[00:00] <MorpheusXNL> Robin2: and you are in the live dekstop environment and the drive is not mentioned in your my computer.
[00:00] <ytttg> the wirelss router is a westell 7501. the laptop wireless card is Intel® Centrino® Wireless-N 1000 802.11b/g/n wireless LAN,
[00:01] <Robin2> MorpheusXNL: That's it exactly. I'm on the desktop with the terminal open, because it doesn't appear.
[00:01] <DasEi> tim_: done ?
[00:01] <tim_> DasEi: done. what was wrong with it?
[00:01] <DasEi> tim_: http://pastebin.com/vKEd3fC8
[00:01] <DasEi> tim_: outdated version, wrong key
[00:02] <tim_> DasEi: K
[00:02] <MorpheusXNL> the fact that you do not get any listing of a harddrive or device means that it is so broken that even your computer BIOS doesn't recognize it. Can you check if your machine's does recognize the drive
[00:02] <DasEi> tim_: that's one command in one line
[00:02] <Robin2> How should I go about that?
[00:02] <maquis> mcphail: looks like complete uninstall/reinstall may have worked
[00:02] <maquis> mcphail: thanks a ton!
[00:02] <DasEi> tim_: the paster just divorced it
[00:03] <tim_> DasEi: OK
[00:03] <rebirth> DasEi: i am back, but the device still does not show up in my pulse audio volume control
[00:03] <mcphail> maquis: good stuff!
[00:03] <MorpheusXNL> reboot your machine and most of the time you can press a F button to enter setup and look in there for info about your harddrive. what brand of machine do you have
[00:03] <Robin2> I have a Dell Studio 15.
[00:03] <DasEi> tim_: sudo apt-get update && sudo apt-get upgrade
[00:03] <MorpheusXNL> on dell machine's it is F2
[00:03] <DasEi> tim_: shall throw no more errors now
[00:04] <rebirth> DasEi: are we sure the usb device is showing up? could it be a problem with the usb?
[00:04] <tim_> DasEi: thanks for the help!
[00:04] <annie> Any ideas on how to keep my wifi from dropping?
[00:04] <MorpheusXNL> if you check that and get back and post the outcome we can look at things further.
[00:04] <Robin2> MorpheusXNL: okays, will do. Thank you.
[00:05] <DasEi> rebirth: sudo apt-get install gnome-alsamixer pavucontrol
[00:05] <Robin2> MorpheusXNL: on "Device Info", it states "Primary Hard Drive = 320 GB HDD"
[00:05] <TELL0> which command I have to use, to know information about my video card?
[00:06] <MorpheusXNL> ok so it is there according to the machine.
[00:06] <Dunas> Attempting to install or load the liveDVD of Ubuntu 10.04 x64 results in a black screen about 3/4 the way into the loading sequence, the monitor declaring it has lost signal from the graphics card, and a complete inability to do much else from that point. Graphics card is an ATI HD5770. Any help?
[00:06] <Robin2> phew, so that's something.
[00:06] <sarthor> chemical-death, i give your output in pm
[00:06] <rebirth> DasEi: done
[00:06] <Laptop_fur> my sound isn't working
[00:06] <gimpy253> Update, my system still tries to boot into a GUI even though I REMOVED the x11-common package.  I'm at a loss here.
[00:06] <MorpheusXNL> Robin2: are you in the live environment again
[00:06] <Robin2> No, I can get there. It may take a while though.
[00:07] <chemical-death> sarthor: yeah
[00:07] <Laptop_fur> the sound card has been located but nothing is coming out of the speakers
[00:07] <thune3> annie: sometimes running a continuous ping on the router (or through the router) helps. You might have some luck with compat-wireless (packages are in ubuntu repos): see http://wireless.kernel.org/en/users/Download
[00:07] <DasEi> Tello: sudo hwinfo
[00:07] <DasEi> rebirth:  gnome-alsamixer
[00:07] <iggy_> hey guys following this guide http://ubuntuforums.org/showthread.php?t=1354191&highlight=dwa-130 i managed to get my dlink drivers installed but so far all i get is my dlink device blinking i still cant enable wireless
[00:08] <Edmund> sorry to be a pian but can someone link me to/give me the adress of the ubuntu-offtopic channel?
[00:08] <Edmund> pain*
[00:08] <mcphail> gimpy253: it gets harder and harder to get rid of X as time goes by
[00:08] <DasEi> rebirth : and also under system > preferences > sound, can the usb be selecte now ?
[00:08] <DasEi> d*
[00:08] <jefinc> has anyone here tried to setup the android remote for ubuntu?
[00:08] <thune3> annie: no knowing the root cause, my suggestions could be off/irrelevant
[00:08] <MorpheusXNL> Robin2: well if you want to save files that is atm your only shot
[00:08] <DasEi> !ot | Edmiund, :)
[00:09] <gimpy253> mcphail: Installed X to use wiht X11 forwarding only, but now it tries to start on boot , fails, and I can't boot at all.
[00:09] <Robin2> Yeah, I'm loading it up. :)
[00:09] <annie> thune3: no worries... I'm checking your link know... ty
[00:09] <Laptop_fur> my sound isn't working
[00:09] <Laptop_fur> the sound card has been located but nothing is coming out of the speakers.
[00:09] <rebirth> DasEi: not showing up ALSA mixer or sound prefs
[00:09] <Laptop_fur> I am using ubuntu on a viao
[00:09] <Laptop_fur> any ideas?
[00:09] <mcphail> gimpy253: is this from ubuntu-server with no X initially?
[00:10] <MorpheusXNL> Robin2: so in computer you only see cdrom
[00:10] <DasEi> Laptop_fur: install alsamixergui, make sure it's not muted
[00:10] <Dink> When I try to run a VPN connection via network-manager nothing happens. Do I need to do anything special ?
[00:10] <DasEi> rebirth : hrrm
[00:10] <Laptop_fur> dasei is also already on here?
[00:10] <Laptop_fur> or do I have to download it?
[00:10] <rebirth> DasEi: are we sure it's not a problem with the usb?
[00:10] <MorpheusXNL> Robin2: brb 2mins
[00:10] <Robin2> MorpheusXNL: I'll let you know when it comes up, there's only one thing there though. I don't remembr the name. Sure.
[00:11] <gimpy253> mcphail: Yup, Ubuntu-server
[00:11] <DasEi> rebirth: you said it worked before, and syslog as hwinfo found an unknown device, can re-check :  lsusb
[00:11] <BluesKaj> Laptop_fur,  in the terminal type ' alsamixer ', make sure the Master, PCM, Line & CD are all unmuted ,by using the "M" key'  then turn those controls up to the max
[00:11] <shsek> hmm, what did it do to my kernel:
[00:11] <shsek> Processing triggers for initramfs-tools ...
[00:11] <shsek> update-initramfs: Generating /boot/initrd.img-2.6.31-22-server
[00:11] <DasEi> Laptop_fur: sudo apt-get install alsamixergui
[00:12] <DasEi> Laptop_fur: alsamixergui
[00:12] <shsek> why did it change my kernel? is that needed for cryptsetup?
[00:12] <mcphail> gimpy253: "ls -l /etc/init/?dm"
[00:12] <DasEi> Laptop_fur: the icons abbove pcm and master have to be green (showing speaker-symbols)
[00:12] <DasEi> clickable--
[00:12] <Laptop_fur> they are green
[00:13] <Laptop_fur> the bars are filled
[00:13] <DasEi> shsek: the kernel itself gets updated from time to time, that's normal
[00:13] <Laptop_fur> green then whit and red
[00:14] <rebirth> DasEi: lsusb - list USB devices?
[00:14] <annie> thune3: how would I set up the 'ping' thing you stated? I know how to ping, but not how to set one up to keep the conenction active (if that's the problem/solution)
[00:14] <shsek> DasEi, wouldn't it cause issues when a new version of it is out?
[00:14] <DasEi> Laptop_fur: it's above the bars , the two little speakers, you can click them
[00:14] <shsek> DasEi, I've just never installed something that did it, seems kinda odd
[00:14] <Laptop_fur> They aren't showing
[00:14] <DasEi> shsek: no, they are patched or just  advanced, won't harm with installed software
[00:15] <HoNgOuRu> hello
[00:15] <DasEi> shsek: sudo apt-get update && sudo apt-get upgrade to get latest score
[00:15] <HoNgOuRu> I'm having problems making my lan usb adapter
[00:15] <HoNgOuRu> model wusb54gc v3
[00:15] <shsek> DasEi, hmm, I suspect what I just installed that did it isn't really needed at all
[00:16] <shsek> should removing it restore the changes?
[00:16] <HoNgOuRu> on ubuntu 10.04 amd64
[00:16] <DasEi> rebirth: yes, lists usb devices
[00:16] <HoNgOuRu> yes
[00:16] <Laptop_fur> No speaker symbols are showing for me.
[00:16] <shsek> s/restore/revert
[00:16] <HoNgOuRu> its detected under lsusb
[00:16] <gimpy253> mcphail: The command "ls -l /etc/init/?dm" says that does not exist.
[00:17] <HoNgOuRu> did anyone had problems with WUSB54GC v3 ?
[00:17] <rebirth> DasEi: as soon as i type that in it displays a list of options
[00:17] <shsek> I followed a tutorial for making an encrypted filesystem and it told me to install initramfs-tools, which I think is only needed if I were trying to make the the root (/) to get mounted from an encrypted partition, which I'm not trying to
[00:18] <Laptop_fur> Dasei, the speakers are note showing above the bars.
[00:18] <mcphail> gimpy253: don't know what is bringing up X then... You're going to have to plung into /etc/rcwhatever directories and explore
[00:18] <rebirth> DasEi: oh i see, ok i got a list
[00:18] <MorpheusXNL> Robin2: any news
[00:19] <rebirth> DasEi: i'm going to compare when i unplug it and see what's missing
[00:19] <DasEi> Laptop_fur: http://yfrog.com/i3bildschirmfototp,  no such green icons there ?
[00:19] <Robin2> MorpheusXNL: a couple more minutes
[00:19] <DasEi> rebirth : for that,         dmesg | tail              is also a good tool
[00:20] <rebirth> DasEi: how do i use it?
[00:20] <DasEi> rebirth: type it just when re-plugged the usb :  dmesg | tail
[00:20] <Laptop_fur> nope
[00:20] <Robin2> MorpheusXNL: "File System" is the only thing there
[00:21] <DasEi> Laptop_fur: so card isn't properly found/set
[00:21] <MorpheusXNL> ok and if you open up a terminal and type sudo fdisk -l
[00:21] <rebirth> DasEi: when i compare the list a device called "Midiman" shows up when the device is plugged in
[00:22] <MorpheusXNL> you should get a list if not it doesn't have your harddrive
[00:22] <Laptop_fur> I used the sysinfo thing to find the card
[00:22] <Robin2> nothing happens.
[00:22] <Laptop_fur> How do I set the sound card?
[00:22] <hiexpo> DasEi,  - let me tell you whats happened here there were a few of us that all we do is wifi like myself and pure_hate that come in here and help and get insulted by other members or co.s so we quit helping
[00:22] <MorpheusXNL> i am not sure if you need to put sudo in the live environment type fdisk -l
[00:23] <MorpheusXNL> and what is the outcome of df -lh
[00:23] <DasEi> hiexpo: nick-miss ?
[00:23] <Robin2> that goes through File System
[00:23] <Robin2> shows size, used, avail, use%, mounted on
[00:23] <MorpheusXNL> Robin2:  all via commandline
[00:23] <DasEi> hiexpo: else let's talk in ot in few minutes
[00:24] <Robin2> Yeah, it just says it all under where I typed what you said.
[00:24] <hiexpo> DasEi,  ok
[00:24] <DasEi> Laptop_fur: sometimes recompiling alsa can fix it, especially on laptops, but can take ~ 15 minutes
[00:24] <MorpheusXNL> ok do you see hd* and star would be the letter a or b
[00:25] <DasEi> Laptop_fur: sudo apt-get install modul-assistant
[00:25] <Laptop_fur> ugh I just installed this
[00:25] <hiexpo> DasEi,  you in ot
[00:25] <DasEi> hiexpo: yup
[00:25] <hiexpo> DasEi,  ubuntu-ot
[00:26] <Robin2> no, only aufs, none, /dev/sr0, /dev/loop0/ none, tmpfs, none, none, none
[00:26] <MorpheusXNL> Robin2: hmmm
[00:26] <Laptop_fur> Reading state information... Done
[00:26] <Laptop_fur> E: Couldn't find package modul-assistant
[00:26] <DasEi> hiexpo: #ubuntu-offtopic
[00:26] <TiK> hi
[00:26] <Robin2>  /dev/loop0 *
[00:26] <Robin2> so it's there and not there at the same time.
[00:27] <MorpheusXNL> and fdisk -l gave nothing then i am afraid that it is broken.
[00:27] <MorpheusXNL> -l is L
[00:27] <Robin2> yeah
[00:27] <iggy_> can u guys help me out i cant get my dlink dwa-130 to give me wireless
[00:27] <Robin2> Okays, so there's no way back?
[00:27] <Dunas> Attempting to install or load the liveDVD of Ubuntu 10.04 x64 results in a black screen about 3/4 the way into the loading sequence, the monitor declaring it has lost signal from the graphics card, and a complete inability to do much else from that point. Graphics card is an ATI HD5770. Any help?
[00:27] <MorpheusXNL> Robin2:wait type sudo su
[00:27] <Robin2> done
[00:27] <DasEi> Laptop_fur: module-assistant prepare
[00:27] <MorpheusXNL> and then fdisk -l
[00:28] <MorpheusXNL> does it give you anything
[00:28] <Robin2> nope
[00:28] <DasEi> Laptop_fur: aptitude -t experimental install alsa-source
[00:28] <DasEi> Laptop_fur: say if errors thrown
[00:28] <chemical-death> iggy_: try this http://www.linuxquestions.org/questions/linux-hardware-18/wireless-usb-device-dwa-130-on-ubuntu-583189/
[00:28] <Maser> Whats your honest OP on ubuntu server?
[00:29] <Laptop_fur> ok
[00:29] <Laptop_fur> it is installing
[00:29] <Laptop_fur> ok now what do I do?
[00:29] <MorpheusXNL> then it is not there and the system doesn't recognize it. it means 1. it is broken or 2.ubuntu can't handle the disk. but in my office i have a lot of dell machines running ubuntu. so i think you should bring your drive to a recovery company and maybe they can get your data
[00:30] <rebirth> DasEi: so it looks like the usb device is being seen in some regard, do you have any other ideas or is this a deadend?
[00:30] <Robin2> Yeah, if that's the only option, perhaps it's best to go without, and start again.
[00:30] <iggy_> ive got the driver installed with ndiswrapper but the dlink adapter is just blinking and i caant enable wireless
[00:30] <MorpheusXNL> http://www.pendrivelinux.com/mounting-a-windows-xp-ntfs-partition-in-linux/
[00:30] <mek||malloc> Howdy folks, anyone know where the gnome startup script is located; the ~/.fluxbox /startup equivalent...
[00:30] <iggy_> or cpnnect my browser without ethernet
[00:30] <MorpheusXNL> Robin2: read the link than you will see what i mean by the fdisk command
[00:31] <DasEi> rebirth: for sure no deadend, as you said it worked before, maybe you should also try to recompile alsa, as I just tell Laptop_fu*
[00:31] <nesto1000> Can someone help me set up 5.1 sound with my desktop running 10.04?
[00:31] <Robin2> yeah, I understand.
[00:31] <MorpheusXNL> Robin2: sorry
[00:31] <mek||malloc> nesto1000: https://help.ubuntu.com/community/SoundTroubleshooting Have you seen that? I've found it helpful in the past.
[00:31] <nesto1000> I'll check it out mek||malloc
[00:32] <MorpheusXNL> well all i am off too bed. Robin2 good luck with your drive. bey all
[00:32] <chemical-death> iggy_: what version of ubuntu?
[00:32] <Robin2> thanks. :)
[00:32] <iggy_> 10.04
[00:32] <opij> does anyone know where PC/OS is supported?
[00:32] <MorpheusXNL> Robin2: your welcome
[00:32] <Laptop_fur> dasei what do I do after the module assistant installed?
[00:32] <nesto1000> Btw mek||malloc it's integrated sound... so yea...
[00:33] <iggy_> chemical-death 10.04
[00:33] <DasEi> Laptop_fur: sudo aptitude -t experimental install alsa-source
[00:33] <mek||malloc> nesto1000: Might still be a problem with your alsamixer.
[00:33] <DasEi> Laptop_fur:sudo  module-assistant prepare  , first ..
[00:33] <Guest29490> hi
[00:33] <Thund3rX> Hi all, did someone experiment with the Eucalyptus Virtualisation Solution?
[00:33] <rebirth> DasEi: sorry, do i need to install a package to do so?
[00:33] <DasEi> Laptop_fur: sudo aptitude -t experimental install alsa-source ,  second
[00:34] <mek||malloc> Is the gnome startup script located somewhere in ~/.gconf, ~/.gconfd, ~/.gnome2?
[00:34] <hiku> Thund3rX: some of my R&D guys here at my company have. what's up
[00:34] <DasEi> rebirth : sudo apt-get install module-assistant
[00:34] <Dunas> Attempting to install or load the liveDVD of Ubuntu 10.04 x64 results in a black screen about 3/4 the way into the loading sequence, the monitor declaring it has lost signal from the graphics card, and a complete inability to do much else from that point. Graphics card is an ATI HD5770. Any help?
[00:34] <Robin2> A quick question to anyone else that can help. Ubuntu can't find my HDD, the BIOS knows that it's there though. Anyone have ideas on how to get the data?
[00:34] <nesto1000> Hmmm... mek||malloc that site didn't help me
[00:34] <Thund3rX> I was just wondering if it orchestrates well VMWare Nodes as well as the Xen VMs it supports out of the box
[00:35] <fuentesjr> anyone know how i can test to see if a repo key has been imported?
[00:35] <chemical-death> iggy_: did you choose the right version of the driver? x64 or x86...the correct revision?
[00:35] <iggy_> i used xp from the disk
[00:35] <nesto1000> I get the sound to work, but not the 5.1 analog sound tho....
[00:35] <iggy_> i checked if config
[00:35] <iggy_> and seen 72 errors
[00:35] <hiku> Thund3rX: it doesn't support Xen out of the box, only kvm. That is one major issue the dev guys here are working on.
[00:35] <nesto1000> I only get 2.0 sound i guess mek||malloc
[00:35] <iggy_> rx tx packets
[00:35] <chemical-death> fuentesjr: if you use "aptitude update" in terminal without errors it will work
[00:36] <Thund3rX> Sorry hike, you are right
[00:36] <mek||malloc> nesto1000: After a bit of reading, might I suggest http://ubuntulinuxhelp.com/the-simple-way-to-get-51-surround-sound-audio-working-in-ubuntu/
[00:36] <Guest29490> haw can i set up remote control to ask for user name and password
[00:36] <iggy_> it was under local loopback
[00:36] <Laptop_fur> ok
[00:36] <Laptop_fur> done
[00:36] <Laptop_fur> now what?
[00:37] <fuentesjr> chemical-death: i'm trying to write a bash script that tests to see if the key has been imported
[00:37] <map7> Guest29490, use something like freenx
[00:37] <Thund3rX> How about proprietary VMWare technology, some people say that it works but I was wondering how Canonical will present this to the users
[00:37] <iggy_> iwconfig gave no errors but says i have no access point assosiated
[00:37] <hiku> Thund3rX: hmm, yea good question.
[00:37] <chemical-death> fuentesjr: sorry i didn't get it.
[00:37] <FloridaGuy> i have a dwa-125 wireless usb has the rt2870 chipset....cant find that drive in ubuntu repo
[00:38] <fuentesjr> apt-key export 'Foo String' returns gpg: WARNING: nothing exported but the return code is still 0 as oppose to non-zero
[00:38] <sarthor> Hi again, this is my fingerprint device 60Y4134, how to get driver for this device
[00:38] <rebirth> DasEi: should i run sudo module-assistant prepare?
[00:38] <agoole> hi, my lenovo laptop just dies on bootup, including recovery mode, any help ?
[00:38] <Laptop_fur> alsomixer has been installed ...again
[00:38] <Laptop_fur> What do I do now?
[00:39] <BluesKaj> fuentesjr, sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys xxxxxxx , should work
[00:39] <DasEi> rebirth: yes
[00:39] <Thund3rX> Since we want the developers to provision to them self VMs for testing purposes while leveraging the existing VMWare Shared Infrastructure. Off course introducing KVM GTechnology would do the trick but once again, it will be difficult to get the required approvals for that.
[00:39] <nesto1000> mek||malloc, I'm not much of an expert with ubuntu.... so i dont get what to do... also that article featured a sound card while i have integrated sound
[00:39] <mek||malloc> nesto1000: Have you attempted to mess with your alsamixer at all
[00:39] <AndroUser> what happens if two pc's have the same mac address?
[00:40] <chemical-death> iggy_: does it see any networks but your can't connect or does it work not a bit
[00:40] <mek||malloc> nesto1000: There should be a channel for controlling the surround feature, if that helps.
[00:40] <opij> does anyone know where PC/OS is supported?
[00:40] <hiku> Thund3rX: thats exactly whats happening at my company. =)
[00:40]  * Laptop_fur wonders if somebody can teamview him
[00:41] <nesto1000> whats alsamixer? if thats the thing on top of the tool bar... then yes i have mek||malloc
[00:41] <mek||malloc> FloridaGuy: http://forums.dlink.com/index.php?topic=2228.0 shows someone getting DWA-130 working using Ndiswrapper.
[00:41] <mek||malloc> Last post.
[00:41] <agoole> any way to get a ttyl if alt+ctrl + f1-9 doesn't work ?
[00:41] <nesto1000> And it does have a feature for surround sound but its for the spdif output mek||malloc
[00:41] <FloridaGuy> mek||malloc, ok thanks
[00:41] <aeon-ltd> agoole: you can kill X
[00:41] <DasEi> Laptop_fur: sudo aptitude -t experimental install alsa-source      ,  did that ran through ?
[00:41] <marcelo> hola
[00:41] <rebirth> DasEi: done
[00:41] <randomseed> opij, PCLinuxOS?
[00:41] <Guest29490> haw can i set up remote control to ask for user name and password
[00:42] <Laptop_fur> yeah
[00:42] <Laptop_fur> it did
[00:42] <agoole> aeon-ltd: how ?
[00:42] <chemical-death> agoole: dell notebook or keys out of order?
[00:42] <opij> no randomseed
[00:42] <marcelo> español es aca=?
[00:42] <Thund3rX> You cannot just push Open Source at large at once: we want to leverage the self serving virtualization facility at first and once they realize the ROI, we give them more
[00:42] <DasEi> rebirth: sudo aptitude -t experimental install alsa-source
[00:42] <aeon-ltd> agoole: sudo killall X (or xorg if it doesn't work)
[00:42] <agoole> chemical-death: thinkpad, with all the right keys....blank screen and nothing boots
[00:42] <mek||malloc> agoole: http://tldp.org/HOWTO/Keyboard-and-Console-HOWTO-7.html
[00:42] <agoole> aeon-ltd: I don't have termnial
[00:42] <DasEi> Laptop_fur: ,  rebirth : sudo module-assistant build alsa
[00:42] <aeon-ltd> agoole: what are you in then?
[00:43] <chemical-death> agoole: ok aeon-ltd supports you
[00:43] <marcelo> alguien habla español?
[00:43] <mek||malloc> agoole: If something is messed up with your system and your kernel won't even give you a CLI, I suggest using a live disk (ubuntu if your comfortable with it) but I suggest gentoo rescue
[00:43] <mek||malloc> Something's wrong with your init() if that's the case.
[00:43] <marcelo> spanish¿
[00:43] <mek||malloc> Otherwise, I'd look through the instructions in that link I sent
[00:44] <agoole> aeon-ltd: nothing, I can't even boot the recovery, I tried switching ttyl, to see if I was getting a blank screen, but I guess i'm getting no screen
[00:44] <agoole> mek||malloc: ok, thanks
[00:44] <Guest29490> haw can i set up remote control to ask for user name and password
[00:44] <mek||malloc> agoole: Boot using a live disk and mount your problematic drive.
[00:44] <rebirth> DasEi: the first command is throwing errors at me: "** (gnome-alsamixer:2000): WARNING **: gam_toggle_get_state (). No idea what to do for mixer element "Input Source"!"
[00:44] <agoole> ok, one moment, gotta find the x64 cd
[00:44] <BluesKaj> !patience | Guest29490
[00:45] <Guest29490> haw can i set up remote control to ask for user name and password
[00:45] <mek||malloc> Guest29490: What do you mean by a remote? A physical remote?
[00:45] <Guest29490> yes
[00:45] <nesto1000> mek||malloc, i tried alsamixer but idk how to work it
[00:46] <saby> is there a channel for angry people on freenode :p
[00:46] <Laptop_fur> lol
[00:46] <BluesKaj> nesto1000, use the arrow keys
[00:46] <yoyoned> saby: ##windows
[00:46] <mek||malloc> nesto1000:  http://alsa.opensrc.org/Alsamixer has really good documentation
[00:46] <saby> LOL yoyoned
[00:46] <Guest29490> can i do that?
[00:46] <thune3> agoole: did you make any system changes  before the boot problem occured?
[00:46] <marcelo> alguien habla en español?
[00:46] <marcelo> ayuda con amesene
[00:47] <saby> that would be an appropriate channel yoyoned
[00:47] <marcelo> emesene
[00:47] <mek||malloc> nesto1000: I'd try to find people having the same problem on google and see what alsa related packages are missing or deprecated.
[00:47] <DasEi> rebirth: http://pastebin.com/GaUr4Rij
[00:47] <opij> does anyone know where PC/OS is supported?
[00:47] <agoole> thune3: dad did regular updates, and it never rebooted. but can't recall exactly what was updated or when
[00:47] <Oer> !es | marcelo
[00:48] <rebirth> DasEi: i've done them all except the last one so far
[00:48] <marcelo> alguien que hable español
[00:48] <KE1HA> .
[00:48] <DasEi> rebirth: and got errors  on the third ?
[00:48] <nesto1000> mek||malloc, i think that the problem is that ubuntu is detecting the suround analog inputs as mic in and line... cuz when i was on windows that was what was wrong
[00:48] <DasEi> !es | marcelo
[00:49] <sarthor> how to check what fingerprint device is in my SL510 lenovo
[00:49] <rebirth> DasEi: redoing them, no errors so far
[00:49] <DasEi> rebirth: so rebuild, and beg for the right module :-D
[00:50] <mek||malloc> nesto1000: I wish I could offer greater help. Not really sure how to proceed without being in front of the machine. Google and wiki for a bit.
[00:50] <rebirth> DasEi: building and praying
[00:50] <Thund3rX> hiku it seems that Eucalyptus supports Xen and KVM out of the box: perhaps new in version 2.0. VMWare is also only supported in the Enterprise Version $$$
[00:50] <nesto1000> blah...
[00:50] <chemical-death> opij: try /j #mac
[00:50] <nesto1000> guess that ill go back to windows for my videos
[00:50] <mek||malloc> Can someone kindly tell me where the gnome startup script is located? I'm assuming ~/.gnome2 or ~/.gconf[d]
[00:51] <Laptop_fur> ok dasei done
[00:51] <DasEi> Laptop_fur: sudo reboot
[00:51] <Laptop_fur> ok
[00:51] <mek||malloc> Bah, nesto1000 should have just read https://help.ubuntu.com/community/SurroundSound
[00:51] <mek||malloc> :o(
[00:51] <opij> IM TRYING TO FIND WHERE PC/OS IS SUPPORTED
[00:51] <mek||malloc> opij: Pardon?
[00:52]  * BluesKaj wonders if anyone advised nesto1000 about medibuntu repos and libdvdcss2 etc
[00:52] <agoole> mek||malloc: ok, loaded live cd.
[00:52] <agoole> mek||malloc: looking to mount the drive.
[00:52] <agoole> mek||malloc: any ideas on how I can fix this boot ?
[00:53] <BluesKaj> opij, pc-linux ? try #pc-linux
[00:53] <bichonfrise74> I have a dual boot (windows and ubuntu 10.04), is it possible to increase my disk space / partition to ubuntu?
[00:53] <agoole> bichonfrise74: I can't remember how, but the answer is yes, but its also dangerous
[00:54] <agoole> bichonfrise74: you could lose all sorts of windows things
[00:54] <BluesKaj> oops , opij ...it doesn't exist :)
[00:54] <bichonfrise74> oh.
[00:54] <bichonfrise74> agoole - so the better method I guess would be to uninstall ubuntu, and install it again with bigger size?
[00:54] <rebirth> DasEi: build complete
[00:54] <DasEi> rebirth: sudo reboot
[00:54] <rebirth> ok brb
[00:54] <agoole> bichonfrise74: did you already resize the windows partition ?
[00:54] <hiku> Thund3rX: ah nice.
[00:54] <opij> according to this page http://www.pc-os.org/ users can still get their fixes from canonical
[00:54] <laptop_fur> it didnt work
[00:55] <bichonfrise74> agoole - I have not done anything yet.
[00:55] <aSt3raL> nvm i just had a bad download of the iso
[00:55] <agoole> bichonfrise74: so windows and ubuntu are on the same drive ? correect ?
[00:55] <Oer> opzij, please don't troll, pc-os has nothing to do
[00:55] <laptop_fur> Does the sound bar beep when you set it?
[00:55] <bichonfrise74> agoole - that is correct.
[00:55] <agoole> bichonfrise74: have you installed ubuntu already?
[00:55] <bichonfrise74> agoole - yes,
[00:56] <opij> Oer, with what knowledge do you say that?
[00:56] <bichonfrise74> agoole - windows and ubuntu are running side by side.
[00:56] <mek||malloc> agoole: If you are still trying to mount the drive: fdisk -l should list available devices.
[00:56] <agoole> mek||malloc: ok, done and mounted, but i'm blind on how to fix the boot issue...any clue ?
[00:56] <mek||malloc> agoole: http://tldp.org/HOWTO/Keyboard-and-Console-HOWTO-7.html Did you take a look at that?
[00:56] <Oer> did you try #pc-linux like BluesKaj answered ?
[00:56] <agoole> bichonfrise74: then the harm is done already, does windows partition have tons of spare space ?
[00:57] <laptop_fur> dasei, it didnt work
[00:57] <agoole> mek||malloc: yup, didn't help
[00:57] <bichonfrise74> agoole - yup, tons of space.
[00:57] <rebirth> DasEi: still not showing up in pulse
[00:57] <BluesKaj> Oer, it doesn't exist on freenode
[00:57] <DasEi> laptop_fur: alsamixergui still not showing correctly ?
[00:57] <laptop_fur> nope
[00:57] <mek||malloc> agoole: Gotcha. So what symptoms exactly are you encountering. Does the machine boot from the HDD?
[00:57] <laptop_fur> no speakers
[00:57] <agoole> bichonfrise74: then I would just clean the drive, defrag and whatnot, and resize it,
[00:57] <bichonfrise74> agoole - Initially I just wanted to test ubuntu... but now I am loving it very much that I want to use it more.
[00:57] <agoole> bichonfrise74: though its dangerous, keep in mind
[00:58] <opij> Oer, 1) #pc-linux, doesn't exist, 2) PC/OS and PClinuxOS are two separate things 3) your comments are not helpful
[00:58] <agoole> bichonfrise74: if you just need space, I would suggest simply mounting the other partition.
[00:58] <bichonfrise74> agoole - thanks
[00:58] <bichonfrise74> agoole - what do you mean mounting the other partition?
[00:58] <agoole> mek||malloc: boots, but then screen goes black
[00:58] <bichonfrise74> agoole - maybe that is just want I need?
[00:58] <agoole> mek||malloc: even in recovery.
[00:58] <agoole> bichonfrise74: yup, you just want access to the windows-side of the spare hd space, so don't resize ubuntu and windows
[00:59] <z2or0_> hey all just installed a 802.11g wlan card how do I find drivers for it? I have tried a dmesg and it just seems like gibberish to me.
[00:59] <agoole> bichonfrise74: http://www.psychocats.net/ubuntu/mountwindows
[00:59] <laptop_fur> hold on
[00:59] <agoole> bichonfrise74: that should start you off
[00:59] <mek||malloc> agoole: It could be a number of things.... Is there any opportunity for you to Ctrl Alt 1 after core modules are loaded but before the screen goes black?
[00:59] <BluesKaj> z2or0_, which card?
[00:59] <bichonfrise74> agoole - thanks.
[00:59] <agoole> mek||malloc: hum....the last thing it says is loading selection 1 of 1, and then black.
[01:00] <agoole> mek||malloc: let me try that right now.
[01:00] <laptop_fur> ok I just installed the alsamixergui
[01:00] <opij> according to this page http://www.pc-os.org/ users can still get their fixes from canonical. is this true?
[01:00] <laptop_fur> I dont think it was installed before
[01:00] <laptop_fur> now what do I do?
[01:00]  * laptop_fur feels like a noob again
[01:00] <agoole> mek||malloc: because I can see all the modules load, and then its almost like the screen shuts off
[01:00] <z2or0_> BluesKaj: Airlink 802.11g pci
[01:01] <mek||malloc> Right, you should be able to press Ctrl Alt 1 at that time.
[01:01] <DasEi> laptop_fur: errm, you said it didn't show the icons, how did you know if it wasn't installed ?
[01:01] <DasEi> http://yfrog.com/i3bildschirmfototp
[01:01] <DasEi> laptop_fur: ^   make sure speaker icons show green
[01:01] <laptop_fur> I tried typing alsamixergui
[01:02] <laptop_fur> still no speakers
[01:02] <mek||malloc> laptop_fur: What sound card? Or is it integrated.
[01:02] <rebirth> DasEi: i just realize i'm not even getting sound through my laptop speakers
[01:02] <laptop_fur> let me check
[01:02] <z2or0_> BluesKaj: I tried grepping for eth ath 802 and wlan
[01:03] <DasEi> rebirth: alsamixergui, channels unmuted
[01:03] <DasEi> ?
[01:03] <shsek> I installed initramfs-tools, it made some kernel changes (http://pastie.org/1087245.txt?key=tcpk0140qpqvpqmagohww). Than I realized I don't actually need it, and removed it, which displayed some errors (that I don't have). Now, after a restart, I'm getting "Error 15: file not found. Press any key to continue...". When I do press a key I get the boot menu, and every option causes the same error (other than memtest of course). What should I
[01:03] <BluesKaj> z2or0_, lspci
[01:04] <subspider> !rhythmbox
[01:04] <rebirth> DasEi: i need to install alsamixergui
[01:04] <DasEi> go ahead
[01:04] <mek||malloc> Does anyone know where the gnome startup script is? I'm currently looking in ~/.gconf/desktop/gnome/application/window_manager
[01:04] <z2or0_> BluesKaj: Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
[01:04] <subspider> where do i place my pulgins in ruthmbox
[01:04] <subspider> ???
[01:04] <laptop_fur> intel corporation N10/ICH 7 family High Definition Audio Controller (rev 02)
[01:04] <mek||malloc> I also looked in ~/gnome2 and ~/gconfd
[01:04] <laptop_fur> I think that is it
[01:05] <subspider> rhythmbox
[01:05] <DasEi> y
[01:05] <chemical-death> shsek: grub doesn't start anymore?
[01:05] <laptop_fur> Does that help?
[01:05] <shsek> chemical-death, I do get the grub screen with the boot options, but it can't boot anything
[01:05] <snadge> i just bought a new acer aspire one, it comes with windows 7 starter edition and android.. can i replace windows 7 starter edition with ubuntu, but keep the android install?
[01:05] <mek||malloc> subspider: Edit -> Plugins ?
[01:06] <thune3> shsek: i'm on karmic but removing initramfs-tools also removes most of my sytem including the kernel
[01:06] <shsek> chemical-death, and I get the errors before GRUB is displayed, too, when it tries to load the default one
[01:06] <shsek> s/errors/erro
[01:06] <subspider> mek||malloc, theres no palce to install
[01:06] <shsek> * error
[01:06] <shsek> thune3, from what I understood from the errors I got while removing it, it didn't do it very well
[01:06] <rebirth> DasEi: ok i launched it, how can i tell if it's muted?
[01:06] <subspider> mek||malloc, is 3º party pulgin
[01:06] <mek||malloc> subspider: http://live.gnome.org/RhythmboxPlugins/ThirdParty
[01:07] <DasEi> rebirth: check the clickable speaker icons are green
[01:07] <laptop_fur> Dasei did you get my sound card?
[01:07] <DasEi> laptop_fur: yes, was this info from alsamixer ?
[01:07] <laptop_fur> no
[01:07] <rebirth> DasEi: they are very faint green it looks, and the icon shows sound beams
[01:07] <laptop_fur> I used the sysinfo
[01:08] <Jordan_U> shsek: What version of Ubuntu and is it an upgrade or a fresh install?
[01:08] <cheasee> hi, anybody has experiences with http://blog.wpkg.org/2009/04/23/cipher-benchmark-for-dm-crypt-luks/ ... http://marc.info/?l=linux-kernel&m=127532188803414&w=4 ? please pm me!
[01:08] <rebirth> DasEi: when i click them they turn grey with no sound beams, so looks like it's not muted
[01:08] <laptop_fur> The sound card is HDA intel
[01:08] <laptop_fur> that was from the alsamixer
[01:08] <shsek> Jordan_U, 9.10 which I upgraded quite some time ago, had a bunch of reboots since without issues
[01:09] <rebirth> DasEi: at the top it says "card: pulseaudio"
[01:09] <Jordan_U> shsek: Is there a reason you are using grub legacy instead of grub2?
[01:09] <shsek> Jordan_U, not that I know of, I don't even know which one I use
[01:09] <thune3> shsek: initramfs-tools is part of ubuntu-minimal, it is a required core package. I'm not sure how you thought it wasn't installed initally or wasn't needed.  http://packages.ubuntu.com/lucid/ubuntu-minimal
[01:09] <shsek> I didn't change it myself or something, if it defaults to grub2 I probably have grub2
[01:09] <DasEi> rebirth: lsmod | pastebinit
[01:10] <mek||malloc> Should I be asking the gnome folks where the gnome init script is located on Ubuntu?
[01:10] <Jordan_U> shsek: The error message you are getting is from grub legacy.
[01:10] <DasEi> shsek: grub-version tells you
[01:10]  * laptop_fur is beginning to think this is a hardware failure
[01:10] <subspider> mek||malloc, int says Untar this file in ~/.gnome2/rhythmbox/plugins but i don't have that folder
[01:10] <shsek> DasEi, how do I check from grub's command line?
[01:11] <mek||malloc> subspider: Are you sure?
[01:11] <laptop_fur> like the speakers are broken or something
[01:11] <mek||malloc> subspider: . signifies a hidden directory
[01:11] <laptop_fur> let me grab headphones
[01:11] <Jordan_U> DasEi: grub-install --version
[01:11] <rebirth> http://pastebin.com/aaT62dXh
[01:11] <shsek> thune3, hmm, a tutorial on ubuntu.com said to install it, combined with two other things. it seemed to me as if it installed it too
[01:11] <subspider> mek||malloc, i know
[01:11] <rebirth> DasEi: http://pastebin.com/aaT62dXh
[01:11] <BluesKaj> z2or0_, http://acx100.sourceforge.net/
[01:11] <mek||malloc> Try opening the command line and typing: cd ~/.gnome2/rhythmbox -- does that bring you to the correct directory?
[01:11] <DasEi> shsek: Jordan_U: DasEi: grub-install --version
[01:11] <subspider> i created it but stell no detection from rythmbox
[01:12] <shsek> thune3, but now that I look at it (http://pastie.org/1087245.txt?key=tcpk0140qpqvpqmagohww), it didn't. you're correct. what should I do in order to fix it?
[01:12] <shsek> DasEi, I don't have bash or anything, just the command line you get from pressing 'c' at the grub menu
[01:12] <rebirth> DasEi: oh, the device wasn't plugged in when i did lsmod, but it seems like i have bigger problems then the card not working
[01:12] <mek||malloc> subspider: All you should have to do is make the directory
[01:12] <cdcdcdc> hi, getting an error using apt-get "E: Unmet dependencies" - i've tried clean all,apt-get -f but nothing changes
[01:12] <mek||malloc> subspider: http://www.omgubuntu.co.uk/2009/08/rhythmbox-plugins.html
[01:12] <DasEi> rebirth: least midi-modules are loaded / loadable
[01:12] <sebell> hi all
[01:13] <shsek> nothing will boot, not even recovery mode or old kernel (current is 2.6.31-22-server, old is 2.6.28-18-server)
[01:13] <Dunas> Attempting to install or load the liveDVD of Ubuntu 10.04 x64 results in a black screen about 3/4 the way into the loading sequence, the monitor declaring it has lost signal from the graphics card, and a complete inability to do much else from that point. Graphics card is an ATI HD5770. Any help?
[01:13] <tktiddle> Hi Im running ubuntu 9.x netbook remix, I just installed some programmes, including changing the java version and now the system Isn't booting, I'm getting an error 'there is a problem with the configuration server. (/usr/lib/libconf2-4/gconf-sanity-check-2 exited with status 256)  can anyone help me fix it?
[01:13] <chemical-death> shsek: try to reinstall grub with livecd
[01:13] <mek||malloc> Can I use /usr/bin/gnome-wm to specify programs to load on gnome init?
[01:13] <shsek> Jordan_U, I don't know why its grub legacy than
[01:14] <thune3> shsek: when I simulate a removal of initramfs-tools this is what would be removed: http://pastebin.com/1DmyAcgm . It is basically the whole core of the system. I don't know how to recover from that one in any way that would be easier than a reinstall. You severely damaged your ubuntu installation.
[01:14] <Dunas> I would just grab 10.04.1, but it was delayed, so
[01:14] <shsek> thune3, I'm sure it didn't remove that many packages
[01:14] <shsek> it was quite a short list
[01:14] <shsek> would've turn on a red light if I saw that...
[01:16] <Niglop> is anybody in here really good with conky? (i have been in #conky for 24 hours and nobody has talked except me :p)
[01:16] <chemical-death> shsek: try what i told you if it doesn't work i guess you need to reinstall your system like thune3 said
[01:16] <shsek> chemical-death, how do I install grub from a live-cd to ubuntu on my hard drive?
[01:16] <Jordan_U> shek: http://grub.enbug.org/Grub2LiveCdInstallGuide
[01:17] <chemical-death> shsek: try this http://ubuntuforums.org/showthread.php?t=224351
[01:17] <DrinkingDrunkLov> I have a question
[01:17] <hiku> !ask | DrinkingDrunkLov
[01:17] <shsek> is it just grub-related? according to what thune3 says its more severe
[01:17] <hiexpo> !ask | DrinkingDrunkLov
[01:17] <rebirth> DasEi: when i run update manager it is giving errors
[01:18] <sebell> running 10.04 and my dvd r/w drive is non responsive.  the drive shows up in the file system, but inserted disks do not show up.  noted the problem when I tried to burn a disk using brasero and got told there was no disk inserted.
[01:18] <DasEi> rebirth: sudo apt-get update  error output ?
[01:18] <DrinkingDrunkLov> Nevermind sorry I need to get a WUSB100 installed on a Dell Latitude with a frsh install of Ubuntu
[01:18] <DrinkingDrunkLov> 10.04
[01:18] <hiexpo> !ask \ DrinkingDrunkLov
[01:18] <subspider> mek||malloc, not working
[01:18] <subspider> have the folder there
[01:19] <Niglop> is anybody in here really good with conky? (i have been in #conky for 24 hours and nobody has talked except me :p)
[01:19] <rebirth> DasEi: "not all updates can be installed. run a partial upgrade to install as many updates as possible.." that's from updrage manager
[01:19] <HoNgOuRu> when I use the "make" command it tell me error number 2, and expected ) )
[01:19] <chemical-death> shsek: it depends on the package which were remove through your working
[01:19] <HoNgOuRu> am I missing a compiler or anything?
[01:19] <Dunas> Attempting to install or load the liveDVD of Ubuntu 10.04 x64 results in a black screen about 3/4 the way into the loading sequence, the monitor declaring it has lost signal from the graphics card, and a complete inability to do much else from that point. Graphics card is an ATI HD5770. Any help? At all? :C
[01:19] <th0r> Niglop: some information about your issue might get you an answer.
[01:19] <DasEi> rebirth: that's no error, that's just some files are in use,  can do :
[01:19] <bofh80> sebell: do normal dvds read ok ?
[01:19] <DrinkingDrunkLov> All the docs that I find on the subject are for older versions of Ubuntu
[01:19] <rebirth> DasEi: sudo apt-get update does not give any errors
[01:19] <shsek> chemical-death, I found an Ubuntu 9.04 (server) disk, can I use this if I'm on 9.10?
[01:20] <Niglop> ok th0r
[01:20] <Niglop> <Niglop> I am getting this error message when running my conky config: Conky: llua_do_call: function conky_ring_stats execution failed: attempt to call a nil value
[01:20] <Niglop> <Niglop> the config is: http://paste.ubuntu.com/476420/
[01:20] <Niglop> <Niglop> rings.lua at ~/bin/ is http://paste.ubuntu.com/476422/
[01:20] <sebell> bofh80: no, I get nothing.
[01:20] <DrinkingDrunkLov> ubottu i love you
[01:20] <DasEi> rebirth: sudo init 1 , in that gui choose dpkg...,  after it finished, choose netroot, there enter : service gdm start
[01:20] <HoNgOuRu> when I use the "make" command it tell me error number 2, and expected ) ) am I missing something here?
[01:20] <laptop_fur> ok it is working on my headset
[01:20] <laptop_fur> but it sounds like garbage
[01:20] <laptop_fur> the stereo sound keeps screwing up
[01:20] <DrinkingDrunkLov> laptop_fur: it means that is i not working
[01:20] <chemical-death> shsek: im not sure but i guess they uses the same version of grub
[01:21] <thune3> shsek: from livecd you might be able to mount and look at the /media/your_root_ubu_partition/var/log/apt/term.log and look at what you actually removed. How you recover depends on what was removed.
[01:21] <laptop_fur> how do I fix the crappy sound?
[01:21] <bofh80> sebell: have you tried to boot of the livecd or anything to make sure the drive hasn't just packed up ? ie have u verified the drive is working normally and it's just ubuntu
[01:21] <laptop_fur> Oh and when I turn the volume up, it makes an aweful high-pitched "eeeeeeeeeeeeeeee"
[01:21] <DrinkingDrunkLov> laptop_fur: possibly buy better speakers or a good headset
[01:21] <laptop_fur> dude
[01:21] <hiexpo> DrinkingDrunkLov,  your yss? right    :)
[01:21] <laptop_fur> this hedset works perfectly on the other computer
[01:22] <thune3> shsek: i'm not an expert in chroot, but a chroot and a a few apt commands might be all that's needed.
[01:22] <DrinkingDrunkLov> yss?
[01:22] <sebell> hmm.  not yet.  good idea, brb after I check that.
[01:22] <BluesKaj> laptop_fur, running pulseaudio?
[01:22] <laptop_fur> no
[01:22] <th0r> Niglop: the first thing you do is define name as 'time', but the comment above it doesn't offer that as an option
[01:22] <laptop_fur> HDA intel
[01:22] <chemical-death> shsek: try to do what thune3 told you
[01:22] <bonjour> mine is ok though
[01:23] <Sayura> Heya, anyone know a channel for UML/OCL?
[01:23] <DrinkingDrunkLov> laptop_fur: do you have the correct drivers for your sound card?  Is it happening with speakers?
[01:23] <BluesKaj> laptop_fur, are you sure ? it runs on top of alsa on some systems
[01:23] <shsek> thune3, okay, great. I'll do that
[01:23] <laptop_fur> The speakers dont make any sound
[01:23] <shsek> checking the log, I mean
[01:23] <rebirth> DasEi: as soon as i ran sudo init 1 it reboot and launched a screen that didn't appear to have any use input
[01:24] <nimbiotics> is there a chanel for dd-wrt?
[01:24] <bofh80> laptop_fur: it's also a good idea to check the alsa-mixer console volume control. thereare sometimes settings that don't show in the gnome applet
[01:24] <laptop_fur> where is that?
[01:24] <bofh80> bring up a terminal - type alsamixer  hit return
[01:24] <DrinkingDrunkLov> laptop_fur: then the volume out put is the peroblem from the sound device, look in drivers from the sound device and complie somthing with a higher output
[01:24] <bonjour> aye...
[01:24] <DasEi> rebirth: arrow up n down,  enter, first the dpkg... , second the netroot option, there you get a commandline again
[01:24] <th0r> Niglop: and it looks like you have replicated the settings table in the config file.
[01:25] <shsek> thune3, any idea how I can see the partitions on my hard drive from there? fdisk doesn't seem to be working, and I can't quite remember which parition is the root one
[01:25] <sean> join #magic-league
[01:25] <rebirth> DasEi: can you tell me the commands again so i can write them down
[01:25] <DasEi> shsek: sudo fdisk -l  does it
[01:25] <Niglop> which config th0r conky or lua
[01:25] <laptop_fur> ugh this is annoying
[01:26] <DrinkingDrunkLov> laptop_fur?
[01:26] <laptop_fur> what causes that static crap and that high pitced "EEEEEEEEEE"?
[01:26] <DasEi> rebirth: just one, from netroot: service gdm restart
[01:26] <th0r> Niglop: rings.lua lines 20 and 282
[01:26] <laptop_fur> *pitched
[01:26] <Niglop> holdup one sec th0r
[01:26] <DrinkingDrunkLov> laptop_fur the coding in the drivers
[01:27] <Dunas> Attempting to install or load the liveDVD of Ubuntu 10.04 x64 results in a black screen about 3/4 the way into the loading sequence, the monitor declaring it has lost signal from the graphics card, and a complete inability to do much else from that point. Graphics card is an ATI HD5770. Any help? At all? :C
[01:27] <DrinkingDrunkLov> laptop_fur: have you made sure the plugs in your card are secure and in the correct places?
[01:27] <neil_d> when I startup openoffice workprocessor and try to use the 'tools->bibliographt database" menu option OpenOffice crashes... is there something I need to install to make this work?
[01:27] <shsek> DasEi, from ash running from the installion CD? I don't seem to have that command...
[01:27] <thune3> shsek: fdisk should work with sudo, and a mount should happen by selecting the correct partition in the Places menu
[01:27] <DasEi> laptop_fur: https://help.ubuntu.com/community/HdaIntelSoundHowto
[01:28] <rebirth> DasEi: so i'm going to enter "sudo init 1", selected dpkg, then netroot, then enter "service gdm restart"?
[01:28] <DasEi> shsek: yes, terminal in live cd has that , with -l  being lower L
[01:28] <th0r> Niglop: I haven't used the circular meters in conky, so haven't any experience with this config. It appears you are attempting to define something named 'time', but there are (I think) four definitions of time in each settings table.
[01:28] <Zvezda> hello
[01:28] <DrinkingDrunkLov> hi Zvezda
[01:28] <shsek> thune3, I'm sorry, which Places menu?
[01:28] <DasEi> rebirth: 100 %
[01:28] <rebirth> DasEi: ok here goes
[01:28] <Niglop> ok th0r  i am deleting all the configs and redoing them, if the error is still there i will get back to you
[01:29] <shsek> thune3, and yes, that's the way I used it. but I don't have sudo nor format...
[01:29] <shsek> thune3, DasEi, maybe I started the wrong shell or something?
[01:29] <Zvezda> I just installed Xubuntu on a computer for the first time.  n00b here!  How do I configure the TV-Out (S-Video) of my Nvidia GeForce graphics card?  I usually use my TV to watch videos on
[01:29] <thune3> shsek: i guess i missed something, i thought you booted to ubuntu livecd with gui
[01:29] <DasEi> shsek: alt+F2  , enter gnome-terminal
[01:29] <laptop_fur> sorry I was away
[01:29] <shsek> I got to "Ubuntu installer main menu" by pressing ESC, than choose "Execute a shell"
[01:30] <laptop_fur>  laptop_fur: then the volume out put is the peroblem from the sound device, look in drivers from the sound device and complie somthing with a higher output   | How do you do this?
[01:30] <shsek> thune3, no, its Ubuntu Server
[01:30] <DasEi> shsek: in gnome-terminal :  sudo fdisk -l
[01:30] <chrispitzer> ok - upstart vs supervisord for managing wsgi services - any opinions?
[01:30] <Just_Drnknoask> laptop_fur: reference my nick, I honestly have no clue
[01:30] <shsek> DasEi, I don't think I can get to gnome-terminal... can I?
[01:30] <Jordan_U> DasEi: I think he's using the alternate install CD.
[01:31] <laptop_fur> btw, the card came with the laptop. I dont know how it couldnt be in the right place
[01:31] <DasEi> Jordan_U: heh
[01:31] <shsek> DasEi, just to make it clear: I'm on the Ubuntu Server CD installer, I pressed ESC, got to "Ubuntu installer main menu", choosed "Execute a shell" and got 'After this message, you will be running "ash", a Broune-shell clone'
[01:31] <DasEi> shsek: are you using the alternate cd ?
[01:31] <Just_Drnknoask> laptop_fur: it came with Ubuntu installed?
[01:31] <Zvezda> brb
[01:32] <laptop_fur> huh no
[01:32] <laptop_fur> It came with vista
[01:32] <DasEi> shsek: ic, no there that won't work, I assumed you where in a live-cd environment
[01:32] <sebell> outstanding.  installing a new o/s has apparently made me lose all confidence in my pc troubleshooting abilities....  GAH
[01:32] <maco> sebell: just reframe it
[01:32] <sebell> dvd drives work just fine.  when in doubt, reboot.
[01:32] <chemical-death> shsek: i guess it would be easier to download a ubuntu desktop 9.10 if it's the version you use. start your from that cd and do all other thing we told you before
[01:33] <maco> sebell: you had *windows* troubleshooting skills, but not general-to-all-computers ones...
[01:33] <marcelo> me pasan el canal de unbutu español??
[01:33] <DasEi> https://help.ubuntu.com/community/HdaIntelSoundHowto , laptop_fur, vaio's  are reported to be little beastyon ubuntu, but there are workarounds
[01:33] <Just_Drnknoask> laptop_fur: Ubunto is a total different animal then Windows Vista...I mean there is no point and click and really no such thing as "plug in play" not atleast how Bill Gates would want you think "
[01:33] <sebell> maco: ya.  got a lot to learn.  :)
[01:33] <Just_Drnknoask> "plug n play" is
[01:33] <laptop_fur> I know
[01:33] <DasEi> !es | marcelo,  see above
[01:33] <shsek> DasEi, I can mount partitions and read them, I just need to find out which partition is mounted to '/'
[01:33] <laptop_fur> WIndows sucks. I am tired of being screwed over
[01:33] <maco> Just_Drnknoask: plug n pray has always been the case, win or lin :P
[01:34]  * t-flo 
[01:34] <Just_Drnknoask> laptop_fur: I mean we are talking about going from a calm indoor nice kitten to some Chetta that you have to train and hope not to die
[01:34] <maco> Just_Drnknoask: stop trying to scare people
[01:35] <Just_Drnknoask> Maco: sorry
[01:35] <maco> experiences will vary depending on hardware support
[01:35] <chemical-death> shsek: if your did fdisk -l there you see alot partions the first linux partition after the swap (the littlest linux partition) is mostly the root partition.
[01:35] <maco> and depending on use-case
[01:35] <shsek> chemical-death, I don't have fdisk
[01:35] <neil_d> when I startup openoffice workprocessor and try to use the 'tools->bibliographt database" menu option OpenOffice crashes... is there something I need to install to make this work?
[01:35] <maco> some people just need to check email, web browse, etc... and they shouldnt have problems. others need to do HD video editing, and then... well, Ubuntu Studio exists, but i dont know what apps to use :P
[01:35] <shsek> I'm on BusyBox's built-in shell, ash, from the Ubuntu Server installion disk
[01:35] <chemical-death> shsek: try it with the correct live cd of your version you have installed. it would make it easier
[01:36] <DasEi> shsek:  a standard live environment would make that easier, you neither have a disk around or a working os to burn one ( or use a usb-stick , if the box supports booting it)
[01:36] <Just_Drnknoask> maco: errrm like me who needs to hook up a wireless internet USB card to his laptop WUSB100 Linksys
[01:36] <bofh80> Just_Drnknoask: Vista is more like a dog with rabies, pls.
[01:36] <shsek> DasEi, I'm on a laptop without a CD burner, and don't have any usb flash disk I can use :S
[01:36] <Just_Drnknoask> maco: and no one has been able to get it work :(
[01:36] <sebell> heheh.  BASH: a description of what Windows users do to their keyboards when trying to navigate with it.
[01:37] <Niglop> ok th0r i am getting the same error, what showed you it was an error with like 20 and 282?
[01:37] <Just_Drnknoask> maco: This card is my Cheta and he is not going to run away!
[01:37] <DasEi> shsek: and the installed ubuntu does what at bootup ?
[01:37] <maco> Just_Drnknoask: like i said "depending on hardware support" ... USB is very hit-or-miss. built-ins are better supported (more testers --> more bug reports --> more fixes)
[01:37] <th0r> Niglop: not an error, duplication of definitions. It appears the table beginning at line 282 is a duplicate of the table at line 20
[01:38] <laptop_fur> what does permission denied mean?
[01:38] <shsek> DasEi, <shsek> I installed initramfs-tools, it made some kernel changes (http://pastie.org/1087245.txt?key=tcpk0140qpqvpqmagohww). Than I realized I don't actually need it, and removed it, which displayed some errors (that I don't have). Now, after a restart, I'm getting "Error 15: file not found. Press any key to continue...". When I do press a key I get the boot menu, and every option causes the same error (other than memtest of course)
[01:38] <Niglop> th0r»  there is no line 282 :s
[01:38] <bofh80> "the computer says no"
[01:38] <DasEi> laptop_fur: on which command ?
[01:38] <Niglop> it goes up to 262 th0r
[01:38] <laptop_fur> /usr/share/doc/alsa-base/driver/ALSA-Configuration.txt.gz
[01:38] <Just_Drnknoask> maco: but I do not need such a laptop for Ubuntu...
[01:38] <maco> laptop_fur: thats not an executable file
[01:38] <th0r> Niglop: there is in the pastebin http://paste.ubuntu.com/476422/
[01:38] <laptop_fur> ugh
[01:38] <maco> laptop_fur: thats a text file. you read it...
[01:38] <shsek> DasEi, seems like its installed by default, and by removing it I caused some issues
[01:39] <maco> laptop_fur: zless /usr/share/doc/alsa-base/driver/ALSA-Configuration.txt.gz
[01:39] <bofh80> it's a read only gzip file, you need to unzip it somewhere else . or do what he said :)
[01:39] <Just_Drnknoask> maco: ?  .gz is like .zip?  Use 7zip and extract?
[01:39] <maco> Just_Drnknoask: id give a live cd of 10.10 Alpha 3 a try. it has a newer kernel, so hardware support should be improved
[01:39] <DasEi> shsek: ic, so need an updategrub and maybe initramfs,  really, this needs a live environment or hook up the hd to another box
[01:39] <bofh80> the whole /usr dir's are readonly
[01:39] <Niglop> oh th0r  i think that one repeats itself.. i must have accidently pasted it twice, but i fixed that it only shows once now.
[01:39] <Niglop> th0r» what is the problem on line 20?
[01:39] <th0r> Niglop: the one I am looking at goes to line 525
[01:39] <maco> Just_Drnknoask: yes it is like zip, but zless is a program for reading compressed data without having to unzip/gunzip/bz2unzip it first
[01:39] <bofh80> unless you sudo / or log in as root
[01:40] <thune3> neil_d: according to https://bugs.launchpad.net/ubuntu/+source/openoffice.org/+bug/588306 and http://ubuntuforums.org/showthread.php?t=1506450 , installing package openoffice.org (not installed by default) will fix the problem
[01:40] <th0r> Niglop: if you deleted the table at line 282 then there is no problem at line 20. But I do have a question about your definitions of 'time'
[01:40] <shsek> DasEi, will on old Ubuntu Desktop install CD help or I need the current/a recent version?
[01:40] <maco> Just_Drnknoask: if 10.10 doesnt have support for it yet, there's still 2 months to get it fixed before 10.10 is released. definitely file a bug report
[01:40] <Niglop> ok th0r
[01:40] <BChow> Why if usb modem i plug, the usb storage can't mount?
[01:40] <BChow> I configure the usb modem on udev....
[01:40] <histo> test
[01:40] <Just_Drnknoask> maco: you answered my question before I asked
[01:41] <DasEi> shsek: an older version can help, but as it's grub 2 .. how old ?
[01:41] <histo> sorry
[01:41] <Just_Drnknoask> maco: any suggestions of any cards we know alread work with 10.04?
[01:41] <Jordan_U> shsek: An old CD will work fine as long as it supports ext.
[01:41] <shsek> DasEi, someone here told my the error I got ("Erro 18: ...") is implying I'm using grub-legacy
[01:41] <th0r> Niglop: according to the lua script the arg is whatever you are calling in the config, but the arguments you use in the config (%A, %B,etc) aren't all defined in the lua script. But remember...I haven't actually worked with the circular meters in conky or the lua script myself
[01:41] <Jordan_U> shsek: *ext4
[01:41] <shsek> Jordan_U, why 4? I don't think I'm using ext4
[01:41] <omirix> Hi there - I'm trying to do an .htaccess mod_rewrite to SILENTLY send people from http://myBlog.com/test/ (a non existing directory) to http://myBlog.com/aPermalink (a permalink on Wordpress that would normally work if accessed directly), but it seems that my redirect is OVERRIDING the WordPress permalink, and instead trying to access http://myBlog.com/aPermalink as if it were a real directory. see: http://pastebin.com/ixVXhgGe
[01:42] <maco> Just_Drnknoask: this is my usual reference http://linux-wless.passys.nl/query_hostif.php?hostif=USB
[01:42] <Niglop> hmm, do you know what could case that error message th0r
[01:42]  * shsek goes looking for some Ubuntu Desktop CD
[01:42] <neil_d> thune3: thanks for that I am installing now!  I will let you know if it works.
[01:42] <DasEi> shsek: so is there any live cd around you can boot ? so least we cann pull down the if and whens ?
[01:42] <thune3> neil_d: please do
[01:42] <Just_Drnknoask> maco: if I call Lynksys they would say they do not support Ubuntu right?
[01:42] <Jordan_U> shsek: All that's needed is a live environment that can mount your root and /boot filesystems.
[01:42] <DasEi> shsek: and waht a system you're talking off from now ?
[01:42] <tktiddle> can I delete the entire contents of /tmp safely?
[01:42] <th0r> Niglop: I think it is a result of calling {time %A, %d %B %Y} without telling the lua script what those parameters are
[01:42] <laptop_fur> ugh
[01:43] <maco> Just_Drnknoask: keep in mind, most shops will let you return something if it doesnt work with linux, so you can try anything green on that list and if it turns out not to work you can return it
[01:43] <hjst> so it looks like 10.04 Netbook edition has compositing disabled? I can't change any options in "Visual Effects" in the Appearances prefs - is there some way to enable compositing? my machine handles it fine in Windows
[01:43] <Just_Drnknoask> laptop_fur: I feel your pain!!!
[01:43] <Niglop> how can I tell it th0r
[01:43] <maco> Just_Drnknoask: and if something green doesnt work, email the person who keeps that list so they know to correct it
[01:43] <Just_Drnknoask> maco: E-mail person on list?
[01:43] <tktiddle> dosnt matter its already empty
[01:43] <maco> Just_Drnknoask: the webpage i linked
[01:44] <shsek> DasEi, just found some old Ubuntu 7.04 (Desktop) CD, and I didn't quite understand the second question
[01:44] <maco> Just_Drnknoask: there's a person who keeps track of linux support for every model and revision of wireless card he or she comes across
[01:44] <maco> Just_Drnknoask: they provide their email address on there for corrections to be sent in
[01:44] <th0r> Niglop: I think you have to define a 'time' element in the settings table that tells lua how to draw {time %A, %d %B %Y}
[01:44] <laptop_fur> I hate it when help documents do not explain what to do
[01:44] <Just_Drnknoask> maco: KK I will do, Walmart is geting thi card back an do not even know why I bought from Walmart....which company...Boradband or etc....would you suggest?
[01:44] <DasEi> shsek: so boot it and come back in here, so we can find some answers about your system
[01:45] <rebirth> DasEi: i never got to a UI, i copied down everything it said. http://pastebin.com/yUTAcSUr
[01:45] <Niglop> ok thanks th0r
[01:45] <DasEi> shsek: second was, what a kinda os are you currently talking from ?
[01:45] <laptop_fur> I have no idea what that file is and how it is supposed to help me
[01:45] <maco> Just_Drnknoask: check the page... and hmm lemme try phoning a friend who has a USB card that works
[01:45] <th0r> Niglop: it would start with name='time' and arg='%A, %d %B %Y'
[01:45] <Just_Drnknoask> laptop_fur: Half of this adventure in Linux is development and figuring out...which is the reason I did not just return this card
[01:45] <Just_Drnknoask> maco: thanks
[01:45] <th0r> Niglop: or you might define a separate entity for each of those args one at a time
[01:45] <DasEi> rebirth : back on desktop now ?
[01:46] <Niglop> I am not familier with lua th0r :(
[01:46] <Niglop> I just put ''time' and arg='%A, %d %B %Y' in the script?
[01:46] <rebirth> DasEi: hmm? what do you mean?
[01:46] <shsek> DasEi, currently I'm on my laptop, running, unfortunately, Windows
[01:46] <shsek> DasEi, the other machine with Ubuntu is my server
[01:46] <laptop_fur> Codec: Realtek ALC262
[01:46] <laptop_fur> Codec: Conexant ID 2c06
[01:46] <laptop_fur> wtf
[01:46] <rebirth> DasEi: this is the same computer, i typed all that into my ipod and emailed it to myself
[01:46] <maco> Just_Drnknoask: that friend's not answering phone right now, sorry
[01:46] <laptop_fur> now it says the sound card is realtek
[01:47] <DasEi> shsek: which is another box and has this grub error, k
[01:47] <Just_Drnknoask> laptop_fur@!!!  WAIT!!!  He have th same prob
[01:47] <laptop_fur> ?
[01:47] <Just_Drnknoask> laptop_fur: My card is made Realtek...whatever makes me work will make you work!!
[01:47] <laptop_fur> cool
[01:47] <DasEi> shsek: so boot live cd in server
[01:47] <th0r> Niglop: each entity in the settings table tells conky how to draw a circular 'gauge'. The problem I think is that you are trying to draw something you haven't defined yet...a gauge for {time %A, %d %B %Y}
[01:47] <maco> Just_Drnknoask: thats not how it works
[01:47] <shsek> hmm, I wonder if I can open bash from inside of Gnome without a mouse
[01:48] <laptop_fur> I am sick of the mosquito
[01:48] <Just_Drnknoask> maco:???  Realtek!!!!
[01:48] <maco> Just_Drnknoask: realtek is one of a dozen companies making tons of codecs each
[01:48] <SirFunk> Hey all... I have this strange feeling that all applicatoins on my machine are leaking memory
[01:48] <Niglop> oh i see thanks t0r
[01:48] <shsek> DasEi, yeah, its booting, but I just realized this machine has no mouse, I wonder if I can manage without it
[01:48] <bofh80> Just_Drnknoask: can you run lsusb and paste me the out to a pm or pastebin
[01:48] <Just_Drnknoask> Ohh :(
[01:48] <cheasee> anybody has experiences with http://blog.wpkg.org/2009/04/23/cipher-benchmark-for-dm-crypt-luks/ ... http://marc.info/?l=linux-kernel&m=127532188803414&w=4 ? please pm me!
[01:48] <th0r> Niglop: but I am not a lua programmer by any means...so this is just a starting point
[01:48] <Just_Drnknoask> Sorry again Lap:
[01:48] <rebirth> DasEi: more info: i actaully am getting sound out of my speakers, i can hear youtube video, but no sound from amarok
[01:49] <bastid_raZor> shsek: alt + F2 should bring up a Run menu and you can type in any application you wish to run.
[01:49] <DasEi> rebirth: ah, getting warmer..
[01:49] <shsek> DasEi, okay - gnome-terminal is open
[01:49] <Just_Drnknoask> Maco: hey I need to give this a break, call your contact when you can, I will try to catch you tomorrow.  I am going to return this WUSB100 and give up
[01:49] <rebirth> DasEi: but not sound through the ozone at all
[01:49] <SirFunk> according to Top: Clock-applet is using 402mb of memory.. that's not right
[01:49] <shsek> DasEi, should I start by mounting my root to the livecd env?
[01:49] <Just_Drnknoask> Maco: Then get a suggestion on what to run on this dell
[01:49] <SirFunk> and Xorg is using 800mb
[01:50] <DasEi> shsek: see above, can type gnome-terminal there to launch a shell
[01:50] <maco> Just_Drnknoask: ok.i left him a message in PM so will see when he answers
[01:50] <Just_Drnknoask> Lap: I wish you the best of luck
[01:50] <DasEi> shsek: no, we will do later, but can, won't harm
[01:50] <Just_Drnknoask> Maco: it is late PM here so
[01:50] <DasEi> rebirth :open terminal ..
[01:51] <Just_Drnknoask> Bye everyone
[01:51] <arjun> Hi need  help to get international fonts display on gnome, after a fresh reinstall of gnome
[01:51] <maco> Just_Drnknoask: by PM i meant private message, not evening ;-)
[01:51] <rebirth> DasEi: ok
[01:51] <DasEi> rebirth :gksudo gedit /etc/default/grub
[01:51] <SirFunk> actually, i'll be back
[01:51] <bofh80> Just_Drnknoask: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/350695   check the end of hte this post if it matches your card, there is a fix
[01:51] <laptop_fur> btw will logitec cams work on ubuntu?
[01:52]  * Just_Drnknoask spreads his wings and flys off from here...to where he dose not know, but he wil.....!!!! Ohhh I see big PINK Dots and MONEY!!! ohhh bye everyone....beers for everyone!!!!!!!!!!
[01:52] <shsek> DasEi, okay, what should I do than?
[01:52] <shsek> BTW, thank you very much for all the help and your time
[01:52] <japa_> i have a question, is there a way to turn on vsync for Xv on open ati drivers??
[01:53] <DasEi> rebirth :grub hidden timeout...  =false   (true by default)  , and following grub timeout to 10, if not set already
[01:53] <rebirth> DasEi: want me to pastebin it?
[01:53] <DasEi> rebirth: later
[01:53] <DasEi> rebirth: save the file, close gedit
[01:53] <HermanDE> Any suggestions for a good web events calendar product?
[01:53] <rebirth> DasEi: GRUB_HIDDEN_TIMEOUT=0
[01:54] <DasEi> rebirth: pastebinit /etc/default/grub
[01:54] <DasEi> rebirth: change to 10
[01:54] <DasEi> rebirth: nah, stop
[01:54] <rebirth> wait what
[01:54] <rebirth> DasEi: ok i haven't saved the file, what do you want me to do?
[01:55] <DasEi> rebirth: that hidden is fine with 0, the grub_timeout is to be set to 10
[01:55] <DasEi> rebirth :grub hidden timeout...  =false   (true by default)  , and following grub timeout to 10, if not set already
[01:55] <stopher123> Is there a way to have a ubuntu time server give devices local time instead of Universal time?
[01:55] <nimbiotics> dsf
[01:55] <rebirth> DasEi: GRUB_HIDDEN_TIMEOUT_QUIET=true
[01:55] <laptop_fur> .
[01:55] <DasEi> rebirth: change to false
[01:56] <rebirth> DasEi: ok i changed that to false and timeout to 10
[01:56] <nimbiotics> do you guys copy me?
[01:56] <DasEi> rebirth: save n close
[01:56] <chris___1> q
[01:56] <DasEi> rebirth: pastebinit /etc/default/grub
[01:56] <rebirth> http://pastebin.com/3qD3TJ7M
[01:57] <shsek> DasEi, hmm, that's odd, I can't seem to mount it
[01:57] <bonjour> no
[01:57] <bonjour> your words are just noise
[01:57] <ianwizard> idle ramblings, into the night...
[01:58] <DasEi> rebirth: line 5 statys at 0,  and false not in capitals
[01:58] <fahd> hello
[01:58] <ianwizard> hi
[01:58] <DasEi> rebirth :gksudo gedit /etc/default/grub
[01:58] <shsek> DasEi, my primary hard-disk is usually /dev/sda and my external hard drive is /dev/sdb - now my external one is /dev/sda, while (what seems to be) the primary is /dev/hdc
[01:58] <fahd> want to ask something
[01:58] <DasEi> shsek: terminal open ?
[01:58] <DasEi> !paste
[01:58] <ianwizard> fahd: then ask, rather than just asking if you can ask.
[01:59] <rebirth> DasEi: http://pastebin.com/6R1BAVCi
[01:59] <shsek> DasEi, yes
[01:59] <fahd> #ubuntu how to change the grub image ?
[01:59] <neil_d> thune3: That seems to be working now!  A warning about something not installed would have been nice.
[01:59] <fahd> i need to change that
[01:59] <DasEi> shsek: sudo fdisk -l , paste the output
[01:59] <LinuxPhreak1> How long does it take Debian Live Magic to build netboot system in Ubuntu?
[02:00] <ianwizard> fahd: the default LINUX image that is booted, or are you talking about something else?
[02:00] <DasEi> rebirth: fine, save n quit gedit
[02:00] <DasEi> rebirth: sudo update-grub
[02:00] <Dunas> Attempting to install or load the liveDVD of Ubuntu 10.04 x64 results in a black screen about 3/4 the way into the loading sequence, the monitor declaring it has lost signal from the graphics card, and a complete inability to do much else from that point. Graphics card is an ATI HD5770. Any help? At all? :C
[02:00] <LinuxPhreak1> I ask because it is been going on for about 27 hours now
[02:00] <shsek> DasEi, any idea how I could do that from command line?
[02:00] <shsek> there should be some fdisk -l | pastebin thingy that outputs the URL
[02:00] <fahd> ianwizard: yes, i ask about how to change grub IMAGE(pict)
[02:00] <rebirth> DasEi: done
[02:01] <fahd> ianwizard:the default one is only black right?
[02:01] <DasEi> rebirth: at next reboot, when grub starts loading, press left shift,  choose second entry (recovery mode)  to get to that init 1 GUI  (dpkg and netroort/ root  there)
[02:01] <ianwizard> fahd: oooooohhhhhh, I thought you meant something else.  you're talking about the image behind the grub boot menu, right?
[02:01] <DasEi> rebirth: sudo reboot
[02:01] <fahd> ianwizard: yes. :D
[02:01] <shsek> DasEi, I can tell you what I have there, it'll be easier for me - /dev/sda1-/dev/sda3 is my external hard-drive three ext3 partitions, which the live-cd mounted automatically
[02:02] <neil_d> Dunas: I believe the LiveCD has quite a few optional parameters you could try.. like vesa mode.
[02:02] <DasEi> shsek: can just call pastebin.com in browser and copy from terminal to it
[02:02] <ianwizard> fahd: the default is none at all,  and you computer monitor is black.  I don't know how to change it, but you could probably find it on google
[02:02] <rebirth> DasEi: and then enter "service gdm restart"?
[02:02] <DasEi> shsek: ah, no mouse
[02:02] <shsek> DasEi, I don't have a mouse :\
[02:02] <shsek> yeah
[02:02] <ianwizard> fahd: start with something like "grub background image"
[02:02] <DasEi> rebirth: first dpkg, then from cmd line service....
[02:02] <shsek> DasEi, /dev/hdc1, /dev/hdc2 and /dev/hdc5 (3 and 4 are missing) is my internal hard-drive with ubuntu on it, /dev/hdc1 is 'Linux LVM', /dev/hdc2 is 'Extended' and /dev/hdc5 is 'Linux'
[02:03] <fahd> ianwizard: i have been searching it and i found it. but i dont know how to change permission to copy .jpg file to bootloader folder?
[02:03] <shsek> which is odd, as this hard drive is named "/dev/sdaX" usually
[02:03] <bofh80> Dunas: the standard way around this i believe (without googling around) will be to use the alternate CD to do the install
[02:03] <DasEi> rebirth: if apt won't connect in dpkg,  then call netroot one time, go back to miniGUI  by entering exit, then update completly, then start gdm
[02:04] <ianwizard> What command should I use to change to owner on all of the folders, and files in my home dir (to my username, rather than root)  I've been using chmod -R username /home/username  but that doesn't seem to be working now.
[02:04] <ianwizard> fahd: use sudo
[02:04] <rebirth> DasEi: a little confused but i'll see what i can do
[02:04] <fahd> ianwizard:not working :(
[02:04] <ianwizard> fahd: sudo cp image.jpg /boot/grub/image.jpg
[02:04] <fahd> its a system file
[02:04] <bofh80> Dunas: i'm also quite sure there are graphics options on the boot menu ?
[02:05] <fahd> okay thanks @ianwizard :)
[02:05] <ianwizard> fahd: try doing sudo su, and then copying it.
[02:05] <DasEi> shsek: so hdc1 will be your root
[02:05] <ianwizard> sometimes it makes a differance, I've got to go now though.
[02:05] <ianwizard> goodluck
[02:05] <DasEi> shsek: mount                    is hdc1 already mounted ?
[02:05] <ianwizard> bye all
[02:06] <gimpy253> Still having trouble with 10.04.  How do I get into the GRUB menu at boot?  I have already tried left shift and enter as previously told, still does not work.
[02:06] <shsek> DasEi, nope, Ubuntu didn't mount it automatically (it did mount /dev/sdaX) and I get "unknown filesystem type 'LVM2_member'" when I try to manually do it
[02:07] <DasEi> shsek: sudo mkdir /media/hdc1
[02:07] <DasEi> shsek: sudo mount /dev/hdc1 /media/hdc1
[02:07] <rebirth> DasEi: ok here i go
[02:07] <Dr_Willis> gimpy253:  i have had some desktpp machines that have issues with GRUB and USB keyboards. basically i had to use a PS2 keyboard. or make sure the Legacy USB item in the bios was enabled.
[02:07] <DasEi> shsek: cd /media/hdc1
[02:07] <DasEi> rebirth: worked ?
[02:07] <gimpy253> Dr_Willis: It's PS/2
[02:07] <Dr_Willis> gimpy253:  shift should show the menu. or esc. I always set the grub config to always show the menu  item.
[02:07] <DasEi> shsek: ls                    , your filesystem there ?
[02:08] <gimpy253> Dr_Willis: How do I set up GRUB2 to do this?  What needs changed in /etc/default/grub?
[02:08] <shsek> DasEi, I alreay tried that, I'm getting "unknown filesystem type 'LVM2_member'"
[02:08] <Dr_Willis> Check the grub2 docs/wiki page. it tells you what to change in /etc/default/grub
[02:08] <Dr_Willis> !grub2  | gimpy253
[02:09] <DasEi> shsek: so not correct info from fdisk -l then.. idk if 7.04 has pastebinit on live repo:
[02:09] <DasEi> shsek: sudo apt-get install pastebinit
[02:09] <DasEi> shsek: finding it ?
[02:09] <shsek> nope, it doesn't find that package
[02:09] <DasEi> rebirth: status quo ?
[02:10] <shsek> I was just trying to do it manually with curl
[02:10] <rebirth> DasEi: i pressed left shit a lot but nothing came up
[02:10] <annie> later room
[02:10] <DasEi> rebirth: grub-version    responses ?
[02:10] <FyreFoX> hi, I was using 64bit flash on ubuntu but then adobe scrapped support for it. What are the alternatives to running an older vulnerable 64bit flash?
[02:10] <biodegabriel> Hey Everyone, How do I find out if my filesystem has 'no exec' on it? Is there a command or something to see that?
[02:10] <rebirth> DasEi: it doesn't really show me anything ecept the ubuntu-studio loading screen
[02:11] <bofh80> i found it best to just hold shift once the bios screen showed till i got a grub menu.
[02:11] <shsek> DasEi, I can't install curl tho, I ran apt-get update and I still get 404 errors when trying to install it
[02:11] <rebirth> alright i'll try again just holding down shift the whole time
[02:11] <DasEi> rebirth: that's too late, it has to be done once the bios is finished
[02:11] <rebirth> ok
[02:11] <Dr_Willis> biodegabriel:  check the mount command and what it says about the filesystem in question
[02:12] <DasEi> rebirth: don't hold it, just tap it few times
[02:12] <Dr_Willis> rebirth you hit the shift key BEFOR you would see that loading screen
[02:12] <biodegabriel> Dr_Willis THX
[02:12] <DasEi> Dr_Willis: already out
[02:12] <Dr_Willis> I wonder if theres a brainstorm suggestion to NOT have grub auto hide.. it just causes to many problems..
[02:13] <DasEi> (rebir..)
[02:13] <japa_> is there a way to enable vsync in open source ati driver for xv output?? Without vsync videos are unwatchable, because of tearing. It's the last thing that doesnt work for me in ubuntu.
[02:13] <shsek> Dr_Willis, doing so will cause longer boot time
[02:13] <Alan502> Hi, I've looked in system>monitors but the only refresh rate i can choose is 60hz. How can I choose a higher refresh rate? The reason why i wanna do that is because for some awkward reason green spots appear on my screen if the refresh rate is not above 60 (the green spots do not appear on windows xp)
[02:13] <Dr_Willis> japa_:  if using compiz theres a 'vsync' option for compiz i found that elimintated tearing for me.
[02:13] <DasEi> Dr_Willis: hmm, or a 3 second grubscreen.. we altered grub before, already
[02:13] <bofh80> it's the kind of things that start happening when you claim a 10 second boot and can't produce :P
[02:13] <shsek> DasEi, what should I do, than?
[02:13] <Dr_Willis> shsek:  a whole 1 sec or perhaps 3 ..  woopiee. :)
[02:14] <japa_> Dr_Willis: where i can find that option??
[02:14] <Dr_Willis> japa_:  its in the CCSM tool settiongs somewhere.. i forget where. i always have tos easrch for it.
[02:14]  * Iceman_B throws KE1HA a beer
[02:14] <DasEi> shsek: I wonder if should ssh in ... how does this server connect to the inet ?
[02:14] <KE1HA> :-)
[02:15] <shsek> inet=internet or some term I don't know?
[02:15] <shsek> its connected to a router
[02:15] <japa_> Dr_Willis: ccsm?? whats this??
[02:15] <Dr_Willis> !ccsm
[02:15] <DasEi> shsek: inet is internet
[02:15] <Dr_Willis> japa_:  compisconfiog-settings-manager 'ccsm'
[02:15] <japa_> Dr_Willis: ok thank you very much for answer
[02:15] <shsek> DasEi, it does have internet connection, I got "404 not found" from apt-get install, which mean it is connecting to somewhere that returns it
[02:16] <DasEi> shsek: just a modem or a firewalled router ?
[02:16] <shsek> DasEi, port 22 is already being forwareded to that machine
[02:17] <DasEi> shsek: I'll pm you
[02:17] <shsek> I'm connecting to it via SSH from outside the internal network
[02:17] <Zvezda> ok n00b question - I just installed Xubuntu and I want to access my Windows PC's shared files, over the network.  how do I do this?  The Windows PC has been sharing files for quite a while to the other PCs on my home network
[02:18] <bofh80> Zvezda: click on Places > Network. you should be able to find them in the windows network
[02:18] <KE1HA> Places>>Network, does the share show up there?
[02:18] <Zvezda> I clicked places, I don't see "Network"
[02:19] <bofh80> 4th from the bottom ?
[02:19] <Zvezda> not there
[02:19] <KE1HA> There's the first hurdle
[02:19] <Zvezda> :-(  what do I do?
[02:21] <Zvezda> what should I do?
[02:21] <Dr_Willis> xubuntu dosent use the same stuff as Gnome/ubuntu does.
[02:21] <bofh80> Zvezda: System > Administration > Package Manager - search for smbclient   see if it's installed
[02:21] <Dr_Willis> see the #xubuntu channel perhaps?
[02:22] <Dr_Willis> Zvezda:  theres various other 'access/mount window sshares' tools and methods one can use.    You can mount the shares via the command line if you really wanted to.
[02:22] <KE1HA> Zvezda, Oh, Xubuntu, yea, I dont think the network browser is installed by default, my bad.
[02:22] <bofh80> Dr_Willis: the network icon in places is there by default no ?
[02:22] <Dr_Willis> smbclient package will be needed in asny case
[02:22] <Zvezda> bofh88 its installed
[02:22] <Dr_Willis> bofh80:  i dont use xubuntu - i found it lacking...   I dont know if its file manager has teh feature or not.
[02:23] <Zvezda> I use Xubuntu
[02:23] <Tomwa> Hi guys!
[02:23] <Alan502> Hi, I've looked in system>monitors but the only refresh rate i can choose is 60hz. How can I choose a higher refresh rate? The reason why i wanna do that is because for some awkward reason green spots appear on my screen if the refresh rate is not above 60 (the green spots do not appear on windows xp)
[02:23] <Zvezda> cuz my PC is older
[02:23] <Zvezda> so what should I do now?  the SMBClient is there
[02:23] <KE1HA> Zvezda, Here ya go, try this: http://ubuntuforums.org/showthread.php?t=304131
[02:23] <Dr_Willis> Zvezda:  and what are its specs? ive ran ubuntu on rather low end machines just fine.
[02:23] <Tomwa> I need some help getting my ubuntu to install when you guys have the time
[02:23] <Dr_Willis> Zvezda:    I would ask in #xubuntu - there may be a trivial way of doing it.. Or read up and mouint the shares by hand.
[02:24] <bofh80> Zvezda: the other way is type into the address bar in nautilus smb:///servername/share   i think that's the right syntax
[02:24] <rebirth> DasEi: i ran dpkg, then i went into netroot and typed "service gdm restart" but it gave me a command not found
[02:24] <Aeronius> is there a log of GUI events?
[02:24] <KE1HA> bofh80, that will let you see the files, but not write or manage the directory
[02:24] <Dr_Willis> bofh80:  hes using XUBUNTU - that dosent have nautilus :)
[02:24] <Zvezda> yeah
[02:25] <Zvezda> I'm confused
[02:25] <lucitu> rebirth: just gdm will do
[02:25] <Zvezda> this guide isn't much help either, cuz I don't have the stuff it says
[02:25] <KE1HA> Zvezda, you dont have a network browser.
[02:25] <bofh80> doh :) X < lol.
[02:25] <Dr_Willis> Zvezda:  you need to learn what xubuntu's default file manager has for that samba feature.  Thats the whole issue. the doccs and guiodes are normally for UIbuntu.
[02:25] <Zvezda> lol
[02:25] <rebirth> lucitu: just type "gdm"?
[02:26] <KE1HA> Zvezda, Plan-B = Install Ubuntu :-)
[02:26] <biodegabriel> Hello! I'm getting this message "-bash: ./configure: /bin/sh: bad interpreter: Permission denied" How do I specify another interpreter? If anyone could give me a simple example, that would be great.
[02:26] <lucitu> rebirth: yes
[02:26] <crucialhoax> I cannot edit .mp3 tags in Rhythmbox, I get this error Unable to create tag-writing elements, any ideas?
[02:26] <Tomwa> ANyone here able to answer a question about my linux failing to initiate install
[02:26] <mek||malloc> Tomwa: If it's a kernel problem, the #linux channel would be a good bet.
[02:27] <bofh80> KE1HA: i can do everything that way, adding mounts to etc/fstab for these kinds of shares is a bad idea, i found these methods to it quickly
[02:27] <felipe__> tem alguem q fala portugues
[02:27] <Dr_Willis> Tomwa:  state the problem/question and see who can answer.
[02:27] <mek||malloc> Tomwa: But if the question has to do with an ubuntu distribution and you have a general idea what went wrong...
[02:27] <xangua> !pt > felipe_
[02:27] <xangua> !pt > felipe__
[02:28] <stnz> Hey, abusive op's on the loose
[02:28] <stnz> lol
[02:28] <bofh80> KE1HA: it's especially cool with nautilus because you can do the same with NFS changing SMB to NET
[02:28] <DasEi> rebirth: sry, was distracted , least the dpkg did the update fully and now are back on desktop ?
[02:28] <jdsbluedevl> hi, I've been having this big problem for two months now.  I have been unable to share my network connection to my Roku set-top box.  The forums have been basically useless.  Can anyone please help me?
[02:28] <felipe__> oi
[02:28] <rebirth> rebirth: back but still no ozone
[02:28] <Tomwa> The problem is after I choose "Install Ubuntu" or "Try Ubuntu" from the boot menu (I've tried booting from USB and CD and DVD) the screen goes black and my monitor hibernates. I assume it has a to do with video drivers?
[02:28] <KE1HA> bofh80, you said the Magic Word, Nautilus, it can network browse.
[02:28] <wow> how can i get aim for ubuntu?
[02:28] <chai0> my fresh install of ubuntu server with openssh is denying me permission to write to any folder (sftp) but i can gain commandline access through ssh. how can i get access to write to my /var/www?
[02:28] <xangua> Zvezda: for xubuntu specific you can try #xubuntu and there isn't really a big diference between resources usage from ubuntu gnome, you might want to try !lubuntu
[02:28] <Aeronius> *anyone* is there a log of GUI events?
[02:29] <mek||malloc> chai0: Access it as a sudo user?
