digital card.  I'm afraid I'm not sure what the issue is.
[22:07] <avihay_tv> it looks like bad syncing.. I've tryed two video sources (sat reciver and video
[22:07] <avihay_tv> well, atleast it's better then seeing nothing but not my much
[22:27] <avihay_tv> bahh, and the tuner isn't exacly working
[22:36] <avihay_tv> damn, tuner is showing nothing but snow
[22:36] <Zinn> avihay_tv: Please watch your language.
[23:57] <hipitihop> what is the standard transcode setup .. I can que a transcode job via mythweb but what format and settings are used and where does the transcoded file end up ?