[08:48] <happyaron> hi, could anybody have a look at bug 476269 ?
[08:51] <kwwii> hey ev, I cannot open the archive with the images on the kashmir bug...could you give it a try?
[08:57] <ev> kwwii: http://people.canonical.com/~evand/tmp/lucid-changes-nicholas.zip
[08:57] <ev> you probably didn't have p7zip installed
[09:03] <kwwii> oh man, this guy is killing me
[09:04] <kwwii> the map is not even that accurate
[09:06] <kwwii> ev: ok, I will add the extra bits to india (and I admit that I missed one part of the chinese map), that should about do it I think
[09:06] <ev> awesome!
[09:06] <ev> thanks a bunch
[09:06] <kwwii> I hope I get to it today, but it might have to wait until tomorrow
[09:26] <ev> no rush
[10:21] <ev> michaelforrest1: http://people.canonical.com/~evand/screenshots/wubi/wubi-10.04-beta-1/
[10:24] <michaelforrest1> ev: nice one
[11:52] <CIA-3> ubiquity-slideshow-ubuntu: evand * r238 ubiquity-slideshow-ubuntu/debian/changelog: Note freeze exception.
[12:44]  * cjwatson attempts to pull out a ubiquity-common package
[14:03] <CIA-3> ubiquity-slideshow-ubuntu: evand * r239 ubiquity-slideshow-ubuntu/ (debian/changelog update-launchpad-translations.sh): Update the update-launchpad-translations script.
[14:27] <CIA-3> ubiquity-slideshow-ubuntu: evand * r240 ubiquity-slideshow-ubuntu/ (252 files in 5 dirs): Update translations from Launchpad.
[14:28] <ev> there must be a better way of pulling URLs out of multi-line HTML translations other than lots of rough sed commands and sore eyes.
[14:36] <CIA-3> ubiquity-slideshow-ubuntu: evand * r241 ubiquity-slideshow-ubuntu/debian/changelog: releasing version 16
[14:39] <persia> ev: You could always use an SGML parser, etc.  That said, most of the ones I've used are painfully slow.
[14:40] <ev> persia: sorry, to be clear, this is HTML in msgstr, where the URL can continue past the end of the line
[14:40] <ev> for instance:
[14:40] <ev> "Let us know about your Ubuntu experience at <a href=\"http://ubuntu.com/"
[14:41] <ev> "community\">ubuntu.com/community</a>!"
[14:41] <persia> And those are two *different* msgstr values?
[14:42] <ev> no, it's a singular msgstr
[14:42] <persia> So the msgst just contains a \n ?
[14:42] <ev> right
[14:43] <ev> hrm, I could just work off the translated copies
[14:43] <persia> No problem.  SGML parsers all treat all sorts of whitespace identically.
[14:43] <ev> that would allow me to go with the SGML parser route you suggest
[14:43] <persia> So if you can get something to eject the full msgstr (including \n) and pipe that into the parser, you should be good.
[14:44] <ev> exactly
[14:45] <ev> I can just run make and use the parser on the build directory
[14:45] <ev> hooray
[14:45] <ev> thanks
[14:47] <persia> Happy to help.  I once wrote a parser in perl, and I remember just how painful it is to do from scratch :)
[14:48] <persia> (that parser wasn't even perl5 compatible, and is safely long dead, and should never see the light of day)
[14:54] <cjwatson> I think there's a gettext library in python?
[14:54] <cjwatson> I remember it being able to parse .po files
[14:55] <cjwatson> hmm, or can it
[14:55]  * cjwatson looks through elderly IRC logs
[14:57] <cjwatson> oh well, seems like you have a solution
[15:04] <CIA-3> ubiquity-slideshow-ubuntu: evand * r242 ubiquity-slideshow-ubuntu/ (debian/changelog generate-local-slides.sh): Force UTF-8 for po4a-translate as well.
[17:07] <ev> cjwatson: thanks just the same
[17:47] <CIA-3> ubiquity: evand * r3978 ubiquity/ (debian/changelog ubiquity/components/ubi-language.py): Don't show the alpha warning in OEM mode when it's disabled.
