[00:02] ledbettj: What graphics hardware? [00:05] @penguin: it's an radeon with KMS [00:06] which one? Open or closed drivers (I assume open from the KMS?) [00:06] yeah, the open source radeon driver [00:08] ledbettj: Hmm I've not tried Unity on mine; you could try running the xorg-edgers bleeding edge X packages and see if it helps at all [00:09] Hi. I'm doing a 1st ppa-based update to a Kubuntu/Maverick rc install. Trying to grab the 'new' KDE 4.5.2 pkgs @ "deb http://ppa.launchpad.net/kubuntu-ppa/ppa/ubuntu maverick main", after 'apt-get update', I'd expect to see *lots* of offered pkg updates by 'apt-get upgrade'. Atm, I only see a couple ~ 30MB worth ... Is there additional prioritization, or some such, required? Still newish to [K]ubuntu [00:13] where can i get the maverick download please? [00:13] http://ubuntu.rave.org [00:13] ok so I overcame all the hurdles in installing a working copy of maverick rc. unfortunately, my wifi interface no longer works under maverick :( [00:13] olskolirc: https://wiki.ubuntu.com/MaverickMeerkat/TechnicalOverview#Get Ubuntu 10.10 [00:14] drbobb: What were the problems, what did you have to do to fix it, and what wireless is it? [00:14] actually, i wanted the kubuntu version a link for that please? [00:15] Hello all [00:15] dev001: there should be at least 148 [00:15] penguin42: BCM4318 [00:15] and I was not able to fix it [00:15] olskolirc: https://wiki.kubuntu.org/MaverickMeerkat/RC/Kubuntu [00:15] ty penguin42 [00:15] I tried replacing the default driver, b43 [00:16] and using ndiswrapper instead [00:16] drbobb: Have you installed the firmware-b43-installer package? [00:16] this worked in lucid, but not anymore [00:16] KukuNut: hm. I'm just seeing this ... http://pastebin.com/sm5n1BgJ [00:16] drbobb: Tried these? https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx [00:17] penguin42: actually I pulled in a copy of the firmware from my lucid install [00:17] How is the xorg working with the gforce 218gt 310m.I could not get this to work in 10.4 [00:17] not much else I can do since I don't have a working network interface [00:17] dmesg shows that the firmware is loaded successfully [00:18] but the link never comes up [00:18] dev001: not sure why [00:19] dev001: it doesn't look like from the konsole? [00:20] penguin42: the STA driver suggested in the doc you pointed to does not support my chi[ [00:20] chip [00:20] ah [00:20] and b43 + fwcutter did not work for me in lucid, either [00:21] KukuNut: sorry, not sure what you're asking ... [00:21] i need a new laptop :( support for my h/w has been regressing in ubuntu with each version [00:22] dev001: your paste doesn't tell me much [00:23] i know how to activate ndiswrapper, have done it lots of times before. this time it loads with no errors, it just doesn't work. [00:23] KukuNut: doesn't tell me much either. that's all that konsole produced. here are my repos, fwiw [00:23] do these look right to you? --> http://pastebin.com/4TZCGGcD [00:25] dev001: seems ok [00:26] KukuNut: thx. no clue why i'm not getting more ... still digging [00:29] well guess I'll just have to stick with lucid until i get a new laptop. bugger [00:32] anyone in here having iussues with Radeon card and installing 10.10 [00:35] where i can look at changes between daily live cds? [00:41] anyone using a macbook pro unibody for 10.10 [00:48] im having big problems with the nvidia gl driver [00:52] Dragon64 (if you are still here) what card? [01:02] this big boy, is going to shave at 1am and then bed... or maybe the hospital for taking an ear off . nite [01:04] ? [01:43] anyone else having issue with Brasero burning REAL slow in Maverick? [01:44] Hi guys, I'm having an issue with my GUI: http://i55.tinypic.com/3142w3s.png -- some things randomly get bugged and stay there (Like the applications