[00:00] <SovereignEntity> __-osh-__:  never tried that i was under the impression that i was mounting the drive
[00:01] <__-osh-__> SovereignEntity: No, just "mount" doesn't mount anything. "mount -a" mounts everything not mounted in the fstab-file.
[00:01] <__-osh-__> SovereignEntity: and there are some other things with it as well.
[00:01] <__-osh-__> SovereignEntity: So, what does it say?
[00:01]  * dukem hello all
[00:04] <SovereignEntity> __-osh-__: no output
[00:04] <__-osh-__> SovereignEntity: that's not possible.
[00:05] <__-osh-__> SovereignEntity: mount. no quotes, no nothing. just mount
[00:05] <SovereignEntity> __-osh-__: can't find _a in /etc/fstab or /etc/mtab
[00:05] <__-osh-__> SovereignEntity: that's the output? from the command mount
[00:05] <__-osh-__> SovereignEntity: ??
[00:06] <SovereignEntity> __-osh-__:  no output
[00:07] <__-osh-__> make a pastebin of you typing that command please.
[00:08] <SovereignEntity> __-osh-__: http://paste.ubuntu.com/441113/
[00:09] <__-osh-__> SovereignEntity: do a df -h also.
[00:09] <__-osh-__> SovereignEntity: that has to produce some output.
[00:09] <__-osh-__> SovereignEntity: Not "mount -a"
[00:09] <__-osh-__> SovereignEntity: "mount"
[00:09] <__-osh-__> SovereignEntity: except for the quotes
[00:11] <__-osh-__> SovereignEntity: I do believe that "mount -a" produces no output, because that's the default behaviour for a successfull mount. So you successfully managed to mount everything in the fstab that wasn't mounted. Which was nothing.
[00:11] <SovereignEntity> __-osh-__: http://paste.ubuntu.com/441115/
[00:12] <__-osh-__> SovereignEntity: you're fairly new to linux, right?
[00:12] <SovereignEntity> right
[00:12] <sebastian> anyone got some experience with dual screen through HDMI?!
[00:13] <__-osh-__> SovereignEntity: So you have one disk mounted on /media/Storage
[00:13] <__-osh-__> SovereignEntity: 19GB.
[00:13] <SovereignEntity> __-osh-__: youre right gparted now says they are mounted
[00:14] <__-osh-__> SovereignEntity: 66Meg used.
[00:14] <SovereignEntity> sudo mount -a is not auto is it
[00:14] <__-osh-__> SovereignEntity: so "ls /media/Storage" without quotes should show you the files.
[00:15] <__-osh-__> SovereignEntity: what do you mean by "auto"? it does automatically mount all disks found in /etc/fstab yes.
[00:15] <SovereignEntity> __-osh-__:  i do that in fstab right
[00:16] <__-osh-__> SovereignEntity: No.
[00:16] <__-osh-__> SovereignEntity: Don't put anything like that in fstab. You'll screw your system.
[00:16] <__-osh-__> SovereignEntity: /etc/fstab needs to look like it does. The syntax is important.
[00:17] <sebastian> anyone got some experience with dual screen through HDMI?!
[00:17] <__-osh-__> sebastian: sorry, no.
[00:17] <SovereignEntity> __-osh-__:  I have one ubuntu system 10.04 that opens the drive without the password
[00:17] <SovereignEntity> this one has to have a password
[00:17] <__-osh-__> SovereignEntity: what password? your "sudo" password?
[00:17] <SovereignEntity> yes
[00:18] <SovereignEntity> strange
[00:18] <__-osh-__> SovereignEntity: so when do you type that password?
[00:19] <SovereignEntity> __-osh-__: in gnome i go to places click on the drive and a box opens asking for a password
[00:19] <__-osh-__> SovereignEntity: Yeah, that's when you mount the drive.
[00:20] <SovereignEntity> maybe i dont own the drive if there is such a thing in Linux
[00:20] <__-osh-__> SovereignEntity: You could mount it automatically from fstab, but if you don't know what you're doing then you could really break your system.
[00:20] <SovereignEntity> __-osh-__: ok thats what i was thinking
[00:21] <SovereignEntity> __-osh-__: ok i got that idea from a site
[00:21] <__-osh-__> SovereignEntity: I suggest reading a lot about fstab, make a rescue disk so that you can restore the system. Read a bit more about fstab and how to mount drives. Then give it a try.
[00:22] <__-osh-__> SovereignEntity: after you've edited the fstab file you either reboot (risky) or type "sudo mount -a"
[00:22] <__-osh-__> SovereignEntity: if you broke something it'll complain.
[00:23] <__-osh-__> SovereignEntity: I can't help you since it's late here and I'm off to bed.
[00:23] <SovereignEntity> __-osh-__:  ok I'll do some more reading first thanks you thank you thank you
[00:24] <__-osh-__> SovereignEntity: it's something along the lines of (from memory)
[00:24] <SovereignEntity> _ i put your text in my notes
[00:25] <__-osh-__> SovereignEntity: "device_of_drive mountpoint type options_for_mount priority_someting and_priority_something_else"
[00:25] <__-osh-__> SovereignEntity: example
[00:26] <__-osh-__> SovereignEntity: /dev/hda1 /my_drive ntfs ro,user 0 0
[00:27] <__-osh-__> SovereignEntity: but don't use that syntax. I'm digging deep into memory here.
[00:28] <__-osh-__> SovereignEntity: I'm off now. Good luck and do come back here for more help. Most people here are very friendly and helpful.
[00:28] <SovereignEntity> __-osh-__: good night
[00:29] <__-osh-__> SovereignEntity: you too. whenever that is. =)
[00:34] <sebastian> anyone got some experience with dual screen through HDMI?!
[00:34] <sebastian> or, does anyone know how to change into hdmi sound output in kmix, or is it easier with some other program?
[00:40] <DarthFrog> sebastian: Use System Settings/Multimedia to set which sound output device is used.
[00:44] <sebastian> DarthFrog i tried that but theres still no sound
[00:48] <DarthFrog> sebastian: Did it give sound in the Multimedia settings from the Test button?
[00:48] <sebastian> no, tried them all but no sound on my tv, works fine on windows tho
[00:48] <sebastian> thats whats weird
[00:49] <DarthFrog> Are you running Mythbuntu?
[00:49] <sebastian> xbmc
[00:49] <DarthFrog> Don't know that one.
[00:49] <DarthFrog> What video card is it?
[00:49] <sebastian> its not the program its kubuntu
[00:49] <sebastian> i want the sound to transfer through the hdmi
[00:49] <sebastian> ati asus EAH 4670
[00:49] <DarthFrog> Are you using the fglrx drivers?
[00:50] <sebastian> ya the standard one
[00:50] <DarthFrog> What do you mean "the standard one"?
[00:50] <sebastian> the official didnt work on xbmc, and i want a player with gpu acceleration for my hd movies
[00:50] <sebastian> the one that came with kubuntu
[00:52] <DarthFrog> Do you see an output to a HDMI device in Output Device Preference in Multimedia?
[00:53] <sebastian> yep
[00:53] <sebastian> i tested it but theres no sound coming from it
[00:53] <DarthFrog> Do you have the snd_hda_codec_atihdmi module loaded?
[00:54] <sebastian> what do u mean by loaded?
[00:54] <DarthFrog> lsmod | grep snd
[00:54] <DarthFrog> Is it there?
[00:54] <sebastian> snd_hda_codec_atihdmi     2367  1
[00:54] <DarthFrog> Hmm.  I'm now out of ideas.
[00:55] <sebastian> it can be that this driver dont support it
[00:55] <sebastian> i may need the offical one
[00:55] <sebastian> but then i wont be able to use xbmc, u know any media center with gpu acceleration for HD movies?
[00:55] <DarthFrog> Kubuntu is providing you with an official ATI driver.
[00:56] <sebastian> ya on restricted drivers, but im not using it atm cause of the xbmc problem
[00:57] <sebastian> gonna try with activating it then
[00:57] <DarthFrog> OK, sounds good.  I've never used HDMI audio, just video.
