[03:32] <aegis> Is there anyway to set sshd_config to allow passwordauthention for 192.168.1.0/24 but any other IP would only allow publickey ?
[04:39]  * flyback anyone thing mabye the whole wikileaks release thing is all a big ploy to get a internet "patriot act" passed?
[04:40] <virmin> Bah!
[04:51]  * flyback bbl
[06:44] <i_is_broke> does anyone know of a good doc on how to setup kvm without a gui on a ubuntu-server?
[08:15] <i_is_broke> ok, does anyone have kvm running on a server with no gui?
[09:13] <helloren> could anyone here help me, and i ask here becouse the ubuntu channal is kinda full right now
[09:13] <helloren> Reading package lists... Done
[09:13] <helloren> Building dependency tree
[09:13] <helloren> Reading state information... Done
[09:13] <helloren> E: Couldn't find package tree
[09:13] <helloren> i keep getting this
[09:13] <helloren> i am tying to install tree to a openssh server
[09:14] <helloren> apt-get install tree and i get
[09:14] <helloren> Reading package lists... Done
[09:14] <helloren> Building dependency tree
[09:14] <helloren> Reading state information... Done
[09:14] <helloren> E: Couldn't find package tree
[09:16] <helloren> i was looking at forms and saw this Reading package lists... Done
[09:16] <helloren> Building dependency tree
[09:16] <helloren> Reading state information... Done
[09:16] <helloren> E: Couldn't find package tree
[09:16] <helloren> sorry
[09:16] <helloren> www.psychocats.net/ubuntu/sources.php
[09:18] <helloren> so i used the apt-get sources deb http://packages.medibuntu.org/ lucid free non-free
[09:19] <helloren> and it said "can not open file"
[10:44] <_ruben> !info tree
[10:44] <_ruben> !info tree lucid
[10:44] <_ruben> helloren: if you have universe component enabled, you should be able to install tree just fine
[10:45] <_ruben> afk again
[11:27] <Madkiss> good morning
[11:39] <un> morning
[12:08] <LinuxAdmin> hi guys
[12:09] <LinuxAdmin> I'm trying to configure pptpd server and everything seems to work between server and client, but I cannot ping internal network hosts
[12:10] <LinuxAdmin> I configured a server on the same public network of the host, so I can test routing
[12:11] <LinuxAdmin> that server knows where to rout the vpn network address but the packets do not get there
[12:12] <LinuxAdmin> I ran tcpdump and I can see packets arriving at ppp0 on the vpn server, but it seems that it's not forwarding those packets
[12:13] <LinuxAdmin> I have packet forwarding configured on the vpn server, I ran "echo 1 > /proc/sys/net/ipv4/ip_forward"
[12:14] <LinuxAdmin> firewal is disabled to troubleshoot
[12:14] <LinuxAdmin> can someone help?
[12:20] <Zeu5> hi there, i set up a ubuntu server on amazon. and now i want to deploy my code on the server via git and projectlocker a git public repo however i appear to have SSH issues because i get prompted for password please advise on how to troubleshoot
[12:21] <Zeu5> i did this cat ~/.ssh/id_rsa.pub and copy pasted the public key into project locker, but i am not sure i am unable to do git pull.
[12:59] <Zeu5> hi there, anyone there?
[13:19] <AstralStorm> Zeu5: never.
[13:19] <AstralStorm> why don't you ask your real question instead?
[13:19] <Zeu5> hi AstralStorm
[13:19] <Zeu5> hi there, i set up a ubuntu server on amazon. and now i want to deploy my code on the server via git and projectlocker a git public repo however i appear to have SSH issues because i get prompted for password please advise on how to troubleshoot
[13:19] <ikonia> Zeu5: I've explained this to you
[13:20] <Zeu5> i did this cat ~/.ssh/id_rsa.pub and copy pasted the public key into project locker, but i am not sure why i am unable  git pull.
