[00:01] <odhinn> not that I'm aware of
[00:01] <zus> my pannel is all messed up how can i fix my default pannel? the cloc is streched and everything is scrunched in the left cornner
[00:02] <odhinn> RadSurfer: can you do "lspci" from a console and paste the results on the paste.ubuntu.com for me?
[00:03] <odhinn> that's without the quotes, of course
[00:04] <RadSurfer> I'm trying to run audacity, seems it likes to reboot when its trying to do too much w/audacity running :( I was expecting better.
[00:07] <zus> how can i restore the default pannel?
[00:07] <zus> i cant even drag the clock to a normal size
[00:07] <RadSurfer> lspci -->  nVidia NV5M64 RivaTNT2 Model 64 Rev 15 <--- lspci
[00:07] <odhinn> ok...
[00:07] <RadSurfer> Also, this system only has 512mb RAM, is that enuff?
[00:14] <RadSurfer> So does anyone understand why rebooting looses my Display resolution settings?
[00:17] <odhinn> zus: Best I could find was  http://ubuntuforums.org/showthread.php?t=1469243&page=1
[00:18] <odhinn> RadSurfer: take a look at this and see if it helps at all
[00:18] <odhinn> http://ubuntuforums.org/archive/index.php/t-390979.html
[00:19] <zus> odhinn,  thank you
[00:19] <odhinn> zus: np, hope it helps
[00:19] <RadSurfer> Manually tweaking xorg.conf ? why didn't I think of that!
[00:20] <RadSurfer> "nvidia-settings didn't save your settings because you should have launched it with "sudo"; sudo nvidia-settings"
[00:20] <RadSurfer> I take it that was for nVidia specific driver interface
[00:20] <odhinn> that's what I was referring to
[00:20] <zus> odhinn,  kinda, after stepping away for a minute, it dawned on me i have ff open and it wasnt in the tray....
[00:20] <odhinn> ahh
[00:21] <odhinn> that would make sense, zus
[00:21] <odhinn> Hey, I'm just trying to help since no one else is...
[00:23] <RadSurfer> What is the Display configuration application name in kubuntu? I'll try running it as sudo... that was it has permissions to save settings!
[00:28] <odhinn> Don't know, RadSurfer, can't find it either
[00:30] <odhinn> did find this tho: https://wiki.kubuntu.org/X/Config/Resolution
[00:34] <RadSurfer> "Note that changes you make using xrandr only last through the current session."
[00:36] <odhinn> sorry, didn't notice that, I'm tapped out
[00:36] <Scunizi> Is there a default app in 10.04 for doing RDP or VNC connections?
[01:23] <Scunizi> KRDC is the answer for anyone looking
[01:27] <RadSurfer2> Ok. I'm official on my newly install Kubuntu 10.4 now
[01:28] <RadSurfer2> What was that special command for fetching gcc build-essentials again?
[01:30] <BluesKaj> sudo aptitude install build-essential
[01:35] <RadSurfer2> 15 pkgs to install 3 to update "fakeroot" looks suspicious! hehe
[01:36] <Typos_King> ..
[01:36] <Typos_King> if it ain't broken, why fix it?
[01:36] <RadSurfer2> gcc is required for a varity of reasons.
[01:37] <RadSurfer2> DOES anyone know why kubuntu is not SAVING my display resolution settings?
[01:37] <RadSurfer2> I tried gsku krandtray, but that doesn't work either
[01:38] <RadSurfer2> it accepts I have the modes; you'd think it would SAVE them!
[01:39] <Typos_King> gcc,, kubuntu already has it
[01:40] <Typos_King> RadSurfer2:    I assume you will need to edit xorg.conf
[01:40] <RadSurfer2> then why does it say 15 pkgs needed!
[01:40] <Typos_King> for the gcc installation?
[01:40] <RadSurfer2> gcc is not necessarily a proper build environment; its just bare-essentials
[01:41] <RadSurfer2> gcc alone that is. that are automation tools, etc
[01:41] <Typos_King> .. well
[01:41] <Typos_King> if it says it needs it, then do so :P
[01:42] <RadSurfer2> kubuntu has some similarity with Sidux...fortunately. I wonder how far that similarity goes :-)
[01:42] <RadSurfer2> Sidux is a bit harder to install though
[02:08] <RadSurfer2> IS THERE a way to find out if this motherboard is 32 or 64 bit? That would be a useful terminal command to keep handy :)
[02:08] <vegeta> http://mashpotatoe.mybrute.com
[02:09] <well_laid_lawn> vegeta: pls don't post links without a comment mate
[02:11] <RadSurfer2> I know there has to be some way to get CPU info!
[02:12] <well_laid_lawn> RadSurfer: it is not the mobo that determines that but the cpu
[02:12] <well_laid_lawn> RadSurfer2: it is not the mobo that determines that but the cpu
[02:12] <RadSurfer2> A mb not optimized for 64-bit cpu just dropped in? oh dear me.
[02:12] <RadSurfer2> still, there must be a way to query about da CPU
[02:14] <well_laid_lawn> RadSurfer2: if you don't have more than 4gb mem and don't do math intensive computations then 64bit isn't necessary atm imo
[02:14] <well_laid_lawn> try   sudo lshw
[02:15] <vegeta> ok
[02:15] <vegeta> http://mashpotatoe.mybrute.com i need some pupils please
[02:16] <RadSurfer2> that dumped a lot of info :-)
[02:16] <well_laid_lawn> pupils?
[02:16] <vegeta> just look at the web site and youll see
[02:17] <well_laid_lawn> RadSurfer2: from that you can google the mobo, cpu etc to find the capabilities thety have
[02:20] <RadSurfer2> it reports 32-bits, which is what I wanted to confirm.
[02:20] <well_laid_lawn> k :]
[02:20] <RadSurfer2> right now my only issue is getting this clunker to remember my display screen resolution!
[02:21] <well_laid_lawn> the 32bit/64 bit thing is more mem related then anything else atm afaik
[02:21] <RadSurfer2> kubuntu doesn't want to "lock" the screen res between boots.
[02:21] <RadSurfer2> How well would kubuntu 32-bit run on a 64-bit system?
[02:21] <well_laid_lawn> using nvidia?
[02:21] <RadSurfer2> yup TNT2 evidently
[02:21] <well_laid_lawn> just fine
[02:22] <well_laid_lawn> that's an old card
[02:22] <well_laid_lawn> do you have an xorg.conf?
[02:26] <bukayoo> RadSurfer2: if you have 64-bit hw run 64-bit os
[02:26] <well_laid_lawn> "<RadSurfer2> it reports 32-bits, which is what I wanted to confirm."
[02:27] <RadSurfer2> /etc/xorg ?
[02:27] <well_laid_lawn> /etc/X11/xorg.conf
[02:27] <RadSurfer2> right
[02:27] <well_laid_lawn> :]
[02:36] <Walzmyn> I just tried to use my apache server for the first time since upgradeing to 10.04 and it's not parsing php files - just tries to let me download them - what do I need to do to fix this?
[02:37] <RadSurfer2> verify php proper is installed?
