[00:00] <Gnea> Hi all, I'm having a problem getting my system to bootup and utilize the DVI output to the monitor.  the DVI is one of the 2 heads on this geforce FX 5600, the DVI cable itself works fine, and there is a DVI connector on the back of the monitor.  Yet, there is no signal being passed from the card to the cable.  Is there a way to troubleshoot this or can anyone help point me in the right direction?
[00:00] <nnd> Hi there, does anyone have an idea why Ubuntu 10.04's Gwibber doesn't post anything to identi.ca/status net?
[00:01] <VCoolio> Unsichtbar: run 'sudo smbtree' to see which folders you have shared, then disable that using nautilus > properties > share tab
[00:01] <ActionParsnip> tauren: could replace the UUID ni fstab with /dev/sda7   see if its nicer
[00:01] <soreau> Gnea: Does it send a signal at the bios splash when you first turn it on?
[00:01] <ActionParsnip> nnd: log a bug after checking settings
[00:01] <tauren> ActionParsnip: Ok, will try that. Also doing a manual fsck right now.
[00:01] <lisa_> Gnea, I use my second output, and I have to go to system/pref/monitors to make the switch and activate the monitor
[00:02] <Gnea> soreau: no. I've tried turning everything off, making sure the DVI cable is the only cable connected, and still nothing
[00:02] <lisa_> Is there a utility to log all wifi spots you run across and some of the details of each?
[00:02] <Purpley> soreau, Ok never mind im good, I found a tut on ubuntuforums.org for my exact model of my mouse and how to use its buttons
[00:02] <soreau> Gnea: sounds like its a hw issue then. Either with your card or monitor (or cable or adapter)
[00:02] <Purpley> soreau, But thank you very much for your help
[00:02] <Eleth> Is it possible to use unetbootin or usb-creator to create and IMAGE that can later be written to a USB stick?
[00:02] <nnd> How the fuck can it be that gwibber is so tightly integrated into 10.04 and apparently just doesn't work?
[00:02] <gothenburg> I want a new computer
[00:02] <nnd> Is there such a thing as a qa team for Ubuntu?
[00:03] <aliciapg> SocialSocial: i can't seem to find it...
[00:03] <Gnea> lisa_: I'll give that a try if I can get a signal to pass, thanks
[00:03] <IdleOne> !language | nnd
[00:03] <Purpley> lieb, I suggest googling your muse with ubuntu in the phrase
[00:03] <Gnea> soreau: that's basically what I figured on too... I tried asking in here a few weeks back, but all I got was "we're still using CRTs"
[00:03] <nnd> ubottu: You could make Gwibber family friendly.
[00:03] <rellis> Anyone know if there's a way to get postgres 8.3 for Ubuntu 10.04?
[00:03] <BiGViC> if I'm having trouble with alsamixer how can I see whats wrong?
[00:03] <nnd> Stupid bot.
[00:04] <lieb>  <Purpley> I did, I just gave up for the day, I tried the im(dont remember the rest of the name) program, but all it seems like I have to do is edit xorg
[00:04] <rellis> I can't use 8.4.
[00:04] <X_o> sudo /etc/init.d/vsftpd  rather than invoking init scripts through /etc/init.d, use the service(8) utility e.g. service vsftpd start since the script you are attempting to invoke has been converted to an upstart job, you may also use the start(8) utility, e.g. start vsftp
[00:04] <Gnea> soreau: and, of course, the standard D-SUB connector works just fine
[00:04] <IdleOne> nnd: the bot is not the one talking to a bot
[00:04] <BiGViC> alsa mixer randomly disappears on reboot sometimes...?
[00:04] <SocialSocial> omg, they movede menu.1st!! anyone know where?
[00:04] <lieb>  <Purpley> imwheel it's called, I tried the -c command for the gui but it doesn't do anything
[00:04] <Gnea> but I just had an idea... I should try a DVI-to-VGA adapter and see if the signal still goes through or not
[00:04] <soreau> Gnea: but yea, try asking in #hardware since its not a problem with ubuntu
[00:04] <nnd> IdleOne: Yeah ... funny ... no
[00:05] <Gnea> soreau: had even less of a response there, thanks though
[00:05] <IdleOne> nnd: state what is not working for you and maybe someone can help
[00:05] <X_o> how i can fix that problem??
[00:05] <lieb> Purpley it's just a minor issue, I wasn't really wanting to bother you guys with it, I was just commenting on another persons question
[00:05] <ActionParsnip> SocialSocial: its not moved, gruub2 uses different config files
[00:05] <ActionParsnip> !grub2 | SocialSocial
[00:05] <Purpley> lieb, http://ubuntuforums.org/showthread.php?t=332256 | It details how to use buttons on other bmouses in the beginning
[00:05] <nnd> IdleOne: Gwibber just doesn't work. Its the most specific description you can make ;)
[00:05] <Gnea> nnd: qa team? like, questions and answers?
[00:05] <SocialSocial> thanks ActionParsnip
[00:05] <lisa_> X_o,  Have you used update-rc.d
[00:05] <nnd> It doesn't send messages to identi.ca or status.net accounts.
[00:05] <X_o> no
[00:05] <rellis> Is there a repository I need to add to install postgres 8.3 on ubuntu 10.04?
[00:06] <nnd> If you send them, just nothing will happen - only the message will vanish from the input field.
[00:06] <IdleOne> nnd: in that case, you can submit a bug at launchpad.net or be a little more specific here with what you need help with
[00:06] <ActionParsnip> !ppa | rellis
[00:06] <lieb>  <Purpley> bookmarked, although I have a ms intellimouse optical, I guess it would work if I tell it I have 7 buttons!
[00:06] <Royall> umount: it seems /media/[re]drive_ is mounted multiple times
[00:06] <nnd> Gnea: No, qa like in quality assurance. Looks like Ubuntu really doesn't have anything like that.
[00:06] <Royall> It's "mounted" twice but they're both empty folders
[00:06] <Royall> I can't unmount either of them
[00:06] <Royall> does anyone have any idea
[00:06] <Purpley> lieb, I have an 11 button mouse :)
[00:07] <X_o> lisa_: you thinking that is the problem?
[00:07] <Gnea> nnd: ah, well 'qa' is something that companies and corporations came up with. have you ever read a GNU license over before?
[00:07] <Docteh> Royall: did you  cat /proc/mounts?
[00:07] <lieb>  <Purpley> please don't telll me it's a fat4l1ty mouse
[00:07] <brwarner> Does anyone have any experience setting up suexec for PHP on Apache?
[00:07] <Pici> Gnea: We do have a QA team
[00:07] <lisa_> X_o, No, just a method of configuring startup programs.  I start most things I don't really need last.
[00:07] <Gnea> Pici: I've been a bit out of the loop then
[00:07] <nnd> Gnea: That doesn't have anything to do with "NO WARRANTY" etc.
[00:07] <Royall> Docteh: http://pastebin.com/iTjeADgC
[00:08] <Gnea> nnd: http://qa.ubuntu.com/
[00:08] <Docteh> Royall: why are they mounted to same spot? thats interesting
[00:08] <Lividmime> Problem: No sound at all! Total linux-newbie installed ubuntu 10.4 on 5 yr old packard bell easynote. Checked http://ubuntuforums.org/showthread.php?t=205449 Soundcard is detected when trying aplay -l and lspci -v, all channels unmuted on alsamixer (I think, don't quite understand it) tried various other forums for solution; threads are either too technical (i.e. I don't get it) or not applicable. Any suggestions?
[00:08] <lieb>  <Purpley> I get this when I make a copy of my xorg cp: cannot stat `/etc/X11/xorg.conf': No such file or directory
[00:09] <Pici> nnd: #ubuntu isn't a complaint channel anyway, if there is a support question that we can help you with, we'd be more than willing to take a stab at it.
[00:09] <Royall> Docteh: my external hdd will randomly "unmount" without being unmounted... my music will stop, and the folder will be empty
[00:09] <soreau> ! audio | Lividmime
[00:09] <Royall> Docteh: if I manage to mount it again, it creates another /dev/[re]drive_
[00:09] <lieb>  <Purpley> I checked earlier and I can't even access my X11 folder, I know that it might have changed places from an earlier ubuntu to now
[00:09] <Docteh> ah
[00:09] <dancallo> I'm having an issue with MySQL Server 5.1 not being able to reinstall it because it is unstable and corrupt. I ran Update Manager and received an error message that a package: ure, was broken. When attempting to upgrade the package I get two separate error messages. Can anyone help? I have placed the images on imagebin.
[00:09] <salvatore> !list
[00:09] <nnd> Pici: How can I make Gwibber work with identi.ca?
[00:09] <lieb> the xorg.conf  Imean
[00:09] <Pici> nnd: don't ask me, ask the channel. (I don't use either)
[00:10] <Docteh> Royall: sounds like hardware is doing something odd
[00:10] <nnd> Hey dear channel! How can I make Gwibber, the integrated microblog client of Ubuntu 10.04, make work with identi.ca?
[00:10] <BiGViC> my sound works just fine but it's wierd because I had to reinstall it twice it randomly disappears???
[00:10] <tic^> nnd: did you log in to your accounts through gwibber? i have facebook and twitter running through gwibber as we type now.
[00:10] <Vooloo> I just updated my ubuntu, kernel etc. and now my network card is not working. I have tried to ifconfig down/up manually... what to do?!
[00:10] <soreau> lieb: In recent versions of X, its smart enough to guess what you need so it selects an open driver with options automatically
[00:11] <nnd> tic^: Well, of course i did.
[00:11] <Purpley> lieb, Hmmm same problem here.....X11 is there and when i type in locate xorg.conf it gives me /etc/X11/xorg.conf
[00:11] <soreau> lieb: If you need an xorg.conf, you will have to create one. Try Xorg -vonfigure
[00:11] <Royall> Docteh: restarting usually fixes it... but now I can't unmount either mount point as they're both "busy"
[00:11] <nnd> tic^: Twitter is also working.
[00:11] <soreau> lieb: Xorg -configure
[00:11] <Royall> despite being completely empty and dead
[00:11] <nnd> But identi.ca doesn't just do anything.
[00:11] <lieb> alright
[00:11] <Gnea> nnd: hrm, never used gwibber before, looks relatively new... trying it out now... so far, facebook is not liking me
[00:11] <res_ipsa> hmm, odd. my sound is crackling since i just rebooted
[00:12] <lieb> it says already active sor display )
[00:12] <lieb> 0
[00:12] <rellis> ActionParsnip: Dyou happen to know which ppa contains postgres 8.3?
[00:12] <res_ipsa> had an update, rebooted, now my sound is making buzzing/strange sounds.
[00:12] <res_ipsa> works fine in windows
[00:12] <nnd> Gnea: You see, a qa team would be supposed to at least check if components which are so deeply integrated as Gwibber do work at all.
[00:13] <soreau> lieb: yea, it will only work if X isnt running. The easiest way to do that is get to a vt (ctrl+alt+F1) then sudo /etc/init.d/gdm stop
[00:13] <dancallo> I'll come back later.
[00:13] <soreau> lieb: Afterward, do the same command with start instead of stop to relogin
[00:13] <ActionParsnip> rellis: the page has a search, search ALL the PPAs and you will maybe find one
[00:13] <rellis> yeah i did search for "postgres-8.3"
[00:13] <rellis> i found nothing
[00:13] <BiGViC> my sound output option is only dummy output stereo after it working fine just a second ago after reboot this happen to me twice?
[00:13] <X_o> sudo /etc/init.d/vsftpd  rather than invoking init scripts through /etc/init.d, use the service(8) utility e.g. service vsftpd start since the script you are attempting to invoke has been converted to an upstart job, you may also use the start(8) utility, e.g. start vsftp
[00:13] <res_ipsa> anyone else have problems with audigy 2 card after a recent reboot?
[00:14] <soreau> X_o: That is an informational message, not an error. Are you having some related issue?
[00:14] <X_o> i can running
[00:14] <X_o> i cannt running
[00:15] <Gnea> nnd: well, the way it usually works around here is that an app, that ubuntu didn't write from scratch to begin with, is usually maintained by authors and has its own support. if any ubuntu-related mods are made to the app, then the qa team would be the ones to ask about it then, if the original maintainers are not sure what is wrong or an error message points outside of their realm.
[00:15] <gothenburg> natt
[00:15] <rellis> Anyone know which PPA might contain postgres-8.3 for Ubuntu 10.04?
[00:15] <res_ipsa> even speaker-test is making a funny buzzing sound
[00:15] <X_o> soreau: I cann't running
[00:15] <tyranos> X_o, did you try service vsftpd start
[00:16] <Gnea> nnd: so, one could say that help could be found in #gwibber, but since that channel is empty, it'd be a wild goose chase. so, let's see how this qa thing works.
[00:16] <X_o> not
[00:16] <iceroot> rellis: why not 8.4?
[00:16] <soreau> X_o: From that message, it looks like it started. Try /etc/init.d/<service> status
[00:16] <radi> hello, does ubuntu live cd has cd/dvd burner ?
[00:16] <lieb> I'll try again later, I didn't write down anything and I lost x grrr
[00:16] <rellis> iceroot: Our QA people have only tested our app on 8.3.
[00:16] <X_o> job is ready running
[00:16] <rellis> on 8.4 i mean
[00:16] <iceroot> radi: yes but you need a second drive
[00:16] <soreau> radi: It has a burning program, yes
[00:16] <nnd> Gnea: I wouldn't annoy you with gwibber annoyance if it wasn't integrated into Ubuntu.
[00:16] <lieb> I'll read up on the xord documentation for the mouse, as I said it's not a big issue right now
[00:16] <Gnea> nnd: alright, have you been able to locate gwibber on the qa page?
[00:16] <nnd> It's part of the very Me Menu.
[00:17] <lieb> xorg*
[00:17] <rellis> err.. bah cant talk.. have not tested our app on 8.4
[00:17] <radi> iceroot, soreau and can i burn windows xp iso that way ?
[00:17] <Gnea> nnd: oh, I didn't notice. I always replace gnome with E17 as it's more memory efficient.
[00:17] <iceroot> radi: sure
[00:17] <lieb> and I'm pretty sure I can fix it on my own, I'm a linux noob, but not computer illiterate...
[00:17] <lieb> thanks anyways !
[00:17] <radi> good, i fucked up my mbr installing windows 7 from windows xp for some reason
[00:17] <radi> excuse my french
[00:17] <soreau> ! language | radi
[00:18] <Gnea> looks more like english to me
[00:18] <X_o> I have the same mesg
[00:18] <radi> good i have ubuntu on my desktop so i can create a live usb and boot it on the netbook
[00:18] <X_o> /etc/init.d/vsftpd status
[00:18] <soreau> radi: If you are using a machine with one burner and booting from cd, it would probably be near impossible to burn an iso
[00:18] <ActionParsnip> rellis: if you visit http://packages.ubuntu.com you could download the deb for karmic, not sure if it will fly but could be worth a try
[00:18] <maddie> hey all, i have a quick question. i go and set my resolution with nvidia-settings to change my resolution to a higher res, and when i restart my computer, it wont save it. Although i have tried to run nvidia-settings with root, and it save it to my xorg.conf. How can i manual set this?
[00:18] <radi> Gnea, excuse my french is a saying when you swear
[00:18] <radi> soreau, wh
[00:18] <lieb> radi i've done that the other day when I uninstalled ubuntu, and it was hell trying to find the sata drivers on floppy, because I dont have a winxp SP3 or a slipstreamed sp2 with sata drivers....
[00:18] <radi> why
[00:18] <X_o> sudo /etc/init.d/vsftpd status rather than invoking init scripts through /etc/init.d, use the service(8) utility e.g. service vsftpd start since the script you are attempting to invoke has been converted to an upstart job, you may also use the start(8) utility, e.g. start vsftp
[00:18] <JackTO> hi all
[00:18] <JackTO> I got the wierdest thing going on....   for the last 3 days, I'm learning ubuntu server and linux, and 50% of the times i bootup the system after the grub and after fsck run, i get a unreadahead error, and the screen, locks up with a blinking cursor (50% of the time).  Well, I just tried to SSH into the box, and I can perfectly, login as root not a problem, but on ther server screeen its all locked up...  what do u
[00:18] <soreau> radi: We dont excuse french here
[00:18] <Vooloo> my network card driver for realtek, r8169 does not work properly... is there a way to re-install or something?
[00:18] <Gnea> nnd: well, I went and clicked on "Package status pages", then found gwibber on the left-hand side
[00:19] <tyranos> X_o, service vsftpd status
[00:19] <rellis> ActionParsnip: Yeah I was considering that, thanks.
[00:19] <X_o> sudo /etc/init.d/vsftpd status rather than invoking init scripts through /etc/init.d, use the service(8) utility e.g. service vsftpd start since the script you are attempting to invoke has been converted to an upstart job, you may also use the start(8) utility, e.g. start vsftp
[00:19] <Gnea> radi: I knew that.
[00:19] <lieb> sorea : i'm used to people stepping on frenchies, I am one
[00:19] <radi> well, i dont even know if the live cd will recognize all of my netbook's hardware
[00:19] <ActionParsnip> Vooloo: can you use http://pastebin.com to give the output of: sudo lshw -C network   thanks
[00:19] <radi> personally i dont think it will
[00:19] <X_o> that is what I get it
[00:19] <maddie> vooloo: is it a wireless card?
[00:19] <radi> but, will see
[00:19] <nnd> Gnea: Where did you do that?
[00:19] <radi> soreau, how can i burn the iso image then ?
[00:20] <Vooloo> maddie: no, gigabyte mobo
[00:20] <maddie> radi: ever tried k3b or brasero?
[00:20] <greenjon> radi: just curious, what netbook?
[00:20] <Gnea> nnd: from http://qa.ubuntu.com
[00:20] <soreau> radi: The options would be boot from usb to keep the burner open or have two cdrom drives, one to boot and one to burn
[00:20] <willwork4foo> OK, so after installing the NVIDIA drivers on my newly built Ubuntu 10.4 box, it now won't boot
[00:20] <res_ipsa> ok, that was strange. went into alsamixer and the pcm, front, and surround channels were set to 0. I set them to 80, and now sound is back to normal.
[00:20] <willwork4foo> AT ALL.
[00:20] <tyranos> X_o, even if you type service vsftpd status instead of sudo /etc/init.d/vsftpd status
[00:20] <Vooloo> ActionParsnip: well umm, I cant access the net. It worked before the kernel upgrade.
[00:20] <Bigshot> where can i get MAC-FDISK for ubuntu?
[00:20] <radi> oh, i see your point soreau
[00:20] <willwork4foo> does anyone know how to force GRUB to display the menu at boot time?
[00:20] <radi> no, i wont do that, i will do a quick install of ubuntu then
[00:20] <radi> then will burn the iso
[00:21] <radi> format the partition and install windows
[00:21] <Vooloo> ActionParsnip: RTL8111/8168B PCI Express Gigabit Ethernet controller
[00:21] <X_o> I'm running as root
[00:21] <ActionParsnip> Vooloo: well um run: sudo lshw -C network > ~/Deskop/output.txt   then umm reboot and hold shift and boot to the old kernel
[00:21] <nnd> Gnea: And what am I supposed to do with those nice statistics?
[00:21] <radi> IF ubuntu recognizes my burned
[00:21] <ActionParsnip> Vooloo: what is the driver module?
[00:21] <Vooloo> ActionParsnip: ok sec
[00:21] <radi> i really hope it will
[00:21] <radi> burner*&
[00:21] <willwork4foo> anyone - how can I break into grub when booting if the menu doesn't display by default?
[00:21] <Bigshot> where can i get MAC-FDISK for ubuntu? soreau
[00:21] <radi> greenjon, its esprimo mobile
[00:22] <Vooloo> ActionParsnip: where does it say? Kernel driver in use r8169 ?
[00:22] <ActionParsnip> willwork4foo: hold shift at boot
[00:22] <soreau> Bigshot: I have no idea why you are asking me
[00:22] <willwork4foo> ActionParsnip: cool thanks
[00:22] <ActionParsnip> Vooloo: ok thats all i need
[00:22] <willwork4foo> trying now
[00:22] <ActionParsnip> Vooloo: let me dig
[00:22] <greenjon> radi: ahh ok
[00:22] <willwork4foo> great, that works. booting into "recovery mode" now
[00:22] <radi> greenjon, do you think it will be ok ?
[00:22] <radi> so i can install it, burn the iso and stuff ?
[00:22] <tyranos> Bigshot, try typing fdisk in the terminal
[00:22] <ActionParsnip> Vooloo: https://bugs.launchpad.net/bugs/553623
[00:22] <willwork4foo> Not sure what went wrong, my system completely broke when I installed the NVIDIA drivers
[00:22] <Vooloo> ActionParsnip: lsmod says r8169 39650 0
[00:23] <willwork4foo> oh FFS
[00:23] <willwork4foo> now it won't boot into recovery mode
[00:23] <greenjon> radi: honestly, i'm not sure because i'm using UNE 10.04 on an acer aspire one (right now) and everything worked fine out of the box
[00:23] <greenjon> radi: don't know about your netbook though
[00:23] <Gnea> nnd: that's what I'm trying to determine
[00:23] <radi> greenjon, if the live cd goes will
[00:23] <radi> so will the real install
[00:23] <radi> correct ?
[00:23] <Vooloo> ActionParsnip: no solution?
[00:23] <radi> well*
[00:23] <radi> not will
[00:24] <nnd> Gnea: ?
[00:24] <tyranos> radi do not use enter as punktuation
[00:24] <Vooloo> ActionParsnip: can I not use the driver from my old kernel? it worked
[00:24] <ActionParsnip> Vooloo: not as yet, boot to the old kernel and use that til it gets fixed
[00:24] <ActionParsnip> Vooloo: the old driver is compiled for the old kernel
[00:24] <darkangel> anyone know a good html editor that will work in the new lucid??
[00:24] <willwork4foo> OK - is there any way I can do an interactive boot or something? I have a dead Ubuntu system here, and all I did was install the Nvidia proprietary drivers
[00:24] <willwork4foo> now it won't boot at all
[00:24] <Claudinux> night night
[00:24] <ActionParsnip> willwork4foo: bluefish
[00:24] <radi> ok : if the live cd goes well, so will the real install, correct ?
[00:24] <willwork4foo> ActionParsnip: ??
[00:24] <Vooloo> ActionParsnip: gah ok, so I should update everything but the kernel
[00:24] <greenjon> radi: afaik, yes. and the real install may work even better :)
[00:24] <willwork4foo> this machine doesn't have an optical drive
[00:24] <radi> good
[00:24] <Vooloo> ActionParsnip: is 2.6.32-22-generic the latest?
[00:25] <Gnea> nnd: well, if you click on any of the graphs, it will show you a list of all of the reported bugs.... the one I noticed for facebook crashing when the login info isn't right is there
[00:25] <ActionParsnip> !info linux-image lucid
[00:25] <maxblade> whats the best program for making a live cd on usb drive
[00:25] <ActionParsnip> Vooloo: if you are using lucid, 2.6.32.22.23 is later
[00:25] <willwork4foo> this is getting worse and worse
[00:25] <Vooloo> ActionParsnip: 10.04
[00:25] <willwork4foo> now I can't even get to the grub menu by holding shift.
[00:25] <radi> btw how to hell to start start up disc creator from terminal greenjon  ?
[00:25] <ActionParsnip> Vooloo: you could try: sudo apt-get install linux-image-2.6.32.22.23-generic
[00:26] <tyranos> maxblade, unetbootin also it comes with ubuntu if you have it installed
[00:26] <greenjon> radi: my terminal skills aren't that great. maybe someone else can tell you that. sorry :(
[00:26] <ActionParsnip> Vooloo: you'll find you have the latest, misread the output
[00:26] <radi> :)
[00:26] <Bigshot> where can i get MAC-FDISK for ubuntu?
[00:26] <ActionParsnip> Vooloo: just boot, hold shift and select the older kernel
[00:26] <radi> ubuntu user ^^
[00:26] <Appl6> willwork4foo: How did you install it in the first place?  PXE?
[00:26] <Bigshot> i tried fdisk
[00:26] <Bigshot> doesn't detect the subpartitions
[00:27] <Vooloo> ActionParsnip: so weird the old works... sigh
[00:27] <tyranos> radi, usb-creator
[00:27] <Bigshot> is there a boot manager that can be copied to MBR to load any bootable partition from external hdd?
[00:27] <willwork4foo> Appl6: I had to install it by putting the initrd.gz and linux files into /boot and making a new entry in grub.conf - from Linpus
[00:27] <radi> tyranos, thanks
[00:27] <ActionParsnip> Vooloo: well if the kernel works then its fine
[00:27] <willwork4foo> it booted, and worked fine
[00:27] <radi> but, command not found :P
[00:27] <willwork4foo> then I installed the NVIDIA drivers
[00:27] <willwork4foo> and now it's SCREWED.
[00:28] <tyranos> radi what ubuntu version do you have ?
[00:28] <willwork4foo> It's half-past midnight and I've been doing this now for FIVE HOURS
[00:28] <Bigshot> is there a boot manager that can be copied to MBR to load any bootable partition from external hdd?
[00:28] <ActionParsnip> Vooloo: later doesnt always mean its any betetr, you can change /etc/default/grub  so the default is 2 rather than 0 so the older kernel boots by default
[00:28] <rellis> youshould probably stop working and go get drunk
[00:28] <Vooloo> ActionParsnip: so is this a kernel or driver issue? when I run update manager now everything seems updated.. so I am running old kernel but newer software?
[00:28] <radi> tyranos, anyway, i will use unetbootin
[00:28] <Vooloo> ActionParsnip: ok
[00:28] <Appl6> willwork4foo: What you just described required an OS to be installed in the first place.
[00:28] <BiGViC> When I type Alsamixer in terminal it shows cannot open mixer: no such file or directory exsist when it did just a 10 minutes ago before I restarted my machine?
[00:29] <willwork4foo> Appl6: there was one. Linpus.
[00:29] <willwork4foo> and a worse implementation of Linux, I have NEVER seen.
[00:29] <ActionParsnip> Vooloo: the kernel has modules for the hardware, the default one doesn't work and there is a bug logged, you could add to say "yes I get this too" etc
[00:29] <soreau> BiGViC: case sensitive
[00:29] <Bigshot> oh come on
[00:29] <Bigshot> anyone?
[00:29] <willwork4foo> OK - it's hanging at boot now, at the "Checking Battery State" stage
[00:29] <Bigshot> is there a boot manager that can be copied to MBR to load any bootable partition from external hdd? ActionParsnip ?
[00:29] <rellis> ActionParsnip: Ended up finding one that appears to be for luci, installed easy enough.. https://launchpad.net/ubuntu/+source/postgresql-8.3/8.3.9-1/+build/1397005
[00:29] <ActionParsnip> Bigshot: i believe lilo works like that
[00:29] <Bigshot> how can i install lilo?
[00:30] <ActionParsnip> !lilo | Bigshot
[00:30] <BiGViC> soreau: no in terminal I type alsamixer
[00:30] <soreau> BiGViC: Then install alsa-utils
[00:30] <Appl6> willwork4foo: Can it PXE boot?
[00:30] <ActionParsnip> Bigshot: there are guides all over for lilo installs, grub is more flexible and can boot any OS
[00:30] <Vooloo> ActionParsnip: I have like 5 rows when I boot up, how do I know the id number for each?
[00:30] <BiGViC> soreau: this has happen 2 times before where I had to reinstall alsamixer I don't want to keep doing that every random reboot :(
[00:31] <willwork4foo> Appl6: it can, but I only have a mac and I've been struggling to get it to PXE boot for two hours
[00:31] <Bigshot> ActionParsnip, the thing is i have already installed OS'es but they can't boot
[00:31] <BiGViC> and when I use the command aplay -l it saids no sound cards found
[00:31] <Firefishe> How do I install a 32-bit .deb file using the command line on a 64-bit system?  I have the 32 bit libraries, so I'm pretty sure what I have will work.
[00:31] <tyranos> Vooloo, the first entry is 0
[00:31] <Bigshot> so i need a bootloader
[00:31] <soreau> BiGViC: does /usr/bin/alsamizer exist?
[00:31] <eboyjr> Hello.. quick question. I copied the entire contents of the hard drive to a file and I want to mount it to access the contents. It was a harddrive of a Win3.1 computer. I think the harddrive was partitioned though.. How can I mount one of the partitions?
[00:31] <eboyjr> ..with a loopback I think
[00:31] <tyranos> Vooloo, and the other operating system entry which acts as a separator also counts as an entry
[00:31] <Daekdroom> !info tasksel
[00:32] <tertl3> win 3.1?
[00:32] <willwork4foo> OK, this is now screwed. Somehow, installing the Nvidia Driver has killed my install and I can't get it back.
[00:32] <willwork4foo> I can't boot into ANYTHING.
[00:32] <halp_pls> what. a. pain.
[00:32] <eboyjr> tertl3: Windows 3.1 the one before Windows 95
[00:32] <X_o> cuando trato de parar ese programa
[00:32] <Gnea> !gwibber
[00:32] <Vooloo> tyranos: ok I see. is it normal to have text grub as default? I havent gotten this on my other pc
[00:32] <JusticeZero> When I boot up, on the startup screen before logging in I get two lines of error message on top of ewach other so I can't read them. It does show that I can skip mount with a button or another button to manual something, and skipping mounting seems to work, but i'd like to not have things like that. Known issue?
[00:32] <soreau> willwork4foo: at what point does the boot fail?
[00:32] <ActionParsnip> Vooloo: its in number order from top to bottom from 0 to n
[00:32] <willwork4foo> it gets as far as "Checking Battery State"
[00:32] <BiGViC> soreau: yes it does
[00:32] <willwork4foo> then it freezes.
[00:32] <tyranos> Vooloo, i think so
[00:32]  * Gnea has determined that the 'gwibber' program is full of fail
[00:33] <soreau> BiGViC: IF you do echo $PATH, does it show /usr/bin?
[00:33] <Appl6> willwork4foo: Stop spamming the channel with repetitions and using Enter for punctuation.
[00:33] <UnoDos> \join ubuntu
[00:33] <UnoDos> hola
[00:33] <UnoDos> Hola
[00:33] <UnoDos> \leave
[00:33] <UnoDos> \menu
[00:33] <UnoDos> \option
[00:33] <willwork4foo> I can get to the grub menu, and edit my boot parameters.... but I can't work out how to get the thing up to a usable level
[00:33] <FloodBot4> UnoDos: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[00:33] <harkirat_> hey
[00:33] <tyranos> unodos it is / not \
[00:33] <harkirat_> whats this for
[00:34] <harkirat_> ?
[00:34] <harkirat_> ?
[00:34] <UnoDos> \exit
[00:34] <Gnea> UnoDos: no, /exit
[00:34] <ActionParsnip> Bigshot: theres a package which I forget the name of which can detect OSes. Might contain the word 'detect' but it may help
[00:34] <ActionParsnip> !grub2 | Bigshot
[00:34] <BiGViC> soreau: it shows /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
[00:34] <Gnea> !ubuntu | harkirat_
[00:34] <soreau> BiGViC: what about this command?:  which alsamixer
[00:34] <willwork4foo> can anyone help me out here - this is really starting to drive me mad
[00:34] <willwork4foo> :(
[00:35] <harkirat_> guys how do I connect to rsportalirc.no-ip.org
[00:35] <BiGViC> soreau: it shows /usr/bin/alsamixer
[00:35] <Coty> Anyone know of a way of enabling xinerama with dual monitors with an ATI graphics card.
[00:35] <soreau> willwork4foo: ok so you get to the boot screen and go to boot ubuntu. What happens after that?
[00:35] <Gnea> willwork4foo: a "usable level" meaning..?
[00:35] <harkirat_> it says unknown server
[00:35] <soreau> ! who | willwork4foo
[00:35] <ActionParsnip> harkirat_: what does it provide, "connect" is so ambiguous it nearly means nothing at all
[00:35] <soreau> BiGViC: Then running alsamixer should work
[00:35] <Bigshot> ActionParsnip, can it detect mac os x?
[00:35] <willwork4foo> soreau: it freezes during the boot cycle, at "Checking Battery State"
[00:36] <willwork4foo> it's an Acer Aspire Revo (Atom CPU)
[00:36] <BiGViC> soreau: cannot open mixer: No such file or directory
[00:36] <ActionParsnip> Bigshot: sure
[00:36] <soreau> willwork4foo: Have you tried booting into recovery mode and removing the nvidia-common package?
[00:36] <BiGViC> soreau: when I type exactly alsamixer as I did before
[00:36] <willwork4foo> Gnea: at the risk of sounding rude... a level that I can USE THE SYSTEM
[00:36] <willwork4foo> :)
[00:36] <Coty> Sorry, let me rephrase that does anyone know of a way of having compiz and xinerama.
[00:36] <willwork4foo> soreau: it won't boot into recovery mode either
[00:36] <BiGViC> soreau: it happens when I reboot sometimes not all the time is confusing and annoying
[00:36] <ActionParsnip> Bigshot: grub2 is used on the ppc iso as well as the i386 which can be installed on intel based macd
[00:36] <soreau> willwork4foo: what about a live cd?
[00:37] <willwork4foo> soreau: this is an Atom-CPU system with no optical drive.
[00:37] <Gnea> willwork4foo: lol, not rude, but a bit 'generic' :) have you tried removing the battery?
[00:37] <willwork4foo> Gnea: it's not got a battery.
[00:37] <soreau> willwork4foo: How did you install ubuntu then?
[00:37] <BiGViC> soreau: when I do aplay -l it shows aplay: device_list:223: no soundcards found...
[00:37] <Gnea> willwork4foo: is it a netbook?
[00:37] <willwork4foo> soreau: It came with Linpus Linux. I copied the linux and initrd.gz files to /boot and updated grub.conf
[00:37] <soreau> BiGViC: I guess you have audio driver issues then
[00:37] <willwork4foo> Gnea: no, a net-top
[00:37] <Firefishe> If, after I've done a `sudo dpkg -i --force-architecture filename.deb' I want to remove it, what is the correct procedure?  This is a 32 bit install on a 64 bit machine.
[00:38] <willwork4foo> mini desktop
[00:38] <soreau> ! audio | Bigshot
[00:38] <soreau> ! audio | BiGViC
[00:38] <Aliv3> hello
[00:38] <Gnea> willwork4foo: okay - did the the problem start after you copied the kernel and initrd over?
[00:38] <jimisrvrox> hey guys im in need of some help with my wireless linux box. I can get an access point but it will not connect
[00:38] <ActionParsnip> harkirat_: is it an FTP server? an email serve? a web server???
[00:39] <willwork4foo> Gnea: No. It booted fine, and worked fine, until I agreed to install the NVIDIA proprietary drivers. Since then, it's refused to boot.
[00:39] <Vooloo> ActionParsnip: weird, it works now. not sure if its stable tho
[00:39] <Aliv3> when i installed the product to virtualbox(support in #vbox) it said "Geom error,FATAL: INT18: BOOT FAILURE"
[00:39] <BiGViC> soreau: when I got to sound preferences my device is not listed at all it only shows dummy outpu stereo
[00:39] <willwork4foo> it won't even boot into recovery mode.
[00:39] <Aliv3> i wasnt sure if it was virtual box or ubuntu
[00:39] <willwork4foo> I have a USB stick here, but I can't seem to get a working bootable image onto it for Ubuntu
[00:39] <p1l0t> How do I get java for firefox through the repository?
[00:39] <p1l0t> !java
[00:39] <ActionParsnip> Firefishe: sudo dpkg -r -P filename
[00:39] <Gnea> willwork4foo: have you tried without the 'quiet splash' options?
[00:39] <Firefishe> ActionParsnip: Thanks.
[00:39] <ActionParsnip> Vooloo: test for a while, this os why Ubuntu LEAVE the old kernels on
[00:40] <BiGViC> soreau: also I can't restart or shutdown ubuntu regularly...? it takes me back to login screen like if something is locked or missing?
[00:40] <willwork4foo> Gnea: yes, that's where it tells me it's got as far as "Checking Battery State" (there isn't a battery, this is a desktop) and it freezes.
[00:40] <willwork4foo> Gnea: this was working just fine before I installed this ^&&$^%%$ driver.
[00:40] <soreau> BiGViC: thats strange man, not sure what is going on with your system
[00:40] <Gnea> willwork4foo: all desktops have a battery in them to keep the state of the cmos in check. otherwise, the time/date would never be current.
[00:41] <willwork4foo> Gnea: OK fair enough.... regardless, I don't think this is a hardware issue.
[00:41] <Gnea> willwork4foo: what if you try "init=/bin/bash" instead of "single"?
[00:41] <Aliv3> AHH WTF
[00:41] <Aliv3> UBUNTU WONT BOOT
[00:41] <tyranos> bigvic, is your system uptodate ?
[00:41] <BiGViC> yes
[00:41] <BiGViC> fresh install too
[00:42] <willwork4foo> Aliv3: you and me both....
[00:42] <Aliv3> i just installed it
[00:42] <soreau> willwork4foo: Try booting with these kernel options:  nvidia.blacklist=yes nouveau.blacklist=yes
[00:42] <Aliv3> and it told me to reboot
[00:42] <Firefishe> ActionParsnip: Apparently, -r and -P cannot be used simultaneously.  -P (--purge) did the trick by itself, though.  Thanks for the input. :-)
[00:42] <Aliv3> and it gives me a fail
[00:42] <Gnea> willwork4foo: soreau has a good method
[00:42] <soreau> Aliv3: What did you do that told you to reboot and when in the boot process does it fail?
[00:43] <willwork4foo> trying that now
[00:43] <tyranos> i had similar problem where sometimes when i boot my soundcard wasnt detected , i couldnt mount my other partition and could not shutdown , but when i reboot i t works and sometimes not but after the latest updates from lucid it went away
[00:43] <Aliv3> when i first got ubuntu it said try or install
[00:43] <Aliv3> i tried it for a while
[00:43] <Aliv3> rebooted
[00:43] <Aliv3> went to install and i installed and it said reboot
[00:43] <mek8630> I am setting up a partition to install Ubuntu and I need to know what "Mount point" is and what I should put in it?
[00:43] <Aliv3> now it doesnt boot
[00:43] <BiGViC> I can fix the alsa issue doing this command sudo apt-get --purge remove linux-sound-base alsa-base alsa-utils then sudo apt-get install linux-sound-base alsa-base alsa-utils which is just reinstalling alsa but I dont' want to do that everytime it randomly disappears :(
[00:44] <willwork4foo> YES! II have a # prompt
[00:44] <BiGViC> could it be because I have 2 sound cards?
[00:44] <soreau> ;)
[00:44] <willwork4foo> thanks soreau!!!!
[00:44] <tyranos> mek8630, mount point should be / is equivalent to the c:\ in windows
[00:44] <willwork4foo> that worked - now I need to remove the offending article and fix this system
[00:44] <willwork4foo> hmm
[00:44] <BiGViC> well one is a tv tuner but alsa lists it as a sound card anyways
[00:44] <Appl6> mek8630: http://www.easy-ubuntu-linux.com/ubuntu-installation-606-12.html
[00:44] <Aliv3> so
[00:44] <soreau> willwork4foo: Now remove the nvidia driver package (nvidia-common)
[00:44] <Aliv3> i can try it but not install
[00:45] <mek8630> tyranos: ok so I just need to put the "/" and not one of the others that it lets me choose from?
[00:45] <willwork4foo> apt-get uninstall nvidia-common ?
[00:45] <HoldenC> can anyone tell me if the "Radeon HD 4200" IGP works out of the box in ubuntu?
[00:45] <soreau> willwork4foo: Or you can try blacklisting only nouveau but..
[00:45] <Firefishe> I'm using an Asus G50V laptop with 10.04.  My headphone jack volume from flash in Firefox 3.6 is really low compared to previous installs.  Why might this be?  All my volume levels are up all the way, and amarok is as loud as can be.  Kubuntu desktop.
[00:45] <Appl6> HoldenC: https://wiki.ubuntu.com/HardwareSupport
[00:46] <Lividmime> Problem: No sound at all! Total linux-newbie installed ubuntu 10.4 on 5 yr old packard bell easynote. Checked http://ubuntuforums.org/showthread.php?t=205449 Soundcard is detected when trying aplay -l and lspci -v, all channels unmuted on alsamixer (I think, don't quite understand it) tried various other forums for solution; threads are either too technical (i.e. I don't get it) or not applicable. Any suggestions?
[00:46] <soreau> willwork4foo: I will leave it for you to tinker with for now :)  (its apt-get remove <package> btw)
[00:46] <tyranos> well / ist the root of the filesystem and the system files goes there
[00:46] <judgen> how do i disable the screen from ging black after a while using xfce
[00:46] <Firefishe> Also unusual, is that I can plug in my headphone in the jack, but it won't take over from the speakers unless I unplug it and plug it back in again.  This is proving rather annoying. ;)
[00:46] <mek8630> tyranos: would would happen if I put one of the others like "/boot" or "/home" ?
[00:46] <HoldenC> Appl6: thanks, I was hoping to get an answer from someone who actually have that video card :)
[00:46] <judgen> powe saving i a sham
[00:46] <willwork4foo> thanks soreau!!!! :) wish me luck - thanks for helping me out!
[00:46] <albertolempira> hey guys, im trying to print with a hp laserjet printer in 11x17inch output but i'm unable to change the size of the paper can somebody help me?
[00:46] <soreau> willwork4foo: no problem, glad I could help ;)
[00:46] <Appl6> judgen: http://ubuntuforums.org/showthread.php?t=339855
[00:47] <Bigshot> how can i install GRUB2 on external HDD?
[00:47] <judgen> Appl6,  thanks ill check it out
[00:47] <jimisrvrox> hey guys im in need of some help with my wireless linux box. I can get an access point but it will not connect
[00:47] <tyranos> mek8630, / is the most important mount point
[00:47] <soreau> jimisrvrox: What encryption type is it?
[00:47] <tyranos> mek8630, if you choose something else you d still need a partiotion for /
[00:48] <jimisrvrox> soreau: its open because of drivers and crap
[00:48] <mek8630> tyranos: thank you I appreciate your help very much. so when creating a partition do I want "logical" or "primary"?
[00:48] <soreau> jimisrvrox: I guess your drivers and crap arent working right if it cant connect then ;)
[00:48] <Appl6> HoldenC: It irks people when you not only don't search for the answer to your problem, but you even refuse to look at links that are provided to you.
[00:48] <judgen> Appl6,  if i uninstall xsaver and all other sceensavers.. should that not work?
[00:49] <jimisrvrox> soreau: heh well it was working as of 2 days ago and I figure the driver is ok if I can get an access point with it
[00:49] <Costanza> hi.. maybe someone can answer my why when i sometiems boot into ubuntu my network wont start.. and i have to restart for it to work.. sometiems even restart several times for it to work. also sometimes i cant adjust sound it says "waiting for sound system to respond" and i have to restart for it to work
[00:49] <Appl6> judgen: Maybe, but I'd suggest just disabling the screensaver.  It may turn out that something else depends on xsaver, and it breaks because you uninstalled it.
[00:49] <soreau> jimisrvrox: What driver is it using ?
[00:49] <jimisrvrox> soreau: Ive tried unplugging and replugging the router, rebooting the machine, taking the card out and putting it back in
[00:49] <tyranos> mek8630, i m not sure please ask soreau
[00:49] <jimisrvrox> let me see right quick im on my laptop and in front of hte machien rght nwo
[00:50] <Aliv3> no one ever figure out my keyboard problem
[00:50] <Kane_Hart> anyone get vmaps working yet
[00:50] <mek8630> tyranos: ok thanks
[00:50] <soreau> jimisrvrox: What makes you think it is not connecting? (conversely: what happens exactly when you try to connect, which method are you using etc)
[00:50] <Aliv3> Ubuntu wont let me type
[00:50] <mek8630> soreau: when creating a partition do I want logical or primary?
[00:50] <HoldenC> Appl6: no, I just looked, it says supported, but still many people on various forums seem to have problems, so I was asking here
[00:50] <Aliv3> i cant log on
[00:50] <remanifest> I'm wondering if anyone knows if it's possible to use the easy_e17 script to install the bling module (& others)?
[00:50] <darkangel> how do i join a diff room lmao
[00:50] <Cap88> Bigshot: Grub 2... maybe some help here: http://ubuntuforums.org/showthread.php?t=1401997
[00:50] <soreau> mek8630: I havent been following your setup exactly. What is all on the disk and what are you doing?
[00:51] <remanifest> darkangel: /join #room
[00:51] <Aliv3> no for real
[00:51] <jimisrvrox> crap I forget the command to show what the driver is heh
[00:51] <jimisrvrox> its been a while since I had to mess with wireless on my linux boxes
[00:51] <nighmi> hi, I just set up a ubuntu system on a notebook computer and I'm trying to use edge scrolling for my touchpad... it works perfectly for horizontal scrolling, but vertical scrolling doesn't work, no matter what I try.. any ideas?
[00:51] <mek8630> soreau: well its kind of a long story but I am wanting to install Ubuntu by creating a partition because I have Win 2000 on the other half
[00:51] <airdem> hello, i am looking for a "supported netbooks list" (ubuntu-10.04-netbook)
[00:51] <judgen> Appl6,  i only ask here because #xubuntu has been dead for hours. I dont know how to turn all the power settings off. I dont need them as my elec is pretty much free where i live.
[00:52] <remanifest> airdem: What netbook do you have?
[00:52] <darkangel> cap88 what you doin
[00:52] <airdem> remanifest, s10e
[00:52] <soreau> mek8630: Typically, (for msdos partition type) you do three primary partitions then make an extended partition if you need more than four partitions, then under the extended are the logic partitions IIRC
[00:52] <mek8630> soreau: but the reason I just didn't do it the easy way is because I have a corrupted version of Ubuntu on the partition I am wanting to format and copy over it
[00:52] <jimisrvrox> im running it through network manager and so the two globes light up and then when I run iwconfig it will show the access point but then the connection drops out
[00:52] <Aliv3> Ok
[00:52] <darkangel> !Cap88 did you close our chat??
[00:52] <Aliv3> i have a fresh install of UBUNTU 10.04
[00:52] <soreau> ! partition | mek8630
[00:53] <remanifest> airdem: You're good
[00:53] <Aliv3> but when i try to log on
[00:53] <airdem> how do you know?
[00:53] <Aliv3> i cant type in my password
[00:53] <Aliv3> please help
[00:53] <remanifest> airdem: I would recommend Lubuntu or Enlightenment DR17
[00:53] <soreau> ! enter | Aliv3
[00:53] <Cap88> !darkangel ya... but can re-open it.
[00:53] <soreau> Aliv3: Can you move the mouse?
[00:53] <Lividmime> Problem: No sound at all! Total linux-newbie installed ubuntu 10.4 on 5 yr old packard bell easynote. Checked http://ubuntuforums.org/showthread.php?t=205449 Soundcard is detected when trying aplay -l and lspci -v, all channels unmuted on alsamixer (I think, don't quite understand it) tried various other forums for solution; threads are either too technical (i.e. I don't get it) or not applicable. Any suggestions?
[00:53] <Aliv3> ! enter | soreau
[00:53] <remanifest> airdem: http://www.youtube.com/watch?v=DlDKoU-VeRw
[00:54] <airdem> remanifest, why is there no list like on other distros sites? :P
[00:55] <bastidrazor> 10.04 using usb-creator-gtk .. i do not get the option to use the extra space for files unless i start usb-creator-gtk with gksudo
[00:55] <remanifest> airdem: there is - https://wiki.ubuntu.com/HardwareSupport/Machines/Netbooks
[00:55] <Aliv3> Ok, I Have a fresh install of UBUNTU 10.04 but it takes me to the login screen everything looks fine, but when i try to type it doesnt work. please help
[00:55] <airdem> remanifest, "ubuntu-10.04-netbook-i386"
[00:56] <airdem> remanifest, whops, i meant "This page lists some of the netbooks that have been tested with Ubuntu Netbook Remix 9.04"
[00:56] <soreau> Aliv3: Can you move the mouse?
[00:56] <mek8630> soreau: so what is the difference between a logical and primary partition if you have time to tell me real quick
[00:56] <jimisrvrox> Aliv3: umm..ok did you try unplugging the keyboard and plugging it back in?
[00:56] <Aliv3> yes, mouse is fine
[00:56] <p1l0t> In lucid netbook how do you see windows unmaximized? When I right click and choose unmaximize they disappear
[00:56] <jimisrvrox> assuming you have a desktop system
[00:56] <Appl6> judgen: I don't know about disabling all power management, but you can try "xset s off" for the screensaver.
[00:56] <soreau> mek8630: google and/or wikipedia could probably explain it a lot better
[00:56] <remanifest> airdem: You'll get better performance on Lubuntu or Enlightenment DR17 than you will with Ubuntu - but support has only increased since 9.04
[00:57] <Aliv3> yes ive tried repluging but im running ubuntu on VMWare Workstation 7.
[00:57] <mek8630> soreau: ok thank you
[00:57] <airdem> remanifest, okay, thank you very much
[00:57] <p1l0t> quit
[00:57] <remanifest> airdem: No prob
[00:57] <Aliv3> i assume its ubuntu because i can run other operating systems on my workstation
[00:58] <jimisrvrox> oh VMWare
[00:58] <soreau> Aliv3: The only thing I can think of is to toggle allowemptyinput option via xorg.conf
[00:58] <jimisrvrox> well I would think so if you can run and type on other OS's
[00:58] <Aliv3> how?
[00:59] <hhhhddddhhhdd> hola
[00:59] <Octo_> hello
[00:59] <hhhhddddhhhdd> what u doing
[00:59] <soreau> hhhhddddhhhdd: This is a support channel, not social or chat channel
[00:59] <Octo_> trying to install 10.04 withot much luck=[[[
[00:59] <Aliv3> do  you want me to ask that question in #Vmware?
[01:00] <remanifest> I'm wondering if anyone knows if it's possible to use the easy_e17 script to install the bling module (& others)?
[01:00] <hhhhddddhhhdd> how to use metaexploit
[01:00] <radi> soreau, what if i run the live cd from usb
[01:00] <radi> will i be able to burn ?
[01:00] <soreau> Aliv3: It makes it easier if you put the name of the person you are talking to in your message so they get highlighted
[01:00] <soreau> radi: I already went over this
[01:01] <radi> can you repeat please :)
[01:01] <hhhhddddhhhdd> who u talking too?
 radi: The options would be boot from usb to keep the burner open or have two cdrom drives, one to boot and one to burn
[01:01] <jimisrvrox> soreau: hey I think its using the b43 driver
[01:01] <radi> oh i didnt get that
[01:01] <soreau> jimisrvrox: oh that sucks
[01:01] <radi> sorry
[01:01] <radi> soreau, and what is the application to burn cds ?
[01:01] <soreau> radi: wodim
[01:01] <jimisrvrox> yeah and what really sucks is that I cant find my damn flash drive to put a new driver on the box if I have to
[01:01] <civixier> Hmm... I'm confused. According to sound settings, I dont have any system sounds, but still I hear drums when I get an alert and close windows and stuff. Why?
[01:02] <Aliv3> civixier
[01:02] <Aliv3> did you try turning the volume up
[01:02] <Aliv3> or unmuting it?
[01:02] <radi> soreau, anything more gui orientated ?
[01:02] <soreau> radi: sure
[01:03] <bastidrazor> radi: brasero, k3b
[01:03] <Aliv3> @radi if its that bad ill make u a gui
[01:03] <hhhhddddhhhdd> how can i send a file remotely under the same network?
[01:03] <Aliv3> jk'
[01:03] <soreau> jimisrvrox: Ok, I have a couple ideas. First, what makes you say it drops the connection after it connects?
[01:03] <civixier> Aliv3 How do you mean?
[01:03] <Aliv3> nothing
[01:03] <soreau> hhhhddddhhhdd: scp
[01:03] <Octo_> When installing 10.04, I get the [errno 5] i/o error. I've read the official response, to restart and choose "Run without installing". I've tried the "take out a stick of RAM" method as well... Any other possibilities?
[01:03] <radi> blah, anyway, i started partitioning to install ubuntu
[01:03] <monokrome> Hey. Does anyone here know why "clicking Add" after authorizing Gwibber to access Facebook doesn't work?
[01:03] <Aliv3> @soreau so why wont typing work
[01:03] <no-name> how is ubuntus 64 bit version?
[01:03] <radi> so, will download the damn iso later and try k3b or brasero
[01:04] <jimisrvrox> well ok..in network manager the two globes will light up and stay lit but will never turn to bars
[01:04] <radi> live cd is working well, except the 2d acceleration
[01:04] <soreau> Aliv3: I have no idea. I would try toggling allowemptyinput option but usually your mouse wont work either if this is the problem
[01:04] <bastidrazor> radi: unless you have another cd/dvd drive attached you can not use the same drive the liveCD is using to burn an iso
[01:04] <hhhhddddhhhdd> what is the discussion about?
[01:04] <soreau> jimisrvrox: and then it asks for password again?
[01:04] <radi> bastidrazor, im using usb for the live ubuntu
[01:05] <radi> so, burner is free
[01:05] <jimisrvrox> yeah soreau the driver is b43-pci-bridge
[01:05] <bastidrazor> radi: then you're in good shape.
[01:05] <radi> bastidrazor, well, i cant cancel the partitioning process now :P
[01:05] <jimisrvrox> soreau: no it doesnt ask for a password...it goes to the next network showing in network manager because i have like 4 or 5 networks detected around my neighborhood
[01:05] <soreau> jimisrvrox: Do you have other machines on the network and/or connection sharing going on?
[01:05] <greenjon> no-name: i use the wubi version and it's fine *shrug*
[01:06] <upgrdman> what file do i put my script in if i want to run during bootup
[01:06] <jimisrvrox> I have other machines on the network but only this one has issues
[01:06] <radi> wubi is not good, installs too many rubish you dont need
[01:06] <jimisrvrox> module=ssb
[01:06] <no-name> greenjon: any compatability issues?
[01:06] <Aliv3> @sor: so ubuntu is screwed?
[01:06] <jimisrvrox> and like I said it was working fine as of two days ago
[01:06] <jimisrvrox> with no changes since ten
[01:06] <jimisrvrox> then*
[01:07] <greenjon> no-name: not a single one so far :)
[01:07] <matcouto> Is it safe to resize the ubuntu's partition using gparted? Im running out of space...
[01:07] <djzn> hey guys, after gnome-panel last update... something strange is happening, the gnome panel takes something like 10 seconds to start, after the desktop is loaded, any info on this?
[01:07] <radi> btw im getting pretty low 3d acceleration with virtualbox and windows on my desktop ubuntu :/
[01:07] <soreau> Aliv3: probably has something to do with it running in a vm
[01:07] <greenjon> no-name: if i could get my games to work in it, i'd totally wipe xp from the hdd
[01:08] <radi> games run ok on almost all distros
[01:08] <radi> ( with nvidia cards ) :P
[01:09] <greezmunkey>  /quit
[01:09] <ne7work> !flash
[01:09] <greenjon> radi: i do have an nvidia card. just haven't taken the time to try installing any games on 10.04 because i don't have the space right now
[01:09] <radi> well, on ubuntu is easy to run games
[01:09] <radi> im having troubles with my gentoo tho
[01:09] <radi> cause i have an ati card
[01:10] <radi> wine is working ok
[01:10] <radi> still cant make vbox to work that good but ..
[01:10] <greenjon> radi: ya, i've heard it's tough with ati. good luck on that :P
[01:10] <radi> i play world of warcraft on ubuntu and wine
[01:10] <AndChat|> Is there is diskette image I could use to try and force boot a cd?  My server doesn't even check my cd rom, even after I tried all of the bios settings.
[01:11] <radi> yesterday i tried counter strike 1.6 with virtualbox and windows xp
[01:11] <radi> works but .... 20fps
[01:11] <radi> i wonder if wine will do better
[01:11] <greenjon> radi: never hurts to try
[01:12] <kanzie> Im running ubuntu 8 on a server and now Im thinking of doing dist-upgrade, how big is the risk of it going awry?
[01:12] <radi> i have a slow machine tho :p
[01:12] <radi> kanzie, you should use slack or gentoo for servers
[01:12] <Aliv3> WTFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
[01:12] <AndChat|> This is driving me nuts.  When I select my cd rom in boot options the drive doesn't even blink and gives me an error message
[01:12] <kanzie> radi: that's not wathat I asked
[01:12] <bastidrazor> kanzie: any upgrade has risks.. backup any thing important
[01:12] <Aliv3> i enter the password and it sends me to the login page
[01:13] <greenjon> Aliv3: you sure the password is correct?
[01:13] <Aliv3> yes
[01:13] <Aliv3> enless im a dumb ass and didnt spell password correct
[01:13] <greenjon> Aliv3: i saw the same thing happen to someone a few hours ago and they thought they were putting in the same password, but had confused it with a different one
[01:13] <j800r> guys, i have a question. I have Kubuntu installed on a separate partition on my hard drive. how can i remove the kubuntu partition and extend the Ubuntu one to fill the whole drive without reinstalling
[01:13] <bastidrazor> Aliv3: look in ~/.xsession-errors for possible reasons why gdm crashed
[01:13] <radi> kanzie, im just giving advice from my experience
[01:13] <radi> ubuntu is not secure enough
[01:13] <bastidrazor> j800r: gparted
[01:14] <Aliv3> whoops
[01:14] <Aliv3> i did spell password wrong
[01:14] <Aliv3> ima dumb ass
[01:14] <greenjon> Aliv3: just meaning to say, don't rule out all possibilities. we as humans often overlook small things
[01:14] <greenjon> Aliv3: hehe it's all right :)
[01:14] <paissad> any idea about a tool for administrating mpd via a web navigator ?
[01:14] <bsmith093> how do i get a pdf printer in lucid
[01:14] <paissad> cups-pdf ?
[01:14] <bsmith093> that was quick
[01:14] <bsmith093> thanks
[01:14] <sebsebseb> Aliv3: a little late reply, but watch the language :)
[01:14] <paissad> bsmith093, :)
[01:15] <j800r> bastidrazor, apparently gparted doesn't come installed with lucid and when i do an apt-get install it says it needs to install a ton of kde files (on my ubuntu partition) :\
[01:15] <Aliv3> ok sory
[01:15] <radi> also gentoo and slack are far more stable for servers without X
[01:15] <j800r> if gparted is on the live CD however, I guess i'll do it from there
[01:15] <bsmith093> now can that pdf printer accept any data an app can print
[01:17] <bastidrazor> j800r: gparted is a Gnome application, and try System > Administration > Disk Utility
[01:19] <bsmith093> can i batch print to a pdf printer cups-pdf
[01:19] <kanzie> why is ubuntu sporting 0.9.5 of mercurial
[01:19] <kanzie> for apt-get
[01:19] <kanzie> should I install from tar-ball?
[01:19] <Uresu> Is anyone else watching the world cup opening ceremony?
[01:20] <bsmith093> i have 80+ files to print (cbz, cbr) and it would be nice not to have to open each one seperately
[01:20] <Undeon> There's an aplication to past an .conf to web?
[01:20] <Uresu> I swear the singer just sang "The spirit of \Ubuntu"
[01:20] <jimisrvrox> soreau: so any ideas as to what might have cratered it? like I said I can get as far as getting an access point for it but it will not fully connect
[01:20] <bsmith093> Undeon, yes pastebin-it
[01:20] <Undeon> thanks bsmith093 =)
[01:21] <hmuller> if alsa driver, libraries, and utilities versions do not match could that be why sound is not working?
[01:21] <bsmith093> can i batch pirnt to cups-pdf? and can evince print cbr and cbz files
[01:21] <soreau> jimisrvrox: I have had random issues like this in the past with ubuntus nm-applet and networkmanager programs.. if you want to kill those and try through the terminal we can
[01:21] <jimisrvrox> yeah that would be good
[01:22] <jimisrvrox> I as well have had probs with nm in the past as well
[01:22] <Undeon> bsmith093: what's the command to install it? apt-get intall ...... ?
[01:22] <soreau> jimisrvrox: sudo killall nm-applet NetworkManager && iwconfig <iface, like wlan0 or bcm0> essid <your essid here> && dhclient <iface>
[01:22] <Uresu> Noone
[01:22] <bsmith093> apt-get install pastebinit
[01:22] <bsmith093> or pastebin-it
[01:23] <jimisrvrox> unfortunately Windoze 7 has spoiled me on the laptop but I have Ubuntu boxes all around and im fixing to see about working on another one so im not far gone from linux :)
[01:23] <Uresu> wow, white boys not giving a fuck about Africa, what a surprise.
[01:23] <koshie> Hi
[01:23] <koshie> Hi, I want to join #ubuntu-release-party but I need to be invited... Why ?
[01:23] <bastidrazor> Uresu: is that really neccesary?
[01:23] <soreau> jimisrvrox: If you have a complicated setup with multiple machines on the network, there could be a conflict with the ip addresses
[01:23] <tsimpson> koshie: that channel is closed
[01:24] <greenjon> ! language | Uresu
[01:24] <monokrome> Is there an app akin to Wine for OSX apps?
[01:24] <koshie> Closed ? It's empty tsimpson ?
[01:24] <Jordan_U> monokrome: No.
[01:24]  * monokrome hoped that No would be a yes :'(
[01:25] <bastidrazor> koshie: maybe you're looking for #ubuntu+1 ?
[01:25] <Jordan_U> monokrome: What application are you trying to run?
[01:25] <tsimpson> koshie: it's only used while a new release happens, other times it's locked and closed
[01:25] <monokrome> Jordan_U: Steam
[01:25] <koshie> tsimpson, And to discuss with the organizers ?
[01:25] <Chuck27>  just for Beta's?
[01:25] <koshie> bastidrazor, I will see
[01:25] <Jordan_U> monokrome: Steam is being officially ported to linux, and you can run the windows client in wine.
[01:26] <tsimpson> koshie: do you know what #ubuntu-release-party is?
[01:27] <Jordan_U> koshie: #ubuntu-release-party is basically a place for people to go during release time so that #ubuntu (which is a support channel) doesn't get filled up with people asking if the next version has been released yet.
[01:27] <monokrome> Jordan_U: This is pretty lame, but there's a TF2 item that I want and only mac users can have it.
[01:27] <monokrome> If you log in and play for a minute on a mac, you get the item.
[01:28] <kanzie> does anyone know what I have to do to be able to do apt-get install mercurial and get a later version than 0.9.5 which is 3 years old
[01:29] <hmuller> Anyone have the inspiron mini (1012)?
[01:29] <tyranos> kanzie, look for a ppa in launchpad
[01:29] <remanifest> kanzie: https://help.ubuntu.com/community/PinningHowto
[01:30] <jimisrvrox> soreau: damn...this sucks! running it as admin and its telling me permission denied!
[01:30] <remanifest> jimisrvrox: What are you trying to do?
[01:30] <ks3> kanzie, are you just speaking of the source control package mercurial? I'm showing version 1.4.3 in the repositories.
[01:30] <Jordan_U> kanzie: https://launchpad.net/~mercurial-ppa/+archive/stable-snapshots
[01:30] <kanzie> Im runnign ubuntu 8, could that be the reason?
[01:31] <dumb_dumb> guys is ubuntu 10.4 server edition can support interl processor or just amd?
[01:31] <soreau> kanzie: get a later version of ubuntu? In 10.04, default repo mercurial version is1.4.3
[01:31] <remanifest> dumb_dumb: It support intel too
[01:31] <jimisrvrox> iwconfig wlan1 essid ..... && dhclient wlan1
[01:31] <soreau> kanzie: Yes, that *is* the reason
[01:31] <remanifest> supports
[01:31] <soreau> jimisrvrox: You have to use sudo for each command
[01:31] <upgrdman> do the contents of /etc/rc.local get run during startup? I put a line in there and it does not seem to do it
[01:31] <dumb_dumb> but i can`t find the link to donload intel processor 64 but
[01:32] <soreau> jimisrvrox: && executes the next command if the previous one succeeded
[01:32] <bsmith093> how do i convert a crapload (80+) of files in cbr and cbz format all to pdf? i have cups-pdf, but evince apparently won't print these files
[01:32] <jimisrvrox> telling me cant create /var/lib/dhcp3/dhclient.leases permission denied SIOCSIFADDR: Permission denied SIOCSIFFLAGS: Permission denied
[01:32] <jimisrvrox> yes Im sorry I did it with sudo
[01:32] <dumb_dumb> the file i found is using amd name
[01:32] <dumb_dumb> is just the same for the 64 bit server edition?
[01:33] <olrrai> hi, do u know why netcat has not -exec option?
[01:33] <soreau> jimisrvrox: Right but you have to type sudo multiple times like this:  sudo cmd1 && sudo cmd2
[01:33] <jimisrvrox> ooooo
[01:33] <Aliv3> Thanks!!! I Have Ubuntu operational
[01:33] <Aliv3> thanks guys
[01:33] <soreau> Aliv3: What fixed it?
[01:33] <jimisrvrox> ok
[01:34] <jimisrvrox> the dhcp is showing
[01:34] <kanzie> soreau: yes, but it is a server...cant reinstall it every year. I did dist-upgrade but it didn't change much
[01:34] <greenjon> Aliv3: glad to hear that :)
[01:34] <jimisrvrox> damn got the no DHCPOFFERS recieved
[01:35] <radi> guys, how do you start grub2 when you reboot
[01:35] <jimisrvrox> I guess the driver is shot
[01:35] <radi> before ubuntu
[01:35] <soreau> kanzie: Then your options include trying to install from source or trying to use the deb from later version of ubuntu repos but this is potentially dangerous
[01:35] <radi> how to go to the options where you can edit grub2
[01:35] <soreau> kanzie: best way would be to try getting the source built
[01:35] <upgrdman> every time i restart i get the "your drives are being check for errors" screen, this didn't happen before. anyone know if this is a common bug?
[01:35] <vallejos> hello
[01:36] <soreau> upgrdman: probably something to do with system time being messed with
[01:37] <dumb_dumb> some one could give me the link to donload the ubuntu server 10.4 64-bit version for intel processor?
[01:37]  * AaronM Aaron 
[01:37] <Swian> its the same as amd64
[01:37] <Swian> dumb_dumb its just 64bit, not cpu specific
[01:37] <dumb_dumb> oh isee swaian
[01:38] <dumb_dumb> couse in the file says amd, i thougt is for amd only
[01:38] <Swian> nope
[01:38] <dumb_dumb> oke thanks
[01:38] <Vooloo> are there any desktop widgets that are still in development? I can only find very outdated ones...
[01:38] <olrrai> why netcat has not -exec option?
[01:38] <dumb_dumb> one more thing guys
[01:38] <dumb_dumb> any one has success installing kannel on ubuntu server?
[01:39] <jimisrvrox> so soreau its not getting a dhcp lease from the router
[01:39] <soreau> jimisrvrox: Did you try reloading the driver? rmmod/modprobe
[01:39] <uLinux> "sudo mv /usr/share/dbus-1/services/org.freedesktop.Notifications.service /usr/share/dbus-1/services/org.freedesktop.Notifications.service.disabled" this renames that file?
[01:39] <jimisrvrox> no I havent tried unloading reloading
[01:40] <soreau> jimisrvrox: also try shutting down or disconnecting all other machines on the LAN to make sure they arent interfering
[01:40] <bastidrazor> uLinux: yes
[01:40] <uLinux> ty bastidrazor
[01:40] <uLinux> brb
[01:41] <xue> good
[01:42] <jimisrvrox> weird this is..
[01:42] <jimisrvrox> tried rmmod/modprobe...sudo essid and dhclient and still no dhcp lease
[01:43] <jimisrvrox> thing about it is I have one wired linux box and my windoze wireless box and this wireless linux box
[01:43] <YankDownUnder> jimisrvrox, Have you tried setting a static IP then changing back to a DHCP lease to see if that resolves the issue?
[01:44] <jimisrvrox> and like I said everything was working fine but one day I decided to mac filter this box off the network and then put it back on later and it worked fine then the next day it went to the crapper
[01:44] <jimisrvrox> I think what I am going to do is power cycle the router and see if that helps with the DHCP lease...
[01:44] <jimisrvrox> brb
[01:45] <remanifest> jimisrvrox: not sure if it would be worth a try, but wicd may be able to do a better job
[01:45] <uLinux> I've set tooltips_enabled to 0 but still there is some alot of popups in Show desktop, tray icons, etc ... How can I disable it?
[01:45] <uLinux> *alot
[01:48] <somaie> j/ #ubuntu-br
[01:50] <jimisrvrox> soreau: well power cycle didnt do anything
[01:50] <a_user> Chinese input support on 9.04?
[01:51] <a_user> i looked at https://help.ubuntu.com/community/SCIM
[01:51] <a_user> SCIM does not start at login
[01:51] <a_user> and it is not on the menu
[01:52] <jimisrvrox> YankDownUnder: so what commands would I need to use to set the ip and subnet on the adapter?
[01:53] <hahas> jim,ifconfig
[01:53] <jimisrvrox> wtf is wlan1:avahi?
[01:53] <aaro700930> jimisrvrox ifconfig ethX X.X.X.X netmask 255.255.255.0 (maybe) depends on your IP addressing
[01:53] <hahas> jim,u are the typical ubuntu user in my eyes
[01:53] <tyranos> jimisrvrox, sudo ifconfig eth0 netmask 255.255.255.0
[01:53] <hahas> lol
[01:54] <jimisrvrox> meh
[01:55] <yuhong> Ubuntu should really raise the CPU for the generic-pae kernel to M686.
[01:55] <yuhong> This way the PAE kernel will get CMOV instructions.
[01:55] <uLinux> I've set tooltips_enabled to 0 but still there is alot of yellow popups. How can I hide/disable them?
[01:57] <imprint> When I got to upload photos to myspace, the computer can see the folder, but cannot see the photos, yet I can go to my pictures folder directly and see all the photos, what would cause this problem?
[01:57] <QpSmiley> hello I'm having a problem with a newly insalled 10.04 LTS on my desktop computer.  I tried to enable the graphics cards drivers to enable normal effect, it told me to restart and when I did the loading screen freaked out and a black and white terminal showed up
[01:59] <YankDownUnder> jimisrvrox, http://www.computerhope.com/unix/uifconfi.htm
[01:59] <jimisrvrox> urghhh...shit setting it static didnt do anything either!
[01:59] <IdleOne> !ohmy | jimisrvrox
[02:00] <hahas> imprint,from mars?ehmm,you should see some options \
[02:00] <jimisrvrox> ......no comment...on the foul language bot...anyways..
[02:00] <spezticle> after a reboot apache isn't prompting me for my password for the encrypted self signed keys... any suggestions as to why?
[02:00] <RevolLLJK> How can I force Karmic to boot into the login screen?
[02:00] <aaro700930> jimisrvrox are you doing a ping or something to try it work?
[02:00] <RevolLLJK> I can't get into GNOME because I tried to boot straight into XBMC but its broken
[02:00] <bastid_raZor> spezticle: possibly ask in #httpd  ..they may have faster answers
[02:01] <RevolLLJK> Now I can't do anything until I can get back to the login screen...
[02:01] <spezticle> bastid_raZor: thanks :)
[02:01] <jimisrvrox> aaro700930: yeah I was trying to connect to a site
[02:01] <QpSmiley> My login screen is coming up in the terminal ....
[02:01] <QpSmiley> like it says Ubuntu 10.04 LTS evans-desktop tty1
[02:01] <teejis> is there a way to ssh into a ubuntu box, and then start a new x session, when someone is already logged into that ubuntu machine?
[02:01] <QpSmiley> evans-desktop login:
[02:01] <jimisrvrox> ok well this blows even worse...
[02:01] <jimisrvrox> cant ping the router!
[02:02] <m6d4> gnome-screensaver is locking up after you provide it with password, stays on the screen but you can rotate the cube on ubuntu 10.04
[02:02] <m6d4> anyone seen that ?
[02:02] <radi> lol
[02:02] <radi> gnome baker is damn quick
[02:02] <imprint> You got me, thanks, that worked
[02:02] <YankDownUnder> jimisrvrox, Just wondering - is the module for that adapter the proper one - or is there another mod that's interrupting it?
[02:02] <RevolLLJK> ok I'm in TTY, how do i launch into the login screen?
[02:02] <radi> startx
[02:02] <radi> ;p
[02:02] <hahas> lol
[02:02] <QpSmiley> radi will that work for me?
[02:03] <hahas> give a shot
[02:03] <radi> no idea, im not following your case ^^
[02:03] <QpSmiley> ahh well when you get a chance, can I tell you whats happening?
[02:03] <RevolLLJK> startx says x 0 server is already active, how can i kill it?
[02:03] <jimisrvrox> YankDownUnder: havent changed the module on the card and have been using this setup for a while now
[02:04] <jimisrvrox> but I think the driver might be broke if im running a static IP and still cant ping my router
[02:04] <jimisrvrox> but whats weird like I said on DHCP I could get an access point so idk
[02:05] <bastid_raZor> RevolLLJK: ctrl + C
[02:05] <uLinux> I've set tooltips_enabled to 0 but still there is alot of yellow popups. How can I hide/disable them?
[02:05] <bastid_raZor> RevolLLJK: kill the current running X or the startx command?
[02:05] <RevolLLJK> i'm in TTY right now so ctrl C doesnt work
[02:05] <RevolLLJK> yeah i escaped to TTY because my X server is broken right now
[02:05] <aaro700930> jimisrvrox Are you quite sure that wireless card are connected to your wl network?
[02:05] <RevolLLJK> autoboots to XBMC, and it doesnt work right
[02:06] <RevolLLJK> so i need to get to the login screen to change the startup to GNOME
[02:06] <Gryllida> Hi. How do I search for a file by a string inside of it? (Not its name)
[02:06] <aaro700930> jimisrvrox you can try to list wireless networks around you using iwlist "wlan0" scan
[02:06] <Vooloo> anyone know what the compiz effect that hides/shows all windows when you move mouse to a corner is named?
[02:07] <tyranos> Gryllida, grep string files , u can replace files with * for all files in dir
[02:07] <bastid_raZor> RevolLLJK: sudo service gdm stop   .. or sudo /etc/init.d/gdm stop
[02:07] <jimisrvrox> aaro700930: like I said as of 2 days ago it was working fine
[02:07] <RevolLLJK> that did it, thanks
[02:07] <aaro700930> jimisrvrox try iwlist
[02:07] <etotheipi> Vooloo: I believe it's called 'Show Desktop'.
[02:08] <etotheipi> http://wiki.compiz.org/Plugins/Showdesktop
[02:08] <Vooloo> etotheipi: I dont have that one anywhere
[02:08] <Vooloo> no wonder I cant find it
[02:08] <RevolLLJK> now i'm in GNOME as root... how can i get to the login screen? if I logout i go back to TTY
[02:08] <bazhang> Vooloo, you might also try in #compiz
[02:08] <speedbaron> hi.. i am having a hard time getting wifi to with 10.4.. contoller is AR5001
[02:08] <jimisrvrox> yeah its connected to the network
[02:08] <koshie> speedbaron, you can't use it ?
[02:08] <Gryllida> tyranos: what is grep?
[02:09] <jimisrvrox> RevolLLJK: which TTY are you in?
[02:09] <speedbaron> i can't
[02:09] <tyranos> Gryllida, do you know how to use commandline
[02:09] <koshie> You can't install a proprietary driver speedbaron ?
[02:09] <speedbaron> not supported?
[02:09] <etotheipi> Vooloo: try installing the plugin packs through apt
[02:09] <jimisrvrox> there are 6 TTY screens to get back into your login you would press F7
[02:09] <koshie> You don't have an icon near the systray ?
[02:09] <Gryllida> tyranos: ok I'll try 'man grep'
[02:09] <RevolLLJK> crap put it to sleep on accident
[02:09] <etotheipi> Vooloo: IIRC, they are compiz-fusion-plugins-main compiz-fusion-plugins-extra
[02:10] <etotheipi> the latter was moved to universe in Lucid
[02:10] <speedbaron> thx koshie
[02:10] <koshie> It works speedbaron ?
[02:10] <francis5> hey can anyone check the mootools effect on my site for me http://mnwebdesigns.co.uk
[02:10] <RevolLLJK> i was in TTY 1
[02:10] <francis5> need browser comaptibility
[02:10] <Vooloo> etotheipi: thank you, there it was
[02:11] <speedbaron> koshie.. should i download the proprietary driver?
[02:11] <darshakk> could someone help me fix my video problem? I'm new to ubuntu. mean not that "new"
[02:11] <koshie> speedbaron, I think so.
[02:11] <koshie> But speedbaron
[02:11] <koshie> It's a laptop ? You don't have a button (like FN + F2) to activate the wifi ?
[02:11] <jimisrvrox> aaro700930: it was connected statically and I took the interface down and put it back up
[02:11] <speedbaron> koshie, ubuntu 9.10 worked
[02:12] <jimisrvrox> and ran a scan and it showed nothing
[02:12] <koshie> speedbaron, see for the button.
[02:12] <speedbaron> its a laptop..  it's on
[02:12] <koshie> it's a laptop speedbaron ?
[02:12] <koshie> speedbaron, ok, and you have a proprietaty driver in the software ?
[02:12] <francis5> hey can anyone check the mootools effect on my site for me http://mnwebdesigns.co.uk
[02:13] <speedbaron> koshie i didn't need one for 9.10
[02:13] <Gryllida> !ot | francis5
[02:13] <koshie> speedbaron, really ?
[02:13] <koshie> Wait a minute
[02:13] <speedbaron> yes
[02:13] <speedbaron> it's a 10.04 problem
[02:13] <francis5> ok thanks
[02:13] <RevolLLJK> ok back in GNOME... how do i unlock the Login Screen Settings?
[02:14] <speedbaron> 8.04 ~ 9.10 worked
[02:14] <Salvad1> Hello. I installed another Ubuntu system on another partition of my hard disk drive and the computer boots the newly Ubuntu installation. Is there some way to configure GRUB to boot automatically to the old system?. Thanks.
[02:14] <Gryllida> RevolLLJK: system > administration > login screen
[02:14] <koshie> speedbaron, I'm searching on ubuntu-fr a solution
[02:14] <speedbaron> koshie.. 8.04~9.10 worked
[02:14] <RevolLLJK> yes I'm in that right now
[02:14] <koshie> I've see
[02:14] <speedbaron> thx
[02:14] <darshakk> hii... Can someone help me with my video playback problem?
[02:14] <RevolLLJK> But to be able to change it I have to click the 'unlock' button
[02:14] <RevolLLJK> But it does nothing
[02:14] <koshie> Erk, wiki don't work
[02:14] <koshie> doesn't*
[02:15] <Gryllida> !details | darshakk
[02:16] <mssever> After sabayon-apply hosed my machine, how can I restore it? Details here: https://bugs.launchpad.net/ubuntu/+source/sabayon/+bug/592489
[02:16] <koshie> an other guys have your problem speedbaron
[02:16] <speedbaron> ok..
[02:16] <speedbaron> do u have a url?
[02:16] <koshie> http://ubuntuforums.org/showthread.php?t=1407397&highlight=AR5001 speedbaron in english
[02:17] <koshie> You'd to made yourself (madwifi) speedbaron
[02:17] <koshie> If I've understand.
[02:17] <francis5> bastid_raZor can you check it now please
[02:18] <speedbaron> ok.. i have to check that out koshie
[02:18] <koshie> ok
[02:18] <koshie> it's your problem ?
[02:18] <koshie> speedbaron,
[02:18] <speedbaron> yes koshie
[02:18] <QpSmiley> Okay looks like my graphics driver knocked out my Gnome Desktop Manager.... when I turn on my computer it attempts to load up then it bugs out and I get send to a tty1 page(idk if thats the name for it it basically is a DOS interface) then it is basically terminal no proper login screen
[02:18] <koshie> ok
[02:18] <QpSmiley> what should I do now?
[02:18] <jimisrvrox> aaro700930: iwlist scan sees my network but I cant ping the router even on a static IP
[02:19] <HowdyDoody> In middle of upgrade to 0.04 my keyboard stopped keying.    After a bunch of key banging the Ctrl-Alt-Del key starts to work suddenly.  BAH now I've rebooted and it seems to be hung at ubuntu with the 5 dots.   How to recover ?    ---> I tried:  trl-alt-F1 login and sudo do-release-upgrade......    I got: checking for new ubuntu release  .....    no release found   > What can I try next  to get the upgrade back on track ?
[02:19] <Tniffoc> What format should I convert my AVCHD files into in order to edit them with Vegas 2010 and not lose much quality
[02:19] <Tniffoc> ?
[02:19] <brand0n> anyone have a problem with randomly crashing to login terminal on boot
[02:19] <brand0n> since upgrade
[02:19] <mssever> QpSmiley: If you look at the file ~/.XSession-errors, you'll probably find some info about what went wrong
[02:19] <brand0n> if i do sudo gdm it fixes it fine but i was just wondering if anyone else has the problem
[02:20] <koshie> Good night
[02:20] <QpSmiley> I'm rather new to ubuntu ... how do i do that?
[02:20] <QpSmiley> I typed in Xstart and it said
[02:20] <mssever> QpSmiley: after logging in, type "less ~/.XSession-errors"
[02:21] <bastid_raZor> brand0n: you've probably borked some setting.. create a newuser and see if that fixes things.
[02:21] <QpSmiley> (EE) NVIDIA(0): could not open the device file /dev/nividia0 (input/output error).
[02:21] <QpSmiley> then it also said
[02:21] <brand0n> it crashes before the user
[02:21] <bastid_raZor> brand0n: you can add the new user to have sudo rights by adding them to the admin group:: sudo adduser newuser admin
[02:21] <brand0n> i didnt bork anyting, i upgraded to 10.04
[02:21] <brand0n> welel the thing is it doesnt do it everytime
[02:21] <QpSmiley> (EE) Screen(s) found but none have a usable configuaration
[02:21] <brand0n> id say 7 out of 10 times
[02:21] <brand0n> it does it
[02:21] <brand0n> and a simple sudo gdm fixes it
[02:21] <jimisrvrox> Does anybody think that the driver is borked because of not being able to ping my router even on a static IP?
[02:22] <mssever> brand0n: I don't think there's a way to restart an upgrade. You'll just have to use the command-line tool aptitude to try and recover
[02:22] <QpSmiley> I'll try that msserver
[02:22] <brand0n> mssever theres no problem at all with the upgrade, besides sometimes it goes to the terminal instead of logging into the gui
[02:22] <brand0n> and all i do is sudo gdm
[02:22] <brand0n> and it fixes it
[02:22] <brand0n> so it cant be some serious problem
[02:22] <FloodBot4> brand0n: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[02:22] <brand0n> floodbot, please stfu
[02:23] <mssever> brand0n: I think I replied to the wrong person. Sorry
[02:23] <brand0n> dont type a paragraph to tell me to stop typing paragraphs
[02:23] <bastid_raZor> !enter | brand0n
[02:23] <mssever> After sabayon-apply hosed my machine, how can I restore it? Details here: https://bugs.launchpad.net/ubuntu/+source/sabayon/+bug/592489
[02:23] <thompa> why is irc support so hard to get to now?....arg
[02:23] <bastid_raZor> brand0n: also using sudo gdm bypasses all your user settings for gnome. that would be why things run differently
[02:24] <therianthrope> Hiya - with dual booting (grub as primary bootloader) is it possible to use Windows 7 BitLocker? I would assume so considering windows is chainloaded, but want to double check.
