[00:00] <upgrdman> airtonix, plugged in
[00:01] <airtonix> upgrdman, i assume line 3 is your vinyl cutter?
[00:01] <jkd4> could anybody tell me what "interactive editing control for GRUB menu" is?
[00:01] <nightsjammies> Okay, so I know that I can write songs to my itouch in rhythmbox in lucid, but I can't figure it out in karmic...any ideas?
[00:02] <steven_> what do i down load to use c++/c
[00:02] <genii> steven_: In what capacity are you proposing to use C++ ?
[00:02] <jkd4> could anybody tell me what "interactive editing control for GRUB menu" is?
[00:02] <upgrdman> airtonix, yes, line 3
[00:03] <steven_> to rewite 9.10 on my computer
[00:03] <airtonix> upgrdman, ok then i would try searching google for the pci-id : 0403:6001
[00:03] <Fopp|Newbie> Hi, can anyone help me with an issue with my bluetooth?
[00:04] <airtonix> upgrdman, unfortunatly i need to leave. sorry i cant be of more help.
[00:04] <upgrdman> ok thanks
 also i going to try to wright my own os
[00:04] <genii> jkd4: "interactive editing control for GRUB menu" is when you use the "e" key to enter editing mode for grub after you have used TAB or SHIFT key to hightlight one of the GRUB menu entries
[00:05] <jkd4> genii: is disabling it a good idea?
[00:05] <genii> jkd4: No
[00:05] <MaxHR> Hello, someone on here old me before about a method to download packages you need into an single file  using a windows computer (on broadband) for cases when the linux computer is on dialup, can someone repost that link?
 so what would you download for c++/c on there
[00:05] <Four20> guys i cant get ubuntu to work is this usable for lifetime windows users looking to see what linux has to offer
[00:05] <genii> jkd4: You can't put emergency boot options like "vga" or "acpi=off" for instance
[00:05] <jkd4> genii: this page http://www.zolved.com/synapse/view_content/27995/Top_Ten_basic_things_to_know_about_securing_Ubuntu say's its a good idea. What do you think of it?
[00:06] <racerd> maxhr | it's called a router
[00:06] <genii> jkd4: Lemme look and I'll get back to ya
[00:06] <nightsjammies> steven: try bluefish
[00:06] <dsnyders> So, any suggestions for editing mp3s other than audacity?
[00:06] <jkd4> genii: ok I'll wait here
[00:06] <steven_> ok
[00:06] <ukebane> MaxHR: when was that?
[00:07] <MaxHR> racerd: you misunderstand, I am on dialup only at home, I need to get the packages using a winxp laptop that can get on wifi elsewhere
[00:07] <MaxHR> ukebane: last week, I lost the site link
[00:07] <StopSign> what a pain in the a** to get amarok to play .mp3 lol
[00:07] <Pici> MaxHR: http://apt.alturl.com/ perhaps?
[00:07] <ukebane> know the exact day? there logs are on the website
[00:08] <Four20> if anyone can help me get basic functionality from ubuntu os pm me
[00:08] <nightsjammies> be more specific Four20
[00:08] <steven_> that for html i looking c++
[00:08] <genii> jkd4: The context of disabling GRUB editing there is correct. So if your system is perfectly set up you can disable it if you like. If you want to regain control over an itinerant box you may not wat to disable this however. Remember direct control over local console is required
[00:08] <MaxHR> Pici: this was something that was related to the package manager, where you could select the packages you wanted, and then choose an option to create a download script to use on windows
[00:08] <steven_> 4 20 wass up
[00:08] <Four20> i cant print my i cant get anything to dl thru sw center either
[00:09] <nightsjammies> there should be a mode in there for c+ etc..
[00:09] <steven_> ok
[00:09] <Pici> !ide | steven_
[00:09] <Four20> and i dont even know where to begin with drivers
[00:10] <MaxHR> ukebane: I don't recall exact day :(
[00:10] <50UAAGNUM> ubuntu is like living in an asylum where the inmates rule , erm ,or is that the United States Congress
[00:10] <steven_> ok  thank
[00:10] <Losha> MaxHR: I found this on google: https://help.ubuntu.com/community/Synaptic/PackageDownloadScript
[00:10] <Four20> i was able to get hplip sw but it wont work the printer
[00:10] <ukebane> that's probably it Losha
[00:10] <Losha> ukebane: it even mentions downloading on windows...
[00:11]  * kop_  submits wishlist to ubuntu developers " a dedicated phuck off button for when further development is not only unnecessary but redundant"
[00:12] <kop_> so what if the Eskimos have 200 words for snow ?! how many more ways can you say "perl" ?
[00:12] <MaxHR> Losha: righton, thx, good googling, I couldn't find it with the search I tried
[00:12] <Pici> kop_: Do you have a support question?
[00:12] <Losha> MaxHR: making google cough up the right info is (still) a black art...
[00:13] <kop_> I'm getting a little tired of the Burger King school of OS development . if just one more developer gives in to just one more whining compulsive bug submitter I swear I'll drop a cargo container of starving PCP/crack/meth crazed penguins on their ice cream and cake social
[00:13] <MaxHR> Losha: I wonder if that option exists in synaptic for other distros, or if its custom version in ubuntu...
[00:13] <kop_> Pici, sry I'll stfu now , just a bad day
[00:14] <Losha> MaxHR: the basic principle should apply to any packaging system, but the details will be horribly system (and possibly even release) specific...
[00:14] <ukebane> Oh I have a question, when did they strip xchat's appearance customization? I remember it being much more flexible
[00:15] <erUSUL> ukebane: maybe you have xchat-gnome and not plain xchat?
[00:15] <steven_> wine not working i cant play wow or d&donline or nothing words can install to it plz help me
[00:15] <NetScr1beGhosted> how to change default setting for built-in microphone so it's not muted?
[00:15] <ukebane> erUSUL: there we have it, thanks mate
[00:15] <Losha> kop_: bad day support is on #ubuntu-offtopic...
[00:15] <Fopp|Newbie> Hi guys, my bluetooth doesn't seem to work. The help said I had to install gnome-user-share. I've now done this, but I still can't get it to work. Any help would be great, thanks.
[00:15] <snxs> hello, im experiencing real slow Internet connection, are there any process running on ubuntu that are bandwidth hogs? or something like that?
[00:16] <kop_> Losha, but I try to appeal to the masses :D
[00:17] <ukebane> snxs: System -> Administration -> System Monitor
[00:17] <Losha> snxs: Once you've used what ukebane said above to find and stop everything running that you don'know of, then use your browser to run some speed tests.
[00:18] <Four20> please yall i just need to know where to begin with this i dont know or understand the os infront of me
[00:18] <snxs> ok will do
[00:19] <Typos_King> Four20:    how about getting a book? :)   that'd help hehe
[00:19] <genii> !cli | Four20
[00:19] <ukebane> !topic has a FAQ in it
[00:20] <Losha> Four20: smoke less, and start here: http://linuxowns.wordpress.com/2008/11/11/ubuntu-the-absolute-beginners-guide/
[00:20] <Four20> thanks guys ill lookt at that stuff and then go from there
[00:21] <xp> hi
[00:21] <Typos_King> allo xp
[00:21] <xp> allo typos
[00:22] <xp> how are u ?
[00:22] <Typos_King> I'm sitting :)
[00:22] <steven_> can someone help me
[00:22] <xp> good )
[00:22] <Typos_King> defying gravity
[00:22] <steven_> wine notworking
[00:23] <steven_> xp:can you help me
[00:23] <ringer> hi - just installed ubuntu. Am using chrome browser and trying to paste a url into a google document. I can't seem to be able to copy (from the chrome url window) and paste (into the gdoc).
[00:23] <xp> what ?
[00:23] <xp> say what u want lets try
[00:23] <Typos_King> steven_   soooo, ask... I don't have Wine installed... but someone might know/answer :)
[00:24] <steven_> xp:wine notwork i download a d&Donline but i cant install it
[00:24] <Typos_King> a google document?  what's that?
[00:24] <xp> use shell
[00:24] <ringer> google docs
[00:25] <Fopp|Newbie> Hi guys, my bluetooth doesn't seem to work. The help said I had to install gnome-user-share. I've now done this, but I still can't get it to work. Any help would be great, thanks.
[00:25] <steven_> i have google it and nothing
[00:25] <pabelanger> Anybody know of a PPA running a custom kernel?  I want to check out the .deb packaging
[00:26] <Typos_King> steven_   ....   maybe try... well... dunno...I know it has a frontend called  'wine doors' -> http://lh6.ggpht.com/cooldudevamsee/SJIFkpVN9VI/AAAAAAAAAR4/x4_l-O4DGis/wine-doors.png
[00:26] <Typos_King> not sure if that'd help, but :)
[00:26] <Maletor> My display shows stair stepped gradients and for the backgrounds of movies (not the focus - that looks beautiful) looks fuzzy. Can I use different NVIDIA drivers or do some sort of tweaking to make this look better?
[00:27] <Maletor> I think it may be my display, although it could just be the way my xorg.conf is configured....
[00:27] <Typos_King> Maletor:   check under Drivers > restricted drivers, there may be one for install from nvidia
[00:27] <steven_> no but thank for trying i been at this for almost 2 days now and nothing
[00:27] <Maletor> Typos_King: I have that installed and activated
[00:28] <aj_> i messed up...i need to reset file and folder permissions on my home folder to their defaut settings.  can someone help with that please?
[00:28] <flanders> hi
[00:28] <Typos_King> Maletor:   sooooo.... anything you can poke in nvidia-settings?
[00:28] <Maletor> nvidia-settings is all pretty standard Typos_King
[00:29] <steven_> wine notwork i download a d&Donline but i cant install it to wine plz help me
[00:29] <steven_> brb
[00:29] <CrazyDoode> Question: I'm looking for *nix laptop users in Toronto and their experience with logging on to Toronto Library network... pm me -
[00:29] <steven_> ok i back
[00:29] <Typos_King> Maletor:   could it be the resolution? ... or maybe even your theme.... try changing resolutions maybe, and changing back
[00:29] <mattgyver> Steven, maybe related to the Windows Version of the application?
[00:30] <Fopp|Newbie> Hi guys, my bluetooth doesn't seem to work. The help said I had to install gnome-user-share. I've now done this, but I still can't get it to work. Any help would be great, thanks.
[00:30] <flanders> I just lost output to headphone jack today.  Howi can I get it back? (Note: manually explicitly directing audio-out to headphones works... but that kills all output to the speakers)
[00:30] <Maletor> Typos_King: my res is 1920x1080 p which is max for my display
[00:30] <Maletor> I think it's just that my display Insignia 42" 1080p is just not that great, could that really be it?
[00:30] <steven_> give one sec to see if that it
[00:30] <netscr1be> thanx all
[00:30] <Camaro_09> I've been seeing these apps in the iPhone app store that you can controll your windows computer through your iPod. Is there one for ubuntu?
[00:30] <Typos_King> Maletor:   sooooo.... lower it and then back up, see if the drivers just need a jolt
[00:31] <Maletor> Typos_King: I have done that before
[00:31] <mattgyver> steven_, its possible if that doesnt work its still related but you need to tweak some more settings.
[00:31] <Typos_King> I see
[00:31] <mattgyver> steven_, add the application path in the 'applications' tab and play around with some of the options
[00:31] <steven_> ok
[00:31] <MrPiracy> where is the normal location of the applications installed in karmic
[00:31] <MrPiracy> ?
[00:32] <mattgyver> steven_, just make sure the application is highlighted after adding it, so that your changing application specific options
[00:32] <VCoolio> MrPiracy: executables in /usr/bin, launcher in /usr/share/applications
[00:32] <deilwen> i seem to have lost my volume control of the main bar, how can I get it back
[00:32] <MrPiracy> VCoolio: thx
[00:33] <steven_> but why can i install D&D online
[00:33] <mattgyver> deilwen, right click the panel, select 'add to panel' i think its listed as volume control
[00:33] <Soshi> Hello all, I'm new to linux and I was wondering if someone wouldn't mind fielding a question regarding mounting volumes
[00:33] <VCoolio> MrPiracy: or sometimes /usr/local etc, esp. when you compile without specifying prefix
[00:33] <steven_> i sould not have tiw it at all
[00:33] <Camaro_09> Is there an app to controll your ubuntu computer through your iPod?
[00:33] <Typos_King> Maletor:   tried giving xserver a jolt too?    sudo dpkg-reconfigure xserver-xorg;
[00:33] <greezmunkey> MrPiracy: look here: http://linux.about.com/od/ubuntu_doc/a/ubudg24t2.htm
[00:33] <deilwen> mattgyver: its not their m8
[00:33] <eremite> !ask | Soshi
[00:33] <MrPiracy> VCoolio: i downloaded an application and it works just by clicking its main script, i was wondering where to put it
[00:34] <Maletor> Typos_KIng: ya i have reconfigured xorg.conf back to default settings, but not with that command per se
[00:34] <mattgyver> deilwen, doh, your right
[00:34] <VCoolio> MrPiracy: somewhere in your path, check with 'echo $PATH' for your options
[00:34] <steven_> mattgyver: thank you man i been at this for 2 days now
[00:34] <deilwen> mattgyver, its a dam nuisance
[00:34] <mattgyver> deilwen, i know ive seen it somewhere, im poking around.  I swear it use to be there in 9.04
[00:35] <Typos_King> Maletor:   .. maybe give that a shot..... you might need to look for a better driver... there should be some generic ones I'd assume
[00:35] <VCoolio> MrPiracy: if you are the only user, put it in a user folder that is in your path; you can add folders to your path in ~/.bashrc if you wish
[00:35] <jordy240_> hi! can some3one help me fast please! how can I open a remote support invitation from someone in windows XP in ubuntu?
[00:35] <Soshi> Ok. system is linux-usb drive, windows computer. booted into linux drive, when I type fdisk -l to identify partitions to mount using the mount command, I get a response indicating a number of partitions, several of which have "unknown" file systems, and none of which have NTFS as the file system. What am I doing wrong to mount the win7 disk?
[00:35] <MrPiracy> VCoolio: too many options, where would u put it? it comes in a folder with a bunch of files, then i will want to add a shortcut to it on the menu INTERNET
[00:35] <Maletor> Maybe a proprietary one? So you are sure it's not the display?
[00:35] <deilwen> mattgyver: I know, I am using the latest beta
[00:35] <VCoolio> MrPiracy: but most of he time people put it in /usr/bin
[00:35] <Camaro_09> Is there an app to controll your computer through your iPod?
[00:35] <VCoolio> MrPiracy: oh wait
[00:36] <Typos_King> !lucid
[00:36] <VCoolio> MrPiracy: it will need the folder with the bunch of files it's in I guess
[00:36] <MrPiracy> VCoolio: yes
[00:36] <MrPiracy> VCoolio: it works if i make a link and drag it to the desktop
[00:36] <eremite> Soshi: open a terminal and type  sudo fdisk -l   it should ask for your password, so enter your password.  Then a list of your partitions should appear.
[00:37] <VCoolio> MrPiracy: put the folder where you like it; then right click the menu, click edit menu, then add the path to the file that launches it in internet
[00:37] <jordy240_>  hi! can some3one help me fast please! how can I open a remote support invitation from someone in windows XP in ubuntu?
[00:37] <Typos_King> Camaro_09   the whaaa?
[00:37] <eremite> Soshi: Applications > Terminal
[00:37] <Soshi> eremite: it does appear, but they don't recognize the file systems
[00:37] <MrPiracy> VCoolio: ok, trying that, hang on
[00:37] <mattgyver> deilwen, try adding 'notification area'
[00:38] <mattgyver> jordy240_, I dont know if you can, but perhaps you can connect to them directly with terminal server client?
[00:38] <Camaro_09> I've been seeing apps in the iPhone AppStore to controll your windows computer through your iPod. Is there one to controll ubuntu?
[00:38] <histo> Camaro_09: look for an ssh app
[00:38] <histo> Camaro_09: or vnc
[00:38] <Camaro_09> Ok
[00:39] <histo> Camaro_09: ssh would get you a shell login. VNC would get you graphical desktop
[00:39] <linxeh> you can get a graphical desktop over ssh too though (with X11 forwarding or whatever)
[00:39] <Camaro_09> Ok
[00:40] <dsnyders> Hi all!  Audacity plays about 2-3 secs of my mp3 (if that) then stalls, What gives?
[00:40] <mattgyver> Camaro_09, vnc is a pita to setup, but this should get you going; http://ubuntuforums.org/showthread.php?t=363236&highlight=vnc
[00:40] <NetScr1be> trying again due to ghost nick issues
[00:40] <NetScr1be> how do I change the default microphone setting so it is not muted
[00:41] <mattgyver> NetScr1be, cant do it under Sound Preferences>Input?
[00:41] <Typos_King> dsnyders:   I'd say remove, purge, reinstall
[00:42] <dante123> hi all, I have automatically login enabled and everytime I boot computer I have to enter keyring password, anyway to avoid this (always allow or something)??
[00:42] <NetScr1be> A new install defau;ts to microphone muted (Ubuntu netbook Remix)
[00:42] <MrPiracy> VCoolio: ok, i put it in /usr/bin and created the shortcut in menu ... seems to be working
[00:42] <MrPiracy> VCoolio: tyvm
[00:42] <histo> jorik: you can't get the invitation but you can connect with terminal server client under app > internet
[00:42] <Soshi> @Eremite Fdisk -l successfully lists my partitions but I can't identify/mount them without being able to recognize one as NTFS, and the online resources I've seen suggest that it should recognize ntfs instead of listing as unknown, which is the issue
[00:42] <histo> jorik: you just put in their ip
[00:43] <eremite> NetScr1be: try adjusting your alsamixer settings?
[00:43] <Camaro_09> I think I found the perfect one. In the screenshots, it shows the iPod controlling the ubuntu desktop
[00:43] <eremite> Soshi: that's odd.  Let me see if I can find some info for you.
[00:43] <NetScr1be> mattgyver, I changed it manually but I don't know if it stayed that way - checking now
[00:44] <VCoolio> MrPiracy: if that succeeds, you'll have created a launcher (.desktop file) in ~/.local/share/applications, which is one of the folders where the menus take their apps from
[00:44] <mattgyver> NetScr1be, im not too familiar with net remix, though its probably not different.. i would think it would retain the setting
[00:44] <PepinYaco> hi guys
[00:44] <Typos_King> Soshi:    what's wrong, I assume your linux-usb distribution doesn't have any ntfs filesystem drivers or so, maybe is kernel 2.4? or just needs the ntfs-config package, dunno
[00:45] <NetScr1be> it stayed unmuted
[00:45] <genii> Who the hell runs a 2.4 kernel at this point?
[00:45] <Soshi> @typos_king I'm new to linux, so I'm not actually sure how I would go about getting & installing the config package
[00:45] <MrPiracy> VCoolio: it is on the menu now and i am adding it to awn
[00:45] <NetScr1be> mattgyver, thanx
[00:45] <leagris> Camaro_09, :) I prefer my camaro here: http://one.ubuntu.com/p/Dc/
[00:45] <mattgyver> NetScr1be, np :)
[00:45] <VCoolio> MrPiracy: not really necessary to put stuff in your system part, but if you're not too picky on permissions default linux behavior it's all your call ;)
[00:46] <leagris> Camaro_09, this will help me test ubuntuone sharing if you tell me you can see it :)
[00:46] <Typos_King> Soshi:    I'd rather suggest you get  something kernel 2.6.20 or so... why not use a live-cd like say an ubuntu one, which has ntfs-3g drivers and all?
[00:46] <eremite> Soshi: open Synaptic package manager and search for ntfs-config.  SYSTEM > ADMINISTRATION > SYNAPTIC PACKAGE MANAGER
[00:46] <Camaro_09> I cant, it won't load for me
[00:46] <Typos_King> Soshi:    and what are you in the end, trying to do?   access the winxp?
[00:46] <MrPiracy> VCoolio: uh oh ... now the application is frozen ... doesnt shut down
[00:46] <ukebane> Soshi, or alt F2 -> sudo synaptic
[00:46] <NetScr1be> Soshi, sudo apt-cache search ntfs
[00:47] <ukebane> MrPiracy, run xkill and click the frozen app
[00:47] <MrPiracy> VCoolio: would that be the permissions in /usr/bin? i had to use sudo nautilus from terminal in order to be able to write to this folder
[00:47] <eremite> ukebane: he's new to linux, trying to help him avoid the terminal at all costs to make thinsg easier.
[00:47] <VCoolio> MrPiracy: what application is it? and try to run the file from a terminal and see if there is useful output
[00:47] <Typos_King> Soshi:    and what are you in the end, trying to do?   access the winxp?
[00:47] <Soshi> @multiple, I will try that thanks. and @ typos, I'm trying to mount my win7 drive so I can manipulate it from the linux-usb OS and learn linux without switching fully
[00:47] <VCoolio> MrPiracy: always use gksudo for nautilus and gedit and other graphical apps
[00:47] <Typos_King> multiple? hhehe
[00:48] <Camaro_09> Leagris, but im on my iPod, so that might be why it didn't work
[00:48] <Roasted> Has anybody had any weirdness with Network Manager? I was at work earlier sitting RIGHT next to an access point with 100% signal, and I dropped connection. I dropped connection two or three more times that morning. I come home, power on laptop, and haven't lost a connection in 5 hours that I been on it.. Wow???
[00:48] <Typos_King> Soshi:    well... you can get .... why not use the ubuntu live-cd?
[00:48] <eremite> Soshi: I also suggest WUBI for doing that exact same thing, but without a USB drive.
[00:48] <leagris> Camaro_09, it is my 79 camaro berlinetta docked :)
[00:48] <MrPiracy> VCoolio: it's secondlife from www.secondlife.com
[00:48] <Cial> So ubuntu doesnt seem to be detecting my Hard drive
[00:48] <Typos_King> Soshi:    that has ntfs read/write drivers access
[00:48] <Camaro_09> Nice
[00:49] <Soshi> Eremite: I was looking at that, maybe I will try it to be easier. @ typos live CD is non-permanent, where on a usb drive I could get a little bit of sticking
[00:49] <MrPiracy> VCoolio: it has some a lot of bugs, so no biggie
[00:49] <Soshi> anyways, off to grab Wubi I guess
[00:49] <Fopp|Newbie> Hi guys, my bluetooth doesn't seem to work. The help said I had to install gnome-user-share. I've now done this, but I still can't get it to work. Any help would be great, thanks.
[00:49] <VCoolio> MrPiracy: ok, know nothing about that; try to put it somewhere in your user part of the file system (don't use sudo now; just copy), then change the path in the menu and try again
[00:49] <NetScr1be> Roasted, you may have been too close to another WiFi on the same frequency?
[00:49] <eremite> Soshi: Wubi or get VirtualBox and install Ubuntu to that.
[00:50] <MrPiracy> VCoolio: i'll restart and see if it works first, brb
[00:50] <Roasted> NetScr1be, No... I set up the wifi network at work. It's the only network there, and all of the APs are on different channels. There shouldn't have been any confusion.
[00:50] <NetScr1be> Fopp|Newbie, what version of Ubuntu
[00:50] <Fopp|Newbie> 9.10
[00:50] <dtcrshr> hello everyone! i got a dual boot notebook, xp and ubuntu. On xp i can use my sony dv camcoder with a firewire cable and voilá! i can capture, use as a webcam... is there a way to do this on ubuntu?
[00:50] <Roasted> NetScr1be, unless for some reason the controller shut me off the wireless for load balancing purposes for the mobile lab of 30 laptops 2 rooms down. But that building is made of lead, I doubt they could even see the AP I was sitting next to when I lost connection.
[00:50] <Soshi> @eremite, forgive me if its a dumb question, but will virtualbox let me run ubuntu inside windows (in a window itself?)
[00:50] <NetScr1be> Fopp|Newbie, 9.1 bluetooth is much better than 9.04
[00:50] <dtcrshr> tryed kino, cheese
[00:50] <dtcrshr> no sucess
[00:51] <Fopp|Newbie> i hope so... sadly, it's not working for me right now
[00:51] <dante123> Soshi yes
[00:51] <Mathuin> What sort of apps out there can stress my 3d card?  I am testing my desktop to possibly run Ubuntu.
[00:51] <dante123> Mathuin what is your graphics card?
[00:52] <mattgyver> Mathuin, folding@home
[00:52] <eremite> Mathuin: games. 3D games push graphics cards.
[00:52] <NetScr1be> Fopp|Newbie, what,exactly is not working?
[00:52] <Mathuin> eremite: any games in particular?
[00:52] <Typos_King> Soshi:   yes, virtualbox is just like vmware
[00:52] <NetScr1be> Fopp|Newbie, not working how if you prefer
[00:53] <Mathuin> dante123: I don't remember, waiting for the CD to boot :-)
[00:53] <Fopp|Newbie> well, I try to turn it on, but nothig happens. I guess it's not working at all. Despite being fine back when I ran windows.
[00:53] <ZykoticK9> Mathuin, for benchmarking with Quake3, UT2004, or Doom3 see http://sites.google.com/site/alucidfs/gaming/benchmarks
[00:53] <NetScr1be> Fopp|Newbie, it should come on automatically when your bluetooth adapter comes up. What hardware?
[00:54] <Fopp|Newbie> Ooh, that's a ough question I'm afraid. I'll find out and ge tback to you.
[00:54] <Typos_King> Soshi:   then again.. the installation hassle won't be less than a full regular instalation, in fact it may even be more since it'll be more overhead, the OS the virtualnbox, configurations for it...... just make a partition, install it, and later decide, you can always remove or reuse a partitoin you know
[00:54] <Mathuin> dante123: GeForce 8800 GT.  I used to play WoW, then got better.
[00:54] <dante123> should run well under ubuntu Mathuin
[00:54] <Soshi> @typos I think I think I am going to just go Wubi
[00:55] <leagris> Camaro_09, alternatively here http://www.noiraude.net/img/CamaroBerlinettaAuGarage.JPG I guess ubuntuone MIME header is quite special
[00:55] <dante123> Mathuin I play cod1 and cod2 under wine in ubuntu
[00:55] <dante123> run well
[00:55] <eremite> Mathuin: Alien Arena, Nexuis, Wolfenstein ET, Urban Terror etc.  Maybe even somethimng like Second Life.
[00:55] <almoxarife> Soshi: I have been using wubi for long time, few issues
[00:56] <Mathuin> Okay, I'll blow away my Vista32 install and put Ubuntu on, then try to install some games.
[00:56] <pabelanger> howdy!  I'm looking for any tutorials on having a custom kernel within Launchpad PPA?  More of the actually packaging, I was hoping to maintain my own version for some embedded hardware
[00:56] <Mathuin> (I dual boot Vista 64 and 32)
[00:56] <dante123> My kids like tremulous Mathuin
[00:56] <c4pt> any grand canyon theme fans that used to use 2.15.1 gnome
[00:56] <c4pt> i have a question
[00:57] <dante123> Warsow is another fps
[00:57] <c4pt> i can dpkg -i --force-all gnome-themes-2.15.1.deb
[00:57] <MrPiracy> VCoolio: it shut down correctly after reboot, must be a problem with the app ... as i said, it's buggy
[00:57] <c4pt> but it kind of breaks apt-get install with other packages and i have to revert back to using gnome-themes-2.28.1
[00:57] <almoxarife> Soshi: there is/was a crippling error associated wiht grub2 and wubi, this link will show you what to do when it happens, and the fix is 100% simple and fool proof, http://sourceforge.net/apps/mediawiki/bootinfoscript/index.php?title=Boot_Problems:Wubi_9.10
[00:57] <dante123> hi all, I have automatically login enabled and everytime I boot computer I have to enter keyring password, anyway to avoid this (always allow or something)??
[00:58] <Appetite> if im trying to do a "sudo" command from a .sh file, how can i auto-supply the password?
[00:58] <jrib> Appetite: sounds like a terrible idea.  What are you trying to accomplish?
[00:59] <ukebane> Appetite, I don't think you should save your password in a file
[00:59] <Appetite> jrib: a script which does my iwconfig wlan0 essid bla, iwconfig wlan0 key bla, etc
[00:59] <VCoolio> MrPiracy: so it's working now?
[00:59]  * Typos_King dashes
[00:59] <jrib> Appetite: why don't you just use network-manager?
[00:59] <joesin> would somebody be willing to help me with a screen vid cap audio question...
[01:00] <Appetite> jrib: 9.10 minimal, no window manager
[01:00] <joesin> that was convoluted wasnt it...
[01:00] <xp> hi
[01:00] <arand> Appetite: One way is to have the keyring empty, insecure, of course.
[01:01] <Appetite> arand: how do i add a script that needs root access to run on startup?
[01:01] <joesin> I am trying to make some video tutorials about setting up windows domain using virtualbox in ubuntu 9.10
[01:01] <joesin> only been in linux about 3 weeks...
[01:01] <joesin> can someone please assist if they have the time?
[01:01] <MrPiracy> VCoolio: yes ;)
[01:01] <almoxarife> joesin: explain the prob
[01:01] <joesin> almoxarife: thank you...
[01:01] <joesin> want to make some video tutorials...
[01:02] <joesin> purchased a bluetooth adapter today...
[01:02] <jrib> Appetite: I don't know the right way to do that on a server, but I know the way you suggested isn't it
[01:02] <shane_> hello, printer help please
[01:02] <joesin> it works fine and can capture audio...
[01:02] <shane_> !printer
[01:02] <joesin> but i cannot get the vid screen cap software to pick the audio correctly...
[01:02] <joesin> it clips...
[01:02] <jrib> Appetite: one way, that I've seen in the past, is to use /etc/rc.local but I'm pretty sure there is still a better way
[01:02] <joesin> thought it was a memory problem... so killed everything I could and still had the same issue..
[01:03] <Mathuin> If you want to sudo from a script, you should stick the command you're running from sudo in the sudoers file.
[01:03] <joesin> am I using the wrong app? is there a better one? I am using xvidcap
[01:03] <Appetite> thanks jrib
[01:03] <joesin> tried istanbul but was a bit above my head...
[01:04] <joesin> still there?
[01:04] <holmser> how do I change another users password as root?
[01:04] <Mathuin> holmser: 'passwd username'
[01:04] <xp> guys
[01:05] <holmser> nice
[01:05] <xp> my network is too bad i dont know why
[01:05] <holmser> thanks
[01:05] <joesin> should I try another room?... new to irc aswell...
[01:05] <almoxarife> joesin: I have had clipping issues with virtualbox, it was defaulting to alsa. once I changed to pulse my issues were solved, can you change that sort of thing with your apps?
[01:05] <histo> joesin: clicking the record button was above your head?
[01:05] <joesin> histo: no... thank you for your valid input...
[01:06] <histo> joesin: try gtk-recordmydesktop?
[01:06] <joesin> almoxarife...
[01:06] <joesin> the vdis themselves do not have sound clipping issues...
[01:06] <histo> joesin: very easy one
[01:06] <joesin> the audio input from my head piece clips wheli screencapping
[01:06] <xp> its 1024 miga  and cant open sites
[01:06] <joesin> I am wondering if it is the app itself...
[01:07] <joesin> and if there is a better option to try...
[01:07] <histo> joesin: could be thats the beaty of free software you can try another one
[01:07] <histo> joesin: gtk-recordmydesktop is a nice one
[01:07] <PaperBoy> hi
[01:07] <almoxarife> joesin: does it clip with installed mic?
[01:07] <joesin> histo: thank you... i will try that...
[01:07] <PaperBoy> Does anyone know if Netflix instant watch works on linux?
[01:07] <histo> PaperBoy: no it doesn't
[01:07] <histo> PaperBoy: due to drm issues
[01:08] <papalaye> salut tout le monde
[01:08] <joesin> almoxarife: have not tried with a wired mic as I do not own one... I opted for complexity in the name of coolness...
[01:08] <Mandella> bonsoir
[01:08] <almoxarife> PaperBoy: no, unless you can get it to work in wine,
[01:08] <joesin> almoxarife: and look where that got me
[01:09] <straterra> Is there a way to get a newer version of wine? 1.0.1 is pretty old
[01:09] <papalaye> je suis un nouveau
[01:09] <joesin> almoxarife: this is not a work or school project... I wanted to learn linux, so I have been finding ways of making things very difficult in order to better solve them
[01:09] <Mandella> quelle est la méthode pour synchroniser mon ipod dans Rhythmbox
[01:09] <PaperBoy> just so we are clear, i am talking about waching it with in firefox as i do in windows
[01:09] <joesin> I thank all of you for your help...
[01:09] <joesin> I will try a borrow mic...
[01:09] <joesin> and the software you recommended histo...
[01:09] <almoxarife> joesin: good luck
[01:10] <epaphus> Losha, right.. its there.. but how do I install it?  sysstat - system performance tools for Linux  .. apt-get install sysstat doesnt find it
[01:10] <almoxarife> PaperBoy: no, won't work in ubuntu/linux out of the box
[01:10] <PaperBoy> crap
[01:10] <joesin> xvidcap is pretty easy out of the box, so I recommend it for sure, and I imagine that my headset is the problem
[01:10] <PaperBoy> so i need to virtual box in to windows?
[01:10] <xp> is there any one can help me
[01:10] <joesin> whats up xp...
[01:10] <dante123> xp with what
[01:10] <xp> about my network
[01:10] <epaphus> hey guys... i have sound from my integrated sound card.. but when doing voip.. the sound is very low, and people also hear me VERY low... i went into the preferences and put the sound to the maximum but no luck. Is there anything else i can do?
[01:10] <dante123> what about it
[01:10] <xp> its too slow
[01:10] <Losha> epaphus: what os version are you running?
[01:10] <almoxarife> PaperBoy: so I run winxp in virtualbox and watch it that way? :)
[01:10] <joesin> I dont know much about much, but maybe I can help...
[01:10] <joesin> what is slow
[01:11] <histo> PaperBoy: yes but I doubt you will get high enough frame rates for it to even be watchable
[01:11] <xp> the network is slow and cant open web
[01:11] <epaphus> Losha, nevermind.. sorry... solved
[01:11] <histo> PaperBoy: That's why i'm waiting for the netflix on demand for the wii thats coming.
[01:11] <xp> is that from company
[01:11] <PaperBoy> almoxarife: ? its watchable in virutal box?
[01:11] <Losha> epaphus: good
[01:11] <joesin> I think xp is playing jokes on people...
[01:11] <histo> PaperBoy: sux that there is no linux solution there is some information availible on forums all over the net. I think netflix even has forums
[01:11] <xp> its about all my pc
[01:12] <xp> in net cafe
[01:12] <xp> its too slow
[01:12] <almoxarife> PaperBoy: mine is, insure the virtualbox is set to use the oss sound, clips in alsa
[01:12] <Mathuin> Wow!  Ubuntu's install asked me if I wanted to migrate documents and users from Vista.  Most impressive.
[01:12] <xp> i have 1024 miga speed
[01:12] <steven_> hello
[01:12] <KikkyMonk> So I installed Ubuntu Karmic 64-bit with the live CD and when I restart it doesn't show GRUB (I also have windows 7 installed)
[01:12] <xp> and i do everythink
[01:12] <histo> KikkyMonk: does it boot?
[01:12] <KikkyMonk> Just windows 7
[01:12] <histo> !who | xp
[01:13] <almoxarife> KikkyMonk: a wubi install?
[01:13] <KikkyMonk> What's wubi?
[01:13] <histo> KikkyMonk: aparently grub didn't get installed to mbr then.
[01:13] <leftist> can you teather your cell phone with ubuntu?
[01:13] <histo> !grub > KikkyMonk
[01:13] <almoxarife> its not wubi
[01:13] <histo> leftist: yes
[01:13] <leftist> histo is there a guide i can follow?
[01:14] <histo> leftist: what kind of phone?
[01:14] <leftist> HTC Tilt
[01:14] <histo> leftist: let me search hold up
[01:14] <xp> sorry
[01:15] <StrangeCharm> what's a good / the standard application for stitching together multiple PDF files, and possibly doing OCR?
[01:16] <xp> w
[01:16] <joesin> hahahaha
[01:16] <genii> xp: No, "w" is more like standard app for whos on
[01:16] <histo> leftist: what do you mean by tethering as well?
[01:16] <PaperBoy> im considering making dual boot but im a little hesitant.. since  if i will want to get rid of linux i wont be able to unpartition the drive back to nurmal with out risking windows damange
[01:16] <joesin> do not know how to stop the recording now that I started it!
[01:16] <leftist> histo to use the phone as a modem.
[01:16] <joesin> @histo
[01:16] <PaperBoy> or file damange altogether
[01:17] <leftist> having problems with the internal wifi card. mini pci card is on the fritz
[01:17] <histo> leftist: ahh hold up
[01:18] <Roasted> Is there any way I can set up my laptop so it records in a text editor whenever it loses wireless connection?
[01:19] <Fopp|Newbie> H guys, back again, I followed these instruction http://www.iamatechie.com/set-up-bluetooth-in-ubuntu/ but no dice on the bluetooth issue. =(
[01:19] <almoxarife> Roasted: syslog records it, and its txt ?
[01:20] <histo> leftist: http://snowulf.com/archives/586-Tethering-my-ATT-Tilt-to-the-Eee-PC.html
[01:20] <thinkactlove> #ubuntu-chicago
[01:20] <Roasted> where is syslog located almoxarife
[01:20] <histo> leftist: there is some info i'm sure there is more on the forums
[01:20] <leftist> ok histo let me look brb
[01:20] <thinkactlove> oops
[01:20] <caffeinated> firefox does not start on gnome, any fix for this?
[01:20] <thinkactlove> what command do i use to join #ubuntu-chicago
[01:21] <histo> thinkactlove: /join #ubuntu-chicago
[01:21] <thinkactlove> thankyou
[01:21] <almoxarife> Roasted: system>admin>log file viewer>syslog
[01:21] <caffeinated> firefox does not start on gnome, any fix for this?
[01:21] <Roasted> almoxarife, oh gosh there's a lot here...
[01:22] <KikkyMonk> I installed Karmic from a live CD to mount point "/" and GRUB won't load when I reboot (I also have windows 7) I did the dual booting fix here https://wiki.ubuntu.com/Grub2 and it says error: cannot find a device for /.
[01:22] <Roasted> almoxarife, is there any way I can filter this so I JUST see the dropped connections?
[01:22] <Zenker> how do i make the fusion icon show up when i start ubuntu?
[01:22] <shane_> ok, so please...ubuntu 9.10 has broken CUPS sharing
[01:22] <shane_> 3 machines. please help!
[01:23] <NetScr1be> caffeinated, delete .lock file in ~/.mozilla
[01:23] <nugatman> hi!!
[01:23] <nugatman> kumusta
[01:23] <almoxarife> Roasted: I use 'find' to look for instances of some 'text string', there are more complicated ways but I am not verse on them
[01:24] <Blue1> how do I check the ink levels in an hp printer using hplip?
[01:25] <almoxarife> Blue1: package hplip-gui does it for me
[01:25] <Blue1> almoxarife: i'll give a shot
[01:26] <Blue1> almoxarife: nope
[01:26] <almoxarife> Blue1: nope?
[01:26] <Blue1> almoxarife: no hplip-gui got me a command not found
[01:26] <Zenker> how do i make the compiz fusion icon start up automatically when i start ubuntu?
[01:27] <almoxarife> Blue1: wait one
[01:27] <Blue1> almoxarife: thanks
[01:27] <SuperMiguel> whats easier to manage kvm or xen?
[01:27] <j3rg> hey guys
[01:28] <j3rg> can anyone tell how can i find out if my HD is PAL or NTSC
[01:28] <j3rg> ?
[01:28] <almoxarife> Blue1: hplip-gui is a package, install the package with synaptic
[01:28] <Blue1> almoxarife: it's installed but doesn't come up
[01:28] <xuxin> Hi. Does anyone here know how to get swedish keymap working with irssi?
[01:30] <Appetite> via command line, how can i set it to (by default) show hidden directories when i "ls" ?
[01:30] <NetScr1be> all smartata (palimpsest) seems to do is throw false error messages. what's the best way to de-install or disable?
[01:30] <SuperMiguel> Appetite ls -a
[01:30] <weudes> Hi
[01:31] <Blue1> almoxarife: hplip-gui is installed but hplip-gui doesn't call the task up
[01:31] <almoxarife> blue1: installed and reboot?
[01:31] <weudes> vixi sou br e não compreendo nada
[01:31] <Blue1> almoxarife: why would I need to reboot?  this is linux not windows?
[01:31] <weudes> irc errado haha
[01:31] <Appetite> SuperMiguel: is there a way to set it so that whenever i do "ls" in the future, i dont have to have "-a" ?
[01:31] <NetScr1be> Blue1 the hidden cost of HP
[01:31] <almoxarife> Blue1: as you please
[01:32] <Blue1> NetScr1be: okay I;'ll try but I;kll bet it doesn't change anything
[01:32] <xuxin> I'm trying to enable swedish keymap in irssi, anyone who know how to do this?
[01:32] <SuperMiguel> Appetite you can use alias
[01:32] <Appetite> SuperMiguel: how?
[01:32] <NetScr1be> Blue1 what model printer? they don't all support that
[01:32] <NetScr1be> Blue1, especially in HP open source
[01:33]  * NetScr1be is not an HP fan
[01:33] <SuperMiguel> Appetite man alias
[01:33] <Appetite> k SuperMiguel
[01:33] <Mathuin> installing 241 projects since 9.something was released.  When's the next release?
[01:33] <Mathuin> s/projects/packages/
[01:34] <SuperMiguel> Appetite, alias ls="ls -a"
[01:35] <SuperMiguel> Appetite, or better do alias ls="ls -al"
[01:35] <Blue1> almoxarife: nope reboot as predicted did nothing
[01:36] <Appetite> thanks SuperMiguel
[01:36] <NetScr1be> Appetite, my alias uses single quotes
[01:36] <NetScr1be> Blue1 what printer model?
[01:36] <Blue1> hp-psc 1310
[01:37] <Mathuin> Is there an IRC channel to discuss Google Calendar?
[01:37] <Bonster> where u go to remap IR remote keys?
[01:37] <Zenker> how do i make the fusion-icon start up with ubuntu, i tried start up applications and i added  "fusion-icon --no-start " and i tried the automatically remember option in the options tab as well, neither worked
[01:37] <Blue1> NetScr1be: the name is not hplip-gui to run -- it's prolly called something else.
[01:37] <almoxarife> Blue1:  have a hp officejet j5780 all in one, ubuntu has no issues with it, can't speak for your setup
[01:37] <ringer> have accidentally installed eclipse into /opt/eclipse/eclipse/ folder. How do I move the eclipse folder up the tree so it is in /opt/eclipse/ ?
[01:38] <histo> Mathuin: I doubt on freenode. Google has discussion groups though
[01:38] <Blue1> almoxarife: i'll try to see if I can derive a name - I just know it's not hplip-gui
[01:38] <SuperMiguel> whats easier to manage kvm or xen?
[01:38] <c4pt> hello
[01:38] <Mathuin> histo: the bug that's bugging me is timezone-related, there aren't any fixes on the discussion groups, was wondering if anyone on IRC might have workarounds.
[01:38] <almoxarife> Blue1: the running process is not 'hplip-gui',
[01:39] <histo> SuperMiguel: I think you'll get a thousand different answers on that.
[01:39] <histo> !best | SuperMiguel
[01:39] <c4pt> id really like to be able to use grand-canyon from gnome-themes 2.15.1 but when i force install i have to revert because apt-get detects broken packages
[01:39] <Mathuin> ringer: "mv /opt/eclipse /opt/eclipse-oops && mv /opt/eclipse-oops/eclipse /opt && rmdir /opt/eclipse-oops"
[01:39] <c4pt> even though it seems to work
[01:39] <c4pt> is there a work around for this?
[01:39] <SuperMiguel> histo, just need one :P
[01:40] <almoxarife> Blue1: I see the 'hp toolbox' in sys > pref
[01:40] <ringer> thanks Mathuin - I just about worked that out for myself. Been some time since I last used linux!
[01:40] <PsychoticEGG> okay I'm lost
[01:40] <Mathuin> ringer: no problem, glad I could help.
[01:40] <Zenker> should i try and leave out the -no startup?
[01:40] <c4pt> ??
[01:41] <PsychoticEGG> I downloaded Nvidia driviers from synaptic do they auto install or do I have to build them through the terminal?
[01:41] <NetScr1be> Blue1, no web inter4face onpsc 1310
[01:41] <PsychoticEGG> and if I have to build them how?
[01:41] <MrPiracy> karmic offered a "partial upgrade" when i chose to update my system (which should be up to date) and now it is upgrading ALL my apps. what is really going on? can anyone tell me?
[01:42] <PsychoticEGG> hello?
[01:42] <almoxarife> Blue1: but  had to re-boot to see 'hp tool' in prefs :)
[01:42] <PsychoticEGG> Former windows user till today. Help?
[01:42] <Zenker> yay! that worked, i just had to leave off the --no-start option
[01:43] <rsk> !ask | PsychoticEGG
[01:43] <rsk> PsychoticEGG saw the question now, why don't you go to hardware manager and install it there?
[01:43] <acovrig> is receiving incremental file list
[01:43] <acovrig> sent 12 bytes  received 53 bytes  18.57 bytes/sec
[01:43] <acovrig> total size is 0  speedup is 0.00
[01:43] <acovrig>  normal output from rsync?
[01:43] <FloodBot4> acovrig: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[01:44] <snxs> PsychoticEGG , they should install auto,   did you activate the recommended driver ? on hardware drivers?
[01:44] <PsychoticEGG> Not in the options list. they only have older drivers in the hardware options. which don't have the rescaling tool I need.
[01:45] <acovrig> Losha, u here? I don't think rsync is working anyway
[01:45] <NetScr1be> Blue1, there 148 bugs listed for hplip http://launchpad.net/ubuntu/+source/hplip/+bugs
[01:45] <acovrig> I have rsync  version 3.0.5  protocol version 30
[01:46] <snxs> PsychoticEGG are the newest u got 195 ?
[01:46] <acovrig> can anyone help with rsync version 3.0.5,  protocol version 30
[01:46] <Mathuin> acovrig: rsync is very sensitive with regard to its arguments.  If you don't specify them exactly right (trailing slashes matter on directories, and different stuff happens with them versus without them), you will not get the behavior you need.  I always end up re-reading the manual page when using rsync.
[01:46] <KikkyMonk> Should I have installed Karmic to mount point "/"? Grub probe can't find it now
[01:46] <Zenker> ok one more compiz question, do i need ccsm with the compiz fusion icon or can i uninstall ccsm?
[01:47] <acovrig> Mathuin, do you think http://troy.jdmz.net/rsync/index.html will be what I need?
[01:47] <Cial> So the Ubuntu Installer doesnt pick up my Harddrive, I did fdisk on it and it didnt show any partitions. Any clue whats wrong?
[01:47] <PsychoticEGG> yes. but when I go in the terminal and type "gksu nvidia-settings" it saying I do not appear to be using nvidia x driver.
[01:47] <almoxarife> Blue1: try this on terminal          sh -c 'STARTED_FROM_MENU=yes /usr/bin/hp-toolbox'
[01:48] <acovrig> KikkyMonk, where did u install it?  I always install to /
[01:48] <KikkyMonk> acovrig: I put "/" in the mount point
[01:48] <KikkyMonk> acovrig: I'm dual booting with windows 7 (windows was installed first)
[01:49] <acovrig> Mathuin, do you think http://troy.jdmz.net/rsync/index.html will be what I need?
[01:49] <Maranatha> I am having an issue install apps. Every time I try to download an app with software center it tells me waiting on other update managers running. I have no update managers running besides the one I am trying to use.
[01:49] <Magneto> hi
[01:49] <NetScr1be> Cial, auto-partition in install or manual?
[01:50] <Vok> Hello everyone. I have a little I have a generic MP3 player and it was working fine until I decided to create an empty .is_audio_player to be able to transfer music directly from rhythmbox but now it says it's read-only and I even tried to change the permission with chmod -R 777 /media/MP3 but I didn't have any luck :( Could you help me?
[01:50] <acovrig> KikkyMonk, I use XP&ubuntu, install XP, repartition, shrink XP, make new ext3 for ubuntu&swap, install ubuntu ext3 as / then reboot
[01:50] <almoxarife> KikkyMonk: installed to where? you created a partion?
[01:50] <acovrig> What is people's oppinion on http://troy.jdmz.net/rsync/index.html
[01:51] <Mathuin> acovrig: that will help you with the ssh side of things, but not the rsync side.  It will take tinkering at first.  The rsync tutorial at the foot of that page will be helpful.
[01:51] <KikkyMonk> Yes I created a partition
[01:51] <snxs> Maranatha , does it  keep happening once u reboot ?
[01:51] <Cial> Im not sure it just refuses to show the hard drive
[01:52] <KikkyMonk> acovrig: Yes, I created a partition
[01:54] <akuiraz_> I am building a Ubuntu 9.10 desktop, primarily for acting as a DVR to connect to my tv... problem is I only have an old card (ATI RADEON 9600 PRO w/ S-VIDEO OUT).  Is there an easy method to instruct the KMS kernel to automatically select and activate the TV-out as the display? This way I could tuck the PC away and if it needs to restart it can do so and auto start backup ready for the tv...
[01:54] <molqr> hello all...
[01:54] <molqr> am looking for a short and sweet primer on screen ... any recommendations?
[01:57] <Maranatha> I am needing help. Ubuntu Software Center or Ubuntu Tweak is not letting me download any apps. I keep getting quit other update managers every time I try downloading or updating any packages. I have no other managers running besides the one I am trying to use.
[01:58] <jusama14> Hello, I'm using a ubuntu live cd to back up some files from windows but I don't see the windows partition. Do I have to mount it?
[01:58] <Maranatha> Jusame14: yes
[01:58] <MrPiracy> need help installing my acer aspire 5720 crystal webcam. whenever i try to open it, it only gives me a black image
[01:59] <Cial> NetScr1be i take back my last statement it isnt working on both of them because i cant see the hard drive
[01:59] <almoxarife> MrPiracy: open with ?
[01:59] <Maranatha> Jusama14: yes mount the hard drive and you will be able to get the XP partition
[01:59] <researcher1> I had a 9.10 Desktop installation on which I installed Ubuntu server. The I installed again 9.10 desktop on the same.But now my earlier Downloads folder in which important file were there is inaccessible.What should I do?
[01:59] <Zenker> is anyone in the mood to help me get bryce 5 working, i will share a copy w u if you dont have it, it runs with whine but none of the sliders will work, such as the one on the timeline, you're supposed 2 be able to grab and drag the playhead but it wont budge
[02:00] <letusgothen> GÑARDLINGS
[02:00] <Mathuin> Hmm.  Tremulous gives me 90fps with the latest proprietary drivers.  I'm not sad.
[02:00] <taurinebooster> is anyone familiar with seahorse?
[02:01] <r33d> zenker, food for thought... maya will work under ubuntu just fine
[02:01] <MrPiracy> almoxarife: emesene, skype, sl, ....
[02:01] <Zenker> r33d maya aslo costs like 500$ rofl
[02:01] <almoxarife> MrPiracy: you got vlc installed?
[02:01] <r33d> it costs more than that....
[02:01] <r33d> a lot more
[02:01] <Mathuin> Something horrible happened when I tried to *exit* the game, but hey.
[02:01] <MrPiracy> almoxarife: yes
[02:02] <r33d> blender also runs just fine under ubuntu... and v 2.5 has a UI that won't make your eyes bleed
[02:02] <almoxarife> MrPiracy: tried vlc to open cam?
[02:02] <Zenker> r33d i only use bryce to preview an idea, it saves time for setting up ideas and objects 2 see sorta how they look
[02:02] <Sebboh> researcher1. Can you FIND the files, but not open them?
[02:02] <r33d> you could use blender for that
[02:02] <r33d> it is free
[02:03] <r33d> in fact
[02:03] <MrPiracy> almoxarife: how? i never done it from vlc
[02:03] <r33d> i think you can use synaptic to install it
[02:03] <zroysch> i would like to know why my transmission is still version 1.5 when i just tried updating it using the following site's instructions: https://edge.launchpad.net/~transmissionbt/+archive/ppa?field.series_filter=jaunty  also how I can make it version 1.92
[02:03] <Zenker> r33d, yes but it takes me a lot longer to make all those textures, bumps , backgrounds etc
[02:03] <Sebboh> Yeah Blender is in the repos.
[02:03] <r33d> zenker... why?
[02:03] <jusama14> Maranatha, how do I do that? I don't see it under "places"
[02:03] <Zenker> i have blender 2.49b, and it runs like a dream, unfortunatly im very much a noob
[02:03] <r33d> is bryce real good at that or something?
[02:04] <r33d> ahh
[02:04] <r33d> eah
[02:04] <r33d> new UI's suck :\
[02:04] <Mathuin> Speaking of noobs and graphical stuff, my next challenge is getting my inexpensive tablet workign with Gimp.
[02:04] <almoxarife> MrPiracy: media>open capture device>play
[02:04] <beauford> hello
[02:04] <r33d> btw the bryce problem might be a graphics driver thing
[02:05] <MrPiracy> almoxarife: VLC is unable to open the MRL 'v4l2://'. Check the log for details.
[02:05] <r33d> i know the nividia drivers gave me hell for a while
[02:05] <Maranatha> Jusama14: go to places and you should a hard drive. right click and you should have a mount option
[02:05] <Zenker> r33d bryce is sorta a crutch for me to make the transition to a real 3d prog from a outdated one
[02:05] <r33d> well go with blender
[02:05] <r33d> its free
[02:05] <r33d> and its powerful
[02:05] <Zenker> for sure ! i just have lots 2 learn still :)
[02:05] <r33d> and the UI is more akin to the other big packages now (maya max, softimage, etc)
[02:06] <jusama14> Maranatha the only hard drive I see under places is "file system"
[02:06] <r33d> i wanted the blender UI devs to go die in a fire for a long time
[02:06] <Roasted> Does anybody know why network manager holds wireless networks it finds listed in the available SSID list until you disable and then re-enable your wireless interface to "clear" them and re-scan for new networks in the area?
[02:06] <Maranatha> Jusama14: that should be it
[02:06] <r33d> ok
[02:06] <r33d> going to reboot into win and play counterstrike lol
[02:06] <r33d> later
[02:06] <Zenker> r33d would you like 2 see bryce so u can see how easy it is compared 2 setting up textures n such, its like using a sticker vs an oil painting rofl, i cant wait to be able to "oil paint" with blender
[02:07] <researcher1> Sebboh: I cant find those file
[02:07] <r33d> zenker
[02:07] <r33d> i'm a maya addict
[02:07] <needhelp1> i have an issue i need help with. i have a few folders that i have copied over from an external hdd, and now "on ubuntu" they all have the lock icon and i dont have read or write access and im not owner for some reason. I have tried in terminal to cd to the files and chown *  but its not working.. any ideas?
[02:07] <r33d> i've used it everyday for 3 years
[02:07] <jusama14> Maranatha, right clicking on that doesn't give me a mount option
[02:07] <r33d> also
[02:07] <Sebboh> researcher1, look for extra directory under /home
[02:07] <NinoScript> How do I add another's language dictionary? So that it checks both languages syntax?
[02:07] <Vok> ﻿Hello everyone. I have a little probIem, have a generic MP3 player and it was working fine until I decided to create an empty .is_audio_player to be able to transfer music directly from rhythmbox but now it says it's read-only and I even tried to change the permission with chmod -R 777 /media/MP3 but I didn't have any luck :( Could you help me?
[02:07] <r33d> the only reason i'm looking into blender is as a catalyst to SL
[02:07] <Sebboh> *directories. :P
[02:07] <zroysch> how do i update transmission
[02:07] <researcher1> ok. I will
[02:07] <r33d> coz i can't get the stupid ass open collada plugins to compile
[02:08] <researcher1> presently im not in office but will act n report to Sebboh
[02:08] <Maranatha> Jusama14: did it pop up asking for  authentication?
[02:08] <MrPiracy> almoxarife: no good?
[02:08] <Zenker> ahh, sculpties, i remember tryin to fig those stupid things out
[02:08] <r33d> eh
[02:08] <jusama14> no
[02:08] <r33d> more than that now
[02:08] <r33d> or they're working on it
[02:08] <jusama14> Maranatha, no when I right click it all I see is "open and open terminal here"
[02:08] <r33d> i can't say more or they'll send people to my house to kill me
[02:09] <Maranatha> Jusama14: did you try open?
[02:09] <Zenker> haahaaaa!
[02:09] <r33d> but think about why i would need a collada plugin
[02:09] <r33d> anyway
[02:09] <almoxarife> MrPiracy: system>pref>multimedia system selector> vid out test
[02:09] <nunya> please say more!
[02:09] <ricerocket> hey guys, when i try to burn an iso image to a CD, i always get the same error at the very end of the burn
[02:09] <r33d> later on
[02:09] <jusama14> Maranatha, yeah when I open that I see linux folders like "bin boot, cdrom, dev, etc, home, lib, media, mnt, opt" all that and more
[02:09] <ricerocket> how do i fix it?
[02:09] <Sebboh> researcher1, I won't be here, but here's some advice: if you DO find extra user directories in /home, your files might be in there..  Like /home/user2/Downloads..  But, you might need to be root to open the files or change the permissions. Cheers!
[02:10] <shazbotmcnasty> ricerocket, well, you're going to have to give us there error.
[02:10] <MrPiracy> almoxarife: i dont have multimedia system selector in sys/pref
[02:10] <shazbotmcnasty> ricerocket, I don't really suggest pasting an error in here though
[02:10] <ricerocket> shazbotmcnasty, do you want the pastebin log file or the error #?
[02:10] <CrustyBarnacle> !pastebin
[02:10] <needhelp1> i have an issue i need help with. i have a few folders that i have copied over from an external hdd, and now "on ubuntu" they all have the lock icon and i dont have read or write access and im not owner for some reason. I have tried in terminal to cd to the files and chown *  but its not working.. any ideas?
[02:10] <Maranatha> Jusama: go to the partition program and see if the partition shows up there
[02:10] <Zenker> r33d is there any tut's that u suggest to help me with the textures/painting learning curve?
[02:11] <ricerocket> thanks.... i know how to use pastebin
[02:11] <shazbotmcnasty> lol
[02:11] <shazbotmcnasty> either, I don't know if I can help you, but I'll try
[02:11] <Zenker> !oh he left rofl
[02:12] <jusama14> Maranatha, gigolo?
[02:12] <ricerocket> shazbotmcnasty (could you pick a longer name?) http://paste.ubuntu.com/399637/
[02:12] <Appetite> how do i install openssl from command line?
[02:12] <jusama14> yeah I see it in there
[02:12] <shazbotmcnasty> ricerocket, shaz + tab
[02:12] <ricerocket> o thnx
[02:12] <shazbotmcnasty> :)
[02:12] <jusama14> Maranatha, thanks :D
[02:13] <Roasted> Does anybody know why network manager holds wireless networks it finds listed in the available SSID list until you disable and then re-enable your wireless interface to "clear" them and re-scan for new networks in the area?
[02:13] <Maranatha> Jusama14: ok then it is picking up the partition. you should see a mount either on your desktop or in places
[02:13] <jusama14> Maranatha, I can view it just by double clicking
[02:14] <jusama14> But for some reason it won't show any files in documents and settings or users where all the documents are
[02:14] <ricerocket> shazbotmcnasty, line 2123 gives the first error 'Cannot fixate disk' do you know what that means?
[02:14] <shazbotmcnasty> no idea
[02:14] <Maranatha> Jusama14: ok glad I can help :)
[02:14] <shazbotmcnasty> searching though
[02:14] <shazbotmcnasty> ricerocket, have you tried any other programs?
[02:15] <shazbotmcnasty> I've heard that brasero is really really buggy
[02:15] <shazbotmcnasty> you might want to try like, k3b...
[02:15] <ricerocket> yeah k3B, same deal, although it gave me its own version of it
[02:15] <shazbotmcnasty> oh
[02:15] <shazbotmcnasty> :?
[02:15] <wzl> hello
[02:15] <greezmunkey> ricerocket: what burner software?
[02:15] <nunya> bad drive maybe?
[02:15] <ricerocket> greezmunkey, BRASERO
[02:16] <greezmunkey> ah, ok...
[02:16] <bobstro> Roasted:  just so you can find them again easily
[02:16] <ricerocket> no its worked before
[02:16] <nunya> hhmm
[02:16] <nunya> driver?
[02:16] <ricerocket> maybe the system tries to mount the disk before its finished burning?
[02:16] <bobstro> Roasted:  it makes sense if you're in spotty coverage (like parts of my house)
[02:16] <wzl> hi nunya
[02:16] <^paradox^> im having some problems with rar files. i recently downloaded a few audiobooks in mp3 format and some of the rars are giving me trouble. with archive manager it keeps asking for the password over and over again
[02:17] <nunya> hi wzl
[02:17] <ricerocket> nunya, where would i find that out?
[02:17] <wzl> hehe where are u from ?
[02:17] <nunya> ricerocket, is it the program that gives you that error?
[02:17] <nunya> wzl, boston
[02:17] <^paradox^> with peazip it always gives me a crc failed error on the last file and a hint that maybe i used the wrong password even though i typed the password correctly
[02:17] <ricerocket> yeah, brasero did that is
[02:18] <wzl> o i c . :)
[02:18] <Roasted> bobstro, I understand... however it doesnt add new networks... like I had the Ritas free wifi network and I drove 3 miles away... where I ended up I KNEW there were 5 networks, and yet none showed up EXCEPT Ritas. I had to disable (then reneable) the wireless connection to pick up the new networks.
[02:18] <^paradox^> can someone help me with this?
[02:18] <nunya> ricerocket, did you look in your logs at all?
[02:18] <bobstro> Roasted:  ah... ok that's a bit more specific, sorry.
[02:18] <Vok> ﻿Hello everyone. I have a little probIem, I have a generic MP3 player and it was working fine until I decided to create an empty .is_audio_player to be able to transfer music directly from rhythmbox but now it says it's read-only and I even tried to change the permission with chmod -R 777 /media/MP3 but I didn't have any luck :( Could you help me?
[02:18] <greezmunkey> ricerocket: what spped were you burning at?
[02:18] <bobstro> Roasted:  it does seem slow to pick up new ones/give up on old ones
[02:18] <greezmunkey> speed
[02:19] <ricerocket> yeah, the pastebin i posted a bit ago (find it above) is the log nunya
[02:19] <xisor> does anyone here have an atom 330 + ion system? was wanting info on how well kubuntu or ubuntu would run on one
[02:19] <bobstro> ricerocket:  have you tried burning at a lower speed?
[02:19] <ricerocket> greezmunkey, max speed (avg about 16-20)
[02:19] <ricerocket> i was thinking that might work bobstro and greezmunkey
[02:19] <nunya> good idea greezmunkey
[02:19] <^paradox^> by the way its not all rar files. the only ones that have done this are the ones that have passwords listed with the links. rars requiring no passwords work fine
[02:19] <greezmunkey> ricerocket: set it to the slowest, and try again.
[02:19] <bobstro> ricerocket:  try it low (est) speed to test
[02:20] <bobstro> ricerocket:  as often as not, it's the media (disc) i find.
[02:20] <ricerocket> bobstro, ive gone thru 4 discs
[02:20] <bobstro> ricerocket:  well, 1 more at slowest won't hurt then. :)
[02:20] <ricerocket> as much as i dont like burning at low speeds ill try it
[02:20] <nunya> ricerocket, always the same image?
[02:20] <ricerocket> lol
[02:20] <ricerocket> yeah
[02:20] <ricerocket> and i checked, the image is fine
[02:20] <bobstro> ricerocket:  just to test. you might try different media. i have little luck with those pretty DVDs in colors and such.
[02:20] <xisor> ricerocket are you trying to burn a cd? i had a problem burning earlier today too lol
[02:20] <nunya> maybe try another one
[02:21] <ricerocket> xisor yeah
[02:21] <^paradox^> so can someone help me with this?
[02:21] <xisor> turns out my 56x CDR discs wouldnt burn at speeds higher than 12x, go figure!
[02:21] <nunya> just to test
[02:21] <xisor> made 5 coasters before i figured it out lo
[02:21] <xisor> lol*
[02:21] <ricerocket> nunya im gonna test low speeds first, then if that doesnt work, ill try something else
[02:21] <ricerocket> that sux
[02:21] <puff> I used to use kdiff3 for comparing file hierarchies.  However, that's not available in the repositories anymore.  Anybody recommend an alternative?
[02:21] <bobstro> Roasted:  i think by resetting interface, you're just speeding it up. i've noticed by the time i manually enter a new one, it shows up.
[02:21] <puff> Also, ideally something I could run remotely...
[02:22] <bobstro> ricerocket:  if you find a brand of disc that works well, STICK WITH IT. the cheap stuff can be a pain sometimes.
[02:22] <nunya> goodluck ricerocket
[02:22] <Roasted> bobstro, yeah. I guess it makes sense. I was just kind of surprised to be miles away and... oh... ritas...????
[02:22] <indigo1> Hi, I am a newbie to this forum and I am not sure how this works and this is the right platform for my question. I am need some troubleshooting help with the boot up of my Ubuntu Remix on my Acer Aspire One netbook. It was working fine until yesterday, now it does not boot properly and is all distorted. I am able to get to the command line when using ESC at Grub logo. Any ideas? Many thanks
[02:22] <bobstro> Roasted:  yeah, but it's nice when it re-finds your house when you get back home! (my situation.)
[02:22] <CrustyBarnacle> puff: kdiff3 is in repos for Karmic
[02:23] <ricerocket> thanks guys. bobstro, just out of curiosity, which brand do you 'stick with'?
[02:23] <^paradox^> anyone?
[02:23] <Roasted> bobstro, when I pulled in my driveway, I still had ritas. I had to disable/renable to pick up my home network. Makes me wonder if I should stick with WICD....
[02:23] <puff> CrustyBarnacle: that's great to hear, now I just need to upgrade to karmic...
[02:23] <bobstro> Roasted:  only thing that made a difference for me was to be a bit more patient. it is slow.
[02:24] <Roasted> bobstro, so you've experienced the EXACT same thing as me, but you just give it time?
[02:24] <bobstro> Roasted:  it does seem faster with WPA link. but open wifi yeah, it can be slow.
[02:24] <bobstro> Roasted:  not sure it's the SAME thing but i've seen old names, yeah.
[02:24] <Maletor> I want to switch from Ubuntu 9.10 to Gentoo 2010.1. How easy is this switch going to be?
[02:25] <Roasted> bobstro, have you used WICD?
[02:25] <needhelp1> can anyone help me with chmod issues
[02:25] <ProjectxSorrow> Maletor:if i may ask why gentoo
[02:25] <bobstro> Roasted:  no, just default stuff in ubuntu. i don't have patience for experimentation anymore.
[02:25] <snxs> ^paradox^ normally you get the password of the file from the place you dload it, u maybe downloaded from another site, and the password isn't workiing. you can try with another zip program to see if its not the program ur using.
[02:25] <needhelp1> bobstro, use wcid ... it works so much better
[02:25] <nunya> needhelp1, did you copy the files as root?
[02:25] <needhelp1> no
[02:25] <Maletor> ProjectxSorrow: more up to date packages for nginx and ruby / rails
[02:25] <needhelp1> i wish
[02:26] <bobstro> needhelp1:  i'll make a note. mine's pretty happy these days, but it sounds promising.
[02:26] <ricerocket> Maletor, just as a general answer to your q, if you know which programs/settings/things you want, then you'll be fine. Maybe a day of tinkering will be good to get everything situtated.
[02:26] <needhelp1> nunya, and im trying to chmod entire directorys but it wont let me
[02:26] <^paradox^> snxs: tried archive manager and peazip and no luck with either
[02:26] <needhelp1> operation not allowed
[02:26] <ricerocket> needhelp1, did you try using nautilus as root?
[02:26] <bobstro> needhelp1:  network manager has annoyed me with other things, so it has it coming.
[02:27] <snxs> ^paradox^ then its most likely to be the file.. to bad :(.. maybe try a password recovery tool
[02:27] <^paradox^> snxs: in peazip and archive manager its always the last file in the archive thats bad
[02:27] <ProjectxSorrow> Maletor:really? ill have to check that out im reinstalling Ubuntu 9.10 because i messed up a scrpit when i was changing the os around to my benefit dont feel like fixing all that so im reinstalling but ill have to check that out
[02:27] <CrustyBarnacle> needhelp1: chmod -R ?
[02:27] <needhelp1> r and rw
[02:28] <needhelp1> ricerocket, not yet
[02:28] <ricerocket> needhelp1, did you try also setting it from nautilus normally?
[02:28] <bobstro> Maletor:  you can compile from source on ubuntu if you want. nothing wrong with gentoo if you want that approach.
[02:28] <^paradox^> snxs: example if there are 4 mp3s the fourth one is always bad. thats with peazip
[02:28] <upgrdman> i want to monitor USB traffic for a device (vinyl cutter) that will be used in VMware. are there any tools for linux or VMware that will let me monitor USB traffic?
[02:28] <ricerocket> in the properties section of a folder there's a permissions tab
[02:29] <needhelp1> ricerocket, trying naut now
[02:29] <ricerocket> that normally works for me, cuz im no good with chmod stuff
[02:29] <^paradox^> snxs: with archive manager it just keeps asking for the password over and over. it does extract the other files, but the last file it doesnt
[02:29] <ricerocket> ^paradox^, can you add files to the archive?
[02:30] <sstefaniperuana> buenas noches un caballero mayor de 40 que hable español
[02:30] <^paradox^> ricerocket: dont know. i havent tried
[02:30] <Mathuin> Bah.  I thought I'd go through the packages to see which ones to install.  I'm up to "d" now.  It's taking forever. :-P
[02:30] <sstefaniperuana> buenas noches un caballero mayor de 40 que hable español
[02:31] <ricerocket> ^paradox^,  cuz what i was thinking was that you could add a dummy file with name 'zzzz' or whatever so it sees that as the last file
[02:31] <sstefaniperuana> buenas noches un caballero mayor de 40 que hable español
[02:31] <ricerocket> and makes everything else good
[02:31] <ricerocket> !es
[02:31] <sstefaniperuana> buenas noches un caballero mayor de 40 que hable español
[02:31] <sstefaniperuana> buenas noches un caballero mayor de 40 que hable español
[02:31] <needhelp1> ricerocket, thats working.. should i change the owner to my local user
[02:31] <^paradox^> ricerocket: well its worth a try. ill brb
[02:31] <bobstro> Mathuin:  your menus are going to be a mess. i've done that. :)
[02:32] <needhelp1> or just change the other settings for everyone to have read write access ?
[02:32] <ricerocket> needhelp1, i wanna say yes, but unless the files are being accessed by other users/computers/a network i dont think it matters. But change the setting to have rw access, yes
[02:33] <needhelp1> ricerocket, thanks so much
[02:33] <ricerocket> yep :)
[02:35] <ProjectxSorrow> do you guys think ubuntu is the easiest to use distro(not asking for me) for newcomers
[02:35] <Zenker> is there a streaming video player that will allow me to buffer a whole movie b4 i play it, the movie player dosent seem to allow any buffer size adjustments
[02:35] <arctanx> ~[6~[6~[6~/part
[02:36] <^paradox^> ricerocket: peazip wont let me
[02:36] <snxs> i do think its the most user friendly of all distros
[02:36] <ricerocket> ^paradox^, did you try the default archive mgr?
[02:36] <Endasil> ProjectxSorrow: Some find KDE (Kubuntu) easier if coming from a windows background
[02:36] <ricerocket> ProjectxSorrow, yes and no
[02:36] <MrPiracy> having problems using my crystal eyes webcam on linux. could anyone help?
[02:36] <nunya> it can get you into more trouble
[02:37] <Endasil> ProjectxSorrow, just superficially though
[02:37] <^paradox^> ricerocket: archive managers terminal output said cannot modify the volume
[02:37] <wasutton3_> is there a command to increase the wireless power for intel wireless chips?
[02:37] <snxs> ^paradox^ is it a group of files? some of them need the complete set of rars for it to work.. even with the correct password.
[02:38] <ricerocket> hmmm.... just to clarify ^paradox^, you're trying to unzip a rar file? (i wasnt really following from the start)
[02:38] <vonnick> Is there any way to downgrade firefox 3.6 to 3.5 in the lucid beta?
[02:38] <ricerocket> cuz it seems like it's pw protected, unless you know the password, you're outta luck
[02:38] <etzerd> hello all
[02:38] <etzerd> how can I install ubuntu restricted?
[02:38] <^paradox^> snxs: well there are 5 mp3s inside it and usually four to six in others that did the same thing
[02:39] <ProjectxSorrow> Endasil:see im asking because my friends girlfriend has vista and is having problem now im a high grade tech working for @yourservice in cromwell ct and i took a like and basically its just cuz vista is a terrible os and she had some reg errors i fixed in her userint and windowsnt folder she wants 7 and cant afford it i told her about ubuntu and the work i do with it
[02:39] <ricerocket> etzerd, what version of ubuntu are you using?
[02:39] <Zenker> what media player should i use for streaming video if i have a slow internet connection?
[02:39] <etzerd> version 9.04
[02:39] <^paradox^> ricerocket: yes im trying to unrar it. ive installed unrar, rar and p7zip trying to figure this out
[02:40] <^paradox^> lol at least i have variety
[02:40] <ricerocket> ok, go to system>administrator>synaptic package manager
[02:40] <vonnick> anyone? firefox 3.6 has really bad font issues
[02:40] <ricerocket> ^paradox^, but is it password protected?
[02:40] <ricerocket> cuz that MIGHT be ur problem...
[02:41] <ricerocket> vonnic, uninstall current then install older one?
[02:41] <ProjectxSorrow> so basically i learned linux rather quickly cuz of my backround and she has no backround
[02:41] <^paradox^> ricerocket: both peazip and archive manager ask for passwords when extracting
[02:41] <nunya> bingo
[02:41] <ricerocket> ProjectxSorrow, It'll be easier if you teach her it, but (i know this is ubuntu) Linux mint is also worth checking out
[02:41] <ricerocket> try both
[02:42] <ricerocket> ^paradox^, exactly, therefore it may be password protected
[02:42] <MrPiracy> acer aspire crystal eye webcam not working. need help please
[02:42] <^paradox^> ricerocket: and i dont copy and paste. i type out the password
[02:42] <Endasil> ProjectxSorrow: If she's not a power user in Windows, she won't be in ubuntu.  But the standard stuff is really easy to learn.  You're there for the rest.  So just don't walk out on her.
[02:43] <etzerd> ricerocket: version 9.04
[02:43] <ProjectxSorrow> ricerocket:linux mint you say? im going to go take a look at that
[02:43] <etzerd> how do I check the driver that install for my video card?
[02:44] <^paradox^> i dont understand. why give a password to people that doesnt work?
[02:44] <ricerocket> ezterd: i go to system>administration>synaptic package manger then search for ubuntu restricted extras
[02:44] <ProjectxSorrow> Endasil:yea i know i know i just dont want to always be watching out for her errors lol
[02:44] <StopSign> 0
[02:44] <Joint> hey i got a question i try mount a freebsd partition but i cannot. save nothing i get this message saying Error writing loader.conf: Read-only file system
[02:44] <Joint> can someone help me?
[02:44] <zeeble> hello. what is the meta package name to install Sun Java JRE 1.6.18?
[02:44] <darolu> etzerd: you'll need to enable Multiverse to install restricted-extras
[02:44] <Joint> zeebie apt-cache search jre
[02:44] <zeeble> Joint: yeah, but I am getting openjdk-jre
[02:44] <ricerocket> ^paradox^, (im not judging you), but is the rar by chance a folder of music that you got off of megaupload.com or rapidshare?
[02:44] <zeeble> is that what it is called now?
[02:45] <etzerd> darolu: how to enable Multiverse?
[02:45] <ProjectxSorrow> anybody use 10.04 beta yet?
[02:45] <Joint> zeeble: nope is not
[02:45] <etzerd> yes I did
[02:45] <^paradox^> ricerocket: yes actually rapid.org
[02:45] <darolu> zeeble: sun-java6-jre I think, but do what Joint said, change the search item to sun-java or similar; also you may want to use "apt-cache show"
[02:45] <ProjectxSorrow> etzerd:how is that
[02:45] <etzerd> ProjectxSorrow: the 10.04 beta1 is the best Ubuntu ever
[02:45] <snxs> :O
[02:45] <Endasil> ProjectxSorrow: Biggest thing is to ensure that programs she knows well are available or easily replacable on linux
[02:46] <joreveusa> new to ubuntu
[02:46] <darolu> etzerd: open the software centre (applications - software center) then click Edit - Software Sources; enable four boxes (main, universe, multiverse...)
[02:46] <Endasil> ProjectxSorrow: for instance, iTunes isn't supported on Linux AFAIK
[02:46] <ricerocket> ^paradox^, ok, don't worry i do it too :), anywho... some of those folders are password protected so unless they give it to you/ you know it you won't ever get your music
[02:46] <zeeble> darolu: Umm, I am in Lucid. And have universe and multiverse, but I dont get a sun-java. All i see it the OpenJDK thing with Hotspot
[02:46] <ranjan> etzerd, amazed to see the booting speed too :)
[02:46] <jhuni> * test
[02:46] <Joint> hey i got a question i try mount a freebsd partition but i cannot. save nothing i get this message saying Error writing loader.conf: Read-only file system
[02:46] <zeeble> I dont usually need Java, but want to see some charts via the browser. So looking at installing a JRE
[02:46] <ricerocket> ProjectxSorrow, so for alternates to itunes try banshee,rythmbox,amarok and she can pick which one she likes
[02:46] <etzerd> because I bought a brand new Dell laptop that come with a intel integrated video  card, ubuntu 10.04 is the only distro that works with that laptop. great OS I cannot wait for the release
[02:46] <zeeble> Or i could just download the Sun Java JRE tgz and install it
[02:47] <darolu> zeeble: we don't provide support for Lucid in this channel, I don't know if all packages are ready for Lucid, go to #lucid+l for more info
[02:47] <zeeble> darolu: thanks
[02:47] <darolu> !lucid | zeeble
[02:47] <ricerocket> nunya, if youre still there, the cd workded!
[02:47] <^paradox^> ricerocket: they give out the passwords if there is one in the thread along with the download links although they dont work pfft
[02:47] <ProjectxSorrow> Endasil:well she only web browses and uses music player like itunes and vlc for videos so i got firefox and the standard movie player but what can an ipod use for linux
[02:47] <etzerd> the graphic is unbelievable. great great software. go unbuntu
[02:48] <ricerocket> ^paradox^, then i cant help you.... thats the problem that i think ur having. sorry
[02:48] <nunya> ricerocket, was it the speed?
[02:48] <Endasil> ProjectxSorrow: Rhythmbox I think, though I've never used it
[02:48] <ricerocket> nunya, ya :)
[02:48] <joreveusa> whats the word for gaming on linux
[02:48] <ricerocket> ProjectxSorrow, banshee and rhythmbox work for ipod
[02:48] <nunya> ricerocket, cool, I dont remember who told you that.