[18:44] <bladernr_> thought I'd mention this: bug 546255
[19:16] <CIA-3> ubiquity-slideshow-ubuntu: evand * r244 ubiquity-slideshow-ubuntu/ (3 files in 2 dirs): Updated Rhythmbox and Ubuntu One slides. Thanks Matt Griffin!
[19:34] <CIA-3> ubiquity-slideshow-ubuntu: evand * r245 ubiquity-slideshow-ubuntu/slideshows/ubuntu/slides/ (rhythmbox-totem.html ubuntuone.html): Small tweaks and missing titles from Matt.
[19:45] <katycorp> Hey everyone, I just did a fresh install of 9.10 64 bit and grub fails to boot. When I put in the livecd and select "boot from the first hard disk", I get a grub error: "no such partition" and it drops to a grub rescue>. Anyone know how to debug this?
[20:07] <bladernr> Is there any way to get a text file that contains the contents of the summary window on the final page in Ubiquity (just before the install begins)?
[20:08] <bladernr> couldn't find anything in the logs...
[20:08] <bladernr> katycorp:  no idea off hand, but are you sure the install was successful, disk is good, etc?
[20:09] <katycorp> bladernr: I checked the disk for defects before install, and it had all the appearances of finishing the install successfully
[20:10] <bladernr> if you boot back into the life env (from cd) and open a terminal and do a sudo fdisk -l do you get a partition table? e.g do you get info on your partitions?
[20:10] <katycorp> yeah I just did that
[20:10] <katycorp> I was following this: http://linuxers.org/howto/how-recover-grub2-ubuntu-910-karmic-koala
[20:11] <katycorp> when I tried grub-mkconfig I got an error about no partition table
[20:11] <katycorp> then I tried installing grub on the MBR
[20:11] <katycorp> grub-install /dev/sda
[20:12] <katycorp> and it seemed to work ok, but I just rebooted and it didn't work
[20:24] <bladernr> ugh... sorry... I know little about the magical inner workings of grub2 :(
[20:24] <bladernr> sorry for the delay too, I've got too many things going on at once
[20:26] <CIA-3> ubiquity-slideshow-ubuntu: evand * r246 ubiquity-slideshow-ubuntu/slideshows/ubuntu/slides/rhythmbox-totem.html: Shorten the Rhythmbox title
[20:26] <katycorp> well fdisk lists the partitions before I chroot
[20:26] <katycorp> and then after I chroot it says "cannot open /proc/partitions
[20:28] <bladernr> weird...
[21:15] <cjwatson> katycorp: before you chroot, 'sudo mount --bind /proc /path/to/chroot/proc' and the same for /sys and /dev.  Remember to 'sudo umount /path/to/chroot/proc' etc. before rebooting
[22:16] <CIA-3> ubiquity-slideshow-ubuntu: evand * r247 ubiquity-slideshow-ubuntu/slideshows/ubuntu/slides/ (rhythmbox-totem.html ubuntuone.html): Fold a bullet point from the Ubuntu One slide into another bullet point on the Rhythmbox slide to better fit the text.
[22:20] <CIA-3> ubiquity: evand * r3979 ubiquity/debian/real-po/ (81 files): debconf-updatepo
[23:15] <CIA-3> ubiquity: evand * r3980 ubiquity/debian/ubiquity-frontend-gtk.install: Install all the GtkBuilder files, not just the step* files.
[23:24] <CIA-3> ubiquity: evand * r3981 ubiquity/ (72 files in 4 dirs):
[23:24] <CIA-3> ubiquity: Add translations for the locale's preferred time format and
[23:24] <CIA-3> ubiquity: respective format string, as imported from gnome-panel
[23:24] <CIA-3> ubiquity: (LP: #538156).
[23:26] <CIA-3> ubiquity: evand * r3982 ubiquity/debian/real-po/ (81 files): debconf-updatepo
[23:36] <CIA-3> ubiquity: evand * r3983 ubiquity/debian/changelog: releasing version 2.2.8
[23:45] <CIA-3> ubiquity-slideshow-ubuntu: evand * r248 ubiquity-slideshow-ubuntu/debian/changelog: releasing version 17