[02:29] <mek||malloc> chai0: sudo emacs -nw /var/www/file-to-write.html
[02:30] <AshWatson> Hello
[02:30] <AshWatson> i need some serious ubuntu help
[02:30] <AshWatson> with grub
[02:30] <bofh80> KE1HA: yeah, having a share go down and the system become unresponsive because it's /etc/fstab mount is annoying as hell (reminds me of nt4) this my reluctant easy method
[02:30] <AshWatson> can anyone help me
[02:30] <mek||malloc> AshWatson: Did you try #grub ?
[02:30] <KE1HA> Easy method = Ubuntu :-)
[02:30] <AshWatson> oh erm didnt even know about that channel
[02:31] <bofh80> KE1HA: works in debian with autofs installed too .
[02:31] <mek||malloc> AshWatson: Ubuntu is a distribution, grub is a bootloader. I bet they know more than we do... Though you're welcome to ask here :o)
[02:31] <Tomwa> After I choose "Install Ubuntu" or "Try Ubuntu" from the boot menu (I've tried booting from USB and CD and DVD) the screen goes black and my monitor hibernates.
[02:31] <rebirth> DasEi: should i try entering "gdm" in netroot?
[02:31] <Aeronius> *anyone* is there a log of GUI events?
[02:31] <mek||malloc> Aeronius: There is an x error log
[02:31] <Dr_Willis> Tomwa:  and your video card/chipset is what exactly?
[02:32] <DasEi> rebirth: sudo reboot will do, too
[02:32] <mek||malloc> Aeronius: ~/.xsession-errors
[02:32] <Tomwa> Dr Willis: I have an ATI 5870
[02:32] <KE1HA> Tomwa, lots of possible reason fer that at the moment. Try using the ALT-ISO for initial install.
[02:32] <rebirth> DasEi: sorry, what's the next step?
[02:32] <jdsbluedevl> hi, I've been having this big problem for two months now.  I have been unable to share my network connection to my Roku set-top box.  The forums have been basically useless.  Can anyone please help me?
[02:32] <gimpy253> Ok, I was able to get GRUB to show me the menu and boot into recovery mode, but it still fails to boot.  It stops at the "ureadahead-other" part.  If I hit esc or del it switches to a screen which says Ubuntu and has four dots under it that change color.  Does this mean it is still trying to boot a GUI even in recovery mode?
[02:32] <chai0> mekllmalloc: emacs isn't found. is there a way to chmod it? i know that changes permissions, but i have no idea how to use it
[02:33] <Zvezda> hmmm
[02:33] <mek||malloc> chai0: Use whatever editor you want. Emacs is just my editor of choice. If you have little experience with GNU Linux, I'd suggest just using nano
[02:33] <mek||malloc> chai0: sudo nano /var/www/create-this-file.html
[02:33] <KE1HA> chai0, you need to sort out why you can't ssh. Is this your own server or a hosted server ?
[02:33] <Zvezda> is there anyway to upgrade my Xubuntu into Ubuntu without burning a CD again?
[02:33] <Aeronius> mek||malloc: OK...
[02:34] <h00k> Zvezda: you can install the ubuntu-desktop metapackage
[02:34] <xangua> Zvezda: sudo apt-get install ubuntu-desktop
[02:34] <KE1HA> Zvezda, Yeah, Boot Ubuntu LiveCD
[02:34] <KE1HA> LiveCD will ask you is you want to Upgrade.
[02:34] <Tomwa> KE1HA: Do you mean the text based installer?
[02:35] <KE1HA> Tomwa, well its sort of a Text base installer, still have menues and such, but it gets you around the GPU / chipset issues.
[02:36] <Tomwa> KE1HA: Alright thanks I'll try that
[02:36] <KE1HA> Just looke for the distro you want, amd64 or 1386, ubuntu-alternate-iso
[02:36] <nelson777> hello, in folder properties, how do I change the nautilus folder size unit to always show size in bytes instead of bytes/MB/GB ?
[02:36] <alvarezp> Anyone having problems with the numeric keypad?
[02:37] <crucialhoax> I cannot edit .mp3 tags in Rhythmbox, I get this error "Unable to create tag-writing elements", any ideas?
[02:37] <chai_> KEIHA: it's my own server at home
[02:38] <mek||malloc> crucialhoax: http://ubuntuforums.org/showthread.php?t=105613
[02:38] <DasEi> rebirth: that was just to force a complete upgrade ( the dpkg.. repair ..option),, no it's just about going back on desktop , ithere strt gdm or reboot
[02:38] <crucialhoax> mek||malloc: Ill check it out now. Thanks :) I googled the issue but only got bug reports that werent solved.
[02:39] <rebirth> DasEi: oh ok, i just did a hard reboot
[02:39] <Aeronius> mek||malloc: are you aware of any logs of normal GUI events?
[02:39] <jdsbluedevl> hi, I've been having this big problem for two months now.  I have been unable to share my network connection to my Roku set-top box.  The forums have been basically useless.  Can anyone please help me?
[02:39] <chai_> i'll come back later and ask, busy now. thanks for the help so far though this is the best channel!
[02:39] <synister> lol
[02:39] <mek||malloc> Aeronius: I'm sure there are other logs of X. When you say GUI, it all runs through x11. Do a google search for X11 error reports or error logs. I mentioned one... ~/.xsession-errors
[02:40] <blag> where do i go to do a packaging request?
[02:40] <KE1HA> blag, as in a feature or new .deb package to the repo's ?
[02:40] <xangua> blag: launchpad¿
[02:41] <KE1HA> yeah, short answer for either, Launchpad.
[02:41] <opij> does anyone know where i can get support for PC/OS Linux? (NOT PClinuxOS)
[02:41] <jdsbluedevl> chai_: dunno how you see that, I get zero support in here
[02:41] <synister> :p
[02:41] <jdsbluedevl> or in the forums, for that matter
[02:42] <synister> outdated forums
[02:42] <synister> lazy admins
[02:42] <synister> like on irc
[02:42] <mek||malloc> I'm going to ask a general question, feel free to point to channel abuse. Anyone know a good way to perform x forwarding over ssh (ssh  -Y) while piping the sound back from the destination machine to the client? I am trying to watch a movie which exists on computer 2 on machine 1, but specifically using the audio device from machine 1 (and not 2).
[02:42] <jdsbluedevl> synister: you know anything about Internet connection sharing and why the steps that should work with my computer don't?
[02:42] <coz_> mek||malloc,   if no one can answer here you may want to try the ##linux channel
[02:43] <synister> Can i say something?
[02:43] <synister> Do you have to share?
[02:43] <mek||malloc> Fair enough, I thought I'd ask here since I was already in the channel. Thanks, coz_
[02:43] <synister> YOu dont have two nics?
[02:43] <synister> a hub..
[02:43] <KE1HA> jdsbluedevl, if there both wireless, do an ad-hoc netowrk.
[02:43] <jdsbluedevl> synister: hub not allowed in university apartments
[02:43] <coz_> mek||malloc,   no problem... at times  ##linux has a broader base of knowledge across linux
[02:43] <synister> I dont share my connection, it rediculous
[02:43] <synister> I hear you
[02:44] <jdsbluedevl> KE1HA: neither are wireless routers
[02:44] <synister> lol
[02:44] <jdsbluedevl> has to go through the Ubuntu box
[02:44] <bofh80> mek||malloc: try freenx with nomachinenx client . it's enhanced X / XDMCP . it has options for what you want to <sound forwarding>
[02:44] <KE1HA> Ding, no joy there then im affraid :-)
[02:44] <synister> Does your school allow you to do what youre trying to do?
[02:44] <mek||malloc> bofh80: Thank you kindly!
[02:44] <mek||malloc> And thanks again coz_
[02:44] <KE1HA> jdsbluedevl, you dont need a wireless router for ad-hoc, that's what ad-hoc does
[02:44] <jdsbluedevl> synister: yeah, they allow Internet connection sharing through an intermediary computer, just not through a router
[02:45] <KE1HA> Uses one Wireless NIC to allow access to another wireless NIC
[02:45] <FloridaGuy> anyone useing D-Link DWA-125 wireless usb with rt2870 chip set
[02:45] <bofh80> mek||malloc: you can use the nomachinenx server itself too (all free but not source, and has concurrent usage limitations, which is way i suggest the freenx server)
[02:45] <synister> Youre on linux? I wouldnt have an idea
[02:45] <jdsbluedevl> KE1HA: wireless not allowed, university has its own wireless network
[02:45] <synister> Ya
[02:46] <synister> I guess you have to
[02:46] <jdsbluedevl> KE1HA: and that wireless network is 802.1X, which Roku does not support
[02:46] <KE1HA> so are these boxes in the same room / vacinity ?
[02:46] <jdsbluedevl> KE1HA: yes
[02:46] <KE1HA> and what part isn't working ? the NICs themselves, or the ICS function ?
[02:46] <jdsbluedevl> KE1HA: and I have a long enough Ethernet cable
[02:47] <jdsbluedevl> KE1HA: NICs work independently when connected to wall, but outgoing won't connect with Roku box
[02:47] <crucialhoax> mek||malloc: Thats not the problem. I converted some .mp4's to mp3's and those are the ones I cant edit, sorry for being vague
[02:48] <KE1HA> RoKu box, ok, im not up to speed on what that thing is
[02:48] <jdsbluedevl> KE1HA: that's the Netflix streaming box
[02:48] <Four2zero> does ubuntu come witha rdp access.
[02:48] <mek||malloc> crucialhoax: http://lifehacker.com/216010/call-for-help-convert-m4a-to-mp3-and-keep-tags-intact
[02:49] <KE1HA> I'd have to do a bit of reading on that jdsbluedevl to make sure I understand how it works.
[02:49] <mek||malloc> crucialhoax: This is supposedly a common problem in converting m4a and mp4 to mp3
[02:49] <bofh80> jdsbluedevl: what's been the result so far? has the netflix box recieved an IP address ?
[02:49] <Aeronius> mek||malloc: is there a log of normal events in the GUI?
[02:49] <mek||malloc> Aeronius: Really?
[02:49] <mek||malloc> Aeronius: Did you not read my past four or so comments?
[02:49] <KE1HA> But essentially, your wanting to share a service from one box "RoKu" to a standard installtion box ?
[02:49] <crucialhoax> mek||malloc, seems the programs listed were for Windows and it didnt provide much info
[02:49] <jdsbluedevl> bofh80: no, just says 0.0.0.0
[02:50] <mek||malloc> crucialhoax: I didn't read it too well to be honest.
[02:50] <mek||malloc> crucialhoax: I'll see if I can find anything
[02:50] <crucialhoax> mek||malloc, Its all good lol. I cant seem to find anything either.
[02:50] <jdsbluedevl> KE1HA: I want to share the connection from my Ubuntu to the Roku box
[02:50] <KE1HA> jdsbluedevl, on, straight ISC, no forward X or any of that?
[02:50] <bofh80> jdsbluedevl: what methods have you tried thus far ?
[02:50] <synister> GL jdsbluedevl
[02:51] <FloridaGuy> anyone useing D-Link DWA-125 wireless usb with rt2870 chip set ?    that has got it to work
[02:51] <Aeronius> mek||malloc: everything seemed to be in the context of errors, which is why I'm saying normal events...
[02:51] <jdsbluedevl> well, I tried to set the IPv4 on the outgoing card to "Share with other computers", but that won't connect
[02:51] <mek||malloc> crucialhoax: http://forums.mp3tag.de/lofiversion/index.php/t5123.html I read this through a bit. Take a look at it.
[02:52] <raevol> does anyone know how to tell if the dbe module is loading correctly for X? lucid with fglrx
[02:52] <jdsbluedevl> bofh80: doing that with incoming connection shuts off the connection from the wall
[02:52] <mek||malloc> I'm not that familiar with x, sorry Aeronius.
[02:52] <KE1HA> jdsbluedevl, and your not allowed to have a router or switch in the room either right ?
[02:52] <jdsbluedevl> KE1HA: right
[02:53] <KE1HA> jdsbluedevl, and you've went down the cross-over cable route ?
[02:53] <jdsbluedevl> KE1HA: no, not yet
[02:53] <crucialhoax> mek||malloc, Still nothing. I had some videos that were .mp4 and I converted them .mp3 and rhythmbox wont let me edit them
[02:54] <KE1HA> jdsbluedevl, with the limitations you put on this, that's the only way I can think, No Wireless, not Hub / Switch, only thing left is direct connection.
[02:55] <peepingtom> Does anyone know how painful Maverick's transition to Xorg server 1.9 is going to be?
[02:56] <KE1HA> jdsbluedevl, and a standard cat5e/6 is not gonna work,
[02:56] <jdsbluedevl> ok
[02:56] <DasEi> peepingtom: #ubuntu+1
[02:56] <peepingtom> many newer ethernet devices automatically detect where a crossover cable should be used instead of a straight-through though, especially gigabit devices
[02:57] <peepingtom> DasEi: Thanks!
[02:57] <bofh80> jdsbluedevl: apparently firestarter might have some options to setup ICS for you. if you go down the route of enabling ipforwarding , then you need a dhcp server running
[02:57] <jdsbluedevl> bof80: tried that
[02:57] <thune3> raevol: /var/log/Xorg.0.log will show if dbe is loaded, but i'm not sure how to verify it is functioning
[02:58] <KE1HA> peepingtom, but a standard nic cable wont work with direct connection, need to be a cross-over.
[02:58] <bofh80> jdsbluedevl: how new is your computer / netflix box btw ?
[02:58] <gimpy253> Ok, I was able to get GRUB to show me the menu and boot into recovery mode, but it still fails to boot.  It stops at the "ureadahead-other" part.  If I hit esc or del it switches to a screen which says Ubuntu and has four dots under it that change color.  Does this mean it is still trying to boot a GUI even in recovery mode?
[02:58] <jdsbluedevl> bofh80: and I don't know how to run a dhcp server.  every time I try I mess up
[02:58] <bofh80> jdsbluedevl: the newer network cards autosense (non)crossover just fine these days
[02:59] <jdsbluedevl> bofh80: computer is probably 6 years old (it has an Athlon 1800+ chip, and I bought it at a Goodwill computer store)
[02:59] <ChogyDan> any recommendations for a program to rip a cd?  sound-juicer is no good...
[02:59] <jdsbluedevl> Roku is from January
[02:59] <bofh80> ah, that probably won't. but the roku might do it for you. are you able to set static IP information on the netflix
[02:59] <jdsbluedevl> bofh80: funny thing is, it worked fine for a while back in 9.10, and then it just stopped working a month after I installed 10.04
[03:00] <bofh80> you want to check connectivity between the two first probably
[03:00] <bofh80> ohh
[03:00] <KE1HA> jdsbluedevl, not to mention, your gonna need 2x Lan ports on the Inet box, and a DHCP "server, which Im sure your Network admins are not going to like much.
[03:00] <bofh80> that's good to know,
[03:00] <raevol> thune3: yea looks like it is loading but not functioning :(
[03:00] <jonathan2> How would I go about setting up DHCP server and tightvncserver to start automatically on boot? I'm running Ubuntu Server
[03:00] <bofh80> jdsbluedevl: does this mean you managed the dhcp server ok last time ?
[03:01] <jdsbluedevl> bofh80: I didn't set up a dhcp server
[03:01] <bofh80> jdsbluedevl: then where did the netflix get it's IP ?
[03:01] <peepingtom> Can most devices use link-local connections or is that more of an avahi/zeroconf thing?
[03:01] <jdsbluedevl> from the normal ICS setup that Ubuntu had, which doesn't work anymore with my computer
[03:01] <peepingtom> jdsbluedevl: I missed the first part of your conversation, are you just trying to share an internet connection between 2 devices?
[03:01] <thune3> raevol: it's no substitute for vsyncing stuff. what are you trying to fix with it?
[03:02] <raevol> conky
[03:02] <jdsbluedevl> peepingtom: yes, and the two ways Ubuntu wants me to do it aren't working
[03:02] <FoxhoundZ> What happened to Ubuntu?
[03:02] <raevol> hmm, this forum post seems to indicate it might be a xinerama problem...
[03:02] <jonathan2> is anyone able to help me?
[03:02] <bofh80> peepingtom: he has to use his ubuntu to ICS a connection for his netflix box, but basically just enabling ICS .
[03:02] <mek||malloc> jonathan: Your init.d scripts
[03:02] <peepingtom> jdsbluedevl: you mean the method in network-manager were you use an ipv4 "link-local" connection?
[03:03] <KE1HA> But ICS or not the second bx still need an IP-Addy.
[03:03] <mek||malloc> jonathan2: Add it to your /etc/init.d/rc.local file
[03:03] <jdsbluedevl> peepingtom: link-local?  the wiki says "Shared to other computers"
[03:03] <KE1HA> And that has to come from some sort of DHCPD
[03:03] <KE1HA> be it the UNI's DHCPD or the UB-Box DHCPD
[03:04] <jonathan2> so just add the two commands that I use to start them?
[03:04] <bofh80> KE1HA: i never thought, but with his setup, ICS is probably relaying his DHCP requests
[03:04] <peepingtom> jdsbluedevl: Well I guess that way is easier actually. Can your netflix box be set up with a static IP or does it need to receive an IP automatically through DHCP?
[03:04] <KE1HA> and if you hang a DHCPD on a live Network,  without the IP tables set up properly, your gonna give out lots of IP addresses.
[03:04] <jdsbluedevl> peepingtom: dunno
[03:04] <mek||malloc> jonathan2: That is correct, though I suggest you copy the file to a backup like .rc.local just in case
[03:05] <reggi> hello people: I am trying to setup ICS from my vodafone 3G broadband from my laptop (gateway) to share using an 8 port switch. I am following the instructions on www.howtoforge.com. After saving my settings and running '/etc/init.d/dhcp3-server restart' I see a couple of red colored 'fail'. When I run 'tail -n 100 /var/log/syslog' I get the following output http://paste.ubuntu.com/476702/
[03:05] <jonathan2> thamks!
[03:05] <jdsbluedevl> peepingtom: if you're referring to plugging in from the wall, that connection is encrypted
[03:05] <KE1HA> Not to mention, hacking off the UBI admins.
[03:05] <KE1HA> UNI ..
[03:05] <reggi> It looks like there is a conflict with dhcp settings else where. How can I clear everything and start again?
[03:05] <crucialhoax> I cannot edit .mp3 tags in Rhythmbox, I get this error "Unable to create tag-writing elements", any ideas? The files were .mp4 I converted them t .mp3..
[03:05] <myke2> Who has a driver of rtl8192u?
[03:05] <KE1HA> and in order to do that, you need to make the INET connect box, basically into a router.
[03:06] <xxthink> ?
[03:06] <jdsbluedevl> as it is, I have to fix a problem I borked myself, when I removed older kernels and now the darn thing won't boot
[03:06] <jdsbluedevl> even with the newer kernels still installed
[03:06] <myke2> It's in linux-2.6.33 but not in 2.6.32
[03:06] <xxthink> Hi, I have installed the apache2 on ubuntu 10.04
[03:06] <jdsbluedevl> I guess that's what the live CD is for
[03:06] <mek||malloc> xxthink: Me too!
[03:06] <myke2> Compiling Linux Kernel is hard and complex
[03:06] <KE1HA> so it only gives out IP-Addy's to its on sub-net. Nuff said about server :-)
[03:06] <xxthink> but the /etc/apache2/http.conf file is empty
[03:07] <xxthink> I also installed the php model
[03:07] <ChogyDan> myke2: I have a ppa with .35
[03:07] <myke2> ?
[03:07] <myke2> rtl8192u?
[03:07] <mek||malloc> xxthink: It got moved since apache just had a httpd.conf
[03:07] <xxthink> but the apache2.conf doesn't contain any php
[03:07] <myke2> for ubuntu 10.04?
[03:07] <xxthink> yes
[03:07] <bofh80> myke2: if you consider reading and learning, hard and complex, then  yeah i guess so lol
[03:07] <Scunizi> xxthink: there are other conf files controlling apache.. read up on it.. they do different things.
[03:07] <annie> Hello again room. I was able to ssh/proxy just fine earlier. I wrote the tutorial as I repeated the steps, but now when I'm testing the tutorial I get a message when starting the ssh tunnel. bind: Address already in use and it cannot listen to port 8080. The tunnel is active, but I guess the server isn't listening on port 8080?
[03:07] <mek||malloc> xxthink: Why should it contain php? It's your apache config script...
[03:07] <mek||malloc> xxthink: Try #apache
[03:07] <xxthink> ok
[03:07] <ChogyDan> myke2: no, it is for maverick, but I am running it on 10.04 atm
[03:08] <xxthink> https://help.ubuntu.com/community/Git
[03:08] <myke2> Can I get the driver part of Linux by git?
[03:08] <codeforkjeff> hi, looking for some help installing ubuntu on an older machine...
[03:08] <xxthink> I follow these rules
[03:08] <reggi> hello people: I am trying to setup ICS from my vodafone 3G broadband from my laptop (gateway) to share using an 8 port switch. I am following the instructions on www.howtoforge.com. After saving my settings and running '/etc/init.d/dhcp3-server restart' I see a couple of red colored 'fail'. When I run 'tail -n 100 /var/log/syslog' I get the following output http://paste.ubuntu.com/476702/	
[03:08] <peepingtom> codeforkjeff: ask away!
[03:08] <reggi> It looks like there is a conflict with dhcp settings from when I tried to setup firestarter. Is there a way to clear everything related and start again?	Thanks for your help.
[03:08] <xxthink> but the php can't be handled well by apahce
[03:08] <FloodBot2> reggi: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[03:09] <mek||malloc> xxthink: You're going to make my brain explode.
[03:09] <myke2> Can I download part of code for driver rtl8192u by Git?
[03:09] <peepingtom> reggi: Have you tried the tutorial in ubuntu wiki? it uses network-manager and is normally pretty easy
[03:09] <codeforkjeff> i get "unrcoverable error" during the install, and it drops me to a desktop. i try to use fdisk /dev/hda but it says cant open the disk
[03:09] <chai_> ok so my home server will let me ssh to it and also will let me read files via sftp. but not write permissions. how can i change permissions? i have sudo
[03:09] <xxthink> mek||malloc: I will got to apahce channel
[03:10] <codeforkjeff> the machine is an athlon 1ghz, 40 gig drive; there's an existing ubuntu on it (ancient) that boots successfully
[03:10] <peepingtom> reggi: https://help.ubuntu.com/community/Internet/ConnectionSharing Try the network-manager method if you're using Ubuntu Desktop
[03:10] <KE1HA> reggi, best place to ask about server functions in in the ubuntu-server channel
[03:10] <peepingtom> codeforkjeff: Have you done an "integrity check" on the CD to make sure it was successfully burnt?
[03:10] <mek||malloc> myke2: Take a look at: https://answers.launchpad.net/ubuntu/+question/75454
[03:11] <mek||malloc> myke2: I didn't read it too carefully, but it looks like it addresses your problem.
[03:11] <thune3> crucialhoax: i see a bunch of bug reports and no solution, i would recommend trying another application for tagging, if possible
[03:11] <bofh80> jdsbluedevl: are you trying anything? are you able to set static IP information on the netflix box ?
[03:11] <codeforkjeff> ive used the cd recently for another install successfully. hmm. i'll try blowing air into the cd drive
[03:11] <jdsbluedevl> bofh80: not trying anything right now, computer had hard time booting, had to rescue GRUB
[03:12] <ChogyDan> myke2: also, if it is wireless, you may want to try compat-wireless
[03:12] <myke2> oh?backports-wireless-* I've installed.
[03:12] <reggi> hey thanks for responding peepingtom, I had gone through those setup details as well. my problem is that I think I have more tried to set dhcp 3 different ways and these settings are conflicting with each other. i'll take KE1HA's suggestion and check out the server channel. =)
[03:12] <annie> question... anyone know the command to restart sshd after editing the config? I don't wanna go back home to reboot my comp.
[03:13] <jdsbluedevl> bofh80: ok, computer back to working
[03:13] <bofh80> reggi: dhcp should only be reading from the one config file. have you checked the config in /etc itself ?
[03:13] <peepingtom> annie: sudo service ssh restart
[03:13] <annie> peepingtom: ty
[03:13] <Blue1> peepingtom: yup
[03:13] <jdsbluedevl> bofh80: as for setting up static IP on Netflix box, I don't think it'll ket me
[03:13] <jdsbluedevl> *let me
[03:13] <Blue1> no
[03:14] <myke2> Oh,It's my driver but I can't understand what he said
[03:14] <Blue1> peepingtom: wouldn't it be sudo service restart sshd
[03:14] <bofh80> jdsbluedevl: it would be strange for it not too . i would think. but i don't have any experience with those things
[03:14] <Blue1> not ssh?
[03:14] <myke2> The driver is the one which it can't be compiled in linux-2.6.32-21
[03:15] <Blue1> AGG
[03:15] <reggi> bofh80: that is good to hear then. you are referring to /etc/dhcpd.conf right? its just that I installed dhcp3 and it has it's own config file /etc/dhcp3/dhcpd.conf which is probably where the conflict is happening.
[03:15] <peepingtom> Blue1: Yes I thnk I might've typo'd there :D
[03:16] <Blue1> peepingtom: so did I
[03:16] <peepingtom> Annie: it's probably sudo service restart sshd
[03:16] <myke2> It seems that the new kernel of linux has rtl8192u
[03:16] <myke2> http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.33.y.git;a=tree;f=drivers/staging/rtl8192u;h=ece4f6d574eb957e2eff43cf82e822fd65f37b6d;hb=HEAD
[03:16] <annie> peepingtom: cool beans
[03:16] <myke2> but I can't get it!@
[03:17] <KE1HA> jdsbluedevl, Both boxes need an IP address, yes, how is the second box, the one hanging off your primary INET gettign its second IP address ?
[03:17] <jdsbluedevl> ok, gotta go
[03:17] <peepingtom> l0l
[03:18] <peepingtom> errort+
[03:18] <annie> peepingtom: restart is an unrecognized service... I switched the wording and sshd is an unrecognized service
[03:18] <rebirth> DasEi: fyi, i got the problem fixed!  i just installed Madfuload like it says here http://ubuntuforums.org/showthread.php?t=1475651
[03:18] <rebirth> DasEi: thanks a lot for your help, i think i learned a lot following your instructions
[03:19] <DasEi> np: rock da world , have fun
[03:19] <annie> If I'm sshing on port 8080, what else could be bound to that port? I'm getting a message saying Address already in use.
[03:19] <ChogyDan> !who | myke2
[03:19] <KE1HA> annie, its sudo sshd restart
[03:19] <peepingtom> annie: a proxy, or a web server from a trrent client or something
[03:19] <annie> KE1HA: it requires execution with an absolute path
[03:20] <KE1HA> /etc/sshd
[03:20] <ilovefairuz> annie: sudo netstat -naptl
[03:20] <myke2> !
[03:20] <annie> peepingtom: only my Firefox and ssh tunnel are open on my laptop
[03:20] <myke2> !(tab) howto?
[03:20] <robg> does anyone know if there is an issue with the xbmc repo? I am attempting to install on a fresh build I have added the packages and update but it is not showing any packages from them
[03:21] <bofh80> reggi: you could try renaming ..  sudo mv /etc/dhcpd.conf /etc/dhcpd.conf.old     then restart the service.  only dhcp2 is meant to read the older one
[03:21] <ChogyDan> myke2: for example, to type your name I hit 'm' 'y' 'tab'
[03:21] <peepingtom> annie: an absolute path? then try /usr/sbin/service restart sshd  . Is that what you meant?
[03:22] <Four2zero> hello all, i tried setting up ubuntu witha static ip and dns, now i cant get online with it. I did a restart and inserted the right address and subnet mask and dns, still no go.
[03:22] <reggi> thanks bofh80 i'll try your suggestion. I'm very close to getting this working :)
[03:22] <annie> ilovefairuz: http://pastebin.com/Z2gYV7LM
[03:23] <annie> peepingtom: I think so... it just asked for it... trying now
[03:23] <Guest97029> anyone knows how I can put in kopete for contatos be seen by E-Mail
[03:23] <sacarlson> Four2zero: pastebin your /etc/network/interfaces  and your /etc/resolve.conf files
[03:23] <Makuseru> I just got hdmi out working on my laptop (hp g60 with kubuntu 10.04, nvidia 8200m) but now i've got no sound over hdmi. How can i set the output device with alsamixer or anything like that? Right now it seems to be set to HDA Nvidia instead of the HDMI like it should be.
[03:23] <Guest97029> ??
[03:23] <Four2zero> alright.
[03:24] <Guest97029> ?
[03:24] <Guest97029> anyone knows how I can put in kopete for contatos be seen by E-Mail
[03:24] <ilovefairuz> annie: sshd is listening on 22, 8282 and 8080
[03:24] <sacarlson> Four2zero: oh and the results of ifconfig
[03:24] <KE1HA> 8080 ?
[03:24] <annie> ilovefairuz: yes
[03:24] <peepingtom> Makuseru: What video card do you use?
[03:24] <sacarlson> Four2zero: and the results of route
[03:24] <annie> KE1HA: 8080 a bad idea
[03:24] <AshWatson> can anyone help me with grub because noone is speaking in #grub
[03:24] <Guest97029> anyone knows how I can put in kopete for contatos be seen by E-Mail???????????''
[03:24] <TELL0> Guest97029, #kopete
[03:25] <Four2zero> k,
[03:25] <peepingtom> Makuseru: oh I see
[03:25] <Wiesshund> AshWatson i can try
[03:25] <peepingtom> Makuseru: 1 sec, Ill send a link
[03:25] <Makuseru> peepingtom: Alright, thank you.
[03:25] <AshWatson> Wiesshund, can i pm you
[03:25] <KE1HA> well, in the security world, first thing ya learn about sshd is to change form 22 ..this is a proxy setup your doing right ?
[03:26] <Guest97029> thank you
[03:26] <ilovefairuz> annie: so that's what's binding to the port, kill the tunnel and it will unbind
[03:26] <Wiesshund> AshWatson if you ask in the channel, more people will see what you need and someone may know right off what you need
[03:26] <TELL0> Guest97029, this is an ubuntu support channel, not for kopete. Kopete channel is #kopete
[03:26] <annie> KE1HA: yes
[03:26] <AshWatson> ok
[03:26] <AshWatson> well my problem =
[03:26] <KE1HA> annie, really, I think the guys & girls in the server channel are much better equipted to help you sort this out.
[03:26] <peepingtom> Makuseru: Have you checked the sound preferences window? Click the speaker icon on gnome-panel, go to preferences
[03:27] <TELL0> AshWatson, may I help you?
[03:27] <AshWatson> i installed ubuntu about 4 days ago and then did a load of upgrades including an upgrade for grub, wen i retstarted grub i got an error saying =
[03:27] <ChogyDan> what can I use to rip a cd?
[03:27] <AshWatson> error: no such device: (number + letters).
[03:27] <peepingtom> Makuseru: If your devices doesn't show up there, install this PPA: https://launchpad.net/~ubuntu-audio-dev/+archive/ppa and install the version of linux-alsa-driver-modules for your kernel. You can see your kernel version by typing "uname -a" in terminal.
[03:27] <AshWatson> grub rescue>_
[03:27] <AshWatson> and now i cant boot up in any os
[03:27] <ilovefairuz> AshWatson: did you install using wubi or a nomal install ?
[03:27] <AshWatson> i had windows on c drive and did have ubuntu on d drive
[03:28] <annie> ilovefairuz: Here is the command I used earlier to set up the ssh ... ssh -D 8080 -C user@server -p 8080
[03:28] <Makuseru> peepingtom: it shows up as HDA NVIDIA HDMI NVIDIA, but when i do a "test" on it, i get no sound.
[03:28] <AshWatson> but i formatted the d: drive an done acer erecovery on the c: drive
[03:28] <AshWatson> ilovefairuz, i did it from th windows installer off the ubuntu website
[03:29] <peepingtom> Makuseru: you've selected HDMI in the "output" tab, then?
[03:29] <ilovefairuz> AshWatson: ok that's "wubi", type ls and write what shows up
[03:29] <sacarlson> four2zero: might want to add lspci and lsusb then we should have everything I can think of
[03:30] <synister> Best linux FTP client
[03:30] <h00k> !best | synister
[03:30] <TELL0> AshWatson, see my PM
[03:30] <synister> lol
[03:30] <Makuseru> peepingtom: Im not sure, do you know where the "output" would be in kubuntu?
[03:30] <Wiesshund> ebil wubi
[03:30] <leonel> hola
[03:31] <leonel> alguien que hable español
[03:31] <leonel> ?
[03:31] <peepingtom> Makuseru: No, sorry! Those instructions were gnome-specific.
[03:31] <synister> can i delete n remote server and upload a file in one command?
[03:31] <four2zeroUbu> http://pastebin.com/tTijxKJZ
[03:31] <detrix42> How do I upgrade k3b to the 2.0 version.  I downloaded the source, but I dont have all the KDE files....
[03:31] <ilovefairuz> annie: restart the ssh service, sudo service sshd restart
[03:32] <four2zeroUbu> lspic: http://pastebin.com/PvWzc2q1
[03:32] <trapper_panda> having trouble with a laptop... the sound plays through the speakers even though i have headphones plugged in.  How can I fix it?
[03:32] <annie> ilovefairuz: sshd: unrecognized service
[03:32] <h00k> !es | leonel
[03:32] <Wiesshund> trapper_panda is it playing out the headphones as well or no?
[03:32] <four2zeroUbu> lsusb: http://pastebin.com/PY4hGSe1
[03:32] <sacarlson> four2zero: ok you don't have an entry in /etc/network/interfaces  so what static address did you want?
[03:33] <ilovefairuz> annie: ssh without d, sorry
[03:33] <trapper_panda> Wiesshund - Yes it does
[03:33] <AshWatson> ilovefairuz, sorry i was going toulet
[03:33] <AshWatson> when i type ls, what comes up is - (hd0)
[03:33] <ilovefairuz> AshWatson: type ls and write what shows up
[03:33] <bofh80> trapper_panda: if your lucky there's a 'switch' in the gnome volume control for it. be sure to go into properties and tick all the boxes for swtiches
[03:34] <Wiesshund> trapper_panda do you know if your sound hardware has discreet headphone as a feature?
[03:34] <annie> ilovefairuz: wait... I think I did something stupid. When changing users on the Ubuntu os, do all apps get transfered over? Do I need to install the ssh server on the new user?
[03:34] <ilovefairuz> AshWatson: only (hd0) ?
[03:34] <AshWatson> yes
[03:34] <sacarlson> four2zero: ok open the file /etc/network/interfaces with an editor and add these lines I give you
[03:34] <AshWatson> thats all
[03:34] <trapper_panda> wiesshund idk
[03:34] <ilovefairuz> annie: no you don't
[03:34] <bofh80> trapper_panda: sorry, it's all new for 10.04, some changes i haven't noticed
[03:35] <detrix42> How do I upgrade k3b to the 2.0 version.  I downloaded the source, but I dont have all the KDE files....
[03:35] <four2zeroUbu> okay.
[03:35] <trapper_panda> bofh80 im using 10.04
[03:35] <annie> ilovefairuz: kk.... so should I change the port the server is listening on?
[03:35] <Wiesshund> trapper_panda you may try looking in the sound control applet and see if you can tell it to output headphone. depending on the sound hardware it may or may not be able to switch the output
[03:36] <FloridaGuy> hows come on mirrors i can get 1mbps to 1.8 mbps download speeds on other distro's in ubuntu im averageing about 500 kbps
[03:36] <ilovefairuz> annie: preferably, yes
[03:36] <ilovefairuz> AshWatson: what's your windows partition ?
[03:37] <AshWatson> C: drive
[03:37] <KE1HA> FloridaGuy, zsync, rsync, wget and nttp are throttled on UB images
[03:37] <KE1HA> http*
[03:37] <ChogyDan> detrix42: what ubuntu are you using?
[03:37] <detrix42> Lucid  10.04
[03:37] <AshWatson> ilovefairuz, if u didnt get that its the C: Drive
[03:37] <FloridaGuy> KE1HA, not useing thows...im downloading an iso
[03:37] <trapper_panda> Wiesshund I do not see that in the applet. I clicked on the headphone icon. did not see the output to headphone option you were talking about.
[03:37] <bofh80> trapper_panda: you could check in alsamixer while i work out where the hell the swtiches have gone :S
[03:37] <ChogyDan> detrix42: so am I, and I seem to have k3b 2.0
[03:38] <KE1HA> FloridaGuy, how are you downloading it.
[03:38] <sacarlson> four2zero: I lost your address but heres a sample of what you want http://paste.ubuntu.com/476711/
[03:38] <detrix42> ChogyDan: I am about to install KDE so I can compile it.
[03:38] <ilovefairuz> AshWatson: ok type each one of these commands and tell me if there's an error: set root=(loop0)
[03:38] <ChogyDan> detrix42: it is already in the repos, just install it
[03:38] <trapper_panda> bofh80 I already checked the alsa mixer on the terminal and the gui. couldn't find n e thing
[03:39] <jeffmr> Can someone do me a favor and ask an administrator on efnet why I was dlined from their servers?
[03:39] <FloridaGuy> KE1HA, thru firefox.....mandriva i can get at most 2 mbps on this mire...ubuntu...im geting on average 400 to 500 kbps
[03:39] <KE1HA> FloridaGuy, if you right click to save, that's http, else, it's one of those other and ftp falls in the wget bucket fer throttling.
[03:39] <Wiesshund> trapper_panda in windows did you just plug in the headphones and it would auto sense the jack and cut the speakers off?
[03:39] <detrix42> ChogyDan: my synaptic package manager is only showing versioni 1.91.0
[03:39] <ilovefairuz> AshWatson: any errors?
[03:39] <AshWatson> ilovefairuz, could you pm me the commands
[03:40] <AshWatson> ilovefairuz, nope no error come up then
[03:40] <trapper_panda> Wiesshund that's right
[03:40] <detrix42> ChogyDan: I did to a reload of the repo lists.
[03:40] <KE1HA> FloridaGuy, http dl's along with the others i mentioned are throttled. Firefox, IE or whatever browser your using is http
[03:40] <FloridaGuy> KE1HA, its an http im downloading from
[03:40] <KE1HA> Yes
[03:40] <KE1HA> Well, no, that's the method actually.
[03:40] <ChogyDan> !info k3b lucid-backports | detrix42
[03:41] <FloridaGuy> KE1HA, so ubuntu's saying i cant have my full download speed
[03:41] <Wiesshund> trapper_panda could be that ubuntu's audio system is unable to fully make use of that function. I know i lack the windows ability to swap my jacks around etc
[03:41] <sacarlson> four2zero: you can change the address I have of 192.168.2.250 to that 192.168.0.X you wanted as your static address and change router to your gateway that I think is 192.168.0.1  or add that address in your in your /etc/hosts  with a line of router 192.168.0.1
[03:41] <KE1HA> FloridaGuy, your downloading from Ubuntu's CD Image site, through http
[03:41] <detrix42> ChogyDan: ahhh, I see, I did not have the backports enabled....thanks
[03:41] <trapper_panda> Wiesshund so does that mean that i'm screwed? or is there a way to fix this?  should I try reinstalling linux?
[03:42] <FloridaGuy> KE1HA, no...im downloading from...    http://mirror.cc.columbia.edu/pub
[03:42] <KE1HA> FloridaGuy, Ubuntu is saying, they want to controll the outflow to keep one person from overloading the DL server if the make a mistake or something and DL 20 at a time or something. Simplified answer but ya get the drift.
[03:42] <Wiesshund> FloridaGuy Ubuntu is saying "i have X total bandwidth, and your share is Y?
[03:42] <armysister> ?
[03:43] <annie> ilovefairuz: hope you don't think I'm hounding you, But I've changed the port I'm calling to 8282. but still get the same message. I ran netstat and I don't see anything on port 8080
[03:43] <Wiesshund> trapper_panda did it work in linux previously? or only under windows?
[03:43] <armysister> what is this
[03:43] <JustinTheTerribl> I need help configuring conky
[03:43] <KE1HA> FloridaGuy, then they have throttled it as well, allot of image sites do that, especially if here bandwidth limited.
[03:43] <FloridaGuy> im not downloading from ubuntu mirrors....just cant get my full download speed from other mirrors with ubuntu distro
[03:44] <FoolishOwl> I'm using 10.04, and I notice I don't have the "Ubuntu Partner Repositories" listed. I was looking at /etc/apt/sources.list, and it looks like it's a bit sloppy, with comments out of sync with its contents and so forth.
[03:44] <KE1HA> FloridaGuy, I'd recommedn another mirroe then.
[03:44] <Wiesshund> FloridaGuy mirros can have throttles too, per directory as well
[03:44] <trapper_panda> Wiesshund apparently only under windows. this is my friend's computer. I think it worked under Wubi.
[03:44] <xangua> FoolishOwl:  tried the !partner factoid¿
[03:44] <ilovefairuz> annie: pastebin: sudo netstat -plnt
[03:44] <KE1HA> The reasons are simple, to keep there severs from being crashed.
[03:44] <FoolishOwl> !partner
[03:45] <FloridaGuy> KE1HA, if you hurd..i said i get on average from this mirror about 2 mbps when useing other distro's...ubuntu isent leting get that...
[03:45] <robertd> have a question about xorg server
[03:45] <KE1HA> FloridaGuy, I read and understood it prefectly.
[03:45] <bofh80> trapper_panda: http://ubuntuforums.org/showthread.php?t=1226730   this shows what's missing from the volume controls. the switches are what we are after. i
[03:45] <Wiesshund> trapper_panda your probably going to have to check what the specific audio hardware is, to dig more into it. I cant say if its for sure a dead end yet
[03:45] <robertd> let me rephrase that
[03:46] <jpag87a> Hi, I have this problem: my computer starts beeping very loudly when shutting down, the snd_pcsp and pcspkr are already blacklisted in /etc/modprobe.d/blacklist.conf (the only solution I get when searching everywhere on the Web). This doesn't happen all the time, but I really need to get rid of the beeping, since it has happened at office and is very embarrasing (and will get me berated soon for sure). I'm using Ubuntu 9.10 (Linux 2.6.31-22-generic #61-Ub
[03:46] <annie> ilovefairuz: did you want that from the client or server?
[03:46] <thune3> FloridaGuy: i'd be happy if I got 500kbps consistently...but I do not sit around and watch my upgrades while I steam about low download speeds. If it got below 100kbps, i'd change mirrors.
[03:46] <FloridaGuy> my hole internet connection....inside of ubuntu 10.04 is at 1/2 of what it should be
[03:46] <ilovefairuz> annie: what machine are you getting the error on?
[03:46] <annie> ilovefairuz: I'm outside the network trying to ssh/proxy to the server
[03:46] <JustinTheTerribl> floridaguy all the time?
[03:46] <Wiesshund> bofh80 think pulseaudio control would help?
[03:47] <annie> ilovefairuz: I'm getting it on the client
[03:47] <FoolishOwl> xangua, thanks. I'm also wondering where I can find a good default sources.list. Is there a simple way to get that out of the relevant package?
[03:47] <robertd> ? about having xserver-xorg-video-radeon      installed  while using flgrx   can it cause problems?
[03:47] <trapper_panda> wiesshund hmmm..... thanks
[03:47] <JustinTheTerribl> FloridaGuy all the Time?
[03:47] <FloridaGuy> http://mirror.cc.columbia.edu/pub   ..... this mirror.... i get about 2 mbps downloading package useing mandriva...ubuntu distro isent giving me that
[03:47] <trapper_panda> bofh thanks i'm going to check it out. will this help out to fix the problem?
[03:48] <joe_gubat> I am having problem installing apache2, php4, mysql and phpmyadmin using the source packages...
[03:48] <Wiesshund> trapper_panda you might look at the pulseaudio controls (from software center) they have some extra options
[03:48] <robertd> let me know if you can't for legal reason answer
[03:48] <ilovefairuz> annie: on the client type: sudo killall ssh
[03:48] <RealOpty> anyone have advice on switching users from a shell script to execute a command?
[03:48] <robg> Hello, is anyone else having a problem updating 3rd party repositories?
[03:49] <sacarlson> joe_gubat: you mean with apt-get or synaptic you can't load apache2 and that other stuf?
[03:49] <FloridaGuy> JustinTheTerribl, sence i installed it today....every web page i open loads slow....
[03:49] <hylian> anyone know of a good port scanner, i want to see if ubuntu's vanilla firewall is doing the trick. is there an ubuntu program or somehting tomake sure my ports are stealthed?
[03:49] <AndrewMC> !details | robg
[03:49] <xangua> FoolishOwl: mmm maybe !sources ¿¿ main, restricted, universe and multiverse are default
[03:49] <ilovefairuz> annie: be aware that this will turn off the tunnel
[03:50] <Gimped> hylian: netstat, nmap, etc
[03:50] <joe_gubat>  sacarlson: using apt-get in php4
[03:50] <Guest97095> how can i set up remote desktop asking for user name and password
[03:50] <joe_gubat> that is why i use the source package
[03:50] <sacarlson> joe_gubat: and error is?
[03:50] <annie> ilovefairuz: that's fine.. I killed all ssh.... tried to open tunnel and got same error
[03:50] <pil> Hello everyone - I have a question about defragmenting my hard drive - is there any way or a program which can defragment my drives?
[03:51] <bofh80> trapper_panda: http://ubuntuforums.org/showpost.php?p=8282852&postcount=4   this is interesting - it's a direct fix on nvidia sound chip for your problem. easy enough to try
[03:51] <hylian> Gimped ill take a look at that thanx.
[03:51] <robg> I have added the xbmc repo on a fresh build of Lucid. I run apt-get update and there are no packages listed in the repository except the gnupg key
[03:51] <annie> ilovefairuz: -D 8080 binds firefox to port 8080, do I have to have the tunnel open before opening firefox?
[03:52] <ilovefairuz> annie: no firefox can't be bound to any ports, it just connects to them, pastebin from client: netstat plnt
[03:52] <FoolishOwl> xangua, thanks. It's just the sources.list file seems rather crufty, like it was edited by a series of scripts at successive distribution upgrades. And, generally, I'm curious what the best way is to get an original configuration file out of a package.
[03:52] <RealOpty> robg, try reloading the repositories
[03:52] <ilovefairuz> annie: sudo netstat -plnt
[03:52] <KE1HA> annie, just fyi, ssh or secure https should be on 443 not 8080
[03:53] <collabra> https://www.grc.com/default.htm  <------- hylian  ....   this is an online scanner ,... Go to 'shields up"
[03:53] <sacarlson> joe_gubat: what errors are you getting when you attempt to install php4 with apt-get install?
[03:53] <robg> RealOpty, you mean apt-get update? if so I tried that. I also removed it from source list and readded it incase it might be a typo or something
[03:53] <ilovefairuz> KE1HA: SSH is NOT SSL
[03:53] <RealOpty> robg, ok. i dont know then, sorry.
[03:53] <ilovefairuz> annie: KE1HA: they are unrelated
[03:53] <drew212> how would i debug a problem where i can get to grub, but when i try to boot, even in recovery mode, it shows up a mostly blank screen, with some green, blue and yellow pixels across the top, even in separate kernels
[03:53] <pil> Hello everyone - I have a question about defragmenting my hard drive - is there any way or a program which can defragment my drives?
[03:53] <KE1HA> biding SSH to 8080 isn't gonna work, but ok.
[03:54] <annie> ilovefairuz: http://pastebin.com/t8SStYDa    That's from the client, no tunnel open
[03:54] <ilovefairuz> KE1HA: as long has no other binary is bound to the port, yes it will work
[03:54] <drew212> ok
[03:54] <KE1HA> ok
[03:54] <JustinTheTerribl> can anyone help me with Conky
[03:54] <joe_gubat> : sacarlson - it says that the no longer available. something like that...
[03:54] <coz_> drew212,   mpt sure off hand ././.did you try the #grub channel?
[03:54] <Gimped> JustinTheTerribl: try #conky channel
[03:54] <sacarlson> joe_gubat: just install the newer one php5 or up
[03:55] <annie> KE1HA: it was working a few hours ago... I'm walking step by step through the tutorial I wrote, and now it's not working
[03:55] <drew212> no, grub boots and starts ubuntu fine, i should try booting with a super grub disk....
[03:55] <coz_> JustinTheTerribl,   I only used conky once  so I am not the one that can help ...sorry guy
[03:55] <maco> KE1HA: annie using ssh to make a SOCKSv5 proxy
[03:55] <annie> maco: exactly
[03:55] <pil> I guess everyone is so busy .. :(
[03:56] <joe_gubat> sacarlson: i want to...but my current website uses php4
[03:56] <ilovefairuz> annie: sshd (the openssh server) is bound to these ports on the CLIENT (why? perhaps you've mistakenly edited the config files on client not server) .. sudo service ssh stop ... or remove openssh-server at all from client
[03:56] <coz_> pil,   I didnt see your question
[03:56] <sacarlson> joe_gubat: you sure it won't work with php5?
[03:56] <Wiesshund> pil in general linux doesnt require defragging
[03:56] <bofh80> pil: no defrag no. thank goodness you don't need to defrag anymore :)
[03:57] <Wiesshund> pil and currently there isnt s stable "defragger" for ext4, aside from dd
[03:57] <coz_> pil,   ah defragging... well  although linux fragments  it doesn do it in the same way windows does...the files are written to the drive in an different fashion
[03:57] <annie> ilovefairuz: ohhhh... Dang.. Yeah. I was switching out the laptop because I'm going to use it as the server. KK... so edit my config files here to the default ports.
[03:57] <KE1HA> Yeah, I get the whole proxy thing. Not here to argue just think that's the wrong way to go, but stand corr on ssl / ssh.
[03:57] <pil> Wiesshund, bofh80: are you serious? No defragment is necessary?
[03:57] <joe_gubat> yes i have tried it... the cms wont load on php5
[03:57] <sacarlson> joe_gubat: try it if it fails with your site then worry about it
[03:57] <annie> I learn something every day I'm in this room
[03:57] <coz_> pil,  he is serious
[03:57] <pil> :) Thank God
[03:57] <pil> thanks alot
[03:57] <pil> :)
[03:58] <thune3> pil: the standard answer around here is that you don't need it. This is a function of not having defrag tools
[03:58] <DWarrior1> someone help me understand this poster: http://images.easyart.com/i/prints/lg/1/6/164339.jpg
[03:58] <sacarlson> joe_gubat:  ok what is cms?  maybe that's what we need to fix
[03:58] <joe_gubat> i am planning to migrate it to php5
[03:58] <Wiesshund> only time i see a baddly fragged drive in linux is when someone is using torrent to get large video files etc, and thats more a fault of the torrent app
[03:58] <pil> thune3: ok
[03:58] <coz_> pil,   also no need for anitvirus  and spyware utilites ..at least at the moment
[03:58] <DWarrior1> I can maybe see how the rock wins, but the tree?
[03:58] <joe_gubat> it is a customize cms...
[03:58] <pil> coz_: I hope it will stay that way :P
[03:58] <pil> :)
[03:58] <drew212> coz_: what if the SGD doesnt work?
[03:58] <thune3> pil: another standard answer, but malware can hit ubuntu as well
[03:59] <FoolishOwl> pil, I gather that creating a defragmentation utility has been on the Linux community's to-do list for ages. But, fragmentation isn't much of a problem, so it stays low on the to-do list.
[03:59] <sacarlson> joe_gubat: I don't know what cms is so guess can't help you there
[03:59] <coz_> drew212,   sgd?  I am bad at abreviations :)
[03:59] <ilovefairuz> annie: stop the server on the client, you don't need it for the proxy to work
[03:59] <drew212> coz_: super grub disk
[03:59] <drew212> its grub, on a disk...
[03:59] <pil> Foolish0wl: I got it thanks :)
[03:59] <coz_> drew212,  oh  ok... ah it should however to be sure about the procedures with grub2  I would go to the #grub channel
[04:00] <Wiesshund> Any OS can be hit by malware or virus, but linux is harder to target and the enduser usualy a bit more savvy. So people tend not to write viruses for it
[04:00] <annie> ilovefairuz: right. But after I get all this sorted, the client is gonna be the server. Long story.
[04:00] <synister> YOu dont need a FTP client, linux comes to with "Connect to server" built in
[04:00] <RenatoSilva> How to change grub2's fonts?
[04:00] <RenatoSilva> How to change grub2's fonts? bold, italic, family name etc
[04:00] <bofh80> Wiesshund: but that gap closes with cross platform browser plugins like flash and java etc . just as exploitable on any OS they run on
[04:00] <ilovefairuz> annie: ok but for the time being turn it off to not confuse yourself
[04:01] <coz_> RenatoSilva,  oooo  tough question for me to answer... I am still getting used to grub2 :)  but there are a ton of how to's online and you can go to the #grub channel
[04:01] <joe_gubat> do you have any idea in setting up LAMPhp4 using the source package?
[04:01] <drew212> coz_:  im pretty sure its a problem with my xorg.conf...
[04:01] <Wiesshund> pil if youve actualy fragmented a linux partition bad (its possible just unusual) you can defrag it perfectly with dd
[04:01] <annie> ilovefairuz: yeah... just have default port 22 open in confg file now...
[04:01] <Gimped> Wiesshund: also, linux gets security updates more frequently with new kernels and such
[04:01] <coz_> drew212,   still #grub channel may have some insights
[04:01] <RenatoSilva> coz_: google is a bad guy
[04:01] <drew212> coz_: ill check after SGD, thanks man =)
[04:01] <RenatoSilva> coz_: I guess that's impossible. Would not be surprised.
[04:02] <coz_> drew212,  no problem...let us know if you solve this ..the solution may be real helpful
[04:02] <pil> Wiesshund: Ok... I hope linux stays virusless OS for ages...
[04:02] <joe_gubat> sacarlson-do you have any idea in setting up LAMPhp4 using the source package?
[04:02] <thune3> Wiesshund: i'd be in for understanding how a dd defrag would work (as I don't believe it)
[04:02] <Wiesshund> bofh80 yes and no, depends on if you like logging in as root. id say normaly the worst you are going to do is ruin one users login, which is an easy fix
[04:02] <sacarlson> joe_gubat: if you need to compile that old stuf http://ubuntuforums.org/showthread.php?t=1329760
[04:02] <RenatoSilva> coz_: I just upgraded to grub2 but I liked the old font, I think it was just bolder
[04:03] <collabra> Wiesshund: me too.
[04:03] <joe_gubat> thanks
[04:03] <coz_> pil,  most of the viruses I have seen were on the server platform  ,,,, my nephew got one for his business... but  overall I doubt it will be much of an issue   you can go to the BlackHat security sight to see what has been going on in terms of security issues with linux
[04:03] <Wiesshund> thune3 easy, remember of course you need the space to dd, when you pick up files and write them to a new fresh location, they are laid down perfect and unfragmented
[04:03] <bofh80> Wiesshund: from one point of view, root yes, but most of these things are after user data, that's accessable just by running as the user . nothing stopping it dropping a bomb in the users dir and having it launch with gnome either etc. it's not far out of reach
[04:03] <coz_> pil,     http://www.blackhat.com/
[04:04] <collabra> Wiesshund: do you have a script handy?
[04:04] <Wiesshund> bofh80 that is true, no sys tem can ever be totaly secure against its owner.
[04:04] <annie> ilovefairuz: THANK YOU .... it's working now. SWEET. You have saved me so much headache!
[04:04] <pil> Wiesshund: I had a MacbookPro before I switched to ubuntu and the reason for switching to MacOS X because of there is no known viruses but the OS X bored me as hell... by the way the BlackHat you mean the channel here in freenode?
[04:04] <ilovefairuz> annie: you're welcome
[04:05] <coz_> pil,   that site can be difficult to maneauver in but worth the effort
[04:05] <RenatoSilva> coz_:thanks anyway
[04:05] <coz_> RenatoSilva,  sorry if I havent been much help
[04:05] <RenatoSilva> np
[04:05] <Wiesshund> pil actualy osX has more viri in existance than linux (which is still almost none)
[04:06] <sticky_> ?
[04:06] <sticky_> oops, sorry
[04:06] <Guest90239> I'm having a problem with getting tightvncserver to start at boot on ubuntu srver
[04:06] <pil> Wiesshund: why people write viruses in the first place - that I dont understand it really.. :P
[04:07] <JustinTheTerribl> because
[04:07] <sacarlson> Guest90239: I think you might have to have auto login set or it will have nothing to look at
[04:07] <collabra> pil: To prove to Bill Gates and the world that his software sucs.
[04:07] <JustinTheTerribl> exactly lol
[04:07] <Wiesshund> pil why do people steal murder and rape? same reasons really
[04:08] <annie> thanks again .... this room is awesome
[04:08] <robg> Hi guys added the xbmc repository and apt-get update return Ign on the team-xbmc and a bunch of multivers and restricted repositories. How do I get it to fetch those repos?
[04:08] <Guest90239> I created a file called local in /etc/init.d/ , made it executable, added the command tightvncserver -rfbport 5900 and then ran update-rc.d, but the vnc server doesnt start
[04:09] <pil> Wiesshund, collabra: that's exactly true - the human nature but in the case of Linux - we are the ones I guess to make the open source clean and trustworthy for us the geeks... :)
[04:09] <AndrewMC> off topic conversations to #ubuntu-offtopic please
[04:09] <sacarlson> robg: my guess is that the site is broken, it may return with time or you can find a mirror site with what you want
[04:09] <gimpy253> Why would recovery mode try to boot to a GUI?  Assuming that a screen which says Ubuntu and four dots which change color in 10.04 is the boot GUI.
[04:09] <Wiesshund> collabra eh but if you remember some of the first viruses, they were not OS dependant. technicaly they could kill a linux machine that was booted from floppies
[04:09] <Guest90239> can anyone help?
[04:09] <AndrewMC> !patience | Guest90239
[04:11] <collabra> Wiesshund: Well, tell me this,... would you rather use an operating system designed for themselves by 10 to 20 thousand programmers world-wide..... Or one man's failed vision?
[04:11] <sacarlson> Guest90239: I think you should have your system auto login to an account you want to vnc to and have your vnc start from your login account
[04:11] <biodegabriel> Hi, I can't seem to run 'configure' on my nginx source. I keep getting this message: "unable to execute ./configure: Permission denied" I've checked the permissions, they're set to 755. The ownership is fine too. Any clues? I've run out of ideas.
[04:11] <pil> take care guys and gals - I have to go back to my linux books to study a little bit more ... talk to you later - you all are great - thanks for being there all the time - I am full of emotions now... :)
[04:12] <Guest90239> tightvncserver doesnt run automatically when I log in manually either
[04:12] <sacarlson> Guest90239: no you have to setup the start in the account give a sleep time so that the account is up to vnc to
[04:13] <Wiesshund> collabra i use quite a few OS's frequently, and personaly have no issues with any of them. But im not the guy at bestbuy grabbing a box off the shelf going home and then clicking yes on every popup box i see just to get the non existant free porn ;)
[04:13] <Wiesshund> ok i lied, i hate lantastic
[04:14] <sacarlson> Guest90239:  I don't use tight vnc I just use the one that is installed standard and it has a gui to set it up
[04:14] <Guest90239> how would I do that?
[04:14] <collabra> Wiesshund: Well, I'm definitely not grabbing that box on the shelf..... lol.
[04:14] <Guest90239> I'm running ubuntu server with no GUI
[04:14] <synister> Any graphic designers in here?
[04:14] <sacarlson> Guest90239:  does it have to be tightvnc?
[04:15] <luofuhui> ????
[04:15] <sacarlson> Guest90239:  oh then you would need to setup a headless vnc
[04:16] <ipc> Any graphic designers in here?
[04:16] <collabra> Guest90239: Why don't you just use SSH?....
[04:16] <ilovefairuz> !ot | ipc
[04:16] <sacarlson> Guest90239: you could just install the ubuntu-desktop  or run headless
[04:17] <sacarlson> Guest90239: collabra:  good point why can't you just ssh in if it's just a server?
[04:17] <Guest90239> How will ssh differ from vnc?
[04:17] <Ameisen> Which is the best file system, speed-wise, for large numbers of small files
[04:18] <Ameisen> im talking tens of thousands of course files
[04:18] <Ameisen> source*&
[04:18] <collabra> Guest90239: TightVNC is for gui and graphics,... if you're just in a text environment,... ssh all the way.
[04:18] <sacarlson> Guest90239: well vnc is a graphical interface.  a server has no graphic xserver running.  you just ssh into a server into a shell
[04:18] <ilovefairuz> Guest90239: ssh is text-based (but you can use it to redirect X connection)
[04:18] <Wiesshund> VNC is for remote desktoping, gui and all that jazz. plain ssh is secure telnet for command line stuff
[04:18] <Guest90239> do I need a program for ssh? wiol it run at startup automatically?
[04:19] <lolmac404> is there any way i can access windows and linux remotely?
[04:19] <collabra> sudo apt-get install ssh
[04:19] <biodegabriel> Can anyone recommend a mirror for 'apt-get update' and 'apt-get upgrade'? My installation is messed up and I suspect it's the packages that were downloaded.
[04:19] <ilovefairuz> Guest90239: sudo apt-get install openssh-server
[04:19] <biodegabriel> I mean, a mirror for Ubuntu in general.
[04:19] <Wiesshund> Guest90239 server should have sshd running by default should it not?
[04:19] <sacarlson> Guest90239: the server has sshd already installed and running default on port 22
[04:19] <collabra> Guest90239: then open port 22 to the outside and then remote in....
[04:20] <Wiesshund> just type ssh serverip in term
[04:20] <collabra> Guest90239: there are a few security enhancements you can make,... but learning them is as easy as a google.
[04:20] <ilovefairuz> Ameisen: use ext4 it's speedy and well suited for heavy loads
[04:21] <_jesse_> lolmac404: ssh
[04:21] <Ameisen> my need is -very- specific
[04:21] <Ameisen> compiling/checking in/out huge numbers of source files
[04:21] <DasEi> Wiesshund: ssh not enabled in server by default
[04:21] <Ameisen> 5% improvement means a lot to me
[04:22] <ilovefairuz> Ameisen: nothing stable (on gnu/linux) currently matches ext4 speed-wise
[04:22] <Ameisen> someone suggested tuned XFS
[04:22] <collabra> Ameisen: what are they written in?
[04:22] <ilovefairuz> Ameisen: the only contender is btrfs and it's still under development
[04:22] <Ameisen> Java, C, C++, AIDL
[04:23] <collabra> Ameisen: wow,...not I, said the duck.
[04:23] <TheWorst> GNAA | www.klulz.com/listen.pls | IMPORTANT WEB RADIO SHOW ABOUT WAR ON APARTMENT ENTHUSIASTS | LIVE SHOW @ 10:00 CST 11:00 EST 8:00 PST | CALL IN # 504-613-0167
[04:24] <Ameisen> what?
[04:24] <Guest90239> Ok, so I installed ssh, will it run on startup?
[04:24] <meway> Hello why does file share not work?
[04:24] <reggi> War? Where?
[04:24] <ilovefairuz> Guest90239: yes it does
[04:24] <cheasee> can anybody tell me what to look at 120mm coolers if i need good cooling, regardless of noise? im looking how much m3 per hour it does, should i look at rpm info too or is that rather regardless?
[04:24] <collabra> Ameisen: I won't be able to help, In other words.
[04:24] <Ameisen> o
[04:24] <sacarlson> Guest90239: yes
[04:25] <Wiesshund> cheasee how much volume it moves, rpm is irrelevant
[04:25] <gp5st> how do i get the talk command to work?  I'm finding a lot of mixed search results
[04:25] <collabra> Ameisen: have you tried the c++, java or c .... channels?
[04:25] <DasEi> cheasee: ask in #hardware, noise, ballbearing, throughput
[04:25] <Guest90239> ok, thanks for your help.
[04:25] <cheasee> Wiesshund, DasEi, thank you very much :)
[04:25] <ilovefairuz> collabra: his question is about filesystems
[04:25] <mlmg317-himts> Hello.  Can someone quickly remind me again of the Terminal command for running a full system ClamAv scan?
[04:25] <Ameisen> collabra - why would I need their help?
[04:25] <cheasee> DasEi, hardware unable to join channel (invite only) ;)
[04:26] <ilovefairuz> !register > cheasee
[04:26] <DasEi> cheasee: see ilovefairuz
[04:26] <econdudeawesome> I love Curious George. Any good ubuntu backgrounds with him playing with the logo? ipc are you a graphics designer?
[04:26] <ilovefairuz> mlmg317-himts: to find the range of options for most commands type: man commandname
[04:27] <DasEi> cheasee: ##hardware, next to restired nick
[04:27] <ipc> Ya i need some help with a AD
[04:27] <RealOpty> anyone have advice on switching users from a shell script to execute a command?
[04:27] <collabra> Hey! Don't jump all over me, ilovefairuz,... help him out then.....
[04:27] <ilovefairuz> RealOpty: sudo -u
[04:28] <RealOpty> ilovefairuz, yes but how do i have the script pass the password?
[04:28] <coz_> mlmg317-himts, not sure  it may be   clamscan -r
[04:28] <ilovefairuz> collabra: I actually made a relevant suggestion. If you have none, try helping someone else.
[04:28] <coz_> mlmg317-himts,   I know that clamscan -r /home will scan home directory recursively
[04:28] <gp5st> RealOpty: expect?
[04:29] <Blue1> what the blazes is nepomuk?
[04:29] <collabra> ilovefairuz;   why don't you help me then....
[04:29] <collabra> ilovefairuz;  think you can,... I've got a great question...
[04:29] <coz_> Blue1,   http://nepomuk.semanticdesktop.org/xwiki/bin/view/Main1/
[04:29] <ilovefairuz> RealOpty: it's not supposed to pass the password!
[04:29] <ilovefairuz> !details | collabra
[04:30] <RealOpty> gp5st, ty ill look into that app
[04:30] <collabra> ilovefairuz: what's wrong with you?
[04:30] <Blue1> coz_: resource hog --
[04:30] <coz_> Blue1,  may well be
[04:30] <coz_> Blue1,   I dont believe i have it on edubuntu here but let me check
[04:30] <Blue1> coz_: i just nuked it --
[04:30] <coz_> Blue1,   oops  apparenlty I do :)
[04:30] <ilovefairuz> RealOpty: what are you trying to accomplish? also check: man setuid
[04:30] <Blue1> coz_: seems unnecessary
[04:31] <RealOpty> ilovefairuz, Well im making a munin plugin that will graph my GPU temp. but the nvidia app that grabs the temp only runs on the user that has controll of the X screen.
[04:31] <Blue1> coz_: http://en.wikipedia.org/wiki/NEPOMUK_%28framework%29
[04:31] <collabra> ilovefairuz: insult me again.... take time out of your busy day to write a script to me apologizing to me and the room for your arrogance
[04:31] <ilovefairuz> RealOpty: ok then, try setuid username commandhere
[04:32] <collabra> ass
[04:32] <gp5st> collabra: watch the lang
[04:32] <RealOpty> ilovefairuz, ty will try it
[04:32] <coz_> Blue1,  interesting
[04:32] <sacarlson> RealOpty: you might want to see the package cacti  it's cool for setup graphs of events
[04:32] <collabra> point made.... i'm through with him for now.
[04:32] <mlmg317-himts> coz_: yeah, I remember "clamscan -r".  So then what would I enter to in addition to "clamscan -r" if I wanted to scan the entire file system?
[04:32] <RealOpty> sacarlson, dont like cacti. too complicated to setup.
[04:33] <Blue1> coz_: 17 million euros?  I think somebody needs 16,999,999.99 in change
[04:33] <ipc> Well that was fucken retarded
[04:33] <RealOpty> sacarlson, munin is quite nice and runs on my embedded devices too
[04:33] <coz_> mlmg317-himts,   mm maybe  sudo clamscan -r
[04:34] <RealOpty> its not munins fault this dont work :\ just a nvidia thing :/
[04:34] <coz_> mlmg317-himts,  I believe there are both gtk and qt frontends for clamav as well
[04:34] <sacarlson> RealOpty: with cacti you have views of all your servers loads and events.  to each his own
[04:34] <Meway> whats wrong with this channel any ops on?
[04:34] <coz_> mlmg317-himts,  you could also try   man clamscan
[04:35] <Meway> cannot send to channel #ubuntu ...
[04:35] <RealOpty> sacarlson, ive used cacti. but now ive switched to munin :)
[04:35] <mlmg317-himts> coz_: Yeah - I have had troubles with GUI.  It will stall in the middle of full system scan - and never finish ...  I tried "man clamscan" - but didn't see a command listed for full sytem scan ...
[04:35] <xangua> !language > ipc
[04:35] <h00k> !language | ipc
[04:35] <ipc> Did i ask you to PM me
[04:36] <Ameisen> one that wins in benchmarks for compiling files is reiser4
[04:36] <xangua> Meway: what's wrong with what¿ we can see what you write
[04:36] <Tomwa> I'm having some problems during install. I can't tell which of my 2 smaller partitions is the empty one.
[04:36] <mlmg317-himts> coz_: what is the difference between "gtk" and "qt" frontends for clamscan?
[04:36] <Meway> xangua: I had to exit and come back in to say anything
[04:36] <Tomwa> I'd hate to overwrite my Windows partition lol
[04:36] <coz_> mlmg317-himts,    simply   gtk is for gnome and qt for kde
[04:36] <xangua> mlmg317-himts: that one uses gtk and the other qt jum...
[04:36] <Meway> if you guys have some kind of x words per min and I only said 3 things before it started doing that one of the ops is a moron
[04:37] <ipc> One, lol
[04:37] <tucemiux> Tomwa, sudo df -h
[04:37] <coz_> Meway,  sorry I guy  if you posted a question I missed it
[04:37] <mlmg317-himts> coz_: Hmmm.  What would "clamscan -l" do?
[04:37] <ipc> sudo -rm ops
[04:37] <ipc> doesnt work
[04:37] <coz_> mlmg317-himts,  good question  give it a try :)
[04:37] <bofh80> mlmg317-himts: is clam -r /home scans home then -r /  will scan the whole system in theory
[04:37] <Meway> it could be an issu on my end or something
[04:38] <coz_> mlmg317-himts,  did you look here  ?  https://help.ubuntu.com/community/ClamAV#Using%20ClamAV
[04:38] <Meway> lmao ipc
[04:38] <ipc> lol
[04:38] <Meway> coz_: well I asked if anyone knew about file sharing. what does ubuntu use for that? I cant seem to get it to share with a windows networok
[04:38] <coz_> mlmg317-himts,  oh!  try  sudo clamscan -r /
[04:38] <Meway> network*
[04:38] <Tomwa> tucemiux: I'm not gonna lie I have no idea what sudo -h means lol
[04:39] <Tomwa> I assume it's some kind of command line?
[04:39] <Meway> coz_ I think its somba having an issue but im about to find out
[04:39] <coz_> mlmg317-himts,  or  to show only infected files  try   sudo clamscan -r --bell -i /
[04:39] <sacarlson> Meway:  with windows we use samba
[04:39] <Meway> im googlings
[04:39] <Meway> sacarlson: thanks
[04:39] <bofh80> Tomwa: -h means help :) on all commands -h or --help
[04:40] <Tomwa> I'm using the alternate installer too to fix a driver/chip issue
[04:40] <Meway> sacarlson: is there any known reason somba might not work correctly with windows xp?
[04:40] <coz_> Meway,  oh ok...mmm darn I happen to be the "doof" of networking issues on this channel   sorry.. the thing is that many people are not here...rather the people who are here at the moemtn doing support may not have the answer right now
[04:40] <sacarlson> meway: I can't seem to get windows to share with ubuntu but I have no problem getting ubuntu to share with windows
[04:41] <coz_> Meway,   the other options I offer people is to try in the ##linux channel for some advice especially for networking but your question seems to be ubuntu specific so this wuould be the correct channel for that
[04:41] <coz_> mlmg317-himts,  that second command I gave you seems to be the one you want
[04:41] <coz_> mlmg317-himts,    sudo clamscan -r --bell -i /
[04:42] <ilovefairuz> Meway: write your question in detail and if anyone knows they'll help
[04:42] <Meway> I feel like a robot is talking to me
[04:42] <ipc> lol
[04:42] <Meway> ok ilovefairuz
[04:42] <Meway> ...
[04:42] <zerothis> I seem to be stuck between versions. Everything _says_ 10.04 but every thing _is_ 9.10 (mostly). Any apt install/update/upgrade wants to remove and add 1000s of packages but they all fail
[04:42] <ilovefairuz> !ops | for the second time volunteers here are being insulted
[04:42] <mlmg317-himts> bofh80: Yes - you were right.  I did also just bookmark the Ubuntu webpage mentioned by "coz_".  Exactly what I was looking for.  Thanks for all your help !!!
[04:42] <ipc> Thats why i swear, so you dont htink im a bot
[04:42] <bofh80> Tomwa: you should be able to mount and identify by loading the normal live cd and lookin in the System > Administration > partition editor
[04:42] <ipc> ;)
[04:42] <mlmg317-himts> coz_: Yes - you have provided me all the information I was looking for.  Thank you !!!
[04:43]  * ipc tap's his head
[04:43] <ipc> always thinkging
[04:43] <maco> ilovefairuz: what?
[04:43] <coz_> mlmg317-himts,  no problem..enjoy virus scanning at its best :)
[04:43] <Meway> I am having issues with file sharing ( pretty self explanitory) files are not showing up in the file share (windows side). The file is set up for filesharing (linux/ubuntu side)
[04:43]  * ipc pee's on maco
[04:43] <maco> ipc: you again?
[04:43] <ipc> lol
[04:43] <ilovefairuz> maco: scroll up and read ipc's, collabra's and Meway's messages
[04:43] <Meway> I have used file sharing before so I know im looking in the correct places
[04:44] <maco> ipc: how many times do you need to be told your language is unacceptable?
[04:44] <ipc> lol
[04:44] <coz_> Meway,  again just to have a cross / solution option   join ##linux channel as well
[04:44] <Blue1> Meway: follow the link here, might help.  http://pkill-9.com/wordpress/?p=309
[04:44] <ipc> ot | maco
[04:44] <ipc> danm
[04:44] <ilovefairuz> this is ridiculous
[04:44] <ipc> iloveu
[04:44] <bofh80> is pe3 even a word? :P
[04:44] <Blue1> bofh80: is pez a word?
[04:45] <bofh80> you aint getting me that easy
[04:45] <Meway> Blue1: thanks :) reading
[04:45] <Blue1> Meway: easiet way I know of - hope that helps
[04:46] <coz_> Meway,   looks like we woke some people up :)
[04:46] <sacarlson> Meway: this is my /etc/samba/smb.conf file I use that works for me to share with windows http://paste.ubuntu.com/476738/
[04:47] <sacarlson> coz_ all they have to do is ask
[04:47] <Meway> sacarlson: if all else fails I will try that
[04:47] <coz_> sacarlson,   this is so true
[04:47] <maco> Blue1: pez is a candy
[04:48] <Blue1> maco: but is it a name?
[04:48] <ZEKnox> what can be done do speed up X11 forwarding?
[04:48] <whompapotamus> Blue1: No more a name than "fo-shizzle"
[04:49] <ilovefairuz> ZEKnox: -C (for compression)
[04:49] <Blue1> whompapotamus: ;-p~
[04:49] <Meway> omg worst fail ever.
[04:49] <biodegabriel> Anyone know which compilers to use for Ubuntu 10.04? I  am trying to install NGINX and I keep getting permission and 'bad compiler' errors. I've reinstall about 8 times already... :(
[04:49] <ZEKnox> ilovefairuz: that alone makes it alot better?
[04:49] <coz_> biodegabriel,  gcc
[04:49] <biodegabriel> apt-get install gcc?
[04:49] <biodegabriel> any version?
[04:49] <ilovefairuz> ZEKnox: network performance-wise, yes
[04:49] <Meway> I forgot to install samba on this machine. I did it on the other one but forgot to on this machine >_<
[04:49] <coz_> biodegabriel,  it should be installed however   sudo apt-get install build-essential
[04:50] <biodegabriel> coz_ That's what I've been doing. My Ubuntu install is really bare. I'm on a cloud server.
[04:50] <ilovefairuz> biodegabriel: sudo apt-get install build-essential
[04:50] <ZEKnox> ilovefairuz: how do you feel about changing the encryption to blowfish?
[04:50] <coz_> biodegabriel,  mmmm
[04:50] <bofh80> ZEKnox: NX nomachine.com and freenx server (there is free server from nomachine but it has concurrent usage limitations) it's 'enhanced' X forwarding / XDMCP . it might suit your needs
[04:50] <biodegabriel> coz_ I've been using build-essential, but I think the problem is with pcre?
[04:51] <coz_> biodegabriel,  ooo   then I am not sure   gcc is the compiler you want to use
[04:51] <ZEKnox> bofh80: my laptop is out of the state, can I install that only ssh access
[04:51] <whompapotamus> ZEKnox: Yes
[04:51] <johny-b-goode> Hello People.
[04:51] <ZEKnox> whompapotamus:  bofh80  thank you guys for you suggestion, I may try that out
[04:52] <johny-b-goode> after a system update on netbuntu, mplayer doesn't play audio in movies.
[04:52] <coz_> ok guys... it is nearly midnight here ... i am tired  so I am off for the night... do well   ...be nice   night
[04:52] <biodegabriel> coz_ so if i do install gcc after 'build essential' will it replace the other one? Here's what I've been doing: http://pastie.org/1087545
[04:52] <ilovefairuz> ZEKnox: the major issue with X (and forwarding) most toolkits talk synchronously to the server (not async even though it's supported) and that hogs up the network, if you have capable machines crypto choices won't matter much
[04:52] <biodegabriel> coz_ don't worry about it. have a good night. :)
[04:53] <johny-b-goode> launching mplayer filename -ao alsa works tho.
[04:53] <biodegabriel> i'm ready to try another flavour of linux... :(
[04:53] <blag> i am apparently incapable of doing a packaging request on launchpad.  does anybody know the exact url for reporting a bug?
[04:53] <ZEKnox> ilovefairuz: good point.  I would normally setup better methods than X forwarding, but right now I'm in a jam and its the only option.  The laptop is out of state
[04:53] <naptastic> Is there a way that I can stop Ubuntu from making that damnable drumming sound when it first boots and displays the login screen?
[04:53] <whompapotamus> biodegabriel: Reason?
[04:53] <bofh80> ZEKnox: pop on freenx from the repos' and install the client from nomachine on your end .   oh freenx removed from repo's ? i swear it was there before
[04:53] <biodegabriel> whompapotamus, can't install nginx, tried about 20 times.
[04:54] <ilovefairuz> ZEKnox: the NX protocol (and it's Free implementations like neatx) offer the most bandwidth savings but they are more of a hassle to set up, X forwarding is simple and good enough
[04:54] <tonsofpcs> how do I make a machine fsck on reboot?
[04:54] <abhijit> Good Morning! :)
[04:54] <naptastic> biodegabriel, installing the build-essential package will install gcc. So if you then try to install gcc, you will find it already installed.
[04:55] <IdleOne> biodegabriel: sudo apt-get install nginx doesn't work?
[04:55] <tonsofpcs> the free implementations are more than 'a hassle' to set up, they're near impossible.  Video editing on linux is easier.
[04:55] <biodegabriel> i need to compile it for passenger, can i pass special arguments to 'apt-get'?
[04:55] <abhijit> !fsck | tonsofpcs
[04:55] <tonsofpcs> thanks abhijit
[04:55] <whompapotamus> biodegabriel: Download the source and built it yourself
[04:56] <four2zero_ubu> well i just figured it out....System>Preferences>Networking tool is a piece of crap..." why do they install useless tools that don't work.? Only way of getting my network online is by doing a simple command: sudo dhclient eth0
[04:56] <biodegabriel> tried that. still get 'bad compiler' and permission errors.
[04:56] <Tadpole_Jackson> I have a dell latitude d630 running the newest 64bit ubuntu, it has a docking station that contains a pci ati radeon 9250, i wish to hook this docking station to a television set. how well will ubuntu handle such a thing when i dock or undock the machine from the station?
[04:56] <biodegabriel> whompapotamus, doesn't matter which version either.
[04:56] <johny-b-goode> nevermind.
[04:56] <johny-b-goode> fixed that.
[04:56] <naptastic> Four2zero, did you try left-clicking the network icon in your system tray and clicking the interface you wanted to bring up?
[04:56] <naptastic> oops
[04:57] <naptastic> four2zero_ubu, did you try left-clicking the network icon in your system tray and clicking the interface you wanted to bring up?
[04:57] <biodegabriel> IdleOne whompapotamus, I basically use a clean install, download the source, and it won't "./configure"
[04:57] <sacarlson> four2zero_ubu: I thought you wanted a static address?
[04:57] <Enigmati1Coder> When a .deb file has dependencies, how do you list and install those dependent packages?
[04:57] <naptastic> biodegabriel, why does it fail to ./configure?
[04:57] <four2zero_ubu> naptastic yes, i tried that method after i used the manual command, but then it disconnected the wired eth0.
[04:57] <naptastic> biodegabriel, does it give you an error? What does it say?
[04:57] <whompapotamus> biodegabriel: Never really tried nginx - will have to someday - looks sweet
[04:57] <four2zero_ubu> sacarlson: i do.
[04:57] <biodegabriel> naptastic, it says http://pastie.org/1087553
[04:58] <naptastic> four2zero_ubu, ok. (I'm not much of a fan of NetworkManager either.)
[04:58] <four2zero_ubu> but its not working
[04:58] <biodegabriel> i looked at the permission, they're fine. executable and everything.
[04:58] <Enigmati1Coder> how about the owner
[04:58] <sacarlson> four2zero_ubu: so you didn't modify the /etc/network/interfaces file?
[04:58] <ilovefairuz> Tadpole_Jackson: only one way to truly know ...
[04:58] <Enigmati1Coder> When a .deb file has dependencies, how do you list and install those dependent packages?
[04:59] <biodegabriel> Enigmati1Coder, i did it both as root, and as admin, changed both permissions, nothing works.
[04:59] <whompapotamus> biodegabriel: So you are having permission issues - create a fakeroot environment and try to compile that way
[04:59] <biodegabriel> very mysterious
[04:59] <lolmac> how do i enable the delete confirmation when deleting a file? the rm -i isn't just supposed to be used in terminal?
[04:59] <naptastic> biodegabriel, it's probably complaining about the module you're trying to add. Did you try "sudo ./configure"?
[04:59] <abhijit> Enigmati1Coder, apt-get build-dep
[04:59] <ilovefairuz> Enigmati1Coder: sudo gdebi file.deb
[04:59] <biodegabriel> naptastic: yeah, i tried sudo, and it just says 'permission error'
[04:59] <Enigmati1Coder> ty both
[04:59] <Niglop> my speakers are making a constant 'eh eh eh eh eh' sound, what could be causing this?
[05:00] <Enigmati1Coder> ilovefairuz: to be sure, that will install them automatically?
[05:00] <biodegabriel> whompapotamus: i don't know how to do that.... could you explain? :)
[05:00] <four2zero_ubu> sacarlson: yes i did: http://pastebin.com/RJU3Tzz6
[05:00] <Tadpole_Jackson> ilovefairuz: i'm not going to bother bringing this docking station home if i don't know if it'll work
[05:00] <Tadpole_Jackson> somebody has got to use linux with docking stations
[05:00] <Tadpole_Jackson> somebody here
[05:00] <abhijit> wht is dockin g station? Tadpole_Jackson
[05:00] <biodegabriel> whompapotamus: or maybe i'll just google that.
[05:01] <naptastic> biodegabriel, have you tried ./configure without the options? (And where did you get those options? making the prefix anywhere in /opt is not a standard procedure.)
[05:01] <sacarlson> four2zero_ubu:  looks good so at reboot or restart network it should work
[05:01] <ilovefairuz> Enigmati1Coder: that works when you're trying to install a single .deb file and you want deps to be resolved and installed automatically, apt-get build-dep installs the packages that are need to BUID/compile the package, not run it
[05:01] <whompapotamus> biodegabriel: http://nixdoc.net/man-pages/Linux/fakeroot.1.html
[05:01] <biodegabriel> naptastic yup. no luck.
[05:01] <four2zero_ubu> will try brb, restart.
[05:01] <Blue1> wow -- they fixed 16,000 bugs in kde?
[05:02] <Niglop> my speakers are making a constant 'eh eh eh eh eh' sound, what could be causing this?
[05:02] <biodegabriel> whompapotamus:  so i would do  'fakeroot ./configure'?
[05:02] <ilovefairuz> Enigmati1Coder: what are you trying to accomplish?
[05:02] <naptastic> biodegabriel, that's bizarre. Was nginx intended for use with a different distribution?
[05:02] <biodegabriel> whompapotamus: naptastic still get "/usr/bin/fakeroot: ./configure: /bin/sh: bad interpreter: Permission denied"
[05:02] <naptastic> Niglop, no idea. sorry.
[05:03] <dontbuy> it's called the dark-heart mobo
[05:03] <dontbuy> asrock?
[05:03] <dontbuy> foxconn?
[05:04] <ilovefairuz> Niglop: probably a stuck music player or the flash plugin
[05:04] <Niglop> hmm
[05:04] <ilovefairuz> Niglop: close any browsers and any music/video applications
[05:04] <biodegabriel> whompapotamus, IdleOne naptastic:  it's really weird, cause everything else installs properly. only nginx doesn't want to install. i'll keep at it. Thanks for the tips you guys!
[05:04] <maco> Tadpole_Jackson: i suspect they work since i know some linux-only OEMs that sell machines with them, but its possible there are ones that dont, i guess...
[05:04] <AndrewMC> Niglop: Tried restarting??
[05:04] <lolmac> how do i enable the delete confirmation when deleting a file? the rm -i isn't just supposed to be used in terminal?
[05:05] <rebirth> does anyone know any linux software to transfer songs from an ipod touch to harddisk?
[05:05] <monokrome> Hi. I have no sound in OpenBox
[05:05] <biodegabriel> whompapotamus: IdleOne naptastic Does it matter that i did 'su - root' ? Is that not the same as logging in as root?
[05:05] <naptastic> biodegabriel, "su -" is the same as logging in as root.
[05:05] <monokrome> because alsa is defaulting to my Intel audio card, but I would like it to use my SoundBlaster XFi
[05:05] <ilovefairuz> lolmac: system > preferences > file management > behavior
[05:05] <biodegabriel> naptastic: OK
[05:05] <sacarlson> lolmac: I just sudo rm -r badfiles.*
[05:05] <Niglop> nop
[05:05] <Niglop> ill restart
[05:05] <monokrome> if I run alsamixer -c 2 it shows the alsa card, but alsamixer -D 2 says it's not available?
[05:06] <bofh80> monokrome: do you have both cards on for a reason? ie can't you disable the onboard one in the bios ?
[05:06] <ilovefairuz> !ipod > rebirth
[05:06] <ZEKnox> with 10.04 how do I crash X to get to the console?
[05:06] <monokrome> bofh80: I would rather not
[05:07] <monokrome> I use it for testing on one of my personal projects: http://github.com/monokrome/openal-source/
[05:07] <lolmac> ilovefairuz: does that work?
[05:07] <ilovefairuz> ZEKnox: why crash it? ctrl + alt + f2 to get a console and f7 to get X back
[05:07] <dooler> yes
[05:07] <dooler> it works
[05:08] <ilovefairuz> lolmac: there are preferences there to enable confirmations (but only in the gui file manager)
[05:08] <ZEKnox> ilovefairuz: i pressed those, and it didn't go to the console, my pc must be froze
[05:08] <lolmac> thanks
[05:08] <whompapotamus> biodegabriel: su means to switch user - you passed it root - you then are root
[05:08] <biodegabriel> whompapotamus: OK thx
[05:08] <litropy> peeps, what's the command for ubuntu's theme manager? ubuntu-netbook can't find it.
[05:08] <biodegabriel> whompapotamus: i'm going to try with karmic. lucid is maybe too cutting edge for nginx? LOL
[05:08] <rebirth> !ipod > rebirth
[05:08] <litropy> so i'll just use the command line, because I know it's there
[05:08] <litropy> !theme
[05:09] <lolmac> ilovefairuz: i think there is a bug, the option is available but it doesn't work
[05:09] <litropy> !theme-manager
[05:09] <lolmac> what file manager you use?
[05:09] <litropy> !ubuntu-theme
[05:09] <ilovefairuz> ZEKnox: ctrl + alt + print screen/sysreq key + k
[05:09]  * monokrome uses rox-filer
[05:09] <litropy> drats
[05:09] <litropy> what's it called!
[05:09] <bofh80> monokrome: i haven't looked for the latest versions, but changing the 'default' card usually requires editing the alsa conf . but with your programming skills and this setup i'd assume you'd know that?
[05:10] <ilovefairuz> lolmac: nautilus, how to you delete things?
[05:10] <litropy> baaaaah
[05:10] <monokrome> bofh80: Sure, but I don't know where those files are. There's no alsa files in /etc/
[05:10] <Niglop> kk i restarted my computer and it fixed it
[05:10] <lolmac> ilovefairuz: when i press delete it moves automatically the file to the trash
[05:10] <rebirth> ilovefairuz: what i'm looking to do isn't add music to my ipod, but go the other way and take music off of an ipod. i know there is windows software that does this but i don't know any on linux
[05:10] <lolmac> my keyboard is buggy so it deletes stuff automatically
[05:10] <ZEKnox> ilovefairuz: I already powered off the machine, but I will try that one next time, thanks
[05:10] <litropy> how do I run theme prefs!