[00:58] <sebastian> u know if Mythbuntu plays mkv well?
[00:58] <DarthFrog> Yes.
[00:58] <sebastian> ok, thx for the help, i tell u if it works just gonna restart the comp :)
[00:58] <DarthFrog> Good luck.
[01:01] <sebastian> now its working :)
[01:02] <DarthFrog> Glad to hear it.
[01:02] <DarthFrog> And so are you. :-)
[01:02] <sebastian> thx a lot :)
[01:02] <sebastian> haha ya
[01:02] <sebastian> now its up to the test with mythbuntu :D
[01:42] <Microshaft> just upgraded from intrepid to karmic on kubuntu - using nvidia 185 driver - can't start X - error message: module build for the curently running kernal was skipped because kernel source for this kernel does not seem to be installed - my kernel is 2.6.27.17-generic
[01:45] <kylen> How many people :)
[01:45] <Microshaft> how do I download kernel source for karmic please?
[01:50] <e_t_> Microshaft: to build the nvidia module, you need the package linux-headers-generic
[01:51] <Microshaft> linux-headers-2.6.27-17-generic e_t_ ?
[01:52] <Microshaft> or just linux-headers-generic e_t_ ?
[01:52] <e_t_> linux-headers-generic is a meta-package that will grab the latest version, whatever it is.
[01:52] <Microshaft> ok brb
[02:11] <Microshaft> my upgrade to karmic won't give me an X it says fatal failed to load nvidia kernel module no drivers available
[02:11] <Microshaft> I have nvidia-glx-185 installed
[02:15] <e_t_> I'd try aptitude purge nvidia and then reinstall nvidia
[02:18] <Microshaft> aptitude -purge nvidia-glx-185 e_t_ is that how?
[02:19] <Microshaft> ok this is my last go around
[02:19] <Microshaft> if it doesn't work, im going back to intrepid
[02:24] <Izinucs> what are you doing?
[02:51] <Izinucs> Where is "krecord" in the repos for 10.04??
[02:57] <bazhang> !info krecord
[03:17] <vertigo> alguém do brasil por aqui ?
[03:21] <ztkz> how can I enable the KNetWorkManager?
[03:32] <Guest28097> hi
[03:32] <Guest28097> bitch
[04:19] <rav> hello. i just installed lucid and amarok is not playing mp3 files. how can i fix this?
[04:27] <rav> what is the name of the mp3 codec for xine?
[04:32] <dhq> hey i need help...... i cant burn cd's and i dont have a pendrive........ how do i install 10.04
[04:33] <dhq> i have an external harddrive  with 3 partitions one is 45gb the other is 45 and the last one is 3.45gb
[04:33] <dhq> i want to put the iso on the external 3.5gb and install it to my pc
[04:34] <dhq> can someone help me
[04:36] <e_t_> dhq: That would be difficult. You would have to install GRUB to the external disk and set it up to boot the third partition. Why can't you burn CDs?
[04:40] <dhq> e_t_: my rom is broken
[04:45] <e_t_> dhq: That is unfortunate. USB drive and CD are the two primary ways to install Ubuntu.
[04:46] <dhq> no external usbdrive
[04:48] <e_t_> dhq: Do you wish upgrade, or are you installing for the first time?
[04:53] <dhq> e_t_: i want to first time
[04:55] <e_t_> dhq: What is your computer running now?
[04:57] <dhq> dell XPS m1530
[04:58] <e_t_> dhq: operating system?
[05:01] <dhq> e_t_: windows
[05:03] <e_t_> dhq: Do you want to replace Windows, or install Ubuntu along side?
[05:24] <Empty_foo> geeez.. the day that somebody calls gimp intuitive is the day that I buy shares.
[05:31] <anirudh> i have two nics. eth0 connected to internet(static) and eth1 connected to router(dhcp). im not able to enable eth1. if i type ifconfig it shows but it doesnt acquire ip etc. i tried /sbin/ifup eth1 last night it said ignoring unknown interface eth1. then i added 2 lines about eth1 in /etc/network/interfaces and now its listening but not connecting.
[05:32] <well_laid_lawn> anirudh: tried   sudo ifconfig eth1 up   ?
[05:33] <anirudh> yep..
[05:33] <anirudh> in ifconfig now it shows 2 eth1
[05:33] <anirudh> eth1 and eth1:avahi
[05:34] <anirudh> avahi has inet addr, broadcast, subnet etc. this happened after the last /sbin/ifup eth1 use
[05:37] <well_laid_lawn> are you trying to share the internet connection or similar?
[05:40] <anirudh> yes eventually.. but first im just trying to connect it to the router.
[05:40] <well_laid_lawn> there is a bot link for that
[05:40] <well_laid_lawn> !ics
[05:43] <anirudh> ok. but eth1 isnt working. only if it works and detects the router can i share internet!
[05:43] <ztkz> hi, how i enable the knetwork manager by command?
[05:50] <JohnL> I'm having an issue with installing Kubuntu (my first linux distro).  I was installing 9.10 through Wubi over Windows 7 (the default settings). Now it's booting to Linux without a live CD, but before it boots, it gives me the error "No Root File System is Defined. Please correct this from the partitioning menu."  Can anyone point me in the direction to solve this issue?
[05:55] <JohnL> I'm currently looking through some support forums, but nothing seems to really stand out as possible a solution
[05:58] <snarkfish> im trying to link my phone via bluetooth for audio but i cant seem to make it connect to my computer.
[05:59] <snarkfish> it works under windows but not kubuntu
[06:01] <snarkfish> what is the difference in alsa and pulseaudio?
[06:04] <e_t_> snarkfish: pulseaudio is on top of alsa. Functionally, it makes it easier for multiple programs to share the audio hardware, without fighting each other.
[06:04] <snarkfish> so should i install pulseaudio?
[06:04] <snarkfish> why doesnt kde use pulseaudio
[06:05] <e_t_> snarkfish: That's a good question, and one to which I do not have an answer.
[06:05] <e_t_> You can configure KDE to use pulseaudio.
[06:07] <snarkfish> well yes, i know i can configure it.
[06:07] <ztkz> how can i enable the KConnectionManager????
[06:09] <e_t_> ztkz: Can you describe what you want to do?
[06:14] <ztkz> e_t_, the kconnectionmanager is disable , and i can't enable
[06:20] <e_t_> ztkz: I had this happen a few weeks ago. You need to edit the file (as root) /var/lib/NetworkManager/NetworkManager.state. Change the line that reads "NetworkingEnable=false" to true. Then, "sudo /etc/init.d/networking restart".
[06:34] <JHon^> hey guys i just recently removed ubuntu from my pc and used easy bcd to rewrite my mbr now whenever i try and intall a distro the grub wont show i mean it gets installed without any error but i just dont see the grub it just booting windows is there a way to fix this
[06:51] <nickee> What sw will show which processes are doing tcpip io, & quantity?
[06:57] <e_t_> nickee: all of those functions are handled by the Linux kernel as far as I know.
[06:58] <nickee> e_t_: so, what sw will display that info?
[06:59] <e_t_> You can get information about networking with the "ifconfig" command. You can monitor I/O with the program iotop, which you'll need to install from the repos. I'm not sure what you mean by quantity.
[07:07] <luis_> hello everyone good night i am trying to install openoffice, the newest release i download the version that correspond, i have Kubuntu 8.04(Hardy), i already uninstall the old openoffce and did install the dependencies that newest version ask, it supposed to got installed but i can't find it on the menu or anywhere else, can somebody help me pls??
[07:12] <e_t_> luis_: try putting "soffice" into krunner.
[07:12] <luis_> ok
[07:15] <luis_> ok i opened the run command wich i think is the Krunner and type that but it says: could not run the specified command
[07:16] <e_t_> From where did you install the openoffice packages?