[02:37] <well_laid_lawn> Walzmyn: there is #php
[02:38] <well_laid_lawn> or   dpkg -l | grep php
[02:38] <Walzmyn> well_laid_lawn: yeah, but 1) there's never anybody there, 2) I'll bet this is a ubuntu specific thing
[02:38] <RadSurfer2> also, do a visual inspection of the apache config file
[02:38] <RadSurfer2> make sure all is coshure in there
[02:39] <RadSurfer2> I know in certain other distro's, it seems to work right out of da box (apache/php/etc)
[02:39] <RadSurfer2> doesn't ubuntu actually have a "server edition"?
[02:39] <well_laid_lawn> in the ubuntus there's
[02:40] <well_laid_lawn> !lamp
[02:40] <Walzmyn> RadSurfer2: it's always worked out of the box for me, it's just goofed since the upgarde
[02:40] <RadSurfer2> Okie.
[02:40] <Walzmyn> RadSurfer2: and I wouldn't know what I was looking at in the apache config file
[02:40] <RadSurfer2> Playing with a brand new install here tonight.
[02:40] <well_laid_lawn> Walzmyn: sometimes the upgrades do miss some stuff
[02:40]  * Walzmyn nods
[02:40] <RadSurfer2> It pays to learn about that apache config file.
[02:41] <Walzmyn> like that ugly purple startup screen i'm stuck with?
[02:41] <well_laid_lawn> try   sudo apt-get update && sudo apt-get upgrade &7 sudo apt-get dist-upgrade
[02:41] <Walzmyn> RadSurfer2: it might, but all I want is a testbed for wordpress and the like. Someone else is going to run the real one online
[02:41] <well_laid_lawn> try   sudo apt-get update && sudo apt-get upgrade && sudo apt-get dist-upgrade
[02:41] <Walzmyn> well_laid_lawn: yeah, I'm fully updated
[02:42] <RadSurfer2> Uhmmm.......
[02:42] <RadSurfer2> shouldn't one be at da proper run level for doing dist-upgradE?
[02:42] <RadSurfer2> doing an upgrade in "normal" run level was never recommended
[02:42] <well_laid_lawn> Walzmyn: tose three commands in order will bring in any packeges missed during the os upgrade
[02:43] <well_laid_lawn> which sounds like the issue here
[02:43] <Walzmyn> well_laid_lawn: I've checked, I'm fully updated
[02:44] <well_laid_lawn> Walzmyn: it is your system...
[02:44] <Walzmyn> I bet it's whatever line in apache.conf tells it to send php files to the php engine instead of the browser
[02:44] <Walzmyn> I *SO* do not wanna play with that conf file
[02:45] <well_laid_lawn> if you didn't change that file it should still work unless...
[02:46] <Walzmyn> I don't remember if i told it to keep mine or use the maintainer's - and there's no mention of php in it
[02:47] <well_laid_lawn> Walzmyn: time to take it to #php
[02:47] <Walzmyn> #php is locked, looks like a bot hit. I'ma google it
[02:48] <well_laid_lawn> you need to be registered
[02:48] <well_laid_lawn> it is always a struggle with illiterate people
[02:54] <b3ny0-> up
[02:54] <tau> hello, i am using kubuntu, when i set the screen resolution in Kmenu -> Application -> Screem resize & contate it works, but when i turn off and i turn on it doesn't work anymore, it retrieves the old settings.
[02:55] <well_laid_lawn> tau: it seems you need a xorg.conf file to set your preferred res on boot as it is done from scratch each boot now
[02:56] <RadSurfer> SAME problem I am having :-)
[02:57] <tau> well_laid_lawn:  humm, what is the natural xorg.conf's directory ?
[02:57] <well_laid_lawn> read the log file for X - /var/log/Xorg.0.log
[02:57] <tau> well_laid_lawn:  sure, so, i copy it from there and do i put ?
[02:57] <well_laid_lawn> tau: you need to make one - /etc/X11/xorg.conf
[02:58] <tau> well_laid_lawn:  sure, thank u.
[02:58] <well_laid_lawn> tau: the log will tell why it is using the res it is
[02:58] <well_laid_lawn> don't copy the log to that file tau
[02:59] <tau> well_laid_lawn:  i tried sudo gedit /var/log/Xorg.0.log
[03:00] <tau> well_laid_lawn:  well, i am new in linux, i don't know what to do either.
[03:00] <RadSurfer> if you did not know, you can keep a "root user shell" open by using --->  sudo -i
[03:01] <RadSurfer> this creates an interactive shell with root priviledges, long enough for you to do stuff. just type 'exit' to exit.
[03:01] <RadSurfer> sure easier than sudo-ing each statement!
[03:01] <well_laid_lawn> tau: k - what is the vid card pls - I'll google for an xorg.conf for you - lspci | grep VGA   in konsole will tell
[03:01] <tau> sure, well_laid_lawn  thak you very much.
[03:01] <well_laid_lawn> np :]
[03:02] <tau> well_laid_lawn: 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
[03:02] <well_laid_lawn> k - one min
[03:02] <tau> well_laid_lawn:  that's what i found.
[03:10] <well_laid_lawn> tau: http://kharkoma.homelinux.com/blog/?q=node/view/454 - copy the sections in the boxes to a file in your home dir called    xorg.conf   then in konsole do   sudo mv -v ./xorg.conf /etc/X11/xorg.conf   and then logout and login
[03:11] <well_laid_lawn> that will get you 1280x1024 res
[03:12] <tau> well_laid_lawn:  thank u , i am grateful :)
[03:12] <well_laid_lawn> np :]
[03:13] <jorge> hello
[03:14] <jorge> i need some one help  me
[03:14] <jorge> please
[03:15] <jorge> thank u
[03:15] <jorge> i fix
[03:16] <well_laid_lawn> jorge: best to just tell the issue you have and wait to see if someone knows about it
[03:27] <tau> well_laid_lawn:  it didn't work, but thank u
[03:27] <tau> well_laid_lawn:  hey, what is the tool's name that kubuntu uses to set up the resolution ?
[03:40] <RadSurfer2> where are the useless "Screen saver" settings again?
[03:40] <RadSurfer2> I wish someone would realize turning OFF the monitor by default is a STUPID idea!
[03:43] <RadSurfer2> useless screen-saver is set to off, but natually monitor still blanks out. not even kubuntu fixes this problem.
[04:09] <cpatrick08>  /msg NickServ identify <bama2008>
[04:14] <cpatrick08_> FloodBotK1: i forgot my password can you email it to me
[04:16] <tau> hey, where can I see what changes happened when i ran any program ? for exame if i was setting a new configuration for a program it changed some files on hd so how can I see what the files are altered ?
[04:16] <tau> example*
[04:21] <cpatrick2008_> who has tried kubuntu 10.10 alpha 1 yet
[04:35] <bronlar> hi all
[04:36] <bronlar> got most of my multi-boot working now, cept openSUSE that always configure its grub entry to load by uuid which changes whenever i mess with my partition table <Sigh>
[04:47] <tau> hey, well_laid_lawn sorry for annoying you again. when i run the gnome the settings for screen resolution works correctly , do you have some idea how to fix it ?