[05:11] <litropy> !theme-panel
[05:11] <xangua> litropy: ¿
[05:11] <ilovefairuz> lolmac: this is not "delete" it's just moving to trash, press shit
[05:11] <ilovefairuz> lolmac: sorry, shift + del key
[05:11] <tonsofpcs> ugh, managed to somehow corrupt grub... booting with bt4 and fscking from there
[05:12] <litropy> k I'll ask later seeya guys
[05:12] <bofh80> monokrome: maybe in /etc/pulse :S . i'd hate this pulse thing lol. i don't quite understand if it's supposed to fully replace alsa
[05:13] <monokrome> bofh80: I immediately remove pulse audio after installing Ubuntu.
[05:13] <maco> bofh80: its a layer on top of alsa
[05:13] <monokrome> and it "wraps" alsa
[05:13] <maco> bofh80: pulse does not contain drivers. half of alsa is drivers. half is a set of over-engineered low-level libraries that application developers tend to use wrongly :P
[05:14] <bofh80> monokrome: /etc/modprobe.d/alsablah balh :)
[05:14] <tonsofpcs> meh, screwed up the whole thing... need to figure out how to clone one machine to the other
[05:14] <bofh80> i love synaptic
[05:14] <ilovefairuz> tonsofpcs: what's your issue with grub?
[05:14] <Niglop> how can I make xchat start at startup?
[05:14] <monokrome> bofh80: That just installs alsa manuals. It isn't where I set my default sound card.
[05:15] <tonsofpcs> ilovefairuz: i corrupted my SSD too much, there's nothing critical on this machine (an eeepc) and I have an exact harrdware match that has woring software, gonna just clone the ssd tomorrow (hopefully)
[05:15] <ilovefairuz> Niglop: system > preferences > start up applications
[05:15] <Niglop> ilovefairuz» what is the command for my shell script?
[05:15] <tonsofpcs> *working software
[05:15] <monokrome> s/manuals/modules/
[05:16] <bofh80> monokrome: you can see the drivers with the index numbers ?
[05:16] <ilovefairuz> Niglop: xchat
[05:16] <Niglop> ilovefairuz» just put 'xchat' in a shell script?
[05:16] <ilovefairuz> Niglop: no, i've told you where to add a program to start up, aren't you running gnome?
[05:17] <Niglop> no im not running gnom ilovefairuz
[05:17] <monokrome> bofh80: You mean the "sound-slot-##"?
[05:17] <Niglop> I have a script that runs my conky at start can I add xchat into it? ilovefairuz
[05:17] <ilovefairuz> Niglop: what are you running?
[05:17] <Niglop> ilovefairuz» xfce
[05:17] <dontbuy> it's better than lxde
[05:17] <monokrome> or the ones with index=-2?
[05:17] <naptastic> Is there a way that I can stop Ubuntu from making that damnable drumming sound when it first boots and displays the login screen?
[05:18] <chek> Hi, my server has been hacked somehow. I'm running 6.06LTS and the latest updates are on it. I'm aware it's a comlex topic but maybe someone can point me in the right direction.  I ran chkrootkit which came back negative. I guess it might have been some php exploit.
[05:18] <ilovefairuz> Niglop: check it's settings panel, i think it has a similar module
[05:18] <Niglop> ilovefairuz» I just want to know if I can add it to my conky script
[05:18] <bofh80> monokrome: if memory serves this index feature can control which sound card is loaded first, but you'll have to look up the details
[05:18] <ilovefairuz> Niglop: try: xchat &
[05:18] <chek> They injected in many index.php some iframe right after the body tag:
[05:18] <chek> <iframe src='http://SerFinWorld.com/spm1/' width='0' height='0' frameborder='0'></iframe>
[05:18] <Niglop> thnx ilovefairuz
[05:18] <monokrome> bofh80: Thanks
[05:18] <monokrome> I'll look into that
[05:19] <four2zero_ubu> well, when i restarted with static ip configured, network manager did see it as 192.168.0.122 connected successfully, but no websites could be found.
[05:19] <LinuxFetus> Hey what's the recommended PDF editor for Ubuntu?
[05:19] <ilovefairuz> chek: they probably exploited a php script
[05:19] <LinuxFetus> Oh, I'm using Ubuntu 10.04 LTS 32 bit, if that is relevant.
[05:20] <tim> hey I have a windows Vista computer I am trying to share files with Ubuntu 10.04 computer, I had them sharing at one point but I try to put the user name and password in on ubuntu and it doesn't let me in. is there something i'm missing?
[05:20] <LinuxFetus> tim: Are you connecting them via an Ethernet cable or what?
[05:20] <jasonwryan> LinuxFetus: I've used pdfedit - it was acceptable
[05:20] <four2zero_ubu> but when i changed via network connections, and selecting the IPv4 settings tab > Method back to Automatic addresses only, i am able to get online.
[05:21] <dontbuy> i can run them at once, both 32-bit and 64-bit
[05:21] <monokrome> bofh80: These index= values aren't related to the default card. The are for disabling certain modules from being used as the default.
[05:21] <four2zero_ubu> having dhcp give me an ip, rather than setting static ip.
[05:21] <bofh80> monokrome: right, so can't you do that for your intel card?
[05:21] <tim> LinuxFetus, linux fetus funny.... wireless network. I have all of my computers on the WORKGROUP
[05:21] <monokrome> bofh80: There's a proper way to do this :/ I should probably try #also though
[05:22] <ilovefairuz> chek: check the versions of any cms or forum software you're using
[05:22] <chek> i'll check silverstipe cms and a froum but is there any way to trace their entry point?
[05:23] <bofh80> monokrome: i don't understand why it's not proper, you don't want your intel card to be used as default, so you mark it up here as such. if you find a better way pls let me know :) it is something that crops up from time to time
[05:24] <monokrome> bofh80: Because that disables my intel card completely I think
[05:24] <bofh80> # Keep snd-pcsp from being loaded as first soundcard
[05:25] <bofh80> is the comment at the bottom. seems to be the right way
[05:25] <ilovefairuz> chek: most of this stuff is done by automated scripts now, so probably no one logged in at all, I suggest you restore a clean backup, and upgrade any software you have
[05:25] <monokrome> then I guess I just need to figure out what module the intel one is :/
[05:25] <sacarlson> four2zero_ubu: so at reboot it still fails to have your static address?
[05:26] <bofh80> monokrome: lsmod is a good start i guess
[05:26] <four2zero_ubu> yep, once i set the static ip, after reboot it will show in tray area wired connected but no online,
[05:26] <monokrome> true
[05:27] <LinuxFetus> jasonjang: Is it normal for PDFedit to constantly freeze?
[05:27] <sacarlson> four2zero_ubu: at that point what did route show?
[05:27] <jasonwryan> LinuxFetus: no - what does top show?
[05:27] <four2zero_ubu> sacarlson: i dont know !
[05:28] <four2zero_ubu> i think nothing.
[05:28] <LinuxFetus> jasonwryan: Top...?  Do you mean the menu bar?  Title bar?
[05:28] <bofh80> LinuxFetus: thanks for the LOL. seriously i laughed man. PDF = Adobe = Freeze lol. no seriously is it a  fresh document your doing or opening an exiting pdf
[05:28] <four2zero_ubu> but when i did ipconfig, it was configured properly.
[05:28] <four2zero_ubu> just like know.
[05:28] <four2zero_ubu> now
[05:28] <sacarlson> four2zero_ubu: I asume networkmanager is overwriting something at boot.  like your /etc/resolve.conf
[05:28] <jasonwryan> LinuxFetus: no, the command - it shows what's using your CPU...
[05:28] <four2zero_ubu> prob.
[05:29] <LinuxFetus> jasonwryan: Oh, do I type in "top" into the terminal?
[05:29] <jasonwryan> LinuxFetus: if pdfedit is misbehaving...
[05:29] <jasonwryan> LinuxFetus: yes
[05:29] <bofh80> resolv.conf will get overwritting periodically if dhcp is on, even if it's not used . LOLz .
[05:29] <LinuxFetus> bofh80: Yeah, it's an existing PDF... that was probably made by an automated process.
[05:29] <bofh80> LinuxFetus: try messing about with a fresh document to see if the same stuff starts happening
[05:30] <sacarlson> four2zero_ubu:  I just kill networkmanager when I setup a manual static conection
[05:30] <bofh80> you can also try copying the entire docuemtn into a fresh one
[05:30] <monokrome> bofh80: Alsa doesn't know about my XFi if I use options snd-hda-intel index=-2
[05:30] <bofh80> monokrome: oh wow, that's a turn up for the books. i've only seen this used for exact reason you are . lol
[05:30] <monokrome> bofh80: The annoying thing is that sound works in gnome but not in openbox
[05:31] <bofh80> monokrome: is openbox code maintained ?
[05:31] <four2zero_ubu> etc/resolv.conf: http://pastebin.com/2GEAitZ1
[05:31] <LinuxFetus> jasonwryan: I can't seem to copy the output of top into a pastebin.
[05:32] <bofh80> monokrome: ie, you sure it doesn't want OSS or something? there's an alsa-oss package
[05:32] <sacarlson> rour2zero_ub:  i use a script like this  http://paste.ubuntu.com/476753/
[05:32] <ilovefairuz> chek: to nullify the malware addresses inside php and html pages use (as root) :  grep -PRsil SerFinWorld  /path/to/phpfiles/  | xargs sed -i 's,SerFinWorld,,g'
[05:32] <monokrome> bofh80: Shouldn't matter. It's just a window manager.
[05:32] <LinuxFetus> jasonwryan: But pdfedit is taking up 98% of my CPU it says.
[05:32] <jasonwryan> LinuxFetus: no problem: is pdfedit in there?
[05:32] <bofh80> monokrome: wait, i'm off track a little, i take it you get sound output on your intel in openbox?
[05:32] <jasonwryan> LinuxFetus: well, Houston, we have a problem...
[05:33] <LinuxFetus> jasonwryan: Yeah it was listed (I just force quit-ed it).
[05:33] <whompapotamus> chek: Are you running apache?
[05:33] <monokrome> bofh80: Not sure. I'll check.
[05:33] <jasonwryan> LinuxFetus: apt-get remove pdfedit and try one of the others...
[05:33] <john38> can somebody help me
[05:33] <bofh80> ask away john38
[05:34] <john38> How do they make cds and dvds at factory cause when i burn it always has scratches
[05:34] <dontbuy> you mom told you to leave her house?
[05:34] <monokrome> bofh80: Nope
[05:34] <monokrome> hmm
[05:34] <john38> very light scratches
[05:34] <DasEi> check: or sanbox it in any way, least vm, better apache with patch
[05:34] <jasonwryan> LinuxFetus: http://www.ubuntugeek.com/list-of-pdf-editing-tools-for-ubuntu.html
[05:34] <dontbuy> this is so...
[05:35] <bofh80> john38: your dvd drive is faulty . . or very dirty  . . surely
[05:35] <marc__> hola?
[05:35] <monokrome> so I have no sound in openbox
[05:35] <monokrome> :|
[05:35] <ilovefairuz> !es | marc__
[05:35] <marc__> holaa?
[05:35] <bofh80> monokrome: it's a step up from screwing with alsa :D
[05:35] <bofh80> monokrome: try installing alsa-oss package / humour me :P
[05:35] <monokrome> it's installed
[05:35] <DasEi> john38: slightly ot , but there are (more expensive) cd's better protected against surface-errors
[05:35] <bofh80> oh
[05:36] <bofh80> strange then. hope it doesn't want esound eyy lol
[05:36] <monokrome> Shouldn't matter. I'm testing sound output with Pandora
[05:36] <john38> bofh80, im not saying its scratched up but almost visible light light scratches that maybe accompanies the burn process
[05:36] <john38> DasEi, i just bought verbatim dvds they are more clear than others
[05:37] <john38> DasEi, could that be it
[05:37] <bofh80> ok verbatim suck
[05:37] <john38> bofh80, verbatim suck your crazy
[05:37] <goten> metalbig
[05:37] <john38> bofh80, their that best ones
[05:37] <dontbuy> dvd/blu-ray has no future
[05:37] <bofh80> try datawrite titanium or something similar
[05:37] <dontbuy> everybody uses a 1 or 2 tb hdd
[05:37] <Michael13guy> is this the channel for help lol ima nub
[05:37] <whompapotamus> Imation all the way!
[05:37] <john38> bofh80, whats that
[05:37] <ilovefairuz> !details | Michael13guy
[05:38] <goten> how to set home parameter to your JVM parameters
[05:38] <maco> Michael13guy: yes this is the place to get help
[05:38] <Michael13guy> well i have a problem with getting my mic to work with skype lol
[05:38] <control_> What is the easiest ftp server for ubuntu server to setup and use?  GUI!
[05:38] <LinuxFetus> jasonwryan: I'm fairly certain that a human being did not make the PDF file.  It's a sheet music file for my band and I'm pretty sure the leader has a program which allows him to specify a key and then it generates the file... And my knowledge of files made like that tell me that 1) there's usually a lot of overhead (think of exporting a Word document as an HTML file in Word) and 2) may have some measures to keep from editing it -- I
[05:38] <LinuxFetus> 'm just trying to write some notes on it :/  I could always open it in GIMP, I guess... I just figured editing a PDF would be less memory intensive....
[05:38] <maco> john38: think you could stay on topic a bit better?
[05:38] <DasEi> john38: as said, not ubuntu-related, but you can google for cd's with extra-protection for special purposes like long-term backups, they have specialized ones concerning mechanical/optical ((sun)) resistance
[05:38] <maco> control_: gui? servers arent guis...
[05:38] <jaybird> #ubuntu-helpteam
[05:38] <control_> GUI to control it
[05:38] <maco> oh.... er..
[05:39] <control_> or setup the configue
[05:39] <control_> config*
[05:39] <maco> control_: ive never heard of using a gui to configure an ftp server, but there are GUIs for using ftp...
[05:39] <john38> DasEi, ok so what is the best datawritten titanium?
[05:39] <control_> like gadmin...
[05:39] <john38> Maco, sorry
[05:39] <jasonwryan> LinuxFetus: there is DRM for some pdf files: that could be the source of your problems...
[05:39] <control_> so if i install any ftp server i HAVE to edit text files for users and config etc?
[05:39] <whompapotamus> control_: I you need GUI - get webmin
[05:39] <Michael13guy> anyone help me with getting my mic to work with skype please lol
[05:40] <control_> webmin?
[05:40] <maco> control_: believe so...
[05:40] <bofh80> john38: please stop asking in this channel, you might get in trouble, datawrite is the brand, titanium is one of their ranges. best on the market for a decent price
[05:40] <ilovefairuz> !sound > Michael13guy
[05:40] <whompapotamus> control_: Vsftp is the best
[05:40] <maco> control_: webmin's not supported on ubuntu
[05:40] <control_> ok
[05:40] <control_> so vsftp it is?
[05:40] <goten> can anyone tel me how to set home parameter to my JVM parameters
[05:40] <maco> whompapotamus: what makes it best? i see references to it on redhat stuff, but i always jsut use the ftp server thats built into openssh-server
[05:40] <john38> bofh80, ok thanks i'll leave
[05:40] <maco> !webmin
[05:41] <control_> ok so i install it through ubuntu software center and then do ???
[05:41] <maco> !ebox | control_ this is the closest thing to webmin we have
[05:41] <LinuxFetus> jasonwryan: You're probably right; I will try the GIMP route...
[05:41] <control_> omg, so vsftp OR this ebox thing?
[05:41] <jasonwryan> LinuxFetus: good luck!
[05:41] <maco> control_: ebox isnt an ftp server
[05:41] <whompapotamus> maco: It's very flexible - all cli though
[05:41] <maco> control_: ebox is a configuration tool
[05:42] <goten> How to compile and deploy Unicorn on ubuntu 10.04
[05:42] <control_> config tool for a ftp server?
[05:42] <monokrome> bofh80: I tried a .asoundrc file, like so: http://dpaste.com/227852/
[05:42] <maco> control_: i use openssh-server to get sftp going.  the config file is pretty straightforward, in my opinion
[05:42] <rtfm> anybody from brazil?
[05:42] <maco> control_: config tool for "stuff"... i dont know what stuff. you asked about webmin, and i said ebox is the closest thing we have to webmin
[05:42] <ilovefairuz> !br | Guest99877
[05:42] <bofh80> monokrome: omg that's so simple
[05:42] <control_> no i asked what is the easiest ftp server to setup in ubuntu server
[05:43] <maco> control_: and then you asked about webmin...
[05:43] <control_> because someone said it when i asked for a ftp
[05:43] <control_> omg
[05:43] <control_> 5 different people said 5 diff things
[05:43] <monokrome> bofh80: Well, it doesn't work because there's no /etc/asound.conf and that's where you usually put it for alsa when it's not set up per-user
[05:43] <ilovefairuz> control_: that's the case with gnu/linux, so many options, try each and pick whatever works for you
[05:44] <bofh80> control_: then i will second vsftp install it then edit /etc/vsftpd.conf and read the comments to enable what you need
[05:44] <maco> control_: okfine.... vsftpd and openssh-server are probably the most common ones, and probably for good reason
[05:44] <bofh80> monokrome: another ubuntu special : P
[05:44] <control_> ok i just installed vsftp, i have to now edit the .conf file and boom restart and it works?
[05:44] <maco> (i never really figured out why i should bother with vsftpd when the openssh one is already there...)
[05:44] <maco> control_: should be it
[05:45] <control_> openssh one is where?
[05:45] <monokrome> so where is Ubuntu's asound.conf?!
[05:45] <bofh80> control_: yes, especially note the options about anonymous access and LOcal User access
[05:45] <monokrome> and why doesn't alsa-utils come with half the utils
[05:45] <control_> i installed ubuntu server with lamp
[05:45] <maco> control_: if you're using ubuntu server, openssh-server is part of the default install, i think
[05:45] <maco> control_: that gets you both sshd and sftpd
[05:46] <saravan> hi i have installed vlc media player fr ubuntu 9.10 but its not visible any where in the system
[05:46] <DasEi> john38: join #ubuntu-offtopic ?
[05:46] <control_> ok so how do i set it up to work?
[05:46] <control_> is there a control panel for that?
[05:46] <whompapotamus> maco: Vsftp is a bear to configure but does straight FTP the best - manage users without having to create shell access (or users without shell access)
[05:46] <bofh80> there's also this monokrome (Doesn't look much use) - /usr/share/alsa-base/alsa.default
[05:46] <maco> whompapotamus: if control_ is asking for the *easiest* and vsftpd is "a bear to configure" then why suggest it?
[05:47] <control_> lol
[05:47] <whompapotamus> maco: Webmin makes it a breeze - not sure about box
[05:47] <whompapotamus> Ebox
[05:47] <maco> whompapotamus: webmin also breaks ubuntu's config files
[05:47] <abhijit> saravan, can you run it from terminal by typing vlc?
[05:48] <control_> but someone said webmin isnt supported
[05:48] <saravan> abhijit, sure give me two seconds
[05:49] <Stale_> Hello everbody, what is the most stable ubuntu version?
[05:49] <saravan> abhijit, VLC media player 1.0.2 Goldeneye
[05:49] <maco> control_: which is why its not supported ;-) because of breaking config files
[05:49] <saravan> [0x9755d98] main interface error: no interface module matched "screensaver,none"
[05:49] <saravan> [0x9755d98] main interface error: no suitable interface module
[05:49] <saravan> [0x96c93e8] main libvlc error: interface "screensaver,none" initialization failed
[05:49] <bofh80> control_: sudo gedit /etc/vsftpd.conf and the ssh server is working out of the box but you can configure it. again they suggested this ebox for easy config, but i have no knowledge of it
[05:49]  * maco grrrrs at bandwidth
[05:49] <saravan> [0x96c93e8] main libvlc error: option drawable-xid does not exist
[05:49] <FloodBot2> saravan: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[05:49] <saravan> [0x9759a28] main interface error: no interface module matched "globalhotkeys,none"
[05:49] <whompapotamus> control_: Correct - just learned that tonight (run slackware but provide support for new users fro time to time)
[05:49] <maco> !paste | saravan
[05:49] <monokrome> bofh80: I think this should fix it. http://dpaste.com/227854/
[05:49] <s_fox> is there any message about 10.10?
[05:49] <maco> control_: im trying to view my config on my server...but lag is being annoying...hang on
[05:50] <abhijit> saravan, try reinstalling it first do sudo apt-get remove --purge vlc and then sudo apt-get install vlc
[05:50] <monokrome> bofh80: Yep. That fixed it.
[05:50] <adam45g> Downloaded Chrome x64 from there site (for the built in flash goodness) and the built in flash doesn't work :o
[05:50] <bofh80> monokrome: ahh back to the alsabase? eek. restarting alsa should do it. no need to reboot ??
[05:50] <bofh80> nice
[05:50] <monokrome> Yep. Restarting alsa fixed it.
[05:50] <monokrome> It wasn't even loading the XFi module
[05:51] <Stale_> Do anyone knows a link to all (stable) versions of Ubuntu installers?
[05:51] <adam45g> Anyone tried Chrome (not chromium) in x64 and found a way to make the built in flash work?
[05:51] <saravan> abhijit, its showing vlc not installed
[05:51] <bofh80> i'll try to remember how that works . 0 is 1, 1 is 2 . love programmers logic
[05:51] <abhijit> saravan, then install it sudo apt-get install vlc
[05:51] <enav> hi i need information about google maildrive on ubuntu pleas
[05:51] <bofh80> same as the network cards i guess heh
[05:52] <control_> ok i just edited the /etc/vsftpd.conf file...and saved it under sudo....now how do i add users?
[05:52] <saravan> abhijit, command not found
[05:52] <maco> control_: sudo adduser username
[05:52] <control_> just in a regular terminal?
[05:52] <abhijit> saravan, which versino of ubuntu you are using?
[05:52] <bofh80> yup
[05:53] <control_> the user control already exists...
[05:53] <Stale_> "username" is where you name the account.
[05:53] <bofh80> lol
[05:53] <whompapotamus> control_: Make sure you pass the no shell flag
[05:53] <maco> control_: thatd be because you're it ;-)
[05:53] <control_> well...that was easy then
[05:53] <maco> control_: you just need to tell vsftpd that you are a valid user
[05:53] <DasEi> Stale_: best can be a poll, but jaunty,karmic,lucid do all fine, and are , due to time being up , more or less de-bugged,  but concerning new features an speed, the other way around
[05:54] <control_> ok so how do i change home folder and crap
[05:54] <maco> control_: though i suspect it defaults to allowing all non-system users... because defaulting to a whitelist would be rather annoying
[05:54] <monokrome> bofh80: Now for the big test. I just rebooted :|
[05:54] <saravan> abhijit, 9.10
[05:54] <monokrome> Yep. Still works :)
[05:54] <DasEi> Stale_: which purpose ?
[05:54]  * monokrome can watch the IT Crowd happily now!
[05:54] <Michael13guy> how do i pull up the sound settings for xubuntu not ubuntu
[05:54] <bofh80> control_: if you enabled local users in the config and restarted the server !  then you should already be able to ftp as yourself, it's a nice test to check it's working
[05:54] <bofh80> monokrome: eek
[05:55] <abhijit> saravan, then go to applications>software center> and search for term vlc then you can see vlc click on install
[05:55] <control_> I am able to login
[05:55] <maco> control_: users' home directories are listed in /etc/passwd
[05:55] <control_> but I want the home folder NOT to be on the servers main disk
[05:55] <bofh80> monokrome: nice.
[05:55] <maco> control_: oh you want to move /home to a different hard drive?
[05:55] <control_> yes
[05:55] <DasEi> control_: no prob
[05:55] <control_> this is jus a file server
[05:55] <control_> dont want ftp access to the server, just the HD with my files
[05:56] <maco> control_: in that case, you need to put in /etc/fstab the disk/partition on which you do want /home to reside, and migrate the dat
[05:56] <maco> *data
[05:56] <maco> control_: wait what?
[05:56] <Stale_> DasEi: The most stable Ubuntu version as in it will work for most computer machines. I see that Dell PCs hate Linux OS installations.
[05:56] <control_> migrate dat?
[05:56] <DasEi> control_: attach seperate disk, make a dir /home, copy files over if any,  correct fstab, there you go
[05:56] <monokrome> Thanks for your help, bofh80
[05:56] <bofh80> maco: spit out the command to change a users home dir pls :)
[05:56] <control_> what? lol
[05:56] <saravan> abhijit, download started dude
[05:57] <abhijit> saravan, good
[05:57] <bofh80> monokrome: no problem, have fun :)
[05:57] <maco> bofh80: sudo usermod -d $dir  username
[05:57] <DasEi> Stale_: not right in this general way, dell comes with ubuntu preinsatlled in cases, so extra fine supported, dell doesn't sell rubbish
[05:57] <maco> control_: are you trying to put / and /home on separate hard disks or separate machiens?
[05:57] <control_> im not trying to put anything anywhere
[05:57] <saravan> abhijit, thank you im new to linux,,, by the by ru thr on face book
[05:58] <bofh80> control_: setup a user for where you want access too. ie add a user called mydata or another username and then use maco's other command to change where you log into
[05:58] <control_> i just want the damn home root, the only thing you can see when you login to my ftp user, to be right to a external HD
[05:58] <abhijit> saravan, come in pm
[05:58] <maco> control_: then whyd you say you dont want home on the main hard disk? it has to go *somewhere*
[05:58] <DasEi> Stale_: most hardware can be supported in linix, if you compare to win, the variety is much bigger
[05:58] <control_> Home folder
[05:58] <^cheeky> electronics
[05:58] <control_> not HOME as in the linux users home folder
[05:58] <specialbats> So, I'm new to this system, anyone care to walk me through installing Starcraft from a CD rom? X3
[05:58] <control_> as in, what you see when you login to the ftp
[05:58] <zeleftikam> i want to install ubuntu server 10.04 with a MINIMALIST GNOME desktop installation, without most of the excess desktop user crap like OpenOffice and music players, etc. Is there a package for this?
[05:58] <specialbats> I"m on 10.04
[05:59] <bofh80> you add a user, then change the home folder . don't do it for your user obviously
[05:59] <specialbats> 32 bit
[05:59] <adam45g> as a wubi installer user, do I have to fear the update manager trying to update grub?
[05:59] <bofh80> do it for the one you jsut made for instance
[05:59] <^cheeky> specialbats: scII ?
[05:59] <^cheeky> :P
[05:59] <maco> bofh80: oh oh even better:  sudo usermod -md $dir username
[05:59] <specialbats> It's Starcraft the first.
[05:59] <maco> bofh80: that migrates the data for you!
[05:59] <DasEi> adam45g: little, but more defragmentation of the host-filesystem
[05:59] <control_> i'm so confused
[06:00] <specialbats> I wish it was SCII. :D
[06:00] <adam45g> DasEi, I defrag every week :)
[06:00] <control_> on windows you just set the home dir to what you want the user to see...why is this so freakin hard
[06:00] <maco> control_: me too. im not sure what you're trying to do
[06:00] <maco> control_: do you want chrooted ftp'ing?
[06:00] <control_> ?
[06:01] <bofh80> control_ sudo usermod -d /media/externaldrive  username     (for the user you jsut created, not your user)
[06:01] <control_> i want only a ftp that goes to a external hard drive, nothing else on the servers ubuntu installation
[06:01] <maco> control_:  like where the user sees a fake "system" but its really all just hiding out in a dir on your system
[06:01] <DasEi> !home | control_
[06:01] <DasEi> it's not that hard..
[06:01] <Stale_> DasEi: I must have tried installing a Ubuntu version that was too different from my Dell PC in the wrong way. Okay, I want to know which version number is reported to have the less errors.
[06:01] <whompapotamus> control_: I posted an old vsftp configuration file of mine http://ubuntuone.com/p/CQZ/
[06:01] <maco> DasEi: no control_ is just using funny terminology
[06:01] <DasEi> yupp
[06:01] <control_> i dont want to show the users home dir on linux at all
[06:01] <whompapotamus> control_: May help answer some questions
[06:02] <maco> DasEi: the link you're giving does what he's saying, but its not what he wants
[06:02] <control_> just a ftp that you use to throw files on my external
[06:02] <maco> control_: you want to limit the directories the users can access
[06:02] <control_> yes
[06:02] <control_> to just the external drive
[06:02] <whompapotamus> control_: You can create a mount point anywhere and point vsftp to it
[06:02] <maco> control_: is there something in the config file about restricting ?
[06:03] <control_> and have nothing to do with the linux system
[06:03] <whompapotamus> control_: See the file I posted
[06:03] <control_> how do i point vsftp for this user to just the z drive or whatever
[06:03] <crankharder> anyone know why monit would be giving me this: monit: monit httpd not started since no connect allowed
[06:03] <DasEi> Stale_: If it's a newer dell, I'd use lucid in an alternate-installer cd, and of course mind if 386/with or without pae or 64 bit to take, depending on specs
[06:03] <crankharder> I uncommented the httpd directive in the conf -- but it doesn't work?
[06:03] <maco> control_: maybe this link helps?  http://www.cyberciti.biz/tips/vsftp-chroot-users-limit-to-only-their-home-directory.html
[06:04] <maco> control_: well it wont be called z drive... ;-) but set that drive to mount at say.... /media/ftp
[06:04] <DasEi> Stale_: older then 3 years, I'd start with jaunty and dualboot lucid to check
[06:04] <bofh80> maco: yes as long as he changed the home dir with the command u posted. for the user he created. but he's being confused
[06:04] <maco> control_: then set all those users to have /media/ftp/user1 /media/ftp/user2 etc as their home dirs
[06:04] <maco> control_: and then follow that link i sent
[06:05] <control_> How do i do it without changing everyones home dir
[06:05] <control_> i just want to be like in regular windows ftp where you add only the folder you want them to see
[06:05] <control_> like z:/files/
[06:05]  * specialbats is new to the system and would like assistance installing Starcraft from a CD rom in Wine, and is running Ubuntu 10.04 32 bit.
[06:05] <control_> i dont even want to create linux users, just damn ftp users
[06:05] <Stale_> DasEi: ok. I'll try that on my old Dell PC
[06:06] <maco> control_: you want to limit them to a directory OTHER than their home one?
[06:06] <control_> yes
[06:06] <control_> its just to login, and upload files to the external drive
[06:06] <control_> thats it
[06:06] <DasEi> specialbats: checked #winehq for that app ?
[06:06] <whompapotamus> control_: Charoot
[06:06] <DasEi> !wine
[06:06] <control_> charoot?  no idea what you mean
[06:07] <DasEi> !AppDB > specialbats
[06:07] <whompapotamus> control_: http://ubuntuone.com/p/CQZ/
[06:07] <Michael13guy> how the hell do u pull up sound configuration in xubuntu cant find it anywhere
[06:07] <teamsilence> #cyanogenmod
[06:07] <maco> control_: there's no difference, by the way. a user is a user is a user.
[06:07] <maco> i dont understand why...
[06:07] <specialbats> Thanks
[06:07] <control_> no im used to there being a windows user, and a ftp user
[06:08] <whompapotamus> control_: That is chroot is like a jail
[06:08] <maco> control_: you're not using windows
[06:08] <control_> like if i install filezilla server on windows, i dont have to create seperate windows users for each ftp user...
[06:08] <bofh80> maco: in typical ftp servers on windows boxes, users on the ftp server are 'virtual'
[06:08] <control_> i know im trying to get the same concept as windows ftp
[06:08] <maco> control_: chroot (whompapotamus spelled wrong) means "change root" literally. it means that the user cannot see what exists on the system outside their chroot
[06:08] <DasEi> specialbats: also use an extar repo for wine, the one coming with ubuntu is fine for little apps, but has nothing to do with wines real possibilities
[06:08] <maco> bofh80: and this isnt windows...
[06:08] <specialbats> I just joined that channel
[06:09] <^cheeky> i have 2 HDD , one 160 GB 7200 RPM and the other 7200RPM 1 TB, i want to have windows and ubuntu 10.04 and i am not sure about the partition , would it be beneficial if installed wind7(SCII)/ubuntu10.04 on the 160 GB and then .. umm just use the TB for storage and sharing files ..
[06:09] <Stale_> DasEi: How good is the WineHQ application for Ubuntu?
[06:09] <specialbats> Ooops, sorry. :3
[06:09] <maco> control_: all i can say then, is "too bad"
[06:09] <whompapotamus> maco: On the iPhone - typing hard - correct - you can jail any user to a specific directory
[06:09] <control_> so in linux i cant just install a ftp server, add a FTP USER, and set his ftp "home dir" (the one he sees when he logs in) to my external drive?
[06:09] <bofh80> maco: it's similar for other networking counterparts
[06:09] <maco> control_: things work differently between "The Windows Way" and "Everything Else"
[06:09] <DasEi> Stale_: depends on prog, some run great, others not at all
[06:09] <bsdfreak> the windows way = point, click and crash
[06:09] <bsdfreak> hehe
[06:10] <control_> well at least the filezilla for windows works for what i need...
[06:10] <specialbats> DasEi: thank you. :3
[06:10] <control_> all i click is add user, then add dir and set it to the home dir...
[06:10] <bofh80> maco: pam, samba, etc etc
[06:10] <maco> control_: why are you so adamantly against there being accounts on the system for the ftp users?
[06:10] <DasEi> specialbats: lucid you said ?
[06:10] <DasEi> specialbats: second, repo coming
[06:10] <control_> seems complicated
[06:10] <maco> bofh80: those also use the system accounts...
[06:10] <Stale_> DasEi: Does the .exe works on WineHQ?
[06:11] <sarge1221> sorry to bust in with a question but does anyone here know much about the programs rkhunter and chkrootkit from ubuntu software center?
[06:11] <maco> control_: id consider it simpler. you dont have to muck about making the same account 2 or 3 times...
[06:11] <whompapotamus> control_: Create an FTP user group - and just add users to the group
[06:11] <DasEi> !appDB > Stale_
[06:11] <bofh80> maco: the question is, why would want to give ftp users 'real' accounts. it's not how ftp works in general across the web
[06:11] <control_> you can do that in filezilla too, with just three clicks lol
[06:11] <maco> bofh80: how is it not, when linux and unix make up the majority of servers on the web?
[06:11] <control_> i just dont understand why it cant just make virtual ftp users
[06:11] <saravan> abhijit,..
[06:12] <Stale_> ubottu: what are the commands to see private message?
[06:12] <DasEi> specialbats: one command, both lines : http://pastebin.com/dkCVwK7E
[06:12] <abhijit> saravan, yes?
[06:12] <maco> control_: look, if you want to use windows, use windows
[06:12] <maco> control_: if you want to use linux, then learn to use linux
[06:12] <control_> so to get vsftp to work like i want it to, i have to create a linux user, change its home dir?
[06:12] <DasEi> specialbats: sudo apt-get update
[06:12] <bofh80> maco: you'll probably find other ftp servers besides vsftp, it's just considered standard really
[06:12] <control_> i just dont see why linux cant do the same simple thing
[06:13] <DasEi> specialbats: sudo apt-get install wine (if not done already)
[06:13] <maco> bofh80: i use openssh's included one
[06:13] <maco> bofh80: its been... a year since i last looked at vsftpd config file
[06:13] <whompapotamus> control_: I challenge any windows FTP server against vsftp :)
[06:13] <control_> all i want is to login to the user i create and see the external drive
[06:13] <control_> well vsftp you just said cant do that...so...
[06:14] <maco> control_: it can limit a user to their home dir
[06:14] <whompapotamus> control_: Follow the commands at the end of the file I posted - and you are set
[06:14] <maco> control_: if you put their home dir on the external, everything's happy
[06:14] <control_> not have to create a actual computer user and change its home dir
[06:14] <maco> control_: well theres no *changing* of home dir necessary if you just set the home dir where you want it to start with
[06:14] <control_> ok
[06:15] <control_> I'm just trying to learn how to do things I did in windows, in linux
[06:15] <sarge1221>  can anyone provide some information on using rkhunter and chkrootkit from ubuntu software center? If this isn't the right place to be asking then help in locating a good irc channel would be much appreciated.
[06:15] <bofh80> http://howto.gumph.org/content/setup-virtual-users-and-directories-in-vsftpd/
[06:16] <bofh80> apparently you can
[06:16] <control_> woo
[06:16] <control_> sounds cool
[06:16] <control_> see you learn something new every day haha
[06:16] <bofh80> the thing with linux you soon learn, is you have to read more, but the end result is better than anything you get in windows :)
[06:16] <DasEi> control_: takes 3 to 6 months afterwards you will wonder how one could stick to this damned slow popupthingys can't configure anything with  :)
[06:17] <T-Co> And you can still get the popuptingys with libnotify \o/
[06:17] <control_> so if i just follow this guide it should work like i want it to
[06:18] <control_> virutal users that are not extra users on the linux itself that go to only one folder in the external drive
[06:18] <litropy> hi, peeps - what's the command to run the themes manager?
[06:19] <control_> crap, problems already
[06:19] <tripelb-live> trying to install 9.04 on a new drive. I have partitioned it. I go into install. I look at the partitions, I say continue. Then it tells me that I havent indicated/established? a root partition. I have absolutely no idea how I would do that. Help. This has been going on for days. I obviously dont know what question to ask. This is the latest "stop point".
[06:19] <DasEi> control_: you can have very fine grained acces control under linux : dir/file wise ,  over the group, the owner, or the filesystem, to call the most standard ones
[06:20] <tripelb-live> I have installed UB many times on a previously used HD
[06:20] <scunizi> tripelb-live: how many partitions did you create?
[06:20] <control_> control@server1:/etc$ sudo htpasswd -c /etc/vsftpd/passwd ftp1
[06:20] <control_> htpasswd: cannot create file /etc/vsftpd/passwd
[06:21] <tripelb-live> scunizi: 6. and it called them sdb1, sdb5..sdb10
[06:21] <control_> Do i need to create the user ftp1 first?
[06:21] <control_> on the system itself?
[06:21] <tjz> hey guys~~
[06:21] <tripelb-live> scunizi: there was no sdb2 etc
[06:22] <scunizi> tripelb-live: why so many? at most you need 3 unless you're trying to set a data partition
[06:23] <tripelb-live> scunizi: there was no indication that I had named them /, /home. /d1, 120disk,/d3, /d4
[06:23] <bofh80> control_: http://www.linuxreaders.com/2010/07/14/virtual-users-on-vsftpd-centos/  this is a little more up to date but centos
[06:23] <Elsalvador> com ingreasr a ubuntu es
[06:23] <gremlin_> hey everyone, anyone know much about apache SSL configuration?
[06:24] <sacarlson> gremlin_: ya some
[06:24] <sarge1221> To follow up on my previous comments i have read the read me files for the programs but would like something more of a explanation on what the log results mean when you use rkhunter or chkrootkit. An avid user of the programs that could spare a moment explaining how to interpret the scan logs would be most helpful.
[06:24] <gremlin_> sacarlson: ah cool, I have 3 IP's, and 3 SSL certificates, I want to use 1 certificate per IP
[06:24] <gremlin_> but have multiple virtualhosts on each IP
[06:24] <gremlin_> if that makes sense
[06:24] <tripelb-live> scunizi: I have a bunch of old drives that I am going to copy out and integrate. Especially one 120 G drive that was indicated as "going bad". those are my data partitions
[06:25] <tripelb-live> scunizi: I've never done this on an ubuntu installation before. I thought it would be a good idea
[06:25] <gremlin_> i've setup the listen for each IP, and created a bunch of virtualhosts.. but it just spews angry errors :(
[06:25] <bofh80> control_: you could also try proftp or pureftp. also supposedly with virtual user support
[06:25] <sacarlson> gremlin_: well I've only setup a single address but can't be much harder
[06:26] <sacarlson> gremlin_: did you try setup a single one first?
[06:26] <gremlin_> yeah thats how it was setup on the old server
[06:26] <gremlin_> used to have 3 VM's for it
[06:26] <litropy> hey, guys - I'm looking for the gnome theme manager and I can't find it, so I'm just looking for the command to run. maverick's search can't find it
[06:27] <tripelb-live> scunizi: how do you indicate a root partition. I thought that was the one I called /  == I didnt do anything for swap though. And how big should the boot partition be?
[06:27] <bazhang> !maverick | litropy
[06:27] <litropy> bazhang, it's the same as lucid
[06:28] <bazhang> litropy, the proper channel is #ubuntu+1 nonetheless
[06:28] <bofh80> litropy: gnome-appearance-properties
[06:28] <gremlin_> sacarlson: Hmm, I just changed something around and it didnt die this time...
[06:28] <sacarlson> gremlin_:  well what errors do we see then.  ok cool
[06:28] <gremlin_> it was a very generic.. non.. useful error, haha
[06:29] <gremlin_> i have been googling it for a while
[06:29] <tripelb-live> scunizi: are we still in process?
[06:30] <sacarlson> gremlin_: oh ya that generic.. non.. error very common...... not
[06:30] <gremlin_> sacarlson: Haha, I had closed the log.. "Server should be SSL-aware but has no certificate configured"
[06:30] <sarge1221> can someone direct me to the proper irc channel for software based questions particularly regarding rkhunter and chkrootkit? This current channel is clearly not even close...
[06:31] <gremlin_> I had certificates configured, but it wasn't happy for some reason
[06:31] <gremlin_> so i removed my IP specific listen lines, and enabled a global listen
[06:32] <sacarlson> gremlin_: well i guess I would need to look at your config to have any hope to help but that would be a security risk
[06:32] <gremlin_> sacarlson: I'll PM you
[06:34] <sarge1221> Can anyone see my messages?
[06:35] <maco> sarge1221: nope, theyre in invisible ink
[06:35] <maco> sarge1221: youre going to want a security channel, i think
[06:35] <maco> sarge1221: ask alis
[06:35] <maco> OH so thats why the channel search bot is named alis! "go ask alis"
[06:38] <hasek79> is there a music player that i can play my mp3s and listen to my ipod like itunes?
[06:39] <hasek79> ????
[06:40] <JackStoner> hey, im trying to play a video from this webpage and it says i need to open it in IE please help..
[06:40] <Wiesshund> hasek79 "ipod like tunes"
[06:40] <control_> Can someone please help, why can't i get this to work?  htpasswd -c /etc/vsftpd/passwd ftp1 and i get htpasswd: cannot create file /etc/vsftpd/passwd
[06:40] <JackStoner> hasek79: banshee or rhythmbox
[06:40] <hasek79> ya sure
[06:41] <sacarlson> hasek79: take a look at rhythmbox
[06:41] <nope> control_: put sudo in front
[06:41] <hasek79> i have rhythmbox and it has way too many bugs
[06:41] <control_> control@server1:~$ sudo htpasswd -c /etc/vsftpd/passwd ftp1
[06:41] <control_> htpasswd: cannot create file /etc/vsftpd/passwd
[06:41] <JackStoner> hasek79: i prefer banshee
[06:41] <Wiesshund> hasek79 lots of mp3 players for linux, but i dont know much about using the ipod in it as far as trying to read itunes stuff
[06:41] <control_> still nothin
[06:41] <RealOpty> vsftpd is a pain...
[06:41] <control_> this is redic
[06:41] <TELL0> hasek79, Why don't you use banshee?
[06:41] <JackStoner> !ipod
[06:41] <control_> 40 fing ways to do one thing...nice
[06:41] <Wiesshund> JackStoner link?
[06:42] <hasek79> im installing it right now to try it
[06:42] <JackStoner> Wiesshund: its in the ubuntu repos
[06:42] <RLindsayIV> w00t
[06:42] <RealOpty> control_, if u want a quick and easy ftpd server use pure-ftpd.
[06:42] <control_> i even created the user, gave him admin, changed his home dir, AND put a password on it
[06:42] <control_> omg
[06:42] <Wiesshund> JackStoner the video is?
[06:42] <control_> so vsftp is useless or?
[06:42] <control_> i was told to follow this guide, and i am...
[06:42]  * RealOpty thinks its crap
[06:42] <JackStoner> Wiesshund: sorry ...here http://www.learntosubnet.com/ipaddressing/IPAddressing_files/intro.htm#nopreload=1&TOCEntry=1
[06:43] <JackStoner> Wiesshund: http://www.learntosubnet.com/License_IPAddressing.htm
[06:43] <Wiesshund> JackStoner lol stupid script, web designer didnt think ahead
[06:43] <control_> so...no one knows what im doing wrong?
[06:43] <RLindsayIV> Quick question: Does anyone here know how to get Openfire running properly on 10.04?
[06:43] <JackStoner> Wiesshund: i know...but i need to watch that...any ideas?
[06:44] <Wiesshund> JackStoner maybe, 1 sec
[06:44] <JackStoner> Wiesshund: thnks
[06:45] <control_> omg this is unreal...i follow what you said and....nothing
[06:45] <sacarlson> RealOpty: I just use openssh  to do secure ftp  no setup needed just load.  oh and maybe setup port forwarding
[06:45] <control_> does it let you set a damn home directory?
[06:45] <control_> other then the fing linux user dir
[06:47] <t-flo> it seems as though my hd never goes to sleep... can i set it to rest automatially? the setting in pwr management is set to sleep after a while
[06:47] <DasEi> t-flo: study the options of hdparm (carefully!)
[06:47] <hasek79> banshee doesnt see my ipod? but R.B. does. can banshee see ipods?
[06:47] <RealOpty> sacarlson, yeah i use scp too. but sometimes i like ftp :)
[06:48] <DasEi> !ipod
[06:48] <RealOpty> i was trying to help the guy out
[06:48] <DasEi> hasek79: see above factoid
[06:48] <hasek79> ok
[06:48] <sacarlson> RealOpty: well with sshd running you can even mount it as a file system and browse it like your own file system
[06:48] <Wiesshund> JackStoner https://addons.mozilla.org/en-US/firefox/addon/59 might work
[06:49] <JackStoner> Wiesshund: will try it...
[06:49] <sacarlson> RealOpty: drag drop in nautilus
[06:49] <Wiesshund> JackStoner it still may not display right, the page is written IE specific
[06:49] <RealOpty> sacarlson, nice. i didnt know that.
[06:49] <DasEi> !info smartmontools | t-flo, could also be of interest
[06:49] <RealOpty> sacarlson, tell me how to mount it like that.
[06:50] <JackStoner> Wiesshund: i dont know why this guy was so biased towards IE...well, giving it a shot
[06:50] <sacarlson> RealOpty: places>connect server>ssh
[06:50] <RealOpty> ahhh
[06:50] <sacarlson> RealOpty: gui dude
[06:50] <Wiesshund> JackStoner not so much biased as the tools he used probably, its some kind of MS Office presentation
[06:51] <JackStoner> Wiesshund: it doesnt throw the error but i dont see anything
[06:51] <RealOpty> sacarlson, lol im a cli person my self but i dont think my embedded device supports that.
[06:51] <Wiesshund> JackStoner so it depends or atleast thinks it does, on certain part of IE being available
[06:51] <RealOpty> sacarlson, maybe i need some kind of addon to dropbear.
[06:51] <JackStoner> well...thanks anyways...i'll just visit cisco's site...should have info there
[06:51] <sacarlson> RealOpty: you can mount it with command lines too but you'll have to google it
[06:51] <zer010> hello
[06:52] <zer010> I'm just checking out irssi
[06:52] <RealOpty> sacarlson, damn sftp isnt working on the device.
[06:52]  * RealOpty googles
[06:52] <Wiesshund> JackStoner http://www.tatanka.com.br/ies4linux/page/Installation:Ubuntu
[06:53] <sacarlson> RealOpty: if you system suports files systems then it should work
[06:53] <q_a_z_steve> hey, anybody have any ideas how to script (or if something exists) to evaluate IF FILE A EXISTS ON B DELETE B sort of thing
[06:54] <DasEi> Wiesshund: that's for edgy, there is least jaunty on the same server
[06:54] <scriptwarlock> anyone knows to vertical flip a webcam in ubuntu?
[06:54] <sacarlson> RealOpty: once mounted it's just cd /yourmountpoint
[06:54] <DasEi> JackStoner: and also consider newer wine if you want to go that way
[06:54] <JackStoner> Wiesshund: thanks...i dont think its worth getting IE...its just one page, dont wanna get wine involved :P
[06:55] <scriptwarlock> bump
[06:55] <JackStoner> DasEi: i have wine1.2 running office 2007.
[06:55] <Wiesshund> DasEi will it matter much being a wine app?
[06:56] <DasEi> Wiesshund: as there are different repos set up, I think so
[06:56] <Wiesshund> JackStoner do you know how long the vid is supposed to be?
[06:56] <Ameisen> so
[06:56] <Ameisen> I installed Ubuntu 10 64-bit on my test system at work
[06:56] <Ameisen> I'm the ONLY person running 64-bit there
[06:56] <DasEi> JackStoner: wine 1.2  version 1.4.... should do fine
[06:56] <Ameisen> everyone else is running 32-bit Ubuntu 9.10, cept one person is running 32-bit Ubuntu 10
[06:57] <Four2zero> anyone else having trouble changing to static ip ?
[06:57] <Four2zero> on ubuntu 10.4
[06:57] <sacarlson> Four2zero: did you get my script to go static?
[06:57] <Four2zero> I remove network manager.
[06:57] <Four2zero> no.
[06:57] <Wiesshund> Ameisen i had 10.04 64-bit. i only switched to 32bit because i dont have 4gig ram
[06:57] <Ameisen> how much RAM did you have?
[06:58] <Ameisen> You have to remember, the extra memory access is not the only advantage 64-bit offers.
[06:58] <Ameisen> To access 64-bit registers, you must be in long mode (64-bit)
[06:58] <Wiesshund> 64bit ran fine if i singles tasked and conserved my ram (2gig)
[06:58] <Four2zero> can you post a link, i will give it a try now that network-manager is uninstalled.
[06:58] <Ameisen> hmm/
[06:58]  * JackStoner away 
[06:58] <Ameisen> I've never tried using a 64-bit linux kernel on a low memory system
[06:58] <Ameisen> so, it might have weird memory issues with it.
[06:59] <sacarlson> Four2zero: this is what I use if I want to go static if already booted http://paste.ubuntu.com/476781/
[06:59] <Bossmanbeta> Whenever I have mencoder encode to a FIFO file, then try to play the stream (the fifo file) with mplayer, it works fine, but only the FIRST TIME. Any subsequent time I try to play the FIFO file, Mplayer errors saying "Cannot seek backward in linear streams! Seek failed"  -- would anyone know why ?
[06:59] <Four2zero> sacarlson, do i need to make any changes ?
[07:00] <Wiesshund> it ran fine mostly, just wasnt enough memory for it is all. no errors with it or anything. a few things i couldnt find 64bit drivers/software for but thats the same with any OS
[07:00] <sacarlson> Four2zero:  ya youl have to setup the number you used in your static stuf
[07:00] <Ameisen> unfortunately, the least RAM i've ever run a 64-bit OS on was 2gb, and that wasn't Linux
[07:00] <Ameisen> worked fine though.
[07:00] <sacarlson> Four2zero: take out that if then stuf that was added later
[07:01] <DasEi> Ameisen: why shouldn't it
[07:01] <Jordan_U> Bossmanbeta: Do you understand what a fifo is? That's exactly how fifo's will behave with any application.
[07:01] <Wiesshund> Ameisen it was fine, i just wanted to run more things that i had the ram for in 64bit is all
[07:02] <Ameisen> At work, my system has 8GiB, but by default came with a 32-bit kernel (with PAE enabled though)
[07:02] <Four2zero> all the stuff in /etc/network/interface
[07:02] <Ameisen> So, I could address the 8GiB (up to 64), but a single process could only use up to 4
[07:02] <Bossmanbeta> Jordan_U, I suppose I don't exactly understand. It works only the first time, but not any subsequent time -- any way to correct/compensate for that?
[07:02] <Ameisen> well, 2.5
[07:02] <Ameisen> 3.5*
[07:02] <Jordan_U> Bossmanbeta: What is your actual end goal?
[07:02] <Wiesshund> when i got some money to waste on extra ram for home, ill spend the 10 minutes to put it back to 64bit
[07:03] <Bossmanbeta> Jordan_U, to stream live tv from a hauppauge card over ssh ... and I don't want to use VLC.
[07:03] <scriptwarlock> Jordan_U: got ideas how to vertical flip webcam image in ubuntu?
[07:03] <Jordan_U> scriptwarlock: No.
[07:03] <TrentonAdams> what's the procedure for adding raid/lvm support after the system has been installed?  I've been running lvm for a long time.  I have now pvmoved my volume group over to a raid device, rebooted, and it won't boot.  It says the devices does not exist, dropping to shell.
[07:03] <Wiesshund> scriptwarlock tip the camera upside down?
[07:04] <scriptwarlock> Jordan_U: :) the quickest way but thats not the issue
[07:04] <TrentonAdams> if I do "mdadm --assemble /dev/md0 /dev/sdb1; mdadm --assemble /dev/md1 /dev/sdb2 and drop out of the shell, the system boots normally
[07:04] <scriptwarlock> Jordan_U: opps xsend
[07:04] <Bossmanbeta> Jordan_U, It works reliably 100% the first time... just trying to keep it working any time I try to netcat the stream on the client side
[07:05] <scriptwarlock> Weisshund: lol the quickest way :) but thats not the issue
[07:05] <Wiesshund> scriptwarlock what you trying to do?
[07:05] <Bossmanbeta> Jordan_U, Taking netcat out of it, doing it locally - it also fails after the 1st time. Mplayer cries with the same error.
[07:05] <Jordan_U> TrentonAdams: Run "sudo update-grub" and "sudo update-initramfs -uk all"
[07:05] <Valen> I have a mythbuntu 10.04 system thats having some weird problems, basically it seems to decide what services to start at boot pretty much randomly
[07:05] <nimbiotics> fg
[07:05] <scriptwarlock> Weisshund: i mounted my webcam upside and like to know if we have options to vertical flip
[07:06] <Valen> I'm guessing its because it is only connected by wireless and its related somehow to that coming up
[07:06] <livingdaylight> maco, hi
[07:06] <Wiesshund> scriptwarlock not built in options that i know of, no.
[07:06] <Valen> eg this time around cron apache and postfix werent started
[07:07] <scriptwarlock> Weisshund: cheese and guvcview can do that but on messengers and anything else it was inverted i heard about vflip but dunno if it excist in lucid
[07:07] <DasEi> Valen: randomly for sure not, install bum and use it for unneeded ones, and check the /etc/init/* files
[07:07] <Jordan_U> Bossmanbeta: Where is the fifo and what commands are you using for mplayer and mencoder?
[07:07] <DasEi> !bum
[07:07] <Valen> it is defiantly random
[07:07] <Valen> 50% of the time I get apache
[07:07] <Valen> its a clean install
[07:07] <Wiesshund> scriptwarlock you could always try a karmic version of it and see i guess. some karmic stuff works some doesnt.
[07:08] <DesignerGuy> Help please.... How do I enable PUT requests on my ubuntu server?
[07:08] <scriptwarlock> Weisshund: nah cant use that on my cyber shop
[07:08] <DasEi> Valen: there are certain modules invoking others, lsmod can tell you more
[07:08] <Bossmanbeta> Jordan_U, On the server: Step 1: mkfifo teevee.avi  Step 2: mencoder /dev/video0 -ovc xvid -xvidencopts bitrate=800 -oac mp3lame -lameopts cbr=128 -of avi -o ./teevee.avi
[07:08] <Wiesshund> scriptwarlock cant you rework the mount for the web cam?
[07:09] <Valen> it doesn't seem to be module related, all hardware is working fine
[07:09] <Bossmanbeta> Jordan_U, Step 3: mplayer ./teevee.avi
[07:09] <livingdaylight> I have a problem with Update manager: "The package 'brscan' is in an inconsistent state and needs to be resinstalled, but no archive can be found for it. Do you want to remove it now to continue?"
[07:09] <livingdaylight> When I click 'yes' it whirls away, but doesn't remove it. I'm offered to reinstall it. However, I cannot as dpkg complains
[07:09] <livingdaylight> its like some Catch-22
[07:09] <Bossmanbeta> Jordan_U, this is all local... I really want to do it with netcat, but of course it fails locally with the same error on the 2nd try... so it's an mencoder/mplayer issue not netcat.
[07:10] <Jordan_U> Bossmanbeta: I don't see where ssh is coming into play, or what the advantage is to using a fifo (given that you apparently want the file to be saved on disk).
[07:10] <livingdaylight> I can not remove it
[07:10] <Bossmanbeta> Jordan_U, I get it working locally & with netcat only on the first try.
[07:10] <livingdaylight> or re-install it
[07:10] <scriptwarlock> Weisshund: of course i can but i have a purpose to mount like this way for the purpose of a fix location
[07:10] <Bossmanbeta> Jordan_U, I don't want the file saved to disk
[07:10] <Bossmanbeta> Jordan_U, I am trying to stream live TV to myself
[07:10] <Bossmanbeta> Jordan_U, But encoded to save bandwidth.
[07:10] <scriptwarlock> Weisshund: got no flips on v4l-conf
[07:11] <Four2zero> sacarlson, what needs to be edited in your script ?
[07:11] <Bossmanbeta> Jordan_U, I could encode it to a regular file, but in a few days I'd have huge files.. this is a thing I want to turn on and forget about and tap into the stream (fifo) on demand
[07:11] <aruntomar> ubottu: i knew about update-rc.d, bum is new, thanx
[07:12] <DasEi> aruntomar: ubott.. is the channel ro-bot
[07:12] <DasEi> !brain > aruntomar
[07:12] <Bossmanbeta> Jordan_U, SSH comes into play when trying to tap into the fifo. Fifo is a local affair .. the only way to get it to transfer on a network is via netcat (I think that's the only way...)
[07:12] <Wiesshund> scriptwarlock best suggestion i can give is to mod the mount or webcam then, if you cant flip the incoming video. Or open it up and flip the CCCD
[07:13] <Jordan_U> Bossmanbeta: Your problem is that just like with a normal pipe, the command sending will quit when the command receiving quits.
[07:13] <DasEi> scriptwarlock: i think cheese has an option for it
[07:13] <Bossmanbeta> Jordan_U, On netcat, yes... but take netcat out of it
[07:13] <scriptwarlock> Weisshund: yeah dunno if i can add some little hacks on v4l to add flip options
[07:14] <sacarlson> Four2zero: well you need three addresses an IP a gateway and a dns address  those all have to be changed.  you will also need a custom resolve.conf file that overwrites the one that dhcp changes
[07:14] <TrentonAdams> Jordan_U: Okay, the update-grub is obviously what I needed, seeing it added the insmod lines for me.  One other thing though.  It put my old boot partition uuid back in.
[07:14] <Jordan_U> Bossmanbeta: Ass a test to illustrate this open two terminals, in one run "mkfifo test.fifo; cat > test.fifo" in the other run "cat test.fifo" and start typing into the first terminal.
[07:14] <Bossmanbeta> Jordan_U, this works fine when playing the fifo locally, or via netcat.. but only the first time. Then if I close mplayer (locally or via netcat) and try again (if remote, re-engaging netcat) mplayer gives that error
[07:14] <livingdaylight> http://pastebin.com/C1Dut4Lr
[07:14] <TrentonAdams> Jordan_U: My new boot partition is on raid.
[07:14] <scriptwarlock> DasEi: excatly but not on messengers and skype and empathy
[07:15] <Wiesshund> Bossmanbeta because when you stop mplayer the input stops sending
[07:15] <Jordan_U> TrentonAdams: Now ctrl+c to quit the cat that is "reading", and try typing more lines into the first terminal.
[07:15] <choomra> hey guys!  I will soon be the proud owner of a new system76 laptop, their ultraportable. I would really like to get an SSD, but they are so expensive (SSDs in general), that if I got one it would have to be a mere 40GB. This will likely be enough for my apps and system stuff, but certainly not enough for my music collection (20GB or so) and the movies that I'd want to keep on there. I do however have a computer with ample storage runn
[07:15] <choomra> Lucid at home. My question is, how can I "virtually mount" the hard drive and attached drives of my Lucid computer at home on my laptop? In effect I want my own personal storage cloud. I'm open to all suggestions. I was thinking something like VPN? Thanks so much in advance!
[07:15] <DasEi> scriptwarlock: ic, then you approach is more promising, idk the needed syntax for it though
[07:15] <TrentonAdams> Jordan_U: You meant that message for someone else
[07:16] <Jordan_U> Bossmanbeta: Now ctrl+c to quit the cat that is "reading", and try typing more lines into the first terminal.
[07:16] <Bossmanbeta> Wiesshund, so when I tell mencoder to transcode to a fifo, then play the fifo ... once I kill the player (mplayer), mencoder dies ?
[07:16] <livingdaylight>  I have a problem with Update manager: "The package 'brscan' is in an inconsistent state and needs to be resinstalled, but no archive can be found for it. Do you want to remove it now to continue?"
[07:16] <livingdaylight>  When I click 'yes' it whirls away, but doesn't remove it. I'm offered to reinstall it. However, I cannot as dpkg complains
[07:16] <TrentonAdams> Jordan_U: we were discussing the booting off raid
[07:16] <scriptwarlock> DasEi: tried udevadm but no vflip options
[07:16] <livingdaylight> http://pastebin.com/C1Dut4Lr
[07:16] <Wiesshund> Bossmanbeta thats the basic gist of it, thats how a fifo works
[07:17] <Jordan_U> Bossmanbeta: You'll notice that the cat that is "writing" to the fifo will also quit. That is what is happening to mencoder, once mplayer stops reading mencoder quits.
[07:17] <DasEi> choomra: nas should be fastest, next samba, then ssh and ftp
[07:17] <DasEi> !nas
[07:17] <choomra> !nas | choomra
[07:17] <Wiesshund> livingdaylight you try using synaptic package manager?
[07:17] <Bossmanbeta> Jordan_U, yes I see that
[07:17] <Bossmanbeta> BAH HUMBUG
[07:17] <Jordan_U> Bossmanbeta: Depending on what exactly you want, just putting mencoder into a while loop may solve your problem.
[07:17] <Bossmanbeta> I don't want mencoder to quit !  :)
[07:18] <livingdaylight> Wiesshund, update manager has thrown a red circle with a white dash, like the highway code symbol on my panel. Clicking on it its tried to resolve it.
[07:18] <justSimplyBob> I need some help Multi-booting on a Mac. The goal is OSX, XP, and Ubuntu, it is on a friends mac
[07:18] <Bossmanbeta> Jordan_U, I'm not super great in scripting.. not sure how to do while loops, or what condition I'd put in the while loop
[07:18] <livingdaylight> Wiesshund, basically it says that I need to reinstall and/or remove brscan - but I can't
[07:18] <Wiesshund> livingdaylight not the update manager, the package manager. you can fix broken packages etc in there
[07:18] <choomra> DasEi: thanks. Would nas do what I want it to do? Is there an easy and native way to do this in Ubuntu? (I don't need a GUI).
[07:19] <DasEi> http://developer.novell.com/wiki/index.php/HOWTO:_Install_FreeNAS
[07:19] <Bossmanbeta> Jordan_U, and Wiesshund  you both got my idea .. I just want mencoder to remain persistent so that I can remotely run mplayer in that fifo stream at-will
[07:19] <tasslehoff> After installing 10.04 Grub can't find my Windows 7. http://ubuntuforums.org/showthread.php?t=1452503&page=2 shows a solution, but will this work when my entire Ubuntu install is on an encrypted volume? /boot is not encrypted, but everything else is.
[07:19] <justSimplyBob> any suggestions?
[07:19] <Bossmanbeta> SO I can watch TV remotely at any time via netcat (without fussing with VLC)
[07:19] <DasEi> choomra: are this 100 or giga nics ?
[07:20] <kittenvsdinosaur> any idea why my swap could have disappeared when upgrading to 10.04?
[07:20] <justSimplyBob> My question is partitioning of the HDD
[07:20] <livingdaylight> Wiesshund, I'm getting the same messages: E: the package brscan3 needs to be reinstalled, but I can't find an archive for it. E: internal error opening cache (1) Please report
[07:20] <Jordan_U> tasslehoff: What actually happens when  you try to boot windows from grub?
[07:20] <Bossmanbeta> Jordan_U, What condition would I put in the while loop? I can read up on how to script a while loop
[07:20] <DasEi> choomra: unles you use a switch to connect the two boxes, need a crossovercable for this, when using 100 mb nicks, tuning their parameters can increase their thrughput massivly
[07:20] <Wiesshund> livingdaylight can you mark it for complete removal?
[07:21] <ilovefairuz> kittenvsdinosaur: upgrading is often accompanied with unpredictable issues, just re-add it to /etc/fstab and move on ..
[07:21] <Jordan_U> TrentonAdams: You will probably want to re-install grub to the mbr as well, and reconfigure where it's installed by default on upgrades. "sudo dpkg-reconfigure grub-pc" will do both.
[07:21] <tasslehoff> Jordan_U: Windows isn't shown in Grub at all. I have to press 'shift' at boot to get the Grub menu.
[07:21] <u_ser> 72.174.53.227 is using Gatecrasher on port 6969to probe my system.
[07:22] <livingdaylight> Wiesshund, I click 'ok' and synaptic closes
[07:22] <u_ser> 72.174.53.227 is using Gatecrasher on port 6969 to probe my system.
[07:22] <choomra> DasEi: I'm not entirely sure what you mean, but it is an externally (USB2) attached 1TB sata drive, and the computer connects via wireless N. I don't really follow your second post, but I don't want to buy any extra hardware.
[07:22] <Jordan_U> tasslehoff: That solution will not help you then as it's for a different problem.
[07:22] <kittenvsdinosaur> ilovefairuz, I would if I knew which partition my swap is
[07:22] <dunas> So how do you go about fixing the flash plugin on x64 10.04 to let you click on flash content?
[07:22] <Wiesshund> livingdaylight ok? or apply
[07:22] <Jordan_U> tasslehoff: Is your windows partition encrypted?
[07:23] <kittenvsdinosaur> ilovefairuz, fdisk -l /dev/sda claims not to be able to open the device
[07:23] <u_ser> Some jackoff in Montana is using Gatecrasher on port 6969 to try and open up a backdoor into my Ubuntu system. Here is his address 72.174.53.227
[07:23] <livingdaylight> can someone help me?
[07:23] <Krishnandu> How can I play wmv files in ubuntu??
[07:23] <livingdaylight> Wiesshund, if your big idea is synaptic fogged it
[07:23] <chemical-death> livingdaylight: did your try "sudo apt-get install --reinstall brscan" in terminal? Or "sudo dpkg --configure -a"
[07:23] <DasEi> choomra: even better, if its an external hd, don't need any of the previous told, can just mount it;; I got you so, you wanted to connect the laptop to the desktop-PC and access it's internal hd
[07:23] <Krishnandu> How can I play wmv files in ubuntu?? I've installed all the codecs. It's even getting played on VLC but not on Totem.
[07:23] <livingdaylight> chemical-death, that's the catch-22 it won't let me reinstall either
[07:23] <ilovefairuz> kittenvsdinosaur: sudo
[07:24] <kittenvsdinosaur> ilovefairuz, already root
[07:24] <livingdaylight> chemical-death, --configure -a no, haven't tried
[07:24] <DasEi> Krishnandu: ubuntu-restricted-extras installed ?
[07:24] <Wiesshund> livingdaylight do you have the package to install?
[07:24] <tasslehoff> Jordan_U: no. I have: unencrypted win7, unencrypted /boot, encrypted partition (with /, /home and swap inside).
[07:24] <Krishnandu> How can I play wmv files in ubuntu?? I've installed all the codecs. It's even getting played on VLC but not on Totem.
[07:24] <ilovefairuz> kittenvsdinosaur: are you on the live cd?
[07:24] <DasEi> !repeat
[07:24] <kittenvsdinosaur> ilovefairuz, nope
[07:24] <Krishnandu> DasEi, Yes...It's getting played on VLC. But not on Totem
[07:24] <livingdaylight> Wiesshund, yes
[07:24] <nimbiotics> Guys I need help with networking, I've tried #dd-wrt, ##dd-wrt & ##networking to no avail. can some please help me or tell me if there is any other cjannel that I can try?? TIA!
[07:25] <hidaemon> hidaemon
[07:25] <livingdaylight> chemical-death, its a .deb file
[07:25] <TrentonAdams> Jordan_U: Thanks for the tip, though that wasn't my problem.  For some reason, it was still pulling the id off my old boot partition.  I just wiped it with zeros and update-grub is working fine now.
[07:25] <kittenvsdinosaur> ilovefairuz, (I got asked whether I wanted to wait for /dev/mapper/swap to show up on boot, said no, and it booted fine without a swap)
[07:25] <ilovefairuz> kittenvsdinosaur: try it from there?
[07:25] <Krishnandu> How can I play wmv files in ubuntu?? I've installed all the codecs. It's even getting played on VLC but not on Totem.
[07:25] <tasslehoff> Jordan_U: what is different about the problem in the post except that he installed Windows after Ubuntu whereas I did it the other way around?
[07:25] <choomra> DasEi: External yes, but it would be nice to get to the internal one too. And yes, I want to be able to mount my external/internal harddrive that lives at home, on my laptop from anywhere. I already use DynDNS and have anywhere SSH access, but that doesn't do much in the way of mounting hard drives.
[07:25] <ilovefairuz> justSimplyBob: https://wiki.ubuntu.com/JasonRibeiro/AppleIntelInstallation
[07:25] <TrentonAdams> Jordan_U: I ran the command you suggested anyhow, just to make sure things were setup right, so it would write to both partitions and what not.
[07:25] <kittenvsdinosaur> Krishnandu, is there some echo in here?
[07:25] <xangua> !repeat > Krishnandu
[07:25] <xangua> looks like you can't with gstreamer
[07:25] <sacarlson> nimbiotics: what problem in networking?
[07:26] <TrentonAdams> Jordan_U: So, it probably helped alleviate some future problem. hehe
[07:26] <TrentonAdams> Jordan_U: Thanks for the help
[07:26] <nimbiotics> I'm using a wegt54g with dd-wrt as a wireless bridge. It was working OK but today I started playing with it and I chose another network. Now I cant go back to my network because I cant access the bridge. I have tried Anhry IP Scanner but I'm not sure I'm using it right as I'm not an expert. Alos, I wouldnt want to have to reset the bridge. Is there any way to determine my bridge's IP...
[07:26] <nimbiotics> ...address?? TIA!
[07:26] <DasEi> choomra: an external hd with usb can just be plugged in laptop, best throughput, no probs at all.
[07:26] <tasslehoff> Jordan_U: the boot flag isn't set for the ntfs-partition on my system either
[07:26] <ilovefairuz> kittenvsdinosaur: is your issue only swap or not being able to access the disk at all ?
[07:26] <nimbiotics> sacarlson: I'm using a wegt54g with dd-wrt as a wireless bridge. It was working OK but today I started playing with it and I chose another network. Now I cant go back to my network because I cant access the bridge. I have tried Anhry IP Scanner but I'm not sure I'm using it right as I'm not an expert. Alos, I wouldnt want to have to reset the bridge. Is there any way to determine my bridge's...
[07:26] <nimbiotics> ...IP address?? TIA!
[07:26] <choomra> DasEi: Heh, that's true
[07:26] <Krishnandu> How can I play wmv files in ubuntu?? I've installed all the codecs. It's even getting played on VLC but not on Totem.
[07:27] <Krishnandu> kittenvsdinosaur, wgat??
[07:27] <xangua> Krishnandu: looking in the software center with 'grstreamer ffmpeg' ypu should be able
[07:27] <DasEi> choomra: for the later, use samba (easier to configure, more common) or NAs (slightly faster ~10-15%)
[07:27] <livingdaylight> chemical-death, sudo dpkg --reinstall brscan3-0.2.11-2.i386.deb ?
[07:27] <Krishnandu> xangua, I think I've it already..!! Coz it's getting played on VLC not on Totem
[07:27] <kittenvsdinosaur> ilovefairuz, my installation is on the same hard drive (/dev/sda), so reading is just fine. fdisk refuses to do anything with it though so I can't double check which partition is my swap (I'm guessing /dev/sda5 but eh...)
[07:27] <chemical-death> livingdaylight: did you try just with "sudo dpkg -i filename"
[07:27] <choomra> DasEi: But it's not an option for me, and this is not a really portable xHD. Is there no easy way to do what I'm looking to accomplish? Speed is not one of my primary concerns so much as reliability and simplicity are.
[07:27] <kittenvsdinosaur> Krishnandu, we heard the question the first three times is what I meant
[07:28] <Jordan_U> TrentonAdams: You shouldn't be installing grub to any partitions.
[07:28] <livingdaylight> chemical-death, i fear no one is listening
[07:28] <Krishnandu> kittenvsdinosaur, ohh..!!
[07:28] <DasEi> yes, choomra:
[07:28] <DasEi> !smba
[07:28] <DasEi> !samba
[07:28] <jaybird> how do you stop a program from the command line?
[07:28] <Jordan_U> tasslehoff: Does "sudo os-prober" provide any output?
[07:28] <DasEi> works same with linux-boxes, choomra
[07:28] <ilovefairuz> kittenvsdinosaur: boot live cd and check it, but fdisk not acessing it is probably an indicator of a more serious issue, check permissions of the dev file
[07:28] <Wiesshund> jaybird you mean the kill command?
[07:29] <chemical-death> livingdaylight: try "sudo dpgk --purge brscan"
[07:29] <ilovefairuz> jaybird: killall namehre
[07:29] <nimbiotics> sacarlson: any ideas?
[07:29] <jaybird> yeah, rythmbox isn't opening
[07:29] <kittenvsdinosaur> on a related issue, is there a way to reserve some memory and cpu for root? I recently had some memory leak issues with firefox, and had to wait for it to get OOMed because I couldn't do anything while it was trashing...
[07:29] <Krishnandu> xangua, yes it's already installed
[07:29] <Wiesshund> jaybird run top, to get the PID and kill the process
[07:29] <choomra> DasEi: Well I don't really need Windows interoperability, as both of these are modern Ubuntu boxes. Once set up, can I browse files on samba drives in Nautilus just like a normal hard drive?
[07:29] <kittenvsdinosaur> ilovefairuz, yeah it's a bit worrisome
[07:29] <DasEi> choomra: I won't use swat, just install samba on the desktop, once configure it ( and also secure it), then can access from laptop
[07:29] <tasslehoff> Jordan_U: nothing
[07:29] <livingdaylight> chemical-death, http://pastebin.com/t5hAsm8y
[07:29] <DasEi> works same with linux-boxes, choomra
[07:29] <TrentonAdams> Jordan_U: I meant the mbr, I'm tired
[07:29] <ilovefairuz> Wiesshund:  jaybird: no need to get pid, use killall or pkill
[07:30] <DasEi> choomra: yes
[07:30] <jaybird> k
[07:30] <Jordan_U> tasslehoff: Are all of your ntfs partitions mountable?
[07:30] <TrentonAdams> Jordan_U: I'm tired, maybe I should stop now before I really screw something up. hehe
[07:30] <choomra> DasEi: I see that now. That sounds like the best bet for me then! Thanks for your help, I'll let you know if I've any other questions :)
[07:30] <Krishnandu> Any other way out guys?? Should I try reinstalling that plugin??
[07:30] <DasEi> choomra: can even put it in fstab of lapto, so when connected, it automounts and behaves like a local drive
[07:30] <livingdaylight> chemical-death, dpkg: error processing brscan (--purge): subprocess installed pre-removal script returned error exit status 127
[07:30] <sacarlson> nimbiotics: see my private post
[07:31] <kittenvsdinosaur> ilovefairuz, hrm, gparted can open it fine
[07:31] <chemical-death> livingdaylight: whats with "sudo dpgk --purge --force-depends brscan"
[07:31] <DasEi> choomra: it will be one (little ) hassle setting up smb.conf on the desktop, but internet has lots of good howtos, also on securing it
[07:31] <kittenvsdinosaur> ilovefairuz, the issue seems to be that /dev/sda5 isn't getting mapped to /dev/mapper/swap
[07:32] <choomra> DasEi: No doubt. I'm currently following this tutorial: https://help.ubuntu.com/community/SettingUpSamba
[07:32] <ilovefairuz> kittenvsdinosaur: for the memory question, you can use ulimit on a per process basis
[07:32] <livingdaylight> chemical-death, /var/lib/dpkg/info/brscan.postinst: 3: /usr/local/Brother/sane/setupSaneScan: not found
[07:32] <livingdaylight> dpkg: error while cleaning up:
[07:33] <ilovefairuz> kittenvsdinosaur: sudo swapon /dev/sda5 ?
[07:33] <livingdaylight> chemical-death, subprocess installed post-installation script returned error exit status 127
[07:33] <livingdaylight> Errors were encountered while processing:
[07:33] <livingdaylight>  These are the two lines it keeps throwing up basically, regardless of what command I throw at it
[07:33] <kittenvsdinosaur> ilovefairuz, "read swap header failed: invalid argument"
[07:33] <ilovefairuz> !paste > livingdaylight
[07:33] <kittenvsdinosaur> ...interesting
[07:34] <kittenvsdinosaur> ilovefairuz, mkswap claims the resource is busy
[07:34] <tasslehoff> Jordan_U: yes.
[07:34] <ilovefairuz> kittenvsdinosaur: close gparted
[07:34] <kittenvsdinosaur> ilovefairuz, already closed
[07:34] <Wiesshund> chemical-death http://pastebin.com/C1Dut4Lr
[07:35] <ilovefairuz> kittenvsdinosaur: sudo lsof | grep sda5
[07:35] <kittenvsdinosaur> ilovefairuz, lsof|grep sda5 yields nothing, same for mount
[07:35] <chemical-death> Wiesshund: i know
[07:35] <Jordan_U> tasslehoff: Could you run boot info script as explained here http://ubuntuforums.org/showthread.php?t=1291280 and pastebin the RESULTS.txt?
[07:36] <jaybird_> rhythmbox opened, but only after I used the kill command. I tried this twice and the same thing happened. why is this?
[07:36] <DasEi> choomra: ok to go with this, a more updated one : http://tinyurl.com/y8by6yg
[07:37] <justSimplyBob> thank you ilovefairuz I had trouble find info on multi booting and macs in general.
[07:37] <ilovefairuz> kittenvsdinosaur: try sudo fuser /dev/sda5
[07:37] <ilovefairuz> justSimplyBob: you're welcome
[07:38] <kittenvsdinosaur> ilovefairuz, no output either
[07:38] <choomra> DasEi: Excellent find! I will probably end up using both, as my link explains how to set up auto-mounting via fstab.
[07:38] <DasEi> choomra: readers are the dream of supporters, :-D, good effort
[07:39] <kittenvsdinosaur> ilovefairuz, hm, "swapon -a" seems to have made some swap appear in free
[07:39] <dp_> what does omitting directory Error means.
[07:39] <ilovefairuz> kittenvsdinosaur: odd behavior
[07:39] <kittenvsdinosaur> ilovefairuz, very
[07:40] <millica_212> hi all!
[07:40] <dp_> am getting this while doing : cp cat/mwz destination path
[07:40] <ilovefairuz> dp_: cp -R
[07:40] <dp_> it gives me ommiting dir
[07:40] <dp_> ok
[07:40] <dp_> for recursive ?
[07:40] <ilovefairuz> !hi | millica_212
[07:41] <ilovefairuz> dp_: yes
[07:41] <tasslehoff> Jordan_U: http://ubuntu.pastebin.com/4z2cCy4u
[07:41] <dp_> k thanks ..
[07:41] <kittenvsdinosaur> ilovefairuz, and about ulimit, wouldn't thatrequire me to know in advance which process will become a resource hog? (ok it's usually firefox, but still)
[07:42] <ilovefairuz> kittenvsdinosaur: what's in fstab ?
[07:42] <millica_212> How to support all archive formats (to open, or compress... ? which is the command to install most of (or all) of them ? Thanks!
[07:42] <ilovefairuz> kittenvsdinosaur: can be applied to a shell (and its childern)
[07:42] <kittenvsdinosaur> ilovefairuz, /dev/mapper/swap none swap sw 0 0
[07:42] <DasEi> millica_212: install unp and all needed formats
[07:42] <DasEi> !info unp
[07:43] <acryline> he
[07:43] <acryline> hi
[07:43] <kittenvsdinosaur> ilovefairuz, maybe swap's label got messed up somehow
[07:43] <ilovefairuz> kittenvsdinosaur: change to /dev/sda5 or UUID=stuff from blkid ?
[07:43] <Jordan_U> tasslehoff: You don't have any /bootmgr or /Boot/BCD, which is needed to boot windows.
[07:44] <millica_212> DasEi what is unp ?
[07:44] <DasEi> !info unp | millica_212
[07:44] <ilovefairuz> kittenvsdinosaur: looks like this entry is for encrypted swap partitions
[07:45] <tasslehoff> Jordan_U: is that something Ubuntu should have put there? (how) can I remedy it?
[07:45] <ilovefairuz> millica_212: sudo apt-get install unp
[07:45] <ibrahim-kasem> please tell me How can I verify my nick ? I am using xchat
[07:45] <ilovefairuz> !register > ibrahim-kasem
[07:45] <pinPoint> i have a question
[07:45] <Jordan_U> tasslehoff: No, it's part of Windows. It appears you either have a very odd windows setup or you're missing a partition.
[07:46] <ilovefairuz> !details | pinPoint
[07:46] <pinPoint> i just ran sudo dpkg -i xbmc*.deb
[07:46] <DasEi> !register > ibrahim-kasem
[07:46] <ibrahim-kasem> ilovefairuz: I am registered dude
[07:46] <pinPoint> but my package isn't installed anywhere?
[07:46] <pinPoint> it was a .deb file
[07:46] <ilovefairuz> ibrahim-kasem: /msg nickserv identify yourpasswordhere
[07:46] <ibrahim-kasem> DasEi: I am registered need to enter password only
[07:46] <ibrahim-kasem> ilovefairuz: thank you
[07:47] <DasEi> see above, fabulousfast ilove..
[07:47] <ilovefairuz> pinPoint: have you read the messages that dpkg returned?
[07:47] <millica_212> DasEi i installed unp. but i can not opne the best format : 7z :(
[07:47] <kittenvsdinosaur> ilovefairuz, welp, blkid doesn't output anything either
[07:47] <kittenvsdinosaur> ilovefairuz, I'll just change it to /dev/sda5 for now
[07:47] <ilovefairuz> kittenvsdinosaur: sudo
[07:48] <kittenvsdinosaur> ilovefairuz, I always use a terminal with root, not a huge fan of sudo
[07:48] <DasEi> millica_212: as told above, the formats have to be installed, too, but unp biundles them in one cmd . so..
[07:48] <tasslehoff> Jordan_U: ouch. I had to delete a "system recovery partition" to make room for the other ones I needed. could it be that Dell had put it there?
[07:48] <ilovefairuz> kittenvsdinosaur: me neither, and i recommend against it unless 'timeout' is 0
[07:48] <vlt> Hello. I installed qcad on Ubuntu 10.04. When adding a dimension to a drawing no values are visible. Any idea why? Missing fonts?
[07:48] <DasEi> millica_212: sudo apt-get install p7zip-full
[07:49] <DasEi> millica_212: then try again:         unp YourFileHere
[07:50] <kittenvsdinosaur> ilovefairuz, oh well, at least now I have a swap and firefox can go back to merely killing my hard drive instead of freezing my laptop
[07:50] <millica_212> DasEi unp is not something like "all in one" . so there are the formats which installed with unp command ?
[07:50] <ibrahim-kasem>  /msg nickserv identify 333222
[07:50] <kittenvsdinosaur> ibrahim-kasem, nice
[07:50] <ilovefairuz> kittenvsdinosaur: you could execute it inside a shell with a limited ulimit
[07:50] <ibrahim-kasem> kittenvsdinosaur:  :S thank you
[07:50] <DasEi> millica_212: install unp and all needed formats,and read again:
[07:51] <DasEi> !info unp
[07:51] <ibrahim-kasem> !root
[07:51] <ilovefairuz> ibrahim-kasem: no space before /msg
[07:51] <millica_212> DasEi i will remove unp. and i will install one by one the formats...
[07:51] <ibrahim-kasem> ilovefairuz: thnx again
[07:52] <DasEi> millica_212: it determines type of compression automatically , but can only handle installed ones,  tar is next common
[07:52] <kittenvsdinosaur> ilovefairuz, wouldn't that just make it get OOMd?
[07:52] <DasEi> millica_212: to find the formats: apt-cache search compression
[07:53] <HannsGruber> !ct shutdown
[07:53] <ChanTrack>  Quitting.
[07:53] <millica_212> DasEi i wan tto install all of them : apt-cache search compression
[07:53] <ylmfos> hi all
[07:53] <millica_212> but how ?
[07:53] <ilovefairuz> kittenvsdinosaur: if -m is small enough, but i've honestly never ran into that
[07:54] <ilovefairuz> !hi | ylmfos
[07:54] <DasEi> millica_212: or look up in synaptic, might be more comfortable
[07:54] <DasEi> sudo synaptic
[07:54] <DasEi> search for compression
[07:54] <ilovefairuz> millica_212: they don't follow a pattern, you'll have to know the names, and there aren't many anyway
[07:54] <millica_212> DasEi oh it takes times :( is there a command to do what ?
[07:55] <ilovefairuz> millica_212: you'll probably just need p7zip-full and unrar in addition to the installed one
[07:55] <millica_212> ilovefairuz ok i will install them one by one..
[07:55] <ilovefairuz> millica_212: apt-cache search compression
[07:55] <Jordan_U> tasslehoff: I think you left the one Dell put there and deleted the one needed by windows.
[07:56] <millica_212> ilovefairuz someone told me this command but i want to install all the package on the list here...
[07:56] <DasEi> millica_212: you don't need things like lharc too often, amongst others, tar,rar,7zip are most common
 !ct shutdown    <ChanTrack>  Quitting.    ...what is this?
[07:56] <ilovefairuz> millica_212: you'll have to manually pick, they are not all what you think they are
[07:57] <millica_212> ilovefairuz DasEi ok. thank you!
[07:57] <lobito> I cant run exaile, please help!! x(((
[07:57] <lobito> :B D:
[07:57] <DasEi> pack it !, millica_212
[07:57] <ilovefairuz> !details | lobito
[07:57] <kittenvsdinosaur> ilovefairuz, I'll have a closer look at the docs, thanks
[07:57] <lobito> im on ubuntu 9.10 and I have python 2.6, exaile 0.3.0.2
[07:58] <lobito> it simply doesnt run
[07:58] <Jordan_U> tasslehoff: You're going to need to recreate that partition somehow, it might require re-installing windows entirely. Anyway, this is now a question for ##windows.
[07:58] <lobito> wolf@ramael:/$ exaile
[07:58] <lobito> INFO    : Loading Exaile 0.3.2.0...
[07:58] <lobito> INFO    : Loading settings...
[07:58] <lobito> Traceback (most recent call last):
[07:58] <lobito>   File "/usr/lib/exaile/exaile.py", line 52, in <module>
[07:58] <DasEi> well_laid_lawn: the first a not set factoid, the later the exit of another user
[07:58] <FloodBot2> lobito: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[07:58] <lobito>     main()
[07:58] <ilovefairuz> !paste > lobito
[07:59] <lobito> sorry for that, didnt know it was not allowed
[07:59] <lobito> :B
[08:00] <ilovefairuz> lobito: paste there and paste only the address here
[08:02] <lobito> in a program
[08:02] <lobito> it is
[08:02] <lobito> main()
[08:02] <lobito> or main();
[08:02] <FloodBot2> lobito: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[08:02] <lobito> which is the correct?
[08:03] <lobito> here it is
[08:03] <lobito> http://paste.ubuntu.com/476799/
[08:05] <ilovefairuz> lobito: a) group your words on one line b) in python there's neither c) where did you get exaile package? from standard repositories ?
[08:06] <bads> hello
[08:07] <bads> im in terminal
[08:08] <ilovefairuz> bads: all on one line, please
[08:08] <bads> pardon please
[08:08] <ilovefairuz> !pm > lobito, ask in channel
[08:09] <DiggPatriots> does anybody have any links to studies regarding the demographics of linux or ubuntu users?
[08:09] <ilovefairuz> !pm > lobito
[08:09] <lov255> ilovefairuz: After 12 shots at trying to reinstall Ubuntu I finally got it installed, up for walking me through the install of the WUSB100?
[08:09] <DiggPatriots> i need them for a thesis that I am working on
[08:09] <ilovefairuz> lobito: pastebin: apt-cache policy exaile
[08:10] <ilovefairuz> lov255: 12! why is that? and sure, let me find the link
[08:10] <bads> what is the good email
[08:10] <ilovefairuz> bads: email what? client? try evolution or thunderbird
[08:11] <bads> im planning to build a webmail in ubuntu server
[08:11] <bads> any toturial
[08:11] <lobito> http://paste.ubuntu.com/476802/
[08:12] <lov255> ilovefairuz: It turned out no partition could find the two partions /dev2 and /dev3 so Ubuntu was trying to install on 2GB partitions, got half through and came back with errors...ended up HD part they where trying to load was to small.  I had to finally have the Win Vista CD do an NTFS format and come back to install Ubuntu which at that point there where no extra partitions
[08:12] <djolefol> Hot to find out why lots of kde packages are installed in my Gnome Lucid?
[08:13] <ilovefairuz> !mailserver | bads
[08:13] <bads> thanks ubottu
[08:13] <lov255> !death
[08:13] <djolefol> and mysql-server-core?
[08:14] <preecher> how do i convert a odt file to word so people with windows can reaad my documents?