[07:17] <luis_> oficial web site
[07:17] <luis_> http://download.openoffice.org/other.html#tested-full
[07:18] <luis_> i actually downloaded both: RPM and DEB and both runed fine on the installation but i just can't find the icons on the menu
[07:18] <luis_> so i can't use it
[07:21] <e_t_> I think 3.2 is actually the most recent version, but since you're still on 8.04, you must be quite concerned about stability. I believe that the packages from the official website install themselves to /opt. I'd check there and see if you see a bin folder in there.
[07:22] <maxagaz> hi
[07:25] <maxagaz> iphone 3gs is said to be natively supported on lucid, it's true with gnome, but not on kde
[07:26] <maxagaz> how to use iphone on kubuntu ?
[07:26] <e_t_> maxagaz: you can install gnome apps on kubuntu.
[07:27] <maxagaz> e_t_: which package ?
[07:29] <luis_> sorry
[07:29] <luis_> i was looking into the gui
[07:30] <luis_> what do you mean with: to /opt. I'd??
[07:31] <e_t_> maxagaz: I think it's Rhythmbox. You could also install libimobiledevice0, which is a library for accessing the iphone/ipod.
[07:31] <maxagaz> e_t_: I'd like to use amarok
[07:31] <luis_> oohh now i know i see the opt thing
[07:32] <luis_> and i did opened but there are 2 folders one says openoffice.org and the other one says openoffice.org3
[07:32] <e_t_> maxagaz: I think that is planned, but not here yet.
[07:34] <e_t_> luis_: Hmm. I think you probably want the 3 folder.
[07:34] <luis_> ok
[07:35] <luis_> the folder it has are: basis-link, licences, program, readmes, share and uninstall date in that order
[07:35] <e_t_> try program
[07:37] <luis_> i found it
[07:37] <luis_> but how do i put that into the menu?
[07:38] <luis_> is it possible?
[07:38] <e_t_> Look in the directory with the deb files you installed from. I think there's a directory inside there that is 'debian menus' or something like that. There should be .DEBs in there to handle the menu entries.
[07:44] <luis_> i found one that says desktop integration
[07:44] <e_t_> That's it.
[07:45] <luis_> i have install that several times but still can't see anything on the menu
[07:45] <e_t_> Did you log out and back in?
[07:46] <luis_> i did restart the pc
[07:47] <e_t_> Well then, I don't know. I have always preferred the repository openoffice to the "official" version.
[07:48] <luis_> ok txs a lot :p
[08:29] <jlit2010> !list
[08:46] <wedo> hello
[08:46] <wedo> I need help plz
[08:47] <wedo> my system is startup but the main programs does not start automatically like knetworkmanger, printer, bluetooth and cairo dock i have to start them manually
[08:48] <wedo> can anyone help plz
[09:19] <Benkinooby> hi, may computer takes sometime to boot. i diasbeld all the fancy gui stuff to see what's going on. i noticed that boot up takes a lot of time, after the computer performed .../sripcts/init-bottom.... or something like this.... couldn't find any hints on internet. some1 has advice? maybe where to get more detailed information?
[09:24] <jmut> what is latest php package version?
[09:28] <bronlar> hi all
[09:31] <bronlar> ever since i installed kubuntu 10.04 my xp pro installation wont boot. i get an error of a missing hal.dll in windows system32 missing or corrupt it says. can anyone help me? i installed kubuntu last, after installing linux mint 7, and opensuse 11 all on seperate partitions of my hdd and i also have freespire 2.0 installed as well. all give erros and do not boot. i think the grub entries got fubared for all other os'es on my pc except 
[09:33] <well_laid_lawn> bronlar: you could run   sudo update-grub   and see if it fixes it
[09:38] <bronlar> hi laid lawn
[09:38] <bronlar> ill try that but i think i need to run fixmbr, or chkdsk /r or rebuild my boot.ini file
[09:38] <bronlar> or all of the above
[09:39] <bronlar> ill come back and let u know if i get it fixed and what i did to fix it
[09:40] <well_laid_lawn> k bronlar
[09:45] <perlmonkey> hello
[09:45] <perlmonkey> can anyone tell me how to disable the funny vertical panel thing which comes up on icons?
[09:48] <Benkinooby> hi, may computer takes sometime to boot. i diasbeld all the fancy gui stuff to see what's going on. i noticed that boot up takes a lot of time, after the computer performed .../sripcts/init-bottom.... or something like this.... couldn't find any hints on internet. some1 has advice? maybe where to get more detailed information?
[09:50] <perlmonkey> Benkinooby I would check the dmesg log file
[09:50] <Benkinooby> ok...
[09:51] <Benkinooby> i'll paste it
[09:51] <perlmonkey> just run dmesg in a shell to see everything that happened during the boot process
[09:52] <Benkinooby> perlmonkey: http://pastebin.com/H5PxGqhb
[09:52] <perlmonkey> if you want to try and find any errors, just do dmesg | grep fail
[09:54] <Benkinooby> perlmonkey: benedict@box:~$ dmesg | grep fail
[09:54] <Benkinooby> [    0.654848] PM: Resume from disk failed.
[09:54] <Benkinooby> thats all
[09:54] <perlmonkey> try grep error
[09:55] <Benkinooby> nothing comes
[09:55] <perlmonkey> dmesg | grep error
[09:55] <Benkinooby> i think it's no error... jsut it get's tuck somewhere....
[09:55] <perlmonkey> yes could be
[09:55] <perlmonkey> looks like some kind of script
[09:55] <Benkinooby> y
[09:56] <Benkinooby> i usd kubuntu an really tried hard to get rid of that bluetooth thing
[09:56] <Benkinooby> i removed packages, disabled it and alll, but still it comes
[09:57] <perlmonkey> :-/
[09:57] <Benkinooby> maybe this is the cause...
[09:57] <wedo> hello, my system is startup but the main programs does not start automatically like knetworkmanger, printer, bluetooth and cairo dock i have to start them manually
[09:58] <Benkinooby> wedo: hahaha, be happy.... i tried to get rid of bluetooth since weeks... without luck ;)
[10:01] <wedo> Benkinooby: it was working ok with me and if i started it manually its work, my problem is that the autostart programs does not start, "not all of them"
[10:15] <wedo> hello, my system is startup but the main programs does not start automatically like knetworkmanger, printer, bluetooth and cairo dock i have to start them manually
[10:22] <wedo_> hello, when i click the shutdown or reboot it does not do anything
[10:22] <wedo_> any help plz
[10:54] <Kottalizer> How do I turn off the feature that restarts all applications which weren't closed upon last logoff/shutdown?
[11:17] <jonlee> what's this?
[11:21] <Torch> Kottalizer: in system settings
[11:21] <Torch> Kottalizer: advanced -> session manager
[11:23] <Ahox> Hi, is there a nice audiocd-ripper in kde?
[11:23] <Kottalizer> Torch: Thanks once again!
[11:25] <Torch> Ahox: dolphin does that
[11:25] <Torch> Ahox: just enter audiocd:/ in the location bar
[11:26] <Ahox> I tried that, but it complained no such device. Now it works... thnx
[11:33] <dhq> just installed 10.04 and noticed my cpu extremely hot and fan blazing
[11:50] <nico_> Hi. I have akonadi crashes. See https://bugs.launchpad.net/ubuntu/+source/kdepimlibs/+bug/583735 Does anyone know which files or settings can make akonadi crash?
[11:51] <Infinitum-Omega> Don't even know what anaconda is :p
[11:51] <Infinitum-Omega> oh
[11:52] <Infinitum-Omega> anakonadi lol
[11:52] <nico_> its the thing that can make kmail unusable ;)
[11:52] <Infinitum-Omega> kmail? lol
[11:53] <Infinitum-Omega> kubuntu mail?
[11:53] <Infinitum-Omega> kde*
[11:54] <Infinitum-Omega> http://ubuntuforums.org/showthread.php?p=9352954#post9352954 If anyone had Unichrome issues..
[11:56] <Torch> nico_: i don't see any signs of crashes in your launchpad report.
[11:56] <Torch> nico_: also, see http://forum.kde.org/viewtopic.php?f=20&t=86053 for the "no resource agents found" message.