[02:24] <mssever> I usually start gdm thus: sudo service gdm start
[02:24] <jimisrvrox> mssever: do you think my wireless driver is borked? I dont see how it could be considering iwlist scan sees my network but yet I cant ping the damn router even with a static IP
[02:24] <thompa> anyway. anyone got a dula graphic card switch like stamina/speed on laptop
[02:24] <YankDownUnder> jimisrvrox, Sorry - been busy - what's the driver yer usin?
[02:25] <mssever> jimisrvrox: I don't know too much about wireless troubleshooting. Sorry.
[02:25] <zaiya> how come I get jaggy horizontal lines when moving windows using metacity but not when using mutter (or compiz) ?
[02:25] <Tniffoc> What format should I convert my AVCHD files into in order to edit them with Vegas 2010 and not lose much quality?
[02:26] <jimisrvrox> YankDownUnder: im using the b43/ssb driver and it has been working before 2 days ago...set it to a static IP and cant ping the router but iwlist scan sees my network...this seems very strange to me because being said that iwlist sees the network then I dont think the driver would be borked que no?
[02:26] <imperius1> jimisrvrox: check "iwconfig wlan0". are you connected to your router?
[02:26] <jimisrvrox> YankDownUnder: and I tried rmmod/modprobe..that didnt work either
[02:26] <mssever> After sabayon-apply hosed my machine, how can I restore it? Details here: https://bugs.launchpad.net/ubuntu/+source/sabayon/+bug/592489
[02:26] <jimisrvrox> imperius1: I cant ping the router! but iwlist scan sees the network
[02:27] <Benny_132> hi all, quick question, is there a way to have VMware Player automatically start and load my VM after a reboot ?
[02:27] <mssever> Benny_132: put it in your startup programs
[02:27] <imperius1> jimisrvrox: your router might be set up to not allow pinging. it's actually a smart move security-wise.
[02:28] <mssever> Benny_132: or, if you want to launch it prior to login, you can put it in /etc/rc.local
[02:28] <The_Journey> why do I keep getting input/output error when I try to install ubuntu 10.04?
[02:28] <YankDownUnder> jimisrvrox, What you might try to do is to just blow out ANY settings for that card that you can find - in the /etc/peers dir as well - rmmod the driver first - then double check each of the config dirs - also check the blacklist.conf just to be sure...then modprobe the driver again - see if you can force the settings
[02:28] <jimisrvrox> imperius1: I can ping it on my windoze box but now that you said that Im gonna see if I can disallow pinging hehe :)
[02:28] <gtoy> Hi I installed 10.04 but my screen goes black at startup is anyone familiar with graphic card issues? I have an intel 828656G
[02:28] <Jordan_U> The_Journey: Did you run the CD integrity check?
[02:28] <darshakk> Hi all, how can I redirect video from an application on my screen? I can hear audio, but can't see a video. e.g. from minitube, veetle plugin etc
[02:28] <The_Journey> Jordan_U: yes
[02:28] <brand0n> i just tried changing my account from custom to administrator
[02:28] <brand0n> maybe that will help
[02:29] <brand0n> also, brasero keeps stopping at 4447mb of 4453mb....anyone ever have that problem?
[02:29] <brand0n> i generaly use devede for converting video but it seems to compress them ridicuouslyl small
[02:29] <brand0n> id rather an iso use the whole dvd rather than 1.8 to 2.5gb
[02:30] <therianthrope> Hiya - with dual booting (grub as primary bootloader) is it possible to use Windows 7 BitLocker? I would assume so considering windows is chainloaded, but want to double check
[02:30] <Benny_132> mssever: ok cool
[02:30] <jimisrvrox> YankDownUnder: well unfortunately for me im not that familar with the linux directory setup even though ive been using linux now for about 2 yrs and took a linux class but most of that info has gone out of the brain...but now im doing CCNA and ive had problems with these da** broadcom cards in the past with nm-applet and so forth and I had it documented somewhere how I fixed it but havent a...
[02:30] <jimisrvrox> ...clue as to where its at
[02:30] <bastid_raZor> brand0n: its the quality of the avi you're starting with.. i convert mkv's and they tend to be around 3.2GB
[02:31] <QpSmiley> msserver : it told me that blahblahblah /evans/.XSession-errors wasn't a file
[02:31] <brand0n> yea but i remember using a program on windows called convertxtodvd
[02:31] <_mike__> Ive been googling around and couldnt find a decent answer to my problem... Ubuntu doesnt show correctly on Inspiron 2600's did anyone come across a decent fix?
[02:31] <bastid_raZor> brand0n: :\ windows != ubuntu
[02:31] <jimisrvrox> bastid_raZor: hehehe
[02:31] <brand0n> bastid_raZor, when i used convertxtodvd on windows it didnt matter if it was a 700mb avi or a  1.4gb one it ended up making it fit on the dvds max size
[02:31] <benkong2> why is and apt-get dist-upgrade removing all the kde stuff in my lucid ubuntu?
[02:31] <QpSmiley> but I tried running sudo gdm and it said Unable to load file /etc/gdm/custom.conf and it also said Unable to find users no seat-id found
[02:31] <brand0n> is the point im trying to make
[02:31] <YankDownUnder> jimisrvrox, Mate, been there with the Broadcom's before...had to do the same - blow everything out - several times recompile the driver by hand...
[02:31] <mssever> QpSmiley: maybe I remembered the name incorrectly. If you do "ls -A" you'll get a full directory listing. Look for a similar file
[02:31] <The_Journey_> Why do I get the error input / output error when I try to install ubuntu?
[02:31] <brand0n> and brasero is attempting to do the same thing as well
[02:32] <brand0n> but it just locks up at the end
[02:32] <b2bwild> bastid_raZor: its Windows < Ubuntu actually.
[02:32] <QpSmiley> okay
[02:32] <brand0n> the app itself doesnt freeeze, it just stops
[02:32] <Dr_Willis> The_Journey_:  bad cd, bad disk, filesystem/drive errors.
[02:32] <The_Journey_> Dr_Willis: every other linux OS works though
[02:32] <jimisrvrox> YankDownUnder: oh god sounds horrible! and the thing about it is I wanted to boycott Linksys for their crappy chipsets that just dont play well with linux now im actually happy that a power outtage blew out one of my usb wireless cards hahaha
[02:32] <mssever> The_Journey_: There are many possibilities
[02:33] <con-man> does anyone know how to get the quickcam orbits motors working in linux, like making it point up down turning sideways?
[02:33] <Jordan_U> The_Journey: Could you pastebin the output of "dmesg" after the IO error?
[02:33] <jimisrvrox> YankDownUnder: wasted $40 on the card but feels nice to fry their crap if you know what i mean
[02:33] <Dr_Willis> The_Journey_:  give more information about what you are doing. Its very possible its having issues reading the optuical drive/disk
[02:33] <The_Journey_> Dr_Willis: I'm trying to install ubuntu 10.04 using a cd
[02:33] <YankDownUnder> jimisrvrox, Actually, ain't all that bad - the last bc driver I installed (on this laptop) worked heaps better than the one that came with the install...so, on that note...
[02:33] <jimisrvrox> hrm
[02:33] <jimisrvrox> interesting
[02:34] <The_Journey_> Dr_Willis: why would there be problem with my optical drive though, my other livecds work
[02:34] <Dr_Willis> The_Journey_:  if you burnt the cd - uit could be a bad burn, try burning it at the lowest speed the disk can do. or try making a bpptable flash drive
[02:34] <Dr_Willis> The_Journey_:  ive seen (and have) optical drives that cazn be a little flakey.
[02:34] <The_Journey_> Dr_Willis: I did checksum after burning the disk
[02:34] <jimisrvrox> YankDownUnder: well I have no exp in compiling drivers by hand....
[02:34] <Dr_Willis> The_Journey_:  I use bootable flash drives these days, Faster to install and less hassles.
[02:34] <jimisrvrox> YankDownUnder: I wanted to get the book Ubuntu Toolbox the other day but im over here pinching pennies right now
[02:34] <YankDownUnder> jimisrvrox, Something to try, as well, is to stick another card in it - leave the bc card there, blacklist the driver, and try to "Find Hardware Drivers" again to see if that'll blow it out for ya...
[02:35] <Dr_Willis> The quality of Optical drives and media seems to have gotten a lot worse over the last few years.
[02:35] <YankDownUnder> jimisrvrox, :) - yeah - I fully understand the penny pinchin bit mate
[02:35] <Jordan_U> The_Journey_: Try running the check from the CD's boot menu. That will rule out a bad CD or a bad drive (or a combination of the two)
[02:35] <The_Journey_> Dr_Willis: is there anyway to fix this because I don't have an usb
[02:35] <jimisrvrox> YankDownUnder: ok sounds good I can try that but I think I might have the same version of card but im not sure
[02:35] <Dr_Willis> The_Journey_:  i mentioned burning the disk at the slowest speed the drive can handle.
[02:36] <Dr_Willis> The_Journey_:  use siome compressed air and clean out the drive also might help
[02:36] <The_Journey_> Dr_Willis: I did the checksum after the burning, so the burning was successful
[02:36] <sri> is there a way to get network manager to change stuff like network proxy depending if you're at work or at a home network?
[02:36] <Diegooo--> Hola
[02:36] <jimisrvrox> YankDownUnder: mind if I pm then?
[02:36] <The_Journey_> Dr_Willis: like I said, every other livecds work except the ubuntu one though
[02:36] <_mike__> con-man this might help http://www.quickcamteam.net/search?SearchableText=linux
[02:36] <Diegooo--> una pregunta
[02:36] <Diegooo--> se actualizo el kernel de la version 9.04 a la version 10.04 de ubuntu ?
[02:36] <Zeu5> hi i have read the cronhow to documentation. and i have set up a cron job using a gnome task scheduler. i manually run the command via gnome task scheduler it will open a terminal window that executes a svn update command. i set it to every minute. but i have not seen the terminal window appearing every minute. how do i test to know that it works?
[02:36] <Dr_Willis> The_Journey_:  im giving you 'standard' things to try. theres no magic fix.
[02:36] <bastid_raZor> sri: set up profiles in nm-applet
[02:36] <The_Journey_> Dr_Willis: so it's not my optical drive
[02:36] <sri> bastid_raZor: cool.. I'll check that out.
[02:37] <sri> bastid_raZor: what about if you activate a vpn?  still will fix it?
[02:37] <Dr_Willis> The_Journey_:  burn at slowest speed  is  often a fix. Dont ask me why.
[02:37] <jimisrvrox> bastid_raZor: hey what you think of Windoze 7? I know theyre the evil empire but what do you think about it as an OS?
[02:37] <QpSmiley> msserver: it basically said it couldn't find the session file and then a bunch of stuff that didn't look human
[02:37] <bastid_raZor> sri: you can have vpn profiles as well.
[02:37] <The_Journey_> Dr_Willis: if the burning didn't work, then the checksum would have failed
[02:37] <jimisrvrox> YankDownUnder: mind if I pm then?
[02:37] <Zeu5> hi i have read the cronhow to documentation. and i have set up a cron job using a gnome task scheduler. i manually run the command via gnome task scheduler it will open a terminal window that executes a svn update command. i set it to every minute. but i have not seen the terminal window appearing every minute. how do i test to know that it works?
[02:37] <QpSmiley> btw its /.xsession.errors
[02:37] <sri> bastid_raZor: is there a link to an article or something that i can get more information?
[02:37] <bastid_raZor> jimisrvrox: i've used it once, had no real opinion on it.
[02:38] <YankDownUnder> jimisrvrox, Go for it mate
[02:38] <brand0n> anyone use devede?
[02:38] <bastid_raZor> sri right click the icon in the top bar, edit connections. let me look for a howto
[02:38] <Dr_Willis> The_Journey_:  with your logic then - the thing should work.. so what else are you going to try..  takes 0 min to reburn the disk at  the slowerst speed. and another few sec to give the drive a hit of comopressed air. also you could double check the cables.
[02:39] <drizzt_> is there a way to limit physical memory in Ubuntu?
[02:39] <Dr_Willis> The_Journey_:  try the disk in other pc's as a test also i guess
[02:39] <Dr_Willis> but that wont help the problem pc.
[02:39] <Vooloo> is there a way to get Gnome Do for 10.04 ?
[02:39] <maco> drizzt_: to tell it to only use a certain amount and pretend the rest's not there?
[02:39] <Dr_Willis> Vooloo:  its in the repos I think
[02:39] <drizzt_> Vooloo, it is in it
[02:39] <maco> drizzt_: boot with "mem=512m" or whatever
[02:39] <Jordan_U> The_Journey_: It can be a combination of a slightly bad disk and a poor drive. I've had CDs that checksumm'd fine on drive A, but not on drive B. While drive B could read other CDs fine.
[02:39] <drizzt_> cool
[02:40] <Zeu5> hi i have read the cronhow to documentation. and i have set up a cron job using a gnome task scheduler. i manually run the command via gnome task scheduler it will open a terminal window that executes a svn update command. i set it to every minute. but i have not seen the terminal window appearing every minute. how do i test to know that it works?
[02:40] <The_Journey_> Dr_Willis: I have a music player that stores music files, could I use that as a usb to install Ubuntu?
[02:40] <Dr_Willis> Jordan_U:  im on my 3rd optical drive for my main box.  Just cant seem to get ones that can last these days
[02:40] <Dr_Willis> The_Journey_:  doubtfull.
[02:40] <brand0n> can anyone explain to me why in DeVeDe i add an avi file and it will say like 120% disk usage but when its done converting the iso is like 2.0gb?
[02:40] <CaptainTrek> The_Journey_:  i don't recommend it.
[02:40] <Dr_Willis> The_Journey_:  if it can me made 'bootable' it might work. but i wouldent guiarentee that
[02:40] <The_Journey_> Dr_Willis: Isn't it just an external storage too?
[02:41] <bastid_raZor> sri: https://help.ubuntu.com/community/NetworkManager0.7?highlight=(nm\-applet)   it doesn't talk about vpn but you will get the general idea on how to use nm-applet
[02:41] <CaptainTrek> The_Journey_:  not quite, sometimes the thing has its own software hiding somewhere on the storage partition(s)
[02:41] <The_Journey_> I thought a music player is an external storage with drivers to play mp3's files?
[02:41] <Jordan_U> Dr_Willis: With grub2's iso booting I hardly ever need a physical CD any more :)
[02:41] <Dr_Willis> brand0n:  its goofy :) ive seen that also. click on the  button to the left of the  120% gague to get it to resize/recalculate. and it seems to give a more proper answer
[02:41] <sri> bastid_raZor: thanks!
[02:41] <CaptainTrek> The_Journey_:  it depends on the music player/device.
[02:41] <jdsbluedevl> hi, I'm having a major problem.  I just reinstalled Ubuntu from scratch on my computer, and now I can't get an Ethernet connection working.  Can someone help me?
[02:41] <bastid_raZor> sri: best of luck
[02:41] <Dr_Willis> Jordan_U:  Yep. same here. About ready to remove my flakey optical drive and put in another TB hd.
[02:42] <Costanza> does anyone know how to fix this on ubuntu: configure: error: could not find DocBook XSL Stylesheets in XML catalog , i found something by googling but it does not work on ubuntu (Fix:     apt-get install docbook-style-xsl)
[02:42] <The_Journey_> CaptainTrek: I have a Sly P3 Digital Player, would that work as a usb to install ubuntu?
[02:42] <Dr_Willis> Jordan_U:  burnt some cd's for a friend (ubuntu) and went to check summ them and they all 3 failed with IO errors :( couldent even md5sum them
[02:42] <Jordan_U> Dr_Willis: I used to always have hundreds of old Distro pre-release coasters lying around, along with a few dead flash drives :)
[02:43] <CaptainTrek> The_Journey_:  in my experience, installing a linux partition to a music player / MP3 playing device has bad after-effects.
[02:43] <The_Journey_> CaptainTrek: like what?
[02:43] <The_Journey_> CaptainTrek: does it just not work?
[02:43] <QpSmiley> Anyone else want to take a crack at how to fix my problem?:  I enabled my graphics card driver and it starts up in the terminal login screen instead of the gdm anyone want to take a crack at it?
[02:44] <OldPete> brand0n: I've noticed other apps that rely on DVDAuthor that have that same problem.  I haven't researched it, but I suspect it's something wrong in the reporting in that or one of the apps it relies on.
[02:44] <CaptainTrek> The_Journey_:  i'm unfamiliar with the device you mentioned, but most of those devices cannot, I repeat, CANNOT handle the ext3/ext4 partitions used by linux, thus preventing you from using the MP3 player to listen to music.
[02:44] <jdsbluedevl> hi, I'm having trouble getting an Internet connection with my fresh Ubuntu install.  Can someone help me?
[02:44] <glorious__> I just want to say earlier today I asked about trying to connect from tsclient on 10.04 to a Vista machine. I got an error and couldn't figure it out.
[02:44] <Jordan_U> QpSmiley: "sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf-bak" should get GDM starting again, but I can't help much with getting the proprietary drivers working.
[02:45] <juan_> do u guys know if there is an app that will make the state of ur current OS into an ISO image and then later on u can install it and have it like u had it then?
[02:45] <sri> bastid_raZor: not quite what I was looking for.. what I wanted to do was change like my firefox proxy, my apt proxy etc etc.
[02:45] <therianthrope> Why isn't my question being answered?
[02:46] <glorious__> But just now I discovered TeamViewer has a Linux client/server free for personal use. Wayyyy simple.  Worked right off.  i'll still try to figure out the FLOSS tools at some point, but for now at least I'm up and running.
[02:46] <sri> bastid_raZor: there was a tool that did something like this written by Ross Burton I just can't remember what it was.
[02:46] <QpSmiley> thank you Jordan_U will give it a try
[02:46] <tyranos> therianthrope just post your question again and wait
[02:47] <Shade57> Has anyone been having trouble sharing files between windows and linux through a fat32 partition?
[02:47] <therianthrope> Hiya - with dual booting (grub as primary bootloader) is it possible to use Windows 7 BitLocker? I would assume so considering windows is chainloaded, but want to double check
[02:47] <glorious__> This tool (TeamViewer) could be useful for giving support here. No brainer simple.
[02:47] <jdsbluedevl> can anyone here help me get my Internet connection working?  I plug in my Ethernet cable, Ubuntu tries hard to connect, and then ultimately times out
[02:47] <Jordan_U> QpSmiley: You're welcome.
[02:48] <Zeu5> hi i have read the cronhow to documentation. and i have set up a cron job using a gnome task scheduler. i manually run the command via gnome task scheduler it will open a terminal window that executes a svn update command. i set it to every minute. but i have not seen the terminal window appearing every minute. how do i test to know that it works?
[02:49] <The_Journey_> why do I get not authorized error when I try to plug in an external usb?
[02:49] <tyranos> therianthrope,  http://itcrumbs.blogspot.com/2010/05/ubuntu-on-bitlocker-protected.html
[02:49] <Traveler> hi
[02:50] <Traveler> I've installed xmonad on ubuntu but when I chose the xmonad session it doesn't load it. Just stays at the gdm screen. Why?
[02:50] <bastid_raZor> sri: ah, i do not know how to do what you're wanting.
[02:50] <jdsbluedevl> ok, I'm begging someone to help me with my Internet connection issue
[02:50] <sri> bastid_raZor: that's cool. I knwo someone has written something.. basically you want to autoconfig your laptop to not have any dependencies on your work network and vice versa.
[02:50] <Dr_Willis> Traveler:  try the xterm session and load xmonad by hand. there could be some config issues with xmonad.
[02:51] <therianthrope> Tyranos: Win7 and Ubuntu are already installed - safe to encrypt?
[02:51] <Zeu5> hi i have posed my questions 3 times in a row without a response while googling non stop to see how my issue can be resolved. does anyone with experience with cron help me?
[02:51] <tyranos> therianthrope, i dont know anything about bitlocker i first heard of it when you asked :) sry but cant help you there
[02:52] <tyranos> therianthrope, but maybe someone else can, read that article first
[02:52] <Traveler> Dr_Willis: Config issues with xmonad ? Xmonad works like a charm on other distributions so I doubt it.
[02:52] <QpSmiley> okay ... well that didnt work Jordan_U
[02:52] <Traveler> Anyone in here running xmonad ?
[02:52] <machine_> Ola!
[02:52] <bastid_raZor> Traveler: possibly look in .xsession-errors for possible errors
[02:52] <machine_> Algum Brasileiro ?
[02:52] <Dr_Willis> Traveler:  one way to find out.. try loading it by hand.. look for error messages
[02:53] <jdsbluedevl> does ANYONE here have experience with an Ethernet card that won't connect to the Internet?
[02:53] <Zeu5> hi i have read the cronhow to documentation. and i have set up a cron job using a gnome task scheduler. i manually run the command via gnome task scheduler it will open a terminal window that executes a svn update command. i set it to every minute. but i have not seen the terminal window appearing every minute. how do i test to know that it works?
[02:53] <brand0n> anyone who converts movies alot: ffmpeg or mencoder?
[02:53] <jdsbluedevl> machine_: solamente ingles
[02:53] <holmser_> anyone have experience with a pxe install?
[02:53] <Shade57> I dont know if this will be helpful to anyone or not, but you can create a fat32 partition on a dual-boot system (i used Windows 7 to create the partition) and use that to share files between Linux/Ubuntu (im using Backtrack 4) as long you have it setup as Shared in Windows.
[02:54] <brand0n> mencoder seems to compress stuff way more than necessary when converting to dvd, ffmpeg seems to focus more on quality than compression
[02:54] <UBUNTUnoCD> How to set grub, so the text based ubuntu inatalator will not look for CD but it will take hd0,10 as a cdrom ?
[02:54] <Jordan_U> !patience | jdsbluedevl
[02:54] <QpSmiley> Jordan_U : I entered it .. no confirmation that it worked so then i tried to Ctrl+alt+f7 then that came up with a screen that had something about an AppArmor profile so i guess that didn't work then i forced shutdown then i entered it again and it said it couldnt stat xorg.conf
[02:54] <jdsbluedevl> yeah, but it feels so simple it's stupid, and for some reason I can't figure it out
[02:54] <Jordan_U> QpSmiley: What version of Ubuntu?
[02:54] <QpSmiley> 10.04
[02:54] <Jordan_U> UBUNTUnoCD: What are you trying to accomplish?
[02:55] <Dr_Willis> brand0n:  both have 2000+ settings you can try and work with differnt codecs. So its all a matter of what you want to do.
[02:55] <UBUNTUnoCD> I can run ubuntu instalator from Grub, but how set grub, so the text based ubuntu inatalator will not look for CD but it will take hd0,10 as a cdrom ?
[02:55] <UBUNTUnoCD> Jordan_U, copy instlall CD to hda11 and intall it from there
[02:55] <brand0n> Dr_Willis, ive used DeVeDe for awhile and it always compresses movies to a retarded degree (whether its a 700mb avi or 1.4gb avi it comes out to be around 2gb iso)
[02:55] <brand0n> id rather it use all of the dvd and be better quality
[02:56] <Dr_Willis> brand0n:  play with the settings then.
[02:56] <tyranos> UBUNTUnoCD,  i managed once to install from the  ubuntu alternate-cd as an iso from my harddrive, but i think what you want is different
[02:56] <UBUNTUnoCD> tyranos, I use alternate CD for minimal install, all sowteare needs to be installed manually
[02:56] <Jordan_U> UBUNTUnoCD: What is your end goal? See: http://catb.org/~esr/faqs/smart-questions.html#goal
[02:57] <tyranos> UBUNTUnoCD, so what i understand is that you have no cd player but wish to install from an iso am i correct ?
[02:57] <tyranos> UBUNTUnoCD, i mean no cdrom drive
[02:57] <Zeu5> hi i have read the cronhow to documentation. and i have set up a cron job using a gnome task scheduler. i manually run the command via gnome task scheduler it will open a terminal window that executes a svn update command. i set it to every minute. but i have not seen the terminal window appearing every minute. how do i test to know that it works?
[02:58] <gonzoBLUE> hi all
[02:58] <UBUNTUnoCD> tyranos, yes
[02:58] <QpSmiley> is there a command to isntall the default graphics driver?
[02:58] <maco> Zeu5: run "top" and see if it pops up?
[02:58] <hiexpo> !hi | gonzoBLUE
[02:58] <aaroninfidel> anyone here use neatx?
[02:58] <aaroninfidel> I don't know how to restart it.
[02:58] <tertl3> Zeu5: did you add the correct letters
[02:58] <jdsbluedevl> can anyone here help me get my Internet connection working?  I plug in my Ethernet cable, Ubuntu tries hard to connect, and then ultimately times out
[02:59] <Zeu5> maco: what do you mean by run "top"?
[02:59] <Roky> Does anyone here have a laptop with a core i3 or i5 succesfully running on any variation of *nix?
[02:59] <UBUNTUnoCD> Jordan_U, I boot alternate installer from hda11 , but it looks for CD and can not install, I guess I have to add some grub option, so the installator will know where are the installation files.
[02:59] <tertl3> i did a crontab @reboot and I got it working after some trouble
[02:59] <UBUNTUnoCD> tyranos, my CDrw is unreadable
[02:59] <tyranos> UBUNTUnoCD, and youo cant boot off a usb key or flash drive ?
[02:59] <gonzoBLUE> man I love lubuntu
[02:59] <Jordan_U> UBUNTUnoCD: Please read the link that I gave you.
[03:00] <Zeu5> tertl3: what do you mean by add the correct letters? i run the scheduled task manually within gnome-scheduler.it works so  i dun understand why the scheduler does not work
[03:00] <UBUNTUnoCD> tyranos, I do not have it
[03:00] <Zeu5> tertl3: please elaborate how you got crontab to work
[03:00] <RondoRaven> after changing kernels I have lost my splash screen. does anybody know how to fix?
[03:00] <Zeu5> tertl3: thank you very much
[03:00] <UBUNTUnoCD> Jordan_U, I responsed as the given exaple is, on that link. :) what could be improved :) ?
[03:00] <gonzoBLUE> apt-get install gdm  I believe
[03:01] <tertl3> Zeu5: someone walked me through it but hang on I'll try to find it
[03:01] <maco> Zeu5: the top command shows what commands are running
[03:01] <zkw> hello
[03:01] <tyranos> Jordan_U, you waisted my time
[03:01] <tyranos> :P
[03:02] <nibblyn> jdb_,
[03:02] <UBUNTUnoCD> tyranos, I had no problem with arch about that :-D
[03:02] <UBUNTUnoCD> Jordan_U, I had no problem with arch about that :-D
[03:02] <tertl3> Zeu5: here it is to run irssi at boot up  @reboot sleep 50 && screen -d -m -S irssi irssi
[03:02] <Jordan_U> UBUNTUnoCD: "booting the alternate installer from hda11" is still a step, not a goal. I assume, for example, that you want to install Ubuntu, and there is something stopping you from doing that normally by booting from CD.
[03:02] <Zeu5> maco:  i run top but i see nothing that looks like svn update OR gnome-schedule or cron
[03:03] <bastid_raZor> tertl3: you have to use /full/paths/to/command in cron
[03:03] <UBUNTUnoCD> Jordan_U, yes, no CD , no usb drive
[03:03] <jdsbluedevl> can anyone here help me get my Internet connection working?  I plug in my Ethernet cable, Ubuntu tries hard to connect, and then ultimately times out
[03:03] <tertl3> bastid_raZor: it works
[03:03] <maco> Zeu5: hmm in that case maybe: while [1] ; do ps -ef | grep "svn" ; done
[03:03] <Zeu5> tertl3: i am trying to run a svn update. my command as i have mentioned just now is working because i run it manually. i am just stumped as to why it appears not to be running every minute as i planned. do you have an insight into this?
[03:04] <tyranos> UBUNTUnoCD, it is possible i did it once on my old computer with broken cd rom, ijust cant find that guide
[03:04] <pvl1> i cant get a second hd to mount as 777, i tried using pysdm and that was no luck
[03:04] <tertl3> Zeu5: no, I think you have typed something incorrectly or left something out of your command
[03:04] <Zeu5> bastid_raZor: tertl3 was trying to help me with my cron issue. which i deeply appreciate. do you have any insights as to how i can get my scheduled tasks to work?
[03:05] <crf> hi, when I don't use the computer for ten minutes, I have the screen set to go blank. When I come back, it asks me for my password
[03:05] <tertl3> Zeu5: try #ubuntu-offtopic
[03:05] <crf> How do I stop it asking for my password?
[03:05] <tertl3> crf, screensaver
[03:05] <joshmuffin> Hello, is anyone free to lend me a hand with conky?
[03:05] <Jordan_U> UBUNTUnoCD: The absolute easiest method is to boot the netboot installer (which is just a kernel and initramfs)
[03:05] <crf> hi tertl3, could you explain a bit more?
[03:06] <tertl3> crf, so to screensaver settings and try to change it
[03:06] <Zeu5> tertl3: i disagree. but you may be right. here it is : svn update /opt/lampp/htdocs/wp
[03:06] <shodan45> would burning an ubuntu cd iso onto a dvd work?
[03:06] <Zeu5> tertl3: i go post in offtopic as well. i hope it works
[03:06] <QpSmiley> How can I disable the graphics driver I enabled that screwed up my gdm?
[03:06] <tertl3> Zeu5: what about the interval?
[03:06] <merma> shodan45, yes
[03:06] <tyranos> UBUNTUnoCD, http://www.ubuntugeek.com/install-ubuntukubuntuedubuntuxubuntu-without-cdrom-drive.html
[03:06] <crf> ok tertl3, I'll look, thanks.
[03:06] <shodan45> merma, ty
[03:06] <Jordan_U> UBUNTUnoCD: I think that the installer might complain if it's booted from the same drive you're installing to, even if you aren't modifying the particular partition it's on.
[03:06] <nibblyn> jdsbluedevl, so this is a fresh install? which means it worked before?
[03:06] <tyranos> Jordan_U, it is possible i didnt check the link i posted
[03:07] <jdsbluedevl> nibblyn: yes
[03:07] <tyranos> Jordan_U, it is possible i did it, check the link i posted
[03:07] <joshmuffin> can anyone help me with conky?
[03:07] <nibblyn> jdsbluedevl, do you use a router?
[03:07] <jdsbluedevl> nibblyn: although I was having issues with my second Ethernet card when trying to set up an ICS, which is why I did a clean install, but I digress
[03:07] <jdsbluedevl> nibblyn: no
[03:07] <bastid_raZor> joshmuffin: ask in the channel, someone may be able to help
[03:08] <tyranos> joshmuffin, go to the #conky channel
[03:08] <joshmuffin> @bastid RaZor: no one is replying
[03:08] <Zeu5> tertl3: i dont quite understand your instruction but i think you meant this: * * * * * svn update /opt/lampp/htdocs/wp # JOB_ID_1
[03:08] <jdsbluedevl> I've seen the issue a few times in the forum, but I haven't seen how it was solved.  All of them were left hanging
[03:08] <jdsbluedevl> nibblyn: I've seen the issue a few times in the forum, but I haven't seen how it was solved.  All of them were left hanging
[03:08] <bastid_raZor> joshmuffin: i haven't seen you ask an actual question in this channel.
[03:09] <blackscreen> I can boot only when I edit the grub by replacing quiet splash by nomodeset..
[03:09] <xyzaffair> using the broadcom STA propriatery in 10.04 but getting poor signal strengths / slow transfers about 1.5mbs at best and im sitting next to an N router, any ideas?
[03:09] <achester> Hey quick question, trying to install some packages non-interactively. I found this for skipping whiptail dialogs but is there some way to pass along what to chose to whiptail? http://snowulf.com/2008/12/04/truly-non-interactive-unattended-apt-get-install/
[03:10] <SirMoo> Funny to see someone post one of Snowulfs articles in here!
[03:11] <achester> Why's that? =p it was one of the first google results I found haha
[03:11] <sdorand> anyone know if vimeo uses a CMS for their overall templating, etc?
[03:11] <nibblyn> jdsbluedevl, that's seems to be too complicated for my knowledge, sorry, try to describe your problem in a specific way, your last sentence was much better that saying "I can't connect", they will pick you up
[03:12] <SirMoo> Ehh. I know 'em from another IRC. Did not know he was that well indexed.
[03:12] <aaroninfidel> anyone use EC2?
[03:12] <jdsbluedevl> ok, let me try this again.  I made a clean install of Ubuntu Lucid, but cannot get a connection to the Internet.  The network manager times out every time I plug the Ethernet cable in.  Can someone please help me resolve this?
[03:13] <pvl1> jdsbluedevl, wireless or wired
[03:13] <jdsbluedevl> pvi1: wired
[03:13] <zkw> anyone comes frome china ?
[03:13] <achester> Oh =p. Either its not that common of a question or I'm not searching very well then lol.
[03:13] <Aliv3> guys
[03:14] <Aliv3> big problem
[03:14] <tyranos> zkw try #ubuntu-cn if it exists
[03:14] <bastid_raZor> zkw: everyone, probably, in #ubuntu=cn
[03:14] <Aliv3> i lost my vm now i have to redo ubuntu
[03:14] <blackscreen> I'm a little more east than china
[03:14] <hiexpo> lol
[03:14] <pvl1> jdsbluedevl, can you pastebin your /etc/network/interfaces file
[03:14] <jdsbluedevl> pvi1: if I could.  No Internet, no pastebin
[03:15] <no-name> how do you run an app under a different audio type? (e.g. pulse, alsa_
[03:15] <aaroninfidel> Hi, does anyone here use Amazon EC2? I need a little help getting my instance to allow public connections...
[03:15] <zkw> my english is bad
[03:15] <greezmunkey> jds
[03:15] <jdsbluedevl> pvi1: that being said, there are only two lines, and they pertain to lo
[03:15] <defrysk> !cn
[03:15] <CaptainTrek> zkw: !cn
[03:15] <CaptainTrek> er
[03:15] <pvl1> jdsbluedevl, exactly what i was going to ask
[03:15] <defrysk> ;p
[03:15] <CaptainTrek> !cn | zkw
[03:15] <hiexpo> cummicating through martians right now
[03:15] <jdsbluedevl> pvi1: so there are no entries for eth0 or eth1 in /etc/network/interfaces
[03:15] <centr0> is there anyway for compiz to work with fglrx drivers on ubuntu 10?
[03:15] <manchot> is exim the default MTA in ubuntu?
[03:16] <jdsbluedevl> pvi1: which i guess means I have to make the entries?
[03:16] <Aliv3> jdsbluedevl if no internet how are you on freenode?
[03:16] <jdsbluedevl> Aliv3: another computer
[03:16] <Aliv3> oh
[03:16] <blackscreen> does anyone here had problems with video card on lucid?
[03:16] <greezmunkey> jdsbluedevl: what are you connecting your ethernet cable to, cable/dsl modem? Does that device hand out addresses? Do you have a link light?
[03:16] <masshuu> i have a complete backup of a server in a sub directory. is there a way to get the list of packages installed in this backup
[03:17] <pvl1> jdsbluedevl, i message you outside the irc, can we move into there?
[03:17] <jdsbluedevl> greezmunkey: university T1
[03:17] <jdsbluedevl> pvi1: ok
[03:17] <hiexpo> !ask | blackscreen
[03:17] <greezmunkey> jdsbluedevl: So you are connected to a LAN, do you have a link light?
[03:18] <jdsbluedevl> greezmunkey: yes, link light is on, but I just can't connect
[03:19] <greezmunkey> jdsbluedevl: left click the network manager icon in the upper right of your screen, do you see an available connection, maybe called auto eth0?
[03:19] <no-name> how do you run an app under a different audio type? (e.g. pulse, alsa
[03:19] <jdsbluedevl> greezmunkey: the problem is in /etc/network/interfaces, there is only one entry in there, and it pertains to lo.  No eth0 or eth1 in that file
[03:20] <greezmunkey> jdsbluedevl: that only means that network manager is available to manage your connections, it's bby design.
[03:20] <jdsbluedevl> oh
[03:20] <jdsbluedevl> greezmunkey: oh right, the entries would have to be commented out anyways
[03:21] <greezmunkey> jdsbluedevl: so left click the NM icon, is there an availabe connection?
[03:21] <blackscreen> what does it mean if i don't ask  i can't ask?? :)
[03:21] <xyzaffair> using the broadcom STA propriatery in 10.04 but getting poor signal strengths / slow transfers about 1.5mbs at best and im sitting next to an N router, any ideas?
[03:21] <jdsbluedevl> greezmunkey: just eth1, and I tried it.  It times out on me
[03:21] <QpSmiley> If i startx i get (EE) Screen(s) found, but none have a usable configuration.  ... what should I do?
[03:21] <Alejandro89> anybody knows how to install a Canon Pixma iP 1500 Printer in Lucid Lynx?
[03:21] <QpSmiley> im trying to load my gdm but it wont start up I'm in tty1
[03:21] <jdsbluedevl> greezmunkey: dhclient wasn't getting any DHCPOFFERS
[03:21] <pvl1> Alejandro89, google around for it to see if thers a driver
[03:22] <pvl1> QpSmiley, do you already have one running?
[03:22] <QpSmiley> one what? gdm or tty1?
[03:22] <greezmunkey> jdsbluedevl: ok, right click that same icon, select edit connections, what do you see there under wired connections?
[03:22] <Alejandro89> the problem is that they are not any drivers for iP1500.
[03:22] <pvl1> QpSmiley, are you running another xserver at the same time
[03:22] <jdsbluedevl> greezmunkey: Auth eth0 and Auto eth1
[03:22] <pvl1> Alejandro89, sorry, i doubr your gonan have any luck. unless you can port a windows driver somehow
[03:23] <pvl1> xyzaffair, 1.5 within a lan or the internet
[03:23] <Shade37> i need help. Im a bit new to linux and this irc, so how do i get past the "ban" on the #backtrack-linux channel?
[03:23] <greezmunkey> jdsbluedevl: in a terminal window, run ifconfig - what interfaces show up? Is eth0 one of them?
[03:23] <QpSmiley> to be honest I don't know ... before i tried to enable a driver(NVIDIA) and when i restarted my gdm got all messed up .. so it started in tty1 so I'm just trying to get back to where I was prior to enabling the driver
[03:23] <jdsbluedevl> greezmunkey: ifconfig shows both eth0 and eth1
[03:23] <bastid_raZor> Shade37: ask in #freenode
[03:23] <jdsbluedevl> greezmunkey: as well as eth0:avahi and eth1:avahi
[03:24] <greezmunkey> jdsbluedevl: edit auto eth0, what do you see for method?
[03:24] <blackscreen> mo muri da
[03:24] <pvl1> QpSmiley, ah, try restarting
[03:24] <xyzaffair> pvl1, within lan
[03:24] <greezmunkey> jdsbluedevl: belay that...
[03:24] <Shade37> bastid_raZor: thx for the tip
[03:24] <QpSmiley> tried it several times
[03:24] <acerimmer> Shade37: sorry, you'll have to ask the board mods over there - nothing to do with this channel.
[03:24] <jdsbluedevl> greezmunkey: Automatic (DHCP)
[03:24] <Alejandro89> I found a web where somebody explains how to install it but I get in troubles in one step.
[03:24] <xyzaffair> pvl1, was getting about 3.0mb on windows so I know something is wrong and my connection % is bad
[03:24] <greezmunkey> jdsbluedevl: do you also have a wireless interface installed?
[03:25] <jdsbluedevl> greezmunkey: no
[03:25] <pvl1> xyzaffair, you sure u got a good driver on it then
[03:25] <xyzaffair> pvl1, im using the one from hardware manager the broadcom STA
[03:26] <greezmunkey> jdsbluedevl: ok, try this in a terminal window: sudo /etc/init.d/networking restart - see what happens...
[03:26] <pvl1> QpSmiley, you most likely need to reinstall the driver then
[03:26] <jdsbluedevl> greezmunkey: ok, what next?
[03:26] <pvl1> xyzaffair, i gotcha. now is this over http? or howd u check it
[03:26] <QpSmiley> pvl1, I would love to how do I do that in tty1 ... or I will just go back to the default driver
[03:26] <xyzaffair> pvl1, um nfs client/server transfer a big file
[03:27] <greezmunkey> jdsbluedevl:  left click the NM icon, look for available connections
[03:27] <jdsbluedevl> greezmunkey: same eth1, same timeout problem
[03:27] <pvl1> xyzaffair, ok, you sure got ports open and such?
[03:27] <pvl1> QpSmiley, to make it easy, just install envy-ng
[03:27] <xyzaffair> pvl1, that doesn't matter on a lan...
[03:27] <bastid_raZor> !envy-ng
[03:27] <greezmunkey> jdsbluedevl: ok, well then we'll have to dig a bit deeper...
[03:27] <pvl1> xyzaffair, it depends on the dhcp server in the router, if you have a modern router, it doesnt matter
[03:27] <QpSmiley> pvl1 im new so would sudo apt-get install envy-ng work?
[03:27] <bastid_raZor> !envyng
[03:27] <pvl1> QpSmiley, yep
[03:28] <xyzaffair> pvl1, its an N router, anyway my signal % tells the story its way too low
[03:28] <greezmunkey> jdsbluedevl: is the comp you are using now connected to the same network?
[03:28] <xyzaffair> pvl1, been trying this http://ubuntuforums.org/showthread.php?t=1390979 but I cant get past make. someone else posted same issues I have headers installed but it's not seeing them or something weird.
[03:29] <pvl1> xyzaffair, my best guess is the driver is iffy
[03:29] <jdsbluedevl> greezmunkey: no, laptop is connected to university wireless, Ubuntu computer should be connected to wired Ethernet connection
[03:29] <xyzaffair> pvl1, its the one ubuntu ships .....
[03:29] <lws> 看不懂阿
[03:29] <Lividmime> Problem: No sound at all! Total linux-newbie installed ubuntu 10.4 on 5 yr old packard bell easynote. Checked http://ubuntuforums.org/showthread.php?t=205449 Soundcard is detected when trying aplay -l and lspci -v, all channels unmuted on alsamixer (I think, don't quite understand it) tried various other forums for solution; threads are either too technical (i.e. I don't get it) or not applicable. Any suggestions?
[03:29] <zkw> me too  wo ye kanbudong
[03:29] <QpSmiley> pvl1, it said it couldnt find an envy-ng
[03:30] <greezmunkey> jdsbluedevl: ok, just asking - have you used the ethernet connection on other computers, i.e. are you *positive* that it works?
[03:30] <Clouse> Hi there all, I am looking about to see which media player would be best for scheduled video playback, I was having a look at vlc and it looks like it could me a goer what do you think?.
[03:30] <acerimmer> !cn|lws
[03:30] <jdsbluedevl> greezmunkey: it worked prior to wiping the hard drive
[03:30] <uo3273-fvarklb> Hello.  I just acquired the hosts-file from www.mvps.org.  What do I do now to put it into action.  I have to put it somewhere in the /etc directory, right?
[03:31] <greezmunkey> jdsbluedevl: are there two ethernet interfaces installed on the ubuntu box?
[03:31] <pvl1> xyzaffair, doesnt mean its so wonderful
[03:31] <jdsbluedevl> greezmunkey: yes
[03:31] <pvl1> xyzaffair, gimme a sec
[03:31] <Lividmime> Problem: No sound at all! Total linux-newbie installed ubuntu 10.4 on 5 yr old packard bell easynote. Checked http://ubuntuforums.org/showthread.php?t=205449 Soundcard is detected when trying aplay -l and lspci -v, all channels unmuted on alsamixer (I think, don't quite understand it) tried various other forums for solution; threads are either too technical (i.e. I don't get it) or not applicable. Any suggestions?
[03:31] <Clouse> I was also thinking about writing my own interface in python to make it happy fun time for people you use.
[03:31] <no-name> I'm having trouble with an windows app in wine with pulseaudio. how do i run it in alsa with uninstalling pulseaudio?
[03:32] <xyzaffair> pvl1, should I do this n windows app in wine with pulseaudio. how do i run it in alsa with uninstalling pulseaudio?
[03:32] <xyzaffair> * ivo_ has quit (Ping timeout: 265 seconds)
[03:32] <xyzaffair> * administrator (~administr@59.39.151.54) has joined #ubuntu
[03:32] <xyzaffair> * Cpudan80 (~Dan@about/windows/staff/Cpudan80) has joined #ubuntu
[03:32] <xyzaffair> * PureEvil_Cell (~Pureevi@173-111-82-158.pools.spcsdns.net) has left #ubuntu
[03:32] <FloodBot4> xyzaffair: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[03:32] <xyzaffair> * taotetek (~bknox@99-57-136-172.lightspeed.sntcca.sbcglobal.net) has joined #ubuntu
[03:32] <greezmunkey> jdsbluedevl: ok, go back to edit connections, delete both auto interfaces, and restart the box, leaving the ethernet connected.
[03:32] <Lividmime> Problem: No sound at all! Total linux-newbie installed ubuntu 10.4 on 5 yr old packard bell easynote. Checked http://ubuntuforums.org/showthread.php?t=205449 Soundcard is detected when trying aplay -l and lspci -v, all channels unmuted on alsamixer (I think, don't quite understand it) tried various other forums for solution; threads are either too technical (i.e. I don't get it) or not applicable. Any suggestions?
[03:32] <pvl1> QpSmiley, hold on a sec
[03:33] <Clouse> It's probably the wrong channel to ask such things but I couldn't find the vlc channel
[03:33] <bastid_raZor> f/w 10
[03:33] <uo3273-fvarklb> sebsebseb: I've talked to you before.  I just acquired the hosts-file from www.mvps.org.  What do I do now to put it into action for Firefox?  I have to put it somewhere in the /etc directory, right?
[03:33] <today> hi everyone! how enable wiffi at dell inspiron 1464. Thank for help !
[03:34] <sebsebseb> uo3273-fvarklb: I am not sure about your issue, whatever that is
[03:34] <jrtayloriv> I'm getting the following error message while trying to install the kubuntu-desktop package: http://pastebin.ca/1880888
[03:34] <jrtayloriv> What should I do about this?
[03:34] <thune3> Lividmime: does aplay give you output? aplay <whatever wav file>
[03:34] <uo3273-fvarklb> sebsebseb: OK - so you're obviously familiar with the hosts-file ...
[03:34] <today> Can you help me pls? i dont know how enable wifi for dell inspiron 1464( installed) Lucid
[03:34] <jrtayloriv> (Nevermind -- /me should have just f-ing googled it, sorry)
[03:35] <wubba> today try this:
[03:35] <Gryllida> jrtayloriv: sudo apt-get install gnome-settings-daemon
[03:35] <godzirra> Currently Ubuntu is requiring me to have a private key in my ssh setup to login.  How do I disable that?
[03:35] <Gryllida> I think
[03:35] <wubba> http://lmgtfy.com/?q=+enable+wiffi+at+dell+inspiron+1464
[03:35] <Aliv3> LOl
[03:35] <sebsebseb> uo3273-fvarklb: not quite, since stuff tends to just work for me :)
[03:35] <Aliv3> you broke KNOME
[03:35] <today> wubba: how?
[03:35] <Lividmime> thune3: not sure... but probably not, tried front_center.wav, and got no sound
[03:35] <jrtayloriv> Grydilla -- thx, will try
[03:35] <uo3273-fvarklb> Is anyone familiar with the hosts-file.  It's a simple text file you put into the /etc directory in order to block unwanted spammers and other such crap ...
[03:35] <sebsebseb> uo3273-fvarklb: it can be set up to  block access to certain websites and such though
[03:35] <sebsebseb> uo3273-fvarklb: not sure of details though
[03:36] <thune3> Lividmime: what hardware do you have?
[03:36] <uo3273-fvarklb> K - does anyone know where to put the hosts file (text file) in order to make it active?
[03:36] <pvl1> QpSmiley, consult http://albertomilone.com/nvidia_scripts1.html
[03:36] <jdsbluedevl> greezmunkey: now Auto Ethernet shows up, but still getting same timeout problem
[03:36] <Lividmime> thune3: hardware as in what? soundcard? computer? all of it?
[03:37] <wubba> Is there any IRC anyone knows about that talks about comparing switches?
[03:37] <Aliv3> what are the switches?
[03:37] <mac> f
[03:38] <mac> no
[03:38] <mac> r
[03:38] <mac> r
[03:38] <mac> r
[03:38] <mac> r
[03:38] <FloodBot4> mac: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[03:38] <wubba> Aliv3: Network switches
[03:38] <uo3273-fvarklb> Anyone know what the heck I'm talking about?
[03:38] <thune3> Lividmime: it's a soundcard? notebook speakers?
[03:38] <prince_jammys> q
[03:38] <jrtayloriv> I just updated to Ubuntu 10.04, and for some reason, all of the window controls (close, minimize/maximize) all just got moved to the left hand side of the menu bar. Was this supposed to happen? How do I fix this?
[03:38] <Aliv3> yes
[03:38] <mac> 有人吗
[03:38] <Aliv3> it was supoce to
[03:39] <mac> 没有人说中文啊
[03:39] <greezmunkey> jdsbluedevl: run this in a terminal: tail -f /var/log/syslog - after that run: sudo /etc/init.d/networking restart in another, watch the first window to see if you can pick up a reason why dhcp is failing.
[03:39] <Aliv3> ! mac | line
[03:39] <wubba> Aliv3: Looking at the cisco 500 series compared to a netgear business class switch
[03:39] <Aliv3> ! mac | language
[03:39] <bastid_raZor> !controls | jrtayloriv
[03:39] <xangua> !controls | jrtayloriv
[03:39] <mac> 说句中文看看啊
[03:39] <Goatee> hey, is there a shortcut to start the GDM while I'm booting the PC? I can't logout from the running session because I tried the Unity Environment and it changes my desktop resolution and reloads everything so I can't click on anything. kinda screwed up there ^^
[03:39] <xangua> !ja > mac
[03:40] <QpSmiley> pvl1 . it says Envy is no longer supported starting from Ubuntu 10.04. Please use Jockey instead.
[03:40] <ppc_> hello
[03:40] <QpSmiley> is Jockey Ubuntu 9.xx or an Envy substitute
[03:40] <ppc_> who is john
[03:40] <Lividmime> thune3: total newbie, used to win, and therefore other people fixing things for me... but apparently I have a soundcard called something like Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
[03:40] <acerimmer> !cn>mac
[03:41] <QpSmiley> !cn | mac
[03:41] <pvl1> QpSmiley, wow sorry, i didnt even know. i guess try running sudo jockey-text in a terminal
[03:41] <godzirra> Currently Ubuntu is requiring me to have a private key in my ssh setup to login.  How do I disable that so I can login with a username and password?
[03:41] <switchgirl> hi i have a esi-02n splitter and require info on how to safly connect it to the modem as i am using it as a temporary connector so umm left (ingres safe) or right (cpd safe) which is best for the modem?
[03:41] <jdsbluedevl> greezmunkey: nothing is coming out after the restart.  It's just the same from when I ran the tail script
[03:41] <QpSmiley> okay will try
[03:41] <uo3273-fvarklb> jrtayloriv: I wouldn't even bother with 10.04 LTS yet.  I would go back to the 9.10 installation - and let the bugs with 10.04 get worked out.  The Maverick installation is also coming out sooner than later.  Just my opinion ...
[03:42] <pvl1> godzirra, you dont need it. youll still use a usernam andpass. what ssh server did u install
[03:42] <blackscreen> is there ubuntu help in french?
[03:42] <prince_jammys> !fr | blackscreen
[03:42] <Appl6> blackscreen: I think it's #ubuntu-fr
[03:42] <godzirra> pvl1: pvl1 openssh-server
[03:42] <seanix> can't get audio to work in web browsers, even though sound works elsewhere. ideas?
[03:43] <uo3273-fvarklb> sebsebseb: do you know of another channel on which I could get more technical questions answered.  This channel seems to be more of just a mass of Linux users with a random slough of topics ...
[03:43] <pvl1> godzirra, yeah you dont need a private key. basically youll log in with a username and pass, but itll encrypt the data being sent using aprivate key that you can automatically accept with whatever ssh client you use. however there are options to actually require a specific key
[03:43] <godzirra> pvl1: When I try and login, it won't let me unless I use the private key.
[03:43] <Charbel> hi how can i install java ?
[03:44] <sebsebseb> uo3273-fvarklb: yeah sure try ##linux
[03:44] <hiexpo> !java
[03:44] <QpSmiley> pvl1, it said GTKWarning: couldn't open display
[03:45] <QpSmiley> then it said searching for drivers.... ||| then a new terminal line came up(an input line)
[03:45] <pvl1> godzirra, how is it asking, like whats the actually question
[03:45] <godzirra> pvl1: When I try and login I get this:  Permission denied (publickey).
[03:45] <godzirra> pvl1: Unless I specify the key with -i
[03:46] <pvl1> godzirra, did you set it up on your own
[03:46] <godzirra> pvl1: Its part of a cloud setup, so it set it up by itself more or less.
[03:46] <Goatee> does anyone know a shortcut I can use on the boot-up to go to the gdm/user-switcher?
[03:47] <prince_jammys> Goatee: you don't get the login screen upon booting?
[03:47] <pvl1> godzirra, ok can you access the system tho? it seems like you just need to edit ur config file
[03:47] <godzirra> Yes, I can access it fine.
[03:48] <godzirra> I just have to specify the private key file.
[03:48] <godzirra> And I don't wnt to have to do that.
[03:48] <prince_jammys> godzirra: what is the path to the file?
[03:48] <YAY4green> Hey can someone tell me what files they are using to watch today's latest videos on Lucid 10.04? I can't seem to read some DVDs even though I did install the "missing media files" Kubuntu 10.04 asks you after install. Thanks :)
[03:48] <godzirra> prince_jammys: Why does it matter?
[03:48] <prince_jammys> godzirra: guess.
[03:49] <Goatee> prince_jammys: no, I don't have it as a preference. but I need to get to it because I can't logout from the running session (Unity Netbook Edition has problem with my desktop-resolution and reloads everything)
[03:49] <pvl1> godzirra, the file to edit is /etc/ssh/sshd_config
[03:49] <acerimmer> YAY4green: sudo apt-get install kubuntu-restricted-extras
[03:50] <rshakin> hey ppl, i know this is not a ubuntu question, but is there a way to transfer emails out of gmail to a different email supplier ?
[03:50] <godzirra> pvl1: Ah, thanks.  I found it.  Its working now.  Appreciate it!
[03:50] <pvl1> godzirra, np, glad u got it solved
[03:50] <pvl1> rshakin, forward them?
[03:50] <YAY4green> ya I would like to know to about rshakin's question... I'm ditching gmail...
[03:50] <Goatee> prince_jammys: I know I can press alt on a Mac to choose from the startup disk and hoped I can do something similar with the login screen on ubuntu.
[03:51] <YAY4green> acerimmer thanks for answer :)
[03:51] <QpSmiley> pvl1: did you see my last message?
[03:51] <acerimmer> YAY4green: no prob
[03:51] <pvl1> QpSmiley, sorry i dont think so
[03:51] <rshakin> pvl1: no the mails already stored on their servers... i know if i just forward them i can do it any other way
[03:51] <rshakin> pvl1: there are about 2000 messages and forwarding them by hand is out of the question
[03:51] <QpSmiley> pvl1: it said GTKWarning: couldn't open display ||| then it said searching for drivers.... ||| then a new terminal line came up(an input line)
[03:52] <zulu> moin
[03:52] <ebovine> You can turn on POP3 or IMAP on gmail and use any mail backup program or just use any mail client.
[03:52] <pvl1> rshakin, well basically, you could download them all to an email app and try to back em up. i tnik evolution can o that
[03:52] <pvl1> QpSmiley, gimme aminute
[03:52] <ebovine> Evolution, Thunderbird, any of them really.
[03:53] <QpSmiley> pvl1: okay thank you very much :D
[03:53] <ebovine> Doing it that way should preserve any folder structure as well.
[03:53] <rshakin> pvl1: what about exporting them back up to another provider such as yahoo or something like that
[03:53] <Jordan_U> Goatee: You can hold shift during boot and choose recovery mode, but that will bring you to a recovery menu (where you can get to a terminal to fix things). It won't bring you to the GDM.
[03:53] <rgotten> how hard or easy is to use a webserver
[03:53] <ebovine> As far as getting them back up that will depend on where you're going.
[03:53] <juan_> anyone know how to mount an ipod touch to XP in virtualbox?
[03:53] <Jordan_U> rgotten: Depends, what do you want to use it for?
[03:53] <prince_jammys> rgotten: 5.7
[03:54] <pvl1> rshakin, in evolutioni think you might be able to do a copy and paste
[03:54] <Goatee> Jordan_U: hm... that sucks... I really need to change the session :/
[03:54] <rshakin> pvl1: ok thanks... i am going to do some more research
[03:55] <pvl1> rshakin, good luck on it
[03:55] <rgotten> Jordan_0: to place a website i am creating with webx2
[03:55] <pvl1> QpSmiley, run jockey-text --help, you might need to run it with -l or -c instead depending on ur situation
[03:55] <foolguy> how do I move the program bar from the bottom of the screen to the left side
[03:55] <prince_jammys> Goatee: sorry, Jordan_U seems to understand your problem. I don't.
[03:55] <ZykoticK9> what is the filename/path of the default sound file played after login?
[03:56] <rgotten> prince_jammys: 5.7?
[03:56] <QpSmiley> pvl1: thank you will try
[03:56] <isw> !usbboot
[03:56] <rtronk> what is ubuntu 10 codenamed?
[03:56] <isw> !usb
[03:56] <rtronk> like debian 5 is debian lenny, whats ubuntu 10?
[03:56] <ZykoticK9> rtronk, lucid for 10.04
[03:56] <pvl1> QpSmiley, no problem, sorry i couldnt be of more help, but i havent really used jockey
[03:56] <acerimmer> rtronk: lucid lynx
[03:56] <Charbel> !partner
[03:56] <ZachK_> rtronk: 10.04 Lucid Lynx
[03:56] <ZykoticK9> rtronk, maverick for 10.10
[03:57] <trism> ZykoticK9: /usr/share/sounds/ubuntu/stereo/desktop-login.ogg although if you just want to disable the sound it is activated in System/Preferences/Startup Applications/Gnome login sound
[03:57] <Jordan_U> rgotten: What is wbx2?
[03:57] <ZykoticK9> trism, thank you!
[03:57] <zcf115> hello everyone.i am using lucid
[03:57] <ZachK_> zcf115: ok
[03:57] <juan_> anyone know how to mount an ipod touch to XP in virtualbox?
[03:57] <drizzt_> juan_, read help about usb devices
[03:58] <rtronk> is there a easy way i can take a pre-installed ubuntu 10 vps os install and update it to 10.10
[03:58] <bastid_raZor> juan_: probably need to ask in #vbox
[03:58] <zcf115> download a itue
[03:58] <juan_> drizzt_, do u have a link?
[03:58] <foolguy> how do I move the program bar from the bottom of the screen to the left side?
[03:58] <bubuzzz> hi, i pasted the line export GTK2_RC_FILES=/usr/share/themes/00-wasp/gtk-2.0/gtkrc ooffice into the local bashrc file
[03:58] <foolguy> this is really important because part of my screen doesn't work
[03:58] <zcf115> why?
[03:58] <rgotten> Jordan_U webx2 is a software that creates the website for microsoft or linux
[03:58] <Charbel> !multiverse
[03:58] <bubuzzz> but open office only appear with that theme when running on terminal
[03:58] <bastid_raZor> bubuzzz: try holding ALT and left click then drag
[03:58] <Shade37> Ive registered my nick, verified it, and it has been identified. However, im still "banned" from the #backtrack-linux channel. What's up with that?
[03:58] <ZachK_> foolguy: opposite click on the toolbar and choose options
[03:58] <ZykoticK9> trism, i'm planning on changing it for HAL saying "I am completly operational and all my circuts are functioning perfectly" :)
[03:58] <Jon--> Problem: Currently have a full drive with no unallocated space. Installed: Windows, Ubuntu. Boot with: GRUB. Want to: Safely take free-space from existing partitions, make room, install another Debian based OS (BackTrack). How can I do this safely/without modifying my current configuration (ie get space, install using existing boot-loader)
[03:59] <ZachK_> foolguy: from there you can choose were it is located
[03:59] <bastid_raZor> Shade37: banned means they don't want you there for something you've done.
[03:59] <trism> ZykoticK9: hehe, sounds great
[03:59] <bubuzzz> it cannot use the theme when i click on the main menu
[03:59] <bubuzzz> how can i solve it ?
[03:59] <Shade37> I havn't even been on irc before, what have i done to deserve banning before i even knew about it?
[04:00] <YAY4green> Anyone have some suggestions for Decrypting DVDs? I've downloaded Kubuntu 10.04's restricted-extras but am still unable to watch newer DVDs. Thanks :)
[04:00] <prince_jammys> Jon--: you may try repartitioning using something like gparted
[04:00] <ZachK_> Shade37: try changing your nick
[04:00] <xangua> YAY4green: you will need libdvdcss2 aviable in medibuntu
[04:00] <xangua> !Medibuntu > YAY4green
[04:00] <bookface> @seek shepard flawless
[04:00] <foolguy> zachK_: thanks for the help, I couldn't get to that because I had too many windows open, thanks
[04:00] <drizzt_> Watching Dvds in Linux is illegal
[04:01] <prince_jammys> false.
[04:01] <ZachK_> foolguy: did it work?
[04:01] <ebovine> There is a licensed decoder now for Linux.
[04:01] <drizzt_> licensed by whom?
[04:01] <rtronk> how do i install emerge?
[04:01] <bonhoffer> is there a way to ls for only files modified today?
[04:01] <tyrant> drizzt_, doesnt it depend on where you live
[04:01] <ebovine> I'm looking for who released that dvd player.
[04:02] <tyrant> canonical released it i think
[04:02] <hiexpo> !media | ebovine
[04:02] <Jon--> prince_jammys: I can do it safely with GParted? How do I tell installer to use existing GRUB/not orphan my existing OSs?
[04:02] <frankbro> Anyone know how to auto identify with xchat gnome, typing my password directly in the password or nickserv password isnt enought i guess
[04:03] <CaptainTrek> frankbro:  you tried just using xchat and not xchat-gnome?
[04:03] <ZachK_> frankbro: go to the options menu
[04:03] <tyrant> ebovine, i think it is powerdvd for linux
[04:03] <drizzt_> if it was legal, codecs would be included, not hidden in repository outside of USA legislation
[04:03] <Shy> Hi, I have a question. What exactly do I need to install xubuntu on a flash drive? Thought I'd ask here since no one over in #xubuntu responded...
[04:03] <hiexpo> frankbro,  /msg nickserv identify nic password
[04:03] <bastid_raZor> frankbro: /msg nickserv identify yourpassword
[04:03] <Docteh> Jon--: the grub portion of the text installer asks you where you want grub2 installed, i think picking nowhere is an option
[04:03] <xangua> Shy: have you tried with unetbootin¿¿
[04:04] <xangua> !usb > Shy
[04:04] <jrtayloriv> For some reason, I'm not having the "Session" dropdown appear in GDM anymore, so I can't boot into KDE. Is this supposed to be missing in 10.04?
[04:04] <prince_jammys> Jon--: there is always a risk (back up important data), but a gparted live cd is made for this task, yes.
[04:04] <seanix> in my web browsers, the audio doesn't work for streaming videos. how can i fix that?
[04:05] <Jon--> prince_jammys: I would need to use a livecd then? I cannot add a partition using free space from current install?
[04:05] <drizzt_> ok, it's illegal to watch DVD in linux if you live in USA or Japan and haven't paid for decoder. /discussion
[04:05] <juan_> anyone know how to mount an ipod touch to XP in virtualbox?
[04:05] <ZykoticK9> trism, thanks - works perfectly
[04:05] <Jon--> Docteh: It actually has a GUI installer similar to Ubuntu. Will it automatically notice the existing Grub, if not, and I don't install it, how do I have grub rescan for installed OSs? I am new to all of this.
[04:05] <hiexpo> !windows | juan_
[04:05] <prince_jammys> Jon--: you'll have to shrink an existing partition to make a new one for backtrack. you can perhaps do it on an unmounted partition without live cd.
[04:05] <prince_jammys> !gparted | Jon--
[04:05] <xangua> juan_: are you using the vbox incluided in the repository¿¿
[04:06] <merma> anybody knows how to remove that pixel border around windows?
[04:06] <bricky> hey
[04:06] <prince_jammys> Jon--: since there is always a risk, make sure to back up things you'd hate to lose.
[04:06] <hiexpo> bricky, ////
[04:06] <bricky> hiexpo :D
[04:07] <drizzt_> Jon--, you will need to launch update-grub on target system
[04:07] <elizandro> hi
[04:07] <elizandro> hello
[04:07] <elizandro> I'm brazilian
[04:07] <hiexpo> !hi | elizandro
[04:07] <prince_jammys> Jon--: actually, i think gparted comes with the Ubuntu live CD, if you have that. (used to be "Partitioner" in the menus)
[04:07] <hiexpo> !br | elizandro
[04:08] <drizzt_> hiexpo, would you stop it please?
[04:08] <elizandro> thanks ubottu
[04:08] <Docteh> Jon--: i wasn't aware that gparted deals with grub
[04:08] <QpSmiley> pvl1: still here?
[04:08] <hiexpo> drizzt_,  - stop what helping people ok
[04:08] <clayg> what is the easiest to use ipod program for ubuntu
[04:09] <pvl1> QpSmiley, yeah btu i might need to go soon
[04:09] <drizzt_> citing them useless factoids instead of helping
[04:09] <pvl1> QpSmiley, are you on the forums?
[04:09] <bubuzzz> it looks like the menu doesnt take the session from export command
[04:09] <Costanza> can anyone explain one thing.. when i want to remove gst-plugins-good it also wants to remove emphaty.. rhytmbox etc..  can i stop it from doing that.. i mean i just want to remove gst good so i can reinstall it.. why it removes other apps?
[04:09] <QpSmiley> pvl1: I can be
[04:09] <bubuzzz> is there anybody knowing this ?
[04:09] <QpSmiley> pvl1: should I post a topic?
[04:09] <hiexpo> drizzt_,  - if there useless why are they there ?
[04:09] <jimisrvrox> hey guys whats the command to put at boot options to choose the graphics mode? because when I boot up normally it comes up and says pc display correct/video mode not supported
[04:09] <keith> lubuntu on a 366mhz with 160 meg of ram it works fine  thank ubuntu guys
[04:09] <pvl1> QpSmiley, my forum sn is pavel989, message me
[04:09] <bastid_raZor> Costanza: instead of remove use reinstall
[04:09] <kathe> Costanza, I believe it's because empathy and rhytm box needs gst
[04:10] <xangua> Costanza: then use synaptic and mark it to reinstall
[04:10] <keith> old laptop new again
[04:10] <bricky> anybody good with VMware?
[04:10] <keith> crazzy
[04:10] <kathe> bricky, moderately decent, what are you looking to do, and which VMWare
[04:10] <bricky> http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1013225
[04:10] <keith> got to go to bed now later everyone
[04:11] <bricky> is there any other way to do this keith?
[04:11] <bricky> err kathe
[04:11] <keith> i guess not :)
[04:11] <keith>  good nite all
[04:11] <bricky> kathe? lol
[04:11] <kathe> bricky, that's talking about an error, I guess what you are asking is either can you install XP or can you get around the error
[04:12] <QpSmiley> pvl1: sent you a message
[04:12] <kathe> bricky, or are you asking how to adjust a windows install file
[04:12] <bricky> kathe: can I can install it on a physical partition with linux
[04:12] <bricky> Can I
[04:13] <foolguy> ok, I am in the ubuntu software center. I understand how to use programs from the terminal, but how do I add them to the applications?
[04:13] <kathe> bricky, yes you can follow the instructions, but the instructions asume you know something you probably don't.
[04:13] <mib_mib> i think i'm having permission issues including gems while deploying rails; gem directory is /usr/lib/ruby1.9.1/gems/1.9.1, how do i give it the proper permissions?
[04:13] <Gulopine> anybody know where i can ask questions about installing/configuring gis tools?
[04:13] <bricky> kathe: I would gladly  follow them, if I could find them
[04:13] <bastid_raZor> foolguy: right click applications.. edit menus .. but normally installing something that uses the gui it adds it automatically
[04:13] <bricky> kathe: what is that>?
[04:14] <kathe> bricky, it's called slip streaming, it gives you a generic set of instructions, but basically it's you create your own XP install disk that has some modifications
[04:14] <seanix> is there a chatroom for totem?
[04:15] <bricky> kathe: I cant use any CDS my computer overheats lol
[04:15] <bricky> I need to do it right on linux, preferably with VMware
[04:15] <kathe> bricky, what is your computer
[04:15] <bricky> im just wondering if that is possible
[04:15] <bricky> so it does not blue screen
[04:15] <kathe> bricky, yes it is
[04:15] <bricky> kathe HP DV 8000
[04:15] <prince_jammys> seanix: try #gnome
[04:15] <kathe> bricky, lets pm then
[04:16] <bricky> kathe: alright
[04:16] <bricky> Thakns
[04:16] <hiexpo> bricky,  blow it out with a compressor  most overheating probs are caused by dirty comps
[04:16] <tonechef> Does anyone run 10.04 on a Macbook 5,1 without overheating?
[04:16] <seanix> prince_jammys, thanks
[04:16] <prince_jammys> welcome
[04:16] <kathe> hiexpo, actually that's a firmware issue
[04:16] <kathe> hiexpo all HP DVs had it
[04:16] <uo3273-fvarklb> Can anyone help me understand the results I am getting with KlamAV?  I don't know if what it's telling me are really viruses ...
[04:16] <bricky> hiexpo: thanks ive been doing everything
[04:16] <bricky> this is by far the only chance I have :)
[04:17] <ZachK_> uo3273-fvarklb: It's unlikely that you have any viruses on your machine unless you are visiting some far out sites
[04:17] <hiexpo> kathe,  hp dv's?
[04:17] <ZachK_> welcome maruen
[04:17] <kathe> hiexpo their dv line like the dv5z I have and the dv 8000, early firmware had a fan speed issue
[04:17] <maruen> ZachK_, hey
[04:18] <maruen> ZachK_, tell me
[04:18] <ZachK_> maruen: tell you what
[04:18] <hiexpo> kathe, oh ok thanks did not know that / good to know
[04:19] <maruen> ZachK_, you wouldn't tell me something?
[04:19] <ZachK_> maruen: what do you wish to know?
[04:19] <bhavamitra> hello, at ubuntu 10.04 server install, i've created two lvm volumes encrypted and one not encrypted. the not encrypted one i could successfully set it to mount at /boot, but the encrypted ones i couldn't as it just flashed the screen and kept on the same menu portion. anything wrong?
[04:19] <uo3273-fvarklb> ZachK:  OK.  Yeah - I just reinstalled 9.10.  All I've done so far on Mozilla is get the hosts-file from mvps.org - and do the Google search required to get there.  KlamAV is telling me I have these viruses ... name of file = /usr/lib/lib*.so, name of the problem is "Encryption.Zip".  Are library files typically encrypted?  Is this something to be worried about?
[04:19] <ZachK_> maruen: If assistance thou need please, ask. If thee needest not assistance then join #ubuntu-offtopic
[04:19] <dr3mro> please i have no hibernate option in lucid , there is suspend restartand shutdon but now hibernate
[04:20] <ZachK_> !security | uo3273-fvarklb
[04:20] <dr3mro> please i have no hibernate option in lucid , there is suspend restart and shutdown but now hibernate
[04:20] <dr3mro> please i have no hibernate option in lucid , there is suspend restart and shutdown but no hibernate
[04:21] <iTrollU> dont repeat urself
[04:21] <iTrollU> we can read
[04:21] <BSaboia> just some of us
[04:21] <hiexpo> rough help crew tonight i got reprimanded for helping with useless factoids  \\\ I'm taking my toys and going home
[04:21] <CaptainTrek> i dont have a hibernate option in the drop down eitiher
[04:21] <CaptainTrek> but i get through it dr3mro
[04:21] <dr3mro> CaptainTrek, what ??
[04:22] <ZachK_> dr3mro: What system specs dost thou have?
[04:22] <StrangeCharm> my computer locks itself regularly. how do i make it not do that?
[04:22] <iTrollU> uninstall ubuntu
[04:22] <ZachK_> iTrollU: please do not attempt to not help
[04:23] <shadows090> strangecharm, there are settings under screensaver i believe
[04:23] <shadows090> to lock it or not**
[04:23] <shadows090> system>preferences>screensaver
[04:23] <StrangeCharm> shadows090, thanks, an understandable, if somewhat counterintuitive place to put them
[04:24] <hiexpo> I'll go help in pentoo and backtrack i guess
[04:24] <shadows090> strangecharm, lol agreed
[04:24] <Docteh> odd
[04:24] <prince_jammys> hiexpo: stop moping, you're fine. :)
[04:24] <dr3mro> ZachK_, ubuntu was working perfectly but I discovered that now ... it worked 2 weeks a go
[04:24] <Docteh> on my eeepc when i close the lid in the console the screen stays on,whats up with that
[04:25] <bastid_raZor> StrangeCharm: there is also System > Preferences > Keyboard .. look at the Typing break tab
[04:25] <shadows090> docteh, system> preferences > powermanagement
[04:25] <CppIsWeird> i just tried to install ubuntu-server on a computer using a usb flash drive. i downloaded the normal ubuntu-server iso and put it on the pen drive with unetboot. the installation stops because it cant find the ubuntu cd in the cdrom.
[04:25] <ZachK_> dr3mro: ok and?
[04:25] <shadows090> docteh there is a setting to change what happens when you close the lid. some of the ubuntus have been a bit iffy with the laptops and hybernate/standby though
[04:26] <StrangeCharm> bastid_raZor, sure, but i want less of that, not more
[04:26] <bastid_raZor> StrangeCharm: you can turn it off its enabled.
[04:26] <bastid_raZor> if
[04:26] <Guest31063> hi
[04:26] <hiexpo> Docteh,  in power management i believe on most
[04:27] <edbian> Guest31063, Hello.  Question about Ubuntu?
[04:27] <Docteh> shadows090: is there a console app to mess with power management? i just have minimal gui apps
[04:27] <QpSmiley> okay I'm back I made a topic on the forums if anyone has time maybe they could check it out :D thank you
[04:27] <shadows090> cppisweird, i probably can't help (since i've never had that problem), but you say it stops in the middle of installation?
[04:27] <CppIsWeird> shadows090, yes
[04:27] <QpSmiley> oh the topic is http://ubuntuforums.org/showthread.php?p=9443706#post9443706 by the way
[04:28] <shadows090> docteh, which desktop system are you using. xubuntu?
[04:28] <Docteh> just icewm
[04:29] <lieb> Hey guys I just compiled  xchat_auth.c , I had no error messages, but I can still see ~ before my nick in the whois on irc, which is problematic on the undernet server, anyone have experience with ident in ubuntu? I'm using 10.04
[04:29] <shadows090> cppisweird, under http://learn.clemsonlinux.org/wiki/Ubuntu:Install_from_USB_drive#Booting_up_and_Installing it says that it should ask where the iso is located
[04:29] <CppIsWeird> i see.
[04:29] <shadows090> which is weird, because i don't recall it asking me that (i've used unetbootin for a few isos before). does it ask any any point in time though?
[04:30] <CppIsWeird> i did have another cd in the cdrom, perhaps if i remove it. brb i will try again
[04:30] <ZykoticK9> CppIsWeird, i could certainly be wrong!  but i didn't think server or alternate cd worked from USB, i've certainly heard of the cd error before.  best of luck man.  i hope i'm wrong :)
[04:30] <shadows090> cppisweird; alright. and maybe zykotick9 is right :-/
[04:31] <istvan> hey, i just read tar's --help but i can't figure out how to extract a .tar into a different directory. help?
[04:32] <mechdave> istvan: all I do is navigate to the directory I want the un tar'd file in and then type tar -xvf /path/to/tar/file
[04:33] <CppIsWeird> heh, thats sort of odd. it would seem to me that the server version would have more use with alternative installation methods.
[04:33] <ZykoticK9> CppIsWeird, it does - but i'm not sure about USB
[04:33] <shauno> istvan: it's oddly worded, but -C /destination/dir/ does it
[04:33] <istvan> ah, ok
[04:34] <istvan> thanks both of you!
[04:34] <shadows090> cppisweird, you'd think so. i guess 10.04 is still more of a bare bones OS
[04:35] <CppIsWeird> ZykoticK9, ive found tutorials on netbooting bit not from windows. does the dhcp server itself have to be pxe enabled?
[04:35] <SeanInSeattle> WebSiteAdministrationQuestion:  Hey all.  Can someone help me understand what the term media means/applies-to?  I heard that from a web developer friend of mine... and I didn't understand its use.
[04:35] <ZykoticK9> CppIsWeird, sorry man i've never tried using any of the net booting stuff.  good luck!
[04:35] <CppIsWeird> ZykoticK9, thanks anyways. :)
[04:36] <shadows090> SeanInSeattle, media just means music or videos usually, if that's the question
[04:36] <mopi> CppIsWeird: No you do not
[04:37] <lieb> I just compiled  xchat_auth.c , but I can still see ~ before my nick in the whois on irc, which is problematic on the undernet server, anyone have experience with enabling ident in ubuntu or at least this fake one? I'm using 10.04
[04:37] <mopi> CppIsWeird, what exactly are you trying to do? I just jumped in, I've done lots of stuff with PXE
[04:37] <SeanInSeattle> shadows098:  I got the impression that it was a group of file types which included css....
[04:37] <CppIsWeird> ubuntu-server on cd-romless box.
[04:37] <CppIsWeird> we just established that usb will not work so now were trying to attack netboot.
[04:37] <hiexpo> lieb,  /msg nickserv identify nic password
[04:38] <chalcedny> hiexpo, undernet has X
[04:38] <mopi> CppIsWeird, the easiest way to do that is to just boot from a flash drive. PXE is a long process.
[04:38] <hiexpo> oh
[04:38] <Cittadino> anyone knows how could I record all incoming/outcoming tcp traffic in a .log?
[04:38] <KB1JWQ> Cittadino: Define traffic.
[04:38] <neverwin> did somebody know how to install Xen on Ubuntu 10.4?
[04:38] <Appl6> Cittadino: Look up wireshark.
[04:38] <mopi> Cittadino, Wireshark?
[04:38] <shadows090> cittadino, you can do it with squid proxy; but i'm not really familiar with it to give instructions
[04:39] <KB1JWQ> Cittadino: tcpdump.
[04:39] <shadows090> cittadino: yeah wireshark would be MUCH easier lol
[04:39] <hiexpo> wireshark
[04:39] <lieb>  <hiexpo> i'm already loading my connect text file and it works, It registers my nick on undernet so I know that works
[04:39] <Cittadino> incoming/outcoming connections.. i think i can skip packets themselves.. not looking a sniffer just to log connections
[04:39] <lieb> [23:25] * [lieb] is logged in as lieb
[04:39] <emmanuel> This is kind of random but does anyone know how to use advanced gmail search?
[04:39] <neverwin> I have make Xen from source code, how I got Dom0 Kernel
[04:40] <chalcedny> * [lieb] (~jimbuntu@modemcabl
[04:40] <chalcedny> still not identd
[04:40] <lieb> yup
[04:40] <CppIsWeird> mobi, i have, it stops during the installation looking for the cd in the cdrom
[04:40] <mopi> CppIsWeird, check this out/ http://www.pendrivelinux.com/boot-multiple-iso-from-usb-multiboot-usb/
[04:40] <lieb> I know
[04:40] <rww> Axilus: try asking a more specific question, in #ubuntu-offtopic
[04:40] <hiexpo> lieb, so your using > /msg nickserv identify { your nic } {your password like that } ?
[04:40] <Cittadino> should i go for wireshark even just for connection logging?
[04:40] <lieb> I tried xinetd, oidentd before, and now im up to loading a fake one
[04:40] <lieb> yup
[04:41] <chalcedny> my computer froze now it let me reboot it.. are there things i ought to do?
[04:41] <Cittadino> ok ill check it out ty
[04:41] <lieb> it connects me but still prompts to /quote pass01234 something like that every once in a while
[04:41] <shadows090> cittadino: that would probably be easiest. it's possible to set up a real internal proxy server via squid (connects between the host and switch/router) that does full logs, but that's quite a hassle
[04:41] <hiexpo> i'm lost than
[04:41] <chalcedny> lieb, the quote pass thing can be bypassed with a script also
[04:42] <lieb> Ive compiled xchat_auth correctly into my /home/auth/
[04:42] <lieb> ive suidroot it too
[04:42] <lieb> xchat.org/auth/
[04:42] <Cittadino> shadows090 but i'd just get web connections in that case, correct me if im wrong
[04:42] <chalcedny> lieb, windows or linux, there is a script for it, ask in #xchat
[04:42] <k-rad> i notice in the user management aspect of gnome that you have the ability to change the location of a users home directory.  i am the only user on the comp, and wish to change the location of my /home directory, and next installation, change my username to match that directory.  is that all doable ?
[04:42] <lieb> linux
[04:43] <lieb> ill just look for a script then, but im pretty sure I looked
[04:43] <chalcedny> lieb, i have it if you dont get it
[04:43] <bricky> where can I download VMware for linux
[04:44] <hiexpo> bricky vmware
[04:44] <bricky> it has to be near impossible.. ;P
[04:44] <lieb> I'm asking here cause i'm using ubuntu lucid lynx, and if anyone had a suggestion to make ident work, tell me!, I've even forwarded port 113 in my router (tomato linux)
[04:44] <shadows090> cittadino: squid can log just about anything (even how much resources the hosts are using). it's quite advanced for what you're trying to do; and i'm not too familiar with it to answer specific questions. there's probably a way to just log ip connections though
[04:44] <hiexpo> bricky, one sec i have it
[04:44] <bricky> hiexpo: thats just step one and its taking me hours
[04:44] <lieb> it does support ident anyways, and I had DD-WRT before and that did as well
[04:44] <bricky> thank you hiexpo
[04:45] <k-rad> lieb, oidentd has worked for me in the past sudo apt-cache search oidentd
[04:45] <benkevan> how can I take a screenshot at my login manager? scrot just gives me error
[04:45] <benkevan> will import work?
[04:46] <k-rad> forward 113 on your static ip address, then just adjust its configuration i assume
[04:46] <k-rad> lieb, then restart servicer
[04:46] <k-rad> service
[04:47] <ZykoticK9> benkevan, does it have to be "your" login manager?  it's easy to take screenshots of VM's login windows, not sure how you could do it on a native system though!  good luck.
[04:47] <lieb> It's already forwarded, so is 10 dcc ports for downloads/uploads which works like a charm
[04:48] <k-rad> lieb, then get googling :)
[04:48] <trevor> anyone know if "Good Os" distro is any good compared to XUbuntu?
[04:49] <benkevan> ZykoticK9: yeah.. that was my thought also.. guess I'll just load up slim in a vm, and take a screenshot..
[04:49] <lieb> yup, im trying oidentd again
[04:49] <ubuntus> hi I want to upgrade to the new version of ubuntu by my hd only has 3.7 gigs left. when you upgrade are the pacakages from the old release "deselected" or are they actually purged?
[04:49] <shadows090> benkevan, if it doesn't have to be yours you could probably just find a picture lol. i'm not sure what the use is though
[04:50] <benkevan> ? it's to take a picture of a dm theme I made
[04:50] <benkevan> thanks..
[04:50] <shadows090> benkevan, ooh ok. wish i could help
[04:50] <shadows090> maybe a vnc would work instead?
[04:51] <shadows090> whichever is easier i guess
[04:51] <prince_jammys> trevor: ask at ##linux, though you're unlikely to get a straight answer to a question like this.