[08:14] <well_laid_lawn> preecher: you can select to save as a ms compatible doc in the menu
[08:15] <ilovefairuz> preecher: file > save as, select another format
[08:15] <djolefol> In synaptic History suddenly mysql-server-core-5.1 is mentioned to be updated, but nowhere is mentioned, when and why it has been installed in the first time.
[08:15] <preecher> thx all
[08:15] <ilovefairuz> lov255: http://razcx.wordpress.com/2010/04/11/getting-a-linksys-rangeplus-wusb100-17370078-working-with-ubuntu-9-10/  redo this
[08:16] <fati> ciao
[08:16] <ilovefairuz> djolefol: did you install any kde applications? like amarok
[08:16] <fati> italiani???
[08:16] <well_laid_lawn> !it
[08:16] <ilovefairuz> !it | fati
[08:17] <ilovefairuz> djolefol: some apps relay on mysql server, especially kde 4 apps
[08:18] <djolefol> ilovefairuz: I have installed science-chemistry which provides Kalzium etc. but I don't see any path from their dependencies to mysql.
[08:19] <liberan> iswitched monitor from one old 17" to 19". i dont recall did ubuntu worked this way, i usually boot into winxp to practice in vmware with ubuntu. but now when i logged in my ubuntu on dual boot, it doesnt go to full screen
[08:19] <ilovefairuz> djolefol: not a direct dependency but through some stuff that comes with standard kde runtime (nemopk?)
[08:19] <liberan> it says 1280 1024 but its like 70% of the screen
[08:20] <ilovefairuz> liberan: usually monitors has a set of buttons next to the power button to adjust this
[08:20] <liberan> doesnt work, i tried to resize it
[08:20] <djolefol> ilovefairuz: I have sometimes used Aptitude etc. Maybe those packages are not listed in Synaptic History, or?
[08:21] <ilovefairuz> djolefol: probably in /var/log/apt
[08:21] <liberan> i tried google, but i dont know what exactly to look for :D
[08:22] <liberan> i messed with graphic drivers and stuff but everything was fine before, even when i reseted graphic to default with live cd
[08:22] <ilovefairuz> liberan: there's also /var/log/dpkg.log ?  check around /var/log
[08:22] <well_laid_lawn> liberan: on the front of your monitor are some buttons - sounds like you need to use them to expand the desktop
[08:22] <liberan> well_laid_lawn: i did it does nto help
[08:22] <well_laid_lawn> k
[08:23] <well_laid_lawn> liberan: are you using a xorg.conf file?
[08:23] <liberan> i dont know, i have latest ubuntu
[08:23] <liberan> 10.04
[08:23] <tranzistor> hi guys.... i just want know why is my skype icon missing in ubuntu 10.4
[08:23] <Virus> Hello
[08:24] <Virus> i m new in ubuntu
[08:24] <well_laid_lawn> liberan: if you didn't add one you don't have then
[08:24] <Virus> do you speak french
[08:24] <tranzistor> it is running but i just dont know how to open it
[08:24] <well_laid_lawn> !fr | Virus
[08:24] <Virus> ok sorry
[08:24] <liberan> maybe i didn, i did fu**** something up once with graphic, but i managed to reset graphic
[08:24] <Virus> goodbye
[08:25] <ilovefairuz> tranzistor: alt + f2 and type skype
[08:25] <nimbiotics> hello everyone. Ive got a couple of users on tis pc. Is there a way i can make a specific user to automatically login on startup?
[08:25] <tranzistor> you dont understand
[08:25] <liberan> maybe i did. unfortunalty my knowledge of linux is not so good, i know to use terminal a bit
[08:26] <tranzistor> i can run it , but when i close the window skype is running....i just dont know how to restore the skype window
[08:26] <littlepenguin> yes nimiotics under system admiistration users
[08:26] <ilovefairuz> tranzistor: right click on panel and add, then find "notification area"
[08:27] <tranzistor> my notification area is running ..but skype icon isnt there
[08:28] <Krishnandu> I installed Netbeans and now when I'm trying to use it, it says /usr/local/glassfish-3.0.1/glassfish/domains/domain1/config/server.policy (permission denied). What to do guys??
[08:28] <littlepenguin> nimbiotics sry wrong login screen settings under system administrator
[08:28] <liberan> tranzistor:  i had problems similar to that, you should try to reset panel, i know i found answer on google
[08:28] <littlepenguin> administration..
[08:29] <lov255> ilovefairuz:rule file added - iwconfig has no wireless extentions dected...we did a .conf file yesterday can you walk me through that?
[08:29] <Krishnandu> I installed Netbeans and now when I'm trying to use it, it says /usr/local/glassfish-3.0.1/glassfish/domains/domain1/config/server.policy (permission denied). What to do guys??
[08:29] <liberan> or right click on panel, and resize it, add more pixels, tranzistor
[08:30] <lov255> .
[08:30] <tranzistor> resize didnt helps
[08:30] <liberan> ilovefairuz: i have log of last two updates, is there some pastebin for ubuntu somewhere
[08:31] <q_a_z_steve> hey, memory is faded for this, is there a install.iso or something placed on the HDD when 10.04 is installed? giving the original iso, or do I just need to download it again?
[08:33] <menace40> wow
[08:33] <menace40> i nver knew ubuntu was so powerfull o0
[08:34] <menace40> just installen and done a tiny bit of hacking and its WSOME
[08:34] <manoj> i need to access my windows share from ubuntu. so when i try to access it through the network/ windows network i get and error
[08:34] <liberan> tranzistor: http://lists.ethernal.org/oldarchives/cantlug-0610/msg00566.html this what helped me
[08:34] <tranzistor> schmidtm ..hi ...dont you have some ancestors from bulgaria ?
[08:34] <menace40> aWSOME *
[08:34] <manoj> Unable to mount location: Failed to retrieve share list from server >>> this is the error i get
[08:35] <liberan> ofcourse, i am total newb, so..
[08:35] <ilovefairuz> !paste > liberan
[08:35] <hanstech> Hi, I installed ubuntu 10 in my new dell inspiron 14R. But My network card is not working. Any help
[08:35] <hanstech> ?
[08:36] <menace40> hanstech ndslwraper ?
[08:36] <ectospasm> I'm having a problem tracking down what's causing my HDD LED to go on solid for several seconds.  iostat reports what I think are high transactions per second (~30 for two devices, and ~90 for my home partition), but System Monitor's disk activity meter consistently reads zero
[08:37] <lov255> ilovefairuz: what do you want me to do now?
[08:37] <liberan> i was about to use pastebin :D
[08:37] <ectospasm> ...this causes my music to stutter, and some windows become briefly inactive (grayed out) during these periods.
[08:37] <ectospasm> As uptime increases, the problem becomes less prevalent.
[08:38] <ilovefairuz> lov255: echo 'install rt2870sta modprobe --ignore-install rt2870sta ; /bin/echo "1737 0078" > /sys/bus/usb/drivers/rt2870/new_id' | sudo tee /etc/modprobe.d/rt2870sta.conf
[08:38] <ectospasm> I did not notice this problem with Karmic, but on Lucid (x86_64) it is really annoying.
[08:38] <q_a_z_steve> hanstech: lspci
[08:38] <q_a_z_steve> !paste > hanstech
[08:38] <SwedeMike> ectospasm: iotop is a good tool to try to find what's going on.
[08:38] <Guest29255> hi , how can i install new themes on my ubutnu 10.4??
[08:38] <ectospasm> I've tried setting the SATA controller to AHCI instead of PCI
[08:39] <ectospasm> SwedeMike: iotop is broken because the Ubuntu kernel maintainers elected to remove a kernel config option
[08:39] <ilovefairuz> lov255: and then reboot, if it didn't work: sudo tail -n 600 /var/log/messages | pastebinit -
[08:39] <Ddorda> hey guys, is it possible to install the global menu without having 2 menus?
[08:39] <ciphersson1> If roku runs on Linux then I don't see why isn't there  a way to get netflix running in Ubuntu...
[08:39] <ectospasm> SwedeMike: and iotop doesn't return any useful data, most traffic is 0, except for brief expected blips
[08:40] <ectospasm> During these "pauses" iotop doesn't indicate anything eating I/O
[08:40] <liberan> http://paste.ubuntu.com/476808/ as log says, last update was 6 of august before today, but today update didnt caused it
[08:41] <jasonwryan> Guest29255: https://help.ubuntu.com/community/UbuntuEyeCandy
[08:41] <hanstech> q_a_z_steve: in lspci it shows my network controller is broadcom corporation device 4727 and ethernet controller is Atheros communications AR8152
[08:41] <hanstech> currently I am intersted only in the wired connection
[08:41] <ectospasm> http://ubuntuforums.org/showthread.php?t=1516712 describes where I'm at with this now
[08:42] <worm> I need some serious help installing a tar.gz file in the commandline....
[08:42] <worm> anytakers?
[08:42] <q_a_z_steve> hanstech: so that should eliminate ndiswrapper, no idea what ndislwrapper or whatever is
[08:42] <alejandro> terra
[08:42] <jasonwryan> worm: man tar
[08:42] <ectospasm> worm: what's your problem?
[08:42] <q_a_z_steve> hanstech: define what isn't working
 lov255: and then reboot, if it didn't work: sudo tail -n 600
[08:43] <lov255>            /var/log/messages | pastebinit
[08:43] <worm> i get to the part where i have to type ./configure
[08:43] <worm>  then make
[08:43] <Guest29255> thx
[08:43] <worm>  but after i type ./configure... it saysno such file or directory
[08:43] <ectospasm> worm: did you unpack the tarball?
[08:43] <Krishnandu> wmv files are not getting played...what to do??
[08:43] <hanstech> q_a_z_steve: I am not able to find eth0
[08:43] <ciphersson1> any one have a solution for running netflix on Ubuntu?  please  I need to figer this out were my wife will leave me alone!
[08:44] <hanstech> and basically when i connected he lan cable to my nic card
[08:44] <amosk> Hello,  Can I use 'ethtool' to query which offload functions are supported by NIC ?
[08:44] <hanstech> the green light is not blinking
[08:44] <ectospasm> ciphersson1: there is a long thread on the forums that delineates why it doesn't currently work
[08:44] <worm> i typed in tar zxvf filename.tar.gz
[08:44] <q_a_z_steve> hanstech ifconfig -a shows others instead?
[08:44] <Krishnandu> wmv files are not getting played...please help
[08:44] <ectospasm> worm: you have to cd filename/
 lov255: and then reboot, if it didn't work: sudo tail -n 600
[08:44] <lov255>            /var/log/messages | pastebinit -
[08:44] <worm> not sure
[08:44] <hanstech> it shows lo only
[08:44] <hanstech> no others
[08:44] <lov2555> Sorry
[08:44] <ilovefairuz> lov2555: ?
[08:45] <worm>  how do I answer that.... cause i do not have a cd... i just downloaded this file. I'm trying to install aircrack
[08:45] <lov2555> trying to keep the command so I an refer back when I reboot
[08:45] <ectospasm> ciphersson1: http://ubuntuforums.org/showthread.php?t=1091125
[08:45] <manoj> can anyone help me with accessing my windows share from ubuntu. i get an error while trying to open
[08:45] <ectospasm> worm: cd == change directory
[08:45] <ciphersson1> Thank you.
[08:45] <lov2555> I was not logged in on my vista system
[08:45] <worm> Oh ok....  then no
[08:45] <hanstech> q_a_z_steve: i even tried to assign a ip then it gave me
[08:45] <hanstech> device not found error
[08:46] <worm> ok so what do I do to change the directory
[08:46] <jasonwryan> worm cd /name/of/directory
[08:46] <worm> i change it to the directory where the tar.gz file is located?
[08:46] <q_a_z_steve> hanstech: ifdown -a && ifup -a
[08:46] <ectospasm> worm: cd filename/  (assuming the -v told you it unpacked into filename/file1..."
[08:46] <lov2555> Ses0mo78!00
[08:46] <jasonwryan> worm: generally the name of the tarball
[08:46] <Vbitz> on sudo apt-get update i am getting a gpg error for lucid releace
[08:47] <worm> ok
[08:47] <worm>  hang on
[08:47] <q_a_z_steve> hanstech: does that do anything?
[08:47] <lov2555> 00!8nS93
[08:47] <hanstech> q_a_z_steve: Nothing
[08:48] <worm> worm@linuxbox:~$ cd aircrack.tar.gz/home
[08:48] <worm> bash: cd: aircrack.tar.gz/home: Not a directory
[08:48] <worm> worm@linuxbox:~$
[08:48] <worm>  i'm typing it wrong arent I?
[08:48] <Vbitz> yes
[08:48] <worm> shoot!
[08:48] <jasonwryan> worm cd aircrack
[08:48] <worm> i typed that
[08:48] <q_a_z_steve> hanstech: no errors or anything?
[08:48] <worm>  and i got the same message
[08:49] <Vbitz> do ls and see if you can see aircrack
[08:49] <worm> ls?
[08:49] <Vbitz> type ls
[08:49] <proto> ls
[08:49] <q_a_z_steve> !ls > worm
[08:49] <worm> yes
[08:49] <worm>  i see two
[08:49] <Vbitz> what are they
[08:49] <worm>  aircrack ng and the name of the one I changed
[08:49] <worm>  aircrack-ng-1.1
[08:50] <Vbitz> then cd to that
[08:50] <worm>  and aircrack.tar.gz
[08:50] <Vbitz> type cd aircrack-ng-1.1
[08:50] <worm> ubottu i see it
[08:50] <lov2555> ilovefairuz: command for getting pastebinit again?  New format
[08:50] <hanstech> q_a_z_steve: no error
[08:50] <q_a_z_steve> !ubottu > worm
[08:51] <manoj> can anyone help me with accessing my windows share from ubuntu. i get an error while trying to open.Unable to mount location: Failed to retrieve share list from server
[08:51] <lov2555> !love
[08:51] <worm> Ok... now it says MYNAME:~/ aircrack$
[08:51] <q_a_z_steve> !fail
[08:51] <Vbitz> W: GPG error: http://archive.canonical.com lucid Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <ftpmaster@ubuntu.com>
[08:51] <ilovefairuz> lov2555: sudo apt-get install pastebinit
[08:51] <dunas> Do kernel updates get pushed to Ubuntu on minor version updates (10.04.1, for example) or is it only on things like 10.10?
[08:51] <Vbitz> is this normal
[08:52] <worm> now do I type Make and then Make iNSTALL?
[08:52] <proto> anyone have experience with PeerBlock? please open PM
[08:52] <ilovefairuz> Vbitz: sudo apt-get update
[08:52] <hanstech> anyone here, has ubuntu + dell inspiron 14R
[08:52] <kiamo> hi
[08:52] <hanstech> ?
[08:52] <iceroot> dunas: only security updates in the same ubuntu-version, so if you have 2.6.26-2 you will never get 2.6.27 you will just get 2.6.26-3 and so on
[08:52] <Vbitz> same error
[08:52] <iceroot> !anyone | hanstech
[08:53] <kiamo> are emerald themes known for causing gnome to freeze?
[08:53] <worm> Ok... argh... Make tells me error 2
[08:53] <ectospasm> worm: are you using Ubuntu?
[08:53] <littlepenguin>  kiamo never had issues with it
[08:53] <q_a_z_steve> hanstech: I'm out of ideas on that at the moment
[08:53] <Vbitz> ilovefairuz i am getting the same problem
[08:53] <dunas> iceroot, dang. Is there an easy way to update the kernel? I'd like to be running around 2.6.35, as opposed to .32.
[08:53] <littlepenguin> kiamo check kernel.log for reason of freeze maybe something is in there
[08:53] <worm> yeah Im on ubuntu 9. something
[08:53] <sacarlson> monoj: seems I can window share my ubuntu with windows with samba but have had problems with windows sharing with ubuntu
[08:54] <kiamo> littlepenguin, will do :) thanks
[08:54] <ectospasm> worm: then do this:  sudo aptitude -y install aircrack-ng
[08:54] <iceroot> dunas: why you need .35?
[08:54] <kiamo> littlepenguin, kern.log or .log.1
[08:54] <manoj> i have installed samba too
[08:54] <kiamo> littlepenguin, i just did a forced reboot
[08:54] <littlepenguin> log.1 is a rotation..so a backup old one
[08:54] <manoj> but i dont have anything to share in my ubuntu but my windows i have my 2tb hd shared fully
[08:55] <Vbitz> any help with my above problem
[08:55] <dunas> iceroot, some bugs in WINE concerning SC2 are fixed by .35 and only patchable on .33 that I'm running into on .32.
[08:55] <worm> Ok i typed that
[08:55] <q_a_z_steve> hey, wubi wouldn't be on a Server CD would it?
[08:55] <iceroot> dunas: you have to build your own kernel from kernel.org or find a ppa which contains .35
[08:55] <iceroot> !ppa | dunas
[08:55] <q_a_z_steve> !wubi
[08:56] <lov255> ilovefairuz: http://pastebin.com/w3RHzV00
[08:56] <ectospasm> worm: did it work? did it install aircrack-ng?  You may need to examine the aptitude output to be sure there were no errors
[08:56] <worm> ectospasm i did that and it said no packages will be installed... none installed none upgraded and none to remove
[08:56] <sacarlson> monoj: well there was a time I had it working but not lately.  one thing I did find when I did have windows share with ubuntu was I needed windows to share with an account that had a password.  not sure this is the case now.
[08:56] <ectospasm> worm: try this:  sudo aptitude search aircrack-ng
[08:57] <manoj> hmmm i will try something and get an aswer to this
[08:57] <ectospasm> worm: if it's listed, there should be an 'i' in front of it indicating it's already installed
[08:58] <liberan> ilovefairuz: http://paste.ubuntu.com/476808/
[08:58] <Vbitz> so is a gpg error with a http://archive.canonical.com
[08:59] <ectospasm> worm:  there is also the possibility that aircrack-ng isn't in any of your loaded apt repositories
[08:59] <vaibhav_> hello
[08:59] <q_a_z_steve> !sane
[08:59] <Vbitz> problem
[08:59] <q_a_z_steve> !problem > Vbitz
[08:59] <lov2555> !crazy
[08:59] <sacarlson> monoj: maybe you should try nfs file shareing.  windows can support that also.  I think it has less athentication problems
[08:59] <worm> an I? lost me
[08:59] <ikonia> sacarlson: NFS on windows is not good
[09:00] <ectospasm> XSane is stupid easy in Ubuntu.  Assuming you have a SANE supported scanner
[09:00] <proto> I hate NFS
[09:00] <manoj> i will try
[09:00] <sacarlson> ikonia: good to know
[09:00] <ectospasm> worm: is anything listed by "sudo aptitude search aircrack-ng"?
[09:00] <ikonia> sacarlson: there is no native support for NFS on windows, it's only usable through unix services for windows
[09:00] <firtvid20> how do i start the ethernet port in ubuntu?
[09:00] <lov2555> firtvid20: which version do you have?
[09:01] <q_a_z_steve> ectospasm: never mind that, was for ##linux
[09:01] <firtvid20> 10.04
[09:01] <Vbitz> i coped and pasted the address then forgot to add the last part
[09:01] <lov2555> firtvid20: go to the icon by the speaker icon up top and click on it, Auth0
[09:01] <Vbitz> so can i get any help with this, it seems like a strange problem
[09:01] <firtvid20> but when i plug my cable in and click on it, it tries to connect then disconnects
[09:01] <sacarlson> ikonia: that's not what this says http://support.microsoft.com/kb/324089
[09:01] <Kiamo> littlepenguin, everything just froze again :(  Don't see anything suspicious in kern.log
[09:02] <lov2555> firtvid20: happens to me sometimes, just do a manual logon
[09:02] <lov2555> ilovefairuz: did you get my last pastebin URL?
[09:02] <littlepenguin> kiamo yes its possible because when your system freezes it wont be able to write entries in log
[09:02] <sacarlson> ikonia: I have used nfs in pxeboot it seemed to work ok for that
[09:02] <firtvid20> i keep restarting and trying but it doesnt work
[09:03] <firtvid20> do i need a driver or something?
[09:03] <Kiamo> littlepenguin, yea, the log viewer displayed a message saying it can't write to log or something like that, and then all my windows grayed over
[09:03] <firtvid20> for my ethernet port?
[09:03] <Kiamo> what else can I do to source the problem?
[09:03] <littlepenguin> ok kiamo you use compiz with emerald?
[09:03] <Kiamo> yes
[09:03] <ectospasm> worm: you still there?  What does the listing of aptitude search show?
[09:03] <Kiamo> just started a few days ago
[09:03] <proto> what was the application to install ubuntu as a window's application?
[09:03] <Kiamo> also started using screenlets
[09:03] <ectospasm> !wubi | proto
[09:04] <Kiamo> so I'm guessing the problem is one of those 3
[09:04] <ilovefairuz> lov2555: checking
[09:04] <Vbitz> !gpg
[09:04] <lov2555> firtvid20: System > Preferences > Network Connections    anything listed under wired?
[09:04] <q_a_z_steve> ectospasm: use >
[09:04] <proto> ectospasm thanks, i was searching for subi =P
[09:05] <ectospasm> q_a_z_steve: I disagree.  Maybe there's others that would like to see the answer, too
[09:05] <lov2555> ilovefairuz: okay thanks, I think we are the same point as last night execpt nothing in iwconfig again
[09:05] <q_a_z_steve> hanstech: lov2555 firtvid20
[09:05] <firtvid20> yes
[09:05] <lov2555> ?
[09:05] <q_a_z_steve> ectospasm: true, I didn't need it, but anyway
[09:05] <firtvid20> it says something like auto eth
[09:05] <firtvid20> autoeth0 i think
[09:06] <q_a_z_steve> sorry, firtvid20 lov2555 you guys are all looking at the same thing, so I thought maybe he could get more help from watching where you two go
[09:06] <lov2555> firtvid20: then your eithernet connection is not dected...did you click on auto0?  You should have that in your upper bar also
[09:06] <littlepenguin> kiamo when using metacity does it occur also?
[09:06] <lov2555> q_a_z_steve: yeah if that dose not work for him someone else is going to have to help him
[09:06] <firtvid20> yeah, i clicked on that but it keeps on getting disconnected
[09:07] <Kiamo> littlepenguin, Im not familiar with metacity... whats that?
[09:07] <lov2555> firtvid20: someone else is going to have to help, that is as far as I can go LOL
[09:07] <littlepenguin> metacity is a windowmanager...
[09:07] <firtvid20> i might reboot into ubuntu recovery and see if that works
[09:07] <lov2555> firtvid20: did it ever work?
[09:07] <littlepenguin> so kiamo when on desktop use alt+f2 run dialog and put metacity --replace in it
[09:08] <q_a_z_steve> lov2555: hanstech has no eth0 or those, only lo
[09:08] <proto> are there any programs that will keep my sysadmin from viewing my internet history?
[09:09] <Kiamo> littlepenguin, aah metacity is the name of the default window decoration things?
[09:09] <q_a_z_steve> proto: dd works
[09:09] <lov2555> q_a_z_steve: he has to install drivers for his internet device
[09:09] <lov2555> I would think
[09:09] <littlepenguin> yes kiamo
[09:09] <q_a_z_steve> lspci wouldn't show things correctly though, and I think it is...
[09:09] <Kiamo> littlepenguin, I don't know, I guess I will have to wait a few hours and see what happens
[09:10] <Guest33290> Hi, am locked out of ubuntu - can login as root in rescue mode & from there can make / edit / delete users & passwords ( none of which work in `production mode')   but thats it -  can anyone pls help suggest something?
[09:11] <MASARUwota> @Guest33290  If you can use root please do a 'passwd root'. You can add a seperate root password. Afterwards, you can login as 'root' in the ubuntu login screen
[09:11] <Vbitz> W: GPG error: http://archive.canonical.com lucid Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <ftpmaster@ubuntu.com>
[09:11] <q_a_z_steve> Guest33290: google root password access in 30 seconds
[09:11] <lov2555> !bash
[09:11] <Vbitz> !apt
[09:11] <proto> q_a_z_steve did you mean the command dd? i don't understand how that would help
[09:11] <Guest33290> nope - done that even changed root's passwd - which was not accepted in either real or rescue mode
[09:12] <Slart> Guest33290: you can also use the same command to set the password for your regular user.. passwd <username> should work
[09:12] <q_a_z_steve> proto: if you're worried, dd
[09:12] <natrixnatrix89> is there a way to rotate a picture in openoffice?
[09:12] <littlepenguin> yes kiamo i want to know if its related to emerald...or to other running application like screenlets
[09:12] <q_a_z_steve> natrixnatrix89: #openoffice
[09:12] <MASARUwota> indeed, Guest33290, you can change the password for your 'usual'  account the same way, like Slart said.
[09:12] <Kiamo> littlepenguin, when I changed to metacity, compiz seems to have stopped running, and my screenlets stopped working properly
[09:13] <littlepenguin> yes ok fine kiamo
[09:13] <littlepenguin> kiamo you could install fusion-icon..with it you get a tray icon to change between the window managers
[09:13] <etyrnal> anyone know how meshpaint works?
[09:13] <q_a_z_steve> it just does
[09:13] <lov2555> While I wait on ilovefairuz  anyone know of a good place to get IRC bot scripts?
[09:13] <johnathan> morning guys
[09:14] <q_a_z_steve> !anyone > etyrnal
[09:14] <lov2555> Morning Johnathan
[09:14] <Kiamo> littlepenguin, I've got it :)
[09:14] <littlepenguin> ok kiamo,.
[09:14] <LoOoD> There a way I can make my wireless card not change freq so often? seems to change every few seconds.
[09:14] <littlepenguin> etyrnal why not use blender instead??
[09:15] <q_a_z_steve> littlepenguin: he's gone dood
[09:15] <Guest33290> problems started when installing vlc server which mysteriously set up an xwindows user & the other users were changed into groups & `invalid users; ran for a while, now can not log in to anything except as root in rescue mode , using passwd, adduser etc don't seem to have any effect - can set up a new user & its password & theyu appear in the relevant files but no way can I log in as that user
[09:15] <Guest33290> or any other including root in `production mode'
[09:15] <ilovefairuz> lov2555: don't use any
[09:16] <johnathan> anyone know of a free cpanel for ubuntu?
[09:16] <lov2555> ilovefairuz: Can't use on this server?
[09:16] <Slart> Guest33290: vlc server? didn't know they had one of those
[09:16] <lov2555> Of course I would not use in here
[09:16] <Guest33290> webmin ?
[09:16] <Slart> !webmin
[09:17] <ilovefairuz> lov2555: depends on the channel, and it's not allowed here
[09:17] <q_a_z_steve> why do people move to yum?
[09:18] <lov2555> ilovefairuz: I would have thought so...naw I just want to tinker around with one..nothing bad...not sending it in here...
[09:18] <lov2555> ilovefairuz: BTW any progress on the WUSB100?
[09:18] <ilovefairuz> lov2555: lsmod | pastebinit -
[09:18] <lov2555> thanks
[09:18] <Guest33290> had major issues with ebox
[09:19] <Guest33290> so short of backup & zap - anyone help with the login issue? pls
[09:19] <Guest33290> some config file somewhere is sayin logins not allowed or simmilar - but where?
[09:22] <lov2555> Ilovefair: command taking forever
[09:24] <djolefol> ilovefairuz: Thanks for helping. Those odd packages (kde*, mysql-server* etc.) was nicely removed by computer janitor. Btw, in Synaptic History you cannot see for example a package Acpi, which is interesting.
[09:25] <lov2555> ilovefairuz: IOError: 104 rest by peer - third time
[09:26] <johnathan> does anyone know how to install web-cp?
[09:26] <lov2555> lsmod
[09:26] <lov2555> Awww it worked
[09:27] <lov2555> ilovefairuz: http://pastebin.com/NZgqZut2
[09:28] <ojii> hi everyone
[09:28] <classical_> hello people :-)
[09:29] <ojii> i accidentaly removed the 'logout/switch user' applet from my panel and can't figure out how to re-add it. it's not in the list of applets I can add...
[09:29] <classical_> Is anybody familiar wit Mod_security ?
[09:29] <classical_> Need help my server is down :((((
[09:30] <ilovefairuz> lov2555: the module is not being loaded at all, pastebin the rules.d file you used
[09:31] <classical_> after i installed mod_security module i have error on my web page :  Bad Request
[09:31] <classical_> Your browser sent a request that this server could not understand.
[09:31] <lov2555> ilovefairuz: can you send me the command for that, I should know it....but errrm beer is starting to get to me
[09:31] <kiamo_> littlepenguin, everything just froze again
[09:32] <ilovefairuz> sudo pastebinit /etc/udev/rules.d/10-wusb100.rules
[09:32] <kiamo_> littlepenguin, nothing grayed over though. I was playing quakelive, so the mouse was locked into the flash window.
[09:32] <ilovefairuz> lov2555: please file a bug report about this, ask for how to do it in #ubuntu-bugs
[09:35] <littlepenguin> kiamo ...that is difficult now..could be a hardware or software issue
[09:35] <lov255> del command dose not work anymore?
[09:35] <littlepenguin> or both..
[09:35] <lov255> or am I thinking DOS?
[09:35] <lov255> rm
[09:35] <littlepenguin> remove
[09:35] <littlepenguin> yep
[09:35] <lov255> I was thinking DOS iggy
[09:36] <littlepenguin> kiamo is your grafics card hot?cpu hot?i mean hotter than normally
[09:36] <littlepenguin> are all fans rotating?
[09:36] <littlepenguin> is there dirt in the fans?
[09:37] <littlepenguin> dust
[09:37] <lov2555> ilovefairuz: kk wait for update please
[09:37] <Kiamo> littlepenguin, how do I check?  laptop feels a little warm, but not noticebly more than normal
[09:37] <littlepenguin> ok..kiamo...in laptop its difficult to look into..except you have xray view :D
[09:38] <lov2555> ilovefairuz: user error - .rules file was saved with a typo
[09:38] <littlepenguin> kiamo which laptop modell
[09:39] <Stale> Hello. I was wondering what Ubuntu version can handle a RAM of 125?
[09:39] <dumkrerng> help me!!
[09:39] <q_a_z_steve> !help dumkrerng
[09:39] <dumkrerng> i set proxy
[09:40] <Kiamo> littlepenguin, dell xps m1530
[09:40] <q_a_z_steve> !help > dumkrerng
[09:40] <Web-sidux431> having a little problem with upgrade here: during synaptic upgrade as well as during aptitude safe-upgrade the upgrade process hangs while "Generating grub.cfg" and doesn't continue. I even rebooted, restarted the upgrade, but it hangs at the same place every time. Any ideas here? (P.S. it's running on a eee pc in ubuntu netbook remix)
[09:40] <lov2555> Ilovefairuz: file is correct now I think going to send it to you
[09:40] <littlepenguin> kiamo which ubuntu version u installed?
[09:40] <ilovefairuz> lov2555: reboot
[09:40] <Kiamo> 10/4
[09:40] <Kiamo> 10.4
[09:41] <Kiamo> littlepenguin, emerald doesn't seem to be the prob, I'll try closing screenlets
[09:41] <Stale> It became obvious to me that Ubuntu 8.04.1 does not work for a RAM of 125... (requires nearly 255 RAM).
[09:42] <littlepenguin> ok kiamo you should close all applications running..
[09:42] <littlepenguin> kiamo u use wlan?
[09:42] <Kiamo> yea
[09:43] <dumkrerng> help me
[09:43] <dumkrerng> i set proxy
[09:43] <Stale> dumkrerng: help on what with proxy?
[09:43] <dumkrerng> i want client set no proxy
[09:43] <dumkrerng> client set gateway
[09:44] <Kiamo> littlepenguin, ok, all thats running is firefox, xchat, tomnotes, compiz and emerald (and the usual os stuff)
[09:44] <Stale> I think you can look into the (client) internet settings w/o any control of router
[09:45] <dumkrerng> ??
[09:46] <Lov255U> ilovefairuz: http://pastebin.com/d6GEkGQ2 and http://pastebin.com/ZCWpTNSd
[09:46] <littlepenguin> kiamo u use wlan?
[09:46] <lov2555> ilovefairuz: we have too many hours invested in this lets not give up :)
[09:46] <Stale> dumkrerng: I am no Linux/Ubuntu smartie, but maybe this link helps (https://help.ubuntu.com/community/UbuntuLTSP/ThinClientProxyRedirect).
[09:46] <Kiamo> littlepenguin, yes
[09:47] <Stale> Unfortunately, I cannot get Ubuntu 8 to work with a 125RAM on a Dell PC (probably low ram and outdated CPU) :\
[09:48] <dumkrerng> Stale, Thaxxx
[09:48] <Stale> dumkrerng: Sorry about the inconvenience.
[09:49] <lylat> Anyone else have  a problem with the burn animation is CCSM reverting to it's default colors upon reboot?
[09:49] <ilovefairuz> lov2555: did you reboot after fixing the file?
[09:49] <lylat> yes
[09:49] <Stale> The Ubuntu 8 does work on a Compaq machine though.
[09:49] <lylat> every reboot I have to re-enter the info
[09:50] <lylat> But strangely, the info is still there
[09:50] <lov2555> ilovefairuz: umm...no comment I will be back to you in a few min
[09:50] <lylat> I just change the capital f's to lower case. That fixes it
[09:50] <lylat> I alternate between capital and lower each reboot
[09:50] <zeleftikam> i get this message on ubuntu "you have to enter your password now because you didn't enter it when you logged in" and it prevents me from connecting to my server via VNC... how can I suppress this?
[09:51] <lov2555> zeleftikam: enter the correct password
[09:52] <ilovefairuz> Stale: there's no ubuntu 8 ...
[09:52] <Magix> Can someone help me?
[09:52] <littlepenguin> Kiamo, http://www.megalinux.net/solution-dell-xps-m1530-ubuntu-810-system-freeze-issue/ its a solution for 8.10 for your laptopmodell
[09:52] <ilovefairuz> !details | Magix
[09:52] <Magix> Because my sound is annoying.
[09:52] <zeleftikam> i can't enter the password there because i can't log in via vnc until i've typed the password
[09:52] <Magix> In Firefox / Opera my sound doesnt work.....
[09:52] <zeleftikam> lov2555
[09:52] <littlepenguin> kiamo maybe its from wlan related..
[09:52] <ilovefairuz> !sound > Magix
[09:52] <Magix> But in other applications it does work.
[09:52] <lov2555> ilovefairuz: I am going to call it quits on the wusb100 tonight...I am doing stupid things like not rebooting...gotta work on it when I am not drinking
[09:52] <Stale> ilovefairuz: whoops, I meant that "8.04.1".
[09:53] <littlepenguin> could u disable wlan and try if freezing is occuring
[09:53] <ilovefairuz> lov2555: alright, and don't forget to report the bug
[09:53] <lov2555> zeleftikam: So then type the password
[09:53] <lov2555> THanks ilovefairuz
[09:53] <lylat> Anyone have any ideas about my CCSM issue?
[09:53] <Magix> ilovefairuz: My sound overall does work. Except Opera and Firefox.
[09:54] <zeleftikam> lov2555» i can't "type the password" because i can't get to the machine via vnc to do so before i type the password. i have to go to the machine and connect a keyboard and display and type the password... THEN i can VNC to it and do whatever, until the next time i restart
[09:54] <Tadpole_Jackson_> eh
[09:54] <Web-sidux431> my safe-upgrade doesn't work on ubuntu netbook remix. Any ideas? It hangs while "generating grub.cfg" and even a reboot doesn't help (will hang on the exact same place at the next upgrade)
[09:54] <Tadpole_Jackson_> why does the default irc channel have to be this :/
[09:54] <ilovefairuz> Magix: flash videos?
[09:54] <Magix> ilovefairuz: Yes.
[09:54] <Magix> ilovefairuz: Sometimes it does work when i reboot a serveral times. But thats annoying.
[09:55] <lov2555> zelefikam: sounds like a problem for someone that is not a drunk noob....only my opinion
[09:55] <geirha> !freenx | zeleftikam
[09:55] <Stale> Tadpole_Jackson: You can use your own customized IRC interface with pjirc
[09:55] <ilovefairuz> Magix: what ubuntu version are you using? and are you running on a 64bit machine?
[09:55] <Magix> ilovefairuz: Kubuntu 10.04 32-bit.
[09:55] <zeleftikam> geirha» what's wrong with the default VNC server, enabled under screen sharing?
[09:55] <_raven_> any tool to generate datasette sounds?
[09:56] <q_a_z_steve> !pastebin
[09:56] <geirha> zeleftikam: You have to be logged in already in order to connect. With NX you can start a new session.
[09:56] <Stale> ilovefairuz: What version have you used on your earliest computer machine yet?
[09:56] <zeleftikam> geirha» ah ha
[09:56] <Tadpole_Jackson> i need killer apps mangs
[09:56] <Magix> ilovefairuz: I have to go now
[09:56] <Tadpole_Jackson> i am going to type sudo apt-get install
[09:56] <Magix> See you later.
[09:56] <Tadpole_Jackson> you tell me what to put after install
[09:57] <tlir> is there a really stripped down version of an ubuntu desktop edition which would fit into a 1GB USB to boot from?
[09:57] <zeleftikam> Tadpole_Jackson» boinc
[09:57] <ilovefairuz> tlir: sever/jeos edition
[09:57] <jasonwryan> Tadpole_Jackson: tmux
[09:58] <ilovefairuz> tlir: no gui, install one
[09:58] <geirha> zeleftikam: And if you close the NX window, the session is suspended, so next time you connect, you'll just resume from where you were last time.
[09:58] <tlir> I need a gui
[09:58] <Tadpole_Jackson> jasonwryan: what it be?
[09:58] <zeleftikam> geirha» is there a client for mac os x?
[09:58] <jasonwryan> Tadpole_Jackson: terminal multiplexer
[09:58] <lylat> Can I get a PM from someone who how's CCSM issues pretty well. It's not a noob question.
[09:58] <Kiamo> littlepenguin, possible, but seems doubtful as I've been using wlan for months now, and this problem only surfaced a few days ago
[09:58] <tlir> ilovefairuz: I need a gui cause I want to test an old computer I have here, to see if it can handle stuff
[09:59] <geirha> zeleftikam: Yes.
[09:59] <Stale> tlir: do you need older Ubuntu releases?
[09:59] <jasonwryan> Tadpole_Jackson: http://tmux.sourceforge.net/
[09:59] <littlepenguin> ah ok kiamo did not know this..
[09:59] <tlir> Stale: nope, I actually would be happy if I could use the latest one
[09:59] <littlepenguin> kiamo have u installed something new?
[09:59] <phanindra> i am unable to read the content in eenadu.net, which is in telugu language. What shall i do?
[10:00] <littlepenguin> kiamo or did some changes=?
[10:00] <ilovefairuz> tlir: try a small distro like tinycore or "damn small linux"
[10:00] <Kiamo> yea, a few days ago I installed some screenlets and emerald themes.  Thats why I thought they might be related.
[10:00] <Stale> tlir: ok, it's because I try a Ubuntu 8.40.1 installation with only 125RAM
[10:00] <Pythoned> Hi, I want to disable the drums at the login screen but had no luck. I went into system>preferences>sound>and put sound theme to no sounds. But at every login screen I can still hear the drums. What can I do?
[10:00] <sacarlson> tlir: you can look at dsl linux (dam small linux) it's another destro that supports gui linux with just 50 meg if you want really small
[10:00] <tlir> ilovefairuz: yep, first thing I tried was DSL as I used it in the past and was satisfied with it though it's not working ok for me. do you have other suggestions possibly? is there no ubuntu-based version?
[10:01] <phanindra> i am unable to read the content in eenadu.net, which is in telugu language. What shall i do?
[10:01] <Kiamo> littlepenguin, yea, a few days ago I installed some screenlets and emerald themes.  Thats why I thought they might be related.
[10:01] <tlir> sacarlson: I don't need it to be super-micro small, there's 1GB of USB to use
[10:01] <Stale> tlir: check out this link (http://old-releases.ubuntu.com/releases/), claims of old Ubuntus.
[10:02] <ShapeShifter499> where are my xorg.conf files, or config files for my ATI card?... I can't find any
[10:02] <sunabozu> is there an ubuntu channel for more indepth problem solving?
[10:02] <sunabozu> for instance, i have a docking station with an ATI radeon 9250 in it
[10:02] <sacarlson> tlir: there is a minimal ubuntu I know nothing about it
[10:02] <Stale> tlir: but the problem is the use of CD-R/CD-RWs...
[10:02] <_raven_> any tool to generate datasette sounds?
[10:02] <tlir> Stale: what about CD-Rs?
[10:02] <littlepenguin> kiamo you have disabled emerald and screenlets and same issue occured?
[10:02] <sunabozu> when i am docked to the docking station while the system is online, it doesn't recognize any of the hardware
[10:03] <sunabozu> when i dock and then power the system on, it gives a user error and will not boot
[10:03] <sunabozu> but, it does show up on the screen connected to the radeon
[10:03] <sunabozu> what gives?
[10:03] <sunabozu> is there a docking station software package i should download?
[10:03] <Kiamo> iv disabled screenlets, we will see
[10:03] <littlepenguin> ok..
[10:03] <ice> ola a todos
[10:03] <ice> hi everybody
[10:03] <Stale> tlir: the releases are usually in .isos, so they need to be burned onto something. The CD-Rs are blank CDs that allows only one 'burning'.
[10:04] <Stale> ice: hi
[10:04] <ice> hi stale
[10:04] <tlir> Stale: I used before the UNetBootin project to put the image onto the US B
[10:04] <tlir> *USB
[10:05] <phanindra> i am unable to read the content in eenadu.net, which is in telugu language. What shall i do?
[10:05] <ice> someone speak spanish
[10:05] <ShapeShifter499> !es | ice
[10:06] <Stale> tlir: that works too.
[10:06] <ice> jejejee ok thanks
[10:06] <Stale> ice: hola ice.
[10:09] <Stale> I guess the chat stops here.
[10:10] <sunabozu> so, anyway, like i was saying
[10:10] <sunabozu> how do i get ubuntu to recognized a hot-plugged pci card?
[10:10] <deploy> Does anyone know if its possible to change the DNS settings for a mobile broadband connection? I dont see anything obvious when I click edit connection.
[10:11] <samstre> hi guys...
[10:12] <ciphersson1> howdy sam
[10:12] <samstre> i've got a problem with 10.04 and xbmc
[10:12] <samstre> :)
[10:12] <samstre> hi
[10:12] <Stale> sunabozu: I had never conceive the possibility of Ubuntu OS software integrated into a bus
[10:13] <Stale> sunabozu: it sounds like hard Assembly Language.
[10:13] <sunabozu> Stale, in no way does what you just said make sense
[10:13] <samstre> i've added the repo and updeted my apt but i still can't find the xbmc paket
[10:13] <sunabozu> this is functionality that windows already has
[10:13] <sunabozu> i assume linux can do this
[10:13] <sunabozu> i just want to know how
[10:14] <tlir> guys I found something
[10:14] <tlir> ubuntu-mini-remix.com, trying it now
[10:14] <Pythoned> Hi, I want to disable the drums at the login screen but had no luck. I went into system>preferences>sound>and put sound theme to no sounds. But at every login screen I can still hear the drums. What can I do?
[10:15] <ShapeShifter499> tlir: you mean ubuntu-mini-remix.org ?
[10:15] <jasonwryan> Pythoned: http://www.webupd8.org/2009/10/turn-off-login-sound-in-ubuntu-karmic.html
[10:16] <Pythoned> jasonwryan,  Will that work for Lucyd aswell?
[10:16] <michaelzemel> hey, can someone give me their opinion on this problem i had?
[10:16] <murlidhar> hey all
[10:16] <jasonwryan> Pythoned: I'd imagine so...
[10:16] <Pythoned> jasonwryan,  Thank you very much.
[10:17] <murlidhar> can we set toolbar_style to text instead of icons in qt4 apps ?
[10:17] <michaelzemel> i was playing starcraft on ubuntu 10.04 in wine...
[10:17] <Gnea> sunabozu: assembly is the code that drives the bus and allows things like hot-plugging to occur
[10:17] <michaelzemel> when my computer crashes and tries to start back up and just can't
[10:17] <murlidhar> afaik we can change toolbar_style options in gconf
[10:17] <michaelzemel> so i unplug it, wait a min, turn it back on and it seems fine.  then the same problem.  i switch PCIE ports for the graphics card cause i thought maybe StarCraft fried my card
[10:18] <murlidhar> i wonder if it q4 apps can follow the same thingy
[10:18] <michaelzemel> then when i tried to boot, it goes right to the command line
[10:18] <littlepenguin> sunabozu sudo modprobe pciehp pciehp_force=1
[10:18] <michaelzemel> anyone?
[10:18] <littlepenguin> sunabozu https://help.ubuntu.com/community/ExpressCard
[10:18] <johnathan> one thing l can say is that starcraft game cannot fry your gpu
[10:19] <johnathan> as its just a game and not a power source
[10:19] <michaelzemel> hm, true
[10:19] <sunabozu> littlepenguin, it's not an expresscard
[10:19] <sunabozu> Gnea, i don't see how that's relevant to now
[10:19] <Slart> Gnea: assembly code drives the bus? please tell me that was a huuuuuuge simplification
[10:19] <michaelzemel> although i'm getting errors at the CP
[10:20] <johnathan> another thing is that should you gpu be fried you wouldn't see your command promt also
[10:20] <Gnea> Slart: care to re-simplify?
[10:20] <michaelzemel> it says ""cannot open the file /boot/grub/grubenv"
[10:20] <Slart> Gnea: "assembly is the code that drives the bus" ..
[10:20] <johnathan> that has nothing to do with your gpu hardware
[10:20] <Gnea> Slart: either re-simplify or do something useful, don't attack me.
[10:20] <michaelzemel> ok
[10:21] <littlepenguin> sunabozu module should also work..
[10:21] <johnathan> its must be a software problem with the installation lm assuming
[10:21] <sunabozu> littlepenguin, is there any software package that will allow me to get use out of a docking station?
[10:21] <sunabozu> as in, a full fledged on
[10:21] <sunabozu> not a port extender
[10:21] <michaelzemel> well ive been running SC2 for a couple weeks now and its been fine
[10:21] <michaelzemel> a few problems here and there, like it'll quit out, but nothing this sever
[10:21] <michaelzemel> e
[10:21] <littlepenguin> sunabozu what you mean use of dockingstatuion?
[10:21] <sunabozu> well
[10:21] <sunabozu> i have a device
[10:22] <michaelzemel> also it says "rm: cannot remove '/var/lib/urandom/random-seed': read-only file system" and "chown: changing ownership of '/tmp/.X11-unix' : read-only file system"
[10:22] <sunabozu> that locks into a port on the bottom of this laptop
[10:22] <Gnea> sunabozu: have you tried plugging it in and see what happens?
[10:22] <sunabozu> it contains a drive bay, a pci slot, and many many ports
[10:22] <xxthink> How to install gitolite on ubuntu?
[10:22] <sunabozu> Gnea, yeah, not a damn thing happens
[10:22] <sunabozu> well, the usb ports turn on
[10:22] <sunabozu> but nothing else
[10:22] <Slart> Gnea: wasn't meant as an attack.. apologies..
[10:22] <xxthink> https://launchpad.net/ubuntu/+source/gitolite/1.5.3-1
[10:22] <Gnea> sunabozu: please to be watching your language, thanks.
[10:22] <xxthink> I find there is a package
[10:22] <xxthink> how to install it
[10:22] <littlepenguin> sunabozu which laptop modell=?
[10:22] <Gnea> Slart: no problem.
[10:22] <Gnea> !laptop
[10:23] <sunabozu> littlepenguin, dell latitude d630
[10:23] <johnathan> that is weird
[10:23] <michaelzemel> yup
[10:23] <airtonix> xxthink, http://wiki.github.com/sitaramc/gitolite/
[10:24] <abhijit> hiya! :)
[10:24] <littlepenguin> sunabozu the dockingstatuion works technically?so it isnt damaged?
[10:24] <michaelzemel> and when i run startx, i get fatal server error "could not create lock file in /tmp/.tx0-lock
[10:24] <sunabozu> littlepenguin, works amazing with identical hardware running windows
[10:24] <littlepenguin> ok..
[10:24] <sunabozu> and it works if the radeon isn't in it in linux
[10:25] <sunabozu> it only doesn't work when the radeon is installed
[10:25] <littlepenguin> ok..
[10:26] <glaucous> I could need some help with a somewhat simple SH script. I need to extract information from this line "card 0: Live [SB Live! Value [SB0101]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]", I need to extract device and card number. How would I do this?
[10:26] <littlepenguin> sunabozu have you tried different drivers for radeon?
[10:27] <Gnea> glaucous: using awk
[10:27] <stanman246> hi. I've got 10.04 running but my ipod is not recognized. It was before, but now all of a sudden it isn't anymore. i'm an ubuntu newbie... how can i see if the usb device is connected?
[10:28] <sunabozu> it doesn't even power on
[10:28] <sunabozu> it locks on boot
[10:28] <glaucous> Gnea: Thanks, seems like what I need
[10:28] <sunabozu> it doesn't even get to the loading screen
[10:28] <sunabozu> anyway, i gotta go
[10:28] <generic_> does ubuntu studio not have all the restrictions on media formats?
[10:28] <MadRobot> Hi all.
[10:28] <Gnea> glaucous: echo "...." | awk '{print $0 $1 $7 $8 $9}'
[10:28] <generic_> unsupported formats, programs compiled without feature ect
[10:28] <Slart> stanman246: lsusb will give you a list of connected usb devices
[10:28] <littlepenguin> sunabozu, lspci which graficscard is shown?
[10:29] <MadRobot> Is the Python2.6 installation that comes with Ubuntu be default incomplete or something?\
[10:29] <stanman246> hmm... it shows my nano 2gb... but rythembox doesn't see it
[10:29] <generic_> anyone?
[10:30] <Slart> MadRobot: I don't think so.. although there are lots of extra stuff that isn's installed by default
[10:30] <stanman246> ubu sees my nano as a disk
[10:31] <RobRR> trying to fix my japanese roommates ubuntu.  He deleted his top panel and now Anthy keyboard symbol won't show up even though I toggle display to system tray.
[10:31] <MadRobot> Slart, I'm trying to install Plone4rc1, and when I point it to the Python installation that I have already, it fails and tells me that there some Python headers missing.
[10:32] <Slart> MadRobot: does it specify which headers it is missing?
[10:33] <MadRobot> Slart, one moment.
[10:34] <MadRobot> Slart, it says it's missing Python.h and import.h.
[10:34] <freefall> !list
[10:34] <Slart> MadRobot: hmm.. you're compiling something? those doesn't look like python source files..
[10:35] <MadRobot> Slart, no. Actually that's how Plone is installed.
[10:35] <abhijit> how add a app to start up with delay?
[10:35] <abhijit> start app*
[10:36] <Slart> MadRobot: hmm.. let me search around for a bit.. I'll get back to you
[10:37] <MadRobot> Slart, thanks.
[10:37] <RobRR> any thoughts on Anthy and Sound menu no longer showing up in notification areas?
[10:37] <jasonwryan> abhijit: use sleep
[10:38] <iceroot> RobRR: add the indicator-applet, its not added by default on 10.04
[10:39] <RobRR> thanks iceroot :)
[10:39] <RobRR> works
[10:39] <Slart> MadRobot: try installing the package python-dev and then try again
[10:39] <michaelzemel> can somebody help me? ive lost the ability to go to gnome in startup
[10:39] <michaelzemel> i get a tty1 screen
[10:39] <michaelzemel> and three strange errors
[10:40] <YankDownUnder> michaelzemel, Hit CTRL+F7 and see what you get.
[10:40] <abhijit> jasonwryan, e.g.?
[10:40] <michaelzemel> Yank, in what screen? on the CP right now, after ive logged in, nothing happens
[10:40] <jasonwryan> abhijit: sleep 30s && application
[10:41] <ilyekkakai> HELLLLP!!! I can't get my changes to artist and album tags for 2 mp3 files to "stick" - they both keep reverting after 3 seconds ... what is up with that?
[10:41] <YankDownUnder> michaelzemel, Hit CTRL+F7 now.
[10:41] <MadRobot> Slart, right. Thanks.
[10:41] <jasonwryan> abhijit: man sleep
[10:41] <abhijit> jasonwryan, hmm
[10:41] <Slart> MadRobot: and then point the plone installer to whereever that source is installed.. /usr/include/python2.6/ or something like that
[10:41] <michaelzemel> Yank, nothing
[10:41] <YankDownUnder> michaelzemel, Are you hitting the CONTROL and F7 key at the same time?
[10:41] <michaelzemel> yes
[10:42] <YankDownUnder> michaelzemel, What did you install/change/modify before this happened?
[10:42] <North_Italian69> What is wrong in my fstab? I can see the unmonted device only opening Nautilus, but On the panel/places missing. this has happened since i modified the fstab. please have a look  http://paste.ubuntu.com/476848/
[10:42] <michaelzemel> Yank, nothing.  I do not install updates to ubuntu for that reason
[10:42] <Bacon> hi, I'd like to know if there is an alternative to dpkg-buildpackage, to build .deb files
[10:43] <michaelzemel> I was playing starcraft and my computer turned off, then tried to turn back on and sputtered
[10:43] <YankDownUnder> michaelzemel, Type "startx" and tell me what happens.
[10:43] <michaelzemel> Yank, Fatal server error: Could not create lock file in tmp/.tx0-lock"
[10:44] <littlepenguin> michaelzemel...zerg infected your cpu :P
[10:44] <adac> What do I have to set for JAVA_HOME path?? with setting it to /usr/lib/jvm/java-6-sun-1.6.0.20 i get the error: "It appears to point to a JRE rather than a JDK."
[10:44] <michaelzemel> so it seems!
[10:44] <YankDownUnder> michaelzemel, Right. Type "sudo reboot" => let the machine restart cleanly. Try again.
[10:44] <michaelzemel> ive done this four or five times.  same thing.
[10:44] <michaelzemel> :-\
[10:45] <lost_and_unfound> greetings all, I am looking for a simple bandwidth monitoring app that will collect all the usage and mail it daily. This must include the port and traffic according to the port. I have looked as ipband and iftop but both have failed. vnStat looks very nice but does not seem to support port usage. I am running ntop on server currently but its a bit of an overkill. Cacti/nagios/zabbix also is too over top top. Any simple sug
[10:45] <michaelzemel> yank, meaning, i have done sudo reboot and startx and the error is the same
[10:45] <skumara> when i boot my laptop it says device /root not found. ubuntu stop loading. it seems that uuid=333... not found. how to solve this?
[10:46] <YankDownUnder> michaelzemel, Right. Then, as root, go to /etc/X11 => rename the xorg.conf to xorg.conf.bak. Reboot the machine.
[10:46] <MadRobot> Slart, It seems to be working now, but I'm still not sure.
[10:46] <ilovefairuz> !grub2 > skumara
[10:46] <ilyekkakai> Why can't I get the changes I make to this mp3 file's tags "stick" in Rhythmbox? The file permissions are set to read & write... it is only 2 files out of a group of 16 that are giving me this issue - all the others stayed changed when I edited their tags. I don't see how these two are any different. It is driving me crazy.. aaaarrgghh!!
[10:46] <YankDownUnder> ilyekkakai, You've answered your own question.
[10:47] <ilovefairuz> adac: what packages have you installed for java?
[10:47] <glaucous> Gnea: With awk, is there a way to ignore a char? I get "0:" when I want to get just "0", since 0: is one word.
[10:47] <Slart> ilyekkakai: can you pastebin the output of ls -la in the folder where the mp3's are?
[10:47] <adac> ilovefairuz, ls /usr/lib/jvm/
[10:47] <adac> default-java  java-1.5.0-gcj-4.4  java-1.6.0-openjdk  java-6-openjdk  java-6-sun  java-6-sun-1.6.0.20
[10:47] <ilovefairuz> ilyekkakai: non ascii characters in the file names?
[10:48] <michaelzemel> Yank, is that just cd etc/X11, then mv xorg.conf xorg.conf.bak?  if so, it says i cannot move it: read-only system
[10:48] <littlepenguin> sudo mv
[10:48] <michaelzemel> kk
[10:48] <littlepenguin> you need root rights under /etc/X11
[10:49] <michaelzemel> same problem
[10:49] <littlepenguin> cd /etc/X11
[10:49] <littlepenguin> mv xorg.conf xorg.conf.ol
[10:49] <michaelzemel> i'm there
[10:49] <littlepenguin> sudo
[10:49] <MadRobot> Slart, It worked! Thanks! :D
[10:49] <Slart> MadRobot: yay
[10:49] <YankDownUnder> michaelzemel, Mate, are you not using sudo or su?
[10:49] <Slart> MadRobot: you're welcome
[10:49] <michaelzemel> Yank, I am.  I got a strange error on start up
[10:50] <ilovefairuz> adac: dpkg --get-selections | grep java
[10:50] <michaelzemel> let me reboot to find it and post it here
[10:50] <YankDownUnder> michaelzemel, sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.bak
[10:50] <YankDownUnder> A strange error?
[10:50] <YankDownUnder> Right.
[10:51] <adac> ilovefairuz, http://pastie.org/1087950
[10:51] <roxlu_> hi, how can I add a user to an existing usergroup
[10:51]  * abhijit is reading The Stranger in the Mirror
[10:51] <michaelzemel> two things.  "rm: cannot remove '/var/lib/urandom/random-seed': read-only file system" & "chown: changing ownership of '/tmp/.X11-unix': Read-only file system"
[10:51] <Iceman_B> how do I remove all symlinks from a dir and leave ALL other file there?
[10:52] <ilovefairuz> adac: seems you have no jdk install, only a jre indeed
[10:52] <ilovefairuz> !java | adac
[10:52] <lost_and_unfound> greetings all, I am looking for a simple bandwidth monitoring app that will collect all the usage and mail it daily. This must include the port and traffic according to the port. I have looked as ipband and iftop but both have failed. vnStat looks very nice but does not seem to support port usage. I am running ntop on server currently but its a bit of an overkill. Cacti/nagios/zabbix also is too over top top. Any simple sug
[10:52] <glaucous> Gnea: Never mind, found it
[10:52] <abhijit> roxlu_, go to system>administration>users and groups cilck on manage groups. then click on group then and select the checkbox to add user
[10:52] <ilovefairuz> adac: although i prefer openjdk, sudo apt-get install openjdk-6-jdk
[10:53] <adac> ilovefairuz, ahh I see :)
[10:53] <Bacon> Can someone tell me if there is an alternative to dpkg-buildpackage, to build .deb files?
[10:53] <YankDownUnder> michaelzemel, Boot with your liveCD, and do a check/repair on the filesystem. It appears that when your "game" crashed, it corrupted the file system - hence your issues.
[10:53] <adac> thx a lot
[10:53] <michaelzemel> Ok, i'll do that. i'm preparing ubuntu on a memory stick as we speak
[10:53] <abhijit> Bacon, apt-get build-dep
[10:53] <YankDownUnder> michaelzemel, Right. I'm getting coffee.
[10:54] <ilovefairuz> abhijit: Bacon: this installs build dependencies, doesn't build packages
[10:54] <abhijit> ilovefairuz, hmm
[10:54] <ilovefairuz> Bacon: why do you want an alternative?
[10:55] <Bacon> ilovefairuz: i'm looking for something more specialized to perl packages
[10:55] <North_Italian69> What is wrong in my fstab?  Please have a look  http://paste.ubuntu.com/476848/
[10:55] <Bacon> ilovefairuz: i'm beginning with .deb and i'd like to know all the possibilities, to understand better the building process
[10:55] <ilovefairuz> abhijit: read the manual
[10:55] <ilyekkakai> Slart, here is the output - as you can see all permissions are the same - http://ubuntu.pastebin.com/VckRDkJu - (sorry I keep getting disconnected from the internet, my connection is being suck)
[10:55] <abhijit> ilovefairuz, he wants it not me.
[10:56] <Yud_Zroc> Which version of ubuntu would be nice on a laptop with 128mb ram, 800mhz Celeron, and an ati rage pro with....xubuntu?
[10:56] <Bacon> ilovefairuz: I read debians documentation and I now have a good understanding of what is a .deb file, but I'm still looking for more knowledge about the tools used to build thelm
[10:56] <YankDownUnder> Yud_Zroc, Can you put more RAM in it?
[10:56] <Slart> ilyekkakai: and which files are giving you problems?
[10:56] <ilovefairuz> Bacon: the debian website has guides for interpreted languages like perl and ruby, including some scripts to build packages from cpan or gems
[10:56] <sacarlson> Yud_Zroc: I guess xbuntu would be best
[10:57] <YankDownUnder> 128mb of RAM. That's really really pushing it.
[10:57] <ilyekkakai> Slart, track 15 and track 16 only.
[10:57] <Bacon> ilovefairuz: ok i'll look for them, thank you!
[10:57] <Yud_Zroc> Date stamp of 1996
[10:57] <ilovefairuz> abhijit: i was referring to apt-get build-dep
[10:57] <YankDownUnder> Unless you use an old version - not 10.04 - it's going to die.
[10:57] <YankDownUnder> Yud_Zroc, In all reality, look into PuppyLinux or DSL for that machine. Hate to tell ya that.
[10:57] <abhijit> ilovefairuz, ok.
[10:57] <Yud_Zroc> Its for just typing and school for my little bro just starting high school
[10:58] <adv_> anyone know how to install opencv in ubuntu?
[10:58] <ilyekkakai> Slart, I mean, number 18 and 19 in the pastebin
[10:58] <ilovefairuz> Yud_Zroc: lubuntu
[10:58] <Slart> ilyekkakai: hmm..not 11, 12 ? the only two with ' in the titles?
[10:58] <Yud_Zroc> Lubuntu?
[10:58] <abhijit> !lubuntu | Yud_Zroc
[10:59] <michaelzemel> Yank, thanks so much for your help.  I did sudo fsck (seeing it saying i should do it manually on the quick start up screen) and it brought me back to my gui
[10:59] <michaelzemel> i'm good
[10:59] <Slart> ilyekkakai: ok.. they look like the rest to me.. strange.. have you tried running rhythmbox from a terminal just to see if it prints out any kind of error message when you try changing the tags?
[10:59] <ilyekkakai> Slart, nope
[10:59] <ilyekkakai> Slart, no.
[10:59] <lost_and_unfound> ubuntu 8 runs darkstat 2.6 by default, how can i update to darkstat 3 via apt?
[10:59] <livingdaylight> maco, you around?
[10:59] <Slart> ilyekkakai: if that doesn't work I would try another tag editor.. easytag is quite ok imho
[10:59] <soreau> adv_: apt? what do you need opencv for?
[11:00] <ilovefairuz> ilyekkakai: sudo apt-get install exfalso ... great tool for tagging
[11:00] <adv_> soreau, no pkg
[11:00] <walilo> hi i've problem with yofrankie the game
[11:00] <Yud_Zroc> Can't view says server down
[11:00] <walilo> http://paste.ubuntu.com/476859/*
[11:00] <walilo> http://paste.ubuntu.com/476859/
[11:01] <ilyekkakai> Slart, ok I will see if Rhythmbox spits anything out into the terminal, then I will look into other methods of retagging...
[11:01] <YankDownUnder> michaelzemel, Coolbeans. Good on ya.
[11:01] <soreau> adv_: What is telling you that?
[11:01] <abhijit> how make firerox to automatically select the address as that of chrome?
[11:01] <ilovefairuz> walilo: that's a segfault/crash .. report a bug.. join #ubuntu-bugs for help on how to do that
[11:02] <ilovefairuz> abhijit: alt + d?
[11:02] <abhijit> ilovefairuz, no
[11:02] <YankDownUnder> Yud_Zroc, Mate, have you read any of the specs and requirements for any of the distros? I'd suggest going to www.distrowatch, looking for PuppyLinux or DSL. You've only got 128mb of RAM.
[11:02] <walilo> thank you ilovefairuz
[11:02] <trond-> hi room. How do I kill X when it has frozen? (can't do reboot as I am doing a backup of the system - because it freezes from time to time!)
[11:02] <ilovefairuz> abhijit: how do you mean "select" it?
[11:02] <abhijit> ilovefairuz, after pressing ald + d when i typr 'my' then firefox dumb give me address of myspace and tell me to select it . but i hwant IT to automatically select it
[11:03] <ilovefairuz> trond-: crtl + alt + print screen/sysreq key + k
[11:03] <Ghostly> i have a odd problem, i have re installed ubuntu but when i boot only the command line grub> appears
[11:03] <trond-> ilovefairuz, nope, no can do
[11:03] <ilyekkakai> Slart, nothing unusual happened in terminal... All I am trying to do is change a word from all uppercase to lowercase...
[11:03] <ilovefairuz> trond-: ?
[11:03] <trond-> ilovefairuz, does not react to it.
[11:04] <abhijit> ilovefairuz, you got my problem>
[11:04] <michaelzemel> Ghostly, off chance of this working.  Hit quit to get back to the command line and then login and type sudo fsck...
[11:04] <ilovefairuz> trond-: can you switch to a terminal ? ctrl + alt + f2 .. or f7 to come back here.. login and do .. sudo killall Xorg
[11:04] <Slart> ilyekkakai: well.. give easytag a go.. see if can do it
[11:04] <trond-> ilovefairuz, I have connected to the computer via ssh, so I can control it from there
[11:04] <trond-> ilovefairuz, ctrl + alt + f2 nope. also not ctrl + alt + backspace
[11:04] <YankDownUnder> trond-, "killall -9 Xorg"
[11:05] <ilovefairuz> abhijit: yes but not sure firefox can do this
[11:05] <OY1R> i have a really REALLY slow inter net connection. So anyone know a terminal web browser for ubuntu  ?
[11:05] <abhijit> ilovefairuz, ohh
[11:05] <Slart> OY1R: links, lynx
[11:05] <ilovefairuz> OY1R: links
[11:05] <ilyekkakai> Slart, it is weird, because it looks like it has worked when I do it in Rhythmbox, then exactly 3 seconds later, it reverts back to the old uppercase version.
[11:05] <trond-> Also: could someone take a look at this: http://pastebin.org/475026 it's output of dmesg after the computer froze.
[11:05] <YankDownUnder> OY1R, lynx linux w3m
[11:06] <Slart> OY1R: although I suspect that disabling images and other "fancy stuff" in firefox might be just as fast
[11:06] <ilovefairuz> OY1R: or install opera and turn on "turbo" it will compress everything, but you're trade off privacy
[11:07] <Slart> ilyekkakai: I've never had that happen to me.. although I've never used rhythmbox so it might be some kind of bug/feature ..
[11:07] <trond-> YankDownUnder, thanks for that command, but not much happened. :/ hm, what I thought was a xorg problem seems to be related to something else.
[11:07] <Parsi>  i'm looking for a minimal linux based on ubuntu
[11:07] <Ghostly> well only grub starts so i can't log inn, the only thing grob does is showing me the command line for grub (probably got the ter for it wrong)
[11:07] <ilovefairuz> Parsi: with or without gui?
[11:07] <sunabozu> is getting kde as simple as installing kubuntu desktop package?
[11:07] <Parsi> ilovefairuz: with gui
[11:07] <Slart> Parsi: lubuntu or xubuntu.. both with X
[11:07] <North_Italian69> since i modified my fstab the mount works bad.  Please have a look  http://paste.ubuntu.com/476848/
[11:07] <ilovefairuz> !grub2 > Ghostly
[11:07] <Slart> sunabozu: yes
[11:07] <tone> ?
[11:07] <Parsi> Slart: thanks
[11:08] <ilovefairuz> Parsi: lubuntu
[11:08] <sunabozu> how easy is it to switch between window managers?
[11:08] <abhijit> sunabozu, matter of seconds :P
[11:08] <tone> i don't know
[11:08] <sunabozu> cool
[11:08] <Slart> sunabozu: I think there is a button or dropdown list at the login screen to select what to run.. not 100% sure though
[11:08] <ilovefairuz> sunabozu: in gdm login screen, you'll find an option to select it
[11:08] <YankDownUnder> North_Italian69, Remove the modifications you've made and start again.
[11:09] <trond-> is it a bad sign to have 32704 free when calling the free command? (does not look that much to me, really)
[11:09] <Slart> North_Italian69: I can't see anything wrong with it.. can you describe what you mean by "works bad" ? are there any error messages?
[11:09] <iceroot> trond-: use free -m to see the data in MegaByte
[11:09] <Slart> trond-: unused memory is wasted memory..
[11:09] <ilovefairuz> trond-: pastebin
[11:10] <tktiddle> how can I get my wireless connected from the commandline?
[11:10] <iceroot> tktiddle: iwconfig
[11:10] <OY1R> thanks for the tips.
[11:10] <ilovefairuz> tktiddle: cnetworkmanager
[11:10] <Slart> trond-: linux in general uses all the memory it can get it's grubby little hands on.. mostly for caching files and such.. that memory is returned as soon as an application needs it though so it's nothing to worry about
[11:10] <Ghostly> the drive i installed ubuntu i set as slave does that affect the grub?
[11:10] <trond-> ilovefairuz, pastebin: http://pastebin.org/475026
[11:10] <Slart> oops.. *its
[11:10] <ilovefairuz> iceroot: iwconfig doesn't support wpa(2)
[11:10] <iceroot> !ram | trond-
[11:11] <iceroot> ilovefairuz: with the wpa-client it should
[11:11] <trond-> Slart, I c. Thanks for explaining. So having 33mb left is nothing to worry about then.
[11:11] <ilovefairuz> trond-: report a bug, join #ubuntu-bugs for help on that
[11:11] <North_Italian69> Slart: few things. from panel/places i can see only mounted device and not all like before, second i cant moun a foppy via gui, only by shell
[11:12] <Slart> trond-: there is another number at the same screen.. +/- buffers or something like that.. that's a better indication
[11:12] <tone> i am a newer
[11:12] <tone> 我想知道用人说中文吗
[11:12] <ilovefairuz> !cn | tone
[11:12] <abhijit> !cn | tone
[11:12] <abhijit> :(
[11:13] <tktiddle> My wireless is normally controlled by networkmanager and connects automatically is there somway to activate it when I just have a terminal (trying to rescue system)
[11:13] <ilovefairuz> tktiddle: sudo apt-get install cnetworkmanager
[11:13] <ilovefairuz> and then: cnetworkmanager
[11:13] <tone> 中文。。？
[11:13] <trond-> Slart, I'll paste that to a pastebin in case someone wants to have a look. This is the second freezup today, and the 5th in two days. Annoying: You bet!!!
[11:13] <Slart> trond-: here's the output from my machine http://pastebin.ubuntu.com/476866/  .. I've got 212 MB free.. but on the second line is the number if you ignore the cache/buffers.. that says I've got 6456 MB free..
[11:14] <ilovefairuz> tktiddle: you'll be able to reuse your connection settings
[11:14] <tone> china
[11:14] <tktiddle> kind of need a network connection to install :(
[11:15] <trond-> Slart, this is mine: http://pastebin.org/475035
[11:15] <Slart> trond-: you've got 572 MB free if you disregard the memory used for buffers.. that's ok
[11:15] <phlak_user> hola
[11:16] <ilovefairuz> tktiddle: are you using wep or wpa encryption ?
[11:16] <trond-> Slart, ok. So I can leave 'low-memory' as a cause for freezing computer then.
[11:16] <ilyekkakai> Slart, I have dicovered something even more bizarre.. those two files, now say the correct tags when viewed in easytag, but when opened in Rhythmbox, they have reverted to the old tags....
[11:17] <ilovefairuz> ilyekkakai: v1 vs. v2 tags?
[11:17] <Slart> trond-: I think so, yes.. unless it happens when you try to run several virtualbox vm's at once or some other memory hungry thing
[11:17] <zackattack> how do I edit my apt sources list so I can install the latest version of Git?
[11:17] <ilyekkakai> ilovefairuz, what is v1 and v2 tags?
[11:17] <Slart> ilyekkakai: perhaps one of the programs is using v1 and the other one is using v2 of the id3 tagging system?
[11:17] <ilovefairuz> zackattack: you'll have to find a repository providing a prebuilt package first
[11:18] <Slart> ilyekkakai: oh.. ask ilovefairuz just said.. =)
[11:18] <phlak_user> !info git
[11:18] <tktiddle> ilovefairuz: It worked with wired OK so Ill just use this and install the cnetwork manager its WEP network
[11:18] <trond-> Slart, nope. I run OpenOffice, Evolution, netbeans and Chrome or Firefox. Tried Chrome in this session, to rule out if it was a firefox/flash problem.
[11:18] <Slart> trond-: you might want to run the memory testing thing as well.. bad memory can do weird things to a machine..
[11:18] <ilovefairuz> ilyekkakai: mp3 files can carry two types of tags, v1 and/or v2 (and they can coexist) so you may be seeing v1 in one program and v2 in another
[11:18] <trond-> Slart, how do I do that?
[11:19] <Ghostly> i rebooted the machine bot when it starts it shows the gnu grub (
[11:19] <phlak_user> Ghostly: what did you expect?
[11:19] <ilovefairuz> Ghostly: boot from live cd and pastebin: sudo fdisk -l
[11:19] <Slart> trond-: when you boot the machine there's a grub menu (you might need to press ESC during boot to show it).. in that meny there's an option to run a memory test.. just leave that running until it's gone through all your memory
[11:19] <ilovefairuz> !paste > Ghostly
[11:20] <Ghostly> phlak_user: i will do that
[11:20] <phlak_user> Slart: trond- you need to press Shift during boot to bring up grub menu; not escape
[11:20] <trond-> Slart, phlak_user ah, right. I'll do that as soon as the backup is done. I nothing else works I'll reload the computer. Upgraded to 10.04 this time... (never a good idea!)
[11:20] <Slart> phlak_user: ah.. thanks.. think I need to reboot myself and run a memory check =)
[11:21] <phlak_user> Slart: yw
[11:21] <trond-> Slart, I wish that was possible in RL. ;)
[11:21] <xerxex> after the last update my dvd:copy and dvd95 converter un-installed and won't get installed again...mplayer crashed (I fixed it now by installing ffmpeg), does anyone know why I cannot install my dvd apps?
[11:21] <Slart> trond-: =)
[11:21] <ilyekkakai> Slart, ilovefairuz - well according to the prefs in easytag, it is set to write both ID3v1 and ID3v2 tags by default.... so I can't work out why RB is still showing up the old tags....
[11:22] <ilovefairuz> ilyekkakai: erase both, and re-tag in RB
[11:22] <Slart> ilyekkakai: perhaps it's got the tags cached so it doesn't need to read them every time it boots up.. isn't there a "refresh my music library" option? perhaps rename the file slightly so it thinks it's a new file?
[11:22] <phlak_user> xerxex: maybe you need libdvdread4
[11:23] <phlak_user> !info libdvdread4 | xerxex
[11:23] <ilovefairuz> Slart: ilyekkakai: Nope! unrelated
[11:23] <ilovefairuz> it does re-read tags
[11:23] <ilovefairuz> "reload" is to re-scan the library for new files
[11:23] <xerxex> I have had them libdvdread4 installed before, maybe it un-installed, I'll check
[11:23] <tktiddle> My ubuntu isnt booting I think because Its run out of disk space, so Im on the terminal trying to create some space, Is there any temporary files I can definatly delete?
[11:24] <e-DIO-t>  /tmp/*
[11:24] <e-DIO-t> ?
[11:24] <phlak_user> tktiddle: you can completely remove all docs
[11:24] <Parsi> ilovefairuz: is there a smaller one? about 100MB
[11:24] <phlak_user> tktiddle: /usr/share/docs
[11:24] <xerxex> libdvdread4 is installed
[11:24] <intel> how to install adobe flash player
[11:24] <xerxex> also xine dissapeared after the last update
[11:24] <intel> for ununtu 9.04
[11:24] <phlak_user> xerxex: ok so what errors do you get
[11:25] <ilovefairuz> tktiddle: sudo apt-get autoclean
[11:25] <trond-> intel, I think you can use either the software installer under system, or you can go to the adobe-website.
[11:25] <ilovefairuz> !flash > intel
[11:25] <phlak_user> tktiddle: sorry it is actually /usr/share/doc
[11:25] <tktiddle> e-DIO-t: /tmp empty, still need more space, what about removing orpanded packages, whats the bestway to do that?
[11:25] <trond-> !flash > trond-
[11:25] <xerxex> the error: requires installation of untrusted packages
[11:25] <intel> no it is not downloaded from adobe website
[11:25] <tktiddle> phlak_user: I think Ill keep the docs!
[11:25] <phlak_user> xerxex: ah so you need the pgp key for the repo
[11:25] <Parsi> guys i need a small (about 100MB) ubuntu based mini linux
[11:26] <Parsi> is there any?
[11:26] <intel> how do we go from system
[11:26] <intel> installer
[11:26] <ilovefairuz> Parsi: check tinycorelinux
[11:26] <phlak_user> tktiddle: i have never seen anyone refer to the docs (which is why we are here)
[11:26] <xerxex> how do I get the pgp key?
[11:26] <Parsi> ilovefairuz: is it ubuntu based?>
[11:26] <ilovefairuz> xerxex: of what?
[11:26] <Slart> Parsi: I think you'd be better off with one of the "designed to be small" distros.. puppy or DSL perhaps
[11:26] <ilovefairuz> Parsi: no, you'll hardly find an ubuntu distro with that size, except without a gui
[11:27] <Parsi> ilovefairuz: is there any of theme without gui?
[11:27] <xerxex> I'm trying to re-install dvd:copy and dvd95-converter
[11:27] <ilovefairuz> Parsi: server
[11:27] <phlak_user> tktiddle: depends on the repo; if its a ppa --> http://ubuntu-tutorials.com/2009/05/14/add-ppa-key-to-your-apt-keyring/
[11:27] <Parsi> ilovefairuz: no
[11:27] <Parsi> for a mini pc
[11:27] <Boeby> intel: why not from adobe page ? - Just go there and download it for ubuntu 8.04, and install this deb-package
[11:28] <ilyekkakai> ilovefairuz, erasing the tag achieved nothing - The old tag still shows up in RB despite being made blank with easytag... and according to easytag, the tag still is blank.
[11:28] <ilovefairuz> Parsi: the ubuntu server editiion is smaller and has the same base as ubutnu desktop
[11:28] <phlak_user> Parsi: if you are looking at Debian Based, go to #damnsmalllinux
[11:28] <tktiddle> phlak_user: I use the man pahes but they can be pretty confusing, are you talking about ubuntu shiped docs?
[11:28] <intel> it asks for the operating system and the software I downloaded does not support the 9.04
[11:29] <phlak_user> tktiddle: nope these are typically added whenever a package is added; mostly release notes, example configs etc; take a look inside that directory
[11:29] <Ghostly> phlak_user: i am trying  fdisk -1 but only get invalid option -- '1'
[11:30] <phlak_user> Ghostly: it is an 'l' (the alphabet L in small case) not the number 1
[11:30] <Ghostly> phlak_use: doh!
[11:30] <xerxex> strange, I manged to install dvd95 through synaptic, it complained that the source was not trusted but it installed
[11:30] <phlak_user> tktiddle: if you do a du -h . you might see how much space they occupy
[11:30] <xerxex> I'll try that with dvd:copy also
[11:31] <ilyekkakai> ilovefairuz, Slart - it is like it is hard-coded into the file somehow to have the album name in all uppercase.... I just don't get it. I will try to rename the files so RB "loses track of them" then re-import them to the library.
[11:31] <phlak_user> tktiddle: i get 171M
[11:31] <ilovefairuz> ilyekkakai: sudo apt-get install eyed5; eyed3 --remove-all "filename"
[11:31] <ubuntu1002> ciao a tuuttu
[11:31] <ilovefairuz> ilyekkakai: it's eyed3 not 5
[11:31] <phlak_user> !it | ubuntu1002
[11:32] <ilyekkakai> ilovefairuz, what is that and what will it do?
[11:32] <ilovefairuz> ilyekkakai: it's a command line tool to modify tags, --remove-all will strip all tags from an mp3 file
[11:33] <ilovefairuz> ilyekkakai: be sure to quote the file name in " and " (just type " and first few letters then press tab, will autocomplete)
[11:34] <xerxex> Why do I get this warning from synaptic: "Warning: You are about to install software that cannot be authenticated!", I didn't get this warning before installing these apps
[11:34] <ilovefairuz> xerxex: sudo apt-get update
[11:34] <trond-> intel, system->administration->synaptic package manager
[11:34] <ilyekkakai> ilovefairuz, I don't want to remove ALL the tags - just one tag.
[11:34] <ilovefairuz> xerxex: if you se any error messages paste them
[11:34] <ilovefairuz> !paste > xerxex
[11:36] <visof> hello
[11:36] <ilovefairuz> ilyekkakai: try calling it with just: eye3d -1 (and then -2)  on the filename to check which versions are written
[11:36] <visof> can i install grub rather than grub2 ?
[11:36] <ikonia> visof: sure can
[11:36] <ilovefairuz> ilyekkakai: to use only v1 or v2, use -1 or -2 with --remove-all
[11:36] <ilovefairuz> visof: grub-pc
[11:38] <ilovefairuz> visof: ah that's grub2, remove it and install just "grub"
[11:38] <Ghostly> http://paste.ubuntu.com/476874/
[11:38] <visof> ilovefairuz aptitude remove grub2 ?
[11:39] <ilovefairuz> visof: sudo apt-get remove grub-*
[11:39] <ilovefairuz> visof: then: sudo apt-get install grub
[11:39] <JustSimplyBob> Hello everyone. I am having major issues with multi-booting. Can anyone help? I can not boot into xubuntu, but it will boot into XP just fine. I don't think I have the partitions setup correctly
[11:39] <ikonia> JustSimplyBob: did it ever work ?
[11:40] <ilovefairuz> visof: make it sudo apt-get remove grub*
[11:40] <ilovefairuz> JustSimplyBob: did you install using wubi or normal install ?
[11:40] <ilyekkakai> ilovefairuz, I just get "eyed3: command not found"
[11:40] <ilovefairuz> ilyekkakai: sudo apt-get install eyed3
[11:40] <JustSimplyBob> I had xubuntu work by it self, then I added a partition for xp (and installed it)
[11:40] <JustSimplyBob> normal
[11:41] <ilyekkakai> ilovefairuz, I already did that. said it was installed.
[11:41] <ilovefairuz> ilyekkakai: eyeD3
[11:41] <shauno> JustSimplyBob, if you installed windows *after* ubuntu, it's probably over-written grub.  it's common enough 'n easy to fix.  https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows
[11:41] <ilovefairuz> weird naming!
[11:41] <Aemaeth> i need some help with some bash basics
[11:42] <ilyekkakai> ilovefairuz, I worked it out.. needs an uppercase D in the eyeD3
[11:42] <tktiddle> how do i remove evolution?
[11:42] <Aemaeth> anyone want to walk me through my error?
[11:42] <giampy> ubuntu italiano
[11:42] <shauno> !it | giampy
[11:42] <ilovefairuz> ilyekkakai: yeah weird naming
[11:42] <ilovefairuz> Aemaeth: pastebin
[11:43] <karlo> what is best flash plug-in ?
[11:43] <ilovefairuz> !flash > karlo
[11:44] <Professor_G> i cant click on  a button in java
[11:45] <Aemaeth> ilovefairuz, http://pastebin.com/Ss7DGsd0
[11:45] <Aemaeth> it's a simple loop...
[11:45] <Aemaeth> but i don't know proper bash loop etiquette
[11:45] <Professor_G> can anyone help
[11:46] <Professor_G> i cant click on  a button in java
[11:46] <ilovefairuz> Aemaeth: $page -gt 0
[11:46] <Aemaeth> does gt stand for "go to"?
[11:46] <shauno> Greater Than
[11:47] <Aemaeth> i c
[11:47] <ilovefairuz> Aemaeth: let pages=pages-1
[11:48] <six110> hi all! i'm having a problem about the recognition of card reader on an acer aspire one d260! http://pastebin.com/0RSr9xYd
[11:48] <Professor_G> i cant click on  a button in java on a website . can anyone help
[11:48] <Aemaeth> it says -gt not found :(
[11:48] <baoduy> hi
[11:48] <Professor_G> can someone help me here
[11:48] <North_Italian69> Uptime: 1 hours and 50 minutes
[11:48] <ilyekkakai> ilovefairuz, look at this - http://ubuntu.pastebin.com/7kQZAUWx - as you can see, the album tag for both v1 and v2 are blank (made so in easytag)... yet STILL it comes up as "ECHOES (DISC1)" in Rb???? and yet not one of the other files in the album exhibit this same annoying bug/feature.
[11:49] <geirha> Aemaeth: while (( pages > 0 )); do
[11:49] <lucas-arg> is it necesary to install any packages for i7 cores?
[11:49] <geirha> Aemaeth: http://mywiki.wooledge.org/Bas
[11:49] <ilyekkakai> ilovefairuz, for some reason, RB thinks these 2 files are different to all the others and I can't see why. I am totally baffled.
[11:49] <Professor_G> where is tempory internet files in ubuntu
[11:49] <ilovefairuz> ilyekkakai: perhaps a buggy program messed up their bit format, --remove-all and try again
[11:49] <geirha> Aemaeth: http://mywiki.wooledge.org/BashGuide  sorry
[11:50] <Professor_G> anyone know
[11:50] <Aemaeth> but then it says pages not found, how could i possibly do this more wrong?
[11:50] <six110> hi all! i'm having a problem about the recognition of card reader on an acer aspire one d260! http://pastebin.com/0RSr9xYd
[11:50] <geirha> Aemaeth: $pages-- is also wrong, it should be  ((pages--))
[11:51] <geirha> Aemaeth: Including the double parenthesis; they're bash syntax
[11:51] <Professor_G> where is tempory internet files in ubuntu
[11:51] <Professor_G> anyone know
[11:51] <drygrain> Professor_G: /tmp/
[11:52] <Professor_G> i'm looking for a intro to a flash site . i want to download it
[11:52] <Professor_G> how would this be done?
[11:53] <Unknown0bc> I am a little confused I think. I am trying to compile a program it stopped giving me this error: /bin/sh: ../../guicast/i686/bootstrap: not found
[11:53] <Unknown0bc> Why is it needing a bootstrap utility  for compiling ?
[11:53] <Unknown0bc> :\
[11:54] <Professor_G> anyone know
[11:54] <MartinObviously> What are you compiling Unknown0bc
[11:54] <Professor_G> drygrain,  i'm looking for a intro to a flash site . i want to download it
[11:54] <Unknown0bc> MartinObviously, Latest version of cinelerra
[11:54] <Unknown0bc> :)
[11:55] <Professor_G>  i'm looking at a intro to a flash site  i want to download it to my computer
[11:57] <Professor_G> can anyone help me
[11:57] <OerHeks> Professor_G, an intro for a flashsite, this is not ubuntu related
[11:58] <ilovefairuz> Professor_G: I think the flashgot extension can do this
[11:59] <OerHeks> ilovefairuz, flashget ?
[11:59] <noss> hi, there somebody from brazil here ?
[11:59] <shauno> Aemaeth: I'd just use a for loop, personally.  ala http://pastebin.com/wAsCBd21
[11:59] <Professor_G> OerHeks,  in ubuntu therefor it is ubuntu related
[12:00] <ilovefairuz> !br | noss
[12:00] <noss> are you from brazil ?
[12:00] <Aemaeth> i think my problem was a confusion with dash and bash
[12:00] <noss> fairuz?
[12:01] <ilovefairuz> noss: write: /join #ubuntu-br
[12:02] <ilovefairuz> OerHeks: flashgOt, it's a firefox addon
[12:02] <intel>  
[12:03] <Professor_G> you mean flashgot
[12:04] <D4CH> http://imgur.com/I87I3.png
[12:04] <D4CH> How come I have two?
[12:04] <D4CH> How do I make it into one?
[12:05] <ilovefairuz> D4CH: two.. what?
[12:05] <D4CH> http://imgur.com/I87I3.png
[12:05] <D4CH> My hdd is seperated into two
[12:05] <D4CH> i only have on OS
[12:06] <ilovefairuz> D4CH: you have four partitions, not two..
[12:06] <D4CH> yeah but two big ones
[12:06] <shauno> two swap partitions is a little unusual
[12:06] <ilovefairuz> D4CH: the second one isn't an actual partition, more of a "grouping" one
[12:06] <MartinObviously> ^
[12:07] <mbn_18> I wish to limit apt to php ver 5.2. Is it possible to do something like this? Package: php* Pin: release a=karmic ?
[12:07] <D4CH> What can I do to make it all normal again?
[12:07] <msjones_> raw /nick Jones
[12:07] <noss> anybody  know how can i edit something in  wins configuration running samba
[12:07] <ilovefairuz> D4CH: baggage from DOS days ..
[12:07] <ilyekkakai> ilovefairuz, did my message (about 5 seconds ago) get through? I got disconnected again...
[12:07] <shauno> ilovefairuz: he does appear to have two ext4 partitions tho
[12:07] <intel> how to install new screen savers for ubuntu 9.04
[12:07] <ilovefairuz> ilyekkakai: don't think so
[12:08] <ilyekkakai> ilovefairuz, I don't know how, but your remove-all trick worked. The persistent RB tags have been exterminated and the new tags are now allowed to stay put.
[12:08] <intel> please help
[12:08] <ilovefairuz> ilyekkakai: simply because the tool blanked the whole portion of the file concerned with tags
[12:08] <D4CH> can I delete some partitions and add it to my current OS?
[12:09] <ilovefairuz> D4CH: you seem to have two installations .. of ubuntu ?