[11:57] <Torch> nico_: there's also http://userbase.kde.org/Akonadi_4.4/Troubleshooting for akonadi troubleshooting
[11:57] <nico_> Torch: originally I uploaded my logs in another bugreport. https://bugs.launchpad.net/ubuntu/+source/akonadi/+bug/554514 Then someone merged the bugs
[11:58] <nico_> Torch: I have read the troubleshooting doc, but no answers tehre
[11:58] <nico_> Torch:  reading the kde forum now
[12:00] <nico_> Torch: The XDG_DATA_DIRS environment variable are the same for two accounts. My situation at this moment is described best at the bottom of  https://bugs.launchpad.net/ubuntu/+source/kdepimlibs/+bug/583735 It seems some setting is causing an akonadi crash
[12:01] <opex> hello
[12:01] <opex> any from bulgaria
[12:02] <nico_> Torch: logs with crash are on http://launchpadlibrarian.net/49187546/logs.tar.gz
[12:13] <Micah> !remaster
[12:16] <Micah> hrm....neither will help me until i get the ethernet/wifi working >.>
[12:16] <Kottalizer> Connect using a wire and then execute "sudo aptitude update && sudo jockey-kde".
[12:16] <Kottalizer> Try to find a wireless driver and activate it.
[12:16] <Kottalizer> Then unplug the wire.
[12:17] <Micah> you missed the first part: ethernet
[12:17] <Micah> neither network interface works
[12:17] <Kottalizer> Oh
[12:17] <Kottalizer> Then hibernate your computer, wake it up and reboot.
[12:18] <Kottalizer> That works.
[12:18] <Micah> and what will that do?
[12:18] <Kottalizer> Hibernate or suspend to RAM, don't know which one it was.
[12:18] <Kottalizer> No idea, but it worked for me.
[12:18] <Micah> well, i'm also running a live cd/persistent usb install so, things are a bit different
[12:19] <Micah> currently suspecting it's my /etc/network/interfaces being incorrect
[12:19] <Kottalizer> Whops
[12:19] <Kottalizer> Then I can't help you, sorry.
[12:19] <Kottalizer> Have to go now anyways.
[12:19] <Micah> :/
[12:19] <Micah> was gonna ask if he could paste what his said :(
[12:21] <mavErik> hi, is there a way to reinstall ktorrent without lost the download torrent in list?
[12:21] <Micah> i believe it saves the torrents in a subfolder of it's directory. just back up that and the download location, reinstall then run each torrent
[12:22] <mavErik> when i choose a torrent i don't click on save but only on download
[12:22] <mavErik> i need only tehe list of my old torrent..
[12:22] <Micah> most torrent clients save the torrents anyway
[12:22] <mavErik> *the
[12:23] <Micah> it's how they access them again after you shutdown or close the program
[12:23] <mavErik> ok...do you know where i have to shearch?
[12:24] <Micah> can you open ktorrent at all?
[12:24] <gloopy> look in /home/.kde
[12:24] <mavErik> no, because when i used it for the last time, i've got a problem and the pc needed a restart...
[12:24] <mavErik> and now it doesn't work
[12:25] <mavErik> ok
[12:25] <Torch> mavErik: turn its debug output on in kdebugdialog and run ktorrent from a shell.
[12:25] <Torch> mavErik: pastebin the output and post the link here.
[12:25] <mavErik> ok
[12:25] <Torch> mavErik: reinstalling is not going to help anything. KDE (and linux) is not windows.
[12:26] <mavErik> i know, but it tell me that my report it's incoplete
[12:26] <Micah> well off to work with me, will probably return looking to get my wifi running :/
[12:26] <mavErik> Torch: Application: KTorrent (ktorrent), signal: Bus error
[12:26] <mavErik> [Current thread is 1 (Thread 0x7f7b1db28760 (LWP 2105))]
[12:26] <mavErik> Thread 2 (Thread 0x7f7b10364710 (LWP 2107)):
[12:26] <mavErik> #0  0x00007f7b1974dfb3 in select () at ../sysdeps/unix/syscall-template.S:82
[12:26] <mavErik> #1  0x00007f7b1d6b368e in dht::RPCServerThread::run (this=0x1905250) at ../../libbtcore/dht/rpcserver.cpp:107
[12:26] <FloodBotK2> mavErik: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[12:26] <mavErik> #2  0x00007f7b1b0cc775 in QThreadPrivate::start (arg=0x1905250) at thread/qthread_unix.cpp:248
[12:26] <Torch> ...
[12:35] <mavErik> ok, this is the URL: http://paste.ubuntu.com/441315/
[12:36] <mavErik> ^ Torch
[12:38] <adilalpman> hi
[12:39] <adilalpman> i have a problem with my 5.1 soundcard in ubuntu and in kubuntu
[12:39] <adilalpman> can anybody help me?
[12:41] <spawn> hi people
[12:41] <UDTQ> heyoo
[12:42] <spawn> wats up in the land of kubuntu
[12:42] <spawn> totally feeling 10.04
[12:42] <UDTQ> Just installed yesterday .D
[12:42] <spawn> me too
[12:42] <spawn> !
[12:42] <Torch> mavErik: this is a bug in ktorrent. please report it on bugs.kde.org
[12:42] <mavErik> ok, thanks!
[12:42] <Torch> mavErik: once you've done that we can try to find a workaround
[12:42] <UDTQ> what is a bug in Ktorrent? im tryin to dld a file, but it wont work
[12:43] <spawn> fav parts so far...
[12:43] <spawn> hmm i like the boot times
[12:43] <UDTQ> yeah!
[12:43] <UDTQ> and overall speed of the OS
[12:43] <spawn> n Qt creator
[12:43] <spawn> i know its not kubunutu
[12:43] <spawn> but still
[12:43] <spawn> also i love chrome!
[12:44] <UDTQ> I'm running firefox
[12:44] <spawn> cool
[12:44] <spawn> ohhh
[12:44] <spawn> i have to try my iphone
[12:45] <spawn> this outta be awesome if it works
[12:45] <UDTQ> huh?
[12:45] <spawn> i read it supports iphones?
[12:45] <UDTQ> might be, I wouldn't care :P
[12:45] <UDTQ> care to read about such a thing I mean.
[12:45] <adilalpman> i have install kubuntu 10.04 a few days ago but my souncard (creative SB-5.1-VX) not working as 5.1 in it
[12:45] <adilalpman> with kde
[12:45] <spawn> cause i formatted all my music which is on my ipod
[12:46] <spawn> :(
[12:46] <adilalpman> and then i uninstall kubuntu and install ubuntu 10.04
[12:46] <spawn> your in the right place to get support
[12:46] <adilalpman> and in the begining everything was perfect in ubuntu with gnome and with pulse
[12:46] <adilalpman> then
[12:46] <UDTQ> I want support aswell!But let's take adilalpman first :P
[12:46] <adilalpman> i install kubuntu-desktop on ubuntu 10.04
[12:47] <adilalpman> but this action broken everything
[12:47] <spawn> lol
[12:47] <adilalpman> now i only hear a nose
[12:47] <adilalpman> in kde and in gnome too
[12:47] <spawn> i would reformat
[12:47] <spawn> then install updates
[12:47] <spawn> then come here
[12:47] <adilalpman> spawn
[12:47] <adilalpman> u said it to me?
[12:47] <spawn> yea!
[12:47] <well_laid_lawn> spawn: not a good reply there mate
[12:48] <adilalpman> now
[12:48] <spawn> theres some guys here with C code falling out of them
[12:48] <adilalpman> i have only noise
[12:48] <adilalpman> on startup
[12:48] <adilalpman> and on shutdown
[12:48] <spawn> ohh
[12:48] <adilalpman> and while use amarok
[12:48] <spawn> wait maybe i can fix this
[12:49] <adilalpman> in kde and in gnome too
[12:49] <adilalpman> :(
[12:49] <spawn> if you click on the volume control in the bottom right corner...
