[02:00] <abarbaccia> hey guys - how's it going?
[02:09] <abarbaccia> anyone use a NAS for storing their recordings? I just picked up a WD My
[02:09] <abarbaccia> WD MyBook World Edition but not sure if i'm sticking with it
[02:11] <abarbaccia> i'm not even getting 10MiB/s writes
[02:12] <bcgrown> has anyone else had issues with mythwelcome receiving LIRC commands intended for mythfrontend?
[02:13] <bcgrown> mine sometimes shuts down when i select things :(
[04:17] <qwebirc82124> I an very new to Linux...i have hauppauge 1600 card and i could get it working with MythBuntu using DVB (with direct Coax) to teh tuner, however now i wish to connect my Comcast STB to the analog tuner, but i am not making headway. I am setting up the capture cardto IVTV. I am not sure what i am doing wrong any suggestions?
[04:19] <patdk-lap> it will just work :)
[04:20] <qwebirc82124> i am trying to keep the faith...but so far faith is not sufficient...:)
[04:23] <qwebirc82124> I think I am screwing up the input connections in this case...
[04:26] <patdk-lap> did you select the pvr-x50 interface for it?
[04:27] <patdk-lap> or maybe it says, pvr-350/pvr-250/pvr150/pvr-500
[04:27] <patdk-lap> that would be the analog side of the card, I use one here
[04:28] <qwebirc82124> are you talking about the physical connection to the card?
[04:29] <qwebirc82124> I have HVR1600 and yes, i am using the analog side from the STB into the card
[04:29] <patdk-lap> ya, you have to configure it as a second card in myth
[04:29] <qwebirc82124> yup i did that
[04:29] <patdk-lap> myth will see two cards, the dvb (digital) and the ivtv/pvr-x50 one
[04:29] <patdk-lap> then you need to setup your interfaces
[04:29] <qwebirc82124> yup it does that
[04:30] <patdk-lap> select what input you want to use
[04:30] <qwebirc82124> hmm...ok...i think I am doing that
[04:30] <patdk-lap> that part you will probably have to play with some
[04:30] <qwebirc82124> oh okie..
[04:30] <patdk-lap> cause the card doesn't always map like, composite1 to the composite jack on the card
[04:31] <patdk-lap> it might be composite3, not sure
[04:31] <patdk-lap> I think that card has 3 of them on it
[04:32] <qwebirc82124> yeah have it to Tuner1
[04:32] <qwebirc82124> which I think I have confirmed from reading other stuff online
[04:34] <patdk-lap> tuner1 would be the coax cable
[04:34] <qwebirc82124> yup taht is the one i am using
[04:34] <patdk-lap> that would be the worst quality you could get, from your stb
[04:35] <qwebirc82124> i understand that, right now I dont have any spare cables around to do either Svid or composite.
[04:35] <qwebirc82124> I think if i can get it to work via coax...i could get it to work with other forms of inputs as well...
[04:36] <patdk-lap> make sure you set it to the correct channel
[04:36] <qwebirc82124> i am using channel 3
[04:36] <patdk-lap> I dunno how to do that, never tried to use a fixed channel like that
[04:37] <qwebirc82124> i think you have hit the nail on the head
[04:37] <qwebirc82124> what happens is that when i try to come out of the back end
[04:37] <qwebirc82124> i get an error taht my starting channel is not set up
[04:37] <qwebirc82124> but i dont have a way to set that starting channel up
[06:28] <miko> Hi is there anybody who could help with cccam plugin?
[06:40] <rhpot1991> !sascng | miko
[06:40] <Zinn> miko: sasc-ng is a method to ILLEGALLY receive cable or satellite broadcasts via a fake software dvb-s/c device.  It is forbidden from being discussed in #ubuntu-mythtv, #ubuntu-mythtv-dev, #mythtv-users, and #mythtv.  If you would like to learn more about it, please refer to its developers and keep any and all discussions about it there.
[06:47] <DrMoMo> I am running mythbuntu and it's connected to my TV.  However, the screen is not positioned correctly on my monitor (its up and to the left so it cuts a lot off, and i can see the desktop on the bottom ride)  what would i need to do in order to go about fixing this
[06:54] <patdk-lap> adjust your modlines in your xorg config
[06:55] <DrMoMo> xorg.conf?
[06:56] <DrMoMo> i don't see a modlines line in /etc/X11/xorg.conf
[07:28] <DrMoMo> ?
[15:24] <DrMoMo> I am running mythbuntu and it's connected to my TV.  However, the screen is not positioned correctly on my monitor (its up and to the left so it cuts a lot off, and i can see the desktop on the bottom ride)  what would i need to do in order to go about fixing this
[15:56] <highvoltage> howdy! there doesn't seem to be any mythbuntu daily builds available?
[15:56] <highvoltage> or am I just looking at the wrong place? :)
[15:57] <superm1> highvoltage, there has been cd build problems
[15:57] <superm1> they should be at http://cdimage.ubuntu.com/mythbuntu
[15:57] <highvoltage> superm1: ok
[15:57] <Zinn> [cdimage.ubuntu.com] Index of /mythbuntu
[15:57] <superm1> outside our control though is the failure
[15:57] <superm1> http://people.canonical.com/~ubuntu-archive/cd-build-logs/mythbuntu/maverick/daily-live-20100811.log
[15:57] <Zinn> [people.canonical.com]
[15:57] <highvoltage> yes I noticed that it was empty :/
[15:57] <superm1> that's something pitti or slangasek or cjwatson needs to fix :(
[15:59] <atrus> mythvideo seems to be looking for a newer protocol version than the backend? "MythTV.exceptions.MythDBError: Mismatched schema version for 'mythvideo.DBSchemaVer': database speaks version 1032, we speak version 1036"
[16:43] <bashtoni> y/quit
[18:27] <MWelchUK> I'm running mythbuntu 10.04 and the frontend crashes every now and again. The log file seems to have some useful information in it - is there anywhere I can post it so that the devs can see it?
[18:28] <tgm4883> !pastebin
[18:28] <Zinn> when pasting more than 5 lines of data please use http://mythbuntu.pastebin.com so you don't flood the channel.  Then please post the link in the channel.
[18:29] <MWelchUK> tgm4883, I was thinking about somewhere a little more permanent...
[18:29] <tgm4883> MWelchUK, file a bug report on launchpad?
[18:29] <tgm4883> !bug%
[18:30] <tgm4883> https://edge.launchpad.net/mythbuntu
[18:30] <Zinn> [edge.launchpad.net] Mythbuntu, Ubuntu derivative focused upon MythTV in Launchpad
[18:30] <MWelchUK> tgm4883, Just realised that would probably be the case as I wrote that :-)
[23:20] <russell5>  has anyone had a prblem with ac3 and using the internal player with the volume being to low?