[12:09] <D4CH> I dont
[12:09] <ilovefairuz> D4CH: pastebin: mount
[12:09] <ilovefairuz> !paste > D4CH
[12:09] <D4CH> My first installation crashed, so I did it again and deleted all partitions, but apparently i screwed up
[12:10] <ilovefairuz> D4CH: you didn't screw up, you just didn't reuse the partitions left over from the first attempt
[12:10] <D4CH> What am I supposed to paste?
[12:10] <D4CH> aha
[12:10] <ilovefairuz> D4CH: paste the output of the 'mount' command
[12:10] <intel> How appropriate is ubuntu 9.10
[12:10] <noss> anyone help wins server
[12:10] <D4CH> ilovefairuz: I started using ubuntu yesterday, how do i do it?
[12:10] <ilovefairuz> intel: for fresh install use lucid
[12:11] <ilovefairuz> !terminal | D4CH
[12:11] <ilovefairuz> D4CH: type sudo apt-get install pastebinit && mount | pastebinit -
[12:12] <D4CH> E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
[12:12] <D4CH> E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
[12:12] <ilovefairuz> D4CH: do you synaptic running or updates being downloaded?
[12:13] <ilovefairuz> do you have *
[12:13] <D4CH> Aah, there we go
[12:13] <D4CH> I did, yes
[12:13] <D4CH> http://pastebin.com/xC1WxFVX
[12:13] <Professor_G> that extension didn't work with the clip
[12:14] <ilyekkakai> ilovefairuz, sorry.. I spoke too soon, it didn't work afterall.. a few seconds after RB have been running, the old bad tags returned *pulls hair out!*
[12:14] <tim__> I have 2 disks the sda has / mounted and sdb has /home mounted. Are there any other root folders that would be OK to move to sdb?
[12:15] <ilovefairuz> ilyekkakai: do you have a plugin that downloads tags from the internet?
[12:15] <phlak_user> tim__ you could move /var /usr
[12:15] <ilyekkakai> ilovefairuz, I don't know.... I will check
[12:16] <ilovefairuz> D4CH: install and use gparted to delete the extra partitions but leave /dev/sda6 alone
[12:16] <Professor_G>  i'm looking at a intro to a flash site  i want to download it to my computer
[12:16] <D4CH> Thank you, I will look in to it :)
[12:16] <Professor_G> flashget doesn't work on this
[12:17] <D4CH> ilovefairuz: Which is my OS? >.<
[12:17] <well_laid_lawn> Professor_G: tried curl?
[12:17] <ilovefairuz> D4CH:  beware that you won't be able to delete the "extended" partition (the grouping on the right) because ubuntu is located inside of it, so if you still want to, you'll have to reinstall ubuntu and select "erase all disk"
[12:17] <well_laid_lawn> !info curl
[12:18] <ilovefairuz> D4CH: it's the one inside the grouping on the right named 36 gb ext4
[12:18] <_raven_> how to compare written cd with iso image?
[12:18] <D4CH> Aha, thanks
[12:18] <Professor_G> well_laid_lawn,  how do i get this
[12:18] <ilyekkakai> ilovefairuz, only plugins I have installed are cover art, DAAP sharing, song lyrics and status icon....... OH Wait! - would DAAP Sharing be somehow stopping the tags from changing if another computer on the network is browsing the files?
[12:19] <ilovefairuz> ilyekkakai: not likely ..
[12:19] <well_laid_lawn> Professor_G:  In component main, is optional - so   sudo apt-get install curl
[12:19] <Amstein> Re all
[12:19] <ilyekkakai> ilovefairuz, I just checked and there are no other computers running any music apps. So yeah, that is not it.
[12:19] <ilovefairuz> ilyekkakai: as a last resort, try jamming it through ffmpeg: ffmpeg -i "filename" -acodec copy out.mp3
[12:19] <xxthink> http://www.pastebin.org/475192
[12:19] <D4CH> ilovefairuz: Can I add it the now unallocated space to my installation of ubuntu, or will I have to boot a live CD to use gparted and do it?
[12:20] <xxthink> the openssh can't be installed
[12:20] <xxthink> why?
[12:20] <xxthink> this is the error msg
[12:20] <FloodBot2> xxthink: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[12:20] <ilovefairuz> xxthink: type all on one line and in detail
[12:20] <paultag> !pastebin | xxthink
[12:20] <ilovefairuz> paultag: cheers!
[12:20] <paultag> ilovefairuz, sure sure
[12:21] <ilyekkakai> ilovefairuz, will that generate a newlt re-encoded copy of the file?
[12:21] <_raven_> how to compare written cd with iso image?
[12:21] <ilyekkakai> newly*
[12:21] <ServerTech2010> can i get the whole ubuntu documentation in one package for printing???
[12:21] <ilovefairuz> D4CH: yes, you'll have to use the live cd
[12:21] <scott1541> How do i make empathy start when ubuntu starts?
[12:21] <KrisDouglas> Hello everyone
[12:21] <D4CH> Oh buggers
[12:21] <ilovefairuz> ilyekkakai: hopefully...
[12:21] <xxthink> http://paste.ubuntu.com/476888/
[12:21] <xxthink> I can't successfully install openssh, this is the error msg
[12:21] <ilovefairuz> !manual | ServerTech2010
[12:22] <KrisDouglas> Is there a way to stop Ubuntu asking for a keyring login on the remote machine when trying to connect over VNC?
[12:22] <ilovefairuz> scott1541: system > preferences > startup applications
[12:22] <scott1541> thanks
[12:22] <Professor_G> right how do i use it
[12:22] <ServerTech2010> umm the whole ubuntu documentation i need for printing
[12:22] <_raven_> how to compare written cd with iso image?
[12:22] <ilovefairuz> ServerTech2010: for what exactly? desktop? server? or even manpages!
[12:22] <vlt> vlt: install qcad-data
[12:23] <ServerTech2010> desktop ubuntu
[12:23] <ServerTech2010> actually its a server PC it is installed on, but for GUI needs, desktop is installed
[12:23] <OerHeks> _raven, check the md5sum ?
[12:23] <OerHeks> https://help.ubuntu.com/community/HowToMD5SUM
[12:23] <ServerTech2010> is that link for me?
[12:24] <xxthink> how to fixed it？
[12:24] <ServerTech2010> oh its not
[12:24] <ServerTech2010> :P
[12:24] <Parsi> how can i mount DSL on USB Flash ?
[12:24] <MartinObviously> lol
[12:24] <ilovefairuz> ServerTech2010: https://help.ubuntu.com/10.04/index.html
[12:24] <Ghostly> when i delete the particion from my hardrive do grub still stay there? and if it does how do i remove it
[12:24] <ServerTech2010> umm i need the whole 10.04 documentation in one single package for printing!
[12:24] <ilovefairuz> Ghostly: delete the partition of ubuntu?
[12:24] <whompapotamus> Ghostly: Edit grub menu list
[12:25] <xxthink> how to fixed the ubuntu??
[12:25] <Professor_G> how do i use curl?
[12:25] <whompapotamus> Ghostly: Remove from fstab
[12:25] <xxthink> are there some automatic methods?
[12:25] <phlak_user> xxthink: that error you get is for gitolite
[12:25] <ServerTech2010> ...
[12:25] <phlak_user> xxthink: not for ssh
[12:25] <ylmf> 有人吗
[12:26] <Professor_G> anyone know
[12:26] <phlak_user> !cn| ylmf
[12:26] <xxthink> ok
[12:26] <ServerTech2010> i want in english :P
[12:26] <ilovefairuz> Professor_G: you'll have to read the html and find the address of what you're trying to download, did you try flashgot ?
[12:26] <phlak_user> Professor_G: this is the best place to start for curl --> http://curl.haxx.se/
[12:27] <Professor_G> ilovefairuz,  yep but it didn't work
[12:27] <qwert666> hi problems with cdrom are common in ubuntu 10.04 ?
[12:27] <alecxx> hello, I followed this howto http://tldp.org/HOWTO/html_single/Debian-Binary-Package-Building-HOWTO/ and would like to generate the .changes file in order to store the file in a repository with reprepro. any idea of it is possible with dpkg-changes and how?
[12:27] <ilovefairuz> !details | qwert666
[12:28] <KrisDouglas> I am having some problems with the remote desktop thing on Ubuntu. For some reason, no matter how many times I remove my keyring, a new one is created when I use connect to server, and it just uses my login password by default, this is fine, but then when i try and access the machine on remote desktop, I can't because it is asking for the login keyring on the remote machine. Is this a bug? anyone know what could be causing it, or how i c
[12:29] <shylockshao> woshiji
[12:29] <shylockshao> hello
[12:29] <ilovefairuz> !hi | shylockshao
[12:29] <North_Italian69> I very love Ubuntu. I use it since 1 year BUT I am tired to update my Favorite programs from tarball/source. Ubuntu it is late of 6 months or more. My impression is that the devopler updates only the testing release. Do you agree wit me?
[12:30] <shylockshao> YES
[12:30] <qwert666> ilovefairuz, ubottu the cd drive is reading the disc at the beginning when i boot ubuntu , after few minutes it stops to react ... i cant reject the drive , the device is in /dev so it`s quite strange
[12:30] <ServerTech2010> i cant download the manual in ubuntu-manual.org
[12:30] <shylockshao> IM AGREE
[12:30] <shylockshao> you are right
[12:30] <North_Italian69> so im not the only one
[12:30] <ilovefairuz> North_Italian69: yes, you'll have to install newer versions of ubuntu if you want latest applications or use debian-testing or achlinux
[12:30] <North_Italian69> has meke me nrmal ;
[12:30] <shylockshao> ubuntu ilike it
[12:30] <North_Italian69> normal ;)
[12:31] <shylockshao> ....you are
[12:31] <ilovefairuz> * archlinux
[12:31] <KrisDouglas> I find that using bleeding edge stuff is not always best, and if I do want to use the latest, I can get it and compile it off the developers website.
[12:31] <shylockshao> archlinux
[12:31] <ilovefairuz> North_Italian69: these distros are "rolling release" they update their applications with newer versions without having to reinstall
[12:32] <North_Italian69> I continuosly try other distros on my second computer
[12:32] <ilovefairuz> qwert666: have you verified the iso after you downloaded and burned it slow?
[12:32] <sacarlson> KrisDouglas: I guess you need too look at the security settings on your remote vnc side
[12:32] <whompapotamus> KrisDouglas: Slackware fo te
[12:32] <ilovefairuz> !verify | qwert666
[12:32] <D4CH> Why would you burn the iso slow?
[12:32] <whompapotamus> KrisDouglas: For the win
[12:32] <North_Italian69> ilovefairuz: how i said, i try 3 realese a week
[12:33] <North_Italian69> ilovefairuz: and the most update on programs
[12:33] <ilovefairuz> North_Italian69: then deal with it, that's how ubuntu works, if you don't like this, use another distro
[12:33] <North_Italian69> ty to gess
[12:33] <phlak_user> KrisDouglas: do you mean that it should allow you to connect to the remote machine without a password?
[12:33] <sacarlson> KrisDouglas:  ya I like to test the bleeding edge stuf with a virtualbox setup and play a bit with it first.  I only upgrade if I have to.
[12:33] <KrisDouglas> scarlson: it is not the security, yes I do have a password set, its just that it asks for my login keyring on the remote machine before i get access, which is stupid
[12:33] <KrisDouglas> yes, i can access it without a password
[12:34] <qwert666> ilovefairuz, yes i`ve verified it
[12:34] <North_Italian69> ilovefairuz: try o gues whichdistro updates costantly the packages?
[12:34] <phlak_user> KrisDouglas: umm, what do you mean by login keyring?
[12:34] <bazhang> !ot | North_Italian69
[12:34] <ilovefairuz> D4CH: for bootable large iso images, burning at high speeds may cause burn errors
[12:34] <KrisDouglas> phlak_user the keyring in gnome stores any passwords on the system safely under a master password
[12:34] <North_Italian69> bazhang: wha is o for you may not be for others
[12:34] <sacarlson> KrisDouglas: well I think that's part of the security settings you can disable passwords and only allow keys.  you have to give us a look at the configs
[12:34] <ilovefairuz> North_Italian69: i've already told you which distros do this: debian-testing and archlinux
[12:35] <llutz> ilovefairuz: urban legend, that only happens if you use crap media
[12:35] <bazhang> North_Italian69, this is NOT the chat channel.  #ubuntu-offtopic for that
[12:35] <ilovefairuz> llutz: so it still happens..
[12:35] <phlak_user> North_Italian69: I agree with bazhang; this is only for support.
[12:35] <North_Italian69> ok
[12:35] <North_Italian69> stop
[12:36]  * D4CH steals ilovefairuz 's knowledge
[12:36] <lucid> hi i have problem i have in my ubuntu preinstalled drivers rt2800usb rt 2870sta and rt2500usb. my wifi device is belkin with chipset rt2870 the thing is that when i plug device just rt2500usb is loaded and i want my dongle to use rt2800usb or rt2870sta driver i tried to blacklist rt2500usb rt2500pci and it doesnt work still cant load rt2870sta or rt2800usb. how to unload rt 2500pci rt2500usb and make my device to use rt280
[12:36] <lucid> 0 or rt2870????
[12:36] <KrisDouglas> No, the settings are correct, the problem is that the keyringhas been disabled by me, and it keeps getting re-enabled when i store details on the "Connect to server" app. This then means my remote desktop doesn't work 'till i delete the keyrings and then reset the password... its never done this before.
[12:36] <North_Italian69> anyway go to chek what verson of gpated we have
[12:36] <KrisDouglas> And it is happening on all 3 of my ubuntu machines
[12:36] <phlak_user> lucid: did you reboot after you added to the blacklist?
 no i just used modprobe rt2870sb
[12:37] <lucid> do i need to reboot?
[12:38] <North_Italian69> ilovefairuz: i think gparted its very important
[12:38] <ilovefairuz> lucid: modprobe -rf modulename and then modprobe [newmodule] and test if it works first, blacklisting is eay
[12:38] <sacarlson> KrisDouglas: maybe just create a new account on your local system and try connect to your remote from that account.  I'm not sure what you could have done.
 i tried modprobe -r rt2500usb than modprobe -r rt2500pci
[12:38] <phlak_user> lucid: after you add the mod to the blacklist, you need to reboot. else, to test, just unload the module and load the rt280 module (modprobe -rv and modprobe -v)
[12:38] <padi999> what is the sed command to remove text after a certain expression like a comma "," with sed?
[12:38] <lucid> and than modprobe rt2870usb
[12:38] <ilovefairuz> North_Italian69: join #ubuntu-offtopic
[12:38] <North_Italian69> ilovefairuz: in moe on theyr web site there is a red warning  about old versions ....
[12:38] <lucid> but device still use rt2500
[12:38] <padi999> until the end of the line
[12:38] <bazhang> North_Italian69, this has nothing to do with Ubuntu support. Please stop
[12:38] <ilovefairuz> lucid: modprobe -rf will force it to unload
[12:39] <North_Italian69> ok
[12:39] <sacarlson> KrisDouglas: but you say you have 3 other local system and all fail.  maybe setup a temp account for me on your remote and let me try it.
[12:39] <kittenvsdinosaur> any recommendations for an alternative to filelight that actually works? I want something that shows a graph of which folders are taking up how much space, with the option to ignore certain folders.
[12:40] <phlak_user> kittenvsdinosaur: computer janitor?
[12:40] <KrisDouglas> Its not account based, and it is also not external. It is just using the "remote desktop" tool in ubuntu. I can't remember it's name, Vino, i think?
[12:40] <qwert666> any clues what could be wrong ? or what to check ... because i don`t know where to start from (the cd drive is working at the beginning after ubuntu restart by few minuts)
[12:40] <ilovefairuz> qwert666: verify the cd not just the iso
 oot@lucid:/home/lucid# modprobe -rf rt2500usb
[12:40] <lucid> root@lucid:/home/lucid# modprobe -rf rt2500pci
  airmon-ng wlan0		Intel 4965/5xxx	iwlagn - [phy0]
[12:41] <lucid> ra0		Ralink 2560 PCI	rt2500
[12:41] <phlak_user> !paste | lucid
[12:41] <qwert666> http://ubuntu.pastebin.com/mLq2Z4Rn
[12:41] <sacarlson> KrisDouglas: yes vino sounds correct give me the version of vino you run and I"ll simulate it
 still loaded rt2500
[12:42] <phlak_user> lucid: paste the output of lsmod
[12:42] <qwert666> ilovefairuz, i don`t want to install the ubuntu from beginning ... the only problem is with the cdrom device so i think it should be fixable ...
[12:42] <ilovefairuz> lucid: sudo apt-get install pastebinit  && lsmod | pastebinit -
[12:43] <ilovefairuz> qwert666: that's an I/O error, pray it's just bad media because otherwise it will be  hardware error
[12:43] <kittenvsdinosaur> phlak_user, too automated for my taste. I was also recommended baobab, but it unfortunately follows symlinks across filesystem borders even when they lead to partitions that I told it not to scan.
[12:43] <DaveSiberia> Hello clever people - I have a problem with the panel in lucid -- all i get is a small white oblong at the top of the page
[12:43] <padi999> In sed, what is the command to delete a line from a certain character until the end of the line?
[12:43] <ilovefairuz> qwert666: use a blank good media, burn slow
 http://paste.ubuntu.com/476899/
[12:44] <ilovefairuz> qwert666: also clean the drive from dust
[12:44] <ilovefairuz> !panels | DaveSiberia
[12:45] <qwert666> ilovefairuz, only recompiling the kernel would help ?
[12:46] <qwert666> i have to much stuff installed and configured to play with the installation from beginning :(
[12:46] <ilovefairuz> qwert666: that wouldn't help at all, a hardware error needs a hardware fix or replacement but it could be just bad/scratched cd
  <phlak_user> did you see it??
[12:47] <ilovefairuz> lucid: sudo modprobe -rf rt2800lib rt2x00usb rt2800usb rt2x00lib
[12:48] <Jungli> i have ubuntu 7.0 but it doesn't update ?
[12:48] <tim__> Hi I'm following https://help.ubuntu.com/community/SettingUpNFSHowTo and trying to get NFS4 setup on client, but when I try to mount I get error mount.nfs4
[12:48] <qwert666> ilovefairuz, i`ve used a pendrive so no scratches were possible and the cdrom is working correctly under windows
[12:48] <tim__> Hi I'm following https://help.ubuntu.com/community/SettingUpNFSHowTo and trying to get NFS4 setup on client, but when I try to mount I get error mount.nfs4: no such device
[12:48] <phlak_user> ilovefairuz: lucid you should first disable wireless by right-clicking and unticking "Enable Wireless" on Network Manager
[12:48] <bazhang> !eol > Jungli
[12:48] <DaveSiberia> ubottu how do I get back to the graphical desktop from the terminal?
[12:49] <DaveSiberia> sorry reposted
[12:49] <bazhang> Jungli, upgrade to a supported version.
[12:49] <ilovefairuz> phlak_user: lucid: sudo ifconfig ra0 down
[12:50] <phlak_user> DaveSiberia: alt+f7
[12:50] <Jungli> thanks bazhang ...
[12:50] <jahil> hi everyone
[12:50] <DaveSiberia> thanks phlak_user
[12:50] <phlak_user> !hi | jahil
[12:50] <lucid> root@lucid:/home/lucid# sudo modprobe -rf rt2800lib rt2x00usb rt2800usb rt2x00lib
[12:50] <DaveSiberia> I now have a cursor but nothing else!
[12:50] <jahil> can i capture youtube audio without soundcard on ubuntu 10.4
[12:50] <lucid> FATAL: Module rt2800lib is in use.
[12:50] <lucid> root@lucid:/home/lucid# sudo modprobe rt2870sta
[12:51] <lucid> airmon-ng
[12:51] <lucid> 	Driver
[12:51] <lucid> wlan0		Intel 4965/5xxx	iwlagn - [phy0]
[12:51] <lucid> ra0		Ralink 2560 PCI	rt2500
[12:51] <FloodBot2> lucid: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[12:51] <phlak_user> DaveSiberia: press alt+f1 to go back to text console
[12:51] <ilovefairuz> lucid: try each one individually and paste pastebin for all output
[12:51] <lucid> ok sorry
[12:51] <phlak_user> DaveSiberia: are you on server or desktop?
[12:52] <tim__> Do i Have to setup hosts.allow with NFSv4?
[12:52] <phlak_user> !nfs
[12:52] <DaveSiberia> phlak_user: my desktop appeared after a wait - now I have a bigger white rectangle at the top of the page but still no menus
 http://paste.ubuntu.com/476902/
[12:53] <ilovefairuz> DaveSiberia: alt + f2 and type: gnome-terminal
[12:53] <tim__> phlak_user: I've been following that guide but I get an error when trying to mount on the client mount.nfs4:no such device
[12:53] <ilovefairuz> DaveSiberia: then try command sin
[12:53] <ilovefairuz> !panels > DaveSiberia
[12:54] <DaveSiberia> sorry ilovefairuz don't understand how to do !panels.
[12:55] <ilovefairuz> DaveSiberia: copy and paste the command after gnome terminal appears
[12:55] <adalal> hey, how would you force logout myself from another remote/local terminal
[12:55] <phlak_user> tim__ have you added the directory to be nfs mounted to the /etc/exports file on the remote server?
[12:55] <dholbach> Packaging Training Session: Patch Review and Operation Cleansweep in #ubuntu-classroom in 5 minutes
[12:56] <DaveSiberia> when I type alt+f1 (or f2) nothing happens cntrl+alt+f1 gets me a login screen to a command line interface
[12:56] <ilovefairuz> lucid: each modprobe -fr for EACH one individually
[12:56] <phlak_user> adalal: kill the bash process that you own
[12:57] <adalal> phlak_user: okay, but what about a gnome-session?
[12:57] <ilovefairuz> DaveSiberia: it's alt + f2 in the graphical desktop, if it doesn't work, switch to ctrl + alt + f1 and: sudo killall -KILL Xorg
[12:57] <tim__> phlak_user: yeah /export       192.168.1.0/24(rw,fsid=0,insecure,no_subtree_check,async)
[12:58] <tim__> Its a NTFS disk does that change anything?
[12:58] <phlak_user> adalal: kill -HUP pid-of-gnome-session
[12:58] <phlak_user> tim__ nope
[12:58] <adalal> phlak_user: thanks
[12:58] <DaveSiberia> ilovefairuz: typing gnome-terminal on the CL gets me an error could not recognise arguments: could not open display
[12:58] <phlak_user> tim__ whats the error you get again?
[12:59] <ilovefairuz> phlak_user: adalal: pkill -HUP gnome-session (not need to find id)
[12:59] <Ghostly> i have a reocurring problem, i acidentaly destroyed the particion with ubuntu on it in windows so i have been trying to reistall but, when i have done so i only get the gnu grub command line and nothing more, from what i can tell the file system is there, my hard drive is set as slave if that makes a difference. any ideas for what i can do?
[12:59] <phlak_user> ilovefairuz: id rather not do that from a remote terminal
[13:00] <tim__> My fedora client gives error: 'export failed, reason given by server: no such file or directory'
[13:00] <ilovefairuz> DaveSiberia: it's for alt + f2 inside graphical desktop, not from crtl + alt + f1 or 2
[13:00] <phlak_user> tim__: ah so the directory wasnt exported properly; you need to check the error at the server first to see why the export didnt happen
[13:00] <ilovefairuz> phlak_user: well yes it assumes only one user is logged in a gnome session
[13:01] <ubuntu> how can i operate ubuntu without keyboard
[13:01] <MartinObviously> Why do you not have a keyboard?
[13:01] <israfel> ubuntu WHy?
[13:01] <phlak_user> ilovefairuz: in my experience, never make assumptions esp if you are say 1000 miles from the machine you are logged in to :)
[13:01] <DaveSiberia> thanks ilovefairuz killing Xorg got me back to a normal login screen and after loging in a normal desktop with panel
[13:01] <glick> ubuntu, a touch screen?
[13:01] <ubuntu> wow.... i mean a=only keyboard
[13:02] <glick> ubuntu, some sort of mind reading device
[13:02] <phlak_user> ilovefairuz: but thats only my opinion
[13:02] <ilovefairuz> Ghostly: if ubuntu is gone, no need for grub, get the windows cd and fix the mbr
[13:02] <ubuntu> i dont have a mouse sorry guys
[13:02] <glick> ubuntu, one of those blow devices that quadrapalegics use
[13:02] <ilovefairuz> phlak_user: and you're right :)
[13:02] <israfel> ubuntu, I think there's some way to control a mouse pointer using the keyboard. Would that work?
[13:03] <ubuntu> show me
[13:03] <ilovefairuz> ubuntu: there are some on-screen keyboards for ubuntu if that's what you're looking for
[13:03] <ubuntu> even shortcuts will do
[13:03] <israfel> ubuntu, not sure where it's located. Haven't had to use it myself.
[13:03] <tim__> anyone know where the nfsv4 server logs are kept?
[13:03] <ubuntu> no my first Question was wrong...
[13:03] <israfel> ububtu, there's plenty of shortcuts available using the terminal.
[13:04] <ubuntu> I mean how can i operate my ubuntu desktop without a mouse
[13:04] <ilovefairuz> !tab | israfel
[13:04] <ilovefairuz> ubuntu: system > preferences > keyboard shortcuts
[13:05] <israfel> ubuntu, found it using google. System -> Preferences -> Universal Access -> Keyboard Accessibility.
[13:05] <ubuntu> i have a hawei  3g wireless modem and I was cannot use my mouse if i plug it in... there is no much room left
[13:05] <Pici> ubuntu: There is a way to enable mouse naviation with the numpad, I think the key combination is alt-shift-numlock
[13:06] <israfel> ubuntu, ilovefairuz had it right. I was looking at an older version.
[13:07] <Ghostly> ilovefairuz: Well im trying to get ubuntu working again but i keep messing up for some reason, i could try fixing the mbr throught windows then install grub again?
[13:07] <israfel> Ghostly, What is messing up on it?
[13:08] <ilovefairuz> Ghostly: if you deleted the partition containing ubuntu, you'll have to re-install it from scratch, you can't fix this
[13:08] <ilovefairuz> Ghostly: only grub is left on your system now
[13:10] <Ddorda1> how do i reinstall a program with all it dependencies?
[13:10] <ilovefairuz> Ddorda1: apt-get install --reinstall packagename
[13:10] <nits> Ddorda1: sudo aptitude install programname , that would be my guess
[13:11] <llutz> both won't reinstall deps
[13:11] <MitchFX> how does one close an unresponsive program in ubuntu? if its dissappeared from my screen but i can still hear it running in the background
[13:11] <Ghostly> ilovefairuz: well have tried reinstalling several times, even deliting the existing particion for the task
[13:11] <ilovefairuz> llutz: the packagename portion can include as many packages as needed to be reinstalled
[13:11] <ilovefairuz> like a normal install
[13:12] <nits> MitchFX: do a top or ps and note the process id , then use kill processid
[13:12] <llutz> ilovefairuz: sure, but you have to find all the deps manually before. sounds its not what he wants
[13:12] <ilovefairuz> MitchFX: what program ?
[13:12] <israfel> Ghostly, The last step of the install, there's an Advanced button. Make sure that it sets the proper partition.
[13:12] <ubuntu-jn> hi everyone
[13:12] <sacarlson> ubuntu: that might be that you 3g draws too much power from your usb +5v.  maybe try if you have other plugs some systems have 2 totaly separarte usb buses.  other option might require you have a usb hub that provides the power to the devices on the external usb hub.
[13:12] <MitchFX> uh... its a game
[13:12] <piercedwater> Can someone tell me what the repository name is for hfsplus and its utilities to get an hfs+ drive to be red/write on Ubuntu?
[13:12] <israfel> Hi ubuntu-jn
[13:13] <deem0n> /j #ubuntu-bg
[13:13] <ubuntu-jn> can any1 teach me how to use this IM client?
[13:13] <trukosh> Hi, ubuntu 10.04 how do i tell upstart to start one sevice (shorewall) after another (libvirt-bin) - is this possible?
[13:13] <ilovefairuz> llutz: ddora1: apt-cache info packagename to find deps .. ah he left
[13:13] <nits> ubuntu-jn: what im client are u using
[13:13] <MitchFX> thanx
[13:13] <Pici> piercedwater: hfsplus is in the main repository.
[13:14] <llutz> ilovefairuz: _I_ know how to find deps, but that wasn't his aim i guess
[13:14] <piercedwater> Pici: under what name? I search for "hfsplus" but nothing cme up
[13:14] <majdekalel> hello guys
[13:14] <majdekalel> can anyone help me in this proxy
[13:14] <majdekalel> i wanna try it
[13:14] <ilovefairuz> llutz: simply copying/appending them to the command will do that trick
[13:14] <Pici> piercedwater: 'hfsplus', What version of Ubuntu and what arch are you using?
[13:14] <majdekalel> www.echostech.com/writer/x/
[13:14] <piercedwater> Pici: Ubuntu Server 10.04 i386
[13:14] <Pici> majdekalel: This channel is only for Ubuntu support.
[13:15] <majdekalel> oh man ok
[13:15] <Ghostly> ilovefairuz:ok i will try that
[13:15] <majdekalel> i have a question about ubuntu
[13:15] <Pici> piercedwater: Then it should definitely be there.  hfsplus | 1.0.4-12build3 |         lucid | source, amd64, i386
[13:15] <ubuntu-jn> am pidgin
[13:15] <majdekalel> is there any GUI tool for PPPOE ?
[13:15] <ubuntu-jn> latest version of pidgin
[13:16] <tim__> phlak_user: If I  type mount on the server It lists /media/cavern mounted on /export/cavern type none (rw, bind)
[13:16] <majdekalel> hi pici
[13:16] <Pici> majdekalel: Hi.
[13:16] <piercedwater> Pici: Is that the only package I need to mount and read/write hfs+ drives in Ubuntu?
[13:16] <nits> ubuntu-jn create an irc account using manage accounts
[13:16] <majdekalel> pici i need gui tool for pppoe
[13:16] <nits> ubuntu-jn: then join a chat room using buddies->join a chat from that account
[13:18] <israfel> majdekalel, Isn't there one built into the GUI?
[13:18] <Pici> piercedwater: Looks like it.  It also looks like it has its own executables, like hpmount.
[13:18] <ubuntu-jn> nits: i did that olredi thats basically why am able to chat you guys now.. wat i want to do is to chat my friends who are using yahoo mssgr.. so hw can i do that?
[13:18] <majdekalel> no
[13:19] <majdekalel> you mean pppoeconf command
[13:19] <cryptk> hello, I have a system that is failing to boot... I have added --debug to grub to try and debug it... here is the boot log http://ubuntu.pastebin.com/nRyG7ieh
[13:19] <ilovefairuz> ubuntu-jn: in manage accounts, select add and then account type
[13:19] <Lazydude> for sure.  now all my cpus in the house only have linux installed except for one.
[13:19] <cryptk> the last line in the boot log is init: mountall main process (192) executable changed
[13:20] <cryptk> if anyone could shed any light at all it would be great
[13:20] <cryptk> this happened right after an update from 8.04 to 10.04
[13:20] <israfel> majdekalel, So there's no network manager?
[13:20] <Lazydude> what windows manager does ubuntu use again?
[13:20] <cryptk> I have not been able to get it to boot after the update
[13:20] <majdekalel> yes there is
[13:20] <israfel> majdekalel, alt-F2 then run 'nm-applet'
[13:20] <majdekalel> but how i can configure PPPOE
[13:21] <ilovefairuz> cryptk: here's a tip: when searching for an exact string in google but something changes (like a process id) use *: so that would be "mountall main process (*) executable changed"
[13:21] <cryptk> ilovefairuz: I have tried that...
[13:21] <OerHeks> majdekalel, maybe this page is any help > https://help.ubuntu.com/community/ADSLPPPoE
[13:21] <ubuntu-jn> ilovefairuz: i did accounts>manage>add but theres no such thing as acc type
[13:22] <katoen> how to i configure my WPA2 personal settings in /etc/network/interfaces?
[13:22] <israfel> majdekalel, Here's something google found. http://www.ubuntugeek.com/how-to-setup-networkmanager-work-with-pppoe-connection-on-ubuntu-9-10-karmic.html
[13:22] <m3F> Hi!
[13:22] <israfel> majdekalel, Might work with 10.04
[13:22] <m3F> I have a problem trying to play music with Amarok in Ubuntu Karmic
[13:22] <m3F> here is the output: http://pastebin.ca/1915699
[13:23] <ilovefairuz> ubuntu-jn: called "protocol"
[13:23] <majdekalel> thank israfel that what i was looking for
[13:23] <Parsi1> is israfel kind of israel?
[13:23] <m3F> It looks like there is a problem with the Amarok network access
[13:23] <majdekalel> israfel you have strange name
[13:24] <israfel> majdekalel, Thanks. lol
[13:24] <majdekalel> are you muslim ?
[13:24] <israfel> majdekalel, Nope. Long story though
[13:25] <ilovefairuz> !ot | majdekalel
[13:25] <majdekalel> coz this name is the name of the angle who give the life .
[13:25] <tobiasz> this gwibber thing doesn't work for shi-
[13:25] <majdekalel> oh yah
[13:26] <majdekalel> i have a problem in mount command
[13:26] <ubuntu-jn> i have a question.. if you add account to pidgin that account shud be existing? i mean shud that account be my friends' accounts?
[13:26] <majdekalel> i use it virtual box .
[13:26] <ilovefairuz> ubuntu-jn: no, your own username and password, it will fetch your friend list like in yahoo messenger
[13:26] <majdekalel> when i try to mount the .iso package for additional support it says " mount error "
[13:27] <john38> theirs return to castle wolfenstein free linux version
[13:27] <cryptk> full error message please
[13:27] <kiamo> Hi
[13:27] <ilovefairuz> !hi | kiamo
[13:27] <israfel> majdekalel, Do you have the proper software to mount it as a CD/DVD drive?
[13:27] <kiamo> are their any known updates that causes gnome to crash periodicly, that came out in the last few days?
[13:28] <majdekalel> i cant see the mount command
[13:28] <cryptk> ok, adding the --debug to grub again, this time in normal mode, it seems to do a bit more..
[13:28] <cryptk> I see some job_class_registers and then it hangs again
[13:28] <john38> return to castle wolfenstein free linux version !!
[13:28] <llutz> !ot > john38
[13:28] <israfel> majdekalel, You're trying to mount an .iso as a CD ROM drive
[13:28] <majdekalel> yes
[13:29] <majdekalel> yes israfel
[13:29] <amr_> please can any one see the synaptic history and tell me tha names of packages that was updated since sat 7 aug 2010 .. i need them badly as i removed my install and one of the updates make google chrome not work ?
[13:29] <john38> llutz, what?
[13:29] <ubuntu-jn> ilovefairuz: aah alright so after adding account (my account w/ yahoo as protocol) what to do next? how can i chat my friends now?
[13:29] <israfel> majdekalel, Use gmount-iso. "sudo apt-get gmountiso"
[13:29] <ilovefairuz> amr_: removed what?
[13:29] <OerHeks> amr_ re-install google chrome is faster
[13:29] <Pici> john38: Do you have an Ubuntu support question?
[13:30] <john38> no
[13:30] <amr_> ilovefairuz, my install and did a reinstall again of ubunt 10.04.1 daily .
[13:30] <ilovefairuz> ubuntu-jn: it did not auto-connect? check accounts > [account] > enable
[13:30] <Pici> john38: Well, this channel is only for Ubuntu support, for general chatter, you can join #ubuntu-offtopic (guidelines still apply)
[13:30] <majdekalel> you mean apt-get install gmountiso ?
[13:30] <israfel> majdekalel, oops, forgot the "install" part
[13:30] <amr_> OerHeks, ried that but it's not a google chrome problem on my machine as after installing again the same problem occurs \
[13:30] <majdekalel> ok i did it
[13:31] <majdekalel> and then what  ?
[13:31] <ubuntu-jn> ilovefairuz: it did
[13:31] <israfel> majdekalel, That should give you a nice little gui to mount isos.
[13:31] <amr_> please i just want the history of synaptic in the last 6 days
[13:32] <majdekalel> what i have to put in "mount point" ?
[13:32] <israfel> majdekalel, use /cdrom
[13:32] <ilovefairuz> amr_: it's not clear what have you exactly removed.
[13:32] <ilovefairuz> amr_: check apt and dpkg logs in /var/log
[13:33] <BChow> how to get PCSX bios?
[13:33] <BChow> how to get PCSX2 bios?
[13:33] <majdekalel> ok israfel i did that
[13:34] <majdekalel> but i cant reach the cdrom ?
[13:34] <israfel> majdekalel, Does it show up under Places?
[13:34] <stephensp> Running 10.04 - My Notification Area stopped showing on my top bar but instead is now showing as an app option in my bar on bottom screen. Any idea how to fix?
[13:34] <majdekalel> no
[13:34] <israfel> majdekalel, Let me check mine quick
[13:34] <majdekalel> ok
[13:35] <nosa-j> hay my dell vostrio 1000 has a problem with its card reader in unbuntu it shows how big the memory card is but it can't wright to it or format it
[13:35] <majdekalel> by the way i'm trying to mount VBoxGuestAdditions_3.1.6.iso
[13:36] <majdekalel> ok i see it now
[13:36] <Jinxed-> does anyone know how to get mjpg_streamer
[13:36] <tobiasz> where are gwibbers settings?
[13:36] <tobiasz> I mean folder
[13:36] <majdekalel> you mean mpg_streamer ?
[13:37] <israfel> majdekalel, Ok. I just realized that mounting my 4GB DVD iso over the network would take a long time.
[13:37] <majdekalel> israfel i did that
[13:37] <majdekalel> its ok now
[13:37] <nosa-j> i can get the sd card to show in the device manager ubuntu uses but other than that no go
[13:37] <nosa-j> o0
[13:37] <majdekalel> another question
[13:37] <majdekalel> how can i use VB6 for windows on ubuntu ?
[13:37] <majdekalel> do i have to use virtual box for this ?
[13:37] <majdekalel> or i can use wine ?
[13:38] <israfel> majdekalel, Is that an IDE for VB6 for Linux? I think there is.. Unless you want a windows IDE>
[13:38] <llutz> !appdb > majdekalel  look here to find out if it runs with wine
[13:38] <cryptk> anyone have any help with my boot problem?
[13:38] <cryptk> I noticed some bad scripts for ureadahead in /etc/init/
[13:38] <cryptk> ureadahead was not installed so I removed them
[13:39] <majdekalel> i saw it
[13:39] <majdekalel> thank you man
[13:39] <majdekalel> hi israfel open Private
[13:39] <kiamo> what is the difference between google chrome and chromium browser?
[13:39] <lelle> how do i create/give an access point to my wireless?
[13:40] <ilovefairuz> lelle: hostapd + dnsmasq
[13:40] <abhijit> !wifi | lelle
[13:40] <kiamo> I see to have both installed, they run seperately have slightly different version numbers, and the icons are different colours...
[13:40] <lelle> kiamo i think google chrome is using all your surfing data for private profit... aka spyware
[13:40] <ilovefairuz> kiamo: chrome = chromium + google branding
[13:40] <kiamo> i thought it was all made by google anyway
[13:41] <tobiasz> why doesn't gwibber render the facebook page at all for me?
[13:41] <ilovefairuz> kiamo: it indeed is, both are google projects
[13:41] <abhijit> & I thing chromium is foss?
[13:41] <kiamo> o_O
[13:41] <kiamo> why would they have 2 versions?
[13:41] <ilovefairuz> abhijit: both are Free sofware, chrome is just branded and pre-compiled
[13:41] <walilo> how could i make free download manager running on ubuntu
[13:42] <abhijit> ilovefairuz, not ffree. i mean open source?
[13:42] <ilovefairuz> abhijit: Free as in speech
[13:42] <abhijit> !dev | walilo
[13:42] <ilovefairuz> abhijit: http://www.gnu.org/philosophy/free-sw.html
[13:42] <abhijit> ilovefairuz, IE is free. but its not open source
[13:43] <lelle> ilovefairuz: dnsmasq: failed to create listening socket: address already occupied
[13:43] <ilovefairuz> abhijit: there's free as in speech and free as in gratis/no cost, read the link
[13:43] <abhijit> ilovefairuz, ok
[13:43] <ilovefairuz> lelle: do you have a dns server running? sudo netstat -plnt
[13:43] <BChow> why i my usb flash disk can't mount if have an usb modem?
[13:44] <lelle> ilovefairuz: dont know what to look for... pastebin?
[13:44] <ilovefairuz> lelle: yeap
[13:45] <lelle> ilovefairuz: http://pastebin.com/g0GYamKL
[13:45] <watyyy> hey everybody! i need some help with ubuntu? if you can help me, please do! :D
[13:46] <ilovefairuz> dnsmasq was already started when you installed it so it's bound to the port
[13:46] <phlak_user> !ask | watyyy
[13:46] <ilovefairuz> lelle: now configure it: sudo nano /etc/dnsmaq.conf
[13:46] <phlak_user> watyyy: no pm please; ask in mains
[13:46] <abhijit> !pm
[13:47] <ilovefairuz> phlak_user: i suggest using !details, it's often easier to understand
[13:47] <lelle> ilovefairuz: empty fyi
[13:47] <coz_> !details
[13:48] <sebastiaan> I've just intstalled 10.04 and it's really fast :-)
[13:48] <watyyy> okay, you see the problem is... i tried to install ubuntu, but when i opened it, and it was installing, it came up with an error, it said i was missing some root system file or something?
[13:48] <ilovefairuz> lelle: check if there's a directory with its name in etc
[13:48] <m3F> ya pues help!!!!!!!!!!!
[13:48] <philinux> watyyy: did you check the cd for defects
[13:48] <lelle> ilovefairuz: /etc/dnsmasq.d but with only a readme file in it
[13:49] <sebastiaan> Maybe it didn't find a hdd
[13:49] <watyyy> i have no cd... i mounted it and installed from there
[13:49] <skunkworks> I agree on 10.04 speed - bootup is very fast.  On one of my installs - the bios splash screen is on as long as ubuntu takes to boot.
[13:49] <philinux> watyyy: did you check the md5sums
[13:49] <sebastiaan> Uhu!
[13:49] <watyyy> and that is?
[13:49] <tobiasz> gwibber doesn't show facebook
[13:50] <sebastiaan> Before I had Fedora 13 but my Ubuntu 10.04 boots like... instant
[13:50] <tobiasz> it does add feeds but doesn't show facebook page
[13:50] <ilovefairuz> lelle: ah it's  /etc/dnsmasq.conf, well create  it, and man dnsmasq for available options or check the website for samples
[13:50] <nosa-j> :D
[13:50] <m3F> Amarok does not work on Ubuntu Karmic (gnome). See: http://pastebin.ca/1915699
[13:50] <ilovefairuz> lelle: what are your network interfaces? pastebin: ifconfig
[13:50] <UbuntuN00b> Hi guys, i installed ubunti from windows via wubi.  I have a pentium but for some reason it downloaded the amd64 version.  Everything seems to work, but if i download things for the i386 architecture they won't run.
[13:51] <UbuntuN00b> Not sure if i should reinstall another arch or not worry :D
[13:51] <lelle> ilovefairuz: http://pastebin.com/8eHACepM
[13:51] <philinux> !md5sum
[13:51] <watyyy> !md5sum
[13:51] <ilovefairuz> lelle: eth0 has internet access, right?
[13:51] <kiamo> has anyone heard of an external monitor causing gnome to freeze up periodically?
[13:51] <lelle> ilovefairuz: = cable? yes
[13:52] <kiamo> I'm not convinced thats the problem, just trying to think of possibilities
[13:52] <walilo> who could make  free download manager running on wine
[13:52] <watyyy> okay, you see the problem is... i tried to install ubuntu, but when i opened it, and it was installing, it came up with an error, it said i was missing some root system file or something?
[13:52] <iflema> !mint | m3F
[13:52] <ilovefairuz> lelle: is there something in /etc/defaults/dnsmasq ?
[13:52] <BChow> How to get Indosat data card
[13:53] <llutz> walilo: ask at #winehq
[13:53] <sebastiaan> There's no PAE in ubuntu?
[13:53] <watyyy> okay, you see the problem is... i tried to install ubuntu, but when i opened it, and it was installing, it came up with an error, it said i was missing some root system file or something?
[13:53] <bazhang> sebastiaan, sure there is
[13:53] <Kangarooo> bug 1
[13:53] <lelle> ilovefairuz: no such catalogue
[13:53] <bazhang> sebastiaan, linux-generic-pae will pull in the necessary items
[13:54] <sebastiaan> okay
[13:54] <ilovefairuz> lelle: ok use the following for /etc/dnsmasq.conf : http://pastebin.com/v9CmTPAF  .. note that your wireless network will be 192.168.2.x
[13:54] <amr_> please  i want the packages list  updated since sat 7aug 2010 in ubuntu plz
[13:54] <amr_> from synatpic
[13:54] <sebastiaan> Oh I see
[13:54] <watyyy> please help me!!! okay, you see the problem is... i tried to install ubuntu, but when i opened it, and it was installing, it came up with an error, it said i was missing some root system file or something?
[13:54] <jason_> Is there a Pdf Fix to print PDf from Mozilla
[13:54] <jason_> not working
[13:55] <ilovefairuz> lelle: now pastebin: lshw -C network .. we'll configure hostapd next
[13:55] <sebastiaan> bazhang, now I see, ty
[13:55] <lelle> ilovefairuz: should i it in sudo?
[13:55] <ilovefairuz> ilovefairuz: doesn't matter
[13:55] <bazhang> sebastiaan, welcome
[13:55] <walilo> llutz, thank you
[13:55] <ilovefairuz> lelle: doesn't matter (i'm so sleepy lol)
[13:55] <watyyy> please help me!!! okay, you see the problem is... i tried to install ubuntu, but when i opened it, and it was installing, it came up with an error, it said i was missing some root system file or something?
[13:56] <lelle> ilovefairuz: http://pastebin.com/mpCr9rAb
[13:56] <cryptk> ok, now I can't umount a folder because getty is using it
[13:56] <amr_> please can any one here help me and post the packages list updated since sat 7 aug 2010 from synatpic history i need them very much
[13:56] <Jinxed-> does anyone have any background with mpeg_streamer?
[13:56] <om26er> amr_, what is the exact problem you are facing?
[13:56] <Jinxed-> sorry mjpg_streamer
[13:56] <ilovefairuz> lelle: aaah it's a broadcom, i'm not sure of this supports master mode (needed for access point) let me check
[13:56] <watyyy> please help me!!! okay, you see the problem is... i tried to install ubuntu, but when i opened it, and it was installing, it came up with an error, it said i was missing some root system file or something?
[13:57] <bazhang> !helpme | watyyy
[13:57] <om26er> watyyy, the full error message would be really helpful for anyone to help
[13:57] <Jinxed-> !mjpg_streamer
[13:57] <abhijit> !factoid | Jinxed-
[13:58] <amr_> om26er, after update my google chrome not working i did install 10.04.1 daily it don't work either but 10.04 works without updates and every thing was ok untill last sat so please i need the package list please i did a resinatll and i don;t have them please help me and post the packages list from synaptic history
[13:58] <abhijit> Jinxed-, what is your question
[13:58] <lelle> ilovefairuz: hmm it seems you asked me to open /etc/dnsmaq.conf forgotting the s before q... and that file is full of stuff
[13:59] <ilovefairuz> lelle: delete it  and use the config i gave you
[13:59] <Jinxed-> abhijit, Im trying to connect my webcam to zoneminder and haven't had any luck. I read about using mjpg_streamer, but it doesn't appear that i have it, even though it said i should
[13:59] <watyyy> i tried to install ubuntu, but when i opened it, and it was installing, it came up with an error, it said i was missing some root system file or something? the message is "No root system file is defined. Please correct this from the partitioning menu."
[13:59] <om26er> amr_, daily ppa have chromium. download google chrome from their own website and install it. so that if there are any problems with chromium they wont be in chrome
[13:59] <zxy_64> hi,
[14:00] <om26er> amr_, google.com/chrome
[14:00] <xangua> amr_: 10.04.1 daily ¿¿¿
[14:00] <om26er> chromium daily build for ubuntu 10.04.1
[14:00] <zxy_64> i need to set the ssh service to start at boot. which file do i need to change to do this?
[14:00] <zxy_64> on ubuntu ^
[14:01] <xangua> amr_: then uninstall the daily chromium version and install stable
[14:01] <evud> Hello. When I do apt-get update i get the following errors: http://pastebin.com/Xa63D21Z , here is my sources.list file: http://pastebin.com/2L49ZbCn . Any ideas on what should I delete, add, or fix in the sources.list file so I can I use the apt-get command?
[14:01] <amr_> om26er, i just want the package list plz i did all that i have been doing installs and reinstalls since saturday plz help me and just post the packages list that was updated since saturday plz don't make be beg you
[14:01] <watyyy> i tried to install ubuntu 10.04 LTS, but when i opened it, and it was installing, it came up with an error, it said i was missing some root system file or something? the message is "No root system file is defined. Please correct this from the partitioning menu." /im a big noob, so please try to explain so i can understand/ :D
[14:01] <abhijit> Jinxed-, does this help? http://skillfulness.blogspot.com/2010/03/mjpg-streamer-documentation.html
[14:01] <abhijit> !repeat | watyyy
[14:01] <mkm> hello
[14:02] <om26er> watyyy, aha
[14:02] <om26er> watyyy, you did custom partitioning?
[14:02] <MaRk-I> Jinxed-: http://viktorpetersson.com/2010/05/23/how-to-install-zoneminder-1-24-2-on-ubuntu-10-04-lts-server/
[14:02] <watyyy> om26er, maybe?
[14:03] <om26er> watyyy, http://news.softpedia.com/news/Installing-Ubuntu-10-04-LTS-141550.shtml
[14:03] <lelle> ilovefairuz: you still awake? lol
[14:03] <galvao> Caros Amigos,
[14:03] <galvao> sou usuario novo do Ubuntu, e a minha curisidade e grande de conhecer o maximo deste sistema para tentar abandonar o mais rapido o windows. Sendo assim estou pesquisando e ate abusando em mexer no meu ubuntu e acabei modificando a inicializacao que agora so aparece texto e nao mais a abertura original do Ubuntu 10.04 que e  a minha versao. O que fiz foi acompanhar conf esta neste site http://dicas-de-linux.blogspot.com/2010/07/alterando-tema-do-plymouth-
[14:03] <galvao> no-ubuntu.html?showComment=1281616981675_AIe9_BGk5a9HCxHDJuaSPd18LGjeQ5bMWcarhYJA23PAepL2xau2n0naIT6sqDwPv9SsW6Ba3K9V2Luhi6eHcxe8pWA1LgpIXYpZjjv4v6qIay_KYmwHADB57fmQOMkeZGJ-a9oRq5p5RKXky7j96QV1v_nhsO43184G5WAzdmGMBjVefk15kg2z8iP89KINd3xv-ujvpJjoFVH7P0_VlwUWlnerYmsaHvXLZ8xvE2-S-eXiknU-0aRX6TV2lxQbDYV-MRATeLDC7buna9TKoZ0aXmzMiFB43bBhuJUfHEgSE_zISVHC_UeEfCCWppryoWYKx85KlyRTY3k12RewaU1QaW7neE066MxaX3hbevPXGgD_BELLBIaG7i5RbiTUtnrssH4dpVytS8uN_9VDJPB9wHq_TsSEBX
[14:03] <FloodBot2> galvao: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[14:03] <galvao> LRJooNxbpifC0M1Ow_ON0xcHUOnp-ejgXEiKyjgxEbIpbyZWEHoxPu8ptz8v0WLJplg0wAGVpdklt7brMkfQ3-bynNOvF82M5xsiyggm_wm3TCOMMrSU24RT_GNqDOZO0V_reN8M0U8VkdMZsu-SE#c3308597488204004280 e nao consigo restaurar o tema de inicializacao.
[14:03] <ilovefairuz> lelle: lol yes, trying to find if hostapd somehow supports this chip
[14:03] <amr_> please it's not much to ask you just look at synaptic history and tell me the packages name that was updated since saturday ... please
[14:04] <abhijit> i cant look in synaptic. i am in non-sudo account. :P
[14:04] <abhijit> :D
[14:04] <xangua> amr_: if you want chromium work why not use stable¿ did you try ppa-purge¿
[14:05] <om26er> amr_, open a terminal type chromium-browser and press enter and pastebin the error it gives
[14:05] <amr_> xangua, please i tried all that even a reinstall of ubuntu and format ... but after update it don;t work but i got too many updates please help me
[14:05] <watyyy> om26er, when im done with test your keyboard it dosnt come up with options on the partitions menu? i cant do anything?
[14:05] <om26er> !pastebin | amr_
[14:05] <OerHeks> amr_, fixing chrome, re-install should do the trick
[14:05] <amr_> om26er, please i just want the packages name
[14:05] <amr_> OerHeks, i just want the packages names
[14:05] <philinux> amr_: In synaptic File>History
[14:05] <om26er> amr_, chromium-browser
[14:05] <amr_> philinux, i did a reinstall and i don't have them nay more
[14:05]  * om26er dont have 10.04
[14:05] <amr_> please
[14:05] <OerHeks> amr_ too many updates .. ?? the updates could resolve your problem !
[14:06] <watyyy> om26er, when im done with test your keyboard it dosnt come up with options on the partitions menu? i cant do anything?
[14:06] <xangua> amr_: reinstall¿¿ what exactly doesn't work¿
[14:06] <amr_> OerHeks, or add problems that makes me hate my self
[14:06] <philinux> amr_: what do you want to do
[14:06] <amr_> philinux, downgrade those upodates
[14:06] <galvao> paste.ubuntu.com
[14:06] <abhijit> galvao, in the browser.
[14:06] <ilovefairuz> lelle: doesn't seem to be possible (your card is using a windows driver with ndiswrapper) you'll have to use a card that has a native driver that supports access mode or find a native driver for the card you already use... let me check that
[14:06] <om26er> watyyy, use the option install side by side
[14:07] <kiamo> could my usb hdd be freezing gnome?  My rhythmbox library is on it so it's constantly being watched.
[14:07] <om26er> watyyy, is there any other OS installed on your computer? e.g. windows?
[14:07] <MaRk-I> !br | galvao
[14:07] <watyyy> om26er, yes
[14:08] <om26er> watyyy, start windows, insert ubuntu cd, open the cd and double click on 'wubi' its the simplest way of installing ubuntu
[14:08] <xangua> amr_: what updates¿ chromium daily ppa¿¿
[14:08] <watyyy> om26er, i have win 7 and win vista... and i want to overwrite my vista with ubuntu...
[14:08] <om26er> watyyy, oh.. hmm
[14:08] <watyyy> om26er, yea but thats not the problem... the problem is when i boot ubuntu it comes up with that error and i cant do anything? there are no options...
[14:09] <ilovefairuz> lelle: what ubuntu version are you using?
[14:09] <om26er> watyyy, when you go to 'specify partitions manually (advanced)'
[14:09] <zxy_64> found it: update-rc.d ssh enable
[14:09] <amr_> xangua, i use the stable ppa
[14:09] <watyyy> om26er, where do i do that? when im installing or when im booting?
[14:09] <amr_> xangua, why don;t you just post it here or in pastebin
[14:09] <om26er> watyyy, there select the window vista partition and make it '/' partition and format it as ext4
[14:10] <om26er> watyyy, when you start the install setup
[14:10] <ilovefairuz> lelle: the card seems to have a native driver with access point mode (b43) but only in lucid?
[14:10] <xangua> amr_: you just said you use the daily ppa
[14:10] <xangua> ¿¿
[14:10] <om26er> watyyy, this http://i1-news.softpedia-static.com/images/extra/LINUX/small/ubuntu1004installation-small_004.png
[14:10] <watyyy> om26er, okay ill try again...
[14:11] <amr_> xangua, i use ubuntu 10.04.1 daily ISO and the google chrome stable ppa and i just need the packages from you synaptic history please
[14:12] <om26er> amr_, different updates come, every day for different systems, for example one is using many ppas
[14:12] <mrpinkfox> Hi there, does anyone knows how to install all the way Sims 2 with wine
[14:12] <lelle> ilovefairuz: back.. im using linux mint 9 which is based on 10.04
[14:12] <bazhang> mrpinkfox, check the appdb and join #winehq
[14:12] <bazhang> !appdb > mrpinkfox
[14:12] <OerHeks> amr_, you don't want to install updates, now it's broken, how would you fix this with OLD updates you allready have included in 10.04.1 ?
[14:12] <om26er> amr_, but as ubuntu 10.04.1 is set to release real soon there are *very* little updates and quite possibly there has been no update that could concern chromium
[14:12] <CkhiKuzad> can i set it so my account, which isnt root, can use apt without sudo?
[14:13] <ilovefairuz> lelle: you need to install the bcmwl-kernel-source driver instead of ndiswrapper
[14:13] <watyyy> om26er, you still here?
[14:13] <om26er> amr_, if you are using google chrome and have problem then install chromium-browser from software center, both are same
[14:13] <om26er> watyyy, ;)
[14:13] <watyyy> om26er, okay when i mounted to ISO, it came up with 2 options... install dome and full, or install inside windows?
[14:14] <lelle> ilovefairuz: ive been there and i still had no access point, but i can try it again, probably easier just to make fresh install, will take like 40 minutes lol
[14:14] <watyyy> om26er, sorry when i mounted the ISO
[14:14] <mrpinkfox> About  #winehq, i'm new there and don't know how to get into appdb ?
[14:14] <om26er> watyyy, install inside windows will not harm anything from your system
[14:14] <om26er> watyyy, and will simply install ubuntu
[14:14] <pgadmin> anybody here used pgadmin?
[14:15] <watyyy> om26er, okay... now i just reboot and see what happens?
[14:15] <ilovefairuz> lelle: use ubuntu
[14:15] <ilovefairuz> !mint > lelle
[14:15] <DarkSector> mrpinkfox, appdb is accessible on the internet, google appdb
[14:15] <om26er> watyyy, yes, after you complete the little install wizard ;)
[14:15] <watyyy> okay
[14:15] <jens_> Hi! :) Does anyone know how to play a sound when the mouse is clicked? :)
[14:15] <bazhang> !appdb | mrpinkfox
[14:15] <lelle> ilovefairuz: hmmm ok
[14:15] <pgadmin> when u want create a server on pgadmin i always type a wrong password
[14:15] <ilovefairuz> lelle: i can help getting it setup on ubuntu but i don't know about mint
[14:15] <bazhang> mrpinkfox, its a website linked above
[14:16] <CkhiKuzad> is it possible to make it so i dont have to use sudo for apt?
[14:16] <om26er> CkhiKuzad, sudo su
[14:16] <candeller> hi, hi would I hide a popping out terminal that runs in a background of an application?
[14:16] <Monkey_Dust> lelle: what's your mint question?
[14:17] <om26er> candeller, explain..?
[14:17] <CkhiKuzad> om26er, thats not what i want to do. i want to edit my permissions so i dont have to type out 5 more characters
[14:17] <ilovefairuz> lelle: assuming the b43 driver supports one of hostapd's interfaces  lol
[14:17] <amr_> please can any one just look at snaptic history and post the updates since last saturday ........ ubuntu 10.04
[14:17] <charmer> CkhiKuzad: you can, but I highly suggest against doing so. it is there for security purposes.
[14:17] <ilovefairuz> !mint > Monkey_Dust
[14:17] <CkhiKuzad> charmer, i am the only one who uses this computer. how do i change it?
[14:18] <Monkey_Dust> ilovefairuz: lelle has the question, not me
[14:18] <bazhang> Monkey_Dust, and its offtopic here
[14:18] <ilovefairuz> Monkey_Dust: we don't offer mint support here
[14:18] <amr_> 1490 users and no one want to help me ... please i just need the list of updates only 1490 user all have them in synaptic history  please i just want the packages names only
[14:19] <candeller> om26er for example. If I type 'vlc' in the terminal, the GUI appears, but the terminal stays there as well, if I close the terminal, the application exists as well, how would I eliminate that step? Like doing some kind of a shortcut, etc.
[14:19] <om26er> CkhiKuzad, might help http://www.ubuntugeek.com/how-to-disable-password-prompts-in-ubuntu.html
[14:19] <lelle> Monkey_Dust: no problem i will reinstall ubuntu itll only take 30 minutes
[14:19] <iceroot> amr_: ls on /var/cache/apt/ and compare the date
[14:19] <CkhiKuzad> candeller, you can stop that by right clicking the panel, and creating a new launcher, put the launcher's command to the program you want to run.
[14:20] <CkhiKuzad> otherwise the terminal has to run
[14:20] <ilovefairuz> lelle: yessss! it supports nl80211 so supposedly it work fine fine with hostapd, so you need to use that driver instead of ndiswrapper
[14:20] <amr_> iceroot, i did a reinstall of ubuntu
[14:20] <Aurora> What works
[14:20] <Aurora> Installation
[14:20] <Aurora> Launching the game
[14:20] <Aurora> Switching the screen resolution for the game
[14:20] <FloodBot2> Aurora: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[14:20] <candeller> CkhiKuzad thanks
[14:20] <charmer> CkhiKuzad: you can write a simple shell script and use an alias to do it. so you could type "install <name_of_package>" and it would do th work for you
[14:21] <lelle> ilovefairuz: sweet... now ill install ubuntu
[14:21] <lelle> ilovefairuz: "brb"
[14:22] <philinux> Anyone good with shell scripts I have a chroot problem
[14:22] <jens_> oes anyone know how to play a sound when the mouse is clicked? :)
[14:22] <CkhiKuzad> charmer, i am not that good at with shell scripts
[14:23] <om26er> jens_, yes, click on the sound icon, click sound preferences, a window will open there is a check box 'enable window and button sounds'
[14:24] <charmer> CkhiKuzad: look at the link that om26er posted for you. it might do the trick.
[14:24] <CkhiKuzad> charmer, its not what i want to do. i just want it to work for apt.
[14:24] <jens_> om26er: Yes but it wont enable mouse click sound??
[14:25] <ServerTech> hello, one of my SSH users is accessing my server. How can i see what he does?
[14:25] <ymfl>  在家好
[14:25] <andyn> !zh | ymfl
[14:25] <andyn> !jp | ymfl
[14:25] <gnuyoga> ServerTech: that will be man in the middle :D
[14:25] <ServerTech> ??
[14:25] <ServerTech> wht
[14:25] <ServerTech> i want to see what he does
[14:25] <bazhang> !test
[14:25] <ServerTech> like he said something like screen
[14:25] <charmer> CkhiKuzad: then a shell script is exactly what you need. it is a very simple one, and a few google searches could teach you how to put it together.
[14:26] <ServerTech> screen in root does not work
[14:26] <gnuyoga> ServerTech: best way is to join his screen session, screen -x
[14:26] <ServerTech> how?
[14:26] <ServerTech> screen is not working in root
[14:26] <lelle> ilovefairuz: i rebooted the computer to make mint see my usb drive so i could use usb-creator-gtk on it, but now the network manager does wierd blinking crap at top right corner "connection establised" one second with the wlan connection icon and "connection disconnected" the other time..
[14:26] <ymfl> 大家好
[14:27] <bazhang> ymfl, this is english only
[14:27] <bazhang> ymfl, /join #ubuntu-cn
[14:27] <ilovefairuz> lelle: sudo apt-get autoremove hostapd dnsmasq
[14:27] <ymfl> I english is so so
[14:28] <lelle> ilovefairuz: is it needed? if ill make a fresh install anyway
[14:28] <ilovefairuz> lelle: hostapd takes over the  wlan
[14:28] <ilovefairuz> lelle: well ok then
[14:28] <ServerTech> someone can tell me how to use "screen"
[14:29] <intel> I am not being able to play youtube video in firefox
[14:29] <ymfl> 怎么没人和我说话?
[14:29] <crankyadmin> ServerTech, man screen
[14:29] <intel> please HELP !!! I am not being able to play youtube video in firefox
[14:29] <dj_korppi> hey all, any grub + softraid gurus around... 9.10 -> 10.04 upgrade broke my computer and internet offers no help on the issue :/
[14:29] <bazhang> ymfl, this is English. #ubuntu-cn for Chinese
[14:30] <crankyadmin> but use byobu it is laid out a bit better
[14:30] <intel>  please HELP !!! I am not being able to play youtube video in firefox
[14:30] <crankyadmin> dj_korppi, define broke?
[14:30] <abhijit> !details | dj_korppi
[14:30] <charmer> intel: is that really the kind of emergency that requires three exclamation points? haha
[14:30] <CruX|> hello, i'm behind proxy server, how I can add key with command sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 7613768D ?
[14:30] <ymfl> why?
[14:30] <intel> yup
[14:31] <ymfl> can you help me
[14:31] <zhangtao> aha,so  many people here
[14:31] <crankyadmin> CruX|, export HTTP_PROXY='http://foobar/'
[14:31] <bazhang> ymfl, this is not chat. its ubuntu support in English.  #ubuntu-cn for Chinese language support
[14:31] <dj_korppi> ok... after upgrade computer does not boot because of grub error. I have RAID1 softraid that contains all but /boot and the raid array seems broke... mdadm allows me to --assemble it, but it shows no partition table
[14:32] <dj_korppi> because of the raid problem I cannot follow the re-install grub instructions I found on the net
[14:32] <charmer> intel: did they work before?
[14:32] <zhangtao> what's wrong!?
[14:32] <ymfl> oh my gad
[14:32] <CruX|> crankyadmin: my proxy env is set
[14:32] <intel> no
[14:32] <bazhang> ymfl, please stop
[14:32] <charmer> intel: is this a new install of ubuntu?
[14:32] <ymfl> why??
[14:32] <intel> yes
[14:32] <zhangtao> what!?
[14:33] <intel> its ubuntu 9.04
[14:33] <crankyadmin> pastebin export
[14:34] <zhangtao> can i set some keyword I care here,so it can tell me what other talk about
[14:34] <CruX|> crankyadmin: [pid 32005] connect(5, {sa_family=AF_INET, sin_port=htons(11371), sin_addr=inet_addr("91.189.89.49")}, 16) = -1 EINPROGRESS (Operation now in progress)
[14:35] <charmer> intel: you can actually download it form adobe.com
[14:35] <intel>  please HELP !!! I am not being able to play youtube video in firefox
[14:35] <bazhang> zhangtao, this is ubuntu support; did you have a support question?
[14:35] <om26er> intel, install flash.. open software center and search flash and install it
[14:35] <CkhiKuzad> intel: sudo apt-cache search flash
[14:35] <intel>  no it is not being downloaded
[14:35] <philinux> intel: is flash installed ok
[14:36] <crankyadmin> CruX|, in your term type: export and paste that into pastebin.ca
[14:36] <CkhiKuzad> it will give you a list of the flash things, look for something with firefox in it too.
[14:36] <mush> Is there any alternative to jolicloud desktop? any other xwindow envyronment such as blackbox that could run well under jolicloud?
[14:36] <charmer> intel: adobe.com will let you pick your version. select the one for ubuntu 9.04 and it will open a pop up to install it.
[14:36] <philinux> intel: Try this. https://addons.mozilla.org/en-US/firefox/addon/161939/
[14:36] <CkhiKuzad> then type sudo apt-get install [the package you chose in apt-cache]
[14:36] <zhangtao> bazhang,I have no question now
[14:36] <mush> Is there any alternative to jolicloud desktop? any other xwindow envyronment such as blackbox that could run well under jolicloud?
[14:36] <Pici> mush: What exactly does that have to do with Ubuntu? I thought jolicloud was its own OS?
[14:37] <charmer> intel: or open terminal and enter this "sudo aptitude install ubuntu-restricted-extras"
[14:37] <intel>  I tried but it doesn't happen
[14:37] <bazhang> zhangtao, okay. chat in #ubuntu-offtopic ; support here
[14:37] <ymfl> Can you speak Chinese?
[14:37] <akiva> hello
[14:37] <charmer> intel: that will not only install flash, but also mp3 support, etc
[14:37] <bazhang> ymfl, that is offtopic here. please /join #ubuntu-offtopic
[14:37] <zhangtao> I just want to know some thing I care about or some I know
[14:37] <CruX|> crankyadmin: http://pastebin.com/FNkeB50m
[14:37] <abhijit> zhangtao, which irc client you are using?
[14:37] <bonly> 这里有说中文的?
[14:38] <ymfl> 有
[14:38] <ymfl> 哈哈
[14:38] <bonly> 哈哈
[14:38] <philinux> intel: have you got internetnet access
[14:38] <zhangtao> Xchat 2.8.6
[14:38] <CkhiKuzad> intel: sudo apt-get install flashplugin-nonfree
[14:38] <bonly> 还以为没有人会中文呢
[14:38] <CruX|> seems gpg is ignoring proxy env
[14:38] <MaRk-I> !cn | bonly ymfl
[14:38] <ymfl> 我还以为呢
[14:38] <crankyadmin> CruX|, use https_proxy, sorry my bad
[14:38] <crankyadmin> :)
[14:38]  * om26er wishes people would tell others to use software center..
[14:39] <bonly> 可惜我是用debian的
[14:39] <abhijit> zhangtao, go to settings>preferences>alerts> there you can set word to highlight
[14:39] <bonly> 没ubuntu的人多
[14:39] <bonly> 于是来了这里
[14:39] <zhangtao> OK
[14:39] <ilovefairuz> !en | bonly
[14:39]  * CkhiKuzad doesnt have software center, so everyone talking about software center leaves him out, so om26er is leaving him out
[14:39] <ymfl> 我也没找到中文聊天室
[14:40] <bonly> 是呀,以前有中文的
[14:40] <akiva> I have problems with the visual effects after updating the kernel in 10.04. Suddenly Gnome or X act like I do not have a 3d card. I have installed the newest NVideo drivers using ubuntu x
[14:40] <abhijit> CkhiKuzad, software center is only in ubuntu karmic koala 9.10 and onwards
[14:40] <bazhang> bonly, english here
[14:40] <CkhiKuzad> and i use 9.04
[14:40] <bonly> 现在用xchat的越来越少了
[14:40] <zhangtao> thank you! ha ha
[14:40] <abhijit> CkhiKuzad, then you have add/remove
[14:40] <bazhang> bonly, #ubuntu-cn for chinese
[14:40] <CruX|> crankyadmin: well same error with https_proxy
[14:40] <philinux> om26er: some peeps dont have SC. 8.04 users eg
[14:40] <bonly> OK...OK
[14:40] <dj_korppi> so... if I break the problem down, the first problem now is that I have a RAID1 array, which somehow became unusable when I upgraded from 9.10 -> 10.04. Disk utility shows the components of the array, but when I tried to start the array, it said something about missing components. mdadm managed to start it with --assemble --scan but there is no partition table. What can I do?
[14:40] <CkhiKuzad> yes i know abhijit.
[14:40] <zhangtao> oh,what other use!?
[14:40] <crankyadmin> CruX|, odd... does the proxy require authentication?
[14:40] <om26er> philinux, the main point is ask new users to use gui... not command line ;)
[14:41] <akiva> Anyone there?
[14:41] <bonly> i am using debian sid
[14:41] <CruX|> crankyadmin: no
[14:41] <BluesKaj> 'Morning folks
[14:41]  * philinux agrees
[14:41] <CkhiKuzad> om26er: if they use gui only, they will not know how to use command line.
[14:41] <bazhang> bonly, try #debian
[14:41] <Jinxed-> mjpg_streamer: command not found [14:41] <om26er> CkhiKuzad, they dont have to
[14:41] <bonly> ok
[14:41] <CruX|> crankyadmin: in strace I can see that gpg is trying to connect directly
[14:41] <crankyadmin> CruX|, can you wget a random URL? and see what happens?
[14:42] <CruX|> crankyadmin: yes I can
[14:42] <CkhiKuzad> e.e when did linux become windows?
[14:42] <CruX|> apt-get is working correctly
[14:42] <mei> Why can't I access my Ubuntu computer using the hostname after setting up winbind, but instead after setting up SAMBA?
[14:42] <ServerTech> How can i access "screen" in root!?!?
[14:43] <CkhiKuzad> ServerTech, most likely in root it doesnt have byobu.
[14:43] <CruX|> crankyadmin: hmm fixed sudo command cleared my https_proxy variable
[14:43] <kiamo> what log can I check to see if something was going on with my usb hdd before system freeze?
[14:43] <CruX|> now it's working
[14:43] <ServerTech> ......
[14:43] <CruX|> thx for help
[14:43] <ServerTech> wht should i do then?
[14:43] <CkhiKuzad> so you need to get byobu. thats something i guess is in software center, because software center is the only thing anyone ever needs on ubuntu </sarcasm>
[14:44] <crankyadmin> CruX|, no worries
[14:44] <CkhiKuzad> ServerTech, i will PM you, give me a minute
[14:44] <thulsi5> Hello
[14:44]  * philinux terminal should be the last resort for new users !
[14:44] <Monkey_Dust> CkhiKuzad: software center is no longer visible on my machine, it never worked
[14:45] <thulsi5> Hello
[14:45] <CkhiKuzad> Monkey_Dust: thats what i mean. people are saying to use the software center, rather than using apt which takes a quarter of the time
[14:45] <Monkey_Dust> !hi| thulsi5
[14:46] <om26er> CkhiKuzad, ....apt which takes a quarter of the time and fears people away from Ubuntu
[14:46] <shauno> If I tell my mother to do something in the terminal, nothing's going to take "a quarter of the time" ever again.  I thought this was meant to be linux for human beings.
[14:46] <livingdaylight> ok, i have broken OObOOntOO
[14:46] <abhijit> !freedom
[14:47] <ilovefairuz> shauno: human beings have brains.
[14:47] <abhijit> !freedome
[14:47] <abhijit> :(
[14:47] <livingdaylight> My ooBooNToo broke
[14:47] <abhijit> !details | livingdaylight
[14:48] <pradeep> hello everyone
[14:48] <thulsi5> Hello
[14:48] <livingdaylight> abhijit, i have cited but no one can fix
[14:48] <abhijit> !patience | livingdaylight
[14:48] <ubuntu> hi
[14:49] <thulsi5> Hi I'm from mysore. Please Guide.
[14:49] <livingdaylight> abhijit, no, people have tried, but this ooboontoo too broken
[14:49] <abhijit> !in | thulsi5
[14:49] <marine1> need help setting up scanner portion of all in one
[14:49] <philinux> livingdaylight: maybe a reinstall is looming then
[14:49] <abhijit> livingdaylight, then reinstall? :P :D ;)
[14:49] <livingdaylight> boohoohooo...
[14:49] <Jinxed-> anyone know how to install mjpg_stramer command for ubuntu 10.04?
[14:50] <majdekalel> hello again
[14:50] <philinux> livingdaylight: Backup backup and backup important stuf
[14:50] <livingdaylight> philinux, it took me so long to make my install just perfect... then i hash everything up with brother printer drivers
[14:50] <majdekalel> Jinxed on Private
[14:50] <marine1> hp4500 officejet completely installed but scanner is not recognized
[14:50] <philinux> livingdaylight: is home on it's own partition
[14:50] <livingdaylight> philinux, yes
[14:51] <abhijit> !scanner | marine1
[14:51] <philinux> livingdaylight: then no problem
[14:51] <thulsi5> Hello Pls guide
[14:52] <philinux> livingdaylight: At the partitioner just make sure you DONT mark home to be formatted. Backup anyway
[14:52] <livingdaylight> philinux, yup :)
[14:53] <chemical-death> livingdaylight: could you fix your problem?
[14:53] <livingdaylight> chemical-death, almost, but in the end no
[14:53] <philinux> livingdaylight: all your app settings will still be there after install.
[14:53] <thulsi5> Hello Pls reply someone
[14:54] <marine1> abhijit: yes the scanner
[14:54] <livingdaylight> chemical-death, i removed things from var/dpgk, which fixed dpkg but in the end when i want to reinstall brother drivers I end up in a mess again
[14:54] <raystlin36> any grub experts hanging around?
[14:54] <Monkey_Dust> thulsi5: don't say please, say 'hints & tips anyone' or so
[14:54] <chemical-death> livingdaylight: ok i see
[14:54] <BluesKaj> !in | thulsi5
[14:55] <marine1> abhijit: i have all the dependencies in place and running
[14:55] <bazhang> !givemeatest
[14:55] <philinux> livingdaylight: See this and do some more research http://ubuntuforums.org/showpost.php?p=976455&postcount=3
[14:56]  * philinux some grub yes
[14:56] <moreia> I'm trying to troubleshoot a thinkpad x40 that choked on upgrade to Karmic. It's on Lucid now, but with the most recent kernels it won't boot all the way
[14:56] <moreia> someone said there's a known issue with x40s
[14:57] <moreia> I haven't figured it out yet though.
[14:57] <pradeep> in my office i use the LAN here and it is on dhcp too, but still i cant surf the internet but other windows computers can surf the internet on my network dont really know what is wrong here. i can ping the router but cant ping external addresses like eg. www.google.com, www.yahoo.com what can i do please...
[14:58] <marine1> abhijit: all hplip files d/l
[14:58] <philinux> raystlin36: http://ubuntuforums.org/showthread.php?t=1195275
[14:58] <chemical-death> pradeep: look for dns errors ...try to surf with an ip of a webpage
[14:58] <marine1> hp4500 officejet completely installed but scanner is not recognized
[14:59] <raystlin36> i have a server that is running Hardy... it's been running flawlessly for over a year.  All of the sudden it won't boot.  It won't even get past loading GRUB.  I am able to boot to a live CD and see the filesystem is still intact.  I have tried to reinstall GRUB, but the problem persists.
[14:59] <ServerTech> banzhan : I have deleteted the script for information.
[14:59] <Monkey_Dust> pradeep: try /etc/init.d/networking restart
[14:59] <bazhang> ServerTech, thank you
[14:59] <pradeep> Monkey_Dust,  did that too
[15:00] <dj_korppi> I have a box here with two SATA drives, configured to have a small partition with MBR that mounts to /boot and RAID1 software raid array that mounts to /. I upgraded the box from 9.10 -> 10.04, after which it refused to boot because of grub error. I am unable to follow the directions I found in the internet to reinstall grub, as the RAID1 array has no partition table anymore. What can I do to restore the RAID1 array?
[15:00] <Monkey_Dust> pradeep: paste /etc/network/interfaces to http://paste.ubuntu.com/ en show it to us
[15:00] <marine1> 4500 officejet completely installed but x-sane doesn't find any scanners
[15:01] <marine1> all hplip files d/l and installed
[15:01] <raystlin36> philinux: thanks for the info... i've looked at similar information and tried most of those steps.  I guess i will try the ones i haven't done before.
[15:01] <Monkey_Dust> marine1: try sane-find-scanner
[15:01] <marine1> Monkey_Dust: in terminal
[15:02] <Monkey_Dust> marine1: yes
[15:03] <marine1> Monkey_Dust: no results found it at libusb:002:002
[15:03] <Monkey_Dust> marine1: https://help.ubuntu.com/community/ScanningHowTo
[15:05] <marine1> Monkey_Dust: tried that already
[15:05] <philinux> raystlin36: whats the issue. Also see this. https://help.ubuntu.com/community/Grub2
[15:06] <digifor> Does route -n tell me my default route?
[15:06] <dj_korppi> I cannot believe that 9.10 -> 10.04 upgrade destroyed my RAID1... if that really is the case I'd say that's a _serious_ flaw
[15:08] <RenatoSilva> How to make double click on window title maxmizing/restoring the window? I can't recall which option in the config manager :(
[15:08] <_DGM_> bleh ubuntu really shouldnt install all that junk by default
[15:08] <raystlin36> philinux: this server is running Hardy, so it is running GRUB not GRUB2... but i appreciate the info of GRUB2.  the issue is this: i have a server that is running Hardy... it's been running flawlessly for over a year.  All of the sudden it won't boot.  It won't even get past loading GRUB.  I am able to boot to a live CD and see the filesystem is still intact.  I have tried to reinstall GRUB, but t
[15:08] <sipior> dj_korppi: unless you've deliberately written to the disks involved in the RAID, they should still be intact. try recreating the array.
[15:09] <pradeep> Monkey_Dust, this fix it temporarily route add default gw 192.168.0.250
[15:09] <fumanchu182> Is there a problem with xul-runner dev?  I am getting hellacious dependency issues.
[15:09] <skrite> how can i do a dist-upgrade but hold back the kernel and packages that depend on it? ( i have some modules i compiled that were quite a pain in the neck to install?
[15:09] <xangua> RenatoSilva: system>prefs>windows
[15:09] <raystlin36> philinux: it doesn't even show the GRUB menu... it just hangs until the timeout expires and then reboots...
[15:10] <dj_korppi> sipior: only thing I've done manually is mdadm --assemble --scan as the raid was not working when I booted up using this live CD
[15:10] <sipior> dj_korppi: with what result?
[15:10] <dj_korppi> sipior: I got md0, but with empy partition table
[15:11] <philinux> raystlin36: ah I see. No grub menu at all. Could be a hardware issue. Use a 10.04 live cd and use the system>admin>disk utility or use gsmartcontrol to check the disk.
[15:11] <sipior> dj_korppi: these disks are separate from the disk on which you've installed ubuntu?
[15:11] <Stameni> hello, i downloaded Age Of Empires 2 and and i tried to execute SETUP.EXE but wine tells me it is not marked as executable, how do i mark it as executable ?
[15:11] <dj_korppi> sipior: before the mdadm I tried using this GUI disk utility but it said it cannot start the array as some parts was missing
[15:11] <dj_korppi> sipior: no, md0 is mounted as /
[15:11] <RenatoSilva> xangua: doesn't work. Using emerald here as decorator
[15:11] <Stameni> btw, when i look in properties, it is Dos/windows executable file
[15:12] <sipior> dj_korppi: which disk utility?
[15:12] <raystlin36> philinux: the disk(s) has already passed the Dell extended diagnostics
[15:12] <OerHeks> Stameni, use terminal an cd to the dir, then : chmod +x <filename>
[15:12] <dj_korppi> sipior: system->administration->disk utility
[15:12] <xangua> RenatoSilva: then set it in the emerald manager
[15:12] <ma3x> hi, is there a tool in ubuntu to make windows xp bootable usb pen drive?
[15:12] <pdelgallego> Hi I am recording some screencast using emacs. I would like to show the users what keyword I am pressing.  Is there any software to do that. I am using recordmydesktop right now.
[15:12] <ma3x> there are many for windows, but havent heard of any for ubuntu
[15:12] <raystlin36> philinux: the motherboard, memory, both riser cards, and a single processor have been replaced
[15:12] <Stameni> OerHeks, thank you, i`m going to try that
[15:13] <philinux> raystlin36: so there are no POST errors
[15:13] <chandan> hi
[15:14] <chandan> is anybody here?
[15:14] <popey> pdelgallego: there is an app to do that but i can never remember the name of it!
[15:14] <Monkey_Dust> chandan: nobody, you're alone
[15:14] <OerHeks> !hi chandan
[15:14] <sipior> dj_korppi: could you pastebin the output of mdadm --query?
[15:14] <pdelgallego> popey, umm thats might be a problem :)
[15:14] <popey> pdelgallego: give me a minute or two, it will come to me!
[15:14] <raystlin36> philinux: nope... the box passes POST without problems... it will boot to a live CD and run... i even used chroot to get to the point that it was using the actual filesystem on the drives... it runs fine... it just won't boot.
[15:15] <pdelgallego> popey, kk no problem
[15:15] <sipior> dj_korppi: mdadm --assemble --scan won't work, because it relies on having a raid configuration file in /etc, which was probably overwritten in the upgrade.
[15:15] <chandan> can you tell the command used for installing vlc media player?
[15:15] <philinux> raystlin36: Run this from the livecd. http://sourceforge.net/projects/bootinfoscript/
[15:15] <popey> pdelgallego: http://www.omgubuntu.co.uk/2010/06/screenkey-desktop-recording-tool.html
[15:15] <OerHeks> chandan, sudo apt-get install vlc
[15:15] <b0ot> majdekalel, sorry my internet got cut off (this is jinxed-)
[15:15] <sipior> dj_korppi: well, strike that last bit, that seems unlikely, on further consideration.
[15:16] <RenatoSilva> xangua: just found it. Thanks!
[15:16] <pdelgallego> popey,  great that is exactly what I was looking for.
[15:16] <raystlin36> philinux: i will try that... it's in a remote location so i have to get someone to acutally boot it to the livecd for me
[15:17] <philinux> raystlin36: That will show exactly what is going on.
[15:17] <dj_korppi> sipior: mdadm --query only says "no devices given"...mdadm --query /dev/md0 says /dev/md0: 144.39GiB raid1 2 devices, 0 spares. Use mdadm --detail for more detail.
[15:17] <pdelgallego> popey, do you what program can I use to add a sound in the background? something like a tune. I dont need to synchronize
[15:17] <popey> pdelgallego: I'd do that in post production, in something like pitivi or kdenlive
[15:17] <sipior> dj_korppi: and --detail?
[15:17] <dj_korppi> sipior: this is my first time in IRC don't know what pastebin is :)
[15:17] <popey> !paste
[15:17] <sipior> !paste > dj_korppi
[15:18] <gnusiva> hi all
[15:18] <gnusiva> i cant install vim in ubuntu http://pastebin.com/GQHJh3K6
[15:18] <ikonia> gnusiva: it's already installed by default
[15:19] <Pici> gnusiva: Install vim-full if you want more vim features.
[15:19] <pdelgallego> gnusiva, Inst it  already there.
[15:19] <pdelgallego> gnusiva, maybe your linux box is a emacs fan :P
[15:19] <dj_korppi> sipior: pasted
[15:19] <sipior> dj_korppi: i'll need the link :-)
[15:20] <dj_korppi> sipior: http://paste.ubuntu.com/476958/
[15:20] <gnusiva> ikonia: http://pastebin.com/QS6zL7ip
[15:20] <gnusiva> pdelgalleo: http://pastebin.com/QS6zL7ip
[15:20] <ikonia> gnusiva: what version of ubuntu is that ?
[15:21] <sipior> dj_korppi: looks fine to me. and when you mount it?
[15:21] <VCoolio> j
[15:21] <gnusiva> ikonia: 10.04
[15:22] <sta1ns> When I enter an iptables entry such as "iptables -A INPUT -p tcp -s MYIP --dport 80 -j DROP", I am still able to connect to my website, is this a problem with iptables or on my side? I've cleared my cache aswell.
[15:22] <philinux> raystlin36: Watch out for this. See the link post #3 http://ubuntuforums.org/showthread.php?t=1514750
[15:22] <Tomwa> Can somebody help me? I've installed Ubuntu 10.04 from the alternate installer and I boot into the Ubunti-linux-generic option but after that I either get the Ubuntu loading screen with the dots which goes black and my monitor hibernates, or a bunch of randomly colored pixels
[15:22] <ikonia> gnusiva: have you uninstalled it ? I'm asking as vim is a default package in ubuntu 10.04
[15:22] <aeon-ltd> sta1ns: wheres the website hosted and is it using https?
[15:23] <Json> Tomwa, Try using the recovery option.
[15:23] <gnusiva> ikonia: how to install it again
[15:23] <Tomwa> Okay I'll be back in a minute
[15:23] <ikonia> gnusiva: did you uninstall it ?
[15:23] <sta1ns> aeon-ltd: in russia, and no it's not using https, that would be port 443
[15:23] <dj_korppi> sipior: wth? now it mounted?
[15:23] <sipior> dj_korppi: like magic!
[15:23] <dj_korppi> sipior: o.O
[15:24] <dandre> hello
[15:24] <dandre> I wonder why ubuntu 64-bit - Not recommended for daily desktop usage ?
[15:24] <aeon-ltd> sta1ns: try blocking udp aswell
[15:24] <gnusiva> ikonia: also i cant edit in vi editor, i dont now how to handle it
[15:25] <Monkey_Dust> gnusiva: try vim
[15:25] <Json> How can /tmp be temporarily re-assigned to some other location ? And then reverted back to it's original location ?
[15:25] <raystlin36> philinux: thanks for the heads up
[15:25] <gnusiva> monkey_dust: http://pastebin.com/GQHJh3K6
[15:25] <Phonex01> Hello
[15:25] <gnusiva> monkey_dust: what shall i do now
[15:26] <sipior> dandre: i agree, the advice does seem a bit old-fashioned.
[15:26] <Phonex01> anyone can help me with Ebox ?
[15:26] <xangua> dandre: because not all apps are aviable for 64bit
[15:26] <Pici> gnusiva: You can install the vim-tiny package, but it should have already been installed.
[15:26] <Phonex01> anyone help me with Ebox ?
[15:26] <dandre> ok
[15:26] <Gnea> !ask | Phonex01
[15:26] <sta1ns> aeon-ltd: still able to access. i have the same problem with ufw, even if it's enabled/active
[15:27] <gnusiva> Pici: ya it is saying already newest version, but vim command is not working
[15:27] <Phonex01> hi hi man why you talking with me like that !!!
[15:27] <philinux> raystlin36: Yeah could be that bug and the minix file system thing.
[15:27] <dj_korppi> sipior: this is so very strange I cannot understand this... now I must try reinstalling grub according to the instructions... I hope the computer boots then. thanks for the magic :D
[15:28] <Gnea> troll removed, next.
[15:28] <sipior> sta1ns: which ip address are you using for "MYIP"? are you behind NAT?
[15:28] <danmark> lol troll
[15:29] <Gnea> danmark: I was perfectly willing to help that person out, they chose to take offense and leave before I could
[15:29] <Pici> gnusiva: Does  dpkg -l vim-tiny   have ii next to it on the far left?