menu in that picture) [01:44] myk_robinson I purposely burn CDs on the slowest speed to minimize error possibilities. [01:45] the only way i've found to get rid of it is to logout/in or a restart [01:45] back again cant get round this nvidia glx problem [01:45] rusivi: Understand that, but I sure would like to burn my dvd's at 8 speed instead of 1.0 and lower :( [01:46] edited xorg.conf after a nvidia-xconfig and added in the resolution 800x600 but it didnt boot to login no error on dmesg [01:46] cd's are acceptable, burning at about 16x [01:46] but dvds creep [01:48] anyone have any ideas about my problem? [01:49] hey guys :) Just did an update on 10.10 RC, can anyone tell me how to get Samba back on? I'm using webmin and it won't re-install [01:50] can't get samba to re-install on it's own either [01:50] Got this : samba : Depends: samba-common (= 2:3.5.4~dfsg-1ubuntu8) but 2:3.5.4~dfsg-1ubuntu7 is to be installed E: Broken packages [01:50] will there be an update of samba to fix it? [01:52] never mind, package update fixed it [01:58] cant get nvidia glx drivers working just hangs now [01:58] changed xorg.conf to 800x600 [01:58] plz help :) [02:00] everytime I boot, I have to turn the bluetooth off in the indicator applet to conserve power. Is there a way to only turn it on when I want to use it? I'd like it to remember my last choice [02:04] philsf, System > Preferences > Bluetooth > Show Bluetooth tray icon (or something like that), unmark it. [02:04] But that itself is unlikely to conserve power because it doesn't turn off bluetooth, actually [02:04] Daekdroom, I don't want to hide the applet, I want to turn the device off [02:05] Daekdroom, the applet menu has an entry to turn it off, it just doesn't honor the choice after a boot [02:42] hi, my computer wont boot up... [02:42] ive read the forums without luck :S [02:42] can anybody help me troobleshooting_ [02:42] ? [02:42] kusanagi, well "won't boot up" is very descriptive.. [02:42] let me google "Won't boot up" problems [02:43] does it POST ? [02:43] Ken8521, for maverick you will get plenty of results :) [02:43] yep Volkodav [02:43] do you get grub? [02:43] let me paste syslog somewhere [02:43] yep [02:43] ok, so the problem is after grub. [02:44] yep [02:44] youd on't et an error message, it just freezes up and doesn't boot [02:44] monitor goes power save in vty 7 [02:45] u have ATI? [02:45] tried recovery mode ? [02:45] in vty 1 it get stuck with lots of lines like this Oct 5 17:47:21 tachikoma kernel: [ 13.653830] hda-intel: spurious response 0x400101:0x0, last cmd=0x1f0500 [02:46] no Ken8521, ive got geforce 8400 GS... thats why those "wont bootup" dont seem like mine [02:46] does it boot from live CD ? [02:46] kusanagi, did you use envy to install the nvidia driver? [02:46] yeah, ive tried to start all the kernles availables (.35 both recovery and normal and .32) same results [02:47] Ken8521, i upgrades from 10.04 [02:47] Volkodav, im in a live cd right now [02:47] kusanagi, ok.. did you use envy to install the nvidia graphics under 10.04 [02:48] mmm dont know what envy is... i had the propietary driver installed tho [02:48] http://pastebin.com/7c3qskXC [02:48] and this is the syslog [02:49] doesn't Ubuntu suggest, when you use the proprietary driver, that you uninstall it, before upgrading? [02:49] i read that today Ken8521 :S [02:49] .... [02:49] i didnt uninstall it :( [02:50] i'd be willing to bet that's the issue. [02:50] i'd backup and clean install 10.10(which is what iwould have done in the first place to be truthful) [02:50] can you chroot in the install ? [02:50] i havent try Volkodav, but i guess i can [02:51] what to do after that? [02:51] I would do fsck first , then chroot and try to upgrade the system and see what happens [02:52] Volkodav, i already fsck [02:52] try