[04:51] <trevor> I spose so :)
[04:51] <benkevan> actually
[04:51] <kindofabuzz> How would I add a folder to the right click "Move to"?
[04:51] <benkevan> i should be able to use xnest?
[04:51] <acerimmer_> ubuntus: dump obsolete packages first, sudo apt-get autoremove
[04:51] <genewitch> Should i install the FGLRX drivers on 10.04 for an ATI 5850, or should i download the ones from ATI?
[04:51] <QpSmiley1> yay!!! my gdm is fixed!
[04:51] <kindofabuzz> well gdm!
[04:51] <ubuntus> acerimeer_, before or after the upgrade?
[04:52] <prince_jammys> QpSmiley1: used nv driver?
[04:52] <shadows090> benkevan, yeah that should work actually
[04:52] <QpSmiley1> yes prince!
[04:52] <benkevan> QpSmiley1: did you uninstall it
[04:52] <benkevan> ?
[04:52] <markcl> whats the best way to share my net connection with a xp netbook via cable? im using ubuntu 10.4.
[04:52] <QpSmiley1> no ben, my driver wouldn't allow gdm to load then i switched the driver
[04:52] <prince_jammys> QpSmiley1: you'll probably be tempted to try propietary ones like you were doing. Now you know what to do when Xorg breaks.
[04:53] <shadows090> markcl, you could do a bridge if you have a crossover cable
[04:53] <ZykoticK9> benkevan, "  -n, --xnest  Ignored - retained for compatibility" that's from gdmflexiserver (what used to run xnest)
[04:53] <kathe> markcl, what type of connection do you want
[04:53] <QpSmiley1> yea I'm planning on trying some others now =P
[04:53] <hiexpo> bricky,  - sudo apt-get install build-essential linux-headers-$(uname -r)
[04:53] <hiexpo> bricky,  - pm
[04:54] <prince_jammys> QpSmiley1: see the bot's guide about nvidia
[04:54] <flan_suse> I'm not quite sure I understand. Is Sun Java JRE available in 64-bit for Ubuntu from the repositories?
[04:54] <flan_suse> And this applies to Hardy, Jaunty, Karmic, and Lucid?
[04:54] <QpSmiley1> okay thank you prince_jammys
[04:54] <Traveler> why is my text cut in half in this chat?
[04:54] <hiexpo> bricky,  - go here and find it instructions included   \\\ http://ubuntuguide.org/wiki/Ubuntu:Karmic
[04:55] <hiexpo> bricky,  u are useing 9.10 ?
[04:56] <mopi> bot
[04:56] <kathe> hiexpo, he is using 10.4
[04:56] <genewitch> should i install GRUB on wubi insall?
[04:56] <ZykoticK9> benkevan, ok so i installed xnest - then tried running it with "Xnest :1" but it just shows me a black screen :(  Hope you find an actual solution.
[04:56] <markcl> shadows090, kathe: i want to share my connection from ubuntu to xp. i have the cable already installed. my only problem is how to set it up in ubuntu.
[04:56] <hiexpo> kathe,  - oh ok he'sgot problems than   :)
[04:56] <acerimmer_> genewitch: NO NO A THOUSAND TIMES NO!
[04:57] <genewitch> acerimmer_: yeah i thought it was odd that it even asked.
[04:57] <mopi> markcl, just give each computer a static ip address in the same subnet with the same mask, etc
[04:57] <biggestchops> acerimmer_ what is that line from
[04:57] <kathe> markcl, what type of connection, do you just want to copy files, play games, basically proticols
[04:57] <acerimmer_> genewitch: at least research grub/wubi before you attempt it
[04:57] <soge> my sound is mute and i cant unmute it. I'm using ubuntu v10.04 lts, who do i unmute it
[04:57] <biggestchops> yes yes a thousand times yes
[04:57] <acerimmer_> biggestchops: that's from my life, man.  everyday
[04:57] <biggestchops> is it jane austen?
[04:57] <genewitch> acerimmer_: it was a system update thing, it asked if i wanted to continue without installing grub
[04:58] <biggestchops> it is funny that someone named acerimmer_ would be quoting jane austen unwittingly
[04:58] <acerimmer_> genewitch: sorry gotta go in no
[04:58] <biggestchops> if indeed acerimmer_ means what i think it does
[04:58] <markcl> mopi: is there an easy way to set it up so that my ubuntu box automatically gives xp an adress via dhcp or is the static ip option the best setup?
[04:58] <bastid_raZor> !ics | markcl
[04:58] <shadows090> markcl, the older ubuntus (6 versions) could use bridge-utils to set it up (should be in repository), but it did require some manual connections
[04:59] <shadows090> manual settings**
[04:59] <mopi> markcl: static is your best option for crossover
[04:59] <evon> anyone know any screenlets that play music other than MPD
[04:59] <kathe> markcl, you can use bridge-utils, or if you have a router
[04:59] <mopi> markcl: its the quickest way
[04:59] <thompa> is there a simple way to join irc ? i cant figure out empathy
[04:59] <markcl> thanks mopi.
[04:59] <soge> my sound is mute and i cant unmute it. I'm using ubuntu v10.04 lts, how do i unmute it, n e one?
[04:59] <genewitch> So should i install the restricted FGLRX driver that ubuntu is talking about for my ati 5850 or should i install the proprietary one from ATI's website?
[05:00] <flan_suse> Is there a 100% working native Java 64-bit for Ubuntu now? Or does it still have issues that the 32-bit version does not?
[05:00] <kathe> soge, that's a tricky one, because there can be a lot of things, have you checked the forums yet for your model computer
[05:00] <edbian> genewitch, It's the same driver
[05:00] <thompa> how are you supposed to join irc support ubuntu?
[05:00] <edbian> genewitch, use the package manager
[05:00] <thompa> took me forever
[05:00] <genewitch> edbian: good to know
[05:00] <mknarr> thompa, use Xchat
[05:00] <genewitch> edbian: package manager? not the hardware drivers screen?
[05:00] <mknarr> xChat 2**
[05:00] <thompa> ok
[05:01] <edbian> genewitch, same thing again :)
[05:01] <soge> kathe: it was working before ( last startup ) , now it just says "mute all". I
[05:01] <glorious__> thompa: I did better w/ Konversation.  Its pretty simple.  I haven't figured out empathy yet either
[05:01] <genewitch> empathy reminds me of apple chat
[05:01] <thompa> mknarr: seems more difficult now
[05:01] <mopi> does anybody know if or when samba 4 will be released?
[05:01] <mknarr> thompa, i just set it up like 3 secs ago
[05:02] <kathe> soge, you install anything or run an update recently
[05:02] <thompa> i keep clicking wrong thing. rooms or these flickr and other accounts
[05:02] <glorious__> thompa:  hate to say, but i couldn't figure out xchat either.  Konversation
[05:02] <thompa> made to mess you up it seems
[05:02] <soge> yes, i installed quite a few things...
[05:02] <thompa> yea ive used konversation
[05:02] <mknarr> ok, i find xchat pretty ez but i onlu ever log on to 1 irc channel this one lol
[05:03] <glorious__> thompa: what are you on right now?
[05:03] <thompa> i make my self available in empathy and nothing happens
[05:03] <DeliriumTremens> any idea why my synergy wont stay connected?
[05:03] <thompa> empathy. i dont know how i got it working
[05:03] <hiexpo> glorious__,  pidgin
[05:03] <QpSmiley1> okay, I have an nVidia GeForce 6150SE nForce 430 .. should I use nv or nouveau
[05:03] <thompa> or is it pigin i dont know
[05:03] <glorious__> thompa: that's too bad, or I'd ask you how you did it
[05:04] <thompa> lol
[05:04] <DeliriumTremens> vnc keeps bringing up black screens, synergy stops working
[05:04] <mopi> is there channel specifically for ubuntu server
[05:04] <DeliriumTremens> and some things i dont want to do in terminal
[05:04] <DeliriumTremens> options?
[05:04] <kathe> soge, I wouldn't know where to begin then, I highly suggest searching the forums for your model computer and no sound
[05:04] <prince_jammys> !server > mopi
[05:04] <thompa> glorious__: support page is wrong too. it says use something elese
[05:04] <glorious__> hiexpo: well hate to say, but i haven't figured out pidgin yet either
[05:04] <mknarr> !server > mknarr
[05:05] <hiexpo> glorious__, pidgin is easy and does it all
[05:05] <mopi> prince_jammys: thanks
[05:05] <soge> kathe: my computer is no specific model... ( its custom ), so do i instead search for the motherboard then ?
[05:05] <glorious__> thompa: I usually want to use the default first so i can teach others, but so far i can't figure out empathy
[05:05] <prince_jammys> mopi: err, #ubuntu-server
[05:06] <thompa> glorious__: yea
[05:06] <kathe> soge, do you know the model of soundcard and if on board sound, then model
[05:06] <thompa> broadcast accounts confusing term
[05:06] <hiexpo> glorious__,  - what do u need it to do?
[05:06] <thompa> flikr and all sorts of junk on there
[05:06] <mknarr> !join #ubuntu-server
[05:07] <glorious__> hiexpo: okay, at some point i'll try pidgin again on your rec.
[05:07] <prince_jammys> mknarr: slash instead of exclamation point
[05:07] <soge> kathe: no i'll have to look that up, also do you know why this happened?
[05:07] <mknarr> prince_jammys,  thx
[05:07] <kathe> soge, usually it's some jacked up configuration in pulse or alsa that does this, it's been a problem since they put pulse audio in ubuntu
[05:07] <hunk_> Hey guys, I'm using Ubuntu 10.0.4 and had to reinstall my ati drivers from the package manager and I reenabled 3D acceleration and now it's not picking up all my monitor resolutions any ideas :/
[05:07] <glorious__> hiexpo: to begin w/, just connect
[05:07] <kathe> soge, you will find lots of people with the problem, I've had it on every machine, and the fix has been different every time
[05:07] <kathe> soge, the worst case scenerio is getting rid of pulse
[05:08] <kathe> soge, there is an artical called getting rid of the beast called pulse or similiar
[05:08] <soge> kathe: pulse... alright i'll have to research this then , damn.
[05:08] <markcl> is there a point to setting up a firewall in ubuntu? arent the programs trusted anyway?
[05:08] <thompa> glorious__: im going back to konversation. empathy is a nightmare
[05:08] <copantl> hi
[05:09] <mopi> ubottu
[05:09] <mopi> !
[05:09] <prince_jammys> mopi: /msg ubottu SomeKeyword
[05:09] <copantl> any body know how to fix the network-manager issue?
[05:09] <hunk_> Anyone?
[05:09] <mknarr> hunk_,  try reinstalling your divers or manually configure your  video config file(dont ask me how to configure the file :S)
[05:09] <user> g
[05:09] <hiexpo> glorious__,  - sudo apt-get install pidgin 1st > next open it and new find your server msn/ yahoo ladie dedah /etc input your email password > aghhh lagh wah    > magic
[05:09] <mopi> !server > mopi
[05:10] <hunk_> Oh ok I'll give that a shot. Thanks!
[05:10] <prince_jammys> mopi: for example: /msg ubottu server   to start a chat with ubottu.
[05:10] <kathe> copanti, i often remove the nm applet and readd it
[05:10] <glorious__> hiexpo: i just started it and it seems like i must have gotten further than i remembered
[05:10] <tom_> How do you restart x-windows?
[05:10] <taiyal> am I the only one who's had an installation of WINE break Firefox's font rendering?
[05:10] <wasutton3-Laptop> does anyone know of a working YCbCr to RGB converter?
[05:11] <miopio> hoho
[05:11] <mopi> is there a list of commands for ubottu
[05:11] <prince_jammys> tom_: sudo /etc/init.d/?dm restart  , if you use a graphical login.
[05:11] <kathe> taiyal, i've heard of that recently, so i dont think so, your not alone...  don't know the fix :(
[05:11] <tom_> prince_jammys: x-windows keeps crashing and I can't get to a terminal.
[05:11] <ZykoticK9> tom_, alt+sysrq+k is the panic keys, "sudo service gdm restart" is the command to restart GDM
[05:11] <taiyal> kathe: I'd just look it up on Google but I need to install Dillo first >_<
[05:11] <miopio> fdfsdfgsg
[05:11] <miopio> nhp]p
[05:12] <prince_jammys> tom_: that sucks. see if the sysrq way works.
[05:12] <copantl> kathe: i has to installed wicd, but the problem is that wicd do not work with vpn's , any idea?
[05:12] <tom_> ZykoticK9: I don't have a "sysrq" key.
[05:12] <ZykoticK9> tom_, check printscreen
[05:12] <glorious__> mopi: i think if you go into private chat w/ ubottu you can ask and get its commands
[05:12] <prince_jammys> tom_: try the prntscrn key
[05:12] <prince_jammys> or prtsc
[05:13] <prince_jammys> seems to have worked, at least partially ;)
[05:13] <mknarr> lol
[05:13] <prince_jammys> hehe
[05:14] <glorious__> hiexpo: at least I got a channel going
[05:15] <prince_jammys> mopi: /msg ubottu ubottu
[05:15] <copantl> any body know howto fix the nm-applet?
[05:15] <Izinucs> copantl: in what way?
[05:15] <kathe> copantl, so the applet is not letting you vpn?
[05:15] <taiyal> is there any way to remove packages with no installation candidate from apt's package lists?
[05:15] <copantl> kathe: nope the nm-applet do not work at all
[05:16] <lieb> It works
[05:16] <prince_jammys> sudo invoke-rc.d network-manager restart
[05:16] <lieb> My oidentd is working !!!
[05:16] <copantl> i have to use wicd for connect to wireless
[05:16] <Izinucs> copantl: for wired or wireless
[05:16] <kathe> copantl, 10.04
[05:16] <lieb> or rather I mean my ident daemon...
[05:16] <copantl> 10.04 amd64
[05:16] <copantl> over a dell xps 1330
[05:17] <Izinucs> copantl: ah.. there's benefits to wicd and NM.. I use wicd on the desktop because I can set a static ip and nm on laptop for vpn
[05:17] <copantl> i got alll my vpns with nm .... you can tell how difficult is for me this issue
[05:18] <glorious__> For a friend I'm looking for a coldfusion ide for Ubuntu.  Any recommendations?
[05:19] <Izinucs> How fast in mb's is 100KB/s ??
[05:19] <kathe> .1
[05:19] <copantl> when i tried to edit a network on nm the window get hang
[05:20] <Izinucs> copantl: and wicd doesn't do vpn
[05:20] <copantl> Izinucs: exactly
[05:20] <r0zz> hi, im working with j2me using netbeans ide on karmic but lock and die when i run my aplication
[05:20] <r0zz> what can i do?
[05:21] <Izinucs> copantl: is your wireless network secured? wep or wpa?
[05:21] <copantl> wpa
[05:21] <copantl> i can use terminal for vpn...but this is not a option for me
[05:22] <Izinucs> copantl: if you want to try NM again then do so with wpa disabled.. no security.. if it connects then you know you have to work on the encryption side..
[05:22] <copantl> its suppose to work right
[05:22] <copantl> ok Izinucs
[05:22] <Izinucs> copantl: not sure if it's accurate but I think NM will only do wpa2
[05:22] <r0zz> hi, im working with j2me using netbeans ide on karmic but lock and die when i run my aplication, what do i have to do?
[05:23] <pvl1> how come 777 is not a valid octal umask
[05:23] <copantl> Izinucs: wep, wap and wap2 works ok in 9.10
[05:23] <copantl> like a charm
[05:24] <glorious__> r0zz: I wonder if #ubuntu-java would have some help???
[05:24] <Izinucs> copantl: did you "upgrade" to 10.04 or fresh install?
[05:24] <copantl> Izinucs: fresh install
[05:25] <r0zz> thanks, but i think they are too busy? anymore?
[05:25] <prince_jammys> pvl1: says who?
[05:25] <Izinucs> copantl: strange.. I haven't tried encryption on my laptop yet so I haven't struggled with your issue.. but still that's strange.
[05:25] <glorious__> r0zz: I went to that channel and it looks like there are a few people over there.  Might be worth a try.
[05:25] <pvl1> prince_jammys, pysdm. im trying to mount a drive with 777 permission, but it tells me that it isnt valid
[05:26] <kathe> copantl, what is your nic?
[05:26] <prince_jammys> pvl1: you probably want 000
[05:26] <copantl> you know the extrange part.... after about 30 ninutes the applet appear in my panel
[05:26] <prince_jammys> pvl1: umask is the inverse of the mode you'd use in say, chmod.
[05:26] <pvl1> prince_jammys, uh, alright ty. inverse?
[05:26] <r0zz> glorious__: thanks  im going to try again
[05:27] <copantl> but every time when i tried to edit a network or add a vpn get hang!
[05:27] <genewitch> Two things: how do i make the HDMI audio work on my radeon, and how do i tell ubuntu/ati that i want the Right monitor to be "main display" so my desktop is on it?
[05:27] <Izinucs> copantl: typically NM and wicd don't coexist well.. you typically have to uninstall one or the other
[05:27] <prince_jammys> pvl1: the opposite. 777 denies everything to everyone
[05:27] <genewitch> they're "multi display" but the bars and stuff are on monitor 1, i want them on monitor 2
[05:27] <pvl1> prince, oh lol, now i feel like an idiot. but why dont chmod and this coincide?
[05:27] <prince_jammys> pvl1: $ umask 777; >foo; ls -l foo;  ... ---------- 1 mischa mischa 0 Jun 11 00:25 foo
[05:27] <prince_jammys> pvl1: yeah, you don't want that :)
[05:28] <copantl> ok...  the problem is if i unisntall wicd ..i cant get connect
[05:28] <pvl1> prince_jammys, so is it that chmod is the opposite of it? im confused on y they dont work the same
[05:28] <kathe> copantl, have you tried removing the notification box and readding it
[05:28] <kathe> to the panel
[05:28] <prince_jammys> pvl1: i don't know why
[05:28] <kremlon> does anyone know of a proxy scanner that works on linux?
[05:29] <copantl> kathe: remove it from the panel?
[05:29] <pvl1> prince_jammys, oh well, thank you for the help though
[05:29] <Izinucs> copantl: you could download the .deb from packages.ubuntu.com and have it available "just in case" .. when you uninstall it will not uninstall the dependancies I believe
[05:29] <prince_jammys> pvl1: welcome. wikipedia perhaps talks about umask's history.
[05:30] <kathe> copantl, you said, the nm manager shows up after 30 minutes right
[05:30] <copantl> Izinucs: good idea
[05:30] <copantl> kathe: yes
[05:30] <copantl> kathe: i did that i remoit from the panel but nothing
[05:30] <pvl1> prince_jammys, i was already on it, but i guess i need to read into it. one more quick bit, how do i find the gid of a group?
[05:30] <prince_jammys> pvl1: probably because umask cannot enable any _new_ permissions that weren't already enabled.
[05:31] <copantl> kathe: what version do you have?
[05:31] <kathe> copantl, the nm manager usually is part of the notification grouping, along with power and sound...  if you remove the notification area, and readd it see if it shows up right away
[05:31] <kathe> copantl, I run 9.10 and 10.04 on my boxes
[05:31] <STF> hi i am looking for a simple dhcp-server for my wlanstick to set up a small "hotspot"
[05:31] <bricky> how would I repair my botched vb installation
[05:31] <pvl1> prince_jammys, ooh so it can only kinda work to the max permissions allowed
[05:31] <prince_jammys> pvl1: getent group | grep GroupName  # the first 'group' is literal
[05:31] <copantl> kathe: not this problem in any one?
[05:32] <kathe> copantl, after an update on 9.04, and when i first installed 10.04, I had problems with the nm showing up, often it would be missing or show up as another icon
[05:32] <pvl1> prince_jammys, thanks again
[05:32] <prince_jammys> pvl1: welcome
[05:32] <kathe> copantl, when I removed the notification area, and readded it, the nm would show up suddenly
[05:32] <genewitch> STF: there's ICS help
[05:32] <kathe> copantl, that's why i ask
[05:32] <genewitch> !ics|STF
[05:33] <Izinucs> transferring a file using scp from one machine to another on my lan is S L O W ...
[05:33] <copantl> kathe: ok, how do you remove it and readded?... from the panel
[05:34] <Blue1> STF: this is what I did:  http://pkill-9.com/wordpress/?p=218
[05:34] <copantl> kathe: because i did it using properties from panel and nothing
[05:34] <crabgrass> hey guys, interesting wget thing i wanna do
[05:35] <kathe> copantl,  there is a little spot if you right click on the panel it selects the notification section and choose remove from panel
[05:35] <pvl1> prince_jammys, well i changed all the values to the correct values, and its mounting with the permissions i want, except in read-only mode, and fstab doesnt seem to say anything about read onyl for this drive
[05:35] <kathe> copantl, then right click on the panel, choose add to panel, and select the notification area out of the list
[05:35] <prince_jammys> pvl1: what is the umask you used?
[05:35] <copantl> kathe: you complete right whe i delete it... the nm appear in my panel
[05:35] <pvl1> prince_jammys, 000
[05:35] <crabgrass> i'm trying to save a mirror of a website, but the images therein are stored on another server. how can i use wget (or maybe curl) to grab all those images?
[05:36] <prince_jammys> pvl1: mm, i don't know. ask the channel, pasting the fstab line
[05:36] <oren> i got GeForce 6200. i installed glx-180 and glx-185. when running nvidia-setting i am told i don't use nvidia X driver and advice me to install nvidia-xconfig but I can't find this package. advice?
[05:36] <pvl1> prince_jammys, actually i think i found it, hold on a sec
[05:36] <copantl> kathe: i don't what happen but when i delete the icon from panel the nm appear and is working
[05:37] <crabgrass> wget's been running for about 5 minutes now, and it's pulled down close to 400 robots files, and only about 6 images. this is not what i want it to do
[05:37] <copantl> but all my notification of power and sound desappear
[05:37] <kathe> coplantl, it's a current bug
[05:37] <pvl1> prince_jammys, yeah its doing ro, which is read only
[05:37] <Zeu5> hi guys, i have another issue with regards to ubuntu. its about mplayer. i am using 10.0.4 and i cannot run my rmvb files. i keep gettin a directshowsource could not open as vidoe or audio. i have tried this page already. http://ubuntuguide.net/install-mplayer-and-multimedia-codecs-in-ubuntu-10-04lucid
[05:37] <prince_jammys> pvl1: it's nice when things make sense
[05:37] <kathe> coplantl, you need to readd the notification again
[05:37] <STF> !ics
[05:38] <klaxian> when i start ubuntu, i get an error that the nvidia driver could not be loaded and x is in low graphics mode.  restarting X fixed the problem and i verified that nvidia is loaded with lsmod. is this a race condition?  how can i solve it?
[05:38] <pvl1> prince_jammys, i think its a bug in pysdm, it keeps rewriting it to ro
[05:38] <crabgrass> anyone?
[05:38] <prince_jammys> pvl1: i have no idea what pysdm is :)
[05:38] <pvl1> !pysdm
[05:38] <pvl1> wow really?
[05:38] <Zeu5> hi guys, i have another issue with regards to ubuntu. its about mplayer. i am using 10.0.4 and i cannot run my rmvb files. i keep gettin a directshowsource could not open as vidoe or audio. i have tried this page already. http://ubuntuguide.net/install-mplayer-and-multimedia-codecs-in-ubuntu-10-04lucid
[05:38] <prince_jammys> a desktop manager?
[05:38] <STF> blue1: i would like to do it like you, but i've have the problem that i have the server '(it is an old Laptop) behind a router
[05:39] <pvl1> prince_jammys, nay, its a gui for fstab written in python
[05:39] <prince_jammys> pvl1: ah.
[05:39] <pvl1> prince_jammys, for us lazy people. but sometimes u just gotta do it by hand to get it right
[05:40] <rtronk> hello, i created a selections list, dpkg --get-selections > Installs
[05:40] <prince_jammys> !clone
[05:40] <rtronk> i replaced it with an existing sourcelist i created from another server.
[05:40] <copantl> kathe: yes  i can tell that... get hang again
[05:40] <ZykoticK9> Zeu5, be sure you have restricted extras installed and then try "mplayer -vo x11 $filename"
[05:40] <genewitch> :JKAHSDL:ASH
[05:40] <prince_jammys> rtronk: see if the factoid i hit prematurely helps.
[05:41] <kathe> coplantl, that's what i thought, my wife actually found a proceedure on some forum that fixes this
[05:41] <kathe> coplantl, unfortunately, i don't know where and she's not here
[05:41] <copantl> kathe: uggh what shame
[05:41] <kathe> coplantl, but it has to do with resetting the defaults
[05:41] <kathe> coplantl, to gnome
[05:42] <kathe> coplantl, I suggest searching the forums for the perm solution
[05:42] <ZykoticK9> Zeu5, sorry re-read your error, looks more like a codec issue then video output
[05:42] <kathe> coplantl, until then, that's a work around
[05:42] <Zeu5> ZykoticK9: i am now installing restricted extras.
[05:42] <copantl> kathe: i thought that i have to compile from tar
[05:42] <ZykoticK9> Zeu5, restricted should work
[05:42] <Zeu5> ZykoticK9: erm. okie. i hope so too.
[05:42] <kathe> coplantl, no, it was something small, my wife just copied and pasted some commands in the terminal
[05:43] <crabgrass> well, #wget is dead.
[05:43] <copantl> kathe: those the guys of canonical knows about this issues?
[05:43] <crabgrass> anyone in here know wget fairly well? i'm trying to rip all the photos off a website, and my current method isn't working too well
[05:43] <Zeu5> ZykoticK9: it didnt work. same problem
[05:43] <prince_jammys> crabgrass: have you looked at the mirroring examples at the bottom of wget's man page?
[05:43] <copantl> kathe: because this thing can take me to another distro
[05:44] <kathe> copantl, yep, she said there was a bug entry on it already, it has to do with the notification/gnome/nm conflict, working on a patch
[05:44] <Zeu5> hi guys, i have another issue with regards to ubuntu. its about mplayer. i am using 10.0.4 and i cannot run my rmvb files. i keep gettin a directshowsource could not open as vidoe or audio. i have tried this page already. http://ubuntuguide.net/install-mplayer-and-multimedia-codecs-in-ubuntu-10-04lucid
[05:44] <genewitch> two questions again: How do i set which display is my primary (the one the desktop is on). and secondly, my blu ray drive completely DIES when ubuntu starts. won't eject, won't retract the tray, and i have to actually shut the computer off to get it to reboot (it hangs on SATA5 - the blu ray).
[05:44] <genewitch> The error is ATA 3 softreset failed
[05:45] <jack_> Why does my computer shut down every time I try to burn a video DVD?
[05:45] <crabgrass> prince_jammys: yeah, and it did help some, but since the images themselves are hosted on another site, i have to run with -H to get them at all, and that's resulting in about 800 robots.txt files for each image. very innefficient.
[05:45] <copantl> kathe: ok thanks for all ... i will googling for the answer
[05:45] <ZykoticK9> Zeu5, i'm downloading a rmvb but it will be a few minutes
[05:45] <kathe> copantl, I stay away from the LTS releases of ubuntu, they usually place the most resent push everything to the max they are willing to, so they can support it for that extended release time, but it takes them 6 months to patch up...  9.10 is what I run on most, and it's solid
[05:45] <genewitch> Xinerama isn't working properly either. should i file a bug?
[05:45] <kathe> copantl, np
[05:46] <copantl> kathe: you are complete right about versions.... i'm very coriuos thats kill me :)
[05:46] <prince_jammys> genewitch: now that you ask, you'll never rest until you do
[05:47] <genewitch> prince_jammys: could be. but it's not letting me use the entirety of my largest monitor.
[05:47] <prince_jammys> i'd search for that bug first
[05:47] <Zeu5> ZykoticK9: thanks, i have to be away for 20 odd minutes. thank you if you can leave a message here for later.
[05:48] <steven89> How do I view what process a hidden PID is from command line?
[05:48] <KB1JWQ> steven89: Define "hidden?"
[05:48] <prince_jammys> a hidden PID?
[05:48] <steven89> yeah
[05:48] <prince_jammys> explain.
[05:48] <steven89> I ran unhide or whatever and it says it found a HIDDEN PID: 3301
[05:48] <KB1JWQ> steven89: 'ps aux' as root should show anything running; if it's not there something's amiss.
[05:49] <ZykoticK9> Zeu5_, the 1st rmvb worked with mplayer
[05:49] <jack_> Why does the computer shut down when I try to burn a DVD-Video?
[05:49] <steven89> Thanks.  I will try that
[05:49] <KB1JWQ> unhide?
[05:49] <corinth> Hey room. Anyone know how to switch the Radiance window controls to the right side of the decoration?
[05:49] <Zeu5> ZykoticK9: mine cannot. i am not sure what i need to do to get it to work?
[05:49] <rww> !controls | corinth
[05:49] <prince_jammys> jack_: see if your logs reveal anything. this used to happen to me (overheat)
[05:49] <ZykoticK9> Zeu5, both of the files i download work
[05:50] <ZykoticK9> rww, !controls is my favorite bot message - it links to my site ;)
[05:50] <rww> ZykoticK9: hehe :)
[05:50] <jack_> I am a complete noob.  How do I check logs?
[05:50] <corinth> Thanks a ton, rww.
[05:51] <Zeu5> ZykoticK9: so that means i downloaded a bogus file?
[05:51] <prince_jammys> jack_: less /var/log/dmesg.0 , for example
[05:52] <ZykoticK9> Zeu5, ? the mplayer output in a terminal does give an error "ERROR: Could not open required DirectShow codec drv43260.dll" but it's working!
[05:52] <taiyal> I fixed the firefox/wine problem by removing the msttcorefonts folder and rebuilding the font cache
[05:53] <prince_jammys> jack_: gnome may come with a graphical log viewer, see the menus.
[05:53] <prince_jammys> you'd be interested in dmesg's log
[05:54] <steven89> I ran 'ps aux' as root and it did now show the process for the PID.  I later tried again and it only detected one as before but a different hidden PID.  These hidden PIDs are not showing up with Sudo ps aux.  What does this mean? The hidden PID number keeps changing.
[05:54] <mek8630> Does anybody in here use Skype?
[05:54] <ZykoticK9> taiyal, if you are running firefox under wine - it's a really good idea.  it can open many sites impossible under any 'linux' native browsers, it's also actually faster then native firefox.
[05:54] <gtoy> my screen goes black at startup what can I do?
[05:54] <jack_> prince_jammys: I found the log file viewer. What do I look for that says my computer overheated?
[05:54] <theadmin> Any way to make notifications be the old way? Like not somewhere in the middle but in top-right?
[05:54] <prince_jammys> jack_: look for 'CPU' to begin with
[05:55] <prince_jammys> jack_: specifically, look for the log entries at the time you shut down
[05:55] <ZykoticK9> theadmin, good luck!
[05:55] <theadmin> ZykoticK9: ?
[05:55] <theadmin> ZykoticK9: One of Canonical's weirdnesses which I still haven't managed to fix lol
[05:55] <ZykoticK9> theadmin, moving the notification window is very non-trivial.
[05:55] <genewitch> how do i tell ubuntu what display is my primary display? (IE change 2 to 1 and vice versa)
[05:56] <ZykoticK9> theadmin, i've seen hacks to do it, but have never done it myself
[05:56] <kathe> taiyal, yeah
[05:56] <anthony> hi to all of you thanks to the idea of community i finally get Ubuntu 10.04 working on my computer. thank you so much...
[05:57] <greenjon> anthony: glad to hear that :)
[05:57] <mek8630> anthony: I had a problem trying to install 10.04 what kind of problem was you  having?
[05:57] <jack_> prince_jammys: None of the log files have "cpu" in them.
[05:57] <mek8630> anthony: but I was never able to fix the problem that is why I am asking
[05:58] <theadmin> ZykoticK9: I really want it back where it is supposed to be :/
[05:58] <anthony> mek8630: first i boot the live cd and press f6 tho disable the acpi=off and apic...
[05:59] <theadmin> Canonical is hacking gnome like heck knows what
[06:00] <ZykoticK9> theadmin, those "hacking gnome" is what makes Ubuntu what it is!
[06:00] <mek8630> anthony: why did you have to disable those?
[06:00] <theadmin> ZykoticK9: Oh?... Hm... I'd rather have it without this hack anyway
[06:00] <Mirshe> hi
[06:00] <genewitch> probably in a virtual machine
[06:00] <Mirshe> i'm confused
[06:00] <mek8630> anthony: for some reason it quit in the middle of the installation on mine. After that it only wanted to run in command-line type
[06:00] <Mirshe> anyone know where to download the 64-bit version of flash?
[06:00] <ZykoticK9> theadmin, that's why i leave it the way it is ;)
[06:00] <mek8630> Does anyone in here use skype or anything like it?
[06:00] <theadmin> But at least Ubuntu works... Tried Fedora right now, kernel panic right after boot lol
[06:01] <Mirshe> it seems to have gone missing
[06:01] <kathe> mek8630 i do
[06:01] <wildbat> << speaking in skype now
[06:01] <goodmami> Hi, i upgraded to Lucid and I noticed temporary unresponsiveness when logging in (either at login screen or immediately after). It appears to be unresponsive while it connects to wireless networks. Any ideas?
[06:01] <mek8630> kathe: do you use a handset phone ?
[06:01] <kathe> mek8630 no
[06:01] <kathe> goodmami, you called it right, the lag is on wireless networks
[06:02] <mek8630> kathe: ok thanks anyways I use a handset phone that plugs into the usb and i can't figure out how to install the driver for it so I can use it instead of a microphone
[06:02] <rtronk> !clone
[06:02] <goodmami> kathe: is this a known problem? I couldn't find a bug on launchpad
[06:02] <kathe> goodmami, that and other physical drives
[06:02] <prince_jammys> rtronk: glad you liked it
[06:02] <anthony> mek8630: i don't know why i need to disable them maybe because i need to boot the cd then i install Ubuntu 10.04. then it works
[06:02] <Mirshe> I've just noticed that I did not have Flash installed.  I run Lucid 64-bit, but the 64-bit version of Flash seems to have gone missing.  Anyone know where to download it from?
[06:02] <root___> hi
[06:02] <kathe> doomami, here are the steps I've seen, go into bios, and make sure no unneeded hardware is enabled, such as a floppy drive that doesn't exist
[06:03] <Aliv3> umm
[06:03] <mek8630> anthony: thank you I will try what you did and maybe I will get lucky
[06:03] <genewitch> how do i tell ubuntu what display is my primary display? (IE change 2 to 1 and vice versa)
[06:03] <Aliv3> where is the power button on ubuntu 10.04?
[06:03] <rtronk> is it possible to UN install all dpkg package's that arnt on a clone Installed <- file
[06:03] <kathe> goodmami, then after checking bios, remove extra wireless devices
[06:03] <theadmin> Mirshe: sudo apt-get --reinstall install flashplugin-installer
[06:03] <anthony>  mek8630: ok your welcome..
[06:03] <theadmin> Aliv3: What?
[06:03] <Appl6> Aliv3: Top right corner.
[06:03] <Mirshe> theadmin: thanks
[06:03] <kathe> goodmami, is known bug under general hardware
[06:03] <Aliv3> ok thanks
[06:03] <Aliv3> sorry for stupid question.
[06:03] <Ivunche> chile?
[06:03] <prince_jammys> !es > Ivunche
[06:03] <goodmami> kathe: great, thanks for the help
[06:04] <ZykoticK9> Mirshe, if you want the 64bit version of flash from a PPA check out these directions, good luck http://www.sucka.net/2010/04/proper-install-of-flash-for-x64-ubuntu/
[06:04] <jack_> prince_jammys: I found a log entry in syslog: "Critical temperature reached (102 C), shutting down."
[06:04] <Mirshe> theadmin: are you sure that's an i686 version?
[06:04] <prince_jammys> jack_: there you go, overheating.
[06:04] <Mirshe> all the files are appended as i386
[06:04] <ZykoticK9> Mirshe, theadmin's recommendation is 32bit flash with the click issue
[06:04] <prince_jammys> jack_: perhaps your fan[s] is bad.
[06:04] <Mirshe> ahhh
[06:04] <theadmin> ZykoticK9: Err, "click issue"
[06:04] <theadmin> ?
[06:04] <mek8630> Does anyone else in here use Skype and a handset usb phone to make/receive calls?
[06:05] <ZykoticK9> theadmin, flash on 64bit with the 32 wrapped flash version has an issue sometimes where clicking doesn't work - there is a fix
[06:05] <mek8630> Or how do you manually install drivers for usb devices?
[06:05] <anthony> i have a problem i you will make Ubuntu 10.04 show all the ICON in the NOTIFICATION area because i don't see any icon.. pls help me
[06:05] <kathe> goodmami, np, seen a lot of that one lately, only thing is if bios is crap, somepeople get stuck
[06:05] <ZykoticK9> Mirshe, see my message above
[06:06] <jack_> prince_jammys: That might be the problem, but when I set my computer down, I set it on a towel (don't ask why).
[06:06] <goodmami> kathe: yeah, it's been bothering me for a while, but i could not find a bug report to subscribe to
[06:06] <prince_jammys> now i have to ask why
[06:06] <Mirshe> thanks, ZykoticK9, working on that right now
[06:06] <goodmami> kathe: i'll try your advice and hope it is fixed
[06:07] <mek8630> Does anyone in here know how to manually install device drivers?
[06:07] <theadmin> anthony: Is the Notification Area applet there? Reset your panels.
[06:07] <theadmin> ubottu: resetpanels | anthony
[06:07] <Ivunche> some chilean?
[06:07] <jack_> prince_jammys: I set the computer on my desk chair which is very uncomfortable.  This is why I put towels on it.
[06:08] <prince_jammys> jack_: i really don't know what effect that might have :)
[06:08] <prince_jammys> Ivunche: why? you want support in Spanish?
[06:08] <jack_> prince_jammys: I'm sorry.  I didn't know if that might absorb heat or something.
[06:09] <prince_jammys> jack_: time to experiment :)
[06:09] <kathe> alright it's late for me
[06:09] <kathe> you all have a good night
[06:09] <greenjon> prince_jammys: what kind of computer are you talking about setting on towels?
[06:09] <greenjon> kathe: night :)
[06:09] <Ivunche> not only wanted to speak Spanish
[06:09] <prince_jammys> greenjon: 'tis not I.
[06:10] <DolleBertus> nederland/englisH?
[06:10] <prince_jammys> english
[06:10] <jack_> greenjon: that's I
[06:10] <opticon> i need some help!
[06:10] <anthony> theadmin: still the same i don't see any icon on the notification area.
[06:10] <greenjon> prince_jammys: oh sorry. hard to keep up with some of my chats i have open lol
[06:10] <DolleBertus> NL/ENG
[06:10] <prince_jammys> !nl > DolleBertus
[06:10] <ortsvorsteher> !nl
[06:10] <greenjon> jack_: what computer might that be?
[06:10] <DolleBertus> well im qeuit fucked up right now!
[06:10] <jack_> greenjon: my laptop
[06:11] <opticon> im fuked up too bro...lol
[06:11] <DolleBertus> im from NL!
[06:11] <DolleBertus> it's here now
[06:11] <DolleBertus> 7AM
[06:11] <greenjon> language please
[06:11] <prince_jammys> fantastic. try #ubuntu-offtopic , or #ubuntu-intoxicated
[06:11] <theadmin> DolleBertus: Well, what is the problem!?
[06:11] <coz_> DolleBertus,  I think you meant  "I am quite goobered right now"   this is a family channel :)
[06:11] <DolleBertus> yeah im family
[06:11] <DolleBertus> wait i'll go private
[06:11] <theadmin> ...what the heck.
[06:12] <greenjon> jack_: i see. what issue are you having?
[06:12] <prince_jammys> overheating
[06:12] <jack_> greenjon: what he said
[06:12] <greenjon> jack_: putting it on towels definitely won't help :P
[06:13] <prince_jammys> maybe in an oven?
[06:13] <greenjon> jack_: need to have it raised a bit. maybe try getting a stand for it
[06:13] <prince_jammys> jack_: try leaving ample space for air to circulate
[06:13] <greenjon> prince_jammys: exactly
[06:13] <jack_> prince_jammys: not a bad idea
[06:14] <prince_jammys> well, you got acquainted with the world of logs
[06:14] <prince_jammys> sadly
[06:14] <greenjon> jack_: i've had that issue with 3 laptops i've owned and 2 netbooks. all of them i've either used a stand with (one i can put in my lap) or some fan made for them to put in my lap if not using both stand and fan together :D
[06:15] <anthony> i have a problem i can't shutdown my Ubuntu 10.04 but i can restart it can any one help me i don't know what to do. pls help me....
[06:16] <jack_> i am going to try burning the dvd again, but this time i'm turning my fan on high and putting it on an open table
[06:16] <theadmin> anthony: Do any of these commands work? "sudo shutdown -h now", "sudo poweroff", "sudo init 0"
[06:16] <jack_> if i get a chance i'll meet up later
[06:16] <explodingzebras> hi
[06:17] <explodingzebras> yes sudo shutdown -h works
[06:17] <prince_jammys> i doubt you'll get to try the second one
[06:17] <explodingzebras> as long as u follow it up with a time like 'now'
[06:17] <theadmin> explodingzebras: That question wasn't directed to you
[06:17] <anthony> it does not shutdown my computer but it just make my computer log for a long time and does not shutdown
[06:17] <Molathor> i'm trying to edit a dll file using ghex, now that i've found the proper offset, it won't let me edit the hexadecimal - anyone know why?
[06:17] <greenjon> jack_: okay. try looking at walmart or somewhere for stands/fans sometime. well worth it and can save you having to buy a laptop ;)
[06:18] <greenjon> anyways, bbiab
[06:18] <Molathor> even tried running ghex as admin just in case
[06:18] <crabgrass> can mv recurse?
[06:19] <Gnea> crabgrass: yes.
[06:19] <santhu> hi
[06:19] <Molathor> anyone familiar with ghex?
[06:19] <Gnea> crabgrass: by default, it does
[06:19] <crabgrass> ah.
[06:19] <prince_jammys> crabgrass: when you mv a directory, you move it and all its contents.
[06:19] <explodingzebras> i wish someone would wake up the deluge chat ppl....
[06:20] <Gnea> "I'm terribly sorry to awaken you, but we have explodingzebras..."
[06:20] <theadmin> Gnea: lol
[06:20] <crabgrass> so `mv *.jpg test` would move all jpgs in any dir into test?
[06:20] <prince_jammys> crabgrass: no
[06:21] <explodingzebras> lol theres 60 ppl in #deluge
[06:21] <crabgrass> mr _r
[06:21] <theadmin> crabgrass: No. It would move all jpegs from current dir into test
[06:21] <jack_> greenjon: i might have a stand in the basement somewhere, but I definitely won't buy another laptop just because this can't burn dvds
[06:21] <crabgrass> derp
[06:21] <crabgrass> mv -R
[06:21] <prince_jammys> crabgrass: no
[06:21] <crabgrass> oh.
[06:21] <Gnea> crabgrass: no, only the jpgs in the current directory. by default, it will only recurse when mv'ing *everything
[06:21] <crabgrass> oh bummer.
[06:21] <Gnea> crabgrass: but...
[06:21] <theadmin> crabgrass: find . -iname '*.jpg' -exec mv '{}' /path/to/directory/ \;
[06:21] <prince_jammys> crabgrass: your question isn't so much about mv, but about globs (*.jpg), and *.jpg isn't recursive
[06:21] <Gnea> ^^ that
[06:21] <jrtayloriv> I just updated to 10.04, and then installed the kubuntu-desktop package, but when GDM loads up, there is no "Sessions" dropdown for me to select KDE from. Do I have to enable this somewhere in 10.03?
[06:22] <jrtayloriv> s/10.03/10.04/
[06:22] <theadmin> crabgrass: This moves all jpegs from current dir to /path/to/directory/
[06:22] <crabgrass> theadmin: thanks prince_jammys: yeah, there's still a bunch i need to learn
[06:22] <MikeChelen> anyone know a good keyboard-to-piano program?
[06:22] <theadmin> crabgrass: (including subfolders)
[06:22] <Gnea> MikeChelen: a what program?
[06:23] <theadmin> Gnea: You know, those musical keyboard thingies
[06:23] <crabgrass> good lord, that was fast
[06:23] <MikeChelen> Gnea, piano midi player that uses computer keyboard
[06:23] <crabgrass> theadmin: that's a damned elegant solution dude, thank you very much
[06:23] <crabgrass> gonna save that one
[06:24] <Gnea> MikeChelen: hrm, do you mean to control a music-keyboard that's connected to the computer via midi cable with the computer-keyboard?
[06:24] <theadmin> crabgrass: GNU find is powerful
[06:24] <crabgrass> theadmin: yeah it is
[06:25] <bushy_halp> hey
[06:25] <greezmunkey> theadmin: off the top, do you know if 'locate' takes those arguements as well?
[06:25] <jack_> Have a good night!
[06:25] <theadmin> greezmunkey: It doesn't
[06:25] <bushy_halp> who knows about dual booting
[06:25] <bushy_halp> i need help
[06:25] <Gnea> MikeChelen: I just want to make sure so that we're not coming up with incorrect solutions :)
[06:25] <theadmin> bushy_halp: What exactly with?
[06:25] <bushy_halp> ive been working on it all day
[06:25] <gtoy> I can boot only if use nomodeset in the grub otherwise black screen..  now it in 800x600 with noise on the botom..
[06:25] <crabgrass> theadmin: the man page isn't too clean on -iname, can i do -iname '*.jpg,*.jpeg'?
[06:25] <Gnea> !dualboot | bushy_halp
[06:26] <bushy_halp> no
[06:26] <Gnea> crabgrass: -name could work too
[06:26] <MikeChelen> Gnea, meaning the user can play a virtual music keyboard using only the computer keyboard
[06:26] <prince_jammys> greezmunkey: locate works with a (possibly outdated) database; you wouldn't want to be -exec'ing stuff with it.
[06:26] <bushy_halp> i need to use virtual box,
[06:26] <crabgrass> Gnea: but that's case-sensative... right?
[06:26] <bushy_halp> and write to a partition
[06:26] <Gnea> MikeChelen: alright...
[06:26] <bushy_halp> so i need to take my 60 gb partition
[06:26] <greezmunkey> prince_jammys: no doubt :)
[06:26] <Gnea> crabgrass: indeed. but this can be worked around:  -name "*.[Jj][Pp][Gg]"
[06:26] <prince_jammys> crabgrass: -iname '*.jpg' -o -iname '*.jpeg'
[06:26] <theadmin> crabgrass: Unsure. Maybe you could use something like this insaneness: for f in '*.jpg' '*.jpeg' ; do find -iname $f blah blah ; done
[06:26] <bushy_halp> and make it a vdi file
[06:27] <bushy_halp> so it can install it on that
[06:27] <gichity> Hello all. When trying to install ubuntu from alternate DVD on hard disk i get a "Debootstrap error.. Failed to determine the codename for release". This happens after i have successfully partitioned and intending to install.. What is the problem?
[06:27] <bushy_halp> so i can then redo the config fine with my live cd.
[06:27] <greezmunkey> heh LAMP server on Ubuntu ~= 15 min...M$ ~= 2.5 hours...
[06:27] <bushy_halp> someone that can help pm me
[06:27] <bushy_halp> im really frusterated
[06:27] <crabgrass> Gnea: theadmin: prince_jammys: now you guys are busting out all kinds of stuff, gimmie a sec to mull it over
[06:27] <Gnea> crabgrass: by all means, take your time
[06:28] <bushy_halp> anyone
[06:28] <crabgrass> prince_jammys: -o is -or ? alright.
[06:28] <prince_jammys> crabgrass: yep
[06:28] <prince_jammys> you need 'jpg OR jpeg'
[06:28] <crabgrass> right
[06:28] <MikeChelen> Gnea, what would that be called?
[06:29] <prince_jammys> crabgrass: GNU find supports fancy regex for that, but no need.
[06:29] <bushy_halp> can someone help
[06:29] <prince_jammys> just use -o
[06:29] <crabgrass> wait, from the manpage: "expr1 -o expr2 Or; expr2 is not evaluated if expr1 is true." that doesn't sound good.
[06:29] <bushy_halp> me install windows from ubuntu
[06:29] <bushy_halp> while ubuntu is loaded
[06:29] <crabgrass> prince_jammys: dude i'm deathly afraid of regexs
[06:29] <prince_jammys> crabgrass: it means 'the test passed, no need to check the other test'
[06:30] <jrtayloriv> I just updated to 10.04, and then installed the kubuntu-desktop package, but when GDM loads up, there is no "Sessions" dropdown for me to select KDE from. Do I have to enable this somewhere in 10.04?
[06:30] <crabgrass> prince_jammys: oh so its not like a || in c++, where the second one won't be evaluated?
[06:30] <theadmin> jrtayloriv: Select a user first, then it should appear... no?
[06:30] <crabgrass> and i suppose each file is treated as a seperate case, so it actually doesn't matter at all
[06:30] <crabgrass> nm
[06:30] <prince_jammys> crabgrass: what you might need is to stick it inside of \( \)
[06:30] <wildbat> bushy_halp, what you need?
[06:30] <prince_jammys> crabgrass: \( -iname foo -o -iname bar \) -exec ...
[06:31] <crabgrass> prince_jammys: ah, okay. lemmie see how it works
[06:31] <bushy_halp> i need to make a partition a vdi
[06:31] <prince_jammys> crabgrass: that should work. you need to escape the ( ) the same way you escape ';', so the shell doesn't touch those args.
[06:31] <bushy_halp> so that virtual box can install windows in
[06:31] <crabgrass> find . -iname '*.jpg' -o -iname '*.jpeg' -exec cp '{}' test/wut \; didn'
[06:31] <theadmin> bushy_halp: I think people in #virtualbox can help somewhat
[06:31] <crabgrass> didn't work at all lol
[06:31] <banker247>  is there a way to do a chmod 777 for an entire directory?
[06:31] <jrtayloriv> theadmin, doh! Yes it does. Thank you.
[06:32] <prince_jammys> crabgrass: \( \)
[06:32] <theadmin> banker247: chmod -R 777 yourfolder
[06:32] <banker247> nice -.. thx ;)
[06:32] <crabgrass> prince_jammys: it's telling me that i've used a binary operator with nothing before it.
[06:32] <wildbat> bushy_halp, let me guess you wanna mount the partition inside the vbox ?
[06:32] <Smeh> anyone able to provide any helpful pointers / anything re : getting the 4.8.02.0030 linux cisco vpn client to compile on ubuntu 10.04?
[06:32] <monokrome> Does anyone know how to create a bootable device from an ISO
[06:33] <Smeh> i've fixed the CFLAGS complaint but no dice still
[06:33] <Gnea> MikeChelen: there is a program called fluidsynth that, I believe, acts like a bridge between a midi device and a plethora of gui programs to help distinguish midi data
[06:33] <theadmin> monokrome: Take a look at unetbootin and usb-creator...
[06:33] <_jesse_> monokrome: you can try netbootin
[06:33] <monokrome> I'm trying to mount with loopback, but it wont make the device bootable...
[06:33] <monokrome> theadmin: Trying to do a local mount
[06:33] <prince_jammys> crabgrass: find . \( -iname '*.jpg' -o -iname '*.jpeg \) -exec echo yourcommand {} \;
[06:33] <Gnea> MikeChelen: http://sourceforge.net/apps/trac/fluidsynth/wiki/Applications  has a list of applications that fluidsynth utilizes, and I think some of them are already in the repository
[06:33] <bushy_halp> no one is there now
[06:34] <prince_jammys> crabgrass: with properly close single-quote :)
[06:34] <Gnea> MikeChelen: i think FluidGUI is what  you're after
[06:34] <crabgrass> haha
[06:34] <santhosh_Ejanthk> hi can any one tell me how to chat with developer
[06:34] <monokrome> sudo mount -t iso9660 -o loop my.iso temp
[06:34] <wildbat> !vbox
[06:34] <MikeChelen> Gnea, sounds interesting, going to check that out
[06:35] <Gnea> MikeChelen: I've heard good things about MusE, too
[06:35] <crabgrass> prince_jammys: now it's telling me it was expecting to find a ) but didn't.
[06:35] <prince_jammys> crabgrass: typo!
[06:35] <crabgrass> prince_jammys: i'll just do what i normally do, copy-paste and use a lot of &&'s
[06:35] <prince_jammys> proofread
[06:35] <MikeChelen> Gnea, tried muse and liked it for other related features, maybe there is some way it can do this too
[06:35] <criminy> hello \o/
[06:36] <crabgrass> neeevermind, i got it. needed a space before \)
[06:36] <prince_jammys> crabgrass: put an echo before the command you'll exec so you get to see what would happen.
[06:36] <ZeiP> I just overwrote a lot of my /etc files with versions from an older computer, and I'm afraid it won't boot if I reboot without reverting the changes. I'm thinking of moving /etc to another name and recreating it. How can I recreate all the config files in /etc with apt?
[06:36] <charles_> Hello
[06:36] <theadmin> o_O
[06:37] <charles_> How's it going??
[06:37] <charles_> Is there a topic??
[06:37] <prince_jammys> ZeiP: very unhappily
[06:37] <corinth> What's the command to add a ppa again?
[06:37] <administrator> hei
[06:37] <Guest59509> boy
[06:37] <Guest59509> is
[06:37] <ZeiP> prince_jammys, there isn't a way to do that?
[06:38] <prince_jammys> ZeiP: not a way that i would prefer over reinstalling, and i'm pretty patient
[06:38] <charles_> This is a good OS
[06:38] <theadmin> corinth: add-apt-repository
[06:38] <Guest59509> where are you ?
[06:38] <ZeiP> prince_jammys, blah. Ok.
[06:38] <banker247> whats default root username for mysql?
[06:38] <theadmin> banker247: root
[06:38] <_jesse_> banker247: usually 'root'
[06:38] <edbian> charles_, yes.  Yes it is.
[06:38] <BGL-[2]> what's a popular video editor ?
[06:39] <prince_jammys> ZeiP: if you're adventurous, try to reboot (first get a live CD to get back in if you fail)
[06:39] <thune3> ZeiP: you could try running "debsums -ac" to see many of the files that changed
[06:39] <theadmin> BGL-[2]: Tons of em, what's wrong with built-in one?
[06:39] <crabgrass> BGL-[2]: cinelerra, but be prepared to spend a little while getting used to it
[06:39] <ZeiP> prince_jammys, is it at least possible to have a dump of all the packages installed with aptitude / synaptic so I can reinstall them easily?
[06:39] <Guest59509> why don't you use windows?
[06:39] <prince_jammys> !clone > ZeiP
[06:39] <theadmin> Guest59509: We don't want to, that's all.
[06:39] <BGL-[2]> theadmin: which built in one?
[06:39] <banker247> so i setup an apache and mysql server.. and all that got the /var/www/localhost yadda yada.. but whats it all for.. :)
[06:40] <theadmin> BGL-[2]: Err... Pitivo if I recall correctly, I removed it
[06:40] <banker247> just tried to install some CRM software and it made me setup all these servers ;). .i finally did it..
[06:40] <BGL-[2]> pitivi hmm i duno i guess i missed it
[06:40] <prince_jammys> ZeiP: use what the bot said, and save you home directory if you choose to reinstall
[06:40] <BGL-[2]> i'll check that out first
[06:40] <BGL-[2]> crab: thx for the other suggestion too
[06:40] <charles_> I wanted to do a reformat of my windows xp, but all I could do is a complete restore, using the HP recovery disks.  I don't have a stand alone copy of xp
[06:40] <thune3> !clone > thune3
[06:40] <crabgrass> theadmin: pitivi
[06:41] <crabgrass> !isThereAnEchoInHereOrIsItJustMe > ubottu
[06:41] <Archimend> How can I run minimal install CD from a partition ? I can run it by grub, but it wants CD
[06:41] <charles_> I heard of Ubuntu and decided to try it, and I like it
[06:41] <theadmin> Archimend: So you want to boot an ISO, basically?
[06:42] <prince_jammys> charles_: i'm afraid we have to ask you for your registration number, to see if you have a legit version of ubuntu.
[06:42] <crabgrass> theadmin: can i use -iname to exclude files? for instance, anything starting with foo. like... -iname !foo*
[06:42] <theadmin> prince_jammys: Bad joke...
[06:42] <prince_jammys> crabgrass: ! -iname 'foo*'
[06:42] <prince_jammys> theadmin: thanks!
[06:43] <crabgrass> prince_jammys: ah, had the ! in the wrong place. thanks again!
[06:43] <theadmin> prince_jammys: You know, there ARE people who think that a free OS is impossible
[06:43] <prince_jammys> methinks he/she/it knew i was kidding
[06:44] <ZeiP> prince_jammys, thanks. /home is on a different partition for this exact reason :P
[06:44] <prince_jammys> ZeiP: ah, good news.
[06:44] <prince_jammys> ZeiP: then i'd say to back up /etc, but i guess that doesn't apply to you :)
[06:44] <ZeiP> I'll back it up, but I don't think I can do anything with the backup... :D
[06:44] <Archimend> theadmin, I want to run installation, I can run it no problem by extracted iso to a partition. if I could boot iso from partition it shoud fix it I guess
[06:46] <gichity> Am trying to install ubuntustudio from an alternate DVD on hard disk. After i have successfully partitioned and intending to install ubuntustudio i get a "Debootstrap error.. Failed to determine the codename for release". What is the solution?
[06:47] <Guest59509> install windows
[06:47] <_jesse_> gichity: not to put you off, but there is a #ubuntustudio channel that might be more helpful :)
[06:47] <Guest59509> is the best solution
[06:47] <prince_jammys> 'apt-get install windows' ?
[06:47] <Guest59509> haha
[06:48] <edbian> prince_jammys, please, use aptitude
[06:48] <theadmin> somebody get the troll outta here
[06:48] <gichity> _jesse_: av bin there. no answer yet
[06:48] <prince_jammys> edbian: true, sorry. plus i missed sudo.
[06:48] <_jesse_> gichity: ah kk, just thought I'd suggest
[06:48] <edbian> prince_jammys, ha ha
[06:48] <crabgrass> psuedocode time; is it possible to do something like if ( exist(x_250) && exist(x_500) ) then rm x_250 ) in bash, where each x would be a *, but for the conditional they'd have to match
[06:49] <crabgrass> just noticed i'm getting duplicate files, but they're in different resolutions. i just want the highest-res one
[06:49] <crabgrass> *ones
[06:49] <prince_jammys> crabgrass: time for you to go to #bash and read the guide in the channel topic.
[06:49] <crabgrass> prince_jammys: alrightie then
[06:49] <prince_jammys> crabgrass: it's a very good channel, with a good guide.
[06:50] <crabgrass> i feel like i've leveled out of the newbie zone or something
[06:50] <crabgrass> haha
[06:50] <prince_jammys> don't expect anyone to answer the question though, you'd have to read about the basics
[06:50] <crabgrass> yeah, true story.
[06:50] <prince_jammys> /topic bash will show you a guide
[06:50] <edbian> crabgrass, Def.  Bash scripting is an awesome power once you're decent at it :)
[06:51] <crabgrass> edbian: i know enough to get my way around, but not enough to weild it yet
[06:51] <radikal> hey good night every body, i loss my sound  i can"t hear nothing and tje ststem is ok not mute
[06:51] <radikal> sombody can help me
[06:51] <wildbat> !sound
[06:52] <zcat[1]> ... but first of all check that the speakers haven't been accidentally unplugged (power or audio) ;)
[06:52] <edbian> crabgrass, Have fun learning! :)
[06:52] <crabgrass> edbian: sure will! thanks!
[06:52] <prince_jammys> well, make sure the computer is on
[06:52] <Guest59509> what is the popular mp
[06:52] <Guest59509> 3
[06:52] <Guest59509> player ?
[06:52] <prince_jammys> !players > Guest59509
[06:52] <theadmin> Guest59509: VLC plays everything :P
[06:52] <radikal> yeah im try that but the sound output  say dumm out put
[06:53] <roachmmflhyr> Guest59509: I like totem
[06:54] <Smeh> anyone able to provide any helpful pointers / anything re : getting the 4.8.02.0030 linux cisco vpn client to compile on ubuntu 10.04?
[06:54] <radikal> nop, i have speaker on my monitor  frist and don"t work, and  second  i have usb speakers and don"t work too and im installet it pulseaudio and etc.
[06:55] <Smeh> i've fixed the CFLAGS complaint but no dice still
[06:55] <Lint01> any analogs of rhythmbox/banshee/exaile exist in Ubuntu?
[06:56] <prince_jammys> Lint01: huh?
[06:56] <radikal> ok, im thinking to resotr my ubuntu to frist time instalation  some body know how to due that or i need re-install ubuntu
[06:57] <hariom_> hi, I have recorded few files on my ubuntu system using a mike. But on playback it is not outputting any audio. When I play the same file on windows system, I can hear the sound. What can be problem?
[06:57] <marenostrum> Hello Dear Friends. We use # sign at the beginning of a line to uncomment it in some configuration files (hosts, in my case). What can I use to uncomment a group of lines? Is it possible to put something before and after that group of lines so system not to read them?
[06:57] <Jordan_U> Archimend: Use the mini.iso (netboot) instead.
[06:58] <prince_jammys> marenostrum: depends on the language. in config files, usually "no"
[06:58] <marenostrum> thanks
[06:58] <m3ga> booting lucid from grub and X doesn't start properly. is there a way to tell grub to tell linux not to start X?
[06:58] <hariom_> My files .wav files and they have size like 250KB for a 10 sec audio.
[06:59] <Squideshi> I shrunk my Ubuntu partition and now can't mount it. After attempting to mount, I ran "dmesg | tail" and saw "EXT4-fs (sda5): bad geometry: block count 5197568 exceeds size of device (5197464 blocks)". What does this mean?
[06:59] <_jesse_> marenostrum: you can use '#' to comment lines in /etc/hosts
[06:59] <Lint01> marenostrum, not in hosts
[07:00] <_jesse_> Lint01: there is definitely a comment in my hosts using a #
[07:00] <prince_jammys> man hosts: ''Text  from a "#" character until the end of the line is a comment, and is ignored.''
[07:00] <Lint01> _jesse_, it's line comment, he meant block comments
[07:00] <marenostrum> _jesse: Yes I use # to comment-out lines in /etc/hosts. I seek a similar way for more than one line.
[07:00] <_jesse_> Lint01: ah missed the 'groups' part
[07:00] <hariom_> can anybody help. Why I am not able to listen any audio using play command or vlc player. Same file plays on other system
[07:01] <marenostrum> Lint01: Thanks you. I'll comment-out them one by one.
[07:01] <_jesse_> marenostrum: no, but most editors make it pretty easy to comment/uncomment groups of lines
[07:01] <_jesse_> one-by-one
[07:02] <gichity> hariom_: do other audio applications work?
[07:02] <marenostrum> _jesse: Thank you very much. I'm a non-coder try to mimic coders! :-)
[07:02] <prince_jammys> vim: ESC v j j j j j j j j j j j j j j j j j : s/^/#/
[07:02] <banker247> how to provide read write access for all users to a specific file? is this recursvly?
[07:02] <hariom_> yea, I can listen youtube and other downloaded files
[07:02] <crabgrass> prince_jammys: you seem knoledgeable; know of any way to download images from a website? currently using httrack for it
[07:03] <hariom_> Only the files recorded by myself are not audible.
[07:03] <prince_jammys> crabgrass: wget URL ?
[07:03] <lipalm> hi, is there a doc somewhere that would explain how to setup an ICH9R raid array on lucid (no OS on the array)
[07:03] <prince_jammys> crabgrass: were you asking about mirroring earlier?
[07:03] <_jesse_> marenostrum: :)
[07:03] <crabgrass> prince_jammys: i tried that, but ended up getting about 800 robots.txt's for each image. i wasn't at all happy with wget.
[07:04] <crabgrass> and yeah, i was
[07:04] <_jesse_> banker247: if the file belongs to the users group you can do chmod g+rw file
[07:04] <prince_jammys> crabgrass: ah. i don't know wget's fancy features, end up having to read manual.
[07:04] <banker247> an entire folder
[07:04] <prince_jammys> crabgrass: (secret) you can cheat an bypass robots
[07:04] <gtoy> I can boot only if use nomodeset in the grub otherwise black screen..  now it in 800x600 with noise on the botom..
[07:04] <crabgrass> same here. -H seemed to be what i needed, but the whole process was just so damned painful and slow
[07:05] <gichity> harriom_: how are you recording? using ua soundcard?
[07:05] <crabgrass> prince_jammys: yeah, but that's not really the issue
[07:05] <banker247> _jesse_ basically what i'm trying to do i'm running vtigerCRM.. and i'm trying to make it so when i open it in my browser i can actually make accounts..
[07:05] <gichity> hariom_: how are you recording? using ua soundcard?
[07:05] <banker247> _jesse_ beacuse whats happening when i try to make anything in the program its just going to a blank page and saying done at the bottom
[07:06] <theadmin> Is there a way to make metacity tell me the size of a specific window?
[07:06] <hariom_> I have mike connected using sound recorder to record. I can hear the same file on my windows machine.
[07:06] <_jesse_> banker247: ah I'm not famaliar that program
[07:06] <_jesse_> banker247: you can do folders with chmod -R
[07:06] <_jesse_> to do recursive
[07:07] <banker247> i think its a serverside issue
[07:07] <Appl6> theadmin: In what units, output it where, and from a program or just by you clicking around the screen?
[07:07] <banker247> can't seem to write files
[07:07] <Lint01> any analogs of rhythmbox/banshee/exaile exist in Ubuntu?
[07:07] <gichity> hariom_: try to play the file using a different media player..
[07:07] <theadmin> Appl6: Pixels, to STDOUT (prefferably)
[07:08] <taiyal> is there any way to prune all of the "no installation candidate" apt entries in Ubuntu?
[07:08] <prince_jammys> theadmin: see if 'xwininfo' helps
[07:08] <taiyal> the Ubuntu repositories have quite a few (sagemath, dillo, etc)
[07:08] <theadmin> prince_jammys: Hey thanks
[07:08] <prince_jammys> theadmin: welcome
[07:09] <theadmin> Where can I find the "fixedsys" font for Ubuntu?
[07:09] <theadmin> I heard it is available
[07:10] <banker247> _jesse_ are you faimiliar with apache?
[07:10] <Appl6> theadmin: http://stackoverflow.com/questions/73087/x-gnome-how-to-measure-the-geometry-of-an-open-window
[07:10] <_jesse_> banker247: I can do basic configurations
[07:10] <banker247> _jesse_ how do i check if apache server has proper read permissions?
[07:11] <_jesse_> banker247: to a directory? you should chown the directory to whatever apache is running (usually www-data)
[07:11] <banker247> whats chown?
[07:11] <_jesse_> banker247: change owner
[07:11] <banker247> so i need to chown my /var/www/vtigercrm
[07:11] <theadmin> banker247: CHange OWNership
[07:11] <iIlL10oO> the boot screen splash of arch's , is so linuxly
[07:11] <banker247> whats the command?
[07:11] <theadmin> banker247: (sudo)? chown -R vtigercrm /var/www
[07:11] <prince_jammys> chown with care.
[07:12] <_jesse_> banker247: nah, so long as it's world readable you shouldn't have a problem, apache will need write permissions on certain directories within that one thoug likely
[07:12] <no-name> does wine run much better in 64 bit ubuntu?
[07:12] <Guest97480> hey, i've got internal bluetooth device on CQ40-504, it was detected on win7 but not on lucid. how do i use the device?
[07:12] <_jesse_> banker247: shouldn't need to own the whole diretocy though
[07:12] <banker247> i need to give apache full access of the directory i think
[07:12] <theadmin> no-name: I'd say worse.
[07:12] <no-name> ok
[07:12] <_jesse_> banker247: ah alright, if you say so... chown -R www-data:www-data direcotry
[07:12] <no-name> it sucks
[07:12] <theadmin> banker247: It'd better to be owned by user 'daemon' and group 'www-data', just give it world access.
[07:13] <no-name> i like ubuntu a lot better than windows , but i'm a gamer and linux is fail at games :(
[07:13] <_jesse_> mmm true theadmin has a good point
[07:13] <Lint01> no-name, use VM intead of WIne
[07:13] <_jesse_> banker247: just make sure the group has write permissions
[07:13] <banker247> theadmin ok.. so what do i type to give apahce access to /var/www/vtigercrm
[07:13] <theadmin> no-name: Wait till VALVe release Linux version of Source engine and game is on :D
[07:13] <no-name> Lint01: which one is best for games?
[07:13] <_jesse_> banker247: chown -R your_username:www-data directory
[07:14] <Lint01> or just install Windows for your games, it's unlikely the Wine will catch up anytime soon
[07:14] <Appl6> theadmin: http://fixedsys.moviecorner.de/?p=download&l=1
[07:14] <theadmin> banker247: Copy-paste this in: sudo chown -R $USER:www-data /var/www
[07:14] <theadmin> Appl6: Thanks
[07:14] <basncy> excuse me ,what does pseudoheader mean in UNIX Programing
[07:14] <prince_jammys> or add your user to www-data group
[07:14] <_jesse_> no-name: you'll need to dual boot for that wine no VM will be anywhere close to running games
[07:14] <_jesse_> *nor
[07:14] <theadmin> banker247: Do not replace $USER with anything :D It's a variable which has the current username
[07:14] <Lint01> no-name, I'd try vmware; because openbox has no 3d support despite all the lies in docs
[07:15] <no-name> Lint01: you mean virtualbox?
[07:15] <banker247> ok got it
[07:15] <Lint01> yeap
[07:15] <no-name> oh
[07:15] <_jesse_> it has *experimental* 3d support
[07:15] <no-name> someone told me he could run crysis in virtualbox
[07:15] <no-name> must have been a lie :P
[07:15] <_jesse_> ha no way
[07:16] <no-name> I tried to change the VRAM in vmware workstation 7 today
[07:16] <no-name> i used an option that you add to the vmx to change it and it wouldn't boot after that
[07:16] <Eugene89> Hello guys, I'm using a python script involving ncftp and cron to backup some sql databases automatically, but i find that the filename, when copied over to the ftp, changes to things like M6D0V0~0.GZ
[07:16] <no-name> set it to 128mb, then 64mb, no-go
[07:16] <Eugene89> any idea on how to fix that?
[07:17] <no-name> even after I got rid of the line in the vmx file it wouldn't boot, strangely enough
[07:17] <no-name> Lint01: do you know how to change the amount of RAM for the vmware graphics card?
[07:17] <Lint01> no
[07:18] <Guest97480> hey, i've got internal bluetooth device on CQ40-504, it was detected on win7 but not on lucid. how do i use the device?
[07:19] <_jesse_> !bluetooth > Guest97480
[07:20] <SandGorgon> anybody having trouble with Windows 7 booting and corrupting Grub installs ? Supergrub's page recommends removing stage1.5
[07:20] <_jesse_> SandGorgon: windows usually overwrites grub if you install it, but you can get it back with live CD
[07:20] <_jesse_> SandGorgon: least that's my experience
[07:21] <theadmin> yeah, windows is stupid enough to overwrite grub
[07:21] <Guest97480> jesse, its not dell its compaq
[07:21] <_jesse_> Guest97480: ?
[07:21] <banker247> is there a way to check what permissions a folder has?
[07:21] <_jesse_> ls -l
[07:21] <_jesse_> banker247: ^
[07:21] <theadmin> banker247: ls -l | grep yourfolder
[07:21] <theadmin> Or rather...
[07:22] <prince_jammys> ls -ld TheDirectory
[07:22] <Guest97480> the bluetooth module, its compaq. the page on ubottu u gave they refer to dell
[07:22] <SandGorgon> theadmin,  _jesse_, no thasts not what I meant .. that's the easy part. Windows 7 is _already_ installed.. install ubuntu on top and still Windows 7 corrupts grub http://www.supergrubdisk.org/wiki/WindowsErasesGrub
[07:22] <banker247> drwxrwxrwx 28 root www-data 4096 2010-06-11 00:54 vtigercrm
[07:22] <theadmin> banker247: That's 777
[07:22] <banker247> its not showing that www.data has access?
[07:22] <_jesse_> banker247: well that is 777 so *everyone* can read/write/execute
[07:22] <banker247> so www.data can read it?
[07:22] <theadmin> banker247: Yes, it's ugorwx
[07:22] <prince_jammys> my grandma can read it
[07:23] <_jesse_> prince_jammys: lmao
[07:23] <prince_jammys> 777 rarely needed
[07:23] <greezmunkey> without his glasses even :)
[07:23] <_jesse_> *his*? the plot thickens...
[07:23] <banker247> tryin to figure out why i'm just getting blank pages when i try to create things in my CRM
[07:23] <prince_jammys> my grandma is a woman. well, was.
[07:23] <prince_jammys> were she living, she could read it.
[07:23] <pepePlu> for shell scripters, i have a list of more than 30k records, or text file with 30000 lines, each line has a record its fields seperated with tabs, now i want to go through each line take the data and insert text between them... how do i go about that
[07:23] <greezmunkey> thought I read grandpa, my respects, sorry.
[07:23] <prince_jammys> it's all good.
[07:24] <greezmunkey> I need glasses :)
[07:24] <Andorin> Does anyone know whether it's possible to change Debian's libnotify to look and function like Ubuntu's?
[07:24] <_jesse_> banker247: it's likely a problem with the CRM not file permissions
[07:25] <banker247> or the configuration of my server..
[07:25] <prince_jammys> Andorin: a question that'll get you into irc channel limbo
[07:25] <prince_jammys> Andorin: ha, i see it in #debian too :)
[07:25] <Andorin> prince_jammys: Mmhmm
[07:26] <Andorin> I really like Ubuntu's libnotify and really hate Debian's. =/
[07:26] <gabriel_> Hola
[07:27] <Eugene89> if i really wanna be good at linux, really understand it indepth and compile stuff by myself, where should i start?
[07:28] <Dracco> Eugene89, try www.ss64.com
[07:28] <Eugene89> sick and tired of knowing bits and pieces without really knowing it
[07:28]  * ActionParsnip is a zombie
[07:28] <prince_jammys> Eugene89: begin by reading a generalized guide, maybe from the internet, or debian sysadmin guide (installable through APT), or something like rutebook (also APT)
[07:28] <greezmunkey> ActionParsnip: brain eater??
[07:28] <bazhang> !manual | Eugene89 check this
[07:28] <xsist10> Eugene89: Probably understanding the layout of linux's file structure -> http://en.wikipedia.org/wiki/Filesystem_Hierarchy_Standard
[07:29] <ActionParsnip> Greezmunky: just tired
[07:29] <Dracco> Guys, I've got a question. I was wondering if it is possible to shutdown linux after for example 5 seconds? Important is that I want seconds delay, not minutes
[07:29] <Andorin> prince_jammys: But what did you mean by "IRC limbo"?
[07:29] <Jordan_U> SandGorgon: Do you have a Dell?
[07:29] <prince_jammys> Andorin: i mean people in #debian will direct you to #ubuntu and vice-versa. you'll be in channel limbo.
[07:29] <Eugene89> xsist10: that really helps! thanks!
[07:29] <ActionParsnip> Dracco: shutdown -h +5 (check man shutdown for exact command but its like that)
[07:30] <Eugene89> prince_jammys: will read the debian sysadmin guide
[07:30] <Dracco> +5 will shutdown in 5 minutes
[07:30] <ActionParsnip> Dracco: will require sudo too
[07:30] <Dracco> I want seconds
[07:30] <prince_jammys> Eugene89: get 'em all
[07:30] <ActionParsnip> Dracco: sleep 5; sudo shutdown -h now
[07:30] <Eugene89> all?
[07:30] <Andorin> prince_jammys: D:
[07:30] <banker247> how to check current php version?
[07:30] <Jordan_U> SandGorgon: The real solution is to remove the horribly broken software that's overwriting grub (likely "Dell DataSafe" but it could be something else)
[07:31] <Dracco> and is it possible to break that 5 seconds? so i can stop shutting down?
[07:31] <prince_jammys> Eugene89: the sysadmin thing, rutebook (so-so general book about linux), and some URLs others sent you.
[07:31] <ActionParsnip> Banker247: dpkg -l | grep php ,maybe
[07:31] <ActionParsnip> Dracco: sure, press ctrl+c
[07:31] <Eugene89> prince_jammys: I will. Thank you
[07:31] <Dracco> and if im not in terminal? :P
[07:31] <prince_jammys> welcome
[07:31] <ActionParsnip> Dracco: but if you are too late its going down
[07:32] <jungli> ubantards
[07:32] <banker247> if i need to downgrade from php 5.3 to php 5.2 whats the easiest way to do it without screwing anything up?
[07:32] <Dracco> coz i wanted to put 5 seconds delay on powering off when i press power button
[07:32] <prince_jammys> jungli: /j #ubantu
[07:32] <ActionParsnip> Dracco: not sure there mate, you could ssh in and kill the process maybe. Not sure
[07:32] <robberhater> Running Ubuntu 8.04 Server LTS here
[07:32] <jungli> hi prince_jammys
[07:32] <prince_jammys> hello
[07:32] <indus> Dracco, maybe a setting in bios where time can be increased?
[07:32] <robberhater> I can't seem to start up a Fedora 12 PV guest here
[07:32] <jungli> hi indus bhiaya
[07:33] <indus> namaste
[07:33] <robberhater> I'm getting this error every time I attempt to start up the guest: Error: (2, 'Invalid kernel', 'xc_dom_find_loader: no loader found\n')
[07:33] <trupheenix> hi does anyone know how to disable public key authentication on openssh-server? i want to use password login
[07:33] <jungli> indus: kaha the itne din ?
[07:33] <Dracco> i wanted something more like command for shortcut
[07:33] <xsist10> Dracco:  This might work: shutdown -c
[07:33] <_jesse_> Dracco: mine usually requites me to hold it in for so long, might be a BIOS setting as indus suggests
[07:33] <Charbel> i installed java and i'm trying to connect to irc chat network from web but i got always this message "Sorry, but you need a Java 1.1.x enabled browser to use Beirut Chat."
[07:33] <indus> jungli, how can we help you
[07:33] <Dracco> but anyway thanks :)
[07:33] <bazhang> jungli, that's not appropriate here
[07:33] <robberhater> Fedora 12 for a fact does have a pv_ops kernel that's basically a domU
[07:33] <jungli> indus: sup
[07:33] <_jesse_> Dracco: so when you shutdown from within ubuntu, not a hard shutdown?
[07:33] <Dracco> xsist10, i want to break sleep5; shutdown
[07:33] <robberhater> can somebody here explain what I should do to get Ubuntu to boot the FC12 PV Guest?
[07:34] <ActionParsnip> Charbel: if you websearch for java tester, does it show you running java ok?
[07:34] <Dracco> _jesse_, i want to break 5 seconds delay powerdown, not hard power off :P
[07:34] <_jesse_> Dracco: ah you confused me with the "when you press the power button" :P
[07:34] <Dracco> anyway, ill need to work on a script maybe, simple commands wont work here
[07:34] <ActionParsnip> Robberhater: i'd ask in #fedora as the guest is the OS having the issue
[07:34] <xsist10> Dracco:  well if you put it in a bash script, you could potentially kill the scripts thread?
[07:34] <jungli> indus: how you doing
[07:34] <indus> jungli, good thanks
[07:34] <Charbel> ActionParsnip, how ?
[07:34] <_jesse_> Dracco: doesn't ubuntu give you a 30s buffer anyway?
[07:34] <banker247> whats the best way to downgrade php 5.3 to php 5.2?
[07:35] <bazhang> jungli, do you have a ubuntu support question?
[07:35] <Dracco> xsist10, thats what ill do ;)
[07:35] <jungli> indus: pm
[07:35] <Dracco> _jesse_, ubuntu gives only minutes delay, so minimum is 0 or 1
[07:35] <theadmin> banker247: Downgrading is not supported. However, you can compile 5.2 from source.
[07:35] <indus> jungli, no random chats here, please ask a question if you have
[07:35] <trupheenix> hi does anyone know how to disable public key authentication on openssh-server? i want to use password login
[07:35] <ActionParsnip> Charbel: use a websearch engine and find: java tester ,the top few links will be able to tell you if your java is working ok
[07:35] <_jesse_> Dracco: I mean when I click the power symbol and click "shutdown" it gives me an optino to abort
[07:36] <Charbel> ok ActionParsnip thx
[07:36] <ActionParsnip> trupheenix: look in /etc/ssh/sshd_config (I think its that file).
[07:36] <Dracco> _jesse_, yes, but my xubuntu doesnt even show popup msg with options shutdown, restart, logout etc when i press power button >.<
[07:36] <rtronk> how do i add a user, /usr/sbin/useradd with a home directory /home/username and a password?
[07:36] <_jesse_> Dracco: ah 'xubuntu', sorry, I didn't know what distro you were running
[07:36] <trupheenix> ActionParsnip, yea i am looking at it but i can't understand which option should i disable. nothing conclusive online either.
[07:36] <rtronk> (command line)
[07:36] <rtronk> !useradd
[07:36] <lipalm> anybody running a raid array off an ICH9R based board ?
[07:37] <x_> hi. i am on lucid. how do i read my cpu info ... temperature, freq and voltage?
[07:37] <prince_jammys> rtronk: use 'adduser'
[07:37] <Dracco> _jesse_, ill just work on a script then :)
[07:37] <Dracco> thanks all for help, gotta run, cya and have a nice day ;)
[07:37] <thune3> Dracco: sleep 5s && shutdown might be breakable
[07:37] <prince_jammys> rtronk: see the man page. the usage is fairly simple, as simple as 'sudo adduser somedude'
[07:37] <jungli> bazhang: sup
[07:37] <Dracco> thune3, but not with simple console command ;)
[07:37] <Dracco> cya all :P
[07:37] <uo3273-fvarklb> Hello.  I need some help from someone who is knowledgeable about "viruses" detected by KlamAV.  The following thread on Ubuntu forums describes my situation exactly: http://wwww.ubuntuforums.org/showthread.php?p=9170734
[07:38] <bazhang> jungli, chat in #ubuntu-offtopic NOT here
[07:38] <theadmin> x_: cat /proc/cpuinfo
[07:38] <uo3273-fvarklb> Sorry, it's http://ubuntuforums.org/showthread.php?p=9170734
[07:38] <banker247> are many people not upgrading to php 5.3 and sticking with 5.2?
[07:39] <prince_jammys> banker247: you may want to ask at #php
[07:39] <x_> theadmin, ty. i cannot find the temperature and voltage in the output
[07:39] <theadmin> x_: Well yeah :/
[07:39] <theadmin> x_: I think you need lmsensors or whaddayacallit for that
[07:39] <uo3273-fvarklb> theadmin: Could you help me?  Did you see the link I posted?  I've talked to you before ...
[07:39] <bazhang> !sensors
[07:40] <x_> i have installed lm_sensors ... i now want to read the temp and voltage
[07:40] <indus> lm sensors can be very inaccurate because the mobo sensors are crap mostly
[07:40] <ActionParsnip> trupheenix: just trying to get a guide
[07:40] <trupheenix> ActionParsnip, me too
[07:40] <theadmin> uo3273-fvarklb: Sorry I am freakin' tired now and can't really help on serious problems :D
[07:40] <banker247> sed s/lucid/karmic/g /etc/apt/sources.list | sudo tee /etc/apt/sources.list.d/karmic.list
[07:40] <banker247> oops
[07:40] <uo3273-fvarklb> theadmin: That's OK - I understand.