[12:49] <spawn> select mixer
[12:49] <spawn> and crank PCM up to the MAX
[12:50] <spawn> that got me before
[12:50] <adilalpman> me?
[12:50] <spawn> yea!
[12:50] <adilalpman> ok
[12:50] <adilalpman> 1 min pls
[12:50] <spawn> kk
[12:52] <adilalpman> i cant see pcm
[12:52] <adilalpman> in any place
[12:52] <adilalpman> :S
[12:52] <adilalpman> i am on gnome now
[12:52] <FloodBotK2> adilalpman: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[12:53] <spawn> well go to settings... and enable it
[12:53] <adilalpman> where is it :S
[12:53] <mavErik> Torch: i've done
[12:54] <spawn> settings>configure chanels
[12:58] <spawn> see it?
[12:59] <adilalpman> http://img139.imageshack.us/img139/6172/screenel.png
[12:59] <adilalpman> pls look thete spawn
[12:59] <adilalpman> there no settings option
[12:59] <adilalpman> :S
[13:00] <spawn> this isnt kubuntu
[13:00] <spawn> :(
[13:00] <spawn> or english
[13:00] <spawn> :)
[13:00] <Benkinooby> hi
[13:00] <adilalpman> it is in ubuntu gnome
[13:00] <adilalpman> pls ask me
[13:00] <adilalpman> wihch u dont understand
[13:00] <adilalpman> cause of turkish
[13:01] <spawn> i never used gnome...
[13:02] <spawn> you should go to #ubuntu and ask
[13:02] <adilalpman> i am in there now too :)
[13:03] <spawn> ok goodluck
[13:03] <UDTQ> My turn now? :D
[13:03] <adilalpman> spawn
[13:04] <adilalpman> had a lot of help
[13:04] <adilalpman> interesting
[13:04] <adilalpman> go and find ur answer there
[13:04] <adilalpman> really too much help...
[13:04] <UDTQ> adilalpman--> noktalama olarak ENTER düğmesini kullanarak etmeyiniz. If that makes sense?
[13:04] <adilalpman> interesting
[13:06] <UDTQ> So, I am trying to download a video with Ktorrent, but it does not connect.
[13:10] <UDTQ> brb
[13:11] <UDTQ> and here i am.
[13:15] <ArGGu^^> UDTQ tracker down?
[13:17] <laura_> Hi, ich bitte um Hilfe: Bei meiner Neuinstallation (Laptop Lenovo. neu) und lucid hab ich ein Prob: cups startet nich automatisch. Manueller Start geht.
[13:18] <well_laid_lawn> !de | laura_
[13:19] <laura_> danke
[13:19] <well_laid_lawn> np :]
[13:23] <Mias> hi
[13:26] <timo_> wazzzup?
[13:39] <Torch> mavErik: bug number?
[13:51] <InvaderZim> Thunderbird Global Inbox (Smart Folders) failing. Help? See issue descibred here: http://kubuntuforums.net/forums/index.php?topic=3112164.0
[13:55] <InvaderZim> Why after my upgrade to Lucid, when I click on a HD disk Dolphin asks for a password? In 9.04 and 9.10 it didn't, it mounted automagically without tweaking fstab.
[13:57] <InvaderZim> I realized policykit was gone, but when I try to install policykit-kde from kpackagekit, it tells me it needs to remove kubuntu-desktop ???
[13:57] <apparle> Can I select webkit for konqueror
[13:58] <well_laid_lawn> !find webkit
[13:58] <well_laid_lawn> there's a qt webkit there apparle
[14:00] <apparle> well_laid_lawn:can I ask konq to use webkit
[14:00] <well_laid_lawn> apparle: I wouldn't know - never tried it...
[14:00] <apparle> well_laid_lawn: instead of KHTML
[14:00] <well_laid_lawn> it seems to be available
[14:01] <apparle> well_laid_lawn: how to configure konq to use it
[14:02] <well_laid_lawn> apparle: I wouldn't know - never tried it...
[14:03] <addri92> ai alguien que able español?
[14:04] <bazhang> !es
[14:04] <jimfan> Urr..........
[14:04] <jimfan> I would love to learn :-)
[14:10] <RiotingPacifist> konqueror opens folders in new windows, even though it is set not to
[14:15] <lerrup> hi, I can't find anything anywhere - does anyone know about kde 4.5 in Lucid?
[14:20] <well_laid_lawn> !ppa | lerrup
[14:21] <addri92> sabes canales españoles?
[14:22] <well_laid_lawn> !es
[14:22] <well_laid_lawn> addri92: ^^
[14:22] <lerrup> ubbotu: but are there any kubuntu ppas that are likely to have it - other betas have been?
[14:22] <well_laid_lawn> addri92: keep it in the channel pls :]
[14:23] <well_laid_lawn> lerrup: afaik it is not in a ppa yet
[14:25] <lerrup> well_laid_lawn: are there any plans or do we wait for beta 2?
[14:26] <well_laid_lawn> lerrup: I have no idea - it will be available in time - how long tho I don't know
[14:27] <lerrup> well_laid_lawn:thanks
[14:27] <well_laid_lawn> np :]
[14:27] <well_laid_lawn> it won't be long
[14:29] <n8w1ng> hey
[14:29] <balazsbela> Hey all.
[14:29] <balazsbela> My keyboard won't work in kde
[14:29] <balazsbela> only if I hold buttons pressed
[14:30] <well_laid_lawn> can you use the mouse to select the right keyboard?
[14:30] <n8w1ng> ive got a problem...ive got a backup of my home folder but when i override my new home folder Kpackage marks packages which have not been installed as installed
[14:31] <n8w1ng> so i was wonderin whether the home folder stores info about installed packages
[14:31] <well_laid_lawn> afaik no - but I'm not familiar with kpackage
[14:32] <Ahox> n8w1ng,  no, the package info is in /var/lib/dpkg, kpackage is just a frontend
[14:32] <Ahox> n8w1ng,  the cache might be stored somewhere in the homefolder, so a simple refresh should fix it
[14:33] <n8w1ng> Ahox: aha,how should i do the refresh...ive tried several commands but none of them worked
[14:34] <Ahox> software updates/refresh pacakges
[14:35] <n8w1ng> Ahox: aight...thx for your help
[14:58] <mooperd> hi, I've set up my atherios AR5212 wificard as an ap master but it is not allowing devices to connect to it properly. My iphone kinda works but keeps dropping the connection and my mac refuses to connect at all. The machines is running ubuntu 9.10. its using madwifi drivers and hostapd.
[15:09] <Zhenya> hi guys, having lots of trouble getting parralel monitors to work
[15:10] <Zhenya> anyone here that can lend a hand?
[15:10] <Zhenya> i'm getting "scrambled"screen
[15:11] <InvaderZim> Why after my upgrade to Lucid, when I click on a HD disk Dolphin asks for a password? In 9.04 and 9.10 it didn't, it mounted automagically without tweaking fstab. I realized policykit was gone, but when I try to install policykit-kde from kpackagekit, it tells me it needs to remove kubuntu-desktop ???
[15:11] <well_laid_lawn> Zhenya: this might give a clue - http://wiki.debian.org/XStrikeForce/HowToRandR12
[15:12] <bazhang> InvaderZim, its safe to remove just a metapackage
[15:12] <Zhenya> well_laid_lawn: thank you, checking it out
[15:12] <well_laid_lawn> InvaderZim: it might help if you mention how the hdd is being made available to kubuntu
[15:12] <persepolis> hi
[15:12] <InvaderZim> bazhang: it also wants to remove kde-workspace
[15:12] <persepolis> can i have some help please, what programs can i use to scan with
[15:13] <bazhang> !xsane
[15:13] <InvaderZim> bazhang: and other kde bases
[15:13] <InvaderZim> well_laid_lawn: trough ide? internal hd
[15:14] <well_laid_lawn> InvaderZim: is it a ntfs partition or...