to upgrade you mean apt-get update and aptitude safe-upgrade? [02:53] then chroot and run apt-get update and apt-get dist-upgrade? [02:56] shiz... i had /var/cache/apt/archives/ mounted on another hd [02:56] this is gonna take a while... [02:56] x) [02:57] hopefully it works [02:57] yep :D [02:58] just to understand why this could work let me ask u a question [02:59] once ubuntu releases the rc, the iso wont change till the final release? [02:59] the rc i downloaded yesterday is the same iso that they first released? [03:00] kusanagi, probably not, because they have to remove the strings "devel" from grub conf, and /etc/issue [03:00] and update the lsb info [03:01] but other than cosmetic changes, they should be the same, AFAICT [03:01] so maybe the problem is solved in the repositories and not in the rc? [03:02] kusanagi, what repositorues? === dto1 is now known as dto [03:03] the rc is *in* the repositories [03:03] mavericks' [03:03] uhm [03:03] when i say rc i mean rc iso [03:04] kusanagi: the iso has already been updated since the rc [03:05] ok [03:05] :) [03:06] i am going to try that [03:09] ok, upgrading :) [03:10] when it finish, do i try to bootup again or do i do anything else first? [03:11] wrong shortcut :S [03:12] the installation says all the time "error in Version string '3.1.4-57640_Ubuntu_karmic': invalid character in revision number" [03:12] kusanagi: reboot after upgrade [03:13] karmic? [03:13] yeah its werid [03:13] it also say jaunty in some errors [03:13] oh ok. [03:14] was just about to ask if you were trying to go 9.10 - 10.10 [03:14] nop :S [03:14] but i did had all those in here [03:14] i know, this need a clean install [03:14] yeah.. sure sounds it. [03:14] but i cant do it now [03:14] somethin got wonked up [03:15] ok, done [03:15] you at the very least(if you have an external hard drive or maybe even a large thumb drive) could probably back up your home on that drive. [03:15] wish me luck :D [03:15] good luck :) [03:15] u have /home in another partition [03:16] i could fresh install and forget about it [03:16] but i dont have the time now [03:17] (do i have the time for this you may ask, the answer is no... i updated out of foolness) [03:17] lol [03:17] brb [03:24] :( [03:24] same problem [03:24] http://pastebin.com/g8Uf9tw [03:24] this is the syslog [03:25] since its probably the graphics card... is there a way to use the nv driver? [03:27] kusanagi: that link didn't work for me [03:27] http://pastebin.com/g8Uf9tww [03:27] sorry ChogyDan, i missed the last w [03:28] got it :) [03:28] kusanagi: so you aren't able to boot at all? [03:28] thanks for watching ChogyDan :) [03:29] i dont know what else could i paste to get the problem [03:29] kusanagi: sorry, I missed what the problem was originally [03:29] borked upgrade [03:30] i upgraded from 10.04 to 10.10 [03:30] now it wont boot up [03:30] kusanagi: how far does it boot? [03:30] screen in vty7 goes energy saving mode [03:31] after grub [03:31] kusanagi: can you get to any of the other ttys? [03:31] that syslog i pasted is all from the last boot [03:31] yep [03:31] vty1 is stuck [03:31] stuck? [03:31] i googled the errors without luck [03:31] frozen [03:32] frozen at sec 13 or so [03:33] I don't see the nvidia error, I just see the audio errors [03:33] yeah, me2 [03:33] :( thats why i dont know what to do [03:33] any other log that could be of any help? [03:33] kusanagi: can you boot with recovery mode? [03:33] it does the same thing [03:33] in recovery mode [03:34] have you tried different kernels? [03:35] yep [03:35] i have 2 [03:35] .35 and .32 [03:35] i tried to boot both modes in both kernels [03:35] same errors [03:36] is there a way to disable the propietary driver and try nv? [03:36] wow, so the terminal will freeze, even in recovery mode? and even on an