[07:41] <theadmin> banker247: That's a weird thing to do
[07:41] <banker247> http://www.nickveenhof.be/blog/reverting-or-downgrading-php-53-52-ubuntu-lucid-lynx-1004
[07:41] <uo3273-fvarklb> Can anyone else help me understand this better?: http://ubuntuforums.org/showthread.php?p=9170734
[07:41] <indus> x_, anyways, once you install lm-sensors, type sensord in terminal and answer yes / no
[07:41] <ActionParsnip> trupheenix: http://www.debuntu.org/ssh-key-based-authentication-p2
[07:41] <indus> x_, then restart and type 'sensors' and it will give output
[07:41] <x_> ok sensors tells me core0 and core1 temp ... lol but i am on a single core machine?
[07:41] <indus> x_, but it all depends on mobo sensor which is wrong quite a few times
[07:42] <ActionParsnip> trupheenix: commaent out the lines it mentions then run the reload command. You should now be asked for password
[07:42] <khider> Hello all, I bought a blank terrabyte hard drive and a casing to use as an external drive. I formatted it and put in a file system--but I do not have write ownership permissions to make folders and back stuff up. What should I do?
[07:42] <uo3273-fvarklb> Is anyone knowledgeable about KlamAV - and the bugs/errors it has had?
[07:42] <KB1JWQ> khider: What filesystems?
[07:42] <genewitch> is there an apt-find program?
[07:42] <KB1JWQ> !tell uo3273-fvarklb anyone
[07:42] <banker247> theadmin what'd it do?
[07:42] <x_> indus, my core0 temp is 42 C and my core1 temp is 49 C .. i am guessing core0 is actually my hdd temp?
[07:42] <KB1JWQ> !anyone | uo3273-fvarklb
[07:42] <theadmin> genewitch: apt-cache search query
[07:42] <khider> KB1JWQ:I tried ext 3 and ext 4
[07:43] <KB1JWQ> khider: Mount them read/write?
[07:43] <indus> x_, no its the cpu core and i assume you have a dual or 4 core
[07:43] <trupheenix> ActionParsnip, ok but i keeping this Permission denied (publickey).
[07:43] <khider> KB1JWQ: It says the device is busy
[07:43] <theadmin> banker247: It'd replace all Lucid sources with Karmic and put it in /etc/apt/sources.list.d/karmic, no?
[07:43] <banker247> i guess
[07:43] <indus> x_, it reports temp of each core so core 0, core 1 , core 2 etc ,
[07:43] <banker247> its for downgrading
[07:43] <KB1JWQ> khider: Okay, forcibly unmount it, and mount it read write.
[07:43] <genewitch> theadmin: I know, thanks, but that doesn't answer my question
[07:43] <indus> x_, dont rely on it too much man, its junk
[07:43] <x_> ty indus ... now to find out the voltage my cpu is runnning at
[07:44] <indus> x_, check bios for voltages
[07:44] <theadmin> genewitch: It does what you described, finds packages in apt
[07:44] <khider> KB1JWQ: Dolphin always pops up and identifies it and says it is already mounted
[07:44] <indus> x_, its better
[07:44] <indus> x_, lm-sensors give too many wrong outputs
[07:44] <uo3273-fvarklb> When I ran a scan on KlamAV  - it brought up all these Encrypted.ZIP files in my /usr/lib directory.  Are these false positives or a Windows virus - or nothing at all?
[07:44] <x_> yah .. i am trying to get cpu scaling to work ... it works on tthe freq ... but i want to check my undervolt success
[07:44] <khider> KB1JWQ: Maybe I did not format it correctly
[07:44] <theadmin> banker247: It won't downgrade like that, APT preffers higher versions to older ones
[07:44] <indus> x_, ah i too have undervolted my x3
[07:44] <theadmin> banker247: You'll just end up breakin it
[07:44] <ActionParsnip> trupheenix: could try: sudo apt-get --purge remove openssh-server; sudo apt-get --purge autoremove; sudo apt-get install openssh-server ,see if that gives you vanilla settings
[07:44] <x_> any way to use lm-sensors to report voltage?
[07:45] <indus> x_, yes it reports all things
[07:45] <ActionParsnip> !downgrade | banker247
[07:45] <indus> x_, just install and run the steps i said
[07:45] <trupheenix> ActionParsnip, I am on Amazon EC2 :( can't remove ssh server. then i won't be able to access.
[07:45] <x_> ok indus  ... i tried sensors .. will now run sensorsd
[07:45] <banker247> i'm downgrading my php
[07:45] <KB1JWQ> uo3273-fvarklb: Have an example of a file it's alerting on?
[07:45] <banker247> from 5.3 to 5.2
[07:45] <indus> x_, just 'sensord'
[07:45] <ActionParsnip> trupheenix: I don't know what that is
[07:45] <x_> oh ok
[07:46] <khider> KB1JWQ: Now I do not even have permission to format it
[07:46] <theadmin> banker247: You can't downgrade. You need to explicitly just install an older version
[07:46] <banker247> theadmin ok how do i undo that last command?
[07:46] <khider> KB1JWQ: There is a lock icon on partition manager and it will not let me do anything
[07:46] <banker247> sed s/lucid/karmic/g /etc/apt/sources.list | sudo tee /etc/apt/sources.list.d/karmic.list
[07:46] <banker247> this thing whatever it did
[07:46] <theadmin> banker247: According to what I saw, "rm /etc/apt/sources.list.d/karmic.list" should do it
[07:46] <prince_jammys> banker247: sudo rm /etc/apt/sources.list.d/karmic.list
[07:47] <uo3273-fvarklb> KB1JWQ: Yeah - just give me a second ...
[07:47] <prince_jammys> ditto
[07:47] <Eugene89> prince_jammsys: Rute Book seems awesome! Thanks!
[07:47] <theadmin> banker247: Then, sudo apt-get install php5~5.2 I guess
[07:47] <prince_jammys> Eugene89: cool.
[07:47] <mcl0vin> howdy folks
[07:47] <banker247> E: Couldn't find package php5~5.2
[07:47] <ActionParsnip> Eugene89: you'll learn more just using the OS than any book can show you
[07:47] <khider> Does anyone know how to format an external drive? I am using partition manager and so far I have permission to do  nothing
[07:47] <prince_jammys> Eugene89: the bash guide in it kinda sucks. for that, see the guide in the #bash irc channel topic.
[07:47] <theadmin> banker247: I forgot how to specify the version :/
[07:48] <x_> indus, i am on lucid ... i installed lm-sensors from the repo .. i dont think it installed sensord
[07:48] <khider> Partition manager identifies it,  but I cannot do anything to the drive
[07:48] <Eugene89> btw, anybody knows why when i copy a file to a ftp server using ncftp, the filename changes to a short version like M9THL5~Y.GZ?
[07:48] <x_> i have sensors ... and sensors-detect
[07:49] <xsist10> Eugene89: sounds like it's trying to make it DOS safe (8 char files names). Maybe a configuration issue?
[07:49] <ActionParsnip> khider: gksudo gparted ,should do it. You can also use: sudo fdisk /dev/disknamehere and make the partiton there (replace disknamehere with the disks actual name. sudo fdisk -l ,will show the names of your disks)
[07:49] <Eugene89> ActionParsnip: Yeah, i have been using the OS pretty much, got 2 redhat servers running as webservers for some sql databases. Managed to setup simple backup cron, raid and stuff, but I feel that I'm walking around blind lol
[07:50] <khider> ActionParsnip: What file system should I use? BSD? DOS? I don't get many options...
[07:50] <ActionParsnip> Khider: is the device going to be used in windows systems?
[07:50] <uo3273-fvarklb> KB1JWQ: OK - here is an example: /usr/lib/openoffice/basis3.1/program/libpackage2.so (name of file), Encrypted.ZIP (name of the problem)
[07:50] <Jimmio> Hey all. I installed kubuntu-desktop on top of ubuntu-desktop. Changed the startup image.. changed the cursor.. can't change it back. Any idea?
[07:50] <happosade> Hello. I am now building (S)FTP-server with RAID5. How to get those FTP-login-files into RAID-state?
[07:50] <khider> ActionParsnip: No, I just want to use it as a drive to  back up files
[07:51] <SandGorgon> Jordan_U, I think ur suggestion about Dell Datasafe worked. let me try it a couple more times just to be sure though.
[07:51] <khider> ActionParsnip: But there is a drop file that gives me a very limited range of choices
[07:51] <thune3> uo3273-fvarklb: https://answers.launchpad.net/ubuntu/+question/88546 post by Cameron W says that there is an option to mark encrypted zip files as viruses. Search http://www.clamav.net/doc/latest/man/clamscan.1.in for encrypted to see option [i'm not excactly sure where you set this option]
[07:51] <banker247> root@banker247:~# apt-get install php5=5.2.1
[07:51] <banker247> sais the version wasn't found
[07:51] <Eugene89> xsist10: thanks. but one of the files copy over as fs-i-11-06-2010-14h01m01s.tar.gz, the rest uses weird filenames. i'm using a python scriptas a cronjob to backup my sql databases on a regular basis
[07:51] <Charbel> ActionParsnip, test results >>> JavaScript   IS WORKING   in your web browser | Your web browser supports JavaScript version 1.8 | Your web browser is Firefox version 3.6.3
[07:51] <x_> ok i ran sensors-detect and it found many sensors ... but i cannot see any voltage reading in my 'sensors' o/p
[07:52] <Jimmio> Also, what package was in 9.10 that isn't here anymore that allowed right click Encrypt/Decrypt of files?
[07:52] <ActionParsnip> Charbel: cool
[07:52] <dukz> hi guys, is there anyway i can benchmark my disk through the terminal? Just two figures i Need, random writes and read
[07:52] <khider> For a back up drive, should I use extended or primary, and what file system, ext 2, 3, or 4?
[07:52] <ActionParsnip> Khider: this shows how to setup a disk in commandline. http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?chap=4&part=1
[07:53]  * gtoy waits for maverick...
[07:53] <x_> indus, any ideas on cpu voltage ?
[07:53] <ActionParsnip> Khider: you will use 1 big primary partition
[07:53] <Charbel> ActionParsnip, ok but i still can't open irc chat from firefox
[07:54] <ActionParsnip> Khider: use ext3 or ext4. Ext2 isn't really suitable
[07:54] <indus> x_, no , once you run the sensorsd command, restart system after you answered all questions
[07:54] <indus> x_, then type 'sensors' in terminal and it will list all things
[07:54] <ActionParsnip> Charbel: not sure there dude. Maybe it'll work now after you tested it (worth a try)
[07:54] <x_> ok ty
[07:55] <Appl6> khider: I don't know why people are assuming that "Device is busy" means that you didn't format your hard drive correctly.  To me, that seems very unlikely to be the cause.
[07:55] <Charbel> ok thx for help ActionParsnip
[07:55] <Im0> 10.04.1 installed gnokii 0.6.28 (universe/comm) with "apt-get install gnokii".  Apparently gnokii has a later version and is available in universe: http://gb.archive.ubuntu.com/ubuntu/pool/universe/g/gnokii/ . Shouldn't "apt-get upgrade" upgrade this package to 0.6.29? Using default /etc/apt/source.list.  Not sure why apt-get isn't seeing the 0.6.29 version.
[07:55] <banker247> anyone know how to easily downgrade from php 5.3 to 5.2 without breaking anything
[07:56] <uo3273-fvarklb> thune3: OK.  Are you sure they aren't real viruses?  What is an encrypted ZIP file typical for (i.e. what is it's purpose)?
[07:56] <Appl6> khider: Where is your external hard drive mounted?
[07:56] <khider> ActionParsnip: How do i get read and write permissions once the thing is formatted?
[07:56] <flip_> hey me n my buddy have same problem in ubuntu our alsa isnt loading module or something i have a speaker with 2 lines next to it volume is all the way up and is on speakers aswell
[07:56] <khider> Appl6: /dev/sdg
[07:56] <ActionParsnip> Khider: that's determined when you mount it.
[07:57] <Flannel> Im0: Thats likely in -proposed, the newest version in the repos is 0.6.28 currently
[07:57] <khider> ActionParsnip: Yeah, but when i mount it, it usually gives me permission to read and that is it
[07:57] <ActionParsnip> Khider: usually the gnome automount thing sorts it ok but you may have to manually mount it. Cross that bridge when the time comes
[07:57] <uo3273-fvarklb> thune3: Did you see my reply?
[07:57] <Appl6> khider: Could you pastebin the output of "sudo fdisk -l" and "mount -l" please?
[07:58] <flip_> hey me n my buddy have same problem in ubuntu our alsa isnt loading module or something i have a speaker with 2 lines next to it volume is all the way up and is on speakers aswell..... any one?
[07:58] <flip_> i am on 10
[07:58] <Im0> Flannel: Thanks.  I'm a bit confused about it being in: http://gb.archive.ubuntu.com/ubuntu/pool/universe/g/gnokii/
[07:58] <KB1JWQ> uo3273-fvarklb: Must be a signature mismatch.
[07:59] <ActionParsnip> flip_: if you run: sudo lshw -C sound ,websearch for the product line for guides
[07:59] <uo3273-fvarklb> KB1JWQ: ???  What is that?  And how did you come to this conclusion?
[08:00] <thune3> uo3273-fvarklb: it is just a section that clam knows that it can't read. it is an encrypted collection of stuff. the option is for Clam to warn you, since it can't tell you if it is a problem or not. it is unlikely a problem.
[08:00] <khider> Appl6: http://pastebin.ca/1880969
[08:01] <Flannel> Im0: Ah, actually, it looks like that's the Maverick version.  It may also be in lucid-proposed, I haven't checked yet
[08:01] <Appl6> khider: Did you partition your external hard drive in Ubuntu?  Have you rebooted since you partitioned it?
[08:01] <uo3273-fvarklb> thune3: OK - that is believable.  Why is it unlikely a problem.  How much do you know about library and Encrypted.ZIP files?  Are library files supposed to be encrypted like that?
[08:02] <KB1JWQ> uo3273-fvarklb: They're socket files, they're not encrypted.
[08:02] <Flannel> Im0: Yeah, that's Maverick, not -proposed
[08:02] <KB1JWQ> Er, library files.  Sorry, not socket files.
[08:03] <khider> Appl6: I used Kubuntu
[08:03] <uo3273-fvarklb> KB1JWQ: OK.  And what are socket files?
[08:03] <Appl6> khider: That's fine.  Are you on Kubuntu now, and have you rebooted since you partitioned it?
[08:03] <Alley^Away> whats the file system in ubuntu? ext4?
[08:03] <Im0> Flannel: I'm a bit confused now.  I thought that URL would have been for the current version (ie. 10.4).  Is there an easy way to ask apt to try and install that version?
[08:04] <khider> Appl6: And yeah, I unmounted and remounted the thing and I have zilch permissions except read
[08:04] <Appl6> Alley^Away: You can pick which one you want, but yes, it's usually ext3 or ext4.
[08:04] <Appl6> khider: I'm not talking about unmount or remount.  I'm talking about rebooting your computer.
[08:04] <SandGorgon> has anybody installed a clean Ubuntu system and used LVM ? could anyone point me to a guide
[08:04] <khider> Appl6: No, I am sorry but why should I? I do not understand.
[08:05] <khider> Appl6: But i did not reboot
[08:05] <ActionParsnip> Khider: try: sudo mkdir /media/backup; sudo mount /dev/partition /media/backup -o rw,user ,should be ok
[08:05] <Alley^Away> ok thx - yeah I know that you can pick, I remember upgrading to the latest when I installed... just trying to install stuff under win to be able to see the files, but ran into problems
[08:05] <khider> ActionParsnip: Whoa...cool
[08:05] <ActionParsnip> Khider: replace partition with the partition name. Like sdb1 or whatever
[08:05] <ActionParsnip> !mount | khider
[08:06] <Alley^Away> ext4 would explain it, the tool I'm using only supports ext2/3
[08:06] <Alley^Away> thx
[08:06] <ActionParsnip> khider: mount is very worth learning how to use it
[08:07] <Flannel> Im0: No, that folder has all the versions in the repos for all of the versions of Ubuntu.  As for installing it, offically no.  There's no easy way.  Unofficially, take a look at the dependencies and versions and they may be already satisfied on Lucid
[08:07] <khider> ActionParsnip: Yeah, my Linux kung fu is weak since returning to Ubuntu. Before I used Slackware and Gentoo--but i am too dumb to run the latter on my new puter
[08:07] <thune3> uo3273-fvarklb: you could run "debsums -a openoffice.org-core | grep libpackage" and it should say OK for your file, which means that it matches the installed version of the file. (unless the digest was hacked, very unlikely)
[08:07] <khider> And too lazy to run Slackware
[08:07] <ActionParsnip> Khider: the handbook for gentoo is dead handy for nongentoo stuffs :)
[08:07] <banker247> hey theadmin you still there?
[08:07] <h4f> Hi all, my GSM modem is working fine, however when unplugged without disconnecting can't plug it in straight away (need restart) . does any one what module should I reload or any other manipulation to get it work without restarting , thanks
[08:08] <theadmin> banker247: Sorta
[08:08] <banker247> what do you think of this script?..
[08:08] <banker247> http://ubuntuforums.org/showthread.php?t=1459163
[08:08] <Appl6> ActionParsnip: Looks like you missed the "Disk /dev/sdg doesn't contain a valid partition table" line from fdisk.  You really should read the pastebins instead of giving people wrong advice.
[08:08] <khider> ActionParsnip: No way, I spent days trying to install Gentoo on a 64 g solid state drive and then my terabyte for /home--I gave up. With Ubuntu, I got a  nice GUI to do it all for me during install
[08:08] <uo3273-fvarklb> thune3: OK - so this command will verify if system files are original or not, apparently?
[08:09] <ActionParsnip> Khider: sure but gentoo is much leaner and slicker
[08:09] <Im0> Flannel: That makes sense now, thanks.  I'll try and work out the dependencies as you suggest.  Thanks.
[08:09] <khider> ActionParsnip: I LOVE Gentoo, I just wish I was smart enough to  install it on two discs. Fstab screwed me up
[08:10] <uo3273-fvarklb> thune3: How do you enter the bar symbol?
[08:10] <ActionParsnip> Khider: yeah fstab can be fun
[08:10] <theadmin> banker247: Looks fine, but remove the /etc/apt/sources.list.d/karmic.list file it creates after this... then you'll also have to somehow pin the package so it won't try to upgrade to 5.3 again
[08:10] <mothersofinventi> I'm in some deep trouble trying to use timidity in rosegarden: no sound, what can be wrong?
[08:11] <thune3> uo3273-fvarklb: it checks the package digests of installed packages and tells you if anything changed. "debsums -ac" will check everything that has a digest. (files do get changed when configured, so you will see stuff that is np)
[08:11] <khider> ActionParsnip: I am thinking about installing Slackware if the install GUI is friendly enough for two drives
[08:11] <Smeh> ok.. anyone able to help me out with a really confusing issue? I finally just got the cisco VPN client to compile on 10.04, however for some reason, despite there being a symlink in /usr/local/bin that is pointing to the correct location /opt/cisco-vpnclient/bin/vpnclient
[08:11] <Smeh> typing vpnclient runs nothing?
[08:11] <khider> ActionParsnip: But c'mon--Ubuntu has drives for EVERYTHING
[08:11] <ActionParsnip> Khider: if the backup device has no partitions then use fdisk to make them as the gentoo book says. You should be able to use gparted
[08:11] <Smeh> just reports "/usr/local/bin/vpnclient" so such file or directory
[08:11] <bricky> hi is it possible to install windows XP through wine? lol
[08:12] <thune3> uo3273-fvarklb: bar is shift-\
[08:12] <theadmin> bricky: Not trough WINE, but you can use VirtualBox
[08:12] <ActionParsnip> Khider: you can emerge an equal amount of drivers in gentoo
[08:12] <zcat[1]> bricky:  no but it's possible to install it through virtualbox
[08:12] <banker247> doesn't this sound easier?
[08:12] <banker247> http://dustyreagan.com/downgrade-php-5-3-to-5-2/
[08:12] <bricky> theadmin: ahh ty I will have to use vb
[08:12] <ActionParsnip> Khider: you can emerge an equal amount of drivers in gentoo
[08:12] <Appl6> Smeh: What does "which vpnclient" show?
[08:13] <Smeh> it reports "/usr/local/bin/vpnclient"
[08:13] <Appl6> Smeh: And "file /usr/local/bin/vpnclient"?
[08:13] <khider> khider: Yeah, if you set the dependencies(make sure they are not broken) get the use flags going---and after you do a uDNa World and things go to hell..
[08:13] <khider> but I love it
[08:14] <Smeh> "/usr/local/bin/vpnclient: symbolic link to '/opt/cisco-vpnclient/bin/vpnclient'
[08:14] <Im0> Flannel: Thanks for the suggestion.  I added maverick to source.list and apt-get install... it appears to have installed happily without other dependencies.  Thanks again.
[08:14] <ActionParsnip> Im0: i'd remove the repo now or you'll get a big mess
[08:14] <Appl6> Smeh: And "file /opt/cisco-vpnclient/bin/vpnclient"?
[08:15] <KB1JWQ> uo3273-fvarklb: Google is your friend.
[08:15] <Smeh> "executable, regular file, no read permission
[08:15] <Smeh> i guess that last bit might be a problem?
[08:16] <prince_jammys> sounds like a good guess
[08:16] <Im0> ActionParsnip: Done, thanks.  I first tried "apt-get upgrade package" and it wanted to update everything, so, noticed the potential mess it might have caused. :)  Thanks for the message though.
[08:18] <uo3273-fvarklb> thune3: OK - when I ran "debsums -a openoffice.org-core|grep libpackage", it came back with "/usr/lib/openoffice/basis3.1/program/libpackage2.so - with libpackage highlighted in red.  Does this mean that nothing has changed and the file is original?
[08:18] <Smeh> ok
[08:18] <Smeh> after 777'ing the vpnclient executable
[08:18] <Smeh> i still get nothing typing "vpnclient" but file reports :
[08:19] <Appl6> uo3273-fvarklb: The "highlighted in red" part is from grep; it's telling you what part of the input it matched.
[08:19] <Smeh> ELF 32-bit executableversion 1, dynamically linked (uses shared libs) etc etc..
[08:20] <uo3273-fvarklb> Appl6: OK.  But this result ultimately means then that "libpackage2.so" is the original file, nothing has changed, and it's not a virus?
[08:20] <jacky> Hello
[08:20] <Appl6> uo3273-fvarklb: I'm not familiar with debsums, or the procedure that thune3 was describing.  I was just helping out with the bit I did know.
[08:21] <jacky> I have reinstalled apache2, and now he can't find phpmyadmin anymore in http://localhost/php...
[08:21] <thune3> uo3273-fvarklb: it had a "-" and not "OK" ?
[08:21] <uo3273-fvarklb> thune3: But this result ultimately means then that "libpackage2.so" is the original file, nothing has changed, and it's not a virus?
[08:22] <MilindMK> Hello again
[08:22] <Appl6> Smeh: Can you paste exactly what you get as output from "vpnclient", and then from "/usr/local/bin/vpnclient", and then from "/opt/cisco-vpnclient/bin/vpnclient"?
[08:22] <uo3273-fvarklb> thune3: No.  I was just using the quotation marks to distinguish to you what it actually stated.  The quotation marks were not a part of the result.  And I did get OK stated way off to the right ...
[08:22] <Appl6> Smeh: And paste "echo $PATH" while you're at it.
[08:22] <MilindMK> I am still facing problem with my blue tooth connection
[08:23] <flip_> can some one help me im having major sound issues and i've been told i have a drive module installed its just showing up via vnc would be a big help
[08:24] <thune3> uo3273-fvarklb: it means it is identical to what it was when you installed, so no virus.
[08:24] <MilindMK> When I search for bluetooth device it detect my system but whem I enter PIN it says Unable to Pair
[08:24] <Smeh> Appl6 : sure, 2 sec.. this is a seperate machine to the linux box so might take a moment
[08:24] <MilindMK> and doesn't pops for pin on my system
[08:24] <Appl6> Smeh: Of course, take your time.
[08:25] <Smeh> ok, first "vpnclient" - bash: /usr/local/bin/vpnclient: No such file or directory
[08:25] <Charbel> ActionParsnip, i found what was the problem i didn't restart firefox when i finished installing lol
[08:26] <Smeh> "/usr/local/bin/vpnclient" reports exactly the same
[08:26] <Smeh> and "/opt/cisco-vpnclient/bin/vpnclient" also reports exactly the same thing
[08:27] <uo3273-fvarklb> thune3: that's good news.  And I do see in KlamAV (Events -- Options) where you can select that option to mark encrypted files as suspicious.  I'm running "debsums -ac" now just to make sure ...
[08:27] <uo3273-fvarklb> thune3: thanks so much for all your help.  It's nice to talk to someone who can actually solve my problem and/or put me at ease ...
[08:27] <Smeh> "echo $PATH" - /usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/bin:/usr/games
[08:27] <thune3> uo3273-fvarklb: run it as root (sudo) to avoid random fails
[08:27] <bricky> theadmin: what are you upto
[08:28] <Appl6> Smeh: Even "/opt/cisco-vpnclient/bin/vpnclient" says "bash: /usr/local/bin/vpnclient: No such file or directory" ?
[08:28] <Smeh> yep.
[08:28] <Smeh> if it helps, permissions on the files under the /opt directory
[08:28] <Smeh> are all uhm..
[08:28] <Smeh> ---x--x--x
[08:28] <Appl6> Smeh: Ha.  Can you pastebin the output of "alias", please?
[08:28] <Smeh> but they're there, report a size, etc
[08:29] <thune3> uo3273-fvarklb: also you can use "apt-file search <filepath>" to tell you what package the file belongs to, and then check it with debsums as before.
[08:29] <uo3273-fvarklb> thune3: OK.  So in terminal, I would just enter "sudo klamav" ???  Or what is the specific command, I guess?
[08:29] <thune3> uo3273-fvarklb: i meant run debsums -ac with sudo
[08:30] <thune3> uo3273-fvarklb: run clam as you usually do
[08:30] <Smeh> Appl6: http://www.pastebin.com/NHXjQddS
[08:30] <Appl6> Smeh: And the last thing I might try is to actually copy vpnclient from /opt to /usr/local/bin, not just symlink it.  And see if that helps.
[08:30] <Smeh> ok, i'll give that a whirl while you check that pastebin i guess :)
[08:30] <Appl6> Smeh: Just did, nothing special.
[08:31] <flip_> "riptide firmware not available -2" is the message i get
[08:31] <Smeh> yeah.. just copied the binary to /usr/local/bin
[08:31] <flip_> and riptide is my sound card
[08:31] <Smeh> no difference
[08:31] <flip_> help pls
[08:32] <Smeh> if it helps i'm on 10.04 64 LTS alternate
[08:32] <Appl6> Smeh: That's really, really strange.  Let me think.
[08:32] <Smeh> it does seem a bit strange
[08:33] <khider> Actionparsnip is gone?
[08:33] <Smeh> definitely never come across a similar issue myself in my time fiddling with linux anyway
[08:33] <uo3273-fvarklb> thune3: when it says "debsums: no md5sums for [package name]", what does that mean?  what is md5sum?
[08:34]  * red2kic pours out a whiskey for his homey, ActionParsnip.
[08:34] <red2kic> !md5sum | uo3273-fvarklb
[08:34] <khider> I am trying to get write permissions on my new external drive,but have no luck
[08:34] <Appl6> khider: Have you rebooted yet?
[08:34] <khider> ActionParsnip said to do sudo mkdir /media/backup; sudo mount /dev/sdg /media/backup -o rw,user
[08:35] <red2kic> khider: sudo chown $USER:$USER /the/path/to/new/external/drive
[08:35] <Smeh> Appl6: i've got to scoot, hometime here and there is beer to be bought and such. Thanks for your help. I'll most likely be around on tuesday asking the same questions ;)
[08:35] <red2kic> khider: You might want to do recursively, I suppose. Append -R (ie sudo chown -R ...the rest)
[08:35] <Appl6> Smeh: Ha, OK, good luck with that.
[08:35] <khider> and I got mount: /dev/sdg already mounted or /media/backup busy
[08:36] <Appl6> khider: Please just reboot.  If it doesn't help you can ignore me from then on.
[08:36] <Galerien> no wait
[08:36] <Galerien> khider: try sudo umount -a
[08:36] <Galerien> and then try to mount it again
[08:36] <Eugene89> hey guys,
[08:37] <Eugene89> using crontab -e to add a cronjob, i realised that the job isn't running when i'm pretty sure the script is running properly
[08:37] <thune3> uo3273-fvarklb: it just mean that package wasn't installed with a manifest with digests. debsums can only check packages with digests
[08:37] <Eugene89> i also noticed that crontab -e edits a file under /tmp/cronetcetcetcetc..
[08:37] <khider> Galerien: No dice, tried that.  I will obey Appl6
[08:37] <Eugene89> is there something wrong with the way i'm using crontab?
[08:37] <uo3273-fvarklb> thune3: can you explain "manifest with digests" - in a way I can understand?
[08:38] <Flannel> Eugene89: No, that's correct.  Do you have a carriage return at the end of your file?
[08:38] <Eugene89> what's a carriage return?
[08:38] <uo3273-fvarklb> thune3: I'm just curious - I want to learn this stuff.  So thanks for explaining
[08:38] <Flannel> Eugene89: Is there a blank line at the end of the file?
[08:38] <loxs> I added kubuntu-beta ppa, and now I want to remove it. But it doesn't seem to downgrade back to normal "kubuntu-desktop" packages with sudo apt-get (dist-)upgrade. What do I need to do in order to revert properly?
[08:38] <trollboy> Eugene89, hitting enter on your KB
[08:39] <Eugene89> Fannel: are we talking about the crontab or the script?
[08:39] <Flannel> Eugene89: The crontab file
[08:39] <Eugene89> I typed 5 0 * * * /var/backup/backup.sh >/dev/null 2>&1
[08:40] <Eugene89> under that line is a ~
[08:40] <Eugene89> does that mean there's no carriage return?
[08:40] <Flannel> Eugene89: Right.  You need to add a blank line at the end of that file.
[08:40] <Gryllida> How do I launch ClamAV?
[08:40] <Eugene89> I can't believe it!
[08:40] <Eugene89> That's all it needs?
[08:40] <xsist10> Eugene89:  \n - carraige return (CR) and \r - line feed (LF)
[08:40] <Flannel> Eugene89: Yeah, go to the end and hit return a few times.  crontab needs returns at the ends of the lines to run those lines.  yep
[08:40] <trollboy> Eugene89, the term carriage return refers to the old days of type writers.  The return key, caused the type head carriage to return to the left side of the keyboard and roll the paper to a new line.
[08:41] <Eugene89> OIC
[08:41] <Appl6> xsist10: Other way around.
[08:41] <xsist10> erm complete lie
[08:41] <xsist10> yeah
[08:41] <xsist10> :P
[08:41] <Eugene89> Flannel:let me try that out
[08:41] <uo3273-fvarklb> thune3: what is a "digest"?
[08:41] <xsist10> 8 years of programming and I get that mixed up
[08:41] <Eugene89> is it ok to swear in here?
[08:41] <Appl6> Eugene89: Nope, sorry.
[08:41] <trollboy> Eugene89, I wouldn't
[08:42] <trollboy> although feel free to msg me your profanity ;-)
[08:42] <Eugene89> Appl6, trollboy: Ok thanks. I was just going to swear about being zapped by static from my macbook pro
[08:42] <thune3> uo3273-fvarklb: most packages install a mainifest (.list file) and a digest file (.md5sums) in /var/lib/dpkg/info    You should google md5sum to understand what it does. debsums checks all the packages .md5sums file and compares the installed file to that.
[08:42] <Eugene89> #($%&%
[08:42] <uo3273-fvarklb> And how do I check a file like /usr/lib/libclamav.so.6.05 to make sure it's original?  "debsums", then what?
[08:43] <trollboy> My arschloch toshiba laptop does the same thing to me
[08:43] <uo3273-fvarklb> thune3: And so running .md5sums actually gives you a better idea of whether or not your installed files are in their original state?
[08:43] <Jordan_U> trollboy: No swearing in German either.
[08:44] <thune3> uo3273-fvarklb: apt-file search uo3273-fvarklb   and then debsums -a <that package>
[08:44] <thune3> uo3273-fvarklb: apt-file search /usr/lib/libclamav.so.6.05
[08:44] <trollboy> Curses Jordan_U
[08:45] <Eugene89> oh my. I almost deleted cron.daily
[08:45] <alabd> Good day all ,  after booting ubuntu 10.04 free cd and selecting install choice , ubuntu goes to boot and proceed but it shows a black blank page before complete boot up , what's problem ???
[08:45] <rethus> have kubuntu 10.04 with KDE: 4.4.2. If i hit ALT+F2 and Type in yakuake or something else, it takes a long timeout after "yaku" till the next chars appear on the textfield... and till this, the textfield is freezed.
[08:45] <Eugene89> restoring from recycle bin is all it needs right?
[08:45] <rethus> any idea what the problem?
[08:45] <duanh> what is this?
[08:45] <trollboy> depends how you deleted it Eugene89
[08:45] <Eugene89> i pressed delete
[08:46] <trollboy> then its probably in the bin
[08:46] <Eugene89> yeah i restored it from the bin already
[08:46] <Eugene89> no need for permission stuff right?
[08:46] <uo3273-fvarklb> thune3: Oh I see.  And essentially then, debsums check the current file on the computer, while md5sums checks the system files and compares from the other end (which seems better, actually), right?
[08:46] <mtraker> hi
[08:46] <al_> а из росии товарищей нету??????
[08:47] <trollboy> ooh russian
[08:47] <Jordan_U> !ru | al_
[08:47] <Eugene89> another thing is: I heard that logging in under root all the time isn't safe, how do i do system administering without using a root account?
[08:47] <Flannel> Eugene89: You use sudo
[08:47] <Flannel> !sudo | Eugene89
[08:47] <mtraker> what i need for a config the wacom tavblet? The pen run ok, but the buttons and the ruooler don't run
[08:47] <mtraker> I've got a graphire 4
[08:47] <Eugene89> Flannel: Thanks.
[08:48] <thune3> uo3273-fvarklb: http://en.wikipedia.org/wiki/Md5sum   md5 is a "fingerprint" of a file. debsums checks the fingerprints against the file to see if they match. Both are on your local machine.
[08:48] <rethus> have kubuntu 10.04 with KDE: 4.4.2. If i hit ALT+F2 and Type in yakuake or something else, it takes a long timeout after "yaku" till the next chars appear on the textfield... and till this, the textfield is freezed.
[08:49] <Eugene89> another thing is: I realise that I have to be logged in in order to use VNC to remotely control my linux server. Is there anything I can do about it such that I do not have to be logged in to remotely control my linux server?
[08:49] <ShapeShifter499> hi
[08:49] <SirMoo> Logged into what?
[08:49] <Eugene89> logged into gnome
[08:50] <uo3273-fvarklb> thune3: OK, I see.  So it's like, "debsums" is verifying your computer files, while "md5sum" is verifying the original system files ...
[08:50] <larompa> Hello, how do you install flash player on ubuntu amd 64 ? http://labs.adobe.com/downloads/flashplayer10_64bit.html this link doesn't work no more.
[08:50] <larompa> https://help.ubuntu.com/community/AMD64/FirefoxAndPlugins should be updated.
[08:50] <SirMoo> I'm kind of confused. You... you want to use vnc without being logged in?
[08:50] <Eugene89> yes
[08:50] <Eugene89> i want to log in from vnc
[08:51] <Eugene89> is that like the ultimate breach of security?
[08:51] <wildbat> !restricted | larompa
[08:51] <wildbat> !flash | larompa
[08:51] <SirMoo> Oh. I think I get it...You want to connect from computer a and loginto computer b?
[08:51] <Eugene89> yes
[08:51] <Eugene89> using vnc
[08:51] <Eugene89> but unless i log into computer b already
[08:52] <Eugene89> i am unable to connect to computer b from computer a using vnc
[08:52] <Eugene89> is there any way around it?
[08:52] <thune3> uo3273-fvarklb: when you run md5sum it generates a "fingerprint" of a file. So debsums runs md5sum on all the files to generate their fingerprints, and then checks it against the fingerprint stored in the /var/lib/dpkg/info/<package>.md5sums file. I really can't explain it further.
[08:52] <larompa> Ok thank you
[08:52] <SirMoo> Hm.. I'm actually kind of curious about that now...
[08:53] <Kine> That works fine for me, have you checked the automaticly accept connections?
[08:53] <Eugene89> I googled and stuff, spent quite abit of time on it
[08:53] <SirMoo> Have you tried switching users and see what it did?
[08:53] <Eugene89> i read that it was neccessary to have a user always logged on in the background
[08:54] <SirMoo> Yeah, assuming that you login, then switch users...
[08:54] <wildbat> !vnc | Eugene89
[08:55] <Kine> zoidberg-, woopwoopwoop
[08:56] <mechdave> !FreeNX > mechdave
[08:56] <zoidberg-> Hey guys, got a really wierd issue.  I am running Ubuntu 9.10 fully updated, etc.  I came into work, plugged it into wired network and grab a dhcp lease.. i just can't get out onto the net.  If i use wireless its fine.  I have plugged in another windows computer which grabs a lease and gets out onto the net fine, however this ubuntu laptop won't.  No errors in logs, the link is up, just can't send/recv any data - other people on the same network ca
[08:56] <zoidberg-> Kine: :)
[08:56] <MilindMK> Any help regarding my issue guys?
[08:57] <BlackCow> I have 3 users all in the same group, called friends. I would like two of those users to be able to modify and edit the third users home directory, im not sure how to do this though. I thought adding the users to the shared users group would work, but nothing.
[08:59] <shauno> BlackCow: most likely the permissions on the shared directory.  you'll want it to be owned by the 'friends' group, and group-writable
[08:59] <mechdave> zoidberg-: Have you looked at /etc/resolv.conf?
[08:59] <thune3> zoidberg-: can you ping a known ip address? 8.8.8.8 ?
[08:59] <mechdave> zoidberg-: it should have the nameservers ip addresses in it
[09:00] <indus> mechdave, hi
[09:00] <mechdave> G'day indus
[09:00] <BlackCow> ah, so you treat the entire group as a user then?
[09:01] <shauno> BlackCow, pretty much
[09:01] <uo3273-fvarklb> thune3: No - you've explained it pretty well.  Thanks!
[09:01] <thune3> uo3273-fvarklb: np
[09:02] <BlackCow> shauno: so I tried, "chown -R friends /home/ftpuser/" but it says thats an invalid user
[09:02] <uo3273-fvarklb> thune3: Do you know how to install Contents-i386.gz?  I need it in order to update apt-file, which I had to install ...
[09:02] <Gryllida> Anyone? How do I launch ClamAV?
[09:03] <shauno> BlackCow: try ftpuser:friends rather than just friends
[09:03] <shauno> BlackCow: each file is owned by a user & a group. by default, each user has a group with the same name.  so it'd be ftpuser:ftpuser by default
[09:03] <kurt__> hi. since one of the latest updates, LAN is not detected on several of our machines any more. knetworkmanager says "network management disabled". I have to do a "sudo dhclient eth0" to get it working again. any hints what causes this? It happens on 4 different machines
[09:04] <Propel> hey guys
[09:04] <thune3> uo3273-fvarklb: i've never heard of updating that way. i'm on repos only. sorry.
[09:04] <Propel> I have a simple tv tuner and want to watch and cap tv shows from my cable analog source
[09:04] <mcl0vin> how can i update from 2.6.31-21-generic to 22 please
[09:05] <Propel> you guys recommend mythtv or another program?
[09:05] <uo3273-fvarklb> thune3: OK - what is the difference between repos and distros again?
[09:05] <BlackCow> shauno: make sense, so the command "sudo chown -R ftpuser:friends /home/ftpuser/" executed fine but I still can't copy files into ftpuser's directory
[09:05] <zcfr> I have installed the newest ubuntu but it doesn't have 'update manager' in the administration menu;;  how do I put it there?
[09:06] <Appl6> uo3273-fvarklb: The questions you're asking are answered many millions of times over on Google.  Please.
[09:06] <kurt__> blackcow: you are looking for "setfacl"
[09:06] <bazhang> !repos | uo3273-fvarklb
[09:06] <indus> zcfr, right click on main menu / edit menus and add it
[09:06] <kurt__>        Granting an additional user read access
[09:06] <kurt__>               setfacl -m u:lisa:r file
[09:06] <bazhang> uo3273-fvarklb, distro is short for distribution; eg Ubuntu
[09:06] <mcl0vin> how can i update from 2.6.31-21-generic to 22 please
[09:06] <zcfr> indus, I tried that but there is no option to do that
[09:06] <shauno> BlackCow: group-writable isn't default for a home folder either, so you'll need to change the permissions.  something like chmod +R g+w /the/shared/folder  (where g+w just adds write perms to 'g'roup)
[09:06] <bazhang> Appl6, please don't recommend google here
[09:07] <vega> !repeat | mcl0vin
[09:07] <indus> zcfr, using ubuntu desktop version?
[09:07] <zcfr> indus, yes lts
[09:07] <indus> zcfr, what happens when you right click on the menu icon on panel
[09:07] <uo3273-fvarklb> bazhang: do you know how to install a .gz file that you've downloaded?
[09:08] <bazhang> uo3273-fvarklb, what is the package
[09:08] <zcfr> indus, it opens up
[09:08] <indus> zcfr, edit menus then
[09:08] <BlackCow> shauno: yup, I set g+w and chmod 775, still no go. setfacl isn't currently installed, why do I need it?
[09:08] <zcfr> indus, but there is no option for upgrade manager
[09:08] <bazhang> uo3273-fvarklb, you should always look in the repos (software repositories) first
[09:08] <indus> zcfr, no no , select 'edit menus'
[09:09] <mawst> Anyone using burg?
[09:09] <indus> :)
[09:09] <bazhang> uo3273-fvarklb, also, for some insight into Ubuntu, check the manual
[09:09] <bazhang> !manual | uo3273-fvarklb
[09:09] <zcfr> indus, that is what I am doing
[09:09] <zcfr> indus, but there is no option to add update manager
[09:10] <indus> uo3273-fvarklb, the command tar xzcf 'filename' will untar the file or you can right click the file and say extract here
[09:10] <mcl0vin> vega: would you please help on how i can search that in the forum ...i tried "how to update current kerenel" and return nothing
[09:10] <indus> zcfr, ah yes sorry
[09:10] <indus> zcfr, ok hold on
[09:11] <zcfr> indus, I have even tried doing this sudo apt-get install update-manager-core
[09:11] <rcsheets> when i scp lots of files over to my new VM (running under KVM), the VM's kernel complains of a lot of page allocation failures. so far i have noticed scp itself as well as kblockd mentioned in the messages. after quite a lot of /var/log/messages output, the network seems to stop working entirely. i'm at a loss how to troubleshoot this.
[09:11] <rcsheets> both host and guest are lucid x64
[09:11] <shauno> BlackCow: haven't seen setfacl before, but it sounds very similar to chmod.  going to have to look into that one
[09:11] <zcfr> indus, but I still dont have the option to add upgrade manager
[09:11] <indus> zcfr, in edit menus, go to administration > add new and type update-manager to command entry filed
[09:11] <indus> zcfr, field
[09:11] <indus> i just added
[09:12] <indus> zcfr, understand?
[09:12] <BlackCow> shauno: ah sorry, it was kurt__ who recommended setfacl
[09:12] <indus> zcfr, should work, you will also notice that on typing correct command , the icon als o changes
[09:12] <zcfr> indus, yes
[09:12] <vega> mcl0vin: hmm, upgrade by normal means?
[09:13] <vega> mcl0vin: update manager, etc. you have 10.04 ?
[09:13] <kurt__> shauno, blackcow: setfacl differs from chmod. chmod only knows about the 3 types: user, group and others. setfacl allows complete Acces Control Lists for any number of users or groups
[09:13] <indus> zcfr, success?
[09:14] <BlackCow> shauno, kurt__: ok well I changed the group to friends, chmod 775 and g+w, but it still doesn't work. What else am I missing?
[09:14] <Altreus> Is there a known bug introduced by recent samba updates? Yesterday I was quite happily able to explore the entire Windows network; but I am running in a VM. Windows decreed that I shall reboot, and since I restarted the VM I get DBus timeout errors on most network drives
[09:14] <indus> zcfr, just to make sure there is not a problem with update manager, just typing 'update-manager' in terminal will open it
[09:14] <mcl0vin> vega: 9.10
[09:14] <Gryllida> Hhow do I launch clamav? I installed it in software center, but don't see it in any menus, neither a 'clamav' command in terminal.
[09:14] <Altreus> I have found the issue on google but with no solution.
[09:14] <Altreus> I'm running 10.04
[09:15] <indus> zcfr, hello?
[09:15] <Gryllida> Altreus: try opening an smb://ip/ link
[09:15] <indus> zcfr, anyways i have to go lunch now , good day
[09:15] <zcfr> indus, update manage was not installed I am installing it now
[09:16] <Altreus> Gryllida: I honestly have no idea how to find the IP address
[09:16] <Gryllida> Altreus: get ip of the other machine in start run cmd ipconfig
[09:16] <xsist10> Gryllida: Check System Tools for Virus SCanner
[09:16] <indus> zcfr, hehe there is the problem
[09:16] <indus> zcfr, accidentally got removed probably
[09:16] <Altreus> Gryllida: You just reminded me I do know the IP
[09:16] <megamanx1978> Hi can someone help me find some repo keys I need?
[09:16] <Propel>  I have a simple tv tuner and want to watch and cap tv shows from my cable analog source
[09:16] <zcfr> indus, yes but I have no idea why it would not be installed with a completely new installation of ubuntu
[09:16] <Propel> you guys recommend mythtv or another program?
[09:16] <Altreus> Gryllida: In fact, you reminded me that the other computer is not running Windows at all
[09:17]  * Altreus checks that
[09:17] <indus> Propel, if you just want to watch tv , then i recommend tvtime , its awesomely simple
[09:17] <vega> mcl0vin: the kernel should be upgraded just as any other package, automatically
[09:17] <zcfr> indus, it is working now Thank you very much
[09:17] <indus> Propel, i think vlc can capture tv source , try that one
[09:17] <indus> zcfr, you helped yourself :)
[09:17] <Propel> oh it does? :O
[09:17] <Propel> k
[09:17] <vega> mcl0vin: you don't need any special procedure for that
[09:18] <indus> Propel, yeah :D i believe it can capture all you wish for :
[09:18] <indus> its a brilliant piece of software
[09:18] <Propel> does it do it well?
[09:18] <Propel> we'll see i guess lol
[09:18] <indus> Propel, unfortunately i cant get it to work with my tv tuner but i think ill try again
[09:18] <Propel> i heard mythtv was a good program
[09:19] <Propel> but i coudlnt find it under software centre
[09:19] <Propel> metv and mythubuntu are the closest programs i could find
[09:19] <indus> Propel, try tvtime , for simple viewing of tv
[09:19] <megamanx1978> I need repo keys for this.....
[09:19] <gothenburg> xmbc or something
[09:19] <megamanx1978> deb http://mirrors.dotsrc.org/getdeb/ubuntu lucid-getdeb apps
[09:19] <mcl0vin> vega: i have never done this so i don't know how...where can i start
[09:19] <indus> Propel, mythtv is a monster to setup
[09:19] <megamanx1978> and.....
[09:19] <indus> Propel,try it
[09:19] <Propel> oh i see
[09:20] <Propel> I'd like to cap as well though
[09:20] <megamanx1978> this....
[09:20] <vega> mcl0vin: System -> Administration -> Update Manager (on gnome)
[09:20] <megamanx1978> deb http://mirrors.dotsrc.org/getdeb/ubuntu lucid-getdeb games
[09:20] <Propel> I guess I'll try MeTV
[09:20] <Propel> I think it's less CPU hog than mythtv
[09:20] <mcl0vin> vega: i am using terminal
[09:20] <mcl0vin> vega: just do apt-get update
[09:20] <mcl0vin> *sudo
[09:21] <rtronk1> when i try to /usr/sbin/userdel www-data i get that user www-data is currently logged in
[09:21] <rtronk1> how do i force remove that username?
[09:21] <vega> mcl0vin: sudo apt-get update && sudo apt-get -u distupgrade
[09:21] <mcl0vin> distupgrade will that upgrade to 10.4?
[09:22] <vega> mcl0vin: no it won't
[09:22] <Flannel> mcl0vin: Nope, and it's dist-upgrade not distupgrade
[09:22] <Altreus> Gryllida: smbmount //192.168.1.98/Archive /mnt/p_drive/Archive/  # mount error(113): No route to host
[09:22] <kurt__> rtronk1: www-data is used by apache; you have do uninstall apache
[09:22] <vega> true, typo there
[09:23] <Altreus> Gryllida: Even though I literally just logged in to that server via ssh
[09:23] <vega> mcl0vin: read "man apt-get" if you want to know what it actually does.. not going to explain it here
[09:23] <jackuzzy> hello everyone
[09:23] <Altreus> Also, if I try to browse to it, it asks me for login details before it gives me that dbus error
[09:23] <jackuzzy> can anyone tell me how do y use chmod? to give an dir access to another user?
[09:23] <mcl0vin> vega: will do..thank you anyways for the help and explanation
[09:24] <Altreus> hmm!
[09:24] <Altreus> I have to do more investigation
[09:25] <xsist10> jackuzzy: Hey. Here is a quick tutorial explaing file permissions and why you'd use chmod - http://www.dartmouth.edu/~rc/help/faq/permissions.html
[09:25] <Administrator__> how do I set up a dial up connection on Ubuntu 10.4
[09:25] <megamanx1978> Anyone have any getdeb mirrors?
[09:25] <joaopinto> megamanx1978, getdeb is down
[09:27] <vega> Administrator__: if you have not done so already, start here: https://help.ubuntu.com/10.04/internet/C/modem.html
[09:29] <megamanx1978> I know getdeb is down but I found two getdeb mirrors that are recommended to use from dot src on google until getdeb is back up but I cant find the key for them
[09:31] <kaflowski> could anyone tell me how to enable thumbnails on video file icons in samba?
[09:31] <megamanx1978> I found them on google by searching what happened to getdeb
[09:33] <yohannbzh> Hi. How is it possible to cleanly remove a program that i installed with a make install?
[09:33] <Guest99601> vega: i clicked the link and now all my internets wont work
[09:34] <yohannbzh> (it is GEOS)
[09:34] <Kartagis> yohannbzh, make clean and make distclean
[09:34] <gothenburg> :D
[09:34] <gothenburg> distclean? autoclean then?
[09:35] <kurt__> yohannbzh: its "make distclean" or "make autoclean"
[09:35] <rcsheets> distclean doesn't uninstall anything
[09:35] <rcsheets> it's meant to let you build from scratch
[09:36] <rcsheets> some packages have a 'make uninstall' or similar, to undo whatever 'make install' did, but not all do. i'm not familiar with GEOS specifically.
[09:36] <vega> depends on the Makefile in question, it might not be possible at all (automatically)
[09:36] <vega> read the instructions (README or something) and Makefile
[09:37] <yohannbzh> Kartagis: make clean is not only to remove the compiled files in source path?
[09:37] <kurt__> yohannbzh: you might be able to change the installation directory from "/" to something else. Install there and you know the names of all files that have been installed.
[09:38] <yohannbzh> kurt__: Ok, i'll do that
[09:38] <yohannbzh> kurt__: thanks
[09:38] <Kartagis> yohannbzh, I said make clean *and* make distclean
[09:38] <rtronk1> what is the proper way to create a user on ubuntu?
[09:38] <vega> be aware that installing a package like that *will* overwrite any files from a standard ubuntu package
[09:39] <kurt__> kartagis: yohannbzh is right, make clean and make distclean only cleanup the build directory
[09:39] <saimon> hi all...I've just had my ubuntu vm fail fsck on reboot, did a manual fsck (just accepted everything) but after reboot it's stuck in the init process before getting to single user mode. It's complaining about /etc/rcS.d/S70screen-cleanup missing /bin/csh. Obviously during the fsck this file was modified but I've no idea how I can now edit it since I get enter single user mode...
[09:39] <pretender> Desktop Webmail in 10.04 can it handle attachments.  e.g. click on a file send by email.  I know it can handle send to link etc
[09:41] <Kartagis> rtronk, sudo useradd [-m] <user>. -m is for if you want to create the home directory too
[09:41] <Flannel> Kartagis, rtronk1: use adduser instead
[09:42] <Kartagis> Flannel, what's the difference?
[09:42] <saimon> I've not been able to find any info on google so I was hoping someone here could help me out...
[09:42] <Flannel> Kartagis: It's higher level, so it's a bit more sane to use for default values, etc.
[09:43] <vega> be aware that none of the command line tools automatically adds the user to necessary groups for accessing devices (video, sound, ..) etc.
[09:43] <vega> ie. those groups the ubuntu installer puts the default user into
[09:43] <vega> you need to specify those by hand
[09:43] <Flannel> and I suggest using adduser to do that too.  `adduser user group`
[09:45] <gothenburg> is there any "tree" command in ubuntu like in windows?
[09:47] <saimon> I'm guessing I'm pretty much up the creek and will probably require a reinstall? :(
[09:47] <Pax-Man> Hi, I'm running Ubuntu 10.04 64bit edition and with great satisfaction - Even though I get some errors. When I run flash apps it doesn't seem to capture my mouseclicks :(
[09:47] <rww> gothenburg: I think the "tree" package has an equivalent.
[09:48] <Kartagis> gothenburg, remind me what tree does?
[09:48] <rww> I'm not sure of this, since I can't remember how tree on Windows works, but the descriptions on Google sound the same :\
[09:48] <rcsheets> Pax-Man: i have that problem too. this is not a solution, but as a workaround i have found that Chrome doesn't have that issue.
[09:48] <gothenburg> Kartagis: make a tree of everything in the folder and subfolders
[09:48] <rww> !info tree
[09:49] <rww> yup.
[09:49] <Pax-Man> rshakin, Thank you! Well, I'm sad to leave Firefox - But I think it's better than going to Windows ;-)
[09:51] <indus> Propel, i couldnt get metv to work, its very slow in development i think
[09:51] <Propel> good to know
[09:51] <indus> Propel, its a foss baby
[09:52] <Propel> it was the first program that popped up when i searched for mythtv
[09:52] <Propel> foss?
[09:52] <indus> Propel, i mean open source project
[09:52] <HowdyDoody> In middle of upgrade to 0.04 my keyboard stopped keying.    After a bunch of key banging the Ctrl-Alt-Del key starts to work suddenly.  BAH now I've rebooted and it seems to be hung at ubuntu with the 5 dots.   How to recover ?    ---> I tried:  trl-alt-F1 login and sudo do-release-upgrade......    I got: checking for new ubuntu release  .....    no release found   > What can I try next  to get the upgrade back on track ?
[09:52] <Propel> i see
[09:52] <indus> Propel, mythbuntu is a full os
[09:52] <Propel> oh shit
[09:52] <Propel> lol
[09:52] <indus> Propel, for mythtv you need to setup mysql etc
[09:52] <Propel> argh :/
[09:53] <Propel> I thought it was simple setup :/
[09:53] <indus> Propel,only vlc or tvtime are easy
[09:53] <Propel> but tvtime doesn't record, right?
[09:53] <indus> Propel, try vlc i suggest , it probably has cap too i heard
[09:53] <Propel> yeah, i remember someone telling me that now. but i'd like to see other alternatives
[09:53] <Propel> in case they're better than vlc
[09:54] <indus> Propel, mythtv is best for you i guess, first install mysql server, then have to start it from a terminal, then configure mythtv backend etc
[09:55] <Propel> lol i'm such a n00bie, i'll need a good guide
[09:56] <antoine__> hello, i've got a question. Is that possible to upgrade from 9.10 to 10.04 by using the 10.04 LTS CD ??
[09:56] <WXZ> is there a simple way to compile a source code, because I can't find one
[09:57] <rww> antoine__: only if it's an alternate CD. doesn't work with the desktop CD
[09:57] <antoine__> It is the desktop CD :/
[09:58] <troshki> hi all
[09:58] <antoine__> Hi
[09:58] <troshki> sorry, but can i ask for help not about ubuntu
[09:58] <troshki> &
[09:58] <troshki> ?
[09:58] <kiamo> should the windows NT/2000/XP boot option in grub2 work for windows 7 too?
[09:58] <Galerien> troshki: ask, and w'll see
[09:58] <troshki> i need somebody to vote for my photos
[09:59] <rww> troshki: no.
[09:59] <troshki> thanks. bye
[09:59] <iceman_3233> weirdo
[09:59] <troshki> quit
[09:59] <troshki> exit
[09:59] <Galerien> kiamo: grub2 works for win*
[09:59] <rww> troshki: /quit
[09:59] <Galerien> iceman_3233: +1
[09:59] <troshki> =) thanks
[10:00] <kiamo> Galerien, hmm... I get a cannot find device error :(
[10:00] <Galerien> kiamo: ow... well, I never had any error for any windows I used (from 2000 to 7)
[10:01] <kiamo> hmm
[10:01] <alazyworkaholic> I have a 10.04 install & an AMD Athlon X2 4850e processor. I'll soon replace it with a Phenom II. Do I have to do anything with ubuntu before/after the swap?
[10:02] <iceman_3233> Galerien: Question?
[10:02] <oCean_> !afk > Farkie
[10:02] <lallenlowe> alazyworkaholic: theoretically no
[10:02] <lallenlowe> alazyworkaholic: should work fine
[10:02] <Galerien> iceman_3233: no, I was just agreeing with the fact that troshki was a weirdo :D
[10:02] <Farkie> oCean_ -> BNC
[10:02] <lallenlowe> alazyworkaholic: will you be using the same mobo?
[10:02] <gothenburg> :)
[10:02] <iceman_3233> no not that
[10:03] <alazyworkaholic> lallenlowe: thanks, yeah, same mobo. It's an AM2+ socket, so the AM3 Phenom II 945 should work with it right?
[10:03] <iceman_3233> are you familiar with Backtrack?
[10:03] <Galerien> iceman_3233: I used it once or twice
[10:03] <lallenlowe> alazyworkaholic: don't have the cpu's memorized
[10:03] <iceman_3233> Okay.
[10:03] <Galerien> iceman_3233: ask and will see
[10:03] <kaie> hi. I'm using ubuntu 10.04 alternate install. I need to ensure the installer will *not* touch the MBR or boot loader. The installer is already installing files to disk. It has *not* yet asked me what bootloader I want. Will it ask me later?
[10:03] <iceman_3233> I don't care for KDE that much
[10:03] <lallenlowe> alazyworkaholic: GNU/Linux is great at dynamically etecting new hardware though
[10:04] <kraut> moin
[10:04] <iceman_3233> Is there a way to port tools into Gnome?
[10:04] <xylander> #ubuntu.pl
[10:04] <iceman_3233> I think I read someone doing that? Any clues.
[10:04] <lallenlowe> xylander: /j #ubuntu.pl
[10:04] <iceman_3233> forgot
[10:04] <oCean_> Farkie: don't use noisy /away messages or nick changes; repeated use of either of them may result in a ban
[10:05] <alazyworkaholic> lallenlowe: 3 GHz 4-core. It has a 95 watt TDP, whereas the old one was 45 watts, so I guess there's probably no way the old Athlon's stock cooler would manage eh?
[10:05] <iceman_3233> I would be nice to run it in Gnome though.
[10:05] <Galerien> iceman_3233: hum...
[10:05] <Galerien> iceman_3233: try "sudo tasktel"
[10:05] <kingqueen> skdhaksda
[10:06] <Galerien> iceman_3233: sudo tasksel
[10:06] <lallenlowe> alazyworkaholic: it might, I dunno
[10:06] <iceman_3233> okay
[10:06] <minh_> hello
[10:06] <iceman_3233> I
[10:06] <minh_> i want also
[10:06] <iceman_3233> have run Vista and Ubuntu dual boot.
[10:06] <ShapeShifter499> how do I make sure my system has the most up-to-date drivers ?
[10:07] <iceman_3233> Now I just run Vista with Backtrack dual boot.
[10:07] <tgywa> Hello ...
[10:07] <kingqueen> Chao Cac Ban
[10:07] <iceman_3233> but thanks I will give sudo tasktel a try.
[10:07] <Gryllida> Hhow do I launch clamav? I installed it in software center, but don't see it in any menus, neither a 'clamav' command in terminal. IDK where System Tools are.
[10:08] <kaflowski> Gryllida: have you tried KlamAV?
[10:08] <Galerien> iceman_3233: I don't know if its just ubuntu, but it's a really great tool for installing big packs of software (lamp, kde, gnome....)
[10:08] <anthony> hi guys
[10:08] <iceman_3233> I'll give it a try.
[10:08] <anthony> guys how do you install LAMPP pls help me
[10:09] <iceman_3233> I'm so much of a gnome fan.
[10:09] <Gryllida> kaflowski: no, why?
[10:09] <tgywa> What could be the cause of a network error "SIOCADDRT file exists .... Failed to bring up eth1!
[10:09] <Galerien> iceman_3233: I was, but now i'm using KDE with gnome shortcut
[10:09] <kaflowski> Gryllida: that is a GUI for clamav
[10:09] <Gryllida> !clamav
[10:09] <Galerien> anthony: sudo tasksel
[10:09] <iceman_3233> cool
[10:09] <Gryllida> !klamav
[10:09] <anthony> ok
[10:09] <Gryllida> um
[10:09] <anthony> thx
[10:09] <Gryllida> kaflowski: anyway, ok, thanks
[10:09] <Gryllida> !antivirus
[10:09] <FloodBot4> Gryllida: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[10:09] <tgywa> What could be the cause of a network error "SIOCADDRT file exists .... Failed to bring up eth1!" ?
[10:10] <rww> Gryllida: command-line program called "clamscan", it seems.
[10:10] <Gryllida> rww: ok
[10:10] <rww> Gryllida: see http://packages.ubuntu.com/lucid/i386/clamav/filelist
[10:10] <Gryllida> ok
[10:10] <rww> Gryllida: I'm not familiar enough to know of GUI frontends.
[10:10] <Gryllida> rww: ok thank you.
[10:14] <kaie> will the ubuntu alternate installer prompt me to confirm, prior to writing the bootloader?
[10:14] <gottto> tgywa: does eth1 exist?
[10:14] <airtonix> wtb screenshots of new crytek online game
[10:14] <airtonix> woops wrong channel
[10:14] <airtonix> T_T
[10:15] <Gryllida> kaflowski: LOL, KlamAV is not gui for clamav, it is a different AV (for KDE)
[10:15] <rww> U_U
[10:15]  * airtonix hides
[10:15] <kaflowski> Gryllida: Wrong.
[10:15] <tgywa> gottto, yes .. eth1 exists
[10:15] <tgywa> gottto, ifconfig -a shows that
[10:15] <gothenburg> "Om folket inte har bröd, kan de ju äta kakor." Marie Antoinette
[10:15] <gothenburg> wrong channel
[10:15] <Gryllida> kaflowski: I looked it up in the center, it says nothing about clamav
[10:16] <kaflowski> Gryllida: It uses the clam daemon
[10:16] <gottto> tgywa: and what are you doing that produces the error that eth1 couldn't be brought up?
[10:16] <term_oldcomp1> ? need a quick fix.  nvidia drivers for xserver... refuses to recognize my monitor correctly (21" widescreen lcd) and only allows 640x480. how to quick fix?
[10:17] <tgywa> gottto, added some lines of configurations with in interfaces file ... then it stops
[10:17] <angelete2> hi
[10:17] <angelete2> i've just installed ubuntu server 10.4
[10:17] <gottto> tgywa: what lines did you add and why pls?
[10:17] <angelete2> and now i want to install xen
[10:17] <kaie> whoops, bug 337957 suggests I should cancel my install...
[10:18] <angelete2> but if i try aptitude install ubuntu-xen-server i get an errror
[10:18] <speiros> I have Ubuntu 10.4, and I can't add a wireless network.  Do I download WINE, and which version do I download if so?  The files won't open up on the cd for me.
[10:18] <gottto> !wine
[10:18] <tgywa> gottto, I wanted to have internet connection and changed the following lines
[10:19] <xsist10> speiros: Does the network manager not pick up the wireless network you want to connect to?
[10:19] <speiros> Thanks ubottu
[10:19] <speiros> xsist10: I haven't put it in yet, as the instructions recommended putting the disk in first.
[10:19] <tgywa> gottto, auto eth1
[10:19] <kaflowski> Gryllida: it lists klamav as a GUI for clamav on clamav's wikipedia page, check it out if you don't believe me.
[10:19] <speiros> xsist10: I should try I guess eh?
[10:20] <tgywa> iface eth1 inet static
[10:20] <tgywa> address x.x.x.x
[10:20] <xsist10> speiros: ok. you probably have a CD with software for windows. You'll want to avoid that.
[10:20] <speiros> lol, true.
[10:20] <tgywa> netmask 255.255.255.192
[10:20] <xsist10> speiros: Are you near the wireless network now
[10:20] <speiros> Yeah
[10:20] <tgywa> network x.x.x.x.0
[10:20] <tgywa> broadcast x.x.x.63
[10:21] <tgywa> gateway x.x.x.1
[10:21] <tgywa> that is it
[10:21] <speiros> I just plugged it in.  I'll see what it does.
[10:21] <tgywa> and then stoped to work
[10:21] <xsist10> speiros: ok, in the top left hand corner of your screen (I'm assuming you're using Ubuntu and not Kubuntu) you'll see a little signal icon.. looks like the signal from an antenna
[10:21] <Gryllida> kaflowski: thank you very much.
[10:21] <kaflowski> Gryllida: np
[10:21] <xsist10> speiros: Left click on that icon and a list of visible nearby wireless networks should be listed (if your wireless card is enabled)
[10:22] <speiros> I have network manager, but the icon disappeared.  I am using something else instead.  Network connections.
[10:23] <gottto> tgywa: make netmask end in .0 and broadcast end in .255
[10:23] <gothenburg> Screensaver like this in ubuntu? http://www.sweclockers.com/image/gallery/2010/06/05/2-1.jpg?t=gallery&k=e437f8c5
[10:24] <xsist10> speiros: lets take this to pm
[10:24] <tgywa> gottto, yes ... have done that
[10:25] <gottto> tgywa: and restarted the network?
[10:26] <Propel> thx for the suggestions indus
[10:26] <Propel> i will get to them later
[10:26] <indus> Propel, kk
[10:26] <tgywa> gottto, restarted the network and then the PC
[10:26] <Snadder> Hi. How can I bypass the root password wich comes up when a hardisk fails to fsck at bootup?
[10:27] <Snadder> which*
[10:28] <Snadder> Isn't there some way of booting directly into a shell?
[10:28] <Snadder> like.. init=/bin/bash or something
[10:28] <red2kic> gothenburg: We do have http://electricsheep.org/
[10:28] <gottto> tgywa: stopped the network manager?
[10:30] <tgywa> gottto, how can i do that ... ?
[10:31] <RockyRoad> Hello there,
[10:31] <RockyRoad> Could somebody help me with system language configuration in 10.04 ?
[10:31] <Sandking> hi
[10:31] <RockyRoad> hi Sandking
[10:31] <Sandking> aside from aesthethic and ideological stuff is there any reason that Ubuntu is better than Mint?
[10:32] <RockyRoad> I described the problem in pastebin, along with a sample terminal session.
[10:32] <Sandking> I'm using Mint now but I just wanted to know
[10:32] <Snadder> I tried to boot into single user mode.. with appending 1 to my grub line.. but I still get a password promt.
[10:32] <RockyRoad> http://ubuntu.pastebin.com/3JmdWgYg
[10:32] <gottto> tgywa: sudo service NetworkManager restart.
[10:33] <gottto> tgywa: sudo service NetworkManager stop
[10:33] <oCean_> Sandking: this is not the channel for such discussion. It's up to you to choose, depending on your preferences, features you require, and other factors
[10:33] <willwork4foo> Hi! I'm not sure what's going on with my wifi connection - I can see the wireless network (it's a WPA2 network) and I can request to join it, but after I put the wifi password in, it doesn't connect
[10:34] <willwork4foo> I just get a progress indicator spinning for a while, then it fails to connect.
[10:34] <willwork4foo> Any ideas?
[10:35] <tgywa> gottto, sayes unrecogenized service ... should I install a package or ....?
[10:35] <Sandking> oCean_: why it's not such channel? you all are Ubuntu users and some propably have experience with Mint. I just wanted to know general opinion
[10:35] <oCean_> Sandking: this channel is for technical support only. You are most welcome to join #ubuntu-offtopic though
[10:35] <Sandking> oCean_: oh, ok, thanks
[10:36] <i-dont-know-noth> hello, i am installing ubuntu as a win app and i wonder why this takes about one hour already without any evidence of an actual ongoing process. Any help possible?
[10:37] <red2kic> i-dont-know-noth: I remember playing around with Wubi a little. It's probably downloading ISO -- 700MB.  You have fast connection?
[10:37] <i-dont-know-noth> sorry, i forgot to say that i install from a CD
[10:38] <gottto> tgywa: linux is case sensitive
[10:38] <tgywa> ok ...
[10:39] <HowdyDoody> In middle of upgrade to 0.04 my keyboard stopped keying.    After a bunch of key banging the Ctrl-Alt-Del key starts to work suddenly.  BAH now I've rebooted and it seems to be hung at ubuntu with the 5 dots.   How to recover ?    ---> I tried:  trl-alt-F1 login and sudo do-release-upgrade......    I got: checking for new ubuntu release  .....    no release found   > What can I try next  to get the upgrade back on track ?
[10:39] <Hotwired> hello people, how can i find out what options my kernel was built with (its a stock karmic one)
[10:39] <nhak> how can i open many terminals when i connect to a host through ssh?
[10:39] <Hotwired> nhak: screen
[10:39] <Vroomfondle> nhak: GNU Screen
[10:39] <Vroomfondle> !screen
[10:39] <nhak> yeah maybe have to install it ... thanks all
[10:39] <wikiik> from a directory how can i list all the files that are inside the it and it's folder?
[10:40] <Hotwired> ls
[10:40] <red2kic> i-dont-know-noth: Well -- What do you see on the monitor?
[10:40] <red2kic> i-dont-know-noth: Keep it here. No private messages. Thanks. :)
[10:40] <i-dont-know-noth> ok, just thought that nonone is free to answer
[10:40] <foxmulder881> Hey, just reinstalled Lucid. When I dist-upgraded via tty1, I noticed a few messages during the upgrade process something about "unattended upgrades...". Anyone know what that is all about, or is this normal?
[10:40] <wikiik> i would like that the output is one line for each file and that it shows me the path from where i do the command
[10:41] <i-dont-know-noth> i see the installation process box that is actually "frozen" since about one hour
[10:41] <Gryllida> i-dont-know-noth: installation of what?
[10:41] <thune3> RockyRoad: if you remove the 'secondary' languages in language selector, would that help?
[10:42] <i-dont-know-noth> i install ubuntu as a WIN App, Ubuntu-10,04 Rev 189
[10:42] <Gryllida> i-dont-know-noth: try to start the installation anew, it taking one hour isn't ok
[10:42] <foxmulder881> Anyone?
[10:43] <Gryllida> yes?
[10:43] <RockyRoad> Thanks for answering thune3, I'll try ...
[10:43] <i-dont-know-noth> i did 2 times today already
[10:43] <Gryllida> i-dont-know-noth: your specs?
[10:43] <tgywa> gotto, is that utility builitin or should I install ... can't use network manager ... though I tried to be careful about the spelling
[10:43] <i-dont-know-noth> the upper proceed bar is about 40% the lower one on 100%
[10:44] <Gryllida> i-dont-know-noth: I mean your machine model, or what message does it say when it's frozen (like 'installing the so-and-so thing or something)
[10:45] <Gryllida> i-dont-know-noth: what is the process that has just finished so that the lower one is 100% ?
[10:46] <RockyRoad> thune3: I put English as first  in the list, launched a new terminal and tried "df -h" ... still in  French
[10:46] <tgywa> gottto, am installing gnom-network-admin
[10:46] <i-dont-know-noth> my machine - what do you want to know about it?
[10:46] <i-dont-know-noth>  Intel 2 Core 6400 @ 2,13 GHz, 3,25 GB RAM, WIN XP ver 2002 SP3
[10:47] <rcsheets> is it possible to install a debian kernel into ubuntu?
[10:47] <Gryllida> i-dont-know-noth: manufacturer, model; and the second question of mine is interesting too
[10:47] <Gryllida> rcsheets: it already is debian based afaik
[10:47] <Sia-> i'm looking for LTS DVD, is available in ubuntu.com?
[10:47] <Sia-> ican't see it!!
[10:47] <Gryllida> hmm
[10:47] <red2kic> i-dont-know-noth: Are you using Wubi though? I don't understand when you said I'm using it as WIN APP?
[10:47] <rcsheets> Gryllida: yes but i mean one actually distributed directly by debian
[10:47] <speiros> xsist10: I'm back.  I didnt' see the icon for the network manager even still.
[10:48] <geohacker> having trouble in booting up a ubuntu lucid system coupled with windows 7. it shows "no module name found, press exit to abort". what could be wrong? How do I fix grub?
[10:48] <saykou> hello people, any one knows how to solve the iceauthority problem on the startup
[10:48] <red2kic> Sia-: http://cdimage.ubuntu.com/releases/lucid/release/
[10:48] <i-dont-know-noth> red2kic: there is no " manufacturer, model". i did the PC myself
[10:49] <i-dont-know-noth> is it possible to stop displaying the server messages here in this cha?? Quite disturbing
[10:49] <Gryllida> Sia-: http://cdimage.ubuntu.com/releases/10.04/release/
[10:49] <red2kic> i-dont-know-noth: Why the XP specs? You said you burned the ISO and did the direct installation from the disc or you're using some kind of virtual apps?
[10:50] <geohacker> some help?
[10:50] <Fudge> i-dont-know-noth  for example?
[10:50] <red2kic> i-dont-know-noth: It's not server messages. One of the ops are cleaning the banlist.
[10:50] <rapha> hi all!
[10:50] <rapha> is there any gui for seeing what usb devices i have installed?
[10:50] <rapha> lsusb -v is so cluttered...
[10:50] <red2kic> rapha: "sudo fdisk -l"
[10:51] <geohacker> how do I fix the grub.
[10:51] <geohacker> ?
[10:51] <red2kic> !fixgrub | geohacker
[10:51] <speiros> I am having problems with obm storage.  I don't know what it is, nor what it is doing, but it isn't completely installed, and I don't know how to remove it.
[10:51] <i-dont-know-noth> red2kic: i really dont know what are you asking about. you ask for the model, i told you what kind of PC i use.
[10:51] <SSSeSSS> any 1 from seattle area?
[10:52] <red2kic> i-dont-know-noth: How are you installing it? From the ISO you download and burned to the disc?
[10:52] <thune3> RockyRoad: there appear to be other env variables that affect xterm. look at output of "env" and see if anything is set to french
[10:52] <oCean_> SSSeSSS: this is only ubuntu support channel, not chat
[10:52] <Gryllida> !ot | SSSeSSS
[10:52] <Gryllida> :)
[10:52] <Glowball> Has somebody tried Flash 10.1 32 bit on 64 bit yet? (There isn't a native 64 bit version afaik (if there is, please tell me), and 10.0 32 bit was highly unstable)
[10:52] <i-dont-know-noth> red2kic: from a CD i burned from the ISO i dld yesterday
[10:52] <SSSeSSS> ok i get sorry
[10:52] <SSSeSSS> i mean i get it
[10:52] <Duskin> does 10.04 for powerpc work?
[10:53] <speiros> lol Welcome anyway SSSeSSS.  hope your ubuntu is as enjoyable as mine :)
[10:53] <red2kic> i-dont-know-noth: Did you ran md5sum on the ISO? Sometimes the download get corrupted.
[10:53] <red2kic> !md5sum | i-dont-know-noth
[10:53] <oCean_> !ppc | Duskin
[10:53] <red2kic> i-dont-know-noth: You should try Alternative ISO.
[10:54] <red2kic> !alternative | i-dont-know-noth
[10:54] <i-dont-know-noth> waaaa
[10:54] <Chickenery> Hello, I am setting up a computer in school, can I set so the user can't change his own password?
[10:54] <rcsheets> well i guess i'll try it. worst case, it'll break.
[10:55] <Gryllida> Chickenery: sorry, impossible afaik
[10:55] <i-dont-know-noth>  /clear does clear all the screen...
[10:55] <i-dont-know-noth> this is not what i expected....
[10:55] <red2kic> i-dont-know-noth: Read this too. https://wiki.ubuntu.com/LucidLynx/ReleaseNotes (See if something is familiar with your machine).
[10:55] <tgywa> gottto, the problem is I can't make the install as I don't have interent connection ... means can't use the network manager at this moment.
[10:55] <icedwater> Hello! I'm using Karmic x64. I have had strange behaviour with compiz recently, it just takes up a lot of memory and slows everything down. compiz.real sits at the top of top and I have to placate my fan with metacity --replace at login.
[10:55] <rcsheets> Chickenery: you could deny them the ability to execute /usr/bin/passwd
[10:55] <icedwater> Does anyone have a similar problem?
[10:55] <icedwater> rcsheets: Was thinking of something similar.
[10:55] <i-dont-know-noth> ok, i guess, i am not made for this kind of conversation....
[10:56] <Chickenery> rcsheets: and what about the gnome gui thing? Will it also disable it?
[10:56] <icedwater> i-dont-know-noth: What seems to be the problem?
[10:56] <rcsheets> unsure. try it and see, i suppose.
[10:56] <i-dont-know-noth> thank you either, all
[10:56] <Chickenery> and gconf-edit?
[10:57] <Chickenery> Will simple disable of execution disallow them to change the properties?
[10:57] <rcsheets> you can change your password using gconf-edit?
[10:57] <nipas> hello..how can i replace compiz compositing manager with metisse and set it as default?
[10:58] <Chickenery> no, but you can change other things, it would allow them to use hibernation, etc...
[10:58] <rapha> red2kic: wtf?! i ask for a USB DEVICES *GUI* and you suggest *fdisk*?!?
[10:58] <nipas> i have 10.04
[10:58] <Gryllida> !info metisse
[10:58] <Gryllida> hmm
[10:58] <Gryllida> idk
[10:58] <red2kic> rapha: Oh lord. GUI. GUI. GUI. Hmm. gparted!
[10:58] <icedwater> nipas: You mean metacity?
[10:59] <red2kic> rapha: It is a Gnome Partition Editor but it should list all devices.
[10:59] <nipas> no
[10:59] <nipas> iits metisse
[10:59] <sharat87> hello, my python's MySQLdb module broke when I upgraded from karmic to lucid.. it says ImportError: libmysqlclient_r.so.15: cannot open shared object file: No such file or directory
[10:59] <icedwater> Hmm, never heard of it. Shall look it up.
[10:59] <nipas> I just want another equal cm for ubuntu
[10:59] <nipas> cause compiz causes problems
[11:00] <icedwater> Hmm... doesn't Metacity have fairly good compositing too?
[11:00] <nipas> I want 3d aceleration
[11:00] <nipas> acceleration*
[11:00] <sharat87> I tried getting help on that at #python.. and was suggested to ask it here.. so.. any idea how I can fix my MySQLdb python package?
[11:01] <nipas> any ideas?
[11:01] <crdlb> nipas: many of the "problems" caused by compiz are inevitable with a compositing manager
[11:01] <Balgan> sharat87, show the errors ur getting
[11:01] <nipas> so what do you suggest as an alternative?
[11:02] <sharat87> when I try `import MySQLdb`, I get ImportError: libmysqlclient_r.so.15: cannot open shared object file: No such file or directory... will paste-bin the traceback..
[11:02] <crdlb> nipas: it's possible that metacity's builtin compositing manager might work better for you, purely because it doesn't use OpenGL
[11:02] <crdlb> nipas: in any case, problems with 3d acceleration and compiz are the fault of your video driver
[11:03] <Balgan> sharat87, You appear to be missing the libmysqlclient15off package or a file in it.
[11:03] <Balgan> Try to reinstall it.
[11:03] <nipas> i don't ythink so...
[11:03] <nipas> for example flash , cursor change etc
[11:03] <sharat87> Balgan: ok.. will try now
[11:04] <icedwater> crdlb: Maybe I should check on my video driver too.. I'm using nvidia 195.30 beta and compiz is turning up the heat every time I log in (at least since I installed the 2.6.31-22 kernel via apt-get upgrade... removed it but the problem remains)
[11:04] <maxo> I'm totally confused. I've just set up ubuntu server and I can fetch packages with apt fine. But when I connect to a website using elinks, the proxy server on my network blocks it. So how is apt getting through??
[11:04] <zvacet> nipas: some info about metisse http://ubuntuforums.org/showthread.php?p=9397429
[11:04] <sharat87> Balgan: it says.. http://paste.pocoo.org/show/224221/
[11:04] <nipas> thx :)
[11:05] <Glowball> Has somebody tried Flash 10.1 32 bit on 64 bit yet? (There isn't a native 64 bit version afaik (if there is, please tell me), and 10.0 32 bit was highly unstable)
[11:05] <icedwater> crdlb: What makes you so sure the problem is with a video driver, though?
[11:06] <ikonia> test
[11:06] <Gryllida> ikonia: succeeded
[11:06] <ikonia> thank youi
[11:07] <elioth> quit
[11:07] <crdlb> icedwater: because compiz isn't doing anything wrong in that respect, but it takes quite a bit of work in the video drivers for redirected direct rendering to work well
[11:08] <nipas> mutter is an alternative ...kwin is for kde...so what can i do?
[11:08] <nipas> IS THERE ANOTHER?
[11:08] <nipas> sry
[11:08] <nipas> it was by fault:D
[11:09] <crdlb> nipas: with the exception of cursor themes (which is indeed a compiz limitation), everything else should work about the same with any 3d compositing manager
[11:09] <icedwater> crdlb: OK... so compiz is just doing its regular job, but the video driver is working the CPU extra hard is what you're saying?
[11:10] <fanti> hello, since a few days ago my ubuntu doesn't bring up interface eth0 at startup automatically. "sudo service network-interface start" fails with "start: Unknown parameter: INTERFACE".
[11:10] <crdlb> icedwater: something like that
[11:10] <nipas> crdlb, what about flash player and windows moving?
[11:10] <speiros> Does anyone have any experience with OBM?  I have problems due to an incomplete download, which can't be removed.
[11:13] <speiros> My package manager isn't working.  I just reinstalled Network Manager because it wasn't working, and now Synaptic package manager doesn't work.  It tells me what to do, but it didn't work.
[11:18] <evilsherpa> hey all, i am unable to safely remove an ipod, i get an error msg stating that a partitian on the device is still active
[11:18] <saykou> hi guyz i have a problem when loggin in, it appears a message saying .ICEauthorathy could not update .. i search on forums and all but none of the solutions worked for me
[11:19] <brucekim> d
[11:19] <gothenburg> saykou: gdm?
[11:19] <saykou> gothenburg, gdm, whats that?
[11:19] <genis> hello. I have some trouble using xwii... has anyone there succeded in making it work in ubuntu 9.04 or later?
[11:19] <gothenburg> evilsherpa: is banshee (or whatever) still open?
[11:19] <alazyworkaholic> Does anybody know if ubuntu would support this USB 3.0 pci-e card? http://www.dealextreme.com/details.dx/sku.37638
[11:19] <gothenburg> saykou: you are a leet linux user?