[15:14] <InvaderZim> well_laid_lawn: one ntfs, other is fat32
[15:14] <InvaderZim> well_laid_lawn: in another computer both are ntfs
[15:14] <InvaderZim> oh I see, yes both are non native
[15:15] <well_laid_lawn> InvaderZim: the other comps hdds are through samba?
[15:15] <InvaderZim> well_laid_lawn: no, no samba... I mean, its the same problem,  different pc, dolphin asks for password on it
[15:17] <well_laid_lawn> InvaderZim: that gives the channel more info :] - I don't do anything windows related here so maybe someone with experience will respond
[15:17] <Zhenya> well_laid_lawn: I've looked over that page, but i'm pretty much a noob and have NO idea what to do :(
[15:18] <n8w> hey
[15:18] <well_laid_lawn> Zhenya: I don't use dual monitors - that link is the extent of my knowledge sorry
[15:18] <n8w> can i get this update eventhough i dont use 10.4: http://www.kubuntu.org/news/kde-sc-4.4.3
[15:18] <n8w> ?
[15:18] <Zhenya> well_laid_lawn: gotcha...thanks!
[15:19] <well_laid_lawn> !ppa | n8w
[15:19] <n8w> well_laid_lawn:  ye but it says "users of 10.4"
[15:20] <n8w> well_laid_lawn:  thats why im wonderin whether i can use it...otherwise i know how to use ppa
[15:22] <well_laid_lawn> o
[15:22] <well_laid_lawn> !backports
[15:22] <InvaderZim> Please HELP anyone? Fresh Lucid Install login fails. See here for details: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-savage/+bug/584674
[15:22] <well_laid_lawn> apart from that...
[15:26] <Zhenya> well_laid_lawn: can't get the monitors to work i'll come bother peoploe a little later, but another quick question. Sometimes my other partition doesnt mount, how can i refresh it?
[15:27] <well_laid_lawn> Zhenya: if it is in the file /etc/fstab then sudo mount -av might work
[15:28] <Zhenya> mount: proc already mounted on /proc
[15:28] <Zhenya> nothing was mounted
[15:28] <InvaderZim> Why does a fresh clean Lucid install of (K)/Ubuntu STILL can't mount FAT32 partitions recognizing international latin characters?
[15:30] <Zhenya> well_laid_lawn: i had to mount it through dolphn
[15:30] <Zhenya> had to click on it, enter my sudo password and then i can see it in the other applicationj
[15:32] <well_laid_lawn> Zhenya: check the fstab file for an entry for it pls
[15:51] <n8w> ive updated to the latest kde but after the reboot kde loads up with this error: Executable: kdeinit4 PID: 1783 Signal: 11 (Segmentation fault)
[15:56] <solifugus> So is anyone working on making kubuntu at least install properly in virtualbox?
[15:56] <solifugus> I'm using sidux now...
[15:56] <well_laid_lawn> solifugus: there is #vbox for that :]
[15:57] <solifugus> well_laid_lawn: seriously.. it's a kubuntu issue, though
[15:57] <well_laid_lawn> solifugus: in vbox? - don't think so
[15:57] <solifugus> would you say it's an hp issue because I use an hp computer?
[15:57] <solifugus> of course it's a kubuntu issue
[15:58] <well_laid_lawn> solifugus: ask in your distos channel first
[15:58] <well_laid_lawn> distros*
[15:58] <solifugus> distro's
[15:58] <solifugus> like this one for kubuntu
[15:58] <well_laid_lawn> distros'
[16:00] <tsimpson> solifugus: if it fails in vbox but on in real hardware, it's a vbox issue
[16:01] <tsimpson> *but works on real hardware
[16:01] <tsimpson> it's up to vbox to emulate the hardware layer, not Kubuntu
[16:01] <solifugus> tsimpson: every hardware platform differs... vbox is no different.
[16:02] <solifugus> it works on some hardware and not others... but vbox is open source and pretty stable in what it has.. and heavily used.  So..
[16:02] <well_laid_lawn> and it could be your distos' implementation of vbox that is the issue solifugus ]
[16:02] <solifugus> well_laid_lawn: I install sun's version.. not ose
[16:02] <well_laid_lawn> solifugus: then ask in #vbox mate :]
[16:02] <tsimpson> as far as the OS is concerned it's being installed on real hardware, if this causes issues it's not the OS's fault
[16:02] <solifugus> and.. unlikely, anway.. package maintainers don't normal make the kinds of changes that would make a vm not work.
[16:03] <solifugus> well_laid_lawn: I can ask in there (and maybe somebody has played with it) but really.. if you can make something work on a variety of miscellaneous hardware.. making it work in a heavily used vm environment should  be so much easier.. it's not a vbox issue.
[16:03] <tsimpson> if you have specific information for why it fails you should file bugs
[16:04] <solifugus> but the attitude that it is, doesn't bode well for kubuntu
[16:04] <solifugus> not if its kubuntu maintainers' attitude
[16:04] <solifugus> which i really hope it isn't
[16:04] <well_laid_lawn> solifugus: you've been told - don't mention me again pls
[16:04] <tsimpson> if it's a bug in Linux, then someone in the kernel team can fix it. but if it's a bug in vbox someone in vbox needs to fix it
[16:05] <solifugus> are you two kubuntu maintianers?
[16:05] <well_laid_lawn> I am only one person...
[16:06] <tsimpson> it depends exactly what you mean by "kubuntu maintainer"
[16:06] <tsimpson> Kubuntu is many parts
[16:06] <solifugus> installer seems to be the problem..
[16:06] <tsimpson> what exactly is the issue?
[16:06] <well_laid_lawn> did you do the md5 on the iso?
[16:07] <solifugus> middle of install, get a black screen and everything seems to stop indefinitely
[16:08] <spawn> hi everyone... how do you get an iphone to work with kubuntu 10.04? i mean i plugged it in and nothing? i thought i was ment to work?
[16:08] <well_laid_lawn> !iphone
[16:08] <solifugus> spawn: it used to work great with my old iphone.. you must have the newer version?
[16:09] <spawn> iphone 3g only
[16:09] <spawn> already read the how to... says plug it in and it should be in places!
[16:10] <well_laid_lawn> heh - the link is not kde freindly then
[16:10] <solifugus> spawn: I thought I heard from someone that apple's been locking it down..  I don't know if that's true because I recently got rid of my iphone.. (need something more reliable as a phone--way too many dropped calls and people calling me and going straight to voice mail when I was available)
[16:10] <spawn> yeah? i am due to get a new phone... maybe ill just not bother
[16:10] <spawn> lo
[16:10] <tsimpson> solifugus: search for virtualbox on https://edge.launchpad.net/ubuntu/+source/ubiquity
[16:11] <solifugus> I don't know for sure about apple locking it down like that.. I just heard someone say that.
[16:11] <tsimpson> * https://bugs.launchpad.net/ubuntu/+source/ubiquity
[16:11] <well_laid_lawn> tsimpson: he uses sidux...
[16:12] <tsimpson> the Kubuntu the developers have little to do with ubiquity internals, only the GUI for it
[16:13] <solifugus> tsimpson: thanks... i will take a deeper look at that.
[16:14] <solifugus> well_laid_lawn: I'd like to use kubuntu.. been waiting for it to work well on my laptop..  I can't get wireless with it, even though my network card has kernel support built-in, in recent versions...  Sidux's kde 4 is very well refined.. works much better than last time I saw kubuntu's.
[16:14] <solifugus> but I need unbuntu packages that aren't available on sidux.. particularly panda3d
[16:15] <solifugus> it's dependencies are too much to do all by hand on debian
[16:15] <well_laid_lawn> good luck :]
[16:16] <warriorheart> hello guys
[16:19] <InvaderZim> Help! https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/587268
[16:36] <InvaderZim> Everytime a GTK program tries to open the GTK 'select file to open' window, it takes like 30 seconds! How can I stop this?
[16:39] <BluesKaj> InvaderZim, are you running gnome or kde < or both ?