old kernel? [03:36] just for the sake of trying [03:36] yep [03:36] kusanagi: recovery mode should disable the graphics in the first place I think [03:36] oh :S [03:37] last thing i tried was chroot and apt-get update and apt-get dist-upgrade [03:37] kusanagi: how did that go? [03:37] it upgraded some packages (none really related at first sight) [03:38] and same thing [03:38] hmmm, but a livecd works? [03:39] yup [03:40] kusanagi: outside of my knowledge. I would just make a new partition, and install to that, see how that goes [03:41] i guess i could try a fresh installation on / [03:41] kusanagi: maybe a package got corrupted or something [03:41] i checked md5 [03:42] i made a live cd with unetbootin and 10.10 and wont live usb from there [03:42] dont know why [03:42] should i try fresh install with 10.10 or 10.04? [03:44] kusanagi: you could try debsums, to check for corrupted files [03:46] dont know how to do that ChogyDan :( [03:46] i am just going to fres install 10.04 [03:46] to / [03:46] kusanagi: ok, fyi, I think the command is `debsums -s -a` [03:46] and what does that do? [03:47] kusanagi: it checks the checksums of all the files from your packages [03:47] chroot and do that? [03:47] i can do that [03:47] kusanagi: yeah, it will take awhile though [03:47] kusanagi: http://arthurdejong.org/recovery.html [03:47] yeah, im readin that page [03:47] any luck? [03:48] but i dont know if im tired or what, but i dont understand [03:48] u.U [03:48] not really Ken8521 :S [03:49] kusanagi: well, I think each package has like an md5sum for each of the files that it installs, so debsums compares the md5 listed in the package with the actual md5 of the file [03:49] thus, if a file is changed, debsums will detect the change [03:49] ill try that [03:49] but i guess apt-get already do that when install, doesnt it? [03:50] ? [03:50] mmm, maybe not [03:50] haha === AndrewMC is now known as SpockVulcan [04:12] <|ns|nR8> lucent, latest update fixed the bug where it wouldnt remember refresh rate === SpockVulcan is now known as AndrewMC [04:14] <|ns|nR8> just had to tell someone [04:14] <|ns|nR8> just need /dev/dsp to appear now and im happy [04:18] |ns|nR8: glad to hear that [04:20] <|ns|nR8> i use darkice to stream police radio to friends [04:20] <|ns|nR8> it needs /dev/dsp tho [04:27] |ns|nR8: nothing provides /dev/dsp, you know [04:27] I'm upgrading 10.10/powerpc's KDE -> 4.5.2 @ http://ppa.launchpad.net/kubuntu-ppa/ppa/ubuntu/dists/maverick/main. [04:27] But, there's a very significant difference in what's in the powerpc vs. 'officially supported' arch Package lists: .../binary-amd64/Packages 05-Oct-2010 15:42 --> 418K, versus, .../binary-powerpc/Packages 05-Oct-2010 15:42 --> 89K. [04:27] Is that likely just a propagation issue? or a repo build problem? [04:27] |ns|nR8: there's aoss and then use LD_PRELOAD to intercept calls to use /dev/dsp [04:28] <|ns|nR8> hmm...well /dev/dsp was present in 10.04 [04:28] <|ns|nR8> now it isnt [04:28] <|ns|nR8> and darkice isnt working [04:28] /dev/dsp is fail [04:28] use JACK or ALSA [04:28] <|ns|nR8> so what should i change this to [04:28] <|ns|nR8> device = /dev/dsp # OSS DSP soundcard device for the audio input [04:31] <|ns|nR8> it captures the microphone input on soundcard [04:32] <|ns|nR8> unless i get a different icecast client [04:32] <|ns|nR8> is it only my install that doesnt have dsp lucent ? [04:33] <|ns|nR8> does your install have it ? [04:33] <|ns|nR8> or is it every 10.10 [04:34] <|ns|nR8> ls /dev/dsp [04:34] <|ns|nR8> ls: cannot access /dev/dsp: No such file or directory [04:35] |ns|nR8: nothing I have uses /dev/dsp [04:36] find an icecast client that works with jack [04:36] setup jack [04:37] <|ns|nR8> thanks [04:37] <|ns|nR8> back later, gotta go for minor surgery [04:44] Does anyone have any idea why