[02:48] <ricerocket> joreveusa, good, try open arena, cube 2, and battle of wesnoth
[02:48] <ricerocket> nunya, bobstro i think
[02:49] <nunya> ok
[02:49] <^paradox^> ricerocket: the thing is with one download other people said they downloaded the audiobook, extracted it and were never asked for a password
[02:49] <joreveusa> any of those FPS
[02:49] <ProjectxSorrow> etzerd:i agree i love this linux distro i was a little dissappointed wih 9.10 but hopefully 10.04 is ballin'
[02:49] <Piranah> ok almost ready to cave and re-install..... Overscan issue at 720p and 1080p with ubuntu all updates installed. Nvidia for display running on HDMI.... Max res I can use without overscan seems to be 1024x768 that works but looks like crap on a 52 inch LCD
[02:49] <ricerocket> joreveusa, the first 2 are
[02:50] <Piranah> any ideas ?
[02:50]  * jhuni test
[02:50] <ricerocket> oh and UrbanTerror
[02:50] <ProjectxSorrow> o man i hate wine sometimes
[02:50] <nunya> Piranah, dont use a 52 inch lcd?
[02:50] <nunya> :P
[02:50] <Piranah> ok almost ready to cave and re-install.....I would hate to do that for such a simple issue....
[02:50] <Piranah> nunya, lol
[02:51] <ricerocket> ^paradox^, this is basically as far as my knowledge will go, I'm no linux genius... sorry
[02:51] <ricerocket> ^paradox^, did you google it?
[02:51] <nunya> Piranah, I feel your pain
[02:51] <bobstro> ricerocket:  so it's good now?
[02:51] <ricerocket> YES SIR!
[02:51] <xfact> How to know which kind of video card I have? (what is the terminal command...i forgot)
[02:51] <etzerd> ProjectxSorrow: I'm using it now as we speak. I told you the graphic is unbelievable. I almost return the laptop, because I tried every single distro out there all of them after the instllation reboot the laptop the screen is all dark. Even Ubuntu 9.10 did not work with it. Thanks lord Ubuntu 10.04 is on the way.
[02:51] <bobstro> ricerocket:  excellent. experiment with different media. maybe try max/2 and work up slowly. or just wait an extra minute or two.
[02:52] <nunya> xfact: I always looked in dmesg
[02:52] <Piranah> nunya, lots of docs on playing with mode settings in xorg but i find it realy odd that winblows handles 720 and 1080 with no overscan issues vs kick but ubuntu :(
[02:52] <^paradox^> ricerocket: ok i understand. but let me show you the thread here http://rapid.org/board/showthread.php?t=331486 and tell me what you think. my user name is dark_thoughts
[02:52] <alejandroramirez> xfact: lspci
[02:53] <nunya> Piranah, It's always been one of linux's weaknesses in my opinion.
[02:53] <adalal> hey, anyone here know how to setup a radius server on karmic?
[02:53] <adalal> or know of a wiki on howto?
[02:53] <Piranah> nunya, :( Thats unfortunate. I would nvr consider going back to windows after my exp with Linux
[02:53] <ricerocket> ^paradox^, ill try one of the files, if it works, ill give you my email and ill send you the folders, if thats ok with you
[02:53] <viso> hi anybody have experience with lenovo netbook install with ubuntu? will there be any driver problem or slow in performance?
[02:53] <joreveusa> how do you use the cam on a mac with linux os
[02:54] <mikewatt> Hi, everyone.
[02:54] <upgrdman> i want to monitor USB traffic for a device (vinyl cutter) that will be used in VMware. are there any tools for linux or VMware that will let me monitor USB traffic?
[02:54] <nunya> viso, they use them at my work and I havent heard of any issues
[02:54] <^paradox^> ricerocket: thats ok with me
[02:54] <mikewatt> Anybody knows how to make a brightness script for Ubuntu 9.10?
[02:54] <ricerocket> ok gimme a minute...although for me its late, so I'll send them to you tomorrow sometime
[02:54] <ProjectxSorrow> etzerd:really what laptop do you have?
[02:55] <^paradox^> im just trying to figure out if its the rars or the apps im using thats causing the trouble
[02:55] <nunya> Piranah, the old way to setup xwindows in linux was nasty. A real pain compared to now.
[02:55] <mikewatt> I cannot adjust my brightness using the FN key.
[02:55] <etzerd> Dell Inspiron new 2010 i5 1764 M430
[02:56] <mikewatt> I have a GL960+ICH8 based laptop.
[02:56] <etzerd> I just bought it last month.
[02:56] <ricerocket> yeah i realize that, but this is basically my last resort haha
[02:56] <ProjectxSorrow> etzerd:what ram you got installed
[02:56] <Piranah> nunya, ya i rem installing slakware off a billion flopppies lol
[02:56] <Piranah> :)
[02:56] <ProjectxSorrow> etzerd:well how much
[02:56] <etzerd> 4gb RAM DDR3
[02:56] <xfact> I have this video card and it's not supporting any effects, even no driver in hardware drivers, what to do?
[02:56] <xfact> Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter
[02:56] <xfact> Anyone can help/
[02:56] <nunya> Piranah, yup! My first was slackware with the 2.0 kernel lol
[02:56] <snxs> ^paradox^ make some files.. rar them.. password them.. and extract them if it works its ur file ( im very sure its just a corrupt file)
[02:56] <Piranah> lol
[02:57] <Piranah> :)
[02:57] <ProjectxSorrow> etzerd:and all those distros gave you problem(i know it wasnt the ram i was just wondering)
[02:57] <etzerd> with 500gb HD
[02:57] <^paradox^> snxs: ok brb
[02:58] <Piranah> Wierd thing... X crashed once today and ironicaly came back up in the correct mode without overscan at 720p arg I cant replicate the crash or i would just to have access to that mode lol
[02:58] <Piranah> :P
[02:58] <ProjectxSorrow> etzerd:sounds sick im using a hp pavilion dv9000 love this thing
[02:58] <etzerd> I have problem with all those distro because of the graphic card wich is new Intel Accelerator Integrated HD
[02:58] <nunya> ha!
[02:59] <ProjectxSorrow> etzerd:thst werid you wer having problem
[02:59] <ricerocket> ezterd: intel is...bad, with graphics
[02:59] <mikewatt> Any trick to get my FN F7 F8 keys working?
[02:59] <ProjectxSorrow> etzerd:i agree with ricerocket but still you should not of had a problem
[02:59] <mikewatt> I think Ubuntu has a major bug of ACPI control.
[03:00] <etzerd> the revision with this new graphic is very good. not to play game but browse the net and other  stuff it's pretty good
[03:00] <ssmy> mikewatt: really depends on your hardware. google may be your only option unless someone else has the exact hardware working.
[03:01] <ProjectxSorrow> etzerd:i'm compiling wine with an intel graphics card on my desktop to work with oblivion(best rpg ever!!!!!)but im still having problems
[03:01] <mikewatt> I googled a lot and found a lot of similar suffer like me.
[03:01] <etzerd> ProjectxSorrow: the only time it's work if I bring the resolution down to 1024X768 and use VESA. when I swithched to full glance the screen is all dark no GUI.
[03:01] <mikewatt> And x3100 seems to be the common cause.
[03:01] <ricerocket> ^paradox^, any joy?
[03:02] <ProjectxSorrow> etzerd:its dark without gui extra werid
[03:02] <etzerd> yeap, trust me
[03:02] <mikewatt> Hi ssmy.
[03:02] <ProjectxSorrow> etzerd:im having problems with oblivion in wine apparently the scripts in oblivion dont like it to much
[03:02] <Cyber_Akuma> does ubuntu have anything that is like the equivalent of window's Hardware Manager? Especially something that can tell me if I have any hardware thatis unknown or dosen't have drivers?
[03:03] <TimmyM2203> good evening -- I was trying to get my touch screen to work today and messed up my install but if I go back one build everything is fine -- any ideas?
[03:03] <bobstro> mikewatt:  sorry, what sort of computer?
[03:03] <etzerd> remember those machine are new. the DDR3 1066Mhz FSB with the new Intel card none of the previous distro came with drivers for it
[03:03] <mikewatt> I want to know how can I attribute this bug to Ubuntu offical programmers.
[03:03] <^paradox^> ricerocket: and snxs too i dont know how to make a password protected rar with archive manager. i usually just right click and pick a format which offers no extended options
[03:03] <ricerocket> Cyber_Akuma, system>administration>hardware drivers
[03:03] <tona> i am looking for one application related citrix to log in to my server and to run one apllication outside from my country is there one free vesion at ubuntu
[03:04] <mikewatt> I got the COMPAQ.
[03:04] <ricerocket> ProjectxSorrow, chances are that a lot of games for windows dont work very well in wine
[03:04] <ricerocket> its a WIP imo
[03:04] <^paradox^> ill try with peazip
[03:04] <etzerd> ProjetxSorrow: I'm just a linux lover, but I don't know that much about Linux. I just love it
[03:04] <bobstro> mikewatt:  you've tried different keyboard settings?
[03:05] <mikewatt> Any idea how to fix the ACPI Video?
[03:05] <Ganymede> ricerocket, it'll always be a WIP since it's chasing  a moving target
[03:05] <ricerocket> Ganymede, unfortunately true :(
[03:05] <ProjectxSorrow> etzerd:thers a good book imma recommend to you but hold on im installing a nvida 9500 card ill brb
[03:05] <mikewatt> Yeah, I tried. And other FN keys works out of the box.
[03:06] <^paradox^> snxs: peazip opens rars, but doesnt offer anywhere in menus to create them
[03:06] <ricerocket> ^paradox^, i forget how to create pw rar files, try googling it
[03:06] <mikewatt> I also did cat /proc/acpi/video/GFX0/DD03/Brightness. And got values echo back.
[03:07] <Ashok> hello any one tell me the channel for java plesase
[03:07] <leftist> what can you use to sync up a htc tilt with 9.10 rel?
[03:07] <ricerocket> #java?
[03:07] <serge> ok... anyone able to help me on getting a video capture card working?
[03:07] <mikewatt> Bobstro
[03:07] <serge> and .. hi.
[03:07] <bobstro> mikewatt:  yes?
[03:08] <^paradox^> ricerocket: um lol am i supposed to google archive manager or file roller cause? ill try both i guess :-/
[03:08] <adalal> anyone here that can help me with a radius setup?
[03:08] <mikewatt> any idea how to fix it or any advice?
[03:08] <serge> or is there a video4linux group
[03:08] <ricerocket> ^paradox^, idk, but anyway, the file is broken somehow cuz i get an error when extracting it
[03:08] <bobstro> mikewatt:  i fought with all that a few years back... but can't remember details. you need to run a program (forgotten name) that tells you the keycodes returned when you press those keys.
[03:08] <bobstro> mikewatt:  dammm.... can't remember it all now.
[03:09] <mikewatt> I think it`s not a keyboard  settings issue.
[03:09] <ricerocket> ^paradox^ good luck, im out
[03:09] <bobstro> mikewatt:  do they return scancodes?
[03:09] <snxs> ^paradox^ for rar just right click.. click on compress, choose ur extension.. and click that arrow that says other options and theres a password input.
[03:09] <mikewatt> how to see that?
[03:09] <^paradox^> ricerocket: so then maybe its not just me
[03:09] <mikewatt> scancodes
[03:10] <^paradox^> snxs: ok ill try it
[03:10] <^paradox^> ricerocket: nite thanks
[03:10] <mikewatt> I tries special keys of my laptop and only the US keyboard returns the right key.
[03:10] <bobstro> mikewatt:  what ubuntu version?
[03:11] <Ashok> ricerocket: how to add
[03:11]  * matelot is it true that YouTube's "lights-out" does not work in FF 3.0 ?
[03:11] <mikewatt> Ubuntu 9.10. I also tried 8.xxs not working as well.
[03:12] <bobstro> mikewatt:  looks like google time with the specific model. lots of compaqs with that issue, but different keyboard variants.
[03:13] <mikewatt> I checked my keyboard info with Everest under  Windows and it instruct with a JP Keyboard.
[03:14] <Ashok> hello any one help how to add irc channel
[03:14] <mikewatt> bobstro, but how did they fix that?
[03:14] <steven_> hello all i cant play d&d online why i got wine and d&d download
[03:14] <bobstro> mikewatt:  one guy said settings under keyboard apparently.
[03:15] <mikewatt> Just change to the right keyboard and the problem is gone, would that be so easy?
[03:15] <bobstro> mikewatt:  layout -- did you try the various compaq variants?
[03:15] <bobstro> mikewatt:  well... it would certainly make sense.
[03:15] <^paradox^> snxs: im not seeing compress. i highlight three mp3s, right click, i see create archive, i choose rar and the only things left are location with an arrow button and the create button
[03:16] <bobstro> mikewatt:  you're using a US keyboard?
[03:16]  * matelot is it true that YouTube's "lights-out" does not work in FF 3.0 ?
[03:16] <steven_> tps: can you help me
[03:17] <^paradox^> snxs: if i click the arrow button and choose other next to location that only wants to create a folder
[03:17] <mikewatt> At start-up Ubuntu makes the LCD brightness from the dimmest to the Brightest. How to explain this?
[03:17] <steven_>  TPS: i cant play d&d online why i got wine and d&d download
[03:17] <mikewatt> Yep, I`m using a US keyboard setting right now.
[03:18] <bobstro> mikewatt:  are you using compiz?
[03:18] <mikewatt> how to change the layout?
[03:18] <TPS> Unfortunately I'm not knowledgeable about Wine
[03:18] <TPS> @steven_
[03:18] <mikewatt> Yes
[03:18] <adalal> no help on the radius thing then?
[03:18] <steven_> dose some on here know wine i have a porblems with it
[03:19] <bobstro> mikewatt:  under System->Preferences->Keyboard
[03:19] <bobstro> mikewatt:  on Layouts tab. there are several compaq variants.
[03:19] <mikewatt> http://www.ubuntugeek.com/fix-your-laptops-brightness-function-keys-operating-properly-in-hardy.html I`ve tried this too, not working.
[03:20] <steven_> tps: thank you it ever hurts to ask
[03:20] <TPS> No problem
[03:20] <TPS> Sorry I couldn't help
[03:20] <steven_> that ok you need some help
[03:20] <bobstro> mikewatt:  well, the screen DOES get brighter and dimmer, so that part works, right? so you just need to get those keys recognized. did you try the compaq layouts?
[03:21] <CrashRoX> f I setup a new server (same domain). Can I just copy over my SSL settings from the original server or do I need to redo them all?
[03:21] <mikewatt> yes
[03:21] <steven_> g2g night all
[03:21] <mikewatt> still not working though.
[03:23] <bobstro> mikewatt:  did you try in compizconfig?
[03:23] <Maranatha> I need help. Ubuntu Software Center or Ubuntu Tweak is not downloading apps or updates. In Software Center it shows it is trying to download with no progress saying "Waiting for other Software Managers to close" When there are none open.
[03:23] <mikewatt> what`s that?
[03:24] <bobstro> mikewatt:  you can assign mouse and keystrokes to just about anything in compiz
[03:24] <mikewatt> I got F7 for brighter F8 fot brighter.
[03:24] <bobstro> mikewatt:  it'll do keystroke capture.
[03:24] <stsm> how do i mount my usb stick without noexec or nodev ?
[03:24] <greezmunkey> Question regarding postfix, it runs here, but I don't remember loading anything that needs it. Can I disable it in startup manager safely, or is it needed for something I can't think of?
[03:24] <stsm> i need to use debootstrap on my usb stick thats why
[03:24] <Joint> md
[03:25] <bobstro> mikewatt:  if you install compizconfig-settings-manager, you can tweak all those keystrokes
[03:25] <bobstro> mikewatt:  it's not pretty but it will probably work!
[03:26] <mikewatt> Can we check what kind of keyboard we`re using under Ubuntu?
[03:26] <Maranatha> can someone help me?
[03:26] <maco> mikewatt: like model number, or like layout?
[03:26] <serge__> v4l group ain't a talkative bunch
[03:28] <stsm> how do i mount my usb stick without noexec or nodev ? because i need to use debootstrap for create a bootable system on it
[03:28] <stsm> *to create
[03:28] <maco> mikewatt: oh i see what youre doing. is it possible the kernel is not receiving any info from the keys at all?
[03:28] <mikewatt> like model
[03:28] <Ashok> hello any one help me how to add java channel please
[03:29] <mikewatt> Everest shows I`m using a JP keyboard.
[03:29] <mikewatt> I set US keyboard and works at Windows 7.
[03:30] <aliciapg> does anyone know of a program that helps with putting video back together? (like it was split for smaller file size)
[03:30] <bobstro> Ashok:  you tried ##java?
[03:30] <mikewatt> You really think this is the cause?
[03:30] <ZykoticK9> aliciapg, you could try avidemux
[03:31] <mikewatt> bobstro
[03:31] <bobstro> mikewatt:  yes?
[03:31] <aliciapg> ZykoticK9: oh it does that? i already have that program >-<
[03:31] <reign2002> can someone help me with this question????
[03:31] <mikewatt> You really think keyboard settings is the cause?
[03:31] <foxmulder881> Hey folks. When is the beta due?
[03:31] <reign2002> its a computer security question
[03:32] <maco> mikewatt: it could be a lack of kernel support for your model's hotkey or it could be higher level. lets do some tests
[03:32] <bobstro> mikewatt:  if you try compiz settings manager, it will TELL you if it sees a keystroke when you press those. that i know.
[03:32] <Flannel> foxmulder881: #ubuntu+1 will be able to answer that for you
[03:32] <reign2002> anyone know any good security channels?
[03:32] <stsm> Ashok, if you want to join an IRC channel you just need to type "/join #channelname" in your IRC client
[03:32] <sivel> reign2002: ##security ?
[03:32] <maco> mikewatt: if you type "xev" in a terminal and hit enter, then hit the key, does it do anything?
[03:32] <maco> mikewatt: if not...
[03:32] <reign2002> how do I joint it what is the command
[03:32] <reign2002> sivel
[03:32] <sivel> reign2002: /join ##security
[03:32] <stsm> Ashok, the channelname for java is #java, so you need to do "/join ##java" (## is not a typo)
[03:32] <reign2002> thx
[03:32] <Maranatha> Can anyone help me?
[03:33] <sivel> Maranatha: not unless you ask a real question
[03:33] <kid> does anyone know how to install java vatural machine?
[03:33] <maco> mikewatt: in a tty (ctrl+alt+f1 .. ctrl+alt+f7 to get back to X) type "showkey" (without quotes) and hit the key, then see if it gives any info. wait 10 seconds without pressing anything for it to exit. if it shows info, the kernel sees the event but isnt passing it up the stack. if it shows no info, its a driver bug
[03:33] <stsm> Maranatha, not if you wont explain your problem :p
[03:33] <kid> in linux
[03:33] <Maranatha> I have several times really
[03:33] <stsm> start with the first one :p
[03:33] <maco> kid: install openjdk-6-jre
[03:33] <Maranatha> I have an issue with the app manager
[03:34] <stsm> synaptic ?
[03:34] <maco> Maranatha: ps -ef | grep "apt\|dpk"
[03:34] <Maranatha> Software center
[03:34] <mikewatt> Oh I have a friend and he installs UBuntu  on his LENOVO  laptop has this issue too. Any explain of this?
[03:34] <adalal> anyone have any experience with radius servers?
[03:34] <maco> Maranatha: pastebin the output of that
[03:34] <kid> i will try ,thank you
[03:34] <Maranatha> it shows it is download and doesnt
[03:34] <reign2002> anyone have experience with windows 2003/linux security mechanisms??
[03:34] <bobstro> reign2002:  yes, but that is a bit vague.
[03:34] <mikewatt> maco
[03:34] <snxs> more specific reign2002 ?
[03:35] <maco> mikewatt: what?
[03:35] <mikewatt> i did hit xev and returns a bunch of things
[03:35] <reign2002> The project creates a network where users can log into the system and access services under one network. Also if they want to print they will be able to do so under both Linux and Windows 2003.
[03:35] <reign2002> What are the most important facts that a developer should know about the security of this system?
[03:35] <mikewatt> and a small window
[03:35] <maco> mikewatt: yeah itll do stuff every time you move your mouse. if you hold everything still and hit *just* the key you want to test... does it show the keyboard press and release events?
[03:35] <aliciapg> ZykoticK9: um any other suggestions, it kinda didn't like my file
[03:35] <mikewatt> called event test
[03:36] <Maranatha> 9793  9770  0 22:36 pts/2    00:00:00 grep apk
[03:36] <stsm> Maranatha, any errors?
[03:36] <ZykoticK9> aliciapg, no other suggestions sorry
[03:36] <maco> Maranatha: apk?
[03:36] <aliciapg> ZykoticK9: alright thanks anyway
[03:36] <reign2002> central administration over all the users and a printing service.
[03:36] <maco> Maranatha: that grep was supposed to be for "apt\|dpkg"
[03:36] <mikewatt> yes it returns when I hit keys
[03:36] <Maranatha> ok I will try it again
[03:36] <maco> mikewatt: the specific key youre trying to test?
[03:37] <Maranatha> with the ""?
[03:37] <maco> Maranatha: yes
[03:37] <mikewatt> but don`t return a thing when I hit FN+F7 and FN+F8
[03:37] <reign2002> what security should i have in place for a windows 2003 active directory setup
[03:37] <maco> mikewatt: ok then its at the very least not bubbling up to the graphical layer, X
[03:37] <reign2002> for printing and file sharing
[03:37] <mikewatt> It`s my brightness control function keys.
[03:37] <maco> mikewatt: so now try the "showkey" thing in a tty to see if the kernel is getting an event at all
[03:37] <Maranatha> how do I paste without flooding?
[03:38] <maco> !pastebin | Maranatha
[03:38] <mikewatt> How to maco?
[03:38] <mikewatt> How to do that?
[03:38] <Ashok> what is macho
[03:38] <DasEi> reign2002: ask in #windows ?
[03:38] <mikewatt> Should I close that event tester now?
[03:39] <Maranatha> http://paste.ubuntu.com/399666/plain/
[03:39] <maco> mikewatt: go to a tty (ctrl+altf1 .. hit ctrl+alt+f7 when youre done to return to graphical)  and type "showkey" without quotes. hit enter. press fn+f7 and fn+f8. if they do anything, write down the numbers they give. dont touch anything for 10 seconds and showkey will exit. then you hit ctrl+alt+f7 to get back here
[03:39] <maco> mikewatt: yes you can close xev now
[03:39] <maco> mikewatt: can do that by hitting ctrl+c in the terminal
[03:40] <mikewatt> FocusOut event, serial 36, synthetic NO, window 0x4200001,
[03:40] <mikewatt>     mode NotifyNormal, detail NotifyNonlinear
[03:40] <adalal> hello,  is there anyone who can help me figure out why freeradius would ignore request to authentication?
[03:40] <maco> Maranatha: it says its in the middle of installing java
[03:40] <Maranatha> maco: how do I make it stop?
[03:41] <maco> Maranatha: if you stop it while its doing that, you'll just have to let it resume the installation before you can install anything else anyway
[03:41] <maco> Maranatha: just wait for it to finish. shouldnt take long
[03:41] <Maranatha> maco: oh, it has been doing this for days then
[03:41] <maco> Maranatha: well thats interesting...
[03:42] <Maranatha> maco: well since yesterday anyway
[03:42] <Maranatha> maco: I downloaded java last night. My computer stayed on all night long.
[03:42] <maco> Maranatha: is the window from that still open?
[03:42] <maco> Maranatha: i wonder if its sitting at the "do you accept the license?" page of the installer
[03:43] <Maranatha> maco: to be honest I do not see any window. I rebooted twice today thinking it was a glitch
[03:44] <maco> Maranatha: interesting. ok well "sudo kill -9 3510" will kill it, then "sudo dpkg --configure -a" will try to finish/recover
[03:45] <mikewatt> Ok
[03:45] <Maranatha> dpkg: status database area is locked by another process
[03:45] <Maranatha> maco: dpkg: status database area is locked by another process
[03:46] <maco> Maranatha: try killing 3181 and 3509 too then, the two aptd processes
[03:47] <Maranatha> maco: I get no such process when i try killing those
[03:47] <maco> Maranatha: what's the output of that ps command now?
[03:48] <AgentArmstrong> whats up people
[03:48] <xumuk> hi there
[03:48] <bdheeman> hi, friends
[03:48] <bdheeman> openvpn-config goes public http://sourceforge.net/projects/openvpn-config/
[03:48] <onaogh> !s Flicks.Chicks.2010.DVDRip.XviD-aAF
[03:48] <ProjectxSorrow> im back
[03:49] <AgentArmstrong> wb
[03:49] <Maranatha> maco: here is the result http://paste.ubuntu.com/399668/
[03:49] <maco> Maranatha: ok try 2214
[03:49] <bobstro> onaogh:  ?
[03:50] <onaogh> sorry wrong  channel
[03:51] <onaogh> Bob_Dole,
[03:51] <onaogh> bobstro,
[03:51] <bobstro> onaogh:  :)
[03:51] <SakamotoKazuma> question, if I used synaptic package manager to install eclipse, where do I drop something into the eclipse/dropins/ ?
[03:52] <Maranatha> maco: I did press return after I recieved this http://paste.ubuntu.com/399670/ and it prompted me to press return or type no
[03:53] <Endasil> SakamotoZazuma: /opt/eclipse
[03:53] <SakamotoKazuma> Endasil: directory doesn't exist.. :(
[03:54] <maco> Maranatha: did you do what it said to do? (i havent used sun's java in a long while...dont remember this step)
[03:54] <hub_cap> Does anyone know what "root=UUID" means?
[03:54] <Flannel> !uuid | hub_cap
[03:54] <Maranatha> maco: I don't think so.
[03:55] <itheos> hey :)
[03:55] <caleb_> hey
[03:55] <cur> hola
[03:55] <itheos> is partitioning usb hard disk a good idea?
[03:55] <CAPcap> what is the command for renaming a file?
[03:55] <hub_cap> thanks ubottu
[03:55] <SakamotoKazuma> mv
[03:55] <Maranatha> maco: My downloads are working again. Thanks :)
[03:56] <mortici> shoould i upgrade to 10.04 or should i not.... that is the question....
[03:56] <maco> Maranatha: yay :)
[03:56] <caleb_> do it
[03:56] <itheos> mortici, to upgrade or not to upgrade, is the question my friend :D
[03:57] <caleb_> upgrade
[03:57] <Endasil> SakamotoKazuma: do a "ls -la `which eclipse`"
[03:57] <Endasil> SakamotoKazuma and then cat the result
[03:57] <billy> does anyone know anything about making a texted based mmorpg here?
[03:57] <Random832> billy, the usual term is MUD
[03:57] <SakamotoKazuma> root@sakamoto-laptop:/opt# ls -la 'which eclipse'
[03:58] <SakamotoKazuma> ls: cannot access which eclipse: No such file or directory
[03:58] <Random832> SakamotoKazuma, `` not ''
[03:58] <Random832> SakamotoKazuma, what kind of keyboard do you have?
[03:58] <billy> whats mud stand for?
[03:58] <Random832> it's to the left of 1 on a US keyboard
[03:58] <Endasil> SakamotoKazuma: And you can just do cat `which eclipse`
[03:58] <SakamotoKazuma> umm whatever a Gateway MA7 has on it
[03:58] <mortici> itheos, and it is a tough one at that, i am wanting to do an upgrade to 64 bit as well, since i have been running 32bit for a long time....
[03:58] <Random832> billy, "multi user dungeon", and they've been around for decades before the term MMORPG was even invented
[03:58] <Ashok> what is opensuse
[03:59] <mtx_init> Ashok: another Linux distro
[04:01] <Ashok> mtx_init: what is distro
[04:01] <itheos> mortici, i dont know about other people's experience but, upgrading to karmic was a bad experience for me. i hope lucid isnt like that. i noticed one thing, a fresh install was much better for me than upgrading.
[04:01] <mortici> itheos, same here
[04:01] <mortici> i have the beta iso, ima burn the 64bit, backup, wipe and install :)
[04:01] <itheos> that would be better i think :)
[04:01] <mtx_init> Ashok: A distro is the flavour of the gnu operating system and the linux kernel. Different people have different tastes, so they have multiple options.
[04:02] <itheos> Ashok, distro is distribution afaik :) its another name for version
[04:02] <billy> i hear that the new google os is being made on a linux based system is that true?
[04:03] <SakamotoKazuma> I've heard the same
[04:03] <zhouyu> is it possible to install two different version of php in one box ? let's say php 5.2 and php 5.3
[04:03] <AgentArmstrong> try opengeu ashok
[04:04] <SakamotoKazuma> Wow that worked like a charm! Thanks guys! I now have php eclipse properly working now
[04:04] <AgentArmstrong> i hear google OS is gonna give mac a run for there money
[04:04] <billy> yeah it suppose to be open source aswell
[04:04] <Random832> eh, they're going about it all wrong
[04:04] <Random832> they should make a DroidPad
[04:04] <itheos> is partitioning usb hard disk a good idea?
[04:05] <SakamotoKazuma> zhouyu: I have 5.1 and 5.3.1 installed on two separate lampp installs, I just installed and renamed /opt/lampp to /opt/lampp2 and installed another one
[04:05] <Random832> itheos, how big's the disk?
[04:05] <itheos> Random832, 500GB only :D
[04:05] <SakamotoKazuma> then some minor tweaking .... :)
[04:05] <Random832> itheos, i don't think i've ever owned a hard drive quite that big
[04:06] <AgentArmstrong> i got a 500gb external
[04:06] <zhouyu> ow ok i'll try using xampp for ubuntu instead
[04:06] <itheos> i want to change its fs from ntfs to ext3 or 4
[04:06] <tsukiyomi> Hello any experts on dhcp servers??
[04:06] <tsukiyomi> i'm really stuck
[04:07] <itheos> what fs would be right for the external disk? ext4?
[04:07] <billy> can any1 tell me how to make a mafia mmorpg? pm plz
[04:08] <itheos> ??
[04:09] <AgentArmstrong> tsukiyomi win32 or linux
[04:10] <mikewatt> I DID
[04:10] <mikewatt> xev
[04:10] <teamtrimble> please i am going mad trying to install this printer...
[04:10] <danny> does ubuntu have a usb drive edition?
[04:11] <mikewatt> Hi maco
[04:11] <AgentArmstrong> tsukiyomi
[04:11] <snxs> billy u for real ? lol
[04:11] <teamtrimble> danny, Ubuntu has several ways to install to USB drive
[04:11] <__schism__> hey guys I am trying to format a usb stick as a bootable freedos drive and I am totaly not getting how to do it. I am running ubuntu 9.10 can someone point me in the right direction? I have tried everything I can find and no luck
[04:11] <mikewatt> I tried tty1 and showkey
[04:11] <billy> ubunto has a usb burning software already installed if you have the newest version
[04:11] <maco> mikewatt: and what happened?
[04:11] <mikewatt> cannot return of FN+F7 AND FN+F8
[04:11] <teamtrimble> also for windows and linux there is unetbootin
[04:11] <itheos> ubunto seems t be a nice name too :D
[04:12] <billy> go to system administration then usb startup disk
[04:12] <mikewatt> HOW TO FIX THIS?
[04:12] <AgentArmstrong> unetbootin is nice :)
[04:12] <mikewatt> maco
[04:12] <__schism__> billy will it be a dos or nix enviroment?
[04:12] <danny> im trying to install ubuntu from a usb stick directly...since my dvd drive is physicallt broken
[04:12] <maco> mikewatt: it gives no codes to you when you hit those?
[04:13] <maco> mikewatt: then thats likely a kernel bug. fixing it would require writing a kernel patch. i suggest filing a bug if you're not up to that
[04:13] <billy> dont ask me stuff like that lol
[04:13] <teamtrimble> danny, what os are you on now?
[04:13] <danny> windows 7.....but i hav my partitions done already
[04:13] <mikewatt> keycode 28 shows sometime
[04:13] <tsukiyomi> AgentArmstrong i'm in ubuntu
[04:13] <wowoto> !free | wowoto
[04:13] <mikewatt> and I got a keycode 71
[04:14] <AgentArmstrong> what do you need help with?
[04:14] <teamtrimble> Unetbootin would probably be fastest/easiest for you
[04:14] <tsukiyomi> well this is my dhcpd.conf file subnet 192.168.1.0 netmask 255.255.255.0 {
[04:14] <tsukiyomi>   range 192.168.1.100 192.168.1.130;
[04:14] <tsukiyomi>   option domain-name-servers 200.54.144.227;
[04:14] <tsukiyomi>   option domain-name "ejemplo.com";
[04:14] <tsukiyomi>   option routers 192.168.1.1;
[04:14] <AgentArmstrong> unetbootin will do the work for you
[04:14] <FloodBot4> tsukiyomi: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[04:14] <tsukiyomi>   option broadcast-address 192.168.1.255;
[04:14] <AgentArmstrong> pm me
[04:14] <mikewatt> How to filing this?
[04:14] <tsukiyomi> and when i try to run the server i get this:
[04:14] <mikewatt> What should I report?
[04:14] <maco> mikewatt: were 28 and 71 when you hit fn+f7 and fn+f8 or when you hit other junk?
[04:15] <AgentArmstrong> pm me tsukiyomi
[04:16] <tsukiyomi> No subnet declaration for eth0 (0.0.0.0).
[04:16] <tsukiyomi> Mar 22 18:56:49 tsukiyomi-laptop dhcpd: ** Ignoring requests on eth0.  If this is not what
[04:16] <tsukiyomi> Mar 22 18:56:49 tsukiyomi-laptop dhcpd:    you want, please write a subnet declaration
[04:16] <tsukiyomi> Mar 22 18:56:49 tsukiyomi-laptop dhcpd:    in your dhcpd.conf file for the network segment
[04:16] <tsukiyomi> Mar 22 18:56:49 tsukiyomi-laptop dhcpd:    to which interface eth0 is attached. **
[04:16] <FloodBot4> tsukiyomi: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[04:16] <tsukiyomi> Mar 22 18:56:49 tsukiyomi-laptop dhcpd:
[04:16] <mikewatt> I hit fn+f8 at first and nothing come back so I hold these keys and I see 71. but when I try that again nothing returns.
[04:16] <maco> !paste | tsukiyomi
[04:16] <Gartral> anyone know of a program that measures the speed of text flying through a console window?
[04:17] <mikewatt> So I hit F7 F8 one by one and F7 returns 65 F8 returns 66.
[04:17] <teamtrimble> OK...so can anyone respond to my printer issue?
[04:17] <maco> mikewatt: the individual keys and the with-fn will give different numbers
[04:17] <hub_cap> quit:
[04:17] <maco> mikewatt: its the with-fn numbers that are needed
[04:17] <mikewatt> What`s going on of this case, maco?
[04:17] <hub_cap> :quit
[04:18] <mikewatt> yes I tried.
[04:18] <maco> mikewatt: im asking a friend
[04:18] <maco> mikewatt: is it a dell?
[04:19] <pastyhermit> Are there any good editors that will give me a split vertical window?
[04:20] <__schism__> pastyhermit txt or file?
[04:20] <mikewatt> My mistake. I tried it again and found the 28 returns by ENTER
[04:20] <johnny5> hi
[04:20] <pastyhermit> well for my purposes java
[04:20] <mikewatt> 71 returns by FN+7
[04:20] <__schism__> no help then sorry :(
[04:20] <pastyhermit> should have syntax highlighting
[04:20] <johnny5> anyone out there
[04:20] <imhere> WTF is ubuntu?
[04:20] <pastyhermit> notepad++ is good but ...
[04:20] <johnny5> its a sandwhich
[04:20] <maco> mikewatt: fn+7 or fn+f7?
[04:20] <imhere> seriously
[04:20] <maco> imhere: an operating system
[04:21] <mikewatt> No it`s a COMPAQ.
[04:21] <imhere> for pc?
[04:21] <mikewatt> FN+7
[04:21] <xumuk> imhere, o_O
[04:21] <imhere> where can I learn more?
[04:21] <maco> imhere: mostly, though there is a community maintained powerpc version if youre thinking old mac...
[04:21] <billy> can i download and install a new distro without having to lose my files or make a disk?
[04:21] <maco> imhere: more info at http://ubuntu.com
[04:21] <mikewatt> DELL has this issue too?
[04:22] <maco> mikewatt: dell intentionally disabled the brightness keys in their bios ;-)
[04:22] <sobczyk> hi, is it possible to disable battery charging when on ac power?
[04:22] <pastyhermit> Komodo Edit :D
[04:22] <maco> mikewatt: they only work on dell if you install the newest bios version available
[04:22] <imhere> cheers I just saw ur name mentioned on a few forums and thought id check it out
[04:22] <maco> imhere: ah well, welcome
[04:22] <xisor> anyone here running an atom 330 system + ion with kubuntu or ubuntu?
[04:22] <mikewatt> I can adjust brightness on Windows 7 but no brightness bar.
[04:23] <xumuk> imhere, what OS are you using?
[04:23] <maco> mikewatt: yeah but windows sometimes chooses to ignore the hardware capabilities the bios reports ;-)
[04:23] <maco> mikewatt: anyway... ok so fn+7 is your brightness down and fn+8 is up?
[04:23] <maco> mikewatt: and fn+7 gives 71 in showkey and fn+8 does nothing?
[04:23] <johnny5> ?
[04:24] <mikewatt> No, F7 is up and F8 is down.
[04:24] <imhere> win 7  got: 15tb win7 ultimate, 6gb ram, gtx275
[04:24] <johnny5> what directory is your printer installed
[04:24] <mikewatt> Do you need my DSDT?
[04:24] <Zenker> for some reason my middle mouse click dosent work anymore, it will scroll pages up and down but not side scroll, can someone help me fix it?
[04:24] <mikewatt> FN+8 haven`t tried.
[04:24] <xisor> is there a separate channel specific to kubuntu?
[04:25] <maco> mikewatt: hrmph. silly ui. everybody knows down goes on the left. anyway... ok you need to file a bug for fn+8 not doing anything at all. that'd be "ubuntu-bug linux" and one of the more-kernel-knowledgeable people will ask you for whatever other info is needed
[04:25] <johnny5> what is edubuntu
[04:25] <maco> mikewatt: oh. well try fn+8 :P
[04:25] <mortici> blahh having a hell of a time trying to OC my desktop, got pissed and set it to auto, with a forced FSB of 1066 and RAM speed of 1066 and called it a day lol
[04:25] <johnny5> how do u install XEN
[04:25] <mikewatt> FN+7 is nothing.
[04:25] <Zenker> edbuntu is a kubuntu educational suite for ubuntu, it has all sorts of educational progs
[04:25] <maco> johnny5: an educational (like for children or classrooms) version (or addon pack nowadays i think) of ubuntu
[04:25] <johnny5> thanks Zenk
[04:25] <mikewatt> FN+F7 IS BRTNS UP
[04:25] <Zenker> np
[04:26] <imhere> xumuk  why would I change from windows I will but I dont ghet it what are the pros ect
[04:26] <johnny5> what is a good way to learn all the command line jargon for learning the basics of directories file structures of linux
[04:26] <maco> mikewatt: oy im getting confused. fn+f7 is brightness up and fn+8 is down? or fn+f8 is down?
[04:26] <xp> i cant install metasploit
[04:26] <johnny5> basic navigation but via the command line
[04:26] <bastidrazor> !cli | johnny5 check this page out
[04:27] <johnny5> i know the man command
[04:27] <Zenker> johnny5 also it would help 2 read up on linux
[04:27] <johnny5> but i mean within the terminal.. what is ./etc for.. or /dev
[04:27] <johnny5> where do i find my hardware installed
[04:27] <billy> does any1 know ANYTHING about  web design? pm me please
[04:27] <mikewatt> YES FN+F7 IS brightness up FN+F8 IS DOWN.
[04:27] <mikewatt> FN+8 returns 72
[04:27] <Zenker> johnny5 ./ runs an executable program dont know what /dev is but u can type /h for any command
[04:28] <harish_> darolu, iam unable to install 64bit in my system
[04:28] <bastidrazor> johnny5: you read the page linked that fast?
[04:28] <mikewatt> maco I tried FN+8 it returns keycode 72
[04:28] <johnny5> yes
[04:28] <johnny5> im a speed reader
[04:29] <johnny5> i want to configure my profile via the shell
[04:29] <Zenker> can someone help me with my middle mouse button click, for some reason it no longer works
[04:29] <harish_> darolu_, iam unable to install 64bit in my system
[04:29] <mikewatt> How can I file a bug of my case?
[04:29] <billy> buy a new mouse
[04:29] <bastidrazor> johnny5: then how in the world did you miss the section called System Information Commands ?
[04:29] <maco2> mikewatt: sorry my battery died
[04:29] <johnny5> where
[04:29] <DaveLu> I thought I had removed all conky files, but when I type conky in Terminal it shows up on my desktop
[04:29] <mikewatt> Never mind
[04:29] <Zenker> billy i didnt ask for a smart a**d comment
[04:29] <johnny5> im new
[04:29] <johnny5> i want to learn linux
[04:30] <billy> well u asked 4 advice lol
[04:30] <johnny5> but i want to do mostly everything via the command line
[04:30] <mikewatt> SO maco, how can I file a bug of my case.
[04:30] <Zenker> the button works in windows, i made sure it did b4 asking for help, in ubuntu when i click it it acts as if its button 1
[04:30] <johnny5> within the terminal
[04:30] <bastidrazor> johnny5: read the page linked to you by ubottu .. it has everything you need to start.
[04:30] <maco2> imhere: dunno if anyone answered you. only about 30 viruses have ever been released for linux, so its got that going for it. the software is all free to share.  pretty open development process if you want to get involved, request features, etc...
[04:30] <johnny5> where is this link
[04:30] <johnny5> where do i find it
[04:30] <mikewatt> I hope Ubuntu people can release a fix of this.
[04:30] <Zenker> scroll up johnny5 it should still be there
[04:31] <johnny5> ok ty
[04:31] <bastidrazor> johnny5: https://help.ubuntu.com/community/UsingTheTerminal
[04:31] <DaveLu> how do I find this conky file
[04:31] <mikewatt> maco2
[04:31] <maco2> mikewatt: if either of the hotkeys you need didnt give anything in showkey, you need to file a kernel bug "ubuntu-bug linux" though testing with the 10.04 beta live cd to see if its already fixed there is recommended
[04:31] <kokoa> I have an open question in #xubuntu regarding desktop effects if anyone would like to help, thanks
[04:31] <billy> zenker make sure u have the right hardware driver installed as it could think you have an old 2 button mouse
[04:32] <imhere> can anyone tellme whty id go from win7 to this? seriously I will if its worth it
[04:32] <Zenker> billy it worked fine b4, and i havent changed any settings at all
[04:32] <teamtrimble> yay i rtfm again and saw what i missed
[04:32] <Zenker> i have also tried restarting n everything 2, all the basic trouble shooting things
[04:32] <billy> if your on linux now and windows before you mightn ot have the correct driver installed
[04:33] <mikewatt> I filed a bug here yesterday. https://bugzilla.kernel.org/
[04:33] <Zenker> billy now how would the driver change because i dual boot from ubuntu to windows and back again?
[04:33] <johnny5> cant find the link
[04:33] <maco2> mikewatt: if they are showing with showkey but not xev, look here https://wiki.ubuntu.com/Hotkeys/Troubleshooting
[04:33] <Gartral> pastebinit isnt posting my text files...
[04:34] <billy> m8 fuck off zenker people try to help and u mouth em off
[04:34] <maco2> imhere: "no viruses" usually make people jump ;-)
[04:34] <mikewatt> I tried Ubuntu 8.04 and 8.10 9.10 this bug still there.
[04:34] <maco2> imhere: like i said, about 30 ever, versus a few million for windows, and none of those 30 in the last few years
[04:34] <ProjectxSorrow> language children
[04:34] <billy> sorry
[04:35] <maco2> mikewatt: which doent mean its not fixed in 10.04 ;-) it *could* be so its good to test
[04:35] <Zenker> https://help.ubuntu.com/community/UsingTheTerminal   johnny5 here it is
[04:35] <marcosroriz> Hi guys, I'll be installing Ubuntu again on my notebook. I had some troubles with other distros. Should I go with Lucid? I mean is lucid 'ready' to use?
[04:35] <maco2> imhere: the package management system is pretty nice too
[04:35] <teamtrimble> idk that I would say yes
[04:35] <mikewatt>  if they are showing with showkey but not xev. What`s that suppose  to mean?
[04:35] <Zenker> billy wtf was that, NOW IM MOUTHING OFF U BASTARD!!!!! IM SIMPLY EXPLAINING THE ISSUE, YOUR THE ONE WITH THE ATTITUED
[04:35] <Gartral> pastebinit isnt posting my text files... it just returns the pastebin.com homepage link
[04:36] <Losha> marcosroriz: no, it's still in beta i.e. full of bugs. Try 8.04 LTS
[04:36] <maco2> imhere: my brother likes that instead of clicking next 10 time after searching all over the internet for the software you want... with this, theres a program called Software Center that lets you just pick the software you want out of a list and it downloads and installs it for you
[04:36] <Random832> !language | billy, Zenker
[04:36] <bastidrazor> !lucid | marcosroriz
[04:36] <Losha> Zenker: regardless of provocation, please keep it civil...
[04:36] <Zenker> Losha true, sorry, but still
[04:36] <maco2> mikewatt: we established that xev didnt see them
[04:37] <maco2> mikewatt: so if showkey did show a code when you clicked the hotkey you want, check out that wiki page for the rest of the "how to report it" info
[04:37] <Random832> Zenker, what kind of mouse is it?
[04:37] <Zenker> its a Logitech m305 wireless
[04:37] <mikewatt> But it did not.
[04:38] <mikewatt> That`s a problem.
[04:38] <ezhangin> hello!
[04:38] <Losha> Gartral: This is a known bug in pastebinit. An effective workaround is to manually install the pastebinit package from lucid via http://packages.ubuntu.com/lucid/pastebinit
[04:38] <johnny5> i need help
[04:38] <johnny5> where is this link
[04:38] <bastidrazor> johnny5: https://help.ubuntu.com/community/UsingTheTerminal
[04:38] <maco2> mikewatt: ok then in the terminal "ubuntu-bug linux" will let you report a kernel bug to launchpad.net
[04:38] <Zenker> should i attempt to uninstall/reinstall the driver?
[04:38] <johnny5> how do u install XEN
[04:38] <ezhangin> can anyone tell me if there are any fundamental differences in the kernel between the desktop and server flavors of ubuntu?
[04:38] <harish_> i have a 32bit in my system and am trying to move to 64bit....i am getting boot error
[04:38] <harish_> any help
[04:38] <billy> johnny5: https://help.ubuntu.com/community/UsingTheTerminal
[04:39]  * johnny5 is very confused
[04:39] <ezhangin> i turned my server into a media server and the gnome desktop environment is pretty sluggish
[04:39] <mikewatt> What info needed to report according to my situation?
[04:39] <johnny5> why is ubuntu so easy and detects everything but Centos is so complexed and doesnt detect hardware efficiently
[04:40] <billy> so your accepting its might be the driver now eh  zenker
[04:40] <johnny5> XBMC for media center
[04:40] <maco2> johnny5: centos is like rhel, so its using a much older codebase
[04:40] <johnny5> im trying to get LINUX+ certified than RHEL
[04:40] <maco2> mikewatt: that wiki page will also tell you that ;-)
[04:40] <johnny5> i have a long way to go
[04:40] <Losha> johnny5: because ubuntu is better....
[04:40] <johnny5> i just dont know where to start
[04:40] <ezhangin> johnny5 actually i do have XBMX installed and it's not bad
[04:40] <ezhangin> not sure why a 3.06GHz Core2 with 4 GB of RAM is sluggish
[04:40] <Zenker> no im accepting it might be something that screwed up the driver, u suggested that the driver was incorrect, i said it was the correct driver but somehting may be interfearing with its normal usage
[04:40] <maco2> johnny5: well better know how to use rpm and yum
[04:41] <ezhangin> maybe it's the epic torrenting i don't know
[04:41] <johnny5> i want to understand everything via the command line rather than all goey.. cause they make it so easy for u, but when it comes to troubleshooting u r clueless
[04:41] <maco2> johnny5: and know what all goes in /etc/sysconfig (a directory non-redhat systems dont have)
[04:41] <Losha> johnny5: I agree with your sentiment. It does take time, however...
[04:41] <johnny5> ok so explore /etc/sysconfig
[04:41] <mikewatt> Ok thanks for the tip.
[04:42] <billy> anyone here heard of Jolicloud
[04:43] <Roasted_> wut
[04:43] <harish__> anyone who can help me installing 64bit
[04:43] <johnny5> is it hard to use XEN in ubuntu
[04:43] <harish__> i am getting "boot error" while trying to install 64bit from live usb
[04:44] <imhere> can I put this on my ps3?
[04:44] <johnny5> use yellowdog for ps3
[04:44] <imhere> ok thanks
[04:44] <Zenker> harish__ will it boot from the usb at all as in live cd?
[04:45] <harish__> Zenker, as soon as i restart my sytem, it just says boot error
[04:45] <harish__> any key i press, it takes me to existing 32bit
[04:45] <johnny5> how do u join another irc server
[04:45] <Zenker> harish__ is your usb configured to boot?
[04:45] <harish__> Zenker, yes, i configured it
[04:45] <snxs>  ./join #channel
[04:46] <snxs> oh server
[04:46] <harish__> Zenker, i have installed the existing 32bit through usb
[04:46] <snxs>  ./server (server)
[04:46] <johnny5> u need to configure your kernel and install the updated kernel
[04:46] <Zenker> harish__ have you checked to make sure the install on the usb is good. when i first tried the 64 something didnt go right and i had to re download
[04:47] <johnny5> make sure your boot directory is using grub
[04:47] <xiong> johnny5, If you're using XChat, try the menu XChat -> Network List...
[04:47] <harish__> Zenker i did md5sum to check whether the install is good or not
[04:47] <harish__> it is good
[04:47] <johnny5> how pjotr
[04:47] <johnny5> whois harish
[04:47] <Zenker> hmm, i guess thats about all i can suggest im still a noob :(
[04:48] <harish__> Zenker, is there a way to install 64bit from the existing 32bit...how did you install?
[04:48] <ProjectxSorrow> repartiton then install
[04:48] <Zenker> i would try and re dl it anyhow, it only takes a few mins, i installed from a dvd
[04:49] <nathanjd_> Hi I'm trying to patch libsndfile as described here: http://sed.free.fr/aifc2wav.html. Where do I go to get help doing do?
[04:49] <johnny5> question may be a wierd one but
[04:49] <ubuntu> nick/hulu
[04:49] <ubuntu> nick/ hulu
[04:49] <maco> harish__: you cant change architectures witout reinstalling
[04:50] <Zenker> harish__ it may be that the usb device isnt bootable, idk much about booting from things like that though
[04:50] <broadway> hey everyone
[04:50] <johnny5> if u have UNUNTU as primary OS and u install a virtual XP on XEN, can u access physical hardware on the XP VM such as usb drives floppies and external drives within the VM of XP
[04:50] <ProjectxSorrow> what program did you use to make it bootable
[04:51] <harish__> ProjectxSorrow, i used usb startup disk creator
[04:51] <Zenker> can someone tell me how 2 diagnose the reason my mmb click no longer works?
[04:51] <GlassEyelid> not sure about xen but with vmware you can access usb etc
[04:51] <johnny5> what is MMB
[04:51] <ProjectxSorrow> harish_:fail use unetbootin
[04:51] <Zenker> middle mouse button
[04:51] <ProjectxSorrow> harish_:works everytime
[04:51] <johnny5> what virtualization program do u guys use on ubuntu
[04:51] <Vitito> acerbic aspire one a110 ad card deos not work
[04:52] <harish__> ProjectxSorrow, initially i tried through unetbootin..i got the same error
[04:52] <darolu_> johnny5: most people use VirtualBox, but there are others
[04:52] <DasEi> johnny5: vbox
[04:52] <harish__> later someone suggested to do it thru usb startup disk creator
[04:52] <xumuk> johnny5, vbox
[04:52] <johnny5> thanks.. so i can download vbox
[04:52] <ProjectxSorrow> harish_:really what type of usb do you have if its hp brand get a new one
[04:52] <johnny5> im using ubuntu 9.04
[04:53] <darolu_> johnny5: I recommend you to download the one from Sun's website as the one in Ubuntu repos doesn't have USB support
[04:53] <DasEi> johnny5: best is to add their repos and not use the ose from synaptic, unless you're a commercial, better functions then
[04:53] <harish__> ProjectxSorrow, i have kingston 4gb....i have the existing 32bit installed through the same usb
[04:53] <johnny5> what is synaptic
[04:53] <ProjectxSorrow> harish_:well sounds like thats your problem
[04:54] <johnny5> its the default installer
[04:54] <Roasted_> WUT
[04:54] <ProjectxSorrow> harish_:archtitures are probably conflicting on boot
[04:54] <DasEi> !info synaptic | johnny5
[04:54] <johnny5> !info synaptic
[04:54] <johnny5> sweet! ty!
[04:54] <DasEi> np
[04:54] <johnny5> !info vbox
[04:54] <harish__> ProjectxSorrow, if i partition the disk thru gparted and install 64bit...does the architecture change?
[04:55] <nathanjd_> I'm trying to patch libsndfile as described here: http://sed.free.fr/aifc2wav.html. Where do I go to get help doing do? I need to convert caf/ima4 files
[04:55] <ProjectxSorrow> harish_:use reformat use unetbootin in windows if you can linux would work but no realiable and get back to me
[04:55] <ProjectxSorrow> harish_:yea
[04:55] <DasEi> johnny5: /query ubottu for fishing, destroys the channel being readable, one last :
[04:55] <DasEi> !info virtualbox
[04:55] <ProjectxSorrow> harish_:it should change
[04:55] <darolu> harish__: yes re-partitioning your pendrive works
[04:56] <darolu> !info virtualbox-3.1
[04:56] <ProjectxSorrow> oh by the way im a great tech ever need anything email me at Xsyndicate4life@aol.com
[04:56] <nizar306> help me
[04:56] <Zenker> whats the easiest way to uninstall and reinstall a mouse driver on a laptop with a touch pad?
[04:56] <harish__> darolu, i mean partitioning my hard disk..so that the existing 32bit will remain and install 64bit elsewhere in the disk
[04:56] <Johnnynewb5> Is there a big difference from Ubuntu 9.04 to 9.10
[04:56] <darolu> !info virtualbox-ose
[04:56] <darolu> Finally!
[04:56] <DasEi> !info virtualbox-ose > johnny5
[04:56] <ProjectxSorrow> harish_:oh you want to do that
[04:57] <ProjectxSorrow> harish_:never tried it myself
[04:57] <nizar306> why i cannot upgrade ubuntu lucid alternate from ubuntu 9.10
[04:57] <darolu> harish__: yes that works
[04:57] <Johnnynewb5> !info-virtualbox-ose
[04:57] <DasEi> nizar306: 'cause lucid isn't released yet ?
[04:57] <darolu> nizar306: Lucid is not stable yet, it is in Beta state
[04:57] <ProjectxSorrow> darolu:you sure that works sounds like it conflict to me
[04:57] <ProjectxSorrow> harish_:why do you want both anywho
[04:57] <nizar306> yup
[04:57] <nathanjd_> Where can I go for linux help? never used irc before
[04:57] <darolu> ProjectxSorrow: if you have them on separate partitions it works fine
[04:58] <Lanlost> Hey, I have a custom build of pulseaudio I made that is the same as the newest version. I'm trying to build-dep another program and its saying it HAS to upgrade pulse.. even though the version is the same (just without my changes). Is there anyway to stop this?
[04:58] <nizar306> i downloaded the beta realeses
[04:58] <Johnnynewb5> !info xbmc
[04:58] <wols> Johnnynewb5: what exactly do you need this VM for?
[04:58] <Lanlost> It's going to break my audio with jackd..
[04:58] <harish__> ProjectxSorrow, i just want 64bit...but i am not able to install it thru usb
[04:58] <Johnnynewb5> I need to have windows installed for work.. but lINUX is now going to be my primary OS
[04:58] <Johnnynewb5> i dont want to do a multiboot
[04:58] <Johnnynewb5> i prefer VM's
[04:58] <harish__> the only choice is install 64bit elsewhere..and if it works, remove 32bit
[04:58] <DasEi> Johnnynewb5: to play with the bot, use a pm
[04:58] <Johnnynewb5> for testing...
[04:58] <FloodBot4> Johnnynewb5: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[04:58] <Johnnynewb5> i want to install various OS's like Solaris and XP ontop of VBOX
[04:59] <ProjectxSorrow> darolu:well it sounds like itd be a linux conflicting windows dualboot if u installed windows second kind of thing
[04:59] <DasEi> Johnnynewb5:  can do that, #vbox is there, too
[04:59] <Zenker> can someone help me uninstall/reinstall my mouse driver?
[04:59] <Johnnynewb5> !info unetbootin
[04:59] <darolu> ProjectxSorrow: maybe, I haven't dualboot with windows in a while so I can't really tell
[04:59] <wols> Zenker: it's kinda hard to uninstall a mousedriver... pretty much impossible: it's part of the kernel and without kernel, well...
[05:00] <wols> Johnnynewb5: STOP that
[05:00] <Johnnynewb5> where do i find all my hardware installed, what directory within the terminal
[05:00] <Zenker> wols ohh tyank you for preventing me from messin up my sys
[05:00] <wols> Johnnynewb5: no more line from you which begin with !
[05:00] <Johnnynewb5> im confused why r they saying im flooding?
[05:00] <ProjectxSorrow> harish_:64 bits always been  kind of quirky its werid unetbootin wouldnt compile it for you on top the fact a disk is always realiable
[05:00] <darolu> Johnnynewb5: try typing "/msg ubottu !info" and don't flood the channel
[05:00] <darolu> not*
[05:01] <wols> Johnnynewb5: cause you are. if you want to query the bot, use /msg ubottu info <package>
[05:01] <millertimek1a2m3> hey I joined the pygtk channel and there's only one other guy in there... where's the real channel?
[05:01] <Zenker> does anyone have a suggestion for why my middle mouse button no longer clicks, this is a big issue for me because of blender
[05:01] <DasEi> Johnnynewb5:  see above ,  ... /query ubottu     << in your messenger, there can play with the bot
[05:01] <nizar306> ada org indo?
[05:01] <Johnnynewb5> wols
[05:01] <ProjectxSorrow> Zenker:what os are you using
[05:01] <wols> millertimek1a2m3: use python
[05:01] <harish__> ProjectxSorrow, how do i differentiate, the portion of the disk which is unused...i am not able to differentiate it in gparted
[05:02] <Zenker> projectxsorrow ubuntu 9.10
[05:02] <wols> millertimek1a2m3: #python that is...
[05:02] <ProjectxSorrow> Zenker:what laptop?
[05:02] <Losha> Johnnynewb5: or surf the bot at http://ubottu.com/factoids.cgi, easier...
[05:02] <Zenker> dell vostro a860
[05:02] <millertimek1a2m3> wols, I plan to learn python after I finish up learning up on gtkmm
[05:02] <nizar306> what the good mmorpg games on ubuntu?
[05:02]  * wols puts Johnnynewb5 on ignore
[05:02] <Zenker> intel core duo 2.0ghz, intel vid,
[05:02] <Johnnynewb5> wols
[05:02] <Johnnynewb5> i need your help
[05:02] <wols> millertimek1a2m3: instead of using #pygtk, use #python
[05:02] <ProjectxSorrow> harish_:mmmm um you should be able to tell run cfdisk instead
[05:03] <Johnnynewb5> u r sending me all this stuff on flooding, im not doing anything intentional
[05:03] <millertimek1a2m3> wols, I understand
[05:03] <Johnnynewb5> pls bare with me a minute
[05:03] <ProjectxSorrow> Zenker:mmmmmm hold on let me think about this.....whats the problem again(in detail please)
[05:03] <Johnnynewb5> im new here and im trying to learn, i know the basics of IRC chat commands.. but how am i flodding??
[05:04] <ProjectxSorrow> harish_:cfdisk do you anygood
[05:04] <Johnnynewb5> !info ubuntu
[05:04] <bastidrazor> Johnnynewb5: did you read the page i linked you three times? it has most of the information you've asked about.
[05:04] <Johnnynewb5> !cfdisk
[05:04] <darolu> Johnnynewb5: do your test somewhere else, this channel is for Ubuntu support ONLY, I suggest you to message the bot "/msg ubottu !info" you may get banned by an op if you keep posting off-topic stuff
[05:04] <shauno> Johnnynewb5: short version, sending a lot of traffic to the channel that isn't beneficial to anyone.  especially when there's a method setup so that you can play with the bot without doing that
[05:05] <Johnnynewb5> ok sorry
[05:05] <mikewatt> HI people.
[05:05] <Johnnynewb5> i am asking legit ubuntu questions
[05:05] <Zenker> projectxsorrow i have a logitech m305 wireless mouse connected via usb, for some reason my middle mouse button no longer clicks, i tried all the basic trouble shooting things like removing and re-attaching, resetting the mouse, rebooting, checked it in windows n it worked fine, and disabling compiz. it does scroll up and down and when i click the mmb it acts as if its button 1
[05:05] <Johnnynewb5> someone typed to me to put in "!info than subject" so be understanding
[05:06] <mikewatt> My computer also have a issue of popping noise when wake form sleep.
[05:06] <mikewatt> Anyone has this issue too?
[05:06] <ProjectxSorrow> Zenker:ooo thats a tough one sounds like config file has you mouse mapped wrong
[05:06] <Johnnynewb5> What is the basic directory that holds all your installed hardware
[05:06] <wols> Zenker: I guess the mouse has worked before as intended? anything special you changed?
[05:06] <roberj13> Are there a lot more bugs in 10.04 right now than I would want to deal with? I am trying to get display working properly and am trying to see if that will help.
[05:06] <bastidrazor> Johnnynewb5: the page i linked you tells you all this.
[05:07] <Zenker> projectxsorrow thats what i was thinking,
[05:07] <wols> roberj13: #ubuntu+1
[05:07] <PsychoticEGG> So I changed my sound settings from the default over to my sound card and everything worked and sounded great. I just restarted my computer and it went back to default. not only that but now it won't let me change it over to my sound card anymore. help?
[05:07] <Johnnynewb5> ok bast where is this link
[05:07] <Zenker> wols the only thing i hvae dl'd today was the fusion icon
[05:07] <darolu> Johnnynewb5: open a terminal and type "man hier"
[05:07] <basix> hello people! So what FS do you guys use to share stuff between Win 7 and Ubuntu? I'm having a tough time configuring Samba ( Win 7 is a ***** ) =/ I tried NFS but apparently not all versions of Win 7 have NFS capability. What are my options?
[05:07] <ProjectxSorrow> Zenker:this is a question for anybody helping this guy out anybody kknow how to map a mouse in ubuntu i cant remeber
[05:07] <bastidrazor> johnny5: https://help.ubuntu.com/community/UsingTheTerminal
[05:07] <coz_> roberj13,  which display is this and which video card?
[05:07] <harish__> ProjectxSorrow, what is an extended file system in disk?
[05:07] <DasEi> Johnnynewb5: that can't be seen that way, there is /dev and it's subfolders, but ubuntu works with modules loaded into kernel, there are way to list hardware, though
[05:08] <Johnnynewb5> ty cool
[05:08] <roberj13> coz_, display on my hp dv6, intel integrated, with i3
[05:08] <Zenker> projectxsorrow i did find a program, but u have 2 manually install and config it, its way beyond me
[05:08] <darolu> ProjectxSorrow: you can configure mouse map with xorg.conf file, I missed who asked but he/she can google for "xorg.conf mouse"
[05:08] <Johnnynewb5> this is a very resourceful channel, guys i appreciate it big time
[05:08] <wols> Zenker: can you cut+paste with the middle mouse button?
[05:09] <ProjectxSorrow> harish_:if i know what i think your talking about its a swap like in windows installiation unless your talking about the file type in that case its asically the file system ubuntu uses to work basically
[05:09] <Johnnynewb5> i am a serious learner, im in no way here to flood or cause problems.. i appreciate everyones help, i got the link bast
[05:09] <coz_> roberj13,  mm ok   I am not sure if lucid has better intel drivers or not...I guess the suggestion to go to #ubuntu+1  might be a good to find if the driver has been updated or not
[05:09] <bastidrazor> Johnnynewb5: your failure to listen is not appreciated.
[05:09] <Zenker> hmm, now its doing nothing at all
[05:09] <DasEi> Johnnynewb5: for hardware : lspci, lsusb, lshw (all in trml)
[05:09] <Zenker> maybe the mouse is failing
[05:10] <Zenker> im gonna get my other one and see if it works or not, brb
[05:10] <harish__> ProjectxSorrow, i am looking at the gparted window and trying to find suitable place on my hard disk to install 64bit
[05:10] <ProjectxSorrow> Zenker:i bet that program you fund makes it work lol
[05:10] <xp> some one tell me please
[05:10] <harish__> it says extended file type....so, checking if this place is alright to install 64bit
[05:10] <wols> harish__: fdisk -l   pastebin the output
[05:10] <roberj13> coz_, thanks, didn't realize there was a separate channel.
[05:10] <xp> how can i install metasplit
[05:10] <xp> metasplit
[05:10] <ProjectxSorrow> harish_:do what wols said thats one of those things id have to look at
[05:11] <coz_> roberj13,  no problem...
[05:11] <xp> metasploit
[05:11] <xp> how i install it
[05:11] <harish__> wols, fdisk -l doesnt yeild any output
[05:11] <mikewatt> Hi everyone pls check this out. http://superuser.com/questions/70435/sound-crackling-popping-in-ubuntu-9-10
[05:11] <wols> harish__: use sudo
[05:11] <darolu> harish__: try with "sudo"
[05:11] <ProjectxSorrow> xp:search metasploit in google or download bactrack 4 its awesome sercurtiy penertration
[05:12] <xp> i do it but dosent work
[05:12] <ProjectxSorrow> xp:what os
[05:12] <wols> !errors | xp
[05:12] <xp> ok
[05:13] <harish__> wols, i have the output....shall i paste it here?
[05:13] <Zenker> OK! phew, my other mouse is working just fine i guess ill just have 2 swap out with my wife and let her think hers is broke lmao
[05:13] <mikewatt> http://www.product-reviews.net/2009/11/09/ubuntu-910-karmic-koala-popping-audio-fix/
[05:13] <basix> harish__: use pastebin
[05:13] <wols> harish__: use a pastebin. also give us the output of "df"
[05:13] <Johnnynewb5> is pastebin used with "!pastebin"
[05:13] <mikewatt> Ubuntu 9.10 seems have a lot of bugs.
[05:13] <wols> mikewatt: what's the point of pasting random urls?
[05:13] <Zenker> oh projectxsorrow heres the page for that prog if you're interested   http://www.linuxquestions.org/questions/slackware-14/why-is-my-mouse-wheel-not-working-111394/
[05:14] <xumuk> mikewatt,  for example? o_O
[05:14] <xp> i want to know
[05:14] <Zenker> thank you guys for helping, i swear it worked fine 15 mins ago in windows, i guess it was just barely hanging on at that time
[05:14] <Johnnynewb5> what is the best way of getting a complete understanding for the file structure, and how to navigate and install uninstall and tweak ubuntu linux.
[05:14] <Johnnynewb5> without the GUI
[05:14] <xp> is metasploit  is same framework
[05:14] <ProjectxSorrow> harish_:yes past it and Zenker:ill look atit and lmfao thats funny you should swap it
[05:14] <wols> Johnnynewb5: install debian (and no, I'm not joking)
[05:15] <Johnnynewb5> anyone can use a GUI. but to truely understand LINUX u need to know what goes on behind the seens
[05:15] <Johnnynewb5> Scenes*
[05:15] <darolu> Johnnynewb5: for file structure type "man hier" in a terminal, just like I told you 20 mins ago
[05:15] <Explore2> I have text scanned in a .jpg file can i convert it to .txt?
[05:15] <wols> Johnnynewb5: to understand what goes on behind the scenes you need to become a programmer
[05:15] <Johnnynewb5> how do u stop a service is it ./service name stop
[05:15] <Zenker> Johnnynewb5 read up on linux, bash and remember you can always type commandname /h
[05:15] <mikewatt> If you r using INTEL HDA card when using this 9.10 version you will probably experience this popping noise.
[05:15] <wols> Zenker: you can use /h only on windows. on linux this never works
[05:16] <wols> tho, since your commandline is nonsensical, you might get a help screen
[05:16] <mikewatt> This never happen when I run Opensuse.
[05:17] <Johnnynewb5> is there a way to print a document via the command line with LP
[05:17] <Zenker> ugh, i hate when i do that its help commandname
[05:17] <ProjectxSorrow> THIS IS FOR EVERYONE: best linux book where i learned everything i know and go back for more is:A Practical Guide To Linux-Commands,Editors and shell programming byMark G.Sobell
[05:17] <harish__> wols, here is the output
[05:17] <harish__> Disk /dev/sda: 250.1 GB, 250059350016 bytes
[05:17] <harish__> 255 heads, 63 sectors/track, 30401 cylinders
[05:17] <harish__> Units = cylinders of 16065 * 512 = 8225280 bytes
[05:17] <harish__> Disk identifier: 0x8d1c8d1c
[05:17] <harish__>    Device Boot      Start         End      Blocks   Id  System
[05:17] <harish__> Partition 1 does not end on cylinder boundary.
[05:17] <harish__> Disk /dev/sdb: 4018 MB, 4018143232 bytes
[05:17] <wols> Zenker: on linux, it's "man <command>
[05:17] <harish__> 124 heads, 62 sectors/track, 1020 cylinders
[05:17] <harish__> Units = cylinders of 7688 * 512 = 3936256 bytes
[05:17] <FloodBot4> harish__: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[05:17] <Johnnynewb5> ty projectx
[05:17] <Johnnynewb5> i will get the book
[05:17] <Zenker> man is more complete for sure :)
[05:18] <harish__> Floodbot4, sorry..i was not aware
[05:18] <ProjectxSorrow> harish_:not gunna lie you should repartiton your whle disk and just install 64bit
[05:19] <Explore2> I have text scanned in a .jpg file can i convert it to .txt?
[05:19] <darolu> !paste > harish__
[05:19] <Zenker> ugh, i need to re read that stuff rofl
[05:19] <mikewatt> Ubuntu 9.10 (Karmic Koala): Are You Experiencing Problems?
[05:19] <wols> Explore2: apt-cache search ocr
[05:20] <ProjectxSorrow> Zenker:i stay rereading that book
[05:20]  * Zenker is smashing his "wifes" mouse with a hammer
[05:20] <ProjectxSorrow> ^haha
[05:20] <Explore2> wols:  i am installing tesseract-ocr
[05:21] <harish__> wols, here is the link to fdisk output http://paste.ubuntu.com/399695/plain/
[05:22] <ProjectxSorrow> alright im out guys if you need anything computers Email me at Xsyndicate4life@aol.com and be sure to check out http://yourserv.us/ my work website ill be on tomarrow between 9-10 am eastern time for anybody who needs help
[05:22] <wols> W T F? a pastebin you have to login to?
[05:22] <wols> someone jumped the shark there. bigtime
[05:22] <ProjectxSorrow> ^damage
[05:23] <darolu> Nice, there is "A practical guide to Ubuntu Linux" by Mark G. Sobell too
[05:23] <xumuk> harish__,  what is your problem?
[05:23] <ProjectxSorrow> darlou:is there imma check that out hats awesome
[05:23] <ProjectxSorrow> alright well anyways im out
[05:23] <darolu> night ProjectxSorrow thanks for sharing the book info
[05:23] <harish__> xumuk, i have been trying to overwrite 64bit on my existing 32bit
[05:23] <DasEi> wols: agree, oo
[05:24] <harish__> xumuk, its not getting replaced....so, thinking of using gparted and loading the 64bit elsewhere onthe disk
[05:24] <ProjectxSorrow> darolu:no problem good night to you and all of you and HAVE FUN!!! (darlou:check Mark G.sobell out well all of you hes a great source for linux information)
[05:25] <harish__> xumuk, tryin to find which place on the disk is free..thru gparted..but cant make out....so, i pasted the output in the link http://paste.ubuntu.com/399695/plain/
[05:25] <wols> harish__: resize your linux partition sda5
[05:25] <ProjectxSorrow> harish_:goodluck
[05:25] <harish__> ProjectxSorrow, thanks
[05:26] <wols> harish__: nothing is free. that's the point. you use gparted to resize sda5 and free some space
[05:26] <casemods> is there an IRC for transmission
[05:26] <wols> casemods: /msg alis list *transmission*
[05:27] <harish__> wols, what type of partition table i should select?
[05:27] <wols> harish__: what are your choices?
[05:28] <Torkiliuz> #ubuntu+1
[05:28] <DasEi> wols : I just checked, least pastebinit works again on lucid, though  now pasting to pastebin.com
[05:28] <harish__> wols, i have msdos, aix, amiga, bsd, dvh, gpt, mac, pc98, sun and loop
[05:29] <wols> harish__: msdos
[05:29] <casemods> Torkiliuz: what is that channel you posted?
[05:29] <xumuk> harish__, for what?
[05:29] <harish__> xumuk, for creating partition table
[05:29] <Torkiliuz> Lucid support channel
[05:30] <wols> DasEi: I tried to go to the paste.ubuntu.com paste harish__ gave the link for and it doesn't show me the paste but wants me to login into launchpad
[05:30] <xumuk> for what?) for which OS?
[05:30] <wols> DasEi: no link works. in short: whoever wrote that launchpad part or deh ubuntu pastebin is an idiot
[05:30] <DasEi> wols: yy, saw that.. what comes next ? paypal ??
[05:30] <wols> Torkiliuz: /join #ubuntu+1
[05:31] <wols> harish__: do NOT create a partition table. DO NOT!
[05:31] <wols> harish__: if you do ALL your data is gone
[05:31] <wols> harish__: before you do anything at all right now. make a backup of your full disk
[05:31] <harish__> wols, i have all the data backed up....no problem....i did create a partition table
[05:31] <harish__> wols, guide me from here
[05:31] <DasEi> wols: current pastebinit works by : pastebinit -b http://paste.ubuntu.com  /etc/fstab  (o'course no login)
[05:32] <Torkiliuz> wols: ty, but found out already, sorry for posting it like that...
[05:32] <Zenker> is there a way to make xchat not show me who has joined or quit etc
[05:33] <harish__> wols, how do i install the 64bit in the new partition?
[05:33] <wols> harish__: I won't hand hold and I won't spoonfeed
[05:33] <fatcake> That was a great thing to have as the first thing you see in a chat
[05:33] <wols> especially not on such an operation. if you created a new partition table for sda, your windows and your linux is now gone. restore from backup
[05:34] <xumuk> harish__, if you're looking for free space run 'gparted' and choose dev/sda (this's your HDD) green area shows free space on it
[05:34] <wols> xumuk: what makes you think there is free space?
[05:34] <harish__> wols, i dont have windows in my system
[05:34] <harish__> wols, i just have 9.10 32bit
[05:34] <xumuk> wols, IF it's there))
[05:34] <harish__> wols, i have all the data backed up from 32bit
[05:35] <xumuk> harish__, and what's your architecture? o_O
[05:35] <xfact> !hi | debrucool
[05:35] <xfact> debrucool, Hello I am Avi
[05:35] <wols> harish__: if you overwrote your partition table, not just your ubvuntu is gone but also your windows
[05:35] <harish__> xumuk, 64bit architecture
[05:35] <debrucool> hi hi
[05:35] <debrucool> tui ekhane fatafati
[05:35] <fatcake> When I start my computer it tells me that bootmgr is missing.  Is there a way I can download that file and apply it to my computer?
[05:35] <debrucool> ekhanei chat korlei to hoy
[05:36] <xfact> !english | debrucool
[05:36] <wols> fatcake: exact error message please?
[05:36] <harish__> wols, i dont have windows in my sytem...it was there sometime back...
[05:36] <DasEi> fatcake: which version of ubu ?
[05:36] <Losha> Zenker: click on the channel tab, unselect "show join/leave messages" or whatever it's called
[05:36] <ishu> fdddddddddd
[05:36] <wols> harish__: you have a windows partition at least
[05:36] <fatcake> bootmgr is missing
[05:36] <ishu> what m,a
[05:36] <harish__> wols, i have a windows partition
[05:36] <wols> harish__: two actually
[05:36] <xumuk> fatcake, did U install FreeBSD las time?))
[05:36] <fatcake> 9.10
[05:36] <ishu> hey there
[05:36] <DasEi> !who | fatcake
[05:36] <ishu> who is thereman
[05:37] <fatcake> I'm not sure what that means
[05:37] <wols> fatcake: this is a windows message. ##windows, not #ubuntu
[05:37] <ishu> who is there
[05:37] <DasEi> ishu: 1293 ppl around, need ubuntu help ?
[05:39] <xumuk> harish__,  so delete dev/sda5 & dev/sda6 , apply and selest something like USE ALL FREE SPACE FOR INSTALL
[05:40] <wols> xumuk: I would wait for the "df" and "mount" output
[05:41] <xumuk> wols, all he needs he has...
[05:41] <Zenker> losha i dont seem 2 have a channel tab n i dont see any show/join or anything like this, im using xchat 2.8.6 if that helps any
[05:41] <wols> xumuk: well, imho his problem is that he doesn't have what he actually needs. but I doubt if we can help him with getting it
[05:42] <Explore2> In file included from /usr/include/unistd.h:849,
[05:42] <Explore2>                  from tface.cpp:47:
[05:42] <Explore2> ../cutil/globals.h:46: error: previous declaration of ‘int optind’ with ‘C++’ linkage
[05:42] <Explore2> can anyone pls tell me about this error?
[05:42] <wols> Explore2: ##c
[05:42] <Losha> Zenker: there's no tab which says #ubuntu on it?
[05:42] <wols> Explore2: or ##c++ depending
[05:42] <mikewatt> How to check if UBUNTU ENABLES SPEEDSTEP AND FAN CONTROL?
[05:43] <wols> !caps
[05:43] <mikewatt> sorry
[05:43] <thunder> cc
[05:43] <DasEi> mikewatt: http://ubuntuforums.org/showthread.php?t=2780
[05:44] <mikewatt> how to see if Ubuntu enables CPU SPEEDSTEP and Fan CONTROL?
[05:44] <Guest41631> an as wkd ass
[05:44] <Zenker> losha nope rofl lemme change the options that made everything open in a new window rofl
[05:44] <afsal> hi,how 2 install pidgin 2.6.6 using terminal
[05:44] <wols> !info pidgin
[05:44] <wols> afsal: apt-get install pidgin
[05:44] <Guest41631> huana akis
[05:45] <Guest41631> hi dove
[05:45] <DasEi> !latest | afsal
[05:45] <xumuk> afsal  sudo apt-get install pidgin
[05:45] <afsal> which version will then be downloaded i need version 2.6.6
[05:45] <DasEi> !pm | mikewatt
[05:46] <xumuk> afsal, just copy this into the terminal  'sudo apt-get install pidgin'
[05:46] <DasEi>  mikewatt : this describes the installation of lmsensors, needed for speedcontrol
[05:46] <mikewatt> DasEi, how to check if the speedstep is enabled?