[04:48] <well_laid_lawn> tau: apart from what i suggested earlier no sorry
[04:48] <tau> well_laid_lawn:  sure.
[04:49] <well_laid_lawn> tau: you obviously didn't make the xorg.conf file as I suggested...
[04:54] <ibrahim> Hai all
[04:54] <ibrahim> i am a newbie
[04:54] <ibrahim> try to install kubuntu 10.04 LTS
[04:55] <ibrahim> nice n cool
[04:55] <well_laid_lawn> it is blue :]
[04:55] <ibrahim> yep :)
[05:23] <bronlar> i prefer the green of linux mint 7, over the blue, although the blue is  pleasing to the eyes
[05:23] <bronlar> i liked the green, prettier and happier
[05:23] <bronlar> hiyas lawn
[05:24] <bronlar> got my system almost all the way fixed now
[05:25] <well_laid_lawn> bronlar: you know you can type wel then it the tab button and it will complete my nick?
[05:27] <bronlar> nope dint know that. does that work in pidgin?
[05:27] <phoenix__> anyone there
[05:40] <bronlar> sorry well_laid_lawn i  dint know that tab autocompleted nicks
[05:40] <bronlar> but ty for the info
[05:41] <zus> bronlar, hi
[05:41] <zus> anyone use virtual box?
[05:41] <bronlar> so, can u explain to me how to use kgrub editor to fix my openSUSE entry so it doesnt load by using that stupid hex string that aint gunna work?
[05:41] <bronlar> hi zus, i do occassionally but prefer vmware
[05:42] <zus> i am looking for the 3.,1.8 oracle non free version
[05:42] <zus> this has been doing my head in the past 3 days
[05:42] <bronlar> what's oracle??
[05:43] <zus> www.virtualbox.org
[05:44] <zus> sun virtualbox is the open source version and oracle vitualbox is the non free... the new one is 3.2 and ubuntu WILL NOT install on it so far for me
[05:44] <bronlar> as  i said i prefer vmware
[05:44] <bronlar> although virtualbox has some features vmware lacks
[05:49] <zus> bronlar, true. the oracle version i prefer the mouse integration is much better than sun -OSE verion
[05:49] <bronlar> nods
[05:50] <bronlar> but if u install the vmware tools, u get the same mouse and drag n drop capabilities
[06:10] <zus> bronlar, how have youve been?
[06:10] <bronlar> zus, lonely, and very depressed and stressed out, but my pc issues are becoming solved
[06:11] <bronlar> i work hard, and play harder lol
[06:11] <zus> lol i just got back from the bar, talking about play harder
[06:11] <bronlar> lol
[06:12] <bronlar> i prefer to drink alone
[06:12] <bronlar> i dont do the bar scene anymore
[06:12] <bronlar> although  i coulkd stand having a one night stand from a woman at a bar right now rofl
[06:14] <zus> i got to this irish place, i know the 1 of the owners.. its pretty cool  not your typical bar
[06:19] <bronlar> yeh  i like the pubs
[06:19] <bronlar> especially irish ones
[06:49] <bronlar> goodnight all
[06:50] <Xcalibar> kind attention to the fellow experts in ubuntu who knows or owns a mac , i really need a quick help , i havent been here since the feisty release
[06:51] <bronlar> i dont own a mac sorry
[06:51] <bronlar> although ive installed it on SPARC's before
[06:51] <Xcalibar> i own a macbook pro and have windows 7 ultimate beta installed along with my mac os x , but i want to format the windows 7 and install ubuntu instead without reproduction of the bug
[06:52] <bronlar> which bug? have u checked the ubuntu bug forums?
[06:52] <bronlar> the link is in this room's desc
[06:53] <bronlar> the topic
[06:53] <bronlar> anyhow, good  luck, and good night
[06:55] <Xcalibar> goodnight
[07:04] <masstor> link irc español
[07:04] <well_laid_lawn> !es
[07:07] <masstor> thanks
[07:07] <well_laid_lawn> np :]
[07:14] <azra> hi,
[07:15] <azra> i've installed kubuntu 10.04 in dell vostro 1014, everything works fine expect sound, i cant play any audio?
[07:15] <azra> can anyone tell me whats the exect problem
[07:16] <SkEmO> i had the same issue, turned out one of the volume controls was muted unter the master
[07:16] <SkEmO> not the one on the traybar, i had to open the mixer
[07:18] <azra> SkEmO: u r right:)
[07:18] <SkEmO> :)
[07:18] <azra> SkEmO: i can play audio now,
[07:19] <azra> SkEmO: But,
[07:20] <azra> SkEmO: when i plug in my heaphone speaker also plays the the, it supposed to be off when i plug in the headphone
[07:21] <SkEmO> im sorry, plays the what?
[07:21] <azra> the same audio
[07:23] <SkEmO> uhm so you want to play something different out the speakers than from the headphones? o.O
[07:26] <azra> SkEmO: no no no, i want that when i plug in my headphone, internal sperakers automatic turn off and when in remove headphone speakers turn on automatic, the same thing i used kubuntu 9.04
[07:26] <SkEmO> oh
[07:26] <SkEmO> i havent done that, let me try it
[07:28] <SkEmO> hmm strange, i dont have that problem
[07:29] <well_laid_lawn> maybe set pcm as the master
[07:30] <azra> the same destro did have problem in HP C10
[07:30] <azra> maybe this laptop is not compatible for linux
[07:32] <azra> selecting PCM as a master didn't work
[07:34] <zus> i downloaded virtualbox 3.2 and ubuntu wont install. its possible something might be not right but ealier in the week in had it working might have been 3.1.8...i can find the oracle 3.1.8 all i find is the sun version.. might some one help me please?
[07:35] <zus> when i had ubuntu installed the mouse capture worked and it wasnt the one where i had to right cntrl click everytime
[07:36] <well_laid_lawn> if the ubuntu iso is fine then try in the vbox channel #vbox - they'll know
[07:36] <well_laid_lawn> zus: ^^
[07:38] <zus> well_laid_lawn,  i've tried...the .iso is fine its on a disc...with the sun version it works...but that is not the exact file i (had before, a clean install) wanted
[07:39] <well_laid_lawn> zus: I don't understand - if the iso is fine then ask in #vbox pls
[07:40] <zus> ill go with out no one in there were able to help either
[08:00] <buckfast> How come I keep having 1 blocked update: libboost-dev
[08:03] <azra> HI, i need to enable headphone detection in kubuntu 10.04
[08:13] <azra> SkEmO: i still have the same problem
[08:15] <cjae> Anyone here notice a sharp mem increase in 10.04?
[08:20] <SkEmO> yes
[08:20] <SkEmO> azra i dont know how to help there, im sorry
[08:21] <SkEmO> are you sure your not plugging in the jack into the mic instead the headphones?
[08:22] <well_laid_lawn> azra: telling us the soundcard type might help
[08:36] <tau> hey
[08:36] <tau> i am having some problems for reinstaling the ubuntu.
[08:36] <tau> well, i had installed the kubuntu when i got some problems and the system broken.
[08:36] <tau> so, i am trying to reinstall all by using the cd of the ubuntu but i don`t get to fix it.