[11:20] <vaagoh> !x restart
[11:20] <speiros> Why has my synaptic package manager failed???
[11:20] <Gryllida> !info gdm
[11:20] <saykou> gothenburg, not so much, i have the latest ubuntu ...
[11:20] <Vroomfondle> speiros: what do you mean by "failed"?
[11:20] <gothenburg> =)
[11:20] <evilsherpa> gothenburg, amarok, yes it is, butn its ejected inside the app
[11:20] <Gryllida> speiros: are you in sudoers group and how did it fail?
[11:20] <gothenburg> speiros: try aptitude?
[11:21] <vaagoh> I changed the button_layout using gconf-editor (apps/metacity/general/button_layout to menu:minimize,maximize,close) but it probably requires restarting X
[11:21] <vaagoh> how to restart x
[11:21] <speiros> Vroomfondle: It tells me when starting it up "E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem." but it didn't work.
[11:21] <speiros> What does aptitude do mate?
[11:21] <gothenburg> vaagoh: ctrl-alt-backspace?
[11:21] <gothenburg> or maybe it was delete
[11:21] <evilsherpa> gothenburg, although even with amark closed, it still says busy
[11:21] <gothenburg> ;p
[11:21] <speiros> Gryllida: I'll try that.  Probably I'm not.
[11:22] <alabd> ood day all ,  after booting ubuntu 10.04 free cd and selecting install choice , ubuntu goes to boot and proceed but it shows a black blank page before complete boot up , what's problem ???
[11:22] <arand> vaagoh: login again, or use alt + sysreq + k
[11:22] <speiros> sudo dpkg --configure -a
[11:22] <Gryllida> speiros: sudo root in terminal
[11:22] <rcsheets> ok, turns out using that debian kernel now prevents me from booting
[11:22] <speiros> Oops.lol
[11:22] <speiros> Yeah.
[11:22] <Gryllida> speiros: any sudo command in terminal - does it work?
[11:23] <speiros> It starts trying to add OBM, and doesn't install it.  It is working, as far as getting to that error.
[11:26] <nicofs> How do I install an application when all I have is a "git"-address?
[11:27] <rapha> red2kic: I want to see what USB devices are connected to my computer. What has gparted to do with that?!?!?
[11:30] <uros> hey! how can i find out the IP of a user I'm chatting with on MSN, skype, or most importantly QQ?
[11:32] <nicofs> How do I install an application when all I have is a "git"-address?
[11:32] <saimon> nicofs: git clone "git-address"   cd dir and read instructions
[11:33] <oCean_> !git | nicofs
[11:34] <saimon> Hi...I have an ubuntu server running as a vm host under vmware fusion. From my mac I can access the server (ssh) but I the host can't see the server. when I ping the gateway, it's unreachable. /etc/resolve.conf correctly sets the gateway ip. I'm a bit stumped right now
[11:36] <oCean_> saimon: resolv.conf is for DNS config (how to resolve names) not for default gateway.
[11:36] <saimon> oCean_: ofcourse...ok what should I be checking?
[11:36] <oCean_> saimon: however, if the server is reachable from mac, networksetup on the ubuntu server must be correctly configured, right?
[11:37] <saimon> oCean_: it looks like it is yes
[11:37] <oCean_> saimon: on the ubuntuserver "route -n" will show you the default gateway (line starting with 0.0.0.0)
[11:38] <oCean_> saimon: so the issue might be on the host running vmware. I'm not familiar with that..
[11:38] <SailorReality> how do u get a good python IDE i went sudo apt-get install python and it gave me a basic python command line
[11:39] <Balgan> sharat87, solved?
[11:39] <saimon> oCean_: having a hard time copy route output from host. hold on...
[11:39] <uros> Can anyone tell me how to find out the ip off the person I'm chatting with? Like on msn or skype or qq?
[11:39] <jpds> uros: You can't.
[11:39] <sharat87> Balgan: nope.. kind of gave up.. will say.. reinstall ubuntu lucid :)
[11:40] <sharat87> shouldnt've upgraded, i guess...
[11:40] <SailorReality> u can in windows
[11:40] <uros> if i'm connected to him, than why not?
[11:40] <uros> during file transfer.
[11:40] <uros> or sth. similar]
[11:40] <sharat87> Balgan: the package u suggested is there in synaptic, but in a weird condition.. says it is obsolete or removed..
[11:41] <airtonix> uros, because it's not direct transfer.
[11:41] <saimon> oCean_: http://pastebin.com/TTG3fdQU
[11:41] <uros> so there is now way to trace the transfer and the users ip?
[11:41] <Spiralmatrix> uros: in my irc client i can right click a name and do whois and it tells me what it thinks the ip of the user is
[11:42] <airtonix> uros, not unless you can gain access to the chat server and read logs or run monitor commands
[11:42] <sharat87> Balgan: shit I just realised I didn't get back to you after trying what u suggested.. so sorry.. :) and thanks for all your help :)
[11:42] <airtonix> Spiralmatrix, not talking about irc though.
[11:42] <Spiralmatrix> ah right :)
[11:44] <SailorReality> whats the command to see how much space i have on my harddrive
[11:44] <saimon> oCean_: just found a clue...ifconfig on mbp say gateway is infact different to what vmware says...trying different gateway
[11:44] <oCean_> saimon: ah, ok. Seems correct way to go - check the differences
[11:45] <Glowball> SailorReality: You can just see that in the GUI. Nautilus shows 'Free space' at the bottom for the partition you're on.
[11:45] <uros> a file transfer over skype or msn is not a direct one?
[11:45] <mechdave> SailorReality: df -h /
[11:45] <SailorReality> ok thanks
[11:45] <SailorReality> wtffff
[11:46] <SailorReality> how did i already use 2.2 gigs
[11:46] <SailorReality> i just got it
[11:46] <Glowball> SailorReality: Or you can see them all at once in System Monitor, tab 'File Systems'
[11:46] <SailorReality> must have been from when i let it install updates
[11:46] <SailorReality> i only let it have 5 gigs too
[11:46] <Glowball> (with more details)
[11:46] <oCean_> !enter | SailorReality
[11:46] <SailorReality> is there a way you can repartion the harddrive to let it have more space?
[11:47] <speiros> Does anyone know how to remove the Open Business Management fragments that are interrupting me from opening Synaptic Package Manager?
[11:47] <Fujk> I am installing a new box for web development so I need to install LAMP, but don't want anyone to access it externally. what is best method? get a firewall for the box itself?
[11:47] <Glowball> SailorReality: With GParted
[11:48] <SailorReality> awesome thanks
[11:48] <speiros> If not, can somebody direct me to another page I can go to where people might be more specialised in it?
[11:51] <bilalakhtar> Hi there, people. How do I shut down X so that I can run a command-line env?
[11:51] <bleah> what soft i need to register my desktop activity and internal system sound ?
[11:51] <masoud> give me a code for installing nvidia driver
[11:52] <masoud> give me a code for installing nvidia driver
[11:53] <masoud> terminal code
[11:53] <Chriisti> a program "AT SPI Registry" Not responding -> http://i49.tinypic.com/2ihwkdy.png   can help me?
[11:53] <bazhang> masoud, check in hardware drivers
[11:53] <bilalakhtar> masoud: if it isn't in hardware drivers, then you need to install it from repos or build from source
[11:53] <bilalakhtar> Hi there, people. How do I shut down X so that I can run a command-line env?
[11:53] <bazhang> bilalakhtar, stop gdm
[11:54] <d3vic3> Fujk: bind-address = 127.0.0.1" to the "[mysqld]" section of their my.cnf file to restrict access to localhost only.
[11:54] <d3vic3> Fujk: http://www.cyberciti.biz/faq/apache-restrict-access-based-on-ip-address-to-selected-directories/
[11:54] <bilalakhtar> bazhang: It doesn't work. It gives me an unresponsive prompt. From where shoul;d I shutdown gdm?
[11:54] <bazhang> bilalakhtar, ctrl alt F1 ?
[11:55] <bilalakhtar> bazhang: ok, from there. Then, how should I shutdown the computer?
[11:55] <bilalakhtar> bazhang: sudo shutdown now ?
[11:55] <bazhang> bilalakhtar, is this permanent?
[11:55] <bilalakhtar> bazhang: no, temporary
[11:55] <Fujk> d3vic3: hokay, nice. but it would not be more safe to install something like Firestarter firewall and block all external connections?
[11:55] <masoud> bazhang: haven't a terminal code for nv install?
[11:55] <gothenburg> :D
[11:56] <bilalakhtar> masoud: you wanna install nouveau
[11:56] <bilalakhtar> ?
[11:56] <bazhang> masoud, why not use the graphical hardware drivers
[11:56] <d3vic3> Fujk: restrictions are ok, +firewall = more security :)
[11:56] <bilalakhtar> bazhang: how should I shutdown from a prompt? sudo shutdown now ?
[11:57] <gunnarahlberg> Hi I have an embarassing question, where oh where did I define that <Ctrl> + u is shortcut to start a terminal window??? Ideas?
[11:57] <bazhang> bilalakhtar, you wish to shut down? I thought you merely wanted to stop gdm
[11:57] <bilalakhtar> ok, bazhang, trying it now
[11:57] <Fujk> d3vic3: you know anything else than firestarter?
[11:57] <bilalakhtar> bazhang: I want to stop x, then work,. then shutdown later
[11:57] <bazhang> Fujk, ufw
[11:57] <saimon> oCean_: well ok I've now got the host seeing the gateway but dns isn't working. i.e. e.g ping google.com I've checked /etc/resolv.conf and it appears correct
[11:57] <masoud> bazhang: haven 't gui
[11:58] <bazhang> !ufw
[11:58] <bazhang> Fujk, ^^
[11:58] <saimon> oCean_: any clues how to debug?
[11:58] <Fujk> bazhang: terminal only?
[11:58] <masoud> bilalakhtar: apt-get -i nouveau
[11:58] <crashev> Why there is no 64bit version of Flash in packages, instead some wrapper is used to run Flash,which is broken as hell and likes to eat whole cpu (npviewer.bin) ?
[11:58] <bazhang> Fujk, you can install gufw if you wish a graphical use
[11:59] <bazhang> !info gufw
[11:59] <masoud> !ufw
[11:59] <bazhang> Fujk, see above
[11:59] <qgel> can anyone help me getting my Steelseries usb soundcard to work properly? input works but output stopped working after i change "Connector" in Sound Preferences (even when i changed it back)
[12:00] <Fujk> bazhang: ok nice
[12:00] <itguru> Does anyone have a guide to running office 2007 in wine under ubuntu?
[12:00] <masoud> bazhang: i haven 't gui for install by gui and so i need for nv
[12:00] <bazhang> masoud, its a server?
[12:01] <bazhang> masoud, start up in recovery mode if not
[12:02] <masoud> ok
[12:02] <masoud> apt-get install nvidia==is work?
[12:02] <qgel> doesnt anyone have an idea what the sound problem could be?
[12:03] <bazhang> masoud, no, start up in recovery mode and then fix your drivers
[12:03] <xNice> hello...is there a stable torrentflux package for ubuntu ?
[12:03] <xNice> apt-get will do the whole job ?
[12:03] <bazhang> xNice, yes in repos
[12:03] <masoud> but i dont installed nvidia and cant recover!
[12:04] <bazhang> xNice, sudo apt-get install torrentflux
[12:04] <xNice> bazhang it will fully working ? because in debian the package is not stable...upload not working correctly
[12:04] <bazhang> masoud, you can't get into grub?
[12:04] <mac_nibblet> Heya people
[12:04] <mac_nibblet> i got a question about ubuntu server
[12:05] <bazhang> xNice, not tried it, should be though, why not try it and find out
[12:05] <administrator> fdgsdf
[12:05] <bazhang> administrator, english please
[12:05] <xNice> bazhang i am going to order a server from leaseweb  and wondering to choose debian or ubuntu
[12:06] <h4nc> can any one help me on how to remove multiple music files without going through and doing them one by one? if so please msg me
[12:07] <masoud> masoud, you can't get into grub?:غثس
[12:07] <al__> странно
[12:07] <masoud> tes
[12:07] <masoud> yes
[12:07] <bazhang> al__, /join #ubuntu-ru
[12:07] <masoud> I havent grub
[12:08] <masoud> and in terminal
[12:08] <bazhang> masoud, sure you do
[12:08] <bazhang> masoud, hold shift at boot
[12:08] <xNice> h4nc are they all in a folder ? are they named something like pritney* ?
[12:08] <red2kic> Y
[12:08] <masoud> ok tnx\
[12:08] <red2kic> Arr, wrong terminal.
[12:09] <jacksch> How do I prevent overheating?
[12:09] <h4nc> i have a lot of them seperated in folders, but the ones that arent in separated need to be erased
[12:09] <mac_nibblet> jacksch: installing a fan?
[12:09] <red2kic> Plug an external fan. That would works too.
[12:10] <h4nc> i would be willing to give someone access to my bow, but i don't want rooted
[12:10] <xNice> h4nc the ones you want to delete, do they share a same name like pritney1, pritney2 ?
[12:10] <xNice> h4nc becareful not to do that :D
[12:10] <h4nc> yea  most of them share the same name
[12:10] <poprazi> fuck suse
[12:10] <speiros> See you soon folks.  Time for me to use the 'ultimate' fix.  Reinstall system, and not have OBM, as noone knows anything about it.lol.  Thanks for the help previously good people.  See you on the new install.
[12:11] <jacksch> red2kic: When you say external fan, do you mean a regular electric fan?
[12:11] <xNice> h4nc good so what the names looks like ?
[12:11] <red2kic> jacksch: Sadly, yes. That's a poor man's method.
[12:11] <red2kic> jacksch: More likely a lazy man's method though. ;)
[12:11] <h4nc> standby one second and ill get you an example
[12:11] <jacksch> red2kic: Yes, that pretty much describes me.
[12:12] <xNice> k
[12:13] <h4nc> 03_Underwater_World_-_Movin'_Melodies_-_
[12:13] <jacksch> red2kic: How much does an internal fan cost?
[12:14] <xNice> h4nc the similar looks like *Underwater_World_-_Movin'_Melodies* ?
[12:14] <h4nc> jacksch they are pretty cheap on newegglcom
[12:14] <h4nc> yeah
[12:14] <red2kic> jacksch: I just know regular electric fan costs $10-15 at your retail outlet store.
[12:14] <red2kic> jacksch: As for internal fans, probably less.
[12:15] <Oli``> Is there any way to get the old volume control back in the notification area?
[12:15] <red2kic> jacksch: (or more). Check out Best Buy or whatever.
[12:15] <xNice> find / -name *Underwater_World_-_Movin'_Melodies* -exec rm -f {} \;
[12:15] <red2kic> Oli``: "gnome-volume-control-applet"
[12:15] <h4nc> thanks
[12:16] <Oli``> red2kic: cheers
[12:16] <xNice> h4nc you welcome
[12:18] <erkan^> !nano
[12:18] <jacksch> red2kic: Is it possible to up the speed of the fan?
[12:18] <jacksch> red2kic: in the computer?
[12:19] <h4nc> one more question, does anyone know how to change the login screen on 10.04 like you could on 9.04?
[12:19] <red2kic> !info thinkfan | jacksch
[12:19] <red2kic> jacksch: Also, http://ubuntuforums.org/showthread.php?t=846480
[12:20] <red2kic> jacksch: http://ubuntumanual.org/posts/127/how-to-control-fan-speed-lm-sensors-in-ubuntu
[12:21] <jNovice> Hi I try to install mysql_pdo on ubuntu but I get error during phpize http://pastebin.org/324331 Could anybody help
[12:23] <SailorReality> how do u pronounce ubuntu ew bun two or n00banto or Ub bunt to
[12:24] <geirha> SailorReality: http://en.wikipedia.org/wiki/Ubuntu_(operating_system)
[12:25] <indus> SailorReality, pronounce however you want to
[12:26] <indus> SailorReality, its like volkswagen , they say it with an f, but i still say it with a v
[12:26] <indus> cos that is how i like it
[12:27] <gunnarahlberg> Hi I have an embarassing question, where oh where did I define that <Ctrl> + u is shortcut to start a terminal window??? Ideas?
[12:28] <Oli``> gunnarahlberg: in compiz?
[12:28] <gunnarahlberg> Oli`` Hi, no, I tried killing compiz but the shortcut is still there.
[12:29] <gunnarahlberg> I guess there are a million places to define shortcuts in compiz + gnome + xmodmap + .. where else?
[12:29] <Bzek> How to disable window borders?
[12:29] <Oli``> gunnarahlberg: try looking in System>Prefs>Keyboard Shortcuts then
[12:30] <gunnarahlberg> Oli`` done. not there. more suggestions?
[12:31] <Oli``> gunnarahlberg: I'd probably start grepping through gconf (and other home files) to find anything that launches gnome-terminal
[12:32] <Chickenery> Hi, I've removed gnome-terminal from menu of an user, and disabled the alt+f2, but i didnt think it through - how do i run a command on it now?
[12:33] <Chickenery> i've got root, i just need to know how to run a command under an account without alt+f2 or gnome-terminal
[12:33] <Oli``> Chickenery: control+alt+f1, login, export DISPLAY=:0, run command
[12:34] <gunnarahlberg> Oli`` thx
[12:35] <aliahmad> hi,i m ali from pak
[12:35] <aliahmad> looking for sincere & true friendship
[12:35] <roxlu_> hi! How can I check which directories are on my root partition, my root partition is full and I need to cleanup some stuff
[12:35] <bazhang> aliahmad, this is not the channel for that
[12:36] <elky> aliahmad, this is a channel for technical support only. #ubuntu-offtopic is for family-friendly off-topic chatter
[12:36] <genis> hi. I have a little problem compiling an application. when I try to compile it complains about an undefined symbol, but when I check the corresponding library that symbol compiler was c omplaing about it does exists... any idea?
[12:36] <aliahmad> so where should i go?
[12:37] <pure_hate> aliahmad, #gaygeeks?
[12:38] <gbachot> hi - is there a support channel for mythbuntu?
[12:39] <Gabbie> Hi, is it possible to tell if my home dir is encrypted or not? I can't remember wether I chose the option at install or not, this is on lucid
[12:39] <bazhang> gbachot, #ubuntu-mythtv
[12:45] <Firstgear> what process is the package installer on ubuntu? it's frozen up
[12:47] <Fujk> anyone know a program where you can sticky something to the desktop background? For example tail -f /var/log/syslog or a PNG that updates X seconds... etc.
[12:47] <geirha> !conky | Fujk
[12:48] <hyphenex> I keep getting "PHP Warning:  PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626+lfs/pdo_sqlite.so' - /usr/lib/php5/20090626+lfs/pdo_sqlite.so: cannot open shared object file: No such file or directory in Unknown on line 0" when launching php.. is there away to wipe all setting changes then re-install from scratch?
[12:48] <geirha> Fujk: Ok, no factoid on that, but it sounds like you want conky. Search for it on the forums
[12:48] <fsdjmellisse> Hello all
[12:48] <fsdjmellisse> need help pleaz
[12:49] <fsdjmellisse> i want to boot manually from Grub
[12:49] <Fujk> geirha: ok thanks
[12:49] <geirha> Firstgear: That doesn't sound good. What's the output?
[12:50] <Chickenery> Oli``: thank you
[12:50] <geirha> Fujk: Or this might be a better starting place: http://en.wikipedia.org/wiki/Conky_(software)
[12:51] <Firstgear> geirha: I cancelled a package while it was downloading now I can't close the package installer :)
[12:52] <helpinstallubunt> is it possible to use alternative installation on live cd i mean choose what to install ex. fluxbox rather than gnome ?
[12:52] <geirha> Firstgear: Oh, there are several «package installers», which menu entry did you use?
[12:52] <BluesKaj> Firstgear, open synaptic /edit/fix broken packages/apply
[12:53] <geirha> helpinstallubunt: No, I think you'll want the minimal cd for that
[12:53] <mendel1> hi everyone! can somebody tell me how to completely remove mysql-server on ubuntu with all config files? and then install again as a fresh package? apt-get purge mysql-server && apt-get autoremove && apt-get clean && apt-get install mysql-server does not help with it. thanks in advance!
[12:53] <helpinstallubunt> geirha: no workaround for this ?
[12:53] <inveratulo> mendel1: shouldn't there be an 'aptitude remove mysql-server --purge' in there somewheres ?
[12:53] <geirha> helpinstallubunt: You can install the regular desktop, then install fluxbox after it is installed, and optionally remove gnome.
[12:54] <BluesKaj> Firstgear, or you can open a terminal anddo, sudo fuser -vki /var/lib/dpkg/lock
[12:54] <geirha> BluesKaj: No no no, fuser -k sends the KILL signal by default
[12:54] <geirha> BluesKaj: Should also add -TERM to the command
[12:55] <helpinstallubunt> geirha: i really need a light DE if i install gnome first will it messing my flux, in the term of RAM usage ?
[12:55] <Bzek> How to disable window borders like in Ubuntu Remix? (no maximize, minimize and close button)
[12:56] <geirha> helpinstallubunt: gnome will only use RAM when it's running. If you choose fluxbox instead of gnome when logging in, gnome won't be running.
[12:56] <BluesKaj> geirha, well, been using that command for a long time ...wht's changed , it used to be a standard command for package install lockups
[12:56] <mendel1> inveratulo: this doesn't help neither
[12:57] <helpinstallubunt> geirha: ok will try
[12:57] <Zeek> Heya, I had a question about 10.04...when I get a Update Manager pop up showing updates, I see both Check and Install Updates enabled.  If I just press Install Updates it just sits there.  i need to first do Check where it will finally prompt for the password, then Install Updates works...is there something I am missing?
[12:57] <geirha> BluesKaj: It hasn't changed, it's been like that for a long time. Doing kill -9 should always be a last resort, always try SIGTERM first.
[12:57] <inveratulo> mendel1: maybe describe your problem then?  perhaps reinstalling isn't the solution
[12:57] <helpinstallubunt> geirha: thanks for the support
[12:57] <insanity99> hey huys i just installed vim, where do i open it?
[12:58] <insanity99> guys*
[12:58] <coony> hello
[12:58] <BluesKaj> geirha, I didn't type anything about kill -9
[12:58] <airdem> hello
[12:58] <geirha> BluesKaj: That's what fuser -k does, kill -9 on each process which has the file open
[12:58] <mendel1> inveratulo: I broke some config files, then removed them. Then I understood, I can not recover config and decided to reinstall
[12:58] <airdem> i have problems booting from my newly created usb stick
[12:58] <coony> Have i a problem with istallation of ubuntu?
[12:59] <geirha> BluesKaj: Unless you add -TERM which tells it to use the TERM signal (as kill without -9 does)
[12:59] <tkbros> how to create a ftp server?
[12:59] <mendel1> inveratulo: now during starting mysql-server /etc/init.d/mysql: WARNING: /etc/mysql/my.cnf
[12:59] <geirha> BluesKaj: http://stackoverflow.com/questions/690415#690631
[12:59] <airdem> it says "init line 7" and has problem with /dev/sdd sdb sdx
[13:00] <yami> hai...........
[13:00] <mendel1> inveratulo: I just wanna to say mysql-server reinitialize itself again and its configs
[13:00] <yami> hai............
[13:00] <inveratulo> mendel1: what happens if you do a 'aptitude reinstall mysql-server'  does it put the my.cnf back in place ?
[13:00] <BluesKaj> geirha, I assume the user is using the terminal yes
[13:00] <Gabbie> Hi, is it possible to tell if my home dir is encrypted or not? I can't remember wether I chose the option at install or not, this is on lucid
[13:00] <coony> i think that there is a block of Hd.The qustion is.What s command can i use to see a block of hd?
[13:01] <mendel1> inveratulo: it reinstalls successfully, but not initializes the configs. again, during /etc/init.d/mysql start - WARNING: /etc/mysql/my.cnf cannot be read
[13:01] <justwatm> i think this is "df"
[13:02] <inveratulo> mendel1: so my.cnf isn't there at all or its just boned?
[13:02] <geirha> BluesKaj: Huh?
[13:02] <justwatm> coony : i think this is "df"
[13:03] <mendel1> inveratulo: yes it missed
[13:03] <coony> justwatm: i use only df or sudo badblock
[13:03] <BluesKaj> geirha, so how should the command be structured for safety then?
[13:04] <geirha> BluesKaj: sudo fuser -vki -TERM /var/lib/dpkg/lock
[13:04] <mendel1> inveratulo: and even I copied from another machine under ubuntu that my.cnf - then mysql-server failed to start
[13:04] <inveratulo> mendel1: Hmm... I am not sure of the 100% proper way to do it, but I would first do a 'aptitude remove mysql-server --purge' and then do a 'find / -name mysql' and remove everything by hand
[13:05] <Georgerer> Hi there, I have a Nokia 2323 and want to synchronize its contacts with Evolution via Bluetooth. How do I do that?
[13:05] <inveratulo> mendel1: Doing the aptitude remove probably doesn't remove all the little hangerons, especially if you've been toying around with it
[13:05] <helpinstallubunt> one more thing i have a /home partition (separate) will the installer detect the mount point even though i dont define the mount point in the installation ?
[13:05] <geirha> inveratulo: It's either «aptitude purge» or «apt-get remove --purge» ...
[13:06] <Slart> apt-get purge works too =)
[13:06] <bleah> how can i fix this error ? http://paste.ubuntu.com/448218/
[13:06] <geirha> helpinstallubunt: It won't mount it automatically if you don't specify it.
[13:06] <mendel1> inveratulo: yes, I guess so too. Once I already faced this problem and solved it with a google. But can not find this solution again
[13:06] <Slart> bleah: try   sudo apt-get install build-essential
[13:07] <geirha> Slart: Oh, I'm pretty sure it didn't have that command last I tried, though I haven't used apt-get for years so i guess it's gotten added sometime since then.
[13:07] <BluesKaj> geirha, and I was about to tell Firstgear to run , sudo dpkg --configure -a , to clear any broken dependencies
[13:07] <Slart> geirha: I think it's pretty new.. but it has existed for at least a year or so
[13:07] <mendel1> inveratulo: there was a magic command that cleaned all, but I can't remember it
[13:08] <helpinstallubunt> geirha: so how to solve this, i specify a / root partion too will it make a /home directory
[13:08] <Slart> geirha: not sure if it's a ubuntu feature or something from upstream
[13:08] <inveratulo> mendel1: I am not sure of that.  I usually spend most of my time making sure mysql configs never gets removed/modified :-p
[13:08] <geirha> helpinstallubunt: Yes, it will put /home on /. If you want to use your current home partition, set it to /home in the installer, and make sure to not check the box for formatting it.
[13:09] <helpinstallubunt> geirha: but the installer wont let me
[13:09] <Dr_Willis> helpinstallubunt:  you could always move  /home to point at your partition, after install. so the installer dosent even try to touch it.
[13:10] <geirha> helpinstallubunt: How so?
[13:10] <coony> what s the complite command of badbloch to see if is there error on hd?
[13:10] <helpinstallubunt> Dr_Willis : just set it in mtab right ? sudo grub-update grub
[13:10] <geirha> Slart: Hm, I see it in Hardy too. I might have been mistaken all together.
[13:11] <Dr_Willis> helpinstallubunt:  in fstab. not mtab
[13:11] <helpinstallubunt> Dr_Willis : ok
[13:11] <Dr_Willis> helpinstallubunt:  and that dosent ahve anything to do with grub :)
[13:11] <helpinstallubunt> !partition
[13:11] <Slart> geirha: well.. it's no big deal really.. just some syntax sugar =)
[13:11] <geirha> Slart: Indeed :)
[13:12] <helpinstallubunt> Dr_Willis : ok thanks
[13:12] <Georgerer> Hi there, I have a Nokia 2323 and want to synchronize its contacts with Evolution via Bluetooth. How do I  do that?
[13:13] <ikonia> gamphani: lokki is your best bet,
[13:17] <badpenguin86> Chromium cannot load my user profile, but I can't find a profile as a .folder in my home directory. Any idea?
[13:18] <martez89> how can I change the bookmark bar font in chromium? the text is too big currently
[13:19] <estupatufraks> hola gente nececito ayuda con mi PC tengo Ubuntu 9.04
[13:19] <telmich> good evening
[13:19] <estupatufraks> alguien habla español?
[13:19] <geirha> !spanish | estupatufraks
[13:20] <telmich> when trying to install ubuntu 10.04 next to apple mac os x 10.6 on a powerbook (=intel), should I tick the "install bootloader" flag?
[13:20] <telmich> will this provide a boot entry for mac os x?
[13:20] <simmerz> Hi. I'm trying to send a file via bluetooth to another computer. When I use the Send To nautilus extension, I don't get a list of devices to choose from. any ideas/
[13:20] <estupatufraks> o
[13:21] <badpenguin86> telmich, Did you install REFIT on the Mac side?
[13:21] <Dr_Willis> simmerz:  you do have teh device paired with the pc?
[13:21] <telmich> badpenguin86: no
[13:21] <telmich> badpenguin86: is that still needed / the recommended way?
[13:22] <simmerz> Dr_Willis: does it have to be paired? surely I can send to an arbitrary device, but the remote side has to accept it
[13:22] <badpenguin86> telmich, It is what worked for me. Never got Gnome to properly boot OS X
[13:22] <Promythyus> Got a problem with mysql-server-5.1. The recent update (5.1.41-3ubuntu12.3) caused apt-get upgrade to hang (left it for at least 24hrs). This caused mysql-server-5.1 to be corrupted, thus I had to remove with apt-get remove --purge. I have now reinstalled with apt-get install mysql-server-5.1, which seems to have gone fine EXCEPT that I cannot actually start the server, sudo start mysql hangs, and running start with the v
[13:23] <Dr_Willis> simmerz:  err.. no - you normally have to pair bluetooth gizmos for them to send to each other.
[13:23] <Dr_Willis> simmerz:  otherwise all sorts of nasty things can start happening
[13:23] <badpenguin86> telmich, If you install GRUB to the partition that Ubuntu is installed on, then boot into OS X, and install REFIT, it should find Ubuntu
[13:23] <simmerz> Dr_Willis: I've never had that before
[13:24] <simmerz> Dr_Willis: btw, this worked fine under Karmic. Just not under Lucid
[13:24] <Promythyus> @Dr_Willis; I know for a fact that I don't need to pair my mobile phone with others before it can recieve files
[13:24] <Dr_Willis> simmerz:  i recall some old bluetooth 'attacks' years back  when these things started getting common. Picture sitting on a buss and you get 20+ 'requests to accept' some spam/virus..
[13:24] <Dr_Willis> Promythyus:  every phone ive ever had i have had to pair.
[13:24] <Georgerer> Hi there, I have a Nokia 2323 and want to synchronize its contacts with Evolution via Bluetooth. How do I  do that?
[13:24] <Georgerer> I have already set up gnokii properly and it can read my contacts.
[13:24] <Dr_Willis> Promythyus:  perhaps they are auto-pairing when the file is sent.
[13:25] <simmerz> Dr_Willis: you need to pair to use specific devices (HID, or headsets etc)
[13:25] <Georgerer> But how can I make Evolution know that too?
[13:25] <simmerz> pairing is just so a device knows that a given extension device is bound to it and not another device
[13:25] <simmerz> but sending files is arbitrary
[13:25] <simmerz> *should* be standard obex stuff
[13:26] <Dr_Willis> 'should' :)
[13:26] <Dr_Willis> so i can sit with a pc at a busy intersection and just start sending to everyone that walk by.
[13:26] <simmerz> Dr_Willis: yep
[13:26] <simmerz> if you can do it fast enough
[13:27] <simmerz> That's how bluetooth advertising works
[13:27] <Dr_Willis> Cant say taht ive ever seen a bluetooth advert. I have seen/heard of bluetoth viruses.
[13:27] <simmerz> you walk into a store, and it sends you something that you can show the cashier - you have to accept it first
[13:27] <Dr_Willis> but this is getting away friom ubuntu  perhaps some reading ---> http://en.wikipedia.org/wiki/Bluetooth#Pairing
[13:27]  * simmerz works in advertising
[13:28] <Dr_Willis> simmerz:  sounds like somthuing that would make me want to not shop at that store
[13:28] <simmerz> Dr_Willis: likewise, but it's still there
[13:28] <Dr_Willis> sounds like a good way to trick someone into getting a virus also
[13:28] <dr0id> hey guys
[13:28] <patdk-wk> heh, years ago it was all the rage in the uk
[13:28] <patdk-wk> sending bluetooth sms back and forth to people
[13:28] <dr0id> I suddenly started my laptop(ubuntu) and now nothing is working, like mysql, php, pidgin, nothing, why is that happenning?
[13:29] <Dr_Willis> Thats a good artical on bluetooth. :) lots of neat info
[13:29] <simmerz> patdk-wk: I remember that - you'd find someone on the tube who had bluetooth enabled and send them a random message
[13:29] <dr0id> it was working fine this morning
[13:29] <simmerz> and wait for them to look up :D
[13:29] <struhevol> just deleted my pannel by mistake how do i get it back
[13:30] <dr0id> anyone?
[13:30] <simmerz> Dr_Willis: as it says, pairing is for use where you don't want user intervention in the connection
[13:30] <SailorReality> lol stru u pwnt urself
[13:30] <simmerz> ie - you turn your mouse on and you want it to just work with your machine, or your headset and you just want calls to get routed through it.
[13:30] <dr0id> ANYONE? its URGENT
[13:30] <Dr_Willis> !resetpanel | struhevol
[13:30] <red2kic> Lol. I just sent myself some image via bluetooth without pairing.
[13:31] <BluesKaj> dr0id, how are you chatting with us if nothing is working ?
[13:31] <dr0id> this is my PC
[13:31] <dr0id> ohh, please, no time for jokes
[13:31] <dr0id> I am worried now
[13:31] <Dr_Willis> dr0id:  check the logs.
[13:31] <dr0id> all my business sensitive data was in laptop
[13:31] <Dr_Willis> dr0id:  start a service.. look for errors
[13:31] <dr0id> all my mysql dbs are lost, I can't login :(
[13:31] <simmerz> dr0id: did you by mistake do a rm -rf / ?
[13:31] <Georgerer> Hi there, I have a Nokia 2323 and want to synchronize its contacts with Evolution via Bluetooth. How do I  do that?
[13:31] <badpenguin86> Is there anyway to plug thunderbird into the messages  applet in Lucid?
[13:31] <Dr_Willis> dr0id:  clarify what  'nothing is working' actually means also.. dosent boot? dosent powerup? ect..
[13:32] <Georgerer> I have already set up gnokii properly and it can read my contacts.
[13:32] <dr0id> Dr_Willis: well
[13:32] <dr0id> its booting
[13:32] <dr0id> desktop comes
[13:32] <dr0id> folders opening
[13:32] <dr0id> file sopening
[13:32] <dr0id> but certain thing sbehaving bad
[13:32] <dr0id> no pidgin working
[13:32] <FloodBot4> dr0id: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[13:32] <dr0id> no skype working
[13:33] <Galerien> !enter | dr0id
[13:33] <Soyo> So I upgraded from server 8 to 9.10 but I had a problem upgrading to 10... It might because I put a GUI on my server which is blasphemous I know. http://pastebin.com/nD69qhvp
[13:33] <struhevol> dam it did not work
[13:33] <struhevol> guess i have to reinstall ubuntu now
[13:33] <ghost> haven't body
[13:33] <struhevol> dam
[13:33] <dr0id> DAMN
[13:33] <ghost> hehe
[13:34] <Dr_Willis> dr0id:  if its that critucal a box. I think step 1 would be for you to backup all your imporntant files/data
[13:34] <dr0id> Dr_Willis: am I muted?
[13:34] <dr0id> or can you gusy hear me?
[13:34] <Dr_Willis> dr0id:  no you are not
[13:34] <andril> hello all
[13:34]  * patdk-wk watchs dr0id get banned again for overusage of the enter key
[13:34] <Guest98851> 好高兴
[13:34] <struhevol> so if i deleted my pannel there is no way to get it back
[13:35] <patdk-wk> ok, so now privmsg's
[13:35] <Soyo> !jp | Guest98851
[13:35] <Dr_Willis> !resetpanel | struhevol
[13:35] <geirha> struhevol: Deleted how? You removed the package?
[13:35] <struhevol> that did not work
[13:35] <struhevol> no
[13:35] <simmerz> Dr_Willis: I still need bluez installed right?
[13:35] <Dr_Willis> struhevol:  then you broke somthing badly.
[13:36] <struhevol> i right clicked it and then i clicked delete pannel like a dum ass
[13:36] <geirha> struhevol: aptitude search gnome-panel   it's got an i there right?
[13:36] <Dr_Willis> simmerz:  no idea. bluetooth worked for me  from the initial install.  FIRST time bluetooth actuallh has worked for me on ubuntu
[13:36] <Dr_Willis> struhevol:  you have NO panels or just 1 panel?
[13:36] <simmerz> Dr_Willis: heh. I had to install various bits previously. This is an upgrade from Karmic, so there *may* be some muck left over from that
[13:36] <Slart> struhevol: if you deleted the panel you'll have to create a new one.. so no.. you can't get the old panel back.. you can create a new one that looks exactly the same though... if gnome-panel just crashed then you can just reboot and it will come back
[13:36] <simmerz> Dr_Willis: do you have bluez installed?
[13:37] <Dr_Willis> simmerz:  not sure,  :) let me look
[13:37] <Georgerer> Anyone knows how one can synchronize Evolution with a mobiile phone?
[13:37] <simmerz> Georgerer: synce?
[13:37] <Dr_Willis> simmerz:  it does seem to be installed
[13:37] <struhevol> wow that worked
[13:37] <struhevol> i was doing it wrong
[13:38] <simmerz> I also have bluetooth, gnome-bluetooth installed.
[13:38] <struhevol> that made my panel come back
[13:38] <Georgerer> simmerz: synce ... what?
[13:38] <Soyo> So I upgraded from server 8 to 9.10 but I had a problem upgrading to 10... It might because I put a GUI on my server which is blasphemous I know. http://pastebin.com/nD69qhvp
[13:38] <struhevol> how do i remove kubuntu-desktop
[13:39] <cooper_> ололо
[13:39] <struhevol> sudo aptitude remove kubuntu-desktop
[13:39] <struhevol> is that it
[13:39] <Galerien> struhevol: I use "sudo tasksel'
[13:39] <Soyo> sudo apt-get remove
[13:40] <simmerz> Georgerer: is it a winmo or some other?
[13:40] <Dr_Willis> !puregnome
[13:40] <Dr_Willis> Hmm what is that factoid.. i never cen rember it
[13:40] <Georgerer> simmerz: Nokia Series40
[13:40] <Galerien> !purgnome
[13:40] <Galerien> arff...
[13:40] <BluesKaj> !pure-gnome
[13:41] <BluesKaj> nope
[13:41] <Soyo> can a do a -f for this?  http://pastebin.com/nD69qhvp
[13:41] <DJones> Dr_Willis: Thats the right factoid, it should say "If you want to remove all !KDE packages, type « sudo apt-get --purge remove kdelibs4c2a kdelibs5-data && sudo apt-get install ubuntu-desktop » into a !terminal
[13:42] <Lazydude> does anyone know the best backup tool so i can back up the kernel in incident if future problems arise.
[13:42] <Dr_Willis> Lazydude:  why do you think that will help? Are you doing somthing to the kernel?
[13:42] <patdk-wk> you shouldn't need anything to backup the kernel
[13:42] <patdk-wk> unless you want it on a different disk
[13:42] <patdk-wk> then just copy /boot :)
[13:42]  * Soyo <-- nobody can help him :(
[13:43] <Dr_Willis> I tend to do clean instsalls Soyo
[13:43] <simmerz> Georgerer: yo'll probably want Multisync then
[13:43] <Lazydude> no, but i followed some steps online about adjusting my wifi internet rate to 54mbs and my wifi driver was out of whack after i did it.
[13:43] <thrillERboy> I'm trying to checkout ubuntu 10.04 but my keyboard and mouse freezes often :(
[13:43] <Dr_Willis> Soyo:  but having a gui installed shouldent affect it.
[13:43] <LjL> Soyo: eh, do you have the Proposed repositories enabled?
[13:43] <Georgerer> simmerz: I've installed it but I can't find a way to use it in Evolution.
[13:43] <Lazydude> it was stuck on 11mbps before, so i had to do a reinstall. now all is perfect
[13:43] <struhevol> i am ubuntu 10.4
[13:43] <struhevol> on
[13:43] <struhevol> its ok i guess
[13:43] <kreppnar> thrillErboy: you running it from a live cd?
[13:44] <struhevol> this is the first distro i ever used
[13:44] <thrillERboy> yes kreppnar
[13:44] <simmerz> Georgerer: have you installed the evolution plugin for it?
[13:44] <struhevol> as a starter i picked this one
[13:44] <kreppnar> thrillErboy: how fast is the drive?
[13:44] <Dr_Willis> struhevol:  you do know  Ubuntu basics? :)
[13:44] <Dr_Willis> !manual | struhevol
[13:44] <thrillERboy> cd-dvd drive kreppnar ?
[13:44] <kreppnar> thrillErboy: yeah
[13:44] <thrillERboy> 52x cd and 16x dvd kreppnar
[13:45] <thrillERboy> got it like 3 years b4
[13:45] <Soyo> Dr_Willis, LjL It seems to be trying to remove ubuntu-desktop marked its marked not to but how do I override and upgrade anyway without removing it?  http://pastebin.com/nD69qhvp
[13:45] <Lazydude> i had network manager and my wifi worked at 11mbps.  i tried some sudo force rate command in terminal but it didnt work.  so then i installed ndiswrapper and wicd.
[13:45] <kreppnar> thrillErboy: k ... hmm..i wouldn't think it would give you much problems if it was installed..just might be cause its on a cd
[13:45] <struhevol> thanks ubottu
[13:45] <struhevol> that was helpfull did not know about that
[13:45] <Dr_Willis> Soyo:  it wont hurt if it removes a metapackage
[13:45] <LjL> Soyo, answer my question first, do you or do you not have the Proposed repositories enabled? because from your output, it would seem that way
[13:45] <Dr_Willis> Soyo:  you can always reinstall it later
[13:46] <Georgerer> simmerz: Yes. And I have restarted Evolution.
[13:46] <Dr_Willis> struhevol:  yea. they need to make a big icon pointing to that manual on the desktop :)
[13:46] <thrillERboy> Okey, If I switch the mouse to USB mouse it works for some time :/
[13:46] <thrillERboy> anyway thanks kreppnar
[13:46] <simmerz> Georgerer: not sure unfortunately then. All I know is that's the way it's supposed to be done
[13:46] <kreppnar> thrillErboy:  Aye, np
[13:46] <Galerien> !ubottu | struhevol
[13:46] <struhevol> what desktop
[13:46] <Soyo> Dr_Willis, true I could. LjL, I am not sure checking...
[13:46] <Georgerer> Mh, somehow Ubuntu sucketh mightily ... The shipped Gwibber doesn't work and Evolution doesn't sync ...
[13:47] <struhevol> o shit that bot is sick
[13:47] <struhevol> factoids
[13:47] <Galerien> sick?
[13:47] <simmerz> Georgerer: gwibber works fine for me.
[13:47] <Georgerer> simmerz: It doesn't work with identi.ca
[13:48] <Galerien> simmerz: not for me, huge memory leaks ;)
[13:48] <Georgerer> Great. Now Ubuntu has decided that it doesn't want Bluetooth to work anymore.
[13:48]  * simmerz steps aside for a someone with more knowledge to help
[13:48] <Galerien> Georgerer: I'm sure you help him with that in some way ;)
[13:49] <Lazydude> this is the best user friendly distro of linux ever in my experiences with my hardware.  only thing that needs to worked out are the boot and shut down image sizes.  i already fixed that with a tweak though
[13:49] <twomonkies> ls
[13:49] <Arcank> hello :)
[13:49] <Snadder> Does ubuntu server 64bit have an dvd with all packages? I only see the cd on ubuntu.com.
[13:49] <struhevol> the terminal is verry usefull
[13:49] <Lazydude> actually it probably is the video card companies fault
[13:49] <struhevol> everything goes in there
[13:49] <Georgerer> Galerien: Help whom with what?
[13:50] <Arcank> I'm trying to install dos2unix on 10.04. I installed tofrodos, but it doesn't seem to be in the package
[13:50] <Galerien> Georgerer: help ubuntu taking the decision to drop blue-tooth, it's just a joke dude
[13:50] <Dr_Willis> Snadder:  the dvd dosent come with 'all' packages anyway. it does include a few extra packages I think and more languages.. but im not sure there is a server dvd .
[13:50] <mcl0vin> how do i use -purge with to completely remove a pkg i compiled from source and i used checkinstall
[13:50] <Galerien> Snadder: have you looked at the torrent section?
[13:51] <Dr_Willis> tofrodos - Converts DOS <-> Unix text files, alias tofromdos
[13:51] <Dr_Willis> !info tofrodos
[13:52] <Snadder> Galerien, where is the torrent section?
[13:52] <Soyo> LjL I went to software sources but its hard to see the actual names of the repositories that way.. Is there a command line way to do this or a file to cat?
[13:52] <LjL> Soyo: cat /etc/apt/sources.list
[13:52] <mcl0vin> how do i use -purge with to completely remove a pkg i compiled from source and i used checkinstall
[13:52] <Georgerer> Galerien: Its not that funny.
[13:53] <Dr_Willis> mcl0vin:  if you made a deb from it.. same as you do any other package sudo apt-get remove --purge whatever
[13:53] <BluesKaj> mcl0vin, usually there's areadme file with uninstall instructions
[13:54] <tgywa> How do I know if the package I am installing is from a CD room?
[13:54] <Galerien> Snadder: hu... don't know, let me check it out
[13:54] <mmarc__> hi, the recent update to 10.04 from 9.10 unscrewed my windows 7 installation on /dev/sda1, it now refuses to boot. On upgrade I rejected grub update and asked to leave it as it is, however W7 stopped booting, endless black screen with cursor. I checked that /etc/grub.d/30_os-prober founds windows partition on (hd1,0), and exactly the same record is used in grub.cfg. What might be the issue, could you please help to fix it? ;)
[13:54] <Soyo> LjL http://pastebin.com/aVmKiYhc <-- seems like a have a few fails in there...
[13:55] <tgywa> Cos ... I am install postfix. .... commented out all lines in sources.list ...and only the cdrom line is left
[13:55] <LjL> Soyo: remove the last uncommented line from there (the one with proposed), then "sudo apt-get update" and then try again upgrading
[13:55] <Galerien> Snadder: http://www.ubuntu.com/desktop/get-ubuntu/alternative-download
[13:55] <tgywa> the installaiton is going well ... but would like to make sure that I am installig it from the cd rom
[13:55] <Soyo> LjL ok
[13:56] <bagua> hi all.  I wonder if you can help. I have Ubuntu 10.4 on a laptop and a desktop. Cron jobs run as scheduled from the laptop.  On the desktop they don't.  Didn't work yesterday.  On first boot up this morning they worked fine!  Rebooted to experiment.  Now don't work...
[13:56] <Georgerer> Now I have setup up multisync and set gnokii and evolution to synchronize the contacts.
[13:56] <Galerien> Georgerer: sorry you took it this way, but with computers, 95% of the bugs/problems are between the chair and the keyboard
[13:56] <Georgerer> It claims to work but no new contacts appear in Evolution.
[13:56] <bagua> Not sure why the same script works on one ubuntu and not the other.  Upstart?
[13:56] <Georgerer> Galerien: I do know that.
[13:56] <Georgerer> But this just sucks.
[13:56] <Georgerer> Galerien: Gwibber is definitely not working.
[13:57] <Georgerer> Galerien: And Multisync at least isn't doing what its claiming to do.
[13:57] <sheikh> hello
[13:57] <Lazydude> mmarc you should probably install grub then
[13:57] <ks3> bagua, Is the issue that cron isn't running, or that it is running, but isn't running your script?
[13:58] <Galerien> Georgerer: I give you gwibber, mine has memory leaks, but my install isn't good...
[13:59] <mmarc__> ugh, anyone?? What the hell 10.04 updater does with grub, and why can't it simply leave it alone?
[13:59] <sheikh> Can anyone tell me where is loging program (the screen where we type username and password to log into user session)  on ubuntu 8.10
[13:59] <bagua> hi ks3.  Ran fine after the first morning boot.  Not the second boot...
[13:59] <Georgerer> Galerien: I have just a plain Ubuntu 10.04 install.
[13:59] <bagua> SO Let me see
[13:59] <bagua> to see if it is running I would look for the cron running in the backgorune
[14:00] <bagua> background.  Right?  That is to answer your question about it not running
[14:00] <tgywa> I am trying to install postfix from CD room, and got the error " unable to fetch ssome archives ... postfix_2.7.0-1_amd.dev File not found
[14:00] <tgywa> ?
[14:00] <bagua> Not sure of the command to do that looking...
[14:01] <wash> Does anyone know if either firefox or chromium supports news:// urls, either natively or through plugins?
[14:01] <Promythyus> nobody has any answers for my mysql problem?
[14:01] <sheikh> Can anyone tell me where is login  screen program (the screen where we type username and password to log into user session)  on ubuntu 8.10?
[14:01] <ks3> bagua, On 10.04, you can run 'service cron status'
[14:01] <simmerz> Promythyus: ask it again
[14:01] <MauL^> if my colleagues use x.bsg.local for microsoft exchange server, what should I write to OWA URL in the evolution ?
[14:02] <Promythyus> Problem with mysql-server-5.1: The recent update (5.1.41-3ubuntu12.3) caused apt-get upgrade to hang (left it for at least 24hrs). This caused mysql-server-5.1 to be corrupted, thus I had to remove with apt-get remove --purge. I have now reinstalled with apt-get install mysql-server-5.1, which seems to have gone fine EXCEPT that I cannot actually start the server, sudo start mysql hangs, and running start with the verbose
[14:02] <kbrosnan> wash: no, you would need SeaMonkey the community build of the Mozilla Suite
[14:02] <MauL^> it requires me to write http somewhere, I am confused
[14:02] <Snadder> tgywa, what line do you got in /etc/apt/sources.list ?
[14:02] <wpd> IRC firsttimer -- can anybody direct me at a resource for participating in #ubuntu IRC discussions.  I have connected via webchat (from my Windows PC at work -- can't install anything here) and even that took some figuring out.  Took a little while to figure out I was supposed to type "join #ubuntu" once it finished connecting and giving me all sorts of warnings about not liking proxy users.  Now I'm trying to figure out how to turn off t
[14:02] <wash> kbrosnan - really? seamonkey supports it?
[14:02] <bagua> ks3 will do that right now...
[14:02] <wash> I can honestly say I didn't expect that :P
[14:03] <kbrosnan> wash: seamonkey is a nntp clinet
[14:03] <sheikh> Can anyone tell me where is login  screen program (the screen where we type username and password to log into user session)  on ubuntu 8.10
[14:03] <simmerz> Promythyus: running start with verbose does what?
[14:04] <kbrosnan> wash: http://www.seamonkey-project.org/doc/2.0/img-screen/mailnews_overview.png
[14:04] <bagua> ks3  It shows "cron stop/waiting"  Interesting...  Wonder why on the first boot up it loaded and started  and the second it didn't or it stopped...
[14:04] <tgywa> Snadder, in sources.list, I have deb:cdrom:[Ubuntu-server 10.04 LTS ....
[14:05] <Promythyus> simmerz: sudo start -v mysql just hangs, the same as sudo start mysql. No output at all
[14:05] <Snadder> tgywa, and where is your mounting point?
[14:05] <lefantomedlopera> Hello I would like to creat a new directory by sudo mkdir and to set the owner to " lefantomedlopera " instead of " root"
[14:05] <lefantomedlopera> so what is the syntax?
[14:05] <wash> kbrosnan: thanks.
[14:05] <simmerz> Promythyus: have you tried to run mysqld directly?
[14:05] <wpd> sudo mkdir blah
[14:05] <tgywa> Snadder, /media/CD
[14:05] <ks3> bagua, Cron should log information to /var/log/syslog. That would be a good place to start looking.
[14:05] <LjL> lefantomedlopera: create it, then "sudo chown lefantomedlopera dirname"
[14:05] <indus> sheikh, its in system > admin > login window
[14:06] <Soyo> LjL http://pastebin.com/aVmKiYhc I uncommented line 80 and still got the same result
[14:06] <wpd> sudo chown lefantmedlopera blah
[14:06] <lefantomedlopera> because when I make sudo pcmanfm and rename the owner, the operation is forbiden
[14:06] <simmerz> Promythyus: I have to head off now, but that's where I'd look, as well as in the mysql log
[14:06] <lefantomedlopera> thanks LjL I will try
[14:06] <sheikh> sudo chown lefantomedlopera directoryname
[14:06] <tgywa> Snadder, should the mount point be mentioned in sources.list?
[14:06] <Promythyus> simmerz: Thanks, I'll check through the log. launching mysqld does nothing, it doesn't appear in ps aux
[14:06] <LjL> Soyo: ehm, i didn't want you to uncomment line 80, but to comment line 78
[14:06] <bagua> ks3 thanks been in there.  Didn't see anything first pass.  Will look again (more closely) and get back to ya.  Thank you!
[14:07] <sergi> Hello
[14:07] <bagua> ks3 Nice catch on the cron stop/waiting thing... Thanks...
[14:07] <Snadder> tgywa, what happens when you do: apt-get update ?
[14:07] <lefantomedlopera> thank you LjL , sheikh
[14:07] <sergi> can anyone tell me how I can switch the speakers off whilst I put earphones on my HP_
[14:08] <sheikh> no problem
[14:08] <sergi> ?
[14:08] <Soyo> LjL ah, makes more sense.
[14:08] <sheikh> Can anyone tell me where is login  screen program (the screen where we type username and password to log into user session)  on ubuntu 8.10
[14:08] <tgywa> just went well .... no error messages ... couple of lines starting with Ign cdrom://
[14:08] <Pici> sheikh: Its called gdm, but 8.10 is no longer supported (as of April 30th 2010), we highly suggest that you upgrade to a more current version.
[14:09] <tgywa> Snadder, just went well .... no error messages ... couple of lines starting with Ign cdrom://
[14:09] <h00k> FunnyLookinHat: IMPOSTOR
[14:09] <phretor> hi, I have several //bin/dbus-daemon instances open for every user. Why?
[14:09] <h00k> FunnyLookinHat: ...I'm extremely sorry. This is the wrong channel.
[14:10] <sheikh> I have 9.10 on my vmware machine aswell my main purpose is to start my app at login screen
[14:10] <Snadder> tgywa, then the cdrom is ignored.. Try apt-cdrom add
[14:10] <OHAiTHARU> Hello, after i try to boot ubuntu (singleboot), and select my GRUB version, my screen goes blank (with a cursor at the top) and after a couple of seconds my moniter becomes unresponsive. (I'm on 10.04)
[14:10] <Soyo> LjL same :(
[14:10] <Snadder> tgywa, then apt-get update
[14:10] <JenniferB> Hi folks, I can't get this command to work for me: sudo add-apt-repository ppa:ferramroberto/extra && sudo apt-get update
[14:10] <JenniferB> Hi folks, I can't get this command to work for me: sudo add-apt-repository ppa:ferramroberto/extra && sudo apt-get update
[14:11] <tgywa> Snadder, I did already ... apt-cdrom add -d /media/CD/
[14:11] <JenniferB> i get a command not found
[14:11] <tgywa> Snadder, am doing it again
[14:11] <Snadder> tgywa, I have no clue... Maybe someone else knows?
[14:12] <Lazydude> jen did you try adding it from synaptic package manager instead
[14:12] <JenniferB> how do I do that? it's a ppa
[14:12] <JenniferB> and I can't get an ok
[14:12] <gothenburg> lol Canonical erases aptitude?
[14:12] <gothenburg> idiots!
[14:13] <mechdave> JenniferB: it should be apt-get repository
[14:13] <Galerien> gothenburg: wtf?
[14:13] <mechdave> JenniferB: without the hyphen between get and repository
[14:13] <gothenburg> Galerien: http://www.webupd8.org/2010/06/aptitude-removed-from-ubuntu-1010.html
[14:13] <tgywa> Snadder, I run apt-cdrom add -d /media/CD/
[14:13] <ben__> just installed Karmic Koala, says no internet connection, easy how-to?
[14:14] <Galerien> gothenburg: thanks
[14:14] <Pici> mechdave, JenniferB: no. It shouldn't.  Older versions of ubuntu used apt-add-repository, not add-apt-repository, try that instead.
[14:14] <fqh> Hi, on my laptop, Fn+F2 can black the screen. Is it turn off the black light, or only let it show black color?
[14:14] <tgywa> Snadder, and got a message which says ... Skipping non existent file /media/apt/dist...
[14:14] <sheikh> hello is there a way to start a GUI app( an application that has access to xwindows) at login screen (there one where we type username and password) on ubuntu 9.04
[14:14] <sheikh> ?
[14:14] <Promythyus> ben__: sudo ifconfig
[14:14] <erUSUL> sheikh: no
[14:14] <sheikh> hello is there a way to start a GUI app( an application that has access to xwindows) at login screen (the one where we type username and password) on ubuntu 9.04
[14:15] <sheikh> why is it because there is no xsession?
[14:15] <MrJones> I have an issue with an .so file compiled on fedora 12 that loads perfectly fine on fedora 12, whereas on ubuntu I get: dlerror() for "/usr/local/var/weircd/modules/weircdservices.so": /usr/local/var/weircd/modules/weircdservices.so: ELF file OS ABI invalid
[14:15] <Galerien> gothenburg: well... arf
[14:15] <MrJones> I did an md5sum check with the same result, so it's not corrupted or something
[14:15] <MrJones> it just won't load through dlopen() and throw that error :/
[14:15] <ben__> Promythus:  done
[14:16] <Promythyus> ben__: What was the output? (Pastebin it)
[14:16] <ben__> shucks 2 different computers can I PM you?
[14:16] <JenniferB> Pici: no working either
[14:16] <Soyo> LjL I needed to do sudo do-release-upgrade --proposed for server that's why :)
[14:16] <Promythyus> ben__: go for it
[14:16] <sheikh> hello is there a way to start a GUI app( an application that has access to xwindows) at login screen (the one where we type username and password) on ubuntu 9.04?
[14:16] <Pici> JenniferB: What version of Ubuntu are you using?
[14:17] <Pici> sheikh: You already got an answer to that question.
[14:17] <sheikh> can daemon run such an app?
[14:17] <JenniferB> Pici: how can I check ?
[14:17] <sheikh> at login screen?
[14:17] <Pici> JenniferB: in a terminal: lsb_release -a
[14:18] <JenniferB> 8.04
[14:18] <mattgyver> After generating a public SSH key and installing it I am still not asked to enter a passphrase, any ideas?
[14:18] <Galerien> JenniferB: This one is old...
[14:18] <Pici> JenniferB: That is not a command that existed on 8.04, you'll need to add that ppa to your sources.list manually.
[14:19] <Pici> JenniferB: Do you know how to do that?
[14:19] <jundre> kdk a
[14:19] <jundre> hello
[14:19] <sheikh> can i tell my gdm to start an addition program with login screen?
[14:19] <sheikh> if i am root
[14:20] <OHAiTHARU> Hello, after i try to boot ubuntu (singleboot), and select my GRUB version, my screen goes blank (with a cursor at the top) and after a couple of seconds my moniter becomes unresponsive. (I'm on 10.04)
[14:20] <Galerien> JenniferB: there are some automatique source generator, you can find one easily on google, and you won't have any deposit problem anymore....
[14:21] <wpd> How can I turn off the joined/quit/timeout messages in IRC?  (I am using webchat)
[14:21] <Galerien> wpd: that'as a good question :D I "+1" this one
[14:22] <wpd> mode/#ubuntu -j
[14:22] <wpd> Oops, sorry 'bout that.
[14:22] <gothenburg>  -j ?
[14:22] <j0elbyte> Does anyone know if theres any workaround for plymouth's resolution issue in combination with the proprietary nvidia-driver?
[14:22] <Galerien> wpd: that's for operator
[14:23] <Lazydude> i know joelbyte
[14:23] <phretor> how do I get the list of locked files?
[14:23] <Fujk> i run ipkg update: ipkg_download: ERROR: Failed to retrieve http://downloads.openwrt.org/whiterussian/packages/Packages, returning
[14:23] <Lazydude> j0elbyte http://news.softpedia.com/news/How-to-Fix-the-Big-and-Ugly-Plymouth-Logo-in-Ubuntu-10-04-140810.shtml
[14:24] <wpd> Galerien: what do you mean "that's for operator"?
[14:25] <Galerien> wpd: /mode #chan is for channel operator
[14:25] <Pici> Fujk: This channel is for Ubuntu support only.  I suggest you try an openwrt support channel.
[14:25] <tgywa> How can I installed .gz file using apt and from cdrom?
[14:26] <ks3> phretor, lsof will show all open files, and part of the display should indicate lock status
[14:26] <j0elbyte> Lazydude: thanks, just what i was looking for
[14:26] <Lazydude> your welcome
[14:26] <wpd> Galerien: Thanks... I'm a complete IRC newbie... can you recommend a resource that will explain things like "/mode" and "channel operator"?
[14:27] <Galerien> wpd: nop sorry :D, I just know a few of them...
[14:27] <OHAiTHARU> wpd: http://docs.dal.net/docs/modes.html
[14:27] <Galerien> wpd: but google is your friend (well, in that case at last)
[14:28] <Pici> !modes | wpd Galerien OHAiTHARU
[14:28] <Pici> Further discussion of IRC should be in #ubuntu-offtopic or questions in #freenode
[14:30] <qgel> how can i make an application default for a specific file type? if i do it in the "Open with other application" dialog it doesnt work...
[14:31] <kermit-the-frog_> qgel did you try file properties?
[14:32] <SmokeyD> hey everyone. i am trying to unmount a share, but klauncher keeps it busy. If i kill klauncher, it automatically relaunches itself and keeps the share busy again
[14:32] <qgel> kermit-the-frog_ ah thanks a lot, that works
[14:32] <SmokeyD> how can I unmount the share?
[14:32] <SmokeyD> it is a cifs share in my home directory
[14:34] <kermit-the-frog_> man umount ?
[14:35] <Snadder> Hi.. I installed ubuntu 10.04 with grub2 (previously had debian lenny with grub1).. Now I booted to a grub 15 error.. Anyone know how to fix it?
[14:35] <SmokeyD> kermit-the-frog_: yeah, I know unmount, but klauncher has it occupied
[14:35] <Galerien> SmokeyD: if you want to be sure : sudo umount -a
[14:35] <SmokeyD> kermit-the-frog_: what is it doing there in the first place? How can I stop klauncher from doing what it is doing on the share so i can unmount it normally
[14:36] <Zenith77> Snadder: do you have a live CD?
[14:36] <SmokeyD> Galerien: umount -a unmounts all shares..... that is not what I want
[14:36] <Zenith77> If so could you post (not in the IRC channel) from boot/grub/grub.conf
[14:37] <Snadder> Zenith77, DO I need that?.. I have a ubuntu 10.04 server cd.
[14:37] <SmokeyD> I just have one cifs share mounted. I want to unmount it, but when I do it, umount complains it is busy. When I check why, it turns out klauncher is using it.
[14:37] <Munsking> is it possible to disable the desktop for a user? we have a small bed and breakfast and i want to use a laptop with ubuntu 10.04 for the guests, but it should only show firefox and disable the rest, so they cant mess things up
[14:38] <queso> After upgrading from jaunty -> karmic -> lucid, a bunch of my menu items lost their icons.  is there an easy way to have those regenerated?
[14:38] <Zenith77> Snadder: most installation CD's will act like a live cd
[14:38] <Zenith77> Snadder: unless you customized it in some way, so just boot from that
[14:39] <Snadder> Zenith77, okok.. How do I correct it after I boot from it?
[14:39] <engywook> Hi! Updated 10.04 LTS after not for couple weeks. Now network weirdness. Router had been config'd to serve specific IP based on MAC address. After update, eth0 (owner of MAC) not happening but eth1 with wacky MAC address connected. After trying several things, gave up and set eth1 to static IP and removed config from router. That was fine last night. This morning, eth1 is gone, eth0 is back (with random IP), and pulling up System | Preferen
[14:39] <HowdyDoody> In middle of upgrade to 0.04 my keyboard stopped keying.    After a bunch of key banging the Ctrl-Alt-Del key starts to work suddenly.  BAH now I've rebooted and it seems to be hung at ubuntu with the 5 dots.   How to recover ?    ---> I tried:  trl-alt-F1 login and sudo do-release-upgrade......    I got: checking for new ubuntu release  .....    no release found   > What can I try next  to get the upgrade back on track ?
[14:40] <Zenith77> Snadder: well, AFAIK, error 15 is a file not found error. It may be something in grub.conf or another grub configuration file
[14:40] <Zenith77> or even grub.conf itself >.>
[14:41] <Snadder> Zenith77, I think I saw this error as a common thing with ubuntu 10.04.. in a FAQ.
[14:41] <Zenith77> Snadder: I'd look over it myself and post it to pastebin and post it here so anyone can take a gander at it and spot something out of place in the configuration file
[14:41] <Snadder> Zenith77, its a plain default grub.conf..
[14:41] <Zenith77> Snadder: link?
[14:41] <kermit-the-frog_> Hey, using a Maxdata laptop (ECO4045I) with Ubuntu 9.10. Pausemode is automatically activated when the powercord is unplugged. After that the laptop can't awaken from pausemode and requires a hard reset. Is there a fix?
[14:42] <Snadder> Zenith77, https://help.ubuntu.com/community/Grub2#File%20Not%20Found%20%28Error%2015%29
[14:42] <Zenith77> sn0wflake: http://ubuntuforums.org/showthread.php?t=297261
[14:42] <Zenith77> err
[14:42] <Zenith77> Snadder: http://ubuntuforums.org/showthread.php?t=297261
[14:43] <Zenith77> There's some solutions there it seems
[14:43] <Zenith77> Snadder: the solution says to reinstall from a live CD :) https://help.ubuntu.com/community/Grub2#Reinstalling%20from%20LiveCD
[14:44] <lirakis> Does any one run Ubuntu on a Dell Studio 17 laptop ?
[14:45] <SailorReality> are there any operating systems that are considered better than linux?
[14:45] <Pici> !ot | SailorReality
[14:45] <bazhang> SailorReality, please discuss in #ubuntu-offtopic
[14:45] <lirakis> ive done some searching on the forums - it seems like a mixed bag as far as compatibility goes, but a lot of the posts are a year old
[14:45] <SailorReality> ok
[14:45] <bazhang> lirakis, have a question related to such? please clarify
[14:45] <lirakis> im curious whether any one has a late model 1749
[14:45] <MrJones> does someone know how I can make a fedora 12 gcc output an .so format that ubuntu 8.04 can deal with (without outputting "ELF file OS ABI invalid" on dlopen)? fedora people won't help because this is apparently "fedora unrelated" >.>
[14:45] <lirakis> and if there are any issues
[14:46] <lirakis> with ubuntu on it
[14:46] <lirakis> especially 10.04
[14:46] <erUSUL> !best | SailorReality applies to Operating Systems too
[14:46] <bazhang> lirakis, does the live cd work?
[14:46] <lirakis> bazhang, i am asking because i am thinking about buying one
[14:46] <bazhang> lirakis, no way to troubleshoot without a computer in front of you
[14:46] <lirakis> bazhang, dude .. im not asking for troube shootin
[14:46] <bazhang> lirakis, perhaps check ubuntuforums
[14:47] <lirakis> bazhang, did you read my first post
[14:47] <lirakis> i said i already checked the forums
[14:47] <bazhang> lirakis, yes.
[14:47] <Maletor> How do I make the text in gnome-terminal expand when I resize the window?
[14:47] <sereal> Is there any reason why after upgrading from ubuntu 8 to 10, the window movement and window resizing key bindings in fluxbox don't work?
[14:48] <red2kic> Maletor: Make a new Terminal profile? With gigantic size.
[14:49] <Maletor> red2kic: It needs to be dynamic.
[14:49] <CkhiKuzad> every time i log into my command line screens (control alt f(1-6)) screen starts automatically, making it impossible to use screen correctly (the f9 menu wont work) how do i disable this auto starting of screen?
[14:49] <centerpoint> hello , I dont want sshd startup at system startup , but I cant find sshd at /etc/rc2.d . And sysv-rc-conf and bum show that sshd not auto start. how can I do ? thx
[14:49] <sereal> Maletor, do you want the font size bigger or the text just not to wrap to the next line and fill the entire width of the term?
[14:49] <Maletor> sereal: the latter
[14:50] <raket> :>, how do i change system language on my ubuntu-installation, it's currently swedish and very strange error-message etc are in swedish and very hard to understand :)
[14:50] <sereal> a ncurses interface will resize on it's own. But just stdout won't
[14:50]  * red2kic steal channel operator status from tsimpson
[14:51] <sereal> So your best bet after resizeing the term is to just type the command again
[14:51] <Maletor> so how do i get an ncurses interface?
[14:51] <sereal> Well ncurses interfaces are provided by programs
[14:51] <Maletor> stdout resizes on os x
[14:52] <sereal> There might be a refresh command to get the terminal to re print out everything
[14:52] <uLinux> How can I change hello
[14:52] <uLinux> lol
[14:53] <uLinux> How can I change login theme
[14:53] <easy-guy> which tool do i need to generate md5,sha1 etc password please?
[14:53] <raket> <:
[14:53]  * uLinux is watching everybody sleeping
[14:53] <geirha> easy-guy: in what context?
[14:55] <easy-guy> geirha, i need to generate hash password but which tool do i need?
[14:56] <profxavier> woke up and my Ubuntu machine in VMware had both eth0 and eth1, eth0 I had setup statically, but for some reason a new eth1 was created.  I removed eth1 and restarted, but I have no connection on it....
[14:56] <profxavier> how can I -repair- the static eth0 I had set ?
[14:56] <profxavier> maybe something else has the IP I set it statically? [and thats causing an issue]
[14:57] <geirha> easy-guy: But what do you need the hash for? Most programs that use some sort of authentication usually has their own commands to do it.
[14:57] <engywook> profxavier: Same thing happened to me. Waiting for an answer. This morning, eth1 was gone, but eth0 not showing up in Preferences.
[14:57] <profxavier> u have eth0 setup statically?
[14:57] <profxavier> maybe it was something in the last updates, I did an update yesterday...
[14:58] <easy-guy> geirha, that is not my issue, just i wanna know is there any tool for generate hash in ubuntu?
[14:59] <uLinux> GDM2Setup
[14:59] <engywook> profxavier: I had set eth0's MAC to receive DHCP address the same every time from my router, but with eth0 "vanished", that wasn't working. Eventually last night, I killed DHCP static and set eth1 as a static address. This morning, eth1 is gone, but eth0 is not in Preferences (neither is eth1). I updated last night, after about 2 weeks of not.
[14:59] <Propel> having issues installing mythTV :(
[14:59] <geirha> easy-guy: printf "%s" "foo" | openssl md5   (or sha1 instead of md5)
[14:59] <engywook> profxavier: Maybe I should ignore it and try setting my router to serve up the "static" address again to the undead eth0. :-)
[15:00] <Zenith77> Propel: what's the problem?
[15:01] <profxavier> engywook: I am trying a few things here
[15:01] <profxavier> just removed both eth0 and eth1
[15:01] <profxavier> and restarted
[15:01] <bogdan> #plone
[15:01] <chisel_> i need help to unhide the contents of a dvd. I've followed gobs of tutorials to no avail please help
[15:01] <engywook> brave
[15:01] <uLinux> I want to write something and convert it to voice ... like robot voice  how can I do this
[15:02] <profxavier> engywook: yep, that didnt work O_o
[15:02] <uLinux> what is the application
[15:02] <geirha> chisel_: sudo mount -t iso9660 /dev/cdrom /media/cdrom
[15:02] <Propel> Zenith77, I can't get it to recognize my tv tuner card :(
[15:02] <Propel> My TV Tuner card I believe is: ASUS PVR-416 TV/FM Tuner
[15:02] <Propel> I'm not sure because I bought this PC about a decade ago lol
[15:02] <chisel_> geirha, don't i need to unmount first?
[15:02] <Propel> but i'm pretty sure
[15:03] <geirha> chisel_: That's probably a good idea, yes :) sudo umount /dev/cdrom
[15:03] <MrWGW> can I have Pidgin notify me when someone messages by changing the color of its icon in the notificaitons area, like on other distros?
[15:03] <MrWGW> as opoosed to having those obnoxious libnotify baloons appear
[15:03] <MrWGW> which I realy hate
[15:03] <uLinux> Which application can I use to convert text to voice? tks
[15:04] <Pici> uLinux: festival or espeak
[15:04] <uLinux> tks
[15:04] <Zenith77> Propel: well you need to find out what it is first, for sure :)
[15:04] <Zenith77> and make sure the tv tuner is supported
[15:04] <Propel> lol, i'm pretty sure it's that :P
[15:04] <Zenith77> 100% sure?
[15:04] <Propel> I went to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&lang=en&cc=ec&os=228&product=367282&dlc=en&softwareitem=pv-20048-1
[15:05] <Propel> and that's the PC i Have
[15:05] <Propel> m370n
[15:05] <Propel> And the driver update is under that category
[15:06] <Propel> how strange... i could view one channel in VLC, but now I can't
[15:06] <profxavier> weird, I tried to setup eth0 again, and all I see is eth1 in ifconfig
[15:06] <profxavier> and no connection
[15:06] <Zenith77> Propel: do lspci and double check
[15:06] <Propel> how do i do that?
[15:07] <engywook> So, it's not just me!
[15:07] <Zenith77> Propel: open up terminal
[15:07] <Zenith77> and write "lspci"
[15:07] <chisel_> gierha: sudo mount -t iso9660 /dev/cdrom /media/cdrom0
[15:07] <chisel_> mount: no medium found on /dev/sr1
[15:07] <wizard__> I have Maverick questions.  Where do I go?
[15:07] <Propel> k
[15:08] <geirha> chisel_: Possibly the wrong device then. Do you have more than one cd/dvd drive?
[15:08] <wizard__> I have Maverick questions.  What's the #channel for Maverick?
[15:08] <psusi> wizard__: #ubuntu+1
[15:08] <DJones> wizard__: #ubuntu+1 for Maverick
[15:08] <tgywa> can't make ssh ... no firewall ... any idea .. where can I get log file?
[15:09] <wizard__> Thanks.
[15:09] <engywook> I want to try restoring the "static" DHCP assignment in my router (Airport Extreme), but that will likely knock me off the network for a couple minutes. Be back soon.
[15:09] <chisel_> geirha: yes, but as far as i can tell i told it to mount the right one. cdrom0 aka sr1
[15:09] <paco_> hola
[15:10] <paco_> aki pueden ayudarme con el reprodulctor de peliculas ?
[15:10] <geirha> chisel_: Try /dev/sr0 as well, just to be sure
[15:10] <Pici> !es | paco_
[15:11] <Propel> hmmm...
[15:11] <Propel> i can't find asus listed anywhere, Zenith77
[15:11] <Propel> :/
[15:11] <chisel_> geirha: i did a command earlier that told me that cdrom0=sr1 so no mistake
[15:11] <craigbass1976> The php that ships by default with lucid...  Is there something funky going on with sessions, like they're off?
[15:11] <Alphanaut> anyone know of any issues with the bittorrent client that comes by default in ubuntu 10.04?
[15:11] <Alphanaut> running for a few weeks now, fired that up, and within 5 minutes had a complete freeze
[15:11] <Zenith77> Propel: see :D. It IS a PCI tuner card right?
[15:11] <Alphanaut> had to hold down the power to reboot, which i've never had to do before in linux
[15:12] <Propel> I think so lol
[15:12] <Zenith77> Propel: and jsut in case you missed it do "lspci | grep Asus"
[15:12] <geirha> chisel_: Still, does sudo mount -t iso9660 /dev/sr0 /media/cdrom give the same error?
[15:12] <Zenith77> olspci | grep asus
[15:12] <Zenith77> as weel
[15:12] <Zenith77> lspci*
[15:13] <Propel> ok, i see lots of things lol
[15:13] <wizard__> I'm using indicator-applet-appmenu but it only works for VLC, and nothing else.  Is anyone else experienceing this, or is it just me?  No other apps, no matter which ones I try (Ive tried dozens) it only works for VLC.  Nobody is answering in #ubuntu+1
[15:13] <Propel> not exactly sure what i'm looking for
[15:13] <chisel_> mount: block device /dev/sr0 is write-protected, mounting read-only
[15:13] <chisel_> mount: wrong fs type, bad option, bad superblock on /dev/sr0,
[15:13] <chisel_>        missing codepage or helper program, or other error
[15:13] <chisel_>        In some cases useful info is found in syslog - try
[15:13] <chisel_>        dmesg | tail  or so
[15:13] <FloodBot4> chisel_: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[15:13] <Propel> nothing popping out as TV tuner
[15:14] <geirha> chisel_: So it detects a medium in /dev/sr0, but not /dev/sr1. What type of dvd is it exactly?
[15:15] <chisel_> its a game
[15:15] <geirha> chisel_: And it should contain an installer for both mac and windows, like WoW, right?
[15:16] <chisel_> geirha: yes, its wotlk, (wow)
[15:16] <Zenith77> Propel: can you past bin the entire result of lspci?
[15:16] <profxavier> ok, when the capables come around, I need help with setting up my network [wired] please
[15:16] <Zenith77> and post the URL in here
[15:17] <geirha> chisel_: Hm. that should've worked. I'm pretty sure I've done it that way with a previous version of wow at least.
[15:17] <Propel> of both lspci and lspci | greg asus?
[15:17] <Propel> or just one of them?
[15:17] <engywook> Back from network disconnect from restarting my router. Router is again serving up the desired IP address. Rebooted the Ubuntu system, which picked up the proper address. Everything is working again, but it leaves me nervous.
[15:18] <Propel> oh wait
[15:18] <Propel> I think I found it, Zenith77
[15:18] <Propel> Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
[15:18] <Propel> That's the one, right?
[15:18] <chisel_> geirha: dmesg | tail results in: ISOFS: Unable to identify cd-rom format.
[15:18] <profxavier> engywook so it was the router ?
[15:18] <geirha> chisel_: Ah, google suggests they've done it a bit differently now. Try:  sudo mount -o unhide /dev/sr0 /media/cdrom
[15:20] <chisel_> geirha: thanks for that, it appears to have worked. what is the source of that info plz?
[15:21] <geirha> chisel_: http://www.wowwiki.com/Wine
[15:21] <chisel_> geirha: thanks a bundle bud, next beer is on me!
[15:21] <engywook> No, there was definitely something wacky going on with the Ubuntu server, such that my former router config did not work last night. As part of my workaround, I killed the "static" DHCP serving from the router and set eth1 with the static IP address. This morning, eth1 is gone (again), and eth0 got a random IP. My System | Preferences | Network Connections this morning (still) did not show *any* network connections, so no way to tell eth0 t
[15:21] <engywook> static. Just now, I re-added the "static" DHCP config to my router, restarted the router, and rebooted Ubuntu.
[15:22] <sederick> Who can help with vpn-on-vpn connection on ubuntu 10.04?
[15:24] <Zenith77> Propel: looks like it
[15:24] <engywook> So, still not "fixed", because the Network Connections preferences aren't showing the eth0 connection, but it seems to be successfully doing DHCP and getting the IP address I told the router to give it.
[15:24] <Zenith77> not what you thought you had is it Propel :P
[15:24] <caac> hi, i wanna play a dvd but can't, got vlc installed and so on
[15:24] <erUSUL> !dvd | caac
[15:25] <erUSUL> caac: you need the dcss lib from medibuntu to view commercial dvd's
[15:25] <Zenith77> Propel: wait nevermind
[15:25] <caac> erUSUL, how do i get that?
[15:25] <Propel> hmmmm, so it's not? :/
[15:26] <Zenith77> Propel: you said you're using mythbuntu right?
[15:26] <profxavier> need help repairing my network, anyone -capable- available ? :D
[15:26] <FuzzyFox0> hey there, I am wondering if it is possible to print to all the printers on the local network at once. This would make the memos here at work a lot easier. Most computers here run linux
[15:26] <erUSUL> !medibuntu | caac
[15:26]  * FuzzyFox0 has tried the google
[15:26] <Propel> nah, i'm just using regular ubuntu
[15:26] <Propel> latest version
[15:26] <Propel> but i have mythtv installed
[15:26] <Izinucs> On a newly installed system 10.04.. when you right mouse click a folder and "share" it, the system automatically downloads and installs samba.  Looking at /etc/samba/smb.conf I see no changes to indicate the folder has been shared.. where are the changes being made?
[15:26] <Propel> trying to figure it out
[15:27] <Zenith77> Propel: try #ubuntu-mythtv
[15:27] <Zenith77> they'll be better able to help you with your problem
[15:27] <petsbath> Hi, I just set up a virtual host, but when I browse to it it just shows the Index of / [ICO]	Name	Last modified	Size	Description [TXT]	index.html	10-Jun-2010 21:38 	12 ,,,,, not the index file? do I have to set the documentindex?
[15:27] <Propel> ahhh thank you very much zenith
[15:27] <erUSUL> caac: after adding medibuntu as explained in the wiki just install this package libdvdcss2 (sudo aptitude install libdvdcss2 )
[15:28] <caac> erUSUL, doing https://help.ubuntu.com/community/Medibuntu#Adding the Repository atm
[15:28] <Propel> i'll be back in a bit. gonna grab a bite to eat and see if i still have a connection coming through my cable
[15:28] <Propel> not even showing up in vlc player right now
[15:29] <New2Ubuntu> Hi all
[15:30] <nimrod10> any good twitter client ? gwibber is not working anymore
[15:30] <craigbass1976> Anyone else had trouble with php sessions after the lucid upgrade?
[15:30] <caac> erUSUL, may i pm you?
[15:31] <FuzzyFox0> anyone got any ideas on how I can print to multiple network printers at once?
[15:32] <aswin> my system just hangs up.All the program hangs up and then everything closes leaving just the wallpaper and then i have to force restart my laptop
[15:32] <aswin> can any1 help me with this
[15:32] <Vroomfondle> FuzzyFox0: use lpd and a bash script?
[15:33] <mc__> my sound stopped working after a reboot  im on 10.04 , how can I find out whats the problem?
[15:33] <FuzzyFox0> Vroomfondle: how would I do that?
[15:33] <profxavier> engywook still around ?
[15:33] <Vroomfondle> hmm
[15:33] <Vroomfondle> !lpd
[15:33] <petsbath> Do you have to set the Document Index for a virtual host?
[15:33] <nimrod10> FuzzyFox0, if your printers are hp then install hplip toolbox
[15:33] <Zenith77> aswin: did you check if your laptop was supported?
[15:33] <nimrod10> petsbath, afaik just servername and documentroot
[15:34] <New2Ubuntu> how do I stop lucid from constantly asking me my password? for updates , installations, downloads etc i have typed my pw more than 200 times already just today
[15:34] <petsbath> whats afiak?
[15:34] <nimrod10> petsbath, afaik = as far as I know :)
[15:34] <Vroomfondle> FuzzyFox0: lp is the command-line command for printing. See "man lp". You could craft a multi-part command or a bash script to run lp multiple times.