[05:46] <DasEi> mikewatt: intel I guess ?
[05:46] <mikewatt> yes INtel based CPU
[05:47] <wols> afsal: you need to backport it if it MUST be 2.6.6 (or wait until lucid is released)
[05:47] <ishu> tu nem kim da??
[05:47] <mikewatt> how to see if that`s working in Ubuntu?
[05:47] <wols> ishu: this is an english ONLY channel. we don't speak hindi or any other indian language
[05:48] <ishu> ok
[05:48] <mikewatt> DasEi, do you have any idea how to do that?
[05:48] <Losha> ishu: try #ubuntu-in
[05:48] <wols> mikewatt: cat /proc/cpuinfo
[05:48] <harish_> wols, how do i install 64bit in the new partition
[05:49] <ishu> hi wols, would you tell how to increase sixe of ubuntu partition?
[05:50] <wols> ishu: with gparted
[05:50] <wols> harish_: you download a 64bit iso image, burn it and boot frm it
[05:50] <DasEi> mikewatt: i did that longer ago, but stopped as it doesn't let you oc anymore, second, looking for it
[05:51] <wols> DasEi: it's OT, but you can OC with speedstep enabled just fine :)
[05:51] <Losha> ishu: http://www.howtogeek.com/forum/topic/how-increase-partition-size-in-ubuntu
[05:52] <mikewatt> how to check using terminal?
[05:52] <DasEi> wols:why ot, new to me, thx
[05:53] <DasEi> mikewatt: is powernowd installed ?
[05:53] <Losha> wols: as long as it's ubuntu you're overclocking, I find it very on-topic....
[05:53] <mikewatt> DasEi: how to do it?
[05:53] <wols> Losha: I'm a dyed in the wool debian zealot :P
[05:53] <DasEi> mikewatt: does cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies  or cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors               give output ?
[05:54] <wols> mikewatt: cat /proc/cpuinfo
[05:54] <mikewatt> g_available_frequencies
[05:54] <mikewatt> 1733000 1333000 1067000 800000
[05:54] <mikewatt> cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
[05:55] <DasEi> wols: if I remember right on my c2d you had to enable it in bios, which made oc impossible
[05:55] <mikewatt> conservative ondemand userspace powersave performance
[05:55] <Losha> wols: I gave debian a try a few weeks back and discovered it doesn't have drivers for my soundcard (Cirrus Logic CS 4614/22/24/30) so I came right back to Ubuntu...
[05:55] <DasEi> mikewatt: so least it's supported..so
[05:55] <mikewatt> Does these return shows speedstep enabled?
[05:55] <wols> DasEi: I run a E2160 @ 3.06 GHz (normally 1.8Ghz) with Speedstep enabled. both Speedstep and OC done in the BIOS
[05:56] <wols> Losha: /msg dpkg kmuto (only works if you are in #debian)
[05:56] <wols> but now I'm really OT and are even giving help how to install other distros... I better stop
[05:56] <mikewatt> DasEi: I got a problem when adjust brightness.
[05:56] <wols> mikewatt: yes it does. your CPU runs at 1,73GHz max?
[05:57] <mikewatt> yes wols.
[05:57] <Losha> wols: gosh, don't know how I could've missed *that*. Obscure much?
[05:57] <DasEi> wols: good to know, not general then, my mobo won't let me
[05:57] <DasEi> mikewatt: sudo apt-get install powernod
[05:57] <DasEi> mikewatt: sudo apt-get install powernowd  **^
[05:57] <mikewatt> powernod? what`s that?
[05:57] <Cosmos42> Hi everyone.  So I've got a bizarre problem with Karmic Koala if anyone wants to take a crack at it.
[05:58] <Losha> Cosmos42: go on, I bet we've heard it before...
[05:59] <Cosmos42> Okay, well when I try to click open any of my places (home folder, my documents, desktop, music, etc) the mouse indicates loading for a moment, and then nothing
[05:59] <Cosmos42> nothing opens
[05:59] <Zenker> ahaaa i finally found it, thank u losha :0
[05:59] <Cosmos42> no error message
[05:59] <Cosmos42> just nothing
[05:59] <Cosmos42> but doing a cd indicates the folders are there
[05:59] <DasEi> mikewatt: powernod was a typo, see above
[05:59] <wols> Cosmos42: alt+f2 ?
[05:59] <Cosmos42> and i can exchange files between them
[05:59] <Losha> Zenker: there must be a way to do it in the non-tabbed version?
[05:59] <DasEi> !info powernowd > mikewatt
[05:59] <mikewatt> typo?
[06:00] <DasEi> mikewatt: misstyped word
[06:00] <Zenker> i had 2 reattach all the windows then right click on the channel name then those options showd up
[06:00] <Cosmos42> Alt f2 doesn't even show them in the list of programs
[06:00] <Cosmos42> weird huh?
[06:00] <Losha> Zenker: and I just berated wols for the obscurity of *his* system. Sigh...
[06:00] <Cosmos42> but the terminal indicates that they're there
[06:01] <mikewatt> I didn`t see it in synaptic package manager.
[06:01] <wols> Cosmos42: log out of X, stop your displaymanager and log in at the console
[06:01] <DasEi> mikewatt: karmic ?
[06:01] <Zenker> losha i do this to myself all the time i get boared and start messin w options, then forget what i changed, heh, someday ill learn 2 stop messin w them rofl
[06:02] <mikewatt> yes
[06:02] <wols> there, run "startx" and click on the folder icons again. there should be some logs/errormessages on the terminal where you typed startx then
[06:02] <Cosmos42> Remind me how to o that again?
[06:02] <DasEi> mikewatt: sudo apt-get install powernowd
[06:02] <mikewatt> karmic
[06:02] <stsm> is there a ubuntu-mips that works?
[06:02] <Cosmos42> i'm a linux noob
[06:02] <thom_> Sorry,, I was trying to test Ubuntu Lucy (Lucid Lynx) beta1 on my comp. But can not be executed. But it's running well on VirtualBox. Anybody can explain this?
[06:02] <stsm> haha hi wols
[06:02] <dk1> Hi
[06:03] <DasEi> Cosmos42: do what ?
[06:03] <rsk> thom_ what can't be executed?
[06:03] <mikewatt> MY cpu is T2370 does that support?
[06:03] <Losha> Zenker: well, a basic option like that shouldn't be so difficult to find. This is why people use programmers for target practice before they shoot lawyers...
[06:03] <Zenker> roflmao sooo true losha soo true
[06:03] <Losha> thom_: someone in #ubuntu+1 probably can, which is where you should be asking...
[06:03] <thom_> @rsk_ it just gimme some error message. I couldn't get to live session
[06:03] <dk1> is there any scalability project for testing website scalibility , for example 1000 users have logged in at the same time ?
[06:04] <rsk> thom_ some error message is not good enough to be able to help you
[06:04] <casemods> is Ubuntu basically virus free?
[06:04] <rsk> casemods basicly
[06:04] <Explore2> can anyone pls help me in converting scanned to doc to text file?
[06:04] <thom_> Losha : I'll try it
[06:04] <thom_> rsk : ???
[06:04] <rsk> thom_ ???
[06:04] <casemods> rsk: is that because of the open source of all the programs?
[06:05] <mikewatt> DasEi: How about my CPU?
[06:05] <mikewatt> cpudyn
[06:05] <rsk> casemods yea and of the kernel
[06:05] <thom_> rsk : what i should explain anymore so I can get helped?
[06:05] <stsm> casemods, linux is not as vulnerable for virusses and malware like windows is, its not comparable
[06:05] <rsk> thom_ tell the message
[06:05] <Losha> casemods: no, it's because so few people use Ubuntu that no-one cares enough to write viruses for it...
[06:06] <Zenker> casemods check out these pages http://www.desktoplinux.com/articles/AT3307459975.html    and    http://librenix.com/?inode=21
[06:06] <thom_> Hmm.. it was about init bla bla bla I dont excatcly remember it
[06:06] <Cosmos42> okay i think i figured out how to do it hang on
[06:06] <phiberoptik> anybody here know a way to change the login screen in 9.10
[06:06] <phiberoptik> i know it was removed ;/
[06:06] <stsm> casemods, and this page has some nice parts aswell: http://en.wikipedia.org/wiki/Linux_malware
[06:07] <Explore2> can anyone pls help me in converting scanned to doc to text file?
[06:07] <stsm> ooh i'm a volunteer hahaha
[06:07] <stsm> (just an inside joke :p)
[06:07] <phiberoptik> Explore2 dcc send to me i'll do it in win7 ;p
[06:07] <mikewatt> i installed powernowed
[06:07] <phiberoptik> it'll take 5 sec
[06:07] <mikewatt> then what?
[06:07] <mikewatt> how to check?
[06:07] <Explore2> phiberoptik: how can i send to you?
[06:08] <phiberoptik> damn 9.10!!!
[06:08] <mikewatt> DasEi
[06:08] <phiberoptik> i wanna change my login window/background
[06:08] <Explore2> what?
[06:08] <mikewatt> are u still there?
[06:08] <stooj> uhm - am I going mad? "sudo mv archives/* /var/cache/apt-cacher/packages/" fails with "sudo: unable to execute /bin/mv: Argument list too long
[06:08] <thom_> rsk : wait e minute. I'll try it to make it sure (the error msgs)
[06:09] <debrucool> I am facing lot of Noise while i am trying to listen to some music. I have yet tried banshee , songbird and rythmbox with no difference in effects. I have by now changed every volume control, with no result. So is there any solution by which I can reduce the NOISE problem?
[06:09] <mikewatt> Hi DasEi
[06:09] <casemods> should I use anti virus on ubuntu?
[06:09] <phiberoptik> seems like
[06:09] <phiberoptik> everybody here is asking a question
[06:09] <soreau> ! virus | casemods
[06:09] <phiberoptik> and there is no expert to answer them
[06:09] <phiberoptik> lol
[06:09] <bazhang> casemods, no
[06:09] <stsm> phiberoptik, some people answer too :p
[06:10] <DasEi> mikewatt: what did the installer say when finished ?
[06:10] <mikewatt> how to use powernowd?
[06:10] <hacker_kid> is there anyway to boost the maximum volume, my new sound card works great but 130% volume is what used to be 50%
[06:10] <Losha> phiberoptik: it varies greatly by time of day...
[06:10] <mikewatt> I installed using the Synaptic Package Manager.
[06:10] <stsm> does ubuntu also support mips ?
[06:11] <mikewatt> It said installed successfully.
[06:11] <DasEi> mikewatt: the command line let's yo see output ..
[06:11] <mikewatt> How to?
[06:11] <debrucool> how to reduce noise while listening to music i UBUNTU ?
[06:11] <mikewatt> Should I remove it and install it again using command line?
[06:12] <mikewatt> DasEI?
[06:12] <DasEi> mikewatt: no , I googled it meanwhile, cpu is supported
[06:12] <Losha> stooj: no, it just means there are so many files in archives/* that the buffer holding their names wasn't big enough. Move them in smaller groups e.g archive/[A-H]*
[06:12] <mikewatt> what does that kit do?
[06:13] <DasEi> mikewatt: please put my nick in your replies, else I loose them; man powernowd for your desired settings
[06:13] <Losha> debrucool: find out your soundcard chipset and then check google to see if it's a known problem...
[06:13] <mikewatt> DasEi: how to see if that`s working?
[06:14] <DasEi> mikewatt: it sets the speed of the procci to the needed speed, see above, lm-sensors
[06:14] <debrucool> Losha :how to find my soundcard chipset  ?
[06:14] <mikewatt> DasEi: I installed that but didn`t see the app.
[06:14] <stooj> Just reading the GNU core utils faq and came across that very thing. Thansk Losha !
[06:14] <stooj> *Thanks
[06:14] <debrucool> losha : what is a soundcard chipset ?
[06:14] <DasEi> mikewatt: did you follow the howto to lm-sensors ?
[06:15] <mikewatt> DasEi: yes I checked the this:This package controls CPU speed by using the sysfs interface to the CPUFreq
[06:15] <mikewatt> driver in v2.6 Linux kernels. It does not depend on APM or ACPI,
[06:15] <mikewatt> and it doesn't try to do anything other than control the CPU.
[06:15] <mikewatt> how to what?
[06:15] <phiberoptik> fuck this gnome, im installing KDE 4.40
[06:15] <wols> DasEi: why did you tell him to install powernowd?
[06:15] <Losha> debrucool: the chips on your soundcard that do all the work. Try  sudo lspci -v | egrep audio
[06:16] <DasEi> wols: to make the cpu scale automatically
[06:16] <wols> DasEi: and what make you think it didn't?
[06:16] <Losha> phiberoptik: no f-bombs please
[06:16] <DasEi> mikewatt: http://ubuntuforums.org/showthread.php?t=2780
[06:17] <DasEi> mikewatt: link from up^ , lm-sensors
[06:17] <wols> DasEi: do you know what  proc/cpuinfo is?
[06:17] <mikewatt> DasEi: I added a panel named CPU frequecy scalling is this the tool I installed?
[06:17] <DasEi> wols : I don't have a clue for now, as he didn't follow and used synaptic, so I have no feedback from trml right now
[06:18] <Explore2> phiberoptik: Hi, wil u help me in conversion to text?
[06:18] <wols> yes, the "no clue" thing is very apt.
[06:18] <wols> btw: this howto will NOT work as it is written (which is no miracle considering it'S from 2004
[06:18] <stsm> lol the arrogance returns badly
[06:19] <DasEi> wols : yes, and it's a T2370, but you can go on, if you like
[06:19] <stsm> there are multiple ways you can say things
[06:19] <stsm> polite being opnoe of the best ways
[06:19] <meo> hi all
[06:19] <mikewatt> DasEi: I checked that and intel website for my CPU info. My cpu support 6 steps but it only shows 4, any idea?
[06:19] <debrucool> Losha: I applied your code in the terminal and got this information about my sound systems "Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)"
[06:20] <debrucool> losha: what to do now ?
[06:20] <xfact> Good one
[06:20] <traeq> is there a program that will let me record, on windows, a microphone connected to my ubuntu box?
[06:20] <xfact> debrucool, wait for the reply, you may not get any, if he/she has no idea about it
[06:20] <Aciid> traeq: pulseaudio network capabilities
[06:21] <stsm> traeq, you mean record the sound of some ubuntu computer in your network, to your windows machine?
[06:21] <darolu> debrucool: I suppose your sound doesn't work.. do you have the little speaker icon on top-right corner?
[06:21] <mikewatt> wols: does powernowd support my CPU which is T2370?
[06:21] <disappearedng_> Hey my vim suddenly does not have -xterm_clipboard  after an update. What can I do?
[06:21] <traeq> stsm: i have a microphone connected to my ubuntu computer, i want to be able to use it on my windows machine
[06:22] <stsm> traeq, over the network i presume?
[06:22] <traeq> stsm: yes
[06:22] <casemods> can anyone help with bluetooth in ubuntu?
[06:22] <traeq> Aciid: i had suspected as much, but my attempts at googling didn't turn up anything particularly relevant. how do i configure pulseaudio to do it?
[06:22] <Losha> debrucool: dunno, I'm not familiar with the chipset. Maybe someone else knows?
[06:22] <stsm> traeq, you will need to stream the sound from the microphone, to your windows machine, it will have some delay in case that mathers
[06:23] <traeq> how much? lan latencies? compression?
[06:23] <debrucool> darolu : I have the icon. And my sound system does work. But theres too much noise , other wise its allright
[06:23] <darolu> debrucool: it can be hardware issue, do you get noise with headphones or other speakers?
[06:23] <Cosmos42> wols I'm sorry but could you clarify what you meant with startx?
[06:23] <ishu> hi emet
[06:24] <casemods> can anyone help with bluetooth in ubuntu?
[06:24] <emet> hi
[06:24] <wols> Cosmos42: /usr/bin/startx
[06:24] <debrucool> Darolu : I get noise in headphones'
[06:24] <xumuk> casemods, what's wrong with it?
[06:24] <stsm> traeq, i dunno i never had to do it, it wont be very much over lan for audio i presume
[06:24] <mikewatt> wols
[06:24] <traeq> stsm: that's okay
[06:24] <casemods> I don't know how to get it working xumuk I'm new to ubuntu
[06:24] <debrucool> darolu- not yet tried with speakers
[06:24] <stsm> traeq, VLC should be able to do this
[06:24] <phiberoptik> GDM2 my savior!
[06:24] <rocket16> Hello all
[06:24] <Explore2> wols: did u use ocr anytime?
[06:24] <mikewatt> wols: does my cpu supported by powernowd?
[06:25] <stsm> traeq, but will you use it to trigger something or anything like that?
[06:25] <Cosmos42> wols okay so where is this error message supposed to be?
[06:25] <DasEi> mikewatt: still, as said above
[06:25] <mikewatt> what does lm-sensors does?
[06:25] <darolu> debrucool: try with speakers or other headphones set, just to discard the hardware failure possibility
[06:25] <ishu> emet :  have just installed wine on ubuntu
[06:25] <stsm> traeq, because if you just need the VU of the sound there are better ways
[06:25] <traeq> stsm: well, i'll explain what i've got
[06:25] <traeq> perhaps there is a more optimal way of doing everything
[06:25] <DasEi> mikewatt: read the given link..  follow the instructions
[06:25] <xumuk> casemods, run this /etc/init.d/bluetooth status
[06:25] <mikewatt> DasEi: what does lm-sensor does? check temps?
[06:25] <ishu> but i'm unable to run any windows games on it. can u help
[06:26] <stsm> traeq, yeah please explain the idea / goal
[06:26] <traeq> currently, i have two machines, a desktop running windows 7, and a laptop running ubuntu
[06:26] <Cosmos42> wols  so it says i'm not authorized to run the X server, aborting
[06:26] <DasEi> mikewatt: fansppeds, temps and such, mobo-sensors
[06:26] <traeq> they are very closely tied together, with network sharing/synergy etc
[06:26] <casemods> xumuk: where do I "run" that?
[06:26] <ishu> emet : but i'm unable to run any windows games on it. can u help
[06:26] <traeq> currently, i combine the computer's sound using a line in cable from the laptop to the desktoo
[06:26] <mikewatt> That topic said will need to run a script. I don`t know is that safe.
[06:26] <xumuk> copy & paste it into terminal
[06:26] <thom_> hi..  excuse me,, M back again. I was trying Ubuntu Lucy (Lucid Lynx) beta on my computer with live-CD session. But it gimme some errors. I couldn't get to the desktop. The error msgs r "init : ureadahead-other main process (1219) terminated with status 4" What was it? And What I should do? Note : it was running well on virtualbox. (in #ubuntu+1 I didn't get any responses)
[06:26] <traeq> I'd like to add a microphone to this setup, but the windows machine doesn't properly handle both the line-in and the mic
[06:27] <debrucool> darolu- Whats the use of the profiles in Sound preferences. I have "digital surround 4.0" chosen. I have tried others too but they dont make much difference . What are they? can they help me anyhow ?
[06:27] <rocket16> Is there anything like Microsoft Maths in Ubuntu? (I tried CAS like wxMaxima, Sage and MAthomatic)
[06:27] <ishu> hey emet r u there
[06:27] <stsm> traeq, so basically you output your sound from the ubuntu laptop, into the windows machine, which then outputs its own sound + the ubuntu sound?
[06:27] <kalesian> Hi, I've managed to break my DNS client, can anyone give me a bit of help fixing it?
[06:27] <traeq> yeah
[06:28] <stsm> traeq, so doesnt the microphone get outputted from your ubuntu laptop to the windows 7 desktop? :s
[06:28] <traeq> well currently it doesnt, but that's what i'd like
[06:28] <xfact> debrucool, Have fun here, I am leaving
[06:28] <xfact> Bye
[06:28] <mikewatt> DasEi: I installed lm-sensor.
[06:28] <rsk> kalesian undo what you did to break it
[06:28] <xumuk> casemods, have U done it?
[06:28] <kalesian> rsk: I have no idea what broke it.
[06:28] <traeq> right now i'm just using the line-in cable from when i first did this setup while both machines were windows
[06:28] <darolu> debrucool: that can be the cause of your problem, those are audio-modes, digital surround 4.0 means that profile is appropriate for digital speakers, 4 of them two frontal and two rear ones and that it uses surround sound; if you are using regular headphones use "analog headphones" profile, if is not existent try with "2.0 analog"; unless you are using digital channel and digital headphones
[06:28] <bilalakhtar> hello is it possible to run the ubuntuone music store on ubuntu karmic rythmbox? or is it exclusively for lucid?
[06:29] <stsm> traeq, you can change the settings to make the microphone output too, then you can just mute it whenever you dont need it
[06:29] <traeq> hmm, that seems rather logical actually
[06:29] <traeq> i didn't see any setting like that, where is it?
[06:29] <stsm> traeq, this is possible in windows too afaik
[06:29] <mikewatt>  DasEi: should I Run the mkdev.sh script
[06:29] <almoxarife> kalesian: broke it how? what has changed?
[06:29] <xumuk> bilalakhtar, try it up...
[06:29] <stsm> traeq, let me check if i can find it
[06:30] <traeq> well, i have to do something like that to get hte line-in device to play on windows
[06:30] <casemods> xumuk: when attempting to send a picture from my phone, it says "no bluetooth device found" and I've set everything up in ubuntu for the phone
[06:30] <asf1> ircII, use ?
[06:30] <WAawaawEE> i have this on crontab to backup my data... is there a command with tar to encrypt it with maybe AES automatically? -> tar cvzf $HOME/html/_file_backups/$NOWDATE.tar.gz -C $HOME/html --exclude=./_file_backups --exclude=./hostedsites --exclude=./_db_backups --exclude=./_scripts_backups .
[06:30] <bilalakhtar> xumuk: It is a rythmbox plugin that manages the store
[06:30] <traeq> but if i can get the mic to play on ubuntu, and that goes over the line-in cable, that'd be just fine
[06:30] <simp> hi emet
[06:30] <bilalakhtar> xumuk: If there are no version problems, the plugin should compile and work fine in karmic as well.
[06:30] <stsm> traeq, ah, but ideally you want to do this ins windows only?
[06:30] <kalesian> almoxarife: well, firstly, I can't resolve anything, but I can ping IP address, and secondly, my resolv.conf seems to be overwritten with "nameserver 127.0.0.1" by resolv.conf every reboot
[06:31] <DasEi> mikewatt: sudo sensors-detect
[06:31] <darolu> bilalakhtar: I'm not sure ubuntuone music store is already working; you can technically add it to 9.10 by adding Lucid's repos; but I wouldn't recommend it at all, wait a little Lucid comes out on April 29th, if you need to buy music from the store go the actual store's URL (I'll link you in a bit)
[06:31] <Explore2> can anyone pls help me in converting scanned to doc to text file?
[06:31] <traeq> i don't have any actual preference how the problem gets solved
[06:31] <kalesian> almoxarife: if I manually edit resolv.conf, it still doesn't work, and it gets erased next reboot
[06:31] <DasEi> mikewatt: add to /etc/modules    >> yes
[06:31] <stsm> traeq, my mate did this once in windows xp, it was just some simple setting but i dont know it off the top of my head and i'm running linux
[06:31] <traeq> if i understand you correctly, stsm, my windows machine is correctly configured
[06:31] <bilalakhtar> darolu: I can't find the store URL. Could you?
[06:32] <stsm> traeq, but i'm sure someone at #windows can help
[06:32] <darolu> bilalakhtar: http://us.7digital.com/
[06:32] <traeq> it's just the linux bit that isnt
[06:32] <DasEi> mikewatt: when done, load modules found manually : sudo modprobe >modulname<
[06:32] <almoxarife> kalesian: you made conf changed prior to this ?
[06:32] <almoxarife> kalesian: changes
[06:32] <xfact> darolu, I thought it was linked to Amazon MP3
[06:32] <stsm> traeq, what are you doing with it actually? DJing or something? :s
[06:32] <kalesian> actually no, I did install nscd at one point though, but I've uninstalled that since I wondered whether that was causing the problems
[06:32] <traeq> no, i just want voice chat to work properly
[06:33] <bilalakhtar> darolu: This is the url of the 7digital store. I know that 7digital is the music store provider, but the prices in the 7digital store and 7digital ubuntuone store are different
[06:33] <darolu> xfact: all articles I've read about it point to 7digital; one of those articles even had the Ubuntu branding images on 7digital website
[06:33] <almoxarife> kalesian: that might have done it
[06:33] <traeq> let me summarize what i think you've told me, stsm, so that we're both on the same page
[06:33] <bilalakhtar> darolu: The music store has launched www.isthemusicstorereadyyet.com
[06:33] <xumuk> bilalakhtar, sory, I can't help much cuse I don't use it due encoding...
[06:33] <kalesian> almoxarife: well, I uninstalled nscd
[06:33] <darolu> bilalakhtar: awesome
[06:34] <bilalakhtar> xumuk: darolu: Thank you all
[06:34] <bilalakhtar> will attempt to compile the plugin
[06:34] <kalesian> almoxarife: still doesn't work
[06:34] <mikewatt> I will now generate the commands needed to load the required modules.
[06:34] <almoxarife> kalesian: how are connected to the internet?
[06:34] <disappearedng_> Hey my vim suddenly does not have -xterm_clipboard  after an update. how do I recompile ubuntu with that support?
[06:34] <traeq> i have a microphone, which i want to use for voice chat. my windows machine uses line-in to take ubuntu's sound and plays it. but to get voice chat working i dont need to setup any network audio stuff, just make ubuntu play my mic on the line out
[06:34] <stsm> traeq, if you just want voice chat to work on the windows machine, and nothing more, you can just plugin the mic into the windows machine and it should work with default settings even :s
[06:34] <xumuk> casemods, do some other devices "see" your PC?
[06:34] <DasEi> mikewatt: fine
[06:35] <kalesian> almoxarife: the machine's hooked via wired ethernet
[06:35] <casemods> xumuk: I only have the phone
[06:35] <traeq> you say that, but i'd like voice chat to work IN ADDITION to the line-in, and i've spent far too much time trying to do things that way
[06:35] <traeq> the audio hardware is just shit
[06:35] <DasEi> mikewatt: and again, don't pm me
[06:35] <Cosmos42> wols when i try to open nautilus from the terminal i get nathansaccount@ubuntu:~$ nautilus
[06:35] <Cosmos42> (nautilus:2051): Eel-CRITICAL **: eel_preferences_get_boolean: assertion `preferences_is_initialized ()' failed
[06:35] <Cosmos42> ** (nautilus:2051): WARNING **: No marshaller for signature of signal 'UploadFinished'
[06:35] <Cosmos42> ** (nautilus:2051): WARNING **: No marshaller for signature of signal 'DownloadFinished'
[06:35] <Cosmos42> ** (nautilus:2051): WARNING **: No marshaller for signature of signal 'ShareCreateError'
[06:35] <FloodBot4> Cosmos42: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[06:35] <Cosmos42> Initializing nautilus-gdu extension
[06:35] <xumuk> First time in Ubuntu?
[06:35] <stsm> traeq, voice chat in addition to line in? that does not make sense dude sorry
[06:35] <xumuk> casemods, First time in Ubuntu?
[06:35] <bullgard> What program produces the (warm orange) background picture?
[06:35] <traeq> sure it does
[06:35] <casemods> yes uxu
[06:35] <almoxarife> kalesian: right click on the eth icon and tell me what is listed as dns
[06:35] <casemods> xumuk:
[06:36] <rocket16> Cosmos42: Try gksudo nautilus
[06:36] <kalesian> almoxarife: ah, I'm in console, hang on, lemme start up X.
[06:36] <xumuk> bullgard, it's not programm... it's just an image...
[06:36] <mikewatt> To load everything that is needed, add this to /etc/modules:
[06:36] <simp> hi eaglewatch
[06:36] <mikewatt> #----cut here----
[06:36] <mikewatt> # Chip drivers
[06:36] <mikewatt> coretemp
[06:36] <mikewatt> #----cut here----
[06:36] <FloodBot4> mikewatt: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[06:36] <DasEi> bullgard: it's  just a png, can set any fitting in resolution , like http://tinyurl.com/yhmqlwk
[06:36] <traeq> on windows, i have line in, from the ubuntu computer. with that already working, i want a microphone
[06:36] <mikewatt> To load everything that is needed, add this to /etc/modules:
[06:37] <mikewatt> #----cut here----
[06:37] <mikewatt> # Chip drivers
[06:37] <mikewatt> coretemp
[06:37] <mikewatt> #----cut here----
[06:37] <FloodBot4> mikewatt: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[06:37] <[biabia]> is 9.10 the most current version
[06:37] <xumuk> casemods, do U know how to start terminal?
[06:37] <Cosmos42> my bad
[06:37] <DasEi> !paste | mikewatt
[06:37] <bullgard> xumuk DasEi: But it needs a program to create it on screen.
[06:37] <mikewatt> cut here how to?
[06:37] <simp> hi wet
[06:37] <Cosmos42> wols here is the paste bin http://paste.ubuntu.com/399717/
[06:37] <casemods> no i dont xumuk
[06:37] <iceroot> [biabia]: yes
[06:37] <traeq> stsm: i had thought that considering that the windows machine apparently won't cooperate with the most logical way of doing that, i could get ubuntu to help by sending it over network
[06:37] <[biabia]> iceroot thanks
[06:37] <stsm> yeah you just need to output the sound of the mic to your speakers in realtime then traeq, i didnt find the setting but i'm fairly sure its there
[06:37] <xumuk> bullgard, bullshit...
[06:37] <rocket16> How can we use Visualisation in EXaile Music Player?
[06:37] <mikewatt> EdaEi: cut here?
[06:38] <traeq> stsm: yeah, okay. what am i looking for exactly?
[06:38] <DasEi> bullgard: the desktop-background needs just a picture, pre-generated elsewhere
[06:38] <Lanlost_> uh, I just saw on a "how to set up internet connection sharing" that you ... ... can NOT do it with a cross over cable? whats up with that?
[06:38] <stsm> traeq, but this is really overkill, its not needed, your windows machine alsone will do fine (or your ubuntu machine alone)
[06:38] <mikewatt>  # Chip drivers
[06:38] <stsm> traeq, so if you want my advice i would just solve it with one computer
[06:38] <bullgard> xumuk DasEi: What is the name that paints this picture on screen?
[06:38] <wols> Cosmos42: line 11. your nautilus crashes. why I cannot say. could be many things. I suggest creating a new user and try it with that user. if it works, it's your gnome config that is broken
[06:38] <mikewatt> what`s that means?
[06:38] <Lanlost_> I'm connecting from my PC to my xbox which needs a crossover cable.. or at least, I assumed. I know it didn't work in Windows XP ICS without it. It works fine in Windows and Vista but I can't get it to work in linux
[06:38] <stsm> its a bit silly of using 2 computers for something simple like voice chatting
[06:38] <rocket16> How can we use Visualisation in EXaile Music Player?
[06:38] <stsm> (not meant insulting or anything)
[06:39] <xumuk> appllications>accesories>Termainal
[06:39] <Lanlost_> I used to use firestarter (with my laptop) to share to a friends computer and it was simple, but I can't get it to work here for some reason. I know the settings it should be.
[06:39] <traeq> well, fine. you're given my hardware, and my objectives
[06:39] <traeq> how would you configure EVERYTHING from the ground up?
[06:39] <Lanlost_> it just never seems to work with karmic..
[06:39] <simp> os2mac : hi
[06:39] <bullgard> DasEi: What is the name of the program that paints this picture on screen?
[06:39] <stsm> traeq, your only objective is to voice chat?
[06:39] <DasEi> bullgard: look yourself, left click on dektop.. warmorange.jpg ?? just a guess..
[06:39] <traeq> no.
[06:40] <traeq> I have a laptop that occasionally plays TV sound, that uses a seperate cable. I have a desktop computer with speakers, that the laptop is to otherwise use.
[06:40] <xumuk> casemods, appllications>accesories>Termainal
[06:40] <stsm> traeq, i'm sorry but then the problem is stilll not clear to me :(
[06:40] <mikewatt> sudo modprobe >modulname< what`s the modulname?
[06:40] <xumuk> casemods, appllications>accesories>Terminal
[06:40] <DasEi> mikewatt: sensors-detect should have offered you to insert to /etc/modules ..
[06:40] <traeq> I have a microphone that I want to be able to use on the desktop computer
[06:40] <mikewatt> yes I hit y
[06:40] <bullgard> DasEi: I am not interested in the name of the background picture file but in the name of the program that creates this background picture.
[06:40] <Logicwax> got a question:  i have fake that ubuntu does great at mounting at /dev/mapper/sil_nfjafrfqqq.   if i format it directly, without a partition table (mkfs.ext4) it works great.   my problem is when i put a partition table on it, it'll only mount after reboot if i do "sudo partprobe"
[06:40] <os2mac> Hello simp
[06:40] <Cosmos42> wols how would i fix my gnome config?
[06:40] <Logicwax> why do i need to do this at every reboot?
[06:41] <stsm> traeq, so just plugin the microphone, its the only audio source on the desktop afaik
[06:41] <Logicwax> fake = fakeraid
[06:41] <mikewatt> DasEi: how to insert the module nam?
[06:41] <traeq> how will the laptop play on the desktop's speakers?
[06:41] <DasEi> bullgard: gimp maybe ? can be any paint-prog
[06:41] <simp> os2man : i have just installed wine but not able to run any windows games on it!!! can u help
[06:41] <Kian> os2man : i have just installed wine but not able to run any windows games on it!!! can u help
[06:41] <stsm> Logicwax, you can also use software raid
[06:41] <Kian> Logicwax, you can also use software raid
[06:41] <FloodBot4> Kian: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[06:41] <Kian> Kian: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[06:41] <bilalakhtar> Sorry, people, I wasn't successful in getting the plugin to activate in rythmbox
[06:42] <bullgard> DasEi: Your answer is wrong.
[06:42] <bilalakhtar> i mean the music store plugin
[06:42] <Logicwax> stsm, Kian: i know...but too late for that.  i already formated it with a partition table
[06:42] <Kian> stsm, Kian: i know...but too late for that.  i already formated it with a partition table
[06:42] <bilalakhtar> The music store will work ONLY on lucid
[06:42] <Kian> The music store will work ONLY on lucid
[06:42] <wols> Cosmos42: I don't know cause I dunno in what way it is broken
[06:42] <rocket16> What is Software Raid?
[06:42] <os2mac> why is everyone repeating.
[06:42] <Kian> why is everyone repeating.
[06:42] <Logicwax> im just wondering why i need to do "sudo partprobe" after every reboot for ubuntu to see that main partition
[06:42] <Kian> im just wondering why i need to do "sudo partprobe" after every reboot for ubuntu to see that main partition
[06:42] <FloodBot4> Kian: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[06:42] <Gartral> cause the spammobot
[06:42] <Kian> Kian: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[06:42] <Kian> cause the spammobot
[06:43] <DasEi> !ops | kian
[06:43] <xumuk> chmod it))
[06:43] <asdf1> virus for ubuntu ?
[06:43] <xumuk> asdf1, no)
[06:43] <rocket16> asdf1: Virus for Ubuntu? Is there any?
[06:43] <asdf1> ok
[06:43] <jussi01> asdf1: nah, just someone trying to disrupt
[06:43] <stsm> traeq, ok you want to voicechat on the desktop, and next to that you want the laptop to use the same speakers as the desktop, is that what you want to do?
[06:43] <jussi01> !virus
[06:43] <Gartral> put kian on the perma ban list
[06:43] <traeq> stsm: yes. that's exactly it
[06:43] <xumuk> virus
[06:44] <os2mac> was someone trying to ask me a question?
[06:44] <xumuk> viruses...
[06:44] <shavei> How to set up "virtual hosts" in ubuntu?
[06:44] <asdf1> ok
[06:44] <simp> i was
[06:44] <rocket16> !virus | asdf1
[06:44] <mikewatt> Intel Core family thermal sensor...                         Success!
[06:44] <mikewatt>     (driver `coretemp')
[06:44] <xumuk> get th ***** out of here))
[06:44] <Cosmos42> wols so if a new account works, what should i do about my account?  just recreate it?
[06:44] <DasEi> mikewatt: 3rd time, no pm's please;; you got some modules which you now have to load manually, as told above
[06:44] <stsm> traeq, yes then it might be the best to just output what ever comes in from your mic (on the ubuntu laptop)
[06:44] <os2mac> what's your question Simp?
[06:44] <Logicwax> im thinking that maybe i need to recompile my initrd because it loads mods out of order?  since it might load the modules for the fakeraid AFTER it probes for partitions?
[06:44] <traeq> okay. and as you said previously, you don't know which setting does this?
[06:44] <simp> os2mac: i have just installed wine but not able to run any windows games on it!!! can u help
[06:44] <casemods> does anyone know of a GIMP irc channel?
[06:44] <wols> Cosmos42: you just created a new account...  you could also delete .gnome in your old one for example
[06:45] <rocket16> Oh no! Nobody is answering my askings! Can anybody listen to me? If so, please reply once (I am afraid this is a connection problem)
[06:45] <wols> casemods: /msg alis list gimp*
[06:45] <stsm> traeq, i'm gonna go for a smoke and a new cup of coffee, if you didn't find the setting then i'll try to find it
[06:45] <os2mac> simp: not much of a wine expert sorry.
[06:45] <DasEi> rocket16: got sw-raid answered already ?
[06:45] <chandru_in> When trying to install Lucid Beta-1 in virtual box using the "Install Ubuntu 10.04" option directly, the installer freezes after retrieving time from server.  Is this a known bug or should I file one?  I tried searching on Launchpad but couldn't find one!
[06:45] <mikewatt> DasEi: Sorry for that. bUT  how to load them?
[06:45] <traeq> stsm: okay, i'll keep you posted
[06:45] <chandru_in> I've tried upgrading the installer to no avail
[06:45] <stsm> traeq, but now your question is much more simple: "how can i output whatever comes in trough my microphone"
[06:45] <xumuk> simp, not all the games are able to run by wine
[06:45] <rocket16> DasEi: Yes, I tried to google it. Thanks, :)
[06:45] <os2mac> chandru_in: you should probably ask that in #unbuntu+1
[06:45] <DasEi> mikewatt: see above, please
[06:45] <darolu> shavei: files at "/etc/apache2/sites-available<and enable>/" should let you do it
[06:45] <stsm> traeq, ok brb, good luck
[06:46] <lonejack> Hi, I downloaded netbeans and would like to run it with jdk instead jre, so, set its config file to the jre. Now works. Problem my link is dependent to the jdk (java-6-sun-1.6.0.15). Is i possible to pun instead a link to the last jdk installed? Thank you...
[06:46] <bullgard> chandru_in: Please aks in #ubuntu+1.
[06:46] <Cosmos42> wols okay lemme figure this out
[06:46] <DasEi> rocket16: you know what raid itself does, like striping or mirroring ?
[06:46] <chandru_in> os2mac: Didn't know about that channel thanks
[06:46] <rocket16> DasEi: Yes, reading the guide on it, :)
[06:46] <mikewatt> DasEi: i want to know why it shows i only got 4 frequencies to change but T2370 have 6 steps.
[06:46] <Lanlost_> http://www.webupd8.org/2009/02/ubuntu-internet-connection-sharing.html
[06:46] <Lanlost_> is that not really enough?
[06:47] <os2mac> chandru_in: your welcome
[06:47] <DasEi> rocket16: the common way was to have a hardware-controller for it, linux brings a software to emulate those chips, works very good (though a dedicated high-class controller can't be beaten)
[06:47] <Logicwax> yeah dmraid
[06:48] <Logicwax> but does anyone know why I need to do "partprobe" after a reboot for it to read the partition table?
[06:48] <mikewatt> http://ark.intel.com/Product.aspx?id=34445
[06:48] <xumuk> lonejack, sudo apt-get remove jre | sudo aptitude purge jre | sudo apt-get update | upgrade
[06:48] <DasEi> rocket16: this emulation is called software-raid
[06:48] <phiberoptik> how do i change the display manager in ubuntu
[06:48] <phiberoptik> wanna switch from kdm to gdm
[06:48] <wols> phiberoptik: install another one
[06:49] <wols> phiberoptik: apt-get install kdm
[06:49] <simp> os2mac : i have installed ubuntu 9.10 on my pc . I had earlier ubuntu 9.04 . But  windows boot manager lists 2 ubuntu (s) . how can i remove older one from boot manager
[06:49] <xumuk> wols, from!! kdm to!! gdm)
[06:49] <wols> Logicwax: you can use a crossover cable just fine
[06:50] <wols> doh
[06:50] <phiberoptik> i'll try that
[06:50] <phiberoptik> thx
[06:50] <abhinav> simp: apt-get remove linux-image-<tab> will show you all the ones that are installed.
[06:50] <munim> Guys.. one small question... i just want to know the location of the downloaded package files so I can I can copy it in another computer and install without redownloading
[06:50] <wols> Lanlost_: you can use a crossover cable without a problem. and the howto you linked looks good enough
[06:50] <Logicwax> heh
[06:50] <lonejack> xumuk, thnak you
[06:50] <Lanlost_> it doesn't work
[06:50] <Lanlost_> I don't get it.
[06:50] <abhinav> simp: just remove all but the current one. Check for the current one using "uname -a"
[06:50] <wols> munim: /var/cache/apt/archives/
[06:50] <simp> abhinav : i'm trying it
[06:50] <abhinav> simp: be careful :)
[06:50] <xumuk> lonejack, U're welcome) feel free to ask)
[06:51] <DasEi> munim: /var/cache/apt/archives/
[06:51] <Lanlost_> All I do in windows is turn on connection sharing and set my xbox to use an ip of 192.168.0.whatever, netmask 255.255.255.0, gateway 192.168.0.1 and dns of 192.168.0.1 (I use 4.2.2.2)
[06:51]  * abhinav says hi to abhi_nav - welcome to another day of confusion
[06:51] <munim> DasEi, exactly what I was looking for.. thanks!
[06:51] <Lanlost_> I've had this working in ubuntu like 4 versions ago and I had the same set up
[06:51] <abhi_nav> Hi! anyone here uses iomega external usb hdd?
[06:51] <munim> wols, thanks!
[06:51] <abhi_nav> hi abhinav!!!!!!! ;)
[06:51] <Lanlost_> i just did ifconfig eth0 192.168.0.1 netmask 255.255.255.0 and then set the xbox to 192.168.0.127, gateway 192.168.0.1 and dns 4.2.2.2 (netmask 255.255.255.0)(
[06:52] <Lanlost_> I feel like there is something broken here
[06:52] <Losha> wols: the web page says *not* to use a crossover cable. They can't *both* be right, can they?
[06:52] <Lanlost_> thats what I'm saying
[06:52] <SmokeyD> hey everyone. I have a very strange problem. When I plug-in a usb printer (not supported by ubuntu) ubuntu starts searching for a driver, but when I do 'lsusb', the printer is not listed.
[06:52] <Lanlost_> I'm using a crossover cable..
[06:52] <os2mac> simp is it your windows boot manager or grub?
[06:52] <SmokeyD> any clues why it isn't listed with lsusb?
[06:52] <Lanlost_> I haven't been able to get this ICS working in ubuntu for probably 2 years now
[06:52] <Lanlost_> so I feel like.. maybe thats been the problem all along
[06:52] <simp> it is windows boot manager
[06:52] <wols> Lanlost_: ok, the XBox needs a DHCP server. you have dnsmasq installed so edit /etc/dnsmasq.conf to enable its dhcp server. then the xbox should acquire a ip and work
[06:52] <Lanlost_> let me go find a non crossover..
[06:52] <Lanlost_> the xbox doesn't need dhcp..
[06:52] <os2mac> then again I have no Idea... I am a mac user and a linux user.
[06:53] <Lanlost_> This is an original modded xbox with xbmc
[06:53] <roccity_> SmokeyD, does it finish searching for the printer before you try lsusb?
[06:53] <Lanlost_> it's not the xbox here thats not working
[06:53] <wols> the crossover cable works nowadays since NICs are autosensind
[06:53] <wols> *autosensing
[06:53] <Lanlost_> wait, I GOT the crossover because it didn't work without it
[06:53] <xumuk> simp, have U alterated partitions recently?
[06:53] <abhinav> Losha, Lanlost_ : I think most of the new eth cards detect whether you're using straight or crossover, and adapt to it internally.
[06:53] <wols> Lanlost_: can you set the xbox to a static IP?
[06:53] <stsm> traeq, so did you find it?
[06:53] <roccity_> SmokeyD, is there another driver in another format like rpm?
[06:53] <Lanlost_> wols, yeah
[06:53] <wols> Lanlost_: can the xbox ping your ubuntu?
[06:53] <SmokeyD> roccity_: I was given a screen to select the driver, where I hit cancel, then I do lsusb (I want to use the printer in VBOX, which used to work)
[06:53] <simp> xumuk : yeah
[06:53] <Lanlost_> I'm set to static 192.168.0.127, gateway 192.168.0.1, netmask 255.255.255.0, dns: 4.2.2.2
[06:54] <Losha> wols: Lanlost_: I thought it was the other way round. Before autosensing, you needed a crossover cable to connect to nics back-to-back?
[06:54] <DasEi> mikewatt: I'm getting tired repeating myself, to get a working sensors applet I gave you all information, powernowd supports your cpu and I can't answer about how many steps an for me unknown cpu is to be triggered by linux, these are relativly easy tasks and I suggest you look in ubuntuforums, it's all there
[06:54] <wols> Losha: yes
[06:54] <reber> hi all. Does anyone know a tool to make house plans ?
[06:54] <Lanlost_> Losha, I got the crossover because someone said the xbox couldn't auto sense
[06:54] <roccity_> SmokeyD, this same printer worked in VBox?
[06:54] <Lanlost_> the 360 does, but not the original xbox
[06:54] <Lanlost_> but.. it shouldn't matter then since my pc does auto sensing right?
[06:54] <abhi_nav> reber: google sket
[06:54] <xumuk> simp, so U just have to reinstall the GRUB...
[06:54] <abhinav> reber: google sketch ?
[06:54] <wols> Lanlost_: can you ping your ubuntu box from xbox?
[06:54] <Lanlost_> as long as one of the computers?
[06:54] <SmokeyD> roccity_: yes. It worked before. I just seems now that the printer is locked by some process or something since it's not visible with lsusb
[06:54] <abhi_nav> haa haa haa :D ;)
[06:54] <Losha> Lanlost_: unless it doesn't....
[06:54] <Lanlost_> no, but I can ping the xbox
[06:55] <Lanlost_> It doesn't mean I _CANT_ ping the pc from the xbox, I just have no way to
[06:55] <Lanlost_> heh
[06:55] <ranjan> anyone using gloobus preview??
[06:55] <Lanlost_> I CAN ping the xbox from the pc though
[06:55] <wols> Lanlost_: then install ipmasq and you are done. to test, on what ports does your ubuntu listen?
[06:55] <bullgard> What program produces the warm orange Ubuntu background picture on screen? Is it Nautilus or not?
[06:55] <roccity_> SmokeyD, what is the brand and model of the printer
[06:55] <Lanlost_> 64 bytes from 192.168.0.127: icmp_seq=2 ttl=64 time=0.068 ms
[06:55] <Lanlost_> to test, on what ports does your ubuntu listen?
[06:55] <Lanlost_> uh..
[06:55] <Lanlost_> I never set up anything with ports
[06:55] <xumuk> simp, do u know the way to do it?
[06:55] <Losha> Lanlost_: if you can ping at all, your cable is working...
[06:56] <reber> abhi_nav, is this tool available for linux ?
[06:56] <Lanlost_> d'oh
[06:56] <abhi_nav> bullgard: its wallpaper
[06:56] <abhi_nav> reber: most probably.
[06:56] <Lanlost_> Losha, d'oh
[06:56] <wols> Lanlost_: sudo netstat -anp |grep LIST
[06:56] <roccity_> SmokeyD, sorry for all the questions but does the VBox have guest additions installed
[06:56] <abhinav> bullgard: it is the wallpaper. not by nautilus
[06:56] <Lanlost_> I knew the cable worked, I just transferred stuff.. It wasn't until I read the crossover cable thing after that that I blanked out about that heh
[06:56] <wols> Lanlost_: it seems your ubuntu drops ping packets so we need another way to test connection
[06:56] <simp> xmuk: no , i have windows boot manager & i dont wish to remove it
[06:56] <Lanlost_> wols, no no.. I'm saying I have no way to ping the pc from the xbox
[06:56] <wols> Lanlost_: pastebin  sudo iptables -t nat -L
[06:56] <Lanlost_> I'm using xbox media center on it as the dashboard, theres no terminal or anything
[06:57] <SmokeyD> roccity_: does that matter? THe problem is just that the printer is not listed with lsusb in the ubuntu host OS. It should be available there before it is available to VBox. But it is a Dell color 725. And yes, guest additions have been installed and the usb system works
[06:57] <Lanlost_> I could get to one but Id have to reinstall stuff for it
[06:57] <Lanlost_> wols, ok, one sec
[06:57] <b146> help
[06:57] <roccity_> SmokeyD, oh ok
[06:57] <b146> exit
[06:57] <SmokeyD> roccity_: I am wondering if there just is a process on my host os that locks the usb device or something
[06:57] <ranjan> anyone using gloobus preview??
[06:58] <bullgard> abhinav: Your answer is wrong. '~$ which wallpaper' does not produce any output.
[06:58] <abhi_nav> ranjan: what is it?
[06:58] <wols> SmokeyD: if lsusb doesn't show the device, it'S not there. no process can use what's not there
[06:58] <Lanlost_> here are both
[06:58] <Lanlost_> http://www.pastebin.org/120824
[06:58] <wols> !anyone
[06:58] <SmokeyD> wols: it is there, because when I plug it in, ubuntu starts looking for a printer driver
[06:58] <abhi_nav> bullgard: it does not give any output here too
[06:58] <ranjan> abhi_nav, its a utility that helps in previewing files ...its very cool to see
[06:58] <SmokeyD> wols: but it isn't listed with lsusb
[06:58] <Lanlost_> I don't think it will matter, the iptables that it has two masquerades.. that tutorial said to do
[06:58] <abhinav> bullgard: it is "executed" by the desktop manager. Not nautilus. That's what I meant.
[06:58] <wols> SmokeyD: then lsusb will show it.
[06:58] <SmokeyD> wols: it doesn't
[06:59] <abhi_nav> rajan: there is setting in ubuntu for this naa?
[06:59] <Lanlost_> paste sudo iptables -A POSTROUTING -t nat -j MASQUERADE into /etc/rc.local to make it do it every time on start up
[06:59] <ranjan> abhi_nav, http://www.youtube.com/watch?v=B1gHk7WMQ34
[06:59] <simp> xumuk : i have installed mandriva 2010 few weeks ago but removed it because i was unable to connect to internet as it asked for some packages and said i dont have it.
[06:59] <Lanlost_> well I accidently hit enter instead of >> to rc.local
[06:59] <wols> Lanlost_: this one is wrong. all you need is to install ipmasq
[06:59] <Lanlost_> so it's in there twice, im 99% I tested this with it in there once
[06:59] <simp> xumuk : can u help?
[06:59] <roccity_> SmokeyD, what are you running in terms of distro
[06:59] <Lanlost_> wait, this one is wrong? it DID say to install ipmas
[06:59] <Lanlost_> q
[06:59] <SmokeyD> roccity_: Ubuntu Karmic
[06:59] <Lanlost_> I didn't do it because theres no apt package for it
[07:00] <Lanlost_> and then I saw on google that it's not needed since "2000" for this
[07:00] <Lanlost_> Package ipmasq is not available, but is referred to by another package.
[07:00] <Lanlost_> let me try to find it manually
[07:00] <wols> Lanlost_: you can't :( it got removed from debian recently and from ubuntu as well I guess
[07:00] <rocket16> m
[07:00] <simp> os2mac : i'm planning to install mac os x leopard . can u tell me the iso image size
[07:00] <DasEi> Lanost, wols . dnsmasq ?
[07:01] <wols> DasEi: ipmasq
[07:01] <DasEi> Lanlost_: ^
[07:01] <Lanlost_> http://packages.debian.org/etch-m68k/all/ipmasq/download
[07:01] <Lanlost_> its there for m68k..
[07:01] <Lanlost_> I need it for x86 but I'm just saying
[07:01] <Lanlost_> er
[07:01] <Lanlost_> etch .. heh
[07:01] <wols> ipmasq is a arch indenepdent package. debian lenny still has it
[07:01] <wols> get it from lenny if you must
[07:01] <Lanlost_> forget I said that ;-)
[07:02] <Lanlost_> yeah, I just realized that
[07:02] <xumuk> simp let's try)
[07:02] <wols> ipmasq is a bunch of shellscripts calling ipmasq, nothing more
[07:02] <roccity_> SmokeyD, have you done any updates?
[07:02] <SmokeyD> wols, roccity_: I see. When I do sudo lsusb it is there.
[07:02] <abhi_nav> rajan: hmm. it is in 9.10 i think
[07:02] <SmokeyD> it isn't there when I run lsusb as normal user, but it is when I run it as root
[07:02] <wols> calling iptables...
[07:02] <Lanlost_> ok ipmasq installed
[07:02] <roccity_> SmokeyD, ok so you need to change the permissions
[07:02] <SmokeyD> roccity_: using udev rules or something?
[07:02] <DasEi> Lanlost_: I haven't followed you initial question, is this for ics ?
[07:02] <os2mac> any ops in ?
[07:03] <simp> xumuk : can u give me the address to download GRUB?
[07:03] <Lanlost_> er
[07:03] <Lanlost_> Should PPP connections recompute the firewall?
[07:03] <phiberoptik> damn kdm with kde 4.40 totally messed up my login windows
[07:03] <phiberoptik> etc.
[07:03] <Lanlost_> (dpkg-reconfigure for ipmasq)
[07:03] <wols> Lanlost_: do you have ppp for internet? ie pppoe?
[07:04] <Lanlost_> no, I'm connected to a router
[07:04] <Lanlost_> heh
[07:04] <xumuk> simp, are u under ubuntu?
[07:04] <Lanlost_> from router -> pc, then crossover to xbox because I can't have a cable runnning that long
[07:04] <roccity_> SmokeyD, are you using cups for it?
[07:05] <simp> xumuk, yeah i'm under ubuntu9.10
[07:05] <pamela> Bazhang?
[07:05] <pojie> yeah....
[07:05] <xumuk> simp, icq or skype?
[07:05] <roccity_> SmokeyD, I found this http://ubuntuforums.org/archive/index.php/t-30262.html
[07:05] <SmokeyD> roccity_ I don't want to use CUPS for it in this case since there is no driver for the printer. I want to pass control of the usb device straight to vbox, where I have windows running for the rare occasion I need it, and in there I have a driver for the printer
[07:06] <pojie> i try 2 find skype
[07:06] <simp> xumuk, XChat
[07:06] <mneptok> Lanlost_: ipmasq is for ipchains. Ubuntu uses iptables. it understands masquerading out of the box. - http://tldp.org/HOWTO/html_single/Masquerading-Simple-HOWTO/
[07:06] <DasEi> !skype | pojie
[07:06] <wols> mneptok: not true
[07:07] <pojie> x chat also ok...
[07:07] <roccity_> Is it possible to make a ubuntu remix from Virtualbox?
[07:07] <wols> mneptok: ipmasq uses iptables for >5 years now
[07:07] <mneptok> wols: you can set easy iptables rules to allow masquerading.
[07:07] <simp> xumuk : which os r u currently using?
[07:07] <DasEi> Lanlost_: again, is this for ics ?
[07:07] <xumuk> simp, same as u
[07:08] <simp> xumuk : do  u have any windows os>?
[07:08] <xumuk> yeah... the 7
[07:09] <traeq> Well, that's interesting.
[07:09] <Lanlost_> dasei, yes
[07:10] <traeq> stsm: it turns out that I have a bigger problem than I thought
[07:10] <Lanlost_> sorry, I didnt see you before
[07:10] <traeq> stsm: thanks for your advice and everything. if i hadn't looked where i looked, i don't think i would have ever found this out
[07:10] <Lanlost_> to ipmasq isn't useful at all for ics in ubuntu? just iptables? (mnptok)
[07:10] <Lanlost_> mneptok i mean
[07:10] <traeq> i don't think the microphone i was planning on using even works, now
[07:10] <DasEi> Lanlost_: you can use dnsmasq very good for it
[07:10] <Lanlost_> I have dnsmasq
[07:10] <stsm> traeq, thats kindof essential :p
[07:10] <traeq> yes, i agree. :)
[07:11] <traeq> the weird thing is, that my laptop has a built in mic
[07:11] <xumuk> simp, yeah... the 7
[07:11] <simp> xumuk : i have tried to download mp3 songs but in ubuntu ,istead of downloading it starts playing it in movie player. Can i help?
[07:11] <traeq> i assumed that when i could record successfully, it was going through the headset by default
[07:11] <Lanlost_> iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE; echo 1 > /proc/sys/net/ipv4/ip_forward; echo net.ipv4.ip_forward = 1 >> /etc/sysctl.conf; /etc/init.d/dnsmasq restart
[07:11] <stsm> traeq, check if it has a volume control in the cable, if its really broken, you could use a mp3 player or something similar, with a audio cable
[07:11] <Lanlost_> shouldn't that be it?
[07:11] <simp> xumuk : i meant can u help?
[07:11] <stsm> traeq, for testing i mean of course
[07:11] <traeq> it does have a volume control, but i've already set it as high as it goes
[07:12] <Lanlost_> does it matter if I do iptables -t nas -A POSTROUTING -o eth0 -j MASQUERADE 50 times in a row? As in repeat entries, will it screw it up?
[07:12] <stsm> traeq, no you can also record without something plugged in
[07:12] <DasEi> Lanlost_: http://tinyurl.com/2g2dh8
[07:12] <xumuk> simp, which way did u download it? by some program or browser?
[07:12] <stsm> traeq, but since its a laptop it might also have a builtin mic
[07:12] <traeq> what do you mean record without something plugged in?
[07:12] <traeq> wouldn't i just get.. nothing?
[07:12] <traeq> no devices => no recording
[07:12] <simp> xumuk, i simply download it from firefox
[07:12] <traeq> if i record, it must be the case that there is a device
[07:13] <DasEi> Lanlost_: why would you repeat it ?
[07:14] <simp> os2mac : r u there?
[07:15] <Lanlost_> ... because I accidently did already
[07:15] <Lanlost_> if you look at my paste bin you will see
[07:15] <xumuk> simp, and? what do u want to do whit it?
[07:15] <Lanlost_> #
[07:15] <Lanlost_> MASQUERADE  all  --  anywhere             anywhere
[07:15] <Lanlost_> #
[07:15] <Lanlost_> MASQUERADE  all  --  anywhere             anywhere
[07:15] <Lanlost_> ack, sorry, I meant to paste the pastebin
[07:15] <Lanlost_> http://www.pastebin.org/120824
[07:15] <simp> xumuk, just enjoy!
[07:15] <Lanlost_> anyway, that link you gave me is exactly the same instructions as the one I used
[07:15] <Lanlost_> except.. the one you gave me.. seems to repeat the process twice for some reason
[07:16] <xumuk> simp, o_O can't u open it or what?
[07:17] <karma> i am trying to install mint and am in the partitioning part of the install.. when i try to move foward i get message: No root file system is defined
[07:17] <Slart> !mintsupport | karma
[07:17] <simp> xumuk - i'm able to open it , it  runs for 1 time and did not download it
[07:18] <Lanlost_> I don't even understand what could possibly be wrong at this point
[07:18] <simp> xumuk - i want mp3 file ... which i'm not getting
[07:18] <Lanlost_> these are the exact same results I've got after 2 years of it not working.. I swear I did these exact same commands before and it worked
[07:18] <Lanlost_> and then I used firestarter after that and it worked
[07:18] <Lanlost_> neither will work in newer ubuntus for me
[07:18] <simp> xumuk : do u have compiz??
[07:19] <Lanlost_> I know this sounds ridiculous, but is it possible I can ftp and such to my xbox but for ICS it won't work with crossover cable? I know that is ridiculous I just can't see why they would even mention it
[07:19] <xumuk> simp, what do u choose save or open? yes, I have.
[07:19] <karma> i am new to ubuntu partitioner.. i am trying to install and get error: No root file system is defined.. I am dual booting with win 7 installed first
[07:20] <nibbler> karma: you have not defined any partition to be mounted to "/" - your root file system
[07:20] <Slart> karma: clever =) are you using the simplified partitioner? or the manual "do it all yourself" partitioner?
[07:21] <karma> i am running a live usb and am at the initial "prepare partitions" form.. I'm assuming its the simplified since it has a gui
[07:22] <ofMortalsAndMen_> so....
[07:22] <ofMortalsAndMen_> how do i get the list of all the channels?
[07:22] <abhi_nav>  type /list
[07:22] <DasEi> ofMortalsAndMen . /list
[07:22] <holmser> anyone here messed with zoneminder before?
[07:22] <Slart> karma: nah.. not the installer.. both installers have.. at least two options for partitioning the hard drive space.. one is "use the entire drive" autopartitioning.. and then there's the manual one
[07:22] <abhi_nav> then lotssssssssssss ooooooof chennel loads which take lots of time you have to wait for them to load
[07:23] <karma> i am trying to install it on free space... its the manual one then.. i had to chose it because i am dualbooting
[07:23] <Lanlost_> *sigh*
[07:23] <Lanlost_> I can't get the damn "wired network: connection established" gnome thing to go away
[07:23] <Slart> karma: ah.. then you have to tell it where to put the root drive.. ie make a partition and tell it to use it as root
[07:23] <Lanlost_> it just sits up there and when I put my mouse there it dissapears but then it comes back and theres no way to get it to leave
[07:24] <Lanlost_> its been there for about 20 minutes now
[07:24] <karma> set it up as swap or ext4?
[07:24] <Lanlost_> and its on top too..
[07:24] <Slart> karma: ext4 will be fine
[07:25] <simp> xumuk : r u there
[07:25] <karma> do i need to creat a swap? or does the install do so automatically?
[07:25] <ofMortalsAndMen> quit i am confused
[07:25] <Slart> karma: the install doesn't create a swap.. you can do it yourself.. either as a partition or as a regular file.. it isn't really necessary if you've got enough memory
[07:25] <abhi_nav> Lanlost_ http://ubuntuforums.org/showthread.php?t=1034835
[07:26] <karma> i have 4gb memory so i think i am safe
[07:26] <abhi_nav> ofMortalsAndMen first type /list here and then you start getting result in "freenode" tab
[07:26] <simp> abhinav : r u there
[07:26] <Slart> karma: yup.. shouldn't be a problem
[07:27] <simp> ?
[07:27] <simp> ?
[07:27] <xumuk> simp, yep
[07:27] <karma> sorry for my noobness... do i set it up as primary or logical? and what do i set for the mount point
[07:28] <Slart> karma: for the root drive? primary should be fine (you can only have 4 of those per drive).. mount point should be "/" or root
[07:28] <simp> xumuk-do u have installed ubuntu inside windows or independently?
[07:29] <xumuk> simp, eat my balls
[07:29] <DasEi> Slart: on a dualboot 1) win 2) swap 3) root .. better extended, case a later crypt or seperate home is needed
[07:29] <Slart> !language | xumuk
[07:29] <karma> whats an ideal swap size? what does it default if installed automatically?
[07:30] <Lanlost_> dude.. come on wired network
[07:30] <Lanlost_> that link didn't work, theres no system -> preferences -> sessions in Mint. I'll figure it out though
[07:30] <simp> xumuk - well do u know that u r going to be killed????????????????????????????????????????????????
[07:30] <Slart> karma: depends.. are you going to use hibernation? then you need as much swap as memory.. at least.. if it's just for a regular system.. go with 1-2GB or so
[07:30] <DasEi> simp: are you trolling ?
[07:30] <Slart> !ops | simp, xumuk
[07:31] <karma> ty
[07:31] <eri_> hi
[07:31] <nibbler> karma: ideal swap size is depended on your haves and needs, rules like "twice the ram" are based on nothing... make 1gig :p
[07:31] <Slart> DasEi: good point.. karma, did you see what Dasei said a couple of lines up? perhaps extended/logical partitions might be better.. gives you a bit of breathing room if you want to add more stuff later
[07:31] <Lanlost_> pkill notify-osd
[07:31] <Lanlost_> ack it's back up
[07:31] <eri_> i need help with a wifi conection
[07:32] <cforlife> abhinav - r u there??
[07:32] <Lanlost_> there we go. chmodded it and then killed it
[07:32] <DasEi> karma: on a dualboot 1) win 2) swap 3) root .. better extended, case a later crypt or seperate home is needed
[07:32] <karma> cool.. ty
[07:34] <Aeronius> Greetings, any networking pros here?
[07:34] <Jun1us> Aeronius: what's the problem?
[07:35] <DasEi> karma: as slart said, can have up to 4 four primary partitions, but if you set one of them extended, can have > 200 logical inside that, ubu boots from everywhere, whereas win expects a primary to boot from
[07:35] <cforlife> wimt : r u there?
[07:36] <Aeronius> Jun1us: I'm connecting at my University Library to the internet, and it connects for an hour, then disconnects and for the rest of the day, I have problems and if it does connect, I'm lucky.
[07:36] <cforlife> well u can attach it using cprogramming..
[07:36] <ofMortalsAndMen_> so.... i type in /list, but it tells me that its an invalid command
[07:36] <ofMortalsAndMen_> what does that mean?
[07:37] <Aeronius> Jun1us: but for that first hour, it works flawlessly
[07:37] <DasEi> ofMortalsAndMen_: which messenger ?
[07:37] <ofMortalsAndMen_> smuxi
[07:37] <Jun1us> Aeronius: sounds familiar I have that problem at my Uni also, is it just the uni network that does this or do you experience similar problems with home network etc?
[07:37] <karma> thanks for the help.. i an new to linux but i enjoy learning and getting away from proprietary windows
[07:37] <Aeronius> Home network works well all the time.
[07:38] <rocket16> I want to programme GUI in Python. How to start?
[07:38] <rocket16> I mean, Python in Ubuntu. Is there any good tutorial?
[07:38] <Slart> rocket16: might be better to ask in ##python
[07:38] <karma> gonna be fun trying to set up network.. lol
[07:38] <Guest56200> guys
[07:38] <Guest56200> questiobn
[07:38] <Aeronius> Do I need to get the router to reassign me a new IP address at the end of the hour?
[07:38] <cforlife> rocket16-just dowload dive into python
[07:39] <rocket16> Slart: I asked, but it is totally silent. At last, they said that they most use Windows, :(
[07:39] <Slart> Guest56200: just ask it.. no need to warn us in advance =)
[07:39] <xumuk> rocket16, opening Python for a while...
[07:39] <xumuk> Aeronious, for what?
[07:39] <Jun1us> Aeronius: routers should do that for you, is there anything special about this network - does they mention anything in their setup instructions
[07:39] <DasEi> rocket16: http://www.cetus-links.org/oo_python.html
[07:39] <rocket16> xumuk: :) Yes, but isn't there any tutorial for Ubuntu Python development?
[07:40] <Slart> rocket16: hrmpf.. well.. here's a list of gui packages.. might be a good starting point at least http://wiki.python.org/moin/GuiProgramming
[07:40] <rocket16> DesEi: Tanks :)
[07:40] <rocket16> DesEi: Thanks :)
[07:40] <rocket16> Thanks Slart, Desai and xumuk
[07:40]  * rocket16 goes reading
[07:40] <Beaver> xn--9dbafiwmps0c.net
[07:40] <os2mac> !op | cforlife
[07:40] <Guest56200>  my roommates computer has two harddrives
[07:40] <Guest56200>  one is running ubuntu
[07:40] <Guest56200>  the other xp
[07:40] <Guest56200>  Right now, the master is plugged in with the plug that says master
[07:40] <Guest56200>  and the slave one is left hanging
[07:40] <Guest56200>  well she wants it so
[07:40] <karma> is there a linux for dummies site? i want to learn basic commands and be more productive
[07:40] <FloodBot4> Guest56200: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[07:40] <Beaver> www.search2.net a new search engine
[07:40] <Beaver> www.search2.net a new search engine
[07:40] <FloodBot4> Beaver: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[07:40] <Aeronius> Jun1us: No, no special instructions, really, and I've tried restarting dhclient and other things on the command line too
[07:40] <casemods> can anyone help? I have a wifi PCI card but ubuntu doesn't recognize it - how can I install it?
[07:41] <Guest56200> one sec ill pastebin my problem
[07:41] <rocket16> Beaver: Oh thanks. But is it the one made by Microsoft?
[07:41] <DasEi> rocket16: python runs on many platforms, so docu will be python-specific, not host-os specific
[07:41] <coz_> hey guys   I generally save this just in case but this time I didnt...does nayone have a default karmic sources.list??
[07:41] <cforlife> **************can anyone help me as i'm unable to execute a.out using chmod**********
[07:41] <rocket16> DesEi: Ok, thanks
[07:42] <Slart> cforlife: no need to be annoying like that.. just ask your question normally.. without extra stars and stuff
[07:42] <xumuk> rocket16, open Synaptic and type in something like phyton-doc and browse the libraries ( 2 times enter for mark ) , save pressing Apply.
[07:42] <DasEi> coz_:I could give you one, but it'll be from my location, why not use synaptic and create a new one (just change the server) ?
[07:42] <rocket16> xumuk: Already had
[07:43] <coz_> Dasda,  mm  ok
[07:43] <xumuk> rocket16, ok
[07:43] <cforlife> os2mac : do u have mac-os x iso image?
[07:43] <rocket16> xumuk: Thanks anyway
[07:44] <casemods> hi
[07:44] <casemods> can anyone help? I have a wifi PCI card but ubuntu doesn't recognize it - how can I install it?
[07:44] <Jun1us> Aeronious: i take it you have tried just reconnecting from the nm-applet dropdown menu? if you run dmesg | tail in a terminal it might shed some more light also have a look at the /var/log/messages file (you need to sudo) scroll down towards the end and see if anything pops out at you
[07:44] <Guest56200> okay. I have a computer here. I have a master and a slave harddrive. The master has ubuntu 9.10 on it. The slave has xp on it. I want to be able to connect both so that I can choose the OS on startup. So I ran the cable master to master and slave to slave and gave it some power from the source but when I boot it up it gives me an error. Any ideas?
[07:44] <rocket16> But one thing, the C++ documentation had been downloaded earlier, but I can't open or find it, :( How to open it?
[07:44] <DasEi> casemods: I#m not good at wifi, but while you wait :
[07:44] <DasEi> !wifi
[07:44] <rocket16> !python
[07:44] <Jun1us> also some people have reported that changing to wicd (sudo apt-get install wicd) instead of the default network-manager solves these kinds of problems (it worked for me a while ago at least)
[07:45] <eri> hi
[07:46] <Guest56200> okay. I have a computer here. I have a master and a slave harddrive. The master has ubuntu 9.10 on it. The slave has xp on it. I want to be able to connect both so that I can choose the OS on startup. So I ran the cable master to master and slave to slave and gave it some power from the source but when I boot it up it gives me an error. Any ideas?
[07:46] <Aeronius> Jun1us: I'll try it, but any other thoughts?
[07:47] <rocket16> How to read documentations? Is there any command? I downloaded C++ Documentation, but can't find it,
[07:47] <wols> rocket16: "man"
[07:47] <Jun1us> Aeronious: which wireless driver are you running ndiswrapper or something like ath9k (right clicking nm-applet and selected connection information should tell you)
[07:47] <cforlife> i quit()
[07:47] <rocket16> wols: Thanks, trying...
[07:47]  * rocket16 is trying to "man"
[07:47] <Aeronius> hello?
[07:48] <holmser> anyone here messed with zoneminder?
[07:48] <wols> Aeronius: sudo lspci -nn
[07:48] <xumuk> rocket16, or  sudo find / -name C++ | grep doc
[07:48] <rocket16> xumuk: Ok, thanks, :)
[07:50] <ActionParsnip> Yo yo yo
[07:50] <rocket16> ?
[07:50] <snxs> can someone help me setting up a ssh connection on ubuntu 9.10 ? for http traffic. thanks.
[07:51] <rocket16> I tried to "man python" but only a few lines are given. The second command is taking long to complete, :(
[07:51] <Aeronius> Jun1us: I didn't see either of those, but I opened about and it says networkmanager applet 0.7.996, is that what you mean?
[07:51] <denis-k> !help | ActionParsnip
[07:52] <ActionParsnip> Snxs: http://www.ubuntugeek.com/manage-ssh-tunnels-with-gnome-ssh-tunnel-manager.html
[07:52] <KIAaze> @rocket16: Look in synaptic for the list of installed files if you installed the doc through a package. Or use "dpkg -L PACKAGE"
[07:52] <DasEi> snxs: sure, before quitting, two ubuntu machines ?
[07:52] <xumuk> rocket16, try with page up&down keys...
[07:52] <ActionParsnip> Denis-k: I'm in here daily to help. I have zero ubuntu problems. Do you have a problem I can help with?
[07:52] <rocket16> O, trying both,
[07:53] <rocket16> Ah! Got it, thanks xumuk, :)
[07:53] <rocket16> Bye and thanks again friends
[07:53] <xumuk> bye
[07:53] <snxs> thanks ActionParsnip
[07:53] <denis-k> ActionParsnip: yes actually, how can someone connect to my ubuntu laptop from an xp machine, without using VNC?
[07:53] <snxs> what do you mean DasEi ?
[07:53] <KIAaze> did anything happen to MSN lately? I can't connect with either pidgin or kopete. :(
[07:53] <denis-k> *remote desktop
[07:54] <DasEi> snxs: you want to connect two boxes via ssh..
[07:54] <ActionParsnip> Denis-k: connect has a vast array of meanings. What are they connecting for?
[07:54] <Aeronius> wols: I ran the command, didn't need sudo,
[07:54] <KIAaze> I even had to recreate an account for some reason, which is scary. (and windows live allowed recreating it with the same e-mail address)
[07:54] <denis-k> ActionParsnip, just *'ed it, remote desktop
[07:54] <wols> Aeronius: and what did it say?
[07:54] <ActionParsnip> Kiaaze: check your server. Also try the pidgin ppa or even amsn or emesene
[07:55] <Aeronius> wols: a lot, what do you want?
[07:55] <Jun1us> wols: the output of lspci -nm is designed to be machine readable is it not?
[07:55] <Tapout> how can I recursively compare 2 different folders.. anyone know an app?
[07:55] <ActionParsnip> Denis-k: tried ssh with x forwarding, you can use xming on the windows client to make an x server for the apps to stick to
[07:55] <snxs> DasEi , no , i want to settup a ssh tunnel for safer browsing ... so i need to type a command on terminal, then modify proxy settings of firefox something like that.
[07:55] <wols> Jun1us: unix machines like to parse text, so I guess... yes?
[07:55] <Slart> Tapout: diff
[07:55] <Tapout> binary files tho
[07:55] <ActionParsnip> Denis-k: its also secure which vnc is not so is usable over wan
[07:55] <DasEi> snxs: is it tor what you want ?
[07:56] <Lanlost_> *cough* ... so..
[07:56] <Lanlost_> I was tired of my iptables so I did sudo iptables -F and sudo iptables -t nat -F
[07:56] <Lanlost_> ...
[07:56] <Slart> Tapout: diff doesn't do binary files? my bad then
[07:56] <Lanlost_> apparently this didn't do what I thought it did
[07:56] <Lanlost_> although, now when I do it.. its fine
[07:56] <snxs> no
[07:56] <Aeronius> ethernet controller and network controller look relevant, what do I give you?
[07:56] <Lanlost_> but suddenly I couldn't get to any site heh
[07:56] <Tapout> no it does, but i was thinking like a recursive md5 or something, i'll see
[07:56] <Lanlost_> luckily, for some reason, I had typed sudo iptables-save and I looked it up to see what it did (I was hoping it was a manual way to save the iptables instead of rebooting, thus anything I did I could restore)
[07:56] <ActionParsnip> Slart: i'd have thought it could do any file. Data is data right..
[07:57] <Lanlost_> and I saw iptables-restore. Oh thank god my iptables-save was still open in another terminal on another screen about a billion lines up
[07:57] <DasEi> snxs: I don't get your demand then
[07:57] <ActionParsnip> Denis-k: x forwarding is default enabled in openssh-server
[07:57] <Lanlost_> I was able to copy it and feed it into iptables-restore... I still don't have ICS though
[07:57] <Slart> ActionParsnip: well.. it does count lines and stuff.. perhaps it's .. text-oriented =)
[07:57]  * xumuk going smoke
[07:57] <denis-k> ActionParsnip: looks like too much work for my friend (on the xp), is there anyway to get it working via RDP?
[07:58] <Lanlost_> I went to the network manager thing and went to auto eth0 and set it to "Shared to other computers"... I didn't even know this existed. It put the ip at 10.42.43.1. I set the xbox to 10.42.43.2 with the proper gateway to 10.42.43.1 and dns
[07:58] <ActionParsnip> Slart: makes sense but flexibility would be better, oh well
[07:58] <Lanlost_> It doesn't work.. however, the strange thing is that if I ping 10.42.43.1.. I get about 75%-80% packet loss
[07:58] <Lanlost_> how the hell am I getting packet loss to my own computer?
[07:59] <ActionParsnip> Denis-k: there's LTSP
[07:59] <os2mac> Lanlost are you still using Mint?
[07:59] <Lanlost_> yezzir
[07:59] <os2mac> wrong room.
[07:59] <Lanlost_> uh
[07:59] <xumuk> Lanlost_, is there somebody more connected to your access point?
[07:59] <ActionParsnip> Channel
[07:59] <ActionParsnip> !mint
[07:59] <denis-k> ActionParsnip: thanks ill check it out
[07:59] <DasEi> !mintsupport | Lanlost_
[07:59] <ActionParsnip> Denis-k: why do you want remote access
[08:00] <Lanlost_> right.. I'm also running ubuntu though on my laptop
[08:00] <os2mac> but your asking about support for Mint....
[08:00] <eycel> hi action
[08:00] <Lanlost_> no..
[08:00] <Lanlost_> I'm switching between the two
[08:00] <ActionParsnip> Denis-k: if its for torrents then tranmission has a web interface. Many apps have web uils so the full desktop is overkill
[08:00] <Lanlost_> I'm using Mint on THIS computer, I'm doing most of the stuff on the laptop
[08:00] <ActionParsnip> Eycel: howdy
[08:00] <nine1> How can I manage sessions for gdm?
[08:00] <denis-k> ActionParsnip: for a programming project.
[08:00] <DasEi> Lanlost_: you said above that you couldn't follow the tut as it was mint's network-manager, nor ?
[08:01] <Lanlost_> what?...
[08:01] <ActionParsnip> Denis-k: programming in text right?
[08:01] <Slart> nine1: there is the "gnome-session" command.. that might enable you to do some stuff.. note! don't just run it .. read the man page first
[08:01] <Lanlost_> It had nothing to do with Mint's network-manager
[08:01] <denis-k> ActionParsnip: yes.