[08:37] <tau> it seems to not format the directories correctly, it seems to write on top the old files.
[08:37] <tau> can anyone help me
[08:38] <well_laid_lawn> tau: you need to format the partitions in the partitioner
[08:38] <well_laid_lawn> you missed a step
[08:38] <tau> well_laid_lawn:  yes, but i don`t have how to run the partitioner, i tried to run the gparted using the cd but it didn`t work.
[08:39] <well_laid_lawn> tau: gparted always works afaik - what happened?
[08:39] <tau> well_laid_lawn:  well, in the first step at instaling the ubuntu, i chose to del the old partitions so i created new partitions but it didn`t work, i am desperated.
[08:39] <tau> well_laid_lawn:  i really don`t know, well i am using the live cd now
[08:40] <tau> well_laid_lawn:  when i run the gparted it seems in its box `unallocated`
[08:40] <well_laid_lawn> tau: it didn't work is hard for us to go on - can you give some details like any errors returned?
[08:41] <well_laid_lawn> tau: do you know there is a brazilian ubuntu help channel? - it might be easier in your native language
[08:41] <tau> well_laid_lawn:  well, when i try to reinstal the ubuntu it works perfectly but when i get into the system it seems to not be really formated(as i had chose).
[08:41] <well_laid_lawn> !br
[08:41] <sravanje> hai , i am from india
[08:42] <tau> well_laid_lawn:  there is but they don`t like to explain much
[08:42] <well_laid_lawn> k
[08:42] <sravanje> how can i execute java servlets& jsp programs in kubuntu
[08:42] <well_laid_lawn> tau: it might be the options you choose during the reinstall
[08:43] <sravanje> how can i connect in mysql browser
[08:44] <tau> well_laid_lawn:  well, i done exactly as i done at fist time when i installed it
[08:44] <tau> well_laid_lawn:  is there another partition to use without being the gparted
[08:45] <well_laid_lawn> tau: and it didn't work well then? - make sure there's a partition of about 10gb and make it ext3 or ext4 and mount it as root /
[08:45] <well_laid_lawn> tau: gparted is there 'cause it works very well
[08:46] <sravanje> please tell me anyone how can i use tomcat in ubuntu to execute java servlets& jsp's
[08:46] <well_laid_lawn> sravanje: I don't know about that but ask again in a bit and someone might
[08:48] <well_laid_lawn> sravanje: do you know there is an indian language channel?
[08:48] <tau> well_laid_lawn:  is there some way to format my hard disk using the cd of ubuntu
[08:48] <tau> well_laid_lawn:  and without using the gparted
[08:48] <well_laid_lawn> tau: yep - there's gparted in the menu there
[08:49] <well_laid_lawn> tau: there's fdisk and I believe cfdisk
[08:49] <tau> well_laid_lawn:  sure, i will try it
[08:49] <sravanje> tell me about indian language channel
[08:49] <well_laid_lawn> tau: those last two are command line apps
[08:49] <well_laid_lawn> !in
[08:49] <tau> well_laid_lawn:  when i typed `cfdisk` i got `ERROR CAN`T OPEN DISK`.
[08:50] <well_laid_lawn> sravanje: ^^
[08:50] <sravanje> thanks
[08:50] <well_laid_lawn> tau: you have to do   man cfdisk   to learn how to use it - you didn't name a disk
[08:50] <tau> SURE
[08:50] <tau> well_laid_lawn:
[08:54] <tau> well_laid_lawn:  i will try again
[08:54] <well_laid_lawn> k
[09:15] <tau> oh my god, i had to erase all disk to try to fix it.
[09:16] <tau> ;~
[09:16] <tau> it is installing now, i hope it works
[09:18] <well_laid_lawn> luck tau :]
[09:52] <tau> well_laid_lawn:
[09:52] <well_laid_lawn> ?
[09:52] <tau> well_laid_lawn:  i had to erase all disk to fix that.
[09:52] <tau> well_laid_lawn:  :D
[09:52] <well_laid_lawn> tau: so you said earlier
[09:52] <well_laid_lawn> all good now tau ?
[09:53] <tau> well_laid_lawn:  that's fine.
[09:53] <well_laid_lawn> well done tau :]
[09:53] <tau> well_laid_lawn:  :)
[09:57] <contrast> Greets, everyone... Anyone know of a good archive creator capable of making split .7z files that is _not_ Peazip?
[09:59] <well_laid_lawn> !info p7zip
[09:59] <well_laid_lawn> contrast: ^^
[10:00] <contrast> thanks
[10:00] <well_laid_lawn> np
[10:13] <CyberAngel> Hello, I upgraded to KDE 4.4.4 from Kubuntu ppa repositories and since then almost every kde application crashes! plasma-desktop, dolphin and even drkonqi when I`m trying to report the bug!
[10:13] <CyberAngel> I can still launch apps using krunner thankfully!
[10:14] <CyberAngel> anyone encountered something similar?
[10:24] <piano_> Hallo.
[10:24] <piano_> Weiß jemand, wie man 'projectx' unter Kubuntu installieren kann?
[10:26] <well_laid_lawn> !de | piano_
[10:26] <piano_> Thanks.
[10:27] <well_laid_lawn> CyberAngel: tried moving .kde to .kde-bak and logging out and back in?
[10:40] <tkbros> will it herm my coimputer if i power off it directly from ups instead of shutting down it from ubuntu?
[10:40] <PasNox> Hi
[10:41] <PasNox> i'm trying to use lirc with my mac
[10:41] <PasNox> which driver i need to use please ?
[10:47] <well_laid_lawn> PasNox: this is for a diff distro but still kde - http://mac.linux.be/content/apple-remote-macbook-21-mandriva-2010-kde
[10:50] <tkbros_> is there any eualizer manager is available for kubuntu
[10:54] <PasNox> well_laid_lawn: thanks
[10:55] <well_laid_lawn> np :]
[11:47] <paulchain> anyone know howto fix the flickering i get when i login to ubuntu or if i open certain programs i have an ATI 4650 1gb video card
[11:49] <well_laid_lawn> paulchain: I would think it would be a monitor refresh issue - read the X log to see what's being used?
[11:50] <paulchain> i dont think its that its set at 60 at least thats what ubuntu has
[11:50] <well_laid_lawn> k
[11:51] <paulchain> it seems to be an issue with the ATI driver i think some forms from way long ago said it might be a conflict with compiz but i disabled it and the problem still occures
[11:58] <paulchain> anyone know howto fix the flickering i get when i login to ubuntu or if i open certain programs i have an ATI 4650 1gb video card
[12:01] <well_laid_lawn> paulchain: can you tell the channel the driver you're using for it?
[12:02] <paulchain> the latest one that ubuntu offers its the one that has ATI Catalyst
[12:03] <paulchain> its working fine i mean world of warcraft even runs fine it just that pesky flickering with black lines every now and then thats bothersome
[12:04] <rohan> what is the proper way to request backport of a package in kubuntu?