[15:29] <sta1ns> sipior: no, my home ip, i checked it with common ip checking sites
[15:29] <Json> How can /tmp be temporarily re-assigned to some other location ? And then reverted back to it's original location ?
[15:29] <ikonia> Json: can you give us a little more background, such as why ?
[15:29] <Duck_> Helo
[15:30] <Duck_> hello*
[15:30] <Json> ikonia, I'm truing to upgrade using the alternate cd and /tmp doesn't have enough space.
[15:30] <Duck_> I have a quick question.
[15:30] <sipior> sta1ns: time to add a logging rule and see what's going on.
[15:30] <ikonia> Json: ok, so is tmp on / at the moment (as in the partition for / )
[15:30] <Gnea> Duck_: please ask it.
[15:30] <gnusiva> pici: http://pastebin.com/HbsWTgU4
[15:31] <Json> ikonia, Yes, it is. Can I assign to some folder on my /home partition or to a thumb drive ?
[15:31] <dandre> is there any way to easilly  upgrade a 32 bit installation to a 64bit
[15:31] <sipior> dandre: 'fraid not.
[15:31] <Duck_> I used debian, not ubunu, but anyway, I've picked up an old box, but I don't have a keyboard (i just use a laptop normally). anyway, I'd like to be able to pop a disc into this box (as it has no os) and have it get a dhcp address from my router over ethernet and log in remotely. Does Ubuntu run ssh by default with a user/pass like root:toor?
[15:31] <Pici> gnusiva: What about:  which vim  ?
[15:32] <ikonia> Json: yes, either will work, you can create a "symlink" to your home partition, or just mount your usb drive as /tmp
[15:32] <gnusiva> nothing it shows
[15:32] <ikonia> Duck_: ask in #debian, this is only for ubuntu suppport
[15:32] <gnusiva> pici:nothing it shows
[15:32] <ortsvorsteher> Duck_, no, ubuntu dont runs ssh-server by default
[15:32] <noahir> error: C preprocessor "/lib/cpp" fails sanity check
[15:32] <noahir> anyone can help me ?
[15:32] <Duck_> ortsvorsteher: any distro you know that would satisfy my needs?
[15:33] <Pici> gnusiva: try: echo $PATH
[15:33] <Duck_> As I said, I don't have a keyboard
[15:33] <Duck_> If I can remote in, I can install everything from there.
[15:33] <Json> ikonia, I don't quite follow. How do I do both ? The "symlink" or the mount as /tmp ?
[15:33] <Monkey_Dust> Duck_: try sudo aptitude install openssh-server
[15:33] <ortsvorsteher> Duck_, at the moment i dont remember, may you try suse?
[15:33] <ikonia> Duck_: we only support ubuntu here
[15:33] <ikonia> Json: which do you want to go for, and I'll talk you through
[15:33] <gnusiva> Pici: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
[15:33] <Duck_> jesus. did half of you even read my scenrio
[15:33] <Gnea> ikonia: I think he's asking if there's a way for Ubuntu to get an onscreen keyboard at bootup
[15:33] <aid> can anyone tell me a simple way to transfer music to my iphone via ubuntu, and before you say rythmbox it doesnt work for me :(
[15:33] <gentooxer> Duck_: :)
[15:34]  * iliri NcNcNcNcNcNcNc
[15:34] <dandre> so if I only have 4G of RAM I don't have any advantage to install a 64bit version
[15:34] <noahir> and essential is installed...
[15:34] <noahir> error: C preprocessor "/lib/cpp" fails sanity check
[15:34] <Pici> gnusiva: Did you remove anything?
[15:34] <aeon-ltd> sta1ns: are you sure you configured for outgoing and incoming?
[15:34] <Json> ikonia, The better option, I don't know which. You decide, I'll follow.
[15:34] <ikonia> Gnea: wow, not what I read
[15:34] <gnusiva> Pici: i have 2 system installed with ubuntu 10.04 but both were not working
[15:34] <ikonia> Json: how big is your thumb drive ?
[15:34] <gnusiva> Pici: no i didnt removed anything
[15:34] <Duck_> gentooxer: :). Any ideas?
[15:34] <Json> ikonia, 4 GB.
[15:34] <Gnea> ikonia: just seemed to be the most logical thing. I read it as "I normally use Debian, but I want to use Ubuntu on this system"
[15:34] <ikonia> Json: more than enough, can we format that ?
[15:34] <gnusiva> Pici: am trying to install it, but it is not installing
[15:35] <ikonia> Gnea: that part I did get
[15:35] <sipior> noahir: what command are you issuing?
[15:35] <Json> ikonia, Yes.
[15:35] <noahir>  ./configure :D
[15:35] <ikonia> Json: do you have it there with you now ?
[15:35] <sta1ns> aeon-ltd: so i should do "iptables -D OUTPUT -p tcp -s MYIP --dport 80 -j DROP" along with udp aswell?
[15:35] <sipior> noahir: of what?
[15:35] <noahir> sipior: webalizer
[15:35] <ado> ciao
[15:35] <Pici> gnusiva: What about vim.tiny ?
[15:35] <iliri> ado
[15:35] <iliri> ciao
[15:35] <sipior> noahir: can you compile a simple C program?
[15:35] <Json> ikonia, Yes. Plugged in.
[15:36] <noahir> which simple ? dunno
[15:36] <ikonia> Json: ok, can you pastebin the output of "sudo fdisk -l" for me please ?
[15:36] <iliri> noahir
[15:36] <iliri> hello
[15:36] <gnusiva> Pici: ya it is working
[15:36] <gnusiva> Pici: :)
[15:36] <BluesKaj> Duck_, install openssh server and client on both machines and you should be in business , your router should display the new box IP , then just ssh username@IPaddress , or for more options , ssh -Y -l user 192.168.x.x
[15:36] <noahir> iliri: i dont know you
[15:36] <ilovefairuz> noahir: main(){}
[15:36] <ilovefairuz> there you go.
[15:36] <gnusiva> Pici: thank u so much
[15:36] <Pici> gnusiva: I'm not done.
[15:36] <Duck_> BlueKaj: read my question again
[15:36] <Pici> gnusiva: sudo update-alternatives --config vim
[15:36] <Duck_> I'm not a newfag like you
[15:37] <gnusiva> Pici: oh k k tel me
[15:37] <sipior> Duck_: classy.
[15:37] <razz1> i am having trouble using bluetooth headset in skype, I can use the A2DP profile without any issue, as soon as I call someone on skype i can speak for say 10 seconds and then the headset disconnects. I guess there is something wrong with the handsfree profile. anyone know how to fix this?
[15:37] <noahir> ilovefairuz: yes i can
[15:37] <aeon-ltd> sta1ns: yeah coouldn't hurt to try, remember to save and restart the daemon
[15:37] <gnusiva> Pici: update-alternatives: error: no alternatives for vim.
[15:38] <darthdarkstar> I want to install programs into Wine that are on CD-ROMs but I cannot do so because I cannot change the permission to run the .exe file as an executable. Is there something I can change in Ubuntu to fix this?
[15:38] <Pici> gnusiva: then just: sudo ln -s /usr/bin/vim.tiny /usr/bin/vim
[15:38] <abhijit>  /j #networking
[15:38] <abhijit> :(
[15:39] <pompa> hi everyone, I have a problem with the install of mozc http://code.google.com/p/mozc/wiki/LinuxBuildInstructions
[15:39] <BluesKaj> Duck, I read your question correctly the first time. I described how i ssh into my networked pcs , take my advice or not , it's your call.
[15:39] <riot> heya. Whats the current kernel-version in kubuntu 10.10?
[15:39] <ilovefairuz> riot: uname -a
[15:39] <pompa> I cannot understand what should I do after the build...
[15:39] <noahir> ilovefairuz: any idea ?
[15:39] <sta1ns> aeon-ltd: just adding the rules dont take effect immediately? i cant find the command for ubuntu to save and restart.
[15:39] <Pici> riot : Please join #ubuntu+1 for Maverick/10.10 support/discussion.
[15:39] <Json> ikonia, Sorry for the delay. http://pastebin.com/qpEHFzDz
[15:40] <ikonia> Json: no rush
[15:40] <riot> geez.
[15:40] <gnusiva> Pici: now it is working
[15:40] <ikonia> Json: excellent, this should be easy
[15:40] <ikonia> Json: is the disk mounted ?
[15:40] <riot> i just want to know wether a friend is really running the latest version
[15:40] <ikonia> Json: (as in the usb disk)
[15:40] <aeon-ltd> sta1ns: adding the rules but not saving does nothing that might be the cause of your problem :)
[15:40] <ilovefairuz> noahir: sudo apt-get install --reinstall cpp
[15:40] <riot> 2.6.32-21 doesn't seem to current to me
[15:41] <Json> ikonia, Yes, I can access it. (That's mounted, right ?)
[15:41] <Slart> riot: you might get away with checking packages.ubuntu.com
[15:41] <Boeby> darthdarkstar - wine must be executable and not the exe on the disc... in the console: cd to media and then: wine something.exe
[15:41] <Slart> riot: or.. asking in #ubuntu+1
[15:41] <aeon-ltd> sta1ns: https://help.ubuntu.com/community/IptablesHowTo#Saving%20iptables
[15:41] <gnusiva> Pici: thank u soooooooooooooooooooooooo much
[15:41] <Pici> riot: Thats the version that shipped with lucid/10.04
[15:41] <darthdarkstar> Ok, so I'm just going about it wrong
[15:41] <Pici> riot: lsb_release -a  will show you what version of Ubuntu they are running.
[15:41] <darthdarkstar> got ya
[15:41] <darthdarkstar> Thanks
[15:41] <riot> Pici: thanks
[15:41] <ikonia> Json: correct, is it mounted as a desktop icon on your desktop ?
[15:42] <Json> ikonia, Yes !!
[15:42] <ikonia> Json: right click and hit "unmount"
[15:42] <Monkey_Dust> ikonia is popular today
[15:42] <tommyguitfiddle> Can someone walk me through updating my Asus audio driver?  Never compiled, no deb packages available.
[15:42] <noahir> ilovefairuz: no change :((
[15:43] <Json> ikonia, Done.
[15:43] <noahir> ikonia: hey Matt you know where can be problem ? configure: error: C preprocessor "/lib/cpp" fails sanity check
[15:43] <ikonia> noahir: that could be a massive number of things
[15:43] <noahir> :(
[15:43] <dlandau> tommyguitfiddle: Wasn't there a README or INSTALL with the driver download?
[15:44] <ikonia> Json: ok, can you open a terminal and do "sudo mkfs.ext4 /dev/sdb1"
[15:44] <dharyp> hi guys....my ubuntu very slow...why?
[15:44] <sta1ns> aeon-ltd: just did iptables-save and iptables-restore in ssh, my ssh hangs on iptables-restore
[15:44] <marine1> 4500 officejet all in one completely installed but x-sane not seeing my scanner
[15:44] <sipior> dharyp: that's quite the open-ended question.
[15:44] <ikonia> noahir: what do you want to build ?
[15:45] <noahir> ikonia: webalizer
[15:45] <Pici> !nickspam > constantin_mike
[15:45] <ikonia> noahir: that's already in the repos
[15:45] <ikonia> noahir: you don't need to build that
[15:45] <noahir> ikonia: i need to set language
[15:45] <noahir> other language
[15:45] <marine1> Monkey_Dust: tried link but to no avail
[15:45] <cyanidetransisto> morning
[15:45] <ikonia> noahir: that shouldn't be a problem
[15:45] <marine1> all hplip dependencies installed
[15:46] <noahir> ikonia: i googled and found it can be done just recompiling with proper prefix...
[15:46] <cyanidetransisto> any grub 2 experts around?
[15:46] <noahir> cyanidetransisto: for what ?
[15:46] <Pici> noahir: There are a bunch of language files installed with webalizer as it is.
[15:46] <ikonia> noahir: shouldn't need to recompile it to set the language
[15:47] <Monkey_Dust> !ask cyanidetransisto
[15:47] <barf00365> Hi all, I am having trouble with the script at http://pastebin.com/Qb4G3BgA  When I issue the start command it freezes, can anyone see any problems with it?
[15:47] <noahir> ikonia: i didnt find how...
[15:47] <cyanidetransisto> noahir: it has broken my win partition.
[15:47] <ikonia> noahir: I've not got it open at the moment to walk you through it, and I'm juggling a little too much at the moment, if you can hang on, I'll get to you
[15:48] <darthdarkstar> Ok... silly question cause I'm very new. How do I cd to the cd-rom drive
[15:48] <darthdarkstar> <--- Feels stupid asking
[15:48] <ikonia> darthdarkstar: cd /cdrom
[15:48] <ikonia> darthdarkstar: nothing stupid about it
[15:48] <riot> is it okay to upgrade ubuntu via apt-get dist-upgrade?
[15:48] <noahir> ikonia: mkay...i tried to find solution by myself but nothing...
[15:48] <aeon-ltd> riot: yes
[15:48] <riot> good.
[15:48] <Monkey_Dust> riot: reïnstall is much faster than dist-upgrade
[15:48] <aeon-ltd> riot: usually if your going from the previous version
[15:49] <darthdarkstar> that says no such file or directory
[15:49] <darthdarkstar> hmmm
[15:49] <riot> real problem is: a friend can't use her two optical drives in 10.04
[15:49] <aeon-ltd> riot: if your jumping versions eg. 8.04 to 10.04 it causes problems for some users
[15:49] <riot> dmesg displays them as sr0/1 but they can't be mounted
[15:49] <Pici> riot: a dist-upgrade is not the proper way to upgrade from one release to the next.
[15:49] <riot> no, she has 10.04
[15:49] <Pici> !dist-upgrade
[15:49] <Monkey_Dust> riot: try installing off a usb stick
[15:49] <Green00000> hi there
[15:49]  * iliri Mire Se Erdhe  [ Green00000 ] Ja Kalofsh Sa Me Mire Nen Shoqerine Tone:)
[15:50]  * iliri Hi ALLL
[15:50] <riot> Monkey_Dust: no, 10.04 is already installed - but the optical drives don't seem to work correctly
[15:50] <Monkey_Dust> ok riot i missed that part, then
[15:50] <abhijit> !hi | iliri
[15:50] <reggi> hello everyone - i have an xorg.conf question: When I set my display resolution to 2048x1024 I cannot chose 72Hz as refresh rate, only 60Hz or Auto. How can I add 72Hz for the 2048x1024 resolution? Thanks.
[15:51] <saby> has anyone tried Gnome Shell on ubuntu ?
[15:51] <Green00000> i want to know, if the shipping-request is already down. ???????????????
[15:51] <Json> ikonia, Got stuck. Yes, here's the output. http://pastebin.com/zdzUcfkc
[15:51] <KukuNut> riot: plus 10.10 is not ven beta yet
[15:51] <KukuNut> even*
[15:51] <marine1> I need someone with experience setting up scanner
[15:51] <Monkey_Dust> !ot| saby
[15:51] <Boeby> darthdarkstar - when you type mount, you will see where your cd rom is mounted, denn you see something like /media/cdrom or /media/cdrom0
[15:51] <ikonia> Json: looks great
[15:51] <marine1> 4500 office jet al in one
[15:51] <ikonia> Json: give me 2 minutes, just got to step away from desk
[15:51] <marine1> everything works except scanner portion
[15:51] <abhijit> !scanner | marine1 have you read this?
[15:52] <marine1> hplip installed
[15:52] <Json> ikonia, Sure.
[15:52] <marine1> ubottu: i tried that already
[15:52] <Boeby> darthdarkstar - then cd /media/cdrom0
[15:52] <cryptk> is there a way to list all installed packages with their versions
[15:52] <abhijit> :)
[15:52] <cryptk> including the distro part of the version
[15:52] <cryptk> I.E. cron 1.2.3.4 (lucid)
[15:52] <Pici> cryptk: dpkg -l | grep "^ii"
[15:52] <riot> KukuNut: oh, yes, i just see it. but 2.6.32 is way too old, imho.
[15:53] <Pici> cryptk: all the installed packages should be at the same release version.
[15:53] <cryptk> that is the problem...
[15:53] <riot> oh wait. its not
[15:53] <cryptk> mine arent
[15:53] <lap_dragon> Does steam work on ubuntu?
[15:53] <cryptk> I was upgrading from Hardy to Lucid and hit a kernel bug
[15:53] <cryptk> now I have a mixmash of packages
[15:53] <riot> i really wonder where the optical-drive-problems come from
[15:53] <reggi> hello everyone - i have an xorg.conf question: When I set my display resolution to 2048x1024 I cannot chose 72Hz as refresh rate, only 60Hz or Auto. How can I add 72Hz for the 2048x1024 resolution? Thanks
[15:53] <cryptk> so I wanted to downgrade the lucid packages and start fresh again
[15:54] <KukuNut> riot: if you want newer kernels download them from kernel-ppa and install via dpkg -i *.deb
[15:54] <ikonia> Json: ok, lets mount it to test it
[15:54] <ikonia> Json: from a terminal type "sudo mount /dev/sdb1 /mnt"
[15:54] <riot> KukuNut: she just wants her optical drives to work in kubuntu 10.04
[15:54] <Boeby> reggi, maybe thats not possible.. look at the manual of your graphiccard, which resolution and frequence are possible
[15:55] <reggi> Boeby, it is possible, I use 2048x1024 @ 72Hz on my Windows 7 machine.
[15:55] <KukuNut> riot: you can upgrade 10.04 but if cdroms don't work then there is a bigger prob somewhere
[15:56] <reggi> Boeby: I just want to know if it is possible in ubuntu to force it to use resolution @ specified Hz
[15:56] <riot> they worked under suse before installing ubuntu as far as i know
[15:57] <cyanidetransisto> noahir: do you think you may be able to help?
[15:57] <reggi> so it is not possible to set a refresh rate for a particular resolution in ubuntu like you can in windows?
[15:57] <somethinginteres> does anyone know of a PPA to keep up to date with the latest media codecs for Lucid? e.g. ffmpeg etc
[15:58] <reggi> hello everyone - i have an xorg.conf question: When I set my display resolution to 2048x1024 I cannot chose 72Hz as refresh rate, only 60Hz or Auto. How can I add 72Hz for the 2048x1024 resolution? Thanks
[15:59] <Json> ikonia, Got disconnected. Could you repeat your last instructions, please ?
[15:59] <reggi> hello everyone - i have an xorg.conf question: When I set my display resolution to 2048x1024 I cannot choose 72Hz as refresh rate, only 60Hz or Auto. How can I add 72Hz for the 2048x1024 resolution? Or is this not possible in Ubuntu? Thanks	
[16:00] <gentooxer> riot: http://www.linuxine.com/story/ubuntu-1010-alpha-3-has-oneconf-and-linux-kernel-2635
[16:00] <ailleantsian> hi, im having problems with my nvidia drivers failing at boot up , i have looked into the x log but a bit stuck
[16:00] <marine1> need help installing scanner portion of all in one unit
[16:00] <lelle> would installing ubuntu-restricted-extras interfere with my drivers in any way?
[16:00] <marine1> all dependencies  are loaded
[16:01] <marine1> hplip also but x-sane is not seeing any devices
[16:01] <riot> gentooxer: uhm, okay.. And what do you want me to notice?
[16:01] <ikonia> Json: from a terminal type "sudo mount /dev/sdb1 /mnt"
[16:02] <gentooxer> riot: the Kernel version
[16:02] <riot> okay, her optical drives worked when using kubuntu-live - after installing they went AWOL
[16:02] <Json> ikonia, Done.
[16:02] <riot> gentooxer: aah, okay.
[16:02] <ikonia> Json: do "sudo chmod 777 /mnt"
[16:02] <reggi> hello everyone - i have an xorg.conf question: When I set my display resolution to 2048x1024 I cannot chose 72Hz as refresh rate, only 60Hz or Auto. How can I add 72Hz for the 2048x1024 resolution? Thanks	:)
[16:03] <reggi> *choose
[16:03] <ailleantsian> on the kernel log it says NVRM: RmInitAdapter failed! (0x23:0xffffffff:655)
[16:03] <Json> ikonia, Done. If it isn't extra trouble, could you explain the commands as well ?
[16:03] <ikonia> Json: sure, you've just formatted your usb drive, mounted it a "/mnt" now you've made it very open in terms of permisssions so anyone can write to it
[16:04] <ikonia> Json: now "sudo umount /mnt" (lets unmount it)
[16:04] <Json> ikonia, Done.
[16:04] <reggi> hello everyone - i have an xorg.conf question: When I set my display resolution to 2048x1024 I cannot choose 72Hz as refresh rate, only 60Hz or Auto. How can I add 72Hz for the 2048x1024 resolution? Thanks	
[16:04] <ikonia> Json: ok, final steps, do you know how to use a text editor ?
[16:05] <Json> ikonia, Yes, Gedit. Will that do ?
[16:05] <ikonia> Json: perfect, edit (as root - gksudo gedit) /etc/fstab
[16:05] <ikonia> Json: that file controls your disk mounting
[16:06] <reggi> hello everyone - i have an xorg.conf question: When I set my display resolution to 2048x1024 I cannot choose 72Hz as refresh rate, only 60Hz or Auto. How can I add 72Hz for the 2048x1024 resolution? Thanks	
[16:06] <janicko> could i have help conecting with wireless router for ubuntu 9.10.  I am helpless
[16:06] <ailleantsian> janicko: whats the problem ?
[16:07] <Json> ikonia, I have it here. http://pastebin.com/MGVnfk74
[16:07] <ikonia> Json: whoaaa your using resierfs - that's different
[16:07] <tucemiux> janicko, post a description of the problem, all in ***one line***
[16:07] <janicko> ailleantsian: I just can't get it working. I contected it to router but it seems it is not recognizing
[16:08] <Json> ikonia, Did I do something wrong ? Can I undo it ?
[16:08] <tucemiux> janicko, use paste bin, what is the output of "iwconfig", again use paste bin
[16:08] <ikonia> Json: nothing wrong, just unusual
[16:08] <ikonia> Json: make the file look like this http://pastebin.com/2bEbKdEy
[16:09] <janicko> tucemiux: it said no wireless connections
[16:09] <reggi> hello everyone - i have an xorg.conf question: When I set my display resolution to 2048x1024 I cannot choose 72Hz as refresh rate, only 60Hz or Auto. How can I add 72Hz for the 2048x1024 resolution? Thanks	
[16:09] <leshaste> what's the config file that lists your dns servers again?
[16:09] <erUSUL>  leshaste /etc/resolv.conf
[16:09] <llutz> leshaste: /etc/resolv.conf
[16:09] <Json> ikonia, Did that. Could you explain the reiserfs surprise ?
[16:10] <tucemiux> janicko, what type of computer do you have? brand name and mode, and what wireless card do you have?
[16:10] <leshaste> thanks
[16:10] <ikonia> Json: the common unix file system for ubuntu is Ext4 - you've chosen resier,
[16:10] <reggi> hello everyone - i have an xorg.conf question: When I set my display resolution to 2048x1024 I cannot choose 72Hz as refresh rate, only 60Hz or Auto. How can I add 72Hz for the 2048x1024 resolution? Thanks	
[16:11] <Monkey_Dust> !xorg| reggi
[16:11] <Json> ikerc, K, It won't affect my /tmp thingy, right ?
[16:11] <karlo> what video editor you guys recommended ?
[16:11] <ikonia> Json: nah, it's not a problem at all
[16:11] <ikonia> Json: just a little unusual
[16:11] <ailleantsian> i have pasted the kernel log on my nvidia issue , please can anyone advise http://pastebin.com/tAVzTgJr
[16:11] <ikonia> Json: reboot, and you're done
[16:11] <cypher-neo> That is one amazingly handy bot Monkey_Dust!
[16:11] <Shagnasty> reggi: are you sure your monitor will support that refresh rate at that resolution?
[16:11] <Monkey_Dust> !best| karlo
[16:12] <cryptk> is there a way to show where a package came from? as in what repository?
[16:12] <lelle> would installing ubuntu-restricted-extras interfere with my wireless drivers in any way?
[16:12] <janicko> tucemiux: i have belkin card wireless and have Packard bell computer
[16:12] <cypher-neo> lelle, I don't think so.
[16:12] <karlo> Monkey_Dust I sad what you recommended, not what is the best video editor
[16:13] <lelle> cypher-neo thinking is for the weak! nah kidding lol
[16:13] <reggi> Shagnasty: i use 2048x1024 @ 72Hz on my Vista machine with no problem.
[16:13] <Json> ikonia, Thanx, a lot. Also, this is only temporary. Can I undo it after I'm done ?
[16:13] <Stale> Hello, I want to know what is the most stable Ubuntu release. Any ideas/suggestions?
[16:13] <cypher-neo> lelle, The ubuntu-restricted-extras package will add various capabilities to your computer, but until you enable or set your wireless card to use any newly installed drivers, it shouldn't do anything.
[16:13] <abhijit> is there any software that tell me if my cd drive if live or dead?
[16:13] <lelle> cypher-neo: thanks
[16:14] <tucemiux> janicko, that doesnt cut it, if someone is to help you they need to know something like, i have a package bell computer, model xyz using wireless card yza, I dont know what wireless card you have and cant help you, someone who has a package bell computer or who has a belkin card wireless **might** but you need to post that piece of information, all in **one line***
[16:14] <cypher-neo> abhijit, Alive or dead in what way?
[16:14] <Stale> I am also installing an minimal ubuntu
[16:14] <ailleantsian> janicko: what model of belkin, because most need ndiswrapper and the windows driver
[16:14] <abhijit> cypher-neo, i can read. but brasero tell me that he had written. but actually nothing is written.
[16:14] <cypher-neo> abhijit, For example: Dead, as in not communicating with the computer? Or, dead, as in, unable to burn DVD's anymore?
[16:14] <amr_> does any one here uses google-chrome on ubuntu 10.04 notices that gmail standard not working any more only html and all is ok with firefox ???????????????
[16:15] <abhijit> cypher-neo, ^^^
[16:15] <Stale> amr_: I believe that 10.04 is buggy.
[16:15] <noahir> ikonia: did you forget me ? :X
[16:15] <cypher-neo> abhijit, That is weird! What are you trying to burn?
[16:15] <cryptk> is there a way to show where a package came from? as in what repository?
[16:16] <abhijit> cypher-neo, iso image.
[16:16] <janicko> ailleantsian: it is F6D4230-4 v1 model. What is ndiswrapper?
[16:16] <Monkey_Dust> cryptk: apt-cache policy
[16:16] <reggi> would someone please help me? I'm trying to learn linux and simply giving me a wiki.ubuntu.com link sometimes is confusing. i just want someone who actually knows if what I am trying to achieve is possible in Ubuntu. i have an xorg.conf question: When I set my display resolution to 2048x1024 I cannot choose 72Hz as refresh rate, only 60Hz or Auto. How can I add 72Hz for the 2048x1024 resolution? Thanks	
[16:16] <jose21m> hola
[16:16] <erUSUL> !es | jose21m
[16:17] <lelle> janicko: ndiswrapper lets you use windows drivers in linux
[16:17] <Stale> reggi: I think that a refresh rate near 70 is easy on the eyes? Maybe :\
[16:17] <Monkey_Dust> janicko: try sudo aptitude install usb-modeswitch
[16:17] <erUSUL> reggi: you can add modelines to xorg.conf. search google for " generate custom modelines xorg.conf "
[16:17] <erUSUL> !info cvt | reggi
[16:18] <erUSUL> !man cvt
[16:18] <janicko> tucemiux: sorry man, but i need to know how to get this info. I am a bit useless in this
[16:18] <ailleantsian> janicko: have a look here http://www.linuxquestions.org/linux/answers/Networking/NdisWrapper_The_Ultimate_Guide
[16:18] <abhijit> cyphase, omg! i just tryied k3b and now it is showing that iso image it written. just wait. i restart pc and test it. thanks :)
[16:18] <abhijit> brb
[16:18] <llutz> cvt is in xserver-xorg-core
[16:19] <Stale> Based on the forum antedotes, I believe that the 8.04 release is the most stable version of all.
[16:19] <codeforkjeff> hello... i installed compiz settings manager and restarted; now when i log in, the top and bottom menus on desktop are gone. anyone have any ideas?
[16:19] <erUSUL> llutz: just checked; thanks
[16:19] <jiffe> is there no apt package for php-zlib?
[16:19] <reggi> thanks erUSUL i'll google that and see if i can do it.
[16:20] <cypher-neo> stale: 8.04 is stable, but also out of date.
[16:20] <tucemiux> janicko, read ailleantsian 's comments, he seems to have knowledge of belkin wireless, ive never used those and in either case, you need to find out what belkin card you have,  if it's a laptop you can probably start by looking at your machine, it's a packard bell?? there should be a model number associated with the machine but as I dont use that hardware I cant help you, someone who has might be able to help you
[16:20] <janicko> lelle: how do i get it?
[16:21] <cypher-neo> stale: 10.04 is the current long-term-release candidate. Which means that is the current stable release, and up-to-date.
[16:21] <Json> ikonia, If your still around, thanks a million. Umm, can I undo it (the arrangement) after I'm done ? I only want it temporarily.
[16:21] <slow-motion> hi
[16:21] <_Brandon_> hi, is there a virtual keyboard that automatically show itself when selecting a text input?
[16:22] <Stale> cypher-neo: Is there a later release that is also stable as 8.04? I will install a minimal Ubuntu on some old Dell PC (125 RAM), but I do not want any loose bugs around.
[16:22] <kiamo> where do I go to see what changes where made with the kernel update that came out last week?
[16:22] <cypher-neo> stale: 10.04 is stable.
[16:23] <Danielsblug> _Brandon_, I have no experience with virtual keyboards but there are some in Ubuntu Software Center, check them out. Maybe you'll find one that suits your needs.
[16:23] <cypher-neo> Stale, LTS releases are always released for stability.
[16:23] <ailleantsian> hopefully someone can help me, i have just installed nvidia drivers on reboot get error, had a look at x log and then kernel log which can be seen here :http://pastebin.com/tAVzTgJr
[16:23] <_Brandon_> Danielsblug: I tried them already, couldn't find anything good, thanks anyway
[16:23] <Danielsblug> _Brandon_,  Look for 'Keyboard'.
[16:23] <mbeierl> another go nowhere question: why is my X process taking up nearly 1g of physical memory since upgrading to Lucid?
[16:24] <Stale> cypher-neo: Even though there are forum complaints of 10.04 (those complaints are also out-dated)?
[16:24] <Danielsblug> _Brandon_,  Ohh I see, sorry then.
[16:25] <cypher-neo> Stale, I don't know what the forums say. I don't read forums unless I have problems and want to confirm that someone else is having the same problem.
[16:25] <jiffe> why can I use less with a file and have key availability such as up/down/q but when I pipe php -i | less these keys do not work
[16:25] <jiffe> I get things like ^[OA instead
[16:25] <cypher-neo> Stale, I've been using 10.04 since the day it was released. It is a little different from previous releases, but I've seen nothing that has been so severely crippling that I would need to go to an earlier version.
[16:26] <RenatoSilva> There was any recent change in behavior of /var/log/auth.log? It seems the system hopefully won't log wrong passowords in this file anymore...
[16:26] <codeforkjeff> whats the name of the process for the gnome main menu? (the bar at the top with applications, settings,etc)?
[16:26] <cypher-neo> Stale, If you're so worried about it, you can download the ISO image, burn it to a CD and preview it.
[16:26] <abhijit> cypher-neo, hey k3b works!!!
[16:26] <cypher-neo> Stale, Preview mode is excellent for trying out new releases.
[16:27] <cypher-neo> abhijit, Glad to hear. :D
[16:27] <Stale> cypher-neo: That is alright with me. The only other thing I wanted to know is that in your experience, what was the most stable Ubuntu release?
[16:27] <cypher-neo> Stale, 10.04 is the most stable I've seen.
[16:28] <farmer-> whois Adam_Johnston
[16:29] <Stale> cyphrer-neo: Okay, thanks for your help, cypher-neo.
[16:29] <cypher-neo> Stale, The only quirks in 10.04 was that one of the desktop themes has the icons on the other side of the window (which I actually liked), and there are extra security options on Wine which require you to be in su- to install programs.
[16:29] <cypher-neo> Stale, But those are easily handled.
[16:29] <abhijit> hey i was disconnected!
[16:29]  * abhijit bans @!BraseroDiscBurning!
[16:30] <Stale> cypher-neo: okay, that is good to know beforehand. Thanks cypher-neo.
[16:30] <cypher-neo> You're welcome Stale
[16:30] <abhijit> how to tell gnome-do to remember twitter username & password?
[16:31] <cypher-neo> abhijit, Normally the password is contained in the gnome-keyring
[16:31] <Adam_Johnston> Hey, I have a problem, if no-one minds helping out? :)
[16:31] <trainer1> docking/undocking my laptop caused my x server config to get hosed and now I can't even boot up, how do I recover?
[16:32] <abhijit> cypher-neo, have you used gnome do for twitter?
[16:32] <Monkey_Dust> !ask Adam_Johnston
[16:32] <Monkey_Dust> !ask |Adam_Johnston
[16:32] <cypher-neo> abhijit, Do you mean using the Twitter package, or a plugin on Gnome-Do?
[16:33] <rainrain> new to ubuntu - musing  karmic - i have a message at the top of my update manager offering me an uptdate to lynx - would this erase my settings or files and does it take a long time typically
[16:33] <abhijit> cypher-neo, twitter plugin in gnome do
[16:33] <RenatoSilva>  In Ubuntu, when you try to log in and fail, your wrong password used to get logged in /var/log/auth.log
[16:33] <RenatoSilva> But I've noted it has changed now. The entry just says auth failure for user xyz without mentioned the typed password
[16:33] <abhijit> !manual | rainrain
[16:33] <RenatoSilva> Any highlights?
[16:34] <cypher-neo> abhijit, Oh. Sorry. I haven't used the Gnome-Do twitter plugin. I just manually dropped the Twitter program into Gnome-Do
[16:34] <Monkey_Dust> rainrain: make backups of your important files and simply install lucid from cd, it's much faster than dist-upgrade
[16:34] <abhijit> cypher-neo, ok
[16:34] <erUSUL> rainrain: nothing would be removed. the time it takes dpends on the download speed you will ahve to download at leat 700 MiB or more of new packages
[16:34] <cypher-neo> abhijit, And actually, I don't use Gnome-Do now. I use Cairo/GLX-Dock
[16:34] <rainrain> erUSUL: thanks
[16:35] <abhijit> cypher-neo, i am talking about gnome do launcher not about the dock
[16:36] <rainrain> is lynx worth the upgrade from karmic - anything interesting i didnt notice anything in particular myslef but im a newbie ?
[16:36] <Adam_Johnston> I've just done a fresh install on my laptop, the only problem during the installation being the fact that the reolution wasn't correct, but after it finished, the screen when corrupt. I tried a reboot, and it booted fine, only with the higher resolution (1600 x 1200, when I have 1280 x 800) So I tried to change the resolution to the correct one, and the screen went corrupt again (this...
[16:36] <Adam_Johnston> ...happens with all other resolutions as well)
[16:36] <Adam_Johnston> A friend recommended editting my xorg.conf file, however, when I went to edit it, it had nothing in it :S
[16:36] <Adam_Johnston> (I'm also incredibly new to Ubuntu, btw)
[16:36] <FloodBot2> Adam_Johnston: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[16:36] <abhijit> rainrain, try lucid from livecd first if you like it then upgrade
[16:36] <gnusiva> hi all, anyone knows any free ssh to host our python daemon
[16:37] <Adam_Johnston> Oh, sorry
[16:37] <rainrain> abhijit: wow the obvious often eludes - thanks
[16:39] <user_> hi
[16:40] <milen8204> which program for torrents download is moust popular ?
[16:40] <abhijit> !best | milen8204
[16:40] <user_> touch screen irtouch non funziona
[16:40] <unswd> milen8204:transmission
[16:40] <simar__mohaar> milen8204: Transmition Bit torrent client
[16:40] <milen8204> thanks
[16:40] <rainrain> anyone here using ubuntu for professional web development - wondering if running browsers under wine gives the exact same rendering as same apps under windows or not
[16:41] <simar__mohaar> !best | simar__mohaar
[16:41] <iceroot> rainrain: use the native system and not wine for that
[16:41] <iceroot> rainrain: maybe try vbox
[16:41] <qjcg> in tightvncviewer, how can i ensure my keypresses are grabbed by the remote session? eg, when I do an ALT-P, it's being grabbed by my local window manager...
[16:41] <rainrain> iceroot: native system ??
[16:42] <rainrain> iceroot: windows you mean
[16:42] <iceroot> rainrain: i guess you want the internet-explorer (all other browsers are also for linux)
[16:42] <unswd> will knight online running on wine?
[16:42] <iceroot> !appdb | unswd
[16:42] <rainrain> iceroot: sorry im not following you
[16:42] <milen8204> IF torrents are made whit another torrent program are they accessable for bit tirrent ?
[16:42] <riot> what could be the reason why optical drives don't appear/work in kubuntu?
[16:43] <erUSUL> riot: dunno; dmesg could have some clue...
[16:43] <riot> erUSUL: http://nopaste.info/cdf69ff0f8_nl.html
[16:43] <user_> irtouch touchscreen not function left-right is ok.... up-down is inverted any idea?
[16:44] <rainrain> iceroot: sorry what do you mean by native system, do you mean windows, that i should just use windows for testing
[16:44] <lorenzo_> #ubuntu-it
[16:44] <EdwardL> Hello. I seem to have been away from Linux far too often. Trying to make a Samba share, however SMB is not showing up in the list in the Share Folder properties. I might be doing something wrong, maybe I've forgotten how to make sure smb is properly installed.
[16:44] <lorenzo_> #ubuntu-it-chat
[16:45] <abhijit> lorenzo_, type /join #ubuntu-it
[16:45] <Gibby1313> how long should resize2fs take to shrink a LVM from 475G to 160G in a raid 1 config with 3G/sec sata drives?
[16:45] <erUSUL> riot: i see them both in dmesg . /dev/sr0 and /dev/sr1
[16:46] <Tomwa> Hey peeps
[16:46] <riot> erUSUL: yes, but k3b, konqueror don't see them and mounting doesn't work either
[16:46] <abhijit> hi
[16:46] <Tomwa> I have a problem with Ubuntu not detecting my monitor
[16:46] <erUSUL> riot: try manually « sudo mount -t auto /dev/sr0 /media/cdrom/ »
[16:47] <Tomwa> It says "Unhandled monitor type 0" in the start up so I have to launch ubuntu in failsafex graphics mode
[16:47] <Tomwa> Anyone know a solution?
[16:47] <tucemiux> riot, has the optical drive ever worked?  my DVD rom used to work, now it looks like it's dead :-(
[16:48] <riot> tucemiux: yes, on suse before installing kubuntu
[16:48] <riot> erUSUL: mount: /dev/sr0: Unknown device
[16:48] <Wiesshund> tomaw what kind of monitor?
[16:48] <riot> erUSUL: ls /dev/sr0 shows its there :/
[16:48] <tucemiux> Tomwa, did you install the drivers for your video card?
[16:48] <ailleantsian> tomaw: what graphics card?
[16:49] <Tomwa> tucemiux: I have not I went to the catalyst site for drivers for my ATI Radeon 5870 and could not find any linux/ubuntu drivers
[16:50] <Wiesshund> tomaw click System > Admin > Hardware
[16:50] <erUSUL> riot: weird... could have to do with the irq problem there... but if so i dunno how to fix it
[16:50] <tucemiux> Tomwa, that is the first step, ask someone to help you configure the drivers for your ATI Radeon 5870, I dont use ATI hardware because I heard they dont play nice with linux but someone who has your hardware may be able to help you, ask again only this time the correct question, all in one line
[16:51] <Gibby1313> how long should resize2fs take to shrink a LVM from 475G to 160G in a raid 1 config with 3G/sec sata drives? it has been running for over 26hrs
[16:52] <Wiesshund> Ive got ATI hardware. he should be able to enable the driver in system > admin > hardware. it should be there just not in use
[16:52] <tucemiux> riot, is ubuntu even picking up your optical drive: sudo lshw -C
[16:52] <ekkelett> hi; completely clean NTFS mount, chkdsk reports nothing wrong and nothing is attached, however, wubi still won't boot with the error code 16 & saying that I need to boot into windows and chkdsk then reboot again.
[16:52] <tucemiux> Tomwa, apparently Wiesshund can help you, he uses ATI hardware
[16:52] <Tomwa> Wiesshund; your right :) It's there but I get "SystemError: installArchives() failed
[16:52] <ekkelett> basically, everything seems to be alright, except damn wubi won't boot.
[16:53] <Json> ikonia, Umm, you there ?!
[16:53] <ikonia> Json: hi
[16:53] <Wiesshund> Tomwa hmm. thinking
[16:54] <Json> ikonia, Glad to have you back. Thanks a million. Umm, can I undo it (the arrangement) after I'm done ? I only want it temporarily.
[16:55] <nilsma> what program would i use to create an image file (.iso) from a CD/DVD? (not brasero, dont seem to work for me)
[16:55] <ikonia> Json: just remove the line you put in, in /etc/fstab
[16:55] <ikonia> Json: glad your working
[16:55] <abhijit> nilsma, k3b
[16:55] <abhijit> !k3b | nilsma
[16:55] <Json> ikonia, Only that and it's undone ? Entirely ? Err, I only waited to thank you :) !
[16:56] <nilsma> abhijit: thanks :)
[16:56] <ikonia> Json: it really is that simple
[16:56] <ikonia> Json: I appreciate the thanks and waiting to say thanks
[16:56] <user_> irtouch touchscreen don't works left-right is ok.... up-down is inverted any suggestion
[16:56] <thune3> nilsma: should be able to "cat /dev/dvd > dvd.iso" for data cd and data dvd.
[16:56] <tucemiux> nilsma, i use brasero
[16:57] <abhijit> ubottu dont know abotu brasero? :(
[16:57] <Json> ikonia, Great !! Any way to reach to your level ?? Any book ? I know it sounds a bit fanboyish, but I'd like to return the favour on this channel some day.
[16:57] <Tomwa> Wiesshund: any update?
[16:57] <Wiesshund> Tomwa, going to msg you some things
[16:57] <MadRobot> How do I downgrade LibSDL?
[16:58]  * M3de is away: Estoy ocupado
[16:58] <abhijit> !away > M3de
[16:58] <ikonia> Json: help with what you can, and just use linux, experience will grow, no secret
[16:58] <ikonia> Json: helping a user reset a password is just as valuable to the user as what we've just done
[16:58] <noahir> ikonia: :,(
[16:59] <pdlnhrd> is sun's official packages in the ubuntu repository?  i am using 10.4 and can't seem to find them
[16:59] <EdwardL> Help! Why can't I see SMB as one of my sharing options?
[16:59] <philinux> pdlnhrd: enable the partner repo
[17:00] <noahir> I cant set that language :(
[17:00] <pdlnhrd> philinux:  through software sources?
[17:00] <philinux> yep
[17:01] <kratos_ppc> hola
[17:02] <kratos_ppc> un saludo a todos
[17:02] <Pici> !es | kratos_ppc
[17:02] <eino> hello! I'm trying to install ubuntu 10.04 from a usb pen drive, but my screen goes blank every time the ubuntu splash logo diappears and the welcome song plays out (No Signal Detected). I'm using ATI Radeon HD5770. People with the same issue have reported that when they added "nomodeset" (without ""s) it worked, but I haven't been lucky with that. I tried pressing TAB in the boot screen and
[17:02] <eino> added nomodeset and pressed enter, but it didn't work. How can I get this to work?
[17:03] <Frots> hi
[17:03] <pdlnhrd> philinux: still no luck... it only lists partners for jaunty even though i am on lucid.  i enabled the one for jaunty ran sudo apt-get update and did a apt-cache search for sun and there is no jre or jdk
[17:03] <Frots> I am having issues with pinging to outside
[17:03] <Frots> can anyone help me?>
[17:04] <Frots> this is my ipconfig
[17:04] <Frots> eth0      Link encap:Ethernet  HWaddr 00:03:0D:9A:0E:D6
[17:04] <Frots>           inet addr:91.218.165.103  Bcast:91.218.165.255  Mask:255.255.254.0
[17:04] <Frots>           inet6 addr: 2001:67c:2a4:0:203:dff:fe9a:ed6/64 Scope:Global
[17:04] <Frots>           inet6 addr: fe80::203:dff:fe9a:ed6/64 Scope:Link
[17:04] <Frots>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
[17:04] <FloodBot2> Frots: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[17:04] <Frots>           RX packets:266101 errors:0 dropped:0 overruns:0 frame:0
[17:05] <Jfry> ikonia, (json) Well that's encouraging. Thanx once again, I'll be on my way.
[17:05] <philinux> pdlnhrd: your software sources dont sound right. If you are using lucid they should be like this. http://paste.ubuntu.com/477012/
[17:05] <Frots> !help
[17:05] <tucemiux> Frots, if you want to write mutiple lines you have to use paste bin
[17:05] <Frots> pastebin?
[17:05] <abhijit> !paste | Frots
[17:05] <Frots> but I cant even ping to outside
[17:06] <tucemiux> Frots, youre chatting right now??
[17:06] <philinux> pdlnhrd: Or at least similar
[17:06] <ramk> i need help fixing ubuntu sound
[17:06] <Oer> Frots, you did paste it here, so you can paste it on pastebin.
[17:06] <Frots> tucemiux: yes, but I think that's an already established connection
[17:06] <Monkey_Dust> !ask| ramk
[17:07] <ramk> i have bought a new Dell inspiron 14 R (N4010) and sound from the speakers were working
[17:07] <ramk> i tried installing and uninstalling to hear sound from ear phones
[17:07] <kamil_> I have gconf related problem can someone help me with that?
[17:07] <ramk> that screwed all the audio
[17:07] <tucemiux> Frots, try to use a browser, if you cant use paste bin then ask more questions otherwise Im going to think youre trolling
[17:07] <ramk> now no sound
[17:07] <Frots> tucemiux:
[17:07] <tucemiux> ramk, reinstall alsa
[17:08] <Frots> I am now using something
[17:08] <Frots> via usb key to other machinbe
[17:08] <Frots> if you have a minute
[17:08] <Wiesshund> Frots what is your problem exactly? on one line not 10 diff 3 word entries
[17:08] <tucemiux> Frots, just ask your question, all in one line, if you need more than one line, use paste bin, eventually someone who can help you will
[17:08] <Frots> tucemiux: http://pastebin.com/UrPLa2Ta
[17:08] <abhijit> !enter | Frots
[17:09] <Frots> Ok, I am not able to ping outside, I can't start connections. this is my ip config http://pastebin.com/UrPLa2Ta
[17:09] <kamil_> I have gconf related problem can someone help me with that?
[17:09] <eino> hello! I'm trying to install ubuntu 10.04 from a usb pen drive, but my screen goes blank every time the ubuntu splash logo diappears and the welcome song plays out (No Signal Detected). I'm using ATI Radeon HD5770. People with the same issue have reported that when they added "nomodeset" (without ""s) it worked, but I haven't been lucky with that. I tried pressing TAB in the boot screen and
[17:09] <eino> added nomodeset and pressed enter, but it didn't work. How can I get this to work?
[17:09] <abhijit> No matter whatever software I use, i need to go twice to burn disk.
[17:10] <ramk> tucemiux, i tried that. doesnt work.. my sound preferences -> output tab -> shows dummy output.. i had 5 output devices before i screwed up things trying to fix ear phones audio
[17:10] <Frots> Wiesshund was my previous message long enough? Could you help me? or tucemiux ?
[17:10] <pdlnhrd> philinux... thanks i got it fixed now
[17:10] <Wiesshund> Frots try ping 74.125.65.147
[17:11]  * philinux nice one
[17:11] <Tomwa> Wiesshund?
[17:11] <Frots> Wiesshund: unknown host :(
[17:11] <Wiesshund> tomaw ?
[17:11] <tucemiux> Frots, you just showed me the output of "ifconfig', you have an IP, so far so good, now a description of the problem: all in one line
[17:11] <abhijit> help
[17:11] <kuttan_> Hello Allllllllllllllllllllllll!
[17:11] <riot> tucemiux: http://nopaste.info/94796b7440.html << they're both in there
[17:12] <Tomwa> Wiesshund: I rebooted but my monitor still hibernates after ubuntu starts up so I still have to run it in failsafe graphics mode
[17:12] <kuttan_> abhijit, yes ?
[17:12] <abhijit> kuttan_, No matter whatever software I use, i need to go twice to burn disk.
[17:12] <Frots> tucemiux: ok, I cannot ping outside. I cannot "start" new connections. I can ping myself though and I can still use my currect ssh connection over which I use this IRC thing.
[17:13] <Wiesshund> tomaw dont have a spare monitor handy do you?
[17:13] <kuttan_> abhijit,  have you tried good old dd
[17:13] <linwengao> good
[17:13] <ramk> tucemiux, i can see u are busy.. plz ping me when u are free..
[17:13] <linwengao> 中文
[17:13] <Wiesshund> Frots how are you obtaining your ip addy and dns ?
[17:13] <maco> !cn | linwengao
[17:13] <Frots> Wiesshund: what?
[17:14] <tucemiux> ramk,  reinstall alsa drivers, look for the "Refreshing/Reinstalling the drivers" portion: https://help.ubuntu.com/community/SoundTroubleshooting
[17:14] <Frots> Wiesshund: I use 8.8.8.8 as dns and you can see I have my IP (public)
[17:14] <devkhadka> is there any option other than auto in ls --color = auto
[17:14] <abhijit> kuttan_, i dont want command line tool.
[17:14] <Tomwa> Wiesshund: I dont have a spare monitor :(
[17:14] <Wiesshund> Frots isnt what i asked.
[17:14] <ramk> tucemiux, i ll try that. thanks
[17:15] <Frots> Wiesshund: please explain your question
[17:15] <VCoolio> devkhadka: always and never, read 'man ls'
[17:15] <Tomwa> Wiesshund: could something have gone wrong during the driver install? The ati panel won't open and says "No ATI graphics driver is installed, or the ATI driver is not functioning properly. Please install the ATI driver appropriate for you ATI hardware, or configure using aticonfig.
[17:15] <Tomwa> "
[17:15] <tucemiux> ramk, and from what i have experienced, you can reinstall the drivers fine and it will work however some things will need to be manually configured, for that you will need to read the entire page and get the exact drivers that you need, that page will show you how, ive never bothered -- once I got sound working I didnt care that the buttons on my laptop no longer worked
[17:16] <Wiesshund> tomaw ok, not end of the world. i think you will need to edit your xorg config by hand, and set a resolution that your monitor is happy with
[17:16] <ramk> ok
[17:16] <droes> Does anyone know how to merge search bar and adress bar in midori?
[17:16] <Tomwa> Wiesshund: How do I go about that?
[17:16] <Wiesshund> toman failsafe mode doesnt load the driver (its fail safe )
[17:16] <tucemiux> riot, my mistake
[17:16] <Tomwa> Wiesshund: that'd explain why it doesn't find the driver then lol
[17:16] <devkhadka> VCoolio,  i mean for color options
[17:17] <Frots> Wiesshund: did you mean if I use DHCP? because I don't use DHCP, I use static IP address and dns
[17:17] <Wiesshund> Frots how are you obtaining your ip address?
[17:17] <tucemiux> riot, apparently it's: sudo lshw -C disk
[17:17] <devkhadka> VCoolio, i want to change color scheme
[17:17] <Frots> Wiesshund: I just replied to you above
[17:17] <kuttan_> is trafficserver not availble in ubuntu
[17:18] <Aemaeth> how would i set a while loop (in dash) to take a value in from read and use that later in the code?   basically i need to pop a read value into a string to finish code later and i'm having some syntax issues.  I'm trying to achieve while( lineoftext=(read(file.txt))) do blah blah $lineoftext done
[17:18] <tucemiux> riot, the command you used gave you everything including the information we need, the command i just gave you will give you specific information that we can use
[17:18] <devkhadka> VCoolio, 777 format directory are  higlighted with green color and text is also green so i want text to be yellow how can i change that
[17:18] <riot> tucemiux: but the drives appear there
[17:18] <Wiesshund> Frots then youve something set wrong, ip out of range, wrong gateway, etc. if you can ssh to a local then your equipment works fine
[17:18] <tucemiux> riot, are you trying to use a CD or DVD or what ??
[17:18] <sacarlson> frots: for static IP address did you have to disable network-manager?
[17:18] <droes> Does anyone know how to merge search bar and adress bar in midori?
[17:18] <tucemiux> Frots, could be a dns issue
[17:19] <riot> tucemiux: both don't work
[17:19] <Aemaeth> or really, if there's some good documentation on dash out there, i would be happy to read up, but so far have found very little
[17:19] <VCoolio> devkhadka: change the 'LS_COLORS' variable in .bashrc or something; use 'dircolors' to find out current settings
[17:19] <abhijit> cd buring help
[17:19] <abhijit> droes, there is channel #midori
[17:19] <Oer> abhijit, burn slow x4 or x8
[17:19] <Castiglio> join #seraphimRage
[17:20] <ramk> tucemiux, sudo aplay -l
[17:20] <ramk> aplay: device_list:223: no soundcards found...
[17:20] <abhijit> Oer,  No matter whatever software I use, i need to go twice to burn disk.
[17:20] <droes> thanks abhijit, wasn't aware of that :)
[17:20] <abhijit> droes, me too!!! just discovered!!! :)
[17:20] <tucemiux> riot,  check to see if you have a mount point for the cdrom under /media, you should have something like "/media/cdrom"
[17:20] <droes> haha :p
[17:20] <Oer> abhijit, , that is only possible on a cd-rw
[17:20] <vot> hi guys
[17:20] <Monkey_Dust> !hi|vot
[17:20] <riot> yes, i created one, but mount says /dev/sr0 were an unknown device (though it is there)
[17:21] <vot> im trying to modify a kubuntu disk but what im doing should be the same in ubuntu
[17:21] <vot> i have changed the system to boot into  text mode
[17:21] <abhijit> Oer, by the two time i mean first time it only predend to be writing image. but it actuallly dont write anything. and second time it actually writes the data.
[17:21] <vot> and i want to configure the interfaces for boot time
[17:21] <vot> where is the configuration for interfaces at boot time
[17:21] <Wiesshund> vot put question all on one line or its going to be 1) lost 2) become spam
[17:22] <abhijit> vot, try this http://uck.sourceforge.net/
[17:22] <Monkey_Dust> vot: put your question is one single line please, so we don't have to scroll up
[17:22] <tucemiux> riot, then you mount the device to "/media/cdrom", which is why we wanted to know what device your hardware was using in the first place, the command is: sudo mount [DEVICE] /media/cdrom ---for [DEVICE] try putting the devices you got from the link you gave me, you already tried /dev/sr0
[17:22] <vot> abhijit, this is an install
[17:23]  * abhijit just wonders what if they named if Free Ubuntu Customization Kit? 
[17:23] <abhijit> !details | vot
[17:23] <abhijit> !enter | vot
[17:23] <sacarlson> vot I'm not sure what interfaces you need at boot time maybe for like pxeboot?
[17:23] <tucemiux> ramk, that means you have to install the drivers, your sound card isnt even being recognized, have you tried rebooting your machine?
[17:24] <Monkey_Dust> reboot = the window$ trick
[17:24] <vot> sacarlson, the main thing i need is eth1 to be configured at boot so i can run a media server
[17:24] <sacarlson> vot: shortly after boot the intefaces will be set at /etc/network/interfaces
[17:25] <guitar-maniac> Hey! where shuold i cpy my music so that everyuser in the computer can acces it on their profiles?
[17:25] <abhijit> vot, have you tried ubuntu customization kit? y/n? software center tell me that we can add some scrits etc too
[17:25] <ramk> tucemiux, yeah i tried, also, when i say "lspci -v | less" i can see "00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)"
[17:25] <abhijit> guitar-maniac, /home/usr
[17:25] <bathacid> hello
[17:25] <guitar-maniac> abhijit: thank you!
[17:25] <Monkey_Dust> !hi| bathacid
[17:26] <abhijit> guitar-maniac, also you man need to set permissions for them i.e. who can read,write,execute etc
[17:26] <bathacid> i was wondering if i just installed red alert 2 with wine and the game works well its just my mouse disappers
[17:26] <vot> sacarlson, it has no reference to eth0 in it at all ... but it uses dhcp at boot
[17:26] <farmer-> whois Adam_Johnston
[17:26] <abhijit> guitar-maniac, also if you user a want to share something with user b then user a can put that things in his /Public folder and empower user b to access his /Public
[17:27] <doobiest> anyone from this channel at linux con?
[17:27] <abhijit> farmer-, its /whois <nick>
[17:27] <abhijit> doobiest, yes why?
[17:27] <guitar-maniac> abhijit: ok.. that public folder wuold be better way.. sounds easier.
[17:27] <sacarlson> vot: what interfaces?  you can set it there
[17:27] <tucemiux> !ot| doobiest
[17:27] <abhijit> guitar-maniac, yah
[17:27] <Guest37507> ciao
[17:27] <Guest37507> !lisy
[17:27] <Guest37507> !list
[17:27] <doobiest> ah just wondering if anyone on idling in here was at the conference too.. i'll switch to the offtopic channel thanks
[17:28] <guitar-maniac> abhijit: the publec folder isn made by default? i can just create a file called public
[17:28] <sacarlson> vot: that's were you setup for static I'll give you an example
[17:28] <doobiest> !guidelines
[17:28] <guitar-maniac> sorry about the typos!
[17:28] <abhijit> guitar-maniac, ide made by default
[17:28] <abhijit> guitar-maniac, its in /home/<username>/Public
[17:28] <vot> sacarlson, how does it know eth0 should be dhcp it just has auto lo, interface lo inet loopback, does it assume dhcp by default.. what if i want one down at boot?
[17:29] <guitar-maniac> Abhijit: how do i define the rights for this file?
[17:29] <abhijit> !permissions | guitar-maniac
[17:30] <sacarlson> vot: http://paste.ubuntu.com/477023/ is my example
[17:30] <AshWatson> can someone help me with grub cause noone is talking in #grub
[17:30] <abhijit> guitar-maniac, http://en.wikipedia.org/wiki/File_system_permissions#Octal_notation
[17:30] <Monkey_Dust> vot: try something like this http://paste.ubuntu.com/477024/
[17:30] <sacarlson> vot: that's the default settings I guess
[17:30] <abhijit> guitar-maniac, http://en.wikipedia.org/wiki/File_system_permissions
[17:30] <vot> yea i get the file , but was just a bit miffed to why eth0 was auto up without any config
[17:31] <AshWatson> anyone ?
[17:31] <abhijit> !details | AshWatson
[17:31] <sacarlson> vot: i think it's setup at boot if not set in interfaces with network-manager I'm not sure
[17:31] <AshWatson> ok
[17:31] <cypher-neo> bathacid, What kind of game are you running Wine?
[17:31] <ramk> tucemiux, did something using modprobe.. going to restart now..
[17:31] <bathacid> red alert 2
[17:32] <AshWatson> i installed ubuntu and done a load of updates including updating grub and when i restarted i got an error saying....
[17:32] <tucemiux> ramk, sorry but I'm afraid you will have to follow the guide, the times i've hosed my audio I just renistalled alsa and it worked, looks like you have to configure the drivers and everything in the guide
[17:32] <AshWatson> error: no such device: (number + letters).
[17:32] <AshWatson> grub rescue>_
[17:32] <AshWatson> and i keep gettin that error, i cant boot up in any os
[17:32] <AshWatson> i have a livecd and an external cd drive
[17:32] <AshWatson> how do i fix it ?
[17:32] <Wiesshund> AshWatson you were the guy lastnight with the wubi install?
[17:33] <AshWatson> erm yes
[17:33] <cypher-neo> bathacid, You may need to upgrade your Wine version. The mouse problem you describe was fixed in Wine 1.1.42 and later.
[17:33] <AshWatson> i was told to get a livecd so i got one and nnow i need to know how to fix it
[17:33] <cypher-neo> bathacid, If you're using Lucid 10.04, just install the Wine 1.2 default package
[17:33] <philinux> AshWatson: Solution is in here. http://ubuntuforums.org/showthread.php?t=1195275
[17:33] <bathacid> ok
[17:33] <Wiesshund> bathacid install wine 1.2 and problem should be resolved
[17:33] <abhijit> guitar-maniac, you got me?
[17:34] <philinux> AshWatson: Although I'm not sure how to fix wubi grub problems.
[17:34] <noo> Hello I'm using the newest version of ubuntu and I'm trying to make the belkin wlan usb stick F6D4050 run under ubuntu. Can some1 help me? I have no clue what to do...
[17:34] <bathacid> only wine that i see in synaptic package manager is 1.1.42
[17:34] <Yadira> is there a way of having a list of installed sofwares thar runs on terminal,,for backup purposes
[17:34] <Alias01> can i install ubuntu from a usb pendrive to the same pendrive? my hdd is dead
[17:34] <nullwire> Is there anything negative when adding/updating an index frequently (like 100 times a second)?
[17:34] <abhijit> Alias01, yes you can install ubuntu to usb pen drive.
[17:34] <bathacid> do i need to get it from the wine hq site?
[17:35] <AshWatson> philinux, i go on that and when i type the command grub-install -v is says unknown command
[17:35] <sacarlson> Yadira: yes
[17:35] <sweet> Hello
[17:35] <danieldd> Hello
[17:35] <Alias01> abhijit, even if the source is the same pendrive?
[17:35] <cypher-neo> bathacid, No, it should be available in Synaptic.
[17:35] <cypher-neo> bathacid, Are you using Karmic or Lucid?
[17:35] <abhijit> Alias01, no
[17:35] <Yadira> how to do that sacarlson
[17:35] <sweet> Is there any Ubuntu gur who could answer a question
[17:35] <sweet> ?
[17:35] <sweet> +u
[17:36] <sacarlson> Yadira: good question
[17:36] <tucemiux> !ask | sweet
[17:36] <sacarlson> dpgk?
[17:36] <ramk> tucemiux, restarted and all the modules probed using "sudo modprobe snd-hda-intel" is gone !!?
[17:36] <AshWatson> also it wont let me boot through the cd
[17:36] <guitar-maniac> abhijit: yeah thanks! trying to figure this out with these links
[17:36] <danieldd> I have a small problem with Ubuntu. When I listen to Music on one program (for example, using the "Totem Media Player") and there is some other sound (For example, watching a video or getting a mail), there is a strange bass voice. Anyone know what might cause it?
[17:36] <abhijit> guitar-maniac, ok
[17:36] <sacarlson> kpkg -l
[17:36] <Kurlon> Is there a CIFS/SMB server that is JUST a CIFS/SMB server and nothing else?  I can't get Samba 100% reliable, Likewise is a LOT more functionality than I need.
[17:36] <cypher-neo> bathacid, Are you using Karmic or Lucid?
[17:36] <abhijit> Alias01, wait
[17:36] <sacarlson> Yadira: dpkg -l
[17:37] <tucemiux> Yadira, if you find an answer to that one let me know, for me -- i created a cheat sheet of all the appz , the cheat sheet basically contains the command used to install it, so everytime I reimage my machine I open up my cheat sheet and run those commands
[17:37] <abhijit> Alias01, see this http://www.linuxforu.com/teach-me/tips-tricks/install-linux-straight-from-an-iso/
[17:37] <tucemiux> ramk, sorry but I'm afraid you will have to follow the guide, the times i've hosed my audio I just renistalled alsa and it worked, looks like you have to configure the drivers and everything in the guide
[17:37] <sweet> ok. Once in a while, lucid boots but my monitor says "imput signal not in range" and does not display anything. This is a fresh install, and my GPU is ATI
[17:37] <riot> tucemiux: all of them seem to point to /dev/sr0 and all fail :/
[17:37] <AshWatson> anyone know what i do ?
[17:37] <Yadira> well tucemiux u can always use APTonCD
[17:37] <philinux> AshWatson: http://www.omaregan.com/?p=608 also gogle search "fix wubi grub2"
[17:37] <ramk> tucemiux, ok
[17:37] <Yadira> i creates a image(ISO)of installed aps
[17:37] <abhijit> Alias01, also you can use two pen drive? one to install and one to install from?
[17:37] <sweet> Do you have any ideas what could cause it ? Is this a known issue ?
[17:38] <sacarlson> Yadira: tucemiux: well it dpkg -l
[17:38] <nullwire> would updating an index constantly slow a server substantially?
[17:38] <Yadira> i cant create that even that i have the software installed because i delete cache
[17:38] <abhijit> !ati | sweet
[17:38] <Monkey_Dust> sweet: what is the issue?
[17:38] <Monkey_Dust> ok
[17:38] <sacarlson> tucemiux:  that's what gives you the list of all installed application on you ubuntu system
[17:38] <tucemiux> riot, what are you trying to use on your optical drive?  did you put a cdrom into the drive? try first a cd, like a music cd
[17:39] <AshWatson> philinux, i cant boot in windows so that wont help
[17:39] <Wiesshund> sweet it means your monitor is being asked to run a resolution/refresh rate, outside its capabilities
[17:39] <riot> tucemiux: several media
[17:39] <ramk> sacarlson u can issue the following command on terminal : dpkg -l | grep "myapp"
[17:39] <philinux> AshWatson: you need to reinstall the windows bootloader then. Instructions in grub2 basics thread.
[17:39] <sacarlson> dpkg -l  now who knows how to use that list to create a new system with the same packages?
[17:39] <kuttan_> any deb package available for this http://trafficserver.apache.org/index.html
[17:40] <sweet> Wiesshund: i know that. The trick is that it happens once in a while at bootup on a fresh install. Sometimes the display resolution at bootup is correct, sometimes it isnt
[17:40] <AshWatson> philinux, how do i do that cause i dont have a windows vista disc
[17:40] <sacarlson> ramk: that is correct
[17:40] <vot> well with a bit of prodding i think this will work
[17:40] <tucemiux> sacarlson, that's not specific enough though, what I need is appz that arent installed by default and I have to install manually, unless you upgrade you always have to install those appz manually when you install from an ISO
[17:40] <sweet> Wiesshund: wait how can you configure the refresh rate ?
[17:40] <Yadira> sacarlson,  that list does not have apps i have installed
[17:40] <Yadira> is too short
[17:41] <AshWatson> philinux, ive done acer eRecovery
[17:41] <Wiesshund> sweet you could just define its resolution in xorg.conf
[17:41] <ramk> sacarlson, this may not help.. but what i do is save all my apt-get install app1 app2 in google docs.. so when i do a fresh install next time is easy
[17:41] <AshWatson> and that didnt fix grub
[17:41] <abhijit> !fixgrub | AshWatson
[17:41] <Wiesshund> sweet http://ubuntuforums.org/showthread.php?t=83973
[17:41] <sacarlson> tucemiux: no that is the list of application that you have installed manualy at the point you ran the command
[17:41] <riot> tucemiux: all these media work on other machines
[17:41] <tucemiux> riot, if you have a live CD or an install CD I would try it just to make sure it's not a hardware issue
[17:41] <sweet> Wiesshund: I'll try fidgeting with that and see if it solves the issue, before filing a bug report on launchpad
[17:42] <sweet> Wiesshund: so it doesn't seem to be a known bug/issue
[17:42] <AshWatson> ye but i didnt lose grub after installing windows, windows was alreayd installed
[17:42] <abhijit> AshWatson, just have a look at once. all the instructions to FIX grub are there
[17:43] <AshWatson> i am looking but i cant boot from the livecd for some reason
[17:43] <AshWatson> so i cant go into terminal and reinstall it
[17:43] <riot> tucemiux: i used a dvd to install ubuntu just a few days ago. The hardware worked flawlessly on suse before that.
[17:43] <sweet> Thx for your help
[17:43] <riot> tucemiux: its clearly an ubuntu-related problem
[17:43] <Yadira> I want to generate a list of installed sofwares not in terminal
[17:44] <oCean_> Yadira: then where?
[17:44] <Monkey_Dust> Yadira: you can use Synaptic and show only installed software
[17:44] <tucemiux> riot,  all hardware has a life span, they tend to RIP when you least expected, I would at least try that option just to make sure it's not a hardware issue, just boot up into the CD/DVD live, if you succeed then you know the problem is with ubuntu
[17:45] <riot> tucemiux: two drives?! the drives work. I made sure.
[17:45] <Yadira> i can use sypnatic,,but can i generate a list so i can have for back up
[17:45] <sacarlson> Yadira: I think I found a more acurate answer but I think my list would still work http://www.cyberciti.biz/tips/linux-get-list-installed-software-reinstallation-restore.html
[17:45] <oCean_> Yadira: in terminal, yes
[17:45] <oCean_> !clone | Yadira
[17:45] <tucemiux> riot, then it's an ubuntu issue, i would file a bug report or look up your hardware in launchpad
[17:45] <Yadira> i run dpkg -l and have nothing,,just few i have a lot apps missing on that command
[17:46] <Oer> Yadira terminal > dpkg --get-selections > my-packages
[17:46] <riot> tucemiux: okay
[17:46] <jguzikowski> Anyone know why I can't get an address bar to show up in internet explorer on wine?
[17:46] <Oer> Yadira, then gedit my-packages
[17:46] <Yadira> i just want a list
[17:46] <sacarlson> Yadira: well it will only have what you used in apt-get not the custome compile stuf
[17:46] <Yadira> is that hard to do that ?
[17:46] <cryptk> jguzikowski: any particular why you are using IE through wine in linux?
[17:47] <Yadira> i did before
[17:47] <jguzikowski> cryptk, a particular flash thing isn't working in firefox on ubuntu
[17:47] <Yadira> someone here help me do that
[17:47] <AshWatson> so any other ways i could fix grub or a way i can boot to livecd
[17:47] <Yadira> and it was extremly easey
[17:47] <oCean_> Yadira: you have had many suggestions
[17:47] <Oer> Yadira, read back please
[17:47] <Adys> A friend of mine has an i3 530 and keeps getting into low graphics mode. He's using nomodeset in grub, otherwise it doesn't boot. dmesg: http://pastebin.com/yfBmdWwc -- Xorg.0.log: http://pastebin.com/wYBa5C76
[17:47] <sacarlson> Yadira: not sure what is hard or what you are asking?
[17:47] <Adys> Anyone able to help?
[17:47] <philinux> AshWatson: is the bios set to boot from cdrom first.
[17:47] <cryptk> jguzikowski:  check the wine-hq website
[17:47] <Yadira> i want a text list of installed app
[17:48] <AshWatson> philinux, yes
[17:48] <AshWatson> opeiotn 1 cd drive
[17:48] <oCean_> Yadira: you've had many suggestions. Stop repeating
[17:48] <philinux> AshWatson: so what happens with livecd
[17:48] <AshWatson> option 2 hdd
[17:48] <AshWatson> i put it in and it just goes straight to the error < philinux
[17:48] <sacarlson> Yadira:  well I think you now have three methods the one with the link had the method of the list and restore
[17:48] <Yadira> u giveimg me the same answer stop repeating
[17:48] <cryptk> Yadira: dpkg -l | grep "^ii"
[17:49] <cryptk> that will give a list of installed packages
[17:49] <philinux> AshWatson: sounds like the livecd not booting at all then
[17:49] <shsek> I'm getting "ALERT! /dev/mapper/foobar-root does not exists" error on boot (after messing up some stuff with initramfs-tools), but I can access my filesystem via the rescue mode of the Ubuntu Server CD. I think its because the LVM2 module isn't loaded properly. How do I tell initramfs to load this module?
[17:49] <AshWatson> philinux, so how would i fix this ?
[17:50] <philinux> AshWatson: try the livecd in another machine see if it's ok
[17:50] <mcunix> scusate come faccio a impostare il mio file .mailrc per mailx??
[17:50] <AshWatson> only thing is i dont really have another machine
[17:50] <oCean_> !it | mcunix
[17:50] <tucemiux> Yadira, youve been given plenty of suggestions, I suggest you now try the forums
[17:50] <Pici> t/ll Yadira 10
[17:50] <philinux> AshWatson: Friends pc
[17:50] <Pici> oops, sorry.
[17:50] <mcunix> sorry;-D
[17:51] <Pici> Yadira: What is wrong with the suggestions that you've been given?
[17:51] <sacarlson> AshWatson: so you don't have a live boot cd?
[17:51] <randomman> can someone help me what with my sed script please? http://paste.ubuntu.com/477033/
[17:51] <SomeoneE1se> I'm trying to ping a box on my local network via it's hostname, and every so often it just doesn't work any more.  Any thoughts on why localhost names will just stop working?
[17:51] <AshWatson> i do have a live boot cd
[17:52] <Monkey_Dust> Yadira: if the solutions above do not help, than maybe what you want is not possible
[17:52] <sacarlson> AshWatson: so what is it you can't do?
[17:52] <Yadira> it is posible
[17:52] <cryptk> randomman: echo file.txt.svn-base | sed -e "s/.svn-base//"
[17:52] <Yadira> and is no as hard as u guys what to get me into
[17:52] <AshWatson> it wont boot from the cd, i choose cd/dvd drive and it just goes to the error
[17:52] <Yadira> it is a simple task
[17:52] <Dr_Willis> SomeoneE1se:   how is the network getting the hostnames? for my home lan of 3 pc's i edit their hosts file to define the host to ip mapping.
[17:52] <tucemiux> Monkey_Dust,  maybe it is possible but it's not something that you would ask for in a support channel, her machine is working just fine
[17:52] <Yadira> and i have done it before
[17:52] <Yadira> im sorry
[17:52] <Monkey_Dust> Yadira: if it is simple, why are you asking us?
[17:52] <philinux> AshWatson: Have you been into the bios
[17:52] <Yadira> probebly im asking for too much
[17:52] <SomeoneE1se> Dr_Willis: dhcp I'd assume
[17:52] <Oer> Yadira, thank you
[17:53] <randomman> cryptk: thank you my good man
[17:53] <Yadira> because this still the linux help
[17:53] <cryptk> Yadira: just copy and paste this 'dpkg -l | grep "^ii"'
[17:53] <AshWatson> yes i have been into the bios and set cd/dvd drive to be the first option
[17:53] <sacarlson> Yadira: it was two different lines one make a list to keep for when you wanted to restore,  the other line was after boot it installed all the stuf you had before.
[17:53] <cryptk> that will give you a list of all installed packages
[17:53] <Dr_Willis> SomeoneE1se:  I dont think DHCP does that..   at least its Never done it for me.. (guess it could be my routers dhcp server limitions)
[17:53] <tucemiux> Yadira, this is the "ubuntu suppport channel"
[17:53] <cryptk> randomman: no prob, you were making it way too hard
[17:53] <Yadira> i have ubuntu
[17:53] <calebwright> test
[17:53] <SomeoneE1se> it works most of the time and sometimes it "just doesn't" and I can never figure out what makes it work or not
[17:53] <Yadira> whats the porblem
[17:54] <danieldd> I have a small problem with Ubuntu. When I listen to Music on one program (for example, using the "Totem Media Player") and there is some other sound (For example, watching a video or getting a mail), there is a strange bass voice. Anyone know what might cause it?
[17:54] <philinux> AshWatson: unless you can test the viability of the livecd there's nothing else I can suggest
[17:54] <Yadira> i have a really answer from Monkey_Dust
[17:54] <Pici> Yadira: You have been given a number of suggestions, is there a problem that you're having running them or reading the output or what?
[17:54] <andersom_cruz> hello everybody... how are you?
[17:54] <AshWatson> could it be that im using an external cd drive to boot from it
[17:55] <Monkey_Dust> !hi| andersom_cruz
[17:55] <Yadira> the output i had before was a list a text list
[17:55] <Yadira> of installed softwares
[17:55] <Yadira> thats all i want
[17:55] <Shagnasty> SomeoneE1se: check you DNS entries
[17:55] <abhijit> can i copy from my standard sesstion to my ctrl alt f1 session?
[17:55] <philinux> AshWatson: yes maybe
[17:55] <Pici> Yadira: And whats wrong with the command that you were given?
[17:55] <SomeoneE1se> Shagnasty: great how
[17:55] <Yadira> they on terminal
[17:55] <AshWatson> well it wont boot from usb either,
[17:55] <Yadira> i did it with out terminal
[17:55] <Monkey_Dust> Yadira: try dpkg -l > software.txt
[17:55] <Yadira> im sorry guys
[17:55] <frxstrem> is there a way to reinstall programs with apt-get (like apt-get reinstall [programs])?
[17:56] <frxstrem> 'cause I think I broke some packages last time I upgraded...
[17:56] <Shagnasty> SomeoneE1se: I assume you are on a network?
[17:56] <Pici> frxstrem: apt-get install --reinstall packagename
[17:56] <SomeoneE1se> Shagnasty: yes
[17:56] <frxstrem> Pici: thanks :D
[17:56] <wildc4rd> evening all
[17:56] <n00b12> morning ;)
[17:56] <Yadira> No command 'try' found, did you mean:
[17:56] <Yadira>  Command 'tty' from package 'coreutils' (main)
[17:56] <Yadira>  Command 'tr' from package 'coreutils' (main)
[17:56] <Yadira>  Command 'trn' from package 'trn' (multiverse)
[17:56] <Yadira>  Command 'trn' from package 'trn4' (multiverse)
[17:56] <abhijit> night!
[17:56] <Yadira>  Command 'trs' from package 'konwert' (main)
[17:56] <FloodBot2> Yadira: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[17:56] <Monkey_Dust> Yadira: in Synaptic > File > save markings as
[17:56] <Yadira> ok i try that
[17:57] <Yadira> sound better for me
[17:57] <zolomon> Hello! I'm trying to start SWAT for Samba in my web browser by going to http://localhost:901 - it asks for credentials, username and password - which ones should I use?
[17:57] <sacarlson> over dose on too much info
[17:57] <Pici> Monkey_Dust: Thanks :)
[17:57] <Shagnasty> SomeoneE1se: try running nslookup from a terminal
[17:57] <sacarlson> it can happen to the best of us
[17:57] <Monkey_Dust> yw Pici
[17:57] <SomeoneE1se> I get a > prompt
[17:58] <Shagnasty> SomeoneE1se: type in google.com
[17:58] <Shagnasty> SomeoneE1se: It should list your dns server
[17:58] <abhijit> can i copy from my standard sesstion to my ctrl alt f1 session?
[17:58] <SomeoneE1se> Shagnasty: yes
[17:58] <Shagnasty> SomeoneE1se: type the name of the computer you are looking for
[17:59] <tucemiux> abhijit, you can use a temporary file
[17:59] <abhijit> tucemiux,  i am asking about copy paste
[17:59] <frxstrem> is there a program that would count the number of lines in a file or from the standard input?
[17:59] <SomeoneE1se> Shagnasty: server can't find boxen: NXDOMAIN
[17:59] <sacarlson> frxstrem: well openoffice will but there are many others
[17:59] <matthes__> hello. i have no sound at my system
[18:00] <zolomon> Anyone know what credentials I should use? I tried root and my own but they don't work. I fail when I try to create a new user with smbpasswd -a TestUser
[18:00] <AshWatson> ill just rin up acer
[18:00] <frxstrem> sacarlson: I meant a command line program
[18:00] <oCean_> frxstrem: wc
[18:00] <shsek> I'm getting "ALERT! /dev/mapper/foobar-root does not exists" error on boot (after messing up some stuff with initramfs-tools), but I can access my filesystem via the rescue mode of the Ubuntu Server CD. I think its because the LVM2 module isn't loaded properly. How do I tell initramfs to load this module?
[18:00] <frxstrem> oCean_: ok, thanks :)
[18:00] <Shagnasty> SomeoneE1se: ok, that means the box you are trying to get to is not registering with the DNS server on your network
[18:00] <oCean_> frxstrem: cat file | wc
[18:00] <matthes__> I already made a post here: http://ubuntuforums.org/showthread.php?t=1550797 but noone answered yet
[18:00] <tucemiux> abhijit, i just tried it so that means it's a no, at least on my box, but like i mentioned before, you could create the effect of copy and pasting by using a temporary file
[18:01] <abhijit> tucemiux, thanks for trying! :)
[18:03] <sacarlson> matthes__: good blog entry but sorry can't help you
[18:04] <matthes__> sacarlson: thanks :/
[18:04] <sacarlson> natthes__: oh maybe you should add a list of like lspci
[18:04] <owd95> i have a fuji siemeans computer with a via graphic card and ubuntu has no drivers so and cannot se movies and youtube... help
[18:05] <EdwardL> Gah. Now I've got problems in the fstab department. I've told it that I want to mount /dev/sdb7 /media/sdb7 auto rw,user,auto,exec,suid but I can't seem to change the files. What have I done wrong?
[18:05] <matthes__> sacarlson: you mean lscpu?
[18:05] <sacarlson> matthes__: no lspci give all the info on the cards you have installed in your system
[18:06] <matthes__> sacarlson: ok, thanks, I'll add it
[18:06] <zolomon> I installed ubuntu desktop edition but I never got to enter any password for root only for the account I created during the installation. What is my root password? :(
[18:06] <Bytesunfish> If someone has some networking experience, I have a wireless card that is not being recognized. The card is a PCE-N13. I have installed the latest drivers and the device shows up under "lspci" What should be my next step. I'm running the latest Ubuntu Desktop x64. My /etc/network/interfaces only shows the loopback interface. Wired network is functional. I have run "apt-get update" and "apt-get upgrade" today.
[18:06] <Kwpolska> Bytesunfish: /etc/network/interfaces SHALL be empty.
[18:07] <Kwpolska> did you tried to modprobe it or whatever?
[18:07] <randomman> cryptk: is there any way to extend my sed script (http://paste.ubuntu.com/477033/) so that it writes the mv command: like mv oldname.txt.base newname.txt?
[18:07] <abhijit> hello
[18:07] <Bytesunfish> I haven't yet. I'm not familiar with modprobe. I'm rather new to linux.
[18:07] <sacarlson> matthes__: with the info you get from the lspci  of your sound card you might want to use in google add ubuntu and see if others share the problem
[18:07] <abhijit> do i need to submit solution to my brainstorm idea?
[18:07] <abhijit> :-o
[18:07] <adi_> hi all. can anyone send me via mail the graphic driver "sis_drv.so" that any k/ubuntu user have on its file system /usr/lib/xorg/modules/drivers
[18:07] <Kwpolska> Bytesunfish: I don't see your card in the listing.
[18:08] <Oer> owd95 http://linux.via.com.tw/support/downloadFiles.action ? ( and select ubuntu 10.04 first ! )
[18:08] <adi_> every ubuntu have it in this path: /usr/lib/xorg/modules/drivers
[18:08] <econdudeawesome> zolomon: It will be your password. Root is disabled by default in Ubuntu
[18:08] <Bytesunfish> Which listing are you refferring to?
[18:08] <zolomon> econdudeawesome: thanks!
[18:08] <adi_> the driver i need is called "sis_drv.so"
[18:08] <Kwpolska> Bytesunfish: http://wiki.debian.org/WiFi this one, it's helpful, but do not add any repositories from there.
[18:08] <endo_pontang> halo brow
[18:08] <econdudeawesome> zolomon: when you type in "sudo", use the password for your account
[18:08] <endo_pontang> halo brow, lagi
[18:08] <adi_> can anyone help me please
[18:08] <cryptk> randomman: read up on the find command and it's -exec option
[18:08] <SomeoneE1se> Shagnasty: my problem was/is my router allowing local computes to keep IP's past the DHCP expire time, suggestions?
[18:09] <endo_pontang> jancok
[18:09] <econdudeawesome> zolomon: it will the be the administrator password you created when you first installed it
[18:09] <owd95> 0er: i will try it! thx man
[18:09] <Kwpolska> randomman: maaan, just add mv file.txt.svn-base file.txt and [solved]
[18:09] <randomman> cryptk: I did, I couldn't get it to work because i tried subshell and the {} didn't expand
[18:09] <Archdave> http://ubuntuforums.org/showthread.php?t=1492062&highlight=ThinkPad+T60+audio  Ubuntu forums Thinkpad T60 sound problems
[18:09] <Pici> adi_: You can get that yourself by installing the xserver-xorg-video-sis package.
[18:09] <Kwpolska> Archdave: who cares
[18:10] <Archdave> someone who posted up there ^^^^
[18:10] <adi_> really?
[18:10] <zolomon> econdudeawesome: thanks!
[18:10] <Bytesunfish> You are quite correct that it does not display on that list. It does however have a "Linux Support" icon on the packaging of the product. I know others have gotten it to work. I tried a netgear card before this with similar problems. I suspect something is wonky with my setup.
[18:10] <adi_> i will try
[18:10] <abhijit> !who | adi_
[18:10] <randomman> Kwpolska: I want this to operate on a list of files, so i don't know ahead of time the filename, just that it has .svn-base as suffix
[18:10] <sacarlson> SomeoneE1se:  I'm not sure that's a problem.  you want to pop them off your network at some point?
[18:10] <Monkey_Dust> the guy with the sed question => this pdf shows how to change text to blanks http://dl.dropbox.com/u/4653463/issue21-eng.pdf
[18:10] <bindi> hai guis. anyone here has got i3 530 (or any other clarkdale) to work with ubuntu? i cant boot to ubuntu without using "nomodeset" in the boot parameters w/e. and then i get an error box saying "Failed to detect GEM. Kernel 2.6.28 required". It's a 64bit 10.04
[18:11] <Kwpolska> randomman: use a while loop and it's done
[18:11] <Kwpolska> Monkey_Dust: he found a solution and he is randomman
[18:11] <bindi> after that box i can log in with "low graphics mode"
[18:11] <randomman> Kwpolska: you're not understanding the problem.
[18:11] <Testien> I have two hard drives, and I actively use only one, so I decided to remove the other one from the box, but apparently GRUB was stored on it, and every time I boot, the computers ends at a black screen. I am now running from an ubuntu live cd, how to recover/recreate the grub?
[18:11] <sacarlson> SomeoneE1se:  what would stop them from just going with a static address?
[18:11] <BluesKaj> sweet, looks like your monitor resolution settings can't be displayed
[18:11] <Pici> randomman: er, do you mean like: rename s/\.svn-base// *.svn-base
[18:12] <Saevar> Testien, grub-install /dev/<disk>
[18:12] <Kwpolska> randomman: I am not, bacause the way you're trying to do ha no sense
[18:12] <Pici> randomman: That would remove .svn-base from all files that have that extension.
[18:12] <artin1> Does anyone know if the installation process, is the same in Lubuntu as in Ubuntu? The Lubuntu channel is kind of dead. Especially I need the "install next to windows" function and the automated partitioning
[18:12] <adi_> pici : this is what i get: The following packages have unmet dependencies:
[18:12] <adi_>   xserver-xorg-video-sis: Depends: xserver-xorg-core (>= 2:1.6.99.900) but 2:1.6.4-2ubuntu4.3 is to be installed
[18:12] <adi_> E: Broken packages
[18:12] <sweet> BluesKaj: yep. Wiesshund helped me understand the issue
[18:12] <adi_> pici : any idea?
[18:12] <SomeoneE1se> sacarlson: lazyness
[18:12] <sacarlson> artin1:  I think so like a live boot cd
[18:12] <Monkey_Dust> randomman: http://dl.dropbox.com/u/4653463/issue21-eng.pdf, page 6
[18:12] <Bytesunfish> I'm not sure if this makes a difference. This is a PCIE card rather than a pci card.
[18:13] <artin1> sacarlson: thnak you
[18:13] <bindi> if anyone is interested in my problem, heres Xorg.0.log http://pastebin.com/wYBa5C76 and heres dmesg http://pastebin.com/yfBmdWwc
[18:13] <SomeoneE1se> sacarlson: a have a few laptops that visit other networks they need to use dhcp for them
[18:13] <sacarlson> SomeoneE1se: what does it make you do reset your adsl modem?
[18:14] <Pici> adi_: What version of Ubuntu are you using?
[18:14] <sacarlson> SomeoneE1se: so you run out of ip address?
[18:14] <BluesKaj> sweet, ok good ....was bit behind on that one :)
[18:14] <Saevar> bindi, this line: No screen section available. Using defaults. says you have bad config :P
[18:14] <adi_> pici : 9.10
[18:14] <bindi> Saevar: uhm
[18:14] <Saevar> bindi, give the screens section to /etc/X/xorg.conf
[18:15] <sacarlson> SomeoneE1se: well there is a setting I can show you if that's what you need
[18:15] <bindi> theres no xorg.conf in /etc/X11 :)
[18:15] <bindi> just a xorg.conf.failsafe
[18:15] <Saevar> bindi...damn xorg 3 changes...wait  a sec
[18:16] <frxstrem> is there some sort of command line utility that would allow me to extract the word between the second and third whitespace on each line from standard input?
[18:16] <Pringle> Hey all, I've just installed ubuntu 10.04 x86 on a Fujitsu Amilo L7320gw. I'm finding the screen is cut off on the right, any suggestions please? :)
[18:16] <Pringle> changing the resolution causes it to go crazy and unviewable
[18:16] <bindi> Saevar: sure that would cause a terminal .. uh.. mode I guess?
[18:16] <EdwardL> Hello. I've got problems in the fstab department. I've told it that I want to mount /dev/sdb7  /media/sdb7 | auto | rw,user,auto,exec,suid  0 0 but I can't seem to change the files. Not even chmod. What have I done wrong?
[18:16] <Pringle> even changing it to 1024x768 or something
[18:17] <Saevar> bindi, ? what do u mean ?