[16:39] <InvaderZim> KDE
[16:39] <InvaderZim> I don't have gnome installed
[16:39] <InvaderZim> BluesKaj: but obviously I have gtk libraries
[16:39] <well_laid_lawn> loading gtk libs does take some time
[16:40] <InvaderZim> no but it wasnt like this
[16:40] <InvaderZim> it started happening some weeks ago
[16:40] <InvaderZim> the programs stops responding
[16:40] <InvaderZim> until the window finally opens
[16:40] <InvaderZim> and I just can't even know if there is a log to look for this
[16:42] <BluesKaj> right, InvaderZim,  I haven't seen that issue with synaptic or other gtk apps but I have probs with etc/default grub not opening prperly i kate ...very strange
[16:42] <BluesKaj> in kate
[16:43] <InvaderZim> in a much slower pc with kubuntu lucid, gtk window "select file" opens almost instantly
[16:43] <BluesKaj> kde ibus-daemon wth grub seems to be my prob
[16:43] <InvaderZim> some app here messed up
[16:44] <BluesKaj> which apps in particular?
[16:45] <InvaderZim> I don't know
[16:45] <InvaderZim> I mean, some app must have messed up this gtk delay
[16:46] <BluesKaj> InvaderZim, check your system monitor to see if something eating cpu
[16:46] <InvaderZim> hmmmm
[16:46] <InvaderZim> oh
[16:46] <InvaderZim> werid is
[16:46] <InvaderZim> weird is... after the first delay
[16:46] <InvaderZim> subsequent open dialogs dont have the delay
[16:49] <InvaderZim> until after some time I assume without opening them... the delay comes back
[16:49] <cuznt> i have kde4.4.x installed side by side w/ ubuntu. i can get into ubuntu through the rescue mode but the log in screen to choose wont pop up. i get a nvudua error and x will not start
[16:59] <j800r> hey guys, i have a problem. just upgraded to 10.04 and no new official repositories were added, only the old 9.10 ones remained. what do i need to add? :\
[16:59] <well_laid_lawn> cuznt: http://www.ubuntugeek.com/howto-install-nvidia-drivers-manually-on-ubuntu-10-04-lucid-lynx.html
[17:01] <well_laid_lawn> j800r: in konsole try   sudo apt-get update && sudo apt-get upgrade && sudo apt-get dist-upgrade
[17:02] <j800r> i already upgraded. just didn't add any new repositories :\
[17:02] <well_laid_lawn> j800r: that command will try to pull in any missing stuff
[17:02] <j800r> ah, ok.
[17:03] <well_laid_lawn> j800r: all three steps are important :]
[17:04] <Torch> well_laid_lawn: dist-upgrade include upgrade, so you can leave the latter out
[17:05] <j800r> i think that might've worked. i got a launchpad ppa in other software :\
[17:06] <BluesKaj> j800r, this command will update your sources.list , sudo sed -i 's/karmic/lucid/' /etc/apt/sources.list
[17:07] <BluesKaj> j800r, any non default repos like ppas won't be updated afaik
[17:07] <j800r> yup, that seems fine now. tnx
[17:08] <BluesKaj> yard work to do ....BBL
[17:08] <j800r> i think the ppa was one i added while i was experimenting, lol
[17:30] <InvaderZim> Is devicekit installed by default on Lucid?
[17:31] <well_laid_lawn> !find devicekit
[17:31] <well_laid_lawn> !info devicekit
[17:37] <j800r> ugh..i wish Gwibber worked in kde. that's the only thing i miss with Kubuntu :|
[17:45] <bulldog98> j800r: tryed choqok?
[17:46] <j800r> ya, it don't support facebook though :|
[17:46] <j800r> well..no directly, anyway
[17:46] <j800r> *not
[17:48] <BluesKaj> hmmm, wonder why /etc/default/grub/ won't open in kate with kdesudo. It opens to a blank  text file , yet if I just open /etc/default/grub without kdesudo , kate opens in full text..all other text files with kdesudo in the run command / krunner open just fine.
[17:53] <DarthFrog> BluesKaj: It works for me, using kdesu, not kdesudo.
[17:59] <InvaderZim> Is Lucid network manager working with hidden wlans?
[18:00] <BluesKaj> DarthFrog, no luck with kdesu
[18:01] <DarthFrog> BluesKaj: Strange.  What about sudo from the command line?
[18:01] <BluesKaj> it will open if I put dolphin in the path
[18:01] <BluesKaj> no i get the daemon bus error in the cli
[18:02] <DarthFrog> Well, there's the problem
[18:04] <BluesKaj> yeah, strange ...failed to add paths: /root/.config/ibus/bus ,then, Bus::open: Can not get ibus-daemon's address and finally, IBusInputContext::createInputContext: no connection to ibus-daemon
[18:09] <InvaderZim> Does the Kubuntu Lucid installer resizes a NTFS partition non-destructively?
[18:15] <BluesKaj> InvaderZim, best to defrag the ntfs first before the installer resizes it
[18:15] <BluesKaj> if you decide to resize
[18:22] <InvaderZim> BluesKaj: hmmm... I just saw that I can't resize it from the installer partitioner
[18:25] <BluesKaj> InvaderZim, what's the message ?
[18:26] <BluesKaj> that's strange
[18:31] <BluesKaj> InvaderZim, I usually use gparted-live-cd to edit partitions before installing , hence one can just choose the manual partioning option when installing kubuntu
[18:33] <shadeslayer> BluesKaj: btw does the kubuntu installer provide for partitioning of GPT partitioned hard drives?
[18:33] <shadeslayer> um.. i mean GPT partition table
[19:00] <InvaderZim> BluesKaj: but manal partitioning doesnt allow resizing
[19:00] <InvaderZim> s/manal/manual/
[19:10] <RaGNORAK> does anyone know a good ipod video converter ?
[19:13] <n8w> hey
[19:13] <shadeslayer> !ipod | RaGNORAK
[19:14] <RaGNORAK> oh thanks
[19:14] <n8w> i cant suddenly mount my win drives,it says only root can mount...
[19:14] <shadeslayer> RaGNORAK: np
[19:14] <shadeslayer> !ntfs-config | n8w
[19:14] <shadeslayer> hmm..
[19:15] <shadeslayer> n8w: install ntfs-config
[19:15] <n8w> shadeslayer:  but it was workin ok until i created another user
[19:15] <shadeslayer> n8w: ah!
[19:15] <shadeslayer> n8w: so have you added that user to admin group?
[19:16] <shadeslayer> becaus only admin group has root access.. and you need root access to mount ntfs drives
[19:16] <n8w> shadeslayer:  i think ive done smth wrong,coz ive added myself(my username) to additional groups
[19:16] <shadeslayer> ( all drives are mounted at /media/ which requires root access )
[19:16] <shadeslayer> n8w: just check if you are in the admin group....
[19:17] <n8w> shadeslayer:  ye i know, but my username is in admin group...shall i check also "roor" group
[19:17] <shadeslayer> n8w: yeah
[19:17] <shadeslayer> n8w: anyways ive gtg,but it does look like a group issue
[19:18] <n8w> shadeslayer:  ye it is:)) thx for help
[19:31] <n8w> ive got a problem with permissions...ive accidentally added myusername to several different groups n since then, i cant mount win drivers(it says: only root can do that)
[19:32] <n8w> my username is in the following groups: root,adm,admin,cdrom,
[19:33] <j800r> anyone use choqok an know why i can't get it to connect to twitter? :\
[19:34] <shadeslayer> j800r: which choqok version?
[19:34] <n8w> anyone
[19:34] <n8w> ?
[19:34] <shadeslayer> n8w: you might also want to try #kubuntu
[19:34] <shadeslayer> um
[19:34] <shadeslayer> #ubuntu
[19:35]  * shadeslayer checks choqok version in his ppa
[19:35] <n8w> ye im there as well
[19:35] <j800r> shadeslayer: 1.0 Beta1
[19:35] <j800r> came from the repos
[19:35] <shadeslayer> j800r: hmm.. well do you have the https check box ticked?
[19:36] <j800r> i've tried with it checked and unchecked
[19:36] <soee> any info when we can expect kde 4.5b1 in kubunru repos ?