[12:07] <well_laid_lawn> !backports
[12:09] <rohan> thanks well_laid_lawn
[12:09] <well_laid_lawn> np
[12:51] <buckfast> I converted some flac files to mp3s with soundconverter, then moved them to portable player storage card, but when I play the files in the portable player, the tags are incomplete
[12:52] <buckfast> but when I open the file on the portable player storage card, all tags seem to be there
[13:00] <senorpedro> hi folks
[13:00] <senorpedro> my alt+f2 application lauchner doesnt work anymore
[13:01] <senorpedro> how can i re-enable it?
[13:07] <buckfast> senorpedro: shortcut problem?
[13:07] <senorpedro> buckfast: no, i just found the setting and it is set correct
[13:07] <senorpedro> it just doesnt start
[13:16] <well_laid_lawn> maybe the selected keyboard changed buckfast
[13:16] <buckfast> I'm not the one with the problem
[13:21] <well_laid_lawn> oops :]
[13:21] <well_laid_lawn> maybe the selected keyboard changed senorpedro
[13:27] <senorpedro> well_laid_lawn: nope, krunner wasnt running
[13:27] <senorpedro> now its fixed
[13:28] <well_laid_lawn> k :]
[13:52] <BluesKaj> howdy folks
[14:20] <amichair> is it normal for dbus-daemon process to take up 775M RES?
[14:20] <Tm_T> amichair: doesn't sound very normal
[14:20] <Tm_T> amichair: how this is measured?
[14:20] <amichair> Tm_T: htop
[14:21] <Tm_T> amichair: 576 (KiB?) here
[14:21] <amichair> Tm_T: any ideas how to go about diagnosing it?
[14:22] <Tm_T> amichair: not really no, I don't know much about dbus
[14:22] <amichair> I have suspicion it's related to nepomuk/strigi or one of those, so I disabled them, but dbus remained bloated. Maybe after a restart it'll go away.
[14:22] <Tm_T> amichair: I have nepomuk and strigi active and still...
[14:27] <amichair> Tm_T: I noticed they were simultaniously active while strigi was indexing, so there might be a correlation. I guess I'll never know.
[14:28] <amichair> At least I hope I'll never know :-)
[14:33] <Tm_T> amichair: sure, strigi & stuff uses dbus, just like a lot of other things
[14:33] <buckfast> why is libboost-dev a blocked update for me?
[14:46] <amichair> what are the actual ppa links for those mentioned in https://wiki.kubuntu.org/Kubuntu/KubuntuPPAs?
[14:49] <nerdy_kid> i can only change plasma theme once, then i have to kill plasma and restart it to change the theme. any ideas?
[14:59] <nerdy_kid> i cant change my plasma theme more then once, help please?
[15:03] <amichair> nerdy_kid: sounds like a bug... did you check launchpad or the kde bug tracker?
[15:03] <nerdy_kid> amichair yeah
[15:04] <nerdy_kid> i just installed kde from an ubuntu commandline install and this issue showed up
[15:04] <amichair> you mean you installed kubuntu-desktop on an Ubuntu system?
[15:05] <nerdy_kid> amichair no i used the ubuntu alternate cd to install a commandline system, then installed kde-minimal
[15:06] <Eruaran> hi guys
[15:06] <nerdy_kid> i just created a new user and the issue doesnt happen there -- sounds like a rm to my config files {sob}
[15:06] <Eruaran> Has anyone noticed that kpackagekit waiting for authentication dialogue pops up underneath the other windows?
[15:07] <Eruaran> So the user only sees the waiting for authentication dialogue
[15:07] <Eruaran> And might not realize whats going on
[15:14] <amichair> Eruaran: Can you please report the bug?
[15:15] <Eruaran> amichair: yes
[15:17] <amichair> Eruaran: Thank you!
[15:17] <Eruaran> amichair: doing it now :)
[15:18]  * BluesKaj doesn't pay attn to kpackagekit...it's kinda flaky anyway :)
[15:19] <BluesKaj> ok , the desktop needs attn now ...BBL over there
[15:21]  * amichair doesn't pay attn to kpackagekit either, but does pay attention to any kubuntu bugs :-)
[15:21] <amichair> a smooth user experience is all that's missing to take over the world! :-P
[15:37] <jorge> hello
[15:38] <jorge> how can install some software from windows to kubuntu
[15:39] <alakoo> jorge: by using wine
[15:39] <jorge> how
[15:39] <schnurri> hallo
[15:40] <jorge> alakoo how
[15:40] <alakoo> by opening a .exe or a setup file with wine
[15:41] <alakoo> jorge: read http://en.wikipedia.org/wiki/Wine_%28software%29
[15:42] <jorge> thank u my frinds
[15:45] <Eruaran> woo my first bug report
[15:46] <nerdy_kid> my plasma theme wont change more then once, something in my user account it causing it -- i dont want to change accounts. help please?
[15:46] <Eruaran> Its not a major thing once you know where the authentication dialogue has gone ;)
[15:46] <Eruaran> But its not a great usability feature ;)
[15:47] <jorge> alakoo where can i get WINE in kubuntu
[15:48] <nerdy_kid> jorge sudo apt-get install wine ;)
[15:48] <Gerwin> Hmmm, I seem to have lost most of my icons, only the GNOME ones are appearing.
[15:49] <nerdy_kid> Gerwin try reapplying your icon settings in systemsettings, it seems to get screwed up now and then
[15:50] <Gerwin> nerdy_kid: There doesn't appear to be such a thing
[15:50] <jorge> nerdy_kid is my first time using kubuntu i dont no exacly
[15:52] <nerdy_kid> jorge oh ok, open a terminal (click the K icon in the bottom left) and type "konsole" in the search box.  then type "sudo apt-get install wine" (without quotes) in the terminal, type your password (you wont be able to see it that is normal) and hit enter.  When it is done you should have a "wine" folder in applications in your menu.
[15:52] <nerdy_kid> Gerwin systemsettings/appearance/icons ?
[15:52] <Gerwin> Lol
[15:53] <phong_> hey guys, is kubuntu any diff then ubuntu?
[15:53] <alakoo> kde over gnome, it's a bit different in general usability
[15:53] <Gerwin> nerdy_kid: Oxygen
[15:54] <nerdy_kid> Gerwin, right click the oxygen icons and hit apply.
[15:55] <Gerwin> nerdy_kid: Nope
[15:57] <nerdy_kid> Gerwin try reinstalling the oxygen icons: open a terminal and do sudo aptitude reinstall oxygen-icon-theme
[16:01] <jorge> nerdy_kid and after that is all ready. i can install software from windows
[16:02] <nerdy_kid> jorge wine is...very buggy to put it shortly.  You will be able to run somesoftware from windows, but you have about a 50/50 chance.
[16:04] <jorge> nerdy_kid but the kubuntu is gonna be the same.
[16:05] <nerdy_kid> jorge what do you mean?  wine is a program, so yes your kubuntu system will remain the same.
[16:05] <Gerwin> nerdy_kid: Nope
[16:06] <nerdy_kid> Gerwin details please....
[16:06] <Gerwin> nerdy_kid: I reinstalled the Oxygen theme, but it doesn't change anything...
[16:06] <nerdy_kid> Gerwin, do you have any other icons installed besides Oxygen?