my NETBOOK WIRELESS is sluggish (as in it takes forever to connect to a network) on 10.10 Desktop Distro? [05:00] hi, after I updated my ubuntu, my apache server is no longer reachable from the computers in my network :S [05:00] any ideas? [05:00] wolter, read the logs first [05:00] also, my samba server is not working [05:00] which logs? [05:01] the apache logs [05:01] or the configuration files of respective package [05:02] well, during the update i was asked if i wanted to replace my configuration with a new one, and i did but i fixed the new one [05:02] i can access my server from the host computer [05:03] but the others can't, like if there was some local dns problem [05:05] In https://bugs.kde.org/show_bug.cgi?id=247183 I find: "Status: RESOLVED; Resolution: WAITINGFORINFO." How can one wait for an info if the status of a bug is "RESOLVED"? [05:05] KDE bug 247183 in Forms "Crash when adding a line edit to a form" [Crash,Resolved: waitingforinfo] [06:56] Is it possible to get the Unity Application Menu from the netbook edition on desktop edition? [07:08] im on maverick and my cdrom is now /dev/sr0 and there is nothing about it in /etc/fstab or /etc/mtab where is my mount? I want it back in /media/cdrom [07:21] yes prince jammys [07:21] should the maverick beta be checking my disk on every boot [07:21] vanilla fstab, ext3 filesystem [07:22] is this a property of the beta? I have never used a beta ubuntu before [07:45] anyone on maverick? i need to know what to put in /etc/fstab so that I can get /dev/sr0 to mount in /media/(no cdrom) === FireCrotch_ is now known as FireCrotch [08:36] After a reboot, my second screen started to flicker. Based on xrandr, the frequency is 50Hz, based on the monitor OSD, it's 60Hz [08:36] Haven't had flicker before, no idea what refresh rate it's been using [09:11] Will Kubuntu come with KDE 4.5 in Meerkat? [09:12] sresu, Yup. [09:12] SaRy, I'm using KDE 4.5 in Lucid already. Will that affect the upgrade? [09:13] in maverick beta it's 4.5.1 .. [09:14] 4 days for the final release .. so it may go to 4.5.2 .. maybe ! [09:14] SaRy: Agreed, but as I'm already using KDE 4.5.1 as the platform version then will upgrade process be affected? Should I untick the backport link from the package manager? [09:15] oh , that am not sure about. [09:16] SaRy: Umm.. thanks anyways [09:23] '~$ ls -al' does not print filenames colorful. '~$ env | grep LS_COLORS' does not produce any output. How to correct that? [09:29] bulldog98, ls --color=auto -F -al === Turgon is now known as Limulf [09:41] Is there a change to vote against the new ubuntu font as default for Kubuntu? The reception of the font at the company where I work is very bad. [09:42] s/change/chance [10:08] hi [10:08] hi. question regarding dropbox on 10.10 - is there a specific ppa for dropbox on maverick? seems like my old ppa is not working anymore & my dropbox has sync issues. [10:15] i cannot add annotations using evince 2.32 on maverick, even though that's supposed to be supported now. [10:28] stupid decision not releasing kde 4.5.2 for 10.04 -.- [10:46] It' a pity, but being careful is not stupid. The trouble is that Kubuntu releases appear at the same time as Ubuntu, and KDE has another release schedule. [10:46] On the other hand, it's a bug fix release, and there *are* bugs fixed [10:53] How can i get the Unity Appmenu in desktop edition? I thought it was meant to be an option for desktop, but I cant find anything about it other than how to install the debugging versions where the appmenu and the menu inside windows both show [11:04] hi, anybody having problems of nautilus not working(not responding) after upgrade to rc Ubuntu 10.10? [11:13] How to determine the default font of the GNOME terminal? [11:17] sandGorgon: I believe gthat you made two mistakes. [11:18] bullgard4, me ? ummm... was I talking to u ? [11:18] sandGorgon: You better check that yourself and behave accordingly. [11:20] bullgard4, huh? I have no clue what u mean.. really. unless my system is spamming IRC or something. could you PM me please ? [11:21] he's bot i guesss [11:21] sandGorgon: I don't see any reason to PM to you. [11:22] i couldn't resist and began upgrading to rc [11:25] Oh I am so very much looking forward to Sunday :) [11:32] 10.10 install disk leaves me with blank screen when trying to install .. anything i can do to get around ? or do i need to use alt install cd ? [11:36] anyone else having jumpy playback with amarok? [11:37] huh, i didn't notice that maverick comes with a new font [11:41] tensorpudding: its "the ubuntu font" ;) [11:41] It's also the first thing to remove on upgrade [11:41] buggy? [11:41] No, ugly [11:42] Well, not ugly, but it doesn't look good either [11:42] maybe needs some time [11:42] I am trying it out. I think it looks okay. [11:42] Something feels wrong about it. Switch back to the default Sans Serif font and compare them. [11:42] It's not as bland as Sans [11:42] dunno, have seen screenshots but that doesnt count [11:43] The Kubuntu website also uses it on the front page, and it's not as readable as a few days ago [11:43] can't see it yet -- upgrade in process (1:45 ... counting) [11:44] Upgrading from Lucid kept the old fonts. [11:44] tensorpudding: Not here [11:44] You can always switch them back. [11:45] at first i thought that what the heck with ubuntu one, why do i need it, but in 10.10 they added tomboy note sync... that turned me [11:45] The main stylistic problem I have with the upgrade was that they tweaked Ambiance to return it to orange highlights. [11:47] I liked how Ambiance had eschewed a lot of the orange tones that made Human such an eyesore [11:50] well I installed vlc and acetone iso but now a problem has crept up, when ever I click places for home folder or dowload folder either vlc, or acetone opens up instead of the targeted folder [11:50] Why should this be how could this be corrected! Can someone help? [11:53] this channel is dying. [11:53] it has 4 days left of its life and then it will later be rebourn a fresh [11:54] i'll keep the logs for necromancy needs [12:02] can some one help win unr wubi? [12:03] NameLess-js: easiest is to write your problem not to ask questions that raise automatic question [12:03] ok. [12:03] so, i install wubi unr in win7 [12:04] i re-imaged my netbook due to problems on win7 [12:04] the reg entry and all the other information about the existance of unr is gone [12:04] wubi doesn't detect anything, but C:\ubuntu still exists [12:05] can i a) run c:\ubuntu\uninstall-ubuntu.exe b)something else [12:06] that is the problem [12:07] don't know, i think it's a wubi related issue/bug, not maverick [12:07] well since wubi is installed this can i ermove ubuntu? [12:08] i found this in the release notes Upgrading Wubi systems from 10.04 LTS is known to fail, and is not recommended at this time [12:08] i used the wubi in the ubuntu 10.10 unr iso [12:15] I upgraded to 10.10, and my dual monitor setup has become strangely broken -- I can display things on one monitor or the other, but not both [12:16] possibly separate xorg servers on separate screens [12:17] Whenever I try to run an ncurses app in a terminal it mysteriously fails, showing "can't open terminal (unknown)". [12:18] LogicalDash: can you do echo $TERM [12:18] penguin42, "dumb" [12:18] LogicalDash: Which terminal - I think there is a bug with a few of them at the moment that doesn't set TERM [12:18] bork: i945GM chipset, two monitors side by side? [12:19] xfterm4 [12:19] so do I just export TERM=xfterm4? [12:19] penguin42: laptop + external monitor, actually [12:19] bork: what does lspci | grep -i vga say? [12:19] well, that didn't work [12:20] LogicalDash: just exprot TERM=xterm [12:20] penguin42: 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller [12:20] penguin42, that worked, thanks [12:20] hi , i just installed ubuntu netbook 10.10 RC bu tin UNE there is no programme's file bar... (file,prefences etc.) [12:20] and i cant edit left bar :( [12:20] bork: OK, can you pastebin your /var/log/Xorg.0.log for me? [12:21] LogicalDash: I think you have bug 621927 [12:21] Launchpad bug 621927 in vte (Ubuntu) "Embedded Terminal Emulator isn't giving a TERM variable" [Low,In progress] https://launchpad.net/bugs/621927 [12:21] penguin42, looks about right [12:22] any body ? [12:23] gezegenci, as I recall, the file bar is replaced by a panel applet in the netbook remix... [12:23] so it might just be working as intended [12:23] LOgicalDash , [12:24] all programmes have this but konversation... [12:24] gezegenci, using a KDE app in that environ might cause weird behavior, I suggest XChat instead [12:25] hmm , so you are saying , "you shouldn't use kde apps" ? [12:26] LogicalDash , thanks for information :) [12:29] * penguin42 goes to get breakfast, if bork comes back can someone tell him to look at bug 619663 [12:29] Launchpad bug 619663 in xserver-xorg-video-intel (Ubuntu) "[maverick] Non-mirrored dual-screen gives narrow display on secondary monitor" [Undecided,Confirmed] https://launchpad.net/bugs/619663 [12:36] Hey guys. I'm trying to install ubuntu NBR 10.10 from a usb stick on my netbook but am running into problems. This (http://ubuntuforums.org/showthread.php?t=1533282) thread sums up my original problem, so I removed ui from the syslinux.cfg file but now I get an "Unknown keyword in configuration file: gfxboot" error. I haven't managed to find an actual fix on the web, just other people saying they have the same problem. Does any [12:37] I also tried commenting out the vesamenu.c32 line as per somebody's recommendation in #ubuntu, but it made no difference [12:37] Mouldy_Punk: your message was too long, ". Does any" was last characters [12:37] *were* [12:37] Does anybody know of a fix? [12:37] (: [12:41] never mind, it hadn't noticed it actually worked because it took a little while from displaying the error to actually doing something so I turned my back :D Commenting out vesamenu.c32 seemed to be the fix [12:45] I just deletes the vesamenu line, and all i had to do was hit enter when it booted. [12:55] Mouldy_Punk: I think if you add lucid_updates to your lucid box that you created the thumb drive on, it should get a new thumb creator that does better [13:20] I am running 10.10.. and have a problem with my 'gateway 192.168.15.1' setting.. if I run 'route add default gw 192.168.15.1' my system connects.. but if I reboot, that gateway info is lost and I need to rerun the route command.. this information IS stored in my /etc/network/interfaces file.. why does it drop when rebooting? [13:22] i like the new font :P [13:27] hi , how can i edit left-bar in "ubuntu netbook 10.10 RC" [13:28] can someone help me get nvidia glx working plz, when i enable nvidia in xorg.conf i get no signal. i input resolution in xorg reboot and hangs before login [13:28] dmesg doesnt output any error [13:39] what time on Sunday is 10.10 released? [13:40] Buffcns2: exactly at gtfo :P [13:40] ;) [13:40] i guess 10:10 ;) [13:41] this is ideal, but actual time is here: http://ubuntuforums.org/showthread.php?t=1588658 [13:44] personaly i would just get the current version now to avoid the overload at official release date ;) [13:45] check [13:46] i will at home on release date or later, to get official experience(tm) too [13:49] works on all 3 boxes pretty silent & without relevant issues [13:54] hi , how can i add an applet to panel (ubuntu netbook RC) [13:56]