[15:35] <Vroomfondle> though the specifics would depend upon exactly what you're trying to do
[15:35] <aswin> i think the problem is because of libnotify which i downloaded for thunderbird.Now when thunderbird shows up notification of new mails it hangs up
[15:35] <aswin> can some1 suggest nything
[15:36] <Galerien> New2Ubuntu: You can use your applications as root, but it's dangerous
[15:36] <craigbass1976> New2Ubuntu, that's kind of the idea; if you're about to do something that's going to potentially break your box, that's administrative and requires a password
[15:36] <Vroomfondle> aswin: reinstall the old libnotify using apt?
[15:36] <profxavier> engywook mine is repaired now, restarting the router helped here too
[15:36] <uLinux> Gespeaker + espeak
[15:37] <Galerien> !gksu | New2Ubuntu
[15:37] <drothli> hi, I have a little question, I am right now running ubuntu and would like to install ubuntu server onto a cf-card, do I really need to burn a cd or is there an installer to do this?
[15:37] <aswin> u mean i have to type sudo apt-get libnotify
[15:37] <craigbass1976> New2Ubuntu, otherwise, some knucklehead can come along when you go to lunch and break stuff willy-nilly.  It's also a reminder "Do I really want to do that?" that's handy sometimes
[15:37] <Vroomfondle> aswin: sudo dpkg-reconfigure libnotify-bin
[15:37] <craigbass1976> Anyone else had trouble with php sessions after the lucid upgrade?
[15:37] <Galerien> craigbass1976: nop
[15:37] <ChaosR> hello people, I'm using wget to mirror a site using timestamping, however after it find a really big file, which should not be downloaded (and it states it won't download it), it freezes up, and starts using massive amounts of memory (about 1.2GB worth), and then after a while, it resumes normal operation, with minimal ram usage, until it finds another really big file, and the thing happens all over again
[15:38] <craigbass1976> I'm at my wits end with some scripts that aren't working anymore
[15:38] <aswin> thanks vroomfondle
[15:38] <kreppnar> anyone here using a Belkin Basic USB wireless N150 adapter?
[15:38] <petsbath> can anybody tell me how to set the permissions to 775 for a directory using ssh?
[15:38] <ChaosR> so, anybody knows why and how to solve this?
[15:38] <aswin> i did that..hope it works
[15:38] <aanderson> I am having trouble installing ubuntu 10.04 with a 3ware 9750 raid controller. Once I get the install started and go to choose a file system nothing shows up and i receive the error no root file system found. I have setup the 3Ware controller according to their directions even setup the boot size to all 549GB. Does anyone have any suggestions for me
[15:38] <New2Ubuntu> I guess once I have set up my lucid as I like it I wont be typing the pw as much, problem just cause I am still getting to grips with my lucid and installing testing etc
[15:38] <aar> Hi, I'm having problems with pulseaudio after swtching from kde to gnome (ubuntu 10.04). I have no sound and I get the message "waiting for sound system to respond" when trying to access the sound preferences. I tried deleting the .pulseaudio directory but that gets regenerated straight away (and seems to make no difference).
[15:39] <Vroomfondle> aswin: good luck. If not try "sudo aptitude reinstall libnotify-bin" instead.
[15:39] <GigsWork> I'm trying to upgrade from 9.04 to 9.10, getting an error  --- Failed to fetch http://security.ubuntu.com/ubuntu/dists/karmic-security/main/binary-i386/Packages  404 Not Found --- I looked and Packages.gz is there on security.ubuntu.com but not Packages.  How do I tell apt to get Packages.gz instead of Packages?
[15:39] <kreppnar> aar: pulse is evil :p, i uninstalled it and just started using Alsa
[15:39] <ChaosR> btw, it only happens on http, not ftp
[15:39] <craigbass1976> New2Ubuntu, true; I only type a pass now for updates and in terminals when I'm dorking with system files
[15:40] <drothli> which is the best way to install ubuntu-server onto a cf-card (running ubuntu)?
[15:40] <New2Ubuntu> yah messed up lucid twice now had to reinstall used ms for 15 years
[15:40] <aar> kreppnar, I already have alsa installed. Is it just a simple case of "apt-get remove pulse"?
[15:41] <kreppnar> New2Ubuntu: haha when i was learning Linux, back with Mandrake 8, you wouldn't beleive how many times i had to re-install because i would get "curious"
[15:41] <kreppnar> aar: yeah its what i did, and then just use Kmix to control volume or alsamixer
[15:42] <New2Ubuntu> curious is good almost went back to ms but I have tasted and now there is now going back
[15:42] <aar> kreppnar, thx
[15:42] <kreppnar> aar: its just crazy how they have all these sound systems, and they all like to interrupt eachother..they just need to make 1 good one
[15:42] <New2Ubuntu> can somebody help me with aptana ?
[15:43] <GigsWork> kreppnar: people starting over to make "1 good one" is how we wound up with so many
[15:43] <aswin> i'm trying aircrack for the first time and it worked half way in backtrack in my atheros card..i heard sometimes u have to patch the driver..does ubuntu 10.04 support packet injection or do i have to patch ath9k
[15:43] <kreppnar> New2Ubuntu: haha i wont ever go back, Windows is epic fail. My first linux was "Win Linux" that ran in windows 98 :p
[15:44] <kreppnar> GigsWork: lol but how did they all end up in the repositories?? lol they could of just narrowed it down and voted for the best stable one
[15:44] <Izinucs> What does "shares-admin" modify?
[15:44] <kreppnar> New2Ubuntu: then after messing that up several times, i just knew i had to have it as my only OS
[15:45] <buppa_> Anyone know why ati drivers for Radeon HD 5770 doesnt work very well? The CPU usage is very high.
[15:45] <GigsWork> kreppnar: well alsa is lower level, and has a pretty basic mixer functionality
[15:45] <meianandh> Anyone know how to turn on - Wireless hardware in Ubuntu ...
[15:45] <kreppnar> Gigswork: but i find it to work the best. :)
[15:46] <GigsWork> kreppnar: that left room for a more advanced mixer system like pulse.... the main reason there's so many though is because applications need to be rewritten to use different ones
[15:46] <GigsWork> so as long as people use older apps the older sound systems stay around
[15:46] <kreppnar> buppa_: Never tried an ATI, but for linux i hear they dont have the greatest support when it comes to drivers. nvidia is a good one to look into
[15:46] <aswin> my third problem..wifi in my laptop is turned on automatically once i start ubuntu without using the slider in laptop..how to disable this?
[15:46] <aranwe> hi i cant copy my ubuntu9.10 files via 10.04 live cd, says no permission anybody can help pls?
[15:46] <rru> i've got a font problem. at home my dejavu font displays properly, but in my new workstation the font is fucked up. it's not xft but x11 font system and it's recognized and found, but displays all fucked up.
[15:47] <h00k> !language | rru
[15:47] <rru> sry.
[15:47] <kreppnar> GigsWork: and who thought of that stupid jack sound server? that thing makes me mad how you have to shut off your sound system to run it, separately for a program to work
[15:47] <aranwe> hi i cant copy my ubuntu9.10 files via 10.04 live cd, says no permission anybody can help pls?
[15:47] <kreppnar> rru: pretty sad when they control vocabulary :P
[15:47] <ikonia> aranwe: set the permissions correctly
[15:48] <rru> kreppnar: tru dat!
[15:48] <monokrome> I have a 4GB USB stick, and an ISO made for 4GB USB sticks... The ISO is 3.9GB but Startup Disc Creator thinks it's only 3.7GB. How can I fix this?
[15:48] <aswin> wifi in my laptop is turned on automatically once i start ubuntu without using the slider in laptop..how to disable this?
[15:48] <aranwe> ikonia, little help pls
[15:48] <ikonia> aranwe: in what respect ?
[15:48] <rru> kreppnar: bye bye goes freedom of speech.
[15:48] <GigsWork> kreppnar: hehe, well jack was a good concept at least
[15:48] <kreppnar> rru: a word is only offensive if someone lets it be :P .. as for me..nothing bothers me
[15:48] <New2Ubuntu> kreppnar sorry to ask such a stupid question but how do you reply? if you answer me its in red and has my name infront?
[15:48] <ikonia> rru: kreppnar there are rules of the channel - that include language, abide by them, or don't use the channel. Discussion ends
[15:48] <tinktank> hi all
[15:49] <aranwe> hi i cant copy my ubuntu9.10 files via 10.04 live cd, says no permission anybody can help pls?
[15:49] <kreppnar> fail
[15:49] <rru> ikonia: chill.
[15:49] <ikonia> aranwe: ok, so check the permissions
[15:49] <kreppnar> New2Ubuntu: you add my name in the reply
[15:49] <ikonia> rru: no, accept the rules, or don't use the channel, there is no more discussion on it
[15:49] <ikonia> aranwe: that's the first thing to look at
[15:49] <kiamo> how do I enable different language inputs for any program?
[15:49] <New2Ubuntu> kreppnar: cool like this
[15:49] <kreppnar> New2Ubuntu: there yah go :)
[15:49] <aswin> .wifi in my laptop is turned on automatically once i start ubuntu without using the slider in laptop..how to disable this?
[15:50] <aranwe> i cant do anything, i try with terminal; sudo su and nautilus and yet cant copy
[15:50] <kreppnar> Gigswork: haha yeah i never understood all the switching plugs and stuff for Jack..and i dont think i want to spend time learning :p
[15:50] <rru> ikonia: hey, i get it. i'm accepting. i was the first time. *sigh*
[15:50] <Guest55592> could someone help to me? (spanish if possible or english) I have a problem with my keyboard light
[15:50] <rru> anyone got any tips for the font problem?
[15:50] <ikonia> rru: then stop moaning about it *sigh*
[15:50] <aranwe> ikonia i cant do anything, i try with terminal; sudo su and nautilus and yet cant copy
[15:51] <Guest55592> keyboard problem :S
[15:51] <ikonia> aranwe: a.) sudo su - is not good. Sudo -i will get you a root shell b.) gksudo nautlius will launch nautlius as a root user, thats two things to be aware of
[15:51] <Guest55592> could anyone help me?
[15:51] <New2Ubuntu> kreppnar: is there like a system checker for lucid? like registry tools for windows
[15:51] <monokrome> or is there a way in Ubuntu to create a virtual device so I can install the OS here instead?
[15:51] <rcsheets> ikonia: could you explain "not good"?
[15:52] <ikonia> !virtua | monokrome
[15:52] <Guest55592> eduardoboss hablas español?
[15:52] <Pici> !es | Guest55592
[15:52] <ikonia> rcsheets: not the ubuntu supported way, can cause issues with the authentication setup in ubuntu
[15:52] <eduardoboss> Guest15140, poquito
[15:52] <aranwe> ikonia so how can i change permissions?
[15:52] <kreppnar> New2Ubuntu: Ubuntu doesn't really have a registry, but its just more like a file library cache. Just tells where and what everything is installed
[15:52] <New2Ubuntu> who uses aptana for web development
[15:52] <monokrome> !virtual | monokrome
[15:52] <eduardoboss> ops Guest55592
[15:52] <eduardoboss> pokito!
[15:52] <ikonia> aranwe: if you're running nautlius as root - you shouldn't need to
[15:52] <New2Ubuntu> krppnar: so if I mess up it fresh install/
[15:53] <kreppnar> New2Ubuntu: theres always ways of fixing something
[15:53] <aranwe> ikonia, it says You do not have the permissions necessary to view the contents of "antika".
[15:53] <ikonia> eduardoboss: why are you trying to call the ops ?
[15:53] <monokrome> ikonia: I already have VMWare, but that's not what I asked.
[15:53] <ikonia> aranwe: ok, so look at the permissons on that drve, what are they
[15:53] <kreppnar> epic fail
[15:53] <ikonia> monokrome: then what are you asking ?
[15:53] <monokrome> ikonia: How to create a virtual drive out of an ISO
[15:54] <ikonia> monokrome: ooh, I see, then you just mount it as a loopback device, (-o loop) should do it
[15:54] <monokrome> ikonia: I can't just mount -o loop because it's bootable, and I need it to be bootable (weird, I know)
[15:54] <aranwe> ikonia it says u are not the owner u cant change these permissions
[15:54] <ikonia> aranwe: that's not what I asked. I asked what the permissions on that file system where
[15:55] <aranwe> ikonia, how can i look?
[15:55] <sci> aranwe: become root and you can do anything you want
[15:55] <ikonia> aranwe: right click on it in nautlius and look at the permissions tab, or ls -la from the terminal
[15:55] <aranwe> sci, i am root
[15:55] <tinktank> hi all
[15:55] <aranwe> it says owner 1000
[15:56] <clayg> what is a good/easy-to-use ipod program? Something that allows you to find podcasts not just load them
[15:56] <sci> oops, that's a good one
[15:56] <clayg> er i mean podcast program
[15:56] <ikonia> aranwe: if you use a root nautlius shell you should be able to copy and paste between the two file systems
[15:57] <aranwe> ikonia, can u give me chmod commands?
[15:58] <slav> any1 know how to remove all gnome panels?
[15:58] <zeld> hi all i've a proble with gdb
[15:58] <ikonia> aranwe: it's easier to just open it up fully if you don't need that install any more. sudo chmod -R 777 file system
[15:58] <kreppnar> slav: temporarily?
[15:58] <delac> aranwe:  have you tried restarting your live-cd session?
[15:58] <delac> aranwe: cause that might correct the problem
[15:58] <aranwe> delac, yep
[15:58] <zeld> when i try to debug a program it say to me http://dpaste.com/206140/
[15:59] <delac> aranwe: hmm. I had this same problem once.
[15:59] <kreppnar> slav: right click on them, and go to panel settings
[15:59] <slav> kreppnar: no, tha after reboot did not showed
[15:59] <aranwe> ty 777 works
[15:59] <kreppnar> slav: oh so they dissapeared?
[15:59] <aranwe> delac, 777 works ty ikonia...
[15:59] <delac> aranwe: but I didnt really need to move any files, so I did nothin to it
[16:00] <zeld> i've to link pthread :|
[16:00] <slav> kreppnar: no, after reboot there still there
[16:00] <ubutom> clayg, miro maybe
[16:00] <kreppnar> slav: you logged out properly right?
[16:01] <Guest55592> Could any one help me with a keyboard problem?
[16:01] <kreppnar> slav: it should save your settings if you log out
[16:01] <sci> Guest55592: all is not lost, what's your problem ?
[16:02] <slav> kreppnar: ok, i'll check it, tyvm :)
[16:02] <delac> how to remove entries like "Set Up Broadcast..." from messaging menu (the little envelope)?
[16:03] <sci> i don't believe this
[16:05] <ks3> delac, The files are in /usr/share/indicators
[16:05] <delac> ks3: yes, nut I was hoping for something more user friendly
[16:05] <GigsWork> I'm still stuck on the apt problem upgrading to karmic.  For some reason it's trying to fetch the Packages file without the .gz extension: Failed to fetch http://security.ubuntu.com/ubuntu/dists/karmic-security/restricted/source/Sources  404 Not Found
[16:05] <jackuzzy> hy everyone
[16:06] <Mrcheesenips> I have accidently uninstalled the Gnome Network Manager and I am not connected to the internet but I have an ethernet cable plugged in, how can I connect to the internet to install the Gnome Network Manager?
[16:06] <rad4Christ> Hey guys in 10.04, ltsp-manager comes up blank when running with ltsp-server-standalone installed.
[16:06] <jackuzzy> can anybody tell me how do y use chmod?
[16:06] <rad4Christ> Any help?
[16:06] <Dr_Willis> Mrcheesenips:  you could try running the dhclient from a terminal. It may grab an ip/dns info from your dhcpserver
[16:07] <Mrcheesenips> ah I'll try
[16:07] <bazhang> Mrcheesenips, ifconfig and if you see eth0 then sudo dhclient eth0
[16:07] <Dr_Willis> !permissions | jackuzzy
[16:07] <Mrcheesenips> thank you
[16:07] <Dr_Willis> !manual | jackuzzy
[16:07] <Mrcheesenips> ill try
[16:07] <Mrcheesenips> it worked :D
[16:07] <Mrcheesenips> that was easy
[16:08] <zeld> byez
[16:08] <ActionParsnip> yo yo yo
[16:08] <LucidGuy> I have a lucid box that I can easily sftp into via filezilla .. yet via sftp command I get a huge delay to connect.. then it wont accept my password.  Can anyone think of what the difference is between the two?
[16:08] <jackuzzy> !manual
[16:08] <tinktank> hi, could anybody help me with my wubi install of ubuntu?
[16:09] <ActionParsnip> tinktank: can you give details please
[16:12] <stirz> Hey
[16:14] <tinktank> ActionParsnip: sorry. I've installed 10.04 via wubi, is there any way to set it to boot to ubuntu by default? or better yet, get rid of/uninstall windows?
[16:14] <Dr_Willis> tinktank:  if you wanted to do that. You shouldent of done a wubi install.
[16:14] <halfling> Can I get rid of openjdk and use sun-java6-jdk instead
[16:15] <tinktank> Dr_Willis: the computer i'm using doesnt have a CD/DVD drive, and can't boot from USB
[16:15] <tinktank> it's the only way
[16:15] <ActionParsnip> tinktank: wubi is installed in the windows file system. I believe there is a how to transfer to a true install but i've heard its painful. I suggest you make sure your backups ar sufficient and do a clean install
[16:15] <Dr_Willis> tinktank:  ive seen guides on converting a wubi install to a 'normal' install - but no idea how well they work
[16:15] <ActionParsnip> tinktank: if you make sure your backup scope includes a lot of the files in $HOME then it will transfer the configs
[16:15] <Alchimista> hi there, i've installed ubuntu 10.04 on my laptop, but has no internal sound, must conect to externals
[16:15] <Dr_Willis> tinktank:  you could move the hd to some other box. or track down a cd drive.   Or try a netboot.
[16:16] <tqllh> hi
[16:16] <tar-> my headset isn't working with ubuntu 10.04 (or 9.10) - it's a mini-jack headset and i'm using alsa.. anyone with experience regarding this?
[16:16] <jackuzzy> can anyone tell me if the uplink.thruhere.net on port 22 is online? if someone have putty or another client to connect to ssh
[16:16] <tqllh> who is that?
[16:16] <halfling> Can I get rid of openjdk and use sun-java6-jdk instead without causing problems?
[16:18] <tar-> jackuzzy: it's not open on port 22
[16:18] <bagua> ks3 you still out there?  Been researching the cron thing and it looks like an upstart issue
[16:18] <ubuntu> hi, ubuntu takes 10 minutes to boot up. how can i find out the cause?
[16:18] <tar-> halfling: yes
[16:18] <bagua> like they are having here:  http://art.ubuntuforums.org/showthread.php?t=1479423&highlight=upstart+lucid
[16:19] <bagua> looks like cron points to upstart after upgrade to Lucid...
[16:19] <administrator> ni
[16:19] <halfling> tar- there is a package in synaptic package manager called default-jdk and the description says it points to the java run time, is this important
[16:20] <tar-> halfling: no :)
[16:20] <regeya> good question, ubuntu.  my machine at home takes about 30 seconds to start up but it's a core 2 duo.  is it waiting for...dang.  waiting for dhcp.  that's what I was going to say to 'ubuntu.' but ubuntu is gone now.  I have a machine at work that takes about that long but it's a 400MHz G4 PPC running Debian and has about 8 large ReiserFS volumes.
[16:20] <halfling> Sweet. Thanks tar-
[16:20] <tar-> halfling: i substituded openjdk for sun-version a couple of months ago, no problems yet
[16:20] <regeya> I guess by modern standards dividing 1.5Tb up about 6 ways doesn't qualify as "large"
[16:20] <ks3> bagua, Interesting. So upstart isn't consistently starting cron on boot?
[16:21] <regeya> 'twas large when I first did it ;-)
[16:22] <bagua> Apparently not.  Interesting thing is that I used the same script on my laptop with Lucid there too and no problems
[16:22] <{g}> Hey People! What do you use to watch tv under ubuntu?
[16:22] <{g}> Does mplayer support it?
[16:22] <yves10> magic_ninja yo
[16:22] <bagua> Cron and script work fine on laptop Lucid not Desktop Lucid.  Something different...
[16:22] <bazhang> !tv | {g}
[16:23] <jackuzzy> Kafeine is what you searching for
[16:23] <bagua> I don't know anything about Upstart but I guess I am going to learn...
[16:23] <wessel> where can I set the "mouse scroll wheel speed" : "the number of lines it scrolls" ?
[16:23] <alexander_> hy guys
[16:24] <wessel> I can't find this is mouse settings, only shows pointer speed options
[16:24] <alexander_> I need a help about comand lines
[16:25] <{g}> jackuzzy: kafeine seems to be kde. wouldnt a gnome app make more sense?
[16:25] <alexander_> if I have many programs like /usr/bin/ruby1.8 /usr/bin/ruby1.8
[16:25] <alexander_> and /usr/bin/ruby
[16:25] <alexander_> and /usr/bin/ruby1.9
[16:25] <eric_> helloo ubuntu chat
[16:25] <alexander_> how can I call ruby1.9 typing ruby in comand line?
[16:25] <user766> SEE:http://www.ibm.com/developerworks/linux/library/l-linux-memory.html
[16:26] <paul__> cc
[16:26] <florence> sa va ???
[16:26] <paul__> oui et toi
[16:27] <Pici> !fr | paul__ florence
[16:27] <Galerien> popop les gars, c'est englais ici
[16:27] <Galerien> -e +a
[16:28] <kreppnar> anyone here have the Sound Blaster XF-I platinum?
[16:28] <eric_> im trying to make a launcher to execute "sudo vim /etc/hosts" but it doesn't do anything
[16:28] <eric_> any idea why?
[16:28] <bagua> ks3  Also.  Last night Cron didn't work.  Gave up after a 17 hour day...  This morning first reboot.  Surprise!  Cron worked.  Second shutdown and boot did not work...
[16:29] <mattgyver> After creating and installing an RSA key for SSH I still continue to recieve 'enter password' and not 'enter passphrase' any ideas?
[16:29] <tar-> kreppnar: yes, i have that one
[16:29] <tar-> .. I think
[16:29] <kreppnar> tar-: you have the docking bay, that has the extra plugins ?
[16:30] <Alchimista> anyone? I'de like some help configurating the sound on my lap
[16:30] <tar-> kreppnar: docking-bay? dunno, have lots of plugin-stuff - but no "docking-bay"
[16:30] <tar-> what do you dock in that bay?
[16:31] <kreppnar> tar- : its the extension that sits in the cdrom slots on your case, has all the cords for midi, rca, 1/4 plugs, and fiber
[16:31] <irdutfie> j #moonlight
[16:32] <eric_> why doesnt "sudo vim /etc/hosts" work ina launcher
[16:32] <Guest85345> !list
[16:32] <tar-> kreppnar: ah.. that i do have
[16:33] <Dr_Willis> eric_:  because sudo wont pop up a gui for the password. use gksudo
[16:33] <kreppnar> tar-: ever gotten those extra plugins to work in ubuntu?
[16:33] <Dr_Willis> eric_:  and use an  editor that has a X gui   or else launch it in a 'terminal'
[16:33] <kreppnar> tar-: i know they made a driver, but i know they just left that whole idea out of the situation.
[16:33] <kreppnar> tar-: pretty sad
[16:33] <ttt--> hi, my computer is slow and it says processor 100 percent in use, yet the 'system monitor' app doesnt show the offending process. any ideas, please?
[16:33] <tar-> kreppnar: yup, but I also have a surround-system which i couldn't find a way to work simultaneously
[16:34] <eric_> k let me try
[16:34] <bagua> ks3  I get the same thing as the other guy who has the problem /etc/init.d/cron -> /lib/init/upstart-job
[16:34] <drothli> where do I configure the serial console in ubuntu /etc/inittab is no existing
[16:34] <Dr_Willis> drothli:  configure them to do what exactly?
[16:35] <tar-> kreppnar: I'm sure there's a way to configure everything to work together using profiles of some kind, but I tired of searching soon after finding a post explaining how to get my 5.1 up and running..
[16:35] <Dr_Willis> drothli:  the console ttys are launched from /etc/init/tty*.conf  you could use them for examples perhaps
[16:35] <im63KgWeight> ttt--: type 'top' in the terminal and find out with one using ur CPU,if possible,try to kill the process
[16:35] <drothli> Dr_Willis, thanks I will try
[16:35] <kreppnar> tar-: yeah i understand. Once, you get something working, you dont want to continue with it until a later time.
[16:36] <halfling> I just installed JDK1.6 and I want to modify my path but there is no /usr/java... All the net says there should be one
[16:36] <tar-> my thoughts exactly :)
[16:36] <ttt--> im63KgWeight, it doesnt show in top either
[16:36] <aswin> is there a way to format pendrives in linux..currently its not formatted and i want to format i=to NTFS but it aint showing up in ubuntu
[16:36] <GigsWork> I just ran wireshark and confirmed that apt-get is indeed requesting Packages and Sources files without the .gz extension which is leading to the 404: GET /ubuntu/dists/karmic-security/multiverse/source/Sources HTTP/1.1
[16:36] <chisel_> geirha: you still here? i ran into a snag
[16:36] <Dr_Willis> aswin:  partition it to make a ntfs partition, then use mkfs.ntfs  - or use gparted
[16:37] <Dr_Willis> aswin:  check that its seen with 'sudo fdisk -l'  If fdisk dosent even see it. well theres some deeper issues going on
[16:37] <NET||abuse> hmm, what panel applet does the volume control come from? Having to rebuild my gnome panel a bit after playing around too much ;)
[16:37] <aswin> i have connected the pendrive to my laptop but it is not even showing in explorer
[16:37] <Dr_Willis> aswin:  just because gnome dosent automount it - does not mean its not 'seen'
[16:37] <ttt--> top only lists firefox as a big cpu process (at 10 percent).. yet something is taking 100 percent and slowing down everything
[16:37] <im63KgWeight> ttt--: if not this,memory use up? some program use up ur memory?
[16:37] <geirha> chisel_: Whether I'm here or not depends on what the snag is ;P
[16:37] <Dr_Willis> eric_:  You are using a text editor that has an actual X gui?
[16:37] <aswin> early it used to showup but it is not
[16:38] <Dr_Willis> aswin:  check it via the terminal. Gnomes auto mount stuff can be flakey at times
[16:38] <aswin> how to do it in terminal
[16:38] <Dr_Willis> aswin:  check that its seen with 'sudo fdisk -l'
[16:38] <ttt--> hmm. now it stopped all of a sudden :/
[16:38] <ttt--> how odd
[16:39] <aswin> it showing the hard drives but not the pendrive
[16:39] <MauL^> my ubuntu volume is extremely low even at the highest level. how can I fix that
[16:39] <im63KgWeight> ttt--: that's fun. some times it happens to my machine as well.
[16:39] <aswin> the pendrive is currently not formated
[16:39] <halfling> I just installed JDK1.6 and I want to modify my path but there is no /usr/java... All the net says there should be one.. I can't find the jdk
[16:39] <chisel_> geirha: lol so all the files copied over to a folder i created on desktop, and i'm following the instructions found here...http://www.ehow.com/how_4717958_install-king-dvd-ultimate-linux.html. wine Installer.exe command fails with wine: cannot find L"Z:\\home\\chisel\\Desktop\\wowlk\\Installer.exe"
[16:40] <im63KgWeight> ttt--: especially when i visit some pages full with flash vidio
[16:40] <Dr_Willis> aswin:  fdisk shows disks. reguardless of if they are formated or not
[16:41] <geirha> chisel_: But the installer.exe file is there?
[16:41] <aswin> so wats the problem then..the pendrive is not there
[16:41] <Dr_Willis> aswin:  if fdisk is not showing it. then theres some bigger problems. check the output of 'dmesg'  as you insert the device.
[16:41] <eliotn> hello
[16:41] <ultimate> türk var mı la türk
[16:41] <Dr_Willis> aswin:  it could be dead.. or some other odd issue.
[16:41] <aswin> how to do tht
[16:41] <chisel_> geirha: yes all files copied over
[16:41] <aswin> in windows it was atleast telling me to format it
[16:41] <Dr_Willis> aswin:  plug it in.. run 'dmesg' wait a few sec.. run 'dmesg' again.. watch what it says.. or use 'tail -f /var/log/messages' to watch for kernel messages as you insert it
[16:42] <geirha> chisel_: If you right-click the installer.exe file and choose run with wine, does that work?
[16:42] <GigsWork> I wonder if I can install a local proxy to rewrite the URLs that apt is trying to load so it gets the right files.
[16:42] <cousin_mario> hello
[16:42] <cousin_mario> anyone using 32bit firefox on a 64 bit install?
[16:43] <chisel_> geirha: i tried that as well, got a mini window "access denied
[16:43] <aswin> [  527.819710] usb-storage: waiting for device to settle before scanning
[16:43] <aswin> [  532.808289] usb-storage: device scan complete
[16:43] <aswin> [  532.809020] scsi 9:0:0:0: Direct-Access     fffff    UMP V1.7.0       5.00 PQ
[16:43] <{g}> Im trying to watch TV with me-tv. The channel-search finds a couple of channels. But the image is alway just black. Also I dont see any controls to switch between channels. Any ideas?
[16:43] <Scunizi> what's the kde version of gparted?
[16:43] <xangua> qtparted Scunizi
[16:43] <aswin> i remember the pendrive name used to be something like ffffu....
[16:44] <eric_> Dr_Willis: adding gksudo prompted me for a password, but nothing happened after entering it, so by launch it in a terminal do you mean i have to specify in the launcher that its to open in a terminal?
[16:44] <BluesKaj> cousin_mario, the default FF is whatever your platform uses , if you used the default FF installer
[16:44] <Scunizi> xangua: thanks.. been looking in the package manager and couldn't recognize it.
[16:44] <cousin_mario> BluesKaj: of course it is, but I need to use a 32bit plugin without ndiswrapper
[16:44] <ubutom> !tr > ultimate
[16:44] <geirha> chisel_: Ok, did you copy them as root perhaps? Change ownership of the files to yourself.  sudo chown -R $USER:$USER ~/Desktop/wowlk
[16:44] <bagua> ks3 it looks like upstart controls it and I can turn the cron on with upstart so the solution is probably telling cron to run on startup using upstart
[16:44] <Scunizi> xangua: still doesn't show up
[16:45] <Dr_Willis> eric_:  use a text editor that has an actual X gui like gedit. not vi.
[16:45] <bagua> something like start on startup...  Will research syntax.  Thanks for your time today.  I appreciate your time
[16:45] <BluesKaj> cousin_mario, well i had to state the obvious
[16:45] <Dr_Willis> eric_:  or make the alias run a terminal that runs the commands..   'xterm -e commandtorun'
[16:46] <chisel_> geirha: chown: cannot access `/home/chisel/Desktop/wowlk': No such file or directory
[16:46] <Njh> does anyone know how to search through multiple files in a certain directory ... would it be  {directory} | grep "string"
[16:46] <n00p> hey guys, Apache crashes on ubuntu when someone visits... Linux zlstudios 2.6.32-22-generic-pae #33-Ubuntu SMP Wed Apr 28 14:57:29 UTC 2010 i686 GNU/Linux
[16:46] <n00p> any idea what the problem could be?
[16:46] <Pici> n00p: Any hints in your apache logs?
[16:46] <aswin> [  527.819710] usb-storage: waiting for device to settle before scanning
 [  532.808289] usb-storage: device scan complete
 [  532.809020] scsi 9:0:0:0: Direct-Access
[16:47] <rafu> Njh: use the find command
[16:47] <aswin> Dr_Willis this was  wat i got
[16:47] <aswin> is there a way to find the drive in terminal and format frm terminal
[16:47] <Njh> rafu: im looking for strings inside of the file
[16:47] <Dr_Willis> aswin:  you should get more messages thjen that.  Eventually it will mention a /dev/sdXX  name for the pendrive
[16:47] <geirha> chisel_: What's the actual name of the folder?
[16:47] <Pici> Njh: grep -R "string" /path/to/dir
[16:47] <ActionParsnip> aswin: sudo fdisk -l
[16:47] <Dr_Willis> aswin:  untill you determine that /dev/sd## name - you are not going to be doing much with it
[16:48] <chisel_> geirha: wowlk
[16:48] <rafu> Njh: aaah, ok then use cat | grep <something>
[16:48] <geirha> chisel_: in Desktop? Remember that case matters. Wowlk is not the same as wowlk
[16:48] <{g}> Im trying to watch TV with me-tv. The channel-search finds a couple of channels. But the image is alway just black. Also I dont see any controls to switch between channels. Any ideas?
[16:48] <Dr_Willis> aswin:  and if 'sudo fdisk -l' is not showing the device at all. Its possible the flash drive is bad/going bad. or you could try a different usb port
[16:48] <Njh> Pici: thanks
[16:48] <aswin> i'm not able to get /dev/sd number
[16:49] <Dr_Willis> aswin:  Untill you get that.. you are not going to be doing much with it.
[16:49] <aswin> ok thanks Dr_Willis
[16:49] <MaJic_NinJa>  /msg yves10
[16:49] <aswin> ActionParsnip:i tried that and it was showing all the hard drives but not the pendrive
[16:49] <chisel_> geirha: sorry, i put the wowlk folder inside wine's c:\ program files to see if i could install that way. now lemme try the chown commmand
[16:50] <ikhider> Hello all, last night when I rebooted the computer I could not get an OS. All I get is a winking cursor on the top left hand of the screen. Any ideas?
[16:50] <aswin> guess i'll try using some software..thank u guys
[16:50] <denn> russian channel ? ubuntu support
[16:50] <eric_> Dr_Willis: thank you sir, got it working
[16:50] <Pici> !ru | denn
[16:50] <denn> thanks
[16:50] <Dr_Willis> aswin:  some line similer to --> [187643.581913] sd 22:0:0:0: [sdh] 7567360 512-byte logical blocks: (3.87 GB/3.60 GiB) --- SDH is the drive name in this example
[16:51] <aswin> [  527.819710] usb-storage: waiting for device to settle before scanning
 [  532.808289] usb-storage: device scan complete
 [  532.809020] scsi 9:0:0:0: Direct-Access
[16:51] <aswin> [  532.813589] sd 9:0:0:0: [sdb] 32768000 512-byte logical blocks: (16.7 GB/15.6 GiB)
[16:51] <ActionParsnip> aswin: if all else fails put a big magnet next to it and it should blank it good
[16:51] <aswin> thats the pendrive 15.6Gb 1
[16:51] <Dr_Willis> aswin:  its sdb then...
[16:52] <aswin> ok so is ther ny progress..wat nest
[16:52] <Dr_Willis>  /dev/sdb1 would be partition #1 on the disk
[16:52] <ikhider> Hello all, last night when I rebooted the computer I could not get an OS. All I get is a winking cursor on the top left hand of the screen. Any ideas?
[16:52] <Dr_Willis> aswin:   sudo mkfs.ntfs /dev/sdb1         IF YOU ARE SURE thats the proper drive...
[16:52] <aswin> i just found tht sudo fdisk -l aslo showed the pendrive  Disk /dev/sdb: 16.8 GB, 16777216000 bytes
[16:53] <kreppnar> ikhider: did you have an update last night?
[16:53] <Dr_Willis> aswin:  if you are guessing wrong.. that will format the disk.
[16:53] <aswin> so i guess its corect
[16:53] <aswin> it shld be right?
[16:53] <aswin> Disk /dev/sdb: 16.8 GB, 16777216000 bytes
[16:53] <Dr_Willis> aswin:  its your stuff.. IS it right?
[16:53] <Dr_Willis> aswin:  if thers no partitions. You will need to partition the disk first
[16:53] <aswin> i got no drive with 16.8 gb space
[16:54] <aswin> i'll show u my other drives
[16:54] <ikhider> kreppnar: no
[16:54] <aswin> Device Boot      Start         End      Blocks   Id  System
[16:54] <aswin> /dev/sda1   *           1       12749   102400000    7  HPFS/NTFS
[16:54] <aswin> /dev/sda2           12749       25497   102400000    7  HPFS/NTFS
[16:54] <aswin> /dev/sda3           25497       28047    20479492+  83  Linux
[16:54] <aswin> /dev/sda4           28047       60802   263104512    7  HPFS/NTFS
[16:54] <FloodBot4> aswin: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[16:54] <tom3p> when i open a particular directory in nautilus, the ubuntu hardy desktop goes blank :( at least 3 minutes later, its ok. what can I look for?
[16:54] <kreppnar> ikhider: how long have you had it installed?
[16:54] <n00p> Pici: Sorry, no clues in apache logs...
[16:54] <chisel_> geirha: installer now pops up, stalls at 1% and getting blinking message "waiting for files to close"
[16:55] <ikhider> kreppnar: Several months
[16:55] <aswin> can i confrm it now
[16:55] <kreppnar> ikhider: sounds like a grub configure problem.
[16:56] <New2Ubuntu> Aptana anybody?
[16:56] <kreppnar> ikhider: but normally a computer would tell you "no operating system found" if it didn't have one at all
[16:56] <geirha> chisel_: wowwiki says you should unmount the dvd. Not sure if that could be related...
[16:56] <chisel_> geirha: i also noticed that all the copied files have now gotten rid of all the lock icons.
[16:56] <ikhider> kreppnar: All I get is a winking cursor, nothing else
[16:56] <ikhider> kreppnar: I went off for a while and came back, same winking cursor
[16:57] <geirha> chisel_: That's the chown's doing. You've become the owner of them now.
[16:57] <chisel_> geirha: should i just pop the disc out? is that the same?
[16:57] <kreppnar> ikhider: you dont have any  external devices or any cd in the drive that its trying to boot from do you?
[16:57] <geirha> chisel_: sudo umount /dev/sr0 if it's still mounted, then pop it out
[16:57] <ikhider> kreppnar: no
[16:57] <n00p> Sometimes when apache locks up it tells me some programs were closed because there isn't sufficient available memory...
[16:58] <kreppnar> New2Ubuntu: have you tried Screem or Quantum?
[16:58] <kreppnar> New2Ubuntu: wait, i ment Quanta
[16:58] <kreppnar> ikhider: have you tried booting a live ubuntu disk?
[16:58] <aswin> i decided to go with it and now its stuck Initializing device with zeroes:   2%
[16:59] <ikhider> kreppnar: No
[16:59] <New2Ubuntu> kreppnar: had a look at quanta but from research Aptana comes highly recommended
[16:59] <eliotn> has anyone created their own custom liveCD?
[16:59] <coffee_> hey I just installed Kubuntu and now I have a really strange soundproblem. Loads of applications dont work with sound or cam and some do. For example the cam test in kopete works but I cant tlk with cam over a skype account with kopete and I cant do it with skype directly. Then I can play a movie with sound and everything with the standard player but not with mplayer. I cant hear anything when I listen to youtube videos. Can anybody help
[16:59] <coffee_> me
[16:59] <ikhider> kreppnar: So you think it is a grub issue? Because I never did get a grub menu
[16:59] <kreppnar> ikhider: possible
[16:59] <valuedcustomer> how do i run a python script as root at startup?
[16:59] <LovehinaX> hello
[16:59] <kreppnar> ikhider: or has your harddrive failed you?
[16:59] <New2Ubuntu> Kreppnar: used dreamweaver for php websites
[17:00] <kreppnar> New2Ubuntu: ah
[17:00] <Dr_Willis> valuedcustomer:  run it from /etc/rc.local is one way
[17:00] <kreppnar> New2Ubuntu: is this Aptana only for Mac
[17:00] <chisel_> geirha: umounted, popped out the disc, cd'd to wowlk, did wine Installer.exe and still same response from installer. "waiting for files to close
[17:00] <Gorlist> evening, I was wondering if anyone could recommend a good program to check for (physical) hard drive errors?
[17:00] <valuedcustomer> Dr_Willis: where in rc.local?  at the end or in do_start
[17:00] <New2Ubuntu> kreppnar: all win mac os x
[17:00] <ikhider> kreppnar: No, my hard drive did not fail me
[17:00] <GeekSquid> !fsck | Gorlist
[17:00] <Gorlist> thanks
[17:01] <kreppnar> ikhider: maybe you can boot a live cd..and if you have a thumb drive, make a start up disk?
[17:01] <geirha> chisel_: Hm. Not sure what that could mean. You could try asking in #winehq, they might have more experience with that.
[17:01] <Dr_Willis> valuedcustomer:  befor the exit command.. check the comments of the file
[17:01] <New2Ubuntu> kreppnar: www.aptana.com
[17:01] <kreppnar> ikhider: to see if you can get it to boot your linux
[17:01] <valuedcustomer> ok.  thanks
[17:01] <wayne_> I'm looking for help with Qimo the kids software. PM me.
[17:01] <kreppnar> New2Ubuntu: yeah looking at it now
[17:01] <yves10> I found it
[17:02] <chisel_> geirha, i'll give it a shot, keep yer fingers crossed
[17:02] <yves10> https://wiki.ubuntu.com/IrcGu
[17:02] <New2Ubuntu> kreppnar: can not decide if eclipse plug in or stand alone
[17:02] <yves10> nvrmind
[17:02] <yves10> wrong one
[17:02] <yves10> irssi.org/themes
[17:02] <kreppnar> New2Ubuntu: i just use the straight out Eclipse program ;P
[17:02] <Vigo> coffee_: Are you using the Proprietary  or 'ugly' driver sets?
[17:03] <valuedcustomer> Dr_Willis: the comments don't say much.  just an INIT INFO block.
[17:03] <ikhider> kreppnar: Okay, I will download a live disc, thanks!
[17:03] <kreppnar> ikhider: yeah they should have a boot disk creating option on the live cd
[17:03] <McMINI> Hi i just installed Ubuntu on a mac mini. I see, that one core is completely blocked by a process called backend. (/usr/share/checkbox/backend). Any ideas what seems to be the problem?
[17:03] <New2Ubuntu> kreppnar: all linux ide's diffcult for me dreamweaver made me lazy
[17:04] <coffee_> well I didnt do anything on my own so far
[17:04] <kreppnar> ikhider: that should possibly kick start grub, and possibly detect your old linux install
[17:04] <coffee_> Vigo: didnt change anything. what shall I try?
[17:04] <kreppnar> New2Ubuntu: lol cant be lazy with linux :p
[17:04] <coffee_> Vigo: can I give you some helpful output or something?
[17:04] <MaJic_NinJa> like window 1 is stats 2 ubuntu or whatever room your at then msg window 3
[17:05] <ljl> i'd like to make my Radeon 9600 (RV350) card work with Lucid, however Jokey is not showing any drivers for some reason, and i'm not otherwise sure which thing i should be installing.
[17:05] <New2Ubuntu> kreppnar: thats what i like about linux makes you really know IT
[17:05] <LovehinaX> I have a usb gamepad thats being recognized as: "DragonRise Inc. Generic USB Joystick" but it isnt working correcty, how would I go about calibrating it?
[17:05] <sllide> devolping a OS isnt so hard as it looks
[17:05] <MaJic_NinJa> sorry wrong room
[17:05] <sllide> only the asm part is evil D:
[17:05] <McMINI> i just killed the process and nothing changed. any body knows what is the purpose of the backend thread?
[17:05] <kreppnar> New2Ubuntu: aye..makes you actually learn something about computers :p
[17:05] <Vigo> coffee_: That could be were the solution is, would take about 20 lines to explain it here, let me look on the forums for you.
[17:05] <tom3p> what would cause nautilus to take 5 minutes to open a directory with 637 debs in it?
[17:05] <krushnaghodke> hiiiiiiiiiiiiii
[17:06] <ActionParsnip> LovehinaX: can you give the lsusb ID for the device
[17:06] <ActionParsnip> LovehinaX: is it detected in jcalibrate ?
[17:06] <kreppnar> bbl
[17:06] <coffee_> Vigo: Well I tried some stuff but nothing special and I searched on the forums already but didn't find anything :( Its really strange cause some sound and videos stuff works and some doesnt
[17:06] <ActionParsnip> tom3p: previews maybe
[17:07] <tom3p> i use list displays, and debs dont have previews that i know of
[17:07] <tom3p> thx tho
[17:07] <xylander> #ubuntu.pl
[17:07] <New2Ubuntu> kreppnar: am from africa have IT company 10 years now not so big on Linux
[17:07] <Zela> Why does my mousepad freeze when I push a certain button on my Gateway computer? I dual boot with win7
[17:07] <Zela> I cant get it to unfreeze, without a restart
[17:07] <Pici> xylander: Please stop typing the channel name in here, you can join it without typing it for the rest of us to see.
[17:07] <LovehinaX> ActionParsnip: "Bus 003 Device 002: ID 0079:0006 DragonRise Inc. Generic USB Joystick"
[17:08] <usuario> ola
[17:08] <Vigo> coffee_: KDE can be quirky in those areas, anything can, is Pulseaudio installed?
[17:08] <usuario> hola
[17:08] <usuario> helo
[17:08] <usuario> hello
[17:08] <Pici> !hi | usuario
[17:08] <usuario> hi
[17:08] <New2Ubuntu> kreppnar: do use eclipse to develop php websites?
[17:08] <coffee_> Vigo: no shall I install it?
[17:09] <Zela> Why does my mousepad freeze when I push a certain button on my Gateway computer? I dual boot with win7 I cant get it to unfreeze without a restart anyone can help?
[17:09] <Dr_Willis> Zela:  care to tell us what button?
[17:10] <brotha> have you checked the keybindings on ur computer? u cld have possibly bound said button to ur mouse pad off option
[17:10] <Vigo> coffee_: I am still looking,,that is the common solution to those errors. pulse and or alsa ,
[17:10] <Zela> Dr_Willis, Its a button on my Gateway computer it looks like a touchpar with a finger touching the pas and the finger has a + sign on it, it came on the Gateway computer next to the wifi insignia
[17:10] <tamzin> zyco
[17:11] <tamzin> hi
[17:11] <Dr_Willis> Zela:  so you are refering to the 'laptops touchpad on/off' button....
[17:11] <brotha> ...that is your mouse pad off option. if you push it a second time it should theoretically come back on
[17:11] <tamzin> chatttttttttttttttttttttt
[17:11] <ActionParsnip> LovehinaX: sudo modprobe joydev; sudo modprobe analog; sudo modprobe ns558       may help
[17:11] <Zela> Dr_Willis, I guess, but it freezes the mouse so how do I unfreeze it when I hit the button on acccident?
[17:11] <Dr_Willis> Zela:  fn+thatkey should turn it on/off
[17:12] <brotha> by hitting it again
[17:12] <LovehinaX> ActionParsnip: thanks Il try that out
[17:12] <Milp_main> Is there a way to add support for swapping into a kernel that doesnt support it (via modules or similar) without compiling a new kernel?
[17:12] <brotha> i think he means an actual physical button near his mouse pad tho. not like a function key
[17:12] <Dr_Willis> Zela:  how are you hitting that by accident?   every laptop ive seen requires the FN+specialkey or a specific key thats not easially hit. to turn it on/off
[17:12] <Zela> no its a touch sensitive button
[17:12] <Zela> Dr_Willis,
[17:12] <Vigo> coffee_: Here is a very attentive thread: http://ubuntuforums.org/showthread.php?t=766683&highlight=sound+video+KDE
[17:12] <brotha> dr_willis: no some of them have it on thier mouse pad
[17:13] <Machtin> hey guys. i'm trying to launch KDE, but am stuck with a black screen.. i can see/move the mouse, but that's it.
[17:13] <shane2peru> using command line, isn't  a ";" like a new line??  so command 1 ; command 2  the first would finish, then the second would start?
[17:13] <Machtin> any ideas on how to solve that?
[17:13] <Dr_Willis> brotha:  one of mine does.. but its very hard to accidently hit it.
[17:13] <xangua> Machtin: have you already installed kubuntu-desktop ¿
[17:13] <Dr_Willis> shane2peru:  try it..   ls ; cd / ; ls
[17:13] <Zela> Dr_Willis, Its a sensitive touch button
[17:13] <abhijain> hello
[17:13] <abhijain> everyone
[17:13] <Machtin> uhm, should be xangua.. it's kubuntu actually and worked for several months
[17:14] <abhijain>  i just want to know that how can i connect my internet with data card
[17:14] <mims> hello
[17:14] <brotha> Dr_Willis: i know what you mean, but some of them are touch sensitive and relatively easy to accidentaly hit. either way i see where you are coming from and am not entirely sure how this is a distinct problem lol. but ya
[17:14] <LovehinaX> ActionParsnip: still same problem, when I try to set some buttons in ZSNES, it quickly just sets it as J19...I dont even have time to press any button
[17:14] <Machtin> xangua: however, good hint! thank you! :)
[17:14] <coffee_> Vigo: thanks maybe that will help :)
[17:15] <mims> why on ubuntu after type "sudo" we still can use "tab" button for next command ?
[17:15] <Zela> brotha, Would you know how to make the pad come back on because my mouse pad does not work in Ubuntu when I hit it
[17:15] <shane2peru> Dr_Willis, yes, but those are so simple, I'm dealing with the second process cannot start until after the other finishes, I can't tell if those are run simultaneously, or one after the other.
[17:15] <Dr_Willis> mims:  very well configured 'bash completion'
[17:15] <antivirtel> hello all, how can I write simple data a just deleted DVD-RW disc? I've deleted with brasero, but It isnt mounted, and GnomeBaker drops the formatted disk out-> "doesent seem as a writeable DVD"; but I can write it in windows with nero :S
[17:15] <slawek> jest ktoś z polski
[17:15] <Vigo> coffee_: You are quite welcome, that one looks like it covers all Kubuntu multimedia stuff....
[17:15] <abhijain> i have data card but due to .exe format i am unable to install driver so how can i coonnect internet in ubuntu with data card
[17:16] <brotha> zela, the best advice i would have would be to hit the button again and beyond i have no idea.
[17:16] <Dr_Willis>  shane2peru  theres also the &&  method. Check the vaious bash guides and advanced bash scripting guide perhaps.
[17:16] <antivirtel> slawek > #ubuntu-pl
[17:16] <brotha> zela, or to use a mouse and jus tleave ur touchpad disabled
[17:16] <brotha> zela, i am sorry to not be of more help
[17:16] <Dr_Willis> shane2peru:  if the first one spawns to the background  the 2nd one will then run.
[17:16] <Zela> brotha, that does not work, and I have to restart my computer for it to work again, np
[17:17] <shane2peru> Dr_Willis, I tried another test, mkdir testing ; mkdir testing/new ; ls testing/ ; rmdir testing/new ; rmdir testing
[17:17] <benkevan> man .. I think Ubuntu is going down the tubes.. or at least becoming more arrogant from the top up
[17:17] <Machtin> really worked, there was some broken stuff. thanks xangua :)
[17:17] <mims> Dr_Willis, bash completion ? how i use it on other distro ?
[17:17] <benkevan> http://www.itwire.com/opinion-and-analysis/open-sauce/39723-ubuntu-apes-novell-in-ip-scare-campaign
[17:17] <shane2peru> Dr_Willis, thanks for the info
[17:17] <LovehinaX> ActionParsnip: on mupen64...it doesnt even regognize any buttons, even if it says that there is a USB joystick connected
[17:17] <brotha> zela, hvae you looked at your keybindings and mouse settings just in case something got mixed up in there?
[17:17] <Zela> brotha,  nope
[17:18] <Dr_Willis> mims:  most disrtos have it. its a bash feature - check the bash docs.
[17:18] <Vigo> !offtopic | benkevan
[17:18] <tom3p> ubuntu hardy nautilus took over 5 minutes to display directory with >600 .deb files in list mode. turned off assistive technologies, logged out & back in. fixed now ! :)
[17:18] <Milp_main> I use lxde as window manager, and sometimes when im using it, i just cant seem to start any programs from the window manager anymore, if i have a console window open i can use it to start things, but i cant start or open anything from desktop or menus. How would i go about debugging this situation?
[17:18] <brotha> zela, i would think about doing so, however idk if it will reveal your problem. if you have said button bound to just off then it will not turn back on for example. but i am not sure how one might accidentaly do such a thing
[17:18] <LovehinaX> ActionParsnip: ops...I was wronge...I didnt select it...but when I do...same this happens as in ZSNES...it quickly just sets it to some button...I dont even have time to press anything
[17:18] <Dr_Willis> Milp_main:  you mean a 'terminal window' ? launch commands from it with 'commandname &' normally
[17:19] <wayne_> Hi, I'm looking for help with the Qimo kids software. I currently run xubuntu 10.04.
[17:19] <Dr_Willis> Milp_main:  theres the #lubuntu channel also
[17:19] <shane2peru> Dr_Willis, I always get & and && confused, so that is why I want to implement ; should be easier for me to remember, seems as though it is like a new line, and doesn't run till after the first command completes.
[17:19] <benkevan> Milp_main:  maybe you can boot into runlvl 3, do start x and check the output your're getting from X
[17:19] <LovehinaX> ActionParsnip: I think that this it due to that the gamepad isnt calibrated or whatever...but...I have no idea how to do that
[17:19] <ActionParsnip> LovehinaX: you could look at the manufacturers site to see if they support Linux. I'd get zsnes running first as muppen has extra complications with joypad plugins tc
[17:19] <Dr_Willis> shane2peru:  its 'command continuation' not a newline.     bash also has a \ type feature to have VERY VERY long command lines.
[17:20] <ActionParsnip> LovehinaX: check jscalibrate to calibrate it, may help
[17:20] <Dr_Willis> shane2peru:  && may be what you want.
[17:20] <LovehinaX> ActionParsnip: isnt jscalibrate outdated and not supported in Lucid?
[17:20] <shane2peru> Dr_Willis, right, I just continue to dabble with bash cli, no real formal training. :)  Thanks for the info.
[17:21] <Dr_Willis> shane2peru:  it pays to read thet advanced bash scripting guide,. and track down a copy of the Oreily's using Bash book.
[17:21] <Vigo> !man
[17:21] <LovehinaX> ActionParsnip: Im using jscal instead...but...I dont know what to type in the device thingy...
[17:21] <New2Ubuntu> thx all
[17:21] <jackfruit_bill> Hi all , i have been trying to upgrade from Karmic to Lucid from India , over the net  for past 2 days,  but I find the mirrors are too slow like a 5 to 6 kbps , any information i might be missing?
[17:21] <shane2peru> Dr_Willis, yes, I have scoured the web many a time for bash info, probably should get me a copy of Oreily's book, some day. :)
[17:22] <ActionParsnip> LovehinaX: muppen64 is also undeveloped these days ;)
[17:22] <remoteCTRL> hi guys!
[17:22] <Failican> Hey, just installed ubuntu 10.04 on my netbook its awsome!
[17:22] <remoteCTRL> can anybody pls recommend me an app that can convert jpeg files into gif files?
[17:22] <LovehinaX> ActionParsnip: I ment the plus version
[17:22] <Dr_Willis> shane2peru:  found one in the bargin bins once. (an earlier edition) but the info is still good :)
[17:22] <ActionParsnip> LovehinaX: last update for "news" on the site was 2005
[17:23] <Dr_Willis> remoteCTRL:  youi want a command line? or gui tool?
[17:23] <LovehinaX> ActionParsnip: I know that...Im not using that one
[17:23] <ActionParsnip> LovehinaX: yeah looks like its in google code
[17:23] <shane2peru> Dr_Willis, well, I will have to wait till I get back to the Good ole USA, there isn't any bargain bins here in Peru.
[17:23] <remoteCTRL> Dr_Willis: prefer commandline?
[17:23] <LovehinaX> ActionParsnip: also...why isnt there a place in Ubuntu where I can se all my device...like a controll panel?
[17:23] <Dr_Willis> remoteCTRL:  the imagemagick tools can do that
[17:23] <remoteCTRL> Dr_Willis: that is cli?
[17:24] <llutz> remoteCTRL: convert file.jpg file.gif
[17:24] <Dr_Willis> yes.. thats what you asked for... :)
[17:24] <Vigo> !cli | remoteCTRL
[17:24] <remoteCTRL> Dr_Willis: nice, thanks!:)
[17:24] <remoteCTRL> Vigo: thanks for the info but i know what a cli is;)
[17:25] <Vigo> okee dokee
[17:25] <remoteCTRL> llutz: also nice, also thanks!:)
[17:25] <lsh> 这是什么聊天室阿
[17:25] <Ceb> Does anybody here know their way around alsa and pulseaudio? I'm having a heck of a time getting my ac97 surround sound working properly.
[17:25] <lsh> 怎么没有人相应阿
[17:26] <_pg_> hello, can anyone think of the best way to watch the world cup on my computer? the flash player on espn3.com is really choppy on my weak computer. lightest way possible /ideas?
[17:26] <Dr_Willis> is ac97 an actual chipset? or just a 'standard' like the old 'sound blaster compatiable' standard years past?
[17:27] <Vigo> !multimedia | Ceb
[17:27] <wad> I installed apache, but I don't want it running automatically on boot. Should I just delete all of its entries under rc?.d or something else?
[17:28] <brotha> sslserver
[17:28] <ActionParsnip> LovehinaX: you can use: sudo lshw | less     or you can use hwinfo
[17:28] <buppa_> Anyone know why ati drivers for Radeon HD 5770 doesnt work very well? The CPU usage is very high.
[17:28] <LovehinaX> ActionParsnip: when I do this: "jscal -c /dev/input/js0 " it sais: "Joystick has 30 axes and 112 buttons." WHAT?
[17:28] <Ceb> it's an intel chipset, but as far as I understand ac97 is a standard ... communication? ... type for all ac97 based chipsets, so the same configuration would work for all of them.  I may be wrong.
[17:28] <Teluge> hey guys i need some interesting help
[17:28] <brotha> chanopt
[17:28] <Ceb> so... more a standard.
[17:29] <ActionParsnip> LovehinaX: no idea man. i dont use joypads
[17:30] <Ceb> But to troubleshoot the problem, I'm trying to understand, does application audio get sent to pulse then to alsa? Or the other way around?
[17:30] <LovehinaX> ActionParsnip: okej thanks anyways...
[17:30] <Teluge> i'm trying to instyall crunchbox(an ubuntu derivitave) from a usb stick(my computer doesnt support boot from usb so i redid the boot.ini) how do i burn the iso to the usb correctly?
[17:30] <ActionParsnip> LovehinaX: check manufacturers site to see if they support linux
[17:31] <Teluge> they do ^^
[17:31] <LovehinaX> ActionParsnip: Il have to do that
[17:31] <ActionParsnip> Teluge: crunchbox (or crunchbang) isn't supported here
[17:31] <Teluge> oh
[17:31] <LovehinaX> ActionParsnip: but..the gamepad is working...its just needs to be set correctly :(
[17:31] <Teluge> ok then tell me how i would do it with the newest ubuntu ^^
[17:31] <ActionParsnip> Teluge: this is Ubuntu support only
[17:31] <ActionParsnip> !crunchbang | Teluge
[17:31] <Vigo> !usb | Teluge
[17:32] <Teluge> ty ty
[17:33] <Vigo> Teluge: Yet ActionParsnip was quite correct, that link may help and that is what it is all about ,,l,,,
[17:33] <_pg_> whats the lightest way to watch world cup on my machine?
[17:34] <ubutom> _pg_, tv-stick/card?
[17:35] <_pg_> ubutom: from the web to be precise. my hardware is weak and stuters badly on espn3 live streaming.
[17:35] <ActionParsnip> _pg_: flash on the internet, itv in the uk may stream it
[17:35] <gothenburg> flash xD
[17:35] <lungan> Having som audiotrouble in ubuntu 10.04, If i start firefox before spotify or antything else, the sound only works in firefox (yuotube etc), but if I start spotify first, the sound only works in spotify
[17:35] <regeya> turn off your computer and turn on the TV, can't get much lighter on cpu resources than 'off' ;-)
[17:35] <ubutom> _pg_, don't know  if or who streams it, I'll watch with dvb-t here :)
[17:35] <ActionParsnip> regeya: +1 dude
[17:35] <_pg_> ActionParsnip:  ubutom the flash rapes my weak machine. what is db t?
[17:36] <_pg_> dvb-t?
[17:36] <regeya> broadcast tv
[17:36] <ubutom> teresstrial digital tv, it's free here and the major games will be broadcasted there
[17:36] <_pg_> regeya: not everyone has access lol
[17:36] <ActionParsnip> _pg_: its ubuntu not ubuntom
[17:36] <_pg_> ubutom: can I watch that online?
[17:36] <_pg_> ActionParsnip: huh?
[17:37] <regeya> true _pg_ there's no way i'd be able to stream at work b/c I'm on old G4 PPCs in this dept
[17:37] <Ganymede> ActionParsnip, i think he's referring to someone's nick in this channel
[17:37] <ActionParsnip> _pg_: sorry, misread
[17:37] <ActionParsnip> Ganymede: yeah, just realised :\
[17:37] <_pg_> haha yes.
[17:37] <ubutom> _pg_, sadly, no, it's a receiver I use
[17:37] <_pg_> ubutom: garb...
[17:37] <regeya> frame a sec on an old quicksilver
[17:38] <ubutom> _pg_, but maybe there are some services out there that stream the channel you want to use, either way your computer has to be able to play such a stream
[17:38] <regeya> hopefully html5 streaming video will become more prevalent
[17:38] <regeya> but that doesn't help today
[17:38] <Guest61934> bonjour
[17:38] <_pg_> ubutom: I will look into p2p streaming things, maybe those will be better. most use flash tho and its just garbage
[17:39] <_pg_> ubutom: even though i have 2gb ram its the intel gma950 that sucks.
[17:39] <h00k> !piracy | _pg_
[17:39] <ubutom> _pg_, yeah, well, maybe you can watch it at some friends place
[17:39] <_pg_> h00k: p2p ≠ piracy
[17:39] <ubutom> _pg_, or public screening
[17:39] <Guest61934> ont peut m'aider sur amsn
[17:40] <regeya> !fr | Guest61934
[17:40] <osaris> !rsyslog
[17:40] <h00k> _pg_: I'm aware, this isn't a debate about that, please discuss obtaining videos elsewhere.
[17:40] <osaris> !logrotate
[17:40] <osaris> !sysklogd
[17:40] <h00k> ubottu: tell osaris about msgthebot
[17:40] <osaris> grr
[17:41] <sarthor> Hi, i am installing thinkpad finger print device with some automaic scrip, but it says make[1]: *** [mds_app_util.lo] Error 1
[17:41] <_pg_> h00k: whattttever can anyone comment on the perforamance of flash /alternatives on different ubuntu setups on similar hardware and what might work best? does anyone use gnash?
[17:41] <sarthor> any idea?
[17:41] <sarthor> I got that script here, http://www.thinkwiki.org/wiki/Talk:Code/enable-fingerprint-reader
[17:42] <gothenburg> Where can I download the xubuntu default black theme?
[17:42] <ubutom> _pg_, what's your hardware?
[17:43] <_pg_> ubutom: atom 1.6, 2gb ram, gma950
[17:43] <yves10> sad
[17:44] <ubutom> _pg_, hm, don't know much about the processor and the gfx, is that problem only with espn or also with other flash videos?
[17:44] <osaris> need help with logrotate on 9.10. have massive mail.log files. logrotate -f does not seem to work
[17:44] <amanthethy> _pg, those atom processors are a bother, aren't they.
[17:45] <_pg_> ubutom: all flash is sub par on it , but esp the espn thing
[17:45] <_pg_> amanthethy: indeed.
[17:45] <_pg_> amanthethy: maybe just flash tho. it runs PS fine but sucks at flash :/
[17:46] <amanthethy> _pg, I recently built a touchscreen display for the company I work for. Did it up as a web app, using javascript (under 100 lines of formatted code) and html. The thing just chugs on the atoms.
[17:46] <Shinhan> How can I change resolution in command line mode? Everything I google about changing resolution CLI talks about various commands for X server, while this installation of ubuntu server doesnt even have X. It just has too high resolution so the letters are really small. (its a 19" CRT)
[17:47] <amanthethy> _pg, check out www.omgubuntu.co.uk they just put up a post on how to make flash cooperate
[17:47] <resno> Shinhan: i have the same problem, try asking in #ubuntu-server
[17:47] <amanthethy> _pg,  I also think that your chip may support Intel's GMA Booster
[17:48] <amanthethy> _pg, http://www.omgubuntu.co.uk/2010/06/gma-booster-promises-24x-power-for.html
[17:48] <songer> hello
[17:48] <songer> how can i reboot from ctrl+alt+f4
[17:48] <ubutom> _pg_, I think flash got greedier for resources over the years, a year ago I could use my old laptop to watch flash, now it doesn't work with windows or linux or lubuntu
[17:49] <amanthethy> songer, "sudo reboot" should work
[17:49] <rolandpish> Hi. I have this issue: I added a third-party repository and installed a package. Then I decided to remove the package and the repository, but after an apt-get update the uninstalled package is still listed in synaptic. Is there some way to remove that package from the list of available packages?
[17:49] <songer> or turn off, sudo shutdown?
[17:49] <songer> amanthethy,
[17:49] <resno> rolandpish: purge it?
[17:50] <amanthethy> songer, sudo shutdown now
[17:50] <hsh> hi all
[17:51] <resno> !pm | rolandpish
[17:51] <scarra3> I need a littler help I am just about to install ubuntu on my desktop and my wireless card is not supportd out of the box the hardware manager downloads it my only problem is I don't have a long enough lan line so I can install the driver.  I have a laptop but I have no clue where I would download the driver from.
[17:51] <scarra3> The wireless card is a broadcom
[17:51] <songer> ok becose i have some problems with my monitor resolution
[17:52] <rolandpish> resno: I executed: apt-get purge nameofpackage, but is still listed in synaptic. And double checked that I removed the repository.
[17:52] <songer> and i can't see my desktop
[17:52] <scarra3> Any ideas
[17:52] <resno> rolandpish: not sure then.
[17:52] <hsh> scarra3 , use ndiswrapper
[17:52] <ubutom> scarra3, after an update you might be able to load the drivers, was like that for me
[17:53] <Alphanaut> so would the logs capture the culprit of a full ubuntu freeze, and if so where would i find that info?
[17:53] <oliva> hi there ... I'm trying to install ubuntu 9.10 karmic desktop on a dell server, but I got a kernel panic ... how can I fix this?
[17:53] <SmartGuy>  can anyone tell why a particular site is not displayed for me alone others can see it
[17:53] <Alphanaut> prozac
[17:53] <scarra3> No the driver is there its loaded by the driver manager under administration my problem is I can't download it because I don't have a long enough lan line
[17:53] <scarra3> The card is a broadcom
[17:53] <resno> oliva: is it a fresh install?
[17:53] <oliva> resno: absolutely
[17:54] <unop> Alphanaut, probably not, if the system locks up, the logs might not be written to - but have a look at the files in /var/log
[17:54] <scarra3> Do you have any ideas where I can get a .deb of the drivers so that I can install them
[17:54] <ubutom> scarra3, I could load the drivers with hardware driver thing from menu after installing all recent updates, didn't run for me out of the box aswell
[17:54] <Alphanaut> ok, i'll look there.  my first full freeze in linux, odd
[17:54] <Alphanaut> right after i fired up the default torrent client in 10.04
[17:54] <resno> SmartGuy: what do you see when you visit the site?
[17:54] <erUSUL> !broadcom | scarra3
[17:54] <wompshmack> Anyone here speak spanish?
[17:54] <HsH> scarra3, what wersion of Ubuntu ?
[17:54] <Pici> !es | wompshmack
[17:54] <erUSUL> !es | wompshmack
[17:54] <scarra3> 10
[17:54] <csxdfcsdfcsd> Hi
[17:54] <SmartGuy> Firefox can't find the server at www.emaths.info.
[17:54] <scarra3> *10.04
[17:54] <krtek> http://www.animeclub.us
[17:55] <oliva> is it possible to ungrade the kernel in the installation iso somehow?
[17:55] <wompshmack> I don't speak spanish, I'm just looking for a spanish guide for a friend of mine.
[17:55] <h00k> !ot | krt
[17:55] <h00k> bah.
[17:55] <Alphanaut> smartguy try putting in the IP address directly to see if it's a dns issue
[17:56] <oliva> upgrade*
[17:56] <Alphanaut> http://216.151.164.39:80
[17:56] <SmartGuy> ok
[17:56] <HsH> scarra3, https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx ?
[17:56] <erUSUL> !remaster | oliva
[17:56] <Alphanaut> odd
[17:56] <Alphanaut> i cant see it via ip either
[17:56] <scarra3> HsH ya that's the driver
[17:56] <Alphanaut> fun
[17:56] <wompshmack> I just wanted to find a nice introduction to like "What linux is" in spanish. If anyone here is bilingual or just knows of one, it would help!
[17:57] <scarra3> Is there a way I can install that without being connected to the internet
[17:57] <resno> wompshmack: there is a spanish channel
[17:57] <SmartGuy> IIS Domain Service for this domain is locked, or there's no such IIS Domain Service registered in Parallels Operations Automation.
[17:57] <resno> !es | wompshmack
[17:57] <unop> wompshmack, tried asking in #linux-es ?
[17:57] <ubutom> scarra3, the laptop ios mobile, why don't you just move it to the lan cable? would be easiest :)
[17:57] <wompshmack> I'll give it  a shot.
[17:58] <scarra3> ubutom becaue I don't want to move my whole desktop down stairs
[17:59] <ubutom> scarra3, so it isn'T a laptop if you can'*T move it
[17:59] <HsH> b43-fwcutter is on the CD
[17:59] <scarra3> No it isn't a laptop
[17:59] <mozillo> !vu jlavait pas vu
[17:59] <HsH> in local repository
[17:59] <scarra3> Ok thx HSH
[17:59] <mozillo> !vu jlavait pas vu
[17:59] <Pici> !fr | mozillo
[18:00] <ubutom> scarra3, misread a message of ypou, thought it was a laptop, never mind :)
[18:01] <SmartGuy> resio any idea
[18:02] <SmartGuy> I am able to view by this
[18:02] <SmartGuy>  http://s1011477.cp.manasserver.com
[18:02] <ubutom> scarra3, you could connect the laptop with the desktop and use the laptop as gateway, only takes a crossover cable
[18:10] <huakien> hi all
[18:10] <travega> Hey this is my first time on IRC... I am looking for help with NS-2.34 am I at all in the right place?!!
[18:11] <Pici> travega: What is NS-2.34 ?
[18:11] <sarthor> Hi, i am installing thinkpad finger print device with some automaic scrip, but it says make[1]: *** [mds_app_util.lo] Error 1
[18:11] <sarthor> I got that script here, http://www.thinkwiki.org/wiki/Talk:Code/enable-fingerprint-reader
[18:12] <travega> Its a network simulator. Im looking for 3GPP and UMTS support in a network simulation envirnoment... Any ideas?
[18:14] <travega> Pici: Its a network simulator. Im looking for 3GPP and UMTS support in a network simulation envirnoment... Any ideas?
[18:14] <Pici> travega: I don't really know about such software, you could try asking the folks in ##networking if they have any suggestions though.
[18:15] <philsf> hi, I can't get my bluetooth adapter to be recognized with Karmic's newer kernels. The last one I got it working it, was the 2.6.31 from beta stage
[18:15] <philsf> how can I debug this, so can I open a proper bug?
[18:16] <iceroot> philsf: official karmic kernels? or selfbuild kernels?
[18:16] <SmartGuy> actually the nameserver should point to the hosting server am i right
[18:17] <iceroot> SmartGuy: that is the job of a dns-server yes
[18:17] <philsf> iceroot, official karmic kernels. I also lost ability to use my wifi killswitch (which also works with the old .31)
[18:17] <SmartGuy> what should i do with child name server
[18:18] <spvensko_> what's the least crappy ftp client for gnome?
[18:18] <iceroot> spvensko_: the one you like best
[18:20] <phylock> spvensko_ - depends on which features you look for
[18:20] <p1l0t> I can see my website from the Internet, but not from my local network... dns issue I suppose right?
[18:21] <p1l0t> ls
[18:22] <philsf> p1l0t: . .. Desktop Documents Examples Music
[18:22] <phylock> :)
[18:23] <lucas> #ubuntuforums-beginners
[18:23] <orangeppop> I've got an old HP Compaq NX9020 (with an Intel 82852 graphics thingy and a Celeron M CPU @ 1.4 GHz) and I can't get the 10.4 graphical installer to work - after having the ubuntu splash and the loading 'dots' for a while, they disappear with a flash of artifacting and then the screen turns black. I've tried the "fb=false video=vga16:off" boot parameters but the same thing happens. I can't boot into Ubuntu from the CD either, the s
[18:23] <p1l0t> philsf lol
[18:23] <lungan> Having som audiotrouble in ubuntu 10.04, If i start firefox before spotify or antything else, the sound only works in firefox (yuotube etc), but if I start spotify first, the sound only works in spotify
[18:24] <wpd> Hi folks... I would liketo be able to browse to http://mybox from a mixed environment of windows & macs.  What's the best way to advertise the hostname of my ubuntu box?  I have no control over the DNS server.  I've installed avahi, and can browse to mybox.local, but I'd like to eliminate the ".local" part.
[18:25] <ultimate> hi guys
[18:26] <Milp_main> How do i check free space for mounted images that arent shown in df?
[18:26] <ilpuccio> Hello. I'm looking for a guide on HowTo repackaging (recompile) an ubuntu packages. I want to recompile a package with specific CFLAGS
[18:27] <lucas> Hey, having trouble connecting to wireless network! Says bad password when I type in a correct one. Can't access unsecured AP's either.
[18:28] <Superjane> hallo
[18:28] <rellis> I've removed and reinstalled the postgresql-8.4 package a few times and it's not puting /etc/init.d/postgrslq-8.4 back... is there some way to tell apt to copy everything into place?
[18:29] <rellis> I've tried for install "sudo aptitude reinstall postgresql-8.4".. also tried individual remove/install
[18:29] <simps> hi all. i was wondering if there was a financial stocks reader that is commonly used that is easy to read and simple and looks nice like the gnome-system-monitor?
[18:29] <erUSUL> rellis: purge / install ?
[18:30] <rellis> erUSUL: I've never used purge, I'll try that. Thanks.
[18:32] <rellis> erUSUL: You're the man. That worked like a charm. Thanks again.
[18:32] <erUSUL> rellis: no problem
[18:32] <^Alita> hi to all
[18:32] <^Alita> someone knows why apache2 won't recognize the "order" statement?
[18:32] <^Alita> in the configuration file
[18:33] <Sk8rdude> If a patch for a bugfix is in the latest git, does that mean it will be in the latest RC release?
[18:33] <cognitiaclaeves> Is there a way to get a count of softlinks to a file?
[18:33] <sarthor> how can i use my ThinkPad SL510 fringerprint device on my Lucid 10.04
[18:34] <Pici> Sk8rdude: RC? Lucid has already been released.
[18:34] <Sk8rdude> Pici: i'm talking about wine
[18:34] <Shinhan> is there a chatroom for Samba support?
[18:34] <^Alita> someone knows why apache2 won't recognize the "order" statement?
[18:34] <Pici> Sk8rdude: You should ask the folks in #winehq about that then.,
[18:35] <llutz> ^Alita: ask at #httpd
[18:35] <^Alita> llutz, ok, i will try. thenks
[18:35] <Sk8rdude> Fair enough, will do
[18:36] <MKM> hi.., i just downloaded a windows application.., i use wine to run all my windows app.., but the problem now is that ubuntu is not letting me open that app.., its says that this app is downloaded from an untrusted source.., but i am sure its safe.., is there any way i can run this app...??
[18:37] <orangeppop> I've got an old HP Compaq NX9020 (Intel 82852 graphics, Celeron M @ 1.4 GHz, 480MB ram) and I can't get the 10.4 graphical installer to work - after having the ubuntu splash and the loading 'dots' for a while, they disappear with a flash of artifacting and then the screen turns black. I've tried the "fb=false video=vga16:off" boot parameters but the same thing happens. I can't boot into Ubuntu from the CD either, the same thing hap
[18:37] <Frijolie> I cannot unmount an external drive, I'm getting "WD_320GB': Device or resource busy"
[18:37] <Frijolie> how do you find out what's using the "resource"?
[18:38] <llutz> Frijolie: fuser
[18:38] <MKM> hi.., i just downloaded a windows application.., i use wine to run all my windows app.., but the problem now is that ubuntu is not letting me open that app.., its says that this app is downloaded from an untrusted source.., but i am sure its safe.., is there any way i can run this app...??
[18:39] <Frijolie> well, even a reboot didn't free the resource
[18:39] <Frijolie> ive even tried to remove the folder in /media
[18:39] <llutz> Frijolie: fuser -m /media/mountpoint
[18:39] <psusi> Frijolie: don't do that, that will delete everything on that disk
[18:39] <llutz> Frijolie: removing that folder will delete your data
[18:40] <Phaedrus[]> Can a GMA500 graphics card on Asus 0751h run compiz?
[18:40] <asdfasdfasdf> hi a question im planning to install ubuntu 10.04 on an intel core 2 duo network, should i install 64 bits version or 32? a time ago 64 bits was very experimental and tend to crash, has this changed?
[18:40] <Frijolie> well that's not good!
[18:40] <asdfasdfasdf> i wrote network and i mean notebook
[18:40] <jakexks> Phaedrus[], it should work fine
[18:41] <Phaedrus[]> jakexks: thanks
[18:41] <BrixSat> hello  :D how do i fiz this "FATAL: Module tun not found." ?
[18:41] <h00k> asdfasdfasdf: you can give it a shot, it works really well for a lot of people (myself included)
[18:42] <scarra3> Hey HsH ok I installed ubuntu and did the repositary thing you said but its saying for me to instert a cd
[18:42] <scarra3> but I installed ubuntu from a usb drive
[18:42] <simps> hi all. i was wondering if there was a financial stocks reader that is commonly used that is easy to read and simple and looks nice like the gnome-system-monitor?
[18:42] <MKM> hi.., i just downloaded a windows application.., i use wine to run all my windows app.., but the problem now is that ubuntu is not letting me open that app.., its says that this app is downloaded from an untrusted source.., but i am sure its safe.., is there any way i can run this app...??
[18:42] <asdfasdfasdf> h00k, thing is i dont want to mess up with bugs flash player and so on, is there any considerable advantage in using 64 bits? notice that i dont use any special app just browse the web and maybe jdeveloper
[18:44] <asdfasdfasdf> h00k, also in the download page says is not recommended for every day use...
[18:45] <asdfasdfasdf> Pici, woah you can put a cause for the ban in this server?
[18:45] <asdfasdfasdf> interesting.. never seen that.
[18:45] <h00k> asdfasdfasdf: it's a channel they wil be forwarded to.
[18:45] <p1l0t> I can see my website from the Internet, but not from my local network... dns issue I suppose right?
[18:45] <BluesKaj> scarra3, open your package manager and choose sources, make sure the cdrom and usb drives if listed aren't enabled
[18:46] <scarra3> What do you mean BluesKaj
[18:46] <asdfasdfasdf> h00k, ahh ok
[18:47] <BluesKaj> scarra3, it stops the package manager from asking for a cd
[18:47] <asdfasdfasdf> so what are the advantages of using ubuntu 64 bits rather than 32 bits?
[18:48] <psusi> asdfasdfasdf: certain things are faster, can handle more memory....
[18:48] <IsmAvatar> asdfasdfasdf: faster, since it uses your hardware better. Downside: some programs might not be built for 64 bit.
[18:48] <h00k> asdfasdfasdf: I notice faster performance in my startup and better video rendering when I do that
[18:48] <Frijolie> still get "device or resource is busy" after a fuser -m /media/mountpoint
[18:48] <BluesKaj> asdfasdfasdf, supposedly makes things faster , if you have 4G RAM or more
[18:48] <mkquist> asdfasdfasdf: it uses your hardware more effectively, I've been using 64bit ubuntu for quite awhile now and I find there are no problems with it at all
[18:48] <IsmAvatar> Ubuntu 10.04 (fresh install) doesn't seem to be picking up my USB/digital speakers, so I'm not getting any sound.
[18:49] <llutz> Frijolie: what was the output of the fuser.... (replace mountpoint with your actual dir, teh drive is mounted to)
[18:49] <psusi> Frijolie: and what did fuser SAY?  it just tells you what program is using what file there
[18:49] <asdfasdfasdf> interesesting, but then why isnt it recommended in the download page? is it in beta?
[18:49] <mkquist> asdfasdfasdf: just faster at processor intensive tasks... so upside no downside IMHO
[18:49] <scarra3> I got to Settings < Repositories < and I check CD thing at the bottom, then I click relad and I get the error Please Insert the disk labeled Ubuntu 10.04 LTS_Lucid into drive /cdrom/
[18:49] <scarra3> I unmounted the usb drive
[18:49] <h00k> IsmAvatar: can you click on your sound applet -> Sound Preferences -> Hardware and see if they're listed?
[18:49] <ua0ds>  Здравствуйте а не подскажите как в ubuntu "убивать" зависший процесс???????7
[18:49] <h00k> !ru | ua0ds
[18:49] <asdfasdfasdf> and can you run 32 bits apps easily or you need to isntall them in an special way or do anything extra to run them?
[18:49] <mkquist> asdfasdfasdf: def not beta
[18:49] <budmonk> Убить :)
[18:50] <ua0ds> но убить
[18:50] <psusi> asdfasdfasdf: you generally don't run 32 bit apps on a 64 bit system... it's all 64
[18:50] <Frijolie> http://pastebin.com/z5Cu28AW
[18:50] <scarra3> Is there a way I can mount the usb drive into /cdrom/
[18:50] <mkquist> http://www.ubuntu.com/desktop/get-ubuntu/download  looks like the option is right below 32 bit... in plain sight
[18:50] <asdfasdfasdf> psusi, so same question again why wouldnt i want to isntall 64 bits then as the downlaod page suggests?
[18:50] <mkquist> asdfasdfasdf: sry, ic what you mean
[18:51] <BluesKaj> !pm |scarra3
[18:51] <mkquist> asdfasdfasdf: well for me at least, I have no problems running 64bit
[18:51] <scarra3> !broadcom
[18:51] <asdfasdfasdf> mkquist, nothing? not even with flash player?
[18:51] <IsmAvatar> h00k: I switched it over to USB audio but it still isn't working
[18:51] <asdfasdfasdf> mkquist, how about drivers, office apps, mail, internet, anything i should know?
[18:52] <IsmAvatar> h00k: there's two of them there: internal audio and usb audio
[18:52] <scarra3> Ok I followed this tutorial https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx for the no internet access portion of it now I installed ubuntu from a usb drive not a cd drive what do I need to do
[18:52] <h00k> IsmAvatar: You'll want USB audio, I don't know if you will have to kill pulse or not for that to switch over
[18:53] <zeleftikam> anyone here by chance have experience with RAID 5 arrays?
[18:53] <orangeppop> I've got an old HP Compaq NX9020 (with an Intel 82852 graphics thingy and a Celeron M CPU @ 1.4 GHz) and I can't get the 10.4 graphical installer to work - after having the ubuntu splash and the loading 'dots' for a while, they disappear with a flash of artifacting and then the screen turns black. I've tried the "fb=false video=vga16:off" boot parameters but the same thing happens. Is it worth burning off the 'alternative installer
[18:53] <mkquist> asdfasdfasdf: so far the only think I had was on install, had to work out a small bug, that I dont remember.  Everything else is just fine.  I'm on the machine right now
[18:53] <notwist> Hey guys, quick question: I am now using brctrl to create a bridge to share my connection. Works fine, but when I start my computer everytime I have to set eth0 and eth2 (that i use) to 0.0.0.0 and set up brctl again manually. How do I get it to save the bridge and the settings for eth0 and eth2 to stay passive? Many thanks.
[18:53] <Frijolie> llutz, psusi: http://pastebin.com/z5Cu28AW
[18:53] <dartt> hey i m getting a error at boot that LAN has been currupted? what the heck is this?