[19:37] <j800r> i tried using both my username and email address as username too. nothing seems to work :\ tester the twitter site and the server is up :\
[19:38] <shadeslayer> j800r: well you just need to put your username,not your email address...
[19:38] <j800r> i've tried both meaning username/password and email/password
[19:38] <j800r> neither combinations worked
[19:40] <soee> where in Krusader can i find windows partitions ?
[19:44] <BluesKaj> soee, in places on the left panel
[19:44] <BluesKaj> but I would use dolphin
[19:45] <soee> BluesKaj: im using both but before i can access windows partition, i have to typein password so in Krusader i have access only to those partition witch i opend first in Dolphin with password
[19:46] <BluesKaj> soee, why are you using krusader?
[19:47] <soee> BluesKaj:  im used to Total Commander from Win so i want some similiar app here
[19:47] <BluesKaj> dolphin provides access to ntfs partitions ...there'sno need to use krusader\
[19:47] <e01_> hello
[19:47] <BluesKaj> it's redundant
[19:48] <e01_> i had a problems with my usb card reader, when i plug in , and put the card, there nothing triggers
[19:50] <ch3mtail> I've just disabled the ssh server and samba (nmbd & smbd) services - initially by sysv-rc-conf and then (realizing it made no difference) removing the symlinks from the /etc/rcN.d directories.  They're still loading on boot, what the hell am I missing?
[19:52] <ch3mtail> The third time around I even went and removed the respective links from every /etc/rcN.d directory just to be sure I hadn't stumbled on the runlevels, but they're still acting like nothing ever changed.
[19:55] <BluesKaj> ch3mtail, remove them from /etc/rc*d
[20:00] <ch3mtail> Like I said, I already did.
[20:02] <ch3mtail> Actually I said "/etc/rcN.d", but I did mean to say that they now reside in no /etc/rc* folder whatsoever.
[20:07] <BluesKaj> ch3mtail, remove smbclient and samba
[20:09] <ch3mtail> I need those.  It would be a too brutal solution for my taste anyhow.
[20:09] <bmw> Question: Dist-upgrade from Karmic to Lucid on Dell D600 laptop; fails to install libplasmagenericshell4.4.2. Thoughts?
[20:14] <bmw> Question: Dist-upgrade from Karmic to Lucid on Dell D600 laptop; fails to install libplasmagenericshell4.4.2. Thoughts?
[20:15] <djustice> feep. testing my irc client. someone djustice: me
[20:15] <DarthFrog> My thought is that I'm seeing your question in stereo.
[20:16] <bmw> DF, so do you have an answer for me, for me?
[20:16] <DarthFrog> No, twice no. :-)
[20:23] <bmw> #quit
[20:38] <slow-motion> hi
[20:39] <BluesKaj> hi slow-motion
[20:40] <slow-motion> hi BluesKaj
[20:46] <BluesKaj> hmm, was busy here  , but now it's dead again
[20:52] <haxor> test
[21:01] <afaglia> quit
[21:01] <Nythain> kubuntu 10.04, k3b = no optical devices found... wodim --devices doesnt show anything... lshw clearly shows it though, any clues?
[21:04] <apecross> hi people first time here
[21:04] <apecross> a question about wlan
[21:05] <apecross> from syslog: "NetworkManager: <info>  (wlan0): deactivating device (reason: 2)"
[21:08] <n8w> guys do u know where i could find the repo for kde 4.4.1?
[21:15] <onlooker> Can someone help me with something? I have mplayer on the system, but it works only if I run it with /usr/bin/mplayer. Just saying mplayer gives me this error: "bash: /usr/local/bin/mplayer: No such file or directory"
[21:28] <daniel> olá
[21:28] <daniel> algum brasileiro aqui?
[21:31] <onlooker> Anyone?
[21:32] <Nythain> good luck, trying to get help in here is like trying to read stereo instructions in russian
[21:32] <Nythain> but judging by your problem, it would appear that your $PATH environment variable isnt including /usr/bin... as for setting/changing that, cant help ya
[21:34] <Nythain> /etc/environment
[21:35] <Nythain> thats where PATH is set aparently
[21:35] <dhq> anyone used to use gkrellm
[21:39] <Nythain> onlooker: after adding /usr/bin to the $PATH if its not already there, you will more than likely have to completely log out and back in for the change to take effect, but i could be wrong
[21:41] <onlooker> Nythain: Thanks, I'll try it now
[21:46] <onlooker> Nythain: I think I fixed it. /usr/bin wasn't listed at the beginning in /etc/environment so I put it there. Thanks for the help!
[21:50] <Nythain> onlooker: no problem, at least someone got some help :P
[21:51] <Nythain> you wouldnt happen to be a guru at dvdrw devices, dbus, hal, and well, getting kubuntu and or wodim to like them would  ya?
[21:51] <do0ob> hi
[21:52] <do0ob> anyone here using kde4 on a GMA950 graphics card?
[21:52] <do0ob> can yo use any effects?
[21:53] <dhq> do0ob: what system monitor you use
[21:55] <do0ob> dhq: system monitor? i use nvtemp and sensors
[21:55] <do0ob> and df -h
[21:55] <do0ob> the progress bar dolphin also helps
[21:58] <onlooker> Nythain: Sorry, man. No such luck
[22:19] <Nythain> well, once agian, for future reference, if anyone else has a similar k3b/wodim problem... rebooting with a DVD in the drive appears to fix it, for whatever effed up reason
[22:26] <reda> hello people
[22:27] <reda> need some help if you have time for new user
[22:27] <reda> i downloaded theme from hde look
[22:27] <reda> but i dont know how to install theme
[22:28] <reda> http://kde-look.org/index.php?xcontentmode=8x9x10x11x12x13x14x15x16
[22:29] <reda> it say compil or something like that
[22:29] <reda> are there some one can show me the way ???
[22:30] <reda> ok thank you for nothing
[22:31] <reda> bye
[22:38] <david_> no!
[22:45] <Micah> i had a bit of a mishap and need to get grub  off my system and go back to the windows 7 boot loader, how do i do this?
[22:45] <Micah> it will either have to be via windows or live disk
[22:46] <InvaderZim> With a 2 gb ram system, do we still need a swap partition for a desktop?
[22:49] <Micah> always need a swap partition if i
[22:49] <Micah> 'm not mistaken
[22:49] <Micah> ...
[22:49] <Micah> stupid enter key
[22:49] <FloodBotK2> Micah: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[22:50]  * Micah bows in apology to FloodBotK2
[22:59] <casperii> hola
[23:00] <casperii> hola no hay nadie?
[23:01] <Micah> !es | casperii
[23:01] <casperii> hola
[23:02] <draik> Hey all.
[23:02] <draik> I'm trying to setup a stream from my server to my desktop, netbook, laptops, etc.
[23:02] <draik> This is all within my own home server
[23:03] <draik> My question is this: How do I auto-mount a DVD ISO of my choosing to stream it to a client?
[23:34] <InvaderZim> Please HELP anyone? Fresh Lucid Install login fails at KDM. See here for details: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-savage/+bug/584674
[23:37] <JontheEchidna> InvaderZim: not much to do except wait for the authors of the graphics driver fix the bug
[23:37] <InvaderZim> JontheEchidna: I see... bummer
[23:37] <JontheEchidna> :( yeah
[23:40] <n8w> how can i downgrade kopete?
[23:41] <n8w> ive upgraded my kde to 4.4.2 n since then kopete wont even start...it crashes with Executable: kopete PID: 16144 Signal: 11 (Segmentation fault)
[23:57] <slow-motion> n8
[23:59] <fmi> Hello! I don't know if this is the right place to ask this question, but whatever. Sorry if it isn't. I'm unable to connect to the 'net in Kubuntu. It was working fine, and now it isn't (duh, if it were, I wouldn't be asking this quesiton now, hehe)... but whatever. I'm using the mac at the moment (same connexion, same modem). It's a cable connexion. I'm running 10.04 lucid.