[16:07] <Gerwin> nerdy_kid: Not that I know
[16:07] <jorge> nerdy_kid ok excume my question, remember is my first time i never have been see that
[16:08] <nerdy_kid> Gerwin:  do sudo aptitude install kde-icons-kneu and then switch to the kneu icons in systemsettings
[16:09] <nerdy_kid> jorge no such thing as a dumb question :)  glad to help :)
[16:09] <jorge> nerdy_kid thank u
[16:14] <Gerwin> nerdy_kid: No luck again
[16:14] <nerdy_kid> Gerwin take a look in .xsession-errors
[16:15] <ArGGu^^> jorge always is good to google if there is native alternative for the program.
[16:16] <jorge> ArGGu^^ ok thank
[16:34] <zus> oi!
[17:22] <apparle> hi guys, I had a powercut and I am running a desktop without a UPS. So it seems it corrupted my fs somehow, now I get run fsck manually. I cannot go into recovery mode as well. I am running a wubi installtion. Plz help
[17:28] <amichair> apparle: have you tried chkdsk from windows on the drive?
[17:28] <apparle> amichair: since I have wubi installation, I must check the .disk file of isn't it?
[17:28] <apparle> *of typed by mistake
[17:29] <jorge> my pc doesnt has audio
[17:29] <amichair> apparle: if you're not sure what got damaged, you can try the enclosing ntfs (I'm guessing) fs, and only if everything's ok there, then it's indeed the wubi fs-in-a-file
[17:29] <shadeslayer> jorge: ok did you try and play the test sound?
[17:30] <jorge> with the kubuntu
[17:30] <shadeslayer> in system settings under multimedia module
[17:30] <apparle> amichair: good point, I'll check the ntfs
[17:30] <shadeslayer> jorge: is this a new install?
[17:30] <jorge> where
[17:30] <jorge> yes
[17:30] <jorge> today
[17:31] <shadeslayer> jorge: ok,and you are trying to play mp3's right?
[17:31] <apparle> amichair: as for the fsck, is there any way to run fsck, without booting a live CD
[17:31] <jorge> yes
[17:31] <apparle> jorge: so you got sound in the multimedia ?
[17:31] <shadeslayer> jorge: did you install the mp3 codecs?
[17:32] <jorge> nop yet how can i do?
[17:32] <shadeslayer> jorge: open a konsole : alt+F2 > konsole
[17:32] <amichair> apparle: if the installed os doesn't boot... or does it?
[17:32] <apparle> amichair: doesn't
[17:32] <shadeslayer> jorge: and type : sudo apt-get install kubuntu-restricted-extras
[17:33] <apparle> shadeslayer: wouldn't apt-get update better? :P
[17:33] <amichair> apparle: so you have to boot from something else (e.g. livecd), as far as I know
[17:34] <shadeslayer> apparle: ah yes,i didnt think of that too.. also universe must be enabled :P
[17:34] <shadeslayer> jorge: scrap that
[17:34] <shadeslayer> jorge: press alt+F2 and type kpackagekit
[17:34] <apparle> shadeslayer: universe is usually enabled :P
[17:34] <jorge> said cueld not
[17:34] <shadeslayer> apparle: dont think so... fresh installs usually have only main.. thats what i noticed
[17:35] <shadeslayer> apparle: see.. it couldnt find the package :P
[17:35] <apparle> shadeslayer: that is due to apt-get update
[17:35] <shadeslayer> jorge: ok open a konsole and type : sudo apt-get update
[17:35] <jorge> add and remueve
[17:35] <shadeslayer> apparle: ok lets see :)
[17:36] <shadeslayer> jorge: kpackagekit wont be able to resolve the package deps correctly..
[17:36] <shadeslayer> jorge: leave kpackagekit open,in case we need it,and press alt+F2 > type konsole > hit enter
[17:36] <jorge> done
[17:37] <shadeslayer> jorge: ok the update command correct
[17:37] <shadeslayer> jorge: now do : sudo apt-get install kubuntu-restricted-extras
[17:37] <jorge> said done when i type update
[17:37] <jorge> and then
[17:38] <shadeslayer> jorge: ok good,now type the second command i gave you :)
[17:38] <apparle> shadeslayer: why doesn't kpackagekit work (I myself never used it)
[17:39] <shadeslayer> apparle: the backend is broken,it will be switched in favour of aptcc in 10.10
[17:39] <jorge> cuoldn t find
[17:39] <apparle> shadeslayer: aptcc what is that
[17:39] <shadeslayer> apparle: also since the java install asks questions,kpk doesnt support those things
[17:39] <shadeslayer> apparle: apt backend written in C
[17:39] <apparle> jorge: did you do "sudo apt-get update"
[17:40] <jorge> yes i did
[17:40] <apparle> shadeslayer: you win
[17:40] <shadeslayer> apparle: C++ :)
[17:40] <shadeslayer> !info packagekit-backend-aptcc | apparle
[17:40] <shadeslayer> apparle: told ya :P
[17:40] <shadeslayer> jorge: ok do you have kpackagekit open?
[17:40] <jorge> nop
[17:41] <apparle> jorge: then openit
[17:41] <shadeslayer> jorge: could you please open it?
[17:41] <shadeslayer> apparle: can you handle this.. ive gtg.. :P
[17:41] <apparle> jorge: so have you opened kpackagekit
[17:42] <jorge> yes continuo
[17:42] <jorge> is open
[17:43] <apparle> jorge: then on click on the 3rd icon on the left side and then "Edit software sources"
[17:43] <jorge> yes
[17:44] <apparle> now select the universe checkbox
[17:45] <shadeslayer_> apparle: youll need multiverse as well...
[17:45] <shadeslayer_> !info kubuntu-restricted-extras
[17:45] <jorge> and then
[17:45] <apparle> jorge: better select all of the ones which are unselected (but check if you are voilaating any laws of your country, by reading the licenses)
[17:45] <jorge> i am .Edit software sources.
[17:46] <apparle> jorge: do you see many check boxes?
[17:47] <jorge> yes
[17:48] <apparle> jorge: select all of the ones which are unselected (but check if you are voilaating any laws of your country, by reading the licenses)
[17:48] <amichair> https://help.ubuntu.com/community/Repositories/Kubuntu
[17:48] <jorge> i select just one
[17:48] <jorge> the other were select
[17:49] <amichair> (and I think it's not recommended to select proposed (pre-released updates) unless you really have to...
[17:50] <apparle> amichair: here we are selecting the components like universe multiverse etc
[17:50] <amichair> ah, ok :-)
[17:50] <apparle> jorge: then click ok and when asked to Reload, donot reload, directly press close
[17:50] <jorge> i dont know what happen
[17:51] <apparle> jorge: what happened? where are you know
[17:53] <jorge> now i listing but very slow
[17:54] <apparle> jorge: listing means?
[17:55] <jorge> the sound
[17:57] <apparle> jorge: did you select the various option isn edit software resources?
[17:57] <apparle> jorge: did you select the various option in edit software resources?
[17:58] <ArGGu^^> jorge you mean that you are listening, but the sound is quiet?
[17:58] <jorge> nop
[17:58] <jorge> what happen
[17:58] <jorge> yes i did
[17:59] <apparle> jorge: what happened after that
[17:59] <jorge> i listing but very slow
[18:00] <apparle> jorge: did you click on 'Reload' after you clicked ok?