[13:20] <AstralStorm> this is fine, you should get prompted for a pass
[13:20] <ikonia> Zeu5: wait for git locker to respond why THEIR application is not accepting your key
[13:20] <Zeu5> AstralStorm: yes you are right i was prompted for a password
[13:20] <AstralStorm> of course your .pub doesn't mean a thing
[13:20] <ikonia> Zeu5: as long as you have the matching private key on your server in the right placfe, then you need to wait for project locker to respond
[13:20] <AstralStorm> what needs to be checked is if the gitlocker uses that key
[13:21] <AstralStorm> and whether your id_rsa is there too
[13:21] <Zeu5> ikonia: i respect your stand. since i explicitly asked you whether i am forbidden to ask questions relating to an official release of AMI, and you did not say no. I wil ask my questions. thank you for your kind assisntace thus far.
[13:21] <AstralStorm> I mean, on the place you're pulling from
[13:21] <ikonia> Zeu5: I've told you the problem
[13:21] <ikonia> Zeu5: your asking the same question over again
[13:21] <AstralStorm> you need id_rsa and id_rsa.pub in your ~/.ssh
[13:21] <AstralStorm> not just the latter
[13:21] <ikonia> Zeu5: if your private key is in the right place, then project locker has to tell you why their server is not accepting your public key
[13:22] <Zeu5> ikonia: i want to talk to AstralStorm . i dont wish to be rude by ignoring you. let me ask AstralStorm a few questions okay?
[13:22] <ikonia> Zeu5: no
[13:22] <Zeu5> AstralStorm: they are there
[13:22] <ikonia> you are wasting peoples time asking the same questions over and over again
[13:22] <Zeu5> i mean id_rsa and id_rsa.pub are in my server's ~/.ssh
[13:23] <AstralStorm> ok, that sounds about right
[13:23] <Zeu5> AstralStorm: am i bothering you with my questions? like what ikonia is saying?
[13:23] <AstralStorm> now, does the other end has your key in ~/.ssh/authorized_keys?
[13:23] <ikonia> Zeu5: if your public key is in the right place then it is project lockers repsponsability to confirm why the public key is not being accepted
[13:23] <Zeu5> AstralStorm: they have a form for me to upload the public key
[13:23] <Zeu5> which i did
[13:23] <AstralStorm> ok
[13:23] <AstralStorm> so it should work
[13:23] <AstralStorm> you should pull with git pull ssh+git://theurl
[13:24] <Zeu5> AstralStorm: and since i was able to successfully do a git push to the public repo from my own ubuntu desktop, i do not think its the public repo's problem
[13:24] <ikonia> Zeu5: your not using your desktop
[13:24] <AstralStorm> well, it might be
[13:24] <ikonia> Zeu5: stop referencing your desktop
[13:24] <Zeu5> i may have done something or not done something with the server
[13:24] <AstralStorm> or it might be a problem on that server
[13:24] <ikonia> Zeu5: I'll say this one last time
[13:24] <AstralStorm> I mean, on your server
[13:24] <ikonia> Zeu5: if your private key is in the right place, and your public key is not working project locker will confirm the problem and resolve it with you
[13:24] <Zeu5> AstralStorm: how shd i troubleshoot? at least to narrow down my possiblities of where i went wrong
[13:24] <AstralStorm> so, take a peek there in that /root/.ssh or /home/foouserthatspulling/.ssh
[13:25] <AstralStorm> so, which user is that git pull ran by?
[13:25] <Zeu5> AstralStorm: okay i am there
[13:25] <AstralStorm> also, sharing keys like that is a bit insecure
[13:25] <Zeu5> AstralStorm: what do you mean by user? sorry today is my first time doing this
[13:25] <AstralStorm> you should make a new key
[13:25] <ikonia> AstralStorm: the user doing a git pull is on a different machine than the server thats failing
[13:25] <AstralStorm> and also upload it via a form
[13:26] <Zeu5> AstralStorm: i did create a new key.
[13:26] <AstralStorm> ikonia: I've figured. now
[13:26] <AstralStorm> Zeu5: ok, and uploaded it too?
[13:26] <Zeu5> and upload it to the public repo form
[13:26] <AstralStorm> hmm
[13:26] <Zeu5> yes.
[13:26] <AstralStorm> ok, is that key in the right place? again, which user is running git pull?