[18:17] <sacarlson> SomeoneE1se: add this to /etc/dhcp3/dhcp3.conf  file max-lease-time 600;  600 is in seconds
[18:17] <adi_> i am on 900X600
[18:17] <bindi> Saevar: without "nomodeset" it will pop up console
[18:17] <Pici> adi_: Can you please pastebin the contents of /etc/apt/sources.list ?
[18:17] <bindi> with all that messages like in dmesg
[18:17] <bindi> and there it stays untill i restart :p
[18:17] <cryptk> randomman: check out this link http://6v8.gamboni.org/Mass-renaming-with-linux-shell.html
[18:17] <bindi> well its not "console" really, i cant type anything
[18:17] <randomman> Pici: yes, you understood my question and that works. out of curiosity could it be done in sed?
[18:17] <BluesKaj> bindi, one can generate an Xorg.conf : http://ubuntulinux.co.in/blog/ubuntu/ubuntu-9-10/xorg-conf-file-create-on-ubuntu-9-10/
[18:17] <Yadira> if anyone knows hot to run liggtscribe please pm me
[18:18] <bindi> BluesKaj: this applies to 10.04 too?
[18:18] <adi_> pici: where do you paste bin here?
[18:18] <Monkey_Dust> Yadira: is back :)
[18:18] <Pici> adi_: http://paste.ubuntu.com
[18:18] <BluesKaj> bindi,yup
[18:18] <Pici> randomman: sed doesn't know anything about filenames, you would need a multi-line bash script to use sed to do that.
[18:18] <VCoolio> frxstrem: use sed; I can't give you the exact command you need, but check here  http://sed.sourceforge.net/sed1line.txt
[18:19] <cryptk> randomman: that link I posted shows how to mass rename files in one line
[18:19] <frxstrem> VCoolio: okay (I tried that, though, didn't work that well)
[18:19] <Saevar> bindi, fb konsole or normal ?
[18:19] <cryptk> you could modify it some if you needed to move them to a new location as well
[18:19] <karlo> does ubuntu have default alarm installed ?
[18:19] <bindi> Saevar: i dont know lol
[18:19] <bindi> Fatal server error:
[18:19] <bindi> Server is already active for display 0
[18:20] <EdwardL> Hello. I've got problems in the fstab department. I've told it that I want to mount /dev/sdb7  /media/sdb7 | auto | rw,user,auto,exec,suid  0 0 but I can't seem to change the files. Not even chmod. What have I done wrong?
[18:20] <Saevar> bindi, alt+f7
[18:20] <Saevar> bindi, come private
[18:20] <saby> EdwardL,
[18:20] <danieldd> For the third time, I have a small problem with Ubuntu. When I listen to Music on one program (for example, using the "Totem Media Player") and there is some other sound (For example, watching a video or getting a mail), there is a strange bass voice. Anyone know what might cause it?
[18:20] <VCoolio> frxstrem: or maybe awk, something like awk '{print $2}'  for each line
[18:20] <adi_> pici : http://paste.ubuntu.com/477040/
[18:20] <LuciusMare> Apparetly, it got grub on the disk, but it falls to a shell, boot says "no loaded kernel" and "root" says my / is ext2 :/
[18:20] <EdwardL> Yes, saby?
[18:20] <saby> EdwardL, is the partition you are mounting NTFS ?
[18:21] <sacarlson> EdwardL: are you super user try sudo vi yourfile
[18:21] <EdwardL> saby no, it is FAT32.
[18:21] <EdwardL> sacarlson: I'm just myself in the file browser trying to rename.
[18:21] <sacarlson> EdwardL: is it mounted read only?
[18:21] <frxstrem> VCoolio: ok, thanks
[18:21] <Pici> adi_: Please run: sudo apt-get update, and then try to install that package again.
[18:22] <sacarlson> EdwardL: well do you have admin privliges?
[18:22] <adi_> pici: i am on a 2005 desktop with a old crt monitor. cpu celeron d 2.66 480mb ram and i am trying to get higher resolution for my sis graphic card
[18:22] <adi_> but its imposible
[18:22] <frxstrem> VCoolio: (it worked :D)
[18:22] <aquifex> i have a desktop from 2003
[18:22] <EdwardL> sacarlson: It is mounted as  rw,user,auto,exec,suid  and I have sudo privlages (that is how I'm able to edit the fstab).
[18:22] <aquifex>  and it works with everything
[18:22] <saby> EdwardL, please write like this                "dev/sdb7 	/media/sdb7 	fat32 	rw,auto,user,uid=jasneet 0 0"
[18:23] <EdwardL> saby: will try.
[18:23] <randomman> cryptk: that is what I am trying to do, but it doesn't work. that script looks almost exactly like mine, which is why I'm confused as to why it isn't working
[18:23] <LuciusMare> oh, sawwy, wrong channel :)
[18:23] <saby> EdwardL, some times auto doesnt work
[18:23] <Pringle> k love u all, bi bi xxx
[18:23] <adi_> pici: after sudo apt-get update i get the same thing
[18:23] <shsek> Anyone? please? :O my development server is pretty much dead, I can really use some help
[18:23] <sacarlson> EdwardL:  so you can edit /etc/fstab what's the problem?
[18:23] <adi_> package broken
[18:24] <llutz>  saby fs type is "vfat" not fta32
[18:24] <saby> sacarlson, he cant edit the files in the drive i think
[18:24] <llutz> fat32*
[18:24] <saby> llutz, so instead of fat32 i have to write vfat ?
[18:24] <adi_> pici: are you on a k/ubuntu?
[18:24] <llutz> saby yes
[18:24] <saby> EdwardL, please write like this                "dev/sdb7 	/media/sdb7 	vfat 	rw,auto,user,uid=jasneet 0 0"
[18:24] <EdwardL> sacarlson: Can't edit the files on the mounted partisions. Hang on, writing what, wait... llutz, ok, vfat then.
[18:25] <sacarlson> saby: he had admin priv and the drive is mounted read write so he should be able to do it
[18:25] <saby> EdwardL, please change the uid to your name
[18:25] <Pici> adi_: Yes.
[18:25] <saby> sacarlson, when i had set the fs to auto it did give some problems
[18:25] <Kwpolska> can someone help me doing randomness with sed?
[18:25] <adi_> if yes please check if you have the "sis_drv.so" at this location /usr/lib/xorg/modules/drivers
[18:26] <Pici> adi_: No, because this is a server.
[18:26] <adi_> ahhh ok :)
[18:26] <sam898889> hey ~ for some reason my  panels keep vanishing. does anyone know why ?  (they are not on autohide)  how can i get them back ??????
[18:26] <Pici> adi_: It seems like your packages are in the bad state, as those package versions you're listing are in Karmic, but you're running Lucid according to your sources.list file.  When was the last time you did a package update/upgrade?
[18:26] <sacarlson> saby: oh it's not that he can't change /etc/fstab he can't right to the monted vfat.  sorry I'm slow tonight
[18:27] <adi_> pici: actually i started a upgrade from karmic to lucid.
[18:27] <EdwardL> saby: WEE! Thanks alot.
[18:27] <saby> sacarlson, ya he cant write to the mounted partition.
[18:27] <saby> EdwardL, does it work now ?
[18:27] <Pici> adi_: but?
[18:27] <adi_> pici : but than the whole thing crashed
[18:27] <Testien> Nope, still falls to a black screen :( Thank you anyway, it seems that the problem isn't in grub
[18:27] <adi_> pici so i quit
[18:27] <Pici> adi_: Well you're in an inconsistant state now, thats why you can't install that package.
[18:28] <EdwardL> saby: I right clicked and saw I could Rename, Delete, and Move a file. Now testing an app...
[18:28] <sam898889> for some reason my  panels keep vanishing. does anyone know why ?  (they are not on autohide)  how can i get them back ??????
[18:28] <adi_> pici: should i restart an upgrade?
[18:28] <EdwardL> Yes, that works too! :D
[18:28] <Phonex01> http://www.youtube.com/watch?v=JQXh20OuhIc&feature=related
[18:28] <saby> ya do some testing EdwardL
[18:28] <MadRobot> Hi all.
[18:28] <saby> good
[18:28] <sacarlson> saby: ya it's probly fat32 or other
[18:28] <Pici> adi_: Yes.
[18:28] <MadRobot> How do I downgrade my LibSD:
[18:28] <MadRobot> LibSDL
[18:28] <Phonex01> http://www.youtube.com/watch?v=JQXh20OuhIc&feature=related
[18:28] <EdwardL> saby: All works. Thanks. Thought auto meant it was smart in detecting what I wanted. :S
[18:28] <adi_> pici i started it
[18:28] <saby> sacarlson, apparently setting the fs to auto in the fstab file does create some problems, better to explicitly define it
[18:29] <saby> EdwardL, it is smart but some times it gets confused :P
[18:29] <Oer> please don't spam Phonex01  thank you
[18:29] <Phonex01> i'm not spaming
[18:29] <sacarlson> saby: I thought auto meant only mount when access needed.
[18:29] <Phonex01> i just share a video
[18:29] <Phonex01> thats all
[18:30] <adi_> anyone had resolved grahic resolution with sis661fx cards?
[18:30] <tuxifier> does anyone of you know a nice version control tool for digital images? I am aware of svn, bazaar, cvs already
[18:30] <adi_> i mean higher than 900X600
[18:30] <xiaoshou> hello
[18:31] <jiechic> hello
[18:31] <jiechic> 小兽
[18:31] <saby> sacarlson, i thought auto meant that it should identify the fs :S
[18:31] <xiaoshou> i see you,jiechic
[18:31] <jiechic> 呵呵。。。。
[18:32] <sacarlson> saby: maby we are both wrong and both bad spellers
[18:32] <ingenius> Hi, I was looking in /etc/network/interface but How to configure an static IP always up with or without cable connected ..
[18:33] <sacarlson> ingenius: I don't know I gave this to someone today and they didn't think it worked but I can give you a script or a sample of the file
[18:33] <shsek> I'm getting "ALERT! /dev/mapper/foobar-root does not exists" error on boot (after messing up some stuff with initramfs-tools), but I can access my filesystem via the rescue mode of the Ubuntu Server CD. I think its because initramfs doesn't load the LVM2 module properly. How do I tell initramfs to load this module?
[18:33] <saby> sacarlson hahaha may be i am wrong cos i am a noob and dont have much knowledge :P
[18:34] <ingenius> sacarlson: Ok thanks anyway
[18:34] <saby> sacarlson, how can i find what bluetooth adapter do i have and where can i find the drivers ?
[18:34] <vatzec> Hey, Ubuntu folk! Does anybody know of a piece of software that would allow me to insert subtitles into a movie file?
[18:35] <shsek> My developmeny machine is pretty much dead, I could really use some help
[18:35] <guest> No
[18:35] <vatzec> (Make them a part of the video instead of having them in a separate file)
[18:36] <alvarezp> Hello!
[18:36] <AshWatson> philinux, i got it wokring ive booted up in ubuntu livecd
[18:36] <AshWatson> now what ?
[18:36] <AshWatson> i have try ubuntu or install ubuntu
[18:36] <alvarezp> Anyone had problems with their numeric keypad lately on Ubuntu Lucid
[18:36] <alvarezp> ?
[18:36] <abhijit> alvarezp, yes. me
[18:36] <AshWatson> philinux?
[18:36] <sacarlson> ingenius: this is how I setup static ip address in interfaces http://paste.ubuntu.com/477049/
[18:36] <trollboy> anyone got a one-liner to fix \n\r windows->linux compatibilities?
[18:36] <noo> Hello I have a usb wlan stick and I wanted to insall the appropriate driver and therefore I followed http://ubunturt2870.pbworks.com/FrontPage This is the driver I should use and during the installation nothing goes wrong, but still I don't have wlan in the end. I played around before to make it work with ndiswrapper maybe I messed something up? Can anybody please help me? I try to make the belkin F6D4050v1 Usb wlan stick work and therefore t
[18:36] <noo> he ra2870. I don't know how to contiue and I really need this wlan urgently
[18:37] <alvarezp> abhijit, since yesterday, my numeric keypad does not work. NumLock on or off doesn't matter. Instead, it does something different.
[18:37] <philinux> AshWatson: how did you get it going
[18:37] <saby> vaztec try Gnome Subtitles
[18:37] <saby> how can i find what bluetooth adapter  i have and where can i find the drivers ?
[18:37] <alvarezp> In gnome-terminal it behaves like selecting some text until I click with the mouse.
[18:38] <llutz> saby: lsusb
[18:38] <Tomwa> Anyone here able to help me with finding some replacement programs for my normals windows ones?
[18:38] <alvarezp> abhijit, that happens if I press numpad "0"
[18:38] <aaronyy> trollboy: dos2unix should work
[18:38] <saby> ok
[18:38] <AshWatson> philinux, plugged it in wrong
[18:38] <abhijit> alvarezp, same with me. but little different . i need to pres num lock 2 times to make it alive
[18:38] <dri245> good day
[18:38] <AshWatson> philinux, theres 2 usb and i plugged the wrong one in
[18:39] <AshWatson> so ive booted up from the livecd, now what ?
[18:39] <philinux> AshWatson: ah, so is it booting normally now
[18:39] <AshWatson> it says
[18:39] <saby> llutz, so is this my adapter "Bus 002 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
[18:39] <saby> "
[18:39] <Teapot> Hey guys, I need some help installing Ubuntu Netbook Edition. Startup Disk Creator isn't allowing me to use the ISO.
[18:39] <AshWatson> install ubuntu or try ubuntu < philinux
[18:39] <philinux> you want try
[18:39] <alvarezp> abhijit, do you know where to change accessibility options? Maybe that's where.
[18:39] <Teapot> The wiki doesn't appear to have any instructions for handling this...
[18:39] <AshWatson> ok
[18:39] <AshWatson> 1 sec
[18:39] <trollboy> thanks aaronyy trying it there
[18:40] <VCoolio> Tomwa: http://ubuntuguide.org/wiki/Alternatives
[18:40] <abhijit> alvarezp, in system>preferences?
[18:40] <trollboy> btw, if anyone knows.. where would I find utf-16 in use?
[18:40] <llutz> saby: never seen that, but bcm2046 seems to be your bt-device
[18:40] <noo> isn't there anybody who can help me??
[18:40] <trollboy> I'm assuming its more common in eastern europe?
[18:40] <llutz> saby: "hcitool dev"
[18:40] <saravan> abhijit, audio s not wrkin in vlc
[18:40] <saby> llutz, ok :)
[18:40] <Teapot> Hey guys, I need some help installing Ubuntu Netbook Edition. Startup Disk Creator isn't allowing me to use the ISO.
[18:40] <AshWatson> philinux. on im on unbuntu
[18:41] <trollboy> ah...
[18:41] <Monkey_Dust> Teapot: try unetbootin
[18:41] <trollboy> its default on windows now..cute
[18:41] <Saevar> saravan, what ? i'm playing shakira waka waka flac in vlc right now
[18:41] <xangua> Teapot: then try !unetbootin
[18:41] <philinux> AshWatson: you need to follow this at section #16 http://ubuntuforums.org/showthread.php?t=1195275
[18:41] <Wiesshund> Teapot use unetbootin
[18:41] <abhijit> saravan, not to me. ask to channel
[18:41] <AshWatson> ok
[18:41] <philinux> AshWatson: I gotta go so hopefully someone else will help you. Lots of eyes in here. Good luck.
[18:41] <saby> llutz, hcitool dev returns only "Devices: "
[18:42] <Teapot> Monkey_Dust: xangua: Wiesshund: Thanks :)
[18:42] <saravan> saevar, videos s working but audio s not workin
[18:42] <Saevar> saravan: sudo aptitude instal vlc-plugin-pulse
[18:42] <llutz> saby: sudo modprobe btusb
[18:43] <saby> llutz, nothing
[18:43] <llutz> saby: "hcitool dev"
[18:43] <Wiesshund> noo what was your question?
[18:43] <saravan> saevar, This aptitude does not have Super Cow Powers
[18:44] <saravan> saevar, is the error
[18:44] <saby> llutz, still returning only "Devices: "
[18:44] <AshWatson> phili
[18:44] <Saevar> saravan, ~/instal/install/
[18:45] <sacarlson> saravan: super cow powers I like that
[18:45] <llutz> saby: "lsmod |grep hci_usb"
[18:45] <saravan> saevar , what is the tahat
[18:45] <Saevar> saravan...grm
[18:45] <Saevar> saravan: sudo aptitude install vlc-plugin-pulse
[18:45] <saravan> saevar, what
[18:45] <Saevar> saravan: it says overrite instal with install
[18:46] <Saevar> saravan, mistype...i have wrote one l
[18:46] <saby> llutz, nothing
[18:46] <Saevar> saravan, regular expression was that ;P
[18:46] <llutz> saby: sudo modprobe hci_usb
[18:46] <saby> llutz, "FATAL: Module hci_usb not found"
[18:46] <danieldd> Someone, I'd really be glad if I could get some help.... >	I have a small problem with Ubuntu. When I listen to Music on one program (for example, using the "Totem Media Player", or "RythmBox") and there is some other sound (For example, watching a video or getting a mail), there is a strange bass voice. Anyone know what might cause it?
[18:46] <saravan> saevar , it is already installed dude
[18:47] <Saevar> saravan, have you tried restart pulse ?
[18:47] <llutz> saby: according to some google-results, hci_usb seems to be the driver for that device. you have to grab it somewhere
[18:48] <saravan> saevar , what is the im new to linux dude
[18:48] <saby> llutz, alright will google it
[18:48] <sacarlson> saravan:  I found it apt-get moo
[18:48] <Saevar> saravan, next time you'll say dude, i'll insert you into my ignore list
[18:48] <ramvi> How will I go about downloading all the Ubuntu source packages? I want it all on a HD
[18:48] <Saevar> saravan, if u want something, be nice
[18:49] <xangua> ramvi: download ubuntu dvd¿
[18:49] <xangua> or maybe !aptoncd ¿¿
[18:49] <saravan> saevar, sorry
[18:49] <ramvi> xangua: source dvd?
[18:50] <njin> you think that will be problem uninstalling and reinstalling gnome-control-center, is safe to do it ?
[18:50] <n0wje> has anyone noticed a lag with xchat-gnome in 10.04?
[18:50] <Saevar> saravan, smoke time...5 minutes
[18:50] <Mjuksel> lol hij doet t nog steeds
[18:50] <Mjuksel> :s
[18:50] <Mjuksel> www.mjuksel.nl
[18:50] <Monkey_Dust> !ot| n0
[18:50] <FloodBot2> Mjuksel: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[18:50] <Saevar> n0wje, not me
[18:51] <sacarlson> saevar: I already got my buz on
[18:51] <Wiesshund> n0wje if i run xchat beside other irc clients, yea it lags behind the otheres but nothing terrible
[18:51] <alvarezp> abhijit, duurh, you're right. I was looking for it under another name.
[18:51] <n0wje> hmm, it seems to happen with channel list
[18:51] <Monkey_Dust> Mjuksel: wrong window
[18:51] <alvarezp> abhijit, for some reason, "control pointer with keypad" was active. That fixed it.
[18:51] <alvarezp> Is it the same with you?
[18:52] <Wiesshund> n0wje well asking for a complete channel list will usualy lag anything hehe
[18:52] <danieldd> Saevar / philinux, Excuse me, You seem to not be as new here as I do. Do you mind telling me if I'm doing something wrong with my help request? Did I forget to add some detail or something like that?
[18:52] <n0wje> I'll try another client.
[18:52] <njin>  do you think that there will be problem uninstalling and reinstalling gnome-control-center, is safe to do it ?
[18:52] <abhijit>  alvarezp wiat let me try
[18:52] <noo> wiesshund: well my question is how to continue. I did what was written in the manual and I don't get any errors and still it doesn't work for me. Maybe I can post some helpful system output so you can help me
[18:52] <saravan> saevar, carry on
[18:52] <slipttees> hi all
[18:52] <Wiesshund> noo i dont know what your initial question was
[18:52] <abhijit> alvarezp, yes control pointr using key is disable here.
[18:53] <shsek> Hey, I'm getting "ALERT! /dev/mapper/foobar-root does not exists" error on boot (after messing up some stuff with initramfs-tools), but I can access my filesystem via the rescue mode of the Ubuntu Server CD. I think its because initramfs doesn't load the LVM2 module properly. How do I tell initramfs to load this module?
[18:53] <alvarezp> oh ok.
[18:53] <alvarezp> abhijit, thanks
[18:53] <n0wje> yes that's true but it happens with search after it downloads list. thanks for the info.
[18:53] <slipttees> i can change file system (converter) ext4 to ext3?
[18:53] <abhijit> alvarezp, what thanks? my problem ddnt solved yet? :-o
[18:53] <abhijit> alvarezp, :P :)
[18:53] <noo> wiesshund: Hello I have a usb wlan stick and I wanted to insall the appropriate driver and therefore I followed http://ubunturt2870.pbworks.com/FrontPage This is the driver I should use and during the installation nothing goes wrong, but still I don't have wlan in the end. I played around before to make it work with ndiswrapper maybe I messed something up? Can anybody please help me? I try to make the belkin F6D4050v1 Usb wlan stick work and
[18:53] <noo> therefore the ra2870. I don't know how to contiue and I really need this wlan urgently
[18:53] <slipttees> without lost file
[18:53] <slipttees> ?
[18:54] <AshWatson> can someoen help me with sudo fdisk -l
[18:54] <slipttees> my /home is ext4 i need change to ext3 without lost any file. i can do this?
[18:54] <AshWatson> how can i identify which is the windows device
[18:54] <Monkey_Dust> AshWatson: shoot
[18:54] <AshWatson> what monky?
[18:54] <shsek> slipttees, AFAIK mkfs.ext3 /dev/... should do that, but I'm not 100% sure
[18:54] <alvarezp> abhijit, thanks to you for helping. -- I don't what is causing yours, though. What is the behavior you are seeing?
[18:55] <Monkey_Dust> AshWatson: see what the format is, FAT or NTFS
[18:55] <llutz> slipttees: don't use mkfs!
[18:55] <slipttees> shsek: lost my files?
[18:55] <Wiesshund> noo is that wifi adapter on lucids hardware compatibility list?
[18:55] <AshWatson> i have 3
[18:55] <abhijit> alvarezp, its ok. I wll solve it later. i was just joking! :)
[18:55] <llutz> slipttees: iirc there is no way back from ext4 to ext3
[18:55] <AshWatson> one is unkown and the other 2 are - HPFS/NTFS
[18:55] <alvarezp> pfffffft, lol
[18:55] <Monkey_Dust> NTFS = Window$
[18:55] <AshWatson> hmm
[18:55] <slipttees> llutz: impossible?
[18:56] <AshWatson> 2 of them are HPFS/NTFS
[18:56] <shsek> come on, I could really use some help... anybody?
[18:56] <AshWatson> is the one with windows the one that has a * for boot
[18:56] <Monkey_Dust> shsek: what is your question?
[18:56] <noo> wiesshund: I don't understand you're question
[18:56] <llutz> slipttees: afaik yes, backup your files, create new ext3
[18:56] <shsek> Monkey_Dust, <shsek> Hey, I'm getting "ALERT! /dev/mapper/foobar-root does not exists" error on boot (after messing up some stuff with initramfs-tools), but I can access my filesystem via the rescue mode of the Ubuntu Server CD. I think its because initramfs doesn't load the LVM2 module properly. How do I tell initramfs to load this module?
[18:56] <AshWatson> Monkey_Dust, can i pm you ?
[18:56] <slipttees> llutz: hum...go back /home on my system?
[18:56] <ItsMeMario> hello guys, when i try execute a directfb application i get a /dev/fb0 device not found on my virtualbox ubuntu installation. Wich is the framebuffer device in this case?
[18:57] <slipttees> this is my /home
[18:57] <Wiesshund> !hcl
[18:57] <slipttees> :-)
[18:58] <d09e4td06> hello room
[18:58] <ItsMeMario> guys, when i try execute a directfb application i get a /dev/fb0 device not found on my virtualbox ubuntu installation. Wich is the framebuffer device in this case?
[18:58] <shsek> Monkey_Dust, I was stupid enough to remoev initrmafs, which caused lots of issues, but someone here fixed most of them - I'm think right now its just a problem with LVM2 module not getting loaded
[18:59] <d09e4td06> just upgraded my esprimo from karmic to lucid.
[18:59] <d09e4td06> but got some problem here with google earth
[18:59] <d09e4td06> anyone can help??
[19:00] <lantnegard> hi
[19:00] <Monkey_Dust> !ot| d09e4td06
[19:00] <lantnegard> hello
[19:00] <sacarlson> d09e4td06: google earth works for me
[19:00] <lantnegard> hi
[19:00] <jiechic> hi
[19:00] <lantnegard> =(
[19:00] <Pici> Monkey_Dust: Why is that offtopic?
[19:00] <lantnegard> hi
[19:00] <lantnegard> y need
[19:00] <lantnegard> help
[19:00] <FloodBot2> lantnegard: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[19:01] <shsek> Monkey_Dust, any ideas? :O
[19:01] <jj_> hi there can somone tell me how i would install myt linuxserver.iso file onto virt machine
[19:01] <jj_> ?
[19:01] <Monkey_Dust> Pici: google earth seemed ot to me :)
[19:01] <lantnegard> am somebody speach espanish
[19:01] <Pici> !es | lantnegard
[19:01] <sacarlson> d09e4td06:  I didn't upgrade I just fresh install lucid
[19:01] <shsek> my SVN, Trac and pretty much my entire development enviroment, for me and 5 other developers, is down. This is what I do for living, so I really need to get this back up
[19:01] <n0wje> ok it was Xchat-gnome front end that was causing the delay installed xhat and it works great...
[19:01] <shsek> I would really appreciate any help
[19:02] <Pici> Monkey_Dust: I'd say it Ubuntu support related enough for this channel.
[19:02] <Wiesshund> n0wje very good.
[19:02] <jj_> ?
[19:02] <jj_> hi there can somone tell me how i would install myt linuxserver.iso file onto virt machine
[19:02] <jj_> ?
[19:03] <aSt3raL> hi i cant get ubuntu working on my netbook
[19:03] <abhijit> jj_, in virtual machine under cd drom select that iso image
[19:03] <abhijit> !details | aSt3raL
[19:03] <aSt3raL> im using windows7 and trying to get ubuntu to work in oracle vm
[19:04] <aSt3raL> when i start up the vm it dumps me to a command line
[19:04] <aSt3raL> ubuntu 10.4 netbook build
[19:04] <alvarezp> aSt3raL, what is the prompt on that command line?
[19:04] <sacarlson> jj_:  ya that's what I like about virtualbox  you can install use an iso file to emulate a cd
[19:05] <jj_> abhijit, thanks mate
[19:05] <jj_> worked brilliant
[19:05] <aSt3raL> oh i dont know i could restart it and look if thatd help
[19:05] <danieldd> Hello. I'm running Ubuntu 10.04. When I try to play music from 2 sources at the same time (Listen to music while getting a new email), there is a sudden bass sound.
[19:05] <aSt3raL> i tried to restart gdm
[19:05] <rainrain> does anyone know how to change the font size in evolutions' sidebar where it lists the folder list
[19:06] <aSt3raL> reseting the vm one sec
[19:07] <aSt3raL> it says errors were found checking /
[19:07] <danieldd> abhijit?
[19:07] <aSt3raL> filesystem has errors
[19:07] <Matthes_> I don't have any sound on my system. report here: http://ubuntuforums.org/showthread.php?t=1550797
[19:07] <abhijit> danieldd, yes?
[19:07] <aSt3raL> run fsck manually
[19:07] <Tomwa> Anyone here able to answer a very quick question about the different desktop environments?
[19:08] <abhijit> !ask | Tomwa
[19:08] <aSt3raL> mountall: filesystem has errors
[19:08] <Wiesshund> Tomwa just ask it, best way to find out
[19:08] <danieldd> I'd be glad to have some advice. I'm trying to ask my question for over 5 times and no response. Do you mind pointing out what am I doing wrong?
[19:08] <tripelb-webchat> I'm on a 10.04 livecd. Checked twice for integrity. programs quit: gparted, ff keeps quitting on certain sites (ubuntu help pages eg). This does not happen with 9.04
[19:08] <Tomwa> Right sorry I'm not used to that lol this is the first irc that's ever had me do that :)
[19:09] <abhijit> danieldd, and what makes you think I will have the answer? I will try but I cant promise.
[19:09] <aSt3raL> im just trying to setup my netbook so i can use x windows from w7
[19:09] <aSt3raL> is a vm the wrong idea?
[19:10] <Wiesshund> aSt3raL do you need to run win and ubuntu at same time?
[19:10] <danieldd> I'm new here so I wondered whether I miss some detail or asking the wrong way
[19:10] <Tomwa> Is there any downside to having multiple desktop environments at once? (Apart from the clutter), Also is there a way to hide the apps of other DE's while in another one?
[19:10] <abhijit> !details | danieldd just ask your questin to channel
[19:10] <aSt3raL> Wiesshund, yeah i use w7 for university work and ubuntu for research
[19:10] <AshWatson> Monkey_Dust ??
[19:10] <aSt3raL> the astronomy dept here has all linux machines
[19:10] <AshWatson> you around ?
[19:11] <danieldd> Hello. I'm running Ubuntu 10.04. When I try to play music from 2 sources at the same time (Listen to music while getting a new email), there is a sudden bass sound.
[19:11] <tripelb-webchat> I wanted to instal 10.04. I want my new,big HD to have partitions. I partitioned it with gparted. I opened install a couple of times just to look and not understand.  Now gparted "unexpectedly quits". FF keeps quitting too. None of this has happened on a HD install of 9.10 or on the 9.04 liveCd. Help!!
[19:11] <melymario> mozna tu pogadac po polsku
[19:11] <abhijit> !sound | danieldd
[19:11] <abhijit> !pl | melymario
[19:11] <Wiesshund> tomaw you wont actualy have the DE's at the same time. like you wouldnt be running KDE and GNOME at the same time
[19:11] <bamrejjeej> Do you know how to be connected to several #channels when using irssi (an IRC cli program) and how to switch between them (as well as between queries to users)?
[19:11] <melymario> dzieki
[19:12] <Tomwa> Wiesshund: I know you choose 1 at login but you'll have them all installed at once and from what I understand they all have their apps showing in the same list which can make them cluttered
[19:12] <Wiesshund> aSt3raL yes but do you need to have bot linux and windows up together, or would dual booting be an option?
[19:12] <tripelb-webchat> bamrejjeej: use more than one terminal window is a quick and dirty way.
[19:12] <abhijit> melymario, Powitanie
[19:12] <llutz> bamrejjeej:  esc + ch-number   or alt-1...9
[19:12] <abhijit> :D
[19:12] <AshWatson> ok so ive done step 16 on here http://ubuntuforums.org/showthread.php?t=1195275
[19:12] <Pici> bamrejjeej: or /win ChannelNum
[19:12] <AshWatson> now do i restart
[19:12] <AshWatson> ?
[19:13] <Pici> bamrejjeej: /join #newchannel     /msg user text or /query user
[19:13] <Monkey_Dust> bamrejjeej: i'm using irssi, you can switch between channels with ctrl-arrow left/right
[19:13] <tripelb-webchat> Monkey_Dust: thanks I didnt know that
[19:13] <AshWatson> Monkey_Dust
[19:13] <Wiesshund> Tomwa it doesnt do that for me, if im understanding you correctly
[19:13] <AshWatson> can you help me quick ?
[19:13] <Monkey_Dust> bamrejjeej: i'm using irssi, you can switch between channels with alt-arrow left/right, that is
[19:13] <Pici> bamrejjeej: #irssi would be more on-topic, as well as http://irssi.org/documentation
[19:13] <danieldd> abhij, thanks
[19:14] <tripelb-webchat> pici, I didnt ask but thanks to you too
[19:14] <danieldd> abhij, But what should I look for?
[19:14] <Matthes> sorry, lost connection, hit wrong keys
[19:14] <tripelb-webchat> and about my questions? 10.04livecdfails? ^^^
[19:14] <tripelb-webchat> I'm on a 10.04 livecd. Checked twice for integrity. programs quit: gparted, ff keeps quitting on certain sites (ubuntu help pages eg). This does not happen with 9.04
[19:14] <tripelb-webchat> I wanted to instal 10.04. I want my new,big HD to have partitions. I partitioned it with gparted. I opened install a couple of times just to look and not understand.  Now gparted "unexpectedly quits". FF keeps quitting too. None of this has happened on a HD install of 9.10 or on the 9.04 liveCd. Help!!
[19:15] <abhijit> danieldd, you should look here see https://help.ubuntu.com/community/Sound - https://help.ubuntu.com/community/SoundTroubleshooting - http://alsa.opensrc.org/DmixPlugin
[19:15] <Tomwa> Weisshund: Alright KDE is installing so I guess I'll see how it goes
[19:15] <Matthes> does someone here know a method to get fps rate out of any window?
[19:15] <danieldd> abhij, I've looked - and my problem is not that I don't have sound or bad quality or something, Everything is great except when I play 2 sounds at the same time. and I couldn't find any reference to that there
[19:15] <Wiesshund> Tomwa for me atleast, the desktops are separate, aside from my home/user/desktop folder of course
[19:16] <Jackster35> Guys, can you help on this:
[19:16] <Jackster35> http://pastebin.com/VSywfT79
[19:16] <Jackster35> It's confusing me
[19:16] <Dell__> can you tellme the command used for installing google chrome in unbuntu linux?
[19:17] <Dell__> s
[19:17] <Wiesshund> Dell__ apt-get install chrome ?
[19:17] <tripelb-webchat> Dell__: google download chrome and you will find it
[19:17] <danieldd> I think its apt-get install chromium-browser
[19:17] <Pici> danieldd: thats correct.
[19:18] <abhijit> Tomwa, just for your info what multiple DE can result in: https://bugs.launchpad.net/ubuntu/+source/pgadmin3/+bug/612053
[19:18] <danieldd> Pici: Thanks
[19:18] <BluesKaj> deavid, the default google browser for linux is chromium , sudo apt-get install chromium-browser
[19:19] <BluesKaj> Dell__, , the default google browser for linux is chromium , sudo apt-get install chromium-browser
[19:19] <danieldd> Hello. I'm running Ubuntu 10.04. When I try to play music from 2 sources at the same time (Listen to music while getting a new email), there is a sudden bass sound. Everything else is fine. The problem only starts when I play sound from 2 different programs at the same time.
[19:19] <Dell__> nick chandu
[19:19] <tripelb-webchat> danieldd: you get cant find chromium-browser  -- I always do it though the web page download.
[19:19] <ItsMeMario> hello guys, when i try execute a directfb application i get a /dev/fb0 device not found on my virtualbox ubuntu installation. Wich is the framebuffer device in this case?
[19:19] <Dell__> how can change my nick name on xchat?
[19:19] <danieldd> What do you mean?
[19:19] <danieldd> tripelb-webchat: What do you mean?
[19:19] <tripelb-webchat> Dell__:  /nick newnick
[19:20] <aSt3raL> what if i put ubuntu on a thumb drive...
[19:20] <abhijit> Dell__, /nick chandu
[19:20] <aSt3raL> would i be able to boot from that?
[19:20] <abhijit> aSt3raL, yes sure.
[19:20] <AshWatson> can somone help me with grub, cause people keep starting to help me then sttop
[19:20] <abhijit> aSt3raL, only the thing is that your computer should support booting from usb disk
[19:20] <Dell__> : /nick chandu
[19:20] <abhijit> Dell__, without any spaces before /nick
[19:20] <tripelb-webchat> danieldd: I mean ubuntu@ubuntu:~$ sudo apt-get install chromium-browser -yields--> E: Couldn't find package chromium-browser
[19:21] <Wiesshund> sudo apt-get install chromium-browser
[19:21] <Dell__> can we install google chrome in linux?
[19:21] <FloridaGuy> anyone has a d-link dwa usb wifu adpater
[19:21] <abhijit> !details | AshWatson
[19:21] <abhijit> Dell__, can you read the msg of Wiesshund ?
[19:21] <FloridaGuy> adwa 125
[19:21] <abhijit> Dell__, its just above your question
[19:21] <AshWatson> ubottu, iv givena ll of that people start helping me then jsut suddenly ignore me
[19:22] <FloridaGuy> d=link dwa-125
[19:22] <ItsMeMario>  I google something about the installation of the vesa driver and i can't find anything. Do you know how can i install it?
[19:22] <ItsMeMario>  I google something about the installation of the vesa driver and i can't find anything. Do you know how can i install it?
[19:22] <Matthes> I can't get sound running again on my ubuntu 10.4 system. :(
[19:22] <abhijit> AshWatson, just recall all of them using their nick?
[19:22] <Matthes> http://ubuntuforums.org/showthread.php?t=1550797
[19:22] <AshWatson> i didnt
[19:22] <Wiesshund> that apt-get just worked for me. no ive got to uninstall it but...
[19:22] <AshWatson> but they still dont answer
[19:22] <ItsMeMario> Matthes: try turn up the volum]
[19:22] <danieldd> tripelb-webchat: I'm using http://archive.canonical.com/ubuntu as a source
[19:22] <tripelb-webchat> I have a problem with 10.04livecd. I'm running ubuntu 10.04 liveCD. When I try to run gparted I get the following output, gparted unexpectedly quit. I expected it to load and show my my partitions.
[19:22] <AshWatson> i mean i did *
[19:22] <abhijit> AshWatson, ask your questin again.
[19:22] <AshWatson> ok
[19:22] <Matthes> ItsMeMario: I did
[19:22] <danieldd> Hello. I'm running Ubuntu 10.04. When I try to play music from 2 sources at the same time (Listen to music while getting a new email), there is a sudden bass sound. Everything else is fine. The problem only starts when I play sound from 2 different programs at the same time.
[19:23] <AshWatson> i installed ubuntu and done many updates and one update was grub
[19:23] <Guest94355> I'm looking for a program to convert flv to mp3 - I can only find instructions doing it one files at a time through terminal and I have a lot of files to convert - anyone recommend a program?
[19:23] <BluesKaj> Dell__, google chrome and chromium-browser are the same , the icons are different , that's about it , they will sync with each other on windows and linux
[19:23] <AshWatson> after i retstarted i got an error
[19:23] <ItsMeMario> hello guys, when i try execute a directfb application i get a /dev/fb0 device not found on my virtualbox ubuntu installation. Wich is the framebuffer device in this case?
[19:23] <AshWatson> error: no such device: (numbers + letters).
[19:23] <AshWatson> grub rescue>_
[19:23] <tripelb-webchat> I have been asking this same question for 4 days.
[19:23] <AshWatson> now ive booted up in ubuntu from the livecd, now what do i do ?
[19:24] <tripelb-webchat> I give up and will install 9.04
[19:24] <Wiesshund> tripelb-webchat how old is the machine in question?
[19:24] <ItsMeMario> hello guys, when i try execute a directfb application i get a /dev/fb0 device not found on my virtualbox ubuntu installation. Wich is the framebuffer device in this case?
[19:24] <ItsMeMario> hello guys, when i try execute a directfb application i get a /dev/fb0 device not found on my virtualbox ubuntu installation. Wich is the framebuffer device in this case?
[19:24] <ItsMeMario> hello guys, when i try execute a directfb application i get a /dev/fb0 device not found on my virtualbox ubuntu installation. Wich is the framebuffer device in this case?
[19:24] <ItsMeMario> hello guys, when i try execute a directfb application i get a /dev/fb0 device not found on my virtualbox ubuntu installation. Wich is the framebuffer device in this case?
[19:24] <FloodBot2> ItsMeMario: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[19:24] <ItsMeMario> hello guys, when i try execute a directfb application i get a /dev/fb0 device not found on my virtualbox ubuntu installation. Wich is the framebuffer device in this case?
[19:24] <S_p_or_t_o> quick opinion needed, working on a steam server going for 1000fps if possible on this pc, i'm following a guide modding the kernel and it says i should change the timer frequency to 100HZ, but i'm wondering if thats a typo, shouldn't i put the timer freq to 1000HZ
[19:24] <VCoolio> Guest94355: write a little script, like: for i in $(ls /folder); do convertcommand $i; done
[19:24] <Wiesshund> wtf?
[19:24] <xangua> tripelb-webchat: have you tried with the singe live-cd for gparted¿¿ you can fint it in it's site
[19:24] <io> !patient | ItsMeMario
[19:24] <Guest94355> f
[19:24] <AshWatson> anyone know ?
[19:24] <xangua> !repeat > ItsMeMario
[19:24] <io> !patience | ItsMeMario
[19:25] <Dell__> can we run window inside alinux?
[19:25] <ItsMeMario> xangua: ok... sorry
[19:25] <levene> AshWatson: I would investigate the grub config
[19:25] <Guest94355> VCoolio: I don't know how to write scripts! I'd be surprised if there weren't a program in repo for this?
[19:25] <ItsMeMario> ubottu: ok... sorry
[19:25] <bichonfrise74> does anyone know how to install multi-gnome terminal in Ubuntu 10.04?
[19:25] <ItsMeMario> io: ok... sorry
[19:25] <abhijit> !wine | Dell__
[19:25] <levene> AshWatson: but i don't recall the details of how to do it. I guess i'd try to google it. Or ask here :-)
[19:26] <AshWatson> ye but im new to all this so i dunoo what the hellk to do thats why ive come here to get instructions what i do, what commands i type etc
[19:26] <Shish> S_p_or_t_o: the kernel timer is how many times per second it switches between jobs -- each switch has overhead, so high frequency = can do many things, low frequency = does one thing well -- if your steam server is a single process, you want to go for the doing one thing well option
[19:26] <Dell__> nice
[19:26] <Wiesshund> AshWatson from what i understand it is best not to updage grub on a wubi install
[19:26] <xangua> Dell__: you can do it with a virtual machine
[19:26] <abhijit> !vm | Dell__
[19:26] <abhijit> :P
[19:26] <AshWatson> Wiesshund, sorry could you repeat what you said or pm me
[19:26] <levene> Guest94355: learn how to write one-line shell scripts. the time you spend doing it will be repaid ten thousand times over
[19:26] <S_p_or_t_o> Shish: thx, over thinking it lol
[19:27] <VCoolio> Guest94355: but you already know how to do it, right? so just apply it to all files in the folder you have and be done with it; or do 'apt-cache search convert flv' and see what pops up
[19:27] <Guest94355> levene: I enjoy learning! You have a suggestion for tutorials or should I just ask google?
[19:27] <trijntje> Guest94355, try soundconverter
[19:27] <levene> Guest94355: bash shell scripting howto is what I'd google for first
[19:27] <VCoolio> !abs | Guest94355
[19:27] <HeTaL> So a couple of days ago I attempted to install ubuntu 10 on my laptop. During the GUI installation it gave me the option to wipe my harddrive that had windows on it, or manually partition the harddrive, but no option to choose the allocated memory for Ubuntu like it did on 9. Am I doing something wrong?
[19:27] <Krishnandu> hey guys...wmv files are getting played on VLC but not on Totem.
[19:27] <djzn> when ubuntu 10.04.1 will be released ?
[19:28] <trijntje> Guest94355, and type: /nick yourOwnNick here to change your name, too many guests ;)
[19:28] <tripelb-webchat> xangua: I dont quite understand what you said. gparted on the 9,04 liveCD works. It worked on 10.04 until after I did the partition. I wanted to install Ubuntu on a brand new drive and have several partitions. I've sucessfully installed ubuntu several times on a used hard drive. When I get to the install-program-partition-screen I dont understand and am afreaid it will install over my windows drive. (I have a SATA 1T HD adb a
[19:28] <ownlife> I didn't want to change it while you were talking to me!
[19:28] <lap_dragon> I installed wine on ubuntu, how do I launch it?
[19:28] <AshWatson> Wiesshund ??
[19:28] <Wiesshund> AshWatson youve got the WUBI install. think your going to have to use the windows CD, boot in recovery console, and rebuild the MBR
[19:28] <erUSUL> lap_dragon: you can launch notepad or winecfg ( configuration utility ) but you can not launch wine per se.
[19:28] <ownlife> I'll try sound converter and try to learn this bashscripting
[19:29] <ownlife> Thank you fellows!
[19:29] <shsek> Hey, I'm getting "ALERT! /dev/mapper/foobar-root does not exists" error on boot (after messing up some stuff with initramfs-tools), but I can access my filesystem via the rescue mode of the Ubuntu Server CD. I think its because initramfs doesn't load the LVM2 module properly. How do I tell initramfs to load this module?
[19:29] <djzn> will 10.04.1 included K3B 2.0.0 in the repos?
[19:29] <ownlife> ubottu: That was the first site to pop up
[19:29] <erUSUL> lap_dragon: you launch a windows program and wine runs it under the covers
[19:29] <bichonfrise74> how do I add a shortcut to one of my application in Applications->Accessories?
[19:29] <ownlife> o.o
[19:29] <AshWatson> Wiesshund, i firstly got told to boot in ubuntu live cd and rebuilt it in there scondly i used Acer eRecovery and that didnt do anything to fix mbr
[19:29] <lap_dragon> eh?
[19:29] <ownlife> I just rofled
[19:29] <lap_dragon> oh
[19:29] <ownlife> thx
[19:29] <Dell__> is the chance of giving password after minutes during execution of program creates problem in linux?is there is any alternative solution?
[19:29] <lap_dragon> so I just download something like microsoft word and wine runs it automatically?
[19:30] <Wiesshund> AshWatson fdisk /MBR
[19:30] <Krishnandu> guys wmv files getting played on vlc but not on totem
[19:30] <lap_dragon> so it is more like a compatibility update rather than an os?
[19:30] <abhijit> !restricted | Krishnandu
[19:30] <stiwan> hi. can i update my bash? if so, how to? :)
[19:30] <xangua> tripelb-webchat: gparted live CD http://gparted.sourceforge.net/download.php
[19:30] <S_p_or_t_o> lap dragon: in terminal type: chmod +x <filename> first
[19:30] <xangua> !appdb | lap_dragon
[19:31] <etalyc> bichonfrise74: right-click the menu button or bar and click on "Edit Menus". Should be easy from there
[19:31] <Krishnandu> abhijit, thanks...But I don't think it's a codec issue...then it wouldn't get played on VLC too
[19:31] <lap_dragon> ok
[19:31] <tripelb-irssi> xangua: firefox "unexpectedly quits" on 10.04liveCd as well as gparted "unexpectedly quitting" so I am back in irssi
[19:31] <bsdfreak> any way to terminate a hung file operation in gnome?
[19:31] <Wiesshund> AshWatson i dont think acer recovery disk is going to rebuild the mbr, they arent real windwos cds. i suppose you could boot a live cd and remove all the partitions, then restore windows. you are going to lose everything though. wubi is best if grub is not updated :(
[19:32] <abhijit> Krishnandu, hmm
[19:32] <Krishnandu> abhijit, any other idea buddu??
[19:32] <VCoolio> Krishnandu: totem uses gstreamer to play; vlc has it's own thing; so it does matter; there is also mplayer and xine to play video; use whatever you like
[19:32] <abhijit> Krishnandu, cant say look for forums
[19:32] <FloridaGuy> does anyone have a D-Link DWA-125 wireless usb wifi adter
[19:33] <FloridaGuy> adpter
[19:33] <FloridaGuy> spelling sucks today
[19:33] <bsdfreak> Anyone here use Unison?  If so, do you like it as a backup/sync tool?
[19:33] <Wiesshund> tripelb-irssi can you test the live cd on another machine to make sure that is no issue with the cd itself?
[19:33] <djzn> 10.04.1
[19:34] <tripelb-irssi> I want to dual boot my computer. I have windows on a 40G IDE drive sda - I have a new 2T drive sdb that I want to be my main drive. I want to be able to run the machine with the windows drive physically off the computer.
[19:34] <tripelb-irssi> Weisshund, I have run the integrity test on the 10.04 liveCD twice. Yes it's on this computer but that should be good enough, right?
[19:34] <Dell__> which one is best?fedora linux or ubuntu?
[19:35] <VCoolio> !best | Dell__
[19:35] <tucemiux> tripelb-irssi, how is ubuntu a problem?
[19:35] <tripelb-irssi> Wiesshund, I have run the integrity test on the 10.04 liveCD twice. Yes it's on this computer but that should be good enough, right?
[19:35] <tripelb-irssi> Wiesshund: I have no problems with the 9.04 livecd
[19:35] <richardus> what's the difference between apt-get upgrade and apt-get dist-upgrade
[19:36] <Wiesshund> tripelb-irssi 1) install ubuntu with windows drive unplugged. 2) im not sure, does live cd have memtest86 you can run?
[19:36] <Dell__> in linux world the code of programming is same..
[19:36] <llutz> richardus:" man apt-get" tells you
[19:36] <VCoolio> richardus: different handling of dependencies, see 'man apt-get'
[19:36] <tucemiux> tripelb-irssi, would you like to transfer the OS in your 40 gig HD to your 2T HD?
[19:36] <Pici> !dist-upgrade | richardus
[19:36] <erUSUL> richardus: diest-upgrade does dependency resolution different. it may uninstall packages to resolve them
[19:36] <vatzec> FYI
[19:36] <vatzec> 19:34 < vatzec> Hey, Ubuntu folk! Does anybody know of a piece of software that would allow me to insert subtitles into a  movie file?
[19:36] <Slart> richardus: say that the new version of gedit needs another package that the old gedit didn't need.. apt-get ugrade won't upgrade gedit since it would require it to install a new package.. apt-get dist-upgrade will upgrade gedit.. that's the difference
[19:37] <ubuntu420> hello, how can i tell what driver im using for my graphic card ?
[19:37] <vatzec> nthe answer is mencoder
[19:37] <Wiesshund> tripelb-irssi 1) is after you move windows to a new partition on the 2tb drive of course
[19:37] <Dell__> can you help me about passing of pointersto another pointer in c programming?
[19:37] <Pici> Dell__: Thats not really on-topic here, please ask in ##C
[19:37] <djzn> #ubuntu-dev
[19:38] <tucemiux> ubuntu420, "system-->Administration-->hardware drivers", if you havent been there before most likely youre using the default drivers with no 3D acceleration
[19:38] <Dell__> how can i install linux in window?
[19:38] <shiftingcontrol> i gnome-system-manager show my both processor usgae always to 95+ usage,i run 4 terminals+vlc+firefox+eclipse only
[19:39] <ubuntu420> tucemiux: yes, i believe i am using the default settings since this a new installation.
[19:39] <ubuntu420> i see no proprietary drivers installed.
[19:39] <bindi> hey, anyone here got Asus PCE-N13 wlan adapter?
[19:39] <bindi> I got 10.04 and it wont work
[19:39] <bindi> http://ubuntuforums.org/showthread.php?t=1476007 i followed this guide, but instead of the 2.3 version i got 2.4
[19:39] <tucemiux> ubuntu420, if you want to install the proprietary drivers, ask in the room how to do that and mention what video card you have, all in **one line***
[19:40] <VCoolio> Dell__: if "window" = MS Windows use wubi, but separate install on it's own partition is recommended
[19:40] <Kwpolska> bindi: what is the problem
[19:40] <bindi> and everything went ok, other than "sudo ifconfig wlan0 down/up", said "no such device"
[19:40] <bindi> well no wireless :P
[19:40] <bindi> 02:00.0 Network controller: RaLink RT2860
[19:40] <bindi> hmm
[19:40] <bindi> think tis actually named "ra0"
[19:41] <AshWatson> to fix my grub problem couldnt i just reinstall ubuntu onto my d: drive ?
[19:41] <Dell__> i am using window 7 home basic
[19:41] <shiftingcontrol> top shows 213 process,6 running remaining as sleeping
[19:41] <llutz> bindi: "iwconfig" should show you wireless interfaces
[19:41] <AshWatson> Wiesshund, couldnt i just reinstall ubuntu to fix my grub error ?
[19:41] <kunji> AshWatson: typically you want to install grub to the MBR, but I don't know what your exact setup is.
[19:41] <ubuntu420> hello all, i would like to install the proprietary drivers for a ati 9600se 128mb agp card ?
[19:41] <Rinsmaster> aww, I just uploaded an .ogv to youtube and it turned out 100% green -.-
[19:42] <AshWatson> hm
[19:42] <thune3> shiftingcontrol: top or processes tab (click %cpu) of gnome power monitor should show what processes are actually consuming cpu.
[19:42] <kunji> AshWatson: you probably could, unless the default install was screwed up.
[19:42] <erUSUL> ubuntu420: do not think propietary drivers support that card
[19:42] <AshWatson> no all it did was update then when i restarted that error came up
[19:42] <AshWatson> ubuntu worked fine
[19:42] <bindi> llutz: indeed it did
[19:42] <ubuntu420> really, no support for it.
[19:43] <bindi> "Bit rate: 1Mb/s", lol
[19:43] <bindi> its not connected to anything though
[19:43] <AshWatson> but then it told me to update grub so i did then restarted and that error came up
[19:43] <Wiesshund> AshWatson you said you have already let the acer recovery cd run correct?
[19:43] <bindi> and I dont see any connections in the Network connections -> Wireless tab
[19:43] <AshWatson> Wiesshund, i used Acer eRecovery, thats recovered from a partition
[19:43] <AshWatson> not a cd
[19:43] <AshWatson> so yes the c: drive has been recovered
[19:44] <trond-> Dell__, You can use the windows installer... that should take care of most things.
[19:44] <Wiesshund> AshWatson ok just so you understad, linux no longer exists on your drive now
[19:44] <shiftingcontrol> thune3:vlc 2,gnome-sys-monitor:8
[19:44] <trond-> ubuntu420, with that nick, are you using a dell d420?
[19:44] <AshWatson> Wiesshund, nope all there is is my c: drive with windows on it and my d: drive which is empty
[19:45] <Wiesshund> AshWatson ok just so long as you understood that part, ok so now we gotta remove grub
[19:45] <AshWatson> ok lets do it, Wiesshund
[19:45] <Wiesshund> AshWatson your recovery partition boot has no console rescue tools then correct?
[19:46] <AshWatson> dont think so
[19:46] <thune3> shiftingcontrol: that doesn't sound like much. i guess I'm confused about what you are interpreting as a problem.
[19:47] <shiftingcontrol> thune3:after clciking on resources tab i find cpu1:91.1% and cpu 2:98.5%
[19:47] <Wiesshund> AshWatson dd if=/dev/null of=/dev/sdX bs=446 count=1 change sdX to reflect your drive of course
[19:47] <shiftingcontrol> i m wondering wic occupies
[19:47] <AshWatson> Wiesshund, what ?
[19:47] <Wiesshund> AshWatson that will rewrite the MBR and remove grub
[19:47] <AshWatson> so where do i type that ?
[19:47] <Matthes> I can't get any sound out of my notebook. please take a look at http://ubuntuforums.org/showthread.php?t=1550797 for more details
[19:47] <kunji> AshWatson: Oh, I see, yeah, a complete reinstall will fix it, just don't update GRUB it the next time then.  I had that problem.  I would recommend learning to fix it properly though so you can go ahead and update, then fix it.  Here's a decent GRUB guide: Looks like Wiesshund has got things handled here though.
[19:48] <Wiesshund> AshWatson boot a live cd.
[19:48] <AshWatson> ok and i click try correct ?
[19:48] <ubuntu420> how can i get the opensource radeon driver to install in ubuntu ?
[19:48] <AshWatson> try or install ubuntu, Wiesshund ?
[19:48] <Wiesshund> AshWatson try
[19:48] <kunji> AshWatson: yeah, then open terminal.
[19:49] <AshWatson> ok give me a sec
[19:49] <AshWatson> Wiesshund, now what, open terminal ?
[19:50] <Wiesshund> AshWatson yes
[19:50] <shsek> Hey, I'm getting "ALERT! /dev/mapper/foobar-root does not exists" error on boot (after messing up some stuff with initramfs-tools), but I can access my filesystem via the rescue mode of the Ubuntu Server CD. I think its because initramfs doesn't load the LVM2 module properly. How do I tell initramfs to load this module?
[19:50] <AshWatson> ok ive opened terminal < Wiesshund
[19:50] <calebwright> i have jaunty with the mysql-server package installed (5.0), what's the best method of upgrading to mysql-server-5.1? aptitude wants to uninstall then reinstall, which would wipe the db
[19:50] <Wiesshund> AshWatson go to your msg window so i can paste things to you ok?
[19:51] <AshWatson> ok
[19:51] <h00k> !pastebin | Wiesshund, AshWatson
[19:51] <Wiesshund> h00k thanks but dont need pastebin for this
[19:52] <Wiesshund> too slow
[19:52] <janicko> I have a problem with connecting wireless router model Belkin F6D4230 on Ubuntu 9.10 . Is there anybody who would help me?
[19:53] <Wiesshund> dd if=/dev/null of=/dev/sda bs=446 count=1
[19:53] <Wiesshund> oops
[19:54] <sha1sum> Hey all. Having great results on this Dell Inspiron 6000. The only thing I'm not getting working is the microphone jack. How would one troubleshoot this problem if he knew the mics all worked?
[19:55] <abhijit> !sound | sha1sum
[19:55] <jj_> whatdo you do if u just installed linux server and u cant remba username and pass u used
[19:55] <jj_> ?
[19:55] <shsek> Please, anyone? anything?
[19:56] <ubuntu420> thanks guys for the help.
[19:56] <shsek> I've been asking this question for a couple of hours... am I doing somethign wrong? should I include more information?
[19:56] <Pici> shsek: You may want to try asking in #ubuntu-server as well.
[19:56] <ChogyDan> !password | jj_
[19:56] <shsek> Pici, will do, thanks!
[19:57] <kx> ssh login show a screen full of statistics about the server instead of a simple last logged in line. How do I get rid of all the statistics info at ssh login?
[19:57] <jj_> its linux server
[19:58] <Ddorda> what are the permissions that should be on ~/ ?
[19:58] <ngenen> Ddorda, in your home ?
[19:58] <remote> where's xorg.conf
[19:58] <Ddorda> indeed
[19:58] <remote> ?, may I add
[19:58] <VCoolio> Ddorda: I have 700
[19:59] <Slart> kx: this might be helpful http://www.howtogeek.com/howto/ubuntu/change-ssh-welcome-banner-on-ubuntu/
[19:59] <ngenen> Ddorda, in ubuntu it's normal 766
[20:00] <ngenen> or u+rwx, g+rx, o+rx
[20:00] <ngenen> btw, what is the ubuntu dev channel '
[20:01] <doc100> hey guys, does anyone know how to change the default place for new windows to appear? By default, most of them appear in the upper left corner, which is annoying because I have to then manually center them. Another option would be for the app to remember what place I leave it at when I close it and then reopen in the same place. Does anyone know if this is possible to change? Or is it something that apps do themselves and can't be over-r
[20:01] <doc100> idden? Thanks!
[20:01] <JackWoot> hello
[20:01] <Pici> ngenen: #ubuntu-devel, but be aware its not a support channel.  See also https://wiki.ubuntu.com/IRC/ChannelList
[20:03] <FloridaGuy> does anybody use the d-link dwa-125 wireless usb wifi
[20:03] <doc100> Does anyone know how to get Ubuntu Lucid to join wireless at startup? It's a desktop, so there network will never change, and I hate waiting like 20 seconds after I log in for the network to autoconnect. Shouldn't I be able to have it join at boot?
[20:03] <kx> Slart I tried that earlier, but the motd file they mention is already 0 bytes on my machine.
[20:03] <Maser>  OS: Windows 95 CPU: Intel Pentium OverDrive @ 133 MHz core, 64 KB Video: Intel GMA  (640x320x8bpp 60Hz) Sound: N/A Memory: 32/64MB Uptime: 9 Days , 15 hours , 3 Minutes 19 seconds ,  HD Space: Free: 26.32 MB/31.86 MB Connection: P.Tech Modem @ 26.6 Kbps
[20:04] <tripelb-irssi> tucemiux, (lag cause I got a phone call)  Re the XP on the 40G. No I dont want to transfer it. I have just installed it. This is a Dell so I have legal Windows. I can use it for my webcam (that wont work in Ubuntu), for Photoshop, for Windows-games that come on movie-DVDs which I have never gotten a chance to try, other things that do not work on linux. So I want to have a Windows option, but keep it to its own HD. Especially since
[20:04] <aeon-ltd> Maser: awesome pc :), sounds like a nice router/server/music player
[20:04] <tripelb-irssi> tucemiux, What is my problem? I want to install 10.04 on a Dell 4600 which has a new 1T SATA drive (sata on m'board) and IDE drive/s. I partitioned the new drive, but do not understand the install-prog-partitioning-window. In the end I want to be able to boot without the Windows drive in, but when it is there be able to boot XP by choice. I have 4 small old drives to copy files and integrate onto the new drive. I thought I'd put th
[20:05] <Slart> kx: it will print out the motd but there's also a setting in the sshd config file about printing out last login info.. perhaps there's something similar for statistics
[20:05] <tripelb-irssi> Wiesshund: (sorry, time, I had a phone call to handle) 2. you mean to test my-computer's memory. I have no problems with the 9.04liveCD or 9.10installed. I can safely say it's not my-computer. 1. (How) Can I install grub for a dual boot option later on if I do not have a windows disk on -board at time of Ubuntu-install?
[20:05] <kikela> hi, somedy now what is missing : i don't have irc capability on Empathy (lucid lynx x64)
[20:05] <Matthes> Hello. My ubuntu 10.4 system stays mute whatever I do. details at http://ubuntuforums.org/showthread.php?t=1550797 any ideas how to fix the problem?
[20:05] <tripelb-irssi> kikela - that is true. 10.04 comes with no IRC client. (sadly)
[20:06] <ewook> not that sought after I guess?
[20:06] <tripelb-irssi> Matthes - "is it plugged in" "is it turned on"  -- those questions have saved my "parts" many times.
[20:07] <kx> Slart the wierd thing is I have nothing in the motd file and PringLastLog set to no already. Go figure .
[20:07] <tucemiux> tripelb-irssi,  you can do pretty much what you want BUT you need to decide what you want to do, it's straight forward
[20:07] <Matthes> tripelb-irssi: I have build in speakers (laptop)
[20:08] <tripelb-irssi> Matthes, well that's the best I can do. Good luck. There are more experienced persons here.
[20:08] <FloridaGuy> d-link wireless and ubuntu dont like each other
[20:08] <Matthes> tripelb-irssi: ok, thanks :)
[20:08] <Slart> kx: doesn't the server print out something about the canonical reporting service? some kind of cloud thing?
[20:09] <thune3> kx: i think motd now uses /etc/update-motd.d/* files
[20:09] <kx> Slart It gives me a url to canonical to graph out the statistics
[20:10] <tripelb-irssi> tucemiux, I dont know what I dont know so it's hard to ask. I am lost and it's been days. I am not going to remove the windows drive and also remove the partitions with 9.04 and see if I can install Ubuntu that way. I am in the state of "giving up". I've been into ubuntu for over a year but I'm stymied constantly. It's a neverending project. (good thing I like to tinker.)
[20:10] <Snowe> hi, um, i recently installed kde beside ubuntu, and its still using the gnome login screen, i used the gnome login manager inside kde and inside gnome and set it to use kde login, nothing.. i used the kde login manager, nothing.. how might i make it use my new login theme from kde? i really really dont want to remove gnome despite the glitch risk, since i like having the gnome settings handy in kde and such, soo any help would be appreciat
[20:10] <chemical_death> Matthes:  try this https://help.ubuntu.com/community/HdaIntelSoundHowto
[20:10] <Snowe> ed.
[20:10] <kikela> tripelb-irssi, there is a way to enable irc on lucid lynx
[20:10] <Matthes> chemical_death: thanks
[20:10] <Slart> kx: yes, that's the one
[20:10] <ailleantsian> hiya all, i currently have a issue with my nvidia drivers failing at boot up and i have to boot in failsafe, i have looked at my x log and at the kernel log but it doesnt mean much to me
[20:10] <tripelb-irssi> kikela, yes, install irssi, install pidgin, or xchat, or use a web client.
[20:10] <kx> thune3 I'll check that out
[20:10] <elkclone> kikela: yes look for xchat with the package manager.
[20:11] <doc100> How can I join wireless at boot?
[20:11] <tripelb-irssi> kikela I HIGHLY recommend xchat2 (use apt-get to install) and not xchat-gnome which is what you get with the package manager.
[20:12] <tripelb-irssi> kikela, xchat2 is an older model.
[20:12] <elkclone> doc100: my install  connected auto the 2nd time I rebooted.
[20:12] <elkclone> first time I had  to enter the wireless pass.
[20:12] <tripelb-irssi> kikela, pidgin you can just install. for xchat2 I think you have to enable some repository.
[20:12] <MOH> Im gonna pick the world up and am gonna drop it on the ground
[20:13] <kikela> tripelb-irssi, i use xchat 2.8.6 is the good one ?
[20:13] <tucemiux> tripelb-irssi,  like i said before, it's very ***straight forward** BUT you need to decide what you want to do.  Meaning, you now have 2 drives, you need to decide what you want on what hard drive, like I said before it's straighforward and anyone here can help you with that but we cant decide for you, YOU need to decide what you want where and then ask away, we can help you with partioning and the like, for starters-- I can tell you th
[20:13] <tucemiux> at I did the same with my laptop, bought a new 200 gig HD, I had a 40 gig HD with windows on it, I transfer windows using linux into the new HD then installed ubuntu on the new HD, worked like a charm
[20:13] <doc100> elkclone, But did you have wireless instantly at login? My computer remember it's WiFi (its a desktop, so it never changes), and autojoins, but I have to wait like 30 seconds after my desktop loads for it to connect.
[20:13] <elkclone> universe
[20:13] <VCoolio> MOH: good luck, tell the people in #ubuntu-offtopic how it went
[20:13] <trism> doc100: in the network-manager connection editor, if you check the "Available to all users" box when editing the connection, it will connect immediately on boot
[20:13] <janicko> I have a problem with connecting wireless router model Belkin F6D4230 on Ubuntu 9.10 . Is there anybody who would help me?
[20:13] <tripelb-irssi> tucemiux: I want ubuntu on the 1T Hitachi and Windows on the 40G. No waffeling.
[20:13] <neek_> How do I check the partitions in busybox prompt? when I type fdisk it says "fdisk: not found"
[20:14] <Wavesonics> so i have sendmail setup, but I want to haev a SMTP server for receiving mail as well, what packages do i need?
[20:14] <ailleantsian> janicko: wasnt i speaking to you ealier, did you look at the ndiswrapper ?
[20:14] <kx> thune3 yep that's where it's coming from
[20:14] <elkclone> I did a ubuntu insall on my laptop last night. ^5
[20:14] <kx> Slart it's coming from /etc/update-motd.d/* file
[20:15] <doc100> trism, Okay, done! I'll try rebooting and post results. Thanks!
[20:15] <Slart> kx: ah.. I was just installing a server machine in a vm to see what it looked like
[20:15] <TELL0> hello humans
[20:15] <elkclone> it's been so long since I used debian I need a refresher for bash.
[20:16] <neek_> Is there any way to check for partitions on the disk via busybox? I need to know what partition is the linux partition on my friend's laptop so that I can correct it in grub.
[20:16] <Slart> !bash | elkclone
[20:16] <ubuntu420> This has kinda been a small issue, and I am at my wits, try to get this to work successfully. I have enabled under: System > Preferences> Remote Desktop; and I enabled the check box to allow other users to view the desktop, but it will not give me access from another OS for example windows 7. How can i get this to work
[20:16] <kikela> tripelb-irssi, ok thanks, i'll try it !
[20:16] <ailleantsian> janicko: have you got a wireless card installed and actively working ?
[20:16] <tucemiux> tripelb-irssi,  1T is a lot of space for ubuntu, I suggest you create a live CD and use gparted to partition your drive first, the easiest install is to create 1 primary partition with 1 gig for "swap" - then create one extended partition and use all of the remaining space, then I would create an extended partition of about 10 gigs for "/" and another 20 gigs for "/home",  I would create partitions just to hold data for ubuntu and anoth
[20:16] <tucemiux> er to hold data for windows
[20:16] <Makuseru> Im having some problems with audio over HDMI, (HP G60, Nvidia 8200M, Kubuntu 10.04) anyone know how I can get sound over hdmi working?
[20:16] <wechat> Snowe: during installing you must be promted "choose KDM or GDM" You hade to make your choise on that step of installing
[20:17] <elkclone> ubotu: ty I am familiar with many distros. just rusty :-|
[20:17] <Snowe> wechat so theres no way to change it now?
[20:17] <neek_> Is there any way to check for partitions on the disk via busybox? I need to know what partition is the linux partition on my friend's laptop so that I can correct it in grub.
[20:17] <ZykoticK9> elkclone, ubottu isn't a real person, she's a bot.
[20:18] <Slart> elkclone: I was thinking more of the last link.. the UsingTheTerminal url..
[20:18] <neek_> How do you know that bot is a she?
[20:18] <maco> !gender | neek_
[20:18] <Slart> neek_: we've checked, of course =)
[20:18] <ZykoticK9> neek_, the creator says it's a she
[20:18] <VCoolio> Snowe: try: dpkg-reconfigure gdm
[20:18] <wechat> Snowe: I can't say. I only mention that I always choose KDM *during installation*
[20:18] <ZykoticK9> maco, wow never saw the !gender factoid before - funny/thanks
[20:18] <kx> Slart hmmm..... there should be a simple switch to turn it off. PrintLastLog no is not it
[20:18] <d09e4td06> Fatal error in __driConfigOptions line 1, column 0: unknown encoding.
[20:18] <d09e4td06> Google Earth has caught signal 6.
[20:18] <d09e4td06> We apologize for the inconvenience, but Google Earth has crashed.
[20:18] <d09e4td06>  This is a bug in the program, and should never happen under normal
[20:18] <d09e4td06>  circumstances. A bug report and debugging data have been written
[20:18] <d09e4td06>  to this text file:
[20:18] <d09e4td06>     /root/.googleearth/crashlogs/crashlog-4c644904.txt
[20:18] <FloodBot2> d09e4td06: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[20:18] <livingdaylight> maco, yo! you dere?
[20:19] <maco> !paste | d09e4td06
[20:19] <elkclone> she is already more useful than last gf.
[20:19] <ailleantsian> hiya all, i currently have a issue with my nvidia drivers failing at boot up and i have to boot in failsafe, i have looked at my x log and at the kernel log but it doesnt mean much to me
[20:19] <Wavesonics> which is hte best IMAP mail server?
[20:19] <maco> livingdaylight: i dont have an answer, sorry
[20:19] <Wavesonics> Dovecot, Courier?
[20:19] <Slart> !best | Wavesonics
[20:19] <livingdaylight> maco, just to let you know it was a mess. In the end I re-installed Ubuntu
[20:20] <maco> livingdaylight: oh ok :-/
[20:20] <Flannel> Wavesonics: I prefer dovecot
[20:20] <neek_> Is there any way to check for partitions on the disk via busybox? I need to know what partition is the linux partition on my friend's laptop so that I can correct it in grub.
[20:20] <tripelb-irssi> tucemiux: OK I will. (I already did but not quite as you said. I have /boot / /home /d1 120-drive /d3 /d4 (boot is primary and the rest are all logical partitions on an extended partition. --- what happened was the installer said it needed me to specify a root partition. I had no idea how to do that. -----> You must understand one thing. There will be no Windows at all on the 1T Hitachi drive.
[20:20] <Snowe> wechat: didnt quite work
[20:20] <livingdaylight> maco, I've reinstalled the brother drivers and the printer is working fabulously, however, despite installing the scanner drivers I'm not getting to scan. If you have any ideas - most welcome
[20:20] <Wavesonics> Slart, ok thanks
[20:21] <maco> livingdaylight: dont know sorry. i have luckily always had scanners that Just Work
[20:21] <livingdaylight> ok
[20:21] <tripelb-irssi> Snowe: http://webchat.freenode.net   (sorry if its not relevant just ignore)
[20:21] <tripelb-irssi> kikela, how did it work out?
[20:22] <wechat> Snowe: I think you were said right to make dpkg -- I found this link  http://tinyurl.com/6e5gxo
[20:22] <tripelb-irssi> tucemiux: I am saving your advice on a flashdrive
[20:22] <tucemiux> tripelb-irssi, you can install ubuntu to a second drive without a problem, that's how I began using linux, because I was afraid I might damage my windows hard drive, just make sure youre pointing at the right drive when you install ubuntu, choose to manually partition your drive
[20:22] <Snowe> wechat: sorry i had a noob moment >~<;; forgot to use sudo, i got it now
[20:22] <ubuntu420> This has kinda been a small issue, and I am at my wits, try to get this to work successfully. I have enabled under: System > Preferences> Remote Desktop; and I enabled the check box to allow other users to view the desktop, but it will not give me access from another OS for example windows 7. How can i get this to work
[20:23] <wechat> Snowe: anyway you need this option (I always choose it there) http://tinyurl.com/38vqgx6
[20:23] <tripelb-irssi> tucemiux: ok I will come back and if you are here tell you how it went. I'm going to do what I said. Peace out for a while.
[20:23] <tripelb-irssi> tucemiux: and what you said.
[20:23] <janicko> ailleantsian: it is not responding, i do not know how to install it
[20:24] <tucemiux> tripelb-irssi, this is how I would partition that 1TB drive:  "swap" 1 gig -- primary,  2dary "/" 10 gigs,  2dary "/home" 20 gigs, dont really need a "/boot" partition
[20:24] <kx> Slart I have a PrintMotd no in sshd_config  and it still shows up :(
[20:24] <elkclone> mm remote desktop should only allow native os.
[20:24] <Snowe> brb~ testing
[20:24] <EvilPhoenix> kx:  try restarting the sshd
[20:24] <wechat> Snowe: it's better to forget (and remember later) to use sudo than always be root  :)
[20:24] <tucemiux> tripelb-irssi, like I mentioned, you dont really need a "/boot" partition, unless you know what youre doing
[20:25] <Slart> kx: install is soon done... google hasn't been very helpful with this.. apart from the link I found which didn't really help a lot
[20:25] <Wavesonics> so i think i may have previously installed a mail server, but i don't know, any ideas on how i could check?
[20:25] <ubuntu420> elkclone:  only ubu to ubu and not win to ubu, is that what u mean ?
[20:25] <neek_> Is there any way to check for partitions on the disk via busybox? I need to know what partition is the linux partition on my friend's laptop so that I can correct it in grub.
[20:26] <elkclone> ubuntu420: vncviewer ununtu-desktop:0
[20:28] <d09e4td06>   p, li { white-space: pre-wrap; }  Google Earth could not write to the current cache or My Places file location. The values will be set as follows: My Places Path: "/home/iyoet/.googleearth"
[20:28] <d09e4td06> Cache Path: "/home/iyoet/.googleearth/Cache"
[20:28] <E8newallm> Anyone know a good music player?
[20:28] <elkclone> http://www.howtogeek.com/howto/ubuntu/allow-remote-control-to-your-desktop-on-ubuntu/
[20:29] <d09e4td06> can someone help me with that error???
[20:29] <d09e4td06>   p, li { white-space: pre-wrap; }  Google Earth could not write to the current cache or My Places file location. The values will be set as follows: My Places Path: "/home/iyoet/.googleearth"
[20:29] <d09e4td06> Cache Path: "/home/iyoet/.googleearth/Cache"
[20:29] <FloodBot2> d09e4td06: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[20:29] <elkclone> oops
[20:29] <aeon-ltd> E8newallm: sonata + mpd
[20:29] <Slart> kx: the system information is printed out for a normal login as well.. not just ssh.. so changing sshd configs might not work
[20:29] <janicko> ailleantsian: do you think i would able to have success with wireless router when i upgrade to newer version of ubuntu?
[20:29] <E8newallm> Thanks :)
[20:29] <Snowe> wechat: it worked :D thank you~
[20:30] <neek_> Is there any way to check for partitions on the disk via busybox? I need to know what partition is the linux partition on my friend's laptop so that I can correct it in grub.
[20:31] <quizno50> @neek_ - the best thing I can think of would be to do: ls /dev/sd* or ls /dev/hd*
[20:32] <tucemiux> neek_, if the partition is mounted then use "mount"
[20:33] <kx> Slart you could change the update.mot.d dir files but then you kill it all the time
[20:34] <henkpoley> Are there 802.11n USB sticks that work out of the box on Ubuntu 10.04 ?
[20:35] <henkpoley> Yes, I know about the wiki. But that assumes you know by heart what model number supports what wifi standards.
[20:36] <marek_> hello all
[20:36] <Jordan_U> henkpoley: Any reason you want USB rather than PCI?
[20:36] <ubuntu420> i have followed that tutorial, and it does not seem to work on 10.4 ?
[20:37] <tripelb-irssi> tucemiux: hah no I dont know what I am doing, but am prepared to learn. Everyone starts out not knowing what they are doing.
[20:37] <|magic|> sera
[20:37] <|magic|> !chat
[20:37] <kx> Slart brb I'm going to reboot and see if that helps because PrintMotd is set no
[20:37] <|magic|> !chat
[20:37] <henkpoley> Jordan_U: I don't have that many other systems anymore with PCI. But then, most of them already have WiFi too.. so..
[20:38] <henkpoley> Jordan_U: what PCI solution would you recommend then ?
[20:38] <zoug> |magic|, why is ubottu showing pidgin? should be empathy right?
[20:38] <tripelb-irssi> tucemiux: what I do not understand is why gparted and firefox keep quitting when I am using the 10.04 liveCD and not when I use the 9.04 liveCd or a 9.10 installed ubuntu.
[20:38] <tucemiux> tripelb-irssi, if youre not experienced then instead of having a "/boot" partition I would have a "/" -- "/boot" is basically used to store boot information so unless you know what youre doing I wouldnt have a "/boot" partition, just create a "swap" , "/", and "/home" partition that will hold ubuntu itself, then create 2 other partitions that will hold your data
[20:39] <wedwo> henkpoley, I have linksys wusb54gc v3 that required only blacklisting one driver
[20:39] <Frots> Wiesshund: Hi, have you had a time to look at my problem?
[20:39] <tucemiux> tripelb-irssi, i suspect lucid doesnt play nice with your hardware, use what you know works, no need to experiment here
[20:39] <Frots> or tucemiux
[20:39] <tripelb-irssi> tucemiux: wait to answer (if you are still here) till I return in 9.04 since I cant even use firefox from this 10.04 livecd
[20:39] <henkpoley> wedwo: looks like that's a b/g one, isn't it ?
[20:40] <Wiesshund> Frots no you never replied, i thought you left
[20:40] <Jordan_U> henkpoley: I believe that all madwifi chipsets (that are internal and support N in hardware) have full N support in linux.
[20:40] <Frots> Wiesshund: sorry, I think I missed your message
[20:40] <Frots> what was it?
[20:40] <tripelb-irssi> tucemiux: PS the windows data partition is a good idea. I can put all media there. Glad yo mentioned it.
[20:41] <wedwo> henkpoley, yes you're right - my bad
[20:41] <henkpoley> Jordan_U: so that means Atheros chipsets
[20:41] <nacho> hola
[20:42] <tucemiux> hola nacho
[20:42] <Laggg> hola
[20:42] <ZykoticK9> !es
[20:43] <Laggg> reccomendations on something better than pidgin?
[20:43] <Jordan_U> henkpoley: Yes, that's what I meant sorry. I actually recommend the ath5k and ath9k drivers over the madwifi drivers, it was just a typo.
[20:43] <MetaGod> hi
[20:43] <henkpoley> Jordan_U: I'll check this list for local availability: http://wireless.kernel.org/en/users/Drivers/ath9k/products/external
[20:45] <ianwizard1> I've got an EeePC, and I'm trying to get the basic hardware working (fan, hotkeys, etc)  with the module eeepc-laptop.  I know that this is right, but I can't get it to load, it just says "No such device!".  I've done this before, but I just reinstalled, and I can't get it to work.   I thought that what I did to get it to work before was just boot with elevator=CFQ  but that's not fixing it now.  What might I do?
[20:47] <henkpoley> ianwizard1: the 'elevator' is merely a performance tweak. Also, CFQ has been standard for 3 years already (or maybe even far more)
[20:47] <Hello-Kitty> Hey, guys.  Had a quick question.
[20:47] <ubuntu420> has anyone been able to access ubuntu remotely ?
[20:47] <ianwizard1> henkpoley: I just know what worked before.  (Or apperantly not.)
[20:47] <ZykoticK9> ubuntu420, ssh all the time...
[20:48] <ubuntu420> ssh is console cmd only !
[20:48] <Hello-Kitty> After running a system update I'm having a strange error.  Everytime I boot up now I have to manually start my Ethernet adapter.
[20:48] <ZykoticK9> ubuntu420, with X forwarding that is incorrect
[20:48] <ianwizard1> What else might cause it to not recognize the hardware as what it is.
[20:48] <ubuntu420> i'd prefer to see the desktop.
[20:48] <henkpoley> ianwizard1: I expect anything you need to know is described here: https://help.ubuntu.com/community/EeePC
[20:48] <Hello-Kitty> I end up running ifconfig eth0 up and dhclient eth0
[20:49] <henkpoley> ianwizard1: especially : https://help.ubuntu.com/community/EeePC/Fixes
[20:49] <ZykoticK9> ubuntu420, if you need a "desktop" ssh isn't right for you actually... good luck man.
[20:49] <ianwizard1> ubuntu420: use rdesktop, (rdp)
[20:49] <Hello-Kitty> ZykoticK9: Lmao. =P
[20:49] <ubuntu420> install rdesktop on ubuntu will allow me to access ubuntu-desktop remotely from windows ?
[20:50] <ianwizard1> henkpoley: I'll look, but the first time it took me two weeks to sift through the net, and a little trial and error.
[20:50] <quizno50> with ssh you can use the -X option and it will automatically set the DISPLAY environment variable...
[20:50] <quizno50> and forward all X11 traffic through the SSH session... works like a champ for me at school...
[20:50] <Frots> rdesktop is a security flaw
[20:50] <Wavesonics> i just installed postfix, but when i try and run: sudo dpkg-reconfigure postfix i get: /usr/sbin/dpkg-reconfigure: postfix is broken or not fully installed
[20:50] <Wavesonics> any ideas?
[20:50] <henkpoley> ubuntu420: no the other way around, you will be able to see windows from ubuntu
[20:51] <tucemiux> ubuntu420, no, rdesktop will let you acess windows remotely from ubuntu
[20:51] <ZykoticK9> Wavesonics, try "sudo apt-get -f install"
[20:51] <sha1sum> Sorry all. Got a phone call right after asking before, but I'm having great results on this Dell Inspiron 6000. The only thing I'm not getting working is the microphone jack. How would one troubleshoot this problem if he knew the mics all worked?
[20:51] <synne27> is there anyway to get divx server client installed on ubuntu? i have a home cinema from samsung :)
[20:51] <IanWizard> Frots: I doubt it itself is a security "flaw" but it is somewhat insecure.
[20:51] <henkpoley> ubuntu420: I recommend NoMachine NX for remote desktops, they have a free version for non-commercial use
[20:51] <Frots> IanWizard: that makes it a flaw doesnt it
[20:52] <Wavesonics> ZykoticK9, ldconfig deferred processing now taking place
[20:52] <Wavesonics> Errors were encountered while processing:
[20:52] <Wavesonics>  postfix
[20:52] <Wavesonics> E: Sub-process /usr/bin/dpkg returned an error code (1)
[20:52] <FloodBot2> Wavesonics: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[20:52] <IanWizard> no, it has a flaw, or a vuln
[20:52] <Wavesonics> whops
[20:52] <IanWizard> it however is not a flaw.
[20:52] <Frots> IanWizard: I wont feed you
[20:52] <IanWizard> but it's really a matter of opinion anyway
[20:52] <Frots> this channel went downwards with all these trolls
[20:52] <IanWizard> Frots: ?? but I like rss
[20:53] <ZykoticK9> Wavesonics, sorry i have no more ideas - something is obviously wrong with postfix on your system - you might want to search launchpad for any related bugs.  Good luck.
[20:53] <Wavesonics> ZykoticK9, ok thanks
[20:53] <IanWizard> Frots: It is technically (in my opinion) incorrect, but I'm sorry that I said anything.
[20:53] <Guest85740> i installed xubuntu on my fuji siemeans computer and the sound don't work when i plug in my speakers... it's just became quiet, heeelp
[20:54] <coz_> Guest85740  open a terminal   type   alsamixer   see if any sliders are down or muted...if muted hit the "m" keyboard letter to unmute
[20:54] <Frots> IanWizard: yes, ok you can say that now I dont know if I can trust you anymore
[20:55] <husimon> so
[20:55] <husimon> i have a partition i do a du on
[20:55] <husimon> it says i have 50 gigs used
[20:55] <elkclone> frots: lmao
[20:55] <husimon> i do a df
[20:55] <FloodBot2> husimon: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[20:55] <ZykoticK9> !enter | husimon
[20:55] <husimon> ya ya i got it.
[20:55] <Guest85740> coz_ i have already tried that
[20:55] <husimon> it says i have 115gb used, why would the file system be in this odd state?
[20:55] <Frots> elkclone: can I laugh with you?
[20:55] <IanWizard> Frots: I'm not sure that makes sense, but I can always come back under a different nick later, and nobody know who I am, or anything about my past.
[20:55] <Guest85740> coz_ all sliderza is umuted
[20:56] <coz_> Guest85740,  they are "all" muted?
[20:56] <husimon> i recently deleted a large file ~60gb but it doesn't seem to have really freed up the space?
[20:56] <Frots> IanWizard: I know how people like you handle, don't tell me about it
[20:56] <elkclone> frots: yah m8te. cause you gotta laugh before you cry.
[20:56] <coz_> Guest85740,  then start with the first one ...hit the keyboard letter  "m"  to unmute and the arrows to turn up the volume
[20:56] <Frots> elkclone: that is a nice philosophy indeed :)
[20:56] <husimon> and this was with rm, it didn't goto a recycle bin.
[20:57] <coz_> Guest85740,  if that doesnt work go to #pulseaudio channel or the #alsa channel
[20:57] <Guest85740> coz_ thx
[20:57] <coz_> Guest85740,  let me know if you get this remedied and how :)
[20:57] <elkclone> frots: don't ever get provoked into flaming someone. just keep your head cool .
[20:58] <Guest85740> coz_ yes, i will :)
[20:58] <Frots> elkclone: thanks man, you have to be a veteran in here
[20:59] <elkclone> frots: I am irc veteran.  not neccesarily this room.
[20:59] <Frots> Well that is definitally clear to me elkclone :) thanks for the advice
[20:59] <elkclone> np
[21:00] <thune3> husimon: your question was so fragmented and incomplete it is hard to understand your problem. could you try it all on one line?
[21:00] <Godzilla> Sup everybody.
[21:00] <elkclone> most ppl on freenode have some class and compasion.
[21:00] <meh2> how to remove dbus-launcher? it opens so many ports and procs its annoing
[21:00] <elkclone> Godzilla: ^5
[21:01] <meh2> yeah
[21:01] <husimon> thune3, so it looks like somehow i've deleted part of the file but the space hasn't been freed up yet.  So I need to figure out how to get linux to release that inode.
[21:01] <husimon> i think somehow there is an open filehandle pointing at the file and then i deleted it and its not releasing the space.
[21:01] <elkclone> darn
[21:02] <erUSUL> husimon: fsck
[21:02] <ZykoticK9> husimon, what filesystem are you using on the drive?
[21:02] <henkpoley> Jordan_U: I don't think I can get any of the cards marked as supported by the ath9k driver. Well.. I can get a 'discontinued' cardbus one, which I coincidentally do have a slot for on the PC. But then the PC's front door won't close anymore.
[21:02] <Pici> meh2: I recommend against doing that, there are a number of desktop tools that depend on dbus.
[21:02] <husimon> erUSUL, ya that was my thought, i just didn't feel like rebooting :P
[21:02] <husimon> ZykoticK9, ext4
[21:03] <elkclone> reboot is the root of all evil.
[21:03] <ZykoticK9> husimon, is this connected by USB?
[21:03] <mechcozmo> hi, I have encountered this bug: http://osdir.com/ml/ubuntu-bluetooth/2010-04/msg00029.html and would like to know if there is a fix
[21:03] <husimon> ZykoticK9, nope its my home dir
[21:03] <Jordan_U> husimon: sudo fuser /path/to/deleted/file
[21:03] <husimon> Jordan_U, sec, trying.
[21:04] <janicko> need help to extract exe file, but wine didn't help me
[21:04] <sha1sum> PulseAudio input problems? Anyone? Output and headphone jack auto-sense is working correctly, but microphone jack registers no signal at all.
[21:04] <husimon> Jordan_U, the filename? or just the path?
[21:04] <jeffb> Question: Will the apache 2.2.16 be included in ubuntu 10.04.01 to fix the ssl bug?
[21:04] <ag3nt_d0ubl3> hi all
[21:04] <husimon> Jordan_U, I guess only the path since the file isn't there
[21:04] <jeffb> hello.
[21:04] <ubuntu420> Does vnc-server working on ubuntu ?
[21:05] <Jordan_U> husimon: The full path including what the filename was before it was deleted.