[08:01] <Lanlost_> I'm telling you, I'm doing this stuff on my laptop
[08:01] <Jun1us> Aeronious: there are easier ways to find your device info just run lspci (without -nm) and it will tell you your wireless chipset
[08:01] <ActionParsnip> Denis-k: you can code in an ssh session
[08:01] <Aeronius> wols: now what?
[08:01] <Lanlost_> which is Ubuntu. I don't see why you are fighting me about it
[08:01] <Aeronius> ok
[08:01] <ActionParsnip> Denis-k: using nano or vi
[08:01] <wols> Aeronius: PCI id of both
[08:02] <denis-k> ActionParsnip: does windows of ssh?
[08:02] <Lanlost_> I'm using Karmic on my laptop, Mint on my desktop. I have a Presario C500c laptop .. I don't know how else to prove this
[08:02] <xumuk> Lanlost_, there's a reason of lost packages, you have > 1 computers connected to same modem...
[08:02] <denis-k> *have
[08:02] <ActionParsnip> Denis-k: you can use putty to connect to the ssh and use nano to edit the text files and compile from
[08:02] <DasEi> (08:29:43) Lanlost_: that link didn't work, theres no system -> preferences -> sessions in Mint. I'll figure it out though
[08:03] <Lanlost_> er.. wait.. My connection to my router and then to the modem is wlan0
[08:03] <Lanlost_> that connection is getting no packet loss
[08:03] <Aeronius> ?what's the pci id?
[08:03] <Lanlost_> the eth0 is getting packet loss, doesn't matter if I connect it to my desktop or to my xbox
[08:03] <Lanlost_> heh, I'm going to go smoke
[08:03] <wols> Arkava: there will be a number at the start of the line. 8 number/letters and a :
[08:03] <wols> that one
[08:04] <denis-k> ActionParsnip: I guess that could work, I'll try it out
[08:04] <wols> Aeronius: apologies. it's at the end of the line
[08:04] <xumuk> Lanlost_, by cable? lost packages? o_O
[08:04] <denis-k> ActionParsnip: Thanks.
[08:04] <Lanlost_> xumuk, that's wha tI'm saying
[08:04]  * xumuk 's smoking...
[08:04] <Lanlost_> I'm plugging directly from eth0 on my laptop to either my ethernet on this desktop or the ethernet in the xbox
[08:04] <Aeronius>  Broadcom Corporation BCM4401-B0 100Base-TX (rev 02
[08:04] <ActionParsnip> denis-k: most users automatically go for full desktop access when there is usually a more graceful method
[08:05] <Lanlost_> in both cases I ping 10.42.43.1 (which is what my eth0 is set to) and I get packet loss.. seems like that would be a loop back and should be perfect
[08:05] <Aeronius> Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
[08:05] <Lanlost_> ping my own eth0 ip on my own computer
[08:05] <si> where is xumuk
[08:05] <Lanlost_> 368 packets transmitted, 100 received, 72% packet loss, time 368299ms
[08:05] <os2mac> Lanlost_: are you using a cross_over?
[08:05] <Guest23704> CIAO!
[08:05] <Lanlost_> yup
[08:05] <denis-k> ActionParsnip: SSH being the graceful one?
[08:05] <Aeronius> wols:
[08:06] <KIAaze> live.com: There's a temporary problem with the service. Please try again. If you continue to get this message, try again later.
[08:06] <ActionParsnip> Denis-k: if you can find a way for windows to access sshfs then you can make a "drive" for it and it will access the files securely over wan or lan
[08:06] <os2mac> pinout?
[08:06] <Lanlost_> ok, so cross over IS an issue then?
[08:06] <xumuk> Lanlost_, any server? or U're trying only one?
[08:06] <duncanidaho1> will there be an x86_64 version of 10.4?
[08:06] <Lanlost_> any server?
[08:06] <Lanlost_> why would I be trying any other server man?
[08:06] <Lanlost_> I'm not testing an internet connection..
[08:06] <ActionParsnip> Denis-k: its closer to what you need, a text editor and compiler rather than running the entire desktop
[08:06] <theadmin> duncanidaho1: Obviously.
[08:06] <Lanlost_> there is only one computer connected to this
[08:06] <Lanlost_> in the entire world
[08:07] <ActionParsnip> Denis-k: freenx is another remote desktop app but I've not uused it
[08:07] <Lanlost_> wlan0 is connected to the internet, it has no packet loss. Eth0 has packetloss.. it is connected to one computer with a cross over cable.
[08:07] <Lanlost_> I'm going to swap cables and smoke
[08:07] <duncanidaho1> I just couldn't find a beta version only an amd64
[08:07] <denis-k> ActionParsnip: the ssh+nano should be good enough, i dont have a system running all the time for an FS to be put into use, and its only a short-term thing, 2-3 days
[08:07] <si> echo.xumuk-u-r-going to be killed man . simply unplug pc and find a safe place
[08:07] <Tapout> is there an app inside ubuntu that will let me recurisvely md5 a directory structure so i can compare on another server?
[08:08] <Slart> !ops | si
[08:08] <Tapout> cfv
[08:08] <xumuk> Lanlost_, for know if it only loses packages from this server ... if so it's server problem if not it's connection ...
[08:08] <Tapout> cfv
[08:08] <ActionParsnip> Tapout: if you use find and -exec you can script it easily
[08:09] <Lanlost_> xumuk, but I'm pinging myself!
[08:09] <xumuk> yes, but by http protocol...
[08:10] <Lanlost_> ok?
[08:10] <Lanlost_> I am the server though
[08:10] <Lanlost_> there is nothing plugged into eth0 now
[08:10] <wols> ICMP is http now? cool!
[08:11] <Lanlost_> I'm not saying I'm getting packets now =P
[08:11] <os2mac> alright, bots... it's been real....
[08:11] <xumuk> wols, may be I didn't understand the problem as well...
[08:12] <Lanlost_> so what is happening when I ping 10.42.43.1, my eth0 assigned address?
[08:12] <ActionParsnip> Wols: that will never happen
[08:12] <Lanlost_> isnt it just sending a ping from 10.42.43.1 to 10.42.43.1?
[08:12] <Lanlost_> even if it is http protocol?
[08:12] <wols> Lanlost_: yes, it all stays in the OS' network stack
[08:12] <Lanlost_> so how is it the connections fault though?
[08:12] <Lanlost_> what connection is that?
[08:12] <wols> and if you get packet loss there, then either your NIC driver or your hardware is fubar
[08:13] <Lanlost_> I feel like it should be the same as aloopback
[08:13] <Lanlost_> thats what I was trying to say wols =P
[08:13] <Lanlost_> thank you
[08:13] <Lanlost_> I thought I was crazy for a second
[08:13] <wolfie1> hello
[08:13] <wols> curious: what NIC hardware?
[08:13] <mathijs> hi all, I'm a bit confused by the java-related packages. many libraries are provided with a -java, a -jni and a -gcj extension. can someone tell me the relation between them?
[08:13] <Lanlost_> well I feel like I've gone too far again
[08:13] <Lanlost_> I've got a massive headache, spent 2+ hours and no ICS
[08:13] <wols> !info iwlwifi
[08:13] <wolfie1> how can I make the windows on my panel to be shown without text?? =)
[08:13] <ActionParsnip> Mathijs: i'd ask in #java
[08:14] <mathijs> ActionParsnip: ok :)
[08:14] <Lanlost_> thanks for the help though
[08:14] <Lanlost_> ill have to try this from this comp instead, maybe it is the nic
[08:14] <Tapout> ls -la
[08:14] <mathijs> ActionParsnip: invite-only channel
[08:14] <Lanlost_> but I transferred about 1.2gb fine.. and quickly with this same nic over the local network
[08:14] <ActionParsnip> Wolfie1: so to just be the icon in the window list?
[08:14] <FireCrotch> I believe that pinging your own IP actually does send the ICMP packets out to the network
[08:14] <wolfie1> yeah, like in windows 7
[08:14] <ActionParsnip> Mathijs: great :(
[08:14] <trulyheart> hi cleo
[08:15] <trulyheart> cleo-r-u-there
[08:15] <theadmin> Can anyone help me? On "find / -type f -exec md5sum "{}";" it sezzit that there is a missing argument to -exec
[08:15] <ActionParsnip> Firecrotch: no, they use the software loopback device so they are kept in the nic
[08:15] <Tapout> -exec md5sum "{}" \;
[08:15] <Tapout> \; <-- this
[08:15] <theadmin> Oh, that stupid slash.
[08:15] <ActionParsnip> Theadmin: what tapout said
[08:15] <Tapout> shell will eat up the ;  .. so you \;
[08:16] <KIAaze> weird. MSN works again and I didn't loose any contacts. But how could windows Live allow me to create a new account with the same email address? O.o
[08:16] <FireCrotch> ActionParsnip: Hm. that's stupid
[08:16] <FireCrotch> that's what 127.0.0.0/8 is for
[08:17] <wolfie1> helP? how can I quit the text on the window list on the gnome-panel ??
[08:17] <ActionParsnip> Firecrotch: that's afaik. Pinging self would resolve to localhost and not use any more lan bandwidth
[08:17] <theadmin> Tapout: There. This works: find / -type f -exec md5sum "{}" \; > somefile.md5sums (replace / with some other directory if you want not all files but only recursively from a certain dir)
[08:18] <traeq> ActionParsnip: there should be an easy way to test that
[08:18] <FireCrotch> ActionParsnip: Well I did a traceroute to my local IP and it didn't leave, so I assume that a normal ping won't either
[08:18] <ActionParsnip> Wolfie1: right click the windows list -> properties may give clues
[08:19] <doc_> hello mens
[08:20] <trulyheart> hello mens,doc_
[08:20]  * xumuk 's getting high...
[08:20] <Tapout> theadmin, i got cfv installed and using that.. so much easier ;)
[08:20] <bazz> does there exist a command line app that will dump all events for a particular date in plain text format out of an iCal file?
[08:21] <Tapout> cfv -C -t md5 -rr dir   .. and then on another machine;  cfv -f file.md5
[08:21] <theadmin> Tapout: Well, never used it. Mine works too though :D
[08:21] <trulyheart> Tapout: Well, never used it. Mine works too though :D
[08:22] <theadmin> trulyheart: Huh? Why do you repeat what i say
[08:22] <kthomas_vh> how to get a canon or logitech camera to play ball with Ubuntu?
[08:23] <trulyheart> theadmin: do u know about xumuk
[08:23] <theadmin> trulyheart: Uh, no idea what that is
[08:23] <abhinav> kthomas_vh: it is plug and play generally
[08:23] <Jun1us> Aeronious: try this - people have reported success with it (this is a well known bug in the ipw2200 driver you are (should) be using)     type in terminal: service NetworkManager stop   then rmmod ipw2200 ; modprobe ipw2200  and then restart again with service NetworkManager start
[08:24] <Jun1us> Aeronious: if that works you could make a small script to automate it (makes it a bit less of an ugly workaround) also check out https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/458577 for more info
[08:24] <abhinav> kthomas_vh: Once you plug it in, in the latest ubuntu versions, you get a screen asking what you want to do (open device, open folder, view image etc). just like you get in windows.
[08:24] <kthomas_vh> hmm
[08:24] <Aeronius> k thanks
[08:24] <kthomas_vh> I'd been told different :)
[08:24] <Aeronius> I gotta sleep now
[08:24] <Jun1us> you're welcome - best of luck
[08:24] <Aeronius> good night!!!
[08:25] <DasEi> n8
[08:25] <traeq> bazz: I'm just going off a google search here, but did you take a look at Remind? ( http://www.roaringpenguin.com/products/remind )
[08:25] <abhinav> kthomas_vh: Well, has worked for me for quite a few years . If you have one and are facing problems, let us know.
[08:26] <abhinav> kthomas_vh: I have used it for 5 years now with a canon camera (A300 IIRC, more recently S1 IS and S3 IS)
[08:26] <kthomas_vh> tks
[08:26] <bazz> traeq: i found something that will convert ical to remind format, but i wasn't sure if remind can read ical natively.  i suppose i could run the conversion, but wasn't sure if remind can just dump events to the command line
[08:27] <DasEi> trulyheart: next bot ?
[08:28] <traeq> bazz: fair enough. if there's a conversion script then the program itself is probably going to do something a little more complicated than just what you're looking for. you could (if you are somewhat familiar with programming) attempt to examine the script you found yourself?
[08:28] <bazz> traeq: yeah, i'll just use libcal and write something to do it myself if it doesn't exist, but it seemed like something should already exist to do this
[08:29] <ActionParsnip> Yo yo yo
[08:29] <traeq> bazz: sorry, but it seems i am just as capable as finding out as you are. :(
[08:29] <Omar_> hi
[08:29] <abhinav> !hi | Omar_
[08:29] <Guest111> ubuntu you did it I've been along time linux user of many distros and you have made a top notch windows killer with 10,04
[08:30] <Guest111> i'm running the beta and its awsome
[08:30] <abhi_nav> hmm
[08:30] <Guest111> it has the speed of arch and slackware but the usability of ubuntu
[08:30] <ActionParsnip> Guest111: lucid is offtopic here
[08:30] <traeq> 10.04 was released?
[08:30] <theadmin_clone> theadmin: c.c:2.21: error :iostream.h:no such file or directory
[08:30] <traeq> oh.
[08:31] <ActionParsnip> Traeq: there's a beta available. Its not officially released
[08:31] <AbortD> whats a good updated program for desklets?
[08:31] <DasEi> !lucid | traeq
[08:31] <ActionParsnip> Abortd: gdesklets
[08:31] <abhinav> !screenlets ! AbortD
[08:31] <ActionParsnip> Abortd: kde uses widgets
[08:32] <abhinav> AbortD: screenlets
[08:32] <abhinav> !screenlets | AbortD
[08:33] <Guest111> yeah i know it's still a beta but believe me i've beta tested alot and you know when something is going to be good when the beta is as stable as a main distro release of suse or mandriva or slack
[08:33] <theadmin> theadmin_clone: wud
[08:33] <AbortD> isnt gdesklets not updates
[08:33] <Guest111> i don't want to start a conflict i just want to say thank you guy
[08:33] <AbortD> i didnt think screenlets was either
[08:33] <DasEi> theadmin_clone: bot-ing/trolling on ?
[08:34] <theadmin_clone> DasEi> theadmin_clone: bot-ing/trolling on ?
[08:34] <theadmin_clone> DasEi> theadmin_clone: bot-ing/trolling on ?
[08:34] <theadmin_clone> DasEi> theadmin_clone: bot-ing/trolling on ?
[08:34] <FloodBot4> theadmin_clone: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[08:34] <abhi_nav> !troll | theadmin_clone
[08:34] <ActionParsnip> Abortd: its just something I know of. I hate all desktop clutter personally
[08:34] <DasEi> !ops | theadmin_clone
[08:35] <Guest111> now only if i can get my wife to make the switch
[08:35] <DasEi>  theadmin_clone  , farmer trulyheart, bot-ing and trolling users
[08:35] <ActionParsnip> Guest111: it may not suit her needs
[08:36] <AbortD> ActionParsnip, i dont mind useful clutter
[08:36] <Guest111> yeah but it would be so much easier to use NFS then Samba lol
[08:36] <morphix>  How can i set Squid-cache up so that certain IPs are required to authenticate to the proxy, but other IPs i specify don't have to specify username/password?
[08:36] <ActionParsnip> Guest111: in what way easier?
[08:36] <Guest111> all linux no windows
[08:36] <ActionParsnip> Abortd: I can be shown anything I need using my scipts in guake ;)
[08:37] <AbortD> im looking for desklets like weather and stuff that type of deslet
[08:37] <ActionParsnip> Guest111: if she wants to play the latest pc games releases then ubuntu may present issues
[08:38] <Guest111> she doesn't play pc games its college software requiremets that keeps her from switching
[08:38] <ardchoille> Guest111: Linux may not be best for her,it's different for everyone. However, you can slowly introduce FOSS by switching her to firefox and openoffice.organd stuff like that.
[08:38] <abhinav> AbortD: what are you looking for that is not available in screenlets ?
[08:38] <ActionParsnip> Guest111: then ubuntu doesn't suit her needs
[08:39] <Guest111> yeah i know
[08:39] <AbortD> oh that stuff is in screenlets?
[08:39] <bj0rn> hey, I'm mounting a ext4 filsystem from a file using rw,loop but after a while (?) any write command to the mounted disk reports that it's a read only file system.. what might be wrong?
[08:39] <Guest111> it's just a dream
[08:39] <Guest111> i go to school also and my school a community college welcomes opensource with arms open
[08:40] <DasEi> bj0rn: why loop ? what about permissions in the mount-dir ?
[08:40] <abhinav> AbortD: lots of stuff. check it out before deciding whether it's ok for you. Personally I liked it when I installed it, but then found it to be too cluttered to justify running it
[08:40] <abhinav> AbortD: also check out conky
[08:40] <abhinav> !conky | AbortD
[08:40] <bj0rn> DasEi: I thought loop was req. when mounting a file system image
[08:40] <ranjan> hello every body does any body know's how to turn off auto download of electric ship  on Ubuntu 9.10 any help would be of great help thanks in advance
[08:40] <AbortD> i saw conky does that have stuff like weather updates?
[08:40] <Guest111> i just wish open source and fsf would be adopted in more schools and universities
[08:41] <ActionParsnip> Abortd: if you script it so it could
[08:41] <theadmin> Guest111: Well, we have Fedora at school
[08:41] <DasEi> bj0rn: ahh, an image , I see , you won't have write access to it then
[08:41] <marxist> Hi
[08:41] <abhinav> AbortD: conky is more of a scripting framework, that allows fetching weather and displaying it - along with a lot of other stuff
[08:41] <abhi_nav> theadmin: you are in school? !!
[08:41] <bj0rn> DasEi: oh? but it works for a while :)
[08:41] <abhinav> AbortD: reg weather, there should be many scripts already available - just search for them
[08:41] <DasEi> bjorge: possible writing to cache
[08:41] <theadmin> abhi_nav: Somewhat, in russia "school" is a huge period, nearly until 18 years :/
[08:41] <AbortD> do i have to script this stuff?
[08:41] <ActionParsnip> Guest111: leeds met uni uses a lot of unix, sun and redhat workstations
[08:41] <SmokeyD> hey everyone. I still can't solve the following problem: I have an usb device plugged in which I can only see with "sudo lsusb" but not with lsusb as normal user. How can I change the permissions of the device so it is visible with lsusb for normal users?
[08:41] <AbortD> oh ok
[08:41] <theadmin> abhi_nav: I'm 16
[08:41] <traeq> my school ran netbsd, but that was the cs department so that's sort of cheating
[08:41] <AbortD> is it in the repos?
[08:42] <abhi_nav> theadmin: Ohh I see I ddnt know that. good I am also in 2nd year computer engineering
[08:42] <ranjan> ActionParnsnip::: Abortd :; you were lucky .. cause you were introduced to this .. at school level  :)
[08:42] <abhinav> AbortD: should be. Else search on launchpad for a ppa
[08:42] <Guest111> what kind of device are you using smokey
[08:42] <rameshwor> i had downloaded a lot of package files before and i copied them all in my thumb drive.. and i formatted and did a new install of ubuntu  how do i install those packages.. ??
[08:42] <abhinav> !ppa | AbortD
[08:42] <DasEi> AbortD: it is in the repos and is pre-configured, but for weather and such got to re-configure it
[08:42] <marxist> This ubuntu acts too smart. How do I login to root from the gdm? (i know the risks)
[08:43] <ActionParsnip> Ranjan: I was using it just before uni (uni started at 19 for me and I'm now 29)
[08:43] <AbortD> oh
[08:43] <AbortD> meh
[08:43] <theadmin> marxist: see http://help.ubuntu.com/community/RootSudo
[08:43] <DasEi> marxist: you know .. sudo -s
[08:43] <ActionParsnip> Ranjan: its just using an OS to learn it. On windows desktops I suck
[08:43] <theadmin> DasEi: -s? What does that do?
[08:43] <iceroot> marxist: sudo -i
[08:43] <Guest111> you know before 10.04 I used to think gnome was ugly but now i perfer it over kde
[08:44] <DasEi> theadmin: gives you an -dangerous - root account in trml
[08:44] <rameshwor>  ^ ^
[08:44] <ActionParsnip> Theadmin: its like -I but uses the callers profile rather than roots
[08:44] <theadmin> iceroot: He wants to log in to X as root
[08:44] <ranjan> ActionParnsnip:::  I to .. support's your views
[08:44] <iceroot> theadmin: ah ok
[08:44] <Guest111> just a personal opinion of course
[08:44] <AbortD> abhinav what do you mean screenlets was too much clutter dont you just pick what you want displayed
[08:44] <ActionParsnip> Ranjan: can you expand that
[08:44] <ActionParsnip> Guest111: there are more desktops than gnome and kde
[08:45] <Guest111> yeah i know flux xfce lxde
[08:45] <marxist> I know sudo -s. I need X as root.
[08:45] <shazbotmcnasty> there are still more.
[08:45] <Guest111> but i like the full environment
[08:45] <abhinav> AbortD: true. More accurately, I found it distracting and stopped using it. But it does what you're looking for :)
[08:46] <ActionParsnip> Guest111: e17. Flwm as well as the many tiled ones ;)
[08:46] <theadmin> marxist: Dangerous but... "sudo passwd root"
[08:46] <AbortD> distracting?
[08:46] <DasEi> marxist: can't understand that way , like sudo nautius ?
[08:46] <theadmin> marxist: To re-disable: "sudo usermod -p '!' root"
[08:46] <ActionParsnip> Guest111: lxde is my choice here, no nonesense down to business light and above all fast
[08:46] <ranjan> ActionParnsnip:::  I to don't prefer to work with windows but sometimes  I find my self help less.. then only I use to use that
[08:46] <ActionParsnip> Theadmin: don't advise users of that please
[08:46] <DasEi> marxist: can't understand that way , like sudo nautilus ? *
[08:47] <Hej> hello! Does anyone know if it is possible to make a legacy dual boot with windows 7 and a VHD Backtrack4 ?
[08:47] <theadmin> ActionParsnip: He said he knows the risk... Well... He gets what he wants
[08:47] <ActionParsnip> Hej: backtrack isn't supported here
[08:47] <Guest111> yeah i was going to give lxde a shot if the newest beta didn't work but it did so i guess i'll just use beta 1 and so on till stable comes out
[08:47] <DasEi> marxist: what do you actual want to do ?
[08:47] <ActionParsnip> Theadmin: ok, that's fine. He'll see
[08:47] <Hej> ActionParsnip, ok, but it should be pretty similar as ubuntu while booting, right?
[08:48] <ActionParsnip> Guest111: lubuntu is just round the corner ;)
[08:48] <xumuk> Dasda, as I unterstend he wants to log into gdm as root...
[08:48] <ActionParsnip> Hej: no idea. Not used it.
[08:48] <abhi_nav> 9.10 boots faster uses that something called upstart
[08:48] <ActionParsnip> Hej: its not discussed or supported here
[08:48] <Hej> ActionParsnip, allright. But do you know if it's possible to boot from a VHD Ubuntu then?
[08:49] <Kartagis> can someone show me a screenshot of their msn settings in pidgin please?
[08:49] <ActionParsnip> Hej: what's VHD?
[08:49] <DasEi> Hej: virtual hd ?
[08:49] <Hej> ActionParsnip, Virtual Harddrive
[08:49] <theadmin> Kartagis: Just a sec.
[08:49] <ActionParsnip> Hej: if you can install an OS to it and grub can boot it. Why not
[08:49] <ranjan> ActionParnsnip:::  I love freedom of thought's .. as it can be found on this platform  .. I don't think other's support freedom .. in software industry .. others mainly micosoft's have always tried to dictate the market .. and I don't like monopolistic approce in any spare of life .. :)
[08:50] <ActionParsnip> Ranjan: bsd does too
[08:50] <Guest111> 10.04 boots faster and reboots faster than anything that i have seen after install updates
[08:50] <DasEi> Hej: real wrong chan here, yes can have bt as vm in win
[08:50]  * abhi_nav is highly agree with ranjan
[08:50] <Kartagis> !lucid
[08:50] <ActionParsnip> Guest111: look into xpud. Boots faster than all.
[08:50] <Guest111> i'm using an ati card and no need for proprietary drivers
[08:50] <Hej> DasEi, private?
[08:50] <theadmin> Kartagis: The advanced tab: http://dl.dropbox.com/u/2012912/Screenshot.png - You'll need to update pidgin if it doesn't connect.
[08:50] <Hypcrum> Guest111: how fast does it resume after hybernate?
[08:50] <DasEi> hej: #vbox
[08:50] <ActionParsnip> Guest111: if your judgement of an OS is boot speed then I pity you
[08:51] <ranjan> ActionParnsnip:::  I don't have any idea regarding bsd
[08:51] <Kartagis> theadmin, thanks, I'm already at the latest version
[08:51] <theadmin> meh Ubuntu boots and works amazingly fast, but OpenOffice acts slowly
[08:51] <Kartagis> erm. I think
[08:51] <ActionParsnip> Ranjan: its another fork of open source os
[08:51] <Guest111> nah its not boot speed but it is nice to be on a desktop in a mater of seconds
[08:51] <ranjan> abhi_nav:  Am i wrong
[08:51] <theadmin> Kartagis: Did you add their repository? (instructions on how to do it on pidgin.im)
[08:51] <abhi_nav> ranjan: ahhhhh?????????/ what??????////
[08:51] <Guest111> hibernate or suspends takes a little to no time
[08:51] <ActionParsnip> Guest111: xpud boots in 3 seconds here
[08:51] <abhi_nav> ranjan: wrong? why? what happend?
[08:52] <DasEi> theadmin: try abiword
[08:52] <ranjan> abhi_nav:  you got angry on me ..
[08:52] <rameshwor> hwo do i again install all the .deb packages that i copied earlier..
[08:52] <abhi_nav> ranjan: no! but why? what happends?
[08:52] <BryanWB> anybody here ever tried to compile the examples from W. Richard STevens "Advanced UNIX Programming" on Ubuntu?
[08:52] <theadmin> DasEi: Meh, i just need to update to OOo 3.2, which is like ten times faster
[08:52] <ActionParsnip> Guest111: it has few drivers and a few great apps but its fast
[08:52] <abhi_nav> ranjan: I think you are confusing. I am talking about that fast boot matter
[08:52] <Guest111> stability is first along with usability then speed of access then speed of boot
[08:53] <Guest111> security also ranks first
[08:53] <DasEi> theadmin: or so
[08:53] <rameshwor> after doing a fresh install how do i install the .deb packages that i'd downloaded previously and saved in thumb_drive .????
[08:53] <ranjan> ActionParnsnip::: but i dont have that much time to try new os  but may be in the future i'll do ..
[08:53] <Hypcrum> rameshwor: you can double click them :P
[08:53] <abhi_nav> rameshwor: double click on them
[08:53] <abhi_nav> :D
[08:53] <hipitihop> is there are
[08:54] <rameshwor> abhi_nav: Hypcrum : i get a lot of dependency problems. so i'd like to to search itself...for depencies in the folder..
[08:54] <DasEi> theadmin: I use oo just on one machine, as I feel it being to heavy even on faster boxes, and I don't need most of the stuff, things like fast upstart , convience and compatibilty to word is what gave abiword it's credit
[08:54] <abhi_nav> rameshwor: next time use aptoncd
[08:54] <Hypcrum> <rameshwor: what program?
[08:54] <Guest111> for the record i do like the minimize and maximize on the left side makes everything in one place
[08:55] <theadmin> Sorry, leaving now. Bye everyone.
[08:55] <ranjan> abhi_nav:  ya .. I got it  That was my mistake I read it as angry where as it was you agree with my views .. Sorry for that
[08:55] <rameshwor> Hypcrum: i had downloaded a lot programs. and i copied /var/cache/apt/archives     to thumb drive.. and i don't want to download them again.. it take alot time.
[08:56] <abhi_nav> ranjan: ohh :D haa haa yah I written AGREE and not ANGRY. You cleared now?
[08:56] <ranjan> abhi_nav:  yes .. thanks for rectifying me ..
[08:56] <abhi_nav> ranjan: :D ya!
[08:57] <rameshwor> Hypcrum: : when i do apt-get .. can i configure it to search in a certain folder..??
[08:58] <Hypcrum> rameshwor: you might be abble to add it... im not sure check the packet manager
[08:58] <Logicwax> got a question:  i have fakeraid that ubuntu does great at mounting at /dev/mapper/sil_nfjafrfqqq.   if i format it directly, without a partition table (mkfs.ext4) it works great.   my problem is when i put a partition table on it, it'll only mount after reboot if i do "sudo partprobe"
[08:59] <Logicwax> how can i fix it so that it automounts on boot?
[08:59] <rameshwor> Hypcrum: so i actually want it to search for the dependencies in a certain location rather than slowing errors...  any ways.?
[08:59] <Logicwax> without requiring me to to "sudo partprobe
[08:59] <DasEi> rameshwor: yes, but common for this would be : dpkg -I  /dir/to/folder/bla.deb
[08:59] <Logicwax> im thinking that the kernel at boot time loads the modules to read fakeraid (dmraid) AFTER it looks at the partition tables.   can i reorder this in my initrd?
[09:00] <rameshwor> DasEi: then if it needs any other .debs  then it will search itself.?
[09:00] <afsal> how can i move a file from desktop to modeprobe.d
[09:00] <DasEi> rameshwor: for that must set synaptic to a local place, like :
[09:00] <Hypcrum> afsal> sudo mv file /file/to/modeprobe.d
[09:01] <DasEi> !aptoncd | rameshwor
[09:01] <DasEi> !offline
[09:02] <afsal> but it says no such file or directory
[09:02] <rameshwor> DasEi: : yeah aptoncd. but i already formatted and did a fresh install :(
[09:03] <Hypcrum> afsal: man mv
[09:04] <DasEi> rameshwor: and of course took no list before ? so now could have a ready script ?
[09:04] <Akegata> I'm having issues with network-manager-vpnc. Whenever I try to connect to the vpn, the saved passwords are cleared. Has anyone else had this issue?
[09:04] <DasEi> rameshwor: is your inet so slow or expensive or what broght you to this idea ?
[09:04] <afsal> i have a file in my desktop how can i move it to /etc/modprobe.d
[09:05] <abhi_nav> Akegata: which ubuntu version?
[09:05] <rameshwor> DasEi: : net is slow.. :(
[09:05] <Akegata> abhi_nav: karmic
[09:05] <abhi_nav> Akegata: hmm
[09:05] <DasEi> rameshwor: what does these mean in kbit/s ?
[09:06] <Akegata> abhi_nav: I'm unable to connect to the vpn, probably due to some incorrect setting that I haven't figured out yet, if that makes any difference. Kind of annoying to try those things when the password is cleared all the time though. :P
[09:06] <afsal> how to rename a file in /etc/modprobe.d
[09:06] <rameshwor> DasEi: : don't laugh at me.. i'm currently downloading a pdf from internet and it is around 5 kb/s...
[09:07] <abhi_nav> Akegata: dont know much about it. you try community documentation for it on ubuntu or search bug in launchpad
[09:07] <DasEi> afsal:sudo  mv /etc/whatevr/oldName /etc/whatevr/newName
[09:07] <rameshwor> DasEi: ; but it increases sometimes.. though.
[09:08] <DasEi> rameshwor: that's truly hard, and I don't laugh
[09:08] <Akegata> abhi_nav: Yeah guess I'll have to google it more..
[09:08] <afsal> thnx dasei
[09:09] <DasEi> rameshwor: but also you need the updates... kernel features, patches and such ..
[09:09] <abhi_nav> Akegata: hmm
[09:10] <rameshwor> DasEi: : i don't install them generally..
[09:10] <DasEi> rameshwor: and you don't have any other access point ? like another machine ? quite bad you didn't pulled a package list of that installed system
[09:10] <marxist> Hi
[09:10] <rameshwor> DasEi: : it's not official or any big use. its just my personal use. so.. i don't care much about security issues.
[09:11] <rameshwor> DasEi: no.. but speed gets around 20-25 sometimes.. when  no other students are using internet.at around 1 am :). " im in a student hostel "
[09:12] <DasEi> rameshwor: but you don't want to be part of a botnet.. and possibly well functionin hardware.. well  on that bandwith the interest of that abuse might be small, anyway right
[09:12]  * xumuk 's getting weeds
[09:12] <DasEi> rameshwor: so you can install minimal-cd, and then app-wise over night
[09:12] <rameshwor> DasEi: : of course i don't wanna be part of "BOTNET"
[09:13] <wedo> hello all: I had resized my swap to a bigger capacity by GParted, but when I look to the System monitor I find the swap capacity still as it was before resizing, ANY HELP PLZ?
[09:13] <xumuk> DasEi, otherwhise he shall install Arch xD
[09:13] <hipitihop> is there a command to tell what window manager is in effect for a given user/session ?
[09:14] <bazhang> xumuk, please take chat to #ubuntu-offtopic
[09:14] <othernick> Limited msgs 2 type in networkmanager i setup to connect by my mobile phone u der t
[09:14] <othernick> e
[09:14] <othernick> Limited msgs 2 type in networkmanager i setup to connect by my mobile phone u der t
[09:15] <xumuk> hipitihop, get env listing...
[09:16] <hipitihop> xumuk, could
[09:16] <wedo> hello all: I had resized my swap to a bigger capacity by GParted, but when I look to the System monitor I find the swap capacity still as it was before resizing, ANY HELP PLZ?
[09:17] <DasEi> hipitihop: bad syntax, just out the edge : ps -aux | grep display
[09:18] <xumuk> hipitihop,  env | grep -i gdmsession
[09:19] <ranjan> wedo :: please have an look at https://help.ubuntu.com/community/SwapFaq
[09:19] <hipitihop> x
[09:20] <xumuk> hipitihop, di u get it?
[09:21] <ranjan> wedo :: after creating more amount of swap you need to update those entries in fstab file  .. so that system can get correct  information
[09:21] <Uunreal> hey everyone, I have a question. I'm trying to enter the PulseAudio daemon but I get a "daemon is already running" error message. How can I get into it?
[09:22] <wedo> ranjan, how to update it in fstab?
[09:22] <hipitihop> xumuk, sorry, having keyboard probs here... ok so ' env | grep -i gdmsession' shows gnome, so what does it mean when it shows nothing for another session when I login via ssh ?
[09:22] <AbortD> can amarok be installed in gnome without bringing abunch of kde garbage with it?
[09:22] <ranjan> wedo :: by using this command "sudo gedit /etc/fstab"
[09:22] <abhinav> AbortD: it needs the kde infra
[09:23] <ranjan> wedo:; things'll open in gedit
[09:23] <AbortD> damn
[09:23] <wedo> ranjan, so I have to write the new capacity myself, isn't it?
[09:23] <DasEi> AbortD: if you want a tighter one, use vlc
[09:23] <FireCrotch> AbortD: It'll bring a bunch of KDE stuff, no garbage though
[09:23] <abhinav> AbortD: and kde has improved quite a lot in recent years. I don't know what impression you have reg it :) (I had the same impression, from 6-7 yrears back. launched it in karmic and was pleasantly surprised)
[09:23] <xumuk> hipitihop, eeeee.... what? It shows nothing when u do what?
[09:23] <ranjan> wedo:; yes ... I think so
[09:24] <wedo> ranjan, thank you
[09:24] <AbortD> i just like how gnome is set up
[09:24] <theadmin> Hello again. I haz lamp-server. I want to install PhpMyAdmin and make it interact with the MySQL of that server, how can I?
[09:24] <abhinav> AbortD: that's fine. but it isn't garbage. :)
[09:24] <DasEi> wedo: if you want the uuid, sudo blkid will tell you correct uuid of new swap, but can use /dev/sd**, too
[09:25] <xumuk> theadmin, can u log in as root in phpmyadmin?
[09:25] <hipitihop> xumuk, when I do  'env | grep -i gdmsession' in this session it shows 'GDMSESSION=gnome' however if I log into another user via ssh, the same command just returns showing nothing
[09:25] <theadmin> xumuk: Well, managed to do so on Windows
[09:25] <hipitihop> xumuk, maybe you
[09:25] <AbortD> never said it was but last time i installed a kde program i got like every kde package
[09:25] <ranjan> wedo:; yes you need it to update as .. this is the change that has been introduced in the system after installing it .. so system have it's own record which need to be updated .. so that ubuntu can gave you an correct information ..
[09:25] <wedo> DasEi, I will try it now
[09:26] <FireCrotch> theadmin: sudo apt-get install phpmyadmin   is all you need to do
[09:26] <DasEi> wedo: sudo fdisk -l to list your partitioons, figure out /dev for swap ..
[09:26] <xumuk> hipitihop, is there xorg on ssh?
[09:26] <theadmin> FireCrotch: Well... wow.
[09:26] <abhinav> AbortD: Depends on the dependencies. for amarok, it got some stuff like kde libs, etc. but not the desktop environment itself.
[09:27] <karmickola> can anyone tell me how to upgrade to ubuntu 10.04
[09:27] <abhinav> !lucid | karmickola
[09:27] <theadmin> karmickola: It's in a beta stage, you sure you want it?
[09:27]  * sunkoo smile
[09:27] <ardchoille> !upgrade | karmickola
[09:27] <DasEi> karmickola: not at all now, fresh install , not released yet >> #ubuntu+1
[09:27] <AbortD> abhinav, if i can setup kde to look like gnome i would get it :P
[09:27] <theadmin> karmickola: If so, there is some flag for update manager to update to the development version, read the manpage.
[09:27] <theadmin> DasEi: ^
[09:27] <FireCrotch> karmickola: if you have to ask how to upgrade to Lucid beta, then it's probably not a good idea for you to do so
[09:28] <Gorlist> Good morning, ubuntu 9.10, im not getting any audio out of my front jack to the headphones, done a search and turned up a thread where they disable Independent HP un 9.04 - however the menu they suggest no longer exsists in 9.10. Anyhelp!
[09:28] <karmickola> thanks!
[09:28] <ardchoille> FireCrotch: good point
[09:28] <Ubuntuslav> hi
[09:28] <karmickola> hi ubuntuslav
[09:28] <hoban> hello everyone. I'm looking for recommendations for a SIP client compatible with an asterisk server. I have currently tried both twinkle and qutecom and while each works, they consume 100% cpu after a fairly lengthy call ( I need to make  calls that are 8+ hours long)
[09:29] <DasEi> hoban: ekiga or skype
[09:29] <ranjan> gorlist:: i hope you need to make some change in ::; sound preferance ..
[09:29] <Uunreal> Does anyone know how to start up the PulseAudio daemon? I'm trying so I can follow along with the official configuration guide on their website. But I keep getting the error message saying that I can't start it up and get into it's console because it's already running. Unless I run it as superuser, but I want to configure only my limited user account's PA settings, not the whole computer.
[09:29] <Gorlist> ranjan, volumecontrol->preferences, there is Independent HP
[09:30] <xumuk> theadmin, try to log in phpmyadmin as root with pass u assigned while installing lamp...
[09:30] <hoban> DasEi, thanks, I don't think skype is capable of connecting to an asterisk server and last I checked ekiga didn't work either. I'll look again though
[09:30] <theadmin> Uunreal: Stop the global daemon first. (i think something like "sudo /etc/init.d/pulseaudio stop"
[09:30] <theadmin> xumuk: I don't have any problem with logging in. I just wanted to know how to install it, solved already
[09:30] <ranjan> gorlist:: may I can know .. which version of ubuntu are you using :: is it 9.10
[09:30] <wedo> DasEi, fstab has the same uuid of the blkid
[09:30] <ranjan> or 9.04
[09:30] <Gorlist> ranjan, 9.10
[09:30] <DasEi> hoban: I'm quite sure I read a howto on it, ekiga == asterisk
[09:30] <Uunreal> theadmin: I'll try that, I was trying to stop the global daemon by killing PA's PID.
[09:31] <DasEi> wedo: after resizing swap ?
[09:31] <Gorlist> ranjan, I took a quick look in alsamixer, and couldn't find anything related to the problem they where suggesting
[09:31] <wedo> yes
[09:31] <xumuk> theadmin, Install what? if u can log in it's allready installed)
[09:31] <hoban> DasEi, great. I'll look around for something similar. Thank you.
[09:31] <karmickola> hi ubuntuslav
[09:32] <ranjan> Gorlist :: ok .. please have an right click on speaker icon on notification are.. and open sound properties
[09:32] <DasEi> wedo: then sth. went wrong, if you resize a partition, it's uuid will change
[09:32] <theadmin> xumuk: XD Well, it was not installed. I could log in on my other machine, where it was preinstalled or smth
[09:32] <Gorlist> ranjan, done
[09:32] <ranjan> Gorlist :: please go on to the output tab ..
[09:32] <DasEi> wedo: you did the resize from a live cd btw. least unmounted swap for resizing ?
[09:32] <wedo> the capacity in the fdisk -l appears correctly
[09:32] <karmickola> ubuntuslav-which os r u using
[09:33] <Gorlist> ranjan, yep (ive already tried changing the connector)
[09:33] <xumuk> theadmin, what's the task now?
[09:33] <theadmin> DasEi: What!! You mean if i resize a partition using a livecd my fstab will be messed up?
[09:33] <theadmin> xumuk: Nothing, thanks for help but i solved stuff already
[09:33] <DasEi> theadmin: if it's uuid, as is per default, yes
[09:33] <wedo> DasEi, I resized it by Gparted and I did unmounted it before resizing
[09:33] <xumuk> theadmin, ok
[09:33] <Thijx> lets dance.
[09:34] <theadmin> DasEi: ...That's NOT user-friendly. How on earth can i get it back to normal after resizing?
[09:34] <Gorlist> ranjan, ah its working!
[09:34] <Gorlist> ranjan, thanks
[09:34] <ranjan> Gorlist :: it does't help in fixing your problem ..  this was the problem once with my set up on computer by changing it's seting .. it help me in fixing it ..
[09:34] <DasEi> !blkid > theadmin
[09:34] <Gorlist> ranjan, rgr
[09:34] <Gorlist> all working now :)
[09:34] <ranjan> hope have some time and play with all the possible combination ..
[09:35] <ranjan> ok great
[09:35] <ranjan> :)
[09:35] <theadmin> DasEi: And how can i do that, if i wouldn't be able to boot after resizing (it won't mount properly...)
[09:35] <karmickola> can anyone tell me whick one is better compiz or compiz fusion
[09:35] <llutz> theadmin: use a live-cd too
[09:35] <theadmin> karmickola: Fusion is a dead project, afaik, no?
[09:35] <xumuk> karmickola, better for what? try both...
[09:36] <DasEi> wedo: that's strange, least if fstab is equal to blkid, you're fine, try a reboot, worst thing is a stuck > live-cd, comment swap, sys will start without swap for debugging then
[09:36] <llutz> theadmin: or edit grub-options at boottime to boot once
[09:36] <ranjan> theadmin :: are you going to resize /
[09:36] <theadmin> ranjan: No, just wondering what would happen if i were
[09:37] <karmickola> xumuk  - do u know the place from where i can download drivers
[09:37] <Mowee> Hi o/
[09:37] <DasEi> theadmin: as said, call blkid and re-check fstab
[09:37] <theadmin> DasEi: Well, thanks.
[09:37] <ranjan> theadmin :: not an problem .. just try to update the fstab entry accordingly .. but try to make all the backup before .. making such attemp..
[09:38] <llutz> wedo: "sudo swapoff -a" then" sudo mkswap /dev/sdXY" change /etc/fstab to new UUID and "sudo swapon -a"
[09:38] <xumuk> karmickola, for what?
[09:39] <karmickola> video drivers
[09:39] <ranjan> theadmin :: and I'll never sugest any body to resize / directory .. or ext3/4 part ..
[09:39] <wedo> DasEi, can u check that plz http://pastebin.com/JCUf67ER
[09:39] <llutz> wedo: if you use hibernation, also change UUID in /etc/initramfs-tools/conf.d/resume
[09:40] <wedo> llutz, XY means the partition ID?
[09:40] <llutz> wedo: yes
[09:40] <llutz> wedo: /dev/sda7    according to your paste
[09:40] <wedo> llutz, yes it is
[09:41] <DasEi> wedo: looks correct so far, strange if resising worked and you called no other function
[09:41] <wedo> llutz, i will try the commands now
[09:42] <DasEi> wedo: you wouldn't have been able to resize, unles unmmounted, afterwards it'll have changed uuid at re-mount
[09:42] <wedo> Dasda, the System monitor shows the old capacity and actually I do not know if the system works with new capacity or uses only the capacity shown in the system monitor
[09:43] <DasEi> wedo: see, resizing wasn't done then, there you go, got to do it again
[09:43] <wedo> DasEi, the System monitor shows the old capacity and actually I do not know if the system works with new capacity or uses only the capacity shown in the system monitor
[09:43] <Life_Support> hey ppl  I have big problem with my ubuntu after trying to update to 2.6.31-20-generic
[09:43] <DasEi> wedo: see, resizing wasn't done then, there you go, got to do it again
[09:43] <DasEi> wedo: sudo gparted
[09:43] <wedo> DasEi, GParted show that the swap is at the new size
[09:43] <llutz> wedo: vmstat -s|grep "swap cache"           to check size
[09:44] <Life_Support> now  I'm unable to start my PC even with the ubuntu CD
[09:44] <rameshwor> how do i setup my screen resoluton from a configuration text file.. ? i just forgot that ..
[09:44] <Life_Support> always freezes
[09:44] <ranjan> one thing I would like to ask you all as I don't kill my laptop I mean I dont use to shutdown where as i use to hibernate it .. is there any option .. that can make this feature a bit faster .... thanks in advance
[09:44] <ddlo> FloodBot4 - JI
[09:44] <ddlo> FloodBot4 - HI
[09:45] <theadmin> ranjan: more swap - faster hibernation
[09:45] <wedo> llutz, its 183312 K swap cache
[09:45] <llutz> wedo:  as it should be?
[09:45] <Jun1us> Life_Support: what happens when you try and boot?
[09:45] <Life_Support> shows only blinking cursor
[09:46] <wedo> llutz: no the new size was 1.4 gb
[09:46] <theadmin> Life_Support: Wait, if it doesn't boot even from CD it means it's some problem with hard drive or other hardware. Or a bad cd, but... can you boot _anything_ at all?
[09:46] <Uunreal> theadmin: I tried "/etc/init.d/pulseaudio stop". It says the it's stopping the daemon. But even after that I'll go to get into the PA console and I'll get the same error message about the daemon already running.
[09:46] <rameshwor> setting screen resolution .?
[09:47] <theadmin> Uunreal: Uh, did you run that with sudo? Because otherwise it will stop your user daemon.
[09:47] <llutz> wedo: vmstat -s|grep "total swap"
[09:47] <Jun1us> rameshwor: system -> preferences -> screen resolution
[09:47] <ranjan> theadmin:: I lapi is having 1gibs of ram and I have assinged 2gibs for swap .. is this enougf .. for faster hibernation .. or I need to add more .. for this ..
[09:47] <Life_Support> theadmin until 2 days ago I was abel to run 2.6.31-19-generic with edit line now it freezes too
[09:47] <rameshwor> Jun1us: : from command line ??
[09:47] <theadmin> ranjan: Should be more then enough
[09:48] <wedo> llutz,  417648 K total swap (the old size)
[09:48] <ranjan> do you have any idea regarding ramfs .. what is it ?? any idea
[09:48] <karmic> hi ddlo
[09:48] <llutz> wedo: after mkswap.... ?
[09:48] <dudeface> hi all
[09:48] <ddlo> hi karmic
[09:48] <karmic> dudeface - hi from me
[09:49] <dudeface> hi
[09:49] <ddlo> hi dude face
[09:49] <dudeface> is this where i talk about coding?
[09:49] <dudeface> i am keen to help the project
[09:49] <rsk> dudeface what kind of coding
[09:49] <Uunreal> theadmin: I'm running Debian (don't have sudo setup currently) and I only want to stop my user daemon. Because when editing PA it recommends only editing my limited user settings, not doing anything system-wide. But just for the heck of it, I logged in as superuser, ran the same command, logged out, and tried to enter the PA daemon as limited user and I got the same message. I could just edit the whole thing as superuser as I wanted.
[09:49] <Uunreal> But from what I've read that's not recommended.
[09:49] <karmic> dudeface - do u pogram in c?
[09:50] <utvkl> for simple remote webconfig, like apache and users, is there a (non) commercial alternativ to webmin?
[09:50] <dudeface> well, i have recently sold my business, and am getting bored, so i am keen to code for ubuntu full time
[09:50] <rsk> dudeface there's nothing stopping you.
[09:50] <Jun1us> rameshwor: sorry were you asking a question or responding to another one, its been a long day
[09:50] <karmic> dudeface - do u pogram in c?
[09:50] <dudeface> and what i want is a better end user experience, and was wondering weather to start here, or to talk to the gnome guys
[09:51]  * xumuk apt-get moo
[09:51] <dudeface>  i program in c and assembly
[09:51] <rsk> dudeface send patches to the gnome ml
[09:51] <xumuk>  _____________
[09:51] <xumuk>  < apt-get moo >
[09:51] <xumuk>   -------------
[09:51] <xumuk>          \   ^__^
[09:51] <xumuk>           \  (oo)\_______
[09:51] <FloodBot4> xumuk: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[09:51] <karmic> dudeface - thats cool
[09:51] <dudeface> but i want to present myself as a project manger for something
[09:51] <rsk> dudeface why?
[09:51] <dudeface> i think i can be better than a coder
[09:51] <dudeface> well, i work for xbmc
[09:52] <rsk> dudeface the only project manager you can be is if you fork a project and be your own manager
[09:52] <ranjan> xumuk :: how did you make this type of entry .. are you an programmer ..
[09:52] <dudeface> and it has to be one of the best open sourse projects right now
[09:52] <rsk> dudeface you can't just sai"hey guys i wanna be your project manager"
[09:52] <dudeface> i think i can improve gtk a large ammount
[09:52] <wedo> llutz, when I do mkswap it says "/dev/sda7: Device or resource busy"
[09:52] <rsk> dudeface so send patched to gtk then
[09:52] <rsk> patches*
[09:52] <dudeface> well if i am not wanted i will just go work for bsd
[09:52] <llutz> wedo: "sudo swapoff -a" then" sudo mkswap /dev/sdXY" change /etc/fstab to new UUID and "sudo swapon -a"
[09:52] <xumuk> Ranakah, I'd like to be IT))
[09:53] <llutz> wedo: you have to switch swap off before
[09:53] <wedo> llutz, i made swapoff and it said "Killed"
[09:53] <dudeface> ubuntu obviously has a large hand in gnome, was just wondering if anyone knew what channel to join
[09:53] <xumuk> ranjan, I'd like to be IT))
[09:53] <wedo> llutz, and when i tried mkswap it said "/dev/sda7: Device or resource busy"
[09:54] <rsk> dudeface there's no channel where you can be a project manager for a day no
[09:54] <dudeface> your loss, see ya
[09:54] <ranjan> xumuk :: great
[09:55] <ranjan> xumuk :: can I send you Pm
[09:55] <llutz> wedo: sudo swapoff -v /dev/sda7
[09:55] <rsk> what a troll
[09:55] <wedo> llutz, i do swapoff again now
[09:55] <xumuk> ranjan, it's just ASCII graphic)
[09:55] <rameshwor> Jun1us: sorry i was late too.. anyway i was asking how to configure screen resolution through command line .. editing a text file. don't know which one ..
[09:57] <wedo> llutz, the same result
[09:57] <mobius2> greetings ;]
[09:58] <Nirkus> hi! anyone tried ubuntu karmic with the new intel core i5/i7 integrated GPUs yet?
[09:58] <frff> yeah
[09:58] <Nirkus> frff: @me? :)
[09:58] <llutz> wedo: that's odd, last idea: use a live-cd for mkswap
[10:00] <wedo> llutz, I cannot use cd on my pc, is there any way
[10:00] <mohsin1> hello, I was part of a LAN but I installed a wireless router and setup a small network of three computers at my home. How can I now access the external server?
[10:00] <Ubuntuslav> net install
[10:00] <mobius2> I'm  having an issue with a new game I've installed.  The game runs fine, except that when  I exit the game,  my primary display ( laptop native LCD )  gets "turned off"  and I have to manually go into the display settings and  turn it back on. Not a big deal but annoying....
[10:00] <llutz> wedo: disable swap in /etc/fstab, reboot, try again
[10:00] <Spyzer> Hi is there any GSOC mentor available here. I am a student aspiring for GSOC 2010 and wish to discuss a project idea with a mentor.
[10:01] <wedo> ok
[10:01] <mobius2> perhaps a script  for turning it back on  which could reside on the display  that is left on?
[10:01] <wedo> brb
[10:01] <kalesian> mohsin1: please explain further what you are trying to do
[10:01] <bovv> I suddenly started having trouble with my headphone jack... inserting headphones does not mute the speakers.  Any fixes?  (Ubuntu 9.10 NBR, EeePC 1005HA)
[10:01] <Spyzer> ubuntu-soc is supposed to be the chat area for GSOC purposes but it ain't seems to be running.
[10:02] <anonyme> hi
[10:03] <xig> once installed sth like linux-backports-modules-karmic, how can one ensure the new, backported module is loaded in the future, and not the old one?
[10:03] <bovv> hi
[10:03] <kalesian> mohsin1: what external server?
[10:03] <mobius2> bovv,  could you paste output of dmesg to pastebin?
[10:03] <bovv> Ah... I did install the "backports" package as well (that's how I got mic working for Skype)
[10:04] <bovv> mobius2: OK... give me a sec.
[10:04] <mobius2> bovv,  what happens when you  use the rear port?
[10:04] <bovv> mobius2: "rear port"?  what's that?
[10:04] <Spyzer> If there is any GSOC mentor available kindly respond back.
[10:04] <mobius2> bovv,  * typo *
[10:04] <mobius2> is what that is ^_^
[10:05] <ranjan> does any body know how to share internet with windows macine .. from ubuntu ..
[10:05] <mobius2> yes paste output of dmesg   for sound chip id
[10:05] <bovv> k
[10:05] <xig> i installed linux-backports-modules-karmic to get a different version of the ath9k module, but i dont know which one gets loaded now. is there anything to configure after installing that package?
[10:05] <theadmin> xig: Usually it autoconfigures
[10:06] <bovv> mobius: how do I identify the "sound section" of the dmesg?
[10:07] <mobius2> bovv one moment
[10:07] <theadmin> I seriously hope Ubuntu will some day stop messing Firefox
[10:07] <xig> are the backported modules installed in /lib/modules/<version>/updates ?
[10:07] <mobius2> b one moment
[10:07] <xumuk> bovv, dmesg | grep -i sound section
[10:08] <bovv> Neither the words "sound" nor "audio" appear in my dmesg.
[10:08] <bovv> dmesg | egrep -i "(sound|audio)"
[10:08] <DarthPuff> hello
[10:08] <theadmin> whoz egrep, bovv
[10:08] <mobius2> bovv,  if you could paste the output of the dmesg to pastebin  that would be great
[10:09] <theadmin> DarthPuff: Hi. If you have any Ubuntu questions, ask them straight away
[10:09] <sami> Hi, is there an easy way to upgrade kernel from 2.6.27 to 2.6.32 on hardy?
[10:09] <mohsin1> kalesian: It is a windows server. Actually I am part of a LAN
[10:09] <DarthPuff> is there a command i can run to rename a bunch of folders? they are all named "blah rar" and i would like them to be named just "blah".
[10:09] <bovv> mobius2: ok
[10:09] <Slart> DarthPuff: yes.. there is a multi-rename tool.. don't remember the name though.. hang on.. let me search a bit
[10:10] <DarthPuff> Slart: thank you
[10:10] <eremite> sami: I suggest you just upgrade the distro.
[10:10] <llutz> DarthPuff: use "rename"
[10:10] <progre55> hi people! how do you cut the first two and the last two letters from each line from a file?
[10:10] <psycho_oreos> there's a command line based program called rename which can accept regexp inputs
[10:10] <sami> eremite: Yes, i'm thinking about it.
[10:10] <eremite> DarthPuff: there's one in the repos called something like pyRename or soemthing
[10:10] <sami> eremite: But i need to run an LTS.
[10:11] <eremite> sami: in 1 month Lucid will be released.
[10:11] <pirx> hi! when i use 'dpkg --get-selections', what does it mean when it says "deinstall" next to a package? the package _is_ installed, and running (mysql)
[10:11] <ranjan> sami :: please wait for few more days ..till the relese of 10.4 it's an lts
[10:11] <sami> eremite: Ok. But are there no prepacked debs for 2.6.32?
[10:11] <eremite> DarthPuff: search in the repos for  pyRenamer.
[10:11] <Slart> DarthPuff: looks like you've got plenty of answers already.. I think the one I was looking for was .. "rename"
[10:11] <DarthPuff> thanks guys
[10:11] <Elite1> hi does anyone here know if realtek 10/100 and realtek wireles n networking is suported out of the box with ubuntu 9.10 32-bit ?
[10:11] <sami> I don't have time to pack one myself and it's a large scale installation
[10:12] <bovv> mobius2: here it is: http://pastebin.com/vvNxcvsN
[10:12] <mobius2> has anyone installed the many different alawar games into ubuntu via wine or crossover?
[10:12] <mobius2> bovv,  ok I will scope it out
[10:12] <bovv> mobius2: thanks. :-)
[10:13] <sporedi> how do i change ip .i just want to change gw and want to keep ip address same
[10:13] <ranjan> ok every body it's enough for the day
[10:13] <ranjan> sonn i'll be bac .. thank you every body
[10:13] <mobius2> bovv,  a mini laptop?
[10:14] <bovv> mobius2: yes... EeePC 1005HA
[10:14] <mobius2> bovv, aight
[10:14] <mobius2> bovv,  have you rtied more than  the single set of headphones / speaker devices?
[10:15] <mobius2> bovv,  rtied= tried
[10:15] <llutz> sporedi: sudo route del default gw && sudo route add default gw ip.of.your.newgateway
[10:15] <bovv> yup
[10:15] <bovv> headphones, external speakers.
[10:15] <sporedi> ok thanks
[10:15] <sami> How is it to upgrade from "updatemanager -d" 8.04 -> 10.04 beta 1?
[10:15] <mobius2> bovv,  I hate to ask you this,  but does it work in "other" operating systems?
[10:15] <mobius2> ^_^
[10:15] <bovv> mobius2: headphones and external speakers all work, *but* the built in speakers wont turn off.
[10:16] <mobius2> bovv,  I see
[10:16] <mobius2> bovv,  and do those problems exist in both linux as well as Windows?
[10:16] <bovv> mobius2: *cough*... it did for the 15 minutes after I bought it... then I installed Linux.
[10:16] <mobius2> bovv,  I see ^_^
[10:17] <bovv> Oh... I don't have Windows now.
[10:17] <rsk> sami first to 8.10 then 9.04 then 9.10 then to 10.04 beta
[10:17] <eremite> If you have the Windows virus, Linux is the best cure.
[10:17] <bovv> Oh... I installed the "backports" package to get the mic working... let's Skype work.
[10:17] <mobius2> bovv,  I take it you have tried reloading your alsa driver with  <alsa reload>
[10:18] <bovv> mobius2: didn't.  Didn't know that could be done.
[10:18] <bovv> mobius2: should I sudo it or just as my id?
[10:18] <mobius2> bovv,  try that,  but first stop any apps that are using the  sound,  or  at least mute sounds in those apps
[10:19] <mobius2> bovv,  I don't think you have to  to do it in SU
[10:19] <VirusTB> when is linuc lycid available?
[10:19] <mobius2> it will let you know
[10:19] <rsk> VirusTB when it's released
[10:19] <VirusTB> rsk n tat is?
[10:19] <VirusTB> that
[10:19] <theadmin> VirusTB: 29th April 2010
[10:19] <rsk> VirusTB we don't know untill it's out
[10:19] <theadmin> rsk: Not right, Ubuntu always has a release date predefined
[10:20] <VirusTB> theadmin<<  deffinite release ?
[10:20] <rsk> theadmin but it usually misses it
[10:20] <theadmin> VirusTB: It's between 28th and 29th, as far as i'm aware
[10:20] <mobius2> alawar games "Penguins Journey" has got my mind hooked
[10:21] <mobius2> is it slightly ironic that "frozen bubble" seems to do just that every other time I launch the game?
[10:21] <mobius2> the game freezes alot
[10:22] <bovv> mobius2: I needed to sudo due to a permission thing (/var/run/alsa).... but after the reload it still is the same.
[10:22] <mobius2> bovv,  ok and sorry about the permissions issue
[10:22] <bovv> mobius2: no worries.
[10:22] <mobius2> bovv,  well as you stated it's definately a software issue
[10:23] <bovv> This worked up until last night.
[10:23] <mobius2> bovv,  I run an older M-275 gateway tablet pc  it's abeast all with legacy  integration  devices   quite lovely for linux really
[10:23] <nmvictor> which package provides gtk dev file? i need to install it in my ppc
[10:23] <lukey> Hi folks, I went to print out a document this morning and cupsd tells me "libcupsmime.so.1: cannot open shared object file: No such file or directory" however "ldconfig -v | grep libcupsmime" tells me "libcupsmime.so.1 -> libcupsmime.so.1"... I'm a little confused :\
[10:23] <bovv> I installed backports last week, but did not notice anything.  In fact, I used headphones right up until before it went flakey.
[10:24] <mobius2> bovv,  so this problem has recently manifested AFTER it had previously worked in linux?
[10:24] <bovv> mobius2: I agree, it feels like a software issue.  Something... a flag somewhere... changed.
[10:25] <bovv> mobius2: yes.
[10:25] <mobius2> bovv,  I would suggest you investigate what has been installed since the problem manifested ,  what updates etc...
[10:25] <lukey> It seems the library is present but somehow cupsd does not see it :( If anyone has any ideas about this please let me know :)
[10:26] <mobius2> bovv,  you might be able to undo part or all of whatever is causing it
[10:26] <meowbuntu> hi how to checksum an iso from terminal
[10:26] <mobius2> bovv,  plebian  but effective
[10:26] <Slart> !md5
[10:26] <vbartels> hi there, any ideas why xrandr/grandr isnt workinh at all on my system? 9.10
[10:26] <Slart> meowbuntu: see ubottus link a couple of lines up
[10:27] <bovv> mobius2: how do I get the "install/update" log?
[10:27] <lukey> vbartels, what happens when you type xrandr on a terminal?
[10:27] <bovv> (sorry if I seem green, I spent my life on an RPM based system and am still new to DEB)
[10:27] <vbartels> I see an overview with 3 resolutions (all to low)
[10:27] <mobius2> bovv,  I would point you here
[10:27] <mobius2> http://ubuntuforums.org/showthread.php?t=375492
[10:27] <nmvictor> is it python-gtk2-dev, the package that provides dev file for GTK, i doubt, will someone please help
[10:27] <meowbuntu> Slart in futur did you know you can do this !(ubottu comand) | (nickname)
[10:28] <bovv> thanks
[10:28] <bovv> mobius2: thanks
[10:28] <Slart> meowbuntu: yup
[10:28] <meowbuntu> !help | Slart
[10:28] <meowbuntu> lol ok
[10:28] <lukey> vbartels, if you go into "system > preferences > display" does that screen allow you to rotate the screen? If not it seems that your Virtual Resolution may be too low
[10:29] <vbartels> lukey: rotation has only "normal" as entry
[10:29] <lukey> vbartels, You might have to add an entry into the "Screen" section of your /etc/X11/xorg.conf, join #pastebin and I will put mine there
[10:30] <VirusTB> the tx ok
[10:30] <mobius2> bovv,  you can type   <update-manager> at terminal  and that will invoke the  you got it  the update manager
[10:31] <mobius2> bovv,  now to see about UN-doing crap
[10:31] <supintu> salve
[10:32] <theadmin> ...lol do we have latin support?
[10:32] <mobius2> loooool
[10:33] <wedo> hello again
[10:34] <mobius2> well ,  does anybody know how to uninstall system updates?
[10:34] <lao5> .
[10:34] <mobius2> in the groups that they were installed BY the manager in ?
[10:34] <psycho_oreos> mobius2, I don't think that is a possible option
[10:34] <mobius2> jeese I find that hard to believe
[10:35] <wedo> DasEi, the swap size problem solved, I disabled it on the fstab then restarted then i make mkswap and everything is going ok now
[10:35] <wedo> thank you all
[10:35] <Gnea> mobius2: why do you think it's hard to believe?
[10:35] <mobius2> that the updates manager would not have a reverse gear
[10:36] <theadmin> mobius2: find / -exec grep 'hard to believe' \; :D
[10:36] <mobius2> thats weak
[10:36] <DasEi> !yay | wedo
[10:36] <Gnea> mobius2: judging it as such doesn't really solve your problem,does it?
[10:36] <wedo> thank you ubottu
[10:36] <mobius2> suggest.......  he invoke an earlier saved image
[10:36] <theadmin> wedo: Ubottu is a bot
[10:36] <mobius2> Gnea,  you got that right
[10:36] <Gnea> so why judge it?
[10:37] <theadmin> Can i search for something in manpage?
[10:37] <mobius2> judgement=  maybe someone will FIX it
[10:37] <Gnea> theadmin: yeah, use /
[10:37] <lukey> Hi folks, does anyone have an idea why cups might not be able to link to a library that is there? e.g. "ldd /usr/sbin/cupsd | grep mime" = "libcupsmime.so.1 => not found"
[10:37] <theadmin> Gnea: Wow
[10:37] <Gnea> mobius2: this is open source software. if you want it fixed, fix it yourself or file a proper bug report.
[10:37] <wedo> theadmin, :)
[10:38] <lukey> Just wanted to print something off this morning but this has hit me in the face like a brick wall... Google has not been helpful tho :(
[10:38] <mobius2> Gnea, thanks for that
[10:38] <mobius2> really
[10:38] <mobius2> thank you
[10:38] <Gnea> mobius2: judging it only makes *you* look weak. pretty sure you don't want that.
[10:38] <mobius2> Gnea,  thanks for that
[10:38] <mobius2> really
[10:38] <wedo> could i determine which process can use the ram and which can use the swap?
[10:38] <mobius2> thanks
[10:38] <Gnea> mobius2: feel free to drop the attitude while you're at it
[10:38] <mobius2> Thanks for that Gnea
[10:38] <mobius2> really
[10:39] <mobius2> thanks
[10:39] <Gnea> !attitude | mobius2
[10:39] <mobius2> thanks for the string of insults
[10:39] <mobius2> I really appreciate it
[10:39] <Gnea> you get what you give
[10:39] <Gnea> how it works
[10:39] <erUSUL> wedo: no the kernel decides that
[10:39] <mobius2> I dont recall insulting anyone in here
[10:39] <mobius2> but I do recall you being a prick
[10:39] <mobius2> so fuck off
[10:40] <bovv> holy what the fuck... I go away for a few minutes and it's like Zardoz is falling here.
[10:40] <wedo> thank u erUSUL
[10:40] <elky> mobius2, stop that.
[10:40] <theadmin> Can i make find NOT print errors to stdout? I want to find a certain file, don't have locate installed so i do "find / -iname 'somename'", and get a ton of permission denied errors
[10:40] <Gnea> mobius2: I'm sorry that you feel that way.
[10:40] <mobius2> Gnea go help someone and stop wasting time
[10:40] <Slart> theadmin: are you sure it's printing to stdout? not stderr?
[10:41] <theadmin> Slart: Well, point is it prints to the terminal
[10:41] <bovv> theadmin: yes... like this: find / -name "somename" 2>/dev/null
[10:41] <Slart> theadmin: you could try redirecting stderr to /dev/null and see if it goes away
[10:41] <bovv> theadmin: it redirects all stderr to /dev/null. :-)
[10:41] <Slart> theadmin: what bovv said =)
[10:41] <theadmin> bovv: Wow. Cool, works.
[10:42] <bovv> theadmin: your welcome. :-)
[10:42] <fingolfin> thank you
[10:44] <theadmin> but, bovv, what on earth is "2"?!
[10:46] <bovv> theadmin: "2>" means stderr.
[10:47] <os2mac> bovv:  tee 2>&1 error.out :)
[10:47] <bovv> theadmin: Another problem some people have is that they want to grep ALL output from a command (both stdout and stderr)... that solution looks like"command 2>&1".
[10:47] <ranjan> how to copy files over network??
[10:48] <erUSUL> ranjan: samba? nfs?
[10:48] <Slart> ranjan: ftp, scp, samba, nfs.. lots of options
[10:48] <ranjan> erUSUL, actually i want the fastest method
[10:48] <Slart> ranjan: rsync perhaps?
[10:48] <os2mac> erUSUL: lets not forget rsync or rdist.
[10:48] <ranjan> Slart, erUSUL the problem is that the contents are too small and it takes a lot time using scp
[10:49] <erUSUL> ranjan: tar them up before sending them ?
[10:49] <ranjan> erUSUL, taring also very time consuming
[10:49] <os2mac> ranjan: or zip or compress.
[10:49] <ranjan> erUSUL, is there any tool like xcopy like mirroring?
[10:50] <erUSUL> ranjan: rsync as other have mentioned
[10:50] <os2mac> ranjan: that would be rsync or rdist.
[10:50]  * lukey reboots to yukky windows 7 so he can print :\
[10:50] <ranjan> os2mac, is rsync faster than scp??
[10:51] <erUSUL> ranjan: also tar without compression is not that bad even gz (you will be limited by disk i/o and not by cpu expended in gzipping)
[10:51] <ranjan> os2mac, can you please provide an example how to copy files using rsync
[10:51] <ranjan> erUSUL, ok thats good.
[10:51] <os2mac> ranjan: ideally what you would do is setup identical file structures on both boxen and use Rsync... the difference with rsync is that it will only copy files that have changed.
[10:51] <os2mac> ranjan... your best bet is to man rsync and start from there I am sure they give several examples.
[10:52] <ranjan> os2mac, ok..let me try
[10:52] <ranjan> os2mac, is Rsync and rsync different
[10:52] <os2mac> no.
[10:52] <ManDay> Guys, I need ECLIPSE but as LIGHTWEIGT as possible - how to do that?
[10:52] <os2mac> not that I am aware.
[10:52] <ManDay> can i use the repos for that or will they install all kinda stuff that i dont want
[10:53] <TommoPuppy> hey, i'm trying to install Ubuntu 9.10 on my craptop and, well, it's not installing :P
[10:53] <TommoPuppy> it can't do anything to the hard drive
[10:53] <TommoPuppy> it says, like, it can't use the volumes
[10:53] <FireCrotch> TommoPuppy: you're going to have to be a little more specific than that
[10:54] <TommoPuppy> even though i've installed 5.04 on it before
[10:54] <TommoPuppy> i'm trying to
[10:54] <TommoPuppy> but it's really just saying "can not use this volume" or something to that effect
[10:54] <FireCrotch> Exact error messages are helpful :)
[10:54] <TommoPuppy> ugh i've gone beyond that to try something else now so i forget what the error message said ;~;
[10:54] <TommoPuppy> it's... doing something, but i don't know if it's managed to get past that nd start installing it
[10:55] <TommoPuppy> or if it's just running off the liveCD
[10:55] <TommoPuppy> give me a second while i sort this out ^^;
[10:56] <vixus> Hmm, had a weird issue with my computer last night. After a BIOS update everything was working great off a LiveCD (detected my graphics card and everything) until I tried installing the OS. Then the system froze when it reached the partitioner. I rebooted and the liveCD menu had screwed up, bringing up dialog boxes whenever I chose an item but not executing them.
[10:57] <commisky> lol
[10:57] <vixus> these freezes had been happening far more frequently before the update and I was amazed that ubuntu worked at all :p
[10:57] <commisky> fuck
[10:57] <Seeker`> !language | commisky
[10:57] <knittl> hi
[10:57] <commisky> oh srry
[10:58] <knittl> why does bash' autocompletion in ubuntu issue dns-requests wiht rsync?
[10:58] <knittl> i only see errors and it's damn slow
[10:59] <Q_Continuum> Need to install Ubuntu on desktop, don't have a free flash drive and cannot find blank CDs.  It has Windows 7 on it now, how easy is it to set up a netboot environment to just kick off over the network, no boot CD etc?
[11:00] <erUSUL> knittl: to try to autocomplete host names ?? (that's what i can think of anyway)
[11:00] <Q_Continuum> crud, I have to take out the existing DHCP server. *sigh*
[11:00] <Q_Continuum> Nevermind.
[11:00] <knittl> erUSUL: yes, but i don't want it
[11:00] <Q_Continuum> I guess I copy the contents off an 8GB flash drive...
[11:00] <knittl> and it only displays error messages and is so slow
[11:00]  * Q_Continuum makes note to buy a pile of 1-2GB drives next time he's in town...
[11:00] <knittl> it's filenames i want to complete
[11:00] <erUSUL> knittl: really dunno how to tweak bash completion sorry
[11:00] <FireCrotch> Q_Continuum: you only have to disable your existing dhcp server temporarily. or set it to do the netboot for you
[11:01] <Q_Continuum> FireCrotch, yeah, that means setting one up on this laptop and it would break itself.  Sounds like alot of work, lol
[11:01] <Q_Continuum> Or doing it via crossover, since this lappy is up on wireless.
[11:01] <os2mac> anyone what is the linux equivalent of Jumpstart?
[11:02] <Q_Continuum> What is Jumpstart?
[11:02] <TommoPuppy> awesome education program for children
[11:02] <geirha> os2mac: kickstart
[11:02] <TommoPuppy> i had 1st grade back in the day. it was sweet.
[11:02] <TommoPuppy> so many memories
[11:02] <TommoPuppy> of learning how to read
[11:02] <TommoPuppy> by myself
[11:02] <TommoPuppy> and the awesome redbook soundtrack
[11:03] <geirha> os2mac: Though Ubuntu has its own way ...
[11:03] <os2mac> http://en.wikipedia.org/wiki/Jumpstart_(Solaris)
[11:04] <erUSUL> !kickstar
[11:05] <erUSUL> !automate | os2mac
[11:05] <os2mac> couldn't he use that?
[11:06] <erUSUL> os2mac: who ? Q_Continuum ?
[11:06] <erUSUL> !install
[11:06] <os2mac> yup.
[11:06] <kalesian> !automate
[11:06] <erUSUL> os2mac: in the help pages there are methods of installing without cd or usb
[11:07] <Q_Continuum> erUSUL, can't find blank CDs, flash drives are all 8GB+ and full, so wanted to do a netboot.
[11:07] <Q_Continuum> Forgot all that was involved.
[11:07] <erUSUL> Q_Continuum: https://help.ubuntu.com/community/Installation
[11:07] <Q_Continuum> yeah.
[11:07] <erUSUL> Q_Continuum: https://help.ubuntu.com/community/Installation#Installation without a CD
[11:07] <Q_Continuum> netboot = lots of work (DHCP server, configuring TFTP, ugh)
[11:07] <Q_Continuum> tempted to just wait until I can spend $10 on another flash drive.
[11:08] <Q_Continuum> or just drive to Wal-Fart...lol
[11:09] <Q_Continuum> Hrm, are there any preconfigured VMs for netbooting?
[11:10] <os2mac> for which VM software?
[11:10] <Q_Continuum> I've got VirtualBox right now
[11:10] <Q_Continuum> (This machine already has Ubuntu on it, I want to dual-boot my gaming rig)
[11:10] <artypig78> hey does any1 know of a web program like mediafire which i can put on my server?
[11:11] <ManDay> Does anyone here know how GEANY - the editor works - Auto completion for c++ doesnt seem to work so well. If I type mystring.fin... it suggestss things like "finite" and stuff but not "find"
[11:11] <xumuk> Q_Continuum, !SSH
[11:11] <Q_Continuum> !ssh
[11:11] <airtonix> ManDay, doesnt autocomplete in geany only work on symbols already in your current document ?
[11:11] <Q_Continuum> I can't think of how SSH will make this easier.
[11:12] <Q_Continuum> I wanted to netboot it but that requires a fair bit of server config'ing
[11:12] <ManDay> airtonix, that would be very unfortunate. are you sure it doesnt autocomplete for included headers??
[11:12] <Q_Continuum> and me messing with router + modem plus local network interfaces.
[11:12] <airtonix> ManDay, i can't be sure. but it was my assumption
[11:12] <os2mac> http://virtualboximages.com/
[11:12] <xumuk> Q_Continuum, install VB on remote server and start it remotely by ssh
[11:13] <os2mac> http://virtualboxes.org/images/
[11:14] <ManDay> airtonix, well it suggests "finite" which isnt in my document either
[11:14] <Q_Continuum> xumuk, I have virtualbox on this machine (laptop, already running ubuntu) I want to install Ubuntu on the desktop to my right, over the network.  (wired would work, but it would be an "offline" connection unless I bothered to set up a proxy)
[11:14] <Q_Continuum> but its looking like that will be far too much work to be worthwhile
[11:14] <Q_Continuum> I may just drive over to Wal-mart and plunk the $10 for another USB stick
[11:15] <Ashok> hi all i forgot my laptops login password which i recently installed ubuntu 9.10 can some one tell me how to by pass it
[11:16] <DJones> !password | Ashok
[11:16] <Jaimie> http://ubuntuforums.org/archive/index.php/t-3609.html ashok
[11:16] <airtonix> ManDay, http://www.geany.org/manual/current/index.html#autocompletion
[11:18] <airtonix> ManDay, maybe there is a definition file somewhere that is used to generate the suggestions ?
[11:18] <ManDay> airtonix, i just got word from #geany that geany doesnt do that
[11:19] <ManDay> anyone happens to know a (lightweight) IDE which does autocompletion not just for the workds in the document but also for all headers?
[11:19] <zoug> ManDay: netbeans?
[11:20] <ManDay> not exactly lightweight, hm?
[11:20] <ManDay> :)
[11:20]  * airtonix chuckles
[11:20] <zoug> ManDay: yaa :)
[11:21] <zoug> ManDay: i want to know, if you find one..
[11:21] <toyman61> Karmic Koala: D-Link DWA-140 gets only 54 Mbps transfer rate. Do I have to recompile the driver, or is there another package I can use ?
[11:22]  * kalesian just took delivery of a really heavy computer.
[11:22] <seb__> hi people!
[11:23] <Pericius> my ubuntu just got updated and it now hangs up on grub sh
[11:23] <Ashok> ubottu: thanks
[11:23] <Pericius> installation is through wubi, updated daily
[11:23] <seb__> Do someone can help for a new install ?
[11:24] <ManDay> zoug, ok
[11:25] <Pericius> btw, i presume this is why ppl don't usually like linux
[11:25] <Pericius> i'm currently wasting manhours because i do regular and recommended updates... how great is that
[11:25] <ManDay> zoug, you might want to check out "codelite" - i just came across that in the arch thread and the website looks quite PROMISING!
[11:25] <ManDay> i ll try it
[11:25] <zoug> ManDay: alrity let me check
[11:26] <vixus> what does the yellow spiky icon with an exclamation mark in the systray mean?