[18:00] <jorge> yes
[18:01] <apparle> jorge: so is it reloading the lists?
[18:02] <apparle> shadeslayer_: you there?
[18:03] <shadeslayer_> apparle: barely
[18:03] <shadeslayer_> any issues?
[18:03] <shadeslayer_> you could just hit cancel you know... :P
[18:03] <apparle> shadeslayer_: when you said 10.10 may have aptcc, so we are dropping packagekit
[18:04] <shadeslayer_> apparle: no no no,its just the backend,kpk is here to stay till we find a better alternative which doesnt require changing alot of code
[18:04] <shadeslayer_> people worked really hard to get kpk working with 9.04 .. we dont want to change that
[18:04] <shadeslayer_> apparle: you can use aptcc in lucid too
[18:04] <apparle> shadeslayer_: no, I am not talking about kpk, are we dropping Packagekit
[18:05] <apparle> shadeslayer_: after all kpk is a gui isn't it
[18:05] <yashar> hi
[18:05] <jorge> well other day
[18:05] <apparle> shadeslayer_: I myself am working on shaman2 (hoping to make it solid enough for kubuntu)
[18:05] <jorge> thank u
[18:05] <apparle> jorge: did you cancle it
[18:06] <shadeslayer_> apparle: awesome :)
[18:06] <shadeslayer_> apparle: you can set DefaultBackend=aptcc in /etc/PackageKit/PackageKit.conf
[18:06] <shadeslayer_> ( of course you need to install the backend itself as i mentioned eaarlier )
[18:07] <apparle> shadeslayer_: so we will not be using packagekit or is aptcc a backend for packagekit only?
[18:07] <shadeslayer_> apparle: its a backend for kpk ... kpk is only the frontend
[18:08] <apparle> shadeslayer_: ok so we are dropping packagekit. Nice I never liked it
[18:10] <ArGGu^^> but the only aptcc backend in the repos is for packagekit :O
[18:10] <apparle> damn it
[18:10] <apparle> ya I also looked that up
[18:10] <shadeslayer_> apparle: yes :)
[18:10] <apparle> shadeslayer_: :(
[18:11] <shadeslayer_> apparle: https://wiki.kubuntu.org/KubuntuMaverickKPackagekitAppStore
[18:11] <apparle> shadeslayer_: how much done?
[18:11] <shadeslayer_> apparle: waiting for dist-upgrade support : https://wiki.kubuntu.org/Kubuntu/Todo
[18:12] <apparle> shadeslayer_: I am working on this http://drfav.wordpress.com/2009/12/01/introducing-shaman-a-new-universal-package-management-frontend/
[18:13] <shadeslayer_> apparle: yes ive heard of shaman :)
[18:13] <shadeslayer_> saw it in the chakra project
[18:13] <bittin> Hello, i was trying to Update my Grand Paretns Kubuntu, system but Kpackagekit failed when it was 22minutes left of installing packages and i rebooted the computer, to see what happend and now i got a broken Kubuntu system, is there anyway to let it continue the update, or check what packages its missing?
[18:14] <apparle> shadeslayer_: so if it works out as expected, I hope it will integrate into kde and kubuntu :)
[18:14] <shadeslayer_> apparle: looks great and almost like synaptic :P
[18:14] <apparle> ok bye guys
[18:14] <shadeslayer_> apparle: bye :D
[18:14] <apparle> got to go
[18:14] <apparle> shadeslayer_: its more concentrated on libshaman rather than the front end
[18:14] <shadeslayer_> bittin: what you can do is,switch to a tty with ctrl+alt+F1 > login > type : do-release-upgtade
[18:15] <shadeslayer_> *do-release-upgrade
[18:15] <bittin> shadeslayer_: yea i can only use ttys
[18:15] <shadeslayer_> apparle: ah ok
[18:15] <bittin> shadeslayer_: thx :)
[18:15] <shadeslayer_> bittin: that will be enough :)
[18:15] <bittin> how do i open a new tab in byouby?
[18:15] <apparle> shadeslayer_: who is the developer of kpackagekit, since I am working on the gui of shaman, it might be some help
[18:15] <shadeslayer_> bittin: also if your sources are of lucid,then just do : sudo apt-get update;sudo apt-get dist-upgrade
[18:15] <bittin> shadeslayer_: they are lucid
[18:16] <shadeslayer_> apparle: no idea,google is your friend :P
[18:16] <apparle> k thanks bye
[18:16] <shadeslayer_> bittin: ok then the dist-upgrade command,and if it still doesnt work,use sudo apt-get -f install
[18:16] <bittin> yea they are lucid
[18:16] <shadeslayer_> then dist-upgrade
[18:16] <bittin> k
[18:17] <bittin> it gets alot off error messages?
[18:18] <shadeslayer_> bittin: like?
[18:18] <bittin> its scrolls so fast i can't see it
[18:19] <shadeslayer_> bittin: hmm....
[18:19] <shadeslayer_> bittin: its upgrading right?
[18:19] <shadeslayer_> or does it halt?
[18:19] <bittin> shadeslayer_: it tries to
[18:19] <bittin> it halt
[18:19] <bittin> halts*
[18:19] <shadeslayer_> bittin: whats the last error message then?
[18:20] <bittin> will check later, trying the aptitude trick i got in #ubuntu-se atm
[18:20] <bittin> but if that dosen't work i will be back and pastebin what apt says
[18:20] <shadeslayer_> bittin: what aptitude trick?
[18:20] <bittin> aptitude install -f
[18:20] <bittin> but i got dependency hell kinda
[18:20] <shadeslayer_> bittin: i told you that too :P
[18:21] <shadeslayer_> bittin: sudo apt-get -f install
[18:21] <bittin> brb reboot and see if it works otherwhise i will pastebin the error
[18:21] <bittin> cya
[18:21] <shadeslayer_> sure
[18:22] <bittin> still got problems :(
[18:23] <bittin> last message is: dpkg cancel becouse of to many errors (1)
[18:25] <bittin> http://bittin.linuxuser.se/fel.txt
[18:27] <shadeslayer_> bittin: see the 3rd line
[18:27] <shadeslayer_> bittin: please run dpkg-reconfigure ...
[18:27] <shadeslayer_> google translate not working too well here :P
[18:27] <bittin> ah
[18:28] <shadeslayer_> yeah,try that :)
[18:28] <bittin> it wants a package to reconfigure
[18:28] <shadeslayer_> bittin: dpkg-reconfigure -a
[18:28] <bittin> ah there was a -a option
[18:29] <shadeslayer_> :)
[18:29] <daneel_> hi
[18:29] <shadeslayer_> this will reconfigure all packages
[18:29] <shadeslayer_> bittin: ive gtg cya later
[18:29] <daneel_> having trouble with opengl after upgrade to lucid
[18:29] <bittin> hope it works as i don't feel like reinstall this machine
[18:30] <bittin> shadeslayer_: ah, yea cya later, thanks for all help :)
[18:30] <daneel_> window compositing works fine with my nvidia 9500GT, but glxinfo gives error
[18:30] <daneel_> and opengl apps don;t seem to work
[18:31] <daneel_> glxinfo
[18:31] <daneel_> name of display: :0.0
[18:31] <daneel_> Error: couldn't find RGB GLX visual or fbconfig
[18:31] <shadeslayer_> bittin: np
[18:36] <bittin`> dpkg-reconfigure -a diden't work
[18:42] <bronlar> hi all
[18:43] <bittin`> hi
[18:43] <yunkwan_> hi, I'm compiling kimpanel on kubuntu 10.04. I encounter a problem when i run ' cmake -DCMAKE_INSTALL_PREFIX=/usr ' . It said " Unknown CMake command "qt4_add_dbus_adaptor". "
[18:44] <yunkwan_> which package am I missing here?