[21:05] <fajkje> hello folks.  i'm googling around and not coming up with much about why chromium's latest build that i got from upgrade manager won't start now.  gdb shows a segfault but i don't know where to go from there
[21:05] <husimon> Jordan_U, doesn't work since it says the file doesn't exist
[21:06] <thune3> husimon: you could also try "lsof | grep somefilenamepattern"
[21:06] <husimon> thune3, tried that first, didn't show up
[21:06] <mechcozmo> hi, I have encountered this bug: http://osdir.com/ml/ubuntu-bluetooth/2010-04/msg00029.html and would like to know if there is a fix; lsusb says I  am using a Cambridge Silicon Radio dongle
[21:07] <ubuntu420> Is this still supported https://help.ubuntu.com/community/FreeNX
[21:07] <Jordan_U> husimon: sudo lsof | grep /path/to/deleted/file
[21:07] <Godzilla> fajkje: I got this problem just yesterday, I didn't have perms on it's config folder
[21:07] <fajkje> Godzilla: ahhh will check right now
[21:07] <bindi> hey. anyone here has idea how to fix "Green HDMI" problem? everything thats supposed to be black is green. this happened on Windows too, but only during startup. Fixed when windows was loaded. but now I'm using ubuntu 10.04 and this problem wont go away
[21:08] <ubuntu420> whats the difference between FreeNX and Google's NeatX ?
[21:08] <Godzilla> fajkje: I was restoring some files, and root owned it.  wouldn't start till I fixed it
[21:08] <Aeronius> So I'm running 9.10, I have a encrypted home partition, what should an upgrade to 10.4 do? (I've held off because I've been working on some papers, but I finally finished them...)
[21:08] <cypher-neo> ubuntu420, That link you provided explains all the differences.
[21:08] <silverstone> Q: a) I do gksudo nvidia-settings b) set resolution to 1600x1200 - works perfectly c) I press 'save to x conf file' <- this is confirmed to work. d) I restart f) resolution reset to 1280x1024, xorg.conf seems to be > ignored <. Running 10.04 latest nvidia prop drivers 256.44
[21:08] <husimon> Jordan_U, ya tried that, nothing.
[21:08] <fajkje> Godzilla: we talking about ~/.config/chromium ?  i have perms on it and on everything under it that i can see so far
[21:08] <silverstone> Q: not sure how to attack this problem
[21:09] <husimon> Jordan_U, even tried lsof +L1 to list all files with less then a link count of 1
[21:09] <ubuntu420> cypher-neo: just saw it.
[21:09] <Godzilla> fajkje: yeah, if not that then I don't know
[21:09] <ubuntu420> will try out freenx
[21:09] <Jordan_U> husimon: Are there other hard links to the same file?
[21:09] <Aeronius> So I'm running 9.10, I have a encrypted home partition, what should an upgrade to 10.4 do? (I've held off because I've been working on some papers, but I finally finished them...) *anyone*
[21:09] <cypher-neo> ubuntu420, And since FreeNX is not supported by Ubuntu, it
[21:09] <tobyrose115> Hi Guys, having an issue with static IP addresses, for some reason the computer wont let me/wont connect to the network when I assign a 192.168.x.x ip address that the rest of my network uses but works with a 10.0.x.x address that it gets from DHCP, DHCP server is currently a router and am running 10.04.
[21:09] <Godzilla> fajkje: sorry
[21:09] <fajkje> Godzilla: thanks for hte idea though.
[21:10] <cypher-neo> ubuntu420, And since FreeNX is not supported by Ubuntu, while it may work on Lucid... I don't know how long that will last.
[21:10] <dri-problems> hi, anyone available for a question?
[21:10] <husimon> Jordan_U, i didn't make any..
[21:10] <dri-problems> i have a huge problem!
[21:10] <mechcozmo> tobyrose115: do you have any other 10.0.x.x addresses?
[21:10] <Godzilla> dri-problems: then just ask
[21:10] <husimon> Jordan_U, and du -sh shows less space then df -kh shows for that partition
[21:10] <cypher-neo> ubuntu420, However, the package seems to be in active development.
[21:10] <ubuntu420> thats great.
[21:10] <mechcozmo> tobyrose115: your ubuntu box will be on a different subnet than the rest of the network and incapable of talking to anything but what is inside its own subnet (black voodoo magic excluded)
[21:10] <ubuntu420> hope it worls
[21:10] <ubuntu420> works
[21:11] <tobyrose115> no none on the network, all the rest are 192.168, the router seems to be doing some NAT though as it doesnt have an 10.0.x.x in the connected dhcp clients list
[21:11] <cypher-neo> ubuntu420, Let me know how it goes. :)
[21:11] <Aeronius> *anyone* so if I upgrade, will it break my internet? nvidia drivers? sound system?
[21:11] <dri-problems> look. i just installed ubuntu. i'm really happy for it. i installed it on a partition. then, after i test it for a couple of days, i decide to give up windows and delete it. the next second, i can't open my notebook anymore. i reinstalled windows now. and now, it doesn't ask me to pick which OS i wanna log into.
[21:11] <dri-problems> how can i fix this?
[21:11] <ubuntu420> cypher-neo: will do
[21:11] <kx> Slsart you still here
[21:11] <Godzilla> dri-problems: what you need is a live disk so that you can reinstall grub
[21:11] <mechcozmo> tobyrose115: if your router is also in the 10.0.x.x network, then it will not communicate with your ubuntu box
[21:12] <Godzilla> dri-problems: are you sure that you just deleted Windows, and not anything else?
[21:12] <dri-problems> Godzilla, i'm new to linux. i never had it, i am a computer noob. please tell me as if i was a little retard.
[21:12] <ubuntu420> Aeronius: try it for yourself, it does not break then your all good, if it does well good luck.
[21:12] <husimon> Guess i'll reboot and it will unlink
[21:12] <husimon> oh well
[21:12] <dri-problems> well, i had windows on C, and ubuntu on E. i deleted / formatted the whole C.
[21:12] <Godzilla> dri-problems: let me google for a how to
[21:12] <husimon> dri-problems, lol
[21:12] <dri-problems> i still have ubuntu folder in the E partition.
[21:12] <xangua> dri-problems: if you installed windows in all the disk, reinstall ubuntu; if you did it in a separate partition restore the grub; you can try that with supergrubdisk
[21:13] <rainrain> trying to write a html mail in evolution, does anyone how do it get it to parse the markup, cant see it anway
[21:13] <Godzilla> dri-problems: do you still have the cd that you installed ubuntu from?
[21:13] <dri-problems> no, i downloaded it for free from the web site.
[21:13] <Aeronius> ubuntu420: you mean a live cd? of course...
[21:13] <husimon> dri-problems, you've overwritten your boot loader :)  you'll have to reinstall grub via the live cd
[21:13] <dri-problems> i don't know what a 'grub' is...
[21:13] <chemical_death> dri-problems: try EasyBCD it helps you to get your ubuntu in windows bootloader
[21:13] <tobyrose115> mechcozmo: how do I know if my router is in the 10.0.x.x network?  am slightly confused by it to be honest!
[21:13] <Godzilla> dri-problems: grub is your bootloader, it is what loads the operating system
[21:14] <mechcozmo> tobyrose115: are you on ubuntu or windows currently?
[21:14] <husimon> http://www.howtogeek.com/howto/ubuntu/reinstall-ubuntu-grub-bootloader-after-windows-wipes-it-out/
[21:14] <dri-problems> i must say i use an Acer netbook.
[21:14] <husimon> that's for you dri-problems
[21:14] <Godzilla> dri-problems: how did you install ubuntu?  did you use wubi? or did you boot into the installer
[21:14] <dri-problems> im looking now.
[21:14] <husimon> i love the path to that page :)
[21:14] <dri-problems> i downloaded the .iso image and with daemon tools i installed it on a blank partition.
[21:14] <tobyrose115> mechcozmo: the machine im typing from is windows, but the ubuntu box is next to me on the desk...
[21:14] <Godzilla> husimon: lol
[21:14] <lap_dragon> Can I get manycam to work on ubuntu? I downloaded wine but everytime I open it, it "encounters a problem and needs to close"
[21:14] <KB1JWQ> dri-problems: Mounted or installed?
[21:14] <husimon> course that may not work since you had it on E and not C
[21:15] <Godzilla> dri-problems: oh, your running live, you haven't really installed ubuntu
[21:15] <husimon> so its probably hd0,1
[21:15] <dri-problems> mounted, then installed it.
[21:15] <mechcozmo> tobyrose115: start->run->"cmd"; type "ipconfig"
[21:15] <husimon> instead of hd0,0
[21:15] <mechcozmo> tobyrose115: what's the gateway?
[21:15] <dri-problems> i preffer to keep other stuff on C :)
[21:15] <Godzilla> dri-problems: ok, do you have a flash drive?  2gb or bigger?  or can you burn a cd?
[21:15] <tobyrose115> 192.168.1.1
[21:16] <ubuntu420> Aeronius: if your running a liveCD it will not break your system.
[21:16] <dri-problems> i have both. but i preffer th eflash drive, since i didnt install anything now. since i just installed windows to be able to get in here.
[21:16] <dri-problems> flash drive in!
[21:16] <mechcozmo> tobyrose115: and it's giving out 10.0.x.x addresses?
[21:16] <janicko> need help to extract exe file, but wine didn't help me
[21:16] <cypher-neo> lap_dragon, Why are you trying to run your cam through Wine? Why not use a Linux cam program?
[21:16] <Jordan_U> janicko: What do you mean by "extract"? Is it a self extracting archive?
[21:16] <tobyrose115> yes but only to the ubuntu box and only since a fresh install today, its giving a 192.168.x.x address to all the other boxes on the system
[21:17] <lap_dragon> are ther any good linux programs that are similar to manycam?
[21:17] <Aeronius> Right.  So I use virtualbox, and I would like to back up my Windows virtual machine but it will take at least 2 dvd's to backup, any suggestions?
[21:17] <husimon> Aeronius, external hd?
[21:17] <Aeronius> None, is there a program to break files into parts?
[21:17] <kubanc> did any off you had GCJ PLUGIN: thread and then ssegmentation fauult in web browser? i'm having this problem in google-chromium
[21:17] <cypher-neo> lap_dragon, If a webcam is supported on Linux it can be used by any program that supports cams.
[21:17] <janicko> Jordan_U: actually it is instaling program for wireless router and need to open it for installing it on ubuntu
[21:18] <mechcozmo> tobyrose115: so your router is giving out class-C addresses to everything like we'd expect, but Ubuntu is getting a class-A address... correct?
[21:18] <xangua> lap_dragon: and what does that do¿
[21:18] <Aeronius> I have a lot of blank dvds
[21:18] <lap_dragon> does linux support logitec?
[21:18] <husimon> Aeronius, ya i'm sure you can google something to do that
[21:18] <mechcozmo> tobyrose115: (class C: 192.168.x.x. class A: 10.x.x.x)
[21:18] <lap_dragon> xangua, manycam adds fun effect to cameras
[21:18] <cypher-neo> lap_dragon, There's no need for this program since webcam support is usually installed.
[21:18] <tobyrose115> mechcozmo: pretty much, hench im confused by it!
[21:18] <Aeronius> I was thinking maybe RAR or some command line utility could do that
[21:18] <Jordan_U> janicko: I doubt it's needed, have you tried just connecting via ethernet and going to "192.168.1.1" in a web browser to configure the router?
[21:18] <lap_dragon> well, I dont see my cam on my computer
[21:19] <mechcozmo> tobyrose115: on the ubuntu box, what does ifconfig tell you?
[21:19] <xangua> lap_dragon: install cheese
[21:19] <cypher-neo> xangua, It's eye candy for a camera. Retarded program and a waste of HD space... in my humble opinion.
[21:19] <mechcozmo> tobyrose115: might try "sudo ifconfig en0 down";"sudo ifconfig en0 up"
[21:19] <mechcozmo> tobyrose115: or whatever your adapter's name is
[21:19] <Jordan_U> Aeronius: split is a simple terminal based utility for splitting files.
[21:20] <lap_dragon> ok
[21:20] <cypher-neo> lap_dragon, There are dozens of webcam programs available in the Synaptic Package Manager. I suggest you start there with a search.
[21:20] <ubuntu420> cypher-neo: im stuck on section 4 of the install, it says to install necessary files and create the special user "nx" do i need to modify that line ?
[21:20] <bindi> *ahem* excuse me for repeating, but ive got a problem on my htpc running ubuntu 10.04. the graphics card is an integrated one, i3 530... and its connected to my TV with hdmi. and everything thats supposed to be black, is green. basically everything is green-ish
[21:20] <ubuntu420> https://help.ubuntu.com/community/FreeNX
[21:20] <aef> how can i enable the visual alert in lucid. earlier versions had it in the sound settings
[21:21] <Castbound> hello guys, I have a problems to mount an MP3 player device, system detects it but it won't list it in fdisk -l  http://ubuntu.pastebin.com/nv790vpm
[21:21] <janicko> Jordan_U: my problem is i do not know how to install it. It seems it not recognize it and i had advice i should try to windows wireless drivers. and from there i am stuck
[21:21] <zack25> ahah you have all problem!!!!
[21:21] <Jordan_U> aef: Are you using compiz ("Desktop Effects")?
[21:21] <zack25> :D
[21:21] <cypher-neo> ubuntu420, Refresh my memory. What are you installing again?
[21:21] <cypher-neo> ubuntu420, Oh, FreeNX... one sec
[21:21] <aef> aef: no, i don't even have 3d acceleration on the machine
[21:21] <ubuntu420> cypher-neo: http://pastebin.com/ZuyR5Auq
[21:22] <ubuntu420> cypher-neo: FreeNX
[21:22] <EdwardL> Ok, here comes a nice tricky one... Is there some way I can make a HDD image, that is actually like a symbolic link to a folder?
[21:22] <ubuntu420> Server
[21:22] <guntbert> bindi: the usual cause for such problems is a cable/socket where one pin is not connected
[21:22] <Jordan_U> janicko: Are you trying to get your wireless card working, your wireless router working, or both?
[21:22] <bindi> guntbert: the cable is fine though
[21:22] <rainrain> images seem to be blocked somewhere in my evolution email - anyone have any suggestions for me
[21:22] <tobyrose115> mechcozmo: no result for en0 up or down, just no output on screen, is there a verbose option? same issue if i try to edit the /etc/network/interfaces file it doesnt have an entry for the eth0 device. with ifconfig though it gives eth0 as existing and address as 10.0.0.3
[21:22] <kx> test
[21:22] <bindi> guntbert: tested with a ps3 and the very same computer, just windows 7
[21:22] <Jordan_U> EdwardL: That question doesn't make sense. What is your actual end goal?
[21:22] <theoctagon> kx: accomplished
[21:22] <guntbert> bindi: sorry then, was only an idea
[21:23] <mechcozmo> tobyrose115: they don't give output
[21:23] <lap_dragon> how do I enable my camera?
[21:23] <mechcozmo> tobyrose115: if you're operating on eth0, then replace en0 with eth0
[21:23] <janicko> Jordan_U: both, for now i have no succes
[21:23] <MTec007> hello, im using pendrivelinux to create a portable linux install and i need to figure out how to make it completely persistant. is there something i can do in ubuntu to do that? technically im on the livecd right now, but its running off my portable harddrive.
[21:23] <ZykoticK9> tobyrose115, is this a VirtualBox VM install?
[21:23] <tobyrose115> mechcozmo: I did! en0 gave a device not found error
[21:23] <mechcozmo> tobyrose115: makes sense
[21:24] <cypher-neo> ubuntu420, I've never used FreeNX before...
[21:24] <tobyrose115> mechcozmo: nope, full install
[21:24] <Jordan_U> janicko: If you can work on them separately that will simplify things greatly. Do you have an already configured wireless router available to use while working on getting your wireless card working?
[21:24] <ubuntu420> k.
[21:24] <lap_dragon> I can't get it to work on tinychat a box keeps appearing that says "click allow and remember"
[21:24] <mechcozmo> tobyrose115: after running the down/up cycle what does ifconfig eth0 give?
[21:24] <cypher-neo> ubuntu420, If that command doesn't work though, you might try switching to the option listed for older versions.
[21:24] <lap_dragon> But I don't see any clickable allows or remembers
[21:24] <aef> Jordan_U: any idea?
[21:24] <livingdaylight> maco, got it all working - YESSS!
[21:24] <cypher-neo> ubuntu420, You would need to change some of the syntax though
[21:24] <mechcozmo> tobyrose115: the name depends on the kind of card you have.  i get en0, you get eth0, you can get all kinds of other names...
[21:24] <livingdaylight> chemical_death, victory! Ich hab's geschaft!
[21:25] <levene> how do I get rid of this error when I run apt-get update? W: GPG error: http://ppa.launchpad.net lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 79114BDCE21DD54D
[21:25] <tobyrose115> mechcozmo: yeah realise that, after the up down cycle it give the same information, still 10.0.0.3
[21:25] <levene> it seems to have started to appear recently
[21:25] <Jordan_U> aef: Are you familiar with "gconf-editor"?
[21:25] <aef> Jordan_U: yes
[21:26] <EdwardL> Jordan_U: Ok, I've installed VirtualBox, and I'm installing WinXP on that. What I can see in the VirtualBox is that it only accepts images and no folders as HDDs. Wish to make sdb7 look like a new partition in this virtual WinXP.
[21:26] <Jordan_U> aef: Try changing "/apps/metacity/general/visual_bell
[21:26] <lap_dragon> anybody kno how to get my logtec webcam to work on ubuntu?
[21:26] <lap_dragon> *logitec
[21:26] <fajkje> hmmm i'm looking at the backtrace and other gdb output from chromium-browser's repeated crashing... i don't know what to make of any of it
[21:26] <levene> !gpg
[21:26] <aef> Jordan_U: so why did they remove the config option?
[21:26] <da> If you have "Ubuntu 10.4" . how do you like it?
[21:26] <sideone> lap_dragon; i havent worked with that in a while, but you may want to look into the v4l drivers
[21:26] <levene> !signature
[21:26] <levene> !signatures
[21:26] <mechcozmo> tobyrose115: ifconfig eth0 192.168.xxx.xxx (replace the x with valid numbers)
[21:26] <levene> !pubkey
[21:27] <levene> !publickey
[21:27]  * lap_dragon has no idea what v4l drivers mean or are
[21:27] <janicko>  Jordan_U: no, i am not such prof. and need help. I bought wireless router and i thought it would work but when i connect it it didn't recognize and i just tryed to do it in way i did with wired but that wasn't working and from there i am lost
[21:27] <mechcozmo> tobyrose115: actually, does your router let you set DHCP addresses by MAC address?
[21:27] <Jordan_U> aef: I don't know, and it may in fact have just been moved. I didn't use the feature before.
[21:27] <Jaimen> hola buenas tardes
[21:27] <sideone> lap_dragon http://qce-ga.sourceforge.net/
[21:27] <soreau> levene: KEY=completekeyhere; gpg --keyserver subkeys.pgp.net --recv $KEY && gpg --export --armor $KEY | sudo apt-key add -
[21:28] <tobyrose115> mechcozmo: dont know if it does or not, havnt tried it. after the ifconfig 192.168.x.x i assume i need to run a up and down cycle?
[21:28] <mechcozmo> tobyrose115: nope
[21:28] <tobyrose115> mechcozmo: ok it changed the ip but now no internet connectivity
[21:28] <Jordan_U> janicko: What have you done so far in Ubuntu for configuring things? If you can't remember everything you've done then I think it's work initially debugging from a LiveCD as it's a known environment.
[21:28] <mechcozmo> tobyrose115: but if your router does have that option, it may be the easiest; just tell it the address you want it to get and the MAC address of the card, and ta-da!
[21:28] <Jordan_U> janicko: *worth
[21:29] <maco> aef: if its gone, that definitely an accessibility bug
[21:29] <tobyrose115> mechcozmo: same as happened to me when i attempted manual change before
[21:29] <mechcozmo> tobyrose115: are you on a university network?
[21:29] <levene> soreau: hm, so that will somehow be secure and everything? i guess the subkeys.pgp.net server should be trusted
[21:29] <guntbert> !es | Jaimen
[21:29] <tobyrose115> mechcozmo: nope im at home!
[21:29] <mechcozmo> tobyrose115: with, say, another DHCP server around?
[21:29] <mechcozmo> tobyrose115: huh.
[21:29] <levene> soreau: erm, and thanks :)
[21:30] <anmol284> Hello Ubuntooers, I am trying Ubuntu, and need help regarding Wireless, I am having trouble connecting Wifi with WEP hex key. Seems like NetworkManager does not have this option, Is this true, if yes then what can I do ??
[21:30] <MetaGod> Anyone experienced with wow under wine? I get fine fps for 1 min then horrible 1-4 fps for 30 secs Constant cycle?
[21:30] <tobyrose115> mechcozmo: no im not on a uni netowrk, the only dhcp server is on the router, i did run a dhcp server from this box a few weeks ago but removed it in the end
[21:30] <maco> aef: im asking in #ubuntu-accessibility
[21:30] <janicko> Jordan_U: I just installed windows wirelles driver and than i don't know how to move on. Need help very badly
[21:30] <xangua> !appdb | MetaGod
[21:31] <mechcozmo> tobyrose115: are you sure you removed everything? it may still be thinking that it needs a certain network configuration to support the DHCP server
[21:31] <MetaGod> Ubottu thx
[21:31] <frxstrem> is there a good code editor (not IDE) for Ubuntu (not Gedit)?
[21:31] <quizno50> @frxstrem I do most all my coding with kate... part of the K Desktop Environment
[21:31] <tobyrose115> mechcozmo: Im pretty sure i did, I formated the box....!
[21:31] <mechcozmo> tobyrose115: might need to hire an exorcist, i hear daemons can be tricky to remove
[21:32] <henkpoley> Jordan_U: It's cheaper for me to get a 2nd hand 802.11n Airport Extreme than to get a "needs compilation on every kernel update" add-on wireless card. So I'll probably go with that..
[21:32] <mechcozmo> :D
[21:32] <anmol284> @quizno50 BLASPHEMY :-P
[21:32] <tobyrose115> mechcozmo: haha, cheers for the help anyway!
[21:32] <henkpoley> Jordan_U: most of the other stuff here is Apple anyways..
[21:32] <mechcozmo> tobyrose115: yeah, sorry mate
[21:32] <mechcozmo> tobyrose115: i'm dealing with my own Ubuntu issues, no un
[21:32] <mechcozmo> **fun
[21:33] <tobyrose115> mechcozmo: yeah, im just really confused as to why its doing it, also the odd config of the interfaces file with no mention of eth0
[21:33] <Jordan_U> janicko: You probably didn't need to install windows wireless drivers. Can you run "lspci" in a terminal and pastebin the output?
[21:33] <aef> Jordan_U: the option in gconf exists but it doesn't work if changed, even after x restart
[21:34] <mechcozmo> tobyrose115: i've never touched the interfaces file, always used ifconfig
[21:34] <quizno50> =) I'm a KDE fan... I just wish it could be more stable at times...
[21:34] <aef> Jordan_U: could this be related to the fact that i'm on a headless system running vnc4server anyhow?
[21:34] <janicko> Jordan_U: where or what is output (sorry for my stupidity)
[21:35] <sideone> i would like to build a lin* box with squid (2 or 3) +transparent +ldap/smb/winbind (ms ad) + username logging w/ output via sarg. Is it possible to configure this type of system? also, will firefox work without prompting for user creds? i really would like to keep it transparent so that user/pass arent sent plain text throughout my network as i will be using AD information. I will need to have username reporting for the higherups as IP/hostname is not
[21:35] <anmol284> @quizno50 I too am KDE fanboi, have been using it since the day I stopped using Ubuntu 5 years back. Love it and hate it the same time.
[21:35] <sideone> i heard kde had gotten verryyy slow with refresh on nv chipsets
[21:36] <quizno50> @anmol284 stopped using Ubuntu? What do you use now?
[21:36] <Jordan_U> janicko: "output" is what a command prints to the screen when you run it from a terminal.
[21:36] <Jordan_U> !terminal | janicko
[21:36] <anmol284> @quizno50  I use arch
[21:36] <MTec007> why does a 30GB NTFS hard drive show up in 10.04 but not a 320GB NTFS usb HD?
[21:37] <aef> Jordan_U: additionally, have you any idea on this? http://serverfault.com/questions/169633/why-doesnt-drag-and-drop-work-on-my-ubuntu-based-vnc-desktop
[21:37] <anmol284> @sideone So I am not the only one. That is the part I hate about KDE. It has been this way since 4.0.
[21:37] <janicko> Jordan_U: ok got it. where you want to paste it again?
[21:37] <Jordan_U> !pastebin | janicko
[21:37] <sideone> anmol284: yeah i just use console, but used to love kde back in the day
[21:38] <Slart> MTec007: no idea.. anything in the logs when you connect it?
[21:38] <SauLus> when I plug out the ethernet cable my system freezes. When I pull it back on, after some time, it unfreezes. Any idea why this is happening?
[21:38] <quizno50> @anmol284 what desktop does arch use?
[21:38] <MTec007> i dont think i can disconnect it to see, im using pendrivelinux to load ubuntu livecd
[21:39] <Jordan_U> aef: Sounds like the mouse events may not be being sent properly. Have you tried testing with "xev"?
[21:39] <guntbert> tobyrose115: did I read correctly? you have a machine that seems to get its ip address from another dhcp server?
[21:39] <anmol284> @quizno50 KDE, I am one of few people who even used 4.0 as their default DE/SC
[21:40] <aef> Jordan_U: the symbols are displayed as being dragged
[21:40] <aef> they are pulled back if released
[21:40] <sideone> anmol284; i used to use blackbox over kde most of the time
[21:40] <rainrain> anyone know how to change the text size for evolution
[21:40] <VCoolio> quizno50: arch uses no de by default, you choose what to install
[21:40] <sideone> then blackbox forked to flux and was still great an minimal
[21:40] <Jordan_U> aef: Odd, no idea then.
[21:41] <quizno50> nice... I'll have to give it a try sometime...
[21:41] <janicko> Jordan_U: done it
[21:41] <maco> aef: audible bells are also gone, so you're not missing anything without the visual bell it seems
[21:41] <maco> aef: compiz is able to do a visual bell
[21:41] <aef> Jordan_U: indeed, very odd
[21:41] <Jordan_U> janicko: You need to post the URL for the paste here.
[21:41] <anmol284> @sideone I can understand why you would do that. Kwin is the part which sucks and rocks at the same time.
[21:41] <new-user> Hey, how do I let Dbus auto start?
[21:41] <maco> aef: can you join #ubuntu-accessibility?
[21:41] <aef> maco: but compiz doesn't work without acceleration, or does it?
[21:41] <maco> aef: right...you need acceleration
[21:42] <maco> (which is why i told the person who suggested that in the a11y channel that its not ideal)
[21:42] <sideone> anmol284: :)
[21:42] <janicko> Jordan_U:    silly me     http://paste.ubuntu.com/477125/
[21:42] <meera> I am looking to find lugs server, but cant find.
[21:43] <isolat3dsh33p> how do I become root in terminal? I tried `su -` and entered my password but failed. :(
[21:43] <new-user> Everytime I reboot I need to manually type /etc/init.d/dbus restart...How do I make it auto run at boot?
[21:43] <VCoolio> isolat3dsh33p: sudo -i    be careful with that, change back to normal user when ready
[21:43] <ZykoticK9> isolat3dsh33p, "sudo -i" but you shouldn't need to ;)
[21:44] <Jordan_U> janicko: Is it a USB wireless dongle?
[21:44] <kyle_> trying to run truecript install script. i have to cmod it or something if i rememeber
[21:44] <isolat3dsh33p> VCoolio, ZykoticK9, thanks! I'm doing nmap tutorial. So I need to :)
[21:44] <new-user> anyone can help me with the problem?
[21:44] <guntbert> isolat3dsh33p: normally you type sudo <privileged command>, and present your own password
[21:45] <VCoolio> kyle_: sh script    or chmod +x script   then run it
[21:45] <isolat3dsh33p> guntbert, thanks :)
[21:45] <guntbert> isolat3dsh33p: no problem :)
[21:45] <janicko> Jordan_U: I don't think so. I have usb dongle in but it is Belkin, not Nvidia
[21:46] <Jordan_U> janicko: A USB dongle would not show up in "lspci"
[21:46] <slow-motion> n8
[21:47] <janicko> Jordan_U: so what now?
[21:47] <erUSUL> janicko: it will, surpraisingly enough, appear in "lsusb"
[21:47] <kyle_> OK, thanks.  Now looking for java for ubuntu 10.4
[21:47] <econdudeawesome> Howdy! Why would SAK kill all my processes? What is SAK? In a nutshell: If I run too heavy a load on my computer, it "attempts" to restart, but doesn't complete. The only thing I can do is ctrl+alt+del. TTY terminals don't stick around--just restarts
[21:47] <kyle_> simple install??
[21:48] <erUSUL> !java > kyle_
[21:48] <new-user> Hey, how do I let Dbus auto start?
[21:48] <new-user> Everytime I reboot I need to manually type /etc/init.d/dbus restart...How do I make it auto run at boot?
[21:48] <erUSUL> new-user: sudo update-rc.d dbus defaults
[21:49] <new-user> cool thanks:)
[21:49] <janicko> erUSUL: it did, but what should i do from here? Bus 001 Device 006: ID 050d:935a Belkin Components
[21:50] <new-user> how do I force a remake of the update-rc.d dbus defaults?
[21:50] <new-user> it is already in there but it fails at boot
[21:51] <erUSUL> janicko: from what google tells me it is a r2870 based dongle. so try « sudo modprobe -r rt2870sta && sudo modprobe rt2870sta »
[21:51] <W43372> Is there a program I can use to stream movies from my linux machine across my network so that I can watch them on my XBox 360?
[21:51] <erUSUL> janicko: we may need to blacklist rt2800usb.ko module ...
[21:51] <econdudeawesome> http://pastebin.ubuntu.com/477127 is dump of my log--can anyone take a look at it and tell me whats going on here?
[21:51] <ZykoticK9> !upnp | W43372
[21:52] <dagny_taggart> W43372: ushare
[21:52] <W43372> !info mediatomb
[21:52] <erUSUL> janicko: does wlan0 appear after the command i gave you ?
[21:52] <janicko> erUSUL: how would i do that?
[21:53] <erUSUL> janicko: do what?
[21:53] <hiku> W43372: check out - http://blog.beplacid.net/2008/11/24/xbox-360-debianubuntu-linux-media-video-music-streaming/ might be a bit dated but should still work
[21:53] <MTec007> is there a way to make a usb HD safe for removal? its not mounted but it is powered up
[21:53] <W43372> hiku: I'm already installing media tomb.
[21:53] <hiku> W43372: nice...that works too =)
[21:54] <erUSUL> MTec007: if it is umounted it is safe to unplug
[21:54] <janicko> erUSUL: to blacklist rt2800usb.ko module
[21:54] <hiku> MTec007: if the device isn't mounted, then you are ok to remove it
[21:54] <W43372> hiku: Is there a website or some instructions you could point me to that would show me how to work this program after it becomes installed?
[21:54] <MTec007> your positive? thats a hundred dollar mistake i cant fix
[21:54] <hiku> W43372: try - http://mediatomb.cc/pages/documentation
[21:55] <erUSUL> janicko: do this --> « echo "rt2800usb" | sudo tee /etc/modprobe.d/belkin_blacklist.conf »
[21:55] <erUSUL> MTec007: do « sudo eject /dev/sdx » to be extra safe ? but it is not needed
[21:55] <hiku> MTec007: yes, if the device isn't mounted, then there is nothing the linux system can do to it to hurt it.
[21:55] <econdudeawesome> anyone?
[21:55] <janicko> erUSUL: done
[21:56] <erUSUL> janicko: reboot
[21:56] <MTec007> erUSUL, i dont know what device it is
[21:56] <janicko> erUSUL: whole system?
[21:56] <erUSUL> janicko: yes.
[21:56] <hiku> MTec007: if your really worried. mount the drive, rsync the data to the local server, then umount the drive and then remove it.
[21:57] <nika_> hi! is this the right place to ask questions re: should I try weird-to-me install, or better not?
[21:57] <thune3> econdudeawesome: http://www.mjmwired.net/kernel/Documentation/SAK.txt  sounds like sak is supposed to kill stuff. what were you expecting?
[21:57] <janicko> erUSUL: so i let you know what happend, thx for now
[21:57] <erUSUL> janicko: no problem
[21:58] <KE1HA> W43372, see bottom of the page: https://help.ubuntu.com/community/MediaTomb
[21:58] <mleger> hello, I have two repositories for which I am missing public keys, but by the error message I cannot see which repositories need keys. Can anyone help me with this issue? thanks!!
[21:58] <_DGM_> hi! does anybody know what program/package the clock and cpu info bar on the right is.. if even part of ubuntu? http://gnome-look.org/content/preview.php?preview=1&id=109016&file1=109016-1.jpg&file2=109016-2.jpg&file3=109016-3.jpg&name=Avalon
[21:58] <econdudeawesome> ?
[21:59] <thune3> econdudeawesome: your log says SysRq : SAK
[21:59] <Godzilla> _DGM_: looks like a nice theme on gkrellm
[22:00] <Godzilla> _DGM_: but what do I know
[22:00] <mleger> hello, I have two repositories for which I am missing public keys, but by the error message I cannot see which repositories need keys. Can anyone help me with this issue? thanks!!
[22:00] <thune3> econdudeawesome: that alt-sysrq-k, see http://en.wikipedia.org/wiki/Magic_SysRq_key for what it does
[22:00] <erUSUL> !gpgerr
[22:00] <christian_> xdcc list
[22:01] <christian_> !list
[22:02] <_DGM_> Godzilla: well not the theme, i'm just wondering about the information bar on the side with the clock and all that.. seems kinda nice
[22:02] <andyn> !warez
[22:03] <North_Italian69> is it possible to download only the base system (no gdm gui etc)?
[22:03] <Godzilla> _DGM_: it looks like gkrellm, but gkrellm is usually much uglyer than that.
[22:03] <mleger> !gpgerr
[22:03] <_DGM_> Godzilla: oh hm i'll look into it thanks
[22:03] <W43372> if I have an xbox do I change this line to yes? :  <protocolInfo extend="yes"/><!-- For PS3 support change to "yes" -->
[22:03] <Tomwa> I need help. I would like to uninstall the kubuntu package and am having trouble finding out how to remove it all at once
[22:04] <erUSUL> W43372: well the line only mentions ps3. what makes you think you need it ?????
[22:04] <iceroot> !puregnome | Tomwa
[22:04] <W43372> erusul: I don't know because it's a video game console and I don't see anything for xbox
[22:05] <haavaros> When I use empathy or amsn in desktop #1, a button still pops up in the lower taskbar in desktop #2 if I receive a message. Can I disable this?
[22:06] <Tomwa> When I run the kubuntu removal command (The really long one) in the terminal I get the error "E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
[22:06] <Tomwa> E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
[22:06] <Tomwa> "
[22:06] <aeon-ltd> Tomwa: have you got synaptics open? or an apt-get i nprocess?
[22:07] <iceroot> Tomwa: use sudo and check if another process like synaptic or apt-get is running
[22:07] <econdudeawesome> How do I diagnose what causes a kernel panic? I'm pretty sure that's what's happening, but I have no clue if it is, nor how to fix it
[22:08] <Tomwa> Thanks iceroot and aeon
[22:08] <sunnycanuck> Hi. Anyone have the problem logging in to ubuntu? I keep getting bounced back to the login screen.
[22:08] <MTMz> My website looks like crap on linux
[22:08] <ubuntu420> well i found one application that works flawlessly with ubuntu, teamviewer 5
[22:08] <ipc> The font
[22:09] <ipc> I wonder what i can do...
[22:09] <fabio_> you can install it ipc
[22:09] <ubuntu420> i am able to access ubuntu from windows
[22:09] <ipc> I used a widows font like a tool
[22:09] <fabio_> !ttf-mscorefonts-installer
[22:09]  * lap_dragon wonders if there are any stores that work with linux near him
[22:09] <fabio_> info !ttf-mscorefonts-installer
[22:09] <ipc> I need to do it for everyone
[22:10] <ipc> Via the site
[22:10] <tripelb-irssi> I want to switch channels in irssi. I thought that R or L arrow did that. What workds please?
[22:10] <ipc> I call for Tahoma
[22:10] <tripelb-irssi> lap_dragon, where in the world are you?
[22:10] <xangua> fabio_: looks the bot is sleeping :S
[22:10] <fabio_> install the ttf-mscorefonts-installer package
[22:10] <W43372> I'm reading that Mediatomb doesn't work with xbox...
[22:11] <xangua> ipc: basically if you install ubuntu-restricted-extras it will install video and audio codeocs, flash plugin, microsoft fonts, openjdk plugin, etc...
[22:11] <dagny_taggart> W43372: use ushare.  it works
[22:11] <KE1HA> econdudeawesome, you may want to ask the guys in ubuntu-kernel debugging kernel panics can be pretty tricky
[22:11] <ipc> I need a font thats default on linux
[22:12] <ipc> that works like Tahoma
[22:12] <W43372> dagny_taggart: so if I use ushare I'll pick up my linux box and my windows box when browsing the video library on my 360?
[22:12] <tripelb-irssi> I want to switch channels in irssi. I thought that R or L arrow did that. What works please?
[22:12] <dagny_taggart> W43372: yes
[22:13] <W43372> dagny_taggart- is ushare in the software center?
[22:13] <aambrose> tripelb-irssi:  try Ctrl-n, Ctrl-p
[22:13] <KE1HA> econdudeawesome, but here's some ideas: http://www.av8n.com/computer/htm/kernel-lockup.htm
[22:13] <rainrain> what's the best irc client for ubuntu
[22:13] <tripelb-irssi> I want to install xchat, using terminal. How do I find and get the needed repository?
[22:13] <dagny_taggart> W43372: can't remember, don't use it anymore i have a popcornhour.  but it worked for me when i needed it
[22:13] <xangua> !best | rainrain
[22:13] <tripelb-irssi> aambrose: I'll try that
[22:14] <Wiesshund> I have seen the antichrist, and its name is UUID :(
[22:14] <ipc> Konversation is the best
[22:14] <W43372> dagny_taggart; popcornhour?
[22:14] <econdudeawesome> KE1HA: What does a kernel panic look like? It appears my comp is trying to restart, but can't finish. I try to open a tty shell, and it can't stay open. the only log I have is that SAK is killing all my processes
[22:14] <Wiesshund> rainrain mIrc
[22:14] <rainrain> ubutto: sorry i didnt realise i coulnt do that. ... why not btw ?
[22:14] <haavaros> When I use empathy or amsn in desktop #1, a button still pops up in the lower taskbar in desktop #2 if I receive a message. Can I disable this?
[22:14] <Wiesshund> rainrain ubotto is a bot, he cant respond ;)
[22:15] <dagny_taggart> W43372: media box, better streaming capability than the xbox360
[22:15] <tripelb-irssi> rainrain: depends on your preference, GUI or CLI. I like GUI xchat2 not xchat-gnome. but pidgin works. You need to get some experience using one than another
[22:15] <rainrain> oh
[22:15] <tripelb-irssi> rainrain ubottu is an automatic lookup bot
[22:15] <rainrain> can someone else tell me why not
[22:15] <aeon-ltd> tripelb-irssi: lol for someone with irssi in their nick :)
[22:15] <Wiesshund> rainrain simply because opinions are like something else and everyone has thier own
[22:16] <KE1HA> econdudeawesome, I'd say that's an opps, normally it will state "kernel Panic" but In not a Kernel expert. If' is not getting though the kernel, then you've no choice but to go down the Debug route.
[22:16] <trond-> ok. doing a clean re-install. Suggested disk-setup? Whole disk, or manuall partitions? (I want home partition on it's own)
[22:16] <econdudeawesome> rainrain: try #ubuntu-offtopic
[22:16] <econdudeawesome> KE1HA: an opps?
[22:16] <rainrain> thanks for all the replies
[22:16] <aeon-ltd> trond-: manual :) do it to your likings
[22:17] <KE1HA> econdudeawesome, Kenel Panics are notmally stated as such, and the other issues are called "oops", dont aske me why :-)
[22:17] <trond-> aeon-ltd, I will, but which settings is best? boot/root needs? Swat needs double the ram (eq to 3gb)? my disk is 80gb
[22:17] <jasmith> exit
[22:17] <KE1HA> econdudeawesome, here's another example: http://kernelpanic.blogspot.com/2007/03/debugging-kernel-oops.html   they call them "oops" too :-)
[22:18] <econdudeawesome> I would look at it, but using my browser cause sthe problem :-)
[22:18] <janicko> so i lost my helper-friend about my belkin usb  problem. Are you still here? What now?
[22:18] <KE1HA> econdudeawesome, Oh man, you've having a real bad day ...
[22:19] <bichonfrise74> is there a way to auto-arrange your icons on the desktop?
[22:19] <econdudeawesome> KE1HA: Thank goodness for elinks
[22:19] <KE1HA> :-)
[22:19] <bichonfrise74> this is in gnome.
[22:19] <tripelb-irssi> aeon-ltd: I have problems. I cant get 10.04 to install. New drive. I had it formatted at least partitioned. And then gparted started quitting. but only in 10.o4 not in 9.04 so I removed the windows drive (phsyically) used 9.04 liveCD adn unpartitioned the drive. NOW 10.04 hangs before it gets to the partitioner. gparted still "quits unexpectedly" and firefox quits at a random moments notice. I am trying to figure out how to find an
[22:20] <janicko> would somebody help me to install wireless router?
[22:21] <tripelb-irssi> How can fdisk show the existence of a drive that I have physically removed from the system?
[22:21] <tripelb-irssi> How can fdisk show the existence of a drive that I have physically removed from the system? and removed from the setup too.
[22:21] <rainrain> sorry for the windows terminology but i'm looking for an irc client that can "minimise to the tray" .... all i've used so far is chatzilla - any suggestions - i think i would need gui
[22:22] <iceroot> rainrain: xchat
[22:22] <tripelb-irssi> rainrain, the xchat I was recommending will do that
[22:22] <chemical_death> rainrain: KVirc
[22:22] <rainrain> thanks everybody
[22:22] <joshmclvl1> rainrain: I use pidgin but I understand that isn't everyones cup o tea for irc ;) especially if you only use irc
[22:22] <VCoolio> rainrain: you can minimize to tray any app using alltray
[22:22] <karolkens> Irssi :)
[22:22] <KE1HA> tripelb-irssi, which ISO are you using to install 10.04 ?  are you able to start into the instaler at all, as in selecting ur language etc etc ?
[22:22] <tripelb-irssi> joshmclvl1: rainrain pidgen works.
[22:23] <ipc> low blow... speaking of low blows.. hows your sister
[22:23] <Rogue1> ba-dum tsch
[22:24] <janicko> would ther be help for me to get install wireless router belkin model F6D4230-4?
[22:24] <trond-> aeon-ltd, does this sound good: boot 100-120 mb, swap 3gb, home 60-70, rest 10-15gb... today i see that I have 100mb (root/boot), 25gb (rest), 3gb (swap), 51,9 /home
[22:24] <miha> is boinc svn downw?
[22:24] <miha> oops wrong chan :(
[22:24] <joshmclvl1> miha: one sec
[22:25] <tripelb-irssi> KE1HA: thanks for taking me on. I am using a 10.04 disk. I have checked its integrity twice. Yes I can get into the installer. It barfs (hangs) when it should go to the partitioner. I just went into fdisk. Fdisk sees it. ((fdisk also reports a disk, 40G, that I have physically removed from the computer and also taken out of the bios setup. How can this be?
[22:25] <aeon-ltd> trond-: whats 3gb swap for? how much ram do you have?
[22:25] <miha> joshmclvl1 nah, just slow
[22:25] <joshmclvl1> miha:kk
[22:25] <trond-> aeon-ltd, I have 1,5 gb
[22:26] <trond-> aeon-ltd, rule of thumb is double the ram...
[22:26] <aeon-ltd> trond-: i guess thats reasonable
[22:26] <Diverdude> i have a bash script called mountimm, and i just wanted to print the content of the script in the terminal, so i tried to be clever and do $which mountimm | cat    but this only prints the output of which and nothing else. Why cant i pipe it like that?
[22:27] <iceroot> Diverdude: what output you want from the script? are you using echo inside the script?
[22:28] <sunnycanuck> Help,I can't login! I keep getting bounced
[22:28] <Diverdude> iceroot, no i just want to echo the content of the script. cat /usr/local/bin/mountimm works perfectly
[22:28] <sunnycanuck> Back to the login scree
[22:28] <iceroot> Diverdude: and what is the problem when cat is working?
[22:28] <sponzor> i did i fresh install. raid1 and it wont boot. it sas init: ureadahead-other main process (780) and (805) terminated with status 4
[22:29] <ipc> What would i type in google to find a way to set the right font on my website for your os?
[22:29] <Diverdude> iceroot, that i wanted to do it like this:  $which mountimm | cat    so that i did not have to write the actual path to the bash file
[22:30] <ipc> css
[22:30] <iceroot> Diverdude: why the $?
[22:30] <pinpantomalacasi> hello!!!
[22:30] <Diverdude> iceroot oh god..thats just to indicate that its a terminal
[22:30] <pinpantomalacasi> hello
[22:30] <aeon-ltd> ipc: using css you can declare different fonts and fall back fonts
[22:30] <ipc> Please tell me how
[22:30] <janicko> is there help to get wireless router working?
[22:31] <ipc> I have done it
[22:31] <ipc> BUt on linux my site looks like crap
[22:31] <ipc> Its perfect on windows
[22:31] <aeon-ltd> ipc: lets see
[22:31] <iceroot> Diverdude: cat `which mountimm`
[22:31] <ipc> http://mtmlandscaping.com
[22:31] <Diverdude> iceroot, its ridicolous to have to first write which mountimm, look at the output and manually type cat thepath
[22:33] <pinPoint> does anyone know why my accounts on chat are offline after I logout?
[22:33] <pinPoint> 10lts
[22:33] <pinPoint> and switching my self to available is greyed out
[22:34] <ipc> ?
[22:34] <aeon-ltd> ipc: for #navcontainer theres no font declared
[22:34] <karolkens> UtytuBowany
[22:34] <ipc> What the hell was that for?
[22:34] <ipc> I called for a windows font on ever style
[22:34] <pinPoint> ipc:
[22:35] <aeon-ltd> ipc: plus tahoma isn't very universal
[22:36] <karolkens> Anybody knows how to hide join/quit msg on irssi?
[22:37] <Oer> wow
[22:37] <Oer> wow
[22:37] <Oer> wow
[22:37] <Oer> !netsplit
[22:37] <_NG> nice overtake
[22:37] <_NG> lol
[22:37] <ExcruciationX> lol
[22:37] <chemical_death> ipc: the that are most safe to use for web are Arial/Helvetica/Times New Roman/Times/Courier New/Courier
[22:38] <Rogue1> !moo
[22:38] <Lantizia> yay netsplit
[22:38] <Rogue1> aww :(
[22:38] <tripelb-irssi> KE1HA: are we still on?
[22:38] <warpi1> why do we use irc and not XMPP?
[22:38] <Lantizia> Rogue1, ...."Have you mooed today?"...
[22:38] <Rogue1> Can't say I have :D
[22:38] <Lantizia> warpi, backwardsness :)
[22:38] <Oer> wait for the mass-join :-D
[22:38] <tripelb-irssi> <--- has learned how to enable repositories in terminal and start xchat.
[22:38] <warpi1> Lantizia: lol :) ok
[22:39] <Maser> netsplit yo
[22:39] <Maser> c-c-c combobreaker
[22:40] <mkarnicki> wtf was that XD?!
[22:40] <mkarnicki> :D
[22:40] <mkarnicki> I've never seen such mass-join, what was that?
[22:40] <Lantizia> warpi1, it does look cool I admit... obviously jabber related support channels are in xmpp channels hehe :)
[22:40] <Oer> here we go
[22:40] <Oer> wb
[22:40] <mkarnicki> aha
[22:40] <playx> Hi. can i use IP Header Compression in Lan,too? or only over ppp?
[22:41] <ipc> Ya okay, i think thats the leaste of your worrys right now
[22:41] <ipc> lol
[22:41] <ipc> weeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
[22:42] <AndrewMC> !offtopic | ipc
[22:42] <tripelb-irssi> KE1HA: thanks for taking me on. I am using a 10.04 disk. I have checked its integrity twice. Yes I can get into the installer. It barfs (hangs) when it should go to the partitioner. I just went into fdisk. Fdisk sees it. ((fdisk also reports a disk, 40G, that I have physically removed from the computer and also taken out of the bios setup. How can this be?
[22:42] <52AAB0LLX> ?
[22:42] <nerdy_kid> some one want to kill the spam???
[22:42] <52AAB0LLX> kill spam
[22:43] <mkarnicki> netsplit is crazy yo :)
[22:43] <aeon-ltd> tripelb-irssi: try blanking the disk
[22:43] <KE1HA> tripelb-irssi, sri, had a few issues with my main router.
[22:43] <Matthes_> hello. I have no sound on my ubuntu system. :( details here: http://ubuntuforums.org/showthread.php?t=1550797
[22:43] <Joran> hi guys, anyone know how to enable automounting on a liveusb ubuntu?
[22:44] <Tall> channel ubuntu br?
[22:44] <sunnycanuck> Has anyone had the problem of not being able to login? I keep getting bounced backto the login screen. The password
[22:44] <sunnycanuck> Seems
[22:44] <xangua> !pt > Tall
[22:45] <ZykoticK9> sunnycanuck, can you successfully login on VT (ctrl+alt+f1)
[22:45] <tripelb-irssi> Ubuntu 10.04 wont install from the liveCD on a new drive (Yes I did use fdisk on it.) and it hangs when it should go to the partitioner. I need help here.
[22:45] <Tomwa> Can someone help me. For hours I've been working on getting ANY SVN client to work. I've tried tortoise SVN under wine, some random svns from the software center, and kdesvn
[22:46] <tripelb-irssi> aeon-ltd: tell me what "blanking the disk" means. I removed all of the partitions. Can I do more blanking with fdisk?
[22:46] <chemical_death> Matthes_: maybe this one will help http://ubuntuforums.org/showthread.php?t=205449
[22:46] <aambrose> Tomwa: do you use an IDE?
[22:46] <gundas> Hello all. I'm running 9.10 Ubuntu Server and would like to install a torrent client on it which I can access via the web. Does any one have any good ideas?
[22:46] <doubleclicke> commen tcreer un canal sur irc
[22:47] <janicko> could i have help to get my wireless router working?
[22:47] <sunnycanuck> ZykoticK9: no, it responds with incorrect login
[22:47] <ZykoticK9> gundas, TorrentFlux is an option if you're running apache
[22:47] <Matthes_> chemical_death: thanks :)
[22:47] <Tomwa> aambrose: I just need to be able to checkout from an svn repository
[22:48] <tripelb-irssi> RainRain: did it work?
[22:49] <RainRain> tripelb-irssi, thanks - i am trying out xchat at the moment
[22:49] <aambrose> Tomwa:  well, it may not be the "simplest", but installing the svn command-line package, and using 'svn co REPO_URL' is pretty simple...
[22:49] <masoncloud> How can I switch from Full Screen within the Terminal Server Client?
[22:49] <gundas> ZykoticK9: Anything that has been updated recently, I see that TF last change was in 2008
[22:49] <Tomwa> aambrose: how do I go about that I don't care if it's difficult as long as it works
[22:50] <raubvogel> How do I specify which repository to use during a fresh ubuntu install?
[22:51] <aambrose> Tomwa: first, from a command line:  'sudo apt-get install subversion'
[22:51] <RainRain> tripelb-irssi: would you mind please tell me whether this alerted you or not - for some reason it wants to give me name[comma] instead of name[colon]
[22:51] <xangua> raubvogel: ¿¿
[22:51] <ikonia> Tomwa: the subversion client is in the repos and is well supported
[22:51] <chemical_death> masoncloud: try crtl+alt+enter
[22:51] <ZykoticK9> gundas, i believe there are several torrent clients with web frontend - i just haven't used them.  good luck.
[22:51] <raubvogel> xangua: I have a local repository and would like to use it instead (faster!)
[22:52] <aambrose> Tomwa:  next, cd to a directory where you want to put the files, then:  'svn co REPO_URL'
[22:52] <xangua> raubvogel: then you know hot to use !aptoncd ¿
[22:52] <ikonia> raubvogel: what's stopping you ?
[22:52] <RainRain> rainrain, check this out
[22:53] <raubvogel> ikonia: I just do not know in which step of a normal ubuntu install I can select the repository to use
[22:54] <ikonia> raubvogel: you'd have to use the alternative cd
[22:54] <piercedwater> When I try to mount my hfs+ partition in ubuntu, I get this message: https://gist.github.com/387db3f005f5a636efd0
[22:54] <piercedwater> Can anyone help?
[22:54] <ikonia> raubvogel: the noramal ubuntu install, installs from a local cd, so you won't see any benifit to using a local repo
[22:54] <augustus> Can anyone help me revert nvidia driver 256.44 to 256.35?
[22:54] <raubvogel> ikonia: Oh. I was using the server CD and it did not give me the option
[22:55] <ikonia> raubvogel: why do you want to do it from install, it won't be any quicker than a cd
[22:55] <piercedwater> I have also installed hfsutils and tried "hmount" but that gives me errors as well
[22:55] <tripelb-irssi> rainrain, yes, either works. dont pay any attention to that.
[22:55] <ikonia> piercedwater: I suspect you don't have the hfs kernel module loaded
[22:55] <Tomwa> Thank christ it worked much love aambrose
[22:55] <piercedwater> ikonia: do you have a tutoril handy on how to do that?
[22:55] <raubvogel> ikonia:  I do not mind doing the initial install off the CD, but when it is time to get openssh server does it get it off the net of from the CD?
[22:55] <alberto_> ok
[22:55] <aambrose> Tomwa:  coolio
[22:55] <bathacid> is there a way to get better drivers for you video card then the ones under system->admin->hardware drivers?
[22:55] <sunnycanuck> ZykoticK9: As well I can't get in if I start up in recovery mode; but im sure my usr and psswd are correct
[22:56] <ikonia> raubvogel: that's easy post install, just use the software sources tool to point at your local repo, or changes the sources.list file
[22:56] <augustus> yes
[22:56] <mattyok> *question* i have a netbook running 10.04 and some windows extend past the bottom of the screen...what can i do to fix it?
[22:56] <ZykoticK9> sunnycanuck, sorry man - i have no suggestions... good luck.
[22:56] <tripelb-irssi> rainrain, I got xchat to work by using terminal commands. So I can enable someone else re that now.
[22:56] <aeon-ltd> tripelb-irssi: i mean like complete data deletion like Dban
[22:56] <ikonia> piercedwater: not to hand, but there are plenty on the net, it's just a simple modprobe
[22:56] <sunnycanuck> Haha... Thanks..
[22:56] <ZykoticK9> mattyok, hold down alt and you can click/drag windows around
[22:56] <RainRain> tripelb-irssi, sorry about that - thanks
[22:57] <raubvogel> ikonia: The way I am doing is just run a sed script to change the server address to mine.
[22:57] <tripelb-irssi> mattyok: here's a help for you. not a solution but a help. the solution is in the display driver. --> the help. you can press the alt key and then drag the window from any part of the window, not just the drag bar.
[22:57] <ikonia> raubvogel: that works fine
[22:57] <tripelb-irssi> RainRain: np. any time.
[22:58] <piercedwater> shit man, thanksa bunh
[22:58] <tripelb-irssi> mattyok: that way you can get to the buttons at the bottom of the window
[22:58] <mattyok> thank you!
[22:58] <blip-> hi all, where can I find powerdevil ?  it's not in the 10.04 repos
[22:58] <masoncloud> chemical_death: Your advise helped me, thank you!
[22:58] <blip-> I saw a post from 2008 talking about compiling it from source for ubuntu
[22:58] <chemical_death> masoncloud: your welcome
[22:58] <mattyok> what can i fix in the display driver?
[22:58] <Tomwa> How do I execute a batch file in Ubuntu?
[22:59] <ikonia> Tomwa: what "batch file"
[22:59] <tripelb-irssi> aeon-ltd: ok good. now I have never put any data on the drive, just partitioned it. would dban be appropriate?
[22:59] <Tomwa> its a compile script for a java program
[22:59] <Tomwa> compile.bat
[22:59] <ikonia> Tomwa: batch files are for windows
[22:59] <avi__> help! I accidentally deleted all my panels! How can I add them without a prexisting panel or pehaps just return to default panel config? Thanks!
[22:59] <Tomwa> This isn't windows so no cmd prompt lol
[22:59] <raubvogel> ikonia: I guess my question was more about the ubuntu-server: when it asks whether I want to install dns, lamp, openssh, I was wondering if those are being plucked from the cd or from a repository
[22:59] <ikonia> Tomwa: so you won't be able to run it
[22:59] <Tomwa> There
[22:59] <raubvogel> If the former, I am good ot go
[23:00] <ikonia> raubvogel: repos
[23:00] <ZykoticK9> Tomwa, that looks like a windows batch - linux would typically end .sh for a bash/shell script
[23:00] <Tomwa> isnt any program to emulate it?
[23:00] <ikonia> Tomwa: no
[23:00] <carandraug> avi__, I guess you should look into gconf-editor
[23:00] <ZykoticK9> !panels | avi__
[23:00] <tripelb-irssi> mattok, I got my solution from ubuntuforums.org   I had to add things to a file in /etc I think. the first step was an lspci|grep VGA
[23:00] <tripelb-irssi> mattyok: you might want to look up something on that site.
[23:01] <raubvogel> ikonia: So I need to find out how to change the repo before that step... if it is doable at all
[23:01] <headkase314> avi__, http://www.watchingthenet.com/restore-panels-in-ubuntu-back-to-their-default-settings.html
[23:01] <bathacid> are there better drivers for a video card than the system->admin->hardware drivers?
[23:01] <ikonia> raubvogel: post install, just change the repo, then install ssh
[23:01] <avi__> ZykoticK9, Wonderful! That worked great. Thanks a tun!
[23:01] <ZykoticK9> avi__, glad to help
[23:02] <janicko> could somebody help me to get working wireless router?
[23:02] <chemical_death> bathacid: maybe the driver of the factory. if there are drivers for linux systems
[23:02] <bathacid> so just go to nvidia.com
[23:02] <aeon-ltd> tripelb-irssi: wait if this is a fresh disk i don't think dban will help, sorry :(
[23:03] <ikonia> bathacid: what video card do you have
[23:03] <carandraug> bathacid, theoretycal, not in the ubuntu repositories. You may have better drivers but they may be propietary or you may need to compile them yourself
[23:03] <bathacid> 01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9600M GT] (rev a1)
[23:03] <ikonia> bathacid: the ones in the hardware drivers tool should be the most supported I believe
[23:04] <bathacid> reason i say is i cant play the games i use to with out fps lagg on the same computer
[23:04] <headkase314> bathacid, My experience with nVidia is that when a kernel update comes through you are left with non-functional drivers.  Does anyone confirm this and offer a solution for the inevitable kernel update?
[23:04] <ikonia> bathacid: native ubuntu games, or windows games in wine
[23:04] <ZykoticK9> bathacid, i'd personally recommend against nvidia.com drivers - and stick to the officially supported drivers
[23:05] <ZykoticK9> headkase314, that shouldn't happen if you use the nvidia driver from Ubuntu
[23:05] <bathacid> is that because of simplisity or because of problems with the drivers
[23:05] <ZykoticK9> bathacid, both...
[23:05] <cmwslw> i have a cron job that I want to show up in a terminal every time it runs instead of running in the background
[23:05] <headkase314> ZykoticK9, the system I did have it happen on was using nvidia.com drivers.  All the more reason to stick with the official repo in that case! ;)
[23:06] <ZykoticK9> headkase314, agreed!
[23:06] <cmwslw> how can I do this? it seems it's not possible to set a command by invoking gnome-terminal
[23:06] <frxstrem> is it possible to switch from GNOME to KDE without logging out?
[23:06] <bathacid> so is there anything i can do to get my current driver to work better?
[23:06] <ikonia> frxstrem: no
[23:06] <ikonia> bathacid: are you playing games through wine, or native linux games
[23:06] <ZykoticK9> cmwslw, i don't think cron is suppose to be used in that manner???  "gnome-terminal -e COMMAND"
[23:07] <bathacid> the game i am playing requires wine
[23:07] <ikonia> bathacid: ask the guys in #winehq - it may just be a limitation of that game in wine
[23:07] <ikonia> bathacid: not all games work properly
[23:07] <cmwslw> ZykoticK9: i need to be able to see visually that my backup process is running
[23:07] <bathacid> its one of the plat games
[23:07] <cmwslw> but thanks for that option
[23:07] <ikonia> bathacid: it does matter what "type" of game it is
[23:08] <ikonia> bathacid: ask the guys in #winehq
[23:08] <bathacid> o ok
[23:08] <ZykoticK9> cmwslw, why don't you manually run it then, instead of cronning it?
[23:08] <bathacid> kk
[23:08] <thune3> blip-: i'm not kubuntu, but http://www.kde.org/announcements/4.2/desktop.php says "Instead of being a separate tool, PowerDevil is an integral part of KDE...It is configurable within System Settings (under the Advanced tab)". There are some powerdevil libraries installed by kdebase-workspace-bin, which you should already have in kubuntu.
[23:08] <cmwslw> ZykoticK9: never trust backups to be run manually
[23:08] <ubuntu> blip and bob?
[23:09] <chemical_death> cmwslw: look for that there maybe you will find something https://help.ubuntu.com/community/CronHowto
[23:10] <nordle> Hi there, I just asked my dad to use Remmina to connect via SSH tunnel to a PC at home.  My Router showed the connection coming from xx.xxx.xxx.xx,39238.  Should it not have come from 22?
[23:11] <jpds_> nordle: No.
[23:11] <jpds_> nordle: On your end it would be on Destination Port 22.
[23:11] <jpds_> nordle: The Source Port is different though.
[23:11] <cmwslw> chemical_death: i understand cron, i just need a terminal window to open for my command
[23:11] <headkase314> nordle, Network Address Translation -> http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094831.shtml
[23:11] <cmwslw> gnome-terminal -e seems to open a window briefly and close it
[23:11] <piercedwater> Ok, PCManFM is able to see my HFS filesystem,but the command line unbuntu isnt. any ideas?
[23:12] <ZykoticK9> cmwslw, i doubt cron really takes X into account... runs all in a scaled back terminal environment
[23:12] <raubvogel> nordle: port 22 is the port the server opens to listen to incoming crap. The source port can be whatever it wants to be
[23:12] <ikonia> piercedwater: please don't use the language you used last time
[23:12] <piercedwater> ok
[23:12] <nordle> jpds_: Oh.  Every day I realise I know less and less :)  My sshd is on port 44.  My router has a rule to forward everything coming to 44 to 192.168.0.3:44
[23:13] <ikonia> piercedwater: have you checked if the hfs kernel module is loaded as I suggested ?
[23:13] <chemical_death> nordle: 22 is just the port what is listen for that service. (e.g. the server you want access) questions comes from everywhere
[23:13] <piercedwater> isnt it safe to assume it is since pcmanfm recognized my hfs volume
[23:13] <ikonia> piercedwater: no
[23:13] <piercedwater> ok
[23:13] <bindi> anyone know why do I have a green picture when using HDMI on ubuntu 10.04? i3 onboard graphics. worked fine on this monitor, not on TV though
[23:15] <ZykoticK9> bindi, you could see if the nvidia-blue-fix works for you as well?  http://www.wiredrevolution.com/ubuntu/fix-blue-tinted-video-in-ubuntu
[23:15] <bazant> hallo
[23:15] <ZykoticK9> bindi, actually if it's ok with monitor - don't bother...
[23:15] <ikonia> piercedwater: what is the mount command your using ?
[23:15] <bindi> ZykoticK9: everything is green
[23:16] <nordle> Thanks guys!  In this instance the vncserver "closed the connection" according to my dad, thats the message on his client PC.  In the end we disabled both software firewalls (sudo ufw disable) and it worked.  But of course, now I don't know who's firewall was the problem.  His was set to allow 22 for everyone.  Mine was set to allow 44 for everyone.  So why would the VNC server reject the connection, I thought it was supposed to be tunnelled over ssh.  It
[23:16] <nordle> implies it is, asks for key passwords etc.  But it only worked with ufw disable.
[23:16] <bindi> not just some movies
[23:16] <piercedwater> ikonia: "sudo mount hfsplus /dev/sdd1 /mount/point"
[23:16] <bazant> how to clean in my desktop "elisa the open media center"?? (logo)
[23:16] <ikonia> piercedwater: sudo mount -t hfsplus -o rw /dev/sdd1 /mount/point
[23:17] <piercedwater> nope
[23:17] <piercedwater> same error as before
[23:17] <piercedwater> wrong fs type...blah blah
[23:17] <ikonia> same error ?
[23:17] <piercedwater> ill paste, hang on
[23:17] <piercedwater> https://gist.github.com/c717009e4de1584ba813
[23:17] <tripelb-irssi> how can fdisk show the partition table of a disk that has been physically removed from the system. Where would that info be stored?
[23:19] <ZykoticK9> tripelb-irssi, perhaps i'm not understanding your question - as what you are describing sound impossible.
[23:19] <dlbike76> hello.  Is there a gnome frontend to the time program?
[23:19] <ikonia> piercedwater: can you pastebin the output of "sudo fdisk -l /dev/sdd" please
[23:20] <piercedwater> http://pastebin.com/iRLiGB0B
[23:20] <piercedwater> there ya go
[23:21] <ikonia> piercedwater: I wonder if GPT partition format isn't enabled in the kernel
[23:21] <tripelb-irssi> ZykoticK9: yes. that's why I asked.
[23:21] <ZykoticK9> ikonia, piercedwater what is GPT?
[23:22] <thune3> tripelb-irssi: there is some partition like info in /sys/class/block/sda?/start and size files, but i didn't think fdisk used it, and i'm not sure it would still be there after a device is removed.
[23:22] <Chiggins> Hey, yesterday my internet worked on my desktop, but now it doesnt after a restart. I'm sure internet works at my house, its just my desktop that is having problems, how do i fix that
[23:22] <eventi> I can't find the FM for adding a particular package from a different ubuntu release
[23:22] <ikonia> ZykoticK9: different partition table format
[23:22] <eventi> or I'm not googling it right - I'm at karmic and I need a package from lenny
[23:22] <ZykoticK9> ikonia, thanks... never heard of it?
[23:22] <_DGM_> Chiggins: can you give us an output of ifconfig in the console
[23:23] <piercedwater> ikonia: let me see if i can check...
[23:23] <ikonia> piercedwater: just checked, it's supported
[23:23] <ikonia> piercedwater: (well it's in my 10.04 kernel)
[23:23] <Chiggins> _DGM_ yeah one min
[23:23] <piercedwater> hmm
[23:23] <tripelb-irssi> ZykoticK9: something wrong happened and then gparted started crashing. I'm trying to get this wrong info off this brand new drive. ikonia... I appreciate all help. ---- I used fdisk then gparted. then later used gparted (fromt he 9,04 disk) to remove the partitions. Then the install of 10.04 wouldnt work so I got an fdisk listing.
[23:24] <dlbike76> correction - I meant is there a gnome frontend for the date program, or some other local program that I could use to convert local times to and from UTC?
[23:24] <chemical_death> eventi: lenny isn't a different ubuntu system. which package you look for?
[23:24] <ikonia> tripelb-irssi: huh ? what did I say ?
[23:24] <deeeed> hi
[23:24] <eventi> php5-memcache
[23:24] <deeeed> how can I install a .deb made for i386 when I am on a 64bits ?
[23:24] <Chiggins> _DGM_ ifconfig: http://chiggins.pastebin.com/9QFNAjjh
[23:25] <deeeed> is there a way to  froce it ?
[23:25] <ikonia> deeeed: you don't
[23:25] <ikonia> deeeed: you certainly don't try to force it
[23:25] <Diverdude> I am using the following command to mount a remote filesystem to my ubuntu machine:    sshfs path:/  /media/IMM    it works really well. The problem however is that after a while, maybe 30 minutes the connection is somehow destroyed and whenever i try to do anything on /media/IMM it just hangs and nothing happens. This is extremely annoying because the only way i know to solve this is by restarting the compter which is a v
[23:25] <Diverdude> ery bad approach. How may i solve this so that the remote mount is NOT hanging after 30 minutes?
[23:25] <ikonia> piercedwater: hfsplus support seems enabled by default too
[23:25] <deeeed> ikonia, well there is no way to put it with the ia32 libs ?
[23:25] <chemical_death> eventi: did you try "sudo apt-get install php5-memcache" in Terminal?
[23:25] <_DGM_> Chiggins: looks like it didnt detect your network card at all. Is it wired or wireless?
[23:25] <piercedwater> ikonia: that is what I have read, which is why this baffles me so badlt
[23:25] <piercedwater> badly*
[23:25] <ZykoticK9> deeeed, if you really want to force use "sudo dpkg -i --force-architecture $PACKAGE"
[23:25] <Chiggins> _DGM_ Wired care
[23:26] <eventi> Yes - My system is karmic
[23:26] <ikonia> deeeed: not if it needs to be orced
[23:26] <eventi> and I need the version that comes with lenny
[23:26] <eventi> does that make sense?
[23:26] <_DGM_> Chiggins: try sudo ifup eth0 in the console and see if it appears when you do ifconfig after that
[23:26] <chemical_death> eventi: lenny is debian not Ubuntu
[23:26] <ikonia> piercedwater: agreed
[23:26] <eventi> ooooo - worry
[23:26] <eventi> I meant lucid
[23:26] <deeeed> well I will try to force the architecture just in case... thx ZykoticK9
[23:26] <eventi> ugh -
[23:26] <headkase314> ikonia, I had a package of Zsnes (32-bit assembler code) which installed in 64-bit - but that 32-bit program was a specifically built .deb file and it required the 32-bit compatibility libraries to be installed.  That was a stand-alone program so it could be done, with PHP this program is a module within a wider program so I don't think it can be done without making the entire stack 32-bit?
[23:27] <Chiggins> _DGM_ it said Ignoring unknown interface eth0=eth0
[23:27] <elkclone> ubuntu has roots in debian.
[23:27] <ikonia> headkase314: 32bit packages for 64bit arch are built with arch 64bit so they dont need to be forced
[23:27] <eventi> i know - and I've done it in debian, but I can't find the docs
[23:27] <ZykoticK9> elkclone, actually Ubuntu is based off of debian
[23:27] <_DGM_> Chiggins: can you pastebin the contents of /etc/network/interfaces ?
[23:27] <Gerrin> anybody know any applications i can use to stream music im playing and have it accesible over a web browser
[23:27] <tripelb-irssi>  thune3> tripelb-irssi: there is some partition like info in  /sys/class/block/sda?/start and size files, but i didn't think fdisk used it,  and i'm not sure it would still be there after a device is removed.
[23:27] <tripelb-irssi>  ikonia> ZykoticK9: different partition table format
[23:28] <tripelb-irssi> ikonia: you said Zykotick9 - different partition table format (I thought you were commenting on my problem) sorry for my error
[23:28] <ikonia> tripelb-irssi: no need for sorry
[23:28] <Chiggins> _DGM_ http://chiggins.pastebin.com/LLZ3M2y1
[23:28] <eventi> so they both use apt and what I'm trying to do is get the source from lenny and compile it in karmic
[23:29] <eventi> emergency backport, as it were
[23:29] <zopiac> i installed kde for a while, but it switched my login to KDM. I removed kde today and now I have no graphickal login whatsoever! how do I restore it to GDM?
[23:29] <Diverdude> I am using the following command to mount a remote filesystem to my ubuntu machine:    sshfs path:/  /media/IMM    it works really well. The problem however is that after a while, maybe 30 minutes the connection is somehow destroyed and whenever i try to do anything on /media/IMM it just hangs and nothing happens. This is extremely annoying because the only way i know to solve this is by restarting the compter which is a v
[23:29] <Diverdude> ery bad approach. How may i solve this so that the remote mount is NOT hanging after 30 minutes?
[23:29] <_DGM_> Chiggins: interrestingly enough i just found out the new ubuntu 10 seems to handle things a little differently then i'm used to on linux as my file has only loopback aswell.. i'm looking into it though hang on :)
[23:29] <zopiac> dpkg-reconfigure gdm does not work, and I can't unlock gdmsetup to fix it with that
[23:29] <tripelb-irssi> ZykoticK9: this was the result I got http://pastebin.ubuntu.com/477172/   (thune3 too SVP)
[23:30] <Chiggins> _DGM_ Sweet, thanks man
[23:30] <ZykoticK9> tripelb-irssi, sorry man i'm no help with Windows partitions, best of luck.
[23:31] <headkase314> zopiac, are you using a "sudo" with the reconfigure? (need to ask to make sure!) Here is a link too: http://www.howtogeek.com/howto/ubuntu/how-to-switch-between-gdm-and-kdm-on-ubuntu/
[23:32] <tripelb-irssi> thune ZykoticK9  This is no windows. I have only one brand new hard drive on the computer. I want to put Ubuntu 10.04 on it.
[23:32] <tcopeland> Who here uses maverick?
[23:32] <tripelb-irssi> thune3 (corrected name) ZykoticK9  This is no windows. I have only one brand new hard drive on the computer. I want to put Ubuntu 10.04 on it.
[23:32] <ZykoticK9> tcopeland, #ubuntu+1 does
[23:32] <Gerrin> anybody know an application i can use to stream music im playing and be able to access it through web browser
[23:32] <chemical_death> eventi: i looked for but what i found is to add php5 repo of karmic to lucid
[23:32] <tcopeland> I know this
[23:32] <tcopeland> Anyone still use hardy heron?
[23:32] <chemical_death> eventi: are you sure there is a lucid package of that
[23:33] <pwp> Hello, I am having a problem such that my X Window will periodically crash at random intervals... I have a Xorg.0.log if anyone wants to look as well as a listing of the output of lshw -c display. From the log, it would appear to have something to do with AIGLX, as it consistently shows up like that right before it crashes. Thank you. X log: http://pastebin.com/iFNS6KT8  lshw:http://pastebin.com/CafiMuqN
[23:33] <tripelb-irssi> thune3 (corrected name) ZykoticK9  OK I am going to see if I can put 9.04 on it, unless I hear something in the next few minutes.
[23:33] <ZykoticK9> tcopeland, this isn't the place to take polls - #ubuntu-offtopic perhaps?  or do you have a specific question?
[23:34] <tcopeland> I was wondering about hardware support
[23:34] <pwp> tcopeland, I just switched this week.
[23:34] <_DGM_> Chiggins: bleh all this new gui stuff :P anyway.. at the right top of your screen should be an icon for network connections which you can rightclick and then edit connections. Does anything show up in there? eth0 or eth1 for example
[23:35] <lostintime> hey, my roommate wants me to install ubuntu, so I'm trying to decide between ubuntu and arch.  What are the pros and cons?  I'm pretty new to linux
[23:35] <tcopeland> pwp: you switched to or from hardy?
[23:35] <lov255> Hello
[23:35] <Chiggins> _DGM_ the icon isnt there
[23:35] <lov255> My /etc/network/interfaces file got corupt and I need to know how to rebuild it
[23:35] <nordle> I thought the point of Remmina via SSH tunnel was that the server did not need port 5900 open for Inbound VNC traffic.  You just needed the SSH server the accept inbound.
[23:35] <pwp> From hardy to 10.04
[23:35] <_DGM_> thats.. interresting :P ok hmm what about system -> administration -> network tools
[23:36] <tcopeland> Is there a way to enable 3d for nvidia cards without using proprietary?
[23:36] <lov255> _DMG_ do what with the tools?
[23:36] <_DGM_> lov255: that was for Chiggins
[23:36] <lov255> _DGM_ : Only setting is loopback interface(LO)
[23:37] <pwp> I would type in nvidia in the Package Manager, just to see what pops up... I have a Intel Graphics card.
[23:37] <lov255> aut0 dose not show up
[23:37] <Chiggins> _DGM_ alright i opened it
[23:37] <thune3> tripelb-irssi: i'm not clear what you are trying to do, the sdb is a 4GB drive and is likely a usb stick
[23:37] <_DGM_> Chiggins: what interfaces do you see under network device?
[23:37] <lostintime> hey, my roommate wants me to install ubuntu, so I'm trying to decide between ubuntu and arch.  What are the pros and cons?  I'm pretty new to linux
[23:37] <Chiggins> lo, eth0, eth1, wlan0
[23:37] <pwp> Sorry I couldn't be of more help.
[23:38] <Oer> lostintime, try them both side by side.
[23:38] <pwp> lostintime... I only briefly used arch, but esr recommends Ubuntu.
[23:38] <tcopeland> pwp: it's fine I still use maverick, but I was thinking abt tribooting w/ hardy
[23:38] <_DGM_> Chiggins: alright atleast the interfaces are still there thats good. do either eth0 or eth1 say state: active?
[23:38] <lostintime> pwp: esr?
[23:39] <_DGM_> Chiggins: or do any of those 2 have an ip at all
[23:39] <pwp> Eric S. Raymond.
[23:39] <Chiggins> _DGM_ both are inactive, no ip
[23:39] <headkase314> pwp, Seriously? ESR recommends Ubuntu?
[23:39] <Chiggins> _DGM_ brb really quick, bathroom D:
[23:39] <pwp> Look at the hacker howto... I am pretty sure he uses it as well.
[23:39] <_DGM_> Chiggins: try sudo ifconfig eth0 up
[23:40] <piercedwater> ikania: this made it work: http://getsatisfaction.com/jolicloud/topics/mount_an_external_os_x_hfs_sata_guid_gpt_partition_drive_on_jolicloud
[23:40] <_DGM_> Chiggins: or eth1 if that fails
[23:40] <piercedwater> thanks for the help guys
[23:40] <lov255> Anyone able to help me my primary network card will not show up on Network Tools
[23:40] <bobojam> hi is there a channel for ubuntu server users?
[23:40] <lostintime> bobojam: use this one...
[23:41] <pwp> Hacker HowTo: catb.org/esr/faqs/hacker-howto.html
[23:41] <chemical_death> bobojam: try /j #ubutu-server
[23:41] <lostintime> I'll install arch and ubuntu and compare but what should I try to notice about ubuntu?  What are its strong points?
[23:41] <tripelb-irssi> thune3 duh. oh of course.
[23:41] <headkase314> pwp, Yup, ESR is (or at least was as of Edgy) on Ubuntu!  Thanks for that tidbit! ;)
[23:41] <headkase314> pwp, http://lwn.net/Articles/223038/
[23:41] <bobojam> thanks i see it
[23:42] <lov255> _dgm_ I did your suggtion sudo ifconfig eth0 up and now I have ethernet interface option in network tools but still not interent
[23:42] <lostintime> anyone know of good reverse engineering channels?
[23:42] <amr> hello please i need to download ubuntu 10.04.1 how ???
[23:42] <lov255> I am getting Networking Disabled
[23:42] <warpi1> anyone got starcraft 2 (cracked) to work with ubuntu?
[23:42] <_DGM_> lov255: that was all intended for somebody else though :P i can only help 1 person at a time hehe
[23:42] <pwp> Hacker HowTo: http://catb.org/esr/faqs/hacker-howto.html should answer some of your questions about Ubuntu's strong points for beginners.
[23:42] <headkase314> amr, just install 10.04 and the Update Manager will bring you up to current.
[23:42] <tripelb-irssi> thune3 - I want to put ubuntu 10.04 on the big hard drive. Install hangs before the partitioning screen. gparted "quits unexpectedly". But gparted works in 9.04. (all of this is liveCD)
[23:43] <tripelb-irssi> amr: have you googled it in a web browser?
[23:44] <lap_dragon> I think I asked this question before but I didn't get a direct answer. IS Logitec cam software compatible with ubuntu?
[23:44] <lostintime> anyone know of good reverse engineering channels?
[23:44] <tripelb-irssi> amr are you in windows? there are several steps to getting an accurate disk image and are clearly explained on a wb page. I can find it for you if you need that.
[23:44] <amr> headkase314, i need to download the ISO of 10.04.1 ... i already have 10.04 .. i want to save banwidth of installing over many machine
[23:44] <headkase314> amr, Ubuntu Tweak has a section of info about your system and mine if 10.04.1 and I installed from 10.04 media -> http://ubuntu-tweak.com/
[23:44] <nordle> OK, looks like a bug with vino and IPV6.  http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=561440
[23:44] <tripelb-irssi> lap_dragon: some are and some are not.
[23:44] <Chiggins> _DGM_ eth0 is active, but it has no ip, and ping google.com doesnt work
[23:44] <_DGM_> Chiggins: did you try the same with eth1?
[23:45] <tripelb-irssi> lap_dragon: some are and some are not. there is a page that tells. You will have to find out some info from logitec - they have a page with photos and model numbers. that one helped me out a lot. (mine is an older model and did not work.)
[23:45] <Chiggins> _DGM_ nothing is plugged into eth1 right now, should i swap the cord to that one and give it ta try
[23:45] <headkase314> amr, this may be what you are looking for, a private mirror of updates.  Since it's local, it's fast -> http://ubuntuforums.org/showthread.php?t=1044047
[23:45] <pwp> Hello, I am having a problem such that my X Window will periodically crash at random intervals... I have a Xorg.0.log if anyone wants to look as well as a listing of the output of lshw -c display. From the log, it would appear to have something to do with AIGLX, as it consistently shows up like that right before it crashes. Thank you. X log: http://pastebin.com/iFNS6KT8 lshw:http://pastebin.com/CafiMuqN	I realize I posted this, but it was a while ago and I tried o
[23:46] <pwp> n the forums 4 times and something there causes it to crash... Oh yeah, and any Full Screen game aka Tremulous crashes it consistently. The only solution I have found is a reboot.
[23:46] <_DGM_> Chiggins: in rare cases its possible they swapped when you updated. One time my eth0 disappeared and it desided to become eth1. Ofcourse you can put it back but it just likes to do that
[23:46] <lostintime> anyone know of good reverse engineering channels?
[23:46] <pwp> lostintime, what are you trying to do?
[23:46] <zopiac> headkase314: yes I used sudo
[23:47] <lostintime> pwp: I want to help break kindle tivoization
[23:47] <headkase314> zopiac, with sudo I do not know why "sudo dpkg-reconfigure gdm" is not working.  Is there any output you can pastebin for people here?
[23:47] <Chiggins> _DGM_ same result with eth0, active, but no ip or pinging
[23:47] <lostintime> pwp: (using ubuntu)
[23:47] <_DGM_> Chiggins: hm. Does it say dhcp is enabled on those?
[23:48] <Chiggins> _DGM_ Dunno where to check for that
[23:48] <tripelb-irssi> gparted quits on me. I am on the 10.04 livecd. what else can I use?
[23:48] <CkhiKuzad> \o/ i got my CD drive fixed! now i am able to install 10.04
[23:48] <tripelb-irssi> CkhiKuzad: congratulations
[23:48] <pwp> So hardware RE and software RE are two completely different things. I would recommend googling hardware reverse engineering and see where that gets you.
[23:48] <zopiac> headkase314: no, there is no output
[23:48] <CkhiKuzad> but i am installing Windows xp first because i want to play half life again
[23:49] <lostintime> pwp: I see.  Any suggestions on software RE?
[23:49] <headkase314> zopiac, I do not know how to proceed from here.  You had KDE installed and then what?  Recap for everyone else here.. ;)
[23:49] <Chiggins> CkhiKuzas, You can play Half Life on Ubuntu through wine
[23:49] <SealedWithAKiss> Can anybody help me with GRUB? Each time I boot my PC it automatically boots into Linux, and doesn't let me choose my OS.
[23:49] <CkhiKuzad> Chiggins, i have tried and failed on multiple occasions.
[23:49] <lostintime> SealedWithAKiss: hold shift
[23:49] <SealedWithAKiss> lostintime, thanks.
[23:50] <Chiggins> CkhiKuzad, Worked fine for me the first time I tried :)
[23:50] <zopiac> i installed KDE to use something in the packages installed, but I use Gnome and IceWM instead. Since i needed the kde packages no more, i uninstalled it
[23:50] <CkhiKuzad> Chiggins, your video card can use OpenGL, mine cant.
[23:50] <_DGM_> Chiggins: try sudo dhclient
[23:50] <pwp> Not IRC, but just look at any RE tutorial online and it will help you. Assembly (at least being able to read, if not write.) language for the target platform is a must!
[23:50] <Chiggins> CkhiKuzad, ha, lol
[23:50] <zopiac> but now i have no graphickal login screen and cant find a way to change it back to gdm
[23:51] <lostintime> pwp: ok thanks
[23:51] <thune3> tripelb-irssi: i'm not sure what is causing gparted to quit, without error messages. I'd say use what works to get partition table established.
[23:51] <headkase314> zopiac, what if you reinstalled KDE? "sudo apt-get install kuduntu-desktop"?  Would you be willing to try that?
[23:52] <headkase314> zopiac, what if you reinstalled KDE? "sudo apt-get install kubuntu-desktop"?  Would you be willing to try that?
[23:52] <tripelb-irssi> thune3 I had them and this happened. I thought removing them would help. It didnt.
[23:52] <zopiac> bah...i would hardly be willing, since i despise the kdm so much
[23:52] <pwp> One last thing...  Be responsible about what you do. DMCA is a real tough law, so don't try to crack games or something silly like that.
[23:52] <zopiac> if i can figure out a way to make it default to GDM after i reinstall it though, using KDM settings, it might be worth it tho
[23:52] <pwp> *DMCA is wrong in a lot ways, but the law is the law. Breaking it will still get you put away or fined.
[23:53] <lostintime> pwp: If I ever do anything significant, I'll use tor from a local cafe to publish...
[23:53] <Chiggins> _DGM_ http://chiggins.pastebin.com/TWvqc6Js
[23:53] <chemical_death> zopiac: did your try "sudo dpkg-reconfigure xserver-xorg"
[23:53] <headkase314> zopiac, does "sudo apt-get install ubuntu-desktop" pull in something that may be missing?
[23:53] <_DGM_> pwp: that depends on your country. Its legal to reverse engineer in some countries.. but the actual cracking probably isnt. unless you own a copy of the original game and all that
[23:54] <_DGM_> Chiggins: seems like it found an ip on your wlan :P
[23:54] <pwp> Very true, but I am taking the typical American stance and pretending everyone is American. ::P
[23:54] <Chiggins> _DGM_ I didn't even know I had a wireless device installed O.O
[23:54] <_DGM_> Chiggins: what if you do ifconfig now?
[23:54] <thune3> tripelb-irssi: what did you do? write random data to the drive? maybe you need to write zeros to the boot sector?
[23:54] <zopiac> headkase314: yes it does: f-spot firefox firefox-branding firefox-gnome-support gdm-guest-session pulseaudio-module-bluetooth pulseaudio-module-gconf ubufox ubuntu-desktop
[23:54] <lostintime> pwp: I'll use pwp as my handle too :P
[23:54] <zopiac> i will install the gnome-related apps.
[23:54] <_DGM_> Chiggins: you do now unless you have a really messed up config.. but i doubt that :P
[23:55] <_DGM_> pwp: hehehe
[23:55] <headkase314> zopiac, then try the dpkg-reconfigure gdm once those are installed!  Fingers-crossed! ;)
[23:55] <pwp> I don't do RE, just ran across it when learning Assembly.
[23:55] <zopiac> will do!
[23:55] <_DGM_> pwp: i think the american law allows you to reverse engineer and write a paper about it.. but you're not actually allowed to do something with it. something vague like that
[23:56] <pwp> It is really sketchily worded. It can be broadly interpreted, unfortunately in America the one with the most money (i.e. the company) usually wins.
[23:56] <zopiac> headkase314: hmmm...still nothing. I will log in again and try then.
[23:56] <Chiggins> _DGM_ http://chiggins.pastebin.com/9waVR1DT
[23:57] <_DGM_> Chiggins: hmm that eth0:avahi is new to me.. do you have internet at all now?
[23:57] <pwp> Hello, I am having a problem such that my X Window will periodically crash at random intervals... I have a Xorg.0.log if anyone wants to look as well as a listing of the output of lshw -c display. From the log, it would appear to have something to do with AIGLX, as it consistently shows up like that right before it crashes. Thank you. X log: http://pastebin.com/iFNS6KT8 lshw:http://pastebin.com/CafiMuqN	
[23:57] <_DGM_> Chiggins: if not, http://omingo.zorngrid.com/
[23:57] <zopiac> headkase314: still nothing
[23:58] <Chiggins> _DGM_ Apparently I do... ?
[23:58] <headkase314> zopiac, sorry, I don't know where to go from here.  Hopefully someone else can help generate some leads..  Post your situation every few minutes till someone bites?
[23:58] <zopiac> headkase314: yeah, thanks though!
[23:58] <dansan> Hello.  I have an annoying problem on my gf's ubuntu box.  At the login screen and when log onto my account, everything is fine and my resolution is 1920x1080 just like I want it (the 1st entry in the Section "Screen" / Option "metamodes" string, which should be the default)... However, when she logs on to her account, it goes to 640x480 :(  Where can I change this?
[23:58] <_DGM_> Chiggins: you do now? ok grats :P if you dont anymore randomly afterwards use the instructions on that page
[23:58] <headkase314> zopiac, you're welcome! :)
[23:59] <tripelb-irssi> thune3  right. I just discovered that. I did this ---  sudo dd if=/dev/zero of=/dev/sda1 bs=512 count=1  --- is this what you meant?
[23:59] <zopiac> only reason i want gdm back is that i dont know how to get to icewm from CLI login
[23:59] <zopiac> once i login it automatically runs Gnome
[23:59] <Chiggins> _DGM_ Ha weird, well thanks for all the help :)
[23:59] <_DGM_> Chiggins: np :P
[23:59] <Chiggins> What interface is receiving the iinternet?