[13:26] <ikonia> its the remote server not taking the key
[13:26] <AstralStorm> (check whoami on that remote server)
[13:27] <ikonia> AstralStorm: he can't, it's a project locker server
[13:27] <AstralStorm> nooo
[13:27] <ikonia> AstralStorm: hence why he needs project locker to tell him, he has no remote access to the server that's failing
[13:27] <AstralStorm> I mean, on the place that's running git pull
[13:27] <ikonia> AstralStorm: that's a differnt machine
[13:27] <Zeu5> ikonia: i am sure there are other people that deserves your assistance and attention more than my case since you deem it as a non case
[13:27] <ikonia> AstralStorm: that one is working
[13:27] <ikonia> AstralStorm: he has one working machine and one failing machine with a different key
[13:27] <AstralStorm> so, he's tryign to pull from two places, one works, the other doesn't
[13:27] <AstralStorm> the other one needs fixing
[13:27] <Zeu5> thank you for your attention would you mind letting me and AstralStorm to ourselves
[13:28] <AstralStorm> I'm asking him to log in to the other and check if the keys are in the right place
[13:28] <ikonia> AstralStorm: the failing machine the remote servers are not taking his key
[13:28] <AstralStorm> Zeu5: so, care to do that?
[13:28] <AstralStorm> if you cannot, then you should ask the admin of it to check it for you
[13:29] <ikonia> praise $deity
[13:29] <Zeu5> AstralStorm: my deployment server is on amazon webservices. there is no server admin. i am the one who used canonical amazon machine images to create an instance
[13:30] <AstralStorm> uh
[13:30] <AstralStorm> there's always some contact form
[13:30] <AstralStorm> use it
[13:30] <Zeu5> AstralStorm: let me go try again to pull
[13:30] <ikonia> Zeu5: the problem is the git repo not taking the key
[13:30] <ikonia> that is project locker
[13:30] <ikonia> contact project locker
[13:30] <ikonia> the repo IS project locker
[13:30] <ikonia> therefore the key has to be on their server
[13:31] <ikonia> you've filled in the form to put the key on their server, and it's not working, it's prompting for a password
[13:31] <AstralStorm> so, there's some misconfiguration in project locker
[13:31] <ikonia> the key is not there/working - so contact them
[13:31] <ikonia> yes
[13:31] <AstralStorm> and that needs to be fixed by their admin
[13:31] <ikonia> yes
[13:31] <ikonia> (or his key is wrong, in which case project locker can confirm)
[14:36] <un> is it possible to install ubuntu onto btrfs yet?
[15:02] <Zeu5> AstralStorm: i am seeking help from github support since i am duplicating the same issues over there as well. thanks for help :)
[15:14] <larsemil> trying to setup a ssh tunnel for my webbrowsing, ssh -D 8080 serverhost and then i set proxy to localhost:8080 but no luck...
[19:56] <iarp> larsemil: can you set SOCKS host on whatever you're using?
[19:59] <larsemil> i got it working thanks
[20:08] <lba_> join #ubuntu-virt
[20:20] <Datz> where can I set default terminal setting?
[20:21] <Datz> I'd like to set UTF-8 as default
[20:26] <lba_> How do I get an invite to join #ubuntu-virt?
[20:31] <pmatulis> lba_: it doesn't exist, redirected here
[20:40] <lba_> pmatulis, Thanks.
[21:45] <nikolaj_basher> Is there a front, program wich can controll domain, mails etc. if I want to have more domains on my server?
[22:26] <k5673> Hello Yo!
[22:26] <k5673> I'm having a issue with vmbuilder.
[22:27] <k5673> When trying to build a lucid vm, no matter if using archive.ubuntu.com or iso option, vmbuilder always fails to install grub.
[22:28] <k5673> The trace points to /usr/lib/python2.6/dist-packages/VMBuilder/plugins/ubuntu/dapper.py
[22:28] <k5673> Somebody with the same problem?
[22:33] <BbluE__> I see someone reported that before as a bug;
[22:33] <BbluE__> https://bugs.launchpad.net/ubuntu/+source/vm-builder/+bug/610652
[22:38] <k5673> OK
[22:38] <BbluE__> Yeah, looking to see if anyone has worked around that, I haven't found anything yet.