[18:53] <IsmAvatar> h00k: since it doesn't seem to be taking effect yet, maybe I should. How do I do that?
[18:53] <asdfasdfasdf> mkquist, ok thx :)
[18:53] <mkquist> asdfasdfasdf: running virtualbox, gimp, compiz, konversation and sharing on a network with no problems
[18:53] <newbie> I'm not sure if this is the right place to ask this because it sounds paranoid. Is it possible for somebody tapping your internet to block unbuntu from accessing the internet because they know you recently switched to it from windows and xp and they cant install spyware. If they are monitoring packets they can tell what operating system you are using they prevent non windows operating system...
[18:53] <newbie> ...from using the internet right?
[18:53] <llutz> Frijolie: quiet a lot, "ps -p 1439"
[18:53] <newbie> sounds crazy I know
[18:54] <dagon> gotta question that I'm stumped on I gotta server that is a windows box. I used to be able to access the box with linux but for some reason it is not letting me. I'm curious on to why..The error is "Unable to mount location. Failed to retrieve share list from server
[18:54] <zeleftikam> newbie» mmm i wouldn't worry about that
[18:54] <scarra3> Any ideas?
[18:54] <mkquist> newbie: time for a tinfoil hat maybe?
[18:54] <mkquist> newbie: ; )
[18:55] <Frijolie> llutz: gnome-keyring-d  . the keyring? huh?
[18:55] <newbie> Not tinfoil know my internet is being tapped and there is spyware on my pc for the purpose of harrasment
[18:55] <DJones> orangeppop: I had a similar problem with an old laptop, I used the alternate install cd, then had to log into recovery mode before using the enable KMS solution in this website https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes
[18:55] <mkquist> newbie: who's doing that?
[18:55] <llutz> Frijolie: redo that with all listed pids
[18:55] <IsmAvatar> h00k: since it doesn't seem to be taking effect yet, maybe I should. How do I do that?
[18:55] <newbie> sigh can you just ignore the why please
[18:56] <orangeppop> DJones: Thanks, I'll try that :D
[18:56] <unop> notwist, in /etc/network/interfaces
[18:56] <h00k> IsmAvatar: perhaps 'killall pulseaudio' and then restart the application using the audio
[18:56] <DJones> orangeppop: Good luck, it was a bit messy, but solvable in the end
[18:57] <Frijolie> llutz, well it's funny because the external hard drive is off so how can it be "busy"?
[18:57] <orangeppop> DJones: Messy is usually more fun ;)
[18:57] <newbie> Are there any good programs for unbuntu for tracking internet routing and providing better network information then the default progam?
[18:57] <Frijolie> llutz, when I turn it on it mounts as something different "WD_320GB_". Is there something wrong with the first mount point or something?
[18:58] <jpds> newbie: You might want to ask
[18:58] <jpds> newbie: ... #ubuntu-server
[18:58] <[Spooky]> After i have installed Ubuntu 10.04 i only get a black screen with the first load... Is there any way to fix it?
[18:58] <llutz>  Frijolie "grep WD_320 /etc/mtab"
[18:59] <Frijolie> llutz, blank
[18:59] <philsf> hi, I can't get my bluetooth adapter to be recognized with Karmic's newer kernels. The last one I got it working it, was the 2.6.31 from beta stage. I also lost ability to use my wifi killswitch (which also works with the old .31) how can I debug this, so can I open a proper bug?
[19:00] <wpd> Hi folks... I would liketo be able to browse to http://mybox from a mixed environment of windows & macs.  What's the best way to advertise the hostname of my ubuntu box?  I have no control over the DNS server.  I've installed avahi, and can browse to mybox.local, but I'd like to eliminate the ".local" part.
[19:00] <abhijain> i want to connect internet with my tata photon data card can any one help me
[19:00] <IsmAvatar> h00k: still not getting sound :(
[19:01] <olimpia09> hola
[19:01] <IsmAvatar> (yes volume is turned up)
[19:01] <h00k> IsmAvatar: perhaps someone else would know :( sorry
[19:01] <IsmAvatar> no problem. Thanks anyways
[19:01] <olimpia09> quisiera saber como puedo ver un archivo .exe en mi ubuntu es que me aparece un error cuando lo ejecuto
[19:02] <Pici> !es | olimpia09
[19:02] <Firstgear> Anyone know the difference between nvidia-glx-185 and nvidia-glx-173. Is 185 a more updated version?
[19:02] <pericles> hi everyone
[19:02] <pericles> how to restore status icons in empathy  ?
[19:02] <kbrosnan> Firstgear: yes
[19:03] <pericles> I have the old ones
[19:03] <llutz> Frijolie: sorry no idea how to solve it, seem to be a gnome-diskmount issue
[19:03] <pericles> and I don't know why
[19:03] <Pici> Firstgear: Some older cards cannot use the newer driver.
[19:03] <pericles> help plz
[19:03] <IsmAvatar> h00k: I'm an idiot. Forgot to select USB audio in the sound prefs. It works now
[19:03] <Frijolie> llutz, well thanks for trying
[19:03] <[Spooky]> Anyone have any tip for me and getting into Ubuntu for the first boot after a install?
[19:03] <IsmAvatar> h00k: thank you for real this time
[19:04] <pericles> no one for empathy plz ? ? ?
[19:04] <OpenSourcedNick> How come I can't press SHIFT+O ? whenever I press it I don't get the letter O
[19:04] <orangeppop> DJones: The graphical installer is looking hopeful with the "i915.modeset=1" boot option - no need for alternative installer - so thanks for pointing me to that page! <3
[19:04] <olimpia09> let me know as I can see. exe file on my ubuntu is that I get an error when I run
[19:05] <pericles> where is empathy's icons folder  ? ?
[19:06] <philsf> hi, I can't get my bluetooth adapter to be recognized with Karmic's newer kernels. The last one I got it working it, was the 2.6.31 from beta stage. I also lost ability to use my wifi killswitch (which also works with the old .31). How can I debug this, so can I open a proper bug?
[19:09] <Xcell> why is dns so slow in firefox ?
[19:09] <scarra3> Is there a way I can connect my desktop threw my laptop to get internet access?
[19:09] <llutz> !ics | scarra3
[19:10] <airtonix> llutz, really needs to have a short python gui to setup the nat that UFW allows for
[19:10] <moonspell> Hello, when I try deleting an NTFS partition from gparted, it says kernel was unable to re-read partition table. I tried hdparm -z /dev/sda, I tried partprobe /dev/sda, I tried the solution here - http://ubuntuforums.org/showthread.php?t=1104414. Tried all these from the LiveCD too, nothing works
[19:10] <flaco> hi all.. I'm trying to configure a usb monitor as seconds monitor in ubuntu lucid... now.. where is the xorg.conf???
[19:11] <airtonix> llutz, http://www.nowhere.dk/articles/tip_nat_with_ubuntus_ufw_firewall
[19:11] <moreno> hi all
[19:11] <toffer> Hi, stumbled upon something weird (Ubuntu 9.10 Karmic, GDM 2.28.1): I can't make screenshots via Print-Button nor via GIMP or other methods because it always shows the GDM loading screen instead of the actual window. Any ideas?
[19:11] <llutz> airtonix: i just gave the link, i don't need ics
[19:11] <moreno> i'm new on ubuntu
[19:11] <ole> hi
[19:12] <airtonix> llutz, i understand this, im just passing it on out of 'wierd unrelated topic guy"
[19:12] <rafu> moonspell: try deleting it from the command line, you get better error messages
[19:12] <moreno> and i will know if the game : Prototype can run on ubuntu?
[19:12] <csxdfcsdfcsd> cdcdcdcdc
[19:12] <csxdfcsdfcsd> xsxsxsxsxsxsxs
[19:12] <llutz> airtonix: the manual way with iptables should still do , won't it?
[19:13] <Pici> csxdfcsdfcsd: stop that.
[19:13] <airtonix> llutz, most likely, but since UFW is the standard firewall for ubuntu I just thought it would be nice if there was a gui to do what that page describes... firestarter can cause some issues
[19:14] <Pici> airtonix: Does gufw provide that functionality?
[19:14] <airtonix> Pici, no.
[19:15] <airtonix> Pici, there was discussion, but the team said they dont want to mix the two workflows
[19:15] <Pici> airtonix: Well thats annoying :(
[19:15] <taelot> hi everyone. I have a quick 10.04 server question: can you configure existing raid arrays in the installer or do I have to manually edit fstab after installation? I don't want to wipe my existing array, but its not available in the partitioner (the individual partitions are, but the mdX device is not)
[19:15] <airtonix> indeed
[19:15] <moonspell> rafu: how? parted rm /dev/sda2?
[19:17] <wpd> I'm curious, what do "mode/#ubuntu [+o Pici] by ChanServ" and "mode/#ubuntu [+b *!*@csxdfcsdfcsd$#ubuntu-ops] by Pici" mean?
[19:18] <moonspell> rofu i ran gparted from gnome-terminal and it says the same thing.. "Kernel was unable to re-read partition table"
[19:18] <Maletor> I need to be able to get the hex color of something on my workspace. What is a 'color-picker' or eyedropper I can use with lucid?
[19:18] <Pici> wpd: I'd be happy to discuss in #ubuntu-offtopic , IRC modes and such aren't really on-topic for #ubuntu
[19:18] <Guest36412> anyone able to play the video in http://www.telkomspeedy.com/index.php?option=com_landingpage&landing=lp-webtv-baru#tsdc&Itemid=113 with google chrome? i cant
[19:19] <rafu> moonspell: tru running sudo mkntfs /dev/sda2, but be first sure that it is not mounted
[19:19] <rafu> mkntfs is part of ntfsprogs
[19:20] <Pici>  /mode -bo+b *!*@csxdfcsdfcsd$#ubuntu-ops Pici csxdfcsdfcsd!*@*$#ubuntu-ops
[19:23] <airtonix> Maletor, gcolor2
[19:23] <Maletor> got thanks airtonix
[19:23] <Maletor> what ever happened to gcolor1 ;)
[19:23] <Charbel> how can i make a new partition and format it to install windows ?
[19:24] <garrett__> Hi.  I just installed a new batch of updates under 10.04 (none of which appeared to be gnome-network-applet related), and now gnome-network-applet no longer has the context menus it used to.  If I right click, I no longer get a context menu where I can select the VPN I'd like to connect to, though if I edit connections, they're still listed.  Any ideas?
[19:25] <toffer> (asking again in case I was missed) Hi, stumbled upon something weird (Ubuntu 9.10 Karmic, GDM 2.28.1): I can't make screenshots via Print-Button nor via GIMP or other methods because it always shows the GDM loading screen instead of the actual window. Any ideas (besides uninstalling GDM)?
[19:25] <leena> howdy
[19:25] <leena> howdy
[19:25] <LovehinaX> hello
[19:26] <leena> Hi LovehinaX
[19:26] <LovehinaX> Im having some problems using a usb gamepad on Ubuntu Lucid
[19:26] <leena> what's that?
[19:26] <LovehinaX> a gamepad?
[19:27] <LjL> what driver should i installed for my Radeon 9600 (RV350) on Lucid? Jokey is coming up with a blank window with no proposed drivers.
[19:28] <philsf> hi, I can't get my bluetooth adapter to be recognized with Lucid's 2.6.32 kernels. The last one I got it working it, was the 2.6.31 from beta stage. I also lost ability to use my wifi killswitch (which also works with the old .31). How can I debug this, so can I open a proper bug?
[19:28] <Charbel> how can i make a new partition and format it to install windows ?
[19:30] <rafu> Charbel: use the ubuntu live cd, run gparted and create your partition
[19:30] <rdg> how is it my iPhone mounts and shows up in nautilus butwhen I run 'df' it doesn't show up
[19:30] <cluelessnewbie> If I boot up linux and only part of the screen boots up and I cant select anything my installation is screwed right?
[19:30] <Pici> LjL: I'd guess that you'd need to use the open source 'radeon' driver.  I have the x1400 (r520) and need to use it as fglrx no longer supports me.
[19:30] <angenoir> hi
[19:30] <cluelessnewbie> anything I can do to repair it? from outside ubuntu
[19:31] <LjL> Pici: hmm :|
[19:32] <alket> For 4 years i never had problem with ubuntu, but this 3 days it keeps freezing, i reinstalled it two times but it freezes  ?
[19:32] <cluelessnewbie> Its on a flash drive btw along with a rw partition
[19:32] <cluelessnewbie> any way to save the current setting?
[19:32] <Mrcheesenips> Alket, its probably your hardware then
[19:33] <LjL> Pici: anyway what's the deal with fglrx, is it no longer directly included in the repos? because xorg-driver-fglrx is just a redirect to "fglrx", which by the looks of it, seems like merely an installer for unpackaged stuff
[19:33] <alket> Mrcheesenips, which one, because im not familiar with any hardware ?
[19:33] <Hald> Hello
[19:33] <Mrcheesenips> Your computer itself alket
[19:34] <oasa> hi. I would like to have some extra options with my vga connected projector such as chaning the resolutions,duplicate,extend,desktop only on one etc. like u get in windows.. any idea where to?
[19:34] <oasa> i am using ubuntu lucid lynx (10.04)
[19:34] <Pici> LjL: 'fglrx' is the driver package.  Its just a deb package that holds the binary blob.
[19:35] <LovehinaX> Im having problems using a USB gamepad, the buttons are all wrong :(
[19:35] <alket> Mrcheesenips, I dual boot with xp , it doesn't freez
[19:35] <Hald> I have major problem with gl textures in programs like Tremulous and google earth. The texture is flickering. I'm runing Karmic and have a radeon 6700 m10 card
[19:35] <cluelessnewbie> Anyway to use my capser rw with a new installation?
[19:35] <LjL> Pici: oh ok. it was just the wording in the description that made me suspect otherwise.
[19:35] <Keith-BlindUser> I've gone and installed a few apps like VMware and such that create menus in Gnome on 64-bit Ubuntu Lucid Lynx.
[19:36] <Keith-BlindUser> I researched the bug report on Launchpad, and see that apparently it has to do with the menu items disappearing from those packages due to the menu cache not being updated. Does anyone know how to  update the menu cache so that the menu items for those types of programs don't disappear on logoff/reboot?
[19:39] <Hald> what could cause the texture in gl games to flicker?
[19:39] <edoceo> I cannot get cron to run my jobs, have added to /etc/crontab and used `crontab -e` (as root) to add jobs - still don't execute - no warnings in logs either
[19:39] <edoceo> Ideas?
[19:40] <edoceo> I have "15 11 * * *	root	/opt/edoceo/cella/cella.php show" in crontab and it don't run at 11:15am; have restarted/reloaded - still no go
[19:41] <ddeconti> switch
[19:41] <Kane_Hart> hey can most programs and such be compiled from one ubuntu system and then copied over to another without issues? or does it have to be compiled on each one
[19:41] <Pici> edoceo: If you are using crontab -e, you cannot include a field for username, it is not present in that context.
[19:42] <edoceo> Pici - I know; with crontab -e I did not include username; job did not run.  I moved to /etc/crontab and added user name; job did not run
[19:42] <edoceo> Other jobs in cron do run
[19:42] <Pici> edoceo: Is that file executable?
[19:43] <Kane_Hart> ./timer 10 100000 hey can most programs and such be compiled from one ubuntu system and then copied over to another without issues? or does it have to be compiled on each one
[19:44] <Pici> Kane_Hart: Short answer: Sometimes.
[19:44] <Kane_Hart> darn lol
[19:44] <Pici> Kane_Hart: It depends what architecture the computers are using, and what version the dependcies are.
[19:45] <Vooloo> doesnt firefox prism work with ubuntu?
[19:45] <eliotn> hello world!
[19:47] <MoonGlorious> world is afk atm
[19:47] <marcococos> hello. since when the default ubuntu install include the development tools?
[19:47] <Slither> hi
[19:47] <banker247> anyone familiar with setting up usb headsets in ubuntu10.4?
[19:48] <Slither> just plug it in
[19:48] <banker247> i did doesn't seem to be working
[19:48] <nacitar> I've installed amarok on an ubuntu server installation and the tray icon is showing up as a question mark, as if it couldn't find the icon... any clues how to fix it?
[19:48] <banker247> when i open skype i just see the standard puleaudio there and can't change it
[19:48] <Slither> os it sucks
[19:49] <Slither> what small monitor called
[19:49] <Slither> _
[19:49] <marcococos> banker247: connect the usb device and paste somewhere (pastebin for example) the 20 last lines of the command dmesg
[19:50] <Slither> dmesg
[19:50] <marcococos> can anyone please tell me since when does the default ubuntu install includes the development tools?
[19:50] <banker247> marcococos http://paste.ubuntu.com/448362/
[19:50] <Slither> small montir
[19:50] <Slither> monitor
[19:50] <Slither> what it called
[19:50] <Slither> like in die hard 4.0
[19:51] <Pici> Slither: Please use complete sentences and try to put your question all on one line.
[19:51] <Slither> line
[19:51] <Pici> marcococos: Why do you think that it does? Which 'development tools' are you referring to?
[19:51] <oCean_> Farkie[Away]: please don't use noisy away messages (like you were told before)
[19:52] <angenoir> I have a problem with my top dashboard with Gnome, and i'm wondering i'f theres a way to restore it by it's default ?
[19:52] <garrett__> Did the most recent kernel update disable the tun/tap device?
[19:52] <Pici> !resetpanels | angenoir
[19:53] <angenoir> thak you pici :D
[19:53] <marcococos> Pici: i mean build-essentials. i thought it didnt include, but more than 3 ppl have stated me that there is gcc on the default ubuntu install
[19:53] <marcococos> i see no point in including the development tools
[19:53] <Slither> usb monitor its like 10 cm its that just 4 se hard drive space
[19:53] <marcococos> banker, can you see if your device is detected under sound preferences?
[19:54] <banker247> it is
[19:54] <marcococos> so you just cant configure it on skype?
[19:54] <banker247> i can actually see the input level and the mic working but no sound
[19:54] <Pici> marcococos: 'gcc' is installed, but not necessarily the rest of the build-essential.
[19:54] <marcococos> so the mic is working but not the phones?
[19:54] <Slither> whits software will you use you mick to
[19:55] <marcococos> pici: oic... thanks for the info...
[19:55] <banker247> right
[19:55] <Pici> Slither: I don't understand what you are asking, does this actually have anything to do with Ubuntu?
[19:55] <marcococos> pici do know where can i find information on why is gcc installed by default?
[19:55] <Slither> yeah
[19:55] <Pici> marcococos: #ubuntu-devel I suppose.
[19:55] <Slither> sorry 4 me bad eng im swe
[19:55] <halfling> Anyone care for a Java/JSP question? I can't get into #Java and #programming is ignoring me...
[19:55] <Pici> !sv | Slither
[19:56] <Pici> !register | halfling
[19:56] <Pici> halfling: You need to register to join ##java
[19:56] <Slither> ah thx
[19:56] <halfling> okay
[19:56] <Slither> do they have a irc server
[19:56] <marcococos> pici thank you very much for the info
[19:56] <Pici> Slither: #ubuntu-se is on this irc network.
[19:57] <orangeppop> Hello again. I'm having trouble getting Ubuntu to install. It gets up to "Detecting file systems..." and then gets an error of "Input/output error during read on /dev/sda" - clicking ignore, it comes up 8 times before going away - and then it says "Failed to create a file system"; 'the ext4 files system creation in partition #1 of SCSI1 (0,0,0) failed. I then get "ubi-migrationassistant crashed" with exit code 141.
[19:57] <orangeppop> What should I do?
[19:57] <marcococos> banker: i have no clue on what is going on.. you should try to use the headphone as your normal sound card in ubuntu, and then try to setup it on skype.
[19:57] <banker247> tried it
[19:58] <banker247> wont work as normal sound card
[19:58] <banker247> thats the wierd part
[19:58] <marcococos> banker: i mean, skype was kind of bugged some time ago with pulseaudio
[19:58] <ddeconti> exit
[19:58] <Slither> the sound card is on your motherbord
[19:58] <marcococos> banker, maybe you could adjust the volume with alsamixer
[19:58] <marcococos> and press F6 to select the sound card or so
[19:59] <banker247> i can test input level with mic and it works
[20:00] <banker247> i see the slider going up and down as i talk
[20:00] <banker247> but.. no sound in the earpiece
[20:01] <jmacdonald> question about update-manager/releae-upgrades if i'm going from 9.04 to 10.04, I suppose I want to set Prompt=lts ?
[20:02] <kaspir> need helping setting installing ubuntu. partition can't be resized.
[20:03] <marcococos> banker, by default, you should not hear on the phones what you talk on the mic
[20:03] <banker247> right
[20:03] <banker247> i'm trying to play a utube video
[20:03] <banker247> every time i switch to th mic device sound doesn't work
[20:03] <edoceo> Pici, yes file is executable (0755)
[20:03] <marcococos> flash is also bugged with pulseaudio i think
[20:03] <marcococos> lol. try to play something on totem
[20:04] <f00bar80> in 10.04 how can i get/run vmware , tried apt-get install vmware not working
[20:04] <edoceo> Worst part is that cron appears to not even try to run that file
[20:04] <kaspir> need helping setting installing ubuntu. partition can't be resized.
[20:04] <kroson> people is the new flash 10.1 from adobe in the updates repo already?
[20:04] <Joker_-_> How can I encode h264 and xVid on ubuntu? I don,t understand how comes it's harder to encode some video footage of me and my GF to post on our website than pirate all the world's music...
[20:04] <jmacdonald> Joker_-_: use handbrake
[20:05] <jmacdonald> or menencode
[20:05] <orangeppop> I'm having trouble getting Ubuntu to install. It gets up to "Detecting file systems..." and then gets an error of "Input/output error during read on /dev/sda" - clicking ignore, it comes up 8 times before going away - and then it says "Failed to create a file system"; 'the ext4 files system creation in partition #1 of SCSI1 (0,0,0) failed. I then get "ubi-migrationassistant crashed" with exit code 141. I'm on an old 40GB ATA HDD, i
[20:05] <kroson> people is the new flash 10.1 from adobe in the updates repo already??
[20:05] <gothenburg> hmm
[20:05] <llutz> edoceo: tried calling it with explicit "/usr/bin/php /opt/..../file.php" ?
[20:05] <Joker_-_> jmacdonald: handbrake has it's own integrated encoder?
[20:05] <gothenburg> the xfce xubuntu default theme. Where can I download it?
[20:05] <trism> kroson: seems to be in lucid
[20:05] <loopidity> this file doesnt want to get deleted $WINDOWS.~LS
[20:06] <kroson> trism: updates, security (multiverse), is this repository enabled in lucid?
[20:06] <ActionParsnip> Joker_-_: handbrake is just a gui to mencoder / ffmpeg
[20:06] <loopidity> rm: cannot remove `$WINDOWS.~LS': Input/output error
[20:06] <kaspir> can somebody help me with setting up partitions with gparted. having issues resizes and creatin
[20:06] <acidchild> orangeppop: have you tryed rebooting? or making sure all devices are umounted first?
[20:06] <trism> kroson: it's in lucid-security/multiverse, 10.1.53.64ubuntu0.10.04.1
[20:07] <Pici> loopidity: escape the dollar sign with a backslash or enclose the entire thing in single quotes (not double quotes).
[20:07] <llutz> loopidity: rm '$WINDOWS.~LS'
[20:07] <banker247> oh got it to work
[20:07] <kroson> trism: so just update packages normally and i shall have it, or i need to enable a repo?
[20:07] <banker247> i'm in multimedia - kde control module
[20:07] <uLinux> Ubuntu Tweak channel?
[20:07] <gothenburg> noone?
[20:07] <f00bar80> any comment ?
[20:07] <n8w> the enter keyboard doesnt work under wine...anyone experiencin the same?
[20:07] <trism> kroson: should be there by default
[20:07] <loopidity> sudo rm '$WINDOWS.~LS'
[20:07] <loopidity> rm: cannot remove `$WINDOWS.~LS': Input/output error
[20:07] <kroson> ok :) tks
[20:07] <orangeppop> acidchild: How does one find out if a device is mounted, and if it isn't, how can I mount it?
[20:08] <kaspir> anyone...can somebody help me with setting up partitions with gparted. having issues resizes and creating
[20:08] <acidchild> orangeppop: 'mount' from command line...
[20:08] <acidchild>  i would just suggest rebooting the machine and restarting the process.
[20:08] <orangeppop> I'm rebooting now
[20:09] <acidchild> if that fails, try manualy cfdisking/mkfs.ext3 the disk... then atleast you will know if your harddrive is b0rk3d or its just something silly
[20:09] <yves10> paint
[20:09] <Joker_-_> ActionParsnip: then it's useless...
[20:09] <kaspir> please somebody help me with partition managing in gparted
[20:10] <oCean_> !repeat | kaspir
[20:10] <Joker_-_> ActionParsnip: I have tried many gui, even installed kde librairies to try kdenlive
[20:10] <simps> hi all. i was wondering if there was a financial stocks reader that is commonly used that is easy to read and simple and looks nice like the gnome-system-monitor?
[20:10] <yves10> \wc
[20:10] <yves10> ...
[20:11] <ActionParsnip> Joker_-_: it makes it easier for folks whom dont want to use cli for encoding etc
[20:11] <Joker_-_> ActionParsnip: the problem is that you just CAN'T encode h264 with ubuntu... You probably need to recompile something or get some better libraries.
[20:11] <kaspir> oCean: im having trouble resizing a partition with gparted on the live cd
[20:11] <Joker_-_> ActionParsnip: my problem isnt usage, my problem is that it's just not available.
[20:11] <_pg_> can someone comment on flash performance on ubuntu/lubuntu vs windows on same hardware?
[20:11] <Joker_-_> ActionParsnip: have you ever tryed to encode a video since you've been in lucid?
[20:12] <banker247> is there a reason skype isn't seeing my headphone? under options all i get is pulseaudio server(local) options
[20:12] <scales11> hi all, i just installed the CLI ubuntu and am trying to connect to a wireless network.  I can see my wifi card with iwconfig, but when i try "sudo iwconfig wlan0 essid network" the wifi card doesnt seem to connect
[20:12] <erUSUL> scales11: is wifi protected ( wpa/wep ) ?
[20:13] <Joker_-_> ActionParsnip: for some reason (probably because it's closed source), they recompiled all the libraries to have decoding only. No encoding.
[20:13] <scales11> erUSUL: unprotected
[20:13] <ActionParsnip> Joker_-_: i remember there being a 2 phase convert which could do it but its been about 2 years since I did it
[20:13] <kaspir> please somebody respond to my issue. I need help with gparted
[20:13] <erUSUL> scales11: "sudo dhclient wlan0" fails ?
[20:13] <Nakaori> heya, is there a way to startx with a fix resolution, without a monitor attached?
[20:13] <Nakaori> using 10.04
[20:13] <Joker_-_> ActionParsnip: two years ago... you where on lucid 2 years ago... wow :P
[20:13] <Joker_-_> ActionParsnip: it's broken since lucid. it was working fine in 9.10
[20:14] <ActionParsnip> Joker_-_: I see, then log a regression bug
[20:14] <Joker_-_> ActionParsnip: it's not a bug, it's a feature...
[20:14] <Joker_-_> ActionParsnip: it,s even listed.
[20:14] <scales11> erUSUL: yeah, also after i issue the command to connect, if i type iwconfig, the essid value is blank
[20:14] <gothenburg> Can I download the lucid lynx xfce theme?
[20:14] <Joker_-_> ActionParsnip: my question is, what do I have to do to have encoding in lucid
[20:14] <ActionParsnip> Joker_-_: i see, thats all i got dude, could try a different encoder
[20:15] <ActionParsnip> Joker_-_: read sample mencoder commands dude, the man pages will drive you insane
[20:15] <Joker_-_> ActionParsnip: I did, files are getting over 169mb for a 5 minutes video
[20:15] <ActionParsnip> Nakaori: use an xorg.conf file
[20:15] <oCean_> kaspir: try to describe your issue on one single line. Use details: versions, what are you doing, what is (not) happening etc. And only repeat after 10 minutes or so
[20:15] <Joker_-_> anyone here has ever done any video encoding in ubuntu lucid (10.04)?
[20:16] <trism> Joker_-_: you should be fine with handbrake, it includes it's own versions of ffmpeg as far as I know, which is why it isn't in the repo
[20:16] <Nakaori> ActionParsnip does it switch off autodetection then?
[20:16] <ActionParsnip> Nakaori: yes if an xorg.conf file exists it will override udev
[20:16] <Joker_-_> trism: yup, but it has no video editing function at all
[20:16] <Joker_-_> trism: I don't wanna rip dvds, I just wanna endit/encode some video footage
[20:16] <h00k> Joker_-_: Pitivi, OpenShot, etc. Check out the Ubuntu Software Center
[20:17] <Nakaori> ah okay thanks ActionParsnip ill try
[20:17] <trism> Joker_-_: can't help with that
[20:17] <Joker_-_> trism: hence my primary point: it's easyer to hack the whole world's softwares, music and movies than to edit and encode you own legit video
[20:17] <acidchild> Joker_-_: LiVE i believe its called
[20:17] <acidchild> you could give it a shot.
[20:17] <Joker_-_> acidchild: kdenlive?
[20:17] <kaspir> trying to install ubuntu 9.04 on a sony vaio but both bootable partition manager and gparted are finding an issue with the ntfs partition and will not resize/move said partition.
[20:17] <pietr> hello I need some help with ubuntu and VNC. when I connect to vnc, I see blank screen instead of my desktop. what em I doing wrong?
[20:17] <orangeppop> acidchild: Is it supposed to change the name of the drive? In one part of the installer, it is calling the drive sda1, but when it gets to installing, it calls it sda :S
[20:18] <Pici> !info lives | Joker_-_ acidchild
[20:18] <banker247> how to open kde multimedia control center?
[20:18] <acidchild> orangeppop: 'sda' = 'sata disk' A = the first disk...
[20:18] <gothenburg> where can I download this theme? http://chaostech.files.wordpress.com/2010/03/xubntu1004install1.png
[20:18] <Joker_-_> Pici: can't find it apparently.
[20:18] <acidchild> sda1 = 1 first partition.
[20:18] <Pici> Joker_-_: Try pitivi maybe?
[20:18] <Joker_-_> Pici: tryed it
[20:19] <Joker_-_> Pici: I tryed a load of em, honestly
[20:19] <Joker_-_> Pici: I always come here as a last resort
[20:19] <Pici> Joker_-_: You can't find the packages or they don't do what you want them to?
[20:19] <Joker_-_> Pici: at least 2 hours googling and lots of tries.
[20:19] <orangeppop> acidchild: Could it be the problem then that the HDD is an ancient IDE one?
[20:19] <Joker_-_> Pici: live isnt found by aptitude
[20:19] <Pici> Joker_-_: its lives, not 'live'
[20:19] <Joker_-_> ah
[20:20] <michal___> hello. can anybody help me with that: I need to strip path passes to the script. e.g. ~name/test so that it'll show all nodes -> /  /home  /home/name  /home/name/test
[20:20] <Joker_-_> Pici: thx for the correction, installing it.
[20:20] <Joker_-_> Pici: I'll tell you if it works
[20:20] <h00k> an aptitude search should have returned 'lives' if a search was done for 'life'
[20:20] <h00k> er, live
[20:22] <Joker_-_> Pici: there is multiple failures in the tests: cannon decode in png/alpha, cannot convert sound, cannot decode in jpeg.
[20:22] <Joker_-_> Pici: it says my mplay is out of date, but it's up to date according to aptitude...
[20:22] <Joker_-_> *mplayer
[20:23] <Pici> Joker_-_: I've never used these packages, I just know their names.  Maybe someone else has some suggestions?
[20:23] <kroson> hi ppl is the ubuntu x-swat ppa pretty stable?
[20:23] <Joker_-_> Pici: I'd tend to say that all the problems have the same root. I,ll give it a shot anyway.
[20:23] <vost> how can i see in which sda have suse install or ubuntu ?
[20:24] <padhu> How can i encrypt an file with my private GPG key and myfriend's public GPG Key
[20:25] <h00k> kroson: it's a bleeding edge repository, so probably not stable.  Also, if you install it, you won't be supportable with problems here
[20:25] <Joker_-_> Pici: Lives cannot open my video... lol
[20:25] <kroson> h00k: its the x-swat, not xorg-edgers
[20:25] <kroson> isnt the first considered stable?
[20:25] <vitium> how can I get my belkin f5d7011 pcmia card to work in ubuntu?
[20:25] <vost> how can i see in which sda have suse install or ubuntu ?
[20:26] <Joker_-_> nvm, I'll just forget about video editting.
[20:26] <ActionParsnip> kroson: its not very stable, but bleeding edge is kinda cool. i wouldnt advise it on a system you expect to work
[20:26] <vost> thanks lautriv
[20:26] <vost> how can i see in which sda have suse install or ubuntu ?
[20:26] <kroson> ActionParsnip: tks
[20:26] <ActionParsnip> vitium: what sort of device is it
[20:26] <vitium> ActionParsnip: A wifi card
[20:27] <vost> hello give my answer
[20:27] <ActionParsnip> vitium: can you give the output of: sudo lshw -C network     use http://pastebin.com to give the output
[20:28] <Vooloo> what logfile keeps track of SSH logins, port scans etc. ? It isnt syslog
[20:28] <padhu> How can i encrypt an file with my private GPG key and myfriend's public GPG Key
[20:29] <llutz> Vooloo: ssh-logins = auth.log
[20:29] <bastid_raZor> Vooloo: /var/log/auth.log
[20:29] <orangeppop> acidchild: 'cfdisk sda' in terminal should work, right? It comes up with a fatal error...
[20:29] <Vooloo> thanks, will it show nmap scans too?
[20:29] <Oejo> Hi al I have installed a third party app, a game called Oolite, it runs fine but when i shut down then restart the launch icon is gone and I cannot start the app. I reinstall it and all is fine, are there any settings I should be looking at for third party software? Running Lucid.
[20:29] <paolo_> Bye
[20:29] <banker247> does everyone remove pulse audio?
[20:29] <banker247> it seems to suck
[20:29] <ActionParsnip> banker247: works great here
[20:29] <orangeppop> The disk was working a few hours ago, I just had XP on it (looks like ubuntu has removed that though, but I did ask it to in fairness)
[20:30] <h00k> Oejo: since it's third party, you should probably check in with that application's support
[20:30] <banker247> ActionParsnip got my USB headset working with skype.. but the problem is.. when i talk to someone it comes through my computer speakers
[20:30] <ActionParsnip> banker247: i dont use skype
[20:30] <banker247> actionparsnip so my mic works.. but my headpiece isn't being selected as output when i'm talking
[20:30] <llutz> Vooloo: no
[20:30] <Oejo> hOOk I guess so :)
[20:31] <banker247> but i can do tests and single out my output on my headpiece so my headpiece does work
[20:31] <teddybearZ> Im having problems getting my gSmart mini3 webcam to work
[20:31] <Jordan_U> padhu: Generally you'd sign something with your private key, and encrypt it with his public key. That is, if your intent is to make something that only he can read, and that he can confirm was made by you.
[20:32] <prodcutnews1> asking ubuntu Q in ubuntu room.... whatz best  internet download manager for ubuntu 9.04 ?
[20:32] <Vooloo> llutz: know which log that is? I remember there used to be one that logged all tcp connections
[20:32] <h00k> !bestbot
[20:32] <Oejo> teddybearZ have you installed Kamoso?
[20:32] <h00k> !best | prodcutnews1
[20:32] <papertigers> anyone notice high cpu load with nfs?
[20:32] <ActionParsnip> prodcutnews1: there is no best app for anything in any OS
[20:32] <llutz> Vooloo: there is no such log by default (afaik)
[20:33] <banker247> padevchooser is pulse right?
[20:33] <teddybearZ> Oejo: no...I havent...
[20:33] <ActionParsnip> prodcutnews1: there are options, each with strengths and weaknesses but there is no best
[20:34] <Oejo> teddybearZ what are you using ?
[20:34] <padhu> Jordan_U: yes. what is the way to do this?
[20:34] <vitium> ActionParsnip: http://paste.ubuntu.com/448380/
[20:34]  * Crasher 
[20:34] <ActionParsnip> prodcutnews1: gwget is a download manager, i've seen people go on about jdownloader
[20:34] <ActionParsnip> !broadcom | vitium
[20:34] <teddybearZ> Oejo: Iv tried Camorama and Cheese
[20:34] <ActionParsnip> vitium: thought itd be a cheap broadcom ting :)
[20:34] <nacitar> I've installed amarok on an ubuntu server installation and the tray icon is showing up as a question mark, as if it couldn't find the icon... any clues how to fix it?
[20:35] <vitium> ActionParsnip: heh - any ideas?
[20:35] <Oejo> Kamoso works for me but canot use skype.
[20:35] <ActionParsnip> vitium: read the guide ubottu gave
[20:35] <prodcutnews1> yeh ... dont get me wrong ...i dont even started with any IDM in ubuntu, im not trying for poll here,  the use of word 'BEST' is a crime in the room
[20:35] <Vooloo> llutz: I see, maybe it is iptables log
[20:35] <teddybearZ> Oejo: okej
[20:35] <garrett__> Hi.  The behavior of the NetworkMonitor applet seems to have changed.  When I left click on it, I get the connection properties dialog, whereas I used to get a menu which allowed me to select which vpn i wanted to connect to.  Any ideas?
[20:35] <ActionParsnip> nacitar: why are you installing amarok on the server release? Why didnt you install the desktop if you wanted a desktop system?
[20:35] <h00k> prodcutnews1: it's not a crime, please use the information given to yo by ubottu :)
[20:35] <llutz> Vooloo: that needs special iptables logging-rules being active (they aren't default)
[20:35] <vitium> ActionParsnip: heh missed it - thanks for the info =)
[20:35] <garrett__> I can connect via the command-line, but it's a bit of a PITA
[20:36] <Jordan_U> padhu: http://www.dewinter.com/gnupg_howto/english/GPGMiniHowto-4.html
[20:36] <h00k> garrett__: please watch the language, acronyms count as well :)
[20:36] <garrett__> h00k: noted.
[20:36]  * Aeon_Dragon_ is searching for some friends who did organised a meet whit Diox
[20:36] <padhu> Jordan_U: thanks for your link
[20:37] <Jordan_U> padhu: You're welcome.
[20:37] <Pici> Aeon_Dragon_: Does this have to do with Ubuntu support?
[20:37] <nacitar> ActionParsnip: It's not a desktop system, it's forwarding X to another machine for a set number of applications.  However, if installing the "ubuntu-desktop" package would be the solution to amarok then that would mean amarok is missing a dependency somewhere along the way.  using the server release isn't "the problem".
[20:37] <Aeon_Dragon_> not realy
[20:38] <Aeon_Dragon_> i'll part sr for the troubs
[20:38] <Pici> Aeon_Dragon_: Then it would be better to ask in #ubuntu-offtopic or elsewhere.
[20:38] <ActionParsnip> nacitar: i'd log a bug then
[20:38] <zac_> Hey guys, can someone give me a command to lower the volume on rythmbox from a terminal, I need to bind it to a key
[20:38] <zac_> Or just alsamixer
[20:39] <Pici> zac_: You can assign keys to change the volume from System>Preferences>Keyboard shortcuts
[20:39] <zac_> Pici, No I can not these are on a mouse, I had to set it up through btnx
[20:40] <loopidity> cant delete $WINDOWS.~LS, even with single quotes
[20:40] <loopidity> its green colord with ls
[20:40] <Pici> loopidity: What if you do: rm \$WINDOWS.~LS
[20:41] <zac_> Hey guys, can someone give me a command to lower the volume on rythmbox from a terminal, I need to bind it to a key
[20:41] <loopidity> rm \$WINDOWS.~LS
[20:41] <loopidity> rm: cannot remove `$WINDOWS.~LS': No such file or directory
[20:41] <llutz> rm \$WINDOWS.\~LS
[20:41] <loopidity> this is so strange!
[20:41] <Nakaori> i just created an xorg.conf and it still doesnt start X without a monitor installed :/
[20:41] <loopidity> rm \$WINDOWS.\~LS
[20:41] <loopidity> rm: cannot remove `$WINDOWS.~LS': No such file or directory
[20:41] <teddybearZ> when I do "lsusb" I get: "Bus 003 Device 002: ID 055f:c520 Mustek Systems, Inc. gSmart mini 3 Camera", but I cant use the webcam :(
[20:42] <psusi> loopidity: what about ls \$WINDOWS.~LS?
[20:42] <Pici> loopidity: Can you please pastebin the output of ls -l in the directory where that files is?
[20:42] <trism> zac_: rhythmbox-client --volume-up/--volume-down maybe?
[20:42] <audifahrer> Hello
[20:42] <loopidity> ls -l \$WINDOWS.~LS
[20:42] <loopidity> -rwxrwxrwx 1 loopidity loopidity 5590 2010-06-11 21:09 $WINDOWS.~LS
[20:43] <loopidity> and its green
[20:43] <Pici> loopidity: Thats because its set +x.
[20:43] <loopidity> ok
[20:43] <psusi> loopidity: everything on an ntfs drive is green....  rm -fr \$WINDOWS.~LS
[20:43] <Purpley>  rtehteh
[20:44] <loopidity> psusi nop
[20:44] <audifahrer> I've the problem with 10.04 that if I open a Gtk+ application through ssh from another system that it shows the default theme. With 8.04 it adopted to the client Gnome theme. Any ideas why this happens?
[20:44] <BinariDragon> test
[20:44] <Slither> no themas wor k4 me
[20:45] <Pici> loopidity: I don't know what else to suggest, using a backslash to escape the $ works for me when I test it here.
[20:45] <Purpley> Can someone give me a command to change the volume in alsamixer?
[20:45] <Andorin> Anyone happen to know where Parcellite stores copied text?
[20:46] <ubutom> MyPaint works quite nice with Wacom Tablets, if someone is interested in pressure sensitive painting, with gimp it never worked for me
[20:47] <Vooloo> my temperature reading is not working, I have lm-sensors installed, anything else I need?
[20:48] <leena> howdy...
[20:48] <profxavier> :D
[20:49] <BinariDragon> leena, howdy
[20:49] <taggie> Hi everyone. Has anybody heard of problems booting lucid on an HP elitebook 2740p? When I boot to liveCD, get a usplash screen but then no GDM display. just blank screen. can't switch to text VTs or anything. does this with x86 and x64 live cds
[20:49] <exs> hi
[20:49] <Nakaori> ActionParsnip is there anyting i have to pay attention at? it seams to not load the xorg.conf i created with Xorg -configure
[20:49] <exs> i have a question. i installed apache2 with php5 and after a2enmod php5 php still not works. what is the reason?
[20:49] <ubutom> taggie, might take a while, how long have you waited?
[20:50] <BinariDragon> exs, use tasksel to install a lamp server
[20:50] <taggie> ubutom, a good 20-30 minutes
[20:50] <taggie> i'm using boot from usb, dvd does the same thing.
[20:50] <ubutom> taggie, ok, thats definitely too long
[20:51] <exs> wtf^^ BinariDragon
[20:51] <coldhandshake> hi
[20:51] <exs> i want a working apach2 with php support not a lamp server
[20:51] <BinariDragon> exs, i am telling u an easy way to intall apche and php all in one shot
[20:51] <coldhandshake> anyone experienced with Deluge?
[20:51] <ubutom> taggie, maybe some boot option wil help, like noapic and that stuff, don'T know the exact commands, but i'm sure someone in this room does :)
[20:51] <ActionParsnip> Nakaori: read some samples online, you will need to specify resolution and refresh rates
[20:52] <BinariDragon> nice way to say thank by the way
[20:52] <taggie> ubutom, tried two different machines, and all the bios options i could find.
[20:52] <ubutom> taggie, didnt mean the bios, did mean giving the live-cd some parameters on the way
[20:52] <Nakaori> ActionParsnip okay thank you
[20:53] <exs> ok php works in htdocs but not in userdir
[20:53] <Purpley> Can someone give me a command to change the volume in alsamixer?
[20:53] <BinariDragon> exs, are you trying to host a site or something? is so you should in webmin a the module call virtadmin or something like
[20:54] <taggie> ubutom, yeah, i just haven't done boot params in years, so i wouldn't know which would fix.
[20:54] <BinariDragon> but in order to configure the user dir i think you have to do that from apche
[20:54] <ubutom> taggie, but how that works with the modern cds i don't know, with the old it gave a screen before booting and they could be appended to the boot line
[20:54] <ubutom> taggie, same here :)
[20:54] <exs> BinariDragon: just localserver
[20:54] <guntbert> !webmin | BinariDragon, exs
[20:55] <taggie> ubutom, exactly :)
[20:55] <luislobo> hi, i'm quite indecisive about 64bit/32bit... currently I own a 64bit processor, but still work with 32bit ubuntu, red about the theoretical differences but still left with a big question mark... can you please advise ?
[20:55] <sechs> hello! Can I ask some questions about ubuntu?
[20:55] <BinariDragon> guntbert, i have to disagree , just have webmin install all the files for you
[20:55] <ActionParsnip> luislobo: if you have less than 3gb ram the 32bit is fine, if you do lots of encoding then 64bit will help, it will also mean you can install more than 3Gb ram without issue
[20:56] <ActionParsnip> !ask| sechs
[20:56] <BinariDragon> the old way was to have a deb package but now you can ust compile it
[20:56] <usr_> hello, I would like to know if it  is possible to have extended desktop in 3 monitors?
[20:56] <guntbert> sechs: this channel is for ubuntu support - so if they are support questions please do
[20:56] <sechs> Thank you, im new with linux, and I'm having a lot of problems...
[20:56] <LinuxAdmin> hi guys
[20:57] <luislobo> ActionParsnip, I have 8GB ram and enabled highmem support in kernel... my profile is developer/digital audio workstation...
[20:57] <darko3d> hello, kde is not working for me, i get to loading page but then the page goes black
[20:57] <guntbert> BinariDragon: be warned - webmin can break your system configuration - and please don't recommend it to others
[20:57] <LinuxAdmin> I'm wondering how kernel works on ubuntu
[20:57] <BinariDragon> usr_, yes you will need 2 dual video card with the same chip set
[20:57] <ActionParsnip> luislobo: 6whats a digital audio workstation, like audio mixing etc?
[20:57] <sechs> First, I think I have some problems with java aplications, or with flash, because often, my desktop gets freeze, and i have to make a manual reestart.
[20:57] <Purpley> Can someone give me a command to change the volume in alsamixer?
[20:57] <LinuxAdmin> I've got background in Slackware, where I had to compile everything by hand
[20:57] <darko3d> i can still here everything and when i click on the power button i get the options windows but nothing else
[20:57] <darko3d> so how do i set up kde?
[20:57] <teddybearZ> My webcam: "gSmart mini3" is supported in ubuntu, but I cant get it to work :( Can anyone help me?
[20:58] <sechs> i think this is a problem with firefox, but im not sure
[20:58] <luislobo> ActionParsnip, ardour, jack, rosegarden... high resolution timer, lots of memory
[20:58] <sechs> i have ubuntu 10.04 lts
[20:58] <LinuxAdmin> I like having ubuntu upgrade my kernel automaticaly, but I like to undestand how my system works
[20:58] <Nematocyst> Any idea why disk check took so long?  took 3 hrs from start until login screen.  running 10.04 x86 in a VM.
[20:58] <sechs> i thought this will work fine, but i cant use it for a long time
[20:58] <h00k> !kernel | LinuxAdmin
[20:59] <guntbert> !enter | sechs
[20:59] <LinuxAdmin> ubottu: I've read that already
[20:59] <darko3d> does anybody here recommend a good firewall for ubuntu
[20:59] <usr_> BinariDragon, I see. I have 2 video outputputs from my mother board and an nvidia video card. How can I know if they have the same chipset? I think they dont though
[20:59] <BinariDragon> guntbert, let the user decide is they want to do it or not, lets  limit there options here, well now how painful it is to configure a lamp server
[20:59] <sechs> ok thank you, im sorry
[20:59] <BinariDragon> lets not limit***
[21:00] <misse-> darko3d: iptables, but I guess if you want a GUI for it: firestarter
[21:00] <Purpley> Can someone give me a command to change the volume in alsamixer?
[21:00] <ActionParsnip> Purpley: http://crunchbanglinux.org/forums/topic/7972/solved-change-volume-from-command-line/
[21:00] <guntbert> BinariDragon: just don't recommend webmin in this channel
[21:00] <LinuxAdmin> I'm trying to understand the diference between linux-headers and linux-kernel (I think this is the name)
[21:00] <luislobo> sechs, random freezes are normally related to bad ram or faulty processors
[21:00] <LinuxAdmin> linux-headers is a full kernel?
[21:00] <freud> anyone good with tomcat?
[21:01] <luislobo> LinuxAdmin, no ... just the headers (.h)
[21:01] <BinariDragon> ok
[21:01] <luislobo> LinuxAdmin, .h = specification , .cpp = implementation
[21:01] <teddybearZ> I just dont get it: "Bus 003 Device 002: ID 055f:c520 Mustek Systems, Inc. gSmart mini 3 Camera" and I still cant use it in any program :(
[21:01] <LinuxAdmin> I now I can compile linix-headers has I compile a normal kernel (make menuconfig)
[21:01] <ActionParsnip> LinuxAdmin: its just the files to allow you to make kernel modules really, linum-image-2.xxxxxxx  is the actual kernel
[21:01] <phylock> freud - depends
[21:01] <LinuxAdmin> so, I thought it would be a full kernel
[21:01] <darko3d> so what the alternative for domain controller in ubuntu server edition
[21:01] <luislobo> LinuxAdmin, no... to compile modules/kernel dependant stuff you just need the headers
[21:01] <phylock> !ask | freud
[21:02] <BinariDragon> usr_, maybe my friend google can help:)
[21:02] <sechs> i have 1gb ram, and a p4 3800 processor, i know that's not the best for it, but i thought that it would work. May i have to install an older version of ubuntu? Sorry for my bad english >__<
[21:02] <usr_> :(
[21:02] <cyborgsmurf> why do I always get these weird problems in Ubuntu...
[21:02] <LinuxAdmin> if I make any change with "make menuconfig" will my ubuntu continuing to update my kernel automaticaly?
[21:02] <freud> phylock: i installed tomcat6 from aptitude, server is running, but shutdown script not working, and no auto deploy...
[21:03] <pietr> hello, I have problem with lagging ssh server on new ubuntu 10.04. have you experienced simmiliar problems? where to look for solution?
[21:03] <luislobo> LinuxAdmin, you are really putting questions that cannot be answered in a IRC channel
[21:03] <ActionParsnip> LinuxAdmin: sure but they will not use the options you define for your custom kernel
[21:03] <luislobo> LinuxAdmin, compiling the kernel is a complex process that needs some background
[21:04] <hdon> hi all. i'm trying to install skype to lucid. in Software Sources i have enabled two sources:
[21:04] <hdon> http://archive.canonical.com/ubuntu karmic partner
[21:04] <hdon> http://archive.canonical.com/ubuntu karmic partner (Source Code)
[21:04] <darko3d> so what the alternative for domain controller in ubuntu server edition
[21:04] <LinuxAdmin> I've got that backgound, I compiled dozens of kernels from scratch
[21:04] <ActionParsnip> luislobo: its not that complex
[21:04] <freud> phylock: is there a auto deploy trick i'll have t do?
[21:04] <luislobo> LinuxAdmin, your best shot in ubuntu is to google for : compile kernel ubuntu way
[21:04] <hdon> but even after apt-get update (or what i assume Reload button does after i close Software Sources) i do not see Skype!
[21:04] <cyborgsmurf> Ubuntu: Lbreakout2 editor, goodies arent displayed, why?
[21:04] <luislobo> ActionParsnip, for me or someone who did it before it's really not
[21:04] <darko3d> how do i setup kde ?
[21:04] <ActionParsnip> !skype | hdon
[21:05] <woodworks> i see helpers asking all the time "did you do an upgrade or fresh install?", is an upgrade not a good option? I have dial-up and downloading an ISO is a two day affair...
[21:05] <LinuxAdmin> I'm not a newbie, I'm just trying to undestand the relationship beteew ubuntu and kernel
[21:05] <akSeya> hi there
[21:05] <ActionParsnip> luislobo: i started Linux on gentoo, learned a lot andits not hard, just takes a tiny bit of reading
[21:05] <hdon> ActionParsnip, i am reading instructions from https://help.ubuntu.com/community/Skype already! those instructions are what have lead me to this path, but the "skype" package still does not appear!
[21:05] <luislobo> ActionParsnip, been there :)
[21:05] <LinuxAdmin> with other distros I compiled everything from scratch, now I see ubuntu upgrading the kernel automaticaly
[21:06] <misse-> woodworks: my experience is that it depends on how much you've "tweaked" your install. a default install upgrades just fine mostly
[21:06] <ActionParsnip> luislobo: http://linux.dipin.info/2010/01/how-to-install-skype-on-ubuntu-1004.html
[21:06] <sechs> I read that my problem would solve not using gnome, its that true?
[21:06] <HsH> hdon, 10.04==lucid, not karmic
[21:06] <akSeya> i had a problem once, that init.gz took too long to load. I remember, you guys told me to add something on menu.lst ..  any idea what could it be?
[21:06] <luislobo> LinuxAdmin, my way of doing kernel in ubuntu is to create a kernel package bundle (headers+linux+source)
[21:06] <guntbert> hdon: what ubuntu version are you running?
[21:06] <ActionParsnip> luislobo: found that in 55 seconds
[21:06] <luislobo> ActionParsnip, skype ?
[21:06] <woodworks> misse- ah, that makes sense, was wondering why there would be upgrade if its not recommended
[21:06] <misse-> woodworks: isn't an online upgrade over dial-up just as timeconsuming? I would prefer a one-time download that can be reused
[21:06] <cyborgsmurf> Ubuntu: Lbreakout2 editor, goodies arent displayed, why?
[21:06] <ActionParsnip> hdon: sorry. see above ^
[21:06] <phylock> freud - auto deploy?? how do you restart the service?? sudo service tomcat6 stop or the script directly
[21:06] <hdon> HsH, i don't understand, where was any hint of ubuntu version mentioned except where i said "karmic?" please explain :)
[21:07] <hdon> guntbert, i just upgraded to Lucid
[21:07] <hdon> is ekiga based on gstreamer?
[21:07] <LinuxAdmin> I know how to compile a kernel in ubuntu, but I couldn't undestand yet if I can get automatic kernel upgrade if I make some changes
[21:07] <woodworks> misse- don't know about timing yet, just getting prepared, upgrading to dedicated line next week (high speed not available in my area)
[21:08] <LinuxAdmin> I try to explain what happened to me
[21:08] <taggie> Anybody try to install/run live on an HP 2740p tablet laptop? I get blank screen after usplash, no GDM/X. 386 or x64, same behavior
[21:08] <misse-> woodworks: for me; I usually save my settings for apps which I edit the config for a lot and then do a fresh install (leaving my data-partition intact of course)
[21:08] <freud> phylock: there are scripts in a /bin folder that are supposed to shutdown/startup the tomcat server...i'll just google some more
[21:08] <misse-> woodworks: that's too bad with your connection and all, where're you from?
 hi all. i'm trying to install skype to lucid. in Software Sources i have enabled two sources:
 http://archive.canonical.com/ubuntu karmic partner
 http://archive.canonical.com/ubuntu karmic partner (Source Code)
[21:08] <llutz> LinuxAdmin: you won't unless you name your own kernel exactly as the shipped one. and in that case, your changes were lost
[21:08] <LinuxAdmin> I had OCFS2 on top of DRBD on my cluster node
[21:08] <woodworks> misse- kentucky hills
[21:08] <guntbert> hdon: did you add the partner repo? then "reload"?
[21:08] <greenjon> HsH: beat me to it. thanks lol
[21:09] <hdon> HsH, yes, oh, you're right. hmm! i guess upgrading did not upgrade my sources.list?! HOW could it not upgrade my sources.list???
[21:09] <phylock> freud - what if you start it as a service "sudo service tomcat6 stop"
[21:09]  * hdon upgraded via the Software Update GUI
[21:09] <LinuxAdmin> last week I decided to restart my server and DRBD haven't started
[21:09] <cyborgsmurf> can anyone help me with my LBreakout2 problem?
[21:09] <LinuxAdmin> so, my cluster was down
[21:09] <misse-> woodworks: uhm, kentucky as in U.S.?
[21:09] <rww> hdon: because partner repositories are disabled by default, and the upgrade tool sees disabled repositories as comments and ignores them
[21:09] <hdon> ahhh
[21:09] <usr_> I cant refresh youtube videos nor use the bottom bar inside the video screen. How can I fix that?
[21:10] <guntbert> hdon: "other" repos normally get disabled during an upgrade and you should adapt them later
[21:10] <hdon> rww, thanks for the help
[21:10] <LinuxAdmin> I realized that was a problem with DRBD module, it couldn't load
[21:10] <hdon> and to others :)
[21:10] <freud> phylock:sure thing...
[21:10] <Purpley> How do I launch firefox from a command?\
[21:10] <mmfb> I'm very fresh into Linux use and I'm looking for a Xubuntu help server here in IRC. Does anyone know if there is one, and how I can access it?
[21:10] <luislobo> LinuxAdmin, so you want to disable automatic kernel upgrade ?
[21:10] <woodworks> misse- yep, cell phone is still 2g, copper based tele lines, sat is only hi speed option
[21:10] <hdon> ok i fixed my sources.list thank you all :)
[21:10] <sechs> sorry, shall i repeat my question? if I install an older version of ubuntu, my problem will solve? or quiting gnome?
[21:10] <hdon> i see skype package now
[21:10] <rww> mmfb: you can ask Xubuntu questions here or in #xubuntu
[21:10] <LinuxAdmin> so, I configured GRUB to use older kernel version and everything is working again
[21:10] <gothenburg> which font is default in ubuntu?
[21:10] <LinuxAdmin> I don't want to disable kernel upgrade, ofcourse not
[21:11] <misse-> woodworks: wow :/ I live in sweden. Grew up in a town of 10.000 people. got ADSL in like.. 99-00
[21:11] <LinuxAdmin> but I can't have DRBD working with the recent kernel
 sans
[21:11] <gothenburg> HsH: ok
[21:11] <freud> phylock:still  wonder why the scrpt don't work, but that's another question...one more forya, i've entered new users in the users.xml, but they don't get recognized(manager role)
[21:11] <misse-> woodworks: and now they're installing a MAN in my mothers house
[21:11] <greenjon> sechs: i'd say go ahead and repeat the question. maybe someone will see it and help you out that didn't see it before
[21:12] <cyborgsmurf> no?... okay... how can it be that I can type åäö (swedish letters) here but not in browser-search-window
[21:12] <gothenburg> åäö
[21:12] <LinuxAdmin> I think package managers would deal with this kind of dependencies, I can't undestand how I couldn't start a module just because a kernel upgrade
[21:12] <greenjon> woodworks: i'm right there with you on the being stuff with sat for internet :/
[21:12] <gothenburg> cyborgsmurf: för att svenska är lamt
[21:12] <mmfb> I'm having trouble running Wine under Xubuntu 9.10. Everytime I try to run a game it is VERY slow, even with older games. Ex. Wolfenstein: Enemy Territory
[21:12] <LinuxAdmin> wouldn't apt-get be smart enough to deal with this?
[21:13] <woodworks> misse- well, its wierd 1/2 mile away is fiber optic cable, but we are on a spur road and no plans by phone company to upgrade for at least 6 months, closest town is 12 miles away
[21:13] <cyborgsmurf> gothenburg: tack, det hjälpte verkligen... inte
[21:13] <jmreicha> what's the best way to become linux sysadmin?
[21:13] <usr_> I have problems with flash player on firefox, I cannot adjust the timing in youtube videos and any icon inside the video screen cannot be selected
[21:13] <phylock> freud - there is some problems with CATALIN something path you have to fix, but thats a loong time ago and i don't remeber exactly how.
[21:13] <misse-> mmfb: are you sure you've installed the proper graphics driver? And are you starting wolfenstein with an -opengl switch (if supported)?
[21:14] <MeanEYE> evening! :D
[21:14] <rww> LinuxAdmin: it's not apt-get's job to deal with module upgrades, it's the kernel and module packages'. If your module doesn't use dkms, it isn't going to get autorebuilt by the kernel package scripts.
[21:14] <usr_> how can I know which video cards I have on my pc?
[21:14] <misse-> woodworks: half a mile? Sounds like someone might be able to solder on a cable of his own and draw the fibre along the powerlines :P
[21:14] <LinuxAdmin> I solved my problem, I used older kernel and I'm praying that next upgrade to the kernel has got this dependencies solved
[21:15] <BluesKaj> usr_, in the terminal , lspci | grep VGA
[21:15] <freud> phylock: thanks for the help, i'll just study the docs some more :) BTW the stop service worked off course
[21:15] <usr_> BluesKaj, thanks
[21:15] <guntbert> Purpley: type firefox
[21:16] <sechs> ok, thank you. I repeat all. I have ubuntu 10.04 lts, and i have problems, it gets freezed, and i have to reestart manually, I have a p4 3800 processor, and 1 gb ram, and a nvidia graphics, gforce 5500 fx, and all worked fine with windows, but i dont want to use it anymore. I read about my problem starts with some apps, like java or flash, with firefox, I read too that gnome has some problem too. I dont know. Maybe if I install an older
[21:16] <sechs> version of ubuntu may it works, but I like the use of this operating system. Some solutions?
[21:16] <mmfb> A friend of mine set up Xubuntu for me and I'm not sure how to run Wolfenstein with an opengl
[21:17] <Purpley> Is there a way to bind buttons that arent detected by keyboard shortcuts?
[21:17] <Aquina> lol
[21:17] <gee> sechs. sind sie deutsche?
[21:17] <sechs> gee, what? i dont understand... Im spanish
[21:17] <misse-> Purpley: yeah, xev is used for detecting the keycode.. guess you can google "bind keys xev"
[21:17] <gee> ah lol, your name is german for 6
[21:18] <sechs> gee i know hehehe, its from a comic.
[21:18] <gee> sechs have you tried installing the nvidia driver?
[21:18] <sechs> yeah, I install it. but didnt work better
[21:18] <misse-> gee: the german word for 6 is pronounced almost exactly like the swedish word for 6, which is spelled "sex"
[21:18] <usr_> I added a GTX GeForce 260 videocard to my pc but the videocard on the motherboard is not being recognized. Can I use both video cards and have extended desktop for three monitors? This is what lspci showed me:  http://pastebin.com/BJ7nsfLm
[21:18] <Aquina> mmfb, Wolfenstein is a game written for Microsoft Windows. In that case you have to install a so called Compatibility Layer (not an emulator). WINE is the most popular one. Open a terminal and enter "sudo apt-get install wine". Then install Wolfenstein from CD.
[21:18] <Purpley> misse-, because btnx detected my mouse but wont lower the volume when I set a button to execute amixer set Master 10%- > /dev/null
[21:18] <emhs[work]> Anyone got a minute to help me debug my samba setup under 10.04 Ubuntu Desktop (x86)?
[21:19] <Aquina> gee, ich spreche Deutsch.
[21:19] <misse-> Purpley: does btnx still work in ubuntu? I thought not
[21:19] <Seta2501> omg my ubuntu is useless
[21:19] <misse-> Seta2501: how come?
[21:19] <ubutom> misse-, actually the englisch word is spoken just that way too
[21:19] <gee> aquina tut mir leid aber ich bin schota lol
[21:19] <woodworks> misse- i contacted them about running fibe, even volunteered to do the install, they were gonna go for it then said it would cost me $4,000 USD for materials
[21:19] <Purpley> misse-, I thought it did
[21:19] <freud> phylock: http://oreilly.com/java/archive/tomcat-tips.html seems to have the answers
[21:19] <guntbert> !ot | gee
[21:19] <emhs[work]> I've tried the guides, I've tried the obvious stuff, I really need someone familiar with it to help think of NON-OBVIOUS things to try in pursuit of making it work.
[21:19] <Seta2501> cuz i cant get it to keep a wifi connection and i cant get it to install apps
[21:19] <JusticeZero1> Boot stops before it gets to login asking... something, but I can skip mount or manual something - it's a couple lines of text overlapping. suggestions?
[21:19] <Aquina> gee was ist ein "schota"?
[21:20] <misse-> woodworks: for materials? how can half a mile of fibre cable and 2 connectors cost that much?
[21:20] <emhs[work]> Never had this trouble in 9.10 Server
[21:20] <NerfHerder> Hey anyone know of a good channel for news/talk/science/tech/etc.?
[21:20] <guntbert> Aquina: please keep to the topic
[21:20] <woodworks> misse- i think i was being blown off actually
[21:20] <Purpley> NerfHerder, Offtopic but G4TV
[21:20] <gee> aquina scottish. anyway. sechs when does your pc normally crash?
[21:20] <MeanEYE> emhs[work], priv?
[21:20] <misse-> ubutom: uhm, the english word for sex yes, the english word for 6 is pronounced six :P
[21:21] <mmfb> I've installed Wine 1.2 rc2 and I have the Wolfenstein  exe file already installed. But when running Wolfenstein it is painfully slow. Unplayable, actually. The game runs fine on my laptop which is running XP MC SP2 that has slightly lower specs.
[21:21] <Aquina> Seta2501 try to use a wired connection to connect to your LANs router. CAT 5 patchcables work flawlesly with Ethernet adapters since the're supported out of the box in most cases.
[21:21] <sechs> gee: it get crashed when i use internet for a long. Thats why I associated it With java, flash and firefox
[21:21] <ubutom> misse-, woodworks if there is fibre channel and they use the old copper lines for the last part of the road they have to install a think that's could an outdoor dslam, it's pricey and maybe that's the cause they are doing it slowly
[21:21] <Seta2501> i dont have internet. i baught this laptop so i could use free internet at hotspots
[21:21] <misse-> woodworks: yeah sounds like it.. my mom's paying about 3000$ for the install including materials and installation. She has to prepare a cable channel from the road to the house (5 meters)
[21:21] <JusticeZero1> grr.. also, laptop in question's wireless is shaky.
[21:21] <gee> sechs guessing there are java and flash objects on the screen then? not something i have heard of
[21:22] <ubutom> misse-, yeah, lol, mixed that up
[21:22] <sechs> gee: but i think too that it's when my pc gets so hot. I think that some application gets a lot of processor. or something
[21:22] <ubutom> *thing that'S called.. geez, I'm tired :D
[21:22] <gee> sechs could just be your pc cutting off when it gets too hot then?
[21:22] <JusticeZero1> *hasn't seen any reply if there was one*
[21:22] <misse-> ubutom: ^^, that's my point.. The swedish (and deutsch) word for 6 is sounds the same as the Eng word for sex. Swedish word for sex to.
[21:22] <sechs> gee: maybe. But i never had that problem before.
[21:23] <guntbert> !ot | misse-
[21:23] <sechs> gee: i used to use windows XP and usually I use photoshop, and other heavy apps, and never gets hot.
[21:23] <misse-> guntbert: sry.
[21:23] <ubutom> misse-, maybe they use the i because of prudery? :D scnr
[21:23] <Aquina> guntbert I think you're not an operator next time I'll complain about you.
[21:23] <gee> sechs google your computer model (if its not a custom build) with the word ubuntu, see if anyone else is having similar problems
[21:23] <trexyz> how can i close a remote session
[21:24] <badnaam> hello all
[21:24] <trexyz> ?
[21:24] <misse-> trexyz: what kind of remote session?
[21:24] <Meshezabeel> There used to be memtest on previous Ubuntu live CDs before loading up the system, is this possible anymore?
[21:24] <sechs> gee: i dont want to use windows nevermore, but im having a lot of problems, and i dont have any idea to solving them
[21:24] <badnaam> my dvd burning is extremely slow, can anyone help me with this?
[21:24] <trexyz> ssh
[21:24] <datta> my top bar is missing, can anyone help me get it back?
[21:24] <sechs> gee: it a custom model
[21:24] <gothenburg> :D
[21:24] <sechs> gee: I have changed some things with the years
[21:25] <gee> sechs i know your pain haha, i wish i could get rid of window$, getting close now with ubuntu 10.04.
[21:25] <misse-> trexyz: your ssh session or someone elses?
[21:25] <gee> sechs maybe look up your motherboard model
[21:25] <trexyz> is mine
[21:25] <ultimaexodus> My webcam is clearly indentified as: "Bus 003 Device 004: ID 055f:c520 Mustek Systems, Inc. gSmart mini 3 Camera", yet I cant use it in any program. Can anyone help?
[21:25] <trexyz> but is from
[21:25] <h00k> Aquina: guntbert was correct in calling !ot
[21:25] <delac> can anyone tell if the next ubuntu (meerkat) will reintroduce settings for Indicator  Applet Session? (I'm mostly concerned about the "don't ask password" setting)
[21:25] <badnaam> can someone help me with slow dvd burning
[21:25] <trexyz> other ip address
[21:25] <ubutom> badnaam, depends on the speed the disc supports and soemtimes it's better to burn on lowest possible speed anyway, because it produces less faulty discs
[21:25] <sechs> gee: now Im doing. thanks i tell you what saint google says
[21:25] <llutz> ultimaexodus: being identified on usb-bus doesn't mean anything if theres no driver to handle it
[21:26] <badnaam> ubutom the same disc on teh same drive burn much faster on windows 7
[21:26] <gee> sechs ok, could just be an incompatibility
[21:26] <mmfb> Reposting because it probably got lost in the crowd: I've installed Wine 1.2 rc2 and I have the Wolfenstein exe file already installed. But when running Wolfenstein it is painfully slow. Unplayable, actually. The game runs fine on my laptop which is running XP MC SP2 that has slightly lower specs.
[21:26] <Aquina> mmfb, unfortunately games run slow sometimes when using WINE. The call translations consume more computing time. Have you checked the AppDB on winehq.org for Wolfenstein?
[21:26] <Kentrel> how do I redirect the output of grep to a file so that the search terms are also color encoded, with ANSI or whatever bash uses
[21:26] <badnaam> somewhat slow might be fine but this is painstakingly slow
[21:26] <ultimaexodus> llutz: what do I need to do to make it work?
[21:26] <ubutom> badnaam, maybe you got dma disabled in ubuntu
[21:26] <Seta2501> k ill try somewhere else this place is too busy
[21:26] <gee> mmfb are you talking about return to castle wolfenstein?
[21:26] <badnaam> ubutom how do I find out and enable it?
[21:26] <BluesKaj> ubutom, less faulty or fewer faulty  ?  :)
[21:26] <trexyz> misse- do you know a solution?
[21:26] <mmfb> Yeah, but the multiplayer only version; Wolfenstein: Enemy Territory
[21:26] <urlwallace> dont boot with EVGA brand usb third monitor connection plugged into usb.  It just corrupted my ubuntu 10.4..must reinstall...sigh
[21:27] <misse-> trexyz: you can do a number of things. from the session: typ "exit". from outside the session: ps auz|grep sshd to find the process associated with the session and then kill it with "kill <process number>"
[21:27] <ubutom> BluesKaj, more unfaulty :P
[21:27] <mmfb> aquina: No, I haven't. But I'll do that now.
[21:27] <trexyz> misse- thx
[21:27] <gee> mmfb there is a linux version. you wont need the .exe (thats a windows file). look up the linux one
[21:27] <ubutom> badnaam, should be adjustable with hdparm
[21:27] <rellis> you claim a monitor corrupted your entire os?
[21:27] <rellis> that sounds pretty unlikely
[21:27] <ubutom> !dma | badnaam
[21:27] <BluesKaj> less faultry implies they're all faaulty some less faulty than others \
[21:27] <urlwallace> well
[21:28] <Aquina> datta you can run "gnome-panel &" fom a shell. To spawn one right click on your desktop - the menue will help.
[21:28] <badnaam> ubutom hdparam?
[21:28] <ubutom> BluesKaj, well, who knows? :D The discs are not always the same quality
[21:28] <badnaam> oh ok I see, let me look through the docs, thanks!
[21:28] <urlwallace> I havnt had problems before ..with several diag boots non gui it freezes at usb audio
[21:28] <ubutom> yw
[21:28] <Aquina> h00k, what do you mean by "correct in calling"?
[21:29] <urlwallace> tried rebooting with an older grub alaso
[21:29] <h00k> Aquina: guntbert was correct for calling !ot, regardless if op status or not.
[21:29] <mmfb> I went to LGD and it gave me the link to that .exe file. Not sure why. I just thought that some of the game on LGD just assumed you had Wine or a similar program.
[21:29] <BluesKaj> ubutom, my wife is an english teacher , she corrects me for that mistake all the time :)
[21:29] <KenBW2> Is it possible to have my .profile folders somewhere other than ~/
[21:29] <gee> mmfb there is defanetly a linux version. i used it before
[21:29] <sechs> gee: maybe is a problem with drivers? but I dont know how to install them!!
[21:29] <ubutom> BluesKaj, hehe, well, she has to know :D
[21:29] <rellis> urlwallace.. certainly sounds totally unrelated to monitor config
[21:29] <gee> sechs yeah thats most likely your problem
[21:30] <mmfb> Ah, I found it.
[21:30] <urlwallace> thanks rellis Ill troubled shoot in that direction
[21:30] <gee> mmfb good :)
[21:30] <Meshezabeel> nm, guess I had to press ESC to access the old Ubuntu menu
[21:30] <sechs> gee: arghhhhhhh i hate that >__< i will try now
[21:30] <mmfb> gee: thank you very much.
[21:30]  * BluesKaj stops trolling for grammaticals
[21:30] <gee> mmfb no problem
[21:30] <sechs> gee: maybe at synaptic i could found them?
[21:30] <misse-> KenBW2: it's possible I guess, but what do you want to achieve?
[21:30] <test1_> Hey, sorry for asking this here, but was wondering if anyone could tell me any pros and cons over ubuntu/mint vs. pclinuxos? and of course, gnome vs kde in both cases. please message me. thank you.
[21:30] <gee> sechs i had to make a driver from scratch for a wireless card before...that was fun
[21:31] <badnaam> ubutom as per the docs I issue the command mount | egrep 'udf|iso9660' with a disc in my drive, it outputs nothing
[21:31] <Aquina> mmfb, I' sorry to hear that. Maybe Valve will release it's GNU7Linux client soon. I think Wolfenstein will be playable then. :-)
[21:31] <Seta2501> they did make a linux version of RTCW
[21:31] <test1_> trying to migrate from w7 here =)
[21:31] <coz_> test1_,  oh cool
[21:31] <KenBW2> misse-: (1) to be able to share my home folder across installs without sharing profiles, and (2) to not have to wade through a huge list in apps that show .folders
[21:31] <mmfb> Aquina: I appreciate all you help, but my problem has been solved. gee told me of a Wolfenstein linux client and I've found it.
[21:31] <Haagimus> KenBW2: download ubuntu tweak and there is a section under "Petrsonalize" that will allow you to do just tha
[21:31] <coz_> test1_,  how is it going so far?
[21:32] <axisys> !upstart
[21:32] <ubutom> badnaam, try hdparm -d /yourdrive
[21:32] <Aquina> h00k, he was not since I wanted to figure out wheter that guy was only able to speak german and whether he needed help. That was the whole intention.
[21:32] <test1_> coz_: that's what i just asked =) ubuntu/mint vs pclinuxos and kde vs gnome
[21:32] <sechs> gee: i dont understand a thing!! i will get crazy. I will search at asus web.
[21:32] <mmfb> I have another question. How do you "uninstall" programs on Linux? Ones that aren't within the "Add/Remove Applications"?
[21:32] <badnaam> ubutom I don't know what the yourdrive is
[21:32] <Haagimus> ubuntu tweak will allow you to change the default folder locations
[21:32] <ubutom> badnaam, with a sudo and where /yourdrive is the device name
[21:32] <brainproxy> I've manually installed the synergy plus deb; I force installed qsynergy, not wanting to install the stock synergyc/s binaries, but now I'm getting a persistent warning about a broken package related to qsnyergy
[21:32] <pelmen> guys, how do i install otf font in ubuntu ?
[21:32] <gee> aquina i speek english. dont you worry
[21:32] <brainproxy> how can I suprress that warning?
[21:33] <pelmen> it's weired that open system does not support open fonts better.
[21:33] <brainproxy> clarification:  I mean the warning that's showing up in the overhead menubar on my desktop
[21:33] <coz_> test1_,  well  in all honesty  I if going ubuntu I would stick with regular ubuntu   and if you want that windows 7 look   go with kde which had that look first  or if you want sensible default theme go with gnome...i prefer gnome myself  but i would not go linux mint only becasue it is ...  i believe... always on version behind
[21:33] <badnaam> ubutom how do I find out the device name?
[21:33] <ubutom> badnaam, look in drive utitily under system
[21:33] <KenBW2> Haagimus: thanks, ill give it a try
[21:33] <h00k> Aquina: It's over, the conversation was not appropriate for this channel. Please move along :)
[21:34] <uo3273-fvarklb> Hello.  I just need someone's help deciphering the meaning of a message kicked back to me when I attempt to run "apt-file search [file path]" and then debsums -a [key word]|grep [package name].  I am just verifying that encrypted ZIP files kicked in the scan results for KlamAV - are the original installation files (i.e. not altered, and therefore not a virus).
[21:34] <coz_> test1_,  rather always "one" version behind
[21:34] <Aquina> mmfb, is that version free? Can you post a link then for mee too? :-)
[21:34] <ubutom> badnaam, there your partitins are listed and also your drive, with iot's device name, mine is /dev/sr0
[21:34] <mmfb> Aquina: http://www.filefront.com/thankyou.php?f=852003&k=8cfa68611a15eb88047633f183bab26ea72c2ac876be407616174e226e9b1592
[21:34] <badnaam> ubutom sorry bit of a noob here, where can I get this partition list?
[21:35] <mmfb> It's free! :)
[21:35] <test1_> coz_: i've only tested live cd-s with gnome so far and i did quite like it, was just wondering if there were any major pro's and con's. additionally, i'm a bit tired of the "windows look" =) how about pclos vs ubuntu then? i've tested both and liked pclos the best (by testing i mean check the live-cd for 20 minutes)
[21:35] <ubutom> badnaam, sudo hdparm -d /dev/sr0 would enable or disable dma mode on my drive for example
[21:35] <_marco_> hello!
[21:35] <Haagimus> KenBW2: NP hope its what you were triying to do
[21:35] <Orochi> heeeey...guuuuuys
[21:35] <test1_> coz_: of course, #ubuntu's ten zillion irc users beats pclos' 19, but aside from that =)
[21:35] <gee> test1_ ubuntu is, in my opinion the most advanced and most widely supported.
[21:35] <Aquina> h00k, I don't understand what you mean, but it was nice to have a conversation with you. :-)
[21:36] <Orochium> can anyone help me with installation problem?
[21:36] <ubutom> badnaam, I#m not using englisch in my menus, can only guess whats it called in your system it's the second dropdown menu in system on top of screen
[21:36] <uo3273-fvarklb> So when I run "apt-file search /usr/xulrunner-1.9.1.9/libxul.so, and then debsums on the resulting package name - I get this message "debsums: package xulrunner is not installed".  Is this anything to be concerned about?
[21:36] <_marco_> I love Ubuntu
[21:36] <_marco_> I have Ubuntu
[21:36] <Haagimus> i second that _marco_
[21:36] <Aquina> :-)
[21:36] <gee> same lol
[21:36] <BluesKaj> Orochium, ask away
[21:36] <_marco_> I use Ubuntu
[21:36] <KenBW2> Haagimus: are you talking about the Change Default Folders section?
[21:36] <Orochium> I basically just (literally) downloaded Ubuntu 10.04, when I try to get it to boot from CD, the screen turns blue, and there's some icon at the bottom of the page, thats like some icon = a little guy in a circle, but it just hangs there, blue screen, and that icon
[21:37] <axisys> how do I start a process as a user with upstart ? do I just do this? su user exec /bin/foo ?
[21:37] <Orochium> never does anything after
[21:37] <Haagimus> KenBW2: yes
[21:37] <h00k> _marco_: do you have any specific questions for us?
[21:37] <Orochium> this is on a Dell e310
[21:37] <_marco_> nope
[21:37] <ilkkaile69> hello
[21:37] <gee> arent there normally problems with dell hardware?
[21:37] <felix__> hey guys, i got a beginner question.... how do i get root rights for my account?
[21:37] <KenBW2> Haagimus: that seems to only edit what would normally be in user-dirs.dirs
[21:37] <h00k> !sudo | felix__
[21:37] <uo3273-fvarklb> Anyone got the "411" on this - eyee, eyee !?
[21:37] <Orochium> no, been running linux Mint 8 and 9 flawlessly, I only ever seem to have problems with ubuntu distros
[21:37] <gee> felix_ in terminal use the su command
[21:37] <KenBW2> Haagimus: i'm after moving all the .profile folders away from my normal files
[21:38] <ilkkaile69> where i can get driwers for the web cam
[21:38] <gee> or use the sudo command
[21:38] <BluesKaj> Orochium, from where did you download ?
[21:38] <Orochium> I remember trying to get 8.04, 8.10 etc working...
[21:38] <Orochium> Blue: from ubuntu.com?
[21:38] <Haagimus> KenBW2: hmmm
[21:38] <GreenGuy> orochium: Mint, huh?  How is it for driver support?
[21:38] <h00k> !mint
[21:38] <test1_> So, anyone else have any views on PcLinuxOS vs ubuntu?
[21:38] <guntbert> gee: su won't get him anywhere
[21:38] <sechs> gee: you know how I install the .awd file, for the bios?
[21:38] <Haagimus> KenBW2: can you specifically say what you are trying to do then i guess i mis-understood i apologize
[21:38] <Orochium> anyhow I'm installing Ubuntu currently, not mint
[21:38] <gee> sechs afraid not, not a file type ive seen before
[21:38] <Aquina> Orochium, I suggest you to download form the official canonical website.
[21:38] <digital-diesel> hi i really need help...  using lucid on my laptop i was experiencing bugs so i did a fresh install of lucid and everything was working great and all of a sudden the screen got really weird and it went black with these weird colors and lines.  all i could do was turn it off from the power button, and it keeps happenning.  i have a karmic startup disk and i can get it to run frokm the disk...
[21:38] <digital-diesel> ...for a little while but then it happens again and i have no idea what the probem is, or if i should do a fresh install with my 9.10 disk or what, can someone please help me?
[21:38] <Orochium> Aquina: link?
[21:38] <mmfb> gee: After downloading the Wolfenstein linux client it comes out as a .run file. How do I execute the file? It asks me to choose a program to run it under and I'm not sure what to do.
[21:39] <uo3273-fvarklb> uh, did anyone see my post?
[21:39] <Aquina> http://www.ubuntu.com/desktop/get-ubuntu/download
[21:39] <Orochium> because for some reason I thought ubuntu.com was the sight for ubuntu lol
[21:39] <Seta2501> i think im gonna stop useing ubuntu. its just not working for me
[21:39] <gee> mmfb in terminal cd to the location of the file and type sudo ./nameofrunfile.run
[21:39] <guntbert> uo3273-fvarklb: we hear you
[21:39] <Orochium> Aquina: thanks thats EXACTLY what I downloaded
[21:39] <badnaam> ubutom I get this error when I type that command HDIO_GET_DMA failed: Inappropriate ioctl for device
[21:39] <sechs> gee: and a rom file?
[21:39] <gee> mmfb or sudo sh ./runfile.run i think it is
[21:39] <uo3273-fvarklb> guntbert: K - can you help?
