[00:40] <jolaren> Is there any quick way to remove duplicates fast?
[03:10] <puff> Hi all.
[03:11] <puff> tgm4883: So, you were asking me what jacks my set-top has:  http://darksleep.com/puff/dvr
[03:11] <Zinn> [darksleep.com]
[04:20] <MisterK85> Hi there everyone. I got the 32-bit version of Mythbuntu downloaded and burned. Running AMD Sempron @ 1.6GHz with 1GB of RAM with the following hardware: 80GB Drive, ATI Radeon 9250 AGP, Modem (for Windows dualboot) and BT848 Video Capture. I get to the boot up and it freezes up with flashing white cursor. Any ideas?
[04:31] <MisterK85> Anyone able to help?
[05:02] <qwebirc76327> After upgrading to Lucid, my remote doesn't work.  I type "irw" and I don't see any codes. Can someone offer a suggestion?
[05:29] <qwebirc76327> I found the solution.  This is a known bug in lirc for PVR250 with a patch available via Ubuntu's "proposed" releases.
[06:49] <ripperda> how do I know what version of mythbuntu I have installed?
[06:52] <ripperda> ah dumb question, mythbuntu version is same as ubuntu.
[06:53] <Nixon> mythfrontend - information center - system status
[06:53] <Nixon> atleast what version of myth
[06:54] <ripperda> so I know I have ubuntu 9.10 & mythtv .22. I couldn't recall what mythbuntu I installed and wasn't sure if it was 10.04
[06:54] <Nixon> no, it will be 9.10 if you installed 9.10
[06:54] <ripperda> after a little digging, I clearly don't have 10.04, because that's the ubuntu version and it includes mythtv .23 (which is what I'm interested in)
[06:55] <Nixon> hit the upgrade button and you got 10.04
[06:55] <ripperda> ah, where will I find that?
[06:55] <Nixon> update manager in your ubuntu system menu
[06:56] <ripperda> got it.
[06:56] <ripperda> so, I have a backend + 2 frontends, all running ubuntu 9.10. is there a recommended order of upgrade? start with the backend?
[06:57] <Nixon> I have only done it with a single machine, I'd say you need to do all 3 ofcourse.. I don't know if one order is better then the others
[06:57] <ripperda> ok, I'll start with the backend
[06:57] <ripperda> and do the others right after that gets upgraded
[06:58] <ripperda> I'm pretty familiar with debian (main desktop for 10+ years), just looking for ubuntu/mythbuntu specifics
[07:00] <Nixon> my 9.10-10.04 upgrade went flawlessly, but your mileage may vary
[07:01] <ripperda> ok, I kicked off the backend in my office, so I'll let that run for a while
[07:01] <ripperda> thx for the tips
[09:37] <Scuttle> is anyone using the Terratec H5 or H7 USB here in ubuntu?
[11:15] <qwebirc64437> hi
[11:16] <qwebirc64437> anyone here, who knows something about mythbuntu?
[11:16] <qwebirc64437> i need help, i dont know how to configure my dvb-s card
[11:17] <qwebirc64437> it is a TechniSat SkyStar 2 pci - version
[11:17] <qwebirc64437> it should be supported by mythtv
[11:17] <qwebirc64437> but i have no idea, what settings i have to use
[12:06] <jolaren> I'm havin loas of troubles with miro.. I get this when trying to run mirobridge with the verbose comman
[12:06] <jolaren> Importing Miro functions has an issue. Miro must be installed and functional, error(Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Not running within active session))
[12:06] <Zinn> [projects.gnome.org] GConf configuration system
[12:14] <jolaren> and I know its experimental but can only get the flash palyer on mythweb to run for a foew seconds
[14:18] <marcuy>  any help with setting up a Conexant CX23880/1/2/3 PCI video tuner on Ubuntu??
[18:07] <MisterK85> Hi everyone, just used Wubi to install Mythbuntu on my system. I have a Radeon 9250 AGP 128MB. It's crashing at "radeon: ib pool ready." Any ideas?
[18:16] <MisterK85> Anyone? Please?
[19:17] <MisterK85> ...anyone?
[20:13] <recsa> Hi all, im just seting up my first Mythbuntu ... not much success so far :( my first problem: during installation i was asked for IR controller and the wizard corrctly detected my Haupauge 1120 as IR controller, but now im on backend setup scrrens and IR remote doesnt work, any hint?
[20:24] <recsa> BTW i have installed Mythbuntu 10.04
[20:30] <mcl0vin> !CX23418
[20:30] <Zinn> Sorry I don't know about CX23418
[21:15] <recsa> Why my mythbuntu is scanning for analog air channels instead of OTA DVB-T?
[22:28] <mcl0vin> now when i try to watch live tv, i get this error "Error:MythTV is using all inputs, but there are no active recordings?"
[22:39] <recsa> did you setup card, video source and connections?
[22:45] <recsa> would be very very very grateful if some1 helps me setup my backend
[23:07] <recsa> yay one problem solved
[23:08] <recsa> DVB-T channels scanned and saved
[23:08] <recsa> now i just need to get this dam Remote control working
[23:09] <recsa> MCC is correctly showing Hauppauge HVR-1100 IR
[23:10] <recsa> but the remote just doesnt work