[02:13] <tmkt> hey hey
[02:13] <tmkt> any reason why i'm not getting 0.23.1 from the repos?
[02:23] <tgm4883> tmkt, you don't have the 0.23.1 repo activated?
[03:37] <tmkt> did a dpkg-reconfigure on mythbuntu-repos
[03:38] <tmkt> and only see 0.23 and 0.24 as options
[04:06] <superm1> tmkt, apt-get dist-upgrade, make sure you get the new mythbuntu-repos
[04:06] <superm1> if you dont get one, then apt-cache policy mythbuntu-repos
[04:16] <Technophil> Can someone check Mythbuntu Widescreen mytharchive buttons for font text please, the text is missing for my 0.23, up to date.
[04:20] <Technophil> bbs
[04:34] <tgm4883> tmkt, you need mythbuntu-repos 8.2
=== qwebirc91252 is now known as Mito-2
[04:47] <Mito-2> Hey all
[04:48] <Mito-2> just getting back into the MythTV thing after being out of it for over 2 years and having an issue I'm hoping someone here can help me with...
[04:48] <Mito-2> I have a new MCE/WMC remote that I'm trying to get to work, but when I use it, a red light comes on the receiver and just stays on
[04:49] <Mito-2> After some research some say its a problem with lirc caused by a recent kernel update
[04:50] <Mito-2> does anyone know anything about this, and is there anything that can be done?
[19:09] <qwebirc42328> hey all, I am trying to configure my ATI X1300 to correctly run tv-out, and I stumbled upon the ATI ArchWiki help page. Unfortunately, upon following their tv-out instructions and configuring xrandr, it keeps throwing this error: BadName(color or font doesn't exist) major opcode: 149 minor opcode: 11. I was wondering if anyone could help me with this?
[19:16] <rhpot1991> qwebirc42328: assuming buy an nvidia card isn't a valid solution :)
[19:30] <qwebirc42328> lol, it definitely isn't unfortunately
[19:36] <qwebirc42328> the problem is i'm getting green and purple crosshatched lines
[19:36] <qwebirc42328> and i figured that the s-video isn't configured properly to display tv-out
[19:37] <rhpot1991> qwebirc42328: any way of setting tv mode output?
[19:37] <rhpot1991> on nvidia you normally specify if its component, composite, svideo, etc
[19:37] <rhpot1991> I haven't touched ati in ages so I prob wont be much use here
[19:39] <qwebirc42328> apparently setting it to auto almost helped, lol. i can read it now
[19:39] <qwebirc42328> i used 'sudo xrandr --output S-video --auto
[19:40] <qwebirc42328> and now it just has dotted horizontal lines
[19:40] <qwebirc42328> but the odd thing is, there's about 6-7 inches of space w/o any dotted lines so
[19:41] <rhpot1991> qwebirc42328: positive its not some dipslay port that has a dongle for it?
[19:42] <qwebirc42328> display port? it's just a standard s-video line from my box to the tv. it's a newer vizio, but I'm trying to make it work with a standard ntsc signal to be compatible with my 1996 hitachi ultravision rear-projected tv
[19:42] <rhpot1991> no no from the video card
[19:43] <rhpot1991> a lot of them started doing dongles out of that svideo like port
[19:43] <rhpot1991> and then you would hook up to that
[19:43] <rhpot1991> then they could do component and such out
[19:43] <qwebirc42328> i see. can you send me a link as an example to the dongle that you would hook up?
[19:43] <rhpot1991> theorizing that you may be bypassing the dongle and getting a weird signal in the process
[19:43] <rhpot1991> qwebirc42328: well it would have came with one
[19:44] <qwebirc42328> because that might be the issue i'm facing. i mean i can see most of the screen. and the card just came with the card, lol
[19:44] <qwebirc42328> but it wasn't in-box. it was used
[19:44] <rhpot1991> qwebirc42328: something like this: http://compeve.com/video-cards/accessories/nvidia-fx-ati-hdtv-adapter-cable-s-video-component-rgb-hd
[19:44] <Zinn> [compeve.com] nVidia FX, ATI, HDTV Adapter Cable,S-Video, Component,RGB, HD [417149-001] - $11.00 : High-End Workstation Graphics, nVidia Quadro FX | ATI FireGL | Matrox | PC, Server Components
[19:44] <rhpot1991> if your card didn't come with one then most likely not
[19:45] <rhpot1991> check your manual
[19:46] <qwebirc42328> it was a $15 card, so it's nothing fancy. but i'm checking it now to see. it's a sapphire ati radeon x1300 i believe. it might not be sapphire but it's the same card
[19:46] <qwebirc42328> it does say that it's hdtv compatible...hmm
[19:47] <qwebirc42328> ooh i have one of those laying around too! sweet
[19:50] <rhpot1991> qwebirc42328: wouldn't hurt to try and plug it in as long as it fits
[19:50] <qwebirc42328> hmm. well i can't locate it but i found a vga to svideo adapter! lol
[19:53] <rhpot1991> qwebirc42328: I have one of those somewhere too, but I wouldn't want to use it ever again
[19:54] <qwebirc42328> bad picture quality?
[19:54] <qwebirc42328> well as far as i can tell so far it's s-video
[19:55] <qwebirc42328> 4-pin s-video only connects via one rca, correct?
[21:32] <jac1d> Hello All.  I have some new OTA channels available in my area.  I have added them to my schedulesdirect.org settings but when I do a mythfilldatabase they don't appear as channels
[21:32] <Zinn> [schedulesdirect.org] Schedules Direct
[21:32] <jac1d> How can I cause the system to update my channel list, removing old channels and including the new ones?
[21:41] <tgm4883> jac1d, did you go into mythtv-setup and grab the updates?
[21:42] <tgm4883> I think you need to go into mythtv-setup and redownload the channellist, I dont' think it adds more automatically if you add them in SD
[21:42] <tgm4883> I could be wrong though
[21:43] <rhpot1991> mythfilldatabase --do-channel-updates I think
[21:43]  * rhpot1991 checks
[21:43] <rhpot1991> I was right
[21:44] <rhpot1991> I had an issue before where it wasn't adding them though, I had to redo my sources to fix it, never figured out why
[21:45] <jac1d> ok, will try do-channel-list in a moment
[21:51] <jac1d> Nope, no luck
[21:51] <jac1d> Still have channels I shouldn't and don' thave the two new ones I added either :S
[21:58] <rhpot1991> jac1d: you may need to scan for channels again, I don't do OTA just clear QAM and cable
[22:00] <jac1d> shouldn't matter that it is ota as I use the SD guide data, not OTA guide data
[22:00] <jac1d> I also want it to forget channels on my other source (IPTV from telco) that it learned... HDs I don't get that SD addded at some point
[22:00] <rhpot1991> jac1d: well I mean in mythtv-setup
[22:01] <rhpot1991> where you click get channels from source
[22:01] <rhpot1991> or scan the signal for them
[22:01] <jac1d> I'll tkae a look... in the past I've blown away the prorgam and channel tables in the db and re-run mythfilldatabase but I haven't fotten around to getting the pw out yet
[23:20] <dewman> anyone use bacula here for backups? I know....Wrong channel.... =)