=== bjf is now known as bjf[afk]
=== bjf[afk] is now known as bjf
=== bjf is now known as bjf[afk]
[01:07] <dcordes> These instructions can be used to work around the locked panel: https://help.ubuntu.com/community/UbuntuNetbookEdition/ConvertGnomeSession
[01:08] <dcordes> It will add une-efl to the gnome session
[01:15] <ogra_ac> dcordes, totally wrong for maverick though
[01:19] <ogra_ac> (and breaks the gnome session)
[01:20] <dcordes> ogra_ac: ok what is right for maverick ?
[02:07] <dcordes> I think it is difficult to close windows with the maximus concept
[06:49] <ajay> hi all, i have connected usb to serial connector ,i need to connect cross null modem female to female cable so i chave connected female to male cross null modem cable
[06:50] <ajay> to which i connected straight female to female null modem cable
[06:50] <ajay> to this i connected DB9 to IDC 10 cable
[06:50] <ajay> does cable length affects for minicom
[06:51] <ajay> due this connection cable length got incresde
[06:51] <ajay> increased
[06:54] <rsalveti> ajay: hey, don't know if you saw what lool wrote about serial and igepv2
[06:54] <rsalveti> seems to be a common issue
[06:55] <rsalveti> <lool>  rsalveti: Plenty of people get this issue with IGEP
[06:55] <rsalveti> <lool>  There is a hardware grounding issue I'm sure
[06:55] <rsalveti> <lool>  one workaround is using a differnt USB serial adapter, or a real PC serial port; another workaround is plugging a mini-USB cable to the IGEP to help grounding
[06:55] <rsalveti> ajay: ^
[06:57] <ajay> rsalveti, thanks but i have tested with different serial adapter getting same issue and other is mini USB ,can you please tell how to solve grounding problem
[06:58] <rsalveti> ajay: if you have a mini-usb cable, you could connect it at igepv2 and your pc
[06:58] <rsalveti> that should help fixing the grounding issue
[06:59] <ajay> rsalveti, i need to get a mini USB cable for this
[07:00] <ajay> mini USB need to connect to pc USB port correct?
[07:00] <ajay> i mean mini USB port to igep and other port to PC USB port
[07:00] <rsalveti> ajay: yep
[07:04] <ajay> rsalveti,if i connect hdmi  cable to board then i am getting just blank screen it means board is somewhat booting till uboot
[07:04] <ajay> am i right?
[07:08] <rsalveti> not sure
[07:10] <ajay> rsalveti, if i change omapfb parameter for boot.ini file then different behaviour shows that is some time signal is not proper
[07:12] <rsalveti> hm, ok, so it seems your kernel is booting
[07:13] <ajay> rsalveti, yes but i am not getting any display on monitor so thought to chech in minicom but there also i am not getting message
[07:13] <ajay> may be as you told grounding issue
[07:14] <ajay> rsalveti, is there any way to debug using ethernet port?
[07:14] <ajay> i mean using PC to PC cable
[07:15] <rsalveti> you first need a working kernel
[07:17] <ajay> rsalveti, that i have downloaded from their website
[07:17] <ajay> a binary image
[09:02] <ajay> rsalveti, i am followed steps for ubuntu 10.10 as mentioned http://labs.igep.es/index.php/How_to_get_the_Ubuntu_distribution
[09:03] <ajay> using wget downloaded image and then created boot.ini and removed MLO,uboot.bin boot.scr from /booot
[09:03] <ajay> and connected minicom and then did power on but with this also i am not getting any message over minicom
[09:04] <ajay> surely something is wrong in my board or setup
[09:05] <ajay> minicom i have setup as per wiki mentioned for minicom8N1 115200
[10:23] <ajay>  rsalveti i  got a mini A USB cable but as you suggested i connected mini A port to igep board where do i need to connect other port of Mini A USB cable
[10:24] <ajay> rsalveti, for solving grounding issue
=== zyga_ is now known as zyga
=== zumbi_ is now known as zumbi
=== JaMa is now known as JaMa|Off
=== ian_brasil___ is now known as ian_brasil
[16:03] <dcordes> go home button messes up onboard: it hides onboard itself along with the floating 'show onboard button' that should be always on top
=== amitk-afk is now known as amitk