[22:39] <k5673> But the output says apt can't find grub
[22:39] <k5673> In the bug's case, apt finds grub and try to install. But i can't even find it in the repos!
[22:57] <ivoks> !webmin
[23:04] <BbluE__> hey k5673, I'm just shootin' in the wind, but you might be able to find a better distro here... http://distrowatch.com/table.php?distribution=ubuntu
[23:05] <RoAkSoAx> ivoks: is there anything in specific you'd like me to discuss at UDS for the Cluster Stack?
[23:06] <ivoks> RoAkSoAx: when is that talk?
[23:07] <RoAkSoAx> ivoks: tuesday
[23:07] <ivoks> RoAkSoAx: do you know what time?
[23:07] <ivoks> ah, i'll check it :)
[23:07] <k5673> I tryed with hardy i386, lucid i386 and amd64, maverick i386 and amd64.
[23:07] <RoAkSoAx> ivoks: 10 am EST
[23:07] <k5673> It doesn't work
[23:07] <RoAkSoAx> ivoks: gmt -5 right now i believe
[23:08] <ivoks> that's 4PM my time
[23:08] <ivoks> sounds good
[23:08] <ivoks> there's no server track?
[23:08] <RoAkSoAx> ivoks: no now there's cloud-server-n or pkgselection-server-n and so on
[23:09] <RoAkSoAx> they have changed the track naming convention
[23:09] <ivoks> yeah, i've noticed
[23:09] <RoAkSoAx> ivoks: anyways, madkiss wants to become Ubuntu Developer now
[23:10] <ivoks> :)
[23:10] <RoAkSoAx> that;s good, more help :)
[23:10] <RoAkSoAx> ivoks: anyways so I guess you will be present
[23:10] <ivoks> i'll try
[23:16] <k5673> Hello. I'm having a issue with vmbuilder under lucid. When trying to build a lucid vm, no matter if using archive.ubuntu.com or iso option, vmbuilder always fails to install grub. It says ['chroot', '/tmp/tmpa5EOR4', 'apt-get', '--force-yes', '-y', 'install', 'grub'] Package grub not found. Is not the https://bugs.launchpad.net/ubuntu/+source/vm-builder/+bug/610652 bug. I tried with hardy i386, lucid i386 and amd64, maverick i386 and amd64.
[23:34] <k5673> Hello. I'm having a issue with vmbuilder under lucid. When trying to build a lucid vm, no matter if using archive.ubuntu.com or iso option, vmbuilder always fails to install grub. It says ['chroot', '/tmp/tmpa5EOR4', 'apt-get', '--force-yes', '-y', 'install', 'grub'] Package grub not found. Is not the https://bugs.launchpad.net/ubuntu/+source/vm-builder/+bug/610652 bug. I tried with hardy i386, lucid i386 and amd64, maverick i386 and amd64.
[23:35] <ivoks> eh?
[23:35] <ivoks> i've created probably 100 domains with vmbuilder on lucid
[23:35] <ivoks> never had this issue
[23:35] <k5673> Can you show me your configuration template for vmbuilder?
[23:36] <ivoks> default one?
[23:36] <k5673> The one you are using
[23:36] <k5673> I need to get this working
[23:36] <ivoks> vmbuilder kvm ubuntu --rootsize=5G --user ivoks -a amd64 --suite lucid --flavour virtual --components=main,restricted,universe,multiverse --lang=en_US --timezone=CEST --addpkg=vim --libvirt=qemu:///system -m 512 --cpus=1 -d naty --hostname=naty
[23:37] <RoAkSoAx> ivoks: btw.. do you have any documentation on which it shows how to setup two different communication paths with corosync?
[23:37] <k5673> And... Installing from archive.ubuntu.com, local repo or iso file?
[23:38] <ivoks> k5673: i used hr.archive.ubuntu.com and local squid proxy
[23:38] <ivoks> RoAkSoAx: nope
[23:38] <RoAkSoAx> ivoks: or should I just add another "interface" directive in a different ring?
[23:38] <k5673> I'll try it. THX!
[23:38] <RoAkSoAx> yes I think that's the case
[23:38] <ivoks> RoAkSoAx: i guess