[11:26] <ManDay> battery maybe?
[11:26] <ManDay> click it and see what happens!
[11:26] <DJones> vixus: Sounds like the Crash detected icon
[11:26] <vixus> it appeared during a freeze
[11:26] <vixus> so yep
[11:26] <Dr_Willis> I waste manhours doing updates on windows.. So i guess it all depends. But ive missed the Ubuntu related support question
[11:27] <vixus> couldn't click it :)
[11:27] <vixus> but what kind of crash? kernel?
[11:27] <elky> vixus, right-click?
[11:27] <vixus> everything froze! no mouse movement or anything
[11:27] <Pericius> Dr_Willis: updates on windows never crashed my os, iirc
[11:27] <Pericius> bah, nevermind that, anyone can help?
[11:27] <elky> vixus, ah, everything is still stuck?
[11:28] <Dr_Willis> Pericius:  ive had them crash it..
[11:28] <Dr_Willis>  But ive missed the Ubuntu related support question
[11:28] <vixus> elky, yeah this is related to my `motherboard adventures' :D
[11:29] <Pericius> Dr_Willis: :) anyways, did update just now, now it hangs on grub
[11:29] <sipior> Pericius: what exactly is the problem?
[11:29] <Pericius> i believe new kernel was updated
[11:29] <elky> vixus, if it's all still stuck, then it's a hard lock and is likely a kernel crash, yes.
[11:29] <ManDay> Does anyone know whether code::blocks offers autocompletion beyond one's documents??
[11:29] <znh> Hello. Are there any plans for releasing Firefox 3.6? It fixes a serious remote exploit bug.. My 9.10 only offers 3.5.8
[11:30] <vixus> elky, hmm, happened when the installer partitioner was loading.. any idea what this could mean?
[11:30] <mrenouf> I'm trying to give an arbitrary user permissions to modify NetworkManager *system* settings. I've tried all I could find in the policy file settings to assign permissions to the specific user, but I still get Insuffient Privileges
[11:30] <cdavis> Is there a file I can have in my ~ that will be use to launch different things at X startup?
[11:30] <Dr_Willis> !autostart | cdavis
[11:30] <eremite> cdavis: yes.  See above ^^
[11:30] <cdavis> I would prefer not use that gui though, it isn't reliable
[11:30] <Pericius> sipior: did update of kernek, it hangs on grub now
[11:31] <eremite> What isnt reliable?
[11:31] <Dr_Willis> cdavis:  thers an autostart directory also.
[11:31] <obscurant1st> is there anyway by which i can enable ahci mode? its not in my bois? or can i just check if its already enabled?
[11:31] <cdavis> the startup programs tab
[11:31] <eremite> cdavis: why is it not reliable?
[11:31] <elky> vixus, I really couldn't say, but if you have some funky partition types then it could be that, otherwise i'm at a loss.
[11:31] <cdavis> Dr_Willis: Where is that?
[11:31] <mrenouf> dbus.exceptions.DBusException: org.freedesktop.NetworkManagerSettings.System.NotPrivileged: Insufficient privileges.
[11:31] <erUSUL> obscurant1st: if you can it has to be in the system BIOS
[11:31] <Dr_Willis> cdavis:  it also depends on what desktop/window ,manager.. ive never had it be not reliuable
[11:31] <eremite> Dr_Willis: likewise.
[11:31] <Dr_Willis> cdavis:  in your home dir somewhere.. see the bots url above.
[11:31] <vixus> oh well..
[11:31] <elky> vixus, if it's a live system you won't get the logs either
[11:32] <obscurant1st> erUSUL, so can i update bios software from ubuntu?
[11:32] <vixus> nope :(
[11:32] <obscurant1st> there may be an updated bios!
[11:32] <vixus> elky, it also screwed up the liveCD menu when i rebooted
[11:32] <erUSUL> obscurant1st: you have to check in the motherboard site how can you upgrade bios
[11:32] <cdavis> eremite: I had a syndaemon link woring there with -i 2, I wanted to change to -i .75 but it would not save my edits. I removed it and added it again which worked for a while but now syndaemon isn't starting at all again
[11:32] <elky> vixus, all i can suggest if it happens continually is to have a terminal window open tailing the logs while the installer progresses
[11:32] <obscurant1st> erUSUL, actually i have a sony vaio laptop
[11:32] <obscurant1st> 1
[11:32] <erUSUL> obscurant1st: are you sure the chipsets supports ahci ???
[11:32] <vixus> elky, how do I do that?
[11:33] <obscurant1st> erUSUL, how can i know that?
[11:33] <erUSUL> obscurant1st: again manufacturer info.
[11:33] <elky> vixus, tail -f /var/log/messages
[11:33] <cdavis> Dr_Willis: that page is only talking about the Sessions method
[11:33] <vixus> ok thanks
[11:34] <vixus> so messages is the log to go with?
[11:34] <zoug> ManDay: i dont think so
[11:34] <ManDay> zoug, you dont think what?
[11:34] <ManDay> codelite?
[11:34] <Dr_Willis> cdavis:  look in your home dir/config/sub dirs. theres some Autostart dir somewhere you can add .desktop, or scripts. or ececutables to.
[11:34] <ManDay> oh, code::blocks
[11:35] <ManDay> hm darn thats ugly - is there no editor besides eclipse which can do that?
[11:35] <ManDay> one sec
[11:35] <zoug> ManDay: no the codeblocks code completion
[11:35] <cdavis> When I was using fluxbox startup items were very easy since it was just a file in my home_dir, so I would really like to stay with a single file
[11:35] <elky> vixus, it's less busy than syslog, but you can do syslog if you'd prefer
[11:35] <Dr_Willis> cdavis:  make some fancy script and put it in the autostart dir. or launch it from that gnome-sessions stuff
[11:35] <eremite> cdavis: http://embraceubuntu.com/2005/09/07/adding-a-startup-script-to-be-run-at-bootup/   this may be some help
[11:36] <Ashok> hey some one tell me how to add channel here
[11:36] <theadmin> o_O i just accidentally joined #ubutnu
[11:36] <Dr_Willis> gnome also has a way to 'rember all currently running programs' but that can get awkward
[11:36] <theadmin> Ashok: /join #newchannel
[11:36] <theadmin> Ashok: Then, /msg chanserv register #newchannel
[11:37] <cdavis> eremite: Thanks, I think that method will have things running much earlier in the boot process than I want.
[11:37] <billy> i just download a php tar.gz file but dont know how to install it can sum1 help?
[11:37] <Ashok> theadmin: but in server space what i need to enter
[11:37] <theadmin> billy: Don't use that .tar.gz, it won't install
[11:38] <billy> what should i use  i cant find a dev package
[11:38] <ESoft> hi all
[11:38] <eremite> No problem cdavis, I'm here to help.
[11:38] <Ashok> theadmin: hello
[11:38] <theadmin> Ashok: Uh, sorry, "server space"?
[11:39] <Ashok> theadmin: i don knw wr to join im new to linux
[11:39] <theadmin> ...lol. "squirrelmail - webmail for nuts"... what the heck :D
[11:39] <theadmin> Ashok: Just type that where you type messages. /join #newchannel
[11:40] <theadmin> Replace "newchannel" with channel name of course
[11:40] <ManDay> zoug, see the previouslast post: http://ubuntuforums.org/showthread.php?t=812355
[11:41] <Ashok> theadmin: thats what im askin where to type
[11:41] <jeeez> i created a bootable flash drive with unetbootin. can i use it as a portable OS? as in, can i install packages and stuff in it and still maintain the portability?
[11:41] <jeeez> theadmin: LOL :D
[11:41] <jeeez> Ashok: where are you typing now?
[11:41] <hoban> could someone please help me get my audio settings configured for ekiga? my microphone works and is corrected properly (verified with skype) but ekiga doesn't seem to work (maybe pulseaudio issue?)
[11:42] <Ashok> jeeez: i know where im typin now i need to type her its self
[11:42] <theadmin> hoban: Ahem, pulseaudio responds for playback, no?
[11:42] <obscurant1st> actually i was trying to install mac iaktos v7, and while booting up it showed me an error while mounting, it was 0x00000047
[11:42] <jeeez> Ashok: yup, same place. just try typing '/join #linux'
[11:42] <obscurant1st> erUSUL, ^^
[11:43] <hoban> theadmin, "responds for playback"? what do you mean? sound works on my machine, but my mic doesn't seem to work while in ekiga calls (but works find in twinkle/skype)
[11:43] <zoug> ManDay: lol, what does he mean at: it works 99% of time
[11:43] <Dr_Willis> jeeez:  unetbootin dosent make a 'persistant' save file . without some extra tweaking Theres other tools that DO make a save file.
[11:43] <theadmin> hoban: I mean, pulseaudio has nothing to do with mics, imo, it's just what plays the audio, not records
[11:43] <ManDay> zoug, 1% of the time it doesnt :)
[11:43] <erUSUL> obscurant1st: dunno what you are talking about ... what is mac iaktos v7 ??
[11:43] <ManDay> i just installed it... let's see,,,
[11:43] <Ashok> hi
[11:43] <hoban> theadmin, ok, so maybe not pulseaudio.
[11:44] <zoug> ManDay: okay
[11:44] <Dr_Willis> jeeez:   You could also do a 'normal' install to a usb flash drive. But be sure to tell grub where to install itself to. at the end of the install. Or unplug all extra hds  befor doing the install
[11:44] <jeeez> Dr_Willis: can you lead me to some link that'll make me a persistant installation in a pen drive?
[11:45] <zoug> ManDay: btw, do you code in c or cpp
[11:45] <ManDay> cpp
[11:45] <sowhat> could anyone please tell me how to get a default visudo file? I edited mine and now it doesn't ask for a password even when I type sudo.
[11:45] <jeeez> Dr_Willis: i don't have another device with the install files in! :\
[11:45] <Dr_Willis> jeeez:  check pendrivelinux.org
[11:45] <Ashok> any body help me how to get java channel please
[11:45] <jeeez> Dr_Willis: will do! thanks!
[11:45] <Dr_Willis> jeeez:  they got tools and guides for doing a persistant install
[11:45] <Gnea> Ashok: /join #java
[11:46] <Dr_Willis> jeeez:  or use a ubuntu live cd. and the ubuntu-usb-creator tool
[11:46] <zoug> ManDay: i use geany for my py dev
[11:46] <Ashok> Gnea: where to enter this
[11:46] <Gnea> Ashok: here
[11:46] <mocramis> bonjour tout le monde
[11:46] <Dr_Willis> Ashok:  same plave as youve been entering text. :)
[11:46] <mocramis> j'ai un truc bizarre
[11:46] <Gnea> Ashok: instead of typing: "Gnea: where to enter this", you type "/join #java"
[11:47] <ManDay> well geanny is definitly decent but IM OBSESSED BY AUTO COMPLETION!
[11:47] <jeeez> guys, i think Ashok is just needlessly acting naive. mods?
[11:47] <sowhat> could anyone please tell me how to get a default visudo file? I edited mine and now it doesn't ask for a password even when I type sudo.
[11:47] <ManDay> and geany doesnt do very well there :P
[11:47] <jeeez> Dr_Willis: in a sticky place, no cdrom either :\
[11:47] <mocramis> j'ai une commande que je lance par terminal, tout va bien, mais lorsque j'utilise un racourci, rien ne va plus.... quelqu'un a une idée ?
[11:47] <Ashok> "/join #java"
[11:47] <erUSUL> !fr
[11:47] <Gnea> !fr | mocramis
[11:47] <Gnea> Ashok: no quotes
[11:48] <Nesbitt> Anybody know which plugin is required that allows me to se/hear the ITVPlay streams
[11:48] <zoug> ManDay: personally i dont care about auto completions, infact i take more time doing an auto-complete than writing it down manually.
[11:49] <ManDay> hm
[11:49] <Ashok> its tellin unsupported commabd
[11:49] <sowhat> could anyone please tell me how to get a default visudo file? I edited mine and now it doesn't ask for a password even when I type sudo.
[11:49] <Ashok> Gnea: its tellin unsupported commabd
[11:49] <jrib> sowhat: pastebin your current one
[11:49] <Gnea> Ashok: weird. have you tried xchat?
[11:50] <Ashok> what is xchat
[11:50] <Ashok> Gnea: what is xchat
[11:50] <Gnea> Ashok: an irc client that accepts real irc commands
[11:50] <Gnea> !info xchat
[11:51] <sowhat> jrib: http://pastebin.org/120963
[11:51] <Ashok> Gnea: tell me the procedure how to add
[11:51] <Gnea> Ashok: you don't know how to add software?
[11:52] <Gnea> Ashok: have you used synaptic?
[11:52] <phrearch> hi
[11:52] <jrib> sowhat: you have a default one.  What does « groups » return?
[11:52] <phrearch> is there a download link for ubuntu server?
[11:52] <rsk> phrearch ubuntu.com
[11:52] <Gnea> phrearch: yeah, ubuntu.com
[11:52] <phrearch> i need to get it through wget, instead of the download link that obviscates the link
[11:52] <Ashok> Gnea: no i didt im new to ubuntu i recently insatalled
[11:52] <alexxio_>  i installed virtualbox but i havenot the usb support...i don't have a vboxusers group...what can i do?
[11:52] <gaveen> Ashok, sudo apt-get install xchat
[11:53] <Gnea> Ashok: okay. open a terminal via applications->terminal and type what gaveen said
[11:53] <sowhat> jrib: myusername adm dialout cdrom plugdev lpadmin admin sambashare
[11:53] <SmokeyD> hey everyone. I am having trouble with the permissions of a mounted a vfat partition.
[11:53] <SmokeyD> I mount it with "sudo mount -t vfat -o rw,uid=dolf,umask=000,iocharset=utf8 /dev/sdb1 /media/temp"
[11:53] <supintu> salve
[11:53] <ProfessorBacon> i have a window share i'd like to manipluate in bash, but the share doesn't show up in the list of mounted devices in 'mount'.  how does ubuntu automatically mount windows shares?  is there a way I can interact with one that has been mounted with the connect to server dialog in bash?
[11:53] <jrib> sowhat: you know sudo remembers the password for something like 15 minutes after you give it once?
[11:53] <ProfessorBacon> *windows
[11:53] <SmokeyD> but it only gets permissions drwx------
[11:53] <sowhat> jrib: really? how do you reset it?
[11:53] <SmokeyD> with the owner not being me
[11:54] <jrib> phrearch: releases.ubuntu.com
[11:54] <Ashok> Gnea: ya im doing
[11:54] <theadmin> what on earth does "reset" command do? For me it thinks for a while then cleans the terminal :/
[11:54] <Gnea> Ashok: k
[11:54] <erUSUL> phrearch: http://www.ubuntu.com/getubuntu/downloadmirrors#mirrors
[11:54] <Ashok> Gnea: im insatalling
[11:54] <gaveen> Ashok, https://help.ubuntu.com/community/XChatHowto for more info :)
[11:54] <edm0> Hi, I'm wondering why (in Karmic) dpkg-query does not show packages that aptitude search and Synaptic show? What am I doing wrong? http://ubuntu.pastebin.com/YYrRhv1P
[11:54] <phrearch> thanks
[11:55] <Nesbitt> How can I watch 'ITVPlay' all I get is a blank screen with sound
[11:55] <eremite> Ashok: SYSTEM > ADMIN > SYNAPIC PACKAGE MANAGER  This application will let you browse through ALL of the installable packages for Ubuntu in the repositories.  When you need a program for anything, for example a text editor, you would just open Synaptic and search for text editor.  A list of "packages" will show up and you can install the one you want by right clicking on the file and chosing "mark for installation".
[11:55] <ProfessorBacon> theadmin: man reset
[11:55] <sowhat> jrib: how do you reset sudo do it asks for the password again? I remember reading somewhere there is a short command.
[11:55] <jrib> sowhat: sudo -k
[11:55] <phrearch> what is the server edition?
[11:55] <eremite> phrearch: for setting up web servers.
[11:55] <sowhat> thanks much jrib
[11:56] <elky> theadmin, the man page says that it reinitialises the terminal session
[11:56] <phrearch> i mean, those code names are for the desktop versions right?
[11:56] <jrib> phrearch: no, they correspond to versions
[11:56] <phrearch> ah ok
[11:56] <phrearch> i see. thanks!
[11:56] <eremite> All k/f/X/L/Ubuntu have the same name, ie; Karmic, Lucid, Hardy etc.
[11:57] <phrearch> hehe, 600 mb image dl in 5 seconds
[11:57] <Gnea> Ashok: how is it going?
[11:57] <eremite> phrearch: if I could get speeds that fast here I'd start believing in gods.
[11:57] <Ashok> Gnea: stil on downloadin mode i think i need 5 min to download fully
[11:57] <theadmin> eremite: Same here o_O That's really fast
[11:57] <phrearch> 1gb uplink :-)
[11:57] <Gnea> Ashok: no problem.
[11:58] <Ashok> Gnea: thank u very much for helping
[12:01] <edm0> Someone please help? (in Karmic) dpkg-query does not show packages that aptitude search and Synaptic show? What am I doing wrong? http://ubuntu.pastebin.com/NzxtYiP3
[12:02] <jrib> edm0: dpkg only knows about things you have installed
[12:04] <edm0> jrib, I thought it showed uninstalled packages too? For e.g. if I run dpkg-query -W 'python-*' it shows some packages without version numbers against them?
[12:04] <DasEi> edm0: what do you want to do ? search installed packages or the apt-repo ?
[12:04] <jrib> edm0: yes, that's true.  I'm not sure about the specifics on that
[12:05] <jrib> edm0: my guess would be it doesn't show purged ones
[12:05] <scq> elisa?
[12:05] <edm0> DasEi, I was trying to retrieve a list of uninstalled Python libraries for use as installation candidates, in a project I'm contributing to.
[12:05] <Ashok> Gnea: i finishe downloadin where can i find it now
[12:06] <edm0> I finally wound up using aptitude search, just discovered this afternoon that I had this prob with dpkg-query
[12:06] <DasEi> edm0: so the dependencies ?
[12:06] <Gnea> Ashok: it is not installed. go applications->internet
[12:06] <Gnea> Ashok: it is NOW installed. sorry.
[12:06] <edm0> DasEi, yes...the project is Acire, on Launchpad.net, I just proposed a feature branch merge using aptitude search, but was very puzzled abt dpkg-query
[12:07] <DasEi> edm0: apt-cache search for seeing what is in repo, apt-cache  show = list specific paket, apt-cache depends = name says it
[12:07] <Ashok> Gnea: k tell me now how to add
[12:07] <Ashok> Gnea: i need to add java channel
[12:08] <Gnea> Ashok: first of all, join freenode to here.
[12:08] <Ashok> Gnea: in x chat
[12:08] <Ashok> or here
[12:08] <culinor> hello guys, can you tell me a safe way to re-install firefox because it's bugging?
[12:08] <Gnea> Ashok: in xchat, to here
[12:08] <jrib> culinor: reinstalling doesn't fix things
[12:08] <Dr_Willis> culinor:  reinstalling proberly wont fix things.. cleaning out the users settings/plugins may
[12:08] <culinor> what should i do, i cannot use it now, i have to do something
[12:09] <jrib> culinor: start by explaining exactly what you mean by "bugging"
[12:09] <culinor> you think the problem might be the plugins/addons?
[12:09] <Dr_Willis> culinor:  even if you used the package manger to remove/reinstall Firefox.. the USERS settings will stay the same
[12:09] <Dr_Willis> culinor:  no idea. Make a new user and see if it affets them also.
[12:09] <edm0> DasEi, thanks... apt-cache seems to give cleaner results than aptitude search - wish I
[12:09] <edm0> ...had asked earlier
[12:09] <culinor> by bugging i mean when i start it it stays almost transparent and you cannot use it
[12:09] <RussellAlan> im getting a constant, sort of click noise, or duh dun.
[12:09] <RussellAlan> running ubuntu 9,10 gnome
[12:10] <culinor> thanks, dr_willis, good idea, i will try with another user
[12:10] <DasEi> edm0: np
[12:10] <RussellAlan> im used to kde so if anyone helps please be warned =D
[12:10] <ganjaman420> Yo I'm a linux noob, but I got this cmospwd thing that came in a tar.bz2 and extracted it and it's got some .c files in it... How do I run this thing?
[12:10] <Dr_Willis> culinor:  or move the .mozilla dir to some other name.
[12:10] <mind_> hi, i'm wondering why i can't map a shortcut on my keypad numbers key (gnome-keybinding-properties will set the shortcut to IE: <Control>KP_6) but the event doesn't get caught
[12:11] <mind_> i mean, if i press cltr+kp_6 on my keyboard, nothing happens
[12:11] <jrib> edm0: aptitude can output results in whatever format you want it to and it's search is a lot more powerful
[12:11] <eremite> ganjaman420: http://www.linuxforums.org/forum/installation/2634-untar-install-program.html
[12:11] <jrib> its even
[12:11] <Guest14770> I have selected the slowest acceleration available, the lowest sensitivity available, but the mouse pointer still moves too fast
[12:11] <DasEi> ganjaman420: you want to install what ? (full name of the tar.bz2)
[12:11] <mind_> but, kp_multiply, kp_enter, kp_delete etc.. will work just fine, it's just the numbers
[12:11] <Guest14770> What can I do do slow it down further?
[12:12] <Guest14770> do to*
[12:12] <edm0> jrib, yes, so I found out :-) thanks... :-)
[12:12] <edm0> after dpkg-query
[12:12] <edm0> adjusting to aptitude search regex took some time :-)
[12:12] <mrman208> hi
[12:13] <mrman208> hey, is there a seperate channel for ubuntu studio, or is this the channel for all ubuntus
[12:13] <Dr_Willis> !ubuntustudio
[12:13] <mrman208> ok, thanks
[12:13] <Vroomfondle> mrman208: #ubuntu-studio
[12:14] <Dr_Willis> ganjaman420:  you compile c code. then run the executable.. good luck.
[12:14] <Dr_Willis> !compile | ganjaman420
[12:14] <culinor> guys, my firefox it's working fine under another user, should i conclude the problem is from any addons/plugins?
[12:14] <Dr_Willis> culinor:  i would say thats a valid conclusion
[12:14] <culinor> thank you Dr_Willis
[12:14] <ganjaman420> Man why does this have to be so bloody complicated
[12:15] <ganjaman420> Why can't I just double click something for god's sake
[12:15] <Dr_Willis> culinor:  now you know one of the fundamental differances of how Windows and Linux handle packageing of progrms. :)
[12:15] <ganjaman420> lol :P:
[12:15] <miraculix> culinor: you can try moving/deleting your .mozilla directory to clear all settings
[12:15] <Gnea> ganjaman420: because this isn't windows lol
[12:15] <SmokeyD> hey people. It is really strange. Any options that I specify with mount -t vfat -o .... get's ignored. Whether I specify umask=000, uid/gid or whatever, the vfat partition keeps getting mounted with the same permissions and owner
[12:15] <Dr_Willis> ganjaman420:  I imatgine thats a command line utility also.
[12:15] <DasEi> ganjaman420: you want to install what ? (full name of the tar.bz2)
[12:15] <culinor> can i remove plugins/addons by removing files or directories cos. it's almost impossible to remove them through firefox manager?
[12:15] <Dr_Willis> ganjaman420:  bios hacking is sothing to be carefull with
[12:15] <adalal> anyone here aware for eduroam's proxy settings?
[12:15] <ganjaman420> cmospwd-5.0.tar.bz2
[12:15] <SmokeyD> any ideas?
[12:15] <Gnea> ganjaman420: there's a learning curve, and there's a procedure for everything
[12:15] <culinor> thank you Dr_Willis
[12:15] <DasEi> culinor: no, very simple through ff
[12:16] <[biabia]> how old is 5.10    3 yr ?
[12:16] <Dr_Willis> culinor:  or move the .mozilla dir.. and restart firefox. all new settings then.
[12:16] <DasEi> !who | ganjaman420
[12:16] <culinor> DasEi, it's simple if it was not bugged :)
[12:16] <Dr_Willis> [biabia]:  the version #;s is the date. year/month
[12:16] <DasEi> culinor: important bookmarks on it ?
[12:17] <Dr_Willis> bookmarks are easy to backup :) i recall.. but i keep all mine at some web-bookmark sites/services
[12:17] <culinor> Dasei, i have them uploaded to a server so it's ok :)
[12:17] <[biabia]> Dr_Willis: thanks  hmm so its pretty old.  actually i think the first one i used was 5.04
[12:17] <Sensiva> ganjaman420 definitely in that tar.bz2 archive a text file describing compiling, installing and running instructions.
[12:17] <Gnea> ganjaman420: so what do you want to do with that?
[12:17] <DasEi> ganjaman420 : that can be little tricky, as it can compromise your sys, what does that do ? no tool like it in the repos ?
[12:18] <DasEi> culinor: sudo apt-get remove --purge firefox
[12:18] <theadmin> Hm. What a beast of a command: "find / -exec rm -rf
[12:18] <DasEi> culinor: sudo apt-get install firefox       .. and they are all gone
[12:18] <theadmin> Damn, pressed enter key... well, you got it i think :D
[12:18]  * Gnea looks at theadmin.
[12:18] <Dr_Willis> Purgeing firefox will NOT remove currupted 'user' settings/plugins
[12:18] <ganjaman420> DasEi, Gnea - gotta get my BIOS password lol :x
[12:18] <mind_> could anyone try this please? map a keyboard shortcut with gnome-keybindings-properties on a keypad number key (ie, ctrl + KP_6) and tell me if that works?
[12:19] <culinor> DasEi, what would purge do?
[12:19] <Gnea> ganjaman420: ok
[12:19] <DasEi> ganjaman420: errm, remove battery ?!
[12:19] <ganjaman420> Tried that. It doesn't work =[[
[12:19] <DasEi> culinor: delting ff's config, also
[12:19] <Sensiva> ganjaman420 notebook or desktop pc?
[12:19] <theadmin> Gnea: Don't look at me. I just think this should be added to "dangerous commands" on the forum (full command "find / -exec rm -rf '{}' \;"... pretty dumb though, but still danjrus
[12:19] <ganjaman420> Notebook.
[12:19] <culinor> DasEi, removing all firefox directories?
[12:19] <Dr_Willis> culinor:  move/rename/delete the  .mozilla directory is one way.
[12:19] <Dr_Willis> culinor:  its in the users home dir.  as a hidden dir.
[12:19] <DasEi> ganjaman420: nedd some time, or bridge the contacts of the batt-whole
[12:20] <DasEi> culinor: the whole ff-related config
[12:20] <Gnea> theadmin: yeah
[12:20] <ganjaman420> How much time? I've tried like 30 minutes... Was advised to try 5 minutes
[12:20] <ganjaman420> It even says time and date reset and stuff - but the bios password is still on =[[
[12:20] <Ashok> frnds can i find note pad in ubuntu
[12:20] <Sensiva> ganjaman420 please consult your notebook manufacturer's support before doing your current plan.
[12:20] <culinor> Dr_Willis, DasEi , i will make a copy of the config dir before reinstalling, right
[12:21] <Ashok> bcos im new to ubuntu linux
[12:21] <Dr_Willis> Ashok:  theres dozens of text editors in Linux/ubuntu
[12:21] <Dr_Willis> Ashok:  gedit, geany,  and dozens of others
[12:21] <DasEi> ganjaman420: what is it then, desk or lappi ?
[12:21] <Ashok> Dr_Willis: how to open gedit
[12:21] <ganjaman420> DasEi, lappy...compaq 6730b
[12:21] <DasEi> culinor: can, but why ?
[12:21] <Dr_Willis> Ashok:  its in the menus.. or double click omn a text file
[12:22] <Dr_Willis> Ashok:  or run 'gedit' from a terminal
[12:22] <Sensiva> Ashok What are you using Ubuntu/Kubuntu/Xubuntu?
[12:22] <Q_Continuum> Oh great.  Just booted up Ubuntu 9.10 amd-64 off a flash drive, and after showing the boot screen all 3 displays went blank.
[12:22] <culinor> DasEi, just not to lose something that's important
[12:22] <Ashok> Dr_Willis: k but can i open it thru some menus
[12:22] <rsk> Ashok he said you could open it via the menu...
[12:22] <Dr_Willis> Ashok:  look in your menus.. its proberly there somewhere. as i said.
[12:23] <culinor> thank you for help Dr_Willis, DasEi
[12:23] <Gnea> Ashok: did you get xchat to work?
[12:23] <Dr_Willis> culinor:  firefox also has command line options to use other  profiles.
[12:24] <culinor> Dr_Willis, i didn't know that
[12:24] <Dr_Willis> culinor:  it has dozens (or more) command line options
[12:25] <Dr_Willis> see 'firefox --help'
[12:25] <culinor> Dr_Willis, do you mean through the terminal?
[12:26] <Dr_Willis> culinor:  err.. where else you going to type in commands at? :)
[12:26] <Dr_Willis> !terminal
[12:26] <chandru_in> Though I've been using ubuntu for quite some time, I've never bothered changing its theme.  However I'd love to change the theme for 10.04.  How do I change the system wide theme settings?
[12:26] <culinor> type of firefox terminal came to my mind :)
[12:26] <DasEi> ganjaman420: I don't think that app will work, you're trapped : http://www.techspot.com/vb/topic109612.html
[12:26] <Dr_Willis> chandru_in:   change them TO or from the annoying one in 10.04 ?
[12:27] <Dr_Willis> culinor:  i saw a firefox extension the other day that let you select, and run line as a command. in FF. :) handy for tutorial pages
[12:27] <chandru_in> Dr_Willis: From the annoying one
[12:27] <Dr_Willis> chandru_in:  i was exporting that last night. One way to get part of it done is remove the light-themes package.
[12:28] <ganjaman420> DasEi, oh yeah this cmospwd readme says "dont use with laptops" lol... Apparently I need somethin called eeprom
[12:28] <culinor> nice, Dr_Willis , thank you for your time, see you later
[12:28] <chandru_in> Dr_Willis: DIDN'T GET YOU
[12:28] <chandru_in> Sorry for the caps
[12:28] <chandru_in> its was accidental
[12:28] <Q_Continuum> Ok, this is annoying.  The ubuntu installer is defaulting to the second HD.  I am going to have to power down, open box, UNPLUG second HD just to get it to install to the OS drive >.<
[12:28] <Dr_Willis> chandru_in:  the themes are in the 'light-themes' package in 10.04 - remove them and the defaults go to some other theme
[12:28] <Dr_Willis> chandru_in:  but 10.04 chat in #ubuntu+1 :)
[12:29] <Sensiva> Q_Continuum you can drop to shell and mount the desired partition into /hd-media/
[12:29] <Q_Continuum> This is frustrating.  "This computer has no operating systems on it." yet below it defaults to "Install them side by side, choosing between them each startup" yet wants to put itself on the second (data) drive.
[12:29] <Q_Continuum> No, I'll just pull the stupid case
[12:29] <Q_Continuum> otherwise it might just do something stupid like put a bootloader there or something.
[12:29] <DasEi> ganjaman420: worth a try would be the bios~blah.exe from the link, running in wine -- but no guarantee/warrantee on that, if you bought it in a shop, must bring it in, dell has good support, they will read it out
[12:29] <Q_Continuum> knowing my luck anyway
[12:30] <ganjaman420> DasEi, bios~blah.exe...???
[12:30] <DasEi> ganjaman420:  http://www.techspot.com/vb/topic109612.html
[12:30] <Ashok> any body tell me ist it possible to open two channels at same time
[12:30] <grobda24> What are the best permissions for server directories ? 555 for directories that have PHP, and 666 for upload dirs ?
[12:30] <DasEi> under attachments
[12:31] <DasEi> Ashok: irc ? sure
[12:31] <ganjaman420> Oh right cheers
[12:31] <Ashok> DasEi: what is irc and where can i find it im new to ubuntu
[12:31] <nmvictor> my wireless aint working properly, nm-applet show the wireless networks which when i try to connect to,the connection is attempted (the circling thing) for quite a while then stops, during bootup, i get this message, :: eth1, error loading agere_sta_fw.bin , i am running jaunty powerpc in an iBook.Please help
[12:32] <DasEi> Ashok: irc is internet relay chat, the medium we just use, and you speak in the channel #ubuntu
[12:33] <Ashok> DasEi: how to join im askin n where to join
[12:33] <DasEi> Ashok: /join #freenode               <<channel for generic irc-questions
[12:33] <grobda24> nmvictor, looks like you don't have the correct firmware for your wireless hardware ... find out it's model number.
[12:33] <randompie> Hi! I wanted to do networking without "network-manager" on karmic. I have uninstalled NM, and my networking seems to work fine on doing a "service network start", but *not* at boot time. Please suggest where to add networking - can't get the hang of how upstart works.
[12:34] <Ashok> DasEi: so where to enter tat text
[12:34] <theadmin> Uh, where is that httpd.conf in Ubuntu's Apache again?
[12:34] <eremite> Ashok: You are on IRC right now.
[12:34] <SquidNoobX> when i write "ip route add local 0.0.0.0/0 dev lo table 100" i get "RTNETLINK answers: File exists"
[12:34] <SquidNoobX> how can i delete this file?
[12:34] <DasEi> Ashok: just where you enter your answersquestions, in messenger
[12:35] <lodder> When I'm using lucid and freenx server I'm losing the titlebar of the window, and why when I do apt-get dist-upgrade wants to remove nautilus?
[12:35] <nmvictor> will somone plase help me with my wireless issue?
[12:35] <eremite> theadmin: use the search utility?  Faster usually.
[12:35] <theadmin> eremite: I'm helping a friend of mine, don't have a local apache installation
[12:35] <abhi_nav> !details | nmvictor
[12:35] <randompie> nmvictor: what's the issue?
[12:35] <Ashok> DasEi: ya i enetred but nothin came
[12:36] <MORMI> hello i have a problem with ubuntu
[12:36] <eremite> theadmin: tell yoru firend to use the search utility?
[12:36] <blekos> i try to connect to windows network but I get the msg "cannot retrieve share list"
[12:36] <DasEi> Ashok: which messenger ?
[12:36] <abhi_nav> !lucid | lodder
[12:36] <Pici> Ashok: You may want to start with http://irchelp.org/irchelp/irctutorial.html , as this really isn't an Ubuntu support channel, #ubuntu-offtopic might be a better place to disucss.
[12:36] <Ashok> DasEi: nothin i recieved
[12:36] <theadmin> eremite: Problem is they renamed it to something like apache.conf or apache2.conf or whatever
[12:36] <lodder> abhi_nav: thx
[12:37] <DasEi> Pici: righty, but least needs to now how to join a channel
[12:37] <selimaky> hi
[12:37] <abhi_nav> Pici: what? you said that ".........as this really IS NOT ubuntu support channel........" ? why? I am confused :(
[12:37] <eremite> If I get the Karmic beta, will I be able to do a proper upgrade without reinstalling the OS?  I mean a proper upgrade and not like the sketchy tansfer from Jaunty to Karmic that left the system feeling ill.
[12:37] <abhi_nav> lodder: hmm
[12:37] <eremite> **Lucid
[12:37] <DasEi> Ashok: did you enter #freenode ?
[12:37] <rsk> eremite maybe
[12:37] <Pici> abhi_nav: er, I mispoke. I meant "this isn't an Ubuntu support channel topic"
[12:37] <abhi_nav> !lucid > eremite
[12:38] <grobda24> blekos, I suggest going through the guide on the Samba site ... you might need a few settings added to /etc/samba/smb.cfg
[12:38] <lodder> abhi_nav: hmm? point?
[12:38] <Ashok> DasEi: ya i entered /join #freenode
[12:38] <eremite> How do I see private messages in irssi?
[12:38] <eremite> nevermind
[12:38] <abhi_nav> Pici: ohh ohh I see yahh yah . Hmm now i got. I was just shocked for a second, and I am keep checking if I am in right chennl or not. haa haa but. its ok fine
[12:38] <abhi_nav> Pici: :D
[12:39] <DasEi> Ashok: so you now should have a tab daying #freenode, click it
[12:39] <DasEi> saying*
[12:39] <SquidNoobX> when i write "ip route add local 0.0.0.0/0 dev lo table 100" i get "RTNETLINK answers: File exists" why?
[12:39] <selimaky> i have a problem, i upgrade my Karmic to Lucid, and my firefox fonts are different than previous one. How do i fix my fonts?
[12:39] <eremite> Pici, thsi IS an Ubuntu support channel.
[12:39] <Pici> eremite: Yes. I know that, I missed a word.
[12:39] <Ashok> DasEi: where can i find it first of all
[12:39] <eremite> No, you added a word, technically.
[12:40] <rsk> selimaky downgrade to karmic
[12:40] <Pici> rsk: That is not supported.
[12:40] <mrman208> hi
[12:40] <rsk> Pici i know
[12:40] <abhi_nav> lodder: what happends? join #ubuntu+1 for lucid support
[12:41] <Pici> selimaky: Please join #ubuntu+1 for Lucid support
[12:41] <DasEi> Ashok: which messenger are you using?
[12:41] <Pici> rsk: Then why suggest it?
[12:41] <Dr_Willis> its not even possible i thought.
[12:41] <selimaky> ok thanks
[12:41] <Dr_Willis> Or not easyally done :)
[12:41] <lodder> abhi_nav: I just did
[12:41] <Dr_Willis> selimaky:  try a new user. see if FF looks proper for them?
[12:41] <rsk> Pici because if he is ready to use beta, and is scared when there's a new font. he shouldn't be using it.
[12:41] <mrman208> is it possible to install UNR on a 512 mb flash drive?
[12:41] <abhi_nav> lodder: yah
[12:41] <randompie> karmic: where to initialize networking at boot time without network-manager?
[12:41] <Ashok> DasEi: means what
[12:41] <lodder> abhi_nav: waiting for response on the mather
[12:41] <Dr_Willis> selimaky:  and ive also noticd the FF fonts look a little different.  just barely - but a littel different
[12:41] <Pici> rsk: Please suggest that he ask in #ubuntu+1 in the future, asking to downgrade is even less supported.
[12:42] <porta> randompie: /etc/network/interfaces
[12:42] <mrman208> is it possible to install UNR on a 512 mb flash drive????
[12:42] <grobda24> Having trouble finding this ... what is the usual permission on a directory ?
[12:42] <DasEi> Ashok: you type your messages to me in which app ? pidgin ? xchat ?
[12:42] <abhi_nav> lodder: yah hmm good. be patient !          ;)
[12:42] <mrman208> is there a unr channel i can go to?
[12:43] <mrman208> ...
[12:43] <lodder> abhi_nav: I'm patient ....
[12:43] <mrman208> anyone?
[12:43] <Ashok> DasEi: empathy
[12:43] <abhi_nav> !unr
[12:43] <abhi_nav> lodder: hmm
[12:43] <mrman208> so support is here
[12:43] <mrman208> ok
[12:43] <abhi_nav> yah
[12:43] <DasEi> mrman208: hardly, about 1 gig is lowest boarder, unless sth. headless/striped down
[12:43] <mrman208> ok, thanks
[12:44] <mrman208> if you have an external cd drive you can install unr with a cd, right?
[12:44] <Dr_Willis> mrman208:  yes.
[12:44] <randompie> porta: interfaces are there in the file. how to start the service?
[12:44] <DasEi> mrman208: yes
[12:44] <mrman208> thank you!
[12:44] <Dr_Willis> mrman208:  or make a bootable usb flash drive
[12:44] <Ashok> DasEi: empathy
[12:45] <nmvictor> is it possible to generate a package download script with aptitude?
[12:45] <DasEi> nmvictor: yes, it is
[12:45] <mrman208> Dr_Willis: I would, but the only flash drive i have is a 512 MB one
[12:45] <Dr_Willis> mrman208:   thats.. scary :)
[12:45] <DasEi> !clone > nmvictor
[12:45] <Dr_Willis> mrman208:   I got a  whole pile of 1gb+ ones.
[12:45] <abhi_nav> DasEi: how
[12:46] <mrman208> Dr_Willis: Well, i do have a 1 GB flash drive but its busted
[12:46] <abhi_nav> Dr_Willis: why scary?
[12:46] <DasEi> nmvictor: can also  write a simple bash-script
[12:46] <Dr_Willis> Flash drives are like floppy disks now.. I got stacks of them.. wher i used to have stacks of floppies years ago.
[12:46] <mrman208> Dr_WIllis: lol
[12:46] <abhi_nav> Dr_Willis: :D
[12:47] <mrman208> Dr_WIllis: it seems like CD's are turning into floppy drives too :P
[12:47] <Dr_Willis> mrman208:  wife decided  i should collect 'them' shes always getting me funny ones. of a dog, or frog. or panda bear.
[12:47] <mrman208> *disks
[12:47] <mrman208> :D
[12:47] <Ashok> what is bash script
[12:47] <Dr_Willis> mrman208:  im about ready to toss out my optical disks also
[12:47] <Dr_Willis> Ashok:  a script written in bash..
[12:47] <Dr_Willis> #!/bin/bash
[12:47] <Dr_Willis> ls -al
[12:47] <DasEi> Ashok: in the titlebar, there should now be a tab #freenode, click on it to change channel
[12:47] <Dr_Willis> theres an example :)
[12:47] <mrman208> Ashok: a bash script is a bunch of terminal commands written into a script that you can run
[12:47] <Ashok> Dr_Willis: what is bash
[12:48] <Dr_Willis> !bash | Ashok
[12:48] <Dr_Willis> Ashok:  time to learn some linux FUNdamentals
[12:48] <mrman208> well, bye all!
[12:48] <DasEi> Dr_Willis: nick- miss ?! > abhi_nav
[12:48] <Ashok> Dr_Willis: ya rite im new dear
[12:48] <Dr_Willis> Ashok:  the default user shell  is bash.
[12:49] <blackxored> Hi guys, to whom I can contact about landscape?
[12:49] <Pici> blackxored: Regarding an email that you got about it>?
[12:49] <Ashok> Dr_Willis: thx
[12:49] <Zta> Need help for Evolution.  I fscked up.  I thought the Trash folder was just an ordinary folder.  I tried to move some mail from Trash into another folder, but it seem to work, because the mail was still in Trash.  I tried again a few times before I realised that the mail was in fact copied N times!  Now I need to remove duplicate e-mails in a folder.  Is there an automatic way to do this?
[12:49] <blackxored> Pici, yeah
[12:50] <Zta> *but it _didn't_ seem to work.
[12:50] <DasEi> Ashok: found it ?
[12:50] <Dr_Willis> Ashok:  theres this -> but its a work in progress -->  http://www.ubuntu-manual.org    and its for the next release :)
[12:50] <Ashok> DasEi: im stim unable to connect
[12:51] <DasEi> Ashok: I'll open a new window in your messenger, click on it :
[12:51] <Pici> blackxored: From what I hear it was mistakenly sent out to some people, this was said elsewhere:"apparently this was only meant to have been sent to people who were current candidates for jobs at Canonical, but was mistakenly sent to rather more people than that; the Landscape people are looking into it"
[12:51] <Gnea> Ashok: you didn't get xchat to install?
[12:52] <porta> randompie: man update-rc.d
[12:52] <nmvictor> DasEi: thanks but that would be if the machines share the same arcitecture and maybe point to the same repos, in my case i have packages selected in aptitude in my iBook running a jaunty ppc(so definately its sources.list point to port.ubuntu.com where we have power-pc arch .debs), since i have issues with my wireless, i want to download this packages from another machine Intel of course then move them to ppc machine for installation,
[12:52] <nmvictor> in this case i thought only a package download script would do, what do you sat?
[12:52] <Ashok> gnea:i got xchat i installed
[12:52] <Ashok> DasEi: k
[12:53] <amikrop> Hello. I can login to Twitter from their website or Tweetdeck for Linux, but when I try it from my iPhone either Echofon or Tweetdeck, it says authentication failed.
[12:53] <amikrop> Any possible reason why that happens?
[12:53] <amikrop> I know it is offtopic, but I didn't know where else to ask.
[12:53] <Gnea> Ashok: ok, so get it to connect to freenode
[12:53] <DasEi> !aptoncd | nmvictor
[12:53] <Guest23030> hello i have a wireless problem, with atheros AR5001 on an acer aspire one, after some  time of inactivity or not the wireless goes down and i cannot get it back unless i do a shut down.
[12:54] <DasEi> Ashok: answer pm ?
[12:54] <Zta> Ah, seems like my prayers have been answered here: http://www.siltala.net/2007/11/18/getting-rid-of-duplicate-messages-in-evolution/
[12:55] <nmvictor> DasEi: thats also another option but looks like you dint get the part on repos pointing  to different servers, besides i dont have another power pc machine to run aptoncd from
[12:56] <Ashok> Dr_Willis: how and where to learn linux fundamentals
[12:57] <Gnea> Ashok: whyt can't you just connect using xchat?
[12:57] <Gnea> *why
[12:57] <DasEi> nmvictor: you could set the sources list for just downlaoding to intel (and -reset afterwards) , then make apt just downlaod them
[12:58] <Sensiva> Ashok here you go https://help.ubuntu.com/
[12:58] <Ashok> gnea:in xcaht  im not findin freenode at all
[12:58] <DasEi> nmvictor: but that's really nasty, no way to wire the intel machine ?
[12:58] <wols> DasEi: how do you set it to downloading for intel?
[12:58] <Gnea> Ashok: perhaps you're not using it right
[12:58] <nn-digger> всем привет
[12:58] <Gnea> !ru | nn-digger
[12:59] <abhi_nav> hi
[12:59] <DasEi> wols: by using are acoording sources.list and make it not install, but store
[13:00] <Gnea> Ashok: xchat should automatically connect to freenode
[13:00] <wols> DasEi: where in your sources.list does it say anything about what arch you download?
[13:00] <Flamekebab> Can I turn off compiz for an individual program?
[13:01] <Gnea> no, compiz affects the whole desktop, you'd have to turn compiz off for the whole thing
[13:01] <abhi_nav> DasEi: I was disconnected. What were you talking to Dr_Willis about my nick?
[13:02] <DasEi> wols: powerpc or intel ?
[13:02] <wols> DasEi: any
[13:02] <Flamekebab> Damn. I want to run Yakuake but it irritates me that it plays my window-close animation when I hide it again
[13:02] <DasEi> abhi_nav: yes, you asked how, and if that wasn't a miss, I think was about howto dooooooooo anpt-script
[13:02] <Q_Continuum> fresh install of Ubuntu 9.10, updating it for first time.  Configuring grub-PC says that a new version of the config file is available, but my copy's been modified.  I forget what option I want on this...
[13:03] <TommoPuppy> yeah i think it's pretty much established that my craptop can simply not have linux installed on it
[13:03] <TommoPuppy> no matter what i try
[13:03] <bwlang> I'm thinking about using runit as an unprivileged user to managed some background jobs ... is this a bad idea?
[13:03] <abhi_nav> DasEi: yah exactly
[13:03] <TommoPuppy> there's always something wrong
[13:04] <Flamekebab> Cheers, Gnea.
[13:04] <TommoPuppy> my 5.04 disc can't get past GRUB installer. Puppy Linux is the complete opposite. It installs GRUB but not the OS
[13:04] <TommoPuppy> 9.10 can't use the hard drive for some reason
[13:04] <Gnea> Flamekebab: cheers
[13:04] <abhi_nav> hey, I just installed 64 bit 9.10 and found it so great!!!!.
[13:04] <TommoPuppy> my 7.04 disc doesn't even boot
[13:04]  * abhi_nav cheers to FOSS!!! Long live FOSS!!!!!!    :D :)
[13:04] <DasEi> abhi_nav: then drwill.. answered that question to asho.. this why I invented, ash.. is currently so new, that he can't find #freenode, so no use in bash-scripting
[13:05] <abhi_nav> DasEi: ohh hmmm
[13:05] <liuce> 能发中文吗？
[13:06] <Pici> !zh | liuce
[13:06] <abhi_nav> Pici: zh? means?
[13:07] <DasEi> abhi_nav: #!/bin/bash    ^  sudo apt-get install packages ^ paket  ^ paket
[13:07] <DasEi> abhi_nav: will do that, where ^ indicates a new line in the script
[13:08] <abhi_nav> DasEi: yah Thank you for your help. I just installed new 9.10 64 bit. I am busy with its house keeping. !!! :D and really thankyou for your help!
[13:08] <abhi_nav> DasEi: I wll note down this
[13:08] <Pici> abhi_nav: its a 2 letter language/country code for Chinese
[13:08] <abhi_nav> Pici: how? 2 letter code for China shold be "Ch" naa?
[13:09] <DasEi> abhi_nav: ch would be switzerland
[13:09] <abhi_nav> DasEi: ohhh! :D this world is full of confusing and contradictory things!!! :D
[13:10] <DasEi> abhi_nav: damned orders, this computers :)
[13:11] <abhi_nav> DasEi: yahh haa ha :D
[13:11] <Doroff> Hi
[13:12] <Doroff> i have quastion about ubuntu and seagate barracuda
[13:13] <Doroff> should I correct some properties to setup Ubuntu or Debian?
[13:13] <ChogyDan> Doroff: ask away
[13:13] <Doroff> in BIOS of cours
[13:13] <Doroff> should I correct some properties to setup Ubuntu or Debian?
[13:13] <ChogyDan> Doroff: try to ask your whole question in a single line
[13:13] <Doroff> ok ))
[13:14] <eremite> How do I play the entire contents of a folder consisting fo video files via the terminal without entering the full path to each file?  I have VLC, Totem, Mplayer but prefer VLC because I need subtitles.
[13:14] <Doroff> should I correct in BIOS some Hardware properties to setup and used Ubuntu or debian?
[13:14] <Doroff> sorry for my English ..
[13:14] <abhi_nav> Doroff: which is your language? there may be a separate channel for your language
[13:15] <ChogyDan> Doroff: is there a reason why you think you need to setup your hdd?
[13:15] <Doroff> abhi_nav well - it can be better, but more specialist speak in english )
[13:15] <abhi_nav> Doroff: hmmm yah you are right!
[13:16] <abhi_nav> Doroff: ;)
[13:16] <eremite> But there may be a perfect helper in yoru own language.
[13:17] <Q_Continuum> Ok, installed the fglrx driver to enable my 3-display setup, and now I get an "unsupported hardware" watermark in lower right corner and my mouse icon is GONE.
[13:17] <Doroff> I have problem that problem with ubuntu Decktop Edition 9.10. After setting up I can used them, but only 3 ot 5 minute. After that time help only reboot
[13:17] <Doroff> debian don't setuped
[13:18] <abhi_nav> !details | Doroff
[13:19] <Doroff> ChogyDan yeah. I think that becouse in two experiaments Ubuntu stopped setup in formatting process (5%)
[13:20] <ChogyDan> Doroff: hmm, I don't know, but I doubt doing anything in the bios will help that.
[13:21] <xuxin> Hi there sportfans! does anyone know if there is a way to get the zoom in/out function on my eee touchpad working?
[13:22] <linuxman410> i have a laptop that has debian installed but i want to install ubuntu but only has floppy drive any help
[13:23] <xuxin> linuxman410: no usb?
[13:23] <rsk> linuxman410 try netboot
[13:23] <abhi_nav> ChogyDan: you understood what his problem his? Please tell me.
[13:23] <linuxman410> yes it has 2 usb ports
[13:23] <abhi_nav> ChogyDan: is*
[13:23] <xuxin> make a bootable usb drive
[13:24] <linuxman410> it will not boot from usd
[13:24] <linuxman410> usb
[13:24] <xuxin> linuxman410: use unetbootin
[13:24] <xuxin> yes, there should be a setting for that in the bios, or the boot menu
[13:24] <Sensiva> linuxman410 https://help.ubuntu.com/community/Installation/FromLinux
[13:25] <ChogyDan> abhi_nav: well, he wants to know if he has to setup his hdd in the bios, since Ubuntu can't get past %5 formatting
[13:25] <Doroff> ChogyDan very strange for me that one fact - XP working...but Ubuntu don't...
[13:26] <abhi_nav> ChogyDan:  you mean, in short ubuntu not installing , and it goes only till that 5%?
[13:26] <xuxin> anyone with an asus eee laptop who've got the zooming function on the touchpad working?
[13:26] <ChogyDan> Doroff: are you using the livecd?
[13:27] <ChogyDan> abhi_nav: ya
[13:27] <abhi_nav> ChogyDan: hmm. thanx
[13:28] <abhi_nav> Doroff: may be because the partition is not well formated ? try only formating it with ext from livecd and then install
[13:29] <Roasted_> In Windows when I need to test audio, I just fire up the sample clips that come with XP... like Beethoven or that other clip. In Ubuntu I want to test the sound, but where can I go to test a system sound or osmething?
[13:29] <ChogyDan> Roasted_: gstreamer-properties
[13:29] <eremite> Roasted_: archive.org has a ton of free and open source audio and video.
[13:29] <Gorgory> ae galera,instalei aqui o ubuntu 8.10 to querendo ver a particao do windows os arquivos do windows,qual procedimento?
[13:29] <Roasted_> ChogyDan, how do I get there exactly?
[13:29] <abhi_nav> Roasted_ there is audio fine in /home examples
[13:30] <abhi_nav> Roasted_ file*
[13:30] <Roasted_> I dont have an examples folder
[13:30] <abhi_nav> you have
[13:30] <Roasted_> Im on a Live CD.
[13:30] <Roasted_> There is no examples folder in the home directory.
[13:30] <abhi_nav> ?
[13:30] <ChogyDan> Roasted_: alt+f2  then type that in
[13:30] <Roasted_> desktop doc download mus pic public templ videos
[13:30] <Roasted_> ChogyDan, that worked. This is familiar... so I know I should hear audio here.
[13:31] <ChogyDan> Roasted_: yeah, allot of apps use gstreamer, but you gota click the test button
[13:31] <Roasted_> ChogyDan, I did. Both of them. Nadda. Just as I suspected - dead sound card.
[13:32] <basncy> Anyone who knows some Adult Channel?
[13:32] <BulleTh0> Hello. Besaid /etc/network/interfaces, does ubuntu store conection detalies elsewhere? When I reboot the box, it appears an eth0:2 which is not in /etc/network/interfaces.
[13:32] <baba_b00ie> whats the command to bring eth0 up and down without rebooting my box ?
[13:32] <abhi_nav> can I install add/remove in 9.10? USC is good. but I wll use it when it comes in version 3
[13:32] <xuxin> anyone with an asus eee laptop who've got the zooming function on the touchpad working?
[13:32] <Doroff> ChogyDan onetime I used Knoppix. And Knoppix is worked. Whith what liveCd I can formated?
[13:33] <ChogyDan> baba_b00ie: ifup ifdown if you are using interfaces
[13:33] <maeki> baba_b00ie, ifconfig down eth0
[13:33] <ChogyDan> Doroff: ubuntu has a livecd
[13:34] <bigcx2> hey all...i rebooted today and lost all of my gnome configurations
[13:34] <bigcx2> wonderful way to start the day
[13:34] <bigcx2> and i was trying to set up my keyboard shortcuts
[13:34] <baba_b00ie> chogydan, thats what i thought. but i couldn't bring the the interfaces up or down. what about restarting the network services ?
[13:34] <bigcx2> and for some reason the gnome-keybinding-properties dialog isn't recognizing my super_l key?
[13:35] <baba_b00ie> something like /etc/init.d network down ?
[13:35] <bigcx2> any ideas? xev properly recognizes it
[13:36] <ChogyDan> baba_b00ie: Im not really sure, I just use nm.  Are you using ifup -a?    o well, looks like ya got it!
[13:36] <bigcx2> xmodmap tells me i have two super_l keys
[13:37] <bigcx2> is there any way to get rid of that????
[13:37] <abhi_nav> can I install add/remove in 9.10? USC is good. but I wll use it when it comes in version 3
[13:37] <ChogyDan> bigcx2: do you want to just use that key alone?   I can only use it as a modifier, like shift alt ctrl
[13:37] <kcantin> Hello everyone
[13:37] <bigcx2> ChogyDan: yea i just want to use Super_L to launch a terminal
[13:38] <bigcx2> ChogyDan: that's the way i had it before my gnome settings decided to crap out on me this morning
[13:38] <ChogyDan> bigcx2: I don't know.  I just use the Menu key myself
[13:38] <gabriele_> ciao!
[13:39] <kcantin> anyone here have experience in dealing with x gnome issues?
[13:39] <bigcx2> ChogyDan: gnome-keybinding-properties doesn't recognize that either
[13:39] <bigcx2> kcantin: ask more specific questions
[13:40] <kcantin> ok, thanks bigcx2
[13:40] <kcantin> ummmm, I have been trouble shooting the issues that I have been experiencing with my intel graphics card initially
[13:40] <soulscar> where is the file pxelinux.0 ?
[13:40] <smacky_> i wrote this very tiny script am trying to install it but chmod X dont work
[13:41] <kubi_ubi_bubi> Hello! Linux can be destroy physically the winchester if I use this with ntfs? Or can cause any problem?
[13:41] <kcantin> I cannot get a higher resolution than 800 X 600
[13:41] <ChogyDan> kubi_ubi_bubi: you need to use ext
[13:41] <llutz> smacky_: chmod +x script    lowercase x
[13:42] <kcantin> But, I have since learned that apparently it is an issue with x and gnome
[13:42] <kcantin> I was referred to a web site that offers a downloadable script called "resolution script"
[13:42] <ChogyDan> bigcx2: well, if your system crashed, maybe some of your files got corrupted.  It may be easiest to reinstall
[13:42] <bigcx2> ChogyDan: easier said than done
[13:43] <kcantin> so I downloaded it and ran it but, unfortunately my issue with screen resolution still exists
[13:43] <ChogyDan> bigcx2: do you have a separate /home?
[13:43] <bigcx2> ChogyDan: the weird thing is, my system didn't crash
[13:43] <kubi_ubi_bubi> ChogyDan: The only problem withthe ext is: Windows can't read them.
[13:43] <bigcx2> it shut off normally last night
[13:43] <kcantin> I would like to be able to at least run at 1024 X 768
[13:43] <bigcx2> and this morning, i lost ALL of my gnome settings
[13:43] <bigcx2> backgrounds, etc.
[13:43] <bigcx2> all my files were still present
[13:43] <kcantin> bigcx2, sorry to hear about that
[13:44] <ChogyDan> bigcx2: well _something_ went wrong, maybe there is a way to go back to the defaults?
[13:44] <nooga_> hi
[13:44] <bigcx2> ChogyDan: yea, not sure what that would be though!
[13:44] <theoo> i want to create a script which will restart the computer when 800mb of the 1gb RAM is used
[13:44] <nooga_> i can't update
[13:45] <soulscar> where is the file pxelinux.0 ?
[13:45] <bigcx2> kcantin: are you sure you're using the appropriate driver?
[13:45] <nooga_> i mean upgrade, it says that the distribution upgrade can be only pardial
[13:45] <nooga_> partial
[13:45] <ChogyDan> kubi_ubi_bubi: you still need to use ext.  Maybe you can make a smaller partition?  use a separate partition for files you want both windows and linux?
[13:45] <nooga_> it installs one packet and exits
[13:46] <x2xx2nd> HI.... im traying to convert a folder foul of flvs tou mp3 through the SoundConverter prog ... the thing is that, when i try to load the file to the converter , the program crushes after a while( it loads some and then it sthucks)... what sould i do???
[13:46] <senthil> Hi
[13:46] <ChogyDan> bigcx2: well, I do have a command in mind, but it is quite risky.  You would have to be prepared to reinstall anyway, as the command might make things worse
[13:47] <bigcx2> ChogyDan: ok, listening
[13:47] <smacky_> chmod: invalid mode: `x'
[13:47] <llutz> smacky_: what's your exact command?
[13:47] <ChogyDan> bigcx2: so you have all your data backed up?
[13:48] <senthil> i need a help
[13:48] <vertx> !ask > senthil
[13:48] <x2xx2nd> HI.... im traying to convert a folder foul of flvs tou mp3 through the SoundConverter prog ... the thing is that, when i try to load the file to the converter , the program crushes after a while( it loads some and then it sthucks)... what sould i do???
[13:48] <kcantin> bigcx2, according to ppl I have been chatting with on this channel, Yes
[13:48] <ChogyDan> !panels > bigcx2
[13:49] <BluesKaj> Hiyas
[13:49] <bigcx2> ChogyDan: i'm not going to run the command blindly, just curious as to what you're thinking
[13:49] <bigcx2> hm
[13:49] <ChogyDan> bigcx2: instead of /apps/panel  run it on just /                 btw, this is only a command to run blindly
[13:49] <kcantin> I have shipped my log files to pastebinit.com and everyone tells me that my vid card is installed correctly
[13:50] <bigcx2> might not be a bad idea
[13:50] <CR0W> Hello, I have a problem, in System>Administration>Time and Date when I change the day it changes back after about a second.
[13:50] <senthil> I have installed rpm using sudo apt-get install rpm.. But it runs till 99% after it shows error some file is access denied...
[13:50] <kcantin> the script that I was running uses xrandr
[13:50] <BluesKaj> Hiyas
[13:50] <senthil> so what can i do??
[13:51] <kubi_ubi_bubi> ChogyDan: I do not have Windows installed on my computer, I've kept the ntfs for the games, if i reinstall the windows. And I have the Get Data Back For Ntfs program... How can i recover my Computer in Ext?
[13:51] <senthil> hey guys or gals reply for my Q
[13:52] <x2xx2nd> does anybody know a good sound conversion program except the SoundCOnverter ?????!?
[13:52] <Pici> senthil: Can you pastebin the exact text of your error?
[13:52] <Pici> senthil: Are you using rpm to install an rpm package?
[13:52] <soulscar> where is the file pxelinux.0 ?
[13:52] <CR0W> Am Could someone answer my problem?
[13:53] <ChogyDan> kubi_ubi_bubi: I don't know of a program that can recover files off of ext
[13:53] <senthil> Just a min..
[13:53] <vertx> senthil: paste your error message(s) into paste.bin to let everyone see your exact problem
[13:53] <Slart> !recover
[13:53] <wasutton3-1> does anyone know of an adapter that takes a laptop atapi cdrom drive and turns it into a sata hard drive/
[13:53] <wasutton3-1> ?
[13:53] <senthil> Reading state information... Done
[13:53] <senthil> rpm is already the newest version.
[13:53] <senthil> 0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
[13:53] <senthil> W: Duplicate sources.list entry http://security.ubuntu.com karmic-security/universe Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_karmic-security_universe_binary-i386_Packages)
[13:53] <senthil> W: Duplicate sources.list entry http://security.ubuntu.com karmic-security/main Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_karmic-security_main_binary-i386_Packages)
[13:53] <FloodBot3> senthil: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[13:54] <Pici> senthil: Please use a pastebin and give us the link.
[13:54] <BluesKaj> !rpm | senthil
[13:55] <senthil> i cant get u pici:
[13:55] <Pici> senthil: Paste the text to http://paste.ubuntu.com and then give us the link.
[13:56] <CR0W> Hello, I have a problem, in System>Administration>Time and Date when I change the day it changes back after about a second.
[13:56] <CR0W> It's ubuntu 9.10
[13:56] <senthil> Hi ubottu as u said that alien is dangerous... But it  is not so
[13:57] <senthil> Then one more probs... I need restore my GNOME panel... What to do...??
[13:57] <Pici> senthil: ubottu is a bot.  We cannot support rpm packages that were installed using alien.
[13:57] <Pici> !resetpanels | senthil
[13:58] <lotfigood> Entrez le texte ici...bjr
[13:58] <senthil> thank u very much ubutto..!!!:)
[13:59] <lotfigood> bonjour a ts
[13:59] <CR0W> Hi, does anybody see me?
[13:59] <xuxin> yes CR0W
[13:59] <lotfigood> ca va les filles
[13:59] <lzy> and me?
[13:59] <CR0W> Could someone answer my problem?
[13:59] <senthil> Hey pici i have pasted that u said..
[13:59] <vertx> !fr | lotfigood
[14:00] <joshyfluff_> :V
[14:01] <senthil> Good night guys
[14:01] <joshyfluff_> Nini!
[14:01] <joshyfluff_> Is there a reason that as soon as I launch any application, the hard drive light will remain constantly on for about a minute, not allowing me to do anything?
[14:01] <test123> just a test
[14:01] <pjanecze_> hi, what's in your opinion best environment for php/html/css/js on ubuntu?
[14:02] <senthil> Then i need to install C & c++  COMPILER ... hOW TO DO THAT??
[14:02] <di3gopa> senthil, sudo apt-get install g++
[14:03] <vertx> senthil: sudo apt-get build-essentials
[14:03] <senthil> iT WILL INSTALL BOTH C & c++ AH
[14:03] <llutz> !caps | senthil
[14:04] <senthil> he he cool buddy
[14:04] <senthil> Hi di3gopa it show warning??
[14:04] <lanoxx> i just found that i dont have the file /etc/init.d/cups
[14:04] <lanoxx> or any other file with cups in its name, how can i start cups in karmic?
[14:04] <jin> hey guys i have on my xubuntu an lxde-desktop installed and now the wicd network manager won't work, everytime i start up this manager he closed after - can anyone help me pls thanks you forward
[14:05] <CR0W> Hi, can I ask a question?
[14:05] <eremite> !ask | CR0W
[14:05] <senthil> What??
[14:06] <adityag> where is grub.lst located in 9.10?
[14:06] <rsk> adityag nowhere
[14:06] <Roasted_> Is there a way to connect to mobile broadband if you're using a different application other than network manager?
[14:06] <senthil> I dunno...
[14:06] <CR0W> In System>Administration>Time and Date when I change the day it changes back after about a second. Why? What do I do wrong? Ubuntu 9.10 just isntalled.
[14:06] <rsk> adityag look for grub.conf
[14:06] <llutz> Roasted_: umtsmon, wvdial
[14:06] <lanoxx> can anyone tell my why i dont have a cups file in init.d
[14:06] <lanoxx> and how i can get it back
[14:06] <adityag> rsk: which directory?
[14:07] <Roasted_> llutz, wvdial = Gnome PPP?
[14:07] <senthil> Hi follow the link for GRUB:::::::        http://www.redhat.com/docs/manuals/linux/RHL-7.2-Manual/ref-guide/ch-grub.html
[14:07] <llutz> Roasted_: idk, wvdial is a cli-tools
[14:07] <llutz> tool*
[14:07] <Roasted_> llutz, a search of wvdial in the software center brings up Gnome PPP
[14:08] <llutz> Roasted_: maybe its a frontend to wvdial, idk
[14:08] <CR0W> Could someone at least check if this problem occurs in his ubuntu 9.10?
[14:08] <miraculix> adityag: I recommend giving this link a read >> https://wiki.ubuntu.com/Grub2
[14:08] <senthil> noop
[14:08] <abhi_nav> CR0W: which program?
[14:08] <meo_> hi
[14:08] <CR0W> abhi_nav System>Administration>Time and Date
[14:09] <senthil> Hi
[14:09] <CR0W> abhi_nav can't change date.
[14:09] <abhi_nav> CR0W: yes, I have that Time and Date in 9.10
[14:09] <Sno0py_> question how can i tell if my laptop is capable of running 64 bit os?
[14:09] <vertx> CR0W: I don't have your problem. I'm using 9.10
[14:10] <CR0W> abhi_nav You mean you have this problem too?
[14:10] <baba_b00ie> would this be the proper channel for ubuntu server discussions ?
[14:10] <pssw0rt> someone knows a program that handles all file extensions and what programs are open to those
[14:10] <abhi_nav> CR0W: NO, I mean yes, I have that Time and Date application installed here in  my 9.10
[14:10] <DJones> baba_b00ie: You can ask here, or maybe try in #ubuntu-server
[14:11] <CR0W> abhi_nav but I mean, can you change the date and the choice stays, i.e. in my ubuntu it changes back after a second.
[14:11] <noren> hi all
[14:12] <Sno0py_> question how can i tell if my laptop is capable of running 64 bit os?
[14:12] <abhi_nav> CR0W: let me check
[14:12] <noren> Is there any app which i can use for voice to text conversion
[14:12] <CR0W> abhi_nav I'll appreciate
[14:12] <baba_b00ie> i'm debating on building my first ubuntu server. was wondering if someone could point me in the right direction. www sites/documentations. the server would be a file server and i need it to share with my xbox 360
[14:12] <Sno0py_> i did lshw and the cpu memory are listed as 64 bit, dose that mean i can run 64 bit os?
[14:13] <llutz> CR0W: i don't know about your problem, but a user shouldn't be able to change time/date
[14:13] <CR0W> llutz I mean after you unlock
[14:13] <noren> Sno0py_: u need to have a 64 bit processor, try booting with 64bit live cd ~~!!
[14:13] <adityag> miraculix: rsk: i dont want to show one of the OS in the selection list, but i cant edit grub.cfg, any other solution ? i tried sudo gedit
[14:13] <Sno0py_> ok
[14:14] <abhi_nav> CR0W: hmm its working. I encuntered a new prob that my mouse pointer hangs. only mouse hangs. and then i do things with keyboard. then my time dont change immidiatly. I click on that time on gnome panel then ti changes
[14:14] <lanoxx> can anyone tell me how i get my cups running again?
[14:14] <abhi_nav> CR0W: now wait let me first set it back to original
[14:15] <noren> lanoxx: sudo /etc/init.d/cups restart
[14:15] <meo_> who is lana?
[14:15] <BulleTh0> How to disable NAT ?
[14:15] <jmcantrell> using the encrypted private directories (https://help.ubuntu.com/community/EncryptedPrivateDirectory), does it get unlocked when you ssh instead of logging in directly?
[14:16] <lanoxx> noren, cant there is no cups file
[14:16] <tio> ke venga alguien
[14:16] <lanoxx> noren, any idea?
[14:16] <miraculix> adityag: you could technically edit /boot/grub/grub.cfg but that would get overridden everytime grub is update. All the files related to generating the grub menu can be found in /etc/grub.d/
[14:16] <noren> lanoxx: did u had it installed in the first place if not do sudo apt-get install cps
[14:16] <abhi_nav> CR0W: hmm done
[14:17] <adityag>  i dont want to show one of the recovery OS in the selection list, but i cant edit grub.cfg, any other solution ? i tried sudo gedit
[14:17] <llutz> lanoxx: sudo aptitude reinstall cups
[14:17] <CR0W> abhi_nav what could be wrong that It doesnt work for me?
[14:17] <lanoxx> noren, yes it used to work, but i dont print much so i can tell when it stopped working, maybe on the last upgrade from jaunty to karmic
[14:17] <Pirate_Hunter> data that goes in /tmp/ does it ever go back into the filesystem afterwards or do they remain and get deleted on shutdown?
[14:17] <lanoxx> noren, and cups and everything cups related is installed and i reinstalled it twice with aptitude and apt-get
[14:18] <miraculix> adityag: that is quite easy edit >> /etc/default/grub and uncomment the recovery=true entry
[14:18] <lanoxx> llutz, no success
[14:18] <lanoxx> llutz, it reinstalls but the problem persists
[14:18] <miraculix> adityag: you need to run: sudo update-grub (after that)
[14:18] <CR0W> where is 'time and date' save its settings?
[14:18] <CR0W> I want to check permissions
[14:18] <noren> lanoxx: if u have hp printer better get the hplip !!
[14:19] <abhi_nav> CR0W: cant say. But I have strange prob in my 9.10 too. e.g. when I just click on Authenticate button then it dont understand and remain as it is then i click it with force then it know. and if click with force then it understnads at one attempt! so my suggestion is this may be 9.10 bugs, better try launchpad for bug solution
[14:19] <noren> lanoxx: can help if u tell me some info of ur printer
[14:19] <lanoxx> noren, cupspdf
[14:19] <lanoxx> noren, cups is not running at all
[14:20] <fupp> how do I make configure reapper after I apt-get install something and then the configure screen won't reapper if I try to install again
[14:20] <lanoxx> noren, and i can not start it because there is no file names cups in /etc/init.d/
[14:20] <lanoxx> noren, or is there a different way to start it
[14:20] <noren> !cups | lanoxx
[14:20] <adityag> miraculix: sudo gedit  /etc/default/grub ?
[14:21] <miraculix> adityag: yes
[14:21] <lanoxx> noren, i cant even get so far as to configure a new printer in the first place because the printer icon is greyed out, and i get a message that cups is not running
[14:22] <noren> lanoxx: oh ok ! try sudo apt-get remove --purge cups && sudo apt-get install cups
[14:22] <adityag> miraculix: this recovery option is for windows 7, not for linux
[14:23] <razz1> I am trying to set up a remote connection between two ubuntu systems, using ssh and vnc
[14:23] <lanoxx> The following packages will be REMOVED:
[14:23] <lanoxx>   bluez-cups* cups* cups-driver-gutenprint* cups-pdf* foo2zjs* foomatic-db* foomatic-db-engine* ghostscript-cups* hpijs* hplip* openprinting-ppds* pxljr* splix* ubuntu-desktop* ubuntu-netbook-remix*
[14:23] <rocket16> Visual Basic exe files do not run even in latest wine. Why so?
[14:23] <lanoxx> ubuntu-desktop ? ubuntu-remix?
[14:23] <miraculix> adityag: oh, sorry. I misunderstood what you wanted
[14:23] <razz1> I need help setting up ssh
[14:23] <lanoxx> noren, can that be right?
[14:23] <llutz> rocket16: ask microsoft
[14:23] <adityag> miraculix: np....what can be the solution ?
[14:23] <switchgirl1> what do i need to talk to an apple osx from ubuntu?
[14:24] <noren> i see u already have all the required files !! just try rebooting !!
[14:24] <miraculix> adityag: What exactly is the name of the entry? I'm unfamiliar with any Windows 7 recovery entries
[14:24] <rocket16> llutz: Good joke. That is similar to asking them to shoot Billy Goat (Bill Gates=Bozo the Clown)
[14:24] <switchgirl1> !osx
[14:24] <switchgirl1> !apple
[14:24] <llutz> rocket16: no joke at all
[14:25] <rocket16> llutz: Really?
[14:25] <switchgirl1> !network
[14:25] <switchgirl1> !help
[14:25] <sergep71> Anyone here familiar getting a bt878 video capture card to play nice?
[14:25] <switchgirl1> !itunes
[14:25] <abhi_nav> hmmm hi all
[14:25] <rocket16> I think this is something like Silverlight. Earlier it wasn't possible for Linux to open www.microsoft.com, but now we can.
[14:25] <llutz> rocket16: wine is just a compatibility layer, nobody ever said all windows-crap will run with it
[14:25] <noren> switchgirl1: what exactly are u looking for
[14:25] <rocket16> llutz: I hate everything in Windows, but VB is no crap\
[14:26] <hanthana> how to update a software using several .deb files?
[14:26] <adityag> miraculix: http://www.privatepaste.com/d8c16332ad the second last 1
[14:26] <lanoxx> noren, that worked, although i was quite suprised why it told me that ubuntu-desktop would be removed, it didnt remove it, and now it works after reinstalling it
[14:26] <llutz> rocket16: and, jm2c, if you need running win-apps, use windows
[14:26] <lanoxx> noren, thanks alot
[14:26] <rocket16> llutz: Not really, I don't want to use it. I simply code VB sometimes, and thanks for you "ask microsoft" joke
[14:26] <noren> lanoxx: ur welcome i think there was something wrong with the cups configuration
[14:27] <switchgirl1> i have an old apple system i want to use as a server to get round the copy right software and emulation issues (like legally downloading free podcasts from itunes without emulation) so i need a basic osx config where it sucks stuff from itunes and stores them on my ubuntu pc
[14:27] <switchgirl1> via daap or networking
[14:27] <lanoxx> noren, probably, but i wonder why simply reinstalling didnt work
[14:27] <noren> hanthana: please be more specific !! use sudo dpkg -i <file.deb>
[14:28] <wols> switchgirl1: mount a smaba share on OSX which is located on your ubuntu host
[14:28] <noren> lanoxx: simple reinstall does not remove the old config file thats why we used purge it remove completly
[14:28] <Krystal``-Away> I tend to keep getting errors with booting
[14:28] <sergep71> any alternate irc channel to try for video capture card help?
[14:29] <hanthana> noren: downloaded OO.org 3.2 (several deb files), in fedora i can use rpm -Uvh <name>.rpm to update existing Oo.org 3.0
[14:29] <Krystal``-Away> Try hd(0,0): NTFS5: No wubildr
[14:29] <hanthana> noren: how to do this in ubuntu?
[14:29] <lanoxx> noren, alright, i will remember this
[14:29] <Krystal``-Away> Try hd(0,1): NTFS5:
[14:29] <ProfessorBacon> i have a window share i'd like to manipluate in bash, but the share doesn't show up in the list of mounted devices in 'mount'.  how does ubuntu automatically mount windows shares?  is there a way I can interact with one that has been mounted with the connect to server dialog in bash?
[14:29] <hanthana> noren: i don't use Ubuntu but need to support OO.org user
[14:29] <adityag>  miraculix: http://www.privatepaste.com/d8c16332ad the second last 1
[14:30] <Rafael_> i need help with Webmin: si coloco https://xxx.xxx.x.xx:10000 i can see webmin, but if i place  https://hostname:10000 nothing..can somebody please help me?
[14:30] <miraculix> adityag: I don't see any recovery entries that are related to windows 7 here. I see 2 entries for 2 Windows OS (Vista & 7)
[14:31] <llutz> !webmin | Rafael_: check your dns
[14:31] <adityag> miraculix: the entry for vista is for recovery, dont know they named this way
[14:31] <Krystal``-Away> Try hd(0,0): NTFS5: No wubildr (Ubuntu 9.10 ontop of Windows Vista Basic )
[14:31] <noren> hanthana: put all the file in the single folder and then sudo dpkg -i file.deb
[14:31] <bella-vampire> hola
[14:32] <hanthana> noren: -i for install ? or update?
[14:32] <miraculix> adityag: Oh...
[14:32] <bella-vampire> hay algún español aqui
[14:32] <adityag> miraculix: any solution now?
[14:32] <Pici> !es | bella-vampire
[14:33] <Bageshwar> anybody .. hadoop+karmic ?
[14:33] <Pici> hanthana: It doesn't matter, if the package is already installed and you're trying to install a version that has a higher version number then it will upgrade.
[14:33] <noren> hanthana: -i for install
[14:33] <Pici> !anyone | Bageshwar
[14:34] <miraculix> adityag: Not an immidiate one that follow the grub2 standard. Since I have to look into the os-prober script a bit more
[14:34] <hanthana> Pici: noren thanks guys! :)
[14:34] <hanthana> cya
[14:34] <abhi_nav> Bageshwar: what is hadoop?
[14:34] <WWEE> tar cjv -C $HOME/html --exclude=./_file_backups --exclude=./hostedsites . | openssl des3 -salt -k password >$HOME/html/_file_backups/$NOWDATE.enc
[14:34] <WWEE> echo "Backup complete!"
[14:35] <WWEE> what would be the command to decrypt the above?
[14:35] <abhi_nav> WWEE: see if truecrypt supports command line operation
[14:35] <Krystal``-Away> Anyone know how to fix booting problem: Try hd(0,0): NTFS5: No wubildr
[14:36] <AJC_Z0> I don't think echo encrypts the putput
[14:36] <abhi_nav> haa haaha haa wht is putput?