[18:44] <bronlar> oh i forget what app to install that identifies package names. there's an apt you can install that when u type in <command> qt4_add_dbus_adaptor identifies which package u need
[18:44] <bronlar> its on the forums. that's where i found it. google the cmake error
[18:45] <yunkwan_> bronlar: just google "cmake error" ?
[18:45] <bronlar> no, google the entire error
[18:45] <ArGGu^^> bittin` in your paste it says to run defoma-reconfigure -f. Have run it?
[18:46] <bronlar> if u find the app name that identifies packages from compile errors lemme know
[18:46] <bronlar> i forget what it is
[18:47] <yunkwan_> bronlar: I googled the cmake error but I couldn't find anything about the app you said.
[18:47] <bronlar> hmm
[18:48] <bronlar> did it tell u what package you were missing tho in yer search results?
[18:49] <yunkwan_> bronlar: I only got libkde4-devel but this package is on opensuse
[18:49]  * hubutm20 is away: Estoy ocupado
[18:50] <yunkwan_> bronlar: I found kdelibs4-dev in ubuntu repo, but I've already installed kdelibs5-dev which is newer
[18:51] <yunkwan_> ArGGu^^: what is the use of defoma-reconfigure -f ? I just ran it when I saw ur message. But still I can't succesfully compile...
[18:53] <ArGGu^^> yunkwan_ it was not for you
[18:53] <ArGGu^^> it was for bittin but just noticed that bittin quit before I said it
[18:57] <purerumble> Hi all ubuntu+kde loving people
[18:57] <purerumble> What's the name of the irc-client installed in kubuntu per default?
[18:57] <purerumble> It was a good client, and with xchat I kind of miss it.
[18:58] <bazhang> quassel?
[18:58] <purerumble> thank you so much, indeed that's it!
[18:58] <purerumble> But now of course I've revealed that I switched to ubuntu. ;-)
[18:58] <bazhang> you can still use it no problem
[18:59] <odhinn> Afternoon, all
[19:25] <bronlar> heys zus, you atk?
[19:32] <zus> bronlar,  i am now
[19:32] <zus> bronlar,  not sure for how long exactly
[20:08] <bronlar> cool
[20:08] <bronlar> im settingn up linux mint now
[20:15] <zus> bronlar, ya atk?
[20:16] <bronlar> yup, just preparing to compile kgrub
[20:17] <bronlar> installing the junk i need for it
[20:21] <zus> bronlar,  im trying to get this sorted my self
[20:40] <slow-motion> hi
[20:40] <bronlar> hi
[20:41] <danielpereira> hi
[20:50] <Mausschubser> hello, after the change to 10.04 my K-menu has left me
[20:50] <Mausschubser> can anybody help me to get it back?
[20:51] <amichair> Mausschubser: right click on the panel -> add widget -> add the k menu back
[20:52] <amichair> Mausschubser: (the widget is called application launcher, you can recognize the icon)
[20:52] <Mausschubser> amichair: ok, but what about the bar?
[20:52] <amichair> Mausschubser: which bar?
[20:53] <Mausschubser> amichair: the k-bar? or system bar
[20:53] <Mausschubser> or however you want to call it
[20:53] <amichair> Mausschubser: you mean your entire panel disappeared?
[20:53] <amichair> or just the k-menu?
[20:53] <Mausschubser> yep
[20:53] <Mausschubser> the whole thing
[20:54] <Mausschubser> left me
[20:54] <amichair> Mausschubser: try right-clicking the desktop -> Add Panel
[20:55] <Mausschubser> amichair: ah, there it is!
[20:56] <amichair> Mausschubser: does it have everything on it? if you want the whole thing recreated from scratch, you can delete the configuration file
[20:56] <Mausschubser> it's totally empty
[20:57] <Mausschubser> I added the k-menu but the rest is missing
[20:57] <amichair> Mausschubser: maybe http://ubuntuforums.org/showthread.php?t=1469243
[20:57] <Mausschubser> thanks, I will have a look
[21:01] <Mausschubser> amichair:  do I need a restart? my whole desktop has gone
[21:01] <Mausschubser> after deleting the config file
[21:01] <Mausschubser> the result was: <unknown program name>(27863)/: "Application plasma-desktop could not be found using service org.kde.plasma-desktop and path /MainApplication."
[21:01] <amichair> Mausschubser: that last plasma-dekstop command should bring it back
[21:02] <amichair> or you can logout and back too
[21:02] <Mausschubser> ah, ok, I will try that one, brb
[21:05] <amichair> Mausschubser: the first command quits plasma-desktop (which is the process running the desktop, widgets, etc.). second line deletes the config file. Third line starts the desktop process again, at which point it should create a default config file
[21:21] <andre_> hi
[21:44] <skyrocket> hello
[21:47] <amichair> skyrocket: hi
[23:37] <wornof> I just upgraded to kubuntu 10.04 from 9.10, and various virtuoso-t and nepomukservices processes are taking up a lot of cpu space. Is this likely to be a one-off indexing run, or will they likely always be like this?
[23:37] <wornof> If the latter, I may as well disable them now...
[23:37] <well_laid_lawn> prob the former afaik
[23:38] <wornof> Okay, cool
[23:38] <wornof> Thanks
[23:41] <zeltak> hya..anyone know of an plasmoid to get mac like menues in the taskbar?
[23:43] <_4rt3> zeltak: not a plasmoid i think but take a look around cairo-dock
[23:44] <zeltak> mmm nah im looking for it to be on the taskbar (saving space on my laptop) but thx _4rt3 for the tip
[23:45] <_4rt3> ;)
[23:47] <well_laid_lawn> zeltak: you could try this - http://www.downv.com/Linux/download-Open-Leopard-10006092.htm
[23:48] <zeltak> open leoprad whats that?
[23:50] <well_laid_lawn> from that page " Open Leopard allows you to make your KDE look like MacOSX"
[23:51] <shadeslayer_> well_laid_lawn: only mac OS X can be made to look like mac OS x
[23:51] <shadeslayer_> everything else is just a cheap copy
[23:52] <shadeslayer_> besides i like my desktop to breathe some 'Air' which has loads of 'Oxygen' :P
[23:58] <well_laid_lawn> zeltak: plenty of plasmoids here - http://kde-look.org/index.php?xcontentmode=70x77x78&PHPSESSID=f2b106b0ec7a0009a81f2a1cb24eff96