[21:40] <alket> Is it possible to run lucid with hardy kernel ?
[21:40] <gee> sechs lol sorry nope
[21:40] <KenBW2> Haagimus: i want my normal files (the unhidden ones) in /home/kenneth/ but all the .mozilla, .purple, .config etc folders somewhere else - maybe even to ~/.profiles/.mozilla
[21:40] <KenBW2> make sense?
[21:40] <guntbert> uo3273-fvarklb: sorry no
[21:40] <badnaam> I looked in disk utility and though I can't say for sure it seems the dvd drive is /dev/sr0
[21:40] <_marco_> See ya, guys, I go out
[21:40] <sechs> gee: i hate asus.
[21:40] <Aquina> Orochium, dod you verify the media with md5sum or by checking it form the LiveCD?
[21:40] <ubutom> badnaam, yeah, tried it with mine, got the same error
[21:40] <Orochium> yes
[21:40] <digital-diesel> do you mean me orochium?
[21:40] <gee> sechs yeah not the best make
[21:40] <Orochium> checksums were fine
[21:40] <uo3273-fvarklb> K - guntbert doesn't know.  Anyone else wanna take a stab at my issue?
[21:40] <Haagimus> KenBW2: ahhh ok i see what your asking. I'm afraid I do not know the answer to that question, sorry
[21:41] <Orochium> man I only seem to have problems with ubuntu, maybe I just stick with Mint Isadora then, this is like the fourth different Ubuntu distro I've tried thats never worked
[21:41] <KenBW2> Haagimus: ah well, thanks anyway
[21:41] <ubutom> badnaam, I think it should have been unmounted first :(
[21:41] <Orochium> 8.04, 8.10, now 10.04
[21:41] <Haagimus> KenBW2: could be possibly a setting in the gnome-config
[21:41] <Aquina> Orochium, awry colored screen can result from hardware problems like display adapters, touch screens and other hardware. I recommend you to perfomr a text driven isntall without booting into Live-CD mode.
[21:41] <sechs> anyone here know how i install motherboard drivers, with .awd and .rom extensions?
[21:41] <Orochium> either it was always missing some basic generic driver or something else, blah
[21:41] <badnaam> ubutom oh, how do I do that?
[21:41] <Orochium> I'm not even making it into live cd mode
[21:41] <Orochium> aquina, so I'm not even sure what you're talking about
[21:41] <Haagimus> KenBW2: i would suspect that you would have to change system settings to do it since most everything you install defaults to your home folder for the setting files
[21:41] <guntbert> Orochium: this is no place for ranting - we can try to help you though
[21:41] <Orochium> therefore I will assume you are spouting random TS lines <3
[21:41] <alecs> hi! what does means ?  E: Read error - read (5: Input/output error)
[21:41] <ubutom> badnaam, I just opened it
[21:42] <alecs> E: The package lists or status file could not be parsed or opened.
[21:42] <gee> orochium have you tried the alternate cd?
[21:42] <alecs> E: _cache->open() failed, please report.
[21:42] <Orochium> nah, pass, I'm already turned off.
[21:42] <Orochium> later.
[21:42] <uo3273-fvarklb> Has anyone used "apt-file search" and "debsums" in terminal to verify footprints of system files match those of the original installation files?
[21:42] <Aquina> Orochium, try the alternate CD and install with a less graphical isntaller. Alternatively file a bug report on launchpad.net or check whether your hardware is supported on ubuntuhcl.org.
[21:42] <badnaam> ubutom opened it? what?
[21:43] <ubutom> badnaam, I opened the drive
[21:43] <ubutom> badnaam, meaning ejected the lid and closed it again
[21:43] <badnaam> ubutom ok, I see, and then run that command?
[21:43] <BluesKaj> mmfb, if the file is in your home/user then in the terminal just do  ./nameofile.run
[21:43] <ubutom> badnaam, have you found the name of your drive?
[21:43] <NfNitLoop> I'm trying to get compiz working with KDE in 10.04 and I'm seeing this error:  http://pastebin.com/iZrn1hfu
[21:43] <digital-diesel> Aquina: i am having that problem with the colors too on my sdcreen...
[21:43] <ubutom> badnaam, wait a sec
[21:43] <NfNitLoop> any help/suggestions would be greatly appreciated. :)
[21:44] <ubutom> badnaam, what's your device called?
[21:44] <badnaam> I think /dev/sr0
[21:44] <mmfb> gee: when entering  sudo runfile.run I am asked for my sudo password. After entering my password I get command not found. Using  sudo sh ./runfile.run  I get  can't open ./runfile.run
[21:44] <sechs> hey, anyone shall know about it? how to install drivers for a asus motherboard, with .awd and .rom extensions???
[21:44] <guntbert> alket: why would you want to do that?
[21:44] <badnaam> ubutom don't quote me though
[21:44] <digital-diesel> i guess i will just follow everything said for orochium
[21:44] <digital-diesel> lol i guess its my lucky day in a way
[21:44] <gee> mmfb tried sudo ./runfile.run
[21:44] <digital-diesel> someone else with the samne issue
[21:44] <ubutom> badnaam, try sudo hdparm -i, it will give you a list
[21:44] <badnaam> ubutom also I id the following command accoriding to the docs and saw a bunch of output dmesg | grep ata | more
[21:44] <alket> guntbert, because of my graphic card Readon x700
[21:44] <Aquina> guntbert and h00k, why are you not opped or half-opped?
[21:44] <Appl6> mmfb: What is the output of "ls -l runfile.run"?
[21:44] <mmfb> Yeah. I get command not found
[21:45] <ubutom> badnaam, in that list you will see the active mode the drive is using, in my case the star is at udma5
[21:45] <mmfb> appl6: space after -l?
[21:45] <Appl6> mmfb: Yes.
[21:45] <ubutom> badnaam, which is good, something like pio would be very, very slow ;)
[21:45] <h00k> Aquina: Freenode discourages people from remaining opped in a channel, there is no need for it :)
[21:46] <guntbert> alket: old radeon cards seem to well supported by the open source driver
[21:46] <badnaam> ubutom you mean in the output of dmesg | grep ata | more
[21:46] <badnaam> ?
[21:46] <mmfb> appl6: ls: cannot access et-linux-2.55.x.86.run: No such file or directory
[21:46] <alket> guntbert, no they don't I cant play Glest or Yo Frankie
[21:46] <ubutom> badnaam, no, try a sudo hdparm -i /dev/sr0
[21:46] <arooni-mobile___> hey folks;  ubuntu requires me to give a password when i login.  to unlock keyring.  what can i do to make this not happen?  as soon as i enter it correctly it starts connecting to wireless network
[21:46] <Aquina> h00k, really!? ;-) Guess it' different fom my QuakeNet helper time then...
[21:46] <mmfb> The file is save to my "Download" folder.
[21:46] <Appl6> mmfb: So you're not actually trying to run "runfile.run", you're trying to run "et-linux-2.55.x.86.run"?
[21:47] <ubutom> it will show the current mode the drive is working at and then we will know if it's wrong or not badnaam
[21:47] <mmfb> appl6: I should type in runfile and not actually the name of the file?
[21:47] <badnaam> ubutom, the star is on udma5
[21:47] <gee> mmfb no
[21:47] <ubutom> badnaam, then it's good
[21:47] <Appl6> mmfb: No, you should type the actual name of the file.  Of course, it also helps if you tell _us_ the name of the file, so we know what the error messages mean.
[21:47] <ubutom> badnaam, what speed do your discs support?
[21:47] <gee> mmfb that was just me calling it that for example purposes
[21:47] <GreenGuy> how do i upgrade from 9.04 jaunty to 10.04?
[21:47] <BluesKaj> mmfb, where is the file located?
[21:48] <ubutom> badnaam, most only support 8x speed
[21:48] <GreenGuy> do I have to go to 9.19 KK first?
[21:48] <guntbert> alket: hmm ... I don't expect lucid to work ok with an ancient kernel to be honest, but I do not *know*
[21:48] <h00k> GreenGuy: you'll have to upgrade through 9.10 first
[21:48] <h00k> !upgrade | GreenGuy
[21:48] <gee> mmfb are you in the Downloads folder in terminal?
[21:48] <sechs> wow, please, im asking for some help!! how do I install drivers for an asus motherboard, with the .ROM and .AWD extensions???
[21:48] <bazhang> GreenGuy, you need to take the intermediate step first
[21:48] <arleslie> I have a netgear USB wireless adapter and it's unable to connect to any encrypted wireless access points any ideas why?
[21:48] <badnaam> ubutom 1-16x
[21:48] <mmfb> gee: I'm not sure how to get there.
[21:48] <GreenGuy> bazhang: thx
[21:48] <alket> guntbert, is Hardy Heron still supported with updates ?
[21:48] <gee> mmfb cd  then cd /Downloads
[21:48] <mmfb> gee: Like I said I'm super fresh into Linux. I know close to nothing right now. :(
[21:48] <BluesKaj> alket, no
[21:48] <Appl6> mmfb: "sudo updatedb ; locate et-linux-2.55.x.86.run"
[21:49] <ubutom> badnaam, well, then you should be able to burn at 16x, what did the burning program say, did it output the speed at which it was burning?
[21:49] <gee> mmfb dont worry i was there a few years ago haha
[21:49] <badnaam> ubutom yes 2x
[21:49] <armor-64> hi!is there any program that can text me from a wav file?please respond to me quick!at least say no if you don't know
[21:49] <badnaam> ubutom it said 8 hours + for burning less thn 1gb of data
[21:50] <sechs> gee: maybe no one reads me? Im not sure if im using irc well
[21:50] <alket> BluesKaj, aren't LTS for three years of support ?
[21:50] <guntbert> alket: yes, till April 2011
[21:50] <ubutom> badnaam, yeah, that's too slow, tried another program?
[21:50] <mmfb> /home/mmfb/Downloads/et-linux-2.55.x86.run is the result
[21:50] <h00k> !patience | sechs
[21:50] <gee> sechs your using it fine mate
[21:50] <badnaam> ubutom brasero is what I have, anything else you recommend?
[21:50] <cedda> how do you put a program in startup
[21:50] <mmfb> gee: when I type in cd then cd /downloads, it says bash: cd: /downloads: No such file or directory
[21:50] <Appl6> cedda: System -> Preferences -> Startup Applications
[21:50] <gee> mmfb linux is case sensative
[21:50] <ubutom> badnaam, I think there'S also x-cdroast and others
[21:51] <gee> mmfb make sure its Downloads
[21:51] <mmfb> gee: haha, well damn.
[21:51] <Appl6> mmfb: And it should be "~/Downloads", not "/Downloads".
[21:51] <badnaam> ubutom ok, let me try that then
[21:51] <guntbert> cedda: system/preferences/startup applications
[21:51] <armor-64> cedda , right click on main manu bar and then edit menu
[21:51] <ubutom> badnaam, best place to look is in software center
[21:51] <gee> mmfb or just cd Downloads
[21:51] <badnaam> ubutom ok, thanks for your help!
[21:51] <arleslie> I have a netgear USB wireless adapter and it's unable to connect to any encrypted wireless access points any ideas why?
[21:51] <mmfb> appl6: That worked.
[21:51] <h00k> mmfb: 'cd Downloads/' If you put a first shash (/Downloads) it will look to the root of the drive. If you don't, it will assume you want to go there from your current working directory (probably /home/username/Downloads)
[21:52] <ubutom> badnaam, your welcome
[21:52] <lapion> does anyone know how to mount a partition with the linux-kernel ntfs driver ( non-fuse version) ?
[21:52] <sechs> hook, ubottu, gee, thank you, i've searched, but i havent find. I will try again. I was having my problem for long time, and every time i turn on my pc i only search for solutions. Im sure i dont know how to use ubuntu and linux, but i want to learn
[21:52] <guntbert> armor-64: one of us misread the question of cedda
[21:52] <mmfb> Now that I'm in Downloads, should I try the sudo command now?
[21:52] <BluesKaj> oops sorry alket , I'm wrong...it appears to be supported
[21:52] <mmfb> cd
[21:52] <cedda> guntbert, you won
[21:52] <mmfb> Oops
[21:52] <cedda> :P
[21:52] <guntbert> cedda: :)
[21:52] <sechs> also i asked at spanish ubuntu forums, and no one said anything, so, thats wy im here :D
[21:53] <h00k> sechs: if you're new to ubuntu, you can check out #ubuntu-beginners channel (/join #ubuntu-beginners), also the !manual
[21:53] <armor-64> gunbert , yeah i know!it's me sorry
[21:53] <h00k> !manual | sechs
[21:53] <Vooloo> anyone know if there is a plugin for gedit that will create an automatic closing bracket } when I type { ?
[21:53] <gee> mmfb yeah the sudo ./runfile.run or sh ./runfile.run command should work
[21:53] <ultimaexodus> Anyone here good at webcams?
[21:53] <myrk> yohoho and a bottle or rum
[21:53] <Haagimus> i love run
[21:53] <Haagimus> rum
[21:53] <BluesKaj> alket i always thoughtbwhen a new LTS was released the the previous one was taken off LTS
[21:53] <gee> sechs tell me if you find the answer
[21:53] <pipegeek> clearly
[21:54] <mmfb> sh command seems to have worked
[21:54] <gottto> sechs: afaik those are drivers for windows so you don't install them in linux
[21:54] <sechs> thank you everyone. I will search for it
[21:54] <tic^> !webcams | ultimaexodus
[21:54] <lapion> for some reason every time I try to mount a ntfs filesystem fuse seems to take ove
[21:54] <snow_veil> where is a cd/dvd drive location in the /dev/ folder?
[21:54] <alket> BluesKaj, thank you I know that you didn't say that with purpose but anyway im not going to switch 2 years back just for 2 stupid games
[21:54] <pat5star> lapion: are you having problems mounting an ntfs drive?
[21:54] <roolebo> For some reason vim doesn't react on "H" key, but "L" and "M" work as supposed. Is it ubuntu-related problem or bug in vim or maybe something else?
[21:54] <snow_veil> IE, hdd is /dev/sda, /dev/sdb, etc....where would I mount my cdrom or dvdrom to?
[21:54] <myrk> can wine use webcams?
[21:55] <arleslie> I'm unable to connect to a secured wireless network using a Netgear USB adapter, any ideas how to fix this?
[21:55] <Haagimus> snow_veil: /dev/sr# usually
[21:55] <sechs> gottto: at asus webpage there was a bios driver for linux, but it had the extensions that i told, so i dont know how to install
[21:55] <gee> mmfb i used sudo sh ./et-linux-2.55.x86.run and it started the install
[21:55] <pat5star> lapion: mount -t ntfs-3g    you try that?
[21:55] <gee> mmfb while i was in the Downloads folder ofcource
[21:55] <ultimaexodus> Hmm...it looks like my webcam is not supported... :(
[21:55] <h00k> sechs: is there a reason you're trying to specifically install the 'drivers' for Linux, is something not working?
[21:55] <gottto> sechs: I think that would be a windows thing - there would have been instuctions or a readme file
[21:56] <lapion> pat5star, the partion mounts ok sing the fuse driver but the fuse driver is slowww and processor intensive.. while the kernel-native driver is a lot faster
[21:56] <ljsoftnet> how do i play DVD from mplayer with External Optical Drive?
[21:56] <mmfb> gee: After placing in the command, I get a prompt to enter my password. When I do I get this...
[21:56] <lapion> *partition
[21:56] <BluesKaj> alket , well it's very stable and still work well , even after 2 yrs
[21:56] <mmfb> gee: su: Authentication failure
[21:56] <mmfb> /home/mmfb/.setup4755: error while loading shared libraries: libgtk-1.2.so.0: cannot open shared object file: No such file or directory
[21:56] <mmfb> The setup program seems to have failed on x86/glibc-2.1
[21:56] <sechs> hook i had a problem with freezing. sometimes my pc gets freezed and i have to reestart manualy
[21:56] <lapion> *using
[21:56] <Appl6> roolebo: Press MHMHMH.  The cursor moves for me.  What version of vim, and in the terminal or gvim?
[21:56] <pat5star> lapion: oh I see what you're talking about. that I don't know...sorry, and gl!
[21:56] <gee> mmfb enter your password that you use to log in
[21:57] <mmfb> gee: that's the one I entered.
[21:57] <sechs> gottto: no readme file and no instructions that i can find. maybe i dont recognize them, but im sure i searched for days
[21:57] <lapion> pat5star, thanks for trying.
[21:57] <gee> mmfb ok thats odd
[21:57] <h00k> sechs: check to see if your memory is okay, run a memtest from the Ubuntu CD
[21:57] <gottto> sechs: none on the site you got the bios from?
[21:57] <sebsebseb> Hi
[21:57] <mmfb> Should I just try to hit enter to bypass?
[21:57] <ultimaexodus> I just dont get this...when I installed Ubuntu...it installed all the drivers automatically...I didnt have to do a thing... Now...just trying to make a simple webcam and usb gamepad to work seems like a nightmare... :(
[21:57] <roolebo> Appl6: vim 7.2.330-1ubuntu3.
[21:58] <lapion> I loaded the ntfs-kernel module however: if I do : sudo mount -t ntfs /dev/sdi1 /mnt  the system uses the fuse driver anyone know how to turn this functionality off ?
[21:58] <arleslie> I'm unable to connect to a secured wireless network using a Netgear USB adapter, any ideas how to fix this?
[21:58] <sechs> hook memtest ok. I put the cd and search for it? or i have to restart?
[21:58] <myrk> thats a bummer
[21:58] <gottto> sechs: and I think the issue is the mem like h00k said
[21:58] <sebsebseb> mmfb: What you doing, just joined
[21:58] <guntbert> mmfb: you don't get any feedback when typing that password -- type it and press <enter>
[21:58] <h00k> sechs: you'll have to boot from the CD
[21:58] <sebsebseb> ultimaexodus: uh right yeah,  a lot of hardware just works, but not everything, since lack of manufacture support, and such
[21:58] <nikitis> Has anyone tried using the new MadCatz R.A.T. 9 Gaming mouse on Ubuntu?  I'm looking to buy but do not know it's compatibility.
[21:59] <sechs> gottto, ok I will try. I have to insert some command?
[21:59] <ljsoftnet> how do i play DVD from mplayer with External Optical Drive?
[21:59] <ultimaexodus> sebsebseb: Im so close to giving up and going back to windows :(
[21:59] <c3l> why is hexadecimal used, why not octal? octal is easier for humans to work with, and one octal is one byte - easy to refer to. 16 is 2 bytes, and much harder to work with for humans (as there are many 'numbers' to hold in mind) and the whole purpose of hexadecimal is to make binare easier to work with for humans, ocal is better?!
[21:59] <gottto> sechs: it is an option in the boot menu - memtest
[21:59] <whodat> I got a pair of usb to cat5 extenders, but my webcam isnt seen on them, do I need a module built or called?
[21:59] <mmfb> After entering my password I still get that error.
[21:59] <sebsebseb> ultimaexodus: got Windows on dual boot?
[21:59] <mmfb> It says I can just hit enter to continue as is... Should I try that?
[21:59] <TheMozart> is the new ubuntu out yet?
[21:59] <h00k> !ot | c3l
[21:59] <ultimaexodus> sebsebseb: yes
[22:00] <sebsebseb> !10.04 | TheMozart
[22:00] <alecs> can anyone help me with this ? apt-get upgrade
[22:00] <alecs> Reading package lists... Error!
[22:00] <alecs> E: Read error - read (5: Input/output error)
[22:00] <h00k> TheMozart: New being Lucid, yes.
[22:00] <alecs> E: The package lists or status file could not be parsed or opened.
[22:00] <FloodBot4> alecs: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[22:00] <TheMozart> ok
[22:00] <CaptainTrek> akecs: you tried using sudo?
[22:00] <CaptainTrek> alecs: you tried using sudo?
[22:00] <sebsebseb> ultimaexodus: ok so you can use Windows for that,  or you could try a virtual machine of Windows even
[22:00] <alecs> CaptainTrek: yes
[22:00] <alecs> i am running as root
[22:00] <ultimaexodus> sebsebseb: yes...but...not the optimal solution :(
[22:00] <h00k> alecs: you don't want to be running as root
[22:01] <mmfb> gee: Password and hitting enter the try and bypass do not work. I still get the failed message
[22:01] <alecs> h00k: i know ... now is a special case
[22:01] <niku> alecs: try 'apt get update' then 'apt get upgrade'
[22:01] <gee> mmfb ok thats really strange mate. i'm not sure whats going on
[22:01] <sebsebseb> ultimaexodus: or you could try some other distro even, but they may also get issues with web cams and gamepads
[22:01] <Ztyx> Anyone here who's syncing their iPod/iPhone with Rhythmbox? Have you tried syncing with iTunes afterwards? What happens?
[22:01] <mmfb> Let me try and redownload the file.
[22:01] <ultimaexodus> sebsebseb: what about Wine?
[22:01] <digital-diesel> hi guys...  i was wondering if anyone knew the cause of this problem:  i did a fresh install of lucid and everything was working great and all of a sudden the screen got really weird and it went black with these weird colors and lines. all i could do was turn it off from the power button. ..
[22:01] <rallias> I'm having difficulty identifying an issue i am having. Can someone point me to the sources.list file?
[22:02] <roolebo> Appl6: it seems to be my config problem. the things gone right without .vimrc.  thanks
[22:02] <sebsebseb> ultimaexodus: Wine is not for drivers
[22:02] <gee> mmfb i have another problem going on (i downloaded the game too). It wont run on my pc because it's on the wrong architecture :S designed for 32 bit and i'm using 64
[22:02] <banker247> is there some kinda thing i can do to make evolution mail client launch at startup then my alltray application minimize it to the taskbar?
[22:02] <ultimaexodus> sebsebseb: oh...okej
[22:02] <sebsebseb> !wine | ultimaexodus
[22:02] <alecs> niku: i get the same thing
[22:02] <ljsoftnet> how do i play DVD from mplayer with External Optical Drive?
[22:02] <mmfb> gee: Looks like it wasn't meant to be for us, huh?
[22:03] <gee> mmfb haha yeah
[22:03] <AlbSpirit> i need to install the last ulteo but i have some probleme with libxfcegui4-1.0 can you help me please?
[22:03] <sebsebseb> ultimaexodus: sadly for webcams and gamepads, its not like wireless, where most of the time a Windows driver can actsaully be used with a progarm
[22:03] <rallias> wheres the sources.list file?
[22:03] <Appl6> mmfb: Can you link to the site where you downloaded it, please?
[22:03] <Haagimus> Has anyone successfully gotten an Iphone 3GS (16GB) to link up with amarok 2.3.0? I can get it to give me the initialize window but the specific model is not in there and it will not initialize with either of the other two iPhone options. (Ubuntu 9.10)
[22:03] <mmfb> appl6: Yeah, one sec.
[22:03] <sebsebseb> ultimaexodus: most hardware support by the way is built in to the Linux kernel,  but not all manufactures support Linux propery or at all,  so a lot of hardware support has been reverse enginered, which is a rather complex programming task
[22:03] <niku> alecs: is there anyother program that could be locking up the package databases? eg: synaptic
[22:03] <sebsebseb> ultimaexodus: may be able to configure your hardware, but it won't be that easy
[22:04] <ultimaexodus> sebsebseb: okej
[22:04] <AlbSpirit> can some one help me please
[22:04] <rallias> Haagimus: That was mentioned recently in a security alert. If you hook it up to ubuntu, appearantly you can access all the files without the pin number.
[22:04] <niku> alecs: alternately, have you made any recent changes to the sources.list file?
[22:04] <sebsebseb> ultimaexodus: how much RAM you got?
[22:04] <alecs> niku: no
[22:04] <guntbert> alecs: what did you do before those errors started?
[22:04] <ubutom> rallias, /etc/apt/sources-list
[22:04] <sebsebseb> ultimaexodus: whats the gamepad for whatk ind of games?
[22:04] <ljsoftnet> how do i play DVD from mplayer with External Optical Drive?
[22:04] <sebsebseb> ultimaexodus: also which program did you try the web cam with?
[22:04] <ultimaexodus> sebsebseb: I understand that...and the thing is....my webcam is supported in the...that french guy driver...
[22:04] <sebsebseb> ultimaexodus: cheese is for configuring web cams by the way
[22:04] <ultimaexodus> sebsebseb: I tried it there...and..
[22:05] <ubutom> rallias, /etc/apt/sources.list
[22:05] <alecs> this is my output http://pastebin.com/i0kp1bCY
[22:05] <ultimaexodus> sebsebseb: one sek
[22:05] <Haagimus> rallias: i can hook it up and view everything however i want to be able to get it to show up in amarok so i can fill it up with music and put a couple movies on it
[22:05] <arleslie> I'm unable to connect to WEP wireless networks with a Netgear usb adapter, any ideas how to fix this?
[22:05] <Ztyx> ljsoftnet: I think it's something like "mplayer dvd://"
[22:05] <mmfb> appl6: http://www.filefront.com/thankyou.php?f=852003&k=8cfa68611a15eb88047633f183bab26ea72c2ac876be407616174e226e9b1592
[22:05] <ultimaexodus> sebsebseb: it just starts...and nothing happens
[22:05] <digital-diesel> banker247:  system>preferences>startup programs or somthing ilke that, and add evoution...  i think
[22:06] <Ztyx> ljsoftnet: Check out the mplayer man page and you'll see exactly how to do it, "man mplayer".
[22:06] <sebsebseb> ultimaexodus: you need to provide specific details, or people can't help you properly
[22:06] <nikitis> So nobody has an MadCatz R.A.T. 9 gaming mouse and can tell me if it's compatible with Ubuntu?
[22:06] <sebsebseb> ultimaexodus: what just starts, and with what nothing happens?
[22:06] <ubutom> nikitis, never had a gaming mouse in my whole life :)
[22:06] <ljsoftnet> Ztyx: do u know, the drive location of an external optical drive, i've tried dvd:// with no luck
[22:07] <gee> mmfb any closer?
[22:07] <nikitis> ubutom: Sad...  Go get one!
[22:07] <mmfb> gee: I wish
[22:07] <Ztyx> ljsoftnet: Nope, sorry. :-/ I got to go, but good luck!
[22:07] <ubutom> nikitis, nah, office mouse served me good :)
[22:07] <rcscomp> I have a wireless netgear card that isn't working
[22:07] <rcscomp> iwconfig and ifconfig both show it there, but networking icon says "network disabled"
[22:08] <chisel_> i get an Invalid PBLK length message when ubuntu boots up. this is a fresh install, and it never did it before....pls advise
[22:08] <mmfb> gee: keeps telling me libgtk-1.2.so.0: cannot open shared object file: No such file or directory.
[22:08] <ljsoftnet> how do i play DVD from mplayer with External Optical Drive?
[22:08] <gee> mmfb thats where i am too
[22:08] <ultimaexodus> sebsebseb: in this list: "http://mxhaard.free.fr/spca5xx.html" "Mustek	67	0x055f	0xc520	Gsmart mini3	 	spca504a	 	Yes	Jpeg	spca5xx/LE	***"
[22:08] <chisel_> that is to say, it never gave me that message in other ubuntu installs
[22:08] <ultimaexodus> sebsebseb: its supported...so...
[22:08] <gee> mmfb trying to figure it out just now, what ubuntu you running?
[22:08] <mmfb> Xubuntu 9.10
[22:08] <alecs> guntbert: i reallly don't remember .... but i know that some of my gnome applets have crashed... then i have rebooted, then i had some problems on  GDM ... after that .... i get this after several reboots
[22:08] <sebsebseb> ultimaexodus: is that page in English?
[22:09] <ultimaexodus> sebsebseb: yes
[22:09] <sebsebseb> rcscomp: ok wireless
[22:09] <offy> On my laptop I have ubuntu 10.04. When it is loading something the touchpad doesn't work
[22:09] <sebsebseb> !wireless | rcscomp
[22:09] <ljsoftnet> how do i play DVD from mplayer with usb External Optical Drive?
[22:09] <sebsebseb> rcscomp: so yeah try and get it working natively :)  if no luck, you can try Ndiswrapper and probably use a Windows driver for it
[22:09] <rcscomp> sebsebseb: thing is, its worked before
[22:09] <nmvictor> i deleted some .files under ~/.* and so my system cant recognize any available wireless networks like it used to, please help...
[22:10] <sebsebseb> ljsoftnet: commercial DVD?
[22:10] <mmfb> gee: Xubuntu 9.10
[22:10] <rcscomp> but this time, the lights don't go back and forth, the one light just stays on
[22:10] <sebsebseb> rcscomp: when did it stop working then?
[22:10] <ljsoftnet> sebsebseb: yes and original
[22:10] <guntbert> alecs: I don't remember where apt stores its staus files - I try to find them right now
[22:10] <sebsebseb> ljsoftnet: ok you will need to install DVD support, since legal reasons Ubuntu does not have that pre installed
[22:10] <rcscomp> sebsebseb: just now, turned on the laptop and plugged in the card and no go.  iwconfig still shows the card, although its not in ifconfig any more
[22:10] <ubutom> nikitis, doesn't look bad. Well, you could buy it, try it and if it doesn't work return it
[22:11] <gee> mmfb ok, i'll let you know if i get it running
[22:11] <sebsebseb> ljsoftnet: libdvdcss2/3  found in the medibuntu repo
[22:11] <sebsebseb> !medibuntu | ljsoftnet
[22:11] <gothenburg> :p
[22:11] <malac0da> Can anyone help me with getting sound to work on my laptop. It was working fine up until like yesterday
[22:11] <nikitis> ubutom: I'm sure it works on a basic level.  How does Ubuntu determine the DPI of a mouse?
[22:11] <alecs> guntbert: thanks
[22:11] <ljsoftnet> sebsebseb: i just need the drive location of the usb External Optical drive
[22:11] <sebsebseb> ljsoftnet: uhmm  /media  /mnt ???   /etc/fstbab ?
[22:11] <h00k> ljsoftnet: probably /media/something
[22:11] <offy> On my laptop I have ubuntu 10.04. When it is loading something the touchpad doesn't work
[22:12] <nikitis> ubutom: is there a /etc/ file for mice which tells ubuntu to use a certain DPI?
[22:12] <malac0da> I think it stopped working right after an update.
[22:12] <sebsebseb> ljsoftnet: thats /etc/fstab
[22:12] <ubutom> nikitis, I'm not sure about that, never had one that was able to switch, but maybe the mouse itself does that
[22:12] <MrAlexandro> could anyone not be an asshole and please redirect me to a channel where i could get help with proxy redirecting and vmware
[22:12] <Appl6> mmfb: Did you get my last message?
[22:12] <arleslie> I'm unable to connect to WEP wireless networks with a Netgear usb adapter, any ideas how to fix this?
[22:12] <mmfb> appl6: No I haven't.
[22:12] <ubutom> !language MrAlexandro
[22:12] <Appl6> mmfb: My Internet connection is dying (thanks Comcast), so I can't search.  All I can say is that you need to download a libgtk-1.2 package from an older version of Ubuntu (which you can find by searching for it at packages.ubuntu.com).  Maybe someone else can pick up from here.  Ubuntu uses libgtk-2.0 now, which is why you don't have the older version.
[22:12] <sebsebseb> ultimaexodus: uhmm I don't know
[22:13] <emhs[work]> An fstab entry for a USB external drive is processed at boot, right?
[22:13] <MrAlexandro> ubutom: sorry :/
[22:13] <nikitis> Appl6: Get a new ISP.  Speak with your money
[22:13] <whodat> I got a pair of usb to cat5 extenders, but my webcam isnt seen on them, do I need a module built or called? not in lsusb or dmesg
[22:13] <sebsebseb> ultimaexodus: ask again in a bit with all the detaills, maybe even try ##linux and be sure to tell them your on Ubuntu
[22:13] <ljsoftnet> sebsebseb: /etc/fstab is not a drive location
[22:13] <emhs[work]> By the way, folks, MeanEYE rocks.
[22:13] <sebsebseb> ljsoftnet: indeed, but
[22:13] <emhs[work]> Just thought y'all should know that.
[22:13] <sebsebseb> !fstab | ljsoftnet
[22:13] <mmfb> Appl6: Haha, that might be the issue. I'll look for it now and update you guys soon.
[22:13] <gee> mmfb appl6 that is the exact thing i am looking for just now haha
[22:14] <ultimaexodus> sebsebseb: thanks maan...Il do that :) and...Il hang in there
[22:14] <MeanEYE> haha :$ *shy*
[22:14] <ljsoftnet> sebsebseb: im not looking for drive partitions
[22:14] <alecs> guntbert: are we speaking of /var/cache/apt folder ?
[22:15] <ubutom> ljsoftnet, try the drive management wizard from menu
[22:15] <ubutom> ljsoftnet, also displays device names
[22:15] <ljsoftnet> ubutom: exactly where is that? where do i start?
[22:16] <Appl6> mmfb: gee: http://packages.ubuntu.com/jaunty/libgtk1.2
[22:16] <guntbert> alecs: I'm not sure, but in the meantime you could try to use aptitude instead of apt-get
[22:16] <ubutom> ljsoftnet, second location in system menu, the thing with a drive icon
[22:16] <gee> Appl6 thanks so much
[22:16] <alecs> guntbert: my synaptic and update manager crashes as well
[22:16] <mmfb> Appl6: How do I know which to download?
[22:17] <ubutom> ljsoftnet, the same location the drive thingy is located and update management
[22:17] <Appl6> mmfb: Do you have 32 bit or 64 bit Ubuntu?
[22:17] <ubutom> *driver
[22:17] <Kane_Hart> will ubuntu work okay on windows 7 with 2gigs of ram in vmware?
[22:17] <ubutom> Kane_Hart, depends
[22:18] <mmfb> Appl6: Where can I find that out?
[22:18] <guntbert> alecs: from wikipedia: /var/lib/apt/lists/ : storage area for state information for each package resource specified in sources.list  - are there any files?
[22:18] <gee> Appl6 having problems with the deb now lol
[22:18] <ubutom> Kane_Hart, dependswin7 also need some of the RAM
[22:18] <rcscomp> I have done a little more work based on the troubleshooting guide and my card shows as "DISABLED" in lshw -C.  How do I enable it?
[22:18] <Octo_> hola
[22:18] <Appl6> mmfb: Paste here the results of "uname -m".
[22:18] <Appl6> gee: "Problems"?
[22:18] <Kane_Hart> I need to compile some code id give it 1gig ram and the cpu is like 2.5ghz duo and this would only be all via SSH no gui
[22:18] <mmfb> appl6: i686
[22:18] <nmvictor> i am running lucid, the application "System>Preference>Power Management", is it supposed to have an "On Battery Tab"
[22:18] <alecs> guntbert:  yes .... here are a lot of files
[22:18] <ubutom> Kane_Hart, so you can't really expect win7 to run great while the vm is running, if you give it more than 512MB it will be even slower
[22:19] <gee> Appl6 yeah doesnt want to install because the one i have is >= the one i've downloaded
[22:19] <lungan> Having som audiotrouble in ubuntu 10.04, If i start firefox before spotify or antything else, the sound only works in firefox (yuotube etc), but if I start spotify first, the sound only works in spotify
[22:19] <ubutom> Kane_Hart, should work
[22:19] <Appl6> mmfb: At the bottom of the page you'll see "Download libgtk1.2", choose the i386 one.
[22:19] <Kane_Hart> okay better yet then. Macbook osx10 4gigs ram duo 2.4ghz
[22:19] <Octo_> Can anyone help me with a [errno 5] i/o error in Ubuntu 10.04 install? No luck with the official fix... =[
[22:20] <guntbert> alecs: look at http://ubuntuforums.org/showthread.php?p=9436138  post #4
[22:20] <CaptainTrek> Octo_:  an input/output error could point to issues with your hard drive
[22:20] <mmfb> appl6: That was strange.
[22:20] <nmvictor>  i am missing "On Battery" tab in my System>Preference>Power Management, is this the default case in Lucid?
[22:20] <mmfb> appl6: After downloading my browser shut down
[22:21] <Octo_> It's a brand new WD 1Tb, I hope not... XP went on just fine, but can't get ubuntu to work...
[22:21] <gothenburg> :)
[22:21] <gothenburg> Octo_: ntfs?
[22:21] <Octo_> I partitioned 250gb for xp in ntfs
[22:22] <nmvictor> anyone please, does System>Prefence>Power Managemnt have a tab for "On Battery"?
[22:22] <alecs> guntbert: same problem
[22:23] <guntbert> nmvictor: here yes
[22:23] <Appl6> gee: You're entering uncertain territory.  You can pass --force-downgrade to dpkg, but this is risky business, and could seriously mess up your system.
[22:23] <rallias> how would i go about making a feature suggestion for a future version of ubuntu?
[22:23] <Appl6> gee: If you really want to play this game, make sure you have a backup now.
[22:23] <Vooloo> custom bashprompts anyone? can you do line draws in gnome terminal?
[22:23] <nmvictor> guntbert: are you runnung Lucid, apparantely i dont have that in my Lucid powerpc
[22:24] <guntbert> alecs: then I have to give up - I just don't know enough about apt -- sorry
[22:24] <guntbert> nmvictor: yes, fresh installed
[22:24] <MeanEYE> Vooloo, private?
[22:24] <gee> Appl6 yeah not going to bother. I have my set up just the way i want it haha.
[22:24] <mmfb> Appl6: Error: Dependency is not satisfiable: libglib1.2ldbl (>= 1.2.10-18)
[22:24] <nmvictor> can anyone else confirm what guntbert is saying...
[22:24] <gee> Appl6 mmfb yeah thats what i got
[22:25] <mmfb> Appl6: That's the Status I get when try to install the package.
[22:25] <Appl6> gee: You told me something totally different.
[22:25] <gee> Appl6 lol i just looked at the >=
[22:26] <Appl6> gee: mmfb: That error is really easy to fix.  Just go back to the page you downloaded the package from, and under "Other Packages Related to" you'll see "libglib1.2ldbl".  Download that one, too, and install it first.
[22:26] <gee> Appl6 thanks :)
[22:26] <whodat> I got a pair of usb to cat5 extenders, but my webcam isnt seen on them, do I need a module built or called? not in lsusb or dmesg
[22:27] <gee> Appl6 what is this package? i dont delve into this much
[22:27] <Izinucs> whodat: so the camera is usb and connected to the cable that eventually plugs into the network?
[22:28] <kb-allstar> when i try to reload my synaptic package manager, i get an error message, and the same error message comes after i check for updates too
[22:28] <mmfb> Apple: The i386 package, again?
[22:28] <whodat> noizi
[22:28] <SamuelPeterson> Hi, I have a windows recovery partition that I need to remove from a friend's computer so he doesn't accidentally use it.
[22:28] <alecs> guntbert:  lool fixed
[22:28] <gee> mmfb yeah thats your computer architecture :)
[22:28] <guntbert> alecs: what was it?
[22:28] <alecs> list cache :
[22:28] <whodat> izinucs usb dongle for cat5 cable
[22:29] <taggie> izinucs, usb-cat5-usb, cat5!=ethernet, just uses the same cable.
[22:29] <SamuelPeterson> I have a windows recovery partition that I need to remove from a friend's computer so he doesn't accidentally use it. Would anyone know how to remove it and make it so that 'update grub' will not automatically re-add it?
[22:29] <guntbert> alecs: and how did you solve it?
[22:30] <alecs> guntbert:  " cd /var/lib/apt ; sudo rm -rf lists; mkdir -p lists/packages ; sudo chown -R root:root ./lists "
[22:30] <Izinucs> whodat: taggie ah.. then I have no answers.. to bad its usb at both ends otherwise you'd be dealing with ip issues as long as the cam works normally
[22:30] <OpenSourcedNick> *hyp*
[22:31] <wildbat> SamuelPeterson, you wanna REMOVE it from disk or just from grub?
[22:31] <OpenSourcedNick> christ
[22:31] <mmfb> Appl6: After installing the package I get the same error message: Error: Dependency is not satisfiable: libgtk1.2-common (>= 1.2.10-18.1build2)
[22:31] <alecs> guntbert: after that ...  "sudo apt-get update"
[22:31] <OpenSourcedNick> just restarted to update my ubuntu and my computer was beeping like crazy, what gives?
[22:31] <gee> mmfb Appl6 yeah i'm getting the same lol
[22:31] <SamuelPeterson> wildbat: just from grub. I do not want to remove the partition.
[22:31] <guntbert> alecs: thx for reporting back - I glad you got it working again :-)
[22:31] <kb-allstar> this is the error message i am getting
[22:31] <whodat> izinucs modprobe usb dongle module?
[22:32] <kb-allstar> Failed to fetch http://ppa.launchpad.net/user/ppa-name/ubuntu/dists/lucid/main/binary-i386/Packages.gz  404  Not Found
[22:32] <kb-allstar> Some index files failed to download, they have been ignored, or old ones used instead.
[22:33] <alecs> guntbert: i am just glad that i have root access ... and i can just rm -rf anything is problematic ... if i'd was on WindBlows  i could not fix it without reinstall
[22:33] <gee> mmfb waw this is slightly annoying. i normally never give up untill i get something working haha
[22:33] <guntbert> kb-allstar: that file doesn't exist - disable the ppa for now
[22:33] <wildbat> SamuelPeterson, you can modify the script in /etc/grub.d/30_os-prober, or change then partition type of that partition to ntfs -hidden
[22:34] <kb-allstar> guntbert: i don't know how to disable a ppa
[22:34] <guntbert> alecs: yes
[22:34] <mmfb> gee: I hear ya, man. This is just ridiculous, though. Although, I expect it right now because I have no clue what I'm doing with most Linux programs.
[22:34] <Masshuu> ubuntu server 10.04 is magical. evyerything just works. when i tried to get 9.04 working like 7 months ago, nothing worked right, and it took me several days to figure it out
[22:35] <alecs> Masshuu, you learned meanwhile ...
[22:35] <gee> mmfb i have a little bit of a clue. but what we're doing i have no idea about
[22:35] <Masshuu> no
[22:35] <mkquist> quick one - 10.4 doesnt do the two finger touchpad scroll on asus netbooks... is there a fix?
[22:35] <guntbert> kb-allstar: you did enable it though? go to system/adminstration/software sources, tab "other software" and uncheck this ppa
[22:35] <Masshuu> i installed postfix, and it worked properly witout any work
[22:35] <SamuelPeterson> wildbat: How do I make it ntfs -hidden?
[22:35] <Masshuu> i remember last time spending like 4 hours trying to understand the config files
[22:36] <kb-allstar> thanks guntbert
[22:36] <kb-allstar> i forgot i did that
[22:36] <guntbert> kb-allstar: no problem
[22:36] <alecs> Masshuu yeah ... for example i am using "ispConfig" and they have a tutorial to make an Ubuntu 10.04 box a server in minutes :D
[22:37] <Appl6> gee: mmfb: Do the same thing as last time.
[22:37] <Appl6> gee: mmfb: You got the same error message as last time, with a new package; you know how to fix this.
[22:38] <Masshuu> i guess the fact that the ubuntu 10.04 package i selected for my vps didn't even have nano, wget, man, and ive forgotten everything else i needed to install
[22:38] <Masshuu> htop
[22:38] <mmfb> Appl6: You're underestimating my newbie-ness. lol
[22:38] <whodat> I got a pair of usb to cat5 extenders, but my webcam isnt seen on them, do I need a module built or called? not in lsusb or dmesg
[22:38] <guntbert> kb-allstar: by the way: that is no valid ppa -- instead of ppa-name you must use the real name of that ppa
[22:39] <kb-allstar> ok, thanks :)
[22:39] <kbsmasher> I have a laptop which is giving me trouble.  It is Windows Vista, so the C:\ and D:\ are both NTFS.  Long story short, the Recovery Partition (D:\) is corrupt.  Is there a free utility that might reciver an NTFS partition?
[22:40] <kbsmasher> *recover
[22:40] <gee> Apple6 installed the other package you told us to, the original package has the same error
[22:40] <dj_segfault> I'm trying to fix the window buttons on Lucid so they're on the right where they're supposed to be.  I did the gconf-editor, apps/metacity/general/button_layout to ":minmize,maximize,ckise" thing, but they're still on the left.  I even tried logging out and back in.  WHat else can I try?
[22:40] <alket> how long does shipping from ubuntu shop take ?
[22:41] <kbsmasher> If I can get it to read again, all I'd have to do is Ghost it to another drive.  I think the HD is toast, but it is so much so, now ><
[22:41] <CaptainTrek> alket: to what country?  took a week or so for my last purchase from the ubuntu shop (I"m in the USA)
[22:41] <MeanEYE> dj_segfault, private?
[22:41] <alecs> Masshuu, yes ... that is a problem  on vps
[22:42] <gigasoft> how to format usb flash from terminal?
[22:42] <dj_segfault> MeanEYE: You mean you want to PM me?  Yes.
[22:42] <alecs> kbsmasher: try #windows  please
[22:42] <ubutom> kbsmasher, if it is really valuable data I would consider giving the hd to specialists
[22:42] <alket> CaptainTrek, I live in Kosovo I don't know if they even ship here but Im just curios to know who much i should wait before i realise that they don't ship here
[22:42] <whodat> how do you corrupt a recovery partition?
[22:42] <CaptainTrek> alket: *shrugs* could be days, weeks, months, or longer, dont know what to tell ya
[22:43] <mkquist> dj_segfault: change to an older theme that had the buttons that way
[22:43] <rww> alket: http://shop.canonical.com/contact_us.php
[22:43] <kbsmasher> The data has already been backed up...I could get discs from HP, but that would cost $$$.  I though Linux might have something free...all Windows software is in the ~$70 range, which is more than the HP recovery discs
[22:43] <alket> rww I sent a letter to them weeks ago but they don't reply
[22:44] <whodat> kbsmasher could try ddrescue
[22:44] <rww> alket: I'd consider whether you should buy stuff from a store that doesn't bother replying to you, then :\
[22:44] <kbsmasher> whodat: The machine seems to be doing a good job of it...I think the HD is failing.
[22:44] <djharsk> Is there a file to add "shortcuts" to ALT+F2?
[22:44] <Shapeshifter> How can I get rid of the password prompt on the keyring? Everytime I boot up, if asks for the password to be able to connect to the protected WPA wlan.
[22:44] <djharsk> (Using gnome)
[22:44] <Shapeshifter> I don't want to enter the keyring password, ever.
[22:44] <alket> rww but I really want to have those stuff
[22:45] <gothenburg> djharsk: check among the keyboard settings
[22:45] <guntbert> Shapeshifter: if the keyring protects only your wlan password you can remove the keyring password
[22:46] <Shapeshifter> guntbert: how? I looked in the menus but I can't find a keyring setting. Probably not looking hard enough...
[22:46] <piper69> i have a question: how can i make a specific permission for a specifc folder so that i don't have to edit permissions every time i add a file to that folder please
[22:46] <djharsk> gothenburg: Uh, perhaps I wasnt precise enough. But WHEN I press ALt+F2, and write, perhaps chromium-browser, I want to just write "chrome", and it launches the chrome browser
[22:46] <Albatorsk> Hello. Running Ubuntu Server 10.04. I want to add a domain or search keyword to my resolv.conf, but it says not to add anything as it will be overwritten. Where do I add it?
[22:46] <chris12349> anyone know how to hide the little handles on the gnome panel applets?
[22:46] <whodat> I got a pair of usb to cat5 extenders, but my webcam isnt seen on them, do I need a module built or called? not in lsusb or dmesg...
[22:46] <petsbath> Hello, After installing my server and trying to run some query script I had some problems,,, apparently my jQuery is in strict mode.. Any one knoww how to change this?
[22:47] <gee> mmfb Appl6 managed to get the deb installed by installing the libgtk1.2-common.deb first. still not working..think i might need to restart?
[22:47] <Guest83452> oooooooooo
[22:47] <Shapeshifter> guntbert: nvm found it in the app menu
[22:47] <rww> Albatorsk: are you using a static or DHCP connection?
[22:47] <Kamilion> Anyone else having trouble adding PPAs? keyserver.ubuntu.com isn't playing nicely.
[22:47] <Guest83452> kereis reto alguno
[22:47] <Shapeshifter> guntbert: thanks mate
[22:48] <gee> mmfb back shortly
[22:48] <Albatorsk> rww: Both. One network card is set to DHCP and two are set to static.
[22:48] <piper69> can someone help me please how can i make a specific permission for a specifc folder so that i don't have to edit permissions every time i add a file to that folder please
[22:48] <maxi__> Hijos de putaaa...
[22:48] <alket> Is there any Download Manger for Firefox that filters file like mp3, oga to Music Folder jpg,png to Pictures folder etc. Down Them All addon offers a filter but I fail to understand it how it works
[22:48] <maxi__> Hijos de putaaa...
[22:48] <rww> !ar | maxi__
[22:48] <maxi__> Hijos de putaaa...}
[22:48] <maxi__> Hijos de putaaa...}
[22:48] <bazhang> maxi__, stop that
[22:48] <Kamilion> I need to install thunderbird 3 -- but add-apt-repository ppa:ubuntu-mozilla-daily/ppa won't work right now. Anyone know a workaround I can use while keyserver.ubuntu.com isn't working?
[22:48] <Guest83452> maxi bete a la mierda
[22:48] <hardy> hello
[22:49] <guntbert> Shapeshifter: you're welcome :-) its a little trick to remove it there - but my keyring daemon isnÄt running so I cannot really tell you the way
[22:50] <rww> Albatorsk: hrm. For dhcp connections, that sort of thing is set in /etc/dhcp3/dhclient.conf if I remember correctly. I'm not sure how it would work with more than one network interface.
[22:51] <Albatorsk> rww: Ok. I'll take a look at that. Thanks!
[22:51] <whodat> I got a pair of usb to cat5 extenders, but my webcam isnt seen on them, do I need a module built or called? not in lsusb or dmesg
[22:51] <Slither> hi
[22:51] <guntbert> !hi | Slither
[22:52] <djharsk> gothenburg: nevermind, I figured it out. I just have to add a shellscript the /usr/bin :)
[22:52] <Albatorsk> rww: Of course it is. Why didn't I think of that? Thank you once again.
[22:52] <Slither> D
[22:53] <Slither> do some one 1 think i can get a job whit  offensive security in USA
[22:53] <rww> !ot | Slither
[22:54] <whodat> I got a pair of usb to cat5 extenders, but my webcam isnt seen on them, do I need a module built or called? not in lsusb or dmesg..
[22:55] <whodat> nobody?
[22:55] <Slither> that was hard
[22:55] <gee> mmfb you got it yet?
[22:55] <Slither> hi 1 more time
[22:56] <mmfb> Nah. I found a code I'm trying. It's downloading right now.
[22:56] <mmfb> gee: If I have any luck I'll update you.
[22:56] <gee> mmfb ok mate cheers
[22:56] <Slither> offensive security
[22:56] <gee> mmfb i wasnt even looking to play this untill you started talking about it lol
[22:57] <Slither> it is hard to get a job in USA whit offensive security
[22:57] <bazhang> !ot | Slither
[22:57] <whodat> ho do I reset my kb shortcuts back to defaults?
[23:00] <mmfb> gee: Haha, sorry, man.
[23:00] <mmfb> gee: Appl6: I think I got it!
[23:00] <gee> mmfb oh what you do?
[23:01] <mmfb> gee: wget -c http://ftp.games.skynet.be/pub/wolfenstein/et-linux-2.60.x86.run
[23:01] <mmfb> gee: put that command in
[23:01] <gee> mmfb newer version? lol i was just looking at that
[23:02] <banker247> is there a simple/safe way to backport php 5.3 to 5.2?
[23:02] <mmfb> gee: After it's done do   sh ./et-linux-2.60.x86.run
[23:02] <unop> !prevu | banker247
[23:02] <gee> mmfb yup :) 3 mins to download
[23:02] <iKb> i have a big problem, the gnome-power-manager alwaysw show fully-charged battery
[23:03] <mmfb> gee: During the install process I'm asked to enter an install path. It won't let me use the default path.
[23:03] <gee> :S lol this isnt a good night is it
[23:04] <mmfb> gee; Do all folder paths start with usr? or do I use my username? Ex. mmfb/local/Downloads
[23:04] <Serraphyn> If your not a great programmer what is ubuntu good for?  I mean linux in general has very few native games so its not a great game machine so what else is there if you to dumb to code?
[23:05] <gee> mmfb i have never used xubuntu so i'm not sure if its different
[23:05] <MeanEYE> Serraphyn, anything you need?
[23:06] <Appl6> gee: mmfb: So what's the status?
[23:06] <Serraphyn> MeanEYE, Well the only thing I did in windows 7 really was work on php, play Valve Games and dream of being a programmer.  PHP I already work on but I don't see games that work without a ton of emulation and configuration that I think I'm to dumb for.
[23:06] <gee> Appl6 mmfb seems mine has installed
[23:07] <Appl6> gee: Does the game work?
[23:07] <RegressLess> ubuntu 9.04 Where is the default installation directory for Firefox?
[23:08] <MeanEYE> Serraphyn, there are a lot of native games for linux... besides, you can always learn another programming language :D
[23:08] <gee> Apple6 mmfb game works :)
[23:08] <banker247> anyone have experience with vtigercrm?
[23:08] <gee> mmfb Apll6 no sound though. 2 secs
[23:08] <gee> mmfb Appl6 https://help.ubuntu.com/community/EnemyTerritory
[23:08] <mmfb> gee: How do you gain root permissions?
[23:08] <CaptainTrek> mmfb: sudo <command>
[23:08] <gee> mmfb sudo
[23:08] <Vooloo> how do I know what firewall is on? ps aux does not display iptables
[23:08] <Serraphyn> MeanEYE, I have tried, but the books and docks on stuff are hard for me to follow and game wise unless I want to play games from what look like mid 90s nintendo I have yet to find much for linux.
[23:09] <gee> mmfb that what you mean?
[23:09] <CaptainTrek> mmfb: where <command> is whatever command you want to run as root
[23:09] <MeanEYE> Serraphyn, what type of games are you interested in ?
[23:09] <mmfb> gee: CaptainTrek: Every time I try set up a directory I'm told "No write permissions <directory>"
[23:10] <gee> mmfb what you typing to exicute the .run file?
[23:10] <CaptainTrek> mmfb: it means that whatever directory you're creating your directory in is protected so you can't create it there
[23:10] <Serraphyn> MeanEYE, I used to play games like Team Fortress 2 and Force Unleashed.  Also like playing MMORPGs but I don't see any that really work well in linux emulated or not
[23:11] <the_madman> Lo everyone.
[23:11] <mmfb> gee: sh ./et-linux-2.60.x86.run
[23:11] <MeanEYE> Serraphyn, well, there are things like Quake Live, which is quite good. Then there's number of ported games...
[23:11] <Serraphyn> mmfb, is that enemy territory?
[23:11] <gee> mmfb try sudo sh ./et-linux-2.60.x86.run
[23:11] <mmfb> Serraphyn: Yeah
[23:11] <Serraphyn> mmfb, Where did you d/l that from I have yet to find a site it works from
[23:12] <gothenburg> isn't it time to sleep?
[23:12] <gee> Serraphyn wget -c http://ftp.games.skynet.be/pub/wolfenstein/et-linux-2.60.x86.run
[23:13] <mmfb> gee: Could you hook Serraphyn up? I'm busy messing with the install
[23:13] <gee> mmfb already have
[23:13] <sechs> hello!
[23:13] <guntbert> Vooloo: sudo iptables -L will give you a list of active rules
[23:13] <gee> sechs hello again. any luck with your drivers?
[23:13] <sechs> i tried the memtest, and it didnt found any error, and no, im not lucky today
[23:13] <Serraphyn> gee: will this work okay on amd64 system?
[23:14] <ohzie> Hey everybody! =)
[23:14] <Serraphyn> Hi Dr. Ohzie
[23:14] <Vooloo> gee: 404?
[23:14] <gee> Serraphyn thats what i'm running. had to install gtklib1.2
[23:14] <Vooloo> guntbert: right, but what process is the firewall in ps aux? or is it not there?
[23:14] <gee> Vooloo ?
[23:14] <ohzie> Is there a way to enable sata hotswap support?
[23:14] <guntbert> Vooloo: no, it is the kernel itself
[23:14] <Vooloo> gee: 404 on et
[23:14] <Serraphyn> gee, I see if I have them installed to be safe
[23:14] <mmfb> gee: Worked. Installing now
[23:14] <JimmyNeutron> How come "sudo apt-get upgrade" does not install the linux kernel update?
[23:14] <Vooloo> guntbert: ah
[23:15] <banker247> when i do a command.. sudo chmod -R a+rw /var/www
[23:15] <gee> mmfb great! i'm trying to get my sound working now
[23:15] <the_madman> I act as tech support for my family, and I've set up a remote desktop server on one of the computers with the standard Ubuntu tool.
[23:15] <banker247> does that enaable recursevly access to all files within folders and subfolders of this directory?
[23:15] <gee> Vooloo ok sorry i must have got it wrong
[23:15] <Ginbun2> it seems the new Ubuntu release has a lot of changes in the ways software are configured
[23:15] <guntbert> banker247: yes and it is a *very bad idea*
[23:15] <Serraphyn> gee, apt-get install gtklib1.2 package not found :(
[23:15] <Ginbun2> now I can't even do /etc/init.d/gdm stop
[23:15] <the_madman> From another Ubuntu machine, Applications --> Internet --> Remote Desktop Client connects and works well.
[23:15] <gee> Serraphyn Vooloo wget -c http://ftp.games.skynet.be/pub/wolfenstein/et-linux-2.60.x86.run
[23:16] <banker247> guntbert why if i am the only user?
[23:16] <gee> Serraphyn yeah you have to look up the packages two secs i'll get the page
[23:16] <Serraphyn> o.O
[23:16] <Serraphyn> okay thanks
[23:16] <the_madman> But on my Kubuntu machine, even though the server appears in KRDC, double-clicking it results in, "Server not found" errors.
[23:16] <Vooloo> gee: found itin the dir list
[23:16] <matumba> hello, quakelive sometimes leaves my gamma setting changed like ingame after closing firefox, any smart command to set it back to default?
[23:16] <gee> Serraphyn http://packages.ubuntu.com/search?suite=default&section=all&arch=any&searchon=names&keywords=libgtk1.2
[23:16] <the_madman> Is there something else I need to install for KRDC to work properly with VNC?
[23:17] <sechs> i have more problems, seing that the one with freezes will not get solved soon. I have installed pydance, and it gets an error, and dont start running. the message that appears is "sr0: CDROM not ready.  Make sure there is a disc in the drive." anyone know why?
[23:17] <MeanEYE> matumba, you can always write your config
[23:17] <Serraphyn> gee, so I install gimp I guess?
[23:17] <gee> mmfb can you remember what Appl6 said that other thing we were to download was? before Libgtk1.2.deb would work?
[23:17] <guntbert> banker247: because if anyone gets remote access to your machine he can write there too - giving rights to "all" is very rarely necessary
[23:17] <gee> Serraphyn i already had it installed lol
[23:18] <Serraphyn> I was gonna install it anyways as I use it alot
[23:18] <matumba> MeanEYE, QL works fine but after closing firefox the screen stays bright. restarting the X server works but that's a rather bad solution.
[23:18] <Appl6> Serraphyn: You need http://packages.ubuntu.com/jaunty/libgtk1.2 .
[23:18] <ubutom> sechs, you got the disc of that game?
[23:18] <MeanEYE> oh...
[23:18] <MeanEYE> hm, matumba can we chat private...
[23:18] <sechs> ubutom, nop, it used to work fine, because i have it instaled on my computer. I installed it from the console....
[23:18] <Appl6> Serraphyn: If it complains about unsatisfiable dependencies, check that same page for the names of those packages, so you can download and install them first.
[23:19] <Serraphyn> Appl6, okay thanks
[23:19] <zap117> dont know if im in the right place but can any one help me with installing ubuntu on a raid0 system ?
[23:19] <sechs> ubutom when i installed some songs it ask for the cdrom, but i not have any cd rom. I never have it
[23:19] <gee> mmfb Appl6 Serraphyn i aint got no sound but i have the game working at least lol
[23:20] <Vooloo> I had a window manager before that would "minimize" the window to only a titlebar when you double clicked the tiblebar, can this be done? maybe with compiz?
[23:20] <ubutom> sechs, homepage says : Reads DWI, SM, and KSF files, in addition to its own .dance format.
[23:20] <Serraphyn> gee Appl6 http://packages.ubuntu.com/jaunty/libgtk1.2
[23:20] <Serraphyn> er
[23:20] <ubutom> sechs, so you have to have some sort of file for it to work, if it worked before
[23:20] <Serraphyn> gee Appl6 ./setup.sh: 289: /root/.setup12491: not found
[23:20] <Serraphyn> when I sudo sh et-linux*
[23:20] <zap117> anyone ?
[23:21] <ubutom> sechs, nah, seems it has music included, then i don't know... have you tried reinstalling it?
[23:21] <Appl6> Serraphyn: Why is it in /root?  Where are you running setup.sh from?
[23:22] <Serraphyn> Appl6, I sudo -i wget it to /root and was doing sh et-linux*
[23:22] <sechs> ubutom I tried, but if I install more songs in .dwi format, it dont work! if it runs I cant dance, but if I can dance it dont run!
[23:22] <banker247> guntbet is there a way to check which areas have fulll 777 permissions?
[23:23] <ubutom> hhm, strange sechs
[23:23] <Appl6> Serraphyn: Don't wget it to root.  Move it to your home folder or to Downloads or something.
[23:23] <mmfb> gee: OH THANK GOD! I finally got out of it.
[23:23] <mmfb> gee: It's SUPER slow for some reason.
[23:23] <mmfb> gee: It seems like every game I play runs stupid slow.
[23:23] <JimmyNeutron> How come "sudo apt-get upgrade" does not install the linux kernel update?
[23:24] <zap117> my installation only finds 1 out of 2 raid0 arrays
[23:24] <Appl6> JimmyNeutron: Does it give you any errors or warnings?
[23:24] <Serraphyn> Appl6, same error just different dir.
[23:24] <hiexpo> JimmyNeutron,  you answered your own ?
[23:24] <JimmyNeutron> Appl6, It just tells me its held back
[23:24] <sechs> ubutom, Im getting familiar with strange things with ubuntu
[23:25] <JimmyNeutron> Appl6, If I use the Update GUI app, than it installs
[23:25] <ubutom> sechs, pydance has hardly much to do with ubuntu
[23:25] <Appl6> JimmyNeutron: So is it installed or not?
[23:25] <JimmyNeutron> I'm just trying to understand why the CLI commands don't work, but the GUI update works
[23:25] <gee> mmfb i just get kicked out of the game when i try to connect to a server now lol
[23:25] <Serraphyn> Gee, Appl6 : http://www.pastie.org/1001386 <-- what am I doing wrong?
[23:26] <Appl6> Serraphyn: Make sure you chown those files, since you downloaded them as root.
[23:26] <shane2peru> is there a simple way to have a script confirm before removing a file? rm should ask for confirmation, but it doesn't ???
[23:26] <JimmyNeutron> Appl6, Using the CLI commands, it does not work....using the GUI update program, it works
[23:26] <Serraphyn> Appl6 I did a chmod 777 on them
[23:26] <gee> Serraphyn not seen that before :S
[23:27] <unop> shane2peru, rm -i ...
[23:27] <Serraphyn> its okay Gee, I think I'm cursed when it comes to computers
[23:27] <guntbert> banker247: find / -perm 777
[23:27] <Appl6> Serraphyn: It's telling you that a file doesn't exist.  Does it exist?
[23:27] <MeanEYE> shane2peru, in terminal type alias, and check if there are no aliases defined for rm
[23:27] <sechs> ubutom i also tryed to use stepmania with wine, but my wine dont works, so my last hope was pydance.
[23:27] <Appl6> JimmyNeutron: Once you upgrade the kernel, you can't upgrade it again to the same version.
[23:27] <Serraphyn> Appl6 what file? I'm not controlling what it does after I do the .run file, did you look at the link I posted?
[23:27] <Appl6> JimmyNeutron: So if you've already upgraded it with the GUI, then you're not going to be able to upgrade it again.
[23:27] <Onepamopa> hi all
[23:28] <MeanEYE> Onepamopa, hi! :D
[23:28] <mmfb> I'm running 1Gb RAM and 2.2Ghz processor. Why are older games like Wolfenstein: EM running so slow even on the "fastest" settings?
[23:28] <ubutom> sechs, you could always try to contact the makers of pydance
[23:28] <shane2peru> unop, thanks!!!
[23:28] <MeanEYE> mmfb, compiz maybe?
[23:28] <Serraphyn> mmfb, what video card?
[23:28] <Onepamopa> So.. I'm looking for a way to scan all incomming connections to my linux server for proxy (3-4 defined ports)
[23:28] <Appl6> Serraphyn: Don't get snarky.  The pastebin says "./setup.sh: 273: /home/serraphyn/.setup12608: not found", where it's clearly telling you that it cannot find this particular file, "/home/serraphyn/.setup12608".  I'm asking if it exists.
[23:28] <mmfb> My XP SP2 with 1Gb RAM and 1.8Ghz processor runs it just fine.
[23:28] <Onepamopa> any way of doing that ?
[23:28] <JimmyNeutron> Appl6, it was the default kernel for 10.04, 2.6.32-21 and sudo apt-get upgrade tells me there is a 2.6.32-22 but the kernel update is being held back
[23:28] <mmfb> I'm not sure. How can I tell?
[23:28] <ohzie> Hey does anyone know how to use drivers built for, say, RHEL/FC or SUSE?
[23:29] <Daekdroom> mmfb, videocard, driver version and compiz on or not will matter.
[23:29] <mmfb> I got this computer with Linux preinstalled on it from a friend.
[23:29] <Serraphyn> Appl6, sorry I wasn't trying to be snarky, just I didn't make that file so let me check
[23:29] <Appl6> JimmyNeutron: Why do you say that the GUI succeeded in upgrading it?  If there's still an upgrade then the GUI didn't do it either.
[23:29] <sechs> ubutom, i think i will install an older version of ubuntu. My pc dont like 10.04
[23:29] <mmfb> How can I check all that without taking a screwdriver to my tower?
[23:29] <Serraphyn> Appl6 no it does not exist
[23:29] <MeanEYE> Onepamopa, realtime?
[23:29] <Daekdroom> mmfb, glxinfo | grep OpenGL
[23:30] <Onepamopa> I'm looking for a way to scan all incomming connections to my linux server for proxy (3-4 defined ports) and then filtering them via apf
[23:30] <Onepamopa> anyone?
[23:30] <sechs> maybe is the best way to solve my problems. I really dont want to get windows again...
[23:30] <Appl6> Serraphyn: If you looked for it with ls, make sure you do "ls -A", otherwise it won't display hidden files.
[23:30] <Daekdroom> mmfb, and go to System > Preferences > Appearances > Visual Effects, check if it's off.
[23:30] <JimmyNeutron> Appl6, Before the update, I did a "uname -a" and it shows the kernel as 2.6.32-21.  After the GUI update and a reboot, "uname -a" shows the kernel as 2.32-22.  So the GUI update did update the kernel
[23:30] <Appl6> JimmyNeutron: Try "aptitude why-not <pkg>" where <pkg> is the name of the package being held back.
[23:31] <Appl6> JimmyNeutron: OK, so if you've updated the kernel, why are you trying to re-update it from the command line?  It has already been upgraded.
[23:31] <Serraphyn> Appl6, its not there and I did ls ~/set<tab><tab><tab> and ls -A
[23:31] <JimmyNeutron> Appl6, Thanks!  Re-install 10.04 from scratch again and will try that CLI command.
[23:31] <mmfb> Daekdroom: How do I get there on Xubuntu?
[23:31] <ubutom> sechs, well, could solve some problems
[23:31] <zap117> is this the right place for installation help?
[23:31] <Daekdroom> mmfb, well, glxinfo | grep OpenGL has to be ran on a terminal, it's somewhere under the app menu.
[23:32] <Vooloo> anyone have a script that parses iptables log and rewrites into human readable form in another log file?
[23:32] <JimmyNeutron> Appl6, I'm just trying to understand why the first time I ran "sudo apt-get upgrade", it didn't download and install the new kernel, 2.6.32-22
[23:32] <JimmyNeutron> Appl6, and only after I use the GUI update, did the kernel got upgraded
[23:33] <Appl6> JimmyNeutron: From the error message, it means that someone or something told apt "don't upgrade the kernel!".  You can do that manually, or another program can say "I don't work with newer versions of the kernel, so don't upgrade it."
[23:33] <Serraphyn> JimmyNeutron, I think the kernel upgrades from commandline are require special setting to do.
[23:33] <mmfb> Daekdroom: glxinfo | grep OpenGL brought up the info... Which do I need to find out what I'm running?
[23:33] <Daekdroom> !pastebin | mmfb
[23:33] <Appl6> JimmyNeutron: I'm assuming the GUI just didn't tell you that the package was held, and it just upgraded it anyway.
[23:33] <Daekdroom> Paste the info there.
[23:33] <Daekdroom> and the link shoulds come here
[23:33] <Daekdroom> *should
[23:33] <JimmyNeutron> Appl6, That's correct.  The GUI didnt care and went ahead w/ the upgrade.
[23:33] <Appl6> JimmyNeutron: But since you've already upgraded it, the information that would tell you what was really going on isn't there any more.
[23:34] <Appl6> JimmyNeutron: So there probably isn't a good way to figure out now what happened.
[23:34] <mmfb> Daekdroom: What do I do with !pastebin | mmfb?
[23:34] <WikkidByDesign> I'm having an issue installing Ubuntu 10.04 onto a Compaq Presario 6000. the cd keeps saying I/O error. When i install 8.10-9.10 it will install fine, but apt-get is always corrupted. Windows XP will install fine
[23:34] <JimmyNeutron> Serraphyn, Do you know what paramters needs to be pass to force the kernel upgrade from CLI?  I'm using "sudo apt-get update" followed by "sudo apt-get upgrade"
[23:34] <Appl6> Serraphyn: JimmyNeutron: You don't need to do anything special at all.
[23:34] <Daekdroom> mmfb, you don't do nothing with that, it's just that I used it so the bot would show you http://paste.ubuntu.com , which is where you should paste the output of glxinfo | grep OpenGL
[23:34] <Appl6> Serraphyn: Do you need to run the installer as root?
[23:35] <sechs> ubutom, and if I install kubuntu? it will be easy to use like 10.04?
[23:35] <JimmyNeutron> Appl6, I'm wiping out my install and starting over w/ a clean fresh install of 10.04.
[23:35] <Serraphyn> Appl6, I think I found the answer, ia32-libs are not installed
[23:36] <Appl6> JimmyNeutron: OK.  I'd recommend using "aptitude" instead of "apt-get" for command line package management.
[23:36] <guntbert> !md5sum | WikkidByDesign did you check?
[23:36] <ubutom> sechs, yep, though I don't know how different it is, haven't used kde in a while
[23:36] <mmfb> Daekdroom: http://paste.ubuntu.com/448448/
[23:37] <Serraphyn> Appl6, that was the problem ia32-libs needed to be installed, works fine now
[23:37] <Daekdroom> mmfb, uh oh. You're running on no hardware driver.
[23:37] <ubutom> sechs, and maybe you'll run into the same freeze problem, worth a try I would say
[23:37] <Daekdroom> mmfb, do a lspci and pastebin it
[23:37] <JimmyNeutron> Appl6, Thanks!  I'll look into it and see what are the diff between apt-get and apititude
[23:37] <Daekdroom> mmfb, so we can find out which is your videocard
[23:37] <sechs> ubutom, im dammned with linux, then....
[23:38] <mmfb> http://paste.ubuntu.com/448449/
[23:40] <gothenburg> :D
[23:40] <Serraphyn> Appl6, it works now just no sound and is there a way to run it in window mode?
[23:40] <gee> Appl6 Thanks for all your help mate :) mmfb Thanks for reminding me that there is a great FPS for linux :D
[23:40] <sechs> ubutom, i will try to reinstall all, if that doesnt works, i will install kubuntu. but that will wait to tomorrow. Thank you to everyone for the help really. See you soon!
[23:40] <gee> Serraphyn i aint got any sound either
[23:40] <Daekdroom> mmfb, kk. Go to system > admin > Hardware drivers and check if it prompts you any driver is avaiable
[23:40] <mmfb> gee: Haha, glad to have "helped" all though it cause you a big headache.
[23:40] <mouse> If you set /home to another partition can that partition be ntfs?
[23:41] <gee> mmfb i remember buying the game from the shop when it came out lol...fond memories :P
[23:41] <Onepamopa> mouse it cant
[23:41] <mmfb> Daekdroom: Two, both inactive.
[23:41] <gee> mmfb still have it somewhere actually lol
[23:41] <mouse> Onepamopa, It has to be ext2,3, or 4?
[23:41] <Onepamopa> mouse exactly
[23:41] <Onepamopa> btw, use 4
[23:41] <Onepamopa> it gives best results
[23:41] <Onepamopa> ;)
[23:41] <gee> Bye everyone!
[23:41] <Daekdroom> mmfb, which are they?
[23:41] <guntbert> mouse: not a good idea in any case
[23:41] <gothenburg> lol ntfs xD
[23:42] <rikkimaru> is there a way I can run lucid on a vm on top of karmic?
[23:42] <Onepamopa> ;)
[23:42] <mouse> Onepamopa, I was afraid of that.  Why 4?
[23:42] <rtronk1> hello, i used /usr/sbin/useradd -m username to create 4 accounts, i have created a main user (which i am logged in with now and has Sudo access) and then i created 3 users by the name of the domain i am hosting under that acount (example.com)
[23:42] <Onepamopa> mouse it's new, and it's fast
[23:42] <rtronk1> when i login to any of these "domain" user accts on my ssh
[23:42] <Onepamopa> our servers used ext3 ...
[23:42] <Onepamopa> untill 1 month ago
[23:42] <rtronk1> i get $
[23:42] <Onepamopa> now we use 4
[23:42] <mouse> gothenburg, I only ask about ntfs cause windows can't read ext right?
[23:42] <Onepamopa> it's WAY faster
[23:42] <FloodBot4> Onepamopa: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[23:42] <rtronk1> no user@server folder:
[23:42] <rtronk1> just $
[23:42] <MeanEYE> rikkimaru, Yes... it's called VirtualBox
[23:42] <guntbert> Onepamopa: where did you find that "it has to be ext.."?
[23:42] <mmfb> Daekdroom: VNVIDIA accelerated graphics driver (version 173) [Recommended] and NVIDIA accelerated graphics driver (version 96)
[23:43] <rtronk1> i edited .bashrc and added the same line i have for my username acct that gets username@home dir:
[23:43] <Onepamopa> guntbert well, do u use ntfs @ your linux box-es ? :)
[23:43] <rtronk1> is it because the usernames for the domains have . in them?
[23:43] <Daekdroom> mmfb, try installing the NVIDIA accelerated graphics driver, restart your system and check if the performance improves.
[23:43] <Daekdroom> mmfb, one second
[23:43] <Daekdroom> mmfb, I'll check which version is better for your card
[23:43] <ubutom_> rikkimaru, virtualbox
[23:43] <mmfb> Daekdroom: Alright.
[23:43] <Deathspawn> Meh.. any way to make it so the my Wi-Fi doesn't shut off everytime I shut my laptop on battery?
[23:43] <rikkimaru> ubutom_, cool, i'll give it a shot
[23:43] <guntbert> Onepamopa: no, I just said "not a good idea" - I only was curious because there is a difference between "not good" and "not possible"
[23:44] <Daekdroom> mmfb, according to the nvidia website, 173 should work
[23:44] <Daekdroom> mmfb, go for it, and good luck
[23:44] <Onepamopa> guntbert well, in any case - it's better to use the provided file systems
[23:44] <Onepamopa> than ntfs or something like that
[23:44] <mmfb> Daekdroom: Thanks. I'll be back in a bit to update you.
[23:44] <Onepamopa> my guess is that he wants a partition that he can access via windows too ..
[23:45] <prince_jammys> rtronk1: ssh as one of those users, and 'echo $PS1'
[23:45] <guntbert> Onepamopa: agreed :-)
[23:45] <Onepamopa> so... my question again ..
[23:45] <revygttam> Ive generated an RSA key on my ssh server and appended to available_keys on my local machine however it still only prompts for a password not my passphrase, any suggestions?
[23:45] <rtronk1> line 1$ echo $PS1 line 2  $ line
[23:45] <Onepamopa> anyone knows a good proxy detection tool ?
[23:46] <Onepamopa> bash, java... etc  ?
[23:46] <prince_jammys> rtronk1: type:  PS1='\u@\h:\w:\$ '
[23:46] <guntbert> Onepamopa: what do you mean my "proxy detection tool" ?
[23:46] <no-name> what are the main practical differences between ext2 and ext4?
[23:47] <mouse> ext3 =P
[23:47] <no-name> :P
[23:47] <Onepamopa> guntbert a tool that will help be ban all proxy ip's that are connected/connecting to my server
[23:47] <rtronk1> \u@\h:\w:$
[23:47] <prince_jammys> rtronk1: that's what you see?
[23:47] <rtronk1> ya
[23:47] <prince_jammys> rtronk1: echo $SHELL
[23:48] <MeanEYE> no-name, speed :D ...
[23:48] <rtronk1> /bin/sh
[23:48] <MeanEYE> no-name, encryptions and lots of other things
[23:48] <prince_jammys> rtronk1: make the user's shell /bin/bash
[23:48] <MeanEYE> :D
[23:48] <rtronk1> how do i do that?
[23:48] <rtronk1> lemme google first
[23:48] <prince_jammys> rtronk1: one way is to (carefully) edit it in /etc/passwd
[23:48] <no-name> MeanEYE: which is faster?
[23:49] <MeanEYE> no-name, ext4
[23:49] <no-name> k thanks MeanEYE
[23:49] <Chak82> good afternoon community
[23:49] <MeanEYE> no-name, np :D
[23:49] <mouse> Is there a way to get windows to read ext?
[23:49] <Guest81780> choonming = groooming ?
[23:49] <Chak82> can someone help me to make works gnome-art under 10.04?
[23:49] <rtronk1> prince_jammys: i am a complete newb to this, i was lucky enuff to get this going as it is now, (mysql/php/apache2/phpmyadmin and configured /working:()
[23:50] <rtronk1> any chance you could tell me a easy way to do it with no risk of fking somehting up
[23:50] <guntbert> Onepamopa: I guess you mean "open proxies"; the usual way is to ask some sort of RBL
[23:50] <no-name> mouse: hold a gun to bill gates head and tell him to add ext support to windows
[23:50] <Vooloo> anyone have a script that parses iptables log and rewrites into human readable form in another log file?
[23:50] <mmfb> Daekdroom: Runs perfectly! Thank you SO much.
[23:50] <prince_jammys> rtronk1: you may configure the user's shell in /etc/default/useradd  (and re-create the users), or edit the current ones by (carefully) editing the user's lines in /etc/passwd
[23:50] <Daekdroom> mmfb, no problem
[23:51] <Onepamopa> guntbert I want to be able to scan them via defined ports
[23:51] <Onepamopa> but... hm
[23:51] <prince_jammys> rtronk1: in the future, use the 'adduser' command, which is easier than 'useradd'.
[23:51] <mouse> no-name, If I was going to go that far I would tell him to make windows open source.
[23:51] <no-name> hehehe
[23:51] <mmfb> gee: Got it to work with the help of Daekdroom, man. Wanna play a couple rounds?
[23:52] <guntbert> Onepamopa: no way - they behave like normal browsers - but you could ask in ##networking (I never tried that)
[23:52] <Onepamopa> guntbert I'm not talking about detecting proxy @ apache ... ;)
[23:52] <Onepamopa> I already have a way of doing it
[23:52]  * Guest81780 hey mouse you watch out for big cats
[23:52] <Onepamopa> but I cant do the same for the other stuff @ our server
[23:52] <Onepamopa> ;)
[23:53]  * mouse is the mouse that ate the cat.
[23:53] <Onepamopa> mouse it depends on the cat ;)
[23:53] <mouse> lol very true.
[23:53] <guntbert> Onepamopa: then I must pass, you obvioulsy know more than I do - try ##networking
[23:53] <Guest81780> oh then you must the rat in mouse clothing
[23:54] <Onepamopa> guntbert my question isnt related to networking in general ....
[23:54] <mmfb> How do you uninstall programs within Linux? I downloaded Wolfenstein: ET for Wine, and I click on "Uninstall W: ET" from my "Others" tab, but it doesn't erase it from Linux, just uninstalls it off Wine.
[23:54] <liam_wullfin> I want to record sound from my text reader program ... can someone point me in the right direction?
[23:54] <ubutom_> mouse, theres at least a tool for ext3 i used some time ago, forgot it's name though
[23:54] <guntbert> Onepamopa: but even less to ubuntu support :-)
[23:54] <Onepamopa> well, everyone has to start from somewhere
[23:54] <Onepamopa> ;)
[23:55] <Chak82> hello, i have some problems with gnome-art
[23:55] <Talbots> ok i will come back in few weeks
[23:55] <Chak82> this not open
[23:55] <Daekdroom> mmfb, it is unninstalled from wine, but for some reason the menu shortcuts are still there
[23:55] <mouse> liam_wullfin, Do you mean it's still in the menu?
[23:55] <mmfb> Daekdroom: What about programs for Linux that are on Add/Remove Applications?
[23:56] <Daekdroom> mmfb, those should vanish normally.
[23:56] <mmfb> Daekdroom: not*
[23:56] <Daekdroom> mmfb, ah, no idea.
[23:56] <Daekdroom> mmfb, not being there is too vague.
[23:56] <mmfb> Daekdroom: Maybe just delete the containing folders?
[23:56] <liam_wullfin> Mouse I make the program recite text ... but I need an audio file of the sounds.
[23:56] <Daekdroom> mmfb, it's not like windows :S
[23:57] <mmfb> Daekdroom: Yeah. It's pretty complicated, but I'm lovin' it so far.
[23:57] <myrtlebeachbums> Hey folks - did something dumb and looking for help. I installed Flash 10.1 32 bit on my 64 bit system using "sudo dpkg -i --force-architecture install_flash_player_10_linux.deb", and it didn't seem to work. When I go to remove it, it's not showing up in Synaptic, but I see it as "adobe-flashplugin" when I do a dpkg -l. Attempting to do a "sudo apt-get remove --purge adobe-flashplugin" comes up with "Package adobe-flash plugin is not i
[23:58] <rayt> use the 64bit version
[23:58] <Exxon> hi there
[23:58] <Exxon> how to mount usb!
[23:58] <myrtlebeachbums> Would love to, but I'm just trying to get rid of the 32 bit version which is currently installed.
[23:58] <mouse> liam_wullfin, Oh sorry read wrong name.  However if you want to do what I think you want, what I did was connect an audio wire from speakers right back into mic port and used audocity to record.
[23:59] <mmfb> One more question before I to play around on here... I'm using a headset, but for some reason I can't alter the sound by using the sound adjusting thingy on Linux. I have to use the wheel on the cord. How can I change that?
[23:59] <guntbert> Exxon: normally an usb storage device is mounted automatically and you get an icon on your desktop
[23:59] <peque> hi all, I would like to make backups of a whole directory. I've tried Déjà Dup, but it is not what im looking for. Is there a program which just clone the directory the first time (no compression) and then the next time just clone de differences? (I dont need it to keep the different changes in different days, just want the latest version of that directory cloned). Thanks in advance! :)
[23:59] <Exxon> how to mount usb in ubuntu