[14:36] <candela> candela.1998@hotmail.es
[14:36] <abhi_nav> "putput" !!!!
[14:37] <AJC_Z0> It's what USAians call Crazy Golf
[14:37] <Krystal``-Away> Anyone know how to fix booting problem: Try hd(0,0): NTFS5: No wubildr
[14:37] <abhi_nav> hmm
[14:37]  * AJC_Z0 notices he's in the wrong group
[14:37] <maco> AJC_Z0: goofy golf
[14:37] <abhi_nav> Krystal``-Away reinstall grub
[14:38] <maco> and itd be puttputt as the verb in golf is putt not put
[14:38] <Krystal``-Away> abhi_nav: If I could I would.. it doesn't let me go pass the grub/bash command prompt.
[14:39] <abhi_nav> Krystal``-Away from livecd
[14:39] <tremby> how do i upgrade Ubuntu Server to the latest? currently Hardy
[14:39] <adityag> any1 used to grub2 standard?
[14:40] <noren> !grub | Krystal``-Away
[14:40] <abhi_nav> !server | tremby
[14:40] <tremby> thanks
[14:41] <Krystal``-Away> Windows was on before Ubuntu
[14:41]  * DJones wonders whether trembly realised that hardy was a LTS version and that the next LTS hasn't been released yet
[14:41] <Krystal``-Away> This is wubi.
[14:41] <CR0W> I think I found whe problem.
[14:41] <noren> is there speech to text solution in ubuntu
[14:42] <CR0W> /usr/bin/locale/pl_PL.UTF-8/LC_TIME not found
[14:42] <Slart> noren: yes.. there are several options.. festival is one, I think.. then there's espeak and others as well
[14:42] <abhi_nav> CR0W:?
[14:42] <adityag> any1 used to grub2 standard?
[14:43] <noren> Slart: i know them but not sure if they work other way {speech to text }
[14:43] <salvachn> Slart, you might try CMU's Sphinx project
[14:43] <Slart> noren: oh.. sorry.. by bad.. I read it as text to speech.. I don't know of anything that goes the other way
[14:44] <Slart> noren: try salvachn's suggestion.. CMU's Sphinx project
[14:44] <Bageshwar> ubottu: sure thnx !
[14:44] <noren> Slart: lemme check it out
[14:44] <Bageshwar> does anybody have experiences with hadoop on ubuntu desktops/servers
[14:44] <DJones> noren: There isn't very much, you can have a look at https://wiki.ubuntu.com/SpeechRecognition but it doesn't really suggest any specific app's other than the Julius and Sphinx engines
[14:45] <Ashok> hi i hv installed java in ubuntu 9.10 now i need to run the program can  som one tel how
[14:45] <adityag> any1 used to grub2 standard?
[14:45] <miraculix> adityag: The solution I've found is to remove the /etc/grub.d/30_os-prober script and then manually adding Windows entry you want inside /etc/grub.d/40_custom
[14:45] <Krystal``-Away> Try hd(0,0): NTFS5: No wubildr (Ubuntu 9.10 ontop of Windows Vista Basic ) [wubi issue]
[14:45] <noren> DJones: i am trying to find any app if it can read frm mp3 and output the test
[14:45] <noren> text
[14:45] <adityag> miraculix: ok cool....let me try
[14:45] <CR0W> Where can I post a bug in ubuntu?
[14:46] <geekphreak> hi all
[14:46] <Pici> CR0W: http://bugs.ubuntu.com
[14:46] <geekphreak> how is everyone :)
[14:46] <CR0W> Pici thx
[14:46] <adityag> miraculix: should i take any backup of grub, because if this does not work, i'll have to reinstall sin7
[14:46] <Bageshwar> Ashok: same as in windows....
[14:47] <miraculix> adityag: just backup /etc/grub.d/30_os-prober to a location just in case
[14:47] <DJones> noren: I've not heard of anybody being able to do that unless you can find something linked from that speech recognition page
[14:48] <razz1> I am trying to set up remote connection between two ubuntu systems, I installed the ssh clinet and server and vnc server and client, I need help port forwarding and setting up public and private keys. anyone willing to help?
[14:49] <Ashok> bageshwar:where to type the code
[14:49] <miraculix> adityag: this is how your /etc/grub.d/40_custom file should look like after the changes http://privatepaste.com/46368274d3
[14:50] <feisar> Anyone know anything about the printers on HP's website now as far as Linux compatibility goes? I am looking at the HP Photosmart All-in-One (Q8433B)
[14:50] <llutz> feisar: check the printer-database at linuxprinting.org
[14:51] <Ashok> hello any one help me where to type the java code and run
[14:51] <noren> feisar: get hplip sudo apt-get install hplips
[14:51] <Bageshwar> Ashok: you can use gedit
[14:52] <Bageshwar> Ashok: there are numerous text editors available.. gedit is much like notepad...
[14:52] <Ashok> bageshwar:k thx sir
[14:52] <geekphreak> Ashok: you can also do apt-get install jedit
[14:52] <feisar> llutz: thanks but the model number doesn't seem to be there (yet)
[14:52] <geekphreak> add sudo ^^
[14:52] <Bageshwar> Ashok:  save the file as .java , and use the java <class>.java to compile and den run
[14:52] <Ashok> geekphreak: give me the code to run it
[14:52] <Bageshwar> do check where you installed java....
[14:52] <feisar> the new hp's seem to have odd numbers eg.Q8433B
[14:53] <geekphreak> Ashok: sudo apt-get install jedit
[14:53] <soulscar> pxe ubuntu is giving me a  black screen does some one knows what is this ?
[14:53] <geekphreak> Ashok: keep in mind, everyone has there own choice of editors ;)
[14:53] <sagar> Ashok, or use geany nice text editor
[14:53] <geekphreak> sagar: i agree, thats nice too
[14:53] <Dr_Willis> Ashok:  i mentioned geany earlier. :) its a good text editor
[14:54] <Bageshwar> the simplicity of gedit is nice though !
[14:54] <sagar> ycomes with a snippets so can modify to your ease
[14:54] <Ashok> sagar:wr i need to search for geany
[14:54] <Dr_Willis> the lack of features in gedit.. is annoying. :)
[14:54] <geekphreak> Ashok:  no
[14:54] <sagar> Ashok, terminal sudo >> apt-get install geany
[14:54] <Dr_Willis> it pays to read the geany docs also  some features are easially overlooked
[14:54] <geekphreak> Ashok: sudo apt-get install jedit geany
[14:54] <Dr_Willis> !info geany
[14:55] <geekphreak> thank you Dr_Willis  :)
[14:55] <sagar> Ashok, or you can install the latest version from ppa as well
[14:56] <AnAnt> Hello, how can I concat several PDF documents together in a single PDF document ?
[14:56] <Bageshwar> anybody did FAI+Ubuntu9.10 and Hadoop+Ubuntu9.10 ?????
[14:57] <Bageshwar> AnAnt: does it have to be necessarilyon ubuntu
[14:57] <Bageshwar> necessarily on*
[14:57] <AnAnt> Bageshwar: well, I'm using Ubuntu
[14:57] <srini> difference between env and set command
[14:58] <Ashok> sagar, what is ppa
[14:58] <Dr_Willis> !ppa | Ashok
[14:58] <Dr_Willis> Ashok:   a way to get new/unsupported/testing pakages
[14:58] <Bageshwar> AnAnt: hmm.. well i use a tool PrimoPDF for windows( virtual printer.. mayb  a virtual pdf printer for ubuntu might be the solution
[14:58] <sagar> Ashok, here you go https://launchpad.net/~geany-dev/+archive/ppa
[14:58] <meghan> hi
[14:59] <dgt84> hey, how can I edit the applications that show up in the nautilus "open with" dialog?
[14:59] <dgt84> It's easy in Windows but I can't figure it out in Ubuntu
[14:59] <noren> AnAnt: use PDFtk in ubuntu to join multiple pdf
[14:59] <geekphreak> its srange though ubuntu did not add eclipse-pdt to repo :(
[14:59] <meghan> ello
[14:59] <geekphreak> meghan: hello
[15:00] <meghan> how r ya
[15:00] <sagar> dgt84, go to properties and theer  you have open with options
[15:00] <Bageshwar> !FAI
[15:00] <sudo> hello boys
[15:00] <meghan> i am a girl
[15:00] <meghan> !!!!
[15:00] <sudo> sorry meghan
[15:00] <dgt84> sagar, yeah I see that but I cannot edit the entries in the list!
[15:00] <geekphreak> dgt84:  tell me something
[15:00] <cracker> guys when i type gpg --fingerprint i get nothing
[15:00] <maco> meghan: good for you?
[15:00] <geekphreak> dgt84:  you basically wana parint page to file , right?
[15:01] <maco> cracker: then nothing's in your keyring
[15:01] <computer_> hi i need help
[15:01] <cracker> ok maco
[15:01] <geekphreak> print even *
[15:01] <dgt84> geekphreak, no, I want to edit the list of applications that I can choose in the open with dialog
[15:01] <noren> !help | computer_
[15:01] <AnAnt> noren: thanks
[15:02] <sagar> dgt84, just add the application on cammand
[15:02] <r0n> Hello where do I go to help with bug fixes?
[15:02] <fabionelson> hi
[15:02] <geekphreak> ok
[15:02] <fabionelson> I need some help
[15:02] <meghan> y
[15:02] <noren> AnAnt: ur welcome
[15:02] <computer_> i have jus upgraded to 9.1 from xandros...need help for activating camera..im using eeepc 701
[15:02] <sudo-su> hello boys and girls ( meghan )
[15:02] <meghan> lol
[15:02] <meghan> haha
[15:02] <AnAnt> noren, Bageshwar: someone just told me about a utility called pdfjoin
[15:02] <sudo-su> i want run ubuntu 9.10 from my system
[15:03] <sudo-su> 10.04
[15:03] <maco> sudo-su: not like she's the only one :P
[15:03] <fabionelson> yesterday I change my Ubuntu 9.10 to Ubuntu 9.10 AMD64 (my cpu is a Athlon 64 X2 5600)
[15:03] <Pici> sudo-su : Please join #ubuntu+1 for Lucid/10.04 support/discussion.
[15:03] <doubaofantuan> just is a test
[15:03] <sudo-su> but 9.10 is real
[15:03] <dgt84> sagar, adding a command works for a single file type, but if I want to edit e.g. 20 file types it sucks to type that all in manually, was wondering if I can edit just one entry to update all those file formats
[15:03] <computer_> also im not able to play music and video files..where can i get codecs online
[15:03] <FriedrichMan> hello there guys
[15:03] <Bageshwar> AnAnt: yupp.. saw dat..
[15:03] <FriedrichMan> I have a question about msmtp
[15:03] <noren> AnAnt: there are many pdftk is in the repos... so u can get it easily by sudo apt-get install pdftk
[15:03] <maco> ...and gals
[15:03] <fabionelson> since I did it, grub is very slow to load the boot list
[15:04] <FriedrichMan> does it keep a log of the mails it sends?
[15:04] <fabionelson> so I tried change to Grub 2, as sugest in updating
[15:04] <fabionelson> and the problem continues
[15:04] <sudo-su> Pici: how name is?
[15:04] <miraculix> computer_: sudo apt-get install ubuntu-restricted-extras | that should install most codecs needed to play most video and music files
[15:04] <Pici> sudo-su: I don't understand what you're asking.
[15:05] <razz1> I am getting very long boot time after changing monitors and enabling Nvidia Accelerated Graphics Driver. Any help
[15:05] <sudo-su> Pici: as the name of that channel?
[15:05] <Pici> sudo-su: #ubuntu+1
[15:05] <sudo-su> for lucid
[15:05] <fabionelson> anyone knows what's the problem in grub on AMD64?
[15:05] <sudo-su> ok
[15:06] <maco> fabionelson: its gotta be a bit more specific than just using amd64 as grub1 and grub2 both work with my amd64 system
[15:06] <miraculix> razz1: I had the same problem after installing the Nvidia drivers. But after a couple of reboots it was back to normal speed.
[15:07] <noren> !multimedia
[15:07] <fabionelson> maco: I haven't problems with grub on ubuntu 32 bits
[15:07] <razz1> my systems boot time is more than 10 min, and this is my second boot, I am actually not using the proprietory drivers but the generic ones
[15:07] <fabionelson> yesterday, I changed for Ubuntu 64
[15:08] <sagar> razz1, install bum and manage your boots
[15:08] <fabionelson> then grub is very slow to load the boot list
[15:08] <razz1> Miraculix: by the way I am on 8.04
[15:08] <fabionelson> I think was a problem in grub 1
[15:08] <fabionelson> so I decided change to grub 2
[15:08] <FriedrichMan> so?... does anybody know about the msmtp logs?
[15:09] <razz1> sagar: grub loads quickly its ubuntu that's very slow to get to the login screen
[15:09] <fabionelson> but the problem still there! =/
[15:09] <fabionelson> grub is slow to load the boot list... when the boot list is loaded, it's work great
[15:10] <farciarz84> how can I stop apache permanently?
[15:10] <hub_cap> How is root=UUID... calculated or determined?
[15:10] <geekphreak> farciarz84: uninstall it :p
[15:10] <wviker> uninstall it?
[15:10] <wviker> (:
[15:10] <farciarz84> no I want to stop it and start
[15:10] <farciarz84> not uninstall
[15:11] <geekphreak> farciarz84: sudo apt-get install rcconf
[15:11] <Slart> farciarz84: doesn't  "sudo service apache stop" work?
[15:11] <geekphreak> then use rcconf to disable apache from startup :)
[15:11] <wviker> :)
[15:11] <mn> hola
[15:11] <sagar> farciarz84,  rc-update.d -f remove apache3
[15:11] <Slart> farciarz84: that isn't permanent though.. I think it has to be run on each reboot
[15:11] <di3gopa> mn: hola
[15:11] <sagar> *2
[15:11] <fabionelson> santo deus! ninguém sabe o q tah acontecendo nao? =/
[15:11] <sagar> :D
[15:12] <farciarz84> sudo /etc/init.d/apache2 stop doesn't work, sudo service apache stop either
[15:12] <mn> capullo
[15:12] <Pici> !br | fabionelson
[15:12] <geekphreak> farciarz84: its apache2
[15:12] <farciarz84> geekphreak: yes
[15:13] <geekphreak> sudo service apache2 stop
[15:13] <sagar> farciarz84, go to /etc/init.d
[15:13] <sagar> farciarz84,  and run the script I gave you with apache2
[15:13] <ProjectxSorrow> scripting where its at
[15:14] <sagar> farciarz84, its update-rc.d sorry for the typo
[15:15] <llutz> sagar: update-rc.d will just remove the rc?.d links, it will not start/stop anything
[15:15] <farciarz84> there is nothing like rc-update.d
[15:15] <farciarz84> ah sorry
[15:16] <seli> hola
[15:16] <sagar> foes he want to stop it at boot time or wants to stop it
[15:16] <sagar> do*
[15:16] <geekphreak> sagar:  nice name :)
[15:16] <Bob_McLoser> ~join #mcgill-2
[15:16] <seli> no se ablar tu idioma
[15:16] <llutz> sagar: and btw, the links will be recreated with next apache2-update
[15:16] <gravyface> how come unprivileged users can change System -> Preferences -> Startup Applications?  I've removed all privileges except for "Mount user-space...", "use Audio..." and "use Video...".  I just want a stripped down user that can only run userland applications (browser, remote desktop client, etc.).
[15:16] <sagar> geekphreak, thanks :))
[15:17] <geekphreak> :p
[15:17] <Pici> gravyface: Because those only affect what runs when that user logs in.
[15:17] <PanTerra> hi
[15:17] <farciarz84> sagar: your adivce won't help me, still apache there
[15:17] <PanTerra> anyone experience with mnogosearch ?
[15:17] <Trek> gravyface: because startup apps are under preferences not admin, and only affect that user's startup (i.e. it runs whatever is listed there when the user logs on)
[15:17] <sagar> farciarz84, /etc/init.d/apache2 stop
[15:18] <gravyface> Pici: ok, so those startup processes actually run as that user or as root/another user?
[15:18] <llutz> farciarz84: sudo apache2ctl stop
[15:18] <fabionelson> Pici: I talkin ing English, but no one answer me!
[15:18] <PanTerra> I need to enable mnogosearch-php but cant find the packet
[15:18] <geekphreak> sagar: add sudo to it ;)
[15:18] <Pici> fabionelson: That doesn't mean that its time to talk in another language. Please be patient.
[15:18] <raph_ael> hi, i can'tfind any cabal (haskell cpan alike) package, what can i do ?
[15:18] <Pici> gravyface: They run as that user.
[15:18] <gravyface> I'm trying to make a "thick" thin client -- remote desktop, browser only, etc.  Next up is editing the default Gnome menu.
[15:19] <gravyface> thanks for your help, Pici
[15:19] <Trek> fabionelson: this moves fast here, so please be patient, someone will get to you eventually.  you can try one of the channels in your language though
[15:19] <stsm> can i somehow say to NOT load a script in /etc/init.d/ ? (the one for apache2)
[15:19] <farciarz84> still apapche here
[15:19] <fabionelson> I tried
[15:20] <geekphreak> fabionelson: use rcconf man
[15:20] <llutz> stsm: sysv-rc-conf
[15:20] <fabionelson> and no one knows hou to fix, there...
[15:20] <geekphreak> fabionelson:  sudo apt-get install rcconf
[15:20] <Pici> gravyface: You may want to look into the sabayon (not the distro) and pessulus packages if you intend to lockdown the Gnome desktop.
[15:20] <geekphreak> fabionelson:  then type sudo rcconf , unchk apache2 :p
[15:21] <Slart> ahem.. fabionelson != farciarz84
[15:21] <stsm> llutz, any good documentation about it? cant find aomething
[15:21] <llutz> !find sysv-rc-conf
[15:21] <geekphreak> Slart: oops :)
[15:21] <llutz> !info sysv-rc-conf
[15:21] <llutz> stsm: ^^
[15:22] <fabionelson> rcconf?
[15:22] <stsm> lol wsell i found that much :D
[15:22] <geekphreak> wb sagar
[15:22] <stsm> haha
[15:22] <Slart> fabionelson: I haven't run a 32bit ubuntu in a while.. but I don't think I have a delay problem before the grub list appears.. how long is the delay? 5 secs? 30 secs?
[15:22] <sagar> geekphreak, thanks
[15:22] <geekphreak> stsm:  match of?
[15:22] <fabionelson> 30 secs, or more
[15:23] <stsm> geekphreak, sorry i have no idea what you mean
[15:23] <geekphreak> ok lol
[15:23] <Slart> fabionelson: ouch.. and you didn't change anything else when you reinstalled ubuntu? no BIOS settings?
[15:23] <fabionelson> no
[15:23] <geekphreak> fabionelson: how old is the drive?
[15:23] <hub_cap> leave
[15:24] <eremite> fabionelson: was it always slow or did it gradually get slower? Does your computer meet the recommended system requirements?  A slow CPU and low RAM could cause slow boot times.
[15:24] <PanTerra> anyone knows how to enable the mnogosearch-php in php
[15:24] <sagar> hey anyone knows a recovery software in ubuntu
[15:24] <stsm> llutz, i found info about it, but it doesnt seem to be about /etc/init.d right :s
[15:24] <fabionelson> it's happens
[15:25] <stsm> llutz, it seems to be to start and stop services
[15:25] <sagar> one that recovers ntfs data
[15:25] <fabionelson> when I changed Ubuntu 32 bits to 64 bits
[15:25] <llutz> stsm: /etc/init.d holds the start/stop-syripts
[15:25] <fabionelson> my cpu is a Athlon 64 X2 5600
[15:25] <llutz> scripts
[15:25] <PanTerra> @sagar try to find hirens boot cd
[15:25] <PanTerra> getdatabackntfs
[15:25] <fabionelson> and the hard drive is ok
[15:25] <stsm> llutz, yes i know, so what if i dont want to start apache2 anymore?
[15:25] <llutz> stsm: disable it in scsv-rc-conf
[15:26] <llutz> stsm: and hope that upstart respects it too
[15:26] <fabionelson> the system loads very fast... but only the boot list take a lot of time
[15:26] <stsm> llutz, from the screenshot i'm looking it its just to start / stop services at  the moment (but im not sure because i never used it)
[15:27]  * geekphreak sits quietly lol
[15:27] <llutz> stsm: no it doesn't
[15:27] <fabionelson> when the boot list is load, take 9 secs to load the OS (I didn't change the grub)
[15:27] <stsm> llutz, lol let me take a look at it then sorry
[15:27] <fabionelson> (*grub settings)
[15:27] <PanTerra> does anyone knows where the mnogosearch-php went ?
[15:28] <PanTerra> ubuntu server 9.10
[15:28] <Slart> fabionelson: this looks promising http://www.mail-archive.com/bug-grub@gnu.org/msg12141.html
[15:29] <xor_mabuse> how do you get the symbols for closing, minimizing and resizing from the top left of every window to the right? i installed Ubuntu 10.04 beta1
[15:29] <sagar> PanTerra, its not free is it ?
[15:29] <Dr_Willis> fabionelson:  i got one box here where GRUB takes like 30 sec to get to the main GRUB menu - but i do have like 5 hard drives..
[15:29] <KB1JWQ> !lucid | xor_mabuse
[15:30] <PanTerra> @sagar on hirens boot cd it is usable
[15:30] <Tamnakz> Anyone else having problems with Gmail throuh evolution?
[15:30] <geekphreak> Tamnakz: nope
[15:31] <abhi_nav> no
[15:31] <WWEE> tar cjv -C $HOME/html --exclude=./_file_backups --exclude=./hostedsites . | openssl aes-256-cbc -salt -k password >$HOME/html/_file_backups/$NOWDATE.enc       <[15:31] <meoblast001> hi, what package contains the program, mkinitrd.. i'm trying to recompile my kernel and can't find that package
[15:31] <fabionelson> Slart: this link seems to be my case... my MBR is in SDA, and my Ubuntu boot in SDB
[15:31] <PanTerra> nobody knows the mnogosearch-php ?????
[15:31] <Slart> PanTerra: last time I checked Hirens Boot Cd was using software it didn't have any rights to distribute.. don't recommend it here
[15:32] <fabionelson> weird, cause in Ubuntu 32 it's work great
[15:32] <FriedrichMan>  does anybody know about the msmtp logs?
[15:32] <PanTerra> @slart sorry I wont anymore
[15:33] <llutz> WWEE: openssl < yourfile.tar|tar -xjf -  -C /destdir                           or something like that
[15:33] <WWEE> thanks
[15:33] <BluesKaj> PanTerra, the @ command doesn't work on irc
[15:33] <llutz> WWEE: options to be taken from man-pages
[15:34] <PanTerra> i didn`t want to use a command
[15:34] <geekphreak> BluesKaj: just a pointer, talking to @name
[15:34] <WWEE> doesnt seem to work
[15:35] <Slart> @slart, slart:, ((slart)), .:Slart is the greatest:.  they all highlight in my client =)
[15:35] <geekphreak> lol
[15:35] <PanTerra> do you have any experience with the mnogosearch?
[15:36] <Pici> !who
[15:38] <JT> can u help me
[15:38] <Slart> !ask | JT
[15:38] <JT> thanks
[15:39] <hdon> hi all. how can i change the font used to display the conversation  in xchat?
[15:39] <JT> ubottu can u tell me how to get the quility on google pics
[15:40] <geekphreak> JT: get what?
[15:40] <JT> the qulity on google pics better
[15:41] <Slart> JT: the images that show up in a google search isn't good?
[15:41] <quant> hi all, I have 10.04 b1, ati card, adobe flash plugin (proprietary) - the problem is that pages with flash are extremely slow, to the point of making system unusable - any ideas, pls? btw, athlon x2 and 2 GB RAM
[15:41] <bastidrazor> quant: go to #ubuntu+1 for lucid issues
[15:41] <Slart> JT: can you make a screenshot and show us an example of a bad image quality?
[15:41] <Slart> !pastebin | JT
[15:41] <quant> thanks
[15:42] <Trek> !lucid | quant
[15:42] <nubcake> quant: got a radeon hd 4670 running here (c2d p8400) no probs with flash so far
[15:42] <nubcake> *running 10.04 too
[15:42] <quant> ubuntu+l is empty :)
[15:42] <Trek> tbats a 1 not an l
[15:42] <abhi_nav> quant: not l its 1
[15:42] <abhi_nav> haa haa haa :D
[15:42] <quant> ah :)
[15:42] <Trek> abhi_nav I beat you
[15:42] <quant> lol
[15:43] <abhi_nav> Trek: ammmmmmmmmmm
[15:43] <JT> who here is a person not a bot
[15:43] <geekphreak> lol
[15:43] <abhi_nav> I am a bot
[15:43]  * solid_liq is a bot
[15:43] <JT> geek r u a bot
[15:43] <abhi_nav> I manufactured in the factory of nature
[15:43] <Trek> !ot | JT
[15:43] <arakthor> I am botacus
[15:43] <Slart> quant: #ubuntu+1 has about 300 users at the moment
[15:43] <solid_liq> *beep* *beep*
[15:44] <geekphreak> JT Slart  requested you to paste screenshot of image which u consider bad, did you do it?
[15:44] <Slart> JT: ubottu is a bot.. the other people are real.. as far as I know, at least
[15:44] <bcurtiswx_> which package would I install on ubuntu to use CLAPACK ?
[15:44] <JT> slart r u a bot
[15:44] <geekphreak> jt please no pm's ,talk here
[15:44] <Slart> JT: no
[15:44] <abhi_nav> !bot | quant
[15:44] <JT> cool
[15:45] <Trek> geekphreak: use the IGNORE feature on your client then
[15:45] <JT> slart i need ur help
[15:45] <geekphreak> Trek: thanks
[15:45] <Slart> JT: with the image quality thing?
[15:45] <JT> slart go 1 on 1 chat
[15:45] <Slart> JT: nope, lets keep it in the channel
[15:45] <JT> wait weres thatr
[15:45] <Ddorda> is it possible to install SRWare Iron from repo in Ubuntu?
[15:46] <Slart> JT: the more people that reads your question the better chances there are of you getting it fixed
[15:46] <Bageshwar> anybody did FAI+Ubuntu9.10 and Hadoop+Ubuntu9.10 ?????
[15:46] <geekphreak> and people learn to who are new :)
[15:46] <JT> slart wheres the qulity butten
[15:46] <Slart> JT: I don't understand what the problem is.. I don't know of a quality button
[15:46] <JT> on google pics
[15:47] <abhi_nav> Bageshwar: what is FAI and what is Hadoop?
[15:47] <Slart> JT: google pics looks good to me
[15:47] <geekphreak> jt , you another site :p
[15:47] <Slart> JT: if it looks weird on your computer can you take a screenshot and show us?
[15:47] <Slart> !screenshot
[15:47] <JT> i mean im useing opera browser
[15:47] <JT> and its all fuzzy
[15:47] <JT> the google pics
[15:47] <abhi_nav> can anybody read me?
[15:47] <geekphreak> abhi_nav:  yes
[15:47] <Slart> JT: I have no idea how Opera does its thing
[15:48] <JT> oh
[15:48] <abhi_nav> then why that Bageshwar cannt. I am asking him the same question now for 2 time and still he dont reply :-(
[15:48] <JT> is there a button on google to change it
[15:48] <abhi_nav> :'(
[15:48] <JT> slart
[15:48] <WWEE> Does anyone know the command line to decrypt this ==> tar cjv -C $HOME/html --exclude=./_file_backups --exclude=./hostedsites . | openssl des3 -salt -k password >$HOME/html/_file_backups/$NOWDATE.enc
[15:48] <geekphreak> jt its not google problem,it your system /opera settings :)
[15:48] <JT> oh
[15:49] <babilen> abhi_nav: FAI == Fully Automatic Install, Hadoop == Java Framework for distributed applications
[15:49] <JT> thanks for the help slart
[15:49] <lu> hol
[15:49] <Slart> JT: I run firefox and I don't have a quality button on google pics.. it's probably an Opera feature
[15:49] <Slart> JT: you're welcome
[15:49] <lu> ola
[15:49] <JT> oh cool
[15:49] <Slart> !es | lu
[15:49] <abhinav> WWEE: what do you mean by decrypt ? do you want it explained ?
[15:49] <abhi_nav> babilen: ohhh finally atleast you answerd (but still he is sleeping ) ok thank you for your reply :D
[15:49] <JT> slart ima go check now be back ok
[15:50] <abhinav> WWEE: ok got the question
[15:50] <abhi_nav> WWEE:  see if this is useful: http://linuxpoison.blogspot.com/2008/07/working-with-tar-with-encryption.html
[15:50] <JT>  :)
[15:51] <fission6> whats a good application for reading bin files on ubuntu
[15:51] <abhi_nav> oh you now mean decrypt? WWEE? I am thinkin that you want for encrypting
[15:51] <abhinav> fission6: bin files are binary. They generally can't be "read"
[15:51] <WWEE> =[
[15:51] <abhi_nav> WWEE: but then just have a look at it
[15:51] <Slart> fission6: bin files? cd/dvd images? bin/cue
[15:51] <WWEE> this is nuts
[15:51] <Mathuin> https://help.ubuntu.com/community/AndroidScreenshots -- I found a small bug in this page (I had to restart udev for my changes to take effect) should I notify the page author or make the change myself or what?
[15:52] <fission6> no like binary files, such as .so
[15:52] <geekphreak> fission6: ./file.bin
[15:52] <abhinav> Mathuin: it is a wiki, go ahead and change it
[15:52] <geekphreak> fission6: you will have to chmod + x file.bin
[15:52] <abhi_nav> WWEE who is nuts?
[15:52] <WWEE> i dont know shit about linux other than my desktop needs with ubuntu i need this stupid sh script for godaddy
[15:53] <KB1JWQ> !language | WWEE
[15:53] <fission6> i just got ghex
[15:53] <Slart> fission6: well.. there are hex editors you can use.. if you want to run it it's a whole other thing.. that geekphreak told you about
[15:53] <Pici> Mathuin: Make the change yourself, its a wiki :)
[15:53] <WWEE> tar cjv -C $HOME/html --exclude=./_file_backups --exclude=./hostedsites . | openssl aes-256-cbc -salt -k password >$HOME/html/_file_backups/$NOWDATE.enc
[15:53] <abhinav> fission6: that is a library generally . Why do you want to read it ? or do you want to execute it ?
[15:53] <geekphreak> fission6: open terminal
[15:53] <WWEE> all i want to know is if its actually encrypting the data with the openssl string i used
[15:53] <geekphreak> fission6:  type chmod +x  filename.bin
[15:53] <WWEE> and what string i need to type to decrypt it extract the backup contents
[15:53] <Mathuin> Okay, the make-the-change-yourselves have it, time to register.
[15:53] <geekphreak> fission6: then ./filename.bin
[15:53] <WWEE> im not a linux expert i never will be
[15:53] <fission6> i want to actually review a dll file
[15:54] <WWEE> i just have simple needs
[15:54] <KB1JWQ> WWEE: That's usually a call to gpg, not openssl
[15:54] <geekphreak> fission6: hmm though you said bin
[15:54] <WWEE> well i dont want to dive  into figuring out how to adjust that string above to work with gpg
[15:54] <fission6> binary file
[15:54] <fission6> not bin
[15:54] <WWEE> because it took me FOREVER just to get someone to help me get that one
[15:54] <KB1JWQ> WWEE: Then don't.
[15:54] <WWEE> okay
[15:54] <WWEE> thanks for your input
[15:54] <WWEE> it really helped
[15:54] <meoblast001> was mkinitrd removed from Ubuntu?
[15:55] <KB1JWQ> meoblast001: Looks like yaird provides one.
[15:55] <geekphreak> fission6:  ok
[15:56] <meoblast001> KB1JWQ: yaird error: bad device link in /sys/block/sda (fatal)
[15:57] <KB1JWQ> meoblast001: Okay, what are you trying to do?
[15:57] <fission6> is there a way to look at the symbols table for a dll on ubuntu or parse for the method names
[15:57] <meoblast001> make an initrd file for my kernel i compiled
[15:57] <WWEE> tar cjv -C $HOME/html --exclude=./_file_backups --exclude=./hostedsites . | openssl aes-256-cbc -salt -k password >$HOME/html/_file_backups/$NOWDATE.enc       <[15:57] <KB1JWQ> meoblast001: And you've read https://help.ubuntu.com/community/Kernel/Compile?
[15:57] <abhinav> fission6: strace / ltrace for function names
[15:58] <Madwill> i use the MyIp screenlet to let user see easily what is their ip, but the thing is the ip is wrong....
[15:58] <fission6> i try to run that on the dll and get command not found
[15:58] <abhinav> fission6: gdb for symbol table, probably ? try in #ubuntu-beginners-dev
[15:58] <Mathuin> abhinav: that'll only work if he's running a binary which has that DLL linked to it, right?  I thought he wanted to run that on an standalone DLL.
[15:58] <llutz> WWEE: openssl < yourfile.enc|tar -xjf -  -C /destdir                           or something like that , take correct options from the man-pages on your own
[15:58] <fission6> ok
[15:58] <geekphreak> WWEE: hi
[15:58] <Mathuin> Like "here's this random DLL, wonder what's inside".
[15:58] <koe> hi guys ... can some one tell me how to convert *.mkv to *.avi files ?
[15:58] <fission6> Mathuin: yeah thats me
[15:58] <fission6> whats wrong with that
[15:59] <C_Kode> I have a user that deleted his sound icon from the menu panel.  Now his desktop keeps updating (blinking) Is there a way to add that back?
[15:59] <abhinav> Mathuin: ah ok ..
[15:59] <KB1JWQ> koe: handbrake or ffmpeg
[15:59] <abhi_nav> koe: using convertor software
[15:59] <koe> ffmpeg -i film.mkv -acodec mp3 -vcodec mpeg4 -sameq film.avi this wont work
[15:59] <Madwill> for intance the real ip is 132.214.37.40 but the MyIp screenLet shows 132.214.111.37 which is in the same mask somehow but it is not right... anybody know how could this happens and how can i prevent this from hapenning ?
[15:59] <vonderer> hi. how can I enable automount in xfce without using GDM or KDM?
[15:59] <abhinav> !handbrake | koe
[15:59] <Bageshwar> abhi_nav: sorry was away for a while.. well. HADOOP is apache's library to help in distributed computing
[15:59] <mike48478> hello everyone, does anybody know which is the best media player for ubuntu?! something similar to winamp, lots of radio stations, etc... ?!
[15:59] <geekphreak> take care folks, bye all :)
[15:59] <Bageshwar> abhi_nav: FAI is Fully Automatic Installation
[15:59] <KB1JWQ> !best | mike48478
[16:00] <abhinav> Madwill: are you sure ? what does ifconfig -a in a terminal tell you ?
[16:00] <vonderer> mike48478, if it's audio player you're talking about, it's Audacious2
[16:00] <koe> handbrake has GUI ?
[16:00] <abhi_nav> Bageshwar: yah thanks for telling, actually babilen answerd me. thans both of you. :)
[16:00] <vonderer> mike48478, for video MPlayer is the best
[16:00] <vonderer> hi. how can I enable automount in xfce without using GDM or KDM?
[16:00] <abhinav> mike48478: vlc, miro, mplayer, amarok - take your pick
[16:00] <Bageshwar> abhi_nav: is a complete solution for PXE boot+dhcp+preseed+NFS mount....
[16:00] <abhinav> koe: yes
[16:00] <abhinav> !mtab | vonderer
[16:01] <Madwill> it tells me 132.214.37.40 which i can connect to and ping
[16:01] <WWEE> tar cjv -C $HOME/html --exclude=./_file_backups --exclude=./hostedsites . | openssl aes-256-cbc -salt -k password >$HOME/html/_file_backups/$NOWDATE.enc       <[16:01] <ranjan> how to remove %20 etc from path
[16:01] <ranjan> /home/ranjan/Downloads/43255-ubuntulooks%20engine.tar.gz
[16:01] <mike48478> I meant music guys, thanks for your help!
[16:01] <abhinav> !fstab | vonderer
[16:01] <Madwill> but still the screenlet shows 111.37 which i can't connect to and ping
[16:01] <llutz> Madwill: my 3g-provider does the same, my local-IP != external IP
[16:01] <ranjan> NAUTILUS_SCRIPT_SELECTED_URIS
[16:01] <mike48478> I'll try Audacious2
[16:01] <yehia> hello, i have ubuntu system and i have dell 1525 - my VGA controller is ( mobile GM965/GL960 integrated Graphic controller ) ..... in the device manager it tells that its not recognized yet althought the compiz is working - but still there is some buzz while iam moving any window ... can any body help me to configure my VGA please ?
[16:01] <fission6> Mathuin: i just want to see whats inside the dll
[16:01] <Madwill> even when restarting ubuntu... or netowrk...
[16:01] <metbsd> xbuntu does nothing but shows an mouse pointer
[16:02] <Mathuin> fission6: I understand your interest but don't know the right tool for you.
[16:02] <llutz> WWEE: have you even tried to solve it yourself?
[16:02] <fission6> cool
[16:02] <KB1JWQ> llutz: Nope. :-)
[16:02] <vonderer> ok. let's say it other way. I want to be able to mount anything plugged into my USB without having to do «sudo mount something» just like it is in Nautilus or Thunar in xfce with GDM
[16:02] <WWEE> yeah i have
[16:02] <abhi_nav> Bageshwar: hmm
[16:02] <abhinav> fission6: if it is a well known dll.. you might want to google the name and look at the source file ?
[16:02] <ajip> E: bar: subprocess installed post-installation script returned error exit status 11
[16:03] <WWEE> the task im trying to do is SOOOOOOOOOOOOOOOOOOOOOOOOOOO complex im glad i have to deal with a stupid command line to fix it
[16:03] <llutz> KB1JWQ: rhetorically
[16:03] <fission6> not well known...
[16:03] <WWEE> and spend hours on it
[16:03] <koe> Error: Dependency is not satisfiable: libsoup2.4-1 (>= 2.27.92)
[16:03] <Mathuin> Awww.  I love the command line!  It makes me happy!
[16:03] <KB1JWQ> llutz: I didn't know the answer, ten seconds of google fixed that.  I just have little interest in spoonfeeding someone who won't do anything to help themselves.
[16:03] <koe> but I have Reading state information... Done
[16:03] <koe> libsoup2.4-1 is already the newest version.
[16:03] <abhi_nav> yah me too
[16:03] <WWEE> for sure its great spending extra time learning a stupid syntax
[16:03] <WWEE> to do the simplest of stuff
[16:03] <progre55> hey people! how do you see the contents of a binary file in hex format?
[16:03] <llutz> KB1JWQ: same here
[16:03] <WWEE> true efficiency
[16:03] <Slart> progre55: cat file | hex    should work
[16:04] <abhinav> !od | progre55
[16:04] <Jon-_> I want to be able to do the following: take some text file, cut out a line containing "some string", and the line just above it, and put those lines, and only those lines (from the source) into a new text file.
[16:04] <yehia> hello, i have ubuntu system and i have dell 1525 - my VGA controller is ( mobile GM965/GL960 integrated Graphic controller ) ..... in the device manager it tells that its not recognized yet althought the compiz is working - but still there is some buzz while iam moving any window ... can any body help me to configure my VGA please ?
[16:04] <abhinav> progre55: od
[16:04] <llutz> Jon-_: grep -B1 "pattern" file >newfile
[16:04] <hareldvd> After I switch to console mode using <Ctrl>+<Alt>+<F3> I can't switch to a different console or back to graphics mode with <Ctrl>+<Shift>+<F7>. Any idea?
[16:04] <abhinav> progre55: od stands for octal dump, which shows hex dump too :)
[16:04] <koe> Error: Dependency is not satisfiable: libstdc++6 (>= 4.4.0)
[16:05] <abhinav> hareldvd: tried other combos (f8-f12) ?
[16:05] <progre55> Slart, abhinav, thanks guys, appreciate
[16:05] <koe> abhinav, how can I solve this ?
[16:05] <hareldvd> abhi_nav, Yep.
[16:05] <abhi_nav> haa haaa haaa it happens again
[16:06] <abhi_nav> :D
[16:06] <ranjan> how to use sed to replace %20 from a string
[16:06] <abhinav> abhi_nav: :)
[16:06] <abhi_nav> hareldvd i m abhi_nav he is abhinav haa haa haa
[16:06] <fission6> replace it with what
[16:06] <abhi_nav> abhinav :)
[16:06] <Slart> progre55: sorry.. I keep abusing cat..    just doing    hex <filename>  is much easier than my first suggestion
[16:06] <ranjan> fission6, replace with "\ "
[16:06] <abhinav> abhi_nav: I don't know the answer, so you go ahead and reply to hareldvd ;)
[16:07] <fission6> s/%20/\ /g doesnt work?
[16:07] <abhi_nav> can i have my bot to resolve this nick conflicting prob?
[16:07] <abhinav> koe: : that is the apt-get install output, right ?
[16:07] <ranjan> fission6, no :(
[16:07] <abhi_nav> abhinav hmm ;) :)
[16:07] <llutz> fission6: s/\%20/ /
[16:07] <ajip> how to install ubuntu lucid theme in karmic koala
[16:07] <bluestar> hey
[16:07] <bcurtiswx_> what package do i install to get use of CLAPACK libraries?
[16:07] <koe> abhinav no
[16:07] <koe> I DL the .deb file
[16:07] <abhinav> ajip: search for the package in launchpad (or on artwork site) and download it
[16:08] <koe> http://handbrake.fr/downloads.php
[16:08] <abhi_nav> hareldvd type exit to come back to gui
[16:08] <abhinav> koe: handbrake should be in the repo, no ? could you try installing from the repo ?
[16:08] <Slart> ranjan, fission6: <something>  | sed 's/%20/ /g'   worked for me
[16:08] <koe> koe@box:~$ sudo apt-get install handbrake
[16:08] <koe> Reading package lists... Done
[16:08] <koe> Building dependency tree
[16:08] <koe> Reading state information... Done
[16:08] <koe> E: Couldn't find package handbrake
[16:08] <FloodBot3> koe: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[16:08] <fission6> yea this is for ranjan
[16:08] <bcurtiswx_> koe use paste.ubuntu.com for multiline pastes
[16:08] <ranjan> Slart, let me try
[16:09] <hareldvd> abhi_nav, I have set the keymap for alternate language using setxkbmap -option grp:lswitch,grp:alt_shift_toggle ... Maybe that is the problem?
[16:09] <koe> sorry ...i`m not used to Irc ...
[16:09] <Guest76054> leaving
[16:09] <bcurtiswx_> anyone know which package to instal to be able to use CLAPACK?
[16:09] <bcurtiswx_> libraries
[16:09] <nze> i'm not recording any sound with my microphone. 9.10 on a dell xps m1530.
[16:09] <nze> output of lspci | grep Audio :
[16:09] <nze> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
[16:09] <nze> any ideas where to start?
[16:09] <abhi_nav> hareldvd cannt say . dont know about it
[16:09] <koe> abhinav, im using 9.04 not 9.10 ... should that be the problem ?
[16:09] <fission6> echo "fdshfjkds%20fdsfds" | sed 's/%20/ /' work sfor me, also if %20 is url encoding, you may want to consider perl or python and use a url decoder type tool.
[16:09] <koe> the .deb file its for 9.10
[16:10] <Pici> !who
[16:10] <hareldvd> can the key combination be changed?
[16:10] <abhinav> koe: one sec
[16:10] <ajip> abhinav: thank you :D
[16:11] <abhinav> koe: https://launchpad.net/~handbrake-ubuntu/+archive/ppa (from combo, select code for jaunty)
[16:11] <tarzeau> anyone up for a duel? http://lplusplus.co.cc ?
[16:11] <Slart> !ot | tarzeau
[16:11] <sinan> how can i run a second X session? i am using "startx", but it is complaining about "fatal error: server already exists at 0."
[16:11] <abhinav> koe: add the code to your /etc/apt/sources.list, sudo apt-get update; sudo apt-get install handbrake
[16:11] <llutz> sinan: startx -- :1
[16:11] <tarzeau> i'm making it an ubuntu package!
[16:12] <sinan> llutz: thx
[16:12] <Slart> tarzeau: this channel is for user support only
[16:12] <geekphreak> back :)
[16:12] <tarzeau> Slart: ok, sorry
[16:13] <fission6> anyone know a quick way to plot an audio's waveform? from command line?
[16:13] <Slart> tarzeau: but try ubuntu-offtopic.. there might be a gaming channel somewhere as well
[16:13] <progre55> and another question.. how to edit a binary file in hex format? any hex editors? can the command hex do that? :)
[16:13] <tarzeau> fission6: i'd use some audio software, then make a screenshot?
[16:13] <fission6> nah
[16:13] <Pici> progre55: check out ghex
[16:13] <progre55> Pici: thanks
[16:14] <geekphreak> hmm
[16:14] <llutz> progre55: hexer, hexedit
[16:14] <petardilla> hola
[16:14] <Slart> fission6: I would have a look at python + gnuplot.. I doubt there is a ready-to-go package for it
[16:14] <progre55> llutz: thanks
[16:14] <petardilla> hola
[16:14] <fission6> yeah, looks like sox can output gnuplot data
[16:14] <petardilla> alguien sabe escribir español?¿
[16:15] <researcher1> whats port 5800?
[16:15] <Pici> !es | petardilla
[16:15] <Jon-_> Have: some file with an IP on each line. Want: a new text file with only IPs. Any ideas? (new to bash)
[16:15] <mikebeecham> hi all, is there a general Ubuntu hang-out channel, like the cafe or something?
[16:15] <petardilla> hola Pici
[16:15] <erUSUL> !ot | mikebeecham
[16:15] <petardilla> nadie entiende el español¿?
[16:16] <Myrtti> petardilla: inglés aqui, por favor.
[16:16] <xuxin> anyone know how to get the multi-touch functions working on eee touchpad?
[16:16] <petardilla> okis Myrtti
[16:16] <petardilla> yo no se ingles
[16:16] <koe> abhinav, I added deb http://ppa.launchpad.net/handbrake-ubuntu/ppa/ubuntu jaunty main
[16:16] <koe> deb-src http://ppa.launchpad.net/handbrake-ubuntu/ppa/ubuntu jaunty main  to sources.list but still apt-get wont work
[16:17] <StaRetji> Hello folks. Is it possible to upgrade kernel on LiveCD system (installed on USB with permanent storage file)?
[16:17] <Slart> Jon-_: you want to get rid of the newlines? ie all ips on one line?
[16:19] <Jon-_> Slart: I just use cut with a field. lol. Thanks anyway
[16:20] <koe> nvm i`ll just compile and install it ...
[16:21] <abhinav> koe you did an update, right ?
[16:21] <Madwill> so in the end if i need a screenlet showing the real ip, the ip from ifconfig... anybody know of one ?
[16:21] <p1l0t> anyone know how to restart samba?
[16:21] <koe> abhinav, yeah I did
[16:21] <abhinav> koe: same dependency issue ?
[16:22] <p1l0t> /etc/init.d/samba restart ?
[16:22] <erUSUL> p1l0t: sudo service samba restart or sudo invoke-rc.d samba restart
[16:22] <koe> nvm ... thx anyway ... i`m compiling atm ...
[16:22] <geekphreak> p1l0t:  sudo /etc/init.d/smb restart
[16:22] <p1l0t> thanks
[16:22] <Royall> What's a good mp3 player that definitely works with Ubuntu?
[16:22] <koe> exaile
[16:22] <Slart> Royall: I use quod libet
[16:22] <Royall> a good portable mp3 player
[16:23] <Royall> like, ipod, zune, etc
[16:23] <Slart> Royall: oh.. one of those.. nevermind then
[16:23] <GlassEyelid> can xp be installed to an extended partition?
[16:23] <mohsin1> I want to setup a local area network with Ubuntu as server. My main aim is to control the bandwidth consumption of the users so that all get smooth experience. Can anyone guide me about any resources out there?
[16:23] <abhinav> Royall: most of them work
[16:23] <Slart> GlassEyelid: I don't think so.. ask in ##windows to get better answers
[16:23] <geekphreak> GlassEyelid: #windows
[16:23] <GlassEyelid> thanks
[16:23] <Royall> Does Zune work?
[16:23] <Madwill> zune... i would be suprized
[16:23] <Madwill> with wine....
[16:24] <xuxin> anyone know how to get the multi-touch functions working on eee touchpad?
[16:24] <Madwill> you need that zune thing
[16:24] <researcher1> How can I change the permission of this file /etc/italc/keys/private/teacher/key
[16:24] <researcher1>  ?
[16:24] <Madwill> sudo
[16:24] <Madwill> ?
[16:24] <Slart> mohsin1: there are some traffic shaping apps out there.. or you can create your own using iptables
[16:24] <abhinav> Madwill: don't all of them show up as fat32 devices ? you can just copy songs onto them
[16:24] <Royall> it's not very helpful if you can't get USB working in wine T_T
[16:24] <cbx> whats a good archival program for ubuntu?
[16:24] <Slart> mohsin1: if you google for "traffic shaping ubuntu" you'll get some good hits and tutorials.. it won't be easy.. but not extremely hard either
[16:25] <Madwill> abhinav no there are 2 types of them and one type need specifics application to access the other is usb key format(fat32)
[16:25] <cbx> I got myself 7z, but I'm unable to use it oO
[16:25] <Slart> cbx: zip, rar, tar+gzip/bzip.. there are lots
[16:25] <cbx> well, gui based please
[16:25] <Madwill> something about ums or not
[16:25] <metbsd> is there xbuntu support channel?
[16:25] <abhinav> Madwill: ok
[16:25] <cbx> I've been using winrar al this time on windoze
[16:25] <Madwill> you need one to support UMS
[16:25] <metbsd> i installed xbuntu, login, and then idle, nothing shows
[16:25] <eremite> cbx p7zip-full i think is what you need
[16:25] <Slart> cbx: file roller is one.. it's the default one I think
[16:26] <xuxin> anyone know if there is a support channel for asus eee netbooks?
[16:27] <Slart> !eee
[16:27] <abhinav> cbx: rar and unrar are available on linux (as downloads, I think).
[16:27] <hal> I am trying to follow these instructions to install an alternative version of wine   http://www.3spoken.co.uk/2009/08/making-wine-sound-work-with-pulseaudio.html
[16:27] <xuxin> thanks!
[16:27] <geekphreak> abhinav: yup
[16:27] <hal> hmm, hold that thought... :)
[16:28] <alexxio> perhaps someone knows about http://www.linuxliveusb.com/ ? i want to know if there isthe possibility with this method to install more than one distro on the same key..
[16:28] <hal> ok, I have installed the ppa key and the source, but I am not sure how to install the sofware package from this source rather than the default ubuntu repo.
[16:28] <hal> would someone help me through this please?
[16:29] <hangyaku> Can anyone help me format my iPod? Ubuntu detects my iPod and I can access it fine, however gparted does not show the iPod under "Devices", so I can't format it.
[16:29] <WWEE> i finally figured it out for myself... sorry for being so annoying!!
[16:29] <abhinav> hal: generally, it would pick up the package from ppa (as it is newer). Else go to properties in synaptic, for the package, and see what versions are available
[16:29] <abhinav> hal: and then in synaptic, choose package->force versopm
[16:30] <p0e> Hello... I'm using 9.10 and was hoping someone could help me disable IPv6... I've been having latency issues and suspect this may be the cause.\
[16:30] <abhinav> hal: but I doubt all that would be required
[16:30] <abhi_nav> ohh lol  I read it as ........FORGOT my ipod?.......... haa haa haa
[16:30] <hub_cap> Is there an Evolution chat room?
[16:30] <hal> hi abhinav
[16:30] <abhinav> hal: hi
[16:30] <eremite> hub_cap: Biological evolution?
[16:30]  * abhi_nav is decided to wait and watch
[16:30] <hal> abhinav:  ok. I have synaptic open, and only see one package for wine
[16:31] <hal> abhinav: I mean only see one version
[16:31] <hub_cap> eremite, no evolution email client
[16:31] <abhinav> hal: hold on .. I am looking at the link you shared
[16:31] <vivid> im using 32bit adobe reader on my 64bit install to read DRM protected pdfs, but the thumbnail previews are black, making it hard to navigate the documents, has anyone had experience with this?
[16:31] <hal> ok abhinav - that's good of you
[16:32] <ePax> I have problems with removing / installing gnome do... i get this error... http://paste.ubuntu.com/400063/
[16:32] <hal> abhinav: oh, I am sorry, you are right, there is only one wine1.2
[16:32] <hal> the other is simply wine
[16:32] <abhinav> cool
[16:32] <abhinav> hal: just install the wine1.2 then
[16:33] <hal> abhinav: thanks, yes, that was a bit of a silly question, wasn't it? :-/  Sorry
[16:33] <dahud> Can I shoot myself in the foot by recompiling my kernel for fun?
[16:33] <abhinav> hal: no issues :)
[16:34] <abhinav> dahud: not unless you change something drastically. At worst, you won't be able to boot with your kernel
[16:34] <nze> ...
[16:34] <Habot> haha
[16:34] <Habot> hi
[16:34] <abhinav> !hi | Habot
[16:34] <p0e> Hello... I'm using Ubuntu 9.10 and was hoping someone could help me disable IPv6? I get some nasty latency problems when running a few games and suspect this may be the case... Google hasn't been much help getting it disabled though.
[16:34] <juanillo>  /server irc.irc-hispano.org
[16:34] <abhinav> p0e: how are you getting the ipv6 address - dhcp ? or static ?
[16:34] <Slart> !ipv6
[16:35] <eremite> p0e: it seems that most people get lag on Ubuntu for games that suaully work in Windows.  Most likely its the drivers.
[16:35] <Slart> p0e: see ubottus link above
[16:35] <p0e> ah, thank you very much
[16:36] <Arti> Hio to all
[16:36] <Arti> hi
[16:36] <hangyaku> Can someone help me format my iPod?
[16:36] <geekphreak> hangyaku: hi
[16:37] <geekphreak> hangyaku:  see its icon on desktop?
[16:37] <hangyaku> geekphreak: yes
[16:37] <geekphreak> hangyaku: right click see if u get format option
[16:38] <hangyaku> geekphreak: I don't see one... just "Open" and "Eject". I'm using the Ubuntu netbook remix, I don't know if that makes a difference.
[16:39] <geekphreak> hmm
[16:40] <yassine> hi all
[16:41] <Mathuin> The wiki suggests Banshee, Amarok, and gtkpod for syncing iPods.  Do any of those handle podcasts?
[16:41] <p0e> eremite: the url is confirming that ipv6 is already disabled on my machine... apparently i managed to take care of it yesterday... you said its most likely the wireless drivers?
[16:41] <hal> is there any way to launch a wine program in a better way than going to Applications / Wine / Browse C:/ Drive / Program Files / AppName / AppName.exe  ?
[16:41] <Yohansen> Если есть кто из Сочи, нужен на работу системный администратор
[16:41] <abhinav> !hi | yassine
[16:42] <abhinav> hal: create a shortcut . or from terminal / run (alt-f2) : wine <path>
[16:42] <yassine> i have a problem when trying to update my system's packages: aptitude ends the update process with the following error: ValueError: /usr/bin/python does not match the python default version. It must be reset to point to python2.6
[16:42] <Arti> abhinav Hi,how are u
[16:43] <abhinav> yassine: did you change anything with respect to python ?
[16:43] <hal> abhinav: sorry, how do I create a shortcut?
[16:44] <abhinav> hal: first try from command line. if it works, then right click on desktop, and create launcer
[16:45] <hal> abhinav: ah, actually since you said that it prompted me to right click on the exe file, and there is a Make Link option
[16:45] <hal> abhinav: I just didn't imagine that would be possible before.  Thank you!
[16:45] <hal> abhinav: btw, I just cut and pasted the link onto the desktop
[16:45] <netbook> Hi, I can't seem to install qemu-system-arm from repos, is that normal?
[16:45] <abhinav> hal: did it work ?
[16:46] <hal> abhinav: yes, it did :)
[16:46] <abhinav> hal: cool :)
[16:46] <yassine> abhinav, nothing that i can remember to be honest but following the link shows this: http://pastebin.com/VPWknnvp
[16:46] <Mathuin> Ooooh, banshee looks really good.
[16:47] <hal> I am gradually getting ubuntu just how I want it! :)
[16:47] <abhinav> yassine: that looks fine. Can you try if sudo apt-get update works ?
[16:47] <Polysics> hello
[16:47] <abhinav> !hi | Polysics
[16:47] <Polysics> which signals does init.d send when you do start and stop?
[16:48] <llutz> Polysics: it sends "start/stop" to the scripts
[16:48] <psusi> Polysics: the scripts send SIGTERM usually to stop
[16:49] <nze> i'm not recording any sound with my microphone. 9.10 on a dell xps m1530.
[16:49] <nze> output of lspci | grep Audio :
[16:49] <nze> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
[16:49]  * ProjectxSorrow slaps wols around a bit with a large trout
[16:49] <nze> anyone?
[16:49] <abhinav> Polysics: 0 to stop, 6 to restart
[16:49] <llutz> abhinav: that's init
[16:50] <Polysics> i am probably tackling this from the wrong side
[16:50] <Polysics> i have a running script, written in Ruby, that has to be turned into a daemon
[16:50] <pedropistorio> ola pessoal
[16:50] <pedropistorio> queria uma lista de repositorio do ubuntu 9.10
[16:50] <abhinav> llutz: right .. sorry for the confusion
[16:50] <pedropistorio> alguem tem ai
[16:50] <psusi> abhinav: no, those are sys5 run levels to shutdown or restart the whole system
[16:50] <Guest66178> to setup a local area network, which edition of ubuntu should I use? I want traffic monitoring
[16:51] <opossum_oisif> does somebody knows how do I do to grep a non unicode char in a file or a filename?
[16:51] <Honik> #grass
[16:52] <yassine> abhinav, it seems that python-lxml is the source of the problem but iam unable to remove it: http://pastebin.com/nknKW5qE
[16:52] <yassine> anyone of you guys having a problem with python-lxml causes dpkg to break returning error code 1? http://pastebin.com/nknKW5qE
[16:53] <BoondoKLife> Guest66178: Well I assume this would be a server so ubuntu-server?
[16:53] <rafaelsoaresbr> hello, I've finally installed ubuntu 9.10 and icons in "system" menu are hidden. how to show then?
[16:53] <orb01> yassine: clean aptitude
[16:54] <orb01> yassine: (sudo apt-get clean)
[16:54] <wols> yassine: ls -l /usr/bin/python
[16:54] <BoondoKLife> rafaelsoaresbr: You should be able to enable that with tweak-ubuntu. At least that is the only way I know how to.
[16:55] <researcher1> whats the meaning of this drwxr-xr-x 2 root root 4.0K 2010-03-23 21:51?
[16:55] <researcher1> cant make any sense out of drwxr-xr-x 2 root root 4.0K 2010-03-23 21:51.please help
[16:55] <wols> researcher1: it's part of the output of "ls"
[16:55] <yassine> orb01, apt-get clean does not solve the problem
[16:55] <wols> researcher1: man ls
[16:55] <researcher1> ok
[16:56] <erUSUL> !permissions | researcher1
[16:56] <Animale> hi
[16:56] <yassine> wols, ls -l http://pastebin.com/VPWknnvp
[16:56] <omri> researcher1 directory,read,write,execute those are permissions on that directory
[16:56] <rafaelsoaresbr> BoondoKLife, thanks, is it a .deb package?
[16:56] <Animale> anyone know why ssh mainframe@apple.com /bin/bash -c "/bin/perl /home/Steve/imapc.pl -par1 A -par2 B -par3 C" wont work? Apart from the fun factor?
[16:56] <BoondoKLife> rafaelsoaresbr: http://ubuntu-tweak.com/
[16:57] <BoondoKLife> rafaelsoaresbr: There is a ppa for it to if you want to add it, that way you the the updates like any other application.
[16:57] <rafaelsoaresbr> BoondoKLife, i am going to try, thanks
[16:57] <neyder> greetings
[16:58] <Animale> nobody? :Y
[16:58] <neyder> my web cam is so slowly with cheese, but with luvcview is just fine, this is the output of luvcview http://pastebin.ubuntu.com/400072/
[16:58] <researcher1> wols: i have seen man ls but still im uncelar about these 10 spaces drwxr-xr-x  Help?
[16:58] <p0e> I'm trying to build a file and getting: "WARNING: modpost: missing MODULE_LICENSE() in /home/me/hybrid-portscr/wl.o
[16:58] <p0e> see include/linux/module.h for more information"
[16:58] <arathald> Animale: if you really have that login, you shouldn't have to ask us :P
[16:58] <BoondoKLife> researcher1: Those are basic permissions for that directory
[16:58] <StaRetji> Hello folks. Is it possible to upgrade kernel on LiveCD system (installed on USB with permanent storage file)? I have to upgrade intel gpu drivers and need new kernel for it. THX ;)
[16:59] <wols> !permissions | researcher1
[16:59] <researcher1> ok.ubottu
[16:59] <researcher1> let me study n then talk
[16:59] <researcher1> thanks Ubottu this clears my doubt
[17:00] <arathald> Animale: it's considered bad manners to PM someone you don't know without asking first
[17:01] <Animale> arathald sorry about that
[17:01] <Jeeves_Moss> how can I recover an Ubuntu box that's stuck @ "grub rescue>"?  I don't have a ROM on this box, and I can't boot from USB
[17:02] <epaphus> hello, is there any way i can increase the sound volume even more then what the sound preferences permit me? the sound is low.
[17:02] <BoondoKLife> epaphus: Check in alsamixer, You might need to tune something up in there if possible.
[17:03] <Animale> anyway cant anyone tell me why ssh mainframe@apple.com  /bin/bash -c "/bin/perl /home/Steve/imapc.pl -par1 A -par2 B -par3 C" wont work?
[17:03] <Animale> I think its something with the many parameters
[17:03] <arathald> Animale: maybe you should read what ssh tells you when you try that...
[17:04] <Animale> it gives me nothing, it just hangs
[17:04] <llutz> Animale: tried without the bash -c?
[17:04] <Animale> if i run the per script locally it works fine
[17:04] <Animale> *perl
[17:04] <arathald> haha... apple is apparently smarter about this than I thought
[17:05] <llutz> Animale: tried without the bash -c?
[17:05] <arathald> they won't reject an ssh, theyll just hang
[17:05] <Animale> yes, to many arguments^^
[17:05] <^mNotIntelligent> hi all
[17:05] <arathald> ...
[17:05] <jasonop8> apple?
[17:05] <jasonop8> oh.
[17:06] <jasonop8> got itunes to run in 'buntu yet :D
[17:06] <arathald> Animale: maybe you want to explain why the h*** you're trying to ssh into apple first... then we can go from there
[17:06] <Animale> geez its an example
[17:06] <arathald> ?
[17:07] <Animale> thats not the real command
[17:07] <arathald> you're trying to run an *example* that ssh's into *apple.com* and you're wondering why it won't work?
[17:07] <Animale> -_-
[17:07] <arathald> Animale: well, then, don't say 'I'm running this command and it's not working'
[17:07] <Animale> you are clearly mocking me :D
[17:07] <epaphus> BoondoKLife, hmm... ok... thanks..
[17:07] <arathald> Animale: i was thinking the same of you
[17:08] <Animale> actually its a perl script for setting sap in mantenance mode
[17:08] <arathald> Animale: from now on, if you want to use an example user and server use something like user@example.com, or user@my_server, because otherwise, you look like nothing but a troll
[17:08] <Animale> but writing all that down was to long so I just thiought uip an example
[17:09] <spO> fstab or whatever auto mounts then when i login to windows x,  it tries to automount with a user other than root....  hwo to i changfe the later automount?
[17:09] <Animale> got it
[17:09] <Animale> so any suggestions?
[17:10] <arathald> Animale: try putting the -t flag before /bin/bash
[17:10] <llutz> Animale: ssh user@host -- perl script a ab c de
[17:10] <arathald> wait, sratch that, im thinking of something entirely different, sorry, i'm still half asleep
[17:11] <lgc> Hi, what is this "exe" program that shows up on my top and gobbles up my CPU power?
[17:11] <Animale> @llutz with just the --?
[17:11] <Pici> lgc: For whatever reason, thats what the Chrome process uses.
[17:11] <ZykoticK9> lgc, gnome-do?
[17:12] <llutz> Animale: ssh user@host -- /bin/perl /home/Steve/imapc.pl -par1 A -par2 B -par3
[17:12] <ida_> Hello
[17:12] <Animale> ok thank you I will try this
[17:12] <lgc> Pici really? When I kill it nothing seems to happen, except that it turns back my CPU to me.
[17:12] <Bageshwar> anybody experienced with FAI on karmic ?
[17:12] <lgc> ZykoticK9, pardon?
[17:12] <arathald> Animale: what happens when you just try to ssh into the server, can you log in fine?
[17:12] <ZykoticK9> lgc, gnome-do also shows up as an EXE for whatever reason
[17:12] <llutz> Animale: -- = "no more options after this"
[17:13] <Pici> lgc: Really?  I've seen it when I'm running Google Chrome, I haven't tried to kill it though.
[17:13] <Animale> yes I can log on ad eve run the script locally
[17:13] <lgc> ZykoticK9, I see. And what is gnome-do?
[17:13] <BoondoKLife> ZykoticK9: gnome-do shows up as gnome-do for me
[17:13] <Animale> @llutz ah ok thanks :)
[17:14] <lgc> Pici, go ahead and kill the sucker! It won't harm your session! (But don't blame me if it does.)
[17:14] <ZykoticK9> BoondoKLife, i can't check right now I'm using Docky instead
[17:15] <BoondoKLife> ZykoticK9: I use docky and gnome-do, both show up as their names, just checked
[17:15] <Emanon> pardon my opinion but docky sucks ALOT
[17:15] <ZykoticK9> lgc, I use gnome-do as a dock, like MacOSX's dock to launch stuff at the bottom, but gnome-do does a LOT more then that (kinda hard to explain what it does)
[17:15] <Emanon> or it did when i used the version while it was still part of gnome-do
[17:15] <BoondoKLife> Emanon: Well thank god that is your opinion  cause I love it!
[17:15] <rax_bg> is here someone familiar with kde. i want to upgrade mine to ver. 4.4 but don't know how. At first i was using gnome (ubuntu) then i installed the package kubuntu-desktop but i was 4.3 kde. then i did dist-upgrade but with no results, kde is still ver 4.4
[17:15] <erUSUL> rax_bg: #kubuntu
[17:15] <Emanon> i prefer cairo dock myself but others don't so there hehe
[17:15] <ZykoticK9> BoondoKLife, Docky.exe in my top list
[17:15] <spO> how come when i loggin as a user in windows x , it tries to automount an external drive, but root already did that?
[17:15] <rax_bg> stil ver 4.3*
[17:16] <lgc> ZykoticK9, OK, thanks.
[17:16] <BoondoKLife> ZykoticK9: Very odd, maybe different versions?
[17:16] <rax_bg> erUSUL:  they don't say anything
[17:16] <ZykoticK9> BoondoKLife, i remember do.exe or similar with gnome-do
[17:17] <BoondoKLife> ZykoticK9: Are you just running just `top`
[17:17] <stsm> how do i precvent ^C from being displayed in terminals?
[17:17] <stsm> as globally as possible
[17:17] <ZykoticK9> BoondoKLife, yup - i'm not new-school enough to use ntop
[17:17] <elli222> (about 50% sure about this, but) gnome-do uses Mono as its language, so it's likely that it would be a .exe Its still a "native" application.
[17:17] <stsm> elli222, about 50% sure? lol so you're equally unsure
[17:18] <BoondoKLife> ZykoticK9: That is very odd, doing the same thing and getting different outputs o well
[17:18] <ZykoticK9> elli222, thanks - i was always curious about that exe part
[17:19] <ZykoticK9> BoondoKLife, my memory about gnome-do are from karmic - but i'm pretty sure we have different versions now
[17:19] <elli222> Although, if you download Mono for winows, it may very well run on that too. (I don't really like Mono - so I try and avoid it)
[17:19] <dahud> I need to reset gnome-panel to initial config via command line.
[17:20] <ZykoticK9> !panels | dahlia
[17:20] <ZykoticK9> dahud, see above (sorry dahlia)
[17:25] <eremite> I set my desktop wallpaper to use a screensaver instead of a wallpaper.  It works fine, but only if compiz is turned off.  I have seen videos of people using this feature with compiz turned on, so I was wodnering if anyone knew how to do that?  Here's waht I did to set it up http://ubuntuguide.net/set-a-screensaver-as-your-alive-desktop-wallpaper-in-ubuntu   Any help would be awesome.
[17:25] <Trek> eremite: perhaps your system can't handle it?
[17:26] <lgc> ZykoticK9, I've installed my gnome-do but I can't find it on the menus. Where does it hide?
[17:26] <eremite> Trek: why do you say that?  It simply draws natuatlis desktop when compiz is on.  I want that turned off.  My comp and handle it, trust me.
[17:26] <exs> hi
[17:26] <exs> iam trying to configure userdir for apache2. but i get the error You don't have permission to access /~rudolf/ on this server.
[17:27] <Trek> eremite: sorry, misread your question, disregard
[17:27] <eremite> Obviously.
[17:27] <ZykoticK9> lgc, should be in Application / Accessories -- if you don't see it you could run "killall gnome-panel" and see if it shows up
[17:27] <lgc> exs, you have to do it as root.
[17:27] <soreau> eremite: disable Nautilus from drawing the desktop by setting the gconf key /apps/nautilus/preferences/show_desktop to "false".
[17:27] <exs> lgc, hä?
[17:27] <eremite> soreau: I already did that.  It only works with compiz turned off.  I want to turn compiz on.  That command does NOT do that.
[17:28] <ZykoticK9> exs, there is a problem with your path - use absolute paths and not ~
[17:28] <Ddorda> how do I get a lost of all packages installed in my ubuntu?
[17:28] <exs> wtf i want userdir for my webhost
[17:28] <Pici> Ddorda: dpkg -l | grep "^ii"
[17:28] <Ddorda> list*
[17:28] <eremite> Ddorda: open synaptic
[17:28] <lgc> exs, if you get such errors it is only because you are doing admin tasks you are not allowed to do as a normal user. You have to do them as super-user (root).
[17:29] <Ddorda> Pici: thanks
[17:29] <exs> lgc, what to do?
[17:29] <meoblast001> does anyone know where i can find mkinitrd for Ubuntu?
[17:29] <exs> lgc, this mod is for normal users
[17:30] <soreau> eremite: Ah, you are not using xwinwrap
[17:30] <lgc> exs, whenever you get that error, try to do this: "sudo <instruction>". <instruction> is whatever you want to do that needs special privileges.
[17:30] <ZykoticK9> exs, lgc "/~rudolf/" notice the / and the ~, something is wrong with the path
[17:30] <exs> The requested URL /~root was not found on this server.
[17:30] <soreau> eremite: You need to use xwinwrap
[17:30] <lgc> ZykoticK9, you got a point there.
[17:31] <exs> ZykoticK9, iam afraid that u have not the first idea what userdir is
[17:31] <llutz> exs: ask at #httpd
[17:31] <eremite> soreau: no, I am not.  That has nothing to do with what I am doing, though.  It was not mentioned in the tutorial and the tutorial works.  Other tutorials used xwinwrap and people say it does not work with compiz.  Are you positive that xwinwrap will fix this exact problem and isnt just a different path to teh same problem?
[17:31] <ZykoticK9> exs, htpd from users home directory
[17:32] <exs> ZykoticK9, exactly
[17:32] <eXEddie> hello together
[17:32] <leo> hi
[17:32] <soreau> eremite: If you want to come to #compiz, I will even help you set it up
[17:32] <ZykoticK9> exs, the point i'm trying to make is the path is NOT /~user -- it's just ~user
[17:32] <leo> i would like to change owner of one hard disk
[17:33] <leo> i did "sudo chown -R leo:leo /media/multimedia"
[17:33] <leo> and i would like to add two other user
[17:33] <eremite> soreau: can you canswer the question?  Will using xwinwrap enable me to use compiz, contrary to what other peopel said, mainly that it DOES NOT WORK WITH COMPIZ?
[17:33] <exs> ZykoticK9, The requested URL /rudolf was not found on this server.
[17:33] <leo> what should i do ?
[17:33] <ReymonARG> Hi, someone know have to do Music Loopback?
[17:33] <soreau> eremite: If you want to have that attitude, I wont help you at all
[17:34] <ZykoticK9> exs, if i where you, i'd take llutz's advice and ask in the other channel
[17:34] <lgc> exs, it's "~rudolf", not "/rudolf/".
[17:34] <exs> lol lgc i know
[17:34] <eXEddie> i installed ubuntu inclusive 9.1 on my laptop, ecrypt included..and now i cannot start the desktop afer the loginwindow ...how is this possible ?
[17:34] <eremite> soreau: I havbe no time to waste with peopel who cannot help.  If you cannot answer with a simple tyes or no then I dont need your help.  I doubt you know what you're talking about, anyway.
[17:34] <MTecknology> How do I disable IPv6?
[17:34] <exs> ZykoticK9, i do it already
[17:34] <soreau> eremite: I already told you what to do.
[17:35] <blackxored> how can I do quick tests on a laptop to see whether a) the hardware will be compatible b) doesn't have any hardware problem from a liveCD
[17:35] <eremite> soreau: you're too much of an ass to just answer the question, eh?
[17:35] <flodine> lol
[17:35] <exs> the link is localhost/~rudolf and not ~rudolf or /rudolf/
[17:35] <Emanon> both of you back to your corners
[17:35] <flodine> lol
[17:36] <Emanon> get some water have the short guy yell at you for a minute and come back out
[17:36] <ZykoticK9> !attitude > eremite
[17:36] <shadeslayer> hi how do i get my vga info via lshw?
[17:37] <eXEddie> Need help please:  i installed ubuntu 9.1 on my laptop, ecrypt included..and now i cannot start the desktop afer the loginwindow ...how is this possible ?
[17:37] <soreau> shadeslayer: What info were you looking for exactly?
[17:37] <lgc> leo, A file can only have one owner and one group, if that's what you don't know. You can add permissions for anyone to do whatever to that file.
[17:37] <shadeslayer> i need to put a vga= line in grub2 to use a good display res
[17:37] <UF-Gast443> got a problem: i've booted from the live CD and tried to instal Ubuntu, but i cant use my mouse and keyboard ???, checked Cd but it says "no errors found" what to do ????
[17:37] <shadeslayer> soreau: ^^
[17:37] <ZykoticK9> shadeslayer, not sure about lshw - but to find your video card you can use "lspci | grep -i vga"
[17:37] <shadeslayer> ZykoticK9: yeah i know about that
[17:37] <soreau> shadeslayer: Which card model do you have?
[17:37] <shadeslayer> soreau: heard of frame buffer?
[17:37] <shadeslayer> soreau: nvidia 8600 M GT
[17:38] <shadeslayer> soreau: just so that you know and dont take me for a newbie,im using kubuntu for a year :D
[17:38] <soreau> shadeslayer: Im not good with nvidia so I wouldnt know
[17:38] <shadeslayer> soreau: well its a command i cant simply find...
[17:38] <killown> i'll got some improviment upgrading karmic to lucid?
[17:39] <Pici> shadeslayer: What are you expecting to find in lshw?
[17:39] <Rashless> are here any Ubuntu developers?
[17:39] <llutz> shadeslayer: vga= is deprecated with grub2
[17:39] <Pici> killown : Please join #ubuntu+1 for Lucid/10.04 support/discussion.
[17:39] <maco> Rashless: at least 2 or 3
[17:39] <maco> that i can see right now
[17:39] <eXEddie> Need help please:  i installed ubuntu 9.1 together with ecrpyt on my laptop..i cannot start the desktop afer the loginwindow ...how to handle this?
[17:39] <Trek> !lucid > killown
[17:39] <Trigun> Hi people I have this problem. When i put any dvd in dvd-mechanic  my computer shutdown
[17:39] <maco> shadeslayer: i think you can find tables online listing framebuffer numbers and the resolutions they make
[17:39] <Pici> !fb | shadeslayer there should be a list here
[17:40] <killown> thanks
[17:40] <shadeslayer> maco: well theres 834 for 1440x1050... i have 1440X900
[17:40] <UF-Gast443> got a problem: i've booted from the live CD and tried to instal Ubuntu, but i cant use my mouse and keyboard ???, checked Cd but it says "no errors found" what to do ???? also looked at forum bat couldnt find anything
[17:40] <shadeslayer> Pici: like i said 1440X900
[17:40] <Rashless> how to get package reviewd on revu.ubuntuwire.com ?
[17:40] <Soyo> Windows computers will not connect to samba shares on my lan. It prompts for the password but rejects it. SSH login with the same user/pass combo still works 100% though... It just happened out of the blue.
[17:40] <eXEddie> Need help please:  i installed ubuntu 9.1 together with ecrpyt on my laptop..i cannot start the desktop afer the loginwindow ...how to handle this?
[17:40] <llutz> shadeslayer: use /etc/default/grub
[17:40] <Pici> shadeslayer: Then perhaps that mode doesn't exist.
[17:40] <eXEddie> Need help please:  i installed ubuntu 9.1 together with ecrpyt on my laptop..i cannot start the desktop afer the loginwindow ...how to handle this?
[17:40] <shadeslayer> llutz: yes of course
[17:41] <Pici> !repeat | eXEddie
[17:41] <shadeslayer> Pici: it does..ive used it i think
[17:45] <lgc> ZykoticK9, my gnome-do is working, but I find the quality of the icons rather poor.
[17:45] <scott_ino2> !lucid
[17:46] <apparle> how to allow access to parport without sudo
[17:47] <ZykoticK9> lgc, i think it depends on what icon the app uses - a couple of my icons (Virtualbox OSE for example) look pretty terrible, most look fine.  If you don't like it there are certainly other options out there AWN is popular.
[17:47] <vagvaf> why does ubuntu prefer empathy over pidgin ?
[17:48] <scott_ino2> vagvaf, for many reasons, it integrates with Gnome much better. Plus, users can just uninstall it.
[17:48] <vagvaf> hmm
[17:49] <scott_ino2> vagvaf, you can read about it online, I just uninstall it and be done with it ')
[17:49] <lgc> ZykoticK9, I see, thanks.
[17:50] <rubi> ola
[17:51] <rubi> hay alguien hay
[17:51] <ZykoticK9> !es > rubi
[17:51] <timyeung>  /msg NickServ identify kieph
[17:52] <Pici> timyeung: I suggest you change your password now.
[17:52] <scott_ino2> Pici, ha
[17:52] <scott_ino2> yeah
[17:52] <Pici> timyeung: and consider using a status/server window or even a query with nickserv in the future.
[17:52] <rubi> olaaaaaaaaaaaaa
[17:52] <rubi> mega
[17:53] <apparle> how to allow user to access to parallel port0
[17:53] <llutz> apparle: add him to the right group
[17:54] <raku> alo
[17:54] <raku> jest ktoś z okolic Bydgoszczy?
[17:54] <apparle> llutz: I don't know the right group
[17:55] <llutz> apparle: ls -l /dev/lp0
[17:55] <Pici> !pl | raku
[17:55] <apparle> llutz: I need parport0
[17:55] <mdasilva> is the manager webapp for tomcat6 provided in any of the ubuntu packages?
[17:55] <llutz> apparle: ls -l /dev/parport0
[17:55] <k3Rn> hi
[17:56] <apparle> llutz: how to list all the groups my usr is in
[17:56] <lgc> raku, what is the generic name for Polish banks?
[17:56] <llutz> apparle: groups
[17:56] <Smoove> Is anyone farmilliar with conky?
[17:56] <apparle> llutz: I am in lp group... still problems
[17:56] <anurag89> would there be compatibility issues if i add backtrack repositories in ubuntu 9.04 ... as backtrack 4 is based on ubuntu 8.10 ?\
[17:57] <Soyo> when I try to connect to my ubuntu server from a windows computer on the lan it is saying that multiple connections are not allowed. How can I see who is connected and from where...
[17:57] <Soyo> (samba)
[17:57] <abhinav> hi | k3Rn
[17:57] <abhinav> !hi | k3Rn
[17:57] <harisund> Figured it was too good to last. A2DP stopped working on Ubuntu, there's a bug report raised and no solution to it in sight :(
[17:57] <ZykoticK9> anurag89, probably NOT a good idea
[17:57] <k3Rn> since i upgraded ubuntu from januty to karmic i got an old error. on reboot, i get the error from gdm '... running in low graphics mode'. under januty i did the workaround to use xdm as login-manager. i tryed to switch to xdm under karmic again using dpkg-reconfigure gdm and then select xdm, but then i don't get a login-manager at all... may someone please help?
[17:58] <k3Rn> may i try to get a new driver for my graphics card? or should i try to get xdm to work again?
[17:58] <anurag89> ZykoticK9: so should i manually install the software i want ... would it be fine then ?
[17:58] <Smoove> Anyone farmilliar with conky in BT4?
[17:59] <edbian> Both rtorrent and btdownloadcurses can't connect to the pirate bay tracker.  Can someone help or suggest an alternative torrent site?
[17:59] <abhinav> k3Rn: which graphics card ? try the proprietary drivers if possible for nvidia/ati
[17:59] <kusum> anurag89: are you from iit-bhu ?
[17:59] <anurag89> kusum: no  i am not
[17:59] <kusum> ok :)
[17:59] <ZykoticK9> anurag89, your best bet would be to see if the software you want is already built in a PPA search https://launchpad.net/ubuntu/+ppas for the stuff you're looking for
[17:59] <k3Rn> abhinav: i am not sure what card it is exactly, it a sun x2200 server ...
[17:59] <timyeung> hey I have an hp pavilion laptop with ubuntu 9.10. I had to install the wireless driver through system>pref>hardware drivers. Everything worked fine for a while. last night after i unplugged my computer it stopped working. I am not getting wireless internet on my windows 7 partition either. any ideas?
[17:59] <abhinav> edbian: doesn't piratebay need an account ? btw deluge and transmission are good
[18:00] <abhinav> edbian: vuze is banned in lot of torrent sites - so avoid
[18:00] <edbian> abhinav, I need cli-based client
[18:00] <edbian> abhinav, What is vuze ?
[18:00] <timyeung> abhinav, no pirate bay doesn't need an account...
[18:00] <ori> Is the NEW UBUNTU out?
[18:00] <edbian> abhinav, Since when do you need an account with TBP ??
[18:00] <timyeung> ori not till april
[18:00] <ori> thanx
[18:00] <abhinav> edbian: I asked a question :)
[18:01] <ZykoticK9> ori, 37 more days
[18:01] <anurag89> ZykoticK9: ok
[18:01] <Smoove> Anyone farmilliar with conky in BT4? i'm having display issues and an odd error
[18:01] <anurag89> ZykoticK9: thanks :)
[18:01] <BluesKaj> k3Rn, at the tty or terminal run lspci | grep VGA
[18:01] <edbian> abhinav, I don't think you do :)
[18:01] <ori> IS It Possible THat HP has it already??
[18:01] <edbian> abhinav, Thanks :)
[18:01] <Pici> Smoove: We don't support BT4 here, sorry, try #backtrack-linux
[18:01] <timyeung> hey I have an hp pavilion laptop with ubuntu 9.10. I had to install the wireless driver through system>pref>hardware drivers. Everything worked fine for a while. last night after i unplugged my computer it stopped working. I am not getting wireless internet on my windows 7 partition either. any ideas?
[18:01] <Smoove> ty Pici
[18:02] <k3Rn> BluesKaj: 01:05.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family
[18:02] <flodine> yeah get a thinkpad
[18:02] <everlost> hi there just a silly question, does somebody know where the noback theme for the clear calendar screenlet vanish?
[18:03] <Guest6279> first time here using Linux
[18:03] <Guest6279> seems nice
[18:03] <edbian> Guest6279, It's awesome :)
[18:03] <BluesKaj> k3Rn, sorry dunno that card or where to find a driver for it
[18:04] <everlost> just installed the new version 0.4 and its got only this ugly blue/grey theme, can someone pass me the link, i cannot find it on the interwebs
[18:04] <Myrtti> everlost: what version?
[18:04] <Myrtti> everlost: 0.4? er?
[18:05] <everlost> version of the screenlet?
[18:05] <xuxin> !eee
[18:05] <everlost> v 0.4
[18:06] <Guest6279> quit
[18:06] <Soyo> !samba
[18:06] <everlost> cheers mytti
[18:06] <clrg> Guest6279: To quit, type "/quit"
[18:06] <Soyo> !fml
[18:06] <frankS2> !gml
[18:06] <meitnerium> #/join ubuntu.es
[18:07] <chipcat> do someone know a linux distro so i can see my ct-scan and mri scans ???
[18:07] <clrg> meitnerium: Try it without the leading hash (#)
[18:07] <Myrtti> chipcat: Ubuntu has software to see them
[18:07]  * clrg leaves now.
[18:07] <Losha> timyeung: if it's stopped working in both Ubuntu & Windows, that strongly suggests you've had some kind of hardware failure. If it's under warranty, I'd return it. If it's not, I'd buy a plugin wireless card...
[18:07] <Myrtti> chipcat: try aeskulap
[18:07] <Myrtti> !info aeskulap | chipcat
[18:07] <eremite> I impress myself sometimes.  That is all.  Carry on. -___-
[18:08] <Soyo> when I try to connect to my ubuntu server from a windows computer on the lan it is saying that multiple connections are not allowed. How can I see who is connected and from where...
[18:08] <chuco> hooooolaa
[18:08] <Myrtti> chipcat: this is if your MRI/CT are in dicom format
[18:08] <Myrtti> !es | chipcat
[18:08] <Myrtti> meh
[18:08] <Myrtti> chipcat: sorr about that, mistab
[18:08] <dany_> hi all
[18:08] <timyeung> Losha, any suggestions to see if it is a hardware problem?
[18:08] <sam1> guys im looking to buy a usb tv card any you know that are supported?
[18:09] <chuco> hablas en español
[18:09] <Pici> !es | chuco
[18:09] <dany_> can you tell me why this row in the fstab is wrong: UUID=3F25A6E71FF02081 /media/OTHER ntfs-3g defaults 0 8 ?
[18:09] <everlost> hmm
[18:09] <everlost> o well
[18:09] <dany_> it mounts the partition but at the boot there is an error
[18:10] <chipcat> ok i will try but is there no distribution so i can see them in 3d
[18:10] <dany_> and the system says to modify the fstab by a console
[18:10] <everlost> does someone has any idea where i could find the noback theme for the clearcalendar screenlet
[18:10] <Myrtti> everlost: sorry, I'm not too well versed with the screenlets
[18:10] <chuco> hay alguien hay
[18:10] <Myrtti> chuco: sólo inglés aqui
[18:10] <soulscar> im tring to install ubuntu using pxe but i get stuck in a blak screen any one knows how to solve this problem ?
[18:10] <everlost> i do apologise myself, i know they are silly stuff
[18:10] <Stacole> ;)
[18:11] <Stacole> hi people
[18:11] <Stacole> !!
[18:11] <everlost> yo hablo espanol pero entiendo muy poco de ubuntu
[18:11] <retlaw> how do I see a list of all the available rooms?
[18:11] <chuco> you in espanihs
[18:11] <Losha> timyeung: normally I'd say exactly what you've done: try windows vs. Ubuntu. Since it's stopped working in both, that sort of rules out being a software problem...
[18:11] <eremite> !es | everlost
[18:11] <dany_> no one?
[18:11] <Myrtti> retlaw: /msg alis help
[18:11] <everlost> sorry just kidding bots
[18:11] <Stacole> yo hablo español
[18:12] <everlost> is somehere eventually versed in the fine art of the screenlets, plspls
[18:12] <Stacole> alguien que hable el español?
[18:12] <timyeung> Losha, you really need to say something happier than that.... i'll try windows again....
[18:12] <eremite> !es | Stacole
[18:12] <cole> rrr/who laclasse
[18:13] <Stacole> ok muchas gracias ubottu
[18:13] <chuco> everilost yo si soy chuco
[18:14] <eremite> Speak English, please.
[18:14] <chuco> yo chuco soy españooooooooolllllllllll
[18:15] <ryanrhee90> hi all. i was wondering if strongswan can do DHCP reservation when allocating IP addresses? I want to set certain hosts (by mac address) to the same IP address everytime the machine connects to the VPN
[18:15] <ryanrhee90> (I'm doing IPsec/L2TP, the clients are all macs, and the server is running Ubuntu 8.04 LTS)
[18:15] <ActionParsnip> Yo yo yo
[18:15] <eremite> o hai thar
[18:17] <apparle> llutz:I am still unable to access the parport0
[18:17] <apparle> llutz: I added myself to group lp
[18:19] <Myrtti> apparle: how did you add yourself to that group? using command line?
[18:19] <apparle> Myrtti: adduser apparle lp
[18:19] <ActionParsnip> Apparle: did you log off and on to activate the group add?
[18:19] <apparle> ActionParsnip: I just restarted
[18:20] <ActionParsnip> Apparle: that'l do it
[18:21] <apparle> ActionParsnip: but it did not
[18:22] <apparle> ActionParsnip: how to check whether I have access to parport
[18:23] <ActionParsnip> Apparle: http://ubuntuforums.org/archive/index.php/t-61841.html
[18:23] <ActionParsnip> Says solved
[18:24] <faron> wonder if anybody can help me with this...I am not being allowed to use syaptic because of this...
[18:24] <trg> Hello #ubuntu room :)
[18:24] <faron> E: Type 'Reading' is not known on line 1 in source list /etc/apt/sources.list.d/winff.list
[18:24] <faron> E: The list of sources could not be read.
[18:24] <faron> Go to the repository dialog to correct the problem.
[18:24] <faron> E: _cache->open() failed, please report.
[18:24] <FloodBot3> faron: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[18:24] <faron> Geez...I didn't realize that would be a flood ?
[18:24] <apparle> si there anyway I can check whether I have access to parport
[18:24] <ActionParsnip> Faron: don't flood like that
[18:25] <YurtleTheTurtle> I wonder if anyone can help me with a find command. I want to find all zip files, extract them and then remove the zip files. so far i have "find . -type f -name "*.zip" -exec unzip -o {} \;" this finds and extracts them but, i can't figure out how to get rm function in there too.
[18:25] <faron> It shouldn't have been a flood...It's not that long
[18:25] <purefan> say hi all
[18:25] <ActionParsnip> Faron: open the winff.list file and make sure it is in the same format as /etc/apt/sources.list
[18:25] <vano> Hi guys, i got ubuntu 9.10 fresh installed on a system and I have the gnome-panel freeze bug. Question is, is it a good idea to go with the latest beta version? I really want to get a stable ubuntu installation here.
[18:25] <Mathuin> I'm transferring a v. large file and noticed a little dip in the speed every eight seconds or so on the network history dealiebobber in system monitor.  Any ideas why?
[18:25] <eremite> YurtleTheTurtle: bla bla bla your string fo commands bla bla | rm bla bla bla?
[18:26] <faron> can ya tell me how ta do that actionparsnip ?
[18:26] <ActionParsnip> Yurtletheturtle: add: rm {} ,to the command, i'd ask in #bash
[18:26] <sarthor> Hi, i have ubuntu-server  9.10 installed. squid/dhcp/shorewall 4.4/pppoe-server,  running, i want to put one access point having no security key, that the people can connect, and when they start browsing, so all their browsing redirect to http://192.168.0.100:80, Coz there is my page with detail to get user name and password and use internet,, I am also running pppoe-server,
[18:26] <YurtleTheTurtle> eremite, ActionParsnip thanks
[18:27] <ActionParsnip> Faron: just open both in your favourite text editor
[18:27] <Losha> YurtleTheTurtle: do them in separate passes. In pass 1, unzip all the files. The check that the unzips all worked. Once you're satisfied they unpacked ok, do pass 2, find . -type f -name "*.zip" -exec rm "{}" \; There's nothing worse than doing and unzip+rm only to find out that the unzip failed but the rm worked....
[18:27] <sulle> annyone here know how i can set down my mouse sensitivity?, i have done that in the settings for the mouse. But it is still not enough. please help.
[18:28] <ActionParsnip> Losha; like it ;)
[18:28] <Mathuin> Losha: is there any value in him iterating through each .zip, unzipping it and then rm'ing it only when it is known to have been unzipped correctly?
[18:28] <Losha> ActionParsnip: been there...
[18:28] <Mathuin> I have a similar application which processes hundreds of files individually and I do it that way.
[18:29] <retlaw> how can I see the whole list of available rooms... alis is not really helping
[18:29] <chuco> sorry in spanish
[18:29] <retlaw> I am using empathy
[18:29] <Losha> Mathuin: apart from the extra complexity, which means more room for mistakes, there's nothing wrong with your way either...
[18:29] <Mathuin> retlaw: there's a "room list" triangle in empathy's room join window but it's hit or miss for me.
[18:30] <chuco> yo soy españooooooooollllll españoooooooooollllll
[18:30] <Pici> chuco: #ubuntu-es
[18:30] <eremite> retlaw: it is suggested that you use a real IRC client, not empathy since it does not act like a full IRC client, I am told.  I suggest you download XChat.
[18:30] <Losha> YurtleTheTurtle: actually, I don't even rm them, I move them to a temp directory until I'm *sure*, and then I rm them....
[18:30] <mneptok> !es | chuco
[18:30] <eremite> Losha: that's what I do.  All files go to a /tmp folder before the trash
[18:30] <Losha> chuco is another of those Spanish schoolkids isn't s/he...?
[18:30] <ActionParsnip> Eremite: empathy is a real irc client
[18:31] <faron> actionparsnip...winff.list appears to have absolutely nothing in it
[18:31] <Seven_Six_Two> is there a way to throttle my http downloads (9.10/any browser) so that I don't irritate my school's IT dept?
[18:31] <Losha> eremite: nothing worse then spending hour downloading files and then rm'ing them by mistake after an unpack failure...
[18:31] <eremite> ActionParsnip: I thought it was just like a basic IM but lacking in most commands and functionality.  I wouldnt know, like I stated in my previous statement, I dont use it.
[18:31] <Mathuin> eremite: the only real probelm I've noticed with Empathy is that slash-commands don't work from the chat window.  That's more of a me-training than software-bug though.
[18:32] <eremite> I switched from Xchat to irssi, much more powerful from my understanding of the documentation.
[18:32] <Mathuin> Seven_Six_Two: the term for what you want is "traffic shaping".
[18:32] <sam1> irssi >
[18:32] <sarthor> Hi, i have ubuntu-server  9.10 installed. squid/dhcp/shorewall 4.4/pppoe-server,  running, i want to put one access point having no security key, that the people can connect, and when they start browsing, so all their browsing redirect to http://192.168.0.100:80, Coz there is my page with detail to get user name and password and use internet,, I am also running pppoe-server,
[18:32] <chuco> donde se escribe lo que me as dicho ubottu
[18:32] <Mathuin> eremite: irssi is what I use when I am on FreeBSD because I am 100% xterm/CLI there.
[18:33] <Seven_Six_Two> Mathuin, ok thanks
[18:33] <mneptok> chuco: /join #ubuntu-es
[18:33] <ActionParsnip> Eremite: the app has connected to the irc service and is sending the right packets to the server. Therefore it is an irc client
[18:33] <mneptok> ai caralho.
[18:33] <erUSUL> mneptok: :D
[18:33] <retlaw> ok, i'll try it out. thx
[18:33] <ActionParsnip> Eremite: some have more functionality but it doesn't make them more of a client. Its still an irc client
[18:33] <eremite> Mathuin: interesting, I was just chatting about switching to a BSD distro for all CLI work just earlier today in #linux
[18:33] <YurtleTheTurtle> with unzip, is there a way to get duplicat files to be automatilcy renamed (add a number or some such)
[18:34] <ukebane> Question: I just uninstalled xfce because I decided to stick to gnome, how do I change the splash screen back?
[18:34] <ActionParsnip> !splash | ukebane
[18:34] <ukebane> ActionParsnip, thanks
[18:34] <gylan1979> hi..... i want to ask is there any way to reconfigure display card driver and setting to default???
[18:35] <faron> actionparsnip...winff.list appears to be completely empty...what do I do ? Do you know ?
[18:35] <erUSUL> gylan1979: remove or move your xorg.conf file
[18:35] <ActionParsnip> Faron: delete the file then
[18:35] <chuco> sorry in mi d´ont no en eglish
[18:35] <eremite> !es | chuco
[18:35] <Myrtti> chuco: /join #ubuntu-es
[18:36] <gylan1979> erUSUL: oic thanks....do i need to restart the system after all.
[18:36] <gylan1979> erUSUL: oic thanks....do i need to restart the system after all.?
[18:36] <faron> hmmmmmmm okay...you think I'll be able to use synaptic after that ?
[18:36] <x2xx2nd> Hi people.... in one of my folders i canNOT see the files though the file broswer  but i can see them through  the bashshell  ... what is going on?? these files arenot hidden!!!
[18:36] <chuco> pero donde se escribe coño
[18:36] <erUSUL> gylan1979: alt + sysrq + k may work
[18:36] <erUSUL> chuco: en el mismo sitio que escribes lo demas
[18:37] <Losha> erUSUL: wow, didn't know you spoke Spanish...
[18:37] <eremite> gylan1979: you do not need to restart the system, you just neeed to retsrat X.  alt + sysRq + K to retsrt x, or just log out and log back in.
[18:37] <Arkava> hi, im having problems installing gloobus-flow, can someone help me?
[18:37] <dinesh_> need help ?
[18:37] <eremite> !ask | Arkava
[18:38] <ActionParsnip> X2xx2nd: check the ownership and permissions on the folder
[18:38] <dinesh_> how to make cam utility work in xubuntu
[18:38] <erUSUL> Losha: i'm spanish
[18:38] <chuco> ¡aaaaa bale tio o tia!
[18:38] <gylan1979> erUSUL: oic...thank u so much...i try 1st.
[18:38] <eremite> dinesh_: have you tried the program "cheese webcam booth"?
[18:38] <erUSUL> gylan1979: no problem
[18:38] <ActionParsnip> Dinesh_: does it work in cheese?
[18:38] <gylan1979> eremite: thanks too... :P
[18:38] <dinesh_> thanks eremite ...i will try now
[18:38] <Losha> erUSUL: I didn't know. Isn't cono a naughty word for a schoolboy?
[18:38] <dinesh_> i am new at ubuntu thing! lol
[18:39] <ukebane> ActionParsnip, I'm afraid I may have used the wrong terminology, I meant the screen you get on logging in, not after entering gnome.
[18:39] <edbian> dinesh_, Ubuntu is the best! :)
[18:39] <Arkava> okey, when i 'make' the folder it returns /home/castro/gloobus-flow/src/clutter-black-texture.cpp:40: undefined reference to `cogl_rectangle(float, float, float, float)'
[18:39] <Arkava> collect2: ld returned 1 exit status
[18:39] <Arkava> make[1]: *** [gloobus] Error 1
[18:39] <Arkava> make[1]: se sale del directorio `/home/castro/gloobus-flow/src'
[18:39] <FloodBot3> Arkava: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[18:39] <dinesh_> yeah ....i am loving it
[18:39] <x2xx2nd> ActionParsnip, thereis no permission to block me!!
[18:39] <ActionParsnip> Losha: I think its spanish lady bits ;)
[18:39] <dinesh_> hey one more problem if you can solve !
[18:39] <erUSUL> Losha: well is a naughty word but not uncommon in schoolboys; sadly
[18:39] <chuco> el que se escribia
[18:39] <ActionParsnip> X2xx2nd: i'd run: ls -la folder ,to check
[18:39] <dinesh_> i have installed it via wubi installer with fixed 5 gb space , now tell me how to increase its memory space
[18:39] <Losha> ActionParsnip: that's what I thought. Wash his mouth out with jabon...
[18:40] <erUSUL> chuco: por ultima vez; sino te hecharan de aqui. Escribe "/join #ubuntu-es" (sin comillas) y dale a enter.
[18:40] <dinesh_> besides  i am unable to access my windows drives
[18:40] <Zer> Is there any problem with transferring an Ubuntu hard drive to a new PC?
[18:40] <ActionParsnip> Losha: lavate las manos
[18:40] <faron> actionparsnip when I move mouse to "edit" to delete "delete" is greyed out
[18:40] <Zer> or will it boot fine?
[18:40] <ukebane> ActionParsnip, I think it's the usplash I'm talking about, but I found a link, thanks anyway
[18:40] <erUSUL> Zer: no; there should be little problem. you may have to move or remove the xorg.file
[18:41] <Zer> I am using Ubuntu Server
[18:41] <Zer> It does not have X11
[18:41] <erUSUL> Zer: then there should be no problem
[18:41] <Losha> ActionParsnip: you know, given that there are tons of spanish schoolkids with sudden access to #ubuntu, maybe someone should give them their own channel. I'm sure they'd love to charla with each other...
[18:41] <Zer> It will boot fine? I am going from a nVidia motherboard AMD to a Supermicro motherboard Intel Nehalem, so  it's a bit of a change
[18:41] <x2xx2nd> ActionParsnip, i ve checked... I do have r+w permisions on the file and the content
[18:41] <Zer> No driver issues  I need to worry about before switching a la Windows?
[18:42] <Mathuin> Zer: if you're moving a 64-bit install to a 32-bit system, that could be exciting.  Also if your disk doesn't have swap because your old system had tons of RAM and your new system doesn't, that could also be exciting.
[18:42] <Myrtti> Losha: there is no way of automatically making them join a channel. Giving them a guide how to join a spanish channel is the best we can do.
[18:42] <erUSUL> Losha: ActionParsnip a bug has been open against the distro they are using and they are going to fix it really soon; or so they said
[18:42] <ActionParsnip> Zer: should be fine as long as you haven't removed the driver packages
[18:42] <ActionParsnip> Faron: use: gksudo nautilus
[18:42] <ActionParsnip> Faron: the file is owned by root so your user will not have delete access. Using gksudo will give the app the power you need
[18:42] <edbian> Zer, The drivers are called modules and they're built into the ubuntu kernel
[18:42] <faron> thanks
[18:42] <ActionParsnip> Erusul: what distro? What bug?
[18:42] <Zer> Nothing particular to whether  ACPI is enabled, all that?
[18:42] <Zer> Hmm. Ok
[18:43] <eremite> ActionParsnip: somone said to use gksudo instead of sudo for particular tasks.  Do you have a link to info about that?
[18:43] <eremite> !gksudo | eremite
[18:43] <flodine> anyone running ubuntu with ACPI off?
[18:43] <Losha> erUSUL: that's good there's a bug open. I just thought it might satisfy everyone involved to autoforward them to the 'spanish schoolkids channel'...
[18:44] <x2xx2nd> ActionParsnip, Instead of my problem i would like to ask.... is there any particular recognising issue from windows files to Linux.... i know there is from linux to Win
[18:44] <ActionParsnip> Zer: the kernel handles that. Iif you are using the generic kernel it will be fine
[18:44] <ActionParsnip> X2xx2d: recognising what?
[18:45] <eremite> x2xx2nd: my linux machine can read all of my NFTS partitions with no problems.
[18:45] <erUSUL> ActionParsnip: sent the bug in private
[18:45] <Zer> It's the Ubuntu server kernel. So not entirely generic, but I imagine it's not too odd
[18:45] <AsherSevyn> Hello everyone
[18:45] <Zer> Still, I'll give it a shot. No real way  to test before I send it off anyway
[18:45] <flodine> i seem not be able to run 9.1 with my acpi on i have to sell the laptop
[18:45] <x2xx2nd> eremine ok
[18:46] <flodine> help
[18:46] <AsherSevyn> Anyone here have experience setting up Ubuntu as a file server in a windows domain?
[18:46] <Mathuin> Zer: based on the hardware you described, I doubt there will be an issue.  They're both commodity boards.
[18:46] <erUSUL> !samba > AsherSevyn
[18:46] <ActionParsnip> X2xx2nd: please use full details in future. 'Recognise' without context is meaningless
[18:47] <ukebane> ActionParsnip, used startupmanager to fix my problem
[18:47] <Keeage> can someone help me to connect to an irc server?
[18:47] <ActionParsnip> Ukebane: nice. I'd have just uninstalled the splashes to use text boot :)
[18:47] <ukebane> uhm, you're here now?
[18:47] <faron> I at least now have the root file system open...now do you know where I'll find this file ? {winff.list}?
[18:47] <Keeage> different server
[18:47] <Losha> Keeage: which server? Usually /server <servername> does it....
[18:47] <x2xx2nd> ActionParsnip, i mean to 'see' - be visible to the system
[18:47] <ukebane> ActionParsnip, well I did turn it off in the startupmanager
[18:48] <llutz> faron: /etc/apt/sources.list.d/
[18:48] <puff> Hey, I'm seeing a lot of network traffic on my router, and there don't seem to be any strangers on my WLAN.   In fact, the dd-wrt "Active clients" display seems to say *I* am using most of the connections.  Could I: be running some sort of networking app that I'm not realizing?
[18:48] <Keeage> trying to access irc.hackthissite.org port 7000.  "keep getting remote host closed connection"
[18:49] <fwaokda> why wont my bash script remove a file but if I do the same command in shell it will remove it?
[18:49] <erUSUL> puff: use "netstat -putan" to list all your connections ...
[18:49] <ActionParsnip> Faron: it was in your first text. If you rerun: sudo apt-get update ,you will see
[18:50] <serverduck> I tried to  browse with firefox on ubuntu a page and i get This Connection is Untrusted. the site is a math site with simple html pages...what should i do?add the site to exceptions?
[18:50] <faron> and I'm supposed to just delete that one ? the one that says Reading package lists...
[18:50] <faron> Building dependency tree...
[18:50] <faron> Reading state information...
[18:50] <gylan1979> hi....is there anyone tell me why my ati catalyst control center cannot be lauch? it comes out with error msg that no ati graphic driver is install or ati driver not functioning well...
[18:50] <faron> oops sorry
[18:50] <Losha> puff: run ps ax to see what processes are running on your system. Also netstat -an. If you can't make sense of it, paste them to http://ubuntu.pastebin.com and we'll look at it with you
[18:52] <Keeage> I can connect to a server on irc, but I keep recieving a "remote host closed connection"  do I need to enter my site login and password?
[18:52] <Trek> Keeage: it means you're getting kicked off by the server or that you can't connect, go to smewhere else though, this is Ubuntu support
[18:53] <Losha> Keeage: It may be temporarily overloaded. Which server?
[18:53] <gylan1979> hi....is there anyone tell me why my ati catalyst control center cannot be lauch? it comes out with error msg that no ati graphic driver is install or ati driver not functioning well...
[18:53] <gylan1979> please....
[18:53] <seek3r> My wifi devices are not working, my network  settings say that the wireless connection is in roaming mode but doesnt display any wireless network connections
[18:54] <puff> Losha: http://ubuntu.pastebin.com/Wk7c3Bbq
[18:55] <Keeage> Trek, sorry using ubuntu to try to connect, my bad
[18:55] <Keeage> losha, irc.hackthissite.org port 7000
[18:55] <CartoonCat> anyone know how to get apt to remove, or install, a package when its complaining about not being able to find a package ?
[18:56] <llutz> CartoonCat: you cannot remove something not being installed
[18:56] <Keeage> losha, is it a problem on there end?
[18:56] <CartoonCat> llutz: well thats the problem, its in some kind of quasi installed state
[18:57] <CartoonCat> i want to A) finish installing B) remove it
[18:57] <puff> Keeage: Connection closed by remote host indicates it's a problem on the remote server, but why the remote server chose to close the connection is anybody's guess.  Maybe you needed to log in, maybe they were out of resources, maybe god hates you.
[18:57] <puff> Keeage: AFAIK, most IRC servers require you to log in.
[18:58] <Keeage> puff I wonder about the hating part daily
[18:58] <puff> Keeage: After a few minutes of no attempt to login, most server implementations would probably close the connection to free up resources.
[18:58] <warriorforgod> puff: Are hosting your own website or is it hosted elsewhere?
[18:58] <puff> Keeage: automatically.
[18:58] <puff> warriorforgod: Come again?
[18:58] <puff> warriorforgod: I have a colo.
[18:58] <chuco> hay alguien que hable español y si hay que se quede porfabor solo unos minutos
[18:59] <gylan1979> my google earth cannot start?? please help///
[18:59] <Keeage> puff, could you tell me where to enter my login info, I'm using xchat.
[18:59] <warriorforgod> puff: Just thought the pages were loading kind of slow, and that could be a cuase for network activity.  Just throwing out ideas.
[18:59] <puff> warriorforgod: Well, sa of a c ouple weeks ago, now it's a virtual server.  Blech.  My friend sold off his networking business.
[18:59] <puff> warriorforgod: Which pages
[18:59] <Mathuin> Silly Empathy question: is there a way to switch between tabs in a window from the keyboard, without using the mouse?
[18:59] <gylan1979> my google earth cannot start?? please help???
[18:59] <Losha> puff: I'm no expert, but it looks normal enough to me for a busyish box. What's all the gvfs stuff for?
[18:59] <warriorforgod> puff: Noticed it on the articles.  Not incredibly slow, maybe 5 to 10 seconds to load a page.  I am inpatient though.
[18:59] <Sa[i]nT> Mathuin, Control+tab, or Control + (number of tab)
[18:59] <puff> warriorforgod: Darksleep.com?  That's not running in the same network.  I'm irc'ing from my colo, but the network problem is in my local network.
[19:00] <CartoonCat> llutz: no ideas then ?
[19:00] <puff> warriorforgod: Hm, dunno, I was noticing that last night but I thought that might be transient network congestion at the coffeehouse I was at.
[19:00] <warriorforgod> puff: Ahhh.  Makes more sense now.
[19:00] <Sa[i]nT> Mathuin, I mean Alt+ (number of tab)
[19:00] <Seven_Six_Two> Mathuin, thanks again. I installed tcprelay. I can proxy connections to specific servers and shape only that connection. And all this in userspace with changes that can be made on the fly
[19:00] <llutz> CartoonCat: not really, try "sudo aptitude -f install"
[19:00] <Mathuin> Seven_Six_Two: I'm glad I was able to help.  May your downloads stay under the radar. :-)
[19:00] <gylan1979> my google earth cannot start?? please help???
[19:00] <gylan1979> my google earth cannot start?? please help???
[19:00] <Losha> Keeage: I can't connect either. I think they're overloaded...
[19:00] <CartoonCat> yea done did that
[19:00] <puff> Losha: gvfs, I have no idea.
[19:01] <Mathuin> Sa[i]nT: tried Control and numbers as well as Control Tab and didn't have any luck.
[19:01] <CartoonCat> apt wont do anything till this package dependancy is resolved, the problem is THATS the package im installing
[19:01] <puff> Losha: Google says gnome virtual file system.
[19:01] <Seven_Six_Two> Mathuin, well I don't care if they see them (10.04 beta) but they'll kick me if I choke everyone else out.
[19:01] <warriorforgod> puff: That is correct.  It is normal.
[19:01] <CartoonCat> HandBrake-svn3154-Ubuntu_GUI_x86_64.deb had a depanacy, broke install, NOW apt says its handbreak-gtk
[19:01] <puff> Losha:  This is just a fairly vanilla 8.10 install.  I need to upgrade it, but first I need to resize my partitions, and before I do *that* I need to back up my drive, and before I do *that* I need to figure out wtf my roommate did with the power supply to my USB enclosure.
[19:01] <puff> Sigh.
[19:02] <llutz> CartoonCat: "sudo dpkg -P package"
[19:02] <Losha> puff: I have one too, but I don't use it. I was wondering what it was for. More useless gnome machinery I'm guessing...
[19:02] <CartoonCat> i can not get apt to install <any other packages> such as <deselect> till this is fixed
[19:02] <Mathuin> Seven_Six_Two: I have something like that going for BitTorrent.
[19:02] <CartoonCat> llutz: ah one sec
[19:02] <puff> Well, ddw-rt bandwidht monitor says we're using 1-2 MBPS, there are three machines live and none of them are knowingly running bittorrent or anything.  dd-wrt "Active Clients" panel says _my_ machine (surprise surprise) is using 14% of the 4096 connections, which made me wonder wtf?
[19:03] <CartoonCat> ffs
[19:03] <CartoonCat> same error as apt-get
[19:03] <Seven_Six_Two> Mathuin, yeah, ktorrent has it built in. It took my school's proxy about 10 seconds to 2 hour ban me for initiating a torrent connection. I'll save that for home.
[19:03] <CartoonCat> http://pastebin.org/121264
[19:03] <Mathuin> Seven_Six_Two: Crazy!
[19:04] <llutz> CartoonCat: there are some "force" options for dpkg (man dpkg), maybe they help. but it's always dangerous...
[19:04] <CartoonCat> at this point idgaf lol, this is anoying
[19:04] <puff> Losha: googlepedia says that GVFS is a replacement for FUSE.  FUSE, if I recall correctly, is a virtual file system thing, it's an abstraction/adaptor layer that lets you do stuff like mount a network drive, etc.
[19:04] <CartoonCat> and i did try aptgets force, same issue
[19:05] <llutz> CartoonCat: can you manually download that .deb and reinstall it with dpkg?
[19:05] <llutz> CartoonCat: or take it from /var/cache/apt/archives
[19:05] <Losha> CartoonCat: if all else fails, go to /var/lib/dpkg/status and delete the paragraph(s) pertaining to handbrake. Make sure you keep a backup of the original file in case you mess up. The system should then forget all about handbrake and you can try reinstalling...
[19:06] <CartoonCat> llutz: i HAVE that .deb, the probelm is the .deb is call ed one thing, while apt calls it something else (yes, it is the smae one cause in aptitude it has the svn version correct)
[19:06] <Losha> puff: that sounds right...
[19:06] <CartoonCat> ooh now that seams like the crowbar im after
[19:06] <puff> Well wtf.
[19:06] <puff> Hm...
[19:06] <puff> I'm still seeing 10% active connections usage from my machine.
[19:06] <Mathuin> Sa[i]nT: your suggestion works in 2.29.2, which was released in November, but that's not the version that I'm using.  Gotta fix that.  Thanks!
[19:06] <Losha> CartoonCat: it's a sledgehammer. Go carefully...
[19:06] <Anca> Good evening, I have installed Ubuntu on a Thinkpad X31 and gives me a grub error, and I don't know how to deal with this, can you help please?
[19:07] <Sa[i]nT> Mathuin, Well, it's still working for me.
[19:07] <sll> hello!
[19:07] <sll> I'm up to 6 linux systems on different partitions on a single disc. One contains the grub. When installing a new kernel in each other not updated the menu, as each believed to have the grub. Could you provide me any link or information on how to resolve this situation?
[19:07] <sar> ola
[19:07] <sar> k tal
[19:07] <sar> como estas
[19:07] <sar> soy de madrid
[19:07] <sar> y tu
[19:07] <FloodBot3> sar: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[19:08] <enzo> hi
[19:08] <Mathuin> Sa[i]nT: I believe you.  I'm upgrading now. :-)
[19:08] <sar> tu
[19:08] <enzo> i'm on karmic, someone knows the name of the next ubuntu release ?
[19:08] <Pici> !es | sar
[19:08] <Losha> sll: it's annoying, but in your place, I maintain grub by hand editing....
[19:08] <enzo> is that lucid ?
[19:08] <Losha> !lucid | enzo
[19:09] <sar> dgdggdngh
[19:09] <melany> ola sofy
[19:09] <Losha> !es
[19:09] <dany__> hi all
[19:09] <enzo> i'd like in fact to install wget 1.12 from lucid on my karmic, you think i can just install package from lucid ?
[19:09] <dany__> I have this error on boot: error while executing fsck.3g-ntfs
[19:09] <dany__> I have modified the fstab with this row:
[19:09] <sll> Losha: yes I know this way... only if exists another way ;)
[19:10] <Blondy> hi, is there any vdpau support for Totem? i can't find a configuration file
[19:10] <selofi> does anybody tell me the name of ubuntu spanish chanel
[19:10] <melany> illo kien soys
[19:10] <Losha> sll: good luck...
[19:10] <dany__> UUID=6DD7C69A32A58C6E /media/WIN7 ntfs-3g defaults 0 2
[19:10] <llutz> !es
[19:10] <dany__> it seems ok the row
[19:10] <melany> hola
[19:10] <dany__> it is very strange
[19:10] <melany> hola dani
[19:11] <alinz1> what do you guys think? i5 3.33Ghz beat a Xeon 2.66?
[19:11] <dany__> hola melany
[19:11] <sanguisdex1> where can I find a change log for chages in the gnome term since ver 8.10
[19:11] <ZykoticK9> Blondy, doesn't look like https://launchpad.net/~nvidia-vdpau/+archive/ppa has anything for Totem
[19:11] <llutz> dany__: boot into windows, make a filesystem-check
[19:11] <dany__> llutz: from linux, no possibility to do it?
[19:12] <Losha> dany__: only windows can do a full system check on an ntfs volume, sorry...
[19:12] <llutz> dany__: idk
[19:12] <dany__> Losha: yes but it is not normal that is not possible to change the fstab from linux
[19:13] <llutz> dany__: you fstab sounds ok, fsck on boot fails
[19:13] <zleap> anyone remember a linux program designed for tablet pcs,  that gave you a variety of papers to use,  lined, graph, plain, you could use a mouse but was designed for tablets, so i guess a stylus or similar
[19:13] <Blondy> ZykoticK9, there is something there about totem, i already googled and found that page. the thing is i dunno what's the difference between totem and 'Totem-Xine' they mention. Also that page is old because there isn't any totem config in my .gnome2 folder like they say. but thanks
[19:13] <dany__> llutz: ok
[19:13] <dany__> Losha: ok I'll try
[19:14] <llutz> dany__: sounds like an unclean fs and has to be checked from win
[19:14] <Losha> dany__: I agree with llutz. The problem is with the filesystem, not /etc/fstab...
[19:14] <dany__> so strange
[19:14] <NinoScript> Blondy: It's the library that they use for the actual decoding of videos
[19:14] <dany__> I'll check it
[19:14] <dany__> thanks :)
[19:14] <Roasted_> Here's a fun question. I dual boot Ubuntu and XP Pro on my laptop. I installed Kubuntu behind Ubuntu on a separate partition. My hard drive looks like this: XP Pro, Ubuntu, Kubuntu. If I delete Kubuntu, will I have to recover Grub? Or will Ubuntu/XP Pro still work fine?
[19:14] <Myrtti> zleap: soundls like xournal
[19:14] <zleap> thats it thanks
[19:15] <llutz> Roasted_: where did you write kubuntus grub?
[19:15] <Blondy> NinoScript, so vdpau should work just fine if i find the damn config that isn't there, right ?
[19:15] <Roasted_> llutz, No idea, to be honest. I just did the usual partitioning mode... so whatever the default is......
[19:15] <NinoScript> Blondy: It seems that Xine is better for something than the other, but it has been discontinued, as the other is modular and that will make it better in the future
[19:15] <NinoScript> Blondy: at least, that's what I read about it
[19:15] <llutz> Roasted_: MBR, partition?
[19:15] <wols> Roasted_: depends where your grub is. I'd run grub-install ubuntu
[19:15] <Losha> zleap: no idea, but I found this on google: http://en.wikipedia.org/wiki/Tablet_PC#Linux
[19:15] <zleap> its xournal
[19:16] <zleap> i recognised the name when i saw it
[19:16] <NinoScript> Blondy: I have no idea what vdpau is, sorry :P
[19:16] <Blondy> i see, NinoScript ... i like it because i get on some HD files better playback thank in mplayer
[19:16] <Blondy> NinoScript, vdpau is a renderer
[19:16] <Losha> zleap: you're welcome
[19:17] <NinoScript> Blondy: ohh, I'm a new linux user, so there's still a lot of things I don't know about :P
[19:17] <Blondy> me too heh :)
[19:17] <ZykoticK9> NinoScript, vdpau is very cool - it uses Nvidia gfx hardware to render video
[19:17] <deserteagle> hello people :D
[19:18] <testerce> nazdar
[19:18] <AnAnt> Hello, is there a faxing tool (preferably a simple command line tool) in Ubuntu ?
[19:18] <deserteagle> i'm having severe grub issues (a whole bunch of them) please help, i can't boot into the desktop :(
[19:18] <llutz> AnAnt: efax
[19:18] <deserteagle> AnAnt, faxzero.com
[19:18] <NinoScript> ZykoticK9: :O I guess I'll have a look at that, is there any page that you recommend for some light reading? or should I just google it? ;P
[19:19] <ZykoticK9> NinoScript, sorry i don't have any page recommendations...
[19:19] <Losha> AnAnt: http://www.gotfreefax.com/
[19:19] <AnAnt> llutz: that's nice
[19:19] <AnAnt> llutz: thanks
[19:19] <ninjix> I'm trying to implement likewise-open5 for my office. The ubuntu doc https://help.ubuntu.com/9.04/serverguide/C/likewise-open.html works for getting the systems into Active Directory but I'm wondering how an integrated Ubuntu user changes their AD password. Anyone have experience with this?
[19:22] <pabelanger> Anybody know if ubuntu cross-compiling powerpc packages or is host machine running powerpc?
[19:22] <deserteagle> i'm getting a grub error: out of partition, even though /boot is in a separate partition, only 500 megs big
[19:23] <ZykoticK9> ninjix, if you don't get an answer here you might want to ask in #ubuntu-server
[19:24] <Mathuin> Okay, updated Empathy to some bleeding-edge not-even-properly-signed version, and I can bounce between tabs.
[19:24] <kenpark> Hi - so i am wondering: How do I share folders between two ubuntu installations (server+desktop)?
[19:24] <llutz> kenpark: ssh(scp/sftp), nfs, samba
[19:25] <themiddleman> kenpark, you can go places > connect to server to ftp or ssh servers
[19:25] <ninjix> ZykoticK9: thanks. little quiet in there
[19:25] <kenpark> llutz: hehe, 2x ubuntu = samba? Sounds strange.
[19:26] <Losha> kenpark: for a one time copy, ssh. If you want the filesystems to look the same from both machines, nfs. It you need to talk to windows machines also, samba...
[19:26] <llutz> kenpark: sure, but can i know if you intend to get win-boxes into your net in future
[19:26] <kenpark> llutz: i have another windows machine on there
[19:26] <kenpark> i want to share music with our music-playing-kitchen-ubuntu-server :-)
[19:27] <kenpark> i thought it wouldn't be the ubuntu way to use samba from the other ubuntu, but I guess.
[19:27] <Mathuin> kenpark: interoperability is a wonderful thing, as is planning for the future.
[19:28] <kenpark> Mathuin: ah i always considered samba some kind of half-working-thingy in order to talk to windows ^^
[19:28] <Mathuin> kenpark: it's actually pretty darned stable and thanks to Windows a bit of a commodity solution.
[19:28] <themiddleman> is there a way to edit keyrings on xubuntu, I am connecting to a gvfs share and the password stored is outdated and doesnt update
[19:29] <llutz> kenpark: samba is underrated
[19:29] <Losha> kenpark: yes, that would be a good description. Actually, it works ok, but it's a nightmare to configure...
[19:29] <Mathuin> Losha: once it gets running, it's very robust.  has to be. :-)
[19:29] <kenpark> Losha: ah i got that taken care of already :-)
[19:31] <Losha> kenpark: so then you only have to decide between nfs and samba. If need be, i.e. you add a windows machine later, you can run both...
[19:31] <llutz> or use microsoft services for unix :)
[19:33] <Losha> llutz: I used that one. It actually worked once you got past the configuration difficuties...
[19:33] <Losha> llutz: one -> once
[19:34] <toyman61> hello!
[19:35] <llutz> Losha: i had that on my wifes notebook, worked fine there. but most people just don't know that nfs-clients for win exist
[19:35] <toyman61> I have a question about Ubuntu 9.10 and D-Link DWA-140 USB Adapter. Anyone ?
[19:36] <Azelphur> !ask | toyman61
[19:36] <codeshah> hey guys, I have a python script that I am running on my VPS [ubuntu]... but I am wondering how can I let it run even if I log out of the VPS? anyone know?
[19:36]  * SnowmanX11 is away: SnowmanX11 is away. / Valamin mókolok, majd jövök!
[19:37] <llutz> codeshah: use screen or nohuup
[19:37] <llutz> nohup
[19:37] <erUSUL> !away > SnowmanX11
[19:37] <Zer> Is there an insmod ext4?
[19:38] <Zer> I notice I got insmod ext2 for my LVM ext4 partition in GRUB
[19:38] <korogiannos> Hi. Which is less prone to "undesired behavior" when deleting and reformating a used hard disk: palimpset or gparted? or is there an alternative?
[19:38] <harisund> Does anybody here use A2DP? It used to work, stopped working, and there's a bug report filed in Launchpad, and it's not fixed. Why are there sooooooooooooooooo many unfixed bugs? Why force 6 month releases if bugs aren't going to be fixed?
[19:39] <toyman61> D-Link DWA-140 USB Adapter on Ubuntu 9.10. It works OK, but I only get 54 Mbps transfer rate. Do I have to recompile the driver to get 300 Mbps ?
[19:39] <Guest2032> hello, this may be a silly question, i have a lenovo ideapad u330 w/ dual processors and 3gb ram, is there a difference in speed between 32bit and 64, or would it not matter?
[19:39] <llutz> harisund: wrong channel, ask the devs
[19:39] <mickster04> toyman61: are yu sure your router is n compatible
[19:39] <Zer> Anyone know?
[19:39] <Cyber_Akuma> Guest2032: you mena dual core?
[19:39] <Guest2032> yes
[19:40] <toyman61> My router is a DIR-655 and is indeed n compatible. This adapter has been used with a Windows-installation and worked on 300 Mbps there..
[19:41] <toyman61> mickster84: Yes, my router is n compatible. No doubt about that.. :-)
[19:41] <mickster04> toyman61: ok no idea, was just checking...
[19:42] <mickster04> !tab | toyman61 (for future reference)
[19:42] <izmanromli1> anyone knows a decent Git client desktop-based in Jaunty?
[19:42] <pedritoloko> hola soy pedro,de san fernando (cadiz)
[19:42] <toyman61> mickster84: It seems to me I have to download a new version of the driver and recompile it to the kernel..
[19:42] <jad> chown problem, Im doin it right. The verbose output of:    sudo chown jad:jad -R /media/SW_Preload/Storage/Music/* -v      gives me that it changed ownership of all the files in the directory. I go to a file it tells me ownership was changed for but it still has the old ownership
[19:42] <jad> help ?
[19:42] <mickster04> toyman61: yeah prolly, its 04 not 84
[19:43] <pedritoloko> alguienhabla español?¿
[19:43] <jrib> jad: what filesystem?
[19:43] <toyman61> mickster04: Sorry.. :-(
[19:43] <CR0W> Hi, how to add 'programming' sub menu to the menu in ubuntu karmic?
[19:43] <mickster04> toyman61: thats better, i can see it better:D
[19:43] <jrib> CR0W: right click on ubuntu menu icon -> edit menu  should work
[19:43] <Losha> harisund: It seems there are always more bugs than fixes. Presumably someone did triage on the bug and decided it was not high enough priority to fix...
[19:43] <toyman61> mickster04: Typo error..
[19:43] <blackxored> hi guys I'm installing karmic at a HP notebook, it went properly until the user setup stage, now it's stuck in there, I wondr if i can reboot it????
[19:44] <blackxored> or should I wait?
[19:44] <mickster04> CR0W: its the admin, you have to show programs in that catagory for it to show, it wont exist if its empty
[19:44] <mzawieska> hello I have question. I need program for ubuntu that is going to tell me what is the temperature for my GPU CPU etc?
[19:45] <blackxored> the last log output is that from gpasswd adding my user to group admin, the one used by sudo
[19:45] <CR0W> mickster04 what do you measn?
[19:45] <jrib> !sensors | blackxored
[19:45] <blackxored> jrib, that wasn't for me
[19:45] <blackxored> !sensors ! mzawieska
[19:45] <blackxored> !sensors | mzawieska
[19:45] <mickster04> CR0W: well if there are no programs that fall under that category it wont show
[19:45] <CR0W> mickster04 yes there is, python.
[19:45] <jrib> blackxored: thanks
[19:46] <jrib> CR0W: python is an interpreter, it wouldn't show up in the gui menu
[19:46] <CR0W> mickster04 ok I select the option but 2 seconds later it switches back to unselected, what to do?
[19:46] <mickster04> CR0W: well show that and the category will appear, you cant make a category (programming internet etc) show without contents
[19:46] <puff> Hey, I"m finally locking my wifi down, due to certain behaviors of my users.  IS wpa2 personal the recommended mode?
[19:46] <jad> jrib, NTFS
[19:46] <mickster04> puff: yeah
[19:46] <jrib> jad: well ntfs doesn't have unix-like permissions.  Set the ones you want at mount time
[19:46] <jrib> !ntfs > jad
[19:46] <mickster04> CR0W: im not sure....
[19:47] <CR0W> mickster04 anyway I noticed that soem options in ubuntu when I changer them they change back aftyer about 2 seconds.
[19:47] <DexterF> hi
[19:48] <jooiiee> Im having problems changing my password using the GUI, can someone help me do it in the terminal?
[19:48] <mickster04> CR0W: why do u want to show it?
[19:48] <DexterF> can't get sound in ScummVM, anyone else got this? alsa, no pulse
[19:48] <mickster04> jooiiee: that is somethin you could have googled, its a one line solution
[19:48] <mickster04> jooiiee: give me a sec
[19:48] <llutz> jooiiee: open a terminal, type "passwd " and follow instructions
[19:49] <mickster04> llutz: cheers
[19:49] <jooiiee> mickster04, sorry
[19:49] <jooiiee> llutz, thx m8
[19:49] <mickster04> jooiiee: no need to apologise,
[19:50] <CR0W> mickster04 nevermind, you wrer right, in programing python wasnt selected.
[19:50] <mzawieska> any other programs? you guys recommend for fan etc temperature because I gotta see if my two fans for CPU and GPU works in my laptop
[19:50] <CR0W> mickster04 is there a list of known karmic bugs?
[19:50] <tio> ola
[19:50] <Wipster> hey all, can someone recommend a desktop screencast recorder for ubuntu? The ones I have been looking at seem to be unsupported and very old
[19:50] <jrib> mzawieska: what's wrong with lm-sensors?
[19:51] <jooiiee> mickster04,  llutz  I get "Bad: new and old password are too similar
[19:51] <jooiiee> " but they are not, not at all. but i am trying to change to a password i have used before, is there a cashe file that i can remove?
[19:51] <tizbac> Wipster: xvidcap
[19:52] <Wipster> tizbac, yeh I was looking at that one, but there havn't been any updates in 6 years :(
[19:52] <Wipster> *4 years
[19:52] <llutz> jooiiee: sorry idk
[19:52] <jooiiee> :(
[19:54] <deserteagle> could someone please help me figure out why the hell grub won't work? :( i've been at it for 3 days now
[19:54] <mzawieska> jrib
[19:55] <mzawieska> when i type the sensors it tells me
[19:55] <deserteagle> i installed ubuntu on a fresh new hard drive from a liveCD, and it STILL won't boot
[19:55] <llutz> jooiiee: check /etc/security/opasswd
[19:55] <mzawieska> Adapter : Virtual devide
[19:55] <mzawieska> temp1 +62.5 C crit = 126
[19:55] <mzawieska> but shouldnt be showing to me about my CPU and GPU temperature?
[19:56] <jooiiee> llutz, wont let me. how do you open it in gedit with root?
[19:56] <jessi> hpla
[19:56] <jessi> hola
[19:56] <Pici> !gksudo | jooiiee
[19:57] <lukey> Hi folks, I went to print out a document this morning and cupsd tells me "libcupsmime.so.1: cannot open shared object file: No such file or directory" however "ldconfig -v | grep libcupsmime" tells me "libcupsmime.so.1 -> libcupsmime.so.1"... I'm a little confused :\
[19:57] <llutz> jooiiee: i doubt its a plaintext file
[19:57] <xfact> Hello, I ma about to sign Ubuntu code of conduct in Launchpad, and I have created a encrypted UbuntuCodeofConduct-1.1.txt.asc, but when I am tying to open it then it saying "There is no application installed for PGP/MIME-encrypted message header files" what kind of application it needs for opening?
[19:57] <jooiiee> llutz, it wont open in anny way, try it on local
[19:57] <pabelanger> Anybody know if ubuntu cross-compiling powerpc packages or is host machine running powerpc?
[19:57] <xfact> Please help
[19:58] <jooiiee> llutz, on your yow machine... what was i thinking.. local? hmm.. my bad
[19:58] <ZykoticK9> xfact, it's just a text file - open it with gedit or any other text editor
[19:58] <odyi> Anyone having issues with firefox on lucid beta?  It won't start after the initial startup when the profile is created.
[19:58] <Pici> odyi : Please join #ubuntu+1 for Lucid/10.04 support/discussion.
[19:59] <xfact> ZykoticK9, oops! I am feeling foolish, lol, thank you :)
[19:59] <jrib> mzawieska: please don't use enter as punctuation.  Did you read ubottu's link?
[20:00] <deserteagle> when in grub's rescue prompt, ls only shows (hd0) rather than (hd0,1) etc. why is this? i used ubuntu's liveCD default install (used the whole hdd)
[20:01] <xfact> Do anyone thinks that signing one PGP key at Launchpad is enough?
[20:01] <jooiiee> llutz, its just blank.
[20:02] <llutz> jooiiee: then again: sorry idk
[20:06] <barkerfan809> So, my mouse and keyboard is locking up on me now with vista, I believe its either karma, pc tools, or the fact that i uninstalled some framework or something, they were old updates and thought that my pc would run fine without them. Is ther a channel you guys recommend for pc repair?
[20:07] <mickster04> barkerfan809: when u say they are locking up on you..?
[20:07] <barkerfan809> Yes, much like a virus would prevent login
[20:07] <barkerfan809> Something, I am unsure of it
[20:07] <kenpark> barkerfan809: when you say vista what do you mean? :-)
[20:08] <ZykoticK9> barkerfan809, ##windows for vista support
[20:08] <newbie> anybody knows how to make videos for youtube with only text and pictures?
[20:08] <mikolaj> hello
[20:08] <Trek> !ot | newbie
[20:08] <barkerfan809> um.. do i need to put two #??
[20:08] <Trek> yes barkerfan809
[20:08] <barkerfan809> Thanks
[20:09] <barkerfan809> Have a nice day everyone..
[20:09] <newbie> barkerfan809: bye
[20:09] <barkerfan809> I may stay for now, but will be non responsive, also.. why so many info popping up?
[20:10] <barkerfan809> join..quit...join...quit
[20:10] <newbie> barkerfan809: yeah
[20:10] <mickster04> barkerfan809: barkerfan809 popul;ar channel
[20:10] <barkerfan809> Is there a way to hide it
[20:10] <mickster04> lol
[20:10] <mickster04> yeah
[20:10] <mickster04> yeahi cant remember now
[20:10] <barkerfan809> oh popular..
[20:10] <FloodBot2> mickster04: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[20:10] <mickster04> tsk
[20:10] <lelito> saluti
[20:10] <kenpark> barkerfan809, newbie: configure your irc client correctly.
[20:10] <lelito> !list
[20:10] <ProjectXSorrow> DONT FLOOD SON
[20:11] <FireSide> barkerfan809: what client you using?
[20:11] <mickster04> son i am disappoint
[20:11] <barkerfan809> Im using droid...
[20:11] <Myrtti> !offtopic
[20:11] <ZummiG777> Question: Stupid question but is Red Hat Cluster Suite expected to be supported in 10.04 LTS?
[20:11] <barkerfan809> andchat, motorola droid, I do not have too many options unless i input text to change things?
[20:12] <mickster04> barkerfan809: its a client thing...
[20:12] <mickster04> so if your client wont let u change the appropriate settings...
[20:12] <newbie> @all do you guys see our clients system messages?
[20:12] <mzawieska> okay my GPU is 70 C and my CPU is 44 C I have nVidia 9700 graphic card on my laptop
[20:12] <barkerfan809> Yeah.. like the join  quit stuff?
[20:13] <Trek> mzawieska, that's perfectly decent
[20:13] <data> hi. I tried upgrading to the lucid beta. But now I get the error message: "E: Could not perform immediate configuration on already unpacked 'initramfs-tools'.Please see man 5 apt.conf under APT::Immediate-Configure for details."
[20:13] <barkerfan809> Is ssl a type of encryption?
[20:13] <nim62> sdf
[20:13] <nim62> sd
[20:13] <nim62> asd
[20:13] <nim62> asd
[20:13] <FloodBot2> nim62: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[20:13] <ZykoticK9> data ask in #ubuntu+1
[20:13] <barkerfan809> lol nim
[20:13] <barkerfan809> Okay bye then
[20:13] <nim62> where r u?
[20:13] <data> ZykoticK9: thanks
[20:14] <nim62> mbruuuuuttzzzz
[20:14] <mickster04> nim62: scroll down mayb?
[20:14] <newbie> I need a easy to use sofware to make a video for youtube
[20:14] <nim62> what r u doing all???
[20:14] <newbie> onle text and pictures
[20:14] <Myrtti> !offtopic | nim62
[20:14] <mickster04> newbie: check out !omg!ubuntu, they have articles on things like that
[20:15] <nim62> like thiss
[20:15] <Trek> nim62: this isn't a chat room, its a tech support channel;
[20:15]  * FireSide is remebering why he hates KDE
[20:15] <newbie> MOM AFK 5min
[20:15] <xcerca> !topic
[20:15] <nim62> ada yang bisa bahasa indonesia?
[20:15] <Myrtti> !id | nim62
[20:16] <nim62> PUSING BANYAK TUGAS eeuuuuuuyyyy.....
[20:16] <Myrtti> nim62: behave or you will be removed
[20:16] <martini1992> if this is a support channel it should be named #ubuntu-support
[20:16] <CalmvsKhaos> i agree
[20:16] <nim62> oke, thanks
[20:16] <mickster04> martini1992: what would be the point of #ubuntu then?
[20:17] <nim62> caooo
[20:17] <KB1JWQ> !id | nim62
[20:17] <KB1JWQ> Doh, Myrtti beat me to it.
[20:17] <martini1992> a general ubuntu conversation channel
[20:17] <deserteagle> help, grub won't load at ALL even after a clean and formatted liveCD install
[20:17] <Myrtti> martini1992: that's #ubuntu-offtopic for you.
[20:17] <erUSUL> martini1992: /j #ubuntu-offtopic
[20:17] <mickster04> martini1992: we have offtopic for that
[20:17] <erUSUL> deserteagle: any meaningfull error message?
[20:18] <erUSUL> !details | deserteagle
[20:18] <martini1992> hang on can i have a full list of the ubuntu channels
[20:18] <nim62> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[20:18] <SuspectZero> rawr i think i keep getting lagged out.
[20:18] <deserteagle> erUSUL, out of index was the last one
[20:18] <deserteagle> erUSUL, let me check what it is now
[20:18] <Myrtti> !irc > martini1992
[20:18] <Digit0> hello
[20:18] <mickster04> hi
[20:19] <martini1992> !irc
[20:19] <SuspectZero> in anycase what i asked before was i have the ath9k driver running and i keep getting an error saying "unable to reset channel". i currently have 9.10 fully updated installed. can someone please help me get this sorted out
[20:19] <deserteagle> erUSUL, it's now "error: invalid extent"
[20:19] <deserteagle> erUSUL, idk how many times i've reformated and done a clean install. This one's actually a brand new harddrive since I thought the other one was old or something
[20:20] <newbie> I need a easy to use sofware to make a video for youtube
[20:20] <newbie> only text and pictures
[20:20] <deserteagle> erUSUL, the interesting bit, is that when in grub rescue, i ls: it only shows one (hd0) (as if it had no partitions)
[20:21] <erUSUL> deserteagle: is this a flash drive or a normal hard disk ?
[20:21] <brontosaurusrex> newbie: check the packages in ubuntu studio
[20:21] <deserteagle> erUSUL, normal
[20:22] <erUSUL> deserteagle: my googling comes empty
[20:22] <deserteagle> lol, hence why i'm here :p
[20:22] <erUSUL> deserteagle: only this https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/430333 but no solutions are offered there (quick read)
[20:22] <brontosaurusrex> newbie: https://wiki.ubuntu.com/UbuntuStudio/PackageList
[20:23] <vak> hi all
[20:23] <ActionParsnip> Yo yo yo
[20:23] <vak> i am quite frustraited
[20:24] <brontosaurusrex> newbie: but really, the only decent video editor i saw on linux was probably autodesk smoke*, and even that runs on redhat only i belive ...
[20:24] <vak> 64bit linux can't copy with usual command 80K files: cp dir1/* dir2
[20:24] <vak> yeah, I know about "solution": http://www.linuxjournal.com/article/6060
[20:24] <vak> "solutionS"
[20:24] <vak> but it is a shame...
[20:25] <ActionParsnip> Vak: log a bug
[20:25] <vak> ActionParsnip: is it a bug? I
[20:26] <Coded1> I have some environment variables I need to export on boot what file do I put them in?  /etc/bashrc ?
[20:27] <erUSUL> vak: no it is not a bug. but you can not honstly expect that linux 80.000*(averagenamelenght) bytes of command line
[20:27] <jdog_> exit
[20:27] <ActionParsnip> Vak: if something doesn't work as expected then log a bug, it will be addressed or closed as a non-bug
[20:27] <ActionParsnip> Vak: plus, its free
[20:27] <erUSUL> vak: no it is not a bug. but you can not honstly expect that linux handles 80.000*(averagenamelenght) bytes of command line
[20:29] <brontosaurusrex> erUSUL: a bug in way the mv command is implemented?
[20:30] <brontosaurusrex> maybe
[20:30] <erUSUL> vak: use tar (cd dir1 && tar cvf - . ) | ( cd dir2 && tar xvf - )
[20:30] <vak> erUSUL: I do expect that "cp" should be able to expand '*' in smarter way, without shell's work on it...
[20:30] <jhamlin> Hi folks.  I'm trying to pick out a laptop and am wondering if I should go with 32 or 64 bit.  Are there disadvantages to 64 bit if I'm only going to run linux (+ vbox/xp)?
[20:30] <erUSUL> vak: it is the shell the one that expands * not cp
[20:30] <vak> erUSUL: yep, thanks :)
[20:31] <vak> "it is the shell the one that expands * not cp" --> I know.
[20:31] <fresita> k ta?¿?¿?
[20:31] <brontosaurusrex> jhamlin: 64 should be the advantage, afaik vbox works just fine
[20:31] <fresita> k ablais en ingles??¿¿?¿
[20:31] <ActionParsnip> Jhamlin: if you do lots of encoding of music and video use 64bit
[20:32] <ActionParsnip> Jhamlin: if it has more than 3gb ram use 64bit
[20:32] <erUSUL> vak: or pax !es | freite
[20:32] <erUSUL> !es | freite
[20:32] <erUSUL> vak: sorry
[20:32] <ActionParsnip> Jhamlin: otherwise use 32bit and you'll be fine
[20:32] <Bisu[Shield]> hey guys, I want to install sftp and allow users to send over credit card #s and stuff to me but I am afraid that they may have too much access to my box, someone mentioned that I create the users and chroot to the user directory, I am unfamiliar with it so can someone fill me in, are my concerns valid and will users be able to access my whole server/
[20:32] <gacrux> jhamlin: i run vbox with 64bit, works fine
[20:32] <erUSUL> freite: sorry too; bad tab completion
[20:32] <vak> pax? ok, thx gonna look at it
[20:32] <jhamlin> Are there still issues with some drivers and software not having been yet ported to 64 bit?
[20:33] <mickster04> ActionParsnip: doesnt ubuntu 32 still see more than 3 gig ram anyway?
[20:33]  * deanus has 64bit and no problems
[20:33] <martini1992> jhamlin: 32bit programs run on 64bit machines in 32bit mode
[20:33] <ActionParsnip> Jhamlin: drivers will be fine although I've seen crappy lexmark drivers in 32bit only
[20:34] <ActionParsnip> Mickster04: if you use the PAE kernel it can access 12gb
[20:35] <erUSUL> vak: no need tar will do. with pax is « cd dir1 && pax -rw . /path/to/dir2 » (according to docs)
[20:35] <Coded1> mickster04, Ubuntu will handle 4GB+ ram in 32bit mode but the difference is each process only has access to 3GB so one program will only be able to access 3GB and another will be able to access another 3GB but one cannot access 6GB
[20:35] <ActionParsnip> Mickster04: the generic will only see 3.2gb
[20:35] <mezquitale> can you mount an iso in virtualbox??  I have a cd iso that I want to access in windows7 guest OS
[20:35] <leagris> Sorry Jaimie Lexmark has shown crappy producted, crippled product that claim empty cartridge way before it is empty. Avoid Lexmark as plague
[20:35] <numberGrey> can I pipe a command into the command "gnome-terminal", ideally I would like to create a command where it would launch a new terminal and then vim
[20:35] <erUSUL> mezquitale: #vbox ?
[20:36] <numberGrey> inside the terminal
[20:36] <mezquitale> erUSUL, thank you very much for your contribution!
[20:36] <jhamlin> thanks folks
[20:36] <erUSUL> numberGrey: launch « gnome-terminal -e 'vim' »
[20:36] <Bisu[Shield]> am i invisible?
[20:36] <mickster04> numberGrey: you mean bla > text.txt?
[20:36] <mickster04> Bisu[Shield]: definatly not here
[20:36] <Trek> no Bisu[Shield]
[20:36] <erUSUL> Bisu[Shield]: no just translucid
[20:36] <numberGrey> erUSUL: ok cool, i didnt see the -e option on help
[20:37] <vak> erUSUL: thanks!
[20:37] <IntuitiveNipple> Jaunty > Karmic do-release-upgrade failed with a package 404 download error. Trying to restart do-release-upgrade now generates a "Segmentation Fault". Any ideas where to go from here?
[20:37] <numberGrey> erUSUL: thank you very much, that helped me a bunch!!
[20:38] <Bisu[Shield]> so no help?
[20:38] <Bisu[Shield]> c'mon linux people SFTP is common
[20:38] <ActionParsnip> !patience | Bisu[Shield]
[20:38] <guntbert> mezquitale: seriously - ask in #vbox
[20:38] <mickster04> Bisu[Shield]: you have ssh set up?
[20:39] <erUSUL> Bisu[Shield]: sftp is common your use case not so
[20:39] <Alexeyka> hi everybody
[20:39] <mknarr> hello
[20:39] <deserteagle> hi hi
[20:40] <mickster04> Bisu[Shield]: why dont you just call each other, do part there, part over email part over msn?
[20:40] <Alexeyka> somebody know why there is no request password for anonymous?
[20:40] <Bisu[Shield]> yes i have ssh installed
[20:40] <mickster04> Bisu[Shield]: handing out credit card details is dangerous however you do it
[20:41] <guntbert> Alexeyka: where is no password?
[20:41] <Alexeyka> when i login as anonymous
[20:41] <mickster04> well think about it, why would u want anon to have a password?
[20:41] <Crash1hd> How can I get ubuntu to create files with a chmod of 775 instead of 755?
[20:41] <leagris> Alexeyka, what's the point of a password for an anonymous connexion ?
[20:41] <erUSUL> Crash1hd: change your default umask
[20:42] <Crash1hd> erUSUL: ok I will google that :)
[20:43] <Alexeyka> when somebody login my vsftpd where must be blank password as i think
[20:43] <eyore15> newbie: the newest issue of Ubuntu User's Magazine features an article on video editors
[20:44] <andybiker> How can I modify and check the bootloader file? The menu doesn't work properly for other filesystems
[20:45] <kop> can I get the live  dist to ignore the splash screen and display the txt load w/o editing the local machine's grub ?
[20:45] <Crash1hd> Im also having issues with keyboard control through vnc in ubuntu?
[20:45] <Tecna> I'd like to output video to the TV-out of my ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev 41) as well as my nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2), but I can't find the controls to do this.  I just installed the ATI TV-out package.
[20:45] <kop> Crash1hd, use both hands :D
[20:46] <skreem> I am using PulseAudio on Ubuntu 9.10 and today I have no sound and this message is in /var/log/messages : lock-autospawn.c: Cannot access autospawn lock.
[20:46] <Crash1hd> kop: lol
[20:47] <eyore15> newbie:  , Avidemux, ffmpeg, blender (known for 3D animation, it also does video editing), Kdenlive, kino, LIVES, OpenMovieEditor, PiTiTi
[20:47] <Alexeyka> ooh, this channel is not vsftpd support?
[20:47] <kop> Crash1hd, if I can't help I can mk u laugh anyway
[20:47] <Guest2657> Hi, I tried 10.04 beta, the live cd doesnt seem to support these kernel options: fetch=http://serverip/filesystem.squashfs , boot=live  and toram will they be implemented or are they left out on purpose?
[20:47] <Crash1hd> kop: well someone has to lol
[20:47] <NewGuyver> hi guys Need Help making IPPLAN use LDAP to auth ?
[20:47] <guntbert> Alexeyka: this channel is for ubuntu support
[20:48] <guntbert> !lucid | Guest2657
[20:48] <Crash1hd> erUSUL: ok it says to change the umask in /etc/profile (but all I have is /etc/profile.d)?
[20:48] <Tecna> andybiker: alt+F2 and type gksu gedit /boot/grub/grub.cfg
 sorry))))
[20:49] <eyore15> newbie: cineierraCV, OpenShot.  The article list more depending on what you are trying to do.
[20:49] <DaveLu> can someone private msg me to help me with conky
[20:49] <Tecna> andybiker: do NOT alter your grub configuration unless you know what you're doing.
[20:49] <guntbert> Alexeyka: but there is #vsftpd
[20:50] <kop> Guest2657, I'llsat Lucy ain't stable :D Your issues with boot=live I'm assuming are from disc ? mine from usb ..
[20:50] <guntbert> DaveLu: please keep your questions/answers in the channel
[20:50] <Tecna> andybiker: I suggest getting some guidance from #grub before saving any changes if you're inexperienced.
[20:51] <DaveLu> ok, will do... when I enter conky in terminal it comes up, but says it is the default one
[20:51] <andybiker> Tecna, I have a very ggod idea, I want to compare the ubuntu file with the mandriva file, but ubuntu uses grub 2 (shit) and overrides mandriva's grub1
[20:51] <kop> andybiker, even if you are experienced with grub it has changed in 9.10 so beware and rtfm
[20:51] <andybiker> so I can't use Mandriva to bootload and start ubuntu
[20:51] <KB1JWQ> What's the Ubuntu Way(tm) to see the changelog on a new package?
[20:52] <DaveLu> and I'd like to delete this conky file to use another
 it is good! do you know why anonymous user has no password request?
[20:52] <Guest2657> kop I boot the kernel and initramfs from usb-stick (with burg) and send the commands to the kernel to fetch the live image from a server, works great with xbmc 9.11 but not with 10.04 so I wonder if it is because of 10.04 or some changes the xbmc guys made
[20:52] <guntbert> Alexeyka: sorry - no
[20:52] <mezquitale> andybiker, so why dont you configure grub2 to boot up mandriva?  grub2 cant boot up mandriva???
[20:52] <kop> andybiker, I'm sure you can it's just going to be a bit of reading
 ))))
[20:53] <IntuitiveNipple> KB1JWQ: less /usr/share/doc/${PACKAGE_NAME}/changelog.Debian.gz
[20:53] <KB1JWQ> IntuitiveNipple: Thank you sir or perhaps ma'am.
[20:53] <mezquitale> andybiker, it wont be a lot of reading, you can ask people here if youre having problem booting up ubuntu and mandriva using grub2 or you can ask in #grub , you might be lucky enough to bump into a developer that can point you in the right direction
[20:54] <guntbert> Guest2657: why don't you discuss that in #ubuntu+1 ?
[20:54] <kop> Guest2657, I'm gonna guess not xbmc at this point (with no way to test) because I can't get the "live" usb stick to load and run
[20:54] <DaveLu> here's the actual msg I get in terminal   no readable personal or system-wide config file found, using builtin default
[20:54] <DaveLu> Conky: desktop window (1c000a7) is subwindow of root window (6e)
[20:54] <DaveLu> Conky: window type - desktop
[20:54] <DaveLu> Conky: drawing to created window (0x4c00001)
[20:54] <DaveLu> Conky: drawing to single buffer
[20:54] <FloodBot2> DaveLu: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[20:54] <Peikko1> could somebody help me with how to find a wlan connection? the last time i used ubuntu i just clicked on the symbol on the upper right and saw every possible connection but with 9.10 it seems more diffecult
[20:55] <Trek> !info git
[20:55] <andybiker> Ubuntu think an /opt partition is bootable!
[20:55] <dimitra> hello guys, there is a room for C here?
[20:56] <KB1JWQ> IntuitiveNipple: s/less/zless/ for future reference.
[20:56] <kop> dimitra, c and c#
[20:56] <KB1JWQ> dimitra: ##c
[20:56] <dimitra> thanx guys
[20:57] <StaRetji> Hello folks. Is it possible to upgrade kernel on LiveCD system (installed on USB with permanent storage file)? I have to upgrade intel gpu drivers and need new kernel for it. THX ;)
[20:57] <Crash1hd> is there a way to set the umask to 775 or rwxrwxr-x? I can get using 002 gives me rw-rw-r-- but there is no x?
[20:57] <IntuitiveNipple> KB1JWQ: I use /bin/less (/usr/bin/less)
[20:57] <alindgr1> Peikko1: I get a list of wireless networks just by left clicking on the icon.
[20:57] <dimitra> I join #C but says that I cannot send to channel, why?
[20:58] <Peikko1> alindgr1: i don't
[20:58] <guntbert> !register | dimitra
[20:58] <DaveLu> ok floodbot2, I did as told
[20:58] <KB1JWQ> IntuitiveNipple: Hmm, doesn't interpret the compression correctly here.  less -V here shows version 436, what're you on?
[20:58] <alindgr1> Is yours enabled?
[20:58] <dimitra> ok thanx
[20:58] <guntbert> dimitra: you may need to register/identify
[20:58] <Faratl> .
[20:58] <leagris> dimitra, check if it says something about requiering a registered nick to acess the chan
[20:58] <dimitra> got it, thanx
[20:58] <IntuitiveNipple> KB1JWQ: 429 on Karmic
[20:58] <Faratl> aye gunbert
[20:59] <KB1JWQ> IntuitiveNipple: Odd, maybe it's a regression?
[20:59] <Peikko1> it should be. atleast the wlan led is on. how else do i enable it with ubuntu?
[20:59] <guntbert> !hi | Faratl
[20:59] <Faratl> hello
[20:59] <mylfu> help http://wklej.org/id/302764/
[20:59] <IntuitiveNipple> KB1JWQ: As long as you can find the changelogs its all good
[20:59] <alindgr1> Peikko1: if you right click on it, you should get a different drop-down with wired and wireless lan
[21:00] <guntbert> !here | mylfu
[21:00] <Tecna> I'd like to output video to the TV-out of my ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev 41) as well as my nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2), but I can't find the controls to do this.  I just installed the ATI TV-out package.
[21:00] <dany__> hi all
[21:00] <dany__> I have a problem, I'm on ubuntu and if I watch a video on youtube there is no sound
[21:01] <alindgr1> If one does not have a check box, it is disabled
[21:01] <dany__> both firefox both chrome
[21:01] <Anvoid> i'm not sure why wine won't let me install diablo from cd. i also tried .iso image file but no luck. when i run setup.exe or install.exe from wine, all i get is a loading icon then nothing happens. any idea?
[21:01] <Peikko1> with right click i only get: "netwark activ, connectioninformation and edit connection
[21:01] <andybiker> The menu is an absolute mess but I can't save t!
[21:01] <Tecna> Anvoid: Check your drive configurations
[21:02] <Uboss> Hello advanced users of technology :-)
[21:02] <Peikko1> left click only wired conneciton
[21:02] <ProjectXSorrow> Hello to you too
[21:02] <mknarr> whats up uboss?
[21:02] <Uboss> am fine dude u?
[21:02] <alindgr1> Peikko1: have you had to download drivers for your wireless card?  How long has it not been working?
[21:02] <Peikko1> could it be that it ubuntu doesn't recognize my wlan card?
[21:02] <mknarr> pretty good
[21:02] <Uboss> :)
[21:02] <mknarr> :D
[21:02] <ProjectXSorrow> who wants to make a distro with me
[21:03] <alindgr1> Peikko1: did you just install 9.10?
[21:03] <Peikko1> no. didn't download any driver. the last time it worked was with a different notebook too
[21:03] <Paulo39> hi, i wonder if its possible to save my mostly used themes of chromium to reuse when i want. like the extensions. the fact is that i have to go to the web page of the theme whenever i want to use it
[21:03] <Peikko1> jey
[21:03] <Peikko1> yes
[21:03] <polter> so.. my UbuntuOne client doesn't start.. it won't sync and some of the options are greyed out.. anyone got any ideas?
[21:03] <Uboss> Peikko1, try to put the ethernet cable on your computer to do all the updates and after that you will have the drivers.
[21:03] <Peikko1> uboss: I did.
[21:03] <Tecna> Anvoid: Make sure that the location at which your cd is mounted is listed as a cd rom drive in wine's configuration
[21:03] <Peikko1> thats how i'm online now
[21:03] <Uboss> Peikko1, nothing yet?
[21:03] <Peikko1> no
[21:03] <Faratl> any modding tipz
[21:03] <mylfu> http://paste.ubuntu.com/400180/
[21:03] <brontosaurusrex> ProjectXSorrow: what kind?
[21:03] <ChogyDan> polter: I had to switch dropbox.  Im quite happy with it
[21:03] <Uboss> Peikko1, you are online with the ethernet cable now?
[21:04] <Peikko1> yes
[21:04] <polter> ChogyDan, sure dropbox is a nice solution but I want to use the music store too
[21:04] <Faratl> how to u donwload windows apps on ubuntu
[21:04] <ProjectXSorrow> brontosaurusrex:not really sure i have a complied kernal but dont know where to go from there i want to be orginal you know
[21:04] <mknarr> wine
[21:04] <mknarr> faratl: use wine
[21:04] <Uboss> Peikko1, I don't know mate. I did as I told you and my drivers found.
[21:04] <Faratl> is  wine the only program
[21:05] <polter> Faratl, you could use something like PlayOnLinux
[21:05] <mknarr> faratel: there are a few other programs but they cost
[21:05] <Peikko1> "Atheros 802.11 b/g/n" how can I find drivers for that?
[21:05] <ProjectXSorrow> brontosaurusrex:a part of me wants to stay text another gui
[21:05] <Tecna> polter: Isn't that just a front-end to wine?
[21:05] <Faratl> does playonlinux cost
[21:05] <Uboss> Peikko1, let me check.
[21:05] <alindgr1> Peikko1: click on system, go down to administration, then click on Hardware Drivers, let it work, then see what it tells you.
[21:05] <polter> Tecna, well, you can do things like use different versions of wine depending on the application
[21:05] <DaveLu> what is proper way for me to get help with a conky problem
[21:05] <Uboss> Peikko1, alindgrl is right. Check that first.
[21:06] <polter> it also downloads and installs known dependencies if I'm not mistaking
[21:06] <polter> but hey, how do I get my Ubuntu One to work, anyone?
[21:06] <Peikko1> alindgr1: it only shows my ati card
[21:06] <mknarr> DaveLu: ask here or post on the ubuntu forums
[21:06] <Tecna> Faratl: playonlinux is in the repository.  search for it with synaptic.
[21:06] <Anvoid> Tecna: ah, i got it. so that's the problem. many thanks... now, for d2. i hope ladder reset is still fresh!
[21:06] <Faratl> ok
[21:06] <Tecna> Anvoid: You're welcome
[21:06] <DaveLu> I did ask here, and no one answered
[21:07] <mknarr> D2 LOD FTW
[21:07] <Bageshwar> i want to create a local mirror on my lan, from the packages  i have on the cd .. anybody ???
[21:07] <guntbert> DaveLu: try to give as much info as possible - all in one line - though its possible that noone knows an answer
[21:07] <Uboss> Peikko1, take a look here http://georgia.ubuntuforums.org/showthread.php?p=8941863
[21:07] <Peikko1> ok
[21:07] <data> hi, i tried an upgrade, but i got: "E: Could not perform immediate configuration on already unpacked 'initramfs-tools'.Please see man 5 apt.conf under APT::Immediate-Configure for details."
[21:07] <alindgr1> Peikko1:  I would go to Ubuntuforums.org if I were you.  There are a million experts there, and I am sure someone has figured it out.  You can also go to linuxwireless.com.
[21:08] <DaveLu> I'm trying to replace my default conky file
[21:08] <Bageshwar> i want to create a local mirror on my lan, from the packages  i have on the cd .. anybody ???
[21:08] <Bageshwar> !mirror
[21:08] <polter> heck I'll just reinstall Lucid in a couple of days, that'll probably do it
[21:08] <alindgr1> DaveLu.:  Do you have a replacement for the default?
[21:08] <Tecna> DaveLu: If no one answered, then odds are, no one here are the moment has the timre nor know-how to help.  wait a while and ask again later.  Meawhile, ask in other relevant places, and try googling the error to see if there are solutions online
[21:08] <Peikko1> alindgr1 ok, thank you
[21:08] <Bageshwar> !local mirror
[21:09] <alindgr1> Peikko1: sorry I could not help more.
[21:09] <DaveLu> yes I do, I d/l it from the forum
[21:09] <Peikko1> no problem
[21:09] <Uboss> Peikko1, check the url I gave you, someone solved the same problem with you.
[21:09] <guntbert> !aptoncd | Bageshwar does that help?
[21:09] <Peikko1> uboss, reading it right now
[21:09] <AbortD> how do i repair broken packages
[21:10] <DaveLu> ok, tks, will do
[21:10] <alindgr1> when you start conky run this command: conky -c ~/pathtoreplacementconky/conkyrc
[21:11] <mknarr> AbortD: try Go to System > Administration > Synaptic Package Manager and click Edit > Fix Broken Packages. or sudo apt-get -f install
[21:11] <Tecna> mknarr: beat me to it. :)
[21:11] <marlun_> Anyone who is using an apple bluetooth keyboard with ubuntu and who knows how to get the fn key working? It's not working at all for me. If I start xev and hit it i doesn't genereate an event. Any ideas?
[21:11] <mknarr> tecna how do i whisper back ?
[21:11] <AbortD> mknarr, thx
[21:12] <Bageshwar> !offline
[21:12] <Tecna> mknarr: what do you mean by "whisper back"?
[21:13] <mknarr> i mean like  EX:   /tell tecna ...
[21:13] <guntbert> !pm | mknarr
[21:13] <mknarr> !pm | tecna :D
[21:14] <ProjectXSorrow> so anybody?
[21:14] <Tecna> lol
[21:14] <brontosaurusrex> mknarr: /notice nick or /msg nick
[21:14] <guntbert> ProjectXSorrow: what was the question?
[21:15] <ProjectXSorrow> creating a distro from ubuntu
[21:15] <Tecna> Does anyone here know anything about using multiple displays in ubuntu?
[21:15] <alindgr111> Whats up projectx
[21:15] <guntbert> !ot | ProjectXSorrow
[21:15] <pablo_Spawn> Hi All
[21:15] <ProjectXSorrow> no really guntbert
[21:15] <ProjectXSorrow> i program this stuff
[21:16] <ProjectXSorrow> i want to create my own
[21:16] <pablo_Spawn> Anybody Knows the correct procedure to add the Canon LBP3200 Printer to Ubuntu 9.10  ???
[21:16] <mentok> is 10 ready yet?
[21:16] <ProjectXSorrow> and doing myself takes to long
[21:16] <mentok> browser isn't cooperating.
[21:16] <xangua> !lucid
[21:16] <guntbert> ProjectXSorrow: really - this channel is for ubuntu support - not for merely ubuntu related chatter
[21:16] <mentok> THank you.
[21:16] <data> hi, i tried an upgrade, but i got: "E: Could not perform immediate configuration on already unpacked 'initramfs-tools'.Please see man 5 apt.conf under APT::Immediate-Configure for details." The error only shows the .po files when googling... :/ And the manpage and changing the setting does not help
[21:16] <ceauke>  /join #ubuntu-testing
[21:16] <Tecna> !mods ProjectXSorrow
[21:17] <ProjectXSorrow> no i know its for ubuntu support i come here to help im asking on this channel only because the people who help on this channel are really smart
[21:17] <dany__> this audio problem there wasn't with ubuntu 32bit.. does anyone have ubuntu 64 bit with sound on youtube videos with chrome?
[21:17] <Tecna> wait, maybe that doesn't work in this channel
[21:17] <Uboss> anyone knows how to free up space? :)
[21:17] <skreem> I am using PulseAudio on Ubuntu 9.10 and today I have no sound and this message is in /var/log/messages : lock-autospawn.c: Cannot access autospawn lock.
[21:17] <Uboss> unuseful space
[21:17] <Tecna> Uboss: delete files
[21:17] <ProjectXSorrow> Uboss:disk janitor
[21:18] <skreem> Uboss: "cd /; find . -type f -size +50000k"
[21:18] <skreem> will list all files over 50mb in size
[21:18] <guntbert> ProjectXSorrow: but it is off topic for *this* channel
[21:18] <brontosaurusrex> skreem: yeah, with sudo infront
[21:18] <Uboss> Tecna ProjectXSorrow skreem, I knew a command in Terminal for that job but I forgot it :S
[21:18] <Faratl> how do i install samsung drivers
[21:18] <Peikko1> uboss didn't work. it's still not showing any available connections
[21:18] <mknarr> Hey guys i have a secondary hdd and i want it to auto mount every time i login to my computer , how is this done ?
[21:18] <skreem> I managed to get it working by sudo -s; su; pulseaudio -vvvvvvv
[21:19] <dany__> no one has it?
[21:19] <Tecna> Uboss: Seriously though, look through your package manger for stuff you're sure you don't need, and uninstall it.  this should also improve overall performance as well.
[21:19] <arakthor> mknarr, I usually edit /etc/mtab (add a new line for it)
[21:19] <Faratl> How can i make ubuntu run faster
[21:19] <Uboss> Tecna, thanks but I mean to clean up unnecessary files.. As on Windows
[21:20] <Trek> Faratl, upgrade your system?
[21:20] <bug2000> http://laqueum.co.cc/pastebin/?show=d5c8e67de - Any ideas?
[21:20] <Faratl> no
[21:20] <Faratl> should i
[21:21] <numberGrey> when I try the command "gnome-terminal -e 'python main.py' the window opens and closes immediately, anyone know why that would happen?
[21:21] <Tecna> Faratl: uninstall unnecessary packages, particularly support for hardware which you do not have/use.
[21:21] <ceauke> hi guys. how can I remove kernels? I have about 4 on my distro and just want the latest
[21:21] <Faratl> ok
[21:22] <guntbert> arakthor: mknarr: its /etc/fstab not /etc/mtab to edit
[21:22] <arakthor> guntbert, oh right
[21:22] <arakthor> guntbert, my bad
[21:22] <Tecna> Faratl: for example, I uninstalled anything related to bluetooth, because i donot have any bluetooth radio.
[21:22] <hdon> i accidentally caught some content in my terminal that breaks it so that the reset command doesn't work, but the menu bar's reset function fixes it
[21:22] <Bhior> boa noite
[21:22] <numberGrey> nevermind
[21:22] <guntbert> arakthor: the joys of the channel - you have always someone looking over your shoulder :-)
[21:23] <ardchoille> How do we remove a bash alias?
[21:23] <ardchoille> unalias blah isn't working
[21:23] <quesoesbueno59> whos excited for 10.4?
[21:23] <dosordie> I have a problem
[21:23] <Trek> ardchoille: check the permissions first, then check .bashrc or .bash_aliases
[21:23] <dany__> anybody with these audio problems with flash on ubuntu 64 bit?
[21:23] <Trek> !lucid | quesoesbueno59
[21:23] <Faratl> So should i use the sofware center to uninstall or packaged
[21:23] <ardchoille> Trek: there's not a way to remove an alias via the command line?
[21:23] <alex__c2022> hi, is there an easy way to zip up multiple files using their original file names? ie) i have foo1 foo2 ... foo99 and I want to get foo1.tar.gz foo2.tar.gz ... foo99.tar.gz
[21:24] <Tecna> Faratl: I reccomend Synaptic
[21:24] <Trek> ardchoille: not if its not letting you
[21:24] <ardchoille> Trek: been using Ubuntu for 4 years, I have r/w perms on ~/.bash_aliases. alias and unalias are supposed to work
[21:24] <jul_> Hi there
[21:25] <jul_> I need some help installing the matest ATI driver
[21:25] <jul_> latest
[21:25] <jul_> anyone up for it ?
[21:25] <Tecna> jul_ Which ATI Driver are you installing?
[21:26] <dosordie> suddenly moves the cursor to the middle when I close window or open
[21:26] <dosordie> vad är felet?
[21:26] <dosordie>  	
[21:26] <jul_> the lates one on ATI's page
[21:26] <jul_> 10-2
[21:26] <numberGrey> what is the proper way to pipe code into and interpreter but leave the interpreter open?
[21:26] <jul_> 64 bit
[21:26] <jul_> I've done everythin as stated on https://help.ubuntu.com/community/BinaryDriverHowto/ATI/
[21:26] <ukebane> Ok, I purged gdm and reinstalled it and I'm still stuck with that xubuntu login screen
[21:26] <ukebane> how do I get rid of it?
[21:27] <jul_> but when I build the pakcges it ends with an error
[21:27] <jul_> https://help.ubuntu.com/community/BinaryDriverHowto/ATI/
[21:27] <guntbert> !enter | jul_
[21:27] <jul_> ok... Anyway, bulding the pakckages ends with an error dpkg-shlibdeps: warning: diversions involved - output may be incorrect
[21:27] <jul_>  diversion by xorg-driver-fglrx from: /usr/lib/libGL.so.1.2
[21:28] <jul_> 10 lines like this
[21:28] <CR0W> if i can install something using apt-get isntall, can I instead download it as a .deb file?
[21:28] <jul_> I can copy the whols thing if you want
[21:28] <Tecna> jul_: That would be the "non-free" mdriver then.  I'm not sure,, but it a reasonably current driver sshould be available through System > Administration > Hardware Drivers.  If you're not satisfied with that, I'm not the one to help, since I have little experience with ATI
[21:28] <CR0W> to use it in another computer without internet.
[21:28] <guntbert> !pastebin | jul_
[21:29] <jul_> Taks Ubot
[21:29] <trism> CR0W: aptitude download package_name; will download it to the current directory
[21:29] <jul_> yes I've installed the ubuntu proprietary driver, but i's not the latest
[21:29] <jul_> there's a new one on ATI's wesite
[21:29] <trism> CR0W: it won't get the deps though
[21:29] <Losha> alex__c2022: you have control over what the tar.gz files are named e.g. tar -cvz foo1 > foo1.tar.gz but it's a weird thing to do to use tar for a single file, the whole point of tar is it handles sets of files. Are you sure you don't just want to use gzip on the whole directory to compress each file individually?
[21:30] <CR0W> trism thx
[21:30] <guntbert> CR0W: look into /var/cache/apt/archives/  -- most debs are there
[21:30] <alex__c2022> well the files are pretty big
[21:30] <alex__c2022> 200mb text files
[21:30] <alex__c2022> i could put them all in one archive i guess
[21:31] <alex__c2022> i just don't want to have to name them one by one since there are alot of them
[21:31] <Tecna> I'd like to output video to the TV-out of my ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev 41) as well as my nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2), but I can't find the controls to do this.  I just installed the ATI TV-out package.
[21:32] <alex__c2022> are .tar.gz and .tgz the same thing?
[21:32] <alex__c2022> same format
[21:32] <said> how can i make youtube run faster and better on ubuntu
[21:32] <guntbert> alex__c2022: yes
[21:32] <alex__c2022> thanks
[21:32] <ukebane> Sorry for repeating my question, but does anyone know how I can get the default login screen back?
[21:33] <Losha> alex__c2022: step back a moment and tell us exactly what you want to do, in case there's a better solution. So far I know you have a lot of 200mb text files, and you want to do what? Back them up somewhere? Copy them to a different machine. Just have them take less space? What?
[21:33] <HexGhost> hello! im having a problem with timezones on ubuntu 9.04 and wondering if anyone is good with them
[21:34] <numberGrey> if I were to write echo "print 'hello'" | python, how could I have the interpreter stay open after the input?
[21:34] <Losha> alex__c2022: .tar.gz and .tgz are the same thing. They don't mean anything in themselves, they're just a naming convention people follow so they know by looking what kind of format the files are in...
[21:34] <Tecna> !ot
[21:34] <FarATL> is there a way to make youtube run smoother
[21:35] <alex__c2022> Losha: yes, I need to scp them to a different server. I guess im just going to batch the files. ie) put foo1 ... foo10 in one archive and foo11 to foo20 into another, etc
[21:35] <KB1JWQ> Welcome to #ubuntu,    FarATL. Try the latest flash from Adobe's site, the beta is better performing.
[21:35] <alex__c2022> im going to delete the originals
[21:35] <alex__c2022> because im running out of space
[21:36] <HexGhost> let me rephrase my question in hopes of better explaining...there is a bug in ubuntu 9.04 with detecting default timezone
[21:36] <sereal> can anyone recommend me a RSS reader? I'm using liferea and it's crashing fairly frequently.
[21:36] <yomrj> hi guys
[21:36] <HexGhost> which is causing the java jdk to report an incorrect timezone, which means my java programs are off
[21:36] <yomrj> i have a maybe stupid question that bugs me
[21:37] <Wicet> HexGhost, I doubt there would be one
[21:37] <HexGhost> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=416452
[21:37] <HexGhost> its currently filed with debian
[21:37] <HexGhost> not sure if its been filed with whoever does bugs for ubuntu
[21:37] <Losha> alex__c2022: you can just scp -r the entire directory to another machine and they'll get copied. The -C flag will compress them for transmission and expand them again on the other side (trading cpu time off for faster transmission speeds) transparently. No need to mess with tar at all. Will that satisfy?
[21:37] <yomrj> i want to execute some keyboard sequence (lets sey CTRL-F4) but i want do do it from terminal rather than from an actual keyboard - HOW to do that ?
[21:37] <HexGhost> they mention a workaround at the end but don't give a lot of info on what it is
[21:38] <HexGhost> so im looking for a 'translation' :)
[21:38] <bdheeman> how sad http://www.fewt.com/2010/03/bye-ubuntu-it-could-have-been-fun-but.html
[21:38] <yomrj> anyone ?
[21:38] <alex__c2022> Losha: cool, I didn't know scp supported that option. Is there a way for scp to not uncompress ? and keep the files compress on the machine they are transferred to?
[21:39] <guntbert> !ot | bdheeman
[21:40] <HexGhost> wicet: did you manage to read that link? im not up on debian/ubuntu much
[21:40] <bdheeman> that's even more sad it such things are off topic here
[21:40] <HexGhost> i tried cat /etc/localtime but its not a text file
[21:41] <Wicet> HexGhost, I was referring to the identifying of timezone - not familiar with JDK
[21:42] <HexGhost> ah
[21:42] <Losha> alex__c2022: no, to do that, you should compress the files in place on the source before scp'ing them (and when you scp, *don't* use -C, since trying to compress already compressed files is a waste of time and ends up giving worse performance). Use something like 'gzip .' to compress all files in the directory. This will keep the names and just replace e.g foo with foo.gz. Try it by hand on a few files first to see how much compression
[21:42] <Losha> you get...
[21:43] <HexGhost> as i said im not up on how linux does timezones
[21:43] <HexGhost> apparently /etc/localtime tells the system which timezone to use?
[21:43] <alex__c2022> Losha: thanks
[21:43] <HexGhost> which is currently showing the wrong timezone i guess
[21:44] <bastidrazor> bdheeman: this is the support channel.. not run your mouth about design issues.. that would be #ubuntu-offtopic to air your issues
[21:44] <Bageshwar> !approx-import
[21:44] <Bageshwar> !approx_import
[21:44] <Losha> bdheeman: all distros 'jump the shark' eventually it seems. And they all have their share of sneering, condescending users. If you need to see what that's like when it gets bad, just watch #openbsd for a while...
[21:44] <ukebane> Problem solved, turns out I still had xsplash installed somewhere
[21:44] <Losha> Yeah, I know. Off-topic...
[21:44] <Bageshwar> !approx
[21:45] <newbie> ciao
[21:46] <Bageshwar> !apt-proxy
[21:46] <newbie> !list
[21:46] <mikebeecham1195> How often does ubuntu get a new release?
[21:46] <ukebane> If I'm not mistaken every 6 months
[21:46] <bdheeman> I'm not an Ubuntu guy nor I know the blogger in anyway, but it hearts me if someone complains about and, or leaves a nice community
[21:47] <Jef91> Is there "bigmem" precompiled kernel in the ubuntu repos like debian has?
[21:47] <bdheeman> s/hearts/hurts/
[21:47] <Bageshwar> !bot
[21:47] <merlin2049er> hey, what do you guys recommend converting video into dvds
[21:47] <bastidrazor> merlin2049er: devede
[21:47] <merlin2049er> will devede make dvd menus
[21:47] <Jef91> merlin2049 devede + brasero/your favorite burning program (nero is good)
[21:47] <Jef91> merlin2049er Yes
[21:47] <merlin2049er> ok i'll try it out
[21:47] <Bageshwar> !apt-mirror
[21:48] <merlin2049er> does handbrake do dvd menus
[21:48] <Jef91> merlin2049er handbrake is ripping from dvds no?
[21:48] <merlin2049er> oh ok
[21:49] <mickster04> Jef91: yeah....
[21:49] <newbie> ciao
[21:49] <MarcusM> can a local ip only be from a range of 192.168.1.1 to 192.168.1.255
[21:49] <newbie> !list
[21:49] <mickster04> merlin2049er: not really i dont think,
[21:49] <Jef91> Thats what I thought mickster04 :)
[21:49] <mickster04> merlin2049er: you probably want dvddecrypter
[21:50] <zongo> hey guys, Empathy cannot connect anymore because I am not using gnome network manager anymore but wvdial (I know but I have too since I am using a usb 3G modem)
[21:51] <skreem> dvd::rip is a good program for ripping
[21:51] <Jef91> zongo What version of network manager/what 3g modem?
[21:51] <zongo> anyone could tell me how can I make empathy connects through wvdial ?
[21:51] <ishipapiter> does anyone know how do set up xorg to get 1:1 pixel mapping?
[21:51] <ukebane> MarcusM, that depends on your subnet
[21:51] <Jef91> zongo Try pidgin yet? Empathy blows
[21:51] <armstr13> How do you get flash to work?
[21:51] <Losha> bdheeman: I have decided I will be part of the solution, not the problem. No distro is perfect. If that means sitting here, directing hundreds of people to the one line fix that moves the title bar back where it came from, so be it. I refuse, for example, to start my own distro (like having 300 different distros has ever helped). Too bad FEWT doesn't have the stomach for it...
[21:52] <zongo> no I have not but I think I will
[21:52] <deanus> cant have 255 anyways...
[21:52] <johannes_> hi I am looking for the file that stores informations about the fetch= boot options in /usr/share/initramfs-tools/scripts/ which one is it? or is it somewhere else?
[21:52] <Jef91> armstr13 http://tinyurl.com/ydqlh2b
[21:52] <armstr13> how do you get flash player to work?
[21:53] <mickster04> armstr13: sudo apt-get install ubuntu-restricted-extras
[21:53] <ukebane> 10.0.0.0, 172.16.0.0 and 192.168.0.0 are generally reserved for private networks MarcusM
[21:53] <raffaele> trying to convert wav to mp3, using "lame myfile.wav" I get "warning: unsopported format"
[21:53] <MarcusM> ukebane: Okay, thanks (:
[21:53] <raffaele> which package may I install??
[21:53] <KB1JWQ> Welcome to #ubuntu, ukebane. RFC 1918 stipulates that those are /8, /12, and /16 respectively.
[21:53] <bdheeman> Losha: you are right, but ask him and even yourself is it easy to leave a community you loved, worked and, or grown upon?
[21:55] <ishipapiter> does anyone know how do set up xorg to get 1:1 pixel mapping through hdmi?
[21:55] <bdheeman> Losha: IMHO, it is easy to lose developers and, or contributors
[21:55] <Losha> raffaele: your args aren't quite right. Try something like: lame --preset cd myfile.wav myfile.mp3
[21:55] <bdheeman> ishipapiter: X -dpi XX
[21:56] <raffaele> Losha: let me try..
[21:56] <ishipapiter> bdheeman: how would i use that?
[21:57] <Losha> bdheeman: apparently easier to leave than to stay and fight? I've left companies (and people I liked) for similar reasons. There's always a megalomaniac somewhere. Sometimes I think nothing gets done without them....
[21:57] <bdheeman> ishipapiter: that depends on which DM you use KDM, GDM and, or XDM
[21:57] <raffaele> Losha: doesn't work either.. -e emp must be n/5/c not set
[21:57] <tamran> howdy all
[21:58] <merlin2049er> hey i'm trying to add a source to update handbrake
[21:58] <merlin2049er> but I don't get why I don't get the update?
[21:58]  * deanus is going to leave because shuttleworth painted his shed the wrong colour
[21:58] <merlin2049er> https://launchpad.net/~handbrake-ubuntu/+archive/ppa
[21:58] <merlin2049er> i added the 2 sources
[21:58] <merlin2049er> now what?
[21:59] <ishipapiter> bdheeman: this is actually on xbmc. im trying to connect it to my tv. i get serious overscan with hdmi tho.
[21:59] <brontosaurusrex> merlin2049er: karmic?
[21:59] <Losha> bdheeman: I've been looking for a Ubuntu replacement for some time, in case the quality dropped unacceptibly. I thought debian was it for a moment, till it turns out they'd removed the driver for my audio card because 'the license lacked the proper copyright'. I keep coming back to Ubuntu. It's not perfect, just less of a mess than the others...
[21:59] <merlin2049er> ya 9.10
[21:59] <Losha> raffaele: exact text of the error message, please...
[22:00] <raffaele> Losha: lame: -e emp must be n/5/c not set
[22:00] <bdheeman> ishipapiter: I never ever used xmbc, but all you need to find and edit is which script starts your X session
[22:01] <tamran> question: a friend has two different VM boxes on the network and they both seem to handle key inputs in the same way. Both are Ubuntu boxes and one is 64bit with en-us and the other is 32bit with en-ca (this one has the desired actions).  What he was trying to get work was using the num-keypad (with numlock turned OFF) as arrow keys: N,NE,E,SE,S ... etc.  Does anyone have any idea of how and where such things get mapped?  He's using SSH t
[22:01] <raffaele> Losha anyway I tried installing audacity, and it says it can't import wav!!! But I can listen to it with totem!!! What the hell is going on???
[22:01] <Lavin> none of my bit torrent apps work does anyone know why?
[22:01] <mickster04> !details | Lavin
[22:03] <Lavin> ok sorry
[22:04] <johannes_> there are no "live" scripts in /usr/share/initramfs-tools/scripts/ but casper, how can I add live scripts?
[22:04] <sebastian_> PL??
[22:04] <mickster04> Lavin: have you tried turning it off an on again is the kind of answer you'll get for that question
[22:04] <Lavin> ubuntu 9.10 2.6.31, tranmission bit torrent or vuze (any), when i open a torrent file to start downloading from seeds nothing happens at all it shows connected to seeds but it doesn't start to download
[22:04] <bigtom21485> what is the best mp3 player to sync with ubuntu?
[22:05] <EdgEy> Does anyone know how I can get Firefox to search for terms I put in the address bar?
[22:05] <mickster04> Lavin: i presume u are using that box to connect to irc?
[22:05] <ishipapiter> bdheeman: yes i know which file im supposed to edit. it's my xorg.conf file. i've been messing around with it for some time, using modlines and other stuff. i haven't tried what you told me tho.
[22:05] <Lavin> yes
[22:05] <denis_> hi! my v4l2 webcam is working (in mplayer tv://) but skype shows only black screen, though they say it supports v4l2. What direction should i follow to solve this problem?
[22:05] <andre__> alguém do brasil pra me dar uma ajuda aí?
[22:05] <mickster04> Lavin: mayb there are no seeds?
[22:05] <EdgEy> Using win32 Firefox I get a google search if I type in "whatever" for example, on Ubuntu it just goes to a page "whatever cannot be found"
[22:05] <ukebane> EdgEy, http://johnbokma.com/firefox/keymarks-explained.html
[22:06] <cube_> Hi ubi fan's!
[22:06] <andre__> alguém do brasil pra me dar uma ajuda aí?
[22:06] <cube_> I love ubuntu xd
[22:06] <EdgEy> ukebane, thanks but, I know about that
[22:06] <mickster04> EdgEy: connection and proxy setting rght?
[22:06] <Lavin> yes it says seeds and it works under windows as seeds, also searching with vuze it never finds anything just keeps searching blank screen
[22:06] <EdgEy> mickster04, yeah everything works fine, websites, actual search bar, etc
[22:07] <chyzy> ivo
[22:07] <EdgEy> It's just one word queries that go to a "cannot be found" error
[22:07] <bdheeman> ishipapiter: rename it, and let the xorg generate or use it defaults; though need HAL (hald) running
[22:07] <EdgEy> Two or more work fine
[22:07] <Snofroe> Does anybody know a program that will play dvd images without the disc?  i've tried to get cdemu but cannot find it
[22:07] <Zer> Could you perhaps make a loopback device?
[22:07] <bdheeman> Snofroe: smplayer
[22:08] <mickster04> EdgEy: if u use a proxy one word searches get looked for in the proxy, like at uni i have a proxy .hull.ac.uk, so one word searches get put to the proxy (eg whatever.hull.ac.uk) which wont work
[22:08] <mickster04> Snofroe: mount it?
[22:08] <headkorn1812> Hi, I just installed 9.10, dual booting with Windows 7 on a Toshiba L505D-G6000. Whenever I boot into Ubuntu, I get to tty1 and have to startx to get to the GUI and my mouse and keyboard does not work. What can I do to fix this?
[22:08] <ukebane> andre__, #ubuntu-br
[22:08] <mknarr> snofroe: Im not sure if daemontools lite supports linux but u can check that out it mounts the dvd.iso and then u can play it it ne player
[22:09] <Snofroe> thanks
[22:09] <mickster04> headkorn1812: it should auto go to tty7 (i think)
[22:09] <bdheeman> Snofroe:  or symlink the folder which contains DVD dump to /dev/dvd
[22:09] <headkorn1812> mickster04, it goes straight to tty1
[22:09] <mickster04> Lavin: i have no idea
[22:09] <Snofroe> im just trying to rip images and store them on the hd so i dont have to drag them out
[22:09] <cube_> I'm Magyar basszátokmeg
[22:09] <ishipapiter> bdheeman: yeah my xorg file is at defaults right now.
[22:10] <mickster04> headkorn1812:; someone else may be able to get that working, i dunno how to as i've nver had that problem
[22:10] <rokumanxes> Hey there.  I'm going to be making the full switch to ubuntu once 10.04 is released, and I had some questions...
[22:10] <headkorn1812> Thanks for trying mickster04
[22:10] <bdheeman> ishipapiter: is now it working as expected
[22:10] <ishipapiter> no
[22:10] <denis_> anybody? pleas
[22:10] <brontosaurusrex> !ask rokumanxes
[22:11] <ishipapiter> bdheeman: i get overscan. lots of it.
[22:11] <andre__> what is the install directory??? I'm suposed to copy a binary file there...
[22:11] <deanus> mickster04, in hull?  good lad
[22:11] <ubuntu_> hello
[22:12] <rokumanxes> I've got an acer laptop with AMD64 dual core, and I know there's 32 bit, and 64 bit versions.  Is the best option to get 64 bit or does it have any drawbacks?
[22:12] <bdheeman> ishipapiter: look at your /var/log/Xorg.0.log
[22:12] <WebDawg> rokumanxes go with 64bit
[22:12] <Slart> rokumanxes: I would go with 64bit
[22:12] <mickster04> deanus: yes:D
[22:13] <Lavin> mickster04: ok  i keep looking
[22:13] <Slart> rokumanxes: there used to be some software that wasn't available in 64bit.. but that is much better now
[22:13] <WebDawg> 64bit will rock yeh too.
[22:13] <WebDawg> like the future and all that
[22:14] <mickster04> EdgEy: hows it looking?
[22:14] <brontosaurusrex> WebDawg: the future will be the box that wont make annoying noises imho
[22:14] <rokumanxes> Hah.  Well I've only ever been using 32 bit due to the fact some things were incompatible, or a hassle and such.
[22:14] <mickster04> rokumanxes: yeah i think theres even a 64bit flash:D
[22:14] <mickster04> altho that could be a "will be"
[22:15] <mknarr> im currently running 64 bit and have no issues at all
[22:15] <deanus> 64bit flash works fine (for me)
[22:15] <mknarr> ubuntu 9.10
[22:15] <chris__> flash works 64bit
[22:15] <rokumanxes> I'm running 8.04 32 bit now, and honestly it feels a bit sluggish...  =/
[22:15] <deanus> just watched a 1080 youtube vid fullscreen lastnight..
[22:15] <mickster04> rokumanxes: well mayb wait for 10.04?
[22:15] <chris__> but installation in more difficult then at 32bit
[22:15] <deanus> dont know what all the whining is about...
[22:15] <mickster04> rokumanxes: oh you said you would:D
[22:16] <mknarr> the only thing is there is a bug  that when u have compiz fusion installed it causes flash player (the controls) to not always work
[22:16] <ishipapiter> bdheeman: ok i'm looking at it
[22:16] <mknarr> but im pretty sure it is for both 32 and 64 bit o/s's
[22:16] <brontosaurusrex> deanus: how did you install?
[22:16] <chris__> jap
[22:16] <michele__> !list
[22:16] <deanus> brontosaurusrex, the lazy sods way.. a ppa
[22:16] <rokumanxes> Yeah.  The only drawback now is lack of ipod touch syncing.  But now that 10.04 is implementing it...  I don't see much need to keep windows.
[22:16] <brontosaurusrex> deanus: ok, ty
[22:17] <deanus> brontosaurusrex, https://launchpad.net/~sevenmachines/+archive/flash
[22:17] <joshuah> hi, I'm trying to get gtk going on osx so I can compile programs like geany and have them work nice/face with the correct hotkeys.  I'm following this guide: http://sourceforge.net/apps/trac/gtk-osx/wiki/Build#Prerequisites .  the sh script ran fine, but I don't have anything in ~/.local/bin at all.  what am I doing wrong?  I've asked in #gtk as well
[22:17] <raffaele> Losha: thanks to soundconverter I finally managed to get mp3 from wav
[22:17] <mknarr> Hey, ne one use cairo-dock ? if you dont i really recommend you check it out
[22:18] <raffaele> but I can't figure out the problem :S anyway thanks
[22:18] <brontosaurusrex> mknarr: better than docky2?
[22:21] <ePax> im getting this error while trying to reinstall gnome-do. E: gnome-do: subprocess installed post-installation script returned error exit status 2
[22:22] <mknarr> ePax try purging gnome-do and do a reinstall then
[22:22] <tonsofpcs> i know there''s a way with the bot, but I forget how....
[22:22] <tonsofpcs> what version of the package 'ike' is in karmic?
[22:22] <mickster04> !ike
[22:22] <bastidrazor> !info ike
[22:22] <tonsofpcs> thanks :(
[22:23] <tonsofpcs> [2.1.5-2 is required for a certain feature, I guess I'm building 2.1.6b4]
[22:23] <armence> Hey all, is there an equation solver for ubuntu?
[22:23] <Diverdude> any svn users in here?
[22:24] <tonsofpcs> armence: there's quite a few
[22:24] <stoneman> !info freiOr-plugins
[22:24] <ePax> mknarr: same thing again i tryed sudo apt-get remove --purge gnome-do
[22:24] <tamran> how does Ubuntu do keybindings?
[22:24] <tonsofpcs> armence: try macsyma
[22:24] <armence> thanks
[22:24] <tonsofpcs> armence: to see tthe others, search apt/synaptic for "computer algebra system"
[22:25] <Losha> raffaele: weird. But running lame --longhelp does show there is a -e flag (though it says it's obsolete). Humour it,
[22:25] <mark___> hi guys. ive been trying to get this website to work its a radio and streams in browser but i cant get it to work on ubuntu
[22:25] <digii> anyone tryed gnome-shell? what is the grafic-card requirements for it? is a nvidia 8400 128mb enough?
[22:25] <ramiro> how do allow an user to use sudo (throught the cli)?
[22:25] <mark___> www.lbc.co.uk
[22:25] <digii> to make it work good
[22:26] <Diverdude> mmm i am trying to use    svn add filename,            but that gives me error message:          can't open file .svn/entries: no such file or directory   anybody has any suggestions?
[22:26] <mickster04> digii: i get FULL compiz effects on an asus 900
[22:26] <mickster04> digii: integrated intel graphics:D
[22:26] <armence> tonsofpcs, thanks
[22:26] <mickster04> digii: oh waot
[22:27] <mickster04> gnome shell sorry
[22:27] <fuzzybunny69y> hey everyone how do you change the permissions of a directory and all the files and subdirectories?
[22:27] <digii> hehe yea =D the new gnome, thinking about trying it
[22:28] <brontosaurusrex> fuzzybunny69y: chmod -R ? (i do know this is not recommended thought)
[22:28] <Ather> Un saludo a tod@s
[22:28] <digii> but i dont think gnome-shell should be any harder for the grafic then compiz
[22:28] <ardchoille> !es | Ather
[22:28] <fuzzybunny69y> brontosaurusrex, is it chmod -R 777 <directory name>
[22:28] <tschand> server
[22:28] <Ather> gracias
[22:29] <tschand> #server
[22:29] <stoneman> i had this problem: when i started any program (Example: Rhythmbox , Movie player... or even Ubuntu  Software Center...) all of this programs were terminated... Solution was to remove... freior - plugins! Is this reported as a bug?
[22:29] <stoneman> sorry for bad Englisg
[22:29] <stoneman> *h
[22:29] <stoneman> xD
[22:30] <fuzzybunny69y> brontosaurusrex, nm i got it ;)
[22:30] <fuzzybunny69y> it didn't fix the problem oh well
[22:31] <mickster04> digii: i think what u have there will be ample
[22:33] <grkblood13> does anyone know how to go about setting up multiple phone lines on a pc?
[22:33] <ori> Hey I have a problem: My google chrome keeps freezing for no reason. The toolbars work, but the pages wont move. Any ideas?
[22:33] <Diverdude> how do i see hidden files and folders?
[22:33] <xangua> Diverdude: in nautilus: Control+H
[22:34] <SuspectZero> quick question, is there anyway i can get internet from my wlan0 to eth0 which has another laptop plugged into it
[22:34] <xangua> ori: use chromium instead, is open source
[22:34] <airtonix> !ics | SuspectZero
[22:34] <ori> xangua, my mistake it is chomium. At least it says it is
[22:34] <SuspectZero> xangua, ty <3
[22:35] <xangua> ori: then try the beta, not the daily build version
[22:35] <ori> xangua, where do i get that?
[22:35] <xangua> https://launchpad.net/~chromium-daily/+archive/beta
[22:36] <EdgEy> mickster04, don't think I'm using a proxy
[22:36] <EdgEy> No idea why it's doing this, works fine under windows
[22:36] <airtonix> SuspectZero, apparently nm-applet has internet connection sharing properties.
[22:36] <Diverdude> xangua, and in the terminal?
[22:37] <xangua> Diverdude: barely use terminal, sorry :(
[22:37] <airtonix> Diverdude, ls -a
[22:38] <deanus> EdgEy,  afair, its some setting, probably in about:config somewhere..
[22:39] <EdgEy> hahaha I like the new alert
[22:39] <stoneman> is there any replacment for compiz???
[22:39] <EdgEy> This might void your warranty! :O
[22:39] <airtonix> stoneman, for what purpose ?
[22:41] <slickrick> hi.  i am running myth 0.22 on multiple boxes and finding the frontend ui to be very slow compared to 0.21.  media library -> watch recordings is extremely slow.
[22:41] <KenBW2> is there a non-PulseAudio system-wide equiliser?
[22:41] <KenBW2> is there a non-PulseAudio system-wide equiliser?
[22:42] <airtonix> !repeat | KenBW2
[22:42] <stoneman> notnothing in particular just ask
[22:42] <KenBW2> airtonix: sorry, thought i wasnt in the channel when i'd sent it
[22:42] <Bageshwar> what can be done about this : GPG error http://some.server karmic Release: The following signatures couldn't be verified because the public key is not available : NO_PUBKEY <16 digit hex>
[22:43] <Bageshwar> this comes when i v use apt-proxy
[22:43] <airtonix> stoneman, because people who use openbox and want compositing use xcompmgr, and gnome users use the metacity compositing feature.
[22:43] <alex5454> Can someone help me?  I'm running Xubuntu 9.10 and can't get Compiz Fusion to work :(
[22:43] <airtonix> alex2423, installed your video drivers ?
[22:43] <CyberaX2195> anyone know a way of finding out when a private ubuntu mirror was last updated?
[22:44] <alex5454> How would I got about doing that.  I'm sorry, but I'm completely new to LInux
[22:44] <mknarr> alex go to system administration hardware drivers
[22:44] <Bageshwar> alex5454: did you try apt-get install <package>
[22:45] <marsje> Friends, how do I fix this error message related to locales once and for all? http://pastebin.org/121398
[22:46] <alex5454> i have compiz downloaded and installed, its just not working.  Im activating my video driver now though
[22:46] <mknarr> that is probably your problem Alex 5454
[22:46] <mark___> how can i install some windows audio format codecs for ubuntu
[22:47] <mark___> i cant seem to stream this radio station even if i use the url direct in mplayer and the others
[22:47] <Mage__> mark___, you need to install them from the medibuntu repository
[22:47] <mark___> add that as a source yea ?
[22:48] <mknarr> Alex5454 after your vid drivers are installed do this   System>Preference>Appearance and make sure you have under Visiual Effects set to extra
[22:48] <alex5454> Thanks for the help!  It is so nice to a Linux newbie like myself to have a nice helpful community
[22:49] <mknarr> :D
[22:49] <mknarr> r they working now ?
[22:49] <Mage__> mark___, yes, if you just need mp3 though you can install the gstreamer plugin from the universe repository
[22:49] <LetsGo67> My laptop, Acer Aspire 5315, overheats!  It shuts down by itself, and the fan won't turn on.  Can someone help, please?
[22:49] <djkrikke> Hi guys, when I try to install ubuntu, I can't see my /dev/sda disk
[22:49] <djkrikke> only sdb and sdc
[22:49] <djkrikke> the sda disk is a ntfs partitioned drive
[22:49] <nytek_> LetsGo67: open it up and clean the fan
[22:49] <alex5454> I have to restart my computer to activate the video driver.  BRB
[22:49] <KenBW2> is there a way around the fact that pulseaudio equalizer makes sound crackly after the slightest adjustment?
[22:49] <mknarr> kk
[22:50] <nytek_> djkrikke: it probably changed it to sdb something
[22:50] <LetsGo67> nytek_: after it shuts down, the fan runs all the time… for only the following boot.
[22:50] <djkrikke> nytek_: No, gparted sees 3 HDD's
[22:50] <djkrikke> and the installer only 2
[22:50] <nytek_> djkrikke: run a df /dev/sdb with whatever the number is
[22:51] <nytek_> djkrikke: then you can mount it via terminal
[22:51] <djkrikke> why do I have to mount it?
[22:51] <djkrikke> I just want to install on it
[22:51] <nytek_> LetsGo67: after it shuts down? wouldnt it be off then?
[22:51] <nytek_> lol
[22:51] <Mage__> djkrikke, in order to install, it must be mounted first so it can be accessed
[22:51] <nytek_> djkrikke: what do you want to install on it? im sorry i miss the first part of the question
[22:51] <djkrikke> just ubuntu
[22:51] <djkrikke> there was fedora core on it
[22:51] <djkrikke> removed that part
[22:51] <LetsGo67> nytek_ It shuts down, I turn it on, the fan runs all the time for the boot.
[22:52] <djkrikke> now there's still a 250GB NTFS partition with w7 on it
[22:52] <nytek_> djkrikke: are you trying to dual boot?
[22:52] <djkrikke> yes
[22:52] <djkrikke> and all my drives are visible except that one
[22:52] <_linux_student> ubuntu 9.10  amsn 0.98.1 cam is ok but no voice is ringing but it does not affect the neighbors. I can one please help
[22:52] <nytek_> djkrikke: well, boot from the cd, mount the drive and then install ubuntu on it
[22:53] <djkrikke> ok
[22:53] <djkrikke> mount it in /media or something?
[22:53] <Mage__> djkrikke, you should be able to mount it automatically from the places menu
[22:53] <nytek_> djkrikke: the ubuntu installer should have it mounted already
[22:53] <djkrikke> nytek_: that's exactly what is going wrong
[22:53] <djkrikke> it doesnt!
[22:54] <nytek_> djkrikke: im not too sure where you should mount it.
[22:54] <tm0> Whats the Ubuntu discussion channel?
[22:54] <nytek_> djkrikke: i suppose it wouldnt matter, because grub will be installed on it so it will now which partition to boot off of
[22:54] <nytek_> djkrikke: try it, see what happens
[22:54] <djkrikke> I can't see the whole drive
[22:55] <djkrikke> I need /dev/sda
[22:55] <grizzly_> could someoen help me to repair windows 7 boot?
[22:55] <djkrikke> but I only see the b and c
[22:55] <KB1JWQ> !dualboot
[22:55] <KB1JWQ> grizzly_: ^^
[22:55] <grizzly_> i know
[22:55] <grizzly_> but i deleted win 7 boot files
[22:55] <Losha> tm0: support for Ubuntu is here, chat is in #ubuntu-offtopic. Do you have a question?
[22:55] <grizzly_> they are on 100 mb partition by default
[22:55] <grizzly_> and i forgot to copy them
[22:56] <djkrikke> ok I gotta go, sleep is more important than these stupid problems
[22:56] <KB1JWQ> Welcome to #ubuntu, grizzly_.  You sound hosed.
[22:56] <noob_> how can I make a video for youtube on linux without a camera
[22:56] <Mage__> grizzly_, you should be able to use the windows 7 installation disc to repair it
[22:56] <snayth> Hi Someone know of a Terminal shell I can run that will reset the "Panel Properties" or toolbar to default settings ? ?
[22:56] <tamran> does anyone know how to modify the numeric keypad button behavior?
[22:56] <grizzly_> well, thing is my dvd rom wont behave :)
[22:56] <Mage__> grizzly_,  well if you have an iso of it you could install it to a thumb drive and boot off of that
[22:57] <grizzly_> can i fix it by manually copying files to win7 root partition and adding that partition to grub
[22:57] <tm0> Losha, no i just couldn't remember the channel, and google is being slow for me atm :/
[22:57] <grizzly_> i also dont have thumb drive :D
[22:57] <nytek_> grizzly_: use your win7 cd to repair the startup
[22:57] <grizzly_> cant
[22:57] <grizzly_> dvd rom wont behave
[22:57] <markl_> grizzly_: or as a coaster for your drinks
[22:57] <jos__> hi, i dont know how to change the usplash ( the ubuntu and loading bar), and i want to use my own pitchure, any body help?
[22:57] <mknarr> alex5454: did it work ?
[22:58] <KB1JWQ> Welcome to #ubuntu, grizzly_.  You sound really hosed.
[22:58] <nytek_> grizzly_: do you have the iso on you hd?
[22:58] <alex5454> no :(
[22:58] <grizzly_> yes
[22:58] <grizzly_> can i boot iso with grub?
[22:58] <alex5454> any other suggestions?
[22:58] <mknarr> are you sure you have compiz installed correctly
[22:58] <nytek_> grizzly_: do you have a usb drive > than 4 gigs?
[22:58] <grizzly_> no :)
[22:58] <jos__> how do i make my own usplsh and activate it?
[22:59] <nytek_> grizzly_: umm, lol. i believe you are hosed :D
[22:59] <grizzly_> i dont have any usb thumb..
[22:59] <grizzly_> awww
[22:59] <alex5454> I'm pretty sure.  I was even able to go into settings and enable the effects but they dont take place
[22:59] <nytek_> grizzly_: you need to get one lol, they are so cheap
[22:59] <grizzly_> i knwo
[22:59] <grizzly_> wife took it :)
[22:59] <yeason> I'm trying to write a shell script in csh and keep getting an error 'Missing -.' Does anyone know what this means?
[22:59] <nytek_> grizzly_: tell her you need that shit back lol
[22:59] <grizzly_> i know i fixed same thing in vista once
[22:59] <grizzly_> wife is 150 kms away :)
[22:59] <sll> well I installed grub2 and all fine
[22:59] <Losha> grizzly_: try unetbootin? cd-less install from isos....
[23:00] <jos__> how do i make my own usplash and activate it?
[23:00] <grizzly_> Mage__, tnx
[23:00] <nytek_> grizzly_: its unfortunate that i live in the us and we dont use that notation for distance
[23:00] <nytek_> lol
[23:00] <mknarr> alex5454: do you have your appearance set to extra?
[23:00] <grizzly_> its about 95 miles
[23:00] <grizzly_> i think :)
[23:00] <alex5454> Lol.  And how do I do that?
[23:00] <nytek_> Losha: i dont think you can use it with windows isos
[23:00] <nytek_> iso's
[23:01] <mknarr> 1mile = roughly 2-5 km i think
[23:01] <jos__> can anybody help me?
[23:01] <mknarr> 1mile = roughly 2-3 km i think***
[23:01] <Losha> nytek_: oh, I came in in the middle, didn't I?
[23:01] <nytek_> Losha: no, lol. ive tried unetbootin with windows iso's, it doesnt work. :(
[23:02] <grizzly_> so unetbootin wont work for win...
[23:02] <ganjaman420> What the hell, I was just online with my wireless working perfectly, and then all of a sudden it said that my wireless wasn't enabled and now if I try "sudo ifconfig wlan0 up" I get "SIOCSIFFLAGS: Unknown error 132" - it's as if my wireless card has just been raped... :<
[23:02] <grizzly_> does someone have win7 installed?
[23:02] <nytek_> grizzly_: i have it installed on my other machine
[23:02] <KB1JWQ> !language | ganjaman420
[23:02] <ganjaman420> soz
[23:02] <Losha> jos__: found this on google: https://help.ubuntu.com/community/USplash
[23:03] <jos__> o, i wil try it, thanks
[23:03] <jos__> ok*
[23:03] <ganjaman420> ... wait, I didn't swear
[23:03] <grizzly_> Mage__, could you upload boot files somewhere?
[23:03] <nytek_> ganjaman420: try to connect to the wifi network again, using iwconfig
[23:03] <Mage__> grizzly_, i don't have windows 7 just vista, xp and a bunch of linux distros
[23:03] <KB1JWQ> grizzly_: ##windows awaits.
[23:04] <grizzly_> yeah
[23:04] <grizzly_> i will try there :)
[23:04] <LetsGo67> Thanks, ttyl.
[23:04] <nytek_> grizzly_: just install ubuntu on your hd and use a virtual system for windows apps :D
[23:04] <grizzly_> thing is that i need win for some stuff
[23:05] <grizzly_> CATIA
[23:05] <Mage__> grizzly_, or use wine, it's pretty good now
[23:05] <ganjaman420> well if I try iwlist wlan0 scan it says "wlan0 interface doesn't support scanning : network is down"
[23:05] <Losha> ganjaman420: first thing to try is a full reboot, making sure it powers down fully to reset the hardware...
[23:05] <SuspectZero> !firestarter
[23:05] <ganjaman420> Losha, yeah I've tried that
[23:05] <nytek_> Mage__: is it? i havent use it in quite some time
[23:05] <Mage__> nytek_, i can run wow in direct x mode with better framerate in wine then on my windows hard drive lol
[23:06] <nytek_> Mage__: wow, thats amazing. what about for running office 2007?
[23:06] <Mage__> nytek_, only thing that sucks is they don't have quite enough implemented yet to make gameguard happy so any game relying on that won't work
[23:07] <Again617> I need some help with multiple user accounts
[23:07] <Mage__> nytek_, i haven't tried microsoft office cause i don't have it.  open office does everything i need even if it isn't as pretty interface wise :P
[23:07] <Mage__> Again617, what's the problem?
[23:07] <Again617> I've reinstalled Ubuntu but I've kept the same /home partition
[23:07] <nytek_> Mage__: what wm do you use?
[23:07] <Again617> now, my user worked just fine and I can access all the old files
[23:08] <Again617> but I added a new user (for my girlfriend) as I had before but authentication fails when I try to login
[23:08] <xfact> Hello, Evolution usually blocks picture with mails, how to allow those pictures from mails (Thunderbird etc. gives direct button for allowing)
[23:08] <Mage__> Again617, that's bad?
[23:08] <jos__> Agian617, and yhou dont want that?
[23:08] <hal1> I have a printer installed on a server under cups, and now wish to print to it from an ubuntu client, but am not sure what queue to use.  Does anyone know how I can find out what it is, please?
[23:08] <xfact> ?
[23:08] <patC> i have run rtorrent over an ssh session from a remote computer, now im back at my laptop and i want to resume the rtorrent program. I can see its running by using ps -e. anyone know how?
[23:08] <jos__> you*
[23:08] <Mage__> nytek_, whatever gnome uses lol
[23:08] <hipitihop> I have a
[23:08] <nytek_> Mage__: gnome is the wm :D
[23:08] <hal1> lpstat -v on the server reports   beh:/1/0/60/socket://hp4550n:9100
[23:08] <Mage__> nytek_, i though gnome was the de?
[23:08] <myrl> hi
[23:08] <LinuxGuy2009> Is there any reason that I should not be running 64bit install of Ubuntu rather than the 32bit that I currently use? Flash 10 or the Alpha 64bit needed I read about? Java in the repos available and works? I only have 2 GB ram so I know I wont gain anything there, but i read that OGG encoding is double, and I was wondering if HandBrake DVD encodes with x264 would have that large 50% gain too? Any reason I should not be using 64bit?
[23:09] <Mage__> hal1, if you go to System > Printers you should be able to add it there
[23:09] <look> bey bee
[23:09] <xfact> Hello, Evolution usually blocks picture with mails, how to allow those pictures from mails (Thunderbird etc. gives direct button for allowing) ?
[23:09] <hal1> Mage__: I got that far ;)
[23:09] <Mage__> LinuxGuy2009, there is no reason to use 32 bit if you have a 64 bit processor
[23:09] <myrl> whats better kde or gnome?
[23:09] <Pici> !best | myrl
[23:09] <Mage__> myrl, personal preference
[23:09] <Silver_Swords> hi all. i just bought a new mouse logitech G1. it goes into sleep mode instantly after stopping movement. is there a fix?
[23:09] <Mage__> hal1, what does it tell you?
[23:09] <myrl> ok
[23:09] <nytek_> myrl: imo it depends on your computer specs
[23:09] <coz_> myrl,  well  I prefer gnome but many like kde  it is very much a personal preference
[23:10] <myrl> k
[23:10] <myrl> thanks
[23:10] <hal1> Mage__: it asks me for a printer queue name, but I have no idea what it is.  That is what I need assistance with
[23:10] <nytek_> coz_: xfce ftw
[23:10] <nytek_> coz_: or xmonad :D
[23:10] <coz_> myrl,  kde..at this point may be more of a resource intensice DE  than gnome
[23:10] <esco> hi guys
[23:10] <Mage__> Silver_Swords, i would check the repository.  if you do a search there are logitech specific programs in there
[23:10] <coz_> myrl,  and yes you can use lxde  of xfce as well
[23:10] <myrl> ok
[23:10] <xfact> Fine! That means nobody knows the answer and Evolution sucks !
[23:11] <coz_> myrl,  I meant lxde or xfce as well
[23:11] <Mage__> hal1, is it a network printer you are trying to connect to or one connected to the same computer?
[23:11] <patC> i have run rtorrent over an ssh session from a remote computer, now im back at my laptop and i want to resume the rtorrent program. I can see its running by using ps -e. anyone know how?
[23:11] <esco> i'm new to linux and i have some weird issues
[23:11] <hal1> Mage__: one connected to another printer
[23:11] <zvacet> myrl: and enlightenment too
[23:11] <Silver_Swords> Mage__: thnx.. will check
[23:11] <Mage__> xfact, i don't know evolution so i don't have an answer i'm sorry
[23:11] <myrl> do you know how to make cups start on startup?
[23:11] <esco> with my video card i can't play any 3d games
[23:11] <hal1> Mage__: sorry, one connected to another linux machine
[23:12] <nytek_> brb
[23:12] <esco> and every effects are very slow
[23:12] <esco> could anyone help me to solve this?
[23:12] <Mage__> hal1, ok click Add > Network Printer > Find Network Printer
[23:12] <xfact> Mage__, Never mind, it's usual :)
[23:12] <Mage__> esco, try disabling the effect.  your video card may not be up to it
[23:13] <myrl> is gnome faster than kde?
[23:13] <Mage__> xfact, glad it works :)
[23:13] <MASTERTN> Hello, i need some help form my DVB card
[23:13] <Mage__> myrl, i believe they are about the same if i remember the last benchmarks correctly
[23:13] <myrl> ok
[23:13] <kenpark> myrl: if you need a fast desktop you should check out xubuntu
[23:13] <Diverdude> arrg......i have a folder with content, so i get an error if i try rmdir foldername. How do i ignore that and just delete the folder anyway? i tried --ignore-fail-on-non-empty and nothing happens
[23:14] <myrl> ok
[23:14] <kenpark> Diverdude: rm -rf DIRNAME
[23:14] <Mage__> Diverdude,  rm -rf <folder-name>
[23:14] <Trek> Diverdude: rm -rf dirname
[23:14] <kenpark> haha first
[23:14] <myrl> do you know how to make epson 510 work on ubuntu?
[23:14] <Wiseman> 10.04 won't load for me....
[23:14] <kenpark> Diverdude: be careful it deletes the folder and anything thats inside of it.
[23:14] <Mage__> kenpark, lubuntu is much lighter weight and i run it personally and know that the beta is stable
[23:14] <Pici> Wiseman : Please join #ubuntu+1 for Lucid/10.04 support/discussion.
[23:15] <kenpark> Mage__: hmm lubuntu..never heard of it
[23:15] <Mage__> kenpark, it's built on lxde
[23:16] <Mage__> myrl, if the drivers are available it will work out of the box
[23:16] <MASTERTN> I have TechniSat SkuStar USB 2 and it won't work on ubuntu 9.10 !!
[23:16] <zvacet> kenpark:  see https://wiki.ubuntu.com/Lubuntu
[23:17] <kenpark> merci all :-) interessting stuff
[23:17] <coz_> MASTERTN,  can that be wired directly to the syste instead of usb?
[23:17] <hal1> Mage__: it won't find it.  I have to specify that it is an ipp printer and give the queue.  Do you know how I can find the queue path?
[23:17] <coz_> MASTERTN,  I mean "system"
[23:17] <zvacet> kenpark:  very light I use to run it with 192mb of ram
[23:17] <Mage__> hal1, not sure never had that problem, it may not be supported
[23:17] <MASTERTN> coz_, no only USB
[23:17] <hal1> Mage__: it needs to be in the format ipp://novaHP4550N
[23:17] <Mage__> zvacet, requires 64mb :)
[23:17] <coz_> MASTERTN,  it is not showing up at all?  in browser  192.168.1.1
[23:18] <orbarron> hey all... got a quick ??? I have a 9.10 remix release and I would like to enable touch.. has anyone tried this?
[23:18] <zvacet> Mage__ : I just told my experience with it
[23:18] <coz_> MASTERTN,  you might want to try the ##liinux channel  for this one...I have no experience with usb routers
[23:18] <MASTERTN> coz_, it's an USB DVB card
[23:18] <coz_> MASTERTN,  oh!
[23:19] <Mage__> zvacet, i know.  just saying it in case anyone has a dinosaur and still wants ubuntu lol
[23:19] <coz_> MASTERTN,   this   http://www.technisat.com/index04e9.html?nav=PC_products,en,76-227
[23:19] <Mage__> hal1, i will try to find drivers for you give me a sec
[23:19] <LinuxGuy2009> My Brother MFC-7840W 4in1 printer only has 32bit printer driver, is that going to be unusable in a 32bit install?
[23:19] <zvacet> Mage__ : +1 for that
[23:19] <hal1> Mage__: no, I have the driver thank you
[23:19] <Mage__> oh
[23:19] <hal1> Mage__: I just need the queue path
[23:19] <cpare> hello all, hoping someone can help me get my ubuntu server to boot once again....
[23:19] <hal1> don't worry, I will try to find it
[23:19] <coz_> MASTERTN,  sorry that was not it   do you have link for the device?
[23:20] <MASTERTN> coz_ yes it's it but no linux driver
[23:20] <coz_> MASTERTN,  mm
[23:20] <Mage__> hal1, i have no clue then :(
[23:20] <Uboss> Hello everyone
[23:20] <coz_> MASTERTN,  check with the people in ##linux  they may have a suggestion
[23:20] <cpare> seems to be failing the mount after the lates 7.x patches
[23:21] <MASTERTN> coz_, i searched on the web and i found that the actual kernel not support USB2 DVB Cards
[23:21] <coz_> MASTERTN,  according to that link this is a satellite receiver
[23:21] <Uboss> With Ubuntu 8.04 LTS my laptop went 1-2 hours maximum to give to me battery low. With 9.10 my battery empties at 40-50 mins. Can I do anything?
[23:21] <cpare> sorry 9.04 here
[23:22] <MASTERTN> coz_, thx i will try with ##linux
[23:22] <LinuxGuy2009> Uboss: Edit the power optiosn such as hdd sleep or display brightness on battery use etc.
[23:22] <Mage__> Uboss, try checking your System > Preferences > Power Management settings
[23:22] <Uboss> Thanks both guys.
[23:22] <coz_> MASTERTN,  I am surprised that a german product does not have linux drivers for this
[23:22] <miotatsu> hey um
[23:23] <Uboss> That's why.. I had brightness to 50% on 8.04
[23:23] <miotatsu> I am wondering about getting connection refused errors with ubuntu
[23:23] <miotatsu> in general
[23:23] <MASTERTN> coz_, the pci model work without any problem, but mine is USB2 :(
[23:23] <coz_> MASTERTN,  mm  that's interesing...ok try ##linux they may be able to get that thing up an running :)
[23:24] <Fandekasp> hi
[23:24] <MASTERTN> coz_, thx :)
[23:24] <bouta> hi
[23:24] <kenpark> !hi
[23:24] <miotatsu> when i try to connect to irc servers set to join-on-startup i get these connection refused types of errors a lot, and am unable to connect, i was suggested to this channel
[23:25] <bouta> is there some one who can help me to install virtual box
[23:25] <kenpark> !anyone
[23:25] <miotatsu> it sounds like something or other with linux/ubuntu is fiddling with the connections because it in some cases will refuse /after/ connecting
[23:26] <Mage__> bouta, https://help.ubuntu.com/community/VirtualBox
[23:26] <ilmari> I take it just copying /boot/{initrd,vmlinuz}-$(uname -r) to /cdrom/casper/ won't work to get an updated kernel on a persistent live USB stick?
[23:26] <coz_> boubbin,   sudo apt-get install virtualbox   ??
[23:26] <Diverdude> how can i see how much HD space a program will take up before installing it using sudo apt-get install?
[23:26] <Avenegra> hello, anyone tried L2 tunnels with ssh?
[23:27] <Uboss> Thanks LinuxGuy2009 and Mage_
[23:27] <LinuxGuy2009> sure
[23:27] <Mage__> Uboss, np:)
[23:27] <ilmari> Diverdude: apt-cache show gives you Installed-Size in kilobytes
[23:27] <Uboss> :-) have a nice day/night (here is 01:27AM)
[23:27] <Mage__> Diverdude, not sure how from the command line, btu in synaptic it will tell you
[23:28] <Diverdude> ilmari, but i mean before installing the packet
[23:28] <ilmari> Diverdude: apt-cache show works on any available package
[23:30] <Typos_King> Diverdude   usally it says how much in apt-get
[23:30] <Diverdude> 8 days until new ubuntu hits the public right?
[23:30] <jrib> !lucid | Diverdude
[23:30] <Mage__> Diverdude, what do you mean?
[23:30] <grizzly_> ok, i am back
[23:30] <Diverdude> April 29th....isit delayed+
[23:31] <grizzly_> i found boot files
[23:31] <jrib> Diverdude: no... but continue discussion in #ubuntu+1 please
[23:31] <Mage__> Diverdude, you can use the beta now if you want.  i am right now lol
[23:31] <grizzly_> but there is no menu.lst in grub dir
[23:31] <miotatsu> when i try to connect to irc servers set to join-on-startup i get these connection refused types of errors a lot, and am unable to connect, i was suggested to this channel, would anyone here be able to help with that by any chance?
[23:31] <wubba> I have added two SATA drives to my ubuntu server.  How can I make these drive auto mount?
[23:31] <jrib> !fstab | wubba
[23:31] <grizzly_> how to add vista/win 7 boot to grub?
[23:31] <jrib> grizzly_: what version of ubuntu?
[23:31] <darolu> wubba, use fstab to mount them
[23:31] <mitchell_> what can i use instead of iTunes for my iPod touch?
[23:31] <grizzly_> 9.10
[23:31] <zvacet> Diverdude:  not it is not every ubuntu comes in april and october
[23:31] <jrib> grizzly_: should get automatically recognized
[23:31] <jrib> !grub2 | grizzly_
[23:31] <wubba> darolu, thank you I will check that out.
[23:32] <Mage__> mitchell_, in 9.10 and below use banshee in 10.04 and above rhythmbox should do it
[23:32] <mitchell_> Mage__, http://ubuntuforums.org/showthread.php?t=986876
[23:32] <ori> how do i take a picture of whats on my comp. screen?
[23:32] <jrib> ori: PrintScreen button
[23:32] <mitchell_> I need an alternative to iTunes for iPod TOUCH
[23:32] <marsje> /wc
[23:32] <mitchell_> ipod touch and iphones dont work with banshee
[23:32] <darolu> grizzly_, running "sudo update-grub" should automatically add it
[23:33] <Mage__> mitchell_, hmmm i thought the latest development release fixed that.  have you tried banshee from the banshee ppa?
[23:33] <mitchell_> Mage__, i just used apt-get install banshee
[23:33] <zvacet> ori:  applications<accessories>screenshot
[23:33] <ori> thanc
[23:33] <grizzly_> it doesnt
[23:33] <Mage__> mitchell_, the banshee ppa isn't installed by default i will get the link for you
[23:33] <mitchell_> ok thanks
[23:33] <kenpark> mitchell_: https://launchpad.net/~ipod-touch/+archive/ppa
[23:33] <grizzly_> it just says found kernel XXX, and found memtest
[23:33] <mitchell_> thank you
[23:33] <miotatsu> anyone here have experience with connection refused errors with ubuntu? ;.;
[23:34] <arch0njw> howdy -- looking for the command line to do a distribution upgrade
[23:34] <arch0njw> not apt-get dist-upgrade ;)
[23:34] <Mage__> kenpark, you beat me to it lol
[23:34] <darolu> grizzly_, did you make a fresh install of 9.10 or upgraded from 9.04?
[23:34] <kenpark> miotatsu: i think you need to reword your question. Like what are you connecting to and whats the error.
[23:34] <grizzly_> i made fresh install
[23:34] <Mage__> arch0njw, update manager -d
[23:34] <grizzly_> thing is that i delted win7 boot files
[23:35] <grizzly_> and i copied them from neighbors computer
[23:35] <grizzly_> grldr and mootmgr
[23:35] <deserteagle> please help, grub won't boot up at all. It reboots the second it displays "loading stage1.5"
[23:35] <arch0njw> Mage__: that's the GUI.  need a CLI only command.
[23:35] <miotatsu> kenpark: connecting to irc servers, and the error being connection refused, including returning the refused error /after/ a connection
[23:35] <jc> Hi.  Ubuntu 9.10- When I click places, connect to a server, I get a mount on my desktop.  How do I reference where that mount point is in the terminal?  Thanks!
[23:36] <Mage__> arch0njw, let me check
[23:36] <fr3nzy> I've just installed gnome-core and xsplash, but I don't know how to make the login screen look the same as the one with the normal ubuntu karmic desktop installation. I was installing everything bottom to top from the command line. Anyone knows if there's a package that does this? ubuntu-xsplash-artwork only changed the background, but not the login window / bottom panel.
[23:36] <darolu> grizzly_, oh I see, I have no idea what the win7 boot files are, if you have the installation DVD/CD use it to fix it; it should have recovery tools. I'm not sure if you'll get many answers about recovering windows boot files in this channel, try asking in a windows forum/irc channel
[23:37] <grizzly_> they wont answer
[23:37] <grizzly_> and i cant use dvd reader
[23:37] <arch0njw> Mage__: thank you :)
[23:37] <grizzly_> it wont read anything...
[23:37] <mylfu> gi
[23:37] <Mage__> arch0njw, hmm if this website speaks truth this command should do it. sudo do-release-upgrade
[23:38] <grizzly_> can i somehow add entry to grub menu?
[23:38] <darolu> grizzly_, I suppose Microsoft has documentation about it in its support site, try there; I honestly have no idea how win7 boot files are, sorry.
[23:38] <grizzly_> darolu, tnx anyway ;)
[23:38] <capon_> hi all, how do I install a xsplash theme?
[23:38] <histo> grizzly_: what version of ubuntu
[23:38] <arch0njw> Mage__: brilliant.  Thank you :)
[23:38] <Mage__> grizzly_, https://help.ubuntu.com/community/Grub2
[23:38] <Mage__> arch0njw, np :D
[23:39] <kenpark> grizzly_: there is a package called os_prober
[23:39] <jc> Hi.  Ubuntu 9.10- When I click places, I successfully connect to a server(SMB share), I get a folder on my desktop.  How do I reference where that mount point is in the terminal?  Thanks!
[23:39] <Mage__> grizzly_, i am assumign you are using karmic (9.10)
[23:39] <histo> !splash | fr3nzy
[23:39] <capon_> hi all, how do I install a xsplash theme?
[23:39] <histo> capon_: ^^^^^^^^^^^
[23:39] <fr3nzy> Thanks histo.
[23:40] <darolu> jc, generally it's mounted at /home/<user>/.gvfs
[23:40] <capon_> the internet connection disconnected, so I ddnt see histo
[23:40] <kenpark> jc: find out where it has been mounted to :-) Just go in to the folder and you will see the path. Thats your mount point
[23:40] <mitchell_> Mage__, I added that PPA to my apt and did apt-get update. now how do I install that version of banshee?
[23:40] <darolu> jc, in a terminal run "mount" it will list all of your mounted devices and their paths
[23:40] <histo> jc: you can type mount in a terminal and it will list all the current mounts
[23:40] <histo> ha
[23:40] <jc> darolu, THANKS!  I've been wondering for ages. :)
[23:40] <Mage__> mitchell_,  sudo apt-get upgrade
[23:40] <jc> histo, thanks.
[23:41] <capon_> histo, could you plz re tell me?
[23:41] <Ger_Gran> Hi there!
[23:41] <histo> !splash > capon_
[23:41] <mitchell_> !splash
[23:41] <grizzly_> Mage__, yes, i am on 9.10
[23:41] <EruditeHermit> hey, does anyone know of an up to date ffmpeg ppa?
[23:41] <LinuxGuy2009> Are there any channels for getting started programming for Ubuntu or Linux in general?
[23:41] <Mage__> grizzly_, then that page should be perfect:)
[23:42] <grizzly_> i wok tnx
[23:42] <Mage__> EruditeHermit, the medibuntu ppa
[23:43] <kenpark> grizzly_: Have you tried the os_prober package?
[23:43] <EruditeHermit> Mage__, they seem to have only ffmpeg 0.5.1 which I am told is a year old
[23:43] <grizzly_> i will try startup manager first
[23:43] <Mage__> EruditeHermit, hmm let me check that
[23:43] <grizzly_> if that doesnt work i will fo for os-probe
[23:44] <Mage__> EruditeHermit,  .5.1 was released on march 2nd
[23:44] <Mage__> EruditeHermit, here is the official link http://ffmpeg.org/
[23:44] <deserteagle> if a liveCD fails to install a working OS, what should be the next  step?
[23:44] <darolu> LinuxGuy2009, any particular language?
[23:45] <EruditeHermit> Mage__, according to the guys in #ffmpeg it was a bugfix release of 0.5.0 which was released a year ago. Therefore none of the changes that occurred in the master tree are in there
[23:45] <LinuxGuy2009> darolu: Well thats something I havent decided on yet. I only currently know VB and Basic but am open to new ones.
[23:45] <darolu> deserteagle, why would a LiveCD fail to install? other option is to use the Alternate CD
[23:45] <EruditeHermit> Mage__, http://ffmpeg.org/releases/ffmpeg-0.5.1.release
[23:45] <Mage__> EruditeHermit, apparently i need to dig deeper lol *rolls up sleeves*
[23:46] <darolu> LinuxGuy2009, start with Python, is quite easy and most applications' plug ins are written in python
[23:46] <ukebane> is it possible to get the resolution of the console higher? (non X)
[23:46] <deserteagle> darolu: why? that's a good question, as it has never failed before. Now whenever the install finishes and I reboot, grub gives me all sorts of issues (whether Ubuntu 9.10 or Crunchbang 9.10)
[23:46] <LinuxGuy2009> darolu: cool Ill start there then. Thanks.
[23:47] <NoOutlet> deserteagle: Have you changed the drive you're using to run the LiveCD?
[23:47] <deserteagle> i even bought a new one
[23:47] <zvacet> deserteagle: check https://help.ubuntu.com/community/BurningIsoHowto
[23:47] <deserteagle> errrm you mean the CD drive?
[23:47] <NoOutlet> Yeah.
[23:47] <Mage__> EruditeHermit, you are correct but from what i see no other release has been made since .5.1 so that is the most current
[23:47] <NoOutlet> My LiveCD didn't work when I used my DVD drive, but it did when I used my CD-RW drive.
[23:47] <deserteagle> NoOutlet, hadn't thought of that, i'll run a disk check
[23:47] <darolu> deserteagle, then start looking for GRUB2 documentation to fix the problem
[23:48] <deserteagle> darolu, that's why I'm here, i've been googling and trying stuff out for the past 3 days
[23:48] <EruditeHermit> Mage__, true, but I think that is the only release ffmpeg has ever made. I think they are a project that doesn't release much so people are expected to use svn
[23:48] <mylfu> http://paste.ubuntu.com/400268/
[23:48] <darolu> deserteagle, what are the errors grub2 prints?
[23:48] <deserteagle> NoOutlet, would it matter that both CDs run live perfectly and never give me issues during the install?
[23:49] <EruditeHermit> Mage__, atleast for the codec I want, I need ffmpeg newer than 09/2009
[23:49] <Mage__> EruditeHermit, darn if that's the case it may be difficult to track down the "real" current i'll explore some code sites
[23:49] <deserteagle> darolu, right now it prints nothing, it just reboots the second it reads "loading stage1.5"
[23:49] <EruditeHermit> Mage__, atleast thats what the ffmpeg guys told me. So I was trying to find a way not to have to compile it myself
[23:50] <stealth-> is there a utility where I can give a user a command or something, and get a remote shell on their machine? This way I don't have to tell him how to configure port forwarding and so on
[23:50] <NoOutlet> Well, if that drive has run a LiveCD before and it's been fine, then I would guess it's a different issue.
[23:50] <wubba> stealth-, MS or linux or mac?
[23:50] <EruditeHermit> Mage__, just to explain my predicament. Thanks for helping me, I appreciate it a lot btw.
[23:50] <stealth-> wubba: both machines are linux
[23:50] <Mage__> EruditeHermit, according to launchpad the latest for karmic was rolled 10/13/2009, and for lucid was 3/4/2010
[23:50] <wubba> stealth-, VNC is the only thing I know for Linux - but takes sometime to setup
[23:51] <stealth-> it would be even better if I could get screen control
[23:51] <stealth-> set up on their end or mine?
[23:51] <wubba> on theres
[23:51] <stealth-> I'm trying to give remote it support
[23:51] <wubba> but there are some great tutorials
[23:51] <stealth-> and I don't want to put the user through pain...
[23:51] <stealth-> okay
[23:51] <stealth-> thanks
[23:51] <wubba> yw
[23:51] <deserteagle> NoOutlet, that's what I figured
[23:52] <EruditeHermit> Mage__, yeah but the wrong branch of their tree. 0.5.1 is a bugfix release of 0.5 which is march 3 2009. 09/2009 or newer of MASTER is what I am looking for
[23:52] <k3rn> hi
[23:52] <k3rn> I still couldn't solve the new problem with vdekvm after my upgrade to karmic.
[23:52] <k3rn> i just posted a thread at ubuntu forums, maybe someone here can a look at it: http://ubuntuforums.org/showthread.php?p=9017128#post9017128
[23:52] <yourmghq> i need help
[23:53] <Mage__> EruditeHermit, i think your best option would be to probably just dowload the code from there repository on the site and compile it.  Since everything i am seeing is the .5.1
[23:53] <yourmghq> i cant burn an image
[23:53] <yourmghq> file
[23:53] <yourmghq> to my dvd-rw
[23:53] <yourmghq> the drive doesnt even seem to try to mount
[23:53] <Mage__> yourmghq, have you tried brasero?
[23:53] <yourmghq> the problem is in windows it detected dvd-rws
[23:53] <yourmghq> yes sir
[23:53] <jc> yourmghq, can you read from this device?
[23:53] <yourmghq> or mam
[23:53] <deanus> Compile ffmpeg the easy way. http://ubuntuforums.org/showthread.php?t=786095
[23:54] <yourmghq> jc how should i do it
[23:54] <jc> pop in a disc with data on it
[23:54] <yourmghq> hmm
[23:54] <yourmghq> yes
[23:54] <yourmghq> it has before
[23:54] <jc> does it now?
[23:54] <yourmghq> GTA IV
[23:54] <jc> just to see if the drive didn't die...
[23:54] <yourmghq> which is on  a dvd-r
[23:55] <deserteagle> bleh, at least now it doesn't reboot, it just stays at "GRUB Loading stage1.5."
[23:55] <mitchell_> Mage__, i did apt-get upgrade
[23:55] <mitchell_> now what?
[23:55] <yourmghq> yes it loaded jc
[23:55] <Mage__> did it install the new version?
[23:55] <yourmghq> and mounted too
[23:55] <mitchell_> Mage__, looks the same to me
[23:55] <mitchell_> should i restart?
[23:55] <yourmghq> and it says it is a CD/DVD drive
[23:56] <omikron4> i need to connect to ubuntu spanish, How can I do it?
[23:56] <Pici> omikron4: type: /join #ubuntu-es
[23:56] <Mage__> mitchell_, hmm i would suggest waiting for the next version of ubuntu then since it has iphone and ipod touch support out of the box :/
[23:56] <yourmghq> so jc
[23:56] <yourmghq> what should i do
[23:56] <omikron4> Thanx -ici
[23:56] <mitchell_> Mage__, :/
[23:57] <mitchell_> :(
[23:57] <cyberjunk502> how can i automatically mount windows partion on boot.
[23:57] <kavurt> my computer cannot see the ethernet. what can I do?
[23:57] <Mage__> mitchell_, i will see if there is a way to get the new library for it on karmic though but i can't guarantee it
[23:58] <mitchell_> Mage__, ok thanks :)
[23:58] <Awesome86> could anyone help me? I need to remove gnome from ubuntu and booting exclusively with X11
[23:58] <tprankd> Is it possible to find out the exact sound card model (onboard) through terminal?  On the site, it's just referred to as "HD Audio Device"
[23:58] <mylfu> help http://paste.ubuntu.com/400268/
[23:59] <zvacet> cyberjunk502 : see http://newyork.ubuntuforums.org/showthread.php?t=872197
[23:59] <tprankd> I want to get stereo mix working on Ubuntu
[23:59] <sayao> just tried the ubuntu beta cd, it's nice that my video card worked with compiz :)
[23:59] <arch0njw> tprankd: try "sudo lspci | grep -i audio"
[23:59] <sayao> the new artwork sux tho, very ugly
[23:59] <Mage__> mitchell_, use at your own discretion http://www.webupd8.org/2010/01/easy-way-to-sync-your-iphone-with.html ignored the top one for removing
[23:59] <histo> cyberjunk502: it should mount on boot automatically
[23:59] <Awesome86> does anybody know how to